WorldWideScience

Sample records for niecs includes detailed

  1. Residential-energy-demand modeling and the NIECS data base: an evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Cowing, T.G.; Dubin, J.A.; McFadden, D.

    1982-01-01

    The purpose of this report is to evaluate the 1978-1979 National Interim Energy Consumption Survey (NIECS) data base in terms of its usefulness for estimating residential energy demand models based on household appliance choice and utilization decisions. The NIECS contains detailed energy usage information at the household level for 4081 households during the April 1978 to March 1979 period. Among the data included are information on the structural and thermal characteristics of the housing unit, demographic characteristics of the household, fuel usage, appliance characteristics, and actual energy consumption. The survey covers the four primary residential fuels-electricity, natural gas, fuel oil, and liquefied petroleum gas - and includes detailed information on recent household conservation and retrofit activities. Section II contains brief descriptions of the major components of the NIECS data set. Discussions are included on the sample frame and the imputation procedures used in NIECS. There are also two extensive tables, giving detailed statistical and other information on most of the non-vehicle NIECS variables. Section III contains an assessment of the NIECS data, focusing on four areas: measurement error, sample design, imputation problems, and additional data needed to estimate appliance choice/use models. Section IV summarizes and concludes the report.

  2. Numerical optimization of conical flow waveriders including detailed viscous effects

    Science.gov (United States)

    Bowcutt, Kevin G.; Anderson, John D., Jr.; Capriotti, Diego

    1987-01-01

    A family of optimized hypersonic waveriders is generated and studied wherein detailed viscous effects are included within the optimization process itself. This is in contrast to previous optimized waverider work, wherein purely inviscid flow is used to obtain the waverider shapes. For the present waveriders, the undersurface is a streamsurface of an inviscid conical flowfield, the upper surface is a streamsurface of the inviscid flow over a tapered cylinder (calculated by the axisymmetric method of characteristics), and the viscous effects are treated by integral solutions of the boundary layer equations. Transition from laminar to turbulent flow is included within the viscous calculations. The optimization is carried out using a nonlinear simplex method. The resulting family of viscous hypersonic waveriders yields predicted high values of lift/drag, high enough to break the L/D barrier based on experience with other hypersonic configurations. Moreover, the numerical optimization process for the viscous waveriders results in distinctly different shapes compared to previous work with inviscid-designed waveriders. Also, the fine details of the viscous solution, such as how the shear stress is distributed over the surface, and the location of transition, are crucial to the details of the resulting waverider geometry. Finally, the moment coefficient variations and heat transfer distributions associated with the viscous optimized waveriders are studied.

  3. Method for including detailed evaluation of daylight levels in Be06

    DEFF Research Database (Denmark)

    Petersen, Steffen

    2008-01-01

    Good daylight conditions in office buildings have become an important issue due to new European regulatory demands which include energy consumption for electrical lighting in the building energy frame. Good daylight conditions in offices are thus in increased focus as an energy conserving measure....... In order to evaluate whether a certain design is good daylight design or not building designers must perform detailed evaluation of daylight levels, including the daylight performance of dynamic solar shadings, and include these in the energy performance evaluation. However, the mandatory national...... calculation tool in Denmark (Be06) for evaluating the energy performance of buildings is currently using a simple representation of available daylight in a room and simple assumptions regarding the control of shading devices. In a case example, this is leading to an overestimation of the energy consumption...

  4. PIV Logon Configuration Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Glen Alan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-03-04

    This document details the configurations and enhancements implemented to support the usage of federal Personal Identity Verification (PIV) Card for logon on unclassified networks. The guidance is a reference implementation of the configurations and enhancements deployed at the Los Alamos National Laboratory (LANL) by Network and Infrastructure Engineering – Core Services (NIE-CS).

  5. Assessing CO2 Mitigation Options Utilizing Detailed Electricity Characteristics and Including Renewable Generation

    Science.gov (United States)

    Bensaida, K.; Alie, Colin; Elkamel, A.; Almansoori, A.

    2017-08-01

    This paper presents a novel techno-economic optimization model for assessing the effectiveness of CO2 mitigation options for the electricity generation sub-sector that includes renewable energy generation. The optimization problem was formulated as a MINLP model using the GAMS modeling system. The model seeks the minimization of the power generation costs under CO2 emission constraints by dispatching power from low CO2 emission-intensity units. The model considers the detailed operation of the electricity system to effectively assess the performance of GHG mitigation strategies and integrates load balancing, carbon capture and carbon taxes as methods for reducing CO2 emissions. Two case studies are discussed to analyze the benefits and challenges of the CO2 reduction methods in the electricity system. The proposed mitigations options would not only benefit the environment, but they will as well improve the marginal cost of producing energy which represents an advantage for stakeholders.

  6. Influences on physicians' adoption of electronic detailing (e-detailing).

    Science.gov (United States)

    Alkhateeb, Fadi M; Doucette, William R

    2009-01-01

    E-detailing means using digital technology: internet, video conferencing and interactive voice response. There are two types of e-detailing: interactive (virtual) and video. Currently, little is known about what factors influence physicians' adoption of e-detailing. The objectives of this study were to test a model of physicians' adoption of e-detailing and to describe physicians using e-detailing. A mail survey was sent to a random sample of 2000 physicians practicing in Iowa. Binomial logistic regression was used to test the model of influences on physician adoption of e-detailing. On the basis of Rogers' model of adoption, the independent variables included relative advantage, compatibility, complexity, peer influence, attitudes, years in practice, presence of restrictive access to traditional detailing, type of specialty, academic affiliation, type of practice setting and control variables. A total of 671 responses were received giving a response rate of 34.7%. A total of 141 physicians (21.0%) reported using of e-detailing. The overall adoption model for using either type of e-detailing was found to be significant. Relative advantage, peer influence, attitudes, type of specialty, presence of restrictive access and years of practice had significant influences on physician adoption of e-detailing. The model of adoption of innovation is useful to explain physicians' adoption of e-detailing.

  7. PERUBAHAN SOSIAL KEDUDUKAN DAN PERAN MAMAK TERHADAP ANAK DAN KEMENAKAN DI RANAH MINANG

    Directory of Open Access Journals (Sweden)

    Sri Natin

    2008-06-01

    Full Text Available The result of this research proved that origin of mother’s position and role is very closed to the child and nephew/niece because the cultural concept based on equality of status among human being makes the harmony of life between man and woman. Because of the position of sumondonese is not as high as one in community of Patriarkhi to encourage obtaining child (quality of self competence of knowledge and science by wandering. The social change of mother’s position and role is likely caused by 2 reasons; Different view of phenomenon that nature must change, time must rotate and experience is a teacher. Change of father’s position as sumondonese (the honor guest becomes a father in family of Batih. The improvement of education and social status of nephew/niece, some mothers feel reluctant to guide the nephew/niece. Less intensity of relation is caused by far distance of residence, meanwhile the economic condition is very limited, caused by  mother’s various activities as well. Change of relative member’s behavior is caused by lack of attention and care or mother may be sel. sh, therefore the faithfulness of nephew/niece decreases.

  8. HEREDITARY INTRAVENTRICULAR CONDUCTION DISORDERS IN THE FAMILY FROM KRASNOYARSK

    Directory of Open Access Journals (Sweden)

    A. A. Chernova

    2011-01-01

    Full Text Available Pedigree of the family from Krasnoyarsk city with hereditary disorders of intracardiac conduction was studied. The diagnosis of each family member was verified by electrocardiography (ECG, echocardiography , bicycle ergometry , ECG Holter monitoring. The family 10-year follow-up showed familial aggregation of intracardiac conduction disorders in grandson, niece, son of the proband niece, ie, in the III-degree relatives. Family history of III-degree relatives with intracardiac conduction disorders and discordant pathology is identified.

  9. AHP 31: The Lost World of Ladakh – Early Photographic Journeys in the Indian Himalaya 1931 – 1934

    Directory of Open Access Journals (Sweden)

    Roger Bates

    2014-08-01

    Full Text Available A superb collection of 150 black-and-white photographs of 1930s Ladakh, capturing its final days as a hub of trade routes between Tibet and Kashmir, India and Yarkand. These portraits of people, landscapes and Buddhist ceremonies taken by amateur photographer Rupert Wilmot, are notable for their careful composition, fine detail and engaging informality. They have been meticulously researched and captioned by Nicky Harman and Roger Bates, respectively, niece and nephew of Rupert Wilmot, and include maps, an introduction and a bibliography. Of considerable historical and ethnographic interest. Claude Rupert Trench Wilmot (1897-1961 was a British army officer stationed in India during the 1930s, and a talented amateur photographer. Nicky Harman translates Chinese literature, and was formerly a lecturer at Imperial College London. Roger Bates digitized the photographs. A retired engineer, he has many years of experience working in digital photography.

  10. E-detailing: information technology applied to pharmaceutical detailing.

    Science.gov (United States)

    Montoya, Isaac D

    2008-11-01

    E-detailing can be best described as the use of information technology in the field of pharmaceutical detailing. It is becoming highly popular among pharmaceutical companies because it maximizes the time of the sales force, cuts down the cost of detailing and increases physician prescribing. Thus, the application of information technology is proving to be beneficial to both physicians and pharmaceutical companies. When e-detailing was introduced in 1996, it was limited to the US; however, numerous other countries soon adopted this novel approach to detailing and now it is popular in many developed nations. The objective of this paper is to demonstrate the rapid growth of e-detailing in the field of pharmaceutical marketing. A review of e-detailing literature was conducted in addition to personal conversations with physicians. E-detailing has the potential to reduce marketing costs, increase accessibility to physicians and offer many of the advantages of face-to-face detailing. E-detailing is gaining acceptance among physicians because they can access the information of a pharmaceutical product at their own time and convenience. However, the drug safety aspect of e-detailing has not been examined and e-detailing remains a supplement to traditional detailing and is not yet a replacement to it.

  11. Methodological Details and Full Bibliography

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset has several components, The first part describes fully our literature review, providing details not included in the text. The second part provides all...

  12. Clinical professional governance for detailed clinical models.

    Science.gov (United States)

    Goossen, William; Goossen-Baremans, Anneke

    2013-01-01

    This chapter describes the need for Detailed Clinical Models for contemporary Electronic Health Systems, data exchange and data reuse. It starts with an explanation of the components related to Detailed Clinical Models with a brief summary of knowledge representation, including terminologies representing clinic relevant "things" in the real world, and information models that abstract these in order to let computers process data about these things. Next, Detailed Clinical Models are defined and their purpose is described. It builds on existing developments around the world and accumulates in current work to create a technical specification at the level of the International Standards Organization. The core components of properly expressed Detailed Clinical Models are illustrated, including clinical knowledge and context, data element specification, code bindings to terminologies and meta-information about authors, versioning among others. Detailed Clinical Models to date are heavily based on user requirements and specify the conceptual and logical levels of modelling. It is not precise enough for specific implementations, which requires an additional step. However, this allows Detailed Clinical Models to serve as specifications for many different kinds of implementations. Examples of Detailed Clinical Models are presented both in text and in Unified Modelling Language. Detailed Clinical Models can be positioned in health information architectures, where they serve at the most detailed granular level. The chapter ends with examples of projects that create and deploy Detailed Clinical Models. All have in common that they can often reuse materials from earlier projects, and that strict governance of these models is essential to use them safely in health care information and communication technology. Clinical validation is one point of such governance, and model testing another. The Plan Do Check Act cycle can be applied for governance of Detailed Clinical Models

  13. The devil is in the detail: children's recollection of details about their prior experiences.

    Science.gov (United States)

    Strange, Deryn; Hayne, Harlene

    2013-01-01

    Adults sometimes report highly specific details of childhood events, including the weather, what they or others were wearing, as well as information about what they or others said or were thinking at the time. When these details are reported in the course of research they shape our theories of memory development; when they are reported in a criminal trial they influence jurors' evaluation of guilt or innocence. The key question is whether these details were encoded at the time the event took place or have been added after the fact. We addressed this question prospectively by examining the memory accounts of children. In Experiment 1 we coded the reports of 5- to 6-year-olds and 9- to 10-year-olds who had experienced a unique event. We found that spontaneous mentions of these specific details were exceedingly rare. In Experiment 2 we questioned additional children about a similar event using specific questions to extract those details. We found that 9- to 10-year-olds were able to accurately answer, while 5- to 6-year-olds had considerable difficulty. Moreover, when the younger children did respond they provided generic, forensically inadequate, information. These data have important implications for the courtroom and for current theories of memory development and childhood amnesia.

  14. The detail is dead - long live the detail!

    DEFF Research Database (Denmark)

    Larsen, Steen Nepper; Dalgaard, Kim; Kerstens, Vencent

    2018-01-01

    architecture when we look into architectural history. Too classic examples are; Adolf Loos who provoked already in 1908 with his statement; "Ornament and Crime", which contested the unconscious decorations of contemporary architects. Similarly, referring to the little need for superfluous detailing; "Less...... not change the fact that it is more important than ever to bring this 'small' architectural world to attention. Today, the construction industry is dictated by an economic management that does not leave much room for thorough studies of architectural details or visionary experiments. Today's more efficient......_Delft about the Symposium; "The Detail is Dead - Long Live the Detail". For this occasion a number of leading Danish and Northern European architects, researchers and companies were invited to discuss and suggest their 'architectural detail' and the challenges they face in today's construction. This book...

  15. Results of Detailed Hydrologic Characterization Tests - Fiscal Year 2000

    International Nuclear Information System (INIS)

    Spane, Frank A; Thorne, Paul D; Newcomer, Darrell R

    2001-01-01

    This report provides the results of detailed hydrologic characterization tests conducted within eleven Hanford Site wells during fiscal year 2000. Detailed characterization tests performed included groundwater-flow characterization; barometric response evaluation; slug tests; single-well tracer tests; constant-rate pumping tests; and in-well, vertical flow tests. Hydraulic property estimates obtained from the detailed hydrologic tests include transmissivity; hydraulic conductivity; specific yield; effective porosity; in-well, lateral flow velocity; aquifer-flow velocity; vertical distribution of hydraulic conductivity (within the well-screen section); and in-well, vertical flow velocity. In addition, local groundwater-flow characteristics (i.e., hydraulic gradient and flow direction) were determined for four sites where detailed well testing was performed

  16. 45 CFR 98.2 - Definitions.

    Science.gov (United States)

    2010-10-01

    ... provides child care services only to eligible children who are, by marriage, blood relationship, or court decree, the grandchild, great grandchild, sibling (if such provider lives in separate residence), niece...

  17. Author Details

    African Journals Online (AJOL)

    Details PDF · Vol 22, No 2 (1999) - Articles Vegetation under different tree species in Acacia woodland in the Rift Valley of Ethiopia Details PDF · Vol 22, No 2 (1999) - Articles Preliminary evaluation of Phytomyza orobanchia (Diptera: Agromyzidae) as a controller of Orobanche spp in Ethiopia Details PDF. ISSN: 2520–7997.

  18. Fatigue-Prone Details in Steel Bridges

    Directory of Open Access Journals (Sweden)

    Mohsen Heshmati

    2012-11-01

    Full Text Available This paper reviews the results of a comprehensive investigation including more than 100 fatigue damage cases, reported for steel and composite bridges. The damage cases are categorized according to types of detail. The mechanisms behind fatigue damage in each category are identified and studied. It was found that more than 90% of all reported damage cases are of deformation-induced type and generated by some kind of unintentional or otherwise overlooked interaction between different load-carrying members or systems in the bridge. Poor detailing, with unstiffened gaps and abrupt changes in stiffness at the connections between different members were also found to contribute to fatigue cracking in many details.

  19. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... An algorithm to retrieve Land Surface Temperature using Landsat-8 Dataset Abstract PDF. ISSN: 2225-8531.

  20. Main: Clone Detail [KOME

    Lifescience Database Archive (English)

    Full Text Available Clone Detail Mapping Pseudomolecule data detail Detail information Mapping to the T...IGR japonica Pseudomolecules kome_mapping_pseudomolecule_data_detail.zip kome_mapping_pseudomolecule_data_detail ...

  1. Author Details

    African Journals Online (AJOL)

    PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES. Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads.

  2. Evaluation of the 235U prompt fission neutron spectrum including a detailed analysis of experimental data and improved model information

    Science.gov (United States)

    Neudecker, Denise; Talou, Patrick; Kahler, Albert C.; White, Morgan C.; Kawano, Toshihiko

    2017-09-01

    We present an evaluation of the 235U prompt fission neutron spectrum (PFNS) induced by thermal to 20-MeV neutrons. Experimental data and associated covariances were analyzed in detail. The incident energy dependence of the PFNS was modeled with an extended Los Alamos model combined with the Hauser-Feshbach and the exciton models. These models describe prompt fission, pre-fission compound nucleus and pre-equilibrium neutron emissions. The evaluated PFNS agree well with the experimental data included in this evaluation, preliminary data of the LANL and LLNL Chi-Nu measurement and recent evaluations by Capote et al. and Rising et al. However, they are softer than the ENDF/B-VII.1 (VII.1) and JENDL-4.0 PFNS for incident neutron energies up to 2 MeV. Simulated effective multiplication factors keff of the Godiva and Flattop-25 critical assemblies are further from the measured keff if the current data are used within VII.1 compared to using only VII.1 data. However, if this work is used with ENDF/B-VIII.0β2 data, simulated values of keff agree well with the measured ones.

  3. Factors influencing detail detectability in radiologic imaging

    International Nuclear Information System (INIS)

    Gurvich, A.M.

    1985-01-01

    The detectability of various details is estimated quantitatively from the essential technical parameters of the imaging system and additional influencing factors including viewing of the image. The analysis implies the formation of the input radiation distribution (contrast formation, influence of kVp). Noise, image contrast (gamma), modulation transfer function and contrast threshold of the observer are of different influence on details of different size. Thus further optimization of imaging systems and their adaption to specific imaging tasks are facilitated

  4. Author Details

    African Journals Online (AJOL)

    An Overview of Africa's Marine Resources: Their Utilization and Sustainable Management Details · Vol 12, No 3 (2000) - Articles EDITORIAL Ganoderma Lucidum - Paramount among Medicinal Mushrooms. Details · Vol 15, No 3 (2003) - Articles Editorial: Africa's Mushrooms: A neglected bioresource whose time has come

  5. Author Details

    African Journals Online (AJOL)

    Petrology of the Cenomanian Upper Member of the Mamfe Embayment, southwestern Cameroon Details · Vol 38, No 1 (2002) - Articles Sequence stratigraphy of Iso field, western onshore Niger Delta, Nigeria Details · Vol 39, No 2 (2003) - Articles Preliminary studies on the lithostratigraphy and depositional environment of ...

  6. Wooden houses in detail. Holzhaeuser im Detail

    Energy Technology Data Exchange (ETDEWEB)

    Ruske, W. (ed.)

    1986-01-01

    Under the serial title 'Planning and construction of wooden houses', WEKA will publish a number of books of which this is the first. Details of design and construction are presented, e.g.: Details of modern one-family houses; Fundamentals of design and hints for planning of wooden houses and compact wooden structures; Constructional ecology, wood protection, thermal insulation, sound insulation; Modular systems for domestic buildings; The 'bookshelf-type' house at the Berlin International Construction Exhibition (IBA); Experience with do-it-yourself systems. With 439 figs.

  7. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Singh, J. Vol 3, No 2 (2011) - Articles Plane waves in a rotating generalized thermo-elastic solid with voids. Abstract PDF. ISSN: 2141-2839. AJOL African Journals Online. HOW TO USE AJOL.

  8. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Vol 12 (2008) - Articles On the wave equations of shallow water with rough bottom topography. Abstract · Vol 14 (2009) - Articles Energy generation in a plant due to variable sunlight intensity

  9. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Vol 45 (2016) - Articles From vectors to waves and streams: An alternative approach to semantic maps1. Abstract PDF · Vol 48 (2017) - Articles Introduction: 'n Klein ietsie for Johan Oosthuizen

  10. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... to blast loadings. Abstract PDF · Vol 9, No 3S (2017): Special Issue - Articles Experimental and numerical investigation on blast wave propagation in soil structure. Abstract PDF. ISSN: 1112-9867.

  11. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Iliopsoas haematoma in a rugby player. Abstract PDF · Vol 29, No 1 (2017) - Articles The use of negative pressure wave treatment in athlete recovery. Abstract PDF. ISSN: 2078-516X. AJOL African ...

  12. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... No 3S (2017): Special Issue - Articles Experimental and numerical investigation on blast wave propagation in soil structure. Abstract PDF · Vol 9, No 3S (2017): Special Issue - Articles Simulation on ...

  13. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Duwa, S S. Vol 8 (2004) - Articles Lower hybrid waves instability in a velocity–sheared inhomogenous charged dust beam. Abstract · Vol 9 (2005) - Articles The slide away theory of lower hybrid bursts

  14. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... The use of negative pressure wave treatment in athlete recovery. Abstract PDF · Vol 29, No 1 (2017) - Articles The prevalence, risk factors predicting injury and the severity of injuries sustained during ...

  15. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Vol 29, No 1 (2017) - Articles The use of negative pressure wave treatment in athlete recovery. Abstract PDF · Vol 29, No 1 (2017) - Articles The prevalence, risk factors predicting injury and the ...

  16. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Isa, M.F.M.. Vol 9, No 3S (2017): Special Issue - Articles Experimental and numerical investigation on blast wave propagation in soil structure. Abstract PDF · Vol 9, No 3S (2017): Special Issue - ...

  17. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Abstract PDF · Vol 3, No 6 (2011) - Articles Mixed convection flow and heat transfer in a vertical wavy channel containing porous and fluid layer with traveling thermal waves. Abstract PDF · Vol 3, No 8 ...

  18. Author Details

    African Journals Online (AJOL)

    Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Ismail, A. Vol 9, No 3S (2017): Special Issue - Articles Investigate of wave absorption performance for oil palm frond and empty fruit bunch at 5.8 GHz. Abstract PDF · Vol 9, No 3S (2017): Special Issue ...

  19. A detailed kinetic mechanism including methanol and nitrogen pollutants relevant to the gas-phase combustion and pyrolysis of biomass-derived fuels

    Energy Technology Data Exchange (ETDEWEB)

    Coda Zabetta, Edgardo; Hupa, Mikko [Aabo Akademi Process Chemistry Centre, Piispankatu 8, FI-20500 Turku (Finland)

    2008-01-15

    A detailed chemical kinetic mechanism for the simulation of the gas-phase combustion and pyrolysis of biomass-derived fuels was compiled by assembling selected reaction subsets from existing mechanisms (parents). The mechanism, here referred to as ''AaA,'' includes reaction subsets for the oxidation of hydrogen (H{sub 2}), carbon monoxide (CO), light hydrocarbons (C{sub 1} and C{sub 2}), and methanol (CH{sub 3}OH). The mechanism also takes into account reaction subsets of nitrogen pollutants, including the reactions relevant to staged combustion, reburning, and selective noncatalytic reduction (SNCR). The AaA mechanism was validated against suitable experimental data from the literature. Overall, the AaA mechanism gave more accurate predictions than three other mechanisms of reference, although the reference mechanisms performed better occasionally. The predictions from AaA were also found to be consistent with the predictions of its parent mechanisms within most of their range of validity, thus transferring the validity of the parents to the inheriting mechanism (AaA). In parametric studies the AaA mechanism predicted that the effect of methanol on combustion and pollutants is often similar to that of light hydrocarbons, but it also showed that there are important exceptions, thus suggesting that methanol should be taken into account when simulating biomass combustion. To our knowledge, the AaA mechanism is currently the only mechanism that accounts for the chemistry of methanol and nitrogen relevant to the gas-phase combustion and pyrolysis of biomass-derived fuels. (author)

  20. Derivation of Markov processes that violate detailed balance

    Science.gov (United States)

    Lee, Julian

    2018-03-01

    Time-reversal symmetry of the microscopic laws dictates that the equilibrium distribution of a stochastic process must obey the condition of detailed balance. However, cyclic Markov processes that do not admit equilibrium distributions with detailed balance are often used to model systems driven out of equilibrium by external agents. I show that for a Markov model without detailed balance, an extended Markov model can be constructed, which explicitly includes the degrees of freedom for the driving agent and satisfies the detailed balance condition. The original cyclic Markov model for the driven system is then recovered as an approximation at early times by summing over the degrees of freedom for the driving agent. I also show that the widely accepted expression for the entropy production in a cyclic Markov model is actually a time derivative of an entropy component in the extended model. Further, I present an analytic expression for the entropy component that is hidden in the cyclic Markov model.

  1. Results of Detailed Hydrologic Characterization Tests—Fiscal and Calendar Year 2005

    Energy Technology Data Exchange (ETDEWEB)

    Spane, Frank A.; Newcomer, Darrell R.

    2008-02-27

    This report provides the results of detailed hydrologic characterization tests conducted within selected Hanford Site wells during fiscal and calendar year 2005. Detailed characterization tests performed included groundwater-flow characterization, barometric response evaluation, slug tests, in-well vertical groundwater-flow assessments, and a single-well tracer and constant-rate pumping test. Hydraulic property estimates obtained from the detailed hydrologic tests include hydraulic conductivity, transmissivity, specific yield, effective porosity, in-well lateral and vertical groundwater-flow velocity, aquifer groundwater-flow velocity, and depth-distribution profiles of hydraulic conductivity. In addition, local groundwater-flow characteristics (i.e., hydraulic gradient and flow direction) were determined for a site where detailed well testing was performed. Results obtained from these tests provide hydrologic information that supports the needs of Resource Conservation and Recovery Act waste management area characterization as well as sitewide groundwater monitoring and modeling programs. These results also reduce the uncertainty of groundwater-flow conditions at selected locations on the Hanford Site.

  2. A detailed BWR recirculation loop model for RELAP

    Energy Technology Data Exchange (ETDEWEB)

    Araiza-Martínez, Enrique, E-mail: enrique.araiza@inin.gob.mx; Ortiz-Villafuerte, Javier, E-mail: javier.ortiz@inin.gob.mx; Castillo-Durán, Rogelio, E-mail: rogelio.castillo@inin.gob.mx

    2017-01-15

    Highlights: • A new detailed BWR recirculation loop model was developed for RELAP. • All jet pumps, risers, manifold, suction and control valves, and recirculation pump are modeled. • Model is tested against data from partial blockage of two jet pumps. • For practical applications, simulation results showed good agreement with available data. - Abstract: A new detailed geometric model of the whole recirculation loop of a BWR has been developed for the code RELAP. This detailed model includes the 10 jet pumps, 5 risers, manifold, suction and control valves, and the recirculation pump, per recirculation loop. The model is tested against data from an event of partial blockage at the entrance nozzle of one jet pump in both recirculation loops. For practical applications, simulation results showed good agreement with data. Then, values of parameters considered as figure of merit (reactor power, dome pressure, core flow, among others) for this event are compared against those from the common 1 jet pump per loop model. The results show that new detailed model led to a closer prediction of the reported power change. The detailed recirculation loop model can provide more reliable boundary condition data to a CFD models for studies of, for example, flow induced vibration, wear, and crack initiation.

  3. CMHC research project: Testing of air barrier construction details, II: Report

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-01

    Air leakage control through the building envelope of wood framed houses is more important than ever. The leakage of air is controlled by the air barrier system. There are several new technologies to construct an air barrier system for the building envelope. These are the Poly Approach, the Air Drywall Approach and the EASE system. The development of these systems was undertaken primarily by the building community without significant research and development. The purpose of this study was to determine the actual performance of several different types of construction details for each of the different approaches. Each of these details was designed and constructed using one of the air barrier methods and tested in the laboratory. The test details included the sill plate, the partition wall, the stair stringer, the electrical outlets, the bathtub detail, the plumbing stack detail, the metal chimney detail, the bathroom fan detail and the EASE wall system.

  4. Typical and Atypical Dementia Family Caregivers: Systematic and Objective Comparisons

    Science.gov (United States)

    Nichols, Linda O.; Martindale-Adams, Jennifer; Burns, Robert; Graney, Marshall J.; Zuber, Jeffrey

    2011-01-01

    This systematic, objective comparison of typical (spouse, children) and atypical (in-law, sibling, nephew/niece, grandchild) dementia family caregivers examined demographic, caregiving and clinical variables. Analysis was of 1,476 caregivers, of whom 125 were atypical, from the Resources for Enhancing Alzheimer's Caregivers Health (REACH I and II)…

  5. On Detailing in Contemporary Architecture

    DEFF Research Database (Denmark)

    Kristensen, Claus; Kirkegaard, Poul Henning

    2010-01-01

    Details in architecture have a significant influence on how architecture is experienced. One can touch the materials and analyse the detailing - thus details give valuable information about the architectural scheme as a whole. The absence of perceptual stimulation like details and materiality...... / tactility can blur the meaning of the architecture and turn it into an empty statement. The present paper will outline detailing in contemporary architecture and discuss the issue with respect to architectural quality. Architectural cases considered as sublime piece of architecture will be presented...

  6. Generalized detailed balance theory of solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Kirchartz, Thomas

    2009-12-12

    compatible with the Shockley-Queisser limit and the classical diode theory. For organic solar cells, exciton binding energies are sufficiently high, so that purely bipolar models are no longer applicable. Instead, excitonic transport has to be included. Thus, the inclusion of exciton transport into the bipolar detailed balance model leads to a generalized detailed balance model that simulates solar cells with predominantly bipolar transport, with predominantly excitonic transport and with every combination of both. Due to low exciton diffusion lengths, organic solar cells are usually combined with a specific device geometry, the bulk heterojunction. In a bulk heterojunction device, the whole bulk of the absorber is made up of distributed heterojunctions, where the exciton is transferred to a bound pair at the interface, which is then split into free electron and hole. The assumption that exciton transport is only relevant towards the next heterointerface allows to develop also a version of the detailed balance model that is applicable to bulk heterojunction cells. The last variation of the detailed balance model includes the process of impact ionisation as a means to generate more than one exciton from a single high energy photon. The model for multiple exciton generating absorbers identifies possible bottlenecks as well as maximum efficiencies of future solar cells that use this concept. Another direct consequence of the principle of detailed balance is a reciprocity theorem between electroluminescence and solar cell quantum efficiency. The theoretical part of this thesis discusses the validity range of this reciprocity and checks for each version of the model, whether the relation between electroluminescence and quantum efficiency is still applicable. The main result shows that voltage dependent carrier collection as encountered in low mobility pin-junction devices leads to deviations from the reciprocity, while it still holds for most pn-junction solar cells. The

  7. EPA Enforcement and Compliance History Online: Water Effluent Charts Details

    Data.gov (United States)

    U.S. Environmental Protection Agency — Detailed Discharge Monitoring Report (DMR) data supporting effluent charts for one Clean Water Act discharge permit. Includes effluent parameters, amounts discharged...

  8. Author Details

    African Journals Online (AJOL)

    Journal Home > Advanced Search > Author Details. Log in or Register ... (2013) - Articles Technical Note: Development of a Photobioreactor for Microalgae Culture ... Design, Construction and Evaluation of Motorized Okra Slicer Abstract PDF ...

  9. Detailed Chemical Kinetic Modeling of Hydrazine Decomposition

    Science.gov (United States)

    Meagher, Nancy E.; Bates, Kami R.

    2000-01-01

    The purpose of this research project is to develop and validate a detailed chemical kinetic mechanism for gas-phase hydrazine decomposition. Hydrazine is used extensively in aerospace propulsion, and although liquid hydrazine is not considered detonable, many fuel handling systems create multiphase mixtures of fuels and fuel vapors during their operation. Therefore, a thorough knowledge of the decomposition chemistry of hydrazine under a variety of conditions can be of value in assessing potential operational hazards in hydrazine fuel systems. To gain such knowledge, a reasonable starting point is the development and validation of a detailed chemical kinetic mechanism for gas-phase hydrazine decomposition. A reasonably complete mechanism was published in 1996, however, many of the elementary steps included had outdated rate expressions and a thorough investigation of the behavior of the mechanism under a variety of conditions was not presented. The current work has included substantial revision of the previously published mechanism, along with a more extensive examination of the decomposition behavior of hydrazine. An attempt to validate the mechanism against the limited experimental data available has been made and was moderately successful. Further computational and experimental research into the chemistry of this fuel needs to be completed.

  10. Author Details

    African Journals Online (AJOL)

    Journal Home > Advanced Search > Author Details. Log in or Register to ... No 1 (2014) - Articles Knowledge and Attitudes towards Basic Cardiopulmonary Resuscitation (CPR) among Community Nurses in Remo Area of Ogun State, Nigeria

  11. Author Details

    African Journals Online (AJOL)

    Journal Home > Advanced Search > Author Details ... Design and Implementation of an M/M/1 Queuing Model Algorithm and its Applicability in ... Vehicle Identification Technology to Intercept Small Arms and Ammunition on Nigeria Roads

  12. THULE: A detailed description

    International Nuclear Information System (INIS)

    Terry, M.J.

    1964-07-01

    This report describes the THULE scheme of lattice physics calculation which has been developed in FORTRAN for the IBM 7090. This scheme predicts the neutron flux over energy and space, for many groups and regions, together with reactivity and reaction rate edits for both a single lattice cell and a reactor core. This report describes in detail the input requirements for the THULE programme which forms the main part of the scheme. Brief descriptions of the 7090 programmes TED 6 and NOAH are included as appendices. TED 6 will produce the THULE edits from a WDSN output tape and NOAH is a version of the METHUSELAH programme which contains many of the THULE edits and will also produce input cards for THULE. (author)

  13. Author Details

    African Journals Online (AJOL)

    Journal Home > Advanced Search > Author Details. Log in or ... The prevention of mother-to-child HIV transmission programme and infant feeding practices ... Evaluation of a diagnostic algorithm for smear-negative pulmonary tuberculosis in ...

  14. Author Details

    African Journals Online (AJOL)

    Journal Home > Advanced Search > Author Details. Log in or Register to get ... Optical bus of centralized relay protection and automation system of medium voltage switchgear for data collection and transmission. Abstract PDF. ISSN: 1112- ...

  15. Analysis of local influences in structural details of the bridges

    Directory of Open Access Journals (Sweden)

    Adam RUDZIK

    2015-03-01

    Full Text Available The article analyses the problems of local influences in structural details of bridges as the critical locations, whose damages or excessive force may directly affect the safety of users. These analyses are shown on selected examples. Presented is the example of local changes in the forms of proper vibrations in the node of the truss bridge that can be used in expert issues concerning the causes of damages. The second example are the changes in stresses in the stay cable anchorage element including the nonlinear material models. Models of this type can be successfully used by engineers as they allow for analysis of selected structural details without the need for detailed mapping of the entire structure, but only a selected section.

  16. Revisiting the Seductive Details Effect in Multimedia Learning: Context-Dependency of Seductive Details

    Science.gov (United States)

    Ozdemir, Devrim; Doolittle, Peter

    2015-01-01

    The purpose of this study was to investigate the effects of context-dependency of seductive details on recall and transfer in multimedia learning environments. Seductive details were interesting yet irrelevant sentences in the instructional text. Two experiments were conducted. The purpose of Experiment 1 was to identify context-dependent and…

  17. Author Details

    African Journals Online (AJOL)

    Radwan M.D, Mona Ahmed. Vol 12, No 1 (2000) - Articles RELAPSING REMITTING MULTIPLE SCLEROSIS: CT AND MRI IMAGING VS CLINICAL FINDINGIN THE DIAGNOSIS AND DETERMINATION OF DISEASE ACTIVITY. Details. ISSN: 1110-5607. AJOL African Journals Online. HOW TO USE AJOL... for Researchers ...

  18. Cataloging the Pan-African Experience

    Science.gov (United States)

    Hayes, Dianne

    2012-01-01

    Of all the honors and accolades bibliophile and noted authority on the Underground Railroad Charles Blockson has received, being bequeathed recently with some of Harriet Tubman's personal items by her great-niece is one of the most significant experiences of his life. A longtime collector of books and rare items by and about African-Americans,…

  19. Author Details

    African Journals Online (AJOL)

    Green, J.M.. Vol 10, No 1 (2001) - Articles Information from Radio Telemetry on movements and exploitation of naturalized Rainbow trout, Oncorhynchus mykiss (Walbaum), in Kenya cold water streams. Details. ISSN: 0002-0036. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians ...

  20. Author Details

    African Journals Online (AJOL)

    Aderinokun, GA. Vol 9, No 1 (1999) - Articles Relative Influence Of Sociodemographic Variables On Oral Health And Habits Of Some Nigerian School Children Abstract · Vol 9, No 4 (1999) - Articles Oral health services in Nigeria Details. ISSN: 0189-2657. AJOL African Journals Online. HOW TO USE AJOL.

  1. Author Details

    African Journals Online (AJOL)

    Development of a trap to contaminate variegated grasshoppers (Zonocerus variegatus L.) (Orthoptera: Pyrgomorphidae) with Metarrhyzium flavo-viride Gams & Rozsypal in the field. Details · Vol 40, No 1 (2007) - Articles Yam pests in the Ashanti and Brong Ahafo regions of Ghana: A study of farmers\\' indigenous technical ...

  2. Author Details

    African Journals Online (AJOL)

    Geotechnical properties of lateritic soil developed over quartz schist in Ishara area, south western Nigeria Details · Vol 44, No 1 (2008) - Articles Comparative study of the influence of cement and lime stabilization on geotechnical properties of lateritic soil derived from pegmatite in Ago-Iwoye area, southwestern Nigeria

  3. Author Details

    African Journals Online (AJOL)

    SAMA, G. Vol 2 (2002): Supplement - Articles A Longitudinal Study of the Role of T Cell subset, Th1/Th2 cytokines and antiplasmodial antibodies in uncomplicated Malaria in a Village Population Chronically Exposed to Plasmodium falciparum Malaria. Details PDF · AJOL African Journals Online. HOW TO USE AJOL.

  4. Author Details

    African Journals Online (AJOL)

    KOUONTCHOU, Samuel. Vol 2 (2002): Supplement - Articles Prevalence of Multiple Concomitant Intestinal Parasitic Infections in Simbok a Malaria Endemic Village in Cameroon. Details PDF · Vol 2 (2002): Supplement - Articles A Longitudinal Study of the Role of T Cell subset, Th1/Th2 cytokines and antiplasmodial ...

  5. Author Details

    African Journals Online (AJOL)

    ALAKE, J. Vol 2 (2002): Supplement - Articles A Longitudinal Study of the Role of T Cell subset, Th1/Th2 cytokines and antiplasmodial antibodies in uncomplicated Malaria in a Village Population Chronically Exposed to Plasmodium falciparum Malaria. Details PDF · AJOL African Journals Online. HOW TO USE AJOL.

  6. Author Details

    African Journals Online (AJOL)

    A Preliminary Investigation of Relative Frequency of Undiagnosed and Previously Diagnosed Hypertension Before First Stroke in a Lagos Hospital Abstract · Vol 9, No 4 (1999) - Articles Localised tetanus in Lagos, Nigeria Details · Vol 9, No 4 (1999) - Articles Stroke with localised infarction of Wernicke's Area misdiagnosed ...

  7. Author Details

    African Journals Online (AJOL)

    Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text ... Abstract · Vol 17 (2010) - Articles Investigating The Travelling Wave Solution For an SIR Endemic Disease Model With No Disease Related Death (When The Spatial Spread Of The Susceptible Is Not Negligible). Abstract.

  8. Author Details

    African Journals Online (AJOL)

    Rakotonirina, Alice. Vol 2, No 2 (2002) - Articles Effect of the decoction of rhizomes of Cyperus articulatus on bicuculline-, N-methyl-D-aspartate- and strychnine-induced behavioural excitation and convulsions in mice. Details PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians ...

  9. Author Details

    African Journals Online (AJOL)

    NENTY, N. JOHNSON. Vol 7, No 3 (2001) - Articles Common errors and perfomance of students in junior secondary mathematics certificate examinations in Cross River State, Nigeria Details PDF. ISSN: 1118-0579. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's ...

  10. Author Details

    African Journals Online (AJOL)

    QUAKYI, A.I.. Vol 2 (2002): Supplement - Articles A Longitudinal Study of the Role of T Cell subset, Th1/Th2 cytokines and antiplasmodial antibodies in uncomplicated Malaria in a Village Population Chronically Exposed to Plasmodium falciparum Malaria. Details PDF · AJOL African Journals Online. HOW TO USE AJOL.

  11. Author Details

    African Journals Online (AJOL)

    Admasu, Assefa. Vol 22, No 2 (1999) - Articles Preliminary evaluation of Phytomyza orobanchia (Diptera: Agromyzidae) as a controller of Orobanche spp in Ethiopia Details PDF. ISSN: 2520–7997. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL ...

  12. Author Details

    African Journals Online (AJOL)

    Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Obtaining the green's function for electromagnetic waves propagating in layered in-homogeneous thin film media of spherical particles on a substrate. Abstract · Vol 20, No 2 (2008) - Articles solution growth and ...

  13. Author Details

    African Journals Online (AJOL)

    Lema, VM. Vol 80, No 9 (2003): - Articles Fournier's gangrene complicating vasectomy. Details PDF · Vol 86, No 6 (2009) - Articles Therapeutic misconception and clinical trials in sub-saharan Africa: A review. Abstract PDF · Vol 86, No 11 (2009) - Articles HIV/AIDS and pregnancy-related deaths in Blantyre, Malawi

  14. Author Details

    African Journals Online (AJOL)

    Motabagani, MA. Vol 80, No 9 (2003): - Articles Anomalies of the renal, phrenic and suprarenal arteries: Case Report Details PDF · Vol 81, No 3 (2004): - Articles Morphological study of the uncommon rectus sterni muscle in German cadavers. Abstract PDF. ISSN: 0012-835X. AJOL African Journals Online. HOW TO USE ...

  15. Author Details

    African Journals Online (AJOL)

    Ibeabuchi, NM. Vol 10, No 3 (2000) - Articles Comparison of the effects of Methylsalicylate Cream with cryotherapy on delayed onset muscle soreness. Details · Vol 22, No 2 (2012) - Articles X-ray Pelvimetry And Labour Outcome In Term Pregnancy In A Rural Nigerian Population Abstract. ISSN: 0189-2657. AJOL African ...

  16. Privacy Act System of Records: EPA Telecommunications Detail Records, EPA-32

    Science.gov (United States)

    Learn more about the EPA Telecommunications Detail Records System, including who is covered in the system, the purpose of data collection, routine uses for the system's records, and other security procedures.

  17. Author Details

    African Journals Online (AJOL)

    Brown, Duncan. Vol 16, No 2 (2002): Continental Africans & the Question of Identity - Articles Environment and Identity: Douglas Livingstone's A Littoral Zone Details. ISSN: 0256-004. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

  18. Author Details

    African Journals Online (AJOL)

    SONUGA, F A. Vol 6, No 1 (2000) - Articles Geophysical investigation of Karkarku earthdam embankment. Details. ISSN: 1118-0579. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL ...

  19. Author Details

    African Journals Online (AJOL)

    Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Vol 8 (2004) - Articles Further on stokes expansions for the finite amplitude water waves. Abstract · Vol 11 (2007) - Articles On the effects of wave steepness on higher order Stokes waves. Abstract. ISSN: 1116-4336.

  20. Author Details

    African Journals Online (AJOL)

    Focho, DA. Vol 2, No 1 (2002) - Articles Observations on the Meiotic Process in the African Pest Grasshopper Taphronota thaelephora Stal. (Orthoptera : Pyrgomorphidae) Details PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

  1. Monte Carlo methods beyond detailed balance

    NARCIS (Netherlands)

    Schram, Raoul D.; Barkema, Gerard T.|info:eu-repo/dai/nl/101275080

    2015-01-01

    Monte Carlo algorithms are nearly always based on the concept of detailed balance and ergodicity. In this paper we focus on algorithms that do not satisfy detailed balance. We introduce a general method for designing non-detailed balance algorithms, starting from a conventional algorithm satisfying

  2. Author Details

    African Journals Online (AJOL)

    McCarthy, Greg. Vol 15, No 1 (2001): Media Freedom and Human Rights - Articles Caught between Empires: Ambivalence in Australian Films Details. ISSN: 0256-004. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and ...

  3. Author Details

    African Journals Online (AJOL)

    Ligthelm, A.A.. Vol 5, No 2 (2001) - Articles Community attitudes towards Casinos and the estimated magnitude of problem gambling The Mpumalanga case. Details PDF. ISSN: 1027-4332. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

  4. Author Details

    African Journals Online (AJOL)

    Comarof, Jean. Vol 1999, No 3-4 (1999) - Articles Alien-Nation: Zombies, Immigrants and Millennial Capitalism Details. ISSN: 0850-8712. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact ...

  5. Author Details

    African Journals Online (AJOL)

    Njubi, Francis. Vol 15, No 1 (2001): Media Freedom and Human Rights - Articles New Media, Old Struggles: Pan Africanism, Anti-racism and Information Technology Details. ISSN: 0256-004. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

  6. Author Details

    African Journals Online (AJOL)

    Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Okeke, EO. Vol 10 (2006) - Articles Analysis of Stokes waves theory as a diffusion problem. Abstract · Vol 11 (2007) - Articles On the impact of wave-current on Stokes waves. Abstract. ISSN: 1116-4336. AJOL African ...

  7. Author Details

    African Journals Online (AJOL)

    Love, Alison. Vol 29, No 2 (2002) - Articles Policy-makers, the Press and Politics: Reporting a Public Policy Document Details. ISSN: 0379-0622. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use ...

  8. Author Details

    African Journals Online (AJOL)

    Idowu, OO. Vol 8, No 1 (2003) - Articles Evaluation of Different Substrates and Combinations on the Growth of Pleurotus pulmonarius (Fries) Quelet (Sajor-caju) Details. ISSN: 1118-2733. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

  9. Author Details

    African Journals Online (AJOL)

    Odigie, IP. Vol 10, No 4 (2000) - Articles High dose vitamin E administration attenuates hypertensin in 2-Kidney 1 Clip Goldblatt hypertensive rats. Details. ISSN: 0189-2657. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms ...

  10. Author Details

    African Journals Online (AJOL)

    Warnorff, DK. Vol 13, No 4 (2001) - Articles Development of a scoring system for the diagnosis of tuberculous lymphadenitis. Details PDF. ISSN: 1995-7262. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions ...

  11. Adapting Bioretention Construction Details to Local Practices in Finland

    Directory of Open Access Journals (Sweden)

    Outi Tahvonen

    2018-01-01

    Full Text Available Bioretention is a method of storm water management that includes several processes following the natural hydrological cycle. Bioretention, or variations of it, include rain gardens and bioswales, infiltrates, filtrates, evapotranspirates, and help to store and manage storm water run-off. A bioretention cell retains water, removes pollutants, and provides water elements for urban green areas. Although bioretention is a promising method for multifunctional storm water management, its construction details should not be copied from other climatic areas. A direct application may dismiss local conditions, materials, and construction practices. This study aimed to adapt construction details for bioretention to Finnish local practices and conditions and to formulate bioretention constructions that balance water, soil, and vegetation. First, construction details were reviewed, then local adaptations were applied, and finally, the application and two variations of growing media in two construction depths were tested in a test field in Southern Finland. Sandy growing media allowed the efficient retention of water during the first year, but failed to provide vital growth. The use of topsoil and compost in the growing media improved growth, but held high electrical conductivity after infiltration. All the experimental cells in the test field showed activity during the melting periods, both during winter and spring. If bioretention plays a multifunctional role in urban design and engineered ecology, the design parameters should not only focus on storm water quantity, but also on quality management and vegetation growth.

  12. Author Details

    African Journals Online (AJOL)

    EKPA, O. D.. Vol 7, No 2 (2001) - Articles Variental differences AND polymorphism in palm oil: a case study of palm oils blended with coconut oil. Details PDF. ISSN: 1118-0579. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners ...

  13. Author Details

    African Journals Online (AJOL)

    Kioni, P N. Vol 9, No 1 (2007) - Articles Detailed structure of pipe flow with water hammer oscillations. Abstract. ISSN: 1561-7645. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL ...

  14. Author Details

    African Journals Online (AJOL)

    Legwaila, GM. Vol 12 (2003) - Articles Review of sweet sorghum: a potential cash and forage crop in Botswana Details. ISSN: 1021-0873. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact ...

  15. Author Details

    African Journals Online (AJOL)

    Akum, ZE. Vol 1, No 3 (2001) - Articles Basic home range characteristics for the conservation of the African grey parrot in the Korup national park, Cameroon Details PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms ...

  16. Author Details

    African Journals Online (AJOL)

    Bobcokono, Irene Yatabene. Vol 1, No 1 (2001) - Articles Utilisation du papier filtre dans la gestion de programme de lute contre le SIDA au Cameroun Details PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and ...

  17. Author Details

    African Journals Online (AJOL)

    Erasmus, GJ. Vol 1, No 1 (2001) - Articles Genetic parameter estimates for growth traits in purebred Gudali and two-breed synthetic Wakwa beef cattle in a tropical environment. Details PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

  18. Father Figures in the Novels of Jane Austen

    Science.gov (United States)

    Odeh, Adli

    2011-01-01

    Miniaturist as Jane Austen is, she has depicted the life of a few families. In her letter to her niece, Anna Austen, she writes: "three or four families in a country village is the very thing to work on"(Chapman's Edition, 1970, P.10). Jane's knowledge about these families is, in no way shallow. It is rich in variation and contrasts.…

  19. IPUMS: Detailed global data on population characteristics

    Science.gov (United States)

    Kugler, T.

    2017-12-01

    Many new and exciting sources of data on human population distributions based on remote sensing, mobile technology, and other mechanisms are becoming available. These new data sources often provide fine scale spatial and/or temporal resolution. However, they typically focus on the location of population, with little or no information on population characteristics. The large and growing collection of data available through the IPUMS family of products complements datasets that provide spatial and temporal detail but little attribute detail by providing the full depth of characteristics covered by population censuses, including demographic, household structure, economic, employment, education, and housing characteristics. IPUMS International provides census microdata for 85 countries. Microdata provide the responses to every census question for each individual in a sample of households. Microdata identify the sub-national geographic unit in which a household is located, but for confidentiality reasons, identified units must include a minimum population, typically 20,000 people. Small-area aggregate data often describe much smaller geographic units, enabling study of detailed spatial patterns of population characteristics. However the structure of aggregate data tables is highly heterogeneous across countries, census years, and even topics within a given census, making these data difficult to work with in any systematic way. A recently funded project will assemble small-area aggregate population and agricultural census data published by national statistical offices. Through preliminary work collecting and cataloging over 10,000 tables, we have identified a small number of structural families that can be used to organize the many different structures. These structural families will form the basis for software tools to document and standardize the tables for ingest into a common database. Both the microdata and aggregate data are made available through IPUMS Terra

  20. Combined preliminary–detailed design of wind turbines

    Directory of Open Access Journals (Sweden)

    P. Bortolotti

    2016-05-01

    Full Text Available This paper is concerned with the holistic optimization of wind turbines. A multi-disciplinary optimization procedure is presented that marries the overall sizing of the machine in terms of rotor diameter and tower height (often termed “preliminary design” with the detailed sizing of its aerodynamic and structural components. The proposed combined preliminary–detailed approach sizes the overall machine while taking into full account the subtle and complicated couplings that arise due to the mutual effects of aerodynamic and structural choices. Since controls play a central role in dictating performance and loads, control laws are also updated accordingly during optimization. As part of the approach, rotor and tower are sized simultaneously, even in this case capturing the mutual effects of one component over the other due to the tip clearance constraint. The procedure, here driven by detailed models of the cost of energy, results in a complete aero-structural design of the machine, including its associated control laws. The proposed methods are tested on the redesign of two wind turbines, a 2.2 MW onshore machine and a large 10 MW offshore one. In both cases, the optimization leads to significant changes with respect to the initial baseline configurations, with noticeable reductions in the cost of energy. The novel procedures are also exercised on the design of low-induction rotors for both considered wind turbines, showing that they are typically not competitive with conventional high-efficiency rotors.

  1. Depression, anxiety and quality of life in suicide survivors: a comparison of close and distant relationships.

    Science.gov (United States)

    Mitchell, Ann M; Sakraida, Teresa J; Kim, Yookyung; Bullian, Leann; Chiappetta, Laurel

    2009-02-01

    The study's purpose was to describe and compare depression, anxiety, and quality of life, by degree of relationship, between closely related and distantly related survivors (persons close to the suicide victim, or "suicide survivors"; N = 60) during the acute phase of bereavement (within 1 month of the death). The close relationship category included spouses, parents, children, and siblings, whereas the distant relationship category included in-laws, aunts/uncles, and nieces/nephews. Analysis of covariance examined differences between the two groups on the symptom measures. Results indicate that, after controlling for age and gender effects, closely related survivors had significantly higher mean levels of depression and anxiety and had lower levels of mental health quality of life. There were no statistically significant differences on the physical health quality of life subscale.

  2. Talent in autism: hyper-systemizing, hyper-attention to detail and sensory hypersensitivity.

    Science.gov (United States)

    Baron-Cohen, Simon; Ashwin, Emma; Ashwin, Chris; Tavassoli, Teresa; Chakrabarti, Bhismadev

    2009-05-27

    We argue that hyper-systemizing predisposes individuals to show talent, and review evidence that hyper-systemizing is part of the cognitive style of people with autism spectrum conditions (ASC). We then clarify the hyper-systemizing theory, contrasting it to the weak central coherence (WCC) and executive dysfunction (ED) theories. The ED theory has difficulty explaining the existence of talent in ASC. While both hyper-systemizing and WCC theories postulate excellent attention to detail, by itself excellent attention to detail will not produce talent. By contrast, the hyper-systemizing theory argues that the excellent attention to detail is directed towards detecting 'if p, then q' rules (or [input-operation-output] reasoning). Such law-based pattern recognition systems can produce talent in systemizable domains. Finally, we argue that the excellent attention to detail in ASC is itself a consequence of sensory hypersensitivity. We review an experiment from our laboratory demonstrating sensory hypersensitivity detection thresholds in vision. We conclude that the origins of the association between autism and talent begin at the sensory level, include excellent attention to detail and end with hyper-systemizing.

  3. Detailed clinical models: a review.

    Science.gov (United States)

    Goossen, William; Goossen-Baremans, Anneke; van der Zel, Michael

    2010-12-01

    Due to the increasing use of electronic patient records and other health care information technology, we see an increase in requests to utilize these data. A highly level of standardization is required during the gathering of these data in the clinical context in order to use it for analyses. Detailed Clinical Models (DCM) have been created toward this purpose and several initiatives have been implemented in various parts of the world to create standardized models. This paper presents a review of DCM. Two types of analyses are presented; one comparing DCM against health care information architectures and a second bottom up approach from concept analysis to representation. In addition core parts of the draft ISO standard 13972 on DCM are used such as clinician involvement, data element specification, modeling, meta information, and repository and governance. SIX INITIATIVES WERE SELECTED: Intermountain Healthcare, 13606/OpenEHR Archetypes, Clinical Templates, Clinical Contents Models, Health Level 7 templates, and Dutch Detailed Clinical Models. Each model selected was reviewed for their overall development, involvement of clinicians, use of data types, code bindings, expressing semantics, modeling, meta information, use of repository and governance. Using both a top down and bottom up approach to comparison reveals many commonalties and differences between initiatives. Important differences include the use of or lack of a reference model and expressiveness of models. Applying clinical data element standards facilitates the use of conceptual DCM models in different technical representations.

