WorldWideScience

Sample records for ni pd pt

  1. Geometric structures of thin film: Pt on Pd(110) and NiO on Ni(100)

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Oden L. [Iowa State Univ., Ames, IA (United States)

    1993-07-01

    This thesis is divided into 3 papers: dynamical low-energy electron- diffraction investigation of lateral displacements in topmost layer of Pd(110); determination of (1x1) and (1x2) structures of Pt thin films on Pd(110) by dynamical low-energy electron-diffraction analysis; and structural determination of a NiO(111) film on Ni(100) by dynamical low-energy electron-diffraction analysis.

  2. The Electrochemical Atomic Layer Deposition of Pt and Pd nanoparticles on Ni foam for the electrooxidation of alcohols

    CSIR Research Space (South Africa)

    Modibedi, RM

    2012-10-01

    Full Text Available Electrodeposition of Pt and Pd metal by surface limited redox replacement reactions was performed using the electrochemical atomic layer deposition. Carbon paper and Ni foam were used as substrates for metal deposition. Supported Pt and Pd...

  3. Effective-medium calculations for hydrogen in Ni, Pd, and Pt

    DEFF Research Database (Denmark)

    Christensen, Ole Bøssing; Stoltze, Per; Jacobsen, Karsten Wedel

    1990-01-01

    The effective-medium theory is applied to a study of the energetics of the hydrides of Ni, Pd, and Pt, stressing the properties of PdHθ for 0≤θ≤1. The calculated heat of solution and the heat of hydride formation for the three systems agree very well with experiment. We determine the favored...... structure for PdHθ by calculating the total energy and lattice expansion of different configurations. Vibrational frequencies and diffusion barriers of H in Pd are also treated. A simple and transparent physical picture of the hydrogen-metal interaction is developed. From the calculated energetics we make...... a model calculation of the phase diagram of hydrogen in palladium in qualitative agreement with experiment. On this basis we propose a new explanation of the peculiarities of the Pd-H system....

  4. Effect of nanoparticle (Pd, Pd/Pt, Ni deposition on high temperature hydrogenation of Ti-V alloys in gaseous flow containing CO

    Directory of Open Access Journals (Sweden)

    S. Suwarno

    2017-02-01

    Full Text Available The hydrogenation properties of Ti-V hydrides coated with nanoparticles have been studied in gaseous mixtures of argon and hydrogen with and without additions of 1% CO. Nanoparticles of Pd, Ni, and co-deposited Pd/Pt with particle sizes of ~30–60 nm were formed by electroless deposition on the hydride surfaces. The alloy resistance to CO could be significantly improved by particle deposition. Large amounts of hydrogen were absorbed in a CO-containing gas when Ni and Pd/Pt deposition had been applied, while pure Pd deposition had no positive effect. Ni was found to have a stronger effect than those of Pd/Pt and Pd, possibly because of the size effect of Ni nanoparticles.

  5. Atomistic modeling of ternary additions to NiTi and quaternary additions to Ni-Ti-Pd, Ni-Ti-Pt and Ni-Ti-Hf shape memory alloys

    Energy Technology Data Exchange (ETDEWEB)

    Mosca, H.O., E-mail: hmosca@cnea.gov.ar [Gcia. Investigacion y Aplicaciones, CNEA, Av. Gral Paz 1499, B1650KNA San Martin (Argentina); GCMM, UTN, FRG Pacheco, Av. H. Yrigoyen 288, Gral. Pacheco (Argentina); Bozzolo, G. [Loyola University Maryland, 4501 N. Charles St., Baltimore, MD 21210 (United States); Grosso, M.F. del [Gcia. Investigacion y Aplicaciones, CNEA, Av. Gral Paz 1499, B1650KNA San Martin (Argentina); GCMM, UTN, FRG Pacheco, Av. H. Yrigoyen 288, Gral. Pacheco (Argentina); Consejo Nacional de Investigaciones Cientificas y Tecnicas, CONICET (Argentina)

    2012-08-15

    The behavior of ternary and quaternary additions to NiTi shape memory alloys is investigated using a quantum approximate method for the energetics. Ternary additions X to NiTi and quaternary additions to Ni-Ti-Pd, Ni-Ti-Pt, and Ni-Ti-Hf alloys, for X=Au, Pt, Ir, Os, Re, W, Ta,Ag, Pd, Rh, Ru, Tc, Mo, Nb, Zr, Zn, Cu, Co, Fe, Mn, V, Sc, Si, Al and Mg are considered. Bulk properties such as lattice parameter, energy of formation, and bulk modulus of the B2 alloys are studied for variations due to the presence of one or two simultaneous additives.

  6. The Sticking Probability for Hydrogen on Ni, Pd, and Pt at a Hydrogen pressure of 1 bar

    DEFF Research Database (Denmark)

    Johansson, Martin; Lytken, Ole; Chorkendorff, Ib

    2007-01-01

    A technique for measurements of the sticking probability of hydrogen on metal surfaces at high (ambient) pressure is described. As an example, measurements for Ni, Pd and Pt at a hydrogen pressure of 1 bar and temperatures between 40 and 200 degrees C are presented. The sticking probabilities...

  7. Martensitic transformation in Heusler alloys Mn2YIn (Y=Ni, Pd and Pt): Theoretical and experimental investigation

    International Nuclear Information System (INIS)

    Luo, Hongzhi; Liu, Bohua; Xin, Yuepeng; Jia, Pengzhong; Meng, Fanbin; Liu, Enke; Wang, Wenhong; Wu, Guangheng

    2015-01-01

    The martensitic transformation and electronic structure of Heusler alloys Mn 2 YIn (Y=Ni, Pd, Pt) have been investigated by both first-principles calculation and experimental investigation. Theoretical calculation reveals that, the energy difference ΔE between the tetragonal martensitic phase and cubic austenitic phase increases with Y varying from Ni to Pt in Mn 2 YIn. Thus a structural transition from cubic to tetragonal is most likely to happen in Heusler alloy Mn 2 PtIn. A single Heusler phase can be obtained in both Mn 2 PtIn and Mn 2 PdIn. A martensitic transformation temperature of 615 K has been identified in Mn 2 PtIn. And in Mn 2 PdIn, the austenitic phase is stable and no martensitic transformation is observed till 5 K. This indicates there may exist a positive relation between ΔE and martensitic transformation temperature. Calculated results show that Mn 2 YIn are all ferrimagnets in both austenitic and martensitic phases. The magnetic properties are mainly determined by the antiparallel aligned Mn spin moments. These findings can help to develop new FSMAs with novel properties. - Highlights: • Positive relation between ΔE and martensitic transformation temperature has been observed. • Heusler alloy Mn 2 PdIn has been synthesized successfully and investigated. • Martensitic transformation in Heusler alloys can be predicted by first -principles calculations

  8. Stable structures and potential energy surface of the metallic clusters: Ni, Cu, Ag, Au, Pd, and Pt

    Science.gov (United States)

    Wu, Xia; Sun, Yan

    2017-06-01

    Metallic clusters have been widely studied due to their special electrical, optical, and catalytic properties. The many-body Gupta potential is applied to describe the interatomic interaction of Ni, Cu, Ag, Au, Pd, and Pt clusters, and their global minimal structures within 100 atoms are optimized using dynamic lattice searching (DLS) method. The configurational distribution of global minima is analyzed, and the geometrical difference among these clusters is demonstrated. Results show that the dominant motif of Ni and Cu clusters is the icosahedron, and in Ag and Au clusters the number of decahedra is slightly larger than that of the icosahedra. However, more face-centered cubic (fcc), stacking fault fcc, and amorphous structures are formed in Au clusters than in Ag clusters. Furthermore, the main motif of Pd and Pt clusters is the decahedron. In particular, Ni98 adopts a Leary tetrahedral motif, and Pt54 is a central vacant icosahedron. The difference related to the potential parameters of these metallic clusters is further investigated by energy analysis. Moreover, the potential energy surfaces (PES) of 38-atom metallic clusters is characterized in terms of conformational analysis. It was found that the sequence of the number of local minima on the PES from large to low is Ni, Cu, Ag, Pt, Pd, and Au.

  9. Computational modelling of Ti50Pt50-xMx shape memory alloys (M: Ni, Ir or Pd and x = 6.25-43.75 at.%)

    CSIR Research Space (South Africa)

    Modiba, Rosinah M

    2017-09-01

    Full Text Available The ab initio density functional theory approach was employed to study the effect of Ni, Ir or Pd addition to the TiPt shape memory alloy. The supercell approach in VASP was used to substitute Pt with 6.25, 18.75, 25.00, 31.25 and 43.75 at.% Ni, Ir...

  10. Adsorption of Ni, Pd, Pt, Cu, Ag and Au on the Fe3O4(111) surface

    Science.gov (United States)

    Yu, Xiaohu; Tian, Xinxin; Wang, Shengguang

    2014-10-01

    The interaction of Group 10 and 11 transition metals with the magnetite (111) surface has been investigated using the GGA + U density functional theory and periodic slab surface models. It was found that these transition metals adsorb stronger on an oxygen-terminated magnetite (111) surface than on an iron-terminated surface. On an oxygen-terminated surface, the adsorption strength is in the order of Ni > Pt Cu > Pd > Ag Au. In contrast, the order on an iron-terminated surface is Ni > Pt Cu > Au > Pd Ag. The adsorption strength was found to correlate well with the average lengths of metal-oxygen bonds. The magnetite (111) surfaces largely modify the electronic structures of the transition metals. Compared to their density of states in bulk structures, the atomically adsorbed transition metals have narrower d bands, and their d-band centers are closer to the Fermi levels. This implies the higher activities of the atomically adsorbed transition metals.

  11. Spin Crossover in Fe(II)-M(II) Cyanoheterobimetallic Frameworks (M = Ni, Pd, Pt) with 2-Substituted Pyrazines.

    Science.gov (United States)

    Kucheriv, Olesia I; Shylin, Sergii I; Ksenofontov, Vadim; Dechert, Sebastian; Haukka, Matti; Fritsky, Igor O; Gural'skiy, Il'ya A

    2016-05-16

    Discovery of spin-crossover (SCO) behavior in the family of Fe(II)-based Hofmann clathrates has led to a "new rush" in the field of bistable molecular materials. To date this class of SCO complexes is represented by several dozens of individual compounds, and areas of their potential application steadily increase. Starting from Fe(2+), square planar tetracyanometalates M(II)(CN)4(2-) (M(II) = Ni, Pd, Pt) and 2-substituted pyrazines Xpz (X = Cl, Me, I) as coligands we obtained a series of nine new Hofmann clathrate-like coordination frameworks. X-ray diffraction reveals that in these complexes Fe(II) ion has a pseudo-octahedral coordination environment supported by four μ4-tetracyanometallates forming its equatorial coordination environment. Depending on the nature of X and M, axial positions are occupied by two 2X-pyrazines (X = Cl and M(II) = Ni (1), Pd (2), Pt (3); X = Me and M(II) = Ni (4), Pd (5)) or one 2X-pyrazine and one water molecule (X = I and M(II) = Ni (7), Pd (8), Pt (9)), or, alternatively, two distinct Fe(II) positions with either two pyrazines or two water molecules (X = Me and M(II) = Pt (6)) are observed. Temperature behavior of magnetic susceptibility indicates that all compounds bearing FeN6 units (1-6) display cooperative spin transition, while Fe(II) ions in N5O or N4O2 surrounding are high spin (HS). Structural changes in the nearest Fe(II) environment upon low-spin (LS) to HS transition, which include ca. 10% Fe-N distance increase, lead to the cell expansion. Mössbauer spectroscopy is used to characterize the spin state of all HS, LS, and intermediate phases of 1-9 (see abstract figure). Effects of a pyrazine substituent and M(II) nature on the hyperfine parameters in both spin states are established.

  12. Facile Synthesis of Pt-/Pd-MODIFIED NiTi Electrode with Superior Electro-Catalytic Activities Toward Methanol, Ethanol and Ethylene Glycol Oxidation

    Science.gov (United States)

    He, Yongwei; Wang, Mei; Ma, Zizai; Li, Ruixue; Kundu, Manab; Ma, Guanshui; Lin, Naiming; Tang, Bin; Wang, Xiaoguang

    2016-11-01

    Surface functional modification of NiTi electrode with noble Pt and Pd metal has been successfully carried out by simple and cost effective electro-spark deposition technique (ESD). Thin-film X-ray diffraction (TF-XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and cyclic voltammetry (CV) have been carried out in order to investigate the structure, morphology, chemical composition and electrochemical behavior of the modified electrode surface. The modified Pt/NiTi and Pd/NiTi electrode surface exhibit a circular splash pattern with a tiny amount of Pt (˜5.30 at.% Pt) and Pd (˜5.71 at.% Pd) existence. The electrochemical results demonstrate that the Pt/NiTi and Pd/NiTi electrode possess an improved electro-catalytic activities toward methanol (MeOH), ethanol (EtOH) and ethylene glycol (EG) oxidation in alkaline media in comparison with the bare NiTi electrode. In acidic environments, the Pt/NiTi electrode exhibits even much better catalytic activities than the pure Pt sheet electrode due to the bi-functional mechanism. In the same way, the electro-catalytic activity of the modified Pd/NiTi electrode is also slightly larger than that of the pure Pd sheet electrode in alkaline environment. The electro-spark surface modification approach is rapid and environmentally-benign, being attractive to widen the application of traditional surface modification technique in the field of material surface/interface design and functionalization.

  13. O{sub 2} adsorption and dissociation on the Pd{sub 13-n}Ni{sub n}@Pt{sub 42} (n = 0, 1, 12, and 13) tri-metallic nanoparticles: A DFT study

    Energy Technology Data Exchange (ETDEWEB)

    Li, Sha; Yang, Yongpeng; Huang, Shiping, E-mail: huangsp@mail.buct.edu.cn

    2017-07-15

    Highlights: • O{sub 2} adsorption and dissociation on Pd{sub 13-n}Ni{sub n}@Pt{sub 42} NPs are performed by DFT. • Adsorption energies of O{sub 2} and O are strongly affected by the coordination number. • Adsorption energy and d-band center displays the opposite change tendency. • Ni{sub 13}@Pt{sub 42} is the most active catalyst among Pd{sub 13-n}Ni{sub n}@Pt{sub 42} (n = 0, 1, 12, and 13) NPs. - Abstract: Density functional theory calculations are performed to investigate O{sub 2} adsorption and dissociation on the icosahedral Pd{sub 13-n}Ni{sub n}@Pt{sub 42} (n = 0, 1, 12, and 13) tri-metallic nanoparticles. The parallel adsorption of O{sub 2} on Pd{sub 13-n}Ni{sub n}@Pt{sub 42} (n = 0, 1, 12, and 13) is stronger than the vertical adsorption. The adsorption of O{sub 2} on the bridge site (B1) is favorable in the Pd{sub 13-n}Ni{sub n}@Pt{sub 42} (n = 0, 1, 12, and 13) nanoparticles, while the adsorption of O atom on the hollow site (H1) is preferred. The adsorption energies of O{sub 2} and O are strongly affected by the coordination number. Low coordination site shows strong adsorption of O{sub 2} and O on the Pd{sub 13-n}Ni{sub n}@Pt{sub 42} (n = 0, 1, 12, and 13) nanoparticles. The adsorption energies of O{sub 2} and O atoms are found to be correlated well with the d-band center of surface Pt. For the Pd{sub 13-n}Ni{sub n}@Pt{sub 42} (n = 0, 1, 12, and13) nanoparticles catalysts, the ORR activity follows the order of Ni{sub 13}@Pt{sub 42} > Pd{sub 13}@Pt{sub 42} > Pd{sub 12}Ni{sub 1}@Pt{sub 42} > Pd{sub 1}Ni{sub 12}@Pt{sub 42}, illustrating that the Ni{sub 13}@Pt{sub 42} is the strongest ORR activity among the Pd{sub 13-n}Ni{sub n}@Pt{sub 42} (n = 0, 1, 12, and13) nanoparticles catalysts. Our results have important significance to understand the mechanism of O{sub 2} dissociation on the Pd{sub 13-n}Ni{sub n}@Pt{sub 42} (n = 0, 1, 12, and 13) tri-metallic nanoparticles.

  14. H2production by the photocatalytic reforming of cellulose and raw biomass using Ni, Pd, Pt and Au on titania.

    Science.gov (United States)

    Caravaca, A; Jones, W; Hardacre, C; Bowker, M

    2016-07-01

    Here, we report a method for sustainable hydrogen production using sunlight and biomass. It is shown that cellulose can be photoreformed to produce hydrogen, even in solid form, by use of metal-loaded titania photocatalysts. The experiments performed verified that the process is enabled by initial hydrolysis via glucose, which itself is shown to be efficiently converted to produce hydrogen by photocatalysis. Importantly, it is shown that not only precious metals such as Pt, Pd and Au can be used as the metal component, but also much more economic and less environmentally damaging Ni is effective. Even more importantly, we show for the first time, to the best our knowledge, that fescue grass as raw biomass can be effective for hydrogen production without significant pre-treatment. This provides additional benefits for the efficiency of biomass hydrogen production, because fewer processing steps for the raw material are required than in the production of purer forms of cellulose, for example.

  15. Self-consistent linear-muffin-tin-orbitals coherent-potential technique for bulk and surface calculations: Cu-Ni, Ag-Pd, and Au-Pt random alloys

    DEFF Research Database (Denmark)

    Abrikosov, I. A.; Skriver, Hans Lomholt

    1993-01-01

    energies and work functions for three fcc-based alloys (Cu-Ni, Ag-Pd, and Au-Pt) over the complete concentration range. The calculated mixing enthalpies for the Ag-Pd and Au-Pt systems agrees with experimental values, and the calculated concentration dependence of the lattice parameters agrees...

  16. Copper-based alloys, crystallographic and crystallochemical parameters of alloys in binary systems Cu-Me (Me=Co, Rh, Ir, Cu, Ag, Au, Ni, Pd, Pt)

    Energy Technology Data Exchange (ETDEWEB)

    Porobova, Svetlana, E-mail: porobova.sveta@yandex.ru; Loskutov, Oleg, E-mail: lom58@mail.ru [Tomsk State University of Architecture and Building, Russia, Tomsk, 2 Solyanaya sq, Tomsk, 634003 (Russian Federation); Markova, Tat’jana, E-mail: patriot-rf@mail.ru [Siberian State Industrial University. 42 Kirov St., Novokuznetsk, 654007 (Russian Federation); Klopotov, Vladimir, E-mail: vdklopotov@mail.ru [Research Tomsk Polytechnic University, 30 Lenin Ave., Tomsk, 634050 (Russian Federation); Klopotov, Anatoliy, E-mail: klopotovaa@tsuab.ru [Tomsk State University of Architecture and Building, Russia, Tomsk, 2 Solyanaya sq, Tomsk, 634003 (Russian Federation); National Research Tomsk State University, 36, Lenin Ave., Tomsk, 634050 (Russian Federation); Vlasov, Viktor, E-mail: vik@tsuab.ru [Tomsk State University of Architecture and Building, Russia, Tomsk, 2 Solyanaya sq, Tomsk, 634003 (Russian Federation); Research Tomsk Polytechnic University, 30 Lenin Ave., Tomsk, 634050 (Russian Federation)

    2016-01-15

    The article presents the results of the analysis of phase equilibrium of ordered phases in binary systems based on copper Cu- Me (where Me - Co, Rh, Ir, Ag, Au, Ni, Pd, Pt) to find correlations of crystallochemical and crystallographic factors. It is established that the packing index in disordered solid solutions in binary systems based on copper is close to the value of 0.74 against the background of an insignificant deviation of atomic volumes from the Zen’s law.

  17. Hydrogen absorbing characteristics of R-M (R = La, Ce; M = Co, Rh, Ir, Ni, Pd, Pt) binary systems

    International Nuclear Information System (INIS)

    Kadono, J.; Hirano, K.; Nishiuchi, S.; Ariga, R.; Yamamoto, S.; Tanabe, T.; Miyake, H.

    2006-01-01

    The capacity, rate and reversibility of the hydrogen absorbing/desorbing reaction have been measured for the binary systems composed of rare earth metal, R (La or Ce), and transition metal, M (Co, Rh, Ir, Ni, Pd or Pt), by Sieverts' method. These experimental results were discussed by comparing with the theoretical ones; density of states, cohesive energy and energy fluctuation, which were calculated by the extended Hueckel method. Major results obtained are as follows. (1) The capacity of hydrogen absorption decreases almost linearly with increasing M components in R-M systems and it is explained in terms of the density of states. (2) The rate of hydrogen-absorbing reaction in La-M systems are larger than that of Ce-M systems. The larger absorption rate corresponds to the larger energy fluctuation. (3) The reversibility of the hydrogen absorbing/desorbing reaction is closely related with the cohesive energy of these systems. When the cohesive energy of the hydrogen absorbed system is large, a reverse (i.e. desorbing) reaction hardly occurs

  18. Synthesis and spectroscopic studies of biologically active tetraazamacrocyclic complexes of Mn(II, Co(II, Ni(II, Pd(II and Pt(II

    Directory of Open Access Journals (Sweden)

    Monika Tyagi

    2014-01-01

    Full Text Available Complexes of Mn(II, Co(II, Ni(II, Pd(II and Pt(II were synthesized with the macrocyclic ligand, i.e., 2,3,9,10-tetraketo-1,4,8,11-tetraazacycoletradecane. The ligand was prepared by the [2 + 2] condensation of diethyloxalate and 1,3-diamino propane and characterized by elemental analysis, mass, IR and 1H NMR spectral studies. All the complexes were characterized by elemental analysis, molar conductance, magnetic susceptibility measurements, IR, electronic and electron paramagnetic resonance spectral studies. The molar conductance measurements of Mn(II, Co(II and Ni(II complexes in DMF correspond to non electrolyte nature, whereas Pd(II and Pt(II complexes are 1:2 electrolyte. On the basis of spectral studies an octahedral geometry has been assigned for Mn(II, Co(II and Ni(II complexes, whereas square planar geometry assigned for Pd(II and Pt(II. In vitro the ligand and its metal complexes were evaluated against plant pathogenic fungi (Fusarium odum, Aspergillus niger and Rhizoctonia bataticola and some compounds found to be more active as commercially available fungicide like Chlorothalonil.

  19. Improvement of energy conversion efficiency and power generation in direct borohydride-hydrogen peroxide fuel cell: The effect of Ni-M core-shell nanoparticles (M = Pt, Pd, Ru)/Multiwalled Carbon Nanotubes on the cell performance

    Science.gov (United States)

    Hosseini, M. G.; Mahmoodi, R.

    2017-12-01

    In this study, core@shell nanoparticles with Ni as a core material and Pt, Pd and Ru as shell materials are synthesized on multiwalled carbon nanotube (MWCNT) as catalyst support using the sequence reduction method. The influence of Ni@Pt, Ni@Pd and Ni@Ru core@shell nanoparticles on MWCNT toward borohydride oxidation in alkaline solution is investigated by various three-electrode electrochemical techniques. Also, the impact of these anodic electrocatalysts on the performance of direct borohydride-hydrogen peroxide fuel cell (DBHPFC) is evaluated. The structural and morphological properties of electrocatalysts are studied by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM) and X-ray photoelectron spectroscopy (XPS). The results of three electrode investigations show that Ni@Pd/MWCNT has excellent catalytic activity since borohydride oxidation current density on Ni@Pd/MWCNT (34773.27 A g-1) is 1.37 and 9.19 times higher than those of Ni@Pt/MWCNT (25347.27 A g-1) and Ni@Ru/MWCNT (3782.83 A g-1), respectively. Also, the energy conversion efficiency and power density of DBHPFC with Ni@Pd/MWCNT (246.82 mW cm-2) increase to 34.27% and 51.53% respect to Ni@Pt/MWCNT (162.24 mW cm-2) and Ni@Ru/MWCNT (119.62 mW cm-2), respectively. This study reveals that Ni@Pd/MWCNT has highest activity toward borohydride oxidation and stability in fuel cell.

  20. Ni(II, Pd(II and Pt(II complexes with ligand containing thiosemicarbazone and semicarbazone moiety: synthesis, characterization and biological investigation

    Directory of Open Access Journals (Sweden)

    SULEKH CHANDRA

    2008-07-01

    Full Text Available The synthesis of nickel(II, palladium(II and platinum(II complexes with thiosemicarbazone and semicarbazone of p-tolualdehyde are reported. All the new compounds were characterized by elemental analysis, molar conductance measurements, magnetic susceptibility measurements, mass, 1H-NMR, IR and electronic spectral studies. Based on the molar conductance measurements in DMSO, the complexes may be formulated as [Ni(L2Cl2] and [M(L2]Cl2 (where M = Pd(II and Pt(II due to their non-electrolytic and 1:2 electrolytic nature, respectively. The spectral data are consistent with an octahedral geometry around Ni(II and a square planar geometry for Pd(II and Pt(II, in which the ligands act as bidentate chelating agents, coordinated through the nitrogen and sulphur/oxygen atoms. The ligands and their metal complexes were screened in vitro against fungal species Alternaria alternata, Aspergillus niger and Fusarium odum, using the food poison technique.

  1. Room temperature biogenic synthesis of multiple nanoparticles (Ag, Pd, Fe, Rh, Ni, Ru, Pt, Co, and Li) by Pseudomonas aeruginosa SM1

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, Sarvesh Kumar; Constanti, Magda, E-mail: magdalena.constanti@urv.cat [Universitat Rovira i Virgili, Departament d' Enginyeria Quimica (Spain)

    2012-03-15

    Room temperature biosynthesis of Ag, Pd, Fe, Rh, Ni, Ru, Pt, Co, and Li nanoparticles was achieved using Pseudomonas aeruginosa SM1 without the addition of growth media, electron donors, stabilizing agents, preparation of cell/cell-free extract or temperature, and pH adjustments. The resulting nanoparticles were characterized by Transmission electron microscopy and X-ray diffraction. It was observed that P. aeruginosa SM1 is capable of producing both intracellular (Co and Li) and extracellular (Ag, Pd, Fe, Rh, Ni, Ru, and Pt) nanoparticles in both crystalline and amorphous state. The FT-IR spectra clearly showed the presence of primary and secondary amines which may be responsible for the reduction and subsequent stabilization of the resulting extracellular nanoparticles which were obtained as a one-step process. This suggests toward an unknown 'selection mechanism' that reduces certain metal ions and allows others to enter the cell membrane. Finally, in this first of its kind study, single strain of bacteria was used to produce several different mono-metallic nanoparticles.

  2. Elaborated studies for the ligitional behavior of thiouracil derivative towards Ni(II), Pd(II), Pt(IV), Cu(II) and UO2 ² ions.

    Science.gov (United States)

    Abou-Melha, Khlood Saad

    2012-11-01

    A synthesis of new thiouracil derivative was carried out and deliberately investigated. A new series of complexes was prepared using Ni(II), Pd(II), Pt(IV), Cu(II) and UO(2)(+2) ions. IR spectral data proposed the coordination mod of the ligand towards each metal ion and displays the binegative pentadentate mod as the maximum mod of coordination obtained with Ni(II) and Cu(II) complexes. (1)HNMR spectrum of UO(2)(+2) complex in comparing with the free ligand spectrum supports the binegative appearance of the coordinated ligand through the ionization of CO and CS groups. The electronic spectral data as well as the magnetic moment measurements are coincide with each others to propose the square-planar geometry with Ni(II), Pd(II) and Cu(II) complexes and octahedral geometry with the others. ESR spectrum of Cu(II) complex displays axially symmetric g tensor parameters with g(11)>g(⊥)>2.0023 indicating that the [Formula: see text] orbital as a ground state with the square-planar geometry. The TG analysis for all isolated complexes were carried out to assert about the presence of water molecules physically or chemically attached with the central atom. The biological study was carried out against different microorganisms as gram negative, gram positive and fungi. The comparable data display the relative priority of Ni(II) complex in comparing with others against all organisms but, the other complexes display activity by the same with the free ligand. Copyright © 2012 Elsevier B.V. All rights reserved.

  3. The adsorption of CO and NO on the MoS{sub 2} monolayer doped with Au, Pt, Pd, or Ni: A first-principles study

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Dongwei, E-mail: dwmachina@126.com [School of Physics, Anyang Normal University, Anyang 455000 (China); Ju, Weiwei [College of Physics and Engineering, Henan University of Science and Technology, Luoyang 471023 (China); Li, Tingxian; Zhang, Xiwei [School of Physics, Anyang Normal University, Anyang 455000 (China); He, Chaozheng, E-mail: hecz2013@nynu.edu.cn [Physics and Electronic Engineering College, Nanyang Normal University, Nanyang 473061 (China); Ma, Benyuan [Physics and Electronic Engineering College, Nanyang Normal University, Nanyang 473061 (China); Lu, Zhansheng; Yang, Zongxian [College of Physics and Electronic Engineering, Henan Normal University, Xinxiang 453007 (China)

    2016-10-15

    Graphical abstract: The MoS{sub 2} monolayers doped with Au, Pt, Pd, or Ni show enhanced adsorption and sensitivity toward CO or NO molecule. - Highlights: • CO and NO adsorption on the doped MoS{sub 2} monolayers is theoretically studied. • CO and NO are chemisorbed on the doped MoS{sub 2} monolayers. • Charge transfer can be observed between the adsorbed molecule and the substrates. • Molecular adsorption can induce the change in electronic structures of the doped MoS{sub 2} monolayers. - Abstract: By performing the first-principles calculation, the adsorption of CO and NO molecules on the Au, Pt, Pd, or Ni doped MoS{sub 2} monolayer has been studied. The interaction between CO or NO with the doped MoS{sub 2} monolayer is strong and belongs to the chemisorption, as evidenced by the large adsorption energy and the short distance between the adsorbed molecules and the dopants. The charge transfer and the electronic property induced by the molecule adsorption are discussed. It is found that for both CO and NO adsorption, for all the cases charge transfer between the substrates and the adsorbed molecules has been observed. For NO, the adsorption obviously induces new impurity states in the band gap or the redistribution of the original impurity states. These can lead to the change of the transport properties of the doped MoS{sub 2} monolayer, by which the adsorbed CO or NO can be detected. The present work shows that introducing appropriate dopants may be a feasible method to improve the performance of MoS{sub 2}-based gas sensors.

  4. Characterization of Ni19.5Ti50.5Pd25Pt5 High-Temperature Shape Memory Alloy Springs and their Potential Application in Aeronautics

    Science.gov (United States)

    Stebner, Aaron; Padula, Santo A.; Noebe, Ronald D.

    2008-01-01

    Shape memory alloys (SMAs) have been used as actuators in many different industries since the discovery of the shape memory effect, but the use of SMAs as actuation devices in aeronautics has been limited due to the temperature constraints of commercially available materials. Consequently, work is being done at NASA's Glenn Research Center to develop new SMAs capable of being used in high temperature environments. One of the more promising high-temperature shape memory alloys (HTSMAs) is Ni19.5Ti50.5Pd25Pt5. Recent work has shown that this material is capable of being used in operating environments of up to 250 C. This material has been shown to have very useful actuation capabilities, demonstrating repeatable strain recoveries up to 2.5% in the presence of an externally applied load. Based on these findings, further work has been initiated to explore potential applications and alternative forms of this alloy, such as springs. Thus, characterization of Ni19.5Ti50.5Pd25Pt5 springs, including their mechanical response and how variations in this response correlate to changes in geometric parameters, are discussed. The effects of loading history, or training, on spring behavior were also investigated. A comparison of the springs with wire actuators is made and the benefits of using one actuator form as opposed to the other discussed. These findings are used to discuss design considerations for a surge-control mechanism that could be used in the centrifugal compressor of a T-700 helicopter engine.

  5. Separation Studies of Pd(II from Acidic Chloride Solutions of Pt(IV, Ni(II and Rh(III by Using 4-Aroyl-3-Phenyl-5-Isoxazolones

    Directory of Open Access Journals (Sweden)

    Koduru Janardhan Reddy

    2012-01-01

    Full Text Available This study examined the effect influence of various factors on the extraction of Pd(II to develop a new liquid-liquid extraction mechanism for the selective separation of palladium(II from its acidic chloride solutions using 4-aroyl-3-phenyl-5-isoxazolones (HA, such as 3-phenyl-4-(4-fluorobenzoyl-5- isoxazolone (HFBPI, 3-phenyl-4-benzoyl-5-isoxazolone (HPBI and 3-phenyl-4- (4-toluoyl-5-isoxazolone (HTPI. The extraction strength of Pd(II with HA were in the following order: HFBPI > HPBI > HTPI, which is opposite to that observed with their pKa values. HPBI was used to separate Pd(II from Pt(IV, Ni(II and Rh(III metal ions and calculated their separation factors (S.F. were followed in the order: Pd/Ni (40±0.4 > Pd/Pt (25±0.2 > Pd/Rh (15±0.3 > Rh/Ni (2.7±0.3 > Pt/Ni ≈ Rh/Pt (1.7±0.2. The loading and striping of Pd(II (1.12×10-4 mol L-1 were also examined using 1.0×10-3 mol L-1 HPBI in CHCl3 and 1.0 mol L-1 HCl, respectively. The results demonstrated that the maximum (97.5% extraction and desorption (89% of metal required at least 3.0 cycles. The developed method was applied successfully to the separation of palladium from synthetic water samples.

  6. Measurement of benzenethiol adsorption to nanostructured Pt, Pd, and PtPd films using Raman spectroelectrochemistry.

    Science.gov (United States)

    Pomfret, Michael B; Pietron, Jeremy J; Owrutsky, Jeffrey C

    2010-05-04

    Raman spectroscopy and electrochemical methods were used to study the behavior of the model adsorbate benzenethiol (BT) on nanostructured Pt, Pd, and PtPd electrodes as a function of applied potential. Benzenethiol adsorbs out of ethanolic solutions as the corresponding thiolate, and voltammetric stripping data reveal that BT is oxidatively removed from all of the nanostructured metals upon repeated oxidative and reductive cycling. Oxidative stripping potentials for BT increase in the order Pt < PtPd < Pd, indicating that BT adsorbs most strongly to nanoscale Pd. Yet, BT Raman scattering intensities, measured in situ over time scales of minutes to hours, are most persistent on the film of nanostructured Pt. Raman spectra indicate that adsorbed BT desorbs from nanoscale Pt at oxidizing potentials via cleavage of the Pt-S bond. In contrast, on nanoscale Pd and PtPd, BT is irreversibly lost due to cleavage of BT C-S bonds at oxidizing potentials, which leaves adsorbed sulfur oxides on Pd and PtPd films and effects the desulfurization of BT. While Pd and PtPd films are less sulfur-resistant than Pt films, palladium oxides, which form at higher potentials than Pt oxides, oxidatively desulfurize BT. In situ spectroelectrochemical Raman spectroscopy provides real-time, chemically specific information that complements the cyclic voltammetric data. The combination of these techniques affords a powerful and convenient method for guiding the development of sulfur-tolerant PEMFC catalysts.

  7. Synthesis, characterization and anti-microbial evaluation of Cu(II), Ni(II), Pt(II) and Pd(II) sulfonylhydrazone complexes; 2D-QSAR analysis of Ni(II) complexes of sulfonylhydrazone derivatives

    Science.gov (United States)

    Özbek, Neslihan; Alyar, Saliha; Alyar, Hamit; Şahin, Ertan; Karacan, Nurcan

    2013-05-01

    Copper(II), nickel(II), platinum(II) and palladium(II) complexes with 2-hydroxy-1-naphthaldehyde-N-methylpropanesulfonylhydrazone (nafpsmh) derived from propanesulfonic acid-1-methylhydrazide (psmh) were synthesized, their structure were identified, and antimicrobial activity of the compounds was screened against three Gram-positive and three Gram-negative bacteria. The results of antimicrobial studies indicate that Pt(II) and Pd(II) complexes showed the most activity against all bacteria. The crystal structure of 2-hydroxy-1-naphthaldehyde-N-methylpropanesulfonylhydrazone (nafpsmh) was also investigated by X-ray analysis. A series of Ni(II) sulfonyl hydrazone complexes (1-33) was synthesized and tested in vitro against Escherichia coli and Staphylococcus aureus. Their antimicrobial activities were used in the QSAR analysis. Four-parameter QSAR models revealed that nucleophilic reaction index for Ni and O atoms, and HOMO-LUMO energy gap play key roles in the antimicrobial activity.

  8. Structural and physical properties of new uranium and transition element ternary stannides (Fe, Co, Ni, Ru, Rh, Pd, Ir, Pt); Proprietes structurales et physiques de nouveaux stannures ternaires a base d'uranium et d'element de transition (Fe, Co, Ni, Rh, Pd, Ir, Pt)

    Energy Technology Data Exchange (ETDEWEB)

    Mirambet, F

    1993-12-15

    This work is dedicated to the study of ternary stannides based on uranium. The author reviews the structural, magnetic and electric properties of different families of stannides. The study of the U{sub 2}M{sub 2}Sn family where M stands for Fe, Co, Ni, Ru, Rh, Pd, Ir and Pt shows that the magnetic behaviour of uranium in these compounds is strongly influenced by the transition element M, which is explained by the hybridization force 5f(U) - nd(M) that depends on the number of electrons on the d shell of the M element. For instance, for the elements whose d shell is low filled (Fe, Ru), the U{sub 2}M{sub 2}Sn stannides show no magnetic order. On the other hand, when the number of d-electrons increases, a magnetic order appears progressively.

  9. The electrochemical atomic layer deposition of Pt and Pd nanoparticles on Ni foam for the electro oxidation of alcohols

    CSIR Research Space (South Africa)

    Modibedi, RM

    2013-01-01

    Full Text Available need to be lowered for the direct alcohol fuel cells. This can be achieved by increasing Pt utilization and reducing the amount of Pt required in fuel cells [1]. The cost of the proton exchange membrane fuel cells (PEMFC) depends primarily... nanostructures The three electrode flow cell at 25 °C was used for the electrochemical activity studies by means of cyclic voltammetry. An AutoLab PGSTAT302 potentiostat was used for the studies. Au wire and Ag/AgCl/3M KCl (BASF) were used as counter...

  10. Steady-State Spectroscopic Analysis of Proton-Dependent Electron Transfer on Pyrazine-Appended Metal Dithiolenes [Ni(pdt)2], [Pd(pdt)2], and [Pt(pdt)2] (pdt = 2,3-Pyrazinedithiol).

    Science.gov (United States)

    Kennedy, Steven R; Kozar, Morgan N; Yennawar, Hemant P; Lear, Benjamin J

    2016-09-06

    We report the structural, electronic, and acid/base properties of a series of ML2 metal dithiolene complexes, where M = Ni, Pd, Pt and L = 2,3-pyrazinedithiol. These complexes are non-innocent and possess strong electronic coupling between ligands across the metal center. The electronic coupling can be readily quantified in the monoanionic mixed valence state using Marcus-Hush theory. Analysis of the intervalence charge transfer (IVCT) band reveals that that electronic coupling in the mixed valence state is 5800, 4500, and 5700 cm(-1) for the Ni, Pd, and Pt complexes, respectively. We then focus on their response to acid titration in the mixed valence state, which generates the asymmetrically protonated mixed valence mixed protonated state. For all three complexes, protonation results in severe attenuation of the electronic coupling, as measured by the IVCT band. We find nearly 5-fold decreases in electronic coupling for both Ni and Pt, while, for the Pd complex, the electronic coupling is reduced to the point that the IVCT band is no longer observable. We ascribe the reduction in electronic coupling to charge pinning induced by asymmetric protonation. The more severe reduction in coupling for the Pd complex is a result of greater energetic mismatch between ligand and metal orbitals, reflected in the smaller electronic coupling for the pure mixed valence state. This work demonstrates that the bridging metal center can be used to tune the electronic coupling in both the mixed valence and mixed valence mixed protonated states, as well as the magnitude of change of the electronic coupling that accompanies changes in protonation state.

  11. Pt-Pd nanoelectrocatalyst of ultralow Pt content for the oxidation of ...

    Indian Academy of Sciences (India)

    Significant negative shift (∼350 mV) in the oxidation peak potential and remarkable enhancement in the current density (2.6 times) are observed for Pt4Pd96 nanoparticles with respect to Pt47Pd53. The absence of three adjacent Pt and Pd atoms could be the reason for the suppression of CO pathway. The electrochemical ...

  12. Amorphous Pt@PdCu/CNT Catalyst for Methanol Electrooxidation ...

    African Journals Online (AJOL)

    A multi-walled carbon nanotube-supported, Pt decorated nano-sized amorphous PdCu alloy cores (denoted as Pt@PdCu/CNT) catalyst with lower Pt loading is synthesized via a galvanic displacement reaction. The structure is examined using X-ray diffraction (XRD) and transmission electron microscopy (TEM).

  13. Amorphous Pt@PdCu/CNT Catalyst for Methanol Electrooxidation

    African Journals Online (AJOL)

    NICO

    A multi-walled carbon nanotube-supported, Pt decorated nano-sized amorphous PdCu alloy cores (denoted as Pt@PdCu/CNT) catalyst with lower Pt loading is synthesized via a galvanic displacement reaction. The structure is examined using X-ray diffrac- tion (XRD) and transmission electron microscopy (TEM).

  14. Synthesis of Supported NiPt Bimetallic Nanoparticles, Methods for Controlling the Surface Coverage of Ni Nanoparticles With Pt, Methods Of Making NiPt Multilayer Core-Shell Structures and Application of the Supported Catalysts for CO2 Reforming

    KAUST Repository

    Li, Lidong

    2015-06-25

    Embodiments of the present disclosure provide for supported Ni/Pt bimetallic nanoparticles, compositions including supported NiPt nanoparticles, methods of making supported NiPt nanoparticles, methods of using supported NiPt nanoparticles, and the like.

  15. Nanostructure analysis of friction welded Pd-Ni-P/Pd-Cu-Ni-P metallic glass interface

    International Nuclear Information System (INIS)

    Ohkubo, T.; Shoji, S.; Kawamura, Y.; Hono, K.

    2005-01-01

    Friction welded Pd 40 Ni 40 P 20 /Pd 40 Cu 30 Ni 10 P 20 metallic glass interface has been characterized by energy filtering transmission electron microscopy. The interface is fully amorphous with a gradual compositional change of Cu and Ni in the range of 30 nm. By annealing above T g , the interdiffusion of Cu and Ni progressed in the supercooled liquid region, and the crystallization occurred from the Pd 40 Ni 40 P 20 glass

  16. Performance of the PdNi and PdNiSe as cathodes in PEM fuel cells; Desempeno de PdNi y PdNiSe como catodos en celdas de combustible tipo PEM

    Energy Technology Data Exchange (ETDEWEB)

    Santana, A.; Ramos-Sanchez, G.; Vazquez, G.; Solorza-Feria, O. [Centro de Investigaciones y de Estudios Avanzados del IPN, Mexico D.F. (Mexico)]. E-mail: gramos@cinvestav.mx

    2009-09-15

    The search for new materials capable of catalyzing oxygen reactions in low temperature fuel cells continues to be one of the key issues in the development of a hydrogen economy. Electrochemical and physical characterization studies have demonstrated that the PdNi and PdNiSe catalysts have adequate properties for use as cathodes in fuel cells. Nevertheless, the performance of the materials in proton exchange membrane (PEM) fuel cells depends not only on the catalytic properties but also on the adequate preparation of the electrocatalyst membrane interface (EMI). This work presents the results of the search for optimal conditions to prepare the EMIs with PdNi and PdNiSe cathodes. There are many variables for handling the preparation of the interfaces, nevertheless our search focuses on two: catalyst ratio/Vulcan Carbon® and the catalyst amount. Interfaces were prepared with an active area of 5 cm{sup 2} with PdNi and PdNiSe cathodes and carbon fabric anode with Pt E-tek®. These interfaces were tested with an ElectroChem model under different gas pressure and temperature conditions. The optimization method was carried out using a simplex method with the variables mentioned above and power density per unit mass and catalyst area as response variables. [Spanish] La busqueda de nuevos materiales capaces de catalizar la Reaccion de Oxigeno (RRO) en celdas de combustible de baja temperatura, sigue siendo uno de los temas clave para el desarrollo de una Economia del Hidrogeno. Estudios electroquimicos y de caracterizacion fisica han demostrado que los catalizadores PdNi y PdNiSe, tienen las propiedades adecuadas para poder ser utilizados como catodos en celdas de combustible; sin embargo el desempeno de los materiales en celdas de combustible de membrana de intercambio protonico (PEM), no solo depende de las propiedades del catalizador, sino tambien de la preparacion adecuada del Ensamble Membrana Electrocatalizador (EME). En este trabajo se presentan los resultados de la

  17. Active Pt3Ni (111) Surface of Pt3Ni Icosahedron for Oxygen Reduction.

    Science.gov (United States)

    Zhu, Jianbing; Xiao, Meiling; Li, Kui; Liu, Changpeng; Zhao, Xiao; Xing, Wei

    2016-11-09

    Highly active, durable oxygen reduction reaction (ORR) electrocatalysts are extremely important for fuel cell applications. Herein, we provide an efficient way to synthesis of activity Pt 3 M icosahedra by the one-pot hydrothermal method in the presence of glucosamine which can well adjust the reduction rate of Pt 4+ and efficiently control the morphology of final catalysts. Compared to Pt/C, the Pt 3 Ni icosahedra show 32-fold and 12-fold enhancement in specific and mass activity, respectively. Furthermore, robust durability was also observed in the accelerated durability test. Thus, this Pt 3 Ni icosahedron is found among the best Pt-based ORR catalysts, moreover, the findings also demonstrate how to mimic active extended surfaces in nanoscale.

  18. Critical Factors Controlling Pd and Pt Potential in Porphyry Cu–Au Deposits: Evidence from the Balkan Peninsula

    Directory of Open Access Journals (Sweden)

    Demetrios G. Eliopoulos

    2014-03-01

    Full Text Available Porphyry Cu–Au–Pd±Pt deposits are significant Au resources, but their Pd and Pt potential is still unknown. Elevated Pd, Pt (hundreds of ppb and Au contents are associated with typical stockwork magnetite-bornite-chalcopyrite assemblages, at the central parts of certain porphyry deposits. Unexpected high grade Cu–(Pd+Pt (up to 6 ppm mineralization with high Pd/Pt ratios at the Elatsite porphyry deposit, which is found in a spatial association with the Chelopech epithermal deposit (Bulgaria and the Skouries porphyry deposit, may have formed during late stages of an evolved hydrothermal system. Estimated Pd, Pt and Au potential for porphyry deposits is consistent with literature model calculations demonstrating the capacity of aqueous vapor and brine to scavenge sufficient quantities of Pt and Pd, and could contribute to the global platinum-group element (PGE production. Critical requirements controlling potential of porphyry deposits may be from the metals contained in magma (metasomatized asthenospheric mantle wedge as indicated by significant Cr, Co, Ni and Re contents. The Cr content may be an indicator for the mantle input.

  19. Computational modelling of Ti50Pt50-xMx shape memory alloys (M: Ni, Ir or Pd and x = 6.25-43.75 at.%)

    CSIR Research Space (South Africa)

    Modiba, Rosinah M

    2017-09-01

    Full Text Available of elasticity is important for determining the mechanical stability and elastic properties of any system. There are three (C11, C12, C44) independent elastic constants for cubic. The mechanical stability criteria of the cubic system (Mayer et al., 2003)are... and electronic properties of equiatomic PtTi as potential high-temperature shape memory alloy. Intermetallics, 33, 27- 32. Mayer, B., Anton, H., Bott, E., Methfessel, M., Sticht, J. and Schmidt, P.C. (2003). Ab-initio calculation of the elastic constants...

  20. London penetration depth measurements in Ba (Fe1-xTx)2As2(T=Co,Ni,Ru,Rh,Pd,Pt,Co+Cu) superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, Ryan T. [Iowa State Univ., Ames, IA (United States)

    2011-01-01

    The London penetration depth has been measured in various doping levels of single crystals of Ba(Fe1-xTx)2As2 (T=Co,Ni,Ru,Rh,Pd,Pt,Co+Cu) superconductors by utilizing a tunnel diode resonator (TDR) apparatus. All in-plane penetration depth measurements exhibit a power law temperature dependence of the form Δλab(T) = CTn, indicating the existence of low-temperature, normal state quasiparticles all the way down to the lowest measured temperature, which was typically 500 mK. Several different doping concentrations from the Ba(Fe1-xTx)2As2 (T=Co,Ni) systems have been measured and the doping dependence of the power law exponent, n, is compared to results from measurements of thermal conductivity and specific heat. In addition, a novel method has been developed to allow for the measurement of the zero temperature value of the in-plane penetration depth, λab(0), by using TDR frequency shifts. By using this technique, the doping dependence of λab(0) has been measured in the Ba(Fe1-xCox)2As2 series, which has allowed also for the construction of the doping-dependent superfluid phase stiffness, ρs(T) = [λ(0)/λ(T)]2. By studying the effects of disorder on these superconductors using heavy ion irradiation, it has been determined that the observed power law temperature dependence likely arises from pair-breaking impurity scattering contributions, which is consistent with the proposed s±-wave symmetry of the superconducting gap in the dirty scattering limit. This hypothesis is supported by the measurement of an exponential temperature dependence of the penetration depth in the intrinsically clean LiFeAs, indicative of a nodeless superconducting gap.

  1. One-pot synthesis of Pd-Pt@Pd core-shell nanocrystals with enhanced electrocatalytic activity for formic acid oxidation

    KAUST Repository

    Yuan, Qiang

    2014-01-01

    Well-defined Pd-Pt@Pd core-shell nanocrystals with a Pd-Pt alloy core and a conformal Pd shell of ~2-3 nm were directly synthesized through a one-pot, aqueous solution approach without any preformed Pd or Pt seeds. These Pd-Pt@Pd core-shell nanocrystals show an enhanced electrocatalytic activity for formic acid oxidation compared with commercial Pd black. This journal is © 2014 The Royal Society of Chemistry.

  2. Formation of amorphous alloys by mechanical alloying for platinum group metal-M(M=Zr or Al) system; Mechanical alloying ni yoru kikinzoku (Pd,Pt) to M(Zr aruiwa Al) tono kongo funmatsu no hishoshitsuka

    Energy Technology Data Exchange (ETDEWEB)

    Tsuzuki, T.; Arakawa, T. [Kinki Univ., Higashi-Osaka, Osaka (Japan)

    1998-08-15

    The intermetallic compounds containing precious metals such as platinum white gold are widely used in chemistry or industry as catalysts. These alloy catalysts are mainly used in grinding the materials prepared by solidifying liquids. The authors of the paper attempt to prepare alloy powders of precious metal with Zr or Al by mechanical alloying (MA). As an object of applying them on a catalyst, alloy powders of precious metals (Pd and Pt) and M (Zr or Al) are regulated by the mechanical alloying reaction, and the results show that the Pd and Pt show different MA reaction while using Al as the M, the former generates an intermetallic compound as PdAl during the halfway point of the MA reaction, but the later generates amorphous powders. But, each of them generates amorphous alloys only while using Zr and the M. As a result of differential thermal analysis and electrical resistivity measurement investigating the crystalline process of the obtained amorphous alloys, it is clarified that the Pt-Al base alloy shows higher crystalline temperature compared with the other alloys. 8 refs., 6 figs.

  3. Reaction-Driven Restructuring of Rh-Pd and Pt-Pd Core-Shell Nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Tao, Feng; Grass, Michael E.; Zhang, Yawen; Butcher, Derek R.; Renzas, James R.; Liu, Zhi; Chung, Jen Y.; Mun, Bongjin S.; Salmeron, Miquel; Somorjai, Gabor A.

    2009-06-17

    The structure and composition of core-shell Rh{sub 0.5}Pd{sub 0.5} and Pt{sub 0.5}Pd{sub 0.5} nanoparticle catalysts were studied in situ, during oxidizing, reducing, and catalytic reactions involving NO, O{sub 2}, CO, and H{sub 2} using X-ray photoelectron spectroscopy in the Torr pressure range. The Rh{sub 0.5}Pd{sub 0.5} nanoparticles undergo dramatic and reversible changes in composition and chemical state in response to oxidizing or reducing conditions. Under oxidizing conditions the Rh atoms segregate to the shell region while in reducing atmospheres the Pd atoms diffuse to the shell region. In contrast no significant segregation of Pd or Pt atoms was found in Pt{sub 0.5}Pd{sub 0.5} nanoparticles. The distinct behavior in restructuring and chemical response of Rh{sub 0.5}Pd{sub 0.5} and Pt{sub 0.5}Pd{sub 0.5} nanoparticle catalysts under the same reaction conditions illustrates the flexibility and tunability of the structure of bimetallic nanoparticle catalysts during catalytic reactions.

  4. PtNi nanoparticles embedded in porous silica microspheres as ...

    Indian Academy of Sciences (India)

    SEM, EDS, TEM, FTIR, XRD, ICP-AES, XPS and nitrogen adsorption/desorption analysis were employed to systematically investigate the morphology and structure of the obtained SiO2 microspheres and SiO₂/PtNi nanocatalysts. Results show that uniform PtNi nanoparticles can be homogeneously and firmly embedded ...

  5. Microemulsion prepared Ni88Pt12 for methane cracking

    KAUST Repository

    Zhou, Lu

    2017-01-16

    Monodispersed NiPt nanoparticles of 10 nm were synthesized by water-in-oil microemulsion. The Ni-Pt alloy structure was stable during the thermal treatment between 330 and 1037 °C, whereas the relatively low temperature range of 600-700 °C was favorable for methane cracking to produce hydrogen and carbon nanotubes.

  6. Performance of PtPd electrocatalysts in direct methanol fuel cell.

    Science.gov (United States)

    Kim, In-Tae; Choi, Mahnsoo; An, Jung-Chul; Lee, Hong-Ki; Shim, Joongpyo

    2010-05-01

    PtPd nanoparticles on carbon black were prepared to investigate the role of Pd in the anode and cathode of a direct methanol fuel cell (DMFC). The PtPd catalysts in the anode showed a significantly lower performance than the PtRu catalyst. However, the cell performances of these catalysts in the cathode were comparable to that of the Pt catalyst. From cyclic voltammetry, it was observed that the Pd with the Pt catalyst lowered the peak potential and increased the coulombic charge for oxide reduction on the surface of the catalyst. Also, the Pd catalyst without Pt showed relatively high activity for oxygen reduction reaction.

  7. Electrochemical study of the Pt and Pt-Ni upon multiwalled carbon nanotubes

    Science.gov (United States)

    Mohammed, Norani Muti; Mumtaz, Asad; Ansari, Muhammad Shahid; Ahmad, Riaz

    2016-11-01

    Direct methanol fuel cells have attracted great interest in the recent development of portable devices. New routes are being developed for synthesizing the catalysts used in the methanol oxidation. In this work, the electrochemical behavior of the Pt and Pt-Ni upon multiwalled carbon nanotubes, synthesized via a new modified route, has been studied. The results showed that Pt-Ni 10% has the comparable current density to the Pt 20%-loading which is nearly 3 times greater than 10% Pt loading. The transfer of the polarization curve of Pt-Ni 10% towards lower polarization region following the catalyst with 20% Pt loading indicates the higher activity of the nano-electro-catalysts in the alkaline media. Also the long term efficiency and activity of the Pt-Ni with 10% loading is nearly reaching the 20% Pt-loading which is almost 10 folds greater than the 10% Pt loading. The study revealed that Ni in Pt-based nanoalloy impart not only an enhanced activity but also better durability of catalyst in direct methanol fuel cell applications.

  8. Pt monolayer shell on hollow Pd core electrocatalysts: Scale up synthesis, structure, and activity for the oxygen reduction reaction

    Directory of Open Access Journals (Sweden)

    Vukmirovic Miomir B.

    2013-01-01

    Full Text Available We report on synthesis, characterization and the oxygen reduction reaction (ORR kinetics of Pt monolayer shell on Pd(hollow, or Pd-Au(hollow core electrocatalysts. Comparison between the ORR catalytic activity of the electrocatalysts with hollow cores and those of Pt solid and Pt hollow nanoparticles has been obtained using the rotating disk electrode technique. Hollow nanoparticles were made using Ni or Cu nanoparticles as sacrificial templates. The Pt ORR specific and mass activities of the electrocatalysts with hollow cores were found considerably higher than those of the electrocatalysts with the solid cores. We attribute this enhanced Pt activity to the smooth surface morphology and hollow-induced lattice contraction, in addition to the mass-saving geometry of hollow particles.

  9. A Review of TiNiPdCu Alloy System for High Temperature Shape Memory Applications

    Science.gov (United States)

    Khan, M. Imran; Kim, Hee Young; Miyazaki, Shuichi

    2015-06-01

    High temperature shape memory alloys (HTSMAs) are important smart materials and possess a significant potential to improve many engineering systems. Many TiNi-based high temperature ternary alloy systems have been reported in literature including TiNiPd, TiNiPt, TiNiZr, TiNiAu, TiNiHf, etc. Some quaternary additions of certain elements in the above systems have been successful to further improve many important shape memory and mechanical properties. The success criteria for an HTSMA become strict in terms of its cyclic stability, maximum recoverable strain, creep resistance, and corrosion resistance at high temperatures. TiNiPdCu alloy system has been recently proposed as a promising HTSMA. Unique nanoscaled precipitates formed in TiNiPdCu-based HTSMAs are found to be stable at temperatures above 773 K, while keeping the benefits of ease of fabrication. It is expected that this alloy system possesses significant potential especially for the high temperature shape memory applications. Till now many research reports have been published on this alloy system. In the present work, a comprehensive review of the TiNiPdCu system is presented in terms of thermomechanical behavior, nanoscale precipitation mechanism, microstructural features, high temperature shape memory and mechanical properties, and the important parameters to control the high temperature performance of these alloys.

  10. Monometallic Pd and Pt and Bimetallic Pd-Pt/Al2O3-TiO2 for the HDS of DBT: Effect of the Pd and Pt Incorporation Method

    Directory of Open Access Journals (Sweden)

    Reynaldo Martínez Guerrero

    2014-01-01

    Full Text Available The effect of the preparation method of monometallic Pd and Pt and bimetallic Pd-Pt/Al2O3-TiO2 catalysts on the hydrodesulfurization (HDS of dibenzothiophene (DBT was investigated in this study. The synthesis was accomplished using three methods: (A impregnation, (B metal organic chemical vapor deposition (MOCVD, and (C impregnation-MOCVD. The bimetallic Pd-Pt catalyst prepared by the impregnation-MOCVD method was most active for the HDS of DBT compared to those prepared by the single impregnation or MOCVD method due to the synergetic effect between both noble metals. The greater selectivity toward biphenyl indicated that this bimetallic Pd-Pt catalyst preferentially removes sulfur via the direct desulfurization mechanism. However, the bimetallic Pd-Pt catalyst prepared using the single MOCVD method did not produce any cyclohexylbenzene, which is most likely associated with the hydrogenation/dehydrogenation sites.

  11. Magnetic phase transitions in UNi 1-xPd xGe and UPd 1-yPt yGe

    Science.gov (United States)

    Kawamata, S.; Ishimoto, K.; Yamaguchi, Y.; Iwasaki, H.; Kobayashi, N.

    1993-05-01

    Magnetizations were measured for both UNi 1- xPd xGe ( x = 0.0, 0.25, 0.5, 0.75) and UPd 1- yPt yGe( y = 0.0, 0.25, 0.5,0.75, 1.0) systems. UNi 1-xPd xGe shows a sinusoidal magnetic transition with TN ≃ 55 K followed by fe rromagnetic trans-formation below 40 K. Pd rich UPd 1-yPt yGe undergoes a ferromagnetic state with Tc lower than 60 K, while the Pt rich UPd 1-yPt yGe compounds reveal cycloidal magnetic transition around 50 K. The mechanism by which various magnetic phases appear in UTGE (T = Ni, Pd, Pt) is considered to be due to competition of the exchange interactions in the bc-plane accompanied by a change in transition metals.

  12. CO adsorption on ionic Pt, Pd and Cu sites in Ce MxO 2− (M= Pt 2 ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 123; Issue 4. CO adsorption on ionic Pt, Pd and Cu sites in Ce1−MxO2− (M=Pt2+, Pd2+, Cu2+). Gargi Dutta Asha Gupta Umesh V Waghmare M S Hegde. Volume 123 Issue 4 July 2011 pp 509-516 ...

  13. Localized Pd Overgrowth on Cubic Pt Nanocrystals for Enhanced Electrocatalytic Oxidation of Formic Acid

    Energy Technology Data Exchange (ETDEWEB)

    Lee, H.; Habas, S.E.; Somorjai, G.A.; Yang, P.

    2008-03-20

    Binary Pt/Pd nanoparticles were synthesized by localized overgrowth of Pd on cubic Pt seeds for the investigation of electrocatalytic formic acid oxidation. The binary particles exhibited much less self-poisoning and a lower activation energy relative to Pt nanocubes, consistent with the single crystal study.

  14. Electrochemically deposited Pd-Pt and Pd-Au codeposits on graphite electrodes for electrocatalytic H2O2 reduction.

    Science.gov (United States)

    Nagaiah, Tharamani Chikka; Schäfer, Dominik; Schuhmann, Wolfgang; Dimcheva, Nina

    2013-08-20

    Improved electrocatalytic activity and selectivity for the reduction of H2O2 were obtained by electrodepositing Pd-Pt and Pd-Au on spectrographic graphite from solutions containing salts of the two metals at varying ratio. The electrocatalytic activity of the resulting binary codeposits for H2O2 reduction was evaluated by means of the redox-competition mode of scanning electrochemical microscopy (SECM) and voltammetric methods. In a potential range from 0 to -600 mV (vs. Ag/AgCl/3 M KCl) at pH 7.0 in 0.1 M phosphate citrate buffer, the electrocatalytic activity of both Pd-Pt and Pd-Au codeposits was substantially improved as compared with the identically deposited single metals suggesting an electrocatalytic synergy of the codeposits. Pd-Pt and Pd-Au codeposits were characterized by X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM). Codepositing with Au caused a change of hedgehog-like shaped Pd nanoparticles into cauliflower-like nanoparticles with the particle size decreasing with increasing Au concentration. Codepositing Pd with Pt caused the formation of oblong structures with the size initially increasing with increasing Pt content. However, the particle size decreases with further increase in Pt concentration. The improved electrocatalytic capability for H2O2 reduction of the Pd-Pt electrodeposits on graphite was further demonstrated by immobilizing glucose oxidase as a basis for the development of an interference-free amperometric glucose biosensor.

  15. Carbon supported Pd-Ni and Pd-Ru-Ni nanocatalysts for the alkaline direct ethanol fuel cell (DEFC)

    CSIR Research Space (South Africa)

    Mathe, MK

    2011-08-01

    Full Text Available Carbon supported Pd-Ni and Pd-Ru-Ni nanocatalysts were prepared by the chemical reduction method, using sodium borohydride and ethylene glycol mixture as the reducing agent. The catalytic activity towards ethanol electro-oxidation in alkaline medium...

  16. Corrosion resistance of amorphous and crystalline Pd40Ni40P20 alloys in aqueous solutions

    DEFF Research Database (Denmark)

    Wu, Y.F.; Chiang, Wen-Chi; Chu, J.

    2006-01-01

    The corrosion behaviors of amorphous and crystalline Pd40Ni40P20 alloys in various aqueous solutions are reported in this paper. The corrosion resistance of crystalline (annealed) Pd40Ni40P20 is better than that of amorphous Pd40Ni40P20 in various corrosive solutions, due to crystalline Pd40Ni40P20...... and mainly consists of inert Pd5P2, NI3P, Ni2Pd2P and noble Pd phases. These inert and noble properties result in a higher corrosion resistance in crystalline Pd40Ni40P20....

  17. Synthesis, characterization and antibacterial activity of polyaniline/Pt-Pd nanocomposite.

    Science.gov (United States)

    Boomi, Pandi; Prabu, Halliah Gurumallesh; Mathiyarasu, Jayaraman

    2014-01-24

    Pt colloid and Pt-Pd colloid, pristine polyaniline, polyaniline/Pt nanocomposite and polyaniline/Pt-Pd nanocomposite were synthesized by simple chemical method. They were characterized by UV-Vis, FT-IR, XRD, TGA, SEM, HR-SEM and HR-TEM with EDAX techniques. The results proved that there is a strong interaction between metal nanoparticles (Pt-Pd) and polyaniline chains. This interaction creates changes in the backbone chain of polyaniline/Pt-Pd nanocomposite when compared to pristine polyaniline. The synthesized materials were evaluated for antibacterial activity, minimal inhibitory concentration and minimal bactericidal concentration. The results indicated that the nanocomposites exhibited improved antibacterial activity when compared to pristine polyaniline and individual metal colloids. This is the first report on the chemical synthesis of polyaniline/Pt-Pd nanocomposite, which exhibits antibacterial activity at micro molar concentration levels. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  18. Methods to synthesize NiPt bimetallic nanoparticles by a reversed-phase microemulsion, deposition of NiPt bimetallic nanoparticles on a support, and application of the supported catalyst for CO2 reforming of methane

    KAUST Repository

    Biausque, Gregory

    2015-09-24

    Embodiments of the present disclosure provide for NiPt nanoparticles, compositions and supports including NiPt nanoparticles, methods of making NiPt nanoparticles, methods of supporting NiPt nanoparticles, methods of using NiPt nanoparticles, and the like.

  19. Study of hyperfine interactions in intermetallic compounds Gd(Ni,Pd,Cu)In, Tb(Ni,Pd)In, Dy(Ni,Pd)In and Ho(Ni,Pd)In; Estudo de interacoes hiperfinas em compostos intermetalicos Gd(Ni,Pd,Cu)In, Tb(Ni,Pd)In, Dy(Ni,Pd)In e Ho(Ni,Pd)In

    Energy Technology Data Exchange (ETDEWEB)

    Lapolli, Andre Luis

    2006-07-01

    Systematic behavior of magnetic hyperfine field (B{sub hf}) in the intermetallic compounds Gd(Ni,Pd,Cu)In Tb(Ni,Pd)In, Dy(Ni,Pd)In and Ho(Ni,Pd)In was studied by Perturbed Gamma-Gamma Angular Correlation spectroscopy. The measurements of B{sub hf} were carried out at the rare earth atom and in sites using the nuclear probes {sup 140}Ce and {sup 11}'1Cd respectively. The variation of hyperfine field with temperature, in most cases, follows the Brillouin function predicted from the molecular field theory. The hyperfine field values at rare earth atom sites obtained from {sup 140}Ce probe as well as at in sites obtained from {sup 111}Cd probe for each series of compounds were extrapolated to zero Kelvin B{sub hf}(T=0) from these curves. These values were compared with the values of the literature for other compounds containing the same rare earth element and all of them show a linear relationship with the ordering temperature. This indicates that the main contribution to B{sub hf} comes from the conduction electron polarization (CEP) through Fermi contact interaction and the principal mechanism of magnetic interaction in these compounds can be described by the RKKY type interaction. The values of B{sub hf}(T=0) for each family of intermetallic compounds RNiIn and RPdIn when plotted as a function of 4f spin projection of rare earth element also shows a linear relationship. Exceptions are the results for the compounds RNiIn obtained with {sup 111}Cd probe where a small deviation from linearity is observed. The results of the measurements carried out with the {sup 111}Cd probe were also analyzed to obtain the hyperfine parameters of the quadrupole interaction as a function of temperature for RPdln and GdNiIn compounds. The results show that for the compound GdPdIn there might be some Gd-In disorder at high temperature. (author)

  20. Bulk ordering and surface segregation in Ni50Pt50

    DEFF Research Database (Denmark)

    Pourovskii, L.P.; Ruban, Andrei; Abrikosov, I.A.

    2001-01-01

    in the bulk compare well with experimental data. The surface-alloy compositions for the (111) and (110) facets above the ordering transition temperature are also found to be in a good agreement with experiments. It is demonstrated that the segregation profile at the (110) surface of NiPt is mainly caused...... by the unusually strong segregation of Pt into the second layer and the interlayer ordering due to large chemical nearest-neighbor interactions....

  1. Influence of Ni doping on PtNi nanoparticles: Synthesis, electronic/atomic structure and photocatalyst investigations

    Science.gov (United States)

    Varshney, Mayora; Sharma, Aditya; Shin, Hyun-Joon; Lee, Hyun Hwi; Jeon, Tae-Yeol; Lee, Byeong-Hyeon; Chae, Keun-Hwa; Won, Sung Ok

    2017-11-01

    Carbon-supported Pt and PtNi nanoparticles (NPs) were synthesized using a borohydride reduction method. Structural properties were studied by synchrotron X-ray diffraction (XRD) and the size/shape of the NPs was determined by transmission electron microscope (TEM). X-ray absorption spectroscopy with its two amendments; X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), has been employed to investigate the local electronic/atomic structure surrounding the Pt and Ni atoms. XANES results, at Pt L3-edge and Ni K-edge, have shown fractional oxidation of Pt and Ni atoms. The Pt3Ni1NPs have exhibited a lower bond distance of Pt-Ni shell and higher coordination number of Pt-Ni shells, indicating the alloy formation between Pt and Ni. We further have demonstrated that the Pt and PtNi NPs can serve as effective photocatalysts towards the degradation of water pollutant dye (methyl orange (MO)). By considering the interband charge-transfer of Pt (5d →6sp), a tentative mechanism is proposed to understand the photocatalytic degradation of MO dye molecules by Pt/PtNi NPs under the light irradiation.

  2. PtNi nanoparticles embedded in porous silica microspheres as ...

    Indian Academy of Sciences (India)

    pension of SiO2 microspheres. H2PtCl6·6H2O aqueous solution (0.03352 mol/L, 0.08 mL) and Ni(NO3)2·6H2O. (0.9 mg) (with initial mass ratio of Pt:Ni=3:1) were dis- solved in ethylene glycol (20 mL). Then, this metal salt solution was added to the above SiO2 suspension fol- lowed by addition of hydrazine hydrate (85 wt% ...

  3. Structural characterization of Pt-Pd and Pd-Pt core-shell nanoclusters at atomic resolution.

    Science.gov (United States)

    Sanchez, Sergio I; Small, Matthew W; Zuo, Jian-min; Nuzzo, Ralph G

    2009-06-24

    We describe the results of a study at atomic resolution of the structures exhibited by polymer-capped monometallic and bimetallic Pt and Pd nanoclusters--models for nanoscale material electrocatalysts--as carried out using an aberration-corrected scanning transmission electron microscope (STEM). The coupling of sub-nanometer resolution with Z-contrast measurements provides unprecedented insights into the atomic structures and relative elemental speciation of Pt and Pd within these clusters. The work further defines the nature of deeply quenched states that prevent facile conversions of core-shell motifs to equilibrium alloys and the nature of nonidealities such as twinning (icosahedral cores) and atomic segregation that these structures can embed. The nature of the facet structure present in these model systems is revealed by theory directed modeling in which experimental intensity profiles obtained in Z-contrast measurements at atomic resolution are compared to simulated intensity profiles using theoretically predicted cluster geometries. These comparisons show close correspondences between experiment and model and highlight striking structural complexities in these systems that are compositionally sensitive and subject to amplification by subsequent cluster growth processes. The work demonstrates an empowering competency in nanomaterials research for STEM measurements carried out using aberration corrected microscopes, approaches that hold considerable promise for characterizing the structure of these and other important catalytic materials systems at the atomic scale.

  4. The synthesis of PdPt/carbon paper via surface limited redox replacement reactions for oxygen reduction reaction

    CSIR Research Space (South Africa)

    Motsoeneng, RG

    2015-09-01

    Full Text Available Surface-limited redox replacement reactions using the electrochemical atomic layer deposition (EC-ALD) technique were used to synthesize PdPt bimetallic electrocatalysts on carbon paper substrate. Electrocatalysts having different Pd:Pt ratio were...

  5. Mechanistic aspects of the ethanol steam reforming reaction for hydrogen production on Pt, Ni, and PtNi catalysts supported on gamma-Al2O3.

    Science.gov (United States)

    Sanchez-Sanchez, Maria Cruz; Navarro Yerga, Rufino M; Kondarides, Dimitris I; Verykios, Xenophon E; Fierro, Jose Luis G

    2010-03-25

    Mechanistic aspects of ethanol steam reforming on Pt, Ni, and PtNi catalysts supported on gamma-Al(2)O(3) are investigated from the analysis of adsorbed species and gas phase products formed on catalysts during temperature-programmed desorption of ethanol and during ethanol steam reforming reaction. DRIFTS-MS analyses of ethanol decomposition and ethanol steam reforming reactions show that PtNi and Ni catalysts are more stable than the Pt monometallic counterpart. Ethanol TPD results on Ni, Pt, and NiPt catalysts point to ethanol dehydrogenation and acetaldehyde decomposition as the first reaction pathways of ethanol steam reforming over the studied catalysts. The active sites responsible for the acetaldehyde decomposition are easily deactivated in the first minutes on-stream by carbon deposits. For Ni and PtNi catalysts, a second reaction pathway, consisting in the decomposition of acetate intermediates formed over the surface of alumina support, becomes the main reaction pathway operating in steam reforming of ethanol once the acetaldehyde decomposition pathway is deactivated. Taking into account the differences observed in the mechanism of ethanol decomposition, the better stability observed for PtNi catalyst is proposed to be related with a cooperative effect between Pt and Ni activities together with the enhanced ability of Ni to gasify the methyl groups formed by decomposition of acetate species. On the contrary, monometallic catalysts are believed to dehydrogenate these methyl groups forming coke that leads to deactivation of metal particles.

  6. Numerical Prediction of the Thermodynamic Properties of Ternary Al-Ni-Pd Alloys

    Science.gov (United States)

    Zagula-Yavorska, Maryana; Romanowska, Jolanta; Kotowski, Sławomir; Sieniawski, Jan

    2016-01-01

    Thermodynamic properties of ternary Al-Ni-Pd system, such as exGAlNPd, µAl(AlNiPd), µNi(AlNiPd) and µPd(AlNiPd) at 1,373 K, were predicted on the basis of thermodynamic properties of binary systems included in the investigated ternary system. The idea of predicting exGAlNiPd values was regarded as calculation of values of the exG function inside a certain area (a Gibbs triangle) unless all boundary conditions, that is values of exG on all legs of the triangle are known (exGAlNi, exGAlPd, exGNiPd). This approach is contrary to finding a function value outside a certain area, if the function value inside this area is known. exG and LAl,Ni,Pd ternary interaction parameters in the Muggianu extension of the Redlich-Kister formalism were calculated numerically using the Excel program and Solver. The accepted values of the third component xx differed from 0.01 to 0.1 mole fraction. Values of LAlNiPd parameters in the Redlich-Kister formula are different for different xx values, but values of thermodynamic functions: exGAlNiPd, µAl(AlNiPd), µNi(AlNiPd) and µPd(AlNiPd) do not differ significantly for different xx values. The choice of xx value does not influence the accuracy of calculations.

  7. Tailoring Silica-alumina Supported Pt-Pd As Poison Tolerant Catalyst For Aromatics Hydrogenation

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Yanzhe; Gutierrez, Oliver Y.; Haller, Gary L.; Colby, Robert J.; Kabius, Bernd C.; Rob van Veen, J. A.; Jentys, Andreas; Lercher, Johannes A.

    2013-08-01

    The tailoring of the physicochemical and catalytic properties of mono- and bimetallic Pt-Pd catalysts supported on amorphous silica-alumina is studied. Electron energy loss spectroscopy and extended X-ray absorption fine structure analyses indicated that bimetallic Pt-Pd and relatively large monometallic Pd particles were formed, whereas the X-ray absorption near edge structure provided direct evidence for the electronic deficiency of the Pt atoms. The heterogeneous distribution of metal particles was also shown by high resolution transmission electron microscopy. The average structure of the bimetallic particles (Pt-rich core and Pd-rich shell) and the presence of Pd particles led to surface Pd enrichment, which was independently shown by IR spectra of adsorbed CO. The specific metal distribution, average size, and surface composition of the Pt-Pd particles depend to a large extent on the metal precursors. In the presence of NH3 ligands, Pt-Pd particles with a fairly homogeneous bulk and surface metal distribution were formed. Also high Lewis acid site concentration of the carrier leads to more homogeneous bimetallic particles. All catalysts were active for the hydrogenation of tetralin in the absence and presence of quinoline and dibenzothiophene (DBT). Monometallic Pt catalysts had the highest hydrogenation activity in poison-free and quinoline-containing feed. When DBT was present, bimetallic Pt-Pd catalysts with the most homogenous metal distribution showed the highest activity. The higher resistance of bimetallic catalysts towards sulfur poisoning compared to their monometallic Pt counterparts results from the weakened metal-sulfur bond on the electron deficient Pt atoms. Thus, increasing the fraction of electron deficient Pt on the surface of the bimetallic particles increases the efficiency of the catalyst in the presence of sulfur.

  8. Pt-Ni and Pt-Co Catalyst Synthesis Route for Fuel Cell Applications

    Science.gov (United States)

    Firdosy, Samad A.; Ravi, Vilupanur A.; Valdez, Thomas I.; Kisor, Adam; Narayan, Sri R.

    2013-01-01

    Oxygen reduction reactions (ORRs) at the cathode are the rate-limiting step in fuel cell performance. The ORR is 100 times slower than the corresponding hydrogen oxidation at the anode. Speeding up the reaction at the cathode will improve fuel cell efficiency. The cathode material is generally Pt powder painted onto a substrate (e.g., graphite paper). Recent efforts in the fuel cell area have focused on replacing Pt with Pt-X alloys (where X = Co, Ni, Zr, etc.) in order to (a) reduce cost, and (b) increase ORR rates. One of these strategies is to increase ORR rates by reducing the powder size, which would result in an increase in the surface area, thereby facilitating faster reaction rates. In this work, a process has been developed that creates Pt-Ni or Pt-Co alloys that are finely divided (on the nano scale) and provide equivalent performance at lower Pt loadings. Lower Pt loadings will translate to lower cost. Precursor salts of the metals are dissolved in water and mixed. Next, the salt mixtures are dried on a hot plate. Finally, the dried salt mixture is heattreated in a furnace under flowing reducing gas. The catalyst powder is then used to fabricate a membrane electrode assembly (MEA) for electrochemical performance testing. The Pt- Co catalyst-based MEA showed comparable performance to an MEA fabri cated using a standard Pt black fuel cell catalyst. The main objective of this program has been to increase the overall efficiencies of fuel cell systems to support power for manned lunar bases. This work may also have an impact on terrestrial programs, possibly to support the effort to develop a carbon-free energy source. This catalyst can be used to fabricate high-efficiency fuel cell units that can be used in space as regenerative fuel cell systems, and terrestrially as primary fuel cells. Terrestrially, this technology will become increasingly important when transition to a hydrogen economy occurs.

  9. Chemical bonding in transition metal complexes with beryllium ligands [(PMe(3))(2)M-BeCl(2)], [(PMe(3))(2)M-BeClMe], and [(PMe(3))(2)M-BeMe(2)] (M = Ni, Pd, Pt).

    Science.gov (United States)

    Parameswaran, Pattiyil; Frenking, Gernot

    2010-08-26

    The equilibrium geometries and bond dissociation energies of the 14 valence electron (VE) complexes [(PMe(3))(2)M-BeCl(2)], [(PMe(3))(2)M-BeClMe], and [(PMe(3))(2)M-BeMe(2)] with M = Ni, Pd, and Pt have been calculated using density functional theory at the BP86/TZ2P level. The nature of the M-Be bond was analyzed with the NBO charge decomposition analysis and the EDA energy decomposition analysis. The theoretical results predict the equilibrium structures with a T-shaped geometry at the transition metal where the PMe(3) ligands are in the axial positions. The calculated bond dissociation energies show that the M-E bond strengths are in the range of donor-acceptor complexes of divalent beryllium compounds with ammonia. The bond strength decreases when the substituent at beryllium changes from Cl to CH(3). The NBO analysis shows a negative charge at the BeX(2) fragment, which indicates a net charge flow from the transition metal fragment to the beryllium fragment. The energy decomposition analysis of the M-Be bonds suggests two donor-acceptor bonds with sigma and pi symmetry where the transition metal fragment is a double donor with respect to the beryllium ligand. The pi component of the [Ni]-->BeXX' donation is much smaller than the sigma component.

