WorldWideScience

Sample records for ningyo-toge environmental engineering

  1. Implementing of action plans for risk communication on the uranium mining sites remedy at Ningyo-Toge Environmental Engineering Center

    International Nuclear Information System (INIS)

    Yabuta, Naohiro; Kawai, Jun; Hikawa, Tamae

    2005-02-01

    On the closure of uranium production facilities, settled at Ningyo-Toge Environmental Engineering Center and other area in Okayama and Tottori prefectures, action plans for risk communication with residence and local governments were developed and implemented. With the direction of the action plans for risk communication, 'Imaging plan for developing the local area around Ningyo-Toge' were drawn. Furthermore, practical program called Ethnography by High School Students' were developed, which draw the outlines of past and future around Ningyo-Toge with the insights of high school students, and conducted. As the fundamental materials required to conduct the program above, the topography of northern part of Okayama prefecture, the history and cultures of Kamisaibara village, the history of the uranium mining sites at Ningyo-Toge and Japanese nuclear energy development were clarified. Furthermore, Emergency management plans during pursuing of risk communication plans were also developed. (author)

  2. Designing of action plans for risk communication on the uranium mining sites remedy at Ningyo-Toge Environmental Engineering Center

    International Nuclear Information System (INIS)

    Yabuta, Naohiro; Takizawa, Masayuki; Kawai, Jun; Hikawa, Tamae

    2004-03-01

    On the closure of uranium production facilities, settled at Ningyo-Toge Environmental Engineering Center (NTEEC) and other area in Okayama and Tottori prefectures, Action Plans for risk communication with residence and local governments were developed. Firstly, to clarify requirements for risk communication plans, extensive case study for resemblance project of other fields were performed, such as chemical hazards exposure, industrial waste disposal, metal mining site closure and overseas uranium mining site closure. Secondly, with the understanding of societal environment issues around NTEEC, missions of risk communication at NTEEC case were listed. After considerations above, action plans for risk communication on the uranium mining sites remedy at NTEEC were developed. Plans involve several alternatives and were to be performed in building blocks manner. Emergency management plans during pursuing of risk communication plans were also developed. (author)

  3. The calculation and estimation of wastes generated by decommissioning of nuclear facilities. Tokai works and Ningyo-toge Environmental Engineering Center

    International Nuclear Information System (INIS)

    Ayame, Y.; Tanabe, T.; Takahashi, K.; Takeda, S.

    2001-07-01

    This investigation was conducted as a part of planning the low-level radioactive waste management program (LLW management program). The aim of this investigation was contributed to compile the radioactive waste database of JNC's LLW management program. All nuclear facilities of the Tokai works and Ningyo-toge Environmental Engineering Center were investigated in this work. The wastes generated by the decommissioning of each nuclear facility were classified into radioactive waste and others (exempt waste and non-radioactive waste), and the amount of the wastes was estimated. The estimated amounts of radioactive wastes generated by decommissioning of the nuclear facilities are as follows. (1) Tokai works: The amount of waste generated by decommissioning of nuclear facilities of the Tokai works is about 1,079,100 ton. The amount of radioactive waste is about 15,400 ton. The amount of exempt waste and non-radioactive waste is about 1,063,700 ton. (2) Ningyo-toge Environmental Engineering Center: The amount of waste generated by decommissioning of nuclear facilities of Ningyo-toge Environmental Engineering Center is about 112,500 ton. The amount of radioactive waste is about 7,800 ton. The amount of exempt waste and non-radioactive waste is about 104,700 ton. (author)

  4. Environmental remediation activities at the Ningyo-toge Uranium Mine, Japan

    International Nuclear Information System (INIS)

    Saito, Hiroshi; Taki, Tomohiro

    2011-01-01

    Ningyo-toge Uranium Mine is subject to the environmental remediation. The main purposes are to take measures to ensure the radiation protection from the exposure pathways to humans in future, and to prevent the occurrence of mining pollution. The Mill Tailings Pond in the Ningyo-toge Uranium Mine has deposited mining waste and impounded water as a buffer reservoir before it is transferred to the Water Treatment Facility. It is located at the upstream of the water-source river, and therefore, for the environmental remediation, the highest priority has been put to it among many facilities in the Mine. So far, basic concept has been examined and planning has been carried out for the remediation. Also, a great number of data has been acquired, and using the data, some remediation activities have already begun, including designing for the upstream part of the Mill Tailings Pond. According to the current plan, the Mill Tailings Pond will be covered by capping following dewatering and compressing of mill tailings. The capping is composed of 'radon barrier' for lowering radon-gas dissipation and dose rate, and its protection layer. Natural materials are planned to be used for the capping to alleviate the future maintenance. After capping, data will be accumulated to verify the effectiveness of the capping, and if proved effective, it will be utilized for the capping of the downstream part. (author)

  5. CURRENT STATUS AND RECLAMATION PLAN OF FORMER URANIUM MINING AND MILLING FACILITIES AT NINGYO-TOGE IN JAPAN

    International Nuclear Information System (INIS)

    Sato, Kazuhiko; Tokizawa, Takayuki

    2003-01-01

    The Japan Nuclear Cycle Development Institute (JNC) conducted research and development projects on uranium exploration in Japan from 1956 to 1987. Several mine facilities, such as waste rock yards and a mill tailing pond, were retained around Ningyo-toge after the projects ended. Although there is no legal issue in the mine in accordance with related law and agreements at present, JNC has a notion that it is important to reduce the burden of waste management on future generations. Thus, the Ningyo-toge Environmental Engineering Center of JNC proposed a reclamation plan for these facilities with fundamental policy, an example of safety analysis and timetables. The plan has mainly three phases: Phase I is the planning stage, and this paper corresponds to this: Phase II is the stage to perform various tests for safety analysis and site designing: Phase III is the stage to accomplish measures. Preliminarily safety analyses suggested that our supposed cover designs for both waste rock and m ill tailing are enough to keep dose limit of 1mSv/y at site boundaries. The plan is primarily based on the Japanese Mine Safety Law, also refers to ICRP recommendations, IAEA reports, measures implemented overseas, etc. because this is the first case in Japan. For the accomplishment of this plan, it is important to establish a close relationship with local communities and governments, and to maintain a policy of open-to-public

  6. Remediation strategy, capping construction and ongoing monitoring for the mill tailings pond, Ningyo-Toge uranium mine, Japan

    International Nuclear Information System (INIS)

    Hiroshi Saito; Tomihiro Taki

    2013-01-01

    Ningyo-toge Uranium Mine is subject to the environmental remediation. The main purposes are to take measures to ensure the radiation protection from the exposure pathways to humans in future, and to prevent the occurrence of mining pollution. The Yotsugi Mill Tailings Pond in the Ningyo-toge Uranium Mine has deposited mining waste and impounded water as a buffer reservoir before it is transferred to the Water Treatment Facility. It is located at the upstream of the water-source river and as the impact on its environment in case of earthquake is estimated significant, the highest priority has been put to it among mine-related facilities in the Mine. So far, basic concept has been examined and a great number of data has been acquired, and using the data, some remediation activities have already done, including capping construction for the upstream part of the Mill Tailings Pond. The capping is to reduce rainwater penetration to lower the burden of water treatment, and to reduce radon exhalation and dose rates. Only natural materials are used to alleviate the future maintenance. Data, including settlement amount and underground temperature is now being acquired and accumulated to verify the effectiveness of the capping, and used for the future remediation of the Downstream with revision of its specifications if necessary. (authors)

  7. Environmental radiation monitoring around waste ore disposal site in Tottori prefecture: fiscal year 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This document is the compilation of environmental monitoring around waste uranium ore disposal site, near Ningyo-toge mine in Tottori prefecture. The results have been reported to Okayama and Tottori prefectures. The objects for monitoring were river water, drinking water, river sediments, paddy field sediments, air, rice, vegetables, and fruits. (A. Yamamoto)

  8. Uranium milling and conversion at Ningyo-toge Works

    International Nuclear Information System (INIS)

    Takada, Shingo

    1981-01-01

    Based on these experimental results, the refining and conversion pilot plant (annual pro duction capacity 200 t-U) is now under construction, in order to promote further industrialization and to supply UF 6 to the enrichment pilot plant in Ningyotoge works. The new plant has two systems of solvent extraction using tri-n-octylamine, one of which treats the pregnant liquor from the section of heap leach and ion exchange, and the other treats the uranyl sulphate solution in which yellow cake is dissolved. Both of the pregnant solvents are stripped with hydrochloric acid to obtain high grade pregnant eluates (100 g-U). Uranyl sulphate solution from the stripping circuit is reduced to uranous sulphate solution by electrolytic method. In a reduction cell, uranyl sulphate solution and dilute sulphuric acid are used respectively as catholyte and anolyte, and a cation exchange membrane is used to prevent re-oxidation of the uranous sulphate. In this case, reduction power consumption is about 1.5 kWh/kg-U and the reduction rate is over 99.5%. The uranous sulphate solution is then heated to 90 0 C, and UF 4 1 -- 1.2H 2 O (particle size of 50 -- 100 μ) is precipitated continuously with hydrofluoric acid by a new type eouipment which has made it possible to simplify the procedures of liquid-solid separation, drying and granulation. Then the crystal water in uranium tetrafluoride is dehydrated by heating to 350 0 C in an inert gas flow. The conversion of UF 4 to UF 6 is accomplished by a fluidized-bed reactor and high fluorine efficiencies over 99.9% (less than 0.1% of fluorine unreacted) is attained at about 400 0 C with the complete conversion of UF 4 to UF 6 . (J.P.N.)

  9. Introduction of the WAN accelerator in JAEA network

    International Nuclear Information System (INIS)

    Hirayama, Takashi; Kannari, Masaaki; Sato, Tomohiko

    2012-06-01

    In pursuance of 'The Optimization Plan on the network of JAEA', which aims to ensure network reliability and information security and to improve convenience in using the network, we are engaged in the optimization of inter-institute/center network bandwidth. This is a record of an introduction of WAN Accelerator into the network to Ningyo-toge Environmental Engineering Center which bandwidth is limited due to a geographically constraint. (author)

  10. Research of the tasks on risk communication enforcement (Contract research)

    International Nuclear Information System (INIS)

    Tanaka, Masaru; Aoyama, Isao; Ishizaka, Kaoru; Ohata, Yuki; Fukuike, Iori; Miyagawa, Hiroshi; Ishimori, Yuu

    2017-01-01

    From 1955 to 2001, Japan Atomic Energy Agency (JAEA) carried out research and development projects related to uranium exploration, mining, refining, conversion and enrichment at/around Ningyo-toge in Japan. Subsequently, JAEA has been carrying out remediation of the uranium mine legacy sites and decommissioning of the nuclear fuel cycle facilities. JAEA has many experiences of communication with local stakeholders from these projects. Among such experiences, management of the waste rock sites became local concern in 1988, 27 years after completion of the exploration. The issue was resolved in 2012 after several efforts. From this experience, it was suggested that the lack of information sharing with local stakeholders and that the inadequate support to stakeholder's requests caused the delay of problem solving. Therefore, sustainable relationship with local stakeholders for over decades is important for JAEA Ningyo-toge Environmental Engineering Center. As reference, similar domestic cases were investigated and strategies for risk communication were planned. As follows; (1) Clarify roles and responsibilities of communication staffs for sustainable communicating with local residents. (2) Identify gaps in risk communication knowledge among center and local residents and work toward filling those gaps. (3) Improve the effectiveness of Ningyo-toge center's website and PR-magazines as primary mechanism for communicating with wide stakeholders. (4) Investigate new communication methods for sustainable communicating, such as combination of environmental restoration studies by experts and environmental learning activities by residents. (author)

  11. The uranium waste fluid processing examination by liquid and liquid extraction method using the emulsion flow method

    International Nuclear Information System (INIS)

    Kanda, Nobuhiro; Daiten, Masaki; Endo, Yuji; Yoshida, Hideaki; Mita, Yutaka; Naganawa, Hirochika; Nagano, Tetsushi; Yanase, Nobuyuki

    2015-03-01

    Spent centrifuges which had used for the development of the uranium enrichment technology are stored in the uranium enrichment facility located in Ningyo-toge Environmental Center, Japan Atomic Energy Agency (JAEA). Our technology of the centrifugal machine processing are supposed to separate the radioactive material adhered on surface of inner parts of centrifuges by the wet way decontamination method using the ultrasonic bath filled dilute sulfuric acid and water, and it is generated the neutralization sediment (sludge) by the processing of the radioactive waste fluid with the decontamination. JAEA had been considering the applicability of a streamlining and reduction of the processing of the sludge by decreases radioactive concentration including the sludge through the removes uranium from the radioactive waste fluid. As part of considerations, JAEA have been promoting technological developments of the uranium extraction separation using The Emulsion Flow Extraction Method (a theory propounded by JAEA-Nuclear Science and Engineering Center) in close coordination and cooperation between with JAEA-Nuclear Science and Engineering Center and Ningyo-toge Environmental Center from 2007 fiscal year. This report describes the outline of the application test using actual waste fluid of dilute sulfuric acid and water by developed the examination system introducing the emulsion flow extraction method. (author)

  12. Environmental radiation monitoring around waste are disposal site in Tottori prefecture for fiscal year 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-04-01

    This document is the compilation of environment monitoring around waste uranium are disposal site, near Ningyo-toge mine in Tottori prefecture. This result have been to reported to Okayama and Tottori prefectures. The objects for monitoring were river water, drinking water, river sediments, paddy field sediments, air, rice, vegetables, and fruits. (author)

  13. Permission of business of processing nuclear fuel substances in Ningyo-toge Establishment, Power Reactor and Nuclear Fuel Development Corp

    International Nuclear Information System (INIS)

    1986-01-01

    Nuclear Safety Commission presented the report on this problem to the Prime Minister on September 5, 1985, after it had received the report from the Committee on Examination of Nuclear Fuel Safety and carried out the deliberation. The Nuclear Safety Commission had instructed the Committee on Examination of Nuclear Fuel Safety to investigate and discuss this problem on April 11, 1985. The technical capability of the applicant was recognized as appropriate. It was judged that the safety after the permission of this processing business can be ensured. The contents of the investigation and deliberation were the environment condition of the site, the aseismatic design and the countermeasures against fires, the criticality management, the treatment of gas, liquid and solid wastes, the confinement function and radiation control, the other safety design such as in the case of power failure, the movement of radioactive substances and the facilities important for the safety, the exposure dose of general public in the normal operation and the evaluation of accidents. It was confirmed that there was no problem in these points. (Kako, I.)

  14. Removal method of radium in mine water by filter sand

    International Nuclear Information System (INIS)

    Taki, Tomihiro; Naganuma, Masaki

    2003-01-01

    Trace radium is contained in mine water from the old mine road in Ningyo-Toge Environmental Engineering Center, JNC. We observed that filter sand with hydrated manganese oxide adsorbed radium in the mine water safely for long time. The removal method of radium by filter sand cladding with hydrated manganese oxide was studied. The results showed that radium was removed continuously and last for a long time from mine water with sodium hypochlorite solution by passing through the filter sand cladding with hydrated manganese. Only sodium hypochlorite solution was used. When excess of it was added, residue chlorine was used as chlorine disinfection. Filter sand cladding with hydrated manganese on the market can remove radium in the mine water. The removal efficiency of radium is the same as the radium coprecipitation method added with barium chloride. The cost is much lower than the ordinary methods. Amount of waste decreased to about 1/20 of the coprecipitation method. (S.Y.)

  15. Introduction to environmental engineering

    Science.gov (United States)

    Šalić, Anita; Zelić, Bruno

    2018-02-01

    Nowadays we can easily say that environmental engineering is truly an interdisciplinary science. Combining biology, ecology, geology, geography, mathematics, chemistry, agronomy, medicine, economy, etc. environmental engineering strives to use environmental understanding and advancements in technology to serve mankind by decreasing production of environmental hazards and the effects of those hazards already present in the soil, water, and air. Major activities of environmental engineer involve water supply, waste water and solid management, air and noise pollution control, environmental sustainability, environmental impact assessment, climate changes, etc. And all this with only one main goal - to prevent or reduce undesirable impacts of human activities on the environment. To ensure we all have tomorrow.

  16. Architecture of Environmental Engineering

    DEFF Research Database (Denmark)

    Wenzel, Henrik; Alting, Leo

    2006-01-01

    An architecture of Environmental Engineering has been developed comprising the various disciplines and tools involved. It identifies industry as the major actor and target group, and it builds on the concept of Eco-efficiency. To improve Eco-efficiency, there is a limited number of intervention......-efficiency is the aim of Environmental Engineering, the discipline of synthesis – design and creation of solutions – will form a core pillar of the architecture. Other disciplines of Environmental Engineering exist forming the necessary background and frame for the synthesis. Environmental Engineering, thus, in essence...... comprise the disciplines of: management, system description & inventory, analysis & assessment, prioritisation, synthesis, and communication, each existing at all levels of intervention. The developed architecture of Environmental Engineering, thus, consists of thirty individual disciplines, within each...

  17. Architecture of Environmental Engineering

    DEFF Research Database (Denmark)

    Wenzel, Henrik; Alting, Leo

    2004-01-01

    of Eco-efficiency is the aim of Environmental Engineering, the discipline of synthesis – design and creation of solutions – will form a core pillar of the architecture. Other disciplines of Environmental Engineering exist forming the necessary background and frame for the synthesis. Environmental......An architecture of Environmental Engineering has been developed comprising the various disciplines and tools involved. It identifies industry as the major actor and target group, and it builds on the concept of Eco-efficiency. To improve Eco-efficiency, there is a limited number of intervention...... Engineering, thus, in essence comprise the disciplines of: management, system description & inventory, analysis & assessment, prioritisation, synthesis, and communication, each existing at all levels of intervention. The developed architecture of Environmental Engineering, thus, consists of thirty individual...

  18. Environmental Engineering in Mining Engineering Education

    Science.gov (United States)

    Mahamud-Lopez, Manuel Maria; Menendez-Aguado, Juan Maria

    2005-01-01

    In this paper, the current profile of the environmental engineer and the programming of the subject "Environmental Engineering and Technology" corresponding to the studies of Mining Engineering at the University of Oviedo in Spain, is discussed. Professional profile, student knowledge prior to and following instruction as well as…

  19. Environmental education for all engineers.

    Science.gov (United States)

    Jahan, K; Everett, J W; Hesketh, R P; Jansson, P M; Hollar, K

    2004-01-01

    Environmental engineering education at universities is a rapidly changing field globally. Traditionally it has resided in the civil engineering program addressing water and wastewater quality, treatment, design and regulatory issues. In recent years environmental engineering has become a much broader field encompassing water, wastewater, soil pollution, air pollution, risk assessment, ecosystems, human health, toxicology, sustainable development, regulatory aspects and much more. The need to introduce environmental engineering/green engineering/pollution prevention/design for the environment concepts to undergraduate engineering students has become recognized to be increasingly important. This need is being driven in part through the US Engineering Accreditation Commission Accreditation Board for Engineering and Technology criteria 2000. Thus there has been a major shift in environmental engineering education and it no longer resides only within the civil engineering discipline. This paper focuses on the development of innovative curricula for a brand new engineering program at Rowan University that integrates environmental education for all engineers. A common course known as "engineering clinic" was developed for all engineering students throughout their eight semesters of engineering education. One of the clinic goals is to integrate engineering design and the environment. The program, in its seventh year, indicates successful implementation of environmental education in all four engineering disciplines in their course work and clinics.

  20. Environmental engineering. 3. ed.

    International Nuclear Information System (INIS)

    Foerstner, U.

    1992-01-01

    This introductory textbook has been written in response to the demand for information on environmentally sound techniques and methods. On the basis of the knowledge taught in traditional engineering sciences, and referring to it, the author explains the specific problems encountered in the various environmental sectors, and reviews and discusses the technical solutions available or possible. In this process, there is, of course, opportunity or reason enough to refer to ecologic, economic, ethical or legal aspects, too. The book takes pollutants in a very general sense, their origin (sources), dispersion or transport, and their effects on the environment, as a red thread leading to the relevant technical equipment or engineering methods for problem solution in the various environmental sectors. An extensive and detailed bibliography points to literature for further reading. This third edition under review focusses on environmental problems in the eastern states of the Federal Republic: an account of the situation there refers to 'water' (catchment area of the Elbe river), 'soil' (long-standing pollution due to the mining industry in Thueringen and Sachsen), and 'air' (dispersion of pollutants, radon in uranium mines). The chapter 'Pollutants' now contains references to the handling of noxious chemical in accordance with the Ordinance on transport and handling of dangerous goods, explains the (mis)-development in the chlorine industry, shows the different dispersion processes of organic chemicals, etc. The chapters 'waste' and 'recycling' now part more emphasis on showing the significance of short- or medium-termed measures for prevention or rentilization of waste. (orig.) With 116 figs [de

  1. Environmental Engineering and Sustainable Development

    OpenAIRE

    Said Salah Eldin Elnashaie

    2018-01-01

    Chemical Engineering is a very rich discipline and it is best classified using System Theory (ST) and utilized using the Integrated System Approach (ISA). Environmental Engineering (EE) is a subsystem of Chemical Engineering and also a subsystem of Sustainable Development (SD). In this paper both EE and SD are discussed from a Chemical Engineering point of view utilizing ST and ISA.

  2. Environmental, safety, and health engineering

    International Nuclear Information System (INIS)

    Woodside, G.; Kocurek, D.

    1997-01-01

    A complete guide to environmental, safety, and health engineering, including an overview of EPA and OSHA regulations; principles of environmental engineering, including pollution prevention, waste and wastewater treatment and disposal, environmental statistics, air emissions and abatement engineering, and hazardous waste storage and containment; principles of safety engineering, including safety management, equipment safety, fire and life safety, process and system safety, confined space safety, and construction safety; and principles of industrial hygiene/occupational health engineering including chemical hazard assessment, personal protective equipment, industrial ventilation, ionizing and nonionizing radiation, noise, and ergonomics

  3. Environmental engineering education enhancement

    Science.gov (United States)

    Caporali, E.

    2012-04-01

    Since higher education plays a central role in the development of both human beings and modern societies, enhancing social, cultural and economic development, active citizenship, ethical values and expertises for a sustainable growth, environment respectful, the European Commission promotes a wide range of programmes. Among the EC programmes, the TEMPUS - Trans European Mobility Programme for University Studies, with the support of the DG EAC of the European Commission, has contributed to many aspects of general interest for higher education. Curricula harmonization, LifeLong Learning Programme development, ICT use, quality assessment, accreditation, innovation learning methods, growth of networks of institutions trusting each other, are the focused aspects. Such a solid cooperation framework is surely among the main outcomes of the TEMPUS Projects leaded by the University of Firenze UNIFI (Italy), DEREC - Development of Environment and Resources Engineering Curriculum (2005-2008), and its spin-off DEREL - Development of Environment and Resources Engineering Learning (2010-2013), and VICES - Videoconferencing Educational Services (2009-2012). DEREC and DEREL TEMPUS projects, through the co-operation of Universities in Italy, Austria, Germany, Greece, Macedonia, Albania and Serbia, are aimed at the development of first and second level curricula in "Environment and Resources Engineering" at the Ss. Cyril and Methodius University - UKIM Skopje (MK). In the DEREC Project the conditions for offering a joint degree title in the field of Environmental Engineering between UNIFI and UKIM Skopje were fulfilled and a shared educational programme leading to the mutual recognition of degree titles was defined. The DEREL project, as logical continuation of DEREC, is aimed to introduce a new, up-to-date, postgraduate second level curriculum in Environment and Resources Engineering at UKIM Skopje, University of Novi Sad (RS) and Polytechnic University of Tirana (AL). following

  4. Report on evaluation of research and development works in FY2000 (evaluation after research activities). Evaluation work title 'Development of recovered uranium conversion technology'

    International Nuclear Information System (INIS)

    2001-03-01

    The Japan Nuclear Cycle Development Institute carried out development of recovered uranium conversion technology (hereinafter referred to as 'this development technology') at the Ningyo Toge Environmental Engineering Center. The objects of this work were development of technologies for structure of recovered uranium conversion plant coordinated with private reprocessing plants and for an actual proof of recovered uranium recycle. We set high value on this development technology, because it was carried out under the good objects and programs and achieved the purpose, which contained the recovered uranium recycle and important technologies for future commercial conversion plant. On conversion process, the uranium reactivity was improved by the hydration method. The best hydration conditions of recovered uranium conversion process were 2.1 ± 0.1 mole ratio of H 2 O/UO 3 and at 40 ± 5degC. The service conditions of each conversion process were determined. An elimination process of FP and TRU in the recovered uranium was established. The results of maintaining safety of treatment of recovered uranium and development of the analytical technologies for estimation of behavior of radioactive impurity nuclide were very useful. The driving results of the commercial conversion facility made determine the technical conditions. This report is consisted of abstract, construction of the evaluation committee, deliberation process, evaluation method, results and references: evaluation after research activities, measure of evaluation results, opinion of the cycle development institute and answer for questions of evaluation committee and development of recovered uranium conversion technology. (S.Y.)

  5. Counselors as Environmental Engineers

    Science.gov (United States)

    Matheny, Kenneth

    1971-01-01

    Counselors should engineer extending and corrective experiences for their counselees. If appropriately selected, such experiences can prove a powerful adjunct to the more traditional counseling relationship. Counselors can use school and community experiences to accomplish guidance goals. (Author)

  6. THERMODYNAMICS USED IN ENVIRONMENTAL ENGINEERING

    Science.gov (United States)

    Thermodynamics is a science in which energy transformations are studied as well as their relationships to the changes in the chemical properties of a system. It is the fundamental basis of many engineering fields. The profession of environmental engineering is no exception. In pa...

  7. Engineering proteins for environmental applications

    NARCIS (Netherlands)

    Janssen, Dick B.; Schanstra, Joost P.

    1994-01-01

    Recently, significant new insight has been obtained into the structure and catalytic mechanism of enzymes that convert environmental pollutants. Recent advances in protein engineering make it possible to use this information for improving the catalytic performance of such enzymes to achieve

  8. Transport phenomena in environmental engineering

    Science.gov (United States)

    Sander, Aleksandra; Kardum, Jasna Prlić; Matijašić, Gordana; Žižek, Krunoslav

    2018-01-01

    A term transport phenomena arises as a second paradigm at the end of 1950s with high awareness that there was a strong need to improve the scoping of chemical engineering science. At that point, engineers became highly aware that it is extremely important to take step forward from pure empirical description and the concept of unit operations only to understand the specific process using phenomenological equations that rely on three elementary physical processes: momentum, energy and mass transport. This conceptual evolution of chemical engineering was first presented with a well-known book of R. Byron Bird, Warren E. Stewart and Edwin N. Lightfoot, Transport Phenomena, published in 1960 [1]. What transport phenomena are included in environmental engineering? It is hard to divide those phenomena through different engineering disciplines. The core is the same but the focus changes. Intention of the authors here is to present the transport phenomena that are omnipresent in treatment of various process streams. The focus in this chapter is made on the transport phenomena that permanently occur in mechanical macroprocesses of sedimentation and filtration for separation in solid-liquid particulate systems and on the phenomena of the flow through a fixed and a fluidized bed of particles that are immanent in separation processes in packed columns and in environmental catalysis. The fundamental phenomena for each thermal and equilibrium separation process technology are presented as well. Understanding and mathematical description of underlying transport phenomena result in scoping the separation processes in a way that ChEs should act worldwide.

  9. Fuzzy control in environmental engineering

    CERN Document Server

    Chmielowski, Wojciech Z

    2016-01-01

    This book is intended for engineers, technicians and people who plan to use fuzzy control in more or less developed and advanced control systems for manufacturing processes, or directly for executive equipment. Assuming that the reader possesses elementary knowledge regarding fuzzy sets and fuzzy control, by way of a reminder, the first parts of the book contain a reminder of the theoretical foundations as well as a description of the tools to be found in the Matlab/Simulink environment in the form of a toolbox. The major part of the book presents applications for fuzzy controllers in control systems for various manufacturing and engineering processes. It presents seven processes and problems which have been programmed using fuzzy controllers. The issues discussed concern the field of Environmental Engineering. Examples are the control of a flood wave passing through a hypothetical, and then the real Dobczyce reservoir in the Raba River, which is located in the upper Vistula River basin in Southern Poland, th...

  10. Surface engineering and environmental issues

    International Nuclear Information System (INIS)

    Aguero, A.

    2007-01-01

    Surface engineering addresses the modification of the microstructure and/or composition of the surface of components by mechanical, physical or chemical methods that may imply adding a material in order to change the surface properties of said components. One of its most important consequences is the significant increase of the useful life of a variety of components in a large number of industrial applications. Moreover, it contributes to energy savings by increasing efficiencies as it allows higher combustion temperatures, by allowing the use of lighter components and by significant friction reduction. In this paper, surface engineering is introduced, as well as its different modalities, examples of industrial applications and positive and negative environmental impacts. (Author) 29 refs

  11. Ultrasound in environmental engineering. Papers

    Energy Technology Data Exchange (ETDEWEB)

    Tiehm, A.; Neis, U. [eds.

    1999-07-01

    This book presents recent research and state-of-the-art information on the scientific basis, modes of use, and engineering developments of ultrasound application in the field of environmental protection. The information is loosely grouped into the following themes: ultrasound and sonochemistry, design of sonoreactors, applications in water, waste water and sludge treatment: aggregation of suspended particles, degradation of hazardous pollutants, disinfection, disintegration of biosolids. Ultrasound is generated and applied at frequencies from 20 kHz to several MHz. Reactor design, applied intensity, duration of sonication, and physico-chemical parameters of the sonicated media influence ultrasound effects. Thus, ultrasound, at a first glance, is a complex and probably confusing matter. This book has been compiled from presentations held at the first workshop 'Ultrasound in Environmental Engineering' on March 22nd and 23rd, 1999, at the Technical University of Hamburg-Harburg in cooperation with the German Association for the Water Environment (ATV) and the DECHEMA e.V. (orig.)

  12. The WLB market survey environmental engineering 1995

    International Nuclear Information System (INIS)

    Schmitz, H.J.

    1994-01-01

    This book contains adresses of authorities and organisations active on the held of environmental protection and a survey of product groups, software producers and list of suppliers of components and aggregates for environmental engineering. (orig.) [de

  13. Environmental Engineering in the Slovak Republic

    Science.gov (United States)

    Stevulova, N.; Balintova, M.; Zelenakova, M.; Estokova, A.; Vilcekova, S.

    2017-10-01

    The fundamental role of environmental engineering is to protect human population and environment from impacts of human activities and to ensure environmental quality. It relates to achieving the environmental sustainability goals through advanced technologies for pollutants removing from air, water and soil in order to minimize risk in ecosystem and ensuring favourable conditions for life of humans and organisms. Nowadays, a critical analysis of the environment quality and innovative approaches to problem solving in order to achieve sustainability in environmental engineering, are necessary. This article presents an overview of the quality of the environment and progress in environmental engineering in Slovakia and gives information regarding the environmental engineering education at Faculty of Civil Engineering at Technical University in Kosice.

  14. Environmental Restoration Project - Systems Engineering Management Plan

    International Nuclear Information System (INIS)

    Anderson, T.D.

    1998-06-01

    This Environmental Restoration (ER) Project Systems Engineering Management Plan (SEMP) describes relevant Environmental Restoration Contractor (ERC) management processes and shows how they implement systems engineering. The objective of this SEMP is to explain and demonstrate how systems engineering is being approached and implemented in the ER Project. The application of systems engineering appropriate to the general nature and scope of the project is summarized in Section 2.0. The basic ER Project management approach is described in Section 3.0. The interrelation and integration of project practices and systems engineering are outlined in Section 4.0. Integration with sitewide systems engineering under the Project Hanford Management Contract is described in Section 5.0

  15. Information technologies in environmental engineering. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Athanasiadis, Ioannis N.; Rizzoli, Andrea E. [Istituto dalle Molle di Studi sull' Intelligenza Artificiale (IDSIA), Manno (Switzerland); Mitkas, Pericles A. [Aristotle Univ. of Thessaloniki (Greece); Marx Gomez, Jorge (eds.) [Oldenburg Univ. (Germany). Abt. Wirtschaftsinformatik

    2009-07-01

    Information technologies have evolved to an enabling science for natural resource management and conservation, environmental engineering, scientific simulation and integrated assessment studies. Computing plays a significant role in every day practices of environmental engineers, natural scientists, economists, and social scientists. The complexity of natural phenomena requires interdisciplinary approaches, where computing science offers the infrastructure for environmental data collection and management, scientific simulations, decision support documentation and reporting. Ecology, environmental engineering and natural resource management comprise an excellent real-world testbed for IT system demonstration, while raising new challenges for computer science. Complexity, uncertainty and scaling issues of natural systems form a demanding application domain for sensor networks and earth observation systems; modelling, simulation and scientific workflows, data management and reporting, decision support and intelligent systems, distributed computing environments, geographical information systems, heterogeneous systems integration, software engineering, accounting systems and control systems. This books offers a collection of papers presented at the 4th International Symposium on Environmental Engineering, held in May 2009, in Thessaloniki, Greece. Recent success stories in ecoinformatics, promising ideas and new challenges are discussed among computer scientists, environmental engineers, economists and social scientists, demonstrating new paradigms for problem solving and decision making. (orig.)

  16. Yearbook of environmental and engineering law 1990

    International Nuclear Information System (INIS)

    Marburger, P.

    1990-01-01

    The yearbook 1990 again contains individual contributions on German, foreign, and international environmental and engineering law. Beginning with this volume, there will always be a detailed report on previous year developments in environmental and engineering law in order to master the continuously increasing legal material. Some contributions - there are others - deal with the following subjects: Legislative need to act in matters of genetic engineering; ethics commissions and constitutional law; nature's own rights; legal protection of local government against brown coal plans; mining laws; sports and air-traffic noise; questions of nuclear waste management; removal of long-standing multi-party liability in environmental law; waste and restoration of abandoned industrial sites; technological development and liability insurance; problems of legislation coming into effect in pollution abatement procedures; Dutch air pollution abatement fund; environmental absolute liability in Austria; EC environmental legislation and solo actions by individual member states. (HSCH) [de

  17. WLB manual of environmental engineering 1994

    International Nuclear Information System (INIS)

    Schmitz, H.J.

    1993-01-01

    The manual contains addresses of the German environmental authorities, from both the old and new counties; associations and organisations in environmental protection plants, equipment, operations and services according the product groups; major supplier directory for environmented engineering and services. (orig./EF) [de

  18. Environmental effects of engineered nanomaterials

    DEFF Research Database (Denmark)

    Lützhøft, Hans-Christian Holten; Hartmann, Nanna B.; Brinch, Anna

    This report presents ecotoxicological data and Predicted No-Effect Concentrations (PNECs) for nine selected nanomaterials which are considered to be environmentally relevant due to high usage or how they are used. These data will together with data from other reports/projects be used in an overall...... assessment of the environmental risk of nanomaterials in Denmark. The nine investigated nanomaterials are: Titanium Dioxide, Zinc Oxide, Silver, Carbon Nanotubes, Copper Oxide, Nano Zero Valent Iron, Cerium Dioxide, Quantum Dots and Carbon Black. To support the assessment of the data found in the peer...

  19. Fundamentals of environmental engineering. 2. rev. ed.

    International Nuclear Information System (INIS)

    Bank, M.

    1994-01-01

    'Fundamentals of Environmental Engineering' contains the technical and legal bases for the force environmental areas water supply and waste water disposal, clean air, waste avoidance and waste disposal, as well as noise protection in compact form. Particular scope was allowed for the description of the linkages between the individual environmental areas - for instance, waste combustion and clean air, waste deposition at landfills and treatment of leachate, residual products from successful water and air pollution control measures. For all those who have to familiarize themselves with the complex subject of 'environmental engineering' while in training or during continuing education this book offers a broad approach to the essential general, technical and legal bases. (orig.) [de

  20. Bayesian statistics in environmental engineering planning

    Energy Technology Data Exchange (ETDEWEB)

    Englehardt, J.D.; Simon, T.W.

    1999-07-01

    Today's engineer must be able to quantify both uncertainty due to information limitations, and the variability of natural processes, in order to determine risk. Nowhere is this emphasis on risk assessment more evident than in environmental engineering. The use of Bayesian inference for the rigorous assessment of risk based on available information is reviewed in this paper. Several example environmental engineering planning applications are presented: (1) assessment of losses involving the evaluation of proposed revisions to the South Florida Building Code after Hurricane Andrew; (2) development of a model to predict oil spill consequences due to proposed changes in the oil transportation network in the Gulf of Mexico; (3) studies of ambient concentrations of perchloroethylene surrounding dry cleaners and of tire particulates in residential areas near roadways in Miami, FL; (4) risk assessment from contaminated soils at a cleanup of an old transformer dump site.

  1. 78 FR 50052 - Chief of Engineers Environmental Advisory Board; Meeting

    Science.gov (United States)

    2013-08-16

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Chief of Engineers Environmental... Agenda: The Board will advise the Chief of Engineers on environmental policy, identification and... Engineers to receive the views of his Environmental Advisory Board. However, any member of the public...

  2. 76 FR 81485 - Chief of Engineers Environmental Advisory Board; Meeting

    Science.gov (United States)

    2011-12-28

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Chief of Engineers Environmental... Engineers Environmental Advisory Board (EAB). Date: January 19, 2012. Time: 9 a.m. through 12 p.m. Location... (202) 512-6000. Agenda: The Board will advise the Chief of Engineers on environmental policy...

  3. Applied statistics for civil and environmental engineers

    CERN Document Server

    Kottegoda, N T

    2009-01-01

    Civil and environmental engineers need an understanding of mathematical statistics and probability theory to deal with the variability that affects engineers'' structures, soil pressures, river flows and the like. Students, too, need to get to grips with these rather difficult concepts.This book, written by engineers for engineers, tackles the subject in a clear, up-to-date manner using a process-orientated approach. It introduces the subjects of mathematical statistics and probability theory, and then addresses model estimation and testing, regression and multivariate methods, analysis of extreme events, simulation techniques, risk and reliability, and economic decision making.325 examples and case studies from European and American practice are included and each chapter features realistic problems to be solved.For the second edition new sections have been added on Monte Carlo Markov chain modeling with details of practical Gibbs sampling, sensitivity analysis and aleatory and epistemic uncertainties, and co...

  4. Effect of Environmental Actions on Engineering Constructions

    Directory of Open Access Journals (Sweden)

    Vičan Josef

    2017-01-01

    Full Text Available Durability is a very important parameter for design of the engineering constructions because of influence due to degradation processes in the form of structural steel and reinforcement corrosion caused by the environmental actions within structure lifetime. Those degradation processes are affecting the cross-sectional and structural member resistance and deformation parameters of structure. The paper is focused on the study of the corrosion characteristics of the steel bearing structures of engineering constructions to know corrosion effects on the structural steel and to develop the methodology of design for durability.

  5. Environmental Protection Versus Foundry Engineering Practice

    Directory of Open Access Journals (Sweden)

    Maj M.

    2017-06-01

    Full Text Available • Theory and practice of environmental protection in the case of foundries in Europe and Asia • Experience resulting from the cooperation with the foundries in a few European countries, China and India • Phenomena and factors affecting the pollution of the natural environment and the implementation of measures aiming at the environmental protection. Every specialist dealing with foundry processes and their impact on environmental pollution must have encountered in their professional careers numerous situations in which the theory of environmental protection confronts the stark reality. The discrepancy between theory and practice can particularly be noticed in foundry engineering in developing countries where the contrasts between different countries and casting plants are extremely striking. The comparison of working conditions in European and Asian foundries provides a vast scope for further observations and analyses. Environmental protection seems not only a concern of manufacturers of castings, but also of their customers whose opinion exerts a significant influence on both the acceptability of working conditions and on the approach to environmental pollution adopted in metal casting industry. The article presents a number of examples of various outlooks on environmental issues in foundries manufacturing a wide range of cast steel and cast iron castings, where different technologies and production processes are applied.

  6. 75 FR 63449 - Chief of Engineers Environmental Advisory Board

    Science.gov (United States)

    2010-10-15

    ... DEPARTMENT OF DEFENSE Department of the Army; Corps of Engineers Chief of Engineers Environmental Advisory Board AGENCY: Department of the Army, U.S. Army Corps of Engineers DoD. ACTION: Notice of open... advises the Chief of Engineers by providing expert and independent advice on environmental issues facing...

  7. Enhancing environmental engineering education in Europe

    Science.gov (United States)

    Caporali, Enrica; Tuneski, Atanasko

    2013-04-01

    In the frame of knowledge triangle: education-innovation-research, the environmental engineering higher education is here discussed with reference to the TEMPUS-Trans European Mobility Programme for University Studies promoted by the European Commission. Among the focused aspects of TEMPUS are curricula harmonization and lifelong learning programme development in higher education. Two are the curricula, since the first TEMPUS project, coordinated in the period 2005-2008 by University of Firenze in cooperation with colleagues of the Ss Cyril and Methodius University, Skopje. The second three years TEMPUS Joint Project denominated DEREL-Development of Environment and Resources Engineering Learning, is active since October 2010. To the consortium activities participate 4 EU Universities (from Italy, Greece, Germany and Austria), 7 Partner Countries (PC) Universities (from FYR of Macedonia, Serbia and Albania), and 1 PC Ministry, 4 PC National Agencies, 1 PC non governmental organization and 1 PC enterprise. The same 4 EU Universities and the same Macedonian Institutions participated at the first TEMPUS JEP entitled DEREC-Development of Environmental and Resources Engineering Curriculum. Both the first and second cycle curriculum, developed through the co-operation, exchange of know-how and expertise between partners, are based on the European Credit Transfer System and are in accordance with the Bologna Process. Within DEREC a new three-years first cycle curriculum in Environmental and Resources Engineering was opened at the University Ss Cyril and Methodius, Skopje, and the necessary conditions for offering a Joint Degree Title, on the basis of an agreement between the Ss. Cyril and Methodius University and the University of Firenze, were fulfilled. The running DEREL project, as a continuation of DEREC, is aimed to introduce a new, up-to-date, postgraduate second cycle curriculum in Environment and Resources Engineering at the Ss Cyril and Methodius University in

  8. Environmental restoration value engineering guidance document

    International Nuclear Information System (INIS)

    1995-07-01

    This document provides guidance on Value Engineering (VE). VE is an organized team effort led by a person trained in the methodology to analyze the functions of projects, systems, equipment, facilities, services, and processes for achieving the essential functions at the lowest life cycle cost while maintaining required performance, reliability, availability, quality, and safety. VE has proven to be a superior tool to improve up-front project planning, cut costs, and create a better value for each dollar spent. This document forms the basis for the Environmental Restoration VE Program, describes the VE process, and provides recommendations on when it can be most useful on ER projects

  9. Near-Surface Engineered Environmental Barrier Integrity

    International Nuclear Information System (INIS)

    Piet, S.J.; Breckenridge, R.P.

    2002-01-01

    The INEEL Environmental Systems Research and Analysis (ESRA) program has launched a new R and D project on Near-Surface Engineered Environmental Barrier Integrity to increase knowledge and capabilities for using engineering and ecological components to improve the integrity of near-surface barriers used to confine contaminants from the public and the environment. The knowledge gained and the capabilities built will help verify the adequacy of past remedial decisions and enable improved solutions for future cleanup decisions. The research is planned to (a) improve the knowledge of degradation mechanisms (weathering, biological, geological, chemical, radiological, and catastrophic) in times shorter than service life, (b) improve modeling of barrier degradation dynamics, (c) develop sensor systems to identify degradation prior to failure, and (d) provide a better basis for developing and testing of new barrier systems to increase reliability and reduce the risk of failure. Our project combine s selected exploratory studies (benchtop and field scale), coupled effects accelerated aging testing and the meso-scale, testing of new monitoring concepts, and modeling of dynamic systems. The performance of evapo-transpiration, capillary, and grout-based barriers will be examined

  10. Diesel engines: environmental impact and control.

    Science.gov (United States)

    Lloyd, A C; Cackette, T A

    2001-06-01

    The diesel engine is the most efficient prime mover commonly available today. Diesel engines move a large portion of the world's goods, power much of the world's equipment, and generate electricity more economically than any other device in their size range. But the diesel is one of the largest contributors to environmental pollution problems worldwide, and will remain so, with large increases expected in vehicle population and vehicle miles traveled (VMT) causing ever-increasing global emissions. Diesel emissions contribute to the development of cancer; cardiovascular and respiratory health effects; pollution of air, water, and soil; soiling; reductions in visibility; and global climate change. Where instituted, control programs have been effective in reducing diesel fleet emissions. Fuel changes, such as reduced sulfur and aromatics content, have resulted in immediate improvements across the entire diesel on- and off-road fleet, and promise more improvements with future control. In the United States, for example, 49-state (non-California) off-road diesel fuel sulfur content is 10 times higher than that of national on-road diesel fuel. Significantly reducing this sulfur content would reduce secondary particulate matter (PM) formation and allow the use of control technologies that have proven effective in the on-road arena. The use of essentially zero-sulfur fuels, such as natural gas, in heavy-duty applications is also expected to continue. Technology changes, such as engine modifications, exhaust gas recirculation, and catalytic aftertreatment, take longer to fully implement, due to slow fleet turnover. However, they eventually result in significant emission reductions and will be continued on an ever-widening basis in the United States and worldwide. New technologies, such as hybrids and fuel cells, show significant promise in reducing emissions from sources currently dominated by diesel use. Lastly, the turnover of trucks and especially off-road equipment is

  11. Environmental and waste disposal options in nuclear engineering curricula

    International Nuclear Information System (INIS)

    Elleman, T.S.; Gilligan, J.G.

    1991-01-01

    The strong national emphasis on waste and environmental issues has prompted increasing interest among nuclear engineering students in study options that will prepare them for careers in these areas. Student interest appears to focus principally on health physics, radioactive waste disposal, and environmental interactions with radionuclides. One motivation for this interest appears to be the growing national programs in environmental restoration and waste remediation that have produced fellowship support for nuclear engineering students as well as employment opportunities. Also, the recent National Academy of sciences study on nuclear engineering education specifically emphasized the importance of expanding nuclear engineering curricula and research programs to include a greater emphasis on radioactive waste and environmental issues. The North Carolina State University (NCSU) Department of Nuclear Engineering is attempting to respond to these needs through the development of course options that will allow students to acquire background in environmental subjects as a complement to the traditional nuclear engineering education

  12. Energy and environmental challenges to chemical engineers

    International Nuclear Information System (INIS)

    McHenry, K.W.

    1991-01-01

    The National Research Council's report, Frontiers in Chemical Engineering, was written four years ago. Three high-priority research areas concerned with energy and the environment were identified in the report: in situ processing, liquid fuels for the future, and responsible management of hazardous wastes. As outlined in the recently released National Energy Strategy, in situ processing is viewed by the Department of Energy (DOE) primarily through its use in enhanced oil recovery, and some research is still funded. Industry, driven by the economics of low oil prices, is doing little research on in situ processing but much more on reservoir characterization, a prerequisite to processing. Research on liquid fuels for the future is driven more by environmental concerns now than by energy security concerns. It appears to be wise policy for the future to try to solve the alternative fuel problem as quickly and simply as possible. Otherwise, the nation will find itself with a costly and complex fuel and vehicle system that may have to be changed again in a generation. For the interim, we should look closely at reformulated gasoline followed by compressed natural gas, if necessary. In the long run, vehicle systems based on electricity seem most promising for the middle of the next century. To deliver this technology we need to capitalize on three new high-priority research areas: batteries, fuel cells, and nuclear power. For chemical engineers, future challenges of a different sort will be added to the technical challenges, among them are explaining to a skeptical public the wisdom of proceeding to design the interim system of alternative fuel(s) and to move expeditiously to a final solution

  13. Predicting on-site environmental impacts of municipal engineering works

    International Nuclear Information System (INIS)

    Gangolells, Marta; Casals, Miquel; Forcada, Núria; Macarulla, Marcel

    2014-01-01

    The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling municipal engineering projects. In order to ensure the objectivity of the assessment process, direct and indirect indicators were always based on quantitative data from the municipal engineering project documents. Finally, two case studies were analysed and found to illustrate the practical use of the proposed model. The model highlights the significant environmental impacts of a particular municipal engineering project prior to the construction stage. Consequently, preventive actions can be planned and implemented during on-site activities. The results of the model also allow a comparison of proposed municipal engineering projects and alternatives with respect to the overall on-site environmental impact and the absolute importance of a particular environmental aspect. These findings are useful within the framework of the environmental impact assessment process, as they help to improve the identification and evaluation of on-site environmental aspects of municipal engineering works. The findings may also be of use to construction companies that are willing to implement an environmental management system or simply wish to improve on-site environmental performance in municipal engineering projects. -- Highlights: • We present a model to predict the environmental impacts of municipal engineering works. • It highlights significant on-site environmental impacts prior to the construction stage. • Findings are useful within the environmental impact assessment process. • They also

  14. Using Notable Women in Environmental Engineering to Dispel Misperceptions of Engineers

    Science.gov (United States)

    Hoh, Yin Kiong

    2009-01-01

    This paper describes an activity the author has carried out with 72 high school science teachers to enable them to overcome their stereotypical perceptions of engineers. The activity introduced them to notable women in environmental engineering, and raised their awareness of these female engineers' contributions to engineering and society. The…

  15. Environmental Engineering Education: Academia and an Evolving Profession.

    Science.gov (United States)

    Patterson, James W.

    1980-01-01

    Summarized are some of the concepts, historical precedents, and pertinent data which explain the existing structure of environmental engineering education in the U.S. Identified are the main issues which must be considered in planning the future directions of academia in educating the environmental engineer. (Author/SMB)

  16. Environmental implications and applications of engineered ...

    Science.gov (United States)

    This review focus on environmental implications and applications of engineered magnetite (Fe3O4) nanoparticles (MNPs) as a single phase or a component of a hybrid nanocomposite that take advantages of their superparamagnetism and high surface area. MNPs are synthesized via co-precipitation, thermal decomposition, hydrothermal process, emulsion, and microbial process. Aggregation/sedimentation and transport of MNPs depend on surface charge of MNPs and geochemical parameters such as pH, ionic strength, and organic matter. MNPs generally have low toxicity to humans and ecosystem. MNPs are used for making excellent anode electrode materials in lithium-ion battery, for constructing biosensors, and for catalyzing a variety of chemical reactions. MNPs are used for air cleanup and carbon sequestration. MNP nanocomposites are made as antimicrobial agent for water disinfection and flocculants for water treatment. Conjugated MNPs are widely used for adsorptive/separative removal of organics, dye, oil, arsenic, Cr(VI), heavy metals, radionuclides, and rare earth elements. MNPs can degrade organic/inorganic contaminants via chemical reduction or oxidation in water, sediment, and soil. Future studies should further explore mechanisms of MNP interactions with other nanomaterials and contaminants, economic and green approaches of MNP synthesis, and field scale demonstration of MNP utilization. Submit to Journal of Hazardous Materials.

  17. Environmental engineering education: examples of accreditation and quality assurance

    Science.gov (United States)

    Caporali, E.; Catelani, M.; Manfrida, G.; Valdiserri, J.

    2013-12-01

    Environmental engineers respond to the challenges posed by a growing population, intensifying land-use pressures, natural resources exploitation as well as rapidly evolving technology. The environmental engineer must develop technically sound solutions within the framework of maintaining or improving environmental quality, complying with public policy, and optimizing the utilization of resources. The engineer provides system and component design, serves as a technical advisor in policy making and legal deliberations, develops management schemes for resources, and provides technical evaluations of systems. Through the current work of environmental engineers, individuals and businesses are able to understand how to coordinate society's interaction with the environment. There will always be a need for engineers who are able to integrate the latest technologies into systems to respond to the needs for food and energy while protecting natural resources. In general, the environment-related challenges and problems need to be faced at global level, leading to the globalization of the engineering profession which requires not only the capacity to communicate in a common technical language, but also the assurance of an adequate and common level of technical competences, knowledge and understanding. In this framework, the Europe-based EUR ACE (European Accreditation of Engineering Programmes) system, currently operated by ENAEE - European Network for Accreditation of Engineering Education can represent the proper framework and accreditation system in order to provide a set of measures to assess the quality of engineering degree programmes in Europe and abroad. The application of the accreditation model EUR-ACE, and of the National Italian Degree Courses Accreditation System, promoted by the Italian National Agency for the Evaluation of Universities and Research Institutes (ANVUR), to the Environmental Engineering Degree Courses at the University of Firenze is presented. In

  18. Research report 1987-1989: Environmental Quality Laboratory and Environmental Engineering Science, W. M. Keck Laboratories

    OpenAIRE

    Brooks, Norman H.

    1990-01-01

    This research biennial report for 1987-89 covers the activities of both the Environmental Engineering Science program and the Environmental Quality Laboratory for the period October 1987-November 1989. Environmental Engineering Science is the degree-granting academic program housed in the Keck Laboratories, with associated research projects. The Environmental Quality Laboratory is a research center focusing on large scale problems of environmental quality and natural resources. All the facult...

  19. Sensors for everyday life environmental and food engineering

    CERN Document Server

    Postolache, Octavian; Jayasundera, Krishanthi; Swain, Akshya

    2017-01-01

    This book offers an up-to-date overview of the concepts, modeling, technical and technological details and practical applications of different types of sensors, and discusses the trends of next generation of sensors and systems for environmental and food engineering. This book is aimed at researchers, graduate students, academics and industry professionals working in the field of environmental and food engineering, environmental monitoring, precision agriculture and food quality control.

  20. Developments in environmental and engineering law in 1990

    International Nuclear Information System (INIS)

    Brandner, T.

    1991-01-01

    The detailed and clear compilation for the period 1.1.1990-31.1.1991 covers the following topics: Environmental and engineering law in the German unification process; superordinate developments in the EG and in Germany, in particular: Draft Federal Environmental Code, Civil Environmental Liability Act, EIA, German Federal Environmental Foundation; technological safety; climate protection - international agreements, EC law, developments in Germany; air and noise pollution control law; atomic and radiation protection law - point of departure, legislation, individual questions: Federal supervision, nuclear disposal and recycling. Moreover: Environmental concerns in regional planning; the law of nature conservation, water protection, waste management, hazardous materials, genetic engineering and soil protection. (HSCH) [de

  1. Environmental education in Saudi general environment system - an engineering perspective

    International Nuclear Information System (INIS)

    Abdulrahman Salih Hariri

    2006-01-01

    The Saudi Cabinet of Ministers approved the Saudi General Environment System (SGES) in 2001. This approval is considered a step forward towards preserving the environment in Saudi Arabia. One of the targets of this system is to make environmental planning as an un-replaceable part of every comprehensive development planning in all industrial, agricultural, and architectural sectors. Achieving such a target requires a specialized labor force. Therefore, College of Engineering should act positively and actively in disseminating environmental awareness among engineers since they play a major rule in development projects. A degree in environmental engineering is a must at present, which is not available yet at any university in Saudi Arabia. Details of a B. Sc degree in environmental engineering offered by two universities in USA, are discussed. The syllabus of a degree in environment engineering adapted for the Saudi environment and culture is outlined

  2. Environmental engineering education at Ghent University, Flanders (Belgium).

    Science.gov (United States)

    Demeestere, K; Dewulf, J; Janssen, C; Van Langenhove, H

    2004-01-01

    Since the 1980s, environmental engineering education has been a rapidly growing discipline in many universities. This paper discusses the history, the current status and the near future of environmental engineering education at Ghent University. This university, with about 50% of the Flemish university environmental engineering students, can be considered as representative for the situation in Flanders, Belgium. In contrast to many other universities, environmental engineering education at Ghent University does not have its historical roots in civil engineering, but has been developed from the curricula organized by the former Faculty of Agricultural Sciences. As part of a reorganisation of the education and research activities at this faculty, a curriculum leading to the degree of "bio-engineer in environmental technology" was established in 1991. This curriculum covers a 5-year study and is constructed around 8 main components. Exchange of students with other European universities, e.g. within the Socrates framework, has become a prominent aspect of student life and education. This paper also briefly describes the employment opportunities of graduated bio-engineers in environmental technology. Finally, the current implementation of the bachelor's-master's structure, leading to a "master of science in environmental technology" degree is summarized.

  3. EEE (environmental engineering economics) attributes for oil and gas industry

    International Nuclear Information System (INIS)

    Isreb, M.

    2006-01-01

    This paper outlined the basic attributes of environmental engineering economics (EEE) with reference to the oil and gas industry in Australia. The paper was designed as a reference guide for policy-makers, educators, and environmental engineers. Methods of calculating the Pareto Optimum status were discussed, and environmental values and principles were identified. Air quality indicators were outlined. The paper considered multidisciplinary approaches to EEE and sustainable development, as well as the application of statistics and qualitative methods in addressing contemporary issues. The ethical aspects of environmental policies were discussed. Issues related to environmental toxicity and public health were also examined. Various taxation approaches and financial incentives were reviewed. Environmental laws related to the oil and gas industry were outlined. Environmental assessment procedures were presented. It was concluded that environmental regulations within the industry will help to ensure appropriate pollution reductions. 7 refs

  4. Biochemical, Environmental Engineering and Water Treatment

    International Nuclear Information System (INIS)

    Ahmed, A.A.E.; Ibrahem, I.M.

    2004-01-01

    to Environmental Considerations - The environmental impacts of a proposed wastewater treatment facility are as important,t, if not more so, as cost considerations, a few comments regarding applicable environmental considerations that must also be addressed are appropriate. - The environmental evaluations should focus on social, technical, ecological, economic, political, legal, and institutional (STEEPLI) criteria. - Environmental Impact Statement (EIS) prepared for any proposed governmental action that is determined to have a significant impact on the quality of the human environment. - The regulations ensure that the probable environmental effects are identified, that a reasonable number of alternative actions and their environmental impacts are considered, that the environmental information is available for public understanding and scrutiny, and that the public and governmental agencies participate as a part of the decision process. - All pertinent regulations and the inherent participate afforded must be disclosed in the EIS. - National Environmental Policy Act of USA (NEP A ) neither prohibits nor permits any action but requires full disclosure of environmental information and public participation in the decision making process

  5. ADDRESSING ENVIRONMENTAL ENGINEERING CHALLENGES WITH COMPUTATIONAL FLUID DYNAMICS

    Science.gov (United States)

    This paper discusses the status and application of Computational Fluid Dynamics )CFD) models to address environmental engineering challenges for more detailed understanding of air pollutant source emissions, atmospheric dispersion and resulting human exposure. CFD simulations ...

  6. Meet EPA Environmental Engineer Terra Haxton, Ph.D.

    Science.gov (United States)

    EPA Environmental Engineer Terra Haxton, Ph.D., uses computer simulation models to protect drinking water. She investigates approaches to help water utilities be better prepared to respond to contamination incidents in their distribution systems.

  7. Predicting on-site environmental impacts of municipal engineering works

    OpenAIRE

    Gangolells Solanellas, Marta; Casals Casanova, Miquel; Forcada Matheu, Núria; Macarulla Martí, Marcel

    2014-01-01

    The research findings fill a gap in the body of knowledge by presenting an effective way to evaluate the significance of on-site environmental impacts of municipal engineering works prior to the construction stage. First, 42 on-site environmental impacts of municipal engineering works were identified by means of a process-oriented approach. Then, 46 indicators and their corresponding significance limits were determined on the basis of a statistical analysis of 25 new-build and remodelling mun...

  8. A global study of undergraduate environmental engineering programs

    International Nuclear Information System (INIS)

    Abro, Q.M.