  4. Devil in the details? Developmental dyslexia and visual long-term memory for details.

    Science.gov (United States)

    Huestegge, Lynn; Rohrßen, Julia; van Ermingen-Marbach, Muna; Pape-Neumann, Julia; Heim, Stefan

    2014-01-01

    Cognitive theories on causes of developmental dyslexia can be divided into language-specific and general accounts. While the former assume that words are special in that associated processing problems are rooted in language-related cognition (e.g., phonology) deficits, the latter propose that dyslexia is rather rooted in a general impairment of cognitive (e.g., visual and/or auditory) processing streams. In the present study, we examined to what extent dyslexia (typically characterized by poor orthographic representations) may be associated with a general deficit in visual long-term memory (LTM) for details. We compared object- and detail-related visual LTM performance (and phonological skills) between dyslexic primary school children and IQ-, age-, and gender-matched controls. The results revealed that while the overall amount of LTM errors was comparable between groups, dyslexic children exhibited a greater portion of detail-related errors. The results suggest that not only phonological, but also general visual resolution deficits in LTM may play an important role in developmental dyslexia.

  5. Progress report on first year of WP5.2. Including detailed description of planned research for WP 5.2

    Energy Technology Data Exchange (ETDEWEB)

    Ellemers, N.; Van Dijk, E.; Terwel, B.; De Vries, G. [Leiden University, Leiden (Netherlands)

    2010-10-15

    This document contains the progress report on the first half year of the CATO-2 WP5.2 PhD project 'Framing effects in communication about CCS'. In the first few months a literature study has been conducted, both on (factors that influence) public perceptions and acceptance of CCS, and on framing. In the last two month, a first study was designed. This study consists of an experiment designed to examine how framing a company's involvement in CCS in terms of economic benefits and/or CSR of the organization affects the corporate image, trust, and perceived 'greenwashing' (deceit). Furthermore, this experiment serves to test the quality of newly developed questionnaires to measure these variables. In addition, this document contains a detailed description of the research planned for WP5.2 written by senior (CATO-2) researchers from January 2010 on. The objective of the research planned for WP5.2 is to examine whether framing of communications by an organization can improve the perceived credibility and trustworthiness of the organization and the information provided. This issue will be examined by a combination of experimental studies and a survey-type study.

  6. Model for safety reports including descriptive examples

    International Nuclear Information System (INIS)

    1995-12-01

    Several safety reports will be produced in the process of planning and constructing the system for disposal of high-level radioactive waste in Sweden. The present report gives a model, with detailed examples, of how these reports should be organized and what steps they should include. In the near future safety reports will deal with the encapsulation plant and the repository. Later reports will treat operation of the handling systems and the repository

  7. Devil in the Details? Developmental Dyslexia and Visual Long-Term Memory for Details

    Directory of Open Access Journals (Sweden)

    Lynn eHuestegge

    2014-07-01

    Full Text Available Cognitive theories on causes of developmental dyslexia can be divided into language-specific and general accounts. While the former assume that words are special in that associated processing problems are rooted in language-related cognition (e.g., phonology deficits, the latter propose that dyslexia is rather rooted in a general impairment of cognitive (e.g., visual and/or auditory processing streams. In the present study, we examined to what extent dyslexia (typically characterized by poor orthographic representations may be associated with a general deficit in visual long-term memory for details. We compared object- and detail-related visual long-term memory performance (and phonological skills between dyslexic primary school children and IQ-, age- and gender-matched controls. The results revealed that while the overall amount of long-term memory errors was comparable between groups, dyslexic children exhibited a greater portion of detail-related errors. The results suggest that not only phonological, but also general visual resolution deficits in long-term memory may play an important role in developmental dyslexia.

  8. Association Between Academic Medical Center Pharmaceutical Detailing Policies and Physician Prescribing.

    Science.gov (United States)

    Larkin, Ian; Ang, Desmond; Steinhart, Jonathan; Chao, Matthew; Patterson, Mark; Sah, Sunita; Wu, Tina; Schoenbaum, Michael; Hutchins, David; Brennan, Troyen; Loewenstein, George

    2017-05-02

    In an effort to regulate physician conflicts of interest, some US academic medical centers (AMCs) enacted policies restricting pharmaceutical representative sales visits to physicians (known as detailing) between 2006 and 2012. Little is known about the effect of these policies on physician prescribing. To analyze the association between detailing policies enacted at AMCs and physician prescribing of actively detailed and not detailed drugs. The study used a difference-in-differences multivariable regression analysis to compare changes in prescribing by physicians before and after implementation of detailing policies at AMCs in 5 states (California, Illinois, Massachusetts, Pennsylvania, and New York) that made up the intervention group with changes in prescribing by a matched control group of similar physicians not subject to a detailing policy. Academic medical center implementation of policies regulating pharmaceutical salesperson visits to attending physicians. The monthly within-drug class market share of prescriptions written by an individual physician for detailed and nondetailed drugs in 8 drug classes (lipid-lowering drugs, gastroesophageal reflux disease drugs, diabetes drugs, antihypertensive drugs, hypnotic drugs approved for the treatment of insomnia [sleep aids], attention-deficit/hyperactivity disorder drugs, antidepressant drugs, and antipsychotic drugs) comparing the 10- to 36-month period before implementation of the detailing policies with the 12- to 36-month period after implementation, depending on data availability. The analysis included 16 121 483 prescriptions written between January 2006 and June 2012 by 2126 attending physicians at the 19 intervention group AMCs and by 24 593 matched control group physicians. The sample mean market share at the physician-drug-month level for detailed and nondetailed drugs prior to enactment of policies was 19.3% and 14.2%, respectively. Exposure to an AMC detailing policy was associated with a

  9. Template Assembly for Detailed Urban Reconstruction

    KAUST Repository

    Nan, Liangliang

    2015-05-04

    We propose a new framework to reconstruct building details by automatically assembling 3D templates on coarse textured building models. In a preprocessing step, we generate an initial coarse model to approximate a point cloud computed using Structure from Motion and Multi View Stereo, and we model a set of 3D templates of facade details. Next, we optimize the initial coarse model to enforce consistency between geometry and appearance (texture images). Then, building details are reconstructed by assembling templates on the textured faces of the coarse model. The 3D templates are automatically chosen and located by our optimization-based template assembly algorithm that balances image matching and structural regularity. In the results, we demonstrate how our framework can enrich the details of coarse models using various data sets.

  10. Evaluating the roles of detailed endocardial structures on right ventricular haemodynamics by means of CFD simulations.

    Science.gov (United States)

    Sacco, Federica; Paun, Bruno; Lehmkuhl, Oriol; Iles, Tinen L; Iaizzo, Paul A; Houzeaux, Guillaume; Vázquez, Mariano; Butakoff, Constantine; Aguado-Sierra, Jazmin

    2018-06-11

    Computational modelling plays an important role in right ventricular (RV) haemodynamic analysis. However, current approaches employ smoothed ventricular anatomies. The aim of this study is to characterise RV haemodynamics including detailed endocardial structures like trabeculae, moderator band and papillary muscles (PMs). Four paired detailed and smoothed RV endocardium models (two male and two female) were reconstructed from ex-vivo human hearts high-resolution magnetic resonance images (MRI). Detailed models include structures with ≥1 mm 2 cross-sectional area. Haemodynamic characterisation was done by computational fluid dynamics (CFD) simulations with steady and transient inflows, using high performance computing (HPC). The differences between the flows in smoothed and detailed models were assessed using Q-criterion for vorticity quantification, the pressure drop between inlet and outlet, and the wall shear stress (WSS). Results demonstrated that detailed endocardial structures increase the degree of intra-ventricular pressure drop, decrease the WSS and disrupt the dominant vortex creating secondary small vortices. Increasingly turbulent blood flow was observed in the detailed RVs. Female RVs were less trabeculated and presented lower pressure drops than the males. In conclusion, neglecting endocardial structures in RV haemodynamic models may lead to inaccurate conclusions about the pressures, stresses, and blood flow behaviour in the cavity. This article is protected by copyright. All rights reserved.

  11. Template Assembly for Detailed Urban Reconstruction

    KAUST Repository

    Nan, Liangliang; Wonka, Peter; Ghanem, Bernard; Jiang, Caigui

    2015-01-01

    Structure from Motion and Multi View Stereo, and we model a set of 3D templates of facade details. Next, we optimize the initial coarse model to enforce consistency between geometry and appearance (texture images). Then, building details are reconstructed

  12. Detail in architecture: Between arts & crafts

    Science.gov (United States)

    Dulencin, Juraj

    2016-06-01

    Architectural detail represents an important part of architecture. Not only can it be used as an identifier of a specific building but at the same time enhances the experience of the realized project. Within it lie the signs of a great architect and clues to understanding his or her way of thinking. It is therefore the central topic of a seminar offered to architecture students at the Brno University of Technology. During the course of the semester-long class the students acquaint themselves with atypical architectural details of domestic and international architects by learning to read them, understand them and subsequently draw them by creating architectural blueprints. In other words, by general analysis of a detail the students learn theoretical thinking of its architect who, depending on the nature of the design, had to incorporate a variety of techniques and crafts. Students apply this analytical part to their own architectural detail design. The methodology of the seminar consists of experiential learning by project management and is complemented by a series of lectures discussing a diversity of details as well as materials and technologies required to implement it. The architectural detail design is also part of students' bachelors thesis, therefore, the realistic nature of their blueprints can be verified in the production process of its physical counterpart. Based on their own documentation the students choose the most suitable manufacturing process whether it is supplied by a specific technology or a craftsman. Students actively participate in the production and correct their design proposals in real scale with the actual material. A student, as a future architect, stands somewhere between a client and an artisan, materializes his or her idea and adjusts the manufacturing process so that the final detail fulfills aesthetic consistency and is in harmony with its initial concept. One of the very important aspects of the design is its economic cost, an

  13. 78 FR 69669 - Intent To Conduct a Detailed Economic Impact Analysis

    Science.gov (United States)

    2013-11-20

    ... EXPORT-IMPORT BANK Intent To Conduct a Detailed Economic Impact Analysis This notice is to inform... guarantee, the value of the transaction, and the amount of new foreign production capacity are not included... date this notice appears in the Federal Register. James C. Cruse, Senior Vice President, Policy and...

  14. Technology-enabled academic detailing: computer-mediated education between pharmacists and physicians for evidence-based prescribing.

    Science.gov (United States)

    Ho, Kendall; Nguyen, Anne; Jarvis-Selinger, Sandra; Novak Lauscher, Helen; Cressman, Céline; Zibrik, Lindsay

    2013-09-01

    Academic detailing (AD) is the practice of specially trained pharmacists with detailed medication knowledge meeting with physicians to share best practices of prescribing. AD has demonstrated efficacy in positively influencing physicians' prescribing behavior. Nevertheless, a key challenge has been that physicians in rural and remote locations, or physicians who are time challenged, have limited ability to participate in face-to-face meetings with academic detailers, as these specially trained academic detailers are primarily urban-based and limited in numbers. To determine the feasibility of using information technologies to facilitate communication between academic detailers and physicians (known as Technology-Enabled Academic Detailing or TEAD) through a comparison to traditional face-to-face academic detailing (AD). Specifically, TEAD is compared to AD in terms of the ability to aid physicians in acquiring evidence-informed prescribing information on diabetes-related medications, measured in terms of time efficiency, satisfaction of both physicians and pharmacists, and quality of knowledge exchange. General Practitioner Physicians (n=105) and pharmacists (n=12) were recruited from across British Columbia. Pharmacists were trained to be academic detailers on diabetes medication usage. Physicians were assigned to one of four intervention groups to receive four academic detailing sessions from trained pharmacists. Intervention groups included: (1) AD only, (2) TEAD only, (3) TEAD crossed over to AD at midpoint, and (4) AD crossed over to TEAD at midpoint. Evaluation included physician-completed surveys before and after each session, pharmacist logs after each detailing session, interviews and focus groups with physicians and pharmacists at study completion, as well as a technical support log to record all phone calls and emails from physicians and pharmacists regarding any technical challenges during the TEAD sessions, or usage of the web portal. Because

  15. Academic detailing.

    Science.gov (United States)

    Shankar, P R; Jha, N; Piryani, R M; Bajracharya, O; Shrestha, R; Thapa, H S

    2010-01-01

    There are a number of sources available to prescribers to stay up to date about medicines. Prescribers in rural areas in developing countries however, may not able to access some of them. Interventions to improve prescribing can be educational, managerial, and regulatory or use a mix of strategies. Detailing by the pharmaceutical industry is widespread. Academic detailing (AD) has been classically seen as a form of continuing medical education in which a trained health professional such as a physician or pharmacist visits physicians in their offices to provide evidence-based information. Face-to-face sessions, preferably on an individual basis, clear educational and behavioural objectives, establishing credibility with respect to objectivity, stimulating physician interaction, use of concise graphic educational materials, highlighting key messages, and when possible, providing positive reinforcement of improved practices in follow-up visits can increase success of AD initiatives. AD is common in developed countries and certain examples have been cited in this review. In developing countries the authors have come across reports of AD in Pakistan, Sudan, Argentina and Uruguay, Bihar state in India, Zambia, Cuba, Indonesia and Mexico. AD had a consistent, small but potentially significant impact on prescribing practices. AD has much less resources at its command compared to the efforts by the industry. Steps have to be taken to formally start AD in Nepal and there may be specific hindering factors similar to those in other developing nations.

  16. Increased interestingness of extraneous details in a multimedia science presentation leads to decreased learning.

    Science.gov (United States)

    Mayer, Richard E; Griffith, Emily; Jurkowitz, Ilana T N; Rothman, Daniel

    2008-12-01

    In Experiment 1, students received an illustrated booklet, PowerPoint presentation, or narrated animation that explained 6 steps in how a cold virus infects the human body. The material included 6 high-interest details mainly about the role of viruses in sex or death (high group) or 6 low-interest details consisting of facts and health tips about viruses (low group). The low group outperformed the high group across all 3 media on a subsequent test of problem-solving transfer (d = .80) but not retention (d = .05). In Experiment 2, students who studied a PowerPoint lesson explaining the steps in how digestion works performed better on a problem-solving transfer test if the lesson contained 7 low-interest details rather than 7 high-interest details (d = .86), but the groups did not differ on retention (d = .26). In both experiments, as the interestingness of details was increased, student understanding decreased (as measured by transfer). Results are consistent with a cognitive theory of multimedia learning, in which highly interesting details sap processing capacity away from deeper cognitive processing of the core material during learning. PsycINFO Database Record (c) 2008 APA, all rights reserved.

  17. Detailed balance theory of excitonic and bulk heterojunction solar cells

    Science.gov (United States)

    Kirchartz, Thomas; Mattheis, Julian; Rau, Uwe

    2008-12-01

    A generalized solar cell model for excitonic and classical bipolar solar cells describes the combined transport and interaction of electrons, holes, and excitons in accordance with the principle of detailed balance. Conventional inorganic solar cells, single-phase organic solar cells and bulk heterojunction solar cells, i.e., nanoscale mixtures of two organic materials, are special cases of this model. For high mobilities, the compatibility with the principle of detailed balance ensures that our model reproduces the Shockley-Queisser limit irrespective of how the energy transport is achieved. For less ideal devices distinct differences become visible between devices that are described by linear differential equations and those with nonlinear effects, such as a voltage-dependent collection in bipolar p-i-n -type devices. These differences in current-voltage characteristics are also decisive for the validity of the reciprocity theorem between photovoltaic quantum efficiency and electroluminescent emission. Finally, we discuss the effect of band offset at the heterointerface in a bulk heterojunction cell and the effect of the average distances between these heterointerfaces on the performance of a solar cell in order to show how our detailed balance model includes also these empirically important quantities.

  18. Comparing Epileptiform Behavior of Mesoscale Detailed Models and Population Models of Neocortex

    NARCIS (Netherlands)

    Visser, S.; Meijer, Hil Gaétan Ellart; Lee, Hyong C.; van Drongelen, Wim; van Putten, Michel Johannes Antonius Maria; van Gils, Stephanus A.

    2010-01-01

    Two models of the neocortex are developed to study normal and pathologic neuronal activity. One model contains a detailed description of a neocortical microcolumn represented by 656 neurons, including superficial and deep pyramidal cells, four types of inhibitory neurons, and realistic synaptic

  19. Detailed inelastic analysis of an LMFBR pipeline

    International Nuclear Information System (INIS)

    Hibbitt, H.D.; Leung, E.K.; Ohalla, A.K.

    1982-01-01

    The paper describes detailed inelastic analyses of a large diameter, thin walled pipeline configuration typical of liquid metal cooled reactor primary piping, subject to thermal shock, with intermediate periods of creep hold time. Three such analyses are compared. Two of these analyses are performed with recently developed elements based on a combination of Fourier and polynomial interpolation to describe the deformation of the pipe. One of these two analyses includes continuous deformation of the pipe wall between each elbow and the adjacent straight pipe segments, while the other neglects such ''end effects'' on the elbow deformation. The third analysis is based on a modified axi-symmetric shell element for modeling the elbows (neglecting and effects). The results thus provide an assessment of the relative cost and importance of including consideration of end effects in modeling a realistic piping system, as well as providing a similar comparison between the two basic deforming section pipe models (Fourier/polynomial versus modified axi-symmetric shells)

  20. Detailed Soils 24K

    Data.gov (United States)

    Kansas Data Access and Support Center — This data set is a digital soil survey and is the most detailed level of soil geographic data developed by the National Cooperative Soil Survey. The information was...

  1. Detailed Facility Report Data Dictionary | ECHO | US EPA

    Science.gov (United States)

    The Detailed Facility Report Data Dictionary provides users with a list of the variables and definitions that have been incorporated into the Detailed Facility Report. The Detailed Facility Report provides a concise enforcement and compliance history for a facility.

  2. Broken detailed balance and non-equilibrium dynamics in living systems: a review

    Science.gov (United States)

    Gnesotto, F. S.; Mura, F.; Gladrow, J.; Broedersz, C. P.

    2018-06-01

    Living systems operate far from thermodynamic equilibrium. Enzymatic activity can induce broken detailed balance at the molecular scale. This molecular scale breaking of detailed balance is crucial to achieve biological functions such as high-fidelity transcription and translation, sensing, adaptation, biochemical patterning, and force generation. While biological systems such as motor enzymes violate detailed balance at the molecular scale, it remains unclear how non-equilibrium dynamics manifests at the mesoscale in systems that are driven through the collective activity of many motors. Indeed, in several cellular systems the presence of non-equilibrium dynamics is not always evident at large scales. For example, in the cytoskeleton or in chromosomes one can observe stationary stochastic processes that appear at first glance thermally driven. This raises the question how non-equilibrium fluctuations can be discerned from thermal noise. We discuss approaches that have recently been developed to address this question, including methods based on measuring the extent to which the system violates the fluctuation-dissipation theorem. We also review applications of this approach to reconstituted cytoskeletal networks, the cytoplasm of living cells, and cell membranes. Furthermore, we discuss a more recent approach to detect actively driven dynamics, which is based on inferring broken detailed balance. This constitutes a non-invasive method that uses time-lapse microscopy data, and can be applied to a broad range of systems in cells and tissue. We discuss the ideas underlying this method and its application to several examples including flagella, primary cilia, and cytoskeletal networks. Finally, we briefly discuss recent developments in stochastic thermodynamics and non-equilibrium statistical mechanics, which offer new perspectives to understand the physics of living systems.

  3. Broken detailed balance and non-equilibrium dynamics in living systems: a review.

    Science.gov (United States)

    Gnesotto, F S; Mura, F; Gladrow, J; Broedersz, C P

    2018-03-05

    Living systems operate far from thermodynamic equilibrium. Enzymatic activity can induce broken detailed balance at the molecular scale. This molecular scale breaking of detailed balance is crucial to achieve biological functions such as high-fidelity transcription and translation, sensing, adaptation, biochemical patterning, and force generation. While biological systems such as motor enzymes violate detailed balance at the molecular scale, it remains unclear how non-equilibrium dynamics manifests at the mesoscale in systems that are driven through the collective activity of many motors. Indeed, in several cellular systems the presence of non-equilibrium dynamics is not always evident at large scales. For example, in the cytoskeleton or in chromosomes one can observe stationary stochastic processes that appear at first glance thermally driven. This raises the question how non-equilibrium fluctuations can be discerned from thermal noise. We discuss approaches that have recently been developed to address this question, including methods based on measuring the extent to which the system violates the fluctuation-dissipation theorem. We also review applications of this approach to reconstituted cytoskeletal networks, the cytoplasm of living cells, and cell membranes. Furthermore, we discuss a more recent approach to detect actively driven dynamics, which is based on inferring broken detailed balance. This constitutes a non-invasive method that uses time-lapse microscopy data, and can be applied to a broad range of systems in cells and tissue. We discuss the ideas underlying this method and its application to several examples including flagella, primary cilia, and cytoskeletal networks. Finally, we briefly discuss recent developments in stochastic thermodynamics and non-equilibrium statistical mechanics, which offer new perspectives to understand the physics of living systems.

  4. Recovering and Preventing Loss of Detailed Memory: Differential Rates of Forgetting for Detail Types in Episodic Memory

    Science.gov (United States)

    Sekeres, Melanie J.; Bonasia, Kyra; St-Laurent, Marie; Pishdadian, Sara; Winocur, Gordon; Grady, Cheryl; Moscovitch, Morris

    2016-01-01

    Episodic memories undergo qualitative changes with time, but little is known about how different aspects of memory are affected. Different types of information in a memory, such as perceptual detail, and central themes, may be lost at different rates. In patients with medial temporal lobe damage, memory for perceptual details is severely impaired,…

  5. Data on the descriptive overview and the quality assessment details of 12 qualitative research papers.

    Science.gov (United States)

    Barnabishvili, Maia; Ulrichs, Timo; Waldherr, Ruth

    2016-09-01

    This data article presents the supplementary material for the review paper "Role of acceptability barriers in delayed diagnosis of Tuberculosis: Literature review from high burden countries" (Barnabishvili et al., in press) [1]. General overview of 12 qualitative papers, including the details about authors, years of publication, data source locations, study objectives, overview of methods, study population characteristics, as well as the details of intervention and the outcome parameters of the papers are summarized in the first two tables included to the article. Quality assessment process of the methodological strength of 12 papers and the results of the critical appraisal are further described and summarized in the second part of the article.

  6. Making detailed predictions makes (some) predictions worse

    Science.gov (United States)

    Kelly, Theresa F.

    In this paper, we investigate whether making detailed predictions about an event makes other predictions worse. Across 19 experiments, 10,895 participants, and 415,960 predictions about 724 professional sports games, we find that people who made detailed predictions about sporting events (e.g., how many hits each baseball team would get) made worse predictions about more general outcomes (e.g., which team would win). We rule out that this effect is caused by inattention or fatigue, thinking too hard, or a differential reliance on holistic information about the teams. Instead, we find that thinking about game-relevant details before predicting winning teams causes people to give less weight to predictive information, presumably because predicting details makes information that is relatively useless for predicting the winning team more readily accessible in memory and therefore incorporated into forecasts. Furthermore, we show that this differential use of information can be used to predict what kinds of games will and will not be susceptible to the negative effect of making detailed predictions.

  7. Data on the descriptive overview and the quality assessment details of 12 qualitative research papers

    OpenAIRE

    Barnabishvili, Maia; Ulrichs, Timo; Waldherr, Ruth

    2016-01-01

    This data article presents the supplementary material for the review paper “Role of acceptability barriers in delayed diagnosis of Tuberculosis: Literature review from high burden countries” (Barnabishvili et al., in press) [1]. General overview of 12 qualitative papers, including the details about authors, years of publication, data source locations, study objectives, overview of methods, study population characteristics, as well as the details of intervention and the outcome parameters of t...

  8. 5 experiments in 5 minutes

    Science.gov (United States)

    Hut, Rolf

    2015-04-01

    Show, don't tell. When kids ask about your research, show, don't tell. We, the ambassadors of science, shouldn't be boring our nieces and nephews at family dinners with parameter distributions, we should make them excited about science. Getting people excited: show, don't tell. In 5 minutes, I will perform 5 experiments that anyone can do using everyday household items to get kids interested in science. Bring safety glasses.

  9. Crowdsourcing detailed flood data

    Science.gov (United States)

    Walliman, Nicholas; Ogden, Ray; Amouzad*, Shahrzhad

    2015-04-01

    Over the last decade the average annual loss across the European Union due to flooding has been 4.5bn Euros, but increasingly intense rainfall, as well as population growth, urbanisation and the rising costs of asset replacements, may see this rise to 23bn Euros a year by 2050. Equally disturbing are the profound social costs to individuals, families and communities which in addition to loss of lives include: loss of livelihoods, decreased purchasing and production power, relocation and migration, adverse psychosocial effects, and hindrance of economic growth and development. Flood prediction, management and defence strategies rely on the availability of accurate information and flood modelling. Whilst automated data gathering (by measurement and satellite) of the extent of flooding is already advanced it is least reliable in urban and physically complex geographies where often the need for precise estimation is most acute. Crowdsourced data of actual flood events is a potentially critical component of this allowing improved accuracy in situations and identifying the effects of local landscape and topography where the height of a simple kerb, or discontinuity in a boundary wall can have profound importance. Mobile 'App' based data acquisition using crowdsourcing in critical areas can combine camera records with GPS positional data and time, as well as descriptive data relating to the event. This will automatically produce a dataset, managed in ArcView GIS, with the potential for follow up calls to get more information through structured scripts for each strand. Through this local residents can provide highly detailed information that can be reflected in sophisticated flood protection models and be core to framing urban resilience strategies and optimising the effectiveness of investment. This paper will describe this pioneering approach that will develop flood event data in support of systems that will advance existing approaches such as developed in the in the UK

  10. Calibrating Detailed Chemical Analysis of M dwarfs

    Science.gov (United States)

    Veyette, Mark; Muirhead, Philip Steven; Mann, Andrew; Brewer, John; Allard, France; Homeier, Derek

    2018-01-01

    The ability to perform detailed chemical analysis of Sun-like F-, G-, and K-type stars is a powerful tool with many applications including studying the chemical evolution of the Galaxy, assessing membership in stellar kinematic groups, and constraining planet formation theories. Unfortunately, complications in modeling cooler stellar atmospheres has hindered similar analysis of M-dwarf stars. Large surveys of FGK abundances play an important role in developing methods to measure the compositions of M dwarfs by providing benchmark FGK stars that have widely-separated M dwarf companions. These systems allow us to empirically calibrate metallicity-sensitive features in M dwarf spectra. However, current methods to measure metallicity in M dwarfs from moderate-resolution spectra are limited to measuring overall metallicity and largely rely on astrophysical abundance correlations in stellar populations. In this talk, I will discuss how large, homogeneous catalogs of precise FGK abundances are crucial to advancing chemical analysis of M dwarfs beyond overall metallicity to direct measurements of individual elemental abundances. I will present a new method to analyze high-resolution, NIR spectra of M dwarfs that employs an empirical calibration of synthetic M dwarf spectra to infer effective temperature, Fe abundance, and Ti abundance. This work is a step toward detailed chemical analysis of M dwarfs at a similar precision achieved for FGK stars.

  11. Development process of muzzle flows including a gun-launched missile

    Directory of Open Access Journals (Sweden)

    Zhuo Changfei

    2015-04-01

    Full Text Available Numerical investigations on the launch process of a gun-launched missile from the muzzle of a cannon to the free-flight stage have been performed in this paper. The dynamic overlapped grids approach are applied to dealing with the problems of a moving gun-launched missile. The high-resolution upwind scheme (AUSMPW+ and the detailed reaction kinetics model are adopted to solve the chemical non-equilibrium Euler equations for dynamic grids. The development process and flow field structure of muzzle flows including a gun-launched missile are discussed in detail. This present numerical study confirms that complicated transient phenomena exist in the shortly launching stages when the gun-launched missile moves from the muzzle of a cannon to the free-flight stage. The propellant gas flows, the initial environmental ambient air flows and the moving missile mutually couple and interact. A complete structure of flow field is formed at the launching stages, including the blast wave, base shock, reflected shock, incident shock, shear layer, primary vortex ring and triple point.

  12. Investigating the Interaction of Graphic Organizers and Seductive Details: Can a Graphic Organizer Mitigate the Seductive-Details Effect?

    Science.gov (United States)

    Rowland-Bryant, Emily; Skinner, Christopher H.; Skinner, Amy L.; Saudargas, Richard; Robinson, Daniel H.; Kirk, Emily R.

    2009-01-01

    The interaction between seductive details (SD) and a graphic organizer (GO) was investigated. Undergraduate students (n = 207) read a target-material passage about Freud's psychosexual stages. Depending on condition, the participants also read a biographical paragraph (SD-only), viewed a graphic organizer that linked the seductive details to the…

  13. CMHC [Canada Mortgage and Housing Corporation] research project: Testing of air barrier construction details 2

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-31

    Air leakage control through the building envelope of wood framed houses is more important than ever. This is because owners expect better temperature control, higher indoor humidity in winter, low energy consumption and building durability. The leakage of air is controlled by the air barrier system. There are several new technologies to construct an air barrier system for the building envelope. These are the Poly Approach, the Air Drywall Approach (ADA) and the EASE system. The development of these systems was undertaken primarily by the building community without significant research and development. While it is believed that these methods improve airtightness it is not known if the improvement is marginal or significant. A study was conducted to determine actual performace of several different types of construction details for each of the different approaches. Each of these details was designed and constructed using one of the air barrier methods and tested in the laboratory. The test details included sill plate, the partition wall, the stair stringer, the electrical outlets, the bathtub detail, the plumbing stack detail, the metal chimney detail, the bathroom fan detail and the EASE wall system. The test results revealed that the Poly, ADA and EASE approaches reduce air leakage by a factor of six, if applied with a modest degree of workmanship. Further, certain Poly details are to be reconsidered because they lack adequate support against design wind load pressures. 37 figs., 12 tabs.

  14. 40 CFR 1039.205 - What must I include in my application?

    Science.gov (United States)

    2010-07-01

    ... exhaust emissions will be possible after engines are installed in equipment and placed in service. If this cannot be done by simply adding a 20-centimeter extension to the exhaust pipe, show how to sample exhaust.... Describe in detail all system components for controlling exhaust emissions, including all auxiliary...

  15. Key Features of Academic Detailing: Development of an Expert Consensus Using the Delphi Method.

    Science.gov (United States)

    Yeh, James S; Van Hoof, Thomas J; Fischer, Michael A

    2016-02-01

    Academic detailing is an outreach education technique that combines the direct social marketing traditionally used by pharmaceutical representatives with unbiased content summarizing the best evidence for a given clinical issue. Academic detailing is conducted with clinicians to encourage evidence-based practice in order to improve the quality of care and patient outcomes. The adoption of academic detailing has increased substantially since the original studies in the 1980s. However, the lack of standard agreement on its implementation makes the evaluation of academic detailing outcomes challenging. To identify consensus on the key elements of academic detailing among a group of experts with varying experiences in academic detailing. This study is based on an online survey of 20 experts with experience in academic detailing. We used the Delphi process, an iterative and systematic method of developing consensus within a group. We conducted 3 rounds of online surveys, which addressed 72 individual items derived from a previous literature review of 5 features of academic detailing, including (1) content, (2) communication process, (3) clinicians targeted, (4) change agents delivering intervention, and (5) context for intervention. Nonrespondents were removed from later rounds of the surveys. For most questions, a 4-point ordinal scale was used for responses. We defined consensus agreement as 70% of respondents for a single rating category or 80% for dichotomized ratings. The overall survey response rate was 95% (54 of 57 surveys) and nearly 92% consensus agreement on the survey items (66 of 72 items) by the end of the Delphi exercise. The experts' responses suggested that (1) focused clinician education offering support for clinical decision-making is a key component of academic detailing, (2) detailing messages need to be tailored and provide feasible strategies and solutions to challenging cases, and (3) academic detailers need to develop specific skill sets

  16. Kinetic energy budget details

    Indian Academy of Sciences (India)

    Abstract. This paper presents the detailed turbulent kinetic energy budget and higher order statistics of flow behind a surface-mounted rib with and without superimposed acoustic excitation. Pattern recognition technique is used to determine the large-scale structure magnitude. It is observed that most of the turbulence ...

  17. A new debate for Turkish physicians: e-detailing.

    Science.gov (United States)

    Ventura, Keti; Baybars, Miray; Dedeoglu, Ayla Ozhan

    2012-01-01

    The study presents an empirical analysis of the attitudes of Turkish physicians towards e-detailing practices compared to face-to-face detailing. The findings reveal that although physicians have positive attitudes toward e-detailing, on some points they are still undecided and/or have doubts. The structural model revealed that affect, convenience, and informative content influence their attitude in a positive manner, whereas the personal interaction was found to be a negative factor. Physicians' age and frequency of calls received from representatives are moderators. The present study can be seen as an addition to pharmaceutical marketing, an underresearched study field in Turkey, and e-detailing particularly.

  18. 40 CFR 1051.205 - What must I include in my application?

    Science.gov (United States)

    2010-07-01

    ... placed in service. If this cannot be done by simply adding a 20-centimeter extension to the exhaust pipe... describe in detail all system components for controlling exhaust emissions, including all auxiliary... requirements of § 1051.135. (l) Identify the exhaust emission standards or FELs to which you are certifying...

  19. Visual Memory : The Price of Encoding Details

    NARCIS (Netherlands)

    Nieuwenstein, Mark; Kromm, Maria

    2017-01-01

    Studies on visual long-term memory have shown that we have a tremendous capacity for remembering pictures of objects, even at a highly detailed level. What remains unclear, however, is whether encoding objects at such a detailed level comes at any cost. In the current study, we examined how the

  20. Dynamic model of a micro-tubular solid oxide fuel cell stack including an integrated cooling system

    Science.gov (United States)

    Hering, Martin; Brouwer, Jacob; Winkler, Wolfgang

    2017-02-01

    A novel dynamic micro-tubular solid oxide fuel cell (MT-SOFC) and stack model including an integrated cooling system is developed using a quasi three-dimensional, spatially resolved, transient thermodynamic, physical and electrochemical model that accounts for the complex geometrical relations between the cells and cooling-tubes. The modeling approach includes a simplified tubular geometry and stack design including an integrated cooling structure, detailed pressure drop and gas property calculations, the electrical and physical constraints of the stack design that determine the current, as well as control strategies for the temperature. Moreover, an advanced heat transfer balance with detailed radiative heat transfer between the cells and the integrated cooling-tubes, convective heat transfer between the gas flows and the surrounding structures and conductive heat transfer between the solid structures inside of the stack, is included. The detailed model can be used as a design basis for the novel MT-SOFC stack assembly including an integrated cooling system, as well as for the development of a dynamic system control strategy. The evaluated best-case design achieves very high electrical efficiency between around 75 and 55% in the entire power density range between 50 and 550 mW /cm2 due to the novel stack design comprising an integrated cooling structure.

  1. A structurally detailed finite element human head model for simulation of transcranial magnetic stimulation.

    Science.gov (United States)

    Chen, Ming; Mogul, David Jeffery

    2009-04-30

    Computational studies of the head utilizing finite element models (FEMs) have been used to investigate a wide variety of brain-electromagnetic (EM) field interaction phenomena including magnetic stimulation of the head using transcranial magnetic stimulation (TMS), direct electric stimulation of the brain for electroconvulsive therapy, and electroencephalography source localization. However, no human head model of sufficient complexity for studying the biophysics under these circumstances has been developed which utilizes structures at both the regional and cellular levels and provides well-defined smooth boundaries between tissues of different conductivities and orientations. The main barrier for building such accurate head models is the complex modeling procedures that include 3D object reconstruction and optimized meshing. In this study, a structurally detailed finite element model of the human head was generated that includes details to the level of cerebral gyri and sulci by combining computed tomography and magnetic resonance images. Furthermore, cortical columns that contain conductive processes of pyramidal neurons traversing the neocortical layers were included in the head model thus providing structure at or near the cellular level. These refinements provide a much more realistic model to investigate the effects of TMS on brain electrophysiology in the neocortex.

  2. Three Latin Phonological Details

    DEFF Research Database (Denmark)

    Olsen, Birgit Anette

    2006-01-01

    The present paper deals with three minor details of Latin phonology: 1) the development of the initial sequence *u¿l¿-, where it is suggested that an apparent vacillation between ul- and vol-/vul- represents sandhi variants going back to the proto-language, 2) the adjectives ama¯rus ‘bitter' and ...

  3. Memory for details with self-referencing.

    Science.gov (United States)

    Serbun, Sarah J; Shih, Joanne Y; Gutchess, Angela H

    2011-11-01

    Self-referencing benefits item memory, but little is known about the ways in which referencing the self affects memory for details. Experiment 1 assessed whether the effects of self-referencing operate only at the item, or general, level or whether they also enhance memory for specific visual details of objects. Participants incidentally encoded objects by making judgements in reference to the self, a close other (one's mother), or a familiar other (Bill Clinton). Results indicate that referencing the self or a close other enhances both specific and general memory. Experiments 2 and 3 assessed verbal memory for source in a task that relied on distinguishing between different mental operations (internal sources). The results indicate that self-referencing disproportionately enhances source memory, relative to conditions referencing other people, semantic, or perceptual information. We conclude that self-referencing not only enhances specific memory for both visual and verbal information, but can also disproportionately improve memory for specific internal source details.

  4. Detailed NMR, Including 1,1-ADEQUATE, and Anticancer Studies of Compounds from the Echinoderm Colobometra perspinosa

    Directory of Open Access Journals (Sweden)

    Catherine H. Liptrot

    2009-11-01

    Full Text Available From the dichloromethane/methanol extract of the crinoid Colobometra perspinosa, collected south east of Richards Island (Bedara, Family Islands, Central Great Barrier Reef, Australia, 3-(1'-hydroxypropyl-1,6,8-trihydroxy-9,10-anthraquinone [one of the two stereoisomers of rhodoptilometrin, (1], 3-propyl-1,6,8-trihydroxy-9,10-anthraquinone (3, 2-[(phenylacetylamino]ethanesulfonic acid (4, and 4-hydroxybutanoic acid (5 were isolated. Comparison of 1H- and 13C-NMR data for rhodoptilometrin (1 with those reported in the literature showed significant differences for some resonances associated with rings A and C. In an attempt to provide accurately assigned 1H- and 13C-NMR data, as well as to confirm the structure of 1, a thorough NMR investigation of this compound was undertaken. Measurements included: concentration dependent 13C, 1D selective NOE, HSQC, HMBC and 1,1-ADEQUATE. The NMR data for 4 and 5 are reported here for the first time, as is their occurrence from the marine environment. The in vitro anticancer activity of the original extract was found to be associated with 1, 3 and 5.

  5. Older adults report moderately more detailed autobiographical memories.

    Science.gov (United States)

    Gardner, Robert S; Mainetti, Matteo; Ascoli, Giorgio A

    2015-01-01

    Autobiographical memory (AM) is an essential component of the human mind. Although the([A-z]+) amount and types of subjective detail (content) that compose AMs constitute important dimensions of recall, age-related changes in memory content are not well characterized. Previously, we introduced the Cue-Recalled Autobiographical Memory test (CRAM; see http://cramtest.info), an instrument that collects subjective reports of AM content, and applied it to college-aged subjects. CRAM elicits AMs using naturalistic word-cues. Subsequently, subjects date each cued AM to a life period and count the number of remembered details from specified categories (features), e.g., temporal detail, spatial detail, persons, objects, and emotions. The current work applies CRAM to a broad range of individuals (18-78 years old) to quantify the effects of age on AM content. Subject age showed a moderately positive effect on AM content: older compared with younger adults reported ∼16% more details (∼25 vs. ∼21 in typical AMs). This age-related increase in memory content was similarly observed for remote and recent AMs, although content declined with the age of the event among all subjects. In general, the distribution of details across features was largely consistent among younger and older adults. However, certain types of details, i.e., those related to objects and sequences of events, contributed more to the age effect on content. Altogether, this work identifies a moderate age-related feature-specific alteration in the way life events are subjectively recalled, among an otherwise stable retrieval profile.

  6. Older adults report moderately more detailed autobiographical memories

    Directory of Open Access Journals (Sweden)

    Robert S Gardner

    2015-05-01

    Full Text Available Autobiographical memory (AM is an essential component of the human mind. Although the amount and types of subjective detail (content that compose AMs constitute important dimensions of recall, age-related changes in memory content are not well characterized. Previously, we introduced the Cue-Recalled Autobiographical Memory test (CRAM; see http://cramtest.info, an instrument that collects subjective reports of AM content, and applied it to college-aged subjects. CRAM elicits AMs using naturalistic word-cues. Subsequently, subjects date each cued AM to a life period and count the number of remembered details from specified categories (features, e.g., temporal detail, spatial detail, persons, objects, and emotions. The current work applies CRAM to a broad range of individuals (18-78 years old to quantify the effects of age on AM content. Subject age showed a moderately positive effect on AM content: older compared with younger adults reported ~16% more details (~25 vs. ~21 in typical AMs. This age-related increase in memory content was similarly observed for remote and recent AMs, although content declined with the age of the event among all subjects. In general, the distribution of details across features was largely consistent among younger and older adults. However, certain types of details, i.e., those related to objects and sequences of events, contributed more to the age effect on content. Altogether, this work identifies a moderate age-related feature-specific alteration in the way life events are subjectively recalled, among an otherwise stable retrieval profile.

  7. Local address and emergency contact details

    CERN Multimedia

    2013-01-01

    The HR Department would like to remind members of the personnel that they are responsible for ensuring that their personal data concerning local address and preferred emergency contact details remains valid and up-to-date.   Both are easily accessible via the links below: Local address: https://edh.cern.ch/Document/Personnel/LocalAddressChange   Emergency contacts: https://edh.cern.ch/Document/Personnel/EC   Please take a few minutes to check your details and modify if necessary. Thank you in advance. HR Department Head Office

  8. Detailed uranium hydrogeochemical and stream sediment reconnaissance data release for the eastern portion of the Montrose NTMS Quadrangle, Colorado, including concentrations of forty-five additional elements

    International Nuclear Information System (INIS)

    Maassen, L.W.

    1981-01-01

    In September and October 1979, the Los Alamos Scientific Laboratory (LASL) conducted a detailed geochemical survey for uranium primarily in the Sawatch Range in the eastern part of the Montrose National Topographic Map Series (NTMS) quadrangle, Colorado, as part of the National Hydrogeochemical and Stream Sediment Reconnaissance (HSSR). Totals of 1034 water and 2087 sediment samples were collected from streams and springs from 2088 locations within a 5420-km 2 area. Statistical data for uranium concentrations in water and sediment samples are presented. Elemental concentration, field measurement, weather, geologic, and geographic data for each sample location are listed for waters and for sediments in appendices. Uranium/thorium ratios for sediment samples are also included. This report contains uranium analyses for water samples and multielement analyses for sediment samples. Sediments were analyzed for uranium and thorium as well as Al, Sb, As, Ba, Be, Bi, Cd, Ca, Ce, Cs, Cl, Cr, Co, Cu, Dy, Eu, Au, Hf, Fe, La, Pb, Li, Lu, Mg, Mn, Ni, Nb, K, Rb, Sm, Sc, Se, Ag, Na, Sr, Ta, Tb, Sn, Ti, W, V, Yb, Zn, and Zr. All elemental analyses were performed at the LASL. Water samples were analyzed for uranium by fluorometry. Sediments were analyzed for uranium by delayed neutron counting. Other elemental concentrations in sediments were determined by neutron activation analysis for 31 elements, by x-ray fluorescence for 12 elements, and by arc-source emission spectrography for 2 elements. Descriptions of procedures as analytical precisions and detection limits are given in the appendix

  9. Planning of cascade stations on the Maotiao He detailed

    Energy Technology Data Exchange (ETDEWEB)

    Guan, W

    1984-09-20

    Details of the hydroelectric power stations on the Maotiao He cascades and examples of how some problems were resolved begin with a description of the river basin survey for topographical features, hydrometeorological conditions, and geological conditions. The river characteristics survey was the basis for planning the cascade power stations and the selection of installed capacity at each station. The review also covers discharge and flood control planning based on rainfall data and the composition of flood areas. The overall development program emphasizes power generation, but also includes irrigation, industrial water supply, and tourism. 2 figures, 1 table.

  10. Understanding brains: details, intuition, and big data.

    Science.gov (United States)

    Marder, Eve

    2015-05-01

    Understanding how the brain works requires a delicate balance between the appreciation of the importance of a multitude of biological details and the ability to see beyond those details to general principles. As technological innovations vastly increase the amount of data we collect, the importance of intuition into how to analyze and treat these data may, paradoxically, become more important.

  11. Understanding Brains: Details, Intuition, and Big Data

    OpenAIRE

    Marder, Eve

    2015-01-01

    Understanding how the brain works requires a delicate balance between the appreciation of the importance of a multitude of biological details and the ability to see beyond those details to general principles. As technological innovations vastly increase the amount of data we collect, the importance of intuition into how to analyze and treat these data may, paradoxically, become more important.

  12. Understanding brains: details, intuition, and big data.

    Directory of Open Access Journals (Sweden)

    Eve Marder

    2015-05-01

    Full Text Available Understanding how the brain works requires a delicate balance between the appreciation of the importance of a multitude of biological details and the ability to see beyond those details to general principles. As technological innovations vastly increase the amount of data we collect, the importance of intuition into how to analyze and treat these data may, paradoxically, become more important.

  13. Memory's aging echo: age-related decline in neural reactivation of perceptual details during recollection.

    Science.gov (United States)

    McDonough, Ian M; Cervantes, Sasha N; Gray, Stephen J; Gallo, David A

    2014-09-01

    Episodic memory decline is a hallmark of normal cognitive aging. Here, we report the first event-related fMRI study to directly investigate age differences in the neural reactivation of qualitatively rich perceptual details during recollection. Younger and older adults studied pictures of complex scenes at different presentation durations along with descriptive verbal labels, and these labels subsequently were used during fMRI scanning to cue picture recollections of varying perceptual detail. As expected from prior behavioral work, the two age groups subjectively rated their recollections as containing similar amounts of perceptual detail, despite objectively measured recollection impairment in older adults. In both age groups, comparisons of retrieval trials that varied in recollected detail revealed robust activity in brain regions previously linked to recollection, including hippocampus and both medial and lateral regions of the prefrontal and posterior parietal cortex. Critically, this analysis also revealed recollection-related activity in visual processing regions that were active in an independent picture-perception task, and these regions showed age-related reductions in activity during recollection that cannot be attributed to age differences in response criteria. These fMRI findings provide new evidence that aging reduces the absolute quantity of perceptual details that are reactivated from memory, and they help to explain why aging reduces the reliability of subjective memory judgments. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. Detailed simulations of liquid and solid-liquid mixing : Turbulent agitated flow and mass transfer

    NARCIS (Netherlands)

    Hartmann, H.

    2005-01-01

    This thesis aims at a contribution to reliable and accurate predictions of complex, multi-phase processes. The reader is presented detailed simulations on liquid and solid-liquid mixing using large eddy simulations (LES) including scalar mixing and particle transport in a Rushton turbine stirred

  15. Air barrier details: How effective are they

    Energy Technology Data Exchange (ETDEWEB)

    A project was initiated to measure the air leakage through three typical details in wood frame walls: the header joist, electric outlets, and window openings. Three construction methods were tested: the poly approach, where a sealed internal polyethylene sheet and caulking provide the air barrier; an external air barrier approach using a continuous vapor permeable membrane sandwiched between two layers of external wall sheathing; and the airtight drywall approach (ADA), where the interior gypsum board finish along with framing and gaskets are the air barrier. Twelve sample panels using each of the three details were built using each of the construction approaches. A traditional wood-frame wall construction detail, with no effort made to create a continuous air barrier, was also built and tested for comparison. The samples were put in a test chamber so that air pressures could create infiltration or exfiltration through the panel under loads similar to those due to wind action. Measurements were made at several stages during construction of each sample to see the effect of different components on the air leakage. Overall, all but the traditional samples and the ADA electrical outlet panel exceeded the current tightness standards for glass and aluminum curtain walls. All three approaches could meet the airtightness standards of the R-2000 program. The total air leakage calculated for each approach is under 20% of that in traditional construction. Of the details tested, window detailing offers the greatest potential for increasing overall airtightness compared to traditional methods. 1 ref., 2 figs., 1 tab.

  16. Promoting a smokers' quitline in Ontario, Canada: an evaluation of an academic detailing approach.

    Science.gov (United States)

    Kirst, Maritt; Schwartz, Robert

    2015-06-01

    This study assesses the impact of an academic detailing quitline promotional outreach program on integration of patient referrals to the quitline by fax in healthcare settings and quitline utilization in Ontario, Canada. The study employed a mixed methods approach for evaluation, with trend analysis of quitline administrative data from the year before program inception (2005) to 2011 and qualitative interviews with quitline stakeholders. Participants in the qualitative interviews included academic detailing program staff, regional tobacco control stakeholders and quitline promotion experts. Quantitative outcomes included the number of fax referral partners and fax referrals received, and quitline reach. Trends in proximal and distal outreach program outcomes were assessed. The qualitative data were analysed through a process of data coding involving the constant comparative technique derived from grounded theory methods. The study identified that the outreach program has had some success in integrating the fax referral program in healthcare settings through evidence of increased fax referrals since program inception. However, organizational barriers to program partner engagement have been encountered. While referral from health professionals through the fax referral programs has increased since the inception of the outreach program, the overall reach of the quitline has not increased. The study findings highlight that an academic detailing approach to quitline promotion can have some success in achieving increased fax referral program integration in healthcare settings. However, findings suggest that investment in a comprehensive promotional strategy, incorporating academic detailing, media and the provision of free cessation medications may be a more effective approach to quitline promotion. © The Author (2013). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  17. Nuclear Weak Rates and Detailed Balance in Stellar Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Misch, G. Wendell, E-mail: wendell@sjtu.edu, E-mail: wendell.misch@gmail.com [Department of Physics and Astronomy, Shanghai Jiao Tong University, 800 Dong Chuan Road, Shanghai 200240 (China)

    2017-07-20

    Detailed balance is often invoked in discussions of nuclear weak transitions in astrophysical environments. Satisfaction of detailed balance is rightly touted as a virtue of some methods of computing nuclear transition strengths, but I argue that it need not necessarily be strictly obeyed in astrophysical environments, especially when the environment is far from weak equilibrium. I present the results of shell model calculations of nuclear weak strengths in both charged-current and neutral-current channels at astrophysical temperatures, finding some violation of detailed balance. I show that a slight modification of the technique to strictly obey detailed balance has little effect on the reaction rates associated with these strengths under most conditions, though at high temperature the modified technique in fact misses some important strength. I comment on the relationship between detailed balance and weak equilibrium in astrophysical conditions.

  18. Regulation No. 56/2006 Coll. of the Nuclear Regulatory Authority of the Slovak Republic dated as of January 12, 2006 on details concerning requirements for quality system documentation of authorisation holder, as well as details concerning quality requirements for nuclear installations, details concerning quality requirements for classified equipment and details concerning the scope of their approval

    International Nuclear Information System (INIS)

    2006-01-01

    This Regulation provides details of the requirements for quality system documentation holder, details of the quality requirements for nuclear installations, details concerning quality requirements for classified equipment and details of the scope of their approval. This Regulation came into force on March 1, 2006.

  19. Calculation of Permeability inside the Basket including one Fuel Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Seung Hwan; Bang, Kyung Sik; Lee, Ju an; Choi, Woo Seok [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    In general, the porous media model and the effective thermal conductivity were used to simply the fuel assembly. The methods of calculating permeability were compared considering the flow inside a basket which includes a nuclear fuel. Detailed fuel assembly was a computational modeling and the flow characteristics were investigated. The flow inside the basket which included a fuel assembly is analyzed by CFD. As the height of the fuel assembly increases, the pressure drop linearly increased. The inertia resistance could be neglected. Three methods to calculate the permeability were compared. The permeability by the friction factor is 50% less than the permeability by wall shear stress and pressure drop.

  20. Light water reactor fuel analysis code FEMAXI-IV(Ver.2). Detailed structure and user's manual

    International Nuclear Information System (INIS)

    Suzuki, Motoe; Saitou, Hiroaki.

    1997-11-01

    A light water reactor fuel behavior analysis code FEMAXI-IV(Ver.2) was developed as an improved version of FEMAXI-IV. Development of FEMAXI-IV has been already finished in 1992, though a detailed structure and input manual of the code have not been open to users yet. Here, the basic theories and structure, the models and numerical solutions applied to FEMAXI-IV(Ver.2), and the material properties adopted in the code are described in detail. In FEMAXI-IV(Ver.2), programming bugs in previous FEMAXI-IV were eliminated, renewal of the pellet thermal conductivity was performed, and a model of thermal-stress restraint on FP gas release was incorporated. For facilitation of effective and wide-ranging application of the code, methods of input/output of the code are also described in detail, and sample output is included. (author)

  1. Towards ligand docking including explicit interface water molecules.

    Directory of Open Access Journals (Sweden)

    Gordon Lemmon

    Full Text Available Small molecule docking predicts the interaction of a small molecule ligand with a protein at atomic-detail accuracy including position and conformation the ligand but also conformational changes of the protein upon ligand binding. While successful in the majority of cases, docking algorithms including RosettaLigand fail in some cases to predict the correct protein/ligand complex structure. In this study we show that simultaneous docking of explicit interface water molecules greatly improves Rosetta's ability to distinguish correct from incorrect ligand poses. This result holds true for both protein-centric water docking wherein waters are located relative to the protein binding site and ligand-centric water docking wherein waters move with the ligand during docking. Protein-centric docking is used to model 99 HIV-1 protease/protease inhibitor structures. We find protease inhibitor placement improving at a ratio of 9:1 when one critical interface water molecule is included in the docking simulation. Ligand-centric docking is applied to 341 structures from the CSAR benchmark of diverse protein/ligand complexes [1]. Across this diverse dataset we see up to 56% recovery of failed docking studies, when waters are included in the docking simulation.

  2. Detailed balance and reciprocity in solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Kirchartz, Thomas; Rau, Uwe [IEF5-Photovoltaik, Forschungszentrum Juelich, 52425 Juelich (Germany)

    2008-12-15

    The limiting efficiency of photovoltaic devices follows from the detailed balance of absorption and emission of a diode according to the Shockley-Queisser theory. However, the principle of detailed balance has more implications for the understanding of photovoltaic devices than only defining the efficiency limit. We show how reciprocity relations between carrier collection and dark carrier injection, between electroluminescence emission and photovoltaic quantum efficiency and between open circuit voltage and light emitting diode quantum efficiency all follow from the principle of detailed balance. We also discuss the validity range of the Shockley-Queisser limit and the reciprocity relations. Discussing the validity of the reciprocity relations helps to deepen the understanding of photovoltaic devices and allows us to identify interrelationships between the superposition principle, the diode ideality and the reciprocity relations. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  3. 42 CFR 401.118 - Deletion of identifying details.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Deletion of identifying details. 401.118 Section 401.118 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... Deletion of identifying details. When CMS publishes or otherwise makes available an opinion or order...

  4. Can quantum coherent solar cells break detailed balance?

    International Nuclear Information System (INIS)

    Kirk, Alexander P.