  10. Ternary Pt-Ru-Ni catalytic layers for methanol electrooxidation prepared by electrodeposition and galvanic replacement

    Directory of Open Access Journals (Sweden)

    Athanasios ePapaderakis

    2014-06-01

    Full Text Available Ternary Pt-Ru-Ni deposits on glassy carbon substrates, Pt-Ru(Ni/GC, have been formed by initial electrodeposition of Ni layers onto glassy carbon electrodes, followed by their partial exchange for Pt and Ru, upon their immersion into equimolar solutions containing complex ions of the precious metals. The overall morphology and composition of the deposits has been studied by SEM microscopy and EDS spectroscopy. Continuous but nodular films have been confirmed, with a Pt÷Ru÷Ni % bulk atomic composition ratio of 37÷12÷51 (and for binary Pt-Ni control systems of 47÷53. Fine topographical details as well as film thickness have been directly recorded using AFM microscopy. The composition of the outer layers as well as the interactions of the three metals present have been studied by XPS spectroscopy and a Pt÷Ru÷Ni % surface atomic composition ratio of 61÷12÷27 (and for binary Pt-Ni control systems of 85÷15 has been found, indicating the enrichment of the outer layers in Pt; a shift of the Pt binding energy peaks to higher values was only observed in the presence of Ru and points to an electronic effect of Ru on Pt. The surface electrochemistry of the thus prepared Pt-Ru(Ni/GC and Pt(Ni/GC electrodes in deaerated acid solutions (studied by cyclic voltammetry proves the existence of a shell consisting exclusively of Pt-Ru or Pt. The activity of the Pt-Ru(Ni deposits towards methanol oxidation (studied by slow potential sweep voltammetry is higher from that of the Pt(Ni deposit and of pure Pt; this enhancement is attributed both to the well-known Ru synergistic effect due to the presence of its oxides but also (based on the XPS findings to a modification effect of Pt electronic properties.

  11. Oxide Scales Formed on NiTi and NiPtTi Shape Memory Alloys

    Science.gov (United States)

    Smialek, James L.; Garg, Anita; Rogers, Richard B.; Noebe, Ronald D.

    2011-01-01

    Ni-49Ti and Ni-30Pt-50Ti (at.%) shape memory alloys were oxidized isothermally in air over the temperature range of 500 to 900 C. The microstructure, composition, and phase content of the scales were studied by SEM, EDS, XRD, and metallography. Extensive plan view SEM/EDS identified various features of intact or spalled scale surfaces. The outer surface of the scale was a relatively pure TiO2 rutile structure, typified by a distinct highly striated and faceted crystal morphology. Crystal size increased significantly with temperature. Spalled regions exhibited some porosity and less distinct features. More detailed information was obtained by correlation of SEM/EDS studies of 700 C/100 hr cross-sections with XRD analyses of serial or taper-polishing of plan surfaces. Overall, multiple layers exhibited graded mixtures of NiO, TiO2, NiTiO3, Ni(Ti) or Pt(Ni,Ti) metal dispersoids, Ni3Ti or Pt3Ti depletion zones, and substrate, in that order. The NiTi alloy contained a 3 at.% Fe impurity that appeared in embedded localized Fe-Ti-rich oxides, while the NiPtTi alloy contained a 2 v/o dispersion of TiC that appeared in lower layers. The oxidation kinetics of both alloys (in a previous report) indicated parabolic growth and an activation energy (250 kJ/mole) near those reported in other Ti and NiTi studies. This is generally consistent with TiO2 existing as the primary scale constituent, as described here.

  12. Correlation between Mechanical Behavior and Actuator-type Performance of Ni-Ti-Pd High-temperature Shape Memory Alloys

    Science.gov (United States)

    Bigelow, Glen S.; Padula, Santo A., II; Garg, Anita; Noebe, Ronald D.

    2007-01-01

    High-temperature shape memory alloys in the NiTiPd system are being investigated as lower cost alternatives to NiTiPt alloys for use in compact solid-state actuators for the aerospace, automotive, and power generation industries. A range of ternary NiTiPd alloys containing 15 to 46 at.% Pd has been processed and actuator mimicking tests (thermal cycling under load) were used to measure transformation temperatures, work behavior, and dimensional stability. With increasing Pd content, the work output of the material decreased, while the amount of permanent strain resulting from each load-biased thermal cycle increased. Monotonic isothermal tension testing of the high-temperature austenite and low temperature martensite phases was used to partially explain these behaviors, where a mismatch in yield strength between the austenite and martensite phases was observed at high Pd levels. Moreover, to further understand the source of the permanent strain at lower Pd levels, strain recovery tests were conducted to determine the onset of plastic deformation in the martensite phase. Consequently, the work behavior and dimensional stability during thermal cycling under load of the various NiTiPd alloys is discussed in relation to the deformation behavior of the materials as revealed by the strain recovery and monotonic tension tests.

  13. Stability and the Electronic Structure of XB2 (X = Pt, Ir, Pd, Rh, Os Diborides

    Directory of Open Access Journals (Sweden)

    Popoola A.I.

    2017-08-01

    Full Text Available First-principle calculations have been performed to investigate the structural and electronic properties of platinum group metal diborides in the stoichiometry XB2 (X = Pt, Ir, Pd, Rh, Os. All investigated compounds have shown to belong to the orthorhombic Pmmn space group rather than the C2/m previously predicted in some of the compositions. Compressibility will reduce with boron addition in Pt, Pd and Rh, but will increase with boron addition into Ir and Os. The electronic density of states show that all the compounds are metals, with PtB2, PdB2 and OsB2 being potentially incompressible and superhard materials.

  14. Effective adsorption/electrocatalytic degradation of perchlorate using Pd/Pt supported on N-doped activated carbon fiber cathode

    International Nuclear Information System (INIS)

    Yao, Fubing; Zhong, Yu; Yang, Qi; Wang, Dongbo; Chen, Fei; Zhao, Jianwei; Xie, Ting; Jiang, Chen; An, Hongxue; Zeng, Guangming; Li, Xiaoming

    2017-01-01

    Highlights: • Pd/Pt-NACF served as an adsorption/electrocatalysis electrode to reduce perchlorate. • The possible mechanisms involved in the reaction process were explained. • The reusability and stability of Pd/Pt-NACF bifunctional material was evaluated. - Abstract: In this work, Pd/Pt supported on N-doped activated carbon fiber (Pd/Pt-NACF) was employed as the electrode for electrocatalytic degradation of perchlorate through adsorption/electroreduction process. Perchlorate in solution was firstly adsorbed on Pd/Pt-NACF and then reduced to non-toxic chloride by the catalytic function of Pd/Pt at a constant current (20 mA). Compared with Pd/Pt-ACF, the adsorption capacity and electrocatalytic degradation efficiency of Pd/Pt-NACF for perchlorate increased 161% and 28%, respectively. Obviously, positively charged N-functional groups on NACF surface enhanced the adsorption capacity of Pd/Pt-NACF, and the dissociation of hydrogen to atomic H* by the Pd/Pt nanostructures on the cathode might drastically promote the electrocatalytic reduction of perchlorate. The role of atomic H* in the electroreduction process was identified by tertiary butanol inhibition test. Meanwhile, the perchlorate degradation performance was not substantially lower after three successive adsorption/electrocatalytic degradation experiments, demonstrating the electrochemical reusability and stability of the as-prepared electrode. These results showed that Pd/Pt-NACF was effective for electrocatalytic degradation of perchlorate and had great potential in perchlorate removal from water.

  15. One‐Electron Oxidation of [M(PtBu3)2] (M=Pd, Pt): Isolation of Monomeric [Pd(PtBu3)2]+ and Redox‐Promoted C−H Bond Cyclometalation

    Science.gov (United States)

    Troadec, Thibault; Tan, Sze‐yin; Wedge, Christopher J.; Rourke, Jonathan P.; Unwin, Patrick R.

    2016-01-01

    Abstract Oxidation of zero‐valent phosphine complexes [M(PtBu3)2] (M=Pd, Pt) has been investigated in 1,2‐difluorobenzene solution using cyclic voltammetry and subsequently using the ferrocenium cation as a chemical redox agent. In the case of palladium, a mononuclear paramagnetic PdI derivative was readily isolated from solution and fully characterized (EPR, X‐ray crystallography). While in situ electrochemical measurements are consistent with initial one‐electron oxidation, the heavier congener undergoes C−H bond cyclometalation and ultimately affords the 14 valence‐electron PtII complex [Pt(κ 2 PC‐PtBu2CMe2CH2)(PtBu3)]+ with concomitant formation of [Pt(PtBu3)2H]+. PMID:26879233

  16. Seed-mediated synthesis of cross-linked Pt-NiO nanochains for methanol oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Gu, Zhulan; Bin, Duan; Feng, Yue; Zhang, Ke; Wang, Jin; Yan, Bo; Li, Shumin; Xiong, Zhiping; Wang, Caiqin; Shiraishi, Yukihide; Du, Yukou, E-mail: duyk@suda.edu.cn

    2017-07-31

    Highlights: • Cross-linked Pt-NiO nanochains using seed-mediated growth method are synthesized. • The as-prepared catalysts exhibit higher electrocatalytic activity than Pt/C for MOR. • The Pt-NiO(1:1 by molar) catalyst shows the best electrocatalytic property towards MOR. - Abstract: A simple method was reported for employing NiO nanoparticles act as seeds and then different amounts of Pt{sup 2+} were reduced on the NiO nanoparticles, forming a cross-linked Pt-NiO nanocatalysts. These as-prepared catalysts were characterized using different physical-chemical techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The results indicate that the morphology of the cross-linked Pt-NiO nanochain was successfully produced regardless of the molar ratio of Pt{sup 2+} to NiO precursors. The electrochemical characteristics of Pt-NiO nanochain catalysts were evaluated for the oxidation of methanol as a model reaction, which verify that the Pt-NiO catalysts show enhanced activity and high stability in comparison with the commercial Pt/C catalyst. The optimized ratio of Pt to NiO is 1:1, then tuned by simple adjusting the feed ratio of the precursors as well. The synthesized nanocatalysts will be found the great potential applications as electrocatalysts for fuel cells owe to their enhanced catalytic performance and long-term stability.

  17. Seed-mediated synthesis of cross-linked Pt-NiO nanochains for methanol oxidation

    International Nuclear Information System (INIS)

    Gu, Zhulan; Bin, Duan; Feng, Yue; Zhang, Ke; Wang, Jin; Yan, Bo; Li, Shumin; Xiong, Zhiping; Wang, Caiqin; Shiraishi, Yukihide; Du, Yukou

    2017-01-01

    Highlights: • Cross-linked Pt-NiO nanochains using seed-mediated growth method are synthesized. • The as-prepared catalysts exhibit higher electrocatalytic activity than Pt/C for MOR. • The Pt-NiO(1:1 by molar) catalyst shows the best electrocatalytic property towards MOR. - Abstract: A simple method was reported for employing NiO nanoparticles act as seeds and then different amounts of Pt 2+ were reduced on the NiO nanoparticles, forming a cross-linked Pt-NiO nanocatalysts. These as-prepared catalysts were characterized using different physical-chemical techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The results indicate that the morphology of the cross-linked Pt-NiO nanochain was successfully produced regardless of the molar ratio of Pt 2+ to NiO precursors. The electrochemical characteristics of Pt-NiO nanochain catalysts were evaluated for the oxidation of methanol as a model reaction, which verify that the Pt-NiO catalysts show enhanced activity and high stability in comparison with the commercial Pt/C catalyst. The optimized ratio of Pt to NiO is 1:1, then tuned by simple adjusting the feed ratio of the precursors as well. The synthesized nanocatalysts will be found the great potential applications as electrocatalysts for fuel cells owe to their enhanced catalytic performance and long-term stability.

  18. Effects of metal composition and ratio on peptide-templated multimetallic PdPt nanomaterials

    International Nuclear Information System (INIS)

    Merrill, Nicholas A.; Nitka, Tadeusz T.; McKee, Erik M.; Merino, Kyle C.; Drummy, Lawrence F.

    2017-01-01

    It can be difficult to simultaneously control the size, composition, and morphology of metal nanomaterials under benign aqueous conditions. For this, bioinspired approaches have become increasingly popular due to their ability to stabilize a wide array of metal catalysts under ambient conditions. In this regard, we used the R5 peptide as a three-dimensional template for formation of PdPt bimetallic nanomaterials. Monometallic Pd and Pt nanomaterials have been shown to be highly reactive toward a variety of catalytic processes, but by forming bimetallic species, increased catalytic activity may be realized. The optimal metal-to-metal ratio was determined by varying the Pd:Pt ratio to obtain the largest increase in catalytic activity. To better understand the morphology and the local atomic structure of the materials, the bimetallic PdPt nanomaterials were extensively studied by transmission electron microscopy, extended X-ray absorption fine structure spectroscopy, X-ray photoelectron spectroscopy, and pair distribution function analysis. The resulting PdPt materials were determined to form multicomponent nanostructures where the Pt component demonstrated varying degrees of oxidation based upon the Pd:Pt ratio. To test the catalytic reactivity of the materials, olefin hydrogenation was conducted, which indicated a slight catalytic enhancement for the multicomponent materials. Finally, these results suggest a strong correlation between the metal ratio and the stabilizing biotemplate in controlling the final materials morphology, composition, and the interactions between the two metal species.

  19. Crystallization in Pd40Ni40P20 glass

    DEFF Research Database (Denmark)

    Jiang, Jianzhong; Saksl, K.; Nishiyama, N.

    2002-01-01

    Phase segregation and the effect of pressure on crystallization of bulk and ribbon Pd40Ni40P20 glasses have been studied by means of differential scanning calorimetry (DSC) and x-ray diffraction. The DSC measurements show only one glass transition event in the samples annealed at different...... temperatures in the supercooled liquid region. Phase analyses reveal at least five crystalline phases crystallized from the glass: monoclinic; body-centered tetragonal; orthorhombic; Ni2Pd2P and fcc-(Ni,Pd) solid solution phases. In the pressure range from 0 to 4.2 GPa, the crystallization temperature...... increases with pressure having a slope of 11 K/GPa. The eutectic crystallization reaction mode and crystalline phases formed are unchanged in the pressure range used. The enhancement of the crystallization temperature with increasing pressure in the glass can be explained by the suppression of atomic...

  20. Effect of Ni Core Structure on the Electrocatalytic Activity of Pt-Ni/C in Methanol Oxidation

    Science.gov (United States)

    Kang, Jian; Wang, Rongfang; Wang, Hui; Liao, Shijun; Key, Julian; Linkov, Vladimir; Ji, Shan

    2013-01-01

    Methanol oxidation catalysts comprising an outer Pt-shell with an inner Ni-core supported on carbon, (Pt-Ni/C), were prepared with either crystalline or amorphous Ni core structures. Structural comparisons of the two forms of catalyst were made using transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), and methanol oxidation activity compared using CV and chronoamperometry (CA). While both the amorphous Ni core and crystalline Ni core structures were covered by similar Pt shell thickness and structure, the Pt-Ni(amorphous)/C catalyst had higher methanol oxidation activity. The amorphous Ni core thus offers improved Pt usage efficiency in direct methanol fuel cells. PMID:28811402

  1. Effect of Ni Core Structure on the Electrocatalytic Activity of Pt-Ni/C in Methanol Oxidation

    Directory of Open Access Journals (Sweden)

    Vladimir Linkov

    2013-07-01

    Full Text Available Methanol oxidation catalysts comprising an outer Pt-shell with an inner Ni-core supported on carbon, (Pt-Ni/C, were prepared with either crystalline or amorphous Ni core structures. Structural comparisons of the two forms of catalyst were made using transmission electron microscopy (TEM, X-ray diffraction (XRD and X-ray photoelectron spectroscopy (XPS, and methanol oxidation activity compared using CV and chronoamperometry (CA. While both the amorphous Ni core and crystalline Ni core structures were covered by similar Pt shell thickness and structure, the Pt-Ni(amorphous/C catalyst had higher methanol oxidation activity. The amorphous Ni core thus offers improved Pt usage efficiency in direct methanol fuel cells.

  2. Pt-encapsulated Pd-Co nanoalloy electrocatalysts for oxygen reduction reaction in fuel cells.

    Science.gov (United States)

    Sarkar, A; Murugan, A Vadivel; Manthiram, A

    2010-02-16

    Pt-encapsulated Pd(x)Co(100-x) nanoalloy electrocatalysts supported on carbon have been synthesized by a rapid microwave-assisted solvothermal (MW-ST) method within 15 min at as low as 300 degrees C. Subsequently, the samples have been heat treated at 900 degrees C in a reducing gas atmosphere to obtain Pt-Pd-Co nanoalloys. X-ray diffraction (XRD) analysis of the as-synthesized and 900 degrees C heat-treated samples reveals interesting changes in phase compositions and degree of alloying with Co and Pt contents and heat treatment. Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) data of the as-synthesized samples confirm Pt enrichment on the surface of the Pd-Co nanoparticles. Rotating disk electrode (RDE) and single cell proton exchange membrane fuel cell measurements reveal that the as-synthesized Pt-encapsulated Pd(80)Co(20) (i.e., 75 wt % Pd(80)Co(20) + 25 wt % Pt) with 20 wt % total metal loading on carbon or 5 wt % Pt exhibit higher catalytic activity for the oxygen reduction reaction (ORR) compared to Pt with 20 wt % Pt loading on carbon. Significant changes in the catalytic activity for ORR occur on heat treatment at 900 degrees C as a result of changes in the phase composition and increase in particle size. This study demonstrates that the encapsulation of Pd-Co alloys with Pt offers a significant enhancement in activity for ORR per unit mass of Pt, offering a significant cost savings.

  3. Global optimization of bimetallic cluster structures. II. Size-matched Ag-Pd, Ag-Au, and Pd-Pt systems

    Science.gov (United States)

    Rossi, Giulia; Ferrando, Riccardo; Rapallo, Arnaldo; Fortunelli, Alessandro; Curley, Benjamin C.; Lloyd, Lesley D.; Johnston, Roy L.

    2005-05-01

    Genetic algorithm global optimization of Ag-Pd, Ag-Au, and Pd-Pt clusters is performed. The 34- and 38-atom clusters are optimized for all compositions. The atom-atom interactions are modeled by a semiempirical potential. All three systems are characterized by a small size mismatch and a weak tendency of the larger atoms to segregate at the surface of the smaller ones. As a result, the global minimum structures exhibit a larger mixing than in Ag-Cu and Ag-Ni clusters. Polyicosahedral structures present generally favorable energetic configurations, even though they are less favorable than in the case of the size-mismatched systems. A comparison between all the systems studied here and in the previous paper (on size-mismatched systems) is presented.

  4. Seed-mediated synthesis of core/shell FePtM/FePt (M = Pd, Au) nanowires and their electrocatalysis for oxygen reduction reaction.

    Science.gov (United States)

    Guo, Shaojun; Zhang, Sen; Su, Dong; Sun, Shouheng

    2013-09-18

    We report a new seed-mediated growth of FePt over 2.5 nm wide FePtM (M = Pd, Au) nanowires (NWs) into core/shell FePtM/FePt NWs with controlled FePt shell thickness from 0.3 to 1.3 nm. These FePtM/FePt NWs show shell thickness and core composition-dependent electrocatalytic activity for oxygen reduction reaction (ORR) in 0.1 M HClO4. These core/shell FePtM/FePt NWs are generally more active and durable than the corresponding alloy NWs. Among FePtM/FePt NWs, FePt NWs, FePtPd NWs, and commercial Pt studied, the FePtPd/FePt NWs (0.8 nm shell) show the specific activity of 3.47 mA·cm(-2) and the mass activity of 1.68 A/mg Pt at 0.5 V (vs. Ag/AgCl), superior to all other NWs (less than 1.59 mA/cm(2) and 0.82 A/mg Pt for FePtAu/FePt and FePt) as well as the commercial Pt (0.24 mA/cm(2) and 0.141 A/mg Pt). The FePtM/FePt (0.8 nm shell) NWs are also stable in the ORR condition and show no activity decrease after 5000 potential sweeps between 0.4 and 0.8 V (vs Ag/AgCl). They are the most efficient nanocatalyst ever reported for ORR.

  5. Stability issues in Pd-based catalysts: the role of surface Pt in improving the stability and oxygen reduction reaction (ORR) activity.

    Science.gov (United States)

    Singh, R K; Rahul, R; Neergat, M

    2013-08-21

    Carbon-supported Pd and Pd3Co catalysts have been electrochemically characterized in 0.1 M HClO4 solution and we found that both catalysts were unstable. On repeated potential cycling, the electrochemical surface area of the catalysts decreases and the oxygen reduction reaction (ORR) activity suffers. To stabilize surface Pd atoms of both Pd and Pd3Co catalysts, we deposited Pt using adsorbed hydrogen on the catalytically active Pd sites. The Pt : Pd ratio of Pt-coated Pd and Pt-coated Pd3Co catalysts suggests half-a-monolayer coverage of Pt (two hydrogen atoms required for reducing a Pt(2+) ion). The Pt : Pd ratio of Pt-coated Pd3Co catalyst obtained from the simple geometrical hard sphere model, energy-dispersive X-ray spectroscopy (EDS) line scan and bulk EDS agrees very well with that calculated from the hydrogen desorption (H(des)) charge of Pd3Co. At the same time, the Pt : Pd ratio of Pt-coated Pd calculated from the H(des) charge of Pd catalyst is significantly lower than the ratio obtained from the other methods. Thus, the Pt : Pd ratio of the Pt-coated Pd catalyst estimated from the H(des) region of Pd is an underestimation of the composition. This suggests that Pd forms an electrochemically inactive species from the H(upd) region itself and Co in Pd3Co seems to stabilize Pd against oxidation by delaying the formation of electrochemically inactive species to higher potentials above the H(upd) region. The voltammograms along with the peroxide formation characteristics of the catalysts support the above observations. The deposited Pt on the surface of the Pd and Pd3Co catalysts masks active Pd sites from the electrochemical environment and even partial coverage with Pt improves the stability and ORR activity of the catalysts when compared to that of the respective Pt-free counterparts.

  6. Structure determination of chitosan-stabilized Pt and Pd based bimetallic nanoparticles by X-ray photoelectron spectroscopy and transmission electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Lihua; Shafii, Salimah [Faculty of Industrial Science and Technology, Universiti Malaysia Pahang, 26300 Kuantan, Pahang (Malaysia); Nordin, Mohd Ridzuan, E-mail: mridzuan@ump.edu.my [Faculty of Industrial Science and Technology, Universiti Malaysia Pahang, 26300 Kuantan, Pahang (Malaysia); Liew, Kong Yong [Faculty of Industrial Science and Technology, Universiti Malaysia Pahang, 26300 Kuantan, Pahang (Malaysia); Li, Jinlin [Key Laboratory of Catalysis and Materials Science of the State Ethnic Affairs Commission and Ministry of Education, Hubei Province, South-Central University for Nationalities, 430074 Wuhan (China)

    2012-12-14

    Chitosan (CTS)-stabilized bimetallic nanoparticles were prepared at room temperature (rt.) in aqueous solution. Palladium (Pd) and platinum (Pt) were selected as the first metals while iron (Fe) and nickel (Ni) functioned as the second metals. In order to obtain the noble metal core-transition metal shell structures, bimetallic nanoparticles were prepared in a two-step process: the preparation of mono noble metallic (Pd or Pt) nanoparticles and the deposition of transition metals (Fe or Ni) on the surface of the monometallic nanoparticles. The structures of the nanoparticles were studied using X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The XPS results show that Pd and Pt exist mainly in zero valences. The presence of Fe and Ni in the bimetallic nanoparticles affects the binding energy of Pd and Pt. Moreover, the studies of O 1s spectra indicate the presence of Fe or Ni shells. The analyses of TEM micrographs give the particle size and size distributions while the high-resolution TEM (HRTEM) micrographs show the existence of noble metal core lattices. The results confirm the formation of noble metal core-transition metal shell structures. -- Highlights: Black-Right-Pointing-Pointer Chitosan-stabilized bimetallic nanoparticles were prepared at room temperature in aqueous solution. Black-Right-Pointing-Pointer The presence of Fe or Ni shells was proven by XPS study. Black-Right-Pointing-Pointer The existence of noble metal cores covered by amorphous shells was indicated by TEM study. Black-Right-Pointing-Pointer The formation of noble metal core-transition metal shell structures was confirmed.

  7. Low Temperature Transformation of Fe-Pd and Fe-Pt Invar Alloys

    OpenAIRE

    Masaaki, Matsui; Kengo, Adachi; Hidefumi, Asano; Department of Iron and Steel Engineering, Faculty of Engineering Nagoya University; Department of Iron and Steel Engineering, Faculty of Engineering Nagoya University; Department of Iron and Steel Engineering, Faculty of Engineering Nagoya University

    1981-01-01

    Low temperature structures of Fe-Pd and Fe-Pt alloys in the Invar region have been determined by means of low temperature X-ray diffraction experiment. The phase diagrams are obtained. A new fct phase is found in the ordered and disordered Fe-Pt and the disordered Fe-Pd systems. An effect of the degree of order for Fe_3Pt to the structural transformations are examined. The lattice instability of Fe-based fcc Invar alloys are discussed from the low temperature structures with the lattice softe...

  8. Cage-bell Pt-Pd nanostructures with enhanced catalytic properties and superior methanol tolerance for oxygen reduction reaction

    Science.gov (United States)

    Chen, Dong; Ye, Feng; Liu, Hui; Yang, Jun

    2016-04-01

    Precisely tailoring the structure and fully making use of the components of nanoparticles are effective to enhance their catalytic performance for a given reaction. We herein demonstrate the design of cage-bell structured Pt-Pd nanoparticles, where a Pd shell is deliberately selected to enhance the catalytic property and methanol tolerance of Pt for oxygen reduction reaction. This strategy starts with the synthesis of core-shell Pt@Ag nanoparticles, followed by galvanic replacement reaction between the Ag shell and Pd2+ ions to form core-shell-shell Pt@Ag@Ag-Pd nanoparticles with a Pt core and double shells composed of Ag at inner and alloy Ag-Pd at outer, respectively. Then, the core-shell-shell templates are agitated with saturated NaCl solution to eliminate the Ag component from the double shells, leading to the formation of bimetallic Pt-Pd nanoparticles with a cage-bell structure, defined as a movable Pt core enclosed by a porous Pd shell, which show enhanced catalytic activity for oxygen reduction compared with that of the Pt seeds due to the additional catalysis from Pd shell. In addition, owing to the different diffusion behavior of methanol and oxygen molecules in the porous Pd shell, the Pt-Pd cage-bell nanostructures also exhibit superior methanol tolerant property in catalyzing the oxygen reduction.

  9. Heterostructured Au/Pd-M (M = Au, Pd, Pt) nanoparticles with compartmentalized composition, morphology, and electrocatalytic activity

    Science.gov (United States)

    Lutz, Patrick S.; Bae, In-Tae; Maye, Mathew M.

    2015-09-01

    The synthesis, processing, and galvanic exchange of three heterostructured nanoparticle systems is described. The surface accessibility and redox potential of a Au/Pd-Ag dumbbell nanoparticle, where a Au/Pd core/shell region, and a silver region make up the domains, was used to prepare the new nanostructures with controlled composition, morphology, and microstructure. Results indicate that the silver domain was particularly susceptible to galvanic displacement, and was exchanged to Au/Pd-M (M = Au, Pd, Pt). Interestingly, the dumbbell morphology remained after exchange, and the silver region was transformed to hollow, parachute, or concentric domains respectively. The morphology and microstructure change was visualized via TEM and HRTEM, and the composition changes were probed via STEM-EDS imaging and XPS. The electrocatalytic activity of the Au/Pd-M towards methanol oxidation was studied, with results indicating that the Au/Pd-Pt nanoparticles had high activity attributed to the porous nature of the platinum domains.The synthesis, processing, and galvanic exchange of three heterostructured nanoparticle systems is described. The surface accessibility and redox potential of a Au/Pd-Ag dumbbell nanoparticle, where a Au/Pd core/shell region, and a silver region make up the domains, was used to prepare the new nanostructures with controlled composition, morphology, and microstructure. Results indicate that the silver domain was particularly susceptible to galvanic displacement, and was exchanged to Au/Pd-M (M = Au, Pd, Pt). Interestingly, the dumbbell morphology remained after exchange, and the silver region was transformed to hollow, parachute, or concentric domains respectively. The morphology and microstructure change was visualized via TEM and HRTEM, and the composition changes were probed via STEM-EDS imaging and XPS. The electrocatalytic activity of the Au/Pd-M towards methanol oxidation was studied, with results indicating that the Au/Pd-Pt nanoparticles had

  10. Effects of Ni vacancy, Ni antisite, Cr and Pt on the third-order elastic constants and mechanical properties of NiAl

    KAUST Repository

    Wu, Shaohua

    2014-12-01

    Effects of Ni vacancy, Ni antisite in Al sublattice, Cr in Al sublattice, Pt in Ni sublattice on the second-order elastic constants (SOECs) and third-order elastic constants (TOECs) of the B2 NiAl have been investigated using the first-principles methods. Lattice constant and the SOECs of NiAl are in good agreement with the previous results. The brittle/ductile transition map based on Pugh ratio G/B and Cauchy pressure Pc shows that Ni antisite, Cr, Pt and pressure can improve the ductility of NiAl, respectively. Ni vacancy and lower pressure can enhance the Vickers hardness Hv of NiAl. The density of states (DOS) and the charge density difference are also used to analysis the effects of vacancy, Ni antisite, Cr and Pt on the mechanical properties of NiAl, and the results are in consistent with the transition map. © 2014 Elsevier Ltd. All rights reserved.

  11. Enhanced Dry Reforming of Methane on Ni and Ni-Pt Catalysts Synthesized by Atomic Layer Deposition

    Energy Technology Data Exchange (ETDEWEB)

    Gould, Troy D.; Montemore, Matthew M.; Lubers, Alia M.; Ellis, Lucas D.; Weimer, Alan; Falconer, John L.; Medlin, James W.

    2015-02-25

    Atomic layer deposition (ALD) was used to deposit Ni and Pt on alumina supports to form monometallic and bimetallic catalysts with initial particle sizes of 1–2.4 nm. The ALD catalysts were more active (per mass of metal) than catalysts prepared by incipient wetness (IW) for dry reforming of methane (DRM), and they did not form carbon whiskers during reaction due to their sufficiently small size. Catalysts modified by Pt ALD had higher rates of reaction per mass of metal and inhibited coking, whereas NiPt catalysts synthesized by IW still formed carbon whiskers. Temperature-programmed reduction of Ni catalysts modified by Pt ALD indicated the presence of bimetallic interaction. Density functional theory calculations suggested that under reaction conditions, the NiPt surfaces form Ni-terminated surfaces that are associated with higher DRM rates (due to their C and O adsorption energies, as well as the CO formation and CH4 dissociation energies).

  12. Preparation and electric and photoelectric properties of thin deposits of Fe, Co, Ni, Cu, Ag, Au and Pd

    International Nuclear Information System (INIS)

    Heras, J.M.; Albano, E.V.; Asensio, M.C.; Viscido, L.

    1984-01-01

    The physics chemical properties of desordered metallic thin films of Fe, Co, Ni, Pd, Ag, Cu and Au are of great interest for its catalitic activity and for its application in radiation absorption of solar cells and micro electronic devices. This work has the purpose of reporting the experimental results obtained by evaporated films of these metals, which present desordered characteristics, small crystal size and high surface-volume rate. (A.C.A.S.) [pt

  13. Processing of Ni30Pt20Ti50 High-Temperature Shape-Memory Alloy Into Thin Rod Demonstrated

    Science.gov (United States)

    Noebe, Ronald D.; Draper, Susan L.; Biles, Tiffany A.; Leonhardt, Todd

    2005-01-01

    High-temperature shape-memory alloys (HTSMAs) based on nickel-titanium (NiTi) with significant ternary additions of palladium (Pd), platinum (Pt), gold (Au), or hafnium (Hf) have been identified as potential high-temperature actuator materials for use up to 500 C. These materials provide an enabling technology for the development of "smart structures" used to control the noise, emissions, or efficiency of gas turbine engines. The demand for these high-temperature versions of conventional shape-memory alloys also has been growing in the automotive, process control, and energy industries. However these materials, including the NiPtTi alloys being developed at the NASA Glenn Research Center, will never find widespread acceptance unless they can be readily processed into useable forms.

  14. Verifying predictions of the L13 crystal structure in Cd-Pt and Pd-Pt by exhaustive enumeration

    Science.gov (United States)

    Hart, Gus L. W.

    2009-07-01

    In 2001, S. Müller and A. Zunger [Phys. Rev. Lett. 87, 165502 (2001)] predicted a never-before-observed crystal structure in Ag-Pd. Recently, Curtarolo predicted the same structure to be stable in Pt-Cd and Pt-Pd [S. Curtarolo , CALPHAD: Comput. Coupling Phase Diagrams Thermochem. 29, 163 (2005)]. The predicted structure is unique in several ways. Though never seen in any other face-centered-cubic-based intermetallic binary compound or ordered alloy, it is relatively simple—it contains only four atoms per unit cell. Furthermore, the structure is the only one of this small size, except the L12 structure, that cannot be characterized as a simple stacking of layers where each layer contains only one kind of atom. We construct a first-principles-based Hamiltonian and search it for the thermodynamically stable (lowest energy) structures. Using a (practically) exhaustive enumeration of about three million of the most likely candidate structures, we find that this new structure, designated L13 , is indeed a ground state in both Cd-Pt and Pd-Pt. Experimental efforts to validate the predictions are underway.

  15. One-step synthesis of PtPdAu ternary alloy nanoparticles on graphene with superior methanol electrooxidation activity

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Yuzhen; Gu Yonge; Lin Shaoxiong; Wei Jinping; Wang Zaihua [Department of Chemistry, Lanzhou University, Lanzhou 730000 (China); Wang Chunming, E-mail: wangcm@lzu.edu.cn [Department of Chemistry, Lanzhou University, Lanzhou 730000 (China); Du Yongling; Ye Weichun [Department of Chemistry, Lanzhou University, Lanzhou 730000 (China)

    2011-10-01

    Highlights: > PtPdAu nanoparticles were synthesized on graphene sheets via chemical reduction method. > The prepared PtPdAu nanoparticles were ternary alloy with fcc structure. > The catalyst exhibited superior catalytic activity and stability for MOR in alkaline. - Abstract: Well-dispersed PtPdAu ternary alloy nanoparticles were synthesized on graphene sheets via a simple one-step chemical reduction method in ethylene glycol (EG) and water system, in which EG served as both reductive and dispersing agent. The electrocatalytic activity of PtPdAu/G was tested by methanol oxidation reaction (MOR). The catalyst was further characterized by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD), which indicated that the as-synthesized PtPdAu nanoparticles with alloy structures were successfully dispersed on the graphene sheets. Electrocatalytic properties of the catalyst for MOR in alkaline have been investigated by cyclic voltammetry (CV), chronoamperometry and Tafel curves. The electrocatalytic activity and stability of PtPdAu/G were superior to PtPd/G, PtAu/G and Pt/G. In addition, the anodic peak current on PtPdAu/G catalyst was proportional to the concentration of methanol in the range of 0.05-1.00 M. This study implies that the prepared catalyst have great potential applications in fuel cells.

  16. Surface, segregation profile for Ni50Pd50(100)

    DEFF Research Database (Denmark)

    Christensen, Asbjørn; Ruban, Andrei; Skriver, Hans Lomholt

    1997-01-01

    A recent dynamical LEED study [G.N. Derry, C.B. McVey, P.J. Rous, Surf. Sci. 326 (1995) 59] reported an oscillatory surface segregation profile in the Ni50Pd50(100) system with the surface layer enriched by Pd. We have performed ab-initio total-energy calculations for the surface of this alloy...... system using the coherent potential approximation and obtain an oscillatory segregation profile, in agreement with experiments. We discuss the energetic origin of the oscillatory segregation profile in terms of effective cluster interactions. We include relaxation effects by means of the semi...

  17. Enhanced bifunctional fuel cell catalysis via Pd/PtCu core/shell nanoplates.

    Science.gov (United States)

    Lin, Fei; Wang, Kai; Tang, Yonghua; Lai, Jianping; Lou, Mingchuan; Huang, Minghua; Guo, Shaojun

    2018-02-01

    Depositing Pt atoms on nanoscale two-dimensional (2D) substrates resulting in the exposure of specific crystal facets is an effective strategy for reducing the Pt content without compromising the catalytic property. Herein, the Pd/PtCu core/shell nanoplates exhibit substantially improved ORR and MOR mass activities, 8.3 and 3.3 times higher than those of commercial Pt. The present work highlights the important role of designing a 2D core/shell nanostructure in enhancing fuel cell electrocatalysis.

  18. Synthesis and hydrogenation application of Pt-Pd bimetallic nanocatalysts stabilized by macrocycle-modified dendrimer

    Science.gov (United States)

    Jin, Zhijun; Xiao, Haiyan; Zhou, Wei; Zhang, Dongqiao; Peng, Xiaohong

    2017-12-01

    Different generations of poly(propylene imine) (Gn-PPI) terminated with N-containing 15-membered triolefinic macrocycle (GnM) (n = 2, 3, 4, 5) were prepared. The bimetallic nanoparticle catalysts GnM-(Ptx/Pd10-x) (x = 0, 3, 5, 7, 10) were prepared by the synchronous ligand-exchange reaction between GnM and the complexes of Pt(PPh3)4 and Pd(PPh3)4. The structure and catalytic properties of GnM-(Ptx/Pd10-x) were characterized via Fourier transform infrared spectroscopy, 1H nuclear magnetic resonance spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, energy-dispersive spectroscopy and inductively coupled plasma atomic emission spectroscopy. The novel bimetallic Pd-Pt nanoparticle catalysts stabilized by dendrimers (DSNs) present higher catalytic activities for the hydrogenation of dimeric acid (DA) than that of nitrile butadiene rubber (NBR). It can be concluded that bimetallic Pd-Pt DSNs possess alloying and synergistic electronic effects on account of the hydrogenation degree (HD) of DA and NBR. Furthermore, the HD of DA and NBR shows a remarkable decrease with the incremental generations (n) of GnM-(Pt3/Pd7) (n = 2, 3, 4, 5).

  19. First principles investigation of the activity of thin film Pt, Pd and Au surface alloys for oxygen reduction

    DEFF Research Database (Denmark)

    Tripkovic, Vladimir; Hansen, Heine Anton; Rossmeisl, Jan

    2015-01-01

    active binary thin films are near-surface alloys of Pt with subsurface Pd and certain PdAu and PtAu thin films with surface and/or subsurface Au. The most active ternary thin films are with pure metal Pt or Pd skins with some degree of Au in the surface and/or subsurface layer and the near-surface alloys...... driving force for surface segregation, diffusion to defects or surface self-assembling. On the basis of stability and activity analysis we conclude that the near surface alloy of Pd in Pt and some PdAu binary and PtPdAu ternary thin films with a controlled amount of Au are the best catalysts for oxygen...

  20. Hydroconversion of n-hexane using Pt/H-MOR and Pt/H-BEA catalysts with various Pt contents and bimetallic PtPd/H-MOR, PtPd/H-BEA, PtIr/H-MOR and PtIr/H-BEA catalysts with various secondary metal contents

    Energy Technology Data Exchange (ETDEWEB)

    Aboul-Gheit, A.K.; Abdel-Hamid, S.M.; Awadallah, A.E. [Process Development Div., Egyptian Petroleum Research Inst., Nasr City, Cairo (Egypt)

    2004-03-01

    Monometallic catalysts containing 0.35 up to 0.50 wt%Pt on H-MOR or H-BEA zeolites, as well as bimetallic catalysts containing Pd or Ir of 0.05 up to 0.20-0.25 wt% combined with a fixed Pt content of 0.35 wt% also supported on H-MOR or H-BEA were prepared and tested for n-hexane hydroconversion in a hydrogen flow using pulsed reactor system. The reaction products were gas chromatographically analysed and the catalysts were characterised for acid sites strength distribution via ammonia temperature programmed desorption (TPD) and for metal(s) dispersion in the support via pulsed hydrogen chemisorption. Increased Pt content in either zeolites decreased its dispersion. The addition of Pd to Pt increased the metals dispersion in both zeolites up to a certain content, whereas Ir addition, principally, decreased dispersion. Maximum isohexanes production behaved parallel to the metals dispersion in the PtPd containing catalysts (structure sensitive). Hydrocracking was more active on the H-MOR supported catalysts, compared to those supported on H-BEA due to higher acid sites number and strength in the former zeolite. Benzene production via dehydrocyclisation of n-hexane was relatively more active on the H-BEA containing catalysts than on those containing H-MOR, due to the less effective diffusion resistance in the BEA channels. (orig.)

  1. Magnetic properties of thermally reduced graphene oxide decorated with PtNi nanoparticles

    International Nuclear Information System (INIS)

    Huízar-Félix, A.M.; Cruz-Silva, R.; Barandiarán, J.M.; García-Gutiérrez, D.I.; Orue, I.

    2016-01-01

    Nanocomposites of reduced graphene oxide (RGO) with PtNi nanoparticles were obtained by in situ thermal reduction of a physical mixture of GO and metallic precursors. RGO and PtNiRGO nanocomposites were studied by differential thermal analysis and thermogravimetry, Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The method presented here is a one-step thermal reduction procedure that allows the deposition of bimetallic PtNi nanoparticles with tetragonal crystalline structure and particle size ranging from 3 nm to 30 nm on RGO. The magnetic properties of the RGO and PtNiRGO nanocomposites were measured by vibrating sample magnetometry, which revealed that the RGO exhibited diamagnetism at room temperature and paramagnetism at temperatures below 10 K. PtNiRGO nanocomposites show hysteresis and ferromagnetic ordering at room temperature with a Curie temperature of 658 K. In addition, its magnetic properties at low temperature were strongly influenced by the paramagnetic contribution of RGO and the morphology of the bimetallic nanoparticles. - Highlights: • Simultaneous synthesis method for growth of PtNi nanoparticles on RGO. • Microstructural features of PtNiRGO nanocomposite were studied with extensive characterization. • Diamagnetic behavior of RGO and ferromagnetic ordering for PtNiRGO nanocomposite.

  2. Seed-mediated synthesis of cross-linked Pt-NiO nanochains for methanol oxidation

    Science.gov (United States)

    Gu, Zhulan; Bin, Duan; Feng, Yue; Zhang, Ke; Wang, Jin; Yan, Bo; Li, Shumin; Xiong, Zhiping; Wang, Caiqin; Shiraishi, Yukihide; Du, Yukou

    2017-07-01

    A simple method was reported for employing NiO nanoparticles act as seeds and then different amounts of Pt2+ were reduced on the NiO nanoparticles, forming a cross-linked Pt-NiO nanocatalysts. These as-prepared catalysts were characterized using different physical-chemical techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The results indicate that the morphology of the cross-linked Pt-NiO nanochain was successfully produced regardless of the molar ratio of Pt2+ to NiO precursors. The electrochemical characteristics of Pt-NiO nanochain catalysts were evaluated for the oxidation of methanol as a model reaction, which verify that the Pt-NiO catalysts show enhanced activity and high stability in comparison with the commercial Pt/C catalyst. The optimized ratio of Pt to NiO is 1:1, then tuned by simple adjusting the feed ratio of the precursors as well. The synthesized nanocatalysts will be found the great potential applications as electrocatalysts for fuel cells owe to their enhanced catalytic performance and long-term stability.

  3. Magnetic properties of thermally reduced graphene oxide decorated with PtNi nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Huízar-Félix, A.M. [Universidad Autónoma de Nuevo León, UANL, Facultad de Ingeniería Mecánica y Eléctrica, FIME, Ave. Pedro de Alba s/n, Ciudad Universitaria, C.P.66455 San Nicolás de los Garza, N.L. (Mexico); Departamento de Electricidad y Electrónica, Universidad del País Vasco (UPV/EHU), 48940 Leioa (Spain); BC Materials, Basque Centre for Materials, Applications and Nanostructures, 48160 Derio (Spain); Cruz-Silva, R. [Research Center for Exotic NanoCarbon, Shinshu University, 4-17-1 Wakasato, Nagano 380-8553 (Japan); Barandiarán, J.M. [Departamento de Electricidad y Electrónica, Universidad del País Vasco (UPV/EHU), 48940 Leioa (Spain); BC Materials, Basque Centre for Materials, Applications and Nanostructures, 48160 Derio (Spain); García-Gutiérrez, D.I. [Universidad Autónoma de Nuevo León, UANL, Facultad de Ingeniería Mecánica y Eléctrica, FIME, Ave. Pedro de Alba s/n, Ciudad Universitaria, C.P.66455 San Nicolás de los Garza, N.L. (Mexico); Orue, I. [SGIKER Medidas Magnéticas, Facultad de Ciencia y Tecnología, Universidad del País Vasco (UPV/EHU), 48940 Leioa (Spain); and others

    2016-09-05

    Nanocomposites of reduced graphene oxide (RGO) with PtNi nanoparticles were obtained by in situ thermal reduction of a physical mixture of GO and metallic precursors. RGO and PtNiRGO nanocomposites were studied by differential thermal analysis and thermogravimetry, Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), as well as scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The method presented here is a one-step thermal reduction procedure that allows the deposition of bimetallic PtNi nanoparticles with tetragonal crystalline structure and particle size ranging from 3 nm to 30 nm on RGO. The magnetic properties of the RGO and PtNiRGO nanocomposites were measured by vibrating sample magnetometry, which revealed that the RGO exhibited diamagnetism at room temperature and paramagnetism at temperatures below 10 K. PtNiRGO nanocomposites show hysteresis and ferromagnetic ordering at room temperature with a Curie temperature of 658 K. In addition, its magnetic properties at low temperature were strongly influenced by the paramagnetic contribution of RGO and the morphology of the bimetallic nanoparticles. - Highlights: • Simultaneous synthesis method for growth of PtNi nanoparticles on RGO. • Microstructural features of PtNiRGO nanocomposite were studied with extensive characterization. • Diamagnetic behavior of RGO and ferromagnetic ordering for PtNiRGO nanocomposite.

  4. Probing the Intrinsic Electronic Structure of the Bis(dithiolene) Anions [M(mnt)2]2- and [M(mnt)2]1- (M=Ni, Pd, Pt; mnt=1,2-S2C2(CN)2) in the Gas Phase By Photoelectron Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Waters, Tom; Woo, Hin-koon; Wang, Xue B.; Wang, Lai S.

    2006-03-11

    A detailed understanding of the electronic structure of transition metal bis(dithiolene) complexes is important because of their interesting redox, magnetic, optical, and conducting properties and their relevance to enzymes containing molybdenum and tungsten bis(dithiolene) centers. The electronic structures of the bis(dithiolene) anions [M(mnt)2] n- (M ) Ni, Pd, Pt; mnt ) 1,2-S2C2(CN)2; n) 0-2) were examined by a combination of photodetachment photoelectron spectroscopy (PES) and density functional theory calculations. The combined experimental and theoretical data provide insight into the molecular orbital energy levels of [M(mnt)2]2- and the ground and excited states of [M(mnt)2]1- and [M(mnt)2]. Detachment features from ligand-based orbitals of [M(mnt)2]2- occur at similar energies for each species, independent of the metal center, while those arising from metal-based orbitals occur at higher energies for the heavier congeners. Electronic excitation energies inferred for [M(mnt)2]1- from the PES experiments agree well with those obtained in optical absorption experiments in solution, with the PES experiments providing additional insight into the changes in energy of these transitions as a function of metal. The singly charged anions [M(mnt)2]1- were also prepared and studied independently. Electron detachment from the ground states of these doublet anions accessed the lowest singlet and triplet states of neutral [M(mnt)2], thereby providing a direct experimental measure of their singlet-triplet splitting.

  5. Methods to synthesize NiPt bimetallic nanoparticles by a reversed-phase microemulsion, deposition of NiPt bimetallic nanoparticles on a support, and application of the supported catalyst for CO.sub.2 reforming of methane

    KAUST Repository

    Biausque, Gregory

    2015-04-28

    Methods to synthesize NiPt bimetallic nanoparticles by a reversed-phase microemulsion, deposition of NiPt bimetallic nanoparticles on a support, and application of the supported catalyst for CO.sub.2 reforming of methane

  6. High-voltage electron diffraction study of structure factors of Pd and Pt

    International Nuclear Information System (INIS)

    Matsumura, S.; Ohboshi, T.; Oki, K.; Tomokiyo, Y.

    1991-01-01

    In order to determine the atomic scattering factors of Pd and Pt for g=200 and 220 reflections as well as their temperature factors, we measured critical voltages under systematic excitation and the splitting of Kikuchi lines of high-order reflections. A simulation of the many-beam dynmaical diffraction showed that the absorption of electrons in Pd and Pt is so significant as to narrow the splitting of Kikuchi lines by 1.1% and 5.5%, respectively. The analysis of the experimental results taking into account the absorption effect, determined the atomic scattering factors for both elements and the B-factor of Pd with quite good accuracies. In contrast, the B-factor of Pt involves relatively large uncertainty, owing to diffuse Kikuchi lines. (orig.)

  7. Preparation and characterization of MgB2 with Pd, Pt and Re doping

    DEFF Research Database (Denmark)

    Grivel, Jean-Claude; Pitillas, A.; Namazkar, Shahla

    2016-01-01

    Samples with Mg1-xDxB2.04 (D = Pt, Pd or Re) nominal compositions have been synthesised by a solid-state route. None of these doping elements can be substituted for Mg in a detectable amount and their presence in the samples has no influence on the critical temperature and on the lattice parameters...... of the MgB2 superconductor. Impurity phases are formed by reaction mostly with Mg. The microstructure of the Pt, Pd and Re-based phases depends on the elements. Re-rich particles with large sizes up to 8 μm form, whereas Pt- and Pd-containing impurities are finely dispersed with a particle size that does...

  8. Use of Pd-Pt loaded graphene aerogel on nickel foam in direct ethanol fuel cell

    Science.gov (United States)

    Tsang, Chi Him A.; Leung, D. Y. C.

    2018-01-01

    A size customized binder-free bimetallic Pd-Pt loaded graphene aerogel deposited on nickel foam plate (Pd-Pt/GA/NFP) was prepared and used as an electrode for an alkaline direct ethanol fuel cell (DEFC) under room temperature. The effect of fuel concentration and metal composition on the output power density of the DEFC was systematically investigated. Under the optimum fuel concentration, the cell could achieve a value of 3.6 mW cm-2 at room temperature for the graphene electrode with Pd/Pt ratio approaching 1:1. Such results demonstrated the possibility of producing a size customized metal loaded GA/NFP electrode for fuel cell with high performance.

  9. Molecular dynamics simulations of Pd-Ni transition metal alloys

    International Nuclear Information System (INIS)

    Kart, S. O.; Kart, H. H.; Uludogan, M.; Tomak, M.; Cagin, T.

    2002-01-01

    Molecular Dynamics simulations are performed to study bulk properties of fcc metals and metal alloys by using the quantum Sutton-Chen many-body potentials within the context of the tight-binding approach. The Molecular Dynamics algorithms we used in the simulations of Pd-Ni alloys are based on an extended Hamiltonian formalism arising from the works of Andersen (1980), Parinello and Rahman (1980), Nose (1984), Hoover (1985) and Cagin (1988). In these simulations, the effect of temperature and concentration on the solid and liquid properties are studied. Elastic constants and phonon dispersion relation are the solid properties we simulated in this work. Dynamic and static properties of liquid Pd-Ni are also computed by examining the behavior of density, enthalpy, pair distribution function and structure factor. The melting temperatures of Pd-Ni alloys are investigated. The diffusion coefficients are calculated from the mean square displacement using Einstein relation and from velocity auto-correlation function using Green-Kubo relations. The simulation results are in good agreement with the experiments

  10. Pt Monolayer Electrocatalyst for Oxygen Reduction Reaction on Pd-Cu Alloy: First-Principles Investigation

    Directory of Open Access Journals (Sweden)

    Amra Peles

    2015-07-01

    Full Text Available First principles approach is used to examine geometric and electronic structure of the catalyst concept aimed to improve activity and utilization of precious Pt metal for oxygen reduction reaction in fuel cells. The Pt monolayers on Pd skin and Pd1-xCux inner core for various compositions x were examined by building the appropriate models starting from Pd-Cu solid solution. We provided a detailed description of changes in the descriptors of catalytic behavior, d-band energy and binding energies of reaction intermediates, giving an insight into the underlying mechanism of catalytic activity enhancement based on the first principles density functional theory (DFT calculations. Structural properties of the Pd-Cu bimetallic were determined for bulk and surfaces, including the segregation profile of Cu under different environment on the surface.

  11. Electronic Structure of the fcc Transition Metals Ir, Rh, Pt, and Pd

    DEFF Research Database (Denmark)

    Andersen, O. Krogh

    1970-01-01

    /atom)/Ry, respectively. Spin-orbit coupling is important for all four metals and the coupling parameter varies by 30% over the d bandwidth. Detailed comparisons with de Haas—van Alphen Fermi-surface dimensions have previously been presented and the agreement was very good. Comparison with measured electronic specific......We give a complete description of a relativistic augmented-plane-wave calculation of the band structures of the paramagnetic fcc transition metals Ir, Rh, Pt, and Pd. The width and position of the d band decrease in the sequence Ir, Pt, Rh, Pd; and N(EF)=13.8,23.2,18.7, and 32.7 (states...

  12. Monte Carlo Simulations of Segregation in Pt-Ni Catalyst Nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Guofeng; Van Hove, Michel A.; Ross, Philip N.; Baskes, M.I.

    2004-04-01

    We have investigated the segregation of Pt atoms in the surfaces of Pt-Ni nanoparticles, using Modified Embedded Atom Model potentials and the Monte Carlo method. The nanoparticles are assumed to have disordered fcc configurations at two fixed overall concentrations (50 at. percent Pt and 75 at. percent Pt). We use four kinds of nanoparticle shapes [cube, tetrahedron, octahedron, and cubo-octahedron] terminated by {l_brace}111{r_brace} and {l_brace}100{r_brace} facets to examine the extent of the Pt segregation to the nanoparticle surfaces and determine the equilibrium structures of Pt-Ni nanoparticles at T=600 K. The model particles contain between 560 and 4631 atoms (particle size ranging from 2.5 to 5 nm). Our results imply that a complete (100)-facet reconstruction could make the cubo-octahendral Pt-Ni nanoparticles most energetically favorable, consistent with experimental observations. We predict that at 600 K due to segregation the equilibrium Pt50Ni50 nanoparticles with fewer than 2000 atoms and Pt75Ni25 nano particles with fewer than 4000 atoms would achieve a surface-sandwich structure, in which the Pt atoms are enriched in the outermost and third atomic shells while the Ni atoms are enriched in the second atomic shell. We also find that due to an order-disorder transition the Pt50Ni50 cubo-octahedral nanoparticles containing more than 2000 atoms would form a core-shell structure with a Pt-enriched surface and a Pt-deficient homogeneous core.

  13. The use of graphite oxide to produce mesoporous carbon supporting Pt, Ru, or Pd nanoparticles

    OpenAIRE

    Gotoh, Kazuma; Kawabata, Koji; Fujii, Eiji; Morishige, Kunimitsu; Kinumoto, Taro; Miyazaki, Yuki; Ishida, Hiroyuki

    2009-01-01

    Mesoporous carbon having platinum, ruthenium or palladium nanoparticles on exfoliated graphene sheets were produced from graphite oxide (GO) and metal complexes. The Pt included carbon was made by heating of the intercalation compound including tetraammineplatinum (II) chloride monohydrate. Samples having Ru or Pd are producible by heating in nitrogen gas atmosphere using hexaammineruthenium (III) chloride or tetraamminepalladium (II) chloride monohydrate instead of Pt complex. The particle s...

  14. Study of PtNi/C catalyst for direct ethanol fuel cell; Estudo do catalisador PtNi/C para celula a combustivel de etanol direto

    Energy Technology Data Exchange (ETDEWEB)

    Moraes, L.P.R. de; Silva, E.L. da; Amico, S.C.; Malfatti, C.F., E-mail: eticiaprm@gmail.com [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil)

    2014-07-01

    In this work, PtNi binary catalyst and pure platin catalyst were synthesized by the impregnation-reduction method, using Vulcan XC72R as support, for direct ethanol fuel cells. The composition and structure of the catalysts were analyzed by X-ray diffraction, the electrochemical behavior was evaluated by cyclic voltammetry and morphology of the catalysts was studied by high-resolution transmission electron microscopy. The results showed that the addition of Ni to Pt led to the contraction of the crystal lattice, increased the catalytic activity compared to pure Pt and initiated the electrooxidation of ethanol at lower potential. (author)

  15. A comparative study of the adsorption and hydrogenation of acrolein on Pt(1 1 1), Ni(1 1 1) film and Pt Ni Pt(1 1 1) bimetallic surfaces

    Science.gov (United States)

    Murillo, Luis E.; Chen, Jingguang G.

    In this study we have investigated the reaction pathways for the decomposition and hydrogenation of acrolein (CH 2dbnd CH-CH dbnd O) on Ni/Pt(1 1 1) surfaces under ultra-high vacuum (UHV) conditions using temperature programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). While gas-phase hydrogenation products are not observed from clean Pt(1 1 1), the subsurface Pt-Ni-Pt(1 1 1), with Ni residing below the first layer of Pt, is active for the self-hydrogenation of the C dbnd O bond to produce unsaturated alcohol (2-propenol) and the C dbnd C bond to produce saturated aldehyde (propanal), with the latter being the main hydrogenation product without the consecutive hydrogenation to saturated alcohol. For a thick Ni(1 1 1) film prepared on Pt(1 1 1), the self-hydrogenation yields for both products are lower than that from the Pt-Ni-Pt(1 1 1) surface. The presence of pre-adsorbed hydrogen further enhances the selectivity toward C dbnd O bond hydrogenation on the Pt-Ni-Pt(1 1 1) surface. In addition, HREELS studies of the adsorption of the two hydrogenation products, 2-propenol and propanal, are performed on the Pt-Ni-Pt(1 1 1) surface to identify the possible surface intermediates during the reaction of acrolein. The results presented here indicate that the hydrogenation activity and selectivity of acrolein on Pt(1 1 1) can be significantly modified by the formation of the bimetallic surfaces.

  16. Pd@Pt Core–Shell Nanoparticles with Branched Dandelion-like Morphology as Highly Efficient Catalysts for Olefin Reduction

    Science.gov (United States)

    A facile synthesis based on the addition of ascorbic acid to a mixture of Na2PdCl4, K2PtCl6, and Pluronic P123 results in highly branched core–shell nanoparticles (NPs) with a micro–mesoporous dandelion-like morphology comprising Pd core and Pt shell. The slow reduction kinetics ...

  17. PtPb/PtNi Intermetallic Core/Atomic Layer Shell Octahedra for Efficient Oxygen Reduction Electrocatalysis.

    Science.gov (United States)

    Bu, Lingzheng; Shao, Qi; E, Bin; Guo, Jun; Yao, Jianlin; Huang, Xiaoqing

    2017-07-19

    Although explosive studies on pursuing high-performance Pt-based nanomaterials for fuel cell reactions have been carried out, the combined controls of surface composition, exposed facet, and interior structure of the catalyst remains a formidable challenge. We demonstrate herein a facile chemical approach to realize a new class of intermetallic Pt-Pb-Ni octahedra for the first time. Those nanostructures with unique intermetallic core, active surface composition, and the exposed facet enhance oxygen reduction electrocatalysis with the optimized PtPb 1.12 Ni 0.14 octahedra exhibiting superior specific and mass activities (5.16 mA/cm 2 and 1.92 A/mg Pt ) for oxygen reduction reaction (ORR) that are ∼20 and ∼11 times higher than the commercial Pt/C, respectively. Moreover, the PtPb 1.12 Ni 0.14 octahedra can endure at least 15 000 cycles with negligible activity decay, showing a new class of Pt-based electrocatalysts with enhanced performance for fuel cells and beyond.

  18. Methanol oxidation reaction activity of microwave irradiated and heat-treated Pt/Co and Pt/Ni nano-electrocatalysts

    CSIR Research Space (South Africa)

    Mathe, NR

    2014-11-01

    Full Text Available Bimetallic Pt nanoparticles were prepared by alloying Pt with the non-noble transition metals, Co and Ni, using a conventional heat-treatment (HT) method and microwaveirradiation (MW). The resulting samples were PteCo-Ht, PteNi-HT, PteCo, MW and Pt...

  19. Graphitized nanodiamond supporting PtNi alloy as stable anodic and cathodic electrocatalysts for direct methanol fuel cell

    International Nuclear Information System (INIS)

    Wang, Yongjiao; Zang, Jianbing; Dong, Liang; Pan, Hong; Yuan, Yungang; Wang, Yanhui

    2013-01-01

    Highlights: • The graphitized nanodiamond (GND) showed a higher oxidation-resistance than XC-72. • The PtNi/GND electrocatalytic exhibited greater stability than PtNi/XC-72. • The PtNi/GND had a better catalytic activity for MOR and ORR than Pt/GND. -- Abstract: Surface graphitized nanodiamond (GND) with a diamond core covered by a graphitic carbon shell was prepared by annealing ND at the temperature of 1300 °C in a vacuum of 10 −3 Pa. PtNi electrocatalysts were prepared by a microwave heating polyol method using the prepared GND as a support. The composition and morphology of the PtNi electrocatalysts supported on GND (PtNi/GND) were characterized by X-ray diffraction, transmission electron microscopy and energy dispersion spectra. The results showed that nano-scaled PtNi alloy particles with an atomic ratio of approximately 1:1 were uniformly deposited on the GND through co-reduction process. The electrocatalytic activities of the PtNi/GND electrocatalysts for methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR) were investigated by cyclic voltammetry, chronoamperometry and linear sweep voltammetry. The PtNi/GND exhibited better electrocatalytic activities than the Pt/GND either for MOR and ORR. In comparison with traditional carbon support Vulcan XC-72, GND showed higher oxidation-resistance, and consequently led to greater stability for the PtNi/GND than PtNi/XC-72

  20. Pt-Os isotopic constraints on the age of hydrothermal overprinting on the Jinchuan Ni-Cu-PGE deposit, China

    Science.gov (United States)

    Yang, Shenghong; Yang, Gang; Qu, Wenjun; Du, Andao; Hanski, Eero; Lahaye, Yann; Chen, Jiangfeng

    2017-12-01

    Platinum group element (PGE) mineralization occurs associated with mafic-ultramafic rocks in different environments. Although the PGE enrichment is primarily caused by magmatic processes, remobilization of Pd and Pt by hydrothermal fluids has likely been an important mechanism in increasing the precious metal grade in many cases. However, the timing of PGE enrichment by hydrothermal fluid processes is commonly difficult to constrain. The Jinchuan ultramafic intrusion in Northwest China is ranked the world's third largest magmatic Ni-Cu sulfide deposit. Besides the main ore body consisting of net-textured and disseminated sulfides, there is hydrothermal mineralization associated with sheared contact zones of the intrusion, which shows elevated Cu and Pt concentrations. The unusually high Pt is hosted mainly in sperrylite within altered silicates. In this study, we applied the Pt-Os geochronometer to a Cu-Pt-rich ore body, yielding an isochron age of 436 ± 23 Ma. This age is significantly younger than the main ore formation age of ca. 825 Ma, but similar to that of the continental collision event between the Qaidam-Qilian Block and Alax Block of North China. This indicates that the intrusion may have been uplifted during the Paleozoic orogenic processes from deeper crust, resulting in the generation of the Cu-Pt-rich hydrothermal ore body. Our new data provide the first strong age constraints on the hydrothermal PGE enrichment, showing that the Pt-Os isotope system is potentially a powerful tool for dating hydrothermal overprinting on Ni-Cu-PGE sulfide deposits.

  1. Synthesis of Pt-Ni/graphene via in situ reduction and its enhanced catalyst activity for methanol oxidation.

    Science.gov (United States)

    Li, Lihong; Wu, Yuen; Lu, Jun; Nan, Caiyun; Li, Yadong

    2013-09-04

    A simple in situ reduction approach was used to obtain Pt3Ni/reduced graphene oxide (rGO) with dominant {111} facets. The catalytic activity of Pt-Ni/rGO toward methanol electro-oxidation was studied by performing cyclic voltammetry. The Pt3Ni/rGO nanocatalysts exhibited improved catalytic activity and durability.

  2. Electrochemical characterization of Pt-Ru-Pd catalysts for methanol oxidation reaction in direct methanol fuel cells.

    Science.gov (United States)

    Choi, M; Han, C; Kim, I T; An, J C; Lee, J J; Lee, H K; Shim, J

    2011-01-01

    PtRuPd nanoparticles on carbon black were prepared and characterized as electrocatalysts for methanol oxidation reaction in direct methanol fuel cells. Nano-sized Pd (2-4 nm) particles were deposited on Pt/C and PtRu/C (commercial products) by a simple chemical reduction process. The structural and physical information of the PtRuPd/C were confirmed by TEM and XRD, and their electrocatalytic activities were measured by cyclic voltammetry and linear sweep voltammetry. The catalysts containing Pd showed higher electrocatalytic activity for methanol oxidation reaction than the other catalysts. This might be attributed to an increase in the electrochemical surface area of Pt, which is caused by the addition of Pd; this results in increased catalyst utilization.

  3. Molecular Dynamics Simulation of Solidification of Pd-Ni Clusters with Different Nickel Content

    Directory of Open Access Journals (Sweden)

    Chen Gang

    2014-01-01

    Full Text Available Molecular dynamics simulation has been performed for investigating the glass transition of Pd-Ni alloy nanoparticles in the solidification process. The results showed that the Pd-Ni nanoparticles with composition far from pure metal should form amorphous structure more easily, which is in accordance with the results of the thermodynamic calculation. There are some regular and distorted fivefold symmetry in the amorphous Pd-Ni alloy nanoparticles. The nanoclusters with bigger difference value between formation enthalpies of solutions and glasses will transform to glass more easily than the other Pd-Ni alloy nanoclusters.

  4. Cage-bell Pt-Pd nanostructures with enhanced catalytic properties and superior methanol tolerance for oxygen reduction reaction

    OpenAIRE

    Dong Chen; Feng Ye; Hui Liu; Jun Yang

    2016-01-01

    Precisely tailoring the structure and fully making use of the components of nanoparticles are effective to enhance their catalytic performance for a given reaction. We herein demonstrate the design of cage-bell structured Pt-Pd nanoparticles, where a Pd shell is deliberately selected to enhance the catalytic property and methanol tolerance of Pt for oxygen reduction reaction. This strategy starts with the synthesis of core-shell Pt@Ag nanoparticles, followed by galvanic replacement reaction b...

  5. The Pt-enriched PtNi alloy surface and its excellent catalytic performance in hydrolytic hydrogenation of cellulose.

    Science.gov (United States)

    Liang, Guanfeng; He, Limin; Arai, Masahiko; Zhao, Fengyu

    2014-05-01

    Ni-based catalysts are currently a subject of intense research in the hydrolytic hydrogenation of cellulose. We previously reported that Ni/ZSM-5 catalyst gave high yield of hexitols. However, Ni-based catalysts suffered fast deactivation in hot-compressed water. In this follow-up study we designed highly active Ni-based bimetallic catalysts with excellent hydrothermal stability for the hydrolytic hydrogenation of microcrystalline cellulose. PtNi/ZSM-5 shows a 76.9 % yield of hexitols, which is the best obtained so far in the hydrolytic hydrogenation of microcrystalline cellulose over Ni-based catalysts. Furthermore, the yield of hexitols remained greater than 55 % after the catalyst was reused for 4 times. The results showed that PtNi nanoparticles were formed with a Pt-enriched alloy surface as confirmed by XRD, H2-TPR (temperature-programmed H2 reduction), XPS (X-ray photoelectron spectroscopy), and H2-TPD (temperature-programmed H2 desorption). The surface features of these nano-particles were characterized by CO-TPD (temperature-programmed CO desorption), CO-FTIR (CO adsorption FTIR spectroscopy), HRTEM (high resolution TEM), and O2-TPO (temperature programmed oxidation) and this special surface structure may be responsible for the high activity, selectivity, and stability in the hydrolytic hydrogenation of cellulose in hot-compressed water. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Green synthesis of noble nanometals (Au, Pt, Pd) using glycerol under microwave irradiation conditions

    Science.gov (United States)

    A newer application of glycerol in the field of nanomaterials synthesis has been developed from both the economic and environmental points of view. Glycerol can act as a reducing agent for the fabrication of noble nanometals, such as Au, Pt, and Pd, under microwave irradiation. T...

  7. Green and Facile Synthesis of Pd-Pt Alloy Nanoparticles by Laser Irradiation of Aqueous Solution.

    Science.gov (United States)

    Nakamura, Takahiro; Sato, Shunichi

    2015-01-01

    Solid-solution palladium-platinum (Pd-Pt) alloy nanoparticles (NPs) with fully tunable compositions were directly fabricated through high-intensity laser irradiation of an aqueous solution of palladium and platinum ions without using any reducing agents or thermal processes. Transmission electron microscopy (TEM) observations showed that nanometer-sized particles were fabricated by laser irradiation of mixed aqueous solutions of palladium and platinum ions with different feeding ratios. The crystalline nature of the NPs was precisely characterized by X-ray diffraction (XRD). Despite the fact that, for the bulk systems, a pair of XRD peak was detected between the palladium and platinum peaks because of the large miscibility gap in the Pd-Pt binary phase diagram, only a single XRD peak was seen for the Pd-Pt NPs fabricated in the present study. Moreover, the peak position shifted from that of pure palladium towards platinum with increasing fraction of platinum ions in solution. Consequently, the interplanar spacings of the alloy NPs agreed well with the estimated values obtained from Vegard's law. These observations strongly indicate the formation of solid-solution Pd-Pt alloy NPs with fully tunable compositions. This technique is not only a "green" (environmentally-friendly) and facile process, but is also widely applicable to other binary and ternary systems.

  8. Structural characterization of Pt-Pd core-shell nanoparticles by Cs-corrected STEM

    Energy Technology Data Exchange (ETDEWEB)

    Esparza, R., E-mail: resparza@fata.unam.mx [Universidad Nacional Autonoma de Mexico, Centro de Fisica Aplicada y Tecnologia Avanzada (Mexico); Garcia-Ruiz, Amado F. [UPIICSA-COFAA, Instituto Politecnico Nacional (Mexico); Velazquez Salazar, J. J. [University of Texas at San Antonio, Department of Physics and Astronomy (United States); Perez, R. [Universidad Nacional Autonoma de Mexico, Centro de Fisica Aplicada y Tecnologia Avanzada (Mexico); Jose-Yacaman, M. [The University of Texas at San Antonio, Department of Physics and Astronomy (United States)

    2013-01-15

    Pt-Pd core-shell nanoparticles were synthesized using a modified polyol method. A thermal method under refluxing, carrying on the reaction up to 285 Degree-Sign C, has been performed to reduce metallic salts using ethylene glycol as reducer and poly(N-vinyl-2-pyrrolidone) as protective reagent of the formed bimetallic nanoparticles. According to other works, this type of structure has been studied and utilized to successfully increase the catalytic properties of monometallic nanoparticles Pt or Pd. Core-shell bimetallic nanoparticles were structurally characterized using aberration-corrected scanning transmission electron microscopy (Cs-STEM) equipped with a high-angle annular dark field detector, energy-dispersive X-ray spectrometry (EDS), and electron energy-loss spectroscopy (EELS). The high-resolution elemental line scan and mappings were carried out using a combination of STEM-EDS and STEM-EELS. The obtained results show the growth of the Pd shell on the Pt core with polyhedral morphology. The average size of the bimetallic nanoparticles was 13.5 nm and the average size of the core was 8.5 nm; consequently, the thickness of the shell was around 2.5 nm. The growth of the Pd shell on the Pt core is layer by layer, suggesting a Frank-van der Merwe growth mechanism.

  9. Static magnetic susceptibility of radiopaque NiTiPt and NiTiEr

    Science.gov (United States)

    Chovan, Drahomír; Gandhi, Abbasi; Butler, James; Tofail, Syed A. M.

    2018-04-01

    Magnetic properties of metallic alloys used in biomedical industry are important for the magnetic resonance imaging (MRI). If the alloys were to be used for long term implants or as guiding devices, safety of the patient as well as the medical staff has to be ensured. Strong response to the external magnetic field can cause mechanical damage to the patients body. In this paper we present magnetic susceptibility of nickel rich, ternary NiTiPt and NiTiEr to static magnetic field. We show that the magnetic susceptibility of these radiopaque alloys has values in low paramagnetic region comparable to the binary nickel-titanium. Furthermore, we studied the effect of the thermal and mechanical treatments on magnetic properties. Despite deviation from linear M (H) treated samples spanning small region around H = 0 , the linearity of the M (H) and χ =d M /d H values suggest that these ternary alloys are safe to use under MRI conditions.

  10. Ga-Doped Pt-Ni Octahedral Nanoparticles as a Highly Active and Durable Electrocatalyst for Oxygen Reduction Reaction.

    Science.gov (United States)

    Lim, JeongHoon; Shin, Hyeyoung; Kim, MinJoong; Lee, Hoin; Lee, Kug-Seung; Kwon, YongKeun; Song, DongHoon; Oh, SeKwon; Kim, Hyungjun; Cho, EunAe

    2018-04-11

    Bimetallic PtNi nanoparticles have been considered as a promising electrocatalyst for oxygen reduction reaction (ORR) in polymer electrolyte membrane fuel cells (PEMFCs) owing to their high catalytic activity. However, under typical fuel cell operating conditions, Ni atoms easily dissolve into the electrolyte, resulting in degradation of the catalyst and the membrane-electrode assembly (MEA). Here, we report gallium-doped PtNi octahedral nanoparticles on a carbon support (Ga-PtNi/C). The Ga-PtNi/C shows high ORR activity, marking an 11.7-fold improvement in the mass activity (1.24 A mg Pt -1 ) and a 17.3-fold improvement in the specific activity (2.53 mA cm -2 ) compared to the commercial Pt/C (0.106 A mg Pt -1 and 0.146 mA cm -2 ). Density functional theory calculations demonstrate that addition of Ga to octahedral PtNi can cause an increase in the oxygen intermediate binding energy, leading to the enhanced catalytic activity toward ORR. In a voltage-cycling test, the Ga-PtNi/C exhibits superior stability to PtNi/C and the commercial Pt/C, maintaining the initial Ni concentration and octahedral shape of the nanoparticles. Single cell using the Ga-PtNi/C exhibits higher initial performance and durability than those using the PtNi/C and the commercial Pt/C. The majority of the Ga-PtNi nanoparticles well maintain the octahedral shape without agglomeration after the single cell durability test (30,000 cycles). This work demonstrates that the octahedral Ga-PtNi/C can be utilized as a highly active and durable ORR catalyst in practical fuel cell applications.

  11. Synthesis of PtNi Alloy Nanoparticles on Graphene-Based Polymer Nanohybrids for Electrocatalytic Oxidation of Methanol

    Directory of Open Access Journals (Sweden)

    Tung-Yuan Yung

    2016-12-01

    Full Text Available We have successfully produced bimetallic PtNi alloy nanoparticles on poly(diallyldimethylammonium chloride (PDDA-modified graphene nanosheets (PtNi/PDDA-G by the “one-pot” hydrothermal method. The size of PtNi alloy nanoparticles is approximately 2–5 nm. The PDDA-modified graphene nanosheets (PDDA-G provides an anchored site for metal precursors; hence, the PtNi nanoparticles could be easily bond on the PDDA-G substrate. PtNi alloy nanoparticles (2–5 nm display a homogenous alloy phase embedded on the PDDA-G substrate, evaluated by Raman, X-ray diffractometer (XRD, thermal gravity analysis (TGA, electron surface chemical analysis (ESCA, and electron energy loss spectroscopy (EELS. The Pt/Ni ratio of PtNi alloy nanoparticles is ~1.7, examined by the energy dispersive spectroscopy (EDS spectra of transmitting electron microscopy (EDS/TEM spectra and mapping technique. The methanol electro-oxidation of PtNi/PDDA-G was evaluated by cyclic voltammetry (CV in 0.5 M of H2SO4 and 0.5 M of CH3OH. Compared to Pt on carbon nanoparticles (Pt/C and Pt on Graphene (Pt/G, the PtNi/PDDA-G exhibits the optimal electrochemical surface area (ECSA, methanol oxidation reaction (MOR activity, and durability by chrono amperometry (CA test, which can be a candidate for MOR in the electro-catalysis of direct methanol fuel cells (DMFC.

  12. Effects of Alloyed Metal on the Catalysis Activity of Pt for Ethanol Partial Oxidation: Adsorption and Dehydrogenation on Pt3M (M=Pt, Ru, Sn, Re, Rh, and Pd)

    OpenAIRE

    Xu, Zhen-Feng; Wang, Yixuan

    2011-01-01

    The adsorption and dehydrogenation reactions of ethanol over bimetallic clusters, Pt3M (M = Pt, Ru, Sn, Re, Rh, and Pd), have been extensively investigated with density functional theory. Both the α-hydrogen and hydroxyl adsorptions on Pt as well as on the alloyed transition metal M sites of PtM were considered as initial reaction steps. The adsorptions of ethanol on Pt and M sites of some PtM via the α-hydrogen were well established. Although the α-hydrogen adsorption on Pt site is weaker th...

  13. Evaluation of the behavior of PtPd/MWCNT electrocatalysts as ethylene glycol-tolerant electrodes for oxygen oxidation reaction (ORR); Evaluacion del comportamiento de electrocatalizadores tipo PtPd/MWCNT como electrodos para la reaccion de oxidacion del oxigeno (ORR) tolerantes al etilenglicol

    Energy Technology Data Exchange (ETDEWEB)

    Morales-Acosta, D.; Arriaga, L.G. [Centro de Investigacion y Desarrollo Tecnologico en Electroquimica, Pedro Escobedo, Queretaro (Mexico)]. E-mail: dmorales@cideteq.mx; Alvarez-Contreras, L. [Centro de Investigacion en Materiales Avanzados S. C., Chihuahua, Chihuahua (Mexico); Fraire Luna, S.; Rodriguez Varela, F.J. [Cinvestav, Unidad Saltillo, Ramos Arizpe, Coahuila, (Mexico)

    2009-09-15

    Pt-Pd/MWCNTs (atomic ratio Pt:Pd 43:57) and Pt/MWCNTs electrocatalysts were synthesized and evaluated as cathodes for oxygen reduction reaction (ORR) with the application of direct ethylene glycol fuel cells (DEGFC). A commercial PtC material was also evaluated as a reference. It was found that Pt-Pd/MWCNT has a capability for high tolerance to ethylene glycol (EG) and higher selectivity for ORR compared to a single Pt- cathode. As a result, the change in onset potential of the ORR, Eonset, in Pt-Pd/MWCNTs was considerably less than the change in Pt/MWCNTs or Pt/C. The average particle size (XRD) was 3.5nm and 4nm for Pt/MWCNTs and Pt-Pd/MWCNTs, respectively. A moderate degree of alloying was determined for the material. The application of Pt-Pd electrocatalysts in DEGFCs should be advantageous. [Spanish] Electrocatalizadores Pt-Pd/MWCNTs (relacion atomic Pt:Pd 43:57) y Pt/MWCNTs fueron sintetizados y evaluados como catodos para la reaccion de reduccion del oxigeno (ORR) con aplicacion del celdas de consumo directo de etilenglicol (Direct Ethylene Glycol Fuel Cells, o DEGFC). Como referencia, un material comercial tipo Pt/C fue tambien evaluado. Se encontro que Pt-Pd/MWCNTs tiene una alta capacidad de tolerancia al etilenglicol (EG) y una selectividad mayor hacia la ORR comparado con el catodo basado en Pt-solo. Como resultado, el cambio en potencial de inicio de la ORR, Eonset, en Pt-Pd/MWCNTs fue considerablemente menor que el cambio en Pt/MWCNTs o Pt/C. La talla de particula promedio (de XRD) fue 3.5 nm y 4 nm para Pt/MWCNTs y Pt-Pd/MWCNTs, respectivamente. Un moderado grado de aleacion fue determinado para el material. Una aplicacion ventajosa para electrocatalizadores tipo Pt-Pd debe ser en DEGFCs.

  14. Synthesis of Ni-Pt catalysts and characterization

    International Nuclear Information System (INIS)

    Santos, Everton R.F. dos; Sousa, Bianca Viana de; Barbosa, Antonielly dos Santos; Leite, Romulo C.N.; Rodrigues, Meiry G.F.

    2009-01-01

    In this work, bifunctionals catalysts using the MCM-22 zeolite as support and the nickel and platinum metal as hydrogenation/dehydrogenation sites were prepared. The method used for metal dispersion on the zeolite was the competitive ion exchange, using the amine complex [Pt(NH 3 ) 4 ]Cl 2 and [Ni(NH 3 ) 6 ]Cl 2 . After the exchange reactions, the samples were calcinated at 500 deg C for 2 hours and reduced at this same temperature under hydrogen flow. The MCM-22 zeolite and samples containing the metal were characterized by the techniques of: EDX, XRD, DTA/TGA. The diffractions of the precursor MCM-22 (P) presented typical peaks of the MWW topology composed by intercalated lamellar layers with organic molecules that are constituents of the template (HMI). According to the XRD pattern of the calcinated sample, no peaks related to the organic material which is responsible to produce the MCM-22 zeolite were detected. By thermogravimetry it was verified that the removal of the template took place between 500 and 650 deg C proving the effectiveness of the removal process. The chemical analysis by X-ray spectrometric was evidenced this the incorporation in the zeolites of platinum and nickel for all the texts in study. Results from XRD confirming the stability and crystal in study of zeolites. (author)

  15. Panorama 2010: Are Li, Ni, Pt and Pd 'critical' metals?

    International Nuclear Information System (INIS)

    Saniere, A.; Vinot, S.; Christmann, P.