    2005-01-01

    Recent analyses of environmental engineering and management (EE and M) field has highlighted its rapidly expanding size and increasingly diverse nature (Hart and Nolan, 1999). The last 30 years have seen growing international recognition that the challenges associated with environmental degradation and sustainable development have important implications for, and connections with, education and research (IUCN, 1970; UNCED, 1992). The concept of environmental education is now widespread in national educational policies, curriculum documents, curriculum development initiatives, and conservation strategies. Reflecting this trend, several universities throughout the world offer a wide range of graduate as well as undergraduate programs in environment. These programs have originated from various academic schools and disciplines (engineering, public policy, business, management, etc) creating considerable diversity of focus, themes emphasized, courses and methods of offerings. The rise of these programs, in part, reflects the growing need for engineers, technologists as well as managers, who are able to understand, contribute to, and manage a wide variety of technology-based programs and organizations. In addition, the large number of environmental engineering research journals, professional associations and international/national conferences point to the rapid growth of this field. This paper will examine the trends in provision, type of program, major curriculum focus of undergraduate environmental engineering and management education and then compare these trends with the emerging trends in the environmental engineering and management research journals of the last decade. (author)

  9. Environmental Engineering Curricula assessment in the global world

    Science.gov (United States)

    Caporali, Enrica; Catelani, Marcantonio; Manfrida, Giampaolo; Valdiserri, Juna

    2014-05-01

    Environmental engineers are technicians with specific expertise on the sustainability of human presence in the environment. Among other global dilemmas, to the environmental engineers it is often demanded to be able in developing systematic, innovative solutions in order to simultaneously meet water and energy needs, to build resilience to natural and technological disasters, to more accurately gauge and manage countries' greenhouse gas emissions. The general objectives of the Environmental Engineers are to establish actions of environmental sustainability as well as to verify progress toward global goals or international commitments. The globalization of challenges and problems to be faced, leads, in general, to the globalization of the engineering profession. In particular, since the environmental issues are without boundaries, and many and different are the involved professions and the competences, the environmental engineer must have a multidisciplinary and interdisciplinary approach to adequately answer to the demand of technical innovative knowledge at global scale. The environmental engineers, more and more, are involved in international projects were the effective collaboration requires not only the capacity to communicate in a common technical language, but also the assurance of an adequate and common level of technical competences, knowledge and understanding. The Europe-based EUR ACE system, currently operated by ENAEE - European Network for Accreditation of Engineering Education, can represent the proper framework and accreditation system in order to provide a set of measures to assess the quality of engineering degree programmes in Europe and abroad. In the global frame of the knowledge triangle: education-innovation-research, the accreditation and quality assurance of engineering curricula in Europe is discussed with reference to the Environmental engineering curricula, of the 1st and 2nd cycle, based on the European Credit Transfer System and in

  10. Going "Green": Environmental Jobs for Scientists and Engineers

    Science.gov (United States)

    Ramey, Alice

    2009-01-01

    Green is often used as a synonym for environmental or ecological, especially as it relates to products and activities aimed at minimizing damage to the planet. Scientists and engineers have long had important roles in the environmental movement. Their expertise is focused on a variety of issues, including increasing energy efficiency, improving…

  11. Environmental Pollution: Sanitary Engineering and Industrial Waste.

    Science.gov (United States)

    1977-07-01

    and closed ecological systems which may prove beneficial to ongoing research and operations for controlling environmental pollution . Corporate Author-Monitoring Agency, Subject, Title and Personal Author are provided. (Author)

  12. Assessing the Environmental Safety of Engineered Nanomaterials

    Science.gov (United States)

    Nanotechnology research in the United States is coordinated under the National Nano-technology Initiative with the goal of fostering development and implementation of nanomaterials and products that incorporate them and assuring that they are environmentally safe. The environmen...

  13. Evaluation of teaching in environmental engineering

    DEFF Research Database (Denmark)

    Mikkelsen, Peter Steen; Larsen, Bo Skjold; Bjerg, Poul Løgstrup

    2000-01-01

    This paper describes the effect of changing course content and teaching methodology for an introductory course in Environmental Processes. Student evaluations were used both to monitor the effect of the changes, as well as to change the course structure and the didactics. The result of the change...

  14. Evaluation of teaching in environmental engineering

    DEFF Research Database (Denmark)

    Mikkelsen, Peter Steen; Larsen, Bo Skjold; Bjerg, Poul Løgstrup

    2000-01-01

    This paper describes the effect of changing course content and teaching methodology for an introductory course in Environmental Processes. Student evaluations were used both to monitor the effect of the changes, as well as to change the course structure and the didactics. The result of the change...... was a better average score at the examination, and higher student satisfaction. The paper illustrates the usefulness of course evaluations in course development.......This paper describes the effect of changing course content and teaching methodology for an introductory course in Environmental Processes. Student evaluations were used both to monitor the effect of the changes, as well as to change the course structure and the didactics. The result of the change...

  15. Health effects engineering: Perspectives for environmental health and environmental engineering studies-domestic biomass combustion as an example

    International Nuclear Information System (INIS)

    Gao Xiang; Yu Qi; Chen Limin

    2007-01-01

    Health effects engineering (HEE) is a newly developed research field, which involves collaboration with environmental scientists, engineering researchers, and toxicologists. By employing the methods of HEE, one can not only confirm which attributes of the project are likely to contribute to certain health effects, but can also get rid of the adverse health effects by engineering technologies. HEE is thought to be particularly important to domestic projects in which there is a lack of environmental assessment. This paper presented the authors' viewpoints of the principles of HEE in the field of the environmental health and engineering studies by using programs of domestic biomass combustion as an example. The authors showed that there are three sub-fields of HEE, which are as follows: engineering behavior, the pollution characteristics, and the health effects. The authors conclude that the principles of HEE compose a helix with the studies in the fields of environmental science, health, and engineering, and give suggestions on how to perform HEE in a practical field

  16. Introducing ethical, social and environmental issues in ICT engineering degrees

    OpenAIRE

    Rafael Miñano; Celia Fernández Aller; Áurea Anguera; Eloy Portillo

    2016-01-01

    This paper describes the experience of introducing ethical, social and environmental issues in undergraduate ICT engineering degrees at the Universidad Politécnica de Madrid. The experience before the Bologna Process was concentrated on developing elective courses related mainly on the field of the International Development Cooperation. The integration of those topics within the current ICT engineering curricula, adapted to the European Higher Education Area framework, has significantly imp...

  17. A tax policy to liberate environmental engineering

    International Nuclear Information System (INIS)

    Kendall, R.C.

    1997-01-01

    Examples are provided of the great gulf between what the design professions are capable of doing and what they are actually doing. Principles of resolutionary design are applied to the problem. The result: changes in tax policy with substantial economic gain in the best interest of all the people. It is recommended that taxation of what one wants to conserve--energy resource use--be substituted over the long term for taxation of what one does not want to minimize--income. It is time for lenders, in the case of dwelling construction, to accept appraisals based on present worth, in turn based on competent life-cycle costing and certified by engineering economic analysis. It is time for the professional societies and the publicly regulated utilities to join forces with the lenders and the appraisers in a matter which is in the best interest of all the people

  18. Idaho National Engineering and Environmental Laboratory Environmental Technologies Proof-of-Concepts. Final report FY-96

    Energy Technology Data Exchange (ETDEWEB)

    Barrie, S.L.; Carpenter, G.S.; Crockett, A.B. [and others

    1997-04-01

    The Idaho National Engineering and Environmental Laboratory Environmental Technologies Proof-of-Concept Project was initiated for the expedited development of new or conceptual technologies in support of groundwater fate, transport, and remediation; buried waste characterization, retrieval, and treatment; waste minimization/pollution prevention; and spent fuel handling and storage. In Fiscal Year 1996, The Idaho National Engineering and Environmental Laboratory proposed 40 development projects and the Department of Energy funded 15. The projects proved the concepts of the various technologies, and all the technologies contribute to successful environmental management.

  19. Idaho National Engineering and Environmental Laboratory Environmental Technologies Proof-of-Concepts. Final report FY-96

    International Nuclear Information System (INIS)

    Barrie, S.L.; Carpenter, G.S.; Crockett, A.B.

    1997-04-01

    The Idaho National Engineering and Environmental Laboratory Environmental Technologies Proof-of-Concept Project was initiated for the expedited development of new or conceptual technologies in support of groundwater fate, transport, and remediation; buried waste characterization, retrieval, and treatment; waste minimization/pollution prevention; and spent fuel handling and storage. In Fiscal Year 1996, The Idaho National Engineering and Environmental Laboratory proposed 40 development projects and the Department of Energy funded 15. The projects proved the concepts of the various technologies, and all the technologies contribute to successful environmental management

  20. Enhancing Engineering Students’ Learning in an Environmental Microbiology Course

    Directory of Open Access Journals (Sweden)

    Zhi Zhou

    2012-08-01

    Full Text Available While environmental engineering students have gained some knowledge of biogeochemical cycles and sewage treatment, most of them haven’t learned microbiology previously and usually have difficulty in learning environmental microbiology because microbiology deals with invisible living microorganisms instead of visible built environment. Many teaching techniques can be used to enhance students’ learning in microbiology courses, such as lectures, animations, videos, small-group discussions, and active learning techniques. All of these techniques have been applied in the engineering class, but the results indicate that these techniques are often inadequate for students. Learning difficulties have to be identified to enhance students’ learning.

  1. Environmental engineering simplifies subterranean locomotion control

    Science.gov (United States)

    Gravish, Nick; Monaenkova, Darya; Goodisman, Michael A. D.; Goldman, Daniel I.

    2013-03-01

    We hypothesize that ants engineer habitats which reduce locomotion control requirements. We studied tunnel construction, and locomotion, in fire ants (Solenopsis invicta, body length L = 0 . 35 +/- 0 . 05). In their daily life, ants forage for food above ground and return resources to the nest. This steady-state tunnel traffic enables high-throughput biomechanics studies of tunnel climbing. In a laboratory experiment we challenged fire ants to climb through 8 cm long glass tunnels (D = 0.1 - 0.9 cm) that separated a nest from an open arena with food and water. During ascending and descending climbs we induced falls by a motion-activated rapid, short, downward translation of the tunnels. Normalized tunnel diameter (D / L) determined the ability of ants to rapidly recover from perturbations. Fall arrest probability was unity for small D / L , and zero for large D / L . The transition from successful to unsuccessful arrest occurred at D / L = 1 . 4 +/- 0 . 3 . Through X-Ray computed tomography study we show that the diameter of ant-excavated tunnels is independent of soil-moisture content (studied from 1-20%) and particle size (50-595 μm diameter), and has a mean value of D / L = 1 . 06 +/- 0 . 23 . Thus fire ants construct tunnels of diameter near the onset of fall instability.

  2. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: NEW CONDENSATOR, INC.--THE CONDENSATOR DIESEL ENGINE RETROFIT CRANKCASE VENTILATION SYSTEM

    Science.gov (United States)

    EPA's Environmental Technology Verification Program has tested New Condensator Inc.'s Condensator Diesel Engine Retrofit Crankcase Ventilation System. Brake specific fuel consumption (BSFC), the ratio of engine fuel consumption to the engine power output, was evaluated for engine...

  3. Infrastructure Operations Technical Baseline Development at the Idaho National Engineering and Environmental Laboratory Using Systems Engineering

    International Nuclear Information System (INIS)

    Caliva, R.M.

    1999-01-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) is a Department of Energy (DOE) national laboratory that has been performing environmental cleanup and stabilization, which was accelerated upon the end of the cold war. In fact, the INEEL currently receives two-thirds of its scope to perform these functions. These activities can only be successful, however, if infrastructure operations are adequate and appropriately tailored. Several of the systems engineers supporting a group called Environmental Management Integration (EMI) were given the charter to develop the technical baseline for all INEEL infrastructure operations. This paper will discuss the systems engineering process developed in order to capture the driving requirements and identify the necessary functions that must exist in order to successfully support environmental cleanup and stabilization

  4. Environmental Testing of the NEXT PM1 Ion Engine

    Science.gov (United States)

    Synder, John S.; Anderson, John R.; VanNoord, Jonathan L.; Soulas, George C.

    2008-01-01

    The NEXT propulsion system is an advanced ion propulsion system presently under development that is oriented towards robotic exploration of the solar system using solar electric power. The Prototype Model engine PM1 was subjected to qualification-level environmental testing to demonstrate compatibility with environments representative of anticipated mission requirements. Random vibration testing, conducted with the thruster mated to the breadboard gimbal, was executed at 10.0 Grms for 2 minutes in each of three axes. Thermal-vacuum testing included a deep cold soak of the engine to temperatures of -168 C and thermal cycling from -120 to 203 C. Although the testing was largely successful, several issues were identified including the fragmentation of potting cement on the discharge and neutralizer cathode heater terminations during vibration which led to abbreviated thermal testing, and generation of particulate contamination from manufacturing processes and engine materials. Thruster performance was nominal throughout the test program, with minor variations in some engine operating parameters likely caused by facility effects. In general, the NEXT PM1 engine and the breadboard gimbal were found to be well-designed against environmental requirements based on the results reported herein. After resolution of the findings from this test program the hardware environmental qualification program can proceed with confidence.

  5. Introducing Ethical, Social and Environmental Issues in ICT Engineering Degrees

    Science.gov (United States)

    Miñano, Rafael; Aller, Celia Fernández; Anguera, Áurea; Portillo, Eloy

    2015-01-01

    This paper describes the experience of introducing ethical, social and environmental issues in undergraduate ICT engineering degrees at the Universidad Politécnica de Madrid. The experience before the Bologna Process was concentrated on developing elective courses related mainly on the field of the International Development Cooperation. The…

  6. ETHICS AND JUSTICE IN ENVIRONMENTAL SCIENCE AND ENGINEERING

    Science.gov (United States)

    Science and engineering are built on trust. C.P. Snow's famous quote, "the only ethical principle which has made science possible is that the truth shall be told all the time" underscores the importance of honesty in science. Environmental scientists must do work that is useful...

  7. Construction Site Environmental Impact in Civil Engineering Education

    Science.gov (United States)

    Teixeira, Jose M. Cardoso

    2005-01-01

    The environmental impact of construction activity has gained increasing importance in the last few years and become a key subject for civil engineering education. A survey of Portuguese higher education institutions shows that concern with this topic is mostly directed at the impact of large construction projects and especially focused on their…

  8. Stationary Engineering, Environmental Control, Refrigeration. Science Manual I.

    Science.gov (United States)

    Steingress, Frederick M.; And Others

    The student materials present lessons about occupations related to environmental control, stationary engineering, and refrigeration. Included are 18 units organized by objective, information, reference, procedure, and assignment. Each lesson involves concrete trade experience where science is applied. Unit titles are: safety and housekeeping,…

  9. Environmental Engineering Unit Operations and Unit Processes Laboratory Manual.

    Science.gov (United States)

    O'Connor, John T., Ed.

    This manual was prepared for the purpose of stimulating the development of effective unit operations and unit processes laboratory courses in environmental engineering. Laboratory activities emphasizing physical operations, biological, and chemical processes are designed for various educational and equipment levels. An introductory section reviews…

  10. Environmental engineer works to eliminate odor in biosolids

    OpenAIRE

    Nystrom, Lynn A.

    2006-01-01

    The county of Los Angeles may not like this distinction, but environmental engineer John Novak says the sludge from this area of California has the worst odor of any he has ever tested. A walk inside his laboratory, sealed-off from other testing facilities on the Virginia Tech campus, produces instant agreement.

  11. Environmental aspects of engineering geological mapping in the United States

    Science.gov (United States)

    Radbruch-Hall, Dorothy H.

    1979-01-01

    Many engineering geological maps at different scales have been prepared for various engineering and environmental purposes in regions of diverse geological conditions in the United States. They include maps of individual geological hazards and maps showing the effect of land development on the environment. An approach to assessing the environmental impact of land development that is used increasingly in the United States is the study of a single area by scientists from several disciplines, including geology. A study of this type has been made for the National Petroleum Reserve in northern Alaska. In the San Francisco Bay area, a technique has been worked out for evaluating the cost of different types of construction and land development in terms of the cost of a number of kinds of earth science factors. ?? 1979 International Association of Engineering Geology.

  12. Strengthening Environmental Engineering Education in Afghanistan through Cooperating Military Academies

    Science.gov (United States)

    Christ, J. A.; Mahbob, M.; Seely, G. E.; Ressler, S. J.

    2007-12-01

    Many developing countries suffer from substandard employment of environmental engineering and science principles, which leads to poor management of natural and cultural resources, increased public health concerns, and limitations on economic investment and growth. Thus, prior to the implementation of well-intentioned programs designed to promote development, methods for sustaining basic needs, which are the focus of most environmental engineering disciplines, must be designed into the social fabric of the developing culture. Education is a promising method for fostering this development across cultures. Recently, the US Air Force Academy (USAFA) partnered with the US Military Academy (USMA) to implement a Civil Engineering Program at the National Military Academy of Afghanistan (NMAA), Kabul, Afghanistan. This work will outline the process followed during course development, deployment, and implementation, paying particular attention to challenges and benefits at each stage in the process. This cooperation may serve as a model for future implementation of science, technology, engineering and mathematics education programs in developing countries. Consistent with US Civil Engineering programs, the NMAA Civil Engineering program introduces students to a broad range of introductory-level civil engineering subjects--environmental, hydraulic, geotechnical, structural, construction, and transportation engineering. Basic environmental engineering and science principles are addressed through the implementation of an introductory environmental engineering course. Course development followed a three-stage process: (1) course development by US faculty at their home institution, (2) imbedding of US Faculty at the NMAA, and (3) implementation of the course within the NMAA Civil Engineering curriculum using adjunct Afghan faculty hired from Kabul University. An existing environmental engineering course taught at USAFA was used as a model for course development. Although this

  13. Environmental Ends and Engineering Means: Becoming Environmental Engineers for the Nation and the World

    Science.gov (United States)

    1991-05-01

    ter. The quality of the public city life depends therefore problems. The problems then become defined more on the quality of such works as aqueducts ...possi- when civil engineers did great things for people-built ble. dams, lit up valleys , and helped people rebuild from a depression. These same...Washington, D.C., 1988. Taft H. Broome,Jr. "The Slippery Ethics of Engineering," Wailgton Po Sunday, December, 1986. Lester R. Brown, Saef theWrld, W

  14. Engineering Education: Environmental and Chemical Engineering or Technology Curricula--A European Perspective

    Science.gov (United States)

    Glavic, Peter; Lukman, Rebeka; Lozano, Rodrigo

    2009-01-01

    Over recent years, universities have been incorporating sustainable development (SD) into their systems, including their curricula. This article analyses the incorporation of SD into the curricula of chemical and environmental engineering or technology bachelor degrees at universities in the European Union (EU) and European Free Trade Association…

  15. The role of karst in engineering and environmental geosciences

    Directory of Open Access Journals (Sweden)

    H. C. Ho

    2011-08-01

    Full Text Available Karst is a unique landform developed by soluble rock. It usually relates to the groundwater drainage system, and provides important water resources. Current researches indicate that karst is closely related to the Earth system and environmental protection, and it can also create potential natural hazards such as sinkhole flooding and land subsidence in urban area. Its relationship with hydrogeology has also been an important factor for studying water pollution and nutrient cycles in engineering geosciences and agricultural geology.

  16. State of radiotracer application at the Division of Environmental Engineering, CDTN, NUCLEBRAS

    International Nuclear Information System (INIS)

    Aun, P.E.; Castro, J.O.N.M. de; Moreira, R.M.; Bandeira, J.V.

    1984-01-01

    The history and working phylosophy of the NUCLEBRAS division of environmental engineering are reported. Some aspects of tracer applications and of the tasks performed by the division of environmental engineering are described. (M.A.C.) [pt

  17. Environmental impact of offshore operation reduced using innovative engineering solutions

    International Nuclear Information System (INIS)

    Ritchie, C.J.; Wensel, E.A.; Edelblum, L.S.; Beal, D.

    1994-01-01

    The North Dauphin Island Tract 73 platform is located in eleven feet (3.4 m) of water and one mile (1.6 km) from shore in Mobile Bay, Alabama. The platform is designed to dehydrate and compress up to 70 MMSCFD (1.98 x 10 6 SM 3 ) from five remote gas production wells. Located near the city of Mobile, Alabama, the surrounding metropolitan and coastal areas has multiple uses including manufacturing, tourism, commercial and sport fishing, and wetlands and wildlife conservation. The multiple and interdependent economic uses of the area required that the platform be designed to minimize any adverse environmental impact. A cost-effective environmental engineering solution was desired at the design phase of the project. A water catchment, containment and disposal system was designed to meet the zero discharge requirement. Pollution from air emissions was reduced by the installation of lean burning engines. A floatover installation process was used to prevent dredging of the bay, thus protecting the bay water quality. An aesthetically concealing paint and lighting scheme was chosen and applied to the entire structure. These cost-effective engineering solutions during the design phase of the project saved time and money over the life of the project. All regulatory permits were obtained in a timely manner, with little or no opposition. The operator of the North Dauphin Island Development won several environmental awards due to the implementation of innovative solutions and their commitment to conservation of the natural environment

  18. Certain aspects of the environmental impact of nuclear power engineering and thermal power engineering

    International Nuclear Information System (INIS)

    Malenchenko, A.F.

    1979-01-01

    A review is made of the both environmental impact and hazard to man resulting from nuclear power engineering comparing with those of thermal power engineering. At present, in addition to such criteria, as physical-chemical characteristic of energy sources, their efficiency and accessibility for exploitation, new requirements were substantiated in relation to safety of their utilization for environment. So, one of essential problems of nuclear power engineering development consists in assessment and prediction of radioecological consequence. The analysis and operating experience of more than 1000 reactor/years with no accidents and harm for pupulation show, that in respect to impact on environment and man nuclear power engineering is much more safe in comparison with energy sources using tradidional fossile fuel

  19. 1996 LMITCO environmental monitoring program report for the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    This report describes the calendar year 1996 environmental surveillance and compliance monitoring activities of the Lockheed Martin Idaho Technologies Company Environmental Monitoring Program performed at the Idaho National Engineering and Environmental Laboratory (INEEL). Results of sampling performed by the Radiological Environmental Surveillance, Site Environmental Surveillance, Drinking Water, Effluent Monitoring, Storm Water Monitoring, Groundwater Monitoring, and Special Request Monitoring Programs are included in this report. The primary purposes of the surveillance and monitoring activities are to evaluate environmental conditions, to provide and interpret data, to verify compliance with applicable regulations or standards, and to ensure protection of human health and the environment. This report compares 1996 data with program-specific regulatory guidelines and past data to evaluate trends.

  20. 75 FR 22754 - Federal Advisory Committee; Chief of Engineers Environmental Advisory Board; Charter Renewal

    Science.gov (United States)

    2010-04-30

    ... of Defense gives notice that it is renewing the charter for the Chief of Engineers Environmental... environmental issues facing the U.S. Army Corps of Engineers. The Secretary of the Army may act upon the Board's... may submit written statements to the Chief of Engineers Environmental Advisory Board's membership...

  1. Increasing Capacity for Environmental Engineering in Salta, Argentina

    Science.gov (United States)

    Rajal, Verónica B.; Cid, Alicia G.; Cruz, Mercedes C.; Poma, Hugo R.; Cacciabue, Dolores Gutierrez; Romano, Neli; Moraga, Norma B.; Last, Jerold A.

    2012-01-01

    Background The Fogarty International Center (FIC) of the United States National Institutes of Health includes the International Training and Research in Environmental and Occupational Health (ITREOH) Program. The “International Training Program in Environmental Toxicology and Public Health” Center, funded in 2002 is based at the University of California, Davis, and is part of the ITREOH group of Centers. It has major efforts focused at the public universities in Montevideo, Uruguay, and Salta, Argentina. Results Training and research efforts in Salta begun in 2005 in the College of Engineering. A donated used real-time PCR machine was the starting point and the initial FIC support was instrumental to face other problems including physical space, research projects and grants, trainees, training, networking, and distractions/opportunities in order to develop local capacities in Environmental Engineering using modern methodology. After six years of successful work, the Salta center has become a reference Center in the field, and is still growing and consolidating. Conclusions This program has had a significant impact locally and regionally. The model used in Argentina could be easily adapted to other fields or types of projects in Argentina and in other developing countries. PMID:22467330

  2. Increasing capacity for environmental engineering in Salta, Argentina.

    Science.gov (United States)

    Rajal, Verónica B; Cid, Alicia G; Cruz, Mercedes C; Poma, Hugo R; Cacciabue, Dolores Gutierrez; Romano, Neli; Moraga, Norma B; Last, Jerold A

    2013-01-01

    The Fogarty International Center (FIC) of the United States National Institutes of Health includes the International Training and Research in Environmental and Occupational Health (ITREOH) Program. The "International Training Program in Environmental Toxicology and Public Health" Center, funded in 2002 is based at the University of California, Davis, and is part of the ITREOH group of Centers. It has major efforts focused at the public universities in Montevideo, Uruguay, and Salta, Argentina. Training and research efforts in Salta begun in 2005 in the College of Engineering. A donated used real-time PCR machine was the starting point and the initial FIC support was instrumental to face other problems including physical space, research projects and grants, trainees, training, networking, and distractions/opportunities in order to develop local capacities in Environmental Engineering using modern methodology. After 6 years of successful work, the Salta center has become a reference Center in the field, and is still growing and consolidating. This program has had a significant impact locally and regionally. The model used in Argentina could be easily adapted to other fields or types of projects in Argentina and in other developing countries. Copyright © 2012 Wiley Periodicals, Inc.

  3. 1997 LMITCO Environmental Monitoring Program Report for the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, B.; Street, L.; Wilhelmsen, R.

    1998-09-01

    This report describes the calendar year 1997 environmental surveillance and compliance monitoring activities of the Lockheed Martin Idaho Technologies Company Environmental Monitoring Program performed at the Idaho National Engineering and Environmental Laboratory. This report includes results of sampling performed by the Radiological Environmental Surveillance, Site Environmental Surveillance, Drinking Water, Effluent Monitoring, Storm Water Monitoring, Groundwater Monitoring, and Special Request Monitoring Programs and compares 1997 data with program-specific regulatory guidelines and past data to evaluate trends. The primary purposes of the surveillance and monitoring activities are to evaluate environmental conditions, to provide and interpret data, to verify compliance with applicable regulations or standard, and to ensure protection of human health and the environment. Surveillance of environmental media did not identify any previously unknown environmental problems or trends indicating a loss of control or unplanned releases from facility operations. With the exception of one nitrogen sample in the disposal pond effluent stream and iron and total coliform bacteria in groundwater downgradient from one disposal pond, compliance with permits and applicable regulations was achieved. Data collected by the Environmental Monitoring Program demonstrate that public health and the environment were protected.

  4. Modelling of Electrokinetic Processes in Civil and Environmental Engineering Applications

    DEFF Research Database (Denmark)

    Paz-Garcia, Juan Manuel; Johannesson, Björn; Ottosen, Lisbeth M.

    2011-01-01

    A mathematical model for the electrokinetic phenomena is described. Numerical simulations of different applications of electrokinetic techniques to the fields of civil and environmental engineering are included, showing the versatility and consistency of the model. The electrokinetics phenomena c...... to hinder the acid penetration; and an acid-enhanced electrokinetic soil remediation process, where the basic front is neutralized in order to avoid the precipitation of hydroxides of the target heavy metal....... the porous materials undergoes an electroosmotic flow subject to externally applied electric fields. Electroosmotic transport makes electrokinetic techniques suitable for the mobilization of non-charged particles within the pore structure, such as the organic contaminants in soil. Chemical equilibrium...

  5. Idaho National Engineering Laboratory Consolidated Transportation Facility. Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    The Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0822, addressing environmental impacts that could result from siting, construction, and operation of a consolidated transportation facility at the Idaho National Engineering Laboratory (INEL) near Idaho Falls, Idaho. The DOE proposes to construct and operate a new transportation facility at the Central Facilities Area (CFA) at the INEL. The proposed facility would replace outdated facilities and consolidate in one location operations that are conducted at six different locations at the CFA. The proposed facility would be used for vehicle and equipment maintenance and repair, administrative support, bus parking, and bus driver accommodation. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act (NEPA) of 1969, as amended. Therefore, the preparation of an environmental impact statement (EIS) is not required and the Department is issuing this finding of no significant impact.

  6. Dynamic Probabilistic Modeling of Environmental Emissions of Engineered Nanomaterials.

    Science.gov (United States)

    Sun, Tian Yin; Bornhöft, Nikolaus A; Hungerbühler, Konrad; Nowack, Bernd

    2016-05-03

    The need for an environmental risk assessment for engineered nanomaterials (ENM) necessitates the knowledge about their environmental concentrations. Despite significant advances in analytical methods, it is still not possible to measure the concentrations of ENM in natural systems. Material flow and environmental fate models have been used to provide predicted environmental concentrations. However, almost all current models are static and consider neither the rapid development of ENM production nor the fact that many ENM are entering an in-use stock and are released with a lag phase. Here we use dynamic probabilistic material flow modeling to predict the flows of four ENM (nano-TiO2, nano-ZnO, nano-Ag and CNT) to the environment and to quantify their amounts in (temporary) sinks such as the in-use stock and ("final") environmental sinks such as soil and sediment. Caused by the increase in production, the concentrations of all ENM in all compartments are increasing. Nano-TiO2 had far higher concentrations than the other three ENM. Sediment showed in our worst-case scenario concentrations ranging from 6.7 μg/kg (CNT) to about 40 000 μg/kg (nano-TiO2). In most cases the concentrations in waste incineration residues are at the "mg/kg" level. The flows to the environment that we provide will constitute the most accurate and reliable input of masses for environmental fate models which are using process-based descriptions of the fate and behavior of ENM in natural systems and rely on accurate mass input parameters.

  7. 1998 Environmental Monitoring Program Report for the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    L. V. Street

    1999-09-01

    This report describes the calendar year 1998 compliance monitoring and environmental surveillance activities of the Lockheed Martin Idaho Technologies Company Environmental Monitoring Program performed at the Idaho National Engineering and Environmental Laboratory. This report includes results of sampling performed by the Drinking Water, Effluent, Storm Water, Groundwater Monitoring, and Environmental Surveillance Programs. This report compares the 1998 results to program-specific regulatory guidelines and past data to evaluate trends. The primary purposes of the monitoring and surveillance activities are to evaluate environmental conditions, to provide and interpret data, to verify compliance with applicable regulations or standards, and to ensure protection of public health and the environment. Surveillance of environmental media did not identify any previously unknown environmental problems or trends, which would indicate a loss of control or unplanned releases from facility operations. The INEEL complied with permits and applicable regulations, with the exception of nitrogen samples in a disposal pond effluent stream and iron and total coliform bacteria in groundwater downgradient from one disposal pond. Data collected by the Environmental Monitoring Program demonstrate that the public health and environment were protected.

  8. Idaho National Engineering and Environmental Laboratory site environmental report for calendar year 1997

    International Nuclear Information System (INIS)

    Evans, R.B.; Brooks, R.W.; Roush, D.; Martin, D.B.; Lantz, B.S.

    1998-08-01

    To verify that exposures resulting from operations at Department of Energy (DOE) nuclear facilities remain very small, each site at which nuclear activities are conducted operates an environmental surveillance program to monitor the air, water and any other pathway whereby radionuclides from operations might conceivably reach workers and members of the public. Environmental surveillance and monitoring results are reported annually to the DOE-Headquarters. This report presents a compilation of data collected in 1997 for the routine environmental surveillance programs conducted on and around the Idaho National Engineering and Environmental Laboratory (INEEL). The results of the various monitoring programs for 1997 indicated that radioactivity from the INEEL operations could generally not be distinguished from worldwide fallout and natural radioactivity in the region surrounding the INEEL. Although some radioactive materials were discharged during INEEL operations, concentrations in the offsite environment and doses to the surrounding population were far less than state of Idaho and federal health protection guidelines

  9. Idaho National Engineering and Environmental Laboratory site environmental report for calendar year 1997

    Energy Technology Data Exchange (ETDEWEB)

    Evans, R.B.; Brooks, R.W.; Roush, D.; Martin, D.B. [Environmental Science and Research Foundation, Idaho Falls, ID (United States); Lantz, B.S. [Dept. of Energy, Idaho Falls, ID (United States). Idaho Operations Office

    1998-08-01

    To verify that exposures resulting from operations at Department of Energy (DOE) nuclear facilities remain very small, each site at which nuclear activities are conducted operates an environmental surveillance program to monitor the air, water and any other pathway whereby radionuclides from operations might conceivably reach workers and members of the public. Environmental surveillance and monitoring results are reported annually to the DOE-Headquarters. This report presents a compilation of data collected in 1997 for the routine environmental surveillance programs conducted on and around the Idaho National Engineering and Environmental Laboratory (INEEL). The results of the various monitoring programs for 1997 indicated that radioactivity from the INEEL operations could generally not be distinguished from worldwide fallout and natural radioactivity in the region surrounding the INEEL. Although some radioactive materials were discharged during INEEL operations, concentrations in the offsite environment and doses to the surrounding population were far less than state of Idaho and federal health protection guidelines.

  10. Introducing ethical, social and environmental issues in ICT engineering degrees

    Directory of Open Access Journals (Sweden)

    Rafael Miñano

    2016-01-01

    Full Text Available This paper describes the experience of introducing ethical, social and environmental issues in undergraduate ICT engineering degrees at the Universidad Politécnica of Madrid. It is an example of both bottom-up and top-down approach, as it has been positively influenced by the European Higher Education Area framework and some external recommendations, plus the significant contribution regarding motivation, drive and previous experience of the teachers involved. The experience before the Bologna Process was concentrated on developing elective courses related on the field of the International Development Cooperation. The integration of those topics within the current engineering curricula, adapted to the European Higher Education Area framework, is being implemented in compulsory courses, elective activities and into Final Year Project. It implies a holistic and comprehensive approach, where appropriate contents, teaching methodologies and assessment methods have been adapted to deal with ethical, social and environmental issues in our academic context. Our work is still in progress and there are a lot of challenges to face, such as improving teaching methodologies, the assessment tools and the achievement of a broader implication of the faculty.

  11. Idaho National Engineering and Environmental Laboratory Wildland Fire Management Environmental Assessment - April 2003

    Energy Technology Data Exchange (ETDEWEB)

    Irving, J.S.

    2003-04-30

    DOE prepared an environmental assessment (EA)for wildland fire management activities on the Idaho National Engineering and Environmental Laboratory (INEEL) (DOE/EA-1372). The EA was developed to evaluate wildland fire management options for pre-fire, fire suppression, and post fire activities. Those activities have an important role in minimizing the conversion of the native sagebrush steppe ecosystem found on the INEEL to non-native weeds. Four alternative management approaches were analyzed: Alternative 1 - maximum fire protection; Alternative 2 - balanced fire protection; Alternative 2 - balanced fire protection; Alternative 3 - protect infrastructure and personnel; and Alternative 4 - no action/traditional fire protection.

  12. Idaho National Engineering and Environmental Laboratory Wildland Fire Management Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Irving, John S

    2003-04-01

    DOE prepared an environmental assessment (EA)for wildland fire management activities on the Idaho National Engineering and Environmental Laboratory (INEEL) (DOE/EA-1372). The EA was developed to evaluate wildland fire management options for pre-fire, fire suppression, and post fire activities. Those activities have an important role in minimizing the conversion of the native sagebrush steppe ecosystem found on the INEEL to non-native weeds. Four alternative management approaches were analyzed: Alternative 1 - maximum fire protection; Alternative 2 - balanced fire protection; Alternative 2 - balanced fire protection; Alternative 3 - protect infrastructure and personnel; and Alternative 4 - no action/traditional fire protection.

  13. Environmental Aspects of the Engineering Training at Technical University

    Directory of Open Access Journals (Sweden)

    V. V. Bushueva

    2015-01-01

    Full Text Available Problem relevance. The article gives a justification for a need to train professionally competent, ecologically oriented engineers capable to create new equipment taking into account the ecological characteristics. Such approach expresses a requirement coherence to develop technical systems and technologies taking into account, both technical reliability and human and environmental safety. Today, in conditions of modern industrial production it is an important point in engineer’s activity. So to train future engineers who meet these requirements new forms and methods are to be found.Objectives. To prove that involvement of creative student’s teams in training the future ecologically oriented engineers is of importance. The organisational structure and methods of activities along with the principles of revitalizing search for engineering ideas and solutions to develop environmentally safe technical systems and technologies allow us to solve more complicated problems. This is the important characteristic in activities of creative groups. The article considers a significance of the future engineer’s responsibility in terms of environment safety. It gives "Methodical advices to analyse the operational impacts of technical systems on the human and environment" to show that there is a need in development of reliable and environment-safe technical systems.Novelty of this work is a technique for the organization and forms of student creative team’s activities. It represents a revised and updated option of a technique of the creative teams working at the industrial enterprises in France. The revised technique takes into consideration both the specifics of student's audience at technical university and the environment-oriented tasks to be solved. Efficiency of search and solution of environment-oriented engineering tasks is enhanced owing to use of revitalizing methods for the creative team’s activities, which are widely used today in student

  14. Environmental engineering education - summary report of the 1st European Seminar

    DEFF Research Database (Denmark)

    Alha, K; Holliger, C.; Larsen, Bo Skjold

    2000-01-01

    the educational needs of environmental engineers. A review of the acceptance of this new discipline by employers and the status of environmental engineering as a profession throughout Europe is presented. The question of how to achieve greater compatibility and comparability of the systems of environmental......This paper summarizes the discussions of the 1st European Seminar on Environmental Engineering Education (E3), which was held at EAWAG, Zurich, Switzerland in August 1999. Although the emerging discipline of environmental engineering, which was once viewed as being a sub-set of civil or chemical...... engineering, has established a status in its own right, a definition of environmental engineering is still not agreed among European engineering educators. This report discusses the variation between European countries and the way in which higher education institutions in these countries address...

  15. Environmental impact assessment of a turboprop engine with the aid of exergy

    International Nuclear Information System (INIS)

    Atılgan, Ramazan; Turan, Önder; Altuntaş, Önder; Aydın, Hakan; Synylo, Kateryna

    2013-01-01

    To develop approaches that effectively reduce engine environmental effect of aircrafts, it is necessary to understand the mechanisms that have enabled improvements in thermodynamic efficiency of aircraft engines. In the present work, a turboprop engine used in regional aircrafts that produces 1948 shp and 640 N.m torque is examined using exergo-environmental method. The results show compressor, combustion chamber, gas generator turbine, power turbine and exhaust nozzle create 9%, 69%, 13%, 7%, 2% of total environmental impact of the engine, respectively. According to rates, the compressor and gas turbine can be considered first to improve in case of component related environmental impact. Furthermore, total component related environmental impact for the turboprop engine is found to be 2.26 mPts/s for the constructional phase and 2.34 mPts/s for the operation/maintenance phases. Accordingly, it is suggested that, in order to estimate environmental impact metric of aircrafts, the exergo-environmental analysis can be employed for aircraft propulsion systems. - Highlights: • Evaluating the exergo-environmental aspects of the turboprop engine. • According to exergo-environmental results, the biggest candidate for improving is the combustion chamber. • Specific environmental impact dominates at engine exhaust outlet of the turboprop engine. • Greatest total component related environmental impact is found at the gas generator turbine of the turboprop engine

  16. The Environmental Compliance Office at the Idaho National Engineering Laboratory

    International Nuclear Information System (INIS)

    Cooper, S.C.

    1990-01-01

    The Idaho Operations Office of the U.S. Department of Energy (DOE-ID) has established an Environmental Compliance Office (ECO) at the Idaho National Engineering Laboratory (INEL). This office has been formed to ensure that INEL operations and activities are in compliance with all applicable environmental state and federal regulations. The ECO is headed by a DOE-ID manager and consists of several teams, each of which is led by a DOE-ID employee with members from DOE-ID, from INEL government contractors, and from DOE-ID consultants. The teams are (a) the negotiated compliance team, (b) the compliance implementation team (CIT), (c) the permits team, (d) the interagency agreement (IAG) team, (e) the consent order and compliance agreement (COCA) oversight team, and (f) the National Environmental Policy Act (NEPA) team. The last two teams were short term and have already completed their respective assignments. The functions of the teams and the results obtained by each are discussed

  17. Examining the Relationship between Resistance to Change and Undergraduate Engineering Students' Environmental Knowledge and Attitudes

    Science.gov (United States)

    Dyehouse, Melissa; Weber, Nicole; Fang, Jun; Harris, Constance; David, Ray; Hua, Inez; Strobel, Johannes

    2017-01-01

    Engineering professional associations identified environmental sustainability as a key responsibility of the educated engineer. Data from national surveys of the general public demonstrate low environmental knowledge levels and a high level of resistance when it comes to environmental behavior. The purpose of this study was to examine the…

  18. Climate engineering field research : The favorable setting of international environmental law

    NARCIS (Netherlands)

    Reynolds, J.L.(Jesse)

    2014-01-01

    As forecasts for climate change and its impacts have become more dire, climate engineering proposals have come under increasing consideration and are presently moving toward field trials. This article examines the relevant international environmental law, distinguishing between climate engineering

  19. Advances in complex societal, environmental and engineered systems

    CERN Document Server

    Essaaidi, Mohammad

    2017-01-01

    This book addresses recent technological progress that has led to an increased complexity in many natural and artificial systems. The resulting complexity research due to the emergence of new properties and spatio-temporal interactions among a large number of system elements - and between the system and its environment - is the primary focus of this text. This volume is divided into three parts: Part one focuses on societal and ecological systems, Part two deals with approaches for understanding, modeling, predicting and mastering socio-technical systems, and Part three includes real-life examples. Each chapter has its own special features; it is a self-contained contribution of distinguished experts working on different fields of science and technology relevant to the study of complex systems. Advances in Complex Systems of Contemporary Reality: Societal, Environmental and Engineered Systems will provide postgraduate students, researchers and managers with qualitative and quantitative methods for handling th...

  20. Evaluation of air pollution modelling tools as environmental engineering courseware.

    Science.gov (United States)

    Souto González, J A; Bello Bugallo, P M; Casares Long, J J

    2004-01-01

    The study of phenomena related to the dispersion of pollutants usually takes advantage of the use of mathematical models based on the description of the different processes involved. This educational approach is especially important in air pollution dispersion, when the processes follow a non-linear behaviour so it is difficult to understand the relationships between inputs and outputs, and in a 3D context where it becomes hard to analyze alphanumeric results. In this work, three different software tools, as computer solvers for typical air pollution dispersion phenomena, are presented. Each software tool developed to be implemented on PCs, follows approaches that represent three generations of programming languages (Fortran 77, VisualBasic and Java), applied over three different environments: MS-DOS, MS-Windows and the world wide web. The software tools were tested by students of environmental engineering (undergraduate) and chemical engineering (postgraduate), in order to evaluate the ability of these software tools to improve both theoretical and practical knowledge of the air pollution dispersion problem, and the impact of the different environment in the learning process in terms of content, ease of use and visualization of results.

  1. Environmental behavior of engineered nanomaterials in porous media: a review.

    Science.gov (United States)

    Park, Chang Min; Chu, Kyoung Hoon; Heo, Jiyong; Her, Namguk; Jang, Min; Son, Ahjeong; Yoon, Yeomin

    2016-05-15

    A pronounced increase in the use of nanotechnology has resulted in nanomaterials being released into the environment. Environmental exposure to the most common engineered nanomaterials (ENMs), such as carbon-based and metal-based nanomaterials, can occur directly via intentional injection for remediation purposes, release during the use of nanomaterial-containing consumer goods, or indirectly via different routes. Recent reviews have outlined potential risks assessments, toxicity, and life cycle analyses regarding ENM emission. In this review, inevitable release of ENMs and their environmental behaviors in aqueous porous media are discussed with an emphasis on influencing factors, including the physicochemical properties of ENMs, solution chemistry, soil hydraulic properties, and soil matrices. Major findings of laboratory column studies and numerical approaches for the transport of ENMs are addressed, and studies on the interaction between ENMs and heavy metal ions in aqueous soil environments are examined. Future research is also presented with specific research directions and outlooks. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Global issues and the natural environmental sciences in curricula for engineers

    OpenAIRE

    Dominik, Janusz; Loizeau, Jean-Luc

    2000-01-01

    Environmental engineering curricula flourish in many Technical Universities in Europe. A quick survey of the teaching content suggests that there is little attention given in the majority of curricula to global issues as they relate to natural environmental sciences and human ecology. We argue that this may result in a lack of fundamental understanding of natural environmental systems among new generation of engineers with negative consequences for environmental management an implementation o...

  3. Evaluation of engineered barriers at the Idaho National Engineering and Environmental Laboratory

    International Nuclear Information System (INIS)

    Bhatt, R.N.; Porro, I.

    1998-03-01

    Subsurface Disposal (SDA) of the Radioactive Waste Management Complex serves as the low level waste burial ground at the Idaho National Engineering and Environmental Laboratory (INEEL). The low level wastes are buried in trenches, pits, and soil vaults in surficial sediments. A closure/post-closure plan must be written prior to closure of the SDA. The closure plan for the facility must include a design for an engineered barrier closure cover that will meet all applicable regulatory requirements. This paper describes the approach being followed at the INEEL to choose an appropriate cover design for the SDA closure. Regulatory requirements and performance objectives potentially applicable to closure of the SDA were identified. Technical issues related to SDA closure were identified from a literature search of previous arid site engineered barrier studies and from previous SDA closure cover evaluations. Five engineered barrier conceptual design alternatives were identified: (1) a bio/capillary barrier cover, (2) a thin soil cover, (3) a thick soil cover, (4) a Resource Conservation and Recovery Act cover, and (5) a concrete sealed surface cover. Two of these designs were chosen for in situ hydraulic testing, rather than all five, in order to maximize the amount of information generated relative to projected project costs. Testing of these two cover designs provides data to quantify hydrologic model input parameters and for verification of site specific hydrologic models for long term closure cover performance evaluation and detailed analysis of closure cover alternatives. The specific objectives of the field tests are to determine the water balance for the two covers over several years and to determine cover soil physical and hydraulic properties

  4. Environmental Field Surveys, EMF Rapid Program, Engineering Project No.3

    Energy Technology Data Exchange (ETDEWEB)

    Enertech Consultants

    1996-04-01

    The EMF Research and Public Information Dissemination Program (RAPID) includes several engineering research in the area of exposure assessment and source characterization. RAPID engineering project No. 3: ''Environmental Field Surveys'' was performed to obtain information on the levels and characteristics of different environments, for which only limited data were available, especially in comparison to magnetic field data for the residential environment and for electric utility facilities, such as power lines and substations. This project was also to provide information on the contribution of various field sources in the surveyed environments. Magnetic field surveys were performed at four sites for each of five environments: schools, hospitals, office buildings, machine shops, and grocery stores. Of the twenty sites surveyed, 11 were located in the San Francisco Bay Area and 9 in Massachusetts. The surveys used a protocol based on magnetic field measurements and observation of activity patterns, designed to provide estimates of magnetic field exposure by type of people and by type of sources. The magnetic field surveys conducted by this project produced a large amount of data which will form a part of the EMF measurement database Field and exposure data were obtained separately for ''area exposure'' and ''at exposure points''. An exposure point is a location where persons engage in fixed, site specific activities near a local source that creates a significant increase in the area field. The area field is produced by ''area sources'', whose location and field distribution is in general not related to the location of the people in the area.

  5. The Idaho National Engineering and Environmental Laboratory Source Water Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sehlke, G.

    2003-03-17

    The Idaho National Engineering and Environmental Laboratory (INEEL) covers approximately 890 square miles and includes 12 public water systems that must be evaluated for Source water protection purposes under the Safe Drinking Water Act. Because of its size and location, six watersheds and five aquifers could potentially affect the INEEL's drinking water sources. Based on a preliminary evaluation of the available information, it was determined that the Big Lost River, Birch Creek, and Little Lost River Watersheds and the eastern Snake River Plain Aquifer needed to be assessed. These watersheds were delineated using the United States Geologic Survey's Hydrological Unit scheme. Well capture zones were originally estimated using the RESSQC module of the Environmental Protection Agency's Well Head Protection Area model, and the initial modeling assumptions and results were checked by running several scenarios using Modflow modeling. After a technical review, the resulting capture zones were expanded to account for the uncertainties associated with changing groundwater flow directions, a this vadose zone, and other data uncertainties. Finally, all well capture zones at a given facility were merged to a single wellhead protection area at each facility. A contaminant source inventory was conducted, and the results were integrated with the well capture zones, watershed and aquifer information, and facility information using geographic information system technology to complete the INEEL's Source Water Assessment. Of the INEEL's 12 public water systems, three systems rated as low susceptibility (EBR-1, Main Gate, and Gun Range), and the remainder rated as moderate susceptibility. No INEEL public water system rated as high susceptibility. We are using this information to develop a source water management plan from which we will subsequently implement an INEEL-wide source water management program. The results are a very robust set of wellhead

  6. Environmental engineering education - summary report of the 1st European Seminar

    DEFF Research Database (Denmark)

    Alha, K; Holliger, C.; Larsen, Bo Skjold

    2000-01-01

    engineering, has established a status in its own right, a definition of environmental engineering is still not agreed among European engineering educators. This report discusses the variation between European countries and the way in which higher education institutions in these countries address...

  7. A comprehensive environmental assessment approach to engineered nanomaterials.

    Science.gov (United States)

    Davis, J Michael

    2013-01-01

    The anticipated benefits of engineered nanomaterials (ENMs) should be weighed against their possible negative impacts. Comprehensive environmental assessment (CEA) provides a means of evaluating such trade-offs in a holistic and systematic manner. CEA consists of both a framework for organizing information and a process for using collective judgment to identify and prioritize the issues presented by ENMs. As a meta-assessment approach, CEA is designed to assist both research planners and risk managers by building on various assessment and analytic tools used by risk assessors. Given the immature state of the science for ENMs, CEA is currently being primarily used for prioritizing research directions. Therefore, highlights of case studies of selected ENM applications are presented to illustrate how CEA has been applied thus far to help guide research efforts to support future assessment efforts. In addition, CEA is discussed in relation to topical subjects, such as sustainability, transparency, and stakeholder engagement. Finally, comparisons to other life cycle-based assessment approaches directed at ENMs are noted. Copyright © 2012 Wiley Periodicals, Inc.

  8. HEAT TRANSFER IN EXHAUST SYSTEM OF A COLD START ENGINE AT LOW ENVIRONMENTAL TEMPERATURE

    OpenAIRE

    Snežana D Petković; Radivoje B Pešić; Jovanka K Lukić

    2010-01-01

    During the engine cold start, there is a significantly increased emission of harmful engine exhaust gases, particularly at very low environmental temperatures. Therefore, reducing of emission during that period is of great importance for the reduction of entire engine emission. This study was conducted to test the activating speed of the catalyst at low environmental temperatures. The research was conducted by use of mathematical model and developed computer programme for calculation of non-s...

  9. In summary: Idaho National Engineering and Environmental Laboratory site environmental report for calendar year 1997

    International Nuclear Information System (INIS)

    Mitchell, R.G.; Roush, D.E. Jr.; Evans, R.B.

    1998-10-01

    Every human is exposed to natural radiation. This exposure comes from many sources, including cosmic radiation from outer space, naturally-occurring radon, and radioactivity from substances in the body. In addition to natural sources of radiation, humans can also be exposed to human-generated sources of radiation. Some examples of these sources include nuclear medicine, X-rays, nuclear weapons testing, and accidents at nuclear power plants. The Idaho National Engineering and Environmental Laboratory (INEEL) is a US Department of Energy (DOE) research facility that deals, in part, with studying nuclear reactors and the storage and cleanup of radioactive materials. Careful handling and rigorous procedures do not completely eliminate the risk of releasing radioactivity. So, there is a possibility for a member of the public near the INEEL to be exposed to radioactivity from the INEEL. Extensive monitoring of the environment takes place one and around the INEEL. These programs search for radionuclides and other contaminants. The results of these programs are presented each year in a site environmental report. This document summarizes the INEEL site environmental report for 1997

  10. Investigation results on water quality and volume of flowing-in water to the Yotsugi slag heap site. 2

    International Nuclear Information System (INIS)

    Naganuma, Masaki; Taki, Tomihiro; Takimoto, Sadao; Makita, A.

    2000-05-01

    Mining water flowing into the Yotsugi slag heap site at the Ningyo-toge Environment Technical Center is exhausted to a common river after carrying out the treatment of uranium and radium in the mining water at the previously settled mining water treatment facility and confirming it to be less than management target value on the river water within the site boundary regulated by the agreement on environmental conservation with Okayama prefecture and Kami-saihara mura. In order to elucidate some required treatment on every water system flowing-in the heap site as a part of reduction of flowing volume on taking action of the heap site, an investigation on its water quality and volume was carried out. As a result, it was confirmed on water quality that uranium values of every river were all less than their target values but radium values of them were all over their target values which necessitated conventional water treatment. And, on water volume, it was confirmed that flowing water volume from the exposed excavation site was reduced about 40% in comparison with same rain-fall before removing from rain water. (G.K.)

  11. Idaho National Engineering and Environmental Laboratory Site Environmental Report for Calendar Year 1997

    Energy Technology Data Exchange (ETDEWEB)

    R. B. Evans; D. Roush; R. W. Brooks; D. B. Martin

    1998-08-01

    The results of the various monitoring programs for 1997 indicated that radioactivity from the Idaho National Engineering and Environmental Laboratory (INEEL) operations could generally not be distinguished from worldwide fallout and natural radioactivity in the region surrounding the INEEL. Although some radioactive materials were discharged during INEEL operations, concentrations in the offsite environment and doses to the surrounding population were far less than state of Idaho and federal health protection guidelines. The maximum potential population dose from submersion, ingestion, inhalation, and deposition to the approximately 121,500 people residing within an 80-km (50-mi) radius from the geographical center of the INEEL was estimated to be 0.2 person-rem (2 x 10-3 person-Sv) using the MDIFF air dispersion model. This population dose is less than 0.0005% of the estimated 43,700 person-rem (437 person-Sv) population dose from background radioactivity.

  12. International evaluation of current and future requirements for environmental engineering education.

    Science.gov (United States)

    Morgenroth, E; Daigger, G T; Ledin, A; Keller, J

    2004-01-01

    The field of environmental engineering is developing as a result of changing environmental requirements. In response, environmental engineering education (E3) needs to ensure that it provides students with the necessary tools to address these challenges. In this paper the current status and future development of E3 is evaluated based on a questionnaire sent to universities and potential employers of E3 graduates. With increasing demands on environmental quality, the complexity of environmental engineering problems to be solved can be expected to increase. To find solutions environmental engineers will need to work in interdisciplinary teams. Based on the questionnaire there was a broad agreement that the best way to prepare students for these future challenges is to provide them with a fundamental education in basic sciences and related engineering fields. Many exciting developments in the environmental engineering profession will be located at the interface between engineering, science, and society. Aspects of all three areas need to be included in E3 and the student needs to be exposed to the tensions associated with linking the three.

  13. Environmental engineering: Saving a threatened resource--In search of solutions

    International Nuclear Information System (INIS)

    Linaweaver, F.P.

    1992-01-01

    This proceedings, Environmental Engineering: Saving a Threatened Resource--In search of solutions, contains papers presented at the 1992 National Conference on Environmental Engineering, a component of Water Forum '92, Baltimore, Maryland, August 2-5, 1992. Some of the topics addressed include air quality; environmental assessment; sludge management and disposal; solid waste, toxic and hazardous materials; water supply and treatment; and water/wastewater infrastructure. In addition, key areas explored are toxicity reduction; urban nonpoint source pollution; incineration; landfills; leachate control; and VOC emissions from wastewater treatment plants. This publication provides the environmental engineer with state-of-the-art information on practical environmental engineering and results from recent advancements in scientific knowledge in this field. Individual papers are processed separately for inclusion in the appropriate data bases

  14. Environmental, Health, and Safety Research Needs for Engineered Nanoscale Materials

    National Research Council Canada - National Science Library

    Alderson, Norris; Alexander, Catherine; Merzbacher, Celia; Chernicoff, William; Middendorf, Paul; Beck, Nancy; Chow, Flora; Poster, Dianne; Danello, Mary Ann; Barrera, Enriqueta

    2006-01-01

    ...) research and information needs related to understanding and management of potential risks of engineered nanoscale materials that may be used, for example, in commercial or consumer products, medical...

  15. Engineering Task Plan to Expand the Environmental Operational Envelope of Core Sampling

    International Nuclear Information System (INIS)

    BOGER, R.M.

    1999-01-01

    This Engineering Task Plan authorizes the development of an Alternative Generation and Analysis (AGA). The AGA will determine how to expand the environmental operating envelope during core sampling operations

  16. Considerations of Environmentally Relevant Test Conditions for Improved Evaluation of Ecological Hazards of Engineered Nanomaterials

    Science.gov (United States)

    Engineered nanomaterials (ENMs) are increasingly entering the environment with uncertain consequences including potential ecological effects. Various research communities view differently whether ecotoxicological testing of ENMs should be conducted using environmentally relevant ...

  17. HEAT TRANSFER IN EXHAUST SYSTEM OF A COLD START ENGINE AT LOW ENVIRONMENTAL TEMPERATURE

    Directory of Open Access Journals (Sweden)

    Snežana D Petković

    2010-01-01

    Full Text Available During the engine cold start, there is a significantly increased emission of harmful engine exhaust gases, particularly at very low environmental temperatures. Therefore, reducing of emission during that period is of great importance for the reduction of entire engine emission. This study was conducted to test the activating speed of the catalyst at low environmental temperatures. The research was conducted by use of mathematical model and developed computer programme for calculation of non-stationary heat transfer in engine exhaust system. During the research, some of constructional parameters of exhaust system were adopted and optimized at environmental temperature of 22 C. The combination of design parameters giving best results at low environmental temperatures was observed. The results showed that the temperature in the environment did not have any significant influence on pre-catalyst light-off time.

  18. Introducing Molecular Biology to Environmental Engineers through Development of a New Course.

    Science.gov (United States)

    Oerther, Daniel B.

    2002-01-01

    Introduces a molecular biology course designed for environmental engineering majors using 16S ribosomal ribonucleic acid-targeted technology that allows students to identify and study microorganisms in bioreactor environments. (Contains 17 references.) (YDS)

  19. Idaho National Engineering and Environmental Laboratory Site Environmental Report for Calendar Year 1998

    Energy Technology Data Exchange (ETDEWEB)

    T. R. Saffle; R. G. Mitchell; R. B. Evans; D. B. Martin

    2000-07-01

    The results of the various monitoring programs for 1998 indicated that radioactivity from the DOE's Idaho National Engineering and Environmental Laboratory (INEEL) operations could generally not be distinguished from worldwide fallout and natural radioactivity in the region surrounding the INEEL. Although some radioactive materials were discharged during INEEL operations, concentrations in the offsite environment and doses to the surrounding population were far less than state of Idaho and federal health protection guidelines. Gross alpha and gross beta measurements, used as a screening technique for air filters, were investigated by making statistical comparisons between onsite or boundary location concentrations and the distant community group concentrations. Gross alpha activities were generally higher at distant locations than at boundary and onsite locations. Air samples were also analyzed for specific radionuclides. Some human-made radionuclides were detected at offsite locations, but most were near the minimum detectable concentration and their presence was attributable to natural sources, worldwide fallout, and statistical variations in the analytical results rather than to INEEL operations. Low concentrations of 137Cs were found in muscle tissue and liver of some game animals and sheep. These levels were mostly consistent with background concentrations measured in animals sampled onsite and offsite in recent years. Ionizing radiation measured simultaneously at the INEEL boundary and distant locations using environmental dosimeters were similar and showed only background levels. The maximum potential population dose from submersion, ingestion, inhalation, and deposition to the approximately 121,500 people residing within an 80-km (50-mi) radius from the geographical center of the INEEL was estimated to be 0.08 person-rem (8 x 10-4 person-Sv) using the MDIFF air dispersion model. This population dose is less than 0.0002 percent of the estimated 43,7 00

  20. Surface Immobilization of Engineered Nanomaterials for in Situ Study of their Environmental Transformations and Fate

    Science.gov (United States)

    The transformation and environmental fate of engineered nanomaterials (ENMs) is the focus of intense research due to concerns about their potential impacts in the environment as a result of their uniquely engineered properties. Many approaches are being applied to investigate th...

  1. Utilization of electromigration in civil and environmental engineering - Processes, transport rates and matrix changes

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Christensen, Iben Vernegren; Rörig-Dalgaard, Inge

    2008-01-01

    reinforcement corrosion while in environmental engineering remediation of heavy metal polluted soil is the issue most studied. Never the less, experiments have been conducted with utilization for several other materials and purposes within both engineering fields. Even though there are many topics of common...

  2. Emissions and possible environmental Implication of engineered nanomaterials (ENMs) in the atmosphere

    NARCIS (Netherlands)

    John, A.C.; Küpper, M.; Manders-Groot, A.M.M.; Debray, B.; Lacome, J.M.; Kuhlbusch, T.A.J.

    2017-01-01

    In spite of the still increasing number of engineered nanomaterial (ENM) applications, large knowledge gaps exist with respect to their environmental fate, especially after release into air. This review aims to summarize the current knowledge of emissions and behavior of airborne engineered

  3. 2002 Wastewater Land Application Site Performance Reports for the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Meachum, T.R.; Lewis, M.G.

    2003-02-20

    The 2002 Wastewater Land Application site Performance Reports for the Idaho National Engineering and Environmental Laboratory describe site conditions for the facilities with State of Idaho Wastewater Land Application Permits. Permit-required monitoring data are summarized, and permit exceedences or environmental impacts relating to the operation of the facilities during the 2002 permit year are discussed.

  4. Integrating Sustainable Development in Chemical Engineering Education: The Application of an Environmental Management System

    Science.gov (United States)

    Montanes, M. T.; Palomares, A. E.; Sanchez-Tovar, R.

    2012-01-01

    The principles of sustainable development have been integrated in chemical engineering education by means of an environmental management system. These principles have been introduced in the teaching laboratories where students perform their practical classes. In this paper, the implementation of the environmental management system, the problems…

  5. 2003 Wastewater Land Application Site Performance Reports for the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Teresa R. Meachum

    2004-02-01

    The 2003 Wastewater Land Application Site Performance Reports for the Idaho National Engineering and Environmental Laboratory describe the conditions for the facilities with State of Idaho Wastewater Land Application Permits. Permit-required monitoring data are summarized, and permit exceedences or environmental impacts relating to the operations of the facilities during the 2003 permit year are discussed.