    2015-01-01

    Carefully engineered coherent quantum states have been proposed as a design attribute that is hypothesized to enable solar photovoltaic cells to break the detailed balance (or radiative) limit of power conversion efficiency by possibly causing radiative recombination to be suppressed. However, in full compliance with the principles of statistical mechanics and the laws of thermodynamics, specially prepared coherent quantum states do not allow a solar photovoltaic cell—a quantum threshold energy conversion device—to exceed the detailed balance limit of power conversion efficiency. At the condition given by steady-state open circuit operation with zero nonradiative recombination, the photon absorption rate (or carrier photogeneration rate) must balance the photon emission rate (or carrier radiative recombination rate) thus ensuring that detailed balance prevails. Quantum state transitions, entropy-generating hot carrier relaxation, and photon absorption and emission rate balancing are employed holistically and self-consistently along with calculations of current density, voltage, and power conversion efficiency to explain why detailed balance may not be violated in solar photovoltaic cells

  5. NSTX Disruption Simulations of Detailed Divertor and Passive Plate Models by Vector Potential Transfer from OPERA Global Analysis Results

    International Nuclear Information System (INIS)

    Titus, P.H.; Avasaralla, S.; Brooks, A.; Hatcher, R.

    2010-01-01

    The National Spherical Torus Experiment (NSTX) project is planning upgrades to the toroidal field, plasma current and pulse length. This involves the replacement of the center-stack, including the inner legs of the TF, OH, and inner PF coils. A second neutral beam will also be added. The increased performance of the upgrade requires qualification of the remaining components including the vessel, passive plates, and divertor for higher disruption loads. The hardware needing qualification is more complex than is typically accessible by large scale electromagnetic (EM) simulations of the plasma disruptions. The usual method is to include simplified representations of components in the large EM models and attempt to extract forces to apply to more detailed models. This paper describes a more efficient approach of combining comprehensive modeling of the plasma and tokamak conducting structures, using the 2D OPERA code, with much more detailed treatment of individual components using ANSYS electromagnetic (EM) and mechanical analysis. This capture local eddy currents and resulting loads in complex details, and allows efficient non-linear, and dynamic structural analyses.

  6. NSTX Disruption Simulations of Detailed Divertor and Passive Plate Models by Vector Potential Transfer from OPERA Global Analysis Results

    Energy Technology Data Exchange (ETDEWEB)

    P. H. Titus, S. Avasaralla, A.Brooks, R. Hatcher

    2010-09-22

    The National Spherical Torus Experiment (NSTX) project is planning upgrades to the toroidal field, plasma current and pulse length. This involves the replacement of the center-stack, including the inner legs of the TF, OH, and inner PF coils. A second neutral beam will also be added. The increased performance of the upgrade requires qualification of the remaining components including the vessel, passive plates, and divertor for higher disruption loads. The hardware needing qualification is more complex than is typically accessible by large scale electromagnetic (EM) simulations of the plasma disruptions. The usual method is to include simplified representations of components in the large EM models and attempt to extract forces to apply to more detailed models. This paper describes a more efficient approach of combining comprehensive modeling of the plasma and tokamak conducting structures, using the 2D OPERA code, with much more detailed treatment of individual components using ANSYS electromagnetic (EM) and mechanical analysis. This capture local eddy currents and resulting loads in complex details, and allows efficient non-linear, and dynamic structural analyses.

  7. Neuroinflammation: the devil is in the details.

    Science.gov (United States)

    DiSabato, Damon J; Quan, Ning; Godbout, Jonathan P

    2016-10-01

    There is significant interest in understanding inflammatory responses within the brain and spinal cord. Inflammatory responses that are centralized within the brain and spinal cord are generally referred to as 'neuroinflammatory'. Aspects of neuroinflammation vary within the context of disease, injury, infection, or stress. The context, course, and duration of these inflammatory responses are all critical aspects in the understanding of these processes and their corresponding physiological, biochemical, and behavioral consequences. Microglia, innate immune cells of the CNS, play key roles in mediating these neuroinflammatory responses. Because the connotation of neuroinflammation is inherently negative and maladaptive, the majority of research focus is on the pathological aspects of neuroinflammation. There are, however, several degrees of neuroinflammatory responses, some of which are positive. In many circumstances including CNS injury, there is a balance of inflammatory and intrinsic repair processes that influences functional recovery. In addition, there are several other examples where communication between the brain and immune system involves neuroinflammatory processes that are beneficial and adaptive. The purpose of this review is to distinguish different variations of neuroinflammation in a context-specific manner and detail both positive and negative aspects of neuroinflammatory processes. In this review, we will use brain and spinal cord injury, stress, aging, and other inflammatory events to illustrate the potential harm and benefits inherent to neuroinflammation. Context, course, and duration of the inflammation are highly important to the interpretation of these events, and we aim to provide insight into this by detailing several commonly studied insults. This article is part of the 60th anniversary supplemental issue. © 2016 International Society for Neurochemistry.

  8. Contribution to a Theory of Detailed Design

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik

    1999-01-01

    It has been recognised, that literature actually do not propose a theory of detailed design. In this paper a theory contribution is proposed, linking part design to organ design and allowing a type of functional reasoning. The proposed theory satisfies our need for explaining the nature of a part...... structure, for support of synthesis of part structure, i.e. detailed design, and our need for digital modelling of part structures.The aim of this paper is to contribute to a design theory valid for detailed design. The proposal is based upon the theory's ability to explain the nature of machine parts...... and assemblies, to support the synthesis of parts and to allow the modelling, especially digital modelling of a part structure. The contribution is based upon Theory of Technical Systems, Hubka, and the Domain Theory, Andreasen. This paper is based on a paper presented at ICED 99, Mortensen, but focus...

  9. 49 CFR 7.6 - Deletion of identifying detail.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Deletion of identifying detail. 7.6 Section 7.6... To Be Made Public by DOT § 7.6 Deletion of identifying detail. Whenever it is determined to be... the deletion will accompany the record published or made available for inspection. ...

  10. The surgery of peripheral nerves (including tumors)

    DEFF Research Database (Denmark)

    Fugleholm, Kåre

    2013-01-01

    Surgical pathology of the peripheral nervous system includes traumatic injury, entrapment syndromes, and tumors. The recent significant advances in the understanding of the pathophysiology and cellular biology of peripheral nerve degeneration and regeneration has yet to be translated into improved...... surgical techniques and better outcome after peripheral nerve injury. Decision making in peripheral nerve surgery continues to be a complex challenge, where the mechanism of injury, repeated clinical evaluation, neuroradiological and neurophysiological examination, and detailed knowledge of the peripheral...... nervous system response to injury are prerequisite to obtain the best possible outcome. Surgery continues to be the primary treatment modality for peripheral nerve tumors and advances in adjuvant oncological treatment has improved outcome after malignant peripheral nerve tumors. The present chapter...

  11. Detailed requirements document for the Interactive Financial Management System (IFMS), volume 1

    Science.gov (United States)

    Dodson, D. B.

    1975-01-01

    The detailed requirements for phase 1 (online fund control, subauthorization accounting, and accounts receivable functional capabilities) of the Interactive Financial Management System (IFMS) are described. This includes information on the following: systems requirements, performance requirements, test requirements, and production implementation. Most of the work is centered on systems requirements, and includes discussions on the following processes: resources authority, allotment, primary work authorization, reimbursable order acceptance, purchase request, obligation, cost accrual, cost distribution, disbursement, subauthorization performance, travel, accounts receivable, payroll, property, edit table maintenance, end-of-year, backup input. Other subjects covered include: external systems interfaces, general inquiries, general report requirements, communication requirements, and miscellaneous. Subjects covered under performance requirements include: response time, processing volumes, system reliability, and accuracy. Under test requirements come test data sources, general test approach, and acceptance criteria. Under production implementation come data base establishment, operational stages, and operational requirements.

  12. Preference for Well-Balanced Saliency in Details Cropped from Photographs

    Science.gov (United States)

    Abeln, Jonas; Fresz, Leonie; Amirshahi, Seyed Ali; McManus, I. Chris; Koch, Michael; Kreysa, Helene; Redies, Christoph

    2016-01-01

    Photographic cropping is the act of selecting part of a photograph to enhance its aesthetic appearance or visual impact. It is common practice with both professional (expert) and amateur (non-expert) photographers. In a psychometric study, McManus et al. (2011b) showed that participants cropped photographs confidently and reliably. Experts tended to select details from a wider range of positions than non-experts, but other croppers did not generally prefer details that were selected by experts. It remained unclear, however, on what grounds participants selected particular details from a photograph while avoiding other details. One of the factors contributing to cropping decision may be visual saliency. Indeed, various saliency-based computer algorithms are available for the automatic cropping of photographs. However, careful experimental studies on the relation between saliency and cropping are lacking to date. In the present study, we re-analyzed the data from the studies by McManus et al. (2011a,b), focusing on statistical image properties. We calculated saliency-based measures for details selected and details avoided during cropping. As expected, we found that selected details contain regions of higher saliency than avoided details on average. Moreover, the saliency center-of-mass was closer to the geometrical center in selected details than in avoided details. Results were confirmed in an eye tracking study with the same dataset of images. Interestingly, the observed regularities in cropping behavior were less pronounced for experts than for non-experts. In summary, our results suggest that, during cropping, participants tend to select salient regions and place them in an image composition that is well-balanced with respect to the distribution of saliency. Our study contributes to the knowledge of perceptual bottom-up features that are germane to aesthetic decisions in photography and their variability in non-experts and experts. PMID:26793086

  13. Near Real-Time Call Detail Record ETL Flows

    Science.gov (United States)

    Cochinwala, Munir; Panagos, Euthimios

    Telecommunication companies face significant business challenges as they strive to reduce subscriber churn and increase average revenue per user (ARPU) by offering new services and incorporating new functionality into existing services. The increased number of service offerings and available functionality result in an ever growing volume of call detail records (CDRs). For many services (e.g., pre-paid), CDRs need to be processed and analyzed in near real-time for several reasons, including charging, on-line subscriber access to their accounts, and analytics for predicting subscriber usage and preventing fraudulent activity. In this paper, we describe the challenges associated with near real-time extract, transform, and load (ETL) of CDR data warehouse flows for supporting both the operational and business intelligence needs of telecommunication services, and we present our approach to addressing these challenges.

  14. How should low-contrast detail detectability be measured in fluoroscopy?

    International Nuclear Information System (INIS)

    Tapiovaara, Markku J.; Sandborg, Michael

    2004-01-01

    The relationship and precision of four methods for measuring the low-contrast detail detectability in fluoroscopic imaging were studied. These included the physical measurement of the accumulation rate of the square of the signal-to-noise ratio (SNR rate 2 ), two-alternative forced-choice (2-AFC) experiments, sixteen-alternative forced-choice (16-AFC) experiments and subjective determination of the threshold contrast. The precision and sensitivity of the threshold contrast measurement were seen to be modest in the constancy testing of fluoroscopic equipment: only large changes in system performance could be reliably detected by that method. The measurement of the SNR rate 2 is suggested instead. The relationship between the results of the various methods were studied, and it was found that human performance can be related to SNR rate 2 by introducing the concept of the effective image information integration time (t eff ). When measured for an unlimited observation time, it depicts the saturation of human performance in detecting a static low-contrast detail in dynamic image noise. Here, t eff was found to be about 0.6 s in 2-AFC tests and 0.3 s in 16-AFC tests

  15. Detail Enhancement for Infrared Images Based on Propagated Image Filter

    Directory of Open Access Journals (Sweden)

    Yishu Peng

    2016-01-01

    Full Text Available For displaying high-dynamic-range images acquired by thermal camera systems, 14-bit raw infrared data should map into 8-bit gray values. This paper presents a new method for detail enhancement of infrared images to display the image with a relatively satisfied contrast and brightness, rich detail information, and no artifacts caused by the image processing. We first adopt a propagated image filter to smooth the input image and separate the image into the base layer and the detail layer. Then, we refine the base layer by using modified histogram projection for compressing. Meanwhile, the adaptive weights derived from the layer decomposition processing are used as the strict gain control for the detail layer. The final display result is obtained by recombining the two modified layers. Experimental results on both cooled and uncooled infrared data verify that the proposed method outperforms the method based on log-power histogram modification and bilateral filter-based detail enhancement in both detail enhancement and visual effect.

  16. Direct-phase-variable model of a synchronous reluctance motor including all slot and winding harmonics

    International Nuclear Information System (INIS)

    Obe, Emeka S.; Binder, A.

    2011-01-01

    A detailed model in direct-phase variables of a synchronous reluctance motor operating at mains voltage and frequency is presented. The model includes the stator and rotor slot openings, the actual winding layout and the reluctance rotor geometry. Hence, all mmf and permeance harmonics are taken into account. It is seen that non-negligible harmonics introduced by slots are present in the inductances computed by the winding function procedure. These harmonics are usually ignored in d-q models. The machine performance is simulated in the stator reference frame to depict the difference between this new direct-phase model including all harmonics and the conventional rotor reference frame d-q model. Saturation is included by using a polynomial fitting the variation of d-axis inductance with stator current obtained by finite-element software FEMAG DC (registered) . The detailed phase-variable model can yield torque pulsations comparable to those obtained from finite elements while the d-q model cannot.

  17. Using VIS/NIR and IR spectral cameras for detecting and separating crime scene details

    Science.gov (United States)

    Kuula, Jaana; Pölönen, Ilkka; Puupponen, Hannu-Heikki; Selander, Tuomas; Reinikainen, Tapani; Kalenius, Tapani; Saari, Heikki

    2012-06-01

    Detecting invisible details and separating mixed evidence is critical for forensic inspection. If this can be done reliably and fast at the crime scene, irrelevant objects do not require further examination at the laboratory. This will speed up the inspection process and release resources for other critical tasks. This article reports on tests which have been carried out at the University of Jyväskylä in Finland together with the Central Finland Police Department and the National Bureau of Investigation for detecting and separating forensic details with hyperspectral technology. In the tests evidence was sought after at an assumed violent burglary scene with the use of VTT's 500-900 nm wavelength VNIR camera, Specim's 400- 1000 nm VNIR camera, and Specim's 1000-2500 nm SWIR camera. The tested details were dried blood on a ceramic plate, a stain of four types of mixed and absorbed blood, and blood which had been washed off a table. Other examined details included untreated latent fingerprints, gunshot residue, primer residue, and layered paint on small pieces of wood. All cameras could detect visible details and separate mixed paint. The SWIR camera could also separate four types of human and animal blood which were mixed in the same stain and absorbed into a fabric. None of the cameras could however detect primer residue, untreated latent fingerprints, or blood that had been washed off. The results are encouraging and indicate the need for further studies. The results also emphasize the importance of creating optimal imaging conditions into the crime scene for each kind of subjects and backgrounds.

  18. Post Entitlement Management Information - Detail Database

    Data.gov (United States)

    Social Security Administration — Contains data that supports the detailed and aggregate receipt, pending and clearance data, as well as other strategic and tactical MI for many Title II and Title...

  19. End region detailing of pretensioned concrete bridge girders : [summary].

    Science.gov (United States)

    2013-03-01

    Introduction of the Florida-I Beam (FIB) in 2009 renewed interest in prestressed concrete beam design, especially end region details. In this study, University of Florida researchers examined construction detailing at the FIB end region.

  20. Light water reactor fuel analysis code FEMAXI-IV(Ver.2). Detailed structure and user`s manual

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Motoe [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Saitou, Hiroaki

    1997-11-01

    A light water reactor fuel behavior analysis code FEMAXI-IV(Ver.2) was developed as an improved version of FEMAXI-IV. Development of FEMAXI-IV has been already finished in 1992, though a detailed structure and input manual of the code have not been open to users yet. Here, the basic theories and structure, the models and numerical solutions applied to FEMAXI-IV(Ver.2), and the material properties adopted in the code are described in detail. In FEMAXI-IV(Ver.2), programming bugs in previous FEMAXI-IV were eliminated, renewal of the pellet thermal conductivity was performed, and a model of thermal-stress restraint on FP gas release was incorporated. For facilitation of effective and wide-ranging application of the code, methods of input/output of the code are also described in detail, and sample output is included. (author)

  1. A Content Analysis of Officer Perceptions of Detailing.

    Science.gov (United States)

    1981-03-01

    answer was "No Way"! Told me needs of service were in Philippine Island CNSG WESTPAC as OPS, three year tour. I wrote letter saying O.K. Was detailed as...off to them as it has to be least preferred of all tasks...personnel detailer. 2 I regret the tardiness of this reply - New Zealand is a long way

  2. Detailed Balance Limit of Efficiency of Broadband-Pumped Lasers.

    Science.gov (United States)

    Nechayev, Sergey; Rotschild, Carmel

    2017-09-13

    Broadband light sources are a wide class of pumping schemes for lasers including LEDs, sunlight and flash lamps. Recently, efficient coupling of broadband light to high-quality micro-cavities has been demonstrated for on-chip applications and low-threshold solar-pumped lasers via cascade energy transfer. However, the conversion of incoherent to coherent light comes with an inherent price of reduced efficiency, which has yet to be assessed. In this paper, we derive the detailed balance limit of efficiency of broadband-pumped lasers and discuss how it is affected by the need to maintain a threshold population inversion and thermodynamically dictated minimal Stokes' shift. We show that lasers' slope efficiency is analogous to the nominal efficiency of solar cells, limited by thermalisation losses and additional unavoidable Stokes' shift. The lasers' power efficiency is analogous to the detailed balance limit of efficiency of solar cells, affected by the cavity mirrors and impedance matching factor, respectively. As an example we analyze the specific case of solar-pumped sensitized Nd 3+ :YAG-like lasers and define the conditions to reach their thermodynamic limit of efficiency. Our work establishes an upper theoretical limit for the efficiency of broadband-pumped lasers. Our general, yet flexible model also provides a way to incorporate other optical and thermodynamic losses and, hence, to estimate the efficiency of non-ideal broadband-pumped lasers.

  3. Family physicians' perceptions of academic detailing: a quantitative and qualitative study

    Directory of Open Access Journals (Sweden)

    O'Connor Nicolette

    2007-10-01

    Full Text Available Abstract Background The efficacy of academic detailing in changing physicians' knowledge and practice has been the subject of many primary research publications and systematic reviews. However, there is little written about the features of academic detailing that physicians find valuable or that affect their use of it. The goal of our project was to explore family physicians' (FPs perceptions of academic detailing and the factors that affect their use of it. Methods We used 2 methods to collect data, a questionnaire and semi-structured telephone interviews. We mailed questionnaires to all FPs in the Dalhousie Office of Continuing Medical Education database and analyzed responses of non-users and users of academic detailing. After a preliminary analysis of questionnaire data, we conducted semi-structured interviews with 7 FPs who did not use academic detailing and 17 who did use it. Results Overall response rate to the questionnaire was 33% (289/869. Response rate of non-users of academic detailing was 15% (60/393, of users was 48% (229/476. The 3 factors that most encouraged use of academic detailing were the topics selected, the evidence-based approach adopted, and the handout material. The 3 factors that most discouraged the use of academic detailing were spending office time doing CME, scheduling time to see the academic detailer, and having CME provided by a non-physician. Users of academic detailing rated it as being more valuable than other forms of CME. Generally, interview data confirmed questionnaire data with the exception that interview informants did not view having CME provided by a non-physician as a barrier. Interview informants mentioned that the evidence-based approach adopted by academic detailing had led them to more critically evaluate information from other CME programs, pharmaceutical representatives, and journal articles, but not advice from specialists. Conclusion Users of academic detailing highly value its educational

  4. Detailed description and user`s manual of high burnup fuel analysis code EXBURN-I

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Motoe [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Saitou, Hiroaki

    1997-11-01

    EXBURN-I has been developed for the analysis of LWR high burnup fuel behavior in normal operation and power transient conditions. In the high burnup region, phenomena occur which are different in quality from those expected for the extension of behaviors in the mid-burnup region. To analyze these phenomena, EXBURN-I has been formed by the incorporation of such new models as pellet thermal conductivity change, burnup-dependent FP gas release rate, and cladding oxide layer growth to the basic structure of low- and mid-burnup fuel analysis code FEMAXI-IV. The present report describes in detail the whole structure of the code, models, and materials properties. Also, it includes a detailed input manual and sample output, etc. (author). 55 refs.

  5. Detailed Aerodynamic Analysis of a Shrouded Tail Rotor Using an Unstructured Mesh Flow Solver

    Science.gov (United States)

    Lee, Hee Dong; Kwon, Oh Joon

    The detailed aerodynamics of a shrouded tail rotor in hover has been numerically studied using a parallel inviscid flow solver on unstructured meshes. The numerical method is based on a cell-centered finite-volume discretization and an implicit Gauss-Seidel time integration. The calculation was made for a single blade by imposing a periodic boundary condition between adjacent rotor blades. The grid periodicity was also imposed at the periodic boundary planes to avoid numerical inaccuracy resulting from solution interpolation. The results were compared with available experimental data and those from a disk vortex theory for validation. It was found that realistic three-dimensional modeling is important for the prediction of detailed aerodynamics of shrouded rotors including the tip clearance gap flow.

  6. Details and justifications for the MAP concept specification for acceleration above 63 GeV

    Energy Technology Data Exchange (ETDEWEB)

    Berg, J. Scott [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.

    2014-02-28

    The Muon Accelerator Program (MAP) requires a concept specification for each of the accelerator systems. The Muon accelerators will bring the beam energy from a total energy of 63 GeV to the maximum energy that will fit on the Fermilab site. Justifications and supporting references are included, providing more detail than will appear in the concept specification itself.

  7. Detailed CFD Modelling of Open Refrigerated Display Cabinets

    Directory of Open Access Journals (Sweden)

    Pedro Dinis Gaspar

    2012-01-01

    Full Text Available A comprehensive and detailed computational fluid dynamics (CFDs modelling of air flow and heat transfer in an open refrigerated display cabinet (ORDC is performed in this study. The physical-mathematical model considers the flow through the internal ducts, across fans and evaporator, and includes the thermal response of food products. The air humidity effect and thermal radiation heat transfer between surfaces are taken into account. Experimental tests were performed to characterize the phenomena near physical extremities and to validate the numerical predictions of air temperature, relative humidity, and velocity. Numerical and experimental results comparison reveals the predictive capabilities of the computational model for the optimized conception and development of this type of equipments. Numerical predictions are used to propose geometrical and functional parametric studies that improve thermal performance of the ORDC and consequently food safety.

  8. DAGAL: Detailed Anatomy of Galaxies

    Science.gov (United States)

    Knapen, Johan H.

    2017-03-01

    The current IAU Symposium is closely connected to the EU-funded network DAGAL (Detailed Anatomy of Galaxies), with the final annual network meeting of DAGAL being at the core of this international symposium. In this short paper, we give an overview of DAGAL, its training activities, and some of the scientific advances that have been made under its umbrella.

  9. Detailed 3-D nuclear analysis of ITER outboard blanket modules

    Energy Technology Data Exchange (ETDEWEB)

    Bohm, Tim, E-mail: tdbohm@wisc.edu [Fusion Technology Institute, University of Wisconsin-Madison, Madison, WI (United States); Davis, Andrew; Sawan, Mohamed; Marriott, Edward; Wilson, Paul [Fusion Technology Institute, University of Wisconsin-Madison, Madison, WI (United States); Ulrickson, Michael; Bullock, James [Formerly, Fusion Technology, Sandia National Laboratories, Albuquerque, NM (United States)

    2015-10-15

    Highlights: • Nuclear analysis was performed on detailed CAD models placed in a 40 degree model of ITER. • The regions examined include BM09, the upper ELM coil region (BM11–13), the neutral beam (NB) region (BM13–16), and BM18. • The results show that VV nuclear heating exceeds limits in the NB and upper ELM coil regions. • The results also show that the level of He production in parts of BM18 exceeds limits. • These calculations are being used to modify the design of the ITER blanket modules. - Abstract: In the ITER design, the blanket modules (BM) provide thermal and nuclear shielding for the vacuum vessel (VV), magnets, and other components. We used the CAD based DAG-MCNP5 transport code to analyze detailed models inserted into a 40 degree partially homogenized ITER global model. The regions analyzed include BM09, BM16 near the heating neutral beam injection (HNB) region, BM11–13 near the upper ELM coil region, and BM18. For the BM16 HNB region, the VV nuclear heating behind the NB region exceeds the design limit by up to 80%. For the BM11–13 region, the nuclear heating of the VV exceeds the design limit by up to 45%. For BM18, the results show that He production does not meet the limit necessary for re-welding. The results presented in this work are being used by the ITER Organization Blanket and Tokamak Integration groups to modify the BM design in the cases where limits are exceeded.

  10. Detailed 3-D nuclear analysis of ITER outboard blanket modules

    International Nuclear Information System (INIS)

    Bohm, Tim; Davis, Andrew; Sawan, Mohamed; Marriott, Edward; Wilson, Paul; Ulrickson, Michael; Bullock, James

    2015-01-01

    Highlights: • Nuclear analysis was performed on detailed CAD models placed in a 40 degree model of ITER. • The regions examined include BM09, the upper ELM coil region (BM11–13), the neutral beam (NB) region (BM13–16), and BM18. • The results show that VV nuclear heating exceeds limits in the NB and upper ELM coil regions. • The results also show that the level of He production in parts of BM18 exceeds limits. • These calculations are being used to modify the design of the ITER blanket modules. - Abstract: In the ITER design, the blanket modules (BM) provide thermal and nuclear shielding for the vacuum vessel (VV), magnets, and other components. We used the CAD based DAG-MCNP5 transport code to analyze detailed models inserted into a 40 degree partially homogenized ITER global model. The regions analyzed include BM09, BM16 near the heating neutral beam injection (HNB) region, BM11–13 near the upper ELM coil region, and BM18. For the BM16 HNB region, the VV nuclear heating behind the NB region exceeds the design limit by up to 80%. For the BM11–13 region, the nuclear heating of the VV exceeds the design limit by up to 45%. For BM18, the results show that He production does not meet the limit necessary for re-welding. The results presented in this work are being used by the ITER Organization Blanket and Tokamak Integration groups to modify the BM design in the cases where limits are exceeded.

  11. Detail, Facture, and Colour in the Architecture of Polish Single-Family Houses after 1989

    Science.gov (United States)

    Sztafrowski, Marek

    2017-10-01

    , rapidly developing building market precipitated the creation of catalogue solutions, repetitive and conventional. Currently, potential customers have access to catalogues of numerous design studios and companies, every last one including few dozens of comprehensive constructions design options of single-family house at the fewest. In the conventional catalogue designs, steep roofs began to gain popularity, becoming increasingly complicated with various choices of roof windows as time passes. The entrances are frequently adorned with porticos and columns. So-called “mansion architecture” of the single-family houses has developed. Recently, fashion alluding to modernism of 1920s has developed in the single-family houses architecture. New trends among architects are adapted with increasing frequency by investors looking for unconventional solutions. The neo-modernism trend is noticeable predominantly in individual projects; however, it appears in catalogue propositions with increasing frequency. Designs of single-family houses of simplistic shape and distinct expression emerge, with flat roofs, minimalistic detail, and vital, carefully chosen in terms of facture and colour, material solutions of wall finishes. Apart from the conventional solutions, presently the building market offers a vast variety of meticulously prepared, factory-made, and thoroughly checked in various realisations details. Architects discontinued using manufactured and individually designed detail in favour of utilising conventional solutions for designed objects. In a well-designed single-family house, facture, colour, and detail of materials utilised in external finishes should harmonise with the building shape and form.

  12. Residential Energy Consumption Survey: Quality Profile

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The Residential Energy Consumption Survey (RECS) is a periodic national survey that provides timely information about energy consumption and expenditures of U.S. households and about energy-related characteristics of housing units. The survey was first conducted in 1978 as the National Interim Energy Consumption Survey (NIECS), and the 1979 survey was called the Household Screener Survey. From 1980 through 1982 RECS was conducted annually. The next RECS was fielded in 1984, and since then, the survey has been undertaken at 3-year intervals. The most recent RECS was conducted in 1993.

  13. Severn Barrage project. Detailed report - V. 5

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    Prior to the present programme of work, the effects which a tidal power barrage would have on the region, during both construction and operation, had not been studied in detail. This volume of the Detailed Report therefore represents a significant extension of work into these aspects of the Severn Barrage Project. In the Regional Study, a number of benefits have been identified, some of which may represent net benefits nationally. The economic assessment of both regional and national benefits and costs is presented. The second part of this volume reports on the work done on the Legal Background for the Project. (author).

  14. Detailed analysis of the supermarket task included on the Japanese version of the Rapid Dementia Screening Test.

    Science.gov (United States)

    Moriyama, Yasushi; Yoshino, Aihide; Muramatsu, Taro; Mimura, Masaru

    2017-05-01

    The supermarket task, which is included in the Japanese version of the Rapid Dementia Screening Test, requires the quick (1 min) generation of words for things that can be bought in a supermarket. Cluster size and switches are investigated during this task. We investigated how the severity of dementia related to cluster size and switches on the supermarket task in patients with Alzheimer's disease. We administered the Japanese version of the Rapid Dementia Screening Test to 250 patients with very mild to severe Alzheimer's disease and to 49 healthy volunteers. Patients had Mini-Mental State Examination scores from 12 to 26 and Clinical Dementia Rating scale scores from 0.5 to 3. Patients were divided into four groups based on their Clinical Dementia Rating score (0.5, 1, 2, 3). We performed statistical analyses between the four groups and control subjects based on cluster size and switch scores on the supermarket task. The score for cluster size and switches deteriorated according to the severity of dementia. Moreover, for subjects with a Clinical Dementia Rating score of 0.5, cluster size was impaired, but switches were intact. Our findings indicate that the scores for cluster size and switches on the supermarket task may be useful for detecting the severity of symptoms of dementia in patients with Alzheimer's disease. © 2016 The Authors. Psychogeriatrics © 2016 Japanese Psychogeriatric Society.

  15. Detailed Debunking of Denial

    Science.gov (United States)

    Enting, I. G.; Abraham, J. P.

    2012-12-01

    The disinformation campaign against climate science has been compared to a guerilla war whose tactics undermine the traditional checks and balances of science. One comprehensive approach has to been produce archives of generic responses such as the websites of RealClimate and SkepticalScience. We review our experiences with an alternative approach of detailed responses to a small number of high profile cases. Our particular examples were Professor Ian Plimer and Christopher Monckton, the Third Viscount Monckton of Brenchley, each of whom has been taken seriously by political leaders in our respective countries. We relate our experiences to comparable examples such as John Mashey's analysis of the Wegman report and the formal complaints about Lomborg's "Skeptical Environmentalist" and Durkin's "Great Global Warming Swindle". Our two approaches used contrasting approaches: an on-line video of a lecture vs an evolving compendium of misrepresentations. Additionally our approaches differed in the emphasis. The analysis of Monckton concentrated on the misrepresentation of the science, while the analysis of Plimer concentrated on departures from accepted scientific practice: fabrication of data, misrepresentation of cited sources and unattributed use of the work of others. Benefits of an evolving compendium were the ability to incorporate contributions from members of the public who had identified additional errors and the scope for addressing new aspects as they came to public attention. `Detailed debunking' gives non-specialists a reference point for distinguishing non-science when engaging in public debate.

  16. Sensory memory consolidation observed: Increased specificity of detail over days

    Science.gov (United States)

    Weinberger, Norman M.; Miasnikov, Alexandre A.; Chen, Jemmy C.

    2010-01-01

    Memories are usually multidimensional, including contents such as sensory details, motivational state and emotional overtones. Memory contents generally change over time, most often reported as a loss in the specificity of detail. To study the temporal changes in the sensory contents of associative memory without motivational and emotional contents, we induced memory for acoustic frequency by pairing a tone with stimulation of the cholinergic nucleus basalis. Adult male rats were first tested for behavioral responses (disruption of ongoing respiration) to tones (1–15 kHz), yielding pre-training behavioral frequency generalization gradients (BFGG). They next received three days of training consisting of a conditioned stimulus (CS) tone (8.00 kHz, 70 dB, 2 s) either Paired (n = 5) or Unpaired (n = 5) with weak electrical stimulation (~48 μA) of the nucleus basalis (100 Hz, 0.2 s, co-terminating with CS offset). Testing for behavioral memory was performed by obtaining post-training BFGGs at two intervals, 24 and 96 h after training. At 24 h post-training, the Paired group exhibited associative behavioral memory manifested by significantly larger responses to tone than the Unpaired group. However, they exhibited no specificity in memory for the frequency of the tonal CS, as indexed by a flat BFGG. In contrast, after 96 h post-training the Paired group did exhibit specificity of memory as revealed by tuned BFGGs with a peak at the CS-band of frequencies. This increased detail of memory developed due to a loss of response to lower and higher frequency side-bands, without any change in the absolute magnitude of response to CS-band frequencies. These findings indicate that the sensory contents of associative memory can be revealed to become more specific, through temporal consolidation in the absence of non-sensory factors such as motivation and emotion. PMID:19038352

  17. Sensory memory consolidation observed: increased specificity of detail over days.

    Science.gov (United States)

    Weinberger, Norman M; Miasnikov, Alexandre A; Chen, Jemmy C

    2009-03-01

    Memories are usually multidimensional, including contents such as sensory details, motivational state and emotional overtones. Memory contents generally change over time, most often reported as a loss in the specificity of detail. To study the temporal changes in the sensory contents of associative memory without motivational and emotional contents, we induced memory for acoustic frequency by pairing a tone with stimulation of the cholinergic nucleus basalis. Adult male rats were first tested for behavioral responses (disruption of ongoing respiration) to tones (1-15 kHz), yielding pre-training behavioral frequency generalization gradients (BFGG). They next received three days of training consisting of a conditioned stimulus (CS) tone (8.00 kHz, 70 dB, 2 s) either Paired (n=5) or Unpaired (n=5) with weak electrical stimulation (approximately 48 microA) of the nucleus basalis (100 Hz, 0.2 s, co-terminating with CS offset). Testing for behavioral memory was performed by obtaining post-training BFGGs at two intervals, 24 and 96 h after training. At 24 h post-training, the Paired group exhibited associative behavioral memory manifested by significantly larger responses to tone than the Unpaired group. However, they exhibited no specificity in memory for the frequency of the tonal CS, as indexed by a flat BFGG. In contrast, after 96 h post-training the Paired group did exhibit specificity of memory as revealed by tuned BFGGs with a peak at the CS-band of frequencies. This increased detail of memory developed due to a loss of response to lower and higher frequency side-bands, without any change in the absolute magnitude of response to CS-band frequencies. These findings indicate that the sensory contents of associative memory can be revealed to become more specific, through temporal consolidation in the absence of non-sensory factors such as motivation and emotion.

  18. Strengthening of competence planning truss through instructional media development details

    Science.gov (United States)

    Handayani, Sri; Nurcahyono, M. Hadi

    2017-03-01

    Competency-Based Learning is a model of learning in which the planning, implementation, and assessment refers to the mastery of competencies. Learning in lectures conducted in the framework for comprehensively realizing student competency. Competence means the orientation of the learning activities in the classroom must be given to the students to be more active learning, active search for information themselves and explore alone or with friends in learning activities in pairs or in groups, learn to use a variety of learning resources and printed materials, electronic media, as well as environment. Analysis of learning wooden structure known weakness in the understanding of the truss detail. Hence the need for the development of media that can provide a clear picture of what the structure of the wooden horses and connection details. Development of instructional media consisted of three phases of activity, namely planning, production and assessment. Learning Media planning should be tailored to the needs and conditions necessary to provide reinforcement to the mastery of competencies, through the table material needs. The production process of learning media is done by using hardware (hardware) and software (software) to support the creation of a medium of learning. Assessment of the media poduk yan include feasibility studies, namely by subject matter experts, media experts, while testing was done according to the student's perception of the product. The results of the analysis of the materials for the instructional aspects of the results obtained 100% (very good) and media analysis for the design aspects of the media expressed very good with a percentage of 88.93%. While the analysis of student perceptions expressed very good with a percentage of 84.84%. Media Learning Truss Details feasible and can be used in the implementation of learning wooden structure to provide capacity-building in planning truss

  19. The effect of giving detailed information about intravenous radiopharmaceutical administration on the anxiety level of patients who request more information

    International Nuclear Information System (INIS)

    Kaya, E.; Ciftci, I.; Demirel, R.; Gecici, O.; Cigerci, Y.

    2010-01-01

    Nuclear medicine procedures use radiopharmaceuticals, which produce radiation and potential adverse reactions, albeit at a low rate. It is the patient's ethical, legal, and medical right to be informed of the potential side effects of procedures applied to them. Our purpose was to determine the effect of providing information about intravenous radiopharmaceutical administration on the anxiety level of patients who request more information. This study was completed in two separate Nuclear Medicine Departments. The study included 620 (247 M, 373 F) patients who had been referred for myocardial perfusion, bone, dynamic renal, and thyroid scintigraphic examinations. The patients were divided into two groups according to whether they requested more information or not. Group 1 consisted of 388 patients who wanted to receive more information about the procedure, while Group 2 consisted of 232 patients who did not request additional information. The State-Trait Anxiety Inventory (STAI-S and STAI-T) was used to determine a patient's anxiety level. After simple information was given, state and trait anxiety levels were measured in both groups. We gave detailed information to the patients in Group 1 and then measured state anxiety again. Detailed information included an explanation of the radiopharmaceutical risk and probable side effects due to the scan procedure. There was no statistical difference between Groups 1 and 2 in STAI-T or STAI-S scores after simple information was given (p=0.741 and p=0.945, respectively). The mean value of STAI-S score was increased after the provision of detailed information and there was a statistically significant difference between after simple information STAI-S and after detailed information STAI-S (p<0.001). The STAI-S score was increased in 246 patients and decreased in 110 patients after detailed information, while there was no change in 32 patients. After detailed information, the greatest increase in STAI-S score was seen in the

  20. SCOWLP: a web-based database for detailed characterization and visualization of protein interfaces

    Directory of Open Access Journals (Sweden)

    Schroeder Michael

    2006-03-01

    Full Text Available Abstract Background Currently there is a strong need for methods that help to obtain an accurate description of protein interfaces in order to be able to understand the principles that govern molecular recognition and protein function. Many of the recent efforts to computationally identify and characterize protein networks extract protein interaction information at atomic resolution from the PDB. However, they pay none or little attention to small protein ligands and solvent. They are key components and mediators of protein interactions and fundamental for a complete description of protein interfaces. Interactome profiling requires the development of computational tools to extract and analyze protein-protein, protein-ligand and detailed solvent interaction information from the PDB in an automatic and comparative fashion. Adding this information to the existing one on protein-protein interactions will allow us to better understand protein interaction networks and protein function. Description SCOWLP (Structural Characterization Of Water, Ligands and Proteins is a user-friendly and publicly accessible web-based relational database for detailed characterization and visualization of the PDB protein interfaces. The SCOWLP database includes proteins, peptidic-ligands and interface water molecules as descriptors of protein interfaces. It contains currently 74,907 protein interfaces and 2,093,976 residue-residue interactions formed by 60,664 structural units (protein domains and peptidic-ligands and their interacting solvent. The SCOWLP web-server allows detailed structural analysis and comparisons of protein interfaces at atomic level by text query of PDB codes and/or by navigating a SCOP-based tree. It includes a visualization tool to interactively display the interfaces and label interacting residues and interface solvent by atomic physicochemical properties. SCOWLP is automatically updated with every SCOP release. Conclusion SCOWLP enriches

  1. Detailed simulations of lighting conditions in office rooms lit by daylight and artificial light

    DEFF Research Database (Denmark)

    Iversen, Anne

    In this thesis the effect on the annual artificial lighting demand is investigated by employing detailed simulations of lighting conditions in office rooms lit by daylight and artificial. The simulations of the artificial lighting demand is accomplished through daylight simulations in Radiance....... The detailed simulations includes studies of the resolution of different weather data sets in climate-based daylight modeling. Furthermore, influence of the electrical lighting demand by simulating with dynamic occupancy patterns is studied. Finally the thesis explores the influence of obstructions in an urban...... canyon on the daylight availability within the buildings, and hence on the energy consumption for artificial lights. The results from the thesis demonstrates that the effect on the outcome of the daylight simulations when simulating with typical weather data files for the location of Copenhagen...

  2. Strategies for replacement of obsolete equipment - including reverse engineering

    International Nuclear Information System (INIS)

    Irish, C.S.

    2000-01-01

    The presentation shall detail the challenges facing nuclear power plants with the replacement of obsolete equipment and the strategies used to overcome those challenges. The presentation will outline the common equipment types which are either obsolete or are becoming obsolete, with a focus on safety related components. The four options of the obsolete equipment replacement philosophy will be presented with replacement examples from each of the options shown for discussion purposes. Detailed examples from each of the four obsolete equipment replacement options of: commercially available equivalent component; modification of a commercial available component; reverse engineering of the original component; and finally, design changes using a new component, shall be presented to evaluate the advantages and disadvantages of each option. The presentation will include the technical challenges, cost and schedule concerns for each of the four options. Emphasis will be placed on the technological challenges associated with replacing old and obsolete equipment. The following is a bullet list of the challenges which will be discussed: Missing, misleading or no information on the original component; Acquiring information from the original equipment manufacturer and the plant; Using a sample component for the replacement evaluation and or reverse engineering; and Reverse engineering old equipment with newly available discrete components. The presentation will include the equivalency documentation using the EPRI guidelines when replacing an original component with a different yet form, fit and functional equivalent component. The presentation will conclude with a discussion of the advantages and disadvantages of the replacement of the obsolete component with a form, fit and functional equivalent component vs. the replacement of the original component with a new component with today's technology. (author)

  3. A detailed gravimetric geoid from North America to Eurasia

    Science.gov (United States)

    Vincent, S. F.; Strange, W. E.; Marsh, J. G.

    1972-01-01

    A detailed gravimetric geoid of the United States, North Atlantic, and Eurasia, which was computed from a combination of satellite derived and surface gravity data, is presented. The precision of this detailed geoid is + or - 2 to + or - 3 m in the continents but may be in the range of 5 to 7 m in those areas where data is sparse. Comparisons of the detailed gravimetric geoid with results of Rapp, Fischer, and Rice for the United States, Bomford in Europe, and Heiskanen and Fischer in India are presented. Comparisons are also presented with geoid heights from satellite solutions for geocentric station coordinates in North America, the Caribbean, and Europe.

  4. First two bilateral hand transplantations in India (Part 2: Technical details

    Directory of Open Access Journals (Sweden)

    Mohit Sharma

    2017-01-01

    Full Text Available Introduction: This article deals with two patients who underwent bilateral hand transplantation following amputation of both upper limbs at the distal third of the foream. Materials and Methods: The first patient had a history of loss of hands in a train accident , with possiblity of a run over element during the injury. The second patient lost his both hands in a mine blast. The preoperative work up included detailed clinical and psychological evaluation. The donor retrieval was similar in both the cases and the donors were housed in our own instittution. The donor preparation, recipient preparation and the transplant procedure was similar except for the need of primary tendon transfers in the left hand of the first patient. Results: The first patient needed a free flap transfer to cover compromised skin flap on the left hand on the second day. The second hand transplant was uneventful. Both the recipients are now back to their normal daily routines. Conclusions: Hand transplantation is a potentially life altering procedure, but to optimise the results, it is imperative that there is a meticulous planning and diligent execution with utmost importance to the detail coupled with a synchronised team effort.

  5. Testing for detailed balance in a financial market

    Science.gov (United States)

    Fiebig, H. R.; Musgrove, D. P.

    2015-06-01

    We test a historical price-time series in a financial market (the NASDAQ 100 index) for a statistical property known as detailed balance. The presence of detailed balance would imply that the market can be modeled by a stochastic process based on a Markov chain, thus leading to equilibrium. In economic terms, a positive outcome of the test would support the efficient market hypothesis, a cornerstone of neo-classical economic theory. In contrast to the usage in prevalent economic theory the term equilibrium here is tied to the returns, rather than the price-time series. The test is based on an action functional S constructed from the elements of the detailed balance condition and the historical data set, and then analyzing S by means of simulated annealing. Checks are performed to verify the validity of the analysis method. We discuss the outcome of this analysis.

  6. Detailed sectional anatomy of the spine

    International Nuclear Information System (INIS)

    Rauschning, W.

    1985-01-01

    Morphologic studies on the human spine constitute a special challenge because of the spine's complex topographic anatomy and the intimate relationship between the supporting skeleton and the contiguous soft tissues (muscles, discs, joint capsules) as well as the neurovascular contents of the spinal canal and intervertebral foramina. The improving resolution and multiplanar image reformatting capabilities of modern CT scanners call for accurate anatomic reference material. Such anatomic images should be available without distortion, in natural colors, and in considerable detail. The images should present the anatomy in the correct axial, sagittal, and coronal planes and should also be sufficiently closely spaced so as to follow the thin cuts of modern CT scanners. This chapter details one of several recent attempts to correlate gross anatomy with the images depicted by high-resolution CT. The methods of specimen preparation, sectioning, and photographing have been documented elsewhere

  7. 5 CFR 370.107 - Details to small business concerns.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Details to small business concerns. 370... INFORMATION TECHNOLOGY EXCHANGE PROGRAM § 370.107 Details to small business concerns. (a) The head of each... organizations in each calendar year, at least 20 percent are to small business concerns, in accordance with 5 U...

  8. Detailed modeling of mountain wave PSCs

    Directory of Open Access Journals (Sweden)

    S. Fueglistaler

    2003-01-01

    Full Text Available Polar stratospheric clouds (PSCs play a key role in polar ozone depletion. In the Arctic, PSCs can occur on the mesoscale due to orographically induced gravity waves. Here we present a detailed study of a mountain wave PSC event on 25-27 January 2000 over Scandinavia. The mountain wave PSCs were intensively observed by in-situ and remote-sensing techniques during the second phase of the SOLVE/THESEO-2000 Arctic campaign. We use these excellent data of PSC observations on 3 successive days to analyze the PSCs and to perform a detailed comparison with modeled clouds. We simulated the 3-dimensional PSC structure on all 3 days with a mesoscale numerical weather prediction (NWP model and a microphysical box model (using best available nucleation rates for ice and nitric acid trihydrate particles. We show that the combined mesoscale/microphysical model is capable of reproducing the PSC measurements within the uncertainty of data interpretation with respect to spatial dimensions, temporal development and microphysical properties, without manipulating temperatures or using other tuning parameters. In contrast, microphysical modeling based upon coarser scale global NWP data, e.g. current ECMWF analysis data, cannot reproduce observations, in particular the occurrence of ice and nitric acid trihydrate clouds. Combined mesoscale/microphysical modeling may be used for detailed a posteriori PSC analysis and for future Arctic campaign flight and mission planning. The fact that remote sensing alone cannot further constrain model results due to uncertainities in the interpretation of measurements, underlines the need for synchronous in-situ PSC observations in campaigns.

  9. Reliability evaluation of containments including soil-structure interaction

    International Nuclear Information System (INIS)

    Pires, J.; Hwang, H.; Reich, M.

    1985-12-01

    Soil-structure interaction effects on the reliability assessment of containment structures are examined. The probability-based method for reliability evaluation of nuclear structures developed at Brookhaven National Laboratory is extended to include soil-structure interaction effects. In this method, reliability of structures is expressed in terms of limit state probabilities. Furthermore, random vibration theory is utilized to calculate limit state probabilities under random seismic loads. Earthquake ground motion is modeled by a segment of a zero-mean, stationary, filtered Gaussian white noise random process, represented by its power spectrum. All possible seismic hazards at a site, represented by a hazard curve, are also included in the analysis. The soil-foundation system is represented by a rigid surface foundation on an elastic halfspace. Random and other uncertainties in the strength properties of the structure, in the stiffness and internal damping of the soil, are also included in the analysis. Finally, a realistic reinforced concrete containment is analyzed to demonstrate the application of the method. For this containment, the soil-structure interaction effects on; (1) limit state probabilities, (2) structural fragility curves, (3) floor response spectra with probabilistic content, and (4) correlation coefficients for total acceleration response at specified structural locations, are examined in detail. 25 refs., 21 figs., 12 tabs

  10. Detailed site characterization for final disposal of spent fuel in Finland - Case study Loviisa

    International Nuclear Information System (INIS)

    Anttila, P.; Ahokas, H.; Ruotsalainen, P.; Cosma, C.; Keskinen, J.; Hinkkanen, H.; Rouhiainen, P.; Oehberg, A.

    1998-01-01

    The spent fuel from the Finnish nuclear power plants will be disposed of in the Finnish bedrock. Pos iva Oy is responsible for the site selection programme carried out in accordance with the governmental decisions. Preliminary site investigations were made in five areas in 1987-1992. Based on the results, three areas, Romuvaara in Kuhmo, Kivetty in Aeaenekoski and Olkiluoto in Eurajoki, were selected for the detailed site characterization in 1993-2000. The final site will be selected by the end of the year 2000. The interim reporting of the detailed studies of the three areas was made in 1996. In 1997, the island of Haestholmen, as the host to the Loviisa NPP, was included as a fourth candidate site in the programme for the detailed site investigations. The goal is to characterize this site also in detail by the end of 2000 to attain the same level of knowledge as available from the three other sites. The background information existing from the studies made for the construction of the repository for the low-and intermediate-level wastes will create a good basis to reach the target. The research programme for the detailed site characterization has mainly been focused on groundwater flow and geochemistry due to their importance in terms of long-term safety of the repository. Equipment and methodology development by Posiva has introduced new tools that provide more accurate data on relevant parameters than the ones used in previous stages of site characterization. The programme also contains studies for additional information of the structural and geological properties of the bedrock towards the depth. Also predictive modelling has been made for evaluating the relevance of the assumptions made. The methods applied in the site characterization have comprised, e.g., geological mapping, deep core drilling, groundwater sampling and analyzing, hydraulic testing and geophysical measurements

  11. Detailed site characterization for final disposal of spent fuel in Finland - Case study Loviisa

    Energy Technology Data Exchange (ETDEWEB)

    Anttila, P. [IVO Power Engineering Ltd. (Finland); Ahokas, H.; Ruotsalainen, P. [Fintact Oy (Finland); Cosma, C.; Keskinen, J. [Vibrometric Oy (Finland); Hinkkanen, H. [Posiva Oy (Finland); Rouhiainen, P. [PRG-Tec Oy (Finland); Oehberg, A. [Saanio and Riekkola Consulting Engineers (Finland)

    1998-09-01

    The spent fuel from the Finnish nuclear power plants will be disposed of in the Finnish bedrock. Pos iva Oy is responsible for the site selection programme carried out in accordance with the governmental decisions. Preliminary site investigations were made in five areas in 1987-1992. Based on the results, three areas, Romuvaara in Kuhmo, Kivetty in Aeaenekoski and Olkiluoto in Eurajoki, were selected for the detailed site characterization in 1993-2000. The final site will be selected by the end of the year 2000. The interim reporting of the detailed studies of the three areas was made in 1996. In 1997, the island of Haestholmen, as the host to the Loviisa NPP, was included as a fourth candidate site in the programme for the detailed site investigations. The goal is to characterize this site also in detail by the end of 2000 to attain the same level of knowledge as available from the three other sites. The background information existing from the studies made for the construction of the repository for the low-and intermediate-level wastes will create a good basis to reach the target. The research programme for the detailed site characterization has mainly been focused on groundwater flow and geochemistry due to their importance in terms of long-term safety of the repository. Equipment and methodology development by Posiva has introduced new tools that provide more accurate data on relevant parameters than the ones used in previous stages of site characterization. The programme also contains studies for additional information of the structural and geological properties of the bedrock towards the depth. Also predictive modelling has been made for evaluating the relevance of the assumptions made. The methods applied in the site characterization have comprised, e.g., geological mapping, deep core drilling, groundwater sampling and analyzing, hydraulic testing and geophysical measurements 23 refs, 4 figs

  12. Techniques for depth-resolved imaging through turbid media including coherence-gated imaging

    International Nuclear Information System (INIS)

    Dunsby, C; French, P M W

    2003-01-01

    This article aims to review the panoply of techniques for realising optical imaging through turbid media such as biological tissue. It begins by briefly discussing optical scattering and outlines the various approaches that have been developed to image through scattering media including spatial filtering, time-gated imaging and coherence-based techniques. The discussion includes scanning and wide-field techniques and concentrates on techniques to discriminate in favour of unscattered ballistic light although imaging with scattered light is briefly reviewed. Wide-field coherence-gated imaging techniques are discussed in some detail with particular emphasis placed on techniques to achieve real-time high-resolution three-dimensional imaging including through turbid media, providing rapid whole-field acquisition and high depth and transverse spatial resolution images. (topical review)

  13. GEOMETRIC MODELLING OF TREE ROOTS WITH DIFFERENT LEVELS OF DETAIL

    Directory of Open Access Journals (Sweden)

    J. I. Guerrero Iñiguez

    2017-09-01

    Full Text Available This paper presents a geometric approach for modelling tree roots with different Levels of Detail, suitable for analysis of the tree anchoring, potentially occupied underground space, interaction with urban elements and damage produced and taken in the built-in environment. Three types of tree roots are considered to cover several species: tap root, heart shaped root and lateral roots. Shrubs and smaller plants are not considered, however, a similar approach can be considered if the information is available for individual species. The geometrical approach considers the difficulties of modelling the actual roots, which are dynamic and almost opaque to direct observation, proposing generalized versions. For each type of root, different geometric models are considered to capture the overall shape of the root, a simplified block model, and a planar or surface projected version. Lower detail versions are considered as compatibility version for 2D systems while higher detail models are suitable for 3D analysis and visualization. The proposed levels of detail are matched with CityGML Levels of Detail, enabling both analysis and aesthetic views for urban modelling.

  14. Geometric Modelling of Tree Roots with Different Levels of Detail

    Science.gov (United States)

    Guerrero Iñiguez, J. I.

    2017-09-01

    This paper presents a geometric approach for modelling tree roots with different Levels of Detail, suitable for analysis of the tree anchoring, potentially occupied underground space, interaction with urban elements and damage produced and taken in the built-in environment. Three types of tree roots are considered to cover several species: tap root, heart shaped root and lateral roots. Shrubs and smaller plants are not considered, however, a similar approach can be considered if the information is available for individual species. The geometrical approach considers the difficulties of modelling the actual roots, which are dynamic and almost opaque to direct observation, proposing generalized versions. For each type of root, different geometric models are considered to capture the overall shape of the root, a simplified block model, and a planar or surface projected version. Lower detail versions are considered as compatibility version for 2D systems while higher detail models are suitable for 3D analysis and visualization. The proposed levels of detail are matched with CityGML Levels of Detail, enabling both analysis and aesthetic views for urban modelling.

  15. Research on the Hotel Image Based on the Detail Service

    Science.gov (United States)

    Li, Ban; Shenghua, Zheng; He, Yi

    Detail service management, initially developed as marketing programs to enhance customer loyalty, has now become an important part of customer relation strategy. This paper analyzes the critical factors of detail service and its influence on the hotel image. We establish the theoretical model of influencing factors on hotel image and propose corresponding hypotheses. We use applying statistical method to test and verify the above-mentioned hypotheses. This paper provides a foundation for further study of detail service design and planning issues.