    2010-01-01

    Heavily dependent on petroleum, the transport industry is seeking technological solutions to lessen this reliance and reduce its CO 2 emissions, such as hybrid or electric vehicles or fuel cells cars. But these solutions are in turn dependent on a few metals that have some of the same characteristics as hydrocarbons, e.g. they are finite resources present in geographic concentrations. For how long will lithium, nickel, platinum and palladium be available for our use? Will the importance of their applications and the implications of their geographic distribution make them critical in the world economy? (author)

  16. NiPt hollow nanocatalyst: Green synthesis, size control and electrocatalysis

    Directory of Open Access Journals (Sweden)

    Aixian Shan

    2014-04-01

    Full Text Available Nearly monodispersed hollow nanospheres of bimetallic NiPt have been synthesized by a one-pot wet chemical method at room temperature with a precursor Ni nanocompound as a sacrificial template. The size control is carried out via the sacrificial template, from about 35 nm to nearly 100 nm in diameter. The shell thickness of the NiPt hollow sphere reaches down to as thin as 2–3 nm slightly larger than a single layer of alloyed NiPt nanocrystallites. The product with the citric acid as surfactant exhibits enhanced oxygen reduction activities compared to a commercial Pt/C catalyst and the hollow nanospheres coated with PVP. It has potential applications in fuel cells, biotechnology and environmental chemistry with the facile synthesis, low cost and excellent electrocatalytic activity.

  17. The effect of stress and magnetostriction on the anisotropy of CoNi/Pt multilayers

    NARCIS (Netherlands)

    van Drent, W.P.; van Drent, W.P.; Bijker, M.D.; Lodder, J.C.

    1996-01-01

    An attempt is made to correlate the effective magnetic anisotropy of sputtered CoNi/Pt multilayers to the average stress in the thin film. It was found that compressive film stress decreases the perpendicular magnetic anisotropy.

  18. Preparation of a Pd-Pt alloy on alumina and its application for a gas chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Minsoo [Korea Atomic Energy Research Institute, 150 Deokjin-dong, Yuseong, Daejeon 305-353 (Korea, Republic of)]. E-mail: minm@kaeri.re.kr; Paek, Seungwoo [Korea Atomic Energy Research Institute, 150 Deokjin-dong, Yuseong, Daejeon 305-353 (Korea, Republic of); Ahn, Do-Hee [Korea Atomic Energy Research Institute, 150 Deokjin-dong, Yuseong, Daejeon 305-353 (Korea, Republic of); Kim, Kwang-Rag [Korea Atomic Energy Research Institute, 150 Deokjin-dong, Yuseong, Daejeon 305-353 (Korea, Republic of); Yim, Sung-Paal [Korea Atomic Energy Research Institute, 150 Deokjin-dong, Yuseong, Daejeon 305-353 (Korea, Republic of); Chung, Hongsuk [Korea Atomic Energy Research Institute, 150 Deokjin-dong, Yuseong, Daejeon 305-353 (Korea, Republic of)

    2007-08-30

    In this study we attempted to obtain a Pd-Pt alloy on alumina (PPA) by using an impregnation and alcohol reduction method for the purpose of a hydrogen isotopes separation, in which {alpha}-alumina powder was impregnated into an ethanol water (1/1, w/w) solution containing PdCl{sub 2}, PtCl{sub 2}, and polyvinylpyrrolidone (PVP, MW = 10,000). The sample was dried, reduced by hydrogen, and thermally treated at 1073 K. Thus, two kinds of PPA (Pd content 17 and 29 wt%) were achieved. The produced PPA showed a good crystallinity from the XRD analysis and it exhibited an adequate hydrogen desorption isotherm as a packing material for the separation of hydrogen isotopes. GC columns packed with PPA and Cu powder were used for the separation of a 29.2% D{sub 2}-H{sub 2} gas mixture at 303 and 343 K. The experimental result showed a good separation efficiency of the hydrogen isotopes for the GC process. Consequently, the suggested technique for the production of a Pd-Pt alloy on alumina was proven to be successful.

  19. High-activity PtRuPd/C catalyst for direct dimethyl ether fuel cells.

    Science.gov (United States)

    Li, Qing; Wen, Xiaodong; Wu, Gang; Chung, Hoon T; Gao, Rui; Zelenay, Piotr

    2015-06-22

    Dimethyl ether (DME) has been considered as a promising alternative fuel for direct-feed fuel cells but lack of an efficient DME oxidation electrocatalyst has remained the challenge for the commercialization of the direct DME fuel cell. The commonly studied binary PtRu catalyst shows much lower activity in DME than methanol oxidation. In this work, guided by density functional theory (DFT) calculation, a ternary carbon-supported PtRuPd catalyst was designed and synthesized for DME electrooxidation. DFT calculations indicated that Pd in the ternary PtRuPd catalyst is capable of significantly decreasing the activation energy of the CO and CH bond scission during the oxidation process. As evidenced by both electrochemical measurements in an aqueous electrolyte and polymer-electrolyte fuel cell testing, the ternary catalyst shows much higher activity (two-fold enhancement at 0.5 V in fuel cells) than the state-of-the-art binary Pt50 Ru50 /C catalyst (HiSPEC 12100). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. CO adsorption and kinetics on well-characterized Pd films on Pt( 1 1 1 ) in alkaline solutions

    Science.gov (United States)

    Arenz, M.; Stamenkovic, V.; Schmidt, T. J.; Wandelt, K.; Ross, P. N.; Markovic, N. M.

    2002-05-01

    The electrochemistry of CO on a bare Pt(1 1 1) electrode as well as a Pt(1 1 1) electrode modified with pseudomorphic thin palladium films has been studied in alkaline solution by means of Fourier transform infrared (FTIR) spectroscopy. First Pd films were prepared and well characterized in ultra high vacuum and subsequently transferred into the electrochemical cell for the registration of the voltammetric profiles. The charge corresponding to the formation of underpotentially deposited hydrogen (H upd) on these Pt(1 1 1)- xPd surfaces was established in sulfuric acid solution as a function of x (0⩽ x⩽1 Pd monolayer (ML)). All subsequent measurements were then performed on electrochemically deposited palladium films using the above H upd charge vs. Pd coverage relationship to evaluate the amount of electrochemically deposited palladium. FTIR spectra for CO adsorbed on 1 ML and a submonolayer coverage are compared to those of the unmodified Pt(1 1 1) surface, all surfaces having identical 2D lattice structures. Infrared absorption bands of CO bound on either Pt(1 1 1) or Pt(1 1 1)-1 ML Pd are clearly distinguished. Spectra of CO adsorbed on Pd submonolayers show characteristic features of both CO bound to Pt and to Pd, indicating that on Pt(1 1 1)- xPd surfaces there is no coupling between Pt-CO ad and Pd-CO ad molecules. The kinetics of CO oxidation on these surfaces is determined either by rotating disk electrode measurements or by FTIR spectroscopy, monitoring the CO 32- production. The oxidation of CO ad on Pt(1 1 1) and on Pd modified platinum surfaces starts at the same potential, at ≈0.2 V. The oxidation rate is, however, considerably lower on the Pt(1 1 1)- xPd surfaces than on the Pt(1 1 1) surface. The kinetics of CO oxidation appears to be determined by the nature of adsorbed hydroxyl anions (OH ad), which are more strongly (less active) adsorbed on the highly oxophilic Pd atoms.

  1. Magnetic porous PtNi/SiO2 nanofibers for catalytic hydrogenation of p-nitrophenol

    Science.gov (United States)

    Guan, Huijuan; Chao, Cong; Kong, Weixiao; Hu, Zonggao; Zhao, Yafei; Yuan, Siguo; Zhang, Bing

    2017-06-01

    In this work, the mesoporous SiO2 nanofibers from pyrolyzing precursor of electrospun nanofibers were employed as support to immobilize PtNi nanocatalyst (PtNi/SiO2 nanofibers). AFM, XRD, SEM, TEM, XPS, ICP-AES and N2 adsorption/desorption analysis were applied to systematically investigate the morphology and microstructure of as-prepared products. Results showed that PtNi alloy nanoparticles with average diameter of 18.7 nm were formed and could be homogeneously supported on the surface of porous SiO2 nanofiber, which further indicated that the SiO2 nanofibers with well-developed porous structure, large specific surface area, and roughened surface was a benefit for the support of PtNi alloy nanoparticles. The PtNi/SiO2 nanofibers catalyst exhibited an excellent catalytic activity towards the reduction of p-nitrophenol, and the catalyst's kinetic parameter ( k n = 434 × 10-3 mmol s-1 g-1) was much higher than those of Ni/SiO2 nanofibers (18 × 10-3 mmol s-1 g-1), Pt/SiO2 nanofibers (55 × 10-3 mmol s-1 g-1) and previous reported PtNi catalysts. The catalyst could be easily recycled from heterogeneous reaction system based on its good magnetic properties (the Ms value of 11.48 emu g-1). In addition, PtNi/SiO2 nanofibers also showed an excellent stability and the conversion rate of p-nitrophenol still could maintain 94.2% after the eighth using cycle.

  2. Efficiency of bimetallic PtPd on polydopamine modified on various carbon supports for alcohol oxidations

    Science.gov (United States)

    Pinithchaisakula, A.; Ounnunkad, K.; Themsirimongkon, S.; Promsawan, N.; Waenkaew, P.; Saipanya, S.

    2017-02-01

    In this work, the preparation, characterization, and electrocatalytic analysis of the catalysts on various carbon substrates for direct alcohol fuel cells were studied. Selected carbons were modified with/without polydopamine (labelled as PDA-C and C) and further metal electrodeposited incorporated onto the glassy carbon (labelled as 5Pt1Pd/PDA-C and 5Pt1Pd/C). Four various carbon materials were used e.g. graphite (G), carbon nanotube (CNT), graphene (GP) and graphene oxide (GO) and the carbons were modified with PDA denoted as PDA-G, PDA-CNT, PDA-GP and PDA-GO, respectively. The transmission electron microscopy (TEM) and scanning electron microscopy (SEM) experimental observation showed narrow size distribution of metal anchored on the PDA-C and C materials. Chemical compositions and oxidation states of the catalysts were determined by X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX). The catalytic performances for small organic electro-oxidation (e.g. methanol and ethanol) were measured by cyclic voltammetry (CV). Among different PDA-C and C catalysts, monometallic Pt showed less activity than the bimetallic catalysts. Among catalysts with PDA, the 5Pt1Pd/PDA-GO catalyst facilitated methanol and ethanol oxidations with high oxidation currents and If/Ib value and stability with low potentials while among catalysts without PDA, the 5Pt1Pd/CNT provides highest activity and stability. It was found that the catalysts with PDA provided high activity and stability than the catalysts without PDA. The improved catalytic performance of the prepared catalysts could be related to the higher active surface area from polymer modification and bimetallic catalyst system in the catalyst composites.

  3. THE Pd-Ni-Fe-S PHASE SYSTEM AT 550 AND 400 degrees C

    DEFF Research Database (Denmark)

    Makovicky, Emil; Karup-Møller, Sven

    2016-01-01

    with mss, Pd is concentrated in the sulfide melt, especially at a low temperature. At low temperatures or high S fugacities, nickel prefers mss but pentlandite and similar to(Ni,Fe)(3 +/- x)S-2 complicate this simple scheme. For mineral associations with elevated sulfur fugacities, pyrrhotite (mss) appears...... to be a principal solid-state collector of Pd at high temperatures, with its gradual release on cooling, making it available for subsequent reactions. At low sulfur fugacities Pd concentrates in its Fe-Ni alloys. Because of the inverse relationship between Ni solubility in PdS and the temperature of formation...

  4. Anomalous magnetic moments in Fe-Pt and Fe-Pd Invar alloys under high pressure

    CERN Document Server

    Matsushita, M; Endo, S; Ishizuka, M; Kindo, K; Ono, F

    2002-01-01

    Magnetization measurements have been carried out for disordered Fe sub 7 sub 2 Pt sub 2 sub 8 , Fe sub 6 sub 6 Pd sub 3 sub 4 , and Fe sub 6 sub 8 Pd sub 3 sub 2 Invar alloys under high pressure using a technique combining a pressure-clamp-type Drickamer cell and a pulse magnet. In Fe sub 7 sub 2 Pt sub 2 sub 8 at room temperature, the magnetization decreased rapidly with increasing pressure up to 2.5 GPa, but above 2.5 GPa the rate of decrease became small and remained at a small value up to 5.6 GPa. In Fe-Pd Invar alloys at room temperature, the magnetization decreased linearly with increasing pressure. But, at 4.2 K, the change of magnetization with pressure was small in Fe sub 6 sub 6 Pd sub 3 sub 4 , which means that Fe sub 6 sub 6 Pd sub 3 sub 4 behaves as a strong ferromagnet.

  5. Antisite-defect-induced surface segregation in ordered NiPt alloy

    DEFF Research Database (Denmark)

    Pourovskii, L.V.; Ruban, Andrei; Abrikosov, I.A.

    2003-01-01

    alloys corresponds to the (111) truncation of the bulk L1(0) ordered structure. However, the (111) surface of the nickel deficient Ni49Pt51 alloy is strongly enriched by Pt and should exhibit the pattern of the 2x2 structure. Such a drastic change in the segregation behavior is due to the presence...

  6. Electrodeposited Pd-Ni-Mo film as a cathode material for hydrogen evolution reaction

    International Nuclear Information System (INIS)

    Tang, Junlei; Zhao, Xuhui; Zuo, Yu; Ju, Pengfei; Tang, Yuming

    2015-01-01

    A Pd-Ni-Mo film was prepared on stainless steel substrate as a novel electrode material for hydrogen evolution reaction catalysis. The surface micro-morphology, chemical composition and microstructure of the Pd-Ni-Mo film were characterizated with SEM, EDS, XPS and TEM. The obtained film is a multiple phase ternary alloy containing crystallines and amorphous phases. The electrochemical measurements showed that the Pd-Ni-Mo film has excellent catalytic activity for hydrogen evolution reaction with good corrosion resistance in 1 M NaOH solution. The proton discharge electrosorption is the rate determining step of hydrogen evolution reaction on Pd-Ni-Mo film surface. The better electrocatalysis performance of the Pd-Ni-Mo film is attributed to its larger real surface as well as the enhanced electrochemical activity of the film surface due to the alloying effect

  7. Crystallization and Glass Formation in Liquid pd0.45Ni0.55

    International Nuclear Information System (INIS)

    Kart, S.O.

    2004-01-01

    Constant temperature-constant pressure (TPN) and constant temperature-constant volume (TVN) dynamics simulations are performed to investigate the glass-forming ability of the eutectic composition of Pd-Ni system under rapid quenching from the liquid state. We use the quantum Sutton-Chen many body potentials for Pd and Ni to examine Pd-Ni alloy. Liquid Pd 0 .45Ni 0 .55 becomes glass at the fast and intermediate cooling rates, while it forms a face-centered-cubic (fcc) crystal at the slow cooling rate. The relation between the cooling rates and glass transition temperatures is revealed. The results of the simulation also indicate that the diffusion coefficients of the system decrease rapidly with decreasing temperature above their glass transition temperatures. The viscosity values calculated for the liquid and supercooled region shows that Pd 0 .45Ni 0 .55 is a strong liquid

  8. Low Pt content direct methanol fuel cell anode catalyst: nanophase PtRuNiZr

    Science.gov (United States)

    Narayanan, Sekharipuram R. (Inventor); Whitacre, Jay F. (Inventor)

    2010-01-01

    A method for the preparation of a metallic material having catalytic activity that includes synthesizing a material composition comprising a metal content with a lower Pt content than a binary alloy containing Pt but that displays at least a comparable catalytic activity on a per mole Pt basis as the binary alloy containing Pt; and evaluating a representative sample of the material composition to ensure that the material composition displays a property of at least a comparable catalytic activity on a per mole Pt basis as a representative binary alloy containing Pt. Furthermore, metallic compositions are disclosed that possess substantial resistance to corrosive acids.

  9. First principles investigation of the activity of thin film Pt, Pd and Au surface alloys for oxygen reduction

    DEFF Research Database (Denmark)

    Tripkovic, Vladimir; Hansen, Heine Anton; Rossmeisl, Jan

    2015-01-01

    driving force for surface segregation, diffusion to defects or surface self-assembling. On the basis of stability and activity analysis we conclude that the near surface alloy of Pd in Pt and some PdAu binary and PtPdAu ternary thin films with a controlled amount of Au are the best catalysts for oxygen......Further advances in fuel cell technologies are hampered by kinetic limitations associated with the sluggish cathodic oxygen reduction reaction. We have investigated a range of different formulations of binary and ternary Pt, Pd and Au thin films as electrocatalysts for oxygen reduction. The most...... active binary thin films are near-surface alloys of Pt with subsurface Pd and certain PdAu and PtAu thin films with surface and/or subsurface Au. The most active ternary thin films are with pure metal Pt or Pd skins with some degree of Au in the surface and/or subsurface layer and the near-surface alloys...

  10. Use of Hydrogen Chemisorption and Ethylene Hydrogenation as Predictors for Aqueous Phase Reforming of Lactose over Ni@Pt and Co@Pt Bimetallic Overlayer Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Lai, Qinghua; Skoglund, Michael D.; Zhang, Chen; Morris, Allen R.; Holles, Joseph H.

    2016-10-20

    Overlayer Pt on Ni (Ni@Pt) or Co (Co@Pt) were synthesized and tested for H2 generation from APR of lactose. H2 chemisorption descriptor showed that Ni@Pt and Co@Pt overlayer catalysts had reduced H2 adsorption strength compared to a Pt only catalyst, which agree with computational predictions. The overlayer catalysts also demonstrated lower activity for ethylene hydrogenation than the Pt only catalyst, which likely resulted from decreased H2 binding strength decreasing the surface coverage of H2. XAS results showed that overlayer catalysts exhibited higher white line intensity than the Pt catalyst, which indicates a negative d-band shift for the Pt overlayer, further providing evidence for overlayer formation. Lactose APR studies showed that lactose can be used as feedstock to produce H2 and CO under desirable reaction conditions. The Pt active sites of Ni@Pt and Co@Pt overlayer catalysts showed significantly enhanced H2 production selectivity and activity when compared with that of a Pt only catalyst. The single deposition overlayer with the largest d-band shift showed the highest H2 activity. The results suggest that overlayer formation using directed deposition technique could modify the behavior of the surface metal and ultimately modify the APR activity.

  11. Characterization of 3R martensite in a Ni-40Al-15Pt bulk alloy

    Energy Technology Data Exchange (ETDEWEB)

    Clancy, Marie, E-mail: marie.clancy@monash.edu [Department of Materials Science and Technology, University of Limerick, Castletroy (Ireland); Pomeroy, Michael J. [Department of Materials Science and Technology, University of Limerick, Castletroy (Ireland); Materials and Surface Science Institute, University of Limerick, Castletroy (Ireland); Dickinson, Calum [Materials and Surface Science Institute, University of Limerick, Castletroy (Ireland)

    2012-05-15

    Highlights: Black-Right-Pointing-Pointer Three alloys of same composition but different thermal histories are investigated. Black-Right-Pointing-Pointer Inform the scientific community about martensite crystallography (3R) in NiAlPt. Black-Right-Pointing-Pointer Show how different the martensite composition is to adjacent untransformed {beta}-NiAl. Black-Right-Pointing-Pointer Show that cyclic and/or isothermal oxidation offer chemically different martensite. Black-Right-Pointing-Pointer Pt needs high temperatures in excess of 900 {sup o}C for its thermal activation. - Abstract: As Pt promotes the reversible martensite transformation, the aim of this study was to assess the influence of Pt on the crystallography of ({beta} Prime ) martensite, in terms of ordering adapted, twinning and stacking faults. The focused ion beam (FIB) milling process was used to prepare transmission electron microscopy (TEM) samples of the NiAlPt bulk alloys, whereby 3R, L1{sub 0} ordering of the martensite was confirmed. The addition of Pt, coupled with high temperature oxidation resulted in more stacking faults, due to greater Pt diffusion and subsequent enrichment in martensite. For Pt diffusion the temperature must be in excess of 900 Degree-Sign C, both for isothermal and cyclic oxidation. When the favorable temperature environment is achieved Pt can diffuse preferentially allowing for promotion of the transformation to martensite.

  12. Supergene neoformation of Pt-Ir-Fe-Ni alloys: multistage grains explain nugget formation in Ni-laterites

    Science.gov (United States)

    Aiglsperger, Thomas; Proenza, Joaquín A.; Font-Bardia, Mercè; Baurier-Aymat, Sandra; Galí, Salvador; Lewis, John F.; Longo, Francisco

    2017-10-01

    Ni-laterites from the Dominican Republic host rare but extremely platinum-group element (PGE)-rich chromitites (up to 17.5 ppm) without economic significance. These chromitites occur either included in saprolite (beneath the Mg discontinuity) or as `floating chromitites' within limonite (above the Mg discontinuity). Both chromitite types have similar iridium-group PGE (IPGE)-enriched chondrite normalized patterns; however, chromitites included in limonite show a pronounced positive Pt anomaly. Investigation of heavy mineral concentrates, obtained via hydroseparation techniques, led to the discovery of multistage PGE grains: (i) Os-Ru-Fe-(Ir) grains of porous appearance are overgrown by (ii) Ni-Fe-Ir and Ir-Fe-Ni-(Pt) phases which are overgrown by (iii) Pt-Ir-Fe-Ni mineral phases. Whereas Ir-dominated overgrowths prevail in chromitites from the saprolite, Pt-dominated overgrowths are observed within floating chromitites. The following formation model for multistage PGE grains is discussed: (i) hypogene platinum-group minerals (PGM) (e.g. laurite) are transformed to secondary PGM by desulphurization during serpentinization; (ii) at the stages of serpentinization and/or at the early stages of lateritization, Ir is mobilized and recrystallizes on porous surfaces of secondary PGM (serving as a natural catalyst) and (iii) at the late stages of lateritization, biogenic mediated neoformation (and accumulation) of Pt-Ir-Fe-Ni nanoparticles occurs. The evidence presented in this work demonstrates that in situ growth of Pt-Ir-Fe-Ni alloy nuggets of isometric symmetry is possible within Ni-laterites from the Dominican Republic.

  13. Hydrogen storage and stability properties of Pd-Pt solid-solution nanoparticles revealed via atomic and electronic structure.

    Science.gov (United States)

    Kumara, Loku Singgappulige Rosantha; Sakata, Osami; Kobayashi, Hirokazu; Song, Chulho; Kohara, Shinji; Ina, Toshiaki; Yoshimoto, Toshiki; Yoshioka, Satoru; Matsumura, Syo; Kitagawa, Hiroshi

    2017-11-06

    Bimetallic Pd 1-x Pt x solid-solution nanoparticles (NPs) display charging/discharging of hydrogen gas, which has relevance for fuel cell technologies; however, the constituent elements are immiscible in the bulk phase. We examined these material systems using high-energy synchrotron X-ray diffraction, X-ray absorption fine structure and hard X-ray photoelectron spectroscopy techniques. Recent studies have demonstrated the hydrogen storage properties and catalytic activities of Pd-Pt alloys; however, comprehensive details of their structural and electronic functionality at the atomic scale have yet to be reported. Three-dimensional atomic-scale structure results obtained from the pair distribution function (PDF) and reverse Monte Carlo (RMC) methods suggest the formation of a highly disordered structure with a high cavity-volume-fraction for low-Pt content NPs. The NP conduction band features, as extracted from X-ray absorption near-edge spectra at the Pd and Pt L III -edge, suggest that the Pd conduction band is filled by Pt valence electrons. This behaviour is consistent with observations of the hydrogen storage capacity of these NPs. The broadening of the valence band width and the down-shift of the d-band centre away from the Fermi level upon Pt substitution also provided evidence for enhanced stability of the hydride (ΔH) features of the Pd 1-x Pt x solid-solution NPs with a Pt content of 8-21 atomic percent.

  14. Low Pt content of carbon supported Pt-Ni-TiO2 nanotube electrocatalysts for direct methanol fuel cell

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Q.Z; Wu, X.; Ma, Z.F. [Shanghai Jiao Tong Univ., Shanghai, (China). Dept. of Chemical Engineering

    2008-07-01

    Interest in titanium oxide (TiO2) nanomaterial is growing due to their special characteristics for optics, catalysis, and photoelectricity conversion. In this study, the anatase/rutile crystalline of TiO2 nanoparticles was synthesized by co-deposition. TiO2 nanotubes were then obtained by microwave irradiations. This paper described the mechanism to fabricate TiO2 nanotubes. The conditions for preparing TiO2 nanotubes by microwave irradiation were optimized. Electrocatalysts were then prepared on the basis of the synthesized TiO2 nanotube. Their performances were investigated by the electro-oxidation of methanol. When Pt electrocatalysts were doped with a certain content of TiO2 nanotubes, they had more electrocatalytic activity for methanol electro-oxidation, particularly if the second transition metal, such as Ni, was added into the electrocatalyst. The electrocatalysts contained 5 and 10 wt per cent of Pt and Ni respectively. The 10 wt per cent TiO2 nanotubes showed better activities than any other catalysts for methanol electro-oxidation. According to XRD and TEM results, the size of nanoparticles of Pt became smaller after adding TiO2 nanotubes into the catalysts. It was concluded that here might be some interactions between Pt, Ni, and TiO2 nanotubes.

  15. Controlled Synthesis of Pd/Pt Core Shell Nanoparticles Using Area-selective Atomic Layer Deposition

    OpenAIRE

    Cao, Kun; Zhu, Qianqian; Shan, Bin; Chen, Rong

    2015-01-01

    We report an atomic scale controllable synthesis of Pd/Pt core shell nanoparticles (NPs) via area-selective atomic layer deposition (ALD) on a modified surface. The method involves utilizing octadecyltrichlorosilane (ODTS) self-assembled monolayers (SAMs) to modify the surface. Take the usage of pinholes on SAMs as active sites for the initial core nucleation, and subsequent selective deposition of the second metal as the shell layer. Since new nucleation sites can be effectively blocked by s...

  16. Trimetallic nanostructures: the case of AgPd/Pt multiply twinned nanoparticles

    OpenAIRE

    Khanal, Subarna; Bhattarai, Nabraj; Velázquez-Salazar, J. Jesús; Bahena, Daniel; Soldano, German; Ponce, Arturo; Mariscal, Marcelo M.; Mejía-Rosales, Sergio; José-Yacamán, Miguel

    2013-01-01

    We report the synthesis, structural characterization, and atomistic simulations of AgPd/Pt trimetallic (TM) nanoparticles. Two types of structure were synthesized using a relatively facile chemical method: multiply twinned core-shell, and hollow particles. The nanoparticles were small in size, with an average diameter of 11 nm and a narrow distribution, and their characterization by aberration corrected scanning transmission electron microscopy allowed us to probe the structure of the particl...

  17. The Precious metals (Au, Ag, Pt, Pd, Rh) adsorption on the Silicon – organic sorbents

    OpenAIRE

    G Burmaa; S Alen; Yu Ganchimeg; I Sukhbaatar

    2014-01-01

    Sorption activity of two types of Silicon-organic sorbents for the previous metals has been studied. A polymer – poly (3- silsesquioxanilpropylthiocarbamate) - 3- silsesquioxanilpropylammonium which was obtained by the hydrolytic poly-condensation reaction and has been determined its physical, chemical characteristics and its sorption activity for the Ag(I), Au(III), Pt(IV), Pd(II), Rh(III). It has been found out that the sorbent shows high static sorption of Gold (III), Mercury (II) at acidi...

  18. The Influence of Pt Atomic Ratio in the Activity PtNi/C Nanocatalysts for the PEMFC

    Directory of Open Access Journals (Sweden)

    Nenen Rusnaeni

    2011-08-01

    Full Text Available Pt-Ni/C alloy nanocatalysts synthesized by polyol method with different atomic ratio are investigated to enhance activity of the oxygen reduction reaction (ORR for fuel cell applications. Prepared catalysts are characterized by various techniques, such as X-ray diffraction (XRD, scanning electron microscopy (SEM-EDX, and cyclic voltammetry (CV. XRD analysis shows that all prepared catalysts with different atomic ratio exhibit face centered cubic and have smaller lattice parameters than pure Pt catalyst. The mean particle size of the catalysts are between 4.3 to 6.3 nm. Cyclic voltammograms with scan rate 5 mV s-1 at 25oC obtain range the electrochemical active surface (EAS between 40 to 164 cm2/mgPt, mass activity (MA and specific activity (SA of nanocatalysts PtNi/C in the potential range 900 mV versus RHE between 3.61 to 8.42 mA/mgPt, and 0.05 to 0.09.

  19. Direct methanol fuel cells: Pt-Ni/C binary electrocatalysts; Celulas a combutivel de metanol direto: eletrocatalisadores binarios de Pt-Ni/C

    Energy Technology Data Exchange (ETDEWEB)

    Salgado, Jose Ricardo Cezar; Antolini, Ermete; Santos, Ana Maria dos; Gonzalez, Ernesto Rafael [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Inst. de Quimica], e-mail: salgado@iqsc.usp.br

    2004-07-01

    Direct methanol fuel cells use platinum alloys as more efficient catalysts than platinum. In the case of binary alloys, the second metal affects several properties of platinum, like the interatomic distance, the electronic density and the capacity of forming oxygenated species at lower potentials. In this work, Pt-Ni catalysts supported on high surface area carbon (Pt-Ni/C) were prepared and characterized, and tested as catalysts in the anode and the cathode in direct methanol fuel cells. In both cases the performance of the material was better than that of Pt/C, and comparing the two situations it was better when the material was used in the cathode. The improved performance in the cathode was attributed to the nickel that forms a true alloy with platinum, while the better performance in the anode was attributed to the presence of nickel oxides. (author)

  20. Synthesis, characterization and magnetic properties of highly monodispersed PtNi nanoparticles

    International Nuclear Information System (INIS)

    Du, Juan-Juan; Yang, Yi; Zhang, Rong-Hua; Zhou, Xin-Wen

    2015-01-01

    In this paper, we report the controlled-synthesis of PtNi nanoparticles through galvanic displacement reaction and chemical reduction. The size, composition and morphology of the products are characterized by transmission electron microscopy (TEM), powder X-ray diffraction (XRD), energy dispersed X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) analyses. The structure and composition of the PtNi nanoparticles can be controlled by adjusting the synthetic conditions. The possible formation mechanism is obtained from the academic analysis and experimental studies. The results of the magnetic measurement illustrate that the PtNi nanoparticles show a superparamagnetic behavior with a blocking temperature (T B ) about 8.0 K. - Highlights: • Highly monodispersed PtNi nanoparticles were synthesized by galvanic displacement reaction. • The formation of Pt nanocrystals was the foremost step because of its self-catalysis effect. • The PtNi nanoparticles show a superparamagnetic behavior with a T B about 8.0 K

  1. The effect of reducing agents on the electronic, magnetic and electrocatalytic properties of thiol-capped Pt/Co and Pt/Ni nanoparticles

    CSIR Research Space (South Africa)

    Mathe, NR

    2015-05-01

    Full Text Available The electronic, magnetic and electrocatalytic properties of bimetallic thiol-capped Pt/Co and Pt/Ni nanoparticles were synthesised using two reducing agents, NaBH(sub4) and N(sub2)H(sub4). X-ray diffraction analysis of the nanoparticles showed Pt...

  2. Pt-Pd bimetallic nanoparticles on MWCNTs: catalyst for hydrogen peroxide electrosynthesis

    Energy Technology Data Exchange (ETDEWEB)

    Felix-Navarro, R. M., E-mail: moi6salazar@hotmail.com; Beltran-Gastelum, M.; Salazar-Gastelum, M. I.; Silva-Carrillo, C.; Reynoso-Soto, E. A.; Perez-Sicairos, S.; Lin, S. W. [Centro de Graduados e Investigacion, Instituto Tecnologico de Tijuana (Mexico); Paraguay-Delgado, F. [Centro de Investigacion en Materiales Avanzados (Mexico); Alonso-Nunez, G. [Centro de Nanociencias y Nanotecnologia (Mexico)

    2013-08-15

    Bimetallic nanoparticles of Pt-Pd were deposited by the microemulsion method on a multiwall carbon nanotube (MWCNTs) to obtain a Pt-Pd/MWCNTs for electrocatalytic reduction of O{sub 2} to H{sub 2}O{sub 2}. The activity and selectivity of the catalyst was determined qualitatively by the rotating disk electrode method in acidic medium. The catalyst was spray-coated onto a reticulated vitreous carbon substrate and quantitatively was tested in bulk electrolysis for 20 min under potentiostatic conditions (0.5 V vs Ag/AgCl) in a 0.5 M H{sub 2}SO{sub 4} electrolyte using dissolved O{sub 2}. The bulk electrolysis experiments show that the Pt-Pd/MWCNTs catalyst is more efficient for H{sub 2}O{sub 2} electrogeneration than a MWCNTs catalyst. Nitrobenzene degradation by electrogenerated H{sub 2}O{sub 2} alone and Electro-Fenton process were also tested. Our results show that both processes decompose nitrobenzene, but the Electro-Fenton process does it more efficiently. The prepared nanoparticulated catalyst shows a great potential in environmental applications.

  3. Controlled Synthesis of Pd/Pt Core Shell Nanoparticles Using Area-selective Atomic Layer Deposition.

    Science.gov (United States)

    Cao, Kun; Zhu, Qianqian; Shan, Bin; Chen, Rong

    2015-02-16

    We report an atomic scale controllable synthesis of Pd/Pt core shell nanoparticles (NPs) via area-selective atomic layer deposition (ALD) on a modified surface. The method involves utilizing octadecyltrichlorosilane (ODTS) self-assembled monolayers (SAMs) to modify the surface. Take the usage of pinholes on SAMs as active sites for the initial core nucleation, and subsequent selective deposition of the second metal as the shell layer. Since new nucleation sites can be effectively blocked by surface ODTS SAMs in the second deposition stage, we demonstrate the successful growth of Pd/Pt and Pt/Pd NPs with uniform core shell structures and narrow size distribution. The size, shell thickness and composition of the NPs can be controlled precisely by varying the ALD cycles. Such core shell structures can be realized by using regular ALD recipes without special adjustment. This SAMs assisted area-selective ALD method of core shell structure fabrication greatly expands the applicability of ALD in fabricating novel structures and can be readily applied to the growth of NPs with other compositions.

  4. Characterization of Pt-Pd/C Electrocatalyst for Methanol Oxidation in Alkaline Medium

    Directory of Open Access Journals (Sweden)

    S. S. Mahapatra

    2011-01-01

    Full Text Available The Pt-Pd/C electrocatalyst was synthesized on graphite substrate by the electrochemical codeposition technique. The physicochemical characterization of the catalyst was done by SEM, XRD, and EDX. The electrochemical characterization of the Pt-Pd/C catalyst for methanol electro-oxidation was studied over a range of NaOH and methanol concentrations using cyclic voltammetry, quasisteady-state polarization, chronoamperometry, and electrochemical impedance spectroscopy. The activity of methanol oxidation increased with pH due to better OH species coverage on the electrode surface. At methanol concentration (>1.0 M, there is no change in the oxidation peak current density because of excess methanol at the electrode surface and/or depletion of OH− at the electrode surface. The Pt-Pd/C catalyst shows good stability and the low value of Tafel slope and charge transfer resistance. The enhanced electrocatalytic activity of the electrodes is ascribed to the synergistic effect of higher electrochemical surface area, preferred OH− adsorption, and ad-atom contribution on the alloyed surface.

  5. Atomic layer deposition of Pd and Pt nanoparticles for catalysis: on the mechanisms of nanoparticle formation

    International Nuclear Information System (INIS)

    Mackus, Adriaan J M; Weber, Matthieu J; Thissen, Nick F W; Garcia-Alonso, Diana; Vervuurt, René H J; Assali, Simone; Bol, Ageeth A; Verheijen, Marcel A; Kessels, Wilhelmus M M

    2016-01-01

    The deposition of Pd and Pt nanoparticles by atomic layer deposition (ALD) has been studied extensively in recent years for the synthesis of nanoparticles for catalysis. For these applications, it is essential to synthesize nanoparticles with well-defined sizes and a high density on large-surface-area supports. Although the potential of ALD for synthesizing active nanocatalysts for various chemical reactions has been demonstrated, insight into how to control the nanoparticle properties (i.e. size, composition) by choosing suitable processing conditions is lacking. Furthermore, there is little understanding of the reaction mechanisms during the nucleation stage of metal ALD. In this work, nanoparticles synthesized with four different ALD processes (two for Pd and two for Pt) were extensively studied by transmission electron spectroscopy. Using these datasets as a starting point, the growth characteristics and reaction mechanisms of Pd and Pt ALD relevant for the synthesis of nanoparticles are discussed. The results reveal that ALD allows for the preparation of particles with control of the particle size, although it is also shown that the particle size distribution is strongly dependent on the processing conditions. Moreover, this paper discusses the opportunities and limitations of the use of ALD in the synthesis of nanocatalysts. (paper)

  6. Cluster Chemistry in Electron-Poor Ae-Pt-Cd Systems (Ae=Ca, Sr, Ba): (Sr,Ba)Pt2Cd4, Ca6Pt8Cd16, and Its Known Antitype Er6Pd16Sb8

    Energy Technology Data Exchange (ETDEWEB)

    Samal, Saroj L. [Ames Laboratory; Gulo, Fakhili [Ames Laboratory; Corbett, John D. [Ames Laboratory

    2013-02-18

    Three new ternary polar intermetallic compounds, cubic Ca6Pt8Cd16, and tetragonal (Sr, Ba)Pt2Cd4 have been discovered during explorations of the Ae–Pt–Cd systems. Cubic Ca6Pt8Cd16 (Fm-3m, Z = 4, a = 13.513(1) Å) contains a 3D array of separate Cd8 tetrahedral stars (TS) that are both face capped along the axes and diagonally bridged by Pt atoms to generate the 3D anionic network Cd8[Pt(1)]6/2[Pt(2)]4/8. The complementary cationic surface of the cell consists of a face-centered cube of Pt(3)@Ca6 octahedra. This structure is an ordered ternary variant of Sc11Ir4 (Sc6Ir8Sc16), a stuffed version of the close relative Na6Au7Cd16, and a network inverse of the recent Er6Sb8Pd16 (compare Ca6Pt8Cd16). The three groups of elements each occur in only one structural version. The new AePt2Cd4, Ae = Sr, Ba, are tetragonal (P42/mnm,Z = 2, a ≈ 8.30 Å, c ≈ 4.47 Å) and contain chains of edge-sharing Cd4 tetrahedra along c that are bridged by four-bonded Ba/Sr. LMTO-ASA and ICOHP calculation results and comparisons show that the major bonding (Hamilton) populations in Ca6Pt8Cd16 and Er6Sb8Pd16 come from polar Pt–Cd and Pd–Sb interactions, that Pt exhibits larger relativistic contributions than Pd, that characteristic size and orbital differences are most evident for Sb 5s, Pt8, and Pd16, and that some terms remain incomparable, Ca–Cd versus Er–Pd.

  7. A PHREEQE database for Pd, Ni and Se

    International Nuclear Information System (INIS)

    Baeyens, B.

    1989-06-01

    This report presents a selection of thermodynamic data for Pd, Ni and Se to allow modelling of the speciation and solubility of these elements in repository safety analysis. Insufficient data are available in the literature to allow full appraisal of the data selected but, where possible, values were chosen from critical compilations or were checked for consistency between different sources. In an appendix, the data selected are presented in a format for direct use in the geochemical code PHREEQE. The report also includes examples of use of the database to examine the behaviour of these elements in chemical systems relevant to the Swiss nuclear waste management programme. Limitations of application and possible future work in this field are also discussed. (author) 12 tabs., 53 refs

  8. Pd-Ni-MWCNT nanocomposite thin films: preparation and structure

    Science.gov (United States)

    Kozłowski, Mirosław; Czerwosz, ElŻbieta; Sobczak, Kamil

    2017-08-01

    The properties of nanocomposite palladium-nickel-multi-walled (Pd-Ni-MWCNT) films deposited on aluminum oxide (Al2O3) substrate have been prepared and investigated. These films were obtained by 3 step process consisted of PVD/CVD/PVD methods. The morphology and structure of the obtained films were characterized by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) techniques at various stages of the film formation. EDX spectrometer was used to measurements of elements segregation in the obtained film. TEM and STEM (Scanning Transmission Electron Microscopy) observations showed MWCNTs decorated with palladium nanoparticles in the film obtained in the last step of film formation (final PVD process). The average size of the palladium nanoparticles observed both on MWCNTs and carbonaceous matrix does not exceed 5 nm. The research was conducted on the use of the obtained films as potential sensors of gases (e.g. H2, NH3, CO2) and bio-sensors or optical sensors.

  9. Fast microwave-assisted solvothermal synthesis of metal nanoparticles (Pd, Ni, Sn) supported on sulfonated MWCNTs: Pd-based bimetallic catalysts for ethanol oxidation in alkaline medium

    CSIR Research Space (South Africa)

    Ramulifho, T

    2012-01-01

    Full Text Available -MWCNT-Pd and its "mixed" bimetallic electrocatalysts (i.e., SF-MWCNT-PdSn mix and SF-MWCNT-PdNi) towards ethanol oxidation in alkaline medium was investigated. The result shows that the mixed Pd-based catalysts (obtained by simple ultrasonic...

  10. Trimetallic nanostructures: the case of AgPd-Pt multiply twinned nanoparticles

    Science.gov (United States)

    Khanal, Subarna; Bhattarai, Nabraj; Velázquez-Salazar, J. Jesús; Bahena, Daniel; Soldano, German; Ponce, Arturo; Mariscal, Marcelo M.; Mejía-Rosales, Sergio; José-Yacamán, Miguel

    2013-11-01

    We report the synthesis, structural characterization, and atomistic simulations of AgPd-Pt trimetallic (TM) nanoparticles. Two types of structure were synthesized using a relatively facile chemical method: multiply twinned core-shell, and hollow particles. The nanoparticles were small in size, with an average diameter of 11 nm and a narrow distribution, and their characterization by aberration corrected scanning transmission electron microscopy allowed us to probe the structure of the particles at an atomistic level. In some nanoparticles, the formation of a hollow structure was also observed, that facilitates the alloying of Ag and Pt in the shell region and the segregation of Ag atoms on the surface, affecting the catalytic activity and stability. We also investigated the growth mechanism of the nanoparticles using grand canonical Monte Carlo simulations, and we have found that Pt regions grow at overpotentials on the AgPd nanoalloys, forming 3D islands at the early stages of the deposition process. We found very good agreement between the simulated structures and those observed experimentally.We report the synthesis, structural characterization, and atomistic simulations of AgPd-Pt trimetallic (TM) nanoparticles. Two types of structure were synthesized using a relatively facile chemical method: multiply twinned core-shell, and hollow particles. The nanoparticles were small in size, with an average diameter of 11 nm and a narrow distribution, and their characterization by aberration corrected scanning transmission electron microscopy allowed us to probe the structure of the particles at an atomistic level. In some nanoparticles, the formation of a hollow structure was also observed, that facilitates the alloying of Ag and Pt in the shell region and the segregation of Ag atoms on the surface, affecting the catalytic activity and stability. We also investigated the growth mechanism of the nanoparticles using grand canonical Monte Carlo simulations, and we have

  11. From bio-mineralisation to fuel cells: biomanufacture of Pt and Pd nanocrystals for fuel cell electrode catalyst.

    Science.gov (United States)

    Yong, P; Paterson-Beedle, M; Mikheenko, I P; Macaskie, L E

    2007-04-01

    Biosynthesis of nano-scale platinum and palladium was achieved via enzymatically-mediated deposition of metal ions from solution. The bio-accumulated Pt(0) and Pd(0) crystals were dried, applied onto carbon paper and tested as anodes in a polymer electrolyte membrane (PEM) fuel cell for power production. Up to 100% and 81% of the maximum power generation was achieved by the bio-Pt and bio-Pd catalysts, respectively, compared to commercial fuel cell grade Pt catalyst. Hence, biomineralisation could pave the way for economical production of fuel cell catalysts since previous studies have shown that precious metals can be biorecovered from wastes into catalytically active bionanomaterials.

  12. Unusual Activity Trend for CO Oxidation on Pd(x)Au(140-x)@Pt Core@Shell Nanoparticle Electrocatalysts.

    Science.gov (United States)

    Luo, Long; Zhang, Liang; Henkelman, Graeme; Crooks, Richard M

    2015-07-02

    A theoretical and experimental study of the electrocatalytic oxidation of CO on PdxAu140-x@Pt dendrimer-encapsulated nanoparticle (DEN) catalysts is presented. These nanoparticles are comprised of a core having an average of 140 atoms and a Pt monolayer shell. The CO oxidation activity trend exhibits an unusual koppa shape as the number of Pd atoms in the core is varied from 0 to 140. Calculations based on density functional theory suggest that the koppa-shaped trend is driven primarily by structural changes that affect the CO binding energy on the surface. Specifically, a pure Au core leads to deformation of the Pt shell and a compression of the Pt lattice. In contrast, Pd, from the pure Pd cores, tends to segregate on the DEN surface, forming an inverted configuration having Pt within the core and Pd in the shell. With a small addition of Au, however, the alloy PdAu cores stabilize the core@shell structures by preventing Au and Pd from escaping to the particle surface.

  13. Pulse electrodeposition to prepare core-shell structured AuPt@Pd/C catalyst for formic acid fuel cell application

    Science.gov (United States)

    Lu, Xueyi; Luo, Fan; Song, Huiyu; Liao, Shijun; Li, Hualing

    2014-01-01

    A novel core-shell structured AuPt@Pd/C catalyst for the electrooxidation of formic acid is synthesized by a pulse electrodeposition process, and the AuPt core nanoparticles are obtained by a NaBH4 reduction method. The catalyst is characterized with X-ray powder diffraction and transmission electron microscopy, thermogravimetric analysis, cyclic voltammetry, CO stripping and X-ray photoelectron spectroscopy. The core-shell structure of the catalyst is revealed by the increase in particle size resulting from a Pd layer covering the AuPt core, and by a negative shift in the CO stripping peaks. The addition of a small amount of Pt improves the dispersion of Au and results in smaller core particles. The catalyst's activity is evaluated by cyclic voltammetry in formic acid solution. The catalyst shows excellent activity towards the anodic oxidation of formic acid, the mass activity reaches 4.4 A mg-1Pd and 0.83 A mg-1metal, which are 8.5 and 1.6 times that of commercial Pd/C. This enhanced electrocatalytic activity could be ascribed to the good dispersion of Au core particles resulting from the addition of Pt, as well as to the interaction between the Pd shell layer and the Au and Pt in the core nanoparticles.

  14. L1{sub 0} phase formation in ternary FePdNi alloys

    Energy Technology Data Exchange (ETDEWEB)

    Montes-Arango, A.M. [Department of Mechanical and Industrial Engineering, Northeastern University, Boston, MA 02115 (United States); Bordeaux, N.C. [Department of Chemical Engineering, Northeastern University, Boston, MA 02115 (United States); Liu, J.; Barmak, K. [Department of Applied Physics and Applied Mathematics, Columbia University, New York, NY 10027 (United States); Lewis, L.H., E-mail: lhlewis@neu.edu [Department of Mechanical and Industrial Engineering, Northeastern University, Boston, MA 02115 (United States); Department of Chemical Engineering, Northeastern University, Boston, MA 02115 (United States)

    2015-11-05

    Metallurgical routes to highly metastable phases are required to access new materials with new functionalities. To this end, the stability of the tetragonal chemically ordered L1{sub 0} phase in the ternary Fe–Pd–Ni system is quantified to provide enabling information concerning synthesis of L1{sub 0}-type FeNi, a highly attractive yet highly elusive advanced permanent magnet candidate. Fe{sub 50}Pd{sub 50−x}Ni{sub x} (x = 0–7 at%) samples were arc-melted and annealed at 773 K (500 °C) for 100 h to induce formation of the chemically ordered L1{sub 0} phase. Coupled calorimetry, structural and magnetic investigations allow determination of an isothermal section of the ternary Fe–Pd–Ni phase diagram featuring a single phase L1{sub 0} region near the FePd boundary for x < 6 at%. It is demonstrated that increased Ni content in Fe{sub 50}Pd{sub 50−x}Ni{sub x} alloys systematically decreases the order-disorder transition temperature, resulting in a lower thermodynamic driving force for the ordering phase transformation. The Fe{sub 50}Pd{sub 50−x}Ni{sub x} L1{sub 0} → fcc disordering transformation is determined to occur via a two-step process, with compositionally-dependent enthalpies and transition temperatures. These results highlight the need to investigate ternary alloys with higher Ni content to determine the stability range of the L1{sub 0} phase near the FeNi boundary, thereby facilitating kinetic access to the important L1{sub 0} FeNi ferromagnetic phase. - Highlights: • Chemical ordering in FePdNi enhances intrinsic and extrinsic magnetic properties. • 773 K annealed FePdNi alloys studied show a stable L1{sub 0} phase for Ni ≤ 5.2 at%. • Chemical disordering in FePdNi occurs by a previously unreported two-step process. • Ni additions to FePd dramatically decrease the chemical order-disorder temperature. • The chemical-ordering transformation kinetics are greatly affected by Ni content.

  15. Effect of local metal microstructure on adsorption on bimetallic surfaces: Atomic nitrogen on Ni/Pt(111)

    Science.gov (United States)

    Guo, Wei; Vlachos, Dionisios G.

    2013-05-01

    The adsorption of atomic nitrogen on Ni/Pt(111) surface bimetallics has been investigated as a function of the local microstructure of Ni and Pt atoms via density functional theory (DFT) calculations. Microstructures include surface and subsurface Ni atoms on Pt(111) as limiting cases, and also small clusters of Ni in the first and/or second layer of Pt. It is shown that the binding energy of N can be approximated as a perturbation from that on the host metal (Pt) with a linear short-ranged correction from the guest metal (Ni) that accounts for the coordination environment of nitrogen up to the 3rd nearest Ni neighbor. This model is rationalized with the d-band center theory. Coverage effects are also included. The model can be parameterized with a limited number of DFT calculations and applied to other bimetallic catalysts to estimate the coverage dependent binding energy on complex metal microstructures.

  16. Methane combustion reactivity during the metal→metallic oxide transformation of Pd-Pt catalysts: Effect of oxygen pressure

    Science.gov (United States)

    Qi, Wenjie; Ran, Jingyu; Zhang, Zhien; Niu, Juntian; Zhang, Peng; Fu, Lijuan; Hu, Bo; Li, Qilai

    2018-03-01

    Density functional theory combined with kinetic models were used to probe different kinetics consequences by which methane activation on different oxygen chemical potential surfaces as oxygen pressure increased. The metallic oxide → metal transformation temperature of Pd-Pt catalysts increased with the increase of the Pd content or/and O2 pressure. The methane conversion rate on Pt catalyst increased and then decreased to a constant value when increasing the O2 pressure, and Pd catalyst showed a poor activity performance in the case of low O2 pressure. Moreover, its activity increased as the oxygen chemical potential for O2 pressure increased in the range of 2.5-10 KPa. For metal clusters, the Csbnd H bond and Odbnd O bond activation steps occurred predominantly on *-* site pairs. The methane conversion rate was determined by O2 pressure because the adsorbed O atoms were rapidly consumed by other adsorbed species in this kinetic regime. As the O2 pressure increased, the metallic active sites for methane activation were decreased and there was no longer lack of adsorbed O atoms, resulting in the decrease of the methane conversion rate. Furthermore, when the metallic surfaces were completely covered by adsorbed oxygen atoms at higher oxygen chemical potentials, Pt catalyst showed a poor activity due to a high Csbnd H bond activation barrier on O*sbnd O*. In the case of high O2 pressure, Pd atoms preferred to segregate to the active surface of Pd-Pt catalysts, leading to the formation of PdO surfaces. The increase of Pd segregation promoted a subsequent increase in active sites and methane conversion rate. The PdO was much more active than metallic and O* saturated surfaces for methane activation, inferred from the theory and experimental study. Pd-rich bimetallic catalyst (75% molar Pd) showed a dual high methane combustion activity on O2-poor and O2-rich conditions.

  17. Controlled decoration of Pd on Ni(OH)2 nanoparticles by atomic layer deposition for high ethanol oxidation activity

    Science.gov (United States)

    Jiang, Yiwu; Chen, Jinwei; Zhang, Jie; Zeng, Yaping; Wang, Yichun; Zhou, Feilong; Kiani, Maryam; Wang, Ruilin

    2017-10-01

    A new catalysts electrode was prepared by in situ controllable deposition of Pd shell layer on the gas diffusion layer (GDL) supported Ni(OH)2 nanoparticles using atomic layer deposition (ALD) technology. High resolution transmission electron microscope confirmed that the Ni(OH)2 core was coated by several atomic layers of Pd. The core-shell Ni(OH)2@Pd catalysts with different thickness of Pd shell are easily prepared by controlling ALD cycle. Electrochemical tests showed that the 100-Ni(OH)2@Pd/GDL catalyst prepared via 100 ALD cycles presented the highest catalytic activity for ethanol electro-oxidation reaction (EOR). The peaking current density of Ni(OH)2@Pd/GDL was 1439 mA mgPd-1, which was about 2.75 times as high as that of Pd/GDL (522 mA mgPd-1). The shift in binding energy of the XPS peak of Pd in Ni(OH)2@Pd catalyst confirmed the strong interaction between the Pd shell and the Ni(OH)2 core. We suggested that the high catalytic activity of Ni(OH)2@Pd/GDL catalyst layer may be due to following factors: high Pd dispersion arising from the core-shell structure, high Pd utilization because of the in situ deposition of Pd on catalyst layer and the interaction between the Pd shell and the Ni(OH)2 core. Herein, the ALD technology exhibits a promising application prospect for preparing core-shell structure and precisely controlling shell thickness of nano-composite as an electro-catalyst toward EOR.

  18. [Co/Pd]4–Co–Pd–NiFe spring magnets with highly tunable and uniform magnetization tilt angles

    International Nuclear Information System (INIS)

    Anh Nguyen, T.N.; Benatmane, N.; Fallahi, V.; Fang, Yeyu; Mohseni, S.M.; Dumas, R.K.; Åkerman, Johan

    2012-01-01

    By varying the Pd thickness (t Pd ) from 0 to 8 nm in [Co/Pd] 4 /Co/Pd(t Pd )/NiFe exchange springs, we demonstrate (i) continuous tailoring of the exchange coupling between a [Co/Pd] 4 /Co layer with perpendicular anisotropy, and a NiFe layer with an in-plane easy axis, (ii) tuning of the NiFe out-of-plane magnetization angle from 20 ○ to 80 ○ , and (iii) an up to two-fold increase in the NiFe damping. The partial decoupling also results in a highly uniform NiFe magnetization. These properties make [Co/Pd] 4 /Co/Pd(t Pd )/NiFe spring magnets ideal candidates for use as tilted polarizers, by combining stable and well-defined spin directions of its carriers with a high degree of angular freedom. - Highlights: ► Continuous tailoring of the exchange coupling between a [Co/Pd] 4 /Co layer and a NiFe layer. ►Tuning of the NiFe out-of-plane magnetization angle from 20° to 80°. ►A highly uniform NiFe magnetization. ►An up to two-fold increase in the NiFe damping.

  19. Microstructure and mechanical properties of Pt-added and Pd-added Zr-20Nb alloys and their metal release in 1 mass% lactic acid solution

    Energy Technology Data Exchange (ETDEWEB)

    Kondo, R.; Suyalatu,; Tsutsumi, Y. [Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University, Chiyoda-ku, Tokyo 101-0062 (Japan); Doi, H., E-mail: doi.met@tmd.ac.jp [Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University, Chiyoda-ku, Tokyo 101-0062 (Japan); Nomura, N. [Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University, Chiyoda-ku, Tokyo 101-0062 (Japan); Hanawa, T. [Institute of Biomaterials and Bioengineering, Tokyo Medical and Dental University, Chiyoda-ku, Tokyo 101-0062 (Japan); Graduate School of Engineering, University of Tokyo, Bunkyo-ku, Tokyo 113-8650 (Japan)

    2011-07-20

    The effects of Pt and Pd addition to a Zr-20Nb alloy on its microstructure and mechanical property, as well as the elution of metals from the alloys in lactic acid solution, were investigated. The microstructure was characterized with an X-ray diffractometer (XRD), an optical microscope (OM), and a transmission electron microscope (TEM). The mechanical properties were evaluated by a tensile test. The {beta} phase is dominantly observed in the Zr-20Nb as well as in the Pt-added and Pd-added Zr-20Nb alloys. Needle-like microstructures are observed in equiaxed grains in all alloys. Pd addition to the Zr-20Nb alloy suppresses {omega} phase formation more than Pt addition does. The 0.2% offset yield strength and the ultimate tensile strength of the Pt-added and Pd-added Zr-20Nb alloys increase with the Pt and Pd concentrations. XRD analysis revealed that the lattice parameter of {beta}-Zr in the Pt-added and Pd-added Zr-20Nb alloys decreases with the Pt and Pd concentrations. Pt and Pd solute in {beta}-Zr as a substitutional element and contribute to the increase in the strength by solid solution hardening. The addition of 2Pt and 2Pd to the Zr-20Nb alloy also improves metal elution from the alloys in lactic acid solution.

  20. Green synthesis of Pt-on-Pd bimetallic nanodendrites on graphene via in situ reduction, and their enhanced electrocatalytic activity for methanol oxidation

    International Nuclear Information System (INIS)

    Cai, Zhi-xiong; Liu, Cong-cong; Wu, Geng-huang; Chen, Xiao-mei; Chen, Xi

    2014-01-01

    Graphical abstract: - Highlights: • Porous 3D dendrite-like structure of Pt-on-Pd bimetallic nanostructures supported on graphene were prepared. • The surface of nanostructures was very “clean” because of the surfactant-free formation process and the use of green reagent. • The hetero-nanostructures showed excellent electrocatalytic performance in methanol oxidation. - Abstract: A green synthesis of Pt-on-Pd bimetallic nanodendrites supported on graphene (GPtPdNDs) with a Pd interior and a dendrite-like Pt exterior was achieved using a two-step preparation, mixing graphene and PdCl 4 2− first, then adding PtCl 4 2− and ethanol without any other solvent. The morphology, structure and composition of the thus-prepared GPtPdNDs were characterized by transmission electron microscopy (TEM), high resolution TEM, energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. Because no halide ions (refer in particular to Br - , I − ) or surfactant was involved in the synthesis, the prepared GPtPdNDs were directly modified onto a glassy carbon electrode and showed excellent electrocatalytic performance in methanol oxidation without any pretreatments. Moreover, with the special structure of PtPdNDs and the synergetic effects of Pt and Pd and the enhanced electron transfer by graphene, the GPtPdNDs composites exhibited higher electrocatalytic activity and better tolerance to Pt nanoparticles supported on graphene (GPtNPs) and Pt/C for methanol oxidation

  1. The system Pd-Fe-Ni-S at 900 and 725 degree C

    DEFF Research Database (Denmark)

    Makovicky, E.; Karup-Møller, Sven

    1995-01-01

    /Fe ratio in the melt changes regularly against that in mss with increasing S fugacity and Pd contents in these two phases. (Ni,Fe)(3+/-x)S-2 and Pd4S play important roles at 725 degrees C. The data offer an array of distribution coefficients and solubility values suitable for geological interpretations....

  2. Electrochemical reduction of O2 and NO on Ni, Pt and Au

    DEFF Research Database (Denmark)

    Kammer Hansen, Kent

    2008-01-01

    the reduction of oxygen. This implies that the triple-phase boundary (3PB) catalyses the reduction of oxygen but not the reduction of nitric oxide, as Au is a catalytic inactive metal. All the materials were more active towards oxidation than towards reduction that is evolution of oxygen or oxidation of nitric......The electrochemical reduction of oxygen and nitric oxide was studied using cyclic voltammetry on point electrodes of Ni, Pt and Au in the temperature range 400-600 degrees C. All the materials were more active towards the reduction of oxygen than towards the reduction of nitric oxide, except Pt...... at 400 degrees C. As a general trend it was observed that the activity of the materials towards the reduction of oxygen increases more than the activity of the materials towards the reduction of nitric oxide with increasing temperature. The Ni wire was covered with a layer of NiO. The NiO layer inhibits...

  3. Facile synthesis of hydrangea-like core-shell Pd@Pt/graphene composite as an efficient electrocatalyst for methanol oxidation

    Science.gov (United States)

    Xu, Shuhong; Li, Zhongshui; Lei, Fengling; Wang, Yanli; Xie, Yixin; Lin, Shen

    2017-12-01

    Core-shell palladium@platinum/graphene composite (denoted as Pd@Pt/GNs (PDDA)) was synthesized by successive reduction with formic acid as a reducing agent and poly(diallyldimethylammonium chloride) solution (PDDA) as a structure-directing agent at ambient temperature. The as-synthesized Pd@Pt/GNs (PDDA) was characterized by transmission electron microscopy (TEM), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The results indicate that hydrangea-like PtPd bimetallic nanoclusters on graphene (GNs) are formed with the aid of morphology control of PDDA. Especially, they are in a typical core-shell structure with Pd as core and Pt as shell, which are uniformly dispersed on the surface of GNs. Electrocatalytic tests show that Pd@Pt/GNs (PDDA) exhibits superior electrocatalytic activity for methanol oxidation (with the mass activities of 870.8 mA mg-1 Pt) in comparison with the commercial Pt/C and alloyed Pd-Pt/GNs (PDDA) catalysts owing to its unique Pd core Pt shell hydrangea-like structure and the synergistic effects between Pd@Pt and GNs.

  4. Effect of Catalyst Precursor and Its Pretreatment on the Amount of ß-Pd Hydride Phase and HDS Activity of Pd-Pt/Silica-Alumina

    Czech Academy of Sciences Publication Activity Database

    Vít, Zdeněk; Gulková, Daniela; Kaluža, Luděk; Boaro, M.

    2014-01-01

    Roč. 146, SI (2014), s. 213-220 ISSN 0926-3373. [International Conference on Environmental Catalysis /7./. Lyon, 02.09.2012-06.09.2012] R&D Projects: GA ČR GA104/09/0751; GA ČR GAP106/11/0902 Institutional support: RVO:67985858 Keywords : Pd-Pt catalyst * hydrodesulfurization * Pd hydride Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 7.435, year: 2014

  5. Temperature dependence of the electric field gradient in AgPd and AgPt alloys

    International Nuclear Information System (INIS)

    Krolas, K.

    1977-07-01

    The measurements of temperature dependence of the electric field gradient (EFG) on 111 Cd nuclei in AgPd and AgPt alloys were performed using the time dependent perturbed angular correlation method. The EFG caused by impurities distributed in further coordination shells decrease stronaer with increasing temperature than the EFG due to single impurity being the nearest neighbour of the probe atom. These results were explained assuming different modes of thermal vibrations of single impurity atoms and impurity complexes in silver host lattice. (author)

  6. Hydrolysis mechanism of (N, N) chelated cytotoxic Pt/Pd(II)-dichloro complexes: A theoretical approach

    Science.gov (United States)

    Mukherjee, Subhajit; Reddy B., Venkata P.; Mitra, Ishani; Linert, Wolfgang; Moi, Sankar Ch

    2017-06-01

    Two cytotoxic complexes cis-[Pt(MAMP)Cl2], 1 and cis-[Pd(MAMP)Cl2], 2 (where, MAMP = 2-[(Methylamino)methyl]pyridine) have been considered to explore their hydrolysis mechanism through Density Functional Theory. The stationary states on potential energy surfaces are optimized and characterized. Activation parameters and rate constants for hydrolysis of the complexes have been calculated in CPCM model and compared with that of renowned anticancer drugs. Second step is the rate-determining step with greater activation energy for both the complexes. Time Dependent Density Functional Theory is performed in order to understand the nature of electronic transition in the complexes.

  7. Ni-Pt multilayered nanowire arrays with enhanced coercivity and high remanence ratio.

    Science.gov (United States)

    Liang, Han-Pu; Guo, Yu-Guo; Hu, Jin-Song; Zhu, Chuan-Feng; Wan, Li-Jun; Bai, Chun-Li

    2005-05-02

    Highly ordered Ni-Pt multilayered nanowire arrays have been fabricated using a porous anodic aluminum oxide (AAO) template by pulse electrodeposition. The cylindrical Ni nanoparticles with different lengths and diameters in these arrays were characterized by transmission electron microscope (TEM) and alternating-gradient magnetometer (AGM) measurements. Magnetization measurements revealed that an array of such nanowires with 20-nm diameters has an enhanced coercivity (ca. 1169 Oe) and a high remanence ratio (ca. 0.96).

  8. Improving electromechanical output of IPMC by high surface area Pd-Pt electrodes and tailored ionomer membrane thickness

    Directory of Open Access Journals (Sweden)

    Viljar Palmre

    2014-04-01

    Full Text Available In this study, we attempt to improve the electromechanical performance of ionic polymer–metal composites (IPMCs by developing high surface area Pd-Pt electrodes and tailoring the ionomer membrane thickness. With proper electroless plating techniques, a high dispersion of palladium particles is achieved deep in the ionomer membrane, thereby increasing notably the interfacial surface area of electrodes. The membrane thickness is increased using 0.5 and 1 mm thick ionomer films. For comparison, IPMCs with the same ionomer membranes, but conventional Pt electrodes, are also prepared and studied. The electromechanical, mechanoelectrical, electrochemical and mechanical properties of different IPMCs are characterized and discussed. Scanning electron microscopy-energy dispersive X-ray (SEM-EDS is used to investigate the distribution of deposited electrode metals in the cross section of Pd-Pt IPMCs. Our experiments demonstrate that IPMCs assembled with millimeter thick ionomer membranes and newly developed Pd-Pt electrodes are superior in mechanoelectrical transduction, and show significantly higher blocking force compared to conventional type of IPMCs. The blocking forces of more than 0.3 N were measured at 4V DC input, exceeding the force output of typical Nafion® 117-based Pt IPMCs more than two orders of magnitude. The newly designed Pd-Pt IPMCs can be useful in more demanding applications, e.g., in biomimetic underwater robotics, where high stress and drag forces are encountered.

  9. Voltage Oscillations in a Polymer Electrolyte Membrane Fuel Cell with Pd-Pt/C and Pd/C Anodes.

    Science.gov (United States)

    Nogueira, Jéssica Alves; Varela, Hamilton

    2017-10-01

    Polymer electrolyte membrane fuel cells (PEMFC) fed with H 2 contaminated with CO may exhibit oscillatory behavior when operated galvanostatically. The self-organization of the anodic overpotential is interesting because it can be accompanied by an increase in the average performance. Herein we report experimental studies of voltage oscillations that emerge in a PEMFC equipped with a Pd/C or PdPt/C anode and fed with H 2 contaminated with CO (100 ppm). We used on-line mass spectrometry to investigate how the mass fragments associated with CO 2 and CO ( m / z 44 and 28, respectively) varied with the voltage oscillations. Overall, we observed that oscillations in the anodic overpotential are in phase with that of the CO and CO 2 signals. This fact is consistent with an autonomous adsorption-oxidation cyclic process. For both anodes, it has been observed that, in general, an increase in current density implies an increase in oscillatory frequency. By using CO stripping, we also discuss how the onset of CO oxidation is related to the maximum overpotential reached during a cycle, whereas the minimum overpotential can be associated with the catalytic activity of the electrode for H 2 oxidation.

  10. Direct ethanol fuel cell, CO and ethanol oxidation on core-shell C/Ni-Au-[Pt and (Pt- Ir)] catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, C.A.D.; Tremiliosi-Filho, G. [Universidade de Sao Paulo (IQSC/USP), Sao Carlos, SP (Brazil). Inst. de Quimica], Email: cesaraug@sc.usp.br; Kokoh, K.B.; Coutanceau, C.; Baranton, S. [Universite de Poitiers (France). Lab. de Catalyse en Chimie Organique (LACCO). Equipe Electrocatalyse

    2010-07-01

    In this paper presents to study of the Pt and Pt-Ir monolayer that were deposited on core-shell Ni-Au nanoparticles supported on carbon. Catalysts with the following molar ratios were prepared: Pt and Pt{sub 65}Ir{sub 35}, Pt{sub 75}Ir{sub 2}5, Pt{sub 80}Ir{sub 20} and Pt{sub 85}Ir{sub 15}. The means particle sizes were in the range of 2 - 6 nm for all catalysts. The electrochemical properties examined in the ethanol and CO oxidation by cyclic voltammetry, and In situ IR spectroscopy measurements (SPAIRS) enabled to determine intermediates and reaction products as a function of the metallic compositions of catalysts. All of the catalysts were tested as anodes of a single direct ethanol fuel cell (DEFC) tests in 1.0 M ethanol solution. As a result, higher power densities were obtained with the core-shell particles in comparison to those issued from the commercial catalyst (Pt-ETEK). Thus, the maximum power densities at 90 deg C for the different systems are: (i) commercial C/Pt catalyst (E-TEK): ca. 0.010 W cm{sup -2}, C/Ni-Au-(Pt{sub 85}Ir{sub 15}): ca. 0.013 W cm{sup -2} and C/Ni-Au-Pt: ca. 0.018 W cm{sup -2} (all core-shell systems were normalization by Pt load). As a result, the performance of the core-shell nanoparticles is much better than that produced for the commercial catalyst and the C/Ni-Au-Pt system showed the best performance. (author)

  11. Hollow Au@Pd and Au@Pt core-shell nanoparticles as electrocatalysts for ethanol oxidation reactions

    KAUST Repository

    Song, Hyon Min

    2012-09-27

    Hybrid alloys among gold, palladium and platinum become a new category of catalysts primarily due to their enhanced catalytic effects. Enhancement means not only their effectiveness, but also their uniqueness as catalysts for the reactions that individual metals may not catalyze. Here, preparation of hollow Au@Pd and Au@Pt core-shell nanoparticles (NPs) and their use as electrocatalysts are reported. Galvanic displacement with Ag NPs is used to obtain hollow NPs, and higher reduction potential of Au compared to Ag, Pd, and Pt helps to produce hollow Au cores first, followed by Pd or Pt shell growth. Continuous and highly crystalline shell growth was observed in Au@Pd core-shell NPs, but the sporadic and porous-like structure was observed in Au@Pt core-shell NPs. Along with hollow core-shell NPs, hollow porous Pt and hollow Au NPs are also prepared from Ag seed NPs. Twin boundaries which are typically observed in large size (>20 nm) Au NPs were not observed in hollow Au NPs. This absence is believed to be due to the role of the hollows, which significantly reduce the strain energy of edges where the two lattice planes meet. In ethanol oxidation reactions in alkaline medium, hollow Au@Pd core-shell NPs show highest current density in forward scan. Hollow Au@Pt core-shell NPs maintain better catalytic activities than metallic Pt, which is thought to be due to the better crystallinity of Pt shells as well as the alloy effect of Au cores. © 2012 The Royal Society of Chemistry.

  12. Recent advances in platinum monolayer electrocatalysts for oxygen reduction reaction: Scale-up synthesis, structure and activity of Pt shells on Pd cores

    International Nuclear Information System (INIS)

    Sasaki, K.; Wang, J.X.; Naohara, H.; Marinkovic, N.; More, K.; Inada, H.; Adzic, R.R.

    2010-01-01

    We have established a scale-up synthesis method to produce gram-quantities of Pt monolayer electrocatalysts. The core-shell structure of the Pt/Pd/C electrocatalyst has been verified using the HAADF-STEM Z-contrast images, STEM/EELS, and STEM/EDS line profile analysis. The atomic structure of this electrocatalyst and formation of a Pt monolayer on Pd nanoparticle surfaces were examined using in situ EXAFS. The Pt mass activity of the Pt/Pd/C electrocatalyst for ORR is considerably higher than that of commercial Pt/C electrocatalysts. The results with Pt monolayer electrocatalysts may significantly impact science of electrocatalysis and fuel-cell technology, as they have demonstrated an exceptionally effective way of using Pt that can resolve problems of other approaches, including electrocatalysts' inadequate activity and high Pt content.

  13. Hydrodechlorination of chlorobenzene on Ni and Ni-Pd catalysts modified by heteropolycompounds of the Keggin type

    Science.gov (United States)

    Navalikhina, M. D.; Kavalerskaya, N. E.; Lokteva, E. S.; Peristyi, A. A.; Golubina, E. V.; Lunin, V. V.

    2012-11-01

    Ni and Ni-Pd catalysts modified by heteropolycompounds (HPCs) of the Keggin type are shown to be active in the gas-phase hydrodechlorination of chlorobenzene. The dispersion of the metal and the degree of its interaction with the support are found to change upon the addition of HPCs. The activity of the modified catalysts changes depending on the HPCs' composition, benzene and cyclohexane being present in the products of hydrodechlorination. The addition of Pd as a second active metal is found to change both the activity and selectivity of the produced catalysts (with benzene as the sole product).

  14. Effects of Alloyed Metal on the Catalysis Activity of Pt for Ethanol Partial Oxidation: Adsorption and Dehydrogenation on Pt(3)M (M=Pt, Ru, Sn, Re, Rh, and Pd).

    Science.gov (United States)

    Xu, Zhen-Feng; Wang, Yixuan

    2011-10-27

    The adsorption and dehydrogenation reactions of ethanol over bimetallic clusters, Pt(3)M (M = Pt, Ru, Sn, Re, Rh, and Pd), have been extensively investigated with density functional theory. Both the α-hydrogen and hydroxyl adsorptions on Pt as well as on the alloyed transition metal M sites of PtM were considered as initial reaction steps. The adsorptions of ethanol on Pt and M sites of some PtM via the α-hydrogen were well established. Although the α-hydrogen adsorption on Pt site is weaker than the hydroxyl, the potential energy profiles show that the dehydrogenation via the α-hydrogen path has much lower energy barrier than that via the hydroxyl path. Generally for the α-hydrogen path the adsorption is a rate-determining-step because of rather low dehydrogenation barrier for the α-hydrogen adsorption complex (thermodynamic control), while the hydroxyl path is determined by its dehydrogenation step (kinetic control). The effects of alloyed metal on the catalysis activity of Pt for ethanol partial oxidation, including adsorption energy, energy barrier, electronic structure, and eventually rate constant were discussed. Among all of the alloyed metals only Sn enhances the rate constant of the dehydrogenation via the α-hydrogen path on the Pt site of Pt(3)Sn as compared with Pt alone, which interprets why the PtSn is the most active to the oxidation of ethanol.

  15. Pt-Ni/WC Alloy Nanorods Arrays as ORR Catalyst for PEM Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    Begum, Mahbuba; Yurukcu, Mesut; Yurtsever, Fatma; Ergul, Busra; Kariuki, Nancy; Myers, Deborah J.; Karabacak, Tansel

    2017-08-24

    Polymer electrolyte membrane fuel cells (PEMFCs) among the other types of fuel cell technology are attractive power sources, especially for electric vehicle applications. While significant progress and plausible prospects of PEMFCs have been achieved, there are still some challenges related to the performance, durability, and cost that need to be overcome to make them economically viable for widespread commercialization. Our strategy is to develop thin films of high-active and stable catalyst coated on vertically aligned nanorod arrays of conductive and stable support. In this work, we fabricated tungsten carbide (WC) nanorods as support and coated them with a platinum-nickel (Pt-Ni) alloy shell denoted as Pt-Ni/WC catalysts. The Pt- Ni/WC nanorods were deposited on glassy carbon disks as well as on silicon substrates for evaluation of their electrocatalytic oxygen reduction reaction (ORR) activity and physical properties. Cyclic voltammetry experiments using rotating disk electrode were performed in perchloric acid (0.1 M HClO4) electrolyte at room temperature to characterize the ORR activity and stability of Pt-Ni/WC nanorods catalysts. Scanning electron microscopy and X-ray diffraction techniques were utilized to study the morphology and crystallographic properties, respectively.

  16. Simulating Linear Sweep Voltammetry from First-Principles: Application to Electrochemical Oxidation of Water on Pt(111) and Pt3Ni(111)

    DEFF Research Database (Denmark)

    Viswanathan, Venkatasubramanian; Hansen, Heine Anton; Rossmeisl, Jan

    2012-01-01

    Cyclic voltammetry is a fundamental experimental method for characterizing adsorbates on electrochemical surfaces. We present a model for the electrochemical solid–liquid interface, and we simulate the linear sweep voltammogram of the electrochemical oxidation of H2O on Pt(111) and Pt3Ni(111...

  17. Spectral studies on sulfur poisoning of Pd/Mg{sub 6}Ni by NEXAFS and XPS

    Energy Technology Data Exchange (ETDEWEB)

    Yagi, S., E-mail: s-yagi@nucl.nagoya-u.ac.jp [Department of Quantum Engineering, School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Synchrotron Radiation Center, Hiroshima University, Kagamiyama, Higashi-Hiroshima 739-0046 (Japan); Nambu, M.; Tsukada, C.; Ogawa, S. [Department of Quantum Engineering, School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Kutluk, G.; Namatame, H.; Taniguchi, M. [Synchrotron Radiation Center, Hiroshima University, Kagamiyama, Higashi-Hiroshima 739-0046 (Japan)

    2013-02-15

    We have studied on the hydrogen storage materials based on Mg–Ni alloy and fabricated the sample constructed with the Pd thin layer (TL) on Mg{sub 6}Ni alloy substrate. The adsorption behavior of the dimethyl disulfide (DMS) molecules on the sample has been measured to reveal the sulfur poisoning of the Pd TL/Mg{sub 6}Ni by means of XPS and Sulfur K-edge NEXAFS techniques. The chemisorbed DMS, methanethiolate (MT) and atomic S have been observed on the surface. Especially, it is clear that some atomic S has been oxidized by air and detected the adsorbate of the SO{sub 3}{sup 2−} and SO{sub 4}{sup 2−} species. During exposure to the atmosphere, most of the adsorbed DMS and MT adsorbates desorb from the Pd TL surface. We thus conclude the Pd TL might be able to prevent the hydrogen storage materials from the sulfur poisoning.

  18. Spectral studies on sulfur poisoning of Pd/Mg6Ni by NEXAFS and XPS

    International Nuclear Information System (INIS)

    Yagi, S.; Nambu, M.; Tsukada, C.; Ogawa, S.; Kutluk, G.; Namatame, H.; Taniguchi, M.

    2013-01-01

    We have studied on the hydrogen storage materials based on Mg–Ni alloy and fabricated the sample constructed with the Pd thin layer (TL) on Mg 6 Ni alloy substrate. The adsorption behavior of the dimethyl disulfide (DMS) molecules on the sample has been measured to reveal the sulfur poisoning of the Pd TL/Mg 6 Ni by means of XPS and Sulfur K-edge NEXAFS techniques. The chemisorbed DMS, methanethiolate (MT) and atomic S have been observed on the surface. Especially, it is clear that some atomic S has been oxidized by air and detected the adsorbate of the SO 3 2− and SO 4 2− species. During exposure to the atmosphere, most of the adsorbed DMS and MT adsorbates desorb from the Pd TL surface. We thus conclude the Pd TL might be able to prevent the hydrogen storage materials from the sulfur poisoning.

  19. The Precious metals (Au, Ag, Pt, Pd, Rh adsorption on the Silicon – organic sorbents

    Directory of Open Access Journals (Sweden)

    G Burmaa

    2014-09-01

    Full Text Available Sorption activity of two types of Silicon-organic sorbents for the previous metals has been studied. A polymer – poly (3- silsesquioxanilpropylthiocarbamate - 3- silsesquioxanilpropylammonium which was obtained by the hydrolytic poly-condensation reaction and has been determined its physical, chemical characteristics and its sorption activity for the Ag(I, Au(III, Pt(IV, Pd(II, Rh(III. It has been found out that the sorbent shows high static sorption of Gold (III, Mercury (II at acidic condition. The second a net structured silicon-organic copolymer {SiO2*2[O1.5Si(CH23NHC5H4N}n was synthesized by hydrolytic co-poly-condensation reaction. It likely to react as an anionit that adsorbs chloro-complex anion of the Au (III, Pt(IV, Pd(II, Rh(III.DOI: http://dx.doi.org/10.5564/mjc.v12i0.167 Mongolian Journal of Chemistry Vol.12 2011: 29-34

  20. Reactivity to sodium tetrachloropalladate (Na-2[PdCl4]) compared to PdCl2 and NiCl2 in lymphocyte proliferation tests

    NARCIS (Netherlands)

    Muris, J.; Kleverlaan, C.J.; Feilzer, A.J.; Valentine-Thon, E.

