Newly Developed Ceramic Membranes for Dehydration and Separation of Organic Mixtures by Pervaporation

NARCIS (Netherlands)

Gemert, van R.W.; Cuperus, F.P.

1995-01-01

Polymeric pervaporation membranes sometimes show great variety in performance when they are alternately used for different solvent mixtures. In addition, membrane stability in time is a problem in case of some solvents. Therefore, newly developed ceramic silica membranes with a 'dense' top layer

The Development Needs of Newly Appointed Senior School Leaders in the Western Cape South Africa: A Case Study

Directory of Open Access Journals (Sweden)

Nelius Jansen van Vuuren

2017-12-01

Full Text Available The essential role that senior school leaders play in school leadership teams to ensure effective strategic leadership in schools has been the subject of intense discussion for many years. Crucial to this debate is the establishment of professional learning and leadership approaches for newly appointed senior school leaders. Recommendations for policy and practice highlight the importance of appropriate, multifaceted, developmental support initiatives for newly appointed school leaders. In many countries, including South Africa, a teaching qualification and, in most cases, extensive teaching experience is the only requirement for being appointed as a senior school leader in a school. This tends to suggest that no further professional development is required for newly appointed school leaders, the problem addressed in this paper. This paper reports on the main findings of the perceived development needs of newly appointed senior school leaders in the Western Cape, South Africa, and suggests that school leaders occupy a unique and specialist role in education, which requires relevant and specific preparation to support effective leadership. The respondents of this study report a lack of contextualised training and support before and after their appointment in their new roles creating unique development needs. This paper, therefore, employs a mixed-method approach to gather data to understand the perceived needs of twenty newly appointed senior school leaders in the Western Cape, South Africa.

A scalable fully implicit framework for reservoir simulation on parallel computers

KAUST Repository

Yang, Haijian

2017-11-10

The modeling of multiphase fluid flow in porous medium is of interest in the field of reservoir simulation. The promising numerical methods in the literature are mostly based on the explicit or semi-implicit approach, which both have certain stability restrictions on the time step size. In this work, we introduce and study a scalable fully implicit solver for the simulation of two-phase flow in a porous medium with capillarity, gravity and compressibility, which is free from the limitations of the conventional methods. In the fully implicit framework, a mixed finite element method is applied to discretize the model equations for the spatial terms, and the implicit Backward Euler scheme with adaptive time stepping is used for the temporal integration. The resultant nonlinear system arising at each time step is solved in a monolithic way by using a Newton–Krylov type method. The corresponding linear system from the Newton iteration is large sparse, nonsymmetric and ill-conditioned, consequently posing a significant challenge to the fully implicit solver. To address this issue, the family of additive Schwarz preconditioners is taken into account to accelerate the convergence of the linear system, and thereby improves the robustness of the outer Newton method. Several test cases in one, two and three dimensions are used to validate the correctness of the scheme and examine the performance of the newly developed algorithm on parallel computers.

A scalable fully implicit framework for reservoir simulation on parallel computers

KAUST Repository

Yang, Haijian; Sun, Shuyu; Li, Yiteng; Yang, Chao

2017-01-01

The modeling of multiphase fluid flow in porous medium is of interest in the field of reservoir simulation. The promising numerical methods in the literature are mostly based on the explicit or semi-implicit approach, which both have certain stability restrictions on the time step size. In this work, we introduce and study a scalable fully implicit solver for the simulation of two-phase flow in a porous medium with capillarity, gravity and compressibility, which is free from the limitations of the conventional methods. In the fully implicit framework, a mixed finite element method is applied to discretize the model equations for the spatial terms, and the implicit Backward Euler scheme with adaptive time stepping is used for the temporal integration. The resultant nonlinear system arising at each time step is solved in a monolithic way by using a Newton–Krylov type method. The corresponding linear system from the Newton iteration is large sparse, nonsymmetric and ill-conditioned, consequently posing a significant challenge to the fully implicit solver. To address this issue, the family of additive Schwarz preconditioners is taken into account to accelerate the convergence of the linear system, and thereby improves the robustness of the outer Newton method. Several test cases in one, two and three dimensions are used to validate the correctness of the scheme and examine the performance of the newly developed algorithm on parallel computers.

Development of a Fully-Automated Monte Carlo Burnup Code Monteburns

International Nuclear Information System (INIS)

Poston, D.I.; Trellue, H.R.

1999-01-01

Several computer codes have been developed to perform nuclear burnup calculations over the past few decades. In addition, because of advances in computer technology, it recently has become more desirable to use Monte Carlo techniques for such problems. Monte Carlo techniques generally offer two distinct advantages over discrete ordinate methods: (1) the use of continuous energy cross sections and (2) the ability to model detailed, complex, three-dimensional (3-D) geometries. These advantages allow more accurate burnup results to be obtained, provided that the user possesses the required computing power (which is required for discrete ordinate methods as well). Several linkage codes have been written that combine a Monte Carlo N-particle transport code (such as MCNP TM ) with a radioactive decay and burnup code. This paper describes one such code that was written at Los Alamos National Laboratory: monteburns. Monteburns links MCNP with the isotope generation and depletion code ORIGEN2. The basis for the development of monteburns was the need for a fully automated code that could perform accurate burnup (and other) calculations for any 3-D system (accelerator-driven or a full reactor core). Before the initial development of monteburns, a list of desired attributes was made and is given below. o The code should be fully automated (that is, after the input is set up, no further user interaction is required). . The code should allow for the irradiation of several materials concurrently (each material is evaluated collectively in MCNP and burned separately in 0RIGEN2). o The code should allow the transfer of materials (shuffling) between regions in MCNP. . The code should allow any materials to be added or removed before, during, or after each step in an automated fashion. . The code should not require the user to provide input for 0RIGEN2 and should have minimal MCNP input file requirements (other than a working MCNP deck). . The code should be relatively easy to use

Research and Development of Fully Automatic Alien Smoke Stack and Packaging System

Science.gov (United States)

Yang, Xudong; Ge, Qingkuan; Peng, Tao; Zuo, Ping; Dong, Weifu

2017-12-01

The problem of low efficiency of manual sorting packaging for the current tobacco distribution center, which developed a set of safe efficient and automatic type of alien smoke stack and packaging system. The functions of fully automatic alien smoke stack and packaging system adopt PLC control technology, servo control technology, robot technology, image recognition technology and human-computer interaction technology. The characteristics, principles, control process and key technology of the system are discussed in detail. Through the installation and commissioning fully automatic alien smoke stack and packaging system has a good performance and has completed the requirements for shaped cigarette.

Validating self-reported mobile phone use in adults using a newly developed smartphone application

NARCIS (Netherlands)

Goedhart, Geertje; Kromhout, Hans; Wiart, Joe; Vermeulen, Roel

2015-01-01

OBJECTIVE: Interpretation of epidemiological studies on health effects from mobile phone use is hindered by uncertainties in the exposure assessment. We used a newly developed smartphone application (app) to validate self-reported mobile phone use and behaviour among adults. METHODS: 107

Micro-computed tomography newly developed for in vivo small animal imaging

International Nuclear Information System (INIS)

Arai, Yoshinori; Ninomiya, Tadashi; Kato, Takafumi; Masuda, Yuji

2005-01-01

The aim of this paper is to report a newly developed micro-computed tomography system for in vivo use. The system was composed of a micro-focus X-ray tube and an image intensifier (I.I.), both of which rotated around the object stage. A guinea pig and a rat were examined. The anesthetized animal was set on the secure object stage. Images of the head of the guinea pig and the tibia knee joint of the rat were taken. In addition, an image of the rat's tail was taken. The reconstruction and the image viewing were carried out using I-View software. The voxel matrix was 512 x 512 x 384. The voxel sizes ranged from 10 x 10 x 10 μm to 100 x 100 x 100 μm. The exposure time was 17 s, and the reconstruction time was 150 s. The head of the guinea pig and the tibia/knee joint of the rat were observed clearly under 100-μm and 30μm voxels, respectively. The trabecular bone of the tail was also observed clearly under a 10 μm voxel. The newly developed micro-computed tomography system makes it possible to obtain images of anesthetized animals set on a secure object stage. Clear bone images of the small animals could be obtained within a short time. (author)

Fully automated muscle quality assessment by Gabor filtering of second harmonic generation images

Science.gov (United States)

Paesen, Rik; Smolders, Sophie; Vega, José Manolo de Hoyos; Eijnde, Bert O.; Hansen, Dominique; Ameloot, Marcel

2016-02-01

Although structural changes on the sarcomere level of skeletal muscle are known to occur due to various pathologies, rigorous studies of the reduced sarcomere quality remain scarce. This can possibly be explained by the lack of an objective tool for analyzing and comparing sarcomere images across biological conditions. Recent developments in second harmonic generation (SHG) microscopy and increasing insight into the interpretation of sarcomere SHG intensity profiles have made SHG microscopy a valuable tool to study microstructural properties of sarcomeres. Typically, sarcomere integrity is analyzed by fitting a set of manually selected, one-dimensional SHG intensity profiles with a supramolecular SHG model. To circumvent this tedious manual selection step, we developed a fully automated image analysis procedure to map the sarcomere disorder for the entire image at once. The algorithm relies on a single-frequency wavelet-based Gabor approach and includes a newly developed normalization procedure allowing for unambiguous data interpretation. The method was validated by showing the correlation between the sarcomere disorder, quantified by the M-band size obtained from manually selected profiles, and the normalized Gabor value ranging from 0 to 1 for decreasing disorder. Finally, to elucidate the applicability of our newly developed protocol, Gabor analysis was used to study the effect of experimental autoimmune encephalomyelitis on the sarcomere regularity. We believe that the technique developed in this work holds great promise for high-throughput, unbiased, and automated image analysis to study sarcomere integrity by SHG microscopy.

Assessing College Students' Perceptions of a Case Teacher's Pedagogical Content Knowledge Using a Newly Developed Instrument

Science.gov (United States)

Jang, Syh-Jong

2011-01-01

Ongoing professional development for college teachers has been much emphasized. However, previous research on learning environments has seldom addressed college students' perceptions of teachers' PCK. This study aimed to evaluate college students' perceptions of a physics teacher's PCK development using a newly developed instrument and workshop…

Applicability of newly developed 610MPa class heavy thickness high strength steel to boiler pressure vessel

Energy Technology Data Exchange (ETDEWEB)

Katayama, Norihiko; Kaihara, Shoichiro; Ishii, Jun [Ishikawajima-Harima Heavy Industries Corp., Yokohama (Japan); Kajigaya, Ichiro [Ishikawajima-Harima Heavy Industries Corp., Tokyo (Japan); Totsuka, Takehiro; Miyazaki, Takashi [Ishikawajima-Harima Heavy Industries Corp., Aioi (Japan)

1995-11-01

Construction of a 350 MW Class PFBC (Pressurized Fluidized Bed Combustion) boiler plant is under planning in Japan. Design temperature and pressure of the vessel are maximum 350 C and 1.69 MPa, respectively. As the plate thickness of the vessel exceeds over 100 mm, high strength steel plate of good weldability and less susceptible to reheat cracking was required and developed. The steel was aimed to satisfy the tensile strength over 610 MPa at 350 C after postweld heat treatment (PWHT), with good notch toughness. The authors investigated the welding performances of the newly developed steel by using 150 mm-thick plate welded by pulsed-MAG and SAW methods. It was confirmed that the newly developed steel and its welds possess sufficient strength and toughness after PWHT, and applicable to the actual pressure vessel.

Fundamental Characteristics of the Newly Developed ATA™ Membrane Dialyzer.

Science.gov (United States)

Sunohara, Takashi; Masuda, Toshiaki

2017-01-01

Dialysis membranes are often made from synthetic polymers, such as polysulfone. However, membranes made from cellulose triacetate have superior biocompatibility and have been used since the 1980s. On-line hemodiafiltration treatment accompanied by massive fluid replacement is increasingly being used in Europe and Japan, but cellulose triacetate is not suitable for this treatment. Our newly developed asymmetric triacetate membrane, the ATA™ membrane, substantially improved the filtration properties and blood compatibility because of the asymmetric structure and smooth surface of this cellulose acetate membrane. Key Message: The ATA membrane maintains its high permeability even after massive filtration and shows less temporal variation in its permeation performance, lower protein adsorption, and superior biocompatibility compared with conventional membranes. © 2017 S. Karger AG, Basel.

Multifractal scaling at the Kolmogorov microscale in fully developed compressible turbulence

International Nuclear Information System (INIS)

Shivamoggi, B.K.

1995-01-01

In this paper, some aspects of multifractal scaling at the Kolmogorov microscale in fully developed compressible turbulence are considered. These considerations, on the one hand, provide an insight into the mechanism of compressible turbulence, and on the other hand enable one to determine the robustness of some known results in incompressible turbulence. copyright 1995 Academic Press, Inc

Fully Depleted Charge-Coupled Devices

International Nuclear Information System (INIS)

Holland, Stephen E.

2006-01-01

We have developed fully depleted, back-illuminated CCDs that build upon earlier research and development efforts directed towards technology development of silicon-strip detectors used in high-energy-physics experiments. The CCDs are fabricated on the same type of high-resistivity, float-zone-refined silicon that is used for strip detectors. The use of high-resistivity substrates allows for thick depletion regions, on the order of 200-300 um, with corresponding high detection efficiency for near-infrared and soft x-ray photons. We compare the fully depleted CCD to the p-i-n diode upon which it is based, and describe the use of fully depleted CCDs in astronomical and x-ray imaging applications

PHL10/460: Cancerfacts.com - Vertical Portal with Newly Developed Health Profiler

OpenAIRE

Lenz, C; Brucksch, M

1999-01-01

Introduction Unlike general health portals such as WebMD and Drkoop.com that cover everything from the flu to heart disease, Silicon Valley-based cancerfacts.com is a so-called vertical portal. It covers only one small vertical niche of health care: cancer, and in particular, prostate cancer. As a value-added proprietary technology, the company offers its newly developed profile engine to health information retrievers. Methods Users are enabled to insert their specific medical information - r...

Iron Oxide Nanoparticle-Based Magnetic Ink Development for Fully Printed Tunable Radio-Frequency Devices

KAUST Repository

Vaseem, Mohammad

2018-01-30

The field of printed electronics is still in its infancy and most of the reported work is based on commercially available nanoparticle-based metallic inks. Although fully printed devices that employ dielectric/semiconductor inks have recently been reported, there is a dearth of functional inks that can demonstrate controllable devices. The lack of availability of functional inks is a barrier to the widespread use of fully printed devices. For radio-frequency electronics, magnetic materials have many uses in reconfigurable components but rely on expensive and rigid ferrite materials. A suitable magnetic ink can facilitate the realization of fully printed, magnetically controlled, tunable devices. This report presents the development of an iron oxide nanoparticle-based magnetic ink. First, a tunable inductor is fully printed using iron oxide nanoparticle-based magnetic ink. Furthermore, iron oxide nanoparticles are functionalized with oleic acid to make them compatible with a UV-curable SU8 solution. Functionalized iron oxide nanoparticles are successfully embedded in the SU8 matrix to make a magnetic substrate. The as-fabricated substrate is characterized for its magnetostatic and microwave properties. A frequency tunable printed patch antenna is demonstrated using the magnetic and in-house silver-organo-complex inks. This is a step toward low-cost, fully printed, controllable electronic components.

The fully Mobile City Government Project (MCity)

DEFF Research Database (Denmark)

Scholl, Hans; Fidel, Raya; Mai, Jens Erik

2006-01-01

The Fully Mobile City Government Project, also known as MCity, is an interdisciplinary research project on the premises, requirements, and effects of fully mobile, wirelessly connected applications (FWMC). The project will develop an analytical framework for interpreting the interaction and inter......The Fully Mobile City Government Project, also known as MCity, is an interdisciplinary research project on the premises, requirements, and effects of fully mobile, wirelessly connected applications (FWMC). The project will develop an analytical framework for interpreting the interaction...

Newly developed semi-empirical formulas for (p, α) at 17.9 MeV and ...

Indian Academy of Sciences (India)

Home; Journals; Pramana – Journal of Physics; Volume 74; Issue 6. Newly developed semi-empirical formulas for (, ) at 17.9 MeV and (, ) at 22.3 MeV reaction cross-sections. Eyyup Tel Abdullah Aydin E Gamze Aydin Abdullah Kaplan Ömer Yavaş İskender A Reyhancan. Research Articles Volume 74 Issue 6 June ...

A look-up table for fully developed film-boiling heat transfer

International Nuclear Information System (INIS)

Groeneveld, D.C.; Leung, L.K.H.; Vasic, A.Z.; Guo, Y.J.; Cheng, S.C.

2003-01-01

An improved look-up table for film-boiling heat-transfer coefficients has been derived for steam-water flow inside vertical tubes. Compared to earlier versions of the look-up table, the following improvements were made: - The database has been expanded significantly. The present database contains 77,234 film-boiling data points obtained from 36 sources. - The upper limit of the thermodynamic quality range was increased from 1.2 to 2.0. The wider range was needed as non-equilibrium effects at low flows can extend well beyond the point where the thermodynamic quality equals unity. - The surface heat flux has been replaced by the surface temperature as an independent parameter. - The new look-up table is based only on fully developed film-boiling data. - The table entries at flow conditions for which no data are available is based on the best of five different film-boiling prediction methods. The new film-boiling look-up table predicts the database for fully developed film-boiling data with an overall rms error in heat-transfer coefficient of 10.56% and an average error of 1.71%. A comparison of the prediction accuracy of the look-up table with other leading film-boiling prediction methods shows that the look-up table results in a significant improvement in prediction accuracy

The newly developed Toyota plug-in hybrid system

Energy Technology Data Exchange (ETDEWEB)

Takaoka, Toshifumi; Ichinose, Hiroki [Toyota Motor Corporation (Japan)

2010-07-01

Toyota has been introducing several hybrid vehicles (HV) as a countermeasure to the automobile's concerns, like CO2 reduction, energy security, and emission reduction in urban areas. A next step towards an even more effective solution for these concerns is a plug-in hybrid vehicle (PHV). This vehicle combines the advantages of electric vehicles (EV), which use clean electric energy, and HV, with it's high environmental potential and user- friendliness comparable to conventional vehicles, such as a long cruising range. This paper describes a newly developed plug-in hybrid system and its vehicle performance. This system uses a Li-ion battery with high energy density and has an affordable EV range without sacrificing cabin space. The vehicle achieves a CO2 emission of 59g/km and meets the most stringent emission regulations in the world. The new PHV is a forerunner of the large-scale mass production PHV two years later. PHVs have the potential to become popular as a realistic solution towards sustainable mobility by renewable electricity usage in the future. (orig.)

How Schools Can Promote Healthy Development for Newly Arrived Immigrant and Refugee Adolescents: Research Priorities

Science.gov (United States)

McNeely, Clea A.; Morland, Lyn; Doty, S. Benjamin; Meschke, Laurie L.; Awad, Summer; Husain, Altaf; Nashwan, Ayat

2017-01-01

Background: The US education system must find creative and effective ways to foster the healthy development of the approximately 2 million newly arrived immigrant and refugee adolescents, many of whom contend with language barriers, limited prior education, trauma, and discrimination. We identify research priorities for promoting the school…

A computer literacy scale for newly enrolled nursing college students: development and validation.

Science.gov (United States)

Lin, Tung-Cheng

2011-12-01

Increasing application and use of information systems and mobile technologies in the healthcare industry require increasing nurse competency in computer use. Computer literacy is defined as basic computer skills, whereas computer competency is defined as the computer skills necessary to accomplish job tasks. Inadequate attention has been paid to computer literacy and computer competency scale validity. This study developed a computer literacy scale with good reliability and validity and investigated the current computer literacy of newly enrolled students to develop computer courses appropriate to students' skill levels and needs. This study referenced Hinkin's process to develop a computer literacy scale. Participants were newly enrolled first-year undergraduate students, with nursing or nursing-related backgrounds, currently attending a course entitled Information Literacy and Internet Applications. Researchers examined reliability and validity using confirmatory factor analysis. The final version of the developed computer literacy scale included six constructs (software, hardware, multimedia, networks, information ethics, and information security) and 22 measurement items. Confirmatory factor analysis showed that the scale possessed good content validity, reliability, convergent validity, and discriminant validity. This study also found that participants earned the highest scores for the network domain and the lowest score for the hardware domain. With increasing use of information technology applications, courses related to hardware topic should be increased to improve nurse problem-solving abilities. This study recommends that emphases on word processing and network-related topics may be reduced in favor of an increased emphasis on database, statistical software, hospital information systems, and information ethics.

Newly developed chitosan-silver hybrid nanoparticles: biosafety and apoptosis induction in HepG2 cells

International Nuclear Information System (INIS)

El-Sherbiny, Ibrahim M.; Salih, Ehab; Yassin, Abdelrahman M.; Hafez, Elsayed E.

2016-01-01

The present study reports the biosafety assessment, the exact molecular effects, and apoptosis induction of newly developed chitosan-silver hybrid nanoparticles (Cs–Ag NPs) in HepG2 cells. The investigated hybrid NPs were green synthesized using Cs/grape leaves aqueous extract (Cs/GLE) or Cs/GLE NPs as reducing and stabilizing agents. The successful formation of Cs/GLE NPs and Cs–Ag hybrid NPs has been confirmed by UV–Vis spectrophotometry, FTIR spectroscopy, XRD, and HRTEM. From the TEM analysis, the prepared Cs/GLE NPs are uniform and spherical with an average size of 150 nm, and the AgNPs (5–10 nm) were formed mainly on their surface. The UV–Vis spectra of Cs–Ag NPs showed a surface plasmon resonance (SPR) peak at about 450 nm confirming their formation. The synthesized Cs–Ag NPs were found to be crystalline as shown by XRD patterns with fcc phase oriented along the (111), (200), (220), and (311) planes. The cytotoxicity patterns, the antiproliferative activities, and the possible mechanisms of anticancer activity at molecular level of the newly developed Cs–Ag hybrid NPs were investigated. Cytotoxicity patterns of all the preparations demonstrated that the nontoxic treatment concentrations are ranged from 0.39 to 50 %, and many of the newly prepared Cs–Ag hybrid NPs showed high anticancer activities against HpG2 cells, and induced cellular apoptosis by downregulating BCL2 gene and upregulating P53.Graphical Abstract

Newly developed chitosan-silver hybrid nanoparticles: biosafety and apoptosis induction in HepG2 cells

Energy Technology Data Exchange (ETDEWEB)

El-Sherbiny, Ibrahim M., E-mail: ielsherbiny@Zewailcity.edu.eg; Salih, Ehab [Zewail City of Science and Technology, Center for Materials Science (Egypt); Yassin, Abdelrahman M. [Genetic Engineering and Biotechnology Research Institute, City of Scientific Research and Technology Applications, Biopharmaceutical Product Research Department (Egypt); Hafez, Elsayed E. [City of Scientific Research and Technology Applications, Plant Protection and Biomolecular Diagnosis Department (Egypt)

2016-07-15

The present study reports the biosafety assessment, the exact molecular effects, and apoptosis induction of newly developed chitosan-silver hybrid nanoparticles (Cs–Ag NPs) in HepG2 cells. The investigated hybrid NPs were green synthesized using Cs/grape leaves aqueous extract (Cs/GLE) or Cs/GLE NPs as reducing and stabilizing agents. The successful formation of Cs/GLE NPs and Cs–Ag hybrid NPs has been confirmed by UV–Vis spectrophotometry, FTIR spectroscopy, XRD, and HRTEM. From the TEM analysis, the prepared Cs/GLE NPs are uniform and spherical with an average size of 150 nm, and the AgNPs (5–10 nm) were formed mainly on their surface. The UV–Vis spectra of Cs–Ag NPs showed a surface plasmon resonance (SPR) peak at about 450 nm confirming their formation. The synthesized Cs–Ag NPs were found to be crystalline as shown by XRD patterns with fcc phase oriented along the (111), (200), (220), and (311) planes. The cytotoxicity patterns, the antiproliferative activities, and the possible mechanisms of anticancer activity at molecular level of the newly developed Cs–Ag hybrid NPs were investigated. Cytotoxicity patterns of all the preparations demonstrated that the nontoxic treatment concentrations are ranged from 0.39 to 50 %, and many of the newly prepared Cs–Ag hybrid NPs showed high anticancer activities against HpG2 cells, and induced cellular apoptosis by downregulating BCL2 gene and upregulating P53.Graphical Abstract.

Flow Reversal of Fully-Developed Mixed MHD Convection in Vertical Channels

International Nuclear Information System (INIS)

Saleh, H.; Hashim, I.

2010-01-01

The present analysis is concerned with flow reversal phenomena of the fully-developed laminar combined free and forced MHD convection in a vertical parallel-plate channel. The effect of viscous dissipation is taken into account. Flow reversal adjacent to the cold (or hot) wall is found to exist within the channel as Gr/Re is above (or below) a threshold value. Parameter zones for the occurrence of reversed flow are presented. (fundamental areas of phenomenology(including applications))

Computational Investigation on Fully Developed Periodic Laminar Flow Structure in Baffled Circular Tube with Various BR

Directory of Open Access Journals (Sweden)

Withada Jedsadaratanachai

2014-01-01

Full Text Available This paper presents a 3D numerical analysis of fully developed periodic laminar flow in a circular tube fitted with 45° inclined baffles with inline arrangement. The computations are based on a finite volume method, and the SIMPLE algorithm has been implemented. The characteristics of fluid flow are presented for Reynolds number, Re = 100–1000, based on the hydraulic diameter (D of the tube. The angled baffles were repeatedly inserted at the middle of the test tube with inline arrangement to generate vortex flows over the tested tube. Effects of different Reynolds numbers and blockage ratios (b/D, BR with a single pitch ratio of 1 on flow structure in the tested tube were emphasized. The flows in baffled tube show periodic flow at x/D ≈ 2-3, and become a fully developed periodic flow profiles at x/D ≈ 6-7, depending on Re, BR and transverse plane positions. The computational results reveal that the higher of BR and closer position of turbulators, the faster of fully developed periodic flow profiles.

Investigation of the required length for fully developed pipe flow with drag-reducing polymer solutions

Science.gov (United States)

Farsiani, Yasaman; Elbing, Brian

2015-11-01

Adding trace amounts of long chain polymers into a liquid flow is known to reduce skin friction drag by up to 80%. While polymer drag reduction (PDR) has been successfully implemented in internal flows, diffusion and degradation have limited its external flow applications. A weakness in many previous PDR studies is that there was no characterization of the polymer being injected into the turbulent boundary layer, which can be accomplished by testing a sample in a pressure-drop tube. An implicit assumption in polymer characterization is that the flow is fully developed at the differential pressure measurement. While available data in the literature shows that the entry length to achieve fully developed flow increases with polymeric solutions, it is unclear how long is required to achieve fully developed flow for non-Newtonian turbulent flows. In the present study, the pressure-drop is measured across a 1.05 meter length section of a 1.04 cm inner diameter pipe. Differential pressure is measured with a pressure transducer for different entry lengths, flow and polymer solution properties. This presentation will present preliminary data on the required entrance length as well as characterization of polymer solution an estimate of the mean molecular weight.

A fully-integrated 12.5-Gb/s 850-nm CMOS optical receiver based on a spatially-modulated avalanche photodetector

NARCIS (Netherlands)

Lee, M.J.; Youn, J.S.; Park, K.Y.; Choi, W.Y.

2014-01-01

We present a fully integrated 12.5-Gb/s optical receiver fabricated with standard 0.13-µm complementary metal-oxide-semiconductor (CMOS) technology for 850-nm optical interconnect applications. Our integrated optical receiver includes a newly proposed CMOS-compatible spatially-modulated avalanche

A newly development RIA for thyroid hormone autoantibodies (THAAb)

International Nuclear Information System (INIS)

Li Fengying; Gu Liqiong; Chen Xiayin; Jin Yan; Chen Shuxian; Zhang Qun; Qiu Hongxia; Yang Jingren; Zhao Yongju; Chen Mingdao

2004-01-01

Objective: To report a newly developed RIA for THAAb from this laboratory. Methods: The tested serum samples were cultured with labelled thyroid hormone analogous ( 125 I T 3 , 125 I T 4 ) for 16 hours. Antigen-antibody complex was precipitated with anti-human IgG (immune precipitation method) and radio-activity determined. Results: The mean positive rate of THAAb in healthy euthyroid controls (n=186) was only 1.07%. The mean positive rate in patients with thyroid disorders was 14.4% (mean rate 13.5% in hyperthyroid subjects, n=118 and mean rate 15.2% in hypothyroid subjects, n=72). The serum THAAb titer could be markedly lowered after adding non-labelled thyroid hormones (P 3 and FT 4 would be significantly lowered (P 3 , FT 4 levels. In patients with positive THAAb (about 14.4% in patients with all thyroid disorders), the FT 3 , FT 4 levels were best determined after PEG precipitation. (authors)

Muscle Attenuation Is Associated With Newly Developed Hypertension in Men of African Ancestry.

Science.gov (United States)

Zhao, Qian; Zmuda, Joseph M; Kuipers, Allison L; Bunker, Clareann H; Patrick, Alan L; Youk, Ada O; Miljkovic, Iva

2017-05-01

Increased ectopic adipose tissue infiltration in skeletal muscle is associated with insulin resistance and diabetes mellitus. We evaluated whether change in skeletal muscle adiposity predicts subsequent development of hypertension in men of African ancestry, a population sample understudied in previous studies. In the Tobago Health Study, a prospective longitudinal study among men of African ancestry (age range 40-91 years), calf intermuscular adipose tissue, and skeletal muscle attenuation were measured with computed tomography. Hypertension was defined as a systolic blood pressure ≥140 mm Hg, or a diastolic blood pressure ≥90 mm Hg, or receiving antihypertensive medications. Logistic regression was performed with adjustment for age, insulin resistance, baseline and 6-year change in body mass index, baseline and 6-year change in waist circumference, and other potential confounding factors. Among 746 normotensive men at baseline, 321 (43%) developed hypertension during the mean 6.2 years of follow-up. Decreased skeletal muscle attenuation was associated with newly developed hypertension after adjustment for baseline and 6-year change of body mass index (odds ratio [95% confidence interval] per SD, 1.3 [1.0-1.6]) or baseline and 6-year change of waist circumference (odds ratio [95% confidence interval] per SD, 1.3 [1.0-1.6]). No association was observed between increased intermuscular adipose tissue and hypertension. Our novel findings show that decreased muscle attenuation is associated with newly developed hypertension among men of African ancestry, independent of general and central adiposity and insulin resistance. Further studies are needed to adjust for inflammation, visceral and other ectopic adipose tissue depots, and to confirm our findings in other population samples. © 2017 American Heart Association, Inc.

Experimental Studies on the Behavior of a Newly-Developed Type of Self-Insulating Concrete Masonry Shear Wall under in-Plane Cyclic Loading

Directory of Open Access Journals (Sweden)

Abu-Bakre Abdelmoneim Elamin Mohamad

2017-04-01

Full Text Available This study aimed to investigate the inelastic behavior of a newly-developed type of self-insulating concrete masonry shear wall (SCMSW under in-plane cyclic loading. The new masonry system was made from concrete blocks with special configurations to provide a stronger bond between units than ordinary concrete masonry units. A total of six fully-grouted SCMSWs were prepared with different heights (1.59 to 5.78 m and different vertical steel configurations. The developed masonry walls were tested under in-plane cyclic loading and different constant axial load ratios. In addition, the relationship between the amount of axial loading, the amount of the flexural reinforcement and the wall aspect ratios and the nonlinear hysteretic response of the SCMSW was evaluated. The results showed that the lateral load capacity of SCMSW increases with the amount of applied axial load and the amount of vertical reinforcement. However, the lateral load capacity decreases as the wall aspect ratio increases. The existence of the boundary elements at the SCMSW ends increases the ductility and the lateral load capacity. Generally, the SCMSW exhibited predominantly flexural behavior. These results agreed with those reported in previous research for walls constructed with ordinary units.

Fully-developed heat transfer in annuli with viscous dissipation

Energy Technology Data Exchange (ETDEWEB)

Coelho, P.M. [Universidade do Porto, Porto (Portugal). Centro de Estudos de Fenomenos de Transporte, DEMEGI, Faculdade de Engenharia; Pinho, F.T. [Universidade do Porto, Porto (Portugal). Centro de Estudos de Fenomenos de Transporte, Faculdade de Engenharia

2006-09-15

For Newtonian concentric annular flows analytical solutions are obtained under imposed asymmetric constant wall heat fluxes as well as under imposed asymmetric constant wall temperatures, taking into account viscous dissipation and for fluid dynamic and thermally fully-developed conditions. Results for the special case of the heat flux ratio for identical wall temperatures and the critical Brinkman numbers marking changes of sign in wall heat fluxes are also derived. Equations are presented for the Nusselt numbers at the inner and outer walls, bulk temperature and normalised temperature distribution as a function of all relevant non-dimensional numbers. Given the complexity of the derived equations, simpler exact expressions are presented for the Nusselt numbers for ease of use, with their coefficients given in tables as a function of the radius ratio. (author)

Osborne Reynolds pipe flow: direct numerical simulation from laminar to fully-developed turbulence

Science.gov (United States)

Adrian, R. J.; Wu, X.; Moin, P.; Baltzer, J. R.

2014-11-01

Osborne Reynolds' pipe experiment marked the onset of modern viscous flow research, yet the detailed mechanism carrying the laminar state to fully-developed turbulence has been quite elusive, despite notable progress related to dynamic edge-state theory. Here, we continue our direct numerical simulation study on this problem using a 250R long, spatially-developing pipe configuration with various Reynolds numbers, inflow disturbances, and inlet base flow states. For the inlet base flow, both fully-developed laminar profile and the uniform plug profile are considered. Inlet disturbances consist of rings of turbulence of different width and radial location. In all the six cases examined so far, energy norms show exponential growth with axial distance until transition after an initial decay near the inlet. Skin-friction overshoots the Moody's correlation in most, but not all, the cases. Another common theme is that lambda vortices amplified out of susceptible elements in the inlet disturbances trigger rapidly growing hairpin packets at random locations and times, after which infant turbulent spots appear. Mature turbulent spots in the pipe transition are actually tight concentrations of hairpin packets looking like a hairpin forest. The plug flow inlet profile requires much stronger disturbances to transition than the parabolic profile.

Predictive score for the development or progression of Graves' orbitopathy in patients with newly diagnosed Graves' hyperthyroidism

DEFF Research Database (Denmark)

Wiersinga, Wilmar; Žarković, Miloš; Bartalena, Luigi

2018-01-01

OBJECTIVE: To construct a predictive score for the development or progression of Graves' orbitopathy (GO) in Graves' hyperthyroidism (GH). DESIGN: Prospective observational study in patients with newly diagnosed GH, treated with antithyroid drugs (ATD) for 18 months at ten participating centers f...

Pressure drop performance evaluation for test assemblies with the newly developed top and bottom nozzles

International Nuclear Information System (INIS)

Lee, S. K.; Park, N. K.; Su, J. M.; Kim, H. K.; Lee, J. N.; Kim, K. T.

2003-01-01

To perform the hydraulic test for the newly developed top and bottom nozzles, two kinds of test assemblies were manufactured i. e. one is the test assembly which has the newly developed top and bottom nozzles and the other is Guardian test assembly which is commercially in mass production now. The test results show that the test assembly with one top nozzle and two bottom nozzles has a greater pressure loss coefficient than Guardian test assembly by 60.9% and 90.4% at the bottom nozzle location. This cause is due to the debris filtering plate for bottom nozzle to improve a filtering efficiency aginst foreign material. In the region of mid grid and top nozzle, there is no difference in pressure loss coefficient between the test assemblies since the componet features in these regions are very similar or same each other. The loss coefficients are 14.2% and 21.9% for model A and B respectively in the scale of test assembly, and the value would be within the 10% in the scale of real fuel assembly. As a result of hydraulic performance evaluation, model A is superior to model B

How Schools Can Promote Healthy Development for Newly Arrived Immigrant and Refugee Adolescents: Research Priorities.

Science.gov (United States)

McNeely, Clea A; Morland, Lyn; Doty, S Benjamin; Meschke, Laurie L; Awad, Summer; Husain, Altaf; Nashwan, Ayat

2017-02-01

The US education system must find creative and effective ways to foster the healthy development of the approximately 2 million newly arrived immigrant and refugee adolescents, many of whom contend with language barriers, limited prior education, trauma, and discrimination. We identify research priorities for promoting the school success of these youth. The study used the 4-phase priority-setting method of the Child Health and Nutrition Research Initiative. In the final stage, 132 researchers, service providers, educators, and policymakers based in the United States were asked to rate the importance of 36 research options. The highest priority research options (range 1 to 5) were: evaluating newcomer programs (mean = 4.44, SD = 0.55), identifying how family and community stressors affect newly arrived immigrant and refugee adolescents' functioning in school (mean = 4.40, SD = 0.56), identifying teachers' major stressors in working with this population (mean = 4.36, SD = 0.72), and identifying how to engage immigrant and refugee families in their children's education (mean = 4.35, SD = 0.62). These research priorities emphasize the generation of practical knowledge that could translate to immediate, tangible benefits for schools. Funders, schools, and researchers can use these research priorities to guide research for the highest benefit of schools and the newly arrived immigrant and refugee adolescents they serve. © 2017, American School Health Association.

A multi-method approach to curriculum development for in-service training in China's newly established health emergency response offices.

Directory of Open Access Journals (Sweden)

Yadong Wang

Full Text Available To describe an innovative approach for developing and implementing an in-service curriculum in China for staff of the newly established health emergency response offices (HEROs, and that is generalisable to other settings.The multi-method training needs assessment included reviews of the competency domains needed to implement the International Health Regulations (2005 as well as China's policies and emergency regulations. The review, iterative interviews and workshops with experts in government, academia, the military, and with HERO staff were reviewed critically by an expert technical advisory panel.Over 1600 participants contributed to curriculum development. Of the 18 competency domains identified as essential for HERO staff, nine were developed into priority in-service training modules to be conducted over 2.5 weeks. Experts from academia and experienced practitioners prepared and delivered each module through lectures followed by interactive problem-solving exercises and desktop simulations to help trainees apply, experiment with, and consolidate newly acquired knowledge and skills.This study adds to the emerging literature on China's enduring efforts to strengthen its emergency response capabilities since the outbreak of SARS in 2003. The multi-method approach to curriculum development in partnership with senior policy-makers, researchers, and experienced practitioners can be applied in other settings to ensure training is responsive and customized to local needs, resources and priorities. Ongoing curriculum development should reflect international standards and be coupled with the development of appropriate performance support systems at the workplace for motivating staff to apply their newly acquired knowledge and skills effectively and creatively.

A multi-method approach to curriculum development for in-service training in China's newly established health emergency response offices.

Science.gov (United States)

Wang, Yadong; Li, Xiangrui; Yuan, Yiwen; Patel, Mahomed S

2014-01-01

To describe an innovative approach for developing and implementing an in-service curriculum in China for staff of the newly established health emergency response offices (HEROs), and that is generalisable to other settings. The multi-method training needs assessment included reviews of the competency domains needed to implement the International Health Regulations (2005) as well as China's policies and emergency regulations. The review, iterative interviews and workshops with experts in government, academia, the military, and with HERO staff were reviewed critically by an expert technical advisory panel. Over 1600 participants contributed to curriculum development. Of the 18 competency domains identified as essential for HERO staff, nine were developed into priority in-service training modules to be conducted over 2.5 weeks. Experts from academia and experienced practitioners prepared and delivered each module through lectures followed by interactive problem-solving exercises and desktop simulations to help trainees apply, experiment with, and consolidate newly acquired knowledge and skills. This study adds to the emerging literature on China's enduring efforts to strengthen its emergency response capabilities since the outbreak of SARS in 2003. The multi-method approach to curriculum development in partnership with senior policy-makers, researchers, and experienced practitioners can be applied in other settings to ensure training is responsive and customized to local needs, resources and priorities. Ongoing curriculum development should reflect international standards and be coupled with the development of appropriate performance support systems at the workplace for motivating staff to apply their newly acquired knowledge and skills effectively and creatively.

