WorldWideScience

Sample records for newly developed software

  1. Application of newly developed Fluoro-QC software for image quality evaluation in cardiac X-ray systems.

    Science.gov (United States)

    Oliveira, M; Lopez, G; Geambastiani, P; Ubeda, C

    2018-05-01

    A quality assurance (QA) program is a valuable tool for the continuous production of optimal quality images. The aim of this paper is to assess a newly developed automatic computer software for image quality (IR) evaluation in fluoroscopy X-ray systems. Test object images were acquired using one fluoroscopy system, Siemens Axiom Artis model (Siemens AG, Medical Solutions Erlangen, Germany). The software was developed as an ImageJ plugin. Two image quality parameters were assessed: high-contrast spatial resolution (HCSR) and signal-to-noise ratio (SNR). The time between manual and automatic image quality assessment procedures were compared. The paired t-test was used to assess the data. p Values of less than 0.05 were considered significant. The Fluoro-QC software generated faster IQ evaluation results (mean = 0.31 ± 0.08 min) than manual procedure (mean = 4.68 ± 0.09 min). The mean difference between techniques was 4.36 min. Discrepancies were identified in the region of interest (ROI) areas drawn manually with evidence of user dependence. The new software presented the results of two tests (HCSR = 3.06, SNR = 5.17) and also collected information from the DICOM header. Significant differences were not identified between manual and automatic measures of SNR (p value = 0.22) and HCRS (p value = 0.46). The Fluoro-QC software is a feasible, fast and free to use method for evaluating imaging quality parameters on fluoroscopy systems. Copyright © 2017 The College of Radiographers. Published by Elsevier Ltd. All rights reserved.

  2. Application of a newly developed software program for image quality assessment in cone-beam computed tomography.

    Science.gov (United States)

    de Oliveira, Marcus Vinicius Linhares; Santos, António Carvalho; Paulo, Graciano; Campos, Paulo Sergio Flores; Santos, Joana

    2017-06-01

    The purpose of this study was to apply a newly developed free software program, at low cost and with minimal time, to evaluate the quality of dental and maxillofacial cone-beam computed tomography (CBCT) images. A polymethyl methacrylate (PMMA) phantom, CQP-IFBA, was scanned in 3 CBCT units with 7 protocols. A macro program was developed, using the free software ImageJ, to automatically evaluate the image quality parameters. The image quality evaluation was based on 8 parameters: uniformity, the signal-to-noise ratio (SNR), noise, the contrast-to-noise ratio (CNR), spatial resolution, the artifact index, geometric accuracy, and low-contrast resolution. The image uniformity and noise depended on the protocol that was applied. Regarding the CNR, high-density structures were more sensitive to the effect of scanning parameters. There were no significant differences between SNR and CNR in centered and peripheral objects. The geometric accuracy assessment showed that all the distance measurements were lower than the real values. Low-contrast resolution was influenced by the scanning parameters, and the 1-mm rod present in the phantom was not depicted in any of the 3 CBCT units. Smaller voxel sizes presented higher spatial resolution. There were no significant differences among the protocols regarding artifact presence. This software package provided a fast, low-cost, and feasible method for the evaluation of image quality parameters in CBCT.

  3. Application of a newly developed software program for image quality assessment in cone-beam computed tomography

    International Nuclear Information System (INIS)

    De Oliveira, Marcus Vinicius Linhares; Campos, Paulo Sergio Flores; Paulo, Graciano; Santos, Antonio Carvalho; Santos, Joana

    2017-01-01

    The purpose of this study was to apply a newly developed free software program, at low cost and with minimal time, to evaluate the quality of dental and maxillofacial cone-beam computed tomography (CBCT) images. A polymethyl methacrylate (PMMA) phantom, CQP-IFBA, was scanned in 3 CBCT units with 7 protocols. A macro program was developed, using the free software ImageJ, to automatically evaluate the image quality parameters. The image quality evaluation was based on 8 parameters: uniformity, the signal-to-noise ratio (SNR), noise, the contrast-to-noise ratio (CNR), spatial resolution, the artifact index, geometric accuracy, and low-contrast resolution. The image uniformity and noise depended on the protocol that was applied. Regarding the CNR, high-density structures were more sensitive to the effect of scanning parameters. There were no significant differences between SNR and CNR in centered and peripheral objects. The geometric accuracy assessment showed that all the distance measurements were lower than the real values. Low-contrast resolution was influenced by the scanning parameters, and the 1-mm rod present in the phantom was not depicted in any of the 3 CBCT units. Smaller voxel sizes presented higher spatial resolution. There were no significant differences among the protocols regarding artifact presence. This software package provided a fast, low-cost, and feasible method for the evaluation of image quality parameters in CBCT

  4. Application of a newly developed software program for image quality assessment in cone-beam computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    De Oliveira, Marcus Vinicius Linhares; Campos, Paulo Sergio Flores [Federal Institute of Bahia, Salvador (Brazil); Paulo, Graciano; Santos, Antonio Carvalho; Santos, Joana [Coimbra Health School, Polytechnic Institute of Coimbra, Coimbra (Portugal)

    2017-06-15

    The purpose of this study was to apply a newly developed free software program, at low cost and with minimal time, to evaluate the quality of dental and maxillofacial cone-beam computed tomography (CBCT) images. A polymethyl methacrylate (PMMA) phantom, CQP-IFBA, was scanned in 3 CBCT units with 7 protocols. A macro program was developed, using the free software ImageJ, to automatically evaluate the image quality parameters. The image quality evaluation was based on 8 parameters: uniformity, the signal-to-noise ratio (SNR), noise, the contrast-to-noise ratio (CNR), spatial resolution, the artifact index, geometric accuracy, and low-contrast resolution. The image uniformity and noise depended on the protocol that was applied. Regarding the CNR, high-density structures were more sensitive to the effect of scanning parameters. There were no significant differences between SNR and CNR in centered and peripheral objects. The geometric accuracy assessment showed that all the distance measurements were lower than the real values. Low-contrast resolution was influenced by the scanning parameters, and the 1-mm rod present in the phantom was not depicted in any of the 3 CBCT units. Smaller voxel sizes presented higher spatial resolution. There were no significant differences among the protocols regarding artifact presence. This software package provided a fast, low-cost, and feasible method for the evaluation of image quality parameters in CBCT.

  5. Software development methodologies and practices in startups:systematic literature review

    OpenAIRE

    Tegegne, E. (Esubalew)

    2018-01-01

    Abstract Startups are newly created companies with little or no operating history and with limited resources and markets. Software startup are aiming to develop cutting edge software products under highly uncertain conditions, overcoming fast-growing markets under multiple influences. The significance of startups for economic development is growing in software business due to their ability to quickly create innovative techn...

  6. Softwareland Chronicles: A Software Development Meta-Process Proposal

    Directory of Open Access Journals (Sweden)

    Bolanos Sandro

    2016-05-01

    Full Text Available This paper presents the software development meta-process (SD-MP as a proposal to set up software projects. Within this proposal we offer conceptual elements that help solve the war of methodologies and processes in favor of an integrating viewpoint, where the main flaws associated with conventional and agile approaches are removed. Our newly developed software platform to support the meta-process is also presented together with three case studies involving projects currently in progress, where the framework proposed in SD-MP has been applied.

  7. CERN software developers gathering in September

    CERN Document Server

    Antonella Del Rosso

    2015-01-01

    Hundreds of developers work on many different projects at CERN – from data analysis to beam operations and administrative applications. As of this September, they will have an opportunity to meet each other at the newly established Developers@CERN Forum.   “We go to conferences elsewhere but we hardly ever meet here at CERN, where we all work on our own separate software projects,” says José Carlos Luna, a member of the IT department and one of the organisers of the first Developers@CERN Forum. Indeed, although several CERN departments have software developers working in their teams, there is no proper “community” built around them. The first Developers@CERN Forum will be held on 28 and 29 September. The event is being organised by a few developers from the IT department, together with colleagues from the GS and EN departments. Its main scope is to reach out to all the departments in an effort to bring all CERN’s software dev...

  8. Sizing Performance of the Newly Developed Eddy Current System

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Chan Hee; Lee, Hee Jong; Yoo, Hyun Ju; Moon, Gyoon Young; Lee, Tae Hoon [Korea Hydro and Nuclear Power Co., Ltd., Daejeon (Korea, Republic of)

    2013-10-15

    This paper describes the comparison results of sizing performance for two systems. The KHNP developed a new eddy current testing system for the inspection of steam generator tubing in domestic nuclear power plants. The equivalency assessment of the newly developed system with the EPRI-qualified system was already carried out. In this paper, the comparisons of depth-sizing performance for the artificial flaws between two systems were performed. The results show that the newly developed system is in good agreement with the qualified system. Therefore, it is expected that the newly developed eddy current system can be used for the inspection of steam generator tubing in nuclear power plants. There are some non-destructive examination (NDE) methods for the inspection of components in nuclear power plants, such as ultrasonic, radiographic, eddy current testing, etc. The eddy current testing is widely used for the inspection of steam generator (SG) tubing because it offers a relatively low cost approach for high speed, large scale testing of metallic materials in high pressure and temperature engineering systems. The Korea Hydro and Nuclear Power Co., Ltd. (KHNP) developed an eddy current testing system for the inspection of steam generator tubing in nuclear power plants. This system includes not only hardware but software such as the frequency generator and data acquisition-analysis program. The foreign eddy current system developed by ZETEC is currently used for the inspection of steam generator tubing in domestic nuclear power plants. The equivalency assessment between two systems was already carried out in accordance with the EPRI steam generator examination guidelines.

  9. Software system development of NPP plant DiD risk monitor. Basic design of software configuration

    International Nuclear Information System (INIS)

    Yoshikawa, Hidekazu; Nakagawa, Takashi

    2015-01-01

    A new risk monitor system is under development which can be applied not only to prevent severe accident in daily operation but also to serve as to mitigate the radiological hazard just after severe accident happens and long term management of post-severe accident consequences. The fundamental method for the new risk monitor system is first given on how to configure the Plant Defense in-Depth (DiD) Risk Monitor by object-oriented software system based on functional modeling approach. In this paper, software system for the plant DiD risk monitor is newly developed by object oriented method utilizing Unified Modeling Language (UML). Usage of the developed DiD risk monitor is also introduced by showing examples for LOCA case of AP1000. (author)

  10. Development of regulation technologies for software verification and validation of I and C systems important to safety in NPPs

    International Nuclear Information System (INIS)

    Kim, Bok Ryul; Oh, S. H.; Zhu, O. P.; Jeong, C. H.; Hwang, H. S.; Goo, C. S.; Chung, Y. H.

    2000-12-01

    The project has provided the draft regulatory policies and guides regarding the quality assurance of software used to I and C systems important to safety in nuclear power plants, differentiated V and V activities by safety classes which are important elements in ensuring software quality assurance, and suggested V and V techniques to be applied, regulatory guides and checklists for reviewing software important to safety. The project introduced the classification concepts on software quality assurance. The I and C systems important to safety are classified into IC-1, IC-2, IC-3, and Non-IC as based on safety classifications. And the software used to these I and C systems are classified into 3 categories, say, safety-critical software, safety-related software, and non-safety software, in the light of safety importance of functions to be performed. Based upon these safety classifications, the extent of software V and V activities by each class has been differentiated each other. On the other hand, the project has divided software important to safety into newly-developed software and previously-developed software in terms of design and implementation, and provided the draft regulatory guides on each type of software, for instance, newly-developed software, previously-developed software, and software tools

  11. Rapid estimation of split renal function in kidney donors using software developed for computed tomographic renal volumetry

    Energy Technology Data Exchange (ETDEWEB)

    Kato, Fumi, E-mail: fumikato@med.hokudai.ac.jp [Department of Radiology, Hokkaido University Graduate School of Medicine, N15, W7, Kita-ku, Sapporo, Hokkaido 060-8638 (Japan); Kamishima, Tamotsu, E-mail: ktamotamo2@yahoo.co.jp [Department of Radiology, Hokkaido University Graduate School of Medicine, N15, W7, Kita-ku, Sapporo, Hokkaido 060-8638 (Japan); Morita, Ken, E-mail: kenordic@carrot.ocn.ne.jp [Department of Urology, Hokkaido University Graduate School of Medicine, N15, W7, Kita-ku, Sapporo, 060-8638 (Japan); Muto, Natalia S., E-mail: nataliamuto@gmail.com [Department of Radiology, Hokkaido University Graduate School of Medicine, N15, W7, Kita-ku, Sapporo, Hokkaido 060-8638 (Japan); Okamoto, Syozou, E-mail: shozo@med.hokudai.ac.jp [Department of Nuclear Medicine, Hokkaido University Graduate School of Medicine, N15, W7, Kita-ku, Sapporo, 060-8638 (Japan); Omatsu, Tokuhiko, E-mail: omatoku@nirs.go.jp [Department of Radiology, Hokkaido University Graduate School of Medicine, N15, W7, Kita-ku, Sapporo, Hokkaido 060-8638 (Japan); Oyama, Noriko, E-mail: ZAT04404@nifty.ne.jp [Department of Radiology, Hokkaido University Graduate School of Medicine, N15, W7, Kita-ku, Sapporo, Hokkaido 060-8638 (Japan); Terae, Satoshi, E-mail: saterae@med.hokudai.ac.jp [Department of Radiology, Hokkaido University Graduate School of Medicine, N15, W7, Kita-ku, Sapporo, Hokkaido 060-8638 (Japan); Kanegae, Kakuko, E-mail: IZW00143@nifty.ne.jp [Department of Nuclear Medicine, Hokkaido University Graduate School of Medicine, N15, W7, Kita-ku, Sapporo, 060-8638 (Japan); Nonomura, Katsuya, E-mail: k-nonno@med.hokudai.ac.jp [Department of Urology, Hokkaido University Graduate School of Medicine, N15, W7, Kita-ku, Sapporo, 060-8638 (Japan); Shirato, Hiroki, E-mail: shirato@med.hokudai.ac.jp [Department of Radiology, Hokkaido University Graduate School of Medicine, N15, W7, Kita-ku, Sapporo, Hokkaido 060-8638 (Japan)

    2011-07-15

    Purpose: To evaluate the speed and precision of split renal volume (SRV) measurement, which is the ratio of unilateral renal volume to bilateral renal volume, using a newly developed software for computed tomographic (CT) volumetry and to investigate the usefulness of SRV for the estimation of split renal function (SRF) in kidney donors. Method: Both dynamic CT and renal scintigraphy in 28 adult potential living renal donors were the subjects of this study. We calculated SRV using the newly developed volumetric software built into a PACS viewer (n-SRV), and compared it with SRV calculated using a conventional workstation, ZIOSOFT (z-SRV). The correlation with split renal function (SRF) using {sup 99m}Tc-DMSA scintigraphy was also investigated. Results: The time required for volumetry of bilateral kidneys with the newly developed software (16.7 {+-} 3.9 s) was significantly shorter than that of the workstation (102.6 {+-} 38.9 s, p < 0.0001). The results of n-SRV (49.7 {+-} 4.0%) were highly consistent with those of z-SRV (49.9 {+-} 3.6%), with a mean discrepancy of 0.12 {+-} 0.84%. The SRF also agreed well with the n-SRV, with a mean discrepancy of 0.25 {+-} 1.65%. The dominant side determined by SRF and n-SRV showed agreement in 26 of 28 cases (92.9%). Conclusion: The newly developed software for CT volumetry was more rapid than the conventional workstation volumetry and just as accurate, and was suggested to be useful for the estimation of SRF and thus the dominant side in kidney donors.

  12. Rapid estimation of split renal function in kidney donors using software developed for computed tomographic renal volumetry

    International Nuclear Information System (INIS)

    Kato, Fumi; Kamishima, Tamotsu; Morita, Ken; Muto, Natalia S.; Okamoto, Syozou; Omatsu, Tokuhiko; Oyama, Noriko; Terae, Satoshi; Kanegae, Kakuko; Nonomura, Katsuya; Shirato, Hiroki

    2011-01-01

    Purpose: To evaluate the speed and precision of split renal volume (SRV) measurement, which is the ratio of unilateral renal volume to bilateral renal volume, using a newly developed software for computed tomographic (CT) volumetry and to investigate the usefulness of SRV for the estimation of split renal function (SRF) in kidney donors. Method: Both dynamic CT and renal scintigraphy in 28 adult potential living renal donors were the subjects of this study. We calculated SRV using the newly developed volumetric software built into a PACS viewer (n-SRV), and compared it with SRV calculated using a conventional workstation, ZIOSOFT (z-SRV). The correlation with split renal function (SRF) using 99m Tc-DMSA scintigraphy was also investigated. Results: The time required for volumetry of bilateral kidneys with the newly developed software (16.7 ± 3.9 s) was significantly shorter than that of the workstation (102.6 ± 38.9 s, p < 0.0001). The results of n-SRV (49.7 ± 4.0%) were highly consistent with those of z-SRV (49.9 ± 3.6%), with a mean discrepancy of 0.12 ± 0.84%. The SRF also agreed well with the n-SRV, with a mean discrepancy of 0.25 ± 1.65%. The dominant side determined by SRF and n-SRV showed agreement in 26 of 28 cases (92.9%). Conclusion: The newly developed software for CT volumetry was more rapid than the conventional workstation volumetry and just as accurate, and was suggested to be useful for the estimation of SRF and thus the dominant side in kidney donors.

  13. Development of Safety-Critical Software for Nuclear Power Plant using a CASE Tool

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chang Ho; Oh, Do Young; Kim, Koh Eun; Choi, Woong Seock; Sohn, Se Do; Kim, Jae Hack; Kim, Hang Bae [KEPCO E and C, Daejeon (Korea, Republic of)

    2011-08-15

    The Integrated SOftware Development Environment (ISODE) is developed to provide the major S/W life cycle processes that are composed of development process, V/V process, requirements traceability process, and automated document generation process and target importing process to Programmable Logic Controller (PLC) platform. This provides critical safety software developers with a certified, domain optimized, model-based development environment, and the associated services to reduce time and efforts to develop software such as debugging, simulation, code generation and document generation. This also provides critical safety software verifiers with integrated V/V features of each phase of the software life cycle using appropriate tools such as model test coverage, formal verification, and automated report generation. In addition to development and verification, the ISODE gives a complete traceability solution from the SW design phase to the testing phase. Using this information, the coverage and impact analysis can be done easily whenever software modification is necessary. The final source codes of ISODE are imported into the newly developed PLC environment, as a module based after automatically converted into the format required by PLC. Additional tests for module and unit level are performed on the target platform.

  14. Development of Safety-Critical Software for Nuclear Power Plant using a CASE Tool

    International Nuclear Information System (INIS)

    Kim, Chang Ho; Oh, Do Young; Kim, Koh Eun; Choi, Woong Seock; Sohn, Se Do; Kim, Jae Hack; Kim, Hang Bae

    2011-01-01

    The Integrated SOftware Development Environment (ISODE) is developed to provide the major S/W life cycle processes that are composed of development process, V/V process, requirements traceability process, and automated document generation process and target importing process to Programmable Logic Controller (PLC) platform. This provides critical safety software developers with a certified, domain optimized, model-based development environment, and the associated services to reduce time and efforts to develop software such as debugging, simulation, code generation and document generation. This also provides critical safety software verifiers with integrated V/V features of each phase of the software life cycle using appropriate tools such as model test coverage, formal verification, and automated report generation. In addition to development and verification, the ISODE gives a complete traceability solution from the SW design phase to the testing phase. Using this information, the coverage and impact analysis can be done easily whenever software modification is necessary. The final source codes of ISODE are imported into the newly developed PLC environment, as a module based after automatically converted into the format required by PLC. Additional tests for module and unit level are performed on the target platform

  15. [The primary research and development of software oversampling mapping system for electrocardiogram].

    Science.gov (United States)

    Zhou, Yu; Ren, Jie

    2011-04-01

    We put forward a new concept of software oversampling mapping system for electrocardiogram (ECG) to assist the research of the ECG inverse problem to improve the generality of mapping system and the quality of mapping signals. We then developed a conceptual system based on the traditional ECG detecting circuit, Labview and DAQ card produced by National Instruments, and at the same time combined the newly-developed oversampling method into the system. The results indicated that the system could map ECG signals accurately and the quality of the signals was good. The improvement of hardware and enhancement of software made the system suitable for mapping in different situations. So the primary development of the software for oversampling mapping system was successful and further research and development can make the system a powerful tool for researching ECG inverse problem.

  16. Software engineering architecture-driven software development

    CERN Document Server

    Schmidt, Richard F

    2013-01-01

    Software Engineering: Architecture-driven Software Development is the first comprehensive guide to the underlying skills embodied in the IEEE's Software Engineering Body of Knowledge (SWEBOK) standard. Standards expert Richard Schmidt explains the traditional software engineering practices recognized for developing projects for government or corporate systems. Software engineering education often lacks standardization, with many institutions focusing on implementation rather than design as it impacts product architecture. Many graduates join the workforce with incomplete skil

  17. Agile Software Development

    Science.gov (United States)

    Biju, Soly Mathew

    2008-01-01

    Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

  18. Music Software and Emerging Technology.

    Science.gov (United States)

    Peters, G. David

    1992-01-01

    Traces the history of instructional computing in music education. Describes the development of music software and hardware. Discusses potential benefits of using the newly developed software in the classroom. Suggests that educators and musicians interact with the publishing community to help define their needs in music education. (DK)

  19. A computer literacy scale for newly enrolled nursing college students: development and validation.

    Science.gov (United States)

    Lin, Tung-Cheng

    2011-12-01

    Increasing application and use of information systems and mobile technologies in the healthcare industry require increasing nurse competency in computer use. Computer literacy is defined as basic computer skills, whereas computer competency is defined as the computer skills necessary to accomplish job tasks. Inadequate attention has been paid to computer literacy and computer competency scale validity. This study developed a computer literacy scale with good reliability and validity and investigated the current computer literacy of newly enrolled students to develop computer courses appropriate to students' skill levels and needs. This study referenced Hinkin's process to develop a computer literacy scale. Participants were newly enrolled first-year undergraduate students, with nursing or nursing-related backgrounds, currently attending a course entitled Information Literacy and Internet Applications. Researchers examined reliability and validity using confirmatory factor analysis. The final version of the developed computer literacy scale included six constructs (software, hardware, multimedia, networks, information ethics, and information security) and 22 measurement items. Confirmatory factor analysis showed that the scale possessed good content validity, reliability, convergent validity, and discriminant validity. This study also found that participants earned the highest scores for the network domain and the lowest score for the hardware domain. With increasing use of information technology applications, courses related to hardware topic should be increased to improve nurse problem-solving abilities. This study recommends that emphases on word processing and network-related topics may be reduced in favor of an increased emphasis on database, statistical software, hospital information systems, and information ethics.

  20. Agile software development

    CERN Document Server

    Dingsoyr, Torgeir; Moe, Nils Brede

    2010-01-01

    Agile software development has become an umbrella term for a number of changes in how software developers plan and coordinate their work, how they communicate with customers and external stakeholders, and how software development is organized in small, medium, and large companies, from the telecom and healthcare sectors to games and interactive media. Still, after a decade of research, agile software development is the source of continued debate due to its multifaceted nature and insufficient synthesis of research results. Dingsoyr, Dyba, and Moe now present a comprehensive snapshot of the kno

  1. Developing Software Simulations

    Directory of Open Access Journals (Sweden)

    Tom Hall

    2007-06-01

    Full Text Available Programs in education and business often require learners to develop and demonstrate competence in specified areas and then be able to effectively apply this knowledge. One method to aid in developing a skill set in these areas is through the use of software simulations. These simulations can be used for learner demonstrations of competencies in a specified course as well as a review of the basic skills at the beginning of subsequent courses. The first section of this paper discusses ToolBook, the software used to develop our software simulations. The second section discusses the process of developing software simulations. The third part discusses how we have used software simulations to assess student knowledge of research design by providing simulations that allow the student to practice using SPSS and Excel.

  2. Space Flight Software Development Software for Intelligent System Health Management

    Science.gov (United States)

    Trevino, Luis C.; Crumbley, Tim

    2004-01-01

    The slide presentation examines the Marshall Space Flight Center Flight Software Branch, including software development projects, mission critical space flight software development, software technical insight, advanced software development technologies, and continuous improvement in the software development processes and methods.

  3. Gammasphere software development

    International Nuclear Information System (INIS)

    Piercey, R.B.

    1994-01-01

    This report describes the activities of the nuclear physics group at Mississippi State University which were performed during 1993. Significant progress has been made in the focus areas: chairing the Gammasphere Software Working Group (SWG); assisting with the porting and enhancement of the ORNL UPAK histogramming software package; and developing standard formats for Gammasphere data products. In addition, they have established a new public ftp archive to distribute software and software development tools and information

  4. Gammasphere software development

    International Nuclear Information System (INIS)

    Piercey, R.B.

    1993-01-01

    Activities of the nuclear physics group are described. Progress was made in organizing the Gammasphere Software Working Group, establishing a nuclear computing facility, participating in software development at Lawrence Berkeley, developing a common data file format, and adapting the ORNL UPAK software to run at Gammasphere. A universal histogram object was developed that defines a file format and provides for an objective-oriented programming model. An automated liquid nitrogen fill system was developed for Gammasphere (110 Ge detectors comprise the sphere)

  5. Development, Validation and Integration of the ATLAS Trigger System Software in Run 2

    CERN Document Server

    Keyes, Robert; The ATLAS collaboration

    2016-01-01

    The trigger system of the ATLAS detector at the LHC is a combination of hardware, firmware and software, associated to various sub-detectors that must seamlessly cooperate in order to select 1 collision of interest out of every 40,000 delivered by the LHC every millisecond. This talk will discuss the challenges, workflow and organization of the ongoing trigger software development, validation and deployment. This development, from the top level integration and configuration to the individual components responsible for each sub system, is done to ensure that the most up to date algorithms are used to optimize the performance of the experiment. This optimization hinges on the reliability and predictability of the software performance, which is why validation is of the utmost importance. The software adheres to a hierarchical release structure, with newly validated releases propagating upwards. Integration tests are carried out on a daily basis to ensure that the releases deployed to the online trigger farm duri...

  6. Improving Software Developer's Competence

    DEFF Research Database (Denmark)

    Abrahamsson, Pekka; Kautz, Karlheinz; Sieppi, Heikki

    2002-01-01

    Emerging agile software development methods are people oriented development approaches to be used by the software industry. The personal software process (PSP) is an accepted method for improving the capabilities of a single software engineer. Five original hypotheses regarding the impact...

  7. Package-based software development

    NARCIS (Netherlands)

    Jonge, de M.; Chroust, G.; Hofer, C.

    2003-01-01

    The main goal of component-based software engineering is to decrease development time and development costs of software systems, by reusing prefabricated building blocks. Here we focus on software reuse within the implementation of such component-based applications, and on the corresponding software

  8. Systematic Software Development

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Méndez Fernández, Daniel

    2015-01-01

    The speed of innovation and the global allocation of resources to accelerate development or to reduce cost put pressure on the software industry. In the global competition, especially so-called high-price countries have to present arguments why the higher development cost is justified and what...... makes these countries an attractive host for software companies. Often, high-quality engineering and excellent quality of products, e.g., machinery and equipment, are mentioned. Yet, the question is: Can such arguments be also found for the software industry? We aim at investigating the degree...... of professionalism and systematization of software development to draw a map of strengths and weaknesses. To this end, we conducted as a first step an exploratory survey in Germany, presented in this paper. In this survey, we focused on the perceived importance of the two general software engineering process areas...

  9. Micro-computed tomography newly developed for in vivo small animal imaging

    International Nuclear Information System (INIS)

    Arai, Yoshinori; Ninomiya, Tadashi; Kato, Takafumi; Masuda, Yuji

    2005-01-01

    The aim of this paper is to report a newly developed micro-computed tomography system for in vivo use. The system was composed of a micro-focus X-ray tube and an image intensifier (I.I.), both of which rotated around the object stage. A guinea pig and a rat were examined. The anesthetized animal was set on the secure object stage. Images of the head of the guinea pig and the tibia knee joint of the rat were taken. In addition, an image of the rat's tail was taken. The reconstruction and the image viewing were carried out using I-View software. The voxel matrix was 512 x 512 x 384. The voxel sizes ranged from 10 x 10 x 10 μm to 100 x 100 x 100 μm. The exposure time was 17 s, and the reconstruction time was 150 s. The head of the guinea pig and the tibia/knee joint of the rat were observed clearly under 100-μm and 30μm voxels, respectively. The trabecular bone of the tail was also observed clearly under a 10 μm voxel. The newly developed micro-computed tomography system makes it possible to obtain images of anesthetized animals set on a secure object stage. Clear bone images of the small animals could be obtained within a short time. (author)

  10. Crowdsourcing cloud-based software development

    CERN Document Server

    Li, Wei; Tsai, Wei-Tek; Wu, Wenjun

    2015-01-01

    This book presents the latest research on the software crowdsourcing approach to develop large and complex software in a cloud-based platform. It develops the fundamental principles, management organization and processes, and a cloud-based infrastructure to support this new software development approach. The book examines a variety of issues in software crowdsourcing processes, including software quality, costs, diversity of solutions, and the competitive nature of crowdsourcing processes. Furthermore, the book outlines a research roadmap of this emerging field, including all the key technology and management issues for the foreseeable future. Crowdsourcing, as demonstrated by Wikipedia and Facebook for online web applications, has shown promising results for a variety of applications, including healthcare, business, gold mining exploration, education, and software development. Software crowdsourcing is emerging as a promising solution to designing, developing and maintaining software. Preliminary software cr...

  11. [An Introduction to A Newly-developed "Acupuncture Needle Manipulation Training-evaluation System" Based on Optical Motion Capture Technique].

    Science.gov (United States)

    Zhang, Ao; Yan, Xing-Ke; Liu, An-Guo

    2016-12-25

    In the present paper, the authors introduce a newly-developed "Acupuncture Needle Manipulation Training-evaluation System" based on optical motion capture technique. It is composed of two parts, sensor and software, and overcomes some shortages of mechanical motion capture technique. This device is able to analyze the data of operations of the pressing-hand and needle-insertion hand during acupuncture performance and its software contains personal computer (PC) version, Android version, and Internetwork Operating System (IOS) Apple version. It is competent in recording and analyzing information of any ope-rator's needling manipulations, and is quite helpful for teachers in teaching, training and examining students in clinical practice.

  12. Computer-Aided Software Engineering - An approach to real-time software development

    Science.gov (United States)

    Walker, Carrie K.; Turkovich, John J.

    1989-01-01

    A new software engineering discipline is Computer-Aided Software Engineering (CASE), a technology aimed at automating the software development process. This paper explores the development of CASE technology, particularly in the area of real-time/scientific/engineering software, and a history of CASE is given. The proposed software development environment for the Advanced Launch System (ALS CASE) is described as an example of an advanced software development system for real-time/scientific/engineering (RT/SE) software. The Automated Programming Subsystem of ALS CASE automatically generates executable code and corresponding documentation from a suitably formatted specification of the software requirements. Software requirements are interactively specified in the form of engineering block diagrams. Several demonstrations of the Automated Programming Subsystem are discussed.

  13. Firing Room Remote Application Software Development & Swamp Works Laboratory Robot Software Development

    Science.gov (United States)

    Garcia, Janette

    2016-01-01

    The National Aeronautics and Space Administration (NASA) is creating a way to send humans beyond low Earth orbit, and later to Mars. Kennedy Space Center (KSC) is working to make this possible by developing a Spaceport Command and Control System (SCCS) which will allow the launch of Space Launch System (SLS). This paper's focus is on the work performed by the author in her first and second part of the internship as a remote application software developer. During the first part of her internship, the author worked on the SCCS's software application layer by assisting multiple ground subsystems teams including Launch Accessories (LACC) and Environmental Control System (ECS) on the design, development, integration, and testing of remote control software applications. Then, on the second part of the internship, the author worked on the development of robot software at the Swamp Works Laboratory which is a research and technology development group which focuses on inventing new technology to help future In-Situ Resource Utilization (ISRU) missions.

  14. Secure software development training course

    Directory of Open Access Journals (Sweden)

    Victor S. Gorbatov

    2017-06-01

    Full Text Available Information security is one of the most important criteria for the quality of developed software. To obtain a sufficient level of application security companies implement security process into software development life cycle. At this stage software companies encounter with deficit employees who able to solve problems of software design, implementation and application security. This article provides a description of the secure software development training course. Training course of application security is designed for co-education students of different IT-specializations.

  15. Factors that motivate software developers in Nigerian's software ...

    African Journals Online (AJOL)

    It was also observed those courtesy, good reward systems, regular training, recognition, tolerance of mistakes and good leadership were high motivators of software developers. Keywords: Software developers, information technology, project managers, Nigeria International Journal of Natural and Applied Sciences, 6(4): ...

  16. Development of a test rig and its application for validation and reliability testing of safety-critical software

    Energy Technology Data Exchange (ETDEWEB)

    Thai, N D; McDonald, A M [Atomic Energy of Canada Ltd., Mississauga, ON (Canada)

    1996-12-31

    This paper describes a versatile test rig developed by AECL for functional testing of safety-critical software used in the process trip computers of the Wolsong CANDU stations. The description covers the hardware and software aspects of the test rig, the test language and its interpreter, and other major testing software utilities such as the test oracle, sampler and profiler. The paper also discusses the application of the rig in the final stages of testing of the process trip computer software, namely validation and reliability tests. It shows how random test cases are generated, test scripts prepared and automatically run on the test rig. The versatility of the rig is further demonstrated in other types of testing such as sub-system tests, verification of the test oracle, testing of newly-developed test script, self-test and calibration. (author). 5 tabs., 10 figs.

  17. Development of a test rig and its application for validation and reliability testing of safety-critical software

    International Nuclear Information System (INIS)

    Thai, N.D.; McDonald, A.M.

    1995-01-01

    This paper describes a versatile test rig developed by AECL for functional testing of safety-critical software used in the process trip computers of the Wolsong CANDU stations. The description covers the hardware and software aspects of the test rig, the test language and its interpreter, and other major testing software utilities such as the test oracle, sampler and profiler. The paper also discusses the application of the rig in the final stages of testing of the process trip computer software, namely validation and reliability tests. It shows how random test cases are generated, test scripts prepared and automatically run on the test rig. The versatility of the rig is further demonstrated in other types of testing such as sub-system tests, verification of the test oracle, testing of newly-developed test script, self-test and calibration. (author). 5 tabs., 10 figs

  18. Comparative study on software development methodologies

    Directory of Open Access Journals (Sweden)

    Mihai Liviu DESPA

    2014-12-01

    Full Text Available This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager handles challenges and risks that are predominantly encountered in business and research areas that involve state of the art technology. Conventional software development stages are defined and briefly described. Development stages are the building blocks of any software development methodology so it is important to properly research this aspect. Current software development methodologies are presented. Development stages are defined for every showcased methodology. For each methodology a graphic representation is illustrated in order to better individualize its structure. Software development methodologies are compared by highlighting strengths and weaknesses from the stakeholder's point of view. Conclusions are formulated and a research direction aimed at formalizing a software development methodology dedicated to innovation orientated IT projects is enunciated.

  19. Usability in open source software development

    DEFF Research Database (Denmark)

    Andreasen, M. S.; Nielsen, H. V.; Schrøder, S. O.

    2006-01-01

    Open Source Software (OSS) development has gained significant importance in the production of soft-ware products. Open Source Software developers have produced systems with a functionality that is competitive with similar proprietary software developed by commercial software organizations. Yet OSS...

  20. The Ragnarok Software Development Environment

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    1999-01-01

    Ragnarok is an experimental software development environment that focuses on enhanced support for managerial activities in large scale software development taking the daily work of the software developer as its point of departure. The main emphasis is support in three areas: management, navigation......, and collaboration. The leitmotif is the software architecture, which is extended to handle managerial data in addition to source code; this extended software architecture is put under tight version- and configuration management control and furthermore used as basis for visualisation. Preliminary results of using...

  1. Customer Interaction in Software Development: A Comparison of Software Methodologies Deployed in Namibian Software Firms

    CSIR Research Space (South Africa)

    Iyawa, GE

    2016-01-01

    Full Text Available within the Namibian context. An implication for software project managers and software developers is that customer interaction should be properly managed to ensure that the software methodologies for improving software development processes...

  2. Comparative study on software development methodologies

    OpenAIRE

    Mihai Liviu DESPA

    2014-01-01

    This paper focuses on the current state of knowledge in the field of software development methodologies. It aims to set the stage for the formalization of a software development methodology dedicated to innovation orientated IT projects. The paper starts by depicting specific characteristics in software development project management. Managing software development projects involves techniques and skills that are proprietary to the IT industry. Also the software development project manager han...

  3. Global software development

    DEFF Research Database (Denmark)

    Matthiesen, Stina

    2016-01-01

    This overview presents the mid stages of my doctoral research-based on ethnographic work conducted in IT companies in India and in Denmark-on collaborative work within global software development (GSD). In the following I briefly introduce how this research seeks to spark a debate in CSCW...... by challenging contemporary ideals about software development outsourcing through the exploration of the multiplicities and asymmetric dynamics inherent in the collaborative work of GSD....

  4. Impact of Agile Software Development Model on Software Maintainability

    Science.gov (United States)

    Gawali, Ajay R.

    2012-01-01

    Software maintenance and support costs account for up to 60% of the overall software life cycle cost and often burdens tightly budgeted information technology (IT) organizations. Agile software development approach delivers business value early, but implications on software maintainability are still unknown. The purpose of this quantitative study…

  5. MEASUREMENT PROCESS OF SOFTWARE DEVELOPMENT PROJECTS FOR SUPPORTING STRATEGIC BUSINESS OBJECTIVES IN SOFTWARE DEVELOPING COMPANIES

    Directory of Open Access Journals (Sweden)

    Sandra Lais Pedroso

    2013-08-01

    Full Text Available Software developing companies work in a competitive market and are often challenged to make business decisions with impact on competitiveness. Models accessing maturity for software development processes quality, such as CMMI and MPS-BR, comprise process measurements systems (PMS. However, these models are not necessarily suitable to support business decisions, neither to achieve strategic goals. The objective of this work is to analyze how the PMS of software development projects could support business strategies for software developing companies. Results taken from this work show that PMS results from maturity models for software processes can be suited to help evaluating operating capabilities and supporting strategic business decisions.

  6. Aspect-Oriented Software Development

    NARCIS (Netherlands)

    Filman, R.E.; Elrad, T.; Clarke, S.; Aksit, Mehmet; Unknown, [Unknown

    2004-01-01

    Software development is changing. The opportunities of the Internet, computerized businesses, and computer-savvy consumers, the exponential decline in the cost of computation and communication, and the increasingly dynamic environment for longer-living systems are pressing software developers to

  7. Virtual Exercise Training Software System

    Science.gov (United States)

    Vu, L.; Kim, H.; Benson, E.; Amonette, W. E.; Barrera, J.; Perera, J.; Rajulu, S.; Hanson, A.

    2018-01-01

    The purpose of this study was to develop and evaluate a virtual exercise training software system (VETSS) capable of providing real-time instruction and exercise feedback during exploration missions. A resistive exercise instructional system was developed using a Microsoft Kinect depth-camera device, which provides markerless 3-D whole-body motion capture at a small form factor and minimal setup effort. It was hypothesized that subjects using the newly developed instructional software tool would perform the deadlift exercise with more optimal kinematics and consistent technique than those without the instructional software. Following a comprehensive evaluation in the laboratory, the system was deployed for testing and refinement in the NASA Extreme Environment Mission Operations (NEEMO) analog.

  8. Agile software development

    CERN Document Server

    Stober, Thomas

    2009-01-01

    Software Development is moving towards a more agile and more flexible approach. It turns out that the traditional 'waterfall' model is not supportive in an environment where technical, financial and strategic constraints are changing almost every day. But what is agility? What are today's major approaches? And especially: What is the impact of agile development principles on the development teams, on project management and on software architects? How can large enterprises become more agile and improve their business processes, which have been existing since many, many years? What are the limit

  9. Development of Automatic Visceral Fat Volume Calculation Software for CT Volume Data

    Directory of Open Access Journals (Sweden)

    Mitsutaka Nemoto

    2014-01-01

    Full Text Available Objective. To develop automatic visceral fat volume calculation software for computed tomography (CT volume data and to evaluate its feasibility. Methods. A total of 24 sets of whole-body CT volume data and anthropometric measurements were obtained, with three sets for each of four BMI categories (under 20, 20 to 25, 25 to 30, and over 30 in both sexes. True visceral fat volumes were defined on the basis of manual segmentation of the whole-body CT volume data by an experienced radiologist. Software to automatically calculate visceral fat volumes was developed using a region segmentation technique based on morphological analysis with CT value threshold. Automatically calculated visceral fat volumes were evaluated in terms of the correlation coefficient with the true volumes and the error relative to the true volume. Results. Automatic visceral fat volume calculation results of all 24 data sets were obtained successfully and the average calculation time was 252.7 seconds/case. The correlation coefficients between the true visceral fat volume and the automatically calculated visceral fat volume were over 0.999. Conclusions. The newly developed software is feasible for calculating visceral fat volumes in a reasonable time and was proved to have high accuracy.

  10. A Quantitative Study of Global Software Development Teams, Requirements, and Software Projects

    Science.gov (United States)

    Parker, Linda L.

    2016-01-01

    The study explored the relationship between global software development teams, effective software requirements, and stakeholders' perception of successful software development projects within the field of information technology management. It examined the critical relationship between Global Software Development (GSD) teams creating effective…

  11. Open Source Software Development

    Science.gov (United States)

    2011-01-01

    appropriate to refer to FOSS or FLOSS (L for Libre , where the alternative term “ libre software ” has popularity in some parts of the world) in order...Applying Social Network Analysis to Community-Drive Libre Software Projects, Intern. J. Info. Tech. and Web Engineering, 2006, 1(3), 27-28. 17...Open Source Software Development* Walt Scacchi Institute for Software Researcher University of California, Irvine Irvine, CA 92697-3455 USA Abstract

  12. Software Development as Music Education Research

    Science.gov (United States)

    Brown, Andrew R.

    2007-01-01

    This paper discusses how software development can be used as a method for music education research. It explains how software development can externalize ideas, stimulate action and reflection, and provide evidence to support the educative value of new software-based experiences. Parallels between the interactive software development process and…

  13. Formalizing the ISDF Software Development Methodology

    Directory of Open Access Journals (Sweden)

    Mihai Liviu DESPA

    2015-01-01

    Full Text Available The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of what makes a web application innovative. Innovation in software development is presented from the end-user, project owner and project manager’s point of view. The main components of a software development methodology are identified. Thus a software development methodology should account for people, roles, skills, teams, tools, techniques, processes, activities, standards, quality measuring tools, and team values. Current software development models are presented and briefly analysed. The need for a dedicated innovation oriented software development methodology is emphasized by highlighting shortcomings of current software development methodologies when tackling innovation. The ISDF methodology is presented in the context of developing an actual application. The ALHPA application is used as a case study for emphasizing the characteristics of the ISDF methodology. The development life cycle of the ISDF methodology includes research, planning, prototyping, design, development, testing, setup and maintenance. Artefacts generated by the ISDF methodology are presented. Quality is managed in the ISDF methodology by assessing compliance, usability, reliability, repeatability, availability and security. In order to properly asses each quality component a dedicated indicator is built. A template for interpreting each indicator is provided. Conclusions are formulated and new related research topics are submitted for debate.

  14. Formalizing the ISDF Software Development Methodology

    OpenAIRE

    Mihai Liviu DESPA

    2015-01-01

    The paper is aimed at depicting the ISDF software development methodology by emphasizing quality management and software development lifecycle. The ISDF methodology was built especially for innovative software development projects. The ISDF methodology was developed empirically by trial and error in the process of implementing multiple innovative projects. The research process began by analysing key concepts like innovation and software development and by settling the important dilemma of wha...

  15. Teamwork in Distributed Agile Software Development

    OpenAIRE

    Gurram, Chaitanya; Bandi, Srinivas Goud

    2013-01-01

    Context: Distributed software development has become a most desired way of software development. Application of agile development methodologies in distributed environments has taken a new trend in developing software due to its benefits of improved communication and collaboration. Teamwork is an important concept that agile methodologies facilitate and is one of the potential determinants of team performance which was not focused in distributed agile software development. Objectives: This res...

  16. Gammasphere software development. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Piercey, R.B.

    1994-01-01

    This report describes the activities of the nuclear physics group at Mississippi State University which were performed during 1993. Significant progress has been made in the focus areas: chairing the Gammasphere Software Working Group (SWG); assisting with the porting and enhancement of the ORNL UPAK histogramming software package; and developing standard formats for Gammasphere data products. In addition, they have established a new public ftp archive to distribute software and software development tools and information.

  17. Strategies for Developing China's Software Industry

    Directory of Open Access Journals (Sweden)

    Mingzhi Li

    2003-01-01

    Full Text Available The software industry is deemed an ideal target for a developing country to integrate into the world information and communications technology (ICT market. On the one hand the industry is labor intensive, and the developing countries have a large labor surplus; on the other hand, it is a worldwide trend for developed countries to outsource a vast amount of low-end, software-related tasks to the low-cost countries and regions, which fits into some developing countries’ caliber nicely. India has often been cited as the role model for a developing country to tap into the world software market for its continuous success in the software export sector. In comparison, China’s software industry is still negligible in the world despite its sustained high economic growth rate since the economic reform took off in the late 1970s.This paper aims at examining strategies for developing China’s software industry. We use India as a reference because of the similarities of the two countries’ stages of economic development and the clear divergence in their ICT structures and development paths. Although the language barrier has often been singled out as the major obstacle for China’s software exports, we believe the major reasons for its underdevelopment can be ascribed to the following factors. On the national level, the government attention has been skewed toward the hardware sector in the ICT industry, and there is no clear national vision for the strategic direction for the software industry.On the industry and ªrm level, software development has been regarded as the art of individual creativity rather than an engineering process. As a result, the importance of quality and standards, the two important critical factors in software development, have been largely neglected. Perhaps an even more fundamental factor lies in the deeply rooted notion that software is an attachment to the hardware and should be a free product. The lack of intellectual

  18. Software development processes and analysis software: a mismatch and a novel framework

    International Nuclear Information System (INIS)

    Kelly, D.; Harauz, J.

    2011-01-01

    This paper discusses the salient characteristics of analysis software and the impact of those characteristics on its development. From this discussion, it can be seen that mainstream software development processes, usually characterized as Plan Driven or Agile, are built upon assumptions that are mismatched to the development and maintenance of analysis software. We propose a novel software development framework that would match the process normally observed in the development of analysis software. In the discussion of this framework, we suggest areas of research and directions for future work. (author)

  19. Computer-aided software development

    International Nuclear Information System (INIS)

    Teichroew, D.; Hershey, E.A. III; Yamamoto, Y.

    1978-01-01

    In recent years, as the hardware cost/capability ratio has continued to decrease and as much of the routine data processing has been computerized, the emphasis in software development has shifted from just getting systems operational to the maintenance of existing systems, reduction of duplication by integration, selective addition of new applications, systems that are more usable, maintainable, portable and reliable and to improving the productivity of software developers. This paper examines a number of trends that are changing the methods by which software is being produced and used. (Auth.)