  6. Environmental Engineering Approaches toward Sustainable Management of Spider Mites.

    Science.gov (United States)

    Suzuki, Takeshi

    2012-10-26

    Integrated pest management (IPM), which combines physical, biological, and chemical control measures to complementary effect, is one of the most important approaches to environmentally friendly sustainable agriculture. To expand IPM, we need to develop new pest control measures, reinforce existing measures, and investigate interactions between measures. Continued progress in the development of environmental control technologies and consequent price drops have facilitated their integration into plant production and pest control. Here I describe environmental control technologies for the IPM of spider mites through: (1) the disturbance of photoperiod-dependent diapause by artificial light, which may lead to death in seasonal environments; (2) the use of ultraviolet radiation to kill or repel mites; and (3) the use of water vapor control for the long-term cold storage of commercially available natural enemies. Such environmental control technologies have great potential for the efficient control of spider mites through direct physical effects and indirect effects via natural enemies.

  7. Engineering and Computing Portal to Solve Environmental Problems

    Science.gov (United States)

    Gudov, A. M.; Zavozkin, S. Y.; Sotnikov, I. Y.

    2018-01-01

    This paper describes architecture and services of the Engineering and Computing Portal, which is considered to be a complex solution that provides access to high-performance computing resources, enables to carry out computational experiments, teach parallel technologies and solve computing tasks, including technogenic safety ones.

  8. Integration of project management and systems engineering: Tools for a total-cycle environmental management system

    International Nuclear Information System (INIS)

    Blacker, P.B.; Winston, R.

    1997-01-01

    An expedited environmental management process has been developed at the Idaho National Engineering and Environmental Laboratory (INEEL). This process is one result of the Lockheed Martin commitment to the US Department of Energy to incorporate proven systems engineering practices with project management and program controls practices at the INEEL. Lockheed Martin uses a graded approach of its management, operations, and systems activities to tailor the level of control to the needs of the individual projects. The Lockheed Martin definition of systems engineering is: ''''Systems Engineering is a proven discipline that defines and manages program requirements, controls risk, ensures program efficiency, supports informed decision making, and verifies that products and services meet customer needs.'''' This paper discusses: the need for an expedited environmental management process; how the system was developed; what the system is; what the system does; and an overview of key components of the process

  9. Integrating Environmental Management in Chemical Engineering Education by Introducing an Environmental Management System in the Student's Laboratory

    Science.gov (United States)

    Montanes, Maria T.; Palomares, Antonio E.

    2008-01-01

    In this work we show how specific challenges related to sustainable development can be integrated into chemical engineering education by introducing an environmental management system in the laboratory where the students perform their experimental lessons. It is shown how the system has been developed and implemented in the laboratory, what role…

  10. Environmental Barrier Coatings for Turbine Engines: A Design and Performance Perspective

    Science.gov (United States)

    Zhu, Dongming; Fox, Dennis S.; Ghosn, Louis; Smialek, James L.; Miller, Robert A.

    2009-01-01

    Ceramic thermal and environmental barrier coatings (TEBC) for SiC-based ceramics will play an increasingly important role in future gas turbine engines because of their ability to effectively protect the engine components and further raise engine temperatures. However, the coating long-term durability remains a major concern with the ever-increasing temperature, strength and stability requirements in engine high heat-flux combustion environments, especially for highly-loaded rotating turbine components. Advanced TEBC systems, including nano-composite based HfO2-aluminosilicate and rare earth silicate coatings are being developed and tested for higher temperature capable SiC/SiC ceramic matrix composite (CMC) turbine blade applications. This paper will emphasize coating composite and multilayer design approach and the resulting performance and durability in simulated engine high heat-flux, high stress and high pressure combustion environments. The advances in the environmental barrier coating development showed promise for future rotating CMC blade applications.

  11. Environmental resource document for the Idaho National Engineering Laboratory. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Irving, J.S.

    1993-07-01

    This document contains information related to the environmental characterization of the Idaho National Engineering Laboratory (INEL). The INEL is a major US Department of Energy facility in southeastern Idaho dedicated to nuclear research, waste management, environmental restoration, and other activities related to the development of technology. Environmental information covered in this document includes land, air, water, and ecological resources; socioeconomic characteristics and land use; and cultural, aesthetic, and scenic resources.

  12. Environmental resource document for the Idaho National Engineering Laboratory. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Irving, J.S.

    1993-07-01

    This document contains information related to the environmental characterization of the Idaho National Engineering Laboratory (INEL). The INEL is a major US Department of Energy facility in southeastern Idaho dedicated to nuclear research, waste management, environmental restoration, and other activities related to the development of technology. Environmental information covered in this document includes land, air, water, and ecological resources; socioeconomic characteristics and land use; and cultural, aesthetic, and scenic resources.

  13. Engineering Environmentally-Stable Proteases to Specifically Neutralize Protein Toxins

    Science.gov (United States)

    2013-10-01

    synthesized as a fusion protein on the surface of M13 phage . The random library of subtilisin phage is mixed with the GA- PLFRAL-S-GB substrate...factor (LF), representing four functionally distinct families of toxins. The centerpiece of our design effort is a phage -display selection method for...hour assay. 15. SUBJECT TERMS Enterotoxin, protease, directed evolution, subtilisin, protein engineering, phage -display, enzymology 16. SECURITY

  14. Engineering solutions of environmental problems in organic waste handling

    Science.gov (United States)

    Briukhanov, A. Y.; Vasilev, E. V.; Shalavina, E. V.; Kucheruk, O. N.

    2017-10-01

    This study shows the urgent need to consider modernization of agricultural production in terms of sustainable development, which takes into account environmental implications of intensive technologies in livestock farming. Some science-based approaches are offered to address related environmental challenges. High-end technologies of organic livestock waste processing were substantiated by the feasibility study and nutrient balance calculation. The technologies were assessed on the basis of best available techniques criteria, including measures such as specific capital and operational costs associated with nutrient conservation and their delivery to the plants.

  15. Environmental optimisation of natural gas fired engines. Main report

    Energy Technology Data Exchange (ETDEWEB)

    Kvist, T. et al.

    2010-10-15

    The overall aim of the project has been to assess to which extent it is possible to reduce the emissions by adjusting the different engines examined and to determine the cost of the damage caused by emissions from natural gas combustion. However, only health and climate effects are included. The emissions of NO{sub x}, CO and UHC as well as the composition of the hydrocarbon emissions were measured for four different stationary lean-burn natural-gas fired engines installed at different combined heat and power (CHP) units in Denmark. The units were chosen to be representative of the natural gas fired engine-based power production in Denmark. The measurements showed that NO{sub x} emissions were relatively more sensitive to engine setting than UHC, CO and formaldehyde emissions. By reducing the NO{sub x} emissions to 40 % of the initial value (from 500 to 200 mg/m3(n) at 5 % O{sub 2}) the UHC emission was increased by 10 % to 50 % of the initial value. The electrical efficiency was reduced by 0.5 to 1.0 percentage point. Externalities in relation to power production are defined as the costs, which are not directly included in the price of the produced power. Health effects related to air pollution from power plants fall under this definition and usually dominate the results on external costs. For determination of these effects the exposure of the population, the impact of the exposure and the societal costs accompanying the impacts have been evaluated. As expected, it was found that when the engines are adjusted in order to reduce NO{sub x} emissions, the emission of UHC increases and vice versa. It was found that at high NO{sub x} emission levels (500 mg/m3{sub n} at 5 % O{sub 2}) the external costs related to the NO{sub x} emissions are 15 to 25 times the costs related to UHC emissions. At low NO{sub x} emission levels (200 mg/m3{sub n} at 5 % O{sub 2}) the costs related to NO{sub x} are 5 to 8 times the costs related to UHC emissions. Apparently, the harmfulness

  16. Genetically-engineered baculovirus pesticides and their environmental safety

    Science.gov (United States)

    H. Alan Wood; Yu Zailin

    1991-01-01

    Baculoviruses such as the Lymantria dispar nuclear polyhedrosis virus (LdMNPV) are ecologically attractive alternatives to chemical insect pesticides but have a slow rate of control. To overcome this we have developed and are field testing an environmentally acceptable strategy which can be used for the introduction and expression of pesticide-...

  17. Environmental sensitive road planning and transportation techniques in forest engineering

    Directory of Open Access Journals (Sweden)

    H. Hulusi Acar

    2016-07-01

    Full Text Available Forestry management has activities dealing with technical, economic, social and environmental services. Forestry operations which are carried out on forest areas , an important part of the ecosistem are materialized in open space. This forestry activities on large areas and high sloping generally, include many different techniques. It is needed primarily to the forest road network in terms of forest management. Determining the approriate route in the natural environment, planning and road construction affairs for forest roads which are necessary accessing in forest areas, is also of great importance from an environmental viewpoint as well as technical and economic manner. Forest road planning which can not be changed later and left a permanent mark on the natural environment carries much more importance to the environment especially on sloping land. This is because, it is important choosing correct type of roaf structure, and doing periodic maintenance of the roads. Skidding activities, after wood production, is important in terms of its impact on forest soil and by means of effects on saplings and trees on the releated forest areas.The development of environmental sensitive techniques is difficult, limited or expensive for this wood extraction works which are made more difficult conditons in the sloping terrain. Therefore, especially in using some silvicultural methods wood extraction damages are even greater. In this study; some road planning, road construction and wood extraction techniques which performed by me have been made to examine the environmental aspects. Environment-friendly forest roads and primary transport techniques on the forest ecosystem are briefly explained and discussed in the frame of the environmental aspects.

  18. Findings on Motivation and the Environmental Awareness and Practice of Future Engineers in Zagreb

    Directory of Open Access Journals (Sweden)

    Damir Milos

    2014-04-01

    Full Text Available This article is the result of a survey conducted on first year students of the Faculty of Mechanical Engineering and Naval Architecture in Zagreb. Heavy particles in the focus of this article are intrinsic and extrinsic motivation of students and their ecological awareness and practice. Accordingly, we wanted to examine which form of motivation was prevalent in students when choosing a career in engineering and the degree of environmental awareness and practice of those students. The results show that extrinsic elements of motivation were more important to students in terms of their future career. When it comes to environmental awareness and practices, results show a higher level of environmental awareness and practices among students. Conclusively, it can be noted that the dominance of extrinsic motivation for a career does not compromise the interest in environmental issues or environmental practices.

  19. Renewable energy physics, engineering, environmental impacts, economics & planning

    CERN Document Server

    Sorensen, Bent

    2011-01-01

    This volume is a true shelf reference, providing a thorough overview of the entire renewable energy sphere, while still functioning as a go-to information source for professionals and students when they need answers about a specific technical issue. Crafted over the last 15 years into a problem-solving tool for engineers, researchers, consultants and planners currently working in the field, as well as a detailed map of the renewables universe for those looking to expand into new technological specialties, Renewable Energy by Sorensen offers the most comprehensive coverage of the subject available.

  20. Environmental concentrations of engineered nanomaterials: Review of modeling and analytical studies

    International Nuclear Information System (INIS)

    Gottschalk, Fadri; Sun, TianYin; Nowack, Bernd

    2013-01-01

    Scientific consensus predicts that the worldwide use of engineered nanomaterials (ENM) leads to their release into the environment. We reviewed the available literature concerning environmental concentrations of six ENMs (TiO 2 , ZnO, Ag, fullerenes, CNT and CeO 2 ) in surface waters, wastewater treatment plant effluents, biosolids, sediments, soils and air. Presently, a dozen modeling studies provide environmental concentrations for ENM and a handful of analytical works can be used as basis for a preliminary validation. There are still major knowledge gaps (e.g. on ENM production, application and release) that affect the modeled values, but over all an agreement on the order of magnitude of the environmental concentrations can be reached. True validation of the modeled values is difficult because trace analytical methods that are specific for ENM detection and quantification are not available. The modeled and measured results are not always comparable due to the different forms and sizes of particles that these two approaches target. -- Highlights: •Modeled environmental concentrations of engineered nanomaterials are reviewed. •Measured environmental concentrations of engineered nanomaterials are reviewed. •Possible validation of modeled data by measurements is critically evaluated. •Different approaches in modeling and measurement methods complicate validation. -- Modeled and measured environmental concentrations of engineered nanomaterials are reviewed and critically discussed

  1. Engineering, environmental and economic planning for tailings disposal

    International Nuclear Information System (INIS)

    Poellot, J.H.

    1982-01-01

    There are two principal points made in this paper. First, mining waste materials, or tailings, are geotechnical materials. Their behavior follows the principles of soil mechanics and is predictable by these principles. Second, proper disposal, meaning safe, environmentally sound and economical disposal, requires planning and recognizing waste disposal as part of the total mining system and process. In the development of these two principles, planning, design, and economic considerations of mine tailings are discussed

  2. Bridging Water Resources Policy and Environmental Engineering in the Classroom at Cornell University

    Science.gov (United States)

    Walter, M. T.; Shaw, S. B.; Seifert, S.; Schwarz, T.

    2006-12-01

    Current university undergraduate students in environmental sciences and engineering are the next generation of environmental protection practitioners. Recognizing this, Cornell's Biological and Environmental Engineering department has developed a popular class, Watershed Engineering (BEE 473), specifically designed to bridge the too-common gap between water resources policy and state-of-art science and technology. Weekly homework assignments are to design real-life solutions to actual water resources problems, often with the objective of applying storm water policies to local situations. Where appropriate, usually in conjunction with recent amendments to the Federal Clean Water Act, this course introduces water resource protection tools and concepts developed in the Cornell Soil and Water Lab. Here we present several examples of how we build bridges between university classrooms and the complex world of water resources policy.

  3. Department of Energy environmental management complex-wide integration using systems engineering

    Energy Technology Data Exchange (ETDEWEB)

    Fairbourn, P.

    1997-10-01

    A systems engineering approach was successfully used to recommend changes to environmental management activities across the DOE Complex. A team of technical experts and systems engineers developed alternatives that could save tax payers billions of dollars if the barriers are removed to allow complete implementation. The alternatives are technically-based and defensible, and are being worked through the stakeholder review process. The integration process and implementing project structure are both discussed.

  4. Environmental Assessment for Installation of a New Jet Engine Test Cell, Edwards Air Force Base, California

    Science.gov (United States)

    2012-09-01

    Acetal· Ethyle- Formal- Naph- Ethyle- Formal- Tested Power Setting h’"~ lbslhr’ dehyde Acrolein Ben~ene ben~ene dehyde thalene Scyrene Tolueue Xylenes...TIM Fuel Flow Engine!i per setting, .. I, Acetal- Ethyle- Formal- Naph- Ethyle- Formal- Tested Power Settin hours lb lhrl. dehyde Acrolein Benzene...ENVIRONMENTAL ASSESSMENT FOR INSTALLATION OF A NEW JET ENGINE TEST CELL EDWARDS AIR FORCE BASE, CALIFORNIA September

  5. Emissions and possible environmental Implication of engineered nanomaterials (ENMs) in the atmosphere

    OpenAIRE

    John, A.C.; Küpper, M.; Manders-Groot, A.M.M.; Debray, B.; Lacome, J.M.; Kuhlbusch, T.A.J.

    2017-01-01

    In spite of the still increasing number of engineered nanomaterial (ENM) applications, large knowledge gaps exist with respect to their environmental fate, especially after release into air. This review aims to summarize the current knowledge of emissions and behavior of airborne engineered nanomaterials. The whole ENM lifecycle is considered from the perspective of possible releases into the atmosphere. Although in general, emissions during use phase and end-of-life seem to play a minor role...

  6. Using stated preferences to estimate the environmental benefits of using biodiesel fuel in diesel engines

    OpenAIRE

    Jeanty, Pierre Wilner; Hitzhusen, Frederick J.

    2007-01-01

    Using biodiesel fuel to reduce emissions from diesel engines is an area of increasing interest. Many environmental benefits associated with biodiesel are not traded in markets and their estimation requires economic valuation methods applied to non-market goods and services. This paper presents the results of a contingent valuation survey conducted in 2006 in two Ohio regions to estimate willingness to pay for air pollution reduction arising from using biodiesel fuel in diesel engines. The dou...

  7. Department of Energy environmental management complex-wide integration using systems engineering

    International Nuclear Information System (INIS)

    Fairbourn, P.

    1997-01-01

    A systems engineering approach was successfully used to recommend changes to environmental management activities across the DOE Complex. A team of technical experts and systems engineers developed alternatives that could save tax payers billions of dollars if the barriers are removed to allow complete implementation. The alternatives are technically-based and defensible, and are being worked through the stakeholder review process. The integration process and implementing project structure are both discussed

  8. Environmental concept for engineering software on MIMD computers

    Science.gov (United States)

    Lopez, L. A.; Valimohamed, K.

    1989-01-01

    The issues related to developing an environment in which engineering systems can be implemented on MIMD machines are discussed. The problem is presented in terms of implementing the finite element method under such an environment. However, neither the concepts nor the prototype implementation environment are limited to this application. The topics discussed include: the ability to schedule and synchronize tasks efficiently; granularity of tasks; load balancing; and the use of a high level language to specify parallel constructs, manage data, and achieve portability. The objective of developing a virtual machine concept which incorporates solutions to the above issues leads to a design that can be mapped onto loosely coupled, tightly coupled, and hybrid systems.

  9. Study of the space environmental effects on spacecraft engineering materials

    Science.gov (United States)

    Obrien, Susan K.; Workman, Gary L.; Smith, Guy A.

    1995-01-01

    The space environment in which the Space Station Freedom and other space platforms will orbit is truly a hostile environment. For example, the current estimates of the integral fluence for electrons above 1 Mev at 2000 nautical miles is above 2 x 10(exp 10) electrons/sq cm/day. and the proton integral fluence is above 1 x 109 protons/sq cm/day. At the 200 - 400 nautical miles, which is more representative of the altitude which will provide the environment for the Space Station, each of these fluences will be proportionately less; however, the data indicates that the radiation environment will obviously have an effect on structural materials exposed to the environment for long durations. The effects of this combined environment is the issue which needs to be understood for the long term exposure of structures in space. In order to better understand the effect of these hostile phenomena on spacecraft, several types of studies are worth performing in order to simulate at some level the effect of the environment. For example the effect of protons and electrons impacting structural materials are easily simulated through experiments using the Van de Graff and Pelletron accelerators currently housed in the Environmental Effects Facility at MSFC. Proton fluxes with energies of 700 Kev-2.5 Mev can be generated and used to impinge on sample targets to determine the effects of the particles. Also the Environmental Effects Facility has the capability to generate electron beams with energies from 700 Kev to 2.5 Mev. These facilities will be used in this research to simulate space environmental effects from energetic particles. Ultraviolet radiation, particularly in the ultraviolet (less than 400 nm wavelength) is less well characterized at this time. The Environmental Effects Facility has a vacuum system dedicated to studying the effects of ultraviolet radiation on specific surface materials. This particular system was assembled in a previous study (NAS8-38609) in order to

  10. Exergy, Economic and Environmental Analysis for Simple and Combined Heat and Power IC Engines

    Directory of Open Access Journals (Sweden)

    Mehdi Aliehyaei

    2015-04-01

    Full Text Available This study reports the results of exergy, economic and environmental analyses of simple and combined heat and power internal combustion engines. Values of entropy production, second law efficiency are calculated, and an objective function, including initial, operation, maintenance and fuel costs, as well as the external costs of environmental pollutants, such as CO2, CO and NOx, are presented for the flue gas of the internal combustion engine. The results show that entropy generation in the combined heat and power mode is 30% lower than that in the simple internal combustion engine. Also, by excessively increasing the air ratio, the system entropy generation decreases in both cases of simple and combined heat and power IC engines. The greatest portion of entropy generation is related to the combined heat and power internal combustion engine. The gas heat exchanger generates more entropy than the jacket heat exchanger. Lower values of electricity cost and external costs of air pollution are provided by higher values of molar air to fuel ratio. The environmental aspects depend on location of the system and time of engine operation.

  11. Engineered modular biomaterial logic gates for environmentally triggered therapeutic delivery

    Science.gov (United States)

    Badeau, Barry A.; Comerford, Michael P.; Arakawa, Christopher K.; Shadish, Jared A.; Deforest, Cole A.

    2018-03-01

    The successful transport of drug- and cell-based therapeutics to diseased sites represents a major barrier in the development of clinical therapies. Targeted delivery can be mediated through degradable biomaterial vehicles that utilize disease biomarkers to trigger payload release. Here, we report a modular chemical framework for imparting hydrogels with precise degradative responsiveness by using multiple environmental cues to trigger reactions that operate user-programmable Boolean logic. By specifying the molecular architecture and connectivity of orthogonal stimuli-labile moieties within material cross-linkers, we show selective control over gel dissolution and therapeutic delivery. To illustrate the versatility of this methodology, we synthesized 17 distinct stimuli-responsive materials that collectively yielded all possible YES/OR/AND logic outputs from input combinations involving enzyme, reductant and light. Using these hydrogels we demonstrate the first sequential and environmentally stimulated release of multiple cell lines in well-defined combinations from a material. We expect these platforms will find utility in several diverse fields including drug delivery, diagnostics and regenerative medicine.

  12. Recycled aggregates in concrete production: engineering properties and environmental impact

    Directory of Open Access Journals (Sweden)

    Seddik Meddah Mohammed

    2017-01-01

    Full Text Available Recycled concrete aggregate is considered as the most abundant and used secondary aggregate in concrete production, other types of solid waste are also being used in concrete for specific purposes and to achieve some desired properties. Recycled aggregates and particularly, recycled concrete aggregate substantially affect the properties and mix design of concrete both at fresh and hardened states since it is known by high porosity due to the adhered layer of old mortar on the aggregate which results in a high water absorption of the recycled secondary aggregate. This leads to lower density and strength, and other durability related properties. The use of most recycled aggregate in concrete structures is still limited to low strength and non-structural applications due to important drop in strength and durability performances generated. Embedding recycled aggregates in concrete is now a current practice in many countries to enhance sustainability of concrete industry and reduce its environmental impacts. The present paper discusses the various possible recycled aggregates used in concrete production, their effect on both fresh and hardened properties as well as durability performances. The economic and environmental impacts of partially or fully substituting natural aggregates by secondary recycled aggregates are also discussed.

  13. Environmental optimisation of natural gas fired engines. Measurement on four different engines. Project report

    Energy Technology Data Exchange (ETDEWEB)

    Kvist, T.

    2010-10-15

    The emissions of NO{sub x}, CO and UHC as well as the composition of the hydrocarbon emissions were measured for four different stationary lean burn natural gas fired engines installed at different combined heat and power (CHP) units in Denmark. The units have been chosen to be representative for the natural gas engine based on power production in Denmark. The NO{sub x} emissions were varied from around 200 to 500 mg/m3(n) by varying the ignition timing and the excess of air. For each of the examined engines measurements were conducted at different combinations of ignition timing and excess of air. The measurements showed the NO{sub x} emissions were relatively more sensitive to engine setting than UHC, CO and formaldehyde emissions. By reducing the NO{sub x} emissions to 40 % of the initial value (from 500 to 200 mg/m3(n)) the UHC emission were increased by 10 % to 50 % of the initial value. The electrical efficiency was reduced by 0,5 to 1,0 % point. (Author)

  14. Environmental and safety problems of waste management in nuclear engineering

    International Nuclear Information System (INIS)

    Schwibach, J.; Jacobi, W.

    1976-01-01

    The environmental and safety problems which waste management in nuclear technology poses are discussed under the aspects of the disposal of radioactive waste by nuclear facilities and the safety of radioactive waste disposal. The release and global distribution of long-lived radionuclides such as tritium, Kr-85, C-14, I-129, and Pu-239 as well as the radiation exposure of the world population resulting thereof are investigated, the authors starting from a specific production rate of the nuclides released from nuclear facilities. Definitions of the terms 'dose commitment' and 'collective dose commitment' are given. Furthermore, local radiation exposure in reprocessing plants is investigated and compared with regional and global radiation exposure. A recommendation is made to take measures which would reduce the nuclides tritium, Kr-85, and C-14 in order to achieve considerably smaller collective doses. (HR/LN) [de

  15. Database application for changing data models in environmental engineering

    Energy Technology Data Exchange (ETDEWEB)

    Hussels, Ulrich; Camarinopoulos, Stephanos; Luedtke, Torsten; Pampoukis, Georgios [RISA Sicherheitsanalysen GmbH, Berlin-Charlottenburg (Germany)

    2013-07-01

    Whenever a technical task is to be solved with the help of a database application and uncertainties regarding the structure, scope or level of detail of the data model exist (either currently or in the future) the use of a generic database application can reduce considerably the cost of implementation and maintenance. Simultaneously the approach described in this contribution permits the operation with different views on the data and even finding and defining new views which had not been considered before. The prerequisite for this is that the preliminary information (structure as well as data) stored into the generic application matches the intended use. In this case, parts of the generic model developed with the generic approach can be reused and according efforts for a major rebuild can be saved. This significantly reduces the development time. At the same time flexibility is achieved concerning the environmental data model, which is not given in the context of conventional developments. (orig.)

  16. Radioactive waste products and environmental problems of atomic engineering

    International Nuclear Information System (INIS)

    Abbasov, S.M.; Kerimova, T.I.

    2004-01-01

    Full text : Receiving and use of an atomic energy is one of the basic kinds of the industry on production of energy. radioactive waste products manufactured as a result of this remaining active for a long time cannot be destroyed by known methods. A unique method of their neutralization is the burial of waste products of the nuclear industry in the nuclear storehouses intended for these purposes where isolated radioactive substances in due course lose their properties and cease to be dangerous. In this clause also comparison of atomic engineering with other kinds of the industry on manufacture of energy is shown. It is known that for functioning of these stations it is required much more water, than for other kinds of thermal stations, therefore they are being constructed on the rivers costs, that certainly makes direct threat for near located settlements. In order to prevent the infection radiometric measurements of an environment conditions are periodically carried out in effective areas of these plants [ru

  17. Preliminary draft: environmental impact statement for Hot Fuels Engineering Laboratory

    International Nuclear Information System (INIS)

    Boyle, J.W.; Carpenter, J.A. Jr.; Cotter, S.J.; Harrington, F.E.; Hinkle, N.E.; Johnson, D.R.; Kroodsma, R.L.; Lin, K.H.

    1980-03-01

    The proposed action considered in this report is the construction and operation of the Hot Fuels Engineering Laboratory (HFEL) to be located in Building 7930, the Thorium-Uranium Recycle Facility (TURF), at Oak Ridge National Laboratory. The successful operation of the HFEL, as described in this report, will provide generic demonstrations of safe, economical fuel fabrication processes for fuels which are inherently highly radioactive or fuels to which a high level of radioactivity has been added to reduce the probability of illicit diversion. The proposed action will demonstrate the process and equipment remote operability with high levels of radioactivity present (up to 10,000 R/h). Three fuel fabrication processes will be tested: the gel-sphere-pac and sphere-cal processes for metal clad fuel pins and the production of HTGR-green-fuel-rods for insertion into graphite elements. Each process will be tested for two types of fuel: uranium-plutonium and 233 U-thorium. In each case, the product will be a small number of fuel pins or rods, which will be suitable for testing in other phases of the National Program Plan of the Department of Energy. The facility will accommodate other types of fuels and processes if so desired

  18. Environmental surveillance for Waste Management Facilities at the Idaho National Engineering Laboratory. Annual report 1994

    Energy Technology Data Exchange (ETDEWEB)

    Wright, K.C.; Wilhelmsen, R.N.; Borsella, B.W.; Miles, M.

    1995-08-01

    This report describes calendar year 1994 environmental surveillance activities of Environmental Monitoring of Lockheed Martin Idaho Technologies, performed at Waste Management Facilities at the Idaho National Engineering Laboratory (INEL). The major facilities monitored include the Radioactive Waste Management Complex, the Waste Experimental Reduction Facility, the Mixed Waste Storage Facility, and two surplus facilities. Included are results of the sampling performed by the Radiological Environmental Surveillance Program, INEL Environmental Surveillance Program, and the United States Geological Survey. The primary purposes of monitoring are to evaluate environmental conditions, to provide and interpret data, to ensure compliance with applicable regulations or standards, and to ensure protection of human health and the environment. This report compares 1994 environmental surveillance data with US Department of Energy derived concentration guides and with data from previous years.

  19. Environmental monitoring for EG and G Idaho facilities at the Idaho National Engineering Laboratory

    International Nuclear Information System (INIS)

    Tkachyk, J.W.; Wright, K.C.; Wilhelmsen, R.N.

    1990-08-01

    This report describes the 1989 environmental-monitoring activities of the Environmental Monitoring Unit of EG ampersand G Idaho, Inc., at EG ampersand G-operated facilities at the Idaho National Engineering Laboratory (INEL). The major facilities monitored include the Radioactive Waste Management Complex, the Waste Experimental Reduction Facility, the Mixed Waste Storage Facility, and two surplus facilities. Additional monitoring activities performed by Environmental Monitoring are also discussed, including drinking-water monitoring and nonradiological liquid-effluent monitoring, as well as data management. The primary purposes of monitoring are to evaluate environmental conditions and to provide and interpret data, in compliance with applicable regulations, to ensure protection of human health and the environment. This report compares 1989 environmental-monitoring data with derived concentration guides and with data from previous years. This report also presents results of sampling performed by the Radiological and Environmental Sciences Laboratory and by the United States Geological Survey. 17 refs., 49 figs., 11 tabs

  20. Does environmental economics produce aeroplanes without engines? On the need for an environmental social science

    NARCIS (Netherlands)

    Folmer, Henk; Johansson-Stenman, Olof

    In this paper we first critically review conventional environmental economics. We conclude that the standard theory offers too narrow a perspective for many real world problems and that many theories are not empirically tested. Consequently, environmental economics is at risk of producing aeroplanes

  1. Evaluation of environmental filtration control of engineered nanoparticles using the Harvard Versatile Engineered Nanomaterial Generation System (VENGES)

    Science.gov (United States)

    Echevarría-Vega, Manuel E.; Sotiriou, Georgios A.; Santeufemio, Christopher; Schmidt, Daniel; Demokritou, Philip; Ellenbecker, Michael

    2013-01-01

    Applying engineering controls to airborne engineered nanoparticles (ENPs) is critical to prevent environmental releases and worker exposure. This study evaluated the effectiveness of two air sampling and six air cleaning fabric filters at collecting ENPs using industrially relevant flame-made engineered nanoparticles generated using a versatile engineered nanomaterial generation system (VENGES), recently designed and constructed at Harvard University. VENGES has the ability to generate metal and metal oxide exposure atmospheres while controlling important particle properties such as primary particle size, aerosol size distribution, and agglomeration state. For this study, amorphous SiO2 ENPs with a 15.4 nm primary particle size were generated and diluted with HEPA-filtered air. The aerosol was passed through the filter samples at two different filtration face velocities (2.3 and 3.5 m/min). Particle concentrations as a function of particle size were measured upstream and downstream of the filters using a specially designed filter test system to evaluate filtration efficiency. Real time instruments (FMPS and APS) were used to measure particle concentration for diameters from 5 to 20,000 nm. Membrane-coated fabric filters were found to have enhanced nanoparticle collection efficiency by 20–46 % points compared to non-coated fabric and could provide collection efficiency above 95 %. PMID:23412707

  2. Report for Working Group 1: Design Research in Civil and Environmental Engineering

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn; Paradisi, Irene

    2013-01-01

    The first 2013 DCEE working group meeting focused on issues associated with design research in civil and environmental engineering. It addressed some of the motivation for establishing design as a research discipline in CEE and some of the challenges and outstanding questions about how to do so....

  3. Virtual Placements to Develop Employability Skills for Civil and Environmental Engineering Students

    Science.gov (United States)

    Paul, Parneet

    2015-01-01

    This project work addresses the crucial need to encourage undergraduate civil and environmental engineering students to gain employment skills and training right from the start of their studies so that their overall employability increases; their confidence level in networking with industry and within the workplace increases; and so that they are…

  4. Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory - Calendar Year 1998 Emissions Report

    Energy Technology Data Exchange (ETDEWEB)

    S. K. Zohner

    1999-10-01

    This report presents the 1998 calendar year update of the Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL Air Emission Inventory documents sources and emissions of nonradionuclide pollutants from operations at the INEEL. The report describes the emission inventory process and all of the sources at the INEEL, and provides nonradiological emissions estimates for stationary sources.

  5. Detecting and Characterizing Engineered Nanomaterials: A Key Tool for Environmentally Responsible Nanotechnology

    Science.gov (United States)

    The same properties of engineered nanomaterials (ENMs) that are the basis for their many novel applications also raise important issues related to their environmental impact. ENMs might not behave similarly in the environment to the dissolved or solid forms of the chemicals from ...

  6. Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory - Calendar Year 1999 Emission Report

    Energy Technology Data Exchange (ETDEWEB)

    Zohner, S.K.

    2000-05-30

    This report presents the 1999 calendar year update of the Air Emission Inventory for the Idaho National Engineering and Environmental Laboratory (INEEL). The INEEL Air Emission Inventory documents sources and emissions of nonradionuclide pollutants from operations at the INEEL. The report describes the emission inventory process and all of the sources at the INEEL, and provides nonradionuclide emissions estimates for stationary sources.

  7. Skill Sets Required for Environmental Engineering and Where They Are Learned

    Science.gov (United States)

    Reed, Kathaleen

    2010-01-01

    The purpose of this study was to investigate the knowledge, skills, abilities and traits environmental engineers need. Two questions were asked: what skills are considered important, and where are they learned? Dreyfus and Dreyfus' novice-to-expert model, which describes a progressive, five-step process of skill development that occurs over time…

  8. Environmental Barrier Coatings for the Energy Efficient Heat Engines Program

    Energy Technology Data Exchange (ETDEWEB)

    Katherine Faber

    2004-10-31

    This program aimed to develop a fundamental understanding of the microstructural, mechanical, and chemical properties of Ta{sub 2}O{sub 5}-based coatings for Si{sub 3}N{sub 4} (AS800) substrates and optimize such coatings for environmental barriers. The program consisted of three tasks: processing of Ta{sub 2}O{sub 5} coatings, phase and microstructural development, and life-limiting phenomena. Northwestern University formed a cross-functional team with Lehigh University, Honeywell Inc., and Oak Ridge National Laboratory. The major accomplishments are: (1) Conditions for the plasma spray of Ta{sub 2}O{sub 5} and its alloys were optimized to provide maximum density and thickness. (2) Adherent small particle plasma spray coatings of Ta{sub 2}O{sub 5} can be routinely prepared. (3) Ta{sub 2}O{sub 5} can be stabilized against its disruptive phase transformation to 1400 C by the addition of one or more oxides of Al, La, and/or Nb. (4) Residual stresses in the Ta{sub 2}O{sub 5} coatings were measured using X-rays and changed with thermal exposure. (5) Properly doped coatings are more resistant against thermal cycling than undoped coatings, and can be cycled many thousand times without spallation. (6) Water vapor testing in the ORNL Keiser Rig of adherent coatings showed that undoped Ta{sub 2}O{sub 5} is not an effective barrier at preventing chemical changes to the AS800. (7) Limited water vapor testing of doped and adherent coatings, which had successfully survived many thermal cycles, showed that in the water vapor environment, de-cohesion may occur.

  9. The Role of Alternative Testing Strategies in Environmental Risk Assessment of Engineered Nanomaterials

    DEFF Research Database (Denmark)

    Hjorth, Rune; Holden, Patricia; Hansen, Steffen Foss

    2017-01-01

    ) workshop in Washington, D.C. and serves as the point of depature for this paper. Here we present the main outcomes by describing and defining the use of ATS for ENMs as well as discussing its future role in environmental risk science. We conclude that diversity in testing should be encouraged to avoid...... chemicals are challenged. Nonetheless, standardized whole organism animal testing is still considered the gold standard for environmental risk assessment. Advancing risk analysis of engineered nanomaterials (ENMs) through ATS was discussed in September 2014 at an international Society for Risk Analysis (SRA...... be utilized to skip uncertain environmental extrapolations and give rise to more accurate risk analysis....

  10. 1986 environmental monitoring program report for the Idaho National Engineering Laboratory Site

    International Nuclear Information System (INIS)

    Hoff, D.L.; Chew, E.W.; Rope, S.K.

    1987-05-01

    This report presents onsite and offsite data collected in 1986 for the routine environmental monitoring program conducted by the Radiological and Environmental Sciences Laboratory (RESL) of the Department of Energy (DOE) at the Idaho National Engineering Laboratory (INEL) Site. The purpose of this routine program is to monitor radioactive and nonradioactive materials resulting from INEL Site operations which may reach the surrounding offsite environment and population. This report is prepared in accordance with the DOE requirements in draft DOE Order 5484.1 and is not intended to cover the numerous special environmental research programs being conducted at the INEL by RESL and others

  11. Evaporation Basin Test Reactor Area, Idaho National Engineering Laboratory: Environmental assessment

    International Nuclear Information System (INIS)

    1991-12-01

    The Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0501, on the construction and operation of the proposed Evaporation Basin at the Test Reactor Area (TRA) at the Idaho National Engineering Laboratory (INEL) near Idaho Falls, Idaho. Based on the analyses in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act (NEPA) of 1969. Therefore, the preparation of an environmental impact statement (EIS) is not required, and the Department is issuing this Finding of No Significant Impact

  12. SAGEEP '96: Proceedings of the symposium on the application of geophysics to engineering and environmental problems

    International Nuclear Information System (INIS)

    Bell, R.S.; Cramer, M.H.

    1996-01-01

    This document contains the Proceedings of the Symposium on the Application of Geophysics to Engineering and Environmental Problems which was held on April 28-May 2, 1996 in Keystone, Colorado, USA. Topics covered in the presentations include: Innovations in Electrical and Electromagnetic Methods, Near surface Seismic Applications, Environmental Aspects of Abandoned and Inactive Mines, Hydrogeology, The Search for Buried Objects, GPR Applications, Geotechnical Applications, Computer Applications and Advancements, Borehole and Tomographic Studies,Site Assessments, and Environmental Geophysics in Finland. Poster presentations also covered a variety of topics including electromagnetic mapping of karstic aquifers, mapping of mine subsidence, geophysical surveys of abandoned reactor sites, and several other applications of geophysics

  13. Challenges and Opportunities for Establishing Design as a Research Discipline in Civil and Environmental Engineering

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn

    2013-01-01

    There are a number of fields including architecture, industrial design, and urban planning and design, where design is the discipline upon which all research and teaching activities are based. In other fields such as aerospace and mechanical engineering, design is a sub-discipline with its own...... faculty, research and education communities, conferences, and journals. However, design remains an emerging sub-discipline in civil and environmental engineering – practiced, valued, and taught but not subject to rigorous academic research. This paper presents some of the challenges associated...... with the establishment of design as a research discipline within civil and environmental engineering, some of the benefits and opportunities that will come from that establishment, and some evidence for the fact that this process has already begun....

  14. Incorporating geoethics into environmental engineering lectures - three years of experience from international students visiting Iceland

    Science.gov (United States)

    Finger, David C.

    2017-04-01

    Never before has human kind been facing bigger environmental challenges than today. The challenges are overwhelming: growing human population, increasing ecological footprints, accelerated climate change, severe soil degradation, eutrophication of vital fresh water resources, acidification of oceans, health threatening air pollution and rapid biodiversity loss, to name just a few. It is the task of environmental scientists to transmit established knowledge on these complex and interdisciplinary challenges while demonstrating that management and engineering solutions exist to meet these threats. In this presentation I will outline the concept of my environmental impact (EI) assessment course, where prospective engineering students can select a topic of their choice, assess the environmental impacts, discuss with relevant stakeholders and come up with innovative solutions. The course is structured in three parts: i) lecturing of theoretical methods frequently used within the EI assessment process, ii) interaction with local businesses to acquire first-hand experience and iii) hands on training by writing an EI statement on a selected topic (see link below). Over the course of three years over 70 prospective engineering students from all over the world have not only acquired environmental system understanding, but also enhanced their awareness and developed potential solutions to mitigate, compensate and reverse the persistent environmental challenges. Most importantly, during this process all involved stakeholders (students, teachers, industry partners, governmental bodies and NGO partners) will hopefully develop a mutual understanding of the above mentioned environmental challenges and engage in an open and constructive dialogue necessary to generate acceptable solutions. Link to student projects from previous years: https://fingerd.jimdo.com/teaching/courses/environmental-impact-assessment/

  15. Establishment of first engineering specifications for environmental modification to eliminate schistosomiasis epidemic foci in urban areas.

    Science.gov (United States)

    Kong, Shibo; Tan, Xiaodong; Deng, Zhiqing; Xie, Yaofei; Yang, Fen; Zheng, Zengwang

    2017-08-01

    Snail control is a key link in schistosomiasis control, but no unified methods for eliminating snails have been produced to date. This study was conducted to explore an engineering method for eliminating Oncomelania hupensis applicable to urban areas. The engineering specifications were established using the Delphi method. An engineering project based on these specifications was conducted in Hankou marshland to eliminate snails, including the transformation of the beach surface and ditches. Molluscicide was used as a supplement. The snail control effect was evaluated by field investigation. The engineering results fulfilled the requirements of the design. The snail density decreased to 0/0.11m 2 , and the snail area dropped to 0m 2 after the project. There was a statistically significant difference in the number of frames with snails before and after the project (Pengineering specifications for environmental modification were successfully established. Environmental modification, mainly through beach and ditch remediation, can completely change the environment of Oncomelania breeding. This method of environmental modification combined with mollusciciding was highly effective at eliminating snails. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. A Critical Perspective of an Online Hands-On Laboratory Framework for Environmental Engineering Courses

    Directory of Open Access Journals (Sweden)

    Kiran Tota-Maharaj

    2012-07-01

    Full Text Available In environmental engineering education at the undergraduate and postgraduate levels, laboratory exercises are a key component for a holistic learning experience. This project gives an outlook of online learning related research and teaching linked to a lab-based learning environment. The advent of the internet and online resources such as weblogs as a major communication methodology in higher education has showed a great deal of interest. In this project a further step into the realm of providing an online support system for student’s access to remote and distributed laboratory facilities in water and environmental engineering modules has been conducted. The approach demonstrates the feasibility of using an online laboratory effectively which can enable learners to reinforce their learning through hands-on practicals and can also be carried out in a flexible environment. An online weblog related the research and interlinked teaching for water and environmental engineering modules which can be implemented in reforming a lecture-based course for students undertaking water and wastewater engineering subjects

  17. Determination and Applications of Environmental Costs at Different Sized Airports: Aircraft Noise and Engine Emissions

    Science.gov (United States)

    Lu, Cherie; Lierens, Abigail

    2003-01-01

    With the increasing trend of charging for externalities and the aim of encouraging the sustainable development of the air transport industry, there is a need to evaluate the social costs of these undesirable side effects, mainly aircraft noise and engine emissions, for different airports. The aircraft noise and engine emissions social costs are calculated in monetary terms for five different airports, ranging from hub airports to small regional airports. The number of residences within different levels of airport noise contours and the aircraft noise classifications are the main determinants for accessing aircraft noise social costs. Whist, based on the damages of different engine pollutants on the human health, vegetation, materials, aquatic ecosystem and climate, the aircraft engine emissions social costs vary from engine types to aircraft categories. The results indicate that the relationship appears to be curvilinear between environmental costs and the traffic volume of an airport. The results and methodology of environmental cost calculation could input for to the proposed European wide harmonized noise charges as well as the social cost benefit analysis of airports.

  18. Environmental education and socioresponsive engineering. Report of an educational initiative in Hyderabad, India.

    Science.gov (United States)

    Ansari, Ali Uddin; Jafari, Ashfaque; Mirzana, Ishrat Meera; Imtiaz, Zulfia; Lukacs, Heather

    2003-07-01

    A recent initiative at Muffakham Jah College of Engineering and Technology, Hyderabad, India, has resulted in setting up a program called Centre for Environment Studies and Socioresponsive Engineering which seeks to involve undergraduate students in studying and solving environmental problems in and around the city of Hyderabad, India. Two pilot projects have been undertaken--one focusing on design and construction of an eco-friendly house, The Natural House, and another directed at improving environmental and general living conditions in a slum area. The paper describes our attempts and experience of motivating our students to take interest in such projects. In an interesting development we invited a member of a student-faculty team at Massachusetts Institute of Technology (M.I.T.) that is doing a project in Nepal on safe drinking water. We report in our paper how the presentation by the guest from M.I.T. served as a catalyst for generating interest among civil and mechanical engineering students in our own projects. The paper includes contributions from one of our students and the M.I.T. staff member, reporting on their experiences related to the slum development project. We also discuss the Natural House project and its international and educational significance as a means of inculcating sensitivity and interest in nature among engineering students. We propose a pledge for engineers similar to the Hippocratic Oath for medical professionals.

  19. Environmental Science and Engineering Merit Badges: An Exploratory Case Study of a Non-Formal Science Education Program and the U.S. Scientific and Engineering Practices

    Science.gov (United States)

    Vick, Matthew E.; Garvey, Michael P.

    2016-01-01

    The Boy Scouts of America's Environmental Science and Engineering merit badges are two of their over 120 merit badges offered as a part of a non-formal educational program to U.S. boys. The Scientific and Engineering Practices of the U.S. Next Generation Science Standards provide a vision of science education that includes integrating eight…

  20. Environmental Engineering

    International Nuclear Information System (INIS)

    Kwon, Suk Pyo; Kim, Won Man; Ra, Sang Gi

    1986-02-01

    This book deals with water pollution and the measures, which indicates phenomenon of water pollution, properties of physical chemistry on pollution, measure of water quality and analysis, property of water, water supply and a source of water supply, water supply sewerage control and pump station, wastewater disposal treatment and process, and safety of water quality. It also deals with air pollution and measures, ocean pollution and the measures and noise pollution, vibration pollution waste pollution and industrial pollution.

  1. Alkali-activated binders/geopolymer and an application to environmental engineering

    Directory of Open Access Journals (Sweden)

    Nida Chaimoon

    2014-06-01

    Full Text Available For environmental reason, new binders that can be used as Portland cement replacement materials are being needed. Recently, alkali-activated binders (AAB and geopolymer have found increasing interest. As several research reports have showed that the two new binders are likely to have high potential to be developed and become an alternative to OPC. However, confusion in the classification of both binders is still there. This paper reviews knowledge about AAB and geopolymer including historical background, reaction mechanisms and reaction products. The similarities and differences of both binders are discussed. The application to environmental engineering on hazardous waste management using stabilization/solidification is also described.

  2. Consolidation of Environmental Planning, Bioenvironmental Engineering and Base Safety into a Single Resource Protection Organization.

    Science.gov (United States)

    1987-09-01

    DC: HQ USAF, 24 October 1975. 20. Department of the Air Force. Polluion Abatement and Environmental Qualit AFR 19-1. Washington DC: HQ USAF, 9 January...1 9Nh~93 CONSOLIDATION OF ENVIRONMENTAL PLANNING / *IOENVIRONMENTAL ENGINEERING AN..(U) AIR FORCE INST OF TECH URIGNT-PATTERSON AFD 0O4 SCHOOL OF...DEPARTMENT OF THE AIR FORCE AIR UNIVERSITY I AIR FORCE INSTITUTE OF TECHNOLOGY Wright-Patterson Air Force Base, Ohio T~~M h boomb appmŘu ton Iri.\\;.-C G

  3. A methodological approach of 'environmental engineering' for the rescue and protection of a territory

    International Nuclear Information System (INIS)

    Cautilli, F.; Polizzano, C.; Tassoni, E.; Zarlenga, F.

    1989-02-01

    In this report the methodological process, that should be followed when an environmental protection and restoration problem is dealt with, is described. Moreover the actions that 'the environmental engineer' has to carry out to study every multidisciplinary problem on territory protection and restoration are synthesized, keeping in mind that the territory knowledge and the geological hazard specification are the essential bases for research work. Finally, some typical territory protection actions against the hydrogeological failures, the quarry excavation activity and the hazardous waste disposal impact, are briefly described. (author)

  4. Source Release Modeling for the Idaho National Engineering and Environmental Laboratory's Subsurface Disposal Area

    International Nuclear Information System (INIS)

    Becker, B.H.

    2002-01-01

    A source release model was developed to determine the release of contaminants into the shallow subsurface, as part of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) evaluation at the Idaho National Engineering and Environmental Laboratory's (INEEL) Subsurface Disposal Area (SDA). The output of the source release model is used as input to the subsurface transport and biotic uptake models. The model allowed separating the waste into areas that match the actual disposal units. This allows quantitative evaluation of the relative contribution to the total risk and allows evaluation of selective remediation of the disposal units within the SDA

  5. Integrating the Concept of Sustainable Development into English Language Curriculum of Environmental Engineering Sciences

    Directory of Open Access Journals (Sweden)

    Rūta Petkutė

    2012-06-01

    Full Text Available The article attempts to present and discuss practical implementation of the objectives of the project Sustainable Living Environment carried out at the Faculty of Environmental Engineering of Vilnius Gediminas Technical University (VGTU. The project is a response to a commonly articulated and acknowledged need to infuse sustainable development principles into traditional curricula of all levels of education to pursue goals of sustainable development. Thus, the present study aims to take an account of the increasing role of Education for Sustainable Development (ESD in a globalized world and define how the implimentation of the ESD objectives changes teaching/learning patterns at a university of technology. Moreover, it offers an interdisciplinary curriculum scheme for teaching/learning English as a second language for Environmental Engineering as an efficient means to integrate principles of sustainable development into language classroom.

  6. The Role of Alternative Testing Strategies in Environmental Risk Assessment of Engineered Nanomaterials

    OpenAIRE

    Hjorth, Rune; Holden, Patricia; Hansen, Steffen Foss; Colman, Ben; Grieger, Khara; Hendren, Christine

    2017-01-01

    Within toxicology there is a pressure to find new test systems and organisms to replace, reduce and refine animal testing. In nanoecotoxicology the need for alternative testing strategies (ATS) is further emphasized as the validity of tests and risk assessment practices developed for dissolved chemicals are challenged. Nonetheless, standardized whole organism animal testing is still considered the gold standard for environmental risk assessment. Advancing risk analysis of engineered nanomater...

  7. Shrubs as ecosystem engineers across an environmental gradient: effects on species richness and exotic plant invasion.

    Science.gov (United States)

    Kleinhesselink, Andrew R; Magnoli, Susan M; Cushman, J Hall

    2014-08-01

    Ecosystem-engineering plants modify the physical environment and can increase species diversity and exotic species invasion. At the individual level, the effects of ecosystem engineers on other plants often become more positive in stressful environments. In this study, we investigated whether the community-level effects of ecosystem engineers also become stronger in more stressful environments. Using comparative and experimental approaches, we assessed the ability of a native shrub (Ericameria ericoides) to act as an ecosystem engineer across a stress gradient in a coastal dune in northern California, USA. We found increased coarse organic matter and lower wind speeds within shrub patches. Growth of a dominant invasive grass (Bromus diandrus) was facilitated both by aboveground shrub biomass and by growing in soil taken from shrub patches. Experimental removal of shrubs negatively affected species most associated with shrubs and positively affected species most often found outside of shrubs. Counter to the stress-gradient hypothesis, the effects of shrubs on the physical environment and individual plant growth did not increase across the established stress gradient at this site. At the community level, shrub patches increased beta diversity, and contained greater rarified richness and exotic plant cover than shrub-free patches. Shrub effects on rarified richness increased with environmental stress, but effects on exotic cover and beta diversity did not. Our study provides evidence for the community-level effects of shrubs as ecosystem engineers in this system, but shows that these effects do not necessarily become stronger in more stressful environments.

  8. The Barrett Foundation: Undergraduate Research Program for Environmental Engineers and Scientists

    Science.gov (United States)

    Rizzo, D. M.; Paul, M.; Farmer, C.; Larson, P.; Matt, J.; Sentoff, K.; Vazquez-Spickers, I.; Pearce, A. R.

    2007-12-01

    A new program sponsored by The Barrett Foundation in the University of Vermont College of Engineering and Mathematical Sciences (UVM) supports undergraduate students in Environmental Engineering, Earth and Environmental Sciences to pursue independent summer research projects. The Barrett Foundation, a non-profit organization started by a UVM Engineering alum, provided a grant to support undergraduate research. Students must work with at least two different faculty advisors to develop project ideas, then independently prepare a research proposal and submit it to a faculty panel for review. The program was structured as a scholarship to foster a competitive application process. In the last three years, fourteen students have participated in the program. The 2007 Barrett Scholars projects include: - Using bacteria to change the chemistry of subsurface media to encourage calcite precipitation for soil stability and pollutant sequestration - Assessing structural weaknesses in a historic post and beam barn using accelerometers and wireless data collection equipment - Using image processing filters to 1) evaluate leaf wetness, a leading indicator of disease in crops and 2) assess the movement of contaminants through building materials. - Investigating the impact of increased water temperature on cold-water fish species in two Vermont streams. - Studying the impacts of light duty vehicle tailpipe emissions on air quality This program supports applied and interdisciplinary environmental research and introduces students to real- world engineering problems. In addition, faculty from different research focuses are presented the opportunity to establish new collaborations around campus through the interdisciplinary projects. To date, there is a successful publication record from the projects involving the Barrett scholars, including students as authors. One of the objectives of this program was to provide prestigious, competitive awards to outstanding undergraduate engineers

  9. Genetically engineered microbial biosensors for in situ monitoring of environmental pollution.

    Science.gov (United States)

    Shin, Hae Ja

    2011-02-01

    Microbial biosensors are compact, portable, cost effective, and simple to use, making them seem eminently suitable for the in situ monitoring of environmental pollution. One promising approach for such applications is the fusion of reporter genes with regulatory genes that are dose-dependently responsive to the target chemicals or physiological signals. Their biosensor capabilities, such as target range and sensitivity, could be improved by modification of regulatory genes. Recent uses of such genetically engineered microbial biosensors include the development of portable biosensor kits and high-throughput cell arrays on chips, optic fibers, or other platforms for on-site and on-line monitoring of environmental pollution. This mini-review discusses recent advances in microbial biosensors and their future prospects, with a focus on the development and application of genetically modified microbial biosensors for in situ environmental monitoring.

  10. Idaho National Engineering Laboratory site environmental report for calendar year 1995

    International Nuclear Information System (INIS)

    Mitchell, R.G.; Peterson, D.; Hoff, D.L.

    1996-08-01

    This report presents a compilation of data collected in 1995 for the routine environmental surveillance programs conducted on and around the Idaho National Engineering Laboratory (INEL). During 1995, the offsite surveillance program was conducted by the Environmental Science and Research Foundation. Onsite surveillance was performed by Lockheed Idaho Technologies Company (LITCO). Ground-water monitoring, both on and offsite, was performed by the US Geological Survey (USGS). This report also presents summaries of facility effluent monitoring data collected by INEL contractors. This report, prepared in accordance with the requirements in DOE Order 5400.1, is not intended to cover the numerous special environmental research programs being conducted at the INEL by the Foundation, LITCO, USGS, and others

  11. TLD environmental monitoring at the Institute of Nuclear Engineering in Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Taam, I.H. [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Caixa Postal 68550, 21945-970 Rio de Janeiro, RJ (Brazil); Rosa, L.A.R. da [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Av. Salvador Allende s/n, Caixa Postal 37760, 22780-160 Rio de Janeiro, RJ (Brazil)], E-mail: lrosa@ird.gov.br; Crispim, V.R. [PEN/COPPE-DNC/POLI/CT/UFRJ, Caixa Postal 68509, 21941-972 Rio de Janeiro, RJ (Brazil)

    2008-09-15

    Since 2003 the Institute of Nuclear Engineering in Rio de Janeiro city, Brazil, operates a new cyclotron, RDS-111, to produce {sup 18}F-Fluorodeoxyglucose to be used in nuclear medicine. Additionally, the IEN radioactive waste repository has been enlarged during the past last years, receiving a considerable amount of radioactive materials. Therefore, it became necessary to evaluate a possible increase of the environmental gamma exposure rates at the institute site due to the operation of the new accelerator and the enlargement of the institute waste repository as well. LiF:Mg,Cu,P, TLD-100H, and TL detectors were employed for environmental kerma rate evaluation and the results were compared with previous results obtained before the RDS-111 operation initialisation and the enlargement of IEN waste repository. No significant contribution for the enhancement of environmental gamma kerma rates was detected.

  12. Idaho National Engineering Laboratory site environmental report for calendar year 1995

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, R.G.; Peterson, D.; Hoff, D.L.

    1996-08-01

    This report presents a compilation of data collected in 1995 for the routine environmental surveillance programs conducted on and around the Idaho National Engineering Laboratory (INEL). During 1995, the offsite surveillance program was conducted by the Environmental Science and Research Foundation. Onsite surveillance was performed by Lockheed Idaho Technologies Company (LITCO). Ground-water monitoring, both on and offsite, was performed by the US Geological Survey (USGS). This report also presents summaries of facility effluent monitoring data collected by INEL contractors. This report, prepared in accordance with the requirements in DOE Order 5400.1, is not intended to cover the numerous special environmental research programs being conducted at the INEL by the Foundation, LITCO, USGS, and others.

  13. Curricular Reform: Systems Modeling and Sustainability in Civil and Environmental Engineering at the University of Vermont

    Science.gov (United States)

    Rizzo, D. M.; Hayden, N. J.; Dewoolkar, M.; Neumann, M.; Lathem, S.

    2009-12-01

    Researchers at the University of Vermont were awarded a NSF-sponsored Department Level Reform (DLR) grant to incorporate a systems approach to engineering problem solving within the civil and environmental engineering programs. A systems approach challenges students to consider the environmental, social, and economic aspects within engineering solutions. Likewise, sustainability requires a holistic approach to problem solving that includes economic, social and environmental factors. Our reform has taken a multi-pronged approach in two main areas that include implementing: a) a sequence of three systems courses related to environmental and transportation systems that introduce systems thinking, sustainability, and systems analysis and modeling; and b) service-learning (SL) projects as a means of practicing the systems approach. Our SL projects are good examples of inquiry-based learning that allow students to emphasize research and learning in areas of most interest to them. The SL projects address real-world open-ended problems. Activities that enhance IT and soft skills for students are incorporated throughout the curricula. Likewise, sustainability has been a central piece of the reform. We present examples of sustainability in the SL and modeling projects within the systems courses (e.g., students have used STELLA™ systems modeling software to address the impact of different carbon sequestration strategies on global climate change). Sustainability in SL projects include mentoring home schooled children in biomimicry projects, developing ECHO exhibits and the design of green roofs, bioretention ponds and porous pavement solutions. Assessment includes formative and summative methods involving student surveys and focus groups, faculty interviews and observations, and evaluation of student work.

  14. Engineered nano materials and the U.S. Environmental Protection Agency: Research at the Western Ecology Division in Oregon, USA

    Science.gov (United States)

    Engineered nanoparticles represent a unique hazard to human health and the environment because their inherent characteristics differ significantly from commonly used chemicals and bulk forms of materials. The U.S. Environmental Protection Agency (EPA) is responsible for protecti...

  15. U.S. Army Corps of Engineers Environmental Review Guide for Operations (ERGO) Cycle I Assessment. Reports Analysis

    National Research Council Canada - National Science Library

    Mann, Diane

    1997-01-01

    The U.S. Army Corps of Engineers is pro-active in responsible environmental management of its operations, which include navigation locks, dams, hydroelectric power plants, dredges, campgrounds, marinas, oil...

  16. Carbon storage in the Mississippi River delta enhanced by environmental engineering

    Science.gov (United States)

    Shields, Michael R.; Bianchi, Thomas S.; Mohrig, David; Hutchings, Jack A.; Kenney, William F.; Kolker, Alexander S.; Curtis, Jason H.

    2017-11-01

    River deltas have contributed to atmospheric carbon regulation throughout Earth history, but functioning in the modern era has been impaired by reduced sediment loads, altered hydrologic regimes, increased global sea-level rise and accelerated subsidence. Delta restoration involves environmental engineering via river diversions, which utilize self-organizing processes to create prograding deltas. Here we analyse sediment cores from Wax Lake delta, a product of environmental engineering, to quantify the burial of organic carbon. We find that, despite relatively low concentrations of organic carbon measured in the cores (about 0.4%), the accumulation of about 3 T m-2 of sediment over the approximate 60 years of delta building resulted in the burial of a significant amount of organic carbon (16 kg m-2). This equates to an apparent organic carbon accumulation rate of 250 +/- 23 g m-2 yr-1, which implicitly includes losses by carbon emissions and erosion. Our estimated accumulation rate for Wax Lake delta is substantially greater than previous estimates based on the top metre of delta sediments and comparable to those of coastal mangrove and marsh habitats. The sedimentation of carbon at the Wax Lake delta demonstrates the capacity of engineered river diversions to enhance both coastal accretion and carbon burial.

  17. Engineering the Surface/Interface Structures of Titanium Dioxide Micro and Nano Architectures towards Environmental and Electrochemical Applications

    DEFF Research Database (Denmark)

    Wang, Xiaoliang; Zhao, Yanyan; Mølhave, Kristian

    2017-01-01

    advances in the surface and interface engineering and applications in environmental and electrochemical applications. We analyze the advantages of surface/interface engineered TiO₂ micro and nano structures, and present the principles and growth mechanisms of TiO₂ nanostructures via different strategies...

