WorldWideScience

Sample records for ni tsuite ashi

  1. [Original meaning of ashi and derivation of ashi point].

    Science.gov (United States)

    Jiang, Shan; Zhao, Jingsheng

    2016-02-01

    The accurate annotation of ashi points depends on the understanding of ashi. The main reasons for the divergence of current three viewpoints on the annotation of ashi are the literature basis and its different interpretations. By conducting a comprehensive collection of ancient and modern literature and analyzing different interpretation methods, the original meaning of ashi is studied, so as to explain the understanding of ashi points and ashi method.

  2. [Conception of Ashi points].

    Science.gov (United States)

    Xu, Rong-dong; Li, Heng

    2005-04-01

    In the light of obscure conception of Ashi points in the circle of acupuncture and moxibustion at present, this article tries to clarify the origin and definition of Ashi points by textual research of literatures. It is put forward that Ashi points are not the same with "tender spot" and "Buding point, Tianying point", but are some special responding points, including regular points and extra points, when the organism is ill. When these points are pressed the organism will be comfortable or painful. And the definition, location and clinical location method of Ashi points are proposed.

  3. Lichen planus pigmetosus-like ashy dermatosis

    Directory of Open Access Journals (Sweden)

    Francesco Tripodi Cutrì

    2011-12-01

    Full Text Available Ashy dermatosis, also known as erythema dyschromicum perstans, is an idiopathic dermal melanosis of unknown etiology. We here describe an unusual case of 63-year-old Caucasian male with ashy dermatosis and skin lesion of lichen pigmentosus-like. No treatment was tried because the lesions were totally asymptomatic. After a control, three months later, all lesions had cleared up. This case is of interest because it proves the existence of ashy dermatosis with clinical aspect lichen planus pigmentosus-like. This is the first case in the literature of lichen planus pigmentosuslike ashy dermatosis confirming the view that ashy dermatosis is a variant of lichen planus without the typically band-like infiltrate and Max Joseph spaces.

  4. An IoT application development using IoTSuite

    OpenAIRE

    Chauhan, Saurabh; Patel, Pankesh

    2016-01-01

    Application development in the Internet of Things (IoT) is challenging because it involves dealing with issues that attribute to different life-cycle phases. First, the application logic has to be analyzed and then separated into a set of distributed tasks for an underlying network. Then, the tasks have to be implemented for the specific hardware. Moreover, we take different IoT applications and present development of these applications using IoTSuite. In this paper, we introduce a design and...

  5. [Origin and development of Ashi point locating method].

    Science.gov (United States)

    Zhang, Shu-Jian

    2013-02-01

    The origin and development of the Ashi point theory are arranged, it is believed that the essence of Ashi point is a point locating method and it is suitable for the location of each acupoint. Originated from Neijing (Internal Classic), this method is the primary point locating method in ancient times, corresponding to the forms of acupoints in Neijing (Internal Classic), the points are located though palpation. This point locating method can be widely used to locate the points clinically, what's more, the Ashi method is not limited to use for local tenderness. Ashi point got its conception from Qianjin Yao fang (Prescriptions Worth a Thousand Gold), under the background of acupoint channel tropism, it gradually evolved to a certain kind of point that parallel to the regular point and extra point. This process changed the clinical point locating method: regular point and extra point are located according to proportional bone measurement, while Ashi point is located by palpation. However, it betrays the classic and clinical practice gradually.

  6. Introduction of environmental endocrine disrupters; Kankyo horumon ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Nakai, S. [Japan Society for the Promotion of Science, Tokyo (Japan); Hosomi, M. [Tokyo Univ. of Agriculture and Technology, Tokyo (Japan). Faculty of Technology

    1998-11-05

    This paper describes environmental hormones. Hormones are directly secreted from endocrine gland into blood flow, and play an important role of the differentiation of textures of organisms, reproductive function, metabolism, and adjustment of nervous/immunity system. There are some substances with hormone and anti-hormone reactions within the body of organisms, which are discharged as chemical substances in the natural environment by the artificial production activities. These are extrinsic endocrine disrupters, i.e., environmental hormones. There are 67 kinds of doubtful substances. When the environmental hormones work on the certain reaction stage of hormones, the normal action of hormones is disturbed. Various anomalies of wild animals have been reported in the world, which are suggested to be caused by the environmental hormones. Effects are known on the health of Homo sapiens, such as malignant tumor. In the current stage, test methods are under development, by which the presence of endocrine disruption can be screened. The effects depend on the growing stages of organisms, and it is necessary to consider the effects on various generations. 20 refs., 2 figs., 4 tabs.

  7. Reincarnation platn of globe. Chikyu saisei keikaku ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Matsuyama, T. (Agency of Natural Resources and Energy, Tokyo (Japan))

    1990-11-30

    The period of 200 years since the Industrial Revolution has taken for the occurence of global warming up problem, and it may require to face the problem comprehensively and for long period of 100 years unit to resolve it. This reincarnation plan of globe aims to reincarnate the changed global environment hereafter by using time of about 100 years, and proposes to make the comprehensive and long term actions to suppress and reduce exhaust gases resulting the greenhouse effect by the cooperation of all nations in the world. In the former 50 years, feasible countermeasures such as deepenung of scientific knowkedges, promotion of worldwide energy saving, introduction of clean energy, development of revolutional environmental technology, expansion of CO {sub 2} absorbing sources, and technological development of energy for the next generation will be executed continuously. In the latter 50 years, the gas exhausting amount resulting the green house effect will be reduced and suppressed from these results. Owing to these measures, the reduction of gas resulting the greenhouse effect which exceeds the expectation, can clean the globe after 100 years because the cleaning results will be incorporated into the natural circulation and the green globe will be reincarnated. 1 fig., 1 tab

  8. Acute Toxicity of Sodium Fluorescein to Ashy Pebblesnails Fluminicola fuscus

    Science.gov (United States)

    Stockton, Kelly A.; Moffitt, Christine M.; Blew, David L.; Farmer, C. Neil

    2011-01-01

    Water resource agencies and groundwater scientists use fluorescein dyes to trace ground water flows that supply surface waters that may contain threatened or endangered mollusk species. Since little is known of the toxicity of sodium fluorescein to mollusks, we tested the toxicity of sodium fluorescein to the ashy pebblesnail Fluminicola fuscus. The pebblesnail was selected as a surrogate test species for the threatened Bliss Rapid snail Taylorcocha serpenticola that is endemic to the Snake River and its tributaries in the Hagerman Valley, Idaho. In laboratory tests, we expose replicated groups of snails to a series of concentrations of fluorescein in a static 24 h exposure at 15 degrees C. Following the exposure, we removed snails, rinsed them, and allowed a 48 h recovery in clean water before recording mortality. We estimated 377 mg/L as the median lethal dose. Mortality to snails occurred at concentrations well above those expected in test wells during the monitoring efforts.

  9. Erythema Dyschromicum Perstans: Identical to Ashy Dermatosis or Not

    Directory of Open Access Journals (Sweden)

    Takafumi Numata

    2015-07-01

    Full Text Available Erythema dyschromicum perstans (EDP and ashy dermatosis (AD are pigmentary disorders of unknown etiology. EDP is usually considered to be identical to AD; however, a new clinical classification for EDP was proposed in the recent literature. Herein, we report a typical case of EDP observed in an African-American man. Interestingly, the late skin lesions in this case fit the criteria of AD as well. While there appear to be a few clinical cases that can be diagnosed as both EDP and AD based on the clinical course, the preponderance of the evidence in the published reports of EDP and AD and the clinical findings reported here strongly suggest that they are two distinct entities in terms of the extent of the inflammation, albeit on the same spectrum of pigment disorders.

  10. Ashi points, Ashi method and pressing reaction%阿是穴、阿是之法与按压反应

    Institute of Scientific and Technical Information of China (English)

    王朝晖; 张志枫; 丁晓君; 周昌乐

    2011-01-01

    The nomination of Ashi points was reviewed, and the meaning of Ashi method was discussed in this article. On the base of further study on Huangdi Neijing ( The Yellow Emperor's Canon of Internal Medicine ) ,the general meaning of palpation at acupoints, meridians and collaterals to the process of acupoint locating were expounded. The concept of pressing reaction was proposed as well. It is held that Ashi points are a category of acupoints without specific names and definite locations. They are a kind of manifestation of reactions of acupoints,meridians and collaterals, which embody their dynamic features. Pressing reaction mainly manifested by sensations of comfort, pain, and moreover, relieving of the primary symptoms. It is the most basic evidence for us to estimate Ashi points.%回顾对阿是穴命名的认识,讨论阿是之法的含义.在进一步考查等文献的基础上,论述了腧穴经络按诊对于腧穴定位的一般意义,提出按压反应的概念.认为阿是穴是根据按压反应所确定的一类没有具体名称和既定位置的腧穴,是腧穴经络反应的一种表现形式,是腧穴经络动态属性的典型表现;按压反应突出地表现为舒快、疼痛等感觉现象,以及原有症状即时缓解等效应;按压反应是评定阿是穴的基本依据.

  11. [Research and identification of the concept and terminology of "tender-point"and "Ashi-point"].

    Science.gov (United States)

    Zhao, Jing-Sheng

    2010-10-01

    It is generally acknowledged that "tender-point is taken as the acupoint" (tender-point) and "Ashi-point" belong to the same one concept. Through a series of research and analysis, it was found that these two nomenclatures contain both identical and different points in connotation, and reflect different experience in the treatment of abundant clinical conditions. "Tender-point" is involved in the general experience, for which the affected site is punctured directly by using an acupuncture needle or stimulated by using a moxa-stick or moxa-cone. "Ashi-point" is referred to the regional reactive site, i.e., the sensitive point for acupuncture and moxibustion, which is involved in the specific experience for taking the reactive point of clinical problems as the therapeutic site. The so-called "Tianying-point" and "Buding-point" in classical books on acu-moxibustion as Qian-jin Fang (Prescriptions Worth a Thousand Gold for Emergencies), Yulong Ge (Lyrics of Jade Dragon), etc., are the same to "Tender-point" but different to "Ashi-point". Currently, explanations and clinical application about "Tender-point" have been generalized and mixed up with "Ashi-point". The author of the present paper makes an analysis on their causes.

  12. 针刀反阿是穴和阿是穴治疗网球肘疗效比较%Comparison of Efficacy on Treatment of Tennis Elbow by Needle Knife on Ashi Point and Anti-ashi Point

    Institute of Scientific and Technical Information of China (English)

    霍则军; 张文兵

    2015-01-01

    Objective:To observe effects of the needle knife on ashi point and anti-ashi point for the treat-ment of tennis elbow. Methods:Sixty patients were randomly divided into ashi point group and anti-ashi point group,30 cases in each group. Anti-ashi point is the point which is press relief local pain or disappear after find out,and Ashi point group in pain points find out,treatment 1 times every week,3 times as a period of treatment,the treatment of one period of treatment,observation curative effect after the treatment. Results:the treatment after one course of the anti-ashi point group effective rate was 93.3%,ashi point group effective rate was 66.7%. Conclusion:the anti-ashi point needle knife therapy tennis elbow on anti-ashi point effect is better than that of ashi point.%目的:观察针刀反阿是穴与阿是穴治疗网球肘的疗效。方法:将60例患者随机分为反阿是穴组和阿是穴组,每组30例。反阿是穴组在按压后使局部疼痛缓解或消失处选取穴,阿是穴组在痛点取穴,每周治疗1次,3次为1疗程,均治疗1个疗程,治疗结束后观察疗效。结果:治疗1个疗程后反阿是穴组总有效率93.3%,阿是穴组总有效率66.7%。结论:反阿是穴针刀治疗网球肘近期疗效优于阿是穴。

  13. Study on the time-domain electromagnetic responses; TDEM ho ni okeru denji oto ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Noguchi, K.; Endo, M. [Waseda University, Tokyo (Japan). School of Science and Engineering

    1997-05-27

    With an objective to perform three-dimensional analysis with high accuracy in using the electromagnetic exploration method, characteristics in electromagnetic response were analyzed, and conditions for acquiring necessary data were discussed. The discussion defined a parameter called `response anomaly` which uses response from media to standardize response only from substances with abnormal resistivity. The receivers were located uniformly on the same plane, and the response anomaly was derived from electromagnetic response from each of the three horizontal and vertical components at each receiving point, which was expressed as a contour map. The parameter for the abnormal body was consisted of location and resistivity contrast with media. Discussions using the contour map were given on the response when these factors for the parameter were varied. As a result, it was found that the response anomaly appears in the form that reflects the abnormal body, and the response anomaly of the horizontal component is superior in terms of being large. It was also referred that, as a requirement for the abnormal body which gives larger impact from the electromagnetic response, the abnormal body should have lower resistivity than that in the media, and resistivity contrast with the media should be greater. 2 refs., 7 figs., 1 tab.

  14. Robotics in port construction. Kowan kensetsu ni okeru roboto ka gijutsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Sakai, Hiroshi (Ministry of Transport, Tokyo (Japan))

    1990-02-15

    To cope positively with the problems of securing labor, improving work environment, etc., mechanization and robotics in port and marine development are the urgent subjects. Technologies for robotics of various levels are being developed, coverning data acquisition, processing, display, recording simple automation, and high inteligent fuction which can automatically make such judgement as having been done by man. Some representative cases of technological development in the fields of robotics and mechnization being carried on by the Ports and Harbors Bureau in the Ministry of Transportaion are introduced. Technological develpment required for the mechanization of rubble mound foundation construction work has been carried on. A demonstration test was carried out at Kamaishi Port, proving the practicability of the technology. Robots are developed which can walk on the sea bottom to perform underwater investigation and unmanned operation. Underwater visual device and underwater position measurement device are provided as the supporing systems. Several tests were already performed in actual sea areas and the success of the development was verified. 3 figs.

  15. 关于阿是穴若干问题再思考%Rethinking on Ashi points

    Institute of Scientific and Technical Information of China (English)

    刘涛

    2011-01-01

    对阿是穴的命名进行考证,明确阿是穴并非“痛处为是”.根据古今医家对阿是穴意义的不同认识,更加明确阿是穴包含十四经穴及奇穴;通过对阿是穴实质的讨论,得出结论,阿是穴的针感应与经穴及经外奇穴相同.%Textual research on the naming of Ashi points is carried out. And it is clarified that Ashi points are not pain "pain points". According to various comprehensions of ancient and modern physicians; it is approved that Ashi points include points of 14 meridians and extra points. And it is also concluded through exploration of essence of Ashi points that needling sensation of Ashi points is the same with regular points and extra points.

  16. Distributed Simulation of Non-Point Source Pollution in Ashi River Basin

    Institute of Scientific and Technical Information of China (English)

    Fang Ma; Xiaofeng Jiang; Li Wang; Zhe Li; Xiongwei Liang

    2015-01-01

    In order to get a thorough understanding of non⁃point source pollution, it is essential to examine its temporal and spatial distribution. A physically⁃based distributed model, Soil and Water Assessment Tool ( SWAT) , was used in this research, to quantitatively estimate the NPS load and analyze the temporal and spatial distributions of NPS pollution in Ashi River Basin. The results indicated that SWAT was suitable to simulate stream⁃flow and water quality in Ashi River Basin. Total Nitrogen which was contributed by NPS (NPS⁃TN) accounted for 32�47%-62�61%, and Total Phosphorus which was contributed by NPS (NPS⁃TP) accounted for 22�30%-57�85% of the total load respectively. In inter⁃annual timescale, both NPS⁃TN and NPS⁃TP were influenced by stream⁃flow and fertilizer. However, when compared with fertilizer, NPS pollution was more directly affected by stream⁃flow. In annual timescale, NPS⁃TN and NPS⁃TP mainly occurred in flood season (from May to September). In the aspect of space, spatial differences of NPS⁃TN and NPS⁃TP were extremely significant. The spatial variations of NPS pollution were mainly influenced by land use, precipitation, soil and slope.

  17. Genetical and biological control of cotton ashy stem caused by Macrophomina phaseolina in outdoor pot experiment.

    Science.gov (United States)

    Abd-Elsalam, Kamel Ahmed

    2010-04-01

    Two outdoor pot experiments were carried out to evaluate the reaction of 11 commercial Egyptian cotton cultivars Macrophomina phaseolina, the incitant of ashy stem in cotton and to evaluate the antagonistic ability of 27 isolates of Trichoderma sp. against pathogen cotton cultivars Giza 85, Giza 87, Giza 89 and Giza 90 were resistant to M. phaseolina because both survival and plant height of these cultivars was not affected when the soil was infested with the pathogen. None of the cultivars were found to be immune to highly pathogenic of M. phaseolina isolate. Of the 27 isolate's of Trichoderma that were evaluated, the best antagonistic performance was given by isolates nos. 2, 10, and 16 were promising for commercialization because they significantly increased survival and improved plant height and dry weight of the surviving cotton seedlings.

  18. Modern medical explanation on Ashi points%阿是穴的现代医学解析

    Institute of Scientific and Technical Information of China (English)

    杨国法; 靳聪妮; 原苏琴

    2012-01-01

    比较阿是穴和扳机点后提出扳机点可视为阿是穴的现代医学解释,并进一步探讨扳机点理论和实践对阿是穴的病理特异性、定位、干预方法的启示:阿是穴可能是中央扳机点,其病理为退变挛缩的肌小节;阿是穴不一定在疼痛野,疼痛识别有助于其立体定位;阿是穴和扳机点可以互相借鉴干预方法.这是一个理解阿是穴的新视角,对发掘、提升其理论与实践具有一定意义.%According to the comparison between Ashi points and trigger points, a modern medical explanation that trigger points could be considered as a special Ash points was put forward, and a further investigation on the enlightenment of theory and practice of trigger points to the pathological specificity, positioning and the intervention methods of trigger points was as follows:Ashi points could be central trigger points, whose pathology is degeneration and contracture of sarcomere; it is not always in the area of pain, while the signs of pain may be helpful for its stereotaxic positioning; the intervention methods of Ashi and trigger points can be learned from each other. This is a new angle of view on Ashi points, which has contributed to the exploration and improvement of its theory and practice.

  19. Clinical Study on Treatment of Myofascial Pain Syndrome with Ashi Points

    Institute of Scientific and Technical Information of China (English)

    张峻峰; 吴耀持; 韩丑萍

    2008-01-01

    Objective: To investigate the clinical efficacy of Ashi points in the treatment of myofascial pain syndrome. Method: A hundred and fifty cases were randomized into a treatment group and a control group by the order of visit. The cases in the treatment group were treated with "Stuck Needle" method in Ashi points plus tuina manipulations. The cases in the control group were treated with external local application of Votalin. The cases in both groups were treated once a day and 10 times made up one course. Results: Among 90 cases in the treatment group, 18 got clinical recovery, 34 got marked effect, 34 got certain effect, the marked effective rate was 57.8% and the total effective rate was 94.4%; while among 60 cases in the control group, 1 got clinical recovery, 18 got marked effect, 15 got certain effect, the marked effective rate was 31.7% and the total effective rate was 73.3%. Statistical management showed P<0.01, indicating a significantly better effect in the treatment group. In addition, "Stuck Needle" method in Ashi points plus tuina manipulations can effectively improve local pain, tenderness, muscle spasm and motion range of joints, and can obtain significantly better effect for muscle spasm and motion range of joints. Conclusion: This therapy is safe, reliable and effective, and therefore worth spreading for clinical application.%目的:探讨阿是穴治疗肌筋膜疼痛综合征的,临床疗效.方法:将150例患者按就诊顺序随机分为治疗组和对照组,治疗组应用阿是穴"滞针法"针刺,配合"一指禅"推拿手法治疗;对照组应用扶他林乳剂局部涂擦治疗.两组均每日治疗1次,10次为1个疗程.结果治疗组90例,临床痊愈18例,显效34例,有效34例,显效率57.8%,总有效率94.4%;对照组60例,其中临床治愈1例,显效18例,有效15例,显效率31.7%,总有效率73.3%.,两组疗效经统计学处理,P<0.01,有非常显著性差异,说明治疗组疗效明显优于对照组.同时本疗法可以有

  20. Mathematical structure of ocean container transport systems; Kaiyo container yuso system no suriteki kozo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Shinkai, A. [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Chikushi, Y. [Nippon Telegraph and Telephone Corp., Tokyo (Japan)

    1997-10-01

    Mathematical structure of a vessel arrangement program was discussed in order to learn roles of container ships in ocean transport systems among China, NIES/ASEAN countries and Japan. Formulation is possible on a mathematical handling method for sailing route connection diagrams between ports, a transport network to indicate container movements, a service network to indicate sailing routes, and a network generalizing them. This paper describes an analysis made on the container transport system between Japan and China, taken as an example. Four ports were selected each from Japan and China, and the statistical database for fiscals 1996 and 1994 was utilized to set models for: (a) the liner network system with transshipment at the port of Shanghai and (b) the cruising route system going through the ports of Yokohama, Nagoya and Kobe. A hypothesis was set that a consortium (coordinated ship allocation) can be implemented ideally and completely. The transport network (a) is lower by 10% in total cost than the transport network (b), resulting in 1.6 times greater productivity. Actual service network is closer to the network (b), but the system can be utilized for discussing guidelines on vessel arrangement programs with which shipping companies pursue better management efficiency under a condition that the consortium can be formed. 10 refs., 6 figs., 2 tabs.

  1. Geothermal gradients map of Hokkaido; Hokkaido no chion kobaizu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Akita, F.; Matsunami, T.; Wakahama, H. [Hokkaido Geological Survey, Sapporo (Japan)

    1997-06-15

    This paper outlines the newly prepared geothermal gradient map (GGM) of Hokkaido which is important for survey on geothermal and hot spring resources. The temperature data of 687 wells were compiled by data collection and field survey. The geothermal gradient was calculated from the ratio of the temperature difference between the bottom (deepest well log) and the ground surface (10degC) to a bottom depth. GGM was prepared using data of 85 wells which show real geothermal temperatures through conductive temperature profiles, or SBHT (static bottom hole temperature) calculation is possible. Geological profiles were classified into three types based on base rocks. The thermal structure of GGM was clearly divided into a high geothermal gradient over 10degC/100m, and a low one within 3degC/100m. The former showed active volcano and high geothermal areas, while the latter showed a volcanic front arc area. This underground temperature structure relates to the formation process of volcanos and the origin of magma, and is also similar to the trend of a crust thermal flow rate. The geothermal gradient increases with a decrease in Curie point depth. 26 refs., 10 figs., 2 tabs.

  2. Problem on environmental hormone (endocrine disturbing chemicals); Kankyo horumon (naibunpi kakuran kagaku busshitsu) mondai ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tawarada, T. [Kansai Electric Power Co. Inc., Osaka (Japan)

    2000-02-10

    This paper describes a problem on environmental hormone. Various chemicals discharged into environment act as hormone- like or anti-hormone-like substance. Since many such chemicals act as female hormone-like substance, those are called '(exogenous) endocrine disturbing chemicals' or 'environmental hormone'. Such chemicals include already regulated toxic PCB and dioxin, and a large amount of plastic raw materials, plasticizer and surfactant with no acute toxicity. The action mechanism of endocrine disturbing chemicals is as follows. Those bond with acceptors in place of hormone, and give incorrect directions to genes. Those may cause various disorders such as reproduction anomaly, development anomaly, immune toxicity and neuro-toxicity over several ages. For wild animals, some conceivable effects are being revealed. Since living organisms have various specificities and various experiments possible for animals are impossible for mankind, many obscure points remain unsolved. This paper presents various approaches in Japan. (NEDO)

  3. Active control of structure-borne noise. Kotaion no nodo seigyoho ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, N. (Mechanical Engineering Laboratory, Tsukuba (Japan))

    1992-06-01

    This paper describes the active control of structure-borne noise emitted from a vibrating plate. It also presents the mechanism of suppression of a rigid plate vibration from the viewpoint of a feedforward control method. First, in order to control the rigid plate vibration, two kinds of vibration control methods are proposed. One is of a progressive wave type and the other is of a standing wave type. Then, the characteristics of the sound radiated from the controlled plate are made clear. Consequently. it was shown that there existed two types in radiation efficiency, i.e., a peak type and a notch type. For the peak type, the effect of standing wave type control has higher radiation efficiency with the control than without the control, and conversely for the notch type, it has higher one without the control than with the control. Furthermore, a wave visualization system has been constructed. This system made it possible to observe progressive waves propagating on the rigid plate. 11 refs., 14 figs.

  4. Subroutine functions for generating animation data; Animation yo gazo data seisei subroutine kino ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Suematsu, K. [National Aerospace Laboratory, Tokyo (Japan)

    1992-04-01

    Animations play an important role as a means to visualize results of computer numerical simulations. This report describes various subroutine functions for animations developed for the purpose of arranging software for animations. The functions are as follows; a graphic-data transforming function, a through-vision displaying function, an image-creating function for animations, and a logograph and character data output function. The graphic-data transforming function enables such processings as clipping, shading, and through-vision transformaing, as well as transformation processing to rotate, transfer, enlarge, or reduce polygonal data. Subroutines for preparing data of oil flowchart and streamline chart, for line drawing, and for creating grid diagram for scope are provided as subroutines for creating animations. These subroutines are applied to the simulation of HOPE, a spacecraft, to verify their effectiveness. 5 refs., 9 figs., 4 tabs.

  5. Subroutine functions for generating animation data. Animation yo gazo data seisei subroutine kino ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Suematsu, K. (National Aerospace Laboratory, Tokyo (Japan))

    1992-04-01

    Animations play an important role as a means to visualize results of computer numerical simulations. This report describes various subroutine functions for animations developed for the purpose of arranging software for animations. The functions are as follows; a graphic-data transforming function, a through-vision displaying function, an image-creating function for animations, and a logograph and character data output function. The graphic-data transforming function enables such processings as clipping, shading, and through-vision transformaing, as well as transformation processing to rotate, transfer, enlarge, or reduce polygonal data. Subroutines for preparing data of oil flowchart and streamline chart, for line drawing, and for creating grid diagram for scope are provided as subroutines for creating animations. These subroutines are applied to the simulation of HOPE, a spacecraft, to verify their effectiveness. 5 refs., 9 figs., 4 tabs.

  6. Methane Gas Drainage at Kushiro Colliery; Taiheiyo tanko no gasu nuki ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-20

    Kushiro oColliery is an undersea coal mine which located in Kushiro city on the northern island Hokkaido. Current operational area is at the depth of about -650m under the Pacific Ocean and its annual production amounts to about 3.5 to 4.0 million tones of raw coal. All products are washed and supplied to domistic power utilities. Mining activities always induce methane gas emission from the coal seam into the roadway and the inflammable gas is discharged from the mine after being diluted to a safe concentration level through mine ventilation. In order to secure greater mine safety, a gas drainage system has been designed and employed. At present, around 14,000,000m{sup 3}/year of gas (30% to 40% of total gas emission) is derectly captured into the gas drainage system from the strata and mined out area. The gas recovered is used as a fuel for the heating of surface facilities of the colliery and also used for the household fuel supplied through a local gas company. (author)

  7. Safety analysis of flexible manufacturing system. Flexible seisan system no anzen kaiseki ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Mochizuki, T.; Sato, H.; Masuda, Y.; Onikubo, I.; Nagaoka, T. (Numazu Industrial Research Institute of Shizuoka Prefecture, Shizuoka (Japan))

    1993-03-01

    The fault tree method is used recently as a representative method to operate more efficiently the flexible manufacturing systems (FMS) becoming increasingly larger in scale and more complex and evaluate the system safety and reliability in design stages. This paper describes attempts to analyze FMS safety using the method. The fault tree method pursuits summit events and important anomalies in an object system retroactively along the cause direction, and links anomalies to causes using such logic gates as and-gate and or-gate. The model structure of an FMS comprises automatic warehouses, unmanned transportation vehicles, NC lathes, machining centers, robots and stations, centrally controlled by a computer. Failures in the constituting components are dealt with hardwares and softwares given safety redundancy and programs. Since the trees are for cause factors derived from empirical failures, not all of abnormal events can be handled with the present status of the method. Future requirements may include component failure processing functions and bypass processing in the softwares for the FMS. 5 refs., 6 figs.

  8. New stage of clean coal technology in Japan; Clean coal technology no aratana tenkai ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kawaguchi, Y. [Agency of Natural Resources and Energy, Tokyo (Japan)

    1996-09-01

    The paper described the positioning and new development of clean coal technology. Coal is an important resource which supplies approximately 30% of the energy consumed in all the world. In the Asian/Pacific region, especially, a share of coal in energy is high, around 60% of the world, and it is indispensable to continue using coal which is abundantly reserved. Japan continues using coal as an important energy among petroleum substituting energies taking consideration of the global environment, and is making efforts for development and promotion of clean coal technology aiming at further reduction of environmental loads. Moreover, in the Asian region where petroleum depends greatly upon outside the region, it is extremely important for stabilization of Japan`s energy supply that coal producing countries in the region promote development/utilization of their coal resources. For this, it is a requirement for Japan to further a coal policy having an outlook of securing stable coal supply/demand in the Asian region. 6 figs., 2 tabs.

  9. Environmental problem and geochemistry of rabon. Radon to kankyo mondai (chikyu kagaku ni tsuite)

    Energy Technology Data Exchange (ETDEWEB)

    Kanai, Y. (Geological Survey of Japan, Tokyo (Japan))

    1991-10-01

    With Effects of radon (Rn) on human body'' installed as a central theme, a summary is explained on the dealings of Rn with human being, method for measuring Rn, origin of Rn, method for treationg Rn in residential housings, Rn and hot spring, and geochemistry of Rn. The U.S. Environmont Protection Agency announced that Rn has a high possibility of causing lung cancers in the living environment, and that among about 130,000 fatalities annually due to lung cancer, about 5,000 to 20,000 are for Rn. If an effective dose equivalent by Rn is assumed 1, that by the Rn daughter nucleus amount to 50, showing how large the latter {prime}s effect is. The life-time risk increment Rn of a lung cancer due to chronic indoor exposure to {sup 222} Rn daughter nuclei at a constant level of 10{sup 5}Bg.h.m{sup {minus}3} annually is 0.26%, the frequency increment is 36 cases, the life expectancy loss {Delta}L, due to this is 14 days. Rn is, however, not simply hazardous, it can present a benefit as in a radioactive hot spring containing Rn at 51-4909 nC,l. 31 refs., 15 figs., 5 tabs.

  10. Fluid dynamic interface between hull and hydrofoil; Sentai to suichuyoku no ryutai rikigakuteki kansho ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kataoka, K.; Ando, J.; Nakatake, K. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1996-04-10

    For the high-speed ship with hydrofoil, it is important to grasp the mutual interference between its hydrofoil and hull. In this study, effects of the state of hydrofoils and velocity on the hull were fluid-dynamically investigated through the numerical calculation by means of Rankine source method using a Wigley model with two hydrofoils. Before considering the model with hydrofoils, the attitude change of a hull without hydrofoils during traveling in high-speed was examined. For the high-speed ship, various measuring systems have been conceived due to the large change in its attitude. The Wigley model has been used for the numerical calculation when considering the attitude change in the medium- and low-speed regions. In this study, resistance tests without constraining the sinkage and trim were conducted using a Wigley model in the high-speed region around Fn=1.0, which have not been usually conducted. The attitude changes were compared with the numerical calculation results by the Rankine source method. The wave making resistance and attitude change of the Wigley model with hydrofoils were also calculated. 12 refs., 10 figs.

  11. Organization for breakthrough. How skunkworks developed airplanes; Breakthrough no tameno kaihatsu soshiki. Rokkidosha skunkworks ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Masuda, K. [Civil Aircraft Engineering Service Co., Bellevue (United States)

    1998-07-05

    `Skunkworks` is stated to be a secret research institute or equipments for developing reformative products in the fields of aviation and aerospace. Skunkworks was established in 1943 by Lockheed Company to develop the first jet engine fighter. This team continued after that and successfully developed advanced airplanes. Skunkworks is now used as a pronoun of the development form of this kind. This paper introduces its organization, development form and results. Fourteen rules of Skunkworks are dealt with first. Then the developments of SR-71 supersonic reconnaissance planes and F-117 stealth fighters are described. Skunkworks has successfully developed advanced airplanes in a short time in secret. 3 refs., 2 figs.

  12. High quality new type spark plug pressure sensor; Koseino plug gata shiatsu sensor ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Urakawa, H.; Yanagihara, S.; Kawa, T. [Tsukasa Sokken Co. Ltd., Tokyo (Japan); Enomoto, Y. [Musashi Institute of Technology, Tokyo (Japan); Sato, T. [Dai Ichi Institute of Technology, Kagoshima (Japan); Gotthard, E.

    1998-05-01

    Investigations were made on a spark plug type pressure sensor using GaPO4 piezoelectric material developed recently by AVL Corporation. This sensor has the ignition electrode installed decentered to assure the installing position for the pressure sensor, where the small pressure sensor with a diameter of 4.4 mm, model GU12P is installed on the side. Experiments were performed on this sensor, a water cooled sensor for comparison, and a cooling-free type sensor for reference. The engine was operated at an outlet cooling water temperature maintained constant at 80 degC, and experimented in a normal combustion condition with full load at 2000 rpm and 4000 rpm, in a knocking condition with full load at 2000 rpm, and in a transient condition from full load at 4000 rpm to no load at 1300 rpm. As a result, it was made clear that the spark plug type pressure sensor showed an output of the same level as that with the water cooled sensor in the normal combustion pressure. Load change drift under the transient condition was found as good as 2.5% FS at maximum. No effect of columnar vibration was discovered, and a knocking waveform of 14 kHz was observed. 6 refs., 12 figs., 1 tab.

  13. Origin and development of Ashi point locating method%阿是取穴法源流论

    Institute of Scientific and Technical Information of China (English)

    张树剑

    2013-01-01

    梳理阿是穴理论源流,认为阿是穴本质上是一种取穴方法,适用于所有腧穴的定位.此法导源于《内经》,是早期的主要取穴方法,与《内经》的腧穴形态相应,通过切诊揣度以取穴.这一取穴法可以广泛适用于腧穴的临床定位,而且阿是之法亦不局限于局部压痛.《千金要方》提出阿是穴的概念,在腧穴归经的背景下,渐渐演变为与经穴、奇穴平行的类穴.这一过程造成了临床取穴方法的变异:经穴、奇穴以骨度分寸法为主取穴,阿是穴则以寻按揣穴法定位,分类之后的取穴方法渐渐背离了经典与临床实际.%The origin and development of the Ashi point theory are arranged, it is believed that the essence of Ashi point is a point locating method and it is suitable for the location of each acupoint. Originated from Neijing (Internal Classic), this method is the primary point locating method in ancient times, corresponding to the forms of acupoints in Neijing (Internal Classic), the points are located though palpation. This point locating method can be widely used to locate the points clinically, what's more, the Ashi method is not limited to use for local tenderness. Ashi point got its conception from Qianjin Yao fang (Prescriptions Worth a Thousand Gold), under the background of acupoint channel tropism, it gradually evolved to a certain kind of point that parallel to the regular point and extra point. This process changed the clinical point locating method: regular point and extra point are located according to proportional bone measurement, while Ashi point is located by palpation. However, it betrays the classic and clinical practice gradually.

  14. Waste gas treatment technology at steelmaking plants. Seitetsu setsubi ni okeru hai gas shori gijutsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, M.; Shimizu, K.; Deshimaru, K.; Watari, S. (Nihon Univ., Narashino, Chiba (Japan). Coll. of Industrial Technology)

    1992-11-30

    A variety of furnaces are employed for steelmaking. The waste gases from these furnaces are used as fuel gases or flared to the atmosphere. For the enhancement of energy efficiency at these plants and the improvement of environment, it is essential to remove the impurities contained in the waste gases, such as soot, dust, NOx and SOx with high efficiency at the lowest possible cost. In coke oven and sintering furnace, soot and dust consisting of sulphuric element, cyanogenic element and fume of alkali metals as main constituents are the subject of treatment, because these elements were contained in the raw materials. And, in blast furnace and LD converter, soot and dust are the subject of treatment because the materials have already been treated under high-temperature and the waste gases contain little chemical impurities consequently. On the other hand, in various combustion furnaces, purified by-product gases, such as the above mentioned BFG (blast furnace gas), LDG (LD converter gas) and COG (coke oven gas), etc., are used frequently and NOx generated by the high-temperature combustion is often the subject of treatment. In this report, the waste gas treatment technology developed by Nippon Steel Corporation for these various furnaces was described. 10 figs., 2 tabs.

  15. Trends in developing alternative energies in Sweden. Sweden ni okeru daitai energy kaihatsu no doko ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Maruyama, S. (The Kansai Electric Power Co. Inc., Osaka (Japan))

    1992-07-10

    This paper introduces a summary of the survey made on the Swedish policies on alternative energies. The country has a characteristic that the alternative energy policies have a great importance for each political party as its reigning strategy. The largest weight for the alternative energies is placed on bioenergies. Sweden has been already depending on bioenergies at 15% of the country[prime]s total energy supply. Nearly half amount of the budget in the new five-year alternative energy plan approved in 1991 is bioenergy related. The budget of 3.76 billion kronor can be broken down into 1 billion kronor for effective energy utilization, 1.92 billion kronor for bio-fuel utilization, and 800 million kronor for bio-fuel utilizing plants. The bio-fuel utilizing plants include improved CFB utilizing steam cycle power generation, gasified compound cycle power generation, a bio-fuel/natural gas compounding plan, and a bio-fuel/caustics recovery boiler compounding plan, each having merits and demerits. Thirty-five wind power generating plants are in operation producing a total power of about 10,000 MWh in 1990. 3 figs., 4 tabs.

  16. High-accuracy measurement of ship velocities by DGPS; DGPS ni yoru sensoku keisoku no koseidoka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Yamaguchi, S.; Koterayama, W. [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics

    1996-04-10

    The differential global positioning system (DGPS) can eliminate most of errors in ship velocity measurement by GPS positioning alone. Through two rounds of marine observations by towing an observation robot in summer 1995, the authors attempted high-accuracy measurement of ship velocities by DGPS, and also carried out both positioning by GPS alone and measurement using the bottom track of ADCP (acoustic Doppler current profiler). In this paper, the results obtained by these measurement methods were examined through comparison among them, and the accuracy of the measured ship velocities was considered. In DGPS measurement, both translocation method and interference positioning method were used. ADCP mounted on the observation robot allowed measurement of the velocity of current meter itself by its bottom track in shallow sea areas less than 350m. As the result of these marine observations, it was confirmed that the accuracy equivalent to that of direct measurement by bottom track is possible to be obtained by DGPS. 3 refs., 5 figs., 1 tab.

  17. On noise, traffic and factory vibrations in Akita city; Akitashi ni okeru soon oyobi kotsu kojo shindo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Nogoshi, M.; Kikuchi, T.; Morino, T.; Sannohe, M. [Akita University, Akita (Japan). College of Education

    1996-05-01

    Noise and vibration were measured in Akita City. In 1994, noise and traffic-caused vibration were measured along the trunk lines and other roads across the entire Akita City area. In 1995, the effort centered on the Ibarashima manufacturing quarters, the important source of noise and vibration in Akita city. The general-purpose noise meter LA-220S was used to measure noise and the vibration level meter VR-5100 was used to measure vibration. The results of noise measurement carried out at 122 points in Akita City indicated that the noise level was high along Route 7, Route 13, and the southern line belonging to the newly built national highway, marking the highest of approximately 74dB. As compared with the measurement made in 1968, the value was higher by 3-13dB. A roughly similar trend was seen in vibration. The noise level measurement of 1995 accomplished at 100 points in the vicinity of Ibarashima district indicated that the factories were responsible for high levels of noise and vibration. It was found that the levels lowered in proportion to the increase in the distance from the factories. 11 figs., 1 tab.

  18. Flat plate approximation in the three-dimensional slamming; Heiban kinji ni yoru sanjigen suimen shogeki keisanho ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Toyama, Y. [Mitsui Engineering and Shipbuilding Co. Ltd., Tokyo (Japan)

    1996-12-31

    A slamming load generated by interactive motions between a ship body and water face is an important load in ensuring safety of the ship. A flat plate approximation developed by Wagner is used as a two-dimensional slamming theory, but it has a drawback in handling edges of a flat plate. Therefore, an attempt was made to expand the two-dimensional Wagner`s theory to three dimensions. This paper first shows a method to calculate water face slamming of an arbitrary axisymmetric body by using circular plate approximation. The paper then proposes a method to calculate slamming pressure distribution and slamming force for the case when shape of the water contacting surface may be approximated by an elliptic shape. Expansion to the three dimensions made clear to some extent the characteristics of the three-dimensional slamming. In the case of two dimensions or a circular column for example, the water contacting area increases rapidly in the initial stage generating large slamming force. However, in the case of three dimensions, since the water contacting area expands longitudinally and laterally, the slamming force tends to increase gradually. Maximum slamming pressure was found proportional to square of moving velocity in a water contacting boundary in the case of three dimensions, and similar to stagnation pressure on a gliding plate. 12 refs., 17 figs., 1 tab.

  19. Measurement of organic carbon quantity at chemoautorophic bacterium; Kagaku dokuritsu eiyo saikin ni okeru yuki tansoryo no sokutei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tsuda, I.; Kato, K.; Nozaki, K. [Electrotechnical Laboratory, Tsukuba (Japan); Kurokawa, K. [Tokyo University of Agriculture and Technology, Tokyo (Japan)

    1996-10-27

    Described herein is the method for analyzing quantity of organic carbon synthesized by chemoautotrophic bacterium. It is based on the combustion-infrared spectroscopy, which is normally adopted for quantitative analysis of organic carbon. The problems involved in the measurement of organic compounds synthesized by iron-oxidizing bacteria are noise by culture medium components, aging of gas analyzer and contamination with organic compounds from a silicon plug. The measures taken in this study against these problems include comparison of the results with a medium containing iron-oxidizing bacteria with those with a medium free of these bacteria, calibration with the standard solution for each measurement, and replacement of a silicone plug by a silicon cap. Organic carbon is measured by a TOC-5000 analyzer equipped with an automatic sample feeder ASI-5000. Biomass density is determined by the MPN method. It is confirmed that organic carbon quantity is almost in proportion to biomass density, a phenomenon which can be used to determine organic carbon quantity. 7 refs., 6 figs., 1 tab.

  20. Deep needling Ashi point treatment of lumbar disc herniation%深刺阿是穴治疗腰椎间盘突出症

    Institute of Scientific and Technical Information of China (English)

    秦莉芳; 王小宁; 李文杰; 李霞; 王丽娜

    2015-01-01

    目的:观察深刺阿是穴治疗腰椎间盘突出症的临床疗效。方法将60例腰椎间盘突出症患者按随机对照试验方法分为2组。阿是穴组腰部取督脉、椎旁、足太阳膀胱经阿是穴深刺并配合患侧下肢辨经取穴。夹脊穴组腰部取双侧腰夹脊穴及患侧承山、阳陵泉、环跳、秩边。采用改良的日本骨科学会下腰痛评分系统及视觉模拟评分法分别观察。结果阿是穴组总有效率96.7%,夹脊穴组总有效率86.7%,2组比较差异有统计学意义( P<0.01),阿是穴组临床疗效优于夹脊穴组。结论深刺腰部阿是穴可以在局部形成较大的有效刺激量,配合患侧下肢辨经取穴治疗腰椎间盘突出症疗效确切。%Objective To observe the clinical efficacy of deep needling Ashi point treatment of Lumbar disc herniation (LDH) .Methods The 60 cases of LDH were randomly divided into 2 groups .Ashi group waist take Du meridian ,paraver-tebral ,bladder meridian Ashi point deep needling ,combined with selecting the acupoint by identifying meridian on sick lower extremity .The Jiaji group take bilateral lumbar Jiaji and affected side Chengshan ,Yanglingquan ,Huantiao ,Zhibian .Using the modified Japanese Orthopedic Association low lumbar pain score and Visual analogue score observe respectively .Results Ashi group the total efficiency 96 .7% ,Jiaji group the total effectiveness 86 .7% .Two groups'difference was statistically significant ( P<0 .01 ) .Ashi group clinical curative effect is better than Jiaji group .Conclusion Deep needling the waist Ashi point can form larger effective stimulating quantity in local .Deep needling the waist Ashi point treatment LDH has ob-vious curative effect ,combined with selecting the acupoint by identifying meridian on sick lower extremity .

  1. Ashis Nandy e as vicissitudes do self: crítica, subjetividade e civilização indiana

    Directory of Open Access Journals (Sweden)

    José Maurício Domingues

    2010-04-01

    Full Text Available Este texto trata da obra de Ashis Nandy, um dos principais intelectuais indianos contemporâneos, psicólogo social, psicanalista, bem como cientista político, que busca desenvolver o que chamou de "tradicionalismo crítico". Sua discussão da personalidade e do indivíduo, dentro de uma concepção ampla da civilização da Índia, com a modernidade fazendo-se presente como ameaça explícita (e elemento implícito, mais ambiguamente, é crucial em vários sentidos - em particular teoricamente - para o entendimento da Índia e para uma teoria da civilização. A composição múltipla do self e suas relações tanto com a cultura índica quanto com a ocidental se destacam em sua discussão.This paper examines the work of Ashis Nandy, one of Indian's foremost contemporary intellectuals, a social psychologist, psychoanalyst and political scientist, responsible for developing what he calls a ‘critical traditionalism.' Adopting a broad conception of Indian civilization in which modernity poses an explicit threat (and, more ambiguously, an implicit element, Nandy's discussion of personality and the individual is crucial at various levels - in particular theoretical - to understanding India and developing a theory of civilization. One of the prominent features of his discussion is the multiple composition of the self and its relations to both Indian and Western civilizations.

  2. 浅述阿是穴的源流及临床应用%The Origin of Ashi Points and Its Clinical Application

    Institute of Scientific and Technical Information of China (English)

    郭健; 李岩

    2011-01-01

    目的:总结阿是穴的源流、现代研究及临床应用等,以期对临床使用起到一定的指导作用.方法:结合文献和临床观察总结.结果:阿是穴在临床应用渊源久远,寻找方便,治疗效果较好.结论:阿是穴可弥补经穴之不足,在临床有重要价值,并有很大的应用空间.%Objective: To summarize the origin and the modem research about Ashi points and their reactive mechanism and the clinical applications in order to play a guiding role.Methods:The paper is based on literatures and clinical observations.Results:The usage of the Ashi points is long and convenient, and it has a good effect.Conclusion:Ashi points can make up for the lack of the meridians, and they have important values and greatly space in the clinical application.

  3. 反阿是穴与阿是穴治疗肱骨外上髁炎疗效比较%Comparative study on therapeutic effect of Ashi-points and anti-Ashi-points on external humeral epicondylitis

    Institute of Scientific and Technical Information of China (English)

    王欣

    2011-01-01

    目的:观察反阿是穴与阿是穴治疗肱骨外上髁炎的临床疗效差异.方法:将68例患者随机分为反阿是穴组和阿是穴组,每组34例.反阿是穴组在按压后使局部疼痛缓解或消失处选取穴,阿是穴组在痛点取穴,并于周边围刺三针.隔天治疗1次,10次为一疗程,均治疗2个疗程,分别在疗程结束后当天、第7天、第30天、第6个月及1年后观察疗效.结果:治疗后当天反阿是穴组有效率为100.0%(34/34),阿是穴组有效率73.5%(25/34),两组比较差异有统计学意义(P<0.01),第7天和第30天反阿是穴组有效率分别是94.1%(32/34)、91.2%(31/34),优于阿是穴组的70.6%(24/34)、67.6%(23/34)(均P<0.01),第6个月和1年后反阿是穴组有效率分别为73.5%(25/34)、52.9%(18/34),阿是穴组有效率分别为64.7%(22/34)、61.8%(21/34),组间差异无统计学意义(均P>0.05).结论:反阿是穴治疗肱骨外上髁炎具有明显的近期效应,反阿是穴与阿是穴具有相似的远期疗效.%Objective To compare the clinical efficacy between Ashi-points and anti-As/iz-points for external humeral epicondylitis. Methods Sixty-eight cases were randomly devided into an anti-As/ti-points group( group A) and an As/ii-points group(group B), 34 cases in each group. In the group A, anti-Asfti-points(points of pain relief or disappearance after local press) were selected for acupunctures in the group B, Ashi-points (pain spots) were selected for acupuncture and surrounded needling therapy was added . Once other day, 10 treatments made one session, altogether 2 courses. The clinical effects were observed at the ending day, the 7 th day, the 30 th day, the 6 th months and one year after treatment. Results The effective rates at the ending day, the 7 th day, the 30 th day after treatment in the group A were 100. 0% (34/34), 94.1% (32/34) and 91. 2% (31/34) , which were superior to those of 73. 5% (25/34), 70. 6% (24/34), 67. 6% (23/34) respectively

  4. Glimpse of Views in Ashi and Myofascial Trigger Point%阿是穴与激痛点浅议

    Institute of Scientific and Technical Information of China (English)

    王列; 马铁明; 曹锐; 王颖; 马帅; 王建华; 王莹; 陈玲

    2016-01-01

    阿是穴与激痛点虽于不同时代提出,但二者之间有诸多相似之处,本文从二者的起源、定位、病理机制、临床应用及干预方法等多方面进行分析阐述,揭示二者之间的联系与区别,希望从一个全新的视角出发,对二者的理论及实践的发展提供借鉴.%Ashi and myofascial trigger point,although proposed at different times,but there are many similarities between them,due to its unique efficacy and widespread concern in Western medical community.From the origin,location,pathological mechanisms,clinical application and intervention aspects of both methods were analyzed and discussed,reveals links and differences between them.We hope from a new perspective on the development of both the theory and practice for reference.

  5. Feasibility of hydrogen production from seaweeds by fermentation; Kaiso wo kishitsu ni riyoshita hakoho ni yoru suiso seisan no kanosei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tanisho, Shigeharu; Suganuma, Takeshi [Yokohama National University, Kanagawa (Japan)

    1999-06-01

    To use kelps as a substrate for fermentative hydrogen production by Enterobacter aerogenes strain E.82005, hydrogen evolution rates and yields from mannitol were measured under various salt-concentration cultures. Under non-salt condition, they were 13 mmol per litter culture per hour and 1.6 mol H{sub 2} per mol mannitol, as compared with these, under salt condition 1%, 2%, and 3%, they were 9.9 and 1.5, 4.3 and 1.2, and 3.0 and 0.9, respectively. From these results, we concluded that the production of hydrogen is suitable under non-salt condition, but lower salt condition than seawater especially around 1% is allowable for practical production of hydrogen. The higher yield of H{sub 2} from mannitol than from glucose was clearly shown from the mass balance between evolved H{sub 2} and calculated H2 from metabolite. (author)

  6. For diffusion of environment-friendly products. Environment-friendly shopping campaign; Kankyo ni yasashii shohin no fukyu wo mezashite. Kankyo ni yasashii kaimono undo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kitano, M.

    1996-05-05

    This paper presents the activity of a consumers` organization in Hyogo-ken for diffusion of environment-friendly products. The product evaluation committee lists the concept of such products as follows: less consumption of resources and energy, possible cyclic reuses, reasonable and appropriate package, and less refuse and possible reuse as resource. This committee determines the products to be recommended, based on selection of products and producers, questionnaire answers, and survey results by consumer monitors and specialist group. The current number of recommended products is 24 in group or 312 in brand, and a half of such products are composed of recycled paper, aluminum and plastic products. The recommended products are renewed every two years. Although the recommended products have steadily increased during the activity for 5 years, the kinds of products are insufficient because of high price, less kinds of products, and insufficient PR. Education, wide information supply (symbol mark), and promotion activity for purchase (joint purchase, model shop) are important in the future. 1 fig., 1 tab.

  7. Wave-free floating body forms for a shallow sea area; Senkaiiki no naminashi futai keijo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kyozuka, Y.; Nariai, Y. [Kyushu University, Fukuoka (Japan)

    1997-10-01

    In column footing or semi-submergible type marine structures, a vertical wave force vanishes at a specific period of waves. This phenomenon is called wave-free characteristics. This wave-free characteristics make it possible to design marine structures superior in oscillation performance in waves. Since Bessho`s wave-free theory is useful only for an infinite water depth, this paper studied the wave-free theory for a shallow sea area. On a wave-free singularity and required floating body form, 2-D and 3-D axisymmetric floating body forms were determined, and vertical wave force characteristics of the obtained body forms were calculated and verified experimentally. Since the source term of the wave-free singularity was weaker in a shallow sea area than an infinite deep water area, resulting in the narrow width of the obtained wave-free body forms in a shallow sea area. The wave-free theory for a shallow sea area was verified by both numerical calculation based on a singularity distribution method and model experiment for these floating body forms. 3 refs., 10 figs.

  8. Completion of petroleum reserve base in the eastern part of Tomakomai. Tomakomai tobu sekiyu bichiku kichi zenmen kansei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    1991-02-01

    The construction of a petroleum reserve base in the eastern part of Tomakomai (called Tomakomai Base hereafter) was started in 1981 as a part of the national petroleum reserve business, and the base of 2.74 million{sup 2} was completed in November 1990. This report introduces the whole aspect of the base; from the selection of its location to the construction processes and the facilities. The Tomakomai Base is a corporation capitalized at 10 billion yen and main stock holders of the corporation are the Japan National Oil Corporation and petroleum corporations. After some modifications during construction, 57 tanks (114.8 thousand kl {times} 55 tanks, and 42.7 thousand kl {times} 2 tanks) of 6,400 thousand kl capacity were completed. The base is conveniently located on the coast 20km from the Chitose Airport. The climate here is comparatively warm for Hokkaido, and it snows little. The construction work went on smoothly with the unstinted cooperation of local organizations, one city and three towns. With the consolidation of the life environment and the work environment of the workers there, a continuous 1200 hour record of no accidents was attained. 5 figs., 2 tabs.

  9. On the purifying chamber which makes organic substance into the bio gasification; Yukibutsu wo baiogasuka suru jokaso ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tanba, Fumio [Nagoya University, Aichi (Japan); Oseki, Hiroaki; Sakurai, Yoshimasa

    1999-03-31

    The total energy which the mankind uses is taken in as an energy for being effective by eating agricultural products got through the photosynthesis called 1/15000 of solar energy which falls on the earth, and the process must be to use this solar energy which produces excretory substance by collecting. It will be important that this process does not put on the failure in the earth either and that it closes it as possible keeping system. Various excreted organic substances are contained in the source excreted, and it can be simply made bio gasification they all and the maintenance also describe the easy purifying chamber. (NEDO)

  10. Wave attenuation around a large pontoon-type floating structure; Pontoon gata choogata futai shui no haro gensui ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kagemoto, H.; Fujino, M.; Ishii, H.; Yamashita, T. [The University of Tokyo, Tokyo (Japan)

    1996-10-01

    With an objective to identify actual conditions of wave attenuation at the bottom of an ultra-large floating structure, a model of a large pontoon-type floating structure was used to measure and discuss wave varying pressure distribution at the bottom of the floating structure subjected to regular waves. The experiment used a pontoon-type model having a length of 6.00 m and a depth of 1.20 m. A pressure sensor was embedded at the bottom of the floating body to measure the wave varying pressure. The experiment was performed in regular waves with wave amplitude kept constant nearly at 1.0 cm, and the wave cycle was changed between 0.475 and 1.000 sec. Angle of encounter with wave was set to four values of 0 degrees, 10 degrees, 45 degrees and 90 degrees. As a result of the experiment, it was verified that the wave varying pressure underneath the floating body agrees well with the linearity potential theoretical value, and the wave varying pressure attenuates to nearly zero inside the floating body from its end above waves to about one wave length. In addition, the pressure distribution in a direction perpendicular to waves was found nearly constant excepting the edges of the floating body. 3 refs., 7 figs.

  11. Discharge coefficient of poppet intake valve with rotating flow. Senkai kuki wo tomonau popetto kyukiben no ryuryo keisu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tanabe, S.; Kashiwada, Y.; Waka, R. (Tottori Univ., Tottori (Japan). Faculty of Engineering); Liu, Guobang (Okayama Univ., Okayama (Japan). Graduate School)

    1994-04-25

    In recent years, there are many cases of usage of the intake system aiming at formation of swirls because of the demand for improvement of combustion of internal combustion engines. This study has the objective to examine experimentally the effect of the rotating strength on the discharge coefficient of an intake valve in the stationary flow by changing the strength of intake rotation around the valve axis in case when the air is running into the cylinder while rotating around the intake valve axis. The information obtained as a result is as follows; at a part where the valve head is small, the effect of the rotation in the upper flow of the valve on the discharge coefficient is small, but as the valve head becomes bigger, the effect of rotation increases, and as the rotation is stronger, the flow coefficient becomes less. In case when the valve head angle is 0[degree], the discharge coefficient at the low valve head becomes bigger than the case when the valve head angle is 20[degree]. Concerning the discharge coefficient obtained from the difference between the pressure in the cylinder and the atmospheric pressure, in case when the valve head is small, the discharge coefficient becomes big since the theoretical air capacity is estimated less due to the pressure recovery. 7 refs., 13 figs.

  12. Prediction of strong acceleration motion depended on focal mechanism; Shingen mechanism wo koryoshita jishindo yosoku ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kaneda, Y.; Ejiri, J. [Obayashi Corp., Tokyo (Japan)

    1996-10-01

    This paper describes simulation results of strong acceleration motion with varying uncertain fault parameters mainly for a fault model of Hyogo-ken Nanbu earthquake. For the analysis, based on the fault parameters, the strong acceleration motion was simulated using the radiation patterns and the breaking time difference of composite faults as parameters. A statistic waveform composition method was used for the simulation. For the theoretical radiation patterns, directivity was emphasized which depended on the strike of faults, and the maximum acceleration was more than 220 gal. While, for the homogeneous radiation patterns, the maximum accelerations were isotopically distributed around the fault as a center. For variations in the maximum acceleration and the predominant frequency due to the breaking time difference of three faults, the response spectral value of maximum/minimum was about 1.7 times. From the viewpoint of seismic disaster prevention, underground structures including potential faults and non-arranging properties can be grasped using this simulation. Significance of the prediction of strong acceleration motion was also provided through this simulation using uncertain factors, such as breaking time of composite faults, as parameters. 4 refs., 4 figs., 1 tab.

  13. Load leveling efforts of The Hokkaido Electric Power Co. Inc.; Hokkaido Denryoku no fuka heijunka eno torikumi ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    The Hokkaido Electric Power Co., Inc., aiming to enhance power generation efficiency through power load levelling, strives to expand and substantiate its electricity billing menu and to popularize and encourage the use of levelling-oriented apparatuses and systems most of which are designed for utilizing midnight power. The billing menu has in it a snow-melting power which is cut off for load levelling during the peak demand time zone. For domestic use, a time zone-specified lighting system named Dream Eight is created, which is one of the billing systems dependent upon time zone. Introduced therein for industrial use is a demand/supply adjustment contract system. Furthermore, in compliance with the amended Electricity Business Law that came into force in 1995, efforts are under way for revising the period wherein power is to be supplied for melting snow, expanding the scope of application of the power supply system dependent upon time zone, and newly introducing a heat accumulation assisted peak adjustment contract system and an operation adjustment contract system. As for business efforts in relation to load levelling, the company proposes household electrical systems centering about 200V high-efficiency apparatuses, electric water warmer contributing to the enhancement of year-round load levelling, popularization and reinforcement of electric snow melting systems, and power utilizing technologies capable of meeting local demands raised for example by agriculture and fishery.

  14. Efforts of load leveling in Tohoku Electric Power Co. Inc.; Tohoku denryoku no fuka heijunka eno torikumi ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    This paper describes efforts of load leveling in Tohoku Electric Power Co., Inc. from the viewpoint of the rate system and business development. For the approach from the rate system, various rate menus for the peak shift have been arranged for domestic and large industry customers. To create the midnight demand, spread and expansion of electric hot water service are promoted. Consequently, the contract of midnight power has reached 914,000 kW at the end of 1995, which was 774,000 kW in 1985. To spread the ice regenerative air conditioning systems, the grant of incentive to the manufacturers and special discount of electricity rate have been conducted. These systems have been introduced in the eight places of Tohoku Electric Power`s business. The spread incident system has been created to introduce the automatic vending machines for beverages with the power peak cut function. Unused energy, such as exhaust heat from the non-treated sewage water and substations has been utilized as a heat supply project for city redevelopment. Multi-functional heat pump with regenerative function has been developed. This system aims at the peak shift by combining multi-functional heat pump and electric hot water service. 2 figs., 2 tabs.

  15. Approach undertaken by our Company for leveling electric loads; Chubu Denryoku Kabushi Kaisha no fuka heijunka eno torikumi ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    Measures for leveling the electric loads relying upon two facets - tariff system and business activities - in Chubu Electric Power Co., Inc. are presented. Firstly, the existing pricing systems for midnight electric power and electric light according to the period of time for the household as well as those of seasonal and time zone electric power, modifiable contract with the time zone and so forth for large industry users, together with a similar contract for the owner of regenerating installation are outlined. In addition, a price reduction system is indicated in favor of a scheduled shutdown of large industry operations as a means of avoiding electric consumption during weekdays in summer and between 13h and 16h when large demands exist. Further, a selective contract system put in service in 1995 and the price reduction for ice regenerating air conditioning system are cited. As for business facet, 1995 is regarded as the first year of the ice regenerator for its generalization through exhibition and promotive campaign to the foods processing industry, and the application of the latent heat regenerative system to perishable foods is recommended. Moreover, installation of energy saving type automatic vending machine, so-called eco-vendor is encouraged for its merit of peak-cut and energy price lowering. Lastly, activities to extend the use of electric calorifiers and the regenerative floor heating are mentioned. 2 figs., 1 tab.

  16. Effective use of active solar system on a residence; Jutakuyo taiyo enerugi akuteibu yuko riyo hoshiki ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kamiya, Y. [Kanto Gakuin University, Yokohama (Japan)

    1999-11-25

    In this paper, reduction of primary energy consumed in a residence was calculated for the application of combination and hybrid systems of thermal solar energy and photovoltaic generation. The relation between the cost of each system and reduced energy was investigated. A combination system is more effective than a hybrid system for a residence in cost bases. At present time, the system of which area of panel less than 20 % of the floor area should be a solar system because of high cost of a PV system. And this percentage goes down to 5 % when the cost of PV system down to that of solar system in panel area bases. For a system larger than this, adding PV panel to a solar system, a combination system should be formed. (author)

  17. Roof control methods at long-wall faces in Ikeshima colliery; Ikeshima tanko no highchair ni tsuite (tokuni tenban iji)

    Energy Technology Data Exchange (ETDEWEB)

    Nomura, T. [Matsushima Coal Mining Co. Ltd., Fukuoka (Japan)

    1997-10-25

    This paper describes the working face management at the Ikeshima Coal Mine. For the working face management, gobs are fallen by seating up the self-advancing frames so as to sift the trough and self-advancing frames, smoothly. Then, roof condition at the face is maintained in a proper state by filling the gobs. Necessary conditions are straight working face, seating up of self-advancing frames, insurance of proper working height, and replacement of damaged parts. Unless the working face is modified to make a straight face, it causes a competition of self-advancing frames. Wall adjustment should be carried out by determining the proper roof position, to ensure the proper working height. For the filling of fallen gobs, it is not sufficient only to support the roof by the self-advancing frames, but also to destroy the roof by seating up them and push up the roof. In this meaning, the self-advancing frame is not a supporting machine, but a machine for destroying the roof. Although the working face management depends on the natural conditions, it is necessary to make an effort to manage the working face every day steadily under the given conditions. At the face, the support of the front roof is apt to be considered. However, essential working face management is the support of gobs. 3 refs., 1 fig.

  18. JIS B 9921 (light scattering automatic counter). JIS B 9921 (hikari sanranshiki jido ryushi keisuki) ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, S. (Japan Air Cleaning Association, Tokyo (Japan))

    1990-07-01

    JIS B 9921 (Light scattering automatic counter) enacted in 1976 was revised in November 1989. With the improvement of air cleaning technologies such as clean room, the measurement of airborne particles has become more important. The most convenient and precise measuring instrument is a light scattering particle counter. However there was an error in accuracy between each counter and there were some problems about reliability of its measured values. This was because its calibration method had not been established. Under the circumstances, the sub-micron particle measuring and removing committee was formed in Japan Air Cleaning Association in order to study general rules of calibration, and the results of the study were standardized as Japan Air Cleaning Association Standard, JACA NO. 18 (General rules of calibration for light scattering automatic particle counter). The purpose of the revision this time is to improve the reliability by adopting the above standard. 12 figs., 1 tab.

  19. On the building of Momoyama hydraulic power station on Kiso river. Kisogawa Momoyama suiryoku hatsudensho no kenchiku ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kotera, T. (Nagoya University, Nagoya (Japan). Faculty of Engineering)

    1991-09-30

    This paper investigates Momoyama hydraulic power station built on the middle reaches of the Kiso River in Uematsu-cho, Kiso-gun, Nagano Prefecture in Japan, in 1923 by relating to the feature of the building of the hydraulic power station and the architect, Shiro Sato. The hydraulic power station originally was a functional and industrial building which puts a priority on the efficiency of business economy, at the same time it was often required to present a beautiful appearance. The building of Momoyama hydraulic power station was founded on the crane girder structure covered with reinforced concrete(RC) walls. A Hat roof of RC slab was applied to the roof of the building. It was generally designed in Neo-Gothic style. More specifically, however, the wall surface was designed in church style and the upper part was like a castle in the middle ages. Therefore the total design was eclectic. The outer surfaces of the building were remained to be bare concrete as cast. Such a multiple building symbolizes the situation of Japanes architecture in the 1920s. 4 figs.

  20. Properties of 36-year-old prestressed concrete beams; 36 nenkan kyoyosareta PC ko no seijo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kano, S.; Suda, T. [Orientaru Construction Co. Ltd., Tokyo (Japan); Shimizu, Y.; Yahata, T.

    1996-01-30

    In this report, the result of examinations such as comparison of measured values with those of calculated and so forth are described on the properties of a main beam taken out from `Teiseki Bridge` - structure composed of PC single T-beams constructed in 1957 - at the time of its removal. For the main beam of 20.8m long with a span of 20.2m, crack and deflection were measured during a bending test until fracture occurred under a static load of 55.96tf. Then, compressive and tensile strengths, elastic modulus and so forth were measured on core specimens together with estimation of their mix composition for the concrete materials. Further, a material test was conducted on PC steel wires of 5mm in diameter, and the states of grout filling and appearance of rust were observed, followed by the examination of their mechanical properties such as yield and tensile strengths, elastic modulus and so on. It was revealed from findings of the test that the beam remained perfect as its surface was smooth and free from crack as well as steel wires without degradation caused by rust in spite of its long service in addition to the disaster of the Niigata Earthquake. 1 ref., 9 figs., 8 tabs.

  1. Rational design and construction of temporary steel tower bases; Karitetto kiso sekkei seko no gorika ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Ikemoto, M. [Kansai Electric Power Co. Inc., Osaka (Japan)

    2000-01-10

    Current design and construction of temporary steel tower bases are equivalent to those for permanent facilities, and removal of the whole base concrete requires a great deal of labor and cost. The newly developed rational liner plate type base uses no concrete, and uses liner plates in place of adhesive and frictional parts of previous base floor plates. The workability of back-filling using sandbags is very excellent. Use of improved soil material as back-filling mortar of liner plates shows a favorable separability. The whole base is reusable because of no damage of each component member. Unlike concrete bases, the liner plate base produces no waste materials due to removal. The steel-base anchor type base can reduce both excavating and back-filling soil by using earth anchors, and reduce excavating soil as much as possible by allotting lifting force to each earth anchor. Reduction of both excavating and back-filling soil makes the removing work of bases simple. Cost reduction of 30-40% was attained by each newly developed base as compared with costs of conventional bases. (NEDO)

  2. Geological evaluation on productibility of coal seam gas; Coal seam gas no chishitsugakuteki shigen hyoka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, K. [University of Shizuoka, Shizuoka (Japan). Faculty of Education

    1996-09-01

    Coal seam gas is also called coal bed methane gas, indicating the gas existing in coal beds. The gas is distinguished from the oil field based gas, and also called non-conventional type gas. Its confirmed reserve is estimated to be 24 trillion m {sup 3}, with the trend of its development seen worldwide as utilization of unused resource. For the necessity of cultivating relevant technologies in Japan, this paper considers processes of production, movement, stockpiling, and accumulation of the gas. Its productibility is controlled by thickness of a coal bed, degree of coalification, gas content, permeability, groundwater flow, and deposition structure. Gas generation potential is evaluated by existing conditions of coal and degree of coalification, and methane production by biological origin and thermal origin. Economically viable methane gas is mainly of the latter origin. Evaluating gas reserve potential requires identification of the whole mechanism of adsorption, accumulation and movement of methane gas. The gas is expected of effect on environmental aspects in addition to availability as utilization of unused energy. 5 figs.

  3. On practicality of a hybrid car with solar cells; Taiyo denchi wo tosaishita hybrid car no jitsuyosei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, K.; Nagayoshi, H.; Kamisako, K. [Tokyo University of Agriculture and Technology, Tokyo (Japan)

    1997-11-25

    The paper stated a development of a hybrid car which is a parallel type with gasoline engine and electric motor as driving source (connecting each according to the situation) and is also equipped with solar cells. Specifications are gasoline engine of 1200cc, induction motor of 5.5kW, lead battery of 288V and 7.2kWh, monocrystal silicon solar cells of 180W maximum output, and body weight of 1100kg. The rear wheel is driven by electric motor, and the front wheel by gasoline engine. The car is loaded with battery charge use solar cells on hood and roof. To enhance cleaning degree, 1.6kW solar cells are installed as an installed power system and used for battery charge. Even by an electric motor with output less than that of the usual electric car, harmful exhaust gas emitted in start-up can be controlled. This is because the electric motor can be used in accelerating. It was confirmed that the power required for it could be supplied by solar cells installed on the car. The hybrid car is practically useful for prevention of local air pollution. 5 refs., 4 figs., 2 tabs.

  4. Proposal on an automatic ship shell member arranging system; Sengai buzai jido seiri system no teian ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Yoshitomi, T.; Azumi, N. [Kyushu Kyoritsu University, Fukuoka (Japan)

    1996-04-10

    Based on an investigation on the current status of member sorting and on analysis on restrictions to automation of the ship shell process, this paper describes a basic plan for a system to automate sorting works for members. The system is intended for power saving in new fields, improvement in safety and hygiene, and prevention of errors in member sorting. The automation is intended on small bones that are large in number and tend to cause errors in sorting. The area of an elbow plate of 2,000 mm {times} 800 mm thought to be small bones of the largest class is 0.80 m{sup 2}, and the weight of the small bones is made almost constant at 80 kgf. Therefore, a robot working as a major component is selected from models that have a capability of carrying a weight of 100 kgf and are capable of numerical control. A robot body is mounted on a moving trolley to sort out members cut out from steel sheets. Because the data to operate the robot can be created automatically from the data base, sorting errors due to human mistakes decrease. Amount of the member finding and handling works also decrease in the assembly process. 4 figs.

  5. On the relationship between the irregular reflector and the data processing by stacking; Hanshamen keijo to jugo shori ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Matsushima, J.; Yokota, T.; Miyazaki, T. [Geological Survey of Japan, Tsukuba (Japan); Rokukawa, S. [The University of Tokyo, Tokyo (Japan). Faculty of Engineering

    1996-05-01

    An examination was made on the possibility of data processing by stacking with scattered waves assumed in a seismic exploration analysis (diffraction stacking method). In the examination, a CDP stacking method and the diffraction stacking method were compared through numerical experiments in the case of imaging a flat reflection surface and an irregular reflection surface. As a result, it was revealed that the CDP stacking method for stacking mirror reflection waves was merely a processing to raise S/N ratio while the diffraction stacking method for stacking with scattered waves assumed contained a migrational aspect as well as an aspect to raise S/N ratio. Consequently, it was shown that, if an oscillator was properly arranged, a structural imaging was possible not by the shape of a reflection surface but by the diffraction stacking method. Additionally, the diffraction stacking method revealed that the imaging effect varied by frequency with the stacking effect decreased at high frequencies, and that no stacking effect decreased at low frequencies but resolution lowered in horizontal direction. 4 refs., 8 figs.

  6. Stability criterion for cryocooler-cooled HTS coils; Reitoki dendo reikyaku koon chodendo koiru no anteisei hyoka kijun ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Ishiyama, A.; Shimizu, S.; Asai, H. [Waseda Univ., Tokyo (Japan)

    1999-11-10

    In the refrigerating machine conduction cooling LTS coil, the design based on 'the critical current marging stabilization' is mainly carried out the coil as stability criterion for evaluation, since it becomes an operation in non-refrigerant. Here, the consideration was tried on stability evaluation of the refrigerating machine conduction cooling HTS coil in which the development is advancing recently. (NEDO)

  7. Application of a kinematic GPS to ship maneuvering trials; Soju seino shiken eno kinematic GPS no riyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Hirata, N.; Kose, K.; Takase, S.; Ito, R. [Hiroshima University, Hiroshima (Japan). Faculty of Engineering; Nakamura, Y.; Terada, K.

    1997-09-04

    There has been a great progress in position measurement capability of well-known Global Positioning Systems (GPS) and the accuracy has been remarkably improved in the cm order, especially in a kinematic GPS (KGPS) which is based on the phase identification of GPS carrier waves. For the KGPS, interference measurement type differential GPS (DGPS) can be applied to moving ship. Accuracy of the KGPS has been examined. The sea trials of the coastal cargo ship have been conducted for grasping the performance improvement during trials by means of the KGPS. High accuracy in the measurements was evaluated about 2 cm horizontally and 5 cm vertically. The accuracy was occasionally degraded by the cycle slip generated with multi-pass and radio cutout. It is required to consider the setting position of antennas. Although the KGPS can determine the position in remarkably high accuracy, the direction can not be determined from a single measurement. It is required to determine the angle by combining the measurements. From the measurements during ship maneuvering trials using the KGPS, it was found that information required for evaluating the maneuvering performance, such as longitudinal and lateral velocities, turning angle velocity, and yawing angle, can be accurately determined. 5 refs., 8 figs., 5 tabs.