    2009-01-01

    Background:  For patch testing, replacement of the commonly used palladium dichloride (PdCl2) by sodium tetrachloropalladate (Na2[PdCl4]) was recently demonstrated to improve test accuracy and show a significant correlation with nickel (Ni), supporting the concept of cross-reactivity between Pd and

  1. CO Sensing Performance of a Micro Thermoelectric Gas Sensor with AuPtPd/SnO2 Catalyst and Effects of a Double Catalyst Structure with Pt/?-Al2O3

    OpenAIRE

    Goto, Tomoyo; Itoh, Toshio; Akamatsu, Takafumi; Shin, Woosuck

    2015-01-01

    The CO sensing properties of a micro thermoelectric gas sensor (micro-TGS) with a double AuPtPd/SnO2 and Pt/α-Al2O3 catalyst were investigated. While several nanometer sized Pt and Pd particles were uniformly dispersed on SnO2, the Au particles were aggregated as particles measuring >10 nm in diameter. In situ diffuse reflectance Fourier transform Infrared spectroscopy (DRIFT) analysis of the catalyst showed a CO adsorption peak on Pt and Pd, but no clear peak corresponding to the interact...

  2. Gas Phase Fabrication of Pd-Ni Nanoparticle Arrays for Hydrogen Sensor Applications

    Directory of Open Access Journals (Sweden)

    Peng Xing

    2015-01-01

    Full Text Available Pd-Ni nanoparticles have been fabricated by gas aggregation process. The formation of Pd-Ni nano-alloys was confirmed by X-ray photoelectron spectroscopy measurements. By depositing Pd-Ni nanoparticles on the interdigital electrodes, quantum conductance-based hydrogen sensors were fabricated. The Ni content in the nanoparticle showed an obvious effect on the hydrogen response behavior corresponding to the conductance change of the nanoparticle film. Three typical response regions with different conductance-hydrogen pressure correlations were observed. It was found that the α-β phase transition region of palladium hydride moves to significant higher hydrogen pressure with the addition of nickel element, which greatly enhance the hydrogen sensing performance of the nanoparticle film.

  3. Role of Hydrogen and Oxygen Activation over Pt and Pd-Doped Composites for Catalytic Hydrogen Combustion.

    Science.gov (United States)

    Singh, Satyapaul A; Vishwanath, Karan; Madras, Giridhar

    2017-06-14

    Removal of excess amount of hydrogen in a catalytic route is a safety measure to be implemented in fuel cell technologies and in nuclear power plants. Hydrogen and oxygen activation are crucial steps for hydrogen combustion that can be achieved by modifying supports with suitable noble metals. In the present study, Pt- and Pd-substituted Co 3 O 4 -ZrO 2 (CZ) were synthesized using PEG-assisted sonochemical synthesis. Ionic states of Pt and Pd in CZ supports were analyzed by X-ray photoelectron spectroscopy. Pd and Pt improved H 2 and O 2 activation extensively, which reduced the temperature of 50% conversion (T 50% ) to 33 °C compared with the support (CZ). The activation energy of PdCZ catalyst was decreased by more than 2 folds (13.4 ± 1.2 kJ mol -1 ) compared with CZ (34.3 ± 2.3 kJ mol -1 ). The effect of oxygen vacancies in the reaction mechanism is found to be insignificant with Pt- and Pd-substituted CZ supports. However, oxygen vacancies play an important role when CZ alone was used as catalyst. The importance of hydrogen and oxygen activation as well as the oxygen vacancies in mechanism was studied by H 2 -TPD, H 2 -TPR, and in situ FTIR spectroscopy.

  4. Electric-field tunable spin diode FMR in patterned PMN-PT/NiFe structures

    Energy Technology Data Exchange (ETDEWEB)

    Ziętek, Slawomir, E-mail: zietek@agh.edu.pl; Skowroński, Witold; Stobiecki, Tomasz [AGH University of Science and Technology, Department of Electronics, Al. Mickiewicza 30, 30-059 Kraków (Poland); Ogrodnik, Piotr, E-mail: piotrogr@if.pw.edu.pl [AGH University of Science and Technology, Department of Electronics, Al. Mickiewicza 30, 30-059 Kraków (Poland); Faculty of Physics, Warsaw University of Technology, ul. Koszykowa 75, 00-662 Warszawa (Poland); Stobiecki, Feliks [Institute of Molecular Physics, Polish Academy of Sciences, ul. Smoluchowskiego 17, 60-179 Poznań (Poland); Dijken, Sebastiaan van [NanoSpin, Department of Applied Physics, Aalto University School of Science, P.O. Box 15100, FI-00076 Aalto (Finland); Barnaś, Józef [Faculty of Physics, Adam Mickiewicz University, ul. Umultowska 85, 61-614 Poznań (Poland); Institute of Molecular Physics, Polish Academy of Sciences, ul. Smoluchowskiego 17, 60-179 Poznań (Poland)

    2016-08-15

    Dynamic properties of NiFe thin films on PMN-PT piezoelectric substrate are investigated using the spin-diode method. Ferromagnetic resonance (FMR) spectra of microstrips with varying width are measured as a function of magnetic field and frequency. The FMR frequency is shown to depend on the electric field applied across the substrate, which induces strain in the NiFe layer. Electric field tunability of up to 100 MHz per 1 kV/cm is achieved. An analytical model based on total energy minimization and the Landau-Lifshitz-Gilbert equation, taking into account the magnetostriction effect, is used to explain the measured dynamics. Based on this model, conditions for optimal electric-field tunable spin diode FMR in patterned NiFe/PMN-PT structures are derived.

  5. 3D-nanoarchitectured Pd/Ni catalysts prepared by atomic layer deposition for the electrooxidation of formic acid

    Directory of Open Access Journals (Sweden)

    Loïc Assaud

    2014-02-01

    Full Text Available Three-dimensionally (3D nanoarchitectured palladium/nickel (Pd/Ni catalysts, which were prepared by atomic layer deposition (ALD on high-aspect-ratio nanoporous alumina templates are investigated with regard to the electrooxidation of formic acid in an acidic medium (0.5 M H2SO4. Both deposition processes, Ni and Pd, with various mass content ratios have been continuously monitored by using a quartz crystal microbalance. The morphology of the Pd/Ni systems has been studied by electron microscopy and shows a homogeneous deposition of granularly structured Pd onto the Ni substrate. X-ray diffraction analysis performed on Ni and NiO substrates revealed an amorphous structure, while the Pd coating crystallized into a fcc lattice with a preferential orientation along the [220]-direction. Surface chemistry analysis by X-ray photoelectron spectroscopy showed both metallic and oxide contributions for the Ni and Pd deposits. Cyclic voltammetry of the Pd/Ni nanocatalysts revealed that the electrooxidation of HCOOH proceeds through the direct dehydrogenation mechanism with the formation of active intermediates. High catalytic activities are measured for low masses of Pd coatings that were generated by a low number of ALD cycles, probably because of the cluster size effect, electronic interactions between Pd and Ni, or diffusion effects.

  6. Synergistically Enhanced Electrochemical Performance of Ni3S4-PtX (X = Fe, Ni) Heteronanorods as Heterogeneous Catalysts in Dye-Sensitized Solar Cells.

    Science.gov (United States)

    Huang, Shoushuang; Ma, Dui; Hu, ZhangJun; He, Qingquan; Zai, Jiantao; Chen, Dayong; Sun, Huai; Chen, Zhiwen; Qiao, Qiquan; Wu, Minghong; Qian, Xuefeng

    2017-08-23

    Platinum (Pt)-based alloys are considerably promising electrocatalysts for the reduction of I - /I 3 - and Co 2+ /Co 3+ redox couples in dye-sensitized solar cells (DSSCs). However, it is still challenging to minimize the dosage of Pt to achieve comparable or even higher catalytic efficiency. Here, by taking full advantages of the Mott-Schottky (M-S) effect at the metal-semiconductor interface, we successfully strategize a low-Pt-based M-S catalyst with enhanced electrocatalytic performance and stability for the large-scale application of DSSCs. The optimized M-S electrocatalyst of Ni 3 S 4 -Pt 2 X 1 (X = Fe, Ni) heteronanorods is constructed by rationally controlling the ratio of Pt to transition metal in the hybrids. It was found that the electrons transferred from Ni 3 S 4 to Pt 2 X 1 at their interface under the Mott-Schottky effect result in the concentration of electrons onto Pt 2 X 1 domains, which subsequently accelerates the regeneration of both I - /I 3 - and Co 2+ /Co 3+ redox shuttles in DSSCs. As a result, the DSSC with Ni 3 S 4 -Pt 2 Fe 1 manifests an impressive power conversion efficiency (PCE) of 8.79% and 5.56% for iodine and cobalt-based electrolyte under AM1.5G illumination, respectively. These PCEs are obviously superior over those with Ni 3 S 4 -Pt, PtFe, Ni 3 S 4 , and pristine Pt electrodes. The strategy reported here is able to be further expanded to fabricate other low-Pt-alloyed M-S catalysts for wider applications in the fields of photocatalysis, water splitting, and heterojunction solar cells.

  7. Pt, PtCo and PtNi electrocatalysts prepared with mechanical alloying for oxygen reduction reaction in alkaline medium; Electrocatalizadores de Pt, PtCo y PtNi preparados por aleado mecanico para la reaccion de reduccion de oxigeno en medio alcalino

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Contreras, M.A.; Fernandez-Valverde, S.M. [Instituto Nacional de Investigaciones Nucleares, Ocoyoacac, Estado de Mexico (Mexico)]. E-mail: miguel.garcia@inin.gob.mx; Vargas-Garcia, J.R. [ESIQIE-IPN, Mexico D.F. (Mexico

    2009-09-15

    Pt, PtCo and PtNi electrocatalysts were prepared using mechanical alloying and their electrocatalytic activity was investigated for oxygen reduction reaction (ORR) in KOH 0.5 M using cyclic voltametry and rotary disc electrode (RDE) techniques. The electrocatalysts were characterized using x-ray diffraction, sweep electron microscopy, dispersive x-ray transmission and chemical analysis. The physical characterization indicated that all the electrocatalysts are alloys formed by agglomerated particles composed of nanocrystals. The chemical analysis showed the presence of iron in the alloys. For the electrocatalytic evaluation, polarization curves and Koutecky-Levich and Tafel graphs were obtained to determine the kinetic parameters of the electrocatalysts in the study. With the same experimental conditions, the PtCo presented better electrocatalytic performance with a higher exchange current density. [Spanish] Se prepararon electrocatalizadores de Pt, PtCo y PtNi por aleado mecanico y se investigo su actividad electrocatalitica para la reaccion de reduccion de oxigeno (RRO) en KOH 0.5 M utilizando las tecnicas de Voltametria ciclica y Electrodo de Disco Rotatorio. Los electrocatalizadores se caracterizaron por difraccion de rayos X, Microscopia electronica de Barrido, de Transmision y analisis quimico por dispersion de rayos X. La caracterizacion fisica indico que todos los electrocatalizadores son aleaciones formadas de particulas aglomeradas, compuestas de nanocristales. El analisis quimico mostro la presencia de hierro en las aleaciones. Para la evaluacion electrocatalitica se obtuvieron curvas de polarizacion, graficas de Koutecky-Levich y de Tafel para determinar los parametros cineticos de los electrocatalizadores en estudio. En las mismas condiciones experimentales, el PtCo presento el mejor desempeno electrocatalitico con la densidad de corriente de intercambio mas alta.

  8. Supersaturation-controlled surface structure evolution of Pd@Pt core-shell nanocrystals: enhancement of the ORR activity at a sub-10 nm scale

    Science.gov (United States)

    Qi, Kun; Zheng, Weitao; Cui, Xiaoqiang

    2016-01-01

    Here, we designed and implemented a facile strategy for controlling the surface evolution of Pd@Pt core-shell nanostructures by simply adjusting the volume of OH- to control the reducing ability of ascorbic acid and finally manipulating the supersaturation in the reaction system. The surface structure of the obtained Pd@Pt bimetallic nanocrystals transformed from a Pt {111} facet-exposed island shell to a conformal Pt {100} facet-exposed shell by increasing the pH value. The as-prepared well aligned Pd@Pt core-island shell nanocubes present both significantly enhanced electrocatalytic activity and favorable long-term stability toward the oxygen reduction reaction in alkaline media.Here, we designed and implemented a facile strategy for controlling the surface evolution of Pd@Pt core-shell nanostructures by simply adjusting the volume of OH- to control the reducing ability of ascorbic acid and finally manipulating the supersaturation in the reaction system. The surface structure of the obtained Pd@Pt bimetallic nanocrystals transformed from a Pt {111} facet-exposed island shell to a conformal Pt {100} facet-exposed shell by increasing the pH value. The as-prepared well aligned Pd@Pt core-island shell nanocubes present both significantly enhanced electrocatalytic activity and favorable long-term stability toward the oxygen reduction reaction in alkaline media. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr07940c

  9. Nano-engineered intrapores in nanoparticles of PtNi networks for increased oxygen reduction reaction activity

    Science.gov (United States)

    Ding, Jieting; Ji, Shan; Wang, Hui; Key, Julian; Brett, Dan J. L.; Wang, Rongfang

    2018-01-01

    Network-like metallic alloys of solid nanoparticles have been frequently reported as promising electrocatalysts for fuel cells. The three-dimensional structure of such networks is rich in pores in the form of voids between nanoparticles, which collectively expose a large surface area for catalytic activity. Herein, we present a novel solution to this problem using a precursor comprising a flocculent core-shell PtNi@Ni to produce PtNi network catalysts with nanoparticle intraporosity after carefully controlled electrochemical dealloying. Physical characterization shows a hierarchical level of nanoporosity (intrapores within nanoparticles and pores between them) evolves during the controlled electrochemical dealloying, and that a Pt-rich surface also forms after 22 cycles of Ni leaching. In ORR cycling, the PtNi networks gain 4-fold activity in both jECSA and jmass over a state of the art Pt/C electrocatalyst, and also significantly exceed previously reported PtNi networks. In ORR degradation tests, the PtNi networks also proved stable, dropping by 30.4% and 62.6% in jECSA and jmass respectively. The enhanced performance of the catalyst is evident, and we also propose that the presented synthesis procedure can be generally applied to developing other metallic networks.

  10. Study of the Isothermal Oxidation Process and Phase Transformations in B2-(Ni,PtAl/RENE-N5 System

    Directory of Open Access Journals (Sweden)

    Luis Alberto Cáceres-Díaz

    2016-09-01

    Full Text Available Changes in composition, crystal structure and phase transformations of B2-(Ni,PtAl coatings upon isothermal oxidation experiments (natural and scale free oxidation at 1100 °C, as a function of time beyond their martensitic transformation, are reported. Specifically, the analysis of lattice parameter and composition are performed to identify changes in the B2-(Ni,PtAl phase upon the chemically-driven L10-(Ni,PtAl and L12-(Ni,Pt3Al transformations. The B2-(Ni,PtAl phase was found to disorder and transform the martensite during the heat treatments for both oxidation experiments at approximately 36.3 and 40.9 at. % of Al, 47.7 and 42.9 at. % of Ni, 6.2 and 8.5 at. % of Pt, 4.2 and 2.9 at. % of Cr and 4.4 and 3.8 at. % of Co. The lattice constant and the long-range order parameter of the B2-(Ni,PtAl phase decreased linearly as a function of the elemental content irrespective of the nature of the oxidation experiments.

  11. Effects of recrystallization annealing on mechanical properties of cold-rolled PdNi5 wires

    Directory of Open Access Journals (Sweden)

    Aleksandra Ivanović

    2016-03-01

    Full Text Available The aim of this investigation was to determine the influence of the recrystallization temperature and recrystallization time on the microstructure and mechanical properties of the PdNi5 alloy subjected to cold deformation in the process of rolling at a constant deformation degree. The samples of PdNi5 alloy were recrystallization annealed within the temperature range of 200-1000ºC and annealing time range of 20-45 min after cold rolling with deformation degree of 97%. The tensile test was carried out using universal material testing machine. The hardness was also measured on the combined device for measuring Vickers and Brinell hardness. Metallographic observations were performed on an optical microscope. The analysis of the results of investigations regarding the microstructural changes and corresponding mechanical properties of cold-rolled PdNi5 strips shows that annealing temperature of 500ºC was sufficient to activate the energy for various recrystallization processes causing a change in the mechanical properties of cold-rolled PdNi5 strips. The annealing time, at constant annealing temperature, almost did not affect a recrystallization temperature and the mechanical properties of the cold-rolled PdNi5 strips.

  12. Transformation of sodium bicarbonate and CO2 into sodium formate over NiPd nanoparticle catalyst

    Science.gov (United States)

    Wang, Mengnan; Zhang, Jiaguang; Yan, Ning

    2013-01-01

    The present research systematically investigated, for the first time, the transformation of sodium bicarbonate and CO2 into sodium formate over a series of Ni based metal nanoparticles (NPs). Ni NPs and eight NiM (M stands for a second metal) NPs were prepared by a facile wet chemical process and then their catalytic performance were evaluated in sodium bicarbonate hydrogenation. Bimetallic NiPd NPs with a composition of 7:3 were found to be superior for this reaction, which are more active than both pure Ni and Pd NPs. Hot filtration experiment suggested the NPs to be the truly catalytic active species and kinetic analysis indicated the reaction mechanism to be different than most homogeneous catalysts. The enhanced activity of the bimetallic nanoparticles may be attributed to their smaller size and improved stability. PMID:24790945

  13. Transformation of Sodium Bicarbonate and CO2 into Sodium Formate over NiPd Nanoparticle Catalyst

    Science.gov (United States)

    Wang, Mengnan; Zhang, Jiaguang; Yan, Ning

    2013-09-01

    The present research systematically investigated, for the first time, the transformation of sodium bicarbonate and CO2 into sodium formate over a series of Ni based metal nanoparticles (NPs). Ni NPs and eight NiM (M stands for a second metal) NPs were prepared by a facile wet chemical process and then their catalytic performance were evaluated in sodium bicarbonate hydrogenation. Bimetallic NiPd NPs with a composition of 7:3 were found to be superior for this reaction, which are more active than both pure Ni and Pd NPs. Hot filtration experiment suggested the NPs to be the truly catalytic active species and kinetic analysis indicated the reaction mechanism to be different than most homogeneous catalysts. The enhanced activity of the bimetallic nanoparticles may be attributed to their smaller size and improved stability.

  14. Transformation of sodium bicarbonate and CO2 into sodium formate over NiPd nanoparticle catalyst.

    Science.gov (United States)

    Wang, Mengnan; Zhang, Jiaguang; Yan, Ning

    2013-01-01

    The present research systematically investigated, for the first time, the transformation of sodium bicarbonate and CO2 into sodium formate over a series of Ni based metal nanoparticles (NPs). Ni NPs and eight NiM (M stands for a second metal) NPs were prepared by a facile wet chemical process and then their catalytic performance were evaluated in sodium bicarbonate hydrogenation. Bimetallic NiPd NPs with a composition of 7:3 were found to be superior for this reaction, which are more active than both pure Ni and Pd NPs. Hot filtration experiment suggested the NPs to be the truly catalytic active species and kinetic analysis indicated the reaction mechanism to be different than most homogeneous catalysts. The enhanced activity of the bimetallic nanoparticles may be attributed to their smaller size and improved stability.

  15. Transformation of Sodium Bicarbonate and CO2 into Sodium Formate over NiPd Nanoparticle Catalyst

    Directory of Open Access Journals (Sweden)

    Mengnan eWang

    2013-09-01

    Full Text Available The present research systematically investigated, for the first time, the transformation of sodium bicarbonate and CO2 into sodium formate over a series of Ni based metal nanoparticles (NPs. Ni NPs and eight NiM (M stands for a second metal NPs were prepared by a facile wet chemical process and then their catalytic performance were evaluated in sodium bicarbonate hydrogenation. Bimetallic NiPd NPs with a composition of 7:3 were found to be superior for this reaction, which are more active than both pure Ni and Pd NPs. Hot filtration experiment suggested the NPs to be the truly catalytic active species and kinetic analysis indicated the reaction mechanism to be different than most homogeneous catalysts. The enhanced activity of the bimetallic nanoparticles may be attributed to their smaller size and improved stability.

  16. Room temperature hydrogen generation from hydrolysis of ammonia-borane over an efficient NiAgPd/C catalyst

    KAUST Repository

    Hu, Lei

    2014-12-01

    NiAgPd nanoparticles are successfully synthesized by in-situ reduction of Ni, Ag and Pd salts on the surface of carbon. Their catalytic activity was examined in ammonia borane (NH3BH3) hydrolysis to generate hydrogen gas. This nanomaterial exhibits a higher catalytic activity than those of monometallic and bimetallic counterparts and a stoichiometric amount of hydrogen was produced at a high generation rate. Hydrogen production rates were investigated in different concentrations of NH3BH3 solutions, including in the borates saturated solution, showing little influence of the concentrations on the reaction rates. The hydrogen production rate can reach 3.6-3.8 mol H2 molcat -1 min-1 at room temperature (21 °C). The activation energy and TOF value are 38.36 kJ/mol and 93.8 mol H2 molcat -1 min-1, respectively, comparable to those of Pt based catalysts. This nanomaterial catalyst also exhibits excellent chemical stability, and no significant morphology change was observed from TEM after the reaction. Using this catalyst for continuously hydrogen generation, the hydrogen production rate can be kept after generating 6.2 L hydrogen with over 10,000 turnovers and a TOF value of 90.3 mol H2 molcat -1 min-1.

  17. Oxidation of Ni(Pt)Si by molecular vs. atomic oxygen

    International Nuclear Information System (INIS)

    Manandhar, Sudha; Copp, Brian; Kelber, J.A.

    2008-01-01

    X-ray photoelectron spectroscopy (XPS) has been used to characterize the oxidation of a clean Ni(Pt)Si surface under two distinct conditions: exposure to a mixed flux of atomic and molecular oxygen (O + O 2 ; P O+O 2 = 5 x 10 -6 Torr) and pure molecular oxygen (O 2 ; P O 2 = 10 -5 Torr) at ambient temperatures. Formation of the clean, stoichiometric (nickel monosilicide) phase under vacuum conditions results in the formation of a surface layer enriched in PtSi. Oxidation of this surface in the presence of atomic oxygen initially results in formation of a silicon oxide overlayer. At higher exposures, kinetically limited oxidation of Pt results in Pt silicate formation. No passivation of oxygen uptake of the sample is observed for total O + O 2 exposure 4 L, at which point the average oxide/silicate overlayer thickness is 23 (3) A (uncertainty in the last digit in parentheses). In contrast, exposure of the clean Ni(Pt)Si surface to molecular oxygen only (maximum exposure: 5 x 10 5 L) results in slow growth of a silicon oxide overlayer, without silicate formation, and eventual passivation at a total average oxide thickness of 8(1) A, compared to a oxide average thickness of 17(2) A (no silicate formation) for the as-received sample (i.e., exposed to ambient.) The aggressive silicon oxidation by atomic oxygen, results in Ni-rich silicide formation in the substrate and the kinetically limited oxidation of the Pt

  18. CO Sensing Performance of a Micro Thermoelectric Gas Sensor with AuPtPd/SnO₂ Catalyst and Effects of a Double Catalyst Structure with Pt/α-Al₂O₃.

    Science.gov (United States)

    Goto, Tomoyo; Itoh, Toshio; Akamatsu, Takafumi; Shin, Woosuck

    2015-12-15

    The CO sensing properties of a micro thermoelectric gas sensor (micro-TGS) with a double AuPtPd/SnO₂ and Pt/α-Al₂O₃ catalyst were investigated. While several nanometer sized Pt and Pd particles were uniformly dispersed on SnO₂, the Au particles were aggregated as particles measuring >10 nm in diameter. In situ diffuse reflectance Fourier transform Infrared spectroscopy (DRIFT) analysis of the catalyst showed a CO adsorption peak on Pt and Pd, but no clear peak corresponding to the interaction between CO and Au was detected. Up to 200 °C, CO combustion was more temperature dependent than that of H₂, while H₂ combustion was activated by repeated exposure to H₂ gas during the periodic gas test. Selective CO sensing of the micro-TGS against H₂ was attempted using a double catalyst structure with 0.3-30 wt% Pt/α-Al₂O₃ as a counterpart combustion catalyst. The sensor output of the micro-TGS decreased with increasing Pt content in the Pt/α-Al₂O₃ catalyst, by cancelling out the combustion heat from the AuPtPd/SnO₂ catalyst. In addition, the AuPtPd/SnO₂ and 0.3 wt% Pt/α-Al₂O₃ double catalyst sensor showed good and selective CO detection. We therefore demonstrated that our micro-TGS with double catalyst structure is useful for controlling the gas selectivity of CO against H₂.

  19. PtM/C (M = Sn, Ru, Pd, W) based anode direct ethanol-PEMFCs: Structural characteristics and cell performance

    Energy Technology Data Exchange (ETDEWEB)

    Tsiakaras, P.E. [Department of Mechanical Engineering, School of Engineering, University of Thessaly, Pedion Areos, 38334 Volos (Greece)

    2007-09-19

    In the present work, the role of the structural characteristics of Pt-based catalysts on the single direct ethanol proton exchange membrane fuel cell (PEMFC) performance is examined. Several PtM/C (M = Sn, Ru, Pd, W) catalysts were characterized by means of transmission electron microscopy (TEM) and X-ray diffraction (XRD) and then evaluated as anode catalysts in single direct ethanol fuel cells. XRD spectra showed that Pt lattice parameter decreases with the addition of Ru or Pd and increases with the addition of Sn or W. According to the obtained experimental results, PtSn catalysts presented better electrocatalytic activity towards ethanol electro-oxidation. Based on these results, PtSn/C catalysts with different Pt/Sn atomic ratio were tested and compared. The maximum power density values obtained were correlated with the structural characteristics of the catalysts. A volcano type behaviour between the fuel cell maximum power density and the corresponding atomic percentage of Sn (Sn%) was observed. It was also observed that Sn% affects almost linearly the Pt{sub x}Sn{sub y} catalysts' lattice parameter. (author)

  20. In Situ Neutron Diffraction Study of NiTi-21Pt High-Temperature Shape Memory Alloys

    Science.gov (United States)

    Benafan, O.; Gaydosh, D. J.; Noebe, R. D.; Qiu, S.; Vaidyanathan, R.

    2016-12-01

    In situ neutron diffraction was used to investigate the microstructural features of stoichiometric and Ti-rich NiTiPt high-temperature shape memory alloys with target compositions of Ni29Ti50Pt21 and Ni28.5Ti50.5Pt21 (in atomic percent), respectively. The alloys' isothermal and thermomechanical properties (i.e., moduli, thermal expansion, transformation strains, and dimensional stability) were correlated to the lattice strains, volume-averaged elastic moduli, and textures as determined by neutron diffraction. In addition, the unique aspects of this technique when applied to martensitic transformations in shape memory alloys are highlighted throughout the paper.

  1. Facile and Rapid Synthesis of Ultrafine PtPd Bimetallic Nanoparticles and Their High Performance toward Methanol Electrooxidation

    Directory of Open Access Journals (Sweden)

    Tiantian Xia

    2014-01-01

    Full Text Available Uniform and sub-10 nm size bimetallic PtPd nanoparticles (NPs have been synthesized via a simple and facile method without using any surfactants at an ambient temperature. As a green and clean reductive agent, ascorbic acid (AA was employed for the coreduction of K2PtCl4 and K2PdCl4 in aqueous solution. The morphology, composition, and structure of PtPd NPs had been characterized by transmission electron microscopy (TEM, field emission high resolution transmission electron microscopy (FE-HRTEM, energy dispersive spectroscopy (EDS, X-ray diffraction (XRD, and X-ray photoelectron spectroscope (XPS. Comparing with both the monometallic Pt and Pd, the as-prepared alloy nanoparticles show superior electrocatalytic activity and better tolerance against poisoning by intermediates generated during methanol electrooxidation, which makes them a promising electrocatalysts for direct methanol fuel cells (DMFCs. Meanwhile, the green and simple approach could be easily extended to the manufacture of bimetallic or trimetallic alloy nanomaterials.

  2. Reduction of NO by Hydrogen versus Reduction by CO over Pt, Pd and Rh Clusters in NaX Zeolite

    Czech Academy of Sciences Publication Activity Database

    Nováková, Jana

    2001-01-01

    Roč. 30, - (2001), s. 445-457 ISSN 0926-3373 R&D Projects: GA AV ČR IAA4040710 Institutional research plan: CEZ:AV0Z4040901 Keywords : Pt, Pd, Rh in NaX * NO decomposition * CO+NO Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.643, year: 2001

  3. Crystal structure and physical properties of new Ca{sub 2}TGe{sub 3} (T = Pd and Pt) germanides

    Energy Technology Data Exchange (ETDEWEB)

    Klimczuk, T., E-mail: tomasz.klimczuk@pg.gda.pl [Faculty of Applied Physics and Mathematics, Gdansk University of Technology, Narutowicza 11/12, 80–233 Gdansk (Poland); Xie, Weiwei [Department of Chemistry, Princeton University, Princeton, NJ 08544 (United States); Winiarski, M.J.; Kozioł, R.; Litzbarski, L.S. [Faculty of Applied Physics and Mathematics, Gdansk University of Technology, Narutowicza 11/12, 80–233 Gdansk (Poland); Luo, Huixia; Cava, R.J. [Department of Chemistry, Princeton University, Princeton, NJ 08544 (United States)

    2016-11-15

    The crystallographic, electronic transport and thermal properties of Ca{sub 2}PdGe{sub 3} and Ca{sub 2}PtGe{sub 3} are reported. The compounds crystalize in an ordered variant of the AlB{sub 2} crystal structure, in space group P6/mmm, with the lattice parameters a = 8.4876(4) Å/8.4503(5) Å and c = 4.1911(3) Å/4.2302(3) Å for Ca{sub 2}PdGe{sub 3} and Ca{sub 2}PtGe{sub 3}, respectively. The resistivity data exhibit metallic behavior with residual-resistivity-ratios (RRR) of 13 for Ca{sub 2}PdGe{sub 3} and 6.5 for Ca{sub 2}PtGe{sub 3}. No superconducting transition is observed down to 0.4 K. Specific heat studies reveal similar values of the Debye temperatures and Sommerfeld coefficients: Θ{sub D} = 298 K, γ = 4.1 mJ mol{sup −1} K{sup −2} and Θ{sub D} = 305 K, γ = 3.2 mJ mol{sup −1} K{sup −2} for Ca{sub 2}PdGe{sub 3} and Ca{sub 2}PtGe{sub 3}, respectively. The low value of γ is in agreement with the electronic structure calculations.

  4. Transformation of Sodium Bicarbonate and CO2 into Sodium Formate over NiPd Nanoparticle Catalyst

    OpenAIRE

    Mengnan eWang; Jiaguang eZhang; Ning eYan

    2013-01-01

    The present research systematically investigated, for the first time, the transformation of sodium bicarbonate and CO2 into sodium formate over a series of Ni based metal nanoparticles (NPs). Ni NPs and eight NiM (M stands for a second metal) NPs were prepared by a facile wet chemical process and then their catalytic performance were evaluated in sodium bicarbonate hydrogenation. Bimetallic NiPd NPs with a composition of 7:3 were found to be superior for this reaction, which are more active t...

  5. Tuning the interface of Ni@Ni(OH)2/Pd/rGO catalyst to enhance hydrogen evolution activity and stability

    Science.gov (United States)

    Deng, Zihua; Wang, Jun; Nie, Yao; Wei, Zidong

    2017-06-01

    The interface engineering is vital to rational design and synthesis of the heterogeneous catalyst for high-performance electrochemically applications. The smart and elaborate architecture design offers several remarkable advantages, including good dispersion, more exposed active site and good electrical conductivity. We report a trace Pd induced formation of Ni@Ni(OH)2/Pd catalyst on reduced graphene oxides (rGO) by hydrothermal synthesis. We found that the presence of palladium seeds can promote the grain refinement and dispersion of the catalyst. The HRTEM results revealed that most of Ni@Ni(OH)2/Pd with a mean size of ∼10 nm are uniformly dispersed on the rGO sheets, with Pd particles and Ni@Ni(OH)2 balls located side by side. DFT calculations further confirmed a strong interaction existed in the interfaces, which leads to a stable Ni@Ni(OH)2/Pd/rGO morphology. By tailoring Ni@Ni(OH)2-Pd-rGO interfaces of the catalyst, the catalyst gives a current density of 10 mA cm-2 at a small over-potential of 76 mV and exhibits an excellent stability for the hydrogen evolution reaction in an alkaline environments.

  6. Estimation of Transformation Temperatures in Ti-Ni-Pd Shape Memory Alloys

    Science.gov (United States)

    Narayana, P. L.; Kim, Seong-Woong; Hong, Jae-Keun; Reddy, N. S.; Yeom, Jong-Taek

    2018-03-01

    The present study focused on estimating the complex nonlinear relationship between the composition and phase transformation temperatures of Ti-Ni-Pd shape memory alloys by artificial neural networks (ANN). The ANN models were developed by using the experimental data of Ti-Ni-Pd alloys. It was found that the predictions are in good agreement with the trained and unseen test data of existing alloys. The developed model was able to simulate new virtual alloys to quantitatively estimate the effect of Ti, Ni, and Pd on transformation temperatures. The transformation temperature behavior of these virtual alloys is validated by conducting new experiments on the Ti-rich thin film that was deposited using multi target sputtering equipment. The transformation behavior of the film was measured by varying the composition with the help of aging treatment. The predicted trend of transformational temperatures was explained with the help of experimental results.

  7. Control of the composition of Pt-Ni electrocatalysts in surfactant-free synthesis using neat N-formylpiperidine.

    Science.gov (United States)

    Zhang, Na; Tsao, Kai-Chieh; Pan, Yung-Tin; Yang, Hong

    2016-02-07

    This paper describes the facile and surfactant-free synthesis of faceted Pt-Ni alloy nanoparticle electrocatalysts using neat N-formylpiperidine as a new type of solvent. Unlike the widely-used colloidal synthesis based on long-carbon chain surfactants, nanoparticles made in neat N-formylpiperidine possess a directly accessible surface for electrocatalytic reactions, making it a very attractive alternative solvent. The area-specific oxygen reduction reaction (ORR) activity is much higher than the commercial Pt/C catalyst reference and reaches a maximum of 1.12 mA cm(-2) for the Pt-Ni alloy nanoparticles. We observed that the freshly formed Pt-Ni alloy could have controllable bulk and near surface compositions under the same initial reaction conditions and precursor ratio. The change in the composition could be attributed to the effect of CO on the formation of uniform nuclei at the initial stage, and a different deposition rate between Pt and Ni metals during the growth. The well-defined Pt-Ni nanoparticle catalysts show strong composition-dependent catalytic behavior in ORR, highlighting the important role of controlling the growth kinetics in the preparation of active Pt-Ni ORR catalysts.

  8. SÍNTESIS Y CARACTERIZACIÓN DE CATALIZADORES Ni/MCM-22, Pt/MCM-22 Y Pt-Ni/MCM-22

    Directory of Open Access Journals (Sweden)

    Everton R.F. dos Santos

    2012-01-01

    Full Text Available El objetivo de este estudio fue producir la zeolita MCM-22 y, a partir de ésta, desarrollar catalizadores de zeolitas (Ni/MCM-22, Pt/MCM-22 y Pt-Ni/MCM-22. La obtención de estos catalizadores se realizó mediante el proceso de intercambio competitivo de iones. Estos materiales se caracterizaron por Difracción de Rayos X (DRX, Espectrometría de Energía Dispersiva (EDX, Termogravimétrico (TGA, y grado de adsorción de n-butilamina. La difracción de rayos X del precursor MCM-22 (P mostró los picos típicos de la topología MWW (Mobil tWenty tWo. En el patrón de difracción de la muestra calcinada no se observaron picos relacionados con la materia orgánica responsable por la producción de la zeolita MCM-22. Se verificó por termogravimetría, que la pérdida de masa en las muestras del catalizador se encuentra cercana a los 150 °C. La pérdida de masa total de los catalizadores muestra una reducción considerable en la cantidad de n-butilamina fisisorbida para el catalizador bimetálico.

  9. Gas cluster ion beam assisted NiPt germano-silicide formation on SiGe

    Energy Technology Data Exchange (ETDEWEB)

    Ozcan, Ahmet S., E-mail: asozcan@us.ibm.com [IBM Almaden Research Center, 650 Harry Road, San Jose, California 95120 (United States); Lavoie, Christian; Jordan-Sweet, Jean [IBM T. J. Watson Research Center, 1101 Kitchawan Road, Yorktown Heights, New York 10598 (United States); Alptekin, Emre; Zhu, Frank [IBM Semiconductor Research and Development Center, 2070 Route 52, Hopewell Junction, New York 12533 (United States); Leith, Allen; Pfeifer, Brian D.; LaRose, J. D.; Russell, N. M. [TEL Epion Inc., 900 Middlesex Turnpike, Bldg. 6, Billerica, Massachusetts 01821 (United States)

    2016-04-21

    We report the formation of very uniform and smooth Ni(Pt)Si on epitaxially grown SiGe using Si gas cluster ion beam treatment after metal-rich silicide formation. The gas cluster ion implantation process was optimized to infuse Si into the metal-rich silicide layer and lowered the NiSi nucleation temperature significantly according to in situ X-ray diffraction measurements. This novel method which leads to more uniform films can also be used to control silicide depth in ultra-shallow junctions, especially for high Ge containing devices, where silicidation is problematic as it leads to much rougher interfaces.

  10. Gas cluster ion beam assisted NiPt germano-silicide formation on SiGe

    International Nuclear Information System (INIS)

    Ozcan, Ahmet S.; Lavoie, Christian; Jordan-Sweet, Jean; Alptekin, Emre; Zhu, Frank; Leith, Allen; Pfeifer, Brian D.; LaRose, J. D.; Russell, N. M.

    2016-01-01

    We report the formation of very uniform and smooth Ni(Pt)Si on epitaxially grown SiGe using Si gas cluster ion beam treatment after metal-rich silicide formation. The gas cluster ion implantation process was optimized to infuse Si into the metal-rich silicide layer and lowered the NiSi nucleation temperature significantly according to in situ X-ray diffraction measurements. This novel method which leads to more uniform films can also be used to control silicide depth in ultra-shallow junctions, especially for high Ge containing devices, where silicidation is problematic as it leads to much rougher interfaces.

  11. Catalytic reduction of 4-nitrophenol over Ni-Pd nanodimers supported on nitrogen-doped reduced graphene oxide

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Lijun, E-mail: liulj@wtu.edu.cn [College of Chemistry and Chemical Engineering, Wuhan Textile University, Wuhan 430073, People' s Republic of China (China); Department of Chemical and Petroleum Engineering, University of Pittsburgh, Pittsburgh, PA 15261 (United States); Chen, Ruifen; Liu, Weikai [College of Chemistry and Chemical Engineering, Wuhan Textile University, Wuhan 430073, People' s Republic of China (China); Wu, Jiamin [Department of Chemical and Petroleum Engineering, University of Pittsburgh, Pittsburgh, PA 15261 (United States); Gao, Di, E-mail: gaod@pitt.edu [Department of Chemical and Petroleum Engineering, University of Pittsburgh, Pittsburgh, PA 15261 (United States)

    2016-12-15

    Catalytic reduction of toxic 4-nitrophenol to 4-aminophenol over magnetically recoverable nanocatalysts has attracted much attention. Herein, we report a Ni-Pd/NrGO catalyst through the growth of Ni-Pd nanodimers (NDs) on nitrogen-doped reduced graphene oxide (NrGO). The Ni-Pd NDs show a heterogeneous nanostructure with Ni and Pd subparts contacting with each other, remarkably different from the frequently-observed core/shell nanoparticles (NPs) or nanoalloy. The formation of Ni-Pd NDs follows an initial deposition of Pd NPs on the graphene and in-situ catalytic generation of Ni subparts over the newly-generated Pd NPs. The resulting Ni-Pd/NrGO exhibits a superior catalytic activity towards the reduction of 4-nitrophenol at room temperature with a high rate constant (3400 s{sup -1} g{sup -1}) and a low activated energy (29.1 kJ mol{sup -1}) as compared to unsupported Ni-Pd NDs and supported monometallic catalysts. The conversion rate of 4-NP is calculated to be 99.5% and the percent yield (%) of 4-AP is as high as 99.1%. A synergistic catalysis mechanism is rationally proposed, which is ascribed to the electronic modification of Ni-Pd metals due to the strong metal/support interaction (SMSI) effect as well as the electron transfer between Ni and Pd. The hybrid catalyst shows soft ferromagnetic properties and can be magnetically separated and recycled without obvious loss of activity.

  12. Porous Ni@Pt core-shell nanotube array electrocatalyst with high activity and stability for methanol oxidation.

    Science.gov (United States)

    Ding, Liang-Xin; Li, Gao-Ren; Wang, Zi-Long; Liu, Zhao-Qing; Liu, Hong; Tong, Ye-Xiang

    2012-07-02

    Bimetallic core-shell nanostructures are emerging as more important materials than monometallic nanostructures, and have much more interesting potential applications in various fields, including catalysis and electronics. In this work, we demonstrate the facile synthesis of core-shell nanotube array catalysts consisting of Pt thin layers as the shells and Ni nanotubes as the cores. The porous Ni@Pt core-shell nanotube arrays were fabricated by ZnO nanorod-array template-assisted electrodeposition, and they represent a new class of nanostructures with a high electrochemically active surface area of 50.08 m(2)  (g Pt)(-1), which is close to the value of 59.44 m(2)  (g Pt)(-1) for commercial Pt/C catalysts. The porous Ni@Pt core-shell nanotube arrays also show markedly enhanced electrocatalytic activity and stability for methanol oxidation compared with the commercial Pt/C catalysts. The attractive performances exhibited by these prepared porous Ni@Pt core-shell nanotube arrays make them promising candidates as future high-performance catalysts for methanol electrooxidation. The facile method described herein is suitable for large-scale, low-cost production, and significantly lowers the Pt loading, and thus, the cost of the catalysts. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Unsupported NiPt alloy metal catalysts prepared by water-in-oil (W/O) microemulsion method for methane cracking

    KAUST Repository

    Zhou, Lu

    2016-05-18

    Unsupported NiPt metal catalyst with Ni/Pt molar ratio of 88/12 is prepared by water-in-oil (W/O) microemulsion method in this study. Compared to monometallic Ni and Pt catalysts, the NiPt catalyst exhibits superior activity and stability for methane cracking. By XRD (X-ray powder diffraction), XPS (X-ray photoelectron spectroscopy) and TEM (Transmission electron microscopy) analyses, the formation of Ni(0)Pt(0) alloy is believed to be the main reason for the reactivity improvement of this catalyst. Carbon nano tube (CNT) with Ni(0)Pt(0) particles anchored on the top of tube are found for the NiPt catalyst. © 2016 Elsevier Ltd.

  14. Chemical synthesis, phase transformation and magnetic proprieties of FePt and FePd nanoparticles

    International Nuclear Information System (INIS)

    Delattre, Anastasia

    2010-01-01

    This work aims at understanding the chemical synthesis of FePt and FePd nanoparticles (NPs), and at exploring how to implement the phase transformation from the chemically disordered to the L10 phase, without coalescence. Using hexadecanenitrile instead of oleylamine, we obtain NPs with a more homogenous internal composition, instead of core-shell NPs. Through a systematic study (designed experiment relying on Taguchi tables), we developed the FePd synthesis, while evidencing the role of each ligand and of the reductor. To induce the crystalline phase transformation while avoiding coalescence, we explored two ways. In the first one, atomic vacancies are introduced in the NPs through light ion irradiation, atomic mobility being ensured by annealing at moderate temperature (300 C). As a result, the blocking temperature is multiplied by 4, due to anisotropy enhancement. However, strong chemical ordering in the L10 phase cannot be achieved. The second approach relies on the dispersion of the NPs in a salt (NaCl) matrix, prior to annealing at 700 C: high chemical ordering is achieved, and the blocking temperature is beyond 400 C. We then developed a single-step process to remove the salt by dissolution in water and to re-disperse NPs in stable aqueous or organics solutions. These high magnetic anisotropy NPs are then readily available for further chemical or manipulation steps, with applied perspectives in areas such as data storage, or biology. (author)

  15. Pd-Ni alloy nanoparticle/carbon nanofiber composites: preparation, structure, and superior electrocatalytic properties for sugar analysis.

    Science.gov (United States)

    Guo, Qiaohui; Liu, Dong; Zhang, Xueping; Li, Libo; Hou, Haoqing; Niwa, Osamu; You, Tianyan

    2014-06-17

    Novel Pd-Ni alloy nanoparticle/carbon nanofiber (Pd-Ni/CNF) composites were successfully prepared by a simple method involving electrospinning of precursor polyacrylonitrile/Pd(acac)2/Ni(acac)2 nanofibers, followed by a thermal process to reduce metals and carbonize polyacrylonitrile. The nanostructures of the resulting Pd-Ni/CNF nanocomposites were carefully examined by a combination of scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), high-angle annular dark field (HAADF)-scanning transmission electron microscopy (STEM), energy dispersive X-ray (EDX), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and X-ray photoelectron spectra (XPS). For all the nanocomposites, the Pd-Ni alloy nanoparticles (NPs) were dispersed uniformly and embedded firmly within the framework or on the surface of CNF. The size, composition, and alloy homogeneity of the Pd-Ni alloy NPs could be readily tailored by controlling the feed ratio of metal precursors and the thermal treatment process. Cyclic voltammetric studies showed enhanced redox properties for Pd-Ni/CNF-based electrodes relative to the Ni-metal electrode and significantly improved electrocatalytic activity for sugar (e.g., glucose, fructose, sucrose, and maltose) oxidation. The application potential of Pd-Ni/CNF-based electrodes in flow systems for sugars detection was explored. A very low limit of detection for sugars (e.g., 7-20 nM), high resistance to surface fouling, excellent signal stability and reproducibility, and a very wide detection linear range (e.g., 0.03-800 μM) were revealed for this new type of Pd-Ni/CNF nanocomposite as the detecting electrode. Such detection performances of Pd-Ni/CNF-based electrodes are superior to those of state-of-the-art nonenzymatic sugar detectors that are commercially available or known in the literature.

  16. One-pot synthesis of a PtPd dendritic nanocube cage superstructure on graphenes as advanced catalysts for oxygen reduction

    Science.gov (United States)

    Zheng, Yuanyuan; Qiao, Junhua; Yuan, Junhua; Shen, Jianfeng; Wang, Ai-Jun; Gong, Peijun

    2018-03-01

    How to use Pt economically and efficiently in the oxygen reduction reaction (ORR) is of theoretical and practical significance for the industrialization of the proton-exchange membrane fuel cells. In order to minimize Pt consumption and optimize the ORR performance, the ORR catalysts are recommended to be designed as a porous nanostructure. Herein, we report a one-pot solvothermal strategy to prepare PtPd dendritic nanocube cages via a galvanic replacement mechanism triggered by an I- ion. These PtPd alloy crystals are nanoporous, and uniformly dispersed on reduced graphene oxides (RGOs). The size of the PtPd dendritic nanocube cages can be easily tuned from 20-80 nm by controlling their composition. Their composition is optimized to be 1:5 Pt/Pd atomic ratio for these RGO-supported PtPd dendritic nanocages. This catalyst shows superior ORR performance with a specific activity of 2.01 mA cm-2 and a mass activity of 4.45 A mg-1 Pt, far above those for Pt/C catalysts (0.288 mA cm-2 for specific activity, and 0.21 A mg-1 Pt for mass activity). In addition to ORR activity, it also exhibits robust durability with almost negligible decay in ORR mass activity after 10 000 voltammetric cycling.

  17. Deformation-induced nanoscale mixing reactions in Cu/Ni and Ag/Pd multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Z.; Perepezko, J. H., E-mail: perepezk@engr.wisc.edu [Department of Materials Science and Engineering, University of Wisconsin-Madison, 1509 University Avenue, Madison, Wisconsin 53706 (United States)

    2013-11-04

    During the repeated cold rolling of Cu/Ni and Ag/Pd multilayers, a solid solution forms at the interfaces as nanoscale layer structure with a composition that replicates the overall multilayer composition. The interfacial mixing behavior was investigated by means of X-ray diffraction and scanning transmission electron microscopy. During deformation induced reaction, the intermixing behavior of the Cu/Ni and Ag/Pd multilayers is in contrast to thermally activated diffusion behavior. This distinct behavior can provide new kinetic pathways and offer opportunities for microstructure control that cannot be achieved by thermal processing.

  18. Hydrogen poisoning of the CO oxidation reaction on Pt and Pd under ultrahigh vacuum conditions

    International Nuclear Information System (INIS)

    Strozier, J.A.

    1977-01-01

    The poisoning by hydrogen of the catalyzed oxidation of CO on Pt and Pd under ultrahigh vacuum conditions was investigated. ac pulsing techniques are used in which the pressure of the reactant CO in the reaction chamber is modulated periodically by means of a fast piezoelectric ultrahigh vacuum valve, and the ac component of the product CO 2 is recorded mass spectroscopically by phase-sensitive techniques. The ac CO 2 production rate is measured as a function of hydrogen pressure (1 - 10 x 10 -9 toor) at constant CO and O 2 pressures (approximately equal to 5 x 10 -8 torr), and constant temperature (approximately equal to 700 K). Exact theoretical calculations of CO 2 production rates were carried out employing several models, i.e., oxygen burn-off by hydrogen, incorporating both the Eley-Rideal and Langmuir-Hinshelwood mechanisms. From a comparison with the experimental results, the probable reaction is of the Langmuir-Hinshelwood type and the relevant rate constant is also determined. These results are compared with other results in the literature on hydrogen oxidation on the surface of Pt

  19. Surface Pourbaix diagrams and oxygen reduction activity of Pt, Ag and Ni(111) surfaces studied by DFT

    DEFF Research Database (Denmark)

    Hansen, Heine Anton; Rossmeisl, Jan; Nørskov, Jens Kehlet

    2008-01-01

    The electrochemical most stable surface structures is investigated as function of pH and potential for Pt, Ag and Ni based on DFT calculations and constructed surface Pourbaix diagrams. It is also explained why metals such as Ag and Ni may be used successfully in alkaline fuel cells but not in ac......The electrochemical most stable surface structures is investigated as function of pH and potential for Pt, Ag and Ni based on DFT calculations and constructed surface Pourbaix diagrams. It is also explained why metals such as Ag and Ni may be used successfully in alkaline fuel cells...

  20. O$_2$ adsorption trends on small supported PtNi clusters

    OpenAIRE

    Paz-Borbon, Lauro Oliver; Baletto, Francesca

    2016-01-01

    We present a systematic analysis of molecular oxygen (O$_2$) adsorption trends on bimetallic PtNi clusters and their monometallic counterparts supported on MgO(100), by means of periodic DFT calculations for sizes between 25 up to 58 atoms. O$_2$ adsorption was studied on a variety of inequivalent sites for different structural motifs, such as truncated octahedral (TO), cuboctahedral (CO), icosahedral (Ih) and decahedral (Dh) geometries. We found that O$_2$ prefers to bind on top of two metal...

  1. Pt, PtCo and PtNi electrocatalysts prepared by mechanical alloying for the oxygen reduction reaction in 0.5 M H{sub 2}SO{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Contreras, M.A. [Instituto Nacional de Investigaciones Nucleares, Depto. de Quimica, Apdo. Postal 18-1027 Col. Escandon, C.P.11801 Mexico D.F. (Mexico); Instituto Politecnico Nacional, Depto. de Ing. Metalurgica, 07300 Mexico D.F. (Mexico); Fernandez-Valverde, S.M. [Instituto Nacional de Investigaciones Nucleares, Depto. de Quimica, Apdo. Postal 18-1027 Col. Escandon, C.P.11801 Mexico D.F. (Mexico); Vargas-Garcia, J.R. [Instituto Politecnico Nacional, Depto. de Ing. Metalurgica, 07300 Mexico D.F. (Mexico); Cortes-Jacome, M.A.; Toledo-Antonio, J.A.; Angeles-Chavez, C. [Instituto Mexicano del Petroleo, Programa de Ingenieria Molecular, Eje Central Lazaro Cardenas 152, Mexico, D.F.,0 7730 (Mexico)

    2008-11-15

    Electrocatalysts of Pt, PtCo and PtNi powders for the oxygen reduction reaction (ORR) were processed by Mechanical Alloying. Physical characterization was made by X-ray diffraction, scanning electron microscopy and scanning transmission electron microscopy. It was found that milled powders formed agglomerates in the range of 0.2-20 {mu}m formed by nanometric size crystallites. The synthesized powders were alloys of PtFe, PtCoFe and PtNiFe due to iron incorporation during the milling process. The binding energies of Pt in the alloys were determined by XPS. Polarization curves were obtained by Rotating Disk Electrode technique in 0.5 M H{sub 2}SO{sub 4} to determine the electrocatalytic activity of the mechanically alloyed powders. Tafel curves were plotted and kinetic parameters for the ORR were calculated. The PtFe alloy showed the highest electrocatalytic activity for the ORR. However, the lowest overpotential was found for the PtCoFe alloy and it also showed a higher current exchange density. A linear relationship was found between the Pt-binding energy in the alloys and the overpotential at the same current density independent of the Pt alloy composition. (author)

  2. Structural stability of Pd40Cu30Ni10P20 metallic glass in supercooled liquid region

    International Nuclear Information System (INIS)

    Jiang, J.Z.; Saksl, K.

    2004-01-01

    Phase separation of bulk and ribbon Pd 40 Cu 30 Ni 10 P 20 glasses, annealed in the supercooled liquid region at ambient pressure and high pressures, has been studied by means of differential scanning calorimetry (DSC) and X-ray diffraction techniques. DSC measurements show only one glass transition event in all annealed samples, indicating that no phase separation occurs in the alloy annealed in the supercooled liquid region. Phase analyses reveal at least six crystalline phases in the crystallized sample: monoclinic, tetragonal Cu 3 Pd-like, rhombohedral, fcc-Ni 2 Pd 2 P, fcc-(Ni, Pd) solid solution, and body-centered tetragonal (bct) Ni 3 P-like phases. Annealing treatments under external pressures in the vicinity of the glass transition temperature neither induce phase separation nor alter the glass transition temperature of the Pd 40 Cu 30 Ni 10 P 20 bulk glass

  3. Crystallization of Pd40CU30Ni10P20 bulk metallic glass with and without pressure

    DEFF Research Database (Denmark)

    Yang, B.; Jiang, Jianzhong; Zhuang, Yanxin

    2007-01-01

    The glass-transition behavior of Pd40Cu30Ni10P20 bulk metallic glass was investigated by differential scanning calorimetry (DSC) and X-ray powder diffraction (XRD). The effect of pressure on the crystallization behavior of Pd40Cu30Ni10P20 bulk glass was studied by in situ high-pressure and high......-temperature X-ray powder diffraction using synchrotron radiation. Phase analyses show at least six crystalline phases in the crystallized sample, namely, monoclinic, tetragonal Cu3Pd-like, rhombohedral, fcc-Ni2Pd2P, fcc-(Ni, Pd) solid solution, and body-centered tetragonal (bct) Ni3P-like phases. The onset...

  4. Variations of color with alloying elements in Pd-free Au-Pt-based high noble dental alloys

    International Nuclear Information System (INIS)

    Shiraishi, Takanobu; Takuma, Yasuko; Miura, Eri; Fujita, Takeshi; Hisatsune, Kunihiro

    2007-01-01

    The effects of alloying addition of a small amount of base metals (In, Sn, Fe, Zn) on color variations in Pd-free Au-Pt-based high noble dental alloys were investigated in terms of rectilinear and polar color coordinates. The ternary Au-Pt-X (X = In, Sn, Fe, Zn) and quaternary Au-Pt-In-Y (Y = Sn, Fe, Zn) alloys were prepared from high purity component metals. The amount of alloying base metals, X and Y, were restricted up to 2 at.%. The alloying addition of a small amount of Fe, In, Sn, to a binary Au-10 at.% Pt alloy (referred to as AP10) effectively increased chroma, C *. On the other hand, the addition of Zn to the parent alloy AP10 did not change color coordinates greatly. The increase in chroma in the present Au-Pt-based high noble alloys was attributed to the increase in the slope of spectral reflectance curve at its absorption edge near 515 nm. It was found that the addition of a small amount of Fe to the parent alloy AP10 markedly increased lightness, L *, and the addition of Sn gave a very light tint of red to the parent alloy. Although red-green chromaticity index a * contributed to chroma to some extent, contribution of yellow-blue chromaticity index b * was much greater in determining chroma in this Pd-free Au-Pt-based multi-component alloys. The present results are expected to be valuable in case color is to be taken into account in designing Pd-free Au-Pt-based high noble dental alloys

  5. Adsorption and reaction of propanal, 2-propenol and 1-propanol on Ni/Pt(111) bimetallic surfaces

    Science.gov (United States)

    Murillo, Luis E.; Chen, Jingguang G.

    2008-07-01

    The hydrogenation of acrolein (CH 2dbnd CH sbnd CH dbnd O) can lead to the formation of three hydrogenation products, 2-propenol (CH 2dbnd CH sbnd CH 2sbnd OH), propanal (CH 3sbnd CH 2sbnd CH dbnd O), and 1-propanol (CH 3sbnd CH 2sbnd CH 2sbnd OH). In the current study the adsorption and reaction of these three molecules were investigated on Ni/Pt(111) surfaces to understand the different hydrogenation pathways of acrolein, using temperature programmed desorption (TPD) and high resolution electron energy loss spectroscopy (HREELS). TPD experiments showed that 2-propenol underwent isomerization toward propanal on Pt(111) and the Pt sbnd Ni sbnd Pt(111) bimetallic surface, with a dominant decarbonylation pathway on the Pt(111) surface. A self-hydrogenation (disproportionation) pathway toward 1-propanol was observed on the Ni(111) film, however, the decarbonylation pathway was found to be the most dominant on this surface. Unlike 2-propenol, propanal did not undergo isomerization or self-hydrogenation pathways on any of the surfaces, with the dominant pathway being primarily the decarbonylation on Pt(111) and Ni(111). In contrast, 1-propanol underwent mainly molecular desorption from all three surfaces. These results provided additional understanding of previous studies of hydrogenation pathways of acrolein on the Ni/Pt(111) surfaces.

  6. Theoretical insights into the energetics and electronic properties of MPt{sub 12} (M = Fe, Co, Ni, Cu, and Pd) nanoparticles supported by N-doped defective graphene

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Qing [Key Laboratory of Theoretical and Computational Photochemistry, Ministry of Education, College of Chemistry, Beijing Normal University, Beijing, 100875 (China); Tian, Yu [College of Chemistry and Chemical Engineering, Harbin Normal University, Harbin, 150025 (China); Chen, Guangju, E-mail: gjchen@bnu.edu.cn [Key Laboratory of Theoretical and Computational Photochemistry, Ministry of Education, College of Chemistry, Beijing Normal University, Beijing, 100875 (China); Zhao, Jingxiang, E-mail: xjz_hmily@163.com [College of Chemistry and Chemical Engineering, Harbin Normal University, Harbin, 150025 (China)

    2017-03-01

    Highlights: • We studied the deposition of several Pt-based alloy NPs on N-doped defective graphene. • The N-doped graphene can provide anchoring site for Pt-based NPs. • The electronic properties of Pt-based NPs have been greatly modified. • The catalytic properties of Pt-based NPs can be enhanced. - Abstract: Enhancing the catalytic activity and decreasing the usage of Pt catalysts has been a major target in widening their applications for developing proton-exchange membrane fuel cells. In this work, the adsorption energetics, structural features, and electronic properties of several MPt{sub 12} (M = Fe, Co, Ni, Cu, and Pd) nanoparticles (NPs) deposited on N-doped defective graphene were systemically explored by means of comprehensive density functional theory (DFT) computations. The computations revealed that the defective N-doped graphene substrate can provide anchoring site for these Pt-based alloying NPs due to their strong hybridization with the sp{sup 2} dangling bonds at the defect sites of substrate. Especially, these deposited MPt{sub 12} NPs exhibit reduced magnetic moment and their average d-band centers are shifted away from the Fermi level, as compared with the freestanding NPs, leading to the reduction of the adsorption energies of the O species. Thus, the defective N-doped graphene substrate not only enhances the stability of the deposited MPt{sub 12} NPs, but also endows them higher catalytic performance for the oxygen reduction reaction.

  7. The atomistic origin of the extraordinary oxygen reduction activity of Pt3Ni7 fuel cell catalysts.

    Science.gov (United States)

    Fortunelli, Alessandro; Goddard Iii, William A; Sementa, Luca; Barcaro, Giovanni; Negreiros, Fabio R; Jaramillo-Botero, Andrés

    2015-07-01

    Recently Debe et al. reported that Pt 3 Ni 7 leads to extraordinary Oxygen Reduction Reaction (ORR) activity. However, several reports show that hardly any Ni remains in the layers of the catalysts close to the surface ("Pt-skin effect"). This paradox that Ni is essential to the high catalytic activity with the peak ORR activity at Pt 3 Ni 7 while little or no Ni remains close to the surface is explained here using large-scale first-principles-based simulations. We make the radical assumption that processing Pt-Ni catalysts under ORR conditions would leach out all Ni accessible to the solvent. To simulate this process we use the ReaxFF reactive force field, starting with random alloy particles ranging from 50% Ni to 90% Ni and containing up to ∼300 000 atoms, deleting the Ni atoms, and equilibrating the resulting structures. We find that the Pt 3 Ni 7 case and a final particle radius around 7.5 nm lead to internal voids in communication with the exterior, doubling the external surface footprint, in fair agreement with experiment. Then we examine the surface character of these nanoporous systems and find that a prominent feature in the surface of the de-alloyed particles is a rhombic structure involving 4 surface atoms which is crystalline-like but under-coordinated. Using density-functional theory, we calculate the energy barriers of ORR steps on Pt nanoporous catalysts, focusing on the O ad -hydration reaction (O ad + H 2 O ad → OH ad + OH ad ) but including the barriers of O 2 dissociation (O 2ad → O ad + O ad ) and water formation (OH ad + H ad → H 2 O ad ). We find that the reaction barrier for the O ad -hydration rate-determining-step is reduced significantly on the de-alloyed surface sites compared to Pt(111). Moreover we find that these active sites are prevalent on the surface of particles de-alloyed from a Pt-Ni 30 : 70 initial composition. These simulations explain the peak in surface reactivity at Pt 3 Ni 7 , and provide a rational guide to

  8. Structural Changes of Highly Active Pd/MeOx (Me = Fe, Co, Ni during Catalytic Methane Combustion

    Directory of Open Access Journals (Sweden)

    Dominik Seeburg

    2018-01-01

    Full Text Available Fe2O3, Co3O4 and NiO nanoparticles were prepared via a citrate method and further functionalized with Pd by impregnation. The pure oxides as well as Pd/Fe2O3, Pd/Co3O4, and Pd/NiO (1, 5 and 10 wt % Pd were employed for catalytic methane combustion under methane lean (1 vol %/oxygen rich (18 vol %, balanced with nitrogen conditions. Already, the pure metal oxides showed a high catalytic activity leading to complete conversion temperature of T100 ≤ 500 °C. H2-TPR (Temperature-programmed reduction experiments revealed that Pd-functionalized metal oxides exhibited enhanced redox activity compared to the pure oxides leading to improved catalytic combustion activity at lower temperatures. At a loading of 1 wt % Pd, 1Pd/Co3O4 (T100 = 360 °C outperforms 1Pd/Fe2O3 (T100 = 410 °C as well as 1Pd/NiO (T100 = 380 °C. At a loading of 10 wt % Pd, T100 could only be slightly reduced in all cases. 1Pd/Co3O4 and 1Pd/NiO show reasonable stability over 70 h on stream at T100. XPS (X-ray photoelectron spectroscopy and STEM (Scanning transmission electron microscopy investigations revealed strong interactions between Pd and NiO as well as Co3O4, respectively, leading to dynamic transformations and reoxidation of Pd due to solid state reactions, which leads to the high long-term stability.

  9. Effect of Preparation of Pd and Pd-Pt Catalysts from Acid Leached Silica-Alumina on Their Activity in HDS of Thiophene and Benzothiophene

    Czech Academy of Sciences Publication Activity Database

    Vít, Zdeněk; Kmentová, Hana; Kaluža, Luděk; Gulková, Daniela; Boaro, M.

    108-109, 1-2 (2011), s. 152-160 ISSN 0926-3373 R&D Projects: GA ČR GA104/09/0751; GA ČR GAP106/11/0902 Institutional research plan: CEZ:AV0Z40720504 Keywords : hydrodesulfurization * silica-alumina * Pd-Pt catalyst Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 5.625, year: 2011

  10. Pt@Ag and Pd@Ag core/shell nanoparticles for catalytic degradation of Congo red in aqueous solution.

    Science.gov (United States)

    Salem, Mohamed A; Bakr, Eman A; El-Attar, Heba G

    2018-01-05

    Platinum/silver (Pt@Ag) and palladium/silver (Pd@Ag) core/shell NPs have been synthesized in two steps reaction using the citrate method. The progress of nanoparticle formation was followed by the UV/Vis spectroscopy. Transmission electron microscopy revealed spherical shaped core/shell nanoparticles with average particle diameter 32.17nm for Pt@Ag and 8.8nm for Pd@Ag. The core/shell NPs were further characterized by FT-IR and XRD. Reductive degradation of the Congo red dye was chosen to demonstrate the excellent catalytic activity of these core/shell nanostructures. The nanocatalysts act as electron mediators for the transfer of electrons from the reducing agent (NaBH 4 ) to the dye molecules. Effect of reaction parameters such as nanocatalyst dose, dye and NaBH 4 concentrations on the dye degradation was investigated. A comparison between the catalytic activities of both nanocatalysts was made to realize which of them the best in catalytic performance. Pd@Ag was the higher in catalytic activity over Pt@Ag. Such greater activity is originated from the smaller particle size and larger surface area. Pd@Ag nanocatalyst was catalytically stable through four subsequent reaction runs under the utilized reaction conditions. These findings can thus be considered as possible economical alternative for environmental safety against water pollution by dyes. Copyright © 2017. Published by Elsevier B.V.

  11. Pt@Ag and Pd@Ag core/shell nanoparticles for catalytic degradation of Congo red in aqueous solution

    Science.gov (United States)

    Salem, Mohamed A.; Bakr, Eman A.; El-Attar, Heba G.

    2018-01-01

    Platinum/silver (Pt@Ag) and palladium/silver (Pd@Ag) core/shell NPs have been synthesized in two steps reaction using the citrate method. The progress of nanoparticle formation was followed by the UV/Vis spectroscopy. Transmission electron microscopy revealed spherical shaped core/shell nanoparticles with average particle diameter 32.17 nm for Pt@Ag and 8.8 nm for Pd@Ag. The core/shell NPs were further characterized by FT-IR and XRD. Reductive degradation of the Congo red dye was chosen to demonstrate the excellent catalytic activity of these core/shell nanostructures. The nanocatalysts act as electron mediators for the transfer of electrons from the reducing agent (NaBH4) to the dye molecules. Effect of reaction parameters such as nanocatalyst dose, dye and NaBH4 concentrations on the dye degradation was investigated. A comparison between the catalytic activities of both nanocatalysts was made to realize which of them the best in catalytic performance. Pd@Ag was the higher in catalytic activity over Pt@Ag. Such greater activity is originated from the smaller particle size and larger surface area. Pd@Ag nanocatalyst was catalytically stable through four subsequent reaction runs under the utilized reaction conditions. These findings can thus be considered as possible economical alternative for environmental safety against water pollution by dyes.

  12. Atomic resolution imaging of polyhedral PtPd core-shell nanoparticles by Cs-corrected STEM.

    Science.gov (United States)

    Khanal, Subarna; Casillas, Gilberto; Velazquez-Salazar, J Jesus; Ponce, Arturo; Jose-Yacaman, Miguel

    2012-11-08

    Bimetallic nanoparticles present different properties than their monometallic counterparts, opening a wide range of possibilities for different applications. PtPd nanoparticles have raised interest for their many applications in fuel cells, ethanol and methanol oxidation reactions, hydrogen storage, etc. However, the cost of Pt makes it unpractical to use in big quantities; therefore, one of the big challenges is to synthesize very small catalysts in order to maximize the efficiency in their use. In this work, we synthesized polyhedral PtPd core-shell nanoparticles under 20 nm and characterized them by Cs-corrected scanning transmission electron microscopy. This technique allowed us to probe the structure at the atomic level of these nanoparticles revealing new structural information. We determined the structure of the three main polyhedral morphologies obtained in the synthesis: octahedral, decahedral and triangular plates. Decahedral PtPd core-shell nanoparticles are novel morphologies for this system. Morphology and defects present in the nanoparticles are shown and discussed.

  13. Phosphorescent Pt(II) and Pd(II) Complexes for Efficient, High-Color-Quality, and Stable OLEDs.

    Science.gov (United States)

    Fleetham, Tyler; Li, Guijie; Li, Jian

    2017-02-01

    Phosphorescent organic light-emitting diodes (OLEDs) are leading candidates for next-generation displays and solid-state lighting technologies. Much of the academic and commercial pursuits in phosphorescent OLEDs have been dominated by Ir(III) complexes. Over the past decade recent developments have enabled square planar Pt(II) and Pd(II) complexes to meet or exceed the performance of Ir complexes in many aspects. In particular, the development of N-heterocyclic carbene-based emitters and tetradentate cyclometalated Pt and Pd complexes have significantly improved the emission efficiency and reduced their radiative lifetimes making them competitive with the best reported Ir complexes. Furthermore, their unique and diverse molecular design possibilities have enabled exciting photophysical attributes including narrower emission spectra, excimer -based white emission, and thermally activated delayed fluorescence. These developments have enabled the fabrication of efficient and "pure" blue OLEDs, single-doped white devices with EQEs of over 25% and high CRI, and device operational lifetimes which show early promise that square planar metal complexes can be stable enough for commercialization. These accomplishments have brought Pt complexes to the forefront of academic research. The molecular design strategies, photophysical characteristics, and device performance resulting from the major advancements in emissive Pt and Pd square planar complexes are discussed. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Estimate of the applicability of Pd-Pt nanoalloy for data recording by the method of phase change

    Science.gov (United States)

    Redel, L. V.; Gafner, Yu. Ya.; Gafner, S. L.; Zamulin, I. S.; Goloven'ko, Zh. V.

    2017-05-01

    Based on the computer simulation, the applicability of using individual nanoclusters of Pt, Pd, and particles of the Pd-Pt nanoalloy as unites of storage of data bits in nonvolatile memory devices, store capability of which is based on the principle of the phase change of the state of the carrier of information, has been estimated. To this end, the temperature and size limits of stability of different internal structures of nanoparticles in the course of the heating (to melting) and subsequent solidification (crystallization) with different rates of heat removal have been established. The results of the computer simulation of the nanoparticles of chemically pure platinum, palladium, and their alloy with different content of Pt atoms have been compared. It has been concluded that the best material for the memory cells the store capability of which is based on the occurrence of phase transitions is the nanoclusters of the Pd-Pt alloy with 10% platinum with a diameter D ≥ 3.5 nm.

  15. Synthesis of ultrathin face-centered-cubic Au@Pt and Au@Pd core-shell nanoplates from hexagonal-close-packed Au square sheets

    KAUST Repository

    Fan, Zhanxi

    2015-03-17

    The synthesis of ultrathin face-centered-cubic (fcc) Au@Pt rhombic nanoplates is reported through the epitaxial growth of Pt on hexagonal-close-packed (hcp) Au square sheets (AuSSs). The Pt-layer growth results in a hcp-to-fcc phase transformation of the AuSSs under ambient conditions. Interestingly, the obtained fcc Au@Pt rhombic nanoplates demonstrate a unique (101)f orientation with the same atomic arrangement extending from the Au core to the Pt shell. Importantly, this method can be extended to the epitaxial growth of Pd on hcp AuSSs, resulting in the unprecedented formation of fcc Au@Pd rhombic nanoplates with (101)f orientation. Additionally, a small amount of fcc (100)f-oriented Au@Pt and Au@Pd square nanoplates are obtained with the Au@Pt and Au@Pd rhombic nanoplates, respectively. We believe that these findings will shed new light on the synthesis of novel noble bimetallic nanostructures. Phase change: Ultrathin Au@Pt and Au@Pd core-shell nanoplates were prepared from Au square sheets. A phase transformation from hexagonal close-packed (hcp) to face-centered cubic (fcc) is observed upon coating the hcp Au square sheets with Pt or Pd under ambient conditions. The prepared fcc Au@Pt and Au@Pd rhombic nanoplates demonstrate unique (101)f orientation (picture shows a typical fcc Au@Pt rhombic nanoplate). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Carbon supported Pd-Ni and Pd-Ru-Ni nanocatalysts for the alkaline direct ethanol fuel cell (DEFC)

    CSIR Research Space (South Africa)

    Modibedi, M

    2011-09-01

    Full Text Available alkaline anion exchange membranes (AAEMs) as the electrolyte which protects the electrodes from carbonate formation. Pd has proved to be a good electrocatalyst for ethanol oxidation in alkaline medium, showing higher activity and better steady...

  17. Ultra small angle neutron scattering from amorphous Ni-Pd-P-alloys

    International Nuclear Information System (INIS)

    Hagenmayer, R.M.; Zeyen, C.M.E.; Lamparter, P.; Steeb, S.

    1993-01-01

    Using a neutron double crystal spectrometer, thin amorphous Ni-Pd-P-samples were investigated at very small Q-values (10 -5 A -1 ≤ Q ≤ 10 -3 A -1 ). The immersion method shows that the small angle scattering effect is mainly caused by surface scattering. (orig.)

  18. Electrochemical Dealloying of PdCu3 Nanoparticles to Achieve Pt-like Activity for the Hydrogen Evolution Reaction.

    Science.gov (United States)

    Jana, Rajkumar; Bhim, Anupam; Bothra, Pallavi; Pati, Swapan K; Peter, Sebastian C

    2016-10-20

    Manipulating the d-band center of the metal surface and hence optimizing the free energy of hydrogen adsorption (ΔG H ) close to the optimal adsorption energy (ΔG H =0) for hydrogen evolution reaction (HER), is an efficient strategy to enhance the activity for HER. Herein, we report a oleylamine-mediated (acting as the solvent, stabilizer, and reducing agent) strategy to synthesize intermetallic PdCu 3 nanoparticles (NPs) without using any external reducing agent. Upon electrochemical cycling, PdCu 3 transforms into Pd-rich PdCu (ΔG H =0.05 eV), exhibiting remarkably enhanced activity (with a current density of 25 mA cm -2 at ∼69 mV overpotential) as an alternative to Pt for HER. The first-principle calculation suggests that formation of low coordination number Pd active sites alters the d-band center and hence optimal adsorption of hydrogen, leading to enhanced activity. This finding may provide guidelines towards the design and development of Pt-free highly active and robust electrocatalysts. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. M-Au/TiO2 (M = Ag, Pd, and Pt) nanophotocatalyst for overall solar water splitting: role of interfaces

    Science.gov (United States)

    Melvin, Ambrose A.; Illath, Kavya; Das, Tanmay; Raja, Thirumalaiswamy; Bhattacharyya, Somnath; Gopinath, Chinnakonda S.

    2015-08-01

    M-Au/TiO2 (M = Ag, Pd, Pt) composites were prepared through a facile one-pot photodeposition synthesis and evaluated for solar water splitting (SWS) with and without a sacrificial agent. The M-Au combination exhibits a dominant role in augmenting the H2 generation activity by forming a bi-metallic system. Degussa P25 was used as a TiO2 substrate to photodeposit Au followed by Au + M (M = Ag/Pd/Pt). The SWS activity of the M-Au/TiO2 was determined through photocatalytic H2 production in the presence of methanol as a sacrificial agent under one sun conditions with an AM1.5 filter. The highest H2 yield was observed for Pt0.5-Au1/TiO2 and was around 1.3 +/- 0.07 mmol h-1 g-1, with an apparent quantum yield (AQY) of 6.4%. Pt0.5-Au1/TiO2 also demonstrated the same activity for 25 cycles of five hours each for 125 h. Critically, the same Pt0.5-Au1/TiO2 catalyst was active in overall SWS (OSWS) without any sacrificial agent, with an AQY = 0.8%. The amount of Au and/or Pt was varied to obtain the optimum composition and it was found that the Pt0.5-Au1/TiO2 composition exhibits the best activity. Detailed characterization by physico-chemical, spectral and microscopy measurements was carried out to obtain an in-depth understanding of the origin of the photocatalytic activity of Pt0.5-Au1/TiO2. These in-depth studies show that gold interacts predominantly with oxygen vacancies present on titania surfaces, and Pt preferentially interacts with gold for an effective electron-hole pair separation at Pt-Au interfaces and electron storage in metal particles. The Pt in Pt0.5-Au1/TiO2 is electronically and catalytically different from the Pt in Pt/TiO2 and it is predicted that the former suppresses the oxygen reduction reaction.M-Au/TiO2 (M = Ag, Pd, Pt) composites were prepared through a facile one-pot photodeposition synthesis and evaluated for solar water splitting (SWS) with and without a sacrificial agent. The M-Au combination exhibits a dominant role in augmenting the H2

  20. Continuous syntheses of Pd@Pt and Cu@Ag core-shell nanoparticles using microwave-assisted core particle formation coupled with galvanic metal displacement.

    Science.gov (United States)

    Miyakawa, Masato; Hiyoshi, Norihito; Nishioka, Masateru; Koda, Hidekazu; Sato, Koichi; Miyazawa, Akira; Suzuki, Toshishige M

    2014-08-07

    Continuous synthesis of Pd@Pt and Cu@Ag core-shell nanoparticles was performed using flow processes including microwave-assisted Pd (or Cu) core-nanoparticle formation followed by galvanic displacement with a Pt (or Ag) shell. The core-shell structure and the nanoparticle size were confirmed using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) observation and EDS elemental mapping. The Pd@Pt nanoparticles with a particle size of 6.5 ± 0.6 nm and a Pt shell thickness of ca. 0.25 nm were synthesized with appreciably high Pd concentration (Pd 100 mM). This shell thickness corresponds to one atomic layer thickness of Pt encapsulating the Pd core metal. The particle size of core Pd was controlled by tuning the initial concentrations of Na2[PdCl4] and PVP. Core-shell Cu@Ag nanoparticles with a particle size of 90 ± 35 nm and an Ag shell thickness of ca. 3.5 nm were obtained using similar sequential reactions. Oxidation of the Cu core was suppressed by the coating of Cu nanoparticles with the Ag shell.

  1. Toward hybrid Au nanorods @ M (Au, Ag, Pd and Pt) core-shell heterostructures for ultrasensitive SERS probes

    Science.gov (United States)

    Xie, Xiaobin; Gao, Guanhui; Kang, Shendong; Lei, Yanhua; Pan, Zhengyin; Shibayama, Tamaki; Cai, Lintao

    2017-06-01

    Being able to precisely control the morphologies of noble metallic nanostructures is of essential significance for promoting the surface-enhanced Raman scattering (SERS) effect. Herein, we demonstrate an overgrowth strategy for synthesizing Au @ M (M = Au, Ag, Pd, Pt) core-shell heterogeneous nanocrystals with an orientated structural evolution and highly improved properties by using Au nanorods as seeds. With the same reaction condition system applied, we obtain four well-designed heterostructures with diverse shapes, including Au concave nanocuboids (Au CNs), Au @ Ag crystalizing face central cube nanopeanuts, Au @ Pd porous nanocuboids and Au @ Pt nanotrepangs. Subsequently, the exact overgrowth mechanism of the above heterostructural building blocks is further analysed via the systematic optimiziation of a series of fabrications. Remarkably, the well-defined Au CNs and Au @ Ag nanopeanuts both exhibit highly promoted SERS activity. We expect to be able to supply a facile strategy for the fabrication of multimetallic heterogeneous nanostructures, exploring the high SERS effect and catalytic activities.