  18. EXTENSION OF COMPUTER-AIDED PROCESS ENGINEERING APPLICATIONS TO ENVIRONMENTAL LIFE CYCLE ASSESSMENT AND SUPPLY CHAIN MANAGEMENT

    Science.gov (United States)

    The potential of computer-aided process engineering (CAPE) tools to enable process engineers to improve the environmental performance of both their processes and across the life cycle (from cradle-to-grave) has long been proffered. However, this use of CAPE has not been fully ach...

  19. Introduction of Microbial Biopolymers in Soil Treatment for Future Environmentally-Friendly and Sustainable Geotechnical Engineering

    Directory of Open Access Journals (Sweden)

    Ilhan Chang

    2016-03-01

    Full Text Available Soil treatment and improvement is commonly performed in the field of geotechnical engineering. Methods and materials to achieve this such as soil stabilization and mixing with cementitious binders have been utilized in engineered soil applications since the beginning of human civilization. Demand for environment-friendly and sustainable alternatives is currently rising. Since cement, the most commonly applied and effective soil treatment material, is responsible for heavy greenhouse gas emissions, alternatives such as geosynthetics, chemical polymers, geopolymers, microbial induction, and biopolymers are being actively studied. This study provides an overall review of the recent applications of biopolymers in geotechnical engineering. Biopolymers are microbially induced polymers that are high-tensile, innocuous, and eco-friendly. Soil–biopolymer interactions and related soil strengthening mechanisms are discussed in the context of recent experimental and microscopic studies. In addition, the economic feasibility of biopolymer implementation in the field is analyzed in comparison to ordinary cement, from environmental perspectives. Findings from this study demonstrate that biopolymers have strong potential to replace cement as a soil treatment material within the context of environment-friendly construction and development. Moreover, continuing research is suggested to ensure performance in terms of practical implementation, reliability, and durability of in situ biopolymer applications for geotechnical engineering purposes.

  20. Use of genetically modified viruses and genetically engineered virus-vector vaccines: environmental effects.

    Science.gov (United States)

    Chan, Vivian S W

    2006-11-01

    Despite major therapeutic advances, infectious diseases remain highly problematic. Recent advancements in technology in producing DNA-based vaccines, together with the growing knowledge of the immune system, have provided new insights into the identification of the epitopes needed to target the development of highly targeted vaccines. Genetically modified (GM) viruses and genetically engineered virus-vector vaccines possess significant unpredictability and a number of inherent harmful potential hazards. For all these vaccines, safety assessment concerning unintended and unwanted side effects with regard to targeted vaccinees has always been the main focus. Important questions concerning effects on nontargeted individuals within the same species or other species remain unknown. Horizontal transfer of genes, though lacking supportive experimental or epidemiological investigations, is well established. New hybrid virus progenies resulting from genetic recombination between genetically engineered vaccine viruses and their naturally occurring relatives may possess totally unpredictable characteristics with regard to host preferences and disease-causing potentials. Furthermore, when genetically modified or engineered virus particles break down in the environment, their nuclei acids are released. Appropriate risk management is the key to minimizing any potential risks to humans and environment resulting from the use of these GM vaccines. There is inadequate knowledge to define either the probability of unintended events or the consequences of genetic modifications. The objective of this article is to highlight the limitations in environmental risk assessment and raise awareness of the potential risks involving the use of genetically modified viruses and genetically engineered virus-vector vaccines.

  1. Thermal efficiency and environmental performances of a biogas-diesel stationary engine.

    Science.gov (United States)

    Bilcan, A; Le Corre, O; Delebarre, A

    2003-09-01

    Municipal and agricultural waste, and sludge from wastewater treatment represent a large source of pollution. Gaseous fuels can be produced from waste decomposition and then used to run internal combustion engines for power and heat generation. The present paper focuses on thermal efficiency and environmental performances of dual-fuel engines fuelled with biogas. Experiments have been carried out on a Lister-Petter single cylinder diesel engine, modified for dual-fuel operation. Natural gas was first used as the primary fuel. An empirical correlation was determined to predict the engine load for a given mass flow rate for the pilot fuel (diesel) and for the primary fuel (natural gas). That correlation has then been tested for three synthesized biogas compositions. Computations were performed and the error was estimated to be less than 10%. Additionally, NOx and CO2 contents were measured from exhaust gases. Based on exhausts gas temperature, the activation energy and the pre-exponential factor of an Arrhenius law were then proposed, resulting in a simpler mean to predict NOx.

  2. Environmental engineering of navigation infrastructure: a survey of existing practices, challenges, and potential opportunities.

    Science.gov (United States)

    Fredette, Thomas J; Foran, Christy M; Brasfield, Sandra M; Suedel, Burton C

    2012-01-01

    Navigation infrastructure such as channels, jetties, river training structures, and lock-and-dam facilities are primary components of a safe and efficient water transportation system. Planning for such infrastructure has until recently involved efforts to minimize impacts on the environment through a standardized environmental assessment process. More recently, consistent with environmental sustainability concepts, planners have begun to consider how such projects can also be constructed with environmental enhancements. This study examined the existing institutional conditions within the US Army Corps of Engineers and cooperating federal agencies relative to incorporating environmental enhancements into navigation infrastructure projects. The study sought to (1) investigate institutional attitudes towards the environmental enhancement of navigation infrastructure (EENI) concept, (2) identify potential impediments to implementation and solutions to such impediments, (3) identify existing navigation projects designed with the express intent of enhancing environmental benefit in addition to the primary project purpose, (4) identify innovative ideas for increasing environmental benefits for navigation projects, (5) identify needs for additional technical information or research, and (6) identify laws, regulations, and policies that both support and hinder such design features. The principal investigation tool was an Internet-based survey with 53 questions. The survey captured a wide range of perspectives on the EENI concept including ideas, concerns, research needs, and relevant laws and policies. Study recommendations included further promotion of the concept of EENI to planners and designers, documentation of existing projects, initiation of pilot studies on some of the innovative ideas provided through the survey, and development of national goals and interagency agreements to facilitate implementation. Copyright © 2011 SETAC.

  3. Utilization of electromigration in civil and environmental engineering--processes, transport rates and matrix changes.

    Science.gov (United States)

    Ottosen, Lisbeth M; Christensen, Iben V; Rorig-Dalgård, Inge; Jensen, Pernille E; Hansen, Henrik K

    2008-07-01

    Electromigration (movement of ions in an applied electric field) is utilized for supply or extraction of ions from various porous materials within both civil and environmental engineering. In civil engineering, most research has been conducted on the removal of chlorides from concrete to hinder reinforcement corrosion while in environmental engineering remediation of heavy metal polluted soil is the issue most studied. Never the less, experiments have been conducted with utilization for several other materials and purposes within both engineering fields. Even though there are many topics of common interest in the use of electromigration for the two fields, there is no tradition for collaboration. The present paper is a review with the aim of pointing out areas of shared interest. Focus is laid on the purposes of the different processes, transport rates of various ions in different materials and on changes in the matrix itself. Desorption and dissolution of the target elements into ionic form is a key issue to most of the processes, and can be the limiting step. The removal rate is generally below 1 cm day(- 1), but it can be much less than 1 mm day(- 1) when desorption is slow and insufficient. Matrix changes occurs under the action of the applied electric field and it includes both physico-chemical and hydrological changes. Some of the solid phases is weathered and new can be formed. Increased fundamental understanding of the effects and side effects, when applying the electric field to a porous material, can lead to improvement of the known technologies and possibly to new applications.

  4. A Challenge to Environmental Making for Positively and Continuous Learning in Engineering Design Education

    Science.gov (United States)

    Yasuno, Takashi; Kamano, Takuya

    This paper describes specific examples of environmental making for positively and continuous learning in design subject which are called the “Project Exercise” at Department of Electrical and Electronic Engineering of The University of Tokushima. The purpose of the design subject is training of not only creativity but also information processing, problem solving, group working and presentations. The feature of the Project Exercise is to link with the robot contest. As a result, the training of the motive of the own learning and a continuous study habit is executed. The education effect is discussed from the execution example, the student questionnaire, and the comment form in 2004.

  5. Fate, behaviour and toxicity of engineered nanomaterials in the environmental systems

    CSIR Research Space (South Africa)

    Musee, N

    2012-04-01

    Full Text Available to sewage sludge ? Uncoated SiO2NPs will continue through the effluent stream (likely to go to secondary treatment stages) 3.0 RESULTS ? CSIR 2011 Slide 5 0 10 20 30 40 50 60 70 80 90 100 0 4 8 12 16 20 24 28 32 36 40 2 3 4 5..., and toxicity of engineered nanomaterials in the environmental systems Ndeke Musee Nanotech Environ Impacts Res Group, NRE nmusee@csir.co.za University of Free State, South Africa, 1st ? 4th April, 2012: NanoAfrica2012 Some questions: risk concerns...

  6. Studies on Experimental Ontology and Knowledge Service Development in Bio-Environmental Engineering

    Science.gov (United States)

    Zhang, Yunliang

    2018-01-01

    The existing domain-related ontology and information service patterns are analyzed, and the main problems faced by the experimental scheme knowledge service were clarified. The ontology framework model for knowledge service of Bio-environmental Engineering was proposed from the aspects of experimental materials, experimental conditions and experimental instruments, and this ontology will be combined with existing knowledge organization systems to organize scientific and technological literatures, data and experimental schemes. With the similarity and priority calculation, it can improve the related domain research.

  7. The Idaho National Engineering Laboratory Site environmental report for calendar year 1988

    International Nuclear Information System (INIS)

    Hoff, D.L.; Mitchell, R.G.; Moore, R.

    1989-06-01

    This report describes the monitoring program, the collection of foodstuffs at the Idaho National Engineering Laboratory (INEL) boundary and distant offsite locations, and the collection of air and water samples at Site locations and offsite boundary and distant locations. The report also compares and evaluates the samples results, discussing implications, if any. Significant environmental activities at the INEL Site during 1988, nonradioactive and radioactive effluent monitoring at the Site, and the US Geological Survey (USGS) ground-water monitoring program are also summarized. 42 refs., 15 figs., 12 tabs

  8. 1995 annual epidemiologic surveillance report for Idaho National Engineering and Environmental Laboratory

    International Nuclear Information System (INIS)

    1995-01-01

    The US Department of Energy's (DOE) conduct of epidemiologic surveillance provides an early warning system for health problems among workers. This program monitors illnesses and health conditions that result in an absence of five or more consecutive workdays, occupational injuries and illnesses, and disabilities and deaths among current workers. This report summarizes epidemiologic surveillance data collected from the Idaho National Engineering and Environmental Laboratory (INEEL) from January 1, 1995 through December 31, 1995. The data were collected by a coordinator at INEEL and submitted to the Epidemiologic Surveillance Data Center, located at Oak Ridge Institute for Science and Education, where quality control procedures and data analyses were carried out

  9. 1995 annual epidemiologic surveillance report for Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The US Department of Energy's (DOE) conduct of epidemiologic surveillance provides an early warning system for health problems among workers. This program monitors illnesses and health conditions that result in an absence of five or more consecutive workdays, occupational injuries and illnesses, and disabilities and deaths among current workers. This report summarizes epidemiologic surveillance data collected from the Idaho National Engineering and Environmental Laboratory (INEEL) from January 1, 1995 through December 31, 1995. The data were collected by a coordinator at INEEL and submitted to the Epidemiologic Surveillance Data Center, located at Oak Ridge Institute for Science and Education, where quality control procedures and data analyses were carried out.

  10. Applied chemistry and environmental engineering for engineers. Manual for students and practicians. 2. ed.; Angewandte Chemie und Umwelttechnik fuer Ingenieure. Handbuch fuer Studium und betriebliche Praxis

    Energy Technology Data Exchange (ETDEWEB)

    Fessmann, J.; Orth, H.

    2002-07-01

    This is a practically oriented textbook for chemistry and environmental protection training of students of mechanical engineering, vehicle engineering, electrical engineering, space HVAc engineering etc. Students are also given useful information on the practical applications of chemistry and on environmental protection in industrial practice. The book also contains problem solutions for managing engineers in organizations of the metal and electrical branch who are confronted with chemical problems in chemical engineering, quality assurance, industrial safety and environmental protection. [German] Das Handbuch vermittelt in konzentrierter Form die Grundlagen der Chemie und Umwelttechnik und schlaegt rasch die Bruecke zur industriellen Anwendung bevorzugt in der Metall- und Elektroindustrie. Das Handbuch ist ein praxisorientiertes Lehrbuch fuer die Chemie- und Umweltschutzausbildung von Ingenieurstudenten der Fachrichtungen Maschinenbau, Fahrzeugtechnik, Elektrotechnik, Versorgungstechnik u.a. Darueberhinaus finden Schueler von Chemieleistungskursen an Gymnasien oder Chemiestudenten an Fachhochschulen oder Universitaeten viele nuetzliche Informationen ueber die Anwendungen von Chemie und Umweltschutz in der industriellen Praxis. Nicht zuletzt enthaelt das Buch Problemloesungen fuer Betriebsingenieure, insbesondere aus dem Bereich der Metall- und Elektrobranche, die mit chemischen Fragestellungen in der Verfahrenstechnik, Qualitaetssicherung oder Arbeits-/Umweltschutzueberwachung konfrontiert sind. (orig.)

  11. 2002 Wastewater Land Application Site Performance Reports for the Idaho National Engineering and Environmental Laboratory and Associated Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Meachum, Teresa Ray; Michael G. Lewis

    2003-02-01

    The 2002 Wastewater Land Application site Performance Reports for the Idaho National Engineering and Environmental Laboratory describe site conditions for the facilities with State of Idaho Wastewater Land Application Permits. Permit-required monitoring data are summarized, and permit exceedences or environmental impacts relating to the operation of the facilities during the 2002 permit year are discussed.

  12. Building an integrated nuclear engineering and nuclear science human resources pipeline at the Idaho National Engineering and Environmental Laboratory

    International Nuclear Information System (INIS)

    Sneed, A.; Sikorski, B.; Lineberry, M.; Jolly, J.

    2004-01-01

    In a joint effort with the Argonne National Laboratory - West (ANL-W), the Idaho National Engineering and Environmental Laboratory (INEEL) has assumed the lead role for nuclear energy reactor research for the United States Government. In 2005, these two laboratories will be combined into one entity, the Idaho National Laboratory (INL). There are two objectives for the INL: (1) to act as the lead systems integrator for the Department of Energy's Office of Nuclear Energy Science and Technology and, (2) to establish a Center for Advanced Energy Studies. Focusing on the Center for Advanced Energy Studies, this paper presents a Human Resources Pipeline Model outlining a nuclear educational pathway that leads to university and industry research partnerships. The pathway progresses from education to employment and into retirement. Key to the model is research and mentoring and their impact upon each stage. The Center's success will be the result of effective and advanced communications, faculty/student involvement, industry support, inclusive broadbased involvement, effective long-term partnering, and increased federal and state support. (author)

  13. The Idaho National Engineering Laboratory Site Environmental Report for Calendar Year 1993

    International Nuclear Information System (INIS)

    Mitchell, R.G.

    1994-07-01

    Results of the various environmental monitoring programs for 1993 are presented from the Idaho National Engineering Laboratory (INEL) operations. Although some radioactive materials were discharged during Site operations, concentrations and doses to the surrounding population were of no health consequence and were far less than State of Idaho and Federal health protection guidelines. Chapter 2 summarizes INEL activities related to compliance with environmental regulations and laws for Calendar Year 1993. The major portion of the report summarizes results of the environmental surveillance program conducted by the DOE Radiological and Environmental Sciences Laboratory, which includes the collection of foodstuffs at the INEL boundary and distant offsite locations, and the collection of air and water samples at onsite locations and offsite boundary and distant locations. The report also compares and evaluates the sample results to appropriate federal regulations and standards and discusses implications, if any. The US Geological Survey (USGS) ground-water monitoring program is briefly summarized and data are included in maps showing the spread of contaminants. Effluent monitoring and nonradiological drinking water monitoring are discussed briefly and data are summarized

  14. The Idaho National Engineering Laboratory site environmental report for calendar year 1989

    International Nuclear Information System (INIS)

    Hoff, D.L.; Mitchell, R.G.; Bowman, G.C.; Moore, R.

    1990-06-01

    To verify that exposures resulting from operations at the Department of Energy (DOE) nuclear facilities have remained very small, each site at which nuclear activities are underway operates an environmental surveillance program to monitor the air, water and any other pathway where radionuclides from operations might conceivably reach workers or members of the public. This report presents data collected in 1989 for the routine environmental surveillance program conducted by the Radiological and Environmental Sciences Laboratory (RESL) of DOE and the US Geological Survey (USGS) at the Idaho National Engineering Laboratory (INEL) site. The environmental surveillance program for the INEL and vicinity for 1989 included the collection and analysis of samples from potential exposure pathways. Three basic groups of samples were collected. Those collected within the INEL boundaries will be referred to as onsite samples. Samples collected outside, but near, the Site boundaries will be referred to as boundary samples or part of a group of offsite samples. Samples collected from locations considerably beyond the Site boundaries will be referred to as distant samples or part of the offsite group. With the exception of Craters of the Moon National Monument, the distant locations are sufficiently remote from the Site to ensure that detectable radioactivity is primarily due to natural background sources or sources other than INEL operations. 35 refs., 14 figs., 13 tabs

  15. Expansion of the Idaho National Engineering Laboratory Research Center: Environmental assessment

    International Nuclear Information System (INIS)

    1994-03-01

    The US Department of Energy (DOE) proposes to expand and upgrade facilities at the Idaho National Engineering Laboratory (INEL) Research Center (IRC) by constructing a research laboratory addition on the northeast corner of existing laboratory building; upgrading the fume hood system in the existing laboratory building; and constructing a hazardous waste handling facility and a chemical storage building. The DOE also proposes to expand the capabilities of biotechnology research programs by increasing use of radiolabeled compounds to levels in excess of current facility limits for three radionuclides (carbon-14, sulfur-35, and phosphorus-32). This Environmental assessment identifies the need for the new facilities, describes the proposed projects and environmental setting, and evaluates the potential environmental effects. Impacts associated with current operation are discussed and established as a baseline. Impacts associated with the proposed action and cumulative impacts are described against this background. Alternatives to the proposed action (No action; Locating proposed facilities at a different site) are discussed and a list of applicable regulations is provided. The no action alternative is continuation of existing operations at existing levels as described in Section 4 of this EA. Proposed facilities could be constructed at a different location, but these facilities would not be useful or practical since they are needed to provide a support function for IRC operations. Further, the potential environmental impacts would not be reduced if a different site was selected

  16. Addressing the complexity of water chemistry in environmental fate modeling for engineered nanoparticles.

    Science.gov (United States)

    Sani-Kast, Nicole; Scheringer, Martin; Slomberg, Danielle; Labille, Jérôme; Praetorius, Antonia; Ollivier, Patrick; Hungerbühler, Konrad

    2015-12-01

    Engineered nanoparticle (ENP) fate models developed to date - aimed at predicting ENP concentration in the aqueous environment - have limited applicability because they employ constant environmental conditions along the modeled system or a highly specific environmental representation; both approaches do not show the effects of spatial and/or temporal variability. To address this conceptual gap, we developed a novel modeling strategy that: 1) incorporates spatial variability in environmental conditions in an existing ENP fate model; and 2) analyzes the effect of a wide range of randomly sampled environmental conditions (representing variations in water chemistry). This approach was employed to investigate the transport of nano-TiO2 in the Lower Rhône River (France) under numerous sets of environmental conditions. The predicted spatial concentration profiles of nano-TiO2 were then grouped according to their similarity by using cluster analysis. The analysis resulted in a small number of clusters representing groups of spatial concentration profiles. All clusters show nano-TiO2 accumulation in the sediment layer, supporting results from previous studies. Analysis of the characteristic features of each cluster demonstrated a strong association between the water conditions in regions close to the ENP emission source and the cluster membership of the corresponding spatial concentration profiles. In particular, water compositions favoring heteroaggregation between the ENPs and suspended particulate matter resulted in clusters of low variability. These conditions are, therefore, reliable predictors of the eventual fate of the modeled ENPs. The conclusions from this study are also valid for ENP fate in other large river systems. Our results, therefore, shift the focus of future modeling and experimental research of ENP environmental fate to the water characteristic in regions near the expected ENP emission sources. Under conditions favoring heteroaggregation in these

  17. A case study of an environmental assessment combining historical practices and subsurface utility engineering

    International Nuclear Information System (INIS)

    Dodge, L.J.; Anspach, J.H.

    1995-01-01

    Permit requirements for a new cogeneration facility in Bayonne, New Jersey included an environmental assessment. The site is currently occupied by a metal products distribution plant and a second parcel currently used as a paved parking lot. Historical records show that the site was progressively filled and that prior activities included a variety of light industrial and commercial operations, including a boat yard and marina. Due to these facilities and an adjacent food processing plant, there are a multitude of underground utilities throughout the area. Large-scale excavation or limited indiscriminate test borings were determined to be the extremes of possible environmental data collection techniques. Surface geophysics for anomaly detection and subsequent exposure of the anomalies, combined with baseline data obtained through several soil borings was considered a good compromise. Existing utilities greatly affect the interpretation of surface geophysics due to a utility's material, depth, trench backfill, and other characteristics. Therefore, subsurface utility engineering techniques were used as part of the environmental site assessment to fully identify, characterize, and map all existing utilities with a high degree of accuracy. A site-wide geophysical survey was then conducted as part of the environmental site investigation. A total of 37 significant anomalies were documented. Investigation of the anomalies proved all but several to be innocuous in nature and a result of the differing fill composition as fill was used for site development through the years. Based on the site-wide environmental characterization as supplemented by the geophysical survey, the environmental permit was approved on first submittal

  18. In summary: Idaho National Engineering Laboratory site environmental report for calendar year 1995

    International Nuclear Information System (INIS)

    Roush, D.; Mitchell, R.G.; Peterson, D.

    1996-08-01

    Every human is exposed to natural radiation. This exposure comes from many sources, including cosmic radiation from outer space, naturally-occurring radon, and radioactivity from substances in our bodies. In addition to natural sources of radiation, humans can also be exposed to man-made sources of radiation. Examples of man-made sources include nuclear medicine, X-rays, nuclear weapons testing, and accidents at nuclear power plants. The Idaho National Engineering Laboratory (INEL) is a U.S. Department of Energy (DOE) research facility that deals, in part, with studying nuclear reactors and storing radioactive materials. Careful handling and rigorous procedures do not completely eliminate the risk of releasing radioactivity. So, there is a remote possibility for a member of the public near the INEL to be exposed to radioactivity from the INEL. Extensive monitoring of the environment takes place on and around the INEL. These programs search for radionuclides and other contaminants. The results of these programs are presented each year in a site environmental report. This document summarizes the Idaho National Engineering Laboratory Site Environmental Report for Calendar Year 1995

  19. Integrating Social Science, Environmental Science, and Engineering to Understand Vulnerability and Resilience to Environmental Hazards in the Bengal Delta

    Science.gov (United States)

    Gilligan, J. M.; Ackerly, B.; Goodbred, S. L.

    2013-12-01

    In populated delta environments, it is impossible to separate human and natural systems. Human activities change the landscape by altering the dynamics of water and sediment and in return, humans themselves are affected by the natural and anthropogenic changes to the landscape. Such interactions can also have significant impacts on the ecology and natural resources of a delta system, affecting local and regional food supply, livelihoods, and economies, particularly in developing nations. Successful adaptation to environmental change in a strongly coupled human-natural system, such as the Bengal delta, requires understanding how the physical environment and the changing social, political, and economic conditions of people's lives interact. Research on human-delta interactions has largely focused on macro-scale effects from major dams, water diversions, and catchment-scale land use; but at the smaller scale of households and communities, decisions, actions, and outcomes may occur abruptly and have significant local impacts (positive or negative). Southwest Bangladesh experiences profound environmental problems at the local human-landscape interface, including groundwater salinity, soil fertility, conflicting land-use practices, management of engineering structures, and declining land-surface elevations. The impacts of climate-induced sea-level rise, especially with respect to population migration, receive great attention and concern, but neither sea level rise nor migration occurs against a background of static physical or human environments. For example, changing land use (e.g., building embankments, which affect drainage, sediment transport, and the evolution of tidal channels; and the transformation of rice fields to shrimp aquaculture, which affects soil chemistry, labor markets, river ecology, and possibly the integrity of embankments) can significantly change the impact that sea level rise will have on flood hazards and the resulting effect on people living on

  20. Mitigating Climate Change at the Carbon Water Nexus: A Call to Action for the Environmental Engineering Community.

    Science.gov (United States)

    Clarens, Andres F; Peters, Catherine A

    2016-10-01

    Environmental engineers have played a critical role in improving human and ecosystem health over the past several decades. These contributions have focused on providing clean water and air as well as managing waste streams and remediating polluted sites. As environmental problems have become more global in scale and more deeply entrenched in sociotechnical systems, the discipline of environmental engineering must grow to be ready to respond to the challenges of the coming decades. Here we make the case that environmental engineers should play a leadership role in the development of climate change mitigation technologies at the carbon-water nexus (CWN). Climate change, driven largely by unfettered emissions of fossil carbon into the atmosphere, is a far-reaching and enormously complex environmental risk with the potential to negatively affect food security, human health, infrastructure, and other systems. Solving this problem will require a massive mobilization of existing and innovative new technology. The environmental engineering community is uniquely positioned to do pioneering work at the CWN using a skillset that has been honed, solving related problems. The focus of this special issue, on "The science and innovation of emerging subsurface energy technologies," provides one example domain within which environmental engineers and related disciplines are beginning to make important contributions at the CWN. In this article, we define the CWN and describe how environmental engineers can bring their considerable expertise to bear in this area. Then we review some of the topics that appear in this special issue, for example, mitigating the impacts of hydraulic fracturing and geologic carbon storage, and we provide perspective on emergent research directions, for example, enhanced geothermal energy, energy storage in sedimentary formations, and others.

  1. Impairments of cells and genomic DNA by environmentally transformed engineered nanomaterials

    Science.gov (United States)

    Jones, Philip; Sugino, Sakiko; Yamamura, Shohei; Lacy, Fred; Biju, Vasudevanpillai

    2013-09-01

    Enormous increase in the production of nanomaterials and their growing applications in the device technology, biotechnology and biomedical areas suggest the need for developing models for predicting the environmental health and safety (EHS) risks posed by such nanomaterials. We hypothesize that CdSe quantum dots (QDs) and ZnO nanoparticles (NPs) encompassed in liposomes or not and transformed by simulated solar UV light can be model systems for studying the environmental toxicity of engineered nanomaterials. In this study, human lung epithelial adenocarcinoma cells (H1650) are exposed to photoirradiated CdSe QDs or ZnO nanopowder included or not in liposomes. The release of cadmium and zinc ions from the nanomaterials exposed to solar simulated UV radiation is detected and quantified by measuring the steady-state and time resolved fluorescence of the metal ion sensor tetracarboxyphenylporphyrin (TCPP) or the commercial Measure iT Pd/Cd sensor. Viability of cells treated with nanomaterials exposed to solar simulated UV radiation for different durations is measured by MTT assay. Enhanced etching of the nanoparticles exposed to solar simulated UV radiation results in the release of toxic levels of heavy metal ions, which considerably lower the viability of H1650 cells is due to the deactivation of DNA repair enzymes as evidenced by the pinching off of nuclear DNA in comet assays and DNA samples in electrophoresis. Results from this study highlight the need to obtain not only quantitative information about the environmental risks posed by engineered nanomaterials but also environment friendly nanomaterials for practical applications.Enormous increase in the production of nanomaterials and their growing applications in the device technology, biotechnology and biomedical areas suggest the need for developing models for predicting the environmental health and safety (EHS) risks posed by such nanomaterials. We hypothesize that CdSe quantum dots (QDs) and ZnO nanoparticles

  2. Off-road compression-ignition engine emission regulations under the Canadian Environmental Protection Act 1999 : guidance document

    International Nuclear Information System (INIS)

    2006-03-01

    This guide explained the requirements for Off-Road Compression Ignition Engine Emission Regulations established under the Canadian Environmental Protection Act. The regulations are enforced by Environment Canada, which authorizes and monitors the use of the national emissions mark. The regulations prescribe standards for off-road engines that operate as reciprocating, internal combustion engines, other than those that operate under characteristics similar to the Otto combustion cycle and that use a spark plug or other sparking device. The regulations apply to engines that are typically diesel-fuelled and found in construction, mining, farming and forestry machines such as tractors, excavators and log skidders. Four different types of persons are potentially affected by the regulations: Canadian engine manufacturers; distributors of Canadian engines or machines containing Canadian engines; importers of engines or machines for the purpose of sale; and persons not in companies importing engines or machines. Details of emission standards were presented, as well as issues concerning evidence of conformity, importing engines, and special engine cases. Compliance and enforcement details were reviewed, as well as applicable standards and provisions for emission control systems and defeat devices; exhaust emissions; crankcase and smoke emissions; and adjustable parameters. Details of import declarations were reviewed, as well as issues concerning defects and maintenance instructions. 4 tabs., 4 figs

  3. Integrated Hydrologic Science and Environmental Engineering Observatory: CLEANER's Vision for the WATERS Network

    Science.gov (United States)

    Montgomery, J. L.; Minsker, B. S.; Schnoor, J.; Haas, C.; Bonner, J.; Driscoll, C.; Eschenbach, E.; Finholt, T.; Glass, J.; Harmon, T.; Johnson, J.; Krupnik, A.; Reible, D.; Sanderson, A.; Small, M.; van Briesen, J.

    2006-05-01

    With increasing population and urban development, societies grow more and more concerned over balancing the need to maintain adequate water supplies with that of ensuring the quality of surface and groundwater resources. For example, multiple stressors such as overfishing, runoff of nutrients from agricultural fields and confined animal feeding lots, and pathogens in urban stormwater can often overwhelm a single water body. Mitigating just one of these problems often depends on understanding how it relates to others and how stressors can vary in temporal and spatial scales. Researchers are now in a position to answer questions about multiscale, spatiotemporally distributed hydrologic and environmental phenomena through the use of remote and embedded networked sensing technologies. It is now possible for data streaming from sensor networks to be integrated by a rich cyberinfrastructure encompassing the innovative computing, visualization, and information archiving strategies needed to cope with the anticipated onslaught of data, and to turn that data around in the form of real-time water quantity and quality forecasting. Recognizing this potential, NSF awarded $2 million to a coalition of 12 institutions in July 2005 to establish the CLEANER Project Office (Collaborative Large-Scale Engineering Analysis Network for Environmental Research; http://cleaner.ncsa.uiuc.edu). Over the next two years the project office, in coordination with CUAHSI (Consortium of Universities for the Advancement of Hydrologic Science, Inc.; http://www.cuahsi.org), will work together to develop a plan for a WATer and Environmental Research Systems Network (WATERS Network), which is envisioned to be a collaborative scientific exploration and engineering analysis network, using high performance tools and infrastructure, to transform our scientific understanding of how water quantity, quality, and related earth system processes are affected by natural and human-induced changes to the environment

  4. Real-Time Environmental Monitoring at the Japan Nuclear Cycle Develoment Institute Oarai Engineering Center Using the Internet to Promote Safety and Environmental Transparency

    OpenAIRE

    Sheila E.Motomat; 中島 尚子

    2000-01-01

    The report documents the results of an effort at the Japan Nuclear Cycle Development Institute O-arai Engineering Center (JNC/OEC) to provide via the Internet, in real-time, environmental monitoring data to promote safety and environmental transparency. Provided in Japanese as well as in English, the Internet site provides assurance that OEC nuclear operations are being conducted in a manner that is safe to both people in the surrounding area and the environment. This work conducted by Enviro...

  5. Nanoparticle analysis and characterization methodologies in environmental risk assessment of engineered nanoparticles.

    Science.gov (United States)

    Hassellöv, Martin; Readman, James W; Ranville, James F; Tiede, Karen

    2008-07-01

    Environmental risk assessments of engineered nanoparticles require thorough characterization of nanoparticles and their aggregates. Furthermore, quantitative analytical methods are required to determine environmental concentrations and enable both effect and exposure assessments. Many methods still need optimization and development, especially for new types of nanoparticles in water, but extensive experience can be gained from the fields of environmental chemistry of natural nanomaterials and from fundamental colloid chemistry. This review briefly describes most methods that are being exploited in nanoecotoxicology for analysis and characterization of nanomaterials. Methodological aspects are discussed in relation to the fields of nanometrology, particle size analysis and analytical chemistry. Differences in both the type of size measures (length, radius, aspect ratio, etc.), and the type of average or distributions afforded by the specific measures are compared. The strengths of single particle methods, such as electron microscopy and atomic force microscopy, with respect to imaging, shape determinations and application to particle process studies are discussed, together with their limitations in terms of counting statistics and sample preparation. Methods based on the measurement of particle populations are discussed in terms of their quantitative analyses, but the necessity of knowing their limitations in size range and concentration range is also considered. The advantage of combining complementary methods is highlighted.

  6. Idaho National Engineering and Environmental Laboratory institutional plan -- FY 2000--2004

    Energy Technology Data Exchange (ETDEWEB)

    Enge, R.S.

    1999-12-01

    In this first institutional plan prepared by Bechtel BWXT Idaho, LLC, for the Idaho National Engineering and Environmental Laboratory, the INEEL will focus its efforts on three strategic thrusts: (1) Environmental Management stewardship for DOE-EM, (2) Nuclear reactor technology for DOE-Nuclear Energy (NE), and (3) Energy R and D, demonstration, and deployment (initial focus on biofuels and chemicals from biomass). The first strategic thrust focuses on meeting DOE-EMs environmental cleanup and long-term stewardship needs in a manner that is safe, cost-effective, science-based, and approved by key stakeholders. The science base at the INEEL will be further used to address a grand challenge for the INEEL and the DOE complex--the development of a fundamental scientific understanding of the migration of subsurface contaminants. The second strategic thrust is directed at DOE-NEs needs for safe, economical, waste-minimized, and proliferation-resistant nuclear technologies. As NE lead laboratories, the INEEL and ANL will pursue specific priorities. The third strategic thrust focuses on DOE's needs for clean, efficient, and renewable energy technology. As an initial effort, the INEEL will enhance its capability in biofuels, bioprocessing, and biochemicals. The content of this institutional plan is designed to meet basic DOE requirements for content and structure and reflect the key INEEL strategic thrusts. Updates to this institutional plan will offer additional content and resource refinements.

  7. Enhancement of uranium-accumulating ability of microorganisms by irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Sakaguchi, Takashi; Nakajima, Akira; Tsuruta, Takehiko [Miyazaki Medical Coll., Kiyotake (Japan)

    1998-01-01

    Some microorganisms having excellent ability to accumulate uranium were isolated, from soil and water systems in and around the Ningyo-toge Station of Power Reactor and Nuclear Fuel Development Corporation. The enhancement of uranium-accumulating ability of microorganisms by electron-beam irradiation was examined, and the ability of JW-046 was increased 3-5% by the irradiation. The irradiation affect the growth of some of microorganisms tested. (author)

  8. Pre-engineering Spaceflight Validation of Environmental Models and the 2005 HZETRN Simulation Code

    Science.gov (United States)

    Nealy, John E.; Cucinotta, Francis A.; Wilson, John W.; Badavi, Francis F.; Dachev, Ts. P.; Tomov, B. T.; Walker, Steven A.; DeAngelis, Giovanni; Blattnig, Steve R.; Atwell, William

    2006-01-01

    The HZETRN code has been identified by NASA for engineering design in the next phase of space exploration highlighting a return to the Moon in preparation for a Mars mission. In response, a new series of algorithms beginning with 2005 HZETRN, will be issued by correcting some prior limitations and improving control of propagated errors along with established code verification processes. Code validation processes will use new/improved low Earth orbit (LEO) environmental models with a recently improved International Space Station (ISS) shield model to validate computational models and procedures using measured data aboard ISS. These validated models will provide a basis for flight-testing the designs of future space vehicles and systems of the Constellation program in the LEO environment.

  9. The Role of Chemistry in the AgroEnvironmental Engineering Degree

    Science.gov (United States)

    Cartagena, M. Carmen; Tarquis, A. M.; Arce, Augusto

    2010-05-01

    The basic sciences in general and chemistry in particular play an important role in the training of students in the new degree of Agro-Environmental Engineering. A redefinition of the objectives at higher education, which is the process of European Convergence, implies a profound change in the approach to the traditional teaching. The schema change: teaching content, matter is the centre and technical training to teach to learn, the student is the centre and to comprehensive training, assumes that students should acquire not only the specific knowledge of its specialty, but also numerous capabilities and skills. This work is a study of the various subjects based in chemistry, their contents, teaching methodologies, specific and transversal competences that provide and interrelationships with other subjects of this degree.

  10. Cleaning and Decontamination Using Strippable and Protective Coatings at the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    J. Tripp; K. Archibald; L. Lauerhass; M. Argyle; R. Demmer

    1999-03-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) Radioactive Liquid Waste Reduction (RLWR) group is conducting a testing and evaluation program on strippable and protective coatings. The purpose of the program is to determine how and where these coatings can be used to aid in the minimization of liquid waste generation. These coatings have become more important in daily operations because of the increased concern of secondary liquid waste generation at the INEEL. Several different strippable and protective coatings were investigated by the RLWR group, including Pentek 604, Bartlett (TLC), and ALARA 1146. During the tests quantitative data was determined, such as effectiveness at reducing contamination levels, or costs, as well as some qualitative data on issues like ease of application or removal. PENTEK 604 and Bartlett TLC are seen as superior products with slightly different uses.

  11. Airborne monitoring to distinguish engineered nanomaterials from incidental particles for environmental health and safety.

    Science.gov (United States)

    Peters, Thomas M; Elzey, Sherrie; Johnson, Ronald; Park, Heaweon; Grassian, Vicki H; Maher, Tabitha; O'Shaughnessy, Patrick

    2009-02-01

    Two methods were used to distinguish airborne engineered nanomaterials from other airborne particles in a facility that produces nano-structured lithium titanate metal oxide powder. The first method involved off-line analysis of filter samples collected with conventional respirable samplers at each of seven locations (six near production processes and one outdoors). Throughout most of the facility and outdoors, respirable mass concentrations were low (titanium determined with inductively coupled plasma atomic emission spectrometry). In contrast, in a single area with extensive material handling, mass concentrations were greatest (0.118 mg m(-3)) and contained up to 39% +/- 11% lithium titanium, indicating the presence of airborne nanomaterial. Analysis of the filter samples collected in this area by transmission electron microscope and scanning electron microscope revealed that the airborne nanomaterial was associated only with spherical aggregates (clusters of fused 10-80 nm nanoparticles) that were larger than 200 nm. This analysis also showed that nanoparticles in this area were the smallest particles of a larger distribution of submicrometer chain agglomerates likely from welding in an adjacent area of the facility. The second method used two, hand-held, direct-reading, battery-operated instruments to obtain a time series of very fine particle number (product is predominately composed of particles larger than several hundred nanometers. The methods presented here are applicable to any occupational or environmental setting in which one needs to distinguish incidental sources from engineered product.

  12. Pedagogies to Achieve Sustainability Learning Outcomes in Civil and Environmental Engineering Students

    Directory of Open Access Journals (Sweden)

    Angela R. Bielefeldt

    2013-10-01

    Full Text Available The civil and environmental engineering disciplines have identified the levels of knowledge about sustainability that are desirable for students to achieve as they graduate with a bachelor’s degree, as well as sustainability-related competencies to be obtained during a master’s degree, and on-the-job, prior to professional licensure. Different pedagogies are better suited to help students attain these levels of cognitive ability, while also developing affective outcomes. This paper provides examples of different methods that have been used at one institution to educate engineering students about sustainability, supported with data that indicates whether the method successfully achieved the targeted learning outcomes. Lectures, in-class active learning, readings, and appropriately targeted homework assignments can achieve basic sustainability knowledge and comprehension by requiring students to define, identify, and explain aspects of sustainability. Case studies and the application of software tools are good methods to achieve application and analysis competencies. Project-based learning (PBL and project-based service-learning (PBSL design projects can reach the synthesis level and may also develop affective outcomes related to sustainability. The results provide examples that may apply to a wider range of disciplines and suggest sustainability outcomes that are particularly difficult to teach and/or assess.

  13. Idaho National Engineering Laboratory Environmental Restoration Program Schedule Contingency Evaluation Report

    International Nuclear Information System (INIS)

    1993-09-01

    This report represents the schedule contingency evaluation done on the FY-93 Major System Acquisition (MSA) Baseline for the Idaho National Engineering Laboratory's (INEL) Environmental Restoration Program (EPP). A Schedule Contingency Evaluation Team (SCET) was established to evaluate schedule contingency on the MSA Baseline for the INEL ERP associated with completing work within milestones established in the baseline. Baseline schedules had been established considering enforceable deadlines contained in the Federal Facilities Agreement/Consent Order (FFA/CO), the agreement signed in 1992, by the State of Idaho, Department of Health ampersand Welfare, the U.S. Environmental Protection Agency, Region 10, and the U.S. Department of Energy, Idaho Operations Office. The evaluation was based upon the application of standard schedule risk management techniques to the specific problems of the INEL ERP. The schedule contingency evaluation was designed to provided early visibility for potential schedule delays impacting enforceable deadlines. The focus of the analysis was on the duration of time needed to accomplish all required activities to achieve completion of the milestones in the baseline corresponding to the enforceable deadlines. Additionally, the analysis was designed to identify control of high-probability, high-impact schedule risk factors

  14. Synthesis of biomass derived carbon materials for environmental engineering and energy storage applications

    Science.gov (United States)

    Huggins, Mitchell Tyler

    Biomass derived carbon (BC) can serve as an environmentally and cost effective material for both remediation and energy production/storage applications. The use of locally derived biomass, such as unrefined wood waste, provides a renewable feedstock for carbon material production compared to conventional unrenewable resources like coal. Additionally, energy and capital cost can be reduced through the reduction in transport and processing steps and the use of spent material as a soil amendment. However, little work has been done to evaluate and compare biochar to conventional materials such as granular activated carbon or graphite in advanced applications of Environmental Engineering. In this work I evaluated the synthesis and compared the performance of biochar for different applications in wastewater treatment, nutrient recovery, and energy production and storage. This includes the use of biochar as an electrode and filter media in several bioelectrochemical systems (BES) treating synthetic and industrial wastewater. I also compared the treatment efficiency of granular biochar as a packed bed adsorbent for the primary treatment of high strength brewery wastewater. My studies conclude with the cultivation of fungal biomass to serve as a template for biochar synthesis, controlling the chemical and physical features of the feedstock and avoiding some of the limitations of waste derived materials.

  15. Environmental, health, and safety effects of engineered nanomaterials: challenges and research needs

    Science.gov (United States)

    Fairbrother, Howard

    2010-04-01

    The number of technologies and consumer products that incorporate engineered nanomaterials (ENMs) has grown rapidly. Indeed, ENMs such as carbon nanotubes and nano-silver, are revolutionizing many commercial technologies and have already been incorporated into more than 800 commercial products, including polymer composites, cell phone batteries, sporting equipment and cosmetics. The global market for ENMs has grown steadily from 7.5 billion in 2003 to 12.7 billion in 2008. Over the next five years, their market value is expected to exceed $27 billion. This surge in demand has been responsible for a corresponding increase in the annual production rates of ENMs. For example, Bayer anticipates that single and multi-walled carbon nanotubes (SWNT and MWNT) production rates will reach 3,000 tons/yr by 2012. Inevitably, some of these synthetic materials will enter the environment either from incidental release during manufacture and transport, or following use and disposal. Consequently, intense scientific research is now being directed towards understanding the environmental, health and safety (EHS) risks posed by ENMs. I will highlight some of the key research challenges and needs in this area, include (i) developing structure-property relationships that will enable physicochemical properties of ENMs to be correlated with environmentally relevant behavior (e.g. colloidal properties, toxicity), (ii) determining the behavior of nanoproducts, and (iii) developing analytical techniques capable of detecting and quantifying the concentration of ENMs in the environment.

  16. The Idaho National Engineering Laboratory Site environmental report for calendar year 1991

    International Nuclear Information System (INIS)

    Hoff, D.L.; Mitchell, R.G.; Moore, R.; Bingham, L.

    1992-09-01

    The results of the various monitoring programs for 1991 indicate that most radioactivity from the Idaho National Engineering Laboratory (INEL) operations could not be distinguished from worldwide fallout and natural radioactivity in the region surrounding the INEL Site. Although some radioactive materials were discharged during Site operations, concentrations and doses to the surrounding population were of no health consequence and were far less than State of Idaho and Federal health protection guidelines. The first section of the report summarizes Calendar Year 1991 and January 1 through June 1, 1992, INEL activities related to compliance with environmental regulations and laws. The major portion of the report summarizes results of the RESL environmental surveillance program, which includes the collection of foodstuffs at the INEL boundary and distant offsite locations, and the collection of air and water samples at onsite locations and offsite boundary and distant locations. The report also compares and evaluates the sample results to appropriate federal regulations and standards and discusses implications, if any. The US Geological Survey (USGS) groundwater monitoring program is briefly summarized and data from USGS reports are included in tables and maps showing the spread of contaminants. Effluent monitoring and nonradiological drinking water monitoring performed by INEL contractors are discussed briefly and data are summarized in tables

  17. Experimental Engineering Section semiannual progress report, March 1-August 31, 1976. Volume 2. Biotechnology and environmental programs

    Energy Technology Data Exchange (ETDEWEB)

    Pitt, Jr., W. W.; Mrochek, J. E. [comps.

    1978-03-01

    This volume contains the progress report of the biotechnology and environmental programs in the Experimental Engineering Section of the Chemical Technology Division. Research efforts in these programs during this report period have been in five areas: (1) environmental research; (2) centrifugal analyzer development; (3) advanced analytical systems development; (4) bioengineering research; and (5) bioengineering development. Summaries of these programmatic areas are contained in Volume I.

  18. Influences of use activities and waste management on environmental releases of engineered nanomaterials

    Energy Technology Data Exchange (ETDEWEB)

    Wigger, Henning, E-mail: hwigger@uni-bremen.de [Faculty of Production Engineering, Department of Technological Design and Development, University of Bremen, Badgasteiner Str. 1, 28359 Bremen (Germany); Hackmann, Stephan [UFT Center for Environmental Research and Sustainable Technology, Department of General and Theoretical Ecology, University of Bremen, Leobener Str., 28359 Bremen (Germany); Zimmermann, Till [Faculty of Production Engineering, Department of Technological Design and Development, University of Bremen, Badgasteiner Str. 1, 28359 Bremen (Germany); ARTEC — Research Center for Sustainability Studies, Enrique-Schmidt-Str. 7, 28359 Bremen (Germany); Köser, Jan [UFT Center for Environmental Research and Sustainable Technology, Department of Sustainable Chemistry, University of Bremen, Leobener Str., 28359 Bremen (Germany); Thöming, Jorg [UFT Center for Environmental Research and Sustainable Technology, Department of Sustainable Chemical Engineering, University of Bremen, Leobener Str., 28359 Bremen (Germany); Gleich, Arnim von [Faculty of Production Engineering, Department of Technological Design and Development, University of Bremen, Badgasteiner Str. 1, 28359 Bremen (Germany); ARTEC — Research Center for Sustainability Studies, Enrique-Schmidt-Str. 7, 28359 Bremen (Germany)

    2015-12-01

    Engineered nanomaterials (ENM) offer enhanced or new functionalities and properties that are used in various products. This also entails potential environmental risks in terms of hazard and exposure. However, hazard and exposure assessment for ENM still suffer from insufficient knowledge particularly for product-related releases and environmental fate and behavior. This study therefore analyzes the multiple impacts of the product use, the properties of the matrix material, and the related waste management system (WMS) on the predicted environmental concentration (PEC) by applying nine prospective life cycle release scenarios based on reasonable assumptions. The products studied here are clothing textiles treated with silver nanoparticles (AgNPs), since they constitute a controversial application. Surprisingly, the results show counter-intuitive increases by a factor of 2.6 in PEC values for the air compartment in minimal AgNP release scenarios. Also, air releases can shift from washing to wearing activity; their associated release points may shift accordingly, potentially altering release hot spots. Additionally, at end-of-life, the fraction of AgNP-residues contained on exported textiles can be increased by 350% when assuming short product lifespans and globalized WMS. It becomes evident that certain combinations of use activities, matrix material characteristics, and WMS can influence the regional PEC by several orders of magnitude. Thus, in the light of the findings and expected ENM market potential, future assessments should consider these aspects to derive precautionary design alternatives and to enable prospective global and regional risk assessments. - Highlights: • Textile use activities and two waste management systems (WMSs) are investigated. • Matrix material and use activities determine the ENM release. • Counter-intuitive shifts of releases to air can happen during usage. • WMS export can increase by 350% in case of short service life and

  19. Influences of use activities and waste management on environmental releases of engineered nanomaterials

    International Nuclear Information System (INIS)

    Wigger, Henning; Hackmann, Stephan; Zimmermann, Till; Köser, Jan; Thöming, Jorg; Gleich, Arnim von

    2015-01-01

    Engineered nanomaterials (ENM) offer enhanced or new functionalities and properties that are used in various products. This also entails potential environmental risks in terms of hazard and exposure. However, hazard and exposure assessment for ENM still suffer from insufficient knowledge particularly for product-related releases and environmental fate and behavior. This study therefore analyzes the multiple impacts of the product use, the properties of the matrix material, and the related waste management system (WMS) on the predicted environmental concentration (PEC) by applying nine prospective life cycle release scenarios based on reasonable assumptions. The products studied here are clothing textiles treated with silver nanoparticles (AgNPs), since they constitute a controversial application. Surprisingly, the results show counter-intuitive increases by a factor of 2.6 in PEC values for the air compartment in minimal AgNP release scenarios. Also, air releases can shift from washing to wearing activity; their associated release points may shift accordingly, potentially altering release hot spots. Additionally, at end-of-life, the fraction of AgNP-residues contained on exported textiles can be increased by 350% when assuming short product lifespans and globalized WMS. It becomes evident that certain combinations of use activities, matrix material characteristics, and WMS can influence the regional PEC by several orders of magnitude. Thus, in the light of the findings and expected ENM market potential, future assessments should consider these aspects to derive precautionary design alternatives and to enable prospective global and regional risk assessments. - Highlights: • Textile use activities and two waste management systems (WMSs) are investigated. • Matrix material and use activities determine the ENM release. • Counter-intuitive shifts of releases to air can happen during usage. • WMS export can increase by 350% in case of short service life and

  20. Environmental Survey preliminary report, Idaho National Engineering Laboratory, Idaho Falls, Idaho and Component Development and Integration Facility, Butte, Montana

    International Nuclear Information System (INIS)

    1988-09-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Idaho National Engineering Laboratory (INEL) and Component Development and Integration Facility (CDIF), conducted September 14 through October 2, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the INEL and CDIF. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations' carried on at the INEL and the CDIF, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S ampersand A) Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The S ampersand A Plan will be executed by the Oak Ridge National Laboratory. When completed, the S ampersand A results will be incorporated into the INEL/CDIF Survey findings for inclusion into the Environmental Survey Summary Report. 90 refs., 95 figs., 77 tabs

  1. Environmental Survey preliminary report, Idaho National Engineering Laboratory, Idaho Falls, Idaho and Component Development and Integration Facility, Butte, Montana

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Idaho National Engineering Laboratory (INEL) and Component Development and Integration Facility (CDIF), conducted September 14 through October 2, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the INEL and CDIF. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations' carried on at the INEL and the CDIF, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The S A Plan will be executed by the Oak Ridge National Laboratory. When completed, the S A results will be incorporated into the INEL/CDIF Survey findings for inclusion into the Environmental Survey Summary Report. 90 refs., 95 figs., 77 tabs.

  2. FTIR Determination of Pollutants in Automobile Exhaust: An Environmental Chemistry Experiment Comparing Cold-Start and Warm-Engine Conditions

    Science.gov (United States)

    Medhurst, Laura L.

    2005-01-01

    An experiment developed from the Advanced Integrated Environmental Laboratory illustrates the differences in automobile exhaust before and after the engine is warmed, using gas-phase Fourier transform infrared spectroscopy (FTIR). The apparatus consists of an Avatar 360 FTIR spectrometer from Nicolet fitted with a variable path length gas cell,…

  3. The Role of Gender in Students' Ratings of Teaching Quality in Computer Science and Environmental Engineering

    Science.gov (United States)

    Price, Linda; Svensson, Ingrid; Borell, Jonas; Richardson, John T. E.

    2017-01-01

    Students' ratings of teaching quality on course units in a computer science program and an environmental engineering program at a large Swedish university were obtained using the Course Experience Questionnaire; 8888 sets of ratings were obtained from men and 4280 sets were obtained from women over ten academic years. These student ratings from…

  4. Incorporating a Systems Approach into Civil and Environmental Engineering Curricula: Effect on Course Redesign, and Student and Faculty Attitudes

    Science.gov (United States)

    Hayden, Nancy J.; Rizzo, Donna M.; Dewoolkar, Mandar M.; Neumann, Maureen D.; Lathem, Sandra; Sadek, Adel

    2011-01-01

    This paper presents a brief overview of the changes made during our department level reform (DLR) process (Grant Title: "A Systems Approach for Civil and Environmental Engineering Education: Integrating Systems Thinking, Inquiry-Based Learning and Catamount Community Service-Learning Projects") and some of the effects of these changes on…

  5. Estimation of Titanium dioxide and Silver engineered nanoparticles environmental exposure risks in water: a case of Gauteng Province, South Africa

    CSIR Research Space (South Africa)

    Nota, N

    2010-09-01

    Full Text Available to increase in future as shown in Figure 4. However, there is current limited risk assessment data of engineered nanoparticles (ENPs) in the actual environmental systems4-6 (see Figure 5) due to lack of metrology to quantify their fate, toxicity, and behaviour...

  6. Adsorption of Oxy-Anions in the Teaching Laboratory: An Experiment to Study a Fundamental Environmental Engineering Problem

    Science.gov (United States)

    D'Arcy, Mitch; Bullough, Florence; Moffat, Chris; Borgomeo, Edoardo; Teh, Micheal; Vilar, Ramon; Weiss, Dominik J.

    2014-01-01

    Synthesizing and testing bicomposite adsorbents for the removal of environmentally problematic oxy-anions is high on the agenda of research-led universities. Here we present a laboratory module successfully developed at Imperial College London that introduces the advanced undergraduate student in engineering (chemical, civil, earth) and science…

  7. Development of a Study Module on and Pedagogical Approaches to Industrial Environmental Engineering and Sustainability in Mozambique

    Science.gov (United States)

    Husgafvel, Roope; Martikka, Mikko; Egas, Andrade; Ribiero, Natasha; Dahl, Olli

    2017-01-01

    Addressing the sustainability challenges in the forest sector in Mozambique requires capacity building for higher education and training of new skilled expert and future decision-makers. Our approach was to develop a study module on and pedagogical approaches to industrial environmental engineering and sustainability. The idea was to develop a…

  8. Introducing a Transdisciplinary Approach in Studies regarding Risk Assessment and Management in Educational Programs for Environmental Engineers and Planners

    Science.gov (United States)

    Menoni, Scira

    2006-01-01

    Purpose: The purpose of this paper is to discuss how long term risk prevention and civil protection may enter in university programs for environmental engineers and urban and regional planners. Design/methodology/approach: First the distinction between long term risk prevention and emergency preparedness is made, showing that while the first has…

  9. Metabolic Network Modeling of Microbial Interactions in Natural and Engineered Environmental Systems

    Science.gov (United States)

    Perez-Garcia, Octavio; Lear, Gavin; Singhal, Naresh

    2016-01-01

    We review approaches to characterize metabolic interactions within microbial communities using Stoichiometric Metabolic Network (SMN) models for applications in environmental and industrial biotechnology. SMN models are computational tools used to evaluate the metabolic engineering potential of various organisms. They have successfully been applied to design and optimize the microbial production of antibiotics, alcohols and amino acids by single strains. To date however, such models have been rarely applied to analyze and control the metabolism of more complex microbial communities. This is largely attributed to the diversity of microbial community functions, metabolisms, and interactions. Here, we firstly review different types of microbial interaction and describe their relevance for natural and engineered environmental processes. Next, we provide a general description of the essential methods of the SMN modeling workflow including the steps of network reconstruction, simulation through Flux Balance Analysis (FBA), experimental data gathering, and model calibration. Then we broadly describe and compare four approaches to model microbial interactions using metabolic networks, i.e., (i) lumped networks, (ii) compartment per guild networks, (iii) bi-level optimization simulations, and (iv) dynamic-SMN methods. These approaches can be used to integrate and analyze diverse microbial physiology, ecology and molecular community data. All of them (except the lumped approach) are suitable for incorporating species abundance data but so far they have been used only to model simple communities of two to eight different species. Interactions based on substrate exchange and competition can be directly modeled using the above approaches. However, interactions based on metabolic feedbacks, such as product inhibition and synthropy require extensions to current models, incorporating gene regulation and compounding accumulation mechanisms. SMN models of microbial interactions can

  10. Metabolic Network Modeling of Microbial Interactions in Natural and Engineered Environmental Systems.

    Science.gov (United States)

    Perez-Garcia, Octavio; Lear, Gavin; Singhal, Naresh

    2016-01-01

    We review approaches to characterize metabolic interactions within microbial communities using Stoichiometric Metabolic Network (SMN) models for applications in environmental and industrial biotechnology. SMN models are computational tools used to evaluate the metabolic engineering potential of various organisms. They have successfully been applied to design and optimize the microbial production of antibiotics, alcohols and amino acids by single strains. To date however, such models have been rarely applied to analyze and control the metabolism of more complex microbial communities. This is largely attributed to the diversity of microbial community functions, metabolisms, and interactions. Here, we firstly review different types of microbial interaction and describe their relevance for natural and engineered environmental processes. Next, we provide a general description of the essential methods of the SMN modeling workflow including the steps of network reconstruction, simulation through Flux Balance Analysis (FBA), experimental data gathering, and model calibration. Then we broadly describe and compare four approaches to model microbial interactions using metabolic networks, i.e., (i) lumped networks, (ii) compartment per guild networks, (iii) bi-level optimization simulations, and (iv) dynamic-SMN methods. These approaches can be used to integrate and analyze diverse microbial physiology, ecology and molecular community data. All of them (except the lumped approach) are suitable for incorporating species abundance data but so far they have been used only to model simple communities of two to eight different species. Interactions based on substrate exchange and competition can be directly modeled using the above approaches. However, interactions based on metabolic feedbacks, such as product inhibition and synthropy require extensions to current models, incorporating gene regulation and compounding accumulation mechanisms. SMN models of microbial interactions can

  11. Metabolic network modeling of microbial interactions in natural and engineered environmental systems

    Directory of Open Access Journals (Sweden)

    Octavio ePerez-Garcia

    2016-05-01

    Full Text Available We review approaches to characterize metabolic interactions within microbial communities using Stoichiometric Metabolic Network (SMN models for applications in environmental and industrial biotechnology. SMN models are computational tools used to evaluate the metabolic engineering potential of various organisms. They have successfully been applied to design and optimize the microbial production of antibiotics, alcohols and amino acids by single strains. To date however, such models have been rarely applied to analyze and control the metabolism of more complex microbial communities. This is largely attributed to the diversity of microbial community functions, metabolisms and interactions. Here, we firstly review different types of microbial interaction and describe their relevance for natural and engineered environmental processes. Next, we provide a general description of the essential methods of the SMN modeling workflow including the steps of network reconstruction, simulation through Flux Balance Analysis (FBA, experimental data gathering, and model calibration. Then we broadly describe and compare four approaches to model microbial interactions using metabolic networks, i.e. i lumped networks, ii compartment per guild networks, iii bi-level optimization simulations and iv dynamic-SMN methods. These approaches can be used to integrate and analyze diverse microbial physiology, ecology and molecular community data. All of them (except the lumped approach are suitable for incorporating species abundance data but so far they have been used only to model simple communities of two to eight different species. Interactions based on substrate exchange and competition can be directly modeled using the above approaches. However, interactions based on metabolic feedbacks, such as product inhibition and synthropy require extensions to current models, incorporating gene regulation and compounding accumulation mechanisms. SMN models of microbial

  12. Soil bio-engineering for risk mitigation and environmental restoration in a humid tropical area

    Science.gov (United States)

    Petrone, A.; Preti, F.