  16. Verina Morton Jones, MD.

    Science.gov (United States)

    Rishworth, Susan K

    2012-01-01

    The purpose of this historical article is to demonstrate, as the biography of Verina Morton Jones, MD, is uncovered, the difficulties inherent in researching original source material on the lives of 19th- and early 20th-century African American physicians as well as the great benefits derived from doing this research. The procedures used include basic archival research and close examination of published materials about her in the past, in conjunction with oral history. Original correspondence from Dr Morton Jones to her niece and nephew is used to illustrate events in her life and the thoughts and attitudes she expressed. Some of these thoughts and attitudes reflect those current situations in which African Americans found themselves, and others are quite unique, no doubt owing to her privileged position in the African American community. The principle conclusions reached include the great benefits derived from doing this kind of research, as difficult and time-consuming as that may be, with the enhanced knowledge and appreciation of the heritage of African American physicians, and insights into American social history during this period.

  17. Pharmaceutical drug detailing in primary care: extent and methods

    DEFF Research Database (Denmark)

    Schramm, Jesper

    The dimension and methods of pharmaceutical marketing towards 47 danish general practitioners is described. Conclusions: Pharmaceutical drug detailing possesses a huge potential to influence the prescription pattern of GP's.......The dimension and methods of pharmaceutical marketing towards 47 danish general practitioners is described. Conclusions: Pharmaceutical drug detailing possesses a huge potential to influence the prescription pattern of GP's....

  18. Bolivia-Brazil gas line route detailed

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that state oil companies of Brazil and Bolivia have signed an agreement outlining the route for a 2,270 km pipeline system to deliver natural gas from Bolivian fields to Southeast Brazil. The two sides currently are negotiating details about construction costs as well as contract volumes and prices. Capacity is projected at 283-565 MMcfd. No official details are available, but Roberto Y. Hukai, a director of the Sao Paulo engineering company Jaako Poyry/Technoplan, estimates transportation cost of the Bolivian gas at 90 cents/MMBTU. That would be competitive with the price of gas delivered to the Sao Paulo gas utility Comgas, he the. Brazil's Petroleos Brasileiro SA estimates construction of the pipeline on the Brazilian side alone with cost $1.2-1.4 billion. Bolivia's Yacimientos Petroliferos Fiscales Bolivianos (YPFB) is negotiating with private domestic and foreign investors for construction of the Bolivian portion of the project

  19. Detailed petrographic-structural study of an outcrop of Crystalline Basement of Montevideo

    International Nuclear Information System (INIS)

    Pascale, A.; Oyhantçabal, P.

    2010-01-01

    Preliminary data analysis of detailed outcrop Punta Virgilo, located on the S E coast of the department of Montevideo are presented. The investigated outcrop includes gneisses, amphibolite s and several generations of pegmatite and aplite dikes of Paleoproterozoic metamorphic basement, plus a set of dikes emplaced lamprófido exhumed once the area. Petrographic and microstructural studies of metamorphic units allowed to determine the conditions of metamorphism and deformation temperature between 520-720 ° C and pressure between 2 and 6 kbar (depth of 10 to 23 km)

  20. 16 CFR 1750.5 - Detailed requirements.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Detailed requirements. 1750.5 Section 1750.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION REFRIGERATOR SAFETY ACT REGULATIONS STANDARD FOR... directed perpendicularly to the plane of the door and applied anywhere along the latch edge of the inside...

  1. Airborne gamma-ray spectrometer and magnetometer survey, Durango C, Colorado. Final report Volume II A. Detail area

    International Nuclear Information System (INIS)

    1983-01-01

    Geology of Durango C detail area, radioactive mineral occurrences in Colorado, and geophysical data interpretation are included in this report. Eight appendices provide: stacked profiles, geologic histograms, geochemical histograms, speed and altitude histograms, geologic statistical tables, magnetic and ancillary profiles, and test line data

  2. Strategies for replacement of obsolete equipment, including reverse engineering

    International Nuclear Information System (INIS)

    Irish, C.S.

    2003-01-01

    The presentation shall detail the challenges facing nuclear power plants with the replacement of obsolete equipment and the strategies used to overcome those challenges. The presentation will outline the common equipment types which are either obsolete or are becoming obsolete, with a focus on safety related components. The four options of the obsolete equipment replacement philosophy will be presented with replacement examples from each of the options shown for discussion purposes. Detailed examples from each of the four obsolete equipment replacement options of, (1) commercially available equivalent component, (2) modification of a commercial available component, (3) reverse engineering of the original component and finally (4) design changes using a new component, shall be presented to evaluate the advantages and disadvantages of each option. The presentation will include the technical challenges, cost and schedule concerns for each of the four options. Emphasis will be placed on the technological challenges associated with replacing old and obsolete equipment. The following is a bullet list of the challenges which will be discussed: 1) Missing, misleading or no information on the original component. 2) Acquiring information from the original equipment manufacturer and the plant. 3) Using a sample component for the replacement evaluation and or reverse engineering. 4) Reverse engineering old equipment with newly available discrete components. The presentation will include the equivalency documentation using the EPRI guidelines when replacing an original component with a different yet form, fit and functional equivalent component. The presentation will conclude with a discussion of the advantages and disadvantages of the replacement of the obsolete component with a form, fit and functional equivalent component vs. the replacement of the original component with a new component with today's technology. (author)

  3. Specificity and detail in autobiographical memory: Same or different constructs?

    Science.gov (United States)

    Kyung, Yoonhee; Yanes-Lukin, Paula; Roberts, John E

    2016-01-01

    Research on autobiographical memory has focused on whether memories are coded as specific (i.e., describe a single event that happened at a particular time and place). Although some theory and research suggests that the amount of detail in autobiographical memories reflects a similar underlying construct as memory specificity, past research has not investigated whether these variables converge. Therefore, the present study compared the proportion of specific memories and the amount of detail embedded in memory responses to cue words. Results demonstrated that memory detail and proportion of specific memories were not correlated with each other and showed different patterns of association with other conceptually relevant variables. When responses to neutral cue words were examined in multiple linear and logistic regression analyses, the proportion of specific memories uniquely predicted less depressive symptoms, low emotional avoidance, lower emotion reactivity, better executive control and lower rumination, whereas the amount of memory detail uniquely predicted the presence of depression diagnosis, as well as greater depressive symptoms, subjective stress, emotion reactivity and rumination. Findings suggest that the ability to retrieve specific memories and the tendency to retrieve detailed personal memories reflect different constructs that have different implications in the development of emotional distress.

  4. Detailed Safety Review of Anthrax Vaccine Adsorbed

    National Research Council Canada - National Science Library

    2001-01-01

    To date, 18 human studies have assessed the safety of anthrax vaccination. These studies, some stretching back almost 50 years, reported adverse events after vaccination in varying degrees of detail...

  5. Detailed Electrochemical Characterisation of Large SOFC Stacks

    DEFF Research Database (Denmark)

    Mosbæk, Rasmus Rode; Hjelm, Johan; Barfod, R.

    2012-01-01

    application of advanced methods for detailed electrochemical characterisation during operation. An operating stack is subject to steep compositional gradients in the gaseous reactant streams, and significant temperature gradients across each cell and across the stack, which makes it a complex system...... Fuel Cell A/S was characterised in detail using electrochemical impedance spectroscopy. An investigation of the optimal geometrical placement of the current probes and voltage probes was carried out in order to minimise measurement errors caused by stray impedances. Unwanted stray impedances...... are particularly problematic at high frequencies. Stray impedances may be caused by mutual inductance and stray capacitance in the geometrical set-up and do not describe the fuel cell. Three different stack geometries were investigated by electrochemical impedance spectroscopy. Impedance measurements were carried...

  6. Detailed evaluation of ET-RR-2 neutronic design: approach to criticality

    International Nuclear Information System (INIS)

    Ashoub, N.; Amin, E.

    2000-01-01

    The ET-RR-2 safety analysis evaluation effort included the assessment of the reactor core nuclear design parameters. The present work complements the previous effort of neutronic calculations using NCNSRC computer code packages. This paper is the first in comprehensive neutronic calculation assessment up to the equilibrium core. It deals with evaluation of neutronic calculation submitted during the early phase of the licensing process; namely the proposal to assemble the first critical core, calculation of power peaking factor and determination of detailed energy group flux distribution in the core particularly in the cobalt irradiation position. The neutronic design criteria are examined qualitatively and quantitatively in the present paper

  7. Study on Detailing Design of Precast Concrete Frame Structure

    Science.gov (United States)

    Lida, Tian; Liming, Li; Kang, Liu; Jiao, Geng; Ming, Li

    2018-03-01

    Taking a certain precast concrete frame structure as an example, this paper introduces the general procedures and key points in detailing design of emulative cast-in-place prefabricated structure from the aspects of structural scheme, precast element layout, shop drawing design and BIM 3D modelling. This paper gives a practical solution for the detailing design of precast concrete frame structure under structural design codes in China.

  8. Cleaner combustion developing detailed chemical kinetic models

    CERN Document Server

    Battin-Leclerc, Frédérique; Simmie, John M

    2013-01-01

    This book describes the reactive chemistry of minor pollutants within extensively validated detailed mechanisms for traditional fuels, and also for innovative surrogates, describing the complex chemistry of new, environmentally important bio-fuels.

  9. Airborne gamma-ray spectrometer and magnetometer survey, Durango B, Colorado. Final report Volume II A. Detail area

    International Nuclear Information System (INIS)

    1983-01-01

    The geology of the Durango B detail area, the radioactive mineral occurrences in Colorado and the geophysical data interpretation are included in this report. Seven appendices contain: stacked profiles, geologic histograms, geochemical histograms, speed and altitude histograms, geologic statistical tables, geochemical statistical tables, and test line data

  10. Detailed Performance Assessment for the ITER ECE Diagnostic

    Science.gov (United States)

    Rowan, W.; Austin, M.; Houshmandyar, S.; Phillips, P.; Beno, J.; Bryant, A.; Ouroua, A.; Weeks, D.; Hubbard, A.; Taylor, G.

    2017-10-01

    One of the primary diagnostics for electron temperature (Te) measurement on ITER is based on the detection of electron cyclotron emission (ECE) Here we describe the predicted performance of the newly completed ECE diagnostic design by quantitatively following the emission from the plasma to the instruments and including the calibration method to assess accuracy. Operation of the diagnostic at 5.3 T is the main interest here but critical features of the emission spectra for 2.65 T and 1.8 T will be described. ECE will be collected by two very similar optical systems: one a radial view, the other an oblique view. Both measurements are used for Te while the oblique view also allows detection of non-thermal distortion in the electron distribution. An in-vacuum calibration source is included in the front end of each view to calibrate out the effect of any degradation of in-vessel optics. Following collection, the emission is split into orthogonal polarizations and transmitted to the detection instruments via waveguides filled with dry nitrogen, a choice that simplifies construction and analysis. Near the instruments, a switchyard is used to select which polarization and view is detected by each instrument. The design for the radiometer used for 5.3 T will be described in detail. Supported by PPPL/US-DA via subcontract S013464-H to UT Austin.

  11. MIDA: A Multimodal Imaging-Based Detailed Anatomical Model of the Human Head and Neck.

    Directory of Open Access Journals (Sweden)

    Maria Ida Iacono

    Full Text Available Computational modeling and simulations are increasingly being used to complement experimental testing for analysis of safety and efficacy of medical devices. Multiple voxel- and surface-based whole- and partial-body models have been proposed in the literature, typically with spatial resolution in the range of 1-2 mm and with 10-50 different tissue types resolved. We have developed a multimodal imaging-based detailed anatomical model of the human head and neck, named "MIDA". The model was obtained by integrating three different magnetic resonance imaging (MRI modalities, the parameters of which were tailored to enhance the signals of specific tissues: i structural T1- and T2-weighted MRIs; a specific heavily T2-weighted MRI slab with high nerve contrast optimized to enhance the structures of the ear and eye; ii magnetic resonance angiography (MRA data to image the vasculature, and iii diffusion tensor imaging (DTI to obtain information on anisotropy and fiber orientation. The unique multimodal high-resolution approach allowed resolving 153 structures, including several distinct muscles, bones and skull layers, arteries and veins, nerves, as well as salivary glands. The model offers also a detailed characterization of eyes, ears, and deep brain structures. A special automatic atlas-based segmentation procedure was adopted to include a detailed map of the nuclei of the thalamus and midbrain into the head model. The suitability of the model to simulations involving different numerical methods, discretization approaches, as well as DTI-based tensorial electrical conductivity, was examined in a case-study, in which the electric field was generated by transcranial alternating current stimulation. The voxel- and the surface-based versions of the models are freely available to the scientific community.

  12. Detailed mechanical design of the LIPAc beam dump radiological shielding

    Energy Technology Data Exchange (ETDEWEB)

    Nomen, Oriol, E-mail: onomen@irec.cat [IREC, Barcelona, Catalonia (Spain); CDEI-UPC, Barcelona, Catalonia (Spain); Martínez, José I.; Arranz, Fernando; Iglesias, Daniel; Barrera, Germán; Brañas, Beatriz [CIEMAT, Madrid (Spain); Ogando, Francisco [UNED, Madrid (Spain); Molla, Joaquín [CIEMAT, Madrid (Spain); Sanmartí, Manel [IREC, Barcelona, Catalonia (Spain)

    2013-10-15

    Highlights: ► Mechanical design of the IFMIF LIPAc beam dump shielding has been performed. ► Lead shutter design performed to shield radiation from beam dump when LIPAc is off. ► External loads, working and dismantling conditions, included as design constraints. -- Abstract: The LIPAc is a 9 MeV, D{sup +} linear prototype accelerator for the validation of the IFMIF accelerator design. The high intensity, 125 mA CW beam is stopped in a copper cone involving a high production of neutrons and gamma radiation and activation of its surface. The beam stopper is surrounded by a shielding to attenuate the resulting radiation so that dose rate values comply with the limits at the different zones of the installation. The shielding includes for that purpose polyethylene rings, water tanks and gray cast iron rings. A lead shutter has also been designed to shield the gamma radiation that comes through the beam tube when the linear accelerator is not in operation, in order to allow access inside the building for maintenance tasks. The present work summarizes the detailed mechanical design of the beam dump shielding and the lead shutter taking into account the design constraints, such as working conditions and other external loads, as well as including provisions for dismantling.

  13. Space Telecommunications Radio System (STRS) Architecture, Tutorial Part 2 - Detailed

    Science.gov (United States)

    Handler, Louis

    2014-01-01

    The STRS architecture detail presentation presents each requirement in the STRS Architecture Standard with some examples and supporting information. The purpose is to give a platform provider, application provider, or application integrator a better, more detailed understanding of the STRS Architecture Standard and its use.

  14. 46 CFR 160.013-3 - Materials, workmanship, and construction details.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Materials, workmanship, and construction details. 160.013-3 Section 160.013-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT... materials, workmanship, and construction details shall be in substantial compliance with the provisions of...

  15. Detailed Design Documentation, without the Pain

    Science.gov (United States)

    Ramsay, C. D.; Parkes, S.

    2004-06-01

    Producing detailed forms of design documentation, such as pseudocode and structured flowcharts, to describe the procedures of a software system:(1) allows software developers to model and discuss their understanding of a problem and the design of a solution free from the syntax of a programming language,(2) facilitates deeper involvement of non-technical stakeholders, such as the customer or project managers, whose influence ensures the quality, correctness and timeliness of the resulting system,(3) forms comprehensive documentation of the system for its future maintenance, reuse and/or redeployment.However, such forms of documentation require effort to create and maintain.This paper describes a software tool which is currently being developed within the Space Systems Research Group at the University of Dundee which aims to improve the utility of, and the incentive for, creating detailed design documentation for the procedures of a software system. The rationale for creating such a tool is briefly discussed, followed by a description of the tool itself, a summary of its perceived benefits, and plans for future work.

  16. Lady Mary Sidney Herbert a Lady Mary Wroth: labutí píseň a imaginativní svět jako součást rodinného odkazu (Lady Mary Sidney Herbert and Lady Mary Wroth: a Swan song and Fictional World as a part of Sidneyan legacy

    Directory of Open Access Journals (Sweden)

    Martina Kastnerová

    2017-03-01

    Full Text Available The study intends to clarify the process of forming of Sidneyan literary cult as a part of (Sidneyʼs family legacy based on the the literary activities of Sidneyʼs sister Lady Mary Sidney Herbert, countess of Pembroke, and his niece Lady Mary Wroth, daughter of his younger brother Robert. Mary Sidney Herbert throughout her literary career sings a swan song of her brother, Mary Wroth creates an imaginative world of free love choice and happy endings and her literary career is based on the well-established cult of Sidneyʼs name.

  17. Optoelectronic pH Meter: Further Details

    Science.gov (United States)

    Jeevarajan, Antony S.; Anderson, Mejody M.; Macatangay, Ariel V.

    2009-01-01

    A collection of documents provides further detailed information about an optoelectronic instrument that measures the pH of an aqueous cell-culture medium to within 0.1 unit in the range from 6.5 to 7.5. The instrument at an earlier stage of development was reported in Optoelectronic Instrument Monitors pH in a Culture Medium (MSC-23107), NASA Tech Briefs, Vol. 28, No. 9 (September 2004), page 4a. To recapitulate: The instrument includes a quartz cuvette through which the medium flows as it is circulated through a bioreactor. The medium contains some phenol red, which is an organic pH-indicator dye. The cuvette sits between a light source and a photodetector. [The light source in the earlier version comprised red (625 nm) and green (558 nm) light-emitting diodes (LEDs); the light source in the present version comprises a single green- (560 nm)-or-red (623 nm) LED.] The red and green are repeatedly flashed in alternation. The responses of the photodiode to the green and red are processed electronically to obtain the ratio between the amounts of green and red light transmitted through the medium. The optical absorbance of the phenol red in the green light varies as a known function of pH. Hence, the pH of the medium can be calculated from the aforesaid ratio.

  18. Usher syndrome type 2 caused by activation of an USH2A pseudoexon: implications for diagnosis and therapy.

    Science.gov (United States)

    Vaché, Christel; Besnard, Thomas; le Berre, Pauline; García-García, Gema; Baux, David; Larrieu, Lise; Abadie, Caroline; Blanchet, Catherine; Bolz, Hanno Jörn; Millan, Jose; Hamel, Christian; Malcolm, Sue; Claustres, Mireille; Roux, Anne-Françoise

    2012-01-01

    USH2A sequencing in three affected members of a large family, referred for the recessive USH2 syndrome, identified a single pathogenic alteration in one of them and a different mutation in the two affected nieces. As the patients carried a common USH2A haplotype, they likely shared a mutation not found by standard sequencing techniques. Analysis of RNA from nasal cells in one affected individual identified an additional pseudoexon (PE) resulting from a deep intronic mutation. This was confirmed by minigene assay. This is the first example in Usher syndrome (USH) with a mutation causing activation of a PE. The finding of this alteration in eight other individuals of mixed European origin emphasizes the importance of including RNA analysis in a comprehensive diagnostic service. Finally, this mutation, which would not have been found by whole-exome sequencing, could offer, for the first time in USH, the possibility of therapeutic correction by antisense oligonucleotides (AONs). © 2011 Wiley Periodicals, Inc.

  19. Generic Reliability-Based Inspection Planning for Fatigue Sensitive Details

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Straub, Daniel; Faber, Michael Havbro

    2005-01-01

    of fatigue sensitive details in fixed offshore steel jacket platforms and FPSO ship structures. Inspection and maintenance activities are planned such that code based requirements to the safety of personnel and environment for the considered structure are fulfilled and at the same time such that the overall......The generic approach for planning of in-service NDT inspections is extended to cover the case where the fatigue load is modified during the design lifetime of the structure. Generic reliability-based inspection planning has been developed as a practical approach to perform inspection planning...... expected costs for design, inspections, repairs and failures are minimized. The method is based on the assumption of “no-finds” of cracks during inspections. Each fatigue sensitive detail is categorized according to their type of details (SN curves), FDF values, RSR values, inspection, repair and failure...

  20. Detailed Physical Trough Model for NREL's Solar Advisor Model: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, M. J.; Blair, N.; Dobos, A.

    2010-10-01

    Solar Advisor Model (SAM) is a free software package made available by the National Renewable Energy Laboratory (NREL), Sandia National Laboratory, and the US Department of Energy. SAM contains hourly system performance and economic models for concentrating solar power (CSP) systems, photovoltaic, solar hot-water, and generic fuel-use technologies. Versions of SAM prior to 2010 included only the parabolic trough model based on Excelergy. This model uses top-level empirical performance curves to characterize plant behavior, and thus is limited in predictive capability for new technologies or component configurations. To address this and other functionality challenges, a new trough model; derived from physical first principles was commissioned to supplement the Excelergy-based empirical model. This new 'physical model' approaches the task of characterizing the performance of the whole parabolic trough plant by replacing empirical curve-fit relationships with more detailed calculations where practical. The resulting model matches the annual performance of the SAM empirical model (which has been previously verified with plant data) while maintaining run-times compatible with parametric analysis, adding additional flexibility in modeled system configurations, and providing more detailed performance calculations in the solar field, power block, piping, and storage subsystems.

  1. Transient Studies in Large Offshore Wind Farms, Employing Detailed Circuit Breaker Representation

    DEFF Research Database (Denmark)

    Glasdam, Jakob Bærholm; Bak, Claus Leth; Hjerrild, Jesper

    2012-01-01

    in order to ensure reliable switching operations. Transient measurement results in an OWF are compared with simulation results in PSCAD EMTDC and DigSILENT Power Factory. A user-defined model of the vacuum circuit breaker (VCB) is included in both tools, capable of simulating multiple prestrikes during...... greatly improves the simulation results, whereas little improvement is found in DigSILENT. Based on the transient study it is found that the simulated SOV can be up to 60% higher at the sending end when using the detailed VCB representation compared to the built-in switch, which emphasises the need...

  2. Atmosphere-soil-vegetation model including CO2 exchange processes: SOLVEG2

    International Nuclear Information System (INIS)

    Nagai, Haruyasu

    2004-11-01

    A new atmosphere-soil-vegetation model named SOLVEG2 (SOLVEG version 2) was developed to study the heat, water, and CO 2 exchanges between the atmosphere and land-surface. The model consists of one-dimensional multilayer sub-models for the atmosphere, soil, and vegetation. It also includes sophisticated processes for solar and long-wave radiation transmission in vegetation canopy and CO 2 exchanges among the atmosphere, soil, and vegetation. Although the model usually simulates only vertical variation of variables in the surface-layer atmosphere, soil, and vegetation canopy by using meteorological data as top boundary conditions, it can be used by coupling with a three-dimensional atmosphere model. In this paper, details of SOLVEG2, which includes the function of coupling with atmosphere model MM5, are described. (author)

  3. Quantum Effect in a Diode Included Nonlinear Inductance-Capacitance Mesoscopic Circuit

    International Nuclear Information System (INIS)

    Yan Zhanyuan; Zhang Xiaohong; Ma Jinying

    2009-01-01

    The mesoscopic nonlinear inductance-capacitance circuit is a typical anharmonic oscillator, due to diodes included in the circuit. In this paper, using the advanced quantum theory of mesoscopic circuits, which based on the fundamental fact that the electric charge takes discrete value, the diode included mesoscopic circuit is firstly studied. Schroedinger equation of the system is a four-order difference equation in p-circumflex representation. Using the extended perturbative method, the detail energy spectrum and wave functions are obtained and verified, as an application of the results, the current quantum fluctuation in the ground state is calculated. Diode is a basis component in a circuit, its quantization would popularize the quantum theory of mesoscopic circuits. The methods to solve the high order difference equation are helpful to the application of mesoscopic quantum theory.

  4. Batteries not included

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, M.

    2001-09-08

    This article traces the development of clockwork wind-up battery chargers that can be used to recharge mobile phones, laptop computers, torches or radio batteries from the pioneering research of the British inventor Trevor Baylis to the marketing of the wind-up gadgets by Freeplay Energy who turned the idea into a commercial product. The amount of cranking needed to power wind-up devices is discussed along with a hand-cranked charger for mobile phones, upgrading the phone charger's mechanism, and drawbacks of the charger. Details are given of another invention using a hand-cranked generator with a supercapacitor as a storage device which has a very much higher capacity for storing electrical charge.

  5. Batteries not included

    International Nuclear Information System (INIS)

    Cooper, M.

    2001-01-01

    This article traces the development of clockwork wind-up battery chargers that can be used to recharge mobile phones, laptop computers, torches or radio batteries from the pioneering research of the British inventor Trevor Baylis to the marketing of the wind-up gadgets by Freeplay Energy who turned the idea into a commercial product. The amount of cranking needed to power wind-up devices is discussed along with a hand-cranked charger for mobile phones, upgrading the phone charger's mechanism, and drawbacks of the charger. Details are given of another invention using a hand-cranked generator with a supercapacitor as a storage device which has a very much higher capacity for storing electrical charge

  6. A model for determining the scope and level of detail that is appropriate for a programmatic EIS

    International Nuclear Information System (INIS)

    Eccleston, C.H.

    1995-03-01

    Since the inception of the National Environmental Policy Act (NEPA), no definitive guidance has been established for determining the scope of topics and issues, or the level of detail suitable for presentation within a Programmatic Environmental Impact Statement (P-EIS). Lacking such guidance, an inordinate amount of time and resources can be expended in determining the scope that is most appropriately addressed within a P-EIS versus the more detailed scope that is best reserved for lower-tier documents. Faced with this predicament, agencies often err on the side of including too much detail, resulting in P-EISs that are over bloated and unnecessarily complex. Moreover, lack of definitive guidance leads to a great deal of inconsistency in the preparation of P-EISs among federal agency programs. A paradigm for assisting decisionmakers in making such determinations is presented below. This model expedites the preparation of P-EISs by providing a consistent and systematic approach for determining the scope and level of detail that is most appropriately addressed at the programmatic level. In many cases, the model provides agencies with an effective tool for managing and streamlining the NEPA process by de-scoping needless and unnecessary issues from the scope of a P-EIS

  7. Details

    Indian Academy of Sciences (India)

    teju

    2018-05-04

    May 4, 2018 ... ... selected candidate is required to work with Accounts Officer and assist in ... in website of Public Financial Management System etc., and carry out .... Duties also include coordination and liaison with Chief Editors and other ...

  8. Collaborative recall of details of an emotional film.

    Science.gov (United States)

    Wessel, Ineke; Zandstra, Anna Roos E; Hengeveld, Hester M E; Moulds, Michelle L

    2015-01-01

    Collaborative inhibition refers to the phenomenon that when several people work together to produce a single memory report, they typically produce fewer items than when the unique items in the individual reports of the same number of participants are combined (i.e., nominal recall). Yet, apart from this negative effect, collaboration may be beneficial in that group members remove errors from a collaborative report. Collaborative inhibition studies on memory for emotional stimuli are scarce. Therefore, the present study examined both collaborative inhibition and collaborative error reduction in the recall of the details of emotional material in a laboratory setting. Female undergraduates (n = 111) viewed a film clip of a fatal accident and subsequently engaged in either collaborative (n = 57) or individual recall (n = 54) in groups of three. The results show that, across several detail categories, collaborating groups recalled fewer details than nominal groups. However, overall, nominal recall produced more errors than collaborative recall. The present results extend earlier findings on both collaborative inhibition and error reduction to the recall of affectively laden material. These findings may have implications for the applied fields of forensic and clinical psychology.

  9. Detailed model for practical pulverized coal furnaces and gasifiers

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P.J.; Smoot, L.D.

    1989-08-01

    This study has been supported by a consortium of nine industrial and governmental sponsors. Work was initiated on May 1, 1985 and completed August 31, 1989. The central objective of this work was to develop, evaluate and apply a practical combustion model for utility boilers, industrial furnaces and gasifiers. Key accomplishments have included: Development of an advanced first-generation, computer model for combustion in three dimensional furnaces; development of a new first generation fouling and slagging submodel; detailed evaluation of an existing NO{sub x} submodel; development and evaluation of an improved radiation submodel; preparation and distribution of a three-volume final report: (a) Volume 1: General Technical Report; (b) Volume 2: PCGC-3 User's Manual; (c) Volume 3: Data Book for Evaluation of Three-Dimensional Combustion Models; and organization of a user's workshop on the three-dimensional code. The furnace computer model developed under this study requires further development before it can be applied generally to all applications; however, it can be used now by specialists for many specific applications, including non-combusting systems and combusting geseous systems. A new combustion center was organized and work was initiated to continue the important research effort initiated by this study. 212 refs., 72 figs., 38 tabs.

  10. Exclusive queueing model including the choice of service windows

    Science.gov (United States)

    Tanaka, Masahiro; Yanagisawa, Daichi; Nishinari, Katsuhiro

    2018-01-01

    In a queueing system involving multiple service windows, choice behavior is a significant concern. This paper incorporates the choice of service windows into a queueing model with a floor represented by discrete cells. We contrived a logit-based choice algorithm for agents considering the numbers of agents and the distances to all service windows. Simulations were conducted with various parameters of agent choice preference for these two elements and for different floor configurations, including the floor length and the number of service windows. We investigated the model from the viewpoint of transit times and entrance block rates. The influences of the parameters on these factors were surveyed in detail and we determined that there are optimum floor lengths that minimize the transit times. In addition, we observed that the transit times were determined almost entirely by the entrance block rates. The results of the presented model are relevant to understanding queueing systems including the choice of service windows and can be employed to optimize facility design and floor management.

  11. The yield of high-detail radiographic skeletal surveys in suspected infant abuse

    International Nuclear Information System (INIS)

    Barber, Ignasi; Perez-Rossello, Jeannette M.; Kleinman, Paul K.; Wilson, Celeste R.

    2015-01-01

    Skeletal surveys are routinely performed in cases of suspected child abuse, but there are limited data regarding the yield of high-detail skeletal surveys in infants. To determine the diagnostic yield of high-detail radiographic skeletal surveys in suspected infant abuse. We reviewed the high-detail American College of Radiology standardized skeletal surveys performed for suspected abuse in 567 infants (median: 4.4 months, SD 3.47; range: 4 days-12 months) at a large urban children's hospital between 2005 and 2013. Skeletal survey images, radiology reports and medical records were reviewed. A skeletal survey was considered positive when it showed at least one unsuspected fracture. In 313 of 567 infants (55%), 1,029 definite fractures were found. Twenty-one percent (119/567) of the patients had a positive skeletal survey with a total of 789 (77%) unsuspected fractures. Long-bone fractures were the most common injuries, present in 145 children (26%). The skull was the site of fracture in 138 infants (24%); rib cage in 77 (14%), clavicle in 24 (4.2%) and uncommon fractures (including spine, scapula, hands and feet and pelvis) were noted in 26 infants (4.6%). Of the 425 infants with neuroimaging, 154 (36%) had intracranial injury. No significant correlation between positive skeletal survey and associated intracranial injury was found. Scapular fractures and complex skull fractures showed a statistically significant correlation with intracranial injury (P = 0.029, P = 0.007, respectively). Previously unsuspected fractures are noted on skeletal surveys in 20% of cases of suspected infant abuse. These data may be helpful in the design and optimization of global skeletal imaging in this vulnerable population. (orig.)

  12. The yield of high-detail radiographic skeletal surveys in suspected infant abuse

    Energy Technology Data Exchange (ETDEWEB)

    Barber, Ignasi [Hospital Vall d' Hebron, Universitat Autonoma de Barcelona, Pediatric Radiology Department, Barcelona (Spain); Perez-Rossello, Jeannette M.; Kleinman, Paul K. [Boston Children' s Hospital, Radiology Department, Boston, MA (United States); Wilson, Celeste R. [Boston Children' s Hospital, Division of General Pediatrics, Boston, MA (United States)

    2014-07-06

    Skeletal surveys are routinely performed in cases of suspected child abuse, but there are limited data regarding the yield of high-detail skeletal surveys in infants. To determine the diagnostic yield of high-detail radiographic skeletal surveys in suspected infant abuse. We reviewed the high-detail American College of Radiology standardized skeletal surveys performed for suspected abuse in 567 infants (median: 4.4 months, SD 3.47; range: 4 days-12 months) at a large urban children's hospital between 2005 and 2013. Skeletal survey images, radiology reports and medical records were reviewed. A skeletal survey was considered positive when it showed at least one unsuspected fracture. In 313 of 567 infants (55%), 1,029 definite fractures were found. Twenty-one percent (119/567) of the patients had a positive skeletal survey with a total of 789 (77%) unsuspected fractures. Long-bone fractures were the most common injuries, present in 145 children (26%). The skull was the site of fracture in 138 infants (24%); rib cage in 77 (14%), clavicle in 24 (4.2%) and uncommon fractures (including spine, scapula, hands and feet and pelvis) were noted in 26 infants (4.6%). Of the 425 infants with neuroimaging, 154 (36%) had intracranial injury. No significant correlation between positive skeletal survey and associated intracranial injury was found. Scapular fractures and complex skull fractures showed a statistically significant correlation with intracranial injury (P = 0.029, P = 0.007, respectively). Previously unsuspected fractures are noted on skeletal surveys in 20% of cases of suspected infant abuse. These data may be helpful in the design and optimization of global skeletal imaging in this vulnerable population. (orig.)

  13. Detailed analysis of the scope of the modified Firsov model

    International Nuclear Information System (INIS)

    Cruz, S.A.; Vargas-Aburto, C.; Brice, D.K.; Alonso, E.V.; Armour, D.G.

    1983-01-01

    A detailed and systematic analysis of the scope of the Firsov model as modified by Cheshire when no adjustable parameters are included in the calculations of the low-velocity electronic-stopping cross section is presented. For this purpose we summarize and extend our previously reported [Radiat. Eff. Lett. 43, 79 (1979); Nucl. Instrum. Methods 170, 205 (1980)] preliminary results on the role of all computational degrees of freedom that influence the outcome of the calculations, namely, (a) inclusion of trajectory, (b) accuracy of wave functions and speed of atomic electrons, (c) motion of Firsov's plane, and (d) consideration of experimental conditions. We find that the Firsov theory is accurate only within a factor of 2; therefore, at least a scale factor is necessary in order to get reasonable agreement with experiment

  14. Photoisomerization of Stilbene: The Detailed XMCQDPT2 Treatment.

    Science.gov (United States)

    Ioffe, I N; Granovsky, A A

    2013-11-12

    We report the detailed XMCQDPT2/cc-pVTZ study of trans-cis photoisomerization in one of the core systems of both experimental and computational photochemistry-the stilbene molecule. For the first time, the potential energy surface (PES) of the S1 state has been directly optimized and scanned using a multistate multiconfiguration second-order perturbation theory. We characterize the trans-stilbene, pyramidalized (phantom), and DHP-cis-stilbene geometric domains of the S1 state and describe their stationary points including the transition states between them, as well as S1/S0 intersections. Also reported are the minima and the activation barriers in the ground state. Our calculations correctly predict the kinetic isotope effect due to H/D exchange at ethylenic hydrogens, the dynamic behavior of excited cis-stilbene, and trans-cis branching ratio after relaxation to S0 through a rather unsymmetric conical intersection. In general, the XMCQDPT2 results confirm the qualitative adequacy of the TDDFT (especially SF-TDDFT) picture of the excited stilbene but also reveal quantitative discrepancies that deserve further exploration.

  15. The detailed evaluation of supernumerary teeth with the aid of cone beam computed tomography

    International Nuclear Information System (INIS)

    Tumen, E.C.; Yavuz, I.; Atakul, F.; Tumen, D.S.; Hamamci, N.; Berber, G.; Uysal, E.

    2010-01-01

    The aim of this paper is to demonstrate the application of a recently developed three-dimensional imaging system, cone beam computed tomography, in the detailed evaluation of supernumerary teeth. Two-hundred and twenty three patients with supernumerary teeth (68 females and 155 males) were included in this study. Patients ranged in age from 12 to 25 years. Supernumerary teeth were detected by clinical examination and traditional radiographies. Moreover, careful investigation for more details was made with the cone beam computed tomography. Supernumerary teeth which were detected with the examinations of the cone beam computed tomography images were classified according to the number, location, shape and eruption rate. The prevalence of supernumerary teeth was determined to be 1.45% of the study population. Males were affected more than females in a ratio of 2.3:1. Supernumerary teeth were most frequently located in 86.2% of the cases in the maxilla; 10.1% in the mandible and 3.7% both in the maxilla and mandible. Supernumerary teeth were most commonly conical in shape (68.8%). One supernumerary tooth was present in 67.7% of the patients, 30.9% had two, and 1.4% had three supernumeraries. Definite and early diagnosis of the supernumerary teeth is very important. Detailed examinations and evaluations of these teeth with three-dimensional images is very beneficial in terms of treatment planning and preventing complications which may occur.

  16. The Amarillo National Resource Center for Plutonium. Quarterly progress detailed report, 1 November 1996--31 January 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Progress for this quarter is given for each of the following Center programs: (1) plutonium information resource; (2) advisory function (DOE and state support); (3) environmental, public health and safety; (3) communication, education, and training; and (4) nuclear and other material studies. Both summaries of the activities and detailed reports are included.

  17. Exact correlations in the Lieb-Liniger model and detailed balance out-of-equilibrium

    Directory of Open Access Journals (Sweden)

    Jacopo De Nardis, Miłosz Panfil

    2016-12-01

    Full Text Available We study the density-density correlation function of the 1D Lieb-Liniger model and obtain an exact expression for the small momentum limit of the static correlator in the thermodynamic limit. We achieve this by summing exactly over the relevant form factors of the density operator in the small momentum limit. The result is valid for any eigenstate, including thermal and non-thermal states. We also show that the small momentum limit of the dynamic structure factors obeys a generalized detailed balance relation valid for any equilibrium state.

  18. Detailed design report for an operational phase panel-closure system

    International Nuclear Information System (INIS)

    1996-01-01

    Under contract to Westinghouse Electric Corporation (Westinghouse), Waste Isolation Division (WID), IT Corporation has prepared a detailed design of a panel-closure system for the Waste Isolation Pilot Plant (WIPP). Preparation of this detailed design of an operational-phase closure system is required to support a Resource Conservation and Recovery Act (RCRA) Part B permit application and a non-migration variance petition. This report describes the detailed design for a panel-closure system specific to the WIPP site. The recommended panel-closure system will adequately isolate the waste-emplacement panels for at least 35 years. This report provides detailed design and material engineering specifications for the construction, emplacement, and interface-grouting associated with a panel-closure system at the WIPP repository, which would ensure that an effective panel-closure system is in place for at least 35 years. The panel-closure system provides assurance that the limit for the migration of volatile organic compounds (VOC) will be met at the point of compliance, the WIPP site boundary. This assurance is obtained through the inherent flexibility of the panel-closure system

  19. Model for safety reports including descriptive examples; Mall foer saekerhetsrapporter med beskrivande exempel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    Several safety reports will be produced in the process of planning and constructing the system for disposal of high-level radioactive waste in Sweden. The present report gives a model, with detailed examples, of how these reports should be organized and what steps they should include. In the near future safety reports will deal with the encapsulation plant and the repository. Later reports will treat operation of the handling systems and the repository.

  20. Application of Detailed Chemical Kinetics to Combustion Instability Modeling

    Science.gov (United States)

    2016-01-04

    Clearance Number 15692 Clearance Date 12/3/2015 14. ABSTRACT A comparison of a single step global reaction and the detailed GRI -Mech 1.2 for combustion...comparison of a single step global reaction and the detailed GRI -Mech 1.2 for com- bustion instability modeling in a methane-fueled longitudinal-mode...methane as the fuel. We use the GRI -Mech 1.2 kinetics mechanism for methane oxidation.11 The GRI -Mech 1.2 was chosen over 2.11 because the only

  1. Structural concepts and details for seismic design

    International Nuclear Information System (INIS)

    Johnson, M.W.; Smietana, E.A.; Murray, R.C.

    1991-01-01

    As a part of the DOE Natural Phenomena Hazards Program, a new manual has been developed, entitled UCRL-CR-106554, open-quotes Structural Concepts and Details for Seismic Design.close quotes This manual describes and illustrates good practice for seismic-resistant design

  2. MODEL OF THE TOKAMAK EDGE DENSITY PEDESTAL INCLUDING DIFFUSIVE NEUTRALS

    International Nuclear Information System (INIS)

    BURRELL, K.H.

    2003-01-01

    OAK-B135 Several previous analytic models of the tokamak edge density pedestal have been based on diffusive transport of plasma plus free-streaming of neutrals. This latter neutral model includes only the effect of ionization and neglects charge exchange. The present work models the edge density pedestal using diffusive transport for both the plasma and the neutrals. In contrast to the free-streaming model, a diffusion model for the neutrals includes the effect of both charge exchange and ionization and is valid when charge exchange is the dominant interaction. Surprisingly, the functional forms for the electron and neutral density profiles from the present calculation are identical to the results of the previous analytic models. There are some differences in the detailed definition of various parameters in the solution. For experimentally relevant cases where ionization and charge exchange rate are comparable, both models predict approximately the same width for the edge density pedestal

  3. Detailed numerical simulations of laser cooling processes

    Science.gov (United States)

    Ramirez-Serrano, J.; Kohel, J.; Thompson, R.; Yu, N.

    2001-01-01

    We developed a detailed semiclassical numerical code of the forces applied on atoms in optical and magnetic fields to increase the understanding of the different roles that light, atomic collisions, background pressure, and number of particles play in experiments with laser cooled and trapped atoms.

  4. Mathematical Model of Induction Heating Processes in Axial Symmetric Inductor-Detail Systems

    Directory of Open Access Journals (Sweden)

    Maik Streblau

    2014-05-01

    Full Text Available The wide variety of models for analysis of processes in the inductor-detail systems makes it necessary to summarize them. This is a difficult task because of the variety of inductor-detail system configurations. This paper aims to present a multi physics mathematical model for complex analysis of electromagnetic and thermal fields in axial symmetric systems inductor-detail.

  5. Kinetics of ethylcyclohexane pyrolysis and oxidation: An experimental and detailed kinetic modeling study

    KAUST Repository

    Wang, Zhandong

    2015-07-01

    Ethylcyclohexane (ECH) is a model compound for cycloalkanes with long alkyl side-chains. A preliminary investigation on ECH (Wang et al., Proc. Combust. Inst., 35, 2015, 367-375) revealed that an accurate ECH kinetic model with detailed fuel consumption mechanism and aromatic growth pathways, as well as additional ECH pyrolysis and oxidation data with detailed species concentration covering a wide pressure and temperature range are required to understand the ECH combustion kinetics. In this work, the flow reactor pyrolysis of ECH at various pressures (30, 150 and 760Torr) was studied using synchrotron vacuum ultraviolet (VUV) photoionization mass spectrometry (PIMS) and gas chromatography (GC). The mole fraction profiles of numerous major and minor species were evaluated, and good agreement was observed between the PIMS and GC data sets. Furthermore, a fuel-rich burner-stabilized laminar premixed ECH/O2/Ar flame at 30Torr was studied using synchrotron VUV PIMS. A detailed kinetic model for ECH high temperature pyrolysis and oxidation was developed and validated against the pyrolysis and flame data performed in this work. Further validation of the kinetic model is presented against literature data including species concentrations in jet-stirred reactor oxidation, ignition delay times in a shock tube, and laminar flame speeds at various pressures and equivalence ratios. The model well predicts the consumption of ECH, the growth of aromatics, and the global combustion properties. Reaction flux and sensitivity analysis were utilized to elucidate chemical kinetic features of ECH combustion under various reaction conditions. © 2015 The Combustion Institute.

  6. Electric fields, weighting fields, signals and charge diffusion in detectors including resistive materials

    International Nuclear Information System (INIS)

    Riegler, W.

    2016-01-01

    In this report we discuss static and time dependent electric fields in detector geometries with an arbitrary number of parallel layers of a given permittivity and weak conductivity. We derive the Green's functions i.e. the field of a point charge, as well as the weighting fields for readout pads and readout strips in these geometries. The effect of 'bulk' resistivity on electric fields and signals is investigated. The spreading of charge on thin resistive layers is also discussed in detail, and the conditions for allowing the effect to be described by the diffusion equation is discussed. We apply the results to derive fields and induced signals in Resistive Plate Chambers, MICROMEGAS detectors including resistive layers for charge spreading and discharge protection as well as detectors using resistive charge division readout like the MicroCAT detector. We also discuss in detail how resistive layers affect signal shapes and increase crosstalk between readout electrodes.

  7. Electric fields, weighting fields, signals and charge diffusion in detectors including resistive materials

    CERN Document Server

    Riegler, Werner

    2016-11-07

    In this report we discuss static and time dependent electric fields in detector geometries with an arbitrary number of parallel layers of a given permittivity and weak conductivity. We derive the Green's functions i.e. the field of a point charge, as well as the weighting fields for readout pads and readout strips in these geometries. The effect of 'bulk' resistivity on electric fields and signals is investigated. The spreading of charge on thin resistive layers is also discussed in detail, and the conditions for allowing the effect to be described by the diffusion equation is discussed. We apply the results to derive fields and induced signals in Resistive Plate Chambers, Micromega detectors including resistive layers for charge spreading and discharge protection as well as detectors using resistive charge division readout like the MicroCAT detector. We also discuss in detail how resistive layers affect signal shapes and increase crosstalk between readout electrodes.

  8. Characteristics of physicians targeted by the pharmaceutical industry to participate in e-detailing.

    Science.gov (United States)

    Alkhateeb, Fadi M; Khanfar, Nile M; Doucette, William R; Loudon, David

    2009-01-01

    Electronic detailing (e-detailing) has been introduced in the last few years by the pharmaceutical industry as a new communication channel through which to promote pharmaceutical products to physicians. E-detailing involves using digital technology, such as Internet, video conferencing, and interactive voice response, by which drug companies target their marketing efforts toward specific physicians with pinpoint accuracy. A mail survey of 671 Iowa physicians was used to gather information about the physician characteristics and practice setting characteristics of those who are usually targeted by pharmaceutical companies to participate in e-detailing. A model is developed and tested to explain firms' targeting strategy for targeting physicians for e-detailing.

  9. Detailed Characterization of Human Induced Pluripotent Stem Cells Manufactured for Therapeutic Applications.

    Science.gov (United States)

    Baghbaderani, Behnam Ahmadian; Syama, Adhikarla; Sivapatham, Renuka; Pei, Ying; Mukherjee, Odity; Fellner, Thomas; Zeng, Xianmin; Rao, Mahendra S

    2016-08-01

    We have recently described manufacturing of human induced pluripotent stem cells (iPSC) master cell banks (MCB) generated by a clinically compliant process using cord blood as a starting material (Baghbaderani et al. in Stem Cell Reports, 5(4), 647-659, 2015). In this manuscript, we describe the detailed characterization of the two iPSC clones generated using this process, including whole genome sequencing (WGS), microarray, and comparative genomic hybridization (aCGH) single nucleotide polymorphism (SNP) analysis. We compare their profiles with a proposed calibration material and with a reporter subclone and lines made by a similar process from different donors. We believe that iPSCs are likely to be used to make multiple clinical products. We further believe that the lines used as input material will be used at different sites and, given their immortal status, will be used for many years or even decades. Therefore, it will be important to develop assays to monitor the state of the cells and their drift in culture. We suggest that a detailed characterization of the initial status of the cells, a comparison with some calibration material and the development of reporter sublcones will help determine which set of tests will be most useful in monitoring the cells and establishing criteria for discarding a line.

  10. Simulation of flame-vortex interaction using detailed and reduced

    Energy Technology Data Exchange (ETDEWEB)

    Hilka, M. [Gaz de France (GDF), 75 - Paris (France); Veynante, D. [Ecole Centrale de Paris, Laboratoire EM2C. CNRS, 92 - Chatenay-Malabry (France); Baum, M. [CERFACS (France); Poinsot, T.J. [Centre National de la Recherche Scientifique (CNRS), 45 - Orleans-la-Source (France). Institut de Mecanique des Fluides de Toulouse

    1996-12-31

    The interaction between a pair of counter-rotating vortices and a lean premixed CH{sub 4}/O{sub 2}/N{sub 2} flame ({Phi} = + 0.55) has been studied by direct numerical simulations using detailed and reduced chemical reaction schemes. Results from the complex chemistry simulation are discussed with respect to earlier experiments and differences in the simulations using detailed and reduces chemistry are investigated. Transient evolutions of the flame surface and the total heat release rate are compared and modifications in the evolution of the local flame structure are displayed. (authors) 22 refs.

  11. A comprehensive detailed kinetic mechanism for the simulation of transportation fuels

    KAUST Repository

    Mehl, Marco; Zhang, Kuiwen; Wagnon, Scott; Kukkadapu, Goutham; Westbrook, Charles K.; Pitz, William J.; Zhang, Yinjia; Curran, Henry J.; Al Rachidi, Mariam; Atef, Nour; Sarathy, Mani; Ahmed, Ahfaz

    2017-01-01

    This work presents a recently compiled comprehensive model for transportations fuels resulting from the collaboration of three research groups: LLNL, NUI Galway and KAUST. In the past 5 years new fundamental calculations led to significant improvements in the fidelity of detailed kinetic models of important surrogate components (e.g. n-heptane, iso-octane, toluene…) improving predictions of the combustion behavior of pure components and mixtures. By extending the newly adopted reaction rate rules, mechanisms for components that were not included in the previous LLNL gasoline and diesel surrogate mechanisms were developed (e.g. polyalkylated aromatics, cycloalkanes, components from bio-logical sources…). The major features of this updated and extended model are presented together with validation comparisons, examples of applications and future directions.

  12. A comprehensive detailed kinetic mechanism for the simulation of transportation fuels

    KAUST Repository

    Mehl, Marco

    2017-02-27

    This work presents a recently compiled comprehensive model for transportations fuels resulting from the collaboration of three research groups: LLNL, NUI Galway and KAUST. In the past 5 years new fundamental calculations led to significant improvements in the fidelity of detailed kinetic models of important surrogate components (e.g. n-heptane, iso-octane, toluene…) improving predictions of the combustion behavior of pure components and mixtures. By extending the newly adopted reaction rate rules, mechanisms for components that were not included in the previous LLNL gasoline and diesel surrogate mechanisms were developed (e.g. polyalkylated aromatics, cycloalkanes, components from bio-logical sources…). The major features of this updated and extended model are presented together with validation comparisons, examples of applications and future directions.

  13. 9RU2 Radiological protection, attention to the detail-EPU

    International Nuclear Information System (INIS)

    Padilla C, I.

    2008-01-01

    To optimize times and movements in a reload project of nuclear fuel in a nuclear plant, where they are programmed more three thousand maintenance activities, modifications, monitoring and inspection in a smaller period to 30 days, and additionally to optimize the individual and collective dose in the same one, turn out to be important challenges where the used strategies must be accompanied of a deep knowledge of the installation in the radiological sense and of the spaces conceptualized in the time. The attention to the detail makes possible that the objectives are fulfilled. During the shutdown of reload 9 of Unit 2 (9RU2) of the nuclear power plant of Laguna Verde, the attention in detail applied in the critical points allowed a saving of dose of 0.7 Sv-person and one deviation of the goal of only +0.85% (smaller to 1% of the goal established like 2 challenge of Sv-person). Analysis of times, movements and training to develop skills in inspection activities in service that requires intervention in the external surface of the reactor vessel to examine the condition of welds, allowed reducing times of execution of 12 to 2 hours. Analysis of the environment and attention to the detail are techniques that allowed optimizing dose in 9RU2 and they were used in the project Power Increase. In this work the strategies of the surroundings and attention in detail applied in 9RU2 would appear and detail attention in the increase of power in the reload 13 Unit 1. (Author)

  14. Genetic relationships between detailed reproductive traits and performance traits in Holstein-Friesian dairy cattle.

    Science.gov (United States)

    Carthy, T R; Ryan, D P; Fitzgerald, A M; Evans, R D; Berry, D P

    2016-02-01

    The objective of the study was to estimate the genetic relationships between detailed reproductive traits derived from ultrasound examination of the reproductive tract and a range of performance traits in Holstein-Friesian dairy cows. The performance traits investigated included calving performance, milk production, somatic cell score (i.e., logarithm transformation of somatic cell count), carcass traits, and body-related linear type traits. Detailed reproductive traits included (1) resumed cyclicity at the time of examination, (2) multiple ovulations, (3) early ovulation, (4) heat detection, (5) ovarian cystic structures, (6) embryo loss, and (7) uterine score, measured on a 1 (little or no fluid with normal tone) to 4 (large quantity of fluid with a flaccid tone) scale, based on the tone of the uterine wall and the quantity of fluid present in the uterus. (Co)variance components were estimated using a repeatability animal linear mixed model. Genetic merit for greater milk, fat, and protein yield was associated with a reduced ability to resume cyclicity postpartum (genetic correlations ranged from -0.25 to -0.15). Higher genetic merit for milk yield was also associated with a greater genetic susceptibility to multiple ovulations. Genetic predisposition to elevated somatic cell score was associated with a decreased likelihood of cyclicity postpartum (genetic correlation of -0.32) and a greater risk of both multiple ovulations (genetic correlation of 0.25) and embryo loss (genetic correlation of 0.32). Greater body condition score was genetically associated with an increased likelihood of resumption of cyclicity postpartum (genetic correlation of 0.52). Genetically heavier, fatter carcasses with better conformation were also associated with an increased likelihood of resumed cyclicity by the time of examination (genetic correlations ranged from 0.24 to 0.41). Genetically heavier carcasses were associated with an inferior uterine score as well as a greater

  15. Evaluation of a software package for automated quality assessment of contrast detail images-comparison with subjective visual assessment

    International Nuclear Information System (INIS)

    Pascoal, A; Lawinski, C P; Honey, I; Blake, P

    2005-01-01

    Contrast detail analysis is commonly used to assess image quality (IQ) associated with diagnostic imaging systems. Applications include routine assessment of equipment performance and optimization studies. Most frequently, the evaluation of contrast detail images involves human observers visually detecting the threshold contrast detail combinations in the image. However, the subjective nature of human perception and the variations in the decision threshold pose limits to the minimum image quality variations detectable with reliability. Objective methods of assessment of image quality such as automated scoring have the potential to overcome the above limitations. A software package (CDRAD analyser) developed for automated scoring of images produced with the CDRAD test object was evaluated. Its performance to assess absolute and relative IQ was compared with that of an average observer. Results show that the software does not mimic the absolute performance of the average observer. The software proved more sensitive and was able to detect smaller low-contrast variations. The observer's performance was superior to the software's in the detection of smaller details. Both scoring methods showed frequent agreement in the detection of image quality variations resulting from changes in kVp and KERMA detector , which indicates the potential to use the software CDRAD analyser for assessment of relative IQ

  16. Interactive 3D audio: Enhancing awareness of details in immersive soundscapes?

    DEFF Research Database (Denmark)

    Schmidt, Mikkel Nørgaard; Schwartz, Stephen; Larsen, Jan

    2012-01-01

    Spatial audio and the possibility of interacting with the audio environment is thought to increase listeners' attention to details in a soundscape. This work examines if interactive 3D audio enhances listeners' ability to recall details in a soundscape. Nine different soundscapes were constructed...

  17. Detailed services in a spatial data infrastructure from the computation viewpoint

    CSIR Research Space (South Africa)

    Cooper, Antony K

    2009-11-01

    Full Text Available the detailed services that are performed within each of these components, and the roles played by these components in the different phases of establishing and using an SDI. The matrix of these detailed services is too large for inclusion in this conference...

  18. Time domain contact model for tyre/road interaction including nonlinear contact stiffness due to small-scale roughness

    Science.gov (United States)

    Andersson, P. B. U.; Kropp, W.