Development of a fully automated online mixing system for SAXS protein structure analysis

DEFF Research Database (Denmark)

Nielsen, Søren Skou; Arleth, Lise

2010-01-01

This thesis presents the development of an automated high-throughput mixing and exposure system for Small-Angle Scattering analysis on a synchrotron using polymer microfluidics. Software and hardware for both automated mixing, exposure control on a beamline and automated data reduction...... and preliminary analysis is presented. Three mixing systems that have been the corner stones of the development process are presented including a fully functioning high-throughput microfluidic system that is able to produce and expose 36 mixed samples per hour using 30 μL of sample volume. The system is tested...

Torsion effect on fully developed flow in a helical pipe

Science.gov (United States)

Kao, Hsiao C.

1987-01-01

Two techniques, a series expansion method of perturbed Poiseuille flow valid for low Dean numbers and a solution of the complete Navier-Stokes equation applicable to intermediate Dean values, are used to investigate the torsion effect on the fully developed laminar flow in a helical pipe of constant circular cross section. For the secondary flow patterns, the results show that the presence of torsion can produce a significant effect if the ratio of the curvature to the torsion is of order unity. The secondary flow is distorted in these cases. It is noted that the torsion effect is, however, usually small, and that the secondary flow has the usual pattern of a pair of counter-rotating vortices of nearly equal strength.

Association Between Manual Loading and Newly Developed Carpal Tunnel Syndrome in Subjects With Physical Disabilities: A Follow-Up Study.

Science.gov (United States)

Lin, Yen-Nung; Chiu, Chun-Chieh; Huang, Shih-Wei; Hsu, Wen-Yen; Liou, Tsan-Hon; Chen, Yi-Wen; Chang, Kwang-Hwa

2017-10-01

To identify the association between body composition and newly developed carpal tunnel syndrome (CTS) and to search for the best probabilistic cutoff value of associated factors to predict subjects with physical disabilities developing new CTS. Longitudinal. University-affiliated medical center. Subjects with physical disabilities (N=47; mean age ± SD, 42.1±7.7y). Not applicable. Median and ulnar sensory nerve conduction velocity (SNCV) were measured at the initial and follow-up tests (interval >2y). Total and regional body composition were measured with dual-energy x-ray absorptiometry at the initial test. Leg lean tissue percentage was calculated to delineate each participant's manual loading degree during locomotion. Leg lean tissue percentage is the lean tissue mass of both legs divided by body weight. Based on median SNCV changes, we divided all participants into 3 groups: subjects with bilateral CTS (median SNCV value normative ulnar SNCV value >37.8m/s) in the initial test (n=10), subjects with newly developed CTS in the follow-up test (n=8), and subjects without additional CTS in the follow-up test (n=27). Eight of 35 subjects not having bilateral CTS initially developed new CTS (8.8% per year; mean follow-up period, 2.6y). Leg lean tissue percentage was associated with the probability of newly developed CTS (adjusted odds ratio, .64; P12% were less likely to have developed new CTS at the follow-up test (sensitivity, .75; specificity, .85; area under the curve, .88; Pphysical disabilities. Therefore, a preventive program for those subjects at risk can start early. Copyright © 2017 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Fully integrated biochip platforms for advanced healthcare.

Science.gov (United States)

Carrara, Sandro; Ghoreishizadeh, Sara; Olivo, Jacopo; Taurino, Irene; Baj-Rossi, Camilla; Cavallini, Andrea; de Beeck, Maaike Op; Dehollain, Catherine; Burleson, Wayne; Moussy, Francis Gabriel; Guiseppi-Elie, Anthony; De Micheli, Giovanni

2012-01-01

Recent advances in microelectronics and biosensors are enabling developments of innovative biochips for advanced healthcare by providing fully integrated platforms for continuous monitoring of a large set of human disease biomarkers. Continuous monitoring of several human metabolites can be addressed by using fully integrated and minimally invasive devices located in the sub-cutis, typically in the peritoneal region. This extends the techniques of continuous monitoring of glucose currently being pursued with diabetic patients. However, several issues have to be considered in order to succeed in developing fully integrated and minimally invasive implantable devices. These innovative devices require a high-degree of integration, minimal invasive surgery, long-term biocompatibility, security and privacy in data transmission, high reliability, high reproducibility, high specificity, low detection limit and high sensitivity. Recent advances in the field have already proposed possible solutions for several of these issues. The aim of the present paper is to present a broad spectrum of recent results and to propose future directions of development in order to obtain fully implantable systems for the continuous monitoring of the human metabolism in advanced healthcare applications.

A newly developed borehole flowmeter technology for heterogeneous aquifers

International Nuclear Information System (INIS)

Young, S.C.

1990-01-01

Extensive borehole flowmeter tests were performed at 37 fully-screened wells on a one-hectare test site to characterize the three-dimensional hydraulic conductivity field of an alluvial aquifer with a σ lnK of 4.7. During the site investigations, several major advancements with respect to borehole flowmeter technology were developed. The milestones included: (1) the development of a field-durable electromagnetic borehole flowmeter with a lower detection limit of 0.1 l/min; (2) the realization of the importance of the pumping rate with respect to the calculated value for the depth-averaged hydraulic conductivity; and (3) an evaluation of alternative methods for calculating the depth-averaged hydraulic conductivity. The predicted three-dimensional hydraulic conductivity field was compared to the results of 10 small-scale (3 to 7 m) tracer tests, information about the depositional history of the aquifer, and the results of three large-scale aquifer tests. The hydraulic conductivity data predict the major features of the tracer breakthrough curves, maps the outline of a former river meander in an aerial photograph, and leads to a geometric mean consistent with the average hydraulic conductivity of the aquifer. (Author) (14 refs., 15 figs., 2 tabs.)

Multi-scale viscosity model of turbulence for fully-developed channel flows

International Nuclear Information System (INIS)

Kriventsev, V.; Yamaguchi, A.; Ninokata, H.

2001-01-01

The full text follows. Multi-Scale Viscosity (MSV) model is proposed for estimation of the Reynolds stresses in turbulent fully-developed flow in a straight channel of an arbitrary shape. We assume that flow in an ''ideal'' channel is always stable, i.e. laminar, but turbulence is developing process of external perturbations cased by wall roughness and other factors. We also assume that real flows are always affected by perturbations of every scale lower than the size of the channel. And the turbulence is generated in form of internal, or ''turbulent'' viscosity increase to preserve stability of ''disturbed'' flow. The main idea of MSV can be expressed in the following phenomenological rule: A local deformation of axial velocity can generate the turbulence with the intensity that keeps the value of local turbulent Reynolds number below some critical value. Here, the local turbulent Reynolds number is defined as a product of value of axial velocity deformation for a given scale and generic length of this scale divided by accumulated value of laminar and turbulent viscosity of lower scales. In MSV, the only empirical parameter is the critical Reynolds number that is estimated to be around 100. It corresponds for the largest scale which is hydraulic diameter of the channel and, therefore represents the regular Reynolds number. Thus, the value Re=100 corresponds to conditions when turbulent flow can appear in case of ''significant'' (comparable with size of channel) velocity disturbance in boundary and/or initial conditions for velocity. Of course, most of real flows in channels with relatively smooth walls remain laminar for this small Reynolds number because of absence of such ''significant'' perturbations. MSV model has been applied to the fully-developed turbulent flows in straight channels such as a circular tube and annular channel. Friction factor and velocity profiles predicted with MSV are in a very good agreement with numerous experimental data. Position of

Towards a Scalable Fully-Implicit Fully-coupled Resistive MHD Formulation with Stabilized FE Methods

Energy Technology Data Exchange (ETDEWEB)

Shadid, J N; Pawlowski, R P; Banks, J W; Chacon, L; Lin, P T; Tuminaro, R S

2009-06-03

This paper presents an initial study that is intended to explore the development of a scalable fully-implicit stabilized unstructured finite element (FE) capability for low-Mach-number resistive MHD. The discussion considers the development of the stabilized FE formulation and the underlying fully-coupled preconditioned Newton-Krylov nonlinear iterative solver. To enable robust, scalable and efficient solution of the large-scale sparse linear systems generated by the Newton linearization, fully-coupled algebraic multilevel preconditioners are employed. Verification results demonstrate the expected order-of-acuracy for the stabilized FE discretization of a 2D vector potential form for the steady and transient solution of the resistive MHD system. In addition, this study puts forth a set of challenging prototype problems that include the solution of an MHD Faraday conduction pump, a hydromagnetic Rayleigh-Bernard linear stability calculation, and a magnetic island coalescence problem. Initial results that explore the scaling of the solution methods are presented on up to 4096 processors for problems with up to 64M unknowns on a CrayXT3/4. Additionally, a large-scale proof-of-capability calculation for 1 billion unknowns for the MHD Faraday pump problem on 24,000 cores is presented.

Fully plastic crack opening analyses of complex-cracked pipes for Ramberg-Osgood materials

International Nuclear Information System (INIS)

Jeong, Jae Uk; Choi, Jae Boong; Huh, Nam Su; Kim, Yun Jae

2016-01-01

The plastic influence functions for calculating fully plastic Crack opening displacement (COD) of complex-cracked pipes were newly proposed based on systematic 3-dimensional (3-D) elastic-plastic Finite element (FE) analyses using Ramberg-Osgood (R-O) relation, where global bending moment, axial tension and internal pressure are considered separately as a loading condition. Then, crack opening analyses were performed based on GE/EPRI concept by using the new plastic influence functions for complex-cracked pipes made of SA376 TP304 stainless steel, and the predicted CODs were compared with FE results based on deformation plasticity theory of tensile material behavior. From the comparison, the confidence of the proposed fully plastic crack opening solutions for complex-cracked pipes was gained. Therefore, the proposed engineering scheme for COD estimation using the new plastic influence functions can be utilized to estimate leak rate of a complex-cracked pipe for R-O material.

A Fully Developed Flow Thermofluid Model for Topology Optimization of 3D-Printed Air-Cooled Heat Exchangers

DEFF Research Database (Denmark)

Haertel, Jan Hendrik Klaas; Nellis, Gregory F.

2017-01-01

In this work, density-based topology optimization is applied to the design of the air-side surface of dry-cooled power plant condensers. A topology optimization model assuming a steady-state, thermally and fluid dynamically fully developed internal flow is developed and used for this application....

The risk of newly developed visual impairment in treated normal-tension glaucoma: 10-year follow-up.

Science.gov (United States)

Choi, Yun Jeong; Kim, Martha; Park, Ki Ho; Kim, Dong Myung; Kim, Seok Hwan

2014-12-01

To investigate the risk and risk factors for newly developed visual impairment in treated patients with normal-tension glaucoma (NTG) followed up on for 10 years. Patients with NTG, who did not have visual impairment at the initial diagnosis and had undergone intraocular pressure (IOP)-lowering treatment for more than 7 years, were included on the basis of a retrospective chart review. Visual impairment was defined as either low vision (0.05 [20/400] ≤ visual acuity (VA) visual field (VF) visual impairment, Kaplan-Meier survival analysis and generalized linear mixed effects models were utilized. During the 10.8 years mean follow-up period, 20 eyes of 16 patients were diagnosed as visual impairment (12 eyes as low vision, 8 as blindness) among 623 eyes of 411 patients. The cumulative risk of visual impairment in at least one eye was 2.8% at 10 years and 8.7% at 15 years. The risk factors for visual impairment from treated NTG were worse VF mean deviation (MD) at diagnosis and longer follow-up period. The risk of newly developed visual impairment in the treated patients with NTG was relatively low. Worse VF MD at diagnosis and longer follow-up period were associated with development of visual impairment. © 2014 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Value of a newly sequenced bacterial genome

DEFF Research Database (Denmark)

Barbosa, Eudes; Aburjaile, Flavia F; Ramos, Rommel Tj

2014-01-01

and annotation will not be undertaken. It is important to know what is lost when we settle for a draft genome and to determine the "scientific value" of a newly sequenced genome. This review addresses the expected impact of newly sequenced genomes on antibacterial discovery and vaccinology. Also, it discusses...... heightened expectations that NGS would boost antibacterial discovery and vaccine development. Although many possible drug and vaccine targets have been discovered, the success rate of genome-based analysis has remained below expectations. Furthermore, NGS has had consequences for genome quality, resulting...

Fully Integrated Biochip Platforms for Advanced Healthcare

Directory of Open Access Journals (Sweden)

Giovanni De Micheli

2012-08-01

Full Text Available Recent advances in microelectronics and biosensors are enabling developments of innovative biochips for advanced healthcare by providing fully integrated platforms for continuous monitoring of a large set of human disease biomarkers. Continuous monitoring of several human metabolites can be addressed by using fully integrated and minimally invasive devices located in the sub-cutis, typically in the peritoneal region. This extends the techniques of continuous monitoring of glucose currently being pursued with diabetic patients. However, several issues have to be considered in order to succeed in developing fully integrated and minimally invasive implantable devices. These innovative devices require a high-degree of integration, minimal invasive surgery, long-term biocompatibility, security and privacy in data transmission, high reliability, high reproducibility, high specificity, low detection limit and high sensitivity. Recent advances in the field have already proposed possible solutions for several of these issues. The aim of the present paper is to present a broad spectrum of recent results and to propose future directions of development in order to obtain fully implantable systems for the continuous monitoring of the human metabolism in advanced healthcare applications.

Underground trials on a newly developed EDW 150-2 L unit

Energy Technology Data Exchange (ETDEWEB)

Wille, G.; Klimek, K.H.

1982-01-01

Coal-getting from medium thick coalbeds (> 1.7 m) requires high-performance shearer-loaders. Machine length and adjustability have to be such as to permit smooth cutting through geological faults. Furthermore they should be suitable to cut out niches for the AFC drives so that gateroads can be driven along with the face line. The newly developed EDW 150-2 L shearer-loader meets these expectations after various mechanical and electrical improvements. The unit proved its usefulness from the beginning and in the most difficult geological conditions where other shearer-loaders normally available for the range of coalbed thickness would mostly have failed. The multiple requirements and disturbances have led to a number of separate improvements and disturbances have led to a number of separate improvements which together contribute to a basic improvement of the machine concept as far as applications, operational flexibility and safety are concerned.

A Newly Improved Modified Method Development and Validation of Bromofenac Sodium Sesquihydrate in Bulk Drug Manufacturing

OpenAIRE

Sunil Kumar Yelamanchi V; Useni Reddy Mallu; I. V Kasi Viswanath; D. Balasubramanyam; G. Narshima Murthy

2016-01-01

The main objective of this study was to develop a simple, efficient, specific, precise and accurate newly improved modified Reverse Phase High Performance Liquid Chromatographic Purity (or) Related substance method for bromofenac sodium sesquihydrate active pharmaceuticals ingredient dosage form. Validation of analytical method is the confirmation by examination and the provision of objective evidence that the particular requirements for a specific intended use are fulfilled as per ICH, USP...

A Newly Developed Nested PCR Assay for the Detection of Helicobacter pylori in the Oral Cavity.

Science.gov (United States)

Ismail, Hawazen; Morgan, Claire; Griffiths, Paul; Williams, John; Jenkins, Gareth

2016-01-01

To develop a new nested polymerase chain reaction (PCR) assay for identifying Helicobacter pylori DNA from dental plaque. H. pylori is one of the most common chronic bacterial pathogens in humans. The accurate detection of this organism is essential for proper patient management and for the eradication of the bacteria following treatment. Forty-nine patients (24 males and 25 females; mean age: 51; range, 19 to 94 y) were investigated for the presence of H. pylori in dental plaque by single-step PCR and nested PCR and in the stomach by single-step PCR, nested PCR, and histologic examination. The newly developed nested PCR assay identified H. pylori DNA in gastric biopsies of 18 patients who were histologically classified as H. pylori-positive and 2 additional biopsies of patients who were H. pylori-negative by histologic examination (20/49; 40.8%). Dental plaque samples collected before and after endoscopy from the 49 patients revealed that single-step PCR did not detect H. pylori but nested PCR was able to detect H. pylori DNA in 40.8% (20/49) patients. Nested PCR gave a higher detection rate (40.8%, 20/49) than that of histology (36.7%, 18/49) and single-step PCR. When nested PCR results were compared with histology results there was no significant difference between the 2 methods. Our newly developed nested PCR assay is at least as sensitive as histology and may be useful for H. pylori detection in patients unfit for endoscopic examination.

Characteristics of bread prepared from wheat flours blended with various kinds of newly developed rice flours.

Science.gov (United States)

Nakamura, S; Suzuki, K; Ohtsubo, K

2009-04-01

Characteristics of the bread prepared from wheat flour blended with the flour of various kinds of newly developed rice cultivars were investigated. Qualities of the bread made from wheat flour blended with rice flour have been reported to be inferior to those from 100% wheat flour bread. To improve its qualities, we searched for the new-characteristic rice flours among the various kinds of newly developed rice cultivars to blend with the wheat flour for the bread preparation. The most suitable new characteristic rices are combination of purple waxy rice, high-amylose rice, and sugary rice. Specific volume of the bread from the combination of wheat and these 3 kinds of rice flours showed higher specific volume (3.93) compared with the traditional wheat/rice bread (3.58). We adopted the novel method, continuous progressive compression test, to measure the physical properties of the dough and the bread in addition to the sensory evaluation. As a result of the selection of the most suitable rice cultivars and blending ratio with the wheat flour, we could develop the novel wheat/rice bread, of which loaf volume, physical properties, and tastes are acceptable and resistant to firming on even 4 d after the bread preparation. To increase the ratio of rice to wheat, we tried to add a part of rice as cooked rice grains. The specific volume and qualities of the bread were maintained well although the rice content of total flour increased from 30% to 40%.

The development of a fully automated radioimmunoassay instrument - micromedic systems concept 4

International Nuclear Information System (INIS)

Painter, K.

1977-01-01

The fully automatic RIA system Concept 4 by Micromedic is described in detail. The system uses antibody-coated test tubes to take up the samples. It has a maximum capacity of 200 tubes including standards and control tubes. Its advantages are, in particular, high flow rate, reproducibility, and fully automatic testing i.e. low personnel requirements. Its disadvantage are difficulties in protein assays. (ORU) [de

Establishment probability in newly founded populations

Directory of Open Access Journals (Sweden)

Gusset Markus

2012-06-01

Full Text Available Abstract Background Establishment success in newly founded populations relies on reaching the established phase, which is defined by characteristic fluctuations of the population’s state variables. Stochastic population models can be used to quantify the establishment probability of newly founded populations; however, so far no simple but robust method for doing so existed. To determine a critical initial number of individuals that need to be released to reach the established phase, we used a novel application of the “Wissel plot”, where –ln(1 – P0(t is plotted against time t. This plot is based on the equation P0t=1–c1e–ω1t, which relates the probability of extinction by time t, P0(t, to two constants: c1 describes the probability of a newly founded population to reach the established phase, whereas ω1 describes the population’s probability of extinction per short time interval once established. Results For illustration, we applied the method to a previously developed stochastic population model of the endangered African wild dog (Lycaon pictus. A newly founded population reaches the established phase if the intercept of the (extrapolated linear parts of the “Wissel plot” with the y-axis, which is –ln(c1, is negative. For wild dogs in our model, this is the case if a critical initial number of four packs, consisting of eight individuals each, are released. Conclusions The method we present to quantify the establishment probability of newly founded populations is generic and inferences thus are transferable to other systems across the field of conservation biology. In contrast to other methods, our approach disaggregates the components of a population’s viability by distinguishing establishment from persistence.

Development of a fully automated software system for rapid analysis/processing of the falling weight deflectometer data.

Science.gov (United States)

2009-02-01

The Office of Special Investigations at Iowa Department of Transportation (DOT) collects FWD data on regular basis to evaluate pavement structural conditions. The primary objective of this study was to develop a fully-automated software system for ra...

The effect of ultrasound on arterial blood flow: 1. Steady fully developed flow

International Nuclear Information System (INIS)

Bestman, A.R.

1990-12-01

The paper models the effects of ultrasound heating of the tissues and the resultant perturbation on blood flow in the arteries and veins. It is assumed that the blood vessel is rigid and the undisturbed flow is fully developed. Acoustical perturbation on this Poiseuille flow, for the general three-dimensional flow with heat transfer in an infinitely long pipe is considered. Closed form analytical solutions are obtained to the problem. It is discovered that the effects of the ultrasound heating are concentrated at the walls of the blood vessels. (author). 4 refs

A technique for sexing fully developed embryos and early-instar larvae of the gypsy moth

Science.gov (United States)

Gilbert Levesque

1963-01-01

Because variation in sex ratio is an important factor in the population dynamics of the gypsy moth (Porthetria dispar), it is necessary to have some means of determining the ratio of males to females in a population at the beginning of the larval period as well as in the later stages. For determining the sex of fully developed embryos and early-...

The effectiveness of newly developed written asthma action plan in improvement of asthma outcome in children.

Science.gov (United States)

Lakupoch, Kingthong; Manuyakorn, Wiparat; Preutthipan, Aroonwan; Kamalaporn, Harutai

2017-09-17

Providing asthma education about controller medication use and appropriate management of asthma exacerbation are the keys to improving the disease outcome. Many asthma guidelines recommend that physicians provide written asthma action plan (WAAP) to all of their asthmatic patients. However, the benefit of WAAP is unclear. Thus, we have created a new WAAP which is simplified in Thai and more user friendly. To determine the effectiveness of the newly developed asthma action plan in management of children with asthma. Asthmatic children who meet inclusion criteria all received the WAAP and they were followed up for 6 months with measurement of outcome variables, such as asthma exacerbation that required emergency room visit, unscheduled OPD visit, admission and school absence in order to compare with the past 6 months before receiving the WAAP. The analyzed outcomes of forty-nine children show significantly reduced emergency room visit (P-value 0.005), unscheduled OPD visit (P-value 0.046), admission days (P-value 0.026) and school absence days (P-value 0.022). Well controlled group and mild severity group were not the factors that contribute to decreased emergency room visit but step up therapy may be the co-factor to decreased ER visit. The results of this study suggest that the provision of newly developed WAAP is useful for improving self-care of asthma patients and reducing asthma exacerbation.

Development and application of a fully implicit fluid dynamics code for multiphase flow

International Nuclear Information System (INIS)

Morii, Tadashi; Ogawa, Yumi

1996-01-01

Multiphase flow frequently occurs in a progression of accidents of nuclear reactor severe core damage. The CHAMPAGNE code has been developed to analyze thermohydraulic behavior of multiphase and multicomponent fluid, which requires for its characterization more than one set of velocities, temperatures, masses per unit volume, and so forth at each location in the calculation domain. Calculations of multiphase flow often show physical and numerical instability. The effect of numerical stabilization obtained by the upwind differencing and the fully implicit techniques gives one a convergent solution more easily than other techniques. Several results calculated by the CHAMPAGNE code are explained

Conventional and improved cytotoxicity test methods of newly developed biodegradable magnesium alloys

Science.gov (United States)

Han, Hyung-Seop; Kim, Hee-Kyoung; Kim, Yu-Chan; Seok, Hyun-Kwang; Kim, Young-Yul

2015-11-01

Unique biodegradable property of magnesium has spawned countless studies to develop ideal biodegradable orthopedic implant materials in the last decade. However, due to the rapid pH change and extensive amount of hydrogen gas generated during biocorrosion, it is extremely difficult to determine the accurate cytotoxicity of newly developed magnesium alloys using the existing methods. Herein, we report a new method to accurately determine the cytotoxicity of magnesium alloys with varying corrosion rate while taking in-vivo condition into the consideration. For conventional method, extract quantities of each metal ion were determined using ICP-MS and the result showed that the cytotoxicity due to pH change caused by corrosion affected the cell viability rather than the intrinsic cytotoxicity of magnesium alloy. In physiological environment, pH is regulated and adjusted within normal pH (˜7.4) range by homeostasis. Two new methods using pH buffered extracts were proposed and performed to show that environmental buffering effect of pH, dilution of the extract, and the regulation of eluate surface area must be taken into consideration for accurate cytotoxicity measurement of biodegradable magnesium alloys.

Evaluation of Shielding Performance for Newly Developed Composite Materials

Science.gov (United States)

Evans, Beren Richard

This work details an investigation into the contributing factors behind the success of newly developed composite neutron shield materials. Monte Carlo simulation methods were utilized to assess the neutron shielding capabilities and secondary radiation production characteristics of aluminum boron carbide, tungsten boron carbide, bismuth borosilicate glass, and Metathene within various neutron energy spectra. Shielding performance and secondary radiation data suggested that tungsten boron carbide was the most effective composite material. An analysis of the macroscopic cross-section contributions from constituent materials and interaction mechanisms was then performed in an attempt to determine the reasons for tungsten boron carbide's success over the other investigated materials. This analysis determined that there was a positive correlation between a non-elastic interaction contribution towards a material's total cross-section and shielding performance within the thermal and epi-thermal energy regimes. This finding was assumed to be a result of the boron-10 absorption reaction. The analysis also determined that within the faster energy regions, materials featuring higher non-elastic interaction contributions were comparable to those exhibiting primarily elastic scattering via low Z elements. This allowed for the conclusion that composite shield success within higher energy neutron spectra does not necessitate the use elastic scattering via low Z elements. These findings suggest that the inclusion of materials featuring high thermal absorption properties is more critical to composite neutron shield performance than the presence of constituent materials more inclined to maximize elastic scattering energy loss.

Fully developed laminar flow of two immiscible liquids through horizontal pipes: a variational approach

Energy Technology Data Exchange (ETDEWEB)

Kurban, Adib Paulo Abdalla [PETROBRAS, Rio de Janeiro (Brazil). Centro de Pesquisas; Bannwart, Antonio Carlos [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica

1990-12-31

The fully developed laminar flow of two immiscible liquids with both different viscosities and densities through a horizontal round pipe is studied. The interface between the fluids as well as their flow fields are determined by the use of a variational principle: the so called viscous dissipation principle: The results foreseen by this paper are in agreement with the physical observation (e.g. Southern and Ballman) that the more viscous fluid is total or partially encapsulated by the less viscous one. (author) 8 refs., 4 figs.

Fully developed laminar flow of two immiscible liquids through horizontal pipes: a variational approach

Energy Technology Data Exchange (ETDEWEB)

Kurban, Adib Paulo Abdalla [PETROBRAS, Rio de Janeiro (Brazil). Centro de Pesquisas; Bannwart, Antonio Carlos [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica

1991-12-31

The fully developed laminar flow of two immiscible liquids with both different viscosities and densities through a horizontal round pipe is studied. The interface between the fluids as well as their flow fields are determined by the use of a variational principle: the so called viscous dissipation principle: The results foreseen by this paper are in agreement with the physical observation (e.g. Southern and Ballman) that the more viscous fluid is total or partially encapsulated by the less viscous one. (author) 8 refs., 4 figs.

Combustion, performance and emissions characteristics of a newly ...

Indian Academy of Sciences (India)

of a newly developed CRDI single cylinder diesel engine. AVINASH ... In case of unit injector and unit pump systems, fuel injection pressure depends on ... nozzle hole diameters were effective in reducing smoke and PM emissions. However ...

Developing Fully Online Pre-Service Music and Arts Education Courses

Science.gov (United States)

Lierse, Sharon

2015-01-01

Charles Darwin University (CDU) offers education courses for students who want to teach in Australian schools. The university is unique due to its geographic location, proximity to Asia and its high Indigenous population compared to the rest of the country. Many courses are offered fully online including music education for pre-service teachers.…

The use of newly developed real-time PCR for the rapid identification of bacteria in culture-negative osteomyelitis.

Science.gov (United States)

Kobayashi, Naomi; Bauer, Thomas W; Sakai, Hiroshige; Togawa, Daisuke; Lieberman, Isador H; Fujishiro, Takaaki; Procop, Gary W

2006-12-01

We report a case of a culture-negative osteomyelitis in which our newly developed real-time polymerase chain reaction (PCR) could differentiate Staphylococcus aureus from Staphylococcus epidermidis. This is the first report that described the application of this novel assay to an orthopedics clinical sample. This assay may be useful for other clinical culture-negative cases in a combination with a broad-spectrum assay as a rapid microorganism identification method.

Perceptions of the clinical competence of newly registered nurses in the North West province

Directory of Open Access Journals (Sweden)

M.R. Moeti

2004-09-01

Full Text Available The clinical competence of newly registered nurses relating to the care of individual Clients, depends on their ability to correlate theoretical knowledge learned in the classroom with practice and the development of clinical skills. Its foundation lies in the ability to identify and solve problems that emanate from critical thinking, analytical reasoning and reflective practice. It is clear that the quality of clinical exposure plays a leading role in the development of nursing professionals. Nursing skills alone cannot ensure quality care of clients without the application of theory. Facilitation of this theory to practice therefore remains an essential component of nursing education. This study was aimed at identifying areas of incompetence of newly registered nurses (1998- 2001 in the clinical area by determining the newly registered nurses1 and professional nurses1 perceptions of the competence of the newly registered nurses. A quantitative, non-experimental, descriptive survey was used to collect the data regarding the clinical competence of newly registered nurses (1998-2001.

Osborne Reynolds pipe flow: Direct simulation from laminar through gradual transition to fully developed turbulence.

Science.gov (United States)

Wu, Xiaohua; Moin, Parviz; Adrian, Ronald J; Baltzer, Jon R

2015-06-30

The precise dynamics of breakdown in pipe transition is a century-old unresolved problem in fluid mechanics. We demonstrate that the abruptness and mysteriousness attributed to the Osborne Reynolds pipe transition can be partially resolved with a spatially developing direct simulation that carries weakly but finitely perturbed laminar inflow through gradual rather than abrupt transition arriving at the fully developed turbulent state. Our results with this approach show during transition the energy norms of such inlet perturbations grow exponentially rather than algebraically with axial distance. When inlet disturbance is located in the core region, helical vortex filaments evolve into large-scale reverse hairpin vortices. The interaction of these reverse hairpins among themselves or with the near-wall flow when they descend to the surface from the core produces small-scale hairpin packets, which leads to breakdown. When inlet disturbance is near the wall, certain quasi-spanwise structure is stretched into a Lambda vortex, and develops into a large-scale hairpin vortex. Small-scale hairpin packets emerge near the tip region of the large-scale hairpin vortex, and subsequently grow into a turbulent spot, which is itself a local concentration of small-scale hairpin vortices. This vortex dynamics is broadly analogous to that in the boundary layer bypass transition and in the secondary instability and breakdown stage of natural transition, suggesting the possibility of a partial unification. Under parabolic base flow the friction factor overshoots Moody's correlation. Plug base flow requires stronger inlet disturbance for transition. Accuracy of the results is demonstrated by comparing with analytical solutions before breakdown, and with fully developed turbulence measurements after the completion of transition.

Measurement equivalence of the newly developed Quality of Life in Childhood Epilepsy Questionnaire (QOLCE-55).

Science.gov (United States)

Ferro, Mark A; Goodwin, Shane W; Sabaz, Mark; Speechley, Kathy N

2016-03-01

The aim of this study was to examine measurement equivalence of the newly developed Quality of Life in Childhood Epilepsy Questionnaire (QOLCE-55) across age, sex, and time in a representative sample of children with newly diagnosed epilepsy. Data come from 373 children enrolled in the Health-related Quality of Life in Children with Epilepsy Study (HERQULES), a multisite prospective cohort study. Measurement equivalence was examined using a multiple-group confirmatory factor analysis framework, whereby increasingly stringent parameter constraints are imposed on the model. Comparison groups were stratified based on age (4-7 years vs. 8-12 years), sex (male vs. female), and time (measurement of health-related quality of life at diagnosis vs. 24 months later). The QOLCE-55 demonstrated measurement equivalence at the level of strict invariance for each model tested--age: χ(2) (3,123) = 4,097.3, p QOLCE-55 are perceived similarly among groups stratified by age, sex, and time and provide further evidence supporting the validity of the scale in children with epilepsy. Health professionals and researchers should be confident that group comparisons made using the QOLCE-55 are unbiased and that any group differences detected are meaningful; that is, not related to differences in the interpretation of items by informants. Future research replicating these findings is encouraged. Wiley Periodicals, Inc. © 2016 International League Against Epilepsy.

Practicing on Newly Dead

Directory of Open Access Journals (Sweden)

Jewel Abraham

2015-07-01

Full Text Available A newly dead cadaver simulation is practiced on the physical remains of the dead before the onset of rigor mortis. This technique has potential benefits for providing real-life in-situ experience for novice providers in health care practices. Evolving ethical views in health care brings into question some of the ethical aspects associated with newly dead cadaver simulation in terms of justification for practice, autonomy, consent, and the need of disclosure. A clear statement of policies and procedures on newly dead cadaver simulation has yet to be implemented. Although there are benefits and disadvantages to an in-situ cadaver simulation, such practices should not be carried out in secrecy as there is no compelling evidence that suggests such training as imperative. Secrecy in these practices is a violation of honor code of nursing ethics. As health care providers, practitioners are obliged to be ethically honest and trustworthy to their patients. The author explores the ethical aspects of using newly dead cadaver simulation in training novice nursing providers to gain competency in various lifesaving skills, which otherwise cannot be practiced on a living individual. The author explores multiple views on cadaver simulation in relation to ethical theories and practices such as consent and disclosure to family.

Newly qualified teachers´ possibilities to get foothold in a lifelong career course

DEFF Research Database (Denmark)

Krøjgaard, Frede; Frederiksen, Lisbeth Angela Lunde

Keyword: Induction program, newly qualified teachers, NQT, retention, professional development In Contrary to many other countries in Europe Denmark does not have any kind of national program regarding teacher induction program (TIP) or support in general to newly qualified teachers what so ever...

The practical skills of newly qualified nurses.

Science.gov (United States)

Danbjørg, Dorthe Boe; Birkelund, Regner

2011-02-01

This paper reports the findings from a study of newly qualified nurses and which subjects the nurses regarded as the most important in order to be able to live up to the requirements of clinical practice, and how they experience their potential for developing practical and moral skills, after the decrease in practical training. A qualitative approach guided the research process and the analysis of the data. The data was collected by participant observation and qualitative interviews with four nurses as informants. The conclusions made in this study are based on the statements and the observations of the newly qualified nurses. Our findings are discussed in relation to the Aristotelian concept and other relevant literature. The main message is that the newly qualified nurses did not feel equipped when they finished their training. This could be interpreted as a direct consequence of the decrease in practical training. Our study also underlines that the way nursing theory is perceived and taught is problematic. The interviews revealed that the nurses think that nursing theories should be applied directly in practice. This misunderstanding is probably also applicable to the teachers of the theories. Copyright © 2010 Elsevier Ltd. All rights reserved.

Comparison of newly developed anti-bone morphogenetic protein 4 llama-derived antibodies with commercially available BMP4 inhibitors.

Science.gov (United States)

Calpe, Silvia; Correia, Ana C P; Sancho-Serra, Maria Del Carmen; Krishnadath, Kausilia K

2016-01-01

Due to improved understanding of the role of bone morphogenetic protein 4 (BMP4) in an increasing number of diseases, the development of selective inhibitors of BMP4 is an attractive therapeutic option. The currently available BMP4 inhibitors are not suitable as therapeutics because of their low specificity and low effectiveness. Here, we compared newly generated anti-BMP4 llama-derived antibodies (VHHs) with 3 different types of commercially available BMP4 inhibitors, natural antagonists, small molecule BMPR inhibitors and conventional anti-BMP4 monoclonal antibodies. We found that the anti-BMP4 VHHs were as effective as the natural antagonist or small molecule inhibitors, but had higher specificity. We also showed that commercial anti-BMP4 antibodies were inferior in terms of both specificity and effectiveness. These findings might result from the fact that the VHHs C4C4 and C8C8 target a small region within the BMPR1 epitope of BMP4, whereas the commercial antibodies target other areas of the BMP4 molecule. Our results show that the newly developed anti-BMP4 VHHs are promising antibodies with better specificity and effectivity for inhibition of BMP4, making them an attractive tool for research and for therapeutic applications.

Rainwater drained through fully filled pipes

Energy Technology Data Exchange (ETDEWEB)

Kuhn, B; Koestel, P

1989-02-01

The conventional rainwater drainage system according to DIN 1986 always seems to be a point of problemacy in the building services as far as the occupancy of installation shafts and ducts is at stake. The excavation work and the necessary gravity lines are considered to be expensive. The consideration of the necessary slope complicates the installation additionally. Basing on those considerations, the raindraining system with fully filled pipes has been developed. DIN 1986, edition June 1988, part 1, point 6.1.1 allows to install rainwater pipes operated as planned, fully filled without slope. An enterprise specialised in building services investigated all system laws because only by a hydraulically exact balance, the function of the rainwater drainage system operated by negative and positive pressure can be insured. The results of those investigations are integrated in a computer program developed for this purpose.

Development of Fully Automated Low-Cost Immunoassay System for Research Applications.

Science.gov (United States)

Wang, Guochun; Das, Champak; Ledden, Bradley; Sun, Qian; Nguyen, Chien

2017-10-01

Enzyme-linked immunosorbent assay (ELISA) automation for routine operation in a small research environment would be very attractive. A portable fully automated low-cost immunoassay system was designed, developed, and evaluated with several protein analytes. It features disposable capillary columns as the reaction sites and uses real-time calibration for improved accuracy. It reduces the overall assay time to less than 75 min with the ability of easy adaptation of new testing targets. The running cost is extremely low due to the nature of automation, as well as reduced material requirements. Details about system configuration, components selection, disposable fabrication, system assembly, and operation are reported. The performance of the system was initially established with a rabbit immunoglobulin G (IgG) assay, and an example of assay adaptation with an interleukin 6 (IL6) assay is shown. This system is ideal for research use, but could work for broader testing applications with further optimization.

Development of a framework for identification of political environmental issues faced by multinational hotel chains in newly industrialized countries in Asia

OpenAIRE

Kim, Chol Yong

1992-01-01

The primary/objective of this study was to develop a framework for identification of political environmental issues faced by multinational hotel chains in newly industrialized countries in Asia. To accomplish the objective, key factors having an impact upon these hotel chains were identified using the Delphi Technique.

Development of Low Energy Gap and Fully Regioregular Polythienylenevinylene Derivative

Directory of Open Access Journals (Sweden)

Tanya M. S. David

2014-01-01

Full Text Available Low energy gap and fully regioregular conjugated polymers find its wide use in solar energy conversion applications. This paper will first briefly review this type of polymers and also report synthesis and characterization of a specific example new polymer, a low energy gap, fully regioregular, terminal functionalized, and processable conjugated polymer poly-(3-dodecyloxy-2,5-thienylene vinylene or PDDTV. The polymer exhibited an optical energy gap of 1.46 eV based on the UV-vis-NIR absorption spectrum. The electrochemically measured highest occupied molecular orbital (HOMO level is −4.79 eV, resulting in the lowest unoccupied molecular orbital (LUMO level of −3.33 eV based on optical energy gap. The polymer was synthesized via Horner-Emmons condensation and is fairly soluble in common organic solvents such as tetrahydrofuran and chloroform with gentle heating. DSC showed two endothermic peaks at 67°C and 227°C that can be attributed to transitions between crystalline and liquid states. The polymer is thermally stable up to about 300°C. This polymer appears very promising for cost-effective solar cell applications.

Newly graduated nurses' use of knowledge sources

DEFF Research Database (Denmark)

Voldbjerg, Siri Lygum; Grønkjaer, Mette; Sørensen, Erik Elgaard

2016-01-01

AIM: To advance evidence on newly graduated nurses' use of knowledge sources. BACKGROUND: Clinical decisions need to be evidence-based and understanding the knowledge sources that newly graduated nurses use will inform both education and practice. Qualitative studies on newly graduated nurses' use...... underscoring progression in knowledge use and perception of competence and confidence among newly graduated nurses. CONCLUSION: The transition phase, feeling of confidence and ability to use critical thinking and reflection, has a great impact on knowledge sources incorporated in clinical decisions....... The synthesis accentuates that for use of newly graduated nurses' qualifications and skills in evidence-based practice, clinical practice needs to provide a supportive environment which nurtures critical thinking and questions and articulates use of multiple knowledge sources....

Being a team leader: newly registered nurses relate their experiences.