    2009-07-01

    The use of soil bio-engineering techniques in developing countries is a relevant issue for disaster mitigation, environmental restoration and poverty reduction. Research on authochtonal plants suitable for this kind of works and on economic efficiency is essential for the divulgation of such techniques. The present paper is focused on this two issues related to the realization of various typologies of soil bio-engineering works in the humid tropic of Nicaragua. In the area of Río Blanco, located in the Department of Matagalpa, soil bio-engineering installations were built in several sites. The particular structures built were: drainages with live fascine mattress, a live palisade, a vegetated live crib wall for riverbank protection, a vegetative covering made of a metallic net and biotextile coupled with a live palisade made of bamboo. In order to evaluate the suitability of the various plants used in the works, monitorings were performed, one in the live palisade alongside an unpaved road and the other on the live crib wall along a riverbank, collecting survival rate and morphological parameters data. Concerning the economic efficiency we proceed to a financial analysis of the works and once the unit price was obtained, we converted the amount in EPP Dollars (Equal Purchasing Power) in order to compare the Nicaraguan context with the Italian one. Among the used species we found that Madero negro (Gliricidia sepium) and Roble macuelizo (Tabebuia rosea) are adequate for soil-bioengineering measure on slopes while Helequeme (Erythrina fusca) reported a successful behaviour only in the crib wall for riverbank protection. In the comparison of the costs in Nicaragua and in Italy, the unit price reduction for the Central American country ranges between 1.5 times (for the vegetative covering) and almost 4 times (for the fascine mattress) if it's used the EPP dollar exchange rate. Conclusions are reached with regard to hydrological-risk mitigating actions performed on a

  13. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement

    International Nuclear Information System (INIS)

    1994-06-01

    This volume contains the following attachments: transportation of Naval spent nuclear fuel; description of Naval spent nuclear receipt and handling at the Expended Core Facility at the Idaho National Engineering Laboratory; comparison of storage in new water pools versus dry container storage; description of storage of Naval spent nuclear fuel at servicing locations; description of receipt, handling, and examination of Naval spent nuclear fuel at alternate DOE facilities; analysis of normal operations and accident conditions; and comparison of the Naval spent nuclear fuel storage environmental assessment and this environmental impact statement

  14. Annual report -- 1992: Environmental surveillance for EG & G Idaho Waste Management Facilities at the Idaho National Engineering Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Wilhelmsen, R.N.; Wright, K.C.; McBride, D.W.

    1993-08-01

    This report describes the 1992 environmental surveillance activities of the Environmental Monitoring Unit of EG&G Idaho, Inc., at EG&G Idaho-operated Waste Management facilities at the Idaho National Engineering Laboratory (INEL). The major facilities monitored include the Radioactive Waste Management Complex, the Waste Experimental Reduction Facility, the Mixed Waste Storage Facility, and two surplus facilities. Included are some results of the sampling performed by the Radiological and Environmental Sciences Laboratory and the United States Geological Survey. The primary purposes of monitoring are to evaluate environmental conditions, to provide and interpret data, to ensure compliance with applicable regulations or standards, and to ensure protection of human health and the environment. This report compares 1992 environmental surveillance data with DOE derived concentration guides, and with data from previous years.

  15. Idaho National Engineering Laboratory (INEL) Environmental Restoration (ER) Program Baseline Safety Analysis File (BSAF)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Baseline Safety Analysis File (BSAF) is a facility safety reference document for the Idaho National Engineering Laboratory (INEL) environmental restoration activities. The BSAF contains information and guidance for safety analysis documentation required by the U.S. Department of Energy (DOE) for environmental restoration (ER) activities, including: Characterization of potentially contaminated sites. Remedial investigations to identify and remedial actions to clean up existing and potential releases from inactive waste sites Decontamination and dismantlement of surplus facilities. The information is INEL-specific and is in the format required by DOE-EM-STD-3009-94, Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports. An author of safety analysis documentation need only write information concerning that activity and refer to BSAF for further information or copy applicable chapters and sections. The information and guidance provided are suitable for: {sm_bullet} Nuclear facilities (DOE Order 5480-23, Nuclear Safety Analysis Reports) with hazards that meet the Category 3 threshold (DOE-STD-1027-92, Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports) {sm_bullet} Radiological facilities (DOE-EM-STD-5502-94, Hazard Baseline Documentation) Nonnuclear facilities (DOE-EM-STD-5502-94) that are classified as {open_quotes}low{close_quotes} hazard facilities (DOE Order 5481.1B, Safety Analysis and Review System). Additionally, the BSAF could be used as an information source for Health and Safety Plans and for Safety Analysis Reports (SARs) for nuclear facilities with hazards equal to or greater than the Category 2 thresholds, or for nonnuclear facilities with {open_quotes}moderate{close_quotes} or {open_quotes}high{close_quotes} hazard classifications.

  16. Evolution of project-based learning in small groups in environmental engineering courses

    Directory of Open Access Journals (Sweden)

    Jesús M. Requies

    2018-03-01

    Full Text Available This work presents the assessment of the development and evolution of an active methodology (Project-Based Learning –PBL- implemented on the course “Unit Operations in Environmental Engineering”, within the bachelor’s degree in Environmental Engineering, with the purpose of decreasing the dropout rate in this course. After the initial design and implementation of this methodology during the first academic year (12/13, different modifications were adopted in the following ones (13-14, 14-15 & 15-16 in order to optimize the student’s and professor’s work load as well as correct some malfunctions observed in the initial design of the PBL. This active methodology seeks to make students the main architects of their own learning processes. Accordingly, they have to identify their learning needs, which is a highly motivating approach both for their curricular development and for attaining the required learning outcomes in this field of knowledge. The results obtained show that working in small teams (cooperative work enhances each group member’s self–learning capabilities. Moreover, academic marks improve when compared to traditional learning methodologies. Nevertheless, the implementation of more active methodologies, such as project-based learning, in small groups has certain specific characteristics. In this case it has been implemented simultaneously in two different groups of 10 students each one. Such small groups are more heterogeneoussince the presence of two highly motivated students or not can vary or affect the whole group’s attitude and academic results.

  17. Idaho National Engineering Laboratory (INEL) Environmental Restoration (ER) Program Baseline Safety Analysis File (BSAF)

    International Nuclear Information System (INIS)

    1995-09-01

    The Baseline Safety Analysis File (BSAF) is a facility safety reference document for the Idaho National Engineering Laboratory (INEL) environmental restoration activities. The BSAF contains information and guidance for safety analysis documentation required by the U.S. Department of Energy (DOE) for environmental restoration (ER) activities, including: Characterization of potentially contaminated sites. Remedial investigations to identify and remedial actions to clean up existing and potential releases from inactive waste sites Decontamination and dismantlement of surplus facilities. The information is INEL-specific and is in the format required by DOE-EM-STD-3009-94, Preparation Guide for U.S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports. An author of safety analysis documentation need only write information concerning that activity and refer to BSAF for further information or copy applicable chapters and sections. The information and guidance provided are suitable for: sm-bullet Nuclear facilities (DOE Order 5480-23, Nuclear Safety Analysis Reports) with hazards that meet the Category 3 threshold (DOE-STD-1027-92, Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports) sm-bullet Radiological facilities (DOE-EM-STD-5502-94, Hazard Baseline Documentation) Nonnuclear facilities (DOE-EM-STD-5502-94) that are classified as open-quotes lowclose quotes hazard facilities (DOE Order 5481.1B, Safety Analysis and Review System). Additionally, the BSAF could be used as an information source for Health and Safety Plans and for Safety Analysis Reports (SARs) for nuclear facilities with hazards equal to or greater than the Category 2 thresholds, or for nonnuclear facilities with open-quotes moderateclose quotes or open-quotes highclose quotes hazard classifications

  18. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    This document analyzes at a pregrammatic level the potential environmental consequences over the next 40 years of alternatives related to the transportation, receipt, processing, and storage of spent nuclear fuel under the responsibility of the US Department of Energy. It also analyzes the site-specific consequences of the Idaho National Engineering Laboratory sitewide actions anticipated over the next 10 years for waste and spent nuclear fuel management and environmental restoration. For pregrammatic spent nuclear fuel management, this document analyzes alternatives of no action, decentralization, regionalization, centralization and the use of the plans that existed in 1992/1993 for the management of these materials. For the Idaho National Engineering Laboratory, this document analyzes alternatives of no action, ten-year plan, minimum and maximum treatment, storage, and disposal of US Department of Energy wastes.

  19. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement

    International Nuclear Information System (INIS)

    1994-06-01

    This document analyzes at a pregrammatic level the potential environmental consequences over the next 40 years of alternatives related to the transportation, receipt, processing, and storage of spent nuclear fuel under the responsibility of the US Department of Energy. It also analyzes the site-specific consequences of the Idaho National Engineering Laboratory sitewide actions anticipated over the next 10 years for waste and spent nuclear fuel management and environmental restoration. For pregrammatic spent nuclear fuel management, this document analyzes alternatives of no action, decentralization, regionalization, centralization and the use of the plans that existed in 1992/1993 for the management of these materials. For the Idaho National Engineering Laboratory, this document analyzes alternatives of no action, ten-year plan, minimum and maximum treatment, storage, and disposal of US Department of Energy wastes

  20. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement. Volume 2, Part A

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    This document analyzes at a programmatic level the potential environmental consequences over the next 40 years of alternatives related to the transportation, receipt, processing, and storage of spent nuclear fuel under the responsibility of the US Department of Energy. It also analyzes the site-specific consequences of the Idaho National Engineering Laboratory sitewide actions anticipated over the next 10 years for waste and spent nuclear fuel management and environmental restoration. For programmatic spent nuclear fuel management this document analyzes alternatives of no action, decentralization, regionalization, centralization and the use of the plans that existed in 1992/1993 for the management of these materials. For the Idaho National Engineering Laboratory, this document analyzes alternatives of no action, ten-year plan, minimum and maximum and maximum treatment, storage, and disposal of US Department of Energy wastes.

  1. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement

    International Nuclear Information System (INIS)

    1994-06-01

    This document analyzes at a programmatic level the potential environmental consequences over the next 40 years of alternatives related to the transportation, receipt, processing, and storage of spent nuclear fuel under the responsibility of the US Department of Energy. It also analyzes the site-specific consequences of the Idaho National Engineering Laboratory sitewide actions anticipated over the next 10 years for waste and spent nuclear fuel management and environmental restoration. For programmatic spent nuclear fuel management this document analyzes alternatives of no action, decentralization, regionalization, centralization and the use of the plans that existed in 1992/1993 for the management of these materials. For the Idaho National Engineering Laboratory, this document analyzes alternatives of no action, ten-year plan, minimum and maximum and maximum treatment, storage, and disposal of US Department of Energy wastes

  2. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs draft environmental impact statement

    International Nuclear Information System (INIS)

    1994-06-01

    This document analyzes at a programmatic level the potential environmental consequences over the next 40 years of alternatives related to the transportation, receipt, processing, and storage of spent nuclear fuel under the responsibility of the US Department of Energy. It also analyzes the site-specific consequences of the Idaho National Engineering Laboratory sitewide actions anticipated over the next 10 years for waste and spent nuclear fuel management and environmental restoration. For programmatic spent nuclear fuel management, this document analyzes alternatives of no action, decentralization, regionalization, centralization and the use of the plans that existed in 1992/1993 for the management of these materials. For the Idaho National Engineering Laboratory, this document analyzes alternatives of no action, ten-year plan, minimum and maximum treatment, storage, and disposal of US Department of Energy wastes

  3. Fe-aminoclay-entrapping electrospun polyacrylonitrile nanofibers (FeAC-PAN NFs) for environmental engineering applications

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Young [Korea Railroad Research Institute, Uiwang (Korea, Republic of); Choi, Saehae [Korea Research Institute of Bioscience and Biotechnology, Daejeon (Korea, Republic of); Park, Seung Bin [KAIST, Daejeon (Korea, Republic of); Kim, Mooon Il; Lee, Young Chul [Gachon Univ., Seongnam (Korea, Republic of); Lee, Go Woon [KIER, Daejeon (Korea, Republic of); Lee, Hyun Uk [Korea Basic Science Institute, Daejeon (Korea, Republic of)

    2015-09-15

    Electrospun polyacrylonitrile nanofibers (PAN NFs) with entrapped water-soluble Fe-aminoclay (FeAC) [FeAC-PAN NFs] were prepared. Slow dropwise addition of water-soluble FeAC into a PAN solution, less aggregated of FeAC into electrospun PAN NFs was one-pot evolved without FeAC post-decoration onto as-prepared PAN NFs. Taking into consideration both the Fe{sup 3+} source in FeAC and the improved surface hydrophilicity, the feasibility of Fentonlike reaction for decolorization of cationic model dye methylene blue (MB) under 6 hrs UV-light irradiation was established. In the case where FeAC-PAN NFs were enhanced by hydrogen peroxide (H{sub 2}O{sub 2}) injection, the apparent kinetic reaction rates were increased relative to those for the PAN NFs. Thus, our flexible FeAC-PAN NF mats can be effectively utilized in water/waste treatment and other environmental engineering applications.

  4. Incineration of DOE offsite mixed waste at the Idaho National Engineering and Environmental Laboratory

    International Nuclear Information System (INIS)

    Harris, J.D.; Harvego, L.A.; Jacobs, A.M.; Willcox, M.V.

    1998-01-01

    The Waste Experimental Reduction Facility (WERF) incinerator at the Idaho National Engineering and Environmental Laboratory (INEEL) is one of three incinerators in the US Department of Energy (DOE) Complex capable of incinerating mixed low-level waste (MLLW). WERF has received MLLW from offsite generators and is scheduled to receive more. The State of Idaho supports receipt of offsite MLLW waste at the WERF incinerator within the requirements established in the (INEEL) Site Treatment Plan (STP). The incinerator is operating as a Resource Conservation and Recovery Act (RCRA) Interim Status Facility, with a RCRA Part B permit application currently being reviewed by the State of Idaho. Offsite MLLW received from other DOE facilities are currently being incinerated at WERF at no charge to the generator. Residues associated with the incineration of offsite MLLW waste that meet the Envirocare of Utah waste acceptance criteria are sent to that facility for treatment and/or disposal. WERF is contributing to the treatment and reduction of MLLW in the DOE Complex

  5. Virtual Placements to Develop Employability Skills for Civil and Environmental Engineering Students

    Directory of Open Access Journals (Sweden)

    Parneet Paul

    2015-04-01

    Full Text Available This project work addresses the crucial need to encourage undergraduate civil and environmental engineering students to gain employment skills and training right from the start of their studies so that their overall employability increases; their confidence level in networking with industry and within the workplace increases; and so that they are successfully able to obtain employment after finishing their studies. This initiative is a stepping-stone employability exercise which focuses specifically on first year students to help them engage with industry right from the start of their course. It is proposed that they would gain some realistic work experience both individually and as part of group within a virtual work environment using an action learning approach. The virtual environment used was based on SecondLife, a popular virtual reality programme. A pilot scheme was set up and run at Brunel University during the summer of 2014 using eight self-selecting first year students. The scheme’s outputs were extensively monitored and evaluated to assess its impact on the development of employability skills. This approach may prove a cost effective way of letting students gain an insight into the workplace whilst improving these skills. It may also prove a way for employers to select from a large range of students the best to actually undertake their real work-based internships.

  6. Secondary materials: Engineering properties, environmental consequences, and social and economic impacts. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Breslin, V.; Reaven, S.; Schwartz, M.; Swanson, L.; Zweig, M.; Bortman, M.; Schubel, J.

    1993-08-01

    This report investigates two secondary materials, plastic lumber made from mixed plastic waste, and cement blocks and structures made with incinerator ash. Engineering properties, environmental impacts, and energy costs and savings of these secondary materials are compared to standard lumber products and cement blocks. Market capacity and social acceptance of plastic lumber and stabilized ash products are analyzed. These secondary materials apparently have potential markets; however, their economic value is primarily that they will not take up landfill space. For plastic lumber and stabilized incinerator ash products, marine and highway construction seem ideal public works applications. Incinerator ash may be suitable to use in seawalls, jetties, fishing reefs, highway barriers, and roadbed applications. Docks, piers, highway sound barriers, parking stops, and park furniture may all be made from plastic lumber. To encourage public acceptance and improve the market potential of secondary materials, these activities could be beneficial: industry should emphasize developing useful, long-lived products; industry and governments should create product performance criteria; government should provide rigorous testing and demonstration programs; and government and industry should cooperate to improve public outreach and educational programs.

  7. Genetically engineered trees for plantation forests: key considerations for environmental risk assessment.

    Science.gov (United States)

    Häggman, Hely; Raybould, Alan; Borem, Aluizio; Fox, Thomas; Handley, Levis; Hertzberg, Magnus; Lu, Meng-Zu; Macdonald, Philip; Oguchi, Taichi; Pasquali, Giancarlo; Pearson, Les; Peter, Gary; Quemada, Hector; Séguin, Armand; Tattersall, Kylie; Ulian, Eugênio; Walter, Christian; McLean, Morven

    2013-09-01

    Forests are vital to the world's ecological, social, cultural and economic well-being yet sustainable provision of goods and services from forests is increasingly challenged by pressures such as growing demand for wood and other forest products, land conversion and degradation, and climate change. Intensively managed, highly productive forestry incorporating the most advanced methods for tree breeding, including the application of genetic engineering (GE), has tremendous potential for producing more wood on less land. However, the deployment of GE trees in plantation forests is a controversial topic and concerns have been particularly expressed about potential harms to the environment. This paper, prepared by an international group of experts in silviculture, forest tree breeding, forest biotechnology and environmental risk assessment (ERA) that met in April 2012, examines how the ERA paradigm used for GE crop plants may be applied to GE trees for use in plantation forests. It emphasizes the importance of differentiating between ERA for confined field trials of GE trees, and ERA for unconfined or commercial-scale releases. In the case of the latter, particular attention is paid to characteristics of forest trees that distinguish them from shorter-lived plant species, the temporal and spatial scale of forests, and the biodiversity of the plantation forest as a receiving environment. © 2013 ILSI Research Foundation. Plant Biotechnology Journal published by Society for Experimental Biology, Association of Applied Biologists and John Wiley & Sons Ltd.

  8. Agglomeration, colloidal stability, and magnetic separation of magnetic nanoparticles: collective influences on environmental engineering applications

    Science.gov (United States)

    Yeap, Swee Pin; Lim, JitKang; Ooi, Boon Seng; Ahmad, Abdul Latif

    2017-11-01

    Magnetic nanoparticles (MNPs) which exhibit magnetic and catalytic bifunctionalities have been widely accepted as one of the most promising nanoagents used in water purification processes. However, due to the magnetic dipole-dipole interaction, MNPs can easily lose their colloidal stability and tend to agglomerate. Thus, it is necessary to enhance their colloidal stability in order to maintain the desired high specific surface area. Meanwhile, in order to successfully utilize MNPs for environmental engineering applications, an effective magnetic separation technology has to be developed. This step is to ensure the MNPs that have been used for pollutant removal can be fully reharvested back. Unfortunately, it was recently highlighted that there exists a conflicting role between colloidal stability and magnetic separability of the MNPs, whereby the more colloidally stable the particle is, the harder for it to be magnetically separated. In other words, attaining a win-win scenario in which the MNPs possess both good colloidal stability and fast magnetic separation rate becomes challenging. Such phenomenon has to be thoroughly understood as the colloidal stability and the magnetic separability of MNPs play a pivotal role on affecting their effective implementation in water purification processes. Accordingly, it is the aim of this paper to provide reviews on (i) the colloidal stability and (ii) the magnetic separation of MNPs, as well as to provide insights on (iii) their conflicting relationship based on recent research findings. [Figure not available: see fulltext.

  9. Mercury removal at Idaho National Engineering and Environmental Laboratory's New Waste Calciner Facility

    International Nuclear Information System (INIS)

    Ashworth, S.C.

    2000-01-01

    Technologies were investigated to determine viable processes for removing mercury from the calciner (NWCF) offgas system at the Idaho National Engineering and Environmental Laboratory. Technologies for gas phase and aqueous phase treatment were evaluated. The technologies determined are intended to meet EPA Maximum Achievable Control Technology (MACT) requirements under the Clean Air Act and Resource Conservation and Recovery Act (RCRA). Currently, mercury accumulation in the calciner off-gas scrubbing system is transferred to the tank farm. These transfers lead to accumulation in the liquid heels of the tanks. The principal objective for aqueous phase mercury removal is heel mercury reduction. The system presents a challenge to traditional methods because of the presence of nitrogen oxides in the gas phase and high nitric acid in the aqueous scrubbing solution. Many old and new technologies were evaluated including sorbents and absorption in the gas phase and ion exchange, membranes/sorption, galvanic methods, and UV reduction in the aqueous phase. Process modifications and feed pre-treatment were also evaluated. Various properties of mercury and its compounds were summarized and speciation was predicted based on thermodynamics. Three systems (process modification, NOxidizer combustor, and electrochemical aqueous phase treatment) and additional technology testing were recommended

  10. American Indians, hunting and fishing rates, risk, and the Idaho National Engineering and Environmental Laboratory

    International Nuclear Information System (INIS)

    Burger, J.

    1999-01-01

    Hunting, fishing, and recreational rates of 276 American Indians attending a festival at Fort Hall, near the Idaho National Engineering and Environmental Laboratory (INEEL), were examined. Nearly half of the sample lived on the Fort Hall Reservation, and half were American Indians from elsewhere in the western United States. An additional 44 White people attending the festival were also interviewed. The hypothesis that there are differences in hunting, fishing, and recreational rates as a function of tribal affiliation, educational level, gender, and age was examined. Information on hunting and fishing rates are central for understanding potential exposure scenarios for American Indians if the Department of Energy's INEEL lands are ever opened to public access, and the data are important because of the existence of tribal treaties that govern the legal and cultural rights of the Shoshone-Bannock regarding INEEL lands. Variations in hunting, fishing, and photography rates were explained by tribal affiliation (except fishing), gender, age, and schooling. Hunting rates were significantly higher for Indians (both those living on Fort Hall and others) than Whites. Men engaged in significantly higher rates of outdoor activities than women (except for photography). Potential and current hunting and fishing on and adjacent to INEEL was more similar among the local Whites and Fort Hall Indians than between these two groups and other American Indians

  11. Mercury Removal at Idaho National Engineering and Environmental Laboratory's New Waste Calcining Facility

    Energy Technology Data Exchange (ETDEWEB)

    Ashworth, Samuel Clay; Wood, R. A.; Taylor, D. D.; Sieme, D. D.

    2000-03-01

    Technologies were investigated to determine viable processes for removing mercury from the calciner (NWCF) offgas system at the Idaho National Engineering and Environmental Laboratory. Technologies for gas phase and aqueous phase treatment were evaluated. The technologies determined are intended to meet EPA Maximum Achievable Control Technology (MACT) requirements under the Clean Air Act and Resource Conservation and Recovery Act (RCRA). Currently, mercury accumulation in the calciner off-gas scrubbing system is transferred to the tank farm. These transfers lead to accumulation in the liquid heels of the tanks. The principal objective for aqueous phase mercury removal is heel mercury reduction. The system presents a challenge to traditional methods because of the presence of nitrogen oxides in the gas phase and high nitric acid in the aqueous scrubbing solution. Many old and new technologies were evaluated including sorbents and absorption in the gas phase and ion exchange, membranes/sorption, galvanic methods, and UV reduction in the aqueous phase. Process modifications and feed pre-treatment were also evaluated. Various properties of mercury and its compounds were summarized and speciation was predicted based on thermodynamics. Three systems (process modification, NOxidizer combustor, and electrochemical aqueous phase treatment) and additional technology testing were recommended.

  12. Mercury removal at Idaho National Engineering and Environmental Laboratory's New Waste Calcining Facility

    Energy Technology Data Exchange (ETDEWEB)

    S. C. Ashworth

    2000-02-27

    Technologies were investigated to determine viable processes for removing mercury from the calciner (NWCF) offgas system at the Idaho National Engineering and Environmental Laboratory. Technologies for gas phase and aqueous phase treatment were evaluated. The technologies determined are intended to meet EPA Maximum Achievable Control Technology (MACT) requirements under the Clean Air Act and Resource Conservation and Recovery Act (RCRA). Currently, mercury accumulation in the calciner off-gas scrubbing system is transferred to the tank farm. These transfers lead to accumulation in the liquid heels of the tanks. The principal objective for aqueous phase mercury removal is heel mercury reduction. The system presents a challenge to traditional methods because of the presence of nitrogen oxides in the gas phase and high nitric acid in the aqueous scrubbing solution. Many old and new technologies were evaluated including sorbents and absorption in the gas phase and ion exchange, membranes/sorption, galvanic methods, and UV reduction in the aqueous phase. Process modifications and feed pre-treatment were also evaluated. Various properties of mercury and its compounds were summarized and speciation was predicted based on thermodynamics. Three systems (process modification, NOxidizer combustor, and electrochemical aqueous phase treatment) and additional technology testing were recommended.

  13. The Idaho National Engineering Laboratory Site environmental report for calendar Year 1990

    International Nuclear Information System (INIS)

    Hoff, D.L.; Mitchell, R.G.; Moore, R.; Shaw, R.M.

    1991-06-01

    The results of the various monitoring programs for 1990 indicate that most radioactivity from the Idaho National Engineering Laboratory (INEL) operations could not be distinguished from worldwide fallout and natural radioactivity in the region surrounding the INEL Site. Although some radioactive materials were discharged during Site operations, concentrations and doses to the surrounding population were of no health consequence and were far less than State of Idaho and Federal health protection guidelines. The first section of the report summarizes Calendar Year 1990 and January 1 through April 1, 1991, INEL activities related to compliance with environmental regulations and laws. The balance of the report describes the surveillance program, the collection of foodstuffs at the INEL boundary and distant offsite locations, and the collection of air and water samples at onsite locations and offsite boundary and distant locations. The report also compares and evaluates the sample results and discusses implications, if any. Nonradioactive and radioactive effluent monitoring at the Site, and the US Geological Survey (USGS) ground-water monitoring program are also summarized. 33 refs., 18 figs., 29 tabs

  14. Adaptation of Advanced Diesel Engines for Military Requirements Under Severe Environmental Conditions

    National Research Council Canada - National Science Library

    Henein, Naeim A; Taraza, Dinu; Chalhoub, Nabil

    2004-01-01

    .... The second area is to examine the different control strategies used in advanced diesel engines to meet the emission goals and their effect on engine performance, fuel economy and exhaust emissions...

  15. Validation of the GPU-Accelerated CFD Solver ELBE for Free Surface Flow Problems in Civil and Environmental Engineering

    Directory of Open Access Journals (Sweden)

    Christian F. Janßen

    2015-07-01

    Full Text Available This contribution is dedicated to demonstrating the high potential and manifold applications of state-of-the-art computational fluid dynamics (CFD tools for free-surface flows in civil and environmental engineering. All simulations were performed with the academic research code ELBE (efficient lattice boltzmann environment, http://www.tuhh.de/elbe. The ELBE code follows the supercomputing-on-the-desktop paradigm and is especially designed for local supercomputing, without tedious accesses to supercomputers. ELBE uses graphics processing units (GPU to accelerate the computations and can be used in a single GPU-equipped workstation of, e.g., a design engineer. The code has been successfully validated in very different fields, mostly related to naval architecture and mechanical engineering. In this contribution, we give an overview of past and present applications with practical relevance for civil engineers. The presented applications are grouped into three major categories: (i tsunami simulations, considering wave propagation, wave runup, inundation and debris flows; (ii dam break simulations; and (iii numerical wave tanks for the calculation of hydrodynamic loads on fixed and moving bodies. This broad range of applications in combination with accurate numerical results and very competitive times to solution demonstrates that modern CFD tools in general, and the ELBE code in particular, can be a helpful design tool for civil and environmental engineers.

  16. HISTORICAL AMERICAN ENGINEERING RECORD - IDAHO NATIONAL ENGINEERING AND ENVIRONMENTAL LABORATORY, TEST AREA NORTH, HAER NO. ID-33-E

    Energy Technology Data Exchange (ETDEWEB)

    Susan Stacy; Hollie K. Gilbert

    2005-02-01

    Test Area North (TAN) was a site of the Aircraft Nuclear Propulsion (ANP) Project of the U.S. Air Force and the Atomic Energy Commission. Its Cold War mission was to develop a turbojet bomber propelled by nuclear power. The project was part of an arms race. Test activities took place in five areas at TAN. The Assembly & Maintenance area was a shop and hot cell complex. Nuclear tests ran at the Initial Engine Test area. Low-power test reactors operated at a third cluster. The fourth area was for Administration. A Flight Engine Test facility (hangar) was built to house the anticipated nuclear-powered aircraft. Experiments between 1955-1961 proved that a nuclear reactor could power a jet engine, but President John F. Kennedy canceled the project in March 1961. ANP facilities were adapted for new reactor projects, the most important of which were Loss of Fluid Tests (LOFT), part of an international safety program for commercial power reactors. Other projects included NASA's Systems for Nuclear Auxiliary Power and storage of Three Mile Island meltdown debris. National missions for TAN in reactor research and safety research have expired; demolition of historic TAN buildings is underway.

  17. A national environmental/energy workforce assessment. Post-secondary education profile: composite i (cont'd) (environmental engineering/health). Final report on phase 2

    International Nuclear Information System (INIS)

    1978-12-01

    This study is one of 16 volumes aggregating data on representative environmental education offerings in the United States at post-secondary education institutions and in the private sector of the economy. Structured around on-site interviews, the study describes the institutions' education programs--their program structure, representative course offerings, faculty structure, and program requirements. In addition, the study provides information on the employment history of graduates. Designed as Phase II of a three-phase program, the study presents the information on schools with emphasis on environmental engineering/health. The study is an overview. It doesn't include all environmental programs in the United States, and it makes no attempt to evaluate the program offerings

  18. A national environmental/energy workforce assessment. Post-secondary education profile: composite i (environmental engineering/health). Final report on phase 2

    International Nuclear Information System (INIS)

    1978-12-01

    This study is one of 16 volumes aggregating data on representative environmental education offerings in the United States at post-secondary education institutions and in the private sector of the economy. Structured around on-site interviews, the study describes the institutions' education programs--their program structure, representative course offerings, faculty structure, and program requirements. In addition, the study provides information on the employment history of graduates. Designed as Phase II of a three-phase program, the study presents the information on schools with emphasis on environmental engineering/health. The study is an overview. It doesn't include all environmental programs in the United States, and it makes no attempt to evaluate the program offerings

  19. The inventions technology on water resources to support environmental engineering based infrastructure

    Science.gov (United States)

    Sunjoto, S.

    2017-03-01

    Since the Stockholm Declaration, declared on the United Nation Conference on the Human Environment in Sweden on 5-16 June 1972 and attended the 113 country delegations, all the infrastructure construction should comply the sustainable development. As a consequence, almost research and studies were directing to the environmental aspect of construction including on water resources engineering. This paper will present the inventions which are very useful for the design of infrastructure, especially on the Groundwater engineering. This field has been rapidly developed since the publication of the well known law of flow through porous materials by Henri Darcy in 1856 on his book "Les fontaine publiques de la ville de Dijon". This law states that the discharge through porous media is proportional to the product of the hydraulic gradient, the cross-sectional area normal to the flow and the coefficient of permeability of the material. Forchheimer in 1930 developed a breakthrough formula by simplifying solution in a steady state flow condition especially in the case of radial flow to compute the permeability coefficient of casing hole or tube test with zero inflow discharge. The outflow discharge on the holes is equal to shape factor of tip of casing (F) multiplied by coefficient of permeability of soils (K) and multiplied by hydraulic head (H). In 1988, Sunjoto derived an equation in unsteady state flow condition based on this formula. In 2002, Sunjoto developed several formulas of shape factor as the parameters of the equation. In the beginning this formula is implemented to compute for the dimension of recharge well as the best method of water conservation for the urban area. After a long research this formula can be implemented to compute the drawdown on pumping or coefficient of permeability of soil by pumping test. This method can substitute the former methods like Theis (1935), Cooper-Jacob (1946), Chow (1952), Glover (1966), Papadopulos-Cooper (1967), Todd (1980

  20. Idaho National Engineering and Environmental Laboratory Site Report on the Production and Use of Recycled Uranium

    Energy Technology Data Exchange (ETDEWEB)

    L. C. Lewis; D. C. Barg; C. L. Bendixsen; J. P. Henscheid; D. R. Wenzel; B. L. Denning

    2000-09-01

    Recent allegations regarding radiation exposure to radionuclides present in recycled uranium sent to the gaseous diffusion plants prompted the Department of Energy to undertake a system-wide study of recycled uranium. Of particular interest, were the flowpaths from site to site operations and facilities in which exposure to plutonium, neptunium and technetium could occur, and to the workers that could receive a significant radiation dose from handling recycled uranium. The Idaho National Engineering and Environmental Laboratory site report is primarily concerned with two locations. Recycled uranium was produced at the Idaho Chemical Processing Plant where highly enriched uranium was recovered from spent fuel. The other facility is the Specific Manufacturing Facility (SMC) where recycled, depleted uranium is manufactured into shapes for use by their customer. The SMC is a manufacturing facility that uses depleted uranium metal as a raw material that is then rolled and cut into shapes. There are no chemical processes that might concentrate any of the radioactive contaminant species. Recyclable depleted uranium from the SMC facility is sent to a private metallurgical facility for recasting. Analyses on the recast billets indicate that there is no change in the concentrations of transuranics as a result of the recasting process. The Idaho Chemical Processing Plant was built to recover high-enriched uranium from spent nuclear fuel from test reactors. The facility processed diverse types of fuel which required uniquely different fuel dissolution processes. The dissolved fuel was passed through three cycles of solvent extraction which resulted in a concentrated uranyl nitrate product. For the first half of the operating period, the uranium was shipped as the concentrated solution. For the second half of the operating period the uranium solution was thermally converted to granular, uranium trioxide solids. The dose reconstruction project has evaluated work exposure and

  1. HIGH LEVEL WASTE TANK CLOSURE PROJECT AT THE IDAHO NATIONAL ENGINEERING AND ENVIRONMENTAL LABORATORY

    International Nuclear Information System (INIS)

    Quigley, K.D.; Wessman, D.

    2003-01-01

    The Department of Energy, Idaho Operations Office (DOE-ID) is in the process of closing two underground high-level waste (HLW) storage tanks at the Idaho National Engineering and Environmental Laboratory (INEEL) to meet Resource Conservation and Recovery Act (RCRA) regulations and Department of Energy orders. Closure of these two tanks is scheduled for 2004 as the first phase in closure of the eleven 1.14 million liter (300,000 gallon) tanks currently in service at the Idaho Nuclear Technology and Engineering Center (INTEC). The INTEC Tank Farm Facility (TFF) Closure sequence consists of multiple steps to be accomplished through the existing tank riser access points. Currently, the tank risers contain steam and process waste lines associated with the steam jets, corrosion coupons, and liquid level indicators. As necessary, this equipment will be removed from the risers to allow adequate space for closure equipment and activities. The basic tank closure sequence is as follows: Empty the tank to the residual heel using the existing jets; Video and sample the heel; Replace steam jets with new jet at a lower position in the tank, and remove additional material; Flush tank, piping and secondary containment with demineralized water; Video and sample the heel; Evaluate decontamination effectiveness; Displace the residual heel with multiple placements of grout; and Grout piping, vaults and remaining tank volume. Design, development, and deployment of a remotely operated tank cleaning system were completed in June 2002. The system incorporates many commercially available components, which have been adapted for application in cleaning high-level waste tanks. The system is cost-effective since it also utilizes existing waste transfer technology (steam jets), to remove tank heel solids from the tank bottoms during the cleaning operations. Remotely operated directional spray nozzles, automatic rotating wash balls, video monitoring equipment, decontamination spray-rings, and

  2. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement

    International Nuclear Information System (INIS)

    1994-06-01

    The US Department of Energy (DOE) is engaged in two related decision making processes concerning: (1) the transportation, receipt, processing, and storage of spent nuclear fuel (SNF) at the DOE Idaho National Engineering Laboratory (INEL) which will focus on the next 10 years; and (2) programmatic decisions on future spent nuclear fuel management which will emphasize the next 40 years. DOE is analyzing the environmental consequences of these spent nuclear fuel management actions in this two-volume Environmental Impact Statement (EIS). Volume 1 supports broad programmatic decisions that will have applicability across the DOE complex and describes in detail the purpose and need for this DOE action. Volume 2 is specific to actions at the INEL. This document, which limits its discussion to the Savannah River Site (SRS) spent nuclear fuel management program, supports Volume 1 of the EIS. Following the introduction, Chapter 2 contains background information related to the SRS and the framework of environmental regulations pertinent to spent nuclear fuel management. Chapter 3 identifies spent nuclear fuel management alternatives that DOE could implement at the SRS, and summarizes their potential environmental consequences. Chapter 4 describes the existing environmental resources of the SRS that spent nuclear fuel activities could affect. Chapter 5 analyzes in detail the environmental consequences of each spent nuclear fuel management alternative and describes cumulative impacts. The chapter also contains information on unavoidable adverse impacts, commitment of resources, short-term use of the environment and mitigation measures

  3. Environmental Management Plan for the Chemical Engineering Laboratory (LIQ of the National University of Colombia, Bogotá

    Directory of Open Access Journals (Sweden)

    Javier Gama Chávez

    2004-01-01

    Full Text Available An Enviromental Management Plan was formulated with the objective of improving the environmental performance of the Chemical Engineering Laboratory (LIQ. The plan was supported on the principles established by the ISO 140001 standard. In a first step, an environmental politic was proposed. Next, by means of an initial review of the laboratory, the most significant impacts related to the activities developed in the Laboratory were identified: dangerous chemical wastes accumulation, water contamination by effusions generation and air contamination. These impacts were the base for formulating following and control programs, furthermire, a training an communication program was done. All the programs, including the requiered documents and procedures, were published in the Environmental Management Plan and the Environmental Procedures Manual.

  4. Harnessing the Environmental Professional Expertise of Engineering Students--The Course: "Environmental Management Systems in the Industry"

    Science.gov (United States)

    Ben-Zvi-Assaraf, Orit; Ayal, Nitzan

    2010-01-01

    More and more technical universities now advocate integrating sustainability in higher education and including it as a strategic goal for improving education's quality and relevance to society. This study examines 30 fourth-year chemical engineering students, graduates of a university course designed to combine their terminological domain with…

  5. Tradeoff Study between Cost and Environmental Impact of Aircraft Using Simultaneous Optimization of Airframe and Engine Cycle

    Directory of Open Access Journals (Sweden)

    Xiao Chai

    2017-01-01

    Full Text Available To investigate more efficient aircraft configurations which have less environmental impact, this paper develops a multidisciplinary analysis framework integrated with the airframe and propulsion analysis modules. The characteristics for propulsion, aerodynamics, weight, performance, cost, emissions, and noise can be rapidly predicted by the framework. The impact of propulsion installation with large diameter engines on aircraft weight and drag are considered in the framework. A wide-body aircraft was taken as an example for the optimization to investigate the tradeoffs between the cost metric and the environmental performance metrics. Several cases for single objective and multiobjective optimizations were performed. In the single objective optimizations, the direct operating cost, the cumulative noise, the oxides of nitrogen emissions during landing-takeoff cycle, and the mission oxides of nitrogen emissions were considered as an objective and minimized, respectively. The different objectives resulted in designs with different airframe parameters and engine cycle parameters. In the multiobjective optimizations, the direct operating costs and environmental performances were considered as the objectives simultaneously. The optimization results were the Pareto fronts for the minimum direct operating costs and environmental performances, which illustrate the quantitative relationships between the economic metric and the environmental performances.

  6. Building an integrated nuclear engineering and nuclear science human resources pipeline at the Idaho National Engineering and Environmental Laboratory

    International Nuclear Information System (INIS)

    Sneed, A.; Sikorski, B.; Lineberry, M.; Jolly, J.

    2004-01-01

    Full text: In 2002, the US Department of Energy (US DOE) transferred sponsorship of the INEEL and ANL-W to the DOE Office of Nuclear Energy, Science and Technology and designated the INEEL and ANL-W as the nation's lead laboratories for nuclear reactor and nuclear fuel cycle research and development. This transfer acknowledged the laboratories' history, infrastructure, expertise and commitment to collaborate broadly in order to fulfill its assigned role as the nation's center for nuclear energy research and development. Key to this role is the availability of well-educated and trained nuclear engineers, professionals from other disciplines of engineering, nuclear scientists, and others with advanced degrees in supporting disciplines such as physics, chemistry, and math. In 2005 the INEEL and ANL-W will be combined into the Idaho National Laboratory (INL). One of US DOE's objectives for the INL will be for it to take a strong role in the revitalization of nuclear engineering and nuclear science education in the US. Responding to this objective for the INL and the national need to rejuvenate nuclear engineering and nuclear science research and education, ISU, University of Idaho (UI), Boise State University, the INEEL, and ANL-W are all supporting a new Institute of Nuclear Science and Engineering (INSE), initially proposed by and to be administered by ISU. The Institute will rely on the resources of both universities and the INL to create a US center for reactor and fuel cycle research to development and attract outstanding faculty and students to Idaho and to the INL. The Institute and other university based education development efforts represent only one component of a viable Human Resources Pipeline from university to leading edge laboratory researcher. Another critical component is the successful integration of new graduates into the laboratory research environment, the transfer of knowledge from senior researchers, and the development of these individuals into

  7. Internal Evaluation of the Department of Environmental Health Engineering of Qom University of Medical Sciences, 2010

    Directory of Open Access Journals (Sweden)

    Hassan Izanloo

    2013-07-01

    Full Text Available Background and Objectives: Improvement of education quality of a university depends on the quality improvement of its departments. Therefore, internal evaluation of the department is an effective step in the quality growth of higher education system. The present study was performed aiming at internal evaluation of the Department of Environmental Health Engineering of the Qom University of Medical Sciences in 2010 took place. Methods: This study was done using a descriptive cross-sectional method. Four questionnaires, including department manager, faculty members, students, and graduates were used to collect the data. In completing these questionnaires, interviews, observations and review of documents were also done, and they were interpreted and concluded by employing descriptive statistics in the form of frequency distributions and measures of central tendency and dispersion.Results: The scores obtained for the goals and mission, management, and development of the department were 2.2, 2.1, and 2.82, respectively; the ratio of the number of faculty members to students, faculty members’ research activities, and satisfaction of the department were 2.23, 2.1, and 1.12, respectively; the ratio of the number of the students to the existing facilities, and awareness of the goals and missions of the department were 2.1, 1.75, respectively; and the ratio of the courses to the need of the graduates, satisfaction of the educational programs, and satisfaction of the content of the department programs were 1.68, 1.84, and 2.1, respectively.Conclusion: According to the results of this research, there is necessary that university departments attempt to protect and promote the factors, which are in ideal conditions and plan to improve the adverse factors. University officials should provide necessary conditions and resources to improve the present situation and achieve the most desirable level.

  8. Environmental effects of using Methanol as a biofuel into the combustion chamber of a heavy-duty diesel engine

    OpenAIRE

    kianoosh shojae; Majid Mahdavian

    2016-01-01

    Methanol as a biofuel is an environmentally friendly substitute for pure diesel and can be obtained from biomasses. The use of biofuels such as methanol for the combustion process is associated with positive impacts on the environment. Using pure methanol or a blend of diesel/methanol fuel in motorized vehicles has been proposed by researchers. In this paper, pure methanol was injected into the combustion chamber of a ISM 370 HD diesel engine and the exhaust emissions were evaluated by using ...

  9. Support for the Symposium on the Application of Geophysics to Environmental and Engineering Problems, 2012-2014

    Science.gov (United States)

    2014-07-02

    SAGEEP 2014 experience at the Ice Breaker featuring refreshments and music entertainment. Everyone’s welcome at the opening SAGEEP event. ICE BREAKER...parameters in data acquisition and processing that influence the outcome of MASW surveys. With this information, practitioners will gain more confidence in...and environmental and engineering geophysicists. ASEG publishes a journal, Exploration Geophysics, jointly with SEG Japan and Korean SEG, and a

  10. Engineer Ethics

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dae Sik; Kim, Yeong Pil; Kim, Yeong Jin

    2003-03-15

    This book tells of engineer ethics such as basic understanding of engineer ethics with history of engineering as a occupation, definition of engineering and specialized job and engineering, engineer ethics as professional ethics, general principles of ethics and its limitation, ethical theory and application, technique to solve the ethical problems, responsibility, safety and danger, information engineer ethics, biotechnological ethics like artificial insemination, life reproduction, gene therapy and environmental ethics.

  11. Engineer Ethics

    International Nuclear Information System (INIS)

    Lee, Dae Sik; Kim, Yeong Pil; Kim, Yeong Jin

    2003-03-01

    This book tells of engineer ethics such as basic understanding of engineer ethics with history of engineering as a occupation, definition of engineering and specialized job and engineering, engineer ethics as professional ethics, general principles of ethics and its limitation, ethical theory and application, technique to solve the ethical problems, responsibility, safety and danger, information engineer ethics, biotechnological ethics like artificial insemination, life reproduction, gene therapy and environmental ethics.

  12. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement

    International Nuclear Information System (INIS)

    1994-06-01

    Two types of projects in the spent nuclear fuel and environmental restoration and waste management activities at the Idaho National Engineering Laboratory (INEL) are described. These are: foreseeable proposed projects where some funding for preliminary planning and/or conceptual design may already be authorized, but detailed design or planning will not begin until the Department of Energy (DOE) has determined that the requirements of the National Environmental Policy Act process for the project have been completed; planned or ongoing projects not yet completed but whose National Environmental Policy Act documentation is already completed or is expected to be completed before the Record of Decision for this Envirorunental Impact Statement (EIS) is issued. The section on project summaries describe the projects (both foreseeable proposed and ongoing).They provide specific information necessary to analyze the environmental impacts of these projects. Chapter 3 describes which alternative(s) each project supports. Summaries are included for (a) spent nuclear fuel projects, (b) environmental remediation projects, (c) the decontamination and decommissioning of surplus INEL facilities, (d) the construction, upgrade, or replacement of existing waste management facilities, (e) infrastructure projects supporting waste management activities, and (f) research and development projects supporting waste management activities

  13. Real-time environmental monitoring at the Japan Nuclear Cycle Development Institute O-arai Engineering Center. Using the internet to promote safety and environmental transparency

    International Nuclear Information System (INIS)

    Motomatsu, Sheila; Nakashima Inoue, Naoko

    2000-12-01

    The report documents the results of an effort at the Japan Nuclear Cycle Development Institute O-arai Engineering Center (JNC/OEC) to provide via the Internet, in real-time, environmental monitoring data to promote safety and environmental transparency. Provided in Japanese as well as in English, the Internet site provides assurance that OEC nuclear operations are being conducted in a manner that is safe to both people in the surrounding area and the environment. This work conducted by Environmental Monitoring Team of the OEC Safety Administration Section fulfilled the assignment to release data real-time via the Internet tasked by the Information Disclosure Section of the JNC Headquarters Public Relations Division. The work conducted by the visiting exchange scientist fulfilled the experimental portion of Action Sheet 34 of the Agreement between JNC and DOE for Cooperation in Research and Development Concerning Nuclear Material Control and Accounting Measures for Safeguards and Nonproliferation. In Japan, the project for Action Sheet 34 Personnel Exchange on Remote Monitoring and Transparency' entailed both a study and an experiment on how remote monitoring technologies can be used to promote nonproliferation, environmental and safety transparency. Environmental airborne radionuclide monitoring falls under the definition of remote monitoring technology more broadly defined as 'remotely accessed unattended monitoring system technology'. (author)

  14. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement. Volume 2, Part B

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    Two types of projects in the spent nuclear fuel and environmental restoration and waste management activities at the Idaho National Engineering Laboratory (INEL) are described. These are: foreseeable proposed projects where some funding for preliminary planning and/or conceptual design may already be authorized, but detailed design or planning will not begin until the Department of Energy (DOE) has determined that the requirements of the National Environmental Policy Act process for the project have been completed; planned or ongoing projects not yet completed but whose National Environmental Policy Act documentation is already completed or is expected to be completed before the Record of Decision for this Envirorunental Impact Statement (EIS) is issued. The section on project summaries describe the projects (both foreseeable proposed and ongoing).They provide specific information necessary to analyze the environmental impacts of these projects. Chapter 3 describes which alternative(s) each project supports. Summaries are included for (a) spent nuclear fuel projects, (b) environmental remediation projects, (c) the decontamination and decommissioning of surplus INEL facilities, (d) the construction, upgrade, or replacement of existing waste management facilities, (e) infrastructure projects supporting waste management activities, and (f) research and development projects supporting waste management activities.

  15. INL Site Portion of the April 1995 Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Mamagement Programmatic Final Environmental Impact Statement

    Energy Technology Data Exchange (ETDEWEB)

    N/A

    2005-06-30

    In April 1995, the Department of Energy (DOE) and the Department of the Navy, as a cooperating agency, issued the Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Final Environmental Impact Statement (1995 EIS). The 1995 EIS analyzed alternatives for managing The Department's existing and reasonably foreseeable inventories of spent nuclear fuel through the year 2035. It also included a detailed analysis of environmental restoration and waste management activities at the Idaho National Engineering and Environmental Laboratory (INEEL). The analysis supported facility-specific decisions regarding new, continued, or planned environmental restoration and waste management operations. The Record of Decision (ROD) was signed in June 1995 and amended in February 1996. It documented a number of projects or activities that would be implemented as a result of decisions regarding INL Site operations. In addition to the decisions that were made, decisions on a number of projects were deferred or projects have been canceled. DOE National Environmental Policy Act (NEPA) implementing procedures (found in 10 CFR Part 1 021.330(d)) require that a Supplement Analysis of site-wide EISs be done every five years to determine whether the site-wide EIS remains adequate. While the 1995 EIS was not a true site-wide EIS in that several programs were not included, most notably reactor operations, this method was used to evaluate the adequacy of the 1995 EIS. The decision to perform a Supplement Analysis was supported by the multi-program aspect of the 1995 EIS in conjunction with the spirit of the requirement for periodic review. The purpose of the SA is to determine if there have been changes in the basis upon which an EIS was prepared. This provides input for an evaluation of the continued adequacy of the EIS in light of those changes (i.e., whether there are substantial changes in the proposed

  16. Annual report 2005 - 2006. Laboratory of Energy Engineering and Environmental Protection

    Energy Technology Data Exchange (ETDEWEB)

    Maekinen, A.; Savolahti, M. (eds.)

    2007-07-01

    Energy conversion has a major impact on our environment, on the local environment and globally. The core research at the Laboratory of Energy Engineering and Environmental Protection (ENY) is environmental friendly energy conversion. We participate in many research projects at national and international levels. Our research is always done in close collaboration with the industry. In addition to creative thinking, dialogue with industry is one of the most important factors for effective research in technical fields. This makes it possible to ensure that the research will also produce economical benefits for industry. The research fields of the laboratory are moving with the time in the direction of finding new forms of energy conversion and minimizing the effect on the environment. Research on Co{sub 2} capture and storage is increasing worldwide and also ENY participates in international research project focusing on minimizing greenhouse gas emission. In the past years we have been focusing on how to integrate Co{sub 2} capture into industrial processes to produce useful products for the industry. The production of PCC by carbonating slag from metallurgy processes seems to be very promising. The bulk of our research can be classified into four groups: Energy systems, Spraying and combustion, Thermal treatment of waste and CO{sub 2} capture and storage. We have been partners in the Nordic energy research in the field of Co{sub 2} capture and storage and in the EU project 'ToMeRed' on toxic trace elements emission control. We are the operating agent for the IEA research project: 'IEA-DHC Annex VIII - proved cogeneration and heat utilization in DH networks'. We represent Finland in EFCE working part on Multiphase fluid flow, European Multiphase Systems Institute and we represent our university in IFRF Finland. Ron Zevenhoven was a Lead Author for a special report on Co{sub 2} capture and storage by the IPCC published in 2005. We have been

  17. A software engineering perspective on environmental modeling framework design: The object modeling system

    Science.gov (United States)

    The environmental modeling community has historically been concerned with the proliferation of models and the effort associated with collective model development tasks (e.g., code generation, data provisioning and transformation, etc.). Environmental modeling frameworks (EMFs) have been developed to...

  18. Potential Health and Environmental Risks of Three-Dimensional Engineered Polymers

    NARCIS (Netherlands)

    De Almeida Monteiro Melo Ferraz, Marcia; Henning, Heiko H.W.; Da Costa, Pedro Ferreira; Malda, Jos; Le Gac, Séverine; Bray, Fabrice; Van Duursen, Majorie B.M.; Brouwers, Jos F.; Van De Lest, Chris H.A.; Bertijn, Ingeborg; Kraneburg, Lisa; Vos, Peter L.A.M.; Stout, Tom A.E.; Gadella, Barend M.

    2018-01-01

    Polymer engineering, such as in three-dimensional (3D) printing, is rapidly gaining popularity, not only in the scientific and medical fields but also in the community in general. However, little is known about the toxicity of engineered materials. Therefore, we assessed the toxicity of 3D-printed

  19. Short-Term and Long-Term Technology Needs/Matching Status at Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    S. L. Claggett

    1999-12-01

    This report identifies potential technology deployment opportunities for the Environmental Management (EM) programs at the Idaho National Engineering and Environmental Laboratory (INEEL). The focus is on identifying candidates for Accelerated Site Technology Deployment (ASTD) proposals within the Environmental Restoration and Waste Management areas. The 86 technology needs on the Site Technology Coordination Group list were verified in the field. Six additional needs were found, and one listed need was no longer required. Potential technology matches were identified and then investigated for applicability, maturity, cost, and performance. Where promising, information on the technologies was provided to INEEL managers for evaluation. Eleven potential ASTD projected were identified, seven for near-term application and four for application within the next five years.

  20. LCA as an environmental technology development performance indicator of engineered nano-materials and their application in polymers

    DEFF Research Database (Denmark)

    Miseljic, Mirko; Olsen, Stig Irving; Hauschild, Michael Zwicky

    Engineered nano‐material (ENM) application in products has in recent years developed to an important market segment but with rising environmental concerns, as the environmental life cycle impacts, especially toxicity of nanoparticles, are not assessed. Life cycle assessment (LCA) is a holistic tool......’s with functionalities of flame retardancy, UV protection and antimicrobial properties through functionalized Mg(OH)2, ZnO and Ag nanoparticles. The aim is also to apply the ENM’s in plastic and wood‐plastic matrixes and thereby develop products that have a new and improved way of attaining these properties, compared...... to assess products and systems, but current knowledge about the development of ENM’s environmental impacts is too scarce to be included for application within the LCA framework. In the EUFP7 project MINANO the aim is to develop an efficient, continuous method of large‐scale, low cost synthesis of ENM...

  1. Short-Term and Long-Term Technology Needs/Matching Status at Idaho National Engineering and Environmental Laboratory

    International Nuclear Information System (INIS)

    Claggett, S.L.

    1999-01-01

    This report identifies potential technology deployment opportunities for the Environmental Management (EM) programs at the Idaho National Engineering and Environmental Laboratory (INEEL). The focus is on identifying candidates for Accelerated Site Technology Deployment (ASTD) proposals within the Environmental Restoration and Waste Management areas. The 86 technology needs on the Site Technology Coordination Group list were verified in the field. Six additional needs were found, and one listed need was no longer required. Potential technology matches were identified and then investigated for applicability, maturity, cost, and performance. Where promising, information on the technologies was provided to INEEL managers for evaluation. Eleven potential ASTD projected were identified, seven for near-term application and four for application within the next five years

  2. Concrete release protocol case studies for decommissioning work at the Idaho National Engineering and Environmental Laboratory

    International Nuclear Information System (INIS)

    Kamboj, S.; Arnish, J.; Chen, S-Y; Parker, F. L.; Phillips, A. M.; Tripp, J. L.; Meservey, R. H.

    2000-01-01

    The US Department of Energy (DOE) Order 5400.5, ''Radiation Protection of the Public and Environment'' contains provisions pertinent to releasing potentially radioactive materials from DOE facilities for reuse or recycle. A process of authorized release for materials recovered from radiation areas is permitted under Order 5400.5 and the proposed rule in Title 10, Part 834, of the Code of Federal Regulations (10 CFR Part 834). A generic disposition protocol to facilitate release of concrete under these provisions has been developed. This report analyzes the application of that generic protocol to site-specific cases at the Idaho National Engineering and Environmental Laboratory (INEEL). The potential radiological doses and costs for several concrete disposition alternatives for the sewage treatment plant (STP) at the Central Facilities Area (CFA) of INEEL were evaluated in this analysis. Five disposition alternatives were analyzed for the concrete: (A) decontaminate, crush, and reuse; (B) crush and reuse without decontamination; (C) decontaminate, demolish, and dispose of at a nonradiological landfill; (D) demolish and dispose of at a nonradiological landfill without decontamination; and (E) demolish and dispose of at a low-level radioactive waste (LLW) facility. The analysis was performed for disposition of concrete from four INEEL structures: (1) trickle filter, (2) primary clarifier, (3) secondary clarifier, and (4) CFA-691 pumphouse for a generic case (based on default parameters from the disposition protocol) and an INEEL-specific case (based on INEEL-specific parameters). The results of the analysis indicated that Alternatives B and D would incur the lowest cost and result in a dose less than 1 mrem/yr (except for the trickle filter, the dose for which was estimated at 1.9 mrem/yr) for nonradiological workers. The analysis indicated that the main contributor to the radiological dose would be cobalt-60 contamination in the concrete. A characterization conducted

  3. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs, Draft Environmental Impact Statement

    International Nuclear Information System (INIS)

    1994-06-01

    Volume 1 to the Department of Energy's Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Management Programs Environmental Impact Statement evaluates a range of alternatives for managing naval spent nuclear fuel expected to be removed from US Navy nuclear-powered vessels and prototype reactors through the year 2035. The Environmental Impact Statement (EIS) considers a range of alternatives for examining and storing naval spent nuclear fuel, including alternatives that terminate examination and involve storage close to the refueling or defueling site. The EIS covers the potential environmental impacts of each alternative, as well as cost impacts and impacts to the Naval Nuclear Propulsion Program mission. This Appendix covers aspects of the alternatives that involve managing naval spent nuclear fuel at four naval shipyards and the Naval Nuclear Propulsion Program Kesselring Site in West Milton, New York. This Appendix also covers the impacts of alternatives that involve examining naval spent nuclear fuel at the Expended Core Facility in Idaho and the potential impacts of constructing and operating an inspection facility at any of the Department of Energy (DOE) facilities considered in the EIS. This Appendix also considers the impacts of the alternative involving limited spent nuclear fuel examinations at Puget Sound Naval Shipyard. This Appendix does not address the impacts associated with storing naval spent nuclear fuel after it has been inspected and transferred to DOE facilities. These impacts are addressed in separate appendices for each DOE site

  4. Mechanical, thermo dynamical and environmental comparison of engines using natural gas and gasoline

    International Nuclear Information System (INIS)

    Agudelo S, John R; Bedoya C, Ivan D; Moreno S, Ricardo

    2005-01-01

    This paper shows experimental results of a Toyota Hilux 2400-swept volume, compression ratio 9:1 engine, operating with La Guajira natural gas and petrol. Also shows a thermodynamic study of those fuels in a normalized, variable compression ratio ASTM-CFR monocylinder engine. When using natural gas, Hilux engine increases its fuel consumption around 20% for the same power. Volumetric efficiency increases 10% and co emissions de- crease around 40%. When comparing thermodynamic parameters in CFR engine operating at a compression ratio of 9:1, it was found a 12,5% decrease in indicated power and 17% in maximum combustion pressure, which is proportional to temperature diminish of around 20%. Convective heat transfer coefficient decreases around 28% respect to petrol. First laminar combustion phase is duplicated when using the same spark advance as petrol; nevertheless this is maintained almost constant when spark is advancing 15 degrades over petrol spark advance

  5. Idaho National Engineering Laboratory Radiological Environmental Surveillance Program 1995 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Miles, M.; Wilhelmsen, R.N.; Borsella, B.W.; Wright, K.C.

    1996-08-01

    This report describes calendar year 1995 environmental surveillance activities of Environmental Monitoring and Water Resources of Lockheed Martin Idaho Technologies Company, performed at the following Waste Management Facilities: the Radioactive Waste Management Complex, the Waste Experimental Reduction Facility, the Mixed Waste Storage Facility, and tow surplus facilities. Results of the sampling performed by the Radiological Environmental Surveillance Program, Site Environmental Surveillance Program, and the United States Geological Survey at these facilities are included in this report. The primary purposes of monitoring are to evaluate environmental conditions, to provide and interpret data, to verify compliance with applicable regulations or standards and to ensure protection of human health and the environment. This report compares 1995 environmental surveillance data with US DOE Derived Concentration Guides and with data form previous years.

  6. Hydropower and Environmental Resource Assessment (HERA): a computational tool for the assessment of the hydropower potential of watersheds considering engineering and socio-environmental aspects.

    Science.gov (United States)

    Martins, T. M.; Kelman, R.; Metello, M.; Ciarlini, A.; Granville, A. C.; Hespanhol, P.; Castro, T. L.; Gottin, V. M.; Pereira, M. V. F.

    2015-12-01

    The hydroelectric potential of a river is proportional to its head and water flows. Selecting the best development alternative for Greenfield projects watersheds is a difficult task, since it must balance demands for infrastructure, especially in the developing world where a large potential remains unexplored, with environmental conservation. Discussions usually diverge into antagonistic views, as in recent projects in the Amazon forest, for example. This motivates the construction of a computational tool that will support a more qualified debate regarding development/conservation options. HERA provides the optimal head division partition of a river considering technical, economic and environmental aspects. HERA has three main components: (i) pre-processing GIS of topographic and hydrologic data; (ii) automatic engineering and equipment design and budget estimation for candidate projects; (iii) translation of division-partition problem into a mathematical programming model. By integrating an automatic calculation with geoprocessing tools, cloud computation and optimization techniques, HERA makes it possible countless head partition division alternatives to be intrinsically compared - a great advantage with respect to traditional field surveys followed by engineering design methods. Based on optimization techniques, HERA determines which hydro plants should be built, including location, design, technical data (e.g. water head, reservoir area and volume, engineering design (dam, spillways, etc.) and costs). The results can be visualized in the HERA interface, exported to GIS software, Google Earth or CAD systems. HERA has a global scope of application since the main input data area a Digital Terrain Model and water inflows at gauging stations. The objective is to contribute to an increased rationality of decisions by presenting to the stakeholders a clear and quantitative view of the alternatives, their opportunities and threats.