    2008-11-01

    Rolling resistance, traction, wear, excitation of vibrations, and noise generation are all attributes to consider in optimisation of the interaction between automotive tyres and wearing courses of roads. The key to understand and describe the interaction is to include a wide range of length scales in the description of the contact geometry. This means including scales on the order of micrometres that have been neglected in previous tyre/road interaction models. A time domain contact model for the tyre/road interaction that includes interfacial details is presented. The contact geometry is discretised into multiple elements forming pairs of matching points. The dynamic response of the tyre is calculated by convolving the contact forces with pre-calculated Green's functions. The smaller-length scales are included by using constitutive interfacial relations, i.e. by using nonlinear contact springs, for each pair of contact elements. The method is presented for normal (out-of-plane) contact and a method for assessing the stiffness of the nonlinear springs based on detailed geometry and elastic data of the tread is suggested. The governing equations of the nonlinear contact problem are solved with the Newton-Raphson iterative scheme. Relations between force, indentation, and contact stiffness are calculated for a single tread block in contact with a road surface. The calculated results have the same character as results from measurements found in literature. Comparison to traditional contact formulations shows that the effect of the small-scale roughness is large; the contact stiffness is only up to half of the stiffness that would result if contact is made over the whole element directly to the bulk of the tread. It is concluded that the suggested contact formulation is a suitable model to include more details of the contact interface. Further, the presented result for the tread block in contact with the road is a suitable input for a global tyre/road interaction model

  19. Cybercom Chief Details U.S. Cyber Threats

    Science.gov (United States)

    Security Robots Lasers RSS Feed Cybercom Chief Details U.S. Cyber Threats - December 2, 2014 Navy Adm . Rogers, the commander of U.S. Cyber Command, director of the National Security Agency and chief of the Framework for Cyber Sharing But before Cybercom can help commercial companies deal with cyber criminals and

  20. Accumulating and remembering the details of neutral and emotional natural scenes.

    Science.gov (United States)

    Melcher, David

    2010-01-01

    In contrast to our rich sensory experience with complex scenes in everyday life, the capacity of visual working memory is thought to be quite limited. Here our memory has been examined for the details of naturalistic scenes as a function of display duration, emotional valence of the scene, and delay before test. Individual differences in working memory and long-term memory for pictorial scenes were examined in experiment 1. The accumulation of memory for emotional scenes and the retention of these details in long-term memory were investigated in experiment 2. Although there were large individual differences in performance, memory for scene details generally exceeded the traditional working memory limit within a few seconds. Information about positive scenes was learned most quickly, while negative scenes showed the worst memory for details. The overall pattern of results was consistent with the idea that both short-term and long-term representations are mixed together in a medium-term 'online' memory for scenes.

  1. Unification of all elementary-particle forces including gravity

    International Nuclear Information System (INIS)

    Terazawa, Hidezumi; Chikashige, Yuichi; Matsuki, Takayuki; Akama, Keiichi.

    1978-07-01

    A unified model of the Nambu-Jona-Lasinio type for all elementary-particle forces including gravity is reviewed in some detail. Starting with a nonlinear fermion Lagrangian of the Heisenberg type and imposing the massless conditions of Bjorken on vector auxiliary fields, on effective Lagrangian is constructed, which combines the unified SU (2) x U (1) gauge theory of Weinberg and Salam for the weak and electromagnetic interactions of leptons and quarks and the Yang-Mills gauge theory of color SU (3) for the strong interaction of quarks. The photon, the weak vector bosons, and the physical Higgs scalar appear as collective excitations of lepton-antilepton or quark-antiquark pairs while the color-octet gluons appear as those of quark-antiquark pairs. The most important results of this unified model are presented. The Weinberg angle and the gluon coupling constant are determined, and the masses of the weak vector bosons are predicted. (Yoshimori, M.)

  2. Revisiting the concept level of detail in 3D city modelling

    NARCIS (Netherlands)

    Biljecki, F.; Zhao, J.; Stoter, J.E.; Ledoux, H.

    2013-01-01

    This review paper discusses the concept of level of detail in 3D city modelling, and is a first step towards a foundation for a standardised definition. As an introduction, a few level of detail specifications, outlooks and approaches are given from the industry. The paper analyses the general

  3. Moderating the Seductive Details Effect in Multimedia Learning with Note-Taking

    Science.gov (United States)

    Wang, Zhe; Sundararajan, Narayankripa; Adesope, Olusola O.; Ardasheva, Yuliya

    2017-01-01

    Although the seductive details effect, a phenomenon where interesting but irrelevant pictures impede comprehension, is well documented, studies examining ways of moderating its detrimental impact on learning remain few. The present study examined the effect of note-taking on the seductive details effect. Chinese undergraduate participants (N = 91)…

  4. 29 CFR 403.3 - Form of annual financial report-detailed report.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 2 2010-07-01 2010-07-01 false Form of annual financial report-detailed report. 403.3... LABOR LABOR-MANAGEMENT STANDARDS LABOR ORGANIZATION ANNUAL FINANCIAL REPORTS § 403.3 Form of annual financial report—detailed report. Every labor organization shall, except as expressly provided otherwise in...

  5. Detailed Monte Carlo simulation of electron elastic scattering

    International Nuclear Information System (INIS)

    Chakarova, R.

    1994-04-01

    A detailed Monte Carlo model is described which simulates the transport of electrons penetrating a medium without energy loss. The trajectory of each electron is constructed as a series of successive interaction events - elastic or inelastic scattering. Differential elastic scattering cross sections, elastic and inelastic mean free paths are used to describe the interaction process. It is presumed that the cross sections data are available and the Monte Carlo algorithm does not include their evaluation. Electrons suffering successive elastic collisions are followed until they escape from the medium or (if the absorption is negligible) their path length exceeds a certain value. The inelastic events are thus treated as absorption. The medium geometry is a layered infinite slab. The electron source could be an incident electron beam or electrons created inside the material. The objective is to obtain the angular distribution, the path length and depth distribution and the collision number distribution of electrons emitted through the surface of the medium. The model is applied successfully to electrons with energy between 0.4 and 20 keV reflected from semi-infinite homogeneous materials with different scattering properties. 16 refs, 9 figs

  6. CDC WONDER: Detailed Mortality - Underlying Cause of Death

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Detailed Mortality - Underlying Cause of Death data on CDC WONDER are county-level national mortality and population data spanning the years 1999-2009. Data are...

  7. End region detailing of pretensioned concrete bridge girders.

    Science.gov (United States)

    2013-03-01

    End region detailing has significant effect on the serviceability, behavior, and capacity of pretensioned concrete girders. : In this project, experimental and analytical research programs were conducted to evaluate and quantify the effects of : diff...

  8. Detailed field test of yaw-based wake steering

    DEFF Research Database (Denmark)

    Fleming, P.; Churchfield, M.; Scholbrock, A.

    2016-01-01

    production. In the first phase, a nacelle-mounted scanning lidar was used to verify wake deflection of a misaligned turbine and calibrate wake deflection models. In the second phase, these models were used within a yaw controller to achieve a desired wake deflection. This paper details the experimental......This paper describes a detailed field-test campaign to investigate yaw-based wake steering. In yaw-based wake steering, an upstream turbine intentionally misaligns its yaw with respect to the inflow to deflect its wake away from a downstream turbine, with the goal of increasing total power...... design and setup. All data collected as part of this field experiment will be archived and made available to the public via the U.S. Department of Energy’s Atmosphere to Electrons Data Archive and Portal....

  9. Detailed Globes Enhance Education and Recreation

    Science.gov (United States)

    2007-01-01

    Orbis World Globes creates inflatable globes-Earthballs-in many sizes that depict Earth as it is seen from space, complete with atmospheric cloud cover. Orbis designs and produces the most visually authentic replicas of Earth ever created, and NASA took notice of Orbis globes and employed a 16-inch diameter EarthBall for an educational film it made aboard the STS-45 shuttle mission. Orbis later collaborated with NASA to create two 16-foot diameter world globes for display at the 2002 Olympic Winter Games in Salt Lake City, using more detailed satellite imagery. The satellite image now printed on all Orbis globes displays 1-kilometer resolution and is 21,600 by 43,200 pixels in size, and Orbis globes are otherwise meteorologically accurate, though the cloud cover has been slightly reduced in order for most of the landforms to be visible. Orbis also developed the exclusive NightGlow Cities feature, enabling EarthBalls to display the world's cities as they appear as the Earth revolves from daylight into night. Orbis inflatable globes are available in sizes from 1 to 100 feet in diameter, with the most common being the standard 16-inch and 1-meter diameter EarthBalls. Applications include educational uses from preschools to universities, games, and for a variety of display purposes at conferences, trade shows, festivals, concerts, and parades. A 16-foot diameter Orbis globe was exhibited at the United Nations' World Urban Forum, in Vancouver, Canada; the Space 2006 conference, in San Jose, California; and the X-Prize Cup Personal Spaceflight Exposition in Las Cruces, New Mexico.

  10. Detailed Sensory Memory, Sloppy Working Memory

    OpenAIRE

    Sligte, Ilja G.; Vandenbroucke, Annelinde R. E.; Scholte, H. Steven; Lamme, Victor A. F.

    2010-01-01

    Visual short-term memory (VSTM) enables us to actively maintain information in mind for a brief period of time after stimulus disappearance. According to recent studies, VSTM consists of three stages - iconic memory, fragile VSTM, and visual working memory - with increasingly stricter capacity limits and progressively longer lifetimes. Still, the resolution (or amount of visual detail) of each VSTM stage has remained unexplored and we test this in the present study. We presented people with a...

  11. Quality system target on a detail design activity irradiator ISG 500

    International Nuclear Information System (INIS)

    Reinhard Pardede

    2010-01-01

    Currently, an engineering team of Nuclear Equipment Engineering Center PRPN has been beening technology innovation detail design of Irradiator ISG 500, then enter continuing to a construction phase. A schedule detail design still being not finish yet. The installation of Irradiator ISG 500 will be used to preservative the result of agricultural product in Indonesia. It is known as an export commodity and row material for food. However, its quality need some improvements in order to meet internal and foreign consumer standard. To enhance a quality system in detail design phase has already used ISO 9001: 2008 on clausul-7: Product Realization-design. It also needs a radioactive regulation Bapeten-Indonesian Nuclear Energy Surveillance Agency compliance with IAEA GS-R 3: 2006 as well. Scope of activity design is Instrumentation and Control system; Mechanical- Electrical; Radiation and Safety and Dosimetry; Civil Structured; Quality Assurance and Technoeconomic. Technology Innovating be applied to achieved economics through Costumer and Market Focused. Gamma irradiation of Irradiator ISG 500 can be used to improve hygienic quality in terms of technological as well as economical aspects. Technology innovation fit with the state of the arts right now. Assessment should be done base not only internal audit but also monitoring and surveillance as well. By application of a Quality System on detail design activity hopefully to enhance quality on detail design, construction, more over irradiator operation. (author)

  12. In Brief: Report details climate change effects on cultural sites

    Science.gov (United States)

    Zielinski, Sarah

    2007-04-01

    A new report from UNESCO (United Nations Educational, Scientific, and Cultural Organization) details how 26 World Heritage sites could be affected by coming climate changes. The 26 examples, which are meant to be representative of the range of threats to the 830 sites inscribed in the World Heritage List, are divided into five types: archaeological sites, glaciers, historic cities and settlements, marine biodiversity, and terrestrial biodiversity. Some of the examples include the Great Barrier Reef, which is expected to experience more frequent episodes of coral bleaching; Timbuktu in Mali, threatened by desertification; and the Chavín Archaeological Site in the Peruvian Central Andes, one of the earliest and best-known pre-Columbian sites, which could be affected by glacier melting and flooding. The report, ``Case Studies on Climate Change and World Heritage,'' is available at http://whc.unesco.org/documents/publi_climatechange.pdf

  13. New details emerge from the Einstein files

    CERN Multimedia

    Overbye, D

    2002-01-01

    For many years the FBI spied on Einstein. New details of this surveilance are emerging in "The Einstein File: J. Edgar Hoover's Secret War Against the World's Most Famous Scientist," by Fred Jerome, who sued the government with the help of the Public Citizen Litigation Group to obtain a less censored version of the file (1 page).

  14. Verifying detailed fluctuation relations for discrete feedback-controlled quantum dynamics

    Science.gov (United States)

    Camati, Patrice A.; Serra, Roberto M.

    2018-04-01

    Discrete quantum feedback control consists of a managed dynamics according to the information acquired by a previous measurement. Energy fluctuations along such dynamics satisfy generalized fluctuation relations, which are useful tools to study the thermodynamics of systems far away from equilibrium. Due to the practical challenge to assess energy fluctuations in the quantum scenario, the experimental verification of detailed fluctuation relations in the presence of feedback control remains elusive. We present a feasible method to experimentally verify detailed fluctuation relations for discrete feedback control quantum dynamics. Two detailed fluctuation relations are developed and employed. The method is based on a quantum interferometric strategy that allows the verification of fluctuation relations in the presence of feedback control. An analytical example to illustrate the applicability of the method is discussed. The comprehensive technique introduced here can be experimentally implemented at a microscale with the current technology in a variety of experimental platforms.

  15. Boosting flood warning schemes with fast emulator of detailed hydrodynamic models

    Science.gov (United States)

    Bellos, V.; Carbajal, J. P.; Leitao, J. P.

    2017-12-01

    Floods are among the most destructive catastrophic events and their frequency has incremented over the last decades. To reduce flood impact and risks, flood warning schemes are installed in flood prone areas. Frequently, these schemes are based on numerical models which quickly provide predictions of water levels and other relevant observables. However, the high complexity of flood wave propagation in the real world and the need of accurate predictions in urban environments or in floodplains hinders the use of detailed simulators. This sets the difficulty, we need fast predictions that meet the accuracy requirements. Most physics based detailed simulators although accurate, will not fulfill the speed demand. Even if High Performance Computing techniques are used (the magnitude of required simulation time is minutes/hours). As a consequence, most flood warning schemes are based in coarse ad-hoc approximations that cannot take advantage a detailed hydrodynamic simulation. In this work, we present a methodology for developing a flood warning scheme using an Gaussian Processes based emulator of a detailed hydrodynamic model. The methodology consists of two main stages: 1) offline stage to build the emulator; 2) online stage using the emulator to predict and generate warnings. The offline stage consists of the following steps: a) definition of the critical sites of the area under study, and the specification of the observables to predict at those sites, e.g. water depth, flow velocity, etc.; b) generation of a detailed simulation dataset to train the emulator; c) calibration of the required parameters (if measurements are available). The online stage is carried on using the emulator to predict the relevant observables quickly, and the detailed simulator is used in parallel to verify key predictions of the emulator. The speed gain given by the emulator allows also to quantify uncertainty in predictions using ensemble methods. The above methodology is applied in real

  16. Method for determining detailed rod worth profiles at low power in the fast test reactor

    International Nuclear Information System (INIS)

    Sevenich, R.A.

    1975-08-01

    A method for obtaining a detailed rod worth profile at low power for a slow control rod insertion is presented. The accuracy of the method depends on a preparatory experiment in which the test rod is dropped quickly to yield, upon analysis, the magnitude of the rod worth and an effective source value. These numbers are employed to initialize the inverse kinetics analysis for the slow insertion. Corrections for changes in detection efficiency are not included for the simulated experiments. (U.S.)

  17. Study of geological details towards feasibility of uranium project: Indian case studies

    International Nuclear Information System (INIS)

    Sarangi, A.

    2014-01-01

    Appropriate technical evaluation of geological details at early stage of exploration is the key to minimising the lead-time between discovery and production. This has a major influence on economic viability of the deposits. Indian uranium deposits are of medium-tonnage and low-grade occurring in dissimilar geological provinces. Detailed studies of geological characteristics of these deposits are very vital to the proper selection of technology and subsequent successful operation. The method of mining (underground/open pit/in-situ recovery) is influenced by the ore body depth, size, grade, configuration, hostrock and adjoining strata characteristics, hydrological condition etc. The ore processing technology is also subjective to mineralogical characteristics of the ore. In order to draw the flowsheet, determine process parameters and selection of reagents, a comprehensive study on identification of minerals and their probable metallurgical characteristics, general physical relationship between various minerals, mineral liberation size etc is of great significance. The technology for disposal of tailings is also influenced by geological/geo-hydrological characteristics. The key to successful operation of Indian uranium deposits lies in outlining a pre-development strategy as the exploration advances to different stages. This phase called ''exploratory mining'' - which starts with detailed exploration and ends with approval of the project is very critical for early commissioning of the project. The activities during this period include collection of representative drill core samples during exploration, laboratory studies, geo-technical studies and determination of geomechanical properties of ore and waste rock etc. Later, the ore lenses are accessed through limited entry(ies). Developments along the ore body helps in better understanding of the configuration of the lenses. Studies for strata control in case of underground mining are carried out towards deciding the

  18. Detailed Performance of the Outer Tracker at LHCb

    CERN Document Server

    Tuning, N

    2014-01-01

    The LHCb Outer Tracker is a gaseous detector covering an area of 5x6m2 with 12 double layers of straw tubes. Based on data of the first LHC running period from 2010 to 2012, the performance in terms of the single hit resolution and efficiency are presented. Details on the ionization length and subtle effects regarding signal reflections and the subsequent time-walk correction are given. The efficiency to detect a hit in the central half of the straw is estimated to be 99.2%, and the position resolution is determined to be approximately 200 um, depending on the detailed implementation of the internal alignment of individual detector modules. The Outer Tracker received a dose in the hottest region corresponding to 0.12 C/cm, and no signs of gain deterioration or other ageing effects are observed.

  19. Aerial gamma ray and magnetic survey: Powder River R and D Project, Arminto Detail, Wyoming. Final report

    International Nuclear Information System (INIS)

    1979-05-01

    The small detail area, 18 miles by 18 miles, lying near the center of the Powder River Basin, is covered entirely by sediments of the Eocene Wasatch Formation. Historically economic uranium deposits have been worked in the southeast corner of the area which includes the northern extremity of the Pumpkin Buttes district. 127 statistical uranium anomalies were generated for the study area, based on area wide statistics

  20. Detailed bathymetric surveys in the central Indian Basin

    Digital Repository Service at National Institute of Oceanography (India)

    Kodagali, V.N.; KameshRaju, K.A.; Ramprasad, T.; George, P.; Jaisankar, S.

    Over 420,000 line kilometers of echo-sounding data was collected in the Central Indian Basin. This data was digitized, merged with navigation data and a detailed bathymetric map of the Basin was prepared. The Basin can be broadly classified...

  1. Pictorial Detail and Recall in Adults and Children.

    Science.gov (United States)

    Ritchey, Gary H.

    1982-01-01

    Specific comparisons for a categorized set of items indicated that recall of detailed drawings and outlines was superior to recall of words. For an uncategorized set, outlines were recalled significantly better than pictures and both were recalled better than words. (Author/PN)

  2. Is the truth in the details? Extended narratives help distinguishing false "memories" from false "reports".

    Science.gov (United States)

    Sjödén, Björn; Granhag, Pär Anders; Ost, James; Roos Af Hjelmsäter, Emma

    2009-06-01

    The present study examined the effects of fantasy proneness on false "reports" and false "memories", of existent and non-existent footage of a public event. We predicted that highly fantasy prone individuals would be more likely to stand by their initial claim of having seen a film of the event than low fantasy prone participants when prompted for more details about their experiences. Eighty creative arts students and 80 other students were asked whether they had seen CCTV footage preceding the attack on Swedish foreign minister Anna Lindh up to, and including, non-existent footage of the actual moment of the attack. If affirmative, they were probed for extended narratives of what they claimed to have seen. Overall, 64% of participants provided a false "report" by answering yes to the initial question. Of these, 30% provided no explicit details of the attack, and a further 15% retracted their initial answer in their narratives. This left 19% of the sample who appeared to have false "memories" because they provided explicit details of the actual moment of the attack. Women scored higher than men and art students scored higher than other students on fantasy proneness, but there was no effect on levels of false reporting or false "memory". Memories were rated more vivid and clear for existent compared to non-existent aspects of the event. In sum, these data suggest a more complex relationship between memory distortions and fantasy proneness than previously observed.

  3. Detail-enhanced multimodality medical image fusion based on gradient minimization smoothing filter and shearing filter.

    Science.gov (United States)

    Liu, Xingbin; Mei, Wenbo; Du, Huiqian

    2018-02-13

    In this paper, a detail-enhanced multimodality medical image fusion algorithm is proposed by using proposed multi-scale joint decomposition framework (MJDF) and shearing filter (SF). The MJDF constructed with gradient minimization smoothing filter (GMSF) and Gaussian low-pass filter (GLF) is used to decompose source images into low-pass layers, edge layers, and detail layers at multiple scales. In order to highlight the detail information in the fused image, the edge layer and the detail layer in each scale are weighted combined into a detail-enhanced layer. As directional filter is effective in capturing salient information, so SF is applied to the detail-enhanced layer to extract geometrical features and obtain directional coefficients. Visual saliency map-based fusion rule is designed for fusing low-pass layers, and the sum of standard deviation is used as activity level measurement for directional coefficients fusion. The final fusion result is obtained by synthesizing the fused low-pass layers and directional coefficients. Experimental results show that the proposed method with shift-invariance, directional selectivity, and detail-enhanced property is efficient in preserving and enhancing detail information of multimodality medical images. Graphical abstract The detailed implementation of the proposed medical image fusion algorithm.

  4. Are medical articles highlighting detailed statistics more cited?

    Directory of Open Access Journals (Sweden)

    Mike Thelwall

    2015-06-01

    Full Text Available When conducting a literature review, it is natural to search for articles and read their abstracts in order to select papers to read fully. Hence, informative abstracts are important to ensure that research is read. The description of a paper's methods may help to give confidence that a study is of high quality. This article assesses whether medical articles that mention three statistical methods, each of which is arguably indicative of a more detailed statistical analysis than average, are more highly cited. The results show that medical articles mentioning Bonferroni corrections, bootstrapping and effect size tend to be 7%, 8% and 15% more highly ranked for citations than average, respectively. Although this is consistent with the hypothesis that mentioning more detailed statistical techniques generate more highly cited research, these techniques may also tend to be used in more highly cited areas of Medicine.

  5. Detailed GEANT description of the SDC central calorimeters

    International Nuclear Information System (INIS)

    Glagolev, V.V.; Li, W.

    1994-01-01

    This article represents the very detailed simulation model of the SDC central calorimeters and some results which were obtained using that model. The central calorimeters structure was coded on the GEANT 3.15 base in the frame of the SDCSIM environment. The SDCSIM is the general shell for simulation of the SDC set-up. The calorimeters geometry has been coded according to the FNAL and ANL engineering drawings and engineering data file. SDC central calorimeters detailed description is extremely useful for different simulation tasks, for fast simulation program parameters tuning, for different geometry especially studying (local response nonuniformity from bulkheads in the e.m. calorimeter and from coil supports and many others) and for the interpretation of the experimental data from the calorimeters. This simulation model is very useful for tasks of the test beam modules calorimeter calibration and for calorimeter in situ calibration. 3 refs., 8 figs

  6. Internal combustion engines a detailed introduction to the thermodynamics of spark and compression ignition engines, their design and development

    CERN Document Server

    Benson, Rowland S

    1979-01-01

    Internal Combustion of Engines: A Detailed Introduction to the Thermodynamics of Spark and Compression Ignition Engines, Their Design and Development focuses on the design, development, and operations of spark and compression ignition engines. The book first describes internal combustion engines, including rotary, compression, and indirect or spark ignition engines. The publication then discusses basic thermodynamics and gas dynamics. Topics include first and second laws of thermodynamics; internal energy and enthalpy diagrams; gas mixtures and homocentric flow; and state equation. The text ta

  7. Detailed Design and Fabrication Method of the ITER Vacuum Vessel Ports

    International Nuclear Information System (INIS)

    Hee-Jae Ahn; Kwon, T.H.; Hong, Y.S.

    2006-01-01

    The engineering design of the ITER vacuum vessel (VV) has been progressed by the ITER International Team (IT) with the cooperation of several participant teams (PT). The VV and ports are the components allocated to Korea for the construction of the ITER. Hyundai Heavy Industries has been involved in the structural analysis, detailed design and development of the fabrication method of the upper and lower ports within the framework of the ITER transitional arrangements (ITA). The design of the port structures has been investigated to validate and to improve the conceptual designs of the ITER IT and other PT. The special emphasis was laid on the flange joint between the port extension and the in-port plug to develop the design of the upper port. The modified design with a pure friction type flange with forty-eight pieces of bolts instead of the tangential key is recommended. Furthermore, the alternative flange designs developed by the ITER IT have been analyzed in detail to simplify the lip seal maintenance into the port flange. The structural analyses of the lower RH port have been also performed to verify the capacity for supporting the VV. The maximum stress exceeds the allowable value at the reinforcing block and basement. More elaborate local models have been developed to mitigate the stress concentration and to modify the component design. The fabrication method and the sequence of the detailed fabrication for the ports are developed focusing on the cost reduction as well as the simplification. A typical port structure includes a port stub, a stub extension and a port extension with a connecting duct. The fabrication sequence consists of surface treatment, cutting, forming, cleaning, welding, machining, and non-destructive inspection and test. Tolerance study has been performed to avoid the mismatch of each fabricated component and to obtain the suitable tolerances in the assembly at the shop and site. This study is based on the experience in the fabrication of

  8. Detailed radon emanation mapping in Northern Latium

    International Nuclear Information System (INIS)

    Aumento, F.

    1993-01-01

    Detailed radon surveys over 5,000 km 2 of Northern Latium, covering the northern part of the volcanic province of Central Italy, commenced in the mid eighties as part of a geothermal exploration programme; the surveys have subsequently been continued and amplified with environmental protection in mind. The area is now covered by ground emission maps, radon levels in water supplies, emissions from the different lithologies and concentrations in houses. The high uraniferous content of the volcanics, the porous nature of the ubiquitous pyroclastics, and active geothermal systems in the area combine to convey to ground level high concentrations of radon. The emissions show strong lateral variations which are geologically and tectonically controlled, such that only detailed surveys reveal the extent and locations of anomalous radon emanations. Unfortunately, long ago towns often developed in strategic locations. For Northern Latium this means on volcanic highs formed by faulted tuff blocks, two geological features associated with particularly high radon emissions. As a result, in contrast to the low average indoor radon concentrations for the greater part of Italy, in some of these town the average values exceed 450 Bq/m 3 . (author). 1 fig

  9. The Details in the Distributions: Why and how to study phenotypic variability

    Science.gov (United States)

    Geiler-Samerotte, KA; Bauer, CR; Li, S; Ziv, N; Gresham, D; Siegal, ML

    2013-01-01

    Phenotypic variability is present even when genetic and environmental differences between cells are reduced to the greatest possible extent. For example, genetically identical bacteria display differing levels of resistance to antibiotics, clonal yeast populations demonstrate morphological and growth-rate heterogeneity, and mouse blastomeres from the same embryo have stochastic differences in gene expression. However, the distributions of phenotypes present among isogenic organisms are often overlooked; instead, many studies focus on population aggregates such as the mean. The details of these distributions are relevant to major questions in diverse fields, including the evolution of antimicrobial-drug and chemotherapy resistance. We review emerging experimental and statistical techniques that allow rigorous analysis of phenotypic variability and thereby may lead to advances across the biological sciences. PMID:23566377

  10. Extending the Intermediate Data Structure (IDS for longitudinal historical databases to include geographic data

    Directory of Open Access Journals (Sweden)

    Finn Hedefalk

    2014-09-01

    Full Text Available The Intermediate Data Structure (IDS is a standardised database structure for longitudinal historical databases. Such a common structure facilitates data sharing and comparative research. In this study, we propose an extended version of IDS, named IDS-Geo, that also includes geographic data. The geographic data that will be stored in IDS-Geo are primarily buildings and/or property units, and the purpose of these geographic data is mainly to link individuals to places in space. When we want to assign such detailed spatial locations to individuals (in times before there were any detailed house addresses available, we often have to create tailored geographic datasets. In those cases, there are benefits of storing geographic data in the same structure as the demographic data. Moreover, we propose the export of data from IDS-Geo using an eXtensible Markup Language (XML Schema. IDS-Geo is implemented in a case study using historical property units, for the period 1804 to 1913, stored in a geographically extended version of the Scanian Economic Demographic Database (SEDD. To fit into the IDS-Geo data structure, we included an object lifeline representation of all of the property units (based on the snapshot time representation of single historical maps and poll-tax registers. The case study verifies that the IDS-Geo model is capable of handling geographic data that can be linked to demographic data.

  11. Statistical Analysis of Detailed 3-D CFD LES Simulations with Regard to CCV Modeling

    Directory of Open Access Journals (Sweden)

    Vítek Oldřich

    2016-06-01

    Full Text Available The paper deals with statistical analysis of large amount of detailed 3-D CFD data in terms of cycle-to-cycle variations (CCVs. These data were obtained by means of LES calculations of many consecutive cycles. Due to non-linear nature of Navier-Stokes equation set, there is a relatively significant CCV. Hence, every cycle is slightly different – this leads to requirement to perform statistical analysis based on ensemble averaging procedure which enables better understanding of CCV in ICE including its quantification. The data obtained from the averaging procedure provides results on different space resolution levels. The procedure is applied locally, i.e., in every cell of the mesh. Hence there is detailed CCV information on local level – such information can be compared with RANS simulations. Next, volume/mass averaging provides information at specific locations – e.g., gap between electrodes of a spark plug. Finally, volume/mass averaging of the whole combustion chamber leads to global information which can be compared with experimental data or results of system simulation tools (which are based on 0-D/1-D approach.

  12. The Soleil detailed pre-project report

    International Nuclear Information System (INIS)

    1999-01-01

    The aim of the joint CNRS/CEA Soleil project was to develop a facility equipped with several synchrotron radiation sources and their associated experimental devices in order to answer the estimated research needs in this domain for the 20 to 30 forthcoming years. This document is the detailed pre-project. It describes the studies carried out and relative to the infrastructures and buildings, to the accelerators and light sources (storage ring, injector, radiation production), to the program of experiments, to the computer science aspects, and to the administrative and organisational aspects. (J.S.)

  13. Detailed comparison of LIGO and Virgo inspiral pipelines in preparation for a joint search

    International Nuclear Information System (INIS)

    Beauville, F; Buskulic, D; Grosjean, D; Bizouard, M-A; Cavalier, F; Clapson, A-C; Hello, P; Blackburn, L; Katsavounidis, E; Bosi, L; Brocco, L; Brown, D A; Chatterji, S; Christensen, N; Knight, M; Fairhurst, S; Guidi, G; Heng, S; Hewitson, M; Klimenko, S

    2008-01-01

    Presented in this paper is a detailed and direct comparison of the detection pipelines used by LIGO and Virgo in their attempt to observe gravitational waves from binary neutron star systems. In order to test the search programs, numerous inspiral signals were added to 24 h of simulated detector data. The efficiencies of the different pipelines were tested, and found to be very similar. Parameter estimation routines were also tested. We demonstrate that there are definite benefits if LIGO and Virgo conduct a joint coincident analysis; these advantages include increased detection efficiency and information on source sky location

  14. Detailed comparison of LIGO and Virgo inspiral pipelines in preparation for a joint search

    Energy Technology Data Exchange (ETDEWEB)

    Beauville, F; Buskulic, D; Grosjean, D [Laboratoire d' Annecy-le-Vieux de Physique des Particules, Chemin de Bellevue, BP 110, 74941 Annecy-le-Vieux Cedex (France); Bizouard, M-A; Cavalier, F; Clapson, A-C; Hello, P [Laboratoire de l' Accelerateur Lineaire, IN2P3/CNRS-Universite de Paris XI, BP 34, 91898 Orsay Cedex (France); Blackburn, L; Katsavounidis, E [LIGO-Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Bosi, L [INFN Sezione di Perugia and/or Universita di Perugia, Via A Pascoli, I-06123 Perugia (Italy); Brocco, L [INFN Sezione di Roma and/or Universita ' La Sapienza' , P.le A Moro 2, I-00185, Roma (Italy); Brown, D A; Chatterji, S [LIGO-California Institute of Technology, Pasadena, CA 91125 (United States); Christensen, N; Knight, M [Carleton College, Northfield, MN 55057 (United States); Fairhurst, S [University of Wisconsin-Milwaukee, Milwaukee, WI 53201 (United States); Guidi, G [INFN Sezione Firenze/Urbino Via G Sansone 1, I-50019 Sesto Fiorentino (Italy) and/or Universita di Firenze, Largo E.Fermi 2, I-50125 Firenze and/or Universita di Urbino, Via S Chiara 27, I-61029 Urbino (Italy); Heng, S; Hewitson, M [University of Glasgow, Glasgow, G12 8QQ (United Kingdom); Klimenko, S [University of Florida-Gainesville, FL 32611 (United States)] (and others)

    2008-02-21

    Presented in this paper is a detailed and direct comparison of the detection pipelines used by LIGO and Virgo in their attempt to observe gravitational waves from binary neutron star systems. In order to test the search programs, numerous inspiral signals were added to 24 h of simulated detector data. The efficiencies of the different pipelines were tested, and found to be very similar. Parameter estimation routines were also tested. We demonstrate that there are definite benefits if LIGO and Virgo conduct a joint coincident analysis; these advantages include increased detection efficiency and information on source sky location.

  15. Organic preservation of fossil musculature with ultracellular detail.

    Science.gov (United States)

    McNamara, Maria; Orr, Patrick J; Kearns, Stuart L; Alcalá, Luis; Anadón, Pere; Peñalver-Mollá, Enrique

    2010-02-07

    The very labile (decay-prone), non-biomineralized, tissues of organisms are rarely fossilized. Occurrences thereof are invaluable supplements to a body fossil record dominated by biomineralized tissues, which alone are extremely unrepresentative of diversity in modern and ancient ecosystems. Fossil examples of extremely labile tissues (e.g. muscle) that exhibit a high degree of morphological fidelity are almost invariably replicated by inorganic compounds such as calcium phosphate. There is no consensus as to whether such tissues can be preserved with similar morphological fidelity as organic remains, except when enclosed inside amber. Here, we report fossilized musculature from an approximately 18 Myr old salamander from lacustrine sediments of Ribesalbes, Spain. The muscle is preserved organically, in three dimensions, and with the highest fidelity of morphological preservation yet documented from the fossil record. Preserved ultrastructural details include myofilaments, endomysium, layering within the sarcolemma, and endomysial circulatory vessels infilled with blood. Slight differences between the fossil tissues and their counterparts in extant amphibians reflect limited degradation during fossilization. Our results provide unequivocal evidence that high-fidelity organic preservation of extremely labile tissues is not only feasible, but likely to be common. This is supported by the discovery of similarly preserved tissues in the Eocene Grube Messel biota.

  16. MIV project: Simulator detailed design and integration for the EUROSIM

    DEFF Research Database (Denmark)

    Thuesen, Gøsta; Parisch, Manlio; Jørgensen, John Leif

    1997-01-01

    Under the ESA contract #11453/95/NL/JG(SC), aiming at assessing the feasibility of Rendez-vous and docking of unmanned spacecrafts, a reference mission scenario was defined. This report describes the detailed code developed for the contract, the code module interface and the interface to the EURO......Under the ESA contract #11453/95/NL/JG(SC), aiming at assessing the feasibility of Rendez-vous and docking of unmanned spacecrafts, a reference mission scenario was defined. This report describes the detailed code developed for the contract, the code module interface and the interface...

  17. The Architectural and Technical Consequences of Different Window Details in a Danish Passive House

    DEFF Research Database (Denmark)

    Brunsgaard, Camilla; Heiselberg, Per; Jensen, Rasmus Lund

    2008-01-01

     This paper focuses on a study of window details from "The Comfort Houses" in relation to "traditional" Danish construction solutions. The aim is to evaluate different ways of solving a window detail and to identify both architectural and technical consequences. It is important to investigate bot...... aspects of a detail because the best technical solution might not be the best architectural solution. A proposal from "The Comfort Houses" - a brick passive house, will be used as a basis....... This paper focuses on a study of window details from "The Comfort Houses" in relation to "traditional" Danish construction solutions. The aim is to evaluate different ways of solving a window detail and to identify both architectural and technical consequences. It is important to investigate both...

  18. 20 CFR 422.604 - Request for detailed information.

    Science.gov (United States)

    2010-04-01

    ... Section 422.604 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ORGANIZATION AND PROCEDURES... whom you have premium responsibility, you may request detailed information as to the work histories of... error (as defined in § 422.602) and request review of the assignment if you have not already requested...

  19. Detail study of SiC MOSFET switching characteristics

    DEFF Research Database (Denmark)

    Li, Helong; Munk-Nielsen, Stig

    2014-01-01

    This paper makes detail study of the latest SiC MOSFETs switching characteristics in relation to gate driver maximum current, gate resistance, common source inductance and parasitic switching loop inductance. The switching performance of SiC MOSFETs in terms of turn on and turn off voltage...

  20. Detailed analysis of the KAERI nTOF facility

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Woon; Lee, Young Ouk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-06-15

    A project for building a neutron time-of-flight (nTOF) facility is progressing. We expect that the construction will start in early 2016. Before that, a detailed simulation based on the current architectural drawings was performed to optimize the performance of our facility. Currently, several parts had been modified or changed from the original design to reflect requirements such as the layout of the electron beam line, shape of the vacuum chamber producing a neutron beam, and the underground layout of the nTOF facility. Detailed analysis for these modifications has been done with MCNP simulation. An overview of our photo-neutron source and KAERI nTOF facility were introduced. The numerical simulations for heat deposition, source term, and radiation shielding of KAERI nTOF facility were performed and the results are discussed. We are expecting that the construction of the KAERI nTOF facility will start in early 2016, and these results will be used as basic data.

  1. Automatic generation of medium-detailed 3D models of buildings based on CAD data

    NARCIS (Netherlands)

    Dominguez-Martin, B.; Van Oosterom, P.; Feito-Higueruela, F.R.; Garcia-Fernandez, A.L.; Ogayar-Anguita, C.J.

    2015-01-01

    We present the preliminary results of a work in progress which aims to obtain a software system able to automatically generate a set of diverse 3D building models with a medium level of detail, that is, more detailed that a mere parallelepiped, but not as detailed as a complete geometric

  2. Simulations of Tokamak Edge Turbulence Including Self-Consistent Zonal Flows

    Science.gov (United States)

    Cohen, Bruce; Umansky, Maxim

    2013-10-01

    Progress on simulations of electromagnetic drift-resistive ballooning turbulence in the tokamak edge is summarized in this mini-conference talk. A more detailed report on this work is presented in a poster at this conference. This work extends our previous work to include self-consistent zonal flows and their effects. The previous work addressed the simulation of L-mode tokamak edge turbulence using the turbulence code BOUT. The calculations used realistic single-null geometry and plasma parameters of the DIII-D tokamak and produced fluctuation amplitudes, fluctuation spectra, and particle and thermal fluxes that compare favorably to experimental data. In the effect of sheared ExB poloidal rotation is included with an imposed static radial electric field fitted to experimental data. In the new work here we include the radial electric field self-consistently driven by the microturbulence, which contributes to the sheared ExB poloidal rotation (zonal flow generation). We present simulations with/without zonal flows for both cylindrical geometry, as in the UCLA Large Plasma Device, and for the DIII-D tokamak L-mode cases in to quantify the influence of self-consistent zonal flows on the microturbulence and the concomitant transport. This work was performed under the auspices of the US Department of Energy under contract DE-AC52-07NA27344 at the Lawrence Livermore National Laboratory.

  3. Soot formation in a blast furnace - Prediction via a parametric study, using detailed kinetic modeling

    Energy Technology Data Exchange (ETDEWEB)

    Nordstroem, T.; Kilpinen, P.; Hupa, M. [Aabo Akademi, Turku (Finland). Combustion Chemistry Group

    1996-12-31

    The objective of this work has been to investigate the soot formation in a blast furnace fired with heavy fuel oil, using detailed kinetic modelling. This work has been concentrated on parameter studies that could explain under which conditions soot is formed and how that formation could be avoided. The parameters investigated were temperature, pressure, stoichiometric ratio, pyrolysis gas composition and reactor model. The calculations were based on a reaction mechanism that consists of 100 species and 446 reactions including polyaromatic hydrocarbons (PAM) up to 7 aromatic rings SULA 2 Research Programme; 4 refs.

  4. Soot formation in a blast furnace - Prediction via a parametric study, using detailed kinetic modeling

    Energy Technology Data Exchange (ETDEWEB)

    Nordstroem, T; Kilpinen, P; Hupa, M [Aabo Akademi, Turku (Finland). Combustion Chemistry Group

    1997-12-31

    The objective of this work has been to investigate the soot formation in a blast furnace fired with heavy fuel oil, using detailed kinetic modelling. This work has been concentrated on parameter studies that could explain under which conditions soot is formed and how that formation could be avoided. The parameters investigated were temperature, pressure, stoichiometric ratio, pyrolysis gas composition and reactor model. The calculations were based on a reaction mechanism that consists of 100 species and 446 reactions including polyaromatic hydrocarbons (PAM) up to 7 aromatic rings SULA 2 Research Programme; 4 refs.

  5. Analysis of Detailed Energy Audits and Energy Use Measures of University Buildings

    Directory of Open Access Journals (Sweden)

    Kęstutis Valančius

    2011-12-01

    Full Text Available The paper explains the results of a detailed energy audit of the buildings of Vilnius Gediminas Technical University. Energy audits were performed with reference to the international scientific project. The article presents the methodology and results of detailed measurements of energy balance characteristics.Article in Lithuanian

  6. Regional and Detailed Survey for Radon Activities in Soil-Gas and Groundwater in the Okchon Zone, Korea

    Science.gov (United States)

    Je, H.-K.; Chon, H.-T.

    2012-04-01

    The Okchon zone in Korea provides a typical example of natural geological materials enriched in potentially toxic elements including uranium which is parent nuclide for radon gas. For the purpose of radon radioactivity risk assessment, making the map of radon risk grade from Okchon zone, regional and detailed field surveys were carried out during 3 years. The study area is located in the central part of Korea, called the Okchon zone (about 5,100 km2), which occur in a 80km wide, northeast-trending belt that extends across the Korean Peninsula. The Okchon zone is underlain by metasedimentary rocks of unknown age that are composed mainly of black slate, phyllite, shale, and limestone. The three research areas (defined as Boeun, Chungju, and Nonsan) for detailed survey were selected from the results of regional survey. Results of detailed radon survey indicated a wide range of radon activities for soil-gases (148-1,843 pCi/L) and ground waters (23-5,540 pCi/L). About 15 percent of soil-gas samples exceeded 1,000 pCi/L and 84 percent of ground water samples exceeded the MCL (maximum contaminant level) of drinking water, 300 pCi/L, which proposed by U.S. Environmental Protection Agency in 1999. For detailed survey, radon activities of soil-gas and ground water were classified as bedrock geology, based on 1/50,000 geological map and field research. For soil-gas measurements, mean values of radon activity from black slate-shale (789 pCi/L) were highest among the other base rocks. And for groundwater measurements, mean value of radon activities were decreased in the order of granite (1,345 pCi/L) > black shale-slate (915 pCi/L) > metasediments (617 pCi/L). Result of indoor radon measurement from detailed survey areas showed that about 50% of houses exceeded the indoor guideline, 4 pCi/L. For the radon risk assessment in indoor environment showed that probability of lung cancer risk from the houses located on the granite base rock (3.0×10-2) was highest among the other

  7. An alternative approach to contrast-detail testing of X-ray image intensifier systems

    International Nuclear Information System (INIS)

    Kotre, C.J.; Marshall, N.W.; Faulkner, K.

    1992-01-01

    The difficulties of making the results of threshold contrast-detail diameter tests on X-ray image intensifier systems consistent with published performance standards are discussed. The current approach to contrast-detail testing is described and an alternative method intended to give greater consistency for all image intensifier input field diameters proposed. The current and alternative test conditions are compared on two image intensifier systems. The results obtained show that the contrast-detail curves for image intensifier systems with a wide range of input field diameters can be effectively normalized to be directly comparable to a common reference standard by applying the proposed alternative test conditions. The implications of this result on the interpretation of the contrast-detail test are discussed. (author)

  8. A CATALOG OF DETAILED VISUAL MORPHOLOGICAL CLASSIFICATIONS FOR 14,034 GALAXIES IN THE SLOAN DIGITAL SKY SURVEY

    International Nuclear Information System (INIS)

    Nair, Preethi B.; Abraham, Roberto G.

    2010-01-01

    We present a catalog of detailed visual classifications for 14,034 galaxies in the Sloan Digital Sky Survey (SDSS) Data Release 4 (DR4). Our sample includes nearly all spectroscopically targeted galaxies in the redshift range 0.01 < z < 0.1 down to an apparent extinction-corrected limit of g < 16 mag. In addition to T-Types, we record the existence of bars, rings, lenses, tails, warps, dust lanes, arm flocculence, and multiplicity. This sample defines a comprehensive local galaxy sample which we will use in future papers to study low-redshift morphology. It will also prove useful for calibrating automated galaxy classification algorithms. In this paper, we describe the classification methodology used, detail the systematics and biases of our sample, and summarize the overall statistical properties of the sample, noting the most obvious trends that are relevant for general comparisons of our catalog with previously published work.

  9. Revisiting Hansen Solubility Parameters by Including Thermodynamics

    NARCIS (Netherlands)

    Louwerse, Manuel J; Fernández-Maldonado, Ana María; Rousseau, Simon; Moreau-Masselon, Chloe; Roux, Bernard; Rothenberg, Gadi

    2017-01-01

    The Hansen solubility parameter approach is revisited by implementing the thermodynamics of dissolution and mixing. Hansen's pragmatic approach has earned its spurs in predicting solvents for polymer solutions, but for molecular solutes improvements are needed. By going into the details of entropy

  10. Fabrication details for wire wrapped fuel assembly components

    International Nuclear Information System (INIS)

    Bosy, B.J.

    1978-09-01

    Extensive hydraulic testing of simulated LMFBR blanket and fuel assemblies is being carried out under this MIT program. The fabrication of these test assemblies has involved development of manufacturing procedures involving the wire wrapped pins and the flow housing. The procedures are described in detail in the report

  11. The detailed snowpack scheme Crocus and its implementation in SURFEX v7

    Science.gov (United States)

    Vionnet, V.; Brun, E.; Morin, S.; Boone, A.; Faroux, S.; Le Moigne, P.; Martin, E.; Willemet, J.-M.

    2011-09-01

    Detailed studies of snow cover processes require models that offer a fine description of the snow cover properties. The detailed snowpack model Crocus is such a scheme, and has been run operationally for avalanche forecasting over the French mountains for 20 years. It is also used for climate or hydrological studies. To extend its potential applications, Crocus has been recently integrated within the framework of the externalized surface module SURFEX. SURFEX computes the exchanges of energy and mass between different types of surface, and the atmosphere and includes in particular the land surface scheme ISBA (Interactions between Soil, Biosphere, and Atmosphere). It allows Crocus to be run either in stand-alone mode, using a time series of forcing meteorological data or in fully coupled mode (explicit or fully implicit numerics) with atmospheric models ranging from meso-scale models to general circulation models. This approach also insures a full coupling between the snow cover and the soil beneath. Several applications of this new simulation platform are presented. They range from a 1D stand-alone simulation (Col de Porte, France) to fully-distributed simulations in complex terrain, either in forced mode over a whole mountain range (Massif des Grandes Rousses, France), or in coupled mode such as a snow transport simulation (Col du Lac Blanc, France), or a surface energy balance and boundary layer simulation over a polar ice cap (Dome C, Antarctica).

  12. Elliptical posts allow for detailed control of non-equibiaxial straining of cell cultures

    DEFF Research Database (Denmark)

    Olesen, Christian Gammelgaard; Pennisi, Cristian Pablo; de Zee, Mark

    2013-01-01

    tissue cells in vivo are subjected to a range of mechanical deformations including shear strain caused by activities of daily living. Shear strains are suspected to play an important role in tissue necrosis. Method The Flexcell system was redesigned using a finite element model in order to obtain large...... areas of the membrane in a controlled, uniform non-equibiaxial strain state. Results The redesign was manufactured and the resulting strains were experimentally validated by means of image analysis methods. The results showed that the system could be used for experiments varying the shear strain....... Conclusion The result allows scientists and experimentalists to apply detailed control of the strain tensor applied to tissue samples in two dimensions....

  13. Detailed IR aperture measurements

    CERN Document Server

    Bruce, Roderik; Garcia Morales, Hector; Giovannozzi, Massimo; Hermes, Pascal Dominik; Mirarchi, Daniele; Quaranta, Elena; Redaelli, Stefano; Rossi, Carlo; Skowronski, Piotr Krzysztof; Wretborn, Sven Joel; CERN. Geneva. ATS Department

    2016-01-01

    MD 1673 was carried out on October 5 2016, in order to investigate in more detail the available aperture in the LHC high-luminosity insertions at 6.5 TeV and β∗=40 cm. Previous aperture measurements in 2016 during commissioning had shown that the available aperture is at the edge of protection, and that the aperture bottleneck at β∗=40 cm in certain cases is found in the separation plane instead of in the crossing plane. Furthermore, the bottlenecks were consistently found in close to the upstream end of Q3 on the side of the incoming beam, and not in Q2 on the outgoing beam as expected from calculations. Therefore, this MD aimed at measuring IR1 and IR5 separately (at 6.5 TeV and β∗=40 cm, for 185 µrad half crossing angle), to further localize the bottlenecks longitudinally using newly installed BLMs, investigate the difference in aperture between Q2 and Q3, and to see if any aperture can be gained using special orbit bumps.

  14. Detailed balance of the Feynman micromotor

    Science.gov (United States)

    Abbott, Derek; Davis, Bruce R.; Parrondo, Juan M. R.

    1999-09-01

    One existing implication of micromotors is that they can be powered by rectifying non-equilibrium thermal fluctuations or mechanical vibrations via the so-called Feynman- micromotor. An example of mechanical rectification is found in the batteryless wristwatch. The original concept was described in as early as 1912 by Smoluchowski and was later revisited in 1963 by Feynman, in the context of rectifying thermal fluctuations to obtain useful motion. It has been shown that, although rectification is impossible at equilibrium, it is possible for the Feynman-micromotor to perform work under non-equilibrium conditions. These concepts can now be realized by MEMS technology and may have exciting implications in biomedicine - where the Feynman- micromotor can be used to power a smart pill, for example. Previously, Feynman's analysis of the motor's efficiency has been shown to be flawed by Parrondo and Espanol. We now show there are further problems in Feynman's treatment of detailed balance. In order to design and understand this device correctly, the equations of detailed balance must be found. Feynman's approach was to use probabilities based on energies and we show that this is problematic. In this paper, we demonstrate corrected equations using level crossing probabilities instead. A potential application of the Feynman-micromotor is a batteryless nanopump that consists of a small MEMS chip that adheres to the skin of a patient and dispense nanoliter quantities of medication. Either mechanical or thermal rectification via a Feynman- micromotor, as the power source, is open for possible investigation.

  15. Inbreeding coefficients and degree of consanguineous marriages in Spain: a review.

    Science.gov (United States)

    Fuster, Vicente; Colantonio, Sonia Edith

    2003-01-01

    The contribution of consanguineous marriages corresponding to uncle-niece or aunt-nephew (C12), first cousin (C22), first cousin once removed (C23), and second cousin (C33) to the inbreeding coefficient (alpha) was analyzed from a sample of Spanish areas and periods. Multiple regressions were performed taking as independent variables the different degrees of consanguinity previously selected (C12, C22, C23, and C33) and as dependent variable the inbreeding coefficient (alpha). According to the results obtained for any degree and period, rural frequencies always surpass urban. However, the pattern is similar in both areas. In the period where consanguinity was more elevated (1890-1929) the C22/C33 ratio increased. Its variation is not due to C22 and C33 changes in the same way. In rural areas, this ratio surpasses the expected value by a factor of 2-3, but in urban areas it was 7-10 times larger, in some cases due to migration. While in rural Spain the C33 frequency was approximately 1.5 times C22, in cities C22 was 1.5 times C33. The best fit among the various types of consanguineous matings and alpha involves a lineal relationship. Regardless of the number of variables contributing significantly to alpha, C22 matings are always present. Moreover, their standardized (beta) coefficients are the highest. The above indicates that this consanguineous relationship conditions the inbreeding coefficient the most. In the period of greater consanguinity, close relationships, uncle-niece C12, and first cousin once removed (C23) make a significant contribution to alpha. In rural Spain second cousins (C33) always significantly determined alpha; however, in cities the inbreeding variation was mainly due to C12 and C23. Copyright 2003 Wiley-Liss, Inc.

  16. Growth dynamics explain the development of spatiotemporal burst activity of young cultured neuronal networks in detail.

    Directory of Open Access Journals (Sweden)

    Taras A Gritsun

    Full Text Available A typical property of isolated cultured neuronal networks of dissociated rat cortical cells is synchronized spiking, called bursting, starting about one week after plating, when the dissociated cells have sufficiently sent out their neurites and formed enough synaptic connections. This paper is the third in a series of three on simulation models of cultured networks. Our two previous studies [26], [27] have shown that random recurrent network activity models generate intra- and inter-bursting patterns similar to experimental data. The networks were noise or pacemaker-driven and had Izhikevich-neuronal elements with only short-term plastic (STP synapses (so, no long-term potentiation, LTP, or depression, LTD, was included. However, elevated pre-phases (burst leaders and after-phases of burst main shapes, that usually arise during the development of the network, were not yet simulated in sufficient detail. This lack of detail may be due to the fact that the random models completely missed network topology .and a growth model. Therefore, the present paper adds, for the first time, a growth model to the activity model, to give the network a time dependent topology and to explain burst shapes in more detail. Again, without LTP or LTD mechanisms. The integrated growth-activity model yielded realistic bursting patterns. The automatic adjustment of various mutually interdependent network parameters is one of the major advantages of our current approach. Spatio-temporal bursting activity was validated against experiment. Depending on network size, wave reverberation mechanisms were seen along the network boundaries, which may explain the generation of phases of elevated firing before and after the main phase of the burst shape.In summary, the results show that adding topology and growth explain burst shapes in great detail and suggest that young networks still lack/do not need LTP or LTD mechanisms.

  17. Remembering the Specific Visual Details of Presented Objects: Neuroimaging Evidence for Effects of Emotion

    Science.gov (United States)

    Kensinger, Elizabeth A.; Schacter, Daniel L.

    2007-01-01

    Memories can be retrieved with varied amounts of visual detail, and the emotional content of information can influence the likelihood that visual detail is remembered. In the present fMRI experiment (conducted with 19 adults scanned using a 3T magnet), we examined the neural processes that correspond with recognition of the visual details of…

  18. [Data-mining characteristics of adverse drug reactions and pharmacovi-gilance of Chinese patent drugs including Aconitum herbs].