  20. Extending the agile development process to develop acceptably secure software

    NARCIS (Netherlands)

    Ben Othmane, L.; Angin, P.; Weffers, H.T.G.; Bhargava, B.

    2013-01-01

    The agile software development approach makes developing secure software challenging. Existing approaches for extending the agile development process, which enables incremental and iterative software development, fall short of providing a method for efficiently ensuring the security of the software

  1. Towards Archetypes-Based Software Development

    Science.gov (United States)

    Piho, Gunnar; Roost, Mart; Perkins, David; Tepandi, Jaak

    We present a framework for the archetypes based engineering of domains, requirements and software (Archetypes-Based Software Development, ABD). An archetype is defined as a primordial object that occurs consistently and universally in business domains and in business software systems. An archetype pattern is a collaboration of archetypes. Archetypes and archetype patterns are used to capture conceptual information into domain specific models that are utilized by ABD. The focus of ABD is on software factories - family-based development artefacts (domain specific languages, patterns, frameworks, tools, micro processes, and others) that can be used to build the family members. We demonstrate the usage of ABD for developing laboratory information management system (LIMS) software for the Clinical and Biomedical Proteomics Group, at the Leeds Institute of Molecular Medicine, University of Leeds.

  2. MEASURING PRODUCTIVITY OF SOFTWARE DEVELOPMENT TEAMS

    Directory of Open Access Journals (Sweden)

    Goparaju Purna Sudhakar

    2012-02-01

    Full Text Available This paper gives an exhaustive literature review of the techniques and models available tomeasure the productivity of software development teams. Definition of productivity, measuringindividual programmer’s productivity, and measuring software development team productivity arediscussed. Based on the literature review it was found that software productivity measurement canbe done using SLOC (Source Lines of Code, function points, use case points, object points, andfeature points. Secondary research findings indicate that the team size, response time, taskcomplexity, team climate and team cohesion have an impact on software development teamproductivity. List of factors affecting the software development team productivity are studied andreviewed.

  3. Insights into software development in Japan

    Science.gov (United States)

    Duvall, Lorraine M.

    1992-01-01

    The interdependence of the U.S.-Japanese economies makes it imperative that we in the United States understand how business and technology developments take place in Japan. We can gain insight into these developments in software engineering by studying the context in which Japanese software is developed, the practices that are used, the problems encountered, the setting surrounding these problems, and the resolution of these problems. Context includes the technological and sociological characteristics of the software development environment, the software processes applied, personnel involved in the development process, and the corporate and social culture surrounding the development. Presented in this paper is a summary of results of a study that addresses these issues. Data for this study was collected during a three month visit to Japan where the author interviewed 20 software managers representing nine companies involved in developing software in Japan. These data are compared to similar data from the United States in which 12 managers from five companies were interviewed.

  4. Happy software developers solve problems better: psychological measurements in empirical software engineering.

    Science.gov (United States)

    Graziotin, Daniel; Wang, Xiaofeng; Abrahamsson, Pekka

    2014-01-01

    For more than thirty years, it has been claimed that a way to improve software developers' productivity and software quality is to focus on people and to provide incentives to make developers satisfied and happy. This claim has rarely been verified in software engineering research, which faces an additional challenge in comparison to more traditional engineering fields: software development is an intellectual activity and is dominated by often-neglected human factors (called human aspects in software engineering research). Among the many skills required for software development, developers must possess high analytical problem-solving skills and creativity for the software construction process. According to psychology research, affective states-emotions and moods-deeply influence the cognitive processing abilities and performance of workers, including creativity and analytical problem solving. Nonetheless, little research has investigated the correlation between the affective states, creativity, and analytical problem-solving performance of programmers. This article echoes the call to employ psychological measurements in software engineering research. We report a study with 42 participants to investigate the relationship between the affective states, creativity, and analytical problem-solving skills of software developers. The results offer support for the claim that happy developers are indeed better problem solvers in terms of their analytical abilities. The following contributions are made by this study: (1) providing a better understanding of the impact of affective states on the creativity and analytical problem-solving capacities of developers, (2) introducing and validating psychological measurements, theories, and concepts of affective states, creativity, and analytical-problem-solving skills in empirical software engineering, and (3) raising the need for studying the human factors of software engineering by employing a multidisciplinary viewpoint.

  5. Secure Software Configuration Management Processes for nuclear safety software development environment

    International Nuclear Information System (INIS)

    Chou, I.-Hsin

    2011-01-01

    Highlights: → The proposed method emphasizes platform-independent security processes. → A hybrid process based on the nuclear SCM and security regulations is proposed. → Detailed descriptions and Process Flow Diagram are useful for software developers. - Abstract: The main difference between nuclear and generic software is that the risk factor is infinitely greater in nuclear software - if there is a malfunction in the safety system, it can result in significant economic loss, physical damage or threat to human life. However, secure software development environment have often been ignored in the nuclear industry. In response to the terrorist attacks on September 11, 2001, the US Nuclear Regulatory Commission (USNRC) revised the Regulatory Guide (RG 1.152-2006) 'Criteria for use of computers in safety systems of nuclear power plants' to provide specific security guidance throughout the software development life cycle. Software Configuration Management (SCM) is an essential discipline in the software development environment. SCM involves identifying configuration items, controlling changes to those items, and maintaining integrity and traceability of them. For securing the nuclear safety software, this paper proposes a Secure SCM Processes (S 2 CMP) which infuses regulatory security requirements into proposed SCM processes. Furthermore, a Process Flow Diagram (PFD) is adopted to describe S 2 CMP, which is intended to enhance the communication between regulators and developers.

  6. An Assessment between Software Development Life Cycle Models of Software Engineering

    OpenAIRE

    Er. KESHAV VERMA; Er. PRAMOD KUMAR; Er. MOHIT KUMAR; Er.GYANESH TIWARI

    2013-01-01

    This research deals with an essential and important subject in Digital world. It is related with the software managing processes that inspect the part of software development during the development models, which are called as software development life cycle. It shows five of the development models namely, waterfall, Iteration, V-shaped, spiral and Extreme programming. These models have advantages and disadvantages as well. So, the main objective of this research is to represent dissimilar mod...

  7. Strategies for successful software development risk management

    Directory of Open Access Journals (Sweden)

    Marija Boban

    2003-01-01

    Full Text Available Nowadays, software is becoming a major part of enterprise business. Software development is activity connected with advanced technology and high level of knowledge. Risks on software development projects must be successfully mitigated to produce successful software systems. Lack of a defined approach to risk management is one of the common causes for project failures. To improve project chances for success, this work investigates common risk impact areas to perceive a foundation that can be used to define a common approach to software risk management. Based on typical risk impact areas on software development projects, we propose three risk management strategies suitable for a broad area of enterprises and software development projects with different amounts of connected risks. Proposed strategies define activities that should be performed for successful risk management, the one that will enable software development projects to perceive risks as soon as possible and to solve problems connected with risk materialization. We also propose a risk-based approach to software development planning and risk management as attempts to address and retire the highest impact risks as early as possible in the development process. Proposed strategies should improve risk management on software development projects and help create a successful software solution.

  8. A development methodology for scientific software

    International Nuclear Information System (INIS)

    Cort, G.; Barrus, D.M.; Goldstone, J.A.; Miller, L.; Nelson, R.O.; Poore, R.V.

    1985-01-01

    We present the details of a software development methodology that addresses all phases of the software life cycle, yet is well suited for application by small projects with limited resources. The methodology has been developed at the Los Alamos Weapons Neutron Research (WNR) Facility and was utilized during the recent development of the WNR Data Acquisition Command Language. The methodology emphasizes the development and maintenance of comprehensive documentation for all software components. The impact of the methodology upon software quality and programmer productivity is assessed

  9. Software Development Standard Processes (SDSP)

    Science.gov (United States)

    Lavin, Milton L.; Wang, James J.; Morillo, Ronald; Mayer, John T.; Jamshidian, Barzia; Shimizu, Kenneth J.; Wilkinson, Belinda M.; Hihn, Jairus M.; Borgen, Rosana B.; Meyer, Kenneth N.; hide

    2011-01-01

    A JPL-created set of standard processes is to be used throughout the lifecycle of software development. These SDSPs cover a range of activities, from management and engineering activities, to assurance and support activities. These processes must be applied to software tasks per a prescribed set of procedures. JPL s Software Quality Improvement Project is currently working at the behest of the JPL Software Process Owner to ensure that all applicable software tasks follow these procedures. The SDSPs are captured as a set of 22 standards in JPL s software process domain. They were developed in-house at JPL by a number of Subject Matter Experts (SMEs) residing primarily within the Engineering and Science Directorate, but also from the Business Operations Directorate and Safety and Mission Success Directorate. These practices include not only currently performed best practices, but also JPL-desired future practices in key thrust areas like software architecting and software reuse analysis. Additionally, these SDSPs conform to many standards and requirements to which JPL projects are beholden.

  10. Lean software development in action

    CERN Document Server

    Janes, Andrea

    2014-01-01

    This book illustrates how goal-oriented, automated measurement can be used to create Lean organizations and to facilitate the development of Lean software, while also demonstrating the practical implementation of Lean software development by combining tried and trusted tools. In order to be successful, a Lean orientation of software development has to go hand in hand with a company's overall business strategy. To achieve this, two interrelated aspects require special attention: measurement and experience management. In this book, Janes and Succi provide the necessary knowledge to establish "

  11. Software development for teleroentgenogram analysis

    Science.gov (United States)

    Goshkoderov, A. A.; Khlebnikov, N. A.; Obabkov, I. N.; Serkov, K. V.; Gajniyarov, I. M.; Aliev, A. A.

    2017-09-01

    A framework for the analysis and calculation of teleroentgenograms was developed. Software development was carried out in the Department of Children's Dentistry and Orthodontics in Ural State Medical University. The software calculates the teleroentgenogram by the original method which was developed in this medical department. Program allows designing its own methods for calculating the teleroentgenograms by new methods. It is planned to use the technology of machine learning (Neural networks) in the software. This will help to make the process of calculating the teleroentgenograms easier because methodological points will be placed automatically.

  12. Educational Software: A Developer's Perspective.

    Science.gov (United States)

    Armstrong, Timothy C.; Loane, Russell F.

    1994-01-01

    Examines the current status and short-term future of computer software development in higher education. Topics discussed include educational advantages of software; current program development techniques, including object oriented programming; and market trends, including IBM versus Macintosh and multimedia programs. (LRW)

  13. SOFTWARE PROCESS IMPROVEMENT: AWARENESS, USE, AND BENEFITS IN CANADIAN SOFTWARE DEVELOPMENT FIRMS

    OpenAIRE

    CHEVERS, DELROY

    2017-01-01

    ABSTRACT Since 1982, the software development community has been concerned with the delivery of quality systems. Software process improvement (SPI) is an initiative to avoid the delivery of low quality systems. However, the awareness and adoption of SPI is low. Thus, this study examines the rate of awareness, use, and benefits of SPI initiatives in Canadian software development firms. Using SPSS as the analytical tool, this study found that 59% of Canadian software development firms are aware...

  14. TOGAF usage in outsourcing of software development

    Directory of Open Access Journals (Sweden)

    Aziz Ahmad Rais

    2013-12-01

    Full Text Available TOGAF is an Enterprise Architecture framework that provides a method for developing Enterprise Architecture called architecture development method (ADM. The purpose of this paper is whether TOGAF ADM can be used for developing software application architecture. Because the software application architecture is one of the disciplines in application development life cycle, it is important to find out how the enterprise architecture development method can support the application architecture development. Having an open standard that can be used in the application architecture development could help in outsourcing of software development. If ADM could be used for software application architecture development, then we could consider its usability in outsourcing of software development.

  15. Six Sigma software development

    CERN Document Server

    Tayntor, Christine B

    2002-01-01

    Since Six Sigma has had marked success in improving quality in other settings, and since the quality of software remains poor, it seems a natural evolution to apply the concepts and tools of Six Sigma to system development and the IT department. Until now however, there were no books available that applied these concepts to the system development process. Six Sigma Software Development fills this void and illustrates how Six Sigma concepts can be applied to all aspects of the evolving system development process. It includes the traditional waterfall model and in the support of legacy systems,

  16. Hospital Management Software Development

    OpenAIRE

    sobogunGod, olawale

    2012-01-01

    The purpose of this thesis was to implement a hospital management software which is suitable for small private hospitals in Nigeria, especially for the ones that use a file based system for storing information rather than having it stored in a more efficient and safer environment like databases or excel programming software. The software developed within this thesis project was specifically designed for the Rainbow specialist hospital which is based in Lagos, the commercial neurological cente...

  17. Understanding flexible and distributed software development processes

    OpenAIRE

    Agerfalk, Par J.; Fitzgerald, Brian

    2006-01-01

    peer-reviewed The minitrack on Flexible and Distributed Software Development Processes addresses two important and partially intertwined current themes in software development: process flexibility and globally distributed software development

  18. Software Quality Perceptions of Stakeholders Involved in the Software Development Process

    Science.gov (United States)

    Padmanabhan, Priya

    2013-01-01

    Software quality is one of the primary determinants of project management success. Stakeholders involved in software development widely agree that quality is important (Barney and Wohlin 2009). However, they may differ on what constitutes software quality, and which of its attributes are more important than others. Although, software quality…

  19. SMART-P MMIS Software Development by Considering the Software License for Nuclear Power Plants and the Development Cost

    International Nuclear Information System (INIS)

    Suh, Yong Suk; Park, Jae Hong; Park, Heui Youn; Son, Ki Sung; Lee, Ki Hyun; Kim, Hyeon Soo

    2005-01-01

    The acceptance criteria of software for safety system functions in NPPs (Nuclear Power Plants) are as follows: 1) acceptable plans should be prepared to control the software development activities, 2) the plans should be followed in an acceptable software life cycle, and 3) the process should produce acceptable design outputs. The KINS (Korea Institute of Nuclear Safety) recommended that the software life cycle should be established based on the IEEE Std 1074 with a supplementary requirement of a software safety analysis. The KINS emphasized that the software should be developed to show its high qualities. This paper identifies the major requirements to achieve the software license from the KINS and presents the major facts reflected in the SMART-P (System-integrated Modular Advanced ReacTor-Pilot) MMIS (Man-Machine Interface Systems) which is being developed by KAERI and targeted to start operation in 2010. This paper also addresses major concerns on the development of a safety critical software and the facts reflected in the SMART-P MMIS

  20. Development of Czech Software for Managing of Cattle Breeding

    Directory of Open Access Journals (Sweden)

    Iveta Novotná

    2016-10-01

    Full Text Available Cattle breeding, a traditional sector of agricultural production, is currently recording a very intensive development caused by the effort of farmers to maximize production and especially their profit. Rapid implementation of new technologies, that help to achieve this goal, cannot be reliably carried out without the use of modern computer and transmission technology controlled by a quality control program. Absence of a similar system on our market led the company Agrosoft to develop a system sorting according to register designed for all types of farming, regardless of the amount of housed animals. The product was created in a Czech company, respects traditional local customs and his undisputable contribution is the subsequent connection to superior organizations operating in the Czech Republic. Complexity of this newly developed product is brought almost to perfection and allows producers to work with the files of needed information fundamentally anywhere and anytime. The new software improves and accelerates the managing work in breeding companies and consequently helps to improve the quality of final products to increase their profitability.

  1. The software development process in worldwide collaborations

    International Nuclear Information System (INIS)

    Amako, K.

    1998-01-01

    High energy physics experiments in future colliders are inevitably large scale international collaborations. In these experiments, software development has to be done by a large number of physicists, software engineers and computer scientists, dispersed all over the world. The major subject of this paper is to discuss on various aspects of software development in the worldwide environment. These include software engineering and methodology, software development process and management. (orig.)

  2. A Software Development Platform for Mechatronic Systems

    DEFF Research Database (Denmark)

    Guan, Wei

    Software has become increasingly determinative for development of mechatronic systems, which underscores the importance of demands for shortened time-to-market, increased productivity, higher quality, and improved dependability. As the complexity of systems is dramatically increasing, these demands...... present a challenge to the practitioners who adopt conventional software development approach. An effective approach towards industrial production of software for mechatronic systems is needed. This approach requires a disciplined engineering process that encompasses model-driven engineering and component......-based software engineering, whereby we enable incremental software development using component models to address the essential design issues of real-time embedded systems. To this end, this dissertation presents a software development platform that provides an incremental model-driven development process based...

  3. Trust in Co-sourced Software Development

    DEFF Research Database (Denmark)

    Schlichter, Bjarne Rerup; Persson, John Stouby

    2014-01-01

    Software development projects are increasingly geographical distributed with offshoring. Co-sourcing is a highly integrative and cohesive approach, seen successful, to software development offshoring. However, research of how dynamic aspects of trust are shaped in co-sourcing activities is limite...... understanding or personal trust relations. The paper suggests how certain work practices among developers and managers can be explained using a dynamic trust lens based on Abstract Systems, especially dis- and re-embedding mechanisms......Software development projects are increasingly geographical distributed with offshoring. Co-sourcing is a highly integrative and cohesive approach, seen successful, to software development offshoring. However, research of how dynamic aspects of trust are shaped in co-sourcing activities is limited...

  4. Reviews in innovative software development

    DEFF Research Database (Denmark)

    Aaen, Ivan; Boelsmand, Jeppe Vestergaard; Jensen, Rasmus

    2009-01-01

    This paper proposes a new review approach for innovative software development. Innovative software development implies that requirements are rarely available as a basis for reviewing and that the purpose of a review is as much to forward additional ideas, as to validate what has been accomplished...

  5. Estimating Rates of Fault Insertion and Test Effectiveness in Software Systems

    Science.gov (United States)

    Nikora, A.; Munson, J.

    1998-01-01

    In developing a software system, we would like to estimate the total number of faults inserted into a software system, the residual fault content of that system at any given time, and the efficacy of the testing activity in executing the code containing the newly inserted faults.

  6. Assessment of best practice of software development in developing ...

    African Journals Online (AJOL)

    ... Understand the technology of the software (4.03), Memory limit set (3.91), Application pool not shared (3.88) and other parameters were examined for software development. The analysis shows the variance of the assessment of best practices in Software development firms and they are in conformity with the global trend.

  7. Automating Object-Oriented Software Development Methods

    NARCIS (Netherlands)

    Tekinerdogan, B.; Saeki, Motoshi; Sunyé, Gerson; van den Broek, P.M.; Hruby, Pavel; Tekinerdogan, B.; van den Broek, P.M.; Saeki, M.; Hruby, P.; Sunye, G.

    2001-01-01

    Current software projects have generally to deal with producing and managing large and complex software products. It is generally believed that applying software development methods are useful in coping with this complexity and for supporting quality. As such numerous object-oriented software

  8. Automating Object-Oriented Software Development Methods

    NARCIS (Netherlands)

    Tekinerdogan, B.; Frohner, A´ kos; Saeki, Motoshi; Sunyé, Gerson; van den Broek, P.M.; Hruby, Pavel

    2002-01-01

    Current software projects have generally to deal with producing and managing large and complex software products. It is generally believed that applying software development methods are useful in coping with this complexity and for supporting quality. As such numerous object-oriented software

  9. Workshop on Developing Safe Software

    International Nuclear Information System (INIS)

    Lawrence, J.D.

    1994-11-01

    The Workshop on Developing Safe Software was held July 22--23, 1992, at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the US Nuclear Regulatory Commission. These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was learned from the workshop

  10. Workshop on developing safe software

    International Nuclear Information System (INIS)

    Lawrence, J.D.

    1992-01-01

    The Workshop on Developing Safe Software was held July 22--23 at the Hotel del Coronado, San Diego, California. The purpose of the workshop was to have four world experts discuss among themselves software safety issues which are of interest to the U. S. Nuclear Regulatory Commission (NRC). These issues concern the development of software systems for use in nuclear power plant protection systems. The workshop comprised four sessions. Wednesday morning, July 22, consisted of presentations from each of the four panel members. On Wednesday afternoon, the panel members went through a list of possible software development techniques and commented on them. The Thursday morning, July 23, session consisted of an extended discussion among the panel members and the observers from the NRC. A final session on Thursday afternoon consisted of a discussion among the NRC observers as to what was teamed from the workshop

  11. Manifesto for the Software Development Professionalization

    Directory of Open Access Journals (Sweden)

    Red Latinoamericana en Ingeniería de Software (RedLatinaIS

    2013-12-01

    Full Text Available One of the central problems of current economic development and industrial competitiveness, social and scientific, is the complexity of large and intensive software systems, and processes for their development and implementation. This complexity is defined by the amount and heterogeneity of the interaction of the hardware with the software components, their inter-relationships, of incorporation of the technical and organizational environments, and the interfaces to humans. The domain of these systems requires actions and scientific thoughts, hierarchical and systematic; also, the success of the products, services and organizations, is increasingly determined by the availability of suitable software products. Therefore, highly qualified professionals, able to understand and master the systems, involved in the entire life cycle of software engineering, and adopt different roles during the development. This is the reason that guide the thinking of this Manifesto , which aims is to achieve the Professionalization of Software Development.

  12. Stimulating Creativity Through Opportunistic Software Development

    NARCIS (Netherlands)

    Z. Obrenovic; D. Gasevic; A. P. W. Eliëns (Anton)

    2008-01-01

    htmlabstractUsing opportunistic software development principles in computer engineering education encourages students to be creative and to develop solutions that cross the boundaries of diverse technologies. A framework for opportunistic software development education helps to create a space in

  13. Stimulating creativity through opportunistic software development

    NARCIS (Netherlands)

    Obrenovic, Z.; Gasevic, D.; Eliëns, A.

    2008-01-01

    Using opportunistic software development principles in computer engineering education encourages students to be creative and to develop solutions that cross the boundaries of diverse technologies. A framework for opportunistic software development education helps to create a space in which students

  14. Software development: do good manners matter?

    Directory of Open Access Journals (Sweden)

    Giuseppe Destefanis

    2016-07-01

    Full Text Available A successful software project is the result of a complex process involving, above all, people. Developers are the key factors for the success of a software development process, not merely as executors of tasks, but as protagonists and core of the whole development process. This paper investigates social aspects among developers working on software projects developed with the support of Agile tools. We studied 22 open-source software projects developed using the Agile board of the JIRA repository. All comments committed by developers involved in the projects were analyzed and we explored whether the politeness of comments affected the number of developers involved and the time required to fix any given issue. Our results showed that the level of politeness in the communication process among developers does have an effect on the time required to fix issues and, in the majority of the analysed projects, it had a positive correlation with attractiveness of the project to both active and potential developers. The more polite developers were, the less time it took to fix an issue.

  15. Application of agile methodologies in software development

    Directory of Open Access Journals (Sweden)

    Jovanović Aca D.

    2016-01-01

    Full Text Available The paper presents the potentials for the development of software using agile methodologies. Special consideration is devoted to the potentials and advantages of use of the Scrum methodology in the development of software and the relationship between the implementation of agile methodologies and the software development projects.

  16. Development and Application of SKSSIM Simulation Software for the Oxygen Bottom Blown Copper Smelting Process

    Directory of Open Access Journals (Sweden)

    Qinmeng Wang

    2017-10-01

    Full Text Available The oxygen bottom blown copper smelting process (SKS process is a newly developed intense smelting process, which has been widely applied to copper production in China. A multiphase equilibrium model for the SKS process was established based on its mechanism characteristics and the principle of Gibbs energy minimization, and an efficient simulation software—SKSSIM (SKS Simulation—was developed based on the model. Industrial data from the SKS process were used to compare with the calculated data from the SKSSIM software. The calculated data on the compositions of slag and matte as well as the distribution ratios of minor elements (such as Pb, Zn, As, Sb and Bi among the slags, mattes and off-gases were in good agreement with the actual plant data. Accordingly, the SKSSIM simulation software has the potentail to be used for the prediction of smelting production and for optimizing the operating parameters of the SKS process.

  17. Next Generation Software Development

    National Research Council Canada - National Science Library

    Manna, Zohar

    2005-01-01

    Under this grant we have studied the development of a scientifically sound basis for software development that builds on widely used pragmatic methods but is firmly grounded in well-established formal...

  18. TMT approach to observatory software development process

    Science.gov (United States)

    Buur, Hanne; Subramaniam, Annapurni; Gillies, Kim; Dumas, Christophe; Bhatia, Ravinder

    2016-07-01

    The purpose of the Observatory Software System (OSW) is to integrate all software and hardware components of the Thirty Meter Telescope (TMT) to enable observations and data capture; thus it is a complex software system that is defined by four principal software subsystems: Common Software (CSW), Executive Software (ESW), Data Management System (DMS) and Science Operations Support System (SOSS), all of which have interdependencies with the observatory control systems and data acquisition systems. Therefore, the software development process and plan must consider dependencies to other subsystems, manage architecture, interfaces and design, manage software scope and complexity, and standardize and optimize use of resources and tools. Additionally, the TMT Observatory Software will largely be developed in India through TMT's workshare relationship with the India TMT Coordination Centre (ITCC) and use of Indian software industry vendors, which adds complexity and challenges to the software development process, communication and coordination of activities and priorities as well as measuring performance and managing quality and risk. The software project management challenge for the TMT OSW is thus a multi-faceted technical, managerial, communications and interpersonal relations challenge. The approach TMT is using to manage this multifaceted challenge is a combination of establishing an effective geographically distributed software team (Integrated Product Team) with strong project management and technical leadership provided by the TMT Project Office (PO) and the ITCC partner to manage plans, process, performance, risk and quality, and to facilitate effective communications; establishing an effective cross-functional software management team composed of stakeholders, OSW leadership and ITCC leadership to manage dependencies and software release plans, technical complexities and change to approved interfaces, architecture, design and tool set, and to facilitate

  19. Developing software for safety-critical applications

    International Nuclear Information System (INIS)

    Chudleigh, M.

    1989-01-01

    The effective implementation of many safety-critical systems involves microprocessors running software which needs to be of very high integrity. This article describes some of the problems of producing such software and the place of software within the total system. A development strategy is proposed based on three principles: the goal of defect-free development, the use of mathematical formalism, and the use of an independent team for testing. (author)

  20. Clinical software for MR imaging system, 4

    International Nuclear Information System (INIS)

    Shimizu, Koji; Kasai, Akira; Okamura, Shoichi

    1992-01-01

    Magnetic resonance imaging continues to elicit new application software through the recent technological advances of MR equipment. This paper describes several applications of our newly developed clinical software. The fast SE sequence (RISE) has proved to reduce routine examination time and to improve image quality, and ultra-fast FE sequence (SMASH) was found to extend the diagnostic capabilities in the field of cardiac study. Diffusion/perfusion imaging achieved in our MR system showed significant promise for providing novel information regarding tissue characterization. Furthermore, Image quality and practicalities of MR angiography have been improved by advanced imaging sequences and sophisticated post-processing software. (author)

  1. Firing Room Remote Application Software Development

    Science.gov (United States)

    Liu, Kan

    2015-01-01

    The Engineering and Technology Directorate (NE) at National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC) is designing a new command and control system for the checkout and launch of Space Launch System (SLS) and future rockets. The purposes of the semester long internship as a remote application software developer include the design, development, integration, and verification of the software and hardware in the firing rooms, in particular with the Mobile Launcher (ML) Launch Accessories (LACC) subsystem. In addition, a software test verification procedure document was created to verify and checkout LACC software for Launch Equipment Test Facility (LETF) testing.

  2. Safety critical software development qualification

    International Nuclear Information System (INIS)

    Marron, J. E.

    2006-01-01

    With the increasing use of digital systems in control applications, customers must acquire appropriate expectations for software development and quality assurance procedures. Purchasers and users of digital systems need to understand the benefits to the supplier of effective quality systems. These systems consist not only of procedures but tools that enable automation. Without the use of automation, quality can not be assured. A software and systems quality program starts with the documents you are very familiar with. But these documents must define more than the final system. They must address specific development environment characteristics and testing capabilities. Starting with the RFP, some of the items that should be introduced are Software Configuration Management, regression testing and defect tracking. The digital system customer is in the best position to enforce the use of software and systems quality programs by including them in project requirements as early as the Purchase Order. The customer's understanding of the full scope and implementation of a software quality program is essential to achieving the quality necessary in nuclear projects, and, incidentally, completing those projects on schedule. (authors)

  3. Workflow-Based Software Development Environment

    Science.gov (United States)

    Izygon, Michel E.

    2013-01-01

    The Software Developer's Assistant (SDA) helps software teams more efficiently and accurately conduct or execute software processes associated with NASA mission-critical software. SDA is a process enactment platform that guides software teams through project-specific standards, processes, and procedures. Software projects are decomposed into all of their required process steps or tasks, and each task is assigned to project personnel. SDA orchestrates the performance of work required to complete all process tasks in the correct sequence. The software then notifies team members when they may begin work on their assigned tasks and provides the tools, instructions, reference materials, and supportive artifacts that allow users to compliantly perform the work. A combination of technology components captures and enacts any software process use to support the software lifecycle. It creates an adaptive workflow environment that can be modified as needed. SDA achieves software process automation through a Business Process Management (BPM) approach to managing the software lifecycle for mission-critical projects. It contains five main parts: TieFlow (workflow engine), Business Rules (rules to alter process flow), Common Repository (storage for project artifacts, versions, history, schedules, etc.), SOA (interface to allow internal, GFE, or COTS tools integration), and the Web Portal Interface (collaborative web environment

  4. Development methodology for the software life cycle process of the safety software

    Energy Technology Data Exchange (ETDEWEB)

    Kim, D. H.; Lee, S. S. [BNF Technology, Taejon (Korea, Republic of); Cha, K. H.; Lee, C. S.; Kwon, K. C.; Han, H. B. [KAERI, Taejon (Korea, Republic of)

    2002-05-01

    A methodology for developing software life cycle processes (SLCP) is proposed to develop the digital safety-critical Engineered Safety Features - Component Control System (ESF-CCS) successfully. A software life cycle model is selected as the hybrid model mixed with waterfall, prototyping, and spiral models and is composed of two stages , development stages of prototype of ESF-CCS and ESF-CCS. To produce the software life cycle (SLC) for the Development of the Digital Reactor Safety System, the Activities referenced in IEEE Std. 1074-1997 are mapped onto the hybrid model. The SLCP is established after the available OPAs (Organizational Process Asset) are applied to the SLC Activities, and the known constraints are reconciled. The established SLCP describes well the software life cycle activities with which the Regulatory Authority provides.

  5. Development methodology for the software life cycle process of the safety software

    International Nuclear Information System (INIS)

    Kim, D. H.; Lee, S. S.; Cha, K. H.; Lee, C. S.; Kwon, K. C.; Han, H. B.

    2002-01-01

    A methodology for developing software life cycle processes (SLCP) is proposed to develop the digital safety-critical Engineered Safety Features - Component Control System (ESF-CCS) successfully. A software life cycle model is selected as the hybrid model mixed with waterfall, prototyping, and spiral models and is composed of two stages , development stages of prototype of ESF-CCS and ESF-CCS. To produce the software life cycle (SLC) for the Development of the Digital Reactor Safety System, the Activities referenced in IEEE Std. 1074-1997 are mapped onto the hybrid model. The SLCP is established after the available OPAs (Organizational Process Asset) are applied to the SLC Activities, and the known constraints are reconciled. The established SLCP describes well the software life cycle activities with which the Regulatory Authority provides

  6. Space and Missile Systems Center Standard: Software Development

    Science.gov (United States)

    2015-01-16

    waterfall development lifecycle models . Source: Adapted from (IEEE 610.12) See (IEEE 1074) for more information. Software ...spiral, and waterfall lifecycle models .) 2. The developer shall record the selected software development lifecycle model (s) in the Software ...through i.e., waterfall , lifecycle model , the following requirements apply with the interpretation that the software is developed as a single build.

  7. A newly developed snack effective for enhancing bone volume

    Directory of Open Access Journals (Sweden)

    Hayashi Hidetaka

    2009-07-01

    Full Text Available Abstract Background The incidence of primary osteoporosis is higher in Japan than in USA and European countries. Recently, the importance of preventive medicine has been gradually recognized in the field of orthopaedic surgery with a concept that peak bone mass should be increased in childhood as much as possible for the prevention of osteoporosis. Under such background, we have developed a new bean snack with an aim to improve bone volume loss. In this study, we examined the effects of a newly developed snack on bone volume and density in osteoporosis model mice. Methods Orchiectomy (ORX and ovariectomy (OVX were performed for C57BL/6J mice of twelve-week-old (Jackson Laboratory, Bar Harbar, ME, USA were used in this experiment. We prepared and given three types of powder diet e.g.: normal calcium diet (NCD, Ca: 0.9%, Clea Japan Co., Tokyo, Japan, low calcium diet (LCD, Ca: 0.63%, Clea Japan Co., and special diet (SCD, Ca: 0.9%. Eighteen weeks after surgery, all the animals were sacrified and prepared for histomorphometric analysis to quantify bone density and bone mineral content. Results As a result of histomorphometric examination, SCD was revealed to enhance bone volume irrespective of age and sex. The bone density was increased significantly in osteoporosis model mice fed the newly developmental snack as compared with the control mice. The bone mineral content was also enhanced significantly. These phenomena were revealed in both sexes. Conclusion It is shown that the newly developed bean snack is highly effective for the improvement of bone volume loss irrespective of sex. We demonstrated that newly developmental snack supplements may be a useful preventive measure for Japanese whose bone mineral density values are less than the ideal condition.

  8. The advanced software development workstation project

    Science.gov (United States)

    Fridge, Ernest M., III; Pitman, Charles L.

    1991-01-01

    The Advanced Software Development Workstation (ASDW) task is researching and developing the technologies required to support Computer Aided Software Engineering (CASE) with the emphasis on those advanced methods, tools, and processes that will be of benefit to support all NASA programs. Immediate goals are to provide research and prototype tools that will increase productivity, in the near term, in projects such as the Software Support Environment (SSE), the Space Station Control Center (SSCC), and the Flight Analysis and Design System (FADS) which will be used to support the Space Shuttle and Space Station Freedom. Goals also include providing technology for development, evolution, maintenance, and operations. The technologies under research and development in the ASDW project are targeted to provide productivity enhancements during the software life cycle phase of enterprise and information system modeling, requirements generation and analysis, system design and coding, and system use and maintenance. On-line user's guides will assist users in operating the developed information system with knowledge base expert assistance.

  9. Applications of the BEam Cross section Analysis Software (BECAS)

    DEFF Research Database (Denmark)

    Blasques, José Pedro Albergaria Amaral; Bitsche, Robert; Fedorov, Vladimir

    2013-01-01

    A newly developed framework is presented for structural design and analysis of long slender beam-like structures, e.g., wind turbine blades. The framework is based on the BEam Cross section Analysis Software – BECAS – a finite element based cross section analysis tool. BECAS is used for the gener......A newly developed framework is presented for structural design and analysis of long slender beam-like structures, e.g., wind turbine blades. The framework is based on the BEam Cross section Analysis Software – BECAS – a finite element based cross section analysis tool. BECAS is used...... for the generation of beam finite element models which correctly account for effects stemming from material anisotropy and inhomogeneity in cross sections of arbitrary geometry. These type of modelling approach allows for an accurate yet computationally inexpensive representation of a general class of three...

  10. Integrating Usability Evaluations into the Software Development Process

    DEFF Research Database (Denmark)

    Lizano, Fulvio

    as relevant and strategic human–computer interaction (HCI) activities in the software development process, there are obstacles that limit the complete, effective and efficient integration of this kind of testing into the software development process. Two main obstacles are the cost of usability evaluations...... and the software developers' resistance to accepting users’ opinions regarding the lack of usability in their software systems. The ‘cost obstacle’ refers to the constraint of conducting usability evaluations in the software process due to the significant amount of resources required by this type of testing. Some......This thesis addresses the integration of usability evaluations into the software development process. The integration here is contextualized in terms of how to include usability evaluation as an activity in the software development lifecycle. Even though usability evaluations are considered...

  11. A systematic approach for component-based software development

    NARCIS (Netherlands)

    Guareis de farias, Cléver; van Sinderen, Marten J.; Ferreira Pires, Luis

    2000-01-01

    Component-based software development enables the construction of software artefacts by assembling prefabricated, configurable and independently evolving building blocks, called software components. This paper presents an approach for the development of component-based software artefacts. This

  12. Learning Human Aspects of Collaborative Software Development

    Science.gov (United States)

    Hadar, Irit; Sherman, Sofia; Hazzan, Orit

    2008-01-01

    Collaboration has become increasingly widespread in the software industry as systems have become larger and more complex, adding human complexity to the technological complexity already involved in developing software systems. To deal with this complexity, human-centric software development methods, such as Extreme Programming and other agile…

  13. Estimating software development project size, using probabilistic ...

    African Journals Online (AJOL)

    Estimating software development project size, using probabilistic techniques. ... of managing the size of software development projects by Purchasers (Clients) and Vendors (Development ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  14. Design for software a playbook for developers

    CERN Document Server

    Klimczak, Erik

    2013-01-01

    A unique resource to help software developers create a desirable user experience Today, top-flight software must feature a desirable user experience. This one-of-a-kind book creates a design process specifically for software, making it easy for developers who lack design background to create that compelling user experience. Appealing to both tech-savvy designers and creative-minded technologists, it establishes a hybrid discipline that will produce first-rate software. Illustrated in full color, it shows how to plan and visualize the design to create software that works on every l

  15. COSINE software development based on code generation technology

    International Nuclear Information System (INIS)

    Ren Hao; Mo Wentao; Liu Shuo; Zhao Guang

    2013-01-01

    The code generation technology can significantly improve the quality and productivity of software development and reduce software development risk. At present, the code generator is usually based on UML model-driven technology, which can not satisfy the development demand of nuclear power calculation software. The feature of scientific computing program was analyzed and the FORTRAN code generator (FCG) based on C# was developed in this paper. FCG can generate module variable definition FORTRAN code automatically according to input metadata. FCG also can generate memory allocation interface for dynamic variables as well as data access interface. FCG was applied to the core and system integrated engine for design and analysis (COSINE) software development. The result shows that FCG can greatly improve the development efficiency of nuclear power calculation software, and reduce the defect rate of software development. (authors)

  16. Resource utilization during software development

    Science.gov (United States)

    Zelkowitz, Marvin V.

    1988-01-01

    This paper discusses resource utilization over the life cycle of software development and discusses the role that the current 'waterfall' model plays in the actual software life cycle. Software production in the NASA environment was analyzed to measure these differences. The data from 13 different projects were collected by the Software Engineering Laboratory at NASA Goddard Space Flight Center and analyzed for similarities and differences. The results indicate that the waterfall model is not very realistic in practice, and that as technology introduces further perturbations to this model with concepts like executable specifications, rapid prototyping, and wide-spectrum languages, we need to modify our model of this process.

  17. Testing Software Development Project Productivity Model

    Science.gov (United States)

    Lipkin, Ilya

    Software development is an increasingly influential factor in today's business environment, and a major issue affecting software development is how an organization estimates projects. If the organization underestimates cost, schedule, and quality requirements, the end results will not meet customer needs. On the other hand, if the organization overestimates these criteria, resources that could have been used more profitably will be wasted. There is no accurate model or measure available that can guide an organization in a quest for software development, with existing estimation models often underestimating software development efforts as much as 500 to 600 percent. To address this issue, existing models usually are calibrated using local data with a small sample size, with resulting estimates not offering improved cost analysis. This study presents a conceptual model for accurately estimating software development, based on an extensive literature review and theoretical analysis based on Sociotechnical Systems (STS) theory. The conceptual model serves as a solution to bridge organizational and technological factors and is validated using an empirical dataset provided by the DoD. Practical implications of this study allow for practitioners to concentrate on specific constructs of interest that provide the best value for the least amount of time. This study outlines key contributing constructs that are unique for Software Size E-SLOC, Man-hours Spent, and Quality of the Product, those constructs having the largest contribution to project productivity. This study discusses customer characteristics and provides a framework for a simplified project analysis for source selection evaluation and audit task reviews for the customers and suppliers. Theoretical contributions of this study provide an initial theory-based hypothesized project productivity model that can be used as a generic overall model across several application domains such as IT, Command and Control

  18. Scientific Software - the role of best practices and recommendations

    Science.gov (United States)

    Fritzsch, Bernadette; Bernstein, Erik; Castell, Wolfgang zu; Diesmann, Markus; Haas, Holger; Hammitzsch, Martin; Konrad, Uwe; Lähnemann, David; McHardy, Alice; Pampel, Heinz; Scheliga, Kaja; Schreiber, Andreas; Steglich, Dirk

    2017-04-01

    In Geosciences - like in most other communities - scientific work strongly depends on software. For big data analysis, existing (closed or open source) program packages are often mixed with newly developed codes. Different versions of software components and varying configurations can influence the result of data analysis. This often makes reproducibility of results and reuse of codes very difficult. Policies for publication and documentation of used and newly developed software, along with best practices, can help tackle this problem. Within the Helmholtz Association a Task Group "Access to and Re-use of scientific software" was implemented by the Open Science Working Group in 2016. The aim of the Task Group is to foster the discussion about scientific software in the Open Science context and to formulate recommendations for the production and publication of scientific software, ensuring open access to it. As a first step, a workshop gathered interested scientists from institutions across Germany. The workshop brought together various existing initiatives from different scientific communities to analyse current problems, share established best practices and come up with possible solutions. The subjects in the working groups covered a broad range of themes, including technical infrastructures, standards and quality assurance, citation of software and reproducibility. Initial recommendations are presented and discussed in the talk. They are the foundation for further discussions in the Helmholtz Association and the Priority Initiative "Digital Information" of the Alliance of Science Organisations in Germany. The talk aims to inform about the activities and to link with other initiatives on the national or international level.

  19. Software Engineering Principles for Courseware Development.

    Science.gov (United States)

    Magel, Kenneth

    1980-01-01

    Courseware (computer based curriculum materials) development should follow the lessons learned by software engineers. The most important of 28 principles of software development presented here include a stress on human readability, the importance of early planning and analysis, the need for independent evaluation, and the need to be flexible.…

  20. Factors negatively influencing knowledge sharing in software development

    Directory of Open Access Journals (Sweden)

    Lucas T. Khoza

    2017-07-01

    Objective: This study seeks to identify factors that negatively influence knowledge sharing in software development in the developing country context. Method: Expert sampling as a subcategory of purposive sampling was employed to extract information, views and opinions from experts in the field of information and communication technology, more specifically from those who are involved in software development projects. Four Johannesburg-based software developing organisations listed on the Johannesburg Stock Exchange (JSE, South Africa, participated in this research study. Quantitative data were collected using an online questionnaire with closed-ended questions. Results: Findings of this research reveal that job security, motivation, time constraints, physiological factors, communication, resistance to change and rewards are core factors negatively influencing knowledge sharing in software developing organisations. Conclusions: Improved understanding of factors negatively influencing knowledge sharing is expected to assist software developing organisations in closing the gap for software development projects failing to meet the triple constraint of time, cost and scope.

  1. Methodology for economic evaluation of software development projects

    International Nuclear Information System (INIS)

    Witte, D.M.

    1990-01-01

    Many oil and gas exploration and production companies develop computer software in-house or with contract programmers to support their exploration activities. Software development projects compete for funding with exploration and development projects, though most companies lack valid comparison measures for the two types of projects. This paper presents a methodology of pro form a cash flow analysis for software development proposals intended for internal use. This methodology, based on estimates of development and support costs, exploration benefits, and probability of successful development and implementation, can be used to compare proposed software development projects directly with competing exploration proposals

  2. Nodule detection by chest X-ray and evaluation of computer-aided detection (CAD) software using an originally developed phantom for instructional purposes

    International Nuclear Information System (INIS)

    Nitta, Norihisa; Takahashi, Masashi; Takazakura, Ryutaro

    2006-01-01

    Chest X-ray and computed tomography (CT) are indispensable modalities for lung cancer examinations. CT technologies have dramatically improved and small nodules and obscure shadows have been detected more frequently. The new generation of radiologists feels that chest X-rays are not as useful as chest CT. Experiments using a newly-developed chest phantom were conducted to reconfirm blind spots in chest X-rays. Recent technological advances and high-definition capability have made chest X-rays more useful than ever. Even though development of multi-detector CT (MDCT) has facilitated detection of nodules, it has conversely incurred a problem of increasing data for analysis, taking tremendous time and effort. Here, employing a chest phantom and clinical samples, we evaluated the utility of two kinds of computer-aided detection (CAD) software (Image Checker CT and LungCARE NEV) as well as GGO CAD software that we have developed. More development of chest CT diagnostic software is urgently needed. (author)

  3. Development of a software for predicting the effects of nuclear and radiological terrorism events in city areas

    International Nuclear Information System (INIS)

    Luo Lijuan; Chen Bo; Zhuo Weihai; Lu Shuyu

    2011-01-01

    Objective: To develop a new software system that can directly display the predicted results on an electronic map, in order to get a directly perceived understanding of the affected areas of nuclear and radiological terrorism events in city areas. Methods: Three scenarios of events including spreading radioactive materials, dirty bomb attack, and explosion or arson attacks on the radiation facilities were assumed. Gaussian diffusion model was employed to predict the spread and deposition of radioactive pollutants, and both the internal and external doses were estimated for the representative person by using the corresponding dose conversion factors. Through integration of the computing system and Mapinfo geographic information system (GIS), the predicted results were visually displayed on the electronic maps of a city. Results: The new software system could visually display the predicted results on the electronic map of a city, and the predicted results were consistent with those calculated by the similar software Hotspot®. The deviation between this system and Hotspot was less than 0.2 km for predicted isoplethic curves of dose rate downwind. Conclusions: The newly developed software system is of the practical value in predicting the effects of nuclear and radiological terrorism events in city areas. (authors)

  4. Usability challenges in an Ethiopian software development organization

    DEFF Research Database (Denmark)

    Teka, Degif; Dittrich, Yvonne; Kifle, Mesfin

    2016-01-01

    Usability and user centered design (UCD) are central to software development. In developing countries, the gap between IT development and the local use situation is larger than in western countries. However, usability is neither well addressed in software practice nor at the policy making level...... in Ethiopia. Software practitioners focus on functional requirements, meeting deadlines and budget. The software development industry in Ethiopia is in its early stage. The article aims at understanding usability practices in an Ethiopian software development company. Developers, system analysts, product...... configuration, their experience, cultural knowledge and common sense regarding the users' situation guided the design. Prototypes and fast delivery of working versions helped in getting user feedback even if early user focus proved to be a challenge as communication between developers and users suffered from...