  7. Envisioning Nano Release Dynamics in a Changing World: Using Dynamic Probabilistic Modeling to Assess Future Environmental Emissions of Engineered Nanomaterials.

    Science.gov (United States)

    Sun, Tian Yin; Mitrano, Denise M; Bornhöft, Nikolaus A; Scheringer, Martin; Hungerbühler, Konrad; Nowack, Bernd

    2017-03-07

    The need for an environmental risk assessment for engineered nanomaterials (ENM) necessitates the knowledge about their environmental emissions. Material flow models (MFA) have been used to provide predicted environmental emissions but most current nano-MFA models consider neither the rapid development of ENM production nor the fact that a large proportion of ENM are entering an in-use stock and are released from products over time (i.e., have a lag phase). Here we use dynamic probabilistic material flow modeling to predict scenarios of the future flows of four ENM (nano-TiO 2 , nano-ZnO, nano-Ag and CNT) to environmental compartments and to quantify their amounts in (temporary) sinks such as the in-use stock and ("final") environmental sinks such as soil and sediment. In these scenarios, we estimate likely future amounts if the use and distribution of ENM in products continues along current trends (i.e., a business-as-usual approach) and predict the effect of hypothetical trends in the market development of nanomaterials, such as the emergence of a new widely used product or the ban on certain substances, on the flows of nanomaterials to the environment in years to come. We show that depending on the scenario and the product type affected, significant changes of the flows occur over time, driven by the growth of stocks and delayed release dynamics.

  8. THE WASTE REDUCTION (WAR) ALGORITHM: ENVIRONMENTAL IMPACTS, ENERGY CONSUMPTION, AND ENGINEERING ECONOMICS

    Science.gov (United States)

    A general theory known as the WAste Reduction (WAR) algorithm has been developed to describe the flow and the generation of potential environmental impact through a chemical process. This theory defines potential environmental impact indexes that characterize the generation and t...

  9. Geomatics contents: vertical coordination efforts within a new environmental engineering degree

    Science.gov (United States)

    Merino-de-Miguel, Silvia; Solana-Gutiérrez, Joaquín; Elena-Rosselló, Ramón; Palacios-Orueta, Alicia

    2014-05-01

    We are at the fourth year from starting a new degree in Natural Environmental Engineering (NEED) at the Technical University of Madrid (UPM). After three complete years, almost all the essential courses in the degree have been taught and it is time to summarize and check for any inconsistencies, gaps and overlaps. All the analyses are being carried out within a vertical coordination program that is required according to the rules imposed by the Spanish National Agency for Accreditation and Quality Assessment (ANECA) for official studies at University. Besides, in this case, a vertical coordination effort it is needed since this is a 4-year new degree never given in Spain before. Ideally, we will be able to detect any malfunctioning and make the required changes. Up to now, coordination efforts have been done in the frame of all the courses within a semester but never in the frame of the whole degree. The former were mainly horizontal coordination works, which have been carried out by six different commissions (one per semester), with the main objective of temporally coordinate teaching activities (including field trips), exams, and deliveries of essays and practical works. However, few efforts have been done in a thematic or vertical sense. The main objectives of the vertical coordination program are: (i) to make a diagnosis of the degree of thematic, the thematic schedule and temporal reliability of all the courses as a whole within NEED, (ii) to reveal any possible malfunctioning that should be taken into account and solve as soon as possible, and (iii) to monitor during the next two years the way all the proposed changes will be implemented and the expected results. The present work shows some results concerning the first of the given objectives with special focus on all the courses related to geomatics contents. The first objective was to make a diagnosis of the degree of thematic and temporal reliability of all the courses with geomatics contents as a whole

  10. Idaho National Engineering and Environmental Laboratory, Old Waste Calcining Facility, Scoville vicinity, Butte County, Idaho -- Photographs, written historical and descriptive data. Historical American engineering record

    International Nuclear Information System (INIS)

    1997-01-01

    This report describes the history of the Old Waste Calcining Facility. It begins with introductory material on the Idaho National Engineering and Environmental Laboratory, the Materials Testing Reactor fuel cycle, and the Idaho Chemical Processing Plant. The report then describes management of the wastes from the processing plant in the following chapters: Converting liquid to solid wastes; Fluidized bed waste calcining process and the Waste Calcining Facility; Waste calcining campaigns; WCF gets a new source of heat; New Waste Calcining Facility; Last campaign; Deactivation and the RCRA cap; Significance/context of the old WCF. Appendices contain a photo key map for HAER photos, a vicinity map and neighborhood of the WCF, detailed description of the calcining process, and chronology of WCF campaigns

  11. 2-D Resistivity Assessment of Subsurface Characterization and its Engineering and Environmental Implications at SiLC

    Science.gov (United States)

    Nordiana, M. M.; Azwin, I. N.; Saad, Rosli; Jia, Teoh Ying; Anderson, A. B.; Tonnizam, Edy; Taqiuddin Zakaria, Muhamad

    2017-04-01

    The role of geophysics in Environmental Earth Sciences and Engineering is considered. In the developing era, geophysics has mainly contributed in investigation of new constructions such as tunnels, road, dams and high-rise buildings. This study was carried out to assess the foundation depths around a construction site in the Southern Industrial & Logistics Clusters (SiLC), Nusajaya, Johor using 2-D resistivity method. The 2-D resistivity method was carried out with a view to characterize different subsurface geological and to provide the engineering and environmental geophysical characterization of the study area. Measurements of eight 2-D resistivity profile using Pole-dipole array with 2 m minimum electrode spacing was taken with the use of ABEM Terrameter SAS4000 and ES10-64C selector. The results are presented as inversion model resistivity with the outline of the survey line. The inversion model resistivity from L1-L8 obtained is characterized by resistivity range of 1-8000 ohm-m. This range indicates the occurrence of silt, clay, sandy clay and sand whose ranges are; 10-100 ohm-m, 1-100 ohm-m, 100-800 ohm-m and 100-3000 ohm-m respectively. However, there was a boulder with range of >5000 ohm-m and saturated zone (1-20 ohm-m) which may indicate the weak zones of the study area. The 2-D resistivity method is not intended to replace borings, except in specific cases where information gathered would be sufficient to address the intended engineering and environmental purpose.

  12. Preliminary Hanford technical input for the Department of Energy programmatic spent nuclear fuel management and Idaho National Engineering Laboratory environmental restoration and waste management programs environmental impact statement

    International Nuclear Information System (INIS)

    Bergsman, K.H.

    1995-03-01

    The US Department of Energy (DOE) is currently evaluating its programmatic options for the safe management of its diverse spent nuclear fuel (SNF) inventory in the Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Environmental Impact Statement (SNF and INEL EIS). In the SNF and INEL EIS, the DOE is assessing five alternatives for SNF management, which consider at which of the DOE sites each of the various SNF types should be managed until ultimate disposition. The range of SNF inventories considered for management at the Hanford Site in the SNF and INEL EIS include the current Hanford Site inventory, only the current Hanford Site defense production SNF inventory, the DOE complex-wide SNF inventory, or none at all. Site-specific SNF management decisions will be evaluated in separate National Environmental Policy Act evaluations. Appendixes A and B include information on (1) additional facilities required to accommodate inventories of SNF within each management alternative, (2) existing and new SNF management facility descriptions, (3) facility costs for construction and operation, (4) facility workforce requirements for construction and operation, and (5) facility discharges. The information was extrapolated from existing analyses to the extent possible. New facility costs, manpower requirements, and similar information are based on rough-order-of-magnitude estimates

  13. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs draft environmental impact statement

    International Nuclear Information System (INIS)

    1994-06-01

    The US Department of Energy (DOE) has prepared this report to assist its management in making two decisions. The first decision, which is programmatic, is to determine the management program for DOE spent nuclear fuel. The second decision is on the future direction of environmental restoration, waste management, and spent nuclear fuel management activities at the Idaho National Engineering Laboratory. Volume 1 of the EIS, which supports the programmatic decision, considers the effects of spent nuclear fuel management on the quality of the human and natural environment for planning years 1995 through 2035. DOE has derived the information and analysis results in Volume 1 from several site-specific appendixes. Volume 2 of the EIS, which supports the INEL-specific decision, describes environmental impacts for various environmental restoration, waste management, and spent nuclear fuel management alternatives for planning years 1995 through 2005. This Appendix B to Volume 1 considers the impacts on the INEL environment of the implementation of various DOE-wide spent nuclear fuel management alternatives. The Naval Nuclear Propulsion Program, which is a joint Navy/DOE program, is responsible for spent naval nuclear fuel examination at the INEL. For this appendix, naval fuel that has been examined at the Naval Reactors Facility and turned over to DOE for storage is termed naval-type fuel. This appendix evaluates the management of DOE spent nuclear fuel including naval-type fuel

  14. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement

    International Nuclear Information System (INIS)

    1994-06-01

    The US Department of Energy (DOE) is currently deciding the direction of its environmental restoration and waste management programs at the Idaho National Engineering Laboratory (INEL) for the next 10 years. Pertinent to this decision is establishing policies for the environmentally sensitive and safe transport, storage, and management of spent nuclear fuels. To develop these policies, it is necessary to revisit or examine the available options. As a part of the DOE complex, the Hanford Site not only has a large portion of the nationwide DOE-owned inventory of spent nuclear fuel, but also is a participant in the DOE decision for management and ultimate disposition of spent nuclear fuel. Efforts in this process at Hanford include assessment of several options for stabilizing, transporting, and storing all or portions of DOE-owned spent nuclear fuel at the Hanford Site. Such storage and management of spent nuclear fuel will be in a safe and suitable manner until a final decision is made for ultimate disposition of spent nuclear fuel. Five alternatives involving the Hanford Site are being considered for management of the spent nuclear fuel inventory: (1) the No Action Alternative, (2) the Decentralization Alternative, (3) the 1992/1993 Planning Basis Alternative, (4) the Regionalization Alternative, and (5) the Centralization Alternative. AU alternatives will be carefully designed to avoid environmental degradation and to provide protection to human health and safety at the Hanford Site and surrounding region

  15. Environmental assessment of SP-100 ground engineering system test site: Hanford Site, Richland, Washington

    Energy Technology Data Exchange (ETDEWEB)

    1988-12-01

    The US Department of Energy (DOE) proposes to modify an existing reactor containment building (decommissioned Plutonium Recycle Test Reactor (PRTR) 309 Building) to provide ground test capability for the prototype SP-100 reactor. The 309 Building (Figure 1.1) is located in the 300 Area on the Hanford Site in Washington State. The National Environmental Policy Act (NEPA) requires that Federal agencies assess the potential impacts that their actions may have on the environment. This Environmental Assessment describes the consideration given to environmental impacts during reactor concept and test site selection, examines the environmental effects of the DOE proposal to ground test the nuclear subsystem, describes alternatives to the proposed action, and examines radiological risks of potential SP-100 use in space. 73 refs., 19 figs., 7 tabs.

  16. Engineering design of an environmental management system: A transdisciplinary response to the rhino poaching problem

    CSIR Research Space (South Africa)

    Roodt, H

    2014-10-01

    Full Text Available principles to address the wicked problems through appropriate research (analytical) methods that transcends disciplinary focussed solution finding. To highlight the proposed approach the development of an environmental management system as a response...

  17. Corps of Engineers Scoping Meetings for Nationwide Permit Program Programmatic Environmental Impact Statement

    Science.gov (United States)

    The overall purpose of the PEIS is to review and evaluate the NWP program as a whole, to ensure that the NWP program authorizes only those activities with minimal individual and cumulative adverse environmental effects on the aquatic environment.

  18. Technology Evaluations Related to Mercury, Technetium, and Chloride in Treatment of Wastes at the Idaho Nuclear Technology and Engineering Center of the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    C. M. Barnes; D. D. Taylor; S. C. Ashworth; J. B. Bosley; D. R. Haefner

    1999-10-01

    The Idaho High-Level Waste and Facility Disposition Environmental Impact Statement defines alternative for treating and disposing of wastes stored at the Idaho Nuclear Technology and Engineering Center. Development is required for several technologies under consideration for treatment of these wastes. This report contains evaluations of whether specific treatment is needed and if so, by what methods, to remove mercury, technetium, and chlorides in proposed Environmental Impact Statement treatment processes. The evaluations of mercury include a review of regulatory requirements that would apply to mercury wastes in separations processes, an evaluation of the sensitivity of mercury flowrates and concentrations to changes in separations processing schemes and conditions, test results from laboratory-scale experiments of precipitation of mercury by sulfide precipitation agents from the TRUEX carbonate wash effluent, and evaluations of methods to remove mercury from New Waste Calcining Facility liquid and gaseous streams. The evaluation of technetium relates to the need for technetium removal and alternative methods to remove technetium from streams in separations processes. The need for removal of chlorides from New Waste Calcining Facility scrub solution is also evaluated.

  19. Technology Evaluations Related to Mercury, Technetium, and Chloride in Treatment of Wastes at the Idaho Nuclear Technology and Engineering Center of the Idaho National Engineering and Environmental Laboratory

    International Nuclear Information System (INIS)

    Barnes, C.M.; Taylor, D.D.; Ashworth, S.C.; Bosley, J.B.; Haefner, D.R.

    1999-01-01

    The Idaho High-Level Waste and Facility Disposition Environmental Impact Statement defines alternative for treating and disposing of wastes stored at the Idaho Nuclear Technology and Engineering Center. Development is required for several technologies under consideration for treatment of these wastes. This report contains evaluations of whether specific treatment is needed and if so, by what methods, to remove mercury, technetium, and chlorides in proposed Environmental Impact Statement treatment processes. The evaluations of mercury include a review of regulatory requirements that would apply to mercury wastes in separations processes, an evaluation of the sensitivity of mercury flowrates and concentrations to changes in separations processing schemes and conditions, test results from laboratory-scale experiments of precipitation of mercury by sulfide precipitation agents from the TRUEX carbonate wash effluent, and evaluations of methods to remove mercury from New Waste Calcining Facility liquid and gaseous streams. The evaluation of technetium relates to the need for technetium removal and alternative methods to remove technetium from streams in separations processes. The need for removal of chlorides from New Waste Calcining Facility scrub solution is also evaluated

  20. Between a rock and a hard place: Environmental and engineering considerations when designing coastal defence structures

    NARCIS (Netherlands)

    Firth, L.B.; Thompson, R.C.; Bohn, K.; Abbiati, M.; Airoldi, L.; Bouma, T.J.; Bozzeda, F.; Ceccherelli, V.U.; Colangelo, M.A.; Evans, A.; Ferrario, F.; Hanley, M.E.; Hinz, H.; Hoggart, S.P.G.; Jackson, J.E.; Moore, P.; Morgan, E.H.; Perkol-Finkel, S.; Skov, M.W.; Strain, E.M.; van Belzen, J.; Hawkins, S.J.

    2014-01-01

    Coastal defence structures are proliferating as a result of rising sea levels and stormier seas. With the realisation that most coastal infrastructure cannot be lost or removed, research is required into ways that coastal defence structures can be built to meet engineering requirements, whilst also

  1. The Role of Environmental Engineering Education in Sustainable Development in Iran: AUT Experience

    Science.gov (United States)

    Moghaddam, M. R. Alavi; Taher-shamsi, A.; Maknoun, R.

    2007-01-01

    Purpose: The aim of this paper is to explain the strategies and activities of a main technical University in Iran (Amirkabir University of Technology (AUT)) toward sustainable development goals. Design/methodology/approach: In this paper, three main strategies of AUT to achieve sustainable developments goals in engineering education are explained.…

  2. ENVIRONMENTAL TECHNOLOGY VERIFICATION OF EMISSION CONTROLS FOR HEAVY-DUTY DIESEL ENGINES

    Science.gov (United States)

    While lower emissions limits that took effect in 2004 and reduced sulfur content in diesel fuels will reduce emissions from new heavy-duty engines, the existing diesel fleet, which pollutes at much higher levels, may still have a lifetime of 20 to 30 years. Fleet operators seekin...

  3. 78 FR 37533 - Notice of Intent To Prepare a Programmatic Environmental Impact Statement for Engineered High...

    Science.gov (United States)

    2013-06-21

    ... planting, food, and feed use of transgenic plants into which genetic material has been inserted that... potential for EHECs to compete with food and feed crops; specific plants to consider for EHEC programs... through biotechnology, interspecific hybridization, or other engineering processes (excluding processes...

  4. A comprehensive framework for evaluating the environmental health and safety implications of engineered nanomaterials

    Science.gov (United States)

    Engineered nanomaterials (ENM) are a growing aspect of the global economy, and their safe and sustainable development, use and eventual disposal requires the capability to forecast and avoid potential problems. This review is concerned with the releases of ENM into the environmen...

  5. Postgraduate Programmes on Environmental Water Resources Engineering and Management in Greek Universities

    Science.gov (United States)

    Latinopoulos, Pericles; Angelidis, Panagiotis

    2014-01-01

    The management of complex water problems is nowadays being practised through new ways and approaches. Therefore, water engineers, planners and managers should be appropriately educated through modern undergraduate curricula and by well-designed postgraduate specialisation programmes. Within this framework, a study of the specific characteristics…

  6. Idaho National Engineering Laboratory (INEL) Environmental Restoration Program (ERP), Baseline Safety Analysis File (BSAF). Revision 1

    International Nuclear Information System (INIS)

    1994-01-01

    This document was prepared to take the place of a Safety Evaluation Report since the Baseline Safety Analysis File (BSAF)and associated Baseline Technical Safety Requirements (TSR) File do not meet the requirements of a complete safety analysis documentation. Its purpose is to present in summary form the background of how the BSAF and Baseline TSR originated and a description of the process by which it was produced and approved for use in the Environmental Restoration Program.The BSAF is a facility safety reference document for INEL environmental restoration activities including environmental remediation of inactive waste sites and decontamination and decommissioning (D ampersand D) of surplus facilities. The BSAF contains safety bases common to environmental restoration activities and guidelines for performing and documenting safety analysis. The common safety bases can be incorporated by reference into the safety analysis documentation prepared for individual environmental restoration activities with justification and any necessary revisions. The safety analysis guidelines in BSAF provide an accepted method for hazard analysis; analysis of normal, abnormal, and accident conditions; human factors analysis; and derivation of TSRS. The BSAF safety bases and guidelines are graded for environmental restoration activities

  7. Idaho National Engineering Laboratory (INEL) Environmental Restoration Program (ERP), Baseline Safety Analysis File (BSAF). Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-20

    This document was prepared to take the place of a Safety Evaluation Report since the Baseline Safety Analysis File (BSAF)and associated Baseline Technical Safety Requirements (TSR) File do not meet the requirements of a complete safety analysis documentation. Its purpose is to present in summary form the background of how the BSAF and Baseline TSR originated and a description of the process by which it was produced and approved for use in the Environmental Restoration Program.The BSAF is a facility safety reference document for INEL environmental restoration activities including environmental remediation of inactive waste sites and decontamination and decommissioning (D&D) of surplus facilities. The BSAF contains safety bases common to environmental restoration activities and guidelines for performing and documenting safety analysis. The common safety bases can be incorporated by reference into the safety analysis documentation prepared for individual environmental restoration activities with justification and any necessary revisions. The safety analysis guidelines in BSAF provide an accepted method for hazard analysis; analysis of normal, abnormal, and accident conditions; human factors analysis; and derivation of TSRS. The BSAF safety bases and guidelines are graded for environmental restoration activities.

  8. The environmental context of Acidithiobacillus ferrooxidans and its potential role as an ecosystem engineer in sulphidic mine waste

    Energy Technology Data Exchange (ETDEWEB)

    Ebenaa, Gustav

    2001-06-01

    Microorganisms are the causative agent of the environmental problems since they catalyse the weathering of the (sulphidic) waste. The chemical oxidation alone is not fast enough to create any severe environmental problems. Acidithiobacillus ferrooxidans is thought to be a key organism in weathering of sulphide minerals. A. ferrooxidans is affected by several more or less abiotic factors. The influence of temperature, pH and nutrient deficiency as potentially limiting factors for the activity of A. ferrooxidans has been investigated. It seems that temperature has less influence on its activity, but rather reflects the origin of the bacterial isolate. An alkaline pH seems enough to hinder growth and activity. The nutrients do not seem to be a limiting factor in the studied environment. The possible regulation of the activity of A. ferrooxidans is therefore a way to, at least partly, mitigate the environmental impact from mine waste. Waste from the mining industry is the largest waste problem in Sweden. With amounts over 600 million tonnes one could easily imagine the tremendous cost involved in the abatement. The MiMi-programme, with researchers from several relevant fields, has as its aim to evaluate present and to find alternative techniques to mitigate the environmental impact from mine waste. The understanding of A. ferrooxidans and its role as an ecosystem engineer is essential both in evaluating present techniques and even more so in finding alternative abatement techniques for sulphidic mine waste.

  9. Environmental optimisation of natural gas fired engines - calculation of health externalities

    Energy Technology Data Exchange (ETDEWEB)

    Frohn, L.M.; Becker, T.; Christensen, Jesper; Hertel, O.; Silver, J.D.; Villadsen, H. (Aarhus Univ., National Environmental Research Institute, Dept. of Atmospheric Environment, Roskilde (Denmark)); Soees Hansen, M. (Aarhus Univ., National Environmental Research Institute, Dept. of Policy Analysis, Roskilde (Denmark)); Skou Andersen, M. (European Environment Agency, Copenhagen (Denmark))

    2010-07-01

    The measured emissions of WP1 of the project has been applied as input for model calculations with the EVA model system. The DEHM model which calculates the regional scale delta-concentrations has been further developed to handle the low signal to noise ratio of the delta-concentrations related to the small sources that the gas fired engines constitute. All combinations of engine settings and locations have been run as scenarios with the EVA system, however the results have been grouped into themes to investigate changes related to location as well as changes related to engine settings. New exposure-response relations have been implemented in the system related to the chemical components nitrogen dioxide, formaldehyde, ethene and propene. The choice of high-exposure location in the calculations has unfortunately turned out to be less optimal. The location at Store Valby has previously been applied in studies with the EVA system as a high-exposure site, however in previous applications, the emission sources have been large power plants with stack heights of around 150 meters. The height of the stack of the gas fired engines is only around 30 meters, and the consequence is that the emitted components reach the surface closer to the stack, thereby giving high exposure in an area located further to the southwest, where the population density is not as high as in central Copenhagen. In general the marginal health costs (in Euro pr kg) of carbon monoxide and formaldehyde emissions are very small. The emissions of formaldehyde are also small and the resulting costs for this component is therefore very small. The emission of carbon monoxide is much larger, however the small marginal cost makes the contribution to the total costs small, also for this component. The marginal health costs of nitrogen oxides and ethene emissions show little variation with engine scenario. However the general picture is that as the NO{sub x} emissions increase (either by increasing ignition

  10. Evaluation of environmental management resources (ISO 14001) at civil engineering construction worksites: a case study of the community of Madrid.

    Science.gov (United States)

    Rodríguez, Gracia; Alegre, Francisco Javier; Martínez, Germán

    2011-07-01

    In recent years, significant advances have been made in business organization and management. The growing demands of clients as well as the globalization of world markets are among the many factors that have led to the establishment of systems of quality control and environmental management as a competitive strategy for businesses. When compared to other professional sectors, the construction sector has been slower to respond to environmental problems and to adopt Environmental Management Systems (EMS). In the world today the ISO 14001 standard is currently the main frame of reference used by construction companies to implement this type of management system. This article presents the results of a general study regarding the evaluation of the application of the ISO 14001 standard at civil engineering construction worksites in the Community of Madrid (Spain), specifically pertaining to requirement 4.4.1, Resources, roles, responsibilities, and authority. According to requirement 4.4.1, company executives should appoint people responsible for implementing the EMS and also specify their responsibilities and functions. The personnel designated for supervising environmental work should also have sufficient authority to establish and maintain the EMS. The results obtained were the following: - EMS supervisors did not generally possess adequate training and solid experience in construction work and in the environment. Furthermore, supervisors were usually forced to combine their environmental work with other tasks, which made their job even more difficult. - Generally speaking, supervisors were not given sufficient authority and autonomy because productivity at the construction site had priority over environmental management. This was due to the fact that the company management did not have a respectful attitude toward the environment, nor was the management actively involved in the establishment of the EMS. - Insufficient resources were allocated to the Environmental

  11. Baseline Flowsheet Generation for the Treatment and Disposal of Idaho National Engineering and Environmental Laboratory Sodium Bearing Waste

    International Nuclear Information System (INIS)

    Barnes, C.M.; Lauerhass, L.; Olson, A.L.; Taylor, D.D.; Valentine, J.H.; Lockie, K.A.

    2002-01-01

    The High-Level Waste (HLW) Program at the Idaho National Engineering and Environmental Laboratory (INEEL) must implement technologies and processes to treat and qualify radioactive wastes located at the Idaho Nuclear Technology and Engineering Center (INTEC) for permanent disposal. This paper describes the approach and accomplishments to date for completing development of a baseline vitrification treatment flowsheet for sodium-bearing waste (SBW), including development of a relational database used to manage the associated process assumptions. A process baseline has been developed that includes process requirements, basis and assumptions, process flow diagrams, a process description, and a mass balance. In the absence of actual process or experimental results, mass and energy balance data for certain process steps are based on assumptions. Identification, documentation, validation, and overall management of the flowsheet assumptions are critical to ensuring an integrated, focused program. The INEEL HLW Program initially used a roadmapping methodology, developed through the INEEL Environmental Management Integration Program, to identify, document, and assess the uncertainty and risk associated with the SBW flowsheet process assumptions. However, the mass balance assumptions, process configuration and requirements should be accessible to all program participants. This need resulted in the creation of a relational database that provides formal documentation and tracking of the programmatic uncertainties related to the SBW flowsheet

  12. Waste Characterization Facility at the Idaho National Engineering Laboratory. Environmental Assessment

    International Nuclear Information System (INIS)

    1995-02-01

    DOE has prepared an Environmental Assessment (EA) on the proposed construction and operation of a Waste Characterization Facility (WCF) at INEL. This facility is needed to examine and characterize containers of transuranic (TRU) waste to certify compliance with transport and disposal criteria; to obtain information on waste constituents to support proper packaging, labeling, and storage; and to support development of treatment and disposal plans for waste that cannot be certified. The proposed WCF would be constructed at the Radioactive Waste Management Complex (RWMC). In accordance with the Council on Environmental Quality (CEQ) requirements in 40 CFR Parts 1500-1508, the EA examined the potential environmental impacts of the proposed WCF and discussed potential alternatives. Based on the analyses in the EA, DOE has determined that the proposed action does not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969, and CEQ regulations at 40 CFR 1508.18 and 1508.27. Therefore, an Environmental Impact Statement is not required, and DOE is issuing this Finding of No Significant Impact

  13. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs draft environmental impact statement. Volume 1, Appendix B: Idaho National Engineering Laboratory Spent Nuclear Fuel Management Program

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    The US Department of Energy (DOE) has prepared this report to assist its management in making two decisions. The first decision, which is programmatic, is to determine the management program for DOE spent nuclear fuel. The second decision is on the future direction of environmental restoration, waste management, and spent nuclear fuel management activities at the Idaho National Engineering Laboratory. Volume 1 of the EIS, which supports the programmatic decision, considers the effects of spent nuclear fuel management on the quality of the human and natural environment for planning years 1995 through 2035. DOE has derived the information and analysis results in Volume 1 from several site-specific appendixes. Volume 2 of the EIS, which supports the INEL-specific decision, describes environmental impacts for various environmental restoration, waste management, and spent nuclear fuel management alternatives for planning years 1995 through 2005. This Appendix B to Volume 1 considers the impacts on the INEL environment of the implementation of various DOE-wide spent nuclear fuel management alternatives. The Naval Nuclear Propulsion Program, which is a joint Navy/DOE program, is responsible for spent naval nuclear fuel examination at the INEL. For this appendix, naval fuel that has been examined at the Naval Reactors Facility and turned over to DOE for storage is termed naval-type fuel. This appendix evaluates the management of DOE spent nuclear fuel including naval-type fuel.

  14. Environmental risk assessment and management of engineered nanomaterials - The role of ecotoxicity testing

    DEFF Research Database (Denmark)

    Hjorth, Rune

    the Organisation for Economic Co-operation and Development (OECD) launched a seven year long testing programme around the use of standardized OECD test guidelines (TGs) for ENMs, which concluded that the TGs are generally applicable to ENMs, this thesis argues that it is not possible to offer any conclusions based...... to these is the continued examination of the applicability of ecotoxicity testing to encompass the testing of particles, as the tests originally are developed for dissolved chemicals. Furthermore, the ability of such testing to inform environmental risk assessment and environmental risk management, including...... the applicability of these concepts, has been questioned. The present thesis provides an overview of the challenges facing ecotoxicity testing of ENMs and investigates whether we can rely on such testing to inform risk assessment and eventually management of the potential environmental risk of ENMs. Although...

  15. A Comprehensive Environmental Assessment Approach to Making Informed Decisions about Engineered Nanoparticles

    Science.gov (United States)

    2011-05-01

    BUILDING STRONG® ERDC CEA Case Study: Engineered Aluminum Nanoparticles 5 m. BUILDING STRONG® •Lack of mature industries •Data lacking or evolving...Storage •Use of nano- aluminum still in the R&D phase •Stored under inert atmosphere •Aggregates are stored at the facility (still have research...bioaccumulation 3.Internal • Cell damage in several in vitro studies using internal organ cultures • Neurotoxicity (blood brain barrier disruption) and

  16. Environmental behaviour and ecotoxicity of engineered nanoparticles to algae, plants and fungi

    DEFF Research Database (Denmark)

    Navarro, E.; Baun, Anders; Behra, R.

    2008-01-01

    Developments in nanotechnology are leading to a rapid proliferation of new materials that are likely to become a source of engineered nanoparticles (ENPs) to the environment, where their possible ecotoxicological impacts remain unknown. The surface properties of ENPs are of essential importance...... cell structures and molecules, as well as protective mechanisms. Indirect effects of ENPs depend on their chemical and physical properties and may include physical restraints (clogging effects), solubilization of toxic ENP compounds, or production of reactive oxygen species. Many questions regarding...

  17. Environmental parameters influence non-viral transfection of human mesenchymal stem cells for tissue engineering applications

    Science.gov (United States)

    King, William J.; Kouris, Nicholas A.; Choi, Siyoung; Ogle, Brenda M.; Murphy, William L.

    2012-01-01

    Non-viral transfection is a promising technique which could be used to increase the therapeutic potential of stem cells. The purpose of this study was to explore practical culture parameters of relevance in potential human mesenchymal stem cell (hMSC) clinical and tissue engineering applications, including type of polycationic transfection reagent, N/P ratio and dose of polycation/pDNA polyplexes, cell passage number, cell density, and cell proliferation. The non-viral transfection efficiency was significantly influenced by N/P ratio, polyplex dose, cell density, and cell passage number. hMSC culture conditions that inhibited cell division also decreased transfection efficiency, suggesting that strategies to promote hMSC proliferation may be useful to enhance transfection efficiency in future tissue engineering studies. Non-viral transfection treatments influenced hMSC phenotype, including the expression level of the hMSC marker CD105, and the ability of hMSCs to differentiate down the osteogenic and adipogenic lineages. The parameters found here to promote hMSC transfection efficiency, minimize toxicity, and influence hMSC phenotype may be instructive in future non-viral transfection studies and tissue engineering applications. PMID:22277991

  18. Environmental (Saprozoic Pathogens of Engineered Water Systems: Understanding Their Ecology for Risk Assessment and Management

    Directory of Open Access Journals (Sweden)

    Nicholas J. Ashbolt

    2015-06-01

    Full Text Available Major waterborne (enteric pathogens are relatively well understood and treatment controls are effective when well managed. However, water-based, saprozoic pathogens that grow within engineered water systems (primarily within biofilms/sediments cannot be controlled by water treatment alone prior to entry into water distribution and other engineered water systems. Growth within biofilms or as in the case of Legionella pneumophila, primarily within free-living protozoa feeding on biofilms, results from competitive advantage. Meaning, to understand how to manage water-based pathogen diseases (a sub-set of saprozoses we need to understand the microbial ecology of biofilms; with key factors including biofilm bacterial diversity that influence amoebae hosts and members antagonistic to water-based pathogens, along with impacts from biofilm substratum, water temperature, flow conditions and disinfectant residual—all control variables. Major saprozoic pathogens covering viruses, bacteria, fungi and free-living protozoa are listed, yet today most of the recognized health burden from drinking waters is driven by legionellae, non-tuberculous mycobacteria (NTM and, to a lesser extent, Pseudomonas aeruginosa. In developing best management practices for engineered water systems based on hazard analysis critical control point (HACCP or water safety plan (WSP approaches, multi-factor control strategies, based on quantitative microbial risk assessments need to be developed, to reduce disease from largely opportunistic, water-based pathogens.

  19. A Guide to Cultural and Environmental Interpretation in the U.S. Army Corps of Engineers.

    Science.gov (United States)

    1981-08-01

    Literature Cited Leopold , Aldo . 1970. Sand County Almanac, Ballantine Press, New York. Minahan, Jeanne. 1980. "Omaha District: Powerhouse Tour Games...the most important function of interpretation. Leopold (1970) called this deeper level of understanding an "environmental ethic" that is developed by

  20. Semi-annual report of the environmental engineer program of CDTN - July to December 1988

    International Nuclear Information System (INIS)

    Aun, P.E.

    1989-01-01

    This report is presented in three parts: the first is about the effects caused to the division by the small budget, the second explains the researches developed using nuclear techniques and the third describes the environmental control activities. (E.G.) [pt

  1. Designation of Environmental Impacts and Damages of Turbojet Engine: A Case Study with GE-J85

    Directory of Open Access Journals (Sweden)

    Onder Altuntas

    2014-05-01

    Full Text Available Between the troposphere and stratosphere layers of the atmosphere is a critical zone for collecting emissions and negative effects on the Earth (ecological, humanity, and resources. Aircrafts are the main causes of the impacts in this layer. In this study, environmental effects (Damages, Specific Fuel Consumption Impact-SFCI and Thrust Environmental Impact-TEI of different fueled (Jet-A and Liquid Hydrogen-H2 jet engines (a case study with GE-J85 are investigated. This comparison was made between 7000–10,000 m altitude and 0.7–1.0 Mach. The maximum damages were found to be 82.44 PDF∙m2∙yr (Potentially Disappeared Fraction from one m2 area during one year, 1.75 × 10−3 DALY (disability-adjusted life years, and 8100 MJ Surplus for Ecosystem Quality, Human Health and Resources, respectively, at Jet-A fueled aircraft, 1 Mach, and 7000 m altitude. Additionally, the maximum SFCI was calculated as 344.03 mPts/kg at H2-fueled, 0.7 Mach, and 10,000 m; the minimum TEI was calculated as 13.78 mPts/N at H2-fueled aircraft, 0.7 Mach, and 9000 m. The best environmental (low specific fuel consumption and thrust impacts flight situations were found in this study at a high altitude and a low Mach number.

  2. 1983 Environmental monitoring program report for Idaho National Engineering Laboratory Site

    International Nuclear Information System (INIS)

    Hoff, D.L.; Chew, E.W.; Dickson, R.L.

    1984-05-01

    The results of the various monitoring programs for 1983 indicated that radioactivity from the Idaho National Engineering Laboratory (INEL) Site operations could not be distinguished from worldwide fallout and natural radioactivity in the region surrounding the Site. Although some radioactive materials were discharged during Site operations, concentrations and doses to the surrounding population were of no health consequence and were far less than State of Idaho and Federal health protection guidelines. This report describes the air, water, and foodstuff samples routinely collected at the INEL boundary locations and at locations distant from the INEL Site. 11 figures, 14 tables

  3. Idaho National Engineering Laboratory Site environmental report for Calendar Year 1994

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, R.G.; Peterson, D. [Environmental Science and Research Foundation, Idaho Falls, ID (United States); Hoff, D.L. [USDOE Idaho Operations Office, Idaho Falls, ID (United States)

    1995-07-01

    This report presents a compilation of data collected in 1994 for routine environmental surveillance programs conducted on and around INEL. EG&G conducted the onsite surveillance program January-- September; Lockheed Idaho conducted the program October--December. The offsite surveillance program was conducted by the Environmental Science and Research Foundation. Ground water monitoring (both on and off site) was performed by USGS. This report presents summaries of facility effluent monitoring data collected by INEL contractors. It includes collection of foodstuffs at the INEL boundary and distant offsite locations, and the collection of air and water samples at onsite locations and offsite boundary and distant locations. The report also compares and evaluates the sample results to federal regulations and standards.

  4. Idaho National Engineering Laboratory Site environmental report for Calendar Year 1994

    International Nuclear Information System (INIS)

    Mitchell, R.G.; Peterson, D.; Hoff, D.L.

    1995-07-01

    This report presents a compilation of data collected in 1994 for routine environmental surveillance programs conducted on and around INEL. EG ampersand G conducted the onsite surveillance program January-- September; Lockheed Idaho conducted the program October--December. The offsite surveillance program was conducted by the Environmental Science and Research Foundation. Ground water monitoring (both on and off site) was performed by USGS. This report presents summaries of facility effluent monitoring data collected by INEL contractors. It includes collection of foodstuffs at the INEL boundary and distant offsite locations, and the collection of air and water samples at onsite locations and offsite boundary and distant locations. The report also compares and evaluates the sample results to federal regulations and standards

  5. Predicted costs of environmental controls for a commercial oil shale industry. Volume 1. An engineering analysis

    Energy Technology Data Exchange (ETDEWEB)

    Nevens, T.D.; Culbertson, W.J. Jr.; Wallace, J.R.; Taylor, G.C.; Jovanovich, A.P.; Prien, C.H.; Hicks, R.E.; Probstein, R.F.; Domahidy, G.

    1979-07-01

    The pollution control costs for a commercial oil shale industry were determined in a joint effort by Denver Research Institute, Water Purification Associates of Cambridge, and Stone and Webster Engineering of Boston and Denver. Four commercial oil shale processes were considered. The results in terms of cost per barrel of syncrude oil are predicted to be as follows: Paraho Process, $0.67 to $1.01; TOSCO II Process, $1.43 to $1.91; MIS Process, $2.02 to $3.03; and MIS/Lurgi-Ruhrgas Process, $1.68 to $2.43. Alternative pollution control equipment and integrated pollution control strategies were considered and optimal systems selected for each full-scale plant. A detailed inventory of equipment (along with the rationale for selection), a detailed description of control strategies, itemized costs and predicted emission levels are presented for each process. Capital and operating cost data are converted to a cost per barrel basis using detailed economic evaluation procedures. Ranges of cost are determined using a subjective self-assessment of uncertainty approach. An accepted methodology for probability encoding was used, and cost ranges are presented as subjective probability distributions. Volume I presents the detailed engineering results. Volume II presents the detailed analysis of uncertainty in the predicted costs.

  6. Performance and Environmental Test Results of the High Voltage Hall Accelerator Engineering Development Unit

    Science.gov (United States)

    Kamhawi, Hani; Haag, Thomas; Huang, Wensheng; Shastry, Rohit; Pinero, Luis; Peterson, Todd; Mathers, Alex

    2012-01-01

    NASA Science Mission Directorate's In-Space Propulsion Technology Program is sponsoring the development of a 3.5 kW-class engineering development unit Hall thruster for implementation in NASA science and exploration missions. NASA Glenn and Aerojet are developing a high fidelity high voltage Hall accelerator that can achieve specific impulse magnitudes greater than 2,700 seconds and xenon throughput capability in excess of 300 kilograms. Performance, plume mappings, thermal characterization, and vibration tests of the high voltage Hall accelerator engineering development unit have been performed. Performance test results indicated that at 3.9 kW the thruster achieved a total thrust efficiency and specific impulse of 58%, and 2,700 sec, respectively. Thermal characterization tests indicated that the thruster component temperatures were within the prescribed material maximum operating temperature limits during full power thruster operation. Finally, thruster vibration tests indicated that the thruster survived the 3-axes qualification full-level random vibration test series. Pre and post-vibration test performance mappings indicated almost identical thruster performance. Finally, an update on the development progress of a power processing unit and a xenon feed system is provided.

  7. Engineering Perspectives and Environmental Life Cycle Optimization to Enhance Aggregate Mining in Vietnam

    Directory of Open Access Journals (Sweden)

    Petra Schneider

    2018-02-01

    Full Text Available Cleaner Production (CP addresses precautionary, site-specific environmental measures to reduce emissions and assess resource efficiency potentials at the point of origin by analyzing operational material and energy flows. The approach is generally based on the criteria quality as well as environmental/occupational health and safety, and promotes their integration. The paper presents options for applying CP to aggregate mining, based on a Life Cycle Assessment (LCA and illustrated by results from a study of small-scale industrial aggregate mining in Hoa Binh Province (Vietnam. The regulatory framework to limit the impact of mining on the environment is largely comparable to international standards and is suitably enforced. Despite gaining experience through the practical handling of enforcement procedures over the long term, there is still a considerable potential to optimize CP strategies in Vietnam’s aggregate mining industry. This is shown by the results of a survey of aggregates mining companies in Hoa Binh Province as well as on-site data collection to determine the technological characteristics of production facilities alongside economic and environmental factors. The assessment of the survey is supported by LCA results for: (a the existing situation; and (b the scenario of a merging of companies, undertaken to improve the resource efficiency of the aggregate mining in Hoa Binh. Findings can help implement an integrated approach to foster the sustainable mining of building aggregates.

  8. Delivering better power: the role of simulation in reducing the environmental impact of aircraft engines.

    Science.gov (United States)

    Menzies, Kevin

    2014-08-13

    The growth in simulation capability over the past 20 years has led to remarkable changes in the design process for gas turbines. The availability of relatively cheap computational power coupled to improvements in numerical methods and physical modelling in simulation codes have enabled the development of aircraft propulsion systems that are more powerful and yet more efficient than ever before. However, the design challenges are correspondingly greater, especially to reduce environmental impact. The simulation requirements to achieve a reduced environmental impact are described along with the implications of continued growth in available computational power. It is concluded that achieving the environmental goals will demand large-scale multi-disciplinary simulations requiring significantly increased computational power, to enable optimization of the airframe and propulsion system over the entire operational envelope. However even with massive parallelization, the limits imposed by communications latency will constrain the time required to achieve a solution, and therefore the position of such large-scale calculations in the industrial design process. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  9. Current state of nuclear fuel cycles in nuclear engineering and trends in their development according to the environmental safety requirements

    Science.gov (United States)

    Vislov, I. S.; Pischulin, V. P.; Kladiev, S. N.; Slobodyan, S. M.

    2016-08-01

    The state and trends in the development of nuclear fuel cycles in nuclear engineering, taking into account the ecological aspects of using nuclear power plants, are considered. An analysis of advantages and disadvantages of nuclear engineering, compared with thermal engineering based on organic fuel types, was carried out. Spent nuclear fuel (SNF) reprocessing is an important task in the nuclear industry, since fuel unloaded from modern reactors of any type contains a large amount of radioactive elements that are harmful to the environment. On the other hand, the newly generated isotopes of uranium and plutonium should be reused to fabricate new nuclear fuel. The spent nuclear fuel also includes other types of fission products. Conditions for SNF handling are determined by ecological and economic factors. When choosing a certain handling method, one should assess these factors at all stages of its implementation. There are two main methods of SNF handling: open nuclear fuel cycle, with spent nuclear fuel assemblies (NFAs) that are held in storage facilities with their consequent disposal, and closed nuclear fuel cycle, with separation of uranium and plutonium, their purification from fission products, and use for producing new fuel batches. The development of effective closed fuel cycles using mixed uranium-plutonium fuel can provide a successful development of the nuclear industry only under the conditions of implementation of novel effective technological treatment processes that meet strict requirements of environmental safety and reliability of process equipment being applied. The diversity of technological processes is determined by different types of NFA devices and construction materials being used, as well as by the composition that depends on nuclear fuel components and operational conditions for assemblies in the nuclear power reactor. This work provides an overview of technological processes of SNF treatment and methods of handling of nuclear fuel

  10. Cultural Resource Assessment of the Test Area North Demolition Landfill at the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Brenda R. Pace

    2003-07-01

    The proposed new demolition landfill at Test Area North on the Idaho National Engineering and Environmental Laboratory (INEEL) will support ongoing demolition and decontamination within the facilities on the north end of the INEEL. In June of 2003, the INEEL Cultural Resource Management Office conducted archival searches, field surveys, and coordination with the Shoshone-Bannock Tribes to identify all cultural resources that might be adversely affected by the project and to provide recommendations to protect those listed or eligible for listing on the National Register of Historic Places. These investigations showed that landfill construction and operation would affect two significant cultural resources. This report outlines protective measures to ensure that these effects are not adverse.

  11. Environmental Assessment for the Consolidation of 88th Air Base Wing Civil Engineer Operations, Wright-Patterson AFB, Ohio

    Science.gov (United States)

    2012-09-01

    CFR989. ~M-- VIDA . PERKINS, P.E.. Director Civil Engineer Directorate Page 3 of 3 FINAL ENVIRONMENTAL ASSESSMENT FOR THE CONSOLIDATION OF 88TH...threatened or  endangered species or the destruction of a cultural site).  Labor , energy, materials, and capital would be committed for construction of...Short‐term use of a  labor  force would result in long‐term productivity of the site for convenient and  consolidated services. The consolidation of the

  12. Engineering of air-stable Fe/C/Pd composite nanoparticles for environmental remediation applications

    Energy Technology Data Exchange (ETDEWEB)

    Haham, Hai; Grinblat, Judith [Institute of Nanotechnology and Advanced Materials, Department of Chemistry, Bar-Ilan University, Ramat-Gan 52900 (Israel); Sougrati, Moulay-Tahar; Stievano, Lorenzo [Institute Charles Gerhardt (UMR 5253 CNRS), Université Montpellier 2, CC 1502, Place E. Bataillon, 34095 Montpellier, Cedex 5 (France); Margel, Shlomo, E-mail: shlomo.margel@mail.biu.ac.il [Institute of Nanotechnology and Advanced Materials, Department of Chemistry, Bar-Ilan University, Ramat-Gan 52900 (Israel)

    2015-09-01

    The present manuscript presents a convenient method for the synthesis of iron/carbon (Fe/C) nanoparticles (NPs) coated with much smaller Pd NPs for the removal of halogenated organic pollutants. For this purpose, iron oxide/polyvinylpyrrolidone (IO/PVP) NPs were first prepared by the thermal decomposition of ferrocene mixed with PVP at 350 °C under an inert atmosphere. IO,Fe/C and Fe/C NPs coated with graphitic and amorphous carbon layers were then produced by annealing the IO/PVP NPs at 500 and 600 °C, respectively, under an inert atmosphere. The effect of the annealing temperature on the chemical composition, shape, crystallinity, surface area and magnetic properties of the IO/PVP, IO,Fe/C and Fe/C NPs has been elucidated. Air-stable Fe/C/Pd NPs were produced by mixing the precursor palladium acetate with the air-stable Fe/C NPs in ethanol. The obtained Fe/C/Pd NPs demonstrated significantly higher environmental activity than the Fe/C NPs on eosin Y, a model halogenated organic pollutant. The environmental activity of the Fe/C/Pd NPs also increased with their increasing Pd content. - Highlights: • Fe/C NPs were produced by thermal annealing of iron oxide/PVP NPs under Ar atmosphere. • Fe/C NPs were coated with a thin layer of smaller Pd NPs by reduction of a Pd precursor. • The environmental activity of the Fe/C/Pd NPs was demonstrated.

  13. Environmental impact of engineered carbon nanoparticles: from releases to effects on the aquatic biota.

    Science.gov (United States)

    Mottier, Antoine; Mouchet, Florence; Pinelli, Éric; Gauthier, Laury; Flahaut, Emmanuel

    2017-08-01

    Nano-ecotoxicology is an emerging science which aims to assess the environmental effect of nanotechnologies. The development of this particular aspect of ecotoxicology was made necessary in order to evaluate the potential impact of recently produced and used materials: nanoparticles (NPs). Among all the types of NPs, carbon nanoparticles (CNPs) especially draw attention giving the increasing number of applications and integration into consumer products. However the potential impacts of CNPs in the environment remain poorly known. This review aims to point out the critical issues and aspects that will govern the toxicity of CNPs in the environment. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Environmental implications and applications of engineered nanoscale magnetite and its hybrid nanocomposites: A review of recent literature

    Energy Technology Data Exchange (ETDEWEB)

    Su, Chunming, E-mail: su.chunming@epa.gov

    2017-01-15

    Highlights: • Environmental impact of engineered MNPs. • MNPs and their hybrids explored for use in energy, analytical chemistry, and catalysis. • Surface modification to MNPs allow biocompatible applications. • Adsorptive and separative removal of a wide range of contaminants from aquatic environments. • Active remediation and natural attenuation of contaminants in soil and groundwater using MNPs. - Abstract: This review focuses on environmental implications and applications of engineered magnetite (Fe{sub 3}O{sub 4}) nanoparticles (MNPs) as a single phase or a component of a hybrid nanocomposite that exhibits superparamagnetism and high surface area. MNPs are synthesized via co-precipitation, thermal decomposition and combustion, hydrothermal process, emulsion, microbial process, and green approaches. Aggregation/sedimentation and transport of MNPs depend on surface charge of MNPs and geochemical parameters such as pH, ionic strength, and organic matter. MNPs generally have low toxicity to humans and ecosystem. MNPs are used for constructing chemical/biosensors and for catalyzing a variety of chemical reactions. MNPs are used for air cleanup and carbon sequestration. MNP nanocomposites are designed as antimicrobial agents for water disinfection and flocculants for water treatment. Conjugated MNPs are widely used for adsorptive/separative removal of organics, dyes, oil, arsenic, phosphate, molybdate, fluoride, selenium, Cr(VI), heavy metal cations, radionuclides, and rare earth elements. MNPs can degrade organic/inorganic contaminants via chemical reduction or catalyze chemical oxidation in water, sediment, and soil. Future studies should further explore mechanisms of MNP interactions with other nanomaterials and contaminants, economic and green approaches of MNP synthesis, and field scale demonstration of MNP utilization.

  15. Effects of engineered nano-titanium dioxide on pore surface properties and phosphorus adsorption of sediment: its environmental implications.

    Science.gov (United States)

    Luo, Zhuanxi; Wang, Zhenhong; Wei, Qunshan; Yan, Changzhou; Liu, Feng

    2011-09-15

    Understanding the environmental safety and human health implications of engineered nanoparticles (ENPs) is of worldwide importance. As an important ENPs, engineered nano-TiO(2) (Enano-TiO(2)) may have been substantially deposited in aquatic sediments because of its widely uses. Sediment pore surface properties would be thus significantly influenced due to the large surface area of Enano-TiO(2). In this study, Enano-TiO(2) was found to greatly impact on sediment pore surface properties. The attachment of Enano-TiO(2) particles to sediment surfaces enhanced markedly BET specific surface area and t-Plot external specific surface area, and thereby increased sediment phosphorus (P) adsorption maximum (S(max)). Contrarily, the fill of Enano-TiO(2) particles into the micropores of sediments could significantly reduce t-Plot micropore specific surface area, and cause slight decrease in sediment P binding energy (K). Clearly, P sorbed in sediment would be easily released because of the decreasing P binding energy of the sediment with elevated Enano-TiO(2). Enano-TiO(2) would thus cause aggravated endogenous pollution in water if such sediment was re-suspended on disturbance. The results obtained in this study contribute to our increasing knowledge of how to regulate physicochemical behavior of pollutants in sediments under the influences of Enano-TiO(2) and/or similar ENPs. Copyright © 2011 Elsevier B.V. All rights reserved.

  16. Environmental effects of using Methanol as a biofuel into the combustion chamber of a heavy-duty diesel engine

    Directory of Open Access Journals (Sweden)

    kianoosh shojae

    2016-12-01

    Full Text Available Methanol as a biofuel is an environmentally friendly substitute for pure diesel and can be obtained from biomasses. The use of biofuels such as methanol for the combustion process is associated with positive impacts on the environment. Using pure methanol or a blend of diesel/methanol fuel in motorized vehicles has been proposed by researchers. In this paper, pure methanol was injected into the combustion chamber of a ISM 370 HD diesel engine and the exhaust emissions were evaluated by using AVL FIRE CFD code software at four engine speeds (1200, 1400, 1600 and 1800 rpm. Additionally, the influences of EGR mass fraction and various injection timings were investigated. In order to validate the simulation results, in-cylinder mean pressure and rate of heat release (RHR were compared with experimental data, and the results gave an acceptable agreement. The obtained results from the conducted simulation showed that the use of methanol fuel in the combustion chamber dramatically reduced the amount of exhaust emissions such as NO, soot, CO, and CO2 to 90%, 75%, 40%, and 26%, respectively. In addition, a mass fraction of EGR (20% caused a reduction in the amount of exhaust NO to about 12%. It was determined that when a system is equipped with a fueling system at 3 deg before top dead center (BTDC, the exhaust NO and soot are reduced by 5.8% and 3%.

  17. Engineering DNA Molecule Bridge between Metal Electrodes for High-Performance Molecular Transistor: An Environmental Dependent Approach.

    Science.gov (United States)

    Fathizadeh, S; Behnia, S; Ziaei, J

    2018-03-08

    Molecule-based transistors have attracted much attention due to their exclusive properties. Creation of a molecular transistor as well as engineering its structure have become one of the greatest aims of scientists. We have focused on the environmental dependent behavior of a DNA-templated transistor. Using the statistical distribution of the energy levels, we were able to distinguish the delocalized states of charge carriers and the transition between the localized and delocalized behaviors. On the other hand, we can determine the stability conditions of our quantum dynamical system. The results are verified by the inverse participation ratio method. Therefore, the most appropriate parameters for designing the DNA transistor are chosen. The DNA sequence is an important factor for its transport properties, but the results have shown that in the presence of the bath, the bath parameters are important, too. As is shown, it is possible that via the adjustment of bath parameters, one can design a conductivity channel for all nucleotide contents. Thus, one can engineer a DNA based transistor simply through the setting of only one parameter.

  18. Engineering the Surface/Interface Structures of Titanium Dioxide Micro and Nano Architectures towards Environmental and Electrochemical Applications

    Directory of Open Access Journals (Sweden)

    Xiaoliang Wang

    2017-11-01

    Full Text Available Titanium dioxide (TiO2 materials have been intensively studied in the past years because of many varied applications. This mini review article focuses on TiO2 micro and nano architectures with the prevalent crystal structures (anatase, rutile, brookite, and TiO2(B, and summarizes the major advances in the surface and interface engineering and applications in environmental and electrochemical applications. We analyze the advantages of surface/interface engineered TiO2 micro and nano structures, and present the principles and growth mechanisms of TiO2 nanostructures via different strategies, with an emphasis on rational control of the surface and interface structures. We further discuss the applications of TiO2 micro and nano architectures in photocatalysis, lithium/sodium ion batteries, and Li–S batteries. Throughout the discussion, the relationship between the device performance and the surface/interface structures of TiO2 micro and nano structures will be highlighted. Then, we discuss the phase transitions of TiO2 nanostructures and possible strategies of improving the phase stability. The review concludes with a perspective on the current challenges and future research directions.

  19. A methodological study of environmental simulation in architecture and engineering. Integrating daylight and thermal performance across the urban and building scales

    DEFF Research Database (Denmark)

    Sattrup, Peter Andreas; Strømann-Andersen, Jakob Bjørn

    2011-01-01

    theories of environmental performance in architecture and engineering, and a range of simulation experiments by the authors. The framework is an open structure, which can continuously be renewed and contributed to by any author. The value of the framework is demonstrated, using it to map a series...... of simulation studies, emphazising the multidimensionality of environmental performance optimization. Clarifying the conceptual interconnectivity between architecture and engineering, - agency and physics, - not only enhances communicative power and the dissemination of knowledge, but becomes instrumental...... in pointing out the need for improving metrics, software and not least the performance of the built environment itself....

  20. The Third International Meeting on Environmental Biotechnology and Engineering. 21-25 September 2008. Palma de Mallorca. Spain

    International Nuclear Information System (INIS)

    Sastre Conde, I.; Macarie, H.; Lopez Lopez, G.; Ibanez Burgos, A. M.; Garau, C.; Luna, J. M.; March, J.; Martorell, A.; Colombas, M.; Vadell, J.; Martorell, A.; Sanz, J. L.

    2009-01-01

    The congress intends to translate fundamental knowledge on the microbial ecology of impaired ecosystems into technological solutions for the restoration of terrestrial and aquatic environments. The unification of fundamental and applied research is of utmost importance because they are interdependent and connected to the action-reaction of the environment. Then the main objective of the congress will be to integrate the different technology oriented research engineering, biotechnology) in such a way that their future action will be based on fundamental research (ecology). The action on the environment must be interactive with the participation of different disciplines having common objectives: -One of the common objectives must be to preserve energy resources and create renewable ones. -Other common objectives must be the re-use of waste which should be valorized and not seen any more as waste but better as new resources- -Finally, the last but not the least common objective must be to minimize pollution and discharge to the environment in order to protect its ecology. All this will be achieved only with the development of cleaner and cheaper technologies both on an environmental and an energy point of view as well as with an adequate environmental education and a sustainable development. (Author)

  1. Workshop proceedings: Developing the scientific basis for long-term land management of the Idaho National Engineering and Environmental Laboratory

    International Nuclear Information System (INIS)

    Sperber, T.D.; Reynolds, T.D.

    1998-03-01

    Responses to a survey on the INEEL Comprehensive Facility and Land Use Plan (US DOE 1996a) indicated the need for additional discussion on environmental resources, disturbance, and land use issues on the Idaho National Engineering and Environmental Laboratory (INEEL). As a result, in September 1997, a workshop evaluated the existing scientific basis and determined future data needs for long-term land management on the INEEL. This INEEL Long-Term Land Management Workshop examined existing data on biotic, abiotic, and heritage resources and how these resources have been impacted by disturbance activities of the INEEL. Information gained from this workshop will help guide land and facility use decisions, identify data gaps, and focus future research efforts. This report summarizes background information on the INEEL and its long-term land use planning efforts, presentations and discussions at the workshop, and the existing data available at the INEEL. In this document, recommendations for future INEEL land use planning, research efforts, and future workshops are presented. The authors emphasize these are not policy statements, but comments and suggestions made by scientists and others participating in the workshop. Several appendices covering land use disturbance, legal drivers, land use assumptions and workshop participant comments, workshop participants and contributors, and the workshop agenda are also included

  2. Workshop proceedings: Developing the scientific basis for long-term land management of the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Sperber, T.D.; Reynolds, T.D. [eds.] [Environmental Science and Research Foundation, Inc., Idaho Falls, ID (United States); Breckenridge, R.P. [ed.] [Lockheed Martin Idaho Technologies Co., Idaho Falls, ID (United States)

    1998-03-01

    Responses to a survey on the INEEL Comprehensive Facility and Land Use Plan (US DOE 1996a) indicated the need for additional discussion on environmental resources, disturbance, and land use issues on the Idaho National Engineering and Environmental Laboratory (INEEL). As a result, in September 1997, a workshop evaluated the existing scientific basis and determined future data needs for long-term land management on the INEEL. This INEEL Long-Term Land Management Workshop examined existing data on biotic, abiotic, and heritage resources and how these resources have been impacted by disturbance activities of the INEEL. Information gained from this workshop will help guide land and facility use decisions, identify data gaps, and focus future research efforts. This report summarizes background information on the INEEL and its long-term land use planning efforts, presentations and discussions at the workshop, and the existing data available at the INEEL. In this document, recommendations for future INEEL land use planning, research efforts, and future workshops are presented. The authors emphasize these are not policy statements, but comments and suggestions made by scientists and others participating in the workshop. Several appendices covering land use disturbance, legal drivers, land use assumptions and workshop participant comments, workshop participants and contributors, and the workshop agenda are also included.

  3. Engineering light: advances in wavelength conversion materials for energy and environmental technologies.

    Science.gov (United States)

    Cates, Ezra L; Chinnapongse, Stephanie L; Kim, Jae-Hyuk; Kim, Jae-Hong

    2012-11-20

    Upconversion photoluminescence (UC) occurs in optical materials that are capable of absorbing low energy photons and emitting photons of higher energy and shorter wavelength, while downconversion (DC) materials may absorb one high energy photon and emit two of lower energy for quantum yields exceeding unity. These wavelength conversion processes allow us to transform electromagnetic radiation so it may be more effectively utilized by light-capturing devices and materials. Progress in designing more efficient organic and inorganic photochemical conversion systems has initiated a recent surge in attempts to apply these processes for practical uses, including enhancement of many energy and environmental technologies. In this review, we introduce important concepts in UC and DC materials and discuss the current status and challenges toward the application of wavelength conversion to solar cells, photocatalysis, and antimicrobial surfaces.