  8. Kurokawa 150-kW wind turbine generator demonstration; 150 kW Kurokawa furyoku hatsudensho ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Okamoto, M.; Shinohara, M.; Sugiyama, T. [Kansai Electric Power Co. Inc., Osaka (Japan)

    1996-10-27

    This paper presents the 150kW wind turbine generator erected at a site near Kurokawa dam lake of Kansai Electric Power Co. in Hyogo prefecture. This generator is composed of a horizontal-axis propeller with 3 blades of 27m in diameter and 36/27rpm, and a tower of 30m high. Harmony with the environment was also considered because of the site in a natural park area. Its demonstration test started in Oct. 1996 at annual mean wind velocity of 2m/s. Soft start was realized by controlling inrush current and preventing voltage drop in system interconnection by use of a thyristor circuit. The dual operation system was adopted of a 30kW small generator at lower wind velocity and a 150kW large one at higher velocity. Two kinds of brakes are used, and rotor revolution was reduced by air brake (blade tip spoiler). Mechanical disk brake works for the stopped rotor or emergency stopping. Even if the wind turbine was stopped by exterior factor, if no anomaly of the turbine is found, it automatically re-starts after removal of the factor. The generator is controlled from a remote control station 150km apart through NTT communication line. 6 figs., 2 tabs.

  9. 针刺颈项部阿是穴为主治疗颈性眩晕%Cervical vertigo treated mainly with acupuncture at Ashi points

    Institute of Scientific and Technical Information of China (English)

    王建勋; 李国瑛; 许军花; LIU Xuan

    2011-01-01

    Cervical vertigo is mainly caused by neck soft tissue lesions or bone and joint disease of cervical vertebrae.It is one of the most common diseases in acupuncture department.Though there are a variety of therapies for this disease,it is hard to be cured.It affects the health and life quality of the patients.In recent one year,we have treated 86 cases of cervical vertigo with acupuncture mainly at Ashi points combined with Fēngchi (风池 GB 20).Controlled study on therapeutic effect of acupuncture at regular points was carried on.The report is as follows.

  10. 经筋病阿是穴分布特点探析.%Analysis on the distribution features of Ashi points in Jingjin disorders

    Institute of Scientific and Technical Information of China (English)

    郭长青; 刘乃刚

    2011-01-01

    阿是穴是临床经筋病治疗的主要用穴.本文结合经筋的功能特点分析和总结了经筋病中阿是穴分布的6个特点,即肌肉、韧带等软组织的应力集中点,人体功能活动的应力集中点,相关起协同或拮抗作用肌肉、韧带的起止点、肌腹,腱鞘、脂肪垫、滑囊、滑车、籽骨等处,神经出口处和肌筋膜附着处.%Ashi Points are Major points in clinical to treatment of Jingjin disorders, in this article, combining the function of Jingjin, we analysis and summarize 6 distribution features of Ashi points in Jingjin disorders; the stress concentrating points of soft tissue such as muscle and ligament; the stress concentrating points of joint functional movement; muscle Origins, Terminations and belly of the muscle and ligament that play roles in the cooperation or antagonist; at the points of tendinous sheath, fat pad, bursa synovialis, trochlea, sesamoid and so on; exit of nerves; myofascial skeletal attachment.

  11. Estimation of performance of a high-speed boat by using the Rankine source method; Kosokutei no rankinsosuho ni yoru seino suitei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Eguchi, T. [Mitsui Engineering and Shipbuilding Co. Ltd., Tokyo (Japan)

    1997-10-01

    This paper describes estimation of performance of a high-speed boat by using the Rankine source method. An orthogonal coordinate system is considered, which uses the center of a hull as the zero point, and is made dimensionless by using the hull length. The catamaran boat or the single hull boat being the subject of the discussion is supposed to have a transom stern, and to be sailing at a constant speed in the -X direction. A governing equation and a border condition were formulated using disturbance speed potential and X-direction speed differentiation. An inverse specular image was employed as a specular image system upon considering attitude change in the high-speed boat. As to the division of hull surface, the portions protruded above the static water surface were cut off from among the panel data of boat CAD. Considering a high speed condition in which the water surface is completely separated at the transom section, the water level at the transom section was supposed to be at the same height as at the rear end of the hull. Blow-out intensity at the water surface was derived in such a way that a CAD panel of the rear end of the hull is searched and wave height agrees with the height of the transom in the Z direction. A resistance curve may be obtained easily by using a personal computer. 4 refs., 8 figs.

  12. Changes in trade structure. Impacts of overseas advance on Japanese manufactures; Nihon kigyo no kaigai shinshutsu ni tomonau boeki kozo no henka. Seizogyo ni tsuite no jissho bunseki

    Energy Technology Data Exchange (ETDEWEB)

    Hoshino, Y.; Hattori, T. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1997-06-01

    The trend of overseas advance on recent Japanese manufactures and the change in trade structure were analyzed for each district and industry type to examine the impact of overseas advance on the trade structure. The rate of overseas production in the manufacturing industry significantly increased from 2.9% in 1980 to 8.6% in 1994. The spot manufacturer corporation that advanced into Asia has been recently activating the industrial trade. With the overseas advance of manufacturers, the trade in the same industry type has been growing prosperous between Japan and Asia. In the trade structure, the role of East Asia and capital goods has been rapidly expanding in weight. A remarkable change in structure is in progress. The income elasticities of exports vary depending on the district and item. The income elasticities of imports do not vary depending on the district more than for exports. The chemical product, iron steel, and electric machinery exports to Asia, and the general machinery exports to North America have a high export induced effect. The electric machinery imports from Asia have a high re-import effect. In 1990 to 1994, 79% of its trade surplus is caused by overseas production effects, and 27% by income effects. 7 refs., 8 figs., 18 tabs.

  13. Regulation of gene expression by carbohydrates. Part 1. Phosphoenolpyruvate carboxykinase gene; Tansui kabutsu ni yoru idenshi hatsugen seigyo ( 1 ). Phosphoenolpyruvate san carboxykinase idenshi ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Oda, H. [Nagoya Univ. (Japan)

    1998-09-01

    Focusing on Phosphoenolpyruvate carboxykinase (PEPCK), recent knowledge on the transcription regulating function by carbohydrates via hormone is introduced. PEPCK exists mainly in the liver, kidney, adipose tissue, and small intestine, and the synthetic rate of PEPCK protein is regulated virtually by the transcription of PEPCK gene. Most part of the change is regulated via insulin and glucagon, and glucagon accelerates transcription while insulin suppresses transcription. Suppression by insulin becomes smaller in transgenic mice having reporter genes which lack RE containing part, but sufficient suppression of PEPCK gene expression by high carbohydrate diet is observed. Fasting and high protein diet increase glucagon concentration in the blood to increase cAMP concentration in cells. High PEPCK gene expression is observed with diabetes, which is the main cause for the increase in the value of blood glucose in diabetes. 20 refs., 2 figs.

  14. Efficient conditions for the elution of poliovirus transferred to activated sludge; Kassei odei ni ikoshita poliovirus no yushutsu joken ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kim, T.; Shiragami, N.; Unno, H. [Tokyo Institute of Technology, Tokyo (Japan); Honda, H. [Nagoya University, Nagoya (Japan). Faculty of Engineering; Yano, K. [Tokyo Metropolitan Research Laboratory of Public Health, Tokyo (Japan)

    1994-08-10

    Enteric virus discharged from human being is treated together with sewage water, but the activated sludge process cannot treat it completely. It is, therefore, important to ascertain its behavior and clarify the treatment criteria. For quantification of virus transferred to the activated sludge phase, the virus is put in a free state by using an adequate eluate to make measurement possible by means of a plaque forming method. This paper discusses the eluate used in this case and its conditions, and obtains the following conclusions: a basic region including neutral region is more effective than acidic region when beef extract is used as an eluate; among the chaotropic salts used, NaNO3 is the most effective, and has a capability of elution in a wide range regardless of pH; and the optimal eluting condition involves a combination of certain amounts of beef extract and NaNO3 that can block the electrostatic actions and hydrophobic interactions between the activated sludge and the virus. 20 refs., 7 figs., 3 tabs.

  15. Encouraging chemical biology / international academic exchange programs promoted by the Ministry of Education; Chemical biology no susume / monbusho ni yoru kokusai gakujutsu koryu no suishin ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Imanaka, T. [Kyoto University, Kyoto (Japan)

    1998-06-01

    Described herein is encouraging chemical biology. Chemistry to elucidate fundamental elementary reactions involved in various phenomena and actual conditions of key molecules must be supported by physics for understanding behavior of electrons. The research themes attracting attention recently include sex pheromones of insects, photosynthesis, reactions involving antigens or antibodies, recognition of molecules, memorizing and leaning, and so on. Fundamentals of the life-related phenomena are being elucidated from structures of the related substances and reaction mechanisms involved by the NMR and X-ray diffraction analyses to determine structures of these substances and also by theoretical quantum chemistry to understand electron transfer phenomena within life-related molecules. Also described are international academic exchange programs promoted by the Ministry of Education. Academic researches for the pursuit of truth are crossing the borders in nature. International exchange to promote information exchange and joint researches by researchers of different nationalities pursuing common themes is indispensable for scientific development. The Ministry of Education has been promoting the international academic exchange programs by providing subsidies for international academic researches, promoting international exchange projects at various institutions, such as national universities, inter-university organizations and Japan Society for the Promotion of Science, and supporting scientific projects promoted by UNESCO. 1 fig., 1 tab.

  16. Pseudo-random data acquisition geometry in 3D seismic survey; Sanjigen jishin tansa ni okeru giji random data shutoku reiauto ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Minegishi, M.; Tsuburaya, Y. [Japan National Oil Corp., Tokyo (Japan). Technology Research Center

    1996-10-01

    Influence of pseudo-random geometry on the imaging for 3D seismic exploration data acquisition has been investigate using a simple model by comparing with the regular geometry. When constituting wave front by the interference of elemental waves, pseudo-random geometry data did not always provide good results. In the case of a point diffractor, the imaging operation, where the constituted wave front was returned to the point diffractor by the interference of elemental waves for the spatial alias records, did not always give clear images. In the case of multi point diffractor, good images were obtained with less noise generation in spite of alias records. There are a lot of diffractors in the actual geological structures, which corresponds to the case of multi point diffractors. Finally, better images could be obtained by inputting records acquired using the pseudo-random geometry rather than by inputting spatial alias records acquired using the regular geometry. 7 refs., 6 figs.

  17. On the muscle activity control in the hierarchy motor systems. Hierarchy undo system ni okeru kin no kassei seigyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Akiba, M.; Miyamoto, Y. (Osaka Industrial University, Osaka (Japan). Faculty of Engineering)

    1991-10-31

    Excitory impulses for motor systems are controlled by the psychophysiological nervous systems in the body either autonomically or voluntarily. Involved in the voluntary control loop are motor cortex, basal gangalia, thalamus, cerebellum, etc. The purpose of this study is to confirm whether it is possible to reduce or emphasize the muscle contraction voluntarily through electromyogram (EMG) feedback training. EMG can indicate the excitory impulses of motor units. In the experiments, electrodes were placed on the skin above muscles. A significant reduction effect was observed for subjects trained in relaxation of the forehead musculature through EMG feedback. Results of the experiments suggested that biofeedback training for relaxation of the forehead tensional muscle might be effective in eliminating muscle contraction, and that feedback training for activation of damaged muscles might be effective in emphasizing muscle contraction. 4 refs., 9 figs.

  18. Pitting corrosion of copper in aqueous solutions containing phosphonic acid as an inhibitor. Hosuhon san wo inhibita toshite fukumu suiyoekichu ni okeru do no koshiku ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, Y. (Muroran Univ., Hokkaido (Japan). Graduate School); Seri, O.; Tagashira, K. (Muroran Univ., Hokkaido (Japan)); Nagata, K. (Sumitomo Light Metal Co. Ltd., Tokyo (Japan). Technical Research Lab.)

    1993-09-15

    Phosphonic acid-based inhibitors that are poured into cooling water for copper-tube circulation systems for open heat-accumulators were studied on their influence on pitting corrosion of copper. Amino trimethylene phosphonic acid (ATMP) dissolved into distilled water to 50 ppm was used for the immersion corrosion test. The corrosion-proof effect of additives such as ZnSO4, benzotriazole (BTA) was tested too. 0.5 mm thick phosphate-treated copper plates with a hole of 5 mm in diameter were used as test specimens. Pitting corrosion on the copper plate occurred when ATMP, BTA and ZnSO4 coexisted. It was proved that SO4 [sup 2-] is essential since Na2SO4 in stead of ZnSO4 induced also corrosion. The pitting took place when 0.6 ppm or more of SO4 [sup 2-] was present in a BTA-added ATMP solution. It was observed that the pitting is prone to occur with increase of SO4 [sup 2-] and the number of pitting increases. The following relationship is established when pitting corrosion occurs; E[sub b] [le] E[sub corr], where the former is a potential value at which current density shows a steep increase and the latter is an average value of spontaneous electrode potential showing a plateau. 8 refs., 11 figs., 1 tab.

  19. Regional unification of energy in North America. ; NAFTA and its related matters. Hokubei ni okeru energy no chiiki togo. ; NAFTA to sono kanren ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    The present paper reported energy-related items in the NAFTA. Being discussed among the US, Canada and Mexico, the NAFTA aims at withdrawing the trade barrier, relaxing the investment limitation and protecting the right of intellectual ownership. The foreign enterprises are influenced in both import tax cutdown and original home regulation. Main points which are related to the energy in Mexico are as follows: Mexico reserves the property rights of natural gas and pipelines while the PEMEX maintains the oil export/import and transport rights. In the power generation field, the CFE (Committee for Federal Electricity) owns the power generation and selling rights while the NAFTA approves the foreign investment in the power generation facilities. As per performance contract which forms a special field, incentive is given to the foreign enterprises when succeeding in oil exploration. In the petrochemical field, there exist basic petrochemical products in which the foreign investment is prohibited. A 100% participation of foreign capital is allowed in all other products than the above ones. How the foregoing changes influence the foreign investment is uncertain.

  20. Effect of static magnetic fields on the metamorphosis of frogs; Kaeru no hentai katei ni oyobosu jiba no eikyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Hiwaki, O. [Hiroshima City University, Hiroshima (Japan)

    1996-01-20

    The effect of static magnetic fields on the metamorphosis of frogs was investigated to examine the effect of static magnetic fields on the internal secretion system and nerve system in a living body. In this experiment, the growth and metamorphosis of a Rana Japonica`s larva are inhibited inside the vessel in which a magnet whose upper surface is the N pole was put at the bottom. However, no remarkable change was recognized when a magnet whose upper surface is the S pole was put at the bottom. For a bullfrog, the same result as described above was obtained. The experiment result shows that the vertical upward fields inhibit the growth and metamorphosis of a frog`s larva, but the vertical downward fields do not remarkably act on them. As a result of this experiment, the growth and metamorphosis of a frog are considered to act on the internal secretion system of a tadpole in static magnetic fields when the control by thyroxin is considered. Since the existence of action varies depending on the polarity of vertical magnetic fields, the magnet in a living body is judged to be associated with the internal secretion system of a tadpole. 17 refs., 8 figs.

  1. Horizontal wells in the Daleel field 2nd development campaign; Dariru yuden no niji kaihatsu ni okeru suihei koi ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Yanagisawa, K. [Japex Oman Ltd., Tokyo (Japan)

    1995-11-01

    The horizontal wells excavated at various places in the world have been carried out at an increasing tempo during recent some years. In particular, Oman has a number of small scale petroleum wells and a task on what means their oil production should be increased, therefore the horizontal excavation is judged to be much optimum. In this Daleed field 2nd development mainly consisting the prolonged region development ranged from north to south, all developing oil wells were determined to excavate with the horizontal excavation method and 10 wells were planned to excavate from the judgement of the possibility of low cost, in addition to the advance of the horizontal excavation technique. The excavating operation was conducted from July 1st, 1994 to March 22nd, 1995, and was finished without any failures. Test results of all oil wells are good, and the mean value of the initial production indices of the horizontal wells were about 3 times to that of vertical wells. And, it made possible to produce petroleum from the areas impossible in the vertical wells, because of presence of gas gap. Adoption of the horizontal well increased early oil production rate, which brought a lot of contribution to economics of the project. 3 refs., 9 figs., 1 tab.

  2. On the sea-covering effect of a huge floating structure on the surrounding water; Choogata futai shuhen no kaisui ni taisuru kaimen shahei no eikyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Fujino, M.; Kagemoto, H.; Hamada, T. [The University of Tokyo, Tokyo (Japan)

    1996-12-31

    The numerical analysis program based on the difference method for dynamics of sea water with sea-surface displacement, flow rate, salt content and temperature as the parameters is modified to more accurately assess the effects of a huge marine structure on surrounding environment by adding the effects of insolation and boundary conditions of the sea-covering effects of the floating structure. The numerical simulation was done for summer and winter seasons, not in a sea area but using a rectangular bay with the floating structure at the center. A new flow evolves around the floating structure, due to the sea-covering effect. The flow patterns in summer and winter are clearly different, due to difference in insolation. The predicted flow is also sensitive whether stratification is considered or not, by which is meant that it is important what stratification effect is taken into account. Daily insolation changes are accompanied by vertical distribution of water temperature and its temporal change. These effects are also observed under the floating structure which shields insolation. 10 refs., 17 figs., 4 tabs.

  3. Study of fuel control strategy based on an fuel behavior model for starting conditions; Nenryo kyodo model ni motozuita shidoji no nenryo hosei hosho ni tsuite no kosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Nakajima, Y.; Uchida, M.; Iwano, H.; Oba, H. [Nissan Motor Co. Ltd., Tokyo (Japan)

    1997-10-01

    We have applied a fuel behavior model to a fuel injection system which we call SOFIS (Sophisticated and Optimized Fuel Injection System) so that we get air/fuel ratio control accuracy and good driveability. However the fuel behavior under starting conditions is still not clear. To meet low emission rules and to get better driveability under starting conditions, better air/fuel ratio control is necessary. Now we have understood the ignition timing, injection timing, and injection pulse width required in such conditions. In former days, we analyzed the state of the air/fuel mixture under cold conditions and made a new fuel behavior model which considered fuel loss such as hydrocarbons and dissolution into oil and so on. Al this time, we have applied this idea to starting. We confirm this new model offers improved air/fuel ratio control. 6 refs., 9 figs., 3 tabs.

  4. On the sea-covering effect of a huge floating structure on the surrounding water; Choogata futai shuhen no kaisui ni taisuru kaimen shahei no eikyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Fujino, M.; Kagemoto, H.; Hamada, T. [The University of Tokyo, Tokyo (Japan)

    1996-12-31

    The numerical analysis program based on the difference method for dynamics of sea water with sea-surface displacement, flow rate, salt content and temperature as the parameters is modified to more accurately assess the effects of a huge marine structure on surrounding environment by adding the effects of insolation and boundary conditions of the sea-covering effects of the floating structure. The numerical simulation was done for summer and winter seasons, not in a sea area but using a rectangular bay with the floating structure at the center. A new flow evolves around the floating structure, due to the sea-covering effect. The flow patterns in summer and winter are clearly different, due to difference in insolation. The predicted flow is also sensitive whether stratification is considered or not, by which is meant that it is important what stratification effect is taken into account. Daily insolation changes are accompanied by vertical distribution of water temperature and its temporal change. These effects are also observed under the floating structure which shields insolation. 10 refs., 17 figs., 4 tabs.

  5. Starting and stopping control on power conditioner in photovoltaic power system; Taiyoko hatsuden system ni okeru power conditioner no kido teishi seigyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Hirose, M.; Ishihara, Y.; Todaka, T.; Harada, K. [Doshisha University, Kyoto (Japan); Oshiro, H.; Nakamura, H. [Japan Quality Assurance Organization, Tokyo (Japan)

    1997-11-25

    Studies are made about the control of the power conditioner over the maximum power point tracking (MPPT) function in a photovoltaic power generation system. The analysis is conducted by means of computer simulation into the effect of a start/stop function added to the control of MPPT and the effect on the generation of power of the setting of parameters in the start/stop function. The reduction in output power due to difference between the actual operation point and the optimum operation point is evaluated by use of a load matching correction factor. In this simulation, it is assumed that the solar cell array consists of 13 rows in 5 parallel columns, is capable of a normal output of 3.149kW, has a panel tilted at 30 degrees, and faces due south. The power conditioner is assumed to be a system rated at 3kVA, equipped with system interconnection and back flow features. As a result, it is learned that the stop voltage should be set at 180V or lower and the steady voltage near 185.5V for a good result and that there is not much need after all for the start/stop technique. 2 refs., 8 figs., 2 tabs.

  6. Necessity of irrigation for revegetation on reclaimed land with fly ash. Sekitanbai umetatechi ni okeru ryokuka no tameno kangai no hitsuyosei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Sekiyama, Tetsuo; Kozakai, Kazuki; Okabe, Katsumi.

    1989-02-01

    In view of the growing importance of revegetation measures of a reclaimed land with fly ash discharged from a coal burning thermal power plant, a study was made on necessity of irrigation in case of the positive execution of the above revegetation. This is a report of the above study. The conclusions of the study are as follows: (1) Comparing the available moisture amounts in terms of volume percentage of moisture, about 36% is for fly ash and about 34% for volcanic ash soil, but when fly ash is solidified, the above figure for fly ash becomes about 90% of that for volcanic ash soil. (2) The maximum water infiltration capacity of fly ash is 1/10-1/50 of that of volcanic ash soil and the surface run-off is much. The furrow or drip irrigation system is suitable. (3) The evaporation in fly ash is almost same as that in volcanic ash soil and the designed duty of water irrigation is considered to be 7-8mm/day (in case of cultivation of tangerine and pasture). (4) In case when the above reclaimed land is covered with volcanic ash soil, an aquifer is observed at the boundary layer between the surface soil coverage and the land. Hence draining measures such as underdrainage systems are desirable from the viewpoint of the growth of plants. 8 refs., 8 figs., 2 tabs.

  7. Fixed position holding control for self-propulsion barges under disturbance condition; Gairanka ni okeru jiko baji no teiten hoji seigyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kijima, K.; Murata, W.; Furukawa, Y. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1996-04-10

    In direct hoisting work in suspension bridge construction, since a cable crane directly hoists a bridge beam block put on a barge on the sea, precise fixed position holding function is required for a barge. The control system was then designed on the basis of an ILQ control theory, and the effect of change in time constant as design parameter on fixed position holding performance was studied. In addition, the critical disturbance for fixed position holding control was studied through numerical simulation under various disturbance conditions using the above designed control system. As a result, in the design of control systems on the basis of an ILQ control theory, the precise control system could be designed by diminishing, in particular, the time constant for state variable around a z axis among time constants according to the extent of disturbance. The control performance was largely affected by response delay period from sensing of disturbance to beginning of control. 3 refs., 7 figs., 2 tabs.

  8. Optimization of the ship type using waveform by means of Rankine source method; Rankine source ho ni yoru hakei wo mochiita funagata saitekika ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Hirayama, A.; Eguchi, T. [Mitsui Engineering and Shipbuilding Co. Ltd., Tokyo (Japan)

    1996-04-10

    Among the numerical calculation methods for steady-state wave-making problems, the panel shift Rankine source (PSRS) method has the advantages of rather precise determination of wave pattern of practical ship types, and short calculation period. The wave pattern around the hull was calculated by means of the PSRS method. The waveform analysis was carried out for the wave, to obtain an amplitude function of the original ship type. Based on the amplitude function, a ship type improvement method aiming at the optimization of ship type was provided using a conditional calculus of variation. A Series 60 (Cb=0.6) ship type was selected for the ship type improvement, to apply this technique. It was suggested that optimum design can be made for reducing the wave making resistance by means of this method. For the improvement of Series 60 ship type using this method, a great degree of reduction in the wave making resistance was recognized from the results of numerical waveform analysis. It was suggested that the ship type improvement aiming at the reduction of wave-making resistance can be made in shorter period and by smaller labor compared with the method using a waveform analysis of cistern tests. 5 refs., 9 figs.

  9. Interpretation SP anomaly caused by subsurface fluid flow; Chika ryudokei ni yoru shizen den`i anomaly no kaishaku ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Yasukawa, K. [Geological Survey of Japan, Tsukuba (Japan); Mogi, T.; Kawahira, M. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1996-05-01

    A PTSP simulator, developed by combining a fluid flow simulator and a simulator for computing the spontaneous potential (SP) out of flow velocity distribution, was used to investigate the impact of the distribution of terrain, permeability, and resistivity upon the ground surface SP. SP computation using simple models such as highlands or cliffs indicated that the terrain-caused SP anomaly was negatively dependent upon elevation. It was also indicated, however, that, in some types of resistivity distribution, the SP profile changes, the peak goes out of place, and even the apparent polarity may reverse in extreme cases. In the study of the SP profile for the Takeyu hot spa, Oita Prefecture, PTSP-aided modeling was carried out. It was then found that fluid flows caused by the terrain were not enough to explain the peak at the middle of the mountain, which suggested the existence of a fluid flow caused by temperature distribution. 11 refs., 5 figs.

  10. Analysis of the pressure response of high angle multiple (HAM) fractures intersecting a welbore; Kokeisha multi fracture (HAM) kosei ni okeru atsuryoku oto kaiseki ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Ujo, S.; Osato, K. [Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Arihara, N. [Waseda University, Tokyo (Japan); Schroeder, R.

    1996-05-01

    This paper reports pressure response analysis on wells piercing a high angle multi (HAM) fracture model. In this model which is defined on a three-dimensional space, a plurality of slanted fractures intersect with wells at high angles (however, intersection of fractures with each other is not considered). With respect to the pressure response analysis method using this model, the paper presents a basic differential equation on pressure drawdown and boundary conditions in the wells taking flows in the fractures pseudo-linear, as well as external boundary conditions in calculation regions (a reservoir spreads to an infinite distance, and its top and bottom are closed by non-water permeating beds). The paper also indicates that results of calculating a single vertical fracture model and a slanted fracture model by using a numerical computation program (MULFRAC) based on the above equations agree well respectively with the existing calculation results (calculations performed by Erlougher and Cinco et al). 5 refs., 6 figs.

  11. Development of multi-filter spectroradiometry; Filter hoshiki ni yoru bunka hosharyo no keisoku hoho to sono supekutoru no hyogen hoho ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Miyake, Y.; Aoshima, T.; Minoda, T.; Kato, T.; Kondo, S. [Eiko Instruments Trading Co. Ltd., Tokyo (Japan)

    1996-10-27

    Described in this paper is a technique of solar radiation spectroradiometry in which high-resolution wavelength computation adds to a multi-filter method. The solar spectrum upon entering the atmosphere is scattered and absorbed by parameter-constituting elements such as gas, aerosol, cloud particles, etc., and its spectral contour is complicatedly deformed relative to wavelength. Taking advantage of the fact that the scattering and absorbing characteristics of some of the elements are constant relative to wavelength, a simple equation was constructed to enable high-resolution spectrum measurement wavelength-wise, and this compensates for the limit in measurable wavelength that the conventional multi-filter method suffers from. The new method discussed here is not so expensive as the grating method thanks to the employment of filters, is capable of determining spectral radiation quantities with a precision of {plus_minus}5%, and is reduced in terms of the capacity of memory for data storage. The new method enables data collection under various atmospheric conditions that the four seasons present, which the difficult-to-apply and expensive spectroradiometer fails. It is expected that this method will find its use in collecting basic data for the designing of photovoltaic power generation systems, in the study of photochemical reaction in agriculture, and in collecting basic data for daylight lighting. 1 ref., 6 figs., 2 tabs.

  12. Results of photovoltaic power generation system operation in Tokyo Electric Power Company; Tokyo Denryoku ni okeru taiyoko hatsuden setsubi no unten jisseki ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Fukuda, H.; Itokawa, K. [Tokyo Electric Power Co. Inc., Tokyo (Japan)

    1996-10-27

    A report was made on the measurement of data and the results of the analysis at 14 sites of photovoltaic power generation facilities operated under system interconnection by Tokyo Electric Power Company. This type of system is provided in 40 sites as of the end of fiscal 1995, generating 479kw. The items measured were the generated electric energy at all 14 sites, and the quantity of solar radiation, outside air temperature, panel temperature, etc., at limited sites; and the capacity of each equipment, azimuth and inclination of the panel were also recorded simultaneously. Hourly values were used for the analysis. Five minute values were utilized, however, in the examination of the cause of lowered output and in the situation recognition of the influence of the shade or the change of weather. The utilization factor of the facilities was in the average 10.8% in fiscal 1994 and 10.7% in fiscal 1995. The factor decreased slightly unless the panel azimuth faced due south. The utilization factor at the panel inclination of 35 degrees and 45 degrees showed both 10.4% through the year making no difference. The system seemed to show no overwhelming possibilities in coping with electric power demand. The reason was that deviation existed for 2 hours or so in the peak and that reliability was low as basic power facilities. However, it was determined that the system be continuously examined in future. 9 figs., 1 tab.

  13. Matching of wind turbine type and system scale to wind conditions; Chiten no fukyo ni taisuru furyoku turbine no keitai to sytem taikaku no seigosei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Wakui, T. [Japan Society for the Promotion of Science, Tokyo (Japan); Tanzawa, Y. [Nippon Institute of Technology, Saitama (Japan); Ota, E. [Waseda University, Tokyo (Japan). School of Science and Engineering; Hashizume, T.

    2000-09-25

    The matching of the wind turbine type and system scale of the stand-alone wind turbine generator system to wind conditions is investigated using our dynamic simulation model. This paper examines three types of wind turbines: the Darrieus-Savonius hybrid wind turbine, the Darrieus turbine proper and the up-wind Propeller turbine. These systems are mainly operated at a constant tip speed ratio, which refers to a maximum power coefficient. As a computed result of the net extracting energy under fluctuations of wind speed and direction, the Darrieus turbine proper has little conformability to wind fluctuations because of its output characteristics. As for other wind turbines, large-scale systems do not always have advantages over small-scale systems as the effect of the dynamic characteristics. Furthermore, it is confirmed that the net extracting power of the Propeller turbine under wind direction fluctuations is much reduced when compared with that of the hybrid wind turbine. Thus, it is concluded that the appropriate wind turbine type and system scale exist for each wind condition. (author)

  14. The Theory of Ashi Acupuncture Treatment to Delayed Muscle Soreness%阿是穴针刺法治疗延迟性肌肉酸痛原理

    Institute of Scientific and Technical Information of China (English)

    马士龙

    2015-01-01

    This paper introduces the concept of delayed onset muscle soreness and its mechanism.It implies that Ashi acupuncture can strengthen the assembling of contractile proteins,enhance the recovery of contraction structure,and then treat delayed onset muscle soreness with stable and lasting effects.%介绍了延迟性肌肉酸痛的概念及其机制。认为针刺阿是穴可以加强收缩蛋白的组装、合成而促进收缩结构的恢复,从而治疗延迟性肌肉酸痛,其作用持久稳定。

  15. Pressing Anti-Ashi Point for 50 Cases of Pirifornis Syndrome%点按反阿是穴为主治疗梨状肌综合征50例

    Institute of Scientific and Technical Information of China (English)

    朱骏飞

    2014-01-01

    Objective:To observe the efficacy of pressing anti-Ashi point for piriformis syndrome. Methods:50 cases of patients with pirifornis syn-drome were all treated by pressing anti-Ashi point, also combined with other treatments like poking and kneading, stick-beating, motion traction. Re-sult:35 cases were cured, 13 cases were effective and 2 cases invalid, the total effective rate was 96.0%. Conclusion:Pressing anti-Ashi point has sig-nificant curative effect on piriformis syndrome.%目的:观察点按反阿是穴为主治疗梨状肌综合征的疗效。方法:50例患者均根据病情采用点按反阿是穴为主,配合拨揉、棒击、运动牵拉等方法进行治疗。结果:治愈35例,有效13例,无效2例,总有效率为96.0%。结论:点按反阿是穴为主治疗梨状肌综合征疗效显著。

  16. 以反阿是穴为主按摩治疗踝关节扭伤的病例分析%The Function of Massage with Anti-Ashi Point Mainly in Ankle Sprain

    Institute of Scientific and Technical Information of China (English)

    徐群

    2013-01-01

      踝关节扭伤是体育运动以及日常生活中的常见损伤。以反阿是穴为主按摩治疗踝关节扭伤主要采用反阿是穴与阿是穴联合治疗的方式,以点揉、点按、分筋等手法进行治疗。实践与研究证实痊愈、显效率达91%,无效率为0。具有明显疗效。通过近几年的实践同时总结出:反阿是穴寻找是否准确直接影响治疗效果;阿是穴与反阿是穴的恰当选取,辨证施治,对治疗起到明显的促进作用;治疗后伤愈初期功能锻炼时要打好保护支持带,锻炼时要注重恢复踝关节的活动范围和局部肌肉力量;恢复训练或体育锻炼要注意由小负荷小强度逐渐加大负荷。%  The ankle sprain is common injury in sports as well as in everyday life. The treatment of the ankle sprain with the Ashi point and the anti-Ashi point is effective from our experience. The results showed that the effectiveness is 91% and none shows un-effectiveness. While the practice in recent years has proved that if the right location of the anti-Ashi point influence directly on the therapeutic effect; A proper selection of Ashi point and anti-Ashi point and right therapy play a significant role; it is very important that the necessary to have a rest after the treatment; swathing the belt to protective support during the injury early recovery training, Not only pay attention to the restoration for joint range of activities but also pay attention to restore partial muscle strength during recovery training; The workload of the resuming training should be increased step by step.

  17. Treatment of 100 Cases of Cervical Spondylotic Radiculopathy by Electroacupuncture of Jiaji (Ex-B2) plus Oblique Needling Ashi Point

    Institute of Scientific and Technical Information of China (English)

    LI Xiao-qing; ZHOU Wei-guang

    2006-01-01

    One hundred patients were diagnosed with cervicalspondylotic radiculopathy definitely by symptoms, signs and X-ray examination. The therapeutic method was acupuncture of Jiaji(Ex-B 2) on the affected segment and the upper and lower vertebrae close together. After the arrival of qi, the needles were connected to acupuncture therapeutic instrument. Meanwhile, the numb, heavy and uncomfortable area on the shoulder and upper limb, where something like cord could be touched, was selected as Ashi point. The needle was inserted perpendicularly into the skin on the place that the cord was most obvious and inserted obliquely and deeply along the cord. After 3-4 courses of treatment, 90 cases got marked effectiveness and 10 cases got effectiveness.%100例患者经症状,体征和X线检查确诊为神经根型颈椎病,治疗方法是针刺病变节段及上下相邻两节脊椎夹脊穴得气后,接针灸治疗仪,同时在肩部及上肢选取麻、沉不适区,触及条索状物,为阿是穴,从条索最明显处垂直刺入皮肤,沿条索纵向斜刺深入.3~4疗程后显效90例,有效10例.

  18. 59 Cases of Stiff Neck Treated with Comprehensive therapy by Anti - Ashi Points Techniques%以反阿是穴疗法为主综合治疗落枕59例

    Institute of Scientific and Technical Information of China (English)

    郝焕光

    2014-01-01

    Objective To observe the clinical efficacy of the anti - Ashi points techniques in the treatment of stiff neck with the comprehensive therapy such as cupping,joint reduction and traction according to pattern/ syndrome differentiation of TCM. Methods Fifty - nine cases of stiff neck were treated based on pattern/ syndrome differentiation of TCM. Twenty - two cases of muscular spasm were simply treated with anti- Ashi point technique,18 cases of wind cold invasion were treated with anti - Ashi point technique and cup-ping therapy,12 cases of joint dislocation were treated with anti - Ashi point technique and joint reduction therapy,7 cases of synovial incarceration were treated with anti - Ashi point technique and traction therapy. The clinical effects were observed after treatment. Results Of 59 cases,43 cases(73. 2% )were cured after one treatment,16 cases(26. 8% )cured after two treatments,and the total effective rate was 100% . Conclu-sion The anti - Ashi points technique in the comprehensive therapy is the highly effective and less pain therapeutic program for stiff neck,combined with cupping,joint reduction and traction.%目的:观察以反阿是穴疗法为主体治疗方法,并根据不同中医辨证类型配合拔罐、关节整复、牵引综合治疗落枕的临床疗效。方法59例落枕患者根据不同中医辨证类型进行治疗,肌肉痉挛型(22例)单纯采用反阿是穴疗法,感受风寒型(18例)采用反阿是穴疗法结合拔罐疗法,关节紊乱型(12例)采用反阿是穴疗法结合关节整复疗法,滑膜嵌顿型(7例)采用反阿是穴疗法结合牵引疗法。观察治疗后临床效果。结果59例患者中,1次治愈者43例(73.2%),2次治愈者16例(26.8%),总治愈率为100%。结论以反阿是穴疗法为主体治疗方法,并配合拔罐、关节整复、牵引综合治疗落枕,是临床一套收效快、痛苦小的治疗方案。

  19. Method for calculating steady-state waves in an air cushion vehicle. Part 2; Air cushion vehicle no teijo zoha keisanho ni tsuite. 2

    Energy Technology Data Exchange (ETDEWEB)

    Eguchi, T. [Mitsui Engineering and Shipbuilding Co. Ltd., Tokyo (Japan)

    1997-10-01

    Discussions were given on a method to estimate resistance constituents in wave resistance made in an air chamber of an air cushion vehicle (ACV). An orthogonal coordinate system is considered, which uses the center of a hull as the zero point and is made dimensionless by using cushion length. Flow around the ACV is supposed as an ideal flow, whereas speed potential is defined in the flow field. Then, a linear free surface condition is hypothesized on water surface Z = 0. Number and density of waves were used to introduce a condition to be satisfied by the speed potential. A numerical calculation method arranged a blow-out panel on the water surface, and used a panel shift type Rankine source method which satisfies the free surface condition at Z = 0. Cushion pressure distribution becomes a step-like discontinuous function, and mathematical infinity is generated in the differentiation values. Under an assumption that the pressure rises per one panel where pressure jump is present, the distribution was approximated by providing one panel with inclination of the finite quantity therein. Estimation on wave height distribution in the cushion chamber showed a tendency of qualitatively agreeing with the experimental result, but the wave heights shown in the experiment had the average level decreased as it goes toward the rear of the hull. 5 refs., 5 figs.

  20. On statistical properties of wave amplitudes in stormy sea. Effect of short-crestedness; Daihakoji no haro no tokeiteki seishitsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Yoshimoto, H. [Ship Research Inst., Tokyo (Japan)

    1996-12-31

    Since ocean waves encountered by ocean vessels or offshore structures in actual sea areas present extremely irregular variations, a stochastic method is necessary to estimate their statistical properties. This paper first shows a calculation method for probability density function for water level variation which strictly incorporates a secondary non-linear effect containing directional dispersibility by modeling ocean waves as short-crested irregular waves. Then, the paper specifically elucidates effects of the directional dispersibility of ocean waves on statistical amount of amplitudes by deriving the statistical amount of the amplitudes based on the probability density function of the water level variation and by using a numerical simulation. The paper finally takes up data of waves in stormy sea observed in an experiment in an actual sea area, compares the result with that of theoretical calculations, and evaluates reasonability of this method. With this estimation method, individual secondary components or components of difference and sum may be subjected to influence of the directional dispersibility, but they do not differ much from the case of long-crested irregular waves on the whole. 21 refs., 11 figs., 2 tabs.

  1. Completion of Akita Petroleum Storing Base and commencement of stockpiling; Akita sekiyu bichiku kichi no zenmen kansei to oil in ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    A report was made on the characteristics and the commencement of stockpiling of the Akita Petroleum Storing Base (Ojika City, Akita Prefecture; storing capacity 4,500,000kl) which was completed in June, 1995 with its overall operation started in July in the same year. This base is the only example that employed an underground tank system in the national storing bases in Japan. The following are described in the report. The crude oil tank, a reinforced concrete construction with 97m in diameter and 48m in underground depth, was built in a mudstone ground; as an underground tank system, it was required to have only one half of the tank diameter for the distance between tanks, and was a storing facility with a better area efficiency than an aboveground system; the oil stockpiling was commenced for 890,000kl in 1989, 2,010,000kl from 1992 through 1993 and 580,000kl in 1994, and a capability for a smooth release in emergency was confirmed; no abnormality was observed in the existing dispensing tank (aboveground type) at the time of the earthquake (seismic intensity: 5) in May, 1983; and so on. 7 figs., 2 tabs.

  2. Heat transfer correlation for high-finned tubes in staggered arrangement; High fin tube chidori hairetsu no netsudentatsuritsu seirishiki ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Hashizume, K. [Hiroshima Institute of Technology, Hiroshima (Japan)

    1995-07-25

    Existing correlations are reviewed for heat transfer of high-finned tubes in staggered arrangement, and compared with published experimental data. These data include those using tubes for air-coolers (AC) and for heat recovery heat exchangers in the high-temperature region (HRHX). Comparisons showed that none of the correlations can predict experimental data for both AC and for HRHX. Therefore, a new correlation is proposed which can predict almost all data within 10%. 5 refs., 6 figs., 3 tabs.

  3. On teh non-destructive inspection system of the coating oil strage tank. Coating tank no hihakai kensa system ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Miyagawa, K. (Nihon University, Tokyo (Japan). Collete of Industrial Technology)

    1991-03-25

    Recently inside bottom steel plates in oil storage tanks are often coated by epoxy resin to prevent corrosion. Since dangerous tanks are obligated to be overhauled regularly by fire protection law, coatings of the tanks are removed when inspected each time and recoated after inspection. To eliminate such waste, a non-destructive inspection system to inspect over coating films without removing them has been demanded. This report examines the non-destructive inspection system on coating films of the tanks and introduces the study on the method to measure corrosion of bottom steel plates by the ultrasonic thickness gage as well as the research on the development of the system and method for non-destructive inspection to detect surface flaw on the weld parts of the bottom plates. Consequently, it was confirmed through experiments that non-destructive inspection on the coating films is possible. 1 ref., 2 tabs.

  4. On the domestic gas discrimination system by using DSP for practical use; DSP wo riyo shita kateiyo gas shikibetsu system no jitsuyoka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Sugahara, K.; Ushio, K.; Yea, B.; Osaki, T.; Konishi, R. [Tottori Univ. (Japan)

    1998-08-31

    The structuring method for a system of discriminating domestic gas in real-time and the result of discriminating experiments performed on hydrogen gas, alcohol vapor, and cigarette smoke using the system are reported. The system takes advantage of the dependence on temperature of the response of sensor element to the kind of gas. Output signal from the sensor is discriminated by neutral network. This system has high gas selectivity for hydrogen gas, and a system with less malfunction against alcohol vapor and cigarette smoke as compared with the conventional system can be structured by utilizing the system to such domestic units as a as alarm. 128K-word memory is used for the discriminating system, and the size of program loaded in ROM is only about 7.5K words. For the ultimate system, memory may not be required to be expanded outside for the system by using on-chip memory in a digital signal processor, and smaller scale systems can be expected to be structured. 7 refs., 6 figs., 1 tab.

  5. On the development and tests of the experimental hovercraft for the Antarctic. Jikken prime yo nankyoku hovercraft no kaihatsu to shiken ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Murao, R. (Aoyama Gakuin University, Tokyo (Japan). School of Science and Engineering); Takeuchi, S. (National Inst. of Polar Research, Tokyo (Japan)); Inaba, M. (Mitsui Engineering and Shipbuilding Co. Ltd., Tokyo (Japan))

    1991-05-05

    For the purpose of obtaining technology data to build a practical hovercraft for the Antarctic, an experimental hovercraft was manufactured. Operation conditions were presupposed as follows: minimum tempreture of {minus} 20 centigrade under operation, and maximum wind speed of 10m/s at the time of running. The target speed was supposed to be 55km/h without wind on ice, and some 30km/h with head wind of 7.5m/s. This experimental hovercraft is a pressure chamber type with flexible skirts of about 0.6m in depth around it. For flotation, it keeps the part of pressurized air from the centrifugal fan under its bottom. It is propelled by air jet which blows the part of pressurized air from the propeller and centrifugal fan in the propeller duct toward its rear. As a result of speed trial at the Antarctic, the hovercraft satisfied the measured value of maximum speed of 55km/h. In the operation tests since 1981 to 1989, the following results were obtained; the control method, travelling performance, environmental applicability in the icy zone, parking method over the winter, and operation, maintenance, and repair in observation supports. 5 refs., 9 figs., 2 tabs.

  6. Electrical resistivity of rock and its correlation to engineering properties; Ganseki {center{underscore}dot} ganban no hiteiko to sono kogakuteki seishitsu tono kankei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Nishimaki, Hitoshi; Sekine, Ichiro [Toda Corp., Tokyo (Japan); Saito, Akira [Mitsui Mineral Development Engineering Corp., Tokyo (Japan); Yoshinaka, Ryunoshin [Saitama University, Saitama (Japan). Faculty of Engineering

    1999-04-01

    In order to interpret resistivity profiles derived from electrical and electromagnetic surveys, it is necessary to study the correlation between electrical resistivity of rock and engineering properties. In this paper, we investigate the electrical resistivity of rock and its correlation to engineering properties. The experiments reveal the importance of electric surface conduction for studying those problems. These results suggest that resistivity measurements can be used as a quantitative guide in evaluating an area as to its engineering properties. (author)

  7. Selected papers from the twenty-third annual workshop on geothermal reservoir engineering, Stanford University; Dai 23 kai Stanford daigaku chinetsu choryuso kogaku workshop ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, T. [Geological Survey of Japan, Tsukuba (Japan)

    1998-06-15

    The annual workshop on geothermal reservoir engineering at Stanford University which is now the twenty-third meeting was held for three days starting January 26, 1998. Contents of the lectures included topics as various as 12 cases of field studies, 12 modelings, 8 cases of geochemistry, 8 cases of earth science, 4 cases of physical exploration, 6 high-temperature rocks, 2 cases of deep geothermal research, 5 cases related to wells, and three others. By countries, the United States presented about half of the total number of papers, the Philippines presented about ten papers, and Japan five papers. This paper introduces the summary of four papers said to have drawn interest of the participants. The thesis No. 1 describes utilization in field scale of mass-flow measuring chemical tracers in geothermal areas in the Philippines. The thesis No. 2 is about hydraulic properties of the Dixie Valley (Nevada) geothermal area as seen from well test analysis. The thesis No. 3 is about fracture permeability of reservoir scale in the Dixie Valley (Nevada) geothermal area. The thesis No. 4 mentions high-order differential for a phase front propagation problem in geothermal systems. 4 refs., 5 figs., 2 tabs.

  8. Technical engineers exchange project (coal mine technology field). Training in China; Gijutsusha koryu jigyo (tanko gijutsu bun`ya). Chugoku no kenshu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Adachi, T. [Japan Coal Energy Center, Tokyo (Japan)

    1998-07-01

    The paper described JCOAL`s project on the exchange of technical coal engineers of China. In the project on sending of engineers to China in the first term, coal mine engineers of Japan (Taiheiyo Coal Mine, Kushiro Works, Training Center) were sent to the Daitun coal-thermal power plant, Peixuan city, Jiangsu province, in September, 1997 to introduce the production control technology in Japan. They contributed to the heightening of productivity in coal mines in China. Eighteen Chinese participated in the training. Mechanization has been comparatively well in progress, and it was 83% in coal mining and 91% in drilling. The kind of coal is mostly a raw material coal. The stuff members are 30,000, and expert engineers are 4,200. The plant has an output of 130,000 kWh, owns its railroad, is run on the general multiple management, and is largely developing. The project on sending of engineers to China in the last term was carried out in February 1998 for tracing/confirming how the results of the training conducted in September are made the most of and if or not there is something bad and for obtaining the detailed data. A certain degree of promotion and effects were able to be confirmed. A project on training of the head, sub-head, etc. who were invited to Japan to lean production/management control was also carried out in November and December 1997. 1 tab.

  9. Applied technology by use of inverters for underground minig in Ikeshima Colliery; Ikeshima tanko no konaiyo inverter oyo gijutsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Hiromoto, K.; Murakami, M.; Horinouchi, K.; Yamaguchi, M. [Matsushima Coal Mining Co. Ltd., Fukuoka (Japan)

    1997-10-25

    This paper describes the application of inverters for underground mining in the Ikeshima Coal Mine. The total length of belt conveyors for coal transportation in the seam road has become 7500 m with increasing the peak transportation by the belt conveyors from the face to pocket. The coal transportation facilities composed of 25 belt conveyors have become significant. At the same time, facilities for transportation of materials and members have been increased with a long distance to the faces. Inverter control of belt conveyors was introduced in 1985 for controlling the coal transportation amount. After that, explosion proof inverters for underground use were developed. In 1985, 22 kW inverter variable speed motor was employed for the chain conveyor at the main coal lifting facility. Thus, the coal transportation amount can be controlled. In 1994, this system was employed for the belt conveyor at the intermediate pocket. Thus, the transportation amount can be controlled in the centralized control room. In 1995, an explosion proof 45 kW inverter remote control hoist has been developed, which is operated by wire remote control. Labor-saving of transportation of materials and members can be achieved. In 1996, shuttle running high-speed man riding car with inverter driving has been introduced in the southern horizontal gallery. 4 figs.

  10. Improvement of sound quality of in-line 4 cylinder gasoline engine. Chokuretsu 4 kito engine no onshitsu kaizen ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Uno, T.; Konishi, M.; Fukumasu, T. (Toyota Motor Corp., Aichi (Japan))

    1992-06-01

    In relation with a technology to control sound quality of in-line 4 cylinder gasoline engine, this paper describes reducing a rumbling noise, which is a voiced intermittent noise generated when an engine speed is accelerated, and a booming noise. The paper indicates the crank shaft, the power plant,and the intake system as the major source of a rumbling noise, and proposes a method to reduce the rumbling noise based on results of analyzing the effect of bending rigidity and twisting rigidity on vibrations and the bearing oil film characteristics. The booming noise was discussed from comparing the booming noise levels in a car mounted with an in-line 4 cylinder engine, a car mounted with an engine with a balance shaft, and a car mounted with a V-type 6 cylinder engine, and from the relationship among a power plant bending mode, an air cleaner capacity and an air intake noise. Pressure pulsation in the intake system generates a film vibration which can cause radiation noise and vibration transmitted to the car body to develop the booming noise. Improving the rigidity of the intake system surface and optimizing the position of attachment to the car body are important factors to reduce the booming noise. 6 refs., 19 figs.

  11. Promising electrolyte materials for the coming lithium secondary batteries; Jisedai lithium niji denchi yo denkaishitsu. Atarashii denkaishitsuen no seishitsu to saikin no doko ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kita, F.; Kawakami, A. [Hitachi Maxell, Ltd., Osaka (Japan); Sonoda, T. [Kyushu University, Fukuoka (Japan). Institute of Advanced Material Study

    1997-11-05

    This paper introduces conceptions on electrolytes, and describes new conceptions on electrolyte salts and their future prospects. What is evaluated in fundamental discussions on electrolytes is ion conductivity. LiPF6 has poor thermal stability, but provides high conductivity and is stable at high voltages, hence used as electrolyte for lithium ion batteries. The ion conductivity of an electrolyte is proportional to dissociated ion concentration and its mobility, and also to degree of dissociation of lithium salts. (CF3SO2)2NLi and (CF3CO)2NLi having two of the same electron attractive groups show two times greater ion conductivity than CF3SO2Li and CF3CO2Li. Electrolytes having oxidation resistance to be used in lithium ion batteries are LiPF6 and LiBF4. 3M Corporation has developed a method to stabilize imide salt electrolyte. Application of imide-based lithium salt as polymer is also studied. Development of new lithium salts, including synthesis of anionic species with weak orientation is under way. 22 refs., 5 figs., 5 tabs.

  12. Occurrence and purification on microcystis species. Toxicology of blue-green algae toxins; Aoko/sono hassei to joka taisaku. Aoko no yudoku busshitsu no dokusei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kaya, K. [National Inst. for Environmental Studies, Tsukuba (Japan)

    1994-09-10

    In recent years the blue-green algae has occurred tremendously in the lakes at every places in the world, and therefore it has become a social problem. Especially in Australia and New Zealand, the damages not only on the cattles and the wild animals, they have commenced to develop up to the health problems of the residents. By a progress of the study of the blue-green algae toxins, a structure and toxicity of many blue-green algae toxins have been made clear. The microcystin which it one of them, is a hepatic toxin produced by the microcystis, anabaena and oscillatoria. By the way, because it was made clear recently by a study done by the National Cancer Center that it had a carcinogenesis promotion action, its action has been paid attention over again. In the blue-green algae toxins, besides the microcystin it is made clear that there are the nervus toxins such as the anatoxin-a and anatoxin-a (s) produced by anabaena, the aphantoxin produced by aphanizomenon and so forth. In this paper, as for the toxicity manifestation mechanism of the microcystin which is thought to become a point at issue in Japan, an information up to date is introduced. 17 refs., 2 figs.

  13. Analysis and evaluation methods for chemical contaminants in clean room air; Kagaku osen no bunseki hyokaho clean room kukichu no kagaku osen busshitsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Fujimoto, T.

    1998-07-31

    As for, chemical contamination in a cleanroom air has taken up as a important problem. As the main source is building materials, after construction the execution of countermeasures is difficult. Out-gas evaluation and selection in building materials, chemical filters for removing specific organic matter and so on, are a large technical theme in the future and analytical techniques corresponding them become necessary. In this paper, analytical methods of airborne molecular contaminants (AMCs) are introduced. Main samples are AMCs in cleanroom atmosphere, on silicon wafer surface and out-gas from raw materials for cleanroom construction materials such as sealant, plastics and so on. Analytical methods consist of quantification of inorganic compounds, organic compounds and identification of abnormal spot with local/surface analysis. Various interesting findings with analytical data are obtained and investigated. 22 refs., 6 figs., 5 tabs.

  14. Development of melting system using oxy-coal combustion; Sekitan chokusetsu riyo kinzoku yoyu system gijutsu (NSR) (pilot setsubi unten jokyo ni tsuite)

    Energy Technology Data Exchange (ETDEWEB)

    Sugiyama, T. [Center for Coal Utilization, Japan, Tokyo (Japan); Suwa, T.; Kobayashi, N.; Iino, K.; Yamamoto, Y.; Igarashi, H. [Nippon Sanso K.K., Tokyo (Japan)

    1996-09-01

    This metal melting system is a process to efficiently melt and regenerate scraps of aluminum, copper and iron by utilizing high-temperature energy obtained from pulverized coal-oxygen combustion. The process is intended to utilize coal in place of petroleum for reduced fuel cost. Joint studies have been carried out as a subsidy operation of the Agency of Natural Resources and Energy with a schedule of six years starting fiscal 1992. Development tests are being performed using a 5-ton/ch pilot plant facility since fiscal 1995 after having gone through experiments using a 1-ton/ch bench scale furnace. This paper reports the results obtained to date. Using the pilot plant facility, fiscal 1995 has achieved the initial target values, such as thermal efficiency of 55% or higher, and yield of 96% or higher for non-ferrous metals and 94% or higher for iron. The melting behavior in the furnace has improved the thermal efficiency as a whole by retaining the conditions in the preheating step for an extended period of time. The thermal efficiency has been improved better than with the bench furnace as a result of upscaling effect. 9 figs., 3 tabs.

  15. On the improvement of mechanical properties of monolithic silica aerogels (for transparent insulating material); Silica aerogel (tomei dannetsu zairyo) kyodo no kaizen ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tajiri, K.; Igarashi, K.; Tanemura, S. [National Industrial Research Institute of Nagoya, Nagoya (Japan)

    1997-11-25

    Study was made on improvement of the strength of silica aerogel as transparent insulating material. Silica aerogel is a low-density porous material with high heat insulation and transparency. To develop a insulating material with high transparency, monolithic silica aerogel was studied. For direct use of it for windows, its strength improvement was attempted. The aerogel was prepared by supercritical drying (alcohol or CO2) of silica wet gel obtained by hydrolysis and condensation of silicon alkoxide solution. To prepare the aerogel bonded on plate glass for strength improvement, the aerogel was bonded to alkoxide by exposing active silanol radical through F-etching of plate glass surface. However, to obtain the practical large-area bonded aerogel, shrinkage control of the aerogel in supercritical drying was necessary. Addition of Laponite into a silica network for strength improvement by polymer increased the bending strength by 50%. Although some reduction of its transparency was observed because of clouding, its heat insulation was stable. Further strength improvement is necessary for its practical use. 5 figs., 1 tab.

  16. Paper science education and research systems in Japan for the next generation. Jisedai no Nippon no seishi kyoikuter dot kenkyu taisei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Onabe, F. (The University of Tokyo, Tokyo (Japan). Faculty of Agriculture)

    1991-10-01

    Analyses were given on problems in the paper science education and research systems in Japan while comparing them with those in other countries, and considerations were given on problems to be worked on by business entities and universities to comply with the phenomenally changing high technologies, global environmental problems and international environments. For example, research themes adopted by universities in Japan appear biased to chemical aspects of materials. The largest reason for this should be the problems that lie in pieces of equipment and facilities. Many western countries have such a research framework that engineers can be educated using pilot machines, while in Japan the engineer education is carried out after the engineers enter corporations, to which a certain limitation is felt. It may be envisaged that, rather than simply with each university conducting paper science education at its Forest Products Department, universities specializing in paper science and research are created to vitalize the next generation. Also, in the future preparation for the expectations from the Asian economic spheres and the trade frictions, it may be necessary to enhance the systems to receive students from foreign countries, and to aim at research on differentiation and high value addition. 2 refs.

  17. Field test of trash removal screen utilizing current energy in irrigation canal; Ryusui energy wo riyoshita suisha jojinki no jissho shiken ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Goto, M.; Katayama, S. [National Research Institute of Agricultural Engineering, Tsukuba (Japan)

    1996-10-27

    A trash removal system working by current energy has been developed for agricultural waterway. It consists of a wheel, shaft, screen and conveyor to exhaust collected trash. Current energy is converted by the wheel into rotational power, which drives the screen lake and conveyor. It is installed in an agricultural water way, 1.2m wide, 1/5000 in gradient and 1m/s in flow speed. Observed in the field test were service conditions of the system and torque limiter, water level at each portion, wheel speed, and types and quantity of trash collected. It is found to be serviceable at a low cost. The troubles, such as noise and bent lake occurring when the chain is out of place, have been solved. The test also has clarified types of trash discarded in the waterway. 3 refs., 11 figs.

  18. Standing steady-state wave-making calculation method for air cushion vehicles; Air cushion vehicle no teijo zoha keisanho ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Eguchi, T. [Mitsui Engineering and Shipbuilding Co. Ltd., Tokyo (Japan)

    1996-04-10

    The pulse-height distribution of a cushion room of air cushion vehicle (ACV) has been tried to be approached by means of the panel shift type Rankine source method. When using this method, it was not required to introduce the pressure distribution model simulating the fall-off effect for the step-formed cushion pressure distribution. The wave form and wave making resistance could be estimated precisely by assigning the pressure gradient to one longitudinal direction panel in the calculation. The waveform shape within the cushion room could be calculated rather precisely by comparing with the analytic solution. This calculation method did have an ability providing the pulse-height information in the cushion room of ACV for seal design and configuration of ships. The analytic solution using for the comparison was sufficient for determining the pulse-height in the high speed region. However, it was hard to respond to non-linear problems or optional shape problems. It was pointed out to be further improved. 5 refs., 8 figs.

  19. Measures to prevent oil pollution in oceans, and their preservation effect; Kaiyo no abura osen no boshi taisaku to hozen koka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Shinoda, T.; Fukuchi, N.; Fujii, H. [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Sato, S.

    1996-04-10

    It was intended to confirm, based on various problems surrounding oil flow-out accidents, that oil fences whose use is first considered when an oil flow-out accident occurs cause oil leakage due to oil pass-through phenomenon as the largest defect in performance of oil fences. Therefore, oil fence performance was analyzed by using a simulation. Furthermore, several types of diffusion prevention and avoidance measures, and combinations thereof were evaluated by using multi-criteria analysis. It was also elucidated how recognitions on the importance of methods to prevent oil pollution differ depending on standpoints. Difference in oil flow-out prevention performance of oil fences due to variation in tidal currents was made clear by combining a diffusion simulation using the finite element method with the prevention performance of oil fences relative to the tidal currents. In areas with no good hydrographic conditions where pollution spreads rapidly, it is necessary to suppress oil diffusion by extending oil fences double or triple, and using gelling agents. 4 refs., 8 figs.

  20. Flow field calculation around the measuring part of a circulated flow tank for measurement; Keisokuyo kairyu suiso sokuteibu no ryujo keisan ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Nishimoto, H.; Ogura, R.; Yamazaki, R. [West Japan Fluid Engineering Co. Ltd., Nagasaki (Japan)

    1996-04-10

    In order to increase a fluid dynamic understanding of the flow field around the measuring part as for the leveling of free surface of the circulated flow tank for measurement, the velocity and free surface profile at the measuring part have been calculated by applying the numerical fluid dynamics. The results were compared with actual phenomena. For the average velocity at the measuring part, inclining angle of surpressing plate, and quantity of water in the tank, the flow field simulation by the numerical fluid dynamics has provided a qualitative agreement with actual phenomena. Especially, it was clarified from the viewpoint of numerical fluid dynamics that the fine adjustment of the inclining angle of surpressing plate and quantity of water in the tank greatly affect the creation of horizontal free surface at the measuring part. Furthermore, effects of the length of measuring part and the ceiling tilt angle of pipe conduit in the downstream of measuring part, which were hard to be analyzed experimentally from the viewpoint of facility and cost, were investigated. Consequently, it was clarified that there are critical length of the measuring part and optimum ceiling tilt angle in the leveling of horizontal free surface. Thus, an instruction for designing was obtained. The present flow field simulation was useful for the fluid dynamic understanding of the flow field at the measuring part, as for the leveling of horizontal free surface. 1 ref., 8 figs.

  1. Drift data of the sea-gravity meter (SL-2) installed on the R/V Hakurei-maru; `Hakureimaru` senjo jurokei (SL-2) no drift ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Joshima, M. [Geological Survey of Japan, Tsukuba (Japan); Ishihara, T. [Japan National Oil Corp., Tokyo (Japan)

    1996-05-01

    This paper reports a rapid change in the drift of a sea-gravity meter SL-2 after 1987 and after its modification in 1993. In order to confirm the accuracy of the sea-gravity meter of the Hakurei-maru, changes in the lapse of time were summarized on the relative gravity value at the Funabashi base and on the drift rate in each voyage. The drift rates in the case of departing from and returning to Funabashi base were all less than 0.1mgal/day except the first year of 1987, which was presumably due to the growing stability of the gravimeter. The drift value of 1992 was 0.05mgal/day, producing an error of only 2mgal without drift compensation at the end of a 40 day voyage. The gravimeter after the total renewal of the control part in 1993 produced a large drift in the direction opposite to the conventional drift. The cause of these phenomena was supposed to be some kind of change in the spring property during the gap of one year; this large drift seemed to be settling down after the elapse of approximately one year. 4 refs., 8 figs., 2 tabs.

  2. Air pollution and allergy. ; Focusing on the relationship between nitrogen dioxide and bronchial asthma. Taiki osen to allergy. ; Tokuni nisanka chisso to kikanshi zensoku no kankei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kagawa, J. (Tokyo Women' s Medical College, Tokyo (Japan))

    1993-01-10

    Recently NO2 is drawing wide attention as a factor developing or worsening bronichial asthma. This paper describes the results of a study concerning this problem based on many survey data and statistics. There have been reported cases such as Tokyo-Yokohama asthma, Yokkaichi asthma, New Orleans asthma and a number of epidemiological investigations, but no sufficient clarification has not been given on the mechanism and the causal relation with respect to this problem. In animal experiments using NO2, naturally symptom-developing prompt type allergy is clearly recognized in dogs. Strong or weak infection resistance due to exposure to NO2 is confirmed in cavies. However, there is an example where the increase of disease rate is inversely correlated with the concentration of air pollutant and there are also some facts suggesting participation of factors other than air pollutant like ticks, mold and food. In order to obtain correct evaluation on the participation of NO2, it is indispensable to carry out investigations or experiments which can detect the effects due to NO2 by appropriately controlling these other factors. It can be said that there is small possibility of developing the symptom by being exposed to NO2 alone in the present level of atmospheric NO2 concentration. 68 refs., 1 fig., 4 tabs.

  3. On the prediction of hydroelastic behaviors of a huge floating structure in waves. 2nd Report; Choogata futai no harochu dansei kyodo no suiteiho ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Murai, M.; Kagemoto, H.; Fujino, M. [The University of Tokyo, Tokyo (Japan)

    1997-08-01

    On the hydroelastic behaviors of a huge floating structure, a mutual interaction theory based on the area division method is used for the analysis of a fluid problem and a mode analysis method is used for the analysis of deformation. On the continuous deformation of a floating structure, the structure is considered as a set of partial structures obtained when the plane shape was divided into squares and discretely handled as a series of rigid motions in the small partial structures obtained by dividing the partial structures more finely. The experimental result in a water tank and the distribution method at a singular point were compared on the deformation of the elastic floating structure estimated by calculation based on this formulation. The result showed that the estimation method on the hydroelastic problem proposed in this paper is valid. On the prediction of hydroelastic behaviors of a huge floating structure, various calculation examples indicate that the hydroelastic behavior is not only the relation between the structure length and wavelength, but also that the bending rigidity of a structure is a very important factor. For a huge floating structure in the 5,000 m class, up to shorter wavelength of about {lambda}/L = 1/100 must be investigated. 6 refs., 14 figs., 5 tabs.

  4. Evaluation of the performance in the solar assisted heat pump system; Taiyonetsu riyo heat pump system no seino hyoka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Y. [Osaka Institute of Technology, Osaka (Japan)

    1996-10-27

    Performance of a solar heating system with a hydrothermal source heat pump was evaluated and compared with that of a direct solar heating system. The sun-dependency rates ({Sigma}D and {Sigma}H)of the direct system and heat pump (HP)-provided system were expressed as a function of the rate ({alpha}) of the auxiliary heat against the collected heat and as a function of the performance coefficient and {alpha}, respectively. When the sun-dependency rates are compared, it is found that the HP-provided system is the more advantageous when {Sigma}H/{Sigma}D>1. The relationship between the {alpha}`s of the two systems was clarified and computation was performed to compare the sun-dependency rates on condition that the two are equal in the heat collecting area. Although the sun-dependence rate cannot be elevated to 100% in the HP-provided system, it achieves a sun-dependency rate higher than that of the direct system even when the heat collecting area is small. In cases where the building is economically limited, for instance, with respect to the area for solar collector installation, it is advantageous to employ the HP-provided system. 5 figs., 1 tab.

  5. Detection of the oscillation mode of measured waveforms in power systems by Prony analysis; Puroni kaisekiho ni yoru denryoku keito ni okeru jissoku hakei no doyo mode kenshutsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, K. [Kansai Electaric Power Co. Inc., Osaka (Japan)

    2000-04-01

    This paper describes the detection method of the oscillation modes by Prony analysis from measured data on power systems. A Prony analysis method can obtain the oscillation frequency and logarithmic damping rate corresponding to eigenvalue directly, and is suitable for detecting the oscillation modes. The analysis result showed that longer sampling intervals of 0.2-0.4s allows detection of the long-period oscillation modes from less data, and the index corresponding to waveform areas allows evaluation of the significance of each mode. It was also confirmed that a low-pass filter with a time constant of nearly 0.2s is effective for poor data including various noises, and correction of amplitude and phase shifts is possible by filter. In addition, the study result on application of a Prony analysis method to instantaneous value waveforms showed that analysis of harmonic characteristics is possible by selecting proper analytical parameters, and a Prony analysis method is applicable to analysis of measured data enough. (NEDO)

  6. Study on computer graphics. PC graphic system for supposed landscape images of substations and transmission lines; Computer graphics ni kansuru kenkyu. Pasokon ni yoru hendensho sodensen keikan kansei yosozu sakusei system ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, Y.; Usagawa, Y.; Kawamoto, A. [Chugoku Electric Power Co. Inc., Hiroshima (Japan)

    1996-10-25

    In order to obtain the understanding of residents around sites for landscape images in construction of power plants, substations and transmission lines, preparation of supposed landscape images was studied using computer graphics (CG). The system developed on a graphics workstation in 1994 was expensive and poorer in operability than PC although real clear images were obtained. The system was thus improved to be usable on PC. The improved system is usable on OA systems in offices, and possible to transmit image data and print out high-quality images. In addition, the system offers the preparation function of facility layouts and computer graphics. The system is featured by necessary training only for 2-3 days, lower cost and necessary lower initial investment. Since its user interface was, in particular, considered to make it possible for designers to easily operate and timely cope with demands of residents, flexible selection out of various cases, rapid simulation and efficient business became possible. 3 refs., 3 figs., 5 tabs.

  7. Relationship between the electric resistivity and the rain fall in discontinuity zone of rock slope by the continuous measurement; Renzoku tokei ni yoru ganban shamen no furenzokutaibu ni okeru mikake hiteiko henka to kou tono kankei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kusumi, H.; Nishida, K. [Kansai University, Osaka (Japan). Faculty of Engineering; Nakamura, M. [Newjec Inc., Osaka (Japan)

    1996-10-01

    The relationship between change in resistivity and rainfall was studied by continuously measuring resistivities of fracture zone and stratum boundary along the measuring line of 95m long from the top to bottom of rock slope. The measurement field was located on a hill of 150-200m high at the northern part of Arima-Takatsuki tectonic line. Electrodes of 30m in maximum measuring depth were arranged at 289 points by dipole-dipole method. Resistivity was continuously measured at time intervals of 6 hours. Apparent resistivity was hardly affected by rainfall at points with less infiltration of stormwater from the ground surface, while it decreased by rainfall at points on fracture zone, stratum boundary or bleeding channel. The change rate of apparent resistivity could be approximated with the exponential function of rainfall. In such case, the apparent resistivity under most dried condition at the concerned point should be used as reference maximum apparent resistivity. The change rate of apparent resistivity due to rainfall in fracture zone reflects infiltration of stormwater, suggesting to be useful for disaster prevention of slopes. 5 refs., 6 figs.

  8. Actual conditions of energy management in office buildings; Results of quetionaire inquiry about load leveling. Gyomu yo biru ni okeru energy kanri no jittai ni tsuite; Fuka heijunka ni kakawaru anketo chosa kekka

    Energy Technology Data Exchange (ETDEWEB)

    Okubo, Katsuhiko (The Inst. of Applied Energy, Tokyo, (Japan))

    1989-07-20

    The electric power demand in Japan is increasing, and it is expected that annual load factor shows decreasing tendency. All electric power companies endeavor to improve load leveling than as it was, and intend to introduce direct saving system to control the loading equipments of consumers as well as indirect control such as midnight power system. Therefore, quetionaire inquiry about this new system was made for business power consumers in which power there are much difference in consumed power between day and night and much efficacy for power saving. As the results of the inquiry, it was understood that equipment of automatic or remote control for loading equipments were already introduced by many consumers and adoption of airconditioners controlled at every floor or every room is increased. So, about the control of the equipments in cosumers a method is also required so that electric power companies shall control the maximum demand by consumers and selection of control equipments are left on consumers' decision and judgment, and it is considered to be important that control by electric power companies shall not only turn on or off switchs but also realize convenience and economy of consumers. 9 figs., 3 tabs.

  9. Future trends in coal mining technology at Ikeshima Colliery. Mainly, setup and actual results of high-speed man riding train; Ikeshima Tanko ni okeru tanko gijutsu no doko. Toku ni kosoku jinsha no donyu to jisseki ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Hiromoto, K.; Irie, T.; Murakami, M. [Matsushima Coal Mining Co. Ltd., Fukuoka (Japan); Takahashi, K. [The Coal Mining Research Center, Japan, Tokyo (Japan)

    1997-10-25

    This paper describes the introduction of high-speed man riding train at Ikeshima Coal Mine. The production area is below the sea bottom in the southern offshore of the Ikeshima Island. With increasing the depth of production faces, it is significant for the insurance of operation time to enhance the intensive and highly efficient transportation system and to reduce the transportation and movement time. A high-speed man riding train has been introduced as a transportation system for workers. It is operated in the base gallery at the -650 m level from No. 1 train stop to southern train stop with a distance of 5477 m. It is operated at the maximum speed of 50 km/h, and the single transportation time can be reduced from 18 to 12 minutes. Construction was started in 1995, and practical operation was started in November 1996. Various technical problems were solved concerning the high-speed operation, advanced management of tracks, and monitor and control of operation conditions and a signal system. This system was named as `Goddess-Jikai` which has been operated 19 times a day in the running interval with a return way of 11 km. It has been safely and comfortably operated in a total distance of 33700 km by the end of May 1997. Oscillation is measured by the continuous oscillation monitoring system, and track management is enhanced using a track inspection train. Future high-speed safe operation is expected. 6 figs., 6 tabs.