Science.gov (United States)

Ekström, Louise; Idvall, Ewa

2015-01-01

This paper presents a study that explores how newly qualified registered nurses experience their leadership role in the ward-based nursing care team. A nurse's clinical leadership affects the quality of care provided. Newly qualified nurses experience difficulties during the transition period from student to qualified professional and find it challenging to lead nursing care. Twelve nurses were interviewed and the transcribed texts analysed using qualitative content analysis to assess both manifest and latent content. Five themes were identified: feeling stranded; forming well-functioning teams; learning to lead; having the courage, strength, and desire to lead; and ensuring appropriate care. The findings indicate that many factors limit nurses' leadership but some circumstances are supportive. The leadership prerequisites for newly registered nurses need to improve, emphasizing different ways to create a supportive atmosphere that promotes professional development and job satisfaction. To increase nurse retention and promote quality of care, nurse managers need to clarify expectations and guide and support newly qualified nurses in a planned way. © 2013 John Wiley & Sons Ltd.

Numerical solution of fully developed heat transfer problem with constant wall temperature and application to isosceles triangle and parabolic ducts

International Nuclear Information System (INIS)

Karabulut, Halit; Ipci, Duygu; Cinar, Can

2016-01-01

Highlights: • A numerical method has been developed for fully developed flows with constant wall temperature. • The governing equations were transformed to boundary fitted coordinates. • The Nusselt number of parabolic duct has been investigated. • Validation of the numerical method has been made by comparing published data. - Abstract: In motor-vehicles the use of more compact radiators have several advantages such as; improving the aerodynamic form of cars, reducing the weight and volume of the cars, reducing the material consumption and environmental pollutions, and enabling faster increase of the engine coolant temperature after starting to run and thereby improving the thermal efficiency. For the design of efficient and compact radiators, the robust determination of the heat transfer coefficient becomes imperative. In this study the external heat transfer coefficient of the radiator has been investigated for hydrodynamically and thermally fully developed flows in channels with constant wall temperature. In such situation the numerical treatment of the problem results in a trivial solution. To find a non-trivial solution the problem is treated either as an eigenvalue problem or as a thermally developing flow problem. In this study a numerical solution procedure has been developed and the heat transfer coefficients of the fully developed flow in triangular and parabolic air channels were investigated. The governing equations were transformed to boundary fitted coordinates and numerically solved. The non-trivial solution was obtained by means of guessing the temperature of any grid point within the solution domain. The correction of the guessed temperature was performed via smoothing the temperature profile on a line passing through the mentioned grid point. Results were compared with literature data and found to be consistent.

Fully portable blood irradiator

International Nuclear Information System (INIS)

Hungate, F.P.; Riemath, W.F.; Bunnell, L.R.

1980-01-01

A fully portable blood irradiator was developed using the beta emitter thulium-170 as the radiation source and vitreous carbon as the body of the irradiator, matrix for isotope encapsulation, and blood interface material. These units were placed in exteriorized arteriovenous shunts in goats, sheep, and dogs and the effects on circulating lymphocytes and on skin allograft retention times measured. The present work extends these studies by establishing baseline data for skin graft rejection times in untreated animals

Reliability of fully automated versus visually controlled pre- and post-processing of resting-state EEG.

Science.gov (United States)

Hatz, F; Hardmeier, M; Bousleiman, H; Rüegg, S; Schindler, C; Fuhr, P

2015-02-01

To compare the reliability of a newly developed Matlab® toolbox for the fully automated, pre- and post-processing of resting state EEG (automated analysis, AA) with the reliability of analysis involving visually controlled pre- and post-processing (VA). 34 healthy volunteers (age: median 38.2 (20-49), 82% female) had three consecutive 256-channel resting-state EEG at one year intervals. Results of frequency analysis of AA and VA were compared with Pearson correlation coefficients, and reliability over time was assessed with intraclass correlation coefficients (ICC). Mean correlation coefficient between AA and VA was 0.94±0.07, mean ICC for AA 0.83±0.05 and for VA 0.84±0.07. AA and VA yield very similar results for spectral EEG analysis and are equally reliable. AA is less time-consuming, completely standardized, and independent of raters and their training. Automated processing of EEG facilitates workflow in quantitative EEG analysis. Copyright © 2014 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Development of ODL in a Newly Industrialized Country according to Face-to-Face Contact, ICT, and E-Readiness

Directory of Open Access Journals (Sweden)

J. Marinda van Zyl

2013-03-01

Full Text Available A large number of unqualified and under-qualified in-service teachers are holding back socio-economical development in South Africa, a newly industrialized country. Open and distance learning (ODL provides an innovative strategy and praxis for developing and newly industrialized countries to reach their educational and socio-economical objectives through professional development and training. In order to examine factors which affect the success of ODL offered by the North-West University in South Africa, a qualitative and quantitative research approach is used. Factors examined include face-to-face classroom contact, the implementation and use of ICTs, and e-readiness. The relationships between these factors are also discussed. A questionnaire was administered to 87 teacher-students in four Advanced Certificate in Education (ACE programs to collect quantitative data regarding aspects of their classes and the e-readiness of students. This data was qualitatively elaborated upon by three semi-structured, open-ended focus-group interviews. Besides descriptive statistics, Spearman’s rank-order correlations (r were determined between variables pertaining to negative feelings towards face-to-face classroom contact, ODL as students’ choice of delivery mode, and students’ positive attitude towards information and communication technology (ICT. Combined quantitative and qualitative findings were used to evaluate the effectiveness of contact classes as well as the e-readiness of students towards the attainment of ODL development Phase D. This phase refers to UNESCO’s description of ICT implementation, integration, and use. Relationships (Spearman’s rank-order correlations between ODL, as teacher-students’ choice of educational delivery mode, and aspects of their e-readiness suggest that the e-readiness of teacher-students is implicit to their choice of ODL as educational delivery mode for professional development.

DNS of fully developed turbulent heat transfer of a viscoelastic drag-reducing flow

Energy Technology Data Exchange (ETDEWEB)

Yu, Bo [Department of Oil and Gas Storage and Transportation Engineering, China University of Petroleum, Beijing 102249 (China); Kawaguchi, Yasuo [Department of Mechanical Engineering, Faculty of Science and Technology, Tokyo University of Science, 2641 Yamazaki, Noda, Chiba 278-8510 (Japan)

2005-10-01

A direct numerical simulation (DNS) of turbulent heat transfer in a channel flow with a Giesekus model was carried out to investigate turbulent heat transfer mechanism of a viscoelastic drag-reducing flow by additives. The configuration was a fully-developed turbulent channel flow with uniform heat flux imposed on both the walls. The temperature was considered as a passive scalar with the effect of buoyancy force neglected. The Reynolds number based on the friction velocity and half the channel height was 150. Statistical quantities such as root-mean-square temperature fluctuations, turbulent heat fluxes and turbulent Prandtl number were obtained and compared with those of a Newtonian fluid flow. Budget terms of the temperature variance and turbulent heat fluxes were also presented. (author)

Designing a fully automated multi-bioreactor plant for fast DoE optimization of pharmaceutical protein production.

Science.gov (United States)

Fricke, Jens; Pohlmann, Kristof; Jonescheit, Nils A; Ellert, Andree; Joksch, Burkhard; Luttmann, Reiner

2013-06-01

The identification of optimal expression conditions for state-of-the-art production of pharmaceutical proteins is a very time-consuming and expensive process. In this report a method for rapid and reproducible optimization of protein expression in an in-house designed small-scale BIOSTAT® multi-bioreactor plant is described. A newly developed BioPAT® MFCS/win Design of Experiments (DoE) module (Sartorius Stedim Systems, Germany) connects the process control system MFCS/win and the DoE software MODDE® (Umetrics AB, Sweden) and enables therefore the implementation of fully automated optimization procedures. As a proof of concept, a commercial Pichia pastoris strain KM71H has been transformed for the expression of potential malaria vaccines. This approach has allowed a doubling of intact protein secretion productivity due to the DoE optimization procedure compared to initial cultivation results. In a next step, robustness regarding the sensitivity to process parameter variability has been proven around the determined optimum. Thereby, a pharmaceutical production process that is significantly improved within seven 24-hour cultivation cycles was established. Specifically, regarding the regulatory demands pointed out in the process analytical technology (PAT) initiative of the United States Food and Drug Administration (FDA), the combination of a highly instrumented, fully automated multi-bioreactor platform with proper cultivation strategies and extended DoE software solutions opens up promising benefits and opportunities for pharmaceutical protein production. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Erosion of newly developed CFCs and Be under disruption heat loads

Science.gov (United States)

Nakamura, K.; Akiba, M.; Araki, M.; Dairaku, M.; Sato, K.; Suzuki, S.; Yokoyama, K.; Linke, J.; Duwe, R.; Bolt, H.; Roedig, M.

1996-10-01

An evaluation of the erosion under disruption heat loads is very important to the lifetime prediction of divertor armour tiles of next fusion devices such as ITER. In particular, erosion data on CFCs (carbon fiber reinforced composites) and beryllium (Be) as the armour materials is urgently required in the ITER design. For CFCs, high heat flux experiments on the newly developed CFCs with high thermal conductivity have been performed under the heat flux of around 800-2000 MW/m 2 and the pulse length of 2-5 ms in JAERI electron beam irradiation systems (JEBIS). As a result, the weight losses of B 4C doped CFCs after heating were almost same to those of the non doped CFC up to 5 wt% boron content. For Be, we have carried out our first disruption experiments on S65/C grade Be specimens in the Juelich divertor test facility in hot cells (JUDITH) facility as a frame work of the J—EU collaboration. The heating conditions were heat loads of 1250-5000 MW/m 2 for 2-8 ms, and the heated area was 3 × 3 mm 2. As a result, the protuberances of the heated area of Be were observed under the lower heat flux.

Erosion of newly developed CFCs and Be under disruption heat loads

International Nuclear Information System (INIS)

Nakamura, K.; Duwe, R.; Bolt, H.; Roedig, M.

1996-01-01

An evaluation of the erosion under disruption heat loads is very important to the lifetime prediction of divertor armour tiles of next fusion devices such as ITER. In particular, erosion data on CFCs (carbon fiber reinforced composites) and beryllium (Be) as the armour materials is urgently required in the ITER design. For CFCs, high heat flux experiments on the newly developed CFCs with high thermal conductivity have been performed under the heat flux of around 800-2000 MW/m 2 and the pulse length of 2-5 ms in JAERI electron beam irradiation systems (JEBIS). As a result, the weight losses of B 4 C doped CFCs after heating were almost same to those of the non doped CFC up to 5 wt% boron content. For Be, we have carried out our first disruption experiments on S65/C grade Be specimens in the Juelich divertor test facility in hot cells (JUDITH) facility as a frame work of the J-EU collaboration. The heating conditions were heat loads of 1250-5000 MW/m 2 for 2-8 ms, and the heated area was 3 x 3 mm 2 . As a result, the protuberances of the heated area of Be were observed under the lower heat flux. (orig.)

Weldability aspects of a newly developed duplex stainless steel LDX 2101

Energy Technology Data Exchange (ETDEWEB)

Westin, E.M. [Avesta Research Centre, Avesta (Sweden). Outokumpu Stainless; Brolund, B. [SSAB Tunnplat, Borlaenge (Sweden); Hertzman, S. [Outokumpu Stainless Research Foundation, Stockholm (Sweden)

2008-06-15

Duplex grades have, due to balanced chemical compositions of both filler and base metals, a weldability that allows for successful welding using a majority of the technically relevant techniques of today. In order to fulfil the performance requirements several aspects must be considered. In the heat affected zone (HAZ) the austenite reformation must be reasonably high and in the weld metal the microstructure must be stable so that e.g. high productivity welding and multi-pass welding are possible, without precipitation of detrimental phases in previous passes. This paper addresses the effect of alloying elements and thermal cycles on phase balance in the high temperature HAZ (HTHAZ) of the newly developed lean duplex grade LDX 2101 (EN 1.4162, UNS S32101). Bead-on-plate welds and simulated weld structures have been produced and investigated using metallography, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results are analysed using the thermodynamic database Thermo-Calc and a model for phase transformation based on a paraequilibrium assumption for ferrite-austenite transformation. In the temperature region outside the paraequilibrium domain, growth controlled by diffusion of substitutional elements was considered. The analysis follows a model by Cahn regarding grain boundary nucleated growth and the Hillert-Engberg model on kinetics of spherical and planar growth. (orig.)

Fully CMOS-compatible titanium nitride nanoantennas

Energy Technology Data Exchange (ETDEWEB)

Briggs, Justin A., E-mail: jabriggs@stanford.edu [Department of Applied Physics, Stanford University, 348 Via Pueblo Mall, Stanford, California 94305 (United States); Department of Materials Science and Engineering, Stanford University, 496 Lomita Mall, Stanford, California 94305 (United States); Naik, Gururaj V.; Baum, Brian K.; Dionne, Jennifer A. [Department of Materials Science and Engineering, Stanford University, 496 Lomita Mall, Stanford, California 94305 (United States); Petach, Trevor A.; Goldhaber-Gordon, David [Department of Physics, Stanford University, 382 Via Pueblo Mall, Stanford, California 94305 (United States)

2016-02-01

CMOS-compatible fabrication of plasmonic materials and devices will accelerate the development of integrated nanophotonics for information processing applications. Using low-temperature plasma-enhanced atomic layer deposition (PEALD), we develop a recipe for fully CMOS-compatible titanium nitride (TiN) that is plasmonic in the visible and near infrared. Films are grown on silicon, silicon dioxide, and epitaxially on magnesium oxide substrates. By optimizing the plasma exposure per growth cycle during PEALD, carbon and oxygen contamination are reduced, lowering undesirable loss. We use electron beam lithography to pattern TiN nanopillars with varying diameters on silicon in large-area arrays. In the first reported single-particle measurements on plasmonic TiN, we demonstrate size-tunable darkfield scattering spectroscopy in the visible and near infrared regimes. The optical properties of this CMOS-compatible material, combined with its high melting temperature and mechanical durability, comprise a step towards fully CMOS-integrated nanophotonic information processing.

NUMERICAL MODELLING OF THE SOIL BEHAVIOUR BY USING NEWLY DEVELOPED ADVANCED MATERIAL MODEL

Directory of Open Access Journals (Sweden)

Jan Veselý

2017-02-01

Full Text Available This paper describes a theoretical background, implementation and validation of the newly developed Jardine plastic hardening-softening model (JPHS model, which can be used for numerical modelling of the soils behaviour. Although the JPHS model is based on the elasto-plastic theory, like the Mohr-Coulomb model that is widely used in geotechnics, it contains some improvements, which removes the main disadvantages of the MC model. The presented model is coupled with an isotopically hardening and softening law, non-linear elastic stress-strain law, non-associated elasto-plastic material description and a cap yield surface. The validation of the model is done by comparing the numerical results with real measured data from the laboratory tests and by testing of the model on the real project of the tunnel excavation. The 3D numerical analysis is performed and the comparison between the JPHS, Mohr-Coulomb, Modified Cam-Clay, Hardening small strain model and monitoring in-situ data is done.

Parsing multiple processes of high temperature impacts on corn/soybean yield using a newly developed CLM-APSIM modeling framework

Science.gov (United States)

Peng, B.; Guan, K.; Chen, M.

2016-12-01

Future agricultural production faces a grand challenge of higher temperature under climate change. There are multiple physiological or metabolic processes of how high temperature affects crop yield. Specifically, we consider the following major processes: (1) direct temperature effects on photosynthesis and respiration; (2) speed-up growth rate and the shortening of growing season; (3) heat stress during reproductive stage (flowering and grain-filling); (4) high-temperature induced increase of atmospheric water demands. In this work, we use a newly developed modeling framework (CLM-APSIM) to simulate the corn and soybean growth and explicitly parse the above four processes. By combining the strength of CLM in modeling surface biophysical (e.g., hydrology and energy balance) and biogeochemical (e.g., photosynthesis and carbon-nitrogen interactions), as well as that of APSIM in modeling crop phenology and reproductive stress, the newly developed CLM-APSIM modeling framework enables us to diagnose the impacts of high temperature stress through different processes at various crop phenology stages. Ground measurements from the advanced SoyFACE facility at University of Illinois is used here to calibrate, validate, and improve the CLM-APSIM modeling framework at the site level. We finally use the CLM-APSIM modeling framework to project crop yield for the whole US Corn Belt under different climate scenarios.

Use of newly developed standardized form for interpretation of high-resolution CT in screening for pneumoconiosis

International Nuclear Information System (INIS)

Julien, P.J.; Sider, L.; Silverman, J.M.; Dahlgren, J.; Harber, P.; Bunn, W.

1991-01-01

This paper reports that although the International Labour Office (ILO) standard for interpretation of the posteroanterior chest radiograph has been available for 10 years, there has been no attempt to standardize the high-resolution CT (HRTC) readings for screening of pneumoconiosis. An integrated respirator surveillance program for 87 workers exposed to inorganic dust was conducted. This program consisted of a detailed occupational exposure history, physical symptoms and signs, spirometry, chest radiography, and HRCT. Two groups of workers with known exposure were studied with HRCT. Group 1 had normal spirometry results and chest radiographs, and group 2 had abnormalities at spirometry or on chest radiographs. The HRCT scans were read independently of the clinical findings and chest radiographs. The HRCT scans were interpreted by using an ILO-based standard form developed by the authors for this project. With the newly developed HRCT form, individual descriptive abnormality localized severity, and overall rating systems have been developed and compared for inter- and intraobserver consistency

Verification of gamma knife based fractionated radiosurgery with newly developed head-thorax phantom

International Nuclear Information System (INIS)

Bisht, Raj Kishor; Kale, Shashank Sharad; Natanasabapathi, Gopishankar; Singh, Manmohan Jit; Agarwal, Deepak; Garg, Ajay; Rath, Goura Kishore; Julka, Pramod Kumar; Kumar, Pratik; Thulkar, Sanjay; Sharma, Bhawani Shankar

2016-01-01

Objective: Purpose of the study is to verify the Gamma Knife Extend™ system (ES) based fractionated stereotactic radiosurgery with newly developed head-thorax phantom. Methods: Phantoms are extensively used to measure radiation dose and verify treatment plan in radiotherapy. A human upper body shaped phantom with thorax was designed to simulate fractionated stereotactic radiosurgery using Extend™ system of Gamma Knife. The central component of the phantom aids in performing radiological precision test, dosimetric evaluation and treatment verification. A hollow right circular cylindrical space of diameter 7.0 cm was created at the centre of this component to place various dosimetric devices using suitable adaptors. The phantom is made of poly methyl methacrylate (PMMA), a transparent thermoplastic material. Two sets of disk assemblies were designed to place dosimetric films in (1) horizontal (xy) and (2) vertical (xz) planes. Specific cylindrical adaptors were designed to place thimble ionization chamber inside phantom for point dose recording along xz axis. EBT3 Gafchromic films were used to analyze and map radiation field. The focal precision test was performed using 4 mm collimator shot in phantom to check radiological accuracy of treatment. The phantom head position within the Extend™ frame was estimated using encoded aperture measurement of repositioning check tool (RCT). For treatment verification, the phantom with inserts for film and ion chamber was scanned in reference treatment position using X-ray computed tomography (CT) machine and acquired stereotactic images were transferred into Leksell Gammaplan (LGP). A patient treatment plan with hypo-fractionated regimen was delivered and identical fractions were compared using EBT3 films and in-house MATLAB codes. Results: RCT measurement showed an overall positional accuracy of 0.265 mm (range 0.223 mm–0.343 mm). Gamma index analysis across fractions exhibited close agreement between LGP and film

Clinical feasibility of a new through-the-scope fully covered esophageal self-expandable metallic stent: an in vivo animal study.

Science.gov (United States)

Cheon, Young Koog; Lee, Tae Yoon; Sung, In Kyung; Shim, Chan Sup

2014-01-01

Most delivery devices used for esophageal stents for obstructing esophageal cancer have a diameter of 5-8 mm, a size that is too large to pass through the endoscopic working channel. The conventional esophageal stent requires multiple endoscopic procedures for implantation. The purpose of the present study was to evaluate the clinical feasibility of a newly developed fully covered, self-expanding, through-the-scope (TTS) esophageal stent in a porcine model. Eight mini pigs were used. Each animal underwent placement of a fully covered TTS stent (Hanarostent® Esophagus TTS) and the upper part of the stent was fixed by suturing with nylon. Fluoroscopy was carried out every week to assess migration of the stent. Follow-up endoscopy was done every month for 3 months to evaluate the status of the membrane, stent mesh, grade of tissue hyperplasia, and mucosal changes at both ends of the stent. All stents were successfully and easily deployed, and were placed without any distortion in the stent or without rupture of the membrane. In two cases, stent migration was observed after 8 weeks. No case of membrane disruption, stent mesh disruption or tissue hyperplasia at either end of the stent was found at the completion of the study. Our findings indicate that the new fully covered self-expanding TTS esophageal stent is easy and simple to implant, and no significant distortion of mesh or disruption of membrane was observed. © 2013 The Authors. Digestive Endoscopy © 2013 Japan Gastroenterological Endoscopy Society.

Multipartite fully nonlocal quantum states

International Nuclear Information System (INIS)

Almeida, Mafalda L.; Cavalcanti, Daniel; Scarani, Valerio; Acin, Antonio

2010-01-01

We present a general method for characterizing the quantum correlations obtained after local measurements on multipartite systems. Sufficient conditions for a quantum system to be fully nonlocal according to a given partition, as well as being (genuinely) multipartite fully nonlocal, are derived. These conditions allow us to identify all completely connected graph states as multipartite fully nonlocal quantum states. Moreover, we show that this feature can also be observed in mixed states: the tensor product of five copies of the Smolin state, a biseparable and bound entangled state, is multipartite fully nonlocal.

PCTFPeval: a web tool for benchmarking newly developed algorithms for predicting cooperative transcription factor pairs in yeast.

Science.gov (United States)

Lai, Fu-Jou; Chang, Hong-Tsun; Wu, Wei-Sheng

2015-01-01

Computational identification of cooperative transcription factor (TF) pairs helps understand the combinatorial regulation of gene expression in eukaryotic cells. Many advanced algorithms have been proposed to predict cooperative TF pairs in yeast. However, it is still difficult to conduct a comprehensive and objective performance comparison of different algorithms because of lacking sufficient performance indices and adequate overall performance scores. To solve this problem, in our previous study (published in BMC Systems Biology 2014), we adopted/proposed eight performance indices and designed two overall performance scores to compare the performance of 14 existing algorithms for predicting cooperative TF pairs in yeast. Most importantly, our performance comparison framework can be applied to comprehensively and objectively evaluate the performance of a newly developed algorithm. However, to use our framework, researchers have to put a lot of effort to construct it first. To save researchers time and effort, here we develop a web tool to implement our performance comparison framework, featuring fast data processing, a comprehensive performance comparison and an easy-to-use web interface. The developed tool is called PCTFPeval (Predicted Cooperative TF Pair evaluator), written in PHP and Python programming languages. The friendly web interface allows users to input a list of predicted cooperative TF pairs from their algorithm and select (i) the compared algorithms among the 15 existing algorithms, (ii) the performance indices among the eight existing indices, and (iii) the overall performance scores from two possible choices. The comprehensive performance comparison results are then generated in tens of seconds and shown as both bar charts and tables. The original comparison results of each compared algorithm and each selected performance index can be downloaded as text files for further analyses. Allowing users to select eight existing performance indices and 15

Fully automated MRI-guided robotics for prostate brachytherapy

International Nuclear Information System (INIS)

Stoianovici, D.; Vigaru, B.; Petrisor, D.; Muntener, M.; Patriciu, A.; Song, D.

2008-01-01

The uncertainties encountered in the deployment of brachytherapy seeds are related to the commonly used ultrasound imager and the basic instrumentation used for the implant. An alternative solution is under development in which a fully automated robot is used to place the seeds according to the dosimetry plan under direct MRI-guidance. Incorporation of MRI-guidance creates potential for physiological and molecular image-guided therapies. Moreover, MRI-guided brachytherapy is also enabling for re-estimating dosimetry during the procedure, because with the MRI the seeds already implanted can be localised. An MRI compatible robot (MrBot) was developed. The robot is designed for transperineal percutaneous prostate interventions, and customised for fully automated MRI-guided brachytherapy. With different end-effectors, the robot applies to other image-guided interventions of the prostate. The robot is constructed of non-magnetic and dielectric materials and is electricity free using pneumatic actuation and optic sensing. A new motor (PneuStep) was purposely developed to set this robot in motion. The robot fits alongside the patient in closed-bore MRI scanners. It is able to stay fully operational during MR imaging without deteriorating the quality of the scan. In vitro, cadaver, and animal tests showed millimetre needle targeting accuracy, and very precise seed placement. The robot tested without any interference up to 7T. The robot is the first fully automated robot to function in MRI scanners. Its first application is MRI-guided seed brachytherapy. It is capable of automated, highly accurate needle placement. Extensive testing is in progress prior to clinical trials. Preliminary results show that the robot may become a useful image-guided intervention instrument. (author)

Numerical analysis of liquid metal MHD flows through circular pipes based on a fully developed modeling

International Nuclear Information System (INIS)

Zhang, Xiujie; Pan, Chuanjie; Xu, Zengyu

2013-01-01

Highlights: ► 2D MHD code based on a fully developed modeling is developed and validated by Samad analytical results. ► The results of MHD effect of liquid metal through circular pipes at high Hartmann numbers are given. ► M type velocity profile is observed for MHD circular pipe flow at high wall conductance ratio condition. ► Non-uniform wall electrical conductivity leads to high jet velocity in Robert layers. -- Abstract: Magnetohydrodynamics (MHD) laminar flows through circular pipes are studied in this paper by numerical simulation under the conditions of Hartmann numbers from 18 to 10000. The code is developed based on a fully developed modeling and validated by Samad's analytical solution and Chang's asymptotic results. After the code validation, numerical simulation is extended to high Hartmann number for MHD circular pipe flows with conducting walls, and numerical results such as velocity distribution and MHD pressure gradient are obtained. Typical M-type velocity is observed but there is not such a big velocity jet as that of MHD rectangular duct flows even under the conditions of high Hartmann numbers and big wall conductance ratio. The over speed region in Robert layers becomes smaller when Hartmann numbers increase. When Hartmann number is fixed and wall conductance ratios change, the dimensionless velocity is through one point which is in agreement with Samad's results, the locus of maximum value of velocity jet is same and effects of wall conductance ratio only on the maximum value of velocity jet. In case of Robert walls are treated as insulating and Hartmann walls as conducting for circular pipe MHD flows, there is big velocity jet like as MHD rectangular duct flows of Hunt's case 2

Flagellation of Pseudomonas aeruginosa in newly divided cells

Science.gov (United States)

Zhao, Kun; Lee, Calvin; Anda, Jaime; Wong, Gerard

2015-03-01

For monotrichous bacteria, Pseudomonas aeruginosa, after cell division, one daughter cell inherits the old flagellum from its mother cell, and the other grows a new flagellum during or after cell division. It had been shown that the new flagellum grows at the distal pole of the dividing cell when the two daughter cells haven't completely separated. However, for those daughter cells who grow new flagella after division, it still remains unknown at which pole the new flagellum will grow. Here, by combining our newly developed bacteria family tree tracking techniques with genetic manipulation method, we showed that for the daughter cell who did not inherit the old flagellum, a new flagellum has about 90% chances to grow at the newly formed pole. We proposed a model for flagellation of P. aeruginosa.

Surface ultrastuctures of the human laryngeal mucosa - observation by an newly developed technique of SEM cinematography

International Nuclear Information System (INIS)

Ohyama, M.; Ohno, I.; Fujita, T.; Adachi, K.

1981-01-01

With the newly-developed techniques of SEM cinematography, surface ultrastructures of the human normal and pathological laryngeal mucosa were demonstrated. The high specialization of the laryngeal mucosa with its marked regional differences stresses the fact that even the squamous epithelium and nonciliated epithelium may play a role of utmost importance. All specimens were obtained after laryngectomy from 10 patients affected by laryngeal cancer which had been treated with or without preoperative irradiation of Lineac in total doses of 3,500-4,500 rad. Special attention was paid to the occurrence of microvilli and microplicae in the normal and pathological mucosa of the larynx, and their morphological and physiological significances were discussed briefly. (Auth.)

Transferability of Newly Developed Pear SSR Markers to Other Rosaceae Species.

Science.gov (United States)

Fan, L; Zhang, M-Y; Liu, Q-Z; Li, L-T; Song, Y; Wang, L-F; Zhang, S-L; Wu, J

2013-01-01

A set of 120 simple sequence repeats (SSRs) was developed from the newly assembled pear sequence and evaluated for polymorphisms in seven genotypes of pear from different genetic backgrounds. Of these, 67 (55.8 %) primer pairs produced polymorphic amplifications. Together, the 67 SSRs detected 277 alleles with an average of 4.13 per locus. Sequencing of the amplification products from randomly picked loci NAUPy31a and NAUpy53a verified the presence of the SSR loci. When the 67 primer pairs were tested on 96 individual members of eight species in the Rosaceae family, 61.2 % (41/67) of the tested SSRs successfully amplified a PCR product in at least one of the Rosaceae genera. The transferability from pear to different species varied from 58.2 % (apple) to 11.9 % (cherry). The ratio of transferability also reflected the closer relationships within Maloideae over Prunoideae. Two pear SSR markers, NAUpy43c and NAUpy55k, could distinguish the 20 different apple genotypes thoroughly, and UPGMA cluster analysis grouped them into three groups at the similarity level of 0.56. The high level of polymorphism and good transferability of pear SSRs to Rosaceae species indicate their promise for application to future molecular screening, map construction, and comparative genomic studies among pears and other Rosaceae species.

Revisiting the emissions-energy-trade nexus: evidence from the newly industrializing countries.

Science.gov (United States)

Ahmed, Khalid; Shahbaz, Muhammad; Kyophilavong, Phouphet

2016-04-01

This paper applies Pedroni's panel cointegration approach to explore the causal relationship between trade openness, carbon dioxide emissions, energy consumption, and economic growth for the panel of newly industrialized economies (i.e., Brazil, India, China, and South Africa) over the period of 1970-2013. Our panel cointegration estimation results found majority of the variables cointegrated and confirm the long-run association among the variables. The Granger causality test indicates bidirectional causality between carbon dioxide emissions and energy consumption. A unidirectional causality is found running from trade openness to carbon dioxide emission and energy consumption and economic growth to carbon dioxide emissions. The results of causality analysis suggest that the trade liberalization in newly industrialized economies induces higher energy consumption and carbon dioxide emissions. Furthermore, the causality results are checked using an innovative accounting approach which includes forecast-error variance decomposition test and impulse response function. The long-run coefficients are estimated using fully modified ordinary least square (FMOLS) method, and results conclude that the trade openness and economic growth reduce carbon dioxide emissions in the long run. The results of FMOLS test sound the existence of environmental Kuznets curve hypothesis. It means that trade liberalization induces carbon dioxide emission with increased national output, but it offsets that impact in the long run with reduced level of carbon dioxide emissions.

Effect of free-air nuclei on fully developed individual bubble cavitation

International Nuclear Information System (INIS)

Danel, F.; Lecoffre, Y.

1976-01-01

Fully developed individual-bubble cavitation was studied. Nuclei population and pressure distribution at the boundary of a cavitating converging-diverging test section were measured. It was shown that some cavitation tests can only yield valid results if the free air content of the water is known. During the initial stages of bubble growth the wall pressure in the cavitation region is lower than the vapor pressure. Wall pressure rises later. For a given cavitation number and flow velocity, the pressure distribution depends on the number of expanding bubbles on the hydrofoil. Minimum pressure coefficient depends only on the cavitation number, the flow velocity and the number of expanding bubbles present. Bubbles generate pressure pulses at the wall; combined effect of all such pulses is to shift the wall pressure away from the value that would be obtained at the same cavitation number if no cavitation was present. The greater the number of expanding bubbles, the more the wall pressure tends to approach the vapor pressure. An important result of the work is to pin-point free air contents of water tunnel which lead to correct scaling of cavitation flows [fr

Cross-Linking Mast Cell Specific Gangliosides Stimulates the Release of Newly Formed Lipid Mediators and Newly Synthesized Cytokines

Directory of Open Access Journals (Sweden)

Edismauro Garcia Freitas Filho

2016-01-01

Full Text Available Mast cells are immunoregulatory cells that participate in inflammatory processes. Cross-linking mast cell specific GD1b derived gangliosides by mAbAA4 results in partial activation of mast cells without the release of preformed mediators. The present study examines the release of newly formed and newly synthesized mediators following ganglioside cross-linking. Cross-linking the gangliosides with mAbAA4 released the newly formed lipid mediators, prostaglandins D2 and E2, without release of leukotrienes B4 and C4. The effect of cross-linking these gangliosides on the activation of enzymes in the arachidonate cascade was then investigated. Ganglioside cross-linking resulted in phosphorylation of cytosolic phospholipase A2 and increased expression of cyclooxygenase-2. Translocation of 5-lipoxygenase from the cytosol to the nucleus was not induced by ganglioside cross-linking. Cross-linking of GD1b derived gangliosides also resulted in the release of the newly synthesized mediators, interleukin-4, interleukin-6, and TNF-α. The effect of cross-linking the gangliosides on the MAP kinase pathway was then investigated. Cross-linking the gangliosides induced the phosphorylation of ERK1/2, JNK1/2, and p38 as well as activating both NFκB and NFAT in a Syk-dependent manner. Therefore, cross-linking the mast cell specific GD1b derived gangliosides results in the activation of signaling pathways that culminate with the release of newly formed and newly synthesized mediators.

Development and testing of a mobile application to support diabetes self-management for people with newly diagnosed type 2 diabetes: a design thinking case study.

Science.gov (United States)

Petersen, Mira; Hempler, Nana F

2017-06-26

Numerous mobile applications have been developed to support diabetes-self-management. However, the majority of these applications lack a theoretical foundation and the involvement of people with diabetes during development. The aim of this study was to develop and test a mobile application (app) supporting diabetes self-management among people with newly diagnosed type 2 diabetes using design thinking. The app was developed and tested in 2015 using a design-based research approach involving target users (individuals newly diagnosed with type 2 diabetes), research scientists, healthcare professionals, designers, and app developers. The research approach comprised three major phases: inspiration, ideation, and implementation. The first phase included observations of diabetes education and 12 in-depth interviews with users regarding challenges and needs related to living with diabetes. The ideation phrase consisted of four interactive workshops with users focusing on app needs, in which ideas were developed and prioritized. Finally, 14 users tested the app over 4 weeks; they were interviewed about usability and perceptions about the app as a support tool. A multifunctional app was useful for people with newly diagnosed type 2 diabetes. The final app comprised five major functions: overview of diabetes activities after diagnosis, recording of health data, reflection games and goal setting, knowledge games and recording of psychological data such as sleep, fatigue, and well-being. Users found the app to be a valuable tool for support, particularly for raising their awareness about their psychological health and for informing and guiding them through the healthcare system after diagnosis. The design thinking processes used in the development and implementation of the mobile health app were crucial to creating value for users. More attention should be paid to the training of professionals who introduce health apps. Danish Data Protection Agency: 2012-58-0004. Registered 6

Newly Homeless Youth Typically Return Home

OpenAIRE

Milburn, Norweeta G.; Rosenthal, Doreen; Rotheram-Borus, Mary Jane; Mallett, Shelley; Batterham, Philip; Rice, Eric; Solorio, Rosa

2007-01-01

165 newly homeless adolescents from Melbourne, Australia and 261 from Los Angeles, United States were surveyed and followed for two years. Most newly homeless adolescents returned home (70% U.S., 47% Australia) for significant amounts of time (39% U.S., 17% Australia more than 12 months) within two years of becoming homeless.

Prediction of gas volume fraction in fully-developed gas-liquid flow in a vertical pipe

International Nuclear Information System (INIS)

Islam, A.S.M.A.; Adoo, N.A.; Bergstrom, D.J.; Wang, D.F.

2015-01-01

An Eulerian-Eulerian two-fluid model has been implemented for the prediction of the gas volume fraction profile in turbulent upward gas-liquid flow in a vertical pipe. The two-fluid transport equations are discretized using the finite volume method and a low Reynolds number κ-ε turbulence model is used to predict the turbulence field for the liquid phase. The contribution to the effective turbulence by the gas phase is modeled by a bubble induced turbulent viscosity. For the fully-developed flow being considered, the gas volume fraction profile is calculated using the radial momentum balance for the bubble phase. The model potentially includes the effect of bubble size on the interphase forces and turbulence model. The results obtained are in good agreement with experimental data from the literature. The one-dimensional formulation being developed allows for the efficient assessment and further development of both turbulence and two-fluid models for multiphase flow applications in the nuclear industry. (author)

Prediction of gas volume fraction in fully-developed gas-liquid flow in a vertical pipe

Energy Technology Data Exchange (ETDEWEB)

Islam, A.S.M.A.; Adoo, N.A.; Bergstrom, D.J., E-mail: nana.adoo@usask.ca [University of Saskatchewan, Department of Mechanical Engineering, Saskatoon, SK (Canada); Wang, D.F. [Canadian Nuclear Laboratories, Chalk River, ON (Canada)

2015-07-01

An Eulerian-Eulerian two-fluid model has been implemented for the prediction of the gas volume fraction profile in turbulent upward gas-liquid flow in a vertical pipe. The two-fluid transport equations are discretized using the finite volume method and a low Reynolds number κ-ε turbulence model is used to predict the turbulence field for the liquid phase. The contribution to the effective turbulence by the gas phase is modeled by a bubble induced turbulent viscosity. For the fully-developed flow being considered, the gas volume fraction profile is calculated using the radial momentum balance for the bubble phase. The model potentially includes the effect of bubble size on the interphase forces and turbulence model. The results obtained are in good agreement with experimental data from the literature. The one-dimensional formulation being developed allows for the efficient assessment and further development of both turbulence and two-fluid models for multiphase flow applications in the nuclear industry. (author)

Technetium-99m carboxymethylcellulose: A newly developed fibre marker for gastric emptying studies

International Nuclear Information System (INIS)

Schade, J.H.; Hoving, J.; Brouweres, J.R.B.J.; Riedstra-van Gent, H.G.; Zijlstra, J.; Dijkstra, J.P.H.

1991-01-01

We report a study of technetium-99m-labelled carboxymethyl-cellulose ( 99m Tc-CMC) as a newly developed non-digestible marker of the solid phase of gastric contents. The radiosynthesis is simple and shows a high labelling efficiency. In vitro and in vivo experiments demonstrated stability of the marker in the gastrointestinal tract during the process of gastric emptying. The gastric half-emptying time in ten healthy volunteers of both sexes was 105±17 min (mean±SD). This rate of gastric emptying is similar to that of non-digestible solid-phase markers such as in vivo labelled 99m Tc-chicken liver or radio-iodinated cellulose. In comparison with digestible solid-phase markers such as 99m Tc-labelled pancake or 99m Tc-cooked egg, gastric emptying of 99m Tc-CMC occurred more slowly, confirming the expected behaviour of a non-digestible solid-phase marker. We conclude that 99m Tc-CMC has the advantage of a simple and rapid labelling procedure and may be useful for clinical studies of gastric emptying. (orig.)

THE NEXUS BETWEEN ENERGY CONSUMPTION AND FINANCIAL DEVELOPMENT WITH ASYMMETRIC CAUSALITY TEST: NEW EVIDENCE FROM NEWLY INDUSTRIALIZED COUNTRIES

Directory of Open Access Journals (Sweden)

Feyyaz Zeren

2014-01-01

Full Text Available In this study, the relationship between energy consumption and financial development is investigated via Hatemi-J asymmetric causality test (2012 which is able to separate positive and negative shocks in analysis. In order to determine different dimensions of financial system, deposit money bank assets to GDP (dbagdp, financial system deposits to GDP (fdgdp and private credit to GDP (pcrdbgdp were used as three different indicators. As a result of this study on Newly Industrialized 7 Countries spanning the period 1971 till 2010, both positive and negative shocks existed for Malaysia and Mexico, causality from energy consumption to financial developments emerged for Philippines in only negative shocks. While two-way causality occurred for India, Turkey and Thailand, there was not for South Africa.