    Science.gov (United States)

    Zhang, Xiao-Meng; Li, Fan; Zhang, Bing; Chen, Xiao-Fen; Piao, Jing-Zhu

    2018-01-01

    The common Aconitum herbs in clinical application mainly include Aconiti Radix(Chuanwu), Aconiti Kusnezoffii Radix(Caowu) and Aconiti Lateralis Radix Praeparaia(Fuzi), all of which have toxicity. Therefore, the safety of using Chinese patent drugs including Aconitum herbs has become an hot topic in clinical controversy. Based on the data-mining methods, this study explored the characteristics and causes of adverse drug reactions/events (ADR/ADE) of the Chinese patent drugs including Aconitum, in order to provide pharmacovigilance and rational drug use suggestions for clinical application. The detailed ADR/ADE reports about the Chinese patent drugs including Aconitum herbs were retrieved in the domestic literature databases since 1984 to now. The information extraction and data-mining were conducted based on the platforms of Microsoft office Excel 2016, Clementine 12.0 and Cytoscape 3.3.0. Finally, 78 detailed ADR/ADE reports involving a total of 30 varieties were included. 92.31% ADR/ADE were surely or likely led by the Chinese patent drugs including Aconitum, mostly involving multiple system/organ damages with good prognosis, and even 1 case of death. The incidence of included ADRs/ADEs was associated with various factors such as the patient idiosyncratic, drug toxicity, as well as clinical medication. The patient age was most closely related to ADR/ADEs, and those aged from 60 to 69 were more easily suffered from the ADRs/ADEs of Chinese patent drugs including Aconitum. The probability of ADR/ADEs for the drugs including Chuanwu or Caowu was greater than that of Fuzi, and the using beyond the instructions dose was the most important potential safety hazard in the clinical medication process. For the regular and characteristics of ADR/ADEs led by Chinese patent drugs including Aconitum, special attention shall be paid to the elder patients or with the patients with allergies; strictly control the dosage and course of treatment, strengthen the safety medication

  19. Applicability of reflection seismic measurements in detailed characterization of crystalline bedrock

    International Nuclear Information System (INIS)

    Sireni, S.

    2011-03-01

    Posiva carried out a seismic survey in the access tunnel of the underground research facility ONKALO in 2009. The survey contributes the detailed characterization of the bedrock in the final disposal of spent nuclear fuel. The aim of this work was to examine the geophysical and geological properties of the chosen tunnel intersections to clarify the important characteristics for reflection generation, and evaluate applicability of this survey for characterization of crystalline bedrock. The seismic result consists of 24 projected amplitude images in 12 different angles. The size of an image is 260*300 m. The amount of digitized reflectors is over 100 and all of them could not be included in this work. The study was limited to 14 intersections that were considered important: brittle fault intersections, tunnel-crosscutting fractures, or lithological contacts. Presence of a brittle fault zone or a tunnel-crosscutting fracture limits the suitable bedrock volume for depositing the nuclear fuel canisters, and wide lithological contacts are a common source of reflection. The seismic data was compared to the existing geological, hydrogeological and geophysical data got from the pilot holes and the tunnel. The most important characteristics were fractures: orientation, fillings, and thickness of the fillings, alteration and water leakage. Geophysically interesting was density, seismic velocities and their products: acoustic impedance and synthetic seismograms. Calculated acoustic impedances showed some differences between cases, but they did not indicate the presence of a reflector. The most common cause of reflector was undulating slickensided, highly altered, tunnel-crosscutting fracture that had thick fracture-fillings and water present. Water was included five times in interpreted reflectors. Also few reflectors were connected to varying mineralogy. Few problematic cases occurred, where a geological feature and a reflection did not correlate, and three of the cases with

  20. Probabilistic Model for Fatigue Crack Growth in Welded Bridge Details

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Sørensen, John Dalsgaard; Yalamas, Thierry

    2013-01-01

    In the present paper a probabilistic model for fatigue crack growth in welded steel details in road bridges is presented. The probabilistic model takes the influence of bending stresses in the joints into account. The bending stresses can either be introduced by e.g. misalignment or redistribution...... of stresses in the structure. The fatigue stress ranges are estimated from traffic measurements and a generic bridge model. Based on the probabilistic models for the resistance and load the reliability is estimated for a typical welded steel detail. The results show that large misalignments in the joints can...

  1. Detailed behavioral modeling of bang-bang phase detectors

    DEFF Research Database (Denmark)

    Jiang, Chenhui; Andreani, Pietro; Keil, U. D.

    2006-01-01

    In this paper, the metastability of current-mode logic (CML) latches and flip-flops is studied in detail. Based on the results of this analysis, a behavioral model of bang-bang phase detectors (BBPDs) is proposed, which is able to reliably capture the critical deadzone effect. The impact of jitter...

  2. Satellite telemetry of Afrotropical ducks: methodological details and ...

    African Journals Online (AJOL)

    Despite widespread and increasing use of solarpowered satellite transmitters to tag wild birds, there are few published articles that detail how transmitters should be attached to different species and even fewer assessments of the overall field success of telemetry projects. The scarcity of this information makes it difficult to ...

  3. Personal Hearing Protection including Active Noise Reduction (Les dispositifs de protection de l'ouie, y compris l'attenuation du bruit actif) (CD-ROM)

    National Research Council Canada - National Science Library

    Steeneken, H. J; Dancer, A; McKinley, R; Buck, K; James, S

    2005-01-01

    .... SYSTEMS DETAIL NOTE: Adobe Acrobat Reader is included on disc. ABSTRACT: Personal hearing protection and speech communication facilities are essential for optimal performance in military operations...

  4. Reliability of the detailed assessment of speed of handwriting on Flemish children.

    Science.gov (United States)

    Simons, Johan; Probst, Michel

    2014-01-01

    This study evaluates the reliability of the Detailed Assessment of Speed of Handwriting (DASH) in a Dutch-speaking sample of children. The sample included 650 boys and 513 girls (age range = 9-16 years). Handwriting speed measurements were obtained using the DASH. Interrater agreement, test-retest reliability, and internal consistency were calculated; gender and age effects were analyzed. Interrater agreement shows excellent reliability with intraclass correlation coefficients of at least 0.94. Test-retest correlations ranged from r = 0.65 to r = 0.81. The internal consistency measures, calculated with Cronbach's alpha, were between 0.88 and 0.94. Both gender and age have a significant effect on handwriting speed, with F (7.1144) = 17.43 (P handwriting speed of Dutch-speaking children. There is a tendency of girls to write faster than boys.

  5. Prediction of Detailed Enzyme Functions and Identification of Specificity Determining Residues by Random Forests

    Science.gov (United States)

    Nagao, Chioko; Nagano, Nozomi; Mizuguchi, Kenji

    2014-01-01

    Determining enzyme functions is essential for a thorough understanding of cellular processes. Although many prediction methods have been developed, it remains a significant challenge to predict enzyme functions at the fourth-digit level of the Enzyme Commission numbers. Functional specificity of enzymes often changes drastically by mutations of a small number of residues and therefore, information about these critical residues can potentially help discriminate detailed functions. However, because these residues must be identified by mutagenesis experiments, the available information is limited, and the lack of experimentally verified specificity determining residues (SDRs) has hindered the development of detailed function prediction methods and computational identification of SDRs. Here we present a novel method for predicting enzyme functions by random forests, EFPrf, along with a set of putative SDRs, the random forests derived SDRs (rf-SDRs). EFPrf consists of a set of binary predictors for enzymes in each CATH superfamily and the rf-SDRs are the residue positions corresponding to the most highly contributing attributes obtained from each predictor. EFPrf showed a precision of 0.98 and a recall of 0.89 in a cross-validated benchmark assessment. The rf-SDRs included many residues, whose importance for specificity had been validated experimentally. The analysis of the rf-SDRs revealed both a general tendency that functionally diverged superfamilies tend to include more active site residues in their rf-SDRs than in less diverged superfamilies, and superfamily-specific conservation patterns of each functional residue. EFPrf and the rf-SDRs will be an effective tool for annotating enzyme functions and for understanding how enzyme functions have diverged within each superfamily. PMID:24416252

  6. The detailed snowpack scheme Crocus and its implementation in SURFEX v7.2

    Science.gov (United States)

    Vionnet, V.; Brun, E.; Morin, S.; Boone, A.; Faroux, S.; Le Moigne, P.; Martin, E.; Willemet, J.-M.

    2012-05-01

    Detailed studies of snow cover processes require models that offer a fine description of the snow cover properties. The detailed snowpack model Crocus is such a scheme, and has been run operationally for avalanche forecasting over the French mountains for 20 yr. It is also used for climate or hydrological studies. To extend its potential applications, Crocus has been recently integrated within the framework of the externalized surface module SURFEX. SURFEX computes the exchanges of energy and mass between different types of surface and the atmosphere. It includes in particular the land surface scheme ISBA (Interactions between Soil, Biosphere, and Atmosphere). It allows Crocus to be run either in stand-alone mode, using a time series of forcing meteorological data or in fully coupled mode (explicit or fully implicit numerics) with atmospheric models ranging from meso-scale models to general circulation models. This approach also ensures a full coupling between the snow cover and the soil beneath. Several applications of this new simulation platform are presented. They range from a 1-D stand-alone simulation (Col de Porte, France) to fully-distributed simulations in complex terrain over a whole mountain range (Massif des Grandes Rousses, France), or in coupled mode such as a surface energy balance and boundary layer simulation over the East Antarctic Ice Sheet (Dome C).

  7. Selection of detailed items for periodic safety review on PWR radwaste management system

    Energy Technology Data Exchange (ETDEWEB)

    Sung, K. B.; Ahn, Y. S.; Park, Y. S.; Kim, S. H.; Kim, J. T. [Korea Hydric and Nuclear Power Company, Taejon (Korea, Republic of)

    2003-10-01

    Selection of detailed-items for Periodic Safety Review on PWR radwaste management system, the main component could be faithfully clarified according to the purpose of establishment on each system and basic purpose. It is proper to select detailed-items those of radioactivities in the reactor coolant activity levels and the released volume of liquid and gaseous radioactive material on safety performance. It's also proper to select solid radwaste production quantities as detailed-item that it would be predict the next ten years trends after PSR.

  8. Quality of referral: What information should be included in a request for diagnostic imaging when a patient is referred to a clinical radiologist?

    Science.gov (United States)

    G Pitman, Alexander

    2017-06-01

    Referral to a clinical radiologist is the prime means of communication between the referrer and the radiologist. Current Australian and New Zealand government regulations do not prescribe what clinical information should be included in a referral. This work presents a qualitative compilation of clinical radiologist opinion, relevant professional recommendations, governmental regulatory positions and prior work on diagnostic error to synthesise recommendations on what clinical information should be included in a referral. Recommended requirements on what clinical information should be included in a referral to a clinical radiologist are as follows: an unambiguous referral; identity of the patient; identity of the referrer; and sufficient clinical detail to justify performance of the diagnostic imaging examination and to confirm appropriate choice of the examination and modality. Recommended guideline on the content of clinical detail clarifies when the information provided in a referral meets these requirements. High-quality information provided in a referral allows the clinical radiologist to ensure that exposure of patients to medical radiation is justified. It also minimises the incidence of perceptual and interpretational diagnostic error. Recommended requirements and guideline on the clinical detail to be provided in a referral to a clinical radiologist have been formulated for professional debate and adoption. © 2017 The Royal Australian and New Zealand College of Radiologists.

  9. Implementing academic detailing for breast cancer screening in underserved communities

    Directory of Open Access Journals (Sweden)

    Ashford Alfred R

    2007-12-01

    Full Text Available Abstract Background African American and Hispanic women, such as those living in the northern Manhattan and the South Bronx neighborhoods of New York City, are generally underserved with regard to breast cancer prevention and screening practices, even though they are more likely to die of breast cancer than are other women. Primary care physicians (PCPs are critical for the recommendation of breast cancer screening to their patients. Academic detailing is a promising strategy for improving PCP performance in recommending breast cancer screening, yet little is known about the effects of academic detailing on breast cancer screening among physicians who practice in medically underserved areas. We assessed the effectiveness of an enhanced, multi-component academic detailing intervention in increasing recommendations for breast cancer screening within a sample of community-based urban physicians. Methods Two medically underserved communities were matched and randomized to intervention and control arms. Ninety-four primary care community (i.e., not hospital based physicians in northern Manhattan were compared to 74 physicians in the South Bronx neighborhoods of the New York City metropolitan area. Intervention participants received enhanced physician-directed academic detailing, using the American Cancer Society guidelines for the early detection of breast cancer. Control group physicians received no intervention. We conducted interviews to measure primary care physicians' self-reported recommendation of mammography and Clinical Breast Examination (CBE, and whether PCPs taught women how to perform breast self examination (BSE. Results Using multivariate analyses, we found a statistically significant intervention effect on the recommendation of CBE to women patients age 40 and over; mammography and breast self examination reports increased across both arms from baseline to follow-up, according to physician self-report. At post-test, physician

  10. 34 CFR 5.16 - Deletion of identifying details.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Deletion of identifying details. 5.16 Section 5.16 Education Office of the Secretary, Department of Education AVAILABILITY OF INFORMATION TO THE PUBLIC PURSUANT TO PUB. L. 90-23 (Eff. until 7-14-10) What Records Are Available § 5.16 Deletion of identifying...

  11. Level of detail in 3D city models

    NARCIS (Netherlands)

    Biljecki, F.

    2017-01-01

    The concept of level of detail (LOD) describes the content of 3D city models and it plays an essential role during their life cycle. On one hand it comes akin to the concepts of scale in cartography and LOD in computer graphics, on the other hand it is a standalone concept that requires attention.

  12. Development of a global computable general equilibrium model coupled with detailed energy end-use technology

    International Nuclear Information System (INIS)

    Fujimori, Shinichiro; Masui, Toshihiko; Matsuoka, Yuzuru

    2014-01-01

    Highlights: • Detailed energy end-use technology information is considered within a CGE model. • Aggregated macro results of the detailed model are similar to traditional model. • The detailed model shows unique characteristics in the household sector. - Abstract: A global computable general equilibrium (CGE) model integrating detailed energy end-use technologies is developed in this paper. The paper (1) presents how energy end-use technologies are treated within the model and (2) analyzes the characteristics of the model’s behavior. Energy service demand and end-use technologies are explicitly considered, and the share of technologies is determined by a discrete probabilistic function, namely a Logit function, to meet the energy service demand. Coupling with detailed technology information enables the CGE model to have more realistic representation in the energy consumption. The proposed model in this paper is compared with the aggregated traditional model under the same assumptions in scenarios with and without mitigation roughly consistent with the two degree climate mitigation target. Although the results of aggregated energy supply and greenhouse gas emissions are similar, there are three main differences between the aggregated and the detailed technologies models. First, GDP losses in mitigation scenarios are lower in the detailed technology model (2.8% in 2050) as compared with the aggregated model (3.2%). Second, price elasticity and autonomous energy efficiency improvement are heterogeneous across regions and sectors in the detailed technology model, whereas the traditional aggregated model generally utilizes a single value for each of these variables. Third, the magnitude of emissions reduction and factors (energy intensity and carbon factor reduction) related to climate mitigation also varies among sectors in the detailed technology model. The household sector in the detailed technology model has a relatively higher reduction for both energy

  13. Detailed observations of NGC 4151 with IUE

    International Nuclear Information System (INIS)

    Bromage, G.E.; Boksenberg, A.; Clavel, J.

    1984-12-01

    A detailed analysis is presented of the ultraviolet (lambdalambda 1150-3200 A) absorption spectrum of the NGC 4151 Seyfert nucleus. The IUE data base consisted of high dispersion (Δlambda approx. 0.2 A) spectra at 5 epochs, and 137 low dispersion (Δlambda approx. 4-8 A) spectra at 31 epochs from 1978 February to 1980 May, together with further low dispersion data in 1980-81 with NGC 4151 in a very faint quiescent state. (author)

  14. Detailed design of product oriented manufacturing systems

    OpenAIRE

    Silva, Sílvio Carmo; Alves, Anabela Carvalho

    2006-01-01

    This paper presents a procedure for the detailed design and redesign of manufacturing systems within a framework of constantly fitting production system configuration to the varying production needs of products. With such an approach is achieved the design of Product Oriented Manufacturing Systems – POMS. This approach is in opposition to the fitting, before hand, of a production system to all products within a company. In this case is usual to adopt a Function Oriented Manufactur...

  15. A NEW GENERATION OF PARSEC-COLIBRI STELLAR ISOCHRONES INCLUDING THE TP-AGB PHASE

    International Nuclear Information System (INIS)

    Marigo, Paola; Aringer, Bernhard; Chen, Yang; Dussin, Marco; Nanni, Ambra; Pastorelli, Giada; Rodrigues, Thaíse S.; Trabucchi, Michele; Bladh, Sara; Montalbán, Josefina; Girardi, Léo; Bressan, Alessandro; Rosenfield, Philip; Dalcanton, Julianne; Groenewegen, Martin A. T.; Wood, Peter R.

    2017-01-01

    We introduce a new generation of PARSEC–COLIBRI stellar isochrones that includes a detailed treatment of the thermally pulsing asymptotic giant branch (TP-AGB) phase, covering a wide range of initial metallicities (0.0001 < Z i < 0.06). Compared to previous releases, the main novelties and improvements are use of new TP-AGB tracks and related atmosphere models and spectra for M and C-type stars; inclusion of the surface H+He+CNO abundances in the isochrone tables, accounting for the effects of diffusion, dredge-up episodes and hot-bottom burning; inclusion of complete thermal pulse cycles, with a complete description of the in-cycle changes in the stellar parameters; new pulsation models to describe the long-period variability in the fundamental and first-overtone modes; and new dust models that follow the growth of the grains during the AGB evolution, in combination with radiative transfer calculations for the reprocessing of the photospheric emission. Overall, these improvements are expected to lead to a more consistent and detailed description of properties of TP-AGB stars expected in resolved stellar populations, especially in regard to their mean photometric properties from optical to mid-infrared wavelengths. We illustrate the expected numbers of TP-AGB stars of different types in stellar populations covering a wide range of ages and initial metallicities, providing further details on the “C-star island” that appears at intermediate values of age and metallicity, and about the AGB-boosting effect that occurs at ages close to 1.6-Gyr for populations of all metallicities. The isochrones are available through a new dedicated web server.

  16. A NEW GENERATION OF PARSEC-COLIBRI STELLAR ISOCHRONES INCLUDING THE TP-AGB PHASE

    Energy Technology Data Exchange (ETDEWEB)

    Marigo, Paola; Aringer, Bernhard; Chen, Yang; Dussin, Marco; Nanni, Ambra; Pastorelli, Giada; Rodrigues, Thaíse S.; Trabucchi, Michele; Bladh, Sara; Montalbán, Josefina [Dipartimento di Fisica e Astronomia Galileo Galilei, Università di Padova, Vicolo dell’Osservatorio 3, I-35122 Padova (Italy); Girardi, Léo [Osservatorio Astronomico di Padova—INAF, Vicolo dell’Osservatorio 5, I-35122 Padova (Italy); Bressan, Alessandro [SISSA, via Bonomea 365, I-34136 Trieste (Italy); Rosenfield, Philip [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Dalcanton, Julianne [Department of Astronomy, University of Washington, Box 351580, Seattle, WA 98195 (United States); Groenewegen, Martin A. T. [Koninklijke Sterrenwacht van België, Ringlaan 3, B-1180 Brussels (Belgium); Wood, Peter R. [Research School of Astronomy and Astrophysics, Australian National University, Cotter Road, Weston Creek, ACT 2611 (Australia)

    2017-01-20

    We introduce a new generation of PARSEC–COLIBRI stellar isochrones that includes a detailed treatment of the thermally pulsing asymptotic giant branch (TP-AGB) phase, covering a wide range of initial metallicities (0.0001 < Z {sub i} < 0.06). Compared to previous releases, the main novelties and improvements are use of new TP-AGB tracks and related atmosphere models and spectra for M and C-type stars; inclusion of the surface H+He+CNO abundances in the isochrone tables, accounting for the effects of diffusion, dredge-up episodes and hot-bottom burning; inclusion of complete thermal pulse cycles, with a complete description of the in-cycle changes in the stellar parameters; new pulsation models to describe the long-period variability in the fundamental and first-overtone modes; and new dust models that follow the growth of the grains during the AGB evolution, in combination with radiative transfer calculations for the reprocessing of the photospheric emission. Overall, these improvements are expected to lead to a more consistent and detailed description of properties of TP-AGB stars expected in resolved stellar populations, especially in regard to their mean photometric properties from optical to mid-infrared wavelengths. We illustrate the expected numbers of TP-AGB stars of different types in stellar populations covering a wide range of ages and initial metallicities, providing further details on the “C-star island” that appears at intermediate values of age and metallicity, and about the AGB-boosting effect that occurs at ages close to 1.6-Gyr for populations of all metallicities. The isochrones are available through a new dedicated web server.

  17. Devil's in the (diffuse) detail

    International Nuclear Information System (INIS)

    Welberry, R.

    2006-07-01

    X-ray crystallography is an important workhorse in the world of solid-state chemistry. However, while it's a powerful tool in determining the average structure in a crystal lattice, conventional crystallography is very limited when it comes to understanding nano-scale disorder within that crystal structure. And when it comes to understanding the properties of many important materials, the devil is in the detail. X-ray diffraction is still one of the keys to understanding this finer scale structure but using it requires a capacity to read between the lines - to understand the diffuse diffraction that most crystallography ignores. Scientists at the Research School of Chemistry are leading the world in this field. Their work on modelling nano-scaled disorder using diffuse diffraction is opening up new possibilities in understanding and modifying many of our most important materials

  18. Imaging the internal structure of fluid upflow zones with detailed digital Parasound echosounder surveys

    Science.gov (United States)

    Spiess, V.; Zuehlsdorff, L.; von Lom-Keil, H.; Schwenk, T.

    2001-12-01

    Sites of venting fluids both with continuous and episodic supply often reveal complex surface and internal structures, which are difficult to image and cause problems to transfer results from local sampling towards a structural reconstruction and a quantification of (average) flux rates. Detailed acoustic and seismic surveys would be required to retrieve this information, but also an appropriate environment, where fluid migration can be properly imaged from contrasts to unaffected areas. Hemipelagic sediments are most suitable, since typically reflectors are coherent and of low lateral amplitude variation and structures are continuous over distances much longer than the scale of fluid migration features. During RV Meteor Cruise M473 and RV Sonne Cruise SO 149 detailed studies were carried out in the vicinity of potential fluid upflow zones in the Lower Congo Basin at 5oS in 3000 m water depth and at the Northern Cascadia Margin in 1000 m water depth. Unexpected sampling of massive gas hydrates from the sea floor as well as of carbonate concretions, shell fragments and different liveforms indicated active fluid venting in a typically hemipelagic realm. The acoustic signature of such zones includes columnar blanking, pockmark depressions at the sea floor, association with small offset faults (ParaDigMA System for further processing and display, to image the spatial structure of the upflow zones. Due to the high data density amplitudes and other acoustic properties could be investigated in a 3D volume and time slices as well as reflector surfaces were analyzed. Pronounced lateral variations of reflection amplitudes within a complex pattern indicate potential pathways for fluid/gas migration and occurrences of near-surface gas hydrate deposits, which may be used to trace detailed surface evidence from side scan sonar imaging down to depth and support dedicated sampling.

  19. Author Details

    African Journals Online (AJOL)

    Chinuwo, T. Vol 55, No 1 (2007) - Articles Grazing capacity estimates: why include biomass estimates from arable lands? Abstract · Vol 57, No 3 (2009) - Articles A synopsis of cattle performance in Zimbabwe's 'initial' resettlement areas after land reforms and redistribution. Abstract. ISSN: 0378-9721. AJOL African Journals ...

  20. Establishment of detailed eye model of adult chinese male and dose conversion coefficients calculation under neutron exposure

    International Nuclear Information System (INIS)

    Zhu, Hongyu; Qiu, Rui; Ren, Li; Zhang, Hui; Li, Junli; Wu, Zhen; Li, Chunyan

    2017-01-01

    The human eye lens is sensitive to radiation. ICRP-118 publication recommended a reduction of the occupational annual equivalent dose limit from 150 to 20 mSv, averaged over defined periods of 5 y. Therefore, it is very important to build a detailed eye model for the accurate dose assessment and radiation risk evaluation of eye lens. In this work, a detailed eye model was build based on the characteristic anatomic parameters of the Chinese adult male. This eye model includes seven main structures, which are scleral, choroid, lens, iris, cornea, vitreous body and aqueous humor. The lens was divided into sensitive volume and insensitive volume based on different cell populations. The detailed eye model was incorporated into the converted polygon-mesh version of the Chinese reference adult male whole-body surface model. After the incorporation, dose conversion coefficients for the eye lens were calculated for neutron exposure at AP, PA and LAT geometries with Geant4, the neutron energies were from 0.001 eV to 10 MeV. The calculated lens dose coefficients were compared with those of ICRP-116 publication. Significant differences up to 97.47% were found at PA geometry. This could mainly be attributed to the different geometry characteristic of eye model and parameters of head in different phantom between the present work and ICRP-116 publication. (authors)

  1. Light water reactor fuel analysis code. FEMAXI-6 (Ver.1). Detailed structure and user's manual

    International Nuclear Information System (INIS)

    Suzuki, Motoe; Saitou, Hiroaki

    2006-02-01

    A light water reactor fuel analysis code FEMAXI-6 is an advanced version which has been produced by integrating the former version FEMAXI-V with numerous functional improvements and extensions. In particular, the FEMAXI-6 code has attained a complete coupled solution of thermal analysis and mechanical analysis, enabling an accurate prediction of pellet-clad gap size and PCMI in high burnup fuel rods. Also, such new models have been implemented as pellet-clad bonding and fission gas bubble swelling, and linkage function with detailed burning analysis code has been enhanced. Furthermore, a number of new materials properties and parameters have been introduced. With these advancements, the FEMAXI-6 code has been upgraded to a versatile analytical tool for high burnup fuel behavior not only in the normal operation but also in anticipated transient conditions. This report describes in detail the design, basic theory and structure, models and numerical method, improvements and extensions, and method of model modification. In order to facilitate effective and wide-ranging application of the code, formats and methods of input/output of the code are also described, and a sample output in an actual form is included. (author)

  2. DETAILED MODELLING OF CHARGING BEHAVIOUR OF SMART SOLAR TANKS

    DEFF Research Database (Denmark)

    Fan, Jianhua; Andersen, Elsa; Furbo, Simon

    2010-01-01

    The charging behaviour of smart solar tanks for solar combisystems for one-family houses is investigated with detailed Computational Fluid Dynamics (CFD) modelling and Particle Image Velocimetry (PIV) measurements. The smart solar tank can be charged with a variable auxiliary volume fitted...... or by an electric heating element in a side-arm mounted on the side of the tank. Detailed CFD models of the smart tanks are built with different mesh densities in the tank and in the side-arm. The thermal conditions of the tank during charging are calculated with the CFD models. The fluid flow and temperature...... by the mesh densities, the distribution of computational cells, the physical model and time steps used in the simulations. The findings of the investigations will be used as guidance for creation of CFD models for optimal design of smart solar tanks....

  3. A detailed phylogeny for the Methanomicrobiales

    Science.gov (United States)

    Rouviere, P.; Mandelco, L.; Winker, S.; Woese, C. R.

    1992-01-01

    The small subunit rRNA sequence of twenty archaea, members of the Methanomicrobiales, permits a detailed phylogenetic tree to be inferred for the group. The tree confirms earlier studies, based on far fewer sequences, in showing the group to be divided into two major clusters, temporarily designated the "methanosarcina" group and the "methanogenium" group. The tree also defines phylogenetic relationships within these two groups, which in some cases do not agree with the phylogenetic relationships implied by current taxonomic names--a problem most acute for the genus Methanogenium and its relatives. The present phylogenetic characterization provides the basis for a consistent taxonomic restructuring of this major methanogenic taxon.

  4. Author Details

    African Journals Online (AJOL)

    Vol 33, No 3 (2003) - Articles The growth and carcass and meat characteristics of pigs raised in a free-range or conventional housing system ... Vol 44, No 5 (2014) - Articles The effect of different dietary vitamin and mineral levels on certain production parameters, including egg shell characteristics of breeding ostriches

  5. An examination of the association between interviewer question type and story-grammar detail in child witness interviews about abuse.

    Science.gov (United States)

    Feltis, Brooke B; Powell, Martine B; Snow, Pamela C; Hughes-Scholes, Carolyn H

    2010-06-01

    This study compared the effects of open-ended versus specific questions, and various types of open-ended questions, in eliciting story-grammar detail in child abuse interviews. The sample included 34 police interviews with child witnesses aged 5-15 years (M age=9 years, 9 months). The interviewers' questions and their relative sub-types were classified according to definitions reported in the child interview training literature. The children's responses were classified according to the proportion of story grammar and the prevalence of individual story grammar elements as defined by Stein and Glenn (1979). Open-ended questions were more effective at eliciting story grammar than specific questions. This finding was revealed across three age groups, two interview phases and irrespective of how question effectiveness was measured. However, not all types of open-ended questions were equally effective. Open-ended questions that encouraged a broad response, or asked the child to elaborate on a part of their account, elicited more story-grammar detail compared to open-ended questions that requested clarification of concepts or descriptions of the next (or another) activity or detail within a sequence. This study demonstrates that children's ability to provide story-grammar detail is maximised when there is minimal prompting from the interviewer. Given the association between story grammar production and victim credibility, greater guidance is warranted in interviewer training programs in relation to the effects and administration of different types of open-ended questions. Copyright 2010 Elsevier Ltd. All rights reserved.

  6. Use of Academic Detailing With Audit and Feedback to Improve Antipsychotic Pharmacotherapy.

    Science.gov (United States)

    Brunette, Mary F; Cotes, Robert O; de Nesnera, Alexander; McHugo, Gregory; Dzebisashvili, Nino; Xie, Haiyi; Bartels, Stephen J

    2018-06-08

    Second-generation antipsychotics vary in their propensity to cause serious cardiometabolic side effects. In addition, use of two or more antipsychotics (polypharmacy) may lead to additive side effects and has not been shown to be consistently more effective than monotherapy. This study examined the use of academic detailing with audit and feedback to improve antipsychotic prescribing practices, including antipsychotic polypharmacy and utilization of medication with high or low risk of cardiometabolic side effects ("high risk" or "low risk," respectively). Four intervention sessions were provided over two years to psychiatric care providers at community mental health centers. Segmented regression within the general estimating equation model framework used Medicaid pharmacy claims to examine prescribing patterns before and after the intervention among all beneficiaries (67,721 person-months) over a five-year period. After the intervention, 10.9% of beneficiaries with antipsychotic claims were on polypharmacy, compared with 13.1% before the invention. Use of high-risk and low-risk antipsychotics did not change. The final adjusted polypharmacy model showed that antipsychotic polypharmacy decreased among young adults and adults ages 40 or older compared with beneficiaries ages 30-39 (β=-.02, p=.04, and β=-.02, p=.007, respectively). The raw proportion of beneficiaries on high- and low-risk agents did not change, although final adjusted models demonstrated changes in use of high- and low-risk agents by diagnosis and risk group. Polypharmacy decreased among young and older adults after academic detailing with audit and feedback. Although further research is needed, this low-intensity intervention may help mental health systems reduce antipsychotic polypharmacy.

  7. Escape rate for nonequilibrium processes dominated by strong non-detailed balance force

    Science.gov (United States)

    Tang, Ying; Xu, Song; Ao, Ping

    2018-02-01

    Quantifying the escape rate from a meta-stable state is essential to understand a wide range of dynamical processes. Kramers' classical rate formula is the product of an exponential function of the potential barrier height and a pre-factor related to the friction coefficient. Although many applications of the rate formula focused on the exponential term, the prefactor can have a significant effect on the escape rate in certain parameter regions, such as the overdamped limit and the underdamped limit. There have been continuous interests to understand the effect of non-detailed balance on the escape rate; however, how the prefactor behaves under strong non-detailed balance force remains elusive. In this work, we find that the escape rate formula has a vanishing prefactor with decreasing friction strength under the strong non-detailed balance limit. We both obtain analytical solutions in specific examples and provide a derivation for more general cases. We further verify the result by simulations and propose a testable experimental system of a charged Brownian particle in electromagnetic field. Our study demonstrates that a special care is required to estimate the effect of prefactor on the escape rate when non-detailed balance force dominates.

  8. Visual long-term memory has a massive storage capacity for object details.

    Science.gov (United States)

    Brady, Timothy F; Konkle, Talia; Alvarez, George A; Oliva, Aude

    2008-09-23

    One of the major lessons of memory research has been that human memory is fallible, imprecise, and subject to interference. Thus, although observers can remember thousands of images, it is widely assumed that these memories lack detail. Contrary to this assumption, here we show that long-term memory is capable of storing a massive number of objects with details from the image. Participants viewed pictures of 2,500 objects over the course of 5.5 h. Afterward, they were shown pairs of images and indicated which of the two they had seen. The previously viewed item could be paired with either an object from a novel category, an object of the same basic-level category, or the same object in a different state or pose. Performance in each of these conditions was remarkably high (92%, 88%, and 87%, respectively), suggesting that participants successfully maintained detailed representations of thousands of images. These results have implications for cognitive models, in which capacity limitations impose a primary computational constraint (e.g., models of object recognition), and pose a challenge to neural models of memory storage and retrieval, which must be able to account for such a large and detailed storage capacity.

  9. Detailed Characteristics of Radiation Belt Electrons Revealed by CSSWE/REPTile Measurements

    Science.gov (United States)

    Zhang, K.; Li, X.; Schiller, Q.; Gerhardt, D. T.; Millan, R. M.

    2016-12-01

    The outer radiation belt electrons are highly dynamic. We study the detailed characteristics of the relativistic electrons in the outer belt using measurements from the Colorado Student Space Weather Experiment (CSSWE) mission, a low Earth orbit Cubesat, which transverses the radiation belt four times in one orbit ( 1.5 hr) and has the advantage of measuring the dynamic activities of the electrons including their rapid precipitations. Among the features of the relativistic electrons, we show the measured electron distribution as a function of geomagnetic activities and local magnetic field strength. Moreover, a specific precipitation band, which happened on 19 Jan 2013, is investigated based on the conjunctive measurement of CSSWE and the Balloon Array for Radiation belt Relativistic Electron Losses (BARREL). In this precipitation band event, the net loss of the 0.58 1.63 MeV electrons (L=3.5 6) is estimated to account for 6.84% of the total electron content.

  10. Reserving by detailed conditioning on individual claim

    Science.gov (United States)

    Kartikasari, Mujiati Dwi; Effendie, Adhitya Ronnie; Wilandari, Yuciana

    2017-03-01

    The estimation of claim reserves is an important activity in insurance companies to fulfill their liabilities. Recently, reserving method of individual claim have attracted a lot of interest in the actuarial science, which overcome some deficiency of aggregated claim method. This paper explores the Reserving by Detailed Conditioning (RDC) method using all of claim information for reserving with individual claim of liability insurance from an Indonesian general insurance company. Furthermore, we compare it to Chain Ladder and Bornhuetter-Ferguson method.

  11. Patterns of Communication through Interpreters: A Detailed Sociolinguistic Analysis

    Science.gov (United States)

    Aranguri, Cesar; Davidson, Brad; Ramirez, Robert

    2006-01-01

    BACKGROUND Numerous articles have detailed how the presence of an interpreter leads to less satisfactory communication with physicians; few have studied how actual communication takes place through an interpreter in a clinical setting. OBJECTIVE Record and analyze physician-interpreter-patient interactions. DESIGN Primary care physicians with high-volume Hispanic practices were recruited for a communication study. Dyslipidemic Hispanic patients, either monolingual Spanish or bilingual Spanish-English, were recruited on the day of a normally scheduled appointment and, once consented, recorded without a researcher present in the room. Separate postvisit interviews were conducted with the patient and the physician. All interactions were fully transcribed and analyzed. PARTICIPANTS Sixteen patients were recorded interacting with 9 physicians. Thirteen patients used an interpreter with 8 physicians, and 3 patients spoke Spanish with the 1 bilingual physician. APPROACH Transcript analysis based on sociolinguistic and discourse analytic techniques, including but not limited to time speaking, analysis of questions asked and answered, and the loss of semantic information. RESULTS Speech was significantly reduced and revised by the interpreter, resulting in an alteration of linguistic features such as content, meaning, reinforcement/validation, repetition, and affect. In addition, visits that included an interpreter had virtually no rapport-building “small talk,” which typically enables the physician to gain comprehensive patient history, learn clinically relevant information, and increase emotional engagement in treatment. CONCLUSIONS The presence of an interpreter increases the difficulty of achieving good physician-patient communication. Physicians and interpreters should be trained in the process of communication and interpretation, to minimize conversational loss and maximize the information and relational exchange with interpreted patients. PMID:16808747

  12. Effects of emotional context on memory for details: the role of attention.

    Science.gov (United States)

    Kim, Johann Sung-Cheul; Vossel, Gerhard; Gamer, Matthias

    2013-01-01

    It was repeatedly demonstrated that a negative emotional context enhances memory for central details while impairing memory for peripheral information. This trade-off effect is assumed to result from attentional processes: a negative context seems to narrow attention to central information at the expense of more peripheral details, thus causing the differential effects in memory. However, this explanation has rarely been tested and previous findings were partly inconclusive. For the present experiment 13 negative and 13 neutral naturalistic, thematically driven picture stories were constructed to test the trade-off effect in an ecologically more valid setting as compared to previous studies. During an incidental encoding phase, eye movements were recorded as an index of overt attention. In a subsequent recognition phase, memory for central and peripheral details occurring in the picture stories was tested. Explicit affective ratings and autonomic responses validated the induction of emotion during encoding. Consistent with the emotional trade-off effect on memory, encoding context differentially affected recognition of central and peripheral details. However, contrary to the common assumption, the emotional trade-off effect on memory was not mediated by attentional processes. By contrast, results suggest that the relevance of attentional processing for later recognition memory depends on the centrality of information and the emotional context but not their interaction. Thus, central information was remembered well even when fixated very briefly whereas memory for peripheral information depended more on overt attention at encoding. Moreover, the influence of overt attention on memory for central and peripheral details seems to be much lower for an arousing as compared to a neutral context.

  13. Using ecological zones to increase the detail of Landsat classifications

    Science.gov (United States)

    Fox, L., III; Mayer, K. E.

    1981-01-01

    Changes in classification detail of forest species descriptions were made for Landsat data on 2.2 million acres in northwestern California. Because basic forest canopy structures may exhibit very similar E-M energy reflectance patterns in different environmental regions, classification labels based on Landsat spectral signatures alone become very generalized when mapping large heterogeneous ecological regions. By adding a seven ecological zone stratification, a 167% improvement in classification detail was made over the results achieved without it. The seven zone stratification is a less costly alternative to the inclusion of complex collateral information, such as terrain data and soil type, into the Landsat data base when making inventories of areas greater than 500,000 acres.

  14. Program plan for the DOE Office of Fusion Energy First Wall/Blanket/Shield Engineering Technology Program. Volume II. Detailed technical plan. Revision 2

    International Nuclear Information System (INIS)

    1982-08-01

    The four sections which comprise Part II describe in detail the technical basis for each of the four Program Elements (PE's) of the FWBS Engineering Technology Program (ETP). Each PE is planned to be executed in a number of phases. The purpose of the DTP's is to delineate detailed near-term research, development, and testing required to establish a FWBS engineering data base. Optimum testing strategies and construction of test facilities where needed are identified. The DTP's are based on guidelines given by Argonne National Laboratory which included the basic programmatic goals and the requirements for the types of tests and test conditions

  15. Detailed modeling of superconducting magnetic energy storage (SMES) system

    NARCIS (Netherlands)

    Chen, L.; Liu, Y.; Arsoy, A.B.; Ribeiro, P.F.; Steurer, M.; Iravani, M.R.

    2006-01-01

    This paper presents a detailed model for simulation of a Superconducting Magnetic Energy Storage (SMES) system. SMES technology has the potential to bring real power storage characteristic to the utility transmission and distribution systems. The principle of SMES system operation is reviewed in

  16. Multi-sparse dictionary colorization algorithm based on the feature classification and detail enhancement

    Science.gov (United States)

    Yan, Dan; Bai, Lianfa; Zhang, Yi; Han, Jing

    2018-02-01

    For the problems of missing details and performance of the colorization based on sparse representation, we propose a conceptual model framework for colorizing gray-scale images, and then a multi-sparse dictionary colorization algorithm based on the feature classification and detail enhancement (CEMDC) is proposed based on this framework. The algorithm can achieve a natural colorized effect for a gray-scale image, and it is consistent with the human vision. First, the algorithm establishes a multi-sparse dictionary classification colorization model. Then, to improve the accuracy rate of the classification, the corresponding local constraint algorithm is proposed. Finally, we propose a detail enhancement based on Laplacian Pyramid, which is effective in solving the problem of missing details and improving the speed of image colorization. In addition, the algorithm not only realizes the colorization of the visual gray-scale image, but also can be applied to the other areas, such as color transfer between color images, colorizing gray fusion images, and infrared images.

  17. Exploring Architectural Details Through a Wearable Egocentric Vision Device.

    Science.gov (United States)

    Alletto, Stefano; Abati, Davide; Serra, Giuseppe; Cucchiara, Rita

    2016-02-17

    Augmented user experiences in the cultural heritage domain are in increasing demand by the new digital native tourists of 21st century. In this paper, we propose a novel solution that aims at assisting the visitor during an outdoor tour of a cultural site using the unique first person perspective of wearable cameras. In particular, the approach exploits computer vision techniques to retrieve the details by proposing a robust descriptor based on the covariance of local features. Using a lightweight wearable board, the solution can localize the user with respect to the 3D point cloud of the historical landmark and provide him with information about the details at which he is currently looking. Experimental results validate the method both in terms of accuracy and computational effort. Furthermore, user evaluation based on real-world experiments shows that the proposal is deemed effective in enriching a cultural experience.

  18. Exploring Architectural Details Through a Wearable Egocentric Vision Device

    Directory of Open Access Journals (Sweden)

    Stefano Alletto

    2016-02-01

    Full Text Available Augmented user experiences in the cultural heritage domain are in increasing demand by the new digital native tourists of 21st century. In this paper, we propose a novel solution that aims at assisting the visitor during an outdoor tour of a cultural site using the unique first person perspective of wearable cameras. In particular, the approach exploits computer vision techniques to retrieve the details by proposing a robust descriptor based on the covariance of local features. Using a lightweight wearable board, the solution can localize the user with respect to the 3D point cloud of the historical landmark and provide him with information about the details at which he is currently looking. Experimental results validate the method both in terms of accuracy and computational effort. Furthermore, user evaluation based on real-world experiments shows that the proposal is deemed effective in enriching a cultural experience.

  19. Performance evaluation of contrast-detail in full field digital mammography systems using ideal (Hotelling) observer vs. conventional automated analysis of CDMAM images for quality control of contrast-detail characteristics.

    Science.gov (United States)

    Delakis, Ioannis; Wise, Robert; Morris, Lauren; Kulama, Eugenia

    2015-11-01

    The purpose of this work was to evaluate the contrast-detail performance of full field digital mammography (FFDM) systems using ideal (Hotelling) observer Signal-to-Noise Ratio (SNR) methodology and ascertain whether it can be considered an alternative to the conventional, automated analysis of CDMAM phantom images. Five FFDM units currently used in the national breast screening programme were evaluated, which differed with respect to age, detector, Automatic Exposure Control (AEC) and target/filter combination. Contrast-detail performance was analysed using CDMAM and ideal observer SNR methodology. The ideal observer SNR was calculated for input signal originating from gold discs of varying thicknesses and diameters, and then used to estimate the threshold gold thickness for each diameter as per CDMAM analysis. The variability of both methods and the dependence of CDMAM analysis on phantom manufacturing discrepancies also investigated. Results from both CDMAM and ideal observer methodologies were informative differentiators of FFDM systems' contrast-detail performance, displaying comparable patterns with respect to the FFDM systems' type and age. CDMAM results suggested higher threshold gold thickness values compared with the ideal observer methodology, especially for small-diameter details, which can be attributed to the behaviour of the CDMAM phantom used in this study. In addition, ideal observer methodology results showed lower variability than CDMAM results. The Ideal observer SNR methodology can provide a useful metric of the FFDM systems' contrast detail characteristics and could be considered a surrogate for conventional, automated analysis of CDMAM images. Copyright © 2015 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  20. The Effects of Seductive Details in an Inflatable Planetarium

    Science.gov (United States)

    Gillette, Sean

    Astronomy is becoming a forgotten science, which is evident by its relatively low enrollment figures compared to biology, chemistry, and physics. A portable inflatable planetarium brings relevance back to astronomy and offers support to students and educators by simulating realistic astronomical environments. This study sought to determine if learning is improved in an inflatable planetarium by adhering to the design principles of the cognitive theory of multimedia learning (CTML), specifically the coherence principle, in an authentic classroom. Two groups of 5th grade students of similar ability were purposefully assigned using a 1-teacher-to-many-students format with mean lesson lengths of 34 minutes. The experimental group was differentiated with seductive details, defined as interesting but irrelevant facts that can distract learning. The control group ( n = 28), with seductive details excluded, outperformed the experimental group (n = 28), validating the coherence principle and producing a Cohen's effect size of medium practical significance (d = 0.4). These findings suggest that CTML, when applied to planetarium instruction, does increase student learning and that seductive details do have a negative effect on learning. An adult training project was created to instruct educators on the benefits of CTML in astronomy education. This study leads to positive social change by highlighting astronomy education while providing educators with design principles of CTML in authentic settings to maximize learning, aid in the creation of digital media (astronomical simulations/instructional lessons for planetariums) and provide valuable training for owners of inflatable planetariums with the eventual goal of increasing student enrollment of astronomy courses at the local level.

  1. It's in the details: The role of selective discussion in forgetting of children's autobiographical memories.

    Science.gov (United States)

    Glynn, Ruth; Salmon, Karen; Low, Jason

    2018-03-01

    This experiment investigated whether retrieval-induced forgetting (RIF) would be found in children's self-generated autobiographical memory recall. An adapted version of the RIF paradigm for adults' autobiographical memories was administered to 8- and 9-year-old children (N = 65). We hypothesized that RIF would be found in terms of both number of memories recalled and amount of memory detail reported. The relationship between memory detail at the retrieval practice phase and RIF magnitude was also investigated. Consistent with hypotheses, RIF was found for both the number of memories recalled and the amount of memory detail reported. In addition, memory detail at retrieval practice was associated with increased RIF magnitude. Findings extend the current literature in three ways. First, they indicate that selective discussion of autobiographical events with children can cause forgetting of similar non-discussed events. Second, even when these non-discussed events are recalled, they contain sparser memory detail. Finally, when events are selectively discussed in greater detail, forgetting of similar non-discussed events occurs to a greater extent. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. Detail design of a 10.4-m stretched-membrane dish. Phase 2, Final report

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    This report describes efforts conducted under Tasks 3 and 4 of the second phase of the project to develop a single-element stretched-membrane dish concept to reduce the cost of a high-performance concentrating solar collector. We completed the detailed design for such a collector suitable to drive a 25-kWe Stirling motor generator. The design includes the collectors, optical element, the drive, and support systems. The aperture of the optical element was sized to provide the required energy to the engine based on test data and analytical models of the concentrator receiver, and engine. The design of the optical element was improved based on experience gained from the design, fabrication, and testing of several prototypes.

  3. Automated leak localization performance without detailed demand distribution data

    NARCIS (Netherlands)

    Moors, Janneke; Scholten, L.; van der Hoek, J.P.; den Besten, J.

    2018-01-01

    Automatic leak localization has been suggested to reduce the time and personnel efforts needed to localize
    (small) leaks. Yet, the available methods require a detailed demand distribution model for successful
    calibration and good leak localization performance. The main aim of this work was

  4. Detailed kinetic modeling study of n-pentanol oxidation

    KAUST Repository

    Heufer, Karl Alexander; Sarathy, Mani; Curran, Henry J.; Davis, Alexander C.; Westbrook, Charles K.; Pitz, William J.

    2012-01-01

    To help overcome the world's dependence upon fossil fuels, suitable biofuels are promising alternatives that can be used in the transportation sector. Recent research on internal combustion engines shows that short alcoholic fuels (e.g., ethanol or n-butanol) have reduced pollutant emissions and increased knock resistance compared to fossil fuels. Although higher molecular weight alcohols (e.g., n-pentanol and n-hexanol) exhibit higher reactivity that lowers their knock resistance, they are suitable for diesel engines or advanced engine concepts, such as homogeneous charge compression ignition (HCCI), where higher reactivity at lower temperatures is necessary for engine operation. The present study presents a detailed kinetic model for n-pentanol based on modeling rules previously presented for n-butanol. This approach was initially validated using quantum chemistry calculations to verify the most stable n-pentanol conformation and to obtain C-H and C-C bond dissociation energies. The proposed model has been validated against ignition delay time data, speciation data from a jet-stirred reactor, and laminar flame velocity measurements. Overall, the model shows good agreement with the experiments and permits a detailed discussion of the differences between alcohols and alkanes. © 2012 American Chemical Society.

  5. Detailed kinetic modeling study of n-pentanol oxidation

    KAUST Repository

    Heufer, Karl Alexander

    2012-10-18

    To help overcome the world\\'s dependence upon fossil fuels, suitable biofuels are promising alternatives that can be used in the transportation sector. Recent research on internal combustion engines shows that short alcoholic fuels (e.g., ethanol or n-butanol) have reduced pollutant emissions and increased knock resistance compared to fossil fuels. Although higher molecular weight alcohols (e.g., n-pentanol and n-hexanol) exhibit higher reactivity that lowers their knock resistance, they are suitable for diesel engines or advanced engine concepts, such as homogeneous charge compression ignition (HCCI), where higher reactivity at lower temperatures is necessary for engine operation. The present study presents a detailed kinetic model for n-pentanol based on modeling rules previously presented for n-butanol. This approach was initially validated using quantum chemistry calculations to verify the most stable n-pentanol conformation and to obtain C-H and C-C bond dissociation energies. The proposed model has been validated against ignition delay time data, speciation data from a jet-stirred reactor, and laminar flame velocity measurements. Overall, the model shows good agreement with the experiments and permits a detailed discussion of the differences between alcohols and alkanes. © 2012 American Chemical Society.

  6. External details revisited - A new taxonomy for coding 'non-episodic' content during autobiographical memory retrieval.

    Science.gov (United States)

    Strikwerda-Brown, Cherie; Mothakunnel, Annu; Hodges, John R; Piguet, Olivier; Irish, Muireann

    2018-04-24

    Autobiographical memory (ABM) is typically held to comprise episodic and semantic elements, with the vast majority of studies to date focusing on profiles of episodic details in health and disease. In this context, 'non-episodic' elements are often considered to reflect semantic processing or are discounted from analyses entirely. Mounting evidence suggests that rather than reflecting one unitary entity, semantic autobiographical information may contain discrete subcomponents, which vary in their relative degree of semantic or episodic content. This study aimed to (1) review the existing literature to formally characterize the variability in analysis of 'non-episodic' content (i.e., external details) on the Autobiographical Interview and (2) use these findings to create a theoretically grounded framework for coding external details. Our review exposed discrepancies in the reporting and interpretation of external details across studies, reinforcing the need for a new, consistent approach. We validated our new external details scoring protocol (the 'NExt' taxonomy) in patients with Alzheimer's disease (n = 18) and semantic dementia (n = 13), and 20 healthy older Control participants and compared profiles of the NExt subcategories across groups and time periods. Our results revealed increased sensitivity of the NExt taxonomy in discriminating between ABM profiles of patient groups, when compared to traditionally used internal and external detail metrics. Further, remote and recent autobiographical memories displayed distinct compositions of the NExt detail types. This study is the first to provide a fine-grained and comprehensive taxonomy to parse external details into intuitive subcategories and to validate this protocol in neurodegenerative disorders. © 2018 The British Psychological Society.

  7. A stereotaxic, population-averaged T1w ovine brain atlas including cerebral morphology and tissue volumes

    Directory of Open Access Journals (Sweden)

    Björn eNitzsche

    2015-06-01

    Full Text Available Standard stereotaxic reference systems play a key role in human brain studies. Stereotaxic coordinate systems have also been developed for experimental animals including non-human primates, dogs and rodents. However, they are lacking for other species being relevant in experimental neuroscience including sheep. Here, we present a spatial, unbiased ovine brain template with tissue probability maps (TPM that offer a detailed stereotaxic reference frame for anatomical features and localization of brain areas, thereby enabling inter-individual and cross-study comparability. Three-dimensional data sets from healthy adult Merino sheep (Ovis orientalis aries, 12 ewes and 26 neutered rams were acquired on a 1.5T Philips MRI using a T1w sequence. Data were averaged by linear and non-linear registration algorithms. Moreover, animals were subjected to detailed brain volume analysis including examinations with respect to body weight, age and sex. The created T1w brain template provides an appropriate population-averaged ovine brain anatomy in a spatial standard coordinate system. Additionally, TPM for gray (GM and white (WM matter as well as cerebrospinal fluid (CSF classification enabled automatic prior-based tissue segmentation using statistical parametric mapping (SPM. Overall, a positive correlation of GM volume and body weight explained about 15% of the variance of GM while a positive correlation between WM and age was found. Absolute tissue volume differences were not detected, indeed ewes showed significantly more GM per bodyweight as compared to neutered rams. The created framework including spatial brain template and TPM represent a useful tool for unbiased automatic image preprocessing and morphological characterization in sheep. Therefore, the reported results may serve as a starting point for further experimental and/or translational research aiming at in vivo analysis in this species.

  8. Should DSM-V include dimensional diagnostic criteria for alcohol use disorders?

    Science.gov (United States)

    Helzer, John E; Bucholz, Kathleen K; Bierut, Laura Jean; Regier, Darrel A; Schuckit, Marc A; Guth, Sarah E

    2006-02-01

    This program calls attention to the upcoming timetable for the revision of the Diagnostic and Statistical Manual (DSM)-IV and the publication of DSM-V. It is vitally important for Research Society of Alcoholism members to be aware of the current discussions of the important scientific questions related to the next DSM revision and to use the opportunity for input. The title of the symposium highlights 1 key question, i.e., whether the DSM definitions should remain strictly categorical as in the past or whether a dimensional component should be included in this revision. Two substantive and 1 conceptual paper are included in this portion of the symposium. The fourth and final presentation detailing the revision timetable and the opportunities for input is by Dr. Darrel Regier. Dr. Regier is the director of American Psychiatric Institute for Research and Education the research and education branch of the American Psychiatric Association and the organization within the APA that will oversee the DSM revision. The discussion is by Marc Schuckit, who was chair of the Substance Use disorders (SUD) Committee for DSM-IV and cochair of the international group of experts reviewing the SUD definitions for DSM-V.

  9. Detailed thermal-hydraulic computation into a containment building

    Energy Technology Data Exchange (ETDEWEB)

    Caruso. A.; Flour, I.; Simonin, O. [EDF/LNH, Chatou (France); Cherbonnel, C [EDF/SEPTEN, Villeurbanne (France)

    1995-09-01

    This paper deals with numerical predictions of the influence of water sprays upon stratifications into a containment building using a two-dimensional two-phase flow code. Basic equations and closure assumptions are briefly presented. A test case in a situation involving spray evaporation is first detailed to illustrate the validation step. Then results are presented for a compressible recirculating flow into a containment building with condensation phenomena.

  10. Factors Affecting Two Types of Memory Specificity: Particularization of Episodes and Details.

    Science.gov (United States)

    Willén, Rebecca M; Granhag, Pär Anders; Strömwall, Leif A

    2016-01-01

    Memory for repeated events is relevant to legal investigations about repeated occurrences. We investigated how two measures of specificity (number of events referred to and amount of detail reported about the events) were influenced by interviewees' age, number of experienced events, interviewer, perceived unpleasantness, and memory rehearsal. Transcribed narratives consisting of over 40.000 utterances from 95 dental patients, and the corresponding dental records, were studied. Amount of detail was measured by categorizing the utterances as generic, specific, or specific-extended. We found that the two measures were affected differently by all five factors. For instance, number of experienced events positively influenced number of referred events but had no effect on amount of detail provided about the events. We make suggestions for future research and encourage reanalysis of the present data set and reuse of the material.