  10. Investigation on comparative studies relative to the world oil market models used at Energy Modeling Forum (EMF). EMF ni okeru sekai sekiyu shijo model ni kansuru hikaku kenkyu ni tsuite no chosa

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S. (The Institute of Energy Economics, Tokyo (Japan))

    1994-01-01

    The Energy Modeling Forum (EMF) has established a working group comprising researchers and policy operators delegated from the three sectors of the government, academic world, and private businesses. The working group has advanced comparative studies relative to the world oil market models during 1991 to 1992, and compiled the 'International Oil Supplies and Demands, EMF REPORT 11'. This paper introduces its summary. The group has selected 11 models from the existing oil market models, and given developers of these models with 12 kinds of common premises to perform scenario analyses. Some of the results of comparisons and analyses on the 11 times 12 kinds of simulation results may be quoted as follows: a common trend has been observed that the Middle East dependency will increase; overseas supply source dependency will increase rapidly in major energy consuming countries (the dependency in the U.S.A. will increase from 1/3 in 1988 to 2/3 in 2010); and estimations on demands and prices up to 2010 were diversified, clearly reflecting differences in viewpoints. 2 refs.

  11. 肾周阿是穴注射生理盐水治疗肾绞痛28例%The Treatment of 28 Renal Colic Patients by Transfusing a Saline Drip in AShi Points

    Institute of Scientific and Technical Information of China (English)

    何国华; 赵志亮

    2015-01-01

    目的:观察肾周阿是穴穴位注射生理盐水治疗肾绞痛的临床疗效。方法:将56例肾绞痛患者随机分为治疗组、对照组各28例。2组均给予非甾体类镇痛抗炎药、阿片类镇痛药及解痉药等肾绞痛常规治疗;观察组同时采用生理盐水肾周阿是穴穴位注射治疗。结果:疼痛缓解时间、疼痛消失时间观察组均短于对照组,2组比较差异有统计学意义(P<0.05)。总有效率观察组为96.43%,对照组为85.71%,2组比较差异有统计学意义(P<0.05)。结论:肾周阿是穴穴位注射生理盐水治疗肾绞痛临床疗效显著,可较快缓解肾绞痛。%Objective: To observe the clinical effect of saline drips in AShi points peripheral kidney on the treatment of renal colic. Methods:The 56 cases of renal colic randomized into treatment and control groups with 28 cases in each. Both groups administered such conventional medicines for renal colic as nonsteroidal anti-inflamma-tory drugs, opioid analgesics as well as spasmolytics, the observation group were injected saline drips in AShi points around kidney. Results:The time for pain relieving and disappearing in the observation group was shorter than those in the control group, the differences in comparison of the time between two groups were significant (P<0.05);the differences in the comparison between the total effective rates of 96.43%in the observation group and 85.71%in the control group were obvious (P<0.05). Conclusion:The saline drips in AShi pionts are significantly effective in cur-ing renal colic and faster in stopping its pain.

  12. 火针点刺反阿是穴治疗急性腰扭伤疗效观察%Therapeutic Observation of Pricking Anti-Ashi Points with Fire Needles for Acute Lumbar Sprain

    Institute of Scientific and Technical Information of China (English)

    张群; 范春兰; 许金海; 莫文

    2016-01-01

    目的:观察火针点刺反阿是穴治疗急性腰扭伤的临床疗效。方法将76急性腰扭伤患者随机分为治疗组和对照组,每组38例。治疗组采用火针点刺反阿是穴治疗,对照组采用温针治疗。两组治疗1、5次后分别采用腰腿痛视觉模拟评分法(VAS)和汉译Roland-Morris腰痛功能障碍问卷表(RMDQ)对患者腰部疼痛及功能障碍进行评定,比较两组临床疗效。结果两组治疗1、5次后VAS评分和汉译RMDQ积分与同组治疗前比较,差异均具有统计学意义(P<0.01)。治疗组治疗1、5次后VAS评分和汉译RMDQ积分与对照组比较,差异均具有统计学意义(P<0.05)。治疗组总有效率和治愈率分别为94.7%和63.2%,对照组分别为86.8%和42.1%,两组比较差异具有统计学意义(P<0.01)。结论火针点刺反阿是穴是一种治疗急性腰扭伤的有效方法,即刻止痛效果明显。%Objective To observe the clinical efficacy of pricking anti-Ashi points with fire needles in treating acute lumbar sprain.Method Seventy-six patients with acute lumbar sprain were randomized into a treatment group and a control group, 38 cases in each group. The treatment group was intervened by pricking anti-Ashi points with fire needles, while the control group was by warm needling. The Visual Analogue Scale (VAS) and Roland-Morris Dysfunction Questionnaire (RMDQ) were adopted to evaluate lumbar pain and dysfunction after 1-day and 5-day treatment, and the clinical efficacies were compared between the two groups.Result Respectively after the first treatment session and 5 treatment sessions, the VAS and RMDQ scores were significantly changed in both groups (P<0.01). Respectively after the first treatment session and 5 treatment sessions, the VAS and RMDQ scores in the treatment group were significantly different from that in the control group (P<0.05). The total effective rate and recovery rate were respectively 94.7% and 63.2% in the treatment

  13. Water Environmental Quality Assessment of Upriver Sections of Ashi River in Autumn%秋季阿什河流域上游水环境质量评价

    Institute of Scientific and Technical Information of China (English)

    任磊; 于洪贤; 马成学; 王迪; 卞少伟

    2011-01-01

    As a spare water head site of domestic water resources for Harbin,The water quality of Xiquanyan Reservoir is closely related to water security of millions of citizens.The upstream of Ashi River basin is the main sub basin of Xiquanyan reservoir and its water quality directly affect water quality of the reservoir.The water quality in upper reaches of Ashi River was assessed by the methods of single factor pollution index and grey connecting evaluation method based on the monitored physical and chemical index of the water quality in September 2010.The results showed that the water quality in all sampling points was in GradeⅠexcept for R8(Grade Ⅱ).Grey evaluation method was found superior to single-factor method for the evaluation,which was closer to the actual situation of upper Ash River basin.Single-factor pollution index only revealed pollution degree of certain pollutant instead of the whole water body.Meanwhile,the Gray evaluation method will take advantage of environmental monitoring data and comprehensively analyzed the water pollution better.%阿什河流域上游是西泉眼水库的主要集水区,其水质状况直接影响到水库水质。2010年9月对阿什河流域上游8个断面的水质理化指标进行了检测,并运用单因子污染指数法与灰色关联评价法对阿什河流域上游水质进行了评价。结果表明:灰色关联评价法的结果显示8个断面中除R8为Ⅱ类水质外,其它断面均为Ⅰ类水质,断面水质较清洁。单因子污染指数法仅可反映出某种污染物的污染程度而不能反映出整个水体的污染程度;相比于单因子法,灰色关联评价法能充分利用环境监测数据,全面分析水体污染程度。灰色关联评价法优于单因素法,其评价结果更接近于阿什河上游流域水体的实际情况。

  14. Technologies adopted in the lean-burn GA15DE engine for improving combustion and controlling the air-fuel ratio; Kogata 4 kito lean burn engine (GA15DE) ni okeru nensho kaizen oyobi seigyo gijutsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Saito, K.; Matsumura, M. [Nissan Motor Co. Ltd., Tokyo (Japan)

    1994-10-07

    This paper summarizes an automotive engine with improved fuel consumption, having realized lean combustion. The lean-burn engine is such an engine that can be operated in an air-fuel ratio compatible in the combustion stability limit and the NOx emission limit by means of combustion improvement, and achieved improvement in fuel consumption as the result. The engine can be expected of higher fuel consumption improving effect than the EGR of the conventional engines because of the lean-burn mechanism. The newly developed lean-burn engine is characterized by less change in its specifications from the basic specifications. Lean fuel burning requires creating a gas mixture condition that is easy to ignite and acquiring a gas flowing field which spreads quickly upon ignition. To achieve these goals, swirl control valves and phase difference cams were disposed. Further, long-discharge coils are used to improve the ignitability. In order to operate the tertiary catalyst more effectively, an A/F sensor that operates in the catalytic area was adopted for the air-fuel ratio feedback control in place of an O2 sensor. The mileage of a vehicle equipped with the lean-burn engine was increased by 17.8% to 20.5 km/l. 2 refs., 13 figs., 2 tabs.

  15. Investigation on standard deviation of high strength concrete in field and trial of its prediction at relatively large age. Kokyodo concrete no kyodo zoshin ni tomonau baratsuki no henka oyobi sono yosoku ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tomatsuri, K. (Taisei Corp., Tokyo (Japan))

    1991-10-30

    Concrete strength varies in accordance with material proportioning and age, and is usually mixed and designed at the determined age in order to manifest the specified strength. Concerning high strength concrete with design strength over 360kg/cm{sup 2}, however, there is no clear provision to estimate increse and deviation of the strength in the case where either age or cumulative temperature varies. In this study, the strength and the distribution of standard curing concrete and concrete after long piriod of time were measured and analyzed statistically in regard to 14 kinds of high strength concrete with the nominal strength between 360 to 465kg/cm{sup 2} of three construction projects. Considering that strength ratio of concrete at two different kinds of cumulative temperature showed the nominal distribution, a method to predict the strength distribution of concrete after a long period of time was presented. In this method, for instance, use of such parameters as standard deviation of strength on the 28th day of age and strength index could make it possible to predict the average strength and the standard deviation at different ages. 9 refs., 15 figs., 6 tabs.

  16. On the relation between free volume and powder pressure with the gas stream in the powder moving-bed; Gasu nagare wo tomonau kotai idoso ni okeru kukanritsu to ryutaiatsu no kankei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tomoyasu, Suminao; Yoshino, Akio; Iwata, Hiroshi; Kawazoe, Hiromitsu

    1999-04-05

    On the stand pipe with gas stream equipped the bottom in fluidized bed from powder and equation of continuity of the gas, equation of momentum balance considering frictional force of wall surface and equation of pressure loss of the gas by relative speed and test data on the axial gas pressure distribution besides with stand pipe axial direction powder pressure {sigma}{sub z} relational expression of free volume {epsilon} it asks ask. According to this result, (1) d{sigma}{sub z}/d{epsilon} is increased in free volume or big part in the stand pipe entrance, and it once lowers in the middle, and in addition, it increases in the downward again. That is to say, the inflection point of the powder pressure does the right and presence in the. intermediate. (2) There is mainly the high possibility by the effect of the frictional force of stand pipe wall surface on d{sigma}{sub z}/d{epsilon} increasing in the stand pipe inlet vicinity. (3) The powder pressure is not only free volume but also function of the powder particle diameter too. And, this powder ratio and free volume also showed that the distribution of amount of gas which flow and axial gas pressure, powder pressure, free volume, etc. was obtained the stand pipe from relational expression of particle size and other theoretical formula. (translated by NEDO)

  17. Correlation of voidage and stress of granular materials in a packed moving bed accompanied with gas flow; Gasu nagare wo tomonau funtai idoso ni okeru kugekiritsu to funtaiatsu no kankei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tomoyasu, Yoshitada. [Sanzou Energy Engineering Corp., Okayama (Japan); Yoshino, Fumio.; Iwata, Hiroshi.; Kawazoe, Hiromitsu. [Tottori University, Tottori (Japan). Dept. of Mechanical Engineering

    1999-03-10

    The flow characteristics of granular materials and gas in a vertical packed moving bed, called a [stand pipe], furnished at the bottom of the fluidized bed are investigated theoretically and experimentally. A correlation equation of axial stress {sigma}{sub z} and voidage {epsilon} of granular materials in the stand pipe is proposed through investigations of the continuity equation, the momentum balance equation, Ergun's equation for gas pressure loss and the gas pressure distribution data measured experimentally in the axial direction. Regarding the relation of the axial stress and the voidage, it was recogniged that : 1. The absolute value of d{sigma}{sub z}/d{epsilon} is large at the voidage near the minimum fluidizing condition, and at the voidage in the dense packed condition, and an inflection point of {sigma}{sub z} exists in range between the both conditions ; 2. It seems to be the wall-friction-effect of stand pipe that the absolute value of d{sigma}{sub z}/d{epsilon} is larger at the inlet of stand pipe, and ; 3. The stress is also a function of the particle diameter. The gas flow rate, axial stress distribution of granular materials, gas pressure distribution and voidage distribution in the axial direction of the stand pipe can be calculated from relating equations. (author)

  18. Method for estimating `K` value for a case where concentrated load acts upon a crack surface; Kiretsumen ni shuchu kaju ga sayosuru baai no K chi suiteiho ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Toyosada, M.; Goto, K.; Niwa, T.; Maki, M. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1996-10-01

    A proposal was made on a method to estimate simply the `K` value where concentrated load acts upon a crack surface by utilizing results of stress analysis for the crack-free problem against one external load, and `K` value analysis against different crack lengths. If a `K` value is known when concentrated load acts upon a crack surface, `K` values due to each external load and remaining stress can be estimated. This is possible by using the superposition principle with which stress distribution and remaining stress distribution for the crack-free problem are given on a case where each external load acts upon, and the `K` value for the case when concentrated load acts upon a crack surface is integrated by considering the above distributions. For the case where concentrated load acts upon a crack surface of CT test pieces, the crack length and the position on which the concentrated load acts upon are varied, and the `K` value for the case where concentrated load acts upon a crack surface is derived by BEM, whereas the derived `K` value-related expression was expressed by a polynomial approximation. From these results, it was found that the `K` value can be estimated easily for the case where the concentrated load acts upon a crack surface at accuracy presenting no problems in practical use. 5 refs., 8 figs.

  19. Relation between front suspension layout and handling performance. Analysis depending on the Taguchi method and ADAMS; Front suspension layout to soda tokusei no kankei ni tsuite. Kiko kaiseki gengo wo mochiita hinshitsu kogaku ni yoru kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Okada, K. [Daihatsu Motor Co. Ltd., Osaka (Japan)

    1997-10-01

    A variation of suspension layout gives an influence to the vehicle dynamics. Examined the suspension layout variation to make the handling performance change small. Analyzed the effect of suspension layout variation about steering response delay and gain besides the tire wear effect and movable load. 3 refs., 12 figs., 4 tabs.

  20. HYFLEX (Hypersonic Flight Experiment). Results of flight testing (Navigation, guidance and control of HYFLEX vehicle and actual reentry flight trajectory); Gokuchoonsoku hiko jikken (HYFLEX) ni tsuite. Hiko kekka wo chushin ni (koho yudo seigyo to jitsuhiko keiro)

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, K.; Takizawa, M. [National Aerospace Laboratory, Tokyo (Japan); Ishimoto, S.; Morito, T. [National Space Development Agency of Japan, Tokyo (Japan); Tsujioka, M.; Shimura, K. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan)

    1997-11-05

    The HYFLEX vehicle is the first reentry testing vehicle with an airframe generating lift in Japan. Establishment of guidance and control technology is one of the purposes. For the design of flight trajectory, in order to satisfy the constraint of J-1 rocket during launching and the heat resistance performance of HYFLEX, the altitude 110 km and ground speed 3.9 km/s were determined as an apogee condition of the reentry trajectory. For the trajectory design on the ground surface, were considered the insurance of radar tracking and telemetry transfer from the Ogasawara Tracking Station and the load reduction for development cost and attitude control system. The navigation, guidance and control system is composed of an inertia sensor unit, an on-board computer, and an on-board software (OBS). The attitude is controlled by the elevon at the rear end of airframe and the gas jet. The design requirements include an accuracy of flight trajectory and a stable flight by attitude control. In response to these requirements, OBS was divided into function units, i.e., navigation, guidance, and control, which were individually designed. The flight experiments were conducted as scheduled. 12 refs., 3 figs., 1 tab.

  1. Evaluation of geological conditions by ''drilling logging system''. Yuatsu drill ni yoru sakuko data wo mochiita ganban hyoka oyobi kiriha zenpo chishitsu no yosoku gijutsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Aoki, K.; Inaba, T.; Shiogama, Y.; Tezuka, Y. (KajimaCorp., Tokyo (Japan))

    1991-10-31

    In order to predict precisely geological conditions ahead of a face changing with the progress of excavation work of rock caverns such as a tunnel, the drilling logging system was developed which allows to measure, store and analyze drilling data during drilling by hydraulic rotary percussion drilling machines, and the quantitative prediction of geological conditions ahead of a face was tested applying the system to a granite site. As a result, by adopting the drilling energy rate (workload per rock volume of a drilling machine during drilling) as an analytical parameter, the good correlation was found between the drilling energy rate and geological condition (rock property classification) such as a hardness of rocks and quantity of cracks. In addition, the geological condition ahead of a face was probably predictable by estimating the distribution of the drilling energy rate in a wide area by geostatistics mehtod. 5 refs., 9 figs.

  2. Estimation of subsurface structures in a Minami Noshiro 3D seismic survey region by seismic-array observations of microtremors; Minami Noshiro sanjigen jishin tansa kuikinai no hyoso kozo ni tsuite. Bido no array kansoku ni yoru suitei

    Energy Technology Data Exchange (ETDEWEB)

    Okada, H.; Ling, S.; Ishikawa, K. [Hokkaido University, Sapporo (Japan); Tsuburaya, Y.; Minegishi, M. [Japan National Oil Corp., Tokyo (Japan). Technology Research Center

    1997-05-27

    Japan National Oil Corporation Technology Research Center has carried out experiments on the three-dimensional seismic survey method which is regarded as an effective means for petroleum exploration. The experiments were conducted at the Minami Noshiro area in Akita Prefecture. Seismometer arrays were developed in radii of 30 to 300 m at seven points in the three-dimensional seismic exploration region to observe microtremors. The purpose is to estimate S-wave velocities from the ground surface to the foundation by using surface waves included in microtremors. Estimation of the surface bed structure is also included in the purpose since this is indispensable in seismic exploration using the reflection method. This paper reports results of the microtremor observations and the estimation on S-wave velocities (microtremor exploration). One or two kinds of arrays with different sizes composed of seven observation points per area were developed to observe microtremors independently. The important point in the result obtained in the present experiments is that a low velocity bed suggesting existence of faults was estimated. It will be necessary to repeat experiments and observations in the future to verify whether this microtremor exploration method has that much of exploration capability. For the time being, however, interest is addressed to considerations on comparison with the result of 3D experiments using the reflection method. 4 refs., 7 figs.

  3. FY 1997 report of survey on the intellectual property in international collaboration research project; 1997 nendo chosa hokokusho (kokusai kyodo kenkyu ni okeru chiteki zaisanken ni tsuite no chosa hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In promoting international collaboration research project, coordination of the patent system of each country which participants to the project belong to has broad implications in concluding the contract for the project. For example, in Japan, 100% of the patent belongs to the government for contrast or collaboration project with the government. While, in the USA, the patent developed by the private company belongs to the private company even for the contrast project. In Japan, the shared patent can not be transferred to the third party or implemented without agreement with the partner. While, in the USA, the shared patent can be transferred to the third party or implemented without agreement with the partner. Due to such a difference, some projects can not be established by ill coordination of intellectual property even when the meaning of the projects is well understood. In this survey, was investigated the outline of patent systems of major countries to study about what should well balanced treatment of intellectual property in international collaboration research project be in the future. 4 figs., 8 tabs.

  4. Survey report for fiscal 1998. Evaluation by industrial circles of the COP3 outcome and their future response (America); 1998 nendo chosa hokokusho. COP3 no kekka ni taisuru sangyokai no hyoka oyobi kongo no taio ni tsuite (Beikoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Response in America to COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) is investigated. Office of Energy Efficiency and Renewable Energy (EE) of America's Department of Energy conducts activities designed to protect environments and supports America's economic competitiveness. The scope of EE activities is quite wide, covering efforts at energy efficiency improvement and renewal energy utilization for all energy consuming sectors involving construction work and equipment for buildings, various industries and public utility works, and transportation. EE also supports and promotes the development of advanced industrial materials, electric vehicles, hybrid vehicles, fuel cells, etc. In the field of renewable energy, it deals with the exploitation of sunlight, biomass, wind force, water power, geothermal energy, etc. It also supports efficiency improvement efforts being undertaken through studies of advanced power transmission and distribution, high-temperature superconduction, energy storage, etc. The said supports are provided not only by Federal Government but also by state governments, and include financial aids. A number of programs are under way, worked out and promoted by the respective bureaus and departments. They are evaluated, protected, and implemented through the partnership of official and civilian organizations. (NEDO)

  5. On the hydroelastic response of box-shaped floating structure with shallow draft. Tank test with large scale model; Senkitsusui hakogata futai no harochu dansei oto ni tsuite. Ogata mokei ni yoru suiso shiken

    Energy Technology Data Exchange (ETDEWEB)

    Yago, K.; Endo, H. [Ship Research Inst., Tokyo (Japan)

    1996-12-31

    The hydroelastic response test was carried out in waves using an approximately 10m long large model, and the numerical analysis was done by the direct method, for a commercial-size (300m long) box-shaped floating structure with shallow draft. The scale ratio of the model is 1/30.8, and the minimum wave cycle is around 0.7s from wave-making capacity of the tank, which corresponds to 4 to 14s with the commercial-size structure. Elastic displacement and bending strain were measured. The calculated results by the direct method are in good agreement with the observed results. The fluid dynamic mutual interference effects between elements are weak in added mass but strong in damping force, indicating that the range of mutual interference is strongly related to rolling cycle in the range of mutual interference. Wave pressure on the floating structure bottom is high at the upper side of the wave, greatly damping towards the downside of the wave. However, response amplitude of elastic displacement tends to increase at the ends, both in upside and downside of the wave. For the floating structure studied, the 0 to 4th mode components are predominant in longitudinal waves, and the 6th or higher mode components are negligibly low. 21 refs., 15 figs., 2 tabs.

  6. Time domain electromagnetic method for petroleum exploration. Part 3. Case study in Yoneyama area; Sekiyu tansa ni okeru TDEM ho data shutoku to kaiseki ni tsuite. 3. Niigataken Yoneyama chiiki deno tekiyorei

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, H.; Mitsuhata, Y. [Japan National Oil Corp., Tokyo (Japan); Shiga, N. [Mitsui Mineral Development Engineering Co. Ltd., Tokyo (Japan)

    1996-05-01

    The result is reported of a TDEM method-based survey for oil exploration conducted in the Yoneyama district, Niigata Prefecture. The survey covered the southern part of the sedimentary basin in the prefecture, known for the poor quality of the seismic prospecting data that had been recorded. The purpose of the TDEM method-assisted survey was to probe the high-resistivity volcanic rock structure and low-resistivity sedimentary layer, and to know their details. The obtained data were subjected to interpretation by use of the 1D inversion method. A 4000m-deep level was subjected to interpretation, 34 data were inputted, and the early model consisted of 20 layers. As the result, it was found that there was a high-resistivity layer ranging from the ground surface down to a depth of approximately 500m, that a low-resistivity layer 2500-3000m in thickness lay thereunder, and that the lowest layer had a high resistivity of approximately 100 Ohm m. By comparing these data with the geological structure, structures were disclosed corresponding to the rock bed depth, Ukawa syncline, Ishiguro anticline, and Yoneyama mountain mass. 3 refs., 10 figs., 1 tab.

  7. On the hydroelastic response of box-shaped floating structure with shallow draft. Tank test with large scale model; Senkitsusui hakogata futai no harochu dansei oto ni tsuite. Ogata mokei ni yoru suiso shiken

    Energy Technology Data Exchange (ETDEWEB)

    Yago, K.; Endo, H. [Ship Research Inst., Tokyo (Japan)

    1996-12-31

    The hydroelastic response test was carried out in waves using an approximately 10m long large model, and the numerical analysis was done by the direct method, for a commercial-size (300m long) box-shaped floating structure with shallow draft. The scale ratio of the model is 1/30.8, and the minimum wave cycle is around 0.7s from wave-making capacity of the tank, which corresponds to 4 to 14s with the commercial-size structure. Elastic displacement and bending strain were measured. The calculated results by the direct method are in good agreement with the observed results. The fluid dynamic mutual interference effects between elements are weak in added mass but strong in damping force, indicating that the range of mutual interference is strongly related to rolling cycle in the range of mutual interference. Wave pressure on the floating structure bottom is high at the upper side of the wave, greatly damping towards the downside of the wave. However, response amplitude of elastic displacement tends to increase at the ends, both in upside and downside of the wave. For the floating structure studied, the 0 to 4th mode components are predominant in longitudinal waves, and the 6th or higher mode components are negligibly low. 21 refs., 15 figs., 2 tabs.

  8. Engineering characteristics of the improved soil by deep mixing method using coal ash; Sekitanbai wo riyoshita FGC shinso kongo shori koho ni yoru kairyodo no kogakuteki seishitsu to kongo no tenbo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, T. [Center for Coal Utilization, Japan, Tokyo (Japan); Azuma, K.; Watanabe, M. [Electric Power Development Co. Ltd., Tokyo (Japan)

    1996-09-01

    Japan currently produces about six million tons of coal ash annually, whose effective bulk utilization to earth engineering materials is an important issue of technological development. A slurry may be made by mixing the following three kinds of materials: fly ash discharged from power plants exclusively burning dust coal (F), gypsum generated as a by-product in a stack gas desulfurizing process (G), and commercially available cement (C). The slurry would be called an FGC slurry taking the first letters of the materials. This paper presents the results of laboratory tests, in-situ execution tests and centrifuge model testing on engineering characteristics of soils improved by the FGC slurry when the slurry is applied to implementing the deep mixing method. As a result, a large number of findings were obtained including the following matters: the FGC deep mixing method makes it possible to improve ground beds having small deformation coefficient with the same accuracy as in the cement-based deep mixing (CDM) method at strengths lower than 5 kg/cm {sup 2} which is difficult with the CDM method, not to speak of strengths equivalent to that is possible with the normal CDM method; and development of a ground bed with improved strength is possible without being governed by quality and kinds of the fly ash. 1 ref., 23 figs., 5 tabs.

  9. Computation accuracy of flow conditions around a very large floating structure using a multi-layer model. Comparison with experimental results; Taso model ni yoru choogata futai mawari no ryukyo keisan seido ni tsuite. Jikken tono hikaku

    Energy Technology Data Exchange (ETDEWEB)

    Kyotsuka, Y. [Kyushu University, Fukuoka (Japan); Omori, H.; Nakagawa, H.; Kobayashi, M. [Mitsui Engineering and Shipbuilding Co. Ltd., Tokyo (Japan)

    1996-04-10

    As one of the environmental problems in sea areas surrounding a very large floating structure (VLFS), change in flow condition is important, and it is one of the factors dominating the prediction of succeeding diffusion and ecosystems. Although a multi-layer model is in wide use for computation of flow condition and diffusion in one inner bay, its applicability should be reexamined because of no consideration of VLFSs. In this study, flow velocity profiles around a barge were then measured through the towing test of a barge in shallow water, and compared with computation results using a multi-layer model. The multi-layer model computed the flow velocity profiles by dividing the flow region to be computed into normal one and that under VLFS, and determined pressures under VLFS by 2-D Poisson`s equation. Slip condition was used as boundary condition at the bottom considering the number of layers under VLFS. Further numerical computation was conducted by 2-D MAC method, in particular, to compare flow around the wake of VLFS with experimental one. Both computation results well agreed with experimental one. 3 refs., 9 figs., 1 tab.

  10. Processing of the reflection seismic data which were acquired in the continental shelf off the north-west Australia; Australia hokusei tairikudana chiiki ni oite shutokusareta hanshaho chishitsu tansa data no shori ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Amano, H. [Japan National Oil Corp., Tokyo (Japan)

    1996-05-01

    Reflection exploration of earthquakes was conducted in the continental shelf off the north-west Australia, and a report is made concerning the processing of the acquired data. A GI gun was used as the vibration source, and a wave quite similar to a pulse was generated. Hydrophones were arranged with group intervals of 12.5m, and high-resolution field data were acquired. An analog low cut filter was used to suppress the large-amplitude swell noise attributable to sea conditions. A digital filter was designed for the purpose of eliminating coherent noises from other survey ships. At the ultimate stage the f-k filter was applied to each of the shot records, and the effectiveness was verified. The traverse line was as long as 6700km and therefore the design window was set relatively long at 2.0-4.0s in the residual static correction phase. It was found that this setup is effective in improving the continuity of the reflection surface. 5 figs., 1 tab.

  11. Time domain electromagnetic method for petroleum exploration. Part 3. Case study in Yoneyama area; Sekiyu tansa ni okeru TDEM ho data shutoku to kaiseki ni tsuite. 3. Niigataken Yoneyama chiiki deno tekiyorei

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, H.; Mitsuhata, Y. [Japan National Oil Corp., Tokyo (Japan); Shiga, N. [Mitsui Mineral Development Engineering Co. Ltd., Tokyo (Japan)

    1996-05-01

    The result is reported of a TDEM method-based survey for oil exploration conducted in the Yoneyama district, Niigata Prefecture. The survey covered the southern part of the sedimentary basin in the prefecture, known for the poor quality of the seismic prospecting data that had been recorded. The purpose of the TDEM method-assisted survey was to probe the high-resistivity volcanic rock structure and low-resistivity sedimentary layer, and to know their details. The obtained data were subjected to interpretation by use of the 1D inversion method. A 4000m-deep level was subjected to interpretation, 34 data were inputted, and the early model consisted of 20 layers. As the result, it was found that there was a high-resistivity layer ranging from the ground surface down to a depth of approximately 500m, that a low-resistivity layer 2500-3000m in thickness lay thereunder, and that the lowest layer had a high resistivity of approximately 100 Ohm m. By comparing these data with the geological structure, structures were disclosed corresponding to the rock bed depth, Ukawa syncline, Ishiguro anticline, and Yoneyama mountain mass. 3 refs., 10 figs., 1 tab.

  12. FY 1997 report on the research study for preparation of NEDO`s vision. Biomass energy; 1997 nendo chosa hokokusho (NEDO vision sakutei ni muketa chosa kenkyu). Biomass energy ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research study was made on the current usage, technological development and future subjects of biomass energy. The current use of biomass energy over the world estimated to be nearly a billion t/y oil equivalent. This value is estimated to be only a part of a pure primary biomass yield of 73 billion t/y oil equivalent showing a large supply potential. The evaluation result of a biomass energy potential in the world by GLUE (Global Land Use and Energy Model) considering worldwide biomass flow and competition of land use showed that no change of land use form in advanced areas is predicted, and no production of new biomass energy from forests in advancing areas is also expected. Production of biomass energy from farm products is promising in advanced areas, while the potential of biomass residue is high in advancing areas showing the possibility of energy development. Development of new biotechnologies such as molecular control of bio-production functions is expected to increase biomass resources. 76 refs., 26 figs., 30 tabs.

  13. Assessment of a Mega-Float on water quality and ecosystem in Tokyo bay; Choogata futaishiki kaiyo kozobutsu ga Tokyowan no suishitsu to seitaikei ni oyobosu eikyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kyozuka, Y.; Hu, C.; Hasemi, H. [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Hikai, A.

    1997-08-01

    The effect on the marine environment in the bay when a Mega-Float is installed in a bay was investigated. The physical process such as a residual flow (including tidal currents, water temperature, salt, density, and density currents), and the ecosystem model for which floating organic matter and plankton are handled were incorporated to develop a program for water quality calculation in a bay. The program was used for Tokyo Bay and compared with the conventional calculation result and the oceanograhpic observation result. Simultaneously, the effect on the Mega-Float was considered. On the flow in Tokyo Bay in summer, the calculation result that comparatively coincided with the observation value in a residual flow level was obtained. The horizontal distribution of COD comparatively coincides with the existing observation result. The influence that the Mega-Float exerts on the flow, water temperature, water quality, and ecosystem in the ambient sea area was little and local in the calculation scale (L {times} B {times} d = 6 km {times} 3 km {times} 2 m) of this time. However, the difference occurring due to the design position must also be investigated in future. 12 refs., 8 figs., 5 tabs.

  14. 冉氏“益气通经”指针结合阿是穴苍龟探穴法治疗慢性非特异性下腰痛%Treatment of Chronic and Non-specific Low Back Pain through“the Rans” Pointer with Ashi Canggui Tanxue Therapy

    Institute of Scientific and Technical Information of China (English)

    滕迎春; 于冬冬; 关伟强; 郑若楠; 路玫

    2013-01-01

    目的:观察冉氏“益气通经”指针法结合阿是穴苍龟探穴针法治疗慢性非特异性下腰痛的临床疗效,为慢性非特异性下腰痛提供新的临床思路和治疗方法。方法:将符合入选标准的慢性非特异性腰痛患者60例,随机分为治疗组和对照组,每组30例,分别采用冉氏“益气通经”指针与阿是穴苍龟探穴针法、常规推拿针刺法,每组各治疗1个疗程,观察临床综合疗效。结果:从临床症状方面评价,冉氏“益气通经”指针结合阿是穴苍龟探穴法均优于常规推拿针刺法。结论:冉氏“益气通经”指针结合阿是穴苍龟探穴法治疗慢性非特异性下腰痛效显便廉,值得临床推广。%Objective:To provide new clinical thinking and therapies through observation of“ the Rans” Pointer with Ashi Canggui Tanxue therapy .Methods:Randomly allocate 60 patients with chronic and non -specific low back pain matched with the inclusion criteria into treatment group and control group ,each group with 30 cases and the treatment group was treated with “the Rans”Pointer with Ashi Canggui Tanxue therapy and the control group received regular massage and acupuncture .Observe the comprehensive clinical effects after one course of treatment in each group .Resulst :Evaluated from clinical symptoms ,“the Rans”Pointer with Ashi Canggui Tanx-ue therapy was superior to the regular massage .Conclusion:The treatment of chronic and non -specific low back pain through “the Rans”Pointer with Ashi Canggui Tanxue therapy is more effective ,convenient and eco-nomical ,and is worth popularizing clinically .

  15. One hundred and twenty cases of migraine treated by acupuncture on Zúlínqì(足临泣 GB 41)and bloodletting therapy on Ashi points%针刺足临泣配阿是穴放血治疗偏头痛120例

    Institute of Scientific and Technical Information of China (English)

    王俊富; ZHANG Yi

    2010-01-01

    @@ Migraine is a frequently encountered disease which may affect the work,study and daily life of the patient.It is proved of little avail of treatments with medication,acupuncture or other therapies on most of the patients.With high ratio of recurrence,it is very difficult to be completely cured.The author of the article has treated 120 cases of migraine with acupuncture on Zúlínqì(足临泣GB 41)and bloodletting therapy on Ashi points.The experience is now shared as the follows.

  16. Accident reconstruction to analyze impact of injured drivers during the collision. Ankle fracture in the car-to-car offset frontal collision; Join no jusho jokyo ni kansuru jiko saigen. Joyosha doshi no offset zenmen shototsuji no ashi kansetsu kossetsu

    Energy Technology Data Exchange (ETDEWEB)

    Sakurai, M. [Japan Automobile Research Institute Inc., Tsukuba (Japan)

    1997-10-01

    An accident reconstruction test of car-to-car crash was conducted in order to analyze the impact on the driver in the offset head-on collision. The ankle fracture of the driver resulting from the accident was examined with the test results and the accident data. The test results of the car-to-car crashes indicated that the belted driver`s ankle would have fractured in the early stage of the crash. The detailed information from the accident data, especially the cars` interior deformation and the driver`s X-ray photographs, was also very important in analyzing injury mechanisms of the ankle/foot region. The above results suggested an injury mechanism that the ankle joint fracture was due to dorsiflexion and valgus resulting from the impact and intrusion of the toeboard in the early stage of the crash. 12 refs., 11 figs.

  17. 针刺阿是穴配合艾灸热敏化腧穴治疗项背肌筋膜疼痛综合征临床随机对照观察%Clinical Randomized Controlled Trials of Treatment of Neck-back Myofascial Pain Syndrome by Acupuncture of Ashi-points Combined with Moxibustion of Heat-sensitive Points

    Institute of Scientific and Technical Information of China (English)

    吴峰; 康明非; 熊鹏; 熊俊

    2011-01-01

    Objective To observe the therapeutic effect of acupuncture of Ashi points in combination with moxibustion of heat-sensitive points for neck-back myofascial pain syndrome, so as to find a better combined therapy. Methods A total of 62 eligible patients were randomly divided into treatment group (acupuncture of Ashi-points plus moxibustion of heat-sensitive points,n =32) and control group (acupuncture of Ashi-points plus TDP irradiation, n = 30) by using single-blind method. Ashi-points were the tenderpoints or subcutaneous induration spots determined by digital pressure in the focus region, and the heat-sensitive points were the acupoints around the subcutaneous induration spots in the neck-back regions determined by patients' feeling (heat from the ignited moxa transmitting toward the deep muscle layer, extending toward the surrounding region of the Ashi-points, etc.and the distal part of the body) during moxibustion. Ashi-points were punctured with filiform needles and stimulated with reducing method by lifting, thrusting and twirling the acupuncture needle repeatedly till "Deqi", followed by retaining the needle for 30 min.Moxibustion was given to the patients for 10- 90 min (when the patient began to feel heat penetrating into the deeper muscle layer to the termination of the heat transmission). TDP irradiation was given to the Ashi-points for 30 min in every session of treatment.The treatment was conducted once daily, 5 times a week, two weeks altogether. McGill pain questionnaire containing pain rating index (PRI), visual analogue scale (VAS) and present pain intensity (PPI) and "the criteria for assessing the therapeutic effect of back-myofascitis" recorded in "Standards for Diagnosis and Efficacy Evaluation of Clinical Conditions in Chinese Medicine"( published in 1994 in China) were used to evaluate the analgesic effect. Results Before the treatment, no significant differences were found between the treatment and control groups in PRI, VAS and PPI. After

  18. Source Apportionment of Non-point Source Nitrogen Pollution in Ashi River Basin Usingδ15N Technique%阿什河流域非点源氮污染的δ15N源解析研究

    Institute of Scientific and Technical Information of China (English)

    胡钰; 王业耀; 滕彦国; 香宝; 马广文; 方广玲

    2015-01-01

    农业活动往往沿着河流而发展,其产生的氮污染极大地影响了流域水质量。选择以种植业为主的阿什河作为典型流域,利用水质、土壤监测技术和15N稳定同位素示踪技术,对流域水体氮污染、种植业土壤氮特征以及氮污染来源进行解析。结果表明阿什河水质总氮浓度较高,氮污染较严重;位于上游的采样点水质较好,中游开始到下游水质逐渐恶化。种植业对于流域水体氮污染的影响根据水期以及种植周期的不同而有着不同的影响方式:平水期以种植业非点源氮污染为主要污染源的区域主要分布在中下游处,其δ15N值为0.46%~0.77%,表现为人工合成化肥和农田退水造成的土壤有机氮污染;丰水期以种植业非点源氮污染为主要污染源的区域较多,其δ15N值集中在0.19%~0.40%;上游地区以人工合成化肥为主要污染源,中下游以雨水及灌溉冲刷种植区土壤而形成的土壤有机氮来源为主。枯水期也有部分地区受到以人工合成化肥为主要污染源的氮污染,其δ15N值为0.11%~0.38%,主要是由于雨季人工合成化肥中的硝态氮下渗到土壤下层,当枯水期时地下径流补给河流,其中滞留的硝态氮对河水造成污染。%Crop farming activities along river have significantly affected the quality of river water. In this paper, nitrogen pollution in river water basin, nitrogen characteristics in crop farming soil and nitrogen pollution origins were investigated in the Ashi River basin, using water quality and soil monitoring techniques as well as 15N stable isotope. Results showed that there were high nitrogen concentrations in Ashi River water. The water quality was relatively good in the upstream section of the river, but gradually became worse in the midstream and downstream sections. This pattern is closely related to the land use types and human activities. The impacts of

  19. 深刺夹脊穴结合浮刺阿是穴治疗胸腰段带状疱疹后遗神经痛%Jiaji Point Deep Needing Combined with Ashi Point Superficial Needling for Thoracolumbar Post-zoster Neuralgia

    Institute of Scientific and Technical Information of China (English)

    范春玲; 邹伟; 于学平; 孙晓伟

    2014-01-01

    Objective:To observe the clinically therapeutic effect of Jiaji point deep needing combined with Ashi point superficial needling on residual neuralgia thoracolumbar of herpes zoster (HZ).Methods:A total of 47 cases of thoracolumbar HZ outpatients were randomized into treatment group (24 cases) and control group (23 cases).For pa-tients in the treatment group ,deep needing was applied to Jiaji point and superficial needling was applied to Ashi point.For Patients in the control group , routine acupuncture was applied to Jiaji point .Then compare the results of the two groups .Results:After one course of treatment , the cure and effective rate in the treatment group was 87.50%and control group was 47.82%.The effectiveness of treatment group is better (P<0.05).Conclusion:It is more ef-fective and safer for Jiaji point deep needling combined with Ashi point superficial needling on residual neuralgia of thoracolumbar herpes zoster .%目的:观察深刺夹脊穴结合浮刺阿是穴法治疗胸腰段带状疱疹后遗神经痛( PHN)的临床疗效。方法:将47例胸腰段带状疱疹后遗神经痛患者随机分为治疗组24例,采用深刺夹脊穴、浮刺阿是穴法治疗,对照组23例,采用常规针刺夹脊穴治疗,比较临床疗效。结果:治疗组带状疱疹后遗神经痛的愈显率为87.50%,优于对照组的47.82%(P<0.05)。结论:深刺夹脊穴结合浮刺阿是穴治疗胸腰段带状疱疹后遗神经痛疗效较佳,安全性高。

  20. On the dynamic behavior of a wind turbine-generator system with a Darrieus-Savonius hybrid wind turbine; Hybrid furyoku turbine wo mochiita furyoku hatsuden system no kyodo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Wakui, T.; Tanzawa, Y.; Hashizume, T.; Ota, E. [Waseda University, Tokyo (Japan). School of Science and Engineering; Terashima, Y.; Machiyama, T. [Nippon Institute of Technology, Saitama (Japan)

    1997-03-25

    In order to clarify the dynamic characteristics of a self-controlled Darrieus-Savonius hybrid wind turbine system, a system consisting of a hybrid wind turbine and an AC generator was tested under various wind conditions in the wind tunnel. We took up four types of wind blowing change for the test; ramp, sinusoidal and square wind velocity changes and a similar wind velocity change to the field wind. A series of tests substantiated the effectiveness of our operating scheme wherein the tip speed ratio is maintained at a constant value. On the other hand, theoretical studies have been carried out on the characteristics of the system. A simulation model is presented in order to describe the system characteristics not only for the steady-state behavior but also for the dynamic behavior. In spite of its simplicity, the model can predict both characteristics of the system well. The appropriateness of the simulation model is confirmed by comparing with the experimental results. -In addition, the field test data are discussed. As a result, it is confirmed that the system is operated and controlled satisfactorily in the field. 14 refs., 19 figs., 3 tabs.

  1. Design of the control system for fixed-point keeping in FPSO (Floating Production Storage and Offloading); FPSO no teiten hoji no tame no seigyokei no sekkei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kijima, K.; Murata, W.; Furukawa, Y. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1997-10-01

    The control system for keeping the fixed-point of ships against disturbance was designed by applying an ILQ (Inverse Linear Quadratic) control (possible to specify the response of controlled systems with time constant) theory, to study the effect of different time constants as design parameter on a fixed-point keeping performance. It was assumed that the controlled ship is equipped with two bow thrusters and one stern thruster of 30ton in output to generate a control force. For fixed-point keeping control, the state equation was derived to slave the controlled system to a target input. The ILQ design method uses the result of the inverse problem of optimum regulators. For designing control systems by using the ILQ control theory, the smallest time constant should be selected according to the most severe disturbance condition considering the response performance of controllers, to achieve fixed-point keeping of ships. In fixed-point keeping, it is also essential to put the initial position as close as possible to the target point. 2 refs., 6 figs., 2 tabs.

  2. Base isolation system for earthquake protection and vibration isolation of structures. (Part 10). ; Vibration isolation chracteristics of Toshin 24 Omori building. Tatemono no menshin boshin koho no kenkyu kaihatsu. 10. ; Toshin 24 Omori building no boshin seino ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Ando, K. (Kajima Corp., Tokyo (Japan))

    1991-10-31

    As a part of the development of base isolation systems for earthquake protection of structures, the result of railway vibration measurements was reported of a 9-story base-isolated building along a railway. Isolation characteristics of railway vibration were measured in several stages of construction for 2.5 years from planning to completion of the building to determine the followings; the difference between measured vibration isolation data and those estimated from vibration accelerations on the ground, the loss of vibration input into the building, the difference between vibration responses of the same floor in the intermediate stage and final stage of construction, and the effect of studs and dampers. As a result, although the base isolation system slightly multiplied 10-13 Hz components of vibration acceleration, it greatly reduced those at higher frequencies indicating to be effective preventive measures of solid sound. The estimated vibration isolation data well agreed with measured ones permitting to propose an estimation method. 11 refs., 19 figs.

  3. Resolution of digital servo control system using single-bit digital signal processing; 1 bit digital shingo shori wo mochiita seigyo no bunkaino to johoryo ni tsuite no simulation

    Energy Technology Data Exchange (ETDEWEB)

    Tojo, K.; Kurosawa, M.; Oka, K.; Higuchi, T. [The University of Tokyo, Tokyo (Japan)

    1998-05-01

    The application of single-bit digital signal processing to mechanical control system has already been proposed by the authors. Multi-bit A/D converter has been improved to the high level. But it is difficult to make more high resolution A/D by latest semiconductor technologies. There is single-bit digital signal which is generated by a delta-sigma modulator. Single-bit digital signal has small quantized error around low frequency. Then with this single-bit digital signal processing, high resolution on controlling such a narrow band width mechanical system will be realized. In this paper, resolution of analog, multi-bit and single-bit control systems are estimated with simulation. According to simulations` results, single-bit control system has higher resolution than multi-bit system in the condition of equal bit rate. 5 refs., 17 figs., 1 tab.

  4. Kawasaki KJ type high pressure and high temperature soda recovery boiler; Kawasaki KJ gata koatsu koon soda kaishu boiler ni tsuite (kihon concept to Nihon seishi Iwakuni kojo eno nonyurei)

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, T.; Masuda, T. [Kawasaki Heavy Industries, Ltd., Kobe (Japan)

    1997-09-01

    This paper summarizes one of the world`s largest soda recovery boilers installed at a paper mill. The following attention has been paid in designing the boiler: a new four-stage air charging method was adopted referring to the result of thermal fluidity analysis; fixed type distance pieces were adopted for arranging the overheater pipes upon having performed stress analysis to verify its safety; low-pressure four-face spray of black liquor is a feature of this boiler, whereas reduced carryover in the combustion chamber was verified as a result of adopting this feature; the overheater is characterized by employment of slanted roof, provision of measures against dust troubles, and installation of three reduced temperature water injectors and a slag screen; prevention of dust blocking in the boiler body groups and reduction of draft loss in the fuel economizer are also considered; the combustion chamber and the overheater are improved of durability because of using adequate materials; and attention paid on the system includes installation of a circulation line for the black liquor system, a sludgeless agitator for the green liquor system, VVVF control of the air system, and an electric dust collector for the exhaust gas system. The operation result was found good in all respect. 3 refs., 12 figs., 3 tabs.

  5. Wetting on a plate with three-dimensional random heterogeneity and roughness. Equilibrium state and contact angle observed macroscopically; Sanjigen random na seijo wo motsu kotaimenjo deno nure kyodo. Energy heiko joken to kyshitekina sesshokukaku no kankei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kato, K.; Azuma, T. [Osaka City Univ., Osaka (Japan)

    1999-11-25

    A theoretical study was conducted to investigate the wetting behavior of liquid meniscus on a vertical plate with three-dimensional random characteristics of heterogeneity and roughness. The thermodynamic stable condition was derived by considering the minimum of system free energy. The local stable condition leads to a result similar to that obtained for a plate with two-dimensional characteristics, i.e., the system has many meta-stable states. For the stable condition of the whole system, a relation was derived between macroscopically observed contact angle and the surface characteristics. The product of cosine of the contact angle and liquid surface tension is equal to the energy difference for the liquid to wet the plate by apparent unit area. If the liquid wets the solid surface reversibly, there is only one contact angle observed macroscopically. This fact suggests that the contact angle hysteresis is caused by the irreversible motion when the liquid advances or recedes on the solid surface. The well-known Cassie and Wenzel's contact angles are explained as those corresponding to thermodynamically stable condition when the liquid wets the solid reversibly. (author)

  6. Flexible intelligence remote diagnostic decision system using fuzzy technology. Advancement of diagnostic decision for computers; Fuzzy gijutsu wo oyoshita remote kosho shindan system. Computer kosho shindan no koseinoka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Yokota, A.

    1996-06-01

    AV/Alert system of U.S. Data General Co. (DGC) is a system which performs the remote trouble response to UNIX servers of DGC. As the diagnostic decision has provided low accuracy, highly skilled field engineers have been required. Accordingly, the enhancement of accuracy in the diagnostic decision has been strongly required. For the purpose of drastic improvement in accuracy of the diagnostic decision without experts utilizing fuzzy technology, a flexible intelligence diagnostic decision system (FI-DDS) of AV/Alert has been developed. The FI-remote-DDS is composed of AV/Alert, FI-DDS, and an automatic accumulation software for accident examples. The FI-DDS has made the diagnostic decision engine of AV/Alert highly accurate. The automatic accumulation software for accident examples provides accident examples and statistic data of accident examples required by FI-DDS, automatically. The system was found to be extremely useful from the analytic results of error code and factors using about 400 actual accident example data in the past. 4 figs.

  7. Effect of deep structure and surface layer (a) simulation study on the heavy damage belt of the 1995 Hyogoken Nanbu earthquake; Hado simulation wo mochiita `shinsai no obi` ni tsuite no kento

    Energy Technology Data Exchange (ETDEWEB)

    Feng, S.; Ishikawa, K.; Kaji, Y. [Chuokaihatsu Corp., Tokyo (Japan)

    1996-05-01

    A simulation study was done to identify the causes for the so-called heavy damage belt observed as a result of the Hyogoken Nanbu Earthquake. This study determines distributions of the maximum amplitudes on the ground surfaces, and discusses the effects of deep structures and low-velocity surface layers, based on the simulation by the wave equation with the underground model of Higashinada-ku and its vicinity in the north-south direction, observed seismic records and artificial waves. The two-dimensional scalar wave equation is used for the analysis. The velocity structure model used for the simulation is established, based on the elastic wave seismic survey results. The focus function is drawn by expanding or contracting the time scale, using the seismic records at Kobe Port Island and artificial waves. The analysis results show that the damage belt coincides with the areas at which the focusing zone of the deep structure overlap the amplification zone in the low-velocity ground surfaces, where relative density is amplified 1.5 to 2 times. It is also observed that large peaks repeat 2 to 3 times on the time scale. 5 refs., 8 figs., 1 tab.

  8. Study on stability and controllability of high-speed tracked vehicles. ; Linear model and response characteristic. Kosoku soki sharyo no sosa anteisei ni tsuite. ; Senkei model to oto tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Kitano, M.; Watanabe, K.; Nagatomo, N. (National Defence Academy, Kanagawa, (Japan))

    1990-04-01

    The study on the steerability and stability of tracked vehicles is carried out by a linear equation of motion. In order to comprehend systematically the characteristic of motion of tracked vehicles, a linear equation of motion was developed from the conventional non-linear equation. With clarifying the applicable linear range, the validity of the linear model was confirmed by numerical results of the non-linear model and experimental results by using a scale model. It became clear that the motion of tracked vehicles was comprehended through this linear model, and that the motion was stable under some range of vehicle-speed and steering-ratio, because the response of the motion was damped without oscillation. In addition, it became clear through the simulation of transient and frequency responses that for improvement of the dynamics of a high-speed tracked vehicle, increase of the friction coefficient between the track and ground or appropriate selection of steering frequency was very important. 5 refs., 12 figs., 1 tab.

  9. Chemical and geochemical study on the hot spring. Dogo onsen no fussoion no kigen ni tsuite; Onsen no chikyu kagakuteki kenkyu. The origin of fluoride in Dogo spring group Ehime Prefecture, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Maki, T.; Tagashira, K.; Inoue, S.; Takechi, T. [Ehime Prefectural Inst. of Public Health, Ehime (Japan)

    1997-03-31

    Leaching experiments of fluoride ion (F{sup -}) from CaF2 in the solution of CaCl2 (Ca{sup 2+}) and Na2CO3 (CO3{sup 2}) as well as leaching experiments from typical granite in Ehime Prefecture and boring cores obtained at Dogo spa were carried out. Concentration of F{sup -} in water could be controlled by varying the concentrations of Ca{sup 2+} and CO3{sup 2-}. As a result, a relational equation of [Ca{sup 2+}][F{sup -}]{sup 2} = 10{sup -10.39} was obtained. As a result of the leaching experiments of granite and boring core of Dogo spa, high concentration F{sup -} was leached. The leaching of F{sup -} from granite had positive correlation with CO3{sup 2-} and negative correlation with Ca{sup 2+} in the solution, and the concentration was controlled to some extent. Granite and biotite supplied F{sup -} to hot spring water, and had a property of adsorbing Ca{sup 2+} in the hot spring water. Water soluble F{sup -} compound produced from volatile component of magna was assumed to contribute greatly to the origin of F{sup -} supply to hot spring water from granite. 8 refs., 12 figs., 3 tabs.

  10. Three dimensional flow analysis in a radial turbine rotor. 2nd Report. Flow field near tip clearance and turbine efficiency; Radial turbine nai nagare no sanjigen suchi kaiseki. 2. Yokutan sukima kinbo no nagare to turbine koritsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tsuchiya, N. [The University of Tokyo, Tokyo (Japan); Yoshiki, H. [The University of Tokyo, Tokyo (Japan). Institute of Industrial Science

    1999-08-25

    Three dimensional viscous flow analysis was performed in a radial turbine rotor. Tip clearance area was filled with another computational grid and multi-block analysis code was adopted. Clearance height was changed from 0 mm to 1 mm to investigate its influence to leakage flow and turbine efficiency. The results showed that flow field near tip clearance was mainly decided by relation between scraping flow and leakage jet. Leakage mass flow increased greatly at the latter half of rotor passage. Turbine efficiency tended to improve as tip clearance became small. Especially good improvement was found between 0.5 mm and 0.25 mm. It may be cause that scraping flow was dominant at the middle of rotor passage. (author)

  11. Application of the 'fingerprint' geochemical method in a geothermal exploration survey of the Sumikawa area. Fingerprint ho no chinetsu tansaho to shite no yukosei ni tsuite (Akitaken sumikawa chiku deno chosarei)

    Energy Technology Data Exchange (ETDEWEB)

    Noda, T.; Takahashi, M.; Shigeno, H. (Geological Survey of Japan, Tsukuba (Japan))

    1992-06-15

    This paper presents an affirmative conclusion on the effectiveness of a Fingerprint method as a method to explore geothermal sources based on results of the survey conducted in the Sumikawa Area in Akita Prefecture. The soil gas samples from the area are classified into clusters of three kinds according to patterns in the mass spectra, and four types according to characteristics of the highly divergent components. It is shown that a distribution chart of the samples belonging to each type classified in the survey area presents a distribution that expresses well significantly the degree of activeness in geothermal activities Also shown is that the areas in which the samples of each type exist can be distinguished without a duplication a chart plotting the relationship between a total gas divergent amount'' and an average gas mass number'' by samples (a gas characteristics identifying chart). It is further indicated that the type classification according to highly divergent components and the cluster classification based on the mass spectra patterns result in a conclusion that the classifications have similarity in their descriptions. 17 refs., 11 figs., 4 tabs.

  12. Optimization of dynamic source depth for seismic surveys. Part 7; Dynamite shingen no hasshin shindo no saitekika ni tsuite (hyoso kozo no suitei (kusssetsuho jishin tansa oyobi denki denjiho tansa)). 7

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, H.; Murayama, R.; Mitsuhata, Y.; Ishikawa, H. [Japan National Oil Corp., Tokyo (Japan). Technology Research Center

    1996-05-01

    For the improvement of quality of data collected by reflection aided seismic exploration using dynamite as the seismic source, information has to be collected about the surface layer structure before the charge depth is determined. For this purpose, refraction, electric, and electromagnetic exploration methods were tried. In the refraction method, an impactor was used as the seismic source. In the records, the surface wave prevails because vibration was generated on the surface. Analysis was made by the use of the initial travel time tomography. In the electric exploration, a double pole array was used to measure resistivity. The measured data was subjected to a fully automatic inversion for analysis. As the result, it was disclosed that it was useful to know the deep-level structure directly by use of tomographic methods in refraction seismic exploration so as to find the optimum charge level. Furthermore, about the electric and electromagnetic exploration techniques, it was found that these methods can be applied making use of resistivity to the evaluation of groundwater saturation. 7 refs., 5 figs., 3 tabs.

  13. On the wave induced responses for a high-speed hydrofoil catamaran. Part 2. Cabin connected to hull by spring and response to vibration; Suichuyokutsuki kosoku sodotei no harochu oto ni tsuite. 2. Dokuritsu kozogata cabin to yodo oto

    Energy Technology Data Exchange (ETDEWEB)

    Nobukawa, H.; Kitamura, M.; Kawamura, T. [Hiroshima University, Hiroshima (Japan). Faculty of Engineering

    1996-04-10

    A high-speed hydrofoil catamaran under development has such a structure that an independent cabin is mounted on catamaran hulls, the cabin is connected with the hulls by using four soft springs, and hydrofoils are attached to the front and rear of the cabin. The structural design conception was as follows: the self-weight of the cabin is supported by lifting power of the hydrofoils while the boat is cruising; longitudinal motions of the catamaran hulls are absorbed by soft spring struts to make the motions more difficult to be transmitted into the cabin; and vibration excited by engines rotating at high speeds, attached to rear of the catamaran hulls, is not transmitted directly to the cabin structurally. A towing experiment was carried out by using divided models of about 1/10 scale in counter waves and regular waves to investigate their vibration response characteristics in waves. Furthermore, an experimental boat made of aluminum alloy with about 1/3 scale of the design boat was attached with composite structural struts made of springs and rubber parts to perform cruising experiments on an actual sea area. As a result, it was found that vibration excited by main engines in the catamaran hulls is transmitted very little to the cabin. 2 refs., 10 figs., 1 tab.

  14. On the fault system and basement structure in and around the epicentral region of the 1995 Hyogo-ken Nanbu earthquake; 1995 nen Hyogoken nanbu jishin shingen shuhen no danso kiso kozo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Yokokura, T.; Kano, N.; Yamaguchi, K.; Miyazaki, T. [Geological Survey of Japan, Tsukuba (Japan); Ikawa, T.; Ota, Y.; Kawanaka, T. [Japex Jeoscience Institute, Tokyo (Japan)

    1996-05-01

    A reflection elastic wave seismic survey was carried out as part of the emergency survey of active faults in relation with the Hyogo-ken Nanbu Earthquake. This paper presents an interim report on the survey covering a wide area with deep structure as the survey object. The paper mentions that processing the survey data has been nearly completed, and is in the stage of making analyses and interpretations of the result of the processing, and that the survey was an attempt of making a unified survey over land areas, shallow sea areas, and seas by setting twelve traverse lines in and around the epicenter region. The paper also introduces briefly what has been found on hypocenters used, vibration receivers, vibration intervals, and CPD intervals, and on shapes of faults, particularly the continuity (the relationship of the Ashiya fault, Koyo fault and Osaka bay fault with the above two faults, branching of the Osaka bay fault, faults between the Wada promontory fault, Awaji Island and the Osaka bay fault, the fault off the east coast at the central part of Awaji Island, the Shichiku fault on the west coast of Awaji Island, and the basement fault). Mention is given also on the basement structure chart of the Osaka bay prepared preliminarily for the purpose of reference. 2 figs.

  15. Application of a temperature selective heat storage tank to a solar system. Part 3. Solar heat collecting system; Ondo sentaku chikunetsuso no solar system eno tekiyo. 3. Shunetsu hoshiki ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kamiya, Y. [Kanto Gakuin University, Yokohama (Japan); Kanayama, K. [Kitami Institute of Technology, Hokkaido (Japan)

    1996-10-27

    The tank system and tank-less system when the temperature selective heat storage tank is applied to a solar system were considered. In the tank system, the simulation shows that the annual supplementary heat consumption is reduced as the tank capacity becomes lower. The most suitable operating time set for determining the reference time is about five hours in winter and about nine hours in summer. The annual operating time is about 6.5 hours. In the tank-less system, the most suitable minimum flow rate per solar collector area of a heating medium in Tokyo and its districts is 10 L/hm{sup 2} for both three-step flow control and constant flow control. The tank-less system is slightly lower in annual supplementary heat consumption than the tank system. For the three-step flow control, a change in the annual supplementary heat consumption is lower than that in the minimum flow rate. For the constant flow control, however, the annual supplementary heat consumption rapidly increases when the flow rate more decreases than the optimum value. The number of pump start/stop counts for the three-step flow control is less than two times as high as for the constant flow control. 4 refs., 6 figs., 1 tab.

  16. Study on wind turbine for Yamagata wind energy institute. Comparison of the actual and estimate values for electric power; Yamagata furyoku hatsudensho no fusha ni tsuite. Hatsudenryo yosoku to jissekichi no hikaku

    Energy Technology Data Exchange (ETDEWEB)

    Nagai, H. [Nihon University, Tokyo (Japan); Kojima, T. [Yamagata Wind Energy Institute, Yamagata (Japan)

    1996-10-27

    For two 400kW wind turbines erected in Jan. 1996 of Yamagata Wind Energy Institute, their estimated power output was compared with actual output for 7 months. AMeDAS data in 1985-94 were totaled every month to use as basic data. The altitude and surface roughness model necessary for WAsP analysis recommended by NEDO`s wind condition close inspection manual were prepared using 1/25,000 maps and aerial photographs. The obstacle model for estimating wind conditions at height of the wind turbine was prepared using the data obtained by field survey. Mean wind velocity and latent energy were determined by statistical analysis of wind velocity occurrence relative frequencies and Weibull distribution parameters. The power output of 717,700kWh was obtained for 7 months, which is equivalent to 88.5% of the estimated output of 810,730kWh for the same period. It was clarified from obtained characteristic wind conditions at the site that the wind power generation is promising at the site not only in winter but also in summer. Although the test period was too short, this method was effective as analytical method of output estimation in the planning stage of wind turbines. 3 refs., 8 figs., 4 tabs.

  17. Clinical observation on treatment of the Lateral Epieondylitis by fire needling the Back-shoulder three-points and elbow A-shi points%肩背三穴及肘部阿是穴火针治疗肱骨外上髁炎的临床观察

    Institute of Scientific and Technical Information of China (English)

    黄捷佳

    2015-01-01

    目的:观察肩背三穴(膏肓、天宗、臑俞)及肘部阿是穴火针治疗肱骨外上髁炎的临床疗效。方法:将90例符合纳入标准的肱骨外上髁炎患者随机分为肩背三穴及肘部阿是穴火针治疗组45例和肘部火针治疗组45例,3次为1个疗程,2个疗程结束后进行疗效评估。结果:治疗组治愈率为84.5%,总有效率为97.8%;对照组治愈率为48.9%,总有效率为86.7%;平均治疗次数分别为(3.255±1.223)和(5.243±1.134),经统计学处理,两组疗效差异具有统计学意义(P<0.05)。结论:肩背三穴及肘部阿是穴火针治疗肱骨外上髁炎是较理想的治疗方法。%Objective To observe the therapeutic effect of the treatment on Lateral Epieondylitis by fire needling the Back-shoulder three-points(BL43、S110、S111)and elbow A-shi points.Methods: Ninety cases meeting inclusion criteria were randomly divided into the treatment group(n=60) and control group(n=60) . The treatment group were treated by fire needling the Back-shoulder three-points and elbow A-shi points and the control group were treated by fire needling the elbow A-shi points, 3 times as one course. Two groups were assessed by the evaluation of curative effect after two courses of treatment.Results: The cure rate and the total efficacy rate in the treatment group were 84.5% and 97.8%and respectively 48.9% and 86.7% in the control group. The average treatment times were 3.255±1.223 and 5.243±1.134 for curative group and treatment group respectively. It showed a significant difference in curative effect and treatment times between the two groups (P<0.05).Conclusion: The treatment by fire needling the Back-shoulder three-points)and elbow A-shi points is an better approach for the Lateral Epieondylitis.

  18. Clinical Efficacy on Knee Osteoarthritis Treated with Ashi Points Based on the Evaluation of Musculoskeletal Ultrasound Technology%基于肌骨超声技术评价循经筋阿是穴治疗膝骨性关节炎的临床疗效观察

    Institute of Scientific and Technical Information of China (English)

    张文静; 刘志成; 高玉; 宋杰; 王禹; 董宝强

    2014-01-01

    Objective To observe the efficacy on knee osteoarthritis(KOA)treated with acupunc-ture at Ashi points along meridian muscle regions on the basis of evaluation of musculoskeletal ultrasound technology.Methods One hundred and fifty patients were randomized into a traditional meridian point group (group A),an Ashi points of meridian muscle regions group(group B)and a combined group of meridian points and Ashi points(group C).Additionally,a healthy control group was prepared.In the group A,acu-puncture with the filiform needles was applied to meridian points.In the group B,after meridian muscle region and pattern/syndrome differentiation,Ashi points at knee were selected for acupuncture,8 to 1 0 Ashi points around knee joint were used in each treatment.In the group C,the therapies of the group A and group B were combined.VAS and WOMAC changes were recorded before and after treatment in the patients.Simultaneous-ly,the musculoskeletal ultrasound examination was applied to the foci.Results Regarding VAS comparison, the difference was significant between the group A and the group B,and between the group A and the group C (P0.05).The chan-ges were obvious in the foci before and after treatment in each group in musculoskeletal ultrasound examina-tion at each observation point(P<0.05 ).The larger scope of foci changed more apparently in the group A and the group B as compared the group C(P<0.05).A part of changes in the group A was more apparent as compared with the group B(P<0.05).Conclusion Acupuncture at Ashi points along meridian muscle re-gions and the meridian points achieves the good efficacy on KOA.The musculoskeletal ultrasound technology brings a certain role in the efficacy evaluation of KOA.%目的:采用基于肌骨超声技术评价观察针刺循经筋阿是穴治疗膝骨性关节炎的疗效。方法将150例患者随机分成传统经穴组(经穴组)、循经筋阿是穴组(经筋辨证组)和经穴结合循经筋阿是穴组(结合组),

  19. The exchange bias effect in Ni/NiO and NiO nanoparticles

    Science.gov (United States)

    Kou, Angela; Feygenson, Mikhail; Kreno, Lauren; Patete, Jonathan; Tiano, Amanda; Zhang, Fen; Wong, Stanislaus; Aronson, Meigan

    2009-03-01

    We used magnetic measurements, X-ray diffraction, and HRTEM to study the exchange bias field in Ni/NiO and NiO nanoparticles made by a modified wet chemistry method. We oxidized re-dispersed powders of bare Ni nanoparticles in air at 400^oC and 900^oC. HRTEM showed that annealing at 900^oC of bare Ni nanoparticles led to the formation of exceptionally high quality NiO nanoparticles, resembling perfect bulk-like crystalline order. To our knowledge, there are no reports of NiO particles of such quality in the literature. The loop shift was 1000 Oe at 300K for the NiO nanoparticles, while it was only 120 Oe at 10K for the Ni/NiO nanoparticles. The difference is explained by the different origins of the loop shift in Ni/NiO and NiO nanoparticles. In Ni/NiO nanoparticles, the loop shift is associated with exchange interactions between ferromagnetic Ni and antiferromagnetic NiO. In NiO nanoparticles, however, the origin of the shift is an uneven number of ferromagnetic sublattices present in NiO nanoparticles, which interact differently with an applied magnetic field (Kodama, 1999).

  20. Bridging exchange bias effect in NiO and Ni(core)@NiO(shell) nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Rinaldi-Montes, Natalia, E-mail: nataliarin@gmail.com [Departamento de Física, Universidad de Oviedo, E-33007 Oviedo (Spain); Gorria, Pedro [Departamento de Física & IUTA, EPI, Universidad de Oviedo, E-33203 Gijón (Spain); Martínez-Blanco, David [Servicios Científico-Técnicos, Universidad de Oviedo, E-33006 Oviedo (Spain); Fuertes, Antonio B. [Instituto Nacional del Carbón, CSIC, E-33080 Oviedo (Spain); Fernández Barquín, Luis [CITIMAC, Facultad de Ciencias, Universidad de Cantabria, E-39005 Santander (Spain); Puente-Orench, Inés [Instituto de Ciencia de Materiales de Aragón, CSIC-Universidad de Zaragoza and Institut Laue-Langevin, BP 156, F-38042 Grenoble Cedex 9 (France); Blanco, Jesús A. [Departamento de Física, Universidad de Oviedo, E-33007 Oviedo (Spain)

    2016-02-15

    Among all bi-magnetic core(transition metal)@shell(transition metal oxide) nanoparticles (NPs), Ni@NiO ones show an onset temperature for the exchange bias (EB) effect far below the Néel temperature of bulk antiferromagnetic NiO. In this framework, the role played by the magnetism of NiO at the nanoscale is investigated by comparing the microstructure and magnetic properties of NiO and Ni@NiO NPs. With the aim of bridging the two systems, the diameter of the NiO NPs (~4 nm) is chosen to be comparable to the shell thickness of Ni@NiO ones (~2 nm). The EB effect in Ni@NiO NPs is attributed to the exchange coupling between the core and the shell, with an interfacial exchange energy of ΔE~0.06 erg cm{sup −2}, thus comparable to previous reports on Ni/NiO interfaces both in thin film and NP morphologies. In contrast, the EB detected in NiO NPs is explained in a picture where uncompensated spins located on a magnetically disordered surface shell are exchange coupled to the antiferromagnetic core. In all the studied NPs, the variation of the EB field as a function of temperature is described according to a negative exponential law with a similar decay constant, yielding a vanishing EB effect around T~40–50 K. In addition, the onset temperature for the EB effect in both NiO and Ni@NiO NPs seems to follow a universal dependence with the NiO crystallite size. - Highlights: • Comparison of the exchange bias effect in NiO and Ni(core)@NiO(shell) nanoparticles. • Universal temperature dependence of the exchange bias effect. • Suggested similar physical origin of the effect in both systems. • Size and crystallinity of the NiO shell hold the key for exchange bias properties.

  1. OpenNI cookbook

    CERN Document Server

    Falahati, Soroush

    2013-01-01

    This is a Cookbook with plenty of practical recipes enriched with explained code and relevant screenshots to ease your learning curve. If you are a beginner or a professional in NIUI and want to write serious applications or games, then this book is for you. Even OpenNI 1 and OpenNI 1.x programmers who want to move to new versions of OpenNI can use this book as a starting point. This book uses C++ as the primary language but there are some examples in C# and Java too, so you need to have about a basic working knowledge of C or C++ for most cases.

  2. Magnetic Properties of Ni Nanoparticles and Ni(C) Nanocapsules

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Structure and magnetic properties of Ni nanoparticles and Ni(C) nanocapsules were studied. The carbon atoms hardly affect the lattice of Ni to form Ni-C solid solution or nickel carbides. The large thermal irreversibility in zerofield-cooled and zero-field magnetization curves indicates magnetic blocking with a wide energy barrier. Saturation magnetization, remanent magnetization and coercivity of Ni(C) nanocapsules decrease with increasing temperature.