Design of an X-band accelerating structure using a newly developed structural optimization procedure

Energy Technology Data Exchange (ETDEWEB)

Huang, Xiaoxia [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Fang, Wencheng; Gu, Qiang [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Zhao, Zhentang, E-mail: zhaozhentang@sinap.ac.cn [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); University of Chinese Academy of Sciences, Beijing 100049 (China)

2017-05-11

An X-band high gradient accelerating structure is a challenging technology for implementation in advanced electron linear accelerator facilities. The present work discusses the design of an X-band accelerating structure for dedicated application to a compact hard X-ray free electron laser facility at the Shanghai Institute of Applied Physics, and numerous design optimizations are conducted with consideration for radio frequency (RF) breakdown, RF efficiency, short-range wakefields, and dipole/quadrupole field modes, to ensure good beam quality and a high accelerating gradient. The designed X-band accelerating structure is a constant gradient structure with a 4π/5 operating mode and input and output dual-feed couplers in a racetrack shape. The design process employs a newly developed effective optimization procedure for optimization of the X-band accelerating structure. In addition, the specific design of couplers providing high beam quality by eliminating dipole field components and reducing quadrupole field components is discussed in detail.

Duplex ultrasound: Indications and findings in a newly created ...

African Journals Online (AJOL)

Duplex ultrasound: Indications and findings in a newly created facility at the University of Calabar Teaching Hospital, Calabar. ... It is recommended that timely referrals be made, and mobile Doppler units be acquired to save more lives and limbs in the developing world. Keywords: Calabar, deep venous thrombosis, duplex ...

Analysis of thermal dispersion in an array of parallel plates with fully-developed laminar flow

International Nuclear Information System (INIS)

Xu Jiaying; Lu Tianjian; Hodson, Howard P.; Fleck, Norman A.

2010-01-01

The effect of thermal dispersion upon heat transfer across a periodic array of parallel plates is studied. Three basic heat transfer problems are addressed, each for steady, fully-developed, laminar fluid flow: (a) transient heat transfer due to an arbitrary initial temperature distribution within the fluid, (b) steady heat transfer with constant heat flux on all plate surfaces, and (c) steady heat transfer with constant wall temperatures. For problems (a) and (b), the effective thermal dispersivity scales with the Peclet number Pe according to 1 + CPe 2 , where the coefficient C is independent of Pe. For problem (c) the coefficient C is a function of Pe.

Development of a fully automated network system for long-term health-care monitoring at home.

Science.gov (United States)

Motoi, K; Kubota, S; Ikarashi, A; Nogawa, M; Tanaka, S; Nemoto, T; Yamakoshi, K

2007-01-01

Daily monitoring of health condition at home is very important not only as an effective scheme for early diagnosis and treatment of cardiovascular and other diseases, but also for prevention and control of such diseases. From this point of view, we have developed a prototype room for fully automated monitoring of various vital signs. From the results of preliminary experiments using this room, it was confirmed that (1) ECG and respiration during bathing, (2) excretion weight and blood pressure, and (3) respiration and cardiac beat during sleep could be monitored with reasonable accuracy by the sensor system installed in bathtub, toilet and bed, respectively.

Competence of newly qualified registered nurses from a nursing college

Directory of Open Access Journals (Sweden)

BG Morolong

2005-09-01

Full Text Available The South African education and training system, through its policy of outcomesbased education and training, has made competency a national priority. In compliance to this national requirement of producing competent learners, the South African Nursing Council ( 1999 B require that the beginner professional nurse practitioners and midwives have the necessary knowledge, skills, attitudes and values which will enable them to render efficient professional service. The health care system also demands competent nurse practitioners to ensure quality in health care. In the light of competency being a national priority and a statutory demand, the research question that emerges is, how competent are the newly qualified registered nurses from a specific nursing college in clinical nursing education? A quantitative, non-experimental contextual design was used to evaluate the competence of newly qualified registered nurses from a specific nursing college. The study was conducted in two phases. The first phase dealt with the development of an instrument together with its manual through the conceptualisation process. The second phase focused on the evaluation of the competency of newly qualified nurses using the instrument based on the steps of the nursing process. A pilot study was conducted to test the feasibility of the items of the instrument. During the evaluation phase, a sample of twenty-six newly qualified nurses was selected by simple random sampling from a target population of thirty-six newly qualified registered nurses. However, six participants withdrew from the study. Data was collected in two general hospitals where the newly qualified registered nurses were working. Observation and questioning were used as data collection techniques in accordance with the developed instrument. Measures were taken to ensure internal validity and reliability of the results. To protect the rights of the participants, the researcher adhered to DENOSA’S (1998

A newly developed grab sampling system for collecting stratospheric air over Antarctica

Directory of Open Access Journals (Sweden)

Hideyuki Honda

1996-07-01

Full Text Available In order to measure the concentrations of various minor constituents and their isotopic ratios in the stratosphere over Antarctica, a simple grab sampling system was newly developed. The sampling system was designed to be launched by a small number of personnel using a rubber balloon under severe experimental conditions. Special attention was paid to minimize the contamination of sample air, as well as to allow easy handling of the system. The sampler consisted mainly of a 15l sample container with electromagnetic and manual valves, control electronics for executing the air sampling procedures and sending the position and status information of the sampler to the ground station, batteries and a transmitter. All these parts were assembled in an aluminum frame gondola with a shock absorbing system for landing. The sampler was equipped with a turn-over mechanism of the gondola to minimize contamination from the gondola, as well as with a GPS receiver and a rawinsonde for its tracking. Total weight of the sampler was about 11kg. To receive, display and store the position and status data of the sampling system at the ground station, a simple data acquisition system with a portable receiver and a microcomputer was also developed. A new gas handling system was prepared to simplify the injection of He gas into the balloon. For air sampling experiments, three sampling systems were launched at Syowa Station (69°00′S, 39°35′E, Antarctica and then recovered on sea ice near the station on January 22 and 25,1996.

Evaluation of newly developed veterinary portable blood glucose meter with hematocrit correction in dogs and cats.

Science.gov (United States)

Mori, Akihiro; Oda, Hitomi; Onozawa, Eri; Shono, Saori; Sako, Toshinori

2017-10-07

This study evaluated the accuracy of a newly developed veterinary portable blood glucose meter (PBGM) with hematocrit correction in dogs and cats. Sixty-one dogs and 31 cats were used for the current study. Blood samples were obtained from each dog and cat one to six times. Acceptable results were obtained in error grid analysis between PBGM and reference method values (glucose oxidation methods) in both dogs and cats. Bland-Altman plot analysis revealed a mean difference between the PBGM value and reference method value of -1.975 mg/dl (bias) in dogs and 1.339 mg/dl (bias) in cats. Hematocrit values did not affect the results of the veterinary PBGM. Therefore, this veterinary PBGM is clinically useful in dogs and cats.

Newly-graduated midwives transcending barriers: a grounded theory study.

Science.gov (United States)

Barry, Michele J; Hauck, Yvonne L; O'Donoghue, Thomas; Clarke, Simon

2013-12-01

Midwifery has developed its own philosophy to formalise its unique identity as a profession. Newly-graduated midwives are taught, and ideally embrace, this philosophy during their education. However, embarking in their career within a predominantly institutionalised and the medically focused health-care model may challenge this application. The research question guiding this study was as follows: 'How do newly graduated midwives deal with applying the philosophy of midwifery in their first six months of practice?' The aim was to generate a grounded theory around this social process. This Western Australian grounded theory study is conceptualised within the social theory of symbolic interactionism. Data were collected by means of in-depth, semi-structured interviews with 11 recent midwifery graduates. Participant and interviewer's journals provided supplementary data. The 'constant comparison' approach was used for data analysis. The substantive theory of transcending barriers was generated. Three stages in transcending barriers were identified: Addressing personal attributes, Understanding the 'bigger picture', and finally, 'Evaluating, planning and acting' to provide woman-centred care. An overview of these three stages provides the focus of this article. The theory of transcending barriers provides a new perspective on how newly-graduated midwives deal with applying the philosophy of midwifery in their first six months of practice. A number of implications for pre and post registration midwifery education and policy development are suggested, as well as recommendations for future research. Copyright © 2013 Elsevier Ltd. All rights reserved.

Fully Automated Data Collection Using PAM and the Development of PAM/SPACE Reversible Cassettes

Science.gov (United States)

Hiraki, Masahiko; Watanabe, Shokei; Chavas, Leonard M. G.; Yamada, Yusuke; Matsugaki, Naohiro; Igarashi, Noriyuki; Wakatsuki, Soichi; Fujihashi, Masahiro; Miki, Kunio; Baba, Seiki; Ueno, Go; Yamamoto, Masaki; Suzuki, Mamoru; Nakagawa, Atsushi; Watanabe, Nobuhisa; Tanaka, Isao

2010-06-01

To remotely control and automatically collect data in high-throughput X-ray data collection experiments, the Structural Biology Research Center at the Photon Factory (PF) developed and installed sample exchange robots PAM (PF Automated Mounting system) at PF macromolecular crystallography beamlines; BL-5A, BL-17A, AR-NW12A and AR-NE3A. We developed and installed software that manages the flow of the automated X-ray experiments; sample exchanges, loop-centering and X-ray diffraction data collection. The fully automated data collection function has been available since February 2009. To identify sample cassettes, PAM employs a two-dimensional bar code reader. New beamlines, BL-1A at the Photon Factory and BL32XU at SPring-8, are currently under construction as part of Targeted Proteins Research Program (TPRP) by the Ministry of Education, Culture, Sports, Science and Technology of Japan. However, different robots, PAM and SPACE (SPring-8 Precise Automatic Cryo-sample Exchanger), will be installed at BL-1A and BL32XU, respectively. For the convenience of the users of both facilities, pins and cassettes for PAM and SPACE are developed as part of the TPRP.

A newly developed lubricant, chitosan laurate, in the manufacture of acetaminophen tablets.

Science.gov (United States)

Bani-Jaber, Ahmad; Kobayashi, Asuka; Yamada, Kyohei; Haj-Ali, Dana; Uchimoto, Takeaki; Iwao, Yasunori; Noguchi, Shuji; Itai, Shigeru

2015-04-10

To study the usefulness of chitosan laurate (CS-LA), a newly developed chitosan salt, as a lubricant, lubrication properties such as the pressure transmission ratio and ejection force were determined at different concentrations of CS-LA in tableting. In addition, tablet properties such as the tensile strength, disintegration time, and dissolution behavior, were also determined. When CS-LA was mixed at concentrations of 0.1%-3.0%, the pressure transmission ratio was increased in a concentration-dependent manner, and the value at a CS-LA concentration of 3% was equal to that of magnesium stearate (Mg-St), a widely used lubricant. Additionally, a reduction in the ejection force was observed at a concentration from 1%, proving that CS-LA has good lubrication performance. A prolonged disintegration time and decreased tensile strength, which are known disadvantages of Mg-St, were not observed with CS-LA. Furthermore, with CS-LA, retardation of dissolution of the drug from the tablets was not observed. Conjugation of CS with LA was found to be quite important for both lubricant and tablet properties. In conclusion, CS-LA should be useful as an alternative lubricant to Mg-St. Copyright © 2015 Elsevier B.V. All rights reserved.

Immunoparesis in newly diagnosed Multiple Myeloma patients

DEFF Research Database (Denmark)

Sorrig, Rasmus; Klausen, Tobias W.; Salomo, Morten

2017-01-01

Immunoparesis (hypogammaglobulinemia) is associated to an unfavorable prognosis in newly diagnosed Multiple myeloma (MM) patients. However, this finding has not been validated in an unselected population-based cohort. We analyzed 2558 newly diagnosed MM patients in the Danish Multiple Myeloma...

Soft Ultrathin Electronics Innervated Adaptive Fully Soft Robots.

Science.gov (United States)

Wang, Chengjun; Sim, Kyoseung; Chen, Jin; Kim, Hojin; Rao, Zhoulyu; Li, Yuhang; Chen, Weiqiu; Song, Jizhou; Verduzco, Rafael; Yu, Cunjiang

2018-03-01

Soft robots outperform the conventional hard robots on significantly enhanced safety, adaptability, and complex motions. The development of fully soft robots, especially fully from smart soft materials to mimic soft animals, is still nascent. In addition, to date, existing soft robots cannot adapt themselves to the surrounding environment, i.e., sensing and adaptive motion or response, like animals. Here, compliant ultrathin sensing and actuating electronics innervated fully soft robots that can sense the environment and perform soft bodied crawling adaptively, mimicking an inchworm, are reported. The soft robots are constructed with actuators of open-mesh shaped ultrathin deformable heaters, sensors of single-crystal Si optoelectronic photodetectors, and thermally responsive artificial muscle of carbon-black-doped liquid-crystal elastomer (LCE-CB) nanocomposite. The results demonstrate that adaptive crawling locomotion can be realized through the conjugation of sensing and actuation, where the sensors sense the environment and actuators respond correspondingly to control the locomotion autonomously through regulating the deformation of LCE-CB bimorphs and the locomotion of the robots. The strategy of innervating soft sensing and actuating electronics with artificial muscles paves the way for the development of smart autonomous soft robots. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Scheduling and shift work characteristics associated with risk for occupational injury in newly licensed registered nurses: An observational study.

Science.gov (United States)

Stimpfel, Amy Witkoski; Brewer, Carol S; Kovner, Christine T

2015-11-01

Registered nurses across the globe bear a heavy injury burden. Every shift, nurses are exposed to a variety of hazards that can jeopardize their health, which negatively impacts their ability to provide high-quality patient care. Previous research suggests that inexperienced, or newly licensed nurses, may have an increased risk for certain occupational injuries. However, the current knowledge base is insufficient to fully understand how work hours influence newly licensed nurses' occupational injury, given the significant variation in hospital organization and work characteristics. To describe newly licensed nurses' shift work characteristics and determine the association between shift type and scheduling characteristics and nurse injury, before and after adjusting for individual and combined effects of demographics, external context, organizational context, and work context, following the Organization of Work model. This study is a secondary analysis of a nationally representative survey of newly licensed registered nurses using a cross-sectional design. The analytic sample includes 1744 newly licensed registered nurses from 34 states and the District of Columbia who reported working in a hospital and were within 6-18 months of passing their state licensure exam at the time of survey administration. Descriptive statistics were calculated, followed by bivariate and multivariate Poisson regression models to assess the relationship between shift type and scheduling characteristics and nurse injury. Lastly, full models with the addition of demographics, external context, organizational context, and work context variables were calculated. The majority (79%) of newly licensed nurses worked 12-h shifts, a near majority worked night shift (44%), and over half (61%) worked overtime (mandatory or voluntary) weekly. Nurses working weekly overtime were associated with a 32% [incidence rate ratio (IRR) 1.32, CI 1.07-1.62] increase in the risk of a needle stick and nurses

A Newly Developed Method for Computing Reliability Measures in a Water Supply Network

Directory of Open Access Journals (Sweden)

Jacek Malinowski

2016-01-01

Full Text Available A reliability model of a water supply network has beens examined. Its main features are: a topology that can be decomposed by the so-called state factorization into a (relativelysmall number of derivative networks, each having a series-parallel structure (1, binary-state components (either operative or failed with given flow capacities (2, a multi-state character of the whole network and its sub-networks - a network state is defined as the maximal flow between a source (sources and a sink (sinks (3, all capacities (component, network, and sub-network have integer values (4. As the network operates, its state changes due to component failures, repairs, and replacements. A newly developed method of computing the inter-state transition intensities has been presented. It is based on the so-called state factorization and series-parallel aggregation. The analysis of these intensities shows that the failure-repair process of the considered system is an asymptotically homogenous Markov process. It is also demonstrated how certain reliability parameters useful for the network maintenance planning can be determined on the basis of the asymptotic intensities. For better understanding of the presented method, an illustrative example is given. (original abstract

Generational differences among newly licensed registered nurses.

Science.gov (United States)

Keepnews, David M; Brewer, Carol S; Kovner, Christine T; Shin, Juh Hyun

2010-01-01

Responses of 2369 newly licensed registered nurses from 3 generational cohorts-Baby Boomers, Generation X, and Generation Y-were studied to identify differences in their characteristics, work-related experiences, and attitudes. These responses revealed significant differences among generations in: job satisfaction, organizational commitment, work motivation, work-to-family conflict, family-to-work conflict, distributive justice, promotional opportunities, supervisory support, mentor support, procedural justice, and perceptions of local job opportunities. Health organizations and their leaders need to anticipate intergenerational differences among newly licensed nurses and should provide for supportive working environments that recognize those differences. Orientation and residency programs for newly licensed nurses should be tailored to the varying needs of different generations. Future research should focus on evaluating the effectiveness of orientation and residency programs with regard to different generations so that these programs can be tailored to meet the varying needs of newly licensed nurses at the start of their careers. Copyright 2010 Mosby, Inc. All rights reserved.

Mentorship for newly appointed physicians: a strategy for enhancing patient safety?

Science.gov (United States)

Harrison, Reema; McClean, Serwaa; Lawton, Rebecca; Wright, John; Kay, Clive

2014-09-01

Mentorship is an increasingly popular innovation from business and industry that is being applied in health-care contexts. This paper explores the concept of mentorship for newly appointed physicians in their first substantive senior post, and specifically its utilization to enhance patient safety. Semi-structured face to face and telephone interviews with Medical Directors (n = 5), Deputy Medical Directors (n = 4), and Clinical Directors (n = 6) from 9 acute NHS Trusts in the Yorkshire and Humber region in the north of England. A focused thematic analysis was used. A number of beneficial outcomes were associated with mentorship for newly appointed physicians including greater personal and professional support, organizational commitment, and general well-being. Providing newly appointed senior physicians with support through mentorship was considered to enhance the safety of patient care. Mentorship may prevent or reduce active failures, be used to identify threats in the local working environment, and in the longer term, address latent threats to safety within the organization by encouraging a healthier safety culture. Offering mentorship to all newly appointed physicians in their first substantive post in health care may be a useful strategy to support the development of their clinical, professional, and personal skills in this transitional period that may also enhance the safety of patient care.

Fully integrated digital GAMMA camera-computer system

International Nuclear Information System (INIS)

Berger, H.J.; Eisner, R.L.; Gober, A.; Plankey, M.; Fajman, W.

1985-01-01

Although most of the new non-nuclear imaging techniques are fully digital, there has been a reluctance in nuclear medicine to abandon traditional analog planar imaging in favor of digital acquisition and display. The authors evaluated a prototype digital camera system (GE STARCAM) in which all of the analog acquisition components are replaced by microprocessor controls and digital circuitry. To compare the relative effects of acquisition matrix size on image quality and to ascertain whether digital techniques could be used in place of analog imaging, Tc-99m bone scans were obtained on this digital system and on a comparable analog camera in 10 patients. The dedicated computer is used for camera setup including definition of the energy window, spatial energy correction, and spatial distortion correction. The display monitor, which is used for patient positioning and image analysis, is 512/sup 2/ non-interlaced, allowing high resolution imaging. Data acquisition and processing can be performed simultaneously. Thus, the development of a fully integrated digital camera-computer system with optimized display should allow routine utilization of non-analog studies in nuclear medicine and the ultimate establishment of fully digital nuclear imaging laboratories

Advanced TEM Characterization for the Development of 28-14nm nodes based on fully-depleted Silicon-on-Insulator Technology

International Nuclear Information System (INIS)

Servanton, G; Clement, L; Lepinay, K; Lorut, F; Pantel, R; Pofelski, A; Bicais, N

2013-01-01

The growing demand for wireless multimedia applications (smartphones, tablets, digital cameras) requires the development of devices combining both high speed performances and low power consumption. A recent technological breakthrough making a good compromise between these two antagonist conditions has been proposed: the 28-14nm CMOS transistor generations based on a fully-depleted Silicon-on-Insulator (FD-SOI) performed on a thin Si film of 5-6nm. In this paper, we propose to review the TEM characterization challenges that are essential for the development of extremely power-efficient System on Chip (SoC)

[An Introduction to A Newly-developed "Acupuncture Needle Manipulation Training-evaluation System" Based on Optical Motion Capture Technique].

Science.gov (United States)

Zhang, Ao; Yan, Xing-Ke; Liu, An-Guo

2016-12-25

In the present paper, the authors introduce a newly-developed "Acupuncture Needle Manipulation Training-evaluation System" based on optical motion capture technique. It is composed of two parts, sensor and software, and overcomes some shortages of mechanical motion capture technique. This device is able to analyze the data of operations of the pressing-hand and needle-insertion hand during acupuncture performance and its software contains personal computer (PC) version, Android version, and Internetwork Operating System (IOS) Apple version. It is competent in recording and analyzing information of any ope-rator's needling manipulations, and is quite helpful for teachers in teaching, training and examining students in clinical practice.

Guidelines for developing certification programs for newly generated TRU waste

International Nuclear Information System (INIS)

Whitty, W.J.; Ostenak, C.A.; Pillay, K.K.S.; Geoffrion, R.R.

1983-05-01

These guidelines were prepared with direction from the US Department of Energy (DOE) Transuranic (TRU) Waste Management Program in support of the DOE effort to certify that newly generated TRU wastes meet the Waste Isolation Pilot Plant (WIPP) Waste Acceptance Criteria. The guidelines provide instructions for generic Certification Program preparation for TRU-waste generators preparing site-specific Certification Programs in response to WIPP requirements. The guidelines address all major aspects of a Certification Program that are necessary to satisfy the WIPP Waste Acceptance Criteria and their associated Compliance Requirements and Certification Quality Assurance Requirements. The details of the major element of a Certification Program, namely, the Certification Plan, are described. The Certification Plan relies on supporting data and control documentation to provide a traceable, auditable account of certification activities. Examples of specific parts of the Certification Plan illustrate the recommended degree of detail. Also, a brief description of generic waste processes related to certification activities is included

Newly democratic Mongolia offering exploration contracts

International Nuclear Information System (INIS)

Penttila, W.C.

1992-01-01

This paper reports that Mongolia, formerly the Mongolian People's Republic, is working to open its exploration prospects to international operators as it emerges as the world's 15th largest independent nation. The country, about the same size as Alaska with a population of 2 million, held its first free election in July 1990. The newly elected government drafted a constitution that took effect Feb. 12, 1992. The document modifies the previous government's structures to eliminate bureaucracy and allows for political pluralism. At the same time, the government is formulating energy policies, state oil company structure, and resource development philosophy

Lattice Boltzmann simulations of heat transfer in fully developed periodic incompressible flows

Science.gov (United States)

Wang, Zimeng; Shang, Helen; Zhang, Junfeng

2017-06-01

Flow and heat transfer in periodic structures are of great interest for many applications. In this paper, we carefully examine the periodic features of fully developed periodic incompressible thermal flows, and incorporate them in the lattice Boltzmann method (LBM) for flow and heat transfer simulations. Two numerical approaches, the distribution modification (DM) approach and the source term (ST) approach, are proposed; and they can both be used for periodic thermal flows with constant wall temperature (CWT) and surface heat flux boundary conditions. However, the DM approach might be more efficient, especially for CWT systems since the ST approach requires calculations of the streamwise temperature gradient at all lattice nodes. Several example simulations are conducted, including flows through flat and wavy channels and flows through a square array with circular cylinders. Results are compared to analytical solutions, previous studies, and our own LBM calculations using different simulation techniques (i.e., the one-module simulation vs. the two-module simulation, and the DM approach vs. the ST approach) with good agreement. These simple, however, representative simulations demonstrate the accuracy and usefulness of our proposed LBM methods for future thermal periodic flow simulations.

Comparison of a newly developed binary typing with ribotyping and multilocus sequence typing methods for Clostridium difficile.

Science.gov (United States)

Li, Zhirong; Liu, Xiaolei; Zhao, Jianhong; Xu, Kaiyue; Tian, Tiantian; Yang, Jing; Qiang, Cuixin; Shi, Dongyan; Wei, Honglian; Sun, Suju; Cui, Qingqing; Li, Ruxin; Niu, Yanan; Huang, Bixing

2018-04-01

Clostridium difficile is the causative pathogen for antibiotic-related nosocomial diarrhea. For epidemiological study and identification of virulent clones, a new binary typing method was developed for C. difficile in this study. The usefulness of this newly developed optimized 10-loci binary typing method was compared with two widely used methods ribotyping and multilocus sequence typing (MLST) in 189 C. difficile samples. The binary typing, ribotyping and MLST typed the samples into 53 binary types (BTs), 26 ribotypes (RTs), and 33 MLST sequence types (STs), respectively. The typing ability of the binary method was better than that of either ribotyping or MLST expressed in Simpson Index (SI) at 0.937, 0.892 and 0.859, respectively. The ease of testing, portability and cost-effectiveness of the new binary typing would make it a useful typing alternative for outbreak investigations within healthcare facilities and epidemiological research. Copyright © 2018 Elsevier B.V. All rights reserved.

Who Is Doing Well? A Typology of Newly Homeless Adolescents

Science.gov (United States)

Milburn, Norweeta; Liang, Li-Jung; Lee, Sung-Jae; Rotheram-Borus, Mary Jane; Rosenthal, Doreen; Mallett, Shelley; Lightfoot, Marguerita; Lester, Patricia

2009-01-01

There is growing evidence to support developing new typologies for homeless adolescents. Current typologies focus on the risks associated with being homeless, with less consideration of the positive attributes of homeless adolescents. The authors examined both risk and protective factors in a sample of newly homeless adolescents. Using cluster…

Newly graduated nurses' empowerment regarding professional competence and other work-related factors.

Science.gov (United States)

Kuokkanen, Liisa; Leino-Kilpi, Helena; Numminen, Olivia; Isoaho, Hannu; Flinkman, Mervi; Meretoja, Riitta

2016-01-01

Although both nurse empowerment and competence are fundamental concepts of describing newly graduated nurses' professional development and job satisfaction, only few studies exist on the relationship between these concepts. Therefore, the purpose of this study was to determine how newly graduated nurses assess their empowerment and to clarify professional competence compared to other work-related factors. A descriptive, cross-sectional and correlational design was applied. The sample comprised newly graduated nurses (n = 318) in Finland. Empowerment was measured using the 19-item Qualities of an Empowered Nurse scale and the Nurse Competence Scale measured nurses' self-assessed generic competence. In addition to demographic data, the background data included employment sector (public/private), job satisfaction, intent to change/leave job, work schedule (shifts/business hours) and assessments of the quality of care in the workplace. The data were analysed statistically by using Spearman's correlation coefficient as well as the One-Way and Multivariate Analysis of Variance. Cronbach's alpha coefficient was used to estimate the internal consistency. Newly graduated nurses perceived their level of empowerment and competence fairly high. The association between nurse empowerment and professional competence was statistically significant. Other variables correlating positively to empowerment included employment sector, age, job satisfaction, intent to change job, work schedule, and satisfaction with the quality of care in the work unit. The study indicates competence had the strongest effect on newly graduated nurses' empowerment. New graduates need support and career opportunities. In the future, nurses' further education and nurse managers' resources for supporting and empowering nurses should respond to the newly graduated nurses' requisites for attractive and meaningful work.

Use of a newly developed active thermal neutron detector for in-phantom measurements in a medical LINAC

Energy Technology Data Exchange (ETDEWEB)

Bodogni, R.; Sanchez-Doblado, F.; Pola, A.; Gentile, A.; Esposito, A.; Gomez-ros, J. M.; Pressello, M. C.; Lagares, J. I.; Terron, J. A.; Gomez, F.

2013-07-01

In this work a newly developed active thermal neutron detector, based on a solid state analog device, was used to determine the thermal neutron fluence in selected positions of a simplified human phantom undergoing radiotherapy with a 15 MV LINAC. The results are compared with TLD, the predictions from a Monte Carlo simulation and with measurements indirectly performed with a digital device, located far from the phantom, inside the treatment room. In this work only TLD comparison is presented. Since active neutron instruments are usually affected by systematic deviations when used in a pulsed field with large photon background, the new detector offered in this work may represent an innovative and useful tool for neutron evaluations in accelerator-based radiotherapy. (Author)

Adapted to change: The rapid development of symbiosis in newly settled, fast-maturing chemosymbiotic mussels in the deep sea.

Science.gov (United States)

Laming, Sven R; Duperron, Sébastien; Gaudron, Sylvie M; Hilário, Ana; Cunha, Marina R

2015-12-01

Symbioses between microbiota and marine metazoa occur globally at chemosynthetic habitats facing imminent threat from anthropogenic disturbance, yet little is known concerning the role of symbiosis during early development in chemosymbiotic metazoans: a critical period in any benthic species' lifecycle. The emerging symbiosis of Idas (sensu lato) simpsoni mussels undergoing development is assessed over a post-larval-to-adult size spectrum using histology and fluorescence in situ hybridisation (FISH). Post-larval development shows similarities to that of both heterotrophic and chemosymbiotic mussels. Data from newly settled specimens confirm aposymbiotic, planktotrophic larval development. Sulphur-oxidising (SOX) symbionts subsequently colonise multiple exposed, non-ciliated epithelia shortly after metamorphosis, but only become abundant on gills as these expand with greater host size. This wide-spread bathymodiolin recorded from sulphidic wood, bone and cold-seep habitats, displays a suite of adaptive traits that could buffer against anthropogenic disturbance. Copyright © 2015 Elsevier Ltd. All rights reserved.

Physicochemical properties of newly developed bioactive glass cement and its effects on various cells.

Science.gov (United States)

Washio, Ayako; Nakagawa, Aika; Nishihara, Tatsuji; Maeda, Hidefumi; Kitamura, Chiaki

2015-02-01

Biomaterials used in dental treatments are expected to have favorable properties such as biocompatibility and an ability to induce tissue formation in dental pulp and periapical tissue, as well as sealing to block external stimuli. Bioactive glasses have been applied in bone engineering, but rarely applied in the field of dentistry. In the present study, bioactive glass cement for dental treatment was developed, and then its physicochemical properties and effects on cell responses were analyzed. To clarify the physicochemical attributes of the cement, field emission scanning electron microscopy, X-ray diffraction, and pH measurement were carried out. Cell attachment, morphology, and viability to the cement were also examined to clarify the effects of the cement on odontoblast-like cells (KN-3 cells), osteoblastic cells (MC3T3-E1 cells), human periodontal ligament stem/progenitor cells and neuro-differentiative cells (PC-12 cells). Hydroxyapatite-like precipitation was formed on the surface of the hardened cement and the pH level changed from pH10 to pH9, then stabilized in simulate body fluid. The cement had no cytotxic effects on these cells, and particulary induced process elongation of PC-12 cells. Our results suggest that the newly developed bioactive glass cement have capability of the application in dental procedures as bioactive cement. © 2014 Wiley Periodicals, Inc.

Newly developed low-temperature scanning tunneling microscope and its application to the study of superconducting materials

International Nuclear Information System (INIS)

Gao, F.; Dai, C.; Chen, Z.; Huang, G.; Bai, C.; Tao, H.; Yin, B.; Yang, Q.; Zhao, Z.

1994-01-01

A newly developed scanning tunneling microscope (STM) capable of operating at room temperature, 77 K, and 4.2 K is presented. This compact STM has a highly symmetric and rigid tunneling unit designed as an integral frame except the coarse and fine adjustment parts. The tunneling unit is incorporated into a small vacuum chamber that is usually pumped down to 2x10 -4 Pa to avoid water contamination. The fine mechanic adjustment makes the tip approach the sample in 5 nm steps. The coarse adjustment not only changes the distance between the tip and the sample, but also adjusts the tip to be normal to the surface of the sample. With this low-temperature STM atomic resolution images of Bi-2212 single-crystal and large-scale topographies of a YBa 2 Cu 3 O 7 thin film are observed at 77 K

Feasibility and preliminary effects of an intervention targeting schema development for caregivers of newly admitted hospice patients.

Science.gov (United States)

Lindstrom, Kathryn B; Mazurek Melnyk, Bernadette

2013-06-01

The transition to hospice care is a stressful experience for caregivers, who report high anxiety, unpreparedness, and lack of confidence. These sequelae are likely explained by the lack of an accurate cognitive schema, not knowing what to expect or how to help their loved one. Few interventions exist for this population and most do not measure preparedness, confidence, and anxiety using a schema building a conceptual framework for a new experience. The purpose of this study was to test the feasibility and preliminary effects of an intervention program, Education and Skill building Intervention for Caregivers of Hospice patients (ESI-CH), using an innovative conceptual design that targets cognitive schema development and basic skill building for caregivers of loved ones newly admitted to hospice services. A pre-experimental one-group pre- and post-test study design was used. Eighteen caregivers caring for loved ones in their homes were recruited and twelve completed the pilot study. Depression, anxiety, activity restriction, preparedness, and beliefs/confidence were measured. Caregivers reported increased preparedness, more helpful beliefs, and more confidence about their ability to care for their loved one. Preliminary trends suggested decreased anxiety levels for the intervention group. Caregivers who completed the intervention program rated the program very good or excellent, thought the information was helpful and timely, and would recommend it to friends. Results show promise that the ESI-CH program may assist as an evidence-based program to support caregivers in their role as a caregiver to a newly admitted hospice patient.

Renormalization group in the theory of fully developed turbulence. Problem of the infrared relevant corrections to the Navier-Stokes equation

International Nuclear Information System (INIS)

Antonov, N.V.; Borisenok, S.V.; Girina, V.I.

1996-01-01

Within the framework of the renormalization group approach to the theory of fully developed turbulence we consider the problem of possible IR relevant corrections to the Navier-Stokes equation. We formulate an exact criterion of the actual IR relevance of the corrections. In accordance with this criterion we verify the IR relevance for certain classes of composite operators. 17 refs., 2 tabs

A fully-integrated 12.5-Gb/s 850-nm CMOS optical receiver based on a spatially-modulated avalanche photodetector.

Science.gov (United States)

Lee, Myung-Jae; Youn, Jin-Sung; Park, Kang-Yeob; Choi, Woo-Young

2014-02-10

We present a fully integrated 12.5-Gb/s optical receiver fabricated with standard 0.13-µm complementary metal-oxide-semiconductor (CMOS) technology for 850-nm optical interconnect applications. Our integrated optical receiver includes a newly proposed CMOS-compatible spatially-modulated avalanche photodetector, which provides larger photodetection bandwidth than previously reported CMOS-compatible photodetectors. The receiver also has high-speed CMOS circuits including transimpedance amplifier, DC-balanced buffer, equalizer, and limiting amplifier. With the fabricated optical receiver, detection of 12.5-Gb/s optical data is successfully achieved at 5.8 pJ/bit. Our receiver achieves the highest data rate ever reported for 850-nm integrated CMOS optical receivers.

Fully implicit kinetic modelling of collisional plasmas

International Nuclear Information System (INIS)

Mousseau, V.A.

1996-05-01

This dissertation describes a numerical technique, Matrix-Free Newton Krylov, for solving a simplified Vlasov-Fokker-Planck equation. This method is both deterministic and fully implicit, and may not have been a viable option before current developments in numerical methods. Results are presented that indicate the efficiency of the Matrix-Free Newton Krylov method for these fully-coupled, nonlinear integro-differential equations. The use and requirement for advanced differencing is also shown. To this end, implementations of Chang-Cooper differencing and flux limited Quadratic Upstream Interpolation for Convective Kinematics (QUICK) are presented. Results are given for a fully kinetic ion-electron problem with a self consistent electric field calculated from the ion and electron distribution functions. This numerical method, including advanced differencing, provides accurate solutions, which quickly converge on workstation class machines. It is demonstrated that efficient steady-state solutions can be achieved to the non-linear integro-differential equation, obtaining quadratic convergence, without incurring the large memory requirements of an integral operator. Model problems are presented which simulate plasma impinging on a plate with both high and low neutral particle recycling typical of a divertor in a Tokamak device. These model problems demonstrate the performance of the new solution method

Fluorescent and radiolabelling of pepsin-digested human glomerular basement membrane with a newly developed hydroxy-coumarin derivative (CASE)

International Nuclear Information System (INIS)

Rand-Weaver, M.; Abuknesha, R.A.; Price, R.G.

1985-01-01

The labelling of pepsin-digested human glomerular basement membrane (pHGBM) with a newly developed fluorescent iodine acceptor 7-hydroxy-coumarin-3-acetic acid N-hydroxysucciniimydyl ester (CASE) is described. The binding of a monoclonal antibody to pHGBM was assessed by radiobinding assays, and when directly iodinated pHGBM was used there was no apparent binding. When CASE was conjugated to pHGBM prior to iodination 11% binding was achieved. CASE acting as an iodine acceptor may be useful for proteins containing few or inaccessible tyrosine residues or which are destroyed by introduction of 125 I. Since CASE is fluorescent, small amounts of material can be detected during isolation prior to iodination. (orig.)

Fully NLO Parton Shower in QCD

International Nuclear Information System (INIS)

Skrzypek, M.; Jadach, S.; Slawinska, M.; Gituliar, O.; Kusina, A.; Placzek, W.

2011-01-01

The project of constructing a complete NLO-level Parton Shower Monte Carlo for the QCD processes developed in IFJ PAN in Krakow is reviewed. Four issues are discussed: (1) the extension of the standard inclusive collinear factorization into a new, fully exclusive scheme; (2) reconstruction of the LO Parton Shower in the new scheme; (3) inclusion of the exclusive NLO corrections into the hard process and (4) inclusion of the exclusive NLO corrections into the evolution (ladder) part. (authors)

Efficient fully controlled up-to-date equipment for catalytic treatment of waste gases

International Nuclear Information System (INIS)

Dvorak, Radek; Stulir, Roman; Cagas, Pavel

2007-01-01

This paper describes research and development of a new unit for catalytic destruction of waste gases polluted mainly by volatile organic compounds (VOC), halogenated organic compounds (HOC) or carbon monoxide. Novel equipment has considerable advantages compared with commonly used arrangement (combustion chamber (catalytic reactor)-pipeline-heat exchanger). It is very compact and light and has the combustion chamber, catalytic reactor and heat exchanger integrated into one unit. Maximum utilizing heat losses in the combustion chamber and catalytic reactor is achieved. During the development of this unit experience from tests of previously developed equipment used for thermal treatment of waste gases was used, as well as from experimental studies of catalytic disposal of various VOC carried out in the newly built experimental unit. During the development calculation methods were created allowing design modifications of this unit for real industrial applications. The newly developed unit can be used in various branches of industry such as paint shops, refining plants, sewage treatment plants, food processing industry, pharmaceutical industry, but also in companies processing and transporting crude-oil or natural gas, etc

Development and evaluation of fully automated demand response in large facilities

Energy Technology Data Exchange (ETDEWEB)

Piette, Mary Ann; Sezgen, Osman; Watson, David S.; Motegi, Naoya; Shockman, Christine; ten Hope, Laurie

2004-03-30

This report describes the results of a research project to develop and evaluate the performance of new Automated Demand Response (Auto-DR) hardware and software technology in large facilities. Demand Response (DR) is a set of activities to reduce or shift electricity use to improve electric grid reliability, manage electricity costs, and ensure that customers receive signals that encourage load reduction during times when the electric grid is near its capacity. The two main drivers for widespread demand responsiveness are the prevention of future electricity crises and the reduction of electricity prices. Additional goals for price responsiveness include equity through cost of service pricing, and customer control of electricity usage and bills. The technology developed and evaluated in this report could be used to support numerous forms of DR programs and tariffs. For the purpose of this report, we have defined three levels of Demand Response automation. Manual Demand Response involves manually turning off lights or equipment; this can be a labor-intensive approach. Semi-Automated Response involves the use of building energy management control systems for load shedding, where a preprogrammed load shedding strategy is initiated by facilities staff. Fully-Automated Demand Response is initiated at a building or facility through receipt of an external communications signal--facility staff set up a pre-programmed load shedding strategy which is automatically initiated by the system without the need for human intervention. We have defined this approach to be Auto-DR. An important concept in Auto-DR is that a facility manager is able to ''opt out'' or ''override'' an individual DR event if it occurs at a time when the reduction in end-use services is not desirable. This project sought to improve the feasibility and nature of Auto-DR strategies in large facilities. The research focused on technology development, testing

Fully developed laminar flow of non-Newtonian liquids through annuli: comparison of numerical calculations with experiments

Energy Technology Data Exchange (ETDEWEB)

Escudier, M.P.; Smith, S. [Department of Engineering, Mechanical Engineering, University of Liverpool, Brownlow Hill, Liverpool L69 3GH (United Kingdom); Oliveira, P.J. [Departamento de Engenharia Electromecanica, Universidade da Beira Interior, Rua Marques D' Avila e Boloma, 6200 Covilha (Portugal); Pinho, F.T. [Centro de Estudos de Fenomenos de Transporte, DEMEGI, Faculdade de Engenharia, Universidade do Porto, Rua Roberto Frias, 4200-465 Porto (Portugal)

2002-07-01

Experimental data are reported for fully developed laminar flow of a shear-thinning liquid through both a concentric and an 80% eccentric annulus with and without centrebody rotation. The working fluid was an aqueous solution of 0.1% xanthan gum and 0.1% carboxymethylcellulose for which the flow curve is well represented by the Cross model. Comparisons are reported between numerical calculations and the flow data, as well as with other laminar annular-flow data for a variety of shear-thinning liquids previously reported in the literature. In general, the calculations are in good quantitative agreement with the experimental data, even in situations where viscoelastic effects, neglected in the calculations, would be expected to play a role. (orig.)