  2. Enhanced activity of Pt/CNTs anode catalyst for direct methanol fuel cells using Ni2P as co-catalyst

    Science.gov (United States)

    Li, Xiang; Luo, Lanping; Peng, Feng; Wang, Hongjuan; Yu, Hao

    2018-03-01

    The direct methanol fuel cell is a promising energy conversion device because of the utilization of the state-of-the-art platinum (Pt) anode catalyst. In this work, novel Pt/Ni2P/CNTs catalysts were prepared by the H2 reduction method. It was found that the activity and stability of Pt for methanol oxidation reaction (MOR) could be significantly enhanced while using nickel phosphide (Ni2P) nanoparticles as co-catalyst. X-ray photoelectron spectroscopy revealed that the existence of Ni2P affected the particle size and electronic distribution of Pt obviously. Pt/CNTs catalyst, Pt/Ni2P/CNTs catalysts with different Ni2P amount were synthesized, among which Pt/6%Ni2P/CNTs catalyst exhibited the best MOR activity of 1400 mAmg-1Pt, which was almost 2.5 times of the commercial Pt/C-JM catalyst. Moreover, compared to other Pt-based catalysts, this novel Pt/Ni2P/CNTs catalyst also exhibited higher onset current density and better steady current density. The result of this work may provide positive guidance to the research on high efficiency and stability of Pt-based catalyst for direct methanol fuel cells.

  3. Mechanochemical synthesis of Co and Ni decorated with chemically deposited Pt as electrocatalysts for oxygen reduction reaction

    International Nuclear Information System (INIS)

    Flores-Rojas, E.; Cabañas-Moreno, J.G.; Pérez-Robles, J.F.; Solorza-Feria, O.

    2016-01-01

    High energy milling in combination with galvanic displacement were used for the preparation of bimetallic nanocatalysts. Co and Ni monometallic powders milled for 30 and 20 h, respectively were both produced in air atmosphere and used as precursors for the preparation of M-Pt (M = Co,Ni) compounds. Nanosized monometallic powders were physically supported on Vulcan carbon, and covered with 20 wt%Pt through a Galvanic Displacement Reaction (GDR) to produce Co-20Pt/C and Ni-20Pt/C electrocatalysts. XRD was used for phase identification on milled powders and for demonstrating structural transformations of Co powders during milling. Results on unmilled metallic Co powder show a predominant HCP structure modifying to a FCC structure after milling. Ni powders maintain their same FCC structure. Energy Dispersive X-Ray Spectometry (EDX) was used for chemical composition analysis on milled powders at several milling times. Scanning Transmission Electron Microscopy (STEM) show the formation of heterogeneous particle with ∼10 nm in size for both electrocatalysts. The electrocatalytic activity was evaluated by Cyclic Voltammetry (CV) and steady state Rotating Disk Electrode (RDE) for the Oxygen Reduction Reaction (ORR) in 0.1 M HClO 4 . The kinetic parameters on Co-20Pt/C conducted to the highest mass activity for the cathodic reaction. - Highlights: • Monometallic powders of Co, and Ni were used as precursors for the preparation of M-Pt (M = Co,Ni) electrocatalysts. • Nanosized monometallic powders were decorated with Pt by a Galvanic Displacement Reaction. • The kinetic parameters on Co-20Pt/C conducted to the highest mass activity for the ORR reaction.

  4. Mechanochemical synthesis of Co and Ni decorated with chemically deposited Pt as electrocatalysts for oxygen reduction reaction

    Energy Technology Data Exchange (ETDEWEB)

    Flores-Rojas, E.; Cabañas-Moreno, J.G. [Programa de Nanociencias y Nanotecnología, Centro de Investigación y de Estudios Avanzados, CINVESTAV-IPN, Av. Instituto Politécnico Nacional 2508, Col. Zacatenco, 07360 Mexico City (Mexico); Pérez-Robles, J.F. [Programa de Nanociencias y Nanotecnología, Centro de Investigación y de Estudios Avanzados, CINVESTAV-IPN, Av. Instituto Politécnico Nacional 2508, Col. Zacatenco, 07360 Mexico City (Mexico); Dpto. Ciencia de los Materiales, CINVESTAV-IPN Unidad Queretaro, Libramiento Norponiente No. 2000 Fracc. Real de Juriquilla, 76230, Queretaro (Mexico); Solorza-Feria, O., E-mail: osolorza@cinvestav.mx [Programa de Nanociencias y Nanotecnología, Centro de Investigación y de Estudios Avanzados, CINVESTAV-IPN, Av. Instituto Politécnico Nacional 2508, Col. Zacatenco, 07360 Mexico City (Mexico); Depto. Química, CINVESTAV-IPN, 07360, México City (Mexico)

    2016-11-01

    High energy milling in combination with galvanic displacement were used for the preparation of bimetallic nanocatalysts. Co and Ni monometallic powders milled for 30 and 20 h, respectively were both produced in air atmosphere and used as precursors for the preparation of M-Pt (M = Co,Ni) compounds. Nanosized monometallic powders were physically supported on Vulcan carbon, and covered with 20 wt%Pt through a Galvanic Displacement Reaction (GDR) to produce Co-20Pt/C and Ni-20Pt/C electrocatalysts. XRD was used for phase identification on milled powders and for demonstrating structural transformations of Co powders during milling. Results on unmilled metallic Co powder show a predominant HCP structure modifying to a FCC structure after milling. Ni powders maintain their same FCC structure. Energy Dispersive X-Ray Spectometry (EDX) was used for chemical composition analysis on milled powders at several milling times. Scanning Transmission Electron Microscopy (STEM) show the formation of heterogeneous particle with ∼10 nm in size for both electrocatalysts. The electrocatalytic activity was evaluated by Cyclic Voltammetry (CV) and steady state Rotating Disk Electrode (RDE) for the Oxygen Reduction Reaction (ORR) in 0.1 M HClO{sub 4}. The kinetic parameters on Co-20Pt/C conducted to the highest mass activity for the cathodic reaction. - Highlights: • Monometallic powders of Co, and Ni were used as precursors for the preparation of M-Pt (M = Co,Ni) electrocatalysts. • Nanosized monometallic powders were decorated with Pt by a Galvanic Displacement Reaction. • The kinetic parameters on Co-20Pt/C conducted to the highest mass activity for the ORR reaction.

  5. One-step sonochemical syntheses of Ni@Pt core-shell nanoparticles with controlled shape and shell thickness for fuel cell electrocatalyst.

    Science.gov (United States)

    Lee, Eunjik; Jang, Ji-Hoon; Matin, Md Abdul; Kwon, Young-Uk

    2014-01-01

    We demonstrate a facile one-step method to synthesize Ni@Pt core-shell nanoparticles (NPs) with a control over the shape and the Pt-shell thickness of the NPs. By adjusting the relative reactivity of the Pt and Ni reagents in ultrasound-assisted polyol reactions, two Ni@Pt NP samples of the same composition (Ni/Pt=1) and size (3-4 nm) but with different particle shape (octahedral vs. truncated octahedral) and different Pt-shell thicknesses (1-2 vs. 2-3 monolayer) are obtained. The control is achieved by using different Ni reagents, Ni(acac)2 (acac=acetylacetonate) and Ni(hfac)2 (hfac=hexafluoroacetylacetonate). A reaction mechanism that can explain all of the observations is proposed. The Ni@Pt NPs show up to threefold higher mass activity than pure Pt NPs in oxygen reduction reaction. Between the two Ni@Pt NP samples, the one composed of octahedral NPs with the thicker Pt-shell has higher activity than the other. Copyright © 2013 Elsevier B.V. All rights reserved.

  6. Crystal structure of the compounds formed in the systems of Sm-(Pd, Pt)-(Si, Ge) at 20 at.%Sm and 870K

    International Nuclear Information System (INIS)

    Barakatova, Zh.M.; Seropegin, Yu.D.; Bodak, O.I.; Belan, B.D.

    1995-01-01

    Formation of two new compounds at component interaction in Sm(Pd-Pt) -(Si, Ge) ternary structures is determined under 20at.%Sm and 870 K and their crystalline structure is studied. Formation of three new intermetallic compounds is determined and occurrence of SmPd 2 Si compound is proved within Sm-Pd-Si system. Formation of five compounds is determined within Sm-Pt-Si system; periods of crystalline lattice and structure type are determined for Sm 2 Pt 3 Si 5 , S, PtSi 3 structure. Minimal amount of compounds was detected in Sm-Pd-Ge system. Periods of crystalline structure and structure type are determined for two compounds formed in the studied isoconcentrate. 4 refs.; 2 figs

  7. HZSM-5 CATALYST FOR CRACKING PALM OIL TO BIODIESEL: A COMPARATIVE STUDY WITH AND WITHOUT PT AND PD IMPREGNATION

    OpenAIRE

    Agus Budianto; Danawati Hari Prajitno; Achmad Roesyadi; Kusno Budhikarjono

    2014-01-01

    The Needs of healthy environment and green energy poses a great demand for alternative energy. Biofuel is one of the alternative energy products that are environmentally friendly. Biofuel can be made from plant oils, especially palm oil. Cracking of palm oil into biofuel is constrained by the availability of catalysts. Moreover the available catalyst still gives a low yield. This research aims to study the effect of Pt and Pd impregnation into HZSM-5 catalyst on the catalytic properties. Anot...

  8. Au-Pt-Pd-U mineralization in the Coronation Hill-El Sherana region, NT

    International Nuclear Information System (INIS)

    Wyborn, L.

    1992-01-01

    In 1990 BMR's Minerals and Land Use program conducted an geochemical and geophysical survey to provide the best possible basis for estimating the resource potential of the Kakadu Conservation Zone. Combining the old and new data, an integrated model for the deposit types has been developed. Although differing in metal content, all mines and prospects of the Coronation Hill region share similar timing and structural controls, suggesting that they are related to one geochemical system. The presence or absence of U in the Au-Pt-Pd mineralisation appears related to geological differences, primarily in host-rock composition. U-bearing deposits are hosted mainly in carbonaceous shales, although some U is associated with chloritic zones. Deposits lacking U, best developed at Coronation Hill, occur in a broad range of host rocks, including quartz-feldspar porphyry, green tuffaceous shale, diorite, dolomite, and sedimentary breccias. Although seemingly diverse rock types, the common components of these U-poor host units are feldspar and/or carbonate. 1 tab., 3 figs

  9. Anisotropic spin-spin correlations in Mn1/X(111) (X= Pd, Pt, Ag, and Au)

    Science.gov (United States)

    Dos Santos Dias, M.; Staunton, J. B.; Deak, A.; Szunyogh, L.

    2011-02-01

    We present a finite-temperature theory of the anisotropic spin-spin correlations in magnetic metallic monolayers deposited on a suitable substrate. The spins are the local moments set up by the itinerant electrons, and the key concept is the relativistic disordered local moment state, which represents the paramagnetic state of a set of local moments. The spin-spin correlations between these local moments are then extracted using the linear-response formalism. The anisotropy is included in a fully relativistic treatment, based on the Dirac equation, and has a qualitative impact on noncollinear magnetic states by lifting their chiral degeneracy. The theory is applied to Mn monolayers on the hexagonal (111) surfaces of Pd, Pt, Ag, and Au. The presence of competing exchange interactions is highlighted by choosing different substrates, which favor either the row-wise antiferromagnetic state or the chiral triangular Néel state. We correlate the electronic structure with the magnetic properties by comparing filled with partially filled substrate d bands, and low versus high atomic number. The disagreement between theory and experiment for Mn1/Ag(111) is addressed, and the nature of the magnetic domains found experimentally is suggested to be chiral.

  10. HZSM-5 CATALYST FOR CRACKING PALM OIL TO BIODIESEL: A COMPARATIVE STUDY WITH AND WITHOUT PT AND PD IMPREGNATION

    Directory of Open Access Journals (Sweden)

    Agus Budianto

    2014-05-01

    Full Text Available The Needs of healthy environment and green energy poses a great demand for alternative energy. Biofuel is one of the alternative energy products that are environmentally friendly. Biofuel can be made from plant oils, especially palm oil. Cracking of palm oil into biofuel is constrained by the availability of catalysts. Moreover the available catalyst still gives a low yield. This research aims to study the effect of Pt and Pd impregnation into HZSM-5 catalyst on the catalytic properties. Another aim is to obtain the operating conditions of the catalytic cracking process of palm oil into biofuel which gives the highest yield and selectivity, especially for biodiesel and biogasoline fractions. Catalytic cracking process was carried out in a micro fixed bed reactor with diameter of 1 cm and length of 16 cm. The reactor was filled with a catalyst. The results of the study successfully prove that Pt and Pd impregnated into HZSM-5 catalyst can increase the yield and selectivity of biodiesel. Pd and Pt are highly recommended to increase the yield and selectivity of biodiesel.

  11. Lipid solubility of the platinum group metals Pt, Pd and Rh in dependence on the presence of complexing agents

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, Sonja; Menzel, Christoph M.; Stueben, Doris; Taraschewski, Horst; Sures, Bernd

    2003-07-01

    All complexing agents had a significant influence on octanol solubility of PGM. - Investigations on the bioaccumulation of the platinum group metals (PGM) Pt, Pd and Rh in aquatic organisms are of growing interest in environmental research due to the increasing emission of these metals by motor vehicles with catalytic converters. Until now, nothing is known about the possible influence of complexing agents on the bioaccumulation capacity of these precious metals. According to the partition coefficient between 1-octanol and water (P{sub OW}) as a measure of bioaccumulation, in this study a simple shaking method was performed in order to investigate the effects of different complexing agents (L-methionine, thio urea, EDTA, humic substances, bile compounds) on the octanol solubility of the PGM. The results demonstrated a significant influence of all agents used. L-Methionine and thio urea decreased the lipid solubility. In contrast, the presence of EDTA, humic substances and especially bile caused a higher transfer of metals in the octanol phase. For most complexing agents tested, the transfer of Pd to the lipid phase was significantly higher compared with Rh and Pt, except for bile acid where the highest octanol solubility was found for Pt. Recent experimental results on PGM accumulation in zebra mussels confirm a high bioaccumulation of Pd which could be predicted from the lipid solubility.

  12. Lipid solubility of the platinum group metals Pt, Pd and Rh in dependence on the presence of complexing agents

    International Nuclear Information System (INIS)

    Zimmermann, Sonja; Menzel, Christoph M.; Stueben, Doris; Taraschewski, Horst; Sures, Bernd

    2003-01-01

    All complexing agents had a significant influence on octanol solubility of PGM. - Investigations on the bioaccumulation of the platinum group metals (PGM) Pt, Pd and Rh in aquatic organisms are of growing interest in environmental research due to the increasing emission of these metals by motor vehicles with catalytic converters. Until now, nothing is known about the possible influence of complexing agents on the bioaccumulation capacity of these precious metals. According to the partition coefficient between 1-octanol and water (P OW ) as a measure of bioaccumulation, in this study a simple shaking method was performed in order to investigate the effects of different complexing agents (L-methionine, thio urea, EDTA, humic substances, bile compounds) on the octanol solubility of the PGM. The results demonstrated a significant influence of all agents used. L-Methionine and thio urea decreased the lipid solubility. In contrast, the presence of EDTA, humic substances and especially bile caused a higher transfer of metals in the octanol phase. For most complexing agents tested, the transfer of Pd to the lipid phase was significantly higher compared with Rh and Pt, except for bile acid where the highest octanol solubility was found for Pt. Recent experimental results on PGM accumulation in zebra mussels confirm a high bioaccumulation of Pd which could be predicted from the lipid solubility

  13. Catalytic hydrogenation of CO2 over Pt- and Ni-doped graphene: A comparative DFT study.

    Science.gov (United States)

    Esrafili, Mehdi D; Sharifi, Fahimeh; Dinparast, Leila

    2017-10-01

    Today, the global greenhouse effect of carbon dioxide (CO 2 ) is a serious environmental problem. Therefore, developing efficient methods for CO 2 capturing and conversion to valuable chemicals is a great challenge. The aim of the present study is to investigate the catalytic activity of Pt- or Ni-doped graphene for the hydrogenation of CO 2 by a hydrogen molecule. To gain a deeper insight into the catalytic mechanism of this reaction, the reliable density functional theory calculations are performed. The adsorption energies, geometric parameters, reaction barriers, and thermodynamic properties are calculated using the M06-2X density functional. Two reaction mechanisms are proposed for the hydrogenation of CO 2 . In the bimolecular mechanism, the reaction proceeds in two steps, initiating by the co-adsorption of CO 2 and H 2 molecules over the surface, followed by the formation of a OCOH intermediate by the transfer of H atom of H 2 toward O atom of CO 2 . In the next step, formic acid is produced as a favorable product with the formation of CH bond. In our proposed termolecular mechanism, however, H 2 molecule is directly activated by the two pre-adsorbed CO 2 molecules. The predicted activation energy for the formation of the OCOH intermediate in the bimolecular mechanism is 20.8 and 47.9kcalmol -1 over Pt- and Ni-doped graphene, respectively. On the contrary, the formation of the first formic acid in the termolecular mechanism is found as the rate-determining step over these surfaces, with an activation energy of 28.8 and 45.5kcal/mol. Our findings demonstrate that compared to the Ni-doped graphene, the Pt-doped surface has a relatively higher catalytic activity towards the CO 2 reduction. These theoretical results could be useful in practical applications for removal and transformation of CO 2 to value-added chemical products. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Synthesis and structure of Sr{sub 2}Pd{sub 2}In and Sr{sub 2}Pt{sub 2}In

    Energy Technology Data Exchange (ETDEWEB)

    Muts, I. [Inst. fuer Anorganische und Analytische Chemie, Univ. Muenster (Germany); Inorganic Chemistry Dept., Ivan Franko National Univ. of Lviv (Ukraine); Nilges, T.; Rodewald, U.C.; Poettgen, R. [Inst. fuer Anorganische und Analytische Chemie, Univ. Muenster (Germany); Zaremba, V.I. [Inorganic Chemistry Dept., Ivan Franko National Univ. of Lviv (Ukraine)

    2007-12-15

    The new intermetallic compounds Sr{sub 2}Pd{sub 2}In and Sr{sub 2}Pt{sub 2}In were synthesized from the elements in sealed tantalum tubes in a water-cooled sample chamber of an induction furnace. Both indides crystallize with the HT-Pr{sub 2}Co{sub 2}Al-type structure: C2/c, a = 1048.7(2), b = 603.5(2), c = 830.6(1) pm. {beta} = 103.68(2) , wR2 = 0.0492, 743 F{sup 2} values for Sr{sub 2}Pd{sub 2}In; a = 1026.8(2), b = 599.0(1), c = 830.3(2) pm, {beta} = 103.17(1) , wR2 = 0.0666, 885 F{sup 2} values for Sr{sub 2}Pt{sub 2}In with 25 variables per refinement. The shortest interatomic distances occur for the Pd-In (Pt-In) and Pd-Pd (Pt-Pt) contacts. The strontium atoms are embedded in complex three-dimensional polyanionic networks of compositions [Pd{sub 2}In] and [Pt{sub 2}In]. (orig.)

  15. One-pot ionic liquid-assisted synthesis of highly dispersed PtPd nanoparticles/reduced graphene oxide composites for nonenzymatic glucose detection.

    Science.gov (United States)

    Li, Mian; Bo, Xiangjie; Zhang, Yufan; Han, Ce; Guo, Liping

    2014-06-15

    A series of highly dispersed bimetallic PtPd alloy nanoparticles (NPs) anchored on reduced graphene oxide (RGO) have been synthesized with the assistance of ionic liquid (IL: [VEIM]BF4). Different ratios of (PtCl6)(2-) and (PdCl4)(2-) ions were firstly attached to IL functionalized graphene oxide (GO) sheets in ethylene glycol (EG), and then the encased metal ions and graphene oxide sheets were reduced simultaneously by EG with the assistance of microwave. The characterization results of scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and X-ray diffraction (XRD) demonstrate that PtPd alloy NPs with small particle sizes are uniformly dispersed on RGO. Electrochemical measurements reveal that PtPd-IL-RGO modified electrode can directly catalyze glucose oxidation and display enhanced current response compared with PtPd-RGO (such as: a response time within 3s, a linear range from 0.1 to 22 mM at 0 V, good reproducibility, considerable stability, and excellent anti-interference to electroactive molecules and Cl(-)). The superior catalytic activity and selectivity make PtPd-IL-RGO nanomaterials very promising for applications in direct detection of glucose. Copyright © 2014 Elsevier B.V. All rights reserved.

  16. A microwave assisted one-pot route synthesis of bimetallic PtPd alloy cubic nanocomposites and their catalytic reduction for 4-nitrophenol

    Science.gov (United States)

    Zhang, Jian; Gan, Wei; Fu, Xucheng; Hao, Hequn

    2017-10-01

    We herein report a simple, rapid, and eco-friendly chemical route to the one-pot synthesis of bimetallic PtPd alloy cubic nanocomposites under microwave irradiation. During this process, water was employed as an environmentally benign solvent, while dimethylformamide served as a mild reducing agent, and polyvinylpyrrolidone was used as both a dispersant and a stabilizer. The structure, morphology, and composition of the resulting alloy nanocomposites were examined by x-ray diffraction, transmission electron microscopy, and energy dispersive x-ray spectroscopy. A detailed study was then carried out into the catalytic activity of the PtPd nanocomposites with a Pt:Pd molar ratio of 50:50 in the reduction of 4-nitrophenol (4-NP) by sodium borohydride as a model reaction. Compared with pristine Pt and Pd monometallic nanoparticles (PtNPs and PdNPs), the bimetallic PtPd alloy nanocomposites exhibited enhanced catalytic activities and were readily recyclable in the reduction of 4-NP due to synergistic effects.

  17. Electrochemical hydrogen storage in ZrCrNiPd{sub x} alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz, F.C. [Centro Atomico Bariloche (CAB), Comision Nacional de Energia Atomica (CNEA), C. P. 8400, S. C. de Bariloche (RN) (Argentina); CONICET Consejo Nacional de Investigaciones Cientificas y Tecnicas, Av. Rivadavia 1917, C1033AAJ, Ciudad de Buenos Aires (Argentina); Peretti, H.A. [Centro Atomico Bariloche (CAB), Comision Nacional de Energia Atomica (CNEA), C. P. 8400, S. C. de Bariloche (RN) (Argentina); Instituto Balseiro, Universidad Nacional de Cuyo, C. P. 8400, S. C. de Bariloche (RN) (Argentina); Visintin, A. [CONICET Consejo Nacional de Investigaciones Cientificas y Tecnicas, Av. Rivadavia 1917, C1033AAJ, Ciudad de Buenos Aires (Argentina); Instituto de Investigaciones Fisicoquimicas, Teoricas y Aplicadas, Universidad Nacional de La Plata, Suc. 4, C.C.: 16/Comision de Investigaciones Cientificas Provincia de Buenos Aires (C.I.C.), CP: 1900, La Plata (Argentina)

    2010-06-15

    The consumption of rechargeable batteries at worldwide level has increased constantly in the last years, mainly due to the use of portable devices such as cellular phones, digital cameras, computers, music and video reproducers, etc. Nickel Metal Hydride (NiMH) is a rechargeable battery system widely used in these devices, also including the most of electrical and hybrid vehicles (EV and HEV). The study of hydride forming alloys is fundamental for its use as negative electrode component in NiMH batteries. In previous works, the electrocatalytic effect of Pd element addition to the electrode, in powder form and by means of electroless technique, has been studied. In this work, AB{sub 2}-type alloys are studied, in which Pd is incorporated to the structure by re-melting inside an arc furnace. The base alloy composition is ZrCrNi, and the composition of the elaborated compounds is ZrCrNiPd{sub x} (x = 0.095 and 0.19). The effect of the composition modification on these materials on properties such as electrochemical discharge capacity, activation and high rate dischargeability (HRD) is analyzed. (author)

  18. Hydrogenation of tetralin in the presence of dibenzothiophene and quinoline on Pt-Pd/SiO{sub 2}-Al{sub 2}O{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez, O.Y.; Yu, Y.; Jentys, A.; Lercher, J.A. [Technische Univ. Muenchen, Garching (Germany). Dept. of Chemistry and Catalysis Research Center

    2012-07-01

    Three Pt-Pd catalysts with 0.3 and 0.5 wt.% of Pt and Pd, respectively, were supported on amorphous silica alumina with Al{sub 2}O{sub 3}:SiO{sub 2} wt.% ratios of 20:80, 30:70 and 55:45. The materials were characterized by physisorption of N{sub 2}, TEM, X-ray absorption spectroscopy and adsorption of pyridine and CO followed by IR spectroscopy. The EXAFS fitting and IR characterization showed that bimodal distributions of monometallic Pd and bimetallic Pt-Pd particles. The bimetallic particles in all catalysts have a Pt-rich core and a Pd-rich shell. However, the degree of alloying and proportion of exposed Pt increases with increasing concentration of Lewis acid sites (LAS) in the support, probably because the LAS are good anchoring sites for Pt species. The activity of the catalysts for the hydrogenation of tetralin in the presence of DBT and quinoline, and the corresponding selectivity to cis-decalin increase with the proportion of exposed Pt. Therefore, in the presence of DBT and quinoline the morphology of bimetallic clusters is the parameter determining its hydrogenation performance. (orig.)

  19. PtNi Alloy Cocatalyst Modification of Eosin Y-Sensitized g-C3N4/GO Hybrid for Efficient Visible-Light Photocatalytic Hydrogen Evolution.

    Science.gov (United States)

    Wang, Peng; Zong, Lanlan; Guan, Zhongjie; Li, Qiuye; Yang, Jianjun

    2018-02-02

    An economic and effective Pt-based alloy cocatalyst has attracted considerable attention due to their excellent catalytic activity and reducing Pt usage. In this study, PtNi alloy cocatalyst was successfully decorated on the g-C 3 N 4 /GO hybrid photocatalyst via a facile chemical reduction method. The Eosin Y-sensitized g-C 3 N 4 /PtNi/GO-0.5% composite photocatalyst yields about 1.54 and 1178 times higher hydrogen evolution rate than the Eosin Y-sensitized g-C 3 N 4 /Pt/GO-0.5% and g-C 3 N 4 /Ni/GO-0.5% samples, respectively. Mechanism of enhanced performance for the g-C 3 N 4 /PtNi/GO composite was also investigated by different characterization, such as photoluminescence, transient photocurrent response, and TEM. These results indicated that enhanced charge separation efficiency and more reactive sites are responsible for the improved hydrogen evolution performance due to the positive synergetic effect between Pt and Ni. This study suggests that PtNi alloy can be used as an economic and effective cocatalyst for hydrogen evolution reaction. Graphical abstract A significant enhancement of photocatalytic H 2 evolution is realized over the Eosin Y-sensitized g-C 3 N 4 /PtNi/GO composite with PtNi alloy as an efficient cocatalyst.

  20. Ionic-liquid-assisted synthesis of core-shell RuNi@Pt nanoparticles on multiwall carbon nanotubes for methanol oxidation

    Science.gov (United States)

    Kakati, Nitul; Yoon, Young Soo

    2016-01-01

    Core-shell RuNi@Pt nanoparticles were synthesized on multiwall carbon nanotubes by using an ionic-liquid-assisted polyol synthesis method. The catalysts were characterized by using transmission electron microscopy. The synthesized catalysts were very active towards electrocatalytic oxidation of methanol. The catalytic activities were found to increase with decreasing Pt content on the shells of the nanoparticles. The electrocatalytic activities of the RuNi@Pt/MWCNTs were higher than those of PtRuNi/MWCNTs with higher amounts of Pt.

  1. CO Sensing Performance of a Micro Thermoelectric Gas Sensor with AuPtPd/SnO2 Catalyst and Effects of a Double Catalyst Structure with Pt/α-Al2O3

    Directory of Open Access Journals (Sweden)

    Tomoyo Goto

    2015-12-01

    Full Text Available The CO sensing properties of a micro thermoelectric gas sensor (micro-TGS with a double AuPtPd/SnO2 and Pt/α-Al2O3 catalyst were investigated. While several nanometer sized Pt and Pd particles were uniformly dispersed on SnO2, the Au particles were aggregated as particles measuring >10 nm in diameter. In situ diffuse reflectance Fourier transform Infrared spectroscopy (DRIFT analysis of the catalyst showed a CO adsorption peak on Pt and Pd, but no clear peak corresponding to the interaction between CO and Au was detected. Up to 200 °C, CO combustion was more temperature dependent than that of H2, while H2 combustion was activated by repeated exposure to H2 gas during the periodic gas test. Selective CO sensing of the micro-TGS against H2 was attempted using a double catalyst structure with 0.3–30 wt% Pt/α-Al2O3 as a counterpart combustion catalyst. The sensor output of the micro-TGS decreased with increasing Pt content in the Pt/α-Al2O3 catalyst, by cancelling out the combustion heat from the AuPtPd/SnO2 catalyst. In addition, the AuPtPd/SnO2 and 0.3 wt% Pt/α-Al2O3 double catalyst sensor showed good and selective CO detection. We therefore demonstrated that our micro-TGS with double catalyst structure is useful for controlling the gas selectivity of CO against H2.

  2. CO Sensing Performance of a Micro Thermoelectric Gas Sensor with AuPtPd/SnO2 Catalyst and Effects of a Double Catalyst Structure with Pt/α-Al2O3

    Science.gov (United States)

    Goto, Tomoyo; Itoh, Toshio; Akamatsu, Takafumi; Shin, Woosuck

    2015-01-01

    The CO sensing properties of a micro thermoelectric gas sensor (micro-TGS) with a double AuPtPd/SnO2 and Pt/α-Al2O3 catalyst were investigated. While several nanometer sized Pt and Pd particles were uniformly dispersed on SnO2, the Au particles were aggregated as particles measuring >10 nm in diameter. In situ diffuse reflectance Fourier transform Infrared spectroscopy (DRIFT) analysis of the catalyst showed a CO adsorption peak on Pt and Pd, but no clear peak corresponding to the interaction between CO and Au was detected. Up to 200 °C, CO combustion was more temperature dependent than that of H2, while H2 combustion was activated by repeated exposure to H2 gas during the periodic gas test. Selective CO sensing of the micro-TGS against H2 was attempted using a double catalyst structure with 0.3–30 wt% Pt/α-Al2O3 as a counterpart combustion catalyst. The sensor output of the micro-TGS decreased with increasing Pt content in the Pt/α-Al2O3 catalyst, by cancelling out the combustion heat from the AuPtPd/SnO2 catalyst. In addition, the AuPtPd/SnO2 and 0.3 wt% Pt/α-Al2O3 double catalyst sensor showed good and selective CO detection. We therefore demonstrated that our micro-TGS with double catalyst structure is useful for controlling the gas selectivity of CO against H2. PMID:26694397

  3. Titania Supported Pt and Pt/Pd Nano-particle Catalysts for the Oxidation of Sulfur Dioxide

    DEFF Research Database (Denmark)

    Koutsopoulos, Sotiris; Johannessen, Tue; Eriksen, Kim Michael

    2006-01-01

    Several types of titania (anatase) were used as supports for pure platinum and Pt–Pd bimetallic alloy catalysts. The preparation methods, normal wet impregnation technique and flame aerosol synthesis, obtained metal loadings of 2% by weight. The prepared catalysts were tested for SO2 oxidation...... activity at atmospheric pressure in the temperature range 250–600 °C. The SO2 to SO3 conversion efficiency of the Pt–Pd alloy was significantly higher than that of the individual metals. The effects of the preparation method and the titania type used on the properties and activity of the resulting catalyst...

  4. Exploring the metal coordination properties of the pyrimidine part of purine nucleobases: isomerization reactions in heteronuclear Pt(II)/Pd(II) of 9-methyladenine.

    Science.gov (United States)

    Ibáñez, Susana; Albertí, Francisca M; Sanz Miguel, Pablo J; Lippert, Bernhard

    2011-10-17

    The synthesis and characterization of three heteronuclear Pt(2)Pd(2) (4, 5) and PtPd(2) (6) complexes of the model nucleobase 9-methyladenine (9-MeA) is reported. The compounds were prepared by reacting [Pt(NH(3))(3)(9-MeA-N7)](ClO(4))(2) (1) with [Pd(en)(H(2)O)(2)](ClO(4))(2) at different ratios r between Pt and Pd, with the goal to probe Pd(II) binding to any of the three available nitrogen atoms, N1, N3, N6 or combinations thereof. Pd(II) coordination occurs at N1 and at the deprotonated N6 positions, yet not at N3. 4 and 5 are isomers of [{(en)Pd}(2){N1,N6-9-MeA(-)-N7)Pt(NH(3))(3)}(2)](ClO(4))(6)·nH(2)O, with a head-head orientation of the two bridging 9-MeA(-) ligands in 4 and a head-tail orientation in 5. 6 is [{(en)Pd}(2)(OH)(N1,N6-9MeA(-)-N7)Pt(NH(3))(3)](ClO(4))(4)·4H(2)O, hence a condensation product between [Pt(NH(3))(3)(9-MeA-N7)](2+) and a μ-OH bridged dinuclear (en)Pd-OH-Pd(en) unit, which connects the N1 and N6 positions of 9-MeA(-) in an intramolecular fashion. 4 and 5, which slowly interconvert in aqueous solution, display distinct structural differences such as significantly different intramolecular Pd···Pd contacts (3.124 0(16) Å in 4; 2.986 6(14) Å in 5), among others. Binding of (en)Pd(II) to the exocyclic N6 atom in 4 and 5 is accompanied by a large movement of Pd(II) out of the 9-MeA(-) plane and a trend to a further shortening of the C6-N6 bond as compared to free 9-MeA. The packing patterns of 4 and 5 reveal substantial anion-π interactions.

  5. Alloys at low Ni-realise. Pd-Ni coatings on copper; Depositi galvanici decorativi a basso rilascio di nichel

    Energy Technology Data Exchange (ETDEWEB)

    Moretti, G.; Gambirasi, A.; Stangherlin, F. [Venice Univ., Venice (Italy). Dipt. di Chimica; Capobianco, G. [Padua Univ., Padua (Italy). Dipt. di Chimica Fisica; Gajo, M. [ELSY Research, Treviso (Italy)

    1999-06-01

    The paper shows the results of the following analysis: samples coated with an alloy of Palladium and Nickel were electrochemically tested in an alkaline solution. The coated samples were also tested in an artificial seawater solution, using the European 1811 test method. The electrochemical tests and artificial sweat tests confirmed the good behaviour of the coating. It is possible to affirm that the Pd-Ni coating is in accordance with the law proposed by the European Committee for the Standardization (CEN) given that the nickel release was lower than 0.5 mg/cm{sup 2}/week. [Italian] In questo articolo vengono riportati i risultati della verifica del comportamento a corrosione di depositi galvanici di una lega Pd-Ni (90-100) in una soluzione standard alcalina e in sudore sintetico. I depositi sottili sono stati effettuati su rame ramato elettroliticamente a due spessori. Il test del sudore sintetico ha dimostrato che gli strati esaminati, anche quelli molto sottili, sono a bassissimo rilascio di Ni, inferiore di circa un ordine di grandezza rispetto a quello indicato dalle normative vigenti.

  6. Control of magnetic anisotropy field of (001) oriented L1{sub 0}-Fe(Pd{sub x}Pt{sub 1-x}) films for MRAM application

    Energy Technology Data Exchange (ETDEWEB)

    Yoshimura, Satoru; Omiya, Shogo; Egawa, Genta; Saito, Hitoshi [Center for Geo-environmental Science, Faculty of Engineering and Resource Science, Akita University, Tegatagakuen-machi 1-1, Akita, 010-8502 (Japan); Bai Jianmin, E-mail: syoshi@gipc.akita-u.ac.jp [Key Laboratory for Magnetism and Magnetic Materials of the Ministry of Education, Lanzhou University, TianShui Road, S 222, LanZhou, GanSu, 730000 (China)

    2011-01-01

    L1{sub 0}-Fe(Pd,Pt) films which are expected to have tunable perpendicular magnetic anisotropy and lower ordering temperature compared with the L1{sub 0}-FePt films were fabricated and investigated in order to realize high-performance Magnetic Random Access Memory (MRAM) with spin-transfer magnetization switching method and Magnetic Domain-Wall Racetrack Memory with current-driven domain wall motion. The main results are as follows: (1) The long-range chemical order degree S for the L1{sub 0}-Fe(Pd,Pt) films with the optimized thermal treatment temperature fabricated on MgO(001) substrate was about 0.8. (2) The perpendicular coercive force and magnetic anisotropy field for the L1{sub 0}-FePd film with the thermal treatment temperature of 600 {sup 0}C were 300 Oe and 14 kOe respectively, whereas the L1{sub 0}-FePt film with the thermal treatment temperature of 800 {sup 0}C were 2000 Oe and 102 kOe, respectively. (3) The optimized ordering temperature to obtain L1{sub 0} single phase decreased continuously from 800{sup 0}C to 600{sup 0}C with the increasing Pd content for the Fe(Pd,Pt) films. (4) The perpendicular magnetic anisotropy field for the L1{sub 0}-Fe(Pd,Pt) films decreased continuously from 102 kOe to 14 kOe with the increasing Pd content. It is found that the Fe(Pd,Pd) films which have tunable perpendicular magnetic anisotropy field is one of suitable ferromagnetic material for high-performance magnetic recording devices.

  7. Porous platinum nanoparticles and PdPt nanocages for use in an ultrasensitive immunoelectrode for the simultaneous determination of the tumor markers CEA and AFP

    International Nuclear Information System (INIS)

    Liu, Na; Feng, Feng; Liu, Zhimin; Ma, Zhanfang

    2015-01-01

    We describe the use of porous platinum nanoparticles (pPt NPs) and PdPt nanocages (PdPt NCs) in an electrochemical immunoassay for two tumor markers (CEA and AFP) directly in serum and with enhanced detection performance. The pPt NPs possess a high specific surface area and electrical conductivity, while the PdPt NCs display excellent catalytic property and high loading capacity. The PdPt NCs were labeled with anti-CEA and thionine, and the PdPt NCs were labeled with anti-AFP and ferrocene. The resulting electrode displayed a large decrease of the anodic peak current and an increase of cathodic peak current for hydrogen peroxide (H 2 O 2 ). The dual square wave voltammetric immunoassay was performed at −0.1 V (for CEA) and +0.6 V (for AFP) after exposure to a sample containing CEA and AFP and in the presence of H 2 O 2 . CEA can be detected in the 0.05 to 200 ng mL −1 concentration range and AFP between 0.03 and 100 ng mL −1 . The limits of detection are 1.4 pg mL −1 for CEA and 1 pg mL −1 for AFP (at an SNR of 3). The sensitivity of the method (expressed as slope vs. concentration) is better by a factor of 4.6 to 100 compared to conventional electrochemical immunoassays. Analytical data obtained with diluted serum samples were in good agreement with reference values obtained via a standard ELISA. Negligible cross-reactivity is found between CEA and AFP. In our opinion, this approach paves the way for developing other kinds of electrochemical immunosensors based on the use of pPt NPs and PdPt NCs as materials for designing new electrode interfaces. (author)

  8. Thermal cyclic test for Sn-4Ag-0.5Cu solders on high P Ni/Au and Ni/Pd/Au surface finishes

    Directory of Open Access Journals (Sweden)

    M.A. Azmah Hanim

    2015-12-01

    Full Text Available In electronic packaging, the reliability of the interconnection changes with the surface finish and the type of solders being used. Thermal cycling is one method of reliability assessment. In thermal cycling experiments, the strain state is simplified by soldering together regular shaped pieces of materials with different coefficients of thermal expansion and exposing the joint to repeated fluctuations of temperature within a certain range. Thus, this study focuses on the intermetallic evolution of Sn-4Ag-0.5Cu on Ni/Au and Ni/Pd/Au surface finishes with thermal cycling up to 1000 cycles with the range of temperature varying from 10 to 80 °C. Sandwich samples were prepared by placing solder balls of Sn-4Ag-0.5Cu between two substrates of two different surface finishes: Ni/Au and Ni/Pd/Au. Optical microscope and FESEM (Field emission scanning electron microscope were used to analyze the samples. From the study, it was observed that the intermetallic changes from (Cu, Ni6Sn5 to (Ni, Cu3Sn4 after 1000 thermal cycles for Ni/Au. These changes promote the formation of cracks at the solder joint because of the different mechanical properties between Ni-Sn based intermetallic and Cu-Sn intermetallics. However, for the Ni/Pd/Au surface finishes, no cracks formed after thermal cycling up to 1000 cycles. This shows that the reliability of the solder joint is higher for Ni/Pd/Au surface finishes in this experiment. Based on these results, it can be concluded that the reliability of the Ni/Pd/Au surface finishes with Sn-4Ag-0.5Cu solders is higher within the given condition of this research.

  9. Kinetic modelling of the isomerization of N-Hexane using bifunctional Pt-Ni-MOR catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Brito, K.D.; Sousa, B.V.; Rodrigues, M.G.F.; Alves, J.J.N. [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academica de Engenharia Quimica], E-mail: jailson@deq.ufcg.edu.br

    2008-01-15

    The objective of the present work is to realize the kinetic modelling regarding deactivation of Pt-Ni catalysts present in mordenite zeolite and monitor the isomerization reaction of n-hexane. The catalysts have been prepared with different metal ratios for comparison in terms of ion exchange and characterization by the XRD technique, in order to correlate the catalytic behavior of the material with its properties. The catalysts were also evaluated during the isomerization reaction of n-hexane. According to the XRD analyses it was observed that the incorporation of the metals Pt and Ni in the structure of the mordenite zeolite did not change the X-Ray diffractograms after the ionic exchange process and calcination of the catalysts. Based on the results of the catalytic investigation, a kinetic model was proposed to deactivate the catalysts. By means of two correlations, the deactivation parameters were determined, allowing establishing the profile of the activity at any time, when the composition of one of the metals is known. According to the results of this work, there might be the possibility that the proposed model of deactivation is a result of coke formation. (author)

  10. Incorporation of metals (Pt-Ni-Ru) in the zeolite ZSM-5 through ion exchange competitive: synthesis and characterization

    International Nuclear Information System (INIS)

    Barbosa, A.S.; Rodrigues, M.G.F.

    2012-01-01

    Zeolites are very important materials due to their high specific surface area. Moreover, they are suitable for use as catalyst support. Noble metals supported on zeolites have been widely used as catalysts in the petrochemical industry. This paper was prepared and characterized, a powder aiming its use in heterogeneous catalysis. Support was used as ZSM-5 and the method of incorporation of the metals (Ru-PtNi) was competitive ion exchange. The materials (ZSM-5 and Pt-Ni-Ru/ZSM-5) were characterized by spectrophotometry Energy Dispersive X-ray (EDX), X-Ray Diffraction (XRD) and nitrogen physisorption (BET method). Based on the results of X-ray diffraction, it is possible to demonstrate the preservation of the structure of zeolite ZSM-5 after the competitive ion Exchange with metals (Ru-Pt-Ni) and calcination. The dispersion of metals on ZSM-5 did not change the textural characteristics of the zeolite. (author)

  11. Studies of the development and characterization of the Cu-Ni-Pt and Cu-Ni-Sn alloys for electro-electronic uses

    International Nuclear Information System (INIS)

    Silva, Luis Carlos Elias da

    2006-01-01

    The Cu and its alloys have different applications in the owed modern society the excellent electric properties, thermal conductivity, resistance to the corrosion and other properties. These applications can be in valves, pipes, pots for absorption of solar energy, radiators for automobiles, current driver, electronic driver, thermostats elements and structural parts of nuclear reactors, as, for example, reels for field toroidal for a reactor of nuclear coalition. The alloys used in nuclear reactors, we can highlight Cu-Be, Cu-Sn and Cu-Pt. Ni and Co frequently are added to the Cu alloys so that the solubility is moved for temperatures more elevated with relationship to the binary systems of Cu-Sn and Cu-Pt. The addition of Ni-Pt or Ni-Sn to the Cu in the same or inferior percentages to 1,5% plus thermomechanical treatments changes the properties of the copper. We studied the electric conductivity and hardness Vickers of the Cu-Ni-Pt and Cu-Ni-Sn and compared with the electrolytic Cu. In the proposed flowcharts, breaking of the obtaining of the ingot, we proceeded with thermo mechanical treatments. (author)

  12. Microwave-assisted pechini synthesis of Pd-Ni nanocatalyst for ethanol electro-oxidation in alkaline medium

    CSIR Research Space (South Africa)

    Rohwer, M

    2012-11-01

    Full Text Available counterparts. For these reasons, electrocatalysts for the oxidation of ethanol in alkaline medium deserve special attention. Pd and its alloys, e.g. Pd-Ni, have been investigated widely as catalysts for ethanol electro-oxidation, and form the subject...

  13. Towards Highly Performing and Stable PtNi Catalysts in Polymer Electrolyte Fuel Cells for Automotive Application

    Directory of Open Access Journals (Sweden)

    Sabrina C. Zignani

    2017-03-01

    Full Text Available In order to help the introduction on the automotive market of polymer electrolyte fuel cells (PEFCs, it is mandatory to develop highly performing and stable catalysts. The main objective of this work is to investigate PtNi/C catalysts in a PEFC under low relative humidity and pressure conditions, more representative of automotive applications. Carbon supported PtNi nanoparticles were prepared by reduction of metal precursors with formic acid and successive thermal and leaching treatments. The effect of the chemical composition, structure and surface characteristics of the synthesized samples on their electrochemical behavior was investigated. The catalyst characterized by a larger Pt content (Pt3Ni2/C presented the highest catalytic activity (lower potential losses in the activation region among the synthesized bimetallic PtNi catalysts and the commercial Pt/C, used as the reference material, after testing at high temperature (95 °C and low humidification (50% conditions for automotive applications, showing a cell potential (ohmic drop-free of 0.82 V at 500 mA·cm−2. In order to assess the electro-catalysts stability, accelerated degradation tests were carried out by cycling the cell potential between 0.6 V and 1.2 V. By comparing the electrochemical and physico-chemical parameters at the beginning of life (BoL and end of life (EoL, it was demonstrated that the Pt1Ni1/C catalyst was the most stable among the catalyst series, with only a 2% loss of voltage at 200 mA·cm−2 and 12.5% at 950 mA·cm−2. However, further improvements are needed to produce durable catalysts.

  14. Strain field due to transition metal impurities in Ni and Pd

    Indian Academy of Sciences (India)

    1 2. 28 1 π. ¯h2r3 2. dH mr5. (44). In eqs (41) to (44), ∆φFE(r), ∆φc(r) and ∆φb(r) are impurity induced changes in the po- tential due to free electron, s–d hybridization and d-bandwidth contributions respectively. 3. Calculations and results. The above formalism is used to calculate the atomic displacements in Ni and Pd dilute.

  15. High Temperature Oxidation Behavior of gamma-Ni+gamma'-Ni3Al Alloys and Coatings Modified with Pt and Reactive Elements

    Energy Technology Data Exchange (ETDEWEB)

    Mu, Nan [Iowa State Univ., Ames, IA (United States)

    2007-12-01

    Materials for high-pressure turbine blades must be able to operate in the high-temperature gases (above 1000 C) emerging from the combustion chamber. Accordingly, the development of nickel-based superalloys has been constantly motivated by the need to have improved engine efficiency, reliability and service lifetime under the harsh conditions imposed by the turbine environment. However, the melting point of nickel (1455 C) provides a natural ceiling for the temperature capability of nickel-based superalloys. Thus, surface-engineered turbine components with modified diffusion coatings and overlay coatings are used. Theses coatings are capable of forming a compact and adherent oxide scale, which greatly impedes the further transport of reactants between the high-temperature gases and the underlying metal and thus reducing attack by the atmosphere. Typically, these coatings contain β-NiAl as a principal constituent phase in order to have sufficient aluminum content to form an Al2O3 scale at elevated temperatures. The drawbacks to the currently-used {beta}-based coatings, such as phase instabilities, associated stresses induced by such phase instabilities, and extensive coating/substrate interdiffusion, are major motivations in this study to seek next-generation coatings. The high-temperature oxidation resistance of novel Pt + Hf-modified γ-Ni + γ-Ni3Al-based alloys and coatings were investigated in this study. Both early-stage and 4-days isothermal oxidation behavior of single-phase γ-Ni and γ'-Ni3Al alloys were assessed by examining the weight changes, oxide-scale structures, and elemental concentration profiles through the scales and subsurface alloy regions. It was found that Pt promotes Al2O3 formation by suppressing the NiO growth on both γ-Ni and γ'Ni3Al single-phase alloys. This effect increases with increasing Pt content. Moreover, Pt exhibits this effect even at

  16. Shape memory behavior of high strength NiTiHfPd polycrystalline alloys

    International Nuclear Information System (INIS)

    Karaca, H.E.; Acar, E.; Ded, G.S.; Basaran, B.; Tobe, H.; Noebe, R.D.; Bigelow, G.; Chumlyakov, Y.I.

    2013-01-01

    Systematic characterization of the shape memory properties of a quaternary Ni 45.3 –Ti 29.7 –Hf 20 –Pd 5 (at.%) polycrystalline alloy was performed in compression after selected aging treatments. Precipitation characteristics were revealed by transmission electron microscopy. The effects of aging temperature and time on transformation temperatures, recoverable and residual strains, and temperature and stress hystereses were determined by differential scanning calorimetry, constant-load thermal cycling experiments and isothermal strain cycling (superelasticity) tests. The crystal structure and lattice parameters of the transforming phases were determined from X-ray diffraction analysis. It was revealed that precipitation hardening significantly improved the shape memory properties of the NiTiHfPd alloy. Under optimum aging conditions, shape memory strains of up to 4% under 1 GPa were possible, and superelasticity experiments resulted in full strain recovery without any plastic deformation, even at stress levels as high as 2 GPa. The NiTiHfPd polycrystalline alloy exhibited very high damping capacity/absorbed energy (30–34 J cm −3 ) and work output (30–35 J cm −3 ), which were attributed to the ability to operate at high stress levels without significant plastic deformation and to a high mechanical hysteresis (>900 MPa) at temperatures ranging from 20 °C to 80 °C

  17. Ni2P Makes Application of the PtRu Catalyst Much Stronger in Direct Methanol Fuel Cells.

    Science.gov (United States)

    Chang, Jinfa; Feng, Ligang; Liu, Changpeng; Xing, Wei

    2015-10-12

    PtRu is regarded as the best catalyst for direct methanol fuel cells, but the performance decay resulting from the loss of Ru seriously hinders commercial applications. Herein, we demonstrated that the presence of Ni2 P largely reduces Ru loss, which thus makes the application of PtRu much stronger in direct methanol fuel cells. Outstanding catalytic activity and stability were observed by cyclic voltammetry. Upon integrating the catalyst material into a practical direct methanol fuel cell, the highest maximum power density was achieved on the PtRu-Ni2P/C catalyst among the reference catalysts at different temperatures. A maximum power density of 69.9 mW cm(-2) at 30 °C was obtained on PtRu-Ni2P/C, which is even higher than the power density of the state-of-the-art commercial PtRu catalyst at 70 °C (63.1 mW cm(-2)). Moreover, decay in the performance resulting from Ru loss was greatly reduced owing to the presence of Ni2 P, which is indicative of very promising applications. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Atomic-level Pd-Pt alloying and largely enhanced hydrogen-storage capacity in bimetallic nanoparticles reconstructed from core/shell structure by a process of hydrogen absorption/desorption.

    Science.gov (United States)

    Kobayashi, Hirokazu; Yamauchi, Miho; Kitagawa, Hiroshi; Kubota, Yoshiki; Kato, Kenichi; Takata, Masaki

    2010-04-28

    We have achieved the creation of a solid-solution alloy where Pd and Pt are homogeneously mixed at the atomic level, by a process of hydrogen absorption/desorption as a trigger for core (Pd)/shell (Pt) nanoparticles. The structural change from core/shell to solid solution has been confirmed by in situ powder X-ray diffraction, energy dispersive spectra, solid-state (2)H NMR measurement, and hydrogen pressure-composition isotherms. The successfully obtained Pd-Pt solid-solution nanoparticles with a Pt content of 8-21 atom % had a higher hydrogen-storage capacity than Pd nanoparticles. Moreover, the hydrogen-storage capacity of Pd-Pt solid-solution nanoparticles can be tuned by changing the composition of Pd and Pt.

  19. Heterometallic Pd(II)-Ni(II) complexes with meso-substituted dibenzotetraaza[14]annulene: double C-H bond activation and formation of a rectangular tetradibenzotetraaza[14]annulene.

    Science.gov (United States)

    Khaledi, Hamid; Olmstead, Marilyn M; Fukuda, Takamitsu; Ali, Hapipah Mohd

    2014-11-03

    Three isomeric 2[Pd(II)-Ni(II)] metal complexes, derived from indoleninyl meso-substituted dibenzotetraaza[14]annulene, were synthesized. The resulting dimers feature Ni···Ni or, alternatively, Ni···π interactions in staggered or slipped cofacial structures. A remarkable insertion of palladium into two different C-H bonds yielded a 4[Pd(II)-Ni(II)] rectangular complex with dimensions of 8.73 × 10.38 Å.

  20. Oxidation Kinetics of a NiPtTi High Temperature Shape Memory Alloy

    Science.gov (United States)

    Smialek, James L.; Humphrey, Donald L.; Noebe, Ronald D.

    2007-01-01

    A high temperature shape memory alloy (HTSMA), Ni30Pt50Ti, with an M(sub s) near 600 C, was isothermally oxidized in air for 100 hr over the temperature range of 500 to 900 C. Parabolic kinetics were confirmed by log-log and parabolic plots and showed no indication of fast transient oxidation. The overall behavior could be best described by the Arrhenius relationship: k(sub p) = 1.64 x 10(exp 12)[(-250 kJ/mole)/RT] mg(sup 2)/cm(sup 4)hr. This is about a factor of 4 reduction compared to values measured here for a binary Ni47Ti commercial SMA. The activation energy agreed with most literature values for TiO2 scale growth measured for elemental Ti and other NiTi alloys. Assuming uniform alloy depletion of a 20 mil (0.5 mm) dia. HTSMA wire, approx. 1 percent Ti reduction is predicted after 20,000 hr oxidation at 500 C, but becomes much more serious at higher temperatures.

  1. Comparison between the Oxygen Reduction Reaction Activity of Pd5Ce and Pt5Ce

    DEFF Research Database (Denmark)

    Tripkovic, Vladimir; Zheng, Jian; Rizzi, Gian Andrea

    2015-01-01

    if results on a several-fold activity increase of a series of Pt/rare-earth alloys hold also for Pd rare-earth alloys. Pd5Ce crystallizes in two phases, a so-called low-temperature phase, L-Pd5Ce, which has a cubic symmetry, and a high-temperature phase, H-Pd5Ce, with a hexagonal symmetry. In both cases......, in agreement with DFT results for the L-Pd5Ce phase. Although we did not discover a new promising Pd-based catalyst, we have shown that the activity for oxygen reduction is strongly influenced by the alloy crystal structure. Furthermore, we have qualitatively demonstrated that transformation from H-Pd5Ce to L...

  2. First-principles study on the Ni@Pt12 Ih core-shell nanoparticles: A good catalyst for oxygen reduction reaction

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Zongxian, E-mail: yzx@henannu.edu.cn [College of Physics and Information Engineering, Henan Normal University, Xinxiang, Henan, 453007 (China); Henan Key Laboratory of Photovoltaic Materials, Xinxiang, 453007 (China); Zhang, Yanxing; Wang, Jinlong; Ma, Shuhong [College of Physics and Information Engineering, Henan Normal University, Xinxiang, Henan, 453007 (China)

    2011-08-15

    The adsorption, diffusion and dissociation properties of O{sub 2} on the icosahedron (Ih) Ni@Pt12 core-shell nanoparticle were investigated using the ab initio density functional theory calculations. It is found that, compared with the Pt(111) surface, the Ih Ni@Pt12 core-shell nanoparticle can enhance the adsorption, diffusion and dissociation of O{sub 2}, as well as the adsorption and diffusion of the atomic O (the dissociation product of O{sub 2}), and therefore serve as a good catalyst for oxygen reduction reaction. Our study gives a reasonable theoretical explanation to the high catalytic activity of the Ni@Pt core-shell nanoparticles for the oxygen reduction reaction. -- Highlights: → The Ni core can enhance the stability of the Ih Ni@Pt12 core-shell nanoparticle. → O{sub 2} prefers the top-bridge-top configuration on the Ih Ni@Pt12. → The Ih Ni@Pt12 can enhance the adsorption, diffusion and the dissociation of O{sub 2}. → The Ih Ni@Pt12 can serve as a good catalyst for the oxygen reduction reaction.

  3. A structural study of effects of NiP seed layer on the magnetic properties of CoCrPt/Ti/NiP perpendicular magnetic films

    CERN Document Server

    Sun, C J; Wang, J P; Soo, E W; Noh, D Y; Je, J H; Hwu, Y K

    2003-01-01

    The CoCrPt/Ti/NiP films for perpendicular magnetic recording were studied using X-ray scattering and anomalous X-ray scattering. When the NiP seed layer was used, the long range order of the texture peak of the magnetic film decreased and less Co was associated with this Bragg order. The structural results were consistent with the observed increased coercivity and decreased magnetization due to the increased magnetic grain isolation caused by the presence of NiP seed layer.

  4. Elucidating the Mechanisms Driving the Aging of Porous Hollow PtNi/C Nanoparticles by Means of COadsStripping.

    Science.gov (United States)

    Asset, Tristan; Chattot, Raphael; Drnec, Jakub; Bordet, Pierre; Job, Nathalie; Maillard, Frederic; Dubau, Laetitia

    2017-08-02

    The oxygen reduction reaction (ORR) activity of Pt-alloy electrocatalysts depends on (i) the strain/ligand effects induced by the non-noble metal (3d-transition metal or a rare-earth element) alloyed to Pt, (ii) the orientation of the catalytic surfaces, and (iii) the density of structural defects (SDs) (e.g., vacancies, voids, interconnections). These SDs influence the "generalized" coordination number of Pt atoms, the Pt-alloy lattice parameter, and thus the adsorption strength of the ORR intermediates (O*, OH*, OOH*). Here, we discuss a set of parameters derived from CO ads stripping measurements and the Rietveld refinement of X-ray diffraction (XRD) patterns, aiming to show how the leaching of the non-noble metal and the density of SDs influence the ORR activity of porous hollow PtNi/C nanoparticles (PH-PtNi/C NPs). PH-PtNi/C NPs were aged at T = 353 K in an Ar-saturated 0.1 M HClO 4 electrolyte during 20 000 potential cycles between E = 0.6 and 1.0 V versus the reversible hydrogen electrode, with an intermediate characterization after 5000 cycles. The losses in the ORR specific activity were attributed to the dissolution of Ni atoms (modifying strain/ligand effects) and to the increase of the crystallite size (d XRD ), resulting in a diminution of the density of grain boundaries. In agreement with the Gibbs-Thompson equation, the electrocatalysts that presented larger crystallites (d XRD > 3 nm) were far more stable than the ones with the smallest crystallites (d XRD < 2 nm). We also observed that performing intermediate characterizations (in an O 2 -saturated electrolyte) results in activity losses for the ORR.

  5. UV-Vis-Induced Degradation of Phenol over Magnetic Photocatalysts Modified with Pt, Pd, Cu and Au Nanoparticles

    Directory of Open Access Journals (Sweden)

    Izabela Wysocka

    2018-01-01

    Full Text Available The combination of TiO2 photocatalyst and magnetic oxide nanoparticles enhances the separation and recoverable properties of nanosized TiO2 photocatalyst. Metal-modified (Me = Pd, Au, Pt, Cu TiO2/SiO2@Fe3O4 nanocomposites were prepared by an ultrasonic-assisted sol-gel method. All prepared samples were characterized by X-ray powder diffraction (XRD analysis, Brunauer-Emmett-Teller (BET method, X-ray photoelectron spectroscopy (XPS, scanning transmission electron microscopy (STEM, Mott-Schottky analysis and photoluminescence spectroscopy (PL. Phenol oxidation pathways of magnetic photocatalysts modified with Pt, Pd, Cu and Au nanoparticles proceeded by generation of reactive oxygen species, which oxidized phenol to benzoquinone, hydroquinone and catechol. Benzoquinone and maleic acid were products, which were determined in the hydroquinone oxidation pathway. The highest mineralization rate was observed for Pd-TiO2/SiO2@Fe3O4 and Cu-TiO2/SiO2@Fe3O4 photocatalysts, which produced the highest concentration of catechol during photocatalytic reaction. For Pt-TiO2/SiO2@Fe3O4 nanocomposite, a lack of catechol after 60 min of irradiation resulted in low mineralization rate (CO2 formation. It is proposed that the enhanced photocatalytic activity of palladium and copper-modified photocatalysts is related to an increase in the amount of adsorption sites and efficient charge carrier separation, whereas the keto-enol tautomeric equilibrium retards the rate of phenol photomineralization on Au-TiO2/SiO2@Fe3O4. The magnetization hysteresis loop indicated that the obtained hybrid photocatalyst showed magnetic properties and therefore could be easily separated after treatment process.

  6. Influence of hydrogen on the thermoelectric voltage signal in a Pt/WO x /6 H-SiC/Ni/Pt layered structure

    Science.gov (United States)

    Zuev, V. V.; Grigoriev, S. N.; Fominski, V. Yu.; Volosova, M. A.; Soloviev, A. A.

    2017-09-01

    The possibility of detecting H2 by registering the thermal electromotive force signal, which arises between the surfaces of 6 H-SiC plates with a thickness of 400 μm, is established. The working surface of the plates is modified by deposition of a WO x film and catalytic Pt. An ohmic contact (Ni/Pt) is created on the rear surface of the plate, and this surface is maintained at a stabilized temperature of 350°C. The temperature gradient through the plate thickness arises due to the cooling of the working surface with the air medium. The delivery of H2 into this medium up to a concentration of 2% gives rise to a 15-fold increase in the electric signal, which considerably exceeds the Pt/WO x /SiC/Ni/Pt system's response registered in the usual way by measuring the current-voltage dependence. In this case, an additional power source for the registration of the thermal electromotive force is not required.

  7. Strength of FePd/MgO and FePt/MgO interfaces from first principles

    Science.gov (United States)

    Černý, M.

    2018-04-01

    Cleavage characteristics such as the cleavage energy and the cleavage stress of FePd/MgO and FePt/MgO interfaces are computed from first principles. Considering several possible cleavage planes, the weakest link in these systems is found as the plane with the lowest cleavage stress. This weakest plane is identified in both systems with the interface plane, where the cohesion is reduced by 30% compared to the MgO bulk. Two distinct models of tensile test are employed to verify the results and convergence of computed values with respect to size of the simulation cell is discussed.

  8. Adsorption of NO on the Rh-13, Pd-13, Ir-13, and Pt-13 Clusters: A Density Functional Theory Investigation

    DEFF Research Database (Denmark)

    Piotrowski, Mauricio J.; Piquini, Paulo; Zeng, Zhenhua

    2012-01-01

    of real catalyst devices. In this study, we report a density functional theory study of the adsorption properties of NO on the TM13 (TM = Rh, Pd, Ir, Pt) clusters employing the projected augmented wave method. We found that the interaction of NO with TM13 is much more complex than that for NO/TM(111......). In particular, for low symmetry TM13 clusters, there is a strong rearrangement of the electronic charge density upon NO adsorption and, as a consequence, the adsorption energy shows a very complex dependence even for adsorption sites with the same local effective coordination. We found a strong enhancement...

  9. Determination of Pt, Pd and Rh in Brassica Napus using solid sampling electrothermal vaporization inductively coupled plasma optical emission spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Nischkauer, Winfried [Vienna University of Technology, Institute of Chemical Technologies and Analytics, Division of Instrumental Analytical Chemistry, Getreidemarkt 9/164-IAC, A-1060 Vienna (Austria); Herincs, Esther [Vienna University of Technology, Institute of Chemical Technologies and Analytics, Division of Instrumental Analytical Chemistry, Getreidemarkt 9/164-IAC, A-1060 Vienna (Austria); University of Natural Resources and Life Sciences, Department of Forest and Soil Sciences, Institute of Soil Research, Konrad Lorenz Straße 24, A-3430 Tulln (Austria); Puschenreiter, Markus; Wenzel, Walter [University of Natural Resources and Life Sciences, Department of Forest and Soil Sciences, Institute of Soil Research, Konrad Lorenz Straße 24, A-3430 Tulln (Austria); Limbeck, Andreas, E-mail: A.Limbeck@tuwien.ac.at [Vienna University of Technology, Institute of Chemical Technologies and Analytics, Division of Instrumental Analytical Chemistry, Getreidemarkt 9/164-IAC, A-1060 Vienna (Austria)

    2013-11-01

    Conventional approaches for the analysis of platinum group elements (PGEs) in plant material suffer from sample digestion which results in sample dilution and therefore requires high sample intakes to maintain the sensitivity. The presented solid-sampling method avoids sample digestion while improving sensitivity when compared to digestion-based inductively coupled plasma optical emission spectrometry (ICP-OES) methods and allows the analysis of sample masses of 5 mg or less. Detection limits of 0.38 μg g{sup −1}, 0.14 μg g{sup −1} and 0.13 μg g{sup −1} were obtained for Pt, Pd and Rh, respectively using a sample intake of 5 mg. The reproducibility of the procedure ranged between 4.7% (Pd) relative standard deviation (RSD, n = 7) and 7.1% (Rh) RSD for 25 ng analytes. For quantification, aqueous standards were applied on paper filter strips and dried. Only the dried filters were introduced into the electrothermal vaporization unit. This approach successfully removed memory-effects observed during analysis of platinum which occurred only if liquid standards came into contact with the graphite material of the furnace. The presented method for overcoming the Pt-memory-effects may be of further interest for the analysis of other carbide-forming analytes as it does not require any technical modification of the graphite furnace (e.g., metal inlays, pyrolytic coating). Owing to lack of suitable certified reference materials, the proposed method was compared with conventional ICP-OES analysis of digested samples and a good agreement was obtained. As a result of the low sample consumption, it was possible to determine the spatial distribution of PGEs within a single plant. Significant differences in PGE concentrations were observed between the shoots (stem, leaves) and the roots. Pd was mainly found in the roots, whereas Pt and Rh were also found in higher concentrations in the shoots. - Highlights: • The uptake of Pt, Pd and Rh by hydroponically grown plants was

  10. Determination of Pt, Pd and Rh in Brassica Napus using solid sampling electrothermal vaporization inductively coupled plasma optical emission spectrometry

    International Nuclear Information System (INIS)

    Nischkauer, Winfried; Herincs, Esther; Puschenreiter, Markus; Wenzel, Walter; Limbeck, Andreas

    2013-01-01

    Conventional approaches for the analysis of platinum group elements (PGEs) in plant material suffer from sample digestion which results in sample dilution and therefore requires high sample intakes to maintain the sensitivity. The presented solid-sampling method avoids sample digestion while improving sensitivity when compared to digestion-based inductively coupled plasma optical emission spectrometry (ICP-OES) methods and allows the analysis of sample masses of 5 mg or less. Detection limits of 0.38 μg g −1 , 0.14 μg g −1 and 0.13 μg g −1 were obtained for Pt, Pd and Rh, respectively using a sample intake of 5 mg. The reproducibility of the procedure ranged between 4.7% (Pd) relative standard deviation (RSD, n = 7) and 7.1% (Rh) RSD for 25 ng analytes. For quantification, aqueous standards were applied on paper filter strips and dried. Only the dried filters were introduced into the electrothermal vaporization unit. This approach successfully removed memory-effects observed during analysis of platinum which occurred only if liquid standards came into contact with the graphite material of the furnace. The presented method for overcoming the Pt-memory-effects may be of further interest for the analysis of other carbide-forming analytes as it does not require any technical modification of the graphite furnace (e.g., metal inlays, pyrolytic coating). Owing to lack of suitable certified reference materials, the proposed method was compared with conventional ICP-OES analysis of digested samples and a good agreement was obtained. As a result of the low sample consumption, it was possible to determine the spatial distribution of PGEs within a single plant. Significant differences in PGE concentrations were observed between the shoots (stem, leaves) and the roots. Pd was mainly found in the roots, whereas Pt and Rh were also found in higher concentrations in the shoots. - Highlights: • The uptake of Pt, Pd and Rh by hydroponically grown plants was investigated

  11. Rapid, general synthesis of PdPt bimetallic alloy nanosponges and their enhanced catalytic performance for ethanol/methanol electrooxidation in an alkaline medium.

    Science.gov (United States)

    Zhu, Chengzhou; Guo, Shaojun; Dong, Shaojun

    2013-01-14

    We have demonstrated a rapid and general strategy to synthesize novel three-dimensional PdPt bimetallic alloy nanosponges in the absence of a capping agent. Significantly, the as-prepared PdPt bimetallic alloy nanosponges exhibited greatly enhanced activity and stability towards ethanol/methanol electrooxidation in an alkaline medium, which demonstrates the potential of applying these PdPt bimetallic alloy nanosponges as effective electrocatalysts for direct alcohol fuel cells. In addition, this simple method has also been applied for the synthesis of AuPt, AuPd bimetallic, and AuPtPd trimetallic alloy nanosponges. The as-synthesized three-dimensional bimetallic/trimetallic alloy nanosponges, because of their convenient preparation, well-defined sponge-like network, large-scale production, and high electrocatalytic performance for ethanol/methanol electrooxidation, may find promising potential applications in various fields, such as formic acid oxidation or oxygen reduction reactions, electrochemical sensors, and hydrogen-gas sensors. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Electrochemical immunosensor for detecting typical bladder cancer biomarker based on reduced graphene oxide-tetraethylene pentamine and trimetallic AuPdPt nanoparticles.

    Science.gov (United States)

    Ma, Hongmin; Zhang, Xiaoyue; Li, Xiaojian; Li, Rongxia; Du, Bin; Wei, Qin

    2015-10-01

    A highly sensitive electrochemical immunosensor for detection of typical bladder cancer biomarker-nuclear matrix protein 22 (NMP22) was developed by using reduced graphene oxide-tetraethylene pentamine (rGO-TEPA) and trimetallic AuPdPt nanoparticles (NPs). rGO-TEPA was used as the ideal material for signal amplification and AuPdPt NPs immobilization due to its excellent conductivity and large surface area. An effective platform was constructed for antibodies anchoring by using AuPdPt NPs, which kept the antibodies' high stability and bioactivity. Moreover, AuPdPt NPs could accelerate the electron transfer and enhance the signal response, which assisted by the synergistic effect of the three different metals (Au, Pd and Pt). The proposed immunosensor showed satisfied performance such as simple fabrication, low detection limits (0.01 U/mL), wide linear range (from 0.040 to 20 U/mL), short analysis time (2 min), high stability and selectivity in the detection of NMP22. Furthermore, the proposed immunosensor was employed to test real urine samples with satisfactory results. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Pd-Pt loaded graphene aerogel on nickel foam composite as binder-free anode for a direct glucose fuel cell unit

    Science.gov (United States)

    Tsang, Chi Him A.; Leung, D. Y. C.

    2017-09-01

    Fabrication of electrocatalyst for direct glucose fuel cell (DGFC) operation involves destructive preparation methods with the use of stabilizer like binder, which may cause activity depreciation. Binder-free electrocatalytic electrode becomes a possible solution to the above problem. Binder-free bimetallic Pd-Pt loaded graphene aerogel on nickel foam plates with different Pd/Pt ratios (1:2.32, 1:1.62, and 1:0.98) are successfully fabricated through a green one-step mild reduction process producing a Pd-Pt/GO/nickel form plate (NFP) composite. Anode with the binder-free electrocatalysts exhibit a strong activity in a batch type DGFC unit under room temperature. The effects of glucose and KOH concentrations, and the Pd/Pt ratios of the electrocatalyst on the DGFC performance are also studied. Maximum power density output of 1.25 mW cm-2 is recorded with 0.5 M glucose/3 M KOH as the anodic fuel, and Pd1Pt0.98/GA/NFP as catalyst, which is the highest obtained so far among other types of electrocatalyst.

  14. Facile and rapid one-pot microwave-assisted synthesis of Pd-Ni magnetic nanoalloys confined in mesoporous carbons

    Energy Technology Data Exchange (ETDEWEB)

    Martínez de Yuso, Alicia; Le Meins, Jean-Marc [Université de Strasbourg, Université de Haute-Alsace, Institut de Science des Matériaux de Mulhouse, CNRS UMR (France); Oumellal, Yassine; Paul-Boncour, Valérie; Zlotea, Claudia [Institut de Chimie et des Matériaux Paris Est, UMR 7182, CNRS-UPEC (France); Matei Ghimbeu, Camelia, E-mail: camelia.ghimbeu@uha.fr [Université de Strasbourg, Université de Haute-Alsace, Institut de Science des Matériaux de Mulhouse, CNRS UMR (France)

    2016-12-15

    An easy and rapid one-pot microwave-assisted soft-template synthesis method for the preparation of Pd-Ni nanoalloys confined in mesoporous carbon is reported. This approach allows the formation of mesoporous carbon and the growth of the particles at the same time, under short microwave irradiation (4 h) compared to the several days spent for the classical approach. In addition, the synthesis steps are diminished and no thermopolymerization step or reduction treatment being required. The influence of the Pd-Ni composition on the particle size and on the carbon characteristics was investigated. Pd-Ni solid solutions in the whole composition range could be obtained, and the metallic composition proved to have an important effect on the nanoparticle size but low influence on carbon textural properties. Small and uniformly distributed nanoparticles were confined in mesoporous carbon with uniform pore size distribution, and dependence between the nanoparticle size and the nanoalloy composition was observed, i.e., increase of the particle size with increasing the Ni content (from 5 to 14 nm). The magnetic properties of the materials showed a strong nanoparticle size and/or composition effect. The blocking temperature of Pd-Ni nanoalloys increases with the increase of Ni amount and therefore of particle size. The magnetization values are smaller than the bulk counterpart particularly for the Ni-rich compositions due to the formed graphitic shells surrounding the particles inducing a dead magnetic layer.

  15. Effect of water vapor on evolution of a thick Pt-layer modified oxide on the NiCoCrAl alloy at high temperature

    Science.gov (United States)

    Song, Peng; He, Xuan; Xiong, Xiping; Ma, Hongqing; Song, Qunling; Lü, Jianguo; Lu, Jiansheng

    2018-03-01

    To investigate the effect of water vapor on the novel Pt-containing oxide growth behavior, Pt-addition within the oxide layer on the surface of NiCoCrAl coating and furnace cycle tests were carried out at 1050 °C in air and air plus water vapor. The thick Pt-containing oxide layer on NiCoCrAl exhibits a different oxidation growth behavior compared to the conventional Pt-diffusion metallic coatings. The Pt-containing oxide after oxidation in air plus water vapor showed a much thicker oxide layer compare to the ones without Pt addition, and also presented a much better coating adhesion. During the oxidation process in air, Pt promotes the spinel (NiCr2O4) formation. However, the Cr2O3 formed in air with water vapor and fixed Pt within the complex oxide layer. The water vapor promoted the Ni and Co outer-diffusion, and combined with Pt to form CoPt compounds on the surface of the NiCoCrAl coating system.

  16. Phase Transformation and Shape Memory Effect of Ti-Pd-Pt-Zr High-Temperature Shape Memory Alloys

    Science.gov (United States)

    Yamabe-Mitarai, Yoko; Takebe, Wataru; Shimojo, Masayuki

    2017-12-01

    To understand the potential of high-temperature shape memory alloys, we have investigated the phase transformation and shape memory effect of Ti-(50 - x)Pt- xPd-5Zr alloys ( x = 0, 5, and 15 at.%), which present the B2 structure in the austenite phase and B19 structure in the martensite phase. Their phase transformation temperatures are very high; A f and M f of Ti-50Pt are 1066 and 1012 °C, respectively. By adding Zr and Pd, the phase transition temperatures decrease, ranging between 804 and 994 °C for A f and 590 and 865 °C for M f. Even at the high phase transformation temperature, a maximum recovery ratio of 70% was obtained for one cycle in a thermal cyclic test. A work output of 1.2 J/cm3 was also obtained. The recovery ratio obtained by the thermal cyclic test was less than 70% because the recovery strain was < 1% and a large irrecoverable strain was obtained. The shape recovery was explained by the austenite strength. The training effect was also investigated.

  17. Final Technical Report: First Principles Investigations for the Ensemble Effects of PdAu and PtAu Bimetallic Nanocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Ruqian Wu

    2012-05-18

    Bimetallic surfaces with tunable chemical properties have attracted broad attention in recent years due to their ample potential for heterogeneous catalysis applications. The local chemical properties of constituents are strongly altered from their parent metals by 'ligand effect', a term encompassing the influences of charge transfer, orbital rehybridization and lattice strain. In comparison to the aforementioned, the 'ensemble effect' associated with particular arrangements of the active constituents have received much less attention, despite their notable importance towards the determination of reactivity and selectivity of bimetallic catalysts. We performed theoretical studies for understanding the ensemble effects on bimetallic catalysis: (i) simulations for the formation of different ensembles on PdAu and PtAu nanoclusters; (ii) studies of the size, shape, and substrate dependence of their electronic properties; and (iii) simulations for model reactions such as CO oxidation, methanol, ethylene and water dehydrogenation on PdAu and PtAu nanoclusters. In close collaboration with leading experimental groups, our theoretical research elucidated the fundamentals of Au based bimetallic nanocatalysts.

  18. X-ray fluorescence determination of Au, Pd and Pt from chloride solutions after preconcentration on cellulose filters

    International Nuclear Information System (INIS)

    Gordeeva, V.P.; Glazkova, S.V.; Tsysin, G.I.; Ivanov, V.M.; Zolotov, Yu. A.

    2003-01-01

    The aim of this work was synthesis of new sorption cellulose filters for dynamic preconcentration of Au, Pd and Pt from chloride solutions and subsequent XRF determination of these elements on the filters. New filters were prepared by impregnation of a filter paper with solution of tri-n-octylamine and paraffin in hexane (TOA-filters). The effect of paraffin and TOA concentration in hexane on a content of nitrogen in a filter was studied. It was found that Au(III), Pd(II) and Pt(IV) were quantitatively recovered on the TOA-filters (filtering surface diameter of 23 mm, thickness of 0.15 mm) from 0.5 - 1 M HCl at a flow rates of 2-5 ml min-1 from 10-100 ml of solution. The mathematical model of sorption dynamics was offered for the estimation of potential possibilities of new impregnated sorbents and for the evaluation of optimum dynamic conditions allowing to achieve of maximum concentration efficiency (CE max ). The elements were determined directly on the filters by XRF spectrometer. Palladium was also determined on the TOA-filters after formation of coloured compounds of metal with 4-(2-pyridylazo)resorcinol (PAR) by diffuse reflectance spectroscopy with the calculation of calorimetric characteristics and using test-scale. (authors)

  19. Modeling the effects of temperature and time of homogenization annealing on the hardness of PdNi5 alloy

    Directory of Open Access Journals (Sweden)

    Ivanović Aleksandra T.

    2014-01-01

    Full Text Available Experimental design methodology represents a powerful tool for the analysis and optimization of various processes. PdNi5 alloy is used in the in the production process of nitric acid, as Pd-catalyst-trap. The role of Pd-catalyst-trap consists in reduction of volatile platinum oxide from gas flow to the metal form and retention of platinum metal on the surface of Pd catalyst-trap. Fundamental knowledge about this alloy and its practical use in reduction of volatile platinum oxide, can be improved by experimental planning and statistical analysis. In this study, the effects of annealed temperature and annealed time on the hardness of PdNi5 alloy were evaluated and compared. Full factorial experimental design at three levels was applied. Statistically significant factors were determined considering of hardness of PdNi5 alloy as a system response. By regression analysis, the mathematical model for process description was derived. The correlation between predicted and experimental values was high (R2=0,976 . In the investigated ranges of parameters, the obtained empirical equation can be applied for the prediction of system response. [Projekat Ministarstva nauke Republike Srbije, br TR 34029: Razvoj tehnologije proizvodnje Pd katalizatora-hvatača za smanjenje gubitaka platine u visokotemperaturnim procesima katalize

  20. Electrocatalytic oxidation of ethylene glycol at palladium-bimetallic nanocatalysts (PdSn and PdNi) supported on sulfonate-functionalised multi-walled carbon nanotubes

    CSIR Research Space (South Africa)

    Ramulifho, T

    2013-04-01

    Full Text Available Electrocatalytic oxidation of ethylene glycol (EG) in alkaline medium using nano-scaled palladium-based bimetallic catalysts (PdM, where M = Ni and Sn) supported on sulfonated multi-walled carbon nanotubes (SF-MWCNTs) is compared. The bimetallic...

  1. Ni/Pd-Decorated Carbon NFs as an Efficient Electrocatalyst for Methanol Oxidation in Alkaline Medium

    Science.gov (United States)

    Mohamed, Ibrahim M. A.; Khalil, Khalil Abdelrazek; Mousa, Hamouda M.; Barakat, Nasser A. M.