  5. Fundamentals of multicore software development

    CERN Document Server

    Pankratius, Victor; Tichy, Walter F

    2011-01-01

    With multicore processors now in every computer, server, and embedded device, the need for cost-effective, reliable parallel software has never been greater. By explaining key aspects of multicore programming, Fundamentals of Multicore Software Development helps software engineers understand parallel programming and master the multicore challenge. Accessible to newcomers to the field, the book captures the state of the art of multicore programming in computer science. It covers the fundamentals of multicore hardware, parallel design patterns, and parallel programming in C++, .NET, and Java. It

  6. Understanding Acceptance of Software Metrics--A Developer Perspective

    Science.gov (United States)

    Umarji, Medha

    2009-01-01

    Software metrics are measures of software products and processes. Metrics are widely used by software organizations to help manage projects, improve product quality and increase efficiency of the software development process. However, metrics programs tend to have a high failure rate in organizations, and developer pushback is one of the sources…

  7. Co-sourcing in software development offshoring

    DEFF Research Database (Denmark)

    Schlichter, Bjarne Rerup; Persson, John Stouby

    2013-01-01

    Software development projects are increasingly geographical distributed with offshoring, which introduce complex risks that can lead to project failure. Co-sourcing is a highly integrative and cohesive approach, seen successful, to software development offshoring. However, research of how co......-sourcing shapes the perception and alleviation of common offshoring risks is limited. We present a case study of how a certified CMMI-level 5 Danish software supplier approaches these risks in offshore co-sourcing. The paper explains how common offshoring risks are perceived and alleviated when adopting the co...

  8. Modular Infrastructure for Rapid Flight Software Development

    Science.gov (United States)

    Pires, Craig

    2010-01-01

    This slide presentation reviews the use of modular infrastructure to assist in the development of flight software. A feature of this program is the use of model based approach for application unique software. A review of two programs that this approach was use on are: the development of software for Hover Test Vehicle (HTV), and Lunar Atmosphere and Dust Environment Experiment (LADEE).

  9. Agile distributed software development

    DEFF Research Database (Denmark)

    Persson, John Stouby; Mathiassen, Lars; Aaen, Ivan

    2012-01-01

    While face-to-face interaction is fundamental in agile software development, distributed environments must rely extensively on mediated interactions. Practicing agile principles in distributed environments therefore poses particular control challenges related to balancing fixed vs. evolving quality...... requirements and people vs. process-based collaboration. To investigate these challenges, we conducted an in-depth case study of a successful agile distributed software project with participants from a Russian firm and a Danish firm. Applying Kirsch’s elements of control framework, we offer an analysis of how...

  10. Software Engineering Research/Developer Collaborations in 2005

    Science.gov (United States)

    Pressburger, Tom

    2006-01-01

    In CY 2005, three collaborations between software engineering technology providers and NASA software development personnel deployed three software engineering technologies on NASA development projects (a different technology on each project). The main purposes were to benefit the projects, infuse the technologies if beneficial into NASA, and give feedback to the technology providers to improve the technologies. Each collaboration project produced a final report. Section 2 of this report summarizes each project, drawing from the final reports and communications with the software developers and technology providers. Section 3 indicates paths to further infusion of the technologies into NASA practice. Section 4 summarizes some technology transfer lessons learned. Also included is an acronym list.

  11. Software process improvement: controlling developers, managers or users?

    DEFF Research Database (Denmark)

    Nørbjerg, Jacob

    1999-01-01

    The paper discusses how the latest trend in the management of software development: software process improvement (SPI) may affect user-developer relations. At the outset, SPI concerns the "internal workings" of software organisations, but it may also be interpreted as one way to give the developer...... organisation more control over the development process and the relations with the user organization....

  12. Concept Development for Software Health Management

    Science.gov (United States)

    Riecks, Jung; Storm, Walter; Hollingsworth, Mark

    2011-01-01

    This report documents the work performed by Lockheed Martin Aeronautics (LM Aero) under NASA contract NNL06AA08B, delivery order NNL07AB06T. The Concept Development for Software Health Management (CDSHM) program was a NASA funded effort sponsored by the Integrated Vehicle Health Management Project, one of the four pillars of the NASA Aviation Safety Program. The CD-SHM program focused on defining a structured approach to software health management (SHM) through the development of a comprehensive failure taxonomy that is used to characterize the fundamental failure modes of safety-critical software.

  13. Strategies for Developing China's Software Industry

    OpenAIRE

    Mingzhi Li; Ming Gao

    2003-01-01

    The software industry is deemed an ideal target for a developing country to integrate into the world information and communications technology (ICT) market. On the one hand the industry is labor intensive, and the developing countries have a large labor surplus; on the other hand, it is a worldwide trend for developed countries to outsource a vast amount of low-end, software-related tasks to the low-cost countries and regions, which fits into some developing countries’ caliber nicely. India h...

  14. Software development an open source approach

    CERN Document Server

    Tucker, Allen; de Silva, Chamindra

    2011-01-01

    Overview and Motivation Software Free and Open Source Software (FOSS)Two Case Studies Working with a Project Team Key FOSS Activities Client-Oriented vs. Community-Oriented Projects Working on a Client-Oriented Project Joining a Community-Oriented Project Using Project Tools Collaboration Tools Code Management Tools Run-Time System ConstraintsSoftware Architecture Architectural Patterns Layers, Cohesion, and Coupling Security Concurrency, Race Conditions, and DeadlocksWorking with Code Bad Smells and Metrics Refactoring Testing Debugging Extending the Software for a New ProjectDeveloping the D

  15. Software Development with DevOps

    OpenAIRE

    Kristinsson, Rögnvaldur

    2015-01-01

    The goal of the study was to introduce DevOps in software development, its methods and approaches to software development. I was introduced to the subject by one of my teach-ers, which let me into further studies and researched on the subject and finally choosing it for the study. The subject was completely new to me when I started the study which I found inspirational as I was learning a new and an interesting subject on a daily basis dur-ing the process of writing the study. The materia...

  16. Automated real-time software development

    Science.gov (United States)

    Jones, Denise R.; Walker, Carrie K.; Turkovich, John J.

    1993-01-01

    A Computer-Aided Software Engineering (CASE) system has been developed at the Charles Stark Draper Laboratory (CSDL) under the direction of the NASA Langley Research Center. The CSDL CASE tool provides an automated method of generating source code and hard copy documentation from functional application engineering specifications. The goal is to significantly reduce the cost of developing and maintaining real-time scientific and engineering software while increasing system reliability. This paper describes CSDL CASE and discusses demonstrations that used the tool to automatically generate real-time application code.

  17. Agile Software Development: An Introduction and Overview

    Science.gov (United States)

    Dingsøyr, Torgeir; Dybå, Tore; Moe, Nils Brede

    Agile software development is an important topic in software engineering and information systems. This chapter provides a characterization and definition of agile software development, an overview of research through a summary of existing overview studies, an analysis of the research literature so far, and an introduction to the main themes of this book. The first part of the book provides foundations and background of agile development. The second part describes findings from studies of agile methods in practice. The third part identifies principal challenges and discusses new frontiers that agile development methods will meet in the future.

  18. A Conceptual Framework for Lean Regulated Software Development

    DEFF Research Database (Denmark)

    Cawley, Oisin; Richardson, Ita; Wang, Xiaofeng

    2015-01-01

    for software development within a regulated environment? This poster presents the results of our empirical research into lean and regulated software development. Built from a combination of data sources, we have developed a conceptual framework comprising five primary components. In addition the relationships...... they have with both the central focus of the framework (the situated software development practices) and with each other are indicated....

  19. Global Software Development with Cloud Platforms

    Science.gov (United States)

    Yara, Pavan; Ramachandran, Ramaseshan; Balasubramanian, Gayathri; Muthuswamy, Karthik; Chandrasekar, Divya

    Offshore and outsourced distributed software development models and processes are facing challenges, previously unknown, with respect to computing capacity, bandwidth, storage, security, complexity, reliability, and business uncertainty. Clouds promise to address these challenges by adopting recent advances in virtualization, parallel and distributed systems, utility computing, and software services. In this paper, we envision a cloud-based platform that addresses some of these core problems. We outline a generic cloud architecture, its design and our first implementation results for three cloud forms - a compute cloud, a storage cloud and a cloud-based software service- in the context of global distributed software development (GSD). Our ”compute cloud” provides computational services such as continuous code integration and a compile server farm, ”storage cloud” offers storage (block or file-based) services with an on-line virtual storage service, whereas the on-line virtual labs represent a useful cloud service. We note some of the use cases for clouds in GSD, the lessons learned with our prototypes and identify challenges that must be conquered before realizing the full business benefits. We believe that in the future, software practitioners will focus more on these cloud computing platforms and see clouds as a means to supporting a ecosystem of clients, developers and other key stakeholders.

  20. Usability Evaluation Method for Agile Software Development

    Directory of Open Access Journals (Sweden)

    Saad Masood Butt

    2015-02-01

    Full Text Available Agile methods are the best fit for tremendously growing software industry due to its flexible and dynamic nature. But the software developed using agile methods do meet the usability standards? To answer this question we can see that majority of agile software development projects currently involve interactive user interface designs, which can only be possible by following User Centered Design (UCD in agile methods. The question here is, how to integrate UCD with agile models. Both Agile models and UCD are iterative in nature but agile models focus on coding and development of software; whereas, UCD focuses on user interface of the software. Similarly, both of them have testing features where the agile model involves automated tested code while UCD involves an expert or a user to test the user interface. In this paper, a new agile usability model is proposed and the evaluation is of the proposed model is presented by practically implementing it in three real life projects. . Key results from these projects clearly show: the proposed agile model incorporates usability evaluation methods, improves the relationship between usability experts to work with agile software experts; in addition, allows agile developers to incorporate the result from UCD into subsequent interactions.

  1. Co-sourcing in software development offshoring

    DEFF Research Database (Denmark)

    Schlichter, Bjarne Rerup; Persson, John Stouby

    2013-01-01

    Software development projects are increasingly geographical distributed with offshoring, which introduce complex risks that can lead to project failure. Co-sourcing is a highly integrative and cohesive approach, seen successful, to software development offshoring. However, research of how co-sour......-taking by high attention to of the closely interrelated structure and technology components in terms of CMMI and the actors’ cohesion and integration in terms of Scrum....

  2. Crisis management for software development and knowledge transfer

    CERN Document Server

    Zykov, Sergey V

    2016-01-01

    This well structured book discusses lifecycle optimization of software projects for crisis management by means of software engineering methods and tools. Its outcomes are based on lessons learned from the software engineering crisis which started in the 1960s. The book presents a systematic approach to overcome the crisis in software engineering depends which not only depends on technology-related but also on human-related factors. It proposes an adaptive methodology for software product development, which optimizes the software product lifecycle in order to avoid “local” crises of software production. The general lifecycle pattern and its stages are discussed, and their impact on the time and budget of the software product development is analyzed. The book identifies key advantages and disadvantages for various models selected and concludes that there is no “silver bullet”, or universal model, which suits all software products equally well. It approaches software architecture in terms of process, dat...

  3. The MINERVA Software Development Process

    Science.gov (United States)

    Narkawicz, Anthony; Munoz, Cesar A.; Dutle, Aaron M.

    2017-01-01

    This paper presents a software development process for safety-critical software components of cyber-physical systems. The process is called MINERVA, which stands for Mirrored Implementation Numerically Evaluated against Rigorously Verified Algorithms. The process relies on formal methods for rigorously validating code against its requirements. The software development process uses: (1) a formal specification language for describing the algorithms and their functional requirements, (2) an interactive theorem prover for formally verifying the correctness of the algorithms, (3) test cases that stress the code, and (4) numerical evaluation on these test cases of both the algorithm specifications and their implementations in code. The MINERVA process is illustrated in this paper with an application to geo-containment algorithms for unmanned aircraft systems. These algorithms ensure that the position of an aircraft never leaves a predetermined polygon region and provide recovery maneuvers when the region is inadvertently exited.

  4. Effective Software Engineering Leadership for Development Programs

    Science.gov (United States)

    Cagle West, Marsha

    2010-01-01

    Software is a critical component of systems ranging from simple consumer appliances to complex health, nuclear, and flight control systems. The development of quality, reliable, and effective software solutions requires the incorporation of effective software engineering processes and leadership. Processes, approaches, and methodologies for…

  5. Software Development using Object-First Approach: a New Learning Strategy

    Directory of Open Access Journals (Sweden)

    Gurdeep S Hura

    2017-08-01

    Full Text Available Software Engineering approach deals with the Software Development (SD that is aligned with design and development of software applications. The Software Development may be implemented in a variety of techniques but its implementation using a procedural paradigm and an imperative language seem to be more effective and efficient for the design and implementation of software applications. The procedural approach for Software Development offers advantages as this it may be used to teach some basic features of programming languages. The object of this paper is to introduce the software development and associated object-first approach for the design of software project application using top-down method. This approach defines functions and modules as basic units for the design and implementation and also for offering hands-on experiences with the basics of programming languages of sequences, selections, iterations structures. These structures will be used to define various modules with programming language constructs for of software development process. The software Development process is one of the very crucial processes of software engineering.

  6. The Effects of Development Team Skill on Software Product Quality

    Science.gov (United States)

    Beaver, Justin M.; Schiavone, Guy A.

    2006-01-01

    This paper provides an analysis of the effect of the skill/experience of the software development team on the quality of the final software product. A method for the assessment of software development team skill and experience is proposed, and was derived from a workforce management tool currently in use by the National Aeronautics and Space Administration. Using data from 26 smallscale software development projects, the team skill measures are correlated to 5 software product quality metrics from the ISO/IEC 9126 Software Engineering Product Quality standard. in the analysis of the results, development team skill is found to be a significant factor in the adequacy of the design and implementation. In addition, the results imply that inexperienced software developers are tasked with responsibilities ill-suited to their skill level, and thus have a significant adverse effect on the quality of the software product. Keywords: software quality, development skill, software metrics

  7. Exploring the Role of Social Software in Global Software Development Projects

    DEFF Research Database (Denmark)

    Giuffrida, Rosalba; Dittrich, Y.

    2011-01-01

    We present a PhD project that investigates the use of Social Software (SoSo) in Global Software Development (GSD) teams. Since SoSo in unstructured and informal in its own nature, we explore how informal communication, which is challenging in GSD, is supported by SoSo in distributed teams and how...

  8. Gamification in Software Development Projects

    Directory of Open Access Journals (Sweden)

    Platonova Valērija

    2017-12-01

    Full Text Available Gamification is one of the many ways to motivate employees and introduce more fun in daily activities. The aim of the paper is to analyse the impact of gamification method on the software development projects. The paper contains results of a literature review about application areas of gamification, methods, positive and negative effects on projects. The paper also presents an overview of the gamification tools used in software development projects and attempts to answer the question about benefits of gamification usage: whether gamification in the project leads to the desired results and increases the employee productivity and motivation.

  9. The Social Dynamics of Software Development

    NARCIS (Netherlands)

    Heiskanen, A.; Newman, M.; Simila, J.

    2000-01-01

    A variety of experiences in software development processes between a public sector organisation and several software vendors over a decade-long period are described and interpreted. Three information systems histories are presented as case examples and their analysis is based on detailed insider

  10. Development of a fatigue analysis software system

    International Nuclear Information System (INIS)

    Choi, B. I.; Lee, H. J.; Han, S. W.; Kim, J. Y.; Hwang, K. H.; Kang, J. Y.

    2001-01-01

    A general purpose fatigue analysis software to predict fatigue lives of mechanical components and structures was developed. This software has some characteristic features including functions of searching weak regions on the free surface in order to reduce computing time significantly, a database of fatigue properties for various materials, and an expert system which can assist any users to get more proper results. This software can be used in the environment consists of commercial finite element packages. Using the software developed fatigue analyses for a SAE keyhole specimen and an automobile knuckle were carried out. It was observed that the results were agree well with those from commercial packages

  11. Quality Assurance in Software Development: An Exploratory Investigation in Software Project Failures and Business Performance

    Science.gov (United States)

    Ichu, Emmanuel A.

    2010-01-01

    Software quality is perhaps one of the most sought-after attributes in product development, however; this goal is unattained. Problem factors in software development and how these have affected the maintainability of the delivered software systems requires a thorough investigation. It was, therefore, very important to understand software…

  12. Development of E-learning Software Based Multiplatform Components

    OpenAIRE

    Salamah, Irma; Ganiardi, M. Aris

    2017-01-01

    E-learning software is a product of information and communication technology used to help dynamic and flexible learning process between teacher and student. The software technology was first used in the development of e-learning software in the form of web applications. The advantages of this technology because of the ease in the development, installation, and distribution of data. Along with advances in mobile/wireless electronics technology, e-learning software is adapted to this technology...

  13. Software Development Management: Empirical and Analytical Perspectives

    Science.gov (United States)

    Kang, Keumseok

    2011-01-01

    Managing software development is a very complex activity because it must deal with people, organizations, technologies, and business processes. My dissertation consists of three studies that examine software development management from various perspectives. The first study empirically investigates the impacts of prior experience with similar…

  14. Automating Software Development Process using Fuzzy Logic

    NARCIS (Netherlands)

    Marcelloni, Francesco; Aksit, Mehmet; Damiani, Ernesto; Jain, Lakhmi C.; Madravio, Mauro

    2004-01-01

    In this chapter, we aim to highlight how fuzzy logic can be a valid expressive tool to manage the software development process. We characterize a software development method in terms of two major components: artifact types and methodological rules. Classes, attributes, operations, and inheritance

  15. Mapping subsurface in proximity to newly-developed sinkhole along roadway.

    Science.gov (United States)

    2013-02-01

    MS&T acquired electrical resistivity tomography profiles in immediate proximity to a newly-developed sinkhole in Nixa Missouri : The sinkhole has closed a well-traveled municipal roadway and threatens proximal infrastructure. The intent of this inves...

  16. Process mining software repositories: do developers work as expected?

    NARCIS (Netherlands)

    Poncin, W.; Serebrenik, A.; Brand, van den M.G.J.

    2012-01-01

    Modern software development commonly makes use of a multitude of software repositories. How can these help us to understand the on-going development process? Researchers of Eindhoven University of Technology design new methods revealing how software has been developed.

  17. Management Guidelines for Database Developers' Teams in Software Development Projects

    Science.gov (United States)

    Rusu, Lazar; Lin, Yifeng; Hodosi, Georg

    Worldwide job market for database developers (DBDs) is continually increasing in last several years. In some companies, DBDs are organized as a special team (DBDs team) to support other projects and roles. As a new role, the DBDs team is facing a major problem that there are not any management guidelines for them. The team manager does not know which kinds of tasks should be assigned to this team and what practices should be used during DBDs work. Therefore in this paper we have developed a set of management guidelines, which includes 8 fundamental tasks and 17 practices from software development process, by using two methodologies Capability Maturity Model (CMM) and agile software development in particular Scrum in order to improve the DBDs team work. Moreover the management guidelines developed here has been complemented with practices from authors' experience in this area and has been evaluated in the case of a software company. The management guidelines for DBD teams presented in this paper could be very usefully for other companies too that are using a DBDs team and could contribute towards an increase of the efficiency of these teams in their work on software development projects.

  18. Object-Oriented Software Development Environments

    DEFF Research Database (Denmark)

    The book "Object-Oriented Environments - The Mjølner Approach" presents the collective results of the Mjølner Project. The project was set up to work on the widely recognized problems of developing, maintaining and understanding large software systems. The starting point was to use object...... and realizations User interfaces for environments and realizations Grammar-based software architectures Structure-based editing Language implementation, runtime organization, garbage collection Incremental compilation techniques...

  19. The Relevance of Software Development Education for Students

    Science.gov (United States)

    Liebenberg, Janet; Huisman, Magda; Mentz, Elsa

    2015-01-01

    Despite a widely-acknowledged shortage of software developers, and reports of a gap between industry needs and software education, the possible gap between students' needs and software development education has not been explored in detail. In their university education, students want to take courses and carry out projects that clearly relate to…

  20. Development of Radio Frequency Antenna Radiation Simulation Software

    International Nuclear Information System (INIS)

    Mohamad Idris Taib; Rozaimah Abd Rahim; Noor Ezati Shuib; Wan Saffiey Wan Abdullah

    2014-01-01

    Antennas are widely used national wide for radio frequency propagation especially for communication system. Radio frequency is electromagnetic spectrum from 10 kHz to 300 GHz and non-ionizing. These radiation exposures to human being have radiation hazard risk. This software was under development using LabVIEW for radio frequency exposure calculation. For the first phase of this development, software purposely to calculate possible maximum exposure for quick base station assessment, using prediction methods. This software also can be used for educational purpose. Some results of this software are comparing with commercial IXUS and free ware NEC software. (author)

  1. Teaching Agile Software Development: A Case Study

    Science.gov (United States)

    Devedzic, V.; Milenkovic, S. R.

    2011-01-01

    This paper describes the authors' experience of teaching agile software development to students of computer science, software engineering, and other related disciplines, and comments on the implications of this and the lessons learned. It is based on the authors' eight years of experience in teaching agile software methodologies to various groups…

  2. Managing MDO Software Development Projects

    Science.gov (United States)

    Townsend, J. C.; Salas, A. O.

    2002-01-01

    Over the past decade, the NASA Langley Research Center developed a series of 'grand challenge' applications demonstrating the use of parallel and distributed computation and multidisciplinary design optimization. All but the last of these applications were focused on the high-speed civil transport vehicle; the final application focused on reusable launch vehicles. Teams of discipline experts developed these multidisciplinary applications by integrating legacy engineering analysis codes. As teams became larger and the application development became more complex with increasing levels of fidelity and numbers of disciplines, the need for applying software engineering practices became evident. This paper briefly introduces the application projects and then describes the approaches taken in project management and software engineering for each project; lessons learned are highlighted.

  3. arXiv HEP Software Foundation Community White Paper Working Group - Software Development, Deployment and Validation

    CERN Document Server

    Couturier, Benjamin; Grasland, Hadrien; Hegner, Benedikt; Jouvin, Michel; Kane, Meghan; Katz, Daniel S.; Kuhr, Thomas; Lange, David; Mendez Lorenzo, Patricia; Ritter, Martin; Stewart, Graeme Andrew; Valassi, Andrea

    The High Energy Phyiscs community has developed and needs to maintain many tens of millions of lines of code and to integrate effectively the work of thousands of developers across large collaborations. Software needs to be built, validated, and deployed across hundreds of sites. Software also has a lifetime of many years, frequently beyond that of the original developer, it must be developed with sustainability in mind. Adequate recognition of software development as a critical task in the HEP community needs to be fostered and an appropriate publication and citation strategy needs to be developed. As part of the HEP Softare Foundation's Community White Paper process a working group on Software Development, Deployment and Validation was formed to examine all of these issues, identify best practice and to formulare recommendations for the next decade. Its report is presented here.

  4. The IceCube Data Acquisition Software: Lessons Learned during Distributed, Collaborative, Multi-Disciplined Software Development.

    Energy Technology Data Exchange (ETDEWEB)

    Beattie, Keith S; Beattie, Keith; Day Ph.D., Christopher; Glowacki, Dave; Hanson Ph.D., Kael; Jacobsen Ph.D., John; McParland, Charles; Patton Ph.D., Simon

    2007-09-21

    In this experiential paper we report on lessons learned during the development ofthe data acquisition software for the IceCube project - specifically, how to effectively address the unique challenges presented by a distributed, collaborative, multi-institutional, multi-disciplined project such as this. While development progress in software projects is often described solely in terms of technical issues, our experience indicates that non- and quasi-technical interactions play a substantial role in the effectiveness of large software development efforts. These include: selection and management of multiple software development methodologies, the effective useof various collaborative communication tools, project management structure and roles, and the impact and apparent importance of these elements when viewed through the differing perspectives of hardware, software, scientific and project office roles. Even in areas clearly technical in nature, success is still influenced by non-technical issues that can escape close attention. In particular we describe our experiences on software requirements specification, development methodologies and communication tools. We make observations on what tools and techniques have and have not been effective in this geographically disperse (including the South Pole) collaboration and offer suggestions on how similarly structured future projects may build upon our experiences.

  5. A graphical simulation software for instruction in cardiovascular mechanics physiology

    Directory of Open Access Journals (Sweden)

    Wenger Roland H

    2011-01-01

    Full Text Available Abstract Background Computer supported, interactive e-learning systems are widely used in the teaching of physiology. However, the currently available complimentary software tools in the field of the physiology of cardiovascular mechanics have not yet been adapted to the latest systems software. Therefore, a simple-to-use replacement for undergraduate and graduate students' education was needed, including an up-to-date graphical software that is validated and field-tested. Methods Software compatible to Windows, based on modified versions of existing mathematical algorithms, has been newly developed. Testing was performed during a full term of physiological lecturing to medical and biology students. Results The newly developed CLabUZH software models a reduced human cardiovascular loop containing all basic compartments: an isolated heart including an artificial electrical stimulator, main vessels and the peripheral resistive components. Students can alter several physiological parameters interactively. The resulting output variables are printed in x-y diagrams and in addition shown in an animated, graphical model. CLabUZH offers insight into the relations of volume, pressure and time dependency in the circulation and their correlation to the electrocardiogram (ECG. Established mechanisms such as the Frank-Starling Law or the Windkessel Effect are considered in this model. The CLabUZH software is self-contained with no extra installation required and runs on most of today's personal computer systems. Conclusions CLabUZH is a user-friendly interactive computer programme that has proved to be useful in teaching the basic physiological principles of heart mechanics.

  6. Ethics in computer software design and development

    Science.gov (United States)

    Alan J. Thomson; Daniel L. Schmoldt

    2001-01-01

    Over the past 20 years, computer software has become integral and commonplace for operational and management tasks throughout agricultural and natural resource disciplines. During this software infusion, however, little thought has been afforded human impacts, both good and bad. This paper examines current ethical issues of software system design and development in...

  7. A Study On Traditional And Evolutionary Software Development Models

    Directory of Open Access Journals (Sweden)

    Kamran Rasheed

    2017-07-01

    Full Text Available Today Computing technologies are becoming the pioneers of the organizations and helpful in individual functionality i.e. added to computing device we need to add softwares. Set of instruction or computer program is known as software. The development of software is done through some traditional or some new or evolutionary models. Software development is becoming a key and a successful business nowadays. Without software all hardware is useless. Some collective steps that are performed in the development of these are known as Software development life cycle SDLC. There are some adaptive and predictive models for developing software. Predictive mean already known like WATERFALL Spiral Prototype and V-shaped models while Adaptive model include agile Scrum. All methodologies of both adaptive and predictive have their own procedure and steps. Predictive are Static and Adaptive are dynamic mean change cannot be made to the predictive while adaptive have the capability of changing. The purpose of this study is to get familiar with all these and discuss their uses and steps of development. This discussion will be helpful in deciding which model they should use in which circumstance and what are the development step including in each model.

  8. Supporting Usability Engineering in Small Software Development Organizations

    DEFF Research Database (Denmark)

    Bornoe, Nis; Stage, Jan

    2013-01-01

    Despite an interest and use of different usability engineering methods small software development organizations find it challenging to implement usability engineering into the software development process. We present the results from a study about usability engineering in practice. Through a series...... of semistructured interviews we want to get an understanding of how usability is implemented into the organizations and how it’s practiced in reality. We found that the developers found it problematic to combine agile software development methods with classic usability engineering methods. A lack of solid usability...... engineering expertise and not least experience seems to be a main obstacle for a successful implementation of usability engineering into current software development practices. They are requesting methods and procedures that fit better with their current practices and strategies to implement usability...

  9. Development of a New VLBI Data Analysis Software

    Science.gov (United States)

    Bolotin, Sergei; Gipson, John M.; MacMillan, Daniel S.

    2010-01-01

    We present an overview of a new VLBI analysis software under development at NASA GSFC. The new software will replace CALC/SOLVE and many related utility programs. It will have the capabilities of the current system as well as incorporate new models and data analysis techniques. In this paper we give a conceptual overview of the new software. We formulate the main goals of the software. The software should be flexible and modular to implement models and estimation techniques that currently exist or will appear in future. On the other hand it should be reliable and possess production quality for processing standard VLBI sessions. Also, it needs to be capable of processing observations from a fully deployed network of VLBI2010 stations in a reasonable time. We describe the software development process and outline the software architecture.

  10. Towards a New Paradigm of Software Development: an Ambassador Driven Process in Distributed Software Companies

    Science.gov (United States)

    Kumlander, Deniss

    The globalization of companies operations and competitor between software vendors demand improving quality of delivered software and decreasing the overall cost. The same in fact introduce a lot of problem into software development process as produce distributed organization breaking the co-location rule of modern software development methodologies. Here we propose a reformulation of the ambassador position increasing its productivity in order to bridge communication and workflow gap by managing the entire communication process rather than concentrating purely on the communication result.

  11. The ALMA Common Software as a Basis for a Distributed Software Development

    Science.gov (United States)

    Raffi, Gianni; Chiozzi, Gianluca; Glendenning, Brian

    The Atacama Large Millimeter Array (ALMA) is a joint project involving astronomical organizations in Europe, North America and Japan. ALMA will consist of 64 12-m antennas operating in the millimetre and sub-millimetre wavelength range, with baselines of more than 10 km. It will be located at an altitude above 5000 m in the Chilean Atacama desert. The ALMA Computing group is a joint group with staff scattered on 3 continents and is responsible for all the control and data flow software related to ALMA, including tools ranging from support of proposal preparation to archive access of automatically created images. Early in the project it was decided that an ALMA Common Software (ACS) would be developed as a way to provide to all partners involved in the development a common software platform. The original assumption was that some key middleware like communication via CORBA and the use of XML and Java would be part of the project. It was intended from the beginning to develop this software in an incremental way based on releases, so that it would then evolve into an essential embedded part of all ALMA software applications. In this way we would build a basic unity and coherence into a system that will have been developed in a distributed fashion. This paper evaluates our progress after 1.5 year of work, following a few tests and preliminary releases. It analyzes the advantages and difficulties of such an ambitious approach, which creates an interface across all the various control and data flow applications.

  12. Workshop on Software Development Tools for Petascale Computing

    Energy Technology Data Exchange (ETDEWEB)

    Vetter, Jeffrey [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Georgia Inst. of Technology, Atlanta, GA (United States)

    2007-08-01

    Petascale computing systems will soon be available to the DOE science community. Recent studies in the productivity of HPC platforms point to better software environments as a key enabler to science on these systems. To prepare for the deployment and productive use of these petascale platforms, the DOE science and general HPC community must have the software development tools, such as performance analyzers and debuggers that meet application requirements for scalability, functionality, reliability, and ease of use. In this report, we identify and prioritize the research opportunities in the area of software development tools for high performance computing. To facilitate this effort, DOE hosted a group of 55 leading international experts in this area at the Software Development Tools for PetaScale Computing (SDTPC) Workshop, which was held in Washington, D.C. on August 1 and 2, 2007. Software development tools serve as an important interface between the application teams and the target HPC architectures. Broadly speaking, these roles can be decomposed into three categories: performance tools, correctness tools, and development environments. Accordingly, this SDTPC report has four technical thrusts: performance tools, correctness tools, development environment infrastructures, and scalable tool infrastructures. The last thrust primarily targets tool developers per se, rather than end users. Finally, this report identifies non-technical strategic challenges that impact most tool development. The organizing committee emphasizes that many critical areas are outside the scope of this charter; these important areas include system software, compilers, and I/O.

  13. Towards a Theory of Affect and Software Developers' Performance

    OpenAIRE

    Graziotin, Daniel

    2016-01-01

    For more than thirty years, it has been claimed that a way to improve software developers' productivity and software quality is to focus on people. The underlying assumption seems to be that "happy and satisfied software developers perform better". More specifically, affects-emotions and moods-have an impact on cognitive activities and the working performance of individuals. Development tasks are undertaken heavily through cognitive processes, yet software engineering research (SE) lacks theo...

  14. Software project management tools in global software development: a systematic mapping study.

    Science.gov (United States)

    Chadli, Saad Yasser; Idri, Ali; Ros, Joaquín Nicolás; Fernández-Alemán, José Luis; de Gea, Juan M Carrillo; Toval, Ambrosio

    2016-01-01

    Global software development (GSD) which is a growing trend in the software industry is characterized by a highly distributed environment. Performing software project management (SPM) in such conditions implies the need to overcome new limitations resulting from cultural, temporal and geographic separation. The aim of this research is to discover and classify the various tools mentioned in literature that provide GSD project managers with support and to identify in what way they support group interaction. A systematic mapping study has been performed by means of automatic searches in five sources. We have then synthesized the data extracted and presented the results of this study. A total of 102 tools were identified as being used in SPM activities in GSD. We have classified these tools, according to the software life cycle process on which they focus and how they support the 3C collaboration model (communication, coordination and cooperation). The majority of the tools found are standalone tools (77%). A small number of platforms (8%) also offer a set of interacting tools that cover the software development lifecycle. Results also indicate that SPM areas in GSD are not adequately supported by corresponding tools and deserve more attention from tool builders.

  15. Application of software engineering to development of reactor-safety codes

    International Nuclear Information System (INIS)

    Wilburn, N.P.; Niccoli, L.G.

    1980-11-01

    As a result of the drastically increasing cost of software and the lack of an engineering approach, the technology of Software Engineering is being developed. Software Engineering provides an answer to the increasing cost of developing and maintaining software. It has been applied extensively in the business and aerospace communities and is just now being applied to the development of scientific software and, in particular, to the development of reactor safety codes at HEDL

  16. Advanced software development workstation project: Engineering scripting language. Graphical editor

    Science.gov (United States)

    1992-01-01

    Software development is widely considered to be a bottleneck in the development of complex systems, both in terms of development and in terms of maintenance of deployed systems. Cost of software development and maintenance can also be very high. One approach to reducing costs and relieving this bottleneck is increasing the reuse of software designs and software components. A method for achieving such reuse is a software parts composition system. Such a system consists of a language for modeling software parts and their interfaces, a catalog of existing parts, an editor for combining parts, and a code generator that takes a specification and generates code for that application in the target language. The Advanced Software Development Workstation is intended to be an expert system shell designed to provide the capabilities of a software part composition system.

  17. Pragmatic quality metrics for evolutionary software development models

    Science.gov (United States)

    Royce, Walker

    1990-01-01

    Due to the large number of product, project, and people parameters which impact large custom software development efforts, measurement of software product quality is a complex undertaking. Furthermore, the absolute perspective from which quality is measured (customer satisfaction) is intangible. While we probably can't say what the absolute quality of a software product is, we can determine the relative quality, the adequacy of this quality with respect to pragmatic considerations, and identify good and bad trends during development. While no two software engineers will ever agree on an optimum definition of software quality, they will agree that the most important perspective of software quality is its ease of change. We can call this flexibility, adaptability, or some other vague term, but the critical characteristic of software is that it is soft. The easier the product is to modify, the easier it is to achieve any other software quality perspective. This paper presents objective quality metrics derived from consistent lifecycle perspectives of rework which, when used in concert with an evolutionary development approach, can provide useful insight to produce better quality per unit cost/schedule or to achieve adequate quality more efficiently. The usefulness of these metrics is evaluated by applying them to a large, real world, Ada project.

  18. Architecture design in global and model-centric software development

    NARCIS (Netherlands)

    Heijstek, Werner

    2012-01-01

    This doctoral dissertation describes a series of empirical investigations into representation, dissemination and coordination of software architecture design in the context of global software development. A particular focus is placed on model-centric and model-driven software development.

  19. Introduction of new road pavement response modelling software by means of benchmarking

    CSIR Research Space (South Africa)

    Maina, JW

    2008-07-01

    Full Text Available . Newly developed Finite Element Method for Pavement Analysis (FEMPA) software, which is currently only available for use in a research environment, is also benchmarked against these other packages. The results show that both the GAMES and FEMPA packages...

  20. Direct Integration: Training Software Developers to Conduct Usability Evaluations

    DEFF Research Database (Denmark)

    Skov, Mikael B.; Stage, Jan

    2008-01-01

    is based on an empirical study where 36 teams with a total of 234 first-year university students on software development and design educations were trained in a simple approach for user-based website usability testing that was taught in a 40 hour course. This approach supported them in planning, conducting......Many improvements of the interplay between usability evaluation and software development rely either on better methods for conducting usability evaluations or on better formats for presenting evaluation results in ways that are useful for software designers and developers. Both approaches involve...... a complete division of work between developers and evaluators, which is an undesirable complexity for many software development projects. This paper takes a different approach by exploring to what extent software developers and designers can be trained to carry out their own usability evaluations. The paper...

  1. Ragnarok: An Architecture Based Software Development Environment

    OpenAIRE

    Christensen, Henrik Bærbak

    1999-01-01

    The Ragnarok project is an experimental computer science project within the field of software development environments. Taking current problems in software engineering as starting point, a small set of hypotheses are proposed, outlining plausible solutions for problems concerning the management of the development process and its associated data, and outlining how these solutions can be supported directly in a development environment. These hypotheses are all deeply rooted in the viewpoint tha...

  2. Lean principles applied to software development – avoiding waste

    Directory of Open Access Journals (Sweden)

    Ionel NAFTANAILA

    2009-12-01

    Full Text Available Under the current economic conditions many organizations strive to continue the trend towards adopting better software development processes, in order to take advantage of the numerous benefits that these can offer. Those benefits include quicker return on investment, better software quality, and higher customer satisfaction. To date, however, there is little body of research that can guide organizations in adopting modern software development practices, especially when it comes to Lean thinking and principles. To address this situation, the current paper identifies and structures the main wastes (or muda in Lean terms in software development as described by Lean principles, in an attempt to bring into researchers’ and practitioners’ attention Lean Software Development, a modern development methodology based on well-established practices such as Lean Manufacturing or Toyota Production System.

  3. Ethics and Morality in Software Development: A Developer's Perspective

    Science.gov (United States)

    Stephenson, James H.

    2010-01-01

    Computers and other digital devices have become ubiquitous in our lives. Almost all aspects of our lives are in part or wholly impacted by computers and the software that runs on them. Unknowingly, we are placing our livelihoods and even our lives in the hands unknown software developers. Ethical and moral decisions made during software…

  4. Software Development Methods and Tools: a New Zealand study

    OpenAIRE

    Chris Phillips; Elizabeth Kemp; Duncan Hedderley

    2005-01-01

    This study is a more detailed follow-up to a preliminary investigation of the practices of software engineers in New Zealand. The focus of this study is on the methods and tools used by software developers in their current organisation. The project involved detailed questionnaires being piloted and sent out to several hundred software developers. A central part of the research involved the identification of factors affecting the use and take-up of existing software development tools in the wo...

  5. A Padawan Programmer's Guide to Developing Software Libraries.

    Science.gov (United States)

    Yurkovich, James T; Yurkovich, Benjamin J; Dräger, Andreas; Palsson, Bernhard O; King, Zachary A

    2017-11-22

    With the rapid adoption of computational tools in the life sciences, scientists are taking on the challenge of developing their own software libraries and releasing them for public use. This trend is being accelerated by popular technologies and platforms, such as GitHub, Jupyter, R/Shiny, that make it easier to develop scientific software and by open-source licenses that make it easier to release software. But how do you build a software library that people will use? And what characteristics do the best libraries have that make them enduringly popular? Here, we provide a reference guide, based on our own experiences, for developing software libraries along with real-world examples to help provide context for scientists who are learning about these concepts for the first time. While we can only scratch the surface of these topics, we hope that this article will act as a guide for scientists who want to write great software that is built to last. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. Small is beautiful: customer driven software development

    DEFF Research Database (Denmark)

    Hansen, Henrik A.B.; Koch, Christian; Pleman, Allan

    1999-01-01

    to develop their software. In small software houses operating in markets with complex products such as ERP (enterprise resource planning) systems, networking is necessary in order to gain the needed knowledge and resources in the production development process. Network is not seen as a magic word but leads......Summary form only given. The topics addressed in this paper is how networking can be used as a way for small software houses to enhances their innovative capabilities by using different kinds of collaboration in order to overcome the problems of lacking knowledge as well as resources in order...

  7. Prometheus Reactor I&C Software Development Methodology, for Action

    Energy Technology Data Exchange (ETDEWEB)

    T. Hamilton

    2005-07-30

    The purpose of this letter is to submit the Reactor Instrumentation and Control (I&C) software life cycle, development methodology, and programming language selections and rationale for project Prometheus to NR for approval. This letter also provides the draft Reactor I&C Software Development Process Manual and Reactor Module Software Development Plan to NR for information.

  8. A Padawan Programmer's Guide to Developing Software Libraries

    DEFF Research Database (Denmark)

    Yurkovich, James T.; Yurkovich, Benjamin J.; Dräger, Andreas

    2017-01-01

    /Shiny, that make it easier to develop scientific software and by open-source licenses that make it easier to release software. But how do you build a software library that people will use? And what characteristics do the best libraries have that make them enduringly popular? Here, we provide a reference guide......With the rapid adoption of computational tools in the life sciences, scientists are taking on the challenge of developing their own software libraries and releasing them for public use. This trend is being accelerated by popular technologies and platforms, such as GitHub, Jupyter, R......, based on our own experiences, for developing software libraries along with real-world examples to help provide context for scientists who are learning about these concepts for the first time. While we can only scratch the surface of these topics, we hope that this article will act as a guide...

  9. Becoming Predictably Adaptable in Software Development

    Directory of Open Access Journals (Sweden)

    Michael Vakoc

    2017-10-01

    Full Text Available It’s difficult to state exact timelines in software development and it is even more difficult to say when features that users want will be delivered. We propose changes to current software development methodologies that enable companies to be predictably adaptable and deliver both on time and what customer asked for. We do so through research of current literature, interviews and personal experience working at an international company that builds products for millions of customers and is facing exactly the challenges described above.

  10. Estimation of Remained defects in a Safety-Critical Software using Bayesian Belief Network of Software Development Life Cycle

    International Nuclear Information System (INIS)

    Lee, Seung Jun; Jung, Wondea Jung

    2015-01-01

    Some researchers recognized Bayesian belief network (BBN) method to be a promising method of quantifying software reliability. Brookhaven National Laboratory (BNL) comprehensively reviewed various quantitative software reliability methods to identify the most promising methods for use in probabilistic safety assessments (PSAs) of digital systems of NPPs against a set of the most desirable characteristics developed therein. BBNs are recognized as a promising way of quantifying software reliability and are useful for integrating many aspects of software engineering and quality assurance. The method explicitly incorporates important factors relevant to reliability, such as the quality of the developer, the development process, problem complexity, testing effort, and the operation environment. In this work, a BBN model was developed to estimate the number of remained defects in a safety-critical software based on the quality evaluation of software development life cycle (SDLC). Even though a number of software reliability evaluation methods exist, none of them can be applicable to the safety-critical software in an NPP because software quality in terms of PDF is required for the PSA

  11. Empowering global software development with business intelligence

    OpenAIRE

    Maté Morga, Alejandro; Trujillo Mondéjar, Juan Carlos; García, Félix; Serrano Martín, Manuel; Piattini, Mario

    2016-01-01

    Context: Global Software Development (GSD) allows companies to take advantage of talent spread across the world. Most research has been focused on the development aspect. However, little if any attention has been paid to the management of GSD projects. Studies report a lack of adequate support for management’s decisions made during software development, further accentuated in GSD since information is scattered throughout multiple factories, stored in different formats and standards. Objective...

  12. Adopting to Agile Software Development

    Directory of Open Access Journals (Sweden)

    Linkevics Gusts

    2014-12-01

    Full Text Available Agile software development can be made successful, but there is no well-defined way how to achieve this. The problem is that the successful adoption of agile methods and practices is a complex process and this process should be customizable for a particular organization or a team. This research focuses on identification of agile methods and practices. Result of the research is the ranking of agile methods, practices and their usage trends. As some terms of agile software development are interpreted differently in different organizations and teams, terminology used is analyzed. Results of the research can be used as a reference material for those who are planning to adopt agile methods or are looking for the next agile practice to implement. Results will be used for the development of an expert system to support agile adoption.

  13. Software for Adapting Dspz Receivers to the Uran Interferometer Network

    Science.gov (United States)

    Isaeva, E. A.; Lytvynenko, O. A.; Shepelev, V. A.

    More than 10 years ago, URAN interferometer network (Megn A.V.,1997; Konovalenko A.A., 2014) had been equipped with newly designed receivers with a pass band extended up to 250 kHz and software rejection of interferences (Rashkovskii, 2012). The broadening of bandwidth of received signal increase the sensitivity of the receivers significantly and let us to investigate the angular structure about one hundred radio sources. A software package had been developed that allows: preparing a program of observations, carrying out observations automatically, making data cross-correlation, calculating visibility functions for all pairs of antennae, and fitting models of an angular structure of the sources. Data storage formats were elaborated for each stage of recording or processing. At present, new digital radio astronomy receiver DSPZ have been developed by IRA NASU (Zakharenko, 2016). The receiver allows recording an entire bandwidth of signals of a decameter range from 8 to 32 MHz. It is used at UTR-2 and URAN radio telescopes operated in a single dish mode. Application of the receivers for interferometer observation with the URAN network provides additional advantages in accuracy and sensitivity of studies. In this report we consider the data formats and synchronization methods used in URAN equipment and DSPZ receivers, and discuss algorithms of their transformation. Newly elaborated software is described, that allows selecting a set of frequency bands of signals recorded with DSPZ and converting them to the form used by the URAN software. This approach allows us to carry out the interferometer observations in an the extended frequency range provided by DSPZ and to use as much as possible the software package developed for the URAN network for data reduction.

  14. Development of Flexible Software Process Lines with Variability Operations

    DEFF Research Database (Denmark)

    Schramm, Joachim; Dohrmann, Patrick; Kuhrmann, Marco

    2015-01-01

    families of processes and, as part of this, variability operations provide means to modify and reuse pre-defined process assets. Objective: Our goal is to evaluate the feasibility of variability operations to support the development of flexible software process lines. Method: We conducted a longitudinal......Context: Software processes evolve over time and several approaches were proposed to support the required flexibility. Yet, little is known whether these approaches sufficiently support the development of large software processes. A software process line helps to systematically develop and manage...

  15. SCaN Testbed Software Development and Lessons Learned

    Science.gov (United States)

    Kacpura, Thomas J.; Varga, Denise M.

    2012-01-01

    National Aeronautics and Space Administration (NASA) has developed an on-orbit, adaptable, Software Defined Radio (SDR)Space Telecommunications Radio System (STRS)-based testbed facility to conduct a suite of experiments to advance technologies, reduce risk, and enable future mission capabilities on the International Space Station (ISS). The SCAN Testbed Project will provide NASA, industry, other Government agencies, and academic partners the opportunity to develop and field communications, navigation, and networking technologies in the laboratory and space environment based on reconfigurable, SDR platforms and the STRS Architecture.The SDRs are a new technology for NASA, and the support infrastructure they require is different from legacy, fixed function radios. SDRs offer the ability to reconfigure on-orbit communications by changing software for new waveforms and operating systems to enable new capabilities or fix any anomalies, which was not a previous option. They are not stand alone devices, but required a new approach to effectively control them and flow data. This requires extensive software to be developed to utilize the full potential of these reconfigurable platforms. The paper focuses on development, integration and testing as related to the avionics processor system, and the software required to command, control, monitor, and interact with the SDRs, as well as the other communication payload elements. An extensive effort was required to develop the flight software and meet the NASA requirements for software quality and safety. The flight avionics must be radiation tolerant, and these processors have limited capability in comparison to terrestrial counterparts. A big challenge was that there are three SDRs onboard, and interfacing with multiple SDRs simultaneously complicatesd the effort. The effort also includes ground software, which is a key element for both the command of the payload, and displaying data created by the payload. The verification of

  16. Model Driven Software Development for Agricultural Robotics

    DEFF Research Database (Denmark)

    Larsen, Morten

    The design and development of agricultural robots, consists of both mechan- ical, electrical and software components. All these components must be de- signed and combined such that the overall goal of the robot is fulfilled. The design and development of these systems require collaboration between...... processing, control engineering, etc. This thesis proposes a Model-Driven Software Develop- ment based approach to model, analyse and partially generate the software implementation of a agricultural robot. Furthermore, Guidelines for mod- elling the architecture of an agricultural robots are provided......, assisting with bridging the different engineering disciplines. Timing play an important role in agricultural robotic applications, synchronisation of robot movement and implement actions is important in order to achieve precision spraying, me- chanical weeding, individual feeding, etc. Discovering...