  3. Observations on the Efficacy of Acupuncture plus Ashi Point Pricking Bloodletting in Treating Acute Gouty Arthritis%针刺配合阿是穴刺络放血治疗急性痛风性关节炎疗效观察

    Institute of Scientific and Technical Information of China (English)

    徐颖; 黄微珍; 李斌

    2016-01-01

    目的:针刺配合阿是穴放血治疗急性痛风性关节炎的临床疗效。方法将70例急性痛风性关节炎患者随机分为治疗组38例和对照组32例。治疗组采用针刺配合阿是穴刺络放血治疗,对照组采用常规药物治疗。观察两组治疗前后血尿酸及C反应蛋白含量变化情况,比较两组临床疗效。结果两组治疗1、2个疗程后血尿酸及C反应蛋白含量与同组治疗前比较,差异均具有统计学意义(P<0.01)。治疗组治疗2个疗程后C反应蛋白含量与对照组比较,差异具有统计学意义(P<0.05)。治疗组总有效率为84.2%,对照组为81.3%,两组比较差异具有统计学意义(P<0.05)。结论针刺配合阿是穴刺络放血是一种治疗急性痛风性关节炎的有效方法。%Objective To investigate the clinical efficacy of acupuncture plus ashi point pricking bloodletting in treating acute gouty arthritis.Methods Seventy patients with acute gouty arthritis were randomly allocated to a treatment group of 38 cases and a control group of 32 cases. The treatment group received acupuncture plus ashi point pricking bloodletting and the control group, routine medication. Blood uric acid and C reaction protein contents were measured in the two groups before and after treatment. The clinical therapeutic effects were compared between the two groups.Results There were statistically significant differences in blood uric acid and C reaction protein contents after one and two courses of treatment compared with before treatment in the two groups (P<0.01). After two courses of treatment, there was a statistically significant difference in comparing C reaction protein contents between the two groups (P<0.05). The total efficacy rate was 84.2% in the treatment group and 81.3% in the control group; there was a statistically significant difference between the two groups (P<0.05).Conclusion Acupuncture plus ashi point pricking bloodletting is an effective way to

  4. Clinical observation of reinforcing and reducing technique at Jiaji and ashi points for post-herpetic neuralgia%针刺补泻手法用于夹脊穴、阿是穴为主治疗带状疱疹后遗神经痛临床观察

    Institute of Scientific and Technical Information of China (English)

    谢衡辉; 文娜

    2013-01-01

    Objective To observe the clinical efficacy of reinforcing and reducing technique at Jiaji and ashi points for post-erpeticneuralgia (PHN). Methods Seventy cases of PHN were randomly divided into a treatment group (35 cases) and a control group (35 cases),and 5 cases in the control group were dropped out. In the treatment group, the reinforcing and reducing technique at Jiaji and ashi points was applied. In the control group, electroacupuncture therapy was applied at the same acupoints. The treatment of 3 courses was required.The scores of visual analogue scale (VAS), Pittsburgh sleep quality index (PSQI) and total clinical efficacy were compared before and after the treatment as well as one-month follow-up visit, separately, between two groups. Results After the treatment of 3 courses, the total clinical efficacy was not statistically significant between two groups (P>0.05). The VAS and PSQI scores of two groups after the treatment and one-month follow-up visit were significantly decreased compared with those before the treatment (P<0.01). The VAS scores in one-month of follow-up visit and PSQI scores after the treatment and one-month of follow-up visit in the treatment group were decreased compared with those in the control group, which both had significantly differences in statistics (P<0.05,P<0.01). Conclusion The reinforcing and reducing technique at Jiaji and ashi points for PHN has better effect of long-term analgesia and improvement of sleep quality than electroacupuncture therapy at the same acupoints.%目的 观察针刺补泻手法用于夹脊穴和阿是穴为主治疗带状疱疹后遗神经痛(PHN)的临床疗效.方法 将PHN患者随机分为治疗组35例和对照组30例.治疗组采取针刺补泻手法用于夹脊穴和阿是穴为主的穴位,对照组采取相同穴位电针治疗,7天为1个疗程,均治疗3个疗程.于治疗前、治疗结束、治疗后1个月随访时比较2组视觉模拟评分(VAS)、匹兹堡睡眠质量

  5. Clinical observation on therapeutic effect and instant analgestic effect of inhibitory-needling at Ashi point as major point for treatment of piriformis syndrome%抑制法针刺阿是穴为主治疗梨状肌综合征即时止痛及疗效观察

    Institute of Scientific and Technical Information of China (English)

    陈仁年; 陈永斌

    2009-01-01

    Objective To observe therapeutic effect and analgesic effect of needling at Ashi point for treatment of piriformis syndrome. Methods Eighty cases were randomly divided into an inhibitory-needling method group (INM) and a routine-needling method group (RNM), forty cases in each group. The acupuncture at Ashi point as major point with inhibitory-needling munipulation was applied in the INM group, the acupuncture at Huantiao (GB 30) ,Zhibian (BL 54) , Yanglingquan (GB 34) with routine-needling method in the RNM group. The therapeutic effect, the instant analgesic effect and score of Visual Analogue Scale (VAS) were observed. Results After treatment, the effective rate of 92.5% in the INM group was better than that of 82.5% in the RNM group (P<0.05); the instant analgesic effect rate of 75.0% in the INM group was better than that of 52.5% in the RNM group (P<0.01) ; the score of VAS in both groups had decreased with a significant difference between two groups (P<0.05). Conclusion The treatment of inserting the needle at Ashi point as major point with inhibitory-needling method has excellent effectiveness and good instant analgesic effect, with fewer points selection and rapid effect.%目的:观察抑制法针刺阿是穴为主治疗梨状肌综合征的即时止痛效果和临床疗效.方法:将80例患者随机分为抑制法针刺组和常规针刺组,每组40例.抑制法针刺组采用抑制Ⅱ型手法针刺阿是穴为主穴治疗;常规针刺组穴取环跳、秩边、阳陵泉等,采用传统方法针刺治疗.观察两组即时止痛效果、疼痛视觉模拟(VAS)评分及临床疗效.结果:抑制法针刺组有效率为92.5%,常规针刺组为82.5%,抑制法针刺组临床疗效优于常规针刺组(P<0.05);抑制法针刺组止痛的即时显效率为75.0%,优于常规针刺组的52.5%(P<0.01);两组治疗后VAS评分均较治疗前减少(均P<0.01),且抑制法针刺组较常规针刺组VAS评分降低更明显(P<0.05).结论:抑制法针刺阿是穴为

  6. How extending motor vehicle's replacement cycle affects Japanese economy Impact assessment using macroeconometric and input-output simulations. Jidosha kaikae cycle no chokika ga kokunai keizai ni ataeru eikyo ni tsuite. Makuro keizai sangyo renkan model ni yoru hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Wakabayashi, M.

    1999-01-01

    The motor vehicle industry, which has inspired domestic production activities since the 1960's, is coming up against inevitable changes. One of the typical phenomena is that the domestic motor vehicle market is getting ripe. Since almost 80 percent of households in our country already have at least one motor vehicle and the population is going to reduce, it isn't expected that the newly car demand will increase rapidly as it did before the end of 1980's. It is strongly predicted that purchase of cars motivated mainly for replacement is going to take a leading part of domestic sales. In this paper, we calculate the impacts of extending motor vehicle's replacement cycles, as one aspect of maturation of the domestic motor vehicle market, on Japanese economy. Reduction of new car demands affects production not only in the motor vehicle industry, but also in the various industries. It is because motor vehicles are manufactured goods those need many step of production by the time of selling. Using CRIEPI's macroeconometric and input-output models, we clarified that retrenchment of car replacement would decrease 2.6 trillion yen of total industry output in 1990 constant price value added terms. The loss of output in the motor vehicle industry would be 381 billion yen, and in the retail and wholesale sector it would amount td 666 billion yen. Also, electric power industry would lose 47 billion yen's takings. Considering low economic growth since 1990, this impact could have a great influence on our prospective growing process. (author)

  7. How extending motor vehicle`s replacement cycle affects Japanese economy ? Impact assessment using macroeconometric and input-output simulations; Jidosha kaikae cycle no chokika ga kokunai keizai ni ataeru eikyo ni tsuite. Makuro keizai sangyo renkan model ni yoru hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Wakabayashi, M.

    1999-01-01

    The motor vehicle industry, which has inspired domestic production activities since the 1960`s, is coming up against inevitable changes. One of the typical phenomena is that the domestic motor vehicle market is getting ripe. Since almost 80 percent of households in our country already have at least one motor vehicle and the population is going to reduce, it isn`t expected that the newly car demand will increase rapidly as it did before the end of 1980`s. It is strongly predicted that purchase of cars motivated mainly for replacement is going to take a leading part of domestic sales. In this paper, we calculate the impacts of extending motor vehicle`s replacement cycles, as one aspect of maturation of the domestic motor vehicle market, on Japanese economy. Reduction of new car demands affects production not only in the motor vehicle industry, but also in the various industries. It is because motor vehicles are manufactured goods those need many step of production by the time of selling. Using CRIEPI`s macroeconometric and input-output models, we clarified that retrenchment of car replacement would decrease 2.6 trillion yen of total industry output in 1990 constant price value added terms. The loss of output in the motor vehicle industry would be 381 billion yen, and in the retail and wholesale sector it would amount td 666 billion yen. Also, electric power industry would lose 47 billion yen`s takings. Considering low economic growth since 1990, this impact could have a great influence on our prospective growing process. (author)

  8. Study on unified fatigue strength assessment method for welded structure. Hot spot stress evaluating method for various combinations of plate thickness and weld leg length; Yosetsu kozo no toitsutekina hiro kyodo hyokaho ni kansuru kenkyu. Itaatsu to yosetsu ashinaga no kumiawase ni taisuru hot spot oryoku sanshutsu ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Nihei, K.; Inamura, F.; Koe, S. [Kawasaki Heavy Industries, Ltd., Kobe (Japan)

    1996-12-31

    There has been tried to apply unified assessment method using hot spot stress, which is effective to evaluate fatigue strength of fillet welded structures for ships and marine structures. This method can be applied to complicated structures and is independent of welding processes. In this study, first, stress analysis has been conducted for two-dimensional fillet welded joint models with various combinations of plate thickness and weld leg length of general fillet structures by means of boundary element method. Then, critical position, which is not affected by local stress concentration due to bead, was determined from the detailed stress distribution in the vicinity of weld toe. As a result, a general equation has been proposed to estimate the hot spot stress by one-point representative method. Second, the fatigue tests of typical fillet welded joints have been conducted by applying this method. Consequently, it was demonstrated that the unified fatigue strength can be evaluated by the S-N data based on hot spot stress range determined from the proposed equation, independent of structural stress concentration. 22 refs., 14 figs.

  9. Comparative analysis of thermal storage cooling and storage battery cooling using photovoltaic generation. Part 2. Research on architectural systematization of energy conversion devices; Taiyoko hatsuden ni yoru chikunetsu reibo to chikuden reibo ni tsuite. 2. Energy henkan no kenchiku system ka ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Ito, N.; Kimura, G.; Fukao, S.; Shimizu, T.; Sunaga, N.; Tsunoda, M.; Muro, K.; Yamanaka, S. [Tokyo Metropolitan University, Tokyo (Japan)

    1996-10-27

    For use in energy self-sufficient buildings, a system was studied capable of retaining for its own use the excess of power produced by a photovoltaic power generation system without releasing it to the commercial system. Summertime cooling was considered. The storage battery cooling system was provided with two solar cell systems and, in the daytime, one was used for cooling and the other for charging batteries for nighttime cooling. In the cold heat storage cooling system, cold heat accumulators (red bricks) were provided in the wall and floor, and under the floor, and the floor was a grating for proper ventilation between the room and underfloor space. With the solar cell-driven air conditioner out of operation, cold heat was fed to the room from the underfloor cold heat accumulators by a fan. In storage battery cooling, solar power covered 60% of what the air conditioner used. In the presence of sufficient power in storage, the air conditioner stayed on at night without buying commercial power, when the room temperature was 25{degree}C. In the cold heat accumulation cooling, 50% of the air conditioner power consumption was covered by solar power. It is recommended to install cold heat accumulators not in the room but in a separate space, such as the underfloor space, where they are exposed to the cooling cold air direct from an air conditioner for future retrieval of cold heat. 2 refs., 9 figs., 3 tabs.

  10. Surface Tension of Molten Ni and Ni-Co Alloys

    Institute of Scientific and Technical Information of China (English)

    Feng XIAO; Liang FANG; Kiyoshi NOGI

    2005-01-01

    Surface tension of molten Ni and Ni-Co (5 and 10 mass fraction) alloys was measured at the temperature range of 1773~1873 K using an improved sessile drop method with an alumina substrate in an Ar+3%H2 atmosphere. The error of the data obtained was analyzed. The surface tension of molten Ni and Ni-Co (5 and 10 mass fraction) alloys decreases with increasing temperature. The influence of Co on the surface tension of Ni-Co alloys is little in the studied Co concentration range.

  11. Room temperature ferromagnetism of Ni, (Ni, Li), (Ni, N)-doped ZnO thin films

    Institute of Scientific and Technical Information of China (English)

    AU; ChakTong

    2010-01-01

    Ni-doped ZnO thin films (Ni concentration up to 10 mol%) were generated on Si (100) substrates by a sol-gel technique. The films showed wurtzite structure and no other phase was found. The chemical state of Ni was found to be bivalent by X-ray photoelectron spectroscopy. The results of magnetic measurements at room temperature indicated that the films were ferromagnetic, and magnetic moment decreased with rise of Ni concentration. The magnetization of Ni (10 mol%)-doped ZnO film annealed in nitrogen was lower than that annealed in argon, suggesting that the density of defects had an effect on ferromagnetism.

  12. ZnNi data

    Science.gov (United States)

    2014-11-01

    www.asetsdefense.org Teaming website: www.materialoptions.com Other data .. •• • Zinc - nickel alloy coatings r~.., ataTECH Corrosion...cathodic corrosion protection with y- zinc - nickel alloy! () ToTAL ----------------- · ---------------- . A ~ESTCP ~§g.~J?.P Keith Legg 847-680...2009 Boeing. All rights reserved. Fatigue Test Results (Alkaline Zinc - Nickel , Phase IV) • Nickel Alloy 718 Bolts – 3/8” diameter Cd or Zn-Ni

  13. Ni landsbyer i Danmark

    DEFF Research Database (Denmark)

    Larsen, Jacob Norvig

    Denne rapport beskriver en evaluering af statsstøttede forsøg med at styrke og udvikle mindre lokalsamfund. Forsøgene er gennemført i ni kommuner. Da der i disse år er stor opmærksomhed om de små byers og samfunds udviklingsmuligheder, har erfaringerne fra forsøgsprojekterne bred interesse. Forsø...

  14. 超微针刀反阿是穴疗法治疗膝骨性关节炎疗效观察%Efficacy observation on osteoarthritis of the knee treated with the ultrastructural acnpotomy therapy at the counter-Ashi points

    Institute of Scientific and Technical Information of China (English)

    刘美荣; 李里; 贺志伟

    2012-01-01

    Objective To compare the difference in the efficacy on osteoarthritis of the knee between the ultra-structural acupotomy therapy at the counter-Ashi points and the conventional acupuncture-moxibustion therapy. Methods Sixty cases were randomly devided into an ultrastructural acupotomy therapy group(group A) and a conventional acupuncture-moxibustion group(group B), 30 cases in each one. In the group A, the ultrastructural acupotomy therapy was applied to the counter-Ashi points in which pain was alleviated or disappeared on pressure. The treatment was given once a week, lasting for 1 month. In the group B, the acupuncture-moxibustion therapy was applied to Dubi (ST 35) , Neixiyan (EX-LE 4), Zusanli (ST 36) , Yanglingquan (GB 34), etc. The treatment was given once daily, lasting for 1 month. Before and after treatment, the Visual Analogue Scale (VAS), Ly-sholm knee joint scale and the affected knee joint flexion angle were observed in the two groups. The clinical efficacy was compared between the two groups. Results After treatment, the scores of VAS, Lysholm knee joint scale and the affected knee joint flexion angle were improved obviously as compared with those before treatment in either group (P<0. 01, P<0. 05). The results of them in the group A were superior apparently to those in the group B (all P<. 0. 05). The total effective rate in the group A was superior to that in the group B [80. 0%(24/30) vs 60. 0%(18/30), P<0. 053. Conclusion The ultrastructural acupotomy therapy at the counter-Ashi points achieves the superior clinical efficacy on osteoarthritis of the knee as compared with the conventional acupuncture therapy. It relieves pain and improves the motion range of knee joint effectively. It is simple in operation and less in treatment frequency.%目的:比较超微针刀反阿是穴疗法与常规针灸疗法治疗膝骨性关节炎的疗效差异.方法:将60例患者随机分为超微针刀组、常规针灸组,每组30例.超微针刀组在

  15. 项八针配合头部阿是穴留针治疗颈源性头痛临床研究%ClinicalStudy of Nape Eight Needles plus Cephalic Ashi Point Needle Retention for Treatment of Cervicogenic Headache

    Institute of Scientific and Technical Information of China (English)

    罗建昌; 郎伯旭

    2015-01-01

    ObjectiveTo investigate the clinical efficacy of nape eight needles plus cephalic ashi point acupuncture in treating cervicogenic headache.MethodA randomized controlled trial was carried out. Eighty-nine patients with cervicogenic headache were randomly allocated to two groups, the treatment group of 45 cases and the control group of 44 cases. Nape eight points [bilateral Fengchi(GB20), Fengfu(GV16), Dazhui(GV14) and “nape Sihuaxue”] and cephalic ashi points were selected inthe treatment group and Huatuo jiaji(Ex-B2) points at the affected cervical vertebrae and points Tianzhu(BL10), Fengchi, Yuzhen(BL9), Lieque(LU7), Taichong(LR3)and Zulinqi(GB41), in the control group. Every group was treated three times a week for two weeks. A follow-up was performed at one month after the completion of treatment. Headache was scored using the VAS, and continuous headache time, headache frequency and range of motion (ROM) of cervical spine were scored before treatment, at the end ofone week’s treatment, at the completion of treatment and at one month after the completion of treatment. The therapeutic effect at the completion of treatment and the follow-up was evaluated according to criteria for assessing the therapeutic effect.ResultAt the completion of treatment and the follow-up, the headache score and the range of motion of cervical spine score were lower in the treatment group than in the control group (P<0.05). In the treatment group, the total efficacy rate was 91.1% at the completion of treatment and 86.7% at the follow-up; the short-term and the long-term therapeutic effects were superior to those in the control group (P<0.05). After one week of treatment, the total efficacy rate was 57.8%, which was higher than 11.4% in thecontrol group (P<0.05).ConclusionTreatment with nape eight needles plus cephalic ashi point needle retention has a marked improving effect on headache symptoms and range of motion of cervical spine in cervicogenic headache. Its short-term and

  16. Preparation of nanoporous Ni and Ni-Cu by dealloying of rolled Ni-Mn and Ni-Cu-Mn alloys

    Energy Technology Data Exchange (ETDEWEB)

    Hakamada, Masataka, E-mail: masataka-hakamada@aist.go.j [Materials Research Institute for Sustainable Development, National Institute of Advanced Industrial Science and Technology (AIST), 2266-98 Anagahora, Shimosihidami, Moriyama, Nagoya 463-8560 (Japan); Mabuchi, Mamoru [Department of Energy Science and Technology, Graduate School of Energy Science, Kyoto University, Kyoto 606-8501 (Japan)

    2009-10-19

    Nanoporous Ni, Ni-Cu and Cu with ligament sizes of 10-20 nm were fabricated by dealloying rolled Ni-Mn, Cu-Ni-Mn and Cu-Mn alloys, respectively. Unlike conventional Raney nickel composed of brittle Ni-Al intermetallic compounds, the initial alloys had good workability. Ni and Cu atoms formed a homogeneous solid solution in the nanoporous architecture. The ligament sizes of nanoporous Ni and Ni-Cu were smaller than that of nanoporous Cu, reflecting the difference between the surface diffusivities of Ni and Cu.

  17. Experimental investigation of the generation mechanism of aerodynamic noise. 2nd Report. On correlation between surface pressure fluctuation and aerodynamic sound radiated from a circular cylinder; Kurikion no hassei kiko ni kansuru jikken kaiseki. 2. Hyomen atsuryoku hendo to kurikion no sogo sokan ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Iida, A.; Kato, C.; Otaguro, T. [Hitachi, Ltd., Tokyo (Japan); Fujita, H. [Nihon University, Tokyo (Japan). College of Science and Technology

    1996-12-25

    The mechanism of aerodynamic sound generation from a circular cylinder is investigated experimentally using coherence functions between surface pressure fluctuation and radiated sound at Reynolds numbers from 10{sup 4} to 1.4 {times} 10{sup 5}. The correlation between the surface pressure fluctuation and the radiated sound at the fundamental frequency is good, indicating the strong contribution of ordered structures to aerodynamic sound generation. The characteristic length of ordered structure Lc is estimated using the integral scale of the spanwise coherence function of surface pressure fluctuations. The sound pressure is calculated using a modified Curle`s equation, with the characteristic length and measured surface pressure fluctuations. The predicted spectra of radiated sound are in good agreement with those actually measured up to five times the fundamental frequency. This result shows that Lc, is useful for estimating the character of radiated sound from a circular cylinder. 16 refs., 13 figs., 2 tabs.

  18. Experimental investigation of generation mechanism of aerodynamic noise. 1st Report. On a coherent structure of surface pressure fluctuation on a circular cylinder; Kurikion no hassei kiko ni kansuru jikken kaiseki. 1. Enchu hyomen atsuryoku hendo no kukan kozo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Iida, A.; Kato, C.; Takano, Y. [Hitachi, Ltd., Tokyo (Japan); Fujita, H. [Tokyo Institute of Technology, Tokyo (Japan)

    1995-12-25

    Spanwise coherent structure of surface pressure fluctuation on a circular cylinder is studied experimentally in order to obtain quantitative information for understanding the generation mechanism of aerodynamic sound from the cylinder at Reynolds numbers between 5{times}10{sup 3} and 1.4{times}10{sup 5}. Span wise distribution of the coherence function between surface pressures is kept as high as up to several diameters for the frequency components of the so-called orderly structure, or the Karman vortex shedding frequency and its harmonics, while the coherence function for the turbulent frequency component decays rapidly span wise to half-diameter. Span wise coherence function of the surface pressure is calculated as an exponential function of span wise spacing and Reynolds number. The correlation length of the flow structure is found to be inversely proportional to Re{sup 1/2}. 18 refs., 13 figs., 1 tab.

  19. Recent trends of deep offshore exploration. From `Survey of Trends and Problems in Floating Structure Operating Technology for Deep Offshore Drilling Systems`; Daisuishin kaiiki ni okeru saikin no tanko kaihatsu doko ni tsuite. `Daisuishin kussaku system no futai un`yo gijutsu i kansuru doko to mondaiten no chosa` yori

    Energy Technology Data Exchange (ETDEWEB)

    Hosomi, A. [The Institute of Energy Economics, Tokyo (Japan)

    1998-06-01

    Japan National Oil Corporation`s survey for fiscal 1997 of deepsea mine exploration and exploitation in the world is described. The survey discloses that future potentials are high in the Mediterranean, Asia, and Oceania although the generally known main deepsea oil-producing zones of the world belong in the Atlantic, as exemplified by the western part of the North Sea. The level of oil exploitation in the ocean that has been 200m or shallower in the past is now advancing deeper toward levels lower than 1000m. As for pilot drilling, although a 2000m-deep level is regarded as the limit beyond which progress deeper would be difficult, yet drilling into a 3000m-deep level is now being planned. Among drilling contractors, reorganization is under way through merger and acquisition. Although the total number of rigs has reduced, demand for rigs turned strong in 1996, and the number of rigs is increasing rapidly through new construction or refurbishment. As for ocean development systems, various practical applications have added to the list of available systems. 3 figs., 6 tabs.

  20. Report on the survey in fiscal 1998. Evaluation by the industry on the result of COP3 and the future activities (Germany); 1998 nendo chosa hokokusho. COP3 no kekka ni taisuru sangyokai no hyoka oyobi kongo no taio ni tsuite (Doitsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A survey was carried out on activities taken in Germany. The industry has a strong opinion to take voluntary regulations rather than those by laws. The nation's activities are being moved forward centrally with the suppression policies that follow the declaration on the voluntary regulation by the German industry to prevent global warming, which had been submitted by the German Industry Federation to the federal government in 1996. The participation to the declaration, which is optional, covers 71% of the energy consumption by manufacturing industries and 99% of the public electric power consumption, but large-scale industrial departments such as machine and electric power sectors who have not participated can also been found. The plan calls for reduction of inherent CO2 and energy per added value production amount in the entire industry by as much as 20% of the result in 1990 by 2005. According to the third party monitoring system employed by the federal government, the industry submits results of periodical analyses to the government. According to the result, the industries participated in the voluntary regulation have achieved annual exhaust suppression of 42 million tons during the period of 1990 to 1996. The public electric power industrial department whose CO2 emission accounts for a little less than 30% of the nation's total emission amount has a great effect. The industry is making efforts to improve the power generation efficiency aiming at reduction of CO2 emission of 12% of the 1990 result by 2015. (NEDO)

  1. Onset of asthma-like symptoms by intratracheal injection of diesel exhaust particles (DEP) to Mice: Role of active oxygen species. Diesel haiki biryushi (DEP) no mausu eno kikannai toyo ni yoru zensoku yobyotai no hatsugen ni tsuite (Tokuni, kassei sansosansei wo kaishita eikyo wo chushin toshite)

    Energy Technology Data Exchange (ETDEWEB)

    Sagai, M.; Ichinose, T.; Furuyama, A. (National Institute for Environmental Studies, Tsukuba (Japan))

    1993-07-10

    In order to examine the poisonous effect of the DEP, the extracts of DEP were injected at various concentration into tracheas of mice. As a result, LD[sub 50] was 0.6 mg (as DEP) and by 0.9 mg all rats were died within 24 hours. All causes of their death were the lung edema. Under the condition of the above examination, when PEG-SOD (polyethylene glycol conjugated superoxide dismutase) was injected to the mice previously one hour before the injection of the extracts of DEP, remarkable decrease of mortality was found. From this change, it was considered that the superoxide O2[sup -] sprang up from the DEP and caused the vascular endothelial damage. In the second stage, the DEP were applied at the lower concentration 10 times at intervals of a week, and the tissues of lungs were observed morphologically. The edema at the bronchial submucosal layer and the circumference of blood vein and the infiltration at the neutrophils and eosinophils were observed. These findings suggest that the substance of poison of the DEP is active oxygen and, by the fact, the increase of vascular permeability and mucous hypersecretion are brought. 43 refs., 8 figs., 1 tab.

  2. Record of controlling hydroponic solution temperature by using heat pumps in water culture facilities (for onions and tomatoes) and the cost thereof; Suiko saibai shisetsu (negi, tomato) no heat pump ni yoru yoeki ondo seigyo no jisseki oyobi sono cost ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Yonezawa, K. [Chugoku Electric Power Co. Inc., Hiroshima (Japan)

    1997-03-21

    This paper summarizes operation record of heat pumps used in controlling temperatures of hydroponic solution in onion and tomato hydroponic culture facilities. The facilities are of greenhouse structure constructed by glass, and their environmental temperatures are controlled by heaters, heat insulating curtains, and light shielding curtains. The hydroponic solution temperatures are controlled by heat pumps, with target temperatures set to 22-24{degree}C in summer and 13-18{degree}C in winter for onion, and 22-23{degree}C in summer and 18-20{degree}C in winter for tomato. The hydroponic solution temperatures for onion and tomato were maintained at the targeted temperatures even if the outside temperature has varied from maximum to minimum. The hydroponic solution controlling cost as calculated from the heat pump facility cost and annual onion harvest amounted to 51 yen/kg, which corresponds to about 6% of the shipment price of the onion. In the case of tomato, the hydroponic solution temperature having fallen below 15{degree}C causes delay in growth and Mg depletion. Temperatures higher than that develop reduction in physiological function of roots, and the root rot disease. Controlling the hydroponic solution should have resulted in stabilized harvest. The solution controlling cost for tomato is 15 yen/kg, which is about 5% of the shipment price. 3 refs., 15 figs.

  3. Experimental model for architectural systematization and its basic thermal performance. Part 1. Research on architectural systematization of energy conversion devices; Kenchiku system ka model no gaiyo to kihon seino ni tsuite. 1. Energy henkan no kenchiku system ka ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Sunaga, N.; Ito, N.; Kimura, G.; Fukao, S.; Shimizu, T.; Tsunoda, M.; Muro, K. [Tokyo Metropolitan University, Tokyo (Japan)

    1996-10-27

    The outline of a model for architectural systematization of natural energy conversion and the experiment result on the basic thermal performance in winter are described. The model is about 20 m{sup 2} in floor space. Foam polystyrene of 100 mm and 200 mm thick was used for the outer wall as heat insulating materials. The model has a solar battery and air conditioner and uses red brick as a heat reservoir. An experiment was made on seven modes obtained when three elements (heating, heat storage, and night insulated door) are combined. The information obtained by the experiment showed that a model for architectural systematization has high heat insulation and tightness and can be used as an energy element or an evaluation model for architectural systematization. In this model for architectural systematization, the power consumption of an air conditioner in winter can be fully supplied by only the power generation based on a solar battery. In an architectural element, the heating energy consumption can be remarkably reduced and the indoor thermal environment can be greatly improved, by the combination of a heat reservoir and night heat insulated door. 1 ref., 6 figs., 3 tabs.

  4. Niños investigadores

    Directory of Open Access Journals (Sweden)

    Manfred Liebel

    2007-12-01

    Full Text Available EN LA SOCIOLOGÍA INFANTIL, EL PRINCIPIO DE HACER PARTICIPAR A NIÑAS Y NIÑOS en los procesos de investigación está ampliamente reconocido. Tomando como punto de partida ese principio de participación, el presente aporte analiza la pregunta de en qué medida y de qué manera los niños mismos pueden actuar como investigadores. A fin de apreciar en lo justo la perspectiva de los niños, el presente trabajo aboga por que –con el debido acompañamiento de personas adultas– la investigación esté en manos de los niños. Por medio de varios ejemplos de países del Sur, se muestra cómo poner en práctica esta forma de investigación encabezada por niños. Tomando en cuenta la desigualdad en las relaciones entre niñas, niños y personas adultas, el trabajo hace referencia a problemas de ética y práctica investigativa que surgen en el proceso de investigación y también en el tema del uso de los resultados. Finalmente, se explican los beneficios que niñas y niños pueden obtener de sus propias investigaciones.

  5. Electroplated Ni on the PN Junction Semiconductor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jin Joo; Uhm, Young Rang; Son, Kwang Jae; Kim, Jong Bum; Choi, Sang Moo; Park, Jong Han; Hong, Jintae [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    Nickel (Ni) electroplating was implemented by using a metal Ni powder in order to establish a Ni-63 plating condition on the PN junction semiconductor needed for production of betavoltaic battery. PN junction semiconductors with a Ni seed layer of 500 and 1000 A were coated with Ni at current density from 10 to 50 mA cm{sup 2}. The surface roughness and average grain size of Ni deposits were investigated by XRD and SEM techniques. The roughness of Ni deposit was increased as the current density was increased, and decreased as the thickness of Ni seed layer was increased.

  6. Enhanced collectivity in 74Ni

    CERN Document Server

    Aoi, N; Takeuchi, S; Suzuki, H; Bazin, D; Bowen, M D; Campbell, C M; Cook, J M; Dinca, D -C; Gade, A; Glasmacher, T; Iwasaki, H; Kubo, T; Kurita, K; Motobayashi, T; Mueller, W F; Nakamura, T; Sakurai, H; Takashina, M; Terry, J R; Yoneda, K; Zwahlen, H

    2010-01-01

    The neutron-rich nucleus 74Ni was studied with inverse-kinematics inelastic proton scattering using a 74Ni radioactive beam incident on a liquid hydrogen targetat a center-of-mass energy of 80 MeV. From the measured de-excitation gamma-rays, the population of the first 2+ state was quantified. The angle-integrated excitation cross section was determined to be 14(4) mb. A deformation length of delta = 1.04(16) fm was extracted in comparison with distorted wave theory, which suggests that the enhancement of collectivity established for 70Ni continues up to 74Ni. A comparison with results of shell model and quasi-particle random phase approximation calculations indicates that the magic character of Z = 28 or N = 50 is weakened in 74Ni.

  7. Enhanced collectivity in 74Ni

    Science.gov (United States)

    Aoi, N.; Kanno, S.; Takeuchi, S.; Suzuki, H.; Bazin, D.; Bowen, M. D.; Campbell, C. M.; Cook, J. M.; Dinca, D.-C.; Gade, A.; Glasmacher, T.; Iwasaki, H.; Kubo, T.; Kurita, K.; Motobayashi, T.; Mueller, W. F.; Nakamura, T.; Sakurai, H.; Takashina, M.; Terry, J. R.; Yoneda, K.; Zwahlen, H.

    2010-09-01

    The neutron-rich nucleus 74Ni was studied with inverse-kinematics inelastic proton scattering using a 74Ni radioactive beam incident on a liquid hydrogen target at a center-of-mass energy of 80 MeV. From the measured de-excitation γ rays, the population of the first 2+ state was quantified. The angle-integrated excitation cross section was determined to be 14(4) mb. A deformation length of δ=1.04(16) fm was extracted in comparison with distorted wave theory, which suggests that the enhancement of collectivity established for 70Ni continues up to 74Ni. A comparison with results of shell model and quasi-particle random phase approximation calculations indicates that the magic character of Z=28 or N=50 is weakened in 74Ni.

  8. Nitriding behavior of Ni and Ni-based binary alloys

    Energy Technology Data Exchange (ETDEWEB)

    Fonovic, Matej

    2015-01-15

    Gaseous nitriding is a prominent thermochemical surface treatment process which can improve various properties of metallic materials such as mechanical, tribological and/or corrosion properties. This process is predominantly performed by applying NH{sub 3}+H{sub 2} containing gas atmospheres serving as the nitrogen donating medium at temperatures between 673 K and 873 K (400 C and 600 C). NH{sub 3} decomposes at the surface of the metallic specimen and nitrogen diffuses into the surface adjacent region of the specimen whereas hydrogen remains in the gas atmosphere. One of the most important parameters characterizing a gaseous nitriding process is the so-called nitriding potential (r{sub N}) which determines the chemical potential of nitrogen provided by the gas phase. The nitriding potential is defined as r{sub N} = p{sub NH{sub 3}}/p{sub H{sub 2}{sup 3/2}} where p{sub NH{sub 3}} and p{sub H{sub 2}} are the partial pressures of the NH{sub 3} and H{sub 2} in the nitriding atmosphere. In contrast with nitriding of α-Fe where the nitriding potential is usually in the range between 0.01 and 1 atm{sup -1/2}, nitriding of Ni and Ni-based alloys requires employing nitriding potentials higher than 100 atm{sup -1/2} and even up to ∞ (nitriding in pure NH{sub 3} atmosphere). This behavior is compatible with decreased thermodynamic stability of the 3d-metal nitrides with increasing atomic number. Depending on the nitriding conditions (temperature, nitriding potential and treatment time), different phases are formed at the surface of the Ni-based alloys. By applying very high nitriding potential, formation of hexagonal Ni{sub 3}N at the surface of the specimen (known as external nitriding) leads to the development of a compound layer, which may improve tribological properties. Underneath the Ni{sub 3}N compound layer, two possibilities exist: (i) alloying element precipitation within the nitrided zone (known as internal nitriding) and/or (ii) development of metastable and

  9. Measurement of {sup 59}Ni and {sup 63}Ni by accelerator mass spectrometry at CIAE

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xiaoming [China Institute of Atomic Energy, P.O. Box 275(50), Beijing 102413 (China); He, Ming, E-mail: minghe@ciae.ac.cn [China Institute of Atomic Energy, P.O. Box 275(50), Beijing 102413 (China); Ruan, Xiangdong [College of Physics and Technology, Guangxi University, Nanning 530004 (China); Xu, Yongning [China Institute of Atomic Energy, P.O. Box 275(50), Beijing 102413 (China); Shen, Hongtao [College of Physics and Technology, Guangxi Normal University, Guilin 541004 (China); Du, Liang; Xiao, Caijin; Dong, Kejun; Jiang, Shan; Yang, Xuran [China Institute of Atomic Energy, P.O. Box 275(50), Beijing 102413 (China); Lan, Xiaoxi [College of Physics and Technology, Guangxi University, Nanning 530004 (China); Wu, Shaoyong; Zhao, Qingzhang [China Institute of Atomic Energy, P.O. Box 275(50), Beijing 102413 (China); Cai, Li [College of Physics and Technology, Guangxi University, Nanning 530004 (China); Pang, Fangfang [College of Physics and Technology, Guangxi Normal University, Guilin 541004 (China)

    2015-10-15

    The long lived isotopes {sup 59}Ni and {sup 63}Ni can be used in many areas such as radioactive waste management, neutron dosimetry, cosmic radiation study, and so on. Based on the large accelerator and a big Q3D magnetic spectrometer, the measurement method for {sup 59}Ni and {sup 63}Ni is under development at the AMS facility at China Institute of Atomic Energy (CIAE). By using the ΔE-Q3D technique with the Q3D magnetic spectrometer, the isobaric interferences were greatly reduced in the measurements of {sup 59}Ni and {sup 63}Ni. A four anode gas ionization chamber was then used to further identify isobars. With these techniques, the abundance sensitivities of {sup 59}Ni and {sup 63}Ni measurements are determined as {sup 59}Ni/Ni = 1 × 10{sup −13} and {sup 63}Ni/Ni = 2 × 10{sup −12}, respectively.

  10. Magnetic property and interface structure of Ta/NiO/NiFe/Ta

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Ta/NiO/NiFe/Ta multilayers, utilizing Ta as buffer layer, were prepared by rf reactive and dc magnetron sputtering. The exchange coupling field between NiO and NiFe reached a maximum value of 9.6×103 A/m at a NiO film thickness of 50 nm. The composition and chemical states at interface region of Ta/NiO/Ta were studied by using the X-ray photoelectron spectroscopy (XPS) and peak decomp- osition technique. The results show that there is an "inter- mixing layer" at the Ta/NiO (and NiO/Ta) interface due to a thermodynamically favorable reaction 2Ta + 5NiO = 5Ni + Ta2O5. This interface reaction has a great effect on exchange coupling. The thickness of Ni+NiO estimated by XPS depth- profiles is about 8-10 nm.

  11. Interface chemical states of NiO/NiFe films and their effects on magnetic properties

    Institute of Scientific and Technical Information of China (English)

    于广华; 柴春林; 朱逢吾; 赖武彦

    2002-01-01

    Ta/NiOx/Ni81Fe19/Ta multilayers were prepared by rf reactive and dc magnetron sputtering.The exchange coupling field (Hex) and the coercivity (Hc) of NiOx/Ni81Fe19 as a function of the ratio of Ar to O2 during the deposition process were studied.The composition and chemical states at the interface region of NiOx/NiFe were also investigated using the X-ray photoelectron spectroscopy (XPS) and peak decomposition technique.The results show that the ratio of Ar to O2 has great effect on the nickel chemical states in NiOx film.When the ratio of Ar to O2 is equal to 7 and the argon sputtering pressure is 0.57 Pa,the x value is approximately 1 and the valence of nickel is +2.At this point,NiOx is antiferromagnetic NiO and the corresponding Hex is the largest.As the ratio of Ar/O2 deviates from 7,the exchange coupling field (Hex) will decrease due to the presence of magnetic impurities such as Ni+3 or metallic Ni at the interface region of NiOx/NiFe,while the coercivity (Hc) will increase due to the metallic Ni.XPS studies also show that there are two thermodynamically favorable reactions at the NiO/NiFe interface: NiO+Fe=Ni+FeO and 3NiO+2Fe=3Ni+Fe2O3.These interface reaction products are magnetic impurities at the interface region of NiO/NiFe.It is believed that these magnetic impurities would have effect on the exchange coupling field (Hex) and the coercivity (Hc) of NiO/NiFe.

  12. GRAIN BOUNDARY CHEMISTRY IN Ni3Al AND Ni3Si

    OpenAIRE

    Baker, I; Schulson, E.; Michael, J.; Padgett, R.

    1990-01-01

    Measurements of the Ni/Al ratio at grain boundary regions in Ni3Al have been performed, using x-ray microanalysis of thin foils in a scanning transmission electron microscope, as a function of both alloy stoichiometry and the addition of boron. It is shown that whilst grain boundaries of Al-rich and stoichiometric Ni3Al have a composition similar to the matrix composition, boundaries in Ni-rich Ni3Al can be highly Ni-enriched. The addition of B to Ni3Al produces Ni enrichment in grain boundar...

  13. Thermodynamic reassessment of Gd–Ni system

    Energy Technology Data Exchange (ETDEWEB)

    Rahou, Z., E-mail: rahou.zakarea@gmail.com; Mahdouk, K.

    2015-11-05

    By means of CALPHAD (CALculation of PHAse Diagrams) approach, the phase diagram and thermodynamic data of the Gd–Ni system were critically assessed. The Gd–Ni system contains four solution phases (liquid, face-centered cubic FCC-A1, body-centered cubic BCC-A2 and hexagonal close-packed HCP-A3) modeled with the Redlich-Kister polynomials and seven intermetallic compounds Gd{sub 3}Ni, GdNi, GdNi{sub 2}, GdNi{sub 3}, Gd{sub 2}Ni{sub 7}, GdNi{sub 5} and Gd{sub 2}Ni{sub 17}, which are all treated as stoichiometric compounds. A set of self-consistent thermodynamic parameters describing various phases in this binary system was obtained. The phase diagram and thermodynamic quantities calculated from assessed parameters agree well with experimental data.

  14. Electron Density Distributions for Millerite, Vaesite , Heazlewoodite and Ni metal: A Case for the Importance of NiNi Bond Paths for Electron Transport

    Science.gov (United States)

    Ross, N. L.; Gibbs, G. V.; Downs, R. T.; Prewitt, C. T.; Rosso, K. M.; Cox, D. F.

    2006-12-01

    Bond paths and the bond critical point properties have been calculated for the bonded interactions comprising the Ni sulfide minerals millerite, vaesite and heazlewoodite and Ni metal. The experimental NiS bond lengths decrease linearly as the magnitudes of the properties each increases in value. Bond paths exist between the Ni atoms in heazlewoodite and millerite for NiNi separations that match the shortest separation in Ni metal, an indicator that the Ni atoms are bonded. Bond paths also exist between the Ni atoms in bulk Ni metal. In addition, the bcp properties of the bonded interactions in Ni metal are virtually the same as those in heazlewoodite and millerite. In contrast, NiNi bond paths are absent in vaesite where the NiNi separations are 60% greater than those in Ni metal. The bcp properties for the NiNi bonded interactions scatter along protractions of the NiS bond length-bcp property trends, suggesting that the two bonded interactions have similar characteristics. NiNi bond paths radiate throughout Ni metal and the metallic heazlewoodite structures as continuous networks whereas the NiNi paths in millerite are restricted to isolated Ni3 rings. Electron transport in Ni metal and heazlewoodite is pictured as occurring along the bond paths, which behave as networks of atomic size wires that radiate in a contiguous circuit throughout the two structures. Unlike heazlewoodite, the electron transport in millerite is pictured as involving a cooperative hopping of the d orbital electrons from the Ni3 rings comprising Ni3S9 clusters to Ni3 rings in adjacent clusters via the p orbitals on the interconnecting S atoms. Vaesite, an insulator at low temperatures and a doped semiconductor at higher temperatures, lacks NiNi bond paths.

  15. Submicron particles of Co, Ni and Co–Ni alloys

    Indian Academy of Sciences (India)

    P Saravanan; T A Jose; P John Thomas; G U Kulkarni

    2001-10-01

    Magnetic sub-micron sized particles (with diameters in the range 100–600 nm) of Co, Ni and Co–Ni alloys, protected with polyvinylpyrrolidone have been prepared in gram quantities using the polyol process. Experiments carried out with different metal precursors and starting compositions have yielded reliable routes to produce particles of the desired diameters in the 100–600 nm range. The particles were characterized with X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, thermogravimetric analysis and magnetic measurements. The particles are found to be stable under ambient conditions indefinitely. The coercivity values of the Co and Ni particles are ∼ 50% higher compared to the corresponding bulk values. The alloy particles follow a trend similar to the bulk alloys.

  16. Ni putes ni soumises. Media and women with other gender?

    Directory of Open Access Journals (Sweden)

    THIÉBLEMONT Sylvie

    2014-12-01

    Full Text Available Since 2000, new women's movements emerge like Ni putes ni soumises (NPNS who give a new approach to activism: not the one on feminists in the classi- cal sense of the term with the connotations it carries, but women carrying claims in the media and through the media on the living conditions of the residents of the suburbs. So, many media will take part in the mediatization of NPNS and its dis-courses, and will serve in some way as a place of “factory” for the public opinion.

  17. Effects of plate thickness on reverse martensitic transformation of prestrained NiTi/NiTi alloy

    Institute of Scientific and Technical Information of China (English)

    YAN Zhu; CUI Lishan; ZHENG Yanjun

    2007-01-01

    In this Paper, differential scanning calorimeter (DSC)was used to study the effects of predeformation and plate thickness on the reverse martensitic transformation of explosively welded NiTi/NiTi alloy.Results showed that there was a constraint between Ni50.4Ti(NiTi-1)and Ni49.8Ti (NiTi-2),which led to that the thickness of NiTi-1 or NiTi-2 strongly affected the reverse martensitic transformation behavior because residual stress variations in thickness wound enable bias force to be built inside the composite.The DSC measurements showed that after deformation,the reverse martensitic transformation temperature of the composite was increased with the increasing thickness of NiTi-2.Also.the XRD results revealed that the microstructure of NiTi/NiTi alloy changed from B2 phase to B19'phase along the thickness direction.

  18. Preparation and property of duplex Ni-B-TiO2/Ni nano-composite coatings

    Science.gov (United States)

    Wang, Shu-Jen; Wang, Yuxin; Shu, Xin; Tay, Seeleng; Gao, Wei; Shakoor, R. A.; Kahraman, Ramazan

    2015-03-01

    The duplex Nickel-Boron-Titania/Nickel (Ni-B-TiO2/Ni) coatings were deposited on mild steel by using two baths with Ni as the inner layer. TiO2 nanoparticles were incorporated into the Ni-B coatings as the outer layer by using solid particle mixing method. The microstructure, morphology and corrosion resistance of the duplex Ni-B-TiO2/Ni nanocomposite coatings were systemically investigated. The results show that the duplex interface was uniform and the adhesion between two layers was very good. The microhardness of duplex Ni-B-TiO2/Ni coating was much higher than the Ni coating due to the outer layer of Ni-B-TiO2 coating. The corrosion resistance of the duplex Ni-B-TiO2/Ni coating was also significantly improved comparing with single Ni-B coating. The Ni-B-10 g/L TiO2/Ni coating was found to have the best corrosion resistance among these duplex coatings. This type of duplex Ni-B-TiO2/Ni coating, with high hardness and good corrosion resistance properties, should be able to find broad applications under adverse environmental conditions.

  19. The Ni-YSZ interface

    DEFF Research Database (Denmark)

    Jensen, Karin Vels

    The anode/electrolyte interface in solid oxide fuel cells (SOFC) is known to cause electrical losses. Geometrically simple Ni/yttria-stabilised zirconia (YSZ) interfaces were examined to gain information on the structural and chemical changes occurring during experiments at 1000°C in an atmosphere...... content (99.8% Ni and 99.995% Ni) were used to examine the impact of impurities on the polarisation resistance and contact area morphology. The electropolished nickel wires were pressed against a polished 8 mol% YSZ surface. Extensive structural changes from a flat interface to a hill and valley structure...... between polarised and non-polarised samples. With pure nickel wires, however, the microstructures depended on the polarisation/non-polarisation conditions. At non-polarised conditions a hill and valley type structure was found. Anodic polarisation produced an up to 1 μm thick interface layer consisting...

  20. Thermal modeling of NiH2 batteries

    Science.gov (United States)

    Ponthus, Agnes-Marie; Alexandre, Alain

    1994-01-01

    The following are discussed: NiH2 battery mission and environment; NiH2 cell heat dissipation; Nodal software; model development general philosophy; NiH2 battery model development; and NiH2 experimental developments.

  1. Assessment of fatigue life for a crack emanated from a notch. ; Algorithm of fatigue life assessment by [delta]K[sub RP] approach without distinguishing between the crack Initiaion and the propagation. Kirikakitei kara hasseisuru bishi bisho kiretsu no hiro kiretsu jumyo hyokaho ni tsuite. ; Hassei to denpa no toitsu riron ni yoru jumyo yosoku no algorithm (RPG kijun ni yoru hiro kiretsu denpa kyodo no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    Toyosada, M.; Niwa, T. (Kyushu University, Fukuoka (Japan). Faculty of Engineering)

    1993-08-01

    Fatigue life has been estimated as a sum of crack initiation life and crack propagation life, by using a fracture dynamical method. In order to make the method more reliable, a method is being discussed to estimate a growth curve for fatigue cracks from notch bottom under a unified theoretical system without a need of introducing the presence of initial cracks. Subsequently to the previous report, this paper describes a fatigue test that uses CT test pieces with the notch bottom finished in arc, an investigation on initiation and propagation behaviors of micro cracks, and discussions on their possibilities. From a large number of findings obtained, an algorithm was proposed to estimate the crack growth curve in approximation. The proposal was made by introducing a hypothesis that the growth of compressed plastic region is restricted by such a barrier as crystal particle boundaries until a developed crack can reach the first crystal particle boundary when the effective loading is maintained constant. The estimated curves and the experimental results have agreed well with each other. Stagnating crack phenomenon at a notch bottom and coaxing effect were explained qualitatively. 30 refs., 24 figs.

  2. Comprehensive theoretical studies on the low-lying electronic states of NiF, NiCl, NiBr, and NiI.

    Science.gov (United States)

    Zou, Wenli; Liu, Wenjian

    2006-04-21

    The low-lying electronic states of the nickel monohalides, i.e., NiF, NiCl, NiBr, and NiI, are investigated by using multireference second-order perturbation theory with relativistic effects taken into account. For the energetically lowest 11 lambda-S states and 26 omega states there into, the potential energy curves and corresponding spectroscopic constants (vertical and adiabatic excitation energies, equilibrium bond lengths, vibrational frequencies, and rotational constants) are reported. The calculated results are grossly in very good agreement with those solid experimental data. In particular, the ground state of NiI is shown to be different from those of NiF, NiCl, and NiBr, being in line with the recent experimental observation. Detailed analyses are provided on those states that either have not been assigned or have been incorrectly assigned by previous experiments.

  3. CONFIGURATION-INTERACTION IN NI METAL AND NI-ALLOYS AND HIGH-ENERGY SPECTROSCOPY

    NARCIS (Netherlands)

    TANAKA, A; JO, T; SAWATZKY, GA

    1992-01-01

    We discuss the electronic state of Ni atoms in Ni metal and of Ni impurity in Cu and Au metals from the viewpoint of 3d configuration interaction (CI) using the Anderson impurity model including atomic multiplets. On the basis of the discussion, we give an interpretation for the Ni 2p-core X-ray pho

  4. Density of Liquid Ni-Cr Alloy

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The density of liquid Ni-Cr alloy was measured by a modified sessile drop method. The density of liquid Ni-Cr alloywas found to decrease with increasing temperature and Cr concentration in the alloy. The molar volume of liquidNi-Cr alloy increases with increasing the Cr concentration in the alloy. The molar volume of Ni-Cr alloy determinedin the present work shows a positive deviation from the linear molar volume.

  5. On the similarity of the bonding in NiS and NiO

    Science.gov (United States)

    Bauschlicher, C. W., Jr.

    1985-01-01

    The bonding in NiS is found to be quite similar to that in NiO, having an ionic contribution arising from the donation of the Ni 4s electron to the S atom and a covalent component arising from bonds between the Ni 3d and the S 3p. The one-electron d bonds are found to be of equal strength for NiO and NiS, but the two-electron d bonds are weaker for NiS.

  6. How carbon nanofibers attach to Ni foam.

    NARCIS (Netherlands)

    Chinthaginjala, J.K.; Thakur, D.B.; Seshan, Kulathuiyer; Lefferts, Leonardus

    2008-01-01

    A stable Carbon-Nano-Fiber (CNF) layer was catalytically grown on Ni foam by decomposing ethylene. Scanning electron microscopy of the cross-section of the deposited layer on Ni foam revealed the presence of two distinct carbon layers; an apparently dense layer (‘C-layer’) at the carbon–Ni interface

  7. Mechanisms of High Coercivity in Ni/NiO Composite Films by Post Annealing

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A coercivity as large as 2.4 kOe has been achieved in the Ni/NiO composite film after an annealing under a magnetic field of 10 kOe and an O2 partial pressure of 0.001 torr. The coercivity was attributed to the strong exchange coupling of Ni and NiO. Small grain size of Ni and NiO was observed after the post-annealing. The enhanced coercivity is probably associated with the domain wall pinning by local energy minima, the distribution of Ni and NiO, and the domain structure in the interface of Ni/NiO generated under the presence of the magnetic field during the post-annealing.

  8. Effects of chemical coating with Ni on electrochemical properties of Mg2Ni hydrogen storage alloys

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The effects of nickel coating on the electrochemical properties of Mg2Ni hydrogen storage alloys are presented in this paper. X-ray diffraction (XRD) and scanning electron microscope (SEM) techniques were employed to examine the crystal structure and surface morphologies of the bare and Ni-coated Mg2Ni alloys. The electrochemical properties of alloys were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results showed that Ni coating not only decreased the charge transfer resistance, but also decreased the H atom diflusion resistance for Mg2Ni alloys. It was also found that Ni coating effectively improved the discharge capacity, but decreased the cycling performance of the as-synthesized Ni-coated Mg2Ni alloys. The discharge current has a great impact on the cycling performance of the as-synthesized Ni-coated Mg2Ni alloys.

  9. Ashy storm-petrel at-sea density off California

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Office of National Marine Sanctuaries (ONMS) updates and revises the management plans for each of its 13 sanctuaries. This process, which is open to the public,...

  10. 阿是穴释义%Conception of Ashi points

    Institute of Scientific and Technical Information of China (English)

    胥荣东; 李珩

    2005-01-01

    针对目前针灸学界对于"阿是穴"概念模糊的问题,对阿是穴的起源及释义进行了文献上的考证,提出阿是穴不等同于"压痛点"及"不定穴,天应穴";阿是穴是机体疾病状况下出现的包括经穴和奇穴在内的特殊反应点,以按之快然为主要特征,有时也表现为疼痛.并对阿是穴的含义、定位和临床取穴方法提出己见.

  11. Kitaitsõ udivljajut v AShI / Irina Kiviselg

    Index Scriptorium Estoniae

    Kiviselg, Irina, 1961-

    2004-01-01

    Hiina noorte kunstnike gravüüride ja eksliibriste näitus Ahtme kunstide kooli näitusegaleriis. Ekspositsioon on kokku pandud rahvusvahelisele lastetööde konkursile "Kunst, mäng või looming" saadetud töödest. Aleksander Dikushenko kommentaarid

  12. Ashi Point Research%阿是穴考释

    Institute of Scientific and Technical Information of China (English)

    张巍; 宋媛媛

    2009-01-01

    从阿是穴探源及科学定义、阿是穴出现机理、阿是穴表现形式、阿是穴有效治疗手段分析等对阿是穴作了考释.指出:阿是穴之异在于不定位的存在,体表的不定说明除已知穴位外,皮部、络脉(孙络、浮络)的参与,深浅的不定说明了经别、别络、经筋的参与.其中气血等精微物质在信息传递中发挥着重要作用.

  13. Kinetics of Ni sorption in soils: roles of soil organic matter and Ni precipitation.

    Science.gov (United States)

    Shi, Zhenqing; Peltier, Edward; Sparks, Donald L

    2012-02-21

    The kinetics of Ni sorption to two Delaware agricultural soils were studied to quantitatively assess the relative importance of Ni adsorption on soil organic matter (SOM) and the formation of Ni layered double hydroxide (Ni-LDH) precipitates using both experimental studies and kinetic modeling. Batch sorption kinetic experiments were conducted with both soils at pH 6.0, 7.0, and 7.5 from 24 h up to 1 month. Time-resolved Ni speciation in soils was determined by X-ray absorption spectroscopy (XAS) during the kinetic experiments. A kinetics model was developed to describe Ni kinetic reactions under various reaction conditions and time scales, which integrated Ni adsorption on SOM with Ni-LDH precipitation in soils. The soil Ni speciation (adsorbed phases and Ni-LDH) calculated using the kinetics model was consistent with that obtained through XAS analysis during the sorption processes. Under our experimental conditions, both modeling and XAS results demonstrated that Ni adsorption on SOM was dominant in the short term and the formation of Ni-LDH precipitates accounted for the long-term Ni sequestration in soils, and, more interestingly, that the adsorbed Ni may slowly transfer to Ni-LDH phases with longer reaction times.

  14. Synthesis and catalytic performance of SiO2@Ni and hollow Ni microspheres

    Science.gov (United States)

    Liu, Xin; Liu, Yanhua; Shi, Xueting; Yu, Zhengyang; Feng, Libang

    2016-11-01

    Nickel (Ni) catalyst has been widely used in catalytic reducing reactions such as catalytic hydrogenation of organic compounds and catalytic reduction of organic dyes. However, the catalytic efficiency of pure Ni is low. In order to improve the catalytic performance, Ni nanoparticle-loaded microspheres can be developed. In this study, we have prepared Ni nanoparticle-loaded microspheres (SiO2@Ni) and hollow Ni microspheres using two-step method. SiO2@Ni microspheres with raspberry-like morphology and core-shell structure are synthesized successfully using SiO2 microsphere as a template and Ni2+ ions are adsorbed onto SiO2 surfaces via electrostatic interaction and then reduced and deposited on surfaces of SiO2 microspheres. Next, the SiO2 cores are removed by NaOH etching and the hollow Ni microspheres are prepared. The NaOH etching time does no have much influence on the crystal structure, shape, and surface morphology of SiO2@Ni; however, it can change the phase composition evidently. The hollow Ni microspheres are obtained when the NaOH etching time reaches 10 h and above. The as-synthesized SiO2@Ni microspheres exhibit much higher catalytic performance than the hollow Ni microspheres and pure Ni nanoparticles in the catalytic reduction of methylene blue. Meanwhile, the SiO2@Ni catalyst has high stability and hence it can be recycled for reuse.

  15. Structural evaluation and nonlinear optical properties of Ni/NiO, Ni/NiCo2O4 and Co/Co3O4 nanocomposites

    Science.gov (United States)

    Rahulan, K. Mani; Padmanathan, N.; Philip, Reji; Balamurugan, S.; Kanakam, Charles C.

    2013-10-01

    Nanocomposites of Ni/NiO, Ni/NiCo2O4 and Co/Co3O4 have been synthesized by a chemical reduction technique. X-ray diffraction (XRD) and transmission electron microscopy (TEM) images confirm the mixed composite nature of the sample and uniform particle size of approximately 13 nm. Formation of Ni/NiCo3O4 solid solution or NiCo2O4 spinel phase in the mixed composite is confirmed by energy dispersive X-ray (EDX) spectrum. Magnetic hysteresis (M-H) curves of the nanocomposites show excellent ferromagnetic (FM) nature at room temperature. Nonlinear optical transmission of the nanocomposites is measured using the open aperture Z-scan technique employing 7 nanosecond laser pulses at 532 nm. Experimental results show that NiO/NiO-Co3O4/Co3O4 nanocomposites exhibit good optical limiting performance. From the measurements and numerical fitting of the data to theory, it is found that nonlinear absorption has contributions from excited state absorption and two-photon absorption. Optical limiting is enhanced in Co3O4 and Ni/NiCo2O4 in which the Co3O4 content has a larger volume ratio.

  16. Continuum mechanics simulations of NiO/Ni-YSZ composites during reduction and re-oxidation

    DEFF Research Database (Denmark)

    Pihlatie, Mikko; Frandsen, Henrik Lund; Kaiser, Andreas;

    2010-01-01

    for the dimensional change arises from the volumetric change related to the phase change NiO ↔ Ni. The measurable change in bulk length is given by the ceramic YSZ backbone as a response to the stress created by the chemical strain. The different subprocesses described in the model for YSZ were elastic and anelastic...... expansion, diffusional creep, grain boundary sliding (GBS) and microcracking due to excessive stress. In the Ni/NiO phase, nonelastic strains in terms of diffusional and power law creep were implemented, and additionally for NiO deformation due to microcracking and/or pseudoplasticity. Semi......-empirical correlations were employed for creep limiting grain growth of Ni and NiO, particle coarsening of Ni and particle growth in NiO during the oxidation. Seven experimental cases of high temperature redox dilatometry were simulated. The model shows good qualitative agreement with the measurements. The different...

  17. On the wave induced responses for a high-speed hydrofoil catamaran. Part 1. Cabin connected to hull by spring and its riding comfort in waves; Suichuyokutsuki kosoku sodotei no harochu oto ni tsuite. 1. Dokuritsu kozogata cabin to harochu norigokochi

    Energy Technology Data Exchange (ETDEWEB)

    Saito, K.; Nobukawa, H.; Honda, Y. [Hiroshima University, Hiroshima (Japan)

    1996-04-10

    Riding comfort in a cabin of a high-speed hydrofoil catamaran was evaluated by comparing with that in ordinary boats as to acceleration in the vertical direction as one of the responses of the catamaran in waves. First, an equation of motion in waves was introduced, and considerations were given while comparing the result of calculations in regular waves with that of model experiments. Comparison and verification were also performed on response characteristics in irregular waves. A new-type boat, whose cabin is supported with four springs, and provided with hydrofoils in front and rear thereof, was verified to have much less motions of the catamaran bodies and the cabin than in the ordinary boats both in regular and irregular waves. This result was proven by numerical calculations and model experiments. Hydrofoils affect largely the reduction in motions. The correlational data between the results of calculations and experiments are considered sufficient to provide design data, although there are still some points to be improved. These results revealed that the riding comfort of the new-type boat has been improved over that in the ordinary boats. 6 refs., 11 figs., 3 tabs.

  18. Reaction mechanism of coal liquefaction: hydrogenolysis of model compound using synthetic pyrite as catalysts. 7. Property change of synthetic pyrite catalyst with the time after production; Sekitan ekika hanno kiko (model kagobutsu no hanno). 7. Gosei ryukatetsu shokubai no keiji henka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Ito, H.; Meno, H.; Uemaki, O.; Shibata, T.; Tsuji, T. [Hokkaido University, Sapporo (Japan)

    1996-10-28

    Reactions of various model compounds were investigated using synthetic pyrites for coal liquefaction. In this study, successive changes of the catalysts were investigated from the reactions of model compounds by using three different synthetic pyrites with the lapse of time after production. Benzyl phenyl ether, dibenzyl, and n-octylbenzene were used as model compounds. Reactions were conducted in an autoclave, into which sample, catalyst, decalin as solvent, and initial hydrogen pressure 10 MPa were charged. The autoclave was held at 450 or 475{degree}C of reaction temperature for 1 hour. The catalyst with a shorter lapse of time after production acted to hydrogen transfer, and inhibited the formation of condensation products due to the stabilization of decomposed fragment. It also acted to isomerization of materials by cutting alkyl side chains. When adding sulfur to the catalyst with longer lapse of time after production under these reaction conditions, it inhibited the formation of condensation products for the reaction of benzyl phenyl ether. However, it did not provide the effect for the reaction of n-octylbenzene. 5 refs., 3 figs.

  19. Analysis of energy demand-supply of city and evaluation of energy conservation and peak suppression of environmental symbiosis city; Toshi no energy jukyu bunseki to shoene toshi no shoene fuka heijunka koka no hyoka (kankyo kyosei sho energy wo mezashita 60 mannin shintoshi ni tsuite no kento)

    Energy Technology Data Exchange (ETDEWEB)

    Iwatsubo, T.; Hashimoto, K. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1997-05-01

    The paper developed an analysis method of the energy supply/demand structure of city and compared the conventional city and a city considering energy conservation. An energy supply/demand flow chart was newly proposed. From this flow chart, `energy sustainability ratios` was proposed as a new index for comprehensively evaluating two elements of the energy conservation by load reduction and heightening of energy conversion rates and the utilization of waste heat and renewable energy. A method for analysis of the energy supply/demand structure of city was developed including daily supply/demand patterns in the area where individual equipment in every residence/building correspond to the energy supply and the area where centralized energy systems such as district energy supply correspond it. From the developed analysis method, analysis was made of a newly developed city with a 0.6 million population in terms of the conventional city and energy conservation city, to clarify the present energy supply/demand structure of city and to express it in an energy flow chart. At the same time, validity of the analysis method and evaluation indexes were confirmed by comparing the conventional city and energy conservation city. 15 refs, 27 figs., 17 tabs.

  20. Report on the surveys in fiscal 1999 on the demonstrative investigation of a new load leveling method. Participation to the IEA/DSM task VI, an IEA international cooperation project; 1999 nendo fuka heijunka shinshuho jissho chosa hokokusho. IEA kokusai kyoryoku jigyo IEA/DSM task VI eno sanka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Participation was implemented to the IEA/DSM task VI as the demonstrative investigation of a new load leveling method. The DSM strategy is a means to achieve the public objectives of wide range, wherein the DSM mechanism is important, that can obtain accurate and useful information in competitive markets. Consumer protecting activities have close relation with general information needs. A financial incentive mechanism is also necessary to support nurturing of business organizations and new ESCO industries. A market forming mechanism using the DSM can solve the problem of disagreement in the incentives (for example, private profit of electric power companies and the public nature of the government). These include system plans considering the DSM, setting of upper limit in the profit, demand side bidding, and green charge institution. It is important to utilize affluent findings and means used in the past and utilize each mechanism to meet the needs for public benefit at the present and in the future, while structuring an electric power business structure incorporating the DSM. The DSM promoting mechanisms in each country were classified and put into order of regulations, supports, funds, and markets. (NEDO)

  1. FY 1997 report on the verification survey of new mechanisms for load leveling. IEA`s international collaboration `Participation of Japan in IEA/DSM Task VI`; 1997 nendo chosa hokokusho (fuka heijunka shinshuho jissho chosa). IEA kokusai kyoryoku jigyo `IEA/DSM task IV eno sanka ni tsuite`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Current electricity markets in Europe and the USA are drastically changing due to the introduction of competition principle and the reconsideration of business systems. Are also changing the activities and their forms of DSM (demand side management) for load leveling which has been conventionally conducted by electricity companies for the efficient operation of facilities. Task IV and Task VI aim at developing new mechanisms to promote DSM in the changing electricity markets as well as disseminating and communicating information on the new mechanism. Japan participates in Sub-task IV/6 and 7 and Task VI. Activities for developing new mechanisms are divided into Phase 1 and Phase 2. The Phase 1 includes review of existing mechanisms and preliminary development and evaluation of new mechanisms. The Phase 2 includes the detailed development of new mechanisms and evaluation criteria, communication and information about mechanisms, and identification of the public policy implications which would follow a decision by the responsible authorities to implement each of various DSM mechanisms. The time frame of Phase 1 is between February 1996 and March 1997, and that of Phase 2 is between January 1997 and December 1999. 2 figs., 4 tabs.

  2. FY1998 survey on IEA international cooperation project on demonstration and survey of new load leveling methods (participation in the IEA/DSM task VI); 1998 nendo fuka heijunka shinshuho jissho chosa IEA kokusai kyoryoku jigyo 'IEA/DSM task 6 eno sanka ni tsuite' chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    It is intended to participate in the IEA international cooperation project related to DSA, exchange items of information, and promote demonstration and survey of new load leveling methods. The existing and newly proposed DSM mechanisms as the achievement of the previous tasks were put into order. The arena of information exchange and discussions was prepared through use of the Internet homepage for the IEA/DSM implementation agreement. Necessary official policies were also made available. Points of precautions when the mechanisms of other countries are used in Japan: the key to the success depends on social or cultural situations that work as the base; therefore, comparisons and analyses are necessary on such elements as customers as the object, energy projects and governments; compatibility of the situation and pattern of the demand side with the DSM technologies governs the reasonability thereof; the types of the mechanisms are narrowed down by size of the customer division, consumption pattern, electric power quality and safety, and needs on the flexibility; proliferation levels of the DSM technologies determine the appropriate mechanisms; and how the DSM is conceived against the final consumption is governed by the conception by both of the customers and the government. (NEDO)

  3. Fiscal 2000 survey report. Survey for verification of new load levelling technique - IEA international joint project (Participation in IEA/DSM task); 2000 nendo fuka heijunka shuho jissho chosa hokokusho. IEA kokusai kyoryoku jigyo 'IEA/DSM task eno sanka ni tsuite'

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Japan participated in IEA/DSM (International Energy Agency/demand side management) Task X (performance contracting) for collecting information on energy service contracting business designed to promote load levelling centered DSM activities on the basis of market principles for achieving efficient operation of facilities. Task X aims to adjust and popularize the energy service contracting business. In the energy service contracting business, the facility related party and the energy service related party work under a contract to enhance efficiency of facility operation, and share the gains between them. In concrete terms, information was collected and exchanged at the 14th and 15th executive committee meeting of IEA/DSM Task X (Turkey in April 2000, Sweden in September 2000); new task preparation conference (Sweden in September 2000); 1st specialist conference (France in February 2001); and 17th annual convention of All-America ESCO (energy service company) Council (U.S. in November 2000). (NEDO)

  4. Chemical and geochemical study on the hot spring. Affecting factor of pH and the origin of chemical constituents in Dogo spring; Onsen no chikyu kagakuteki kosatsu. Dogo onsen no pH chi kettei inshi to kagaku seibun no kigen ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Maki, T.; Ishimaru, T.; Tagashira, K.; Ono, C. [Ehime Prefectural Inst. of Public Health, Ehime (Japan)

    1994-12-31

    Dogo Spring is a non-volcanic hot spring (not a spring that gushes up in association with live volcanic activities) and located about 10 kilometers away from the coast line. Therefore, the spring water quality is not affected by these geological environments, allowing the interactions with the mother rock to be identified relatively easily. In order to investigate the relationship between chemical constituents in the hot spring and the mother rock, a leaching test was carried out on boring-cores and representative rocks existing in Ehime Prefecture. Considerations were given on the factors in the mother rock affecting the hot spring constituents, the high pH value in Dogo Spring, and the origin of the constituents. The result indicated that pH value in the leaching solution from the boring-cores taken from Dogo Spring is higher than that in the leaching solution from representative rocks in Ehime Prefecture; it suggested that the high pH value in Dogo Spring is correlated to the gushing mother rock (Ryoke granite); it also suggested that the Dogo Spring water has about the same concentration as in the dissolved constituents in the leaching solution from the Dogo Spring boring-cores, and the dissolved constituents in the Dogo Spring water is closely related with the composing mother rock (Ryoke granite). 12 refs., 9 figs., 6 tabs.

  5. Enhancement of evaporation of droplet using EHD effect. 2nd Report. ; Onset of instability of gas-liquid interface under electric field. EHD koka wo mochiita ekiteki no johatsu sokushin. 2. ; Denba no moto deno kieki kaimen no fuantei gensho ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Takano, K.; Tanasawa, I.; Nishio, S. (tokyo University, Tokyo (Japan). Institute of Industrial Science)

    1991-12-25

    Evaporation is accelerated when an electric field is applied to droplets evaporating in a spheroid condition. To identify the correlation with an liquid column generated at the bottom of the droplet in the accelerated evaporation, experiments and analyses were carried out by applying electric fields onto horizontal free surfaces of several kinds of liquid. The minimum voltage (critical voltage) at which a turbulence occurs on the free liquid surface can be analyzed as a stability problem on the interface turbulence when pressure, gravitational force, surface tension and electrical power act upon the two-dimensional horizontal free liquid surfaces. From the fact that the critical voltage analytic values on the unstable generation agree well with the experimental results, this analytic method was expanded and calculated to predict the upper limit of the evaporation accelerating temperature (the heat transfer face temperature at which the unstable turbulence wavelength becomes equal to the droplet's bottom diameter) when an electric field is applied to droplets generating in the spheroid condition. The analysis agreed with the experimental result qualitatively. Therefore, the solid-liquid contact in a liquid column that is generated when an electric field is applied to droplets evaporating in a spheroid condition suggests a close correlation with the interface instability. 15 refs., 13 figs., 1 tab.

  6. 43rd annual meeting of the Society of Coal Mining Engineers. Part 3. Coalbed methane activity in the U.S.A.; 1994 nendo (dai 43 kai) zenkoku tanko gijutsukai taikai koenshu. 3. Amerika no tanso gas kaihatsu genkyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tamari, A. [Coal Mining Research Center, Tokyo (Japan)

    1994-09-20

    Hitherto, the coalbed methane gas gushing out accompanied by the coal mining is only emphasized as the obstacle on the viewpoint of safety of colliery in disregard of the fact that a part thereof has been gathered and used for a long time. However, in the overseas coal producing countries having rich coal resources, the evaluation on said coalbed methane as the clean and new energy has been raised in these years, and also from the stand of decreasing the release of methane which is one of the main reasons causing the warming of the earth the researches and the technical development are carried out for the active reclamation thereof. Especially, the coalbed methane activity in the United States shows a rapid growth as the important supplying resource of clean energy shouldering a general part of the natural gas resource in the future. In this paper, simultaneously with the description of the resource and production of coalbed methane the United States, the practical status of San Juan Basin and Black Warrior Basin as the representative coalfield is described. At last, the ventilation technique of coalbed methane in Jim Walter Resources Company are introduced. 3 refs., 12 figs., 1 tab.

  7. Monoligated monovalent Ni: the 3d(Ni)9 manifold of states of NiCu and comparison to the 3d9 States of AlNi, NiH, NiCl, and NiF.

    Science.gov (United States)

    Rothschopf, Gretchen K; Morse, Michael D

    2005-12-22

    A dispersed fluorescence investigation of the low-lying electronic states of NiCu has allowed the observation of four out of the five states that derive from the 3d(Ni)9 3d(Cu)10 sigma2 manifold. Vibrational levels of the ground X2delta(5/2) state corresponding to v = 0-11 are observed and are fit to provide omega(e) = 275.93 +/- 1.06 cm(-1) and omega(e)x(e) = 1.44 +/- 0.11 cm(-1). The v = 0 levels of the higher lying states deriving from the 3d(Ni)9 3d(Cu)10 sigma2 manifold are located at 912, 1466, and 1734 cm(-1), and these states are assigned to omega values of 3/2, 1/2, and 3/2, respectively. The last of these assignments is based on selection rules and is unequivocal; the first two are based on a comparison to ab initio and ligand field calculations and could conceivably be in error. It is also possible that the v = 0 level of the state found at 912 cm(-1) is not observed, so that T0 for the lowest excited state actually lies near 658 cm(-1). These results are modeled using a matrix Hamiltonian based on the existence of a ground manifold of states deriving from the 3d9 configuration on nickel. This matrix Hamiltonian is also applied to the spectroscopically well-known molecules AlNi, NiH, NiCl, and NiF. The term energies of the 2sigma+, 2pi, and 2delta states of these molecules, which all derive from a 3d9 configuration on the nickel atom, display a clear and understandable trend as a function of the electronegativity of the ligands.

  8. Bipolar resistive switching of Au/NiOx/Ni/Au heterostructure nanowires

    Science.gov (United States)

    Brivio, S.; Perego, D.; Tallarida, G.; Bestetti, M.; Franz, S.; Spiga, S.

    2013-10-01

    Arrays of Au/NiOx/Ni/Au nanowires with a diameter of 50 nm were characterized by conductive atomic force microscopy, which was used to probe the electrical behavior of single nanowires still included in the array. A bipolar switching of the single Au/NiOx/Ni/Au nanowires is demonstrated and is attributed to the choice of an asymmetric couple of electrode materials and, possibly, to a non-uniform Ni oxidation profile inside the NiOx segments. An analysis of the conduction mechanism in a single nanowire is presented to further support this conclusion.

  9. Study on Transfer of Ni in Soil—Plant System Using 63Ni Tracer Method

    Institute of Scientific and Technical Information of China (English)

    TUCONG

    1996-01-01

    A study was carried out on the transfer of native and added Ni towards plant both in different soils and at different time by using 63 Ni tracer technique.The transfer of added Ni in soil was greater than native Ni and declined as time increased.The mobility was greater for soluble plus exchangeable fraction of soil Ni but very smaller for residual and Fe/Mn oxide bound fractions.These indicated that Ni was more mobile and more harmful in soils with a low pH and /or low content of Fe/Mn oxides.