    2017-01-01

    In this study, Ni/Pd-decorated carbon nanofibers (NFs) were fabricated as an electrocatalyst for methanol oxidation. These NFs were synthesized based on carbonization of poly(vinyl alcohol), which has high carbon content compared to many polymers used to prepare carbon NFs. Typically, calcination of an electrospun mat composed of nickel acetate, palladium acetate, and poly(vinyl alcohol) can produce Ni/Pd-doped carbon NFs. The introduced NFs were characterized by scanning electron microscopy, transmission electron microscopy (TEM), high-resolution transmission electron microscopy, line TEM energy dispersive x-ray spectrometry, field emission scanning electron microscopy, and x-ray powder diffraction. These physicochemical characterizations are acceptable tools to investigate the crystallinity and chemistry of the fabricated Ni/Pd-carbon NFs. Accordingly, the prepared NFs were tested to enhance the economic and catalytic behavior of methanol electrooxidation. Experimentally, the obtained onset potential was small compared to many reported materials; 0.32 V (versus Ag/AgCl as a reference electrode). At the same time, the current density changed from 5.08 mA/cm2 in free methanol at 0.6 V to 12.68 mA/cm2 in 0.1 mol/L methanol, which can be attributed to the MeOH oxidation. Compared to nanoparticles, the NFs have a distinct effect on the electrocatalytic performance of material due to the effect of the one-dimensional structure, which facilitates the electron transfer. Overall, the presented work opens a new way for non-precious one-dimensional nanostructured catalysts for direct methanol fuel cell technology.

  2. Metal nanostructures with complex surface morphology: The case of supported lumpy Pd and Pt nanoparticles produced by laser processing of metal films

    Science.gov (United States)

    Ruffino, F.; Maugeri, P.; Cacciato, G.; Zimbone, M.; Grimaldi, M. G.

    2016-09-01

    In this work we report on the formation of lumpy Pd and Pt nanoparticles on fluorine-doped tin oxide/glass (FTO/glass) substrate by a laser-based approach. In general, complex-surface morphology metal nanoparticles can be used in several technological applications exploiting the peculiarities of their physical properties as modulated by nanoscale morphology. For example plasmonic metal nanoparticles presenting a lumpy morphology (i.e. larger particles coated on the surface by smaller particles) can be used in plasmonic solar cell devices providing broadband scattering enhancement over the smooth nanoparticles leading, so, to the increase of the device efficiency. However, the use of plasmonic lumpy nanoparticles remains largely unexplored due to the lack of simply, versatile, low-cost and high-throughput methods for the controllable production of such nanostructures. Starting from these considerations, we report on the observation that nanoscale-thick Pd and Pt films (17.6 and 27.9 nm, 12.1 and 19.5 nm, respectively) deposited on FTO/glass surface irradiated by nanosecond pulsed laser at fluences E in the 0.5-1.5 J/cm2 range, produce Pd and Pt lumpy nanoparticles on the FTO surface. In addition, using scanning electron microscopy analyses, we report on the observation that starting from each metal film of fixed thickness h, the fraction F of lumpy nanoparticles increases with the laser fluence E and saturates at the higher fluences. For each fixed fluence, F was found higher starting from the Pt films (at each starting film thickness h) with respect to the Pd films. For each fixed metal and fluence, F was found to be higher decreasing the starting thickness of the deposited film. To explain the formation of the lumpy Pd and Pt nanoparticles and the behavior of F as a function of E and h both for Pd and Pt, the thermodynamic behavior of the Pd and Pt films and nanoparticles due to the interaction with the nanosecond laser is discussed. In particular, the

  3. An anodic alumina supported Ni-Pt bimetallic plate-type catalysts for multi-reforming of methane, kerosene and ethanol

    KAUST Repository

    Zhou, Lu

    2014-05-01

    An anodic alumina supported Ni-Pt bimetallic plate-type catalyst was prepared by a two-step impregnation method. The trace amount 0.08 wt% of Pt doping efficiently suppressed the nickel particle sintering and improved the nickel oxides reducibility. The prepared Ni-Pt catalyst showed excellent performance during steam reforming of methane, kerosene and ethanol under both 3000 h stationary and 500-time daily start-up and shut-down operation modes. Self-activation ability of this catalyst was evidenced, which was considered to be resulted from the hydrogen spillover effect over Ni-Pt alloy. In addition, an integrated combustion-reforming reactor was proposed in this study. However, the sintering of the alumina support is still a critical issue for the industrialization of Ni-Pt catalyst. Copyright © 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

  4. Electric field poling induced self-biased converse magnetoelectric response in PMN-PT/NiFe2O4 nanocomposites

    Science.gov (United States)

    Ahlawat, Anju; Satapathy, S.; Deshmukh, Pratik; Shirolkar, M. M.; Sinha, A. K.; Karnal, A. K.

    2017-12-01

    In this letter, studies on structural transitions and the effect of electric field poling on magnetoelectric (ME) properties in 0.65Pb (Mg1/3Nb2/3)O3-0.35PbTiO3 (PMN-PT)/NiFe2O4 (NFO) nanocomposites are reported. The composite illustrates dramatic changes in the NFO crystal structure across ferroelectric transition temperature [Curie temperature (Tc) ˜ 450 K] of PMN-PT, while pure NFO does not exhibit any structural change in the temperature range (300 K-650 K). Synchrotron based X-ray diffraction analysis revealed the splitting of NFO peaks across the Tc of PMN-PT in the PMN-PT/NFO composite. Consequently, the anomalies are observed in temperature dependent magnetization of the NFO phase at the Tc of PMN-PT, establishing ME coupling in the PMN-PT/NFO composite. Furthermore, the composite exhibits drastic modification in ME coupling under electrically poled and unpoled conditions. A large self-biased ME effect characterized by non-zero ME response at zero Hbias was observed in electrically poled composites, which was not observed in unpoled PMN-PT/NFO. These results propose an alternative mechanism for intrinsic converse ME effects. The maximum magnetoelectric output was doubled after electrical poling. The observed self-biased converse magnetoelectric effect at room temperature provides potential applications in electrically controlled memory devices and magnetic flux control devices.

  5. Phonon dispersions and elastic constants of disordered Pd-Ni alloys

    Energy Technology Data Exchange (ETDEWEB)

    Kart, S. Oezdemir [Department of Physics, Middle East Technical University, 06531 Ankara (Turkey)]. E-mail: ozsev@newton.physics.metu.edu.tr; Tomak, M. [Department of Physics, Middle East Technical University, 06531 Ankara (Turkey); Cagin, T. [Department of Chemical Engineering, Texas A and M University, College Station, TX 77845-3122 (United States)

    2005-01-31

    Phonon frequencies of Pd-Ni alloys are calculated by molecular dynamics (MD) simulation. Lattice dynamical properties computed from Sutton-Chen (SC) and quantum Sutton-Chen (Q-SC) potentials as a function of temperature are compared with each other. We present all interatomic force constants up to the 8th nearest-neighbor shell obtained by using the calculated potential. Elastic constants evaluated by two methods are consistent with each other. The transferability of the potential is also tested. The results are in good agreement with experimental data and other calculations.

  6. Phonon dispersions and elastic constants of disordered Pd-Ni alloys

    International Nuclear Information System (INIS)

    Kart, S. Oezdemir; Tomak, M.; Cagin, T.

    2005-01-01

    Phonon frequencies of Pd-Ni alloys are calculated by molecular dynamics (MD) simulation. Lattice dynamical properties computed from Sutton-Chen (SC) and quantum Sutton-Chen (Q-SC) potentials as a function of temperature are compared with each other. We present all interatomic force constants up to the 8th nearest-neighbor shell obtained by using the calculated potential. Elastic constants evaluated by two methods are consistent with each other. The transferability of the potential is also tested. The results are in good agreement with experimental data and other calculations

  7. Microfiber Bragg grating hydrogen sensor base on co-sputtered Pd/Ni composite film

    Science.gov (United States)

    Wang, Gaopeng; Yang, Minghong; Dai, Jixiang; Cheng, Cheng; Yuan, Yinqian

    2015-07-01

    A novel hydrogen sensor based on Pd/Ni co-sputtered coating on micro fiber Bragg grating (MFBG) is proposed and experimentally demonstrated. The microfiber is stretched uniformly and the Bragg grating is directly inscribed on the microfiber without hydrogen loading using 193 nm ArF excimer laser and a phase mask. Palladium and nickel coatings are co-sputtered on the micro fiber Bragg grating for hydrogen sensing. The MFBG hydrogen sensors are characterized concerning their response to the hydrogen, ambient temperature and ambient refractive index, respectively. The performance of the proposed MFBG hydrogen sensor is obviously enhanced, especially when compared to standard FBG hydrogen sensors.

  8. PtNi Alloy Cocatalyst Modification of Eosin Y-Sensitized g-C3N4/GO Hybrid for Efficient Visible-Light Photocatalytic Hydrogen Evolution

    Science.gov (United States)

    Wang, Peng; Zong, Lanlan; Guan, Zhongjie; Li, Qiuye; Yang, Jianjun

    2018-02-01

    An economic and effective Pt-based alloy cocatalyst has attracted considerable attention due to their excellent catalytic activity and reducing Pt usage. In this study, PtNi alloy cocatalyst was successfully decorated on the g-C3N4/GO hybrid photocatalyst via a facile chemical reduction method. The Eosin Y-sensitized g-C3N4/PtNi/GO-0.5% composite photocatalyst yields about 1.54 and 1178 times higher hydrogen evolution rate than the Eosin Y-sensitized g-C3N4/Pt/GO-0.5% and g-C3N4/Ni/GO-0.5% samples, respectively. Mechanism of enhanced performance for the g-C3N4/PtNi/GO composite was also investigated by different characterization, such as photoluminescence, transient photocurrent response, and TEM. These results indicated that enhanced charge separation efficiency and more reactive sites are responsible for the improved hydrogen evolution performance due to the positive synergetic effect between Pt and Ni. This study suggests that PtNi alloy can be used as an economic and effective cocatalyst for hydrogen evolution reaction. [Figure not available: see fulltext.

  9. Study of the hydrogenation properties of the system LaNi{sub (5-x)}Pd{sub x}; Etude des proprietes d'hydrogenation du systeme LaNi{sub (5-x)}Pd{sub x}

    Energy Technology Data Exchange (ETDEWEB)

    Prigent, J.; Joubert, J.M. [Institut de Chimie et des Materiaux Paris-Est, Chimie Metallurgiques des Terres Rares, 94 - Thiais (France); Prigent, J.; Gupta, M. [Paris-11 Univ., Lab. de Thermodynamique et Physica-Chimie des Hydrures et Oxydes, EA 3547, 91 - Orsay (France)

    2007-07-01

    In this work, the pseudobinary diagram LaNi{sub 5}-LaPd{sub 5} has been established and the structural properties of the compounds LaNi{sub 5-x}Pd{sub x} studied. When the alloys was mono-phased with a CaCu{sub 5} type structure, a study of the hydrogen absorption properties has been carried out. The hydrogen solubilities limits and the hydrides structures have been determined by in situ neutrons diffraction. The electronic structure of the intermetallic compounds and of their hydrides is studied by ab initio calculations. (O.M.)

  10. Studies of the development and characterization of the Cu-Ni-Pt and Cu-Ni-Sn alloys for electro-electronic uses; Estudos do desenvolvimento e caracterizacao das ligas Cu-Ni-Pt e Cu-Ni-Sn para fins eletro-eletronicos

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Luis Carlos Elias da

    2006-07-01

    The Cu and its alloys have different applications in the owed modern society the excellent electric properties, thermal conductivity, resistance to the corrosion and other properties. These applications can be in valves, pipes, pots for absorption of solar energy, radiators for automobiles, current driver, electronic driver, thermostats elements and structural parts of nuclear reactors, as, for example, reels for field toroidal for a reactor of nuclear coalition. The alloys used in nuclear reactors, we can highlight Cu-Be, Cu-Sn and Cu-Pt. Ni and Co frequently are added to the Cu alloys so that the solubility is moved for temperatures more elevated with relationship to the binary systems of Cu-Sn and Cu-Pt. The addition of Ni-Pt or Ni-Sn to the Cu in the same or inferior percentages to 1,5% plus thermomechanical treatments changes the properties of the copper. We studied the electric conductivity and hardness Vickers of the Cu-Ni-Pt and Cu-Ni-Sn and compared with the electrolytic Cu. In the proposed flowcharts, breaking of the obtaining of the ingot, we proceeded with thermo mechanical treatments. (author)

  11. PtNi supported on binary metal oxides: Potential bifunctional electrocatalysts for low-temperature fuel cells?

    Science.gov (United States)

    Martins, M.; Šljukić, B.; Sequeira, C. A. C.; Soylu, G. S. P.; Yurtcan, A. B.; Bozkurt, G.; Sener, T.; Santos, D. M. F.

    2018-01-01

    PtNi nanoparticles (NPs) were synthesised by microwave irradiation technique and supported onto Mn2O3 and two binary metal oxides, Mn2O3-TiO2 and Mn2O3-NiO, prepared by solid-state dispersion method. TEM analysis revealed formation of PtNi NPs of 2-3 nm diameter on the metal oxides. Their activity for oxygen reduction reaction (ORR) and borohydride oxidation reaction (BOR) in alkaline media was studied using voltammetric, amperometric and electrochemical impedance spectroscopy techniques. The effect of electrolyte composition and operation temperature on the catalysts performance was also examined. ORR and BOR kinetic parameters, namely Tafel slope, kinetic current density, order of reaction and activation energy were evaluated, enabling direct comparison of the three electrocatalysts performance. The results show that PtNi NPs anchored on binary metal oxide supports possess superior activity for BOR in alkaline media, suggesting their potential application as anodes in low-temperature fuel cells.

  12. UV Light-Assisted Synthesis of Highly Efficient Pd-Based Catalyst over NiO for Hydrogenation of o-Chloronitrobenzene.

    Science.gov (United States)

    Jiang, Weidong; Xu, Bin; Fan, Guangyin; Zhang, Kaiming; Xiang, Zhen; Liu, Xiaoqiang

    2018-04-14

    Supported Pd-based catalyst over active nickel oxide (NiO) was repared using the impregnation method companying with UV-light irradiation. Moreover, the catalytic performance of the obtained Pd-based catalysts was evaluated towards the hydrogenation of o -chloronitrobenzene ( o -CNB). Observations indicate that the as-prepared UV-irradiated Pd/NiO catalyst with a mole fraction 0.2% (0.2%Pd/NiO) has higher activity and selectivity in the o -CNB hydrogenation. Especially, UV-light irradiation played a positive role in the improvement of catalytic activity of 0.2%Pd/NiO catalyst, exhibiting an excess 11-fold activity superiority in contrast with non-UV-irradiated 0.2%Pd/NiO catalyst. In addition, it was investigated that effects of varied factors (i.e., reaction time, temperature, o -CNB/Pd ratio, Pd loading, hydrogen pressure) on the selective hydrogenation of ο -CNB catalyzed by UV-irradiated 0.2%Pd/NiO catalyst. Under the reaction conditions of 60 °C, 0.5 h, 1 MPa H₂ pressure, 100% conversion of o -CNB, and 81.1% o -CAN selectivity were obtained, even at high molar ratio (8000:1) of o -CNB to Pd.

  13. Synthesis and characterization of Pt-Sn-Ni alloys to application as catalysts for direct ethanol fuel cells; Sintese e caracterizacao de ligas de Pt-Sn-Ni para aplicacao como caztalisadores em celulas a combustivel do tipo DEFC

    Energy Technology Data Exchange (ETDEWEB)

    Silva, E.L. da; Correa, P.S.; Oliveira, E.L. de; Takimi, A.S.; Malfatti, C.F., E-mail: celia.malfatti@ufrgs.b [Universidade Federal do Rio Grande do Sul (LAPEC/UFRGS), Porto Alegre, RS (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica. Lab. de Pesquisa em Corrosao; Radtke, C. [Universidade Federal do Rio Grande do Sul (IQ/UFRGS), Porto Alegre, RS (Brazil). Inst. de Quimica

    2010-07-01

    Direct ethanol fuel cells (DEFCs) have been the focus of recent research due its application in mobile energy sources. In order to obtain the maximum efficiency from these systems, it is necessary the total ethanol oxidation, which implies in C-C bond break. Different catalysts described in literature are employed with this intent. This work consists in studying PtSnNi catalysts supported on carbon Vulcan XC72R, to application in DEFCs. Thus, it was used the impregnation/reduction method, varying the atomic proportion among Pt, Sn and Ni. The alloys were characterized by X-Ray Diffraction, Cyclic Voltammetry and Transmission Microscopy. Preliminary results show that predominant structure on the catalysts is the face centered cubic platinum and the densities currents are dependent on the platinum amount. (author)

  14. PREPARATION, CHARACTERIZATIONS AND MODIFICATION OF Ni-Pd/NATURAL ZEOLITE CATALYSTS

    Directory of Open Access Journals (Sweden)

    Wega Trisunaryanti

    2010-06-01

    Full Text Available Preparation, and modification of Ni-Pd/natural zeolite as well as their characterizations had been carried out. The aim of this research for the fututure is to prepare the best characters catalyst for the conversion of waste plastics fraction to gasoline fraction (C5-C12 hydrocarbons. The preparation of catalysts was performed by reacting a natural zeolite with the precursor of Ni(NO32. 9H2O and PdCl2 in an ammonia solution (25%. The modifications were performed by varying the rasio of Ni/Pd loaded to the zeolite, whereas the Pd was previously loaded and total metal content was 1 wt.% based on the zeolite. The characterization of catalysts included determination of acidity gravimetrically by adsorption of ammonia or pyridine vapour  base method, metal content by Atomic Adsorption Spectrophotometer (AAS and X-ray Fluoresence (XRF and crystallinity by X-ray Diffraction (XRD. The treatment of catalysts using Etilene Diamine Tetra Acetic acid  (EDTA was performed to study the metal distribution on the outer or inner surface of the zeolite. The characterization results showed that the loading of metals to the zeolite increased its acidity and decreased its spesific surface area, however, did not defect its crystallnity.  The metals loaded on the zeolite were distributed inside the pore and at outer surface of the zeolite. For all catalyst samples, the acidities determined using ammonia were higher than those of pyridine, and the acidities determined before the EDTA treatment was lower than those after the treatment.  Metal contents of the zeolite before the EDTA treatment were higher than those after the treatment. The EDTA treatment enhanced the crystallinity of the sampel. The relationship between the metal rasio towards the acidity of the catalyst samples were in variation. Catalyst samples produced in this research have good characters, thus promisingly can be used for conversion process of waste plastics to gasoline fraction.    Keywords

  15. Reactivity of ammonia ligands of the antitumor agent cisplatin: a unique dodecanuclear Pt4,Pd4,Ag4 platform for four cytosine model nucleobases.

    Science.gov (United States)

    Kampf, Gunnar; Sanz Miguel, Pablo J; Morell Cerdà, Marta; Willermann, Michael; Schneider, Alexandra; Lippert, Bernhard

    2008-01-01

    The reaction of a potential mono(nucleobase) model adduct of cisplatin, cis-[Pt(NH(3))(2)(1-MeC-N3)(H(2)O)](2+) (6; 1-MeC: 1-methylcytosine), with the electrophile [Pd(en)(H(2)O)(2)](2+) (en: ethylenediamine) at pH approximately 6 yields a kinetic product X which is likely to be a dinuclear Pt,Pd complex containing 1-MeC(-)-N3,N4 and OH bridges, namely cis-[Pt(NH(3))(2)(1-MeC(-)-N3,N4)(OH)Pd(en)](2+). Upon addition of excess Ag(+) ions, conversion takes place to form a thermodynamic product, which, according to (1)H NMR spectroscopy and X-ray crystallography, is dominated by a mu-NH(2) bridge between the Pt(II) and Pd(II) centers. X-ray crystallography reveals that the compound crystallizes out of solution as a dodecanuclear complex containing four Pt(II), four Pd(II), and four Ag(+) entities: [{Pt(2)(1-MeC(-)-N3,N4)(2)(NH(3))(2)(NH(2))(2)(OH)Pd(2)(en)(2)Ag}(2){Ag(H(2)O)}(2)](NO(3))(10) 6 H(2)O (10) is composed of a roughly planar array of the 12 metal ions, in which the metal ions are interconnected by mu-NH(2) groups (between Pt and Pd centers), mu-OH groups (between pairs of Pt atoms), and metal-metal donor bonds (Pt-->Ag, Pd-->Ag). The four 1-methylcytosinato ligands, which are stacked pairwise, as well as the four NH(3) ligands and parts of the en rings, are approximately perpendicular to the metal plane. Two of the four Ag ions (Ag2, Ag2') of 10 are labile in solution and show the expected behavior of Ag(+) ions in water, that is, they are readily precipitated as AgCl by Cl(-) ions. The resulting pentanuclear complex [Pt(2)Pd(2)Ag(1-MeC(-))(2)(NH(2))(2)(OH)(NH(3))(2)(en)(2)](NO(3))(4)7 H(2)O (11) largely maintains the structural features of one half of 10. The other two Ag(+) ions (Ag1, Ag1') of 10 are remarkably unreactive toward excess NaCl. In fact, the pentanuclear complex [Pt(2)Pd(2)AgCl(1-MeC(-))(2)(NH(2))(2)(OH)(NH(3))(2)(en)(2)](NO(3))(3)4.5 H(2)O (12), obtained from 10 with excess NaCl, displays a Cl(-) anion bound to the Ag center (2.459(3) A) and

  16. Electric-field tunable spin waves in PMN-PT/NiFe heterostructure: Experiment and micromagnetic simulations

    Energy Technology Data Exchange (ETDEWEB)

    Ziȩtek, Slawomir, E-mail: zietek@agh.edu.pl [AGH University of Science and Technology, Department of Electronics, Al. Mickiewicza 30, 30-059 Kraków (Poland); Chȩciński, Jakub [AGH University of Science and Technology, Department of Electronics, Al. Mickiewicza 30, 30-059 Kraków (Poland); AGH University of Science and Technology, Faculty of Physics and Applied Computer Science, Al. Mickiewicza 30, 30-059 Kraków (Poland); Frankowski, Marek; Skowroński, Witold; Stobiecki, Tomasz [AGH University of Science and Technology, Department of Electronics, Al. Mickiewicza 30, 30-059 Kraków (Poland)

    2017-04-15

    We present a comprehensive theoretical and experimental study of voltage-controlled standing spin waves resonance (SSWR) in PMN-PT/NiFe multiferroic heterostructures patterned into microstrips. A spin-diode technique was used to observe ferromagnetic resonance (FMR) mode and SSWR in NiFe strip mechanically coupled with a piezoelectric substrate. Application of an electric field to a PMN-PT creates a strain in permalloy and thus shifts the FMR and SSWR fields due to the magnetostriction effect. The experimental results are compared with micromagnetic simulations and a good agreement between them is found for dynamics of FMR and SSWR with and without electric field. Moreover, micromagnetic simulations enable us to discuss the amplitude and phase spatial distributions of FMR and SSWR modes, which are not directly observable by means of spin diode detection technique.

  17. DNA-Binding Studies of Some Potential Antitumor 2,2'-bipyridine Pt(II)/Pd(II) Complexes of piperidinedithiocarbamate. Their Synthesis, Spectroscopy and Cytotoxicity.

    Science.gov (United States)

    Mansouri-Torshizi, Hassan; Eslami-Moghadam, Mahboube; Divsalar, Adeleh; Saboury, Ali-Akbar

    2011-12-01

    In this study two platinum(II) and palladium(II) complexes of the type [M(bpy)(pip-dtc)]NO3 (where M=Pt(II) or Pd(II), bpy=2,2'-bipyridine, pip-dtc=piperidinedithiocarbamate) were synthesized by reaction between diaquo-2,2'-bipyridine Pt(II)/Pd(II) nitrate and sodium salt of dithiocarbamate. These cationic water soluble complexes were characterized by elemental analysis, molar conductance, IR, electronic and 1H NMR spectroscopic studies. The cyclic dithiocarbamate was found to coordinate as bidentate fasion with Pt(II) or Pd(II) center. Their biological activities were tested against chronic myelogenous leukemia cell line, K562, at micromolar concentration. The obtained cytotoxic concentration (IC50) values were much lower than cisplatin. The interaction of these complexes with highly polymerized calf thymus DNA (ct-DNA) was extensively studied by means of electronic absorption, fluorescence, circular dichroism and other measurements. The experimental results, thermodynamic and binding parameters, suggested that these complexes cooperatively bind to DNA presumably via intercalation. Moreover, the tendency of the Pt(II) complex to interact with DNA was more than that of Pd(II) complex.

  18. A first-principles study on the interaction of biogas with noble metal (Rh, Pt, Pd) decorated nitrogen doped graphene as a gas sensor: A DFT study

    Science.gov (United States)

    Zhao, Chunjiang; Wu, Huarui

    2018-03-01

    Density functional theory calculations are carried out to investigate the adsorption characteristics of methane (CH4), carbon dioxide (CO2), hydrogen (H2), hydrogen sulfide (H2S), nitrogen (N2), and oxygen (O2) on the surface of pyridine-like nitrogen doped graphene (PNG) as well as noble metal (Rh, Pt, Pd) decorated PNG to elaborate their potentials as gas sensors. The adsorption intensities of biogas on noble metal (Rh, Pt, Pd) decorated PNG are in the order of O2> H2S> N2> CH4> CO2> H2, which are corresponded to the order of their sensitivity on surface. Compared with biogas adsorption on pristine PNG, there exist higher adsorption ability, higher charge transfer and higher orbital hybridization upon adsorption on noble metal (Rh, Pt, Pd) decorated PNG. Consequently, the noble metal (Rh, Pt, Pd) decorated PNG can transform the existence of CH4, CO2, H2, H2S, N2, and O2 molecules into electrical signal and they could potentially be used as ideal sensors for detection of biogas in ambient situation.

  19. Signal Amplification Strategy of Triple-Layered Core-Shell Au@Pd@Pt Nanoparticles for Ultrasensitive Immunoassay Detection of Squamous Cell Carcinoma Antigen.

    Science.gov (United States)

    Zhang, Xiaoyue; Du, Bin; Wu, Dan; Ma, Hongmin; Zhang, Yong; Li, He; Wei, Qin

    2015-02-01

    A novel and effective nonenzymatic immunosensor for the sensitive detection of squamous cell carcinoma antigen (SCC- Ag) was described based on triple-layered core-shell Au@Pd@Pt nanoparticles (Au@Pd@Pt NPs). To prepare the immunosensor, primary anti-SCC antibodies (Ab1) were immobilized onto nanoporous gold films (NPGF) of a modified glassy carbon electrode. Au@Pd@Pt NPs that possess strong catalytic activity for the reduction of H2O2 were used as catalytic labels of secondary anti-SCC antibodies (Ab2). Because of the catalytic activities of Au@Pd@Pt NPs and the large surface area of the NPGF, high sensitivity was achieved for the detection of SCC-Ag. The prepared immunosensor showed remarkable results, such as low detection limits (0.6 pg/mL), a wide linear range (0.001-10.0 ng/mL) and high stability and selectivity in the detection of SCC-Ag. Furthermore, the prepared immunosensor exhibited promising properties, which may be useful for real serum sample tests.

  20. Moisture-Induced Delayed Alumina Scale Spallation on a Ni(Pt)Al Coating

    Science.gov (United States)

    Smialek, James L.

    2009-01-01

    Delayed interfacial scale failure takes place after cooling for samples of a Ni(Pt)Al-coated CMSX4 single crystal superalloy, cycled at 1150 C for up to 2000 hr. One sample exhibited premature coating grain boundary wrinkling, alumina scale spallation to bare metal, and a final weight loss of 3.3 mg/cm2 . Spallation under ambient conditions was monitored with time after cooldown and was found to continue for 24 hr. This produced up to 0.05 mg/cm2 additional loss for each hold, accumulating 0.7 mg/cm 2 (20 percent of the total) over the course of the test. After test termination, water immersion produced an additional 0.15 mg/cm2 loss. (A duplicate sample produced much less wrinkling and time dependent spalling, maintaining a net weight gain.) The results are consistent with the general phenomena of moisture-induced delayed spallation (MIDS) of mature, distressed alumina scales formed on oxidation resistant M-Al alloys. Relative ambient humidity is discussed as the factor controlling adsorbed moisture, reaction with the substrate, and hydrogen effects on interface strength.

  1. Valence-Band Electronic Structures of High-Pressure-Phase PdF2-type Platinum-Group Metal Dioxides MO2 (M = Ru, Rh, Ir, and Pt)

    Science.gov (United States)

    Soda, Kazuo; Kobayashi, Daichi; Mizui, Tatsuya; Kato, Masahiko; Shirako, Yuichi; Niwa, Ken; Hasegawa, Masashi; Akaogi, Masaki; Kojitani, Hiroshi; Ikenaga, Eiji; Muro, Takayuki

    2018-04-01

    The valence-band electronic structures of high-pressure-phase PdF2-type (HP-PdF2-type) platinum-group metal dioxides MO2 (M = Ru, Rh, Ir, and Pt) were studied by synchrotron radiation photoelectron spectroscopy and first-principles calculations. The obtained photoelectron spectra for HP-PdF2-type RuO2, RhO2, and IrO2 agree well with the calculated valence-band densities of states (DOSs) for these compounds, indicating their metallic properties, whereas the DOS of HP-PdF2-type PtO2 (calculated in the presence and absence of spin-orbit interactions) predicts that this material may be metallic or semimetallic, which is inconsistent with the electric conductivity reported to date and the charging effect observed in current photoelectron measurements. Compared with the calculated results, the valence-band spectrum of PtO2 appears to have shifted toward the high-binding-energy side and reveals a gradual intensity decrease toward the Fermi energy EF, implying a semiconductor-like electronic structure. Spin-dependent calculations predict a ferromagnetic ground state with a magnetization of 0.475 μB per formula unit for HP-PdF2-type RhO2.

  2. Effects of temperature dependent pre-amorphization implantation on NiPt silicide formation and thermal stability on Si(100)

    International Nuclear Information System (INIS)

    Ozcan, Ahmet S.; Wall, Donald; Jordan-Sweet, Jean; Lavoie, Christian

    2013-01-01

    Using temperature controlled Si and C ion implantation, we studied the effects of pre-amorphization implantation on NiPt alloy silicide phase formation. In situ synchrotron x-ray diffraction and resistance measurements were used to monitor phase and morphology evolution in silicide films. Results show that substrate amorphization strongly modulate the nucleation of silicide phases, regardless of implant species. However, morphological stability of the thin films is mainly enhanced by C addition, independently of the amorphization depth.

  3. Pt nanoparticles residing in the pores of porous LaNiO₃ nanocubes as high-efficiency electrocatalyst for direct methanol fuel cells.

    Science.gov (United States)

    Yu, Nan; Kuai, Long; Wang, Qing; Geng, Baoyou

    2012-09-07

    Pt-filled porous LaNiO₃ cubes are prepared through a facile route. The characterizations reveal that large numbers of pores (9-10 nm) are distributed homogeneously in porous LaNiO₃ cubes. The Pt nanoparticles residing in the pores of porous LaNiO₃ cubes are about 5 nm in size. The investigation on the electrocatalytic activity reveals that electrocatalytic activity of the obtained Pt loaded porous LaNiO₃ nanocubes exhibit a significantly improved electrochemical active surface area (EASA) and a remarkably enhanced electrocatalytic performance toward methanol oxidation. The results are significant for improving the efficiency of Pt-based catalysts for DMFCs as well as the applications of perovskite compounds.

  4. Sintered Cr/Pt and Ni/Au ohmic contacts to B{sub 12}P{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Frye, Clint D., E-mail: frye6@llnl.gov [Lawrence Livermore National Laboratory, Livermore, California 94550 and Department of Chemical Engineering, Kansas State University, Manhattan, Kansas 66506 (United States); Kucheyev, Sergei O.; Voss, Lars F.; Conway, Adam M.; Shao, Qinghui; Nikolić, Rebecca J., E-mail: nikolic1@llnl.gov [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Edgar, James H. [Department of Chemical Engineering, Kansas State University, Manhattan, Kansas 66506 (United States)

    2015-05-15

    Icosahedral boron phosphide (B{sub 12}P{sub 2}) is a wide-bandgap semiconductor possessing interesting properties such as high hardness, chemical inertness, and the reported ability to self-heal from irradiation by high energy electrons. Here, the authors developed Cr/Pt and Ni/Au ohmic contacts to epitaxially grown B{sub 12}P{sub 2} for materials characterization and electronic device development. Cr/Pt contacts became ohmic after annealing at 700 °C for 30 s with a specific contact resistance of 2 × 10{sup −4} Ω cm{sup 2}, as measured by the linear transfer length method. Ni/Au contacts were ohmic prior to any annealing, and their minimum specific contact resistance was ∼l–4 × 10{sup −4} Ω cm{sup 2} after annealing over the temperature range of 500–800 °C. Rutherford backscattering spectrometry revealed a strong reaction and intermixing between Cr/Pt and B{sub 12}P{sub 2} at 700 °C and a reaction layer between Ni and B{sub 12}P{sub 2} thinner than ∼25 nm at 500 °C.

  5. Ternary indides Eu{sub 2}Pd{sub 2}In and Eu{sub 2}Pt{sub 2}In

    Energy Technology Data Exchange (ETDEWEB)

    Muts, Ihor [Inorganic Chemistry Department, Ivan Franko National University of Lviv (Ukraine); Institut fuer Anorganische und Analytische Chemie, Westfaelische Wilhelms-Universitaet Muenster (Germany); Zaremba, Vasyl I. [Inorganic Chemistry Department, Ivan Franko National University of Lviv (Ukraine); Poettgen, Rainer [Institut fuer Anorganische und Analytische Chemie, Westfaelische Wilhelms-Universitaet Muenster (Germany)

    2012-01-15

    The indides Eu{sub 2}Pd{sub 2}In and Eu{sub 2}Pt{sub 2}In were synthesized from the elements in sealed tantalum tubes in an induction furnace. The samples were characterized by powder X-ray diffraction. The structures were refined on the basis of single-crystal X-ray diffractometer data: HT-Pr{sub 2}Co{sub 2}Al type, C2/c, a = 1035.7(2), b = 592.9(1), c = 823.6(2) pm, β = 104.26(1) , wR2 = 0.026, 1075 F{sup 2} values, 25 variables for Eu{sub 2}Pd{sub 2}In and a = 1017.2(2), b = 588.7(1), c = 826.5(1) pm, β = 103.76(1) , wR2 = 0.062, 706 F{sup 2} values, 25 variables for Eu{sub 2}Pt{sub 2}In. The indium atoms have four platinum (palladium) neighbors in strongly distorted tetrahedral coordination at Pt-In and Pd-In distances ranging from 273 to 275 pm. These InPd{sub 4/2} and InPt{sub 4/2} units are condensed via common edges to infinite InPd{sub 2} and InPt{sub 2} chains, which are surrounded by the europium atoms. The chains form the motif of hexagonal rod packing. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  6. Effect of reduction conditions on electrocatalytic activity of a ternary PtNiCr/C catalyst for methanol electro-oxidation

    International Nuclear Information System (INIS)

    Jeon, Min Ku; Zhang Yuan; McGinn, Paul J.

    2009-01-01

    The effect of reduction conditions on a Pt 28 Ni 36 Cr 36 /C catalyst was investigated by using two different reduction methods: hydrogen reduction and NaBH 4 reduction. In hydrogen reduced catalysts, dissolution of metallic Ni and Cr was observed during cyclic voltammetry (CV) tests, and a larger amount of Ni and Cr was dissolved when reduced at higher temperatures. For methanol electro-oxidation, the highest specific current density of 1.70 A m -2 at 600 s of the chronoamperometry tests was observed in the catalyst reduced at 300 deg. C, which was ∼24 times that of a Pt/C catalyst (0.0685 A m -2 ). In NaBH 4 reduced catalysts, formation of an amorphous phase and a more Pt-rich surface was observed in X-ray diffraction and CV results, respectively, with increasing amounts of NaBH 4 . When reduced by 50 times of the stoichiometric amount of NaBH 4 , the PtNiCr/C catalyst (PtNiCr-50t) showed a current density of 34.1 A g noblemetal -1 , which was 81% higher than the 18.8 A g noblemetal -1 value of a PtRu/C catalyst at 600 s of the chronoamperometry tests. After 13 h of chronoamperometry testing, the activity of the PtNiCr-50t (15.0 A g noblemetal -1 ) was 110% higher than the PtRu/C catalyst (7.15 A g noblemetal -1 ). The PtNiCr/C catalyst shows promise as a Ru-free methanol oxidation catalyst

  7. Facile Pd(II)- and Ni(II)-Catalyzed Isomerization of Terminal Alkenes into 2-Alkenes

    Science.gov (United States)

    Lim, Hwan Jung; Smith, Craig R.; RajanBabu, T. V.

    2009-01-01

    Mono- and 2,2′-di-substituted terminal alkenes can be isomerized into the more stable internal Z- and E- alkenes by treating them with catalytic amounts of [(allyl)PdCl]2 or [(allyl)NiBr]2, a triarylphosphine and silver triflate at room temperature. The isomeric ratio (E:Z) depends on the alkenes, the (E)-isomer being the major one. The reaction is tolerant to a wide variety of functional groups including other reactive olefins. Unlike the more reactive Ir catalysts, monosubstituted alkenes give almost exclusively the 2-alkenes. Direct comparison to two of the best-known catalysts for this process, (Ir(PCy3)3]+ [BPh4]−, and Grubbs Generation II metathesis catalyst) is also reported. PMID:19441793

  8. Structural, thermodynamical, and transport properties of undercooled binary Pd-Ni alloys

    International Nuclear Information System (INIS)

    Ozdemir Kart, S.; Tomak, M.; UludoGan, M.; CaGin, T.

    2006-01-01

    The solidification properties of Pd-Ni alloys are studied with constant-pressure, constant-temperature (TPN), and constant-volume, constant-temperature (TVN) molecular dynamics simulations based on quantum Sutton-Chen potential. Whether the system forms the glass structure or it transforms into ordered state is checked at various cooling rates ranging from 10-bar K/ps to 0.05-bar K/ps. The effect of concentration and cooling rates on the glass transition temperature is examined. The behavior of heat capacity at constant pressure (C p ) in glass and liquid state is analyzed. Glass forming ability is also investigated by means of transport properties such as diffusion and shear viscosity. Strength parameter calculated from shear viscosity data indicates fragile-liquid behavior. The results show that the mismatch in atomic size and having the eutectic composition are important factors for glass forming

  9. Structural, thermodynamical, and transport properties of undercooled binary Pd-Ni alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ozdemir Kart, S. [Department of Physics, Pamukkale University, 20020 Denizli (Turkey); Tomak, M. [Department of Physics, Middle East Technical University, 06531 Ankara (Turkey); UludoGan, M. [Department of Chemical Engineering, Texas A and M University, TX 77845-3122 (United States); CaGin, T. [Department of Chemical Engineering, Texas A and M University, TX 77845-3122 (United States)]. E-mail: ozsev@pau.edu.tr

    2006-11-05

    The solidification properties of Pd-Ni alloys are studied with constant-pressure, constant-temperature (TPN), and constant-volume, constant-temperature (TVN) molecular dynamics simulations based on quantum Sutton-Chen potential. Whether the system forms the glass structure or it transforms into ordered state is checked at various cooling rates ranging from 10-bar K/ps to 0.05-bar K/ps. The effect of concentration and cooling rates on the glass transition temperature is examined. The behavior of heat capacity at constant pressure (C{sub p}) in glass and liquid state is analyzed. Glass forming ability is also investigated by means of transport properties such as diffusion and shear viscosity. Strength parameter calculated from shear viscosity data indicates fragile-liquid behavior. The results show that the mismatch in atomic size and having the eutectic composition are important factors for glass forming.

  10. Ultrasonic-electrodeposition of PtPd alloy nanoparticles on ionic liquid-functionalized graphene paper: towards a flexible and versatile nanohybrid electrode

    Science.gov (United States)

    Sun, Yimin; Zheng, Huaming; Wang, Chenxu; Yang, Mengmeng; Zhou, Aijun; Duan, Hongwei

    2016-01-01

    Here we fabricate a new type of flexible and versatile nanohybrid paper electrode by ultrasonic-electrodeposition of PtPd alloy nanoparticles on freestanding ionic liquid (IL)-functionalized graphene paper, and explore its multifunctional applications in electrochemical catalysis and sensing systems. The graphene-based paper materials demonstrate intrinsic flexibility, exceptional mechanical strength and high electrical conductivity, and therefore can serve as an ideal freestanding flexible electrode for electrochemical devices. Furthermore, the functionalization of graphene with IL (i.e., 1-butyl-3-methylimidazolium tetrafluoroborate) not only increases the electroactive surface area of a graphene-based nanohybrid paper electrode, but also improves the adhesion and dispersion of metal nanoparticles on the paper surface. These unique attributes, combined with the merits of an ultrasonic-electrodeposition method, lead to the formation of PtPd alloy nanoparticles on IL-graphene paper with high loading, uniform distribution, controlled morphology and favourable size. Consequently, the resultant nanohybrid paper electrode exhibits remarkable catalytic activity as well as excellent cycle stability and improved anti-poisoning ability towards electrooxidation of fuel molecules such as methanol and ethanol. Furthermore, for nonenzymatic electrochemical sensing of some specific biomarkers such as glucose and reactive oxygen species, the nanohybrid paper electrode shows high selectivity, sensitivity and biocompatibility in these bio-catalytic processes, and can be used for real-time tracking hydrogen peroxide secretion by living human cells. All these features demonstrate its promising application as a versatile nanohybrid electrode material in flexible and lightweight electrochemical energy conversion and biosensing systems such as bendable on-chip power sources, wearable/implantable detectors and in vivo micro-biosensors.Here we fabricate a new type of flexible and

  11. Defective graphene supported MPd12 (M = Fe, Co, Ni, Cu, Zn, Pd) nanoparticles as potential oxygen reduction electrocatalysts: A first-principles study

    KAUST Repository

    Liu, Xin

    2013-01-24

    We studied the electronic structure of MPd12 (M = Fe, Co, Ni, Cu, Zn, Pd) nanoparticles deposited on graphene substrates and their reactivity toward O adsorption, which are directly related to the catalytic performance of these composites in oxygen reduction reaction, by first-principles-based calculations. We found that the alloying between M and Pd can enhance the stability of nanoparticles and promote their oxygen reduction activity to be comparable with that of Pt(111). The defective graphene substrate can provide anchoring sites for these nanoparticles by forming strong metal-substrate interaction. The interfacial interaction can contribute to additional stability and further tune the averaged d-band center of the deposited alloy nanoparticles, resulting in strong interference on the O adsorption. As the O adsorption on these composites is weakened, the oxygen reduction reaction kinetics over these composites will also be promoted. These composites are thus expected to exhibit both high stability and superior catalytic performance in oxygen reduction reaction. © 2013 American Chemical Society.

  12. Hydrocracking of α-Cellulose Using Co, Ni, and Pd Supported on Mordenite Catalysts

    Directory of Open Access Journals (Sweden)

    Wega Trisunaryanti

    2018-02-01

    Full Text Available Hydrocracking of α-cellulose has been conducted in a semi-batch reactor at 400, 450, and 500 °C with hydrogen flow (30 mL/min. for 4 h. Mordenite (MOR and Co, Ni and Pd metal supported on the MOR were used as solid catalysts. The catalysts were characterized using X-ray Diffractometer (XRD, Fourier Transform Infrared (FTIR spectroscopy, and Scanning Electron Microscopy (SEM to evaluate the physical-chemical properties. Energy Dispersive X-ray (EDX and Inductively Coupled Plasma (ICP were used to analyze the amount of metal impregnated on the catalysts. The liquid product was analyzed using Gas Chromatograph-Mass Spectroscopy (GC-MS. Thermal hydrocracking was also conducted at 450 °C with the amount of liquid product was 37.86 wt.%. The highest liquid conversion obtained by mordenite catalyst was 94.66 wt.% at 450 °C and the highest liquid conversion (98.08 wt.% was reached by Pd/MOR catalyst at 400 °C.

  13. Mechanistic insight into the enhanced photocatalytic activity of single-atom Pt, Pd or Au-embedded g-C3N4

    Science.gov (United States)

    Tong, Tong; Zhu, Bicheng; Jiang, Chuanjia; Cheng, Bei; Yu, Jiaguo

    2018-03-01

    Single atoms of platinum (Pt), palladium (Pd) or gold (Au) trapped by two-dimensional graphitic carbon nitride (g-C3N4) exhibit superior photocatalytic performance. However, the underlying mechanism of single-atom noble metal/g-C3N4 photocatalytic system is still unclear. Herein, the structural, electronic and optical properties of single-atom Pt, Pd and Au loaded on bilayer g-C3N4 (BL-g-C3N4) substrate were investigated by density functional theory (DFT) simulations. The results indicate that single-atom Pt/Pd/Au loading can significantly narrow the band gap of g-C3N4 and thus increase its light absorption in the visible-light region. Rather than being adsorbed on the surface, Pt and Pd atoms tend to be embedded into g-C3N4 interlayer and act as bridges to facilitate the interlayer charge carrier transfer due to the effects of conduction band offset. In particular, an internal electric field is generated in Pt/BL-g-C3N4, which is further beneficial for separating charge carrier of photoexcited g-C3N4. By contrast, Au can only be adsorbed on the g-C3N4 surface (in the six-fold cavity) and deliver a limited amount of charge carrier excited in the N-conjugated aromatic pore of g-C3N4 surface. Our finding is conducive to understanding the interactive relationship between single-atom noble metal co-catalysts and g-C3N4 and to the design of high-efficiency photocatalyst.

  14. Localized Pd Overgrowth on Cubic Pt Nanocrystals for Enhanced Electrocatalytic Oxidation of Formic Acid

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyunjoo; Habas, Susan; Somorjai, Gabor; Yang, Peidong

    2007-12-14

    Single crystalline surface such as (100), (111), (110) has been studied as an idealized platform for electrocatalytic reactions since the atomic arrangement affects a catalytic property. The secondary metal deposition on these surfaces also alters the catalytic property often showing improvement such as poisoning decrease. On the other hand, electrocatalysts used for practical purpose usually have a size on the order of nanometers. Therefore, linking the knowledge from single crystalline studies to nanoparticle catalysts is of enormous importance. Recently, the Pt nanoparticles which surface structure was preferentially oriented was synthesized and used as electrocatalysts. Here, we demonstrate a rational design of a binary metallic nanocatalyst based on the single crystalline study.

  15. Ni3FeN-Supported Fe3Pt Intermetallic Nanoalloy as a High-Performance Bifunctional Catalyst for Metal-Air Batteries.

    Science.gov (United States)

    Cui, Zhiming; Fu, Gengtao; Li, Yutao; Goodenough, John B

    2017-08-07

    Electrocatalysts for both the oxygen reduction and evolution reactions (ORR and OER) are vital for the performances of rechargeable metal-air batteries. Herein, we report an advanced bifunctional oxygen electrocatalyst consisting of porous metallic nickel-iron nitride (Ni 3 FeN) supporting ordered Fe 3 Pt intermetallic nanoalloy. In this hybrid catalyst, the bimetallic nitride Ni 3 FeN mainly contributes to the high activity for the OER while the ordered Fe 3 Pt nanoalloy contributes to the excellent activity for the ORR. Robust Ni 3 FeN-supported Fe 3 Pt catalysts show superior catalytic performance to the state-of-the-art ORR catalyst (Pt/C) and OER catalyst (Ir/C). The Fe 3 Pt/Ni 3 FeN bifunctional catalyst enables Zn-air batteries to achieve a long-term cycling performance of over 480 h at 10 mA cm -2 with high efficiency. The extraordinarily high performance of the Fe 3 Pt/Ni 3 FeN bifunctional catalyst makes it a very promising air cathode in alkaline electrolyte. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Thermomechanical behavior and microstructural evolution of a Ni(Pd)-rich Ni{sub 24.3}Ti{sub 49.7}Pd{sub 26} high temperature shape memory alloy

    Energy Technology Data Exchange (ETDEWEB)

    Benafan, O., E-mail: othmane.benafan@nasa.gov [NASA Glenn Research Center, Structures and Materials Division, Cleveland, OH 44135 (United States); Garg, A. [University of Toledo, Toledo, OH 43606 (United States); NASA Glenn Research Center, Structures and Materials Division, Cleveland, OH 44135 (United States); Noebe, R.D.; Bigelow, G.S.; Padula, S.A. [NASA Glenn Research Center, Structures and Materials Division, Cleveland, OH 44135 (United States); Gaydosh, D.J. [Ohio Aerospace Institute, Cleveland, OH 44142 (United States); NASA Glenn Research Center, Structures and Materials Division, Cleveland, OH 44135 (United States); Vaidyanathan, R. [Advanced Materials Processing and Analysis Center, Materials Science and Engineering Department, University of Central Florida, Orlando, FL 32816 (United States); Clausen, B.; Vogel, S.C. [Materials Science and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2015-09-15

    Highlights: • A Ni(Pd)-rich Ni{sub 24.3}Ti{sub 49.7}Pd{sub 26} high temperature shape memory alloy was characterized. • Aging resulted in fine dispersion of nano-sized precipitates. • Thermomechanical cycling resulted in dimensional instabilities due to lattice defects. • A two-way shape memory effect strain of 2% strain was obtained after cycling. - Abstract: The effect of thermomechanical cycling on a slightly Ni(Pd)-rich Ni{sub 24.3}Ti{sub 49.7}Pd{sub 26} (near stochiometric Ni–Ti basis with Pd replacing Ni) high temperature shape memory alloy was investigated. Aged tensile specimens (400 °C/24 h/furnace cooled) were subjected to constant-stress thermal cycling in conjunction with microstructural assessment via in situ neutron diffraction and transmission electron microscopy (TEM), before and after testing. It was shown that in spite of the slightly Ni(Pd)-rich composition and heat treatment used to precipitation harden the alloy, the material exhibited dimensional instabilities with residual strain accumulation reaching 1.5% over 10 thermomechanical cycles. This was attributed to insufficient strengthening of the material (insufficient volume fraction of precipitate phase) to prevent plasticity from occurring concomitant with the martensitic transformation. In situ neutron diffraction revealed the presence of retained martensite while cycling under 300 MPa stress, which was also confirmed by transmission electron microscopy of post-cycled samples. Neutron diffraction analysis of the post-thermally-cycled samples under no-load revealed residual lattice strains in the martensite and austenite phases, remnant texture in the martensite phase, and peak broadening of the austenite phase. Texture developed in the martensite phase was composed mainly of those martensitic tensile variants observed during thermomechanical cycling. Presence of a high density of dislocations, deformation twins, and retained martensite was revealed in the austenite state via in

  17. Electric-field effect on magnetic anisotropy in Pt/Co/Pd/MgO structures deposited on GaAs and Si substrates

    Science.gov (United States)

    Hayashi, Yohei; Hibino, Yuki; Matsukura, Fumihiro; Miwa, Kazumoto; Ono, Shimpei; Hirai, Takamasa; Koyama, Tomohiro; Ohno, Hideo; Chiba, Daichi

    2018-01-01

    We investigate the electric-field effect on the magnetic anisotropy in perpendicularly magnetized Pt/Co/Pd/MgO structures deposited on GaAs and Si substrates as a function of temperature. An electric field is applied to the Pd surface through a 2-nm-thick insulating MgO layer by forming an electric double layer using an ionic liquid. We find that the electric-field dependence of the anisotropy is similar but clearly different between the two samples at low temperatures. The difference is expected to be related to the difference in the internal strain of the two structures.

  18. A dual-type responsive electrochemical immunosensor for quantitative detection of PCSK9 based on n-C60-PdPt/N-GNRs and Pt-poly (methylene blue) nanocomposites.

    Science.gov (United States)

    Li, Yan; He, Junlin; Chen, Jun; Niu, Yazhen; Zhao, Yilin; Zhang, Yuchan; Yu, Chao

    2018-03-15

    In this study, a dual-type responsive electrochemical immunosensor was developed for the quantitative detection of proprotein convertase subtilisin/kexin type 9 (PCSK9), a potential biomarker of cardiovascular disease in serum. N-doped graphene nanoribbons (N-GNRs) with good conductivity were used as the sensing matrix modifying the glassy carbon electrode. Palladium platinum alloy (PdPt) nanoparticles with high catalytic performance toward the reduction of hydrogen peroxide (H 2 O 2 ) were reduced onto amino-functionalized fullerene (n-C 60 -PdPt) and significantly amplified the electrochemical signal recorded by the amperometric i-t curve. Furthermore, staphylococcus protein A (SPA) with antibody orientation function was introduced to improve the immunoreaction efficiency. Accordingly, a label-free immunosensor was fabricated based on n-C 60 -PdPt/N-GNRs for the quick detection of PCSK9. Meanwhile, to realize ultrasensitive detection of PCSK9, Pt-poly (methylene blue) (Pt-PMB) nanocomposites synthesized by a one-pot method for the first time were used as a novel signal label, which exhibited uniform morphology as well as good conductivity and produced an electrochemical signal recorded by differential pulse voltammetry (DPV). Herein, a novel sandwich-type immunosensor was designed using n-C 60 -PdPt/N-GNRs as the sensing matrix and Pt-PMB as the signal label for sensitive detection of PCSK9. Under optimal conditions, the label-free immunosensor showed a linear range of 10pgmL -1 to 100ngmL -1 with a detection limit of 3.33pgmL -1 (S/N=3), and the sandwich-type immunosensor exhibited a linear range of 100 fg mL -1 to 100ngmL -1 with a detection limit of 0.033pgmL -1 (S/N=3) for PCSK9 detection, indicating its potential application in clinical bioassay analysis. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Element-selective investigation of femtosecond spin dynamics in NiPd magnetic alloys using extreme ultraviolet radiation

    Science.gov (United States)

    Gang, Seung-gi; Adam, Roman; Plötzing, Moritz; von Witzleben, Moritz; Weier, Christian; Parlak, Umut; Bürgler, Daniel E.; Schneider, Claus M.; Rusz, Jan; Maldonado, Pablo; Oppeneer, Peter M.

    2018-02-01

    We studied femtosecond spin dynamics in NixPd1 -x magnetic thin films by optically pumping the system with infrared (1.55 eV) laser pulses and subsequently recording the reflectivity of extreme ultraviolet (XUV) pulses synchronized with the pump pulse train. XUV light in the energy range from 20 to 72 eV was produced by laser high-harmonic generation. The reflectivity of XUV radiation at characteristic resonant energies allowed separate detection of the spin dynamics in the elemental subsystems at the M2 ,3 absorption edges of Ni (68.0 and 66.2 eV) and N2 ,3 edges of Pd (55.7 and 50.9 eV). The measurements were performed in transversal magneto-optical Kerr effect geometry. In static measurements, we observed a magnetic signature of the Pd subsystem due to an induced magnetization. Calculated magneto-optical asymmetries based on density functional theory show close agreement with the measured results. Femtosecond spin dynamics measured at the Ni absorption edges indicates that increasing the Pd concentration, which causes a decrease in the Curie temperature TC, results in a drop of the demagnetization time τM, contrary to the τM˜1 /TC scaling expected for single-species materials. This observation is ascribed to the increase of the Pd-mediated spin-orbit coupling in the alloy.

  20. Characterization of Ternary NiTiPd High-Temperature Shape-Memory Alloys under Load-Biased Thermal Cycling

    Science.gov (United States)

    Bigelow, Glen S.; Padula, Santo A.; Noebe, Ronald D.; Garg, Anita; Gaydosh, Darrell

    2010-01-01

    While NiTiPd alloys have been extensively studied for proposed use in high-temperature shape-memory applications, little is known about the shape-memory response of these materials under stress. Consequently, the isobaric thermal cyclic responses of five (Ni,Pd)49.5Ti50.5 alloys with constant stoichiometry and Pd contents ranging from 15 to 46 at. pct were investigated. From these tests, transformation temperatures, transformation strain (which is proportional to work output), and unrecovered strain per cycle (a measure of dimensional instability) were determined as a function of stress for each alloy. It was found that increasing the Pd content over this range resulted in a linear increase in transformation temperature, as expected. At a given stress level, work output decreased while the amount of unrecovered strain produced during each load-biased thermal cycle increased with increasing Pd content, during the initial thermal cycles. However, continued thermal cycling at constant stress resulted in a saturation of the work output and nearly eliminated further unrecovered strain under certain conditions, resulting in stable behavior amenable to many actuator applications.

  1. Self-assembly growth of alloyed NiPt nanocrystals with holothuria-like shape for oxygen evolution reaction with enhanced catalytic activity

    Directory of Open Access Journals (Sweden)

    Tao Ding

    2016-01-01

    Full Text Available Self-assembly growth of alloyed NiPt nanocrystals with holothuria-like wire shape has been achieved via a facile and moderate hydrothermal process at 120 °C for 1 h from the reaction of nickel nitrate and chloroplatinic acid in alkaline solution in the presence of ethanediamine and hydrazine hydrate. The holothuria-like alloyed NiPt wires are Ni-rich in composition (Ni23.6Pt and uniform in diameter with many tiny tips outstretched from the wires surface. The holothuria-like wires are assembled from granular subunits with the assistance of capping molecular of ethanediamine and the wires display an improved oxygen evolution reaction catalytic activity.

  2. One-Pot Synthesis of Size- and Composition-Controlled Ni-Rich NiPt Alloy Nanoparticles in a Reverse Microemulsion System and Their Application

    KAUST Repository

    Biausque, Gregory

    2017-08-16

    Bimetallic nanoparticles have been the subject of numerous research studies in the nanotechnology field, in particular for catalytic applications. Control of the size, morphology, and composition has become a key challenge due to the relationship between these parameters and the catalytic behavior of the particles in terms of activity, selectivity, and stability. Here, we present a one-pot air synthesis of 2 nm NiPt nanoparticles with a narrow size distribution. Control of the size and composition of the alloy particles is achieved at ambient temperature, in the aqueous phase, by the simultaneous reduction of nickel and platinum precursors with hydrazine, using a reverse microemulsion system. After deposition on an alumina support, this Ni-rich nanoalloy exhibits unprecedented stability under the harsh conditions of methane dry reforming.

  3. Multi-metallic Nanomaterials From Ni, Ag, Pd With Pt's Catalytic Activity

    KAUST Repository

    Huang, Kuo-Wei

    2015-06-04

    A trimetallic catalyst that is a combination of nickel, silver and palladium metal is described. The trimetallic catalyst can be used to produce hydrogen and is useful as a replacement for platinum in hydrogenation reactions.

  4. Observation of convection phenomenon by high-performance transparent heater based on Pt-decorated Ni micromesh

    Directory of Open Access Journals (Sweden)

    Han-Jung Kim

    2017-02-01

    Full Text Available In this study, we report for the first time on the convection phenomenon for the consistent and sensitive detection of target materials (particulate matter (PM or gases with a high-performance transparent heater. The high-performance transparent heater, based on Pt-decorated Ni micromesh, was fabricated by a combination of transfer printing process and Pt sputtering. The resulting transparent heater exhibited excellent mechanical durability, adhesion with substrates, flexibility, and heat-generating performance. We monitored the changes in the PM concentration and temperature in an airtight chamber while operating the heater. The temperature in the chamber was increased slightly, and the PM2.5 concentration was increased by approximately 50 times relative to the initial state which PM is deposed in the chamber. We anticipate that our experimental findings will aid in the development and application of heaters for sensors and actuators as well as transparent electrodes and heating devices.

  5. Synthesis of nanoporous CuO/TiO2/Pd-NiO composite catalysts by chemical dealloying and their performance for methanol and ethanol electro-oxidation

    Science.gov (United States)

    Niu, Mengying; Xu, Wence; Zhu, Shengli; Liang, Yanqin; Cui, Zhenduo; Yang, Xianjin; Inoue, Akihisa

    2017-09-01

    Nanoporous CuO/TiO2/Pd-NiO-x (x = 0, 1, 3, 5, 7 at%) catalysts have been synthesized by dealloying Cu-Ti-Pd-Ni alloy ribbons in acid solution. The nanoporous structure and chemical composition of the catalysts distribute uniformly. Based on the electrochemical active area (EASA), electrocatalytic activity and stability, the np-CuO/TiO2/Pd-NiO-3 catalyst possesses the best performance for methanol and ethanol electro-oxidation. For methanol and ethanol electro-oxidation, the anodic current densities in forward scan of the np-CuO/TiO2/Pd-NiO-3 catalyst are about 5.6 times and 2.1 times larger than that of the np-CuO/TiO2/Pd catalyst, respectively. The introduction of NiO provides more electrochemical active sites due to the improved geometrical and bifunctional mechanism. NiO promotes the adsorption of oxygen-containing species (OHads) on the catalyst surface, and electron effect between Pd and Ni is favorable for charge transfer. This accelerates the removal of intermediate products during the oxidation process. The electrocatalytic processes of methanol and ethanol oxidation in alkaline solution are controlled by both charge transfer and diffusion.

  6. Interaction of NO with nanosized Ru-, Pd-, and Pt-Doped SnO2: electron paramagnetic resonance, Mössbauer, and electrical investigation.

    Science.gov (United States)

    Canevali, Carmen; Mari, Claudio Maria; Mattoni, Mariachiara; Morazzoni, Franca; Nodari, Luca; Ruffo, Riccardo; Russo, Umberto; Scotti, Roberto

    2005-04-21

    The mechanism of NO interaction with nanosized Ru(Pd,Pt)-doped SnO(2) was studied by electron paramagnetic resonance, Mössbauer, and electric resistance measurements. Three steps were proposed for the reaction between the semiconductor oxide and the gaseous component: (i) the formation of bielectronic oxygen vacancies (V(o)) in SnO(2); (ii) their single-ionization (V(o)(*)) with injection of electrons into the SnO(2) conduction band; (iii) the subsequent transfer of electrons from V(o)(*) to [Ru(Pd,Pt)](4+). The last process induces the formation of further oxygen vacancies which reduce the transition metal centers to lower oxidation states; the redox processes is enhanced and the electrical resistance in transition metal-doped SnO(2) is stronger modified with respect to the undoped material.

  7. Síntesis de nanoestructuras de Ru, Ni y Pt sobre soportes porosos utilizando CO₂ supercrítico

    OpenAIRE

    Morère Rodríguez, Jacobo

    2015-01-01

    En esta tesis doctoral se propone la utilización de CO2 supercrítico como medio de reacción en la fabricación de materiales compuestos nanoestructurados de Ru, Ni y Pt sobre distintos soportes inorgánicos mediante deposición con uidos supercríticos. Las propiedades de los uidos supercríticos son intermedias entre las de los líquidos y las de los gases. Sus propiedades de transporte son similares a las de los gases presentando baja viscosidad, alta difusividad y tensión super cial muy baja, ...

  8. Developing an aqueous approach for synthesizing Au and M@Au (M = Pd, CuPt) hybrid nanostars with plasmonic properties

    OpenAIRE

    Du, Jingshan; Yu, Junjie; Xiong, Yalin; Lin, Zhuoqing; Zhang, Hui; Yang, Deren

    2014-01-01

    Anisotropic Au nanoparticles show unique localized surface plasmon resonance (LSPR) properties, which make it attractive in optical, sensing, and biomedical applications. In this contribution, we report a general and facile strategy towards aqueous synthesis of Au and M@Au (M = Pd, CuPt) hybrid nanostars by reducing HAuCl4 with ethanolamine in the presence of cetyltrimethylammonium bromide (CTAB). According to electron microscopic observation and spectral monitoring, we found that the layered...

  9. Spin-orbit driven phenomena in the isoelectronic L1.sub.0./sub.-Fe(Pd,Pt) alloys from first principles

    Czech Academy of Sciences Publication Activity Database

    Kudrnovský, Josef; Drchal, Václav; Turek, Ilja

    2017-01-01

    Roč. 96, č. 21 (2017), s. 1-7, č. článku 214437. ISSN 2469-9950 R&D Projects: GA ČR GA15-13436S Institutional support: RVO:68378271 ; RVO:68081723 Keywords : anomalous Hall effect * Gilbert damping * partial order * first- principles * Fe(Pd,Pt) alloys Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 3.836, year: 2016

  10. Photochemical synthesis of noble metal (Ag, Pd, Au, Pt) on graphene/ZnO multihybrid nanoarchitectures as electrocatalysis for H2O2 reduction.

    Science.gov (United States)

    Gu, Hui; Yang, Yan; Tian, Jixiang; Shi, Guoyue

    2013-07-24

    For the first time, a series of noble metal (Ag, Au, Pd, and Pt) nanoparticles (NPs) based on new functional graphene were successfully achieved via UV-assisted photocatalytic reduction by ZnO nanorods. The whole preparation strategy for constructing noble metal deposited graphene sheets/ZnO (GS/ZnO) was elucidated in detail in this work. First, graphene oxide based two-dimensional carbon nanostructures served as a support to disperse ZnO nanorods through a hydrothermal route. The ZnO nanorods were self-assembled onto the surface of graphene sheets, forming GS/ZnO nanocomposite, and the graphene oxide was reduced, yielding reduced graphene sheets in this synthetic procedure. Second, the GS/ZnO films were further employed as supporting materials for the dispersion of metal nanoparticles. Photogenerated electrons from UV-irradiated ZnO were transported across GS to stepwise and respectively reduce v μL metal ions (Ag(+), Pd(2+), AuCl4(-), PtCl6(2-), 20 mg/mL) into metal (Ag, Pd, Au, Pt) NPs at a location distinct from the ZnO anchored site, forming five graphene-based hybrid nanocomposites designated as GS/ZnO, GS/ZnO@Agv, GS/ZnO@Pdv, GS/ZnO@Auv, GS/ZnO@Ptv, respectively. The obtained mutihybrid nanoarchitectured materials were clearly characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). According to the diameters and distribution, the four metal NPs on GS/ZnO were divided into two categories: Ag&Au and Pd&Pt. Their difference was rooted in the rival abilities of gathering electron between graphene and different metal islands in the photochemical reduction process. The electrochemical behaviors of the five resultant hybrid nanocomposites were investigated in H2O2 as well as in potassium ferricyanide (Fe(CN)6(3-/4-)) and displayed distinct electrocatalytic activity.

  11. Electro-deposition of Pd on carbon paper and Ni foam via surface limited redox-replacement reaction for oxygen reduction reaction

    CSIR Research Space (South Africa)

    Modibedi, RM

    2014-05-01

    Full Text Available Pd nanostructured catalysts were electrodeposited by surface-limited redox replacement reactions usingthe electrochemical atomic layer deposition technique. Carbon paper and Ni foam were used as substratesfor the electrodeposition of the metal...

  12. Intracellular surface-enhanced Raman scattering (SERS) with thermally stable gold nanoflowers grown from Pt and Pd seeds

    KAUST Repository

    Song, Hyon Min

    2013-01-01

    SERS provides great sensitivity at low concentrations of analytes. SERS combined with near infrared (NIR)-resonant gold nanomaterials are important candidates for theranostic agents due to their combined extinction properties and sensing abilities stemming from the deep penetration of laser light in the NIR region. Here, highly branched gold nanoflowers (GNFs) grown from Pd and Pt seeds are prepared and their SERS properties are studied. The growth was performed at 80°C without stirring, and this high temperature growth method is assumed to provide great shape stability of sharp tips in GNFs. We found that seed size must be large enough (>30 nm in diameter) to induce the growth of those SERS-active and thermally stable GNFs. We also found that the addition of silver nitrate (AgNO3) is important to induce sharp tip growth and shape stability. Incubation with Hela cells indicates that GNFs are taken up and reside in the cytoplasm. SERS was observed in those cells incubated with 1,10-phenanthroline (Phen)-loaded GNFs. This journal is © 2013 The Royal Society of Chemistry.

  13. Size-dependent effects in supported highly dispersed Fe2O3 catalysts, doped with Pt and Pd

    International Nuclear Information System (INIS)

    Cherkezova-Zheleva, Zara; Shopska, Maya; Mitov, Ivan; Kadinov, Georgi

    2010-01-01

    Series of Fe and Fe–Me (Me = Pt or Pd) catalyst supported on γ-Al 2 O 3 , TiO 2 (anatase) or diatomite were prepared by the incipient wetness impregnation method. The metal loading was 8 wt.% Fe and 0.7 wt.% noble metal. The preparation and pretreatment conditions of all studied samples were kept to be the same. X-ray diffraction, Moessbauer spectroscopy, X-ray photoelectron spectroscopy and temperature-programmed reduction are used for characterization of the supports and the samples at different steps during their treatment and catalytic tests. The catalytic activity of the samples was tested in the reaction of total benzene oxidation. The physicochemical and catalytic properties of the obtained materials are compared with respect of the different chemical composition, dispersion of used carriers and of the supported phases. Samples with the same composition prepared by mechanical mixing are studied as catalysts for comparison and for clearing up the presence of size-dependent effect, also.

  14. Fluid inclusion and oxygen-isotope evidence for low-temperature Au-Pt-Pd (± U) mineralization at Corronation Hill, NT

    International Nuclear Information System (INIS)

    Mernagh, T.

    1992-01-01

    The fluid inclusion and isotope data have been used to constrain the ore genesis models for the Au-Pt-Pd-U mineralization at Coronation Hill. The fluid inclusions demonstrate that the ore fluid was strongly saline with an unusually high CaCl 2 content, and that the mineralisation was probably formed from a boiling fluid at around 140 deg C. Furthermore, the fluids were highly oxidised and the replacement of earlier chlorite by hematite is common throughout the deposit. It is concluded that both U-rich and U-poor Au-Pt-Pd mineralisation were formed by descending, low-temperature, highly oxidised, very saline, meteoric fluids. The segregation of U was controlled by fluid-rock interaction in the feldspathic or carbonate rocks. Interaction with carbonaceous or chloritic rocks resulted in a reduction in fO 2 , and consequent precipitation of U, Au, Pt and Pd. The other two types of metal associations can be explained by further reaction of the mineralizing fluids. 3 figs

  15. Effect of flattened surface morphology of anodized aluminum oxide templates on the magnetic properties of nanoporous Co/Pt and Co/Pd thin multilayered films

    Science.gov (United States)

    Nguyen, T. N. Anh; Fedotova, J.; Kasiuk, J.; Bayev, V.; Kupreeva, O.; Lazarouk, S.; Manh, D. H.; Vu, D. L.; Chung, S.; Åkerman, J.; Altynov, V.; Maximenko, A.

    2018-01-01

    For the first time, nanoporous Al2O3 templates with smoothed surface relief characterized by flattened interpore areas were used in the fabrication of Co/Pd and Co/Pt multilayers (MLs) with strong perpendicular magnetic anisotropy (PMA). Alternating gradient magnetometry (AGM) revealed perfectly conserved PMA in the Co/Pd and Co/Pt porous MLs (antidot arrays) with a ratio of remanent magnetization (Mr) to saturation magnetization (MS) of about 0.99, anisotropy fields (Ha) of up to 2.6 kOe, and a small deviation angle of 8° between the easy magnetization axis and the normal to the film surface. The sufficient magnetic hardening of the porous MLs with enhanced coercive field HC of up to ∼1.9 kOe for Co/Pd and ∼1.5 kOe for Co/Pt MLs, as compared to the continuous reference samples (∼1.5-2 times), is associated with the pinning of the magnetic moments on the nanopore edges. Application of the Stoner-Wohlfarth model for fitting the experimental M/MS(H) curves yielded clear evidence of the predominantly coherent rotation mechanism of magnetization reversal in the porous films.

  16. Recent Advances on Electro-Oxidation of Ethanol on Pt- and Pd-Based Catalysts: From Reaction Mechanisms to Catalytic Materials

    Directory of Open Access Journals (Sweden)

    Ye Wang

    2015-09-01

    Full Text Available The ethanol oxidation reaction (EOR has drawn increasing interest in electrocatalysis and fuel cells by considering that ethanol as a biomass fuel has advantages of low toxicity, renewability, and a high theoretical energy density compared to methanol. Since EOR is a complex multiple-electron process involving various intermediates and products, the mechanistic investigation as well as the rational design of electrocatalysts are challenging yet essential for the desired complete oxidation to CO2. This mini review is aimed at presenting an overview of the advances in the study of reaction mechanisms and electrocatalytic materials for EOR over the past two decades with a focus on Pt- and Pd-based catalysts. We start with discussion on the mechanistic understanding of EOR on Pt and Pd surfaces using selected publications as examples. Consensuses from the mechanistic studies are that sufficient active surface sites to facilitate the cleavage of the C–C bond and the adsorption of water or its residue are critical for obtaining a higher electro-oxidation activity. We then show how this understanding has been applied to achieve improved performance on various Pt- and Pd-based catalysts through optimizing electronic and bifunctional effects, as well as by tuning their surface composition and structure. Finally we point out the remaining key problems in the development of anode electrocatalysts for EOR.

  17. Determination of melting mechanism of Pd{sub 24}Pt{sub 14} nanoalloy by multiple histogram method via molecular dynamics simulations

    Energy Technology Data Exchange (ETDEWEB)

    Oderji, Hassan Yousefi [School of Physics and Optical Electronics, Dalian University of Technology, Dalian, Liaoning 116024 (China); School of Chemistry, University College of Science, University of Tehran, Tehran 14155 (Iran, Islamic Republic of); Ding Hongbin, E-mail: hding@dlut.edu.cn [School of Physics and Optical Electronics, Dalian University of Technology, Dalian, Liaoning 116024 (China)

    2011-09-22

    Graphical abstract: Core and structure for truncated octahedral Pd24Pt14 nanoalloys, and the heat capacity changes with temperature. Display Omitted Highlights: {yields} Melting occurs at T = 747 K. {yields} Melting is corresponding to transitions from truncated-octahedral structure to icosahedral basin of structures. {yields} Postmelting occurs at temperatures between 900 and 1100 K. - Abstract: Melting mechanism for the Pd{sub 24}Pt{sub 14} nanoalloy has been determined by classical simulations in which quenching by the steepest descent method is coupled to the isothermal molecular dynamics and the nonergodicity of simulations is removed by the multiple histogram method. The Gupta many-body model is used for interatomic potentials. The melting characteristics are determined by the analysis of variations in the potential energy, the heat capacity, the vibrational density of states and the self time-space correlation functions with temperatures starting from 50 K up to 2200 K. The calculations indicate that the melting of Pd{sub 24}Pt{sub 14} nanoalloy occurs at T = 747 K following structural transitions from the truncated-octahedral to the icosahedral basin of structures. A postmelting phenomenon has also been observed at temperatures between 900 and 1100 K, which is related to the homogeneous melting. This improves our knowledge about the phase transition features in 38-atom nanoalloys.

  18. Study of the interface stability of the metal (Mo, Ni, Pd/HfO2/AlN/InGaAs MOS devices

    Directory of Open Access Journals (Sweden)

    Huy Binh Do

    2017-08-01

    Full Text Available The degeneration of the metal/HfO2 interfaces for Mo, Ni, and Pd gate metals was studied in this paper. An unstable PdOx interfacial layer formed at the Pd/HfO2 interface, inducing the oxygen segregation for the Pd/HfO2/InGaAs metal oxide capacitor (MOSCAP. The low dissociation energy for the Pd-O bond was the reason for oxygen segregation. The PdOx layer contains O2− and OH− ions which are mobile during thermal annealing and electrical stress test. The phenomenon was not observed for the (Mo, Ni/HfO2/InGaAs MOSCAPs. The results provide the guidance for choosing the proper metal electrode for the InGaAs based MOSFET.

  19. Structural behavior of Pd40Cu30Ni10P20 bulk metallic glass below and above the glass transition

    DEFF Research Database (Denmark)

    Mattern, N.; Hermann, H.; Roth, S.

    2003-01-01

    The thermal behavior of the structure of Pd40Cu30Ni10P20 bulk metallic glass has been investigated in situ through the glass transition by means of high-temperature x-ray synchrotron diffraction. The dependence of the x-ray structure factor S(q) of the Pd40Cu30Ni10P20 glass on temperature follows...... the Debye theory up to the glass transition with a Debye temperature theta=296 K. Above the glass transition temperature T-g, the temperature dependence of S(q) is altered, pointing to a continuous development of structural changes in the liquid with temperature. The atomic pair correlation functions g......(r) indicate changes in short-range-order parameters of the first and the second neighborhood with temperature. The temperature dependence of structural parameters is different in glass and in supercooled liquid, with a continuous behavior through the glass transition. The nearest-neighbor distance decreases...

  20. Heteronuclear transition metal diatomics - The bonding and electronic structure of ScNi, YNi, ScPd, and YPd

    Science.gov (United States)

    Faegri, Knut, Jr.; Bauschlicher, Charles W., Jr.

    1991-01-01

    High quality ab initio calculations show that ScNi, YNi, ScPd, and YPd all have 2Sigma(+) ground states in agreement with electron spin resonance experiments. For ScNi and YNi, this is expected based on the lowest atomic asymptote. For ScPd and YPd, the lowest atomic asymptote would give the order of stability 2Delta greater than 2Pi equal to about 2Sigma(+), but the calculations show that mixing in of the excited asymptotes preferentially lowers the 2Sigma(+) state. The calculations show that the quartet states are about 20-30 kcal/mol above the ground state, and therefore probably do not contribute significantly to the unexpected g(vertical) values found in experiment. Calculations of excited states for YPd reveal some strong transitions that should be amenable to spectroscopic studies.

  1. Development of PdM (M = Ni, Cu, Ag) electrocatalysts for oxygen reduction reaction in alkaline medium in the absence and presence of alcohol

    International Nuclear Information System (INIS)

    Isidoro, Roberta Alvarenga

    2015-01-01

    Pd/C, Pd Cu/C, Pd Ni/C and Pd Ag/C electrocatalysts were produced by microwave method to be used as cathode in alkaline fuel cell in the absence and presence of alcohol. This method showed to be effective for the materials production, the particles exhibited good dispersion in carbon support and it produced electrocatalysts with a particle size of about 3.5 nm, according to XRD and TEM analysis. In cyclic voltammetry is observed that Pd Cu/C and Pd Ni/C electrocatalysts has higher active area with higher amount of Cu and Ni, respectively. Rotating ring disk analysis in the electrocatalysts showed that the amount of peroxide produced was at most 4%. This data is similar to Koutecky-Levich analysis, once for both the ORR occurs via 4 electrons. Materials stability analysis showed that they kept or improve performance in ORR, comparing the data before and after 1000 voltammetric cycles. Tolerance tests in methanol and ethanol were performed in a half cell in all electrocatalysts compositions. In presence of methanol and ethanol the compositions 50:50, to all materials studied, showed less influence in the presence of alcohol in ORR linear scan. In alkaline fuel cell Pd Ag/C 70:30 showed better performance for ORR in presence of methanol and Pd Ni/C 70:30 showed better performance for ORR in ethanol presence. (author)

  2. Synthesis of the Tetracyclic Structure of Batrachotoxin Enabled by Bridgehead Radical Coupling and Pd/Ni-Promoted Ullmann Reaction.

    Science.gov (United States)

    Sakata, Komei; Wang, Yinghua; Urabe, Daisuke; Inoue, Masayuki

    2018-01-05

    The steroidal ABCD-ring system of the potent neurotoxin batrachotoxin was efficiently assembled in a convergent fashion. Bridgehead radical coupling between the simple AB-ring and D-ring fragments (3 and 4) formed the sterically congested linkage at the C9-oxygen-attached tetrasubstituted carbon. The C-ring was then cyclized by the Pd/Ni-promoted Ullmann reaction of the vinyl triflate and vinyl bromide of 19, giving rise to tetracyclic structure 1.

  3. Oxidation of CO and Methanol on Pd-Ni Catalysts Supported on Different Chemically-Treated Carbon Nanofibers

    OpenAIRE

    Juan Carlos Calderón; Miguel Rios Ráfales; María Jesús Nieto-Monge; Juan Ignacio Pardo; Rafael Moliner; María Jesús Lázaro

    2016-01-01

    In this work, palladium-nickel nanoparticles supported on carbon nanofibers were synthesized, with metal contents close to 25 wt % and Pd:Ni atomic ratios near to 1:2. These catalysts were previously studied in order to determine their activity toward the oxygen reduction reaction. Before the deposition of metals, the carbon nanofibers were chemically treated in order to generate oxygen and nitrogen groups on their surface. Transmission electron microscopy analysis (TEM) images revealed parti...