  17. Persona Usage in Software Development: Advantages and Obstacles

    DEFF Research Database (Denmark)

    Billestrup, Jane; Stage, Jan; Nielsen, Lene

    2014-01-01

    The Personas technique has been promoted as a strong tool for providing software developers with a better understanding of the prospective users of their software. This paper reports from a questionnaire survey regarding knowledge about Personas and their usage in software development companies....... The questionnaire survey was conducted in a limited geographical area to establish the extent of Personas usage within all companies in the chosen region and determine whether software development companies used Personas during the development process. Several issues were identified as reasons for either not using...... the technique or for poor application of it. The study showed that 55% of the respondents had never heard about Personas. Among those who had heard about the Personas technique, the following obstacles towards usage of the technique were identified: Lack of knowledge of the technique, lack of resources (time...

  18. Built To Last: Using Iterative Development Models for Sustainable Scientific Software Development

    Science.gov (United States)

    Jasiak, M. E.; Truslove, I.; Savoie, M.

    2013-12-01

    In scientific research, software development exists fundamentally for the results they create. The core research must take focus. It seems natural to researchers, driven by grant deadlines, that every dollar invested in software development should be used to push the boundaries of problem solving. This system of values is frequently misaligned with those of the software being created in a sustainable fashion; short-term optimizations create longer-term sustainability issues. The National Snow and Ice Data Center (NSIDC) has taken bold cultural steps in using agile and lean development and management methodologies to help its researchers meet critical deadlines, while building in the necessary support structure for the code to live far beyond its original milestones. Agile and lean software development and methodologies including Scrum, Kanban, Continuous Delivery and Test-Driven Development have seen widespread adoption within NSIDC. This focus on development methods is combined with an emphasis on explaining to researchers why these methods produce more desirable results for everyone, as well as promoting developers interacting with researchers. This presentation will describe NSIDC's current scientific software development model, how this addresses the short-term versus sustainability dichotomy, the lessons learned and successes realized by transitioning to this agile and lean-influenced model, and the current challenges faced by the organization.

  19. Development of Agile Practices in Romanian Software Community

    Directory of Open Access Journals (Sweden)

    Eduard BUDACU

    2017-01-01

    Full Text Available Agile Software Development (ASD promotes flexibility to change and emphasis the importance of individuals and interactions in producing software. The study presents the development of agile practices in Romanian software community. A literature review is conducted and the main agile methods are described. The characteristics of Romanian ICT sector is presented in relation with agile methodology. Practices are identified by a survey and an analysis on the groups of interests formed on Meetup website is performed. Future directions and development of agile practices is evaluated.

  20. Applying CASE Tools for On-Board Software Development

    Science.gov (United States)

    Brammer, U.; Hönle, A.

    For many space projects the software development is facing great pressure with respect to quality, costs and schedule. One way to cope with these challenges is the application of CASE tools for automatic generation of code and documentation. This paper describes two CASE tools: Rhapsody (I-Logix) featuring UML and ISG (BSSE) that provides modeling of finite state machines. Both tools have been used at Kayser-Threde in different space projects for the development of on-board software. The tools are discussed with regard to the full software development cycle.

  1. Lean Development with the Morpheus Simulation Software

    Science.gov (United States)

    Brogley, Aaron C.

    2013-01-01

    The Morpheus project is an autonomous robotic testbed currently in development at NASA's Johnson Space Center (JSC) with support from other centers. Its primary objectives are to test new 'green' fuel propulsion systems and to demonstrate the capability of the Autonomous Lander Hazard Avoidance Technology (ALHAT) sensor, provided by the Jet Propulsion Laboratory (JPL) on a lunar landing trajectory. If successful, these technologies and lessons learned from the Morpheus testing cycle may be incorporated into a landing descent vehicle used on the moon, an asteroid, or Mars. In an effort to reduce development costs and cycle time, the project employs lean development engineering practices in its development of flight and simulation software. The Morpheus simulation makes use of existing software packages where possible to reduce the development time. The development and testing of flight software occurs primarily through the frequent test operation of the vehicle and incrementally increasing the scope of the test. With rapid development cycles, risk of loss of the vehicle and loss of the mission are possible, but efficient progress in development would not be possible without that risk.

  2. From Software Development to Software Assembly

    NARCIS (Netherlands)

    Sneed, Harry M.; Verhoef, Chris

    2016-01-01

    The lack of skilled programming personnel and the growing burden of maintaining customized software are forcing organizations to quit producing their own software. It's high time they turned to ready-made, standard components to fulfill their business requirements. Cloud services might be one way to

  3. Software Development Methods and Tools: a New Zealand study

    Directory of Open Access Journals (Sweden)

    Chris Phillips

    2005-05-01

    Full Text Available This study is a more detailed follow-up to a preliminary investigation of the practices of software engineers in New Zealand. The focus of this study is on the methods and tools used by software developers in their current organisation. The project involved detailed questionnaires being piloted and sent out to several hundred software developers. A central part of the research involved the identification of factors affecting the use and take-up of existing software development tools in the workplace. The full spectrum of tools from fully integrated I-CASE tools to individual software applications, such as drawing tools was investigated. This paper describes the project and presents the findings.

  4. Software Testing An ISEB Intermediate Certificate

    CERN Document Server

    Hambling, Brian

    2009-01-01

    Covering testing fundamentals, reviews, testing and risk, test management and test analysis, this book helps newly qualified software testers to learn the skills and techniques to take them to the next level. Written by leading authors in the field, this is the only official textbook of the ISEB Intermediate Certificate in Software Testing.

  5. 77 FR 50724 - Developing Software Life Cycle Processes for Digital Computer Software Used in Safety Systems of...

    Science.gov (United States)

    2012-08-22

    ... review of applications for permits and licenses. The DG entitled ``Developing Software Life Cycle... NUCLEAR REGULATORY COMMISSION [NRC-2012-0195] Developing Software Life Cycle Processes for Digital Computer Software Used in Safety Systems of Nuclear Power Plants AGENCY: Nuclear Regulatory Commission...

  6. Educational Affordances and Learning Design in Music Software Development

    Science.gov (United States)

    Cheng, Lee; Leong, Samuel

    2017-01-01

    Although music software has become increasingly affordable and widely adopted in today's classrooms, concerns have been raised about a lack of consideration for users' needs during the software development process. This paper examines intra- and inter-sectoral communication pertaining to software development and music education to shed light on…

  7. Software certification: the history of formation and development

    International Nuclear Information System (INIS)

    Gordon, B.G.

    2016-01-01

    The author describes in detail the history of the creation, formation and development of the software certification system in Russia, determines the prospects and directions for developing the verification and certification of the software for the country's nuclear power industry [ru

  8. Component-based development of software language engineering tools

    NARCIS (Netherlands)

    Ssanyu, J.; Hemerik, C.

    2011-01-01

    In this paper we outline how Software Language Engineering (SLE) could benefit from Component-based Software Development (CBSD) techniques and present an architecture aimed at developing a coherent set of lightweight SLE components, fitting into a general-purpose component framework. In order to

  9. Embracing Open Software Development in Solar Physics

    Science.gov (United States)

    Hughitt, V. K.; Ireland, J.; Christe, S.; Mueller, D.

    2012-12-01

    We discuss two ongoing software projects in solar physics that have adopted best practices of the open source software community. The first, the Helioviewer Project, is a powerful data visualization tool which includes online and Java interfaces inspired by Google Maps (tm). This effort allows users to find solar features and events of interest, and download the corresponding data. Having found data of interest, the user now has to analyze it. The dominant solar data analysis platform is an open-source library called SolarSoft (SSW). Although SSW itself is open-source, the programming language used is IDL, a proprietary language with licensing costs that are prohibative for many institutions and individuals. SSW is composed of a collection of related scripts written by missions and individuals for solar data processing and analysis, without any consistent data structures or common interfaces. Further, at the time when SSW was initially developed, many of the best software development processes of today (mirrored and distributed version control, unit testing, continuous integration, etc.) were not standard, and have not since been adopted. The challenges inherent in developing SolarSoft led to a second software project known as SunPy. SunPy is an open-source Python-based library which seeks to create a unified solar data analysis environment including a number of core datatypes such as Maps, Lightcurves, and Spectra which have consistent interfaces and behaviors. By taking advantage of the large and sophisticated body of scientific software already available in Python (e.g. SciPy, NumPy, Matplotlib), and by adopting many of the best practices refined in open-source software development, SunPy has been able to develop at a very rapid pace while still ensuring a high level of reliability. The Helioviewer Project and SunPy represent two pioneering technologies in solar physics - simple yet flexible data visualization and a powerful, new data analysis environment. We

  10. Evidence synthesis software.

    Science.gov (United States)

    Park, Sophie Elizabeth; Thomas, James

    2018-06-07

    It can be challenging to decide which evidence synthesis software to choose when doing a systematic review. This article discusses some of the important questions to consider in relation to the chosen method and synthesis approach. Software can support researchers in a range of ways. Here, a range of review conditions and software solutions. For example, facilitating contemporaneous collaboration across time and geographical space; in-built bias assessment tools; and line-by-line coding for qualitative textual analysis. EPPI-Reviewer is a review software for research synthesis managed by the EPPI-centre, UCL Institute of Education. EPPI-Reviewer has text mining automation technologies. Version 5 supports data sharing and re-use across the systematic review community. Open source software will soon be released. EPPI-Centre will continue to offer the software as a cloud-based service. The software is offered via a subscription with a one-month (extendible) trial available and volume discounts for 'site licences'. It is free to use for Cochrane and Campbell reviews. The next EPPI-Reviewer version is being built in collaboration with National Institute for Health and Care Excellence using 'surveillance' of newly published research to support 'living' iterative reviews. This is achieved using a combination of machine learning and traditional information retrieval technologies to identify the type of research each new publication describes and determine its relevance for a particular review, domain or guideline. While the amount of available knowledge and research is constantly increasing, the ways in which software can support the focus and relevance of data identification are also developing fast. Software advances are maximising the opportunities for the production of relevant and timely reviews. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise

  11. Patterns in Software Development

    DEFF Research Database (Denmark)

    Corry, Aino Vonge

    the university and I entered a project to industry within Center for Object Technology (COT). I focused on promoting the pattern concept to the Danish software industry in order to help them take advantage of the benefits of applying patterns in system development. In the obligatory stay abroad, I chose to visit...

  12. Clinical experience of quantex coordinate software for CT guided stereotactic surgery

    International Nuclear Information System (INIS)

    Yabashi, Toshitake; Ichikawa, Hideo; Yasuda, Eisuke; Tsuruta, Hatsuo; Ishikawa, Yoshihisa; Kimura, Tokuji; Kanamori, Isao

    1991-01-01

    Recently, Quantex Coordinate Software was newly developed for CT-guided stereotactic surgery. We have the opportunity of using this software in 6 cases with intracerebral hematoma for evacuation and 2 cases with brain tumor for needle biopsy by using CT-guided stereotactic surgery. The followings are the features with a little clinical experience. One of the biggest features is that this software can simulate the best expected route of the puncture needle from burr hole to target point before inserting. Also compared with CT 9000 series Software, it has many new functions for more advanced hardware as well as advance standard software. Two cases of intracerebral hematoma for evacuation and 1 case of a brain tumor for a biopsy were carried out using this software mainly as a simulation. In all cases, this software proved to be very useful. (author)

  13. Software development tools using GPGPU potentialities

    International Nuclear Information System (INIS)

    Dudnik, V.A.; Kudryavtsev, V.I.; Sereda, T.M.; Us, S.A.; Shestakov, M.V.

    2011-01-01

    The paper deals with potentialities of various up-to-date software development tools for making use of graphic processor (GPU) parallel computing resources. Examples are given to illustrate the use of present-day software tools for the development of applications and realization of algorithms for scientific-technical calculations performed by GPGPU. The paper presents some classes of hard mathematical problems of scientific-technical calculations, for which the GPGPU can be efficiently used. is possible. To reduce the time of calculation program development with the use of GPGPU capabilities, various dedicated programming systems and problem-oriented subroutine libraries are recommended. Performance parameters when solving the problems with and without the use of GPGPU potentialities are compared.

  14. Software development with C++ maximizing reuse with object technology

    CERN Document Server

    Nielsen, Kjell

    2014-01-01

    Software Development with C++: Maximizing Reuse with Object Technology is about software development and object-oriented technology (OT), with applications implemented in C++. The basis for any software development project of complex systems is the process, rather than an individual method, which simply supports the overall process. This book is not intended as a general, all-encompassing treatise on OT. The intent is to provide practical information that is directly applicable to a development project. Explicit guidelines are offered for the infusion of OT into the various development phases.

  15. A study on methodological of software development for HEP

    International Nuclear Information System (INIS)

    Ding Yuzheng; Dai Guiliang

    1999-01-01

    The HEP related software system is a large one. It comprises mainly detector simulation software, DAQ software and offline system. The author discusses the advantages of OO object oriented methodologies applying to such software system, and the basic strategy for the usage of OO methodologies, languages and tools in the development of the HEP related software are given

  16. Developing a software for removable partial denture design: Part II: Introduction of RPD graph software

    Directory of Open Access Journals (Sweden)

    Nejatidanesh F

    2007-06-01

    Full Text Available Background and Aim: Designing removable partial dentures is one of the most important phases of prosthetic treatments. Computer can be used to facilitate and increase accuracy of removable partial denture design. The aim of this study was to develop a software for removable partial denture design.Materials and Methods: A questionnaire (discussed in part I and major textbooks, were used to determine the design rules.  The software (RPD Graph was developed using Visual C++ and Maryam program. The RPD Graph can determine the classification of partial edentulous arch. With defining the missing teeth and providing data about prognosis and conditions of abutment teeth, the removable partial design will be developed by RPD Graph. This software is a knowledge-based system which has specific characteristics. It can be used as an educational tool for teaching RPD design and as a clinical tool for supporting clinician's decision. In addition it can be developed to more complete softwares.

  17. Applying Quality Costs in a Software Development Environment

    Directory of Open Access Journals (Sweden)

    I.P. Hollingsworth

    1999-05-01

    Full Text Available This paper shows how Quality Costs can be a measure of software quality. The relationship between Quality Costs and other software quality metrics is briefly explained, and software development oriented versions of the two principal Quality Cost models are described. Finally the paper discusses the major issues involved in setting up a software Quality Cost programme. The concepts are based on previous research on Quality Costs in manufacturing, coupled with work on software metrics and the work currently being undertaken by the authors in a number of industries.

  18. Post-Modern Software Development

    Science.gov (United States)

    Filman, Robert E.

    2005-01-01

    The history of software development includes elements of art, science, engineering, and fashion(though very little manufacturing). In all domains, old ideas give way or evolve to new ones: in the fine arts, the baroque gave way to rococo, romanticism, modernism, postmodernism, and so forth. What is the postmodern programming equivalent? That is, what comes after object orientation?

  19. Epistemic Communities, Situated Learning and Open Source Software Development

    DEFF Research Database (Denmark)

    Edwards, Kasper

    2001-01-01

    This paper analyses open source software (OSS) development as an epistemic community where each individual project is perceived as a single epistemic community. OSS development is a learning process where the involved parties contribute to, and learn from the community. It is discovered that theory...... of epistemic communities does indeed contribute to the understanding of open source software development. But, the important learning process of open source software development is not readily explained. The paper then introduces situated learning and legitimate peripheral participation as theoretical...

  20. Dependability modeling and assessment in UML-based software development.

    Science.gov (United States)

    Bernardi, Simona; Merseguer, José; Petriu, Dorina C

    2012-01-01

    Assessment of software nonfunctional properties (NFP) is an important problem in software development. In the context of model-driven development, an emerging approach for the analysis of different NFPs consists of the following steps: (a) to extend the software models with annotations describing the NFP of interest; (b) to transform automatically the annotated software model to the formalism chosen for NFP analysis; (c) to analyze the formal model using existing solvers; (d) to assess the software based on the results and give feedback to designers. Such a modeling→analysis→assessment approach can be applied to any software modeling language, be it general purpose or domain specific. In this paper, we focus on UML-based development and on the dependability NFP, which encompasses reliability, availability, safety, integrity, and maintainability. The paper presents the profile used to extend UML with dependability information, the model transformation to generate a DSPN formal model, and the assessment of the system properties based on the DSPN results.

  1. Open source software development : some historical perspectives

    NARCIS (Netherlands)

    Nuvolari, A.

    2005-01-01

    In this paper we suggest that historical studies of technology can help us to account for some, perplexing (at least for traditional economic reasoning) features of open source software development. From a historical perspective, open source software seems to be a particular case of what Robert C.

  2. Open source software development : some historical perspectives

    NARCIS (Netherlands)

    Nuvolari, A.

    2003-01-01

    In this paper we suggest that historical studies of technology can help us to account for some, perplexing (at least for traditional economic reasoning) features of open source software development. When looked in historical perspective, open source software seems to be a particular case of what

  3. Application of software engineering to development of reactor safety codes

    International Nuclear Information System (INIS)

    Wilburn, N.P.; Niccoli, L.G.

    1981-01-01

    Software Engineering, which is a systematic methodology by which a large scale software development project is partitioned into manageable pieces, has been applied to the development of LMFBR safety codes. The techniques have been applied extensively in the business and aerospace communities and have provided an answer to the drastically increasing cost of developing and maintaining software. The five phases of software engineering (Survey, Analysis, Design, Implementation, and Testing) were applied in turn to development of these codes, along with Walkthroughs (peer review) at each stage. The application of these techniques has resulted in SUPERIOR SOFTWARE which is well documented, thoroughly tested, easy to modify, easier to use and maintain. The development projects have resulted in lower overall cost. (orig.) [de

  4. High acceptability of a newly developed urological practical skills training program.

    NARCIS (Netherlands)

    Vries, A.H. de; Luijk, S.J. van; Scherpbier, A.J.J.A.; Hendrikx, A.J.M.; Koldewijn, E.L.; Wagner, C.; Schout, B.M.A.

    2015-01-01

    Background: Benefits of simulation training are widely recognized, but its structural implementation into urological curricula remains challenging. This study aims to gain insight into current and ideal urological practical skills training and presents the outline of a newly developed skills

  5. High acceptability of a newly developed urological practical skills training program

    NARCIS (Netherlands)

    de Vries, A.H.; van Luijk, S.J.; Scherpbier, A.J.J.A.; Hendrikx, A.J.M.; Koldewijn, E.L.; Wagner, C.; Schout, B.M.A.

    2015-01-01

    Background: Benefits of simulation training are widely recognized, but its structural implementation into urological curricula remains challenging. This study aims to gain insight into current and ideal urological practical skills training and presents the outline of a newly developed skills

  6. New technologies for supporting real-time on-board software development

    Science.gov (United States)

    Kerridge, D.

    1995-03-01

    The next generation of on-board data management systems will be significantly more complex than current designs, and will be required to perform more complex and demanding tasks in software. Improved hardware technology, in the form of the MA31750 radiation hard processor, is one key component in addressing the needs of future embedded systems. However, to complement these hardware advances, improved support for the design and implementation of real-time data management software is now needed. This will help to control the cost and risk assoicated with developing data management software development as it becomes an increasingly significant element within embedded systems. One particular problem with developing embedded software is managing the non-functional requirements in a systematic way. This paper identifies how Logica has exploited recent developments in hard real-time theory to address this problem through the use of new hard real-time analysis and design methods which can be supported by specialized tools. The first stage in transferring this technology from the research domain to industrial application has already been completed. The MA37150 Hard Real-Time Embedded Software Support Environment (HESSE) is a loosely integrated set of hardware and software tools which directly support the process of hard real-time analysis for software targeting the MA31750 processor. With further development, this HESSE promises to provide embedded system developers with software tools which can reduce the risks associated with developing complex hard real-time software. Supported in this way by more sophisticated software methods and tools, it is foreseen that MA31750 based embedded systems can meet the processing needs for the next generation of on-board data management systems.

  7. An Ontology for a TripTych Formal Software Development

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2003-01-01

    An ontology, ie., a formalised set of strongly interrelated definitions, is given for an approach to software development that spans domain engineering, requirements engineering and software design - and which is otherwise based on a judicious use of both informal and formal, mathematics-based te......An ontology, ie., a formalised set of strongly interrelated definitions, is given for an approach to software development that spans domain engineering, requirements engineering and software design - and which is otherwise based on a judicious use of both informal and formal, mathematics...

  8. Agile Software Development in the Department of Defense Environment

    Science.gov (United States)

    2017-03-31

    traditional project/program life cycle (i.e., waterfall ). In the traditional model , security requirements are not evaluated until development is...2015), which may better facilitate adoption of Agile software development in the DoD. Several models are provided for software-dominant and software...the DoD has historically used a traditional, waterfall approach for acquiring systems and services), and oversight requirements that are

  9. The Relationship of Personality Models and Development Tasks in Software Engineering

    OpenAIRE

    Wiesche, Manuel;Krcmar, Helmut

    2015-01-01

    Understanding the personality of software developers has been an ongoing topic in software engineering research. Software engineering researchers applied different theoretical models to understand software developers? personalities to better predict software developers? performance, orchestrate more effective and motivated teams, and identify the person that fits a certain job best. However, empirical results were found as contradicting, challenging validity, and missing guidance for IT perso...

  10. DEVELOPING EVALUATION INSTRUMENT FOR MATHEMATICS EDUCATIONAL SOFTWARE

    Directory of Open Access Journals (Sweden)

    Wahyu Setyaningrum

    2012-02-01

    Full Text Available The rapid increase and availability of mathematics software, either for classroom or individual learning activities, presents a challenge for teachers. It has been argued that many products are limited in quality. Some of the more commonly used software products have been criticized for poor content, activities which fail to address some learning issues, poor graphics presentation, inadequate documentation, and other technical problems. The challenge for schools is to ensure that the educational software used in classrooms is appropriate and effective in supporting intended outcomes and goals. This paper aimed to develop instrument for evaluating mathematics educational software in order to help teachers in selecting the appropriate software. The instrument considers the notion of educational including content, teaching and learning skill, interaction, and feedback and error correction; and technical aspects of educational software including design, clarity, assessment and documentation, cost and hardware and software interdependence. The instrument use a checklist approach, the easier and effective methods in assessing the quality of educational software, thus the user needs to put tick in each criteria. The criteria in this instrument are adapted and extended from standard evaluation instrument in several references.   Keywords: mathematics educational software, educational aspect, technical aspect.

  11. Final Report. Center for Scalable Application Development Software

    Energy Technology Data Exchange (ETDEWEB)

    Mellor-Crummey, John [Rice Univ., Houston, TX (United States)

    2014-10-26

    The Center for Scalable Application Development Software (CScADS) was established as a part- nership between Rice University, Argonne National Laboratory, University of California Berkeley, University of Tennessee – Knoxville, and University of Wisconsin – Madison. CScADS pursued an integrated set of activities with the aim of increasing the productivity of DOE computational scientists by catalyzing the development of systems software, libraries, compilers, and tools for leadership computing platforms. Principal Center activities were workshops to engage the research community in the challenges of leadership computing, research and development of open-source software, and work with computational scientists to help them develop codes for leadership computing platforms. This final report summarizes CScADS activities at Rice University in these areas.

  12. Order and chaos in agile software development: a comparison of two software development teams in a major IT company

    OpenAIRE

    Wang, Xiaofeng; Vidgen, Richard

    2007-01-01

    peer-reviewed Agile methods have emerged and become popular over last few years as a response to shortcomings of the waterfall process model. However, agile processes are stamped by some as chaotic processes and are placed in opposition to waterfall approaches. This paper uses the edge of chaos concept from complex adaptive systems theory as a theoretical lens to analyse the roles of structure and planning in the software development process. The software development processes ...

  13. Benefits of reverse engineering technologies in software development makerspace

    Directory of Open Access Journals (Sweden)

    Aabidi M.H.

    2017-01-01

    Full Text Available In the recent decades, the amount of data produced by scientific, engineering, and life science applications has increased with several orders of magnitude. In parallel with this development, the applications themselves have become increasingly complex in terms of functionality, structure, and behavior. In the same time, development and production cycles of such applications exhibit a tendency of becoming increasingly shorter, due to factors such as market pressure and rapid evolution of supporting and enabling technologies. As a consequence, an increasing fraction of the cost of creating new applications and manufacturing processes shifts from the creation of new artifacts to the adaption of existing ones. A key component of this activity is the understanding of the design, operation, and behavior of existing manufactured artifacts, such as software code bases, hardware systems, and mechanical assemblies. For instance, in the software industry, it is estimated that maintenance costs exceed 80% of the total costs of a software product's lifecycle, and software understanding accounts for as much as half of these maintenance costs. To facilitate the software development process, it would be ideal to have tools that automatically generate or help to generate UML (Unified Modeling Language models from source code. Reverse engineering the software architecture from source code provides a valuable service to software practitioners. Case tools implementing MDA and reverse-engineering constitute an important opportunity of software development engineers. So MDA and reverse engineering is an important key witch make makerspace more productive and more efficient.

  14. A newly developed spinal simulator.

    Science.gov (United States)

    Chester, R; Watson, M J

    2000-11-01

    A number of studies indicate poor intra-therapist and inter-therapist reliability in the performance of graded, passive oscillatory movements to the lumbar spine. However, it has been suggested that therapists can be trained to be more consistent in their performance of these techniques if given reliable quantitative feedback. The intention of this study was to develop equipment, analogous to the lumbar spine that could be used for both teaching and research purposes. Equipment has been updated and connected to a personal IBM compatible computer. Custom designed software allows concurrent and accurate feedback to students on their performance and in a form suitable for advanced data analysis using statistical packages. The uses and implications of this equipment are discussed. Copyright 2000 Harcourt Publishers Ltd.

  15. METHOD FOR SECURITY SPECIFICATION SOFTWARE REQUIREMENTS AS A MEANS FOR IMPLEMENTING A SOFTWARE DEVELOPMENT PROCESS SECURE - MERSEC

    Directory of Open Access Journals (Sweden)

    Castro Mecías, L.T.

    2015-06-01

    Full Text Available Often security incidents that have the object or use the software as a means of causing serious damage and legal, economic consequences, etc. Results of a survey by Kaspersky Lab reflectvulnerabilities in software are the main cause of security incidents in enterprises, the report shows that 85% of them have reported security incidents and vulnerabilities in software are the main reason is further estimated that incidents can cause significant losses estimated from 50,000 to $ 649.000. (1 In this regard academic and industry research focuses on proposals based on reducing vulnerabilities and failures of technology, with a positive influence on how the software is developed. A development process for improved safety practices and should include activities from the initial phases of the software; so that security needs are identified, manage risk and appropriate measures are implemented. This article discusses a method of analysis, acquisition and requirements specification of the software safety analysis on the basis of various proposals and deficiencies identified from participant observation in software development teams. Experiments performed using the proposed yields positive results regarding the reduction of security vulnerabilities and compliance with the safety objectives of the software.

  16. Architecture independent environment for developing engineering software on MIMD computers

    Science.gov (United States)

    Valimohamed, Karim A.; Lopez, L. A.

    1990-01-01

    Engineers are constantly faced with solving problems of increasing complexity and detail. Multiple Instruction stream Multiple Data stream (MIMD) computers have been developed to overcome the performance limitations of serial computers. The hardware architectures of MIMD computers vary considerably and are much more sophisticated than serial computers. Developing large scale software for a variety of MIMD computers is difficult and expensive. There is a need to provide tools that facilitate programming these machines. First, the issues that must be considered to develop those tools are examined. The two main areas of concern were architecture independence and data management. Architecture independent software facilitates software portability and improves the longevity and utility of the software product. It provides some form of insurance for the investment of time and effort that goes into developing the software. The management of data is a crucial aspect of solving large engineering problems. It must be considered in light of the new hardware organizations that are available. Second, the functional design and implementation of a software environment that facilitates developing architecture independent software for large engineering applications are described. The topics of discussion include: a description of the model that supports the development of architecture independent software; identifying and exploiting concurrency within the application program; data coherence; engineering data base and memory management.

  17. A new paradigm for the development of analysis software

    International Nuclear Information System (INIS)

    Kelly, D.; Harauz, J.

    2012-01-01

    For the CANDU industry, analysis software is an important tool for scientists and engineers to examine issues related to safety, operation, and design. However, the software quality assurance approach currently used for these tools assumes the software is the delivered product. In this paper, we present a model that shifts the emphasis from software being the end-product to software being support for the end-product, the science. We describe a novel software development paradigm that supports this shift and provides the groundwork for re-examining the quality assurance practices used for analysis software. (author)

  18. WILDFIRE IGNITION RESISTANCE ESTIMATOR WIZARD SOFTWARE DEVELOPMENT REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, M.; Robinson, C.; Gupta, N.; Werth, D.

    2012-10-10

    This report describes the development of a software tool, entitled “WildFire Ignition Resistance Estimator Wizard” (WildFIRE Wizard, Version 2.10). This software was developed within the Wildfire Ignition Resistant Home Design (WIRHD) program, sponsored by the U. S. Department of Homeland Security, Science and Technology Directorate, Infrastructure Protection & Disaster Management Division. WildFIRE Wizard is a tool that enables homeowners to take preventive actions that will reduce their home’s vulnerability to wildfire ignition sources (i.e., embers, radiant heat, and direct flame impingement) well in advance of a wildfire event. This report describes the development of the software, its operation, its technical basis and calculations, and steps taken to verify its performance.

  19. Patterns of Software Development Process

    Directory of Open Access Journals (Sweden)

    Sandro Javier Bolaños Castro

    2011-12-01

    Full Text Available "Times New Roman","serif";mso-fareast-font-family:"Times New Roman";mso-ansi-language:EN-US;mso-fareast-language:EN-US;mso-bidi-language:AR-SA">This article presents a set of patterns that can be found to perform best practices in software processes that are directly related to the problem of implementing the activities of the process, the roles involved, the knowledge generated and the inputs and outputs belonging to the process. In this work, a definition of the architecture is encouraged by using different recurrent configurations that strengthen the process and yield efficient results for the development of a software project. The patterns presented constitute a catalog, which serves as a vocabulary for communication among project participants [1], [2], and also can be implemented through software tools, thus facilitating patterns implementation [3]. Additionally, a tool that can be obtained under GPL (General Public license is provided for this purpose

  20. Prometheus Reactor I and C Software Development Methodology, for Action

    International Nuclear Information System (INIS)

    T. Hamilton

    2005-01-01

    The purpose of this letter is to submit the Reactor Instrumentation and Control (I and C) software life cycle, development methodology, and programming language selections and rationale for project Prometheus to NR for approval. This letter also provides the draft Reactor I and C Software Development Process Manual and Reactor Module Software Development Plan to NR for information

  1. Engineering software development with HyperCard

    Science.gov (United States)

    Darko, Robert J.

    1990-01-01

    The successful and unsuccessful techniques used in the development of software using HyperCard are described. The viability of the HyperCard for engineering is evaluated and the future use of HyperCard by this particular group of developers is discussed.

  2. Trust in agile teams in distributed software development

    DEFF Research Database (Denmark)

    Tjørnehøj, Gitte; Fransgård, Mette; Skalkam, Signe

    2012-01-01

    Distributed software development (DSD) is becoming everyday practice in the software market. Difficult challenges and difficulty reaching the expected benefits are well documented. Recently agile software development has become common in DSD, even though important incompatibilities between...... that leads to team success. This article reports from a study of two agile DSD teams with very different organization and collaboration patterns. It addresses the role of trust and distrust in DSD by analyzing how the team members’ trust developed and erode through the lifetime of the two collaborations...... and how management actions influenced this. We find that some agile practice can empower teams to take over responsibility for managing their own trust building and sustaining and that management neglect of trust-building in other situations can hinder the development of beneficial balanced agile DSD...

  3. Study on Risk Approaches in Software Development Projects

    Directory of Open Access Journals (Sweden)

    Claudiu BRANDAS

    2012-01-01

    Full Text Available Risk approaches in project development led to the integration in the IT project management methodologies and software development of activities and processes of risk management. The diversity and the advanced level of the used technologies in IT projects with increasing com-plexity leads to an exponential diversification of risk factors.The purpose of this research is to identify the level of the risk approach in IT projects both at the IT project management and software development methodologies level and the level of the perception of IT project man-agers, IT managers and IT analysts in Romanian IT companies. Thus, we want to determine the correlation between the use of a project management or software development methodology and the overall level of risk perceived by the project managers using these methodologies.

  4. Development of Efficient Authoring Software for e-Learning Contents

    Science.gov (United States)

    Kozono, Kazutake; Teramoto, Akemi; Akiyama, Hidenori

    The contents creation in e-Learning system becomes an important problem. The contents of e-Learning should include figure and voice media for a high-level educational effect. However, the use of figure and voice complicates the operation of authoring software considerably. A new authoring software, which can build e-Learning contents efficiently, has been developed to solve this problem. This paper reports development results of the authoring software.

  5. Using scenario based programming to develop embedded control software

    NARCIS (Netherlands)

    Bettiol, F.

    2015-01-01

    A new paradigm to develop embedded software is waking up the interest of companies. Its name is Scenario Based Programming and it claims to be a good approach to develop embedded software. Live Sequence Charts (LSC), a visual language supporting the paradigm, enables the developers to specify a

  6. Monitoring Student Activity in Collaborative Software Development

    DEFF Research Database (Denmark)

    Dietsch, Daniel; Podelski, Andreas; Nam, Jaechang

    2013-01-01

    year of studies formed 20 groups and worked collaboratively to develop video games. Throughout the lab, students have to use a variety of tools for managing and developing their projects, such as software version control, static analysis tools, wikis, mailing lists, etc. The students are also supported......This paper presents data analysis from a course on Software Engineering in an effort to identify metrics and techniques that would allow instructor to act proactively and identify patterns of low engagement and inefficient peer collaboration. Over the last two terms, 106 students in their second...... by weekly meetings with teaching assistants and instructors regarding group progress, code quality, and management issues. Through these meetings and their interactions with the software tools, students leave a detailed trace of data related to their individual engagement and their collaboration behavior...

  7. Automating the management of software projects in a developing IT ...

    African Journals Online (AJOL)

    The resultant network-based software tool was developed on object-oriented technology using Java. The study established that good management practices may still be applied by the Nigerian software industry that lacks expertise in software management. Multi-site development approach facilitates large projects by using ...

  8. Guidance and Control Software Project Data - Volume 2: Development Documents

    Science.gov (United States)

    Hayhurst, Kelly J. (Editor)

    2008-01-01

    The Guidance and Control Software (GCS) project was the last in a series of software reliability studies conducted at Langley Research Center between 1977 and 1994. The technical results of the GCS project were recorded after the experiment was completed. Some of the support documentation produced as part of the experiment, however, is serving an unexpected role far beyond its original project context. Some of the software used as part of the GCS project was developed to conform to the RTCA/DO-178B software standard, "Software Considerations in Airborne Systems and Equipment Certification," used in the civil aviation industry. That standard requires extensive documentation throughout the software development life cycle, including plans, software requirements, design and source code, verification cases and results, and configuration management and quality control data. The project documentation that includes this information is open for public scrutiny without the legal or safety implications associated with comparable data from an avionics manufacturer. This public availability has afforded an opportunity to use the GCS project documents for DO-178B training. This report provides a brief overview of the GCS project, describes the 4-volume set of documents and the role they are playing in training, and includes the development documents from the GCS project. Volume 2 contains three appendices: A. Guidance and Control Software Development Specification; B. Design Description for the Pluto Implementation of the Guidance and Control Software; and C. Source Code for the Pluto Implementation of the Guidance and Control Software

  9. RAVEN AS A TOOL FOR DYNAMIC PROBABILISTIC RISK ASSESSMENT: SOFTWARE OVERVIEW

    Energy Technology Data Exchange (ETDEWEB)

    Alfonsi Andrea; Mandelli Diego; Rabiti Cristian; Joshua Cogliati; Robert Kinoshita

    2013-05-01

    RAVEN is a software tool under development at the Idaho National Laboratory (INL) that acts as the control logic driver and post-processing tool for the newly developed Thermo-Hydraylic code RELAP- 7. The scope of this paper is to show the software structure of RAVEN and its utilization in connection with RELAP-7. A short overview of the mathematical framework behind the code is presented along with its main capabilities such as on-line controlling/monitoring and Monte-Carlo sampling. A demo of a Station Black Out PRA analysis of a simplified Pressurized Water Reactor (PWR) model is shown in order to demonstrate the Monte-Carlo and clustering capabilities.

  10. International Collaboration in the Development of NPP Software

    International Nuclear Information System (INIS)

    Jiang, S.; Liu, L.; Yu, H.

    2015-01-01

    In this paper, we first review the progress and current status of international collaboration and technical exchange in the development of nuclear power plant (NPP) software by The State Nuclear Power Software Development Center (SNPSDC) in China. Then we discuss the importance of the international collaboration and exchange in the trend of globalisation of NPP technology. We also identify the role and contribution of professional women in this process. SNPSDC, the first professional software development centre for NPP in China, has been developing COSINE — a self-reliance NPP design and analysis software product with China brand—since 2010. Through participating in OECD/NEA’s joint projects, such as ROSA-2 Project, PKL–3 Project, HYMERES Project and ATLAS Project, SNPSDC shared data with other countries involved with respect to particular areas, such as high quality reactor thermal hydraulics test data. SNPSDC’s engineers have also been actively participating in international technical and research exchange for presenting their innovative work to the community while learning from peers. Our record shows that over 30 papers have been presented in international conferences with respect to nuclear reactor thermal hydraulics, safety analysis, reactor physics and software engineering within the past 4 years. The above international collaboration and technical exchange helped SNPSDC’s engineers to keep up with the state-of-art technology in this field. The large amount of valuable experimental data transferred to SNPSDC ensured the functionality, usability and reliability of software while greatly reduced the cost and shortened the cycle of development. Female engineers and other employees of SNPSDC either drove or got actively involved in a lot of aspects of the above collaboration and exchange, such as technical communication, business negotiation and overseas affairs management. These professional women played an irreplaceable role in this project by

  11. Agile Scientists? : Investigating Agile Practices in Scientific Software Development

    OpenAIRE

    Sletholt, Magnus Thorstein

    2011-01-01

    The topic of this master thesis is development of scientific software. The research questions put forth are oriented towards specific agile practices and whether these are present in the development processes of scientific software projects. Moreover, the effects of applying such agile practices, particularly pertaining to the handling of requirements and testing, in scientific software projects are addressed in the thesis. In order to answer the proposed research questions a table consisting...

  12. Overview of software development at the parabolic dish test site

    Science.gov (United States)

    Miyazono, C. K.

    1985-01-01

    The development history of the data acquisition and data analysis software is discussed. The software development occurred between 1978 and 1984 in support of solar energy module testing at the Jet Propulsion Laboratory's Parabolic Dish Test Site, located within Edwards Test Station. The development went through incremental stages, starting with a simple single-user BASIC set of programs, and progressing to the relative complex multi-user FORTRAN system that was used until the termination of the project. Additional software in support of testing is discussed including software in support of a meteorological subsystem and the Test Bed Concentrator Control Console interface. Conclusions and recommendations for further development are discussed.

  13. COMPARATIVE ANALYSIS OF SOFTWARE DEVELOPMENT MODELS

    OpenAIRE

    Sandeep Kaur*

    2017-01-01

    No geek is unfamiliar with the concept of software development life cycle (SDLC). This research deals with the various SDLC models covering waterfall, spiral, and iterative, agile, V-shaped, prototype model. In the modern era, all the software systems are fallible as they can’t stand with certainty. So, it is tried to compare all aspects of the various models, their pros and cons so that it could be easy to choose a particular model at the time of need

  14. Clinical software development for the Web: lessons learned from the BOADICEA project.

    Science.gov (United States)

    Cunningham, Alex P; Antoniou, Antonis C; Easton, Douglas F

    2012-04-10

    In the past 20 years, society has witnessed the following landmark scientific advances: (i) the sequencing of the human genome, (ii) the distribution of software by the open source movement, and (iii) the invention of the World Wide Web. Together, these advances have provided a new impetus for clinical software development: developers now translate the products of human genomic research into clinical software tools; they use open-source programs to build them; and they use the Web to deliver them. Whilst this open-source component-based approach has undoubtedly made clinical software development easier, clinical software projects are still hampered by problems that traditionally accompany the software process. This study describes the development of the BOADICEA Web Application, a computer program used by clinical geneticists to assess risks to patients with a family history of breast and ovarian cancer. The key challenge of the BOADICEA Web Application project was to deliver a program that was safe, secure and easy for healthcare professionals to use. We focus on the software process, problems faced, and lessons learned. Our key objectives are: (i) to highlight key clinical software development issues; (ii) to demonstrate how software engineering tools and techniques can facilitate clinical software development for the benefit of individuals who lack software engineering expertise; and (iii) to provide a clinical software development case report that can be used as a basis for discussion at the start of future projects. We developed the BOADICEA Web Application using an evolutionary software process. Our approach to Web implementation was conservative and we used conventional software engineering tools and techniques. The principal software development activities were: requirements, design, implementation, testing, documentation and maintenance. The BOADICEA Web Application has now been widely adopted by clinical geneticists and researchers. BOADICEA Web

  15. Ragnarok: An Architecture Based Software Development Environment

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    of the development process. The main contributions presented in the thesis have evolved from work with two of the hypotheses: These address the problems of management of evolution, and overview, comprehension and navigation respectively. The first main contribution is the Architectural Software Configuration...... Management Model: A software configuration management model where the abstractions and hierarchy of the logical aspect of software architecture forms the basis for version control and configuration management. The second main contribution is the Geographic Space Architecture Visualisation Model......: A visualisation model where entities in a software architecture are organised geographically in a two-dimensional plane, their visual appearance determined by processing a subset of the data in the entities, and interaction with the project's underlying data performed by direct manipulation of the landscape...

  16. Software development on the DIII-D control and data acquisition computers

    International Nuclear Information System (INIS)

    Penaflor, B.G.; McHarg, B.B. Jr.; Piglowski, D.

    1997-11-01

    The various software systems developed for the DIII-D tokamak have played a highly visible and important role in tokamak operations and fusion research. Because of the heavy reliance on in-house developed software encompassing all aspects of operating the tokamak, much attention has been given to the careful design, development and maintenance of these software systems. Software systems responsible for tokamak control and monitoring, neutral beam injection, and data acquisition demand the highest level of reliability during plasma operations. These systems made up of hundreds of programs totaling thousands of lines of code have presented a wide variety of software design and development issues ranging from low level hardware communications, database management, and distributed process control, to man machine interfaces. The focus of this paper will be to describe how software is developed and managed for the DIII-D control and data acquisition computers. It will include an overview and status of software systems implemented for tokamak control, neutral beam control, and data acquisition. The issues and challenges faced developing and managing the large amounts of software in support of the dynamic and everchanging needs of the DIII-D experimental program will be addressed

  17. Improving the Software Development Process Using Testability Research

    Science.gov (United States)

    Voas, Jeffrey M.; Miller, Keith W.

    1991-01-01

    Software testability is the the tendency of code to reveal existing faults during random testing. This paper proposes to take software testability predictions into account throughout the development process. These predictions can be made from formal specifications, design documents, and the code itself. The insight provided by software testability is valuable during design, coding, testing, and quality assurance. We further believe that software testability analysis can play a crucial role in quantifying the likelihood that faults are not hiding after testing does not result in any failures for the current version.

  18. A META-COMPOSITE SOFTWARE DEVELOPMENT APPROACH FOR TRANSLATIONAL RESEARCH

    Science.gov (United States)

    Sadasivam, Rajani S.; Tanik, Murat M.

    2013-01-01

    Translational researchers conduct research in a highly data-intensive and continuously changing environment and need to use multiple, disparate tools to achieve their goals. These researchers would greatly benefit from meta-composite software development or the ability to continuously compose and recompose tools together in response to their ever-changing needs. However, the available tools are largely disconnected, and current software approaches are inefficient and ineffective in their support for meta-composite software development. Building on the composite services development approach, the de facto standard for developing integrated software systems, we propose a concept-map and agent-based meta-composite software development approach. A crucial step in composite services development is the modeling of users’ needs as processes, which can then be specified in an executable format for system composition. We have two key innovations. First, our approach allows researchers (who understand their needs best) instead of technicians to take a leadership role in the development of process models, reducing inefficiencies and errors. A second innovation is that our approach also allows for modeling of complex user interactions as part of the process, overcoming the technical limitations of current tools. We demonstrate the feasibility of our approach using a real-world translational research use case. We also present results of usability studies evaluating our approach for future refinements. PMID:23504436

  19. A meta-composite software development approach for translational research.

    Science.gov (United States)

    Sadasivam, Rajani S; Tanik, Murat M

    2013-06-01

    Translational researchers conduct research in a highly data-intensive and continuously changing environment and need to use multiple, disparate tools to achieve their goals. These researchers would greatly benefit from meta-composite software development or the ability to continuously compose and recompose tools together in response to their ever-changing needs. However, the available tools are largely disconnected, and current software approaches are inefficient and ineffective in their support for meta-composite software development. Building on the composite services development approach, the de facto standard for developing integrated software systems, we propose a concept-map and agent-based meta-composite software development approach. A crucial step in composite services development is the modeling of users' needs as processes, which can then be specified in an executable format for system composition. We have two key innovations. First, our approach allows researchers (who understand their needs best) instead of technicians to take a leadership role in the development of process models, reducing inefficiencies and errors. A second innovation is that our approach also allows for modeling of complex user interactions as part of the process, overcoming the technical limitations of current tools. We demonstrate the feasibility of our approach using a real-world translational research use case. We also present results of usability studies evaluating our approach for future refinements.

  20. Worldwide collaborative efforts in plasma control software development

    International Nuclear Information System (INIS)

    Penaflor, B.G.; Ferron, J.R.; Walker, M.L.; Humphreys, D.A.; Leuer, J.A.; Piglowski, D.A.; Johnson, R.D.; Xiao, B.J.; Hahn, S.H.; Gates, D.A.