Resistance calculation of un-fully developed two-phase flow through high differential pressure regulating valves

International Nuclear Information System (INIS)

Xu Mingyang; Wang Wenran; Wang Jiaying

1999-01-01

To reduce the flow velocity in the high differential pressure regulating valve with labyrinth. A type of complicated valve core structure were designed with tortuous flow path made from reversal double elbows. It is very difficult to calculate the pressure-drop of the un-fully developed two-phase flow under high temperature and pressure which flow through the valve core. A calculation method called 'constant (varing) pressure-drop progressing step by step design method' was developed. The complicated flow path was disintegrated into a series of independent resistance units and with the valve stem end progressing step by step the dimensions of the flow path were designed in accordance with the principle that in every position the total pressure-drop of the valve should amount to that required by the design goal curve. In the course of calculating the total pressure-drop, the valve flow path was also divided into a series of independent resistance units. The experiment results show that design flow characteristics are approximately consistent with the flow characteristics measured in the test

Metabolome Profiling of Partial and Fully Reprogrammed Induced Pluripotent Stem Cells.

Science.gov (United States)

Park, Soon-Jung; Lee, Sang A; Prasain, Nutan; Bae, Daekyeong; Kang, Hyunsu; Ha, Taewon; Kim, Jong Soo; Hong, Ki-Sung; Mantel, Charlie; Moon, Sung-Hwan; Broxmeyer, Hal E; Lee, Man Ryul

2017-05-15

Acquisition of proper metabolomic fate is required to convert somatic cells toward fully reprogrammed pluripotent stem cells. The majority of induced pluripotent stem cells (iPSCs) are partially reprogrammed and have a transcriptome different from that of the pluripotent stem cells. The metabolomic profile and mitochondrial metabolic functions required to achieve full reprogramming of somatic cells to iPSC status have not yet been elucidated. Clarification of the metabolites underlying reprogramming mechanisms should enable further optimization to enhance the efficiency of obtaining fully reprogrammed iPSCs. In this study, we characterized the metabolites of human fully reprogrammed iPSCs, partially reprogrammed iPSCs, and embryonic stem cells (ESCs). Using capillary electrophoresis time-of-flight mass spectrometry-based metabolomics, we found that 89% of analyzed metabolites were similarly expressed in fully reprogrammed iPSCs and human ESCs (hESCs), whereas partially reprogrammed iPSCs shared only 74% similarly expressed metabolites with hESCs. Metabolomic profiling analysis suggested that converting mitochondrial respiration to glycolytic flux is critical for reprogramming of somatic cells into fully reprogrammed iPSCs. This characterization of metabolic reprogramming in iPSCs may enable the development of new reprogramming parameters for enhancing the generation of fully reprogrammed human iPSCs.

Fully automated MR liver volumetry using watershed segmentation coupled with active contouring.

Science.gov (United States)

Huynh, Hieu Trung; Le-Trong, Ngoc; Bao, Pham The; Oto, Aytek; Suzuki, Kenji

2017-02-01

Our purpose is to develop a fully automated scheme for liver volume measurement in abdominal MR images, without requiring any user input or interaction. The proposed scheme is fully automatic for liver volumetry from 3D abdominal MR images, and it consists of three main stages: preprocessing, rough liver shape generation, and liver extraction. The preprocessing stage reduced noise and enhanced the liver boundaries in 3D abdominal MR images. The rough liver shape was revealed fully automatically by using the watershed segmentation, thresholding transform, morphological operations, and statistical properties of the liver. An active contour model was applied to refine the rough liver shape to precisely obtain the liver boundaries. The liver volumes calculated by the proposed scheme were compared to the "gold standard" references which were estimated by an expert abdominal radiologist. The liver volumes computed by using our developed scheme excellently agreed (Intra-class correlation coefficient was 0.94) with the "gold standard" manual volumes by the radiologist in the evaluation with 27 cases from multiple medical centers. The running time was 8.4 min per case on average. We developed a fully automated liver volumetry scheme in MR, which does not require any interaction by users. It was evaluated with cases from multiple medical centers. The liver volumetry performance of our developed system was comparable to that of the gold standard manual volumetry, and it saved radiologists' time for manual liver volumetry of 24.7 min per case.

Critical thinking dispositions among newly graduated nurses

Science.gov (United States)

Wangensteen, Sigrid; Johansson, Inger S; Björkström, Monica E; Nordström, Gun

2010-01-01

wangensteen s., johansson i.s., björkström m.e. & nordström g. (2010) Critical thinking dispositions among newly graduated nurses. Journal of Advanced Nursing66(10), 2170–2181. Aim The aim of the study was to describe critical thinking dispositions among newly graduated nurses in Norway, and to study whether background data had any impact on critical thinking dispositions. Background Competence in critical thinking is one of the expectations of nursing education. Critical thinkers are described as well-informed, inquisitive, open-minded and orderly in complex matters. Critical thinking competence has thus been designated as an outcome for judging the quality of nursing education programmes and for the development of clinical judgement. The ability to think critically is also described as reducing the research–practice gap and fostering evidence-based nursing. Methods A cross-sectional descriptive study was performed. The data were collected between October 2006 and April 2007 using the California Critical Thinking Disposition Inventory. The response rate was 33% (n= 618). Pearson’s chi-square tests were used to analyse the data. Results Nearly 80% of the respondents reported a positive disposition towards critical thinking. The highest mean score was on the Inquisitiveness subscale and the lowest on the Truth-seeking subscale. A statistically significant higher proportion of nurses with high critical thinking scores were found among those older than 30 years, those with university education prior to nursing education, and those working in community health care. Conclusion Nurse leaders and nurse teachers should encourage and nurture critical thinking among newly graduated nurses and nursing students. The low Truth-seeking scores found may be a result of traditional teaching strategies in nursing education and might indicate a need for more student-active learning models. PMID:20384637

Planning for the Management and Disposition of Newly Generated TRU Waste from REDC

International Nuclear Information System (INIS)

Coffey, D. E.; Forrester, T. W.; Krause, T.

2002-01-01

This paper describes the waste characteristics of newly generated transuranic waste from the Radiochemical Engineering and Development Center at the Oak Ridge National Laboratory and the basic certification structure that will be proposed by the University of Tennessee-Battelle and Bechtel Jacobs Company LLC to the Waste Isolation Pilot Plant for this waste stream. The characterization approach uses information derived from the active production operations as acceptable knowledge for the Radiochemical Engineering and Development Center transuranic waste. The characterization approach includes smear data taken from processing and waste staging hot cells, as well as analytical data on product and liquid waste streams going to liquid waste disposal. Bechtel Jacobs Company and University of Tennessee-Battelle are currently developing the elements of a Waste Isolation Pilot Plant-compliant program with a plan to be certified by the Waste Isolation Pilot Plant for shipment of newly generated transuranic waste in the next few years. The current activities include developing interface plans, program documents, and waste stream specific procedures

The fully integrated biomedical engineering programme at Eindhoven University of Technology

NARCIS (Netherlands)

Slaaf, D.W.; Genderen, van M.H.P.

2009-01-01

The development of a fully integrated biomedical engineering programme (life sciences included from the start) is described. Details are provided about background, implementation, and didactic concept: design centred learning combined with courses. The curriculum has developed into a

Engineering fluorescent proteins towards ultimate performances: lessons from the newly developed cyan variants

International Nuclear Information System (INIS)

Mérola, Fabienne; Erard, Marie; Fredj, Asma; Pasquier, Hélène

2016-01-01

New fluorescent proteins (FPs) are constantly discovered from natural sources, and submitted to intensive engineering based on random mutagenesis and directed evolution. However, most of these newly developed FPs fail to achieve all the performances required for their bioimaging applications. The design of highly optimised FP-based reporters, simultaneously displaying appropriate colour, multimeric state, chromophore maturation, brightness, photostability and environmental sensitivity will require a better understanding of the structural and dynamic determinants of FP photophysics. The recent development of cyan fluorescent proteins (CFPs) like mCerulean3, mTurquoise2 and Aquamarine brings a different view on these questions, as in this particular case, a step by step evaluation of critical mutations has been performed within a family of spectrally identical and evolutionary close variants. These efforts have led to CFPs with quantum yields close to unity, near single exponential emission decays, high photostability and complete insensitivity to pH, making them ideal choices as energy transfer donors in FRET and FLIM imaging applications. During this process, it was found that a proper amino-acid choice at only two positions (148 and 65) is sufficient to transform the performances of CFPs: with the help of structural and theoretical investigations, we rationalise here how these two positions critically control the CFP photophysics, in the context of FPs derived from the Aequorea victoria species. Today, these results provide a useful toolbox for upgrading the different CFP donors carried by FRET biosensors. They also trace the route towards the de novo design of FP-based optogenetic devices that will be perfectly tailored to dedicated imaging and sensing applications. (topical review)

Fully Automated Volumetric Modulated Arc Therapy Plan Generation for Prostate Cancer Patients

International Nuclear Information System (INIS)

Voet, Peter W.J.; Dirkx, Maarten L.P.; Breedveld, Sebastiaan; Al-Mamgani, Abrahim; Incrocci, Luca; Heijmen, Ben J.M.

2014-01-01

Purpose: To develop and evaluate fully automated volumetric modulated arc therapy (VMAT) treatment planning for prostate cancer patients, avoiding manual trial-and-error tweaking of plan parameters by dosimetrists. Methods and Materials: A system was developed for fully automated generation of VMAT plans with our commercial clinical treatment planning system (TPS), linked to the in-house developed Erasmus-iCycle multicriterial optimizer for preoptimization. For 30 randomly selected patients, automatically generated VMAT plans (VMAT auto ) were compared with VMAT plans generated manually by 1 expert dosimetrist in the absence of time pressure (VMAT man ). For all treatment plans, planning target volume (PTV) coverage and sparing of organs-at-risk were quantified. Results: All generated plans were clinically acceptable and had similar PTV coverage (V 95%  > 99%). For VMAT auto and VMAT man plans, the organ-at-risk sparing was similar as well, although only the former plans were generated without any planning workload. Conclusions: Fully automated generation of high-quality VMAT plans for prostate cancer patients is feasible and has recently been implemented in our clinic

Status of photovoltaics in the Newly Associated States

International Nuclear Information System (INIS)

Pietruszko, S.M.; Mikolajuk, A.; Fara, L.; Fara, S.; Vitanov, P.; Stratieva, N.; Rehak, J.; Barinka, R.; Mellikov, E.; Palfy, M.; Shipkovs, P.; Krotkus, A.; Saly, V.; Nemac, F.; Swens, J.; Nowak, S.; Zachariou, A.; Fechner, H.; Passiniemi, P.

2004-01-01

The Status of Photovoltaics in the Central and Eastern Europe presents the state of the art of photovoltaics (PV) in the Newly Associated States (NAS): Bulgaria, the Czech Republic, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia, Slovenia. The attempt was made to cover all photovoltaics activities in NAS, from research to industry and markets as well as from technology development to dissemination and education. The document covers the following topics and issues: organization of PV research and demonstration activities, stakeholders involved in research and technology development (RTD), scientific potential of NAS PV community, PV activities carried out in NAS countries, PV policies and support mechanisms, achievements and barriers, challenges and needs to the development of PV in the NAS. (authors)

The Activity of Carbohydrate-Degrading Enzymes in the Development of Brood and Newly Emerged workers and Drones of the Carniolan Honeybee, Apis mellifera carnica

OpenAIRE

Żółtowska, Krystyna; Lipiński, Zbigniew; Łopieńska-Biernat, Elżbieta; Farjan, Marek; Dmitryjuk, Małgorzata

2012-01-01

The activity of glycogen Phosphorylase and carbohydrate hydrolyzing enzymes α-amylase, glucoamylase, trehalase, and sucrase was studied in the development of the Carniolan honey bee, Apis mellifera carnica Pollman (Hymenoptera: Apidae), from newly hatched larva to freshly emerged imago of worker and drone. Phosphorolytic degradation of glycogen was significantly stronger than hydrolytic degradation in all developmental stages. Developmental profiles of hydrolase activity were similar in both ...

Cardiac imaging: working towards fully-automated machine analysis & interpretation.

Science.gov (United States)

Slomka, Piotr J; Dey, Damini; Sitek, Arkadiusz; Motwani, Manish; Berman, Daniel S; Germano, Guido

2017-03-01

Non-invasive imaging plays a critical role in managing patients with cardiovascular disease. Although subjective visual interpretation remains the clinical mainstay, quantitative analysis facilitates objective, evidence-based management, and advances in clinical research. This has driven developments in computing and software tools aimed at achieving fully automated image processing and quantitative analysis. In parallel, machine learning techniques have been used to rapidly integrate large amounts of clinical and quantitative imaging data to provide highly personalized individual patient-based conclusions. Areas covered: This review summarizes recent advances in automated quantitative imaging in cardiology and describes the latest techniques which incorporate machine learning principles. The review focuses on the cardiac imaging techniques which are in wide clinical use. It also discusses key issues and obstacles for these tools to become utilized in mainstream clinical practice. Expert commentary: Fully-automated processing and high-level computer interpretation of cardiac imaging are becoming a reality. Application of machine learning to the vast amounts of quantitative data generated per scan and integration with clinical data also facilitates a move to more patient-specific interpretation. These developments are unlikely to replace interpreting physicians but will provide them with highly accurate tools to detect disease, risk-stratify, and optimize patient-specific treatment. However, with each technological advance, we move further from human dependence and closer to fully-automated machine interpretation.

Three-dimensional quantification of cardiac surface motion: a newly developed three-dimensional digital motion-capture and reconstruction system for beating heart surgery.

Science.gov (United States)

Watanabe, Toshiki; Omata, Sadao; Odamura, Motoki; Okada, Masahumi; Nakamura, Yoshihiko; Yokoyama, Hitoshi

2006-11-01

This study aimed to evaluate our newly developed 3-dimensional digital motion-capture and reconstruction system in an animal experiment setting and to characterize quantitatively the three regional cardiac surface motions, in the left anterior descending artery, right coronary artery, and left circumflex artery, before and after stabilization using a stabilizer. Six pigs underwent a full sternotomy. Three tiny metallic markers (diameter 2 mm) coated with a reflective material were attached on three regional cardiac surfaces (left anterior descending, right coronary, and left circumflex coronary artery regions). These markers were captured by two high-speed digital video cameras (955 frames per second) as 2-dimensional coordinates and reconstructed to 3-dimensional data points (about 480 xyz-position data per second) by a newly developed computer program. The remaining motion after stabilization ranged from 0.4 to 1.01 mm at the left anterior descending, 0.91 to 1.52 mm at the right coronary artery, and 0.53 to 1.14 mm at the left circumflex regions. Significant differences before and after stabilization were evaluated in maximum moving velocity (left anterior descending 456.7 +/- 178.7 vs 306.5 +/- 207.4 mm/s; right coronary artery 574.9 +/- 161.7 vs 446.9 +/- 170.7 mm/s; left circumflex 578.7 +/- 226.7 vs 398.9 +/- 192.6 mm/s; P heart surface movement. This helps us better understand the complexity of the heart, its motion, and the need for developing a better stabilizer for beating heart surgery.

Development of a fully automated adaptive unsharp masking technique in digital chest radiograph

International Nuclear Information System (INIS)

Abe, Katsumi; Katsuragawa, Shigehiko; Sasaki, Yasuo

1991-01-01

We are developing a fully automated adaptive unsharp masking technique with various parameters depending on regional image features of a digital chest radiograph. A chest radiograph includes various regions such as lung fields, retrocardiac area and spine in which their texture patterns and optical densities are extremely different. Therefore, it is necessary to enhance image contrast of each region by each optimum parameter. First, we investigated optimum weighting factors and mask sizes of unsharp masking technique in a digital chest radiograph. Then, a chest radiograph is automatically divided into three segments, one for the lung field, one for the retrocardiac area, and one for the spine, by using histogram analysis of pixel values. Finally, high frequency components of the lung field and retrocardiac area are selectively enhanced with a small mask size and mild weighting factors which are previously determined as optimum parameters. In addition, low frequency components of the spine are enhanced with a large mask size and adequate weighting factors. This processed image shows excellent depiction of the lung field, retrocardiac area and spine simultaneously with optimum contrast. Our image processing technique may be useful for diagnosis of chest radiographs. (author)

A model for mentoring newly-appointed nurse educators in nursing education institutions in South Africa.

Science.gov (United States)

Seekoe, Eunice

2014-04-24

South Africa transformed higher education through the enactment of the Higher Education Act (No. 101 of 1997). The researcher identified the need to develop a model for the mentoring of newly-appointed nurse educators in nursing education institutions in South Africa.  To develop and describe the model for mentoring newly-appointed nurse educators in nursing education institutions in South Africa.  A qualitative and theory-generating design was used (following empirical findings regarding needs analysis) in order to develop the model. The conceptualisation of the framework focused on the context, content, process and the theoretical domains that influenced the model. Ideas from different theories were borrowed from and integrated with the literature and deductive and inductive strategies were applied.  The structure of the model is multidimensional and complex in nature (macro, mesoand micro) based on the philosophy of reflective practice, competency-based practice andcritical learning theories. The assumptions are in relation to stakeholders, context, mentoring, outcome, process and dynamic. The stakeholders are the mentor and mentee within an interactive participatory relationship. The mentoring takes place within the process with a sequence of activities such as relationship building, development, engagement, reflective process and assessment. Capacity building and empowerment are outcomes of mentoring driven by motivation.  The implication for nurse managers is that the model can be used to develop mentoring programmes for newly-appointed nurse educators.

RELATIONSHIP BETWEEN DIFFERENT ALLOGAMIC ASSOCIATED TRAIT CHARACTERISTICS OF THE FIVE NEWLY DEVELOPED CYTOPLASMIC MALE STERILE (CMS LINES IN RICE

Directory of Open Access Journals (Sweden)

Nematzadeh GHORBAN ALI

2006-10-01

Full Text Available Five suitable maintainer varieties were identifi ed through testcrosses with IR58025A and the transfer of wild abortive cytoplasm was carried out by seven successive backcrosses. Five new CMS lines were developed by this approach in well adapted high yielding improved varietal background such as ‘Nemat’, ‘Neda’, ‘Dasht’, ‘Amol3’ and ‘Champa’. Agronomical characterization and allogamy-associated traits of the fi ve newly developed CMS lines were studied for their interrelationship. Anther length had a signifi cant positive correlation with the duration of glume opening (0.759 and high correlation of (0.698 with the angle between lemma and palea. The results indicated that ‘Nemat’ A, ‘Neda’ A, ‘Dasht’ A are more suitable as parents for hybrid seed production due to their favorable and superior fl oral characteristics in comparison to IR58025A.

Clinical Prediction Model for Time in Therapeutic Range While on Warfarin in Newly Diagnosed Atrial Fibrillation.

Science.gov (United States)

Williams, Brent A; Evans, Michael A; Honushefsky, Ashley M; Berger, Peter B

2017-10-12

Though warfarin has historically been the primary oral anticoagulant for stroke prevention in newly diagnosed atrial fibrillation (AF), several new direct oral anticoagulants may be preferred when anticoagulation control with warfarin is expected to be poor. This study developed a prediction model for time in therapeutic range (TTR) among newly diagnosed AF patients on newly initiated warfarin as a tool to assist decision making between warfarin and direct oral anticoagulants. This electronic medical record-based, retrospective study included newly diagnosed, nonvalvular AF patients with no recent warfarin exposure receiving primary care services through a large healthcare system in rural Pennsylvania. TTR was estimated as the percentage of time international normalized ratio measurements were between 2.0 and 3.0 during the first year following warfarin initiation. Candidate predictors of TTR were chosen from data elements collected during usual clinical care. A TTR prediction model was developed and temporally validated and its predictive performance was compared with the SAMe-TT 2 R 2 score (sex, age, medical history, treatment, tobacco, race) using R 2 and c-statistics. A total of 7877 newly diagnosed AF patients met study inclusion criteria. Median (interquartile range) TTR within the first year of starting warfarin was 51% (32, 67). Of 85 candidate predictors evaluated, 15 were included in the final validated model with an R 2 of 15.4%. The proposed model showed better predictive performance than the SAMe-TT 2 R 2 score ( R 2 =3.0%). The proposed prediction model may assist decision making on the proper mode of oral anticoagulant among newly diagnosed AF patients. However, predicting TTR on warfarin remains challenging. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

A Fully Automated Diabetes Prevention Program, Alive-PD: Program Design and Randomized Controlled Trial Protocol.

Science.gov (United States)

Block, Gladys; Azar, Kristen Mj; Block, Torin J; Romanelli, Robert J; Carpenter, Heather; Hopkins, Donald; Palaniappan, Latha; Block, Clifford H

2015-01-21

In the United States, 86 million adults have pre-diabetes. Evidence-based interventions that are both cost effective and widely scalable are needed to prevent diabetes. Our goal was to develop a fully automated diabetes prevention program and determine its effectiveness in a randomized controlled trial. Subjects with verified pre-diabetes were recruited to participate in a trial of the effectiveness of Alive-PD, a newly developed, 1-year, fully automated behavior change program delivered by email and Web. The program involves weekly tailored goal-setting, team-based and individual challenges, gamification, and other opportunities for interaction. An accompanying mobile phone app supports goal-setting and activity planning. For the trial, participants were randomized by computer algorithm to start the program immediately or after a 6-month delay. The primary outcome measures are change in HbA1c and fasting glucose from baseline to 6 months. The secondary outcome measures are change in HbA1c, glucose, lipids, body mass index (BMI), weight, waist circumference, and blood pressure at 3, 6, 9, and 12 months. Randomization and delivery of the intervention are independent of clinic staff, who are blinded to treatment assignment. Outcomes will be evaluated for the intention-to-treat and per-protocol populations. A total of 340 subjects with pre-diabetes were randomized to the intervention (n=164) or delayed-entry control group (n=176). Baseline characteristics were as follows: mean age 55 (SD 8.9); mean BMI 31.1 (SD 4.3); male 68.5%; mean fasting glucose 109.9 (SD 8.4) mg/dL; and mean HbA1c 5.6 (SD 0.3)%. Data collection and analysis are in progress. We hypothesize that participants in the intervention group will achieve statistically significant reductions in fasting glucose and HbA1c as compared to the control group at 6 months post baseline. The randomized trial will provide rigorous evidence regarding the efficacy of this Web- and Internet-based program in reducing or

The activity of carbohydrate-degrading enzymes in the development of brood and newly emerged workers and drones of the Carniolan honeybee, Apis mellifera carnica.

Science.gov (United States)

Żółtowska, Krystyna; Lipiński, Zbigniew; Łopieńska-Biernat, Elżbieta; Farjan, Marek; Dmitryjuk, Małgorzata

2012-01-01

The activity of glycogen Phosphorylase and carbohydrate hydrolyzing enzymes α-amylase, glucoamylase, trehalase, and sucrase was studied in the development of the Carniolan honey bee, Apis mellifera carnica Pollman (Hymenoptera: Apidae), from newly hatched larva to freshly emerged imago of worker and drone. Phosphorolytic degradation of glycogen was significantly stronger than hydrolytic degradation in all developmental stages. Developmental profiles of hydrolase activity were similar in both sexes of brood; high activity was found in unsealed larvae, the lowest in prepupae followed by an increase in enzymatic activity. Especially intensive increases in activity occurred in the last stage of pupae and newly emerged imago. Besides α-amylase, the activities of other enzymes were higher in drone than in worker broods. Among drones, activity of glucoamylase was particularly high, ranging from around three times higher in the youngest larvae to 13 times higher in the oldest pupae. This confirms earlier suggestions about higher rates of metabolism in drone broods than in worker broods.

Confidence in leadership among the newly qualified.

Science.gov (United States)

Bayliss-Pratt, Lisa; Morley, Mary; Bagley, Liz; Alderson, Steven

2013-10-23

The Francis report highlighted the importance of strong leadership from health professionals but it is unclear how prepared those who are newly qualified feel to take on a leadership role. We aimed to assess the confidence of newly qualified health professionals working in the West Midlands in the different competencies of the NHS Leadership Framework. Most respondents felt confident in their abilities to demonstrate personal qualities and work with others, but less so at managing or improving services or setting direction.

Development of a fully-coupled, all atates, all hazards level 2 PSA at leibstadt nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Zvoncek, Pavol; Nusbaumer, Olivier [Safety Compliance and Technical Support Department, Leibstadt Nuclear Power Plant, Leibstadt (Sweden); Torri, Alfred [Risk Management Associates, Inc., Encinitas (United States)

2017-03-15

This paper describes the development process, the innovative techniques used and insights gained from the latest integrated, full scope, multistate Level 2 PSA analysis conducted at the Leibstadt Nuclear Power Plant (KKL), Switzerland. KKL is a modern single-unit General Electric Boiling Water Reactor (BWR/6) with Mark III Containment, and a power output of 3600MWth/1200MWe, the highest among the five operating reactors in Switzerland. A Level 2 Probabilistic Safety Assessment (PSA) analyses accident phenomena in nuclear power plants, identifies ways in which radioactive releases from plants can occur and estimates release pathways, magnitude and frequency. This paper attempts to give an overview of the advanced modeling techniques that have been developed and implemented for the recent KKL Level 2 PSA update, with the aim of systematizing the analysis and modeling processes, as well as complying with the relatively prescriptive Swiss requirements for PSA. The analysis provides significant insights into the absolute and relative importance of risk contributors and accident prevention and mitigation measures. Thanks to several newly developed techniques and an integrated approach, the KKL Level 2 PSA report exhibits a high degree of reviewability and maintainability, and transparently highlights the most important risk contributors to Large Early Release Frequency (LERF) with respect to initiating events, components, operator actions or seismic component failure probabilities (fragilities)

Fatigue associated with newly approved vascular endothelial growth factor receptor tyrosine kinase inhibitors in cancer patients: an up-to-date meta-analysis.

Science.gov (United States)

Li, Jing; Gu, Jian

2017-10-01

The fatigue associated with five newly approved vascular endothelial growth factor receptor tyrosine kinase inhibitors (VEGFR-TKIs) (regorafenib, vandetanib, cabozantinib, lenvatinib, axitinib) is poorly understood. We conducted this systematic review to fully investigate the fatigue associated with these VEGFR-TKIs in cancer patients. Relevant studies of randomized controlled trials in cancer patients treated with the five VEGFR-TKIs were retrieved and a systematic evaluation was conducted. EMBASE, MEDLINE, and PubMed were searched for articles published until March 2017. Thirteen randomized controlled trials and 4395 patients were included. The current analysis suggested that the use of five newly approved VEGFR-TKIs increased the risk of all-grade fatigue (1.43; 95% CI 1.23-1.66; p fatigue (1.97; 95% CI1.44-2.70; p fatigue varied significantly within drug type, but high-grade fatigue did not. The RR of all-grade and high-grade fatigue did not vary significantly according to cancer type, treatment line, and treatment duration. The risk of high-grade fatigue may vary with treatment duration, whereas all-grade fatigue may not. The available data suggest that the use of the five newly approved VEGFR-TKIs is associated with a significantly increased risk of fatigue in cancer patients. Physicians should be aware of this adverse effect and should monitor cancer patients receiving these drugs.

Embedding complex hydrology in the climate system - towards fully coupled climate-hydrology models

DEFF Research Database (Denmark)

Butts, M.; Rasmussen, S.H.; Ridler, M.

2013-01-01

Motivated by the need to develop better tools to understand the impact of future management and climate change on water resources, we present a set of studies with the overall aim of developing a fully dynamic coupling between a comprehensive hydrological model, MIKE SHE, and a regional climate...... distributed parameters using satellite remote sensing. Secondly, field data are used to investigate the effects of model resolution and parameter scales for use in a coupled model. Finally, the development of the fully coupled climate-hydrology model is described and some of the challenges associated...... with coupling models for hydrological processes on sub-grid scales of the regional climate model are presented....

A model for mentoring newly-appointed nurse educators in nursing education institutions in South Africa

Directory of Open Access Journals (Sweden)

Eunice Seekoe

2014-02-01

Full Text Available Background: South Africa transformed higher education through the enactment of the Higher Education Act (No. 101 of 1997. The researcher identified the need to develop a model for the mentoring of newly-appointed nurse educators in nursing education institutions in South Africa. Objectives: To develop and describe the model for mentoring newly-appointed nurse educators in nursing education institutions in South Africa. Method: A qualitative and theory-generating design was used (following empirical findings regarding needs analysis in order to develop the model. The conceptualisation of the framework focused on the context, content, process and the theoretical domains that influenced the model. Ideas from different theories were borrowed from and integrated with the literature and deductive and inductive strategies were applied. Results: The structure of the model is multidimensional and complex in nature (macro, mesoand micro based on the philosophy of reflective practice, competency-based practice andcritical learning theories. The assumptions are in relation to stakeholders, context, mentoring, outcome, process and dynamic. The stakeholders are the mentor and mentee within an interactive participatory relationship. The mentoring takes place within the process with a sequence of activities such as relationship building, development, engagement, reflective process and assessment. Capacity building and empowerment are outcomes of mentoring driven by motivation. Conclusion: The implication for nurse managers is that the model can be used to develop mentoring programmes for newly-appointed nurse educators.

Los Alamos Plutonium Facility newly generated TRU waste certification

International Nuclear Information System (INIS)

Gruetzmacher, K.; Montoya, A.; Sinkule, B.; Maez, M.

1997-01-01

This paper presents an overview of the activities being planned and implemented to certify newly generated contact handled transuranic (TRU) waste produced by Los Alamos National Laboratory's (LANL's) Plutonium Facility. Certifying waste at the point of generation is the most important cost and labor saving step in the WIPP certification process. The pedigree of a waste item is best known by the originator of the waste and frees a site from expensive characterization activities such as those associated with legacy waste. Through a cooperative agreement with LANLs Waste Management Facility and under the umbrella of LANLs WIPP-related certification and quality assurance documents, the Plutonium Facility will be certifying its own newly generated waste. Some of the challenges faced by the Plutonium Facility in preparing to certify TRU waste include the modification and addition of procedures to meet WIPP requirements, standardizing packaging for TRU waste, collecting processing documentation from operations which produce TRU waste, and developing ways to modify waste streams which are not certifiable in their present form

Phenology of Lymantria monacha (Lepidoptera:Lymantriidae) laboratory reared on spruce foliage or a newly developed artificial diet

Science.gov (United States)

Melody A. Keena; Alice Vandel; Oldrich. Pultar

2010-01-01

Lymantria monacha (L.) (Lepidoptera: Lymantriidae) is a Eurasian pest of conifers that has potential for accidental introduction into North America. The phenology over the entire life cycle for L. monacha individuals from the Czech Republic was compared on Picea glauca (Moench) Voss (white spruce) and a newly...

Problems faced by newly diagnosed diabetes mellitus patients at ...

African Journals Online (AJOL)

Diabetes mellitus can be a frightening experience for newly diagnosed patients. The aim of this study was to determine and describe the problems faced by newly diagnosed diabetes mellitus patients at primary healthcare facilities at Mopani district, Limpopo Province. A qualitative, descriptive and contextual research ...

Newly graduated nurses' use of knowledge sources in clinical decision-making

DEFF Research Database (Denmark)

Voldbjerg, Siri Lygum; Grønkjaer, Mette; Wiechula, Rick

2017-01-01

AIMS AND OBJECTIVES: To explore which knowledge sources newly graduated nurses' use in clinical decision-making and why and how they are used. BACKGROUND: In spite of an increased educational focus on skills and competencies within evidence based practice newly graduated nurses' ability to use...... approaches to strengthen the knowledgebase used in clinical decision-making. DESIGN AND METHODS: Ethnographic study using participant-observation and individual semi-structured interviews of nine Danish newly graduated nurses in medical and surgical hospital settings. RESULTS: Newly graduates use...... in clinical decision-making. If newly graduates are to be supported in an articulate and reflective use of a variety of sources, they have to be allocated to experienced nurses who model a reflective, articulate and balanced use of knowledge sources. This article is protected by copyright. All rights reserved....

Newly graduated nurses' occupational commitment and its associations with professional competence and work-related factors.

Science.gov (United States)

Numminen, Olivia; Leino-Kilpi, Helena; Isoaho, Hannu; Meretoja, Riitta

2016-01-01

To explore newly graduated nurses' occupational commitment and its associations with their self-assessed professional competence and other work-related factors. As a factor affecting nurse turnover, newly graduated nurses' occupational commitment and its associations with work-related factors needs exploring to retain adequate workforce. Nurses' commitment has mainly been studied as organisational commitment, but newly graduated nurses' occupational commitment and its association with work-related factors needs further studying. This study used descriptive, cross-sectional, correlation design. A convenience sample of 318 newly graduated nurses in Finland participated responding to an electronic questionnaire. Statistical software, NCSS version 9, was used in data analysis. Frequencies, percentages, ranges, means and standard deviations summarised the data. Multivariate Analyses of Variance estimated associations between occupational commitment and work-related variables. IBM SPSS Amos version 22 estimated the model fit of Occupational Commitment Scale and Nurse Competence Scale. Newly graduated nurses' occupational commitment was good, affective commitment reaching the highest mean score. There was a significant difference between the nurse groups in favour of nurses at higher competence levels in all subscales except in limited alternatives occupational commitment. Multivariate analyses revealed significant associations between subscales of commitment and competence, turnover intentions, job satisfaction, earlier professional education and work sector, competence counting only through affective dimension. The association between occupational commitment and low turnover intentions and satisfaction with nursing occupation was strong. Higher general competence indicated higher overall occupational commitment. Managers' recognition of the influence of all dimensions of occupational commitment in newly graduated nurses' professional development is important. Follow

Statistical symmetry restoration in fully developed turbulence: Renormalization group analysis of two models

Science.gov (United States)

Antonov, N. V.; Gulitskiy, N. M.; Kostenko, M. M.; Malyshev, A. V.

2018-03-01

In this paper we consider the model of incompressible fluid described by the stochastic Navier-Stokes equation with finite correlation time of a random force. Inertial-range asymptotic behavior of fully developed turbulence is studied by means of the field theoretic renormalization group within the one-loop approximation. It is corroborated that regardless of the values of model parameters and initial data the inertial-range behavior of the model is described by the limiting case of vanishing correlation time. This indicates that the Galilean symmetry of the model violated by the "colored" random force is restored in the inertial range. This regime corresponds to the only nontrivial fixed point of the renormalization group equation. The stability of this point depends on the relation between the exponents in the energy spectrum E ∝k1 -y and the dispersion law ω ∝k2 -η . The second analyzed problem is the passive advection of a scalar field by this velocity ensemble. Correlation functions of the scalar field exhibit anomalous scaling behavior in the inertial-convective range. We demonstrate that in accordance with Kolmogorov's hypothesis of the local symmetry restoration the main contribution to the operator product expansion is given by the isotropic operator, while anisotropic terms should be considered only as corrections.

Ethical climate and nurse competence - newly graduated nurses' perceptions.

Science.gov (United States)

Numminen, Olivia; Leino-Kilpi, Helena; Isoaho, Hannu; Meretoja, Riitta

2015-12-01

is also a need for knowledge of newly graduated nurses' views of factors which act as enhancers or barriers to positive ethical climates to develop. Interventions, continuing education courses, and discussions designed to promote positive ethical climates should be developed for managers, nurses, and multi-professional teams. © The Author(s) 2014.

Practices influenced by policy? An exploration of newly hired science teachers at sites in South Africa and the United States

Science.gov (United States)

Navy, S. L.; Luft, J. A.; Toerien, R.; Hewson, P. W.

2018-05-01

In many parts of the world, newly hired science teachers' practices are developing in a complex policy environment. However, little is known about how newly hired science teachers' practices are enacted throughout a cycle of instruction and how these practices can be influenced by macro-, meso-, and micro-policies. Knowing how policies impact practice can result in better policies or better support for certain policies in order to enhance the instruction of newly hired teachers. This comparative study investigated how 12 newly hired science teachers at sites in South Africa (SA) and the United States (US) progressed through an instructional cycle of planning, teaching, and reflection. The qualitative data were analysed through beginning teacher competency frameworks, the cycle of instruction, and institutional theory. Data analysis revealed prevailing areas of practice and connections to levels of policy within the instructional cycle phases. There were some differences between the SA and US teachers and among first-, second-, and third-year teachers. More importantly, this study indicates that newly hired teachers are susceptible to micro-policies and are progressively developing their practice. It also shows the importance of meso-level connectors. It suggests that teacher educators and policy makers must consider how to prepare and support newly hired science teachers to achieve the shared global visions of science teaching.

NEWLY-PACKAGED BALI TOURIST PERFORMING ARTS IN THE PERSPECTIVE OF CULTURAL STUDIES

Directory of Open Access Journals (Sweden)

Ni Made Ruastiti

2012-11-01

Full Text Available This research is focused on the newly packaged tourist performing arts; they are anew concept and seem to be different from the general tourist performing arts. They arepackaged from various components of Balinese arts and managed as large scale-touristperforming arts in terms of materials, space, and time of their performances. The researchercalls them new types of Bali tourist performing arts because how they are presented isnew and different from the traditional tourist performing arts which are simply performed.In this research, the newly-packaged performing arts are analyzed in the perspective ofcultural studies.The research was carried out at three palaces in Bali; they are Mengwi Palace inBadung regency, Anyar Palace at Kerambitan, Tabanan regency, and Banyuning Palace atBongkasa, Badung regency. There are three main problems to be discussed: firstly, how dothe tourist performing arts emerge in all the palaces? Secondly, are they related to thetourist industry developed in the palaces?, thirdly, what is the impact and meaning of themfor the sake of the palaces, society, and Balinese culture? The researcher uses a qualitativemethod and an interdisciplinary approach as characteristics of cultural studies. The theoriesused are hegemony, deconstruction, and structuration.The result shows that the tourism development at all the palaces has made the localsociety become more critical. The money-oriented economy based on the spirit of gettingbenefit has made the emergence of comodification in all sectors of life. The emergence oftourist industry at the palaces has led to the idea of showing all of the useful art and culturalpotentials which at the palaces and their surroundings. Theoretically, the palaces can bestated to have deconstructed the concept of presenting the Bali tourist performing arts into anew one, that is, “the newly packaged Bali tourist performing arts”.It has been observed that all the palaces have developed t “Newly

Efficacy of Intra-articular Injection of a Newly Developed Plasma Rich in Growth Factor (PRGF) Versus Hyaluronic Acid on Pain and Function of Patients with Knee Osteoarthritis: A Single-Blinded Randomized Clinical Trial.