  4. 1984 Environmental monitoring program report for Idaho National Engineering Laboratory Site

    International Nuclear Information System (INIS)

    Hoff, D.L.; Chew, E.W.; Dickson, R.L.

    1985-05-01

    The results of the various monitoring programs for 1984 indicated that radioactivity from INEL Site operations could not be distinguished from worldwide fallout and natural radioactivity in the region surrounding the Site. Although some radioactive materials were discharged during Site operations, concentrations and doses to the surrounding population were of no health consequence and were far less than State of Idaho and federal health protection guidelines. This report describes the air, water, and foodstuff samples routinely collected at the INEL boundary locations and at locations distant from the INEL Site; and it compares and evaluates the sample results, discussing implications, if any. The report also summarizes significant environmental activities at the INEL Site during 1984, nonradioactive and radioactive effluent monitoring at the Site, and the US Geological Survey (USGS) groundwater monitoring program. 28 refs., 13 figs., 22 tabs

  5. Environmental engineering and pollution prevention. European network of excellence and partnership

    International Nuclear Information System (INIS)

    Wotte, J.; Halang, W.A.; Kraemer, B.J.

    1996-01-01

    The primary purpose of the workshop was to present and discuss the main goals, contents, projects, partners, and implications of a proposed non-profit European Research Network, which aims at establishing research nodes at key locations in European NATO and CP countries. All projects are directed to solutions for the heavily polluted 'Black Triangle' Bohemia, Saxony, and Silesia, which was selected as a nucleus for the network because of its geographical location and cross-border environmental problems. Papers are presented under the following subject headings: disarmament; environment; human resources; high technology; and health. They include papers on soil remediation at manufactured gas plants, and power generation in the Czech Republic and its contribution to air pollution prevention in Central Europe

  6. SOLAR POWER PLANTS IN THE EU. AN ENVIRONMENTALLY-FRIENDLY ENGINE FOR THE EUROPEAN ECONOMIES

    Directory of Open Access Journals (Sweden)

    Mircea SAVEANU

    2014-10-01

    Full Text Available We establish that the European Union is facing severe ecological problems, by analysing the ecological footprint of selected member states. Many of these problems are related to carbon and carbon equivalent emissions, some of which are generated by fossil fuel power plants. It is then shown that the European Union has potential in the solar power renewable energy sector. Finally, we calculate roughly how much land would be necessary in order to replace fossil fuel power plants, as well as nuclear plants, which are largely seen as environmentally dangerous. It is concluded that developing this alternative energy sector would help improve the ecological sustainability of the Union, by diminishing a significant part of its carbon footprint.

  7. Environmental assessment: Closure of the Waste Calcining Facility (CPP-633), Idaho National Engineering Laboratory

    International Nuclear Information System (INIS)

    1996-07-01

    The U.S. Department of Energy (DOE) proposes to close the Waste Calcining Facility (WCF). The WCF is a surplus DOE facility located at the Idaho Chemical Processing Plant (ICPP) on the Idaho National Engineering Laboratory (INEL). Six facility components in the WCF have been identified as Resource Conservation and Recovery Ace (RCRA)-units in the INEL RCRA Part A application. The WCF is an interim status facility. Consequently, the proposed WCF closure must comply with Idaho Rules and Standards for Hazardous Waste contained in the Idaho Administrative Procedures Act (IDAPA) Section 16.01.05. These state regulations, in addition to prescribing other requirements, incorporate by reference the federal regulations, found at 40 CFR Part 265, that prescribe the requirements for facilities granted interim status pursuant to the RCRA. The purpose of the proposed action is to reduce the risk of radioactive exposure and release of hazardous constituents and eliminate the need for extensive long-term surveillance and maintenance. DOE has determined that the closure is needed to reduce potential risks to human health and the environment, and to comply with the Idaho Hazardous Waste Management Act (HWMA) requirements

  8. Environmental behavior and ecotoxicity of engineered nanoparticles to algae, plants, and fungi.

    Science.gov (United States)

    Navarro, Enrique; Baun, Anders; Behra, Renata; Hartmann, Nanna B; Filser, Juliane; Miao, Ai-Jun; Quigg, Antonietta; Santschi, Peter H; Sigg, Laura

    2008-07-01

    Developments in nanotechnology are leading to a rapid proliferation of new materials that are likely to become a source of engineered nanoparticles (ENPs) to the environment, where their possible ecotoxicological impacts remain unknown. The surface properties of ENPs are of essential importance for their aggregation behavior, and thus for their mobility in aquatic and terrestrial systems and for their interactions with algae, plants and, fungi. Interactions of ENPs with natural organic matter have to be considered as well, as those will alter the ENPs aggregation behavior in surface waters or in soils. Cells of plants, algae, and fungi possess cell walls that constitute a primary site for interaction and a barrier for the entrance of ENPs. Mechanisms allowing ENPs to pass through cell walls and membranes are as yet poorly understood. Inside cells, ENPs might directly provoke alterations of membranes and other cell structures and molecules, as well as protective mechanisms. Indirect effects of ENPs depend on their chemical and physical properties and may include physical restraints (clogging effects), solubilization of toxic ENP compounds, or production of reactive oxygen species. Many questions regarding the bioavailability of ENPs, their uptake by algae, plants, and fungi and the toxicity mechanisms remain to be elucidated.

  9. Strategy for assessing the technical, environmental, and engineering feasibility of subseabed disposal

    International Nuclear Information System (INIS)

    Anderson, D.R.; Boyer, D.G.; Herrmann, H.; Kelly, J.; Talbert, D.M.

    1980-01-01

    This paper presents the strategy and management techniques used in the development of the US Subseabed Disposal Program (SDP) for possible disposal of both high-level waste and spent fuel. These have been developed through joint efforts of the Department of Energy (DOE), Division of Waste Isolation, the Sandia Technical Program Manager, the Technical Program Coordinators, the Advisory Group, and the Principal Investigators. Three subsections of this paper address the various components which make up the SDP strategy and management techniques. The first section will summarize the US DOE high-level waste and spent fuel disposal program and the position that the SDP occupies within that program. The second section, the Subseabed Program Plan, addresses the technical and administrative tools which are employed to facilitate the day-to-day operation of the SDP. The third section addresses the current studies and future plans for addressing the legal, political, and international uncertainties that must be resolved prior to the time the SDP reaches the final engineering phases

  10. Future land use and concerns about the Idaho National Engineering and Environmental Laboratory: A survey of urban dwellers

    International Nuclear Information System (INIS)

    Burger, J.; Roush, D.; Wartenberg, D.; Gochfeld, M.

    1999-01-01

    The authors examined environmental concerns and future land-use preferences of 487 people attending the Boise River Festival in Boise, Idaho, USA, about the Idaho National Engineering and Environmental Laboratory (NEEL), owned by the US Department of Energy (DOE). They were particularly interested in the perceptions of urban dwellers living at some distance from the facility, since attitudes and perceptions are usually examined for people living near such facilities. More than 50% of the people were most worried about contamination and about waste storage and transport, another 23% were concerned about human health and accidents and spills, and the rest listed other concerns such as jobs and the economy of education. When given a list of possible concerns, accidents and spills, storage of current nuclear materials, and storage of additional nuclear materials were rated the highest. Thus both open-ended and structured questions identified nuclear storage and accidents and spills as the most important concerns, even for people living far from a DOE site. The highest rated future land used were National Environmental Research Park, recreation, and returning the land to the Shoshone-Bannock tribes; the lowest rated future land uses were homes and increased nuclear waste storage. These relative rankings are similar to those obtained for other Idahoans living closer to the site and for the people living near the Savannah River Site. The concern expressed about accidents and spills and waste storage translated into a desire not to see additional waste brought to INEEL and a low rating for using INEEL for building homes

  11. Preliminary draft: environmental impact statement for Hot Engineering Test Project at Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Boyle, J.W.; Baxter, B.J.; Carpenter, J.A.

    1978-08-01

    The project considered is the Hot Engineering Test Project (HETP), which is to be located in largely existing facilities at Oak Ridge National Laboratory (ORNL). The project is a part of the National High Temperature Gas-Cooled Reactor Fuel Recycle Program, which seeks to demonstrate the technological feasibility of the recycle processes. The HETP will attempt to confirm the operability of the processes (proven feasible in cold or nonradioactive, benchtop experimentation) under the more realistic radioactive condition. As such, the operation will involve the reprocessing and refabrication of spent HTGR fuel rods obtained from the Fort St. Vrain reactor. The reference fuel is highly enriched uranium. No significant radiological impacts are expected from routine operation of the facility to any biota or ecosystem. Concentrations of one or more radionuclides in Whiteoak Lake will increase as a result of the combination of HETP wastes with other ORNL wastes. Nonradiological effects from construction activities and routine operation should be insignificant on land and water use and on terrestrial and aquatic ecosystems. No significant socioeconomic impacts should occur from either construction or operation of the facility. Some conservative accident scenarios depict significant releases of radioactivity. Effects should be localized and would not be severe for all but the most unlikely of such incidents. No significant long-term commitment of resources is expected to be required for the project. Nor are any large quantities of scarce or critical resources likely to be irreversibly or irretrievably committed to the project. Principal alternatives considered were: relocation of the project site, postponement of the project schedule, project cancellation, and chemical process variations

  12. Using Nanomaterials to Solve Environmental Problems: Advancing the Science and Engineering of Photocatalysis

    Science.gov (United States)

    Brame, Jonathon Andrew

    , defining niches where photocatalysis can be superiorly effective, engineering reactor systems that enable real-world testing of this technology, and increasing understanding of photocatalytic inhibition mechanisms, photocatalysis can become a tool to help solve global water challenges.

  13. Biomechanical effects of environmental and engineered particles on human airway smooth muscle cells.

    Science.gov (United States)

    Berntsen, P; Park, C Y; Rothen-Rutishauser, B; Tsuda, A; Sager, T M; Molina, R M; Donaghey, T C; Alencar, A M; Kasahara, D I; Ericsson, T; Millet, E J; Swenson, J; Tschumperlin, D J; Butler, J P; Brain, J D; Fredberg, J J; Gehr, P; Zhou, E H

    2010-06-06

    The past decade has seen significant increases in combustion-generated ambient particles, which contain a nanosized fraction (less than 100 nm), and even greater increases have occurred in engineered nanoparticles (NPs) propelled by the booming nanotechnology industry. Although inhalation of these particulates has become a public health concern, human health effects and mechanisms of action for NPs are not well understood. Focusing on the human airway smooth muscle cell, here we show that the cellular mechanical function is altered by particulate exposure in a manner that is dependent upon particle material, size and dose. We used Alamar Blue assay to measure cell viability and optical magnetic twisting cytometry to measure cell stiffness and agonist-induced contractility. The eight particle species fell into four categories, based on their respective effect on cell viability and on mechanical function. Cell viability was impaired and cell contractility was decreased by (i) zinc oxide (40-100 nm and less than 44 microm) and copper(II) oxide (less than 50 nm); cell contractility was decreased by (ii) fluorescent polystyrene spheres (40 nm), increased by (iii) welding fumes and unchanged by (iv) diesel exhaust particles, titanium dioxide (25 nm) and copper(II) oxide (less than 5 microm), although in none of these cases was cell viability impaired. Treatment with hydrogen peroxide up to 500 microM did not alter viability or cell mechanics, suggesting that the particle effects are unlikely to be mediated by particle-generated reactive oxygen species. Our results highlight the susceptibility of cellular mechanical function to particulate exposures and suggest that direct exposure of the airway smooth muscle cells to particulates may initiate or aggravate respiratory diseases.

  14. Present stage of the use of radioactive tracers in studies carried out at Companhia de Tecnologia de Saneamento Ambiental, SP, Brazil, in the field of environmental engineering

    International Nuclear Information System (INIS)

    Sanchez, W.; Agudo, E.G.

    1979-01-01

    Studies using radioactive tracers in the field of environmental engineering, carried out at Companhia de Tecnologia de Saneamento Ambiental, SP, Brazil, from 1975 to 1978 are presented. Future research to be developed in this area is also discussed. (M.A.) [pt

  15. Environmental Assessment For Cleanup and Closure of the Energy Technology Engineering Center. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2003-03-01

    DOE analyzed two cleanup and closure alternatives and the No Action Alternative, in accordance with the Council on Environmental Quality regulations implementing NEPA (40 CFR Parts 1500-1508) and DOE's NEPA implementing regulations (10 CFR Part 1021). Under Alternative 1, DOE is proposing to clean up the remaining ETEC facilities using the existing site specific cleanup standard of 15 mrem/yr. (plus DOE's As Low As Reasonably Achievable--ALARA-principle) for decontamination of radiological facilities and surrounding soils (Alternative 1). An annual 15-millirem additional radiation dose to the maximally exposed individual (assumed to be an individual living in a residential setting on Area IV) from all exposure pathways (air, soil, groundwater) equates to an additional theoretical lifetime cancer risk of no more than 3 x 10-4 (3 in 10,000). For perspective, it is estimated that the average individual in the United States receives a dose of about 300 millirem each year from natural sources of radiation. However, actual exposures generally will be much lower as a result of the application of the ''as low as reasonably achievable'' (ALARA) principle. Based on post-remediation verification sampling previous cleanups have generally resulted in a 2 x 10-6 level of residual risk. DOE would decontaminate, decommission, and demolish the remaining radiological facilities. DOE would also decommission and demolish the one remaining sodium facility and all of the remaining uncontaminated support buildings for which it is responsible. The ongoing RCRA corrective action program, including groundwater treatment (interim measures), would continue. Other environmental impacts would include 2.5 x 10-3 fatalities as a result of LLW shipments and 6.0 x 10-3 fatalities as a result of emission exhaust from all shipments. DOE would also decommission and demolish the remaining sodium facility and decommission and

  16. Regulated and unregulated emissions from highway heavy-duty diesel engines complying with U.S. Environmental Protection Agency 2007 emissions standards.

    Science.gov (United States)

    Khalek, Imad A; Bougher, Thomas L; Merritt, Patrick M; Zielinska, Barbara

    2011-04-01

    As part of the Advanced Collaborative Emissions Study (ACES), regulated and unregulated exhaust emissions from four different 2007 model year U.S. Environmental Protection Agency (EPA)-compliant heavy-duty highway diesel engines were measured on an engine dynamometer. The engines were equipped with exhaust high-efficiency catalyzed diesel particle filters (C-DPFs) that are actively regenerated or cleaned using the engine control module. Regulated emissions of carbon monoxide, nonmethane hydrocarbons, and particulate matter (PM) were on average 97, 89, and 86% lower than the 2007 EPA standard, respectively, and oxides of nitrogen (NOx) were on average 9% lower. Unregulated exhaust emissions of nitrogen dioxide (NO2) emissions were on, average 1.3 and 2.8 times higher than the NO, emissions reported in previous work using 1998- and 2004-technology engines, respectively. However, compared with other work performed on 1994- to 2004-technology engines, average emission reductions in the range of 71-99% were observed for a very comprehensive list of unregulated engine exhaust pollutants and air toxic contaminants that included metals and other elements, elemental carbon (EC), inorganic ions, and gas- and particle-phase volatile and semi-volatile organic carbon (OC) compounds. The low PM mass emitted from the 2007 technology ACES engines was composed mainly of sulfate (53%) and OC (30%), with a small fraction of EC (13%) and metals and other elements (4%). The fraction of EC is expected to remain small, regardless of engine operation, because of the presence of the high-efficiency C-DPF in the exhaust. This is different from typical PM composition of pre-2007 engines with EC in the range of 10-90%, depending on engine operation. Most of the particles emitted from the 2007 engines were mainly volatile nuclei mode in the sub-30-nm size range. An increase in volatile nanoparticles was observed during C-DPF active regeneration, during which the observed particle number was

  17. Rock Magnetic Characterization of fine Particles from car Engines, Break pads and Tobacco: An Environmental Pilot Study

    Science.gov (United States)

    Herrero-Bervera, E.; Lopez, V. A.; Gerstnecker, K.; Swilley, B.

    2017-12-01

    Today, it is very well known that small magnetic particles are very harmful to the health of humans. For the first time we have conducted an environmental pilot study of fine magnetic particles on the island of Oahu, Hawaii, of particulate matter (pm) 60, pm=10, and pm= 2.5. In order to do a rock magnetic characterization we have preformed low field susceptibility versus temperature (k-T) experiments to determine the Curie points of small particles collected from exhaust pipes, as well as from brake pads of 4 different types of car engines using octane ratings of 85, 87 and 92. The Curie point determinations are very well defined and range from 292 °C through 393 °C to 660 °C. In addition, we have conducted magnetic granulometry experiments on raw tobacco, burnt ashes as well as on car engines and brake pads in question. The results of the experiments show ferro- and ferrimagnetic hysteresis loops with magnetic grain sizes ranging from superparamagnetic-multidomain (SP_MD), multi-domain (MD) and pseudo-single domain (PSD) shown on the modified Day et al. diagram of Dunlop (2002). Thus far, the results we have obtained from this pilot study are in agreement with other studies conducted from cigarette ashes from Bulgaria (Jordanova et al., 2005). Our results could be correlated to the traffic-related PM in Rome, Italy where the SP fraction mainly occurs as coating of MD particles that originated by localized stress in the oxidized outer shell surrounding the unoxidized core of magnetite like grains as published by Sagnotti and Winkler (2012).

  18. Effects of engineered nano-titanium dioxide on pore surface properties and phosphorus adsorption of sediment: Its environmental implications

    International Nuclear Information System (INIS)

    Luo, Zhuanxi; Wang, Zhenhong; Wei, QunShan; Yan, Changzhou; Liu, Feng

    2011-01-01

    Highlights: → The attachment of Enano-TiO 2 to surface enhanced markedly sediment BET surface area and t-Plot external surface area. → The fill of Enano-TiO 2 into the micropores reduced significantly the sediment t-Plot micropore surface area. → Enano-TiO 2 could increase sediment phosphorus (P) adsorption maximum and decrease in sediment P binding energy. → P would be easily released because of the decreasing P binding energy of the sediment with elevated Enano-TiO 2 . - Abstract: Understanding the environmental safety and human health implications of engineered nanoparticles (ENPs) is of worldwide importance. As an important ENPs, engineered nano-TiO 2 (Enano-TiO 2 ) may have been substantially deposited in aquatic sediments because of its widely uses. Sediment pore surface properties would be thus significantly influenced due to the large surface area of Enano-TiO 2 . In this study, Enano-TiO 2 was found to greatly impact on sediment pore surface properties. The attachment of Enano-TiO 2 particles to sediment surfaces enhanced markedly BET specific surface area and t-Plot external specific surface area, and thereby increased sediment phosphorus (P) adsorption maximum (S max ). Contrarily, the fill of Enano-TiO 2 particles into the micropores of sediments could significantly reduce t-Plot micropore specific surface area, and cause slight decrease in sediment P binding energy (K). Clearly, P sorbed in sediment would be easily released because of the decreasing P binding energy of the sediment with elevated Enano-TiO 2 . Enano-TiO 2 would thus cause aggravated endogenous pollution in water if such sediment was re-suspended on disturbance. The results obtained in this study contribute to our increasing knowledge of how to regulate physicochemical behavior of pollutants in sediments under the influences of Enano-TiO 2 and/or similar ENPs.

  19. Development of a comprehensive source term model for the Subsurface Disposal Area at the Idaho National Engineering and Environmental Laboratory

    International Nuclear Information System (INIS)

    1997-01-01

    The first detailed comprehensive simulation study to evaluate fate and transport of wastes disposed in the Subsurface Disposal Area (SDA), at the Radioactive Waste Management Complex (RWMC), Idaho National Engineering and Environmental Laboratory (INEEL) has recently been conducted. One of the most crucial parts of this modeling was the source term or release model. The current study used information collected over the last five years defining contaminant specific information including: the amount disposed, the waste form (physical and chemical properties) and the type of container used for each contaminant disposed. This information was used to simulate the release of contaminants disposed in the shallow subsurface at the SDA. The DUST-MS model was used to simulate the release. Modifications were made to allow the yearly disposal information to be incorporated. The modeling includes unique container and release rate information for each of the 42 years of disposal. The results from this simulation effort are used for both a groundwater and a biotic uptake evaluation. As part of this modeling exercise, inadequacies in the available data relating to the release of contaminants have been identified. The results from this modeling study have been used to guide additional data collection activities at the SDA for purposes of increasing confidence in the appropriateness of model predictions

  20. Environmental guidelines for reuse of ash in civil engineering applications - phase 2; Miljoeriktlinjer foer askanvaendning i anlaeggningsbyggande - etapp 2

    Energy Technology Data Exchange (ETDEWEB)

    Bendz, David; Wik, Ola; Elert, Mark; Haakansson, Karsten

    2006-07-15

    Producers, authorities and users have acknowledged the need for common environmental guidelines for residues. The objective of this project has been to develop a proposal for common environmental guidelines for reuse of ash in civil engineering applications. The project has a narrow risk assessment perspective and focus on a set of substances where a well developed environmental policy and knowledge are available. Health aspects for construction workers are not covered in the project. The starting point in the risk assessment is the assumption that ashes may be used just like any conventional construction material. Special requirements or regulations regarding precautionary actions in the handling of ashes, regarding the site or surroundings will be avoided. The guiding principle has been the precautionary principle: reuse of ash is acceptable only if it constitute an insignificant risk to health and environment. The calculations are based on defined emission- and exposure scenarios. The concept of insignificant risk imply that the impact in the defined points of compliance does not exceed established health- and environmental criteria. The model address health risks associated with spreading of particles and exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berries and consumption of ground water. Off-site environmental effects in surface waters and in soil as well as health- and environmental risks in the post use phase are also considered. Exposure by dust is addressed in the same way as in the Swedish Environmental Protection Agency's guidelines for contaminated soil. The guidelines values for exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berries are total content, whereas the guidelines for exposure by consumption of ground water or environmental effects in surface waters are based on leaching properties of the ash. The guidelines rely on a conceptual model, defined emissions and

  1. Environmental Analysis

    Science.gov (United States)

    1980-01-01

    Burns & McDonnell Engineering's environmental control study is assisted by NASA's Computer Software Management and Information Center's programs in environmental analyses. Company is engaged primarily in design of such facilities as electrical utilities, industrial plants, wastewater treatment systems, dams and reservoirs and aviation installations. Company also conducts environmental engineering analyses and advises clients as to the environmental considerations of a particular construction project. Company makes use of many COSMIC computer programs which have allowed substantial savings.

  2. Pacific Northwest Laboratory annual report for 1982 to the DOE Office of the Assistant Secretary for Environmental Protection, Safety and Emergency Preparedness. Part 5. Environmental and occupational protection, assessment, and engineering

    International Nuclear Information System (INIS)

    Bair, W.J.

    1983-02-01

    Part 5 of the 1982 Annual Report to the Department of Energy's Office of Environmental Protection, Safety and Emergency Preparedness presents Pacific Northwest Laboratory's progress on work performed for the Office of Environmental Programs, Office of Operational Safety, and the Office of Nuclear Safety. The report is in three sections, introduced by blue divider pages, corresponding to the program elements: Technology Impacts, Environmental and Safety Engineering, Operational and Environmental Safety. In each section, articles describe progress made during FY 1982 on individual projects, as identified by the Field Task Proposal/Agreement. Authors of these articles represent a broad spectrum of capabilities derived from various segments of the Laboratory, reflecting the interdisciplinary nature of the work

  3. Are engineered nano iron oxide particles safe? an environmental risk assessment by probabilistic exposure, effects and risk modeling.

    Science.gov (United States)

    Wang, Yan; Deng, Lei; Caballero-Guzman, Alejandro; Nowack, Bernd

    2016-12-01

    Nano iron oxide particles are beneficial to our daily lives through their use in paints, construction materials, biomedical imaging and other industrial fields. However, little is known about the possible risks associated with the current exposure level of engineered nano iron oxides (nano-FeOX) to organisms in the environment. The goal of this study was to predict the release of nano-FeOX to the environment and assess their risks for surface waters in the EU and Switzerland. The material flows of nano-FeOX to technical compartments (waste incineration and waste water treatment plants) and to the environment were calculated with a probabilistic modeling approach. The mean value of the predicted environmental concentrations (PECs) of nano-FeOX in surface waters in the EU for a worst-case scenario (no particle sedimentation) was estimated to be 28 ng/l. Using a probabilistic species sensitivity distribution, the predicted no-effect concentration (PNEC) was determined from ecotoxicological data. The risk characterization ratio, calculated by dividing the PEC by PNEC values, was used to characterize the risks. The mean risk characterization ratio was predicted to be several orders of magnitude smaller than 1 (1.4 × 10 - 4 ). Therefore, this modeling effort indicates that only a very limited risk is posed by the current release level of nano-FeOX to organisms in surface waters. However, a better understanding of the hazards of nano-FeOX to the organisms in other ecosystems (such as sediment) needs to be assessed to determine the overall risk of these particles to the environment.

  4. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement. Volume 1, Appendix D, Part B: Naval spent nuclear fuel management

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    This volume contains the following attachments: transportation of Naval spent nuclear fuel; description of Naval spent nuclear receipt and handling at the Expended Core Facility at the Idaho National Engineering Laboratory; comparison of storage in new water pools versus dry container storage; description of storage of Naval spent nuclear fuel at servicing locations; description of receipt, handling, and examination of Naval spent nuclear fuel at alternate DOE facilities; analysis of normal operations and accident conditions; and comparison of the Naval spent nuclear fuel storage environmental assessment and this environmental impact statement.

  5. Applications of neural networks in environmental and energy sciences and engineering. Proceedings of the 1995 workshop on environmental and energy applications of neural networks

    Energy Technology Data Exchange (ETDEWEB)

    Hashem, S.; Keller, P.E.; Kouzes, R.T.; Kangas, L.J.

    1995-12-31

    These proceedings contain edited versions of the technical presentations of the Workshop on Environmental and Energy Applications of Neural Networks, held on March 30--31, 1995, in Richland, Washington. The purpose of the workshop was to provide a forum for discussing environmental, energy, and biomedical applications of neural networks. Panels were held to discuss various research and development issues relating to real-world applications in each of the three areas. The applications covered in the workshop were: Environmental applications -- modeling and predicting soil, air and water pollution, environmental sensing, spectroscopy, hazardous waste handling and cleanup; Energy applications -- process monitoring and optimization of power systems, modeling and control of power plants, environmental monitoring for power systems, power load forecasting, fault location and diagnosis of power systems; and Biomedical applications -- medical image and signal analysis, medical diagnosis, analysis of environmental health effects, and modeling biological systems. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  6. Department of Civil Engineering,

    African Journals Online (AJOL)

    USER

    2015-03-02

    Mar 2, 2015 ... Department of Civil Engineering, Faculty of Engineering, Universiti Putra, Malaysia,. Selangor, Malaysia. 2. Department of Environmental and Chemical Engineering, Faculty of Engineering, Universiti. Putra, Malaysia, Selangor, Malaysia. 3. Department of Civil Engineering, Federal University of Technology, ...

  7. Analyzing Citation and Research Collaboration Characteristics of Faculty in Aerospace, Civil and Environmental, Electrical and Computer, and Mechanical Engineering

    Science.gov (United States)

    Zhang, Li

    2018-01-01

    This article investigates citation and research collaboration habits of faculty in four engineering departments. The analysis focuses on similarities and differences among the engineering disciplines. Main differences exist in the use of conference papers and technical reports. The age of cited materials varies by discipline and by format.…

  8. The Use of Engineering Design Scenarios to Assess Student Knowledge of Global, Societal, Economic, and Environmental Contexts

    Science.gov (United States)

    McKenna, Ann F.; Hynes, Morgan M.; Johnson, Amy M.; Carberry, Adam R.

    2016-01-01

    Product archaeology as an educational approach asks engineering students to consider and explore the broader societal and global impacts of a product's manufacturing, distribution, use, and disposal on people, economics, and the environment. This study examined the impact of product archaeology in a project-based engineering design course on…

  9. Geo-engineering: effective climate protection or megalomania? Methods, legal frameworks, environmental political claims; Geo-Engineering: wirksamer Klimaschutz oder Groessenwahn? Methoden, Rechtliche Rahmenbedingungen, Umweltpolitische Forderungen

    Energy Technology Data Exchange (ETDEWEB)

    Ginzky, Harald; Herrmann, Friederike; Kartschall, Karin; Leujak, Wera; Lipsius, Kai; Maeder, Claudia; Schwermer, Sylvia; Straube, Georg

    2011-04-15

    Today, strategies for climate protection use two main approaches. First, measures should be taken in order to reduce greenhouse gas emissions caused by humans. Second, measures should be carried out so that people and the environment can be adapted to unavoidable climatic changes. For some time, proposals are being discussed in order to meet the effect of climatic changes by large-scale intervention in global ecological processes. These measures are grouped under the term geo-engineering.

  10. Tools for enhancing motivation in teaching climate change and impacts for students in forest- and environmental engineering

    Science.gov (United States)

    Gálos, Borbála

    2017-04-01

    Climate change is observed to have severe impacts on forest ecosystems. Ongoing research projects are dealing with the complex analysis of the causes of the health status decline and mortality of the vulnerable tree species. In the Carpathian Basin, recurrent long lasting drought periods and heatwaves of the last decades initiated the sequence of abiotic and biotic impacts in the beech and oak forests. Threatening extreme events are very likely to occur more frequent under changing climate conditions until the end of the 21st century. Therefore adaptation strategies and renewed regulations of the tree species selection are necessary. Learning material of forest education needs to be continuously updated with the new aspects and results of recent research and forest management planning. Therefore ideas and tools have been developed for teaching climate change impacts for students in forest- and environmental engineering. Using examples from world sport championships (e.g. losers and winners of climate change) these tools are applied to communicate the basic research questions in an easily understandable way as well as to motivate students and raise their awareness for the complex processes of forest - climate interactions. By the application of the developed examples for motivation, the key competences and learning outcomes can be the following: • students get an insight into the observed and projected tendencies of climate extremes; • they get an impression on the complexity of the climate change related damage chains; • they will be able to identify the climatic drivers of forest decline and mortality; • with the skill of critical thinking they will be able to evaluate the ecological role of forests that are already affected and that could be affected by the consequences of changing climate conditions; • they recognize the importance and urgency of the appropriate decisions in forestry and nature conservation. Keywords: climate change impacts, forest

  11. Pacific Northwest Laboratory annual report for 1981 to the DOE Office of the Assistant Secretary for Environmental Protection, Safety and Emergency Preparedness. Part 5. Environmental and occupational protection, assessment, and engineering

    International Nuclear Information System (INIS)

    Glass, W.A.

    1982-02-01

    This report describes research in environment, health, and safety conducted during fiscal year 1981. The five parts of the report are oriented to particular segments of the program. Parts 1 to 4 report on research performed for the DOE Office of Health and Environmental Research in the Office of Energy Research. Part 5 reports progress on all research performed for the Office of the Assistant Secretary for Environmental Protection, Safety and Emergency Preparedness. The parts are: Part 1: Biomedical Sciences under Program Manager, H. Drucker; Part 2: Ecological Sciences, under Program Manager, B.E. Vaughan; Part 3: Atmospheric Sciences under Program Manager, C.E. Elderkin; Part 4: Physical Sciences under Program Manager, J.M. Nielsen; and Part 5: Environmental and Occupational Protection, Assessment, and Engineering under Program Managers, D.L. Hessel, S. Marks, and W.A. Glass

  12. Pacific Northwest Laboratory annual report for 1981 to the DOE Office of the Assistant Secretary for Environmental Protection, Safety and Emergency Preparedness. Part 5. Environmental and occupational protection, assessment, and engineering

    Energy Technology Data Exchange (ETDEWEB)

    Glass, W.A.

    1982-02-01

    This report describes research in environment, health, and safety conducted during fiscal year 1981. The five parts of the report are oriented to particular segments of the program. Parts 1 to 4 report on research performed for the DOE Office of Health and Environmental Research in the Office of Energy Research. Part 5 reports progress on all research performed for the Office of the Assistant Secretary for Environmental Protection, Safety and Emergency Preparedness. The parts are: Part 1: Biomedical Sciences under Program Manager, H. Drucker; Part 2: Ecological Sciences, under Program Manager, B.E. Vaughan; Part 3: Atmospheric Sciences under Program Manager, C.E. Elderkin; Part 4: Physical Sciences under Program Manager, J.M. Nielsen; and Part 5: Environmental and Occupational Protection, Assessment, and Engineering under Program Managers, D.L. Hessel, S. Marks, and W.A. Glass.

  13. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement. Volume 1, Appendix C, Savannah River Site Spent Nuclear Fuel Mangement Program

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    The US Department of Energy (DOE) is engaged in two related decision making processes concerning: (1) the transportation, receipt, processing, and storage of spent nuclear fuel (SNF) at the DOE Idaho National Engineering Laboratory (INEL) which will focus on the next 10 years; and (2) programmatic decisions on future spent nuclear fuel management which will emphasize the next 40 years. DOE is analyzing the environmental consequences of these spent nuclear fuel management actions in this two-volume Environmental Impact Statement (EIS). Volume 1 supports broad programmatic decisions that will have applicability across the DOE complex and describes in detail the purpose and need for this DOE action. Volume 2 is specific to actions at the INEL. This document, which limits its discussion to the Savannah River Site (SRS) spent nuclear fuel management program, supports Volume 1 of the EIS. Following the introduction, Chapter 2 contains background information related to the SRS and the framework of environmental regulations pertinent to spent nuclear fuel management. Chapter 3 identifies spent nuclear fuel management alternatives that DOE could implement at the SRS, and summarizes their potential environmental consequences. Chapter 4 describes the existing environmental resources of the SRS that spent nuclear fuel activities could affect. Chapter 5 analyzes in detail the environmental consequences of each spent nuclear fuel management alternative and describes cumulative impacts. The chapter also contains information on unavoidable adverse impacts, commitment of resources, short-term use of the environment and mitigation measures.

  14. The role of environmental factors in regulating the development of cartilaginous grafts engineered using osteoarthritic human infrapatellar fat pad-derived stem cells.

    Science.gov (United States)

    Liu, Yurong; Buckley, Conor T; Downey, Richard; Mulhall, Kevin J; Kelly, Daniel J

    2012-08-01

    Engineering functional cartilaginous grafts using stem cells isolated from osteoarthritic human tissue is of fundamental importance if autologous tissue engineering strategies are to be used in the treatment of diseased articular cartilage. It has previously been demonstrated that human infrapatellar fat pad (IFP)-derived stem cells undergo chondrogenesis in pellet culture; however, the ability of such cells to generate functional cartilaginous grafts has not been adequately addressed. The objective of this study was to explore how environmental conditions regulate the functional development of cartilaginous constructs engineered using diseased human IFP-derived stem cells (FPSCs). FPSCs were observed to display a diminished chondrogenic potential upon encapsulation in a three-dimensional hydrogel compared with pellet culture, synthesizing significantly lower levels of glycosaminoglycan and collagen on a per cell basis. To engineer more functional cartilaginous grafts, we next explored whether additional biochemical and biophysical stimulations would enhance chondrogenesis within the hydrogels. Serum stimulation was observed to partially recover the diminished chondrogenic potential within hydrogel culture. Over 42 days, stem cells that had first been expanded in a low-oxygen environment proliferated extensively on the outer surface of the hydrogel in response to serum stimulation, assembling a dense type II collagen-positive cartilaginous tissue resembling that formed in pellet culture. The application of hydrostatic pressure did not further enhance extracellular matrix synthesis within the hydrogels, but did appear to alter the spatial accumulation of extracellular matrix leading to the formation of a more compact tissue with superior mechanically functionality. Further work is required in order to recapitulate the environmental conditions present during pellet culture within scaffolds or hydrogels in order to engineer more functional cartilaginous grafts using

  15. The Effects of Environmental Factors on Smooth Muscle Cells Differentiation from Adipose-Derived Stem Cells and Esophagus Tissues Engineering

    DEFF Research Database (Denmark)

    Wang, Fang

    Adipose-derived stem cells (ASCs) are increasingly being used for regenerative medicine and tissue engineering. Smooth muscle cells (SMCs) can be differentiated from ASCs. Oxygen is a key factor influencing the stem cell differentiation. Tissue engineered esophagus has been a preferred solution...... of esophagus was studied. Our results showed that both SMCs and ASCs could attach on the porcine esophageal acellular matrix (EAM) scaffold in vitro after 24 hours and survive until 7 days. Thus ASCs might be a substitute for SMCs in the construction of tissue engineered esophageal muscle layer....

  16. Environmental effect of antioxidant additives on exhaust emission reduction in compression ignition engine fuelled with Annona methyl ester.

    Science.gov (United States)

    Senthil, R; Silambarasan, R

    2015-01-01

    The aim of the present study is to analyse the effect of antioxidant l-ascorbic acid on engine performance and emissions of a diesel engine fuelled with methyl ester of Annona oil (MEAO). The antioxidant is mixed in various concentrations (100-400 mg) with MEAO. Result shows that the antioxidant additive mixture (MEAO+LA200) is effective in control of nitrogen oxides (NOx) and hydrocarbon (HC) emission of MEAO-fuelled engine without doing any engine modification. In this study by using MEAO, the NOx emission is reduced by about 23.38% at full load while compared with neat diesel fuel. Likewise there is a reduction in carbon monoxide, smoke, and HC by about 48%, 28.57% and 29.71% at full load condition compared with neat diesel fuel.

  17. Final environmental impact statement for the construction and operation of an independent spent fuel storage installation to store the Three Mile Island Unit 2 spent fuel at the Idaho National Engineering and Environmental Laboratory. Docket Number 72-20

    International Nuclear Information System (INIS)

    1998-03-01

    This Final Environmental Impact Statement (FEIS) contains an assessment of the potential environmental impacts of the construction and operation of an Independent Spent Fuel Storage Installation (ISFSI) for the Three Mile Island Unit 2 (TMI-2) fuel debris at the Idaho National Engineering and Environmental laboratory (INEEL). US Department of Energy-Idaho Operations Office (DOE-ID) is proposing to design, construct, and operate at the Idaho Chemical Processing Plant (ICPP). The TMI-2 fuel debris would be removed from wet storage, transported to the ISFSI, and placed in storage modules on a concrete basemat. As part of its overall spent nuclear fuel (SNF) management program, the US DOE has prepared a final programmatic environmental impact statement (EIS) that provides an overview of the spent fuel management proposed for INEEL, including the construction and operation of the TMI-2 ISFSI. In addition, DOE-ID has prepared an environmental assessment (EA) to describe the environmental impacts associated with the stabilization of the storage pool and the construction/operation of the ISFSI at the ICPP. As provided in NRC's NEPA procedures, a FEIS of another Federal agency may be adopted in whole or in part in accordance with the procedures outlined in 40 CFR 1506.3 of the regulations of the Council on Environmental Quality (CEQ). Under 40 CFR 1506.3(b), if the actions covered by the original EIS and the proposed action are substantially the same, the agency adopting another agency's statement is not required to recirculate it except as a final statement. The NRC has determined that its proposed action is substantially the same as actions considered in DOE's environmental documents referenced above and, therefore, has elected to adopt the DOE documents as the NRC FEIS

  18. Engineering assessment and feasibility study of Chattanooga Shale as a future source of uranium. [Environmental, socioeconomic, regulatory impacts

    Energy Technology Data Exchange (ETDEWEB)

    1978-06-01

    This volume characterizes the major baseline environmental features of the Chattanooga Shale study and projects the effects which may accrue from implementation of a large scale development to recover uranium from the shale. Environmental, socioeconomic, and regulatory impacts are covered. The prototype project is located in Dekalb County in Tennessee. (DLC)

  19. An interdisciplinary complex problem as a starting point for learning: Impact of the PBL method in second-year Environmental engineering students

    Directory of Open Access Journals (Sweden)

    E. Saez de Camara

    2015-09-01

    Full Text Available Three courses of the second year degree in Environmental Engineering (Geology and Pedology, Ecology and Economics and Business Administration have been remodeled using the Problem-Based Learning methodology. The proposed problem is a real-life and integrative problem related to their specialization which must be solved in these three courses at the same time. The results reveal that during this experience students were considerably more active, cooperative and involved, and the success rate doubled that of similar engineering courses of the Faculty. Regarding students’ opinion, it should be emphasized that they perceive that this method is functional and encouraging. A high percentage of the students describe the experience as positive or very positive. Additionally, they stated that the Problem-Based Learning promoted the development of skills that, in their own view, are essential for their career, such as teamwork and communication.

  20. Process Description and Operating History for the CPP-601/-640/-627 Fuel Reprocessing Complex at the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    E. P. Wagner

    1999-06-01

    The Fuel Reprocessing Complex (FRC) at the Idaho Nuclear Technology and Engineering Center at the Idaho National Engineering and Environmental Laboratory was used for reprocessing spent nuclear fuel from the early 1950's until 1992. The reprocessing facilities are now scheduled to be deactivated. As part of the deactivation process, three Resource Conservation and Recovery Act (RCRA) interim status units located in the complex must be closed. This document gathers the historical information necessary to provide a rational basis for the preparation of a comprehensive closure plan. Included are descriptions of process operations and the operating history of the FRC. A set of detailed tables record the service history and present status of the process vessels and transfer lines.

  1. Simulation of water-surface elevations for a hypothetical 100-year peak flow in Birch Creek at the Idaho National Engineering and Environmental Laboratory, Idaho

    International Nuclear Information System (INIS)

    Berenbrock, C.; Kjelstrom, L.C.

    1997-01-01

    Delineation of areas at the Idaho National Engineering and Environmental Laboratory that would be inundated by a 100-year peak flow in Birch Creek is needed by the US Department of Energy to fulfill flood-plain regulatory requirements. Birch Creek flows southward about 40 miles through an alluvium-filled valley onto the northern part of the Idaho National Engineering and Environmental laboratory site on the eastern Snake River Plain. The lower 10-mile reach of Birch Creek that ends in Birch Creek Playa near several Idaho National Engineering and Environmental Laboratory facilities is of particular concern. Twenty-six channel cross sections were surveyed to develop and apply a hydraulic model to simulate water-surface elevations for a hypothetical 100-year peak flow in Birch Creek. Model simulation of the 100-year peak flow (700 cubic feet per second) in reaches upstream from State Highway 22 indicated that flow was confined within channels even when all flow was routed to one channel. Where the highway crosses Birch Creek, about 315 cubic feet per second of water was estimated to move downstream--115 cubic feet per second through a culvert and 200 cubic feet per second over the highway. Simulated water-surface elevation at this crossing was 0.8 foot higher than the elevation of the highway. The remaining 385 cubic feet per second flowed southwestward in a trench along the north side of the highway. Flow also was simulated with the culvert removed. The exact location of flood boundaries on Birch Creek could not be determined because of the highly braided channel and the many anthropogenic features (such as the trench, highway, and diversion channels) in the study area that affect flood hydraulics and flow. Because flood boundaries could not be located exactly, only a generalized flood-prone map was developed

  2. The Positive Influence of Active Learning in a Lecture Hall: An Analysis of Normalised Gain Scores in Introductory Environmental Engineering

    Science.gov (United States)

    Kinoshita, Timothy J.; Knight, David B.; Gibbes, Badin

    2017-01-01

    Burgeoning college enrolments and insufficient funding to higher education have expanded the use of large lecture courses. As this trend continues, it is important to ensure that students can still learn in those challenging learning environments. Within education broadly and undergraduate engineering specifically, active learning pedagogies have…

  3. Influence of environmental parameters and of their interactions on the release of metal(loid)s from a construction material in hydraulic engineering.

    Science.gov (United States)

    Schmukat, A; Duester, L; Goryunova, E; Ecker, D; Heininger, P; Ternes, T A

    2016-03-05

    Besides the leaching behaviour of a construction material under standardised test-specific conditions with laboratory water, for some construction materials it is advisable to test their environmental behaviour also under close to end use conditions. The envisaged end use combined with the product characteristics (e.g. mineral phases) is decisive for the choice of environmental factors that may change the release of substance that potentially cause adverse environmental effects (e.g. fertilisation or ecotoxicity). At the moment an experimental link is missing between mono-factorial standardised test systems and non standardised complex incubation experiments such as mesocosms which are closer to environmental conditions. Multi-factorial batch experiments may have the potential to close the gap. To verify this, batch experiments with copper slag were performed which is used as armour stones in hydraulic engineering. Design of experiments (DoE) was applied to evaluate the impact of pH, ionic strength, temperature and sediment content on the release of As, Cu, Mo, Ni, Pb, Sb and Zn. The study shows that release and sediment-eluent partitioning of metal(loid)s are impacted by interactions between the studied factors. Under the prevalent test conditions sediment acts as a sink enhancing most strongly the release of elements from the material. Copyright © 2015 Elsevier B.V. All rights reserved.

  4. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs, Draft Environmental Impact Statement. Volume 1, Appendix D: Part A, Naval Spent Nuclear Fuel Management

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    Volume 1 to the Department of Energy`s Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Management Programs Environmental Impact Statement evaluates a range of alternatives for managing naval spent nuclear fuel expected to be removed from US Navy nuclear-powered vessels and prototype reactors through the year 2035. The Environmental Impact Statement (EIS) considers a range of alternatives for examining and storing naval spent nuclear fuel, including alternatives that terminate examination and involve storage close to the refueling or defueling site. The EIS covers the potential environmental impacts of each alternative, as well as cost impacts and impacts to the Naval Nuclear Propulsion Program mission. This Appendix covers aspects of the alternatives that involve managing naval spent nuclear fuel at four naval shipyards and the Naval Nuclear Propulsion Program Kesselring Site in West Milton, New York. This Appendix also covers the impacts of alternatives that involve examining naval spent nuclear fuel at the Expended Core Facility in Idaho and the potential impacts of constructing and operating an inspection facility at any of the Department of Energy (DOE) facilities considered in the EIS. This Appendix also considers the impacts of the alternative involving limited spent nuclear fuel examinations at Puget Sound Naval Shipyard. This Appendix does not address the impacts associated with storing naval spent nuclear fuel after it has been inspected and transferred to DOE facilities. These impacts are addressed in separate appendices for each DOE site.

  5. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Draft Environmental Impact Statement

    International Nuclear Information System (INIS)

    1994-06-01

    This volume addresses the interim storage of spent nuclear fuel (SNF) at two US Department of Energy sites, the Nevada Test Site (NTS) and the Oak Ridge Reservation (ORR). These sites are being considered to provide a reasonable range of alternative settings at which future SNF management activities could be conducted. These locations are not currently involved in management of large quantities of SNF; NTS has none, and ORR has only small quantities. But NTS and ORR do offer experience and infrastructure for the handling, processing and storage of radioactive materials, and they do exemplify a broad spectrum of environmental parameters. This broad spectrum of environmental parameters will provide, a perspective on whether and how such location attributes may relate to potential environmental impacts. Consideration of these two sites will permit a programmatic decision to be based upon an assessment of the feasible options without bias, to the current storage sites. This volume is divided into four parts. Part One is the volume introduction. Part Two contains chapters one through five for the NTS, as well as references contained in chapter six. Part Three contains chapters one through five for the ORR, as well as references contained in chapter six. Part Four is summary information including the list of preparers, organizations contacted, acronyms, and abbreviations for both the NTS and the ORR. A Table of Contents, List of Figures, and List of Tables are included in parts Two, Three, and Four. This approach permitted the inclusion of both sites in one volume while maintaining consistent chapter numbering

  6. Biocatalysis engineering: the big picture.

    Science.gov (United States)

    Sheldon, Roger A; Pereira, Pedro C

    2017-05-22

    In this tutorial review we describe a holistic approach to the invention, development and optimisation of biotransformations utilising isolated enzymes. Increasing attention to applied biocatalysis is motivated by its numerous economic and environmental benefits. Biocatalysis engineering concerns the development of enzymatic systems as a whole, which entails engineering its different components: substrate engineering, medium engineering, protein (enzyme) engineering, biocatalyst (formulation) engineering, biocatalytic cascade engineering and reactor engineering.

  7. Resumption of surrogate testing in the Engineering Demonstration System at the Lawrence Livermore National Laboratory: Environmental assessment

    International Nuclear Information System (INIS)

    1990-04-01

    The Engineering Demonstration System (EDS) is an existing equipment system within the Plutonium Facility at the Lawrence Livermore National Laboratory (LLNL) designed to test the Atomic Vapor Laser Isotope Separation (AVLIS) process for application to the Special Isotope Separation (SIS) program. The proposed action is to resume testing with members of the family of rare-earth metals in the EDS. The purpose of these tests is to train operators, verify operations procedures and obtain information on the engineering design, operational reliability, and separative performance capability of the integrated system hardware. The information to be provided by the EDS tests with the rare-earth metals is needed for engineering and operability evaluation of the prototype AVLIS separator hardware in an integrated system configuration. These evaluations are necessary to demonstrate the technology to the maximum extent possible, short of actual validation with plutonium. The EDS tests to be performed would use single and multiple separator units. Testing would be intermittent in nature, typically consisting of one to two tests per month, with durations ranging from approximately 10 to 200 h. 19 refs., 4 figs., 5 tabs

  8. Training and Mentoring the Next Generation of Scientists and Engineers to Secure Continuity and Successes of the US DOE's Environmental Remediation Efforts - 13387

    International Nuclear Information System (INIS)

    Lagos, L.

    2013-01-01

    The DOE Office of Environmental Management (DOE-EM) oversees one of the largest and most technically challenging cleanup programs in the world. The mission of DOE-EM is to complete the safe cleanup of the environmental legacy from five decades of nuclear weapons development and government-sponsored nuclear energy research. Since 1995, Florida International University's Applied Research Center (FIU-ARC) has supported the DOE-EM mission and provided unique research capabilities to address some of these highly technical and difficult challenges. This partnership has allowed FIU-ARC to create a unique infrastructure that is critical for the training and mentoring of science, technology, engineering, and math (STEM) students and has exposed many STEM students to 'hands-on' DOE-EM applied research, supervised by the scientists and engineers at ARC. As a result of this successful partnership between DOE and FIU, DOE requested FIU-ARC to create the DOE-FIU Science and Technology Workforce Development Initiative in 2007. This innovative program was established to create a 'pipeline' of minority STEM students trained and mentored to enter DOE's environmental cleanup workforce. The program was designed to help address DOE's future workforce needs by partnering with academic, government and private companies (DOE contractors) to mentor future minority scientists and engineers in the research, development, and deployment of new technologies and processes addressing DOE's environmental cleanup challenges. Since its inception in 2007, the program has trained and mentored 78 FIU STEM minority students. Although, the program has been in existence for only five years, a total of 75 internships have been conducted at DOE National Laboratories, DOE sites, DOE Headquarters and field offices, and DOE contractors. Over 85 DOE Fellows have participated in the Waste Management Symposia since 2008 with a total of 68 student posters and 7 oral presentations given at WM. The DOE Fellows

  9. Influence of environmental parameters and of their interactions on the release of metal(loid)s from a construction material in hydraulic engineering

    International Nuclear Information System (INIS)

    Schmukat, A.; Duester, L.; Goryunova, E.; Ecker, D.; Heininger, P.; Ternes, T.A.

    2016-01-01

    Highlights: • DoE supported multi-factorial study on the metal(loid) release from copper slag. • Interactions of four parameters were studied and weighted. • An effective separation method between slag and sediment was established. • The metal(loid) partitioning between sediment, slag and eluent is described. • The knowledge on the potential environmental impact of copper slag is increased. - Abstract: Besides the leaching behaviour of a construction material under standardised test-specific conditions with laboratory water, for some construction materials it is advisable to test their environmental behaviour also under close to end use conditions. The envisaged end use combined with the product characteristics (e.g. mineral phases) is decisive for the choice of environmental factors that may change the release of substance that potentially cause adverse environmental effects (e.g. fertilisation or ecotoxicity). At the moment an experimental link is missing between mono-factorial standardised test systems and non standardised complex incubation experiments such as mesocosms which are closer to environmental conditions. Multi-factorial batch experiments may have the potential to close the gap. To verify this, batch experiments with copper slag were performed which is used as armour stones in hydraulic engineering. Design of experiments (DoE) was applied to evaluate the impact of pH, ionic strength, temperature and sediment content on the release of As, Cu, Mo, Ni, Pb, Sb and Zn. The study shows that release and sediment-eluent partitioning of metal(loid)s are impacted by interactions between the studied factors. Under the prevalent test conditions sediment acts as a sink enhancing most strongly the release of elements from the material.

  10. Influence of environmental parameters and of their interactions on the release of metal(loid)s from a construction material in hydraulic engineering

    Energy Technology Data Exchange (ETDEWEB)

    Schmukat, A., E-mail: schmukat@harzwasserwerke.de [Harzwasserwerke GmbH, Zur Granetalsperre 8, 38685 Langelsheim (Germany); Federal Institute of Hydrology, Department of Aquatic Chemistry, Am Mainzer Tor 1, 56068 Koblenz (Germany); Duester, L. [Federal Institute of Hydrology, Department of Aquatic Chemistry, Am Mainzer Tor 1, 56068 Koblenz (Germany); Goryunova, E. [Federal Institute of Hydrology, Department of Aquatic Chemistry, Am Mainzer Tor 1, 56068 Koblenz (Germany); KAPP-Chemie GmbH & Co. KG, Industriestr. 2-4, 56357 Miehlen (Germany); Ecker, D.; Heininger, P.; Ternes, T.A. [Federal Institute of Hydrology, Department of Aquatic Chemistry, Am Mainzer Tor 1, 56068 Koblenz (Germany)

    2016-03-05

    Highlights: • DoE supported multi-factorial study on the metal(loid) release from copper slag. • Interactions of four parameters were studied and weighted. • An effective separation method between slag and sediment was established. • The metal(loid) partitioning between sediment, slag and eluent is described. • The knowledge on the potential environmental impact of copper slag is increased. - Abstract: Besides the leaching behaviour of a construction material under standardised test-specific conditions with laboratory water, for some construction materials it is advisable to test their environmental behaviour also under close to end use conditions. The envisaged end use combined with the product characteristics (e.g. mineral phases) is decisive for the choice of environmental factors that may change the release of substance that potentially cause adverse environmental effects (e.g. fertilisation or ecotoxicity). At the moment an experimental link is missing between mono-factorial standardised test systems and non standardised complex incubation experiments such as mesocosms which are closer to environmental conditions. Multi-factorial batch experiments may have the potential to close the gap. To verify this, batch experiments with copper slag were performed which is used as armour stones in hydraulic engineering. Design of experiments (DoE) was applied to evaluate the impact of pH, ionic strength, temperature and sediment content on the release of As, Cu, Mo, Ni, Pb, Sb and Zn. The study shows that release and sediment-eluent partitioning of metal(loid)s are impacted by interactions between the studied factors. Under the prevalent test conditions sediment acts as a sink enhancing most strongly the release of elements from the material.

  11. NASA Engineering Design Challenges: Environmental Control and Life Support Systems. Water Filtration Challenge. EG-2008-09-134-MSFC

    Science.gov (United States)

    Schneider, Twila, Ed.

    2010-01-01

    This educator guide is organized into seven chapters: (1) Overview; (2) The Design Challenge; (3) Connections to National Curriculum Standards; (4) Preparing to Teach; (5) Classroom Sessions; (6) Opportunities for Extension; and (7) Teacher Resources. Chapter 1 provides information about Environmental Control and Life Support Systems used on NASA…

  12. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, SWINE WASTE ELECTRIC POWER AND HEAT PRODUCTION--MARTIN MACHINERY INTERNAL COMBUSTION ENGINE

    Science.gov (United States)

    Under EPA’s Environmental Technology Verification program, which provides objective and scientific third party analysis of new technology that can benefit the environment, a combined heat and power system designed by Martin Machinery was evaluated. This paper provides test result...

  13. Urban Environmental Excursions: Designing field trips to demonstrate sustainable connections between natural and engineered systems in urban environments

    Science.gov (United States)

    Lemke, L. D.

    2012-12-01

    Field trips are a proven and effective instructional tool to connect students with the world around them. In most communities, opportunities abound to allow students to make connections between concepts introduced in classroom or lab activities and the urban environment that surrounds them. Potential destinations include solid and liquid waste disposal sites, brownfield redevelopment sites, hazardous waste sites, industrial complexes, or sites with ongoing environmental restoration efforts. Each of these locations presents opportunities to explore sustainable aspects of anthropogenic activities in relation to the natural systems that they seek to modify or exploit. Early planning is essential, however, because it can sometimes take several months lead time to arrange for a large group tour of industrial or municipal sites. Several practices may be employed to design effective learning experiences for students when visiting such sites. These include: 1) choose local sites to keep trips relevant and practical; 2) balance sites of environmental concern with those where significant progress is being made in environmental restoration or stewardship; 3) connect sites with a pertinent theme (e.g., air quality, water quality, economic development, environmental justice, etc.); 4) develop a sense of location among student participants by providing a map showing the relationship between campus and the field sites; 5) prepare a guidebook containing one-page descriptions of each stop along with a list of questions to stimulate discussion and promote active engagement among all participants; 6) employ expert guides to maximize students' access to authoritative information; 7) tie each field experience to your curriculum; and 8) model active learning by asking genuine questions and engaging in open discussions with experts and student participants. In this presentation, urban field trip design will be illustrated with examples from trips run in conjunction with freshman

  14. Life-cycle energy optimisation : A proposed methodology for integrating environmental considerations early in the vehicle engineering design process

    OpenAIRE

    O'Reilly, Ciarán J.; Göransson, Peter; Funazaki, Atsushi; Suzuki, Tetsuya; Edlund, Stefan; Gunnarsson, Cecilia; Lundow, Jan-Olov; Cerin, Pontus; Cameron, Christopher J.; Wennhage, Per; Potting, José

    2016-01-01

    To enable the consideration of life cycle environmental impacts in the early stages of vehicle design, a methodology using the proxy of life cycle energy is proposed in this paper. The trade-offs in energy between vehicle production, operational performance and end-of-life are formulated as a mathematical problem, and simultaneously balanced with other transport-related functionalities, and may be optimised. The methodology is illustrated through an example design study, which is deliberately...

  15. Environmental health engineering students\\' attitudes toward their education program and career in Shahid Sadoughi University of Medical Sciences in 2015

    Directory of Open Access Journals (Sweden)

    M Mirnasab

    2016-07-01

    Full Text Available Introduction: Increasing numbers of medical sciences graduates is counted to be one of the problems in the society, so that there is concerning about their majors and future careers among them. This study was performed with the aim of determining environmental health students' attitude toward their majors and future careers, which was carried out in Yazd University of Medical Sciences in 2015. Method: This analytical, descriptive study was performed in 2015. The samples were Environmental Health students of Yazd University of Medical Sciences. The sample size was 102. Data were collected using a questionnaire containing 20 questions and analyzed by SPSS software version 21, multiple linear regression test, one-sample t-test and Chi-Square test. Results: The mean and standard deviation of environmental students' attitude toward their majors and future careers were 3.16 and 0.66, respectively. Attitude scores more than 3 were considered positive and less than 3 were negative. The mean scores of attitude was significantly higher than 3 (P=0.012. In this study, there was a significant relationship between students’ attitude and location status (P=0.003. Conclusion: According to the obtained results, the students of environment health had a good perspective towards their future careers and majors of study. A proper distribution of human resources, providing financial support of employment, establishing counselling and supporting centers among students for future career is recommended to improve their attitudes.

  16. High Level Waste Tank Farm Replacement Project for the Idaho Chemical Processing Plant at the Idaho National Engineering Laboratory. Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    The Department of Energy (DOE) has prepared an environmental assessment (EA), DOE/EA-0831, for the construction and operation of the High-Level Waste Tank Farm Replacement (HLWTFR) Project for the Idaho Chemical Processing Plant located at the Idaho National Engineering Laboratory (INEL). The HLWTFR Project as originally proposed by the DOE and as analyzed in this EA included: (1) replacement of five high-level liquid waste storage tanks with four new tanks and (2) the upgrading of existing tank relief piping and high-level liquid waste transfer systems. As a result of the April 1992 decision to discontinue the reprocessing of spent nuclear fuel at INEL, DOE believes that it is unlikely that the tank replacement aspect of the project will be needed in the near term. Therefore, DOE is not proposing to proceed with the replacement of the tanks as described in this-EA. The DOE`s instant decision involves only the proposed upgrades aspect of the project described in this EA. The upgrades are needed to comply with Resource Conservation and Recovery Act, the Idaho Hazardous Waste Management Act requirements, and the Department`s obligations pursuant to the Federal Facilities Compliance Agreement and Consent Order among the Environmental Protection Agency, DOE, and the State of Idaho. The environmental impacts of the proposed upgrades are adequately covered and are bounded by the analysis in this EA. If DOE later proposes to proceed with the tank replacement aspect of the project as described in the EA or as modified, it will undertake appropriate further review pursuant to the National Environmental Policy Act.