    2008-01-01

    This presentation will describe the DIII-D collaborations with various tokamak experiments throughout the world which have adapted custom versions of the DIII-D plasma control system (PCS) software for their own use. Originally developed by General Atomics for use on the DIII-D tokamak, the PCS has been successfully installed and used for the NSTX experiment in Princeton, the MAST experiment in Culham UK, the EAST experiment in China, and the Pegasus experiment in the University of Wisconsin. In addition to these sites, a version of the PCS is currently being developed for use by the KSTAR tokamak in Korea. A well-defined and robust PCS software infrastructure has been developed to provide a common foundation for implementing the real-time data acquisition and feedback control codes. The PCS infrastructure provides a flexible framework that has allowed the PCS to be easily adapted to fulfill the unique needs of each site. The software has also demonstrated great flexibility in allowing for different computing, data acquisition and real-time networking hardware to be used. A description of the current PCS software architecture will be given along with experiences in developing and supporting the various PCS installations throughout the world

  1. XP in a Small Software Development Business

    DEFF Research Database (Denmark)

    Babb, Jeffry; Hoda, Rashina; Nørbjerg, Jacob

    2014-01-01

    While small software development shops have trended towards the adoption of Agile methods, local conditions and high iteration pressure typically cause adaptations and appropriations of Agile methods. This paper shares evidence from a study concerning how a small software development company adopts...... and adapts, XP to suit their business. Based on a Dialogical Action Research project, the study reflects on the conditions leading to Agile process adaptation, and why ad hoc and “a la carte” approaches may be problematic. Limitations and drawbacks to aspects of XP are also discussed. The Agile practices...

  2. Application of software to development of reactor-safety codes

    International Nuclear Information System (INIS)

    Wilburn, N.P.; Niccoli, L.G.

    1980-09-01

    Over the past two-and-a-half decades, the application of new techniques has reduced hardware cost for digital computer systems and increased computational speed by several orders of magnitude. A corresponding cost reduction in business and scientific software development has not occurred. The same situation is seen for software developed to model the thermohydraulic behavior of nuclear systems under hypothetical accident situations. For all cases this is particularly noted when costs over the total software life cycle are considered. A solution to this dilemma for reactor safety code systems has been demonstrated by applying the software engineering techniques which have been developed over the course of the last few years in the aerospace and business communities. These techniques have been applied recently with a great deal of success in four major projects at the Hanford Engineering Development Laboratory (HEDL): 1) a rewrite of a major safety code (MELT); 2) development of a new code system (CONACS) for description of the response of LMFBR containment to hypothetical accidents, and 3) development of two new modules for reactor safety analysis

  3. What happens when software developers are (un)happy

    OpenAIRE

    Graziotin, Daniel; Fagerholm, Fabian; Wang, Xiaofeng; Abrahamsson, Pekka

    2017-01-01

    The growing literature on affect among software developers mostly reports on the linkage between happiness, software quality, and developer productivity. Understanding happiness and unhappiness in all its components -- positive and negative emotions and moods -- is an attractive and important endeavor. Scholars in industrial and organizational psychology have suggested that understanding happiness and unhappiness could lead to cost-effective ways of enhancing working conditions, job performan...

  4. Toward an Agile Approach to Managing the Effect of Requirements on Software Architecture during Global Software Development

    OpenAIRE

    Alsahli, Abdulaziz; Khan, Hameed; Alyahya, Sultan

    2016-01-01

    Requirement change management (RCM) is a critical activity during software development because poor RCM results in occurrence of defects, thereby resulting in software failure. To achieve RCM, efficient impact analysis is mandatory. A common repository is a good approach to maintain changed requirements, reusing and reducing effort. Thus, a better approach is needed to tailor knowledge for better change management of requirements and architecture during global software development (GSD).The o...

  5. Development of micro pattern cutting simulation software

    International Nuclear Information System (INIS)

    Lee, Jong Min; Song, Seok Gyun; Choi, Jeong Ju; Novandy, Bondhan; Kim, Su Jin; Lee, Dong Yoon; Nam, Sung Ho; Je, Tae Jin

    2008-01-01

    The micro pattern machining on the surface of wide mold is not easy to be simulated by conventional software. In this paper, a software is developed for micro pattern cutting simulation. The 3d geometry of v-groove, rectangular groove, pyramid and pillar patterns are visualized by c++ and OpenGL library. The micro cutting force is also simulated for each pattern

  6. Section 508 Electronic Information Accessibility Requirements for Software Development

    Science.gov (United States)

    Ellis, Rebecca

    2014-01-01

    Section 508 Subpart B 1194.21 outlines requirements for operating system and software development in order to create a product that is accessible to users with various disabilities. This portion of Section 508 contains a variety of standards to enable those using assistive technology and with visual, hearing, cognitive and motor difficulties to access all information provided in software. The focus on requirements was limited to the Microsoft Windows® operating system as it is the predominant operating system used at this center. Compliance with this portion of the requirements can be obtained by integrating the requirements into the software development cycle early and by remediating issues in legacy software if possible. There are certain circumstances with software that may arise necessitating an exemption from these requirements, such as design or engineering software using dynamically changing graphics or numbers to convey information. These exceptions can be discussed with the Section 508 Coordinator and another method of accommodation used.

  7. Modeling of a 3DTV service in the software-defined networking architecture

    Science.gov (United States)

    Wilczewski, Grzegorz

    2014-11-01

    In this article a newly developed concept towards modeling of a multimedia service offering stereoscopic motion imagery is presented. Proposed model is based on the approach of utilization of Software-defined Networking or Software Defined Networks architecture (SDN). The definition of 3D television service spanning SDN concept is identified, exposing basic characteristic of a 3DTV service in a modern networking organization layout. Furthermore, exemplary functionalities of the proposed 3DTV model are depicted. It is indicated that modeling of a 3DTV service in the Software-defined Networking architecture leads to multiplicity of improvements, especially towards flexibility of a service supporting heterogeneity of end user devices.

  8. Control of research oriented software development

    International Nuclear Information System (INIS)

    Lewis, L.C.; Dronkers, J.J.; Pitsker, B.

    1985-12-01

    The Nuclear Waste Policy Act of 1982 directs the Department of Energy (DOE) to dispose permanently high level radioactive waste and civilian spent nuclear fuel by January 31, 1998. DOE has responded by creating an organizational structure that directs all the activities necessary to carry out the legislative demands. LLNL is conducting research in the earth sciences and is developing some unique computer codes to help establish the feasibility of geologic repositories for nuclear waste. LLNL has several codes under development. This paper examines the administrative and organizational measures that were and still are being undertaken in order to control the development of the two major codes. In the case of one code, the software quality assurance requirements were imposed five years after the code began its development. This required a retroactive application of requirements. The other code is still in the conceptual stages of development and here requirements can be applied as soon as the initial code design begins. Both codes are being developed by scientists, not computer programmers, and both are modeling codes, not data acquisition and reduction codes. Also the projects for which these codes are being developed have slightly different software quality assurance requirements. All these factors contribute unique difficulties in attempts to assure that the development not only results in a reliable prediction, but that whatever the reliability, it can be objectively shown to exist. The paper will examine a software management model. It will also discuss the reasons why it is felt that this particular model would stand a reasonable chance for success. The paper will then describe the way in which the model should be integrated into the existing management configuration and tradition

  9. Model for Simulating a Spiral Software-Development Process

    Science.gov (United States)

    Mizell, Carolyn; Curley, Charles; Nayak, Umanath

    2010-01-01

    A discrete-event simulation model, and a computer program that implements the model, have been developed as means of analyzing a spiral software-development process. This model can be tailored to specific development environments for use by software project managers in making quantitative cases for deciding among different software-development processes, courses of action, and cost estimates. A spiral process can be contrasted with a waterfall process, which is a traditional process that consists of a sequence of activities that include analysis of requirements, design, coding, testing, and support. A spiral process is an iterative process that can be regarded as a repeating modified waterfall process. Each iteration includes assessment of risk, analysis of requirements, design, coding, testing, delivery, and evaluation. A key difference between a spiral and a waterfall process is that a spiral process can accommodate changes in requirements at each iteration, whereas in a waterfall process, requirements are considered to be fixed from the beginning and, therefore, a waterfall process is not flexible enough for some projects, especially those in which requirements are not known at the beginning or may change during development. For a given project, a spiral process may cost more and take more time than does a waterfall process, but may better satisfy a customer's expectations and needs. Models for simulating various waterfall processes have been developed previously, but until now, there have been no models for simulating spiral processes. The present spiral-process-simulating model and the software that implements it were developed by extending a discrete-event simulation process model of the IEEE 12207 Software Development Process, which was built using commercially available software known as the Process Analysis Tradeoff Tool (PATT). Typical inputs to PATT models include industry-average values of product size (expressed as number of lines of code

  10. Simplifying the Development, Use and Sustainability of HPC Software

    Directory of Open Access Journals (Sweden)

    Jeremy Cohen

    2014-07-01

    Full Text Available Developing software to undertake complex, compute-intensive scientific processes requires a challenging combination of both specialist domain knowledge and software development skills to convert this knowledge into efficient code. As computational platforms become increasingly heterogeneous and newer types of platform such as Infrastructure-as-a-Service (IaaS cloud computing become more widely accepted for high-performance computing (HPC, scientists require more support from computer scientists and resource providers to develop efficient code that offers long-term sustainability and makes optimal use of the resources available to them. As part of the libhpc stage 1 and 2 projects we are developing a framework to provide a richer means of job specification and efficient execution of complex scientific software on heterogeneous infrastructure. In this updated version of our submission to the WSSSPE13 workshop at SuperComputing 2013 we set out our approach to simplifying access to HPC applications and resources for end-users through the use of flexible and interchangeable software components and associated high-level functional-style operations. We believe this approach can support sustainability of scientific software and help to widen access to it.

  11. Workflow Based Software Development Environment, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of this proposed research is to investigate and develop a workflow based tool, the Software Developers Assistant, to facilitate the collaboration between...

  12. Workflow Based Software Development Environment, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of this proposed research is to investigate and develop a workflow based tool, the Software Developers Assistant, to facilitate the collaboration between...

  13. Frameworks for user - developer interactions in a software ...

    African Journals Online (AJOL)

    The dependence of today's society on Information and Communications technology has necessitated the need for software project managers to strive for continuous process improvement. A major challenge faced by most software project managers especially in developing countries however centers on effective ...

  14. Accelerator Operators and Software Development

    International Nuclear Information System (INIS)

    April Miller; Michele Joyce

    2001-01-01

    At Thomas Jefferson National Accelerator Facility, accelerator operators perform tasks in their areas of specialization in addition to their machine operations duties. One crucial area in which operators contribute is software development. Operators with programming skills are uniquely qualified to develop certain controls applications because of their expertise in the day-to-day operation of the accelerator. Jefferson Lab is one of the few laboratories that utilizes the skills and knowledge of operators to create software that enhances machine operations. Through the programs written; by operators, Jefferson Lab has improved machine efficiency and beam availability. Because many of these applications involve automation of procedures and need graphical user interfaces, the scripting language Tcl and the Tk toolkit have been adopted. In addition to automation, some operator-developed applications are used for information distribution. For this purpose, several standard web development tools such as perl, VBScript, and ASP are used. Examples of applications written by operators include injector steering, spin angle changes, system status reports, magnet cycling routines, and quantum efficiency measurements. This paper summarizes how the unique knowledge of accelerator operators has contributed to the success of the Jefferson Lab control system. *This work was supported by the U.S. DOE contract No. DE-AC05-84-ER40150

  15. ON APPROACHES ON THE SOFTWARE DEVELOPMENT FOR THE MEDICAL EDUCATION AREA

    Directory of Open Access Journals (Sweden)

    A. V. Semenets

    2015-05-01

    Importance of application of the version control system to the software development process optimization is shown. Capabilities of the Google Apps For Education cloud platform usage in the software development process are also presented. The final recommendations to the software development process organization in the medical university are formed.

  16. Development of thermohydraulic software for PWR reactors with natural circulation

    International Nuclear Information System (INIS)

    Chasseur, Alfredo F.; Rauschert, A.; Delmastro, Dario F.

    2009-01-01

    The basics concepts about the development of software for steady state analysis of a reactor with natural circulations, in the primary circuit, are exposed. The reactor type is pressurized light water. The equations, correlations and flux diagrams of the source code of the software developed are shown. The source code of the software was written in FORTRAN 77 making use of modular technique, this save development effort and release of news versions is simplified. (author)

  17. Developing medical device software in compliance with regulations.

    Science.gov (United States)

    Zema, M; Rosati, S; Gioia, V; Knaflitz, M; Balestra, G

    2015-08-01

    In the last decade, the use of information technology (IT) in healthcare has taken a growing role. In fact, the adoption of an increasing number of computer tools has led to several benefits related to the process of patient care and allowed easier access to social and health care resources. At the same time this trend gave rise to new challenges related to the implementation of these new technologies. Software used in healthcare can be classified as medical devices depending on the way they are used and on their functional characteristics. If they are classified as medical devices they must satisfy specific regulations. The aim of this work is to present a software development framework that can allow the production of safe and high quality medical device software and to highlight the correspondence between each software development phase and the appropriate standard and/or regulation.

  18. The software development process at the Chandra X-ray Center

    Science.gov (United States)

    Evans, Janet D.; Evans, Ian N.; Fabbiano, Giuseppina

    2008-08-01

    Software development for the Chandra X-ray Center Data System began in the mid 1990's, and the waterfall model of development was mandated by our documents. Although we initially tried this approach, we found that a process with elements of the spiral model worked better in our science-based environment. High-level science requirements are usually established by scientists, and provided to the software development group. We follow with review and refinement of those requirements prior to the design phase. Design reviews are conducted for substantial projects within the development team, and include scientists whenever appropriate. Development follows agreed upon schedules that include several internal releases of the task before completion. Feedback from science testing early in the process helps to identify and resolve misunderstandings present in the detailed requirements, and allows review of intangible requirements. The development process includes specific testing of requirements, developer and user documentation, and support after deployment to operations or to users. We discuss the process we follow at the Chandra X-ray Center (CXC) to develop software and support operations. We review the role of the science and development staff from conception to release of software, and some lessons learned from managing CXC software development for over a decade.

  19. COSTMODL - AN AUTOMATED SOFTWARE DEVELOPMENT COST ESTIMATION TOOL

    Science.gov (United States)

    Roush, G. B.

    1994-01-01

    The cost of developing computer software consumes an increasing portion of many organizations' budgets. As this trend continues, the capability to estimate the effort and schedule required to develop a candidate software product becomes increasingly important. COSTMODL is an automated software development estimation tool which fulfills this need. Assimilating COSTMODL to any organization's particular environment can yield significant reduction in the risk of cost overruns and failed projects. This user-customization capability is unmatched by any other available estimation tool. COSTMODL accepts a description of a software product to be developed and computes estimates of the effort required to produce it, the calendar schedule required, and the distribution of effort and staffing as a function of the defined set of development life-cycle phases. This is accomplished by the five cost estimation algorithms incorporated into COSTMODL: the NASA-developed KISS model; the Basic, Intermediate, and Ada COCOMO models; and the Incremental Development model. This choice affords the user the ability to handle project complexities ranging from small, relatively simple projects to very large projects. Unique to COSTMODL is the ability to redefine the life-cycle phases of development and the capability to display a graphic representation of the optimum organizational structure required to develop the subject project, along with required staffing levels and skills. The program is menu-driven and mouse sensitive with an extensive context-sensitive help system that makes it possible for a new user to easily install and operate the program and to learn the fundamentals of cost estimation without having prior training or separate documentation. The implementation of these functions, along with the customization feature, into one program makes COSTMODL unique within the industry. COSTMODL was written for IBM PC compatibles, and it requires Turbo Pascal 5.0 or later and Turbo

  20. Analysis of Software Development Methodologies to Build Safety Software Applications for the SATEX-II: A Mexican Experimental Satellite

    Science.gov (United States)

    Aguilar Cisneros, Jorge; Vargas Martinez, Hector; Pedroza Melendez, Alejandro; Alonso Arevalo, Miguel

    2013-09-01

    Mexico is a country where the experience to build software for satellite applications is beginning. This is a delicate situation because in the near future we will need to develop software for the SATEX-II (Mexican Experimental Satellite). SATEX- II is a SOMECyTA's project (the Mexican Society of Aerospace Science and Technology). We have experienced applying software development methodologies, like TSP (Team Software Process) and SCRUM in other areas. Then, we analyzed these methodologies and we concluded: these can be applied to develop software for the SATEX-II, also, we supported these methodologies with SSP-05-0 Standard in particular with ESA PSS-05-11. Our analysis was focusing on main characteristics of each methodology and how these methodologies could be used with the ESA PSS 05-0 Standards. Our outcomes, in general, may be used by teams who need to build small satellites, but, in particular, these are going to be used when we will build the on board software applications for the SATEX-II.

  1. Development of Spectrometer Software for Electromagnetic Radiation Measurement and Analysis

    International Nuclear Information System (INIS)

    Mohd Idris Taib; Noor Ezati Shuib; Wan Saffiey Wan Abdullah

    2013-01-01

    This software was under development using LabVIEW to be using with StellarNet Spectrometer system. StellarNet Spectrometer was supplied with SpectraWiz operating software that can measure spectral data for real-time spectroscopy. This LabVIEW software was used to access real-time data from SpectraWiz dynamic link library as hardware interfacing. This software will acquire amplitude of every electromagnetic wavelength at periodic time. In addition to hardware interfacing, the user interface capabilities of software include plotting of spectral data in various mode including scope, absorbance, transmission and irradiance mode. This software surely can be used for research and development in application, utilization and safety of electromagnetic radiation, especially solar, laser and ultra violet. Of-line capabilities of this software are almost unlimited due to availability of mathematical and signal processing function in the LabVIEW add on library. (author)

  2. Practical methods to improve the development of computational software

    International Nuclear Information System (INIS)

    Osborne, A. G.; Harding, D. W.; Deinert, M. R.

    2013-01-01

    The use of computation has become ubiquitous in science and engineering. As the complexity of computer codes has increased, so has the need for robust methods to minimize errors. Past work has show that the number of functional errors is related the number of commands that a code executes. Since the late 1960's, major participants in the field of computation have encouraged the development of best practices for programming to help reduce coder induced error, and this has lead to the emergence of 'software engineering' as a field of study. Best practices for coding and software production have now evolved and become common in the development of commercial software. These same techniques, however, are largely absent from the development of computational codes by research groups. Many of the best practice techniques from the professional software community would be easy for research groups in nuclear science and engineering to adopt. This paper outlines the history of software engineering, as well as issues in modern scientific computation, and recommends practices that should be adopted by individual scientific programmers and university research groups. (authors)

  3. Development of output user interface software to support analysis

    Energy Technology Data Exchange (ETDEWEB)

    Wahanani, Nursinta Adi, E-mail: sintaadi@batan.go.id; Natsir, Khairina, E-mail: sintaadi@batan.go.id; Hartini, Entin, E-mail: sintaadi@batan.go.id [Center for Development of Nuclear Informatics - National Nuclear Energy Agency, PUSPIPTEK, Serpong, Tangerang, Banten (Indonesia)

    2014-09-30

    Data processing software packages such as VSOP and MCNPX are softwares that has been scientifically proven and complete. The result of VSOP and MCNPX are huge and complex text files. In the analyze process, user need additional processing like Microsoft Excel to show informative result. This research develop an user interface software for output of VSOP and MCNPX. VSOP program output is used to support neutronic analysis and MCNPX program output is used to support burn-up analysis. Software development using iterative development methods which allow for revision and addition of features according to user needs. Processing time with this software 500 times faster than with conventional methods using Microsoft Excel. PYTHON is used as a programming language, because Python is available for all major operating systems: Windows, Linux/Unix, OS/2, Mac, Amiga, among others. Values that support neutronic analysis are k-eff, burn-up and mass Pu{sup 239} and Pu{sup 241}. Burn-up analysis used the mass inventory values of actinide (Thorium, Plutonium, Neptunium and Uranium). Values are visualized in graphical shape to support analysis.

  4. Development of output user interface software to support analysis

    International Nuclear Information System (INIS)

    Wahanani, Nursinta Adi; Natsir, Khairina; Hartini, Entin

    2014-01-01

    Data processing software packages such as VSOP and MCNPX are softwares that has been scientifically proven and complete. The result of VSOP and MCNPX are huge and complex text files. In the analyze process, user need additional processing like Microsoft Excel to show informative result. This research develop an user interface software for output of VSOP and MCNPX. VSOP program output is used to support neutronic analysis and MCNPX program output is used to support burn-up analysis. Software development using iterative development methods which allow for revision and addition of features according to user needs. Processing time with this software 500 times faster than with conventional methods using Microsoft Excel. PYTHON is used as a programming language, because Python is available for all major operating systems: Windows, Linux/Unix, OS/2, Mac, Amiga, among others. Values that support neutronic analysis are k-eff, burn-up and mass Pu 239 and Pu 241 . Burn-up analysis used the mass inventory values of actinide (Thorium, Plutonium, Neptunium and Uranium). Values are visualized in graphical shape to support analysis

  5. Software Tools for Development on the Peregrine System | High-Performance

    Science.gov (United States)

    Computing | NREL Software Tools for Development on the Peregrine System Software Tools for and manage software at the source code level. Cross-Platform Make and SCons The "Cross-Platform Make" (CMake) package is from Kitware, and SCons is a modern software build tool based on Python

  6. The study of methodologies of software development for the next generation of HEP detector software

    International Nuclear Information System (INIS)

    Ding Yuzheng; Wang Taijie; Dai Guiliang

    1997-01-01

    The author discusses the characteristics of the next generation of HEP (High Energy Physics) detector software, and describes the basic strategy for the usage of object oriented methodologies, languages and tools in the development of the next generation of HEP detector software

  7. Object Oriented Modeling : A method for combining model and software development

    NARCIS (Netherlands)

    Van Lelyveld, W.

    2010-01-01

    When requirements for a new model cannot be met by available modeling software, new software can be developed for a specific model. Methods for the development of both model and software exist, but a method for combined development has not been found. A compatible way of thinking is required to

  8. Bioconductor: open software development for computational biology and bioinformatics

    DEFF Research Database (Denmark)

    Gentleman, R.C.; Carey, V.J.; Bates, D.M.

    2004-01-01

    The Bioconductor project is an initiative for the collaborative creation of extensible software for computational biology and bioinformatics. The goals of the project include: fostering collaborative development and widespread use of innovative software, reducing barriers to entry into interdisci......The Bioconductor project is an initiative for the collaborative creation of extensible software for computational biology and bioinformatics. The goals of the project include: fostering collaborative development and widespread use of innovative software, reducing barriers to entry...... into interdisciplinary scientific research, and promoting the achievement of remote reproducibility of research results. We describe details of our aims and methods, identify current challenges, compare Bioconductor to other open bioinformatics projects, and provide working examples....

  9. Effective Development and Verification of Railway Control Software

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth

    2011-01-01

    This document presents a method for effective development of software for a product line of similar railway control systems. The software is constructed in three steps: first a specifications in a domain-specific language is created, then a formal behavioural controller model is automatically...

  10. A Development Framework for Software Security in Nuclear Safety Systems: Integrating Secure Development and System Security Activities

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jaekwan; Suh, Yongsuk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-02-15

    The protection of nuclear safety software is essential in that a failure can result in significant economic loss and physical damage to the public. However, software security has often been ignored in nuclear safety software development. To enforce security considerations, nuclear regulator commission recently issued and revised the security regulations for nuclear computer-based systems. It is a great challenge for nuclear developers to comply with the security requirements. However, there is still no clear software development process regarding security activities. This paper proposes an integrated development process suitable for the secure development requirements and system security requirements described by various regulatory bodies. It provides a three-stage framework with eight security activities as the software development process. Detailed descriptions are useful for software developers and licensees to understand the regulatory requirements and to establish a detailed activity plan for software design and engineering.

  11. KAERI software safety guideline for developing safety-critical software in digital instrumentation and control system of nuclear power plant

    International Nuclear Information System (INIS)

    Lee, Jang Soo; Kim, Jang Yeol; Eum, Heung Seop.

    1997-07-01

    Recently, the safety planning for safety-critical software systems is being recognized as the most important phase in the software life cycle, and being developed new regulatory positions and standards by the regulatory and the standardization organization. The requirements for software important to safety of nuclear reactor are described in such positions and standards. Most of them are describing mandatory requirements, what shall be done, for the safety-critical software. The developers of such a software. However, there have been a lot of controversial factors on whether the work practices satisfy the regulatory requirements, and to justify the safety of such a system developed by the work practices, between the licenser and the licensee. We believe it is caused by the reason that there is a gap between the mandatory requirements (What) and the work practices (How). We have developed a guidance to fill such gap, which can be useful for both licenser and licensee to conduct a justification of the safety in the planning phase of developing the software for nuclear reactor protection systems. (author). 67 refs., 13 tabs., 2 figs

  12. KAERI software safety guideline for developing safety-critical software in digital instrumentation and control system of nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jang Soo; Kim, Jang Yeol; Eum, Heung Seop

    1997-07-01

    Recently, the safety planning for safety-critical software systems is being recognized as the most important phase in the software life cycle, and being developed new regulatory positions and standards by the regulatory and the standardization organization. The requirements for software important to safety of nuclear reactor are described in such positions and standards. Most of them are describing mandatory requirements, what shall be done, for the safety-critical software. The developers of such a software. However, there have been a lot of controversial factors on whether the work practices satisfy the regulatory requirements, and to justify the safety of such a system developed by the work practices, between the licenser and the licensee. We believe it is caused by the reason that there is a gap between the mandatory requirements (What) and the work practices (How). We have developed a guidance to fill such gap, which can be useful for both licenser and licensee to conduct a justification of the safety in the planning phase of developing the software for nuclear reactor protection systems. (author). 67 refs., 13 tabs., 2 figs.

  13. The development of digital oscilloscope control software in nuclear measurement

    International Nuclear Information System (INIS)

    Pu Minghui; Tian Geng; Li Xianyou

    2004-01-01

    This essay presents the development of an all-purpose digital oscilloscope control software on Windows 95/98 OS. The background and method are discussed in detail, together with the function and characteristics of the software. With the use of this software, a single PC can control several digital oscilloscopes. Solution of main problems encountered in the development is also discussed. (authors)

  14. Effectiveness of Software Quality Assurance in Offshore Development Enterprises in Sri Lanka

    OpenAIRE

    Malinda G. Sirisena

    2014-01-01

    The aim of this research is to evaluate the effectiveness of software quality assurance approaches of Sri Lankan offshore software development organizations, and to propose a framework which could be used across all offshore software development organizations. An empirical study was conducted using derived framework from popular software quality evaluation models. The research instrument employed was a questionnaire survey among thirty seven Sri Lankan registered offshore software develop...

  15. The dynamics of software development project management: An integrative systems dynamic perspective

    Science.gov (United States)

    Vandervelde, W. E.; Abdel-Hamid, T.

    1984-01-01

    Rather than continuing to focus on software development projects per se, the system dynamics modeling approach outlined is extended to investigate a broader set of issues pertaining to the software development organization. Rather than trace the life cycle(s) of one or more software projects, the focus is on the operations of a software development department as a continuous stream of software products are developed, placed into operation, and maintained. A number of research questions are ""ripe'' for investigating including: (1) the efficacy of different organizational structures in different software development environments, (2) personnel turnover, (3) impact of management approaches such as management by objectives, and (4) the organizational/environmental determinants of productivity.

  16. An Investigation of an Open-Source Software Development Environment in a Software Engineering Graduate Course

    Science.gov (United States)

    Ge, Xun; Huang, Kun; Dong, Yifei

    2010-01-01

    A semester-long ethnography study was carried out to investigate project-based learning in a graduate software engineering course through the implementation of an Open-Source Software Development (OSSD) learning environment, which featured authentic projects, learning community, cognitive apprenticeship, and technology affordances. The study…

  17. Training Software Developers and Designers to Conduct Usability Evaluations

    Science.gov (United States)

    Skov, Mikael Brasholt; Stage, Jan

    2012-01-01

    Many efforts to improve the interplay between usability evaluation and software development rely either on better methods for conducting usability evaluations or on better formats for presenting evaluation results in ways that are useful for software designers and developers. Both of these approaches depend on a complete division of work between…

  18. A Comparison of Learning Technologies for Teaching Spacecraft Software Development

    Science.gov (United States)

    Straub, Jeremy

    2014-01-01

    The development of software for spacecraft represents a particular challenge and is, in many ways, a worst case scenario from a design perspective. Spacecraft software must be "bulletproof" and operate for extended periods of time without user intervention. If the software fails, it cannot be manually serviced. Software failure may…

  19. Toward an Agile Approach to Managing the Effect of Requirements on Software Architecture during Global Software Development

    Directory of Open Access Journals (Sweden)

    Abdulaziz Alsahli

    2016-01-01

    Full Text Available Requirement change management (RCM is a critical activity during software development because poor RCM results in occurrence of defects, thereby resulting in software failure. To achieve RCM, efficient impact analysis is mandatory. A common repository is a good approach to maintain changed requirements, reusing and reducing effort. Thus, a better approach is needed to tailor knowledge for better change management of requirements and architecture during global software development (GSD.The objective of this research is to introduce an innovative approach for handling requirements and architecture changes simultaneously during global software development. The approach makes use of Case-Based Reasoning (CBR and agile practices. Agile practices make our approach iterative, whereas CBR stores requirements and makes them reusable. Twin Peaks is our base model, meaning that requirements and architecture are handled simultaneously. For this research, grounded theory has been applied; similarly, interviews from domain experts were conducted. Interview and literature transcripts formed the basis of data collection in grounded theory. Physical saturation of theory has been achieved through a published case study and developed tool. Expert reviews and statistical analysis have been used for evaluation. The proposed approach resulted in effective change management of requirements and architecture simultaneously during global software development.

  20. A Survey of Formal Methods in Software Development

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2012-01-01

    The use of formal methods and formal techniques in industry is steadily growing. In this survey we shall characterise what we mean by software development and by a formal method; briefly overview a history of formal specification languages - some of which are: VDM (Vienna Development Method, 1974...... need for multi-language formalisation (Petri Nets, MSC, StateChart, Temporal Logics); the sociology of university and industry acceptance of formal methods; the inevitability of the use of formal software development methods; while referring to seminal monographs and textbooks on formal methods....

  1. Research and Development of Statistical Analysis Software System of Maize Seedling Experiment

    OpenAIRE

    Hui Cao

    2014-01-01

    In this study, software engineer measures were used to develop a set of software system for maize seedling experiments statistics and analysis works. During development works, B/S structure software design method was used and a set of statistics indicators for maize seedling evaluation were established. The experiments results indicated that this set of software system could finish quality statistics and analysis for maize seedling very well. The development of this software system explored a...

  2. A cloud based model to facilitate software development uutsourcing to globally distributed locations

    OpenAIRE

    Hashmi, Sajid Ibrahim; Richardson, Ita

    2013-01-01

    peer-reviewed Outsourcing is an essential part of global software development and entails software development distributed across geographical borders. More specifically, it deals with software development teams dispersed across multiple geographical locations to carry out software development activities. By means of this business model, organizations expect to benefit from enhanced corporate value through advantages such as round the clock software development, availability of skills and ...

  3. Conceptions of Software Development by Project Managers: A Study of Managing the Outsourced Development of Software Applications for United States Federal Government Agencies

    Science.gov (United States)

    Eisen, Daniel

    2013-01-01

    This study explores how project managers, working for private federal IT contractors, experience and understand managing the development of software applications for U.S. federal government agencies. Very little is known about how they manage their projects in this challenging environment. Software development is a complex task and only grows in…

  4. Software Engineering Research/Developer Collaborations in 2004 (C104)

    Science.gov (United States)

    Pressburger, Tom; Markosian, Lawrance

    2005-01-01

    In 2004, six collaborations between software engineering technology providers and NASA software development personnel deployed a total of five software engineering technologies (for references, see Section 7.2) on the NASA projects. The main purposes were to benefit the projects, infuse the technologies if beneficial into NASA, and give feedback to the technology providers to improve the technologies. Each collaboration project produced a final report (for references, see Section 7.1). Section 2 of this report summarizes each project, drawing from the final reports and communications with the software developers and technology providers. Section 3 indicates paths to further infusion of the technologies into NASA practice. Section 4 summarizes some technology transfer lessons learned. Section 6 lists the acronyms used in this report.

  5. Object oriented software development in the atlas collaboration

    International Nuclear Information System (INIS)

    Schaffer, A.

    1994-01-01

    For more than a year a group within the Atlas Collaboration has been investigating the possibilities of the application of object oriented methodology and program development to the software of Atlas. Recently this group has been joined by members of the CMS Collaboration in the submission of a proposal to the DRDC at CERN to find a common solution for the software development environment for LHC. This talk will discuss the progress achieved so far and the future perspective

  6. Developing software is not an easy matter

    Directory of Open Access Journals (Sweden)

    Tina Cardrige

    2014-12-01

    Full Text Available Why is it so difficult to learn to develop software? This question has been trying to answer for a long time, but has not yet found a solution to this issue. Moreover, it tends to confuse development with programming, and this also creates problems to elucidate the question. In an era in which urgently required improve the quality, and reliability, and safety of software it becomes urgent to potentiate or develop skills and abilities in professionals to meet these needs. But students are not interested in making careers involving these concepts, they prefer other less demanding and easier to achieve a certification. This article attempts to answer the question and present some suggestions for overcoming this difficulty.

  7. Research and Development on Food Nutrition Statistical Analysis Software System

    OpenAIRE

    Du Li; Ke Yun

    2013-01-01

    Designing and developing a set of food nutrition component statistical analysis software can realize the automation of nutrition calculation, improve the nutrition processional professional’s working efficiency and achieve the informatization of the nutrition propaganda and education. In the software development process, the software engineering method and database technology are used to calculate the human daily nutritional intake and the intelligent system is used to evaluate the user’s hea...

  8. A Capstone Course on Agile Software Development Using Scrum

    Science.gov (United States)

    Mahnic, V.

    2012-01-01

    In this paper, an undergraduate capstone course in software engineering is described that not only exposes students to agile software development, but also makes it possible to observe the behavior of developers using Scrum for the first time. The course requires students to work as Scrum Teams, responsible for the implementation of a set of user…

  9. A REVIEW OF ESTIMATION OF SOFTWARE PRODUCTS DEVELOPMENT COSTS

    Directory of Open Access Journals (Sweden)

    Edin Osmanbegović

    2017-01-01

    Full Text Available In the modern business and management of business processes, the standardization of procedures allows the creation of added value, increasing competitiveness and success in the business of an organization. Evaluation of the budget for software development is crucial to the success of an IT project, because the inability to make a realistic assessment leads to inadequate project plans, customer dissatisfaction, poor quality of software products, and reduced profits. In order to minimize such situations, making accurate and reliable software cost estimation should be carried out at all stages of the project life cycle. Although hundreds of research articles focusing on the application of different methods of budget estimates of the software product have been published so far, there is no comprehensive review of the current situation or review of research trends in the budget estimates of the software product. This paper aims to create a framework for estimation of costs of development of software products by providing an overview of the most influential researchers, the most influential articles published in the WoS database, the most used keywords for searching the articles, as well as a review of the estimation techniques used in budget estimates of the software product.

  10. Development of Farm Records Software

    Directory of Open Access Journals (Sweden)

    M. S. Abubakar

    2017-12-01

    Full Text Available Farm records are mostly manually kept on paper notebooks and folders where similar records are organized in one folder or spread sheet. These records are usually kept for many years therefore they becomes bulky and less organized. Consequently, it becomes difficult to search, update and tedious and time consuming to manage these records. This study was carried-out to overcome these problems associated with manual farm records keeping by developing user-friendly, easily accessible, reliable and secured software. The software was limited records keeping in crop production, livestock production, poultry production, employees, income and expenditure. The system was implemented using Java Server Faces (JSF for designing Graphical User Interface (GUI, Enterprises Java Beans (EJB for logic tier and MySQL database for storing farm records.

  11. Need for multiple approaches in collaborative software development

    International Nuclear Information System (INIS)

    LePoire, D. J.

    2002-01-01

    The need to share software and reintegrate it into new applications presents a difficult but important challenge. Component-based development as an approach to this problem is receiving much attention in professional journals and academic curricula. However, there are many other approaches to collaborative software development that might be more appropriate. This paper reviews a few of these approaches and discusses criteria for the conditions and contexts in which these alternative approaches might be more appropriate. This paper complements the discussion of context-based development team organizations and processes. Examples from a small development team that interacts with a larger professional community are analyzed

  12. Math Description Engine Software Development Kit

    Science.gov (United States)

    Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

    2010-01-01

    The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

  13. Improved Software to Browse the Serial Medical Images for Learning.

    Science.gov (United States)

    Kwon, Koojoo; Chung, Min Suk; Park, Jin Seo; Shin, Byeong Seok; Chung, Beom Sun

    2017-07-01

    The thousands of serial images used for medical pedagogy cannot be included in a printed book; they also cannot be efficiently handled by ordinary image viewer software. The purpose of this study was to provide browsing software to grasp serial medical images efficiently. The primary function of the newly programmed software was to select images using 3 types of interfaces: buttons or a horizontal scroll bar, a vertical scroll bar, and a checkbox. The secondary function was to show the names of the structures that had been outlined on the images. To confirm the functions of the software, 3 different types of image data of cadavers (sectioned and outlined images, volume models of the stomach, and photos of the dissected knees) were inputted. The browsing software was downloadable for free from the homepage (anatomy.co.kr) and available off-line. The data sets provided could be replaced by any developers for their educational achievements. We anticipate that the software will contribute to medical education by allowing users to browse a variety of images. © 2017 The Korean Academy of Medical Sciences.

  14. Development of design and analysis software for advanced nuclear system

    International Nuclear Information System (INIS)

    Wu Yican; Hu Liqin; Long Pengcheng; Luo Yuetong; Li Yazhou; Zeng Qin; Lu Lei; Zhang Junjun; Zou Jun; Xu Dezheng; Bai Yunqing; Zhou Tao; Chen Hongli; Peng Lei; Song Yong; Huang Qunying

    2010-01-01

    A series of professional codes, which are necessary software tools and data libraries for advanced nuclear system design and analysis, were developed by the FDS Team, including the codes of automatic modeling, physics and engineering calculation, virtual simulation and visualization, system engineering and safety analysis and the related database management etc. The development of these software series was proposed as an exercise of development of nuclear informatics. This paper introduced the main functions and key techniques of the software series, as well as some tests and practical applications. (authors)

  15. artdaq: DAQ software development made simple

    Science.gov (United States)

    Biery, Kurt; Flumerfelt, Eric; Freeman, John; Ketchum, Wesley; Lukhanin, Gennadiy; Rechenmacher, Ron

    2017-10-01

    For a few years now, the artdaq data acquisition software toolkit has provided numerous experiments with ready-to-use components which allow for rapid development and deployment of DAQ systems. Developed within the Fermilab Scientific Computing Division, artdaq provides data transfer, event building, run control, and event analysis functionality. This latter feature includes built-in support for the art event analysis framework, allowing experiments to run art modules for real-time filtering, compression, disk writing and online monitoring. As art, also developed at Fermilab, is also used for offline analysis, a major advantage of artdaq is that it allows developers to easily switch between developing online and offline software. artdaq continues to be improved. Support for an alternate mode of running whereby data from some subdetector components are only streamed if requested has been added; this option will reduce unnecessary DAQ throughput. Real-time reporting of DAQ metrics has been implemented, along with the flexibility to choose the format through which experiments receive the reports; these formats include the Ganglia, Graphite and syslog software packages, along with flat ASCII files. Additionally, work has been performed investigating more flexible modes of online monitoring, including the capability to run multiple online monitoring processes on different hosts, each running its own set of art modules. Finally, a web-based GUI interface through which users can configure details of their DAQ system has been implemented, increasing the ease of use of the system. Already successfully deployed on the LArlAT, DarkSide-50, DUNE 35ton and Mu2e experiments, artdaq will be employed for SBND and is a strong candidate for use on ICARUS and protoDUNE. With each experiment comes new ideas for how artdaq can be made more flexible and powerful. The above improvements will be described, along with potential ideas for the future.

  16. Remote Software Application and Display Development

    Science.gov (United States)

    Sanders, Brandon T.

    2014-01-01

    The era of the shuttle program has come to an end, but only to give rise to newer and more exciting projects. Now is the time of the Orion spacecraft, a work of art designed to exceed all previous endeavors of man. NASA is exiting the time of exploration and is entering a new period, a period of pioneering. With this new mission, many of NASAs organizations must undergo a great deal of change and development to support the Orion missions. The Spaceport Command and Control System (SCCS) is the new system that will provide NASA the ability to launch rockets into orbit and thus control Orion and other spacecraft as the goal of populating Mars becomes ever increasingly tangible. Since the previous control system, Launch Processing System (LPS), was primarily designed to launch the shuttles, SCCS was needed as Kennedy Space Center (KSC) reorganized to a multiuser spaceport for commercial flights, providing a more versatile control over rockets. Within SCCS, is the Launch Control System (LCS), which is the remote software behind the command and monitoring of flight and ground system hardware. This internship at KSC has involved two main components in LCS, including Remote Software Application and Display development. The display environment provides a graphical user interface for an operator to view and see if any cautions are raised, while the remote applications are the backbone that communicate with hardware, and then relay the data back to the displays. These elements go hand in hand as they provide monitoring and control over hardware and software alike from the safety of the Launch Control Center. The remote software applications are written in Application Control Language (ACL), which must undergo unit testing to ensure data integrity. This paper describes both the implementation and writing of unit tests in ACL code for remote software applications, as well as the building of remote displays to be used in the Launch Control Center (LCC).

  17. A Simulation Model for the Waterfall Software Development Life Cycle

    OpenAIRE

    Bassil, Youssef

    2012-01-01

    Software development life cycle or SDLC for short is a methodology for designing, building, and maintaining information and industrial systems. So far, there exist many SDLC models, one of which is the Waterfall model which comprises five phases to be completed sequentially in order to develop a software solution. However, SDLC of software systems has always encountered problems and limitations that resulted in significant budget overruns, late or suspended deliveries, and dissatisfied client...

  18. Demographic-Based Perceptions of Adequacy of Software Security's Presence within Individual Phases of the Software Development Life Cycle

    Science.gov (United States)

    Kramer, Aleksey

    2013-01-01

    The topic of software security has become paramount in information technology (IT) related scholarly research. Researchers have addressed numerous software security topics touching on all phases of the Software Development Life Cycle (SDLC): requirements gathering phase, design phase, development phase, testing phase, and maintenance phase.…

  19. Recent Developments in Low-Level Software Security

    OpenAIRE

    Agten , Pieter; Nikiforakis , Nick; Strackx , Raoul; Groef , Willem ,; Piessens , Frank

    2012-01-01

    Part 1: Keynotes; International audience; An important objective for low-level software security research is to develop techniques that make it harder to launch attacks that exploit implementation details of the system under attack. Baltopoulos and Gordon have summarized this as the principle of source-based reasoning for security: security properties of a software system should follow from review of the source code and its source-level semantics, and should not depend on details of the compi...

  20. Joint Partnership: a New Software Development Paradigm

    International Nuclear Information System (INIS)

    Smejkal, A.; Linnebach, R.; ); Longo, J.; Nordquist, H.; Regula, J.

    2015-01-01

    A joint development partnership between Euratom and the IAEA was established in 2013 for the standard software iRAP (Integrated Review and Analysis Program), an automated analysis tool for Non-Destructive Analysis data. The application includes a database system which allows inspectors to perform an efficient, easy and quick review of huge amounts of safeguards relevant data especially in large facilities. iRAP (formerly know as CRISP) analyzes measured data in a multi-sensor system and compares the results with item movement declarations provided by the plant operator. A considerable number of evaluation algorithms are already integrated into the iRAP system. They are the core of the application and can be either developed in-house (e.g., Pu Mass Calculation) or integrated as a third party development into the system. The licence agreement which provides the legal basis for the joint development shares Intellectual Property (IP) rights, costs for development, and combines features that are beneficial to both inspectorates. Instead of starting a new costly software development, the Agency can leverage already existing code and make smaller investments into tailoring the application to the needs of IAEA inspectors. Much of the system's integrity depends on the requirements gathered. A joint development partnership involves more users in the development life cycle; more users will define their requirements. This ensures that the system developed satisfies the actual needs of safeguards inspectors of both organizations. A joint software development allows as well for an efficient use of financial and human resources. Within the frame of the agreement, a Change Control Board (CCB) with members of both organizations has been established. The CCB meets regularly in order to bring developers, users and technicians together in the very early phase of a development cycle, to define the scope and requirements of projects, to avoid potential conflicts among different

  1. TAPSOFT'95: Theory and Practice of Software Development

    DEFF Research Database (Denmark)

    This volume presents the proceedings of the Sixth International Joint Conference on the Theory and Practice of Software Engineering, TAPSOFT '95, held in Aarhus, Denmark in May 1995. TAPSOFT '95 celebrates the 10th anniversary of this conference series started in Berlin in 1985 to bring together...... theoretical computer scientists and software engineers (researchers and practitioners) with a view to discussing how formal methods can usefully be applied in software development. The volume contains seven invited papers, among them one by Vaugham Pratt on the recently revealed bug in the Pentium chip...

  2. Software Development Process Changes in the Telecommunications Industry

    Directory of Open Access Journals (Sweden)

    John Kevin Doyle

    2006-06-01

    Full Text Available The tremendous changes in the telecommunications business in the last several years drove changes in the software development processes of telecommunications equipment providers. We compare changes in these very large projects, in two companies, with those proposed in the Theory of Constraints / Critical Chains, Extreme Programming, and Agile development models. The 2000s have been a time of significant challenge in the telecommunications equipment business. Telecommunications service providers have excess equipment capacity. Many are waiting for next generation telephone switches that will simultaneously lower operating costs and enable additional revenue generation. The large service providers have drastically reduced their capital and expense purchases. Many small service providers, particularly the dot-coms, went bankrupt; much of their equipment is on the secondary market, at a fraction of the original cost. Thus the equipment market has significantly shrunk, and the equipment providers have been reducing expenses, while continuing to deliver software and hardware equipment at the high quality level required by the service providers. This drove many changes in the software development process. While the process changes are reported in two telecommunication equipment development organizations, the changes are applicable in any product development organization.

  3. Buy, don't build -- What does that mean for a software developer?

    International Nuclear Information System (INIS)

    Little, T.; Rahi, M.A.; Sinclair, C.

    1995-01-01

    The buzz phrase of the 1990's for the petroleum software industry has become ''buy, don't build.'' For an end user in an oil company, this generally means acquiring application software rather than developing it internally. The concept of buy, don't build can also apply for a software developer. Purchasing software toolkit components can expedite the development of an application as well as reduce future support requirements

  4. Real-time Kernel Implementation Practice Program for Embedded Software Engineers' Education and its Evaluation

    Science.gov (United States)

    Yoshida, Toshio; Matsumoto, Masahide; Seo, Katsuhiko; Chino, Shinichiro; Sugino, Eiji; Sawamoto, Jun; Koizumi, Hisao

    A real-time kernel (henceforth RTK) is in the center place of embedded software technology, and the understanding of RTK is indispensable for the embedded system design. To implement RTK, it is necessary to understand languages that describe RTK software program code, system programming manners, software development tools, CPU on that RTK runs and the interface between software and hardware, etc. in addition to understanding of RTK itself. This means RTK implementation process largely covers embedded software implementation process. Therefore, it is thought that RTK implementation practice program is very effective as a means of the acquisition of common embedded software skill in addition to deeper acquisition of RTK itself. In this paper, we propose to apply RTK implementing practice program to embedded software engineers educational program. We newly developed very small and step-up type RTK named μK for educational use, and held a seminar that used μK as a teaching material for the students of information science and engineers of the software house. As a result, we confirmed that RTK implementation practice program is very effective for the acquisition of embedded software common skill.