  10. Manufacture of Raney Ni catalyst with metastable Ni2Al3 by high—energy milling

    Institute of Scientific and Technical Information of China (English)

    滕荣厚; 马如璋; 等

    1999-01-01

    The Ni-Al alloy containing Cr,Fe additives were prepared as Raney Ni Catalyst by high energy milling.The size and surface state of Ni-Al alloy powder were studied by particle size analyzer and sanning electron microscopy.the Structure was analyzed by XRD and Moessbauer methods.The results showed that after a high-energy milling(HEM).the Ni-Al alloy transforms to a nano-scale NiAl structure with rich Al.By annealing the alloy,a metastable Ni2Al3 phase can be obtained.

  11. Manufacture of Raney Ni catalyst with metastable Ni2Al3 by high-energy milling

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    The Ni-Al alloy containing Cr, Fe additives were prepared as Raney Ni catalyst by high energy milling. The size and surface state of Ni-Al alloy powder were studied by particle size analyzer and sanning electron microscopy, the structure was analyzed by XRD and Mossbauer methods. The results showed that after a high-energy milling (HEM), the Ni-Al alloy transforms to a nano-scale NiAl structure with rich Al. Byannealing the alloy, a metastable Ni2Al3 phase can be obtained.

  12. El niño

    OpenAIRE

    Fernández Freire, Carlos; Aristizábal, Julio

    2015-01-01

    Aquella Navidad Pedro estaba triste porque no paraba de llover y su padre, pescador, regresaba a casa desanimado con las redes vacías. El abuelo de Pedro, otro viejo pescador, consiguió cambiar el semblante de su pequeño nieto contándole las bondades del pronóstico del tiempo. Conoce el fenómeno de El Niño a través de este cuento.

  13. Exclusive study of Ni+Ni and Ni+Au central collisions: phase coexistence and spinodal decomposition; Etude exclusive des collisions centrales Ni+Ni et Ni+Au: coexistence de phase et decomposition spinodale

    Energy Technology Data Exchange (ETDEWEB)

    Guiot, B

    2002-12-01

    The INDRA multidetector allowed us to study the Ni+Ni collisions at 32A MeV and the Ni+Au collisions at 52,4 MeV. Central collisions leading to 'quasi-fused' systems were isolated using multidimensional analysis techniques: the Discriminant Analysis and the Principal Component Analysis. Comparison with a statistical model shows that the selected events are compatible with thermodynamical equilibrium. The average thermal excitation energy is 5A MeV for both systems. Calculations of heat capacities show that the deexcitation of the hot sources are akin to a liquid-gas phase transition of nuclear matter. Indeed heat capacities exhibit a negative branch as expected for a phase transition of a finite system. The dynamics of this phase transition has been investigated by applying the charge correlation method. An enhanced production of events with equal-sized fragments has been evidenced for Ni+Au at 52A MeV. No signal was found for Ni+Ni at 32A MeV. Finally this method was improved by taking into account the total charge conservation. The signal is seen more clearly for Ni+Au at 52A MeV, but is ambiguous for Ni+Ni at 32A MeV. The path followed in the state diagram, or the involved time scales, seem to be different for these systems. (authors)

  14. niños preescolares

    Directory of Open Access Journals (Sweden)

    Claudia Rosario Portilla Ramírez

    2007-01-01

    Full Text Available Este estudio explora la relación entre la escritura y la comprensión de la referencia a través de una tarea de sinonimia en niños entre 5 y 6 años de edad, de origen latinoamericano, escolarizados en Barcelona (España. Las variables relacionadas con la tarea de sinonimia fueron (a la comprensión de la entidad lingüística nombre y (b el nivel de conceptualización de la escritura de los niños y la presencia de etiquetas escritas durante la tarea. Para la tarea de sinonimia se utilizaron pares de sinónimos dialectales del español (de Latinoamérica y de la Península Ibérica. Los resultados mostraron una diferenciación en el razonamiento de los niños, la cual dependía de la comparación entre lenguaje oral y lenguaje escrito en el desarrollo de la tarea, evidenciando una mayor aceptación de la sinonimia en la modalidad de lenguaje oral que en la modalidad de lenguaje escrito.

  15. Comparison of the thermal stabilities of NiSi films in Ni/Si, Ni/Pd/Si and Ni/Pt/Si systems

    CERN Document Server

    Wang, R N

    2003-01-01

    The effects of different interlayer materials (Pd and Pt) deposited between Ni films and Si substrates on the NiSi thermal stability are discussed. Ni sub 0 sub . sub 9 sub 4 sub 3 Pd sub 0 sub . sub 0 sub 5 sub 7 Si and Ni sub 0 sub . sub 9 sub 4 sub 5 Pt sub 0 sub . sub 0 sub 5 sub 5 Si solid solutions were formed when the samples were annealed at high temperatures and the lattice parameters of Ni sub 0 sub . sub 9 sub 4 sub 3 Pd sub 0 sub . sub 0 sub 5 sub 7 Si were calculated according to Vegard's law. The NiSi thermal stability was enhanced by interposing a Pd or Pt interlayer, and the sample with the Pt interlayer had the highest NiSi thermal stability among all the samples studied. This is attributed to the reduction of the interface energy between NiSi and Si substrates and the decrease of the driving force for the nucleation of NiSi sub 2 , induced by formation of the NiSi(200) preferred orientation and the solid solution respectively.

  16. Magnetic Properties of Grain Boundaries of Nanocrystalline Ni and of Ni Precipitates in Nanocrystalline NiCu Alloys

    Science.gov (United States)

    Wolf, H.; Guan, Z.; Li, X.; Wichert, Th.

    2001-11-01

    Perturbed γγ-angular correlation spectroscopy (PAC) was used to investigate nanocrystalline Ni and NiCu alloys, which are prepared by pulsed electrodeposition (PED). Using diffusion for doping nanocrystalline Ni with 111In four different ordered grain boundary structures are observed, which are characterized by unique electric field gradients. The incorporation of 111In on substitutional bulk sites of Ni is caused by moving grain boundaries below 1000 K and by volume diffusion above 1000 K. The nanocrystalline NiCu alloys prepared by PED are microscopically inhomogeneous as observed by PAC. In contrast, this inhomogeneity cannot be detected by X-ray diffraction. The influence of the temperature of the electrolyte, the current density during deposition, and the optional addition of saccharin to the electrolyte on the homogeneity of nanocrystalline NiCu alloys was investigated.

  17. Mixing behaviors in Cu/Ni and Ni/V multilayers induced by cold rolling

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Z. [Department of Materials Science and Engineering, University of Wisconsin-Madison, 1509 University Avenue, Madison, WI 53706 (United States); Perepezko, J.H., E-mail: perepezk@engr.wisc.edu [Department of Materials Science and Engineering, University of Wisconsin-Madison, 1509 University Avenue, Madison, WI 53706 (United States); Larson, D.; Reinhard, D. [CAMECA Instruments Inc., 5500 Nobel Drive, Madison, WI 53711 (United States)

    2015-09-15

    Highlights: • The composition profiles of Cu/Ni and Ni/V multilayers were investigated. • A compositional oscillation was observed in the Cu/Ni composition profile. • The Ni/V composition profile varies smoothly and continuously between end members. • The effective diffusion coefficients were enhanced by about 30 order of magnitudes. • The effective temperature were estimated as 946 K for Cu/Ni and 936 K for Ni/V. - Abstract: Multilayers of Cu60/Ni40 and Ni70/V30 foil arrays were cold rolled in order to study the transformation reactions and mixing behaviors induced by deformation. Upon cold rolling, the layer thicknesses were refined to about 20 nm and solid solution phases were induced from pure end members (i.e. Cu, Ni and V) in both cases. The composition profiles for Cu/Ni and Ni/V multilayer samples at the deformation level where the solid solution phases coexist with end members were investigated by means of atom probe tomography and electron energy loss spectrum, respectively. An oscillation in the composition of Cu–Ni solid solution phase was observed, however the composition profile of Ni/V shows a smoothly varying curve between the end members. The effective diffusion coefficients were promoted by about 30 orders of magnitude for both Cu/Ni and Ni/V compared to room temperature diffusion. The effective temperature for Cu/Ni multilayers after 36 passes and Ni/V after 60 passes are estimated as 946 K and 936 K respectively.

  18. The impact of Ni on the physiology of a Mediterranean Ni-hyperaccumulating plant.

    Science.gov (United States)

    Roccotiello, Enrica; Serrano, Helena Cristina; Mariotti, Mauro Giorgio; Branquinho, Cristina

    2016-06-01

    High nickel (Ni) levels exert toxic effects on plant growth and plant water content, thus affecting photosynthesis. In a pot experiment, we investigated the effect of the Ni concentration on the physiological characteristics of the Ni hyperaccumulator Alyssoides utriculata when grown on a vermiculite substrate in the presence of different external Ni concentrations (0-500 mg Ni L(-1)). The results showed that the Ni concentration was higher in leaves than in roots, as evidenced by a translocation factor = 3 and a bioconcentration factor = 10. At the highest concentration tested (500 mg Ni L(-1)), A. utriculata accumulated 1100 mg Ni per kilogram in its leaves, without an effects on its biomass. Plant water content increased significantly with Ni accumulation. Ni treatment did not, or only slightly, affected chlorophyll fluorescence parameters. The photosynthetic efficiency (FV/FM) of A. utriculata was stable between Ni treatments (always ≥ 0.8) and the photosynthetic performance of the plant under Ni stress remained high (performance index = 1.5). These findings support that A. utriculata has several mechanisms to avoid severe damage to its photosynthetic apparatus, confirming the tolerance of this species to Ni under hyperaccumulation.

  19. Transparent nanostructured electrodes: Electrospun NiO nanofibers/NiO films

    Energy Technology Data Exchange (ETDEWEB)

    Lamastra, F.R. [Italian Interuniversity Consortium on Materials Science and Technology (INSTM), Research Unit Roma Tor Vergata, Via del Politecnico 1, 00133 Rome (Italy); Nanni, F. [Italian Interuniversity Consortium on Materials Science and Technology (INSTM), Research Unit Roma Tor Vergata, Via del Politecnico 1, 00133 Rome (Italy); Department of Enterprise Engineering, University of Rome Tor Vergata, Via del Politecnico 1, 00133 Rome (Italy); Menchini, F. [ENEA, CR Casaccia, Via Anguillarese 301, 00123 Rome (Italy); Nunziante, P. [Italian Interuniversity Consortium on Materials Science and Technology (INSTM), Research Unit Roma Tor Vergata, Via del Politecnico 1, 00133 Rome (Italy); Department of Chemical Sciences and Technologies, University of Rome Tor Vergata, Via della Ricerca Scientifica 1, 00133 Rome (Italy); Grilli, M.L., E-mail: marialuisa.grilli@enea.it [ENEA, CR Casaccia, Via Anguillarese 301, 00123 Rome (Italy)

    2016-02-29

    Polyvinylpyrrolidone (PVP)/nickel(II) acetate precursor fibers were deposited by electrospinning directly on radio frequency sputtered thin Ni and NiO films grown on quartz substrate, starting from Ni(II) acetate and PVP solution in ethanol. The samples were calcined in air in the temperature range 400–500 °C to obtain transparent and conductive p-type NiO nanofibers on NiO films. A higher density of nanofibers was obtained on Ni/quartz substrates, as compared to NiO/quartz ones, demonstrating the feasibility of fiber adhesion directly to an insulating substrate previously coated by a thin Ni layer. Samples were characterized by field emission-scanning electron microscopy, X-ray diffraction, spectrophotometric and resistance measurements. - Highlights: • Nanostructured electrodes: electrospun NiO nanofibers/NiO films were fabricated. • NiO fibers were directly grown on insulating substrate coated by thin Ni or NiO films. • Good quality crystalline fibers were obtained at low calcination temperatures. • Transparent and conductive p-type electrodes were fabricated.

  20. A threonine stabilizes the NiC and NiR catalytic intermediates of [NiFe]-hydrogenase.

    Science.gov (United States)

    Abou-Hamdan, Abbas; Ceccaldi, Pierre; Lebrette, Hugo; Gutiérrez-Sanz, Oscar; Richaud, Pierre; Cournac, Laurent; Guigliarelli, Bruno; De Lacey, Antonio L; Léger, Christophe; Volbeda, Anne; Burlat, Bénédicte; Dementin, Sébastien

    2015-03-27

    The heterodimeric [NiFe] hydrogenase from Desulfovibrio fructosovorans catalyzes the reversible oxidation of H2 into protons and electrons. The catalytic intermediates have been attributed to forms of the active site (NiSI, NiR, and NiC) detected using spectroscopic methods under potentiometric but non-catalytic conditions. Here, we produced variants by replacing the conserved Thr-18 residue in the small subunit with Ser, Val, Gln, Gly, or Asp, and we analyzed the effects of these mutations on the kinetic (H2 oxidation, H2 production, and H/D exchange), spectroscopic (IR, EPR), and structural properties of the enzyme. The mutations disrupt the H-bond network in the crystals and have a strong effect on H2 oxidation and H2 production turnover rates. However, the absence of correlation between activity and rate of H/D exchange in the series of variants suggests that the alcoholic group of Thr-18 is not necessarily a proton relay. Instead, the correlation between H2 oxidation and production activity and the detection of the NiC species in reduced samples confirms that NiC is a catalytic intermediate and suggests that Thr-18 is important to stabilize the local protein structure of the active site ensuring fast NiSI-NiC-NiR interconversions during H2 oxidation/production.

  1. Electroless Plated Co-Ni-P-B/Ni Foam Catalyst for Hydrogen Generation from Sodium Borohydride.

    Science.gov (United States)

    Park, Daeil; Kim, Taegyu

    2016-02-01

    Co-Ni-P-B catalyst supported on Ni foam was prepared using electroless plating for hydrogen generation from an alkaline NaBH4 solution. Co-B, Co-P-B, and Co-Ni-B were prepared for comparison. Surface morphology of catalyst/Ni foams were observed using SEM analysis. The Co- Ni-P-B/Ni foam catalyst showed the superior performance on hydrogen generation rate due to the uniform formation of catalyst particles on the surface of Ni foam. Characteristics of hydrogen generation rate on the Co-N-P-B/Ni foam catalyst were investigated at the variety of NaBH4 and NaOH concentrations. The hydrogen generation rate increased with decreasing NaBH4 concentration, while increasing NaOH concentration. Durability test was performed, resulting in the stable hydrogen generation for 6 hours.

  2. Study of the interfacial magnetism in NiO/NiFe system

    Energy Technology Data Exchange (ETDEWEB)

    Tafur, Miguel, E-mail: umiguelt@cbpf.b [Centro Brasileiro de Pesquisas Fisicas, Rua Dr. Xavier Sigaud 150 - Urca - Rio de Janeiro - 22290-180 RJ (Brazil); Alayo, W. [Centro Brasileiro de Pesquisas Fisicas, Rua Dr. Xavier Sigaud 150 - Urca - Rio de Janeiro - 22290-180 RJ (Brazil); Nascimento, V.P. [Universidade Federal do Espirito Santo, Centro Universitario Norte do Espirito Santo, Rua Humberto de Almeida Francklin 257 - Bairro Universitario, Sao Mateus - 29933-415 ES (Brazil); Xing, Y.T.; Baggio-Saitovitch, E. [Centro Brasileiro de Pesquisas Fisicas, Rua Dr. Xavier Sigaud 150 - Urca - Rio de Janeiro - 22290-180 RJ (Brazil)

    2010-05-31

    The interfacial magnetism of NiO/NiFe bilayers with different NiFe layer thicknesses, produced by DC and RF magnetron sputtering, has been studied by magnetometry and X-ray magnetic circular dichroism (XMCD). In magnetic hysteresis loops, the exchange bias field was found to be inversely proportional to the NiFe layer thickness. The fit using the Meiklejohn and Bean model gives a coupling energy at the NiO/NiFe interface of approximately 0.027 mJ/m{sup 2}. The analysis of the XMCD spectra of Fe and Ni, using the sum rules, shows a reduction of the effective spin magnetic moments in bilayers with NiFe thickness less than 4 nm. This reduction is attributed to hybridization of ferromagnetic and antiferromagnetic atoms d orbitals near the interface and/or formation of antiferromagnetic alloys due to atomic diffusion at the interfaces.

  3. Composite Ni/NiO-Cr2O3 Catalyst for Alkaline Hydrogen Evolution Reaction

    Energy Technology Data Exchange (ETDEWEB)

    Bates, MK; Jia, QY; Ramaswamy, N; Allen, RJ; Mukerjee, S

    2015-03-12

    We report a Ni-Cr/C electrocatalyst with unpreeedented massactivity for the hydrogen evolution reaction (HER). in alkaline electrolyte. The HER Oietics of numerous binary and ternary Ni-alloys and composite Ni/metal-euride/C samples were evaluated in aquebus 0.1 M KOH electrolyte. The highest HER mass-activity was observed for Ni-Cr materials which exhibit metallic Ni as well as NiOx and Cr2O3 phases as determined by X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS) analysis. The onset of the HER is significantly improved compared to munerous binary dor ternary Ni-alloys, inCluding Ni Mg materials. It is likely that at adjacent Ni/NiOx sites, the oxide acts as a sink for OHads, while the metallic Ni acts as a, sink for the H-ads, intermediate of the HER, thus minimizing the high activation energy of hydrogen evolution via water reduction. This is confirmed by in situ XAS studies that show that the synergistic HER enhancement is due to NiO content and that the Cr2O3 appears to stabilize the composite NiO component-under HER conditions (where NiOx would typically be reduced to metallic Ni-0). Furthermore, in contrast to Pt, the Ni(O-x)/Cr2O3 catalyst appears resistant to poisoning by the anion.exchange ionomer (AEI), a serloua consideration when applied to an anionic polymer electrolyte interface. Furthermore, we report a: detailed model of the double layer interface which helps explain the observed ensemble effect in the presence of AEI.

  4. Determination of isothermal sections of the Co-Nb-Ni and Ni-Mo-Re ternary systems

    Institute of Scientific and Technical Information of China (English)

    FENG Yan; WANG Richu; YU Kun; WEN Danhua

    2008-01-01

    The isothermal sections of the Co-Nb-Ni ternary system at 1373 K and the Ni-Mo-Re ternary system at 1473 K were determined by means of diffusion triple and electron probe microanalysis (EPMA).The results indicate that there are three three-phase regions found in the Co-Nb-Ni ternary system at 1373 K:(Ni,Co)+NbCo3+ Ni3Nb,NbCo3+NbCo2+Ni3Nb,and NbCo2+μ+Ni3Nb;and four three-phase regions found in the Ni-Mo-Re ternary system at 1473 K:Re+Ni+χ,Ni+NiMo+σ,σ+χ+ Ni,and σ+Mo+NiMo.No ternary eompoond is observed in the two isothermal sections.The isothermal sections arc contrasted with the previous study.

  5. Ni clay neoformation on montmorillonite surface.

    Science.gov (United States)

    Dähn, R; Scheidegger, A; Manceau, A; Schlegel, M; Baeyens, B; Bradbury, M H

    2001-03-01

    Polarized extended X-ray absorption fine structure spectroscopy (P-EXAFS) was used to study the sorption mechanism of Ni on the aluminous hydrous silicate montmorillonite at high ionic strength (0.3 M NaClO4), pH 8 and a Ni concentration of 0.66 mM. Highly textured self-supporting clay films were obtained by slowly filtrating a clay suspension after a reaction time of 14 days. P-EXAFS results indicate that sorbed Ni has a Ni clay-like structural environment with the same crystallographic orientation as montmorillonite layers.

  6. The Ni-Al-Hf Multiphase Diffusion

    Directory of Open Access Journals (Sweden)

    Romanowska J.

    2016-06-01

    Full Text Available The generalized Darken method was applied to simulate the diffusion between γ-Ni| γ’-Ni3Al and γ’-Ni3Al|β-NiAl interfaces. The results of calculations were compared with the experimental concentration’s profiles of nickel, aluminum and hafnium in aluminide and hafnium doped aluminide coatings deposited by the CVD and PVD methods on pure nickel. The method deals with the Wagner’s integral diffusion coefficients and thermodynamic data - activities of components. The experimental results agree with the simulated ones.

  7. 酸度对化学镀Ni-P和Ni-Mo-P的影响%Effect of acidity on Ni-P and Ni-Mo-P chemical plating

    Institute of Scientific and Technical Information of China (English)

    方永奎; 邱安娥; 张翼; 邱万忠

    2002-01-01

    研究了镀液pH值对Ni-P和Ni-Mo-P化学镀镀层的生成速度和镀层中Ni质量分数的影响. 结果表明,镀液的pH值不仅影响Ni的沉积速度,而且影响镀层中Ni的质量分数;镀层生成速度均随镀液pH值增大而出现极大值,但两者的位置有所不同;随镀液pH值增加,Ni-Mo-P镀镀层中w(Ni)出现极大值,而Ni-P镀则是pH值增至一定值后w(Ni)趋于平稳;镀层的生成速度与镀层中w(Ni)的最高点都出现在相同的酸度下,Ni-P镀镀液的最佳pH值为5.5,而Ni-Mo-P镀镀液的最佳pH值为6.5.

  8. OPTIMIZATION OF Ni BIOACCUMULATION BY SYNECHCOCCUS

    Institute of Scientific and Technical Information of China (English)

    Haoran Li; Zhuwei Du; Jianglong Liang; Huiqing Bai; Yali Feng

    2006-01-01

    Influencing factors on bioaccumulation of Ni by Synechcoccus were studied in this paper. The equilibration time of Ni bioaccumulation was about 80 min in aqueous solution. Bioaccumulation quantity reached maximum when mass ratio of Ni to dry weight concentration of Synechcoccus was 16-18%. Bioaccumulation quantity increased with increasing pH. The optimum pH was 9-10 and higher pH led to precipitation of Ni(OH)2. Bioaccumulation quantity was also influenced by temperature and light intensity reaching their optima at 35℃ and 3 000 Ix respectively. Bioaccumulation of nonliving algae was larger than that of living algae.

  9. Morphology controlled synthesis of 2-D Ni-Ni3S2 and Ni3S2 nanostructures on Ni foam towards oxygen evolution reaction

    Science.gov (United States)

    Chaudhari, Nitin Kaduba; Oh, Aram; Sa, Young Jin; Jin, Haneul; Baik, Hionsuck; Kim, Sang Gu; Lee, Suk Joong; Joo, Sang Hoon; Lee, Kwangyeol

    2017-03-01

    Catalysts for oxygen evolution reactions (OER) are at the heart of key renewable energy technologies, and development of non-precious metal catalysts with high activity and stability remain a great challenge in this field. Among various material candidates, metal sulfides are receiving increasing attention. While morphology-dependent catalytic performances are well established in noble metal-based catalysts, relatively little is known for the morphology‒catalytic performance relationship in metal sulfide catalysts. In this study, uniform spider web-like Ni nanosheets-Ni3S2 and honeycomb-like Ni3S2 structures are deposited on nickel foam (Ni3S2/NF) by a facile one-step hydrothermal synthetic route. When used as an oxygen evolution electrode, the spider web-like Ni-Ni3S2/NF with the large exposed surface area shown excellent catalytic activity and stability with an overpotential of 310 mV to achieve at 10 mA/cm2 and a Tafel slope of 63 mV/dec in alkaline media, which is superior to the honeycomb-like structure without Ni nanosheet. The low Tafel slope of the spider web-like Ni-Ni3S2/NF represents one of the best OER kinetics among nickel sulfide-based OER catalysts. The results point to the fact that performance of the metal sulfide electrocatalysts might be fine-tuned and optimized with morphological controls.

  10. Effects of Ni vacancy, Ni antisite, Cr and Pt on the third-order elastic constants and mechanical properties of NiAl

    KAUST Repository

    Wu, Shaohua

    2014-12-01

    Effects of Ni vacancy, Ni antisite in Al sublattice, Cr in Al sublattice, Pt in Ni sublattice on the second-order elastic constants (SOECs) and third-order elastic constants (TOECs) of the B2 NiAl have been investigated using the first-principles methods. Lattice constant and the SOECs of NiAl are in good agreement with the previous results. The brittle/ductile transition map based on Pugh ratio G/B and Cauchy pressure Pc shows that Ni antisite, Cr, Pt and pressure can improve the ductility of NiAl, respectively. Ni vacancy and lower pressure can enhance the Vickers hardness Hv of NiAl. The density of states (DOS) and the charge density difference are also used to analysis the effects of vacancy, Ni antisite, Cr and Pt on the mechanical properties of NiAl, and the results are in consistent with the transition map. © 2014 Elsevier Ltd. All rights reserved.

  11. First principles exploration of NiO and its ions NiO+ and NiO-.

    Science.gov (United States)

    Sakellaris, Constantine N; Mavridis, Aristides

    2013-02-07

    We present a high level ab initio study of NiO and its ions, NiO(+) and NiO(-). Employing variational multireference configuration interaction (MRCI) and single reference coupled-cluster methods combined with basis sets of quintuple quality, 54, 20, and 10 bound states of NiO, NiO(+), and NiO(-) have been studied. For all these states, complete potential energy curves have been constructed at the MRCI level of theory; in addition, for the ground states of the three species core subvalence (3s(2)3p(6)∕(Ni)) and scalar relativistic effects have been taken into account. We report energetics, spectroscopic parameters, dipole moments, and spin-orbit coupling constants. The agreement with experiment is in the case of NiO good, but certain discrepancies that need further investigation have arisen in the case of the anion whose ground state remains computationally a tantalizing matter. The cation is experimentally almost entirely unexplored, therefore, the study of many states shall prove valuable to further investigators. The ground state symmetry, bond distances, and binding energies of NiO and NiO(+) are (existing experimental values in parenthesis), X(3)Σ(-)(X(3)Σ(-)), r(e) = 1.606 (1.62712) Å, D(0) = 88.5 (89.2 ± 0.7) kcal/mol, and X(4)Σ(-)(?), r(e) = 1.60(?) Å, D(0) = 55 (62.4 ± 2.4) kcal/mol, respectively. The ground state of NiO(-) is (4)Σ(-) (but (2)Π experimentally) with D(0) = 85-87 (89.2 ± 0.7) kcal/mol.

  12. Effect of air annealing on structural and magnetic properties of Ni/NiO nanoparticles

    Science.gov (United States)

    Nadeem, K.; Ullah, Asmat; Mushtaq, M.; Kamran, M.; Hussain, S. S.; Mumtaz, M.

    2016-11-01

    We reported systematic study on structural and magnetic properties of nickel/nickel oxide (Ni/NiO) nanoparticles annealed under air atmosphere at different temperatures in the range 400-800 °C. The XRD spectra revealed two phases such as Ni and NiO. The average crystallite size increases with increasing annealing temperature. A phase diagram was developed between two phases versus annealing temperature using XRD analysis. At lower annealing temperatures, Ni phase is dominant which does not easily undergo oxidation to form NiO. The NiO phase increases with increasing annealing temperature. FTIR spectroscopy revealed an increase in the NiO phase content at higher annealing temperature, which is in agreement with the XRD analysis. SEM images showed that nanoparticles are well separated at lower annealing temperatures but get agglomerated at higher annealing temperatures. The ferromagnetic (FM) Ni phase content and saturation magnetization (Ms) showed nearly the same trend with increasing annealing temperature. The nanoparticles annealed at 500 °C and 800 °C revealed highest and lowest Ms values, respectively, which is in accordance with the XRD phase diagram. Coercivity showed an overall decreasing trend with increasing annealing temperature due to decreased concentration of FM Ni phase and increasing average crystallite size. All these measurements indicate that the structural and magnetic properties of Ni/NiO nanoparticles are strongly influenced by the annealing temperature.

  13. Magnetic anisotropy studies on pulsed electrodeposited Ni/Ag/Ni trilayer

    Energy Technology Data Exchange (ETDEWEB)

    Dhanapal, K.; Revathy, T.A.; Raj, M. Anand [Materials Science Centre, Department of Nuclear Physics, University of Madras, Guindy Campus, Chennai 600 025 (India); Narayanan, V. [Department of Inorganic Chemistry, University of Madras, Guindy Campus, Chennai 600 025 (India); Stephen, A., E-mail: stephen_arum@hotmail.com [Materials Science Centre, Department of Nuclear Physics, University of Madras, Guindy Campus, Chennai 600 025 (India)

    2014-09-15

    Highlights: • Ni/Ag/Ni layered film has been prepared using pulsed electrodeposition method. • Crystalline nature of layered films is confirmed using XRD. • Magnetic easy axis is observed to be parallel to the plane of the film. • Magnetic anisotropy change is dependent on number of layers. • Ni/Ag/Ni layered film shows higher anisotropy energy than pure Ni film. - Abstract: The pulsed electrodeposition method was employed for the deposition of pure Ni, Ni/Ag and Ni/Ag/Ni films due to its greater advantages while comparing with other methods. The X-ray diffraction pattern confirms the formation of fcc structure for both nickel and silver. The cross sectional scanning electron microscopy shows the layer formation in Ni/Ag and Ni/Ag/Ni films. The metallic nature of the nickel and silver were also confirmed using X-ray photoelectron spectroscopy. The magnetic anisotropy behaviour was studied using vibrating sample magnetometer which gives that the easy axis is in plan of the film for all the film.

  14. Porous NiTi shape memory alloys produced by SHS: microstructure and biocompatibility in comparison with Ti2Ni and TiNi3.

    Science.gov (United States)

    Bassani, Paola; Panseri, Silvia; Ruffini, Andrea; Montesi, Monica; Ghetti, Martina; Zanotti, Claudio; Tampieri, Anna; Tuissi, Ausonio

    2014-10-01

    Shape memory alloys based on NiTi have found their main applications in manufacturing of new biomedical devices mainly in surgery tools, stents and orthopedics. Porous NiTi can exhibit an engineering elastic modulus comparable to that of cortical bone (12-17 GPa). This condition, combined with proper pore size, allows good osteointegration. Open cells porous NiTi was produced by self propagating high temperature synthesis (SHS), starting from Ni and Ti mixed powders. The main NiTi phase is formed during SHS together with other Ni-Ti compounds. The biocompatibility of such material was investigated by single culture experiment and ionic release on small specimen. In particular, NiTi and porous NiTi were evaluated together with elemental Ti and Ni reference metals and the two intermetallic TiNi3, Ti2Ni phases. This approach permitted to clearly identify the influence of secondary phases in porous NiTi materials and relation with Ni-ion release. The results indicated, apart the well-known high toxicity of Ni, also toxicity of TiNi3, whilst phases with higher Ti content showed high biocompatibility. A slightly reduced biocompatibility of porous NiTi was ascribed to combined effect of TiNi3 presence and topography that requires higher effort for the cells to adapt to the surface.

  15. Structure-activity relations for Ni-containing zeolites during NO reduction II. Role of the chemical state of Ni

    NARCIS (Netherlands)

    Mosqueda-Jiménez, B.I.; Jentys, A.; Seshan, K.; Lercher, J.A.

    2003-01-01

    The influence of the metal in Ni-containing zeolites used as catalysts for the reduction of NO with propane and propene was studied. In the fresh catalysts, Ni is located in ion exchange positions for Ni/MOR, Ni/ZSM-5, and Ni/MCM-22. The formation of carbonaceous deposits, the removal of Al from fra

  16. Characterization of Electrodeposited Nanoporous Ni and NiCu Films

    Science.gov (United States)

    Koboski, Kyla; Hampton, Jennifer

    2013-03-01

    Nanoporous thin films are interesting candidates to catalyze certain reactions because of their large surface areas. This project focuses on the deposition of Ni and NiCu thin films on a Au substrate and further explores the catalysis of the hydrogen evolution reaction (HER). Depositions are created using controlled potential electrolysis. Samples are then dealloyed using linear sweep voltammetry. Before and after the dealloying, all the samples are characterized using multiple techniques. Electrochemical capacitance measurements allow comparisons of sample roughness. HER measurements characterize the reactivity of the sample with respect to the specific catalytic reaction. The Tafel equation is fit to the data to obtain information about the kinetics of the HER of the samples. Other methods for characterizing the samples include scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The use of SEM allows images to be taken of the deposition to determine the change in the structure pre- and post- dealloy of the sample. EDS allows the elemental composition of the deposition to be determined before and after the dealloy stage. This material is based upon work supported by the National Science Foundation under RUI Grant DMR-1104725, MRI Grant CHE-1126462, MRI Grant CHE-0959282, and ARI grant PHY-0963317.

  17. Spin polarization effect of Ni2 molecule

    Institute of Scientific and Technical Information of China (English)

    Yan Shi-Ying; Zhu Zheng-He

    2008-01-01

    The density functional theory (DFT) method (b3p86) of Gaussian 03 is used to optimize the structure of the Ni2 molecule. The result shows that the ground state for the Ni2 molecule is a 5-multiple state, symbolizing a spin polarization effect existing in the Ni2 molecule, a transition metal molecule, but no spin pollution is found because the wavefunction of the ground state does not mingle with wavefunctions of higher-energy states. So the ground state for Ni2 molecule, which is a 5-multiple state, is indicative of spin polarization effect of the Ni2 molecule, that is, there exist 4 parallel spin electrons in Ni2 molecule. The number of non-conjugated electrons is greatest. These electrons occupy different spatial orbitals so that the energy of the Ni2 molecule is minimized. It can be concluded that the effect of parallel spin in the Ni2 molecule is larger than that of the conjugated molecule, which is obviously related to the effect of electron d delocalization. In addition, the Murrell-Sorbie potential functions with the parameters of the ground state and other states of the Ni2 molecule are derived. The dissociation energy De for the ground state of the Ni2 molecule is 1.835 eV, equilibrium bond length Re is 0.2243 nm, vibration frequency ωe is 262.35 cm-1. Its force constants f2, f3 and f4 are 1.1901 aJ.nm-2, 5.8723 aJ.nm-3, and 21.2505 aJ.nm-4 respectively. The other spectroscopic data for the ground state of the Ni2 molecule ωexe, Be and αe are 1.6315cm-1, 0.1141 cm-1, and 8.0145×10-4 cm-1 respectively.

  18. Angle-resolved XPS Studies of Magnetic Multilayers Ta/NiO/NiFe/Ta%磁性多层膜Ta/NiO/NiFe/Ta角分辨XPS

    Institute of Scientific and Technical Information of China (English)

    于广华; 朱逢吾; 马纪东; 王安荣

    2002-01-01

    磁性多层膜Ta/NiO/NiFe/Ta由磁控溅射方法制备.采用角分辨X射线光电子能谱(XPS)研究了反铁磁(NiO)/铁磁(NiFe)界面.结果表明,在NiO/NiFe界面发生了化学反应: NiO+Fe = Ni+FeO和3NiO+2Fe =3Ni+Fe2O3,此反应深度约为1~1.5 nm.反应产物将影响NiO对NiFe的交换耦合.

  19. Models of the Ni-L and Ni-SIa States of the [NiFe]-Hydrogenase Active Site.

    Science.gov (United States)

    Chambers, Geoffrey M; Huynh, Mioy T; Li, Yulong; Hammes-Schiffer, Sharon; Rauchfuss, Thomas B; Reijerse, Edward; Lubitz, Wolfgang

    2016-01-19

    A new class of synthetic models for the active site of [NiFe]-hydrogenases are described. The Ni(I/II)(SCys)2 and Fe(II)(CN)2CO sites are represented with (RC5H4)Ni(I/II) and Fe(II)(diphos)(CO) modules, where diphos = 1,2-C2H4(PPh2)2(dppe) or cis-1,2-C2H2(PPh2)2(dppv). The two bridging thiolate ligands are represented by CH2(CH2S)2(2-) (pdt(2-)), Me2C(CH2S)2(2-) (Me2pdt(2-)), and (C6H5S)2(2-). The reaction of Fe(pdt)(CO)2(dppe) and [(C5H5)3Ni2]BF4 affords [(C5H5)Ni(pdt)Fe(dppe)(CO)]BF4 ([1a]BF4). Monocarbonyl [1a]BF4 features an S = 0 Ni(II)Fe(II) center with five-coordinated iron, as proposed for the Ni-SIa state of the enzyme. One-electron reduction of [1a](+) affords the S = 1/2 derivative [1a](0), which, according to density functional theory (DFT) calculations and electron paramagnetic resonance and Mössbauer spectroscopies, is best described as a Ni(I)Fe(II) compound. The Ni(I)Fe(II) assignment matches that for the Ni-L state in [NiFe]-hydrogenase, unlike recently reported Ni(II)Fe(I)-based models. Compound [1a](0) reacts with strong acids to liberate 0.5 equiv of H2 and regenerate [1a](+), indicating that H2 evolution is catalyzed by [1a](0). DFT calculations were used to investigate the pathway for H2 evolution and revealed that the mechanism can proceed through two isomers of [1a](0) that differ in the stereochemistry of the Fe(dppe)CO center. Calculations suggest that protonation of [1a](0) (both isomers) affords Ni(III)-H-Fe(II) intermediates, which represent mimics of the Ni-C state of the enzyme.

  20. Oxidation kinetics of Ni metallic films: Formation of NiO-based resistive switching structures

    Energy Technology Data Exchange (ETDEWEB)

    Courtade, L.; Turquat, Ch. [L2MP, Laboratoire Materiaux et Microelectronique de Provence, UMR CNRS 6137, Universite du Sud Toulon Var, BP 20132, F-83957 La Garde Cedex (France); Muller, Ch. [L2MP, Laboratoire Materiaux et Microelectronique de Provence, UMR CNRS 6137, Universite du Sud Toulon Var, BP 20132, F-83957 La Garde Cedex (France)], E-mail: christophe.muller@l2mp.fr; Lisoni, J.G.; Goux, L.; Wouters, D.J. [IMEC, Interuniversity MicroElectronics Center, Kapeldreef 75, B-3001 Leuven (Belgium); Goguenheim, D. [L2MP, Laboratoire Materiaux et Microelectronique de Provence, UMR CNRS 6137, ISEN-Toulon, Maison des Technologies, Place Georges Pompidou, F-83000 Toulon (France); Roussel, P. [UCCS, Unite de Catalyse et Chimie du Solide, UMR CNRS 8181, ENSCL, BP 90108, F-59652 Villeneuve d' Ascq (France); Ortega, L. [Laboratoire de Cristallographie, UPR CNRS 5031, BP 166, F-38042 Grenoble Cedex 9 (France)

    2008-04-30

    Resistive switching controlled by external voltage has been reported in many Metal/Resistive oxide/Metal (MRM) structures in which the resistive oxide was simple transition metal oxide thin films such as NiO or TiO{sub 2} deposited by reactive sputtering. In this paper, we have explored the possibility to form NiO-based MRM structures from the partial oxidation of a blanket Ni metallic film using a Rapid Thermal Annealing route, the remaining Ni layer being used as bottom electrode. X-ray diffraction was used to apprehend the Ni oxidation kinetics while transmission electron microscopy enabled investigating local microstructure and film interfaces. These analyses have especially emphasized the predominant role of the as-deposited Ni metallic film microstructure (size and orientation of crystallites) on (i) oxidation kinetics, (ii) NiO film microstructural characteristics (crystallite size, texture and interface roughness) and (iii) subsequent electrical behavior. On this latter point, the as-grown NiO films were initially in the low resistance ON state without the electro-forming step usually required for sputtered films. Above the threshold voltage varying from 2 to 5 V depending on oxidation conditions, the Pt/NiO/Ni MRM structures irreversibly switched into the high resistance OFF state. This irreversibility is thought to originate in the microstructure of the NiO films that would cause the difficulty to re-form conductive paths.

  1. Purification of a Ni sup 2+ -binding protein, pNiXa, from Xenopus ovary

    Energy Technology Data Exchange (ETDEWEB)

    Beck, B.L.; Makowski, G.S.; Nomoto, S.; Sunderman, F.W. (Univ. of Connecticut, Farmington (United States))

    1991-03-11

    Previous research on nickel-induced teratogenesis in Xenopus laevis identified several Ni{sup 2+}-binding proteins, including pNiXa in Xenopus ovaries, unfertilized eggs, and embryos. A major goal of this research project is elucidating the role of pNiXa in the uptake, embryotoxicity, and teratogenicity of Ni{sup 2+} in Xenopus. To purify and identify pNiXa, ovarian tissue from mature Xenopus females was homogenized in 3 vol of Tris buffer and centrifuged. The supernatant was centrifuged; the ultracentrifugal supernatant was batch-adsorbed onto DEAE-cellulose. The pNiSa remained unbound and was subsequently adsorbed on phosphocellulose and eluted by a step-wise NaCl gradient. The pNiXa was eluted in 0.25 M NaCl; this fraction was concentrated, and further purified by reverse phase chromatography on a 5 {mu}m C-8 column, with a linear trifluoroacetic acid/acetonitrile gradient. The pNiXa was eluted at {approximately}56% acetonitrile, yielding a single protein band with mol wt {approximately}47 kD,based on SDS-PAGE analysis. Comparison of the amino acid composition of pNiXa versus the results obtained by automated Edman degradation indicated that the N-terminus of pNiXa was blocked. Sequencing of peptide fragments of pNiXa is underway.

  2. Formation of dioxins on NiO and NiCl2 at different oxygen concentrations.

    Science.gov (United States)

    Yang, Jie; Yan, Mi; Li, Xiaodong; Lu, Shengyong; Chen, Tong; Yan, Jianhua; Olie, Kees; Buekens, Alfons

    2015-08-01

    Model fly ash (MFA) containing activated carbon (AC) as source of carbon, NaCl as source of chlorine and either NiO or NiCl2 as de novo catalyst, was heated for 1h at 350 °C in a carrier gas flow composed of N2 containing 0, 6, 10, and 21 vol.% O2, to study the formation of PCDD/Fs (dioxins) and its dependence on oxygen. The formation of PCDD/Fs with NiCl2 was stronger by about two orders of magnitude than with NiO and the difference augmented with rising oxygen concentration. The thermodynamics of the NiO-NiCl2 system were represented, X-ray absorption near edge structural (XANES) spectroscopy allowed to probe the state of oxidation of the nickel catalyst in the MFA and individual metal species were distinguished using the LCF (Linear combination fitting) technique: thus three supplemental nickel compounds (Ni2O3, Ni(OH)2, and Ni) were found in the fly ash. Principal Component Analysis (PCA) indicates that both Ni2O3 and NiCl2 probably played an important role in the formation of PCDD/Fs.

  3. Abrasive wear property of laser melting/deposited Ti2Ni/TiNi intermetallic alloy

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A wear resistant intermetallic alloy consisting of TiNi primary dendrites and Ti2Ni matrix was fabricated by the laser melting deposition manufacturing process. Wear resistance of Ti2Ni/TiNi alloy was evaluated on an abrasive wear tester at room temperature under the different loads. The results show that the intermetallic alloy suffers more abrasive wear attack under low wear test load of 7, 13 and 25 N than high-chromium cast-iron. However, the intermetallic alloy exhibits better wear resistance under wear test load of 49 N. Abrasive wear of the laser melting deposition Ti2Ni/TiNi alloy is governed by micro-cutting and plowing.Pseudoelasticity of TiNi plays an active role in contributing to abrasive wear resistance.

  4. Preparation of ZnNiMo/{gamma}-alumina catalysts from recycled Ni for hydrotreating reactions

    Energy Technology Data Exchange (ETDEWEB)

    Linares, Carlos F.; Lopez, Julio [Laboratorio de Catalisis y Metales de Transicion, Facultad de Ciencias y Tecnologia, Departamento de Quimica, Universidad de Carabobo, Valencia Edo Carabobo, Apartado Postal 3336 (Venezuela); Scaffidi, Adriana; Scott, Carlos E. [Centro de Catalisis, Petroleo y Petroquimica, Universidad Central de Venezuela, Facultad de Ciencias, Apartado 47102, Los Chaguaramos, Caracas (Venezuela)

    2005-09-18

    Ni, recovered from Ni-Cd cellular phone batteries, was used in the preparation of ZnNiMo/Al{sub 2}O{sub 3} catalysts. The catalysts were characterized by temperature programmed reductions (TPR), surface area determinations (BET) and chemical analysis. Vanadyl octaethyl porphyrin (VOOEP) hydrodeporphyrinization (HDP) and thiophene hydrodesulfurization (HDS) were used as catalytic tests. It was found that the addition of Zn increases the ratio between octahedral and tetrahedral Mo in ZnMo and ZnNiMo catalysts, and that Ni addition lowers the reduction temperature of Mo species. Both results induce a positive synergetic effect for HDP and HDS reactions. An activity maximum was found for the catalyst with a Zn/(Zn+Ni) atomic ratio equal to 0.29, for both reactions. Finally, the use of a possible pollutant (Ni-Cd batteries) to produce a catalyst to eliminate contaminants in fuels was shown to be feasible.

  5. Predictability of the Ningaloo Niño/Niña.

    Science.gov (United States)

    Doi, Takeshi; Behera, Swadhin K; Yamagata, Toshio

    2013-10-08

    The seasonal prediction of the coastal oceanic warm event off West Australia, recently named the Ningaloo Niño, is explored by use of a state-of-the-art ocean-atmosphere coupled general circulation model. The Ningaloo Niño/Niña, which generally matures in austral summer, is found to be predictable two seasons ahead. In particular, the unprecedented extreme warm event in February 2011 was successfully predicted 9 months in advance. The successful prediction of the Ningaloo Niño is mainly due to the high prediction skill of La Niña in the Pacific. However, the model deficiency to underestimate its early evolution and peak amplitude needs to be improved. Since the Ningaloo Niño/Niña has potential impacts on regional societies and industries through extreme events, the present success of its prediction may encourage development of its early warning system.

  6. Preparation and Properties of Amorphous NiFe/Cu/NiFe Thin Films

    Institute of Scientific and Technical Information of China (English)

    YE Yun; JIANG Ya-dong; HU Wen-cheng; ZENG Hong-juan

    2004-01-01

    The amorphous of Permalloy on the copper subtract was studied using composite electroplating method. A portion of hydrogen brings the counteraction on the surface of cathode leading nickel-iron alloys to be anomalous in the process of co-depositing. The results of X-ray diffraction (XRD) show that the Ni-Fe alloys layer is amorphous. The Giant Magneto -Impedance (GMI) effect of Ni-Fe alloys was obtained under the optimal conditions, dependence on the soft magnetic property of Ni-Fe amorphous thin film. As a result, the ratios△ Z/Z of NiFe/Cu/NiFe amorphous thin film are 30% at 40 kHz which is in low frequency. Furthermore, the GMI value of NiFe/Cu/NiFe amorphous thin film with a sandwich structure is higher than that of single-layer ferromagnetic films of the same thickness.

  7. Nanoscale structural heterogeneity in Ni-rich half-Heusler TiNiSn

    Energy Technology Data Exchange (ETDEWEB)

    Douglas, Jason E., E-mail: jedouglas@mrl.ucsb.edu; Pollock, Tresa M. [Materials Department, University of California, Santa Barbara, California 93106 (United States); Materials Research Laboratory, University of California, Santa Barbara, California 93106 (United States); Chater, Philip A. [Diamond Light Source, Chilton, Oxfordshire OX11 0DE (United Kingdom); Brown, Craig M. [Center for Neutron Research, National Institute of Standards and Technology, Gaithersburg, Maryland 20899 (United States); Department of Chemical Engineering, University of Delaware, Newark, Delaware 19716 (United States); Seshadri, Ram [Materials Department, University of California, Santa Barbara, California 93106 (United States); Materials Research Laboratory, University of California, Santa Barbara, California 93106 (United States); Department of Chemistry and Biochemistry, University of California, Santa Barbara, California 93106 (United States)

    2014-10-28

    The structural implications of excess Ni in the TiNiSn half-Heusler compound are examined through a combination of synchrotron x-ray and neutron scattering studies, in conjunction with first principles density functional theory calculations on supercells. Despite the phase diagram suggesting that TiNiSn is a line compound with no solid solution, for small x in TiNi{sub 1+x}Sn there is indeed an appearance—from careful analysis of the scattering—of some solubility, with the excess Ni occupying the interstitial tetrahedral site in the half-Heusler structure. The analysis performed here would point to the excess Ni not being statistically distributed, but rather occurring as coherent nanoclusters. First principles calculations of energetics, carried out using supercells, support a scenario of Ni interstitials clustering, rather than a statistical distribution.

  8. Thermodynamic Analysis of Electrodeposited Ni-Mo and Ni-Mo-P Alloys

    Institute of Scientific and Technical Information of China (English)

    GUO Zhong-cheng; XU Rui-dong; WANG Ji-kun

    2004-01-01

    The potential-pH diagram of Ni-P-H2O system is calculated and constructed by use of thermodynamic data. On the basis of the potential-pH diagram the electrochemical behaviors of electrodepositing Ni-Mo and Ni-Mo-P alloys are analyzed. The phases of Ni-Mo and Ni-Mo-P coatings are identified by means of X-ray diffraction analysis. The thermodynamic analysis shows that it is difficult to deposit Mo or P individually from its aqueous solution, and they must be co-deposited with other metals by induced deposition; P and Ni can be deposited as compound Ni3P on the cathode; Mo is deposited in two forms: one is in the form of MoO3 solid particles and the other is in the form of compound MoC. X-ray diffraction analysis is in agreement with the thermodynamic analysis.

  9. Charge ordering in Ni1 +/Ni2 + nickelates: La4Ni3O8 and La3Ni2O6

    Science.gov (United States)

    Botana, Antia S.; Pardo, Victor; Pickett, Warren E.; Norman, Michael R.

    2016-08-01

    Ab initio calculations allow us to establish a close connection between the Ruddlesden-Popper layered nickelates and cuprates not only in terms of filling of d levels (close to d9) but also because they show Ni1 +(S =1 /2 ) /Ni2 +(S =0 ) stripe ordering. The insulating charge-ordered ground state is obtained from a combination of structural distortions and magnetic order. The Ni2 + ions are in a low-spin configuration (S =0 ) yielding an antiferromagnetic arrangement of Ni1 + S =1 /2 ions like the long-sought spin-1/2 antiferromagnetic insulator analog of the cuprate parent materials. The analogy extends further with the main contribution to the bands near the Fermi energy coming from hybridized Ni dx2-y2 and O p states.

  10. NiAl alloys for structural uses

    Science.gov (United States)

    Koss, D. A.

    1991-01-01

    Alloys based on the intermetallic compound NiAl are of technological interest as high temperature structural alloys. These alloys possess a relatively low density, high melting temperature, good thermal conductivity, and (usually) good oxidation resistance. However, NiAl and NiAl-base alloys suffer from poor fracture resistance at low temperatures as well as inadequate creep strength at elevated temperatures. This research program explored macroalloying additions to NiAl-base alloys in order to identify possible alloying and processing routes which promote both low temperature fracture toughness and high temperature strength. Initial results from the study examined the additions of Fe, Co, and Hf on the microstructure, deformation, and fracture resistance of NiAl-based alloys. Of significance were the observations that the presence of the gamma-prime phase, based on Ni3Al, could enhance the fracture resistance if the gamma-prime were present as a continuous grain boundary film or 'necklace'; and the Ni-35Al-20Fe alloy was ductile in ribbon form despite a microstructure consisting solely of the B2 beta phase based on NiAl. The ductility inherent in the Ni-35Al-20Fe alloy was explored further in subsequent studies. Those results confirm the presence of ductility in the Ni-35Al-20Fe alloy after rapid cooling from 750 - 1000 C. However exposure at 550 C caused embrittlement; this was associated with an age-hardening reaction caused by the formation of Fe-rich precipitates. In contrast, to the Ni-35Al-20Fe alloy, exploratory research indicated that compositions in the range of Ni-35Al-12Fe retain the ordered B2 structure of NiAl, are ductile, and do not age-harden or embrittle after thermal exposure. Thus, our recent efforts have focused on the behavior of the Ni-35Al-12Fe alloy. A second parallel effort initiated in this program was to use an alternate processing technique, mechanical alloying, to improve the properties of NiAl-alloys. Mechanical alloying in the

  11. One-neutron knockout from $^{57}$Ni

    CERN Document Server

    Yurkewicz, K L; Brown, B A; Enders, J; Gade, A; Glasmacher, T; Hansen, P G; Maddalena, V; Navin, A; Sherrill, B M; Tostevin, J A

    2006-01-01

    The single-particle structure of $^{57}$Ni and level structure of $^{56}$Ni were investigated with the \\mbox{$^{9}$Be ($^{57} $Ni,$^{56}$Ni+$\\gamma$)$\\it{X}$} reaction at 73 MeV/nucleon. An inclusive cross section of 41.4(12)~mb was obtained for the reaction, compared to a theoretical prediction of 85.4 mb, hence only 48(2)% of the theoretical cross section is exhausted. This reduction in the observed spectroscopic strength is consistent with that found for lighter well-bound nuclei. One-neutron removal spectroscopic factors of 0.58(11) to the ground state and 3.7(2) to all excited states of $^{56}$Ni were deduced.

  12. Tensile deformation of NiTi wires.

    Science.gov (United States)

    Gall, Ken; Tyber, Jeff; Brice, Valerie; Frick, Carl P; Maier, Hans J; Morgan, Neil

    2005-12-15

    We examine the structure and properties of cold drawn Ti-50.1 at % Ni and Ti-50.9 at % Ni shape memory alloy wires. Wires with both compositions possess a strong fiber texture in the wire drawing direction, a grain size on the order of micrometers, and a high dislocation density. The more Ni rich wires contain fine second phase precipitates, while the wires with lower Ni content are relatively free of precipitates. The wire stress-strain response depends strongly on composition through operant deformation mechanisms, and cannot be explained based solely on measured differences in the transformation temperatures. We provide fundamental connections between the material structure, deformation mechanisms, and resulting stress-strain responses. The results help clarify some inconsistencies and common misconceptions in the literature. Ramifications on materials selection and design for emerging biomedical applications of NiTi shape memory alloys are discussed.

  13. A dinuclear Ni(II) complex with two types of intramolecular magnetic couplings: Ni(II)-Ni(II) and Ni(II)-TTF*+.

    Science.gov (United States)

    Liu, Shi-Xia; Ambrus, Christina; Dolder, Stefan; Neels, Antonia; Decurtins, Silvio

    2006-11-27

    A dinuclear Ni(II) complex involving tetrathiafulvalene (TTF) radicals as ligands has been prepared and characterized, [Ni2(mu-Cl)2(L*+)2(I3)4(I2)3.(H2O)2.(C4H8O)3 (1), L = 4,5-bis(2-pyridylmethylsulfanyl)-4',5'-ethylenedithiotetrathiafulvalene. There are two types of intramolecular magnetic exchange interactions, namely one ferromagnetic Ni(II)-Ni(II) and one antiferromagnetic Ni(II)-TTF*+. This study is new in the respect of revealing a magnetic exchange interaction between a TTF*+ radical and a paramagnetic transition metal ion. This is due to the fact of a direct binding of the transition metal ion to the skeleton of the TTF*+ radical.

  14. Microscopic phase field study of the antisite defect of Ni3 Al in binary Ni-Al alloys

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The temporal evolution feature of a microscopic phase field model is utilized to study the antisite defects of L1 2-Ni 3 Al;this is quite different from other physicist’ interests.There are mainly two points in brief.Firstly,antisite defects Ni Al and Al Ni ,which are caused by the deviation from the stoichiometric Ni 3 Al,coexist in the Ni 3 Al phase.The surplus Ni atom in the Ni-rich side is prone to substitute Al thus producing the antisite defect Ni Al that maintains the stability of the L1 2 structure.In other case,the surplus Al atom in the Al-rich side is accommodated by a Ni sublattice consequently giving rise to antisite defect Al Ni .The calculated equilibrium occupancy probability of Ni Al is much higher than that of Al Ni .This point is generally in line with other theoretical and experimental works.Additionally,both Ni Al and Al Ni have a strong negative correlation to time step during the disorder-order transformation.Since the initial value of Ni Al and Al Ni on each site of the matrix is right at the concentration that we set,we can observe the decrease process of Ni Al and Al Ni from the initial disordered high anti-structure state to their respective equilibrium state,i.e.to the result of the ordering process further coarsening.

  15. Thermodynamic assessment of the Ni-Sb binary system

    Institute of Scientific and Technical Information of China (English)

    CAO Zhanmin; TAKADU Yoshikazu; OHNUMA Ikuo; KAINUMA Ryosuke; ZHU Hongmin; ISHIDA Kiyohito

    2008-01-01

    The Ni-Sb binary alloy system was thermodynamically assessed using CALPHAD approach in this article.Excess Gibbs energies of solution phases,liquid and fcc phases,were formulated using the Redlich-Kister expression.The intermediate phases were modeled by the sublattice model with (Ni,Va)0.5(Ni,Sb)0.25(Ni)0.25 for Ni3Sb_HT phase and (Ni,Va)0.3333(Sb)0.3333(Ni,Va)0.3333 for NiSb phase.The other phases including Ni3Sb,Ni7Sb3,and NiSb2 were treated as stoichiometric compound owing to their narrow composition ranges.Based on the reported thermodynamic properties and phase diagram data,the thermodynamic parameters of these phases were optimized,and the obtained values can reproduce the available experimental data well.

  16. The cytotoxicity of NiO nanoparticle with borate capping.

    Science.gov (United States)

    Liu, Zunjing; Wang, Yongjing; Pan, Danmei; Chen, Zhi; Pan, Xiaohong; Wang, Yonghao; Lin, Zhang

    2011-11-01

    The impact of surface capping on cytotoxicity of NiO nanoparticle was investigated with Escherichia coil (E.coli) in this work. The NiO nanoparticle and NiO nanoparticle capped by borate (denoted as NiO-borate) were synthesized by hydrothermal method. The average size of both nanoparticles is about 4.0 nm. The plate experiments demonstrated that NiO-borate nanoparticles show lower cytotoxicity than NiO nanopaticles. Further spectrophotometric analysis revealed that the concentration of both extracellular and intercellular Ni2+ in NiO-borate system were lower than that of uncapped one. Intracellular ICP-AES analysis also showed the concentration of Ni element was higher than Ni2+, suggesting the NiO nanoparticles might penetrate into the cellular interior. Comprehensive AFM, SEM and TEM observation illustrated both NiO-borate and NiO nanoparticles lead to the collapse of cellular body, the convex on the cell wall and the damage of cell wall ultimately. In summary, the surface capping with borate on NiO nanopaticles will suppress the release of the Ni2+ ions and impede the contact between the NiO nanoparticle and cell wall, which ultimately decreased the cytotoxicity of NiO nanoparticles.

  17. Relation between shape of Ni-particles and Ni migration in Ni-YSZ electrodes – a hypothesis

    DEFF Research Database (Denmark)

    Mogensen, Mogens Bjerg; Hauch, Anne; Sun, Xiufu

    2016-01-01

    pressure (pH2O) gradient as previously observed [1], but in the present cases Ni seems to migrate up the pH2O gradient. However, it is also observed that there is a preceding phase in this Ni-YSZ electrode degradation, namely that the Ni-particles closest to the YSZ electrolyte loose contact to each other....... This means that the active three phase boundary (TPB) moves away from the electrolyte and causes a significant increase in the ohmic resistance as is also observed in electrochemical impedance spectra....

  18. Synthesis, structure and reactivity of Ni site models of [NiFeSe] hydrogenases.

    Science.gov (United States)

    Wombwell, Claire; Reisner, Erwin

    2014-03-21

    A series of structural models of the Ni centre in [NiFeSe] hydrogenases has been developed which exhibits key structural features of the Ni site in the H2 cycling enzyme. Specifically, two complexes with a hydrogenase-analogous four-coordinate 'NiS3Se' primary coordination sphere and complexes with a 'NiS2Se2' and a 'NiS4' core are reported. The reactivity of the complexes towards oxygen and protons shows some relevance to the chemistry of [NiFeSe] hydrogenases. Exposure of a 'NiS3Se' complex to atmospheric oxygen results in the oxidation of the selenolate group in the complex to a diselenide, which is released from the nickel site. Oxidation of the selenolate ligand on Ni occurs approximately four times faster than oxidation with the analogous sulfur complex. Reaction of the complexes with one equivalent of HBF4 results in protonation of the monodentate chalcogenolate and the release of this ligand from the metal centre as a thiol or selenol. Unrelated to their biomimetic nature, the complexes serve also as molecular precursors to modify electrodes with Ni-S-Se containing particles by electrochemical deposition. The activated electrodes evolve H2 in pH neutral water with an electrocatalytic onset potential of -0.6 V and a current density of 15 μA cm(-2) at -0.75 V vs. NHE.

  19. Niño maltratado

    Directory of Open Access Journals (Sweden)

    Ana Ivis Crespo Barrios

    1996-12-01

    Full Text Available Se presentan 200 niños maltratados que acuden al Hospital Pediátrico Docente "Juan Manuel Márquez" en el período comprendido de diciembre de 1990 a enero de 1992; éstos fueron seleccionados teniendo en cuenta los criterios de maltrato, y era el objetivo fundamental del estudio conocer cómo se comporta en nuestro medio. En los resultados se muestra que la forma más frecuente fue el tipo no intencional; la ingestión de tóxicos fue la forma de negligencia física más frecuente dentro del maltrato no intencional, ésta es más usual en los niños menores de 5 años; los trastornos psiquiátricos y el alcoholismo son favorecedores del maltrato intencional, la madre es la que más maltrata; la mortalidad por esta causa no fue elevada (5 fallecidos y los criterios de riesgo de maltrato tienen utilidad para su identificación.200 mistreated children who were seen at the "Juan Manual Márquez" Pediatric Teaching Hospital from December, 1990 to January, 1992, are presented. These patients were selected taking into consideration the abuse criteria. The main objective of this paper was to know how these criteria behave in our enviroment. According to the results, the most common form was the non-intentional type. The ingestion of toxic agents was the most frequent form of physical neglect within the non-intentional mistreatment, and it is the most usual among children under 5. Psychiatric disorders and alcoholism favor the intentional mistreatment, and the mother mistreats the most. Mortality due to this cause was not high (5 deaths, and the abuse risk criteria are useful for its identification.

  20. Effect of Electromigration on Interfacial Reaction in Ni/Sn/Ni-P Solder Joint%电迁移对Ni/Sn/Ni-P焊点界面反应的影响

    Institute of Scientific and Technical Information of China (English)

    陈雷达; 周少明; 黄明亮

    2012-01-01

    The line-type Ni/Sn/Ni-P(Au) solder joints were used to determine the effect of electromigration (EM) on interfacial reaction under the current density of 5.0×103 A/cm2 at 150 ℃. For comparison, the Ni/Sn/Ni-P(Au) interconnects were aged at the same temperature for the same duration. The results show that the current direction plays an important rule on Ni-P layer consumption. When electrons flowed from Ni-P side to Ni side (Ni-P layer was the cathode), EM accelerated the Ni-P layer consumption. More Ni-P layer was consumed with increasing EM time. After EM for 100 h and 200 h, 5.88 μm and 13.46 urn Ni-P layer were consumed, respectively. Instead of Ni3Sn4, Ni2SnP IMC layer was observed at the Sn/Ni-P interface, and there was a porous Ni3P layer between Ni2SnP IMC and Ni-P. When electrons flowed from Ni side to Ni-P side (Ni-P layer was the anode), no obvious Ni-P layer consumption was observed during EM, and Ni3Sn4 IMC formed at the Sn/Ni-P interface. The thickness of the Ni3Sn4 IMC increased slowly with increasing EM time and reached to 1.81 μm after EM for 200 h.%研究了温度为150℃,电流密度为5.0×103A/cm2的条件下电迁移对Ni/Sn/Ni-P(Au)线性接头中界面反应的影响.结果表明电流方向对Ni-P层的消耗起着决定作用.当Ni-P层为阴极时,电迁移加速了Ni-P层的消耗,即随着电迁移时间的延长,Ni-P层的消耗显著增加;电迁移100 h后Ni-P层消耗了5.88 μm,电迁移200 h后Ni-P层消耗了13.46μm.在Sn/Ni-P的界面上形成了一层Ni2SnP化合物而没有观察到Ni3Sn4化合物的存在,多孔状的Ni3P层位于Ni2SnP化合物与Ni-P层之间.当Ni-P层为阳极时,在电迁移过程中并没有发现Ni-P层的明显消耗,在Sn/Ni-P的界面处生成层状的Ni3Sn4化合物,其厚度随着电迁移时间的延长而缓慢增加,电迁移200 h后Ni3Sn4层的厚度达到1.81 μm.

  1. niños pre-escolares

    Directory of Open Access Journals (Sweden)

    Sandra León Muñoz

    2006-01-01

    Full Text Available Este estudio tuvo como objetivo caracterizar las producciones narrativas orales de niños de pre-escolar y relacionar estos desempeños con la lectura de imágenes. Se conformó una muestra de 9 niños entre 4 y 6 años que pertenecían a instituciones de educación formal. Se realizó un análisis de tarea de la historieta presentada y la aplicación de ésta fue de manera individual en el contexto familiar del niño. Los resultados mostraron que los niños identificaban la situación inicial de la narración, en la cual relacionaban personajes principales, actividades propias de ellos y del espacio donde sucedían sin embargo, a medida que se avanzaban en el procedimiento, se observó cómo se dificultaba para los niños la elaboración de las otras categorías que estructuran la narración como la complicación, la reacción, la resolución y la situación final. En relación con las estrategias cognitivas se observó que cuatro niños se encuentra en un nivel cognitivo bajo, cuatro se encuentra en un nivel cognitivo medio y un niño, en un nivel cognitivo alto. En cuanto a los procesos de lectura de imágenes se encontró que sólo dos niños utilizaron la referencia y dos niños usaron conectores temporales

  2. Synthesis of Supported NiPt Bimetallic Nanoparticles, Methods for Controlling the Surface Coverage of Ni Nanoparticles With Pt, Methods Of Making NiPt Multilayer Core-Shell Structures and Application of the Supported Catalysts for CO2 Reforming

    KAUST Repository

    Li, Lidong

    2015-06-25

    Embodiments of the present disclosure provide for supported Ni/Pt bimetallic nanoparticles, compositions including supported NiPt nanoparticles, methods of making supported NiPt nanoparticles, methods of using supported NiPt nanoparticles, and the like.

  3. Nickel Release, ROS Generation and Toxicity of Ni and NiO Micro- and Nanoparticles.

    Directory of Open Access Journals (Sweden)

    Siiri Latvala

    Full Text Available Occupational exposure to airborne nickel is associated with an elevated risk for respiratory tract diseases including lung cancer. Therefore, the increased production of Ni-containing nanoparticles necessitates a thorough assessment of their physical, chemical, as well as toxicological properties. The aim of this study was to investigate and compare the characteristics of nickel metal (Ni and nickel oxide (NiO particles with a focus on Ni release, reactive oxygen species (ROS generation, cellular uptake, cytotoxicity and genotoxicity. Four Ni-containing particles of both nano-size (Ni-n and NiO-n and micron-size (Ni-m1 and Ni-m2 were tested. The released amount of Ni in solution was notably higher in artificial lysosomal fluid (e.g. 80-100 wt% for metallic Ni than in cell medium after 24h (ca. 1-3 wt% for all particles. Each of the particles was taken up by the cells within 4 h and they remained in the cells to a high extent after 24 h post-incubation. Thus, the high dissolution in ALF appeared not to reflect the particle dissolution in the cells. Ni-m1 showed the most pronounced effect on cell viability after 48 h (alamar blue assay whereas all particles showed increased cytotoxicity in the highest doses (20-40 μg cm2 when assessed by colony forming efficiency (CFE. Interestingly an increased CFE, suggesting higher proliferation, was observed for all particles in low doses (0.1 or 1 μg cm-2. Ni-m1 and NiO-n were the most potent in causing acellular ROS and DNA damage. However, no intracellular ROS was detected for any of the particles. Taken together, micron-sized Ni (Ni-m1 was more reactive and toxic compared to the nano-sized Ni. Furthermore, this study underlines that the low dose effect in terms of increased proliferation observed for all particles should be further investigated in future studies.

  4. Preparation of hcp and fcc Ni and Ni/NiO Nanoparticles Using a Citric Acid Assisted Pechini-Type Method

    Directory of Open Access Journals (Sweden)

    L. A. García-Cerda

    2011-01-01

    Full Text Available The preparation and characterization of hcp and fcc Ni and Ni/NiO nanoparticles is reported. Ni and Ni/NiO nanoparticles were obtained starting from a precursor material prepared using a citric assisted Pechini-type method and, then, followed by a calcination of the precursor in air at either 400 or 600°C for different times. The precursor was analyzed using thermogravimetric and differential thermal methods (TGA-DTA, and the resulting nanoparticles were characterized by X-ray diffraction (XRD, high-resolution transmission electron microscopy (HRTEM, and vibrational sample magnetometry. Nanoparticles showed a phase transformation for Ni from hcp to fcc and/or to fcc NiO structure as the calcination time increased. The influence of the phase transition and the formation of NiO on the magnetic properties of the samples are discussed.

  5. Ni nanoparticles prepared by simple chemical method for the synthesis of Ni/NiO-multi-layered graphene by chemical vapor deposition

    Science.gov (United States)

    Ali, Mokhtar; Remalli, Nagarjuna; Gedela, Venkataramana; Padya, Balaji; Jain, Pawan Kumar; Al-Fatesh, Ahmed; Rana, Usman Ali; Srikanth, Vadali V. S. S.

    2017-02-01

    A new chemical method was used to obtain a high yield of nickel nanoparticles (Ni-NPs). The effect of solvent (distilled water, ethylene glycol, and ethanol) and surfactant (oleic acid and polyvinyl pyrrolidinone) on the morphology and crystallinity of the synthesized Ni-NPs has been investigated. The experimental results revealed that among the solvents mentioned above, ethanol gives the best results in terms of complete reduction, controlled morphology and size distribution of Ni-NPs. The surfactants played an important role in impeding the agglomeration and surface oxidation of Ni-NPs. The surfactants also affected the morphology of the Ni-NPs. The synthesized Ni-NPs are found to be quite stable in air. The best of the synthesized Ni-NPs were effectively used as catalysts for the synthesis of Ni/NiO-multi-layered graphene using catalytic chemical vapor deposition technique.

  6. Thermal diffusion in Ni/Al multilayer

    Energy Technology Data Exchange (ETDEWEB)

    Swain, M.; Bhattacharya, D.; Singh, S.; Basu, S. [Solid State Physics Division, Bhabha Atomic Research Center, Mumbai 400085 (India); Gupta, M. [UGC-DAE-Consortium for Scientific Research, University Campus, Khandwa Road, Indore 452017 (India)

    2013-02-05

    Two Ni/Al multilayers deposited by ion beam sputtering of nominal design [Ni(200A)/Al(100A)] Multiplication-Sign 5 and [Ni(50A)/Al(227A)] Multiplication-Sign 5 on Si substrates were annealed at 200 Degree-Sign C. As-deposited and annealed samples were characterized by x-ray diffraction (XRD) and x-ray reflectometry (XRR). The effort was to study the path of alloying in the above two multilayers of same elements but of opposite stoichiometric ratio. We find distinct differences in alloying of these samples.

  7. De niños e infancias

    OpenAIRE

    Camenen, Gersende; Liendo, Victoria

    2014-01-01

    A Sarmiento, el niño sabio, lo llevan de casa en casa como al prodigio del pueblo para oírlo leer en voz alta. Norah Lange, la niña excéntrica, grita desaforada en distintos idiomas y finge carcajadas enloquecidas desde el techo de su casa hasta gastar la voz. Reinaldo Arenas, el niño salvaje, escribe, como Celestino, poemas con un cuchillo en el tronco los árboles para que no amanezca. Borges, el traductor precoz, lee a los seis años el Quijote en inglés sin tener la menor sospecha de que el...

  8. New developments in Ni/Ti multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, I.; Hoghoj, P. [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France)

    1997-04-01

    It is now 20 years since super-mirrors were first used as a neutron optical element. Since then the field of multilayer neutron-optics has matured with multilayers finding their way to application in many neutron scattering instruments. However, there is still room for progress in terms of multilayer quality, performance and application. Along with work on multilayers for neutron polarisation Ni/Ti super-mirrors have been optimised. The state-of-the-art Ni/Ti super-mirror performance and the results obtained in two neutron-optics applications of Ni/Ti multilayers are presented. (author).

  9. Ni{sub 3}Al aluminide alloys

    Energy Technology Data Exchange (ETDEWEB)

    Liu, C.T.

    1993-10-01

    This paper provides a brief review of the recent progress in research and development of Ni{sub 3}Al and its alloys. Emphasis has been placed on understanding low ductility and brittle fracture of Ni{sub 3}Al alloys at ambient and elevated temperatures. Recent studies have resulted in identifying both intrinsic and extrinsic factors governing the fracture behavior of Ni{sub 3}Al alloys. Parallel efforts on alloy design using physical metallurgy principles have led to properties for structural use. Industrial interest in these alloys is high, and examples of industrial involvement in processing and utilization of these alloys are briefly mentioned.

  10. Nanocrystalline Ni-W coatings on copper

    Energy Technology Data Exchange (ETDEWEB)

    Panagopoulos, C.N., E-mail: chpanag@metal.ntua.gr [Laboratory of Physical Metallurgy, National Technical University of Athens, Zografos, 15780, Athens (Greece); Plainakis, G.D.; Lagaris, D.A. [Laboratory of Physical Metallurgy, National Technical University of Athens, Zografos, 15780, Athens (Greece)

    2011-04-15

    Nanocrystalline Ni-W coatings were produced on copper substrates with the aid of electrodeposition technique. The morphology, chemical composition and structure of the produced coatings were examined with the aid of scanning electron microscopy (SEM), electron dispersive spectroscopy (EDS) and X-ray diffraction (XRD) techniques. The microhardness of alloy Ni-W coatings on copper substrate was also studied. The adhesion between the Ni-W coating, having W content 50 wt%, and the copper substrate, was also studied with a scratch testing apparatus. The scratch tests resulted in the coatings suffering an intensive brittle fracture and minor delamination.