  4. Low content of Pt supported on Ni-MoC{sub x}/carbon black as a highly durable and active electrocatalyst for methanol oxidation, oxygen reduction and hydrogen evolution reactions in acidic condition

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yan; Zang, Jianbing; Jia, Shaopei; Tian, Pengfei; Han, Chan; Wang, Yanhui, E-mail: diamond_wangyanhui@163.com

    2017-08-01

    Highlights: • Ni-MoC{sub x}/C catalyst support was synthesized by a two-step method. • 10Pt/Ni-MoC{sub x}/C was an active and durable low Pt catalyst for MOR, ORR and HER. • The high stability of 10Pt/Ni-MoC{sub x}/C was ascribed to the anchoring effect of MoC{sub x}. • High activity of 10Pt/Ni-MoC{sub x}/C was due to a synergistic of Pt, Ni, MoO{sub x} and MoC{sub x}. - Abstract: Nickel and molybdenum carbide modified carbon black (Ni-MoC{sub x}/C) was synthesized by a two-step microwave-assisted deposition/carbonthermal reduction method and characterized by X-ray diffraction, transmission electron microscopy, energy dispersive spectroscopy and X-ray photoelectron spectroscopy. The as-prepared Ni-MoC{sub x}/C supported Pt (10 wt%) electrocatalyst (10Pt/Ni-MoC{sub x}/C) was synthesized through a microwave-assisted reduction method and 10Pt/Ni-MoC{sub x}/C exhibited high electrocatalytic activity for methanol oxidation, oxygen reduction and hydrogen evolution reactions. Results showed that 10Pt/Ni-MoC{sub x}/C electrocatalyst had better electrocatalytic activity and stability performance than 20 wt% Pt/C (20Pt/C) electrocatalyst. Among them, the electrochemical surface area of 10Pt/Ni-MoC{sub x}/C reached 68.4 m{sup 2} g{sup −1}, which was higher than that of 20Pt/C (63.2 m{sup 2} g{sup −1}). The enhanced stability and activity of 10Pt/Ni-MoC{sub x}/C electrocatalyst were attributed to: (1) an anchoring effect of Ni and MoC{sub x} formed during carbonthermal reduction process; (2) a synergistic effect among Pt, Ni, MoO{sub x} and MoC{sub x}. These findings indicated that 10Pt/Ni-MoC{sub x}/C was a promising electrocatalyst for direct methanol fuel cells.

  5. Reversible hydrogen storage in the Ni-rich pseudo-binary Mg{sub 6}Pd{sub 0.25}Ni{sub 0.75} intermetallic compound: Reaction pathway, thermodynamic and kinetic properties

    Energy Technology Data Exchange (ETDEWEB)

    Ponthieu, M. [Dpto. Fisica de Materiales, Facultad de Ciencias, Universidad Autonoma de Madrid, 28049 Madrid (Spain); ICMPE/CNRS-UPEC UMR 7182, 2-8 rue Henri Dunant, 94320 Thiais (France); Fernandez, J.F., E-mail: josefrancisco.fernandez@uam.es [Dpto. Fisica de Materiales, Facultad de Ciencias, Universidad Autonoma de Madrid, 28049 Madrid (Spain); Cuevas, F. [ICMPE/CNRS-UPEC UMR 7182, 2-8 rue Henri Dunant, 94320 Thiais (France); Ares, J.R.; Leardini, F.; Bodega, J.; Sanchez, C. [Dpto. Fisica de Materiales, Facultad de Ciencias, Universidad Autonoma de Madrid, 28049 Madrid (Spain)

    2013-01-25

    Highlights: Black-Right-Pointing-Pointer Mg{sub 6.2}Pd{sub 0.25}Ni{sub 0.65} reversibly absorbs 5.6 wt.% H in a two plateau pressure PCI. Black-Right-Pointing-Pointer The ternary phase depletes in Mg and Ni at low hydrogen pressure to form Mg{sub 2}Ni. Black-Right-Pointing-Pointer Reaction pathway of hydrogenation has been determined. Black-Right-Pointing-Pointer Enthalpy of the high pressure plateau is less negative than the one of pure Mg. Black-Right-Pointing-Pointer Low activation energy for desorption has been found for highly hydrided material. - Abstract: To improve the hydrogen storage properties of Mg{sub 6}Pd and to reduce its cost, Pd has been partly substituted by Ni at the solubility limit of the Mg{sub 6}(Pd,Ni) {rho}-phase. The attained composition is Mg{sub 6.2}Pd{sub 0.25}Ni{sub 0.65} as determined by Energy Dispersive X-Ray (EDX) and X-Ray Diffraction (XRD). Hydrogenation of this compound has been investigated by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM-EDX), Pressure-Composition-Isotherms (PCI) and thermal desorption analysis. On absorption, it decomposes in two steps as evidenced by two distinct plateau pressures. At low pressure, a partial segregation of Mg and Ni out of the pseudo-binary Mg{sub 6.2}Pd{sub 0.25}Ni{sub 0.65} {rho}-phase occurs leading to the formation of MgH{sub 2}, Mg{sub 2}Ni and Mg{sub 6}Pd{sub 0.7}Ni{sub 0.3} phases. At high pressure, the Mg{sub 6}Pd{sub 0.7}Ni{sub 0.3} phase disproportionates into MgH{sub 2}, Mg{sub 2}NiH{sub 4}, MgPd and Mg{sub 5}Pd{sub 2} phases. The hydrogenation reaction is reversible providing a hydrogen capacity of 5.6 wt.% H. The reaction enthalpy of the high pressure plateau is less negative than for pure Mg. Furthermore, the activation energy for H-desorption exhibits a dramatic decrease for hydrogen contents above 4 wt.% H, i.e. after the alloy disproportionation.

  6. Catalytic reforming of glycerol in supercritical water over bimetallic Pt-Ni catalyst

    NARCIS (Netherlands)

    Chakinala, A.G.; van Swaaij, Willibrordus Petrus Maria; Kersten, Sascha R.A.; de Vlieger, Dennis; Seshan, Kulathuiyer; Brilman, Derk Willem Frederik

    2013-01-01

    Catalytic reforming of pure glycerol for the production of hydrogen at low temperature and short residence times in supercritical water was investigated using a bimetallic Pt–Ni catalyst supported on alumina. Initial tests were carried out to study the reforming activity of bimetallic Pt–Ni

  7. Microstructure and magnetic properties of FePt film with combined MoC/(Mg–X)O (X=Cu, Ni, Co) intermediate layers

    International Nuclear Information System (INIS)

    Tsai, Jai-Lin; Tzeng, Jie-Lin; Hu, Keng-Chun; Li, Hsu-Kang; Pan, Zu-Yu; Chang, Yuan-Shuo; Liao, Chang-Chun

    2017-01-01

    The magnetic properties and microstructure of FePt films grown on MoC layer and MoC/(Mg–X)O (X=Cu, Ni, Co) combined intermediate layers were studied. The (Mg–X)O (X=Cu, Ni, Co) layer with thickness of 5 nm was deposited on CrRu seed layer at 395 °C. The CrRu (200) texture was enhanced which may due to well grains growth in specific orientation and small lattice mismatch with (Mg–X)O (X=Cu, Ni, Co). Finally, the FePt/MoC layers were deposited on (Mg–X)O layer at 425 °C. Using MoC/MgCuO combined intermediate layers, the rocking width of FePt (001) and CrRu (200) diffraction peak were changed from 7.1° to 6.1°, and 5.7° to 3.8°, respectively. For MoC/MgCoO dual intermediate layers, the rocking width of FePt (001) and CrRu (200) diffraction peak were 6.7° and 4.1°. The FePt/MoC/MgCoO film illustrates perpendicular magnetic anisotropy with out-of plane coercivity of 9.3 kOe which is higher than FePt film deposited on MoC layer (8.5 kOe) and the in-plane loops is linear. From microstructure, the FePt grains were more separated on MoC/(Mg–X)O (X=Cu, Ni, Co) combined intermediate layers. - Highlights: • The MgCoO intermediate layer was resisted the Cr diffusion. • The MgCoO capped layer promote the CrRu(200) texture. • The FePt film shows high perpendicular magnetization on MoC/MgCoO layer.

  8. Dispersion of Pt, Pd and Rh produced by catalytic converters into the roadside and urban environment. Element speciation study; Dispersion dans l'environnement routier et urbain de Pt, Pd, et Rh emis par les pots d'echappement catalytiques. Etude de la speciation des elements

    Energy Technology Data Exchange (ETDEWEB)

    Amosse, J.; Delbos, V. [Centre National de la Recherche Scientifique (CNRS), Lab. de Geodynamique des Chaines Alpines, LGCA, UMR 5025, 38 - Grenoble (France)

    2002-09-01

    This study highlights the dispersion into the French urban environment of platinum group elements (PGEs) used in catalytic converters. Differences were observed between Pt and Rh on the one hand, and Pd on the other one. One experiment, consisting in passing the corrosive gas emissions from engines over the metals heated to 1000 deg. C, showed that Pd was severely corroded by nitrogen oxides. It was concluded that Pd is emitted in nitrate form. Hydrolysis of this nitrate form leads to the formation of soluble species. In situ pH and E{sub h} measurements in the soils concerned confirm this theory when the results are compared with the Pd species predominance diagram. (authors)

  9. Gram-Scale Synthesis of Highly Active and Durable Octahedral PtNi Nanoparticle Catalysts for Proton Exchange Membrane Fuel Cell

    DEFF Research Database (Denmark)

    Choi, Juhyuk; Jang, Jue-Hyuk; Roh, Chi-Woo

    2018-01-01

    Proton exchange membrane fuel cells (PEMFC) are regarded as a promising renewable energy source for a future hydrogen energy society. However, highly active and durable catalysts are required for the PEMFCs because of their intrinsic high overpotential at the cathode and operation under the acidic...... condition for oxygen reduction reaction (ORR). Since the discovery of the exceptionally high surface activity of Pt3Ni(111), the octahedral PtNi nanoparticles have been synthesized and tested. Nonetheless, their milligram-scale synthesis method and poor durability make them unsuitable...

  10. Applications Ni59Nb40Pt(1-x) Xx (X= Sn,Sby and Ru) amorphous alloy as anodes for direct methanol (DMFC) fuel cells

    International Nuclear Information System (INIS)

    Rodriguez Pierna, A

    2005-01-01

    The search of new anode materials of amorphous nature for methanol fuel cells is one of the aims of this work.The main problem that fuel cells present is related to the catalytic material and its distribution in a suitable matrix.Amorphous alloys are particularly attractive materials as catalyst supports because of their high conductivity, high corrosion resistance in sulphuric acid, as well as the possibility of a good distribution of the electrocatalytic particles, mainly platinum and platinum-tin, on a conducting matrix.The electrooxidation of methanol, in percloric acid medium, has been used as probe to evaluate the performance of metallic amorphous electrodes, with compositions Ni 5 9Nb 4 0Pt 1 , Ni 5 9Nb 4 0Pt 0 .6Sn0.4, Ni 5 9Nb 4 0Pt 0 .6Sb 0 .4 and Ni 5 9Nb 4 0Pt 0 .6Ru 0 .4.The electrocatalytic activity of the alloyed ribbons of compositions (x = 0.6, 1% at. in platinum) is improved considerably, so much for the change in their composition, as for the roughness degree that the catalytic surfaces present. The increase of the tolerance to adsorbed species, and better resistance to the poisoning of their catalytic centers, can be observed by means of voltammetric experiments at different activation times with HF 48%. The electrooxidation of methanol in the amorphous alloy of composition Ni 5 9Nb 4 0Pt 1 , is influenced by the nature of the used electrolyte, presenting smaller values of current density in solutions 1M H 2 SO 4 than in 1M of HClO 4 .This behavior is not observed in the alloy Ni 5 9Nb 4 0Pt 0 .6Sn 0 .4, Ni 5 9Nb 4 0Pt 0 .6Sb 0 .4 and Ni 5 9Nb 4 0Pt 0 .6Ru 0 .4which does not present a poisoning of the catalytic centers depending on the used electrolyte.Adding tin to the alloys showed the existence of a synergetic effect in the methanol electrooxidation process, attaining to a descent of 20 mV vs Ag/AgCl in the onset potential, and about 200 mV in the maximun peak potential

  11. Pt surface segregation in bimetallic Pt 3M alloys: A density functional theory study

    Science.gov (United States)

    Ma, Yuguang; Balbuena, Perla B.

    A simplified 5-layer slab model is used to study Pt segregation at Pt 3M(1 1 1) surfaces (M = Ag, Au, Co, Cr, Cu, Fe, Ir, Mn, Mo, Ni, Pd, Re, Rh, Ru, Ti, V). The calculated segregation energies are generally in good agreement with the experimental results. However, for Pt 3Ti(1 1 1) and Pt 3Mn(1 1 1), the model is unable to give the correct prediction because the experimental subsurface compositions are very different from those of the model. Pt segregation is found to be correlated with the subsurface atomic structure, the size of metal atoms and the surface energy. Interestingly, the calculations show that the displacement of M atoms at the topmost Pt 3M layer can be used to predict the surface segregation trend. The local geometries for the segregation and non-segregation structures are carefully compared and the surface geometric effect on the oxygen reduction reaction (ORR) activity is discussed. In particular, it is determined that the enhanced ORR activity for the Pt-skin surfaces of Pt 3Ni(1 1 1) and Pt 3Co(1 1 1) alloys are not caused by geometric effects.

  12. A new class of amorphous cathode active material LixMyPOz (M = Ni, Cu, Co, Mn, Au, Ag, Pd)

    Science.gov (United States)

    Sabi, Yuichi; Sato, Susumu; Hayashi, Saori; Furuya, Tatsuya; Kusanagi, Susumu

    2014-07-01

    A new class of amorphous cathode active material LixMyPOz (LiMPO) is proposed. The materials are sputter deposited to thin film form by Li3PO4 together with metal or metal oxide targets. Among several materials tested as thin-film battery, working material found are M = Ni, Cu, Co, Mn, Au, Ag, Pd. The property is intensively studied for LixCuyPOz (LiCuPO) and LixNiyPOz (LiNiPO). Those materials shows wide composition margin such as composition y between 1 and 3, and high capacity for LiNiPO with maximum value of 330 mAh g-1. The capability to charge and discharge at high rate is shown up to 30 C. This preliminary report reveals its high potentiality for further optimization.

  13. Synthesis and characterization of Pd@M(x)Cu(1-x) (M = Au, Pd, and Pt) nanocages with porous walls and a yolk-shell structure through galvanic replacement reactions.

    Science.gov (United States)

    Xie, Shuifen; Jin, Mingshang; Tao, Jing; Wang, Yucai; Xie, Zhaoxiong; Zhu, Yimei; Xia, Younan

    2012-11-19

    This paper describes the synthesis of Pd@M(x)Cu(1-x) (M = Au, Pd, and Pt) nanocages with a yolk-shell structure through galvanic replacement reactions that involve Pd@Cu core-shell nanocubes as sacrificial templates and ethylene glycol as the solvent. Compared with the most commonly used templates based on Ag, Cu offers a much lower reduction potential (0.34 versus 0.80 V), making the galvanic reaction more easily to conduct, even at room temperature. Our structural and compositional characterizations indicated that the products were hollow inside, and each one of them contained porous M-Cu alloy walls and a Pd cube in the interior. For the Pd@Au(x)Cu(1-x) yolk-shell nanocages, they displayed broad extinction peaks extending from the visible to the near-IR region. Our mechanistic study revealed that the dissolution of the Cu shell preferred to start from the slightly truncated corners and then progressed toward the interior, because the Cu {100} side faces were protected by a surface capping layer of hexadecylamine. This galvanic approach can also be extended to generating other hollow metal nanostructures by using different combinations of Cu nanostructures and salt precursors. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Activity of platinum/carbon and palladium/carbon catalysts promoted by Ni2 P in direct ethanol fuel cells.

    Science.gov (United States)

    Li, Guoqiang; Feng, Ligang; Chang, Jinfa; Wickman, Björn; Grönbeck, Henrik; Liu, Changpeng; Xing, Wei

    2014-12-01

    Ethanol is an alternative fuel for direct alcohol fuel cells, in which the electrode materials are commonly based on Pt or Pd. Owing to the excellent promotion effect of Ni2 P that was found in methanol oxidation, we extended the catalyst system of Pt or Pd modified by Ni2 P in direct ethanol fuel cells. The Ni2 P-promoted catalysts were compared to commercial catalysts as well as to reference catalysts promoted with only Ni or only P. Among the studied catalysts, Pt/C and Pd/C modified by Ni2 P (30 wt %) showed both the highest activity and stability. Upon integration into the anode of a homemade direct ethanol fuel cell, the Pt-Ni2 P/C-30 % catalyst showed a maximum power density of 21 mW cm(-2) , which is approximately two times higher than that of a commercial Pt/C catalyst. The Pd-Ni2 P/C-30 % catalyst exhibited a maximum power density of 90 mW cm(-2) . This is approximately 1.5 times higher than that of a commercial Pd/C catalyst. The discharge stability on both two catalysts was also greatly improved over a 12 h discharge operation. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. General synthesis of noble metal (Au, Ag, Pd, Pt) nanocrystal modified MoS2 nanosheets and the enhanced catalytic activity of Pd-MoS2 for methanol oxidation

    Science.gov (United States)

    Yuwen, Lihui; Xu, Fei; Xue, Bing; Luo, Zhimin; Zhang, Qi; Bao, Biqing; Su, Shao; Weng, Lixing; Huang, Wei; Wang, Lianhui

    2014-05-01

    A general and facile method for water-dispersed noble metal (Au, Ag, Pd, Pt) nanocrystal modified MoS2 nanosheets (NM-MoS2 NSs) has been developed. By using sodium carboxymethyl cellulose as a stabilizer, well-dispersed NM-MoS2 NSs with homogeneously deposited noble metal nanocrystals (NM NCs) can be synthesized in aqueous solutions. Due to the transition from the semiconducting 2H phase to the metallic 1T phase, the chemically exfoliated MoS2 (ce-MoS2) NSs have improved electrochemical activity. The partially metallic nature of the ce-MoS2 NSs and the catalytic activity of the NM NCs synergistically make NM-MoS2 NSs a potential electrochemical catalyst. For the first time, Pd-MoS2 NSs were used as an electrocatalyst for methanol oxidation in alkaline media. The results showed that Pd-MoS2 NSs have enhanced catalytic activity with 2.8-fold anodic peak current mass density compared to a commercial Pd/C catalyst, suggesting potential for application in direct methanol fuel cells (DMFCs).A general and facile method for water-dispersed noble metal (Au, Ag, Pd, Pt) nanocrystal modified MoS2 nanosheets (NM-MoS2 NSs) has been developed. By using sodium carboxymethyl cellulose as a stabilizer, well-dispersed NM-MoS2 NSs with homogeneously deposited noble metal nanocrystals (NM NCs) can be synthesized in aqueous solutions. Due to the transition from the semiconducting 2H phase to the metallic 1T phase, the chemically exfoliated MoS2 (ce-MoS2) NSs have improved electrochemical activity. The partially metallic nature of the ce-MoS2 NSs and the catalytic activity of the NM NCs synergistically make NM-MoS2 NSs a potential electrochemical catalyst. For the first time, Pd-MoS2 NSs were used as an electrocatalyst for methanol oxidation in alkaline media. The results showed that Pd-MoS2 NSs have enhanced catalytic activity with 2.8-fold anodic peak current mass density compared to a commercial Pd/C catalyst, suggesting potential for application in direct methanol fuel cells (DMFCs

  16. Effect of an in-plane ligand on the electronic structures of bromo-bridged nano-wire Ni-Pd mixed-metal complexes, [Ni(1-x)Pd(x)(bn)2Br]Br2 (bn = 2S,3S-diaminobutane).

    Science.gov (United States)

    Sasaki, Mari; Wu, Hashen; Kawakami, Daisuke; Takaishi, Shinya; Kajiwara, Takashi; Miyasaka, Hitoshi; Breedlove, Brian K; Yamashita, Masahiro; Kishida, Hideo; Matsuzaki, Hiroyuki; Okamoto, Hiroshi; Tanaka, Hisaaki; Kuroda, Shinichi

    2009-08-03

    Single crystals of quasi-one-dimensional bromo-bridged Ni-Pd mixed-metal complexes with 2S,3S-diaminobutane (bn) as an in-plane ligand, [Ni(1-x)Pd(x)(bn)(2)Br]Br(2), were obtained by using an electrochemical oxidation method involving mixed methanol/2-propanol (1:1) solutions containing different ratios of [Ni(II)(bn)(2)]Br(2) and [Pd(II)(bn)(2)]Br(2). To investigate the competition between the electron-correlation of the Ni(III) states, or Mott-Hubbard states (MH), and the electron-phonon interaction of the Pd(II)-Pd(IV) mixed valence states, or charge-density-wave states (CDW), in the Ni-Pd mixed-metal compounds, X-ray structure analyses, X-ray oscillation photograph, and Raman, IR, ESR, and single-crystal reflectance spectra were analyzed. In addition, the local electronic structures of Ni-Pd mixed-metal single crystals were directly investigated by using scanning tunneling microscopy (STM) at room temperature and ambient pressure. The oxidation states of [Ni(1-x)Pd(x)(bn)(2)Br]Br(2) changed from a M(II)-M(IV) mixed valence state to a M(III) MH state at a critical mixing ratio (x(c)) of approximately 0.8, which is lower than that of [Ni(1-x)Pd(x)(chxn)(2)Br]Br(2) (chxn = 1R,2R-diaminocyclohexane) (x(c) approximately 0.9) reported previously. The lower value of x(c) for [Ni(1-x)Pd(x)(bn)(2)Br]Br(2) can be explained by the difference in their CDW dimensionalities because the three-dimensional CDW ordering in [Pd(bn)(2)Br]Br(2) observed by using X-ray diffuse scattering stabilizes the Pd(II)-Pd(IV) mixed valence state more than two-dimensional CDW ordering in [Pd(chxn)(2)Br]Br(2) does, which has been reported previously.

  17. Perpendicular magnetic tunnel junctions with a synthetic storage or reference layer: A new route towards Pt- and Pd-free junctions

    Science.gov (United States)

    Cuchet, Léa; Rodmacq, Bernard; Auffret, Stéphane; Sousa, Ricardo C.; Prejbeanu, Ioan L.; Dieny, Bernard

    2016-02-01

    We report here the development of Pt and Pd-free perpendicular magnetic tunnel junctions (p-MTJ) for STT-MRAM applications. We start by studying a p-MTJ consisting of a bottom synthetic Co/Pt reference layer and a synthetic FeCoB/Ru/FeCoB storage layer covered with an MgO layer. We first investigate the evolution of RKKY coupling with Ru spacer thickness in such a storage layer. The coupling becomes antiferromagnetic above 0.5 nm and its strength decreases monotonously with increasing Ru thickness. This contrasts with the behavior of Co-based systems for which a maximum in interlayer coupling is generally observed around 0.8 nm. A thin Ta insertion below the Ru spacer considerably decreases the coupling energy, without basically changing its variation with Ru thickness. After optimization of the non-magnetic and magnetic layer thicknesses, it appears that such a FeCoB/Ru/FeCoB synthetic storage layer sandwiched between MgO barriers can be made stable enough to actually be used as hard reference layer in single or double magnetic tunnel junctions, the storage layer being now a single soft FeCoB layer. Finally, we realize Pt- or Pd-free robust perpendicular magnetic tunnel junctions, still keeping the advantage of a synthetic reference layer in terms of reduction of stray fields at small pillar sizes.

  18. Pd-Pt alloys nanowires as support-less electrocatalyst with high synergistic enhancement in efficiency for methanol oxidation in acidic medium.

    Science.gov (United States)

    Rana, Moumita; Patil, Pramod K; Chhetri, Manjeet; Dileep, K; Datta, Ranjan; Gautam, Ujjal K

    2016-02-01

    In a facile approach, Pd73Pt27 alloy nanowires (NWs) with large aspect ratios were synthesized in high yield by using sacrificial templates. Unlike majority of processes, our synthesis was carried out in aqueous solution with no intermittent separating stages for the products, while maintaining the NW morphology up to ∼30% of Pt. Upon evaporation of their dispersion, the NWs transform into a stable porous membrane due to self-entanglement and can be directly lifted and employed for electrocatalytic applications without external catalyst supports. We show that the NW membranes exhibit efficient electrocatalytic performance for methanol oxidation reaction (MOR) with 10 times higher mass activity and 4.4 times higher specific activity in acidic media as compared to commercial Pt catalysts. The membrane electrocatalysts is robust and exhibited very good stability with retention of ∼70% mass-activity after 4000 potential cycles. Since Pd was found to be inert towards MOR in acidic medium, our investigation provides a direct estimate of synergistic enhancement of efficiency. Over 10 times increment of mass activity appears to be significantly higher than previous investigations in various other reaction media. Copyright © 2015 Elsevier Inc. All rights reserved.

  19. C-Ni-Pd and CNT-Ni-Pd film's molecular and crystalline structure investigations by FTIR spectroscopy and XRD diffraction

    Science.gov (United States)

    Stepińska, Izabela; Czerwosz, ElŻbieta; Diduszko, Ryszard; Kozłowski, Mirosław; Wronka, Halina

    2017-08-01

    In this work molecular and crystalline structure of new type of nanocomposite films were investigated. These films compose of CNT decorated with palladium nanograins. They were prepared on a base of C-Ni films modified in CVD process. C-Ni nanocomposite films were obtained by PVD process and their modification by CVD leads to a growth of CNT film. CNTs-Ni or C-Ni films were treated with additional PVD process with palladium. Nickel and palladium acetate and fulleren C60 are precursors of films in PVD process. FTIR spectroscopy was used to studied the molecular structure of film in every stage of preparation . The crystalline structure of these films was studied by X-ray diffraction. SEM (scanning electron microscopy) was applied to investigate film's surface topography.

  20. Superior effect of Ni-substitution on the hydrogenation kinetics of Mg{sub 6}Pd{sub 1−x}TM{sub x} (TM = Ag, Cu, Ni) pseudo-binary compounds

    Energy Technology Data Exchange (ETDEWEB)

    Ponthieu, M. [MIRE-Group, Laboratorio de Física de Materiales de Interés Energético, Dpto Física de Materiales, Facultad de Ciencias, Universidad Autónoma de Madrid, 28049 Madrid (Spain); ICMPE/CNRS-UPEC, UMR 7182, 2-8 rue Henri Dunant, 94320 Thiais (France); Fernández, J.F., E-mail: josefrancisco.fernandez@uam.es [MIRE-Group, Laboratorio de Física de Materiales de Interés Energético, Dpto Física de Materiales, Facultad de Ciencias, Universidad Autónoma de Madrid, 28049 Madrid (Spain); Cuevas, F. [ICMPE/CNRS-UPEC, UMR 7182, 2-8 rue Henri Dunant, 94320 Thiais (France); Laversenne, L. [Institut Néel, CNRS, Grenoble (France); Bodega, J.; Ares, J.R.; Sánchez, C. [MIRE-Group, Laboratorio de Física de Materiales de Interés Energético, Dpto Física de Materiales, Facultad de Ciencias, Universidad Autónoma de Madrid, 28049 Madrid (Spain)

    2015-10-05

    Highlights: • Kinetics of (de)hydrogenation of Mg{sub 6}(Pd,TM) TM = Ag, Cu and Ni compared. • Faster hydrogenation kinetics for the Ni compound. • Faster H-desorption for the Ni compound due to MgH{sub 2}/Mg{sub 2}NiH{sub 4} synergy. - Abstract: In this investigation, the H-sorption kinetics of Mg{sub 6}Pd and Mg{sub 6}Pd{sub 1−x}TM{sub x} (TM = Ag, Cu, Ni) pseudo-binary compounds at the TM solubility limit have been studied by isothermal hydrogen absorption, thermal desorption spectroscopy and in situ neutron diffraction. Among all studied compounds, the fastest absorption kinetics takes place for the Ni-substituted one. The fit of the absorption curves to established model equations for solid–gas reaction shows that hydrogenation is controlled by diffusion. As for desorption, the peak temperature for the Ni-substituted compound is 90 K below that of MgH{sub 2}/Mg system and is characterised by a low activation energy of 68 kJ/molH{sub 2}. To better understand these results, neutron diffraction experiments during in situ thermal desorption of deuterated Mg{sub 6}Pd and Mg{sub 6}Pd{sub 0.25}Ni{sub 0.75} compounds were carried out. These experiments demonstrate a synergetic effect between MgH{sub 2} and Mg{sub 2}NiH{sub 4} hydrides as responsible for the remarkable kinetics of the Ni-containing compound.

  1. Isolation and Structural Characterization of a Mackay 55-Metal-Atom Two-Shell Icosahedron of Pseudo-Ih Symmetry, Pd55L12(μ3-CO)20 (L = PR3, R = Isopropyl): Comparative Analysis with Interior Two-Shell Icosahedral Geometries in Capped Three-Shell Pd145, Pt-Centered Four-Shell Pd-Pt M165, and Four-Shell Au133 Nanoclusters.

    Science.gov (United States)

    Erickson, Jeremiah D; Mednikov, Evgueni G; Ivanov, Sergei A; Dahl, Lawrence F

    2016-02-10

    We present the first successful isolation and crystallographic characterization of a Mackay 55-metal-atom two-shell icosahedron, Pd55L12(μ3-CO)20 (L = PPr(i)3) (1). Its two-shell icosahedron of pseudo-Ih symmetry (without isopropyl substituents) enables a structural/bonding comparison with interior 55-metal-atom two-shell icosahedral geometries observed within the multi-shell capped 145-metal-atom three-shell Pd145(CO)72(PEt3)30 and 165-metal-atom four-shell Pt-centered (μ12-Pt)Pd164-xPtx(CO)72(PPh3)20 (x ≈ 7) nanoclusters, and within the recently reported four-shell Au133(SC6H4-p-Bu(t))52 nanocluster. DFT calculations carried out on a Pd55(CO)20(PH3)12 model analogue, with triisopropyl phosphine substituents replaced by H atoms, revealed a positive +0.84 e charge for the entire Pd55 core, with a highly positive second-shell Pd42 surface of +1.93 e.

  2. Ground-state properties of ordered, partially ordered, and random Cu-Au and Ni-Pt alloys

    DEFF Research Database (Denmark)

    Ruban, Andrei; Abrikosov, I. A.; Skriver, Hans Lomholt

    1995-01-01

    We have studied the ground-state properties of ordered, partially ordered, and random Cu-Au and Ni-Pt alloys at the stoichiometric 1/4, 1/2, and 3/4 compositions in the framework of the multisublattice single-site (SS) coherent potential approximation (CPA). Charge-transfer effects in the random ...... for the ordered alloys are in good agreement with experimental data. For all the alloys the calculated ordering energy and the equilibrium lattices parameters are found to be almost exact quadratic functions of the long-range-order parameter....... and the partially ordered alloys are included in the screened impurity model. The prefactor in the Madelung energy is determined by the requirement that the total energy obtained in direct SS CPA calculations should equal the total energy given by the Connolly-Williams expansion based on Green’s function...

  3. The memory effect of magnetoelectric coupling in FeGaB/NiTi/PMN-PT multiferroic heterostructure

    Science.gov (United States)

    Zhou, Ziyao; Zhao, Shishun; Gao, Yuan; Wang, Xinjun; Nan, Tianxiang; Sun, Nian X.; Yang, Xi; Liu, Ming

    2016-01-01

    Magnetoelectric coupling effect has provided a power efficient approach in controlling the magnetic properties of ferromagnetic materials. However, one remaining issue of ferromagnetic/ferroelectric magnetoelectric bilayer composite is that the induced effective anisotropy disappears with the removal of the electric field. The introducing of the shape memory alloys may prevent such problem by taking the advantage of its shape memory effect. Additionally, the shape memory alloy can also “store” the magnetoelectric coupling before heat release, which introduces more functionality to the system. In this paper, we study a FeGaB/NiTi/PMN-PT multiferroic heterostructure, which can be operating in different states with electric field and temperature manipulation. Such phenomenon is promising for tunable multiferroic devices with multi-functionalities. PMID:26847469

  4. The effect of external magnetic field on mark size in heat-assisted probe recording on CoNi/Pt multilayers

    NARCIS (Netherlands)

    Zhang, Li; Bain, James A.; Zhu, Jian-Gang; Abelmann, Leon; Onoue, T.

    A method of heat-assisted magnetic recording potentially suitable for probe-based storage systems is characterized. In this work, field-emission current from a scanning tunneling microscope tip isused as the heating source. Pulse voltages of 2-7 V were applied to a CoNi/Pt multilayered film. During

  5. The role of MFM signal in mark size measurement in probe-based magnetic recording on CoNi/Pt multilayers

    NARCIS (Netherlands)

    Zhang, Li; Bain, James A.; Zhu, Jian-Gang; Abelmann, Leon; Onoue, T.

    2007-01-01

    A method of heat-assisted magnetic recording (HAMR) potentially suitable for probe-based storage systems is characterized. Magnetic marks were formed by a scanning tunneling microscopy (STM)-based thermal magnetic mechanism on a perpendicular CoNi/Pt multilayered film. Magnetic force microscopy

  6. Characterization of electroless Au, Pt and Pd contacts on CdTe and ZnTe by RBS and SIMS techniques

    International Nuclear Information System (INIS)

    Roumie, M.; Hageali, M.; Zahraman, K.; Nsouli, B.; Younes, G.

    2004-01-01

    Rutherford backscattering spectrometry (RBS) was applied to characterize Au, Pt and Pd contacts on II-VI semiconductor materials, CdTe and ZnTe, used as nuclear detectors. Electroless thin film depositions were prepared by changing the concentration of the reaction solution. Contrary to the deposition reaction time, it was observed that the amount of solution dilution degree had a considerable effect on increasing the thickness of the metal layer. Furthermore, PICTS electrical measurements confirmed the depth profile analysis performed by RBS and SIMS

  7. Design of bimetal catalysts Pt-Ni/CeO2-1D for generation of H2 by the reforming reaction of methanol

    International Nuclear Information System (INIS)

    Sarmiento F, I.

    2016-01-01

    CeO 2 nano rods were synthesized by hydrothermal method and were used as support for preparing catalysts bimetallic Pt Ni / CeO 2 -1D. The catalysts were prepared by classical impregnation by the conventional wet method. The prepared catalysts are Pt (0.5 %) - Ni (5 %) / CeO 2 and Pt (0.5 %) - Ni (15 %) / CeO 2 , which were characterized by different physico-chemical techniques: Bet, Sem, TPR and XRD, that were evaluated in the Auto thermal Steam reforming of Methanol for H 2 production. The Bet surface area results, show that the surface area of the catalysts decreases as the nominal load of Ni in the catalyst, increases. Sem shows, that the catalyst support (CeO 2 -1D) and the bimetallic catalysts are conformed by nano rods. By XRD were identified the crystalline phases present, in the catalytic material: cerianite distinctive phase of cerium oxide and metallic Ni; however it was not possible to observe diffraction peaks of Platinum using this technique. The temperature-programmed reduction (TPR) analysis allowed to obtain the reduction profiles, of the different species present on the catalysts. The catalytic activity tests carried out, showed that the catalysts total 100% methanol conversion is achieved at 300 degrees Celsius, making them excellent, to be used in reactions at low temperature conditions. Selectivity towards H 2 , is very similar in both catalysts, and it reaches a 50% yield per mole of methanol fed stoichiometrically. (Author)

  8. H electro-insertion into Pd/Pt(1 1 1) nanofilms: an original method for isotherm measurement coupled to in situ surface X-ray diffraction structural study

    International Nuclear Information System (INIS)

    Soldo-Olivier, Y.; Sibert, E.; Previdello, B.; Lafouresse, M.C.; Maillard, F.; De Santis, M.

    2013-01-01

    In order to get a thorough comprehension of the mechanisms governing hydrogen insertion into nanometric metallic films, we have studied ultra-thin Pd/Pt(1 1 1) layers. In this paper we propose an original method allowing the measurement of hydrogen insertion electrochemical isotherms. The use of a hanging meniscus rotating disc electrode and a new calculation approach permit to remove the contributions to the insertion charge of both hydrogen evolution and hydrogen oxidation reactions. Indeed, compared to hydrogen insertion such terms become non-negligible in the case of nanometric deposits, due to their large surface/bulk atom ratio. We have measured hydrogen insertion isotherms for Pd/Pt(1 1 1) films from 14 ML down to 4 ML. Independently from the film thickness, the maximum hydrogen insertion rate (H/Pd) max is smaller than that of bulk Pd. The so-called two-phase region is still present, but contrarily to bulk Pd it is characterized by a slope. Both hydrogen solubility and the two-phase domain width diminish with the decrease of the film thickness. In the present work the behaviour of hydrogen electrochemical insertion isotherms is interpreted in the light of the Pd nanofilms structure obtained with in situ surface X-ray diffraction. The lattice constraints induced by the substrate result in a lower insertion rate in the Pd deposit close to the Pt–Pd interface. Only the outermost region of the film is relaxed and behaves like bulk Pd. This description quantitatively accounts for the experimental behaviour of (H/Pd) max as a function of the film thickness. The obtained Pd/Pt(1 1 1) films structure also corresponds to the presence of non-equivalent hydrogen insertion sites, surely contributing to the slope observed in the two-phase domain

  9. Elastic properties of Pd40Cu30Ni10P20 bulk glass in supercooled liquid region

    DEFF Research Database (Denmark)

    Nishiyama, N.; Inoue, A.; Jiang, Jianzhong

    2001-01-01

    In situ ultrasonic measurements for the Pd40Cu30Ni10P20 bulk glass in three states: Glassy solid, supercooled liquid, and crystalline, have been performed. It is found that velocities of both longitudinal and transverse waves and elastic moduli (shear modulus, bulk modulus, Young's modulus......, and Lame parameter), together with Debye temperature, gradually decrease with increasing temperature through the glass transition temperature as the Poisson's ratio increases. The behavior of the velocity of transverse wave vs. temperature in the supercooled liquid region could be explained by viscosity...

  10. Role of Ta-spacer layer on tuning the tilt angle magnetic anisotropy of L1{sub 1}-CoPt/Ta/NiFe exchange springs

    Energy Technology Data Exchange (ETDEWEB)

    Saravanan, P., E-mail: psdrdo@gmail.com [Defence Metallurgical Research Laboratory, Hyderabad 500058 (India); Talapatra, A.; Mohanty, J. [Department of Physics, Indian Institute of Technology Hyderabad, Hyderabad 502285 (India); Hsu, Jen-Hwa, E-mail: jhhsu@phys.ntu.edu.tw [Department of Physics, National Taiwan University, Taipei 106, Taiwan (China); Kamat, S.V. [Defence Metallurgical Research Laboratory, Hyderabad 500058 (India)

    2017-06-15

    Highlights: • Role of Ta-spacer layer in L1{sub 1}-CoPt(10 nm)/Ta//NiFe(4 nm) trilayers was investigated. • Domain size increased at the expense of magnetic phase contrast with increasing t{sub Ta}. • Tilt angle magnetization increased from 43° to 77° upon increasing t{sub Ta} (0–2.5 nm). • Micromagnetic studies confirmed the existence of tilted magnetic anisotropy. • Ta-spacer is effective in preserving competing anisotropies of CoPt and NiFe-layers. - Abstract: L1{sub 1}-CoPt/Ta/NiFe trilayers are chosen as model films for probing the role of spacer layer on tuning the tilt angle magnetization (θ{sub M}) in such exchange springs. For this purpose, a non-magnetic layer (Ta) with varying thickness (t{sub Ta}) from 0 to 2.5 nm was inserted between 10-nm thick CoPt film exhibiting strong perpendicular magnetic anisotropy (PMA) and 4-nm thick NiFe film having in-plane magnetic anisotropy (IMA). With the insertion of Ta-spacer, the magnetic hysteresis loops become more and more tilted as t{sub Ta} increases. Upon increasing the t{sub Ta} from 0 to 2.5 nm, the estimated SQR{sub ⊥} (=M{sub r⊥}/M{sub s⊥}) from the M–H loops is found to decrease moderately; while the θ{sub M} increases significantly from 43° to 77°. MFM images revealed maze-like domain patterns and the domain size tends to increase at the expense of magnetic phase contrast with increasing t{sub Ta}. Micro-magnetic simulation of tilt in the anisotropy axis with respect to the bare CoPt-layer showed a trend similar to that of those observed with the M–H loops obtained by VSM measurements. The results of present study suggest that the insertion of Ta-spacer is not only beneficial in terms of preserving the competing anisotropies such as PMA and IMA of CoPt and NiFe-layers respectively through weakened exchange coupling; but also, act as an appropriate means for realizing tunable tilted magnetic anisotropy in the L1{sub 1}-CoPt/NiFe exchange springs.

  11. Neutron spectroscopic factors of 55Ni hole-states from (p,d) transfer reactions

    International Nuclear Information System (INIS)

    Sanetullaev, A.; Tsang, M.B.; Lynch, W.G.; Lee, Jenny; Bazin, D.; Chan, K.P.; Coupland, D.; Henzl, V.; Henzlova, D.; Kilburn, M.; Rogers, A.M.; Sun, Z.Y.; Youngs, M.; Charity, R.J.; Sobotka, L.G.; Famiano, M.; Hudan, S.; Shapira, D.; Peters, W.A.; Barbieri, C.

    2014-01-01

    Spectroscopic information has been extracted on the hole-states of 55 Ni, the least known of the quartet of nuclei ( 55 Ni, 57 Ni, 55 Co and 57 Cu), one nucleon away from 56 Ni, the N=Z=28 double magic nucleus. Using the 1 H( 56 Ni,d) 55 Ni transfer reaction in inverse kinematics, neutron spectroscopic factors, spins and parities have been extracted for the f 7/2 , p 3/2 and the s 1/2 hole-states of 55 Ni. These new data provide a benchmark for large basis calculations that include nucleonic orbits in both the sd and pf shells. State of the art calculations have been performed to describe the excitation energies and spectroscopic factors of the s 1/2 hole-state below Fermi energy.

  12. Neutron spectroscopic factors of 55Ni hole-states from (p,d transfer reactions

    Directory of Open Access Journals (Sweden)

    A. Sanetullaev

    2014-09-01

    Full Text Available Spectroscopic information has been extracted on the hole-states of 55Ni, the least known of the quartet of nuclei (55Ni, 57Ni, 55Co and 57Cu, one nucleon away from 56Ni, the N=Z=28 double magic nucleus. Using the H1(Ni56,dNi55 transfer reaction in inverse kinematics, neutron spectroscopic factors, spins and parities have been extracted for the f7/2, p3/2 and the s1/2 hole-states of 55Ni. These new data provide a benchmark for large basis calculations that include nucleonic orbits in both the sd and pf shells. State of the art calculations have been performed to describe the excitation energies and spectroscopic factors of the s1/2 hole-state below Fermi energy.

  13. Neutron spectroscopic factors of {sup 55}Ni hole-states from (p,d) transfer reactions

    Energy Technology Data Exchange (ETDEWEB)

    Sanetullaev, A. [National Superconducting Cyclotron Laboratory and Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Tsang, M.B., E-mail: tsang@nscl.msu.edu [National Superconducting Cyclotron Laboratory and Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Lynch, W.G.; Lee, Jenny; Bazin, D. [National Superconducting Cyclotron Laboratory and Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Chan, K.P. [National Superconducting Cyclotron Laboratory and Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Physics Department, Hong Kong Chinese University, Shatin, Hong Kong (China); Coupland, D.; Henzl, V.; Henzlova, D.; Kilburn, M.; Rogers, A.M. [National Superconducting Cyclotron Laboratory and Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Sun, Z.Y. [National Superconducting Cyclotron Laboratory and Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Institute of Modern Physics, CAS, Lanzhou 730000 (China); Youngs, M. [National Superconducting Cyclotron Laboratory and Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Charity, R.J.; Sobotka, L.G. [Department of Chemistry, Washington University, St. Louis, MO 63130 (United States); Famiano, M. [Department of Physics, Western Michigan University, Kalamazoo, MI 49008 (United States); Hudan, S. [Department of Chemistry, Indiana University, Bloomington, IN 47405 (United States); Shapira, D. [Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Peters, W.A. [Rutgers University, Piscataway, NJ 08854 (United States); Barbieri, C. [Department of Physics, University of Surrey, Guildford GU2 7XH (United Kingdom); and others

    2014-09-07

    Spectroscopic information has been extracted on the hole-states of {sup 55}Ni, the least known of the quartet of nuclei ({sup 55}Ni, {sup 57}Ni, {sup 55}Co and {sup 57}Cu), one nucleon away from {sup 56}Ni, the N=Z=28 double magic nucleus. Using the {sup 1}H({sup 56}Ni,d){sup 55}Ni transfer reaction in inverse kinematics, neutron spectroscopic factors, spins and parities have been extracted for the f{sub 7/2}, p{sub 3/2} and the s{sub 1/2} hole-states of {sup 55}Ni. These new data provide a benchmark for large basis calculations that include nucleonic orbits in both the sd and pf shells. State of the art calculations have been performed to describe the excitation energies and spectroscopic factors of the s{sub 1/2} hole-state below Fermi energy.

  14. Synthesis and Spectroscopic Studies of Mixed Ligand Complexes of Pt(II and Pd(II with Ethyl-α-Isonitrosoacetoacetate and Dienes

    Directory of Open Access Journals (Sweden)

    Anita Krishankant Taksande

    2015-12-01

    Full Text Available The mixed ligand complexes of the kind [M(L1 (L2] where M= Pt(II, Pd(II.L1 = primary ligand ethyl-α-isonitrosoacetoacetate derived from reaction between ethyl acetoacetate, acetic acid and sodium nitrite and L2=secondary ligand para-phenyldiamine (PPD are synthesized. All the prepared complexes were identified and confirmed by elemental analysis, molar conductance measurements, and infrared electronic absorption. Their complexes has been made based on elemental analysis, molar conductivity, UV-Vis, FT-IR and 1HNMR spectroscopy and magnetic moment measurements as well as thermal analysis (TGA and DTA. The elemental analysis information recommends that the stoichiometry of the complexes to be 1:2:1. The molar conductance measurements of the complexes indicate their non-electrolytic nature. The infrared spectral information showed the coordination sites of the free ligand with the central metal particle. The electronic absorption spectral information disclosed the existence of an octahedral geometry for Pt(II and Pd(II complexes. DOI: http://dx.doi.org/10.17807/orbital.v7i4.633 

  15. A Study of the CO Sensing Responses of Cu-, Pt- and Pd-Activated SnO2 Sensors: Effect of Precipitation Agents, Dopants and Doping Methods

    Directory of Open Access Journals (Sweden)

    Venkata Krishna Karthik Tangirala

    2017-05-01

    Full Text Available In this work, we report the synthesis of Cu, Pt and Pd doped SnO2 powders and a comparative study of their CO gas sensing performance. Dopants were incorporated into SnO2 nanostructures using chemical and impregnation methods by using urea and ammonia as precipitation agents. The synthesized samples were characterized using X-ray diffraction (XRD, Raman spectroscopy, scanning electron microscopy (SEM and high resolution transmission electron microscopy (HR-TEM. The presence of dopants within the SnO2 nanostructures was evidenced from the HR-TEM results. Powders doped utilizing chemical methods with urea as precipitation agent presented higher sensing responses compared to the other forms, which is due to the formation of uniform and homogeneous particles resulting from the temperature-assisted synthesis. The particle sizes of doped SnO2 nanostructures were in the range of 40–100 nm. An enhanced sensing response around 1783 was achieved with Cu-doped SnO2 when compared with two other dopants i.e., Pt (1200 and Pd:SnO2 (502. The high sensing response of Cu:SnO2 is due to formation of CuO and its excellent association and dissociation with adsorbed atmospheric oxygen in the presence of CO at the sensor operation temperature, which results in high conductance. Cu:SnO2 may thus be an alternative and cost effective sensor for industrial applications.

  16. Preparation and characterization of platinum (Pt) and palladium (Pd) nanoparticle decorated graphene sheets and their utilization for the elimination of basic fuchsin and indigo carmine dyes

    Science.gov (United States)

    Kurt, Belma Zengin; Durmus, Zehra; Durmus, Ali

    2016-01-01

    In this study, graphene nano sheets, prepared with chemical oxidation and reduction routes via modified-Hummer method, were successfully decorated with platinum (Pt) and palladium (Pd) nanoparticles. Structural and morphological features of resulted graphene-metal nanocomposites were characterized with FT-IR, XRD, SEM and TEM methods. Anti-oxidant activity (AOA) values of nanocomposites were determined. The IC50 values of Pt-graphene and Pd-graphene nanocomposites were found to be 46.1 and 90.2 μg/mL, respectively based on the ABTS method and 80.2 and 143.7 μg/mL according to the DPPH method. It was found that the graphene-metal nanocomposites exhibited superior free radical scavenging activity compared to several types of noble metal nano particles although the nanocomposites consist of much lower amount of active metal sites than the nano-crystalline metal powders. It was consequently reported that the graphene-metal nanocomposites could be successfully used for the photocatalytic elimination of fuchsin and indigo carmine dyes under light irradiation.

  17. A Theoretical Investigation on CO Oxidation by Single-Atom Catalysts M1/γ-Al2O3(M=Pd, Fe, Co, and Ni).

    Science.gov (United States)

    Yang, Tao; Fukuda, Ryoichi; Hosokawa, Saburo; Tanaka, Tsunehiro; Sakaki, Shigeyoshi; Ehara, Masahiro

    2017-04-07

    Single-atom catalysts have attracted much interest recently because of their excellent stability, high catalytic activity, and remarkable atom efficiency. Inspired by the recent experimental discovery of a highly efficient single-atom catalyst Pd 1 /γ-Al 2 O 3 , we conducted a comprehensive DFT study on geometries, stabilities and CO oxidation catalytic activities of M 1 /γ-Al 2 O 3 (M=Pd, Fe, Co, and Ni) by using slab-model. One of the most important results here is that Ni 1 /Al 2 O 3 catalyst exhibits higher activity in CO oxidation than Pd 1 /Al 2 O 3 . The CO oxidation occurs through the Mars van Krevelen mechanism, the rate-determining step of which is the generation of CO 2 from CO through abstraction of surface oxygen. The projected density of states (PDOS) of 2 p orbitals of the surface O, the structure of CO-adsorbed surface, charge polarization of CO and charge transfer from CO to surface are important factors for these catalysts. Although the binding energies of Fe and Co with Al 2 O 3 are very large, those of Pd and Ni are small, indicating that the neighboring O atom is not strongly bound to Pd and Ni, which leads to an enhancement of the reactivity of the O atom toward CO. The metal oxidation state is suggested to be one of the crucial factors for the observed catalytic activity.

  18. XRD (X-Ray Diffraction) and nitrogen adsorption characterization of Ni-Pt/mordenite catalysts; Caracterizacao por EDX (Espectrometria de Raios-X), DRX (Difracao de Raios-X) e adsorcao de nitrogenio de catalisadores Ni/Pt/mordenita visando sua aplicacao na isomerizacao de n-hexano

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Geovana do Socorro V.; Sousa, Bianca V.; Rodrigues, Meiry Glaucia F. [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2008-07-01

    The search for molecules of high octane arose great interest in the isomerization processes. Catalysts to the zeolite base have been wide developed for the n-paraffins isomerization. In this work, bimetallic bifunctional catalysts supported on Mordenite zeolite were prepared samples containing 60Pt40Ni (wt.%) metal (Pt). The catalysts were obtained by competitive ion exchange using aqueous solutions of [Pt(NH{sub 3}){sub 4}]Cl{sub 2} and Ni(NH{sub 3}){sub 6}]Cl{sub 2} complexes. The EDS characterization analyses showed incorporation of the nickel and platinum mordenite zeolite. The diffractograms showed competitive ion exchange and calcination processes did not provoke appreciable changes in the zeolitic support framework. The peaks attributed to nickel and platinum oxides was possible to observe in the bimetallic catalysts 60Ni40Pt/MOR. The results of the N{sub 2} physical adsorption of the 60Ni40Pt/MOR showed that it did not have modification in the superficial area of the catalysts. (author)

  19. Raman spectroscopy of DNA-metal complexes. I. Interactions and conformational effects of the divalent cations: Mg, Ca, Sr, Ba, Mn, Co, Ni, Cu, Pd, and Cd.

    OpenAIRE

    Duguid, J.; Bloomfield, V. A.; Benevides, J.; Thomas, G. J.

    1993-01-01

    Interactions of divalent metal cations (Mg2+, Ca2+, Ba2+, Sr2+, Mn2+, Co2+, Ni2+, Cu2+, Pd2+, and Cd2+) with DNA have been investigated by laser Raman spectroscopy. Both genomic calf-thymus DNA (> 23 kilobase pairs) and mononucleosomal fragments (160 base pairs) were employed as targets of metal interaction in solutions containing 5 weight-% DNA and metal:phosphate molar ratios of 0.6:1. Raman difference spectra reveal that transition metal cations (Mn2+, Co2+, Ni2+, Cu2+, Pd2+, and Cd2+) ind...

  20. Oxidation of CO and Methanol on Pd-Ni Catalysts Supported on Different Chemically-Treated Carbon Nanofibers

    Science.gov (United States)

    Calderón, Juan Carlos; Rios Ráfales, Miguel; Nieto-Monge, María Jesús; Pardo, Juan Ignacio; Moliner, Rafael; Lázaro, María Jesús

    2016-01-01

    In this work, palladium-nickel nanoparticles supported on carbon nanofibers were synthesized, with metal contents close to 25 wt % and Pd:Ni atomic ratios near to 1:2. These catalysts were previously studied in order to determine their activity toward the oxygen reduction reaction. Before the deposition of metals, the carbon nanofibers were chemically treated in order to generate oxygen and nitrogen groups on their surface. Transmission electron microscopy analysis (TEM) images revealed particle diameters between 3 and 4 nm, overcoming the sizes observed for the nanoparticles supported on carbon black (catalyst Pd-Ni CB 1:2). From the CO oxidation at different temperatures, the activation energy Eact for this reaction was determined. These values indicated a high tolerance of the catalysts toward the CO poisoning, especially in the case of the catalysts supported on the non-chemically treated carbon nanofibers. On the other hand, apparent activation energy Eap for the methanol oxidation was also determined finding—as a rate determining step—the COads diffusion to the OHads for the catalysts supported on carbon nanofibers. The results here presented showed that the surface functional groups only play a role in the obtaining of lower particle sizes, which is an important factor in the obtaining of low CO oxidation activation energies. PMID:28335315

  1. Oxidation of CO and Methanol on Pd-Ni Catalysts Supported on Different Chemically-Treated Carbon Nanofibers

    Directory of Open Access Journals (Sweden)

    Juan Carlos Calderón

    2016-10-01

    Full Text Available In this work, palladium-nickel nanoparticles supported on carbon nanofibers were synthesized, with metal contents close to 25 wt % and Pd:Ni atomic ratios near to 1:2. These catalysts were previously studied in order to determine their activity toward the oxygen reduction reaction. Before the deposition of metals, the carbon nanofibers were chemically treated in order to generate oxygen and nitrogen groups on their surface. Transmission electron microscopy analysis (TEM images revealed particle diameters between 3 and 4 nm, overcoming the sizes observed for the nanoparticles supported on carbon black (catalyst Pd-Ni CB 1:2. From the CO oxidation at different temperatures, the activation energy Eact for this reaction was determined. These values indicated a high tolerance of the catalysts toward the CO poisoning, especially in the case of the catalysts supported on the non-chemically treated carbon nanofibers. On the other hand, apparent activation energy Eap for the methanol oxidation was also determined finding—as a rate determining step—the COads diffusion to the OHads for the catalysts supported on carbon nanofibers. The results here presented showed that the surface functional groups only play a role in the obtaining of lower particle sizes, which is an important factor in the obtaining of low CO oxidation activation energies.

  2. Model bimetallic Pd-Ni automotive exhaust catalysts. Influence of thermal aging and hydrocarbon self-poisoning

    Energy Technology Data Exchange (ETDEWEB)

    Hungria, A.B.; Martinez-Arias, A. [Instituto de Catalisis y Petroleoquimica, CSIC, C/Marie Curie 2, Campus Cantoblanco, 28049 Madrid (Spain); Calvino, J.J. [Dpto. de Ciencia de los Materiales e Ingenieria Metalurgica y Quimica Inorganica, Facultad de Ciencias, Universidad de Cadiz, 11510 Puerto Real, Cadiz (Spain); Anderson, J.A. [Surface Chemistry and Catalysis Group, Department of Chemistry, University of Aberdeen, AB24 3UE Scotland (United Kingdom)

    2006-02-22

    Bimetallic Pd-Ni catalysts supported on Al{sub 2}O{sub 3} and (Ce,Zr)O{sub x}/Al{sub 2}O{sub 3} were examined with respect to their catalytic performance for the elimination of CO, NO and C{sub 3}H{sub 6} under stoichiometric conditions. The effects of a thermal aging treatment at 1273K, reactant competition in the presence of the hydrocarbon and the influence of the presence of nickel in the catalyst have been analysed by XRD, HREM, catalytic activity measurements and in situ DRIFTS spectroscopy. Self-poisoning effects, induced by the presence of the hydrocarbon in the reactant mixture, were identified as the main factor affecting the light-off activity. While a Ni-induced preferential interaction between Pd and the Ce-Zr mixed oxide component appears, in general terms, to be beneficial for the catalytic performance of the fresh (Ce,Zr)O{sub x}/Al{sub 2}O{sub 3}-supported bimetallic catalyst, it is shown to be detrimental for the aged system as a consequence of a facilitated degradation of the (Ce,Zr)O{sub x} component and encapsulation of the active palladium particles. (author)

  3. Epitaxial Ni-Mn-Ga-Co thin films on PMN-PT substrates for multicaloric applications

    Energy Technology Data Exchange (ETDEWEB)

    Schleicher, B., E-mail: b.schleicher@ifw-dresden.de; Niemann, R.; Schultz, L.; Fähler, S. [IFW Dresden, Institute for Metallic Materials, P.O. Box 270116, D-01171 Dresden (Germany); TU Dresden, Institute for Solid State Physics, D-01062 Dresden (Germany); Diestel, A.; Hühne, R. [IFW Dresden, Institute for Metallic Materials, P.O. Box 270116, D-01171 Dresden (Germany)

    2015-08-07

    Multicaloric stacks consisting of a magnetocaloric film on a piezoelectric substrate promise improved caloric properties as the transition temperature can be controlled by both magnetic and electric fields. We present epitaxially grown magnetocaloric Ni-Mn-Ga-Co thin films on ferroelectric Pb(Mg{sub 1/3}Nb{sub 2/3}){sub 0.72}Ti{sub 0.28}O{sub 3} substrates. Structure and microstructure of two samples, being in the austenitic and martensitic state at room temperature, are investigated by X-ray diffraction in two- and four-circle geometry and by atomic force microscopy. In addition, high temperature magnetometry was performed on the latter sample. The combination of these methods allows separating the influence of epitaxial growth and martensitic transformation. A preferential alignment of twin boundaries is observed already in the as-deposited state, which indicates the presence of prestress, without applying an electric field to the substrate. A temperature-magnetic field phase diagram is presented, which demonstrates the inverse magnetocaloric effect of the epitaxial Ni-Mn-Ga-Co film.

  4. Activity on Trypanosoma cruzi, erythrocytes lysis and biologically relevant physicochemical properties of Pd(II) and Pt(II) complexes of thiosemicarbazones derived from 1-indanones.

    Science.gov (United States)

    Santos, Diego; Parajón-Costa, Beatriz; Rossi, Miriam; Caruso, Francesco; Benítez, Diego; Varela, Javier; Cerecetto, Hugo; González, Mercedes; Gómez, Natalia; Caputto, María E; Moglioni, Albertina G; Moltrasio, Graciela Y; Finkielsztein, Liliana M; Gambino, Dinorah

    2012-12-01

    American trypanosomiasis or Chagas disease, caused by the protist parasite Trypanosoma cruzi (T. cruzi), is a major health concern in Latin America. In the search for new bioactive compounds, eight Pd(II) and Pt(II) complexes of thiosemicarbazones derived from 1-indanones (HL) were evaluated as potential anti-T. cruzi compounds. Their unspecific cytotoxicity was determined on human erythrocytes. Two physicochemical features, lipophilicity and redox behavior, that could be potentially relevant for the biological activity of these complexes, were determined. Crystal structure of [Pd(HL1)(L1)]Cl·CH(3)OH, where HL1=1-indanone thiosemicarbazone, was solved by X-ray diffraction methods. Five of the eight metal complexes showed activity against T. cruzi with IC(50) values in the low micromolar range and showed significantly higher activity than the corresponding free ligands. Four of them resulted more active against the parasite than the reference antitrypanosomal drug Nifurtimox. Anti-T. cruzi activity and selectivity towards the parasite were both higher for the Pd(II) compounds than for the Pt(II) analogues, showing the effect of the metal center selection on the biological behavior. Among both physicochemical features tested for this series of compounds, lipophilicity and redox behavior, only the former seemed to show correlation with the antiproliferative effects observed. Metal coordination improved bioactivity but lead to an increase of mammalian cytotoxicity. Nevertheless, some of the metal complexes tested in this work still show suitable selectivity indexes and deserve further developments. Copyright © 2012 Elsevier Inc. All rights reserved.

  5. A DFT study of Ru, Rh, Pd, Os, Ir, and Pt clusters as catalysts for methane dissociation in a direct methane fuel cell (DMHFC)

    Energy Technology Data Exchange (ETDEWEB)

    Psofogiannakisa, G. [Ottawa Univ., Ottawa, ON (Canada). Dept. of Chemical Engineering; Ottawa, Univ., Ottawa, ON (Canada). Centre for Catalysis Research and Innovation; St-Amant, A. [Ottawa Univ., Ottawa, ON (Canada). Dept. of Chemistry; Ternan, M. [Ottawa Univ., Ottawa, ON (Canada). Centre for Catalysis Research and Innovation; EnPross Inc., Ottawa, ON (Canada)

    2008-07-01

    The rate limiting step in a direct methane hydrocarbon fuel cell (DMHFC) is the dissociative chemisorption of methane. Quantum mechanical computations were used to examine the terrace, kink, and step sites on 6 different clusters of group 8 transition metals, notably Ru, Rh, Pd, Os, Ir, and Pt. The computations involved the anodic reaction of a DMHFC with a polymer electrolyte that operates at atmospheric pressure and temperatures higher than 120 degrees C. The interaction between molecular fragments and a surface (Pt) were described and density functional theory (DFT) calculations were performed using Guassian software. The geometries of 5 different platinum clusters were examined along with their electronic energy barriers. The biggest contribution to the stabilization energy came from the overlap between the sigma bond in methane and unoccupied sd hybrid orbitals in the Pt bonding atom. The study showed that when relaxation was allowed, the displacement of the bonding metal atom was 0.36 to 0.52 A. The electronic energy barrier often increased as d-orbital occupancy increased. For the kink surface sites, the energy barriers were considerably smaller for the 5d transition metals than for the 4d transition metals. 5 refs., 1 tab.

  6. Ce{sub 2}PdIn{sub 8}, Ce{sub 3}PdIn{sub 11} and Ce{sub 5}Pd{sub 2}In{sub 19}—members of homological series based on AuCu{sub 3}- and PtHg{sub 2}-type structural units

    Energy Technology Data Exchange (ETDEWEB)

    Tursina, A.; Nesterenko, S.; Seropegin, Y. [Department of Chemistry, Lomonosov Moscow State University, Moscow 119991 (Russian Federation); Noël, H. [Laboratoire de Chimie du Solide et Matériaux, UMR6226 CNRS-Université de Rennes 1, Avenue du Général Leclerc, Rennes 30542 (France); Kaczorowski, D., E-mail: D.Kaczorowski@int.pan.wroc.pl [Institute of Low Temperature and Structure Research, Polish Academy of Sciences, P.O.Box 1410, Wrocław 50-950 (Poland)

    2013-04-15

    Crystal structures of three members of a unique homological series with the general formula Ce{sub m}Pd{sub n}In{sub 3m+2n} based on the AuCu{sub 3} and PtHg{sub 2} structure types were studied by single-crystal X-ray diffraction. The compounds crystallize with space group P4/mmm (Z=1) and the lattice parameters: a=4.6900(9) Å, c=12.185(6) Å for Ce{sub 2}PdIn{sub 8}, a=4.6846(8) Å, c=16.846(8) Å for Ce{sub 3}PdIn{sub 11}, and a=4.70120(10) Å, c=29.1359(4) Å for Ce{sub 5}Pd{sub 2}In{sub 19}. The crystal structures of Ce{sub 3}PdIn{sub 11} and Ce{sub 5}Pd{sub 2}In{sub 19} represent new types. The three structures constitute of [CeIn{sub 3}] cuboctahedra layers and [PdIn{sub 2}] rectangular polyhedra layers, alternating along the tetragonal c-axis in accordance with the m:n proportion. The magnetic and electrical transport properties of the novel compounds Ce{sub 3}PdIn{sub 11} and Ce{sub 5}Pd{sub 2}In{sub 19} were investigated down to 1.72 K. Both indides are Curie–Weiss paramagnets due to the presence of fairly well localized 4f electrons of trivalent cerium ions. The electrical resistivity of both materials is dominated over an extended temperature range by strong spin–flip Kondo interactions with the characteristic temperature scale of 20–30 K. - Graphical abstract: TOC Figure Crystal structures of Ce{sub 3}PdIn{sub 11}, Ce{sub 2}PdIn{sub 8}, and Ce{sub 5}Pd{sub 2}In{sub 19}. Highlights: ► Large section of Ce–Pd–In phase diagram was examined. ► Three distinct ternary phases were identified, two of them for the first time. ► Crystal structures of two novel compounds constitute new structure types. ► The determined crystal structures show close mutual relationship. ► Ce{sub 3}PdIn{sub 11} and Ce{sub 5}Pd{sub 2}In{sub 19} are paramagnetic Kondo lattices.

  7. Pd Nanoparticles-Supported Carbon Nanotube-Encapsulated NiO/MgO Composite as an Enhanced Electrocatalyst for Ethanol Electrooxidation in Alkaline Medium

    DEFF Research Database (Denmark)

    Mahendiran, Chinnathambi; Rajesh, Dhanushkotti; Maiyalagan, Thandavarayan

    2017-01-01

    In this work, an easy method is developed to prepare well-dispersed palladium nanoparticles into the carbon nanotube (CNT) encapsulated NiO/MgO nanocomposite by the chemical reduction method. CNT encapsulated NiO/MgO nanocomposite were prepared by autogenous pressure at elevated temperature (RAPE...... electrochemical performance can be attributed on the one hand to the incorporation of NiO/MgO on palladium on the other hand to the porous tubular morphology of the CNT leads to high dispersion of Pd nanoparticles and also enhances the mass transport of the electrode.......In this work, an easy method is developed to prepare well-dispersed palladium nanoparticles into the carbon nanotube (CNT) encapsulated NiO/MgO nanocomposite by the chemical reduction method. CNT encapsulated NiO/MgO nanocomposite were prepared by autogenous pressure at elevated temperature (RAPET......) method. The Pd/(NiO/MgO-CNT) catalyst was characterized using X-ray difraction (XRD), scanning electron microscopy (SEM), higher resolution-transmission electron microscopy (HR-TEM), Raman spectroscopy and electrochemical analysis. Electrochemical measurements demonstrate the as synthesized Pd...

  8. Synthesis and characterization of bimetallic Pd-Ni catalysts in a CeO2 matrix for the generation of H2 by the reforming reaction of methanol

    International Nuclear Information System (INIS)

    Contreras C, R.

    2016-01-01

    The hydrothermal method was used for the synthesis of CeO 2 nano rods using Ce(NO 3 ) 3 ·6H 2 O and NH 4 OH. The catalytic support was calcined at 700 degrees Celsius. The synthesis of CeO 2 nano rods were impregnated with an aqueous solution of Ni(NO 3 ) 2 ·6H 2 O by an incipient wetness impregnation method at an appropriate concentration to yield 5 and 15% of Ni in the catalysts. Then 0.5% of Pd was impregnated using PdCl 2 . The samples obtained were calcined at 400 and reduced at 450 degrees Celsius. The catalytic materials were characterized by: temperature programmed reduction (TPR), Scanning Electron Microscopy (Sem) , surface area and X-ray diffraction (XRD) . Sem results showed that the CeO 2 is formed by nano rods and in lesser proportion semi spherical particles. Bet surface area of the catalysts decreases with Ni loading onto the CeO 2 nano rods. Pd O and Ni O were reduced at low and high temperature as was observed by TPR. The CeO 2 one-dimensional nano rods showed a highly crystalline structure with sharp diffraction peaks, with a typical fluorite structure (cubic structure of the CeO 2 ) and characteristic peaks corresponding to metallic Ni. No diffraction peaks of Pd were found. This is due to the low concentration of this metal in the catalyst. These catalysts showed high activity and selectivity to H 2 at maximum reaction temperature. According to the results of activity and selectivity, the catalysts with Pd-Ni are an alternative for the H 2 production in auto thermal reforming reaction of methanol. (Author)

  9. Fracture mechanics behavior of a Ni-Fe superalloy sheath for superconducting fusion magnets. Pt. 2. Magnet life analysis model

    International Nuclear Information System (INIS)

    Kim, J.H.

    1997-01-01

    For pt.1 see ibid., p.251-67,(1997). From previous results of fatigue crack growth and fracture toughness measurements for a Ni-Fe base superalloy, a primary candidate for the International Thermonuclear Experimental Reactor (ITER) central solenoid (CS) conduit, we derive an improved magnet life analysis model from the framework of Newman and Raju. For the superalloy conduit with an initial semielliptical surface crack in its thickness direction, the model predicts the evolution of crack aspect ratio for a wide range of initial crack geometries under pure tension and bending fatigue. The prediction of final fracture due to fatigue crack growth using the linear elastic fracture mechanics approach is shown to be underconservative. An alternative model based on Newman's elastic-plastic fracture toughness parameter is derived for the base metal with nearly semicircular cracks. The improved life analysis model taking into account the fatigue and fracture behavior is applied to the ITER CS magnet and the results are compared with those from earlier models. Accounting for the crack shape evolution leads to significantly longer life compared to assuming a constant aspect ratio. For the superalloy base metal we find that the expected fatigue life of engineering design activity design of the CS magnet is about eight times the design requirement. Even the conceptual design activity design with a free-standing CS meets the life requirement when analyzed by the improved model. (orig.)

  10. P-phase precipitation and its effect on martensitic transformation in (Ni,Pt)Ti shape memory alloys

    International Nuclear Information System (INIS)

    Gao, Y.; Zhou, N.; Yang, F.; Cui, Y.; Kovarik, L.; Hatcher, N.; Noebe, R.; Mills, M.J.; Wang, Y.

    2012-01-01

    A new precipitate phase named P-phase has recently been identified in (Ni,Pt)Ti high temperature shape memory alloys. In order to understand the roles played by the fine coherent P-phase precipitates in determining the martensitic transformation temperature (M s ), strength of the B2 matrix phase, dimensional stability and shape memory effect of the alloys, a phase field model of P-phase precipitation is developed. Model inputs, including lattice parameters, precipitate–matrix orientation relationship, elastic constants and free energy data, are obtained from experimental characterization, ab initio calculations and thermodynamic databases. Through computer simulations, the shape and spatial distribution of the P-phase precipitates, as well as the compositional and stress fields around them, are quantitatively determined. On this basis, the elastic interaction energy between the P-phase precipitates and a martenstic nucleus is calculated. It is found that both the chemical non-uniformity and stress field associated with the P-phase precipitates are in favor of the martensitic transformation. Their relative contributions to the increase in M s temperature are quantified as a function of aging time and the result seems to agree with the experimental measurements. The shape and spatial distribution of the P-phase precipitates predicted by the simulations also agree well with experimental observations.

  11. Electronic Structure, Mechanical and Dynamical Stability of Hexagonal Subcarbides M2C (M = Tc, Ru, Rh, Pd, Re, Os, Ir, and Pt): Ab Initio Calculations

    Science.gov (United States)

    Suetin, D. V.; Shein, I. R.

    2018-02-01

    Ab initio calculations were used to study the properties of a series of hexagonal (Fe2N-like) subcarbides M2C, where M = Tc, Ru, Rh, Pd, Re, Os, Ir, and Pt, and to calculate their equilibrium structural parameters, electronic properties, phase stability, elastic constants, compression modulus, shear modulus, Young's modulus, compressibility, Pugh's indicator, Poisson ratio, elastic anisotropy indices, and also hardness, Debye temperature, sound velocity, and low-temperature heat capacity. It is found based on these results that all the subcarbides are mechanically stable; however, their formation energies E form are positive with respect to a mixture of d-metal and graphite. In addition, the calculation of the phonon spectra of these subcarbides shows the existence of negative modes, which indicates their dynamical instability. Thus, a successful synthesis of these subcarbides at normal conditions is highly improbable.

  12. New insight into electrochemical-induced synthesis of NiAl2O4/Al2O3: Synergistic effect of surface hydroxyl groups and magnetism for enhanced adsorptivity of Pd(II)

    International Nuclear Information System (INIS)

    Salleh, N.F.M.; Jalil, A.A.; Triwahyono, S.; Efendi, J.; Mukti, R.R.; Hameed, B.H.

    2015-01-01

    Graphical abstract: - Highlights: • The introduction of Ni to γ-Al 2 O 3 by electrolysis formed NiAl 2 O 4 spinels and NiO. • Physical mixed of NiO with γ-Al 2 O 3 only produced agglomerated NiO-Ni 0 . • Ni/Al 2 O 3 -E has remarkably higher degree of magnetism than Ni/Al 2 O 3 -PM. • Ni/Al 2 O 3 -E adsorbed Pd 2+ ions more effectively (q m = 40.3 mg/g) than Ni/Al 2 O 3 -PM. • Pd 2+ ions were adsorbed to both samples via magnetic attraction and ion exchange. - Abstract: A new promising adsorbent, Ni supported on γ-Al 2 O 3 was prepared in a simple electrolysis system (Ni/Al 2 O 3 -E) in minutes and was compared with the sample prepared by a physical mixing method (Ni/Al 2 O 3 -PM). The adsorbents were characterized by XRD, TEM, FTIR, 27 Al MAS NMR, XPS, and VSM. The results showed that besides NiO nanoparticles, a NiAl 2 O 4 spinel was also formed in Ni/Al 2 O 3 -E during the electrolysis via the dealumination and isomorphous substitution of Ni 2+ ions. In contrast, only agglomerated NiO was found in the Ni/Al 2 O 3 -PM. Adsorption test on removal of Pd 2+ ions from aqueous solution showed that the Pd 2+ ions were exchanged with the hydrogen atoms of the surface–OH groups of both adsorbents. Significantly, the Ni/Al 2 O 3 -E demonstrated a higher adsorption towards Pd 2+ ions than Ni/Al 2 O 3 -PM due to its remarkably higher degree of magnetism, which came from the NiAl 2 O 4 . The use of 0.1 g L −1 Ni/Al 2 O 3 -E gave the maximum monolayer adsorption capacity (q m ) of 40.3 mg g −1 at 303 K and pH 5. The Ni/Al 2 O 3 -E showed high potential for simultaneous removal of various noble and transition metal ions and could be also used repetitively without affecting the high adsorptivity for Pd 2+ ions. This work may provide promising adsorbents for recovery of various metals as well as other materials for such related applications

  13. Interplay of electronic, structural and magnetic properties as the driving feature of high-entropy CoCrFeNiPd alloys

    Science.gov (United States)

    Calvo-Dahlborg, M.; Cornide, J.; Tobola, J.; Nguyen-Manh, D.; Wróbel, J. S.; Juraszek, J.; Jouen, S.; Dahlborg, U.

    2017-05-01

    The structural and magnetic properties of CoCrFe y Ni and CoCrFeNi-Pd x alloys earlier investigated experimentally by x-ray and neutron diffraction techniques and magnetometry have been theoretically reproduced using two complementary approaches for electronic structure calculations, i.e. the Korringa-Kohn-Rostoker method with the coherent potential approximation (KKR-CPA) and implemented in the ab initio framework of density functional theory and the Vienna ab initio simulation package (VASP) for supercell models of high-entropy alloy (HEA) structures. The comparison between experimental results and calculations of the lattice constants by both calculation methods indicate that the structure of CoCrFe y Ni is well described by ordered fcc configurations. The values of local magnetic moments on Fe, Co, Cr, and Ni atoms depend not only on the Pd concentration but on chemical disordering. In the case of the CoCrFeNi-Pd x alloys, the KKR-CPA and the VASP calculations of disordered configurations reproduce the experimental values at 5 K up to equimolar composition and at 300 K above. The experimental values above the equimolar composition at 5 K are not satisfactorily reproduced by any of the calculations. The divergence between the experimental and calculated values is related to the variation of the ferromagnetic to paramagnetic transition temperature as a function of palladium content and to the existence of several phases, FeCoCr-rich above room temperature and FeCrPd-rich below, observed by diffraction and detected by microscopy and atom probe investigations. VASP calculations of a FeCrPd-rich phase effectively reproduced both the lattice constant and magnetization of the alloy above equimolar composition. An important conclusion of this work is that the combined analysis of the electronic, structural, and magnetic properties plays an important role in understanding the complexity of magnetic HEAs.

  14. A comparative study of hydrogen uptake features of Co, Ni and Pd modified nanofibres and activated carbon

    Energy Technology Data Exchange (ETDEWEB)

    D' Elia, Luis F.; Gonzalez, I.; Saavedra, K.; Gottberg, V. [Petroleos de Venezuela (PDVSA)-Intevep, Gerencia General de Refinacion e Industrializacion, Gerencia Tecnica de Refinacion, Apartado 76343, Caracas 1070-A (Venezuela)

    2009-02-15

    Hydrogen represents a notable R and D area due to its impact on short and middle term energy business. Implementation of the so-called hydrogen economy still faces some technological breakthroughs. The most predominant belongs to storage; its state of the art is mainly focused on solid-state phenomena through physisorption or chemisorption. It has been found that thermal and acid pre-treatments of carbon nanofibres and activated carbon have opposite effects on hydrogen uptake levels. Thermal pre-treatment enhances hydrogen uptake; nonetheless, acid pre-treatment does not favour hydrogen-carbon interactions. Pd modified thermally-acidic pre-treated carbon materials have reversible hydrogen uptakes at the evaluated condition. On the other hand, Ni and Co modified thermally-acidic pre-treated carbon materials certainly uptake hydrogen, but it is not solely released (H{sub 2}O and CH{sub 4} are produced). (author)

  15. Ultrasound-induced crystallization around the glass transition temperature for Pd40Ni40P20 metallic glass

    International Nuclear Information System (INIS)

    Ichitsubo, Tetsu; Matsubara, Eiichiro; Kai, Satoshi; Hirao, Masahiko

    2004-01-01

    We have found that crystallization of a Pd 40 Ni 40 P 20 bulk metallic glass is accelerated in the vicinity of the glass transition temperature T g when it is subjected to sub/low-MHz frequency ultrasonic vibration. Resonance frequencies and internal frictions have been measured with the electromagnetic acoustic resonance (EMAR) technique. In the initial heating process of an as-cast glassy sample, the resonance frequencies jump up just above T g under ultrasonic excitation, which is attributed to nano-crystallization that is confirmed by the X-ray diffraction profile. However, such a notable change is not observed without ultrasonic vibration. The irregular Λ-shaped internal-friction peaks are also observed prior to the abrupt crystallization. This rapid crystallization is considered to be caused by a stochastic resonance, in which the jump frequency of atoms matches the frequency of the interatomic-potential change by the ultrasonic vibration

  16. Ni-Pd-Al2O3 catalyst supported on reticulated ceramic foam for dry methane reforming

    Directory of Open Access Journals (Sweden)

    Vesna Nikolić

    2015-03-01

    Full Text Available In the present study, Ni-Pd/Al2O3 catalyst supported on α-Al2O3 based foam was prepared and evaluated in the dry methane reforming process. Corresponding metal chlorides were deposited to the foam surface by impregnation of the foam with ultrasonically aerosolized salt solutions at 473 K and drying at that temperature. Calcination step was excluded and the catalyst was reduced at very low temperature – 533 K. The reforming experiment lasted for 3 h, with standing time of 1 h at the following temperatures: 873, 973 and 1023 K. Conclusions on selectivity, catalytic activity and stability were reached on the basis of CO and H2 yields.

  17. Preparation, characterization and electrocatalytic activity for oxygen reduction reaction in PEMFCs of bimetallic PdNi nanoalloy

    Directory of Open Access Journals (Sweden)

    E. F. Abo Zeid

    2017-09-01

    Full Text Available Abstract The modified polyol reduction method was used to prepare a carbon-supported bimetallic PdNi nanoalloys (BMNAs. The prepared catalyst was characterized using X-ray diffraction and transmission electron microscopy. The obtained data indicated that, the average particle size of the alloys in the range ≈ 20–50 nm. The morphology structure shows uniformly distributed particles on the supported carbon surface. The catalytic activity of the compounds for oxygen reduction reaction was investigated by cyclic voltammetry and electrochemical polarization measurements in rotating disk electrodes. As a function of time and calcination temperature, the improved activity and stability were obtained at 300 °C for 3 h.

  18. Reversal mode instability and magnetoresistance in perpendicular (Co/Pd)/Cu/(Co/Ni) pseudo-spin-valves

    Science.gov (United States)

    Davies, J. E.; Gilbert, D. A.; Mohseni, S. M.; Dumas, R. K.; Åkerman, J.; Liu, Kai

    2013-07-01

    We have observed distinct temperature-dependent magnetization reversal modes in a perpendicular (Co/Pd)4/Co/Cu/(Co/Ni)4/Co pseudo-spin-valve, which are correlated with spin-transport properties. At 300 K, magnetization reversal occurs by vertically correlated domains. Below 200 K the hysteresis loop becomes bifurcated due to laterally correlated reversal of the individual stacks. The magnetic configuration change also leads to higher spin disorders and a significant increase in the giant magnetoresistance effect. First order reversal curve measurements reveal that the coupled state can be re-established through field cycling and allow direct determination of the interlayer coupling strength as a function of temperature.