Science.gov (United States)

Raeissadat, Seyed Ahmad; Rayegani, Seyed Mansoor; Ahangar, Azadeh Gharooee; Abadi, Porya Hassan; Mojgani, Parviz; Ahangar, Omid Gharooi

2017-01-01

Knee osteoarthritis is the most common joint disease. We aimed to compare the efficacy and safety of intra-articular injection of a newly developed plasma rich in growth factor (PRGF) versus hyaluronic acid (HA) on pain and function of patients with knee osteoarthritis. In this single-blinded randomized clinical trial, patients with symptomatic osteoarthritis of knee were assigned to receive 2 intra-articular injections of our newly developed PRGF in 3 weeks or 3 weekly injections of HA. Our primary outcome was the mean change from baseline until 2 and 6 months post intervention in scores of visual analog scale, Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), and Lequesne index. We used analysis of variance for repeated-measures statistical test. A total of 69 patients entered final analysis. The mean age of patients was 58.2 ± 7.41 years and 81.2% were women. In particular, total WOMAC index decreased from 42.9 ± 13.51 to 26.8 ± 13.45 and 24.4 ± 16.54 at 2 and 6 months in the newly developed PRGF group (within subjects P  = .001), and from 38.8 ± 12.62 to 27.8 ± 11.01 and 27.4 ± 11.38 at 2 and 6 months in the HA group (within subjects P  = .001), respectively (between subjects P  = .631). There was no significant difference between PRGF and HA groups in patients' satisfaction and minor complications of injection, whereas patients in HA group reported significantly lower injection-induced pain. In 6 months follow up, our newly developed PRGF and HA, both are effective options to decrease pain and improvement of function in patients with symptomatic mild to moderate knee osteoarthritis.

[Bioethical analysis of the use of newly dead patients in medical learning].

Science.gov (United States)

Gomes, Andréia Patrícia; Rego, Sergio; Palácios, Marisa; Siqueira-Batista, Rodrigo

2010-01-01

The purpose of this article is to carry out, a discussion on the subject of bioethics and cadavers based upon a critic review of literature. A review of literature, was made with a survey of articles between 1977 and 2007 in the sites 'Biblioteca Virtual de Saúde', PubMed and SciElo, utilizing the keywords: newly deceased patients, newly dead patients, simulators,. This was complemented by a critical evaluation of books published in the area of ethics and bioethics. The possibility to develop learning without orientation by a supervisor is doubtful.. The utilization of newly dead for learning invasive procedures is very frequent and seldom admitted. These procedures, are usually, carried out secretly, without the knowledge and consent of the family. The ethical aspects of these practices are not discussed in the practical medical education. It essential that the ethics of use of recent deceased become a necessary content of graduate education. Performance of these procedures by students should always be authorized by family members. The simulators meet the requirements of training. Discussions about the ethical and bioethical aspects cannot be separated from practical considerations during the students learning time.

Fully implicit 1D radiation hydrodynamics: Validation and verification

International Nuclear Information System (INIS)

Ghosh, Karabi; Menon, S.V.G.

2010-01-01

A fully implicit finite difference scheme has been developed to solve the hydrodynamic equations coupled with radiation transport. Solution of the time-dependent radiation transport equation is obtained using the discrete ordinates method and the energy flow into the Lagrangian meshes as a result of radiation interaction is fully accounted for. A tridiagonal matrix system is solved at each time step to determine the hydrodynamic variables implicitly. The results obtained from this fully implicit radiation hydrodynamics code in the planar geometry agrees well with the scaling law for radiation driven strong shock propagation in aluminium. For the point explosion problem the self similar solutions are compared with results for pure hydrodynamic case in spherical geometry. Results obtained when radiation interaction is also accounted agree with those of point explosion with heat conduction for lower input energies. Having, thus, benchmarked the code, self convergence of the method w.r.t. time step is studied in detail for both the planar and spherical problems. Spatial as well as temporal convergence rates are ≅1 as expected from the difference forms of mass, momentum and energy conservation equations. This shows that the asymptotic convergence rate of the code is realized properly.

Code development for analysis of MHD pressure drop reduction in a liquid metal blanket using insulation technique based on a fully developed flow model

International Nuclear Information System (INIS)

Smolentsev, Sergey; Morley, Neil; Abdou, Mohamed

2005-01-01

The paper presents details of a new numerical code for analysis of a fully developed MHD flow in a channel of a liquid metal blanket using various insulation techniques. The code has specially been designed for channels with a 'sandwich' structure of several materials with different physical properties. The code includes a finite-volume formulation, automatically generated Hartmann number sensitive meshes, and effective convergence acceleration technique. Tests performed at Ha ∼ 10 4 have showed very good accuracy. As an illustration, two blanket flows have been considered: Pb-17Li flow in a channel with a silicon carbide flow channel insert, and Li flow in a channel with insulating coating

Demonstration of glucose-6-phosphate dehydrogenase in rat Kupffer cells by a newly-developed ultrastructural enzyme-cytochemistry

Directory of Open Access Journals (Sweden)

S Matsubara

2009-06-01

Full Text Available Although various tissue macrophages possess high glucose- 6-phosphate dehydrogenase (G6PD activity, which is reported to be closely associated with their phagocytotic/bactericidal function, the fine subcellular localization of this enzyme in liver resident macrophages (Kupffer cells has not been determined.We have investigated the subcellular localization of G6PD in Kupffer cells in rat liver, using a newly developed enzyme-cytochemical (copper-ferrocyanide method. Electron-dense precipitates indicating G6PD activity were clearly visible in the cytoplasm and on the cytosolic side of the endoplasmic reticulum of Kupffer cells. Cytochemical controls ensured specific detection of the enzymatic activity. Rat Kupffer cells abundantly possessed enzyme-cytochemically detectable G6PD activity. Kupffer cell G6PD may play a role in liver defense by delivering NADPH to NADPH-dependent enzymes. G6PD enzyme-cytochemistry may be a useful tool for the study of Kupffer cell functions.

R/D and implement of temper bead welding as newly developed maintenance technique in nuclear power plant

International Nuclear Information System (INIS)

Hirano, Shinro; Sera, Takehiko; Chigusa, Naoki; Okimura, Koji; Nishimoto, Kazutoshi

2011-01-01

Japanese government has recently addressed a policy to increase capacity factor of existing nuclear PPs to achieve the goal to decrease the emission of CO 2 . Numerous preventive measures have taken in nuclear power plants to minimize the risk of unexpected long shutdown. Newly developed mitigation measures or repair methods need to be qualified to satisfy regulatory standards, before it is implemented to nuclear power plants. The qualification process needs to comply regulatory standards though it may consume time to go through each of the required steps. This paper describes such cases namely ambient temper-bead welding and clarifies the issues that need to be resolved regarding qualification process. The qualification process for new methods that has not been prescribed in regulatory standards temporarily completed by go through confirm testing by JAPEIC, RNP and issuance of no action letter in rush. Currently, the qualification process can only be applied on limited area so generalized qualification process needs to be established. (author)

A fully integrated 16 channel digitally trimmed pulse shaping amplifier

International Nuclear Information System (INIS)

Hearn, W.E.; Wright, M.E.

1993-11-01

A fully integrated CMOS pulse shaping amplifier has been developed at LBL. All frequency dependent networks are included on the chip. Provision is made for tuning to compensate for process variations. The overall architecture and details of the circuitry are discussed. Test results are presented

10-GHz return-to-zero pulse source tunable in wavelength with a single- or multiwavelength output based on four-wave mixing in a newly developed highly nonlinear fiber

DEFF Research Database (Denmark)

Clausen, A. T.; Oxenlowe, L.; Peucheret, Christophe

2001-01-01

In this letter, a novel scheme for a wavelength-tunable pulse source (WTPS) is proposed and characterized. It is based on four-wave mixing (FWM) in a newly developed highly nonlinear fiber between a return-to-zero (RZ) pulsed signal at a fixed wavelength and a continuous wave probe tunable...

PREVALENCE OF SLEEP DISORDERED BREATHING IN PATIENTS WITH NEWLY DIAGNOSED ACROMEGALY

Directory of Open Access Journals (Sweden)

U. A. Tsoy

2014-01-01

Full Text Available Background: Obstructive sleep disordered breathing or obstructive sleep apnea (OSA is the most common respiratory impairment in acromegaly. OSA is bound up with heightened cardiovascular mortality. Aim: Тo study frequency, features, and structure of sleep disordered breathing in patients with newly diagnosed acromegaly and to elucidate the factors influencing their development. Materials and methods: 38 patients (10 men, 28 women, median age 53 (28-76 years, median body mass index (BMI 29 (19.9-44.3 kg/m² with newly diagnosed acromegaly were recruited into the study. All subjects underwent full polysomnography (Embla N7000, Natus, USA and Remlogica software (USA. Results: Sleep disordered breathing was found in 28 (73.7% patients. OSA was revealed in all cases, in 11 (39.3% subjects it was mixed. In 10 (35.7% patients OSA was mild, in 8 (28.6% moderate, and in 10 (35.7% severe. BMI (р<0.01, disease duration (р=0.003, and insulin-like growth factor-1 (IGF-1 level (р=0.04 were different in patients without OSA and patients with moderate-to-severe OSA. No difference was found in sex (р=0.4, age (р=0.064, and growth hormone level (р=0.6. Frequency of arterial hypertension, diabetes mellitus, and other glucose metabolism impairments was the same in subjects without OSA and with severe-to-moderate OSA. Conclusion: All patients with newly diagnosed acromegaly should undergo polysomnography. BMI, disease duration, and IGF-1 level are significant risk factors for OSA development. Correlation OSA with arterial hypertension and glucose metabolism impairments needs to be further investigated.

Application of a newly developed software program for image quality assessment in cone-beam computed tomography.

Science.gov (United States)

de Oliveira, Marcus Vinicius Linhares; Santos, António Carvalho; Paulo, Graciano; Campos, Paulo Sergio Flores; Santos, Joana

2017-06-01

The purpose of this study was to apply a newly developed free software program, at low cost and with minimal time, to evaluate the quality of dental and maxillofacial cone-beam computed tomography (CBCT) images. A polymethyl methacrylate (PMMA) phantom, CQP-IFBA, was scanned in 3 CBCT units with 7 protocols. A macro program was developed, using the free software ImageJ, to automatically evaluate the image quality parameters. The image quality evaluation was based on 8 parameters: uniformity, the signal-to-noise ratio (SNR), noise, the contrast-to-noise ratio (CNR), spatial resolution, the artifact index, geometric accuracy, and low-contrast resolution. The image uniformity and noise depended on the protocol that was applied. Regarding the CNR, high-density structures were more sensitive to the effect of scanning parameters. There were no significant differences between SNR and CNR in centered and peripheral objects. The geometric accuracy assessment showed that all the distance measurements were lower than the real values. Low-contrast resolution was influenced by the scanning parameters, and the 1-mm rod present in the phantom was not depicted in any of the 3 CBCT units. Smaller voxel sizes presented higher spatial resolution. There were no significant differences among the protocols regarding artifact presence. This software package provided a fast, low-cost, and feasible method for the evaluation of image quality parameters in CBCT.

Application of a newly developed software program for image quality assessment in cone-beam computed tomography

International Nuclear Information System (INIS)

De Oliveira, Marcus Vinicius Linhares; Campos, Paulo Sergio Flores; Paulo, Graciano; Santos, Antonio Carvalho; Santos, Joana

2017-01-01

The purpose of this study was to apply a newly developed free software program, at low cost and with minimal time, to evaluate the quality of dental and maxillofacial cone-beam computed tomography (CBCT) images. A polymethyl methacrylate (PMMA) phantom, CQP-IFBA, was scanned in 3 CBCT units with 7 protocols. A macro program was developed, using the free software ImageJ, to automatically evaluate the image quality parameters. The image quality evaluation was based on 8 parameters: uniformity, the signal-to-noise ratio (SNR), noise, the contrast-to-noise ratio (CNR), spatial resolution, the artifact index, geometric accuracy, and low-contrast resolution. The image uniformity and noise depended on the protocol that was applied. Regarding the CNR, high-density structures were more sensitive to the effect of scanning parameters. There were no significant differences between SNR and CNR in centered and peripheral objects. The geometric accuracy assessment showed that all the distance measurements were lower than the real values. Low-contrast resolution was influenced by the scanning parameters, and the 1-mm rod present in the phantom was not depicted in any of the 3 CBCT units. Smaller voxel sizes presented higher spatial resolution. There were no significant differences among the protocols regarding artifact presence. This software package provided a fast, low-cost, and feasible method for the evaluation of image quality parameters in CBCT

Application of a newly developed software program for image quality assessment in cone-beam computed tomography

Energy Technology Data Exchange (ETDEWEB)

De Oliveira, Marcus Vinicius Linhares; Campos, Paulo Sergio Flores [Federal Institute of Bahia, Salvador (Brazil); Paulo, Graciano; Santos, Antonio Carvalho; Santos, Joana [Coimbra Health School, Polytechnic Institute of Coimbra, Coimbra (Portugal)

2017-06-15

The purpose of this study was to apply a newly developed free software program, at low cost and with minimal time, to evaluate the quality of dental and maxillofacial cone-beam computed tomography (CBCT) images. A polymethyl methacrylate (PMMA) phantom, CQP-IFBA, was scanned in 3 CBCT units with 7 protocols. A macro program was developed, using the free software ImageJ, to automatically evaluate the image quality parameters. The image quality evaluation was based on 8 parameters: uniformity, the signal-to-noise ratio (SNR), noise, the contrast-to-noise ratio (CNR), spatial resolution, the artifact index, geometric accuracy, and low-contrast resolution. The image uniformity and noise depended on the protocol that was applied. Regarding the CNR, high-density structures were more sensitive to the effect of scanning parameters. There were no significant differences between SNR and CNR in centered and peripheral objects. The geometric accuracy assessment showed that all the distance measurements were lower than the real values. Low-contrast resolution was influenced by the scanning parameters, and the 1-mm rod present in the phantom was not depicted in any of the 3 CBCT units. Smaller voxel sizes presented higher spatial resolution. There were no significant differences among the protocols regarding artifact presence. This software package provided a fast, low-cost, and feasible method for the evaluation of image quality parameters in CBCT.

Newly Generated Liquid Waste Processing Alternatives Study, Volume 1

Energy Technology Data Exchange (ETDEWEB)

Landman, William Henry; Bates, Steven Odum; Bonnema, Bruce Edward; Palmer, Stanley Leland; Podgorney, Anna Kristine; Walsh, Stephanie

2002-09-01

This report identifies and evaluates three options for treating newly generated liquid waste at the Idaho Nuclear Technology and Engineering Center of the Idaho National Engineering and Environmental Laboratory. The three options are: (a) treat the waste using processing facilities designed for treating sodium-bearing waste, (b) treat the waste using subcontractor-supplied mobile systems, or (c) treat the waste using a special facility designed and constructed for that purpose. In studying these options, engineers concluded that the best approach is to store the newly generated liquid waste until a sodium-bearing waste treatment facility is available and then to co-process the stored inventory of the newly generated waste with the sodium-bearing waste. After the sodium-bearing waste facility completes its mission, two paths are available. The newly generated liquid waste could be treated using the subcontractor-supplied system or the sodium-bearing waste facility or a portion of it. The final decision depends on the design of the sodium-bearing waste treatment facility, which will be completed in coming years.

Equipment for fully homologous bulb turbine model testing in Laval University

International Nuclear Information System (INIS)

Fraser R; Vallée D; Jean Y; Deschênes C

2014-01-01

Within the context of liberalisation of the energy market, hydroelectricity remains a first class source of clean and renewable energy. Combining the growing demand of energy, its increasing value and the appreciation associated to the sustainable development, low head sites formerly considered as non-profitable are now exploitable. Bulb turbines likely to equip such sites are traditionally developed on model using right angle transmission leading to piers enlargement for power take off shaft passage, thus restricting possibilities to have fully homologous hydraulic passages. Aiming to sustain good quality development on fully homologous scale model of bulb turbines, the Hydraulic Machines Laboratory (LAMH) of Laval University has developed a brake with an enhanced power to weight ratio. This powerful brake is small enough to be located in the bulb shell while dissipating power without mandatory test head reduction. This paper first presents the basic technology of this brake and its application. Then both its main performance capabilities and dimensional characteristics will be detailed. The instrumentation used to perform accurate measurements will be finally presented

A genomic audit of newly-adopted autosomal STRs for forensic identification.

Science.gov (United States)

Phillips, C

2017-07-01

In preparation for the growing use of massively parallel sequencing (MPS) technology to genotype forensic STRs, a comprehensive genomic audit of 73 STRs was made in 2016 [Parson et al., Forensic Sci. Int. Genet. 22, 54-63]. The loci examined included miniSTRs that were not in widespread use, but had been incorporated into MPS kits or were under consideration for this purpose. The current study expands the genomic analysis of autosomal STRs that are not commonly used, to include the full set of developed miniSTRs and an additional 24 STRs, most of which have been recently included in several supplementary forensic multiplex kits for capillary electrophoresis. The genomic audit of these 47 newly-adopted STRs examined the linkage status of new loci on the same chromosome as established forensic STRs; analyzed world-wide population variation of the newly-adopted STRs using published data; assessed their forensic informativeness; and compiled the sequence characteristics, repeat structures and flanking regions of each STR. A further 44 autosomal STRs developed for forensic analyses but not incorporated into commercial kits, are also briefly described. Copyright © 2017 Elsevier B.V. All rights reserved.

Explicit and implicit springback simulation in sheet metal forming using fully coupled ductile damage and distortional hardening model

Science.gov (United States)

Yetna n'jock, M.; Houssem, B.; Labergere, C.; Saanouni, K.; Zhenming, Y.

2018-05-01

The springback is an important phenomenon which accompanies the forming of metallic sheets especially for high strength materials. A quantitative prediction of springback becomes very important for newly developed material with high mechanical characteristics. In this work, a numerical methodology is developed to quantify this undesirable phenomenon. This methodoly is based on the use of both explicit and implicit finite element solvers of Abaqus®. The most important ingredient of this methodology consists on the use of highly predictive mechanical model. A thermodynamically-consistent, non-associative and fully anisotropic elastoplastic constitutive model strongly coupled with isotropic ductile damage and accounting for distortional hardening is then used. An algorithm for local integration of the complete set of the constitutive equations is developed. This algorithm considers the rotated frame formulation (RFF) to ensure the incremental objectivity of the model in the framework of finite strains. This algorithm is implemented in both explicit (Abaqus/Explicit®) and implicit (Abaqus/Standard®) solvers of Abaqus® through the users routine VUMAT and UMAT respectively. The implicit solver of Abaqus® has been used to study spingback as it is generally a quasi-static unloading. In order to compare the methods `efficiency, the explicit method (Dynamic Relaxation Method) proposed by Rayleigh has been also used for springback prediction. The results obtained within U draw/bending benchmark are studied, discussed and compared with experimental results as reference. Finally, the purpose of this work is to evaluate the reliability of different methods predict efficiently springback in sheet metal forming.

A novel fully integrated handheld gamma camera

International Nuclear Information System (INIS)

Massari, R.; Ucci, A.; Campisi, C.; Scopinaro, F.; Soluri, A.

2016-01-01

In this paper, we present an innovative, fully integrated handheld gamma camera, namely designed to gather in the same device the gamma ray detector with the display and the embedded computing system. The low power consumption allows the prototype to be battery operated. To be useful in radioguided surgery, an intraoperative gamma camera must be very easy to handle since it must be moved to find a suitable view. Consequently, we have developed the first prototype of a fully integrated, compact and lightweight gamma camera for radiopharmaceuticals fast imaging. The device can operate without cables across the sterile field, so it may be easily used in the operating theater for radioguided surgery. The prototype proposed consists of a Silicon Photomultiplier (SiPM) array coupled with a proprietary scintillation structure based on CsI(Tl) crystals. To read the SiPM output signals, we have developed a very low power readout electronics and a dedicated analog to digital conversion system. One of the most critical aspects we faced designing the prototype was the low power consumption, which is mandatory to develop a battery operated device. We have applied this detection device in the lymphoscintigraphy technique (sentinel lymph node mapping) comparing the results obtained with those of a commercial gamma camera (Philips SKYLight). The results obtained confirm a rapid response of the device and an adequate spatial resolution for the use in the scintigraphic imaging. This work confirms the feasibility of a small gamma camera with an integrated display. This device is designed for radioguided surgery and small organ imaging, but it could be easily combined into surgical navigation systems.

A novel fully integrated handheld gamma camera

Energy Technology Data Exchange (ETDEWEB)

Massari, R.; Ucci, A.; Campisi, C. [Biostructure and Bioimaging Institute (IBB), National Research Council of Italy (CNR), Rome (Italy); Scopinaro, F. [University of Rome “La Sapienza”, S. Andrea Hospital, Rome (Italy); Soluri, A., E-mail: alessandro.soluri@ibb.cnr.it [Biostructure and Bioimaging Institute (IBB), National Research Council of Italy (CNR), Rome (Italy)

2016-10-01

In this paper, we present an innovative, fully integrated handheld gamma camera, namely designed to gather in the same device the gamma ray detector with the display and the embedded computing system. The low power consumption allows the prototype to be battery operated. To be useful in radioguided surgery, an intraoperative gamma camera must be very easy to handle since it must be moved to find a suitable view. Consequently, we have developed the first prototype of a fully integrated, compact and lightweight gamma camera for radiopharmaceuticals fast imaging. The device can operate without cables across the sterile field, so it may be easily used in the operating theater for radioguided surgery. The prototype proposed consists of a Silicon Photomultiplier (SiPM) array coupled with a proprietary scintillation structure based on CsI(Tl) crystals. To read the SiPM output signals, we have developed a very low power readout electronics and a dedicated analog to digital conversion system. One of the most critical aspects we faced designing the prototype was the low power consumption, which is mandatory to develop a battery operated device. We have applied this detection device in the lymphoscintigraphy technique (sentinel lymph node mapping) comparing the results obtained with those of a commercial gamma camera (Philips SKYLight). The results obtained confirm a rapid response of the device and an adequate spatial resolution for the use in the scintigraphic imaging. This work confirms the feasibility of a small gamma camera with an integrated display. This device is designed for radioguided surgery and small organ imaging, but it could be easily combined into surgical navigation systems.

Observation of the bone mineral density of newly formed bone using rabbits. Compared with newly formed bone around implants and cortical bone

International Nuclear Information System (INIS)

Nakada, Hiroshi; Numata, Yasuko; Sakae, Toshiro; Tamaki, Hiroyuki; Kato, Takao

2009-01-01

There have been many studies reporting that newly formed bone around implants is spongy bone. However, although the morphology is reported as being like spongy bone, it is difficult to discriminate whether the bone quality of newly formed bone appears similar to osteoid or cortical bone; therefore, evaluation of bone quality is required. The aims of this study were to measure the bone mineral density (BMD) values of newly formed bone around implants after 4, 8, 16, 24 and 48 weeks, to represent these values on three-dimensional color mapping (3Dmap), and to evaluate the change in bone quality associated with newly formed bone around implants. The animal experimental protocol of this study was approved by the Ethics Committee for Animal Experiments of our University. This experiment used 20 surface treatment implants (Ti-6Al-4V alloy: 3.1 mm in diameter and 30.0 mm in length) by grit-blasting. They were embedded into surgically created flaws in femurs of 20 New Zealand white rabbits (16 weeks old, male). The rabbits were sacrificed with an ear intravenous overdose of pentobarbital sodium under general anesthesia each period, and the femurs were resected. We measured BMD of newly formed bone around implants and cortical bone using Micro-CT, and the BMD distribution map of 3Dmap (TRI/3D Bon BMD, Ratoc System Engineering). The BMD of cortical bone was 1,026.3±44.3 mg/cm 3 at 4 weeks, 1,023.8±40.9 mg/cm 3 at 8 weeks, 1,048.2±45.6 mg/cm 3 at 16 weeks, 1,067.2±60.2 mg/cm 3 at 24 weeks, and 1,069.3±50.7 mg/cm 3 at 48 weeks after implantation, showing a non-significant increase each period. The BMD of newly formed bone around implants was 296.8±25.6 mg/cm 3 at 4 weeks, 525.0±72.4 mg/cm 3 at 8 weeks, 691.2±26.0 mg/cm 3 at 16 weeks, 776.9±27.7 mg/cm 3 at 24 weeks, and 845.2±23.1 mg/cm 3 at 48 weeks after implantation, showing a significant increase after each period. It was revealed that the color scale of newly formed bone was Low level at 4 weeks, and then it

Newly developed central diabetes insipidus following kidney transplantation: a case report.

Science.gov (United States)

Kim, K M; Kim, S M; Lee, J; Lee, S Y; Kwon, S K; Kim, H-Y

2013-09-01

Polyuria after kidney transplantation is a common, usually self-limiting disorder. However, persistent polyuria can cause not only patient discomfort, including polyuria and polydipsia, but also volume depletion that can produce allograft dysfunction. Herein, we have report a case of central diabetes insipidus newly diagnosed after kidney transplantation. A 45-year-old woman with end-stage kidney disease underwent deceased donor kidney transplantation. Two months after the transplantation, she was admitted for persistent polyuria, polydipsia, and nocturia with urine output of more than 4 L/d. Urine osmolarity was 100 mOsm/kg, which implied that the polyuria was due to water rather than solute diuresis. A water deprivation test was compatible with central diabetes insipidus; desmopressin treatment resulted in immediate symptomatic relief. Brain magnetic resonance imaging (MRI) demonstrated diffuse thickening of the pituitary stalk, which was considered to be nonspecific finding. MRI 12 months later showed no change in the pituitary stalk, although the patient has been in good health without polyuria or polydipsia on desmopressin treatment. The possibility of central diabetes insipidus should be considered in patients presenting with persistent polyuria after kidney transplantation. Copyright © 2013 Elsevier Inc. All rights reserved.

Newly graduated nurses' use of knowledge sources: a meta-ethnography.

Science.gov (United States)

Voldbjerg, Siri Lygum; Grønkjaer, Mette; Sørensen, Erik Elgaard; Hall, Elisabeth O C

2016-08-01

To advance evidence on newly graduated nurses' use of knowledge sources. Clinical decisions need to be evidence-based and understanding the knowledge sources that newly graduated nurses use will inform both education and practice. Qualitative studies on newly graduated nurses' use of knowledge sources are increasing though generated from scattered healthcare contexts. Therefore, a metasynthesis of qualitative research on what knowledge sources new graduates use in decision-making was conducted. Meta-ethnography. Nineteen reports, representing 17 studies, published from 2000-2014 were identified from iterative searches in relevant databases from May 2013-May 2014. Included reports were appraised for quality and Noblit and Hare's meta-ethnography guided the interpretation and synthesis of data. Newly graduated nurses' use of knowledge sources during their first 2-year postgraduation were interpreted in the main theme 'self and others as knowledge sources,' with two subthemes 'doing and following' and 'knowing and doing,' each with several elucidating categories. The metasynthesis revealed a line of argument among the report findings underscoring progression in knowledge use and perception of competence and confidence among newly graduated nurses. The transition phase, feeling of confidence and ability to use critical thinking and reflection, has a great impact on knowledge sources incorporated in clinical decisions. The synthesis accentuates that for use of newly graduated nurses' qualifications and skills in evidence-based practice, clinical practice needs to provide a supportive environment which nurtures critical thinking and questions and articulates use of multiple knowledge sources. © 2016 John Wiley & Sons Ltd.

Trial production and characterisation of fully calcia-stabilised zirconia

International Nuclear Information System (INIS)

George, A.M.; Karkhanavala, M.D.

1980-01-01

A process for manufacture of stabilized zirconia powder has been developed. The process is quite versatile since stabilization is achieved at relatively low temperatures (950deg - 1000deg C) and can be used for manufacture of either fully or partially calcia-stabilized zirconia. A 100 Kg trial batch of fully stabilized zirconia powder was produced accordingly at the Indian Rare Earths Ltd. plant and its characteristics were evaluated by XRD, microscopy, surface area and density measurements. The powder on firing at 1400deg C showed considerable volume shrinkage, as expected. On manually compacting with a phosphatic binder and firing for 8-10 hrs at 1300deg-1400deg C sintered shapes having bulk densities around 80-85% T.D. are easily obtained. Details of the measurements and the prospective industrial applications of the material are discussed. (auth.)

The nanotoxicology of a newly developed zero-valent iron nanomaterial for groundwater remediation and its remediation efficiency assessment combined with in vitro bioassays for detection of dioxin-like environmental pollutants

OpenAIRE

Schiwy, Andreas Herbert

2016-01-01

The assessment of chemicals and new compounds is an important task of ecotoxicology. In this thesis a newly developed zero-valent iron material for nanoremediation of groundwater contaminations was investigated and in vitro bioassays for high throughput screening were developed. These two elements of the thesis were combined to assess the remediation efficiency of the nanomaterial on the groundwater contaminant acridine. The developed in vitro bioassays were evaluated for quantification of th...

Certification document for newly generated contact-handled transuranic waste

International Nuclear Information System (INIS)

Box, W.D.; Setaro, J.

1984-01-01

The US Department of Energy has requested that all national laboratories handling defense waste develop and augment a program whereby all newly generated contact-handled transuranic (TRU) waste be contained, stored, and then shipped to the Waste Isolation Pilot Plant (WIPP) in accordance with the requirements set forth in WIPP-DOE-114. The program described in this report delineates how Oak Ridge National Laboratory intends to comply with these requirements and lists the procedures used by each generator to ensure that their TRU wastes are certifiable for shipment to WIPP

Newly blind persons using virtual environment system in a traditional orientation and mobility rehabilitation program: a case study.

Science.gov (United States)

Lahav, Orly; Schloerb, David W; Srinivasan, Mandayam A

2012-09-01

This paper presents a virtual reality system (the BlindAid) developed for orientation and mobility training of people who are newly blind. The BlindAid allows users to interact with different virtual structures and objects via auditory and haptic feedback. This case study aims to examine if and how the BlindAid, in conjunction with a traditional rehabilitation programme, can help people who are newly blind develop new orientation and mobility methods. Follow-up research based on this study, with a large experiment and control group, could contribute to the area of orientation and mobility rehabilitation training for the newly blind. The case study research focused on A., a woman who is newly blind, for 17 virtual sessions spanning ten weeks, during the 12 weeks of her traditional orientation and mobility rehabilitation programme. The research was implemented by using virtual environment (VE) exploration and orientation tasks in VE and physical spaces. The research methodology used both qualitative and quantitative methods, including interviews, questionnaire, videotape recording, and user computer logs. The results of this study helped elucidate several issues concerning the contribution of the BlindAid system to the exploration strategies and learning processes experienced by the participant in her encounters with familiar and unfamiliar physical surroundings. [Box: see text].

CMS on the GRID: Toward a fully distributed computing architecture

International Nuclear Information System (INIS)

Innocente, Vincenzo

2003-01-01

The computing systems required to collect, analyse and store the physics data at LHC would need to be distributed and global in scope. CMS is actively involved in several grid-related projects to develop and deploy a fully distributed computing architecture. We present here recent developments of tools for automating job submission and for serving data to remote analysis stations. Plans for further test and deployment of a production grid are also described

The impact of organisational culture on the adaptation of newly ...

African Journals Online (AJOL)

Usually newly employed nurses find adjusting to a work setting a challenging experience. Their successful adaptation to their work situation is greatly influenced by the socialisation process inherent in the organisational culture. The newly employed nurse often finds that the norms are unclear, confusing and restrictive.

A newly developed spinal simulator.

Science.gov (United States)

Chester, R; Watson, M J

2000-11-01

A number of studies indicate poor intra-therapist and inter-therapist reliability in the performance of graded, passive oscillatory movements to the lumbar spine. However, it has been suggested that therapists can be trained to be more consistent in their performance of these techniques if given reliable quantitative feedback. The intention of this study was to develop equipment, analogous to the lumbar spine that could be used for both teaching and research purposes. Equipment has been updated and connected to a personal IBM compatible computer. Custom designed software allows concurrent and accurate feedback to students on their performance and in a form suitable for advanced data analysis using statistical packages. The uses and implications of this equipment are discussed. Copyright 2000 Harcourt Publishers Ltd.

New approach to solve symmetric fully fuzzy linear systems

Indian Academy of Sciences (India)

concepts of fuzzy set theory and then define a fully fuzzy linear system of equations. .... To represent the above problem as fully fuzzy linear system, we represent x .... Fully fuzzy linear systems can be solved by Linear programming approach, ...

Encounters of Newly Qualified Teachers with Micro-Politics in Primary Schools in Zimbabwe

Science.gov (United States)

Magudu, Snodia; Gumbo, Mishack

2017-01-01

This article demonstrates, through the example of Zimbabwe, the complexities of micro-political learning during induction. It reports on the experiences of ten newly qualified teachers with micro-politics or power relations in their schools during induction and locates these experiences within the broader context of their professional development.…

The construction of social identity in newly recruited nuclear engineering staff: A longitudinal study

International Nuclear Information System (INIS)

Nguyen, Lynda; Murphy, Glen; Chang, Artemis

2014-01-01

This study examines the process by which newly recruited nuclear engineering and technical staff came to understand, define, think, feel and behave within a distinct group that has a direct contribution to the organization's overall emphasis on a culture of reliability and system safety. In the field of organizational behavior the interactive model of social identity formation has been recently proposed to explain the process by which the internalization of shared norms and values occurs, an element critical in identity formation. Using this rich model of organizational behavior we analyzed multiple sources of data from nine new hires over a period of three years. This was done from the time they were employed to investigate the construction of social identity by new entrants entering into a complex organizational setting reflected in the context of a nuclear facility. Informed by our data analyses, we found support for the interactive model of social identity development and report the unexpected finding that a newly appointed member's age and level of experience appears to influence the manner in which they adapt, and assimilate into their surroundings. This study represents an important contribution to the safety and reliability literature as it provides a rich insight into the way newly recruited employees enact the process by which their identities are formed and hence act, particularly under conditions of duress or significant organizational disruption in complex organizational settings. - Highlights: • We examined how newly recruited nuclear engineer staff develop their social identity. • The study empirically examined the interactive model of social identity formation. • Innovative research strategies were used to capture rich primary data for all case studies. • Age and experience moderated internalization route and the social identity formation process

Assessment for markers of nephropathy in newly diagnosed type 2 ...

African Journals Online (AJOL)

Objective: To assess for markers of nephropathy in newly diagnosed type 2 diabetics, using blood pressure levels, endogenous creatinine clearance and urinary protein excretion as markers of renal disease. Study design: Ninety newly diagnosed type 2 diabetics were studied within 6 weeks of diagnosis. They were in ...

Efficacy of Intra-articular Injection of a Newly Developed Plasma Rich in Growth Factor (PRGF) Versus Hyaluronic Acid on Pain and Function of Patients with Knee Osteoarthritis: A Single-Blinded Randomized Clinical Trial

Science.gov (United States)

Raeissadat, Seyed Ahmad; Rayegani, Seyed Mansoor; Ahangar, Azadeh Gharooee; Abadi, Porya Hassan; Mojgani, Parviz; Ahangar, Omid Gharooi

2017-01-01

Background and objectives: Knee osteoarthritis is the most common joint disease. We aimed to compare the efficacy and safety of intra-articular injection of a newly developed plasma rich in growth factor (PRGF) versus hyaluronic acid (HA) on pain and function of patients with knee osteoarthritis. Methods: In this single-blinded randomized clinical trial, patients with symptomatic osteoarthritis of knee were assigned to receive 2 intra-articular injections of our newly developed PRGF in 3 weeks or 3 weekly injections of HA. Our primary outcome was the mean change from baseline until 2 and 6 months post intervention in scores of visual analog scale, Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), and Lequesne index. We used analysis of variance for repeated-measures statistical test. Results: A total of 69 patients entered final analysis. The mean age of patients was 58.2 ± 7.41 years and 81.2% were women. In particular, total WOMAC index decreased from 42.9 ± 13.51 to 26.8 ± 13.45 and 24.4 ± 16.54 at 2 and 6 months in the newly developed PRGF group (within subjects P = .001), and from 38.8 ± 12.62 to 27.8 ± 11.01 and 27.4 ± 11.38 at 2 and 6 months in the HA group (within subjects P = .001), respectively (between subjects P = .631). There was no significant difference between PRGF and HA groups in patients’ satisfaction and minor complications of injection, whereas patients in HA group reported significantly lower injection-induced pain. Conclusions: In 6 months follow up, our newly developed PRGF and HA, both are effective options to decrease pain and improvement of function in patients with symptomatic mild to moderate knee osteoarthritis. PMID:29051707

Efficacy of Intra-articular Injection of a Newly Developed Plasma Rich in Growth Factor (PRGF Versus Hyaluronic Acid on Pain and Function of Patients with Knee Osteoarthritis: A Single-Blinded Randomized Clinical Trial

Directory of Open Access Journals (Sweden)

Seyed Ahmad Raeissadat

2017-10-01

Full Text Available Background and objectives: Knee osteoarthritis is the most common joint disease. We aimed to compare the efficacy and safety of intra-articular injection of a newly developed plasma rich in growth factor (PRGF versus hyaluronic acid (HA on pain and function of patients with knee osteoarthritis. Methods: In this single-blinded randomized clinical trial, patients with symptomatic osteoarthritis of knee were assigned to receive 2 intra-articular injections of our newly developed PRGF in 3 weeks or 3 weekly injections of HA. Our primary outcome was the mean change from baseline until 2 and 6 months post intervention in scores of visual analog scale, Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC, and Lequesne index. We used analysis of variance for repeated-measures statistical test. Results: A total of 69 patients entered final analysis. The mean age of patients was 58.2 ± 7.41 years and 81.2% were women. In particular, total WOMAC index decreased from 42.9 ± 13.51 to 26.8 ± 13.45 and 24.4 ± 16.54 at 2 and 6 months in the newly developed PRGF group (within subjects P  = .001, and from 38.8 ± 12.62 to 27.8 ± 11.01 and 27.4 ± 11.38 at 2 and 6 months in the HA group (within subjects P  = .001, respectively (between subjects P  = .631. There was no significant difference between PRGF and HA groups in patients’ satisfaction and minor complications of injection, whereas patients in HA group reported significantly lower injection-induced pain. Conclusions: In 6 months follow up, our newly developed PRGF and HA, both are effective options to decrease pain and improvement of function in patients with symptomatic mild to moderate knee osteoarthritis.

Numerical and analytical investigation towards performance enhancement of a newly developed rockfall protective cable-net structure

Directory of Open Access Journals (Sweden)

S. Dhakal

2012-04-01

Full Text Available In a previous companion paper, we presented a three-tier modelling of a particular type of rockfall protective cable-net structure (barrier, developed newly in Japan. Therein, we developed a three-dimensional, Finite Element based, nonlinear numerical model having been calibrated/back-calculated and verified with the element- and structure-level physical tests. Moreover, using a very simple, lumped-mass, single-degree-of-freedom, equivalently linear analytical model, a global-displacement-predictive correlation was devised by modifying the basic equation – obtained by combining the principles of conservation of linear momentum and energy – based on the back-analysis of the tests on the numerical model. In this paper, we use the developed models to explore the performance enhancement potential of the structure in terms of (a the control of global displacement – possibly the major performance criterion for the proposed structure owing to a narrow space available in the targeted site, and (b the increase in energy dissipation by the existing U-bolt-type Friction-brake Devices – which are identified to have performed weakly when integrated into the structure. A set of parametric investigations have revealed correlations to achieve the first objective in terms of the structure's mass, particularly by manipulating the wire-net's characteristics, and has additionally disclosed the effects of the impacting-block's parameters. Towards achieving the second objective, another set of parametric investigations have led to a proposal of a few innovative improvements in the constitutive behaviour (model of the studied brake device (dissipator, in addition to an important recommendation of careful handling of the device based on the identified potential flaw.

Accumulation of operational history through emulation test to meet proven technology requirement for newly developed I and C technology

International Nuclear Information System (INIS)

Yeong Cheol, Shin; Sung Kon, Kang; Han Seong, Son

2006-01-01

As new advanced digital I and C technology with potential benefits of higher functionality and better cost effectiveness is available in the market, NPP (Nuclear Power Plant) operators are inclined to use the new technology for the construction of new plant and the upgrade of existing plants. However, this new technology poses risks to the NPP operators at the same time. These risks are mainly due to the poor reliability of newly developed technology. KHNP's past experiences with the new equipment shows many cases of reliability problems. And their consequences include unintended plant trips, lowered acceptance of the new digital technology by the plant I and C maintenance crew, and increased licensing burden in answering for questions from the nuclear regulatory body. Considering the fact that the risk of these failures in the nuclear plant operation is far greater than those in other industry, nuclear power plant operators want proven technology for I and C systems. This paper presents an approach for the emulation of operational history through which a newly developed technology becomes a proven technology. One of the essential elements of this approach is the feedback scheme of running the new equipment in emulated environment, gathering equipment failure, and correcting the design(and test bed). The emulation of environment includes normal and abnormal events of the new equipment such as reconfiguration of control system due to power failure, plant operation including full spectrum of credible scenarios in an NPP. Emulation of I and C equipment execution mode includes normal operation, initialization and termination, abnormal operation, hardware maintenance and maintenance of algorithm/software. Plant specific simulator is used to create complete profile of plant operational conditions that I and C equipment is to experience in the real plant. Virtual operating crew technology is developed to run the simulator scenarios without involvement of actual operators

Characteristics of low polymerization shrinkage flowable resin composites in newly-developed cavity base materials for bulk filling technique.