  11. Synthesis of Ni-poor NiO nanoparticles for p-DSSC applications

    Science.gov (United States)

    Polteau, Baptiste; Tessier, Franck; Cheviré, François; Cario, Laurent; Odobel, Fabrice; Jobic, Stéphane

    2016-04-01

    To improve the performances of p-Dye Sensitized Solar Cell (p-DSSC) for the future, the synthesis of modified p-type nickel oxide semiconductor, commonly used as photocathode in such devices, was initiated with Ni3O2(OH)4 as precursor. This specific nickel oxyhydroxide was first characterized by X-ray photo-electron spectroscopy and magnetic susceptibility measurements. Then its thermal decomposition was thoroughly studied in order to control the particles size of the as-prepared NiO nanopowders. Low temperature decomposition in air of this precursor allows the formation of Ni1-xO nanoparticles with a large amount of Ni vacancies and specific surface areas up to 250 m2 g-1. Its ammonolysis at 250 °C leads to nanostructured N-doped NiO (NiO:N) materials.

  12. NiCo-lead zirconium titanate-NiCo trilayered magnetoelectric composites prepared by electroless deposition

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, M. H.; Wang, Y. G.; Bi, K., E-mail: bike@bupt.edu.cn [State Key Laboratory of Information Photonics and Optical Communications and School of Science, Beijing University of Posts and Telecommunications, Beijing 100876 (China); Fan, H. P. [School of Mechanical and Electrical Engineering, Qingdao Technological University Qindao College, Qingdao 266106 (China); Zhao, Z. S. [Shandong Engineering Consulting Institute, Jinan 250013 (China)

    2015-04-15

    The NiCo layers with various Ni/Co atomic ratio have been successfully electroless deposited on PZT layers by varying the bath composition. As the cobalt atomic ratio in the deposited layer increases from 17.2 to 54.8 wt%, the magnetostrictive coefficient decreases. The magnetoelectric effect depends strongly on the magnetostrictive properties of magnetostrictive phase. The magnetoelectric coefficient of NiCo/PZT/NiCo trilayers increases with Ni/Co atomic ratio of the deposited NiCo layers increasing from 45:55 to 83:17. A maximum ME voltage coefficient of α{sub E,31} = 2.8 V ⋅ cm{sup −1} ⋅ Oe{sup −1} is obtained at a frequency of about 88 kHz, which makes these trilayers suitable for applications in actuators, transducers and sensors.

  13. NiCo-lead zirconium titanate-NiCo trilayered magnetoelectric composites prepared by electroless deposition

    Directory of Open Access Journals (Sweden)

    M. H. Zhou

    2015-04-01

    Full Text Available The NiCo layers with various Ni/Co atomic ratio have been successfully electroless deposited on PZT layers by varying the bath composition. As the cobalt atomic ratio in the deposited layer increases from 17.2 to 54.8 wt%, the magnetostrictive coefficient decreases. The magnetoelectric effect depends strongly on the magnetostrictive properties of magnetostrictive phase. The magnetoelectric coefficient of NiCo/PZT/NiCo trilayers increases with Ni/Co atomic ratio of the deposited NiCo layers increasing from 45:55 to 83:17. A maximum ME voltage coefficient of αE,31 = 2.8 V ⋅ cm−1 ⋅ Oe−1 is obtained at a frequency of about 88 kHz, which makes these trilayers suitable for applications in actuators, transducers and sensors.

  14. Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

    Institute of Scientific and Technical Information of China (English)

    YAN Zhu; CUI Li-shan; ZHENG Yan-jun

    2007-01-01

    The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive welding, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem.Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The transformation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.

  15. Crystallographic Orientation Effect on Electromigration in Ni-Sn Microbump

    Science.gov (United States)

    Huang, Yi-Ting; Chen, Chih-Hao; Chakroborty, Subhendu; Wu, Albert T.

    2017-09-01

    This article addresses the reliability challenges regarding electromigration in developing three-dimensional integrated circuits (3D-ICs). The line-type sandwich structure of Ni/Sn3.5Ag(15 μm)/Ni was used to simulate microbumps to examine the reliability of electromigration in 3D-IC technology. The solder strip of Ni/Sn3.5Ag(15 μm)/Ni was stressed with a current density of 1.0 × 104 A/cm2 at 150°C. The current stressing enhanced the reaction between the solder and Ni to form Ni3Sn4, which occupied the entire joint and transformed into a Ni/Ni3Sn4/Ni structure when the solder was completely consumed. Electron backscatter diffraction was used to analyze the crystallographic characteristics of Sn and Ni3Sn4 as related to the electromigration effect. The results indicated that the crystallographic orientation of Sn plays a significant role in the Ni/Sn3.5Ag/Ni, whereas the orientation of Ni3Sn4 is the dominant factor of diffusion behavior in the Ni/Ni3Sn4/Ni.

  16. Crystallographic Orientation Effect on Electromigration in Ni-Sn Microbump

    Science.gov (United States)

    Huang, Yi-Ting; Chen, Chih-Hao; Chakroborty, Subhendu; Wu, Albert T.

    2017-07-01

    This article addresses the reliability challenges regarding electromigration in developing three-dimensional integrated circuits (3D-ICs). The line-type sandwich structure of Ni/Sn3.5Ag(15 μm)/Ni was used to simulate microbumps to examine the reliability of electromigration in 3D-IC technology. The solder strip of Ni/Sn3.5Ag(15 μm)/Ni was stressed with a current density of 1.0 × 104 A/cm2 at 150°C. The current stressing enhanced the reaction between the solder and Ni to form Ni3Sn4, which occupied the entire joint and transformed into a Ni/Ni3Sn4/Ni structure when the solder was completely consumed. Electron backscatter diffraction was used to analyze the crystallographic characteristics of Sn and Ni3Sn4 as related to the electromigration effect. The results indicated that the crystallographic orientation of Sn plays a significant role in the Ni/Sn3.5Ag/Ni, whereas the orientation of Ni3Sn4 is the dominant factor of diffusion behavior in the Ni/Ni3Sn4/Ni.

  17. Photoactivation of the Ni-SIr state to the Ni-SIa state in [NiFe] hydrogenase: FT-IR study on the light reactivity of the ready Ni-SIr state and as-isolated enzyme revisited.

    Science.gov (United States)

    Tai, Hulin; Xu, Liyang; Inoue, Seiya; Nishikawa, Koji; Higuchi, Yoshiki; Hirota, Shun

    2016-08-10

    The Ni-SIr state of [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F was photoactivated to its Ni-SIa state by Ar(+) laser irradiation at 514.5 nm, whereas the Ni-SL state was light induced from a newly identified state, which was less active than any other identified state and existed in the "as-isolated" enzyme.

  18. Effect of metallic content on mechanical property of Ni/(10NiO-NiFe2O4) cermets

    Institute of Scientific and Technical Information of China (English)

    LI Jie; ZHANG Gang; YE Shao-long; LAI Yan-qing; TIAN Zhong-liang; SUN Xiao-gang

    2006-01-01

    Ni/ (10NiO-NiFe2O4 ) cermets were fabricated by using cold pressing-sintering method. The phase composition and effect of metallic content on the mechanical properties such as bending strength, Vickers' hardness,fracture toughness and thermal shock resistance were studied. The results show that the cermets consist of Ni, NiO and NiFe2O4. Within the range of metallic content from 0 to 17% (mass fraction), the relative density decreases with the increase of metallic content and the decrease of sintering temperature, Vickers' hardness decreases from 7 097 MPa to 4 814 MPa and the bending strength increases from 110 MPa to 157 MPa, and the fracture toughness mal shock testing falls sharply as the thermal shock temperature difference is above 200℃. The cermets samples,whose metallic content is 10% and 15%, respectively, exhibit promising property of thermal shock resistance at 960 ℃ with six cycles of heating and quenching testing.

  19. Electronic structure of graphene on Ni surfaces with different orientation

    Energy Technology Data Exchange (ETDEWEB)

    Pudikov, D.A., E-mail: gelbry@gmail.com; Zhizhin, E.V.; Rybkin, A.G.; Rybkina, A.A.; Zhukov, Y.M.; Vilkov, O. Yu.; Shikin, A.M.

    2016-08-15

    An experimental study of the graphene, synthesized by propylene cracking on Ni surfaces with different orientation: (100) and (111), using angle-resolved photoemission, has been performed. It has been shown that graphene on Ni(111) had a perfect lateral structure due to consistency of their lattices, whereas graphene/Ni(100) consisted of a lot of domains. For both systems electronic structure was quite similar and demonstrated a strong bonding of graphene to the underlying Ni surface. After Au intercalation the electronic structure of graphene in both systems was shifted to the Fermi level and became linear in the vicinity of the K point of the Brillouin zone. - Highlights: • Graphene on Ni(111) is well-ordered, whereas on Ni(100) – multi-domain. • Graphene on Ni(111) and Ni(100) is strongly bonded with substrate. • Intercalation of Au atoms restores the linearity in dispersion and makes graphene quasi-free on both Ni(100) and Ni(111).

  20. Electrodeposited NiCu Alloy Catalysts for Glucose Oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Jieun; Park, Hansoo; Kim, Sookil [Chung-Ang Univ., Seoul (Korea, Republic of); Ahn, Sang Hyun; Jang, Jong Hyun [Korea Institute of Science and Technology, Seoul (Korea, Republic of)

    2014-07-15

    NiCu alloys have been suggested as potential candidates for catalysts in glucose oxidation. In this study, NiCu alloys with different compositions were prepared on a glassy carbon substrate by changing the electrodeposition potential to examine the effect of Ni/Cu ratios in alloys on catalytic activity toward glucose oxidation. Cyclic voltammetry and chronoamperometry showed that NiCu alloys had higher catalytic activity than pure Ni and Cu catalysts. Especially, Ni{sub 59}Cu{sub 41} had superior catalytic activity, which was about twice that of Ni at a given oxidation potential. X-ray analyses showed that the oxidation state of Ni in NiCu alloys was increased with the content of Cu by lattice expansion. Ni components in alloys with higher oxidation state were more effective in the oxidation of glucose.

  1. Mechanical properties of NiO/Ni-YSZ composites depending on temperature, porosity and redox cycling

    DEFF Research Database (Denmark)

    Pihlatie, Mikko; Kaiser, Andreas; Mogensen, Mogens Bjerg

    2009-01-01

    with the Neel temperature, 250 degrees C, of NiO was observed. Above this temperature, a linear decrease occurred. Specific damping showed a peak at 170-180 degrees C and increased above ca. 1000 degrees C in NiO-YSZ. In the reduced state the elastic modulus decreased linearly with temperature; specific damping......The Impulse Excitation Technique (IET) was used to determine the elastic modulus and specific damping of different Ni/NiO-YSZ composites suitable for use in solid oxide fuel cells (SOFC). The porosity of the as-sintered samples varied from 9 to 38% and that of the reduced ones from 31 to 52...

  2. Studies on the valence electronic structure of Fe and Ni in FeNi1- alloys

    Indian Academy of Sciences (India)

    D K Basa; S Raj; H C Padhi; M Polasik; F Pawlowski

    2002-05-01

    -to- X-ray intensity ratios of Fe and Ni in pure metals and in FeNi1- alloys ( = 0.20, 0.50, 0.58) exhibiting similar crystalline structure have been measured following excitation by 59.54 keV -rays from a 241Am point source, to understand as to why the properties of permalloy Fe0.2Ni0.8 is distinct from other alloy compositions. It is observed that the valence electronic structure of Fe0.2Ni0.8 alloy is totally different from other alloys which may be attributed to its special magnetic properties.

  3. Polymer stabilized Ni-Ag and Ni-Fe alloy nanoclusters: Structural and magnetic properties

    Energy Technology Data Exchange (ETDEWEB)

    Kabir, L.; Mandal, A.R. [Department of Physics, Visva-Bharati, Santiniketan-731 235 (India); Mandal, S.K., E-mail: sk_mandal@hotmail.co [Department of Physics, Visva-Bharati, Santiniketan-731 235 (India)

    2010-04-15

    We report here the structural and magnetic behaviors of nickel-silver (Ni-Ag) and nickel-iron (Ni-Fe) nanoclusters stabilized with polymer (polypyrrole). High resolution transmission electron microscopy (HRTEM) indicates Ni-Ag nanoclusters to stabilize in core-shell configuration while that of Ni-Fe nanoclusters in a mixed type of geometry. Structural characterizations by X-ray diffraction (XRD) reveal the possibility of alloying in such bimetallic nanoclusters to some extent even at temperatures much lower than that of bulk alloying. Electron paramagnetic resonance (EPR) spectra clearly reveal two different absorption behaviors: one is ascribed to non-isolated Ni{sup 2+} clusters surrounded by either silver or iron giving rise to a broad signal, other (very narrow signal) being due to the isolated superparamagnetic Ni{sup 2+} clusters or bimetallic alloy nanoclusters. Results obtained for Ni-Ag and Ni-Fe nanoclusters have been further compared with the behavior exhibited by pure Ni nanoclusters in polypyrrole host. Temperature dependent studies (at 300 and 77 K) of EPR parameters, e.g. linewidth, g-value, line shape and signal intensity indicating the significant influence of surrounding paramagnetic silver or ferromagnetic iron within polymer host on the EPR spectra have been presented.

  4. Directional Solidification and Mechanical Properties of NiAl-NiAlTa Alloys

    Science.gov (United States)

    Johnson, D. R.; Chen, X. F.; Oliver, B. F.; Noebe, R. D.; Whittenberger, J. D.

    1995-01-01

    Directional solidification of eutectic alloys is a promising technique for producing in-situ composite materials exhibiting a balance of properties. Consequently, the microstructure, creep strength and fracture toughness of directionally solidified NiAl-NiAlTa alloys were investigated. Directional solidification was performed by containerless processing techniques to minimize alloy contamination. The eutectic composition was found to be NiAl-15.5 at% Ta and well-aligned microstructures were produced at this composition. A near-eutectic alloy of NiAl-14.5Ta was also investigated. Directional solidification of the near-eutectic composition resulted in microstructures consisting of NiAl dendrites surrounded by aligned eutectic regions. The off-eutectic alloy exhibited promising compressive creep strengths compared to other NiAl-based intermetallics, while preliminary testing indicated that the eutectic alloy was competitive with Ni-base single crystal superalloys. The room temperature toughness of these two-phase alloys was similar to that of polycrystalline NiAl even with the presence of the brittle Laves phase NiAlTa.

  5. Differences of transformation behavior between Ni-rich TiNi shape memory films and alloys

    Institute of Scientific and Technical Information of China (English)

    贺志荣; 周敬恩

    2002-01-01

    The differences of transformation behavior between Ni-rich TiNi shape memory film (SMF) and shape memory alloy (SMA) age-treated at 773K after solution-treatment at 973K have been investigated, using Ti-51.5Ni thin film and Ti-51.5Ni bulk alloy as examples, by differential scanning calorimetry (DSC), SEM and EDX. It is found that the age-treated Ni-rich TiNi SMF and SMA are of the same types of transformation, i.e., A→R→M (during cooling), and M→A (during heating) (A: parent phase; R: R-phase; M: martensite); the transformation temperature of the TiNi SMF is lower than that of the SMA, but the SMFs hysteresis is larger. The transformation heat of the TiNi SMF and SMA is nearly the same. The reason that TiNi SMFs strain is sensitive to temperature is not hysteresis, but its thickness is thinner, and the temperature is easy to distribute homogeneously.

  6. Martensitic Transformation of TiNi Shape Memory Alloy Fiber Reinforced Ni Matrix Composites

    Institute of Scientific and Technical Information of China (English)

    Lishan CUI; Yan LI; Yan jun ZHENG; Huibin XU

    2003-01-01

    In this paper, a TiNi shape memory alloy fiber Ni matrix composite was fabricated by an electroplating method using TiNialloy as the cathode and Ni as the anode. The constrained martensitic transformation behaviors of the TiNi alloy were studiedby differential scanning calorimeter (DSC), and the results showed that two endothermic peaks appear on the DSC heatingcurves and the reverse transformation temperatures increase with increasing prestrain levels. Moreover, comparing to the freetransformation, the temperature window of the constrained reverse transformation is widely expanded due to the influence ofrecovery stress.

  7. Layering and temperature-dependent magnetization and anisotropy of naturally produced Ni/NiO multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Pappas, S. D.; Trachylis, D.; Velgakis, M. J. [Laboratory of High-Tech Materials, School of Engineering, University of Patras, 26504 Patras (Greece); Kapaklis, V.; Joensson, P. E.; Papaioannou, E. Th. [Department of Physics and Astronomy, Uppsala University, Box 516, SE-751 20 Uppsala (Sweden); Delimitis, A. [Chemical Process Engineering Research Institute (CPERI), Centre for Research and Technology Hellas (CERTH), 57001 Thermi, Thessaloniki (Greece); Poulopoulos, P. [Laboratory of High-Tech Materials, School of Engineering, University of Patras, 26504 Patras (Greece); Institut fuer Experimentalphysik, Freie Universitaet Berlin, Arnimallee 14, D-14195 Berlin-Dahlem (Germany); Materials Science Department, University of Patras, 26504 Patras (Greece); Fumagalli, P. [Institut fuer Experimentalphysik, Freie Universitaet Berlin, Arnimallee 14, D-14195 Berlin-Dahlem (Germany); Politis, C. [Laboratory of High-Tech Materials, School of Engineering, University of Patras, 26504 Patras (Greece); Department of Materials Science and Engineering, University of Texas at Arlington, Arlington, Texas 76019 (United States)

    2012-09-01

    Ni/NiO multilayers were grown by magnetron sputtering at room temperature, with the aid of the natural oxidation procedure. That is, at the end of the deposition of each single Ni layer, air is let to flow into the vacuum chamber through a leak valve. Then, a very thin NiO layer ({approx}1.2 nm) is formed. Simulated x-ray reflectivity patterns reveal that layering is excellent for individual Ni-layer thickness larger than 2.5 nm, which is attributed to the intercalation of amorphous NiO between the polycrystalline Ni layers. The magnetization of the films, measured at temperatures 5-300 K, has almost bulk-like value, whereas the films exhibit a trend to perpendicular magnetic anisotropy (PMA) with an unusual significant positive interface anisotropy contribution, which presents a weak temperature dependence. The power-law behavior of the multilayers indicates a non-negligible contribution of higher order anisotropies in the uniaxial anisotropy. Bloch-law fittings for the temperature dependence of the magnetization in the spin-wave regime show that the magnetization in the multilayers decreases faster as a function of temperature than the one of bulk Ni. Finally, when the individual Ni-layer thickness decreases below 2 nm, the multilayer stacking vanishes, resulting in a dramatic decrease of the interface magnetic anisotropy and consequently in a decrease of the perpendicular magnetic anisotropy.

  8. Modeling and simulation of NiO dissolution and Ni deposition in molten carbonate fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Suk Woo; Choi, Hyung-Joon; Lim, Tae Hoon [Korea Institute of Science & Technology, Seoul (Korea, Republic of)] [and others

    1996-12-31

    Dissolution of NiO cathode into the electrolyte matrix is an important phenomena limiting the lifetime of molten carbonate fuel cell (MCFC). The dissolved nickel diffuses into the matrix and is reduced by dissolved hydrogen leading to the formation of metallic nickel films in the pores of the matrix. The growth of Ni films in the electrolyte matrix during the continuous cell operation results eventually in shorting between cathode and anode. Various mathematical and empirical models have been developed to describe the NiO dissolution and Ni deposition processes, and these models have some success in estimating the lifetime of MCFC by correlating the amount of Ni deposited in the matrix with shorting time. Since the exact mechanism of Ni deposition was not well understood, deposition reaction was assumed to be very fast in most of the models and the Ni deposition region was limited around a point in the matrix. In fact, formation of Ni films takes place in a rather broad region in the matrix, the location and thickness of the film depending on operating conditions as well as matrix properties. In this study, we assumed simple reaction kinetics for Ni deposition and developed a mathematical model to get the distribution of nickel in the matrix.

  9. Thermal stability of electrodeposited Ni and Ni-Co layers; an EBSD-study

    DEFF Research Database (Denmark)

    Rasmussen, Anette Alsted; Gholinia, A.; Trimby, P.W.

    2004-01-01

    The influence of heat treatment on the microstructure and the microtexture of electrodeposited Ni and Ni-Co layers was investigated with Electron Backscatter Diffraction (EBSD) with high resolution. Samples were annealed for 1 hour at 523 K and 673 K, the temperature region wherein recrystallisat......The influence of heat treatment on the microstructure and the microtexture of electrodeposited Ni and Ni-Co layers was investigated with Electron Backscatter Diffraction (EBSD) with high resolution. Samples were annealed for 1 hour at 523 K and 673 K, the temperature region wherein...

  10. Effect of Mg/Ni ratio on microstructure of Mg–Ni films deposited by magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, Junko, E-mail: junko.matsuda@i2cner.kyushu-u.ac.jp [International Institute for Carbon-Neutral Energy Research (WPI-I2CNER), Kyushu University, Motooka 744, Nishi-ku, Fukuoka 819-0395 (Japan); Uchiyama, Naoki; Kanai, Tomomi; Harada, Kazumi [ATSUMITEC CO., LTD., Ubumi 7111, Yuto-cho, Nishi-ku, Hamamatsu 431-0192 (Japan); Akiba, Etsuo [International Institute for Carbon-Neutral Energy Research (WPI-I2CNER), Kyushu University, Motooka 744, Nishi-ku, Fukuoka 819-0395 (Japan); Department of Mechanical Engineering, Faculty of Engineering, Kyushu University, Motooka 744, Nishi-ku, Fukuoka 819-0395 (Japan)

    2014-12-25

    Highlights: • Hydrogenation/dehydrogenation properties of Mg–Ni films depend on the Mg/Ni ratio. • Mg{sub 6}Ni films are composed of Mg-rich amorphous matrix and Mg{sub 2}Ni nanocrystals. • Mg{sub 2}Ni is fully amorphous, in contrast Mg crystallization occurs in Mg{sub 10}Ni films. • Mg{sub 6}Ni films after hydrogenation include Mg{sub 2}NiH{sub 4}, MgH{sub 2} and Mg crystals. • Mg crystallization causes to reduce desorption kinetics and cycle ability. - Abstract: The relationship between the Mg/Ni ratio and microstructure of Mg–Ni films with a Pd-cap deposited by magnetron sputtering is investigated using transmission electron microscopy. As a result, the 6Mg–Ni films are observed to be composed of a Mg-rich amorphous matrix and Mg{sub 2}Ni nanocrystals. In contrast, the 10Mg–Ni films contain Mg nanocrystals and Mg-rich amorphous. The 2Mg–Ni films, which absorb/desorb hydrogen repeatedly as well as 6Mg–Ni films, are fully amorphous and have a homogeneous distribution of Mg and Ni. The hydrogenated 6Mg–Ni film, after 200 cycles of hydrogenation/dehydrogenation, includes Mg{sub 2}NiH{sub 4} and MgH{sub 2} nanocrystals as well as Mg crystals. In conclusion, the crystallization of Mg reduces desorption kinetics and cycle ability of the Mg–Ni films. Our results suggested that Mg crystallization occurs in films with an initial Mg/Ni ratio greater than 7.7 the eutectic composition between Mg and Mg{sub 2}Ni.

  11. GRAFIČNI PRISTOP K FIGURATIVNEMU SLIKARSTVU

    OpenAIRE

    Bergles, Niko

    2010-01-01

    V diplomskem delu z naslovom Grafični pristop k figurativnemu slikarstvu sem se posvetil tistim področjem likovne teorije in zgodovine, na podlagi katerih sem sam ustvarjal. Nalogo sem razdelil na tri dele

  12. Cavitation erosion of NiAl

    Energy Technology Data Exchange (ETDEWEB)

    Akhtar, A. [Powertech Labs. Inc., Surrey, British Columbia (Canada)]|[Univ. of British Columbia (Canada). Metals and Materials Engineering Dept.; Salvi, R. [Univ. of British Columbia (Canada). Metals and Materials Engineering Dept.; Sikka, V.K. [Oak Ridge National Lab., TN (United States). Metals and Ceramics Div.

    1999-02-01

    Vibratory cavitation erosion tests were carried out on as-cast NiAl intermetallic compounds containing 46.5 to 62.1 at. pct Ni. The erosion rate decreased with increasing nickel content by over two orders of magnitude, from a high of 16.4 to 0.11 mg{center_dot}h{sup {minus}1}. These low erosion rates exhibited by the nickel-rich alloys containing 58 and 62.1 at. pct Ni, the interruptions in their mass loss with time, and the unusual effects associated with surface finish and intensity of cavitation were found to be associated with the stress-induced martensitic transformation. Alloys containing 58 to 62 at. pct Ni have the potential for use as materials for the cavitation protection of hydraulic machinery.

  13. Prospect of MH-Ni Batteries Development

    Institute of Scientific and Technical Information of China (English)

    Xu Shaoping; Xing Zhiqiang; Liang Wanlong; Ma Yijun

    2004-01-01

    The development trend and promising application prospects of high-power MH-Ni battery were reviewed by studying and comparing the current high-power batteries research area.High-power MH-Ni batiery has good performlife with 500 ~ 1000 times, abundant material resource, especially abundant rare earth resource in China, high-rate discharging, rapid charging, good safety as well as no pollution, etc., which is regarded as the most promising storage battery for electric vehicles.The performance of high power MH-Ni battery can be brought into play fully and ensure electric vehicles performance if it is equipped with appropriate chargers, controlling system and electric motors.Facing opportunities and challenges, MH-Ni battery has promising application prospects on hybrid electric automobile, electric bicycle and a variety of small sized electric vehicles by improving its technology constantly and developing market actively.

  14. Ni adsorption and Ni-Al LDH precipitation in a sandy aquifer: An experimental and mechanistic modeling study

    NARCIS (Netherlands)

    Regelink, I.C.; Temminghoff, E.J.M.

    2011-01-01

    Mining activities and industries have created nickel (Ni) contaminations in many parts of the world. The objective of this study is to increase our understanding of Ni adsorption and Nickel-Aluminium Layered Double Hydroxide (Ni-Al LDH) precipitation to reduce Ni mobility in a sandy soil aquifer. At

  15. Amorphous Ni-P Hollow Spheres Prepared by Self-assembly of Ni-P Nanoparticles on Polystyrene Beads

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The first preparation of amorphous Ni-P/PS (polystyrene) core-shell and Ni-P hollow microspheres was per-formed using a surface seeding-electroless plating method. The preliminary magnetic properties of the amorphous Ni-P hollow sphere were investigated and compared with those of the Ni hollow sphere.

  16. Density and Structure Analysis of Molten Ni-W Alloys

    Institute of Scientific and Technical Information of China (English)

    Feng XIAO; Liang FANG

    2004-01-01

    Density of molten Ni and Ni-W alloys was measured in the temperature range of 1773~1873 K with a sessile drop method.The density of molten Ni and Ni-W alloys trends to decrease with increasing temperature. The density and molar volume of the alloys trend to increase with increasing W concentration in the alloys. The calculation result shows an ideal mixing of Ni-W alloys.

  17. Towards Single-component Molecular Conductor [Ni(dmit)2] by Charge Disproportionation:2[Ni(dmit)2]-0.5 →[Ni(dmit)2 ]+ [Ni(dmit)2]-

    Institute of Scientific and Technical Information of China (English)

    Qi FANG; Hong LEI; Wen XU

    2003-01-01

    A new method of synthesizing single-component molecular conductor [Ni(dmit)2] by the reaction 2(Me4N)[Ni(dmit)2]2→[Ni(dmit)2] + (Me4N)[Ni(dmit)2] is reported. [Ni(dmit)2] exhibits a semiconductive behavior above 167 K, while from 167 K down to the measuring limit of 60 K, it exhibits metallic conductivity.

  18. Autothermal Reforming and Partial Oxidation of Methane in Fluidized Reactor over Highly Dispersed Ni Catalyst Prepared from Ni Complex

    Institute of Scientific and Technical Information of China (English)

    GAO Jing; HOU Zhao-Yin; SHEN Kai; LOU Hui; FEI Jin-Hua; ZHENG Xiao-Ming

    2006-01-01

    Highly dispersed Ni catalysts on spherical SiO2 were prepared by simple impregnation of Ni(acac)2, [Ni-(NH3)6-n(H2O)n]2+, [Ni(en)3]2+ and [Ni(EDTA)]2-. Pulse adsorption of H2 and TEM analysis results confirmed that Ni was dispersed very well on the surface of SiO2 even after calcination (4 h) and reduction (1 h) at high temperature of 800 ℃. These highly dispersed and uniquely sized Ni crystallites were more stable and more reactive for both autothermal reforming and partial oxidation of methane in fluidized reactor.

  19. Effects of Ni content on the shape memory properties and microstructure of Ni-rich NiTi-20Hf alloys

    Science.gov (United States)

    Saghaian, S. M.; Karaca, H. E.; Tobe, H.; Pons, J.; Santamarta, R.; Chumlyakov, Y. I.; Noebe, R. D.

    2016-09-01

    Shape memory properties and microstructure of four Ni-rich NiTiHf alloys (Ni50.3Ti29.7Hf20, Ni50.7Ti29.3Hf20, Ni51.2Ti28.8Hf20, and Ni52Ti28Hf20 (at.%)) were systematically characterized in the furnace cooled condition. H-phase precipitates were formed during furnace cooling in compositions with greater than 50.3Ni and the driving force for nucleation increased with Ni content. Alloy strength increased while recoverable strain decreased with increasing Ni content due to changes in precipitate characteristics. When the precipitates were small (˜5-15 nm), they were readily absorbed by martensite plates, which resulted in maximum recoverable strain of 2% in Ni50.7Ti29.3Hf20. With increasing Ni content, the size (>100 nm) and volume fraction of precipitates increased and the growth of martensite plates was constrained between the precipitates when the Ni concentration was greater than 50.7 at.%. Near perfect dimensional stability with negligible irrecoverable strain was observed at stress levels as high as 2 GPa in the Ni52Ti28Hf20 alloy, though the recoverable strain was rather small. In general, strong local stress fields were created at precipitate/matrix interphases, which lead to high stored elastic energy during the martensitic transformation.

  20. Heavy metal environmental impact. Nickel (Ni); Impatto ambientale da metalli pesanti. Il Nichel (Ni)

    Energy Technology Data Exchange (ETDEWEB)

    Bressa, G. [Padua Univ. Padua (Italy). Dipt. di Farmacologia, Lab. di Tossicologia

    2001-02-01

    Nickel (Ni) is a heavy metal in over 3.000 different alloys used to produce kitchen utensils, batteries, coins, etc.. Human extractive and industrial activities are therefore a cause for environmental dispersion of this metal into the biosphere. This shows how in urban areas car traffic and house-heating are the main sources of nickel pollution. Nickel is relatively non-toxic, such as iron, cobalt, copper and zinc; nevertheless prolonged inhalation of dust containing such compounds as Ni O or NiCl{sub 2} concurs in the outbreak of respiratory pathologies. The carcinogenic effect of such compounds as Ni S, Ni O and Ni(CO){sub 4} has been confirmed by experiments on laboratory animals. Ni potentially toxic concentrations, and as a consequence of potential environmental impact, are to be mainly found in populated areas where the main sources are represented by industries and landfills. [Italian] Il nichel (Ni) e' un metallo presente in oltre 3.000 differenti leghe che vengono utilizzate per la produzione di utensili da cucina, batterie, monete, ecc.. Le attivita' estrattive ed industriali dell'uomo sono quindi causa di una dispersione del metallo nella biosfera. Sono stati riscontrati elevati tassi di Ni nell'atmosfera di aree urbane. Cio' sta a dimostrare che nelle aree urbane il traffico automobilistico e il riscaldamento domestico sono le fonti principali di inquinamento da tale metallo. Il nichel e' relativamente atossico, analogamente a ferro, cobalto, rame e zinco, tuttavia l'inalazione protratta di polveri contenenti composti come il NiO o il NiCl{sub 2} contribuisce al manifestarsi di patologie dell'apparato respiratorio. E' stato confermato sperimentalmente su animali da laboratorio l'effetto cancerogeno di alcuni composti quali NiS, NiO e Ni(CO){sub 4}. Concentrazioni potenzialmente tossiche di Ni, e quindi di probabile impatto ambientale, sono maggiormente da ricercare nelle zone antropizzate dove le fonti

  1. Improvement of Ni phytostabilization by inoculation of Ni resistant Bacillus megaterium SR28C.

    Science.gov (United States)

    Rajkumar, Mani; Ma, Ying; Freitas, Helena

    2013-10-15

    The use of metal tolerant plants for the phytostabilization of metal contaminated soil is an area of extensive research and development. In this study the effects of inoculation of Ni-resistant bacterial strains on phytostabilization potential of various plants, including Brassica juncea, Luffa cylindrica and Sorghum halepense, were studied. A Ni-resistant bacterial strain SR28C was isolated from a nickel rich serpentine soil and identified as Bacillus megaterium based on the morphological features, biochemical characteristics and partial 16S rDNA sequence analysis. The strain SR28C tolerated concentrations up to 1200 mg Ni L(-1) on a Luria-Bertani (LB) agar medium. Besides, it showed high degree of resistance to various metals (Cu, Zn, Cd, Pb and Cr) and antibiotics (ampicillin, tetracycline, streptomycin, chloramphenicol, penicillin and kanamycin) tested. In addition, the strain bound considerable amounts of Ni in their resting cells. Besides, the strain exhibited the plant growth promoting traits, such as solubilization of phosphate and production of indole-3-acetic acid (IAA) in modified Pikovskayas medium and LB medium, respectively in the absence and presence of Ni. Considering such potential, the effects of SR28C on the growth and Ni accumulation of B. juncea, L. cylindrica and S. halepense, were assessed with different concentrations of Ni in soil. Inoculation of SR28C stimulated the biomass of the test plants grown in both Ni contaminated and non-contaminated soils. Further, SR28C alleviated the detrimental effects of Ni by reducing its uptake and translocation to the plants. This study suggested that the PGPB inoculant due to its intrinsic abilities of growth promotion and attenuation of the toxic effects of Ni could be exploited for phytostabilization of Ni contaminated site.

  2. Electroless Ni-P/Ni-B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance

    Energy Technology Data Exchange (ETDEWEB)

    Narayanan, T.S.N. Sankara; Krishnaveni, K.; Seshadri, S.K

    2003-12-20

    The present work deals with the formation of Ni-P/Ni-B duplex coatings by electroless plating process and evaluation of their hardness, wear resistance and corrosion resistance. The Ni-P/Ni-B duplex coatings were prepared using dual baths (acidic hypophosphite- and alkaline borohydride-reduced electroless nickel baths) with both Ni-P and Ni-B as inner layers and with varying single layer thickness. Scanning electron microscopy (SEM) was used to assess the duplex interface. The microhardness, wear resistance and corrosion resistance of electroless nickel duplex coatings were compared with electroless Ni-P and Ni-B coatings of similar thickness. The study reveals that the Ni-P and Ni-B coatings are amorphous in their as-plated condition and upon heat-treatment at 450 deg. C for 1 h, both Ni-P and Ni-B coatings crystallize and produce nickel, nickel phosphide and nickel borides in the respective coatings. All the three phases are formed when Ni-P/Ni-B and Ni-B/Ni-P duplex coatings are heat-treated at 450 deg. C for 1 h. The duplex coatings are uniform and the compatibility between the layers is good. The microhardness, wear resistance and corrosion resistance of the duplex coating is higher than Ni-P and Ni-B coatings of similar thickness. Among the two types of duplex coatings studied, hardness and wear resistance is higher for coatings having Ni-B coating as the outer layer whereas better corrosion resistance is offered by coatings having Ni-P coating as the outer layer.

  3. Dissolution and Interfacial Reactions of (Cu,Ni)6Sn5 Intermetallic Compound in Molten Sn-Cu-Ni Solders

    Science.gov (United States)

    Wang, Chao-hong; Lai, Wei-han; Chen, Sinn-wen

    2014-01-01

    (Cu,Ni)6Sn5 is an important intermetallic compound (IMC) in lead-free Sn-Ag-Cu solder joints on Ni substrate. The formation, growth, and microstructural evolution of (Cu,Ni)6Sn5 are closely correlated with the concentrations of Cu and Ni in the solder. This study reports the interfacial behaviors of (Cu,Ni)6Sn5 IMC (Sn-31 at.%Cu-24 at.%Ni) with various Sn-Cu, Sn-Ni, and Sn-Cu-Ni solders at 250°C. The (Cu,Ni)6Sn5 substrate remained intact for Sn-0.7 wt.%Cu solder. When the Cu concentration was decreased to 0.3 wt.%, (Cu,Ni)6Sn5 significantly dissolved into the molten solder. Moreover, (Cu,Ni)6Sn5 dissolution and (Ni,Cu)3Sn4 formation occurred simultaneously for the Sn-0.1 wt.%Ni solder. In Sn-0.5 wt.%Cu-0.2 wt.%Ni solder, many tiny (Cu,Ni)6Sn5 particulates were formed and dispersed in the solder matrix, while in Sn-0.3 wt.%Cu-0.2 wt.%Ni a lot of (Ni,Cu)3Sn4 grains were produced. Based on the local equilibrium hypothesis, these results are further discussed based on the liquid-(Cu, Ni)6Sn5-(Ni,Cu)3Sn4 tie-triangle, and the liquid apex is suggested to be very close to Sn-0.4 wt.%Cu-0.2 wt.%Ni.

  4. The Influence of Sintering Temperature in NiO Target on the Properties of Exchange Coupling NiO/Ni81Fe19 Double-Layered Films%NiO靶烧结温度对NiO/Ni81Fe19双层膜的影响

    Institute of Scientific and Technical Information of China (English)

    胡用时; 邱进军; 李佐宜; 刘兴阶

    2000-01-01

    在不同的温度下烧结制备NiO靶,用射频磁控溅射法淀积NiO/Ni81Fe19双层膜,研究了不同的温度烧结NiO靶对NiO/NiFe双层膜特性的影响,结果表明,使用不同的烧结温度制备的NiO靶溅射所得的NiO膜中Ni的化学价态及其含量不同,进而影响NiO/Ni81Fe19双层膜的磁滞回线的矩形度及层间交换耦合作用.

  5. Synthesis and characterizations of Ni-NiO nanoparticles on PDDA-modified graphene for oxygen reduction reaction.

    Science.gov (United States)

    Yung, Tung-Yuan; Huang, Li-Ying; Chan, Tzu-Yi; Wang, Kuan-Syun; Liu, Ting-Yu; Chen, Po-Tuan; Chao, Chi-Yang; Liu, Ling-Kang

    2014-01-01

    We are presenting our recent research results about the Ni-NiO nanoparticles on poly-(diallyldimethylammonium chloride)-modified graphene sheet (Ni-NiO/PDDA-G) nanocomposites prepared by the hydrothermal method at 90°C for 24 h. The Ni-NiO nanoparticles on PDDA-modified graphene sheets are measured by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), and selected area electron diffraction (SAED) pattern for exploring the structural evidence to apply in the electrochemical catalysts. The size of Ni-NiO nanoparticles is around 5 nm based on TEM observations. The X-ray diffraction (XRD) results show the Ni in the (012), (110), (110), (200), and (220) crystalline orientations, respectively. Moreover, the crystalline peaks of NiO are found in (111) and (220). The thermal gravimetric analysis (TGA) result represents the loading content of the Ni metal which is about 34.82 wt%. The electron spectroscopy for chemical analysis/X-ray photoelectron spectroscopy (ESCA/XPS) reveals the Ni(0) to Ni(II) ratio in metal phase. The electrochemical studies with Ni-NiO/PDDA-G in 0.5 M aqueous H2SO4 were studied for oxygen reduction reaction (ORR).

  6. Impacts of Two Types of El Niño and La Niña Events on Typhoon Activity

    Directory of Open Access Journals (Sweden)

    Po-Chun Hsu

    2013-01-01

    Full Text Available The HadISST (Hadley Centre Sea Ice and Sea Surface Temperature dataset is used to define the years of El Niño, El Niño Modoki, and La Niña events and to find out the impacts of these events on typhoon activity. The results show that the formation positions of typhoon are farther eastward moving in El Niño years than in La Niña years and much further eastward in El Niño Modoki years. The lifetime and the distance of movement are longer, and the intensity of typhoons is stronger in El Niño and in El Niño Modoki years than in La Niña years. The Accumulated Cyclone Energy of typhoon is highly correlated with the Oceanic Niño Index with a correlation coefficient of 0.79. We also find that the typhoons anomalously decrease during El Niño years but increase during El Niño Modoki years. Besides, there are two types of El Niño Modoki, I and II. The intensity of typhoon in El Niño Modoki I years is stronger than in El Niño Modoki II years. Furthermore, the centroid position of the Western Pacific Warm Pool is strongly related to the area of typhoon formation with a correlation coefficient of 0.95.

  7. Synthesis and characterizations of Ni-NiO nanoparticles on PDDA-modified graphene for oxygen reduction reaction

    Science.gov (United States)

    Yung, Tung-Yuan; Huang, Li-Ying; Chan, Tzu-Yi; Wang, Kuan-Syun; Liu, Ting-Yu; Chen, Po-Tuan; Chao, Chi-Yang; Liu, Ling-Kang

    2014-08-01

    We are presenting our recent research results about the Ni-NiO nanoparticles on poly-(diallyldimethylammonium chloride)-modified graphene sheet (Ni-NiO/PDDA-G) nanocomposites prepared by the hydrothermal method at 90°C for 24 h. The Ni-NiO nanoparticles on PDDA-modified graphene sheets are measured by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), and selected area electron diffraction (SAED) pattern for exploring the structural evidence to apply in the electrochemical catalysts. The size of Ni-NiO nanoparticles is around 5 nm based on TEM observations. The X-ray diffraction (XRD) results show the Ni in the (012), (110), (110), (200), and (220) crystalline orientations, respectively. Moreover, the crystalline peaks of NiO are found in (111) and (220). The thermal gravimetric analysis (TGA) result represents the loading content of the Ni metal which is about 34.82 wt%. The electron spectroscopy for chemical analysis/X-ray photoelectron spectroscopy (ESCA/XPS) reveals the Ni0 to NiII ratio in metal phase. The electrochemical studies with Ni-NiO/PDDA-G in 0.5 M aqueous H2SO4 were studied for oxygen reduction reaction (ORR).

  8. Microstructure and mechanical properties of sputter deposited Ni/Ni{sub 3}Al multilayer films at elevated temperature

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Chao [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai 200240 (China); Feng, Kai, E-mail: fengkai@sjtu.edu.cn [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai 200240 (China); Li, Zhuguo, E-mail: lizg@sjtu.edu.cn [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai 200240 (China); Lu, Fenggui; Huang, Jian; Wu, Yixiong [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai 200240 (China)

    2016-08-15

    Highlights: • Ni/Ni{sub 3}Al multilayers are prepared by magnetron sputtering. • Both grain size and phase constitution of annealed Ni/Ni{sub 3}Al multilayers are dependent on individual layer thickness. • The hardness of annealed Ni/Ni{sub 3}Al multilayers varies with individual layer thickness and annealing temperature. • 40 nm Ni/Ni{sub 3}Al multilayer exhibits excellent hardness at elevated temperature. - Abstract: Nano-structured Ni/Ni{sub 3}Al multilayer was prepared by magnetron sputtering, with individual layer thicknesses h varying from 10 to 160 nm. The microstructure and hardness of Ni/Ni{sub 3}Al multilayer were investigated by X-ray diffraction, transmission electron microscopy and nanoindentation. The results show that the hardness increases with decreasing h for as-deposited and 500 °C annealed multilayers. When annealed at 700 °C, the hardness approach a peak value at h = 40 nm with followed by softening at smaller h. The influence of individual layer thickness, grain size as well as formation of ordered Ni{sub 3}Al on strengthening mechanisms of Ni/Ni{sub 3}Al multilayers at elevated temperature are discussed.

  9. Fracture of FeNiB-NiP amorphous bilayer ribbon

    NARCIS (Netherlands)

    Miskuf, J; Csach, K; Ocelik, [No Value; Duhaj, P; Ocelik, Vaclav

    1997-01-01

    The Study of failure surfaces of amorphous bimetal ribbons Fe40Ni40B20-Ni82P18 failed during tensile testing in the as-quenched and relaxed states (anneaIed at 250 degrees C) is presented. Two different fracture morphologies are observed on failed as-quenched samples: (i) near the maximum shear

  10. Enhanced Electrocatalytic Activity for Water Splitting on NiO/Ni/Carbon Fiber Paper

    Directory of Open Access Journals (Sweden)

    Ruoyu Zhang

    2016-12-01

    Full Text Available Large-scale growth of low-cost, efficient, and durable non-noble metal-based electrocatalysts for water splitting is crucial for future renewable energy systems. Atomic layer deposition (ALD provides a promising route for depositing uniform thin coatings of electrocatalysts, which are useful in many technologies, including the splitting of water. In this communication, we report the growth of a NiO/Ni catalyst directly on carbon fiber paper by atomic layer deposition and report subsequent reduction and oxidation annealing treatments. The 10–20 nm NiO/Ni nanoparticle catalysts can reach a current density of 10 mA·cm−2 at an overpotential of 189 mV for hydrogen evolution reactions and 257 mV for oxygen evolution reactions with high stability. We further successfully achieved a water splitting current density of 10 mA·cm−2 at 1.78 V using a typical NiO/Ni coated carbon fiber paper two-electrode setup. The results suggest that nanoparticulate NiO/Ni is an active, stable, and noble-metal-free electrocatalyst, which facilitates a method for future water splitting applications.

  11. Investigation on microstructures of NiO-YSZ composite and Ni-YSZ cermet for SOFCs

    Energy Technology Data Exchange (ETDEWEB)

    Talebi, Tahereh; Sarrafi, Mohammad Hassan; Haji, Mohsen; Raissi, Babak; Maghsoudipour, Amir [Materials and Energy Research Center, Karaj, Tehran 14155-4777 (Iran)

    2010-09-15

    NiO-YSZ composites and Ni-YSZ cermets were successfully performed for solid oxide fuel cell applications. These composites must have enough porosity and appropriate microstructure for transferring the fuel gases. In this study, ball-milling was used as a simple, cost-effective method for the purpose of mixing the raw materials. The homogeneity of NiO-YSZ composites was examined by Map mode of SEM. NiO-YSZ composites were reduced at the high temperature under the controlled atmosphere to fabricate Ni-YSZ cermet. Variations in the anode phases were investigated by XRD and microstructure and porosity of composites were observed by SEM. Effective parameters like temperatures and the amount of pore former were investigated on open porosity, bulk density, electrical conductivity as well as electrochemical impedance of NiO-YSZ composites and Ni-YSZ cermet. A thin layer of YSZ was deposited by EPD as an electrolyte on NiO-YSZ composites which had various amount of open porosity, to study its effect on the performance of semi-cells by electrochemical impedance. (author)

  12. Phase equilibria in the Gd-Ni binary and Mg-Ni-Gd ternary systems

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Guanglong; Fei, Houjun [Central South Univ., Hunan (China). School of Materials Science and Engineering; Cui, Yu-Wen [Madrid Institute for Advanced Studies of Materials, Madrid (Spain); Zhang, Ligang [Central South Univ., Hunan (China). School of Materials Science and Engineering; Freiberg Univ. of Mining and Technology (Germany). Centre for Innovation Competence; Zheng, Feng; Liu, Libin; Jin, Zhanpeng [Central South Univ., Hunan (China). School of Materials Science and Engineering; Scientific Center of Phase Diagram and Materials Design and Preparation, Hunan (China)

    2012-10-15

    Phase equilibria of the Gd-Ni binary and Mg-Ni-Gd ternary systems were critically investigated using equilibrated alloys and differential scanning calorimeter measurements. The phase diagram of the Gd-Ni binary system was updated from scanning electron microscopy with energy-dispersive X-ray spectrometry, X-ray diffraction, and differential scanning calorimeter results obtained on binary samples over the entire composition range. Major changes made in the present work include the absence of the Gd{sub 3}Ni{sub 2} and GdNi{sub 4} compounds and the congruent melting point of the GdNi compound. An isothermal section of the Mg-Ni-Gd ternary system at 673K was constructed from the investigations on 22 ternary alloys. In total, six ternary compounds were identified in this work, three of which were observed to crystallize in the Cu{sub 4}MgSn ({tau}1), Mo{sub 2}FeB{sub 2} ({tau}2), and Ru{sub 4}Al{sub 3}B{sub 2}-type ({tau}3) structures, respectively. As in most of the Mg-rare-earth metal-transition metal ternary systems, a long-period-stacking ordered phase was identified to have an 18R structure and a melting temperature of 806K. Noticeable solid solubility of Ni in the Mg{sub 5}Gd and Mg{sub 3}Gd binary compounds was observed.

  13. Reduction mechanism of Ni2+ into Ni nanoparticles prepared from different precursors: Magnetic studies

    Indian Academy of Sciences (India)

    R S Ningthoujam; N S Gajbhiye; Sachil Sharma

    2009-03-01

    The reduction mechanism of Ni2+ into Ni particles using different precursors such as NiCl2 solution, NiO powder and Ni[(NH3)6]Cl2 complex has been established. Different particle sizes can be designed from these precursors. The smallest crystallite size (12 nm) can be obtained from Ni[(NH3)6]Cl2 complex in the presence of the stabilizing ligand (oleic acid). The field-cooled (FC) and zero-field-cooled (ZFC) magnetization of Ni particles obtained from Ni[(NH3)6]Cl2 complex in the temperature range 5–300 K established the ferromagnetic interaction up to 300 K. The magnetization values at three different temperatures 5, 70 and 300 K are 50.2, 49.5 and 45.5 Oe respectively at 3 × 104 Oe applied field and such values are less than that of the bulk value. The Curie temperature (c) decreases slightly with the decrease of particle size. This study will provide guidance in the preparation of metal nanoparticles from different precursors.

  14. Combustion Synthesis of NiAl and In-situ Joining to Ni-based Superalloy

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Combustion synthesis is used as a joining technology to join Ni-based superalloys with in-situ synthesized NiAl filler. The synthesis mechanism is discussed. The microstructure of the joints is investigated and the joint strength is also evaluated by tensile testing.

  15. Electronic circuits having NiAl and Ni.sub.3 Al substrates

    Energy Technology Data Exchange (ETDEWEB)

    Deevi, Seetharama C. (Midlothian, VA); Sikka, Vinod K. (Oak Ridge, TN)

    1999-01-01

    An electronic circuit component having improved mechanical properties and thermal conductivity comprises NiAl and/or Ni.sub.3 Al, upon which an alumina layer is formed prior to applying the conductive elements. Additional layers of copper-aluminum alloy or copper further improve mechanical strength and thermal conductivity.

  16. Electronic circuits having NiAl and Ni{sub 3}Al substrates

    Energy Technology Data Exchange (ETDEWEB)

    Deevi, S.C.; Sikka, V.K.

    1999-10-12

    An electronic circuit component having improved mechanical properties and thermal conductivity comprises NiAl and/or Ni{sub 3}Al, upon which an alumina layer is formed prior to applying the conductive elements. Additional layers of copper-aluminum alloy or copper further improve mechanical strength and thermal conductivity.

  17. Electronic circuits having NiAl and Ni.sub.3 Al substrates

    Science.gov (United States)

    Deevi, Seetharama C.; Sikka, Vinod K.

    1999-01-01

    An electronic circuit component having improved mechanical properties and thermal conductivity comprises NiAl and/or Ni.sub.3 Al, upon which an alumina layer is formed prior to applying the conductive elements. Additional layers of copper-aluminum alloy or copper further improve mechanical strength and thermal conductivity.

  18. Ni(salen): a system that forms many solvates with interacting Ni atoms

    NARCIS (Netherlands)

    Siegler, M.A.M.; Lutz, M.

    2009-01-01

    Recrystallization of [N,N’-Ethylene-bis(salicylideneiminato)]-nickel(II) [Ni(salen)] has been carried out from a large selection of solvents. Crystals can be either solvent free or solvates. This study is based on X-ray crystal structure determinations, which include the redetermination of Ni(salen)

  19. Fabrication of Ni-,Co-and NiCo-coated Graphite Microspheres by Heterogeneous Precipitation

    Institute of Scientific and Technical Information of China (English)

    ZHOU Jianxin; SHEN Xiangqian; CHEN Dong

    2009-01-01

    The precursors with NiCO_3·2Ni(OH)_2·2H2_O,Co_2(OH)_2CO_3,or both NiCO_3·2Ni(OH)_2·2H_2O and Co_2(OH)-2CO_3 coated graphite microspheres were prepared respectively by the aqueous heterogeneous precipitation using nickel sulfate,cobalt nitrate,sodium carbonate, ammonium bicarbonate and graphite microspheres as the main starting materials.Subsequently,Ni-, Co-and NiCo-coated graphite microspheres were successfully obtained by thermal reduction of the as-prepared precursors at 500℃for 2 h,respectively.These metal-coated graphite microspheres were characterized with a smooth,cohesive surface consisting of fine metallic particles.Optimized precipitation processing parameters of the concentration of graphite microspheres(10 g/L),the rate of adding reactants(3 mL/min)and pH value(8.0)were determined by a trial and error method.The thermal analysis of the precursors was investigated by TG.Powders of the precursors and the resultant metal-(Ni,Co and NiCo alloy)coated graphite microspheres were characterized by scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS)and X-ray diffraction(XRD).

  20. Fracture of FeNiB-NiP amorphous bilayer ribbon

    NARCIS (Netherlands)

    Miskuf, J; Csach, K; Ocelik, [No Value; Duhaj, P; Ocelik, Vaclav

    1997-01-01

    The Study of failure surfaces of amorphous bimetal ribbons Fe40Ni40B20-Ni82P18 failed during tensile testing in the as-quenched and relaxed states (anneaIed at 250 degrees C) is presented. Two different fracture morphologies are observed on failed as-quenched samples: (i) near the maximum shear stre

  1. Materials science of Mg-Ni-based new hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Orimo, S.; Fujii, H. [Hiroshima Univ. (Japan). Faculty of Integrated Arts and Sciences

    2001-02-01

    One of the advantageous functional properties of Mg alloys (or compounds) is to exhibit the reversible hydriding reaction. In this paper, we present our systematic studies regarding the relationship between nanometer- or atomistic-scale structures and the specific hydriding properties of the Mg-Ni binary system, such as(1) nanostructured (n)-Mg{sub 2}Ni, (2) a mixture of n-Mg{sub 2}Ni and amorphous (a)-MgNi,(3) pure a-MgNi, and(4) n-MgNi{sub 2}. Further studies on(5) an a-MgNi-based system for clarifying the effect of the short-range ordering on the structural and hydriding properties and(6) a MgNi{sub 2}-based system for synthesizing the new Laves phase structure are also presented. The materials science of Mg-Ni-based new hydrides will provide indispensable knowledge for practically developing the Mg alloys as hydrogen-storage materials. (orig.)

  2. Probing the semi-magicity of $^{68}$Ni via the $^{3}$H($^{66}$Ni,$^{68}$Ni)p two-neutron transfer reaction in inverse kinematics

    CERN Multimedia

    Reiter, P; Blazhev, A A; Kruecken, R; Franchoo, S; Mertzimekis, T; Darby, I G; Van de walle, J; Raabe, R; Elseviers, J; Gernhaeuser, R A; Sorlin, O H; Georgiev, G P; Bree, N C F; Habs, D; Chapman, R; Gaudefroy, L; Diriken, J V J; Jenkins, D G; Kroell, T; Axiotis, M; Huyse, M L; Patronis, N

    We propose to perform the two-neutron transfer reaction $^{3}$H($^{66}$Ni, $^{68}$Ni)$p$ using the ISOLDE radioactive ion beam at 2.7 $A$ MeV and the MINIBALL + T-REX setup to characterize the 0$^{+}$ and 2$^{+}$ states in $^{68}$Ni.

  3. Hydride reactivity of Ni(II)-X-Ni(II) entities: mixed-valent hydrido complexes and reversible metal reduction.

    Science.gov (United States)

    Gehring, Henrike; Metzinger, Ramona; Herwig, Christian; Intemann, Julia; Harder, Sjoerd; Limberg, Christian

    2013-01-28

    After the lithiation of PYR-H(2) (PYR(2-) =[{NC(Me)C(H)C(Me)NC(6)H(3)(iPr)(2)}(2)(C(5)H(3)N)](2-)), which is the precursor of an expanded β-diketiminato ligand system with two binding pockets, its reaction with [NiBr(2) (dme)] led to a dinuclear nickel(II)-bromide complex, [(PYR)Ni(μ-Br)NiBr] (1). The bridging bromide ligand could be selectively exchanged for a thiolate ligand to yield [(PYR)Ni(μ-SEt)NiBr] (3). In an attempt to introduce hydride ligands, both compounds were treated with KHBEt(3). This treatment afforded [(PYR)Ni(μ-H)Ni] (2), which is a mixed valent Ni(I)-μ-H-Ni(II) complex, and [(PYR-H)Ni(μ-SEt)Ni] (4), in which two tricoordinated Ni(I) moieties are strongly antiferromagnetically coupled. Compound 4 is the product of an initial salt metathesis, followed by an intramolecular redox process that separates the original hydride ligand into two electrons, which reduce the metal centres, and a proton, which is trapped by one of the binding pockets, thereby converting it into an olefin ligand on one of the Ni(I) centres. The addition of a mild acid to complex 4 leads to the elimination of H(2) and the formation of a Ni(II)Ni(II) compound, [(PYR)Ni(μ-SEt)NiOTf] (5), so that the original Ni(II) (μ-SEt)Ni(II) X core of compound 3 is restored. All of these compounds were fully characterized, including by X-ray diffraction, and their molecular structures, as well as their formation processes, are discussed.

  4. Effect of NiO content on corrosion behaviour of Ni-xNiO-NiFe2O4 cermets in Na3AlF6-Al2O3 melts

    Institute of Scientific and Technical Information of China (English)

    李劼; 段华南; 赖延清; 田忠良; 刘业翔

    2004-01-01

    5Ni-xNiO-NiFe2O4 cermets with different NiO contents were prepared and the corrosion behaviour in Na3 AlF6-Al2O3 melts was investigated in laboratory electrolysis tests. The results indicate that adding NiO is unfavorable to the densification of NiFe2O4-xNiO ceramics, while small Ni doping can greatly improve the sintering property. The electrolysis tests show that excess NiO is beneficial to the reduction of Fe while has little effects on that of Ni in the bath; the steady-state concentrations of Ni, Fe are below the corresponding solubilities of NiFe2O4-xNiO, implying that corrosion mechanism changes while electrifying. Post-electrolysis examination of anodes shows that Ni metal leaches at the anode surface, yet the substrate ceramic prevents the penetration of bath and the further loss of metal phase.

  5. Ni(OH){sub 2} and NiO nano structures: Synthesis, characterization and electrochemical performance

    Energy Technology Data Exchange (ETDEWEB)

    Saghatforoush, Lotf Ali; Sanati, Soheila; Mehdizadeh, Robabeh [Payam Noor Univ., Tehran (Iran, Islamic Republic of); Hasanzadeh, Mohammad [Tabriz Univ. of Medical Sciences, Tabriz (Iran, Islamic Republic of)

    2012-04-15

    Hydrothermal route have been used in different conditions for preparation of Ni(OH){sub 2} nano structures. The NiO nanoparticles were obtained by calcining the Ni(OH){sub 2} precursor at 450 .deg. C for 2 h. The effect of sodium dodecyl sulfonate (SDS) as surfactant on the morphology and size of Ni(OH){sub 2} nanoparticles were discussed in detail. X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR) spectroscopy were used to characterize the products. The growth mechanism of the as-synthesized nano structures was also discussed in detail based on the experimental results. Coming up, the NiO nanoparticle modified carbon paste electrode was applied to the determination of captopril in aqueous solution.

  6. Exchange coupling and noncollinear magnetic states in Ni/Fen/Ni(1 0 0) multilayers

    Science.gov (United States)

    Malonda-Boungou, B. R.; Stojić, N.; Binggeli, N.; M'Passi-Mabiala, B.

    2015-01-01

    The Ni interlayer exchange coupling (IEC) and the atomic-scale magnetic configurations in fcc Ni /Fen /Ni (1 0 0) multilayers, with ultrathin Fe spacers, are investigated using first-principles density-functional theory including the noncollinear spin formalism. The trends with changing Fe thickness (n) between 3 and 5 monolayers (MLs) are examined. For n = 3 and 4 MLs, we find the ground state to display antiferromagnetic IEC between the Ni films, while for the 5-ML Fe spacer, the IEC changes into ferromagnetic. Upon reversal of the magnetization alignment, from antiparallel to parallel, between the Ni films with 3- and 4-ML thick Fe spacer, we find noncollinear magnetic configurations in the Fe layer as the lowest-energy states, which are related to the magnetic instability towards noncollinear solutions in bulk γ -Fe.

  7. Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2014-01-01

    Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe

  8. Magnetoresistance of nanogranular Ni/NiO controlled by exchange anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    Del Bianco, L., E-mail: lucia.delbianco@unibo.it [Dipartimento di Fisica e Astronomia, Università di Bologna, I-40127 Bologna (Italy); Spizzo, F.; Tamisari, M. [Dipartimento di Fisica e Scienze della Terra, Università di Ferrara, I-44122 Ferrara (Italy); Allia, P. [Dipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino, I-10129 Torino (Italy)

    2013-08-15

    A link between exchange anisotropy and magnetoresistance has been found to occur in a Ni/NiO sample consisting of Ni nanocrystallites (mean size ∼13 nm, Ni content ∼33 vol%) dispersed in a NiO matrix. This material shows metallic-type electric conduction and isotropic spin-dependent magnetoresistance as well as exchange bias effect. The latter is the outcome of an exchange anisotropy arising from the contact interaction between the Ni phase and the NiO matrix. Combined analysis of magnetization M(H) and magnetoresistance MR(H) loops measured in the 5–250 K temperature range after zero-field-cooling (ZFC) and after field-cooling (FC) from 300 K reveals that the magnetoresistance is influenced by exchange anisotropy, which is triggered by the FC process and can be modified in strength by varying the temperature. Compared to the ZFC case, the exchange anisotropy produces a horizontal shift of the FC MR(H) loop along with a reduction of the MR response associated to the reorientation of the Ni moments. A strict connection between magnetoresistance and remanent magnetization of FC loops on one side and the exchange field on the other, ruled by exchange anisotropy, is indicated. - Highlights: • Nanogranular Ni/NiO with giant magnetoresistance (MR) and exchange bias effect. • Exchange anisotropy produces a shift of the field-cooled MR(H) loop and reduces MR. • MR, remanence of field-cooled loops and exchange field are three correlated quantities. • It is possible to control MR of nanogranular systems through the exchange anisotropy.

  9. Oxide Scales Formed on NiTi and NiPtTi Shape Memory Alloys

    Science.gov (United States)

    Smialek, James L.; Garg, Anita; Rogers, Richard B.; Noebe, Ronald D.

    2011-01-01

    Ni-49Ti and Ni-30Pt-50Ti (at.%) shape memory alloys were oxidized isothermally in air over the temperature range of 500 to 900 C. The microstructure, composition, and phase content of the scales were studied by SEM, EDS, XRD, and metallography. Extensive plan view SEM/EDS identified various features of intact or spalled scale surfaces. The outer surface of the scale was a relatively pure TiO2 rutile structure, typified by a distinct highly striated and faceted crystal morphology. Crystal size increased significantly with temperature. Spalled regions exhibited some porosity and less distinct features. More detailed information was obtained by correlation of SEM/EDS studies of 700 C/100 hr cross-sections with XRD analyses of serial or taper-polishing of plan surfaces. Overall, multiple layers exhibited graded mixtures of NiO, TiO2, NiTiO3, Ni(Ti) or Pt(Ni,Ti) metal dispersoids, Ni3Ti or Pt3Ti depletion zones, and substrate, in that order. The NiTi alloy contained a 3 at.% Fe impurity that appeared in embedded localized Fe-Ti-rich oxides, while the NiPtTi alloy contained a 2 v/o dispersion of TiC that appeared in lower layers. The oxidation kinetics of both alloys (in a previous report) indicated parabolic growth and an activation energy (250 kJ/mole) near those reported in other Ti and NiTi studies. This is generally consistent with TiO2 existing as the primary scale constituent, as described here.

  10. Exchange bias effect in polycrystalline NiO/NiMn{sub 2}O{sub 4} composite

    Energy Technology Data Exchange (ETDEWEB)

    Freitas Cabral, A.J. [Instituto de Ciências Exatas e Naturais, Universidade Federal do Pará (UFPA), Belém, PA (Brazil); Peña Serna, J.; Rache Salles, B.; Novak, M.A. [Instituto de Física, Universidade Federal do Rio de janeiro (UFRJ), Rio de Janeiro, RJ (Brazil); Pinto, A.L. [Centro Brasileiro de Pesquisas Físicas (CBPF), Rio de Janeiro, RJ (Brazil); Rocha Remédios, C.M. [Instituto de Ciências Exatas e Naturais, Universidade Federal do Pará (UFPA), Belém, PA (Brazil)

    2015-05-05

    Highlights: • Antiferromagnetic NiO/ferrimagnetic NiMn{sub 2}O{sub 4} oxide composites. • Grains are well faceted, indicating that the specimen was well crystallized. • The micrographs suggests that NiO and NiMn{sub 2}O{sub 4} may be stuck to each other. • EB effect in NiO/NiMn{sub 2}O{sub 4} oxide composites. • EB effect increases with the amount of NiO. - Abstract: Calcination of aqueous solutions formed by different molar ratios between the nickel and manganese chlorides led to the formation of antiferromagnetic NiO/ferrimagnetic NiMn{sub 2}O{sub 4} oxide composites, as determined by X-ray powder diffraction technique and Rietveld refinement. Low temperature zero field cooled and field cooled magnetic hysteresis cycles show an exchange bias effect, presumably due to interaction at the interfaces between the antiferromagnetic and ferrimagnetic materials.

  11. Low-lying excitations in 72Ni

    Science.gov (United States)

    Morales, A. I.; Benzoni, G.; Watanabe, H.; Nishimura, S.; Browne, F.; Daido, R.; Doornenbal, P.; Fang, Y.; Lorusso, G.; Patel, Z.; Rice, S.; Sinclair, L.; Söderström, P.-A.; Sumikama, T.; Wu, J.; Xu, Z. Y.; Yagi, A.; Yokoyama, R.; Baba, H.; Avigo, R.; Bello Garrote, F. L.; Blasi, N.; Bracco, A.; Camera, F.; Ceruti, S.; Crespi, F. C. L.; de Angelis, G.; Delattre, M.-C.; Dombradi, Zs.; Gottardo, A.; Isobe, T.; Kojouharov, I.; Kurz, N.; Kuti, I.; Matsui, K.; Melon, B.; Mengoni, D.; Miyazaki, T.; Modamio-Hoyborg, V.; Momiyama, S.; Napoli, D. R.; Niikura, M.; Orlandi, R.; Sakurai, H.; Sahin, E.; Sohler, D.; Shaffner, H.; Taniuchi, R.; Taprogge, J.; Vajta, Zs.; Valiente-Dobón, J. J.; Wieland, O.; Yalcinkaya, M.

    2016-03-01

    Low-lying excited states in 72Ni have been investigated in an in-flight fission experiment at the RIBF facility of the RIKEN Nishina Center. The combination of the state-of-the-art BigRIPS and EURICA setups has allowed for a very accurate study of the β decay from 72Co to 72Ni, and has provided first experimental information on the decay sequence 72Fe→72Co→72Ni and on the delayed neutron-emission branch 73Co→72Ni . Accordingly, we report nearly 60 previously unobserved γ transitions which deexcite 21 new levels in 72Ni. Evidence for the location of the so-sought-after (42+) ,(62+) , and (81+) seniority states is provided. As well, the existence of a low-spin β -decaying isomer in odd-odd neutron-rich Co isotopes is confirmed for mass A =72 . The new experimental information is compared to simple shell-model calculations including only neutron excitations across the f p g shells. It is shown that, in general, the calculations reproduce well the observed states.

  12. Evolution of Ni nanofilaments and electromagnetic coupling in the resistive switching of NiO

    Science.gov (United States)

    Luo, Yuxiang; Zhao, Diyang; Zhao, Yonggang; Chiang, Fu-Kuo; Chen, Pengcheng; Guo, Minghua; Luo, Nannan; Jiang, Xingli; Miao, Peixian; Sun, Ying; Chen, Aitian; Lin, Zhu; Li, Jianqi; Duan, Wenhui; Cai, Jianwang; Wang, Yayu

    2014-12-01

    Resistive switching effect in conductor/insulator/conductor thin-film stacks is promising for resistance random access memory with high-density, fast speed, low power dissipation and high endurance, as well as novel computer logic architectures. NiO is a model system for the resistive switching effect and the formation/rupture of Ni nanofilaments is considered to be essential. However, it is not clear how the nanofilaments evolve in the switching process. Moreover, since Ni nanofilaments should be ferromagnetic, it provides an opportunity to explore the electromagnetic coupling in this system. Here, we report a direct observation of Ni nanofilaments and their specific evolution process for the first time by a combination of various measurements and theoretical calculations. We found that multi-nanofilaments are involved in the low resistance state and the nanofilaments become thin and rupture separately in the RESET process with subsequent increase of the rupture gaps. Theoretical calculations reveal the role of oxygen vacancy amount in the evolution of Ni nanofilaments. We also demonstrate electromagnetic coupling in this system, which opens a new avenue for multifunctional devices.Resistive switching effect in conductor/insulator/conductor thin-film stacks is promising for resistance random access memory with high-density, fast speed, low power dissipation and high endurance, as well as novel computer logic architectures. NiO is a model system for the resistive switching effect and the formation/rupture of Ni nanofilaments is considered to be essential. However, it is not clear how the nanofilaments evolve in the switching process. Moreover, since Ni nanofilaments should be ferromagnetic, it provides an opportunity to explore the electromagnetic coupling in this system. Here, we report a direct observation of Ni nanofilaments and their specific evolution process for the first time by a combination of various measurements and theoretical calculations. We found

  13. Exchange bias beyond the superparamagnetic blocking temperature of the antiferromagnet in a Ni-NiO nanoparticulate system

    Energy Technology Data Exchange (ETDEWEB)

    Roy, Aparna, E-mail: aparna.roy@ua.pt, E-mail: aparnaroy15@gmail.com; Ferreira, J. M. F. [Department of Materials and Ceramics Engineering and CICECO, University of Aveiro, 3810-193 Aveiro (Portugal); De Toro, J. A.; Muniz, P.; Riveiro, J. M. [Departamento de Fisica Aplicada, Universidad de Castilla-La Mancha, 13071 Ciudad Real (Spain); Amaral, V. S. [Department of Physics and CICECO, University of Aveiro, 3810-193 Aveiro (Portugal)

    2014-02-21

    We report magnetic and exchange bias studies on Ni-NiO nanoparticulate systems synthesized by a two-step process, namely, chemical reduction of a Ni salt followed by air annealing of the dried precipitate in the temperature range 400–550 °C. Size of Ni and NiO crystallites as estimated from X–ray diffraction line broadening ranges between 10.5–13.5 nm and 2.3–4 nm, respectively. The magneto-thermal plots (M-T) of these bi-magnetic samples show a well developed peak in the vicinity of 130 K. This has been identified as the superparamagnetic blocking temperature “T{sub B}” of NiO. Interestingly, all samples exhibit exchange bias even above their respective NiO blocking temperatures, right up to 300 K, the maximum temperature of measurement. This is in contrast to previous reports since exchange bias requires the antiferromagnetic NiO to have a stable direction of its moment in order to pin the ferromagnet (Ni) magnetization, whereas such stability is unlikely above T{sub B} since the NiO is superparamagnetic, its moment flipping under thermal activation. Our observation is elucidated by taking into account the core-shell morphology of the Ni-NiO nanoparticles whereby clustering of some of these nanoparticles connects their NiO shells to form extended continuous regions of NiO, which because of their large size remain blocked at T > T{sub B}, with thermally stable spins capable of pinning the Ni cores and giving rise to exchange bias. The investigated samples may thus be envisaged as being constituted of both isolated core-shell Ni-NiO nanoparticles as well as clustered ones, with T{sub B} denoting the blocking temperature of the NiO shell of the isolated particles.

  14. Optimization of the Ni(P) Thickness for an Ultrathin Ni(P)-Based Surface Finish in Soldering Applications

    Science.gov (United States)

    Ho, C. E.; Wang, S. J.; Fan, C. W.; Wu, W. H.

    2014-01-01

    The effects of the Ni(P) thickness δ Ni(P) on the interfacial reaction between an Sn-3Ag-0.5Cu solder and an Au/Pd(P)/Ni(P)/Cu pad (thickness: 0.05/0.05/0.1-0.3/20 μm) and the resulting mechanical properties were investigated using scanning electron microscopy equipped with an electron backscatter diffraction system, a focused ion beam system, electron probe microanalysis, and high-speed ball shear (HSBS) testing. Regardless of δ Ni(P), all of the Au/Pd(P)/Ni(P) surface finishes examined were completely exhausted in one reflow, exposing the Cu pad underneath the solder. Cu6Sn5 dissolved with various Ni contents, termed (Cu,Ni)6Sn5, was the dominant intermetallic compound (IMC) species at the solder/Cu interface. Additionally, Ni2SnP and Ni3P IMCs might form with the (Cu,Ni)6Sn5 in the thick Ni(P) case, i.e., δ Ni(P) = 0.3 μm, and the two IMCs (Ni2SnP and Ni3P) were gradually eliminated from the interface after multiple reflows. A mass balance analysis indicated that the growth of the Ni-containing IMCs, rather than the dissolution of the metallization pad, played a key role in the Ni(P) exhaustion. The HSBS test results indicated that the mechanical strength of the solder joints was also δ Ni(P) dependent. The combined results of the interfacial reaction and the mechanical evaluation provided the optimal δ Ni(P) value for soldering applications.