  19. The effect of a fourth element (Co, Cu, Fe, Pd) on the standard enthalpy of formation of the Heusler compound Ni{sub 2}MnSn

    Energy Technology Data Exchange (ETDEWEB)

    Yin, Ming, E-mail: myin1@hawk.iit.edu; Nash, Philip

    2016-05-15

    The standard enthalpies of formation of quaternary Heusler compounds (X, Ni){sub 2}MnSn (X = Co, Cu, Fe, Pd) were investigated experimentally using high temperature direct reaction calorimetry. Lattice parameters of these compounds were determined using X-ray diffraction analysis. Microstructures were identified using scanning electron microscopy and energy dispersive spectroscopy. The effect of an additional X element on the standard enthalpy of formation of the Heusler compound Ni{sub 2}MnSn is discussed. - Highlights: • Enthalpies of formation of (X,Ni){sub 2}YZ (X = Co, Cu, Fe, Pd) were measured by drop calorimeters. • Magnetic contribution to enthalpy of formation plays an important role. • Introducing a fourth element could stabilize an unstable Heusler structure. • Lattice parameters do not necessarily obey the Vegard's law. • It is possible to tailor properties of Heusler compounds with enough background information.

  20. Bis(diphenylphosphino)methane-phosphonate ligands and their Pd(II), Ni(II) and Cu(I) complexes. Catalytic oligomerization of ethylene.

    Science.gov (United States)

    Hamada, Adel; Braunstein, Pierre

    2009-02-16

    The bis(diphenylphosphino)methane-phosphonate-based (dppm-phosphonate) ligands (Ph(2)P)(2)CHP(O)(OR)(2) (R = Me, L(1); R = Ph, L(2)) form metal complexes by selective coordination of the diphosphine moiety to Pd(II) and Ni(II) centers. The formation of complexes containing the chelating, deprotonated form of ligand L(1) or L(2) occurred when basic ligands were present in the precursor complex, such as Me or dmba (on Pd(II)) or acac (on Ni(II)). The Cu(I) complex [CuL(1)](2)(BF(4))(2) (9) was obtained that is suggested to be dinuclear, each Cu(I) being chelated by a phosphine and a P=O donor and further bound to the phosphine group of another ligand. The crystal structures of the mononuclear complexes [PdCl(2){(Ph(2)P)(2)CHP(O)(OMe)(2)-P,P}] (2a), [PdCl(2){(Ph(2)P)(2)CHP(O)(OPh)(2)-P,P}] (2b), [Pd{(Ph(2)P)(2)CP(O)(OMe)(2)-P,P}(2)] (6a) in 6a.2CH(2)Cl(2), [Pd{(Ph(2)P)(2)CP(O)(OPh)(2)-P,P}(2)] (6b), [Ni{(Ph(2)P)(2)CP(O)(OMe)(2)-P,P}(2)] (10a) in 10a.4CHCl(3), [Ni{(Ph(2)P)(2)CP(O)(OPh)(2)-P,P}(2)] (10b) in 10b.4CHCl(3), [NiCl(2){(Ph(2)P)(2)CHP(O)(OMe)(2)-P,P}] (11a) in 11a.CHCl(3) and of the dinuclear complexes [Pd(mu-Cl){(Ph(2)P)(2)CP(O)(OMe)(2)-P,P}](2) (7a) and [Pd(mu-Cl){(Ph(2)P)(2)CP(O)(OPh)(2)-P,P}](2) (7b) have been determined by X-ray diffraction. The complexes [Ni{(Ph(2)P)(2)CC(O)NPh(2)-P,P}(2)] (13) and [Ni{Ph(2)PC(Ph)P(O)(OEt)(2)-P,O}(2)] (15) were prepared by reaction of [Ni(acac)(2)] with the known, neutral ligands (Ph(2)P)(2)CHC(O)NPh(2) and Ph(2)PCH(Ph)P(O)(OEt)(2), respectively. The Ni(II) complexes were evaluated for the catalytic oligomerization of ethylene and afforded similar results when AlEtCl(2) was used as cocatalyst. Complexes 11a,b were the most active, with a turnover frequency (TOF) of 78 300 mol of C(2)H(4)/(mol of Ni)h) for complex 11b in the presence of 10 equiv of AlEtCl(2) and showed a high selectivity for C(4) and C(6) olefins with up to 93% C(4) for 10a in the presence of 6 equiv AlEtCl(2), whereas when only 3 equiv cocatalyst was

  1. Magnetic structures of new uranium or rare earth based ternary stannides T{sub 2}M{sub 2}Sn (T = RE, U and M = Ni, Pd); Structures magnetiques de nouveaux stannures ternaires a base d'uranium ou de terres rares T{sub 2}M{sub 2}Sn (T=U, RE et M=Ni, Pd)

    Energy Technology Data Exchange (ETDEWEB)

    Laffargue, D

    1997-07-15

    Magnetic structures of new ternary stannides T{sub 2}M{sub 2}Sn (T = U, RE and M Ni, Pd) have been determined by powder neutron diffraction. A precise study of U{sub 2}M{sub 2}Sn (M = Ni, Pd) compounds showed several relations between structural and magnetic properties. The hybridization effects between 5f(U) and 3d(Ni) states is responsible for the weak magnetic moment observed on the uranium atoms in U{sub 2}Ni{sub 2}Sn, and explains why this stannide is close to a magnetic instability. In the system U{sub 2}Pd{sub 2+x}Sn{sub 1-x}, the reduction of the magnetic moment when the palladium composition increases shows the influence of 5f(U) - 4d(Pd) hybridization. In this solid solution, the evolution of the magnetic structure with the composition confirms an empirical law: the uranium magnetic moments are directed perpendicularly to the shortest U-U links. The extension of this study to the new Rare Earth based stannides RE{sub 2}Pd{sub 2,04}Sn{sub 0,96} (RE = Ce, Tb, Dy, Ho, Er) evidenced systematic correlations between complicated magnetic structures. All these compounds present two magnetic transitions, characterized first by a sine-wave modulation, then at lower temperatures by a commensurate magnetic structure. (author)

  2. Thermal expansion and magnetostriction of UPd 3 and U(Pd 1- xPt x) 3 single crystals

    Science.gov (United States)

    Zochowski, S. W.; McEwen, K. A.

    1994-04-01

    The localised-moment system UPd 3 exhibits quadrupolar and magnetic phase transitions, at T1 ≈ 7 K and T2 ≈ 4.5 K, respectively. We have followed the magnetic field dependence of the transitions in thermal expansion and magnetostriction measurements. The thermal expansion is large and highly anisotropic, as is the magnetostriction below T2. The transitions are extremely sensitive to Pt doping.

  3. Polyoxometalate-Surfactant Hybrids Directed Assembly of Ni3S2 into Hollow Microsphere as Pt-Comparable Electrocatalyst for Hydrogen Evolution Reaction in Alkaline Medium.

    Science.gov (United States)

    Tian, Bin; Lei, Jinlong; Wang, Jiahai

    2017-11-22

    A large surface area of catalytic sites and low electric resistance are desirable properties for electrocatalysts that lower the overpotential required for electrochemical reactions, such as the hydrogen evolution reaction (HER), in this study. In the presence of polyoxometalate (POM) and triblock copolymer pluronic (P123) as a hybrid soft template, the hydrothermal sulfurization of nickel foam leads to the formation of a hollow microsphere, assembled from the Ni 3 S 2 motif. Sonication for preparing POM+P123 hybrids, while adjusting the POM content, is an effective strategy for synthesizing a Pt-like electrocatalyst with excellent hydrogen evolution efficiency. The reason is that both sonication and optimal POM content can simultaneously enhance the electroactive surface area and electron transfer of the Ni 3 S 2 electrocatalyst. Adopting the optimal conditions, the three-dimensional porous network, composed of Ni 3 S 2 hollow microspheres on the nickel foam, shows that the HER in an alkaline medium requires only 77 mV overpotential for a current density of 10 mA cm -2 , with a robust long-term stability during a 25 h test. The performance at a large current density outperforms the current benchmark electrocatalyst (Pt) for HER.

  4. Influence of aging time on thermodynamical, structural and microstructural properties of Pd{sub 100-(x+y)}Pt{sub x}Rh{sub y-}T{sub 2}(D{sub 2}) systems; Influence de la duree de stockage sur les proprietes thermodynamiques, structurales et microstructurales des systemes Pd{sub 100-(x+y)}Pt{sub x}Rh{sub y-}T{sub 2}(D{sub 2})

    Energy Technology Data Exchange (ETDEWEB)

    Thiebaut, S

    1998-12-31

    This study has demonstrated that substitution of palladium by a few atomic percent of platinum and/or rhodium induces great changes in tritium storage properties and aging phenomena in these systems. Before aging, equilibrium pressures only depend of the global substitution rate, and not at all of the substituents nature. During storage, the decrease of plateau pressures is stronger in Pd-Pt alloys, and even more in the ternary solid solution Pd{sub 90}Pt{sub 5}Rh{sub 5}. This substitution effect was explained by a difference in the nature of defects created by {sup 3}He bubbles formation. The presence of platinum, with or without rhodium, in the lattice stabilizes self interstitial atoms isolated or in dislocation loops. These defects induce a great lattice swelling, and the tritides stability is directly proportional to the metal lattice volume. On the contrary, in pure palladium and Pd-Rh alloys, self interstitial atoms are preferentially integrated in a dislocation network, so they are without effect on the lattice parameter and consequently on the tritides stability. In all cases, Pd-Pt-Rh systems are indeed perfectly suited for tritium storage thanks to their conservation of local order and thermodynamical properties during aging. (author) 81 refs.

  5. Comparative analysis of termoscale effects, isomerization and stability of TM-nanoclusters (Pd,Ni,Fe and Si in dependence on interatomic potentials. MD-simulations

    Directory of Open Access Journals (Sweden)

    Galashev А.Е.

    2011-05-01

    Full Text Available Basing on the MD-simulated data the comparison of physicochemical properties of TM-nanoclusters (Pd,Ni,Fe, and Si-nanoparticles has been carried on in the purpose to understand the specificity of structure changes in depending on nature of interatomic bonds and initial structures (fcc, bcc, icosahedral – Ih. MDsimulation of thermic evolution including melting of TM- and Si- clusters was carried on up to 2000K.

  6. The development of specific heat and electrical resistivity in the CeNi.sub.x./sub.Pd.sub.1-x./sub.In series

    Czech Academy of Sciences Publication Activity Database

    Klicpera, M.; Javorský, P.; Šantavá, Eva

    2013-01-01

    Roč. 25, č. 24 (2013), "245501-1"-"245501-8" ISSN 0953-8984 R&D Projects: GA ČR GA202/09/1027 Institutional support: RVO:68378271 Keywords : Fermi-liquid behavior * low-tempperature and electronic properties * CeNiIn * Ce * CePdIn * pressure * disorder * alloys Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.223, year: 2013

  7. Influence of material and testing parameters on the lifetime of TBC systems with MCrAlY and NiPtAl bondcoats

    Energy Technology Data Exchange (ETDEWEB)

    Song, Peng

    2012-08-31

    The oxidation behavior of the bond coat is an important factor determining the lifetime of thermal barrier coatings (TBC) in the advanced gas turbine components. In the present work, the effect of various testing parameters, such as hot/cold dwell time, heating/cooling rate, atmosphere composition on the bondcoat oxidation and associated TBC lifetime has been investigated. The range of coating systems included Electron Beam - Physical Vapor Deposited (EB-PVD) and Air Plasma Sprayed (APS) TBC's with MCrAlY (M = Ni, Co) and NiPtAl-bondcoats of various compositions. The effect of the testing parameters strongly depended on the type and properties of the studied system. The lifetime of EB-PVD TBC systems with conventional MCrAlY and NiPtAl bondcoats forming uniform, flat alumina scales was found to be limited by critical scale thickness, upon which a rapid crack propagation at the scale/bondcoat interface results in macroscopic failure. The lifetime of such systems was found to be affected by factors, which influence the scale growth rate and adherence (in particular by oxygen partial pressure (pO{sub 2}) and water vapor content in the test gas in the case of MCrAlY), whereas the temperature cyclic frequency showed no significant effect. NiPtAl bondcoats showed a superior behavior than the conventional MCrAlY-bondcoats due to slower scale growth rate and better scale adherence. For EB-PVD TBC systems with Zr-doped MCrAlYbondcoats the lifetime is mainly determined by the crack growth rate in the inhomogeneous inwardly growing oxide scales, whereas the lifetime is not dependent on the pO{sub 2} but rather on the cyclic frequency. For APS TBC systems the bondcoat oxidation is only one of several factors determining the ceramic topcoat lifetime. Therefore the oxide scale adherence is of less importance for lifetime of APS TBCs as compared to EBPVD TBCs. For the former systems, the cracks initiated at the convex asperities of the rough oxide scale / bondcoat interface

  8. X-ray determination of site occupation parameters in ordered ternaries Cu(AuxM1-x)M = Ni,Pd

    International Nuclear Information System (INIS)

    Kumar, R.; Sparks, C.J.; Specht, E.D.; Zschack, P.; Ice, G.E.; Shiraishi, T.; Hisatsune, K.

    1990-01-01

    X-ray scattering data obtained for multiple wavelengths with synchrotron radiation were analyzed by the Rietveld method to determine Ni and Pd distributions on the Cu(000) and Au(1/2 1/2 1/2) sites in the CuAuI tetragonal P4/mmm structure. Alloys of CuAu x M 1-x containing 6 at. % Ni or 10 and 25 at. % Pd were processed to obtain maximum ordering. Nickel is predominantly found on the Cu size and most all the Pd is found on the Au site. The uncertainty in site occupation parameters is discussed for various contributions which affect powder intensity measurements. For highly absorbing materials, an observed powder roughness effect decreases the low angle (2θ) intensities relative to the high 2θ intensities. This effect reduces the reliability of the thermal parameters and obscure a proper description of the thermal motion of the two sublattices. Corrections to the X-ray intensity data for surface roughness/porosity effects reduce uncertainties to about ±1 at. % on the refined value of the site occupations. This use of variable wavelength X-rays with simultaneous refinement of the corresponding data is capable of distinguishing site occupations even between two elements of almost equal scattering factor as, for example, Cu and Ni atoms in this investigation. Chemical phase stability is related to the site occupation parameters. 9 refs., 3 figs., 2 tabs

  9. Copolymerization of ethylene with polar monomers: chain propagation and side reactions. A DFT theoretical study using zwitterionic Ni(II) and Pd(II) catalysts.

    Science.gov (United States)

    Szabo, Miklos J; Galea, Natasha M; Michalak, Artur; Yang, Sheng-Yong; Groux, Laurent F; Piers, Warren E; Ziegler, Tom

    2005-10-26

    Calculations utilizing anionic substituted derivates of the cationic N(wedge)N--Ni(II) and Pd(II) diimine Brookhart complex have been carried out on the barriers of ethylene and acrylonitrile insertion into a M- methyl, propyl and CH(CN)Et bond for M = Ni, Pd. The possibility of side reactions such as chelate formation with the polar functionality and oligomerization of the active species after acrylonitrile insertion are explored. The diimine ring system N--N = -NR' 'CR(1)CR(2)NR' ' with R' ' = 2,6-C(6)H(3)(i-Pr)(2) and R(1),R(2) = Me was functionalized by adding one or two anionic groups (BF(3)(-), etc.) in place of i-Pr on the aryl rings or by replacing one Me diimine backbone group (R(1)) with BH(3)(-). The objective of this investigation is computationally to design catalysts for ethylene/acrylonitrile copolymerization that have activities that are comparable to that of the cationic Ni(II) diimine or at least the Pd(II) diimine Brookhart system for ethylene homopolymerization. Complexes that might meet this objective are discussed.

  10. Ultrafast electronic and vibrational relaxations in mixed-ligand dithione-dithiolato Ni, Pd, and Pt complexes

    Czech Academy of Sciences Publication Activity Database

    Frei, F.; Rondi, A.; Espa, D.; Mercuri, M. L.; Pilia, L.; Serpe, A.; Odeh, A.; van Mourik, F.; Chergui, M.; Feurer, T.; Deplano, P.; Vlček, Antonín; Cannizzo, A.

    2014-01-01

    Roč. 43, č. 47 (2014), s. 17666-17676 ISSN 1477-9226 R&D Projects: GA MŠk LD14129 Institutional support: RVO:61388955 Keywords : 2ND-ORDER NLO PROPERTIES * SENSITIZED SOLAR-CELLS * FEMTOSECOND FLUORESCENCE Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 4.197, year: 2014

  11. Oxygen reduction reaction on a highly-alloyed Pt-Ni supported carbon electrocatalyst in acid solution

    CSIR Research Space (South Africa)

    Zheng, H

    2010-08-31

    Full Text Available of these electrocatalysts during the ORR was attributed to a composition effect, disordered stucture and low activity for methanol oxidation reaction. Most Pt alloy electrocatalysts were prepared via a complex procedure or by high temeperature thermal reduction...

  12. Pd-Pt Catalysts on Mesoporous SiO2-Al2O3 with Superior Activity for HDS of 4,6-Dimethyldibenzothiophene: Effect of Metal Loading and Support Composition

    Czech Academy of Sciences Publication Activity Database

    Vít, Zdeněk; Gulková, Daniela; Kaluža, Luděk; Kupčík, Jaroslav

    2015-01-01

    Roč. 179, DEC 2015 (2015), s. 44-53 ISSN 0926-3373 R&D Projects: GA ČR GAP106/11/0902 Institutional support: RVO:67985858 ; RVO:61388980 Keywords : Pd-Pt catalyst * mesoporous silica-alumina * 4,6-DMDBT Subject RIV: CF - Physical ; Theoretical Chemistry ; CA - Inorganic Chemistry (UACH-T) Impact factor: 8.328, year: 2015

  13. In situ attenuated total reflection infrared (ATR-IR) study of the adsorption of NO2-, NH2OH, and NH4+ on Pd/Al2O3 and Pt/Al2O3.

    NARCIS (Netherlands)

    Ebbesen, S.D.; Mojet, Barbara; Lefferts, Leonardus

    2008-01-01

    In relation to the heterogeneous hydrogenation of nitrite, adsorption of NO2-, NH4+, and NH2OH from the aqueous phase was examined on Pt/Al2O3, Pd/Al2O3, and Al2O3. None of the investigated inorganic nitrogen compounds adsorb on alumina at conditions presented in this study. NO2-(aq) and NH4+(aq) on

  14. Size-dependent effects in supported highly dispersed Fe{sub 2}O{sub 3} catalysts, doped with Pt and Pd

    Energy Technology Data Exchange (ETDEWEB)

    Cherkezova-Zheleva, Zara; Shopska, Maya, E-mail: shopska@ic.bas.bg; Mitov, Ivan; Kadinov, Georgi [Bulgarian Academy of Sciences, Institute of Catalysis (Bulgaria)

    2010-06-15

    Series of Fe and Fe-Me (Me = Pt or Pd) catalyst supported on {gamma}-Al{sub 2}O{sub 3}, TiO{sub 2} (anatase) or diatomite were prepared by the incipient wetness impregnation method. The metal loading was 8 wt.% Fe and 0.7 wt.% noble metal. The preparation and pretreatment conditions of all studied samples were kept to be the same. X-ray diffraction, Moessbauer spectroscopy, X-ray photoelectron spectroscopy and temperature-programmed reduction are used for characterization of the supports and the samples at different steps during their treatment and catalytic tests. The catalytic activity of the samples was tested in the reaction of total benzene oxidation. The physicochemical and catalytic properties of the obtained materials are compared with respect of the different chemical composition, dispersion of used carriers and of the supported phases. Samples with the same composition prepared by mechanical mixing are studied as catalysts for comparison and for clearing up the presence of size-dependent effect, also.

  15. Developing an aqueous approach for synthesizing Au and M@Au (M = Pd, CuPt) hybrid nanostars with plasmonic properties

    Science.gov (United States)

    Du, Jingshan; Yu, Junjie; Xiong, Yalin; Lin, Zhuoqing; Zhang, Hui; Yang, Deren

    Anisotropic Au nanoparticles show unique localized surface plasmon resonance (LSPR) properties, which make it attractive in optical, sensing, and biomedical applications. In this contribution, we report a general and facile strategy towards aqueous synthesis of Au and M@Au (M = Pd, CuPt) hybrid nanostars by reducing HAuCl4 with ethanolamine in the presence of cetyltrimethylammonium bromide (CTAB). According to electron microscopic observation and spectral monitoring, we found that the layered epitaxial growth mode (i.e., Frank-van der Merwe mechanism) contributes to the enlargement of the core, while, the random attachment of Au nanoclusters onto the cores accounts for the formation of the branches. Both of them are indispensable for the formation of the nanostars. The LSPR properties of the Au nanoparticles have been well investigated with morphology control via precursor amount and growth temperature. The Au nanostars showed improved surface-enhanced Raman spectroscopy (SERS) performance for rhodamine 6G due to their sharp edges and tips, which were therefore confirmed as good SERS substrate to detect trace amount of molecules.

  16. Pd-Ag Membrane Coupled to a Two-Zone Fluidized Bed Reactor (TZFBR) for Propane Dehydrogenation on a Pt-Sn/MgAl2O4 Catalyst.

    Science.gov (United States)

    Medrano, José-Antonio; Julián, Ignacio; Herguido, Javier; Menéndez, Miguel

    2013-05-14

    Several reactor configurations have been tested for catalytic propane dehydrogenation employing Pt-Sn/MgAl2O4 as a catalyst. Pd-Ag alloy membranes coupled to the multifunctional Two-Zone Fluidized Bed Reactor (TZFBR) provide an improvement in propane conversion by hydrogen removal from the reaction bed through the inorganic membrane in addition to in situ catalyst regeneration. Twofold process intensification is thereby achieved when compared to the use of traditional fluidized bed reactors (FBR), where coke formation and thermodynamic equilibrium represent important process limitations. Experiments were carried out at 500-575 °C and with catalyst mass to molar flow of fed propane ratios between 15.1 and 35.2 g min mmol-1, employing three different reactor configurations: FBR, TZFBR and TZFBR + Membrane (TZFBR + MB). The results in the FBR showed catalyst deactivation, which was faster at high temperatures. In contrast, by employing the TZFBR with the optimum regenerative agent flow (diluted oxygen), the process activity was sustained throughout the time on stream. The TZFBR + MB showed promising results in catalytic propane dehydrogenation, displacing the reaction towards higher propylene production and giving the best results among the different reactor configurations studied. Furthermore, the results obtained in this study were better than those reported on conventional reactors.

  17. Pd-Ag Membrane Coupled to a Two-Zone Fluidized Bed Reactor (TZFBR for Propane Dehydrogenation on a Pt-Sn/MgAl2O4 Catalyst

    Directory of Open Access Journals (Sweden)

    Miguel Menéndez

    2013-05-01

    Full Text Available Several reactor configurations have been tested for catalytic propane dehydrogenation employing Pt-Sn/MgAl2O4 as a catalyst. Pd-Ag alloy membranes coupled to the multifunctional Two-Zone Fluidized Bed Reactor (TZFBR provide an improvement in propane conversion by hydrogen removal from the reaction bed through the inorganic membrane in addition to in situ catalyst regeneration. Twofold process intensification is thereby achieved when compared to the use of traditional fluidized bed reactors (FBR, where coke formation and thermodynamic equilibrium represent important process limitations. Experiments were carried out at 500–575 °C and with catalyst mass to molar flow of fed propane ratios between 15.1 and 35.2 g min mmol−1, employing three different reactor configurations: FBR, TZFBR and TZFBR + Membrane (TZFBR + MB. The results in the FBR showed catalyst deactivation, which was faster at high temperatures. In contrast, by employing the TZFBR with the optimum regenerative agent flow (diluted oxygen, the process activity was sustained throughout the time on stream. The TZFBR + MB showed promising results in catalytic propane dehydrogenation, displacing the reaction towards higher propylene production and giving the best results among the different reactor configurations studied. Furthermore, the results obtained in this study were better than those reported on conventional reactors.

  18. Sum frequency generation vibrational spectroscopy of 1,3-butadiene hydrogenation on 4 nm Pt@SiO2, Pd@SiO2, and Rh@SiO2 core-shell catalysts.

    Science.gov (United States)

    Krier, James M; Michalak, William D; Cai, Xiaojun; Carl, Lindsay; Komvopoulos, Kyriakos; Somorjai, Gabor A

    2015-01-14

    1,3-Butadiene (1,3-BD) hydrogenation was performed on 4 nm Pt, Pd, and Rh nanoparticles (NPs) encapsulated in SiO2 shells at 20, 60, and 100 °C. The core-shells were grown around polyvinylpyrrolidone (PVP) coated NPs (Stöber encapsulation) prepared by colloidal synthesis. Sum frequency generation (SFG) vibrational spectroscopy was performed to correlate surface intermediates observed in situ with reaction selectivity. It is shown that calcination is effective in removing PVP, and the SFG signal can be generated from the metal surface. Using SFG, it is possible to compare the surface vibrational spectrum of Pt@SiO2 (1,3-BD is hydrogenated through multiple paths and produces butane, 1-butene, and cis/trans-2-butene) to Pd@SiO2 (1,3-BD favors one path and produces 1-butene and cis/trans-2-butene). In contrast to Pt@SiO2 and Pd@SiO2, SFG and kinetic experiments of Rh@SiO2 show a permanent accumulation of organic material.

  19. Sum Frequency Generation Vibrational Spectroscopy of 1,3-Butadiene Hydrogenation on 4 nm Pt@SiO 2 , Pd@SiO 2 , and Rh@SiO 2 Core–Shell Catalysts

    KAUST Repository

    Krier, James M.

    2015-01-14

    © 2014 American Chemical Society. 1,3-Butadiene (1,3-BD) hydrogenation was performed on 4 nm Pt, Pd, and Rh nanoparticles (NPs) encapsulated in SiO2 shells at 20, 60, and 100 °C. The core-shells were grown around polyvinylpyrrolidone (PVP) coated NPs (Stöber encapsulation) prepared by colloidal synthesis. Sum frequency generation (SFG) vibrational spectroscopy was performed to correlate surface intermediates observed in situ with reaction selectivity. It is shown that calcination is effective in removing PVP, and the SFG signal can be generated from the metal surface. Using SFG, it is possible to compare the surface vibrational spectrum of Pt@SiO2 (1,3-BD is hydrogenated through multiple paths and produces butane, 1-butene, and cis/trans-2-butene) to Pd@SiO2 (1,3-BD favors one path and produces 1-butene and cis/trans-2-butene). In contrast to Pt@SiO2 and Pd@SiO2, SFG and kinetic experiments of Rh@SiO2 show a permanent accumulation of organic material.

  20. Effects of Palladium Content, Quaternary Alloying, and Thermomechanical Processing on the Behavior of Ni-Ti-Pd Shape Memory Alloys for Actuator Applications

    Science.gov (United States)

    Bigelow, Glen

    2008-01-01

    The need for compact, solid-state actuation systems for use in the aerospace, automotive, and other transportation industries is currently driving research in high-temperature shape memory alloys (HTSMA) having transformation temperatures above 100 C. One of the basic high temperature systems under investigation to fill this need is NiTiPd. Prior work on this alloy system has focused on phase transformations and respective temperatures, no-load shape memory behavior (strain recovery), and tensile behavior for selected alloys. In addition, a few tests have been done to determine the effect of boron additions and thermomechanical treatment on the aforementioned properties. The main properties that affect the performance of a solid state actuator, namely work output, transformation strain, and permanent deformation during thermal cycling under load have mainly been neglected. There is also no consistent data representing the mechanical behavior of this alloy system over a broad range of compositions. For this thesis, ternary NiTiPd alloys containing 15 to 46 at.% palladium were processed and the transformation temperatures, basic tensile properties, and work characteristics determined. However, testing reveals that at higher levels of alloying addition, the benefit of increased transformation temperature begins to be offset by lowered work output and permanent deformation or "walking" of the alloy during thermal cycling under load. In response to this dilemma, NiTiPd alloys have been further alloyed with gold, platinum, and hafnium additions to solid solution strengthen the martensite and parent austenite phases in order to improve the thermomechanical behavior of these materials. The tensile properties, work behavior, and dimensional stability during repeated thermal cycling under load for the ternary and quaternary alloys were compared and discussed. In addition, the benefits of more advanced thermomechanical processing or training on the dimensional stability of

  1. The influence of alizarin and fluorescein on the photoactivity of Ni, Pt and Ru-doped TiO2 layers

    International Nuclear Information System (INIS)

    Rosu, Marcela-Corina; Suciu, Ramona-Crina; Lazar, Mihaela D.; Bratu, I.

    2013-01-01

    Highlights: ► The Ni, Pt, Ru-doped TiO 2 materials and sensitized with alizarin and fluorescein dyes were prepared by wet chemical route. ► The samples were characterized by: UV–vis spectroscopy, spectrofluorimetry, FT/IR spectroscopy and microscopy, X-ray diffraction and N 2 physisorption measurements. ► A combined influence of the dopants and dyes was observed, leading to a beneficial effect to TiO 2 photoactivity. -- Abstract: The doping with different metal ions and sensitization with organic compounds are two well known methods used to improve the photoactivity of TiO 2 . In this respect, the metallic ions-doped TiO 2 samples were prepared by embedding Ni, Pt and Ru ions into TiO 2 crystalline network and then, each sample was sensitized with alizarin and fluorescein dyes. The qualitative evaluation of prepared TiO 2 -based materials was made by: UV–vis spectroscopy, spectrofluorimetry, FT/IR spectroscopy and microscopy, X-ray diffraction and N 2 physisorption measurements. The optoelectronic properties investigated by UV–vis spectroscopy show that the optical response of Ni-doped TiO 2 layer shifts to visible. The X-ray spectra do not show peaks of nickel, platinum and ruthenium oxide crystals or pure metals. The FT/IR spectra proved the presence of dye molecules adsorbed on titania nanoparticles surface. These results demonstrated that the studied dopants and dyes have potential to promote modified TiO 2 -based materials as good candidates to be used in photolectrocatalytic processes

  2. Enhanced LPG response characteristics of SnO2 thin film based sensors loaded with Pt clusters

    OpenAIRE

    Haridas, Divya; Chowdhuri, Arijit; Sreenivas, K.; Gupta, Vinay

    2017-01-01

    RF sputtered SnO2 thin films (90 nm thick) loaded with clusters of nanoscale (8 nm) metal catalysts (Pt, Ag, Ni, Pb, Al, Pd) are investigated for LPG detection. SnO2 film loaded with Pt catalyst clusters exhibits enhanced response (~ 7.5×102) to 200 ppm of LPG at a relatively low operating temperature (185oC) with a fast response time of 100s. Variation of thickness of Pt clusters in the nanoscale range (2 to 20 nm) is seen to significantly influence the sensor response characteristics. Enhan...

  3. Designed synthesis of MOx(M = Zn, Fe, Sn, Ni, Mn, Co, Ce, Mg, Ag), Pt, and Au nanoparticles supported on hierarchical CuO hollow structures.

    Science.gov (United States)

    Zhang, Zailei; Jung, Ji Chul; Yan, Ning

    2016-12-01

    Despite intensive research into support substrates for the dispersal of nanoparticles and their applications, there has been a lack of general methods to produce metal oxide hollow substrates supporting a wide range of metal and metal oxides. Herein, a synthetic protocol for the preparation of CuO hollow structure-supported MO x (M = Zn, Fe, Ni, Sn, Mn, Co, Ce, Mg, and Ag) and noble metals (Pt and Au) with the desired properties and shell structure, such as CuO/Fe 2 O 3 , CuO/ZnO, CuO/SnO 2 , CuO/MgO, CuO/NiO, CuO/Mn 2 O 3 , CuO/CoO, CuO/CeO 2 , CuO/Ag 2 O, CuO/Pt, CuO/Au hollow cubes, CuO/ZnO double-shell hollow cubes, CuO/SnO 2 double-shell hollow octahedra, CuO/SnO 2 /Fe 2 O 3 and CuO/Mn 2 O 3 /NiO double-shell hollow cubes, was developed based on controlled calcination and etching. These hybrid hollow structures were employed not only as support substrates but also as active constituents for catalytic reactions. As an example, we demonstrated that CuO/ZnO hollow cubes are remarkably efficient in converting solid chitin biomass to liquid chemicals in methanol. In addition, CuO/ZnO double-shell hollow cubes were highly effective in the oxidation of benzyl alcohol in the presence of H 2 O 2 , whereas CuO/Pt and CuO/Au hollow cubes promoted the oxidation of benzyl alcohol in pure O 2 . The strategy developed in this work extends the controllable fabrication of high-quality CuO hollow structure-supported nanoparticles using various compositions and shell structures, paving the way to the exploration and systematic comparison of these materials in a wider range of applications.

  4. Effects of single metal atom (Pt, Pd, Rh and Ru) adsorption on the photocatalytic properties of anatase TiO2

    Science.gov (United States)

    Jin, Cui; Dai, Ying; Wei, Wei; Ma, Xiangchao; Li, Mengmeng; Huang, Baibiao

    2017-12-01

    The effects of single metal atom (Pt, Pd, Rh and Ru) adsorption on the photocatalytic properties of anatase TiO2 are investigated by means of the first-principles calculations based on density functional theory (DFT). Our results show that the most stable adsorption site for single metal atom on anatase TiO2 (101) surface is the bridge site formed by two twofold coordinated oxygen (O2c) atoms at the step edge. Due to the charge transfer from metal atoms to anatase TiO2 (101) surface, the work function of adsorbed surface is significantly smaller than the clean one, indicating enhanced surface activity. Fukui functions are highly localized around the isolated metal atoms, indicating that single metal atoms on anatase TiO2 (101) surface serve as the active reduction and oxidation sites in the photocatalytic process. Photo-induced electrons in the electronically excited TiO2 photocatalyst can be transferred to target species through the deposited single atoms. The band structures of host TiO2 are almost unchanged upon the adsorption, and the metal induced states are located in the band gap of the host. Remarkably, due to the metal atoms adsorption, the upward shift of conduction band edge will improve the reducing capacity of anatase TiO2. Moreover, when single metal atoms are adsorbed, potential energy of topmost surface Ti atoms turns to get close to the vacuum level, which significantly facilitates the electron transfer for hydrogen evolution. Results in this work provide new insights into improving the photocatalytic performance by single metal atoms adsorption.

  5. Chemistry and petrology of Fe-Ni beads from different types of cosmic spherules: Implication for precursors

    Digital Repository Service at National Institute of Oceanography (India)

    Rudraswami, N.G.; ShyamPrasad, M.; Babu, E.V.S.S.K.; VijayaKumar, T.

    and their refractory metal element (RME: Re, Os, W, Ir, Ru, Mo, Pt, Rh including Pd) compositions can help ascertain their precursor meteorites. We measured RME compositions of 55 Fe–Ni beads using LA-ICP-MS in all three basic types of cosmic spherules selected after...

  6. The role of MFM signal in mark size measurement in probe-based magnetic recording on CoNi/Pt multilayers

    International Nuclear Information System (INIS)

    Zhang Li; Bain, James A.; Zhu Jiangang; Abelmann, Leon; Onoue, Takahiro

    2007-01-01

    A method of heat-assisted magnetic recording (HAMR) potentially suitable for probe-based storage systems is characterized. Magnetic marks were formed by a scanning tunneling microscopy (STM)-based thermal magnetic mechanism on a perpendicular CoNi/Pt multilayered film. Magnetic force microscopy (MFM) was applied to display those marks. The MFM signal is dependent of the lift-height during MFM scanning: smaller lift-height leads to higher resolution of the MFM image and a double-peak signal line, while higher lift-height leads to lower resolution and a single-peak signal line. Theoretical calculation of the magnetic field from the mark was executed. It agrees well with experiments, and demonstrates the method of mark size measurement in perpendicular media: full-width half-maximum (FWHM) of the measured MFM signal

  7. New insight into electrochemical-induced synthesis of NiAl{sub 2}O{sub 4}/Al{sub 2}O{sub 3}: Synergistic effect of surface hydroxyl groups and magnetism for enhanced adsorptivity of Pd(II)

    Energy Technology Data Exchange (ETDEWEB)

    Salleh, N.F.M. [Department of Chemical Engineering, Faculty of Chemical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor (Malaysia); Jalil, A.A., E-mail: aishah@cheme.utm.my [Department of Chemical Engineering, Faculty of Chemical Engineering, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor (Malaysia); Centre of Hydrogen Energy, Institute of Future Energy, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor (Malaysia); Triwahyono, S. [Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor (Malaysia); Efendi, J. [Department of Chemistry, Universitas Negeri Padang, Jl. Prof. Hamka, Air Tawar, Padang, West Sumatera (Indonesia); Mukti, R.R. [Division of Inorganic and Physical Chemistry, Faculty of Mathematics and Natural Science, Institut Teknologi Bandung, Jl Ganesha No 10, Bandung 40132 (Indonesia); Hameed, B.H. [School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

    2015-09-15

    Graphical abstract: - Highlights: • The introduction of Ni to γ-Al{sub 2}O{sub 3} by electrolysis formed NiAl{sub 2}O{sub 4} spinels and NiO. • Physical mixed of NiO with γ-Al{sub 2}O{sub 3} only produced agglomerated NiO-Ni{sup 0}. • Ni/Al{sub 2}O{sub 3}-E has remarkably higher degree of magnetism than Ni/Al{sub 2}O{sub 3}-PM. • Ni/Al{sub 2}O{sub 3}-E adsorbed Pd{sup 2+} ions more effectively (q{sub m} = 40.3 mg/g) than Ni/Al{sub 2}O{sub 3}-PM. • Pd{sup 2+} ions were adsorbed to both samples via magnetic attraction and ion exchange. - Abstract: A new promising adsorbent, Ni supported on γ-Al{sub 2}O{sub 3} was prepared in a simple electrolysis system (Ni/Al{sub 2}O{sub 3}-E) in minutes and was compared with the sample prepared by a physical mixing method (Ni/Al{sub 2}O{sub 3}-PM). The adsorbents were characterized by XRD, TEM, FTIR, {sup 27}Al MAS NMR, XPS, and VSM. The results showed that besides NiO nanoparticles, a NiAl{sub 2}O{sub 4} spinel was also formed in Ni/Al{sub 2}O{sub 3}-E during the electrolysis via the dealumination and isomorphous substitution of Ni{sup 2+} ions. In contrast, only agglomerated NiO was found in the Ni/Al{sub 2}O{sub 3}-PM. Adsorption test on removal of Pd{sup 2+} ions from aqueous solution showed that the Pd{sup 2+} ions were exchanged with the hydrogen atoms of the surface–OH groups of both adsorbents. Significantly, the Ni/Al{sub 2}O{sub 3}-E demonstrated a higher adsorption towards Pd{sup 2+} ions than Ni/Al{sub 2}O{sub 3}-PM due to its remarkably higher degree of magnetism, which came from the NiAl{sub 2}O{sub 4}. The use of 0.1 g L{sup −1} Ni/Al{sub 2}O{sub 3}-E gave the maximum monolayer adsorption capacity (q{sub m}) of 40.3 mg g{sup −1} at 303 K and pH 5. The Ni/Al{sub 2}O{sub 3}-E showed high potential for simultaneous removal of various noble and transition metal ions and could be also used repetitively without affecting the high adsorptivity for Pd{sup 2+} ions. This work may provide promising

  8. Quantum, characterization and spectroscopic studies on Cu(II), Pd(II) and Pt(II) complexes of 1-(benzo[d]thiazol-2-yl)-3-phenylthiourea and its biological application as antimicrobial and antioxidant

    Science.gov (United States)

    Jambi, M. S.

    2017-09-01

    Divalent platinum, palladium and copper chelates of H2PhT have been isolated and identified. Their structures have been elucidated by partial elemental analyses, magnetic susceptibilities and spectroscopic estimations and additionally mass spectra. The FTIR and 1H NMR studies illustrated that H2PhT performs as mono-negative bi-dentate in Cu(II) and Pd(II) complexes while it behaves as neutral bi-dentate in both Pt(II) complexes. Both magnetic moments and spectral studies suggests a tetrahedral coordination geometry for [Cu(HPhT)(H2O)Cl] complex, a square planar geometry for both [Pd(HPhT)2] and [Pt(H2PhT)2Cl2] complexes and octahedral geometry for [Pt(H2PhT)2Cl2] complex. The molecular modeling are drawn and demonstrated both bond lengths and angles, chemical reactivity, MEP, NLO, Mulliken atomic charges, and binding energy (kcal/mol) for the investigated compounds. Theoretical infrared intensities and 1H NMR of H2PhT was computed utilizing DFT technique. An examination of the experimental and hypothetical spectra can be extremely valuable in making right assignments and analyzing the main chemical shift. DNA bioassay, antibacterial and antifungal activities of the investigated compounds have been determined.

  9. Pt and Pd catalysts supported on Al{sub 2}O{sub 3} modified with rare earth oxides in the hydrogenation of tetralin, in the presence of thiophene

    Energy Technology Data Exchange (ETDEWEB)

    Brandao, Denise Sousa; Galvao, Rosana Machado; Da Graca, Maria; Da Rocha, Martins Carneiro; Bargiela, Pascal; Sales, Emerson Andrade [Universidade Federal da Bahia - Instituto de Quimica. Rua Barao de Geremoabo, S/N, Campus Universitario de Ondina, CEP 40.170-290, Salvador-Bahia (Brazil)

    2008-04-15

    Due to stringent environmental regulations, the reduction of aromatic compounds present in diesel fuel, precursors of particulate matter, is becoming one of the most important technologies in petroleum refining industries. However, the high quantity of nitrogen and sulfur compounds limits the use of catalytic processes. In this work Pt and Pd catalysts supported on alumina modified with rare earth oxides (Ce and Pr) were prepared, characterized by XRF, XRD, UV-vis-DRS and XPS, and tested in the hydrogenation of tetralin reaction, in the presence of different concentrations of thiophene. The results showed that the use of a Pr-modified alumina support enhanced the tolerance of the Pt/Al{sub 2}O{sub 3} catalyst to thiophene. The addition of a second metal, Pd, despite a loss in activity, increased tolerance to this poison. The combination of both promoters exhibited a synergic effect, as the bimetallic catalyst supported in the Pr-modified alumina showed a very low sensitivity to thiophene, up to 2600 ppm, explained by the electron-deficiency of the metallic Pt. (author)

  10. Measurement of HONO, HNCO, and other inorganic acids by negative-ion proton-transfer chemical-ionization mass spectrometry (NI-PT-CIMS): application to biomass burning emissions

    Science.gov (United States)

    J. M. Roberts; P. Veres; C. Warneke; J. A. Neuman; R. A. Washenfelder; S. S. Brown; M. Baasandorj; J. B. Burkholder; I. R. Burling; T. J. Johnson; R. J. Yokelson; J. de Gouw

    2010-01-01

    A negative-ion proton transfer chemical ionization mass spectrometric technique (NI-PT-CIMS), using acetate as the reagent ion, was applied to the measurement of volatile inorganic acids of atmospheric interest: hydrochloric (HCl), nitrous (HONO), nitric 5 (HNO3), and isocyanic (HNCO) acids. Gas phase calibrations through the sampling inlet showed the method to be...

  11. Determining Recoverable and Irrecoverable Contributions to Accumulated Strain in a NiTiPd High-Temperature Shape Memory Alloy During Thermomechanical Cycling

    Science.gov (United States)

    Monroe, J. A.; Karaman, I.; Lagoudas, D. C.; Bigelow, G.; Noebe, R. D.; Padula, S., II

    2011-01-01

    When Ni(29.5)Ti(50.5)Pd30 shape memory alloy is thermally cycled under stress, significant strain can accumulate due to elasticity, remnant oriented martensite and plasticity. The strain due to remnant martensite can be recovered by further thermal cycling under 0 MPa until the original transformation-induced volume change and martensite coefficient of thermal expansion are obtained. Using this technique, it was determined that the 8.15% total accumulated strain after cycling under 200 MPa consisted of 0.38%, 3.97% and 3.87% for elasticity, remnant oriented martensite and creep/plasticity, respectively.

  12. Studies on Pd/NiFe2O4 catalyzed ligand-free Suzuki reaction in aqueous phase: synthesis of biaryls, terphenyls and polyaryls

    Directory of Open Access Journals (Sweden)

    Suresh B. Waghmode

    2011-03-01

    Full Text Available Palladium supported on nickel ferrite (Pd/NiF2O4 was found to be a highly active catalyst for the Suzuki coupling reaction between various aryl halides and arylboronic acids. The reaction gave excellent yields (70–98% under ligand free conditions in a 1:1 DMF/H2O solvent mixture, in short reaction times (10–60 min. The catalyst could be recovered easily by applying an external magnetic field. The polyaryls were similarly synthesized.

  13. Structural and microstructural comparative analysis on metallic alloys of composition Cu{sub y%}-Ni{sub x%}-Me (Me = Sn, Cr, Al, Pt)

    Energy Technology Data Exchange (ETDEWEB)

    Marques, I.M.; Okazaki, A.K.; Silveira, C.R. da; Carvalhal, M.A.; Monteiro, W.A.; Carrio, J.A.G. [Physics Department, CCH, Presbyterian Mackenzie University, Materials Science and Technology Centre, Sao Paulo, SP (Brazil); Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)], e-mail: jgcarrio@mackenzie.br

    2010-07-01

    This work presents a comparative study of microstructural and electrical properties of polycrystalline material Cu-Ni alloys synthesized by conventional and powder metallurgy. A sample of Cu{sub 99,33%} Ni{sub 0,23%} Pt{sub 0,43%} was produced in electric furnace with voltaic arc and various samples containing Al, Sn and Cr as third element were produced by powder metallurgy. The microstructure of the samples was studied by optical microscopy, Vickers micro hardness and x rays powder diffraction. Their electrical conductivity was measured with a milliohmeter Agilent (HP) 4338B. Refinements of the crystalline structure of the samples were performed by the Rietveld method, using the refinement program GSAS. The refinement results and Fourier differences calculations indicate that the copper matrix structure presents not significant distortions by the used amounts of the other metal atoms. The refinement of non structural parameters allowed the micro-structural characterization. The dependence of the micro-structure with thermal and mechanical treatments is studied. (author)

  14. Trends in the magnetic properties of Fe, Co, and Ni clusters and monolayers on Ir(111), Pt(111), and Au(111)

    Science.gov (United States)

    Bornemann, S.; Šipr, O.; Mankovsky, S.; Polesya, S.; Staunton, J. B.; Wurth, W.; Ebert, H.; Minár, J.

    2012-09-01

    We present a detailed theoretical investigation on the magnetic properties of small single-layered Fe, Co, and Ni clusters deposited on Ir(111), Pt(111), and Au(111). For this, a fully relativistic ab initio scheme based on density functional theory has been used. We analyze the element, size, and geometry specific variations of the atomic magnetic moments and their mutual exchange interactions as well as the magnetic anisotropy energy in these systems. Our results show that the atomic spin magnetic moments in the Fe and Co clusters decrease almost linearly with increasing coordination number on all three substrates, while the corresponding orbital magnetic moments appear to be much more sensitive to the local atomic environment. The isotropic exchange interaction among the cluster atoms is always very strong for Fe and Co exceeding the values for bulk bcc Fe and hcp Co, whereas the anisotropic Dzyaloshinski-Moriya interaction is, in general, one or two orders of magnitude smaller when compared to the isotropic one. For the magnetic properties of Ni clusters, the magnetic properties can show quite a different behavior, and we find in this case a strong tendency towards noncollinear magnetism.

  15. Nonlinear elastic properties of bulk metallic glasses Zr52.5Ti5Cu17.9Ni14.6Al10 and Pd40Cu30Ni10P20

    International Nuclear Information System (INIS)

    Kobelev, N.P.; Kolyvanov, E.L.; Khonik, V.A.

    2005-01-01

    The influence of uniaxial compression on the propagation of ultrasonic vibrations in Zr 52.5 Ti 5 Cu 17.9 Ni 14.6 Al 10 and Pd 40 Cu 30 Ni 10 P 20 bulk metallic glasses produced by melt quenching at a rate of 100 K/s is investigated. Elastic deformation was realized by compression of the samples along their long axis up to strains of about 1 GPa. Deriving of major ratios used during the calculation of the third-order elastic moduli of the glasses is described in brief, the results of the calculations being provided. A qualitative agreement between the calculated results and available data on the influence of the uniform pressure on the sound wave propagation rate was obtained [ru

  16. SnO₂(β-Bi₂O₃)/Bi₂Sn₂O₇ nanohybrids doped with Pt and Pd nanoparticles: applications in visible light photocatalysis, electrical conductivity and dye-sensitized solar cells.

    Science.gov (United States)

    Khairy, M; Mohamed, Mohamed Mokhtar

    2015-09-07

    Bi2O3-SnO2 nanocomposites formed at a nominal molar ratio of 3 : 1 and loaded with Pd/Pt nanoparticles synthesized by a sol gel-hydrothermal method with the aid of a template were thoroughly characterized by X-ray diffraction, TEM-EDX, N2 sorptiometry, diffuse reflectance UV-Vis, FTIR, photoluminescence and electrical conductivity. It has been shown that Pd and Pt stimulate the existence of β-Bi2O3 and SnO2, respectively together with the key component Bi2Sn2O7. The photocatalytic results indicate that Pd/β-Bi2O3-Bi2Sn2O7 revealed a remarkable performance for the degradation of methylene blue (MB) dye as compared to the Pt/SnO2-Bi2Sn2O7 and Bi2O3-SnO2 samples in both the UV and visible regions. The enhanced photocatalytic activity of the Pd/β-Bi2O3-Bi2Sn2O7 nanocomposite is primarily attributed to the broad contact between the β-Bi2O3 and Bi2Sn2O7 phases, which indicates high mesoporosity and heterojunction structures resulting in separation efficacy between photo-induced electron-hole pairs. Specifically, the photosensitive β-Bi2O3 is easily excited and released electrons to be accepted by Bi2Sn2O7 and Pd that might be deposited in the interlayer between β-Bi2O3 and Bi2Sn2O7. The degradation mechanism of MB over Pd/β-Bi2O3-Bi2Sn2O7 in the visible region showed that the dye degradation proceeds through evolution of ˙O2(-) and ˙OH radicals as evaluated using photoluminescence and free radical trapping experiments. An insight into the electrical properties including the dielectric constant and impedance of the materials indicates that Pd/β-Bi2O3-Bi2Sn2O7 has the highest conductivity based on increasing the ionic transport and defects at the β-Bi2O3/Bi2Sn2O7 heterojunction. This material displayed an improved photocurrent response of a higher power conversion efficiency, exceeding that of Pt/SnO2-Bi2Sn2O7 and SnBi3 by 50% and 250%, respectively, in dye-sensitized solar cells. Picosecond-resolved photoluminescence (PL) and polarization gated PL

  17. Graphene-cobaltite-Pd hybrid materials for use as efficient bifunctional electrocatalysts in alkaline direct methanol fuel cells.

    Science.gov (United States)

    Sharma, Chandra Shekhar; Awasthi, Rahul; Singh, Ravindra Nath; Sinha, Akhoury Sudhir Kumar

    2013-12-14

    Hybrid materials comprising of Pd, MCo2O4 (where M = Mn, Co or Ni) and graphene have been prepared for use as efficient bifunctional electrocatalysts in alkaline direct methanol fuel cells. Structural and electrochemical characterizations were carried out using X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, chronoamperometry and cyclic, CO stripping, and linear sweep voltammetries. The study revealed that all the three hybrid materials are active for both methanol oxidation (MOR) and oxygen reduction (ORR) reactions in 1 M KOH. However, the Pd-MnCo2O4/GNS hybrid electrode exhibited the greatest MOR and ORR activities. This active hybrid electrode has also outstanding stability under both MOR and ORR conditions, while Pt- and other Pd-based catalysts undergo degradation under similar experimental conditions. The Pd-MnCo2O4/GNS hybrid catalyst exhibited superior ORR activity and stability compared to even Pt in alkaline solutions.

  18. Potential of Nickel (Ni Phytoremediation of Adaptive Species on Revegetation Land, PT Vale Indonesia (Tbk Pomalaa Site Kolaka Regency

    Directory of Open Access Journals (Sweden)

    Faisal Danu Tuheteru

    2017-12-01

    Full Text Available This research aimed to determinate the type of adaptive plant and its potential of phytoremediations on nickel revegetation land, PT. Vale Indonesia Tbk. Pomalaa site Kolaka Regency. The research was carried out in March - October 2016, with stages of explation and identification of adaptive plant species as well as analysis of nicel leaves and soil content using HNO3 or HClO4 method and (AAS Atomic Absorbtion Spectrophotometry test. 12 types of adaptive plants from 12 genera and 10 family. That grow naturally on nickel revegetation land PT. Vale Indonesia Tbk. site Pomalaa. Species from tree habitus thet freguently found, namely Gymnostoma sumatrana, Sarcotheca celebica, Parinaria corymbosa, Timonius celebicus, Weinnmania fraxinea, Alstonia macrophylla. Based on analysis result, there four species that was categorized as low acummulator Nepenthes maxima, Cheilanthes tenuifolia, Timonius celebicus, Sarcotheca celebica. The highest absorber is S. celebica with nickel content 595 mg/kg dry weight leaves. S. celebica potential to be developed as nickel phytoremedian.

  19. Electrocatalytic behavior of a nanocomposite of Ni/Pd supported by carbonized PVA nanofibers towards formic acid, ethanol and urea oxidation: A physicochemical and electro-analysis study

    Science.gov (United States)

    Mohamed, Ibrahim M. A.; Yasin, Ahmed S.; Barakat, Nasser A. M.; Song, Seung A.; Lee, Ha Eun; Kim, Seong Su

    2018-03-01

    A nanocomposite of Ni/Pd supported by carbonized poly-vinyl alcohol (PVA) nanofibers (NFs) was synthesized via electrospinning followed by calcination under an argon atmosphere. The as-synthesized NFs were studied using physicochemical analyses, such as field-emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTsbnd IR) and X-ray photoelectron spectroscopy (XPS), to investigate the morphology, crystallinity, effect of carbonization and surface chemistry of the NFs, respectively. Cyclic voltammetry (CV) and chronoamperometry (CA) were utilized to study the performance of the NFs towards electrooxidation reactions. The designed NFs present superior electrocatalytic behavior in an acid medium towards formic acid oxidation, as well as urea and ethanol oxidation in an alkaline medium. The electrocatalytic performance of the bimetallic NFs appears to arise from the assembly of bimetallic Ni/Pd@NFs based on PVA, which has hydroxyl groups. These hydroxyl groups can decrease the negative processes that occur as a result of metal-metal interactions, such as the aggregation process. This study introduces a novel non-precious electrocatalyst to facilitate the commercialization of fuel cells based on formic acid, urea and ethanol.

  20. Transition metal-centered trigonal prisms as building units in RE{sub 14}T{sub 3}In{sub 3} (RE = Y, Ho, Er, Tm, Lu; T = Pd, Ir, Pt) and Y{sub 4}IrIn

    Energy Technology Data Exchange (ETDEWEB)

    Zaremba, R.; Rodewald, U.C.; Poettgen, R. [Inst. fuer Anorganische und Analytische Chemie, Univ. Muenster (Germany)

    2007-12-15

    The indides RE{sub 14}T{sub 3}In{sub 3} (RE = Y, Ho, Er, Tm, Lu; T = Pd, Ir, Pt) and Y{sub 4}IrIn were synthesized from the elements by are-melting and subsequent annealing for crystal growth. Their structures were characterized on the basis of X-ray powder and single crystal data: Lu{sub 14}Co{sub 3}In{sub 3}-type, space group P4{sub 2}/nmc, a = 970.2(1), c = 2340.7(5) pm for Y{sub 13.95}Pd{sub 3}In{sub 3.05}, a = 959.7(1), c = 2309.0(5) pm for Ho{sub 14}Pd{sub 2.95}In{sub 3}, a = 955.5(1), c = 2305.1(5) pm for Er{sub 14}Pd{sub 3}In{sub 3}, a = 950.9(1), c = 2291.6(5) pm for Tm{sub 13.90}Pd{sub 3}In{sub 3.10}, a = 944.4(1), c = 2275.5(5) pm for Lu{sub 13.93}Pd{sub 3}In{sub 3.07}, a = 962.9(1), c = 2343.0(5) pm for Y{sub 13.86}Ir{sub 2.97}In{sub 3.02}, a = 967.6(1), c = 2347.8(5) pm for Y{sub 13.92}Pt{sub 3.05}In{sub 2.91}, and Gd{sub 4}RhIn-type, space group F anti 43m, a = 1368.6(2) pm for Y{sub 4}IrIn. The main structural motifs are transition metal-centered trigonal prisms of the rare Earth elements which are condensed to two-dimensional networks in the RE{sub 14}T{sub 3}In{sub 3} indides and to a three-dimensional one in Y{sub 4}IrIn. The indium atoms in both structure types show segregation in the metal-rich matrix, i.e. In{sub 2} dumbbells in the RE{sub 14}T{sub 3}In{sub 3} indides (309 pm In2-In2 in Y{sub 13.86}Ir{sub 2.97}In{sub 3.02}) and In{sub 4} tetrahedra (322 pm In-In) in Y{sub 4}IrIn. The crystal chemical peculiarities of both structure types are discussed. (orig.)

  1. Superstructure formation in PrNi{sub 2}Al{sub 3} and ErPd{sub 2}Al{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Eustermann, Fabian; Hoffmann, Rolf-Dieter [Muenster Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie; Janka, Oliver [Muenster Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie; Oldenburg Univ. (Germany). Inst. fuer Chemie

    2017-09-01

    The intermetallic phase ErPd{sub 2}Al{sub 3} was obtained by arc-melting of the elements and subsequent annealing for crystal growth. The sample was studied by X-ray diffraction on powders and single crystals. The structure of ErPd{sub 2}Al{sub 3} was refined from X-ray diffraction data and revealed a superstructure of PrNi{sub 2}Al{sub 3} - a CaCu{sub 5} derivative (P6/m, a=1414.3(1), c=418.87(3) pm wR=0.0820, 1060 F{sup 2} values, 48 variables). The same superstructure was subsequently found for PrNi{sub 2}Al{sub 3} (P6/m, a=1407.87(4), c=406.19(2) pm, wR=0.0499, 904 F{sup 2} values, 47 variables). In the crystal structure, the aluminium and transition metal atoms form a polyanionic network according to [T{sub 2}Al{sub 3}]{sup δ-}, while rare earth atoms fill cavities within the networks. They are coordinated by six transition metal and twelve aluminum atoms. In contrast to the PrNi{sub 2}Al{sub 3} type structure reported so far, two crystallographic independent rare-earth sites are found of which one (1b) is shifted by 1/2 z, causing a distortion in the structure along with a recoloring of the T and Al atoms in the network.

  2. Highly Active, Carbon-supported, PdSn Nano-core, Partially ...

    African Journals Online (AJOL)

    Carbon-supported, Pt partially covered, PdSn alloy nanoparticles (Pt-PdSn/C) were synthesized via a metathetical reaction of PdSn alloy nanoparticles, and a platinum precursor. The electrochemical activity was evaluated by methanol oxidation. The Pt-PdSn/C catalysts were characterized by transmission electron ...

  3. Effect of pH on the Nitrite Hydrogenation Mechanism over Pd/Al2O3 and Pt/Al2O3: Details Obtained with ATR-IR Spectroscopy

    DEFF Research Database (Denmark)

    Ebbesen, Sune Dalgaard; Mojet, Barbara L.; Lefferts, Leon

    2011-01-01

    It is well-known that activity and selectivity to N2 during nitrite hydrogenation over noble metal catalysts in water depend on the pH of the solution, but mechanistic understanding is lacking. Attenuated total reflection infrared (ATR-IR) spectroscopy is an ideal tool to perform detailed studies...... on catalytic surfaces in water. In this paper, the influence of pH was studied on adsorption and subsequent hydrogenation of nitrite in water between pH 5 and 9 over Pd/Al2O3 and Pt/Al2O3, using ATR-IR spectroscopy. On both catalysts, pH clearly influenced the surface coverage and reaction rates...... of intermediates. For Pt/Al2O3, lowering the pH induced the increasing surface coverage of key reaction intermediates like NOsteps1620cm−1 and “HNO”(ads)1540cm−1, as well as increased hydrogenation rates, explaining the higher TOF at lower pH as reported in the literature. For Pd/Al2O3, the effect of p...

  4. Concentrations of Platinum Group Elements (Pt, Pd, Rh in Airborne Particulate Matter (PM2.5 and PM10-2.5 Collected at Selected Canadian Urban Sites: a Case Study

    Directory of Open Access Journals (Sweden)

    Celo V.

    2013-04-01

    Full Text Available Increasing environmental concentrations of platinum group elements (PGEs, in particular platinum (Pt, palladium (Pd and rhodium (Rh, from catalytic converters has been reported worldwide. Initially it was believed that the emitted PGEs remain in the roadside environment, but recent studies have shown that fine PGE-containing particles can be transported and distributed at regional and long-range levels. Therefore, the monitoring of PGEs in airborne particulate matter (PM is important for the estimation of potential risks to human health and to the ecosystem. The aim of this study is to present the first results from an analysis on the concentration and distribution of Pt, Pd and Rh in PM collected on Teflon filters at two selected urban sites (Toronto, Ontario; Edmonton, Alberta collected within the Canadian National Air Pollution Surveillance (NAPS network. In this work, a quadruple inductively coupled plasma mass spectrometry (ICP-MS, combined with microwave assisted acid digestion using aqua regia was used. A cation exchange separation was used to alleviate the matrix-induced spectral and nonspectral interferences prior to ICP-MS analysis. To obtain sufficient material needed for PGEs analysis, fine PM (particles with aerodynamic diameter less than 2.5 mm; PM2.5 and coarse PM (with aerodynamic diameter between 2.5 and 10 mm; PM10-2.5 samples were combined into composite samples on a seasonal basis. The obtained results will be discussed and compared with literature data.

  5. Electrochemical performance and carbon deposition resistance of M-BaZr0.1Ce0.7Y0.1Yb0.1O3-δ (M = Pd, Cu, Ni or NiCu) anodes for solid oxide fuel cells

    Science.gov (United States)

    Li, Meng; Hua, Bin; Pu, Jian; Chi, Bo; Jian, Li

    2015-01-01

    Pd-, Cu-, Ni- and NiCu-BaZr0.1Ce0.7Y0.1Yb0.1O3-δ anodes, designated as M-BZCYYb, were prepared by impregnating M-containing solution into BZCYYb scaffold, and investigated in the aspects of electrocatalytic activity for the reactions of H2 and CH4 oxidation and the resistance to carbon deposition. Impregnation of Pd, Ni or NiCu significantly reduced both the ohmic (RΩ) and polarization (RP) losses of BZCYYb anode exposed to H2 or CH4, while Cu impregnation decreased only RΩ in H2 and the both in CH4. Pd-, Ni- and NiCu-BZCYYb anodes were resistant to carbon deposition in wet (3 mol. % H2O) CH4 at 750°C. Deposited carbon fibers were observed in Pd- and Ni-BZCYYb anodes exposed to dry CH4 at 750°C for 12 h, and not observed in NiCu-BZCYYb exposed to dry CH4 at 750°C for 24 h. The performance of a full cell with NiCu-BZCYYb anode, YSZ electrolyte and La0.6Sr0.4Co0.2Fe0.8O3-δ-Gd doped CeO2 (LSCF-GDC) cathode was stable at 750°C in wet CH4 for 130 h, indicating that NiCu-BZCYYb is a promising anode for direct CH4 solid oxide fuel cells (SOFCs). PMID:25563843

  6. Radiochemical neutron activation analysis for 36 elements in geological material: Au, Ag, Bi, Br, Cd, Cs, Ge, In, Ir, Ni, Os, Pd, Rb, Re, Sb, Se, Sn, Te, Tl, U, and Zn as well as Sc, Y, and REE

    Energy Technology Data Exchange (ETDEWEB)

    Anders, E; Wolf, R; Morgan, J W; Ebihara, M; Woodrow, A B; Janssens, M J; Hertogen, J

    1988-01-01

    In lunar and terrestrial rocks and in meteorites, the radiochemical neutron activation method decribed here enables determination of the 21 trace and ultratrace elements Ag, Au, Bi, Br, Cd, Cs, Ga, Ge, In, Ir, Ni, Os, Pd, Rb, Re, Sb, Se, Te, Tl, U, Zn, as well as 13 rare earth elements (REE), Sc and Y. Materials, techniques and procedures are discussed. 81 refs.

  7. Binary and tertiary reaction cross-sections of V, Cr, Mn, Fe, Ni, Cu, Zr, Nb, Mo, Ta, W, Pt and their isotopes

    International Nuclear Information System (INIS)

    Garg, S.B.

    1982-01-01

    Neutron induced binary and tertiary reaction cross-sections have been evaluated for V, Cr, Mn, Fe, Ni, Cu, Zr, Nb, Mo, Ta, W, Pt and their isotopes in the 'energy range 0.5 MeV to 20 MeV using the nuclear statistical empirical model. The reactions considered are (n,n'), (n,2n), (n,3n), (n,p), (n,d), (n,t), (n, 3 He), (n,α), (n,np), (n,nd), (n,nt), (n,n 3 He), (n,nα), (n,pn), (n,2p), (n,ν), (n,αp), (n,dn) and (n,pα). Most of the above mentioned elements are used as structural materials in nuclear reactors and the measured cross-section data for the above listed reactions are seldom available for the radiation damage and safety analysis. With a view to providing these data, this nuclear model based evaluation has been undertaken. The associated uncertainties in the cross-sections and their fission averages have also been evaluated. (author)

  8. Surface exploration of a room-temperature ionic liquid-chitin composite film decorated with electrochemically deposited PdFeNi trimetallic alloy nanoparticles by pattern recognition: an elegant approach to developing a novel biotin biosensor.

    Science.gov (United States)

    Gholivand, Mohammad-Bagher; Jalalvand, Ali R; Goicoechea, Hector C; Paimard, Giti; Skov, Thomas

    2015-01-01

    In this study, a novel biosensing system for the determination of biotin (BTN) based on electrodeposition of palladium-iron-nickel (PdFeNi) trimetallic alloy nanoparticles (NPs) onto a glassy carbon electrode (GCE) modified with a room-temperature ionic liquid (RTIL)-chitin (Ch) composite film (PdFeNi/ChRTIL/GCE) is established. NPs have a wide range of applications in science and technology and their sizes are often measured using transmission electron microscopy (TEM) or X-ray diffraction. Here, we used a pattern recognition method (digital image processing, DIP) for measuring particle size distributions (PSDs) from scanning electron microscopic (SEM) images in the presence of an uneven background. Different depositions were performed by varying the number of cyclic potential scans (N) during electroreduction step. It was observed that the physicochemical properties of the deposits were correlated to the performance of the PdFeNi/ChRTIL/GCE with respect to BTN assay. The best results were obtained for eight electrodeposition cyclic scans, where small-sized particles (19.54 ± 6.27 nm) with high density (682 particles µm(-2)) were obtained. Under optimized conditions, a linear range from 2.0 to 44.0 × 10(-9) mol L(-1) and a limit of detection (LOD) of 0.6 × 10(-9) mol L(-1) were obtained. The PdFeNi/ChRTIL nanocomposite showed excellent compatibility, enhanced electron transfer kinetics, large electroactive surface area, and was highly sensitive, selective, and stable toward BTN determination. Finally, the PdFeNi/ChRTIL/GCE was satisfactorily applied to the determination of BTN in infant milk powder, liver, and egg yolk samples. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. Effect of Thermomechanical Processing on the Microstructure, Properties, and Work Behavior of a Ti50.5 Ni29.5 Pt20 High-Temperature Shape Memory Alloy

    Science.gov (United States)

    Noebe, Ronald; Draper, Susan; Gaydosh, Darrell; Garga, Anita; Lerch, Brad; Penney, Nicholas; Begelow, Glen; Padula, Santo, II; Brown, Jeff

    2006-01-01

    TiNiPt shape memory alloys are particularly promising for use as solid state actuators in environments up to 300 C, due to a reasonable balance of properties, including acceptable work output. However, one of the challenges to commercializing a viable high-temperature shape memory alloy (HTSMA) is to establish the appropriate primary and secondary processing techniques for fabrication of the material in a required product form such as rod and wire. Consequently, a Ti(50.5)Ni(29.5)Pt20 alloy was processed using several techniques including single-pass high-temperature extrusion, multiple-pass high-temperature extrusion, and cold drawing to produce bar stock, thin rod, and fine wire, respectively. The effects of heat treatment on the hardness, grain size, room temperature tensile properties, and transformation temperatures of hot- and cold-worked material were examined. Basic tensile properties as a function of temperature and the strain-temperature response of the alloy under constant load, for the determination of work output, were also investigated for various forms of the Ti(50.5)Ni(29.5)Pt20 alloy, including fine wire.

  10. Fabrication and characterization of Pd/Cu doped ZnO/Si and Ni/Cu doped ZnO/Si Schottky diodes

    Energy Technology Data Exchange (ETDEWEB)

    Agarwal, Lucky; Singh, Brijesh Kumar; Tripathi, Shweta [Department of Electronics & Communication Engineering, Motilal Nehru National Institute of Technology, Allahabad 211004 (India); Chakrabarti, P., E-mail: pchakrabarti.ece@iitbhu.ac.in [Department of Electronics & Communication Engineering, Motilal Nehru National Institute of Technology, Allahabad 211004 (India); Department of Electronics Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005 (India)

    2016-08-01

    In this paper, fabrication and characterization of copper doped ZnO (Cu doped ZnO) based Schottky devices have been reported. Cu doped ZnO thin films have been deposited on p-Si (100) samples by the sol-gel spin coating method. X-Ray diffraction (XRD) and atomic force microscopy (AFM) studies have been done in order to evaluate the structural and morphological properties of the film. The optical properties of the film have been determined by using variable angle ellipsometry. Further, Seebeck measurement of the deposited Cu doped ZnO film leads to positive Seebeck coefficient confirming the p-type conductivity of the sample. The resistivity and acceptor concentration of the film has also been evaluated using four probe measurement system. Pd and Ni metals have been deposited on separate Cu doped ZnO thin film samples using low cost thermal evaporation method to form Schottky contacts. The electrical characterization of the Schottky diode has been performed by semiconductor device analyzer (SDA). Electrical parameters such as barrier height, ideality factor, reverse saturation current and rectification ratio have also been determined for the as-prepared Schottky diode using conventional thermionic emission model and Cheung's method. - Highlights: • Fabrication of sol-gel derived Cu doped ZnO (p-type) Schottky contact proposed. • The p-type Conductivity of the sample confirmed by Seebeck Measurement. • Pd and Ni deposited on Cu doped ZnO film to form Schottky contacts. • Cu doped ZnO expected to emerge as a potential material for thin film solar cells.

  11. Investigations of Pd-Cu electrocatalyst for oxygen reduction reaction in acidic media with RDE method

    Energy Technology Data Exchange (ETDEWEB)

    Fouda-Onana, F.; Bah, S.; Savadogo, O. [Ecole Polytechnique de Montreal, Montreal, PQ (Canada). Laboratoire de nouveaux materiaux pour l' energie et l' electrochimie

    2008-07-01

    The kinetics of the oxygen reduction reaction (ORR) has been studied extensively with different platinum bi-metallic alloys such as Pt-Fe, Pt-Ni, Pt-Co. However, palladium-based bi-metallic alloys are being considered as a substitute for platinum in electrocatalysts. This paper reported on a study that investigated the ORR on bi-metallic Pd-Cu electrocatalyst. Different contents in Cu were analyzed and an optimal Cu composition leading to the highest ORR activity was found. A mechanism of the ORR kinetics for this catalyst was introduced based on the value of the Tafel slope. A smooth increase in surface area up to 50 per cent Cu was observed to a constant value of 23 cm{sup 2}. Such behaviour was due to the high dispersion of Pd as Cu increased and segregated. A volcano-shape was found between the kinetic current, activation energy and the Cu composition. The maximum exchange current density and the lowest activation energy were found for Pd50Cu50, which corresponded to the highest surface area. All Pd-Cu alloys presented a higher kinetic current than Pd alone. 3 refs., 1 tab., 3 figs.

  12. The performance and stability of the oxygen reduction reaction on Pt-M (M = Pd, Ag and Au) nanorods: an experimental and computational study.

    Science.gov (United States)

    Liang, Yu-Ting; Lin, Syuan-Pei; Liu, Chen-Wei; Chung, Shu-Ru; Chen, Tsan-Yao; Wang, Jeng-Han; Wang, Kuan-Wen

    2015-04-18

    The ORR activity of Pt3M NRs is related to the oxophilicity (ΔE(ads)). However, their segregation energy when exposed to oxygen containing species (OCS*) determines their stability. Although the ΔE(ads) of Ag is not as weak as that of Au, its structure is relatively stable, thus promoting the ORR stability.

  13. Exohedral M–C{sub 60} and M{sub 2}–C{sub 60} (M = Pt, Pd) systems as tunable-gap building blocks for nanoarchitecture and nanocatalysis

    Energy Technology Data Exchange (ETDEWEB)

    Özdamar, Burak; Boero, Mauro, E-mail: mauro.boero@ipcms.unistra.fr; Massobrio, Carlo; Felder-Flesch, Delphine; Le Roux, Sébastien, E-mail: sebastien.leroux@ipcms.unistra.fr [Institut de Physique et Chimie des Matériaux de Strasbourg, University of Strasbourg and CNRS, UMR 7504, 23 Rue du Loess, BP43, F-67034 Strasbourg (France)

    2015-09-21

    Transition metal–fullerenes complexes with metal atoms bound on the external surface of C{sub 60} are promising building blocks for next-generation fuel cells and catalysts. Yet, at variance with endohedral M@C{sub 60}, they have received a limited attention. By resorting to first principles simulations, we elucidate structural and electronic properties for the Pd–C{sub 60}, Pt–C{sub 60}, PtPd–C{sub 60}, Pd{sub 2}–C{sub 60}, and Pt{sub 2}–C{sub 60} complexes. The most stable structures feature the metal atom located above a high electron density site, namely, the π bond between two adjacent hexagons (π-66 bond). When two metal atoms are added, the most stable configuration is those in which metal atoms still stand on π-66 bonds but tends to clusterize. The electronic structure, rationalized in terms of localized Wannier functions, provides a clear picture of the underlying interactions responsible for the stability or instability of the complexes, showing a strict relationship between structure and electronic gap.

  14. Pt(II) and Pd(II) complexes with ibuprofen hydrazide: Characterization, theoretical calculations, antibacterial and antitumor assays and studies of interaction with CT-DNA

    Science.gov (United States)

    Manzano, Carlos M.; Bergamini, Fernando R. G.; Lustri, Wilton R.; Ruiz, Ana Lúcia T. G.; de Oliveira, Ellen C. S.; Ribeiro, Marcos A.; Formiga, André L. B.; Corbi, Pedro P.

    2018-02-01

    Palladium(II) and platinum(II) complexes with a hydrazide derivative of ibuprofen (named HIB) were synthesized and characterized by chemical and spectroscopic methods. Elemental and thermogravimetric analyses, as well as ESI-QTOF-MS studies for both complexes, confirmed a 1:2:2 metal/HIB/Cl- molar ratio. The crystal structure of the palladium(II) complex was solved by single crystal X-ray diffractometric analysis, which permitted identifying the coordination formula [PdCl2(HIB)2]. Crystallographic studies also indicate coordination of HIB to the metal by the NH2 group. Nuclear magnetic resonance and infrared spectroscopies reinforced the coordination observed in the crystal structure and suggested that the platinum(II) complex presents similar coordination modes and structure when compared with the Pd(II) complex. The complexes had their structures optimized with the aid of DFT methods. In vitro antiproliferative assays showed that the [PdCl2(HIB)2] complex is active over ovarian cancer cell line OVCAR-03, while biophysical studies indicated its capacity to interact with CT-DNA. The complexes were inactive over Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa bacterial strains.

  15. Promotion effect of nanosized Pt, RuO2 and NiOx loading on visible light-driven photocatalysts K4Ce2M10O30 (M=Ta, Nb for hydrogen evolution from water decomposition

    Directory of Open Access Journals (Sweden)

    Mengkui Tian et al

    2007-01-01

    Full Text Available Metal oxide photocatalysts K4Ce2M10O30 (M=Ta, Nb capable of responding to visible light were synthesized by conventional high temperature solid-state reaction. The photocatalysts have an appropriate band gap energy ca. 1.8–2.3 eV and excellent chemical potential level to evolve H2 from aqueous solutions containing a sacrificial electron donor (Na2SO3 under visible light irradiation (λ>420 nm without any co-catalyst. When they were loading with Pt, RuO2 and NiOx, the activities for evolving H2 were prompted markedly. By SEM and TEM investigations, it can be seen that these loading metal and metal oxides are dispersed on the surface of photocatalysts K4Ce2M10O30 (M=Ta, Nb in diameter of about 10–30 nm particles, especially the NiOx loading even formed double layered structure with metal nickel (Ni and metal oxide (NiO. The reasons for the increasing activities after these loading may be attributable to facilitate electron migrating from the conduction band of K4Ce2M10O30 (M=Ta, Nb to the Pt, RuO2 and NiOx nanoparticles, which function as H2 production sites on the surface of catalysts. The same phenomenon appears on the solid solution K4Ce2Ta10−xNbxO30 (x=0–10 with loading RuO2.

  16. Preparation of (001)-Oriented CaBi4Ti4O15 and SrBi4Ti4O15 Films Using LaNiO3 Nucleation Layer on Pt-passivated Si Wafer

    Science.gov (United States)

    Mizutani, Yuki; Uchida, Hiroshi; Funakubo, Hiroshi; Koda, Seiichiro

    2009-09-01

    Thin films of CaBi4Ti4O15 and SrBi4Ti4O15 with preferential crystal orientation were prepared by the chemical solution deposition (CSD) technique on a (100)LaNiO3/(111)Pt/(100)Si substrate. The films consisted of a crystalline phase of bismuth-layer-structured dielectric (BLSDs). The (00l) planes of a BLSD crystal were preferentially oriented to the surface of the (100)LaNiO3/(111)Pt/(100)Si substrate, which is ascribed to the lattice matching between pseudo perovskite blocks in the BLSD crystal and the (100)LaNiO3 plane with a perovskite structure. Frequent heat treatment for crystallization, i.e., once after each coating, also enhanced the degree of crystallinity and crystal orientation of the BLSD films. The dielectric constants (ɛr) of SrBi4Ti4O15 and CaBi4Ti4O15 thin films were approximately 250 at room temperature. The ɛr values of both films increased with ambient temperature. The variations in capacitance in the temperature range from 25 to 200 °C were approximately 3 and 5% respectively, which were significantly smaller than that in the (Ba,Sr)TiO3 thin film.

  17. Pressure dependence of the elastic constants and vibrational anharmonicity of Pd sub 3 sub 9 Ni sub 1 sub 0 Cu sub 3 sub 0 P sub 2 sub 1 bulk metallic glass

    CERN Document Server

    Wang Li; Sun, L L; Wang, W H; Wang, W K

    2003-01-01

    The pressure dependence of the acoustic velocities of a Pd sub 3 sub 9 Ni sub 1 sub 0 Cu sub 3 sub 0 P sub 2 sub 1 bulk metallic glass have been investigated up to 0.5 GPa at room temperature with the pulse echo overlap method. Two independent second-order elastic coefficients C sub 1 sub 1 and C sub 4 sub 4 and their pressure derivatives are yielded. The vibrational anharmonicity is shown by calculating both the acoustic mode Grueneisen parameters in the long-wavelength limit and the thermal Grueneisen parameter, and this result is compared with that for the Pd sub 4 sub 0 Ni sub 4 sub 0 P sub 2 sub 0 bulk glass.

  18. Comparative Analysis of the Effects of Severe Plastic Deformation and Thermomechanical Training on the Functional Stability of Ti50.5Ni24.5Pd25 High-Temperature Shape Memory Alloy

    Science.gov (United States)

    Atli, K. C.; Karaman, I.; Noebe, R. D.; Maier, H. J.

    2010-01-01

    We compare the effectiveness of a conventional thermomechanical training procedure and severe plastic deformation via equal channel angular extrusion to achieve improved functional stability in a Ti50.5Ni24.5Pd25 high-temperature shape memory alloy. Thermomechanical testing indicates that both methods result in enhanced shape memory characteristics, such as reduced irrecoverable strain and thermal hyster