  5. Development of a software for the curimeter model cdn102

    International Nuclear Information System (INIS)

    Dotres Llera, Armando

    2001-01-01

    The characteristics of the software for the Curimeter Model CD-N102 developed at CEADEN are presented. The software consists of two main parts: a basic software for the electrometer block and an application software for a P C. The basic software is totally independent of the Pc and performs all the basic functions of the process of measurement. The application software is optional and offers a friendlier interface and additional options to the user. Among these is the possibility to keep a statistical record of the measurements in a database, to create labels and to introduce new isotopes and calibrate them. A more detailed explanation of both software is given

  6. Adapting the unified software development process for user interface development

    NARCIS (Netherlands)

    Obrenovic, Z.; Starcevic, D.

    2006-01-01

    In this paper we describe how existing software developing processes, such as Rational Unified Process, can be adapted in order to allow disciplined and more efficient development of user interfaces. The main objective of this paper is to demonstrate that standard modeling environments, based on the

  7. Software development to support decommissioning and waste management strategic planning

    International Nuclear Information System (INIS)

    Williams, John; Warneford, Ian; Harrison, J.

    1997-01-01

    One of the components of the UKAEA's mission is to care for and, at the appropriate time, safely dismantle its radioactive facilities which are no longer in use. To assist in the development of an optimised strategy, AEA Technology was commissioned to produce decision support software. This paper describes the background to the development of the software, its key features and current status, and the lessons learnt during the development. The software, known as UKAEA SPS (Strategic Planning System), is a unique support software package that has been developed to assist in the planning of decommissioning and radioactive waste management. SPS models linked decommissioning and waste management strategies covering all of UKAEA's nuclear liabilities. It has been developed around the database package ACCESS, and runs on Pentium PCs; however, it has many of the features of project planning systems. Its principal outputs are costs, timings and utilisation data for the waste stores, processing facilities, transport and disposal operations displayed at any level of aggregation. This allows programme managers to see easily the effects of changing key parameters in a strategy under development. (author)

  8. Framework programmable platform for the advanced software development workstation. Integration mechanism design document

    Science.gov (United States)

    Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Reddy, Uday; Ackley, Keith; Futrell, Mike

    1991-01-01

    The Framework Programmable Software Development Platform (FPP) is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software development environment. Guided by this model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated.

  9. Object oriented development of engineering software using CLIPS

    Science.gov (United States)

    Yoon, C. John

    1991-01-01

    Engineering applications involve numeric complexity and manipulations of a large amount of data. Traditionally, numeric computation has been the concern in developing an engineering software. As engineering application software became larger and more complex, management of resources such as data, rather than the numeric complexity, has become the major software design problem. Object oriented design and implementation methodologies can improve the reliability, flexibility, and maintainability of the resulting software; however, some tasks are better solved with the traditional procedural paradigm. The C Language Integrated Production System (CLIPS), with deffunction and defgeneric constructs, supports the procedural paradigm. The natural blending of object oriented and procedural paradigms has been cited as the reason for the popularity of the C++ language. The CLIPS Object Oriented Language's (COOL) object oriented features are more versatile than C++'s. A software design methodology based on object oriented and procedural approaches appropriate for engineering software, and to be implemented in CLIPS was outlined. A method for sensor placement for Space Station Freedom is being implemented in COOL as a sample problem.

  10. Developing Teaching Material Software Assisted for Numerical Methods

    Science.gov (United States)

    Handayani, A. D.; Herman, T.; Fatimah, S.

    2017-09-01

    The NCTM vision shows the importance of two things in school mathematics, which is knowing the mathematics of the 21st century and the need to continue to improve mathematics education to answer the challenges of a changing world. One of the competencies associated with the great challenges of the 21st century is the use of help and tools (including IT), such as: knowing the existence of various tools for mathematical activity. One of the significant challenges in mathematical learning is how to teach students about abstract concepts. In this case, technology in the form of mathematics learning software can be used more widely to embed the abstract concept in mathematics. In mathematics learning, the use of mathematical software can make high level math activity become easier accepted by student. Technology can strengthen student learning by delivering numerical, graphic, and symbolic content without spending the time to calculate complex computing problems manually. The purpose of this research is to design and develop teaching materials software assisted for numerical method. The process of developing the teaching material starts from the defining step, the process of designing the learning material developed based on information obtained from the step of early analysis, learners, materials, tasks that support then done the design step or design, then the last step is the development step. The development of teaching materials software assisted for numerical methods is valid in content. While validator assessment for teaching material in numerical methods is good and can be used with little revision.

  11. Toward a Theory of Information System Development Success: Perceptions of Software Development Team Members

    OpenAIRE

    Zelazny, Lucian M.

    2011-01-01

    This dissertation increases our understanding of information system project success by investigating how software development team members define the success of an information system development effort. The theoretical model of ISD success is developed and tested. ISD success is measured through the eyes of the software development team membersâ since they are the most influential stakeholders during the development of the system. This dissertation was conducted in two phases: 1) theo...

  12. Designing Project Management for Global Software Development

    DEFF Research Database (Denmark)

    Tjørnehøj, Gitte; B. Balogh, Maria; Iversen, Cathrine

    2014-01-01

    of distributed software teams, based on a practice study and informed by well-known theories. Our work pinpoints the difficulties of handling the vital informal processes in distributed collaboration that are so vulnerable because the distances risk detaining their growth and increasing their decay rate......Software development in distributed teams remains challenging despite rapid technical improvement in tools for communication and collaboration across distance. The challenges stem from geographical, temporal and sociocultural distance and manifest themselves in a variety of difficulties...

  13. Current practice in software development for computational neuroscience and how to improve it.

    Science.gov (United States)

    Gewaltig, Marc-Oliver; Cannon, Robert

    2014-01-01

    Almost all research work in computational neuroscience involves software. As researchers try to understand ever more complex systems, there is a continual need for software with new capabilities. Because of the wide range of questions being investigated, new software is often developed rapidly by individuals or small groups. In these cases, it can be hard to demonstrate that the software gives the right results. Software developers are often open about the code they produce and willing to share it, but there is little appreciation among potential users of the great diversity of software development practices and end results, and how this affects the suitability of software tools for use in research projects. To help clarify these issues, we have reviewed a range of software tools and asked how the culture and practice of software development affects their validity and trustworthiness. We identified four key questions that can be used to categorize software projects and correlate them with the type of product that results. The first question addresses what is being produced. The other three concern why, how, and by whom the work is done. The answers to these questions show strong correlations with the nature of the software being produced, and its suitability for particular purposes. Based on our findings, we suggest ways in which current software development practice in computational neuroscience can be improved and propose checklists to help developers, reviewers, and scientists to assess the quality of software and whether particular pieces of software are ready for use in research.

  14. Current practice in software development for computational neuroscience and how to improve it.

    Directory of Open Access Journals (Sweden)

    Marc-Oliver Gewaltig

    2014-01-01

    Full Text Available Almost all research work in computational neuroscience involves software. As researchers try to understand ever more complex systems, there is a continual need for software with new capabilities. Because of the wide range of questions being investigated, new software is often developed rapidly by individuals or small groups. In these cases, it can be hard to demonstrate that the software gives the right results. Software developers are often open about the code they produce and willing to share it, but there is little appreciation among potential users of the great diversity of software development practices and end results, and how this affects the suitability of software tools for use in research projects. To help clarify these issues, we have reviewed a range of software tools and asked how the culture and practice of software development affects their validity and trustworthiness. We identified four key questions that can be used to categorize software projects and correlate them with the type of product that results. The first question addresses what is being produced. The other three concern why, how, and by whom the work is done. The answers to these questions show strong correlations with the nature of the software being produced, and its suitability for particular purposes. Based on our findings, we suggest ways in which current software development practice in computational neuroscience can be improved and propose checklists to help developers, reviewers, and scientists to assess the quality of software and whether particular pieces of software are ready for use in research.

  15. Of deadlocks and peopleware-collaborative work practices in global software development

    OpenAIRE

    Avram, Gabriela

    2007-01-01

    peer-reviewed As part of a research project dedicated to the Social Organizational and Cultural Aspects of Global Software Development, the author has chosen to focus on collaborative work practices and knowledge management aspects of collaborative work. More precisely, the focus is on how the global distribution of software development affects collaborative work. The current paper is a first attempt to unveil, through a concrete situation observed in a distributed software development ...

  16. Adapting and Using Scrum in a Software Research and Development Laboratory

    Directory of Open Access Journals (Sweden)

    LIMA, I. R.

    2012-06-01

    Full Text Available Agile software development has gained importance in the industry because of its approach on the issues of human agility and return on investment. This paper shows how Scrum agile software project management methodology has been deployed and adapted to the model of software project management of a research and development laboratory. As a result of this deployment, experiences and lessons learned in seven real projects developed by the authors are reported.

  17. Software safety analysis techniques for developing safety critical software in the digital protection system of the LMR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jang Soo; Cheon, Se Woo; Kim, Chang Hoi; Sim, Yun Sub

    2001-02-01

    This report has described the software safety analysis techniques and the engineering guidelines for developing safety critical software to identify the state of the art in this field and to give the software safety engineer a trail map between the code and standards layer and the design methodology and documents layer. We have surveyed the management aspects of software safety activities during the software lifecycle in order to improve the safety. After identifying the conventional safety analysis techniques for systems, we have surveyed in details the software safety analysis techniques, software FMEA(Failure Mode and Effects Analysis), software HAZOP(Hazard and Operability Analysis), and software FTA(Fault Tree Analysis). We have also surveyed the state of the art in the software reliability assessment techniques. The most important results from the reliability techniques are not the specific probability numbers generated, but the insights into the risk importance of software features. To defend against potential common-mode failures, high quality, defense-in-depth, and diversity are considered to be key elements in digital I and C system design. To minimize the possibility of CMFs and thus increase the plant reliability, we have provided D-in-D and D analysis guidelines.

  18. Software safety analysis techniques for developing safety critical software in the digital protection system of the LMR

    International Nuclear Information System (INIS)

    Lee, Jang Soo; Cheon, Se Woo; Kim, Chang Hoi; Sim, Yun Sub

    2001-02-01

    This report has described the software safety analysis techniques and the engineering guidelines for developing safety critical software to identify the state of the art in this field and to give the software safety engineer a trail map between the code and standards layer and the design methodology and documents layer. We have surveyed the management aspects of software safety activities during the software lifecycle in order to improve the safety. After identifying the conventional safety analysis techniques for systems, we have surveyed in details the software safety analysis techniques, software FMEA(Failure Mode and Effects Analysis), software HAZOP(Hazard and Operability Analysis), and software FTA(Fault Tree Analysis). We have also surveyed the state of the art in the software reliability assessment techniques. The most important results from the reliability techniques are not the specific probability numbers generated, but the insights into the risk importance of software features. To defend against potential common-mode failures, high quality, defense-in-depth, and diversity are considered to be key elements in digital I and C system design. To minimize the possibility of CMFs and thus increase the plant reliability, we have provided D-in-D and D analysis guidelines

  19. Software Development Offshoring Competitiveness: A Case Study of ASEAN Countries

    Science.gov (United States)

    Bui, Minh Q.

    2011-01-01

    With the success of offshoring within the American software industry, corporate executives are moving their software developments overseas. The member countries of the Association of Southeast Asian Nations (ASEAN) have become a preferred destination. However, there is a lack of published studies on the region's software competitiveness in…

  20. Integrating Design Decision Management with Model-based Software Development

    DEFF Research Database (Denmark)

    Könemann, Patrick

    Design decisions are continuously made during the development of software systems and are important artifacts for design documentation. Dedicated decision management systems are often used to capture such design knowledge. Most such systems are, however, separated from the design artifacts...... of the system. In model-based software development, where design models are used to develop a software system, outcomes of many design decisions have big impact on design models. The realization of design decisions is often manual and tedious work on design models. Moreover, keeping design models consistent......, or by ignoring the causes. This substitutes manual reviews to some extent. The concepts, implemented in a tool, have been validated with design patterns, refactorings, and domain level tests that comprise a replay of a real project. This proves the applicability of the solution to realistic examples...

  1. The distributed development environment for SDSS software

    International Nuclear Information System (INIS)

    Berman, E.; Gurbani, V.; Mackinnon, B.; Newberg, H. Nicinski, T.; Petravick, D.; Pordes, R.; Sergey, G.; Stoughton, C.; Lupton, R.

    1994-04-01

    The authors present an integrated science software development environment, code maintenance and support system for the Sloan Digital Sky Survey (SDSS) now being actively used throughout the collaboration

  2. Examining the Use of Usability Results in a Software Development Company

    DEFF Research Database (Denmark)

    Høegh, Rune Thaarup; Stage, Jan

    2004-01-01

    This paper presents the first results of a study on a usability evaluation for a Danish software development company. The use of the results from the usability evaluation is examined through interviews with two developers from the software company. It is through an interview with a project leader...... from the company found that the traditional usability report plays a very little role for the development team. Initial results suggest that textual feedback proves more valuable when accompanied with video and oral feedback.......This paper presents the first results of a study on a usability evaluation for a Danish software development company. The use of the results from the usability evaluation is examined through interviews with two developers from the software company. It is through an interview with a project leader...

  3. Holistic Framework For Establishing Interoperability of Heterogeneous Software Development Tools

    National Research Council Canada - National Science Library

    Puett, Joseph

    2003-01-01

    This dissertation presents a Holistic Framework for Software Engineering (HFSE) that establishes collaborative mechanisms by which existing heterogeneous software development tools and models will interoperate...

  4. Software Development in the Water Sciences: a view from the divide (Invited)

    Science.gov (United States)

    Miles, B.; Band, L. E.

    2013-12-01

    While training in statistical methods is an important part of many earth scientists' training, these scientists often learn the bulk of their software development skills in an ad hoc, just-in-time manner. Yet to carry out contemporary research scientists are spending more and more time developing software. Here I present perspectives - as an earth sciences graduate student with professional software engineering experience - on the challenges scientists face adopting software engineering practices, with an emphasis on areas of the science software development lifecycle that could benefit most from improved engineering. This work builds on experience gained as part of the NSF-funded Water Science Software Institute (WSSI) conceptualization award (NSF Award # 1216817). Throughout 2013, the WSSI team held a series of software scoping and development sprints with the goals of: (1) adding features to better model green infrastructure within the Regional Hydro-Ecological Simulation System (RHESSys); and (2) infusing test-driven agile software development practices into the processes employed by the RHESSys team. The goal of efforts such as the WSSI is to ensure that investments by current and future scientists in software engineering training will enable transformative science by improving both scientific reproducibility and researcher productivity. Experience with the WSSI indicates: (1) the potential for achieving this goal; and (2) while scientists are willing to adopt some software engineering practices, transformative science will require continued collaboration between domain scientists and cyberinfrastructure experts for the foreseeable future.

  5. Technical Equivalency Documentation for a Newly Acquired Alpha Spectroscopy System

    International Nuclear Information System (INIS)

    Hickman, D P; Fisher, S K; Hann, P R; Hume, R

    2007-01-01

    The response of a recently acquired Canberra(trademark) Alpha Analyst 'Blue' system (Chamber Number's 173-208) used by the Hazards Control, Radiation Safety Section, WBC/Spectroscopy Team has been studied with respect to an existing Canberra system. The existing Canberra system consists of thirty Alpha Analyst dual chambers Model XXXX comprising a total of sixty detectors (Chambers Number's 101-124 and 137-172). The existing chambers were previously compared to an older system consisting of thirty-six Model 7401 alpha spectrometry chambers (Chamber Number's 1-36) Chambers 101-124 and 137-172 are DOELAP accredited. The older system was previously DOELAP accredited for the routine Alpha Spectroscopy program used in LLNL's in vitro bioassay program. The newly acquired Alpha Analyst system operates on a network with software that controls and performs analysis of the current Alpha Analyst system (Chamber Number's 101-124 and 137-172). This exact same software is used for the current system and the newly acquired system and is DOELAP accredited. This document compares results from the existing Alpha System with the newer Alpha Analyst system

  6. Appliance of software engineering in development of nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Baek, Y. W.; Kim, H. C.; Yun, C. [Chungnam National Univ., Taejon (Korea, Republic of); Kim, B. R. [KINS, Taejon (Korea, Republic of)

    1999-10-01

    Application of computer technology in nuclear power plant is also a necessary transformation as in other industry fields. But until now, application of software technology was not wide-spread because of its potential effect to safety in nuclear field. It is an urgent theme to develop evaluation guide and regulation techniques to guarantee safety, reliability and quality assurance. To meet these changes, techniques for development and operation should be enhanced to ensure the quality of software systems. In this study, we show the difference between waterfall model and software life-cycle needed in development of nuclear power plant and propose the consistent framework needed in development of instrumentation and control system of nuclear power plant.

  7. Appliance of software engineering in development of nuclear power plant

    International Nuclear Information System (INIS)

    Baek, Y. W.; Kim, H. C.; Yun, C.; Kim, B. R.

    1999-01-01

    Application of computer technology in nuclear power plant is also a necessary transformation as in other industry fields. But until now, application of software technology was not wide-spread because of its potential effect to safety in nuclear field. It is an urgent theme to develop evaluation guide and regulation techniques to guarantee safety, reliability and quality assurance. To meet these changes, techniques for development and operation should be enhanced to ensure the quality of software systems. In this study, we show the difference between waterfall model and software life-cycle needed in development of nuclear power plant and propose the consistent framework needed in development of instrumentation and control system of nuclear power plant

  8. Flexible, reliable software using patterns and agile development

    CERN Document Server

    Christensen, Henrik B

    2010-01-01

    …This book brings together a careful selection of topics that are relevant, indeed crucial, for developing good quality software with a carefully designed pedagogy that leads the reader through an experience of active learning. The emphasis in the content is on practical goals-how to construct reliable and flexible software systems-covering many topics that every software engineer should have studied. The emphasis in the method is on providing a practical context, hands-on projects, and guidance on process. … The text discusses not only what the end product should be like, but also how to get

  9. Lessons learned from development and quality assurance of software systems at the Halden Project

    International Nuclear Information System (INIS)

    Bjorlo, T.J.; Berg, O.; Pehrsen, M.; Dahll, G.; Sivertsen, T.

    1996-01-01

    The OECD Halden Reactor Project has developed a number of software systems within the research programmes. These programmes have comprised a wide range of topics, like studies of software for safety-critical applications, development of different operator support systems, and software systems for building and implementing graphical user interfaces. The systems have ranged from simple prototypes to installations in process plants. In the development of these software systems, Halden has gained much experience in quality assurance of different types of software. This paper summarises the accumulated experience at the Halden Project in quality assurance of software systems. The different software systems being developed at the Halden Project may be grouped into three categories. These are plant-specific software systems (one-of-a-kind deliveries), generic software products, and safety-critical software systems. This classification has been found convenient as the categories have different requirements to the quality assurance process. In addition, the experience from use of software development tools and proprietary software systems at Halden, is addressed. The paper also focuses on the experience gained from the complete software life cycle, starting with the software planning phase and ending with software operation and maintenance

  10. Agile methods in biomedical software development: a multi-site experience report

    Directory of Open Access Journals (Sweden)

    Kuhlmman Karl F

    2006-05-01

    Full Text Available Abstract Background Agile is an iterative approach to software development that relies on strong collaboration and automation to keep pace with dynamic environments. We have successfully used agile development approaches to create and maintain biomedical software, including software for bioinformatics. This paper reports on a qualitative study of our experiences using these methods. Results We have found that agile methods are well suited to the exploratory and iterative nature of scientific inquiry. They provide a robust framework for reproducing scientific results and for developing clinical support systems. The agile development approach also provides a model for collaboration between software engineers and researchers. We present our experience using agile methodologies in projects at six different biomedical software development organizations. The organizations include academic, commercial and government development teams, and included both bioinformatics and clinical support applications. We found that agile practices were a match for the needs of our biomedical projects and contributed to the success of our organizations. Conclusion We found that the agile development approach was a good fit for our organizations, and that these practices should be applicable and valuable to other biomedical software development efforts. Although we found differences in how agile methods were used, we were also able to identify a set of core practices that were common to all of the groups, and that could be a focus for others seeking to adopt these methods.

  11. Outsourcing the development of specific application software using the ESA software engineering standards the SPS software Interlock System

    CERN Document Server

    Denis, B

    1995-01-01

    CERN is considering outsourcing as a solution to the reduction of staff. To need to re-engineer the SPS Software Interlock System provided an opportunity to explore the applicability of outsourcing to our specific controls environment and the ESA PSS-05 standards were selected for the requirements specification, the development, the control and monitoring and the project management. The software produced by the contractor is now fully operational. After outlining the scope and the complexity of the project, a discussion on the ESA PSS-05 will be presented: the choice, the way these standards improve the outsourcing process, the quality induced but also the need to adapt them and their limitation in the definition of the customer-supplier relationship. The success factors and the difficulties of development under contract will also be discussed. The maintenance aspect and the impact on in-house developments will finally be addressed.

  12. SimulaQron - A simulator for developing quantum internet software

    OpenAIRE

    Dahlberg, Axel; Wehner, Stephanie

    2017-01-01

    We introduce a simulator for a quantum internet with the specific goal to support software development. A quantum internet consists of local quantum processors, which are interconnected by quantum communication channels that enable the transmission of qubits between the different processors. While many simulators exist for local quantum processors, there is presently no simulator for a quantum internet tailored towards software development. Quantum internet protocols require both classical as...

  13. On the Current Measurement Practices in Agile Software Development

    OpenAIRE

    Javdani, Taghi; Zulzalil, Hazura; Ghani, Abdul Azim Abd; Sultan, Abu Bakar Md; Parizi, Reza Meimandi

    2013-01-01

    Agile software development (ASD) methods were introduced as a reaction to traditional software development methods. Principles of these methods are different from traditional methods and so there are some different processes and activities in agile methods comparing to traditional methods. Thus ASD methods require different measurement practices comparing to traditional methods. Agile teams often do their projects in the simplest and most effective way so, measurement practices in agile metho...

  14. Mass market development strategies of software industries: Case study based research

    Directory of Open Access Journals (Sweden)

    Varun Gupta

    2016-09-01

    Full Text Available The success in competitive mass market software development depends on the quality of software development and market segments targeted. Market segments are categorized by uncertainties contributed by “Newness” and “turbulences”, making the software success stochastic in nature. Selecting good market segments, delivering high quality software versions in the lowest time than competitors, result in increasing demand in markets and ultimately revenues. Enhanced customer base is beneficial for current product as well as for future products of industry in the form of increased reputation and increased involvement of customers in future development. The case study was conducted with 13 representatives drawing experiences of 14 mass market projects. Results indicate that software solutions are delivered to few investors or in highly competitive markets, as per the survey's findings of the marketing departments. The software organizations are reluctant to deliver relatively complex solutions in new markets unless and until strongly convinced with the probable success. The method for selection of market segments belonging to new and existing markets for undertaking the software delivery is also proposed in this paper. The model will help software industry decide the market segments and high abstract level features that could increase probability of software success. Poor selection of markets or targeting markets of “improper” size affects the market share of the industry to a great extend.

  15. Programming language concepts for software developers

    DEFF Research Database (Denmark)

    Sestoft, Peter

    2008-01-01

    This note describes and motivates our current plans for an undergraduate course on programming language concepts for software development students. We describe the competences we expect students to acquire as well as the topics covered by the course. We plan to use C# and Scheme as instruction...

  16. High performance in software development

    CERN Multimedia

    CERN. Geneva; Haapio, Petri; Liukkonen, Juha-Matti

    2015-01-01

    What are the ingredients of high-performing software? Software development, especially for large high-performance systems, is one the most complex tasks mankind has ever tried. Technological change leads to huge opportunities but challenges our old ways of working. Processing large data sets, possibly in real time or with other tight computational constraints, requires an efficient solution architecture. Efficiency requirements span from the distributed storage and large-scale organization of computation and data onto the lowest level of processor and data bus behavior. Integrating performance behavior over these levels is especially important when the computation is resource-bounded, as it is in numerics: physical simulation, machine learning, estimation of statistical models, etc. For example, memory locality and utilization of vector processing are essential for harnessing the computing power of modern processor architectures due to the deep memory hierarchies of modern general-purpose computers. As a r...

  17. Why and how Mastering an Incremental and Iterative Software Development Process

    Science.gov (United States)

    Dubuc, François; Guichoux, Bernard; Cormery, Patrick; Mescam, Jean Christophe

    2004-06-01

    One of the key issues regularly mentioned in the current software crisis of the space domain is related to the software development process that must be performed while the system definition is not yet frozen. This is especially true for complex systems like launchers or space vehicles.Several more or less mature solutions are under study by EADS SPACE Transportation and are going to be presented in this paper. The basic principle is to develop the software through an iterative and incremental process instead of the classical waterfall approach, with the following advantages:- It permits systematic management and incorporation of requirements changes over the development cycle with a minimal cost. As far as possible the most dimensioning requirements are analyzed and developed in priority for validating very early the architecture concept without the details.- A software prototype is very quickly available. It improves the communication between system and software teams, as it enables to check very early and efficiently the common understanding of the system requirements.- It allows the software team to complete a whole development cycle very early, and thus to become quickly familiar with the software development environment (methodology, technology, tools...). This is particularly important when the team is new, or when the environment has changed since the previous development. Anyhow, it improves a lot the learning curve of the software team.These advantages seem very attractive, but mastering efficiently an iterative development process is not so easy and induces a lot of difficulties such as:- How to freeze one configuration of the system definition as a development baseline, while most of thesystem requirements are completely and naturally unstable?- How to distinguish stable/unstable and dimensioning/standard requirements?- How to plan the development of each increment?- How to link classical waterfall development milestones with an iterative approach: when

  18. Software development for a switch-based data acquisition system

    Energy Technology Data Exchange (ETDEWEB)

    Booth, A. (Superconducting Super Collider Lab., Dallas, TX (United States)); Black, D.; Walsh, D. (Fermi National Accelerator Lab., Batavia, IL (United States))

    1991-12-01

    We report on the software aspects of the development of a switch-based data acquisition system at Fermilab. This paper describes how, with the goal of providing an integrated systems engineering'' environment, several powerful software tools were put in place to facilitate extensive exploration of all aspects of the design. These tools include a simulation package, graphics package and an Expert System shell which have been integrated to provide an environment which encourages the close interaction of hardware and software engineers. This paper includes a description of the simulation, user interface, embedded software, remote procedure calls, and diagnostic software which together have enabled us to provide real-time control and monitoring of a working prototype switch-based data acquisition (DAQ) system.

  19. EPICS: A control system software co-development success story

    International Nuclear Information System (INIS)

    Knott, M.; Gurd, D.; Lewis, S.; Thuot, M.

    1993-01-01

    The Experimental Physics and Industrial Control Systems (EPICS) is the result of a software sharing and co-development effort of major importance now underway. The initial two participants, LANL and ANL, have now been joined by three other labs, and an earlier version of the software has been transferred to three commercial firms and is currently undergoing separate development. The reasons for EPICS's success may be useful to enumerate and explain and the desire and prospects for its continued development are certainly worth examining

  20. Object Oriented Software Development Using A Use-Cases Approach

    African Journals Online (AJOL)

    Object Oriented Software Development Using A Use-Cases Approach. ... to the analysis and design of an online banking system using the Use-Cases method of Jacobson. ... thus bringing the benefits of object orientation into important software projects. Journal of Applied Sciences and Environmental Management Vol.

  1. Intrinsic Motivation in Open Source Software Development

    DEFF Research Database (Denmark)

    Bitzer, J.; W., Schrettl,; Schröder, Philipp

    2004-01-01

    This papers sheds light on the puzzling evidence that even though open source software (OSS) is a public good, it is developed for free by highly qualified, young and motivated individuals, and evolves at a rapid pace. We show that once OSS development is understood as the private provision...

  2. Improving a newly developed patient-reported outcome for thyroid patients, using cognitive interviewing

    DEFF Research Database (Denmark)

    Watt, Torquil; Rasmussen, Ase Krogh; Groenvold, Mogens

    2008-01-01

    Objective To improve a newly developed patient-reported outcome measure for thyroid patients using cognitive interviewing. Methods Thirty-one interviews using immediate retrospective and expansive probing were conducted among patients with non-toxic goiter (n = 4), nodular toxic goiter (n = 5) Gr...

  3. Newly Developed Ceramic Membranes for Dehydration and Separation of Organic Mixtures by Pervaporation

    NARCIS (Netherlands)

    Gemert, van R.W.; Cuperus, F.P.

    1995-01-01

    Polymeric pervaporation membranes sometimes show great variety in performance when they are alternately used for different solvent mixtures. In addition, membrane stability in time is a problem in case of some solvents. Therefore, newly developed ceramic silica membranes with a 'dense' top layer

  4. The development and technology transfer of software engineering technology at NASA. Johnson Space Center

    Science.gov (United States)

    Pitman, C. L.; Erb, D. M.; Izygon, M. E.; Fridge, E. M., III; Roush, G. B.; Braley, D. M.; Savely, R. T.

    1992-01-01

    The United State's big space projects of the next decades, such as Space Station and the Human Exploration Initiative, will need the development of many millions of lines of mission critical software. NASA-Johnson (JSC) is identifying and developing some of the Computer Aided Software Engineering (CASE) technology that NASA will need to build these future software systems. The goal is to improve the quality and the productivity of large software development projects. New trends are outlined in CASE technology and how the Software Technology Branch (STB) at JSC is endeavoring to provide some of these CASE solutions for NASA is described. Key software technology components include knowledge-based systems, software reusability, user interface technology, reengineering environments, management systems for the software development process, software cost models, repository technology, and open, integrated CASE environment frameworks. The paper presents the status and long-term expectations for CASE products. The STB's Reengineering Application Project (REAP), Advanced Software Development Workstation (ASDW) project, and software development cost model (COSTMODL) project are then discussed. Some of the general difficulties of technology transfer are introduced, and a process developed by STB for CASE technology insertion is described.

  5. Contract-oriented software development for internet services

    DEFF Research Database (Denmark)

    Giambiagi, Pablo; Owe, Olaf; Ravn, Anders Peter

    2008-01-01

    COSoDIS (Contract-Oriented Software Development for Internet Services) develops novel approaches to implement and reason about contracts in service oriented architectures (SOA). The rationale is that system developers benefit from abstraction mechanisms to work with these architectures. Therefore...... the goal is to design and test system modeling and programming language tools to empower SOA developers to deploy highly dynamic, negotiable and monitorable Internet services....

  6. Approximator: Predicting Interruptibility in Software Development with Commodity Computers

    DEFF Research Database (Denmark)

    Tell, Paolo; Jalaliniya, Shahram; Andersen, Kristian S. M.

    2015-01-01

    Assessing the presence and availability of a remote colleague is key in coordination in global software development but is not easily done using existing computer-mediated channels. Previous research has shown that automated estimation of interruptibility is feasible and can achieve a precision....... These early but promising results represent a starting point for designing tools with support for interruptibility capable of improving distributed awareness and cooperation to be used in global software development....

  7. Development of a visualized software for tokamak experiment data processing

    International Nuclear Information System (INIS)

    Cao Jianyong; Ding Xuantong; Luo Cuiwen

    2004-01-01

    With the VBA programming in Microsoft Excel, the authors have developed a post-processing software of experimental data in tokamak. The standard formal data in the HL-1M and HL-2A tokamaks can be read, displayed in Excel, and transmitted directly into the MATLAB workspace, for displaying pictures in MATLAB with the software. The authors have also developed data post-processing software in MATLAB environment, which can read standard format data, display picture, supply visual graphical user interface and provide part of advanced signal processing ability

  8. Formal methods in software development: A road less travelled

    Directory of Open Access Journals (Sweden)

    John A van der Poll

    2010-08-01

    Full Text Available An integration of traditional verification techniques and formal specifications in software engineering is presented. Advocates of such techniques claim that mathematical formalisms allow them to produce quality, verifiably correct, or at least highly dependable software and that the testing and maintenance phases are shortened. Critics on the other hand maintain that software formalisms are hard to master, tedious to use and not well suited for the fast turnaround times demanded by industry. In this paper some popular formalisms and the advantages of using these during the early phases of the software development life cycle are presented. Employing the Floyd-Hoare verification principles during the formal specification phase facilitates reasoning about the properties of a specification. Some observations that may help to alleviate the formal-methods controversy are established and a number of formal methods successes is presented. Possible conditions for an increased acceptance of formalisms in oftware development are discussed.

  9. Development of interactive software for fuel management analysis

    International Nuclear Information System (INIS)

    Graves, H.W. Jr.

    1986-01-01

    Electronic computation plays a central part in engineering analysis of all types. Utilization of microcomputers for calculations that were formerly carried out on large mainframe computers presents a unique opportunity to develop software that not only takes advantage of the lower cost of using these machines, but also increases the efficiency of the engineers performing these calculations. This paper reviews the use of electronic computers in engineering analysis, discusses the potential for microcomputer utilization in this area, and describes a series of steps to be followed in software development that can yield significant gains in engineering design efficiency

  10. Software Development and Test Methodology for a Distributed Ground System

    Science.gov (United States)

    Ritter, George; Guillebeau, Pat; McNair, Ann R. (Technical Monitor)

    2002-01-01

    The Marshall Space Flight Center's (MSFC) Payload Operations Center (POC) ground system has evolved over a period of about 10 years. During this time the software processes have migrated from more traditional to more contemporary development processes in an effort to minimize unnecessary overhead while maximizing process benefits. The Software processes that have evolved still emphasize requirements capture, software configuration management, design documenting, and making sure the products that have been developed are accountable to initial requirements. This paper will give an overview of how the Software Processes have evolved, highlighting the positives as well as the negatives. In addition, we will mention the COTS tools that have been integrated into the processes and how the COTS have provided value to the project.

  11. Formal model-based development for safety-critical embedded software

    International Nuclear Information System (INIS)

    Kim, Jin Hyun; Choi, Jin Young

    2005-01-01

    Safety-critical embedded software for nuclear I and C system is developed under the safety and reliability regulation. Programmable logic controller(PLC) is a computer system for instrumentation and control (I and C) system of nuclear power plants. PLC consists of various I and C logics in software, including real-time operating system (RTOS). Hence, errors related with RTOS should be detected and eliminated in development processes. Practically, the verification and validation for errors in RTOS is performed in test procedure, in which a lot of tasks for testing are embedded in RTOS and are running under a test environments. But the test process can not be enough to guarantee the safety and reliability of RTOS. Therefore, in this paper, we introduce to applying formal methods with the development of software for the PLC. We particularity apply formal methods to a development of RTOS for PLC, which is a safety critical level. In this development, we use the state charts of I-Logix to specify and verification and model checking to verify the specification

  12. Formal model-based development for safety-critical embedded software

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jin Hyun; Choi, Jin Young [Korea University, seoul (Korea, Republic of)

    2005-11-15

    Safety-critical embedded software for nuclear I and C system is developed under the safety and reliability regulation. Programmable logic controller(PLC) is a computer system for instrumentation and control (I and C) system of nuclear power plants. PLC consists of various I and C logics in software, including real-time operating system (RTOS). Hence, errors related with RTOS should be detected and eliminated in development processes. Practically, the verification and validation for errors in RTOS is performed in test procedure, in which a lot of tasks for testing are embedded in RTOS and are running under a test environments. But the test process can not be enough to guarantee the safety and reliability of RTOS. Therefore, in this paper, we introduce to applying formal methods with the development of software for the PLC. We particularity apply formal methods to a development of RTOS for PLC, which is a safety critical level. In this development, we use the state charts of I-Logix to specify and verification and model checking to verify the specification.

  13. Using software-modified smartphones to validate self-reported mobile phone use in young people : A pilot study

    NARCIS (Netherlands)

    Goedhart, Geertje; Vrijheid, Martine; Wiart, Joe; Hours, Martine; Kromhout, Hans; Cardis, Elisabeth; Eastman Langer, Chelsea; de Llobet Viladoms, Patricia; Massardier-Pilonchery, Amelie; Vermeulen, Roel

    2015-01-01

    A newly developed smartphone application was piloted to characterize and validate mobile phone use in young people. Twenty-six volunteers (mean age 17.3 years) from France, Spain, and the Netherlands used a software-modified smartphone for 4 weeks; the application installed on the phone recorded

  14. Fostering Multirepresentational Levels of Chemical Concepts: A Framework to Develop Educational Software

    Science.gov (United States)

    Marson, Guilherme A.; Torres, Bayardo B.

    2011-01-01

    This work presents a convenient framework for developing interactive chemical education software to facilitate the integration of macroscopic, microscopic, and symbolic dimensions of chemical concepts--specifically, via the development of software for gel permeation chromatography. The instructional role of the software was evaluated in a study…

  15. Development of a new software for analyzing 3-D fracture network

    Science.gov (United States)

    Um, Jeong-Gi; Noh, Young-Hwan; Choi, Yosoon

    2014-05-01

    A new software is presented to analyze fracture network in 3-D. Recently, we completed the software package based on information given in EGU2013. The software consists of several modules that play roles in management of borehole data, stochastic modelling of fracture network, construction of analysis domain, visualization of fracture geometry in 3-D, calculation of equivalent pipes and production of cross-section diagrams. Intel Parallel Studio XE 2013, Visual Studio.NET 2010 and the open source VTK library were utilized as development tools to efficiently implement the modules and the graphical user interface of the software. A case study was performed to analyze 3-D fracture network system at the Upper Devonian Grosmont Formation in Alberta, Canada. The results have suggested that the developed software is effective in modelling and visualizing 3-D fracture network system, and can provide useful information to tackle the geomechanical problems related to strength, deformability and hydraulic behaviours of the fractured rock masses. This presentation describes the concept and details of the development and implementation of the software.

  16. Reliable Software Development for Machine Protection Systems

    CERN Document Server

    Anderson, D; Dragu, M; Fuchsberger, K; Garnier, JC; Gorzawski, AA; Koza, M; Krol, K; Misiowiec, K; Stamos, K; Zerlauth, M

    2014-01-01

    The Controls software for the Large Hadron Collider (LHC) at CERN, with more than 150 millions lines of code, resides amongst the largest known code bases in the world1. Industry has been applying Agile software engineering techniques for more than two decades now, and the advantages of these techniques can no longer be ignored to manage the code base for large projects within the accelerator community. Furthermore, CERN is a particular environment due to the high personnel turnover and manpower limitations, where applying Agile processes can improve both, the codebase management as well as its quality. This paper presents the successful application of the Agile software development process Scrum for machine protection systems at CERN, the quality standards and infrastructure introduced together with the Agile process as well as the challenges encountered to adapt it to the CERN environment.

  17. Development of a support software system for real-time HAL/S applications

    Science.gov (United States)

    Smith, R. S.

    1984-01-01

    Methodologies employed in defining and implementing a software support system for the HAL/S computer language for real-time operations on the Shuttle are detailed. Attention is also given to the management and validation techniques used during software development and software maintenance. Utilities developed to support the real-time operating conditions are described. With the support system being produced on Cyber computers and executable code then processed through Cyber or PDP machines, the support system has a production level status and can serve as a model for other software development projects.

  18. The digital guide to software development

    CERN Document Server

    Dickinson, Christine

    1989-01-01

    Here is the first published description of the processes and practices, tools, and methods this industry giant uses to develop its software products. This 'shirt-sleeves' guide is packed with diagrams and tables that illustrate each step in the complexsoftware development process. You'll learn all about Digital's standard 'phase review process,' the role of teams and their leaders, how CASE tools work, and how to control a project while improving productivity and product quality.

  19. Way of Working for Embedded Control Software using Model-Driven Development Techniques

    NARCIS (Netherlands)

    Bezemer, M.M.; Groothuis, M.A.; Brugali, D.; Schlegel, C.; Broenink, Johannes F.

    2011-01-01

    Embedded targets normally do not have much resources to aid developing and debugging the software. So model-driven development (MDD) is used for designing embedded software with a `first time right' approach. For such an approach, a good way of working (WoW) is required for embedded software

  20. Framework Programmable Platform for the advanced software development workstation: Framework processor design document

    Science.gov (United States)

    Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Ackley, Keith A.; Crump, Wes; Sanders, Les

    1991-01-01

    The design of the Framework Processor (FP) component of the Framework Programmable Software Development Platform (FFP) is described. The FFP is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software development environment. Guided by the model, this Framework Processor will take advantage of an integrated operating environment to provide automated support for the management and control of the software development process so that costly mistakes during the development phase can be eliminated.

  1. Human Factors in Software Development Processes: Measuring System Quality

    DEFF Research Database (Denmark)

    Abrahão, Silvia; Baldassarre, Maria Teresa; Caivano, Danilo

    2016-01-01

    Software Engineering and Human-Computer Interaction look at the development process from different perspectives. They apparently use very different approaches, are inspired by different principles and address different needs. But, they definitively have the same goal: develop high quality software...... in the most effective way. The second edition of the workshop puts particular attention on efforts of the two communities in enhancing system quality. The research question discussed is: who, what, where, when, why, and how should we evaluate?...

  2. An Investigation of Team Effectiveness in Agile Software Development

    OpenAIRE

    Haraldsen, Lars Martin Riiser

    2012-01-01

    Abstract Agile teamwork has been widely used and accepted in today's industry of software development. The methods in agile teamwork claim to improve performance and predictability, and has during the past years become the target for an emerging area of research. The majority of the existing studies concerning agile teamwork mainly focus around eXtreme Programming (XP). Abstract This report is one of few that discuss teamwork in software development having the agile methodology Scrum in the...

  3. Spacecraft Avionics Software Development Then and Now: Different but the Same

    Science.gov (United States)

    Mangieri, Mark L.; Garman, John (Jack); Vice, Jason

    2012-01-01

    NASA has always been in the business of balancing new technologies and techniques to achieve human space travel objectives. NASA s historic Software Production Facility (SPF) was developed to serve complex avionics software solutions during an era dominated by mainframes, tape drives, and lower level programming languages. These systems have proven themselves resilient enough to serve the Shuttle Orbiter Avionics life cycle for decades. The SPF and its predecessor the Software Development Lab (SDL) at NASA s Johnson Space Center (JSC) hosted flight software (FSW) engineering, development, simulation, and test. It was active from the beginning of Shuttle Orbiter development in 1972 through the end of the shuttle program in the summer of 2011 almost 40 years. NASA s Kedalion engineering analysis lab is on the forefront of validating and using many contemporary avionics HW/SW development and integration techniques, which represent new paradigms to NASA s heritage culture in avionics software engineering. Kedalion has validated many of the Orion project s HW/SW engineering techniques borrowed from the adjacent commercial aircraft avionics environment, inserting new techniques and skills into the Multi-Purpose Crew Vehicle (MPCV) Orion program. Using contemporary agile techniques, COTS products, early rapid prototyping, in-house expertise and tools, and customer collaboration, NASA has adopted a cost effective paradigm that is currently serving Orion effectively. This paper will explore and contrast differences in technology employed over the years of NASA s space program, due largely to technological advances in hardware and software systems, while acknowledging that the basic software engineering and integration paradigms share many similarities.

  4. An Introduction to Flight Software Development: FSW Today, FSW 2010

    Science.gov (United States)

    Gouvela, John

    2004-01-01

    Experience and knowledge gained from ongoing maintenance of Space Shuttle Flight Software and new development projects including Cockpit Avionics Upgrade are applied to projected needs of the National Space Exploration Vision through Spiral 2. Lessons learned from these current activities are applied to create a sustainable, reliable model for development of critical software to support Project Constellation. This presentation introduces the technologies, methodologies, and infrastructure needed to produce and sustain high quality software. It will propose what is needed to support a Vision for Space Exploration that places demands on the innovation and productivity needed to support future space exploration. The technologies in use today within FSW development include tools that provide requirements tracking, integrated change management, modeling and simulation software. Specific challenges that have been met include the introduction and integration of Commercial Off the Shelf (COTS) Real Time Operating System for critical functions. Though technology prediction has proved to be imprecise, Project Constellation requirements will need continued integration of new technology with evolving methodologies and changing project infrastructure. Targets for continued technology investment are integrated health monitoring and management, self healing software, standard payload interfaces, autonomous operation, and improvements in training. Emulation of the target hardware will also allow significant streamlining of development and testing. The methodologies in use today for FSW development are object oriented UML design, iterative development using independent components, as well as rapid prototyping . In addition, Lean Six Sigma and CMMI play a critical role in the quality and efficiency of the workforce processes. Over the next six years, we expect these methodologies to merge with other improvements into a consolidated office culture with all processes being guided by

  5. The Development Needs of Newly Appointed Senior School Leaders in the Western Cape South Africa: A Case Study

    Directory of Open Access Journals (Sweden)

    Nelius Jansen van Vuuren

    2017-12-01

    Full Text Available The essential role that senior school leaders play in school leadership teams to ensure effective strategic leadership in schools has been the subject of intense discussion for many years. Crucial to this debate is the establishment of professional learning and leadership approaches for newly appointed senior school leaders. Recommendations for policy and practice highlight the importance of appropriate, multifaceted, developmental support initiatives for newly appointed school leaders. In many countries, including South Africa, a teaching qualification and, in most cases, extensive teaching experience is the only requirement for being appointed as a senior school leader in a school. This tends to suggest that no further professional development is required for newly appointed school leaders, the problem addressed in this paper. This paper reports on the main findings of the perceived development needs of newly appointed senior school leaders in the Western Cape, South Africa, and suggests that school leaders occupy a unique and specialist role in education, which requires relevant and specific preparation to support effective leadership. The respondents of this study report a lack of contextualised training and support before and after their appointment in their new roles creating unique development needs. This paper, therefore, employs a mixed-method approach to gather data to understand the perceived needs of twenty newly appointed senior school leaders in the Western Cape, South Africa.

  6. A Roadmap to Continuous Integration for ATLAS Software Development

    Science.gov (United States)

    Elmsheuser, J.; Krasznahorkay, A.; Obreshkov, E.; Undrus, A.; ATLAS Collaboration

    2017-10-01

    The ATLAS software infrastructure facilitates efforts of more than 1000 developers working on the code base of 2200 packages with 4 million lines of C++ and 1.4 million lines of python code. The ATLAS offline code management system is the powerful, flexible framework for processing new package versions requests, probing code changes in the Nightly Build System, migration to new platforms and compilers, deployment of production releases for worldwide access and supporting physicists with tools and interfaces for efficient software use. It maintains multi-stream, parallel development environment with about 70 multi-platform branches of nightly releases and provides vast opportunities for testing new packages, for verifying patches to existing software and for migrating to new platforms and compilers. The system evolution is currently aimed on the adoption of modern continuous integration (CI) practices focused on building nightly releases early and often, with rigorous unit and integration testing. This paper describes the CI incorporation program for the ATLAS software infrastructure. It brings modern open source tools such as Jenkins and GitLab into the ATLAS Nightly System, rationalizes hardware resource allocation and administrative operations, provides improved feedback and means to fix broken builds promptly for developers. Once adopted, ATLAS CI practices will improve and accelerate innovation cycles and result in increased confidence in new software deployments. The paper reports the status of Jenkins integration with the ATLAS Nightly System as well as short and long term plans for the incorporation of CI practices.