Science.gov (United States)

Nitta, Keiko; Nomoto, Rie; Tsubota, Yuji; Tsuchikawa, Masuji; Hayakawa, Tohru

2017-11-29

The purpose of this study was to evaluate polymerization shrinkage and other physical properties of newly-developed cavity base materials for bulk filling technique, with the brand name BULK BASE (BBS). Polymerization shrinkage was measured according to ISO/FDIS 17304. BBS showed the significantly lowest polymerization shrinkage and significantly higher depth of cure than conventional flowable resin composites (p<0.05). The Knoop hardness, flexural strength and elastic modulus of that were significantly lower than conventional flowable resin composites (p<0.05). BBS had the significantly greatest filler content (p<0.05). SEM images of the surface showed failure of fillers. The lowest polymerization shrinkage was due to the incorporation of a new type of low shrinkage monomer, which has urethane moieties. There were no clear correlations between inorganic filler contents and polymerization shrinkage, flexural strength and elastic modulus. In conclusion, the low polymerization shrinkage of BBS will be useful for cavity treatment in dental clinics.

14 CFR 26.39 - Newly produced airplanes: Fuel tank flammability.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Newly produced airplanes: Fuel tank... Tank Flammability § 26.39 Newly produced airplanes: Fuel tank flammability. (a) Applicability: This... Series 767 Series (b) Any fuel tank meeting all of the criteria stated in paragraphs (b)(1), (b)(2) and...

Onset of nucleate boiling and onset of fully developed subcooled boiling detection using pressure transducers signals spectral analysis

International Nuclear Information System (INIS)

Maprelian, Eduardo; Castro, Alvaro Alvim de; Ting, Daniel Kao Sun

1999-01-01

The experimental technique used for detection of subcooled boiling through analysis of the fluctuation contained in pressure transducers signals is presented. The experimental part of this work was conducted at the Institut fuer Kerntechnik und zertoerungsfreie Pruefverfahren von Hannover (IKPH, Germany) in a thermal-hydraulic circuit with one electrically heated rod with annular geometry test section. Piezo resistive pressure sensors are used for onset of nucleate boiling (ONB) and onset of fully developed boiling (OFDB) detection using spectral analysis/signal correlation techniques. Experimental results are interpreted by phenomenological analysis of these two points and compared with existing correlation. The results allows us to conclude that this technique is adequate for the detection and monitoring of the ONB and OFDB. (author)

Self-Esteem: A Comparison between Hong Kong Children and Newly Arrived Chinese Children

Science.gov (United States)

Chan, Yiu Man; Chan, Christine Mei-Sheung

2004-01-01

The Self-esteem Inventory developed by Coopersmith (1967) was used to measure the self-esteem of 387 Chinese children. The sample included newly arrived mainland Chinese children and Hong Kong children. The results showed significant statistical differences when measuring the self-esteem level associated with the length of their stay in Hong Kong…

Chrysosplenium japonicum (Saxifragaceae, Newly Recorded from Taiwan

Directory of Open Access Journals (Sweden)

Tian-Chuan Hsu

2011-11-01

Full Text Available Chrysosplenium japonicum (Maxim. Makino (Saxifragaceae is newly recorded from northeastern Taiwan. Description, color photos and a key to the Chrysosplenium species in Taiwan are provided.

Improved Spatial Resolution in Thick, Fully-Depleted CCDs with Enhanced Red Sensitivity

International Nuclear Information System (INIS)

Fairfield, Jessamyn A.

2005-01-01

The point spread function (PSF) is an important measure of spatial resolution in CCDs for point-like objects, since it can affect use in imaging and spectroscopic applications. We present new data and theoretical developments in the study of lateral charge diffusion in thick, fully-depleted charge-coupled devices (CCDs) developed at Lawrence Berkeley National Laboratory (LBNL). Because they are fully depleted, the LBNL devices have no field-free region, and diffusion can be controlled through the application of an external bias voltage. We give results for a 3512x3512 format, 10.5 ?m pixel back-illuminated p-channel CCD developed for the SuperNova/Acceleration Probe (SNAP), a proposed satellite-based experiment designed to study dark energy. The PSF was measured at substrate bias voltages between 3 V and 115 V. At a bias voltage of 115V, we measure an rms diffusion of 3.7 ± 0.2 (micro)m. Lateral charge diffusion in LBNL CCDs is thus expected to meet the SNAP requirements

Test results of a 5 kW fully superconducting homopolar motor

Energy Technology Data Exchange (ETDEWEB)

Lee, J. K. [Woosuk University, Wanju (Korea, Republic of); Park, S. H.; Kim, Y.; Lee, S.; Joo, H. G.; Kim, W. S.; Choi, K. [Korea Polytechnic University,Siheong (Korea, Republic of); Hahm, S. Y. [Electrical Engineering and Science Research Institute,Seoul (Korea, Republic of)

2013-05-15

The superconducting Homopolar motor is manufactured and tested. Homopolar motor system is simple and solid as the field coil of the motor is fixed near the stator coil without rotating system. In this paper, a 5 kW fully superconducting homopolar motor which has high temperature superconducting armature and field coils is manufactured and tested in liquid nitrogen. The critical current test results of the used 2G superconducting wire, pancake coil for rotor winding and race-track coils for armature winding are reported. Also, the test result of rotating and operating performance is presented. The operating frequency is to be 5 Hz for low-speed rotating. The developed fully superconducting Homopolar motor is the world's first.

Test results of a 5 kW fully superconducting homopolar motor

International Nuclear Information System (INIS)

Lee, J. K.; Park, S. H.; Kim, Y.; Lee, S.; Joo, H. G.; Kim, W. S.; Choi, K.; Hahm, S. Y.

2013-01-01

The superconducting Homopolar motor is manufactured and tested. Homopolar motor system is simple and solid as the field coil of the motor is fixed near the stator coil without rotating system. In this paper, a 5 kW fully superconducting homopolar motor which has high temperature superconducting armature and field coils is manufactured and tested in liquid nitrogen. The critical current test results of the used 2G superconducting wire, pancake coil for rotor winding and race-track coils for armature winding are reported. Also, the test result of rotating and operating performance is presented. The operating frequency is to be 5 Hz for low-speed rotating. The developed fully superconducting Homopolar motor is the world's first.

People newly in love are more responsive to positive feedback.

Science.gov (United States)

Brown, Cassandra L; Beninger, Richard J

2012-06-01

Passionate love is associated with increased activity in dopamine-rich regions of the brain. Increased dopamine in these regions is associated with a greater tendency to learn from reward in trial-and-error learning tasks. This study examined the prediction that individuals who were newly in love would be better at responding to reward (positive feedback). In test trials, people who were newly in love selected positive outcomes significantly more often than their single (not in love) counterparts but were no better at the task overall. This suggests that people who are newly in love show a bias toward responding to positive feedback, which may reflect a general bias towards reward-seeking.

Different patterns in the risk of newly developed fatty liver and lipid changes with tamoxifen versus aromatase inhibitors in postmenopausal women with early breast cancer: A propensity score-matched cohort study.

Science.gov (United States)

Hong, Namki; Yoon, Han Gyul; Seo, Da Hea; Park, Seho; Kim, Seung Il; Sohn, Joo Hyuk; Rhee, Yumie

2017-09-01

Management of metabolic complications of long-term adjuvant endocrine therapy in early breast cancer remained an unmet need. We aimed to compare the effects of tamoxifen (TMX) and aromatase inhibitors (AIs) on the risk of fatty liver in conjunction with longitudinal changes in the serum lipid parameters. Among 1203 subjects who were taking adjuvant TMX or AI (anastrozole or letrozole) without fatty liver at baseline, those taking TMX or AI were 1:1 matched on the propensity score. The primary outcome was newly developed fatty liver detected on annual liver ultrasonography. Among 328 matched subjects (mean age 53.5 years, body mass index 22.9 kg/m 2 ), 62 cases of fatty liver in the TMX group and 41 cases in the AI group were detected in a total of 987.4 person-years. The incidence rate of fatty liver was higher in the TMX group than in the AI group (128.7 versus 81.1 per 1000 person-years, P = 0.021), particularly within the first 2 years of therapy. TMX was associated with an increased 5-year risk of newly developed fatty liver (adjusted hazard ratio 1.61, P = 0.030) compared with AI independent of obesity and cholesterol level. Subjects who developed fatty liver had higher triglycerides (TGs) and lower high-density lipoprotein cholesterol (HDL-C) level at baseline than those without, which was sustained during follow-up despite the serum cholesterol-lowering effect of TMX. TMX independently increased the 5-year risk of newly developed fatty liver compared with AI in postmenopausal women with early breast cancer. Our findings suggest the need for considering the risk of fatty liver as a different adverse event profile between AI and TMX, particularly in patients with obesity, high TGs and low HDL-C. Copyright © 2017 Elsevier Ltd. All rights reserved.

Weldability of newly developed austenitic alloy for cryogenic service

International Nuclear Information System (INIS)

Ogawa, T.; Koseki, T.

1986-01-01

The testing reported in this paper involved typical steels of the new grades such as STEEL-A (0.025C-14Ni-25Cr-0.35N), STEEL-B (0.04C-23Mn-13Cr-0.22N) and STEEL-C (0.20C-25Mn-5Cr), and commercial steels of Type 300 series. Weldments were made mainly using the GTAW, SMAW and SAW processes with experimental and commercial filler metals. Strength and toughness of weldments were examined at 77 K (-321 0 F) and 4 K. The strengthening of material through the addition of nitrogen was far greater in the weld metal that in the base metal at cryogenic temperature. In fact, 0.2% proof stress of weld metals bearging 0.20% to 0.40% nitrogen at 77 K exhibited a higher value by 60 to 150 MPa (8,740 to 21,760 psi) than that of the base metal. Impact absorbed energy of weld metals at 77 K decreased rapidly with nitrogen content, 60-90 J at 0.20%N to 20-50J at 0.35% N. Rather high impact absorbed energy was obtained when the weld metal solidified as primary austenitic phase, resulting in fully austenitic microstructure or austenite-eutectic ferrite mixture at ambient temperature. In addition, oxide inclusions, the number of which strongly depends on welding processes, were detrimental to toughness of weld metals at cryogenic temperature

Current filamentation caused by the electrochemical instability in a fully ionized plasma

International Nuclear Information System (INIS)

Haines, M.G.; Marsh, F.

1983-01-01

This chapter is primarily concerned with the non-linear development of electrothermal instabilities in a fully ionized plasma discharge in which the current is predominantly carried parallel to an applied magnetic field, as in the Tokamak configuration. Discusses instabilities with wave-number K perpendicular to magnetic field B and current J; the non-linear steady state; amplitude of the filaments; and runaway electrons and ion acoustic instabilities. Concludes that the steady non-linear amplitude of the fully developed instability shows a spiky filamentary structure with the possibility of the generation of runaway electrons and ion acoustic turbulence in the current maxima. Finds that the addition of bremsstrahlung radiation loss enhances the instability, reducing the critical ratio of T /SUB e/ to T /SUB i/ for its onset, and yielding a maximum ion temperature attainable by Joule heating and equipartition

Workplace Violence and Job Outcomes of Newly Licensed Nurses

OpenAIRE

Chang, Hyoung Eun; Cho, Sung-Hyun

2016-01-01

Purpose: The purpose of this study was to examine the prevalence of workplace violence toward newly licensed nurses and the relationship between workplace violence and job outcomes. Methods: An online survey was conducted of newly licensed registered nurses who had obtained their license in 2012 or 2013 in South Korea and had been working for 5–12 months after first being employed. The sample consisted of 312 nurses working in hospitals or clinics. The Copenhagen Psychosocial Questionnaire...

7 CFR 718.304 - Failure to fully comply.

Science.gov (United States)

2010-01-01

... authorized in accordance with § 718.305 if the participant made a good faith effort to comply fully with the... FSA approval official to have made a good faith effort to comply fully with the terms and conditions...

Investigation of various reconstruction parameters for algebraic reconstruction technique in a newly developed chest digital tomosynthesis

International Nuclear Information System (INIS)

Lee, H.; Choi, S.; Kim, Y.-S.; Park, H.-S.; Seo, C.-W.; Kim, H.-J.; Lee, D.; Lee, Y.

2017-01-01

Chest digital tomosynthesis (CDT) is a promising new modality that provides 3D information by reconstructing limited projection views. CDT systems have been developed to improve the limitations of conventional radiography such as image degradation and low sensitivity. However, the development of reconstruction methods is challenging because of the limited projection views within various angular ranges. Optimization of reconstruction parameters for various reconsturction methods in CDT system also is needed. The purpose of this study was to investigate the feasibility of algebraic reconstruction technique (ART) method, and to evaluate the effect of the reconstruction parameters for our newly developed CDT system. We designed ART method with 41 projection views over an angular range of ±20°. To investigate the effect of reconstruction parameters, we measured the contrast-to-noise ratio (CNR), artifact spread function (ASF), and quality factor (QF) using LUNGMAN phantom included tumors. We found that the proper choice of reconstruction parameters such as relaxation parameter, initial guess, and number of iterations improved the quality of reconstructed images from the same projection views. Optimal values of ART relaxation parameter with uniform (UI) and back-projection (BP) initial guesses were 0.4 and 0.6, respectively. BP initial guess improved image quality in comparison with UI initial guess, in terms of providing a higher CNR and QF values with a faster speed. CNR and QF values improved with increasing number of iteration. Particularly, ART method with BP initial guess (when β = 0.6) after 3-terations provide satisfactory reconstructed image. In conclusion, the use of ART method with proper reconstruction parameters provided better image quality than FBP method as well as conventional radiography. These results indicated that the ART method with optimal reconstruction parameters could improve image quality for nodule detection using the CDT system.

Investigation of various reconstruction parameters for algebraic reconstruction technique in a newly developed chest digital tomosynthesis

Science.gov (United States)

Lee, H.; Choi, S.; Lee, D.; Kim, Y.-s.; Park, H.-S.; Lee, Y.; Seo, C.-W.; Kim, H.-J.

2017-08-01

Chest digital tomosynthesis (CDT) is a promising new modality that provides 3D information by reconstructing limited projection views. CDT systems have been developed to improve the limitations of conventional radiography such as image degradation and low sensitivity. However, the development of reconstruction methods is challenging because of the limited projection views within various angular ranges. Optimization of reconstruction parameters for various reconsturction methods in CDT system also is needed. The purpose of this study was to investigate the feasibility of algebraic reconstruction technique (ART) method, and to evaluate the effect of the reconstruction parameters for our newly developed CDT system. We designed ART method with 41 projection views over an angular range of ±20°. To investigate the effect of reconstruction parameters, we measured the contrast-to-noise ratio (CNR), artifact spread function (ASF), and quality factor (QF) using LUNGMAN phantom included tumors. We found that the proper choice of reconstruction parameters such as relaxation parameter, initial guess, and number of iterations improved the quality of reconstructed images from the same projection views. Optimal values of ART relaxation parameter with uniform (UI) and back-projection (BP) initial guesses were 0.4 and 0.6, respectively. BP initial guess improved image quality in comparison with UI initial guess, in terms of providing a higher CNR and QF values with a faster speed. CNR and QF values improved with increasing number of iteration. Particularly, ART method with BP initial guess (when β = 0.6) after 3-terations provide satisfactory reconstructed image. In conclusion, the use of ART method with proper reconstruction parameters provided better image quality than FBP method as well as conventional radiography. These results indicated that the ART method with optimal reconstruction parameters could improve image quality for nodule detection using the CDT system.

Assessment of salt tolerance of some newly developed and candidate wheat (triticum aestivum l.) cultivars using gas exchange and chlorophyll fluorescence attributes

International Nuclear Information System (INIS)

Kanwal, H.; Shahbaz, M.; Ashraf, M.

2011-01-01

The present study was aimed to assess salt tolerance of some newly developed and candidate cultivars of wheat using gas exchange and chlorophyll fluorescence parameters. Ten wheat cultivars including five newly developed (S-24, Saher-2006, Fsd-2008, Lasani and Inqlab-91) and five candidate (P .B-18, M.P-65, S.H-20, AARI-10 and G.A-20) were grown in sand culture. Salt stress (150 mM NaCl in Hoagland's nutrient solution) was applied at the seedling stage. A significant reduction in plant biomass production was recorded in all wheat cultivars. Cultivars S-24, Saher-2006 and Fsd-2008 showed less reduction in biomass production as compared with the other cultivars. Different gas exchange attributes such as leaf net photosynthetic rate (A), transpiration rate ( E), and stomatal conductance (gs) were also adversely affected due to salt stress and were positively associated with the plant biomass production of the genotypes under saline stress. More negative effects in relation to these gas exchange attributes were recorded in cvs. Lasani, G.A-20 and ARRI-10 than those in the other cultivars. Leaf maximum chlorophyll fluorescence (Fm), maximum fluorescence at steady state (Fms ), and photochemical fluorescence quenching (Qp) increased while maximum quantum yield (Fv/Fm), quantum yield of electron transport (Qp), electron transport rate ( ETR ) and non-photochemical quenching (Qn) decreased due to imposition of salt stress. The adverse effects of salt stress on these chlorophyll fluorescence attributes were minimum in cultivars S-24, Saher-2006 and Fsd-2008. A significant positive correlation was recorded between biomass production, different gas exchange attributes and chlorophyll fluorescence parameters. Overall, cvs. S-24, Saher-2006 and Fsd-2008 were ranked as salt tolerant on the basis of their performance in biomass production, gas exchange attributes and chlorophyll fluorescence parameters. (author)

Fully Packaged Carbon Nanotube Supercapacitors by Direct Ink Writing on Flexible Substrates.

Science.gov (United States)

Chen, Bolin; Jiang, Yizhou; Tang, Xiaohui; Pan, Yayue; Hu, Shan

2017-08-30

The ability to print fully packaged integrated energy storage components (e.g., supercapacitors) is of critical importance for practical applications of printed electronics. Due to the limited variety of printable materials, most studies on printed supercapacitors focus on printing the electrode materials but rarely the full-packaged cell. This work presents for the first time the printing of a fully packaged single-wall carbon nanotube-based supercapacitor with direct ink writing (DIW) technology. Enabled by the developed ink formula, DIW setup, and cell architecture, the whole printing process is mask free, transfer free, and alignment free with precise and repeatable control on the spatial distribution of all constituent materials. Studies on cell design show that a wider electrode pattern and narrower gap distance between electrodes lead to higher specific capacitance. The as-printed fully packaged supercapacitors have energy and power performances that are among the best in recently reported planar carbon-based supercapacitors that are only partially printed or nonprinted.

The role of infections and coinfections with newly identified and emerging respiratory viruses in children

Directory of Open Access Journals (Sweden)

Debiaggi Maurizia

2012-10-01

Full Text Available Abstract Acute respiratory infections are a major cause of morbidity in children both in developed and developing countries. A wide range of respiratory viruses, including respiratory syncytial virus (RSV, influenza A and B viruses, parainfluenza viruses (PIVs, adenovirus, rhinovirus (HRV, have repeatedly been detected in acute lower respiratory tract infections (LRTI in children in the past decades. However, in the last ten years thanks to progress in molecular technologies, newly discovered viruses have been identified including human Metapneumovirus (hMPV, coronaviruses NL63 (HcoV-NL63 and HKU1 (HcoV-HKU1, human Bocavirus (HBoV, new enterovirus (HEV, parechovirus (HpeV and rhinovirus (HRV strains, polyomaviruses WU (WUPyV and KI (KIPyV and the pandemic H1N1v influenza A virus. These discoveries have heavily modified previous knowledge on respiratory infections mainly highlighting that pediatric population is exposed to a variety of viruses with similar seasonal patterns. In this context establishing a causal link between a newly identified virus and the disease as well as an association between mixed infections and an increase in disease severity can be challenging. This review will present an overview of newly recognized as well as the main emerging respiratory viruses and seek to focus on the their contribution to infection and co-infection in LRTIs in childhood.

Theoretical effects of fully ductile versus fully brittle behaviors of bone tissue on the strength of the human proximal femur and vertebral body.

Science.gov (United States)

Nawathe, Shashank; Yang, Haisheng; Fields, Aaron J; Bouxsein, Mary L; Keaveny, Tony M

2015-05-01

The influence of the ductility of bone tissue on whole-bone strength represents a fundamental issue of multi-scale biomechanics. To gain insight, we performed a computational study of 16 human proximal femurs and 12 T9 vertebral bodies, comparing the whole-bone strength for the two hypothetical bounding cases of fully brittle versus fully ductile tissue-level failure behaviors, all other factors, including tissue-level elastic modulus and yield stress, held fixed. For each bone, a finite element model was generated (60-82 μm element size; up to 120 million elements) and was virtually loaded in habitual (stance for femur, compression for vertebra) and non-habitual (sideways fall, only for femur) loading modes. Using a geometrically and materially non-linear model, the tissue was assumed to be either fully brittle or fully ductile. We found that, under habitual loading, changing the tissue behavior from fully ductile to fully brittle reduced whole-bone strength by 38.3±2.4% (mean±SD) and 39.4±1.9% for the femur and vertebra, respectively (p=0.39 for site difference). These reductions were remarkably uniform across bones, but (for the femur) were greater for non-habitual (57.1±4.7%) than habitual loading (pductile cases. These theoretical results suggest that the whole-bone strength of the proximal femur and vertebra can vary substantially between fully brittle and fully ductile tissue-level behaviors, an effect that is relatively insensitive to bone morphology but greater for non-habitual loading. Copyright © 2015 Elsevier Ltd. All rights reserved.

Exploring Content Validity of Shore Handwriting Screening and Newly Developed Score Sheet With Pre-Kindergarten Students

Directory of Open Access Journals (Sweden)

Denise K. Donica

2015-07-01

Full Text Available Background: Limited tools exist to measure handwriting readiness skills of pre-kindergarten students. This study was a preliminary exploration of content validity of the Shore Handwriting Screening (SHS and the newly developed Score Sheet with the Bruininks-Oseretsky Test of Motor Proficiency, Second Edition (BOT-2 in 4- and 5-year-old pre-kindergarten students. Because socioeconomic status (SES is known to impact handwriting skills, data from two different socioeconomic groups were collected. Method: Students from a Lower SES group (n = 36 and a Higher SES group (n = 14 completed the SHS and fine motor composite of the BOT-2. Pearson’s correlation was used to compare scores on the two assessments within the two groups. Results: SHS overall percentage scores were compared to standard scores and composite scores of the BOT-2. SHS scores displayed moderate to high correlation with fine manual control portions of the BOT-2 for the Lower SES group and low to moderate correlation for the same portion in the Higher SES group. Conclusion: SHS and the Score Sheet correlate to fine and visual-motor skill subtests on the fine manual control portions of the BOT-2, which supports the need for further research on the reliability and validity of the Score Sheet for use in practice.

Exercise recommendations in patients with newly diagnosed fibromyalgia.

Science.gov (United States)

Wilson, Brad; Spencer, Horace; Kortebein, Patrick

2012-04-01

To evaluate exercise recommendations in patients newly diagnosed with fibromyalgia. A retrospective chart review. A public university rheumatology clinic. Patients newly diagnosed with fibromyalgia (N = 122). Frequency and type of exercise recommendations. The mean (standard deviation) age of these patients with fibromyalgia was 45 ± 12 years; 91% were women. Exercise was recommended as part of the documented treatment plan in 47% of these patients (57/122); only 3 patients had a documented contraindication for exercise. Aquatic exercise was most frequently recommended (56% [32/57]), followed by combined aquatic-aerobic exercise (26% [15/57]), and, infrequently, aerobic exercise only (5% [3/57]); only 7% of these patients (4/57) were referred for physical therapy. The primary method of communication was verbal discussion (94% [54/57]). Although there is well-documented evidence that exercise is beneficial for patients with fibromyalgia, we found that less than half of patients with newly diagnosed fibromyalgia in our study were provided recommendations to initiate an exercise program as part of their treatment plan. Further investigation of these findings are warranted, including evaluation of other university and community rheumatology practices as well as that of other physicians caring for patients with fibromyalgia. However, our findings indicate that there appears to be an opportunity to provide more specific and practical education regarding the implementation of an exercise regimen for patients with newly diagnosed fibromyalgia. Physiatrists may be particularly well suited to manage the exercise component of patients with fibromyalgia because of their specialized training in exercise prescription. Copyright © 2012 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

Moving towards a Competitive Fully Enzymatic Biodiesel Process

Directory of Open Access Journals (Sweden)

Silvia Cesarini

2015-06-01

Full Text Available Enzymatic biodiesel synthesis can solve several problems posed by the alkaline-catalyzed transesterification but it has the drawback of being too expensive to be considered competitive. Costs can be reduced by lipase improvement, use of unrefined oils, evaluation of soluble/immobilized lipase preparations, and by combination of phospholipases with a soluble lipase for biodiesel production in a single step. As shown here, convenient natural tools have been developed that allow synthesis of high quality FAMEs (EN14214 from unrefined oils in a completely enzymatic single-step process, making it fully competitive.

Critical thinking dispositions among newly graduated nurses.

Science.gov (United States)

Wangensteen, Sigrid; Johansson, Inger S; Björkström, Monica E; Nordström, Gun

2010-10-01

The aim of the study was to describe critical thinking dispositions among newly graduated nurses in Norway, and to study whether background data had any impact on critical thinking dispositions. Competence in critical thinking is one of the expectations of nursing education. Critical thinkers are described as well-informed, inquisitive, open-minded and orderly in complex matters. Critical thinking competence has thus been designated as an outcome for judging the quality of nursing education programmes and for the development of clinical judgement. The ability to think critically is also described as reducing the research-practice gap and fostering evidence-based nursing. A cross-sectional descriptive study was performed. The data were collected between October 2006 and April 2007 using the California Critical Thinking Disposition Inventory. The response rate was 33% (n = 618). Pearson's chi-square tests were used to analyse the data. Nearly 80% of the respondents reported a positive disposition towards critical thinking. The highest mean score was on the Inquisitiveness subscale and the lowest on the Truth-seeking subscale. A statistically significant higher proportion of nurses with high critical thinking scores were found among those older than 30 years, those with university education prior to nursing education, and those working in community health care. Nurse leaders and nurse teachers should encourage and nurture critical thinking among newly graduated nurses and nursing students. The low Truth-seeking scores found may be a result of traditional teaching strategies in nursing education and might indicate a need for more student-active learning models. © 2010 The Authors. Journal of Advanced Nursing © 2010 Blackwell Publishing Ltd.

The ecological and construct validity of a newly developed measure of executive function: the Virtual Library Task.

Science.gov (United States)

Renison, Belinda; Ponsford, Jennie; Testa, Renee; Richardson, Barry; Brownfield, Kylie

2012-05-01

Virtual reality (VR) assessment paradigms have the potential to address the limited ecological validity of pen and paper measures of executive function (EF) and the pragmatic and reliability issues associated with functional measures. To investigate the ecological validity and construct validity of a newly developed VR measure of EF, the Virtual Library Task (VLT); a real life analogous task--the Real Library Task (RLT); and five neuropsychological measures of EF were administered to 30 patients with traumatic brain injury (TBI) and 30 healthy Controls. Significant others for each participant also completed the Dysexecutive Questionnaire (DEX), which is a behavioral rating scale of everyday EF. Performances on the VLT and the RLT were significantly positively correlated indicating that VR performance is similar to real world performance. The TBI group performed significantly worse than the Control group on the VLT and the Modified Six Elements Test (MSET) but the other four neuropsychological measures of EF failed to differentiate the groups. Both the MSET and the VLT significantly predicted everyday EF suggesting that they are both ecologically valid tools for the assessment of EF. The VLT has the advantage over the MSET of providing objective measurement of individual components of EF.

Nilotinib versus imatinib for newly diagnosed chronic myeloid leukemia

DEFF Research Database (Denmark)

Saglio, Giuseppe; Kim, Dong-Wook; Issaragrisil, Surapol

2010-01-01

Nilotinib has been shown to be a more potent inhibitor of BCR-ABL than imatinib. We evaluated the efficacy and safety of nilotinib, as compared with imatinib, in patients with newly diagnosed Philadelphia chromosome-positive chronic myeloid leukemia (CML) in the chronic phase.......Nilotinib has been shown to be a more potent inhibitor of BCR-ABL than imatinib. We evaluated the efficacy and safety of nilotinib, as compared with imatinib, in patients with newly diagnosed Philadelphia chromosome-positive chronic myeloid leukemia (CML) in the chronic phase....

Transformation of organic N newly added to red soil treated with different cultural practices

Institute of Scientific and Technical Information of China (English)

ZhangQin－Zheng; YeQing－Fu; 等

1998-01-01

By using 15N tracer method,transformation of organic N,which wqas newly added to red soil treated with different cultural practices,was studied under thelaboratory incubation condition.The experimental results showed that the transformation of N from newly added organic matter and soil native pool during incubation was influenced by cultural practice treatment beforeincubation.Fallow was favorable to the mineralization of newly added organic N and soil N compared with the planting wheat treatment.Planting wheat greatly increased the loss of soil N.Application of fertilizers stimulated the mineralization of newly added organic N and application of organic matter reduced the mineralization,but stimulated microbialtransformation of newly adde4d organic N.

UCSD SORT Test (U-SORT): Examination of a newly developed organizational skills assessment tool for severely mentally ill adults.

Science.gov (United States)

Tiznado, Denisse; Mausbach, Brent T; Cardenas, Veronica; Jeste, Dilip V; Patterson, Thomas L

2010-12-01

The present investigation examined the validity of a new cognitive test intended to assess organizational skills. Participants were 180 middle-aged or older participants with a Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition diagnosis of schizophrenia or schizoaffective disorder. Participants' organizational skills were measured using our newly developed University of California, San Diego Sorting Test (U-SORT), a performance-based test of organizational ability in which subjects sort objects (e.g., battery, pens) from a "junk drawer" into "keep" versus "trash" piles. Significant correlations between U-SORT scores and theoretically similar constructs (i.e. functional capacity, cognitive functioning, and clinical symptoms) were acceptable (mean r = 0.34), and weak correlations were found between U-SORT scores and theoretically dissimilar constructs (e.g., health symptoms, social support, gender; mean r = 0.06 ). The correlation between assessment scores provides preliminary support for the U-SORT test as a brief, easily transportable, reliable, and valid measure of functioning for this population.

Development of a one-step RT-PCR assay for detection of pancoronaviruses (α-, β-, γ-, and δ-coronaviruses) using newly designed degenerate primers for porcine and avian `fecal samples.

Science.gov (United States)

Hu, Hui; Jung, Kwonil; Wang, Qiuhong; Saif, Linda J; Vlasova, Anastasia N

2018-06-01

Coronaviruses (CoVs) are critical human and animal pathogens because of their potential to cause severe epidemics of respiratory or enteric diseases. In pigs, the newly emerged porcine deltacoronavirus (PDCoV) and re-emerged porcine epidemic diarrhea virus (PEDV) reported in the US and Asia, as well as the discovery of novel CoVs in wild bats or birds, has necessitated development of improved detection and control measures for these CoVs. Because the previous pancoronavirus (panCoV) RT-PCR established in our laboratory in 2007-2011 did not detect deltacoronaviruses (δ-CoVs) in swine fecal and serum samples, our goal was to develop a new panCoV RT-PCR assay to detect known human and animal CoVs, including δ-CoVs. In this study, we designed a new primer set to amplify a 668 bp-region within the RNA-dependent RNA polymerase (RdRP) gene that encodes the most conserved protein domain of α-, β-, γ-, and δ-CoVs. We established a one-step panCoV RT-PCR assay and standardized the assay conditions. The newly established panCoV RT-PCR assay was demonstrated to have a high sensitivity and specificity. Using a panel of 60 swine biological samples (feces, intestinal contents, and sera) characterized by PEDV, PDCoV and transmissible gastroenteritis virus-specific RT-PCR assays, we demonstrated that sensitivity and specificity of the newly established panCoV RT-PCR assay were 100%. 400 avian fecal (RNA) samples were further tested simultaneously for CoV by the new panCoV RT-PCR and a one-step RT-PCR assay with the δ-CoV nucleocapsid-specific universal primers. Four of 400 avian samples were positive for CoV, three of which were positive for δ-CoV by the conventional RT-PCR. PanCoV RT-PCR fragments for 3 of the 4 CoVs were sequenced. Phylogenetic analysis revealed the presence of one γ-CoV and two δ-CoV in the sequenced samples. The newly designed panCoV RT-PCR assay should be useful for the detection of currently known CoVs in animal biological samples. Copyright © 2018

Efficacy of Topical Therapy with Newly Developed Terbinafine and Econazole Formulations in the Treatment of Dermatophytosis in Cats.

Science.gov (United States)

Ivaskiene, M; Matusevicius, A P; Grigonis, A; Zamokas, G; Babickaite, L

2016-09-01

In the field of veterinary dermatology dermatophytosis is one of the most frequently occurring infectious diseases, therefore its treatment should be effective, convenient, safe and inexpensive. The aim of this study was to evaluate the efficacy of newly developed topical formulations in the treatment of cats with dermatophytosis. Evaluation of clinical efficacy and safety of terbinafine and econazole formulations administered topically twice a day was performed in 40 cats. Cats, suffering from the most widely spread Microsporum canis-induced dermatophytosis and treated with terbinafine hydrochloride 1% cream, recovered within 20.3±0.88 days; whereas when treated with econazole nitrate 1% cream, they recovered within 28.4±1.14 days. A positive therapeutic effect was yielded by combined treatment with local application of creams and whole coat spray with enilconazole 0.2% emulsion "Imaverol". Most cats treated with econazole cream revealed redness and irritation of the skin at the site of application. This study demonstrates that terbinafine tended to have superior clinical efficacy (p<0.001) in the treatment of dermatophytosis in cats compared to the azole tested.

Design of a statically balanced fully compliant grasper

NARCIS (Netherlands)

Lamers, A.J.; Gallego Sanchez, J.A.; Herder, Justus Laurens

2015-01-01

Monolithic and thus fully compliant surgical graspers are promising when they provide equal or better force feedback than conventional graspers. In this work for the first time a fully compliant grasper is designed to exhibit zero stiffness and zero operation force. The design problem is addressed

Identification of flow structures in fully developed canonical and wavy channels by means of modal decomposition techniques

Science.gov (United States)

Ghebali, Sacha; Garicano-Mena, Jesús; Ferrer, Esteban; Valero, Eusebio

2018-04-01

A Dynamic Mode Decomposition (DMD) of Direct Numerical Simulations (DNS) of fully developed channel flows is undertaken in order to study the main differences in flow features between a plane-channel flow and a passively “controlled” flow wherein the mean friction was reduced relative to the baseline by modifying the geometry in order to generate a streamwise-periodic spanwise pressure gradient, as is the case for an oblique wavy wall. The present analysis reports POD and DMD modes for the plane channel, jointly with the application of a sparsity-promoting method, as well as a reconstruction of the Reynolds shear stress with the dynamic modes. Additionally, a dynamic link between the streamwise velocity fluctuations and the friction on the wall is sought by means of a composite approach both in the plane and wavy cases. One of the DMD modes associated with the wavy-wall friction exhibits a meandering motion which was hardly identifiable on the instantaneous friction fluctuations.

Coping strategies among patients with newly diagnosed amyotrophic lateral sclerosis.

Science.gov (United States)

Jakobsson Larsson, Birgitta; Nordin, Karin; Askmark, Håkan; Nygren, Ingela

2014-11-01

To prospectively identify different coping strategies among newly diagnosed amyotrophic lateral sclerosis patients and whether they change over time and to determine whether physical function, psychological well-being, age and gender correlated with the use of different coping strategies. Amyotrophic lateral sclerosis is a fatal disease with impact on both physical function and psychological well-being. Different coping strategies are used to manage symptoms and disease progression, but knowledge about coping in newly diagnosed amyotrophic lateral sclerosis patients is scarce. This was a prospective study with a longitudinal and descriptive design. A total of 33 patients were included and evaluation was made at two time points, one to three months and six months after diagnosis. Patients were asked to complete the Motor Neuron Disease Coping Scale and the Hospital Anxiety and Depression Scale. Physical function was estimated using the revised Amyotrophic Lateral Sclerosis Functional Rating Scale. The most commonly used strategies were support and independence. Avoidance/venting and information seeking were seldom used at both time points. The use of information seeking decreased between the two time points. Men did not differ from women, but patients ≤64 years used positive action more often than older patients. Amyotrophic Lateral Sclerosis Functional Rating Scale was positively correlated with positive action at time point 1, but not at time point 2. Patients' psychological well-being was correlated with the use of different coping strategies. Support and independence were the most used coping strategies, and the use of different strategies changed over time. Psychological well-being was correlated with different coping strategies in newly diagnosed amyotrophic lateral sclerosis patients. The knowledge about coping strategies in early stage of the disease may help the nurses to improve and develop the care and support for these patients. © 2014 John Wiley

Effect of mulching systems on fruit quality and phytochemical composition of newly developed strawberry lines

Directory of Open Access Journals (Sweden)

Li Fan

2012-06-01

Full Text Available The effects of three mulching systems on total yield, average yield per plant, average fruit weight, soluble solids content (SSC, titratable acidity (TA, firmness and oxygen radical absorbance capacity (ORAC of two newly developed lines (‘Orléans’ and ‘Saint Pierre’, one advanced selection (‘SJ8976-1’ and two commonly used cultivars (‘Jewel’ and ‘Kent’ were evaluated. The studied mulching systems were: plastic mulch (PM, mulch with row cover (PMRC, and matted-row system (MRS. Results showed that plastic mulch with row cover (PMRC generally increased yield per plant, average fruit weight, SSC, firmness and ORAC, but differences varied within harvest times. No significant differences in total yield and TA were observed under the selected mulching systems. Both PMRC and PM accelerated the harvest periods compared to MRS. ‘Kent’ and ‘Jewel’ had the highest total yield while ‘SJ8976-1’ and ‘St-Pierre’ had the highest average fruit weight. The highest SSC, TA and ORAC were found in ‘Jewel’. There was no interaction between the mulching systems and genotypes, indicating that the effect of production system is independent of cultivars. PMRC seems to be a better growing system, improving fruit quality and increasing the nutritional value of all genotypes. By allowing off-season fruit production in cool climates, PMRC can be an alternative method to the costly high tunnels.

A fully implantable rodent neural stimulator

Science.gov (United States)

Perry, D. W. J.; Grayden, D. B.; Shepherd, R. K.; Fallon, J. B.

2012-02-01

The ability to electrically stimulate neural and other excitable tissues in behaving experimental animals is invaluable for both the development of neural prostheses and basic neurological research. We developed a fully implantable neural stimulator that is able to deliver two channels of intra-cochlear electrical stimulation in the rat. It is powered via a novel omni-directional inductive link and includes an on-board microcontroller with integrated radio link, programmable current sources and switching circuitry to generate charge-balanced biphasic stimulation. We tested the implant in vivo and were able to elicit both neural and behavioural responses. The implants continued to function for up to five months in vivo. While targeted to cochlear stimulation, with appropriate electrode arrays the stimulator is well suited to stimulating other neurons within the peripheral or central nervous systems. Moreover, it includes significant on-board data acquisition and processing capabilities, which could potentially make it a useful platform for telemetry applications, where there is a need to chronically monitor physiological variables in unrestrained animals.

Application of newly developed Fluoro-QC software for image quality evaluation in cardiac X-ray systems.