  11. A detailed family history of myocardial infarction and risk of myocardial infarction

    DEFF Research Database (Denmark)

    Ranthe, Mattis Flyvholm; Petersen, Jonathan Aavang; Bundgård, Henning

    2015-01-01

    of cardiovascular medications. CONCLUSION: A detailed family history, particularly number of affected first- and second-degree relatives, contributes meaningfully to risk assessment, especially in middle-aged persons. Future studies should test for potential improvement of risk algorithm prediction using detailed......BACKGROUND: Family history of myocardial infarction (MI) is an independent risk factor for MI. Several genetic variants are associated with increased risk of MI and family history of MI in a first-degree relative doubles MI risk. However, although family history of MI is not a simple dichotomous...... risk factor, the impact of specific, detailed family histories has not received much attention, despite its high clinical relevance. We examined risk of MI by MIs in first- and second-degree relatives and by number and age of affected relatives. METHODS AND FINDINGS: Using Danish national registers, we...

  12. Factors Affecting Two Types of Memory Specificity: Particularization of Episodes and Details.

    Directory of Open Access Journals (Sweden)

    Rebecca M Willén

    Full Text Available Memory for repeated events is relevant to legal investigations about repeated occurrences. We investigated how two measures of specificity (number of events referred to and amount of detail reported about the events were influenced by interviewees' age, number of experienced events, interviewer, perceived unpleasantness, and memory rehearsal. Transcribed narratives consisting of over 40.000 utterances from 95 dental patients, and the corresponding dental records, were studied. Amount of detail was measured by categorizing the utterances as generic, specific, or specific-extended. We found that the two measures were affected differently by all five factors. For instance, number of experienced events positively influenced number of referred events but had no effect on amount of detail provided about the events. We make suggestions for future research and encourage reanalysis of the present data set and reuse of the material.

  13. Detailed Balance of Thermalization Dynamics in Rydberg-Atom Quantum Simulators.

    Science.gov (United States)

    Kim, Hyosub; Park, YeJe; Kim, Kyungtae; Sim, H-S; Ahn, Jaewook

    2018-05-04

    Dynamics of large complex systems, such as relaxation towards equilibrium in classical statistical mechanics, often obeys a master equation that captures essential information from the complexities. Here, we find that thermalization of an isolated many-body quantum state can be described by a master equation. We observe sudden quench dynamics of quantum Ising-like models implemented in our quantum simulator, defect-free single-atom tweezers in conjunction with Rydberg-atom interaction. Saturation of their local observables, a thermalization signature, obeys a master equation experimentally constructed by monitoring the occupation probabilities of prequench states and imposing the principle of the detailed balance. Our experiment agrees with theories and demonstrates the detailed balance in a thermalization dynamics that does not require coupling to baths or postulated randomness.

  14. Detailed Balance of Thermalization Dynamics in Rydberg-Atom Quantum Simulators

    Science.gov (United States)

    Kim, Hyosub; Park, YeJe; Kim, Kyungtae; Sim, H.-S.; Ahn, Jaewook

    2018-05-01

    Dynamics of large complex systems, such as relaxation towards equilibrium in classical statistical mechanics, often obeys a master equation that captures essential information from the complexities. Here, we find that thermalization of an isolated many-body quantum state can be described by a master equation. We observe sudden quench dynamics of quantum Ising-like models implemented in our quantum simulator, defect-free single-atom tweezers in conjunction with Rydberg-atom interaction. Saturation of their local observables, a thermalization signature, obeys a master equation experimentally constructed by monitoring the occupation probabilities of prequench states and imposing the principle of the detailed balance. Our experiment agrees with theories and demonstrates the detailed balance in a thermalization dynamics that does not require coupling to baths or postulated randomness.

  15. Victory Has a Thousand Fathers: Detailed Counterinsurgency Case Studies

    Science.gov (United States)

    2010-01-01

    Fathers: Detailed Counterinsurgency Case Studies There was more progress toward a peace agreement in 1999 when Nelson Mandela was designated as...mediator for the conflict. While Mandela still failed to bring the rebel groups to the table, he was able to negotiate an agreement among the political

  16. Routing the asteroid surface vehicle with detailed mechanics

    Science.gov (United States)

    Yu, Yang; Baoyin, He-Xi

    2014-06-01

    The motion of a surface vehicle on/above an irregular object is investigated for a potential interest in the insitu explorations to asteroids of the solar system. A global valid numeric method, including detailed gravity and geomorphology, is developed to mimic the behaviors of the test particles governed by the orbital equations and surface coupling effects. A general discussion on the surface mechanical environment of a specified asteroid, 1620 Geographos, is presented to make a global evaluation of the surface vehicle's working conditions. We show the connections between the natural trajectories near the ground and differential features of the asteroid surface, which describes both the good and bad of typical terrains from the viewpoint of vehicles' dynamic performances. Monte Carlo simulations are performed to take a further look at the trajectories of particles initializing near the surface. The simulations reveal consistent conclusions with the analysis, i.e., the open-field flat ground and slightly concave basins/valleys are the best choices for the vehicles' dynamical security. The dependence of decending trajectories on the releasing height is studied as an application; the results show that the pole direction (where the centrifugal force is zero) is the most stable direction in which the shift of a natural trajectory will be well limited after landing. We present this work as an example for pre-analysis that provides guidance to engineering design of the exploration site and routing the surface vehicles.

  17. ESTABLISHMENT OF DETAILED EYE MODEL OF ADULT CHINESE MALE AND DOSE CONVERSION COEFFICIENTS CALCULATION UNDER NEUTRON EXPOSURE.

    Science.gov (United States)

    Zhu, Hongyu; Qiu, Rui; Wu, Zhen; Ren, Li; Li, Chunyan; Zhang, Hui; Li, Junli

    2017-12-01

    The human eye lens is sensitive to radiation. ICRP-118 publication recommended a reduction of the occupational annual equivalent dose limit from 150 to 20 mSv, averaged over defined periods of 5 y. Therefore, it is very important to build a detailed eye model for the accurate dose assessment and radiation risk evaluation of eye lens. In this work, a detailed eye model was build based on the characteristic anatomic parameters of the Chinese adult male. This eye model includes seven main structures, which are scleral, choroid, lens, iris, cornea, vitreous body and aqueous humor. The lens was divided into sensitive volume and insensitive volume based on different cell populations. The detailed eye model was incorporated into the converted polygon-mesh version of the Chinese reference adult male whole-body surface model. After the incorporation, dose conversion coefficients for the eye lens were calculated for neutron exposure at AP, PA and LAT geometries with Geant4, the neutron energies were from 0.001 eV to 10 MeV. The calculated lens dose coefficients were compared with those of ICRP-116 publication. Significant differences up to 97.47% were found at PA geometry. This could mainly be attributed to the different geometry characteristic of eye model and parameters of head in different phantom between the present work and ICRP-116 publication. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  18. Major models and data sources for residential and commercial sector energy conservation analysis. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    Major models and data sources are reviewed that can be used for energy-conservation analysis in the residential and commercial sectors to provide an introduction to the information that can or is available to DOE in order to further its efforts in analyzing and quantifying their policy and program requirements. Models and data sources examined in the residential sector are: ORNL Residential Energy Model; BECOM; NEPOOL; MATH/CHRDS; NIECS; Energy Consumption Data Base: Household Sector; Patterns of Energy Use by Electrical Appliances Data Base; Annual Housing Survey; 1970 Census of Housing; AIA Research Corporation Data Base; RECS; Solar Market Development Model; and ORNL Buildings Energy Use Data Book. Models and data sources examined in the commercial sector are: ORNL Commercial Sector Model of Energy Demand; BECOM; NEPOOL; Energy Consumption Data Base: Commercial Sector; F.W. Dodge Data Base; NFIB Energy Report for Small Businesses; ADL Commercial Sector Energy Use Data Base; AIA Research Corporation Data Base; Nonresidential Buildings Surveys of Energy Consumption; General Electric Co: Commercial Sector Data Base; The BOMA Commercial Sector Data Base; The Tishman-Syska and Hennessy Data Base; The NEMA Commercial Sector Data Base; ORNL Buildings Energy Use Data Book; and Solar Market Development Model. Purpose; basis for model structure; policy variables and parameters; level of regional, sectoral, and fuels detail; outputs; input requirements; sources of data; computer accessibility and requirements; and a bibliography are provided for each model and data source.

  19. Mass spectrometry in identification of ecotoxicants including chemical and biological warfare agents

    International Nuclear Information System (INIS)

    Lebedev, Albert T.

    2005-01-01

    Mass spectrometry is a unique tool to detect and identify trace levels of organic and bioorganic compounds as well as microorganisms in the environment. The range of potential chemical warfare (CW) and biological warfare (BW) agents is very broad. An important advantage of mass spectrometry over other techniques involves potential for full spectrum detection of chemical and biological agents including mid-spectrum materials (i.e. bioactive peptides, toxins, etc.) for which biological approaches are inadequate. Being very fast (seconds and minutes), extremely sensitive (zeptomoles 10 -21 ), and informative (detailed qualitative and quantitative composition of mixtures containing hundreds of chemicals), mass spectrometry is a principal analytical tool at the sites of destruction of CW. Due to its unique features, mass spectrometry is applied not only for the detection of CW agents, but for the analysis of products of metabolism and degradation of these agents in organisms or environment as well. The present paper deals with some examples of successful application of mass spectrometry for the analyses of ecotoxicants, chemical warfare agents, explosives, and microorganisms including biology warfare agents

  20. Visual Overview, Oral Detail: The Use of an Emergency-Department Whiteboard

    DEFF Research Database (Denmark)

    Hertzum, Morten; Simonsen, Jesper

    2015-01-01

    and with the coordinating nurse, who is the main keeper of the whiteboard. On the basis of observations, we find that coordination is accomplished through a highly intertwined process of technologically mediated visual overview combined with orally communicated details. The oral details serve to clarify and elaborate......Whiteboards facilitate coordinative practices by making information publicly accessible and thereby strengthening communication and joint commitment about it. This study investigates how coordination is accomplished in an emergency department through interactions with the whiteboard...... instrumental and communicative coordination are central to the coordinative function of the whiteboard. We discuss this and other implications for design....

  1. Patient-specific estimation of detailed cochlear shape from clinical CT images

    DEFF Research Database (Denmark)

    Kjer, H Martin; Fagertun, Jens; Wimmer, Wilhelm

    2018-01-01

    of the detailed patient-specific cochlear shape from CT images. From a collection of temporal bone [Formula: see text]CT images, we build a cochlear statistical deformation model (SDM), which is a description of how a human cochlea deforms to represent the observed anatomical variability. The model is used...... for regularization of a non-rigid image registration procedure between a patient CT scan and a [Formula: see text]CT image, allowing us to estimate the detailed patient-specific cochlear shape. We test the accuracy and precision of the predicted cochlear shape using both [Formula: see text]CT and CT images...

  2. KNOW YOUR NEIGHBORHOOD: A DETAILED MODEL ATMOSPHERE ANALYSIS OF NEARBY WHITE DWARFS

    Energy Technology Data Exchange (ETDEWEB)

    Giammichele, N.; Bergeron, P. [Kitt Peak National Observatory, National Optical Astronomy Observatory, which is operated by the Association of Universities for Research in Astronomy (AURA) under cooperative agreement with the National Science Foundation (United States); Dufour, P., E-mail: noemi.giammichele@astro.umontreal.ca, E-mail: pierre.bergeron@astro.umontreal.ca, E-mail: patrick.dufour@astro.umontreal.ca [Departement de Physique, Universite de Montreal, C.P. 6128, Succ. Centre-Ville, Montreal, Quebec H3C 3J7 (Canada)

    2012-04-01

    We present improved atmospheric parameters of nearby white dwarfs lying within 20 pc of the Sun. The aim of the current study is to obtain the best statistical model of the least-biased sample of the white dwarf population. A homogeneous analysis of the local population is performed combining detailed spectroscopic and photometric analyses based on improved model atmosphere calculations for various spectral types including DA, DB, DC, DQ, and DZ stars. The spectroscopic technique is applied to all stars in our sample for which optical spectra are available. Photometric energy distributions, when available, are also combined to trigonometric parallax measurements to derive effective temperatures, stellar radii, as well as atmospheric compositions. A revised catalog of white dwarfs in the solar neighborhood is presented. We provide, for the first time, a comprehensive analysis of the mass distribution and the chemical distribution of white dwarf stars in a volume-limited sample.

  3. Exact multiple scattering theory of two-nucleus collisions including the Pauli principle

    International Nuclear Information System (INIS)

    Gurvitz, S.A.

    1981-01-01

    Exact equations for two-nucleus scattering are derived in which the effects of the Pauli principle are fully included. Our method exploits a modified equation for the scattering of two identical nucleons, which is obtained at the beginning. Considering proton-nucleus scattering we found that the resulting amplitude has two components, one resembling a multiple scattering series for distinguishable particles, and the other a distorted (A-1) nucleon cluster exchange. For elastic pA scattering the multiple scattering amplitude is found in the form of an optical potential expansion. We show that the Kerman-McManus-Thaler theory of the optical potential could be easily modified to include the effects of antisymmetrization of the projectile with the target nucleons. Nucleus-nucleus scattering is studied first for distinguishable target and beam nucleus. Afterwards the Pauli principle is included, where only the case of deuteron-nucleus scattering is discussed in detail. The resulting amplitude has four components. Two of them correspond to modified multiple scattering expansions and the others are distorted (A-1)- and (A-2)- nucleon cluster exchange. The result for d-A scattering is extended to the general case of nucleus-nucleus scattering. The equations are simple to use and as such constitute an improvement over existing schemes

  4. Detailed Comparisons of COMBAT Data to Wave-Optics Simulations

    Science.gov (United States)

    2015-10-18

    is currently available. On the other hand, detailed simulation of the transmitter, atmosphere, and receiver can improve agreement and predictive...over 144 km in a Canary Islands experiment,” Appl. Opt. 51, 7374–7383, 2012. 8. R. J. Hill and S. F. Clifford. “Modified spectrum of atmospheric

  5. International Atomic Energy Agency. Publications Catalogue 2012-2013 - full details of publications published 2011-2013, forthcoming publications and a stocklist of publications published 2009-2012

    International Nuclear Information System (INIS)

    2012-07-01

    The IAEA is one of the leading publishers in the field of nuclear science and technology, with titles on nuclear and radiological safety, emergency response, nuclear power, nuclear medicine, nuclear waste management, nuclear law and safeguards as well as relevant topics in food and agriculture, earth sciences, industry and the environment. Key publications include the IAEA Safety Standards, which detail the principles of safety for protection against ionizing radiation, and IAEA Safety Reports, which describe good practices and give practical examples and detailed methods that can be used to meet safety requirements.

  6. "When does making detailed predictions make predictions worse?": Correction to Kelly and Simmons (2016).

    Science.gov (United States)

    2016-10-01

    Reports an error in "When Does Making Detailed Predictions Make Predictions Worse" by Theresa F. Kelly and Joseph P. Simmons ( Journal of Experimental Psychology: General , Advanced Online Publication, Aug 8, 2016, np). In the article, the symbols in Figure 2 were inadvertently altered in production. All versions of this article have been corrected. (The following abstract of the original article appeared in record 2016-37952-001.) In this article, we investigate whether making detailed predictions about an event worsens other predictions of the event. Across 19 experiments, 10,896 participants, and 407,045 predictions about 724 professional sports games, we find that people who made detailed predictions about sporting events (e.g., how many hits each baseball team would get) made worse predictions about more general outcomes (e.g., which team would win). We rule out that this effect is caused by inattention or fatigue, thinking too hard, or a differential reliance on holistic information about the teams. Instead, we find that thinking about game-relevant details before predicting winning teams causes people to give less weight to predictive information, presumably because predicting details makes useless or redundant information more accessible and thus more likely to be incorporated into forecasts. Furthermore, we show that this differential use of information can be used to predict what kinds of events will and will not be susceptible to the negative effect of making detailed predictions. PsycINFO Database Record (c) 2016 APA, all rights reserved

  7. CMHC [Canadian Mortgage and Housing Corporation] research project: Testing of air barriers construction details

    Energy Technology Data Exchange (ETDEWEB)

    1991-08-26

    The airtightness of building envelopes is important in controlling comfort and energy usage in houses. Leakage generally occurs through construction details, where there are joints or connections between materials, or where there are penetrations for services or other components. A study was conducted to quantify the air leakage characteristics of three such details in wood-frame walls: the header joist, the electric outlets, and the window opening detail. Three construction methods employed to achieve airtightness were evaluated: the sealed internal membrane approach (POLY); the external air barrier approach using a continuous vapour permeable membrane sandwiched between two layers of wall sheathing(EASE); and the airtight drywall approach (ADA). Test panels containing the details were subjected to air leakage testing at pressure differentials from 50 to 1,000 pascals. Measurements of air flow were made and evidence of failure of the barrier due to pressure loading was noted. Leakage rates for the header detail with the POLY, EASE and ADA panels were 24%, 18% and 10% respectively of that for the reference panel. For the electrical outlet joint, leakage rates for POLY and EASE panels were 24% and 36%, while the ADA panel had higher leakage rates than the traditional panel. For the window detail, leakage rates were lowest for the ADA panel and similar for the POLY and EASE panels; all were less than 15% that of traditional panels. 48 figs., 2 tabs.

  8. Cost model relationships between textile manufacturing processes and design details for transport fuselage elements

    Science.gov (United States)

    Metschan, Stephen L.; Wilden, Kurtis S.; Sharpless, Garrett C.; Andelman, Rich M.

    1993-01-01

    Textile manufacturing processes offer potential cost and weight advantages over traditional composite materials and processes for transport fuselage elements. In the current study, design cost modeling relationships between textile processes and element design details were developed. Such relationships are expected to help future aircraft designers to make timely decisions on the effect of design details and overall configurations on textile fabrication costs. The fundamental advantage of a design cost model is to insure that the element design is cost effective for the intended process. Trade studies on the effects of processing parameters also help to optimize the manufacturing steps for a particular structural element. Two methods of analyzing design detail/process cost relationships developed for the design cost model were pursued in the current study. The first makes use of existing databases and alternative cost modeling methods (e.g. detailed estimating). The second compares design cost model predictions with data collected during the fabrication of seven foot circumferential frames for ATCAS crown test panels. The process used in this case involves 2D dry braiding and resin transfer molding of curved 'J' cross section frame members having design details characteristic of the baseline ATCAS crown design.

  9. “Influence Method”. Detailed mathematical description

    International Nuclear Information System (INIS)

    Rios, I.J.; Mayer, R.E.

    2015-01-01

    A new method for the absolute determination of nuclear particle flux in the absence of known detector efficiency, the “Influence Method”, was recently published (I.J. Rios and R.E. Mayer, Nuclear Instruments & Methods in Physics Research A 775 (2015) 99–104). The method defines an estimator for the population and another estimator for the efficiency. In this article we present a detailed mathematical description which yields the conditions for its application, the probability distributions of the estimators and their characteristic parameters. An analysis of the different cases leads to expressions of the estimators and their uncertainties. - Highlights: • “Influence Method”, a new method for absolute particle flux determination. • Absolute counting method when detector efficiencies are not known. • Absolute detector efficiency determination

  10. Breast cancer screening activity in the Mie medical network, with special reference to the actual circumstances of detailed examination

    International Nuclear Information System (INIS)

    Nakai, Masahiro; Kawaguchi, Kanako; Kobayashi, Shigeki

    2009-01-01

    For clarifying both the current circumstances and problems of closed examination performed at facilities equipped for detailed examination in Mie Prefecture, we analyzed the results of closed examinations carried out on 1,001 responders who were selected by primary mammography screening done at 87 facilities in 2006. The overall breast cancer detection rate was 3.3%, with a range of 0-10.3%, for facilities that included family doctors, and 13 hospitals having performed the closed examination on 21 women or more. Although the location of a facility for closed examination and the background of examinees might be taken into consideration, it appeared that a higher cancer detection rate was obtained when more pathological examinations were carried out, and that the indications for pathological examination varied among physicians. At facilities where pathological examinations were frequently performed, mostly clinicians specializing in breast cancer performed either fine-needle aspiration biopsy or large-needle biopsy (a specific aspiration biopsy technique for calcified lesions), whereas at facilities with low rates of pathological examination, most surgeons not specializing in breast cancer performed open biopsy. These results suggest a need to draw up guidelines for detailed examination, including the standard of facilities for closed examination, clinicians who perform the examinations, and the examination methods. (author)

  11. Energy Return on Investment (EROI) for Forty Global Oilfields Using a Detailed Engineering-Based Model of Oil Production

    Science.gov (United States)

    Brandt, Adam R.; Sun, Yuchi; Bharadwaj, Sharad; Livingston, David; Tan, Eugene; Gordon, Deborah

    2015-01-01

    Studies of the energy return on investment (EROI) for oil production generally rely on aggregated statistics for large regions or countries. In order to better understand the drivers of the energy productivity of oil production, we use a novel approach that applies a detailed field-level engineering model of oil and gas production to estimate energy requirements of drilling, producing, processing, and transporting crude oil. We examine 40 global oilfields, utilizing detailed data for each field from hundreds of technical and scientific data sources. Resulting net energy return (NER) ratios for studied oil fields range from ≈2 to ≈100 MJ crude oil produced per MJ of total fuels consumed. External energy return (EER) ratios, which compare energy produced to energy consumed from external sources, exceed 1000:1 for fields that are largely self-sufficient. The lowest energy returns are found to come from thermally-enhanced oil recovery technologies. Results are generally insensitive to reasonable ranges of assumptions explored in sensitivity analysis. Fields with very large associated gas production are sensitive to assumptions about surface fluids processing due to the shifts in energy consumed under different gas treatment configurations. This model does not currently include energy invested in building oilfield capital equipment (e.g., drilling rigs), nor does it include other indirect energy uses such as labor or services. PMID:26695068

  12. Energy Return on Investment (EROI for Forty Global Oilfields Using a Detailed Engineering-Based Model of Oil Production.

    Directory of Open Access Journals (Sweden)

    Adam R Brandt

    Full Text Available Studies of the energy return on investment (EROI for oil production generally rely on aggregated statistics for large regions or countries. In order to better understand the drivers of the energy productivity of oil production, we use a novel approach that applies a detailed field-level engineering model of oil and gas production to estimate energy requirements of drilling, producing, processing, and transporting crude oil. We examine 40 global oilfields, utilizing detailed data for each field from hundreds of technical and scientific data sources. Resulting net energy return (NER ratios for studied oil fields range from ≈2 to ≈100 MJ crude oil produced per MJ of total fuels consumed. External energy return (EER ratios, which compare energy produced to energy consumed from external sources, exceed 1000:1 for fields that are largely self-sufficient. The lowest energy returns are found to come from thermally-enhanced oil recovery technologies. Results are generally insensitive to reasonable ranges of assumptions explored in sensitivity analysis. Fields with very large associated gas production are sensitive to assumptions about surface fluids processing due to the shifts in energy consumed under different gas treatment configurations. This model does not currently include energy invested in building oilfield capital equipment (e.g., drilling rigs, nor does it include other indirect energy uses such as labor or services.

  13. Two-fluid electromagnetic simulations of plasma-jet acceleration with detailed equation-of-state

    International Nuclear Information System (INIS)

    Thoma, C.; Welch, D. R.; Clark, R. E.; Bruner, N.; MacFarlane, J. J.; Golovkin, I. E.

    2011-01-01

    We describe a new particle-based two-fluid fully electromagnetic algorithm suitable for modeling high density (n i ∼ 10 17 cm -3 ) and high Mach number laboratory plasma jets. In this parameter regime, traditional particle-in-cell (PIC) techniques are challenging due to electron timescale and lengthscale constraints. In this new approach, an implicit field solve allows the use of large timesteps while an Eulerian particle remap procedure allows simulations to be run with very few particles per cell. Hall physics and charge separation effects are included self-consistently. A detailed equation of state (EOS) model is used to evolve the ion charge state and introduce non-ideal gas behavior. Electron cooling due to radiation emission is included in the model as well. We demonstrate the use of these new algorithms in 1D and 2D Cartesian simulations of railgun (parallel plate) jet accelerators using He and Ar gases. The inclusion of EOS and radiation physics reduces the electron temperature, resulting in higher calculated jet Mach numbers in the simulations. We also introduce a surface physics model for jet accelerators in which a frictional drag along the walls leads to axial spreading of the emerging jet. The simulations demonstrate that high Mach number jets can be produced by railgun accelerators for a variety of applications, including high energy density physics experiments.

  14. Two-fluid electromagnetic simulations of plasma-jet acceleration with detailed equation-of-state

    Energy Technology Data Exchange (ETDEWEB)

    Thoma, C.; Welch, D. R.; Clark, R. E.; Bruner, N. [Voss Scientific, LLC, Albuquerque, New Mexico 87108 (United States); MacFarlane, J. J.; Golovkin, I. E. [Prism Computational Sciences, Inc., Madison, Wisconsin 53711 (United States)

    2011-10-15

    We describe a new particle-based two-fluid fully electromagnetic algorithm suitable for modeling high density (n{sub i} {approx} 10{sup 17} cm{sup -3}) and high Mach number laboratory plasma jets. In this parameter regime, traditional particle-in-cell (PIC) techniques are challenging due to electron timescale and lengthscale constraints. In this new approach, an implicit field solve allows the use of large timesteps while an Eulerian particle remap procedure allows simulations to be run with very few particles per cell. Hall physics and charge separation effects are included self-consistently. A detailed equation of state (EOS) model is used to evolve the ion charge state and introduce non-ideal gas behavior. Electron cooling due to radiation emission is included in the model as well. We demonstrate the use of these new algorithms in 1D and 2D Cartesian simulations of railgun (parallel plate) jet accelerators using He and Ar gases. The inclusion of EOS and radiation physics reduces the electron temperature, resulting in higher calculated jet Mach numbers in the simulations. We also introduce a surface physics model for jet accelerators in which a frictional drag along the walls leads to axial spreading of the emerging jet. The simulations demonstrate that high Mach number jets can be produced by railgun accelerators for a variety of applications, including high energy density physics experiments.

  15. [[The Devil in the Details: Women's Right to Abortion and Health Organization].

    Science.gov (United States)

    Pioggia, Alessandra

    Often a woman's right to terminate a pregnancy for health reasons is considered as achieved by simply performing the intervention. But today isn't in doubt that the effective protection of health requires that health organizations carrying out performance which also affect other aspects: taking charge of women, information on services, respect for the dignity and autonomy of women, etc ... You could say that these are details, compared to the final performance. But, as we know, often the devil is in the details.

  16. Save Energy Now Assessments Results 2008 Detailed Report

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Anthony L [ORNL; Martin, Michaela A [ORNL; Nimbalkar, Sachin U [ORNL; Quinn, James [U.S. Department of Energy; Glatt, Ms. Sandy [DOE Industrial Technologies Program; Orthwein, Mr. Bill [U.S. Department of Energy

    2010-09-01

    independently replicate the assessment process at the company's other facilities. Another important element of the Save Energy Now assessment process is the follow-up process used to identify how many of the recommended savings opportunities from individual assessments have been implemented in the industrial plants. Plant personnel involved with the Save Energy Now assessments are contacted 6 months, 12 months, and 24 months after individual assessments are completed to determine implementation results. A total of 260 Save Energy Now assessments were successfully completed in calendar year 2008. This means that a total of 718 assessments were completed in 2006, 2007, and 2008. As of July 2009, we have received a total of 239 summary reports from the ESAs that were conducted in year 2008. Hence, at the time that this report was prepared, 680 final assessment reports were completed (200 from year 2006, 241 from year 2007, and 239 from year 2008). The total identified potential cost savings from these 680 assessments is $1.1 billion per year, including natural gas savings of about 98 TBtu per year. These results, if fully implemented, could reduce CO{sub 2} emissions by about 8.9 million metric tons annually. When this report was prepared, data on implementation of recommended energy and cost savings measures from 488 Save Energy Now assessments were available. For these 488 plants, measures saving a total of $147 million per year have been implemented, measures that will save $169 million per year are in the process of being implemented, and plants are planning implementation of measures that will save another $239 million per year. The implemented recommendations are already achieving total CO{sub 2} reductions of about 1.8 million metric tons per year. This report provides a summary of the key results for the Save Energy Now assessments completed in 2008; details of the 6-month, 12-month, and 24-month implementation results obtained to date; and an evaluation of these

  17. Detailed examination of the lower cervical spine facet joints in a road traffic crash fatality - a case study

    DEFF Research Database (Denmark)

    Uhrenholt, Lars; Nielsen, Edith; Vesterby, Annie

    2005-01-01

    The lower cervical spine facet joints of a road traffic crash fatality were examined using diagnostic imaging and histological techniques. No injuries to the cervical spine facet joints could be identified with diagnostic imaging including conventional radiology, CT and MRI. Examination of stained...... histological sections visualised the morphology and integrity of the facet joints in detail. Occult injuries to and in close proximity of the cervical spine facet joints were identified only on histological examination....

  18. Ocean Observing at Axial Seamount: Details of the Current OOI-RSN Design Within the Context of the April 2011 Eruption

    Science.gov (United States)

    Proskurowski, G.; Kelley, D. S.; Fundis, A. T.; Kawka, O.; Denny, G. F.; Delaney, J. R.

    2011-12-01

    In 2013, the NSF's Ocean Observatories Initiative (OOI) will deploy 22 instrument suites within the caldera of Axial Seamount as part of the cabled observatory component implemented by the Regional Scale Nodes (RSN) at the University of Washington. The cabled infrastructure will initially provide Axial caldera with a total of 8kW of power and 11Gbps of data bandwidth. Only an approximate 20% fraction will be used by "core instrumentation"-instrumentation supported and maintained by OOI-RSN. Thus, the OOI provided infrastructure is highly, and readily, expandable to include community-generated instrumention once the system is commissioned and begins operations in early 2015. Here we present the details of the current design of the cabled observatory at Axial Seamount, including locations of instruments, data products, and sampling rates placed in the context of meter scale resolution bathymetry and down-looking photomosaics of the experimental sites. The April 2011 Axial eruption is a demonstration of the importance of transmitting seismic, video, and vent fluid chemistry information in real-time. The eruptive event, or series of events, in April 2011 went undetected until a series of ROV/AUV cruises, planned separately and years in advance, made observations to discover, confirm, and detail the transformation to Axial (see Chadwick et al., this session). What transpired during, and shortly after, the eruption will remain largely unknown, as the initial extraordinary fluxes of heat, chemistry and biology will have decayed in the intervening three and a half months. Here we detail the response capabilities of the OOI-RSN cabled observatory to a future eruptive event under two scenarios-as built, and an expanded version using existing technology.

  19. Vadose zone transport field study: Detailed test plan for simulated leak tests

    International Nuclear Information System (INIS)

    AL Ward; GW Gee

    2000-01-01

    The US Department of Energy (DOE) Groundwater/Vadose Zone Integration Project Science and Technology initiative was created in FY 1999 to reduce the uncertainty associated with vadose zone transport processes beneath waste sites at DOE's Hanford Site near Richland, Washington. This information is needed not only to evaluate the risks from transport, but also to support the adoption of measures for minimizing impacts to the groundwater and surrounding environment. The principal uncertainties in vadose zone transport are the current distribution of source contaminants and the natural heterogeneity of the soil in which the contaminants reside. Oversimplified conceptual models resulting from these uncertainties and limited use of hydrologic characterization and monitoring technologies have hampered the understanding contaminant migration through Hanford's vadose zone. Essential prerequisites for reducing vadose transport uncertainly include the development of accurate conceptual models and the development or adoption of monitoring techniques capable of delineating the current distributions of source contaminants and characterizing natural site heterogeneity. The Vadose Zone Transport Field Study (VZTFS) was conceived as part of the initiative to address the major uncertainties confronting vadose zone fate and transport predictions at the Hanford Site and to overcome the limitations of previous characterization attempts. Pacific Northwest National Laboratory (PNNL) is managing the VZTFS for DOE. The VZTFS will conduct field investigations that will improve the understanding of field-scale transport and lead to the development or identification of efficient and cost-effective characterization methods. Ideally, these methods will capture the extent of contaminant plumes using existing infrastructure (i.e., more than 1,300 steel-cased boreholes). The objectives of the VZTFS are to conduct controlled transport experiments at well-instrumented field sites at Hanford to

  20. Global stability for infectious disease models that include immigration of infected individuals and delay in the incidence

    Directory of Open Access Journals (Sweden)

    Chelsea Uggenti

    2018-03-01

    Full Text Available We begin with a detailed study of a delayed SI model of disease transmission with immigration into both classes. The incidence function allows for a nonlinear dependence on the infected population, including mass action and saturating incidence as special cases. Due to the immigration of infectives, there is no disease-free equilibrium and hence no basic reproduction number. We show there is a unique endemic equilibrium and that this equilibrium is globally asymptotically stable for all parameter values. The results include vector-style delay and latency-style delay. Next, we show that previous global stability results for an SEI model and an SVI model that include immigration of infectives and non-linear incidence but not delay can be extended to systems with vector-style delay and latency-style delay.

  1. Analysis of exergy loss of gasoline surrogate combustion process based on detailed chemical kinetics

    International Nuclear Information System (INIS)

    Sun, Hongjie; Yan, Feng; Yu, Hao; Su, W.H.

    2015-01-01

    Highlights: • We explored the exergy loss sources of gasoline engine like combustion process. • The model combined non-equilibrium thermodynamics with detailed chemical kinetics. • We explored effects of initial conditions on exergy loss of combustion process. • Exergy loss decreases 15% of fuel chemical exergy by design of initial conditions. • Correspondingly, the second law efficiency increases from 38.9% to 68.9%. - Abstract: Chemical reaction is the most important source of combustion irreversibility in premixed conditions, but details of the exergy loss mechanisms have not been explored yet. In this study numerical analysis based on non-equilibrium thermodynamics combined with detailed chemical kinetics is conducted to explore the exergy loss mechanism of gasoline engine like combustion process which is simplified as constant volume combustion. The fuel is represented by the common accepted gasoline surrogates which consist of four components: iso-octane (57%), n-heptane (16%), toluene (23%), and 2-pentene (4%). We find that overall exergy loss is mainly composed of three peaks along combustion generated from chemical reactions in three stages, the conversion from large fuel molecules into small molecules (as Stage 1), the H 2 O 2 loop-related reactions (as Stage 2), and the violent oxidation reactions of CO, H, and O (as Stage 3). The effects of individual combustion boundaries, including temperature, pressure, equivalence ratio, oxygen concentration, on combustion exergy loss have been widely investigated. The combined effects of combustion boundaries on the total loss of gasoline surrogates are also investigated. We find that in a gasoline engine with a compression ratio of 10, the total loss can be reduced from 31.3% to 24.3% using lean combustion. The total loss can be further reduced to 22.4% by introducing exhaust gas recirculation and boosting the inlet charge. If the compression ratio is increased to 17, the total loss can be decreased to

  2. Academic detailing to teach aging and geriatrics.

    Science.gov (United States)

    Duckett, Ashley; Cuoco, Theresa; Pride, Pamela; Wiley, Kathy; Iverson, Patty J; Marsden, Justin; Moran, William; Caton, Cathryn

    2015-01-01

    Geriatric education is a required component of internal medicine training. Work hour rules and hectic schedules have challenged residency training programs to develop and utilize innovative teaching methods. In this study, the authors examined the use of academic detailing as a teaching intervention in their residents' clinic and on the general medicine inpatient wards to improve clinical knowledge and skills in geriatric care. The authors found that this teaching method enables efficient, directed education without disrupting patient care. We were able to show improvements in medical knowledge as well as self-efficacy across multiple geriatric topics.

  3. Analytical calculation of detailed model parameters of cast resin dry-type transformers

    International Nuclear Information System (INIS)

    Eslamian, M.; Vahidi, B.; Hosseinian, S.H.

    2011-01-01

    Highlights: → In this paper high frequency behavior of cast resin dry-type transformers was simulated. → Parameters of detailed model were calculated using analytical method and compared with FEM results. → A lab transformer was constructed in order to compare theoretical and experimental results. -- Abstract: Non-flammable characteristic of cast resin dry-type transformers make them suitable for different kind of usages. This paper presents an analytical method of how to obtain parameters of detailed model of these transformers. The calculated parameters are compared and verified with the corresponding FEM results and if it was necessary, correction factors are introduced for modification of the analytical solutions. Transient voltages under full and chopped test impulses are calculated using the obtained detailed model. In order to validate the model, a setup was constructed for testing on high-voltage winding of cast resin dry-type transformer. The simulation results were compared with the experimental data measured from FRA and impulse tests.

  4. Determination of detailed standards for transportation of radioactive materials by ships

    International Nuclear Information System (INIS)

    1978-01-01

    These provisions are established on the basis of the ''Regulations on the transport and storage of dangerous things by ships''. The terms used hereinafter are according to those used in the Regulations. Radioactive materials, etc., include uranium 233, uranium 235, plutonium 238, plutonium 239, plutonium 241, the compounds of such materials and the substances containing one or two and more of such materials, excluding such materials of not more than 15 grams. The permissible surface density of radioactive materials is 1/100,000 of one microcurie per cm 2 for the radioactive materials emitting alpha-ray and 1/10,000 of one microcurie per cm 2 for the radioactive materials not emitting alpha-ray. For the radioactive materials which can be transported as L type cargo, their quantity of radioactivity is defined in their solid, liquid and gaseous forms. The limit of quantity of such cargo is described in detail in the lists attached. Transporting conditions of A, BM and BU type cargos are specified respectively in the particular sections. (Okada, K.)

  5. Detailed characterization of Mirafiori lettuce virus-resistant transgenic lettuce.

    Science.gov (United States)

    Kawazu, Yoichi; Fujiyama, Ryoi; Noguchi, Yuji; Kubota, Masaharu; Ito, Hidekazu; Fukuoka, Hiroyuki

    2010-04-01

    Lettuce big-vein disease is caused by Mirafiori lettuce virus (MiLV), which is vectored by the soil-borne fungus Olpidium brassicae. A MiLV-resistant transgenic lettuce line was developed through introducing inverted repeats of the MiLV coat protein (CP) gene. Here, a detailed characterization study of this lettuce line was conducted by comparing it with the parental, non-transformed 'Kaiser' cultivar. There were no significant differences between transgenic and non-transgenic lettuce in terms of pollen fertility, pollen dispersal, seed production, seed dispersal, dormancy, germination, growth of seedlings under low or high temperature, chromatographic patterns of leaf extracts, or effects of lettuce on the growth of broccoli or soil microflora. A significant difference in pollen size was noted, but the difference was small. The length of the cotyledons of the transgenic lettuce was shorter than that of 'Kaiser,' but there were no differences in other morphological characteristics. Agrobacterium tumefaciens used for the production of transgenic lettuce was not detected in transgenic seeds. The transgenic T(3), T(4), and T(5) generations showed higher resistance to MiLV and big-vein symptoms expression than the resistant 'Pacific' cultivar, indicating that high resistance to lettuce big-vein disease is stably inherited. PCR analysis showed that segregation of the CP gene was nearly 3:1 in the T(1) and T(2) generations, and that the transgenic T(3) generation was homozygous for the CP gene. Segregation of the neomycin phosphotransferase II (npt II) gene was about 3:1 in the T(1) generation, but the full length npt II gene was not detected in the T(2) or T(3) generation. The segregation pattern of the CP and npt II genes in the T(1) generation showed the expected 9:3:3:1 ratio. These results suggest that the fragment including the CP gene and that including the npt II gene have been integrated into two unlinked loci, and that the T(1) plant selected in our study did

  6. Seismic Microzonation of Breginjski Kot (NW Slovenia) Based on Detailed Engineering Geological Mapping

    Science.gov (United States)

    2013-01-01

    Breginjski kot is among the most endangered seismic zones in Slovenia with the seismic hazard assessed to intensity IX MSK and the design ground acceleration of 0.250 g, both for 500-year return period. The most destructive was the 1976 Friuli Mw = 6.4 earthquake which had maximum intensity VIII-IX. Since the previous microzonation of the area was based solely on the basic geological map and did not include supplementary field research, we have performed a new soil classification of the area. First, a detailed engineering geological mapping in scale 1 : 5.000 was conducted. Mapped units were described in detail and some of them interpreted anew. Stiff sites are composed of hard to medium-hard rocks which were subjected to erosion mainly evoked by glacial and postglacial age. At that time a prominent topography was formed and different types of sediments were deposited in valleys by mass flows. A distinction between sediments and weathered rocks, their exact position, and thickness are of significant importance for microzonation. On the basis of geological mapping, a soil classification was carried out according to the Medvedev method (intensity increments) and the Eurocode 8 standard (soil factors) and two microzonation maps were prepared. The bulk of the studied area is covered by soft sediments and nine out of ten settlements are situated on them. The microzonation clearly points out the dependence of damage distribution in the case of 1976 Friuli earthquake to local site effects. PMID:24453884

  7. Idealized simulation of the Colorado hailstorm case: comparison of bulk and detailed microphysics

    Science.gov (United States)

    Geresdi, I.

    One of the purposes of the Fourth Cloud Modeling Workshop was to compare different microphysical treatments. In this paper, the results of a widely used bulk treatment and five versions of a detailed microphysical model are presented. Sensitivity analysis was made to investigate the effect of bulk parametrization, ice initiation technique, CCN concentration and collision efficiency of rimed ice crystal-drop collision. The results show that: (i) The mixing ratios of different species of hydrometeors calculated by bulk and one of the detailed models show some similarity. However, the processes of hail/graupel formation are different in the bulk and the detailed models. (ii) Using different ice initiation in the detailed models' different processes became important in the hail and graupel formation. (iii) In the case of higher CCN concentration, the mixing ratio of liquid water, hail and graupel were more sensitive to the value of collision efficiency of rimed ice crystal-drop collision. (iv) The Bergeron-Findeisen process does not work in the updraft core of a convective cloud. The vapor content was always over water saturation; moreover, the supersaturation gradually increased after the appearance of precipitation ice particles.

  8. Details from the Dashboard: Charter Schools by Geographic Region

    Science.gov (United States)

    National Alliance for Public Charter Schools, 2012

    2012-01-01

    While a majority of charter schools nationwide operate in urban and suburban areas, charter schools exist in all corners of the nation, and are expanding into all types of communities. This "Details from the Dashboard" report presents statistics on the number of charter schools and students enrolled in charter schools by the four geographic…

  9. Details from the Dashboard: Charter School Race/Ethnicity Demographics

    Science.gov (United States)

    National Alliance for Public Charter Schools, 2012

    2012-01-01

    This "Details from the Dashboard" report examines race/ethnicity breakouts for public charter schools and traditional public schools at the state and the school district level. The data in this report indicate that in the large majority of states, the race/ethnicity student demographics of charter schools are almost identical to those of the…

  10. Pharmaceutical crystallography: is there a devil in the details?

    DEFF Research Database (Denmark)

    Bond, A. D.

    2012-01-01

    Modern instruments for small-molecule crystallography continue to become more sophisticated and more automated. This technical progress provides a basis for frontier research in chemical and pharmaceutical crystallography, but it also encourages analytical crystallographers to become more...... are presented for pharmaceutical compounds, and the potential importance of the "details" in pharmaceutical crystallography is discussed....

  11. HDR IMAGING FOR FEATURE DETECTION ON DETAILED ARCHITECTURAL SCENES

    Directory of Open Access Journals (Sweden)

    G. Kontogianni

    2015-02-01

    Full Text Available 3D reconstruction relies on accurate detection, extraction, description and matching of image features. This is even truer for complex architectural scenes that pose needs for 3D models of high quality, without any loss of detail in geometry or color. Illumination conditions influence the radiometric quality of images, as standard sensors cannot depict properly a wide range of intensities in the same scene. Indeed, overexposed or underexposed pixels cause irreplaceable information loss and degrade digital representation. Images taken under extreme lighting environments may be thus prohibitive for feature detection/extraction and consequently for matching and 3D reconstruction. High Dynamic Range (HDR images could be helpful for these operators because they broaden the limits of illumination range that Standard or Low Dynamic Range (SDR/LDR images can capture and increase in this way the amount of details contained in the image. Experimental results of this study prove this assumption as they examine state of the art feature detectors applied both on standard dynamic range and HDR images.

  12. Visual long-term memory has a massive storage capacity for object details

    OpenAIRE

    Brady, Timothy F.; Konkle, Talia; Alvarez, George A.; Oliva, Aude

    2008-01-01

    One of the major lessons of memory research has been that human memory is fallible, imprecise, and subject to interference. Thus, although observers can remember thousands of images, it is widely assumed that these memories lack detail. Contrary to this assumption, here we show that long-term memory is capable of storing a massive number of objects with details from the image. Participants viewed pictures of 2,500 objects over the course of 5.5 h. Afterward, they were shown pairs of images an...

  13. Qualifications manual for Inspection and Enforcement personnel. Volume I. Detailed data sheets

    International Nuclear Information System (INIS)

    Bartley, H.J.; Heyer, F.H.K.; Schwartz, E.G.; Harrison, O.J.; Krass, I.W.; Welsh, D.M.

    1978-06-01

    This document is the General Research Corporation (GRC) final report on Task I Job/Position Qualifications Statements for the Headquarters and regional position of NRC/IE. It reflects the results of upgrading, expanding, and reformating the preliminary Task I report. To accomplish this, GRC made a thorough examination of all data developed during Task I, Task II (Career Fields), Task III (Training Evaluation), and Task IV (Hiring Qualifications), to include NRC/IE comments and management decisions received. The reformated Job/Position Qualifications Statements resulting from this effort (Appendix A) identify three job qualifications categories for each position--performance, attributes, and knowledge. Two formats are provided: a summarized one for manpower management in Volume I and a detailed one for career and training management in Volume II. In addition to recommending approval of the job/position qualifications, GRC proposes their use in conjunction with the hiring qualifications in the Task IV report to update NRC/IE job descriptions

  14. Detailed characterization of welding fumes in personal exposure samples

    International Nuclear Information System (INIS)

    Quémerais, B; Mino, James; Amin, M R; Golshahi, H; Izadi, H

    2015-01-01

    The objective of the project was to develop a method allowing for detailed characterization of welding particles including particle number concentration, size distribution, surface chemistry and chemical composition of individual particles, as well as metal concentration of various welding fumes in personal exposure samples using regular sampling equipment. A sample strategy was developed to evaluate the variation of the collection methods on mass concentration. Samples were collected with various samplers and filters at two different locations using our collection system. The first location was using a robotic welding system while the second was manual welding. Collected samples were analysed for mass concentration using gravimetryand metal concentration using ICP/OES. More advanced analysis was performed on selected filters using X-Ray Photoelectron Spectroscopy to determine surface composition of the particles, and X-Ray Diffraction to determine chemical composition of the fumes. Results showed that the robotic system had a lot of variation in space when the collection system was located close to the weld. Collection efficiency was found to be quite variable depending upon the type of filter. As well, metal concentrations in blank filters were dependent upon the type of filter with MCE presenting with the highest blank values. Results obtained with the XRD and XPS systems showed that it was possible to analyse a small of powdered welding fume sample but results on filters were not conclusive. (paper)

  15. Studies and analyses of the management of scientific research and development, including implementation and application at NASA centers

    Science.gov (United States)

    Rubenstein, A. H.

    1975-01-01

    Summary results obtained through the Program of Research on the Management of Research and Development (POMRAD) were presented. The nature of the overall program and the specific projects undertaken were described. Statistical data is also given concerning the papers, publications, people, and major program areas associated with the program. The actual list of papers, names of doctoral and masters theses, and other details of the program are included as appendices.

  16. Development of Reference Equations of State for Refrigerant Mixtures Including Hydrocarbons

    Science.gov (United States)

    Miyamoto, Hiroyuki; Watanabe, Koichi

    In recent years, most accurate equations of state for alternative refrigerants and their mixtures can easily be used via convenient software package, e.g., REFPROP. In the present paper, we described the current state-of-the-art equations of state for refrigerant mixtures including hydrocarbons as components. Throughout our discussion, the limitation of the available experimental data and the necessity of the improvement against the arbitrary fitting of recent modeling were confirmed. The enough number of reliable experimental data, especially for properties in the higher pressures and temperatures and for derived properties, should be accumulated in the near future for the development of the physically-sound theoretical background. The present review argued about the possibility of the progress for the future thermodynamic property modeling throughout the detailed discussion regarding the several types of the equations of state as well as the recent innovative measurement technique.

  17. Detailed free span assessment for Mexilhao flow lines

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Antonio; Franco, Luciano; Eigbe, Uwa; BomfimSilva, Carlos [INTECSEA, Houston, TX (United States); Escudero, Carlos [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The subsea gas production system of Mexilhao Field SPS-35, Santos Basin, offshore Brazil, is composed basically of two rigid 12.75 inches production flow lines approximately 21 km long installed in a fairly rough seabed. During the basic design, the free span assessment was performed considering the maximum allowable free span length determined by the response model proposed by DNV-RP-F105. This approach resulted in a large number of predicted free span requiring corrections, leading to a higher capital cost for the project. In this sense, a detailed free span VIV fatigue assessment was proposed, considering multi-spans and multi-mode effects and also the post lay survey data. The assessment followed the DNV-RP-F105 recommendations for multi-spans and multi-mode effects, using Finite Element Analysis to determine the natural frequencies, mode shapes and corresponding stresses associated with the mode shapes. The assessment was performed in three stages, the first during the detailed design as part of the bottom roughness analysis using the expected residual pipelay tension. The second stage was performed after pipelay, considering the post-lay survey data, where the actual requirements for span correction were determined. Actual pipelay tension was used and seabed soil stiffness adjusted in the model to match the as-laid pipeline profile obtained from the survey data. The first and second stage assessments are seamlessly automated to speed up the evaluation process and allow for quick response in the field, which was important to keep the construction vessel time minimized. The third stage was performed once the corrections of the spans were made and the purpose was to confirm that the new pipeline configuration along the supported spans had sufficient fatigue life for the temporary and operational phases. For the assessment of all three stages, the probability of occurrence and directionality of the near bottom current was considered to improve prediction of the

  18. Details of insect wing design and deformation enhance aerodynamic function and flight efficiency.

    Science.gov (United States)

    Young, John; Walker, Simon M; Bomphrey, Richard J; Taylor, Graham K; Thomas, Adrian L R

    2009-09-18

    Insect wings are complex structures that deform dramatically in flight. We analyzed the aerodynamic consequences of wing deformation in locusts using a three-dimensional computational fluid dynamics simulation based on detailed wing kinematics. We validated the simulation against smoke visualizations and digital particle image velocimetry on real locusts. We then used the validated model to explore the effects of wing topography and deformation, first by removing camber while keeping the same time-varying twist distribution, and second by removing camber and spanwise twist. The full-fidelity model achieved greater power economy than the uncambered model, which performed better than the untwisted model, showing that the details of insect wing topography and deformation are important aerodynamically. Such details are likely to be important in engineering applications of flapping flight.

  19. Relativistic effects in local inertial frames including parametrized-post-Newtonian effects

    International Nuclear Information System (INIS)

    Shahid-Saless, B.; Ashby, N.

    1988-01-01

    We use the concept of a generalized Fermi frame to describe relativistic effects, due to local and distant sources of gravitation, on a body placed in a local inertial frame of reference. In particular we have considered a model of two spherically symmetric gravitating point sources, moving in circular orbits around a common barycenter where one of the bodies is chosen to be the local and the other the distant one. This has been done using the slow-motion, weak-field approximation and including four of the parametrized-post-Newtonian (PPN) parameters. The position of the classical center of mass must be modified when the PPN parameter zeta 2 is included. We show that the main relativistic effect on a local satellite is described by the Schwarzschild field of the local body and the nonlinear term corresponding to the self-interaction of the local source with itself. There are also much smaller terms that are proportional, respectively, to the product of the potentials of local and distant bodies and to the distant body's self-interactions. The spatial axes of the local frame undergo geodetic precession. In addition we have an acceleration of the order of 10/sup -11/ cm sec -2 that vanish in the case of general relativity, which is discussed in detail

  20. In Vitro and In Silico Risk Assessment in Acquired Long QT Syndrome: The Devil Is in the Details.

    Science.gov (United States)

    Lee, William; Windley, Monique J; Vandenberg, Jamie I; Hill, Adam P

    2017-01-01

    Acquired long QT syndrome, mostly as a result of drug block of the Kv11. 1 potassium channel in the heart, is characterized by delayed cardiac myocyte repolarization, prolongation of the T interval on the ECG, syncope and sudden cardiac death due to the polymorphic ventricular arrhythmia Torsade de Pointes (TdP). In recent years, efforts are underway through the Comprehensive in vitro proarrhythmic assay (CiPA) initiative, to develop better tests for this drug induced arrhythmia based in part on in silico simulations of pharmacological disruption of repolarization. However, drug binding to Kv11.1 is more complex than a simple binary molecular reaction, meaning simple steady state measures of potency are poor surrogates for risk. As a result, there is a plethora of mechanistic detail describing the drug/Kv11.1 interaction-such as drug binding kinetics, state preference, temperature dependence and trapping-that needs to be considered when developing in silico models for risk prediction. In addition to this, other factors, such as multichannel pharmacological profile and the nature of the ventricular cell models used in simulations also need to be considered in the search for the optimum in silico approach. Here we consider how much of mechanistic detail needs to be included for in silico models to accurately predict risk and further, how much of this detail can be retrieved from protocols that are practical to implement in high throughout screens as part of next generation of preclinical in silico drug screening approaches?

  1. Material Details in Edith Wharton’s Writings

    Directory of Open Access Journals (Sweden)

    Almasa Mulalić

    2012-10-01

    Full Text Available Edith Wharton was among the most prominent writers of her time and could compete with any of her contemporary colleagues. However, she as a female writer rose above her colleagues in her style and attitudes towards novel writing. The central themes in her novels were the conflict between social and individual fulfillment, repressed sexuality, and the manners of old families and the new elite, who had made their fortunes in more recent years. The contradictions in the upper class society were yet another theme that intrigued Wharton. The question of what is moral to one part of the society did not necessarily mean that it is moral for the other part of the society. Some people could at that time escape without any hidden or open punishment from the rest of the society if they were enough skillful and clever. On the other hand, for some people it was difficult to avoid pressure from the society and behave according what their mind and heart were telling them. This paper in particular deals with the Wharton's biographical background with the special attention to her family and life experience and how it influence and shaped her style of writing. The paper also deals with material and graphic details in her novels and the reasons behind usage of those graphic details. Wharton's novel The Age of Innocence is still one of the most read novels and is required reading in High Schools and at the Universities. The final part of the paper deals with the abovementioned novel that influenced and shaped the writings of the generations of writers after her death.