  7. Qualified software development methodologies for nuclear class 1E equipment

    International Nuclear Information System (INIS)

    Koch, Shlomo; Ruether, J.

    1992-01-01

    This article describes the experience learned at Northern States Power and Spectrum Technologies, during the development of a computer based Safeguard Load Sequencer, for Prairie Island Nuclear Generating Plant. The Safeguard Load Sequencer (SLS) performs the function of 4kV emergency bus voltage restoration, load shedding, and emergency diesel generator loading. The system is designed around an Allen-Bradley PLC-5 programmable controller. The Safeguard Load Sequencer is the vehicle to demonstrate the software engineering procedures and methodologies. The article analyzes the requirements imposed by the NUREG 4640 handbook, and the relevant IEEE standards. The article tries to answer the question what is software engineering, and describe the waterfall life cycle phases of software development. The effects of each phase on software quality and V and V plan is described. Issues designing a V and V plan is addressed, and considerations of cost and time to implement the program are described. The article also addresses the subject of tools that can increase productivity and reduce the cost and time of an extensive V and V plan. It describes the tools the authors used, and more importantly presents a wish list of tools that they as developers would like to have. The role of testing is presented. They show that testing at the final stage has a lower impact on software quality then generally assumed. Full coverage of testing is almost always impossible, and they demonstrate how alternative audits and test during the development phase can improve software reliability

  8. Software Development Infrastructure for the FAIR Experiments

    International Nuclear Information System (INIS)

    Uhlig, F; Al-Turany, M; Bertini, D; Karabowicz, R

    2011-01-01

    The proposed project FAIR (Facility for Anti-proton and Ion Research) is an international accelerator facility of the next generation. It builds on top of the experience and technological developments already made at the existing GSI facility, and incorporate new technological concepts. The four scientific pillars of FAIR are NUSTAR (nuclear structure and astrophysics), PANDA (QCD studies with cooled beams of anti-protons), CBM (physics of hadronic matter at highest baryon densities), and APPA (atomic physics, plasma physics, and applications). The FairRoot framework used by all of the big FAIR experiments as a base for their own specific developments, provides basic functionality like IO, geometry handling etc. The challenge is to support all the different experiments with their heterogeneous requirements. Due to the limited manpower, one of the first design decisions was to (re)use as much as possible already available and tested software and to focus on the development of the framework. Beside the framework itself, the FairRoot core team also provides some software development tools. We will describe the complete set of tools in this article. The Makefiles for all projects are generated using CMake. For software testing and the corresponding quality assurance, we use CTest to generate the results and CDash as web front end. The tools are completed by subversion as source code repository and trac as tool for the complete source code management. This set of tools allows us to offer the full functionality we have for FairRoot also to the experiments based on FairRoot.

  9. Development of Cross-Platform Software for Well Logging Data Visualization

    Science.gov (United States)

    Akhmadulin, R. K.; Miraev, A. I.

    2017-07-01

    Well logging data processing is one of the main sources of information in the oil-gas field analysis and is of great importance in the process of its development and operation. Therefore, it is important to have the software which would accurately and clearly provide the user with processed data in the form of well logs. In this work, there have been developed a software product which not only has the basic functionality for this task (loading data from .las files, well log curves display, etc.), but can be run in different operating systems and on different devices. In the article a subject field analysis and task formulation have been performed, and the software design stage has been considered. At the end of the work the resulting software product interface has been described.

  10. Development of requirements tracking and verification technology for the NPP software

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Chul Hwan; Kim, Jang Yeol; Lee, Jang Soo; Song, Soon Ja; Lee, Dong Young; Kwon, Kee Choon

    1998-12-30

    Searched and analyzed the technology of requirements engineering in the areas of aerospace and defense industry, medical industry and nuclear industry. Summarized the status of tools for the software design and requirements management. Analyzed the software design methodology for the safety software of NPP. Development of the design requirements for the requirements tracking and verification system. Development of the background technology to design the prototype tool for the requirements tracking and verification.

  11. Development of requirements tracking and verification technology for the NPP software

    International Nuclear Information System (INIS)

    Jung, Chul Hwan; Kim, Jang Yeol; Lee, Jang Soo; Song, Soon Ja; Lee, Dong Young; Kwon, Kee Choon

    1998-01-01

    Searched and analyzed the technology of requirements engineering in the areas of aerospace and defense industry, medical industry and nuclear industry. Summarized the status of tools for the software design and requirements management. Analyzed the software design methodology for the safety software of NPP. Development of the design requirements for the requirements tracking and verification system. Development of the background technology to design the prototype tool for the requirements tracking and verification

  12. Development of a Nevada Statewide Database for Safety Analyst Software

    Science.gov (United States)

    2017-02-02

    Safety Analyst is a software package developed by the Federal Highway Administration (FHWA) and twenty-seven participating state and local agencies including the Nevada Department of Transportation (NDOT). The software package implemented many of the...

  13. User Studies: Developing Learning Strategy Tool Software for Children.

    Science.gov (United States)

    Fitzgerald, Gail E.; Koury, Kevin A.; Peng, Hsinyi

    This paper is a report of user studies for developing learning strategy tool software for children. The prototype software demonstrated is designed for children with learning and behavioral disabilities. The tools consist of easy-to-use templates for creating organizational, memory, and learning approach guides for use in classrooms and at home.…

  14. Software Development Process Improvement in Datacom Platform

    OpenAIRE

    Trabelsi, Walid

    2008-01-01

    Masteroppgave i Informasjons- og Kommunikasjonsteknologi 2008, Universitetet i Agder, Grimstad Ericsson Mobile Platform (EMP) is responsible of the development of a software platform and also to some extend responsible for related hardware parts. EMP is developing the data communication parts of the platform which is used by EMP customers. The platform development is done in large development programs and each program span over a quite a long time period. However, as we see eve...

  15. Coordinating Management Activities in Distributed Software Development Projects

    OpenAIRE

    Bendeck, Fawsy; Goldmann, Sigrid; Holz, Harald; Kötting, Boris

    1999-01-01

    Coordinating distributed processes, especially engineering and software design processes, has been a research topic for some time now. Several approaches have been published that aim at coordinating large projects in general, and large software development processes in specific. However, most of these approaches focus on the technical part of the design process and omit management activities like planning and scheduling the project, or monitoring it during execution. In this paper, we focus o...

  16. The development of test software for the inadequate core cooling monitoring system

    International Nuclear Information System (INIS)

    Lee, Soon Sung.

    1996-06-01

    The test software including the ICCMS simulator which is necessary for dynamic test for the ICCMS software in PWR is developed. The developed dynamic test software consists of the module test simulator, the integration test simulator, and the test result analyser. The simulator was programmed by C language according to the same algorithm requirements for the FORTRAN version ICCMS software, and also for the Factory Acceptance Test (FAT). And the simulator can be used as training tool for the reactor operator and system development tool for the performance improvement. (author). 4 tabs., 8 figs., 11 refs

  17. Software Development for the Hobby-Eberly Telescope's Segment Alignment Maintenance System using LABView

    Science.gov (United States)

    Hall, Drew P.; Ly, William; Howard, Richard T.; Weir, John; Rakoczy, John; Roe, Fred (Technical Monitor)

    2002-01-01

    The software development for an upgrade to the Hobby-Eberly Telescope (HET) was done in LABView. In order to improve the performance of the HET at the McDonald Observatory, a closed-loop system had to be implemented to keep the mirror segments aligned during periods of observation. The control system, called the Segment Alignment Maintenance System (SAMs), utilized inductive sensors to measure the relative motions of the mirror segments. Software was developed in LABView to tie the sensors, operator interface, and mirror-control motors together. Developing the software in LABView allowed the system to be flexible, understandable, and able to be modified by the end users. Since LABView is built using block diagrams, the software naturally followed the designed control system's block and flow diagrams, and individual software blocks could be easily verified. LABView's many built-in display routines allowed easy visualization of diagnostic and health-monitoring data during testing. Also, since LABView is a multi-platform software package, different programmers could develop the code remotely on various types of machines. LABView s ease of use facilitated rapid prototyping and field testing. There were some unanticipated difficulties in the software development, but the use of LABView as the software "language" for the development of SAMs contributed to the overall success of the project.

  18. Development of Software for dose Records Data Base Access

    International Nuclear Information System (INIS)

    Amaro, M.

    1990-01-01

    The CIEMAT personal dose records are computerized in a Dosimetric Data Base whose primary purpose was the individual dose follow-up control and the data handling for epidemiological studies. Within the Data Base management scheme, software development to allow searching of individual dose records by external authorised users was undertaken. The report describes the software developed to allow authorised persons to visualize on screen a summary of the individual dose records from workers included in the Data Base. The report includes the User Guide for the authorised list of users and listings of codes and subroutines developed. (Author) 2 refs

  19. Framework Programmable Platform for the Advanced Software Development Workstation: Preliminary system design document

    Science.gov (United States)

    Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Ackley, Keith A.; Crump, John W., IV; Henderson, Richard; Futrell, Michael T.

    1991-01-01

    The Framework Programmable Software Development Platform (FPP) is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software environment. Guided by the model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated. The focus here is on the design of components that make up the FPP. These components serve as supporting systems for the Integration Mechanism and the Framework Processor and provide the 'glue' that ties the FPP together. Also discussed are the components that allow the platform to operate in a distributed, heterogeneous environment and to manage the development and evolution of software system artifacts.

  20. Accelerating NASA GN&C Flight Software Development

    Science.gov (United States)

    Tamblyn, Scott; Henry, Joel; Rapp, John

    2010-01-01

    When the guidance, navigation, and control (GN&C) system for the Orion crew vehicle undergoes Critical Design Review (CDR), more than 90% of the flight software will already be developed - a first for NASA on a project of this scope and complexity. This achievement is due in large part to a new development approach using Model-Based Design.

  1. Custom software development for use in a clinical laboratory.

    Science.gov (United States)

    Sinard, John H; Gershkovich, Peter

    2012-01-01

    In-house software development for use in a clinical laboratory is a controversial issue. Many of the objections raised are based on outdated software development practices, an exaggeration of the risks involved, and an underestimation of the benefits that can be realized. Buy versus build analyses typically do not consider total costs of ownership, and unfortunately decisions are often made by people who are not directly affected by the workflow obstacles or benefits that result from those decisions. We have been developing custom software for clinical use for over a decade, and this article presents our perspective on this practice. A complete analysis of the decision to develop or purchase must ultimately examine how the end result will mesh with the departmental workflow, and custom-developed solutions typically can have the greater positive impact on efficiency and productivity, substantially altering the decision balance sheet. Involving the end-users in preparation of the functional specifications is crucial to the success of the process. A large development team is not needed, and even a single programmer can develop significant solutions. Many of the risks associated with custom development can be mitigated by a well-structured development process, use of open-source tools, and embracing an agile development philosophy. In-house solutions have the significant advantage of being adaptable to changing departmental needs, contributing to efficient and higher quality patient care.

  2. Characterizing the Development and Usage of Diagrams in Embedded Software Systems

    NARCIS (Netherlands)

    Akdur, Deniz; Demirörs, Onur; Garousi, V.

    2017-01-01

    To cope with growing complexity of embedded software, modeling has become popular. The usage of models in embedded software industry and the relevant practices usually vary since the purposes of diagram development and usage differ. Since a large variety of software modeling practices used in

  3. A model-based software development methodology for high-end automotive components

    NARCIS (Netherlands)

    Ravanan, Mahmoud

    2014-01-01

    This report provides a model-based software development methodology for high-end automotive components. The V-model is used as a process model throughout the development of the software platform. It offers a framework that simplifies the relation between requirements, design, implementation,

  4. Development of tools for safety analysis of control software in advanced reactors

    International Nuclear Information System (INIS)

    Guarro, S.; Yau, M.; Motamed, M.

    1996-04-01

    Software based control systems have gained a pervasive presence in a wide variety of applications, including nuclear power plant control and protection systems which are within the oversight and licensing responsibility of the US Nuclear Regulatory Commission. While the cost effectiveness and flexibility of software based plant process control is widely recognized, it is very difficult to achieve and prove high levels of demonstrated dependability and safety assurance for the functions performed by process control software, due to the very flexibility and potential complexity of the software itself. The development of tools to model, analyze and test software design and implementations in the context of the system that the software is designed to control can greatly assist the task of providing higher levels of assurance than those obtainable by software testing alone. This report presents and discusses the development of the Dynamic Flowgraph Methodology (DFM) and its application in the dependability and assurance analysis of software-based control systems. The features of the methodology and full-scale examples of application to both generic process and nuclear power plant control systems are presented and discussed in detail. The features of a workstation software tool developed to assist users in the application of DFM are also described

  5. Development of tools for safety analysis of control software in advanced reactors

    Energy Technology Data Exchange (ETDEWEB)

    Guarro, S.; Yau, M.; Motamed, M. [Advanced Systems Concepts Associates, El Segundo, CA (United States)

    1996-04-01

    Software based control systems have gained a pervasive presence in a wide variety of applications, including nuclear power plant control and protection systems which are within the oversight and licensing responsibility of the US Nuclear Regulatory Commission. While the cost effectiveness and flexibility of software based plant process control is widely recognized, it is very difficult to achieve and prove high levels of demonstrated dependability and safety assurance for the functions performed by process control software, due to the very flexibility and potential complexity of the software itself. The development of tools to model, analyze and test software design and implementations in the context of the system that the software is designed to control can greatly assist the task of providing higher levels of assurance than those obtainable by software testing alone. This report presents and discusses the development of the Dynamic Flowgraph Methodology (DFM) and its application in the dependability and assurance analysis of software-based control systems. The features of the methodology and full-scale examples of application to both generic process and nuclear power plant control systems are presented and discussed in detail. The features of a workstation software tool developed to assist users in the application of DFM are also described.

  6. IT Software Development and IT Operations Strategic Alignment: An Agile DevOps Model

    Science.gov (United States)

    Hart, Michael

    2017-01-01

    Information Technology (IT) departments that include development and operations are essential to develop software that meet customer needs. DevOps is a term originally constructed from software development and IT operations. DevOps includes the collaboration of all stakeholders such as software engineers and systems administrators involved in the…

  7. Management of Software Development Projects

    Directory of Open Access Journals (Sweden)

    Felician ALECU

    2011-04-01

    Full Text Available Any major software development starts with the Initiating process group. Once the charter document is approved, the Planning and then to the Executing stages will follow. Monitoring and Controlling is measuring the potential performance deviation of the project in terms of schedule and costs and performs the related Integrated Change Control activities. At the end, during the Closing, the program/project manager will check the entire work is completed and the objectives are met.

  8. Software development on the SAP HANA platform

    CERN Document Server

    Walker, Mark

    2013-01-01

    Software Development on the SAP HANA Platform is a general tutorial guide to SAP HANA.This book is written for beginners to the SAP HANA platform. No knowledge of SAP HANA is necessary to start using this book.

  9. Software safety analysis on the model specified by NuSCR and SMV input language at requirements phase of software development life cycle using SMV

    International Nuclear Information System (INIS)

    Koh, Kwang Yong; Seong, Poong Hyun

    2005-01-01

    Safety-critical software process is composed of development process, verification and validation (V and V) process and safety analysis process. Safety analysis process has been often treated as an additional process and not found in a conventional software process. But software safety analysis (SSA) is required if software is applied to a safety system, and the SSA shall be performed independently for the safety software through software development life cycle (SDLC). Of all the phases in software development, requirements engineering is generally considered to play the most critical role in determining the overall software quality. NASA data demonstrate that nearly 75% of failures found in operational software were caused by errors in the requirements. The verification process in requirements phase checks the correctness of software requirements specification, and the safety analysis process analyzes the safety-related properties in detail. In this paper, the method for safety analysis at requirements phase of software development life cycle using symbolic model verifier (SMV) is proposed. Hazard is discovered by hazard analysis and in other to use SMV for the safety analysis, the safety-related properties are expressed by computation tree logic (CTL)

  10. Visual gene developer: a fully programmable bioinformatics software for synthetic gene optimization

    Directory of Open Access Journals (Sweden)

    McDonald Karen

    2011-08-01

    Full Text Available Abstract Background Direct gene synthesis is becoming more popular owing to decreases in gene synthesis pricing. Compared with using natural genes, gene synthesis provides a good opportunity to optimize gene sequence for specific applications. In order to facilitate gene optimization, we have developed a stand-alone software called Visual Gene Developer. Results The software not only provides general functions for gene analysis and optimization along with an interactive user-friendly interface, but also includes unique features such as programming capability, dedicated mRNA secondary structure prediction, artificial neural network modeling, network & multi-threaded computing, and user-accessible programming modules. The software allows a user to analyze and optimize a sequence using main menu functions or specialized module windows. Alternatively, gene optimization can be initiated by designing a gene construct and configuring an optimization strategy. A user can choose several predefined or user-defined algorithms to design a complicated strategy. The software provides expandable functionality as platform software supporting module development using popular script languages such as VBScript and JScript in the software programming environment. Conclusion Visual Gene Developer is useful for both researchers who want to quickly analyze and optimize genes, and those who are interested in developing and testing new algorithms in bioinformatics. The software is available for free download at http://www.visualgenedeveloper.net.

  11. Building Software Development Capacity to Advance the State of Educational Technology

    Science.gov (United States)

    Luterbach, Kenneth J.

    2013-01-01

    Educational technologists may advance the state of the field by increasing capacity to develop software tools and instructional applications. Presently, few academic programs in educational technology require even a single computer programming course. Further, the educational technologists who develop software generally work independently or in…

  12. Programming for the Newton software development with NewtonScript

    CERN Document Server

    McKeehan, Julie

    1994-01-01

    Programming for the Newton: Software Development with NewtonScript focuses on the processes, approaches, operations, and principles involved in software development with NewtonScript.The publication first elaborates on Newton application design, views on the Newton, and protos. Discussions focus on system protos, creating and using user protos, linking and naming templates, creating the views of WaiterHelper, Newton application designs, and life cycle of an application. The text then elaborates on the fundamentals of NewtonScript, inheritance in NewtonScript, and view system and messages. Topi

  13. Real-time Control Mediation in Agile Distributed Software Development

    DEFF Research Database (Denmark)

    Persson, John Stouby; Aaen, Ivan; Mathiassen, Lars

    2008-01-01

    Agile distributed environments pose particular challenges related to control of quality and collaboration in software development. Moreover, while face-to-face interaction is fundamental in agile development, distributed environments must rely extensively on mediated interactions. On this backdrop...... control was mediated over distance by technology through real-time exchanges. Contrary to previous research, the analysis suggests that both formal and informal elements of real-time mediated control were used; that evolving goals and adjustment of expectations were two of the main issues in real......-time mediated control exchanges; and, that the actors, despite distances in space and culture, developed a clan-like pattern mediated by technology to help control quality and collaboration in software development....

  14. Calibration Analysis Software for the ATLAS Pixel Detector

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00372086; The ATLAS collaboration

    2016-01-01

    The calibration of the ATLAS Pixel detector at LHC fulfils two main purposes: to tune the front-end configuration parameters for establishing the best operational settings and to measure the tuning performance through a subset of scans. An analysis framework has been set up in order to take actions on the detector given the outcome of a calibration scan (e.g. to create a mask for disabling noisy pixels). The software framework to control all aspects of the Pixel detector scans and analyses is called Calibration Console. The introduction of a new layer, equipped with new Front End-I4 Chips, required an update the Console architecture. It now handles scans and scans analyses applied together to chips with different characteristics. An overview of the newly developed Calibration Analysis Software will be presented, together with some preliminary result.

  15. The MEDA Project: Developing Evaluation Competence in the Training Software Domain.

    Science.gov (United States)

    Machell, Joan; Saunders, Murray

    1992-01-01

    The MEDA (Methodologie d'Evaluation des Didacticiels pour les Adultes) tool is a generic instrument to evaluate training courseware. It was developed for software designers to improve products, for instructors to select appropriate courseware, and for distributors and consultants to match software to client needs. Describes software evaluation…

  16. Validating self-reported mobile phone use in adults using a newly developed smartphone application

    NARCIS (Netherlands)

    Goedhart, Geertje; Kromhout, Hans; Wiart, Joe; Vermeulen, Roel

    2015-01-01

    OBJECTIVE: Interpretation of epidemiological studies on health effects from mobile phone use is hindered by uncertainties in the exposure assessment. We used a newly developed smartphone application (app) to validate self-reported mobile phone use and behaviour among adults. METHODS: 107

  17. Introducing the RadBioStat Educational Software: Computer-Assisted Teaching of the Random Nature of Cell Killing

    Directory of Open Access Journals (Sweden)

    Safari A

    2014-06-01

    Full Text Available The interaction of radiation with cells and tissues has a random nature. Therefore, understanding the random nature of cell killing that is determined by Poisson distribution statistics is an essential point in education of radiation biology. RadBioStat is a newly developed educational MATLAB-based software designed for computer-assisted learning of the target theory in radiation biology. Although its potential applications is developing rapidly, currently RadBioStat software can be a useful tool in computerassisted education of radiobiological models such as single target single hit, multiple target single hit and multiple target multiple hit. Scholars’ feedback is valuable to the producers of this software and help them continuously improve this product, add new features and increase its desirability and functionality.

  18. Social software in global software development

    DEFF Research Database (Denmark)

    Giuffrida, Rosalba; Dittrich, Yvonne

    2010-01-01

    variety of tools such as: instant messaging, internet forums, mailing lists, blogs, wikis, social network sites, social bookmarking, social libraries, virtual worlds. Though normally rather belonging to the private realm, the use of social software in corporate context has been reported, e.g. as a way...

  19. DEVELOPMENT OF USABILITY CRITERIA FOR E-LEARNING CONTENT DEVELOPMENT SOFTWARE

    Directory of Open Access Journals (Sweden)

    Serkan ÇELIK

    2012-04-01

    Full Text Available Revolutionary advancements have been observed in e-learning technologies though an amalgamated evaluation methodology for new generation e-learning content development tools is not available. The evaluation of educational software for online use must consider its usability and as well as its pedagogic effectiveness. This study is a first step towards the definition of criteria for evaluating e-learning tools. A preliminary user study involving a group of pre-service instructional designers, observed during their interaction with e-learning tools, is reported. Throughout the study, specific usability attributes of these e-learning tools were identified. Participants were assigned to rate the importance of functional and pedagogical competences proposed during the criteria development phase. The findings of the study revealed 31 evaluation criteria under the headings of technical, media, and assessment competences. Among the groups of benchmarks proposed and rated by the users, assessment was considered as the most important one while technical and media features were even.The following step was actual implemention of the usability criteria into evaluation of fifteen leading software used in e-learning across the world. Mostly, tools were observed as having limitations in terms of capabilities. Comparing to the other software, Captivate, Softchalk, and Lectora were regarded as outstanding tools by the participants. Following the discussion on the limitations of the study, some implications for further research were proposed.

  20. Study on safety classifications of software used in nuclear power plants and distinct applications of verification and validation activities in each class

    International Nuclear Information System (INIS)

    Kim, B. R.; Oh, S. H.; Hwang, H. S.; Kim, D. I.

    2000-01-01

    This paper describes the safety classification regarding instrumentation and control (I and C) systems and their software used in nuclear power plants, provides regulatory positions for software important to safety, and proposes verification and validation (V and V) activities applied differently in software classes which are important elements in ensuring software quality assurance. In other word, the I and C systems important to safety are classified into IC-1, IC-2, IC-3, and Non-IC and their software are classified into safety-critical, safety-related, and non-safety software. Based upon these safety classifications, the extent of software V and V activities in each class is differentiated each other. In addition, the paper presents that the software for use in I and C systems important to safety is divided into newly-developed and previously-developed software in terms of design and implementation, and provides the regulatory positions on each type of software

  1. Development of the interface software for the Antarctic penetrator

    Directory of Open Access Journals (Sweden)

    Kazuo Shibuya

    2005-11-01

    Full Text Available We have developed PC-based interface software which controls ground system segments (GSSs of the Antarctic penetrator through an automatic data collection system onboard a helicopter. A pen-touch panel was developed for easy operation. There are six basic functions in the interface software; GSS time synchronization", make schedule file", send schedule file", GSS time calibration", data read-out", and sleep". The sleep command enables us to cut off the radio transmitter/receiver to save power during a pre-determined period. After execution of each command, log files are saved automatically. In order to monitor processing by eye, a bar graph appears during execution of time synchronization" and data read-out". As for malfunctioning encountered during the 43rd Japanese Antarctic Research Expedition, the related software bugs were identified and the codes were rewritten.

  2. Dedicated algorithm and software for the integrated analysis of AC and DC electrical outputs of piezoelectric vibration energy harvesters

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Eum [Catholic University of Daegu, Gyeongsan (Korea, Republic of)

    2014-10-15

    DC electrical outputs of a piezoelectric vibration energy harvester by nonlinear rectifying circuitry can hardly be obtained either by any mathematical models developed so far or by finite element analysis. To address the issue, this work used an equivalent electrical circuit model and newly developed an algorithm to efficiently identify relevant circuit parameters of arbitrarily-shaped cantilevered piezoelectric energy harvesters. The developed algorithm was then realized as a dedicated software module by adopting ANSYS finite element analysis software for the parameters identification and the Tcl/Tk programming language for a graphical user interface and linkage with ANSYS. For verifications, various AC electrical outputs by the developed software were compared with those by traditional finite element analysis. DC electrical outputs through rectifying circuitry were also examined for varying values of the smoothing capacitance and load resistance.

  3. Dedicated algorithm and software for the integrated analysis of AC and DC electrical outputs of piezoelectric vibration energy harvesters

    International Nuclear Information System (INIS)

    Kim, Jae Eum

    2014-01-01

    DC electrical outputs of a piezoelectric vibration energy harvester by nonlinear rectifying circuitry can hardly be obtained either by any mathematical models developed so far or by finite element analysis. To address the issue, this work used an equivalent electrical circuit model and newly developed an algorithm to efficiently identify relevant circuit parameters of arbitrarily-shaped cantilevered piezoelectric energy harvesters. The developed algorithm was then realized as a dedicated software module by adopting ANSYS finite element analysis software for the parameters identification and the Tcl/Tk programming language for a graphical user interface and linkage with ANSYS. For verifications, various AC electrical outputs by the developed software were compared with those by traditional finite element analysis. DC electrical outputs through rectifying circuitry were also examined for varying values of the smoothing capacitance and load resistance.

  4. Managing Risk Areas in Software Development Offshoring

    DEFF Research Database (Denmark)

    Persson, John Stouby; Schlichter, Bjarne Rerup

    2015-01-01

    Software companies are increasingly offshoring development to countries with high expertise at lower cost. Offshoring involves particular risk areas that if ignored increase the likelihood of failure. However, the offshoring client’s maturity level may influence the management of these risk areas...

  5. Empirical Studies of Agile Software Development to Learn Programming Skills

    Directory of Open Access Journals (Sweden)

    Yasuyo Kofune

    2014-06-01

    Full Text Available This paper presents a programming education support method based on Agile Development that encourages and builds on communication between students. Through mutual discussion, students using our approach transform their ideas into software and cooperate to write a program. The students complete the software through repetition and programming. Before completing the software program, the students learn to solve problems by working together. The students are encouraged to think and share ideas, and gain experience writing software. With this approach, students not only learn how to write programs, but also increase their logical thinking, problem-solving, and communication skills.

  6. Cost Estimation of Software Development and the Implications for the Program Manager

    Science.gov (United States)

    1992-06-01

    Software Lifecycle Model (SLIM), the Jensen System-4 model, the Software Productivity, Quality, and Reliability Estimator ( SPQR \\20), the Constructive...function models in current use are the Software Productivity, Quality, and Reliability Estimator ( SPQR /20) and the Software Architecture Sizing and...Estimator ( SPQR /20) was developed by T. Capers Jones of Software Productivity Research, Inc., in 1985. The model is intended to estimate the outcome

  7. Ed Tech Developer's Guide: A Primer for Software Developers, Startups, and Entrepreneurs

    Science.gov (United States)

    Bienkowski, Marie; Gerard, Sarah Nixon; Rubin, Shawn; Sanford, Cathy; Borrelli-Murray, Dana; Driscoll, Tom; Arora, Jessie; Hruska, Mike; Beck, Katie; Murray, Thomas; Hoekstra, Jason; Gannes, Stuart; Metz, Edward; Midgley, Steve; Castilla, Stephanie; Tomassini, Jason; Madda, Mary Jo; Chase, Zac; Martin, Erik; Noel, Marcus; Styles, Kathleen

    2015-01-01

    Opportunities abound for software designers and developers to create impactful tools for teachers, school leaders, students, and their families. This guide for developers, startups, and entrepreneurs addresses key questions about the education ecosystem and highlights critical needs and opportunities to develop digital tools and apps for learning.…

  8. A Systematic Analysis of Functional Safety Certification Practices in Industrial Robot Software Development

    Directory of Open Access Journals (Sweden)

    Tong Xie

    2017-01-01

    Full Text Available For decades, industry robotics have delivered on the promise of speed, efficiency and productivity. The last several years have seen a sharp resurgence in the orders of industrial robots in China, and the areas addressed within industrial robotics has extended into safety-critical domains. However, safety standards have not yet been implemented widely in academia and engineering applications, particularly in robot software development. This paper presents a systematic analysis of functional safety certification practices in software development for the safety-critical software of industrial robots, to identify the safety certification practices used for the development of industrial robots in China and how these practices comply with the safety standard requirements. Reviewing from Chinese academic papers, our research shows that safety standards are barely used in software development of industrial robot. The majority of the papers propose various solutions to achieve safety, but only about two thirds of the papers refer to non-standardized approaches that mainly address the systematic level rather than the software development level. In addition, our research shows that with the development of artificial intelligent, an emerging field is still on the quest for standardized and suitable approaches to develop safety-critical software.

  9. Developing Software For Monitoring And Diagnosis

    Science.gov (United States)

    Edwards, S. J.; Caglayan, A. K.

    1993-01-01

    Expert-system software shell produces executable code. Report discusses beginning phase of research directed toward development of artificial intelligence for real-time monitoring of, and diagnosis of faults in, complicated systems of equipment. Motivated by need for onboard monitoring and diagnosis of electronic sensing and controlling systems of advanced aircraft. Also applicable to such equipment systems as refineries, factories, and powerplants.

  10. Problems in software development for nuclear robotics

    International Nuclear Information System (INIS)

    Shinohara, Yoshikuni

    1986-01-01

    Major technical problems in developing softwares for intelligent robots for future nuclear applications are explained briefly. In order that a robot can perform various kinds of complex works, it must be equipped with a high level of artificial intelligence which includes sensing functions such as visiual, auditory, tactile, proximity sensing, cognitive functions such as recognition of objects and understanding of working environment, decision-making functions such as work planning and control functions such as manipulator and locomotion controls. A large amount of various kinds of signals and informations must be processed with a high speed for an integrated control of these functions. It will be desirable that the computer program for controlling a robot which must run in a real-time will have a functionally hierarchical and distributed structure from the view point of software development. Parallel processing will be required from the view point of computation time. (author)

  11. Developing a TTCN-3 Test Harness for Legacy Software

    DEFF Research Database (Denmark)

    Okika, Joseph C.; Ravn, Anders Peter; Siddalingaiah, Lokesh

    2006-01-01

    We describe a prototype test harness for an embedded system which is the control software for a modern marine diesel engine. The operations of such control software requires complete certification. We adopt Testing and Test Control Notation (TTCN-3) to define test cases for this purpose. The main...... challenge in developing the test harness is to interface a generic test driver to the legacy software and provide a suitable interface for test engineers. The main contribution of this paper is a demonstration of a suitable design for such a test harness. It includes: a TTCN-3 test driver in C++, the legacy...

  12. Experiences in Teaching a Graduate Course on Model-Driven Software Development

    Science.gov (United States)

    Tekinerdogan, Bedir

    2011-01-01

    Model-driven software development (MDSD) aims to support the development and evolution of software intensive systems using the basic concepts of model, metamodel, and model transformation. In parallel with the ongoing academic research, MDSD is more and more applied in industrial practices. After being accepted both by a broad community of…

  13. Hybrid Software and System Development in Practice: Waterfall, Scrum, and Beyond

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Diebold, Philipp; Münch, Jürgen

    2017-01-01

    Software and system development faces numerous challenges of rapidly changing markets. To address such challenges, companies and projects design and adopt specific development approaches by combining well-structured comprehensive methods and flexible agile practices. Yet, the number of methods...... and practices is large, and available studies argue that the actual process composition is carried out in a fairly ad-hoc manner. The present paper reports on a survey on hybrid software development approaches. We study which approaches are used in practice, how different approaches are combined, and what...... contextual factors influence the use and combination of hybrid software development approaches. Our results from 69 study participants show a variety of development approaches used and combined in practice. We show that most combinations follow a pattern in which a traditional process model serves...

  14. Assessing College Students' Perceptions of a Case Teacher's Pedagogical Content Knowledge Using a Newly Developed Instrument

    Science.gov (United States)

    Jang, Syh-Jong

    2011-01-01

    Ongoing professional development for college teachers has been much emphasized. However, previous research on learning environments has seldom addressed college students' perceptions of teachers' PCK. This study aimed to evaluate college students' perceptions of a physics teacher's PCK development using a newly developed instrument and workshop…

  15. Alinhando objetivos estratégicos e processo de desenvolvimento em empresas de software Aligning strategic objectives and development practices at software companies

    Directory of Open Access Journals (Sweden)

    André Leme Fleury

    2013-01-01

    Full Text Available Sistemas de software são atualmente responsáveis por parte significativa das inovações tecnológicas viabilizadas em produtos e serviços. A história do software é recente, assim como são recentes as pesquisas sobre o tema, que tem como foco principal o aprimoramento dos seus processos de desenvolvimento. Apesar das contribuições trazidas por essas teorias, a questão do alinhamento entre objetivos estratégicos e o processo de desenvolvimento nas empresas de software considerando as suas principais capacidades produtivas permanece um tema inexplorado. Como consequência, técnicas da engenharia de software são aplicadas sem incorporar considerações de valor nos processos de análise e na tomada de decisões. Este artigo analisa e apresenta soluções para duas questões: como diferenciar as empresas de software de acordo com seus processos produtivos mais relevantes e como garantir que esses processos de desenvolvimento encontram-se alinhados com os objetivos do negócio. A abordagem resultante inclui um referencial para classificação de empresas de software e uma técnica de planejamento tecnológico para essas empresas. O projeto de pesquisa incluiu a realização de surveys, pesquisa-ação e estudos de caso.Software systems are currently responsible for a significant part of the technological innovations introduced in products and services. software history is recent and research concerning software usually aims to improve process capabilities. Despite the contributions of these theories, questions concerning the alignment between strategic objectives and development process at software companies considering their most important capabilities have not been clarified. Consequently, software engineering techniques are applied without value considerations for analysis and decision. This paper analyses and proposes solutions for two issues: how to differentiate software companies according with their most relevant development

  16. Software development methodology for computer based I&C systems of prototype fast breeder reactor

    International Nuclear Information System (INIS)

    Manimaran, M.; Shanmugam, A.; Parimalam, P.; Murali, N.; Satya Murty, S.A.V.

    2015-01-01

    Highlights: • Software development methodology adopted for computer based I&C systems of PFBR is detailed. • Constraints imposed as part of software requirements and coding phase are elaborated. • Compliance to safety and security requirements are described. • Usage of CASE (Computer Aided Software Engineering) tools during software design, analysis and testing phase are explained. - Abstract: Prototype Fast Breeder Reactor (PFBR) is sodium cooled reactor which is in the advanced stage of construction in Kalpakkam, India. Versa Module Europa bus based Real Time Computer (RTC) systems are deployed for Instrumentation & Control of PFBR. RTC systems have to perform safety functions within the stipulated time which calls for highly dependable software. Hence, well defined software development methodology is adopted for RTC systems starting from the requirement capture phase till the final validation of the software product. V-model is used for software development. IEC 60880 standard and AERB SG D-25 guideline are followed at each phase of software development. Requirements documents and design documents are prepared as per IEEE standards. Defensive programming strategies are followed for software development using C language. Verification and validation (V&V) of documents and software are carried out at each phase by independent V&V committee. Computer aided software engineering tools are used for software modelling, checking for MISRA C compliance and to carry out static and dynamic analysis. Various software metrics such as cyclomatic complexity, nesting depth and comment to code are checked. Test cases are generated using equivalence class partitioning, boundary value analysis and cause and effect graphing techniques. System integration testing is carried out wherein functional and performance requirements of the system are monitored

  17. Software development methodology for computer based I&C systems of prototype fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Manimaran, M., E-mail: maran@igcar.gov.in; Shanmugam, A.; Parimalam, P.; Murali, N.; Satya Murty, S.A.V.

    2015-10-15

    Highlights: • Software development methodology adopted for computer based I&C systems of PFBR is detailed. • Constraints imposed as part of software requirements and coding phase are elaborated. • Compliance to safety and security requirements are described. • Usage of CASE (Computer Aided Software Engineering) tools during software design, analysis and testing phase are explained. - Abstract: Prototype Fast Breeder Reactor (PFBR) is sodium cooled reactor which is in the advanced stage of construction in Kalpakkam, India. Versa Module Europa bus based Real Time Computer (RTC) systems are deployed for Instrumentation & Control of PFBR. RTC systems have to perform safety functions within the stipulated time which calls for highly dependable software. Hence, well defined software development methodology is adopted for RTC systems starting from the requirement capture phase till the final validation of the software product. V-model is used for software development. IEC 60880 standard and AERB SG D-25 guideline are followed at each phase of software development. Requirements documents and design documents are prepared as per IEEE standards. Defensive programming strategies are followed for software development using C language. Verification and validation (V&V) of documents and software are carried out at each phase by independent V&V committee. Computer aided software engineering tools are used for software modelling, checking for MISRA C compliance and to carry out static and dynamic analysis. Various software metrics such as cyclomatic complexity, nesting depth and comment to code are checked. Test cases are generated using equivalence class partitioning, boundary value analysis and cause and effect graphing techniques. System integration testing is carried out wherein functional and performance requirements of the system are monitored.

  18. Verification and Validation in a Rapid Software Development Process

    Science.gov (United States)

    Callahan, John R.; Easterbrook, Steve M.

    1997-01-01

    The high cost of software production is driving development organizations to adopt more automated design and analysis methods such as rapid prototyping, computer-aided software engineering (CASE) tools, and high-level code generators. Even developers of safety-critical software system have adopted many of these new methods while striving to achieve high levels Of quality and reliability. While these new methods may enhance productivity and quality in many cases, we examine some of the risks involved in the use of new methods in safety-critical contexts. We examine a case study involving the use of a CASE tool that automatically generates code from high-level system designs. We show that while high-level testing on the system structure is highly desirable, significant risks exist in the automatically generated code and in re-validating releases of the generated code after subsequent design changes. We identify these risks and suggest process improvements that retain the advantages of rapid, automated development methods within the quality and reliability contexts of safety-critical projects.

  19. PREVALENCE OF SLEEP DISORDERED BREATHING IN PATIENTS WITH NEWLY DIAGNOSED ACROMEGALY

    Directory of Open Access Journals (Sweden)

    U. A. Tsoy

    2014-01-01

    Full Text Available Background: Obstructive sleep disordered breathing or obstructive sleep apnea (OSA is the most common respiratory impairment in acromegaly. OSA is bound up with heightened cardiovascular mortality. Aim: Тo study frequency, features, and structure of sleep disordered breathing in patients with newly diagnosed acromegaly and to elucidate the factors influencing their development. Materials and methods: 38 patients (10 men, 28 women, median age 53 (28-76 years, median body mass index (BMI 29 (19.9-44.3 kg/m² with newly diagnosed acromegaly were recruited into the study. All subjects underwent full polysomnography (Embla N7000, Natus, USA and Remlogica software (USA. Results: Sleep disordered breathing was found in 28 (73.7% patients. OSA was revealed in all cases, in 11 (39.3% subjects it was mixed. In 10 (35.7% patients OSA was mild, in 8 (28.6% moderate, and in 10 (35.7% severe. BMI (р<0.01, disease duration (р=0.003, and insulin-like growth factor-1 (IGF-1 level (р=0.04 were different in patients without OSA and patients with moderate-to-severe OSA. No difference was found in sex (р=0.4, age (р=0.064, and growth hormone level (р=0.6. Frequency of arterial hypertension, diabetes mellitus, and other glucose metabolism impairments was the same in subjects without OSA and with severe-to-moderate OSA. Conclusion: All patients with newly diagnosed acromegaly should undergo polysomnography. BMI, disease duration, and IGF-1 level are significant risk factors for OSA development. Correlation OSA with arterial hypertension and glucose metabolism impairments needs to be further investigated.

  20. Annotated Bibliography on Human Factors in Software Development

    Science.gov (United States)

    1979-06-01

    THE HISTORY IS AN ANALYSIS OF THE IMPACT OF SACH DECISION O THE SOFTWARE DEVELOPED FOR THF SYSTEM A4 0D ON THE LIFE -CYCLE Of THE SOFTWARE. FINALLY, A...BUT NOT ITS SIZE. WE ALLOCATE RESOURCES (COSTS) OVER THE PROJECT’S LIFE CYCLE FROM THE STRUCTURAL FORECASTS. JUDGMENT, TECHNICAL KNOWLEDGE, AND... UIVERSITY , UXBRIDGE, ENGLAND 337, 339 BUREAU OF THE CENSUS, WASHINGTON, DC M99 5URR3UGHS CORP., GOLETA, CA 28 CAINE, FA*PER, X GORDON, INC. 146 CA•RdIDGE

  1. Software

    Energy Technology Data Exchange (ETDEWEB)

    Macedo, R.; Budd, G.; Ross, E.; Wells, P.

    2010-07-15

    The software section of this journal presented new software programs that have been developed to help in the exploration and development of hydrocarbon resources. Software provider IHS Inc. has made additions to its geological and engineering analysis software tool, IHS PETRA, a product used by geoscientists and engineers to visualize, analyze and manage well production, well log, drilling, reservoir, seismic and other related information. IHS PETRA also includes a directional well module and a decline curve analysis module to improve analysis capabilities in unconventional reservoirs. Petris Technology Inc. has developed a software to help manage the large volumes of data. PetrisWinds Enterprise (PWE) helps users find and manage wellbore data, including conventional wireline and MWD core data; analysis core photos and images; waveforms and NMR; and external files documentation. Ottawa-based Ambercore Software Inc. has been collaborating with Nexen on the Petroleum iQ software for steam assisted gravity drainage (SAGD) producers. Petroleum iQ integrates geology and geophysics data with engineering data in 3D and 4D. Calgary-based Envirosoft Corporation has developed a software that reduces the costly and time-consuming effort required to comply with Directive 39 of the Alberta Energy Resources Conservation Board. The product includes an emissions modelling software. Houston-based Seismic Micro-Technology (SMT) has developed the Kingdom software that features the latest in seismic interpretation. Holland-based Joa Oil and Gas and Calgary-based Computer Modelling Group have both supplied the petroleum industry with advanced reservoir simulation software that enables reservoir interpretation. The 2010 software survey included a guide to new software applications designed to facilitate petroleum exploration, drilling and production activities. Oil and gas producers can use the products for a range of functions, including reservoir characterization and accounting. In

  2. Newly graduated nurses' occupational commitment and its associations with professional competence and work-related factors.

    Science.gov (United States)

    Numminen, Olivia; Leino-Kilpi, Helena; Isoaho, Hannu; Meretoja, Riitta

    2016-01-01

    To explore newly graduated nurses' occupational commitment and its associations with their self-assessed professional competence and other work-related factors. As a factor affecting nurse turnover, newly graduated nurses' occupational commitment and its associations with work-related factors needs exploring to retain adequate workforce. Nurses' commitment has mainly been studied as organisational commitment, but newly graduated nurses' occupational commitment and its association with work-related factors needs further studying. This study used descriptive, cross-sectional, correlation design. A convenience sample of 318 newly graduated nurses in Finland participated responding to an electronic questionnaire. Statistical software, NCSS version 9, was used in data analysis. Frequencies, percentages, ranges, means and standard deviations summarised the data. Multivariate Analyses of Variance estimated associations between occupational commitment and work-related variables. IBM SPSS Amos version 22 estimated the model fit of Occupational Commitment Scale and Nurse Competence Scale. Newly graduated nurses' occupational commitment was good, affective commitment reaching the highest mean score. There was a significant difference between the nurse groups in favour of nurses at higher competence levels in all subscales except in limited alternatives occupational commitment. Multivariate analyses revealed significant associations between subscales of commitment and competence, turnover intentions, job satisfaction, earlier professional education and work sector, competence counting only through affective dimension. The association between occupational commitment and low turnover intentions and satisfaction with nursing occupation was strong. Higher general competence indicated higher overall occupational commitment. Managers' recognition of the influence of all dimensions of occupational commitment in newly graduated nurses' professional development is important. Follow

  3. Applicability of newly developed 610MPa class heavy thickness high strength steel to boiler pressure vessel

    Energy Technology Data Exchange (ETDEWEB)

    Katayama, Norihiko; Kaihara, Shoichiro; Ishii, Jun [Ishikawajima-Harima Heavy Industries Corp., Yokohama (Japan); Kajigaya, Ichiro [Ishikawajima-Harima Heavy Industries Corp., Tokyo (Japan); Totsuka, Takehiro; Miyazaki, Takashi [Ishikawajima-Harima Heavy Industries Corp., Aioi (Japan)

    1995-11-01

    Construction of a 350 MW Class PFBC (Pressurized Fluidized Bed Combustion) boiler plant is under planning in Japan. Design temperature and pressure of the vessel are maximum 350 C and 1.69 MPa, respectively. As the plate thickness of the vessel exceeds over 100 mm, high strength steel plate of good weldability and less susceptible to reheat cracking was required and developed. The steel was aimed to satisfy the tensile strength over 610 MPa at 350 C after postweld heat treatment (PWHT), with good notch toughness. The authors investigated the welding performances of the newly developed steel by using 150 mm-thick plate welded by pulsed-MAG and SAW methods. It was confirmed that the newly developed steel and its welds possess sufficient strength and toughness after PWHT, and applicable to the actual pressure vessel.

  4. Fundamental Characteristics of the Newly Developed ATA™ Membrane Dialyzer.

    Science.gov (United States)

    Sunohara, Takashi; Masuda, Toshiaki

    2017-01-01

    Dialysis membranes are often made from synthetic polymers, such as polysulfone. However, membranes made from cellulose triacetate have superior biocompatibility and have been used since the 1980s. On-line hemodiafiltration treatment accompanied by massive fluid replacement is increasingly being used in Europe and Japan, but cellulose triacetate is not suitable for this treatment. Our newly developed asymmetric triacetate membrane, the ATA™ membrane, substantially improved the filtration properties and blood compatibility because of the asymmetric structure and smooth surface of this cellulose acetate membrane. Key Message: The ATA membrane maintains its high permeability even after massive filtration and shows less temporal variation in its permeation performance, lower protein adsorption, and superior biocompatibility compared with conventional membranes. © 2017 S. Karger AG, Basel.