  15. Enhanced cycle performance of a Na/NiCl2 battery based on Ni particles encapsulated with Ni3S2 layer

    Science.gov (United States)

    Ao, Xin; Wen, Zhaoyin; Hu, Yingying; Wu, Tian; Wu, Xiangwei; He, Qiming

    2017-02-01

    Nickel particles with different contents of Ni3S2 surface layer were prepared for their application as cathode materials in Na/NiCl2 batteries. The surface modification of nickel particles is found to prevent their growth and battery degradation during cycling. The optimum level of surface modification was determined by electrochemical tests and morphology characterization. Excessive Ni3S2 layer seems to cause particle aggregation resulting in low reversible capacity. The capacity of the cell with optimum level of Ni3S2 surface modification layer after 50 cycles is about 4 times greater than that without Ni3S2 surface modification layer.

  16. Effect of silicon on oxidation of Ni-15Al alloy

    Institute of Scientific and Technical Information of China (English)

    WU Ying; NIU Yan; WU Wei-tao

    2005-01-01

    The oxidation of binary Ni-Al alloy containing 15% (mole fraction, the same below if not mentioned)Al (Ni-15Al), and of a ternary alloy with the same Al content but also containing 4% Si (Ni-4Si-15Al) has been studied at 1 000 ℃ under 1.0× 105Pa O2 to examine the effect of the addition of Si on the oxidation of Ni-15Al. Oxidation of Ni-15Al produces a duplex scale composed of an outer NiO layer and an inner layer riched in Al2O3. On the contrary, Ni-4Si-15Al forms an external alumina layer directly in contact with the alloy presenting only trace of NiO and the Ni-Al spinel. As a result, the kinetics of Ni-15Al shows a fast initial stage followed by two subsequent parabolic stages with decreasing rate constants, while Ni-4Si-15Al presents essentially a single nearly-parabolic behavior with a rate constant similar to that of the final stage of Ni-15Al. Therefore, the addition of 4% Si significantly reduces the oxidation rate during the initial stage by preventing the formation of Ni-riched scales and promoting an earlier development of an exclusive external alumina layer on the alloy surface.

  17. The acceleration intermediate phase (NiS and Ni3S2) evolution by nanocrystallization in Li/NiS2 thermal batteries with high specific capacity

    Science.gov (United States)

    Jin, Chuanyu; Zhou, Lingping; Fu, Licai; Zhu, Jiajun; Li, Deyi; Yang, Wulin

    2017-06-01

    The intermediate phase of NiS2 is thought to be a bottleneck currently to improve the overall performance of Li/NiS2 thermal batteries because of its low conductivity and close formation enthalpy between NiS2 and the intermediate phase (NiS, Ni3S2, etc). For improving the discharge performances of Li/NiS2 thermal batteries, the nano NiS2 with an average size of 85 ± 5 nm is designated as a cathode material. The electrochemical measurements show that the specific capacity of nano NiS2 cathode is higher than micro NiS2. The nano NiS2 cathode exhibits excellent electrochemical performances with high specific capacities of 794 and 654 mAh g-1 at current density of 0.1 and 0.5 A cm-2 under a cut-off voltage of 0.5 V, respectively. These results show that the rapid intermediate phase evolution from the nanocrystallization can obviously enhance use efficiency of NiS2 and improve discharge performances of thermal batteries.

  18. Cutting NiTi with Femtosecond Laser

    Directory of Open Access Journals (Sweden)

    L. Quintino

    2013-01-01

    Full Text Available Superelastic shape memory alloys are difficult to machine by thermal processes due to the facility for Ti oxidation and by mechanical processes due to their superelastic behavior. In this study, femtosecond lasers were tested to analyze the potential for machining NiTi since femtosecond lasers allow nonthermal processing of materials by ablation. The effect of processing parameters on machining depth was studied, and material removal rates were computed. Surfaces produced were analyzed under SEM which shows a resolidified thin layer with minimal heat affected zones. However, for high cutting speeds, that is, for short interaction times, this layer was not observed. A depletion of Ni was seen which may be beneficial in biomedical applications since Ni is known to produce human tissue reactions in biophysical environments.

  19. La niña proletaria

    Directory of Open Access Journals (Sweden)

    Cartabia, Sabrina A.

    2011-12-01

    Full Text Available El presente trabajo se propone trazar un paralelo entre el cuento de Osvaldo Lamborghini “El niño proletario”, el cual, según la autora del ensayo, introduce al lector en la lucha de clases y el sometimiento de los/as proletarios/as, que sufren las mujeres, en particular a través de la violencia sexual. De esa forma la autora se pregunta si el poder que ciertas clases detentan sobre otras no influye también sobre el sometimiento de la mujer. El ensayo analiza además cómo la violencia sexual es una herramienta que constituye la base de la desigualdad, el sometimiento y la degradación de la mujer, al igual que constituye una herramienta de opresión de otros grupos vulnerables como los niños y niñas.

  20. De niño a niño, un programa de niños tutores en alfabetización

    OpenAIRE

    Rosemberg, Celia Renata; Alam, Florencia

    2015-01-01

    El programa "De niño a niño: un programa de niños tutores en alfabetización" (Rosemberg y Alam, 2009- en curso) tiene por objeto promover simultáneamente el desarrollo lingüístico y cognitivo de niños de 4 y 5 años y niños de 12 y 13 años a través de la realización de actividades de alfabetización y de la lectura de cuentos de los niños mayores a los pequeños. En talleres semanales los coordinadores pedagógicos y miembros del equipo de investigación capacitan a los niños mayores para llevar a...

  1. Radiation damage buildup and dislocation evolution in Ni and equiatomic multicomponent Ni-based alloys

    Science.gov (United States)

    Levo, E.; Granberg, F.; Fridlund, C.; Nordlund, K.; Djurabekova, F.

    2017-07-01

    Single-phase multicomponent alloys of equal atomic concentrations (;equiatomic;) have proven to exhibit promising mechanical and corrosion resistance properties, that are sought after in materials intended for use in hazardous environments like next-generation nuclear reactors. In this article, we investigate the damage production and dislocation mobility by simulating irradiation of elemental Ni and the alloys NiCo, NiCoCr, NiCoFe and NiFe, to assess the effect of elemental composition. We compare the defect production and the evolution of dislocation networks in the simulation cells of two different sizes, for all five studied materials. We find that the trends in defect evolution are in good agreement between the different cell sizes. The damage is generally reduced with increased alloy complexity, and the dislocation evolution is specific to each material, depending on its complexity. We show that increasing complexity of the alloys does not always lead to decreased susceptibility to damage accumulation under irradiation. We show that, for instance, the NiCo alloy behaves very similarly to Ni, while presence of Fe or Cr in the alloy even as a third component reduces the saturated level of damage substantially. Moreover, we linked the defect evolution with the dislocation transformations in the alloys. Sudden drops in defect number and large defect fluctuations from the continuous irradiation can be explained from the dislocation activity.

  2. Application of Nanocrystalline LaNi5-type Hydrogen Absorbing Alloys in Ni-MHx Batteries

    Institute of Scientific and Technical Information of China (English)

    Jurczyk M; Nowak M

    2004-01-01

    The structure and electrochemical properties of nanocrystalline LaNi5-type alloys were studied. These materials were prepared by mechanical alloying (MA) followed by annealing. The properties of hydrogen host materials can be modified substantially by alloying to obtain the desired storage characteristics. It was found that the partial substitution of Ni by Al or Mn in LaNi5-xMx alloy leads to an increase in discharge capacity. The alloying elements such as Al, Mn and Co greatly improved the cycle life of LaNi5 material. For example, in the nanocrystalline LaNi3.75Mn0.75Al0.25Co0.25 powder, discharge capacity up to 258 mAh·g-1 was measured (at 40 mA·g-1 discharge current). Furthermore,the effect of the graphite coating on the structure of some nanocrystalline alloys and the electrodes characteristics were investigated. The mechanical coating with graphite effectively reduced the degradation rate of the studied electrode materials. The combination of a nanocrystalline LaNi5-type hydride electrodes and a nickel positive electrode to form a Ni-MH battery, was successful.

  3. Easy access to Ni3N- and Ni-carbon nanocomposite catalysts.

    Science.gov (United States)

    Clavel, Guylhaine; Molinari, Valerio; Kraupner, Alexander; Giordano, Cristina

    2014-07-14

    In the search for alternative materials to current expensive catalysts, Ni has been addressed as one of the most promising and, on this trail, its corresponding nitride. However, nickel nitride is a thermally unstable compound, and therefore not easy to prepare especially as nanoparticles. In the present work, a sol-gel-based process (the urea glass route) is applied to prepare well-defined and homogeneous Ni3N and Ni nanoparticles. In both cases, the prepared crystalline nanoparticles (∼25 nm) are dispersed in a carbon matrix forming interesting Ni3N- and Ni-based composites. These nanocomposites were characterised by means of several techniques, such as XRD, HR-TEM, EELS, and the reaction mechanism was investigated by TGA and IR and herein discussed. The catalytic activity of Ni3N is investigated for the first time, to the best of our knowledge, for hydrogenation reactions involving H2, and here compared to the one of Ni. Both materials show good catalytic activities but, interestingly, give a different selectivity between different functional groups (namely, nitro, alkene and nitrile groups).

  4. Atomistic structure of the coherent Ni/Ni[sub 3]Al interface

    Energy Technology Data Exchange (ETDEWEB)

    Farkas, D. (Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States). Dept. of Materials Science and Engineering); Campos, M.F. de; Souze, R.M. de; Goldenstein, H. (Escola Politecnica USP, Sao Paulo (Brazil). Dept. de Metalurgia)

    1994-02-01

    Most Ni-based superalloys are strengthened by the presence of coherent precipitates of an ordered fcc bases phase, known as [gamma][prime]. This phase is basically Ni[sub 3]Al. The precipitates are coherent up to a certain size and they present a cubic shape with faces oriented in the (100) planes of both matrix and precipitate. The detailed atomistic structure of this interface has not been studied. Interest in the use of ordered intermetallic compounds as possible structural materials has resulted in a large amount of work in Ni[sub 3]Al and in particular, the development of interatomic potentials for the Ni-Al system using the embedded atom technique. These potentials have been employed in the simulation of a variety of defects in Ni[sub 3]Al, including dislocation cores, grain boundaries and free surfaces. However, there is no simulation of the Ni/Ni[sub 3]Al interface structure using the embedded atom method. The objective of the present work is to carry out such a simulation. Besides the practical importance of the interface in superalloys, it is the simplest type of interface that can be modeled and it is a good starting point for interface work using the embedded atom technique.

  5. PRECIPITATION HARDENING IN B2-ORDERED NiAl BY Ni2AlTiCOMPOUND

    Institute of Scientific and Technical Information of China (English)

    W.H. Tian; K. Ohishi; M. Nemoto

    2001-01-01

    Microstructural variations and correlated hardness changes in B2-ordered NiAl containing fine precipitation of Ni2AlTi have been investigated by means of transmission electron microscopy (TEM) and hardness tests. The amount of age hardening is not large as compared to the large microstructural variations during aging. TEM observations have revealed that the L21-type Ni2AlTi precipitates keep a lattice coherency with the NiAl matrix at the beginning of aging. By longer periods of aging Ni2AlTi precipitates lose their coherency and change their morphology to the globular ones surrounded by misfit dislocations. The temperature dependence of the yield strength of precipitate-containing B2-ordered NiAl was investigated by compression tests over the temperature range of 873-1273K. The fine precipitation of Ni2AlTi was found to enhance greatly the yield strength and the high-temperature strength is comparison with that of superalloy Mar-M200.``

  6. Zn,Ni ferrite/NiO nanocomposite powder obtained from acetylacetonato complexes

    Science.gov (United States)

    Vucinic-Vasic, M.; Antic, B.; Kremenovic, A.; Nikolic, A. S.; Stoiljkovic, M.; Bibic, N.; Spasojevic, V.; Colomban, Ph

    2006-10-01

    The results on the synthesis, microstructure, structure and DC magnetization studies of nanocomposite Zn,Ni ferrite/NiO powder obtained by thermal decomposition of acetylacetonato complexes are reported in this paper. According to the results obtained by inductively coupled plasma optical emission spectroscopy (ICP-OES) element analysis and multiphase Rietveld refinement, the three samples made are composed of spinel-ferrite (86.7% 96.7%) and NiO (3.3% 13.3%) phases. The compositions of the spinel-ferrite (SP) phase in the investigated samples, S1 S3, are Zn0.72Ni0.24Fe1.98O4, Zn0.56Ni0.29Fe2.07O4 and Zn0.40Ni0.40Fe2.10O4, respectively. Due to the cation deficiency in spinels, created vacancies induce a partial change in the cation valence, \\mathrm {Ni^{2+}} \\to \\mathrm {Ni^{3+}} . The vacancy distribution is found to be random at 8a and 16d cation sites, except in sample S3, where all vacancies are over octahedral sites. The x-ray line broadening due to crystallite size effect is found to be isotropic for all spinels, while the x-ray line broadening due to the strain effect is anisotropic. A correlation between the Zn2+ occupancy of the tetrahedral site and the 650 cm-1 Raman peak intensities is shown. The observed coercivity decrease and shift in hysteresis loop in the samples are caused by the interaction between spinel and NiO phase. The results of M(H) measurements point to the properties of an ensemble of interacting nanoparticles. High saturation magnetization values and superparamagnetic behaviour at room temperature point to the technological significance of the title compounds.

  7. Fe-Ni-O体系中Fe/Ni的还原行为%Reduction behavior of Fe/Ni in the Fe-Ni-O system

    Institute of Scientific and Technical Information of China (English)

    魏文洁; 张延玲; 魏芬绒; 杨小刚; 胡晓军

    2013-01-01

    取电阻炉实验和热重分析等手段,探讨了Fe-Ni-O体系中不同条件下的产物组成及Fe/Ni的还原行为.结果表明:五种样品的还原难度由低到高依次为NiO<Fe2O3+Ni<Fe2O3+NiO<NiFe2O4 <Fe2O3; Ni元素能够促进铁氧化物还原,其促进作用由Ni元素的初始状态决定,单质Ni>氧化物NiO>NiFe2O4中的Ni;NiFe2O4的还原过程中各产物由低温到高温依次出现的次序为Fe3O4、Ni、(Fe,Ni)、Fe和Fe0.64Ni0.36.根据实验结果,对五种氧化物体系的还原过程进行了探讨,并获得了活化能、控速环节等重要参数及相关反应机理.%The product composition under different conditions and the reduction behavior of Fe and Ni in the Fe-Ni-O system were studied by electric resistance furnace experiments and thermogravimetric analysis. The order of difficult degree for reducing Fe/Ni oxides in five systems is NiONiO>Ni released from NiFe2O4. As the temperature increases, the reduction products of NiFe2O4 are in order of Fe3O4, Ni, (Fe, Ni), Fe, and Fe0.64Ni0.36- Based on these experimental results, the reduction processes and the kinetics such as activation energy and rate-controlling step for reducing the five oxides were analyzed and discussed.

  8. Participar como niña o niño en el mundo social

    OpenAIRE

    Silvia Paulina Díaz

    2010-01-01

    En este artículo presento la participación como resultado de un trabajo investigativo realizado durante el año 2007, con niños y niñas escolarizados habitantes de la ciudad de Medellín, Colombia, cuyo objetivo fue analizar las representaciones sociales que ellos y ellas comparten sobre el ejercicio ciudadano. El análisis de la información tiene como ejes fundamentales, la salud colectiva, la sociología de la infancia y la participación en la niñez, en una aproximación que se realiza desde un ...

  9. Synthesis of TiNi/Ti2Ni Composite Particles in Molten Salts

    Institute of Scientific and Technical Information of China (English)

    YANG Rui-song; CUI Li-shan; ZHENG Yan-jun

    2006-01-01

    A new process of synthesizing TiNi/Ti2Ni composite particles, high temperature molten salts method, is introduced. This method uses molten salts as a reaction medium that does not take part in the chemical reaction and can be easily dissolved in rinsing water. According this method, the composite particles were prepared in molten salts at 700 ℃-900 ℃. By means of differential scanning calorimetry (DSC), the reversible martensitic transformation of TiNi particles in these composite particles was confirmed.

  10. IMPURITY CENTRES.Ni+ and Ni3+ centers in X-irradiated CaF2

    OpenAIRE

    Casas, J.; Den Hartog, H.; Alcalá, R

    1980-01-01

    Optical and EPR measurements of CaF2 : Ni before and after X-irradiation are reported. An absorption band at 255 nm grows during X-irradiation. The thermal evolution of this band and some bleaching experiments in 15 K X-irradiated samples containing Vk centers indicate that the 255 nm band is due to Ni+ centers. Some EPR signals associated with the Ni+ centers are also observed. Low temperature measurements show that there are two slightly different kinds of centers one of them having tetrago...

  11. Exchange bias in finite sized NiO nanoparticles with Ni clusters

    Science.gov (United States)

    Gandhi, Ashish Chhaganlal; Lin, Jauyn Grace

    2017-02-01

    Structural and magnetic properties of finite sized NiO nanoparticles are investigated with synchrotron X-ray diffraction (XRD), transmission electron microscopy, magnetometer and ferromagnetic resonance (FMR) spectroscopy. A minor Ni phase is detected with synchrotron XRD, attributed to the oxygen defects in the NiO core. A considerable exchange bias of 100 Oe is observed at 50 K and it drops abruptly and vanishes above 150 K, in association with the reduction of frozen spins. FMR data indicate a strong interaction between ferromagnetic (FM) and antiferromagnetic (AFM) phases below 150 K, consistent with the picture of isolated FM clusters in AFM matrix.

  12. Microstructure of Ni-Al powder and Ni-Al composite coatings prepared by twin-wire arc spraying

    Institute of Scientific and Technical Information of China (English)

    Ji-xiao Wang; Gui-xian Wang; Jing-shun Liu; Lun-yong Zhang; Wei Wang; Ze Li; Qi-xiang Wang; Jian-fei Sun

    2016-01-01

    Ni–Al powder and Ni–Al composite coatings were fabricated by twin-wire arc spraying (TWAS). The microstructures of Ni-5wt%Al powder and Ni-20wt%Al powder were characterized by scanning electronic microscopy (SEM) and energy dispersive spec-troscopy (EDS). The results showed that the obtained particle size ranged from 5 to 50μm. The morphology of the Ni–Al powder showed that molten particles were composed of Ni solid solution, NiAl, Ni3Al, Al2O3, and NiO. The Ni–Al phase and a small amount of Al2O3 parti-cles changed the composition of the coating. The microstructures of the twin-wire-arc-sprayed Ni–Al composite coatings were characterized by SEM, EDS, X-ray diffraction (XRD), and transmission electron microscopy (TEM). The results showed that the main phase of the Ni-5wt%Al coating consisted of Ni solid solution and NiAl in addition to a small amount of Al2O3. The main phase of the Ni-20wt%Al coating mainly consisted of Ni solid solution, NiAl, and Ni3Al in addition to a small amount of Al and Al2O3, and NiAl and Ni3Al intermet-allic compounds effectively further improved the final wear property of the coatings. TEM analysis indicated that fine spherical NiAl3 pre-cipitates and a Ni–Al–O amorphous phase formed in the matrix of the Ni solid solution in the original state.

  13. Interface structure between epitaxial NiSi2 and Si

    Institute of Scientific and Technical Information of China (English)

    Wei-Long Liu; Wen-Jauh Chen; Ting-Kan Tsai; Hsun-Heng Tsai; Shu-Huei Hsieh

    2006-01-01

    The interface structure between the Si and NiSi2 epitaxially grown on the ((-1)12) Si substrate was studied using high resolution transmission electron microscopy and computer image simulation. The results showed that the interface between Si and NiSi2 epitaxially grown on the ((-1)12) Si substrate has six different types: type A NiSi2 ((-1)11 )/( (-1)11 ) Si, type A NiSi2 (001)/(001) Si, type B NiSi2 (1(-1)(-1))/(1(-1)1) Si, type B NiSi2 ((-1)12)/(1(-1)2) Si, type B NiSi2 (2(-2)1)/(001) Si, and type B NiSi2 (1(-1)(4))/( 1(-1)0 ) Si. And there are one or more different atomic structures for one type of interface.

  14. Electrochemical performance study of Ni/Ni-GDC double-layer anode-supported IT-SOFC%Ni/Ni-GDC双层阳极支撑型IT-SOFC性能研究

    Institute of Scientific and Technical Information of China (English)

    郭桂平; 彭开萍

    2015-01-01

    采用硝酸盐-柠檬酸溶胶-凝胶低温自蔓延燃烧法制备GDC粉末,用共压法制备了NiO-GDC单层阳极、NiO/NiO-GDC双层阳极及其单电池,并测试了其性能。研究结果表明:经H2还原后,Ni/Ni-GDC双层阳极外层为多孔结构,由粒径较大的Ni粒子团形成了稳定的电子电导通道及燃料通道;内层孔隙较小、较少,Ni均匀分布于GDC构成的支撑骨架中。Ni/Ni-GDC双层阳极的孔隙率及电导率都高于Ni-GDC单层阳极,从450~700℃,其电导率比Ni-GDC单层阳极都稳定高出15%~20%。单电池的测试结果表明:Ni/Ni-GDC双层阳极支撑单电池在700、650、600℃的最大功率密度分别为0.383、0.329、0.204 W/cm2,比Ni-GDC单层阳极支撑单电池分别高出了8.95%、79.38%、84.76%。Ni/Ni-GDC双层阳极支撑单电池具有比Ni-GDC单层阳极支撑单电池更高的中温、特别是低温电化学性能。%GDC electrolyte powder was synthesized by nitrate-citric acid sol-gel auto combustion method in low temperature. NiO-GDC single-layer anode, NiO/NiO-GDC double-layer anode and their single cells were prepared by co-pressing, then their properties were tested. The test results show that after reduction by H2, the outer layer of the Ni/Ni-GDC double-layer anode is porous and stable electronic conductivity channel and fuel channel is formed by the Ni particle groups with large size. In the inner layer, pores are less and smal er, and Ni particles distribute uniformly in the skeleton structure formed by GDC particle. Both the porosity and conductivity of Ni/Ni-GDC double-layer anode are higher than Ni-GDC single-layer anode; its conductivities from 450 to 700℃are al 15%~20%higher than Ni-GDC single-layer anode. The single celltest shows that the peak power densities of Ni/Ni-GDC double-layer anode-supported single cellat temperature 700, 650 and 600℃are respectively 0.383, 0.329 and 0.204 W/cm2, which are respectively 8.95%, 79.38%, 84

  15. Funciones cognoscitivas en niños y niñas con trastorno disocial comparados con niños y niñas sin el trastorno

    OpenAIRE

    Urazán Torres, Gina Rocio

    2011-01-01

    Este proyecto de investigación tuvo como objetivo evaluar y caracterizar las funciones cognoscitivas de un grupo de niños y niñas con Trastorno Disocial (TD), comparándolas con las de un grupo de niños y niñas normales. Se utilizó un diseño de casos y controles con una muestra de 39 niños y niñas entre 6 y 12 años de edad con TD y 39 niños y niñas del mismo rango de edades y los mismos estratos socioeconómicos. Los participantes fueron seleccionados de diferentes instituciones educativas de B...

  16. Fabrication of CdTe/NiTe films on Ni foils by radio-frequency magnetron sputtering method

    Energy Technology Data Exchange (ETDEWEB)

    Mu, Yannan [National Key Lab of Superhard Materials, Jilin University, Changchun 130012 (China); Department of Physics and Chemistry, Heihe University, Heihe 164300 (China); Zhou, Xiaoming [College of Physics, Beihua University, Jilin 132013 (China); Yao, Huizhen; Su, Shi; Lv, Pin; Chen, Yanli; Wang, Jun; Fu, Wuyou [National Key Lab of Superhard Materials, Jilin University, Changchun 130012 (China); Song, Wenxu [College of Electrical and Information Engineering, Beihua University, Jilin 132013 (China); Yang, Haibin, E-mail: yanghb@jlu.edu.cn [National Key Lab of Superhard Materials, Jilin University, Changchun 130012 (China)

    2015-04-25

    Highlights: • The effects of T{sub s} on CdTe deposited on Ni by magnetron sputtering is investigated. • An effective method is studied of making CdTe/NiTe without post-treatment. • As-prepared CdTe/NiTe raised optical absorption and PEC properties. • Pre-deposited Te can react with Ni to generate NiTe at T{sub s} = 350 °C. - Abstract: Cadmium Telluride (CdTe) semiconductor thin films are fabricated on flexible Ni foil substrates using radio-frequency (RF) magnetron sputtering under different substrate temperatures. The crystal structure and properties of the prepared functional thin films were characterized with series analysis technologies. The characterization results revealed that Nickel Telluride (NiTe) phase formatted at the interface of CdTe and Ni substrate when substrate temperature (T{sub s}) is 450 °C. Specially, XRD results demonstrated that CdTe/NiTe films could also be obtained by pre-depositing Te film on Ni and reducing T{sub s} to 350 °C. The investigation on optical and photoelectrochemical (PEC) properties of the products illustrated that compact CdTe/NiTe films had improved the absorption in the visible region. Furthermore, PEC measurements indicated that CdTe/NiTe/Ni photoelectrode can have a promising application in photovoltaic devices.

  17. Hydrogenation of ethyl acetate to ethanol over Ni-based catalysts obtained from Ni/Al hydrotalcite-like compounds.

    Science.gov (United States)

    Zhang, Beixiao; Lin, Lu; Zhuang, Junping; Liu, Ying; Peng, Lincai; Jiang, Longfei

    2010-07-29

    A series of Ni-based catalysts were prepared using hydrogen reduction of Ni/Al hydrotalcite-like compounds (Ni/Al HTlcs) synthesized by coprecipitation. The physico-chemical properties of Ni/Al hydrotalcite-like compounds and the corresponding Ni-based catalysts were characterized using inductively coupled plasma (ICP), BET surface areas, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) techniques. The results indicated that Ni/Al HTlcs with layered structures could be successfully prepared by the coprecipitation method, and the characteristic HTlcs reflections were also observed in the XRD analysis. The NiO and Ni0 phases were identified in all Ni-based catalysts, which displayed randomly interconnected pores and no layer structures. In addition, the studies also found the Ni/Al HTlcs and Ni-based catalysts had high specific surface areas, low pore volumes and low pore diameters. The catalytic hydrogenation of ethyl acetate to ethanol with Ni-based catalysts was also investigated. Among the studied catalysts, RE1NASH-110-3 showed the highest selectivity and yield of ethyl acetate to ethanol, which were 68.2% and 61.7%, respectively. At the same time, a major by-product, butyl acetate, was formed due to an ester-exchange reaction. A proposed hydrogenation pathway for ethyl acetate over Ni-based catalysts was suggested.

  18. Hydrogenation of Ethyl Acetate to Ethanol over Ni-Based Catalysts Obtained from Ni/Al Hydrotalcite-Like Compounds

    Directory of Open Access Journals (Sweden)

    Longfei Jiang

    2010-07-01

    Full Text Available A series of Ni-based catalysts were prepared using hydrogen reduction of Ni/Al hydrotalcite-like compounds (Ni/Al HTlcs synthesized by coprecipitation. The physico-chemical properties of Ni/Al hydrotalcite-like compounds and the corresponding Ni-based catalysts were characterized using inductively coupled plasma (ICP, BET surface areas, X-ray diffraction (XRD, Fourier transform infrared (FTIR spectroscopy and scanning electron microscopy (SEM techniques. The results indicated that Ni/Al HTlcs with layered structures could be successfully prepared by the coprecipitation method, and the characteristic HTlcs reflections were also observed in the XRD analysis. The NiO and Ni0 phases were identified in all Ni-based catalysts, which displayed randomly interconnected pores and no layer structures. In addition, the studies also found the Ni/Al HTlcs and Ni-based catalysts had high specific surface areas, low pore volumes and low pore diameters. The catalytic hydrogenation of ethyl acetate to ethanol with Ni-based catalysts was also investigated. Among the studied catalysts, RE1NASH-110-3 showed the highest selectivity and yield of ethyl acetate to ethanol, which were 68.2% and 61.7%, respectively. At the same time, a major by-product, butyl acetate, was formed due to an ester-exchange reaction. A proposed hydrogenation pathway for ethyl acetate over Ni-based catalysts was suggested.

  19. A Comparative Study of Elastic Constants of NiTi and NiAl Alloys from First-Principle Calculations

    Institute of Scientific and Technical Information of China (English)

    Jianmin Lu; Qingmiao Hu; Rui Yang

    2009-01-01

    To investigate the origin of the strong dependence of martensitic transformation temperature on composition,the elastic properties of high temperature B2 phases of both NiTi and NiAl were calculated by a first-principle method, the exact-muffin orbital method within coherent potential approximation. In the composition range of 50-56 at. pct Ni of NiTi and 60-70 at. pct Ni of NiAI in which martensitic transformation occurs, non-basalplane shear modulus c44 increases with increasing Ni content, while basal-plane shear modulus c' decreases.In the above composition ranges however the transformation temperature of NiAI increases with increasing Ni content while that of NiTi decreases from experimental observation. The softening of c' is experimentally observed only in NiAl, and the decrease of c' with increasing Ni content is responsible for the increase of transformation temperature. The result of the present work demonstrates that, besides c', c44 also influences the martensitic transformation of NiTi and plays quite important a role.

  20. Structural study of radiolytic catalysts Ni-Ce/Al2O3 and Ni-Pt/Al2O3

    Science.gov (United States)

    Seridi, F.; Chettibi, S.; Keghouche, N.; Beaunier, P.; Belloni, J.

    2017-01-01

    Ni-Ce and Ni-Pt bimetallic catalysts supported over α-Al2O3 are synthesized by using co-impregnation method, and then reduced, each via radiolytic process or thermal H2-treatment. For Ni-Ce/Al2O3, the structural study reveals that Ce is alloyed with Ni as Ce2Ni7 nanoparticles in the radiation-reduced catalysts, while it segregates to the surface in the form of CeO2 in the H2-reduced catalysts. For Ni-Pt/Al2O3 radiolytic catalysts, Ni, Pt, NiPt and Ni3Pt nanoparticles, which size is 3.5 nm, are observed. When the radiation-reduced samples are tested in the benzene hydrogenation, they both display high conversion rate. However, the Ni-Pt/Al2O3 is more efficient than Ni-Ce/Al2O3. The performance of the catalysts is correlated with the high dispersion of the metal and the presence of intermetallic Ni-Pt and Ni-Ce phases. It is compared to that of other radiolytic monometallic/oxide catalysts of the literature.

  1. Anomalous self-reduction of layered double hydroxide (LDH): from α-Ni(OH)2 to hexagonal close packing (HCP) Ni/NiO by annealing without a reductant.

    Science.gov (United States)

    Ge, X; Gu, C D; Wang, X L; Tu, J P

    2015-01-21

    The traditional concept that nickel layered double hydroxide (Ni LDH, also known as α-Ni(OH)2) converts to NiO after annealing has been taken without doubt and utilized to fabricate NiO for years. This work reports that an anomalous self-reduction phenomenon can occur for Ni LDH synthesized from an ionic liquid system.

  2. NiO Nanofibers as a Candidate for a Nanophotocathode

    Directory of Open Access Journals (Sweden)

    Thomas J. Macdonald

    2014-04-01

    Full Text Available p-type NiO nanofibers have been synthesized from a simple electrospinning and sintering procedure. For the first time, p-type nanofibers have been electrospun onto a conductive fluorine doped tin oxide (FTO surface. The properties of the NiO nanofibers have been directly compared to that of bulk NiO nanopowder. We have observed a p-type photocurrent for a NiO photocathode fabricated on an FTO substrate.

  3. Development of the dentistry alloy Ni-Cr-Nb; Desenvolvimento de ligas odontologicas Ni-Cr-Nb

    Energy Technology Data Exchange (ETDEWEB)

    Souza, M.A.; Ramos, A.S.; Hashimoto, T.M., E-mail: mari_sou@hotmail.co [UNESP/FEG, Guaratingueta, SP (Brazil). Fac. de Engenharia. Dept. de Materiais e Tecnologia

    2010-07-01

    This work reports on the structural characterization of Ni-Cr-Mo and Ni-Cr-Nb alloys produced by arc melting. Samples were characterized by means of optical microscopy, X-ray diffraction, scanning electron microscopy, and EDS analysis. Results indicated that the arc melting process was efficient to produce homogeneous structures in Ni-Cr-Mo and Ni-Cr-Nb alloys. The nickel dissolved large amounts of Cr, Mo and Nb, which was detected by EDS analysis and X-ray diffraction. The alloy containing molybdenum indicated the presence of structure based on Ni{sub SS}, while that the alloys containing niobium presented primary grains of Ni{sub SS} and precipitates formed by the simultaneous transformation of the Ni and Ni{sub 3}Nb phases. (author)

  4. Nickel recovery from electronic waste II electrodeposition of Ni and Ni-Fe alloys from diluted sulfate solutions.

    Science.gov (United States)

    Robotin, B; Ispas, A; Coman, V; Bund, A; Ilea, P

    2013-11-01

    This study focuses on the electrodeposition of Ni and Ni-Fe alloys from synthetic solutions similar to those obtained by the dissolution of electron gun (an electrical component of cathode ray tubes) waste. The influence of various parameters (pH, electrolyte composition, Ni(2+)/Fe(2+) ratio, current density) on the electrodeposition process was investigated. Scanning electron microscopy (SEM) and X-ray fluorescence analysis (XRFA) were used to provide information about the obtained deposits' thickness, morphology, and elemental composition. By controlling the experimental parameters, the composition of the Ni-Fe alloys can be tailored towards specific applications. Complementarily, the differences in the nucleation mechanisms for Ni, Fe and Ni-Fe deposition from sulfate solutions have been evaluated and discussed using cyclic voltammetry and potential step chronoamperometry. The obtained results suggest a progressive nucleation mechanism for Ni, while for Fe and Ni-Fe, the obtained data points are best fitted to an instantaneous nucleation model.

  5. Epitaxial fabrication of two-dimensional NiSe2 on Ni(111) substrate

    Science.gov (United States)

    Shao, Yan; Song, Shiru; Wu, Xu; Qi, Jing; Lu, Hongliang; Liu, Chen; Zhu, Shiyu; Liu, Zhongliu; Wang, Jiaou; Shi, Dongxia; Du, Shixuan; Wang, Yeliang; Gao, H.-J.

    2017-09-01

    Two-dimensional (2D) transition metal dichalcogenides (TMDs) receive significant attention due to their intriguing physical properties for both fundamental research and potential applications in electronics, optoelectronics, and catalysis. A high-quality 2D film of NiSe2, a TMD material, is grown epitaxially by a single step direct selenization of a Ni(111) substrate. X-ray photoemission spectroscopy, low-energy electron diffraction, scanning tunneling microscopy, and density functional theory calculations are combined to confirm the formation and structure of the film, revealing a (√3 × √3) superlattice of the NiSe2 film formed on the (√7 × √7) superlattice of the substrate. Fabrication of this 2D NiSe2 film opens opportunities to research its applications, especially for electrocatalysis and energy storage devices.

  6. Ferroelectric strain modulation of antiferromagnetic moments in Ni/NiO ferromagnet/antiferromagnet heterostructures

    Science.gov (United States)

    Zhang, Yu-Jun; Chen, Jia-Hui; Li, Liang-Liang; Ma, Jing; Nan, Ce-Wen; Lin, Yuan-Hua

    2017-05-01

    Electric field manipulation of magnetic properties has attracted a lot of research interest recently in solid-state physics. However, ferroelectric strain modulation of antiferromagnetic (AFM) layer is rarely studied in ferromagnet/antiferromagnet/ferroelectric heterostructures. In this paper, we prepared a Ni/NiO(001) heterostructure on ferroelectric Pb (Mg1/3N b2 /3 ) 0.7T i0.3O3(001 ) substrates and observed an out-of-plane electric field modulation of exchange bias and magnetic anisotropy in the Ni layer. The exchange bias was easily eliminated by an electric field cycle, which was due to the AFM domain switching induced by piezoelectric strain in the NiO layer. Synchrotron x ray linear dichroism results confirmed the AFM moment alignment induced by ferroelectric strain as well. Our work showed a promising strategy to manipulate AFM moments and domains, serving the blooming AFM spintronics.

  7. Irradiation induced defects in deformed $Ni_{3}Ge$ and $Ni_{3}Al$ single crystals

    CERN Document Server

    Murakumo, T; Miyahara, A; Hannuki, T; Sato, A

    2000-01-01

    The effect of plastic deformation on the formation of point defects and defect clusters by electron irradiation has been studied in Ll /sub 2/ ordered Ni/sub 3/Ge and Ni/sub 3/Al by high voltage electron microscopy. It is found that defects are formed preferentially along the Burgers vector directions as linear lines and grow into linear chains of clusters by electron irradiation. This phenomenon is explained by preferential generation of the defects along the antiphase boundary (APE) tubes, in specimens deformed both below and above the peak temperature T/sub p/. Based on three-dimensional analyses of the defect distribution, the formation mechanism of the APE tubes is discussed with particular reference to superdislocation motion and the strengthening of the Ll/sub 2/ ordered compounds of Ni /sub 3/Ge and Ni/sub 3/Al. (44 refs).

  8. Evolution of collectivity in the 78Ni region: Coulomb excitation of 74Ni at intermediate energies.

    Directory of Open Access Journals (Sweden)

    Marchi T.

    2014-03-01

    Full Text Available The study of the collective properties of nuclear excitations far from stability provides information about the shell structure at extreme conditions. Spectroscopic observables such as the energy or the transition probabilities of the lowest states, in nuclei with large neutron excess, allow to probe the density and isospin dependence of the effective interaction. Indeed, it was recently shown that tensor and three-body forces play an important role in breaking and creating magic numbers. Emblematic is the case of the evolution of the Ni isotopic chain where several features showed up moving from the most neutron rich stable isotope (64Ni towards the 78Ni nucleus where the large neutron excess coincides with a double shell closure. In this framework, we have recently performed an experiment with the goal to extract the B(E2; 0+ → 2+ value for the 74Ni nucleus in an intermediate-energy Coulomb excitation experiment: preliminary results are discussed.

  9. Synthesis and Magnetic Properties of Ni and Carbon Coated Ni by Levitational Gas Condensation (LGC

    Directory of Open Access Journals (Sweden)

    Young Rang Uhm

    2013-01-01

    Full Text Available The nickel (Ni, and carbon coated nickel (Ni@C nanoparticles were synthesized by levitaional gas condensation (LGC methods using a micron powder feeding (MPF system. Both metal and carbon coated metal nano powders include a magnetic ordered phase. The synthesis by LGC yields spherical particles with a large coercivity. The abnormal initial magnetization curve for Ni indicates a non-collinear magnetic structure between the core and surface layer of the particles. The carbon coated particles had a core structure diameter at and below 10 nm and were covered by 2-3 nm thin carbon layers. The hysteresis loop of the as-prepared Ni@Cs materials with unsaturated magnetization shows a superparamagnetic state at room temperature.

  10. Transformation characteristics of TiNi/TiNi alloys synthesized by explosive welding

    Institute of Scientific and Technical Information of China (English)

    LI Juntao; ZHENG Yanjun; CUI Lishan

    2007-01-01

    Effects of severe deformation and heat treatment on the transformation behaviors of explosively welded duplex TiNi/TiNi shape memory alloys(SMAs)were investigated by the differential scanning calorimeter (DSC).The explosively welded duplex TiNi/TiNi plate of 0.7mm in thickness was cold-rolled at room temperature to the extent of 60%reduction in thickness and then annealed at different temperatures (573-973K)for different time(15min-10h).Low temperature(623-723K)heat treatment led to amorphous crystallization.At higher temperature(873K),the re-crystallization took place in the specimens.Analysis showed that the change of internal stresses is iust the root cause of the change of transformation temperature.The relationships between the transformation behaviors and the heat treatment were discussed in the present report.

  11. Optical, magnetic, and microwave properties of Ni/NiO nanoparticles

    Science.gov (United States)

    Rostamnejadi, Ali; Bagheri, Saber

    2017-04-01

    In this research, the optical, magnetic, and microwave properties of NiO and Ni/NiO nanoparticles have been studied. The absorbance spectra of the samples show the electronic d-d excitations with energy band gap of about 3.8 eV. The magnetization measurement confirms the existence of ferromagnetic phase at room temperature, which could be originated from the uncompensated surface spins or ferromagnetic clusters in the antiferromagnetic ground state of NiO nanoparticles. The microwave parameters such as ac conductivity, skin depth, electric and magnetic loss tangents, attenuation constant, and reflection loss have been calculated. While both magnetic and dielectric relaxation processes have been observed in the complex permeability and permittivity, the microwave absorption is mainly attributed to the dielectric relaxation processes.

  12. Bottom and top AF/FM interfaces of NiFe/FeMn/NiFe trilayers

    Science.gov (United States)

    Nascimento, V. P.; Passamani, E. C.; Alvarenga, A. D.; Biondo, A.; Pelegrini, F.; Saitovitch, E. Baggio

    2008-01-01

    X-ray reflectivity analyses were performed in the Si/WTi (7 nm)/NiFe (30 nm)/FeMn (13 nm)/NiFe (10 nm)/WTi (7 nm) exchange-biased system prepared by magnetron sputtering under three different argon working pressures. Layer-by-layer analyses were realized in order to obtain the interfacial roughness parameters quantitatively. For a fixed argon pressure, the root-mean-square roughness (including the atomic grading) of the upper (FeMn/NiFe) interface are greater than that for the lower one in all studied samples. Argon working pressure also has severe influence over the NiFe/FeMn interfaces, being more pronounced at the upper interfaces.

  13. Synthetic Ni3S2/Ni hybrid architectures as potential contrast agents in MRI

    Science.gov (United States)

    Ma, J.; Chen, K.

    2016-04-01

    Traditional magnetic resonance imaging (MRI) contrast agents mainly include superparamagnetic (SPM) iron oxide nanoparticle as T 2 contrast agent for liver and paramagnetic Gd (III)-chelate as T 1 contrast agent for all organs. In this work, weak ferromagnetic kale-like and SPM cabbage-like Ni3S2@Ni hybrid architectures were synthesized and evaluated as potential T 1 MRI contrast agents. Their relatively small r 2/r 1 ratios of 2.59 and 2.38, and high r 1 values of 11.27 and 4.89 mmol-1 L s-1 (for the kale-like and cabbage-like Ni3S2@Ni, respectively) will shed some light on the development of new-type MRI contrast agents.

  14. Modelling of rechargeable NiMH batteries

    NARCIS (Netherlands)

    Ledovskikh, A.; Verbitskiy, E.; Ayeb, A.; Notten, P.H.L.

    2003-01-01

    A new mathematical model has been developed for rechargeable NiMH batteries, which is based on the occurring physical–chemical processes inside. This model enables one to simultaneously simulate the battery voltage, internal gas pressures (both PO2 and PH2) and temperature during battery operation.

  15. Modelling of rechargeable NiMH batteries

    NARCIS (Netherlands)

    Ledovskikh, A.; Verbitskiy, E.; Ayeb, A.; Notten, P.H.L.

    2003-01-01

    A new mathematical model has been developed for rechargeable NiMH batteries, which is based on the occurring physical–chemical processes inside. This model enables one to simultaneously simulate the battery voltage, internal gas pressures (both PO2 and PH2) and temperature during battery operation.

  16. Laser alloyed Al-Ni-Fe coatings

    CSIR Research Space (South Africa)

    Pityana, SL

    2008-10-01

    Full Text Available analysed by menas of X-ray diffraction (XRD), optical and scanning electron microscopy (SEM). It was found that when alloying with Fe-rich mixtures, the thin surface layers contained a number of cracks in the heat affected zones (HAZ). Alloying with Ni...

  17. Cancer en los niños

    OpenAIRE

    Pereira, Fabio; Ramírez Wurttenberger, Óscar; Lotero, Viviana; Fundación Valle de Lili

    2004-01-01

    Epidemiología/ ¿Por qué se presenta el cáncer en los niños?/ ¿Cómo se realiza el diagnóstico?/ ¿Cómo es el tratamiento?/ ¿Resultados del tratamiento?/Recomendaciones/Otras formas de tratamiento: El trasplante de médula ósea.

  18. Two-stage Strain Recovery of Explosively Welded NiTi/NiTi Shape Memory Alloys Prestrained in Martensitic Phase

    Institute of Scientific and Technical Information of China (English)

    Yan Zhu; Cui Lishan; Zheng Yanjun

    2006-01-01

    The present work aimed to investigate the transformation behavior and strain recovery characteristics of Ni50.2Ti/Ni51Ti shape memory alloys (SMAs) prepared by explosive welding. The differential scanning calorimetry (DSC) results showed that the reverse transformation temperatures and the temperature range of NiTi-NiTi alloys increased with increasing prestrain level. Meanwhile, a two-stage strain recovery over a wide temperature range was obtained.

  19. Morphological Evolution of Multilayer Ni/NiO Thin Film Electrodes during Lithiation.

    Science.gov (United States)

    Evmenenko, Guennadi; Fister, Timothy T; Buchholz, D Bruce; Li, Qianqian; Chen, Kan-Sheng; Wu, Jinsong; Dravid, Vinayak P; Hersam, Mark C; Fenter, Paul; Bedzyk, Michael J

    2016-08-10

    Oxide conversion reactions in lithium ion batteries are challenged by substantial irreversibility associated with significant volume change during the phase separation of an oxide into lithia and metal species (e.g., NiO + 2Li(+) + 2e(-) → Ni + Li2O). We demonstrate that the confinement of nanometer-scale NiO layers within a Ni/NiO multilayer electrode can direct lithium transport and reactivity, leading to coherent expansion of the multilayer. The morphological changes accompanying lithiation were tracked in real-time by in-operando X-ray reflectivity (XRR) and ex-situ cross-sectional transmission electron microscopy on well-defined periodic Ni/NiO multilayers grown by pulsed-laser deposition. Comparison of pristine and lithiated structures reveals that the nm-thick nickel layers help initiate the conversion process at the interface and then provide an architecture that confines the lithiation to the individual oxide layers. XRR data reveal that the lithiation process starts at the top and progressed through the electrode stack, layer by layer resulting in a purely vertical expansion. Longer term cycling showed significant reversible capacity (∼800 mA h g(-1) after ∼100 cycles), which we attribute to a combination of the intrinsic bulk lithiation capacity of the NiO and additional interfacial lithiation capacity. These observations provide new insight into the role of metal/metal oxide interfaces in controlling lithium ion conversion reactions by defining the relationships between morphological changes and film architecture during reaction.

  20. Morphological Evolution of Multilayer Ni/NiO Thin Film Electrodes during Lithiation

    Energy Technology Data Exchange (ETDEWEB)

    Evmenenko, Guennadi; Fister, Timothy T.; Buchholz, D. Bruce; Li, Qianqian; Chen, Kan-Sheng; Wu, Jinsong; Dravid, Vinayak P.; Hersam, Mark C.; Fenter, Paul; Bedzyk, Michael J.

    2016-08-10

    Oxide conversion reactions in lithium ion batteries are challenged by substantial irreversibility associated with significant volume change during the phase separation of an oxide into lithia and metal species (e.g., NiO + 2Li(+) + 2e(-) -> Ni + Li2O). We demonstrate that the confinement of nanometer-scale NiO layers within a Ni/NiO multilayer electrode can direct lithium transport and reactivity, leading to coherent expansion of the multilayer. The morphological changes accompanying lithiation were tracked in real-time by in-operando X-ray reflectivity (XRR) and ex situ cross-sectional transmission electron microscopy on well-defined periodic Ni/NiO multilayers grown by pulsed-laser deposition. Comparison of pristine and lithiated structures reveals that the nm-thick nickel layers help initiate the conversion process at the interface and then provide an architecture that confines the lithiation to the individual oxide layers. XRR data reveal that the lithiation process starts at the top and progressed through the electrode stack, layer by layer resulting in a purely vertical expansion. Longer term cycling showed significant reversible capacity (similar to 800 mA h g(-1) after similar to 100 cycles), which we attribute to a combination of the intrinsic bulk lithiation capacity of the NiO and additional interfacial lithiation capacity. These observations provide new insight into the role of metal/metal oxide interfaces in controlling lithium ion conversion reactions by defining the relationships between morphological changes and film architecture during reaction.

  1. The electronic structure of NiAl and NiSi

    OpenAIRE

    Sarma, D. D.; Speier, W.; Zeller, R.; Leuken, E. van; Groot, R.A. de; Fuggle, J.C.

    1989-01-01

    A study of the electronic structures of NiSi and NiAl employing electron spectroscopies and theoretical calculations is presented. Experimental results, obtained with x-ray photoemission and bremsstrahlung isochromat spectroscopy, are interpreted by means of density of states and matrix element calculations for the compounds in their real crystal structure. This gives a detailed picture of the electronic states over the whole bonding-anti-bonding region below and above the Fermi level. Cluste...

  2. Characteristics of Reactive Ni3Sn4 Formation and Growth in Ni-Sn Interlayer Systems

    Science.gov (United States)

    Lis, Adrian; Kenel, Christoph; Leinenbach, Christian

    2016-06-01

    The near-isothermal growth and formation of Ni3Sn4 intermetallic compounds (IMC) in Ni-Sn interlayer systems was studied in the solid state at 473 K (200 °C) and under solid-liquid conditions at 523 and 573 K (250 °C and 300 °C) from an initial state of a few seconds. Scalloped solid-state IMC formation was mainly driven by grain boundary diffusion of Ni through the IMC layer combined with the grain coarsening of the IMC layer. Under solid-liquid conditions, the formation of faceted and needle-shaped Ni3Sn4 grains as well as an atypical IMC growth behavior with similar parabolic growth constants for 523 K and 573 K (250 °C and 300 °C) was observed within the first 180 seconds of the holding time, and IMC growth occurred as an isothermal solidification from the Ni-saturated Sn melt. Due to the progressive densification of the IMC layer and the diffusion-controlled growth, the kinetics slowed down by approximately one order of magnitude after 180 seconds of annealing. The final stage was characterized by the formation of IMC islands ahead of the interfacial Ni3Sn4 layer. Needle-like IMC growth was effectively suppressed under combined solid-state and solid-liquid conditions. Textured Ni3Sn4 IMC formation at the Ni-Sn interface was approved with pole figure measurements. The activation energy Q for solid-liquid IMC formation was calculated as 43.3 kJ/mol, and processing maps for IMC growth and Sn consumption were derived as functions of temperature and time, respectively.

  3. On the origin of resistive switching volatility in Ni/TiO2/Ni stacks

    OpenAIRE

    Cortese, Simone; Trapatseli, Maria; Khiat, Ali; Prodromakis, Themistoklis

    2016-01-01

    Data for the paper "Cortese, Simone, Trapatseli, Maria and Khiat, Ali et al. (2016) On the origin of resistive switching volatility in Ni/TiO2/Ni stacks. Journal of Applied Physics" \\ud \\ud The file contains all the current versus voltage measurements described in the paper: the resistive switching mechanism curves are presented, as well as subthreshold effects related to the filament instability. The area dependence of the resistances involved is also present in the file.

  4. Ni-based Ni-Fe-B-Si-Ta bulk metallic glasses

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The glass-forming ability and properties of Ni-based Ni-Fe-B-Si-Ta bulk metallic glasses are explored in this work. The alloy compositions are determined by using a combination of the cluster line approach, the multi-alloying strategy and the substitutions of similar elements. Bulk metallic glasses with diameters of 3 mm take shape at compositions formulated under the clus- ter-plus-glue-atom model [M9B]B~[(Ni1-xFex)7.71(Si0.66Ta0.34)1.29B]B0.94=(Ni1-xFex)70.5B17.7Si7.8Ta4, x=0.35–0.45, where the bracketed part is the cluster and the unbracketed part is the glue atoms. These alloys exhibit good magnetic properties. The maximum Is is found in the (Ni0.55Fe0.45)70.5B17.7Si7.8Ta4 alloy which reaches 0.51 T, with its Hc as low as 8.5 A/m. Interestingly, these alloys display dual glass transitions at (Ni0.65Fe0.35)70.5B17.7Si7.8Ta4, (Ni0.60Fe0.4)70.5B17.7Si7.8Ta4 and (Ni0.55Fe0.45)70.5B17.7- Si7.8Ta4 as unveiled by Temperature-Modulated Differential Scanning Calorimetry.

  5. Effect of deposition technique of Ni on the perpendicular magnetic anisotropy in Co/Ni multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Akbulut, S., E-mail: sakbulut@gtu.edu.tr [Gebze Technical University, Physics Department, Istanbul Cad, PK 41400 Gebze/Kocaeli (Turkey); Akbulut, A. [Gebze Technical University, Physics Department, Istanbul Cad, PK 41400 Gebze/Kocaeli (Turkey); Özdemir, M. [Marmara University, Physics Department, Göztepe, Istanbul (Turkey); Yildiz, F., E-mail: fyildiz@gtu.edu.tr [Gebze Technical University, Physics Department, Istanbul Cad, PK 41400 Gebze/Kocaeli (Turkey)

    2015-09-15

    The perpendicular magnetic anisotropy (PMA) of Si/Pt 3.5/(Co 0.3/Ni 0.6){sub n} /Co 0.3/ Pt 3 (all thicknesses are nm) multilayers were investigated for two different sample sets by using ferromagnetic resonance (FMR) and magnetooptic Kerr effect (MOKE) techniques. In the first sample set all layers (buffer, cap, Co and Ni) were grown by magnetron sputtering technique while in the second sample set Ni sub-layers were grown by molecular beam epitaxy (MBE) at high vacuum. Apart from deposition technique of Ni, all other parameters like thicknesses and growth rates of each layers are same for both sample sets. Multilayers in these two sample sets display PMA in the as grown state until a certain value of bilayer repetition (n) and the strength of PMA decreases with increasing n. Magnetic easy axis's of the multilayered samples switched from film normal to the film plane when n is 9 and 5 for the first and second sample sets, respectively. The reason for that, PMA was decreased due to increasing roughness with increasing n. This was confirmed by X Ray Reflectivity (XRR) measurements for both sample sets. Moreover, in the first sample set coercive field values are smaller than the second sample set, which means magnetic anisotropy is lower than the latter one. This stronger PMA is arising due to existence of stronger Pt (111) and Co/Ni (111) textures in the second sample set. - Highlights: • Effect of deposition techniques for Ni sub-layers on magnetic properties in [Co/Ni]{sub n} multilayered films was studied. • Ni sub-layers were deposited by two different techniques, molecular beam epitaxy (MBE) and magnetron sputtering. • Spin reorientation thickness and magnitude of the anisotropy are strongly depending on growing techniques.

  6. Microstructure and mechanical properties of laser melting deposited Ti2Ni3Si/NiTi Laves alloys

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Two Ti2Ni3Si/NiTi Laves phase alloys with chemical compositions of Ni-39Ti-11 Si and Ni-42Ti-8Si (%, mole fraction, the same below), respectively, were fabricated by the laser melting deposition manufacturing process, aiming at studying the effect of Ti,Si contents on microstructure and mechanical properties of the alloys. The Ni-39Ti-llSi alloy consisting of Ti2Ni3Si primary dendrites and Ti2Ni3Si/NiTi eutectic matrix is a conventional hypereutectic Laves phase alloy while the Ni-42Ti-8Si alloy being made up of NiTi primary dendrites uniformly distributed in Ti2Ni3Si/NiTi eutectic is a new hypoeutectic alloy. Mechanical properties of the alloys were investigated by nano-indentation test. The results show that the decrease of Si and the increase of Ti contents change the microstructures of the alloys from hypereutectic to hypoeutectic, which influences the mechanical properties of the alloys remarkably. Corrosion behaviors of the alloys were also evaluated by potentiodynamic anodic polarization curves.

  7. The electronic structure of NiO for Ni 3s-hole states including full orbital relaxation and localization

    NARCIS (Netherlands)

    Bagus, Paul S.; Broer, R; Graaf, C. de; Nieuwpoort, W.C.

    1999-01-01

    The electronic structure of NiO, with emphasis on the Ni 3s-hole ionic states, is studied using non-orthogonal configuration interaction, NOCI, wavefunctions for an NiO6 model of the crystal. Orbital sets are relaxed, or optimized, separately for each configuration used in the NOCI and orbital

  8. Dealloying Behavior of NiCo and NiCoCu Thin Films

    Directory of Open Access Journals (Sweden)

    Benjamin E. Peecher

    2016-01-01

    Full Text Available Porous metals and alloys, such as those fabricated via electrochemical dealloying, are of interest for a variety of energy applications, ranging from their potential for enhanced catalytic behavior to their use as high surface area supports for pseudocapacitor materials. Here, the electrochemical dealloying process was explored for electrodeposited binary NiCo and ternary NiCoCu thin films. For each of the four different metal ratios, films were dealloyed using linear sweep voltammetry to various potentials in order to gain insight into the evolution of the film over the course of the linear sweep. Electrochemical capacitance, scanning electron microscopy, and energy dispersive X-ray spectroscopy were used to examine the structure and composition of each sample before and after linear sweep voltammetry was performed. For NiCo films, dealloying resulted in almost no change in composition but did result in an increased capacitance, with greater increases occurring at higher linear sweep potentials, indicating the removal of material from the films. Dealloying also resulted in the appearance of large pores on the surface of the high nickel percentage NiCo films, while low nickel percentage NiCo films had little observable change in morphology. For NiCoCu films, Cu was almost completely removed at linear sweep potentials greater than 0.5 V versus Ag/AgCl. The linear sweep removed large Cu-rich dendrites from the films, while also causing increases in measured capacitance.

  9. Phase transformation and deformation behavior of NiTi-Nb eutectic joined NiTi wires.

    Science.gov (United States)

    Wang, Liqiang; Wang, Cong; Zhang, Lai-Chang; Chen, Liangyu; Lu, Weijie; Zhang, Di

    2016-04-06

    NiTi wires were brazed together via eutectic reaction between NiTi and Nb powder deposited at the wire contact region. Phase transformation and deformation behavior of the NiTi-Nb eutectic microstructure were investigated using transmission electron microscopy (TEM) and cyclic loading-unloading tests. Results show that R phase and B19' martensite transformation are induced by plastic deformation. R phase transformation, which significantly contributes to superelasticity, preferentially occurs at the interfaces between NiTi and eutectic region. Round-shaped Nb-rich phase with rod-like and lamellar-type eutectics are observed in eutectic regions. These phases appear to affect the deformation behavior of the brazed NiTi-Nb region via five distinct stages in stress-strain curves: (I) R phase reorientation, (II) R phase transformation from parent phase, (III) elastic deformation of reoriented martensite accompanied by the plastic deformation of Nb-rich phase and lamellar NiTi-Nb eutectic, (IV) B19' martensitic transformation, and (V) plastic deformation of the specimen.

  10. Cathodic stripping voltammetry of nickel: sonoelectrochemical exploitation of the Ni(III)/Ni(II) couple.

    Science.gov (United States)

    Davis, James; Vaughan, D Huw; Stirling, David; Nei, Lembit; Compton, Richard G

    2002-07-19

    The exploitation of the Ni(III)/Ni(II) transition as a means of quantifying the concentration of nickel within industrial samples was assessed. The methodology relies upon the reagentless electrodeposition of Ni onto a glassy carbon electrode and the subsequent oxidative conversion of the metallic layer to Ni(III). The analytical signal is derived from a cathodic stripping protocol in which the reduction of the Ni(III) layer to Ni(II) is monitored through the use of square wave voltammetry. The procedure was refined through the introduction of an ultrasonic source which served to both enhance the deposition of nickel and to remove the nickel hydroxide layer that results from the measurement process. A well-defined stripping peak was observed at +0.7 V (vs. Agmid R:AgCl) with the response found to be linear over the range 50 nM to 1 muM (based on a 30 s deposition time). Other metal ions such as Cu(II), Mn(II), Cr(III), Pb(II), Cd(II), Zn(II), Fe(III) and Co(II) did not interfere with the response when present in hundred fold excess. The viability of the technique was evaluated through the determination of nickel within a commercial copper nickel alloy and validated through an independent comparison with a standard ICP-AES protocol.

  11. A New Polycrystalline Co-Ni Superalloy

    Science.gov (United States)

    Knop, M.; Mulvey, P.; Ismail, F.; Radecka, A.; Rahman, K. M.; Lindley, T. C.; Shollock, B. A.; Hardy, M. C.; Moody, M. P.; Martin, T. L.; Bagot, P. A. J.; Dye, D.

    2014-12-01

    In 2006, a new-ordered L12 phase, Co3(Al,W), was discovered that can form coherently in a face-centered cubic (fcc) A1 Co matrix. Since then, a community has developed that is attempting to take these alloys forward into practical applications in gas turbines. A new candidate polycrystalline Co-Ni γ/ γ' superalloy, V208C, is presented that has the nominal composition 36Co-35Ni-15Cr-10Al-3W-1Ta (at.%). The alloy was produced by conventional powder metallurgy superalloy methods. After forging, a γ' fraction of ~56% and a secondary γ' size of 88 nm were obtained, with a grain size of 2.5 μm. The solvus temperature was 1000°C. The density was found to be 8.52 g cm-3, which is similar to existing Ni alloys with this level of γ'. The alloy showed the flow stress anomaly and a yield strength of 920 MPa at room temperature and 820 MPa at 800°C, similar to that of Mar-M247. These values are significantly higher than those found for either conventional solution and carbide-strengthened Co alloys or the γ/ γ' Co superalloys presented in the literature thus far. The oxidation resistance, with a mass gain of 0.08 mg cm-2 in 100 h at 800°C, is also comparable with that of existing high-temperature Ni superalloys. These results suggest that Co-based and Co-Ni superalloys may hold some promise for the future in gas turbine applications.

  12. The accumulation of Ni in serpentines and garnierites from the Falcondo Ni-laterite deposit (Dominican Republic) elucidated by means of μXAS

    Science.gov (United States)

    Roqué-Rosell, Josep; Villanova-de-Benavent, Cristina; Proenza, Joaquín A.

    2017-02-01

    Ni-bearing serpentines and garnierites (Ni-bearing Mg-phyllosilicates) are the main Ni ores in the Falcondo Ni-laterite deposit (Dominican Republic). In the present paper a set of garnierite samples and the associated Ni-bearing serpentines with characteristic mineral compositions and textures, from the saprolite horizon, were studied by EMPA, μXRF and μXAS. The ultimate goal is to elucidate, for the first time, the Fe speciation and the Ni local environment of saprolite ores from Ni-laterites of the Dominican Republic. The chemical composition of the minerals has been obtained by means of EMPA and the Ni, Fe and Cr elemental maps obtained by μXRF allowed distinguishing the saprolite fragments containing Ni-bearing serpentines and Fe oxyhydroxides from the garnierite veins. The Fe K-edge μXANES demonstrated that Fe in the Ni-poor primary serpentine is mostly in the Fe2+ form, whereas in the Ni-bearing serpentine constituting the bulk of the saprolite and in the Fe-bearing garnierite Type I Fe was in the form of Fe3+. In parallel, the local environment of Ni determined by means of Ni K-edge μEXAFS confirmed that in Ni-poor primary serpentines Ni formed a homogeneous Ni-Mg solid solution, in garnierites formed Ni-Ni clusters, and in Ni-bearing secondary serpentines Ni was found in Ni-Mg and Ni-Ni mixed sites. This paper explains the accumulation of Ni, the speciation of Fe in garnierites with various mineral compositions and in Ni-bearing serpentines from the saprolite horizon in Ni-laterite deposits.

  13. A Study on Production of Carbon Nanotubes by CH4 Decomposition over LaNiO3, La4Ni3O10, La3Ni2O7 and La2NiO4

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Carbon nanotubes (CNTs) of narrow size distribution can be abundantly produced in the catalytic decomposition of CH4 over pre-reduced LaNiO3, La4Ni3O10, La3Ni2O7 and La2NiO4.The CNTs obtained were characterized by means of transmission electron microscopy (TEM).Thermal oxidation of CNTs in air was monitored thermogravimetrically (TG). The resultsrevealed that a lower La/Ni ratio of the catalysts would lead to a wider diameter distribution and a higher degree of graphitic nature.

  14. Preparation and Oxygen Evolution Reaction Performance of Ni/NiCo2O4 Electrode%Ni/NiCo2O4电极的制备及其析氧反应性能

    Institute of Scientific and Technical Information of China (English)

    王森林; 王丽品; 张振洪

    2013-01-01

      采用溶胶-凝胶法制备NiCo2O4尖晶石粉体,然后以多孔Ni为基体,通过复合溶胶涂覆结合烧结制备Ni/NiCo2O4涂层电极.运用扫描电子显微镜(SEM)、能量色散谱(EDS)和X射线衍射(XRD)表征粉体以及Ni/NiCo2O4涂层电极的组成和结构.采用循环伏安(CV),稳态极化(LSV),电化学阻抗谱(EIS),恒电位阶跃以及恒电位长时间电解研究涂层电极在5 mol·L-1 KOH溶液中的电催化析氧反应(OER).结果表明:Ni/NiCo2O4涂层电极与多孔Ni电极对比,具有低的析氧过电位、高的比表面积和高的稳定性能;其中比表面积增大了28.69倍,表观活化能在不同过电位分别降低了166.78和162.15 kJ·mol-1.%Spinel-type NiCo2O4 powders were prepared by a sol-gel method, and Ni/NiCo2O4 electrode was prepared through composite sol method combined with sintering. The composition and structure of Ni/NiCo2O4 were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDS). Electrocatalytic properties of the Ni/NiCo2O4 electrode in the oxygen evolution reaction (OER) were studied in 5 mol·L-1 KOH solution, using cyclic voltammertry (CV), linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS), chronoamperometry, and extended duration constant potential electrolysis. The Ni/NiCo2O4 electrode exhibited a lower OER over-potential, higher specific surface area, and better stability than a porous Ni electrode. The specific surface area of the Ni/NiCo2O4 electrode was 28.69 times greater than that of the porous Ni electrode, and its apparent activation energies decrease 166.78 and 162.15 kJ·mol-1 at different overpotentials, respectively.

  15. Atomistic modeling of ternary additions to NiTi and quaternary additions to Ni-Ti-Pd, Ni-Ti-Pt and Ni-Ti-Hf shape memory alloys

    Energy Technology Data Exchange (ETDEWEB)

    Mosca, H.O., E-mail: hmosca@cnea.gov.ar [Gcia. Investigacion y Aplicaciones, CNEA, Av. Gral Paz 1499, B1650KNA San Martin (Argentina); GCMM, UTN, FRG Pacheco, Av. H. Yrigoyen 288, Gral. Pacheco (Argentina); Bozzolo, G. [Loyola University Maryland, 4501 N. Charles St., Baltimore, MD 21210 (United States); Grosso, M.F. del [Gcia. Investigacion y Aplicaciones, CNEA, Av. Gral Paz 1499, B1650KNA San Martin (Argentina); GCMM, UTN, FRG Pacheco, Av. H. Yrigoyen 288, Gral. Pacheco (Argentina); Consejo Nacional de Investigaciones Cientificas y Tecnicas, CONICET (Argentina)

    2012-08-15

    The behavior of ternary and quaternary additions to NiTi shape memory alloys is investigated using a quantum approximate method for the energetics. Ternary additions X to NiTi and quaternary additions to Ni-Ti-Pd, Ni-Ti-Pt, and Ni-Ti-Hf alloys, for X=Au, Pt, Ir, Os, Re, W, Ta,Ag, Pd, Rh, Ru, Tc, Mo, Nb, Zr, Zn, Cu, Co, Fe, Mn, V, Sc, Si, Al and Mg are considered. Bulk properties such as lattice parameter, energy of formation, and bulk modulus of the B2 alloys are studied for variations due to the presence of one or two simultaneous additives.

  16. Magnetic properties of nanostructural γ-Ni-28Fe alloy

    Institute of Scientific and Technical Information of China (English)

    LIU Yin; QIN Xiao-ying; QIU Tai

    2006-01-01

    Nanostructural γ-Ni-28Fe alloy (nano γ-Ni-28Fe) was successfully prepared by mechanochemical alloying(MCA). The relationship between the microstructure and the synthesis conditions was investigated by using XRD, TEM, SEM as well as BET analyzer. The results show that nano γ-Ni-28Fe alloy is composed ora gamma phase (FCC structure). Its grain size is about 20 nm at reduction temperature below 600 ℃. The magnetic measurements indicate that the saturation magnetization ofnano γ-Ni-28Fe alloy to its decrease of the grain size and chemical composition in nano γ-Ni-28Fe alloy.

  17. Effect of adding methods of metallic phase on microstructure and thermal shock resistance of Ni/(90NiFe2O4-10NiO) cermets

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Ball mixing and electroless plating were respectively used as the adding methods of metallic phase to prepare Ni/(90NiFe2O4-10NiO) cermets for the inert anode in aluminum electrolysis. The microstructure and thermal shock resistance of cermet samples were studied. The results show that, for the samples prepared by ball mixing method, aggregation of metallic phase is found in either the green blocks or sintered samples and the extent of aggregation increases with the increase of metal content. For 6.5Ni/(90NiFe2O4-10NiO) cermets prepared with electroless plating method, the homogeneous and fine metallic particles are found in either the green compacts or sintered samples, but the relative density and thermal shock residual strength decrease by 3% and 28%-58% respectively, compared with samples prepared with ball mixing method.

  18. Composition and structure of NiAu nanoparticles formed by laser ablation of Ni target in Au colloidal solution

    Energy Technology Data Exchange (ETDEWEB)

    Petrović, Suzana, E-mail: spetro@vinca.rs [University of Belgrade, Institute of Nuclear Science-Vinča, POB 522, 11001 Belgrade (Serbia); Milovanović, D. [University of Belgrade, Institute of Nuclear Science-Vinča, POB 522, 11001 Belgrade (Serbia); Salatić, B. [University of Belgrade, Institute of Physics Belgrade, Pregrevica 118, 11080 Belgrade (Serbia); Peruško, D. [University of Belgrade, Institute of Nuclear Science-Vinča, POB 522, 11001 Belgrade (Serbia); Kovač, J. [Jožef Stefan Institute, Jamova 39, 1000 Ljubljana (Slovenia); Dražić, G. [National Institute of Chemistry, Hajdrihova 19, Ljubljana (Slovenia); Mitrić, M.; Trtica, M. [University of Belgrade, Institute of Nuclear Science-Vinča, POB 522, 11001 Belgrade (Serbia); Jelenković, B. [University of Belgrade, Institute of Physics Belgrade, Pregrevica 118, 11080 Belgrade (Serbia)

    2015-09-15

    Bimetallic NiAu and complex NiO:Au nanoparticles were formed by laser ablation of Ni target immersed in the colloidal gold solution. Effect of laser parameters (pulse duration, fluences and ablation times) on size and composition of nanoparticles was investigated by ablating the target with two Nd:YAG lasers at 1064 nm, operating with different pulse durations, 150 ps and 20 ns. Stronger ablation of the Ni target and subsequient synthesis of nanoparticles is achieved with picosecond pulses, compared to the nanoparticles production with nanosecond pulses, because the former ablation induces activation of different reactions between species in the colloidal solution. Shape, size and composition of the synthesized nanopraticles were found to correlate with the concentration of Ni species in the colloidal solution. Higher Ni concentration leads to formation of larger NiAu nanoparticles in form of solid solution. Smaller nanoparticles with lower Ni concentration in the colloidal solution were achieved by their synthesis during nanosecond pulses, when the obtained distribution of composition corresponds to the NiO matrix with incorporated golden nanoparticles. The results also demonstrate that the formation of bimetallic NiAu and complex NiO:Au nanoparticles were possible by means of laser ablation in liquids. - Highlights: • Bimetallic NiAu and complex NiO:Au nanoparticles fabricated by laser ablation in liquids. • Influence of the laser pulse duration on the characteristics of the NiAu nanoparticles. • Composition of the nanopraticles is correlated with content of Ni in the colloidal solution.

  19. Properties of highly crystalline NiO and Ni nanoparticles prepared by high-temperature oxidation and reduction

    Science.gov (United States)

    Feygenson, Mikhail; Kou, Angela; Kreno, Lauren E.; Tiano, Amanda L.; Patete, Jonathan M.; Zhang, Fen; Kim, Moo Sung; Solovyov, Vyacheslav; Wong, Stanislaus S.; Aronson, Meigan C.

    2010-01-01

    We describe here the use of high-temperature oxidation and reduction to produce highly crystalline nanoparticles of Ni and NiO. Starting with an amorphous Ni powder, we demonstrate that oxidation at 900°C produces faceted NiO nanocrystals with sizes ranging from 20 to 60 nm. High-resolution transmission electron microscopy measurements indicate near-perfect atomic order, truncated by (200) surfaces. Magnetization measurements reveal that the Néel temperature of these NiO nanoparticles is 480 K, substantially reduced by finite-size effects from the bulk value of 523 K. The magnetization of these faceted NiO nanoparticles does not saturate in fields as large as 14 T while a loop offset is observed which increases from 1000 Oe at 300 K to its maximum value of 3500 Oe at 50 K. We have used high-temperature reduction to transform the faceted NiO nanoparticles into highly ordered Ni nanoparticles, with a Curie temperature of 720 K and blocking temperatures in excess of 350 K. Subsequent efforts to reoxidize these Ni nanoparticles into the core-shell morphology found that the Ni nanoparticles are much more resistant to oxidation than the original Ni powder, perhaps due to the relative crystalline perfection of the former. At 800°C , an unusual surface roughening and subsequent instability was observed, where 50-nm-diameter NiO rods grow from the Ni surfaces. We have demonstrated that high-temperature oxidation and reduction in Ni and NiO are both reversible to some extent and are highly effective for creating the highly crystalline nanomaterials required for applications such as exchange-bias devices.