Science.gov (United States)

Oliveira, M; Lopez, G; Geambastiani, P; Ubeda, C

2018-05-01

A quality assurance (QA) program is a valuable tool for the continuous production of optimal quality images. The aim of this paper is to assess a newly developed automatic computer software for image quality (IR) evaluation in fluoroscopy X-ray systems. Test object images were acquired using one fluoroscopy system, Siemens Axiom Artis model (Siemens AG, Medical Solutions Erlangen, Germany). The software was developed as an ImageJ plugin. Two image quality parameters were assessed: high-contrast spatial resolution (HCSR) and signal-to-noise ratio (SNR). The time between manual and automatic image quality assessment procedures were compared. The paired t-test was used to assess the data. p Values of less than 0.05 were considered significant. The Fluoro-QC software generated faster IQ evaluation results (mean = 0.31 ± 0.08 min) than manual procedure (mean = 4.68 ± 0.09 min). The mean difference between techniques was 4.36 min. Discrepancies were identified in the region of interest (ROI) areas drawn manually with evidence of user dependence. The new software presented the results of two tests (HCSR = 3.06, SNR = 5.17) and also collected information from the DICOM header. Significant differences were not identified between manual and automatic measures of SNR (p value = 0.22) and HCRS (p value = 0.46). The Fluoro-QC software is a feasible, fast and free to use method for evaluating imaging quality parameters on fluoroscopy systems. Copyright © 2017 The College of Radiographers. Published by Elsevier Ltd. All rights reserved.

Possible origin of Saturn's newly discovered outer ring

International Nuclear Information System (INIS)

Moehlmann, D.

1986-01-01

Within a planetogonic model the self-gravitationally caused formation of pre-planetary and pre-satellite rings from an earlier thin disk is reported. The theoretically derived orbital radii of these rings are compared with the orbital levels in the planetary system and the satellite systems of Jupiter, Saturn and Uranus. From this comparison it is concluded that at the radial position of Saturn's newly discovered outer ring an early pre-satellite ring of more or less evolved satellites could have existed. These satellites should have been disturbed in their evolution by the gravitation of the neighbouring massive satellite Titan. The comparison also may indicate similarities between the asteroidal belt and the newly discovered outer ring of Saturn

Oral Cancer Knowledge Assessment: Newly Graduated versus Senior Dental Clinicians

Science.gov (United States)

Salgado de Souza, Ricardo; Gallego Arias Pecorari, Vanessa; Lauria Dib, Luciano

2018-01-01

The present study assessed the level of dentists' knowledge regarding oral cancer in the city of São Paulo, Brazil. A questionnaire was used to compare the level of knowledge among newly graduated and senior clinicians. A total of 20,154 e-mails were correctly delivered to the dentists registered in the database of the Regional Dentistry Council of São Paulo, and 477 (2.36%) responses were received. This sample consisted of 84 newly graduated clinicians and 105 senior clinicians. For the statistical analysis, the chi-square test and the logistic regression analysis were performed with α = 0.05, and the results were described herein. According to their knowledge level, the results were statistically different between the groups, since 19% of the newly graduated clinicians were evaluated with knowledge grade A (excellent) in comparison to 6.7% of the senior clinicians. In spite of the results indicated that newly graduated clinicians' knowledge regarding oral cancer was 2.1 times higher, 34.5% of the professionals in this group had regular or poor knowledge on the subject, and several questions relating to clinical characteristics and risk factors indicated that there still exist some knowledge gaps, demonstrating that there is a need for further studies and information activities addressing oral cancer. PMID:29666649

Microbial Community Composition of Polyhydroxyalkanoate-Accumulating Organisms in Full-Scale Wastewater Treatment Plants Operated in Fully Aerobic Mode

Science.gov (United States)

Oshiki, Mamoru; Onuki, Motoharu; Satoh, Hiroyasu; Mino, Takashi

2013-01-01

The removal of biodegradable organic matter is one of the most important objectives in biological wastewater treatments. Polyhydroxyalkanoate (PHA)-accumulating organisms (PHAAOs) significantly contribute to the removal of biodegradable organic matter; however, their microbial community composition is mostly unknown. In the present study, the microbial community composition of PHAAOs was investigated at 8 full-scale wastewater treatment plants (WWTPs), operated in fully aerobic mode, by fluorescence in situ hybridization (FISH) analysis and post-FISH Nile blue A (NBA) staining techniques. Our results demonstrated that 1) PHAAOs were in the range of 11–18% in the total number of cells, and 2) the microbial community composition of PHAAOs was similar at the bacterial domain/phylum/class/order level among the 8 full-scale WWTPs, and dominant PHAAOs were members of the class Alphaproteobacteria and Betaproteobacteria. The microbial community composition of α- and β-proteobacterial PHAAOs was examined by 16S rRNA gene clone library analysis and further by applying a set of newly designed oligonucleotide probes targeting 16S rRNA gene sequences of α- or β-proteobacterial PHAAOs. The results demonstrated that the microbial community composition of PHAAOs differed in the class Alphaproteobacteria and Betaproteobacteria, which possibly resulted in a different PHA accumulation capacity among the WWTPs (8.5–38.2 mg-C g-VSS−1 h−1). The present study extended the knowledge of the microbial diversity of PHAAOs in full-scale WWTPs operated in fully aerobic mode. PMID:23257912

Quantification of Fusarium oxysporum in fumigated soils by a newly developed real-time PCR assay to assess the efficacy of fumigants for Fusarium wilt disease in strawberry plants.

Science.gov (United States)

Li, Yuan; Mao, Liangang; Yan, Dongdong; Ma, Taotao; Shen, Jin; Guo, Meixia; Wang, Qiuxia; Ouyang, Canbin; Cao, Aocheng

2014-11-01

Two soil fumigants, chloropicrin (CP) and dimethyl disulfide (DMDS), were used to control Fusarium wilt disease (FWD) which caused large economic losses in strawberries. The fumigants were evaluated alone and in combination in a laboratory study and in strawberry greenhouses. Laboratory tests found that combinations of CP and DMDS indicated a positive synergistic activity on Fusarium oxysporum. A newly developed quantitative assay for F. oxysporum involving real-time PCR was used successfully to evaluate F. oxysporum control by the fumigants; it provided similar results to the selective medium but was less time-consuming and less labor intensive. Greenhouse trials revealed that the combination of CP and DMDS successfully suppressed the incidence of FWD and sharply reduced the population density of F. oxysporum, which significantly increased fruit branch number and maintained a good strawberry yield, higher than methyl bromide (MB) treatment. All of the treatments provided significantly better results than the non-treated control. This study confirms that the newly developed real-time PCR quantitative assay for F. oxysporum was suitable for the control efficacy evaluation of soil fumigants and that the novel fumigant combination of CP and DMDS offers a promising effective alternative to MB for the control of F. oxysporum in strawberry greenhouses. © 2013 Society of Chemical Industry.

Career Motivation in Newly Licensed Registered Nurses: What Makes Them Remain

Science.gov (United States)

Banks, Zarata Mann; Bailey, Jessica H.

2010-01-01

Despite vast research on newly licensed registered nurses (RNs), we don't know why some newly licensed registered nurses remain in their current jobs and others leave the nursing profession early in their career. Job satisfaction, the most significant factor emerging from the literature, plays a significant role in nurses' decisions to remain in…

PREVALENCE OF DIABETIC RETINOPATHY IN PATIENTS WITH NEWLY DIAGNOSED TYPE II DIABETES MELLITUS

Directory of Open Access Journals (Sweden)

A. Bostak

2006-11-01

Full Text Available Diabetic retinopathy is a common complication of type II diabetes mellitus and carries with it the threat of blindness. Accurate information regarding the incidence of diabetic retinopathy and associated risk factors is important in the prevention of its development and of the visual impairment caused by this complication. This study was designed to determine the prevalence of diabetic retinopathy in newly diagnosed patients with type II diabetes mellitus. We have also evaluated the association of diabetic retinopathy with clinical and biochemical variables. In a cross-sectional study, 152 consecutive patients with newly diagnosed type II diabetes mellitus were referred from two outpatient clinics in Tehran for ophthalmologic exam to detect retinopathy. Indirect ophthalmoscopy was performed and data regarding risk factors were extracted from routine medical records. Chi square and Mann Whitney U tests were used to analyze the data. The overall prevalence of diabetic retinopathy was 13.8 %( 21 cases: three cases with microaneurysm only, 10 with mild, 5 with moderate and 2 with severe non proliferative diabetic retinopathy. Only one patient had advanced proliferative retinopathy. The prevalence of diabetic retinopathy was positively associated with age, duration of disease, fasting plasma glucose, HbA1c, and systolic blood pressure. Diabetic retinopathy is common in newly diagnosed type II diabetes mellitus patients. Ophthalmologic consultation is essential at the time of diagnosis for all patients.

Meeting and activating the newly unemployed

DEFF Research Database (Denmark)

Rotger, Gabriel Pons

-demanding activity. As intensive activation is usually accompanied by intensive search monitoring, it is important to disentangling the contribution of the costly activation programs from that of caseworker meetings. Using Danish data for the period 2010-13, the paper shows that requiring newly unemployed intensive...... activation, contrary to job search meetings, reduces employment and increases sickness benefit claims....

Improved Spatial Resolution in Thick, Fully-Depleted CCDs withEnhanced Red Sensitivity

Energy Technology Data Exchange (ETDEWEB)

Fairfield, Jessamyn A.

2005-11-10

The point spread function (PSF) is an important measure ofspatial resolution in CCDs for point-like objects, since it can affectuse in imaging and spectroscopic applications. We present new data andtheoretical developments in the study of lateral charge diffusion inthick, fully-depleted charge-coupled devices (CCDs) developed at LawrenceBerkeley National Laboratory (LBNL). Because they are fully depleted, theLBNL devices have no field-free region, and diffusion can be controlledthrough the application of an external bias voltage. We give results fora 3512x3512 format, 10.5 ?m pixel back-illuminated p-channel CCDdeveloped for the SuperNova/ Acceleration Probe (SNAP), a proposedsatellite-based experiment designed to study dark energy. The PSF wasmeasured at substrate bias voltages between 3 V and 115 V. At a biasvoltage of 115V, we measure an rms diffusion of 3.7 +- 0.2 ?m. Lateralcharge diffusion in LBNL CCDs is thus expected to meet the SNAPrequirements.

Deep Fully Convolutional Networks for the Detection of Informal Settlements in VHR Images

NARCIS (Netherlands)

Persello, Claudio; Stein, Alfred

2017-01-01

This letter investigates fully convolutional networks (FCNs) for the detection of informal settlements in very high resolution (VHR) satellite images. Informal settlements or slums are proliferating in developing countries and their detection and classification provides vital information for

Special Issue: Planar Fully-Depleted SOI technology

Science.gov (United States)

Allibert, F.; Hiramoto, T.; Nguyen, B. Y.

2016-03-01

We are in the era of mobile computing with smart handheld devices and remote data storage "in the cloud," with devices that are almost always on and driven by needs of high data transmission rate, instant access/connection and long battery life. With all the ambitious requirements for better performance with lower power consumption, the SoC solution must also be cost-effective in order to capture the large, highly-competitive consumer mobile and wearable markets. The Fully-Depleted SOI device/circuit is a unique option that can satisfy all these requirements and has made tremendous progress in development for various applications and adoption by foundries, integrated device manufacturers (IDM), and fabless companies in the last 3 years.

Preceptors' perceptions of the elements of a successful and an unsuccessful orientation period for newly graduated nurses.

Science.gov (United States)

Lindfors, Kirsi; Meretoja, Riitta; Kaunonen, Marja; Paavilainen, Eija

2018-04-01

To identify existing orientation patterns and to find elements that may enhance or impede successful orientation of newly graduated nurses. Preceptors have first-hand information concerning orientation and their opinions should not be forgotten when organisations develop their orientation processes. An open-ended questionnaire was undertaken to collect data from preceptors (n = 172) about the current orientation patterns. Data were analysed by using deductive content analysis and by quantifying the phrases. Communal commitment to the orientation process, strong professional orientation know-how and supportive leadership were the enhancing elements of successful orientation. Complex interpersonal relationship problems during orientation, inadequate orientation resources and the organisation's structural and functional problems were the impeding elements of successful orientation. With the elements of successful orientation we ensure a supportive transition to practice for newly graduate nurses and possibilities to focus on good orientation practices for preceptors. Nurse leaders play an important part in ensuring newly graduated nurses have a safe nursing career starting point and, for preceptors, opportunities to provide orientation that is as good as possible. Supportive leadership, sufficient resources and good interpersonal relationships should be the leading principles during newly graduated nurses' orientation period. © 2017 John Wiley & Sons Ltd.

Bioorthogonal Chemistry for the Isolation and Study of Newly Synthesized Histones and Their Modifications.

Science.gov (United States)

Arnaudo, Anna M; Link, A James; Garcia, Benjamin A

2016-03-18

The nucleosome is an octamer containing DNA wrapped around one histone H3-H4 tetramer and two histone H2A-H2B dimers. Within the nucleosome, histones are decorated with post-translational modifications. Previous studies indicate that the H3-H4 tetramer is conserved during DNA replication, suggesting that old tetramers serve as a template for the modification of newly synthesized tetramers. Here, we present a method that merges bioorthogonal chemistry with mass spectrometry for the study of modifications on newly synthesized histones in mammalian cells. HeLa S3 cells are dually labeled with the methionine analog azidohomoalanine and heavy (13)C6,(15)N4 isotope labeled arginine. Heavy amino acid labeling marks newly synthesized histones while azidohomoalanine incorporation allows for their isolation using bioorthogonal ligation. Labeled mononucleosomes were covalently linked via a copper catalyzed reaction to a FLAG-GGR-alkyne peptide, immunoprecipitated, and subjected to mass spectrometry for quantitative modification analysis. Mononucleosomes containing new histones were successfully isolated using this approach. Additionally, the development of this method highlights the potential deleterious effects of azidohomoalanine labeling on protein PTMs and cell cycle progression, which should be considered for future studies utilizing bioorthogonal labeling strategies in mammalian cells.

Quality of life in newly diagnosed children with specific learning disabilities (SpLD) and differences from typically developing children: a study of child and parent reports.

Science.gov (United States)

Ginieri-Coccossis, M; Rotsika, V; Skevington, S; Papaevangelou, S; Malliori, M; Tomaras, V; Kokkevi, A

2013-07-01

Research on quality of life (QoL) of school children with specific learning disabilities (SpLD) and their parents is scarce. The present study explores QoL deficits in newly diagnosed children with SpLD and their parents, in comparison to a similar age group of typically developing children. Possible associations between parental and child QoL were statistically explored in both groups of children. 70 newly diagnosed children with SpLD [International Classification of Diseases-10 (ICD-10) criteria] (38 boys, 32 girls, mean age 10.1 years) and a control group of 69 typically developing children of the same age (40 boys, 29 girls, mean age 10.6 years) were recruited. Children were of normal intelligence quotient, attending mainstream schools. Their parents were also recruited so a child's scores could be associated with corresponding parental scores (mother or father). Children's QoL was assessed by the German questionnaire for measuring quality of life in children and adolescents (KINDL(R) ) questionnaire and parental QoL by World Health Organization Quality of Life brief questionnaire (WHOQOL-BREF) of the World Health Organization. Children with SpLD in comparison to typically developing children reported according to the KINDL(R) measurement poorer emotional well-being, lower self-esteem and satisfaction in their relationships with family and friends. Surprisingly, school functioning was not reported by these children as an area of concern. Parents of children with SpLD indicated experiencing lower satisfaction in the WHOQOL-BREF domains of social relationships and environment. Correlational and regression analysis with parental-child QoL scores provided evidence that in the SpLD group, parental scores on WHOQOL-BREF social relationships and psychological health domains could be predictors of the child's emotional well-being, satisfaction with family, friends and school functioning. Stepwise regression analysis verified the effect of parents' WHOQOL-BREF social

An Experimental Study on Dynamics of a Novel Dual-Belt Continuous Variable Transmission Based on a Newly Developed Test Rig

Directory of Open Access Journals (Sweden)

Pak Kin Wong

2015-01-01

Full Text Available A novel dual-belt Van Doorne’s continuous variable transmission (DBVCVT system, which is applicable to heavy-duty vehicles, has been previously proposed by the authors in order to improve the low torque capacity of traditional single-belt CVT. This DBVCVT is a novel design among continuously variable transmissions and is necessary to be prototyped for experimental study, and the analytical dynamic model for this DBVCVT also needs to be experimentally validated. So, this work originally fabricated a prototype of DBVCVT and integrates this prototype to a light-load hardware-in-the-loop test rig by replacing the engine and load equipment with the AC motor and magnetic powder dynamometer. Moreover, with the use of this newly developed test rig, this work implements the experimental study of this DBVCVT for the first time. The comparison of experimental and simulation results validates the previously proposed analytical model for DBVCVT, and some basic characteristics of the DBVCVT in terms of the reliability, speed ratio, and transmission efficiency are also experimentally studied. In all, this developed test rig with the analytical model lays the foundation for further study on this novel DBVCVT.

Clinical heterogeneity in newly diagnosed Parkinson's disease

NARCIS (Netherlands)

Post, Bart; Speelman, Johannes D.; de Haan, Rob J.

2008-01-01

OBJECTIVE: To determine clinical heterogeneity in newly diagnosed Parkinson's disease using cluster analysis and to describe the subgroups in terms of impairment, disability, perceived quality of life, and use of dopaminergic therapy. METHODS: We conducted a k-means cluster analysis in a prospective

The development and impact of active learning strategies on self-confidence in a newly designed first-year self-care pharmacy course - outcomes and experiences.

Science.gov (United States)

Smith, Kathryn J; Grundmann, Oliver; Li, Robin Moorman

2018-04-01

The primary objective of this investigation was to determine the effectiveness of different active learning exercises in a newly-designed flipped-classroom self-care course in applying newly acquired knowledge of self-care and improving the confidence of first-year pharmacy students to recommend self-care treatments and counsel patients. The early development of these skills is essential for the subsequent Community Introductory Pharmacy Practice Experience (CIPPE). An unpaired anonymous survey was administered to students, pre- and post-course, to ascertain their opinions on the effectiveness of various teaching strategies and active learning exercises on learning and on their confidence in treatment-planning and patient counseling for self-care patients. Comparison between pre- and post-course Likert scores was conducted using a one-way ANOVA followed by a post-hoc Tukey's test with significance at p = 0.05. All other tests of significance were conducted using a student's t-test with significance at p = 0.05. Students' self-confidence in developing treatment plans and in counseling for non-prescription drugs and dietary supplements significantly improved from the beginning to the end of this self-care course. The response rate was high in both the pre- (N = 208, 88.1%) and post- (N = 198, 83.9%) course surveys. The positive change in confidence was not reflected in increased performance on the final exam represented by a lower average score than the midterm exam. Active learning sessions and the flipped classroom approach in this first-year pharmacy self-care course contributed to increased self-confidence in making recommendations and counseling patients on proper use of nonprescription medications and dietary supplements. Copyright © 2017 Elsevier Inc. All rights reserved.

Comparison of two theory-based, fully automated telephone interventions designed to maintain dietary change in healthy adults: study protocol of a three-arm randomized controlled trial.

Science.gov (United States)

Wright, Julie A; Quintiliani, Lisa M; Turner-McGrievy, Gabrielle M; Migneault, Jeffrey P; Heeren, Timothy; Friedman, Robert H

2014-11-10

Health behavior change interventions have focused on obtaining short-term intervention effects; few studies have evaluated mid-term and long-term outcomes, and even fewer have evaluated interventions that are designed to maintain and enhance initial intervention effects. Moreover, behavior theory has not been developed for maintenance or applied to maintenance intervention design to the degree that it has for behavior change initiation. The objective of this paper is to describe a study that compared two theory-based interventions (social cognitive theory [SCT] vs goal systems theory [GST]) designed to maintain previously achieved improvements in fruit and vegetable (F&V) consumption. The interventions used tailored, interactive conversations delivered by a fully automated telephony system (Telephone-Linked Care [TLC]) over a 6-month period. TLC maintenance intervention based on SCT used a skills-based approach to build self-efficacy. It assessed confidence in and barriers to eating F&V, provided feedback on how to overcome barriers, plan ahead, and set goals. The TLC maintenance intervention based on GST used a cognitive-based approach. Conversations trained participants in goal management to help them integrate their newly acquired dietary behavior into their hierarchical system of goals. Content included goal facilitation, conflict, shielding, and redundancy, and reflection on personal goals and priorities. To evaluate and compare the two approaches, a sample of adults whose F&V consumption was below public health goal levels were recruited from a large urban area to participate in a fully automated telephony intervention (TLC-EAT) for 3-6 months. Participants who increase their daily intake of F&V by ≥1 serving/day will be eligible for the three-arm randomized controlled trial. A sample of 405 participants will be randomized to one of three arms: (1) an assessment-only control, (2) TLC-SCT, and (3) TLC-GST. The maintenance interventions are 6 months. All 405

A new system for fully automatic inspection of digital flat-panel detector radiographs of aluminium castings

International Nuclear Information System (INIS)

Fuchs, T.; Hassler, U.; Huetten, U.; Wenzel, T.

2006-01-01

The aim of our work was the integration of various newly-developed methods into a system for fully automatic radioscopic inspection of arbitrary casting parts. Using a 16-bit flat-panel detector, projections in arbitrary directions through the part are acquired and analysed. The software tool for inspection can be separated into five stages: registration, calibration, image processing, fault segmentation, and quality assessment. Thereby, each step is realized with full 16-bit data processing. Within the first processing stage, information about the physical length and density of the aluminium structures is extracted from the primary projections. Next, the primary image is registered with a reference image, which was acquired previously. Afterwards, the third stage combines both reference image-based and reference-less testing. A filter is applied, which adapts automatically to the local object structure by referring to the properties of the reference. Thereby, the self-adapting filter selects its size, direction and filter method optimally according to the local situation. Similar to the reference-less procedure, a subtraction is followed by a threshold operation, resulting in a map of regions that are suspected to be faulty. The fourth step aims at an elimination of false-positive detections. Again, two methods are applied successively: evaluation of local image features at suspicious positions and a classification based on teachings independent of position and orientation of the faults. Within the last step the quality criteria are applied. These criteria may concern fault size and depth, the density of faults in critical regions and a minimum distance between two or more faults. (orig.)

[Principles of nutrition in patients with newly appointed stoma].

Science.gov (United States)

Pachocka, Lucyna Małgorzata; Urbanik, Anna

2016-01-01

The treatment of intestinal stoma is often a difficult experience for patients and results in numerous problems in the physical, psychological and social aspects. Therefore, post-operative care of the patient with the newly appointed stoma should be taken by therapeutic team consisting of doctors, nurses, physiotherapists, dieticians, psychologists and social workers. Appropriate nutritional education of patients aims to improve their quality of life and to prevent from unpleasant ailments formed after the operation. The specific type of stoma may decide about certain dietary recommendations. The presented work provides a practical dietary recommendations for patients with newly appointed stoma.

Android Fully Loaded

CERN Document Server

Huddleston, Rob

2012-01-01

Fully loaded with the latest tricks and tips on your new Android! Android smartphones are so hot, they're soaring past iPhones on the sales charts. And the second edition of this muscular little book is equally impressive--it's packed with tips and tricks for getting the very most out of your latest-generation Android device. Start Facebooking and tweeting with your Android mobile, scan barcodes to get pricing and product reviews, download your favorite TV shows--the book is positively bursting with practical and fun how-tos. Topics run the gamut from using speech recognition, location-based m

Two Newly Discovered Plants in Taiwan

OpenAIRE

Tian-Chuan Hsu; Jia-Jung Lin; Shih-Wen Chung

2009-01-01

Two herbs are newly discovered in Taiwan. Limnophila fragrans (G. Forst.) Seem. (Scrophulariaceae), native in SE Asia, is recognized from southern lowlands. Anagallis minima (L.) E. H. L. Krause (Primulaceae), native in N America and Europe, was found from northern mountainous region at low altitudes. In this study, descriptions, line drawings, color photos and a distribution map of the two species are provided.

Newly-formed emotional memories guide selective attention processes: Evidence from event-related potentials.

Science.gov (United States)

Schupp, Harald T; Kirmse, Ursula; Schmälzle, Ralf; Flaisch, Tobias; Renner, Britta

2016-06-20

Emotional cues can guide selective attention processes. However, emotional stimuli can both activate long-term memory representations reflecting general world knowledge and engage newly formed memory representations representing specific knowledge from the immediate past. Here, the self-completion feature of associative memory was utilized to assess the regulation of attention processes by newly-formed emotional memory. First, new memory representations were formed by presenting pictures depicting a person either in an erotic pose or as a portrait. Afterwards, to activate newly-built memory traces, edited pictures were presented showing only the head region of the person. ERP recordings revealed the emotional regulation of attention by newly-formed memories. Specifically, edited pictures from the erotic compared to the portrait category elicited an early posterior negativity and late positive potential, similar to the findings observed for the original pictures. A control condition showed that the effect was dependent on newly-formed memory traces. Given the large number of new memories formed each day, they presumably make an important contribution to the regulation of attention in everyday life.

Newly-formed emotional memories guide selective attention processes: Evidence from event-related potentials

Science.gov (United States)

Schupp, Harald T.; Kirmse, Ursula; Schmälzle, Ralf; Flaisch, Tobias; Renner, Britta

2016-01-01

Emotional cues can guide selective attention processes. However, emotional stimuli can both activate long-term memory representations reflecting general world knowledge and engage newly formed memory representations representing specific knowledge from the immediate past. Here, the self-completion feature of associative memory was utilized to assess the regulation of attention processes by newly-formed emotional memory. First, new memory representations were formed by presenting pictures depicting a person either in an erotic pose or as a portrait. Afterwards, to activate newly-built memory traces, edited pictures were presented showing only the head region of the person. ERP recordings revealed the emotional regulation of attention by newly-formed memories. Specifically, edited pictures from the erotic compared to the portrait category elicited an early posterior negativity and late positive potential, similar to the findings observed for the original pictures. A control condition showed that the effect was dependent on newly-formed memory traces. Given the large number of new memories formed each day, they presumably make an important contribution to the regulation of attention in everyday life. PMID:27321471

Fully phase-encoded MRI near metallic implants using ultrashort echo times and broadband excitation.

Science.gov (United States)

Wiens, Curtis N; Artz, Nathan S; Jang, Hyungseok; McMillan, Alan B; Koch, Kevin M; Reeder, Scott B

2018-04-01

To develop a fully phase-encoded MRI method for distortion-free imaging near metallic implants, in clinically feasible acquisition times. An accelerated 3D fully phase-encoded acquisition with broadband excitation and ultrashort echo times is presented, which uses a broadband radiofrequency pulse to excite the entire off-resonance induced by the metallic implant. Furthermore, fully phase-encoded imaging is used to prevent distortions caused by frequency encoding, and to obtain ultrashort echo times for rapidly decaying signal. Phantom and in vivo acquisitions were used to describe the relationship among excitation bandwidth, signal loss near metallic implants, and T 1 weighting. Shorter radiofrequency pulses captured signal closer to the implant by improving spectral coverage and allowing shorter echo times, whereas longer pulses improved T 1 weighting through larger maximum attainable flip angles. Comparisons of fully phase-encoded acquisition with broadband excitation and ultrashort echo times to T 1 -weighted multi-acquisition with variable resonance image combination selective were performed in phantoms and subjects with metallic knee and hip prostheses. These acquisitions had similar contrast and acquisition efficiency. Accelerated fully phase-encoded acquisitions with ultrashort echo times and broadband excitation can generate distortion free images near metallic implants in clinically feasible acquisition times. Magn Reson Med 79:2156-2163, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

A newly developed Fe-doped calcium sulfide nanoparticles with magnetic property for cancer hyperthermia

Science.gov (United States)

Wu, Steven Yueh-Hsiu; Tseng, Ching-Li; Lin, Feng-Huei

2010-05-01

In this study, a magnetic iron-doped calcium sulfide (Fe-CaS) nanoparticle was newly developed and studied for the purpose of hyperthermia due to its promising magnetic property, adequate biodegradation rate, and relatively good biocompatibility. Fe-CaS nanoparticles were synthesized by a wet chemical co-precipitation process with heat treatment in a N2 atmosphere, and were subsequently cooled in N2 and exposed to air at a low temperature. The crystal structure of the Fe-CaS nanoparticles was similar to that of the CaS, which was identified by an X-ray diffractometer (XRD). The particle size was less than 40 nm based on a Debye-Scherrer equation and transmission electron microscope (TEM) examination. Magnetic properties obtained from the SQUID magnetometer demonstrated that the synthesized CaS was a diamagnetic property. Once the Fe ions were doped, the synthesized Fe-CaS converted into paramagnetism which showed no hysteresis loop. Having been heated above 600 °C in N2, the Fe-CaS showed a promising magnetic property to produce enough energy to increase the temperature for hyperthermia. 10 mg/ml of the Fe-CaS was able to generate heat to elevate the media temperature over 42.5 °C within 6 min. The area of the hysteresis loop increased with the increasing of the treated temperature, especially at 800 °C for 1 h. This is because more Fe ions replaced Ca ions in the lattice at the higher heat treatment temperature. The heat production was also increasing with the increasing of heat treatment temperature, which resulted in an adequate specific absorption ratio (SAR) value, which was found to be 45.47 W/g at 37 °C under an alternative magnetic field of f = 750 KHz , H = 10 Oe. The in vitro biocompatibility test of the synthesized Fe-CaS nanoparticles examined by the LDH assay showed no cytotoxicity to 3T3 fibroblast. The result of in vitro cell hyperthermia shows that under magnetic field the Fe-CaS nanoparticles were able to generate heat and kill the CT-26 cancer

A newly developed Fe-doped calcium sulfide nanoparticles with magnetic property for cancer hyperthermia

International Nuclear Information System (INIS)

Wu, Steven Yueh-Hsiu; Tseng, Ching-Li; Lin, Feng-Huei

2010-01-01

In this study, a magnetic iron-doped calcium sulfide (Fe-CaS) nanoparticle was newly developed and studied for the purpose of hyperthermia due to its promising magnetic property, adequate biodegradation rate, and relatively good biocompatibility. Fe-CaS nanoparticles were synthesized by a wet chemical co-precipitation process with heat treatment in a N 2 atmosphere, and were subsequently cooled in N 2 and exposed to air at a low temperature. The crystal structure of the Fe-CaS nanoparticles was similar to that of the CaS, which was identified by an X-ray diffractometer (XRD). The particle size was less than 40 nm based on a Debye-Scherrer equation and transmission electron microscope (TEM) examination. Magnetic properties obtained from the SQUID magnetometer demonstrated that the synthesized CaS was a diamagnetic property. Once the Fe ions were doped, the synthesized Fe-CaS converted into paramagnetism which showed no hysteresis loop. Having been heated above 600 o C in N 2 , the Fe-CaS showed a promising magnetic property to produce enough energy to increase the temperature for hyperthermia. 10 mg/ml of the Fe-CaS was able to generate heat to elevate the media temperature over 42.5 o C within 6 min. The area of the hysteresis loop increased with the increasing of the treated temperature, especially at 800 o C for 1 h. This is because more Fe ions replaced Ca ions in the lattice at the higher heat treatment temperature. The heat production was also increasing with the increasing of heat treatment temperature, which resulted in an adequate specific absorption ratio (SAR) value, which was found to be 45.47 W/g at 37 o C under an alternative magnetic field of f = 750 KHz, H = 10 Oe. The in vitro biocompatibility test of the synthesized Fe-CaS nanoparticles examined by the LDH assay showed no cytotoxicity to 3T3 fibroblast. The result of in vitro cell hyperthermia shows that under magnetic field the Fe-CaS nanoparticles were able to generate heat and kill the CT-26

Fully plastic solutions of semi-elliptical surface cracks

International Nuclear Information System (INIS)

Yagawa, Genki; Yoshimura, Shinobu; Kitajima, Yasumi; Ueda, Hiroyoshi.

1990-01-01

Nonlinear finite element analyses of semi-elliptical surface cracks are performed under the fully plastic condition. The power-law hardening materials and the deformation theory of plasticity are assumed. Either the penalty function method or the Uzawa's algorithm is utilized to treat the incompressibility of plastic strains. The local and global J-integral values are obtained using a virtual crack extension technique for plates and cylinders with semi-elliptical surface cracks subjected to uniform tensions. The fully plastic solutions for surface cracked plates are given in the form of polynominals with geometric parameters a/t, a/c and the strain hardening exponent (n). In addition, the effects of curvature on fully plastic solutions are discussed through the comparison between the results of plates and cylinders. (author)

Evaluation of edge enhancement effect of phase contrast imaging using newly-developed photostimulable phosphor plate

International Nuclear Information System (INIS)

Matsuo, Satoru; Morishita, Junji; Katafuchi, Tetsuro; Fujita, Hiroshi

2012-01-01

We investigated whether the use of a newly developed columnar-crystal-type photostimulable-phosphor plate (CP1M200, referred to as system C) helps to provide improved edge-enhanced effect in phase contrast imaging. Physical characteristics of 2 conventional particulate-crystal-type photostimulable-phosphor plates (RP-5PM, referred to as system A and RP-6M, referred to as system B) and system C were measured. Then, an acrylic plate phantom and RMI152 phantom were imaged using 3 types of plates, and the edge-enhancement effects were evaluated based on the profile curve of the acrylic plate phantom. Visual evaluation of the RMI152 phantom images was conducted. The results showed that the modulation transfer function (MTF) of system C was superior to those of the other systems. The WS of system C was superior to those of the other systems in the low frequency band region, and inferior to those of the other systems in the high frequency band region. The presence of an edge-enhanced image was not detectable in the profile curve of the acrylic plate in system A, although that was shown in systems B and C due to their excellent sharpness. In the visual image evaluation of the RMI152 phantom, image quality of system C was superior to those of the other systems. Phase contrast imaging with a digital detector of a columnar-crystal-type photostimulable-phosphor plate is considered to provide improved edge-enhancement over that of conventional plates. (author)

Newly developed liquid-based cytology. TACAS™: cytological appearance and HPV testing using liquid-based sample.

Science.gov (United States)

Kubushiro, Kaneyuki; Taoka, Hideki; Sakurai, Nobuyuki; Yamamoto, Yasuhiro; Kurasaki, Akiko; Asakawa, Yasuyuki; Iwahara, Minoru; Takahashi, Kei

2011-09-01

Cell profiles determined by the thin-layer advanced cytology assay system (TACAS™), a liquid-based cytology technique newly developed in Japan, were analyzed in this study. Hybrid capture 2 (HC-2) was also performed using the liquid-based samples prepared by TACAS to ascertain its ability to detect human papillomavirus (HPV). Cell collection samples from uterine cervix were obtained from 359 patients and examined cytologically. A HC-2 assay for HPV was carried out in the cell specimens. All specimens were found to show background factors such as leukocytes. After excluding the 5 unsatisfactory cases from the total 354 cases, 82 cases (23.2%) were positive and 272 cases (76.8%) were negative for HPV. Cell specimens from 30 HPV-positive cases and 166 HPV-negative cases were subjected to 4 weeks of preservation at room temperature. Then, when subsequently re-assayed, 28 cases (93.3%) in the former group were found to be HPV positive and 164 cases (98.8%) in the latter group were found to be HPV negative. These results supported the excellent reproducibility of TACAS for HPV testing. A reasonable inference from the foregoing analysis is that TACAS may be distinguished from other liquid-based cytological approaches, such as ThinPrep and SurePath, in that it can retain the cell backgrounds. Furthermore, this study raises the possibility that cell specimens prepared using TACAS could be preserved for at least 4 weeks prior to carrying out a HC-2 assay for HPV.

Pollen parameters estimates of genetic variability among newly ...

African Journals Online (AJOL)

Pollen parameters estimates of genetic variability among newly selected Nigerian roselle (Hibiscus sabdariffa L.) genotypes. ... Estimates of some pollen parameters where used to assess the genetic diversity among ... HOW TO USE AJOL.

Tricks of the trade: time management tips for newly qualified doctors.

Science.gov (United States)

Offiah, Gozie; Doherty, Eva

2018-03-01

The transition from medical student to doctor is an important milestone. The discovery that their time is no longer their own and that the demands of their job are greater than the time they have available is extremely challenging. At a recent surgical boot camp training programme, 60 first-year surgical trainees who had just completed their internship were invited to reflect on the lessons learnt regarding effective time management and to recommend tips for their newly qualified colleagues. They were asked to identify clinical duties that were considered urgent and important using the time management matrix and the common time traps encountered by newly qualified doctors. The surgical trainees identified several practical tips that ranged from writing a priority list to working on relationships within the team. These tips are generic and so applicable to all newly qualified medial doctors. We hope that awareness of these tips from the outset as against learning them through experience will greatly assist newly qualified doctors. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Chest Radiographic Findings in Newly Diagnosed Pulmonary ...

African Journals Online (AJOL)

Five hundred newly diagnosed cases of Pulmonary Tuberculosis were treated with directly observed short-course treatment and 100 of them had chest radiographic examination done. The various chest radiographic patterns in the 100 subjects were studied and included: Fluffy exudative changes 80(80%), fibrosis 70(70%) ...

Analysis of the two-fluid model in fully-developed two-phase flow

International Nuclear Information System (INIS)

Azpitarte, Osvaldo Enrique

2003-01-01

The two fluid model is analysed and applied to solve vertical fully-developed bubbly two-phase flows, both in laminar and turbulent conditions.The laminar model is reduced to two differential equations to solve the gas fraction (ε G ) and the velocity (υ L ).For the turbulent condition, a k - ε model for low Reynolds number is implemented, resulting in a set of differential equations to solve the four variables (ε G , υ L , k and ε) along the whole radial domain (including the laminar sub layer).For laminar condition, the system is initially reduced to a single non-dimensional ordinary equation (O D E) to solve ε G in the central region of the duct, without considering the effect of the wall.The equation is solved using Mathematic a.Analysing the solutions it can be concluded that an exact compensation of the applied pressure gradient with the hydrostatic force ρ e ff g occurs (ρ e ff : effective density of the mixture).This compensation implies that the value of ε G at the center of the duct only depends on the applied pressure gradient (dependency is linear), and that the ε G and υ L profiles are necessarily fl ato The complete problem is dealt numerically through the implementation of a finite element co deo The effect of the walls is included via a model of wall force.When the code is applied to a laminar condition, the conclusions previously obtained solving the O D E are confirmed.It is also possible to analyse the regime in which the pressure gradient is greater than the weight of the pure liquid, in which case a region of strictly zero void fraction develops surrounding the axis of the duct (in upward flow).When the code is applied to a turbulent condition, it is shown that the conclusions obtained for laminar condition can also be applied, but within a range of pressure gradient limited by two transition values (θ 1 and θ 2 ).An analysis of transitions θ 1 and θ 2 allows u s to conclude that their origin is a sudden increase of lateral

AREVA main steam line break fully coupled methodology based on CATHARE-ARTEMIS - 15496

International Nuclear Information System (INIS)

Denis, L.; Jasserand, L.; Tomatis, D.; Segond, M.; Royere, C.; Sauvage, J.Y.

2015-01-01

The CATHARE code developed since 1979 by AREVA, CEA, EDF and IRSN is one of the major thermal-hydraulic system codes worldwide. In order to have at disposal realistic methodologies based on CATHARE for the whole transient and accident analysis in Chapter 15 of Safety Reports, a coupling with the code ARTEMIS was developed. ARTEMIS is the core code in AREVA's new reactor simulator system ARCADIA, using COBRA-FLX to model the thermal-hydraulics in the core. The Fully Coupled Methodology was adapted to the CATHARE-ARTEMIS coupling to perform Main Steam Line Break studies. This methodology, originally applied to the MANTA-SMART-FLICA coupling, is dedicated to Main Steam Line Break transients at zero power. The aim of this paper is to present the coupling between CATHARE and ARTEMIS and the application of the Fully Coupled Methodology in a different code environment. (authors)

Validating self-reported mobile phone use in adults using a newly developed smartphone application.

Science.gov (United States)

Goedhart, Geertje; Kromhout, Hans; Wiart, Joe; Vermeulen, Roel

2015-11-01

Interpretation of epidemiological studies on health effects from mobile phone use is hindered by uncertainties in the exposure assessment. We used a newly developed smartphone application (app) to validate self-reported mobile phone use and behaviour among adults. 107 participants (mean age 41.4 years) in the Netherlands either downloaded the software app on their smartphone or were provided with a study smartphone for 4 weeks. The app recorded