  5. Development of a specific geological mapping software under MAPGIS

    International Nuclear Information System (INIS)

    Zhang Wenkai

    2010-01-01

    The most often used mapping software in geological exploration is MAPGIS system, and related standard is established based on it. The software has more agile functions, except for the following shortages: more parameters to select, difficult to master, different parameters to use for each one, low efficiency. As a result, a specific software is developed for geological mapping by using VC++ on the platform of MAPGIS. According to the standards, toolbars are built for strata, rock, geographic information and materials, etc. By pushing on the buttons, the parameters are selected, and menus of toolbars can be modified to select parameters for each working areas, legends can be sorted automatically. So, the speed can be improved greatly, and the parameters can be identical. The software can complete the transition between Gauss coordinate and longitude-latitude coordinate, drawing points, frames by longitude-latitude, responsible form, plain diagram and profile, etc. The software also improves the way of clipping, topologizing, node catching methods. The application of the software indicates that it can improve the speed of geological mapping greatly, and can improve the standardized level of the final maps. (authors)

  6. The Fox Project: Advanced Development of Systems Software

    National Research Council Canada - National Science Library

    1999-01-01

    The long-term objectives of the Carnegie Mellon Fox Project are to improve the design and construction of systems software and to further the development of advanced programming language technology...

  7. The Fox Project: Advanced Development of Systems Software

    National Research Council Canada - National Science Library

    2000-01-01

    The long-term objectives of the Carnegie Mellon Fox Project are to improve the design and construction of systems software and to further the development of advanced programming language technology...

  8. A roadmap to continuous integration for ATLAS software development

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00132984; The ATLAS collaboration; Elmsheuser, Johannes; Obreshkov, Emil; Krasznahorkay, Attila

    2017-01-01

    The ATLAS software infrastructure facilitates efforts of more than 1000 developers working on the code base of 2200 packages with 4 million C++ and 1.4 million python lines. The ATLAS offline code management system is the powerful, flexible framework for processing new package versions requests, probing code changes in the Nightly Build System, migration to new platforms and compilers, deployment of production releases for worldwide access and supporting physicists with tools and interfaces for efficient software use. It maintains multi-stream, parallel development environment with about 70 multi-platform branches of nightly releases and provides vast opportunities for testing new packages, for verifying patches to existing software and for migrating to new platforms and compilers. The system evolution is currently aimed on the adoption of modern continuous integration (CI) practices focused on building nightly releases early and often, with rigorous unit and integration testing. This paper describes the CI ...

  9. A Roadmap to Continuous Integration for ATLAS Software Development

    CERN Document Server

    Elmsheuser, Johannes; The ATLAS collaboration; Obreshkov, Emil; Undrus, Alexander

    2016-01-01

    The ATLAS software infrastructure facilitates efforts of more than 1000 developers working on the code base of 2200 packages with 4 million C++ and 1.4 million python lines. The ATLAS offline code management system is the powerful, flexible framework for processing new package versions requests, probing code changes in the Nightly Build System, migration to new platforms and compilers, deployment of production releases for worldwide access and supporting physicists with tools and interfaces for efficient software use. It maintains multi-stream, parallel development environment with about 70 multi-platform branches of nightly releases and provides vast opportunities for testing new packages, for verifying patches to existing software and for migrating to new platforms and compilers. The system evolution is currently aimed on the adoption of modern continuous integration (CI) practices focused on building nightly releases early and often, with rigorous unit and integration testing. This presentation describes t...

  10. On the Use of Safety Certification Practices in Autonomous Field Robot Software Development

    DEFF Research Database (Denmark)

    Mogensen, Johann Thor Ingibergsson; Schultz, Ulrik Pagh; Kuhrmann, Marco

    2015-01-01

    reactions or performance in malfunctioning systems, and influence industry regarding software development and project management. However, academia seemingly did not reach the same degree of utilisation of standards. This paper presents the findings from a systematic mapping study in which we study...... the state-of-the-art in developing software for safety-critical software for autonomous field robots. The purpose of the study is to identify practices used for the development of autonomous field robots and how these practices relate to available safety standards. Our findings from reviewing 49 papers show...... on the quest for suitable approaches to develop safety-critical software, awaiting appropriate standards for this support....

  11. Development of the software dead time methodology for the 4πβ-γ software coincidence system analysis program

    International Nuclear Information System (INIS)

    Toledo, Fabio de; Brancaccio, Franco; Dias, Mauro da Silva

    2009-01-01

    The Laboratorio de Metrologia Nuclear - LMN, Nuclear Metrology Laboratory -, at IPEN-CNEN/SP, Sao Paulo, Brazil, developed a new Software Coincidence System (SCS) for 4πβ-γ radioisotope standardization. SCS is composed by the data acquisition hardware, for the coincidence data recording, and the coincidence data analysis program that performs the radioactive activity calculation for the target sample. Due to hardware intrinsic signal sampling characteristics, multiple undesired data recording occurs from a single saturated pulse. Also pulse pileup leads to bad data recording. As the beta counting rates are much greater than the gamma ones, due to the high 4π geometry beta detecting efficiencies, the beta counting significantly increases because of multiple pulse recordings, resulting in a respective increasing in the calculated activity value. In order to minimize such bad recordings effect, a software dead time value was introduced in the coincidence analysis program, under development at LMN, discarding multiple recordings, due to pulse pileup or saturation. This work presents the methodology developed to determine the optimal software dead time data value, for better accuracy results attaining, and discusses the results, pointing to software improvement possibilities. (author)

  12. Modeling and managing risk early in software development

    Science.gov (United States)

    Briand, Lionel C.; Thomas, William M.; Hetmanski, Christopher J.

    1993-01-01

    In order to improve the quality of the software development process, we need to be able to build empirical multivariate models based on data collectable early in the software process. These models need to be both useful for prediction and easy to interpret, so that remedial actions may be taken in order to control and optimize the development process. We present an automated modeling technique which can be used as an alternative to regression techniques. We show how it can be used to facilitate the identification and aid the interpretation of the significant trends which characterize 'high risk' components in several Ada systems. Finally, we evaluate the effectiveness of our technique based on a comparison with logistic regression based models.

  13. General guidelines for biomedical software development [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Luis Bastiao Silva

    2017-03-01

    Full Text Available Most bioinformatics tools available today were not written by professional software developers, but by people that wanted to solve their own problems, using computational solutions and spending the minimum time and effort possible, since these were just the means to an end. Consequently, a vast number of software applications are currently available, hindering the task of identifying the utility and quality of each. At the same time, this situation has hindered regular adoption of these tools in clinical practice. Typically, they are not sufficiently developed to be used by most clinical researchers and practitioners. To address these issues, it is necessary to re-think how biomedical applications are built and adopt new strategies that ensure quality, efficiency, robustness, correctness and reusability of software components. We also need to engage end-users during the development process to ensure that applications fit their needs. In this review, we present a set of guidelines to support biomedical software development, with an explanation of how they can be implemented and what kind of open-source tools can be used for each specific topic.

  14. General guidelines for biomedical software development [version 2; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Luis Bastiao Silva

    2017-07-01

    Full Text Available Most bioinformatics tools available today were not written by professional software developers, but by people that wanted to solve their own problems, using computational solutions and spending the minimum time and effort possible, since these were just the means to an end. Consequently, a vast number of software applications are currently available, hindering the task of identifying the utility and quality of each. At the same time, this situation has hindered regular adoption of these tools in clinical practice. Typically, they are not sufficiently developed to be used by most clinical researchers and practitioners. To address these issues, it is necessary to re-think how biomedical applications are built and adopt new strategies that ensure quality, efficiency, robustness, correctness and reusability of software components. We also need to engage end-users during the development process to ensure that applications fit their needs. In this review, we present a set of guidelines to support biomedical software development, with an explanation of how they can be implemented and what kind of open-source tools can be used for each specific topic.

  15. Communal Resources in Open Source Software Development

    Science.gov (United States)

    Spaeth, Sebastian; Haefliger, Stefan; von Krogh, Georg; Renzl, Birgit

    2008-01-01

    Introduction: Virtual communities play an important role in innovation. The paper focuses on the particular form of collective action in virtual communities underlying as Open Source software development projects. Method: Building on resource mobilization theory and private-collective innovation, we propose a theory of collective action in…

  16. Development of software for computing forming information using a component based approach

    Directory of Open Access Journals (Sweden)

    Kwang Hee Ko

    2009-12-01

    Full Text Available In shipbuilding industry, the manufacturing technology has advanced at an unprecedented pace for the last decade. As a result, many automatic systems for cutting, welding, etc. have been developed and employed in the manufacturing process and accordingly the productivity has been increased drastically. Despite such improvement in the manufacturing technology, however, development of an automatic system for fabricating a curved hull plate remains at the beginning stage since hardware and software for the automation of the curved hull fabrication process should be developed differently depending on the dimensions of plates, forming methods and manufacturing processes of each shipyard. To deal with this problem, it is necessary to create a “plug-in” framework, which can adopt various kinds of hardware and software to construct a full automatic fabrication system. In this paper, a framework for automatic fabrication of curved hull plates is proposed, which consists of four components and related software. In particular the software module for computing fabrication information is developed by using the ooCBD development methodology, which can interface with other hardware and software with minimum effort. Examples of the proposed framework applied to medium and large shipyards are presented.

  17. Development of Usability Criteria for E-Learning Content Development Software

    Science.gov (United States)

    Celik, Serkan

    2012-01-01

    Revolutionary advancements have been observed in e-learning technologies though an amalgamated evaluation methodology for new generation e-learning content development tools is not available. The evaluation of educational software for online use must consider its usability and as well as its pedagogic effectiveness. This study is a first step…

  18. Development of an automated asbestos counting software based on fluorescence microscopy.

    Science.gov (United States)

    Alexandrov, Maxym; Ichida, Etsuko; Nishimura, Tomoki; Aoki, Kousuke; Ishida, Takenori; Hirota, Ryuichi; Ikeda, Takeshi; Kawasaki, Tetsuo; Kuroda, Akio

    2015-01-01

    An emerging alternative to the commonly used analytical methods for asbestos analysis is fluorescence microscopy (FM), which relies on highly specific asbestos-binding probes to distinguish asbestos from interfering non-asbestos fibers. However, all types of microscopic asbestos analysis require laborious examination of large number of fields of view and are prone to subjective errors and large variability between asbestos counts by different analysts and laboratories. A possible solution to these problems is automated counting of asbestos fibers by image analysis software, which would lower the cost and increase the reliability of asbestos testing. This study seeks to develop a fiber recognition and counting software for FM-based asbestos analysis. We discuss the main features of the developed software and the results of its testing. Software testing showed good correlation between automated and manual counts for the samples with medium and high fiber concentrations. At low fiber concentrations, the automated counts were less accurate, leading us to implement correction mode for automated counts. While the full automation of asbestos analysis would require further improvements in accuracy of fiber identification, the developed software could already assist professional asbestos analysts and record detailed fiber dimensions for the use in epidemiological research.

  19. Development of a flight software testing methodology

    Science.gov (United States)

    Mccluskey, E. J.; Andrews, D. M.

    1985-01-01

    The research to develop a testing methodology for flight software is described. An experiment was conducted in using assertions to dynamically test digital flight control software. The experiment showed that 87% of typical errors introduced into the program would be detected by assertions. Detailed analysis of the test data showed that the number of assertions needed to detect those errors could be reduced to a minimal set. The analysis also revealed that the most effective assertions tested program parameters that provided greater indirect (collateral) testing of other parameters. In addition, a prototype watchdog task system was built to evaluate the effectiveness of executing assertions in parallel by using the multitasking features of Ada.

  20. Developing Project Duration Models in Software Engineering

    Institute of Scientific and Technical Information of China (English)

    Pierre Bourque; Serge Oligny; Alain Abran; Bertrand Fournier

    2007-01-01

    Based on the empirical analysis of data contained in the International Software Benchmarking Standards Group(ISBSG) repository, this paper presents software engineering project duration models based on project effort. Duration models are built for the entire dataset and for subsets of projects developed for personal computer, mid-range and mainframeplatforms. Duration models are also constructed for projects requiring fewer than 400 person-hours of effort and for projectsre quiring more than 400 person-hours of effort. The usefulness of adding the maximum number of assigned resources as asecond independent variable to explain duration is also analyzed. The opportunity to build duration models directly fromproject functional size in function points is investigated as well.

  1. Development and application of new quality model for software projects.

    Science.gov (United States)

    Karnavel, K; Dillibabu, R

    2014-01-01

    The IT industry tries to employ a number of models to identify the defects in the construction of software projects. In this paper, we present COQUALMO and its limitations and aim to increase the quality without increasing the cost and time. The computation time, cost, and effort to predict the residual defects are very high; this was overcome by developing an appropriate new quality model named the software testing defect corrective model (STDCM). The STDCM was used to estimate the number of remaining residual defects in the software product; a few assumptions and the detailed steps of the STDCM are highlighted. The application of the STDCM is explored in software projects. The implementation of the model is validated using statistical inference, which shows there is a significant improvement in the quality of the software projects.

  2. A systematic review of applying modern software engineering techniques to developing robotic systems

    Directory of Open Access Journals (Sweden)

    Claudia Pons

    2012-01-01

    Full Text Available Robots have become collaborators in our daily life. While robotic systems become more and more complex, the need to engineer their software development grows as well. The traditional approaches used in developing these software systems are reaching their limits; currently used methodologies and tools fall short of addressing the needs of such complex software development. Separating robotics’ knowledge from short-cycled implementation technologies is essential to foster reuse and maintenance. This paper presents a systematic review (SLR of the current use of modern software engineering techniques for developing robotic software systems and their actual automation level. The survey was aimed at summarizing existing evidence concerning applying such technologies to the field of robotic systems to identify any gaps in current research to suggest areas for further investigation and provide a background for positioning new research activities.

  3. Development of Software for Measurement and Analysis of Solar Radiation

    International Nuclear Information System (INIS)

    Mohamad Idris Taib; Abul Adli Anuar; Noor Ezati Shuib

    2015-01-01

    This software was under development using LabVIEW to be using with StellarNet spectrometers system with USB communication to computer. LabVIEW have capabilities in hardware interfacing, graphical user interfacing and mathematical calculation including array manipulation and processing. This software read data from StellarNet spectrometer in real-time and then processed for analysis. Several measurement of solar radiation and analysis have been done. Solar radiation involved mainly infra-red, visible light and ultra-violet. With solar radiation spectrum data, information of weather and suitability of plant can be gathered and analyzed. Furthermore, optimization of utilization and safety precaution of solar radiation can be planned. Using this software, more research and development in utilization and safety of solar radiation can be explored. (author)

  4. The Dynamics of Agile Practices for Safety-Critical Software Development

    DEFF Research Database (Denmark)

    Nielsen, Peter Axel; Tordrup Heeager, Lise

    2017-01-01

    This short paper reports from a case study of the agile development of safety-critical software. It utilizes a framework of dynamic relationships between agile practices with the purpose of demonstrating the utility of the framework to understand a case in its context, and it shows significant...... dynamics. The study is concluded by pointing at which further research on the framework is required to use the framework in managing the agile development of safety-critical software....

  5. Rapid Software Development for Experiment Control at OPAL

    International Nuclear Information System (INIS)

    Hathaway, P.V.; Lam, Tony; Franceschini, Ferdi; Hauser, Nick; Rayner, Hugh

    2005-01-01

    Full text: ANSTO is undertaking the parallel development of instrument control and graphical experiment interface software for seven neutron beam instruments at OPAL. Each instrument poses several challenges for a common system solution, including custom detector interfaces, a range of motion and beamline optics schema, and a spectrum of online data reduction requirements. To provide a superior system with the least development effort, the computing team have adopted proven, configurable, server-based control software (SICS)1., a highly Integrated Scientific Experimental Environment (GumTree)2. and industry-standard database management systems. The resulting graphical interfaces allow operation in a familiar experiment domain, with monitoring of data and parameters independent of control system specifics. GumTree presents the experimenter with a consistent interface for experiment management, instrument control and data reduction tasks. The facility instrument scientists can easily reconfigure instruments and add ancillaries. The user community can expect a reduced learning curve for performing each experiment. GumTree can be installed anywhere for pre-experiment familiarisation, postprocessing of acquired data sets, and integration with third party analysis tools. Instrument scientists are seeing faster software development iterations and have a solid basis to prepare for the next suite of instruments. 1. SICS from PSI (lns00.psi.ch). 2. GumTree (gumtree.sourceforge.net), new site: http://gumtree.sourceforge.net/wiki/index.php/Main_Page

  6. Application of a methodology for the development and validation of reliable process control software

    International Nuclear Information System (INIS)

    Ramamoorthy, C.V.; Mok, Y.R.; Bastani, F.B.; Chin, G.

    1980-01-01

    The necessity of a good methodology for the development of reliable software, especially with respect to the final software validation and testing activities, is discussed. A formal specification development and validation methodology is proposed. This methodology has been applied to the development and validation of a pilot software, incorporating typical features of critical software for nuclear power plants safety protection. The main features of the approach include the use of a formal specification language and the independent development of two sets of specifications. 1 ref

  7. Hybrid Software and System Development in Practice: Waterfall, Scrum, and Beyond

    OpenAIRE

    Kuhrmann, Marco; Diebold, Philipp; Münch, Jürgen; Tell, Paolo; Garousi, Vahid; Felderer, Michael; Trektere, Kitija; McCaffery, Fergal; Linssen, Oliver; Hanser, Eckhart; Prause, Christian

    2017-01-01

    Software and system development faces numerous challenges of rapidly changing markets. To address such challenges, companies and projects design and adopt specific development approaches by combining well-structured comprehensive methods and flexible agile practices. Yet, the number of methods and practices is large, and available studies argue that the actual process composition is carried out in a fairly ad-hoc manner. The present paper reports on a survey on hybrid software development app...

  8. Rules of thumb to increase the software quality through testing

    Science.gov (United States)

    Buttu, M.; Bartolini, M.; Migoni, C.; Orlati, A.; Poppi, S.; Righini, S.

    2016-07-01

    The software maintenance typically requires 40-80% of the overall project costs, and this considerable variability mostly depends on the software internal quality: the more the software is designed and implemented to constantly welcome new changes, the lower will be the maintenance costs. The internal quality is typically enforced through testing, which in turn also affects the development and maintenance costs. This is the reason why testing methodologies have become a major concern for any company that builds - or is involved in building - software. Although there is no testing approach that suits all contexts, we infer some general guidelines learned during the Development of the Italian Single-dish COntrol System (DISCOS), which is a project aimed at producing the control software for the three INAF radio telescopes (the Medicina and Noto dishes, and the newly-built SRT). These guidelines concern both the development and the maintenance phases, and their ultimate goal is to maximize the DISCOS software quality through a Behavior-Driven Development (BDD) workflow beside a continuous delivery pipeline. We consider different topics and patterns; they involve the proper apportion of the tests (from end-to-end to low-level tests), the choice between hardware simulators and mockers, why and how to apply TDD and the dependency injection to increase the test coverage, the emerging technologies available for test isolation, bug fixing, how to protect the system from the external resources changes (firmware updating, hardware substitution, etc.) and, eventually, how to accomplish BDD starting from functional tests and going through integration and unit tests. We discuss pros and cons of each solution and point out the motivations of our choices either as a general rule or narrowed in the context of the DISCOS project.

  9. Identifying Coordination Problems in Software Development : Finding Mismatches between Software and Project Team Structures

    NARCIS (Netherlands)

    Amrit, Chintan Amrit; van Hillegersberg, Jos; Kumar, Kuldeep

    2012-01-01

    Today’s dynamic and iterative development environment brings significant challenges for software project management. In distributed project settings, “management by walking around” is no longer an option and project managers may miss out on key project insights. The TESNA (TEchnical Social Network

  10. [The development and evaluation of software to verify diagnostic accuracy].

    Science.gov (United States)

    Jensen, Rodrigo; de Moraes Lopes, Maria Helena Baena; Silveira, Paulo Sérgio Panse; Ortega, Neli Regina Siqueira

    2012-02-01

    This article describes the development and evaluation of software that verifies the accuracy of diagnoses made by nursing students. The software was based on a model that uses fuzzy logic concepts, including PERL, the MySQL database for Internet accessibility, and the NANDA-I 2007-2008 classification system. The software was evaluated in terms of its technical quality and usability through specific instruments. The activity proposed in the software involves four stages in which students establish the relationship values between nursing diagnoses, defining characteristics/risk factors and clinical cases. The relationship values determined by students are compared to those of specialists, generating performance scores for the students. In the evaluation, the software demonstrated satisfactory outcomes regarding the technical quality and, according to the students, helped in their learning and may become an educational tool to teach the process of nursing diagnosis.

  11. Clinical software development for the Web: lessons learned from the BOADICEA project

    OpenAIRE

    Cunningham, Alex P; Antoniou, Antonis C; Easton, Douglas F

    2012-01-01

    Abstract Background In the past 20 years, society has witnessed the following landmark scientific advances: (i) the sequencing of the human genome, (ii) the distribution of software by the open source movement, and (iii) the invention of the World Wide Web. Together, these advances have provided a new impetus for clinical software development: developers now translate the products of human genomic research into clinical software tools; they use open-source programs to build them; and they use...

  12. Self-service for software development projects and HPC activities

    International Nuclear Information System (INIS)

    Husejko, M; Høimyr, N; Gonzalez, A; Koloventzos, G; Asbury, D; Trzcinska, A; Agtzidis, I; Botrel, G; Otto, J

    2014-01-01

    This contribution describes how CERN has implemented several essential tools for agile software development processes, ranging from version control (Git) to issue tracking (Jira) and documentation (Wikis). Running such services in a large organisation like CERN requires many administrative actions both by users and service providers, such as creating software projects, managing access rights, users and groups, and performing tool-specific customisation. Dealing with these requests manually would be a time-consuming task. Another area of our CERN computing services that has required dedicated manual support has been clusters for specific user communities with special needs. Our aim is to move all our services to a layered approach, with server infrastructure running on the internal cloud computing infrastructure at CERN. This contribution illustrates how we plan to optimise the management of our of services by means of an end-user facing platform acting as a portal into all the related services for software projects, inspired by popular portals for open-source developments such as Sourceforge, GitHub and others. Furthermore, the contribution will discuss recent activities with tests and evaluations of High Performance Computing (HPC) applications on different hardware and software stacks, and plans to offer a dynamically scalable HPC service at CERN, based on affordable hardware.

  13. Exploratory research for the development of a computer aided software design environment with the software technology program

    Science.gov (United States)

    Hardwick, Charles

    1991-01-01

    Field studies were conducted by MCC to determine areas of research of mutual interest to MCC and JSC. NASA personnel from the Information Systems Directorate and research faculty from UHCL/RICIS visited MCC in Austin, Texas to examine tools and applications under development in the MCC Software Technology Program. MCC personnel presented workshops in hypermedia, design knowledge capture, and design recovery on site at JSC for ISD personnel. The following programs were installed on workstations in the Software Technology Lab, NASA/JSC: (1) GERM (Graphic Entity Relations Modeler); (2) gIBIS (Graphic Issues Based Information System); and (3) DESIRE (Design Recovery tool). These applications were made available to NASA for inspection and evaluation. Programs developed in the MCC Software Technology Program run on the SUN workstation. The programs do not require special configuration, but they will require larger than usual amounts of disk space and RAM to operate properly.

  14. A Framework for Teaching Software Development Methods

    Science.gov (United States)

    Dubinsky, Yael; Hazzan, Orit

    2005-01-01

    This article presents a study that aims at constructing a teaching framework for software development methods in higher education. The research field is a capstone project-based course, offered by the Technion's Department of Computer Science, in which Extreme Programming is introduced. The research paradigm is an Action Research that involves…

  15. Progress on standardization and automation in software development on W7X

    International Nuclear Information System (INIS)

    Kühner, Georg; Bluhm, Torsten; Heimann, Peter; Hennig, Christine; Kroiss, Hugo; Krom, Jon; Laqua, Heike; Lewerentz, Marc; Maier, Josef; Schacht, Jörg; Spring, Anett; Werner, Andreas; Zilker, Manfred

    2012-01-01

    Highlights: ► For W7X software development the use of ISO/IEC15504-5 is further extended. ► The standard provides a basis to manage software multi-projects for a large system project. ► Adoption of a scrum-like management allows for quick reaction on priority changes. ► A high degree of software build automation allows for quick responses to user requests. ► It provides additional resources to concentrate work on product quality (ISO/IEC 25000). - Abstract: For a complex experiment like W7X being subject to changes all along its projected lifetime the advantages of a formalized software development method have already been stated. Quality standards like ISO/IEC-12207 provide a guideline for structuring of development work and improving process and product quality. A considerable number of tools has emerged supporting and automating parts of development work. On W7X progress has been made during the last years in exploiting the benefit of automation and management during software development: –Continuous build, integration and automated test of software artefacts. ∘Syntax checks and code quality metrics. ∘Documentation generation. ∘Feedback for developers by temporal statistics. –Versioned repository for build products (libraries, executables). –Separate snapshot and release repositories and automatic deployment. –Semi-automatic provisioning of applications. –Feedback from testers and feature requests by ticket system. This toolset is working efficiently and allows the team to concentrate on development. The activity there is presently focused on increasing the quality of the existing software to become a dependable product. Testing of single functions and qualities must be simplified. So a restructuring is underway which relies more on small, individually testable components with standardized interfaces providing the capability to construct arbitrary function aggregates for dedicated tests of quality attributes as availability, reliability

  16. Progress on standardization and automation in software development on W7X

    Energy Technology Data Exchange (ETDEWEB)

    Kuehner, Georg, E-mail: kuehner@ipp.mpg.de [Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, D-17491 Greifswald (Germany); Bluhm, Torsten [Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, D-17491 Greifswald (Germany); Heimann, Peter [Max-Planck-Institut fuer Plasmaphysik, Boltzmannstrasse 2, D-85748 Garching (Germany); Hennig, Christine [Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, D-17491 Greifswald (Germany); Kroiss, Hugo [Max-Planck-Institut fuer Plasmaphysik, Boltzmannstrasse 2, D-85748 Garching (Germany); Krom, Jon; Laqua, Heike; Lewerentz, Marc [Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, D-17491 Greifswald (Germany); Maier, Josef [Max-Planck-Institut fuer Plasmaphysik, Boltzmannstrasse 2, D-85748 Garching (Germany); Schacht, Joerg; Spring, Anett; Werner, Andreas [Max-Planck-Institut fuer Plasmaphysik, Wendelsteinstrasse 1, D-17491 Greifswald (Germany); Zilker, Manfred [Max-Planck-Institut fuer Plasmaphysik, Boltzmannstrasse 2, D-85748 Garching (Germany)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer For W7X software development the use of ISO/IEC15504-5 is further extended. Black-Right-Pointing-Pointer The standard provides a basis to manage software multi-projects for a large system project. Black-Right-Pointing-Pointer Adoption of a scrum-like management allows for quick reaction on priority changes. Black-Right-Pointing-Pointer A high degree of software build automation allows for quick responses to user requests. Black-Right-Pointing-Pointer It provides additional resources to concentrate work on product quality (ISO/IEC 25000). - Abstract: For a complex experiment like W7X being subject to changes all along its projected lifetime the advantages of a formalized software development method have already been stated. Quality standards like ISO/IEC-12207 provide a guideline for structuring of development work and improving process and product quality. A considerable number of tools has emerged supporting and automating parts of development work. On W7X progress has been made during the last years in exploiting the benefit of automation and management during software development: -Continuous build, integration and automated test of software artefacts. Ring-Operator Syntax checks and code quality metrics. Ring-Operator Documentation generation. Ring-Operator Feedback for developers by temporal statistics. -Versioned repository for build products (libraries, executables). -Separate snapshot and release repositories and automatic deployment. -Semi-automatic provisioning of applications. -Feedback from testers and feature requests by ticket system. This toolset is working efficiently and allows the team to concentrate on development. The activity there is presently focused on increasing the quality of the existing software to become a dependable product. Testing of single functions and qualities must be simplified. So a restructuring is underway which relies more on small, individually testable components with standardized

  17. The Five 'R's' for Developing Trusted Software Frameworks to increase confidence in, and maximise reuse of, Open Source Software.

    Science.gov (United States)

    Fraser, Ryan; Gross, Lutz; Wyborn, Lesley; Evans, Ben; Klump, Jens

    2015-04-01

    Recent investments in HPC, cloud and Petascale data stores, have dramatically increased the scale and resolution that earth science challenges can now be tackled. These new infrastructures are highly parallelised and to fully utilise them and access the large volumes of earth science data now available, a new approach to software stack engineering needs to be developed. The size, complexity and cost of the new infrastructures mean any software deployed has to be reliable, trusted and reusable. Increasingly software is available via open source repositories, but these usually only enable code to be discovered and downloaded. As a user it is hard for a scientist to judge the suitability and quality of individual codes: rarely is there information on how and where codes can be run, what the critical dependencies are, and in particular, on the version requirements and licensing of the underlying software stack. A trusted software framework is proposed to enable reliable software to be discovered, accessed and then deployed on multiple hardware environments. More specifically, this framework will enable those who generate the software, and those who fund the development of software, to gain credit for the effort, IP, time and dollars spent, and facilitate quantification of the impact of individual codes. For scientific users, the framework delivers reviewed and benchmarked scientific software with mechanisms to reproduce results. The trusted framework will have five separate, but connected components: Register, Review, Reference, Run, and Repeat. 1) The Register component will facilitate discovery of relevant software from multiple open source code repositories. The registration process of the code should include information about licensing, hardware environments it can be run on, define appropriate validation (testing) procedures and list the critical dependencies. 2) The Review component is targeting on the verification of the software typically against a set of

  18. Adopting of Agile methods in Software Development Organizations: Systematic Mapping

    Directory of Open Access Journals (Sweden)

    Samia Abdalhamid

    2017-11-01

    Full Text Available Adoption of agile methods in the software development organization is considered as a powerful solution to deal with the quickly changing and regularly developing business environment and fully-educated customers with constantly rising expectation, such as shorter time periods and an extraordinary level of response and service. This study investigates the adoption of agile approaches in software development organizations by using systematic mapping. Six research questions are identified, and to answer these questions a number of research papers have been reviewed in electronic databases. Finally, 25 research papers are examined and answers to all research questions are provided.

  19. The cognitive dynamics of computer science cost-effective large scale software development

    CERN Document Server

    De Gyurky, Szabolcs Michael; John Wiley & Sons

    2006-01-01

    This book has three major objectives: To propose an ontology for computer software; To provide a methodology for development of large software systems to cost and schedule that is based on the ontology; To offer an alternative vision regarding the development of truly autonomous systems.

  20. Why Closely Coupled Work Matters in Global Software Development

    DEFF Research Database (Denmark)

    Jensen, Rasmus Eskild

    2014-01-01

    We report on an ethnographic study of an offshore global software development project between Danish and Philippine developers in a Danish company called GlobalSoft. We investigate why the IT- developers chose to engage in more closely coupled work as the project progressed and argue that closely...

  1. Development Of Data Acquisition Software For Centralized Radiation Monitoring System

    International Nuclear Information System (INIS)

    Nolida Yussup; Maslina Mohd Ibrahim; Mohd Fauzi Haris; Syirrazie Che Soh; Harzawardi Hasim; Azraf Azman; Mohd Ashhar Khalid

    2014-01-01

    Nowadays, with the growth of technology, many devices and equipment's can be connected to the network and internet to enable online data acquisition. Centralized radiation monitoring system utilizes a Local Area Network (LAN) as a communication media for data acquisition of the area radiation levels from radiation detectors in Malaysian Nuclear Agency (Nuclear Malaysia). The development of the system involves device configuration, wiring, network and hardware installation, software and web development. This paper describes the software development on the system server that is responsible to acquire and record the area radiation readings from the detectors. Then the recorded readings are called in a web programming to be displayed on a web site. The readings with the time stamp are stored in the system database for query. Besides acquiring the area radiation levels in Nuclear Malaysia centrally, additional features such as data conversion from mR to μSv and line chart display are developed in the software for effective radiation level trend observation and studies. (author)

  2. Software development tools for the CDF MX scanner

    Energy Technology Data Exchange (ETDEWEB)

    Stuermer, W.; Turner, K.; Littleton-Sestini, S.

    1991-11-01

    This paper discuses the design of the high level assembler and diagnostic control program developed for the MX, a high speed, custom designed computer used in the CDF data acquisition system at Fermilab. These programs provide a friendly productive environment for the development of software on the MX. Details of their implementation and special features, and some of the lessons learned during their development are included.

  3. Software development tools for the CDF MX scanner

    International Nuclear Information System (INIS)

    Stuermer, W.; Turner, K.; Littleton-Sestini, S.

    1991-11-01

    This paper discuses the design of the high level assembler and diagnostic control program developed for the MX, a high speed, custom designed computer used in the CDF data acquisition system at Fermilab. These programs provide a friendly productive environment for the development of software on the MX. Details of their implementation and special features, and some of the lessons learned during their development are included

  4. Application of software quality assurance to a specific scientific code development task

    International Nuclear Information System (INIS)

    Dronkers, J.J.

    1986-03-01

    This paper describes an application of software quality assurance to a specific scientific code development program. The software quality assurance program consists of three major components: administrative control, configuration management, and user documentation. The program attempts to be consistent with existing local traditions of scientific code development while at the same time providing a controlled process of development

  5. Software Unit Testing during the Development of Digital Reactor Protection System of HTR-PM

    International Nuclear Information System (INIS)

    Guo Chao; Xiong Huasheng; Li Duo; Zhou Shuqiao; Li Jianghai

    2014-01-01

    Reactor Protection System (RPS) of High Temperature Gas-Cooled Reactor - Pebble bed Module (HTR-PM) is the first digital RPS designed and to be operated in the Nuclear Power Plant (NPP) of China, and its development process has receives a lot of concerns around the world. As a 1E-level safety system, the RPS has to be designed and developed following a series of nuclear laws and technical disciplines including software verification and validation (software V&V). Software V&V process demonstrates whether all stages during the software development are performed correctly, completely, accurately, and consistently, and the results of each stage are testable. Software testing is one of the most significant and time-consuming effort during software V&V. In this paper, we give a comprehensive introduction to the software unit testing during the development of RPS in HTR-PM. We first introduce the objective of the testing for our project in the aspects of static testing, black-box testing, and white-box testing. Then the testing techniques, including static testing and dynamic testing, are explained, and the testing strategy we employed is also introduced. We then introduce the principles of three kinds of coverage criteria we used including statement coverage, branch coverage, and the modified condition/decision coverage. As a 1E-level safety software, testing coverage needs to be up to 100% mandatorily. Then we talk the details of safety software testing during software development in HTR-PM, including the organization, methods and tools, testing stages, and testing report. The test result and experiences are shared and finally we draw a conclusion for the unit testing process. The introduction of this paper can contribute to improve the process of unit testing and software development for other digital instrumentation and control systems in NPPs. (author)

  6. Software Development Plan for DESCARTES and CIDER

    International Nuclear Information System (INIS)

    Eslinger, P.W.

    1992-01-01

    This Software Development Plan (SDP) outlines all software activities required to obtain functional environmental accumulation and individual dose codes for the Hanford Environmental Dose Reconstruction (HEDR) project. The modeling activities addressed use the output of the air transport-code HATCHET to compute radionuclide concentrations in environmental pathways, and continue on through calculations of dose for individuals. The Hanford Environmental Dose Reconstruction (HEDR) Project has a deliverable in the June 1993 time frame to be able to start computing doses to individuals from nuclear-related activities on the Hanford Site during and following World War II. The CIDER code will compute doses and their uncertainties for individuals living in the contaminated environment computed by DESCARTES. The projected size of the code is 3000 lines

  7. Software Configuration Management For Multiple Releases: Influence On Development Effort

    Directory of Open Access Journals (Sweden)

    Sławomir P. Maludziński

    2007-01-01

    Full Text Available Software Configuration Management (SCM evolves together with the discipline of softwareengineering. Teams working on software products become larger and are geographically distributedat multiple sites. Collaboration between such groups requires well evaluated SCMplans and strategies to easy cooperation and decrease software development cost by reducingtime spent on SCM activities – branching and merging, that is effort utilized on creation ofrevisions (’serial’ versions and variants (’parallel’ versions. This paper suggests that SCMpractices should be combined with modular design and code refactoring to reduce cost relatedto maintenance of the same code line. Teams which produce several variants of thesame code line at the same time should use approaches like components, modularization, orplug-ins over code alternations maintained on version branches. Findings described in thispaper were taken by teams in charge of development of radio communication systems inMotorola GEMS divisions. Each team collaborating on similar projects used different SCMstrategies to develop parts of this system.

  8. Integrating HCI Specialists into Open Source Software Development Projects

    Science.gov (United States)

    Hedberg, Henrik; Iivari, Netta

    Typical open source software (OSS) development projects are organized around technically talented developers, whose communication is based on technical aspects and source code. Decision-making power is gained through proven competence and activity in the project, and non-technical end-user opinions are too many times neglected. In addition, also human-computer interaction (HCI) specialists have encountered difficulties in trying to participate in OSS projects, because there seems to be no clear authority and responsibility for them. In this paper, based on HCI and OSS literature, we introduce an extended OSS development project organization model that adds a new level of communication and roles for attending human aspects of software. The proposed model makes the existence of HCI specialists visible in the projects, and promotes interaction between developers and the HCI specialists in the course of a project.

  9. Distributed Software Development with One Hand Tied Behind the Back

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Münch, Jürgen

    2016-01-01

    Software development consists to a large extent of human-based processes with continuously increasing demands regarding interdisciplinary team work. Understanding the dynamics of software teams can be seen as highly important to successful project execution. Hence, for future project managers......, knowledge about non-technical processes in teams is significant. In this paper, we present a course unit that provides an environment in which students can learn and experience the role of different communication patterns in distributed agile software development. In particular, students gain awareness...... in virtual teams. We provide a detailed design of the course unit to allow for implementation in further courses. Furthermore, we provide experiences obtained from implementing this course unit with 16 graduate students. We observed students struggling with technical aspects and team coordination in general...

  10. Interplay between usability evaluation and software development (I-USED 2009)

    DEFF Research Database (Denmark)

    Abrahão, S.; Hornbæk, Kasper Anders Søren; Law, E.

    2009-01-01

    This workshop is aimed at bringing together researchers and practitioners from the Human-Computer Interaction (HCI) and Software Engineering (SE) fields to determine the state-of-the-art in the interplay between usability evaluation and software development and to generate ideas for new...... and improved relations between these activities. The aim is to base the determination of the current state on empirical studies. Presentations of new ideas on how to improve the interplay between HCI & SE to the design of usable software systems should also be based on empirical studies....

  11. Development of Cell Analysis Software for Cultivated Corneal Endothelial Cells.

    Science.gov (United States)

    Okumura, Naoki; Ishida, Naoya; Kakutani, Kazuya; Hongo, Akane; Hiwa, Satoru; Hiroyasu, Tomoyuki; Koizumi, Noriko

    2017-11-01

    To develop analysis software for cultured human corneal endothelial cells (HCECs). Software was designed to recognize cell borders and to provide parameters such as cell density, coefficient of variation, and polygonality of cultured HCECs based on phase contrast images. Cultured HCECs with high or low cell density were incubated with Ca-free and Mg-free phosphate-buffered saline for 10 minutes to reveal the cell borders and were then analyzed with software (n = 50). Phase contrast images showed that cell borders were not distinctly outlined, but these borders became more distinctly outlined after phosphate-buffered saline treatment and were recognized by cell analysis software. The cell density value provided by software was similar to that obtained using manual cell counting by an experienced researcher. Morphometric parameters, such as the coefficient of variation and polygonality, were also produced by software, and these values were significantly correlated with cell density (Pearson correlation coefficients -0.62 and 0.63, respectively). The software described here provides morphometric information from phase contrast images, and it enables subjective and noninvasive quality assessment for tissue engineering therapy of the corneal endothelium.

  12. Pathways to lean software development: An analysis of effective methods of change

    Science.gov (United States)

    Hanson, Richard D.

    This qualitative Delphi study explored the challenges that exist in delivering software on time, within budget, and with the original scope identified. The literature review identified many attempts over the past several decades to reform the methods used to develop software. These attempts found that the classical waterfall method, which is firmly entrenched in American business today was to blame for this difficulty (Chatterjee, 2010). Each of these proponents of new methods sought to remove waste, lighten out the process, and implement lean principles in software development. Through this study, the experts evaluated the barriers to effective development principles and defined leadership qualities necessary to overcome these barriers. The barriers identified were issues of resistance to change, risk and reward issues, and management buy-in. Thirty experts in software development from several Fortune 500 companies across the United States explored each of these issues in detail. The conclusion reached by these experts was that visionary leadership is necessary to overcome these challenges.

  13. Improving Video Game Development: Facilitating Heterogeneous Team Collaboration through Flexible Software Processes

    Science.gov (United States)

    Musil, Juergen; Schweda, Angelika; Winkler, Dietmar; Biffl, Stefan

    Based on our observations of Austrian video game software development (VGSD) practices we identified a lack of systematic processes/method support and inefficient collaboration between various involved disciplines, i.e. engineers and artists. VGSD includes heterogeneous disciplines, e.g. creative arts, game/content design, and software. Nevertheless, improving team collaboration and process support is an ongoing challenge to enable a comprehensive view on game development projects. Lessons learned from software engineering practices can help game developers to increase game development processes within a heterogeneous environment. Based on a state of the practice survey in the Austrian games industry, this paper presents (a) first results with focus on process/method support and (b) suggests a candidate flexible process approach based on Scrum to improve VGSD and team collaboration. Results showed (a) a trend to highly flexible software processes involving various disciplines and (b) identified the suggested flexible process approach as feasible and useful for project application.

  14. Developing an Open Source Option for NASA Software

    Science.gov (United States)

    Moran, Patrick J.; Parks, John W. (Technical Monitor)

    2003-01-01

    We present arguments in favor of developing an Open Source option for NASA software; in particular we discuss how Open Source is compatible with NASA's mission. We compare and contrast several of the leading Open Source licenses, and propose one - the Mozilla license - for use by NASA. We also address some of the related issues for NASA with respect to Open Source. In particular, we discuss some of the elements in the External Release of NASA Software document (NPG 2210.1A) that will likely have to be changed in order to make Open Source a reality withm the agency.

  15. PHL10/460: Cancerfacts.com - Vertical Portal with Newly Developed Health Profiler

    OpenAIRE

    Lenz, C; Brucksch, M

    1999-01-01

    Introduction Unlike general health portals such as WebMD and Drkoop.com that cover everything from the flu to heart disease, Silicon Valley-based cancerfacts.com is a so-called vertical portal. It covers only one small vertical niche of health care: cancer, and in particular, prostate cancer. As a value-added proprietary technology, the company offers its newly developed profile engine to health information retrievers. Methods Users are enabled to insert their specific medical information - r...

  16. Efficient Development and Verification of Safe Railway Control Software

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth; Peleska, Jan

    2013-01-01

    the monitoring process; hydraulic absorbers as dampers to dissipate the energy of oscillations in railway electric equipment; development of train fare calculation and adjustment systems using VDM++; efficient development and verification of safe railway control software; and evolution of the connectivity...

  17. LabVIEW control software for scanning micro-beam X-ray fluorescence spectrometer.

    Science.gov (United States)

    Wrobel, Pawel; Czyzycki, Mateusz; Furman, Leszek; Kolasinski, Krzysztof; Lankosz, Marek; Mrenca, Alina; Samek, Lucyna; Wegrzynek, Dariusz

    2012-05-15

    Confocal micro-beam X-ray fluorescence microscope was constructed. The system was assembled from commercially available components - a low power X-ray tube source, polycapillary X-ray optics and silicon drift detector - controlled by an in-house developed LabVIEW software. A video camera coupled to optical microscope was utilized to display the area excited by X-ray beam. The camera image calibration and scan area definition software were also based entirely on LabVIEW code. Presently, the main area of application of the newly constructed spectrometer is 2-dimensional mapping of element distribution in environmental, biological and geological samples with micrometer spatial resolution. The hardware and the developed software can already handle volumetric 3-D confocal scans. In this work, a front panel graphical user interface as well as communication protocols between hardware components were described. Two applications of the spectrometer, to homogeneity testing of titanium layers and to imaging of various types of grains in air particulate matter collected on membrane filters, were presented. Copyright © 2012 Elsevier B.V. All rights reserved.

  18. INVESTIGATION THE FITTING ACCURACY OF CAST AND SLM CO-CR DENTAL BRIDGES USING CAD SOFTWARE

    Directory of Open Access Journals (Sweden)

    Tsanka Dikova

    2017-09-01

    Full Text Available The aim of the present paper is to investigate the fitting accuracy of Co-Cr dental bridges, manufactured by three technologies, with the newly developed method using CAD software. The four-part dental bridges of Co-Cr alloys were produced by conventional casting of wax models, casting with 3D printed patterns and selective laser melting. The marginal and internal fit of dental bridges was studied out by two methods – silicone replica test and CAD software. As the silicone replica test characterizes with comparatively low accuracy, a new methodology for investigating the fitting accuracy of dental bridges was developed based on the SolidWorks CAD software. The newly developed method allows the study of the marginal and internal adaptation in unlimited directions and high accuracy. Investigation the marginal fit and internal adaptation of Co-Cr four-part dental bridges by the two methods show that the technological process strongly influences the fitting accuracy of dental restorations. The fitting accuracy of the bridges, cast with 3D printed patterns, is the highest, followed by the SLM and conventionally cast bridges. The marginal fit of the three groups of bridges is in the clinically acceptable range. The internal gap values vary in different regions – it is highest on the occlusal surfaces, followed by that in the marginal and axial areas. The higher fitting accuracy of the bridges, manufactured by casting with 3D printed patterns and SLM, compared to the conventionally cast bridges is a good precondition for their successful implementation in the dental offices and laboratories.

  19. An integrated computer design environment for the development of micro-computer critical software

    International Nuclear Information System (INIS)

    De Agostino, E.; Massari, V.

    1986-01-01

    The paper deals with the development of micro-computer software for Nuclear Safety System. More specifically, it describes an experimental work in the field of software development methodologies to be used for the implementation of micro-computer based safety systems. An investigation of technological improvements that are provided by state-of-the-art integrated packages for micro-based systems development has been carried out. The work has aimed to assess a suitable automated tools environment for the whole software life-cycle. The main safety functions, as DNBR, KW/FT, of a nuclear power reactor have been implemented in a host-target approach. A prototype test-bed microsystem has been implemented to run the safety functions in order to derive a concrete evaluation on the feasibility of critical software according to new technological trends of ''Software Factories''. (author)

  20. PTaaS: Platform for Providing Software Developing Applications and Tools as a Service

    DEFF Research Database (Denmark)

    Chauhan, Muhammad Aufeef; Babar, Muhammad Ali

    2014-01-01

    technological support for it that is not limited to one specific tools and a particular phase of software development life cycle. In this thesis, we have explored the possibility of offering software development applications and tools as services that can be acquired on demand according to the software...... with process. Information gained from the review of literature on GSD tools and processes is used to extract functional requirements for the middleware platform for provisioning of software development applications and tools as services. Finding from the review of literature on architecture solutions for cloud......Cloud computing has become an established paradigm for enabling organizations to build scalable software systems and to meet challenges of rapid demand of computing and storage resources. There has been a significant success in building cloud-enabled applications for many disciplines ranging from...