  20. Properties of Highly Crystalline NiO and Ni Nanoparticles Prepared by High-temperature Oxidation and Reduction

    Energy Technology Data Exchange (ETDEWEB)

    Feygenson, M.; Kou, A.; Kreno, L.E.; Tiano, A.L.; Patete, J.M.; Zhang, F.; Kim, M.S.; Solovyov, V.; Wong, S.S.; Aronson, M.C.

    2010-01-26

    We describe here the use of high-temperature oxidation and reduction to produce highly crystalline nanoparticles of Ni and NiO. Starting with an amorphous Ni powder, we demonstrate that oxidation at 900 C produces faceted NiO nanocrystals with sizes ranging from 20 to 60 nm. High-resolution transmission electron microscopy measurements indicate near-perfect atomic order, truncated by (200) surfaces. Magnetization measurements reveal that the Neel temperature of these NiO nanoparticles is 480 K, substantially reduced by finite-size effects from the bulk value of 523 K. The magnetization of these faceted NiO nanoparticles does not saturate in fields as large as 14 T while a loop offset is observed which increases from 1000 Oe at 300 K to its maximum value of 3500 Oe at 50 K. We have used high-temperature reduction to transform the faceted NiO nanoparticles into highly ordered Ni nanoparticles, with a Curie temperature of 720 K and blocking temperatures in excess of 350 K. Subsequent efforts to reoxidize these Ni nanoparticles into the core-shell morphology found that the Ni nanoparticles are much more resistant to oxidation than the original Ni powder, perhaps due to the relative crystalline perfection of the former. At 800 C, an unusual surface roughening and subsequent instability was observed, where 50-nm-diameter NiO rods grow from the Ni surfaces. We have demonstrated that high-temperature oxidation and reduction in Ni and NiO are both reversible to some extent and are highly effective for creating the highly crystalline nanomaterials required for applications such as exchange-bias devices.

  1. Structure and Phase Transformation Behavior of Ni-P and Ni-W-P Electroless Plating Layer on Aluminium Alloy%铝合金化学镀Ni-P、Ni-W-P组织及相转变行为

    Institute of Scientific and Technical Information of China (English)

    王天旭; 蒙继龙; 胡永俊

    2006-01-01

    采用差示扫描热分析仪(DSC)、X射线衍射(XRD)等研究了6061铝合金基体化学镀Ni-P、Ni-W-P合金的组织结构及相转变行为.结果表明,镀态Ni-P、Ni-W-P镀层的结构都是微晶结构;200℃热处理1h后,Ni-P、Ni-W-P镀层仍为微晶,但微晶有所长大;300、400、525和600℃热处理1h后,Ni-P、Ni-W-P镀层析出Ni3P和Ni晶体,没有其它亚稳相析出;400℃时Ni-P、Ni-W-P镀层硬度达到峰值,其值分别为840HV100和940HV100.

  2. Densities of molten Ni-(Cr, Co, W) superalloys

    Institute of Scientific and Technical Information of China (English)

    XIAO Feng; YANG Ren-hui; FANG Liang; LIU Lan-xiao; ZHAO Hong-kai

    2008-01-01

    In order to obtain more accurate density for molten Ni-(Cr, Co, W) binary alloy, the densities of molten pure Ni and Ni-Cr, Ni-Co, Ni-W alloys were measured with a sessile drop method. It is found that the measured densities of molten pure Ni and Ni-Cr, Ni-Co, Ni-W alloys decrease with increasing temperature in the experimental temperature range. The density of alloys increases with increasing W and Co concentrations while it decreases with increasing Cr concentration in the alloy at 1 773-1 873 K. The molar volume of Ni-based alloys increases with increasing W concentration while it decreases with increasing Co concentration. The effect of Cr concentration on the molar volume of the alloy is little in the studied concentration range. The accommodation among atomic species was analyzed. The deviation of molar volume from ideal mixing shows an ideal mixing of Ni-(Cr, Co, W) binary alloys.

  3. CO2 activation on bimetallic CuNi nanoparticles☆

    Institute of Scientific and Technical Information of China (English)

    Natalie Austin; Brandon Butina; Giannis Mpourmpakis⁎

    2016-01-01

    Density functional theory calculations have been performed to investigate the structural, electronic, and CO2 adsorption properties of 55-atom bimetallic CuNi nanoparticles (NPs) in core-shell and decorated architectures, as well as of their monometallic counterparts. Our results revealed that with respect to the monometallic Cu55 and Ni55 parents, the formation of decorated Cu12Ni43 and core-shell Cu42Ni13 are energetically favorable. We found that CO2 chemisorbs on monometallic Ni55, core-shell Cu13Ni42, and decorated Cu12Ni43 and Cu43Ni12, whereas, it physisorbs on monometallic Cu55 and core-shell Cu42Ni13. The presence of surface Ni on the NPs is key in strongly adsorbing and activating the CO2 molecule (linear to bent transition and elongation of C˭O bonds). This activation occurs through a charge transfer from the NPs to the CO2 molecule, where the local metal d-orbital density localization on surface Ni plays a pivotal role. This work identifies insightful structure-property relationships for CO2 activation and highlights the importance of keeping a balance between NP stability and CO2 adsorption behavior in designing catalytic bimetallic NPs that activate CO2.

  4. CO2 activation on bimetallic CuNi nanoparticles

    Directory of Open Access Journals (Sweden)

    Natalie Austin

    2016-10-01

    Full Text Available Density functional theory calculations have been performed to investigate the structural, electronic, and CO2 adsorption properties of 55-atom bimetallic CuNi nanoparticles (NPs in core-shell and decorated architectures, as well as of their monometallic counterparts. Our results revealed that with respect to the monometallic Cu55 and Ni55 parents, the formation of decorated Cu12Ni43 and core-shell Cu42Ni13 are energetically favorable. We found that CO2 chemisorbs on monometallic Ni55, core-shell Cu13Ni42, and decorated Cu12Ni43 and Cu43Ni12, whereas, it physisorbs on monometallic Cu55 and core-shell Cu42Ni13. The presence of surface Ni on the NPs is key in strongly adsorbing and activating the CO2 molecule (linear to bent transition and elongation of C˭O bonds. This activation occurs through a charge transfer from the NPs to the CO2 molecule, where the local metal d-orbital density localization on surface Ni plays a pivotal role. This work identifies insightful structure-property relationships for CO2 activation and highlights the importance of keeping a balance between NP stability and CO2 adsorption behavior in designing catalytic bimetallic NPs that activate CO2.

  5. State of Supported Nanoparticle Ni during Catalysis in Aqueous Media

    Energy Technology Data Exchange (ETDEWEB)

    Chase, Zizwe; Vjunov, Aleksei; Fulton, John; Camaioni, Donald; Balasubramanian, Mahalingam; Lercher, Johannes

    2015-11-09

    The state of Ni supported on HZSM-5 zeolite, silica, and sulfonated carbon was studied during aqueous-phase catalysis of phenol hydrodeoxygenation using in situ extended X-ray absorption fine structure spectroscopy. On sulfonated carbon and HZSM-5 supports, NiO and Ni(OH)(2) were readily reduced to Ni-0 under reaction conditions (approximate to 35bar H-2 in aqueous phenol solutions containing up to 0.5wt.% phosphoric acid at 473K). In contrast, Ni supported on SiO2 was not stable in a fully reduced Ni-0 state. Water enables the formation of Ni-II phyllosilicate, which is more stable, that is, difficult to reduce, than either -Ni(OH)(2) or NiO. Leaching of Ni from the supports was not observed over a broad range of reaction conditions. Ni-0 particles on HZSM-5 were stable even in presence of 15wt.% acetic acid at 473K and 35bar H-2.

  6. Property comparisons between NiZn ferrites prepared using NiO raw materials of different suppliers%采用不同厂家的NiO原料制备的NiZn铁氧体性能对比

    Institute of Scientific and Technical Information of China (English)

    聂敏; 徐方舟; 孙蒋平; 申志刚

    2011-01-01

    In this research, conventional oxide ceramic method was used to prepare NiZn ferrites, and the effect of NiO raw materials of different suppliers on the magnetic properties of corresponding materials was studied. The experimental results showed that the purity, particle size and surface morphology of NiO raw material seriously affect the reactivity and magnetic properties of the prepared materials. NiO raw material with high purity, homogeneous particle size and pinecone shape is the best choice for preparing high performance NiZn ferrite.%采用传统氧化物法制备NiZn铁氧体材料,考查不同厂家的NiO原料对于高性能NiZn铁氧体材料电磁性能的影响.实验表明,NiO原料的纯度、颗粒尺寸、颗粒形貌严重影响材料的烧结活性和电磁性能.高纯度、颗粒尺寸较均匀、形状为松果状的NiO原料是制备高性能NiZn铁氧体材料的最佳选择.

  7. Crystal structure of Tb5Ni2In4 and Y5Ni2In4, and magnetic properties of Dy5Ni2In4

    Energy Technology Data Exchange (ETDEWEB)

    Provino, A.; Mudryk, Y.; Smetana, V.; Manfrinetti, P.; Pecharsky, V.K.; Gschneidner Jr, Karl; Corbett, J.D.

    2012-02-27

    The crystal structure of the R5Ni2In4 intermetallic compounds was earlier reported for R Ho, Er, Tm, and Lu (Lu5Ni2In4-type, oP22, Pbam); more recently the isostructural phases Dy5Ni2In4 and Sc5Ni2In4 have also been identified. Three inequivalent crystallographic sites are occupied by the R atoms in these compounds. We have synthesized and characterized Dy5Ni2In4 and the two new isotypic compounds Tb5Ni2In4 and Y5Ni2In4. So far, none of the physical properties have been reported on any of these phases; in this article we report on the physical properties of the Dy5Ni2In4 and the crystal structure of Tb5Ni2In4 and Y5Ni2In4 compounds. Measurements of the magnetic properties performed on Dy5Ni2In4 show a ferromagnetic-like ordering with a T-C approximate to 105 K, followed by multiple magnetic orderings at lower temperatures. The fit of the inverse susceptibility in the paramagnetic state follows the Curie-Weiss law, where mu(eff). - 10.3 mu(B)/Dy-atom (close to theoretical value of 10.64 mu(B) for the free ion Dy3+) and a positive paramagnetic Curie temperature theta(p) - 58 K. Ni atoms are most likely to be nonmagnetic. The heat capacity also shows three peaks: a large one at 103K and two weaker at 12 and 8 K, respectively; the in-field heat capacity data corroborate these results, suggesting ferromagnetic and antiferromagnetic orderings at the temperature of 103 and 12 K, respectively. Low temperature x-ray diffraction has shown that the compound does not undergo any structural change down to 5K. (C) 2012 American Institute of Physics

  8. Developing AMS measurement of $^{59}$Ni at CIAE

    CERN Document Server

    Ming, He; Xiangdong, Ruan; Chaoli, Li; Kejun, Dong; liang, Du; Bo, Xie Lin; Zhenyu, Li; Guowen, Zhen; Hao, Hu; J, Liu

    2013-01-01

    Accelerator mass spectrometry (AMS) measurement of $^{59}$Ni has been established at CIAE with the HI-13 tandem accelerator and the recently developed $\\Delta E$-Q3D detection system. $^{59}$Ni standard and commercial NiO samples were measured to check the performance of the $\\Delta E$-Q3D detection system on $^{59}$Ni isobar separation and suppression. An overall suppression factor of about 10$^{7}$ for the interfering isobar $^{59}$Co resulting in detection sensitivity as low as 3.8$\\times 10^{-13}$ atomic ratio ($^{59}$Ni/Ni) has been obtained. Based on these techniques, the AMS measurement method of $^{59}$Ni with high sensitivity is developed.

  9. Measurement and analyses of molten Ni-Co alloy density

    Institute of Scientific and Technical Information of China (English)

    XIAO Feng; K. MUKAI; FANG Liang; FU Ya; YANG Ren-hui

    2006-01-01

    With the advent of powerful mathematical modeling techniques for material phenomena, there is renewed interest in reliable data for the density of the Ni-based superalloys. Up to now, there has been few report on the density of molten Ni-Co alloy.In order to obtain more accurate density data for molten Ni-Co alloy, the density of molten Ni-Co alloy was measured with a modified sessile drop method, and the accommodation of different atoms in molten Ni-Co alloy was analyzed. The density of alloy is found to decrease with increasing temperature and Co concentration in the alloy. The molar volume of molten Ni-Co alloy increases with increasing Co concentration. The molar volume of Ni-Co alloy determined shows a positive deviation from the linear molar volume, and the deviation of molar volume from ideal mixing increases with increasing Co concentration over the experimental concentration range.

  10. Oxidation Behaviour of Sputtered Ni-3Cr-20Al Alloy

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The oxidation behavior of sputtered Ni-3Cr-20Al coating at 900°C in air was investigated. A dense Al2O3 layer was formed on the sputtered Ni-3Cr-20Al coating after 200 h oxidation.However, owing to the segregation of Ni3Al during oxidation Focess at high temperature, the spinel NiAl2O4 was also formed in the Al2O3 layer. It was found that the formation of NiAl2O4had no detrimental effect on the oxidation resistance of the sputtered Ni-3Cr-20Al coating due to the excellent adhesion shown by the Al2O3 and NiAl2O4 complex oxide scale.

  11. Martensitic Transformation in Ni-Mn-Sn-Co Heusler Alloys

    Directory of Open Access Journals (Sweden)

    Alexandre Deltell

    2015-04-01

    Full Text Available Thermal and structural austenite to martensite reversible transition was studied in melt spun ribbons of Ni50Mn40Sn5Co5, Ni50Mn37.5Sn7.5Co5 and Ni50Mn35Sn10Co5 (at. % alloys. Analysis of X-ray diffraction patterns confirms that all alloys have martensitic structure at room temperature: four layered orthorhombic 4O for Ni50Mn40Sn5Co5, four layered orthorhombic 4O and seven-layered monoclinic 14M for Ni50Mn37.5Sn7.5Co5 and seven-layered monoclinic 14M for Ni50Mn35Sn5Co5. Analysis of differential scanning calorimetry scans shows that higher enthalpy and entropy changes are obtained for alloy Ni50Mn37.5Sn7.5Co5, whereas transition temperatures increases as increasing valence electron density.

  12. Moessbauer analysis and magnetic properties of Invar Fe-Ni-C and Fe-Ni-Mn-C alloys

    Energy Technology Data Exchange (ETDEWEB)

    Nadutov, V. M., E-mail: nadvl@imp.kiev.ua; Svystunov, Ye. O.; Kosintsev, S. G.; Tatarenko, V. A. [G.V. Kurdyumov Institute for Metal Physics of the National Academy of Sciences of Ukraine (Ukraine)

    2006-02-15

    The saturation magnetization and the hyperfine magnetic field of different f.c.c. Fe-Ni based alloys containing nearby 29 at .% Ni were studied as a function of temperature and for different Carbon and Manganese contents. We have observed abnormal behaviors that are explained in terms of mixed exchange interactions between atomic spins: J{sub NiNi}(r{sub i}) < 0, J{sub FeFe}(r{sub i}) > 0, J{sub NiFe}(r{sub i}) < 0.

  13. Structural characterization of Ni and Ni/Ti ohmic contact on n-type 4H-SiC

    Energy Technology Data Exchange (ETDEWEB)

    Siad, M., E-mail: siadmenouar@yahoo.fr [Centre de Recherche Nucleaire d' Alger, 02 Bd Frantz Fanon (Algeria); Abdesselam, M. [USTHB, Faculte de Physique, BP 32, El Alia, Bab Ezzouar (Algeria); Souami, N. [Centre de Recherche Nucleaire d' Alger, 02 Bd Frantz Fanon (Algeria); Chami, A.C. [USTHB, Faculte de Physique, BP 32, El Alia, Bab Ezzouar (Algeria)

    2011-10-01

    In this study, we report on the structural characterization of Ni layer and Ni/Ti bilayer contacts on n-type 4H-SiC. The resulting Ni-silicides and the redistribution of carbon, after annealing at 950 deg. C, in the Ni/SiC and the Ni/Ti/SiC contacts are particularly studied by Rutherford Backscattering Spectrometry (RBS) at E{sub {alpha}} = 3.2 MeV, nuclear reaction analysis (NRA) at E{sub d} = 1 MeV, scanning electron microscopy (SEM) and Energy Dispersive X-ray Spectrometry (EDS) techniques.

  14. Peculiarities of thermoelectric half-Heusler phase formation in Gd-Ni-Sb and Lu-Ni-Sb ternary systems

    Energy Technology Data Exchange (ETDEWEB)

    Romaka, V.V., E-mail: romakav@lp.edu.ua [Department of Applied Material Science and Materials Engineering, Lviv Polytechnic National University, Ustyyanovycha Str. 5, 79013 Lviv (Ukraine); Romaka, L.; Horyn, A. [Inorganic Chemistry Department, Ivan Franko Lviv National University, Kyryla and Mefodiya str. 6, 79005 Lviv (Ukraine); Rogl, P. [Institute of Materials Chemistry and Research, University of Vienna, Währingerstrasse 42, A-1090 Wien (Austria); Stadnyk, Yu; Melnychenko, N. [Inorganic Chemistry Department, Ivan Franko Lviv National University, Kyryla and Mefodiya str. 6, 79005 Lviv (Ukraine); Orlovskyy, M.; Krayovskyy, V. [Department of Applied Material Science and Materials Engineering, Lviv Polytechnic National University, Ustyyanovycha Str. 5, 79013 Lviv (Ukraine)

    2016-07-15

    The phase equilibria in the Gd–Ni–Sb and Lu-Ni-Sb ternary systems were studied at 873 K by X-ray and metallographic analyses in the whole concentration range. The interaction of the elements in the Gd–Ni–Sb system results the formation of five ternary compounds at investigated temperature: Gd{sub 5}Ni{sub 2}Sb (Mo{sub 5}SiB{sub 2}-type), Gd{sub 5}NiSb{sub 2} (Yb{sub 5}Sb{sub 3}-type), GdNiSb (MgAgAs-type), Gd{sub 3}Ni{sub 6}Sb{sub 5} (Y{sub 3}Ni{sub 6}Sb{sub 5}-type), and GdNi{sub 0.72}Sb{sub 2} (HfCuSi{sub 2}-type). At investigated temperature the Lu-Ni-Sb system is characterized by formation of the LuNiSb (MgAgAs-type), Lu{sub 5}Ni{sub 2}Sb (Mo{sub 5}SiB{sub 2}-type), and Lu{sub 5}Ni{sub 0.56}Sb{sub 2.44} (Yb{sub 5}Sb{sub 3}-type) compounds. The disordering in the crystal structure of half-Heusler GdNiSb and LuNiSb was revealed by EPMA and studied by means of Rietveld refinement and DFT modeling. The performed electronic structure calculations are in good agreement with electrical transport property studies. - Graphical abstract: Crystal structure model and electron localization function of Lu{sub 5}Ni{sub 2}Sb. Display Omitted - Highlights: • Gd-Ni-Sb and Lu-Ni-Sb phase diagrams were constructed at 873 K. • GdNiSb and LuNiSb are characterized by disordered crystal structure. • Crystal structure optimization with DFT calculations confirmed crystal structure disorder in GdNiSb and LuNiSb.

  15. The formation model of Ni-Cr oxides on NiCoCrAlY-sprayed coating

    Energy Technology Data Exchange (ETDEWEB)

    Liang, G.Y., E-mail: gyliang@mail.xjtu.edu.cn [Department of Material Physics, MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, School of Science, Xi' an Jiaotong University, Xi' an 710049 (China); Zhu, C.; Wu, X.Y.; Wu, Y. [Department of Material Physics, MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, School of Science, Xi' an Jiaotong University, Xi' an 710049 (China)

    2011-05-15

    The atomic arrangement and distribution of oxides (Cr{sub 2}O{sub 3}, NiCr{sub 2}O{sub 4} and NiO) on the sprayed-NiCoCrAlY coating after oxidation are analyzed. The formation and the growth model of Ni-Cr oxide phases are discussed according to the matching relationship between atoms. The outline character and a scale of spinel NiCr{sub 2}O{sub 4} are discussed. The results show that Cr atoms can form two close-packed arrangements in the crystal plane of Cr{sub 2}O{sub 3} perpendicular to <0 0 1> orientation. The atomic spacing in the first arrangement corresponds to double that of Ni/Ni{sub 3}Al in {l_brace}1 1 1{r_brace} crystal face. This suggests that Ni/Ni{sub 3}Al is the substrate for Cr{sub 2}O{sub 3} to grow along <0 0 1> direction. The lattice mismatch between Cr{sub 2}O{sub 3} and Ni/Ni{sub 3}Al is less than that of Al{sub 2}O{sub 3}, which indicates that Cr{sub 2}O{sub 3} is easier to form than Al{sub 2}O{sub 3} during the oxidation process. The atomic spacing in another close-packed arrangement of Cr{sub 2}O{sub 3} perpendicular to <0 0 1> orientation is approximately equal to that of Ni or Cr in the plane of NiCr{sub 2}O{sub 4} and NiO perpendicular to <1 1 1> orientation. So Cr{sub 2}O{sub 3} can be the substrate for NiCr{sub 2}O{sub 4} and NiO to grow in the <0 0 1> direction. NiCr{sub 2}O{sub 4} and NiO can grow directly along the <1 1 1> orientation on each other. NiCr{sub 2}O{sub 4} can grow outward in the planes of Cr{sub 2}O{sub 3} perpendicular to <0 0 1> and grow inward along <1 1 1> orientation of NiO.

  16. Effects of alloying Re and Ru in the edge-dislocation core of the Ni/Ni3Al interface

    Institute of Scientific and Technical Information of China (English)

    Wang Cong; Wang Chong-Yu

    2009-01-01

    Investigations of alloying Re and Ru in the [110](001) dislocation core of the Ni/Ni3Al interface were conducted within the framework of density functional theory. The energetic calculations show that both elements can stabilize the [110](001) dislocation core. In the dislocation core region,Re and Ru prefer to substitute for Ni on the site in the γ-phase. Re is easier to segregate into the dislocation core region as compared with Ru; it especially prefers to substitute for Ni on the γ-(Ni)l site.

  17. Two new [Ni(tren)2]2+ complexes: [Ni(tren)2]Cl2 and [Ni(tren)2]WS4.

    Science.gov (United States)

    Ellermeier, Jan; Stähler, Ralph; Bensch, Wolfgang

    2002-02-01

    Both title compounds, bis[tris(2-aminoethyl)amine]nickel(II) dichloride, [Ni(tren)(2)]Cl(2), (I), and bis[tris(2-aminoethyl)amine]nickel(II) tetrathiotungstate, [Ni(tren)(2)]WS(4), (II), contain the [Ni(tren)(2)](2+) cation [tren is tris(2-aminoethyl)amine, C(6)H(18)N(4)]. The tren molecule acts as a tridentate ligand around the central Ni atom, with the remaining primary amine group not bound to the central atom. In (I), Ni(2+) is located on a centre of inversion surrounded by one crystallographically independent tren molecule. In the [Ni(tren)(2)](2+) cation of (II), the Ni atom is bound to two crystallographically independent tren molecules. The Ni atoms in the [Ni(tren)(2)](2+) complexes are in a distorted octahedral environment consisting of six N atoms from the chelating tren molecules. The counter-ions are chloride anions in (I) and the tetrahedral [WS(4)](2-) anion in (II). Hydrogen bonding is observed in both compounds.

  18. Thermodynamic characterization of Ni3TeO6, Ni2Te3O8 and NiTe2O5

    Science.gov (United States)

    Dawar, Rimpi; Babu, R.; Ananthasivan, K.; Anthonysamy, S.

    2017-09-01

    Measurement of vapour pressure of TeO2(g) over the biphasic mixture Ni3TeO6 (s) + NiO(s) in the temperature range 1143-1272 K was carried out using transpiration-thermogravimetric technique (TTG). Gibbs energy of formation of Ni3TeO6 was obtained from the temperature dependence of vapour pressure of TeO2 (g) generated by the incongruent vapourisation reaction, Ni3TeO6 (s) → NiO(s) + TeO2 (g) + 1/2 O2 in the temperature range 1143-1272 K. An isoperibol type drop calorimeter was used to measure the enthalpy increments of Ni3TeO6, Ni2Te3O8 and NiTe2O5. Thermodynamic functions viz., heat capacity, entropy and Gibbs energy functions of these compounds were derived from the experimentally measured enthalpy increment values. Third-law analysis was carried out to ascertain absence of temperature dependent systematic errors in the measurement of vapour pressure of TeO2 (g). A value of -1265.1 ± 1.5 kJ mol-1 was obtained for ΔHf,298Ko (Ni3TeO6) using third-law analysis.

  19. Ni cycling in mangrove sediments from New Caledonia

    Science.gov (United States)

    Noel, V. S.; Morin, G.; Juillot, F.; Marchand, C.; Brest, J.; Bargar, J.; Munoz, M.; Ardo, S.; Brown, G. E.

    2014-12-01

    In New Caledonia, mangroves receive large inputs of lateritic materials eroded from massive ultramafic deposits enriched in Fe, Ni, Mn, Cr, and Co. Because of the major physicochemical gradients, especially redox gradients, that characterize these ecosystems, mineralogical transformations may influence the crystal-chemistry and bioavailability of Ni and its mobility towards a lagoon of over 20,000 km2. Bulk and spatially resolved chemical analyses by SEM-EDXS were coupled with Ni K-edge X-ray absorption fine structure (XAFS) spectroscopy analysis to characterize the vertical and lateral changes in Ni speciation across the intertidal zone of a mangrove forest in the Vavouto Bay (New Caledonia) where Ni concentrations range from 1000 to 5300 mg•kg-1. XAFS results indicate that phyllosilicates and goethite inherited from the eroded lateritic materials are the dominant Ni-bearing phases in the surface horizons of the mangrove sediments. They are fully preserved at depth in the dry and oxic salt flat area, located on the inland side of the coast. In contrast, beneath the vegetated Rhizophoras and Avicennias stands Ni-bearing goethites rapidly diminish with increasing depth in the anoxic horizons of the sediments, and pyrite and organic complexes become the dominant Ni-containing species. Moreover, Ni incorporation in pyrite is more developed in the sediments beneath the intermediate Avicennia stand than beneath the Rhizophora stand that is closest to the shore. Such lateral changes in Ni speciation may be related to reoxidation of Ni-bearing pyrites in the Rhizophora stand, which is subject to periodic alternation of reducing and oxidizing events due to tidal fluctuations. These major changes in Ni speciation could significantly influence Ni mobility across the interidal zone. Indeed, as estimated with respect to Ti concentration, which is taken as a geochemical invariant, Ni is found to be immobile in the salt flat, to accumulate beneath the Avicennia stand, and to

  20. Fe-Ni/NiFe2O4纳米复合颗粒的制备与磁性研究∗%The preparation and magnetic characterization of Fe-Ni/NiFe2 O4 nanocomposite particles

    Institute of Scientific and Technical Information of China (English)

    杨柳; 何峻; 安静; 赵栋梁

    2015-01-01

    结合共沉淀法和氢气还原法成功制备出Fe-Ni/NiFe2 O4纳米复合颗粒,所制备的纳米复合颗粒包含NiFe2 O4和 Fe-Ni 合金,其中 Fe-Ni 合金具有体心立方和面心立方两种结构。用 XRD 和 TEM对所得样品进行结构分析。用 SQUID 测量样品在室温时的磁滞回线,发现 Fe-Ni/NiFe2 O4纳米复合颗粒的矫顽力和饱和磁化强度与制备态 NiFe2 O4纳米颗粒相比随着退火时间的增加呈现出逐渐增加的趋势。为了进一步研究所制备的纳米复合颗粒的磁性特征,测量退火时间相同而退火温度不同的两个样品在零磁场冷却(ZFC)和带磁场冷却(FC)条件下的M-T 曲线。%NiFe2 O4 nanoparticles were synthesized by the co-precipitation method and Fe-Ni/NiFe2 O4 nanocom-posite particles were obtained by reducing NiFe2 O4 nanoparticles under hydrogen atmosphere.The as-prepared nanoparticles contain NiFe2 O4 with spinel phase and Fe-Ni alloy with body centered cubic and face-centered cu-bic phase.The structure and morphology of Fe-Ni/NiFe2 O4 nanocomposite particles were characterized by X-ray diffraction and transmission electron microscopy.The room temperature magnetization was analyzed by SQUID. We found that with the increase of annealing time,the coercivity and saturation magnetization of Fe-Ni/NiFe2 O4 nanocomposite particles exhibit a gradually increasing trend compared with as-quenched NiFe2 O4 nano-particles.In order to further study magnetic characteristics of as-prepared nanoparticles,we measured the M-T curves under the condition of zero field cooling (ZFC)and field cooling (FC)of two different samples which have different annealing temperature but the same annealing time.

  1. Anti-corrosive and anti-microbial properties of nanocrystalline Ni-Ag coatings

    Energy Technology Data Exchange (ETDEWEB)

    Raghupathy, Y.; Natarajan, K.A.; Srivastava, Chandan, E-mail: csrivastava@materials.iisc.ernet.in

    2016-04-15

    Graphical abstract: - Highlights: • Electrodeposition yielded phase-segregated, nanocrystalline Ni-Ag coatings. • Ni-Ag alloys exhibited smaller Ni crystals compared to pure Ni. • Ultra fine Ni grains of size 12–14 nm favoured Ni-Ag solid solution. • Nanocrystalline Ag resisted bio-fouling by Sulphate Reducing bacteria. • Ni-Ag outperformed pure Ni in corrosion and bio-corrosion tests. - Abstract: Anti-corrosive and anti-bacterial properties of electrodeposited nanocrystalline Ni-Ag coatings are illustrated. Pure Ni, Ni-7 at.% Ag, & Ni-14 at.% Ag coatings were electrodeposited on Cu substrate. Coating consisted of Ni-rich and Ag-rich solid solution phases. With increase in the Ag content, the corrosion resistance of the Ni-Ag coating initially increased and then decreased. The initial increase was due to the Ni-Ag solid solution. The subsequent decrease was due to the increased galvanic coupling between the Ag-rich and Ni-rich phases. For all Ag contents, the corrosion resistance of the Ni-Ag coating was higher than the pure Ni coating. Exposure to Sulphate Reducing Bacteria (SRB) revealed that the extent of bio-fouling decreased with increase in the Ag content. After 2 month exposure to SRB, the Ni-Ag coatings demonstrated less loss in corrosion resistance (58% for Ni-7 at.% Ag and 20% for Ni-14 at.% Ag) when compared pure Ni coating (115%).

  2. Evaluation of structure and mechanical properties of Ni-rich NiTi/Kapton composite film

    Energy Technology Data Exchange (ETDEWEB)

    Mohri, Maryam [Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran (Iran, Islamic Republic of); Nili-Ahmadabadi, Mahmoud [School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran (Iran, Islamic Republic of); PouryazdanPanah, Mohsen; Hahn, Horst [Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Joint Research Labaratory Nanomaterials, Technische Universität Darmstadt, Darmstadt (Germany)

    2016-06-21

    NiTi thin films are usually sputtered on silicon wafers by magnetron sputtering. But the systems composed of thin film on flexible polymeric substrate are used in many applications such as micro electro-mechanical systems (MEMS). Investigation on mechanical properties of thin films has attracted much attention due to their widespread applications. In this paper, the mechanical properties of 1 µm-thick crystallized Ni-49.2 at%Ti thin film alloy deposited by DC magnetron sputtering on Kapton substrate are investigated by using tensile test. The as-deposited thin films are in amorphous state, then for crystallization, the thin film was annealed at 450 °C for 30 min. Formation of the austenite phase after annealing was confirmed by X-ray diffractometry (XRD) and differential scanning calorimetry (DSC). The surface morphology of as deposited and crystallized thin films were examined by scanning electron microscopy (SEM). Stress-strain curves of the NiTi alloy thin film were obtained by subtracting of the stress-strain Kapton curves from the corresponding curves of the NiTi/Kapton composite. The XRD results revealed that the NiTi thin film deposited on the Kapton is austenitic and presents super-elastic effect at room temperature. This pseudo elastic effect leads to more recoverable strain in NiTi/Kapton composite film compared with Kapton foils on loading/unloading test. Furthermore, it was concluded that nanostructure of the NiTi thin film is responsible for remarkable improvement of ultimate tensile strength (1.4 GPa) at a strain of 30% compared with the bulk material.

  3. Niños y niñas como cuidadores familiares

    Directory of Open Access Journals (Sweden)

    María Rosa Estupiñán Aponte

    2015-01-01

    Full Text Available En el contexto familiar, el cuidado de otra persona por parte de niños y niñas constituye un terreno inexplorado tanto en su significado como en las implicaciones que podrían darse en el proceso. Aunque históricamente se ha asignado el cuidado familiar a las mujeres generando condiciones de inequidad, incrementada con los cambios sociales de los últimos tiempos, es necesario reconocer que en muchos hogares niños y niñas se han visto obligados a desempeñar esta labor sin la preparación ni las destrezas necesarias. Desde una perspectiva de género, el artículo busca evidenciar esta situación mediante la revisión de los abordajes que sobre el tema se han hecho en países de Europa y Norteamérica, así como el análisis de información obtenida a partir de las Encuestas de Hogares y Uso del Tiempo (EUT en algunos países de Latinoamérica. Se establece la forma como las problemáticas sociales inciden en las dinámicas, tipo de tareas y responsabilidades que deben asumir niños y niñas en los hogares, mostrando delgados límites entre la colaboración al interior de las familias, la transmisión cultural de roles y funciones y las actividades que podrían incidir negativamente en su crecimiento y el ejercicio de sus derechos.

  4. Facile synthesis of self-supported Ni2P nanosheet@Ni sponge composite for high-rate battery

    Science.gov (United States)

    Shi, F.; Xie, D.; Zhong, Y.; Wang, D. H.; Xia, X. H.; Gu, C. D.; Wang, X. L.; Tu, J. P.

    2016-10-01

    To meet the requirements for high-rate battery with desirable performance, a self-supported Ni2P@Ni sponge electrode is synthesized via simple steps, in which the Ni sponge substrate is synthesized by a one-pot hydrothermal method and the Ni2P nanosheets grown on the novel substrate are converted from Ni(OH)2 via a phosphorization reaction. This hybrid composite combines the 3D porous structure of Ni sponge and high capacity of Ni2P nanosheets, which exhibits lightweight, flexible and highly-conductive properties, resulting in an excellent specific capacity of 430.3 mAh g-1 at a current density of 1 A g-1 and remaining as high as 77.0% capacity even at 40 A g-1. More importantly, the Ni2P@Ni sponge//C cell exhibits the maximum energy density of 182.1 W h kg-1 at a power density of 205 W kg-1 along with superior capacity retention of 85.2% after 3000 cycles. It is suggested that the Ni2P nanosheet@ Ni sponge composite is a promising electrode material for high-rate batteries.

  5. Effect of Ni concentration on microstructure, magnetic and microwave properties of electrodeposited NiCoFe films

    Energy Technology Data Exchange (ETDEWEB)

    Phua, L.X., E-mail: g0700691@nus.edu.sg [Centre for Superconducting and Magnetic Materials, Department of Physics, National University of Singapore, 2 Science Drive 3, Singapore 117542 (Singapore); Phuoc, N.N. [Temasek Laboratories, National University of Singapore, 5A Engineering Drive 2, Singapore 117411 (Singapore); Ong, C.K. [Centre for Superconducting and Magnetic Materials, Department of Physics, National University of Singapore, 2 Science Drive 3, Singapore 117542 (Singapore)

    2012-12-05

    Highlights: Black-Right-Pointing-Pointer BCC crystallographic structure is gradually suppressed with increment of Ni content. Black-Right-Pointing-Pointer The M{sub s} and H{sub c} values show similar behavior with increase of Ni concentration. Black-Right-Pointing-Pointer The FMR frequency has a maximum value of 1.9 GHz at Ni concentration of 0.3. Black-Right-Pointing-Pointer Sufficient addition of Ni may lead to significant enhancement of film properties. - Abstract: The influence of Ni addition on the microstructure, magnetic properties and microwave characteristics of Ni{sub x}(Co{sub 0.5}Fe{sub 0.5}){sub 1-x} (x = 0-0.7 wt. ratio) films fabricated by electrodeposition technique was investigated. It is revealed by the characterization of an X-ray Diffractometer that the films show a mixture of both FCC and BCC structures and the BCC structure is gradually suppressed with increasing Ni concentration. The morphology study by Scanning Electron Microscopy shows that with the addition of Ni, the film surface becomes smoother and grain size is reduced. The saturation magnetization and coercivity values show a similar behavior with increased Ni concentration. The ferromagnetic resonance frequency is increased from 1.07 to 1.9 GHz with the increase of Ni concentration from 0 to 0.3 and is decreased upon further Ni concentration increment which was interpreted in terms of contribution of the stress of films.

  6. Microwave assisted synthesis and characterization of Ni/NiO nanoparticles as electrocatalyst for methanol oxidation in alkaline solution

    Science.gov (United States)

    Arunachalam, Prabhakarn; Ghanem, Mohamed A.; Al-Mayouf, Abdullah M.; Al-shalwi, Matar; Hamed Abd-Elkader, Omar

    2017-02-01

    Nickel/Nickel oxide (Ni/NiO) nanoparticles catalyst is prepared by microwave-assisted liquid-phase deposition using ethylene glycol (EG) and water mixture under atmospheric conditions. The physicochemical characterizations of the catalyst carried out by surface area analyzer, x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), electron microscopes measurements suggest the formation of crystalline nanoparticles structure of NiO. The surface area of Ni/NiO prepared using EG/water mixture reaches 70 m2 g-1 which is 2-fold enhsancement in surface area in comparison with NiO prepared in pure EG and an order of magnitude higher than that of bulk nickel prepared in pure water. The methanol electro-oxidation activity of the Ni/NiO nanoparticles obtained in EG/water mixture displayed more than 4-fold increase in oxidation current at 1.7 V versus RHE in comparison with NiO nanoparticles obtained in EG and 20-fold increase compared to bulk nickel catalyst concord with the enhancement of electro-active surface area. The results show the Ni/NiO nanoparticles produced by microwave assisted synthesis has superior activity for methanol oxidation in alkaline solution over the other nickel based catalysts and has potential for mass production.

  7. XAFS方法研究纳米非晶态NiB和NiP合金的结构

    Institute of Scientific and Technical Information of China (English)

    姜政; 杨宏伟; 陈栋梁; 闫文盛; 谢治; 韦世强

    2001-01-01

    不同退火温度处理后的纳米非晶态NiB和NiP合金催化剂XAFS和XRD的结果表明,在300℃温度退火后,纳米非晶态NiB合金晶化生成纳米晶Ni和晶态Ni3B中间态;纳米非晶态NiP合金直接晶化生成稳定的晶态NiNi3P。在500℃温度退火后,NiB和NiP样品都晶化为金属Ni,但NiB样品中的Ni原子周围的局域结构与金属Ni箔的几乎相同,而NiP样品由于Ni原于受到元素P的影响,生成的晶态Ni的结构有较大的畸变,结构与金属Ni相差很大。

  8. Influence of aging on damping behavior of TiNi/TiNi alloys synthesized by explosive welding

    Institute of Scientific and Technical Information of China (English)

    XING Ting-yong; ZHENG Yan-jun; CUI Li-shan; MI Xu-jun

    2009-01-01

    The influence of aging time,measuring frequency and strain amplitude on the internal friction of TiNi_(51)/TiNi_(50.2) sandwich composite was investigated.The DSC and internal friction measurements were employed to characterize the sample.The two internal friction peaks of the specimen were confirmed corresponding to the reverse transformation of TiNi_(51) and TiNi_(50.2) component,respectively.The internal friction as a function of the temperature at different measuring frequencies was presented and it was found that the height of both internal friction peaks increased with decreasing frequency; however,the increase corresponding to TiNi_(50.2) component was larger than that of TiNi_(51) component.Furthermore,the internal friction of the TiNi/TiNi composite alloy decreased with increasing the measuring strain amplitude.The height of internal friction peak of TiNi_(51) component increased with increasing the aging time,whereas that of the TiNi_(50.2) component did not change significantly.The increase in internal friction of TiNi_(51) appeared to be associated with the formation and growth of precipitate during the aging process.

  9. Role of Ni-tolerant Bacillus spp. and Althea rosea L. in the phytoremediation of Ni-contaminated soils.

    Science.gov (United States)

    Khan, Waheed Ullah; Yasin, Nasim Ahmad; Ahmad, Sajid Rashid; Ali, Aamir; Ahmed, Shakil; Ahmad, Aqeel

    2017-05-04

    In our current study, four nickel-tolerant (Ni-tolerant) bacterial species viz, Bacillus thuringiensis 002, Bacillus fortis 162, Bacillus subtilis 174, and Bacillus farraginis 354, were screened using Ni-contaminated media. The screened microbes exhibited positive results for synthesis of indole acetic acid (IAA), siderophore production, and phosphate solubilization. The effects of these screened microbes on Ni mobility in the soil, root elongation, plant biomass, and Ni uptake in Althea rosea plants grown in Ni-contaminated soil (200 mg Ni kg(-1)) were evaluated. Significantly higher value for water-extractable Ni (38 mg kg(-1)) was observed in case of Ni-amended soils inoculated with B. subtilis 174. Similarly, B. thuringiensis 002, B. fortis 162, and B. subtilis 174 significantly enhanced growth and Ni uptake in A. rosea. The Ni uptake in the shoots and roots of B. subtilis 174-inoculated plants enhanced up to 1.7 and 1.6-fold, respectively, as compared to that in the un-inoculated control. Bacterial inoculation also significantly improved the root and shoot biomass of treated plants. The current study presents a novel approach for bacteria-assisted phytoremediation of Ni-contaminated areas.

  10. Alignment of primary Al3Ni phases in hypereutectic Al-Ni alloys with various compositions under high magnetic fields

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Al-Ni hypereutectic alloys with various compositions were solidified under various magnetic field con- ditions to investigate the alignment of primary Al3Ni phases. The results showed that the application of high magnetic fields could improve the homogeneity of the primary Al3Ni phase distribution and induce the alignment of primary Al3Ni phases in the direction perpendicular to the magnetic field direction to form chain-like structures. However, the alignment was different from the orientation of the Al3Ni phases. Furthermore, the degree of the alignment decreased with the increasing concentration of Ni element. This can be attributed to the combination effects of high magnetic field and alloy composition on the concentration field around the crystallized primary Al3Ni crystals.

  11. Alignment of primary Al3Ni phases in hypereutectic AI-Ni alloys with various compositions under high magnetic fields

    Institute of Scientific and Technical Information of China (English)

    WANG Qiang; WANG ZhongYing; LIU Tie; WANG ChunJiang; ZHANG Chao; HE JiCheng

    2009-01-01

    Al-Ni hypereutectic alloys with various compositions were solidified under various magnetic field conditions to investigate the alignment of primary Al3Ni phases. The results showed that the application of high magnetic fields could improve the homogeneity of the primary Al3Ni phase distribution and induce the alignment of primary Al3Ni phases in the direction perpendicular to the magnetic field direction to form chain-like structures. However, the alignment was different from the orientation of the Al3Ni phases. Furthermore, the degree of the alignment decreased with the increasing concentration of Ni element. This can be attributed to the combination effects of high magnetic field and alloy composition on the concentration field around the crystallized primary Al3Ni crystals.

  12. Effect of Ni Core Structure on the Electrocatalytic Activity of Pt-Ni/C in Methanol Oxidation

    Directory of Open Access Journals (Sweden)

    Vladimir Linkov

    2013-07-01

    Full Text Available Methanol oxidation catalysts comprising an outer Pt-shell with an inner Ni-core supported on carbon, (Pt-Ni/C, were prepared with either crystalline or amorphous Ni core structures. Structural comparisons of the two forms of catalyst were made using transmission electron microscopy (TEM, X-ray diffraction (XRD and X-ray photoelectron spectroscopy (XPS, and methanol oxidation activity compared using CV and chronoamperometry (CA. While both the amorphous Ni core and crystalline Ni core structures were covered by similar Pt shell thickness and structure, the Pt-Ni(amorphous/C catalyst had higher methanol oxidation activity. The amorphous Ni core thus offers improved Pt usage efficiency in direct methanol fuel cells.

  13. Molecular Dynamics Study on Interfacial Energy and Atomic Structure of Ag/Ni and Cu/Ni Heterophase System

    Institute of Scientific and Technical Information of China (English)

    Haijiang LIU; Shaoqing WANG; An DU; Caibei ZHANG

    2004-01-01

    The results of molecular dynamics calculations on the interfacial energies and atomic structures of Ag/Ni and Cu/Ni interaces are presented. Calculation on Ag/Ni interfaces with low-index planes shows that those containing the (111) plane have the lowest energies, which is in agreement with the experiments. Comparing surface energy with interracial energy, it is found the order of the interfacial energies of Ag/Ni and Cu/Ni containing the planes fall in the same order as solid-vapor surface energies of Ag, Cu and Ni. In this MD simulation, the relaxed atomic structure and dislocation network of (110)Ag||(110)Ni interface are coincident to HREM observations.

  14. Stripe-to-bubble transition of magnetic domains at the spin reorientation of (Fe/Ni)/Cu/Ni/Cu(001)

    Energy Technology Data Exchange (ETDEWEB)

    Wu, J.; Choi, J.; Won, C.; Wu, Y. Z.; Scholl, A.; Doran, A.; Hwang, Chanyong; Qiu, Z.

    2010-06-09

    Magnetic domain evolution at the spin reorientation transition (SRT) of (Fe/Ni)/Cu/Ni/Cu(001) is investigated using photoemission electron microscopy. While the (Fe/Ni) layer exhibits the SRT, the interlayer coupling of the perpendicularly magnetized Ni layer to the (Fe/Ni) layer serves as a virtual perpendicular magnetic field exerted on the (Fe/Ni) layer. We find that the perpendicular virtual magnetic field breaks the up-down symmetry of the (Fe/Ni) stripe domains to induce a net magnetization in the normal direction of the film. Moreover, as the virtual magnetic field increases to exceed a critical field, the stripe domain phase evolves into a bubble domain phase. Although the critical field depends on the Fe film thickness, we show that the area fraction of the minority domain exhibits a universal value that determines the stripe-to-bubble phase transition.

  15. Combustion Synthesis of Ti-2B-Cu/Ni and 3Ti-2BN-Cu/Ni Bilayered Cermets

    Institute of Scientific and Technical Information of China (English)

    Weiping SHEN; Wenbin CAO; Changchun GE; E.H.Grigoryan; A.E.Sytschev; A.S.Rogachev

    2003-01-01

    The effects of Cu and Ni (x=0, 10, 20 and 40 wt pct) and compaction pressures (12, 24, 84 and 108 MPa)on combustion wave velocity and wave front shape for Ti-2B-Cu/Ni and 3Ti-2BN-Cu/Ni bilayered cermets were investigated by a video camera. Since the boiling point of Cu is lower, the wave velocities of specimens are slower.Due to the higher specific heat of Ni than that of Cu, the wave velocities of specimens was slowed down a lot with increasing the Ni diluent. The wave velocity differences of the specimens containing Ni are more than that of the bilayered specimens containing Cu. Wave velocities of the specimens containing Ni increased more than that of the specimens containing Cu when higher pressure was employed for green mixture. The more the wave velocity difference of the bilayer, the more curved the specimen.

  16. Crystalline NiCo2S4 nanotube array coated with amorphous NiCoxSy for supercapacitor electrodes.

    Science.gov (United States)

    Ding, Rui; Zhang, Mingyi; Yao, Yunhe; Gao, Hong

    2016-04-01

    Hierarchical NiCo2S4@NiCoxSy core/shell nanoarrays grown on carbon cloth were successfully synthesized via a two-step hydrothermal route and following an electrodeposition process. Compared with bare NiCo2S4, the electrochemical performance of NiCo2S4@NiCoxSy nanoarrays have been apparently improved, which shows areal capacitance as high as 3.9F/cm(2) at a constant current density of 1mA/cm(2). And the composite material exhibits excellent rate capability that a high areal capacitance of 2.9F/cm(2) is still retaining as the current density increase to 50mA/cm(2). The superior electrochemical performance can be attributed to the reasonably designed core/shell hierarchical structure of NiCo2S4@NiCoxSy nanoarrays, which would be promising for high-performance supercapacitor materials.

  17. Magnetic-field-tuned charge density wave in SmNiC2 and NdNiC2

    Science.gov (United States)

    Lei, Hechang; Wang, Kefeng; Petrovic, C.

    2017-02-01

    We report magnetic field tuned competition between magnetic order and charge density wave (CDW) states in SmNiC2 and NdNiC2 polycrystals. The destruction of CDW can be observed not only in SmNiC2 below ferromagnetic (FM) but also in NdNiC2 below antiferromagnetic (AFM) transition temperature. Moreover, the CDW states near magnetic transition temperatures can be tuned by the magnetic field for both compounds. Magnetic-field induced FM state in NdNiC2 is more effective in weakening the CDW than the AFM state at temperatures near Neel temperature T N but both ordering states have the same effect on CDW below T N. The interplay between magnetic and CDW states in SmNiC2 and NdNiC2 may be different, suggesting that these materials are good models to study correlations between magnetic and CDW wave order.

  18. Effect of Paste Composition on the Microstructure of NiO Electrode%浆料成分对NiO电极微观结构的影响

    Institute of Scientific and Technical Information of China (English)

    王敏; 夏风; 王晓昳; 鄢文超; 肖建中

    2012-01-01

    NiO paste, Ni paste and Ni/YSZ paste were used to prepare NiO sensing electrodes, respectively. Ni/YSZ paste was fabricated by adding 15 vol% YSZ powder into Ni paste. The results indicated that the NiO electrodes made by NiO paste using ordinary sintering are compact and contained a lot of cracks. By contrast, the NiO electrodes and NiO/YSZ composite electrodes prepared by Ni paste and Ni/YSZ paste adopting reaction sintering, respectively, are porous and no cracks are observed. The addition of YSZ in pastes have a strong particle refining effect on NiO grains, enhance interface adhesion between NiO electrode and YSZ electrolyte and increase the amount and length of three phase boundary.%分别采用NiO浆料、Ni浆料和Ni/YSZ浆料制备NiO敏感电极.其中Ni/YSZ浆料是由在Ni浆料中添加15vol% YSZ粉末制备的.结果表明,采用NiO浆料普通烧结得到的NiO电极致密且有裂纹;采用Ni浆料和Ni/YSZ浆料反应烧结分别制备的NiO电极和NiO/YSZ复合电极则疏松多孔且无裂纹.浆料中添加的YSZ不仅能够细化NiO电极晶粒,同时能增强电极和基底的界面附着,增加三相界面的数量和长度.

  19. Incoherent Ag islands growth on Ni(100)

    Science.gov (United States)

    Marie, J. B.; Braems, I.; Bellec, A.; Chacon, C.; Creuze, J.; Girard, Y.; Gueddani, S.; Lagoute, J.; Repain, V.; Rousset, S.

    2017-02-01

    Growth of two-dimensional superstructure and island morphologies of silver atoms evaporated on a nickel (100) surface are studied by scanning tunneling microscopy. Near-equilibrium islands form at moderate annealing temperature (lower than 500 K) and present two kinds of morphologies. While they share a common monolayer c(2×8) superstructure, two distinct populations of islands coexist: rounded islands grown on the surface and spindle-shaped islands grown inside the Ni surface. The latter present a clear saturation of their density with increasing coverage. These shapes are mostly dominated by boundary energies as confirmed by a simple two-dimensional Wulff model whose parameters are derived using molecular statics simulations. Further annealing to 700 K leads to long Ag strips decorating the Ni step edges.

  20. Interface stress in Au/Ni multilayers

    DEFF Research Database (Denmark)

    Schweitz, K.O.; Böttiger, J.; Chevallier, J.

    2000-01-01

    The effect of intermixing on the apparent interface stress is studied in -textured dc-magnetron sputtered Au/Ni multilayers by use of two methods commonly used for determining interface stress. The method using profilometry and in-plane x-ray diffraction does not take intermixing...... into account and yields an apparent interface stress of -8.46 +/- 0.99 J m(-2). However, observed discrepancies between model calculations and measured high-angle x-ray diffractograms indicate intermixing, and by use of the profilometry and sin(2) psi method the real interface stress value of -2.69 +/- 0.43 J...... to be inapplicable to interface stress determinations in systems exhibiting a modulation period-dependent stress-free lattice parameter. Finally, a deviation of the interface stress in the Au/Ni sample with the smallest modulation period as compared to specimens with larger bilayer lengths is observed...

  1. Ni{sub 3}Al technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Sikka, V.K.; Viswanathan, S.; Santella, M.L. [Oak Ridge National Lab., TN (United States)] [and others

    1997-04-01

    Ductile Ni{sub 3}Al and Ni{sub 3}Al-based alloys have been identified for a range of applications. These applications require the use of material in a variety of product forms such as sheet, plate, bar, wire, tubing, piping, and castings. Although significant progress has been made in the melting, casting, and near-net-shape forming of nickel aluminides, some issues still remain. These include the need for: (1) high-strength castable composition for many applications that have been identified; (2) castability (mold type, fluidity, hot-shortness, porosity, etc.); (3) weld reparability of castings; and (4) workability of cast or powder metallurgy product to sheet, bar, and wire. The four issues listed above can be {open_quotes}show stoppers{close_quotes} for the commercial application of nickel aluminides. This report describes the work completed to address some of these issues during FY 1996.

  2. Ni{sub 3}Al technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Sikka, V.K.; Santella, M.L.; Alexander, D.J. [Oak Ridge National Laboratory, TN (United States)] [and others

    1995-05-01

    Ductile Ni{sub 3}Al and Ni{sub 3}Al-based alloys have been identified for a range of applications. These applications require the use of material in a variety of product forms such as sheet, plate, bar, tubing, piping, and castings. Although significant progress has been made in the melting, casting, and near-net-shape forming of nickel aluminides, some issues still remain. These include the need for (1)high-strength castable composition for turbochargers, furnace furniture, and hot-die applications; (2) castability (fluidity, hot-shortness, porosity, etc.); (3) weld reparability of castings; and (4) hot fabricability of cast ingots. All of the issues listed above can be {open_quotes}show stoppers{close_quotes} for the commercial application of nickel aluminides. This report describes work completed to address some of these issues during the fourth quarter of FY 1994.

  3. Internal chlorination of Ni-Cr alloys

    Energy Technology Data Exchange (ETDEWEB)

    Berztiss, D.; Hennesen, K.; Grabke, H.J. [Max-Planck-Institut fuer Eisenforschung GmbH, Duesseldorf (Germany)

    1998-12-31

    In contrast to internal oxidation, sulfidation and carburization, very little information is available regarding internal chlorination, especially diffusion of chlorine in metallic alloys. This paper describes results of experiments on Ni-Cr alloys (<10 wt% Cr) exposed in an atmosphere containing radioactive HCl. The diffusion of chlorine in the alloy can be determined by measurement of residual {beta}-activity from the sample surface. Successively thin layers (0.5-10 {mu}m) of the alloy were removed by lapping and the surface activity was measured to obtain a depth profile. Both single and polycrystalline materials were tested. Through this work it should be determined if there is in fact solubility and diffusion of chlorine in Ni-based alloys as some authors have proposed or if the ingress of chlorine is mainly a grain boundary phenomenon. (orig.)

  4. Resiliencia en Niños

    OpenAIRE

    Norma Ivonne González Arratia Lopez Fuentes; José Luis Valdez Medina

    2007-01-01

    Con el objetivo de acercarse al constructo teórico de resiliencia, y desde la propuesta de Grotberg (1995a) y Melillo (2003), del modelo donde es posible caracterizar a un niño resiliente a través de la posesión de condiciones que en el lenguaje se expresan diciendo: Yo tengo , Yo soy , Yo estoy , Yo puedo , es que se procedió a hacer la aplicación de la técnica de Redes Semánticas Naturales a 400 niños de ambos sexos, de 6° año de primaria de escuelas públicas y privadas de la ciudad de ...

  5. Niño, inteligencia, devenir

    OpenAIRE

    Galindo Olaya, Juan Diego

    2016-01-01

    En este artículo nos proponemos mostrar cómo actúan en conjunto el plano de organización y el plano de consistencia que conforman el mapa del pensamiento en la escuela, según el cual, se puede afirmar que el pensamiento se escapa a la inhibición, la interpretación y la sujeción que provoca su traducción en términos de inteligencia, cuando, como resultado de la experimentación, se gesta un encuentro indeterminado con fuerzas que pueden conducir al devenir-niño del niño en la escuela. En este s...

  6. Ni-Based Solid Oxide Cell Electrodes

    DEFF Research Database (Denmark)

    Mogensen, Mogens Bjerg; Holtappels, Peter

    2013-01-01

    This paper is a critical review of the literature on nickel-based electrodes for application in solid oxide cells at temperature from 500 to 1000 _C. The applications may be fuel cells or electrolyser cells. The reviewed literature is that of experimental results on both model electrodes...... and practical composite cermet electrodes. A substantially longer three-phase boundary (TPB) can be obtained per unit area of cell in such a composite of nickel and electrolyte material, provided that two interwoven solid networks of the two solid and one gaseous phases are obtained to provide a three...... - dimensional TPB throughout the electrode volume. Variables that are used for controlling the properties of Ni-cermet electrodes are: (1) Ni/YSZ volume ratio, and (2) porosity and particle size distribution, which mainly affected by raw materials morphology, application methods and production parameters...

  7. Thermodynamic characterization of NiAl

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, C.A. [Battelle, 505 King Avenue, Columbus, OH 43201 (United States)], E-mail: alexandc@Battelle.org; Ogden, J.S.; Risser, S.M.; Wood, Van E. [Battelle, 505 King Avenue, Columbus, OH 43201 (United States)

    2009-05-15

    Thermodynamic properties of the high-stability intermetallic compound nickel aluminide, NiAl, have been determined from mass-spectrometric, weight-loss effusion, and calorimetric measurements, using samples from a single preparation with a composition determined to be Ni{sub 0.986}Al{sub 1.014}. Per mole of NiAl molecules, the specific heat capacity at room temperature of 298 K is 48.54 J . K{sup -1} . mol{sup -1}, with a linear temperature dependence of +0.0104 J . K{sup -2} . mol{sup -1}. At the same temperature, the enthalpy of formation is -133.7 kJ . mol{sup -1}, the entropy is about 53.8 J . K{sup -1} . mol{sup -1} and the enthalpy difference between room temperature and absolute zero is 7.97 kJ . mol{sup -1}. The Gibbs free-energy is -130.2 kJ . mol{sup -1} at T = 298 K, with a linear temperature dependence of +5.04 J . K{sup -1} . mol{sup -1}. The Debye temperature is 452 K, while the electronic density-of-states at the Fermi-level is about 0.29 states per eV-atom. The NiAl{sup +} ions were observed in the high-temperature mass spectra. Pressures for the gas at these temperatures were estimated and used with the results of quantum-mechanical calculations of total energy, specific heat, and entropy to calculate free-energy functions for the gas. These and additional results are compared with other measurements and discussed in terms of current theories of the electronic and structural properties of the compound.

  8. Participar como niña o niño en el mundo social

    Directory of Open Access Journals (Sweden)

    Silvia Paulina Díaz

    2010-01-01

    Full Text Available En este artículo presento la participación como resultado de un trabajo investigativo realizado durante el año 2007, con niños y niñas escolarizados habitantes de la ciudad de Medellín, Colombia, cuyo objetivo fue analizar las representaciones sociales que ellos y ellas comparten sobre el ejercicio ciudadano. El análisis de la información tiene como ejes fundamentales, la salud colectiva, la sociología de la infancia y la participación en la niñez, en una aproximación que se realiza desde un enfoque cualitativo y etnográfico. En los hallazgos, sobresale cómo las niñas y niños se muestran preparados para ejercer su derecho a la participación como aspecto de sus vidas que se haría posible dentro del marco normativo existente, pero que aún no es asumido en prácticas sociales que los incluyan.

  9. Participar como niña o niño en el mundo social

    Directory of Open Access Journals (Sweden)

    Silvia Paulina Díaz

    2010-10-01

    Full Text Available En este artículo presento la participación como resultado de un trabajo investigativo realizado durante el año 2007, con niños y niñas escolarizados habitantes de la ciudad de Medellín, Colombia, cuyo objetivo fue analizar las representaciones sociales que ellos y ellas comparten sobre el ejercicio ciudadano. El análisis de la información tiene como ejes fundamentales, la salud colectiva, la sociología de la infancia y la participación en la niñez, en una aproximación que se realiza desde un enfoque cualitativo y etnográfico. En los hallazgos, sobresale cómo las niñas y niños se muestran preparados para ejercer su derecho a la participación como aspecto de sus vidas que se haría posible dentro del marco normativo existente, pero que aún no es asumido en prácticas sociales que los incluyan.

  10. Resistance behaviour and interdiffusion of layered CuNi-NiCr films

    Energy Technology Data Exchange (ETDEWEB)

    Brueckner, W. [Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany); Schumann, J. [Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany); Baunack, S. [Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany); Pitschke, W. [Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany); Knuth, T. [Microtech GmbH, Teltow (Germany)

    1995-03-15

    On the basis of sputtered NiCr/CuNi/NiCr triple layers and multilayers, investigations of the electrical resistance R and its temperature coefficient TCR, as well as of the concentration depth profiles and of the temperature dependence of the lattice parameter have been carried out to study the influences of the interfaces in the as-deposited state as well as annealed ones. Furthermore, the temperature dependence of the film stress has been considered. As to the resistance, the influence of the diffusion zone can be described by a parallel resistor R{sub i} having {Delta}TCR{sub i}. These quantities are dependent on both deposition and annealing and were determined for the two configurations on silicon wafers in the as-deposited state as well as in the 300 C annealed one. The AES investigations show distinct interdiffusion effects after annealing above 300 C. The Ni impoverishment observed in the CuNi results in a lattice parameter decrease. The film stress is only slightly influenced by interfacial effects. ((orig.))

  11. Theoretical Study of CO Adsorption on Ni(111), Pt(111) and Pt/Ni(111) Surfaces

    Science.gov (United States)

    Cabeza, G. F.; Castellani, N. J.; Légaré, P.

    CO adsorption on a pseudomorphic Pt overlayer supported by Ni(111) has been studied with the use of extended Huckel calculations. Experimental information on the pure Pt(111) and Ni(111) single crystals was employed to select a consistent parameter set for our bimetallic system. This gives a good description of the chemisorption bond changes between the various systems considered in our study. The CO chemisorption energy on Pt/Ni(111) was found to be lowered in comparison with Pt(111) and Ni(111), in good agreement with experimental data on Pt-rich Pt-Ni surface alloys. This observation could be justified by the electronic changes of the Pt states (valence band broadening and decreasing density at the Fermi level). Indeed, they induce, in comparison with the pure substrates, a repulsion between Pt and CO although the 2π* population of the chemisorbed molecule increases. This points to the necessity of going beyond arguments based on an analysis of the 5σ donation and 2π* backdonation for a complete description of the chemisorption bond.

  12. Multifunction of Ni/Ag Nanocompound Fluid

    Directory of Open Access Journals (Sweden)

    Mu-Jung Kao

    2013-01-01

    Full Text Available An arc-submerged nanoparticle synthesis system (ASNSS is proposed and developed for fabricating Ni/Ag nanocompound fluid. In the development process, the positive and negative electrodes in the system are Ni and Ag, respectively. Applied electrical energy then produces heating source by generating an adequate arc with a high temperature that can melt and vaporize the two electrodes. The nanocompound fluid that is generated by the synthesis system is analyzed by morphological analysis, Zeta potential analysis, heat conductivity analysis, magnetic characteristic analysis, and UV-Vis absorption spectra analysis. Experimental results show that increasing the concentration of added particles and the higher temperature can be helpful to the enhancement of thermal conductivity. The Ni/Ag nanofluid not only preserves the magnetic character of the nickel and the ability of silver to absorb visible light but also enhances the thermal conductivity. The absorption occurs at 406 nm wavelength (redshift from 396 nm to 406 nm, which means that, under the excitement of visible light range (400~700 nm, it can let more easy electrons jump to the conductivity zone from the valence electron zone.

  13. NiTi superelasticity via atomistic simulations

    Science.gov (United States)

    Chowdhury, Piyas; Ren, Guowu; Sehitoglu, Huseyin

    2015-12-01

    The NiTi shape memory alloys (SMAs) are promising candidates for the next-generation multifunctional materials. These materials are superelastic i.e. they can fully recover their original shape even after fairly large inelastic deformations once the mechanical forces are removed. The superelasticity reportedly stems from atomic scale crystal transformations. However, very few computer simulations have emerged, elucidating the transformation mechanisms at the discrete lattice level, which underlie the extraordinary strain recoverability. Here, we conduct breakthrough molecular dynamics modelling on the superelastic behaviour of the NiTi single crystals, and unravel the atomistic genesis thereof. The deformation recovery is clearly traced to the reversible transformation between austenite and martensite crystals through simulations. We examine the mechanistic origin of the tension-compression asymmetries and the effects of pressure/temperature/strain rate variation isolatedly. Hence, this work essentially brings a new dimension to probing the NiTi performance based on the mesoscale physics under more complicated thermo-mechanical loading scenarios.

  14. Electric Monopole Transition Strengths in 62Ni

    Science.gov (United States)

    Evitts, L. J.; Garnsworthy, A. B.; Kibédi, T.; Moukaddam, M.; Alshahrani, B.; Eriksen, T. K.; Holt, J. D.; Hota, S. S.; Lane, G. J.; Lee, B. Q.; McCormick, B. P.; Palalani, N.; Reed, M. W.; Stroberg, S. R.; Stuchbery, A. E.

    2016-09-01

    Excited states in 62Ni were populated with a (p, p') reaction using the 14UD Pelletron accelerator at the Australian National University. Electric monopole transition strengths, ρ2(E0), were measured through simultaneous detection of the internal conversion electrons and γ rays emitted from the de-excitation of populated states, using the Super-e spectrometer coupled with a germanium detector. The strength of the 02+ to 01+ transition has been measured to be 77-34+23 × 10-3 and agrees with previously reported values. Upper limits have been placed on the 03+ to 01+ and 03+ to 02+ transitions. The measured ρ2(E0) value of the 22+ to 21+ transition in 62Ni has been measured for the first time and found to be one of the largest ρ2(E0) values measured to date in nuclei heavier than Ca. The low-lying states of 62Ni have previously been classified as one- and two-phonon vibrational states based on level energies. The measured electric quadrupole transition strengths are consistent with this interpretation. However as electric monopole transitions are forbidden between states which differ by one phonon number, the simple harmonic quadrupole vibrational picture is not suffcient to explain the large ρ2(E0) value for the 22+ to 21+ transition.

  15. Electric Monopole Transition Strengths in 62Ni

    Directory of Open Access Journals (Sweden)

    Evitts L. J.

    2016-01-01

    Full Text Available Excited states in 62Ni were populated with a (p, p’ reaction using the 14UD Pelletron accelerator at the Australian National University. Electric monopole transition strengths, ρ2(E0, were measured through simultaneous detection of the internal conversion electrons and γ rays emitted from the de-excitation of populated states, using the Super-e spectrometer coupled with a germanium detector. The strength of the 02+ to 01+ transition has been measured to be 77−34+23 × 10−3 and agrees with previously reported values. Upper limits have been placed on the 03+ to 01+ and 03+ to 02+ transitions. The measured ρ2(E0 value of the 22+ to 21+ transition in 62Ni has been measured for the first time and found to be one of the largest ρ2(E0 values measured to date in nuclei heavier than Ca. The low-lying states of 62Ni have previously been classified as one- and two-phonon vibrational states based on level energies. The measured electric quadrupole transition strengths are consistent with this interpretation. However as electric monopole transitions are forbidden between states which differ by one phonon number, the simple harmonic quadrupole vibrational picture is not suffcient to explain the large ρ2(E0 value for the 22+ to 21+ transition.

  16. Laser ablation of Al-Ni alloys and multilayers

    Science.gov (United States)

    Roth, Johannes; Trebin, Hans-Rainer; Kiselev, Alexander; Rapp, Dennis-Michael

    2016-05-01

    Laser ablation of Al-Ni alloys and multilayers has been studied by molecular dynamics simulations. The method was combined with a two-temperature model to describe the interaction between the laser beam, the electrons, and the atoms. As a first step, electronic parameters for the alloys had to be found and the model developed originally for pure metals had to be generalized to multilayers. The modifications were verified by computing melting depths and ablation thresholds for pure Al and Ni. Here known data could be reproduced. The improved model was applied to the alloys Al_3Ni, AlNi and AlNi_3. While melting depths and ablation thresholds for AlNi behave unspectacular, sharp drops at high fluences are observed for Al_3Ni and AlNi_3. In both cases, the reason is a change in ablation mechanism from phase explosion to vaporization. Furthermore, a phase transition occurs in Al_3Ni. Finally, Al layers of various thicknesses on a Ni substrate have been simulated. Above threshold, 8 nm Al films are ablated as a whole while 24 nm Al films are only partially removed. Below threshold, alloying with a mixture gradient has been observed in the thin layer system.

  17. Fabrications of High-Capacity Alpha-Ni(OH2

    Directory of Open Access Journals (Sweden)

    Kwo-Hsiung Young

    2017-03-01

    Full Text Available Three different methods were used to produce α-Ni(OH2 with higher discharge capacities than the conventional β-Ni(OH2, specifically a batch process of co-precipitation, a continuous process of co-precipitation with a phase transformation step (initial cycling, and an overcharge at low temperature. All three methods can produce α-Ni(OH2 or α/β mixed-Ni(OH2 with capacities higher than that of conventional β-Ni(OH2 and a stable cycle performance. The second method produces a special core–shell β-Ni(OH2/α-Ni(OH2 structure with an excellent cycle stability in the flooded half-cell configuration, is innovative and also already mass-production ready. The core–shell structure has been investigated by both scanning and transmission electron microscopies. The shell portion of the particle is composed of α-Ni(OH2 nano-crystals embedded in a β-Ni(OH2 matrix, which helps to reduce the stress originating from the lattice expansion in the β-α transformation. A review on the research regarding α-Ni(OH2 is also included in the paper.

  18. A Novel Processing Route for Ni-doped Alumina Composites

    Institute of Scientific and Technical Information of China (English)

    JING Mao-xiang; SHEN Xiang-qian; ZHOU Jian-xin; LI Dong-hong; LI Wang-xing

    2006-01-01

    Alumina-based composites containing 0-15wt% Ni metallic phase were produced by hot press-sintering Ni-coated alumina powders. The Ni-coated alumina powders were prepared by the aqueous heterogeneous precipitation of alumina micro-powders and nickel sulfate salt followed by reduction process. The microstructural features and dispersion of Ni phase in Ni-coated alumina powders and the subsequent alumina-Ni cermets were investigated using scanning electron microscope (SEM), X-ray diffractometer (XRD), and transmission electron microscope (TEM). The relative density of the hot press-sintered composites was measured with the Archimedes' method while the fracture strength and the fracture toughness were defined with the three-point bending method and the micro-indentation fracture method. In the formation of alumina-Ni cermets from sintered Ni-coated alumina powders, Ni phase to some extent limits the densification rate and stifles the coarsening and growing process of alumina grains. The Ni phase is found to be located at the interfaces and the triple-joint junctions of alumina grains which results into alteration of the fracture mode of alumina and its increased fracture strength and fracture toughness if compared with monolithic alumina.

  19. Microporous Ni@NiO nanoparticles prepared by chemically dealloying Al3Ni2@Al nanoparticles as a high microwave absorption material

    Science.gov (United States)

    Pang, Yu; Xie, Xiubo; Li, Da; Chou, Wusheng; Liu, Tong

    2017-03-01

    The Al3Ni2@Al nanoparticles (NPs) were prepared from Ni45Al55 master alloy by hydrogen plasma-metal reaction method, and were subsequently dealloyed to produce porous Ni@NiO NPs of 36 nm. The pore size ranges from 0.7 to 1.6 nm, leading to large specific surface area of 69.5 m2/g and big pore volume of 0.507 cc/g. The saturation magnetization (MS) and coercivity (HC) of the microporous Ni@NiO NPs are 11.5 emu/g and 5.2 Oe. They exhibit high microwave absorption performance with a minimum reflection coefficient (RC) of -86.9 dB and an absorption bandwidth of 2.6 GHz (RC≤-10 dB) at thickness of 4.5 mm. The enhanced microwave absorption properties are attributed to the synergistic effect of the magnetic Ni core and dielectric NiO shell, and the micropore architecture. The NPs with micropore morphology and core/shell structure open a new way to modify the microwave absorption performance.

  20. Spray Forming of NiTi and NiTiPd Shape-Memory Alloys

    Science.gov (United States)

    Mabe, James; Ruggeri, Robert; Noebe, Ronald

    2008-01-01

    In the work to be presented, vacuum plasma spray forming has been used as a process to deposit and consolidate prealloyed NiTi and NiTiPd powders into near net shape actuators. Testing showed that excellent shape memory behavior could be developed in the deposited materials and the investigation proved that VPS forming could be a means to directly form a wide range of shape memory alloy components. The results of DSC characterization and actual actuation test results will be presented demonstrating the behavior of a Nitinol 55 alloy and a higher transition temperature NiTiPd alloy in the form of torque tube actuators that could be used in aircraft and aerospace controls.