  2. Applying Transition Action Detail Strategy on Written Text of EFL Young Learners

    Directory of Open Access Journals (Sweden)

    Yeasy Agustina Sari

    2017-06-01

    Full Text Available Mastering English, as foreign language need a lot of time since it is a continuing process. English foreign language of young learners, however, can’t be mastered by memorizing. The young learners should have strategy, which can be used as the direction of the classroom activites to help the students enhancing of language skill, specially in writting. There were the problem to be solved in this study, namely the students have difficult to construct the written text. The strategies which were used in the learning process were boring. Hence, the researcher tried to solve students’ difficulty in written text through Transition Action Detail Strategy. This study focused on two variables. The independent variable was Transition Action Detail Strategy, meanwhile dependent variable was written text. The researcher used true experimental design which consist of control group and experimental group. The subject of this research was students of young learner at the eight grade of English Course at Payakumbuh. The result revealed that Transition Action Detail Strategy was a good strategy that can influence the students’ narrative text. By using df.70, the writer not found it in the table. Because 70 was higher than 60 and smaller than 120. Then, the results from interpolation by using df.70, it could be known that the critical value of   t-table for the 5% level was 1.990, the critical value of t-table for the 1% level was 2.638. From these all the data analysis, it can be seen that t-observed (4.763 was higher than t-table (5% =1.990, 1% = 2.638. The data confirm that t-observed  is higher than t-table, therefore it can be inferred that Ha is accepted and Ho is rejected. It means that there is significant influence of applying Transition Action Detail Strategy on Wwritten Text of Young learners.   Key words: Transition Action Detail Strategy, Young Learners, English Foreign Language, English  Course.

  3. Framework programme for detailed characterisation in connection with construction and operation of a final repository for spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    2010-10-15

    This report presents a programme for the detailed investigations planned to be applied during construction and operation of the repository for spent nuclear fuel at Forsmark. The report is part of SKB's application according to the Nuclear Activities Act. The detailed investigations shall provide relevant data on and site-descriptive models for the bedrock, soil deposits and eco-system of the site in order to facilitate a step-wise design and construction of the final repository. This shall be implemented in a manner that all demands on long-term safety are fulfilled, including accurate documentation of the construction work, and so that assessments of the environmental impact of the repository can be made. For the operational phase, the detailed investigations should also provide support to the deposition process with related decisions, thereby enabling fulfilment of the design premises for the siting and construction of deposition tunnels and deposition holes, as well as for deposition of canisters, and for the subsequent backfilling and closure of the repository. The Observational Method will be applied during the construction of the repository. This method entails establishing in advance acceptable limits of behaviour regarding selected geoscientific parameters and preparing a plan with measures to keep the outcome within these limits. Predictions of expected rock properties are established for each tunnel section. The outcome after excavation is compared with the acceptable range of outcomes. Information from detailed characterization will be of essential importance for application of the Observational Method and for adapting the repository to the prevailing rock properties. SKB has for the past several decades developed methods for site characterisation, applying both above- and underground investigation techniques. Experiences from this work, put into practice during the site investigations, has resulted in a solid knowledge and understanding of the

  4. Citygml and the Streets of New York - a Proposal for Detailed Street Space Modelling

    Science.gov (United States)

    Beil, C.; Kolbe, T. H.

    2017-10-01

    Three-dimensional semantic city models are increasingly used for the analysis of large urban areas. Until now the focus has mostly been on buildings. Nonetheless many applications could also benefit from detailed models of public street space for further analysis. However, there are only few guidelines for representing roads within city models. Therefore, related standards dealing with street modelling are examined and discussed. Nearly all street representations are based on linear abstractions. However, there are many use cases that require or would benefit from the detailed geometrical and semantic representation of street space. A variety of potential applications for detailed street space models are presented. Subsequently, based on related standards as well as on user requirements, a concept for a CityGML-compliant representation of street space in multiple levels of detail is developed. In the course of this process, the CityGML Transportation model of the currently valid OGC standard CityGML2.0 is examined to discover possibilities for further developments. Moreover, a number of improvements are presented. Finally, based on open data sources, the proposed concept is implemented within a semantic 3D city model of New York City generating a detailed 3D street space model for the entire city. As a result, 11 thematic classes, such as roadbeds, sidewalks or traffic islands are generated and enriched with a large number of thematic attributes.

  5. Sellafield site (including Drigg) emergency scheme manual

    International Nuclear Information System (INIS)

    1987-02-01

    This Emergency Scheme defines the organisation and procedures available should there be an accident at the Sellafield Site which results in, or may result in, the release of radioactive material, or the generation of a high radiation field, which might present a hazard to employees and/or the general public. This manual covers the general principles of the total emergency scheme and those detailed procedures which are not specific to any single department. (U.K.)

  6. Po Superconducting Magnet:detail of the windings

    CERN Multimedia

    1982-01-01

    The Po superconducting dipole was built as a prototype beam transport magnet for the SPS extracted proton beam Po. Its main features were: coil aperture 72 mm, length 5 m, room-temperature yoke, NbTi cable conductor impregnated with solder, nominal field 4.2 T at 4.7 K (87% of critical field). It reached its nominal field without any quench. The photo shows a detail of the inner layer winding before superposing the outer layer to form the complete coil of a pole. Worth noticing is the interleaved glass-epoxy sheet (white) with grooved channels for the flow of cooling helium. See also 8307552X.

  7. Generation and memory for contextual detail.

    Science.gov (United States)

    Mulligan, Neil W

    2004-07-01

    Generation enhances item memory but may not enhance other aspects of memory. In 12 experiments, the author investigated the effect of generation on context memory, motivated in part by the hypothesis that generation produces a trade-off in encoding item and contextual information. Participants generated some study words (e.g., hot-c__) and read others (e.g., hot-cold). Generation consistently enhanced item memory but did not enhance context memory. More specifically, generation disrupted context memory for the color of the target word but did not affect context memory for location, background color, and cue-word color. The specificity of the negative generation effect in context memory argues against a general item-context trade-off. A processing account of generation meets greater success. In addition, the results provide no evidence that generation enhances recollection of contextual details. Copyright 2004 APA, all rights reserved

  8. Inventory of uranium resources potency at Kawat area, upper Mahakam, East Kalimantan detailed prospecting stage

    International Nuclear Information System (INIS)

    Ngadenin; I Gde Sukadana; Adi Gunawan Muhammad; Suripto

    2011-01-01

    Result of the general prospecting in East Kalimantan has found several radioactivity outcrop anomalies at upper Mahakam in the acid volcanic rock area which is approximately 25 km 2 in wide. The objective of the research is to know detailed geological information and characteristic of uranium mineralization. Method of this research are detailed geological, radiometric and geochemical mapping 1:10.000 on scale. The lithology of Kawat area is composed of seven units of rock. They are black clay unit, feldspatic sandstone unit, Nyaan rhyolite unit, lower andesite unit, Kawat rhyolite unit, upper andesite unit and tuffaceous sandstone unit. Evolving fault is dextral fault and normal fault. The trending of dextral fault is west-east and southwest-northeast, meanwhile the trending of normal faults is west-east and southwest northeast. There are two period of uranium mineralization occurrences in the area, the first is connected with the eruption of Nyaan rhyolite magma and the second is connected with the eruption of Kawat rhyolite magma. Uranium mineralization occurred in the stage of hydrothermal process and including in the pneumatogenic class of volcanogenic uranium deposits. This investigation has yielded two sites of potential uranium sector are the Nyaan sector with an area of about 6 km 2 and Kawat sector with an area of about 10 km 2 . (author)

  9. Business Management Simulations – a detailed industry analysis as well as recommendations for the future

    Directory of Open Access Journals (Sweden)

    Michael Batko

    2016-06-01

    Full Text Available Being exposed to serious games showed that some simulations widely vary in quality and learning outcome. In order to get to the bottom of best practices a detailed review of business management simulation literature was conducted. Additionally, an industry analysis was performed, by interviewing 17 simulation companies, testing a range of full and demo games, and conducting secondary research. The findings from both research efforts were then collated and cross-referenced against each other in order to determine three things: firstly, the practices and features used by simulation companies that have not yet been the subject of academic research; secondly, the most effective features, elements and inclusions within simulations that best assist in the achievement of learning outcomes and enhancement the user experience; and finally, ‘best practices’ in teaching a business management course in a university or company with the assistance of a simulation. Identified gaps in the current research were found to include the effectiveness of avatars, transparent pricing and the benefits of competing the simulation against other teams as opposed to the computer. In relation to the second and third objectives of the research, the findings were used to compile a business plan, with detailed recommendations for companies looking to develop a new simulation, and for instructors implementing and coordinating the use of a simulation in a business management context.

  10. Recent developments in the detailed modelling of power house environmental conditions using GOTHIC

    International Nuclear Information System (INIS)

    Wong, R.C.; Fluke, R.J.; Yim, K.; Rossitter, B.G.

    1997-01-01

    Environmental qualification of safety equipment in the powerhouse requires detailed information on the predicted harsh conditions that can arise following a steam line break. Although lumped parameter codes provide quick assessments of global conditions, the results are unsatisfactory because the spatial detail needed to evaluate specific equipment, or indeed to optimize and confirm the design adequacy of mitigating features, is not available. To overcome these problems, new models have been developed to provide detailed three-dimensional information using the GOTHIC code. Furthermore, new animated graphical displays help the designer visualize and fully comprehend the buoyancy driven steam flow within the powerhouse. This has lead to quick optimization of the placement, size and opening time of the emergency venting system, thereby mitigating the conditions for which safety equipment must be qualified. This has resulted in significant cost savings for the environmental qualification programme. (author)

  11. Surface hopping, transition state theory, and decoherence. II. Thermal rate constants and detailed balance

    Energy Technology Data Exchange (ETDEWEB)

    Jain, Amber; Subotnik, Joseph E., E-mail: subotnik@sas.upenn.edu [Department of Chemistry, University of Pennsylvania, 231 South 34th Street, Philadelphia, Pennsylvania 19104 (United States)

    2015-10-07

    We investigate a simple approach to compute a non-adiabatic thermal rate constant using the fewest switches surface hopping (FSSH) dynamics. We study the effects of both decoherence (using our augmented-FSSH (A-FSSH) algorithm) and forbidden hops over a large range of parameters, including high and low friction regimes, and weak and strong electronic coupling regimes. Furthermore, when possible, we benchmark our results against exact hierarchy equations of motion results, where we usually find a maximum error of roughly a factor of two (at reasonably large temperatures). In agreement with Hammes-Schiffer and Tully, we find that a merger of transition state theory and surface hopping can be both accurate and efficient when performed correctly. We further show that detailed balance is followed approximately by A-FSSH dynamics.

  12. [Comparison of film-screen combination in a contrast detail diagram and with interactive image analysis. 1: Contrast detail diagram].

    Science.gov (United States)

    Hagemann, G; Eichbaum, G

    1997-07-01

    The following three film-screen combinations were compared: a) a combination of anticrossover film and UV-light emitting screens, b) a combination of blue-light emitting screens and film, and c) a conventional green fluorescing screen film combination. Radiographs of a specially designed plexiglass phantom (0.2 x 0.2 x 0.12 m3) were obtained that contained bar patterns of lead and plaster (calcium sulfate) to test high and intermediate contrast resolution and bar patterns of air to test low contrast resolution, respectively. An aluminum step wedge was integrated to evaluate dose-density curves of the radiographs. The dose values for the various step thicknesses were measured as percentage of the dose value in air for 60, 81, and 117 kV. Exposure conditions were the following: 12 pulse generator, 0.6 mm focus size, 4.7 mm aluminum prefilter, a grid with 40 lines/cm (12:1), and a focus-detector distance of 1.15 m. The thresholds of visible bars of the various pattern materials were assessed by seven radiologists, one technician, and the authors. The resulting contrast detail diagram could not prove any significant differences between the three tested screen film combinations. The pairwise comparison, however, found 8 of the 18 paired differences to be statistically significant between the conventional and the two new screen-film combinations. The authors concluded that subjective visual assessment of the threshold in a contrast detail study alone is of only limited value to grade image quality if no well-defined criteria are used (BIR report 20 [1989] 137-139). The statistical approach of paired differences of the estimated means appeared to be more appropriate.

  13. Relevance of detail in basal topography for basal slipperiness inversions: a case study on Pine Island Glacier, Antarctica

    Science.gov (United States)

    Kyrke-Smith, Teresa M.; Gudmundsson, G. Hilmar; Farrell, Patrick E.

    2018-04-01

    Given high-resolution satellite-derived surface elevation and velocity data, ice-sheet models generally estimate mechanical basal boundary conditions using surface-to-bed inversion methods. In this work, we address the sensitivity of results from inversion methods to the accuracy of the bed elevation data on Pine Island Glacier. We show that misfit between observations and model output is reduced when high-resolution bed topography is used in the inverse model. By looking at results with a range of detail included in the bed elevation, we consider the separation of basal drag due to the bed topography (form drag) and that due to inherent bed properties (skin drag). The mean value of basal shear stress is reduced when more detailed topography is included in the model. This suggests that without a fully resolved bed a significant amount of the basal shear stress recovered from inversion methods may be due to the unresolved bed topography. However, the spatial structure of the retrieved fields is robust as the bed accuracy is varied; the fields are instead sensitive to the degree of regularisation applied to the inversion. While the implications for the future temporal evolution of PIG are not quantified here directly, our work raises the possibility that skin drag may be overestimated in the current generation of numerical ice-sheet models of this area. These shortcomings could be overcome by inverting simultaneously for both bed topography and basal slipperiness.

  14. A Procedure to Determine the Coordinated Chromium and Calcium Isotopic Composition of Astromaterials Including the Chelyabinsk Meteorite

    Science.gov (United States)

    Tappa, M. J.; Mills, R. D.; Ware, B.; Simon, J. I.

    2014-01-01

    The isotopic compositions of elements are often used to characterize nucelosynthetic contributions in early Solar System objects. Coordinated multiple middle-mass elements with differing volatilities may provide information regarding the location of condensation of early Solar System solids. Here we detail new procedures that we have developed to make high-precision multi-isotope measurements of chromium and calcium using thermal ionization mass spectrometry, and characterize a suite of chondritic and terrestrial material including two fragments of the Chelyabinsk LL-chondrite.

  15. CADDIS Volume 2. Sources, Stressors and Responses: Herbicides - Detailed Conceptual Diagram

    Science.gov (United States)

    Introduction to the herbicides module, when to list herbicides as a candidate cause, ways to measure herbicides, simple and detailed conceptual diagrams for herbicides, herbicides module references and literature reviews.

  16. CADDIS Volume 2. Sources, Stressors and Responses: Insecticides - Detailed Conceptual Diagram

    Science.gov (United States)

    Introduction to the insecticides module, when to list insecticides as a candidate cause, ways to measure insecticides, simple and detailed conceptual diagrams for insecticides, insecticides module references and literature reviews.

  17. CADDIS Volume 2. Sources, Stressors and Responses: Sediments - Detailed Conceptual Diagram

    Science.gov (United States)

    Introduction to the Sediments module, when to list Sediments as a candidate cause, ways to measure Sediments, simple and detailed conceptual diagrams for Sediments, Sediments module references and literature reviews.

  18. CADDIS Volume 2. Sources, Stressors and Responses: Temperature - Detailed Conceptual Diagram

    Science.gov (United States)

    Introduction to the temperature module, when to list temperature as a candidate cause, ways to measure temperature, simple and detailed conceptual diagrams for temperature, temperature module references and literature reviews.

  19. First-trimester screening for trisomies 18 and 13, triploidy and Turner syndrome by detailed early anomaly scan.

    Science.gov (United States)

    Wagner, P; Sonek, J; Hoopmann, M; Abele, H; Kagan, K O

    2016-10-01

    To examine the performance of first-trimester ultrasound screening for trisomies 18 and 13, triploidy and Turner syndrome based on fetal nuchal translucency thickness (NT), additional fetal ultrasound markers including anatomy of the nasal bone (NB), blood flow across the tricuspid valve (TV) and through the ductus venosus (DV) and a detailed fetal anomaly scan at 11-13 weeks' gestation. This was a retrospective case-matched study involving pregnant women at 11-13 weeks' gestation. The study population consisted of fetuses with trisomy 18, trisomy 13, triploidy or Turner syndrome. For each fetus with an abnormal karyotype, 50 randomly selected euploid fetuses were added to the study population. In all cases, the crown-rump length and NT were measured. In addition NB, TV flow and DV flow were examined. The summed risk for trisomies 21, 18 and 13 was computed based on: first, maternal age (MA); second, MA and fetal NT; third, MA, NT and one of the markers NB, TV flow or DV flow; fourth, MA, NT and all these markers combined; fifth, MA, NT and fetal anomalies; and, finally, MA, NT, all markers and fetal anomalies. The study population consisted of 4550 euploid and 91 aneuploid fetuses. Median NT was 1.8 mm in euploid fetuses and 4.8, 6.8, 1.8 and 10.0 mm in fetuses with trisomy 18, trisomy 13, triploidy and Turner syndrome, respectively. The NB, TV flow and DV flow were abnormal in 48 (1.1%), 34 (0.7%) and 99 (2.2%) euploid fetuses, respectively, and in 42 (46.2%), 31 (34.1%) and 62 (68.1%) aneuploid fetuses, respectively. At least one defect was found in 60 (1.3%) euploid and in 76 (83.5%) aneuploid fetuses. For a false-positive rate of 3%, the detection rate for screening based on MA and fetal NT was 75.8%. It increased to 84.6-86.8% when including one of the additional ultrasound markers and it was 90.1% when all three markers were included. When screening was based on MA, fetal NT and a detailed anomaly scan, the detection rate was 94.5% and increased to 95

  20. Spin foam propagator: A new perspective to include the cosmological constant

    Science.gov (United States)

    Han, Muxin; Huang, Zichang; Zipfel, Antonia

    2018-04-01

    In recent years, the calculation of the first nonvanishing order of the metric 2-point function or graviton propagator in a semiclassical limit has evolved as a standard test for the credibility of a proposed spin foam model. The existing results of spin foam graviton propagators rely heavily on the so-called double scaling limit where spins j are large and the Barbero-Immirzi parameter γ is small such that the area A ∝j γ is approximately constant. However, it seems that this double scaling limit is bound to break down in models including a cosmological constant. We explore this in detail for the recently proposed model [7 H. M. Haggard, M. Han, W. Kaminski, and A. Riello, Nucl. Phys. B900, 1 (2015), 10.1016/j.nuclphysb.2015.08.023.] by Haggard, Han, Kaminski, and Riello and discuss alternative definitions of a graviton propagator, in which the double scaling limit can be avoided.

  1. The Devil Is in the Details: Evidence from the GED on the Role of Examination System Details in Determining Who Passes. NCSALL Reports #16.

    Science.gov (United States)

    Tyler, John H.; Murnane, Richard J.; Willett, John B.

    A study used data from a long-standing examination system, the General Educational Development (GED) certificate, to illustrate that the details of examination systems have marked impacts on the number of test takers who obtain the desired credential and on the racial/ethnic composition of passers. Data provided by the Florida Department of…

  2. Impact of Model Detail of Synchronous Machines on Real-time Transient Stability Assessment

    DEFF Research Database (Denmark)

    Weckesser, Johannes Tilman Gabriel; Jóhannsson, Hjörtur; Østergaard, Jacob

    2013-01-01

    In this paper, it is investigated how detailed the model of a synchronous machine needs to be in order to assess transient stability using a Single Machine Equivalent (SIME). The results will show how the stability mechanism and the stability assessment are affected by the model detail. In order...... of the machine models is varied. Analyses of the results suggest that a 4th-order model may be sufficient to represent synchronous machines in transient stability studies....

  3. CADDIS Volume 2. Sources, Stressors and Responses: Ammonia - Detailed Conceptual Diagram

    Science.gov (United States)

    Introduction to the ammonia module, when to list ammonia as a candidate cause, ways to measure ammonia, simple and detailed conceptual diagrams for ammonia, literature reviews and references for the ammonia module.

  4. GIS-assisted spatial analysis for urban regulatory detailed planning: designer's dimension in the Chinese code system

    Science.gov (United States)

    Yu, Yang; Zeng, Zheng

    2009-10-01

    By discussing the causes behind the high amendments ratio in the implementation of urban regulatory detailed plans in China despite its law-ensured status, the study aims to reconcile conflict between the legal authority of regulatory detailed planning and the insufficient scientific support in its decision-making and compilation by introducing into the process spatial analysis based on GIS technology and 3D modeling thus present a more scientific and flexible approach to regulatory detailed planning in China. The study first points out that the current compilation process of urban regulatory detailed plan in China employs mainly an empirical approach which renders it constantly subjected to amendments; the study then discusses the need and current utilization of GIS in the Chinese system and proposes the framework of a GIS-assisted 3D spatial analysis process from the designer's perspective which can be regarded as an alternating processes between the descriptive codes and physical design in the compilation of regulatory detailed planning. With a case study of the processes and results from the application of the framework, the paper concludes that the proposed framework can be an effective instrument which provides more rationality, flexibility and thus more efficiency to the compilation and decision-making process of urban regulatory detailed plan in China.

  5. Strategy for improving the detailed examination rate for colorectal cancer screening. New approach for detailed colorectal cancer examination. Study for optimal pre-treatment for CT colonography

    International Nuclear Information System (INIS)

    Mitsushima, Toru; Fujiwara, Masanori; Nagata, Koichi

    2012-01-01

    In order to drastically improve the detailed examination rate for strategic colorectal cancer examination in Japan, it is necessary to introduce CT colonography (CTC) as a detailed examination method for colorectal cancer examination, in addition to colonoscopy (CS) which is the conventional detailed examination method. In our study, a cleansing enema/contrast solution (3% Nif-C) was prepared by adding 60 ml of a water-soluble iodine-based contrast agent (Gastrografin) and water to an oral cleansing enema agent (Niflec) in solid (powder) form to a final amount of 2000 ml. The solution was compared with a Niflec solution. In terms of patient's acceptability, more than half of the examined patients answered ''easier to drink than the Niflec solution'' or ''as easy to drink as the Niflec solution. '' Also, the Nif-C solution was comparable or superior to the Niflec solution in terms of cleansing enema effects. Regarding imaging effects essential for CTC, the CT level was found to be 200 HU or greater for any large intestine region upon CTC using the Nif-C solution. Thus, practically sufficient imaging effects were achieved. In conclusion, CTC with pretreatment involving a cleansing enema with oral administration of 3% Nif-C is superior to CS in terms of patient's acceptability. In addition, at least in view of the overseas reports on CTC, there is no particular problem in terms of diagnostic accuracy. Thus, CTC is expected to resolve various problems related to colorectal cancer examination in Japan. (author)

  6. Detailed α -decay study of 180Tl

    Science.gov (United States)

    Andel, B.; Andreyev, A. N.; Antalic, S.; Barzakh, A.; Bree, N.; Cocolios, T. E.; Comas, V. F.; Diriken, J.; Elseviers, J.; Fedorov, D. V.; Fedosseev, V. N.; Franchoo, S.; Ghys, L.; Heredia, J. A.; Huyse, M.; Ivanov, O.; Köster, U.; Liberati, V.; Marsh, B. A.; Nishio, K.; Page, R. D.; Patronis, N.; Seliverstov, M. D.; Tsekhanovich, I.; Van den Bergh, P.; Van De Walle, J.; Van Duppen, P.; Venhart, M.; Vermote, S.; Veselský, M.; Wagemans, C.

    2017-11-01

    A detailed α -decay spectroscopy study of 180Tl has been performed at ISOLDE (CERN). Z -selective ionization by the Resonance Ionization Laser Ion Source (RILIS) coupled to mass separation provided a high-purity beam of 180Tl. Fine-structure α decays to excited levels in the daughter 176Au were identified and an α -decay scheme of 180Tl was constructed based on an analysis of α -γ and α -γ -γ coincidences. Multipolarities of several γ -ray transitions deexciting levels in 176Au were determined. Based on the analysis of reduced α -decay widths, it was found that all α decays are hindered, which signifies a change of configuration between the parent and all daughter states.

  7. Data on the detail information of influence of substrate temperature on the film morphology and photovoltaic performance of non-fullerene organic solar cells.

    Science.gov (United States)

    Zhang, Jicheng; Xie, SuFei; Lu, Zhen; Wu, Yang; Xiao, Hongmei; Zhang, Xuejuan; Li, Guangwu; Li, Cuihong; Chen, Xuebo; Ma, Wei; Bo, Zhishan

    2017-10-01

    This data contains additional data related to the article "Influence of Substrate Temperature on the Film Morphology and Photovoltaic Performance of Non-fullerene Organic Solar Cells" (Jicheng Zhang et al., In press) [1]. Data include measurement and characterization instruments and condition, detail condition to fabricate norfullerene solar cell devices, hole-only and electron-only devices. Detail condition about how to control the film morphology of devices via tuning the temperature of substrates was also displayed. More information and more convincing data about the change of film morphology for active layers fabricated from different temperature, which is attached to the research article of "Influence of Substrate Temperature on the Film Morphology and Photovoltaic Performance of Non-fullerene Organic Solar Cells" was given.

  8. Integration of snow management practices into a detailed snow pack model

    Science.gov (United States)

    Spandre, Pierre; Morin, Samuel; Lafaysse, Matthieu; Lejeune, Yves; François, Hugues; George-Marcelpoil, Emmanuelle

    2016-04-01

    The management of snow on ski slopes is a key socio-economic and environmental issue in mountain regions. Indeed the winter sports industry has become a very competitive global market although this economy remains particularly sensitive to weather and snow conditions. The understanding and implementation of snow management in detailed snowpack models is a major step towards a more realistic assessment of the evolution of snow conditions in ski resorts concerning past, present and future climate conditions. Here we describe in a detailed manner the integration of snow management processes (grooming, snowmaking) into the snowpack model Crocus (Spandre et al., Cold Reg. Sci. Technol., in press). The effect of the tiller is explicitly taken into account and its effects on snow properties (density, snow microstructure) are simulated in addition to the compaction induced by the weight of the grooming machine. The production of snow in Crocus is carried out with respect to specific rules and current meteorological conditions. Model configurations and results are described in detail through sensitivity tests of the model of all parameters related to snow management processes. In-situ observations were carried out in four resorts in the French Alps during the 2014-2015 winter season considering for each resort natural, groomed only and groomed plus snowmaking conditions. The model provides realistic simulations of the snowpack properties with respect to these observations. The main uncertainty pertains to the efficiency of the snowmaking process. The observed ratio between the mass of machine-made snow on ski slopes and the water mass used for production was found to be lower than was expected from the literature, in every resort. The model now referred to as "Crocus-Resort" has been proven to provide realistic simulations of snow conditions on ski slopes and may be used for further investigations. Spandre, P., S. Morin, M. Lafaysse, Y. Lejeune, H. François and E. George

  9. New research builds strong case for including informal migrant ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-04-21

    Apr 21, 2016 ... The informal sector is a major source of income for the urban poor. ... Two new studies supported by IDRC seek to address this gap. ... provided a detailed analysis of businesses owned by cross-border traders in a number of ...

  10. In Vitro and In Silico Risk Assessment in Acquired Long QT Syndrome: The Devil Is in the Details

    Directory of Open Access Journals (Sweden)

    William Lee

    2017-11-01

    Full Text Available Acquired long QT syndrome, mostly as a result of drug block of the Kv11. 1 potassium channel in the heart, is characterized by delayed cardiac myocyte repolarization, prolongation of the T interval on the ECG, syncope and sudden cardiac death due to the polymorphic ventricular arrhythmia Torsade de Pointes (TdP. In recent years, efforts are underway through the Comprehensive in vitro proarrhythmic assay (CiPA initiative, to develop better tests for this drug induced arrhythmia based in part on in silico simulations of pharmacological disruption of repolarization. However, drug binding to Kv11.1 is more complex than a simple binary molecular reaction, meaning simple steady state measures of potency are poor surrogates for risk. As a result, there is a plethora of mechanistic detail describing the drug/Kv11.1 interaction—such as drug binding kinetics, state preference, temperature dependence and trapping—that needs to be considered when developing in silico models for risk prediction. In addition to this, other factors, such as multichannel pharmacological profile and the nature of the ventricular cell models used in simulations also need to be considered in the search for the optimum in silico approach. Here we consider how much of mechanistic detail needs to be included for in silico models to accurately predict risk and further, how much of this detail can be retrieved from protocols that are practical to implement in high throughout screens as part of next generation of preclinical in silico drug screening approaches?

  11. Variationally stable treatment of two- and three-photon detachment of H- including electron-correlation effects

    International Nuclear Information System (INIS)

    Liu, C.; Gao, B.; Starace, A.F.

    1992-01-01

    A variationally stable, adiabatic hyperspherical treatment of two- and three-photon detachment of H - is presented. Results are compared with analytic predictions of a zero-range potential model of H - . Detailed comparisions are made also with other theoretical results which include the effects of electron correlations. We predict analytically (and demonstrate numerically) an extreme sensitivity of the theoretical predictions to any errors in the value of the electron affinity employed. In an Appendix we show that the low-intensity limit of the Keldysh treatment [Sov. Phys. JETP 20, 1307 (1965)] of detachment of an electron bound in a zero-range potential agrees with the results of a perturbative treatment

  12. Wind Turbine Rotor Simulation via CFD Based Actuator Disc Technique Compared to Detailed Measurement

    Directory of Open Access Journals (Sweden)

    Esmail Mahmoodi

    2015-10-01

    Full Text Available In this paper, a generalized Actuator Disc (AD is used to model the wind turbine rotor of the MEXICO experiment, a collaborative European wind turbine project. The AD model as a combination of CFD technique and User Defined Functions codes (UDF, so-called UDF/AD model is used to simulate loads and performance of the rotor in three different wind speed tests. Distributed force on the blade, thrust and power production of the rotor as important designing parameters of wind turbine rotors are focused to model. A developed Blade Element Momentum (BEM theory as a code based numerical technique as well as a full rotor simulation both from the literature are included into the results to compare and discuss. The output of all techniques is compared to detailed measurements for validation, which led us to final conclusions.

  13. Going off script: Effects of awe on memory for script-typical and -irrelevant narrative detail.

    Science.gov (United States)

    Danvers, Alexander F; Shiota, Michelle N

    2017-09-01

    People often filter their experience of new events through knowledge they already have; for example, encoding new events by relying on prototypical event "scripts" at the expense of actual details. Previous research suggests that positive affect often increases this tendency. Three studies assessed whether awe-an emotion elicited by perceived vastness, and thought to promote cognitive accommodation-has the opposite effect, reducing rather than increasing reliance on event scripts. True/false questions on details of a short story about a romantic dinner were used to determine whether awe (a) reduces the tendency to impute script-consistent but false details into memory, and/or (b) promotes memory of unexpected details. Across studies we consistently found support for the first effect; evidence for the second was less consistent. Effects were partially mediated by subjective awe, and independent of other aspects of subjective affect. Results suggest that awe reduces reliance on internal knowledge in processing new events. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  14. Design overview of the ITER core CXRS fast shutter and manufacturing implications during the detailed design work

    Energy Technology Data Exchange (ETDEWEB)

    Castaño Bardawil, David Antonio, E-mail: d.castano.bardawil@fz-juelich.de [Institute of Energy and Climate Research – Plasma Physics, Forschungszentrum Jülich GmbH (Germany); Mertens, Philippe [Institute of Energy and Climate Research – Plasma Physics, Forschungszentrum Jülich GmbH (Germany); Offermanns, Guido; Behr, Wilfried [Central Institute for Engineering, Electronics and Analytics, Forschungszentrum Jülich GmbH (Germany); Hawkes, Nick [Culham Centre for Fusion Energy (Germany); Krasikov, Yury [Institute of Energy and Climate Research – Plasma Physics, Forschungszentrum Jülich GmbH (Germany); Balboa, Itziar [Culham Centre for Fusion Energy (Germany); Biel, Wolfgang; Samm, Ulrich [Institute of Energy and Climate Research – Plasma Physics, Forschungszentrum Jülich GmbH (Germany)

    2015-10-15

    Highlights: • Keeping key parameters during design has facilitated quick iteration assessment. • Proper pipe bending and welding procedures were established for manufacturing. • Bellows assemblies and manufacturing were adequately defined for the actuator. • Successful cooperation between our in-house workshop and the industry. • Full shutter manufacturing drawings were successfully developed. - Abstract: At first a detailed fast shutter design was finalized for the ITER core charge exchange recombination spectroscopy (CXRS) diagnostic. The shutter has approximately 70 kg of mass and a length of 2.1 m. It operates in fractions of a second (0.7 s) protecting critical optical components against degradation and providing means of calibration for the optical system. The shutter structure is driven by a bidirectional frictionless helium actuator, with forces and axial strokes of 3.4 kN and 2 mm respectively. The shutter structure consists of: (a) two blades made of CuCrZr and stainless steel, calibration surfaces (currently Al{sub 2}O{sub 3}) on the top and on the bottom a protective TZM (Mo–0.5Ti–0.08Zr) screens, (b) two arms interconnected that form one cooling circuit including the blades, (c) a bumper system to limit the arms movement, and (d) a support. A description of these components and their functions are given in this paper, followed by some issues, and their corresponding solutions or ongoing investigations, encountered during the design work. Detailed manufacturing drawings have been developed as the deliverable final product of this design stage, and are used in the prototyping phase which includes testing, numerical benchmarking, and validation of the shutter concept.

  15. A mass conserving level set method for detailed numerical simulation of liquid atomization

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Kun; Shao, Changxiao [State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310027 (China); Yang, Yue [State Key Laboratory of Turbulence and Complex Systems, Peking University, Beijing 100871 (China); Fan, Jianren, E-mail: fanjr@zju.edu.cn [State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310027 (China)

    2015-10-01

    An improved mass conserving level set method for detailed numerical simulations of liquid atomization is developed to address the issue of mass loss in the existing level set method. This method introduces a mass remedy procedure based on the local curvature at the interface, and in principle, can ensure the absolute mass conservation of the liquid phase in the computational domain. Three benchmark cases, including Zalesak's disk, a drop deforming in a vortex field, and the binary drop head-on collision, are simulated to validate the present method, and the excellent agreement with exact solutions or experimental results is achieved. It is shown that the present method is able to capture the complex interface with second-order accuracy and negligible additional computational cost. The present method is then applied to study more complex flows, such as a drop impacting on a liquid film and the swirling liquid sheet atomization, which again, demonstrates the advantages of mass conservation and the capability to represent the interface accurately.

  16. SCRIC: a code dedicated to the detailed emission and absorption of heterogeneous NLTE plasmas; application to xenon EUV sources

    International Nuclear Information System (INIS)

    Gaufridy de Dortan, F. de

    2006-01-01

    Nearly all spectral opacity codes for LTE and NLTE plasmas rely on configurations approximate modelling or even supra-configurations modelling for mid Z plasmas. But in some cases, configurations interaction (either relativistic and non relativistic) induces dramatic changes in spectral shapes. We propose here a new detailed emissivity code with configuration mixing to allow for a realistic description of complex mid Z plasmas. A collisional radiative calculation. based on HULLAC precise energies and cross sections. determines the populations. Detailed emissivities and opacities are then calculated and radiative transfer equation is resolved for wide inhomogeneous plasmas. This code is able to cope rapidly with very large amount of atomic data. It is therefore possible to use complex hydrodynamic files even on personal computers in a very limited time. We used this code for comparison with Xenon EUV sources within the framework of nano-lithography developments. It appears that configurations mixing strongly shifts satellite lines and must be included in the description of these sources to enhance their efficiency. (author)

  17. Detailed forest formation mapping in the land cover map series for the Caribbean islands

    Science.gov (United States)

    Helmer, E. H.; Schill, S.; Pedreros, D. H.; Tieszen, L. L.; Kennaway, T.; Cushing, M.; Ruzycki, T.

    2006-12-01

    Forest formation and land cover maps for several Caribbean islands were developed from Landsat ETM+ imagery as part of a multi-organizational project. The spatially explicit data on forest formation types will permit more refined estimates of some forest attributes. The woody vegetation classification scheme relates closely to that of Areces-Malea et al. (1), who classify Caribbean vegetation according to standards of the US Federal Geographic Data Committee (FGDC, 1997), with modifications similar to those in Helmer et al. (2). For several of the islands, we developed image mosaics that filled cloudy parts of scenes with data from other scene dates after using regression tree normalization (3). The regression tree procedure permitted us to develop mosaics for wet and drought seasons for a few of the islands. The resulting multiseason imagery facilitated separation between classes such as seasonal evergreen forest, semi-deciduous forest (including semi-evergreen forest), and drought deciduous forest or woodland formations. We used decision tree classification methods to classify the Landsat image mosaics to detailed forest formations and land cover for Puerto Rico (4), St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines and Grenada. The decision trees classified a stack of raster layers for each mapping area that included the Landsat image bands and various ancillary raster data layers. For Puerto Rico, for example, the ancillary data included climate parameters (5). For some islands, the ancillary data included topographic derivatives such as aspect, slope and slope position, SRTM (6) or other topographic data. Mapping forest formations with decision tree classifiers, ancillary geospatial data, and cloud-free image mosaics, accurately distinguished spectrally similar forest formations, without the aid of ecological zone maps, on the islands where the approach was used. The approach resulted in maps of forest formations with comparable or better detail

  18. Comparison of Detailed and Simplified Models of Human Atrial Myocytes to Recapitulate Patient Specific Properties.

    Directory of Open Access Journals (Sweden)

    Daniel M Lombardo

    2016-08-01

    Full Text Available Computer studies are often used to study mechanisms of cardiac arrhythmias, including atrial fibrillation (AF. A crucial component in these studies is the electrophysiological model that describes the membrane potential of myocytes. The models vary from detailed, describing numerous ion channels, to simplified, grouping ionic channels into a minimal set of variables. The parameters of these models, however, are determined across different experiments in varied species. Furthermore, a single set of parameters may not describe variations across patients, and models have rarely been shown to recapitulate critical features of AF in a given patient. In this study we develop physiologically accurate computational human atrial models by fitting parameters of a detailed and of a simplified model to clinical data for five patients undergoing ablation therapy. Parameters were simultaneously fitted to action potential (AP morphology, action potential duration (APD restitution and conduction velocity (CV restitution curves in these patients. For both models, our fitting procedure generated parameter sets that accurately reproduced clinical data, but differed markedly from published sets and between patients, emphasizing the need for patient-specific adjustment. Both models produced two-dimensional spiral wave dynamics for that were similar for each patient. These results show that simplified, computationally efficient models are an attractive choice for simulations of human atrial electrophysiology in spatially extended domains. This study motivates the development and validation of patient-specific model-based mechanistic studies to target therapy.

  19. Radioactive contamination mapping system detailed design report

    International Nuclear Information System (INIS)

    Bauer, R.G.; O'Callaghan, P.B.

    1996-08-01

    The Hanford Site's 100 Area production reactors released radioactively and chemically contaminated liquids into the soil column. The primary source of the contaminated liquids was reactor coolant and various waste waters released from planned liquid discharges, as well as pipelines, pipe junctions, and retention basins leaking into the disposal sites. Site remediation involves excavating the contaminated soils using conventional earthmoving techniques and equipment, treating as appropriate, transporting the soils, and disposing the soils at ERDF. To support remediation excavation, disposal, and documentation requirements, an automated radiological monitoring system was deemed necessary. The RCMS (Radioactive Contamination Mapping System) was designed to fulfill this need. This Detailed Design Report provides design information for the RCMS in accordance with Bechtel Hanford, Inc. Engineering Design Project Instructions

  20. Detailed investigation of a time-of-flight neutron spectrometer

    International Nuclear Information System (INIS)

    Elevant, T.; Trostell, B.

    1981-02-01

    Properties of a neutron spectrometer and telescope, based on double neutron interaction in hydrogen based scintillators and neutron time-of-flight technique, have been investigated in detail. Theoretical scaling of the resolutions with the flight path length and scattering angle have been confirmed by experimental results. Important parameters in connection with calibration of the spectrometer are discussed and calculated relative resolutions of the ion temperature are shown when applied to a fusion deuterium plasma. (Auth.)

  1. A Statistical Model for Synthesis of Detailed Facial Geometry

    OpenAIRE

    Golovinskiy, Aleksey; Matusik, Wojciech; Pfister, Hanspeter; Rusinkiewicz, Szymon; Funkhouser, Thomas

    2006-01-01

    Detailed surface geometry contributes greatly to the visual realism of 3D face models. However, acquiring high-resolution face geometry is often tedious and expensive. Consequently, most face models used in games, virtual reality, or computer vision look unrealistically smooth. In this paper, we introduce a new statistical technique for the analysis and synthesis of small three-dimensional facial features, such as wrinkles and pores. We acquire high-resolution face geometry for people across ...

  2. Evaluation of outgassing, tear strength, and detail reproduction in alginate substitute materials.

    Science.gov (United States)

    Baxter, R T; Lawson, N C; Cakir, D; Beck, P; Ramp, L C; Burgess, J O

    2012-01-01

    To compare three alginate substitute materials to an alginate impression material for cast surface porosity (outgassing), tear strength, and detail reproduction. Detail reproduction tests were performed following American National Standards Institute/American Dental Association (ANSI/ADA) Specification No. 19. To measure tear strength, 12 samples of each material were made using a split mold, placed in a water bath until testing, and loaded in tension until failure at a rate of 500 mm/min using a universal testing machine. For cast surface porosity testing, five impressions of a Teflon mold with each material were placed in a water bath (37.8°C) for the in-mouth setting time and poured with vacuum-mixed Silky Rock die stone at 5, 10, 30, and 60 minutes from the start of mixing. The gypsum samples were analyzed with a digital microscope for surface porosity indicative of hydrogen gas release by comparing the surface obtained at each interval with four casts representing no, little, some, and significant porosity. Data analysis was performed using parametric and Kruskal-Wallis analysis of variance (ANOVA), Tukey/Kramer post-hoc tests (α=0.05), and individual Mann-Whitney U tests (α=0.0167). All alginate substitute materials passed the detail reproduction test. Tear strength of the alginate substitute materials was significantly better than alginate and formed three statistically different groups: AlgiNot had the lowest tear strength, Algin-X Ultra had the highest tear strength, and Position Penta Quick had intermediate tear strength. Significant variation in outgassing existed between materials and pouring times (palginate substitute materials exhibited the least outgassing and cast porosity 60 minutes after mixing. Detail reproduction and tear strength of alginate substitute materials were superior to traditional alginate. The outgassing effect was minimal for most materials tested. Alginate substitute materials are superior replacements for irreversible

  3. Harmonic Frequency Lowering: Effects on the Perception of Music Detail and Sound Quality.

    Science.gov (United States)

    Kirchberger, Martin; Russo, Frank A

    2016-02-01

    A novel algorithm for frequency lowering in music was developed and experimentally tested in hearing-impaired listeners. Harmonic frequency lowering (HFL) combines frequency transposition and frequency compression to preserve the harmonic content of music stimuli. Listeners were asked to make judgments regarding detail and sound quality in music stimuli. Stimuli were presented under different signal processing conditions: original, low-pass filtered, HFL, and nonlinear frequency compressed. Results showed that participants reported perceiving the most detail in the HFL condition. In addition, there was no difference in sound quality across conditions. © The Author(s) 2016.

  4. Harmonics and voltage stability analysis in power systems including

    Indian Academy of Sciences (India)

    In this study, non-sinusoidal quantities and voltage stability, both known as power quality criteria, are examined together in detail. The widespread use of power electronics elements cause the existence of significant non-sinusoidal quantities in the system. These non-sinusoidal quantities can create serious harmonic ...

  5. Corrections on Grammar, Sentence Variety and Developing Detail to Qualify Academic Essay of Indonesian Learners

    Science.gov (United States)

    Solikhah, Imroatus

    2017-01-01

    This experimental research examines: (1) significant differences of corrections on grammar, sentence variety and developing details on the quality of the essay by Indonesian learners; and (2) different effect of corrections on grammar, sentence variety, and developing details on the quality of the essay. Treatments for each were served as follows:…

  6. Optimal design of power system stabilizer for power systems including doubly fed induction generator wind turbines

    International Nuclear Information System (INIS)

    Derafshian, Mehdi; Amjady, Nima

    2015-01-01

    This paper presents an evolutionary algorithm-based approach for optimal design of power system stabilizer (PSS) for multi-machine power systems that include doubly fed induction generator wind turbines. The proposed evolutionary algorithm is an improved particle swarm optimization named chaotic particle swarm optimization with passive congregation (CPSO-PC) applied for finding the optimal settings of PSS parameters. Two different eigenvalue-based objectives are combined as the objective function for the optimization problem of tuning PSS parameters. The first objective function comprises the damping factor of lightly damped electro-mechanical modes and the second one includes the damping ratio of these modes. The effectiveness of the proposed method to design PSS for the power systems including DFIG (Doubly Fed Induction Generator) is extensively demonstrated through eigenvalue analysis and time-domain simulations and also by comparing its simulation results with the results of other heuristic optimization approaches. - Highlights: • A new optimization model for design of PSS in power systems including DFIG is proposed. • A detailed and realistic modeling of DFIG is presented. • A new evolutionary algorithm is suggested for solving the optimization problem of designing PSS

  7. Exercises in experimental physics including complete solutions

    International Nuclear Information System (INIS)

    Fleischmann, R.; Loos, G.

    1978-01-01

    This collection of exercises is not only addressed to students of physics but also to scientists of other branches and to engineers. Possibilities are offered to the student to gain control on his growing knowledge from the beginning of his studies until the examination. The individual exercises are linked thematically and are mostly composed by several single tasks. Complete and detailed numerical solutions are presented. The topics covered are: (1) Mechanics, (2) thermodynamics, (3) oscillations and their propagation, (4) electricity and magnetism, (5) atomic physics, and (6) nuclear physics. (KBE)

  8. Construction details and test results from RHIC sextupoles

    International Nuclear Information System (INIS)

    Lindner, M.; Anerella, M.; Ganetis, G.

    1993-01-01

    Four 8 cm aperture sextupoles have been built at BNL to verify the magnetic performance of this magnet in the RHIC installation. Two significantly different mechanical configurations have been designed, and two magnets of each design have been built, and successfully tested, and have exceeded the required minimum quench current by a substantial margin. This report describes the assembly details of the second configuration, which is the final production configuration. In addition the first industry built production sextupole has been delivered and tested. This report presents the results of quench tests on all 5 magnets and field measurements on the first production sextupole

  9. On learning to inquire: Revisiting the detailed inquiry.

    Science.gov (United States)

    Appelbaum, David

    2010-03-01

    This paper describes the author's experience of initial disorientation when encountering for the first time in supervision an interpersonal analytic approach with an emphasis on active questioning of the patient through the use of a detailed inquiry. This initial disorientation is linked to a predominant trend in psychoanalysis that generally opposes the use of questions as a significant means of analytic interaction. In contrast, Interpersonal approaches that make free use of inquiry are discussed in light of the author's clinical experience that learning to inquire contributed to a more finely tuned awareness of the analytic process.

  10. New CSIR tool produces detailed maps of SA’s economic geography

    CSIR Research Space (South Africa)

    Mass media

    2007-10-01

    Full Text Available A new digital mapping and geographic analysis platform (GAP) is enabling researchers and decision-makers to estimate the spatial distribution of economic activity in South Africa in greater detail than ever before. The result of an 18 month...

  11. Memory judgements: the contribution of detail and emotion to assessments of believability and reliability.

    Science.gov (United States)

    Justice, Lucy V; Smith, Harriet M J

    2018-06-06

    In legal settings, jury members, police, and legal professionals often have to make judgements about witnesses' or victims' memories of events. Without a scientific understanding of memory, (often erroneous) beliefs are used to make decisions. Evaluation of the literature identified two prevalent beliefs that could influence judgements: (1) memory operates like a video recorder therefore, accounts that are detailed are more believable than those containing vague descriptions, and (2) memories recalled with congruent emotion are more believable than those recalled with incongruent emotion. A 2 (emotionality: emotional, non-emotional) × 2 (detail: high, low) factorial design was generated. In line with previous research, participants made believability judgements (Experiment 1) but uniquely, participants were also asked to judge the reliability of the rememberer's recall (Experiment 2). Self-reported confidence, personality measures, and political orientation were also recorded. Believability judgements did not vary as a function of detail or emotion but detailed accounts were judged as more reliable than vague accounts. Confidence and believability were positively correlated, whereas the confidence-reliability relationship was more complex. Personality and political measures were independent of judgements of both constructs. Our results suggest that believability and reliability are distinct constructs and should be examined as such in future research.

  12. Survey and Down-Selection of Acid Gas Removal Systems for the Thermochemical Conversion of Biomass to Ethanol with a Detailed Analysis of an MDEA System

    Energy Technology Data Exchange (ETDEWEB)

    Nexant, Inc., San Francisco, California

    2011-05-01

    The first section (Task 1) of this report by Nexant includes a survey and screening of various acid gas removal processes in order to evaluate their capability to meet the specific design requirements for thermochemical ethanol synthesis in NREL's thermochemical ethanol design report (Phillips et al. 2007, NREL/TP-510-41168). MDEA and selexol were short-listed as the most promising acid-gas removal agents based on work described in Task 1. The second report section (Task 2) describes a detailed design of an MDEA (methyl diethanol amine) based acid gas removal system for removing CO2 and H2S from biomass-derived syngas. Only MDEA was chosen for detailed study because of the available resources.

  13. ICECON: a computer program used to calculate containment back pressure for LOCA analysis (including ice condenser plants)

    International Nuclear Information System (INIS)

    1976-07-01

    The ICECON computer code provides a method for conservatively calculating the long term back pressure transient in the containment resulting from a hypothetical Loss-of-Coolant Accident (LOCA) for PWR plants including ice condenser containment systems. The ICECON computer code was developed from the CONTEMPT/LT-022 code. A brief discussion of the salient features of a typical ice condenser containment is presented. Details of the ice condenser models are explained. The corrections and improvements made to CONTEMPT/LT-022 are included. The organization of the code, including the calculational procedure, is outlined. The user's manual, to be used in conjunction with the CONTEMPT/LT-022 user's manual, a sample problem, a time-step study (solution convergence) and a comparison of ICECON results with the results of the NSSS vendor are presented. In general, containment pressure calculated with the ICECON code agree with those calculated by the NSSS vendor using the same mass and energy release rates to the containment

  14. Monitoring upstream sinkhole development by detailed sonar profiling

    Energy Technology Data Exchange (ETDEWEB)

    Rigbey, S. [Acres International Ltd., Niagara Falls, ON (Canada)

    2004-09-01

    the toe of the structure. Sonar profiling has achieved accuracy and repeatability in the range of 100 mm. Overhangs and pipes in sinkholes can be surveyed in detail by lowering the sonar head to immediately above the reservoir bottom, thereby correcting data for any underwater pitch, roll and yaw of the head. The development of this simple and inexpensive method for detailed sonar surveys of reservoirs and earth dams has proven to be a useful tool in dam safety assessments. Sonar currently represents the only way to fully inspect upstream slopes and reservoir bottoms. Detailed sonar profiling has also been used to determine the effectiveness of the infilling program. 8 figs.

  15. Massive Memory Revisited: Limitations on Storage Capacity for Object Details in Visual Long-Term Memory

    Science.gov (United States)

    Cunningham, Corbin A.; Yassa, Michael A.; Egeth, Howard E.

    2015-01-01

    Previous work suggests that visual long-term memory (VLTM) is highly detailed and has a massive capacity. However, memory performance is subject to the effects of the type of testing procedure used. The current study examines detail memory performance by probing the same memories within the same subjects, but using divergent probing methods. The…

  16. Addition of generic medication vouchers to a pharmacist academic detailing program: effects on the generic dispensing ratio in a physician-hospital organization.

    Science.gov (United States)

    Bhargava, Vinay; Greg, Mark E; Shields, Mark C

    2010-01-01

    Generic dispensing ratio (GDR) is an important measure of efficiency in pharmacy benefit management. A few studies have examined the effects of academic detailing or generic drug samples on GDR. On July 1, 2007, a physician-hospital organization (PHO) with a pay-for-performance incentive for generic utilization initiated a pilot generic medication voucher program that augmented its existing pharmacist-led academic detailing efforts. No published studies have examined the role of generic medication vouchers in promoting generic drug utilization. To determine if supplementing an existing academic detailing initiative in a PHO with a generic medication voucher program would be more effective in increasing the GDR compared with academic detailing alone. The intervention took place over the 9-month period from July 1, 2007, through March 31, 2008. Vouchers provided patients with the first fill of a 30-day supply of a generic drug at no cost to the patient for 8 specific generic medications obtained through a national community pharmacy chain. The study was conducted in a PHO composed of 7 hospitals and approximately 2,900 physicians (900 primary care providers [PCPs] and 2,000 specialists). Of the approximately 300 PCP practices, 21 practices with at least 2 physicians each were selected on the basis of high prescription volume (more than 500 pharmacy claims for the practice over a 12-month pre-baseline period) and low GDR (practice GDR less than 55% in the 12-month pre-baseline period). These 21 practices were then randomized to a control group of academic detailing alone or the intervention group that received academic detailing plus generic medication vouchers. One of 10 intervention groups declined to participate, and 2 of 11 control groups dropped out of the PHO. GDR was calculated monthly for all pharmacy claims including the 8 voucher medications. GDR was defined as the ratio of the total number of paid generic pharmacy claims divided by the total number of paid

  17. Detailed balance condition and ultraviolet stability of scalar field in Horava-Lifshitz gravity

    International Nuclear Information System (INIS)

    Borzou, Ahmad; Lin, Kai; Wang, Anzhong

    2011-01-01

    Detailed balance and projectability conditions are two main assumptions when Horava recently formulated his theory of quantum gravity - the Horava-Lifshitz (HL) theory. While the latter represents an important ingredient, the former often believed needs to be abandoned, in order to obtain an ultraviolet stable scalar field, among other things. In this paper, because of several attractive features of this condition, we revisit it, and show that the scalar field can be stabilized, if the detailed balance condition is allowed to be softly broken. Although this is done explicitly in the non-relativistic general covariant setup of Horava-Melby-Thompson with an arbitrary coupling constant λ, generalized lately by da Silva, it is also true in other versions of the HL theory. With the detailed balance condition softly breaking, the number of independent coupling constants can be still significantly reduced. It is remarkable to note that, unlike other setups, in this da Silva generalization, there exists a master equation for the linear perturbations of the scalar field in the flat Friedmann-Robertson-Walker background

  18. DNS with detailed and tabulated chemistry of engine relevant igniting systems

    NARCIS (Netherlands)

    Bekdemir, C.; Somers, L.M.T.; Goey, de L.P.H.

    2014-01-01

    Developments in modern engine technology are moving towards a regime with fuel injection uncoupled from combustion. Auto-ignition is an essential characteristic in these systems. The accurate prediction of this chemical process is of paramount importance. Tabulation techniques can provide a detailed

  19. Direct design of LPV feedback controllers: technical details and numerical examples

    OpenAIRE

    Novara, Carlo

    2014-01-01

    The paper contains technical details of recent results developed by the author, regarding the design of LPV controllers directly from experimental data. Two numerical examples are also presented, about control of the Duffing oscillator and control of a two-degree-of-freedom manipulator.

  20. Model reduction of detailed-balanced reaction networks by clustering linkage classes

    NARCIS (Netherlands)

    Rao, Shodhan; Jayawardhana, Bayu; van der Schaft, Abraham; Findeisen, Rolf; Bullinger, Eric; Balsa-Canto, Eva; Bernaerts, Kristel

    2016-01-01

    We propose a model reduction method that involves sequential application of clustering of linkage classes and Kron reduction. This approach is specifically useful for chemical reaction networks with each linkage class having less number of reactions. In case of detailed balanced chemical reaction