  17. Learning by Knowledge Networking across Cultures - The Experience of Joint Courses in Environmental Studies for Malaysian and Danish Engineering and Science students

    DEFF Research Database (Denmark)

    Wangel, Arne; Stærdahl, Jens; Bransholm Pedersen, Kirsten

    2003-01-01

    ) and environmental impact assessment (EIA) in Malaysia 1998-2003 has sought to address these needs for new competences. Differences in educational background and work culture of the participants have presented difficulties during these courses, in particular in terms of achieving a mixed team building to turn some......Engineers and planners working in trans-national production and aid project interventions in Third World countries must be able to 're-invent' technological systems across cultures and plan and build capacities of their counterparts. A series of joint courses on cleaner production (CP...... of the obstacles into resources for knowledge sharing. However, students have stressed their positive experience of cross-cultural communication. While a joint course of three-week duration by itself may involve only limited cross-cultural learning, serving primarily as an introduction to a long-term field study...

  18. THE INFLUENCE OF THE INSTALLATION METHOD ON THE SELECTED PROPERTIES OF BIODEGRADABLE GEOTEXTILES USED IN ENVIRONMENTAL ENGINEERING

    Directory of Open Access Journals (Sweden)

    Joanna Beata Grzybowska-Pietras

    2017-06-01

    Full Text Available In the engineering constructions there are used biodegradable geotextiles, that are performing primarily a function of surface anti-erosion protection. Their biodegradability supports the development of vegetation, and protects the surface of the slope from the moment of installation in the ground. In order to achieve this functionality there are used mainly biononwovens and woven fabrics made of natiral fibers. In the paper there are presented results of studies on the effect of the instalation of the biononwoven (Maliwatt type with grass seeds applied in real conditions at a specified time (from November to June, on the selected physical, mechanical and hydraulic properties , and the development of vegetation (grasses. The experiment adopted two versions of instalation of nonwovens. In the first case geotextile was mounted directly on the ground, in the second additionally have been covered with a layer of native soil.

  19. Environmental feedbacks and engineered nanoparticles: mitigation of silver nanoparticle toxicity to Chlamydomonas reinhardtii by algal-produced organic compounds.

    Directory of Open Access Journals (Sweden)

    Louise M Stevenson

    Full Text Available The vast majority of nanotoxicity studies measures the effect of exposure to a toxicant on an organism and ignores the potentially important effects of the organism on the toxicant. We investigated the effect of citrate-coated silver nanoparticles (AgNPs on populations of the freshwater alga Chlamydomonas reinhardtii at different phases of batch culture growth and show that the AgNPs are most toxic to cultures in the early phases of growth. We offer strong evidence that reduced toxicity occurs because extracellular dissolved organic carbon (DOC compounds produced by the algal cells themselves mitigate the toxicity of AgNPs. We analyzed this feedback with a dynamic model incorporating algal growth, nanoparticle dissolution, bioaccumulation of silver, DOC production and DOC-mediated inactivation of nanoparticles and ionic silver. Our findings demonstrate how the feedback between aquatic organisms and their environment may impact the toxicity and ecological effects of engineered nanoparticles.

  20. THE HUMANIST FORMATION OF THE AGRONOMIST ENGINEER THROUGH THE ENVIRONMENTAL EDUCATION / LA FORMACIÓN HUMANISTA DEL INGENIERO AGRÓNOMO A TRAVÉS DE LA EDUCACIÓN AMBIENTAL

    Directory of Open Access Journals (Sweden)

    Adelaida Almaguer Álvarez

    2010-10-01

    Full Text Available To guide the formation of the agronomist professionals towards and for the environment, as a complex and multidimensional objective means to system and integrate contents of the natural, techniques and social sciences; this will allow, with a holistic thought, to deal with the environmental problematic, from a point of view that goes beyond the ecological and technological processes and integrates social and cultural processes. The creation of a humanist behavior and the acquisition of ethic convictions in an agronomist engineer require for the establishment of strategies, models and a good environmental practice that, from their own process of formation, will contribute to the integration to the sociocultural and humanist dimensions in the Environmental Education. In this sense the investigation offers a strategy for the humanist formation of the agronomist engineer; which is supported by the integration of the Environmental Education to the process of general formation of this professional, thorough the components and dimensions of such a process.

  1. Engineering Students' Sustainability Approaches

    Science.gov (United States)

    Haase, S.

    2014-01-01

    Sustainability issues are increasingly important in engineering work all over the world. This article explores systematic differences in self-assessed competencies, interests, importance, engagement and practices of newly enrolled engineering students in Denmark in relation to environmental and non-environmental sustainability issues. The…

  2. Laboratory Evaluation of In Situ Chemical Oxidation for Groundwater Remediation, Test Area North, Operable Unit 1-07B, Idaho National Engineering and Environmental Laboratory, Volume Three - Appendix F

    Energy Technology Data Exchange (ETDEWEB)

    Cline, S.R.; Denton, D.L.; Giaquinto, J.M.; McCracken, M.K.; Starr, R.C.

    1999-04-01

    This appendix supports the results and discussion of the laboratory work performed to evaluate the feasibility of in situ chemical oxidation for Idaho National Environmental and Engineering Laboratory's (INEEL) Test Area North (TAN) which is contained in ORNL/TM-13711/V1. This volume contains Appendix F. Appendix F is essentially a photocopy of the ORNL researchers' laboratory notebooks from the Environmental Sciences Division (ESD) and the Radioactive Materials Analytical Laboratory (RMAL).

  3. Environmental and other evaluations of alternatives for management of defense transuranic waste at the Idaho National Engineering Laboratory. Volume 1 of 2

    International Nuclear Information System (INIS)

    1982-04-01

    The US Department of Energy (DOE) is responsible for developing and implementing methods for the safe and environmentally acceptable disposal of radioactive wastes. In connection with this responsibility, the DOE is formulating a program for the long-term management of transuranic (TRU) waste buried and stored at the Idaho National Engineering Laboratory (INEL). This report has been prepared to document the results of environmental and other evaluations for three decisions that the DOE is considering: (1) the selection of a general method for the long-term management of the buried TRU waste; (2) the selection of a method for processing the stored waste and for processing the buried waste, if it is retrieved; (3) the selection of a location for the waste-processing facility. This document pertains only to the contact-handled TRU waste buried in pits and trenches and the contact-handled TRU waste held in aboveground storage at the INEL. A decision has previously been made on a method for the long-term management of the stored waste; it will be retrieved and shipped to the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. The WIPP is also used in this report as a reference repository for evaluation purposes for the buried waste. This report is contained in two volumes. Volume I is arranged as follows: the summary is an overview of the analyses contained in this document. Section 1 is a statement of the underlying purpose and need to which the report is responding. Section 2 describes the alterntives. Section 3 describes the affected environment at the INEL and the WIPP sites. Section 4 analyzes the environmental effects of each alternative. The appendices in Volume II contain data and discussions supporting the material presented in Volume I

  4. Solid waste management of coal conversion residuals from a commercial-size facility: environmental engineering aspects. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bern, J.; Neufeld, R. D.; Shapiro, M. A.

    1980-11-30

    Major residuals generated by the conversion process and its auxiliary operations include: (a) coal preparation wastes; (b) gasifier ash; (c) liquefaction solids-char; (d) tail gas or flue gas desulfurization sludge; (e) boiler flyash and bottom ash; (f) raw water treatment sludge, and; (g) biosludges from process wastewater treatment. Recovered sulfur may also require disposal management. Potential environmental and health impacts from each of the residues are described on the basis of characterization of the waste in the perspective of water quality degradation. Coal gasification and liquefaction systems are described in great detail with respect to their associated residuals. Management options are listed with the conclusion that land disposal of the major residual streams is the only viable choice. On-site versus off-site disposal is analyzed with the selection of on-site operations to reduce political, social and institutional pressures, and to optimize the costs of the system. Mechanisms for prevention of leachate generation are described, and various disposal site designs are outlined. It is concluded that co-disposal feasibility of some waste streams must be established in order to make the most preferred solid waste management system feasible. Capacity requirements for the disposal operation were calculated for a 50,000 bbl/day coal liquefaction plant or 250 million SCF/day gasification operation.

  5. Environmental characterisation of sewage sludge/paper ash-based composites in relation to their possible use in civil engineering.

    Science.gov (United States)

    Mladenovič, Ana; Hamler, Sandra; Zupančič, Nina

    2017-01-01

    The environmental acceptability of geotechnical composites made of treated municipal sewage sludge (SwS) and paper ash (PA) after two different curing periods has been investigated. The mineral composition of such composites, including their content of major oxides, is mainly influenced by the PA. The content of potentially toxic elements (PTEs) in the initial materials and in the composites varies considerably. In the SwS the Ba, Cd, Cr, Cu, Hg, Ni and Zn contents are above the legally permitted limits. The PTE content of PA are lower, but still somewhat above the permitted values for Ba and Cu. Mixing these two materials together resulted in a decrease in the PTE, but the Ba, Cu and Zn contents are still too high for agricultural application. However, leachates from composites that had been cured for 28 days are highly alkaline, and the As, Ba, Cd, Cr, Hg, Mo, Ni, Pb and Zn contents in them are well below the permitted values. The Cu contents (2.4 to 5.4 mg/kg) are above the permitted limit for inert material, but inside the range for non-hazardous material. In a leachate of composite which was prepared with fresh PA and a lower PA to SwS ratio, the Cu content was 1.4 mg/kg, since fresh PA is more reactive and therefore has a higher ability to immobilise Cu. Therefore, such mixtures can be utilised for covers and liners for sanitary landfills.

  6. Schnabel Engineering Lecture

    OpenAIRE

    Cording, Edward

    2014-01-01

    Schnabel Engineering is pleased to bring you Dr. Edward J. Cording as our eighth lecturer of this series. Dr. Cording is Professor Emeritus of Civil and Environmental Engineering at the University of Illinois at Urbana-Champaign where he has taught and performed research in geotechnical engineering, focusing on rock mechanics, soil-structure interaction, and underground construction. The field has been his laboratory, on engineering projects; beginning in the 1960's with large deep caverns ...

  7. Hydrologic and Meteorological Data for an Unsaturated-Zone Study Area near the Radioactive Waste Management Complex, Idaho National Engineering and Environmental Laboratory, Idaho, 1990-96

    International Nuclear Information System (INIS)

    Perkins, K. S.; Nimmo, J. R.; Pittman, J. R.

    1998-01-01

    Trenches and pits at the Radioactive Waste Management Complex (RWMC) Subsurface Disposal Area (SDA) at the Idaho National Engineering and Environmental Laboratory (formerly known as the Idaho National Engineering Laboratory) have been used for burial of radioactive waste since 1952. In 1985, the U.S. Geological Survey (USGS), in cooperation with the U.S. Department of Energy, began a multi-phase study of the geohydrology of the RWMC to provide a basis for estimating the extent of and the potential for migration of radionuclides in the unsaturated zone beneath the waste trenches and pits. This phase of the study provides hydrologic and meteorological data collected at a designated test trench area adjacent to the northern boundary of the RWMC SDA from 1990 through 1996. The test trench area was constructed by the USGS in 1985. Hydrologic data presented in this report were collected during 1990-96 in the USGS test trench area. Soil-moisture content measurement from disturbed and undisturbed soil were collected approximately monthly during 1990-96 from 11 neutron-probe access holes with a neutron moisture gage. In 1994, three additional neutron access holes were completed for monitoring. A meteorological station inside the test trench area provided data for determination of evapotranspiration rates. The soil-moisture and meteorological data are contained in files on 3-1/2 inch diskettes (disks 1 and 2) included with this report. The data are presented in simple American Standard Code for Information Interchange (ASCII) format with tab-delimited fields. The files occupy a total of 1.5 megabytes of disk space

  8. 40 CFR 91.115 - Certification procedure-determining engine power and engine families.

    Science.gov (United States)

    2010-07-01

    ... engine power and engine families. 91.115 Section 91.115 Protection of Environment ENVIRONMENTAL... engine power and engine families. (a) Engine power must be calculated using SAE J1228. This procedure has... engine families as specified by paragraph (c) of this section, comprised of engines expected to have...

  9. Geotechnical studies for evaluation and limitations of environmental and engineering hazards that affect the economic infrastructure in Abha, Saudi Arabia

    Science.gov (United States)

    Shaaban, Fathy; Al-Salami, Ali E.

    2014-12-01

    Abha is the capital of Asir province in Saudi Arabia. It is situated 2200 meters (7200 ft) above the sea level in the fertile mountains of the south-western Saudi Arabia. One of the most important structures of this region is Abha dam that acts as a barrier that impounds water or underground streams thereby retaining the ground water of the region. With the passage of time, various environmental factors such as ground movement, wind and changes in temperature may have significant effect on these various structure factors and may lead to invisible cracks and other structural defects. Because the dams and tunnels are prone to sudden collapse, there is potential great risk to lives of the people and significant economic loss in this area. The use of the ground penetrating radar (GPR) and electric resistivity techniques is a non-invasive scan and could assess the conditions of various built structures as well as the earth beneath or surrounding it. So the GPR system with appropriate types of antennas (1.5 GH, 1 GH, 400 MH and 100 MH) and electrical resistivity in one dimension (VES) and two dimensions (electrical profiling and imaging) is used in this work. This work aims to investigate the dam structure, developing cracks or areas of increased moisture. Also to study the surrounding areas to detect seepage from pond that may affect nearby buildings and the dam itself. It reveals that, the depth of water bearing layer ranges from 2 m to 10 m, where the three geoelectric layers are present. The first layer has resistivity values ranging from 44 Ω m-1200 Ω m with thickness ranging from 3 m to 18 m that is interpreted as the wadi deposits. The second layer having resistivity values from 11 Ω m to 137 Ω m is interpreted as the water saturated in the fractured basements. The third layer of resistivity values ranging from 2200 Ω m to 90,000 Ω m is interpreted as dry, massive basements. The GPR results provided internal images of the slab, showing its morphology, areas

  10. Investigation on the emission quality, performance and combustion characteristics of the compression ignition engine fueled with environmental friendly corn oil methyl ester - Diesel blends.

    Science.gov (United States)

    Nagaraja, S; Soorya Prakash, K; Sudhakaran, R; Sathish Kumar, M

    2016-12-01

    This paper deals with emission quality of diesel engine based on eco toxicological studies with different methods of environmental standard toxicity tests satisfy the Bharath and European emission norms. Based on the emission norms, Corn Oil Methyl Ester (COME) with diesel is tested in a compression ignition engine and the performance and combustion characteristics are discussed. The corn oil was esterified and the property of corn oil methyl ester was within the limits specified in ASTM D 6751-03. The COME was blended together with diesel in different proportion percentages along with B20, B40, B60, B80, and B100. The emission and performance tests for various blends of COME was carried out using single cylinder, four stroke diesel engine, and compared with the performance obtained with 100% diesel (D100). The results give clear information that COME has low exhaust emissions and increase in performance compared to D100 without any modifications. It gives better performance, which is nearer to the obtained results of D100. Specific Fuel Consumption (SFC) of B100 at the full load condition is found to be 4% lower than that of (D100). The maximum Brake Thermal Efficiency (BTE) of B100 is found to be 8.5% higher than that of the D100 at full load. Also, the maximum BTE of part load for different blends is varied from 5.9% to 7.45% which is higher than D100. The exhaust gas emissions like Carbon Monoxide (CO), Carbon Dioxide (CO 2 ), Hydro Carbon (HC) and Nitrogen Oxide (NO x ) are found to be 2.3 to 18.8% lower compared to D100 for part as well as full load. The heat release rate of biodiesel and it blends are found to 16% to 35% lower as compared to D100 for part load, where as for full load it is 21% lower than D100. The results showed that the test of emissions norms are well within the limits of Bharath VI and European VI and it leads to less pollution, less effect on green eco system and potential substitute to fossil fuels. Copyright © 2016 Elsevier Inc. All

  11. Chemical and Radiochemical Constituents in Water from Wells in the Vicinity of the Naval Reactors Facility, Idaho National Engineering and Environmental Laboratory, Idaho, 1997-98

    Energy Technology Data Exchange (ETDEWEB)

    R. C. Bartholomay; L. L. Knobel; B. J. Tucker; B. V. Twining (USGS)

    2000-06-01

    The US Geological Survey, in response to a request from the U.S Department of Energy's Pittsburgh Naval Reactors Office, Idaho Branch Office, sampled water from 13 wells during 1997-98 as part of a long-term project to monitor water quality of the Snake River Plain aquifer in the vicinity of the Naval Reactors Facility, Idaho National Engineering and Environmental Laboratory, Idaho. Water samples were analyzed for naturally occurring constituents and man-made contaminants. A total of 91 samples were collected from the 13 monitoring wells. The routine samples contained detectable concentrations of total cations and dissolved anions, and nitrite plus nitrate as nitrogen. Most of the samples also had detectable concentrations of gross alpha- and gross beta-particle radioactivity and tritium. Fourteen quality-assurance samples were also collected and analyzed; seven were field-blank samples, and seven were replicate samples. Most of the field blank samples contained less than detectable concentrations of target constituents; however some blank samples did contain detectable concentrations of calcium, magnesium, barium, copper, manganese, nickel, zinc, nitrite plus nitrate, total organic halogens, tritium, and selected volatile organic compounds.

  12. Heavy element radionuclides (Pu, Np, U) and 137Cs in soils collected from the Idaho National Engineering and Environmental Laboratory and other sites in Idaho, Montana, and Wyoming

    International Nuclear Information System (INIS)

    Beasley, T.M.; Rivera, W. Jr.; Liszewski, M.J.; Orlandini, K.A.

    1998-10-01

    The isotopic composition of Pu in soils on and near the Idaho National Engineering and Environmental Laboratory (INEEL) has been determined in order to apportion the sources of the Pu into those derived from stratospheric fallout, regional fallout from the Nevada Test Site (NTS), and facilities on the INEEL site. Soils collected offsite in Idaho, Montana, and Wyoming were collected to further characterize NTS fallout in the region. In addition, measurements of 237 Np and 137 Cs were used to further identify the source of the Pu from airborne emissions at the Idaho Chemical Processing Plant (ICPP) or fugitive releases from the Subsurface Disposal Area (SDA) in the Radioactive Waste Management Complex (RWMC). There is convincing evidence from this study that 241 Am, in excess of that expected from weapons-grade Pu, constituted a part of the buried waste at the SDA that has subsequently been released to the environment. Measurements of 236 U in waters from the Snake River Plain aquifer and a soil core near the ICPP suggest that this radionuclide may be a unique interrogator of airborne releases from the ICPP. Neptunium-237 and 238 Pu activities in INEEL soils suggest that airborne releases of Pu from the ICPP, over its operating history, may have recently been overestimated

  13. Engineering controls in veterinary oncology: A survey of 148 ACVIM board-certified oncologists and environmental surveillance in 20 specialty hospitals.

    Science.gov (United States)

    Alexander, K; Northrup, N; Clarke, D; Lindell, H; Laver, T

    2018-02-15

    Engineering controls (EC, facility and equipment barriers between hazards and people) are used to avoid exposure to chemotherapy drugs. In this study, American College of Veterinary Internal Medicine board-certified veterinary oncologists were surveyed about their use of containment primary EC (C-PEC) and supplemental EC (closed system transfer devices, CSTD). The survey was completed by 148 (38%) of practicing diplomates. All used EC. Both C-PEC and CSTD were used at 92% of hospitals; however, US Pharmacopoeial Convention Chapter (USP ) standards were met at only 19% of hospitals and oncologists did not know the type of C-PEC at 18% of hospitals. Next, surface contamination and EC use were assessed with environmental surveillance for carboplatin, cyclophosphamide, doxorubicin, and vincristine in 20 veterinary specialty hospitals using a commercially available kit. No contamination with carboplatin, doxorubicin, or vincristine was detected, however, there was contamination with cyclophosphamide at 4 hospitals. Based on this study, most veterinary oncologists use C-PEC and CSTD, but few meet USP standards. Current measures appear effective for preventing contamination with IV drugs, but additional measures are needed for oral drugs. © 2018 John Wiley & Sons Ltd.

  14. Chemical and radiochemical constituents in water from wells in the vicinity of the naval reactors facility, Idaho National Engineering and Environmental Laboratory, Idaho, 1997-98

    Science.gov (United States)

    Bartholomay, Roy C.; Knobel, LeRoy L.; Tucker, Betty J.; Twining, Brian V.

    2000-01-01

    The U.S. Geological Survey, in response to a request from the U.S. Department of Energy?s Phtsburgh Naval Reactors Ofilce, Idaho Branch Office, sampled water from 13 wells during 1997?98 as part of a long-term project to monitor water quality of the Snake River Plain aquifer in the vicinity of the Naval Reactors Facility, Idaho National Engineering and Environmental Laboratory, Idaho. Water samples were analyzed for naturally occurring constituents and man-made contaminants. A totalof91 samples were collected from the 13 monitoring wells. The routine samples contained detectable concentrations of total cations and dissolved anions, and nitrite plus nitrate as nitrogen. Most of the samples also had detectable concentrations of gross alpha- and gross beta-particle radioactivity and tritium. Fourteen qualityassurance samples also were collected and analyze~ seven were field-blank samples, and seven were replicate samples. Most of the field blank samples contained less than detectable concentrations of target constituents; however, some blank samples did contain detectable concentrations of calcium, magnesium, barium, copper, manganese, nickel, zinc, nitrite plus nitrate, total organic halogens, tritium, and selected volatile organic compounds.

  15. Priorities for a 21st-century defense: aligning u.s. Army environmental science and engineering officer resources with the department of defense strategic guidance.

    Science.gov (United States)

    Licina, Derek; Rufolo, Dennis; Story, Mike

    2013-01-01

    The recently published Department of Defense (DoD) strategic guidance highlights the need to ?shape a joint force for the future.? Supporting requirements to shape the joint force while the overall DoD force structure is reduced will be challenging. Fortunately, based on its unique training and experience, the Army Environmental Science and Engineering Officer (ESEO) profession is positioned today to fill anticipated joint public health requirements. Obtaining the U.S. Army Medical Department (AMEDD) approval to meet these requirements will have near-term consequences for the ESEO profession as some existing (albeit antiquated) authorizations may go unfilled. However, long-term dividends for the Medical Service Corps (MSC), AMEDD, Army, and DoD will be achieved by realigning critical resources to future joint and interagency requirements. Assigning ESEOs now to organizations such as the Theater Special Operations Commands (TSOCs), U.S. Agency for International Development (USAID), and the North Atlantic Treaty Organization (NATO) with perceived and real joint force health protection/public health requirements through unique means will ensure our profession remains relevant today and supports the joint force of tomorrow. 2013.

  16. Assessment of environmental and engineering geological problems for the possible re-use of an abandoned rock-hewn settlement in Urgüp (Cappadocia), Turkey

    Science.gov (United States)

    Ulusay, Resat; Gokceoglu, Candan; Topal, Tamer; Sonmez, Harun; Tuncay, Ergün; Erguler, Zeynal Abiddin; Kasmer, Ozgu

    2006-07-01

    The Cappadocia Region of Central Anatolia having a very distinct culture is one of the attractive touristic sites of Turkey due to its spectacular and unique landforms and historical heritages. In this region, the structures carved into thick to massive tuffs survived and kept their original integrity for a number of centuries. Environmental and anthropological factors at the Cappadocia Region have been the main reasons for extensive subsurface and multi-purpose use in the past and present. In addition, thermal insulation properties of the tuffs make these rocks suitable for use in underground openings. The Kayakapi Neighborhood, located in the town of Urgüp, is one of the famous historical sites. This site is situated within the “Göreme National Park and the Rock Sites of Cappadocia” which was inscribed on the World Heritage List in 1985. In order to develop the tourism potential of this abandoned site while preserving its cultural and natural values, a natural environmental conservation and revitalization project was initiated. As an integral part of this project, in this study, environmental and engineering geological problems, including rock fall potential and stability of about 1,200 rock-hewn structures, were investigated and an inventory was prepared for the possible re-use of the underground openings and other structures at the site, and remedial measures were recommended. The assessments based on observations and experimental studies indicated that the tuffs do not show significant changes both perpendicular and parallel to layering, and discontinuities and rock weathering seem to be more important factors controlling the stability of rock-hewn structures. The major stability problems threatening the re-use of the openings are structurally-controlled block instabilities, overbreaks, and erosion and shearing of the pillars made of tuff. On the other hand, the area at the entrance of the site requires some protection measures such as the construction

  17. Environmental risk assessment of engineered nano-SiO2 , nano iron oxides, nano-CeO2 , nano-Al2 O3 , and quantum dots.

    Science.gov (United States)

    Wang, Yan; Nowack, Bernd

    2018-01-09

    Many research studies have endeavored to investigate the ecotoxicological hazards of engineered nanomaterials (ENMs). However, little is known regarding the actual environmental risks of ENMs, combining both hazard and exposure data. The aim of the present study was to quantify the environmental risks for nano-Al 2 O 3 , nano-SiO 2 , nano iron oxides, nano-CeO 2 , and quantum dots by comparing the predicted environmental concentrations (PECs) with the predicted-no-effect concentrations (PNECs). The PEC values of these 5 ENMs in freshwaters in 2020 for northern Europe and southeastern Europe were taken from a published dynamic probabilistic material flow analysis model. The PNEC values were calculated using probabilistic species sensitivity distribution (SSD). The order of the PNEC values was quantum dots nano-CeO 2  nano iron oxides nano-Al 2 O 3  nano-SiO 2 . The risks posed by these 5 ENMs were demonstrated to be in the reverse order: nano-Al 2 O 3  > nano-SiO 2  > nano iron oxides > nano-CeO 2  > quantum dots. However, all risk characterization values are 4 to 8 orders of magnitude lower than 1, and no risk was therefore predicted for any of the investigated ENMs at the estimated release level in 2020. Compared to static models, the dynamic material flow model allowed us to use PEC values based on a more complex parameterization, considering a dynamic input over time and time-dependent release of ENMs. The probabilistic SSD approach makes it possible to include all available data to estimate hazards of ENMs by considering the whole range of variability between studies and material types. The risk-assessment approach is therefore able to handle the uncertainty and variability associated with the collected data. The results of the present study provide a scientific foundation for risk-based regulatory decisions of the investigated ENMs. Environ Toxicol Chem 2018;9999:1-9. © 2018 SETAC. © 2018 SETAC.

  18. ENVIRONMENTAL TECHNOLOGY VERIFICATION: TEST/QA PLAN FOR THE VERIFICATION TESTING OF SELECTIVE CATALYTIC REDUCTION CONTROL TECHNOLOGIES FOR HIGHWAY, NONROAD, AND STATIONARY USE DIESEL ENGINES

    Science.gov (United States)

    The U.S. Environmental Protection Agency established the Environmental Technology Verification Program to accelerate the development and commercialization of improved environmental technology through third party verification and reporting of product performance. Research Triangl...

  19. Biocommodity Engineering.

    Science.gov (United States)

    Lynd; Wyman; Gerngross

    1999-10-01

    The application of biotechnology to the production of commodity products (fuels, chemicals, and materials) offering benefits in terms of sustainable resource supply and environmental quality is an emergent area of intellectual endeavor and industrial practice with great promise. Such "biocommodity engineering" is distinct from biotechnology motivated by health care at multiple levels, including economic driving forces, the importance of feedstocks and cost-motivated process engineering, and the scale of application. Plant biomass represents both the dominant foreseeable source of feedstocks for biotechnological processes as well as the only foreseeable sustainable source of organic fuels, chemicals, and materials. A variety of forms of biomass, notably many cellulosic feedstocks, are potentially available at a large scale and are cost-competitive with low-cost petroleum whether considered on a mass or energy basis, and in terms of price defined on a purchase or net basis for both current and projected mature technology, and on a transfer basis for mature technology. Thus the central, and we believe surmountable, impediment to more widespread application of biocommodity engineering is the general absence of low-cost processing technology. Technological and research challenges associated with converting plant biomass into commodity products are considered relative to overcoming the recalcitrance of cellulosic biomass (converting cellulosic biomass into reactive intermediates) and product diversification (converting reactive intermediates into useful products). Advances are needed in pretreatment technology to make cellulosic materials accessible to enzymatic hydrolysis, with increased attention to the fundamental chemistry operative in pretreatment processes likely to accelerate progress. Important biotechnological challenges related to the utilization of cellulosic biomass include developing cellulase enzymes and microorganisms to produce them, fermentation of

  20. Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs. Final Environmental Impact Statement: Volume 1, Appendix L, Environmental Justice

    International Nuclear Information System (INIS)

    1995-04-01

    Appendix L provides an assessment of the areas surrounding the 10 sites under consideration for the management of spent nuclear fuels (SNF) under all programmatic alternatives considered in this volume. It is divided into two sections: (a) the five sites considered for the management of DOE naval SNF only (under the No Action and Decentralization alternatives, and (b) the five DOE sites being considered for the management of all types of DOE SNF under all alternatives. The five sites considered for the management of naval SNF only are the Norfolk Naval Shipyard, Portsmouth, Virginia; Portsmouth Naval Shipyard, Kittery, Maine; Pearl Harbor Naval Shipyard, Honolulu, Hawaii; Puget Sound Naval Shipyard, Bremerton, Washington; and Kesselring Site, West Milton, New York. The five DOE sites considered for the management of some portion or all DOE SNF are the Savannah River Site, Aiken, South Carolina; Oak Ridge Reservation, Oak Ridge, Tennessee; Idaho National Engineering Laboratory, Idaho Falls, Idaho; Hanford Site, Richland, Washington; and Nevada Test Site, Mercury, Nevada. This assessment includes potential adverse impacts resulting from both onsite activities and associated transportation of materials. Based on this assessment, it is concluded that none of the alternatives analyzed results in disproportionately high and adverse effects on minority populations or low-income communities surrounding any of the sites under consideration for the management of SNF or associated offsite transportation routes

  1. Green Engineering Textbook and Training Modules

    Science.gov (United States)

    EPA's Green Engineering textbook, Green Engineering: Environmentally Conscious Design of Chemical Processes, is a college senior-to-graduate-level engineering textbook. The primary authors are Dr. David Allen and Dr. David Shonnard.

  2. Environmental guidelines for reuse of ash in civil engineering applications - including criteria for Sb and As; Miljoeriktlinjer foer askanvaendning i anlaeggningsbyggande - inklusive haltkriterier foer Sb och As

    Energy Technology Data Exchange (ETDEWEB)

    Bendz, David; Wik, Ola (Swedish Geotechnical Inst., Linkoeping (Sweden)); Jones, Celia; Pettersson, Michael; Elert, Mark (Kemakta, Stockholm (Sweden))

    2009-07-15

    Swedish producers, authorities and users have acknowledged the need for common environmental guidelines for residues. The objective of this project has been to develop a proposal for common environmental guidelines for reuse of ash in civil engineering applications. The project has a narrow risk assessment with application on an strictly nearfield, local perspective and focus on a limited set of substances. Health aspects for construction workers are not covered in the project. The starting point in the risk assessment is the assumption that ashes may be used just like any conventional construction material. Special requirements or regulations regarding precautionary actions in the handling of ashes, regarding the site or surroundings will be avoided. The guiding principle has been the precautionary principle: reuse of ash is acceptable only if it constitute an insignificant risk to health and environment. The calculations are based on defined emission- and exposure scenarios. The concept of insignificant risk imply that the impact in the defined points of compliance does not exceed established health- and environmental criteria. The model address health risks associated with spreading of particles and exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berries and consumption of ground water. Off-site environmental effects in surface waters and in soil as well as health- and environmental risks in the post use phase are also considered. Exposure by dust is addressed in the same way as in the Swedish Environmental Protection Agency's guidelines for contaminated soil [12]. The guidelines values for exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berrys are total content, whereas the guidelines for exposure by consumption of ground water or environmental effects in surface waters are based on leaching properties of the ash. The guidelines rely on a conceptual model, defined emissions and

  3. Environmental contaminants: assessment and control

    National Research Council Canada - National Science Library

    Vallero, Daniel A

    2004-01-01

    ... Understanding Policy by Understanding Science Connections and Interrelationships of Environmental Science Environmental Assessment and Intervention Engineering Technical Note: Cleaning up a Hazardous Waste Site Social Aspects of Environmental Science Introduction to Environmental Policy The National Environmental Policy Act Issues in Environmental Science: Co...

  4. In-Situ Grouting Treatability Study for the Idaho National Engineering and Environmental Laboratory Subsurface Disposal Area-Transuranic Pits and Trenches

    Energy Technology Data Exchange (ETDEWEB)

    Loomis, G. G.; Jessmore, J. J.; Sehn, A. L.; Miller, C. M.

    2002-02-27

    At the Idaho National Engineering and Environmental Laboratory (INEEL), a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) treatability study is being performed to examine the technology of in situ grouting for final in situ disposal of buried mixed transuranic (TRU) waste. At the INEEL, there is over 56,000 cubic meters of waste commingled with a similar amount of soil in a shallow (3-5 m) land burial referred to as Waste Area Group 7-13/14. Since this buried waste has been declared on the National Priorities List under CERCLA, it is being managed as a superfund site. Under CERCLA, options for this waste include capping and continued monitoring, retrieval and ex situ management of the retrieved waste, in situ stabilization by vitrification or grouting, in situ thermal dissorption, or some combination of these options. In situ grouting involves injecting grout at high pressures (400 bars) directly into the waste to create a solid monolith. The in situ grouting process is expected to both stabilize the waste against subsidence and provide containment against migration of waste to the Snake River Plain Aquifer lying 150-200 m below the waste. The treatability study involves bench testing, implementability testing, and field testing. The bench testing was designed to pick three grouts from six candidate grouts for the implementability field testing in full scale which were designed to down-select from those three grouts to one grout for use in a full-scale field demonstration of the technology in a simulated test pit. During the bench testing, grouts were evaluated for durability using American Nuclear Society 16.1 Leach Protocol as well as evaluating the effect on physical parameters such as hydraulic conductivity and compressive strength due to the presence of interferences such as soil, organic sludge, and nitrate salts. During full-scale implementability testing, three grouts were evaluated for groutability and monolith formation

  5. Engineering Encounters: Engineering Adaptations

    Science.gov (United States)

    Gatling, Anne; Vaughn, Meredith Houle

    2015-01-01

    Engineering is not a subject that has historically been taught in elementary schools, but with the emphasis on engineering in the "Next Generation Science Standards," curricula are being developed to explicitly teach engineering content and design. However, many of the scientific investigations already conducted with students have…

  6. Geologic Controls of Hydraulic Conductivity in the Snake River Plain Aquifer At and Near the Idaho National Engineering and Environmental Laboratory, Idaho

    Energy Technology Data Exchange (ETDEWEB)

    S. R. Anderson; M. A. Kuntz; L. C. Davis

    1999-02-01

    The effective hydraulic conductivity of basalt and interbedded sediment that compose the Snake River Plain aquifer at and near the Idaho National Engineering and Environmental Laboratory (INEEL) ranges from about 1.0x10 -2 to 3.2x10 4 feet per day (ft/d). This six-order-of-magnitude range of hydraulic conductivity was estimated from single-well aquifer tests in 114 wells, and is attributed mainly to the physical characteristics and distribution of basalt flows and dikes. Hydraulic conductivity is greatest in thin pahoehoe flows and near-vent volcanic deposits. Hydraulic conductivity is least in flows and deposits cut by dikes. Estimates of hydraulic conductivity at and near the INEEL are similar to those measured in similar volcanic settings in Hawaii. The largest variety of rock types and the greatest range of hydraulic conductivity are in volcanic rift zones, which are characterized by numerous aligned volcanic vents and fissures related to underlying dikes. Three broad categories of hydraulic conductivity corresponding to six general types of geologic controls can be inferred from the distribution of wells and vent corridors. Hydraulic conductivity of basalt flows probably is increased by localized fissures and coarse mixtures of interbedded sediment, scoria, and basalt rubble. Hydraulic conductivity of basalt flows is decreased locally by abundant alteration minerals of probable hydrothermal origin. Hydraulic conductivity varies as much as six orders of magnitude in a single vent corridor and varies from three to five orders of magnitude within distances of 500 to 1,000 feet. Abrupt changes in hydraulic conductivity over short distances suggest the presence of preferential pathways and local barriers that may greatly affect the movement of ground water and the dispersion of radioactive and chemical wastes downgradient from points of waste disposal.

  7. Activation of Pulmonary Dendritic Cells and Th2-Type Inflammatory Responses on Instillation of Engineered, Environmental Diesel Emission Source or Ambient Air Pollutant Particles in vivo

    Science.gov (United States)

    Bezemer, Gillina F.G.; Bauer, Stephen M.; Oberdörster, Günter; Breysse, Patrick N.; Pieters, Raymond H.H.; Georas, Steve N.; Williams, Marc A.

    2011-01-01

    The biological effects of acute particulate air pollution exposure in host innate immunity remain obscure and have relied largely on in vitro models. We hypothesized that single acute exposure to ambient or engineered particulate matter (PM) in the absence of other secondary stimuli would activate lung dendritic cells (DC) in vivo and provide information on the early immunological events of PM exposure and DC activation in a mouse model naïve to prior PM exposure. Activation of purified lung DC was studied following oropharyngeal instillation of ambient particulate matter (APM). We compared the effects of APM exposure with that of diesel-enriched PM (DEP), carbon black particles (CBP) and silver nanoparticles (AgP). We found that PM species induced variable cellular infiltration in the lungs and only APM exposure induced eosinophilic infiltration. Both APM and DEP activated pulmonary DC and promoted a Th2-type cytokine response from naïve CD4+ T cells ex vivo. Cultures of primary peribronchial lymph node cells from mice exposed to APM and DEP also displayed a Th2-type immune response ex vivo. We conclude that exposure of the lower airway to various PM species induces differential immunological responses and immunomodulation of DC subsets. Environmental APM and DEP activated DC in vivo and provoked a Th2 response ex vivo. By contrast, CBP and AgP induced altered lung tissue barrier integrity but failed to stimulate CD4+ T cells as effectively. Our work suggests that respirable pollutants activate the innate immune response with enhanced DC activation, pulmonary inflammation and Th2-immune responsiveness. PMID:21099199

  8. Engineering Forum Strategic Plan

    Science.gov (United States)

    This Strategic Plan highlights the purpose, mission, goals, and objectives of the U.S. Environmental Protection Agency (EPA) Engineering Forum (EF). It sets forth the principles that guide the EF's decision-making, helps clarify the EF's priorities, and...

  9. Improvements, Evaluation, and Application of 1D Vetem Inversion and Development and Application of 3D Vetem Inversion to Waste Pits at The Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Weng Cho Chew

    2004-10-27

    The project aim was the improvement, evaluation, and application of one dimensional (1D) inversion and development and application of three dimensional (3D) inversion to processing of data collected at waste pits at the Idaho National Engineering and Environmental Laboratory. The inversion methods were intended mainly for the Very Early Time Electromagnetic (VETEM) system which was designed to improve the state-of-the-art of electromagnetic imaging of the shallow (0 to about 5m) subsurface through electrically conductive soils.

  10. Chemical and physical properties affecting strontium distribution coefficients of surficial-sediment samples at the Idaho National Engineering and Environmental Laboratory, Idaho

    Science.gov (United States)

    Liszewski, M.J.; Rosentreter, J.J.; Miller, Karl E.; Bartholomay, R.C.

    2000-01-01

    The U.S. Geological Survey and Idaho State University, in cooperation with the U.S. Department of Energy, conducted a study to determine strontium distribution coefficients (K(d)s) of surficial sediments at the Idaho National Engineering and Environmental Laboratory (INEEL). Batch experiments using synthesized aqueous solutions were used to determine K(d)s, which describe the distribution of a solute between the solution and solid phase, of 20 surficial-sediment samples from the INEEL. The K(d)s for the 20 surficial-sediment samples ranged from 36 to 275 ml/g. Many properties of both the synthesized aqueous solutions and sediments used in the experiments also were determined. Solution properties determined were initial and equilibrium concentrations of calcium, magnesium, and strontium, pH and specific conductance, and initial concentrations of potassium and sodium. Sediment properties determined were grain-size distribution, bulk mineralogy, whole-rock major-oxide and strontium and barium concentrations, and Brunauer-Emmett-Teller (BET) surface area. Solution and sediment properties were correlated with strontium K(d)s of the 20 surficial sediments using Pearson correlation coefficients. Solution properties with the strongest correlations with strontium K(d)s were equilibrium pH and equilibrium calcium concentration correlation coefficients, 0.6598 and -0.6518, respectively. Sediment properties with the strongest correlations with strontium K(d)s were manganese oxide (MnO), BET surface area, and the >4.75-mm-grain-size fraction correlation coefficients, 0.7054, 0.7022, and -0.6660, respectively. Effects of solution properties on strontium K(d)s were interpreted as being due to competition among similarly charged and sized cations in solution for strontium-sorption sites; effects of sediment properties on strontium K(d)s were interpreted as being surface-area related. Multivariate analyses of these solution and sediment properties resulted in r2 values of 0

  11. Engineering Encounters: Reverse Engineering

    Science.gov (United States)

    McGowan, Veronica Cassone; Ventura, Marcia; Bell, Philip

    2017-01-01

    This column presents ideas and techniques to enhance your science teaching. This month's issue shares information on how students' everyday experiences can support science learning through engineering design. In this article, the authors outline a reverse-engineering model of instruction and describe one example of how it looked in our fifth-grade…

  12. Modern water resources engineering

    CERN Document Server

    Yang, Chih

    2014-01-01

    The Handbook of Environmental Engineering series is an incredible collection of methodologies that study the effects of pollution and waste in their three basic forms: gas, solid, and liquid. This exciting new addition to the series, Volume 15: Modern Water Resources Engineering , has been designed to serve as a water resources engineering reference book as well as a supplemental textbook. We hope and expect it will prove of equal high value to advanced undergraduate and graduate students, to designers of water resources systems, and to scientists and researchers. A critical volume in the Handbook of Environmental Engineering series, chapters employ methods of practical design and calculation illustrated by numerical examples, include pertinent cost data whenever possible, and explore in great detail the fundamental principles of the field. Volume 15: Modern Water Resources Engineering, provides information on some of the most innovative and ground-breaking advances in the field today from a panel of esteemed...

  13. Hydrologic Engineering Center River Analysis System (HEC-RAS) Water Temperature Models Developed for the Missouri River Recovery Management Plan and Environmental Impact Statement

    Science.gov (United States)

    2017-09-18

    ER D C/ EL T R- 17 -1 8 Missouri River Recovery Program (MRRP) Hydrologic Engineering Center-River Analysis System (HEC-RAS) Water...library at http://acwc.sdp.sirsi.net/client/default. Missouri River Recovery Program (MRRP) ERDC/EL TR-17-18 September 2017 Hydrologic ...Impact Statement” ERDC/EL TR-17-18 ii Abstract This report describes the Hydrologic Engineering Center-River Analysis System (HEC-RAS) water

  14. Environmental criteria to incorporate into civil engineering studies and projects to improve environmental impact assessment proceeding; Criterios ambientales a incorporar en proyectos de ingenieria civil para favorecer el procedimiento de Evaluacion de Impacto Ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Lazano Valero, I.; Palacios Garcia de la Rosa, D.; Doncel Moratilla, A.; Iglesias Perez, L.; Ortega Santos, L.; Varela Nieto, J. M.; Garcia Sanchez-Colomer, M.

    2009-07-01

    This study fulfils the need of establishing a guideline for environmental conditions that could be used to designing stages in projects submitted to Environmental Impact Assessment (EIA), in order to consider minimal requirements not only to encourage EIA proceedings but also to reduce Environmental Impact Statement (EIS) contents. EIS from the last 10 year for different civil works projects (roads, railways, airports, dams, hidroelectrical power stations, river channelizations, pipelines, water transfers, ports and works in the coast) have been studied, extracting all the environmental conditions found. Effectiveness and real implementation of theses conditions have been analysed in different phases of the project development, which have allowed a characterization of a series of environmental conditions that could improve environmental assessments and authorities decisions for EIS. (Author) 6 refs.

  15. Focal points 2010. Mobility with future - correct investment today. Environmental protection - investment restraint for agriculture? Engine for the climate policy: emission trading; Schwerpunkte 2010. Mobilitaet mit Zukunft - heute richtig investieren. Umweltschutz - Investitionshemmnis fuer die Landwirtschaft? Motor fuer die Klimapolitik: Der Emissionshandel

    Energy Technology Data Exchange (ETDEWEB)

    Ittershagen, Martin; Mavromati, Fotini (comps.)

    2010-04-14

    The publication of the German Federal environmental agency on the focal points 2010 covers the following topics: impetus for an ecological-economic policy; mobility with future -best investment for today: more environmentally compatible investments in traffic infrastructure, better technology - more efficiency, missing charging of environmental cost induces wrong stimuli; environmental protection - investment restraints for agriculture? Engine for climate policy: emission trading; the Federal environmental agency: bridge between science and politics, the Federal environmental agency for mankind and environment; data and facts; publications of the employees.

  16. Evaluation of environmental change and its effects on the radiological performance of a hypothetical shallow engineered disposal facility at Elstow, Bedfordshire

    International Nuclear Information System (INIS)

    1988-03-01

    The results of a project designed to evaluate aspects of a hypothetical facility for disposal of radioactive wastes at Elstow, Bedfordshire, are described. The project included modelling of environmental change using the TIME2 code, groundwater flow modelling, biosphere modelling and risk analysis using the SYVAC A/C code. The aims of the work were to demonstrate use of TIME2, investigate the evolution of the facility's environment and to evaluate the influence of environmental change on estimates of radiological risk. Risk analysis of several time-independent environmental system states, using data obtained from the other tasks, indicated that environmental changes significantly influence estimates of radiological risk. (author)

  17. Environmental Tectonics

    DEFF Research Database (Denmark)

    Foged, Isak Worre

    2016-01-01

    This chapter intends to clarify and argue for the approach to re- search taken within the PhD thesis ‘Environmental Tectonics’ by elaborating on an architectural research methodology that is based on the objective of the thesis as described in the associated abstra- ct. Environmental sustainable...... architecture, with its broad scope, can be understood differently from the perspective of natural and engineering sciences’ intense delimiting into quantitative isolated research inquiries and from the humanistic perspective of inclusi- ve qualitative inquiries. The research design approach is therefore broad...

  18. Environmental law

    International Nuclear Information System (INIS)

    Kloepfer, M.

    1989-01-01

    This comprehensive reference book on environmental law and practice also is a valuable textbook for students specializing in the field. The entire law on pollution control and environmental protection is presented in an intelligent system, covering the latest developments in the Federal and Land legislation, public environmental law, and the related provisions in the fields of civil law and criminal law. The national survey is rounded up by information concerning the international environmental law, environmental law of the European Communities, and of other foreign countries as e.g. Austria and Switzerland. The author also reviews conditions in neighbouring fields such as technology and labour law, environmental economy, environmental policy. Special attention is given to current topics, as e.g. relating to genetic engineering, disused landfills or industrial sites, soil protection, transport of hazardous goods, liability for damage to forests, atomic energy law, and radiation protection law. The latest publishing dates of literature and court decisions considered in the book are in the first months of 1989. (RST) [de

  19. 77 FR 66910 - Environmental Impact Statement, San Diego County, California

    Science.gov (United States)

    2012-11-07

    ... Transportation Engineer/Border Engineer, Federal Highway Administration--California Division, 401 B Street, Suite...[aacute]nchez, Senior Transportation Engineer/Border Engineer, Federal Highway Administration, San Diego... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Environmental Impact Statement, San...

  20. Layered Systems Engineering Engines

    Science.gov (United States)

    Breidenthal, Julian C.; Overman, Marvin J.

    2009-01-01

    A notation is described for depicting the relationships between multiple, contemporaneous systems engineering efforts undertaken within a multi-layer system-of-systems hierarchy. We combined the concepts of remoteness of activity from the end customer, depiction of activity on a timeline, and data flow to create a new kind of diagram which we call a "Layered Vee Diagram." This notation is an advance over previous notations because it is able to be simultaneously precise about activity, level of granularity, product exchanges, and timing; these advances provide systems engineering managers a significantly improved ability to express and understand the relationships between many systems engineering efforts. Using the new notation, we obtain a key insight into the relationship between project duration and the strategy selected for chaining the systems engineering effort between layers, as well as insights into the costs, opportunities, and risks associated with alternate chaining strategies.

  1. Example of International Co-Operation in the Frame of the Project Phare (TEMPUS) in Innovations in Teaching of Environmental Hydrogeology in Engineering Education in the Czech Republic.

    Science.gov (United States)

    Grmela, Arnost; Rapantova, Nadia

    The international TEMPUS (Trans-European Co-operating and Mobility Scheme for Higher Education between Central/Eastern Europe and European Union) project lasted from 1995-1997. In the framework of TEMPUS, a material and knowledge background was developed in order to ensure the education of the branch Geological Engineering with specialization in…

  2. Chlorine-36 in Water, Snow, and Mid-Latitude Glacial Ice of North America: Meteoric and Weapons-Tests Production in the Vicinity of the Idaho National Engineering and Environmental Laboratory, Idaho

    Energy Technology Data Exchange (ETDEWEB)

    L. DeWayne; J. R. Green (USGS); S. Vogt, P. Sharma (Purdue University); S. K. Frape (University of Waterloo); S. N. Davis (University of Arizona); G. L. Cottrell (USGS)

    1999-01-01

    Measurements of chlorine-36 (36Cl) were made for 64 water, snow, and glacial-ice and -runoff samples to determine the meteoric and weapons-tests-produced concentrations and fluxes of this radionuclide at mid-latitudes in North America. The results will facilitate the use of 36Cl as a hydrogeologic tracer at the Idaho National Engineering and Environmental Laboratory (INEEL). This information was used to estimate meteoric and weapons-tests contributions of this nuclide to environmental inventories at and near the INEEL. The data presented in this report suggest a meteoric source 36Cl for environmental samples collected in southeastern Idaho and western Wyoming if the concentration is less than 1 x 10 7 atoms/L. Additionally, concentrations in water, snow, or glacial ice between 1 x 10 7 and 1 x 10 8 atoms/L may be indicative of a weapons-tests component from peak 36Cl production in the late 1950s. Chlorine-36 concentrations between 1 x 10 8 and 1 x 10 9 atoms/L may be representative of re-suspension of weapons-tests fallout airborne disposal of 36Cl from the INTEC, or evapotranspiration. It was concluded from the water, snow, and glacial data presented here that concentrations of 36Cl measured in environmental samples at the INEEL larger than 1 x 10 9 atoms/L can be attributed to waste-disposal practices.

  3. Fluid mechanics of environmental interfaces

    CERN Document Server

    Gualtieri, Carlo

    2008-01-01

    Fluid Mechanics of Environmental Interfaces describes the concept of the environmental interface, defined as a surface between two either abiotic or biotic systems. These are in relative motion and exchange mass, heat and momentum through biophysical and/or chemical processes. These processes are fluctuating temporally and spatially.The book will be of interest to graduate students, PhD students as well as researchers in environmental sciences, civil engineering and environmental engineering, (geo)physics and applied mathematics.

  4. Environmental chemistry: Volume A

    Energy Technology Data Exchange (ETDEWEB)

    Yen, T.F.

    1999-08-01

    This is an extensive introduction to environmental chemistry for engineering and chemical professionals. The contents of Volume A include a brief review of basic chemistry prior to coverage of litho, atmo, hydro, pedo, and biospheres.

  5. 40 CFR 1048.330 - May I sell engines from an engine family with a suspended certificate of conformity?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false May I sell engines from an engine... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Testing Production-line Engines § 1048.330 May I sell engines from an engine...

  6. Environmental compliance management system

    Energy Technology Data Exchange (ETDEWEB)

    Cason, A. [Dow Chemical Co., Midland, MI (United States); Larrinaga, L.

    1995-12-01

    A cross-functional team of environmental regulatory experts, plant managers, and plant engineers have been working since 1991 on the development, implementation and maintenance of the Environmental Compliance Management System. The Environmental Compliance Management System is a practical and accurate method of determining the applicability of the state and federal environmental regulations and of establishing standard and straightforward procedures to meet these requirements. The Environmental Compliance Management System allows individual manufacturing facilities to avoid the additional manpower that would be required to read, digest and decide on the applicability and plan of action to meet the requirements of all the environmental regulations.

  7. Environmental Impact Assessment: A Procedure.

    Science.gov (United States)

    Stover, Lloyd V.

    Prepared by a firm of consulting engineers, this booklet outlines the procedural "whys and hows" of assessing environmental impact, particularly for the construction industry. Section I explores the need for environmental assessment and evaluation to determine environmental impact. It utilizes a review of the National Environmental Policy Act and…

  8. Preliminary engineering cost trends for highway projects.

    Science.gov (United States)

    2011-10-21

    Preliminary engineering (PE) for a highway project encompasses two efforts: planning to minimize the physical, social, and human environmental impacts of projects and engineering design to deliver the best alternative. PE efforts begin years in advan...

  9. School of Process, Environmental and Materials Engineering, Department of Fuel and Energy, University of Leeds report for the academic year 1998-99

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The annual report lists the research grants awarded during the session, records short course and events held, publications, conference attendances, degrees and diplomas awarded and committee membership of staff. It gives summaries of investigations being undertaken by research students reading for higher degrees. The main research theme remains combustion-based topics but increasingly with a renewable energy aspect, working towards efficient use of combustion of fossil fuels and hence reduction of CO{sub 2} emissions and other pollutants, and increasing use of renewables especially biomass and solar energy. Projects are listed under headings: spark ignition engine emissions; diesel engine emissions; and process burners. Most projects are listed under the names of the supervisor.

  10. The designing of launch vehicles with liquid propulsion engines ensuring fire, explosion and environmental safety requirements of worked-off stages

    Science.gov (United States)

    Trushlyakov, V.; Shatrov, Ya.; Sujmenbaev, B.; Baranov, D.

    2017-02-01

    The paper addresses the problem of the launch vehicles (LV) with main liquid propulsion engines launch technogenic impact in different environment areas. Therefore, as the study subjects were chosen the worked-off stages (WS) with unused propellant residues in tanks, the cosmodrome ecological monitoring system, the worked-off stage design and construction solutions development system and the unified system with the "WS+the cosmodrome ecological monitoring system+design and construction solutions development system" feedback allowing to form the optimal ways of the WS design and construction parameters variations for its fire and explosion hazard management in different areas of the environment. It is demonstrated that the fire hazard effects of propellant residues in WS tanks increase the ecosystem disorder level for the Vostochny cosmodrome impact area ecosystem. Applying the system analysis, the proposals on the selection of technologies, schematic and WS design and construction solutions aimed to the fire and explosion safety improvement during the LV worked-off stages with the main liquid propulsion engines operation were formulated. Among them are the following: firstly, the unused propellant residues in tanks convective gasification based on the hot gas (heat carrier) supply in WS tanks after main liquid propulsion engines cutoff is proposed as the basic technology; secondly, the obtained unused propellant residues in WS tanks gasification products (evaporated propellant residues + pressurizing agent + heat carrier) are used for WS stabilization and orientation while descending trajectory moving. The applying of the proposed technologies allows providing fire and explosion safety requirements of LV with main liquid propulsion engines practically.

  11. A New Nonmonetary Metric for Indicating Environmental Benefits from Ecosystem Restoration Projects of the U.S. Army Corps of Engineers, Report 2

    Science.gov (United States)

    2010-07-01

    genetic distinctiveness found in biotic communities based on taxonomic classification at the species and genus level. At this time, the species...Intergenerational equity and sustainable options. In Fairness and futurity: Essays on environmental sustainability and social justice, ed. A. Dobson, 118-150. New

  12. Examining the efficiency of muffle furnance-induced alkaline hydrolysis in determining the titanium content of environmental samples containing engineered titanium dioxide particles

    Science.gov (United States)

    A novel muffle furnace (MF)-based potassium hydroxide (KOH) fusion digestion technique was developed and its comparative digestion and dissolution efficacy for different titanium dioxide nanoparticles (TiO2-NPs)/environmental matrices was evaluated. Digestion of different enviro...

  13. Annual Site Environmental Report, Department of Energy Operations at the Energy Technology Engineering Center – Area IV, Santa Susana Field Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Frazee, Brad [North Wind, Inc., Idaho Falls, ID (United States); Hay, Scott [North Wind, Inc., Idaho Falls, ID (United States); Wondolleck, John [North Wind, Inc., Idaho Falls, ID (United States); Sorrels, Earl [North Wind, Inc., Idaho Falls, ID (United States); Rutherford, Phil [North Wind, Inc., Idaho Falls, ID (United States); Dassler, David [North Wind, Inc., Idaho Falls, ID (United States); Jones, John [North Wind, Inc., Idaho Falls, ID (United States)

    2015-05-01

    This Annual Site Environmental Report (ASER) for 2014 describes the environmental conditions related to work performed for the DOE at Area IV of the Santa Susana Field Laboratory (SSFL). The ETEC, a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, operation and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988, and all subsequent radiological work has been directed toward environmental restoration and decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.

  14. ENVIRONMENTAL POLLUTION

    OpenAIRE

    Reyna Ramos, julio

    2014-01-01

    The article shows the complexity of the problem of environmental pollution and what can be the possible solutions to the problem. Also, how the Industrial Engineering can contribute to the prevention and control of pollution. El artículo muestra la complejidad del problema de la contaminación ambiental y cuáles pueden ser las propuestas de solución al problema. Así mismo, cómo la Ingeniería Industrial puede contribuir a la prevención y control de la contaminación.

  15. Development and validation of an environmentally friendly attenuated total reflectance in the mid-infrared region method for the determination of ethanol content in used engine lubrication oil.

    Science.gov (United States)

    Hatanaka, Rafael Rodrigues; Sequinel, Rodrigo; Gualtieri, Carlos Eduardo; Tercini, Antônio Carlos Bergamaschi; Flumignan, Danilo Luiz; de Oliveira, José Eduardo

    2013-05-15

    Lubricating oils are crucial in the operation of automotive engines because they both reduce friction between moving parts and protect against corrosion. However, the performance of lubricant oil may be affected by contaminants, such as gasoline, diesel, ethanol, water and ethylene glycol. Although there are many standard methods and studies related to the quantification of contaminants in lubricant oil, such as gasoline and diesel oil, to the best of our knowledge, no methods have been reported for the quantification of ethanol in used Otto cycle engine lubrication oils. Therefore, this work aimed at the development and validation of a routine method based on partial least-squares multivariate analysis combined with attenuated total reflectance in the mid-infrared region to quantify ethanol content in used lubrication oil. The method was validated based on its figures of merit (using the net analyte signal) as follows: limit of detection (0.049%), limit of quantification (0.16%), accuracy (root mean square error of prediction=0.089% w/w), repeatability (0.05% w/w), fit (R(2)=0.9997), mean selectivity (0.047), sensitivity (0.011), inverse analytical sensitivity (0.016% w/w(-1)) and signal-to-noise ratio (max: 812.4 and min: 200.9). The results show that the proposed method can be routinely implemented for the quality control of lubricant oils. Copyright © 2013 Elsevier B.V. All rights reserved.

  16. Mechanical engineering

    CERN Document Server

    Darbyshire, Alan

    2010-01-01

    Alan Darbyshire's best-selling text book provides five-star high quality content to a potential audience of 13,000 engineering students. It explains the most popular specialist units of the Mechanical Engineering, Manufacturing Engineering and Operations & Maintenance Engineering pathways of the new 2010 BTEC National Engineering syllabus. This challenging textbook also features contributions from specialist lecturers, ensuring that no stone is left unturned.

  17. Intelligent environmental data warehouse

    International Nuclear Information System (INIS)

    Ekechukwu, B.

    1998-01-01

    Making quick and effective decisions in environment management are based on multiple and complex parameters, a data warehouse is a powerful tool for the over all management of massive environmental information. Selecting the right data from a warehouse is an important factor consideration for end-users. This paper proposed an intelligent environmental data warehouse system. It consists of data warehouse to feed an environmental researchers and managers with desire environmental information needs to their research studies and decision in form of geometric and attribute data for study area, and a metadata for the other sources of environmental information. In addition, the proposed intelligent search engine works according to a set of rule, which enables the system to be aware of the environmental data wanted by the end-user. The system development process passes through four stages. These are data preparation, warehouse development, intelligent engine development and internet platform system development. (author)

  18. Environmental protection

    International Nuclear Information System (INIS)

    Klinda, J.; Lieskovska, Z.

    1998-01-01

    In this chapter environmental protection in the Slovak Republic in 1997 are reviewed. The economics of environmental protection, state budget, Slovak state environmental fund, economic instruments, environmental laws, environmental impact assessment, environmental management systems, and environmental education are presented

  19. Next Generation Prokaryotic Engineering

    NARCIS (Netherlands)

    Mougiakos, Ioannis; Bosma, Elleke F.; Vos, de Willem M.; Kranenburg, van Richard; Oost, van der John

    2016-01-01

    The increasing demand for environmentally friendly production processes of green chemicals and fuels has stimulated research in microbial metabolic engineering. CRISPR-Cas-based tools for genome editing and expression control have enabled fast, easy, and accurate strain development for

  20. Genetic Engineering of Insects

    Indian Academy of Sciences (India)

    management, vector management in public health, produc- tion of medically important proteins and genetic improve- ment of beneficial insects like parasitoids, predators, silk worm and honey bee. The proposed release of genetically engineered insects is evoking serious debate among research- ers and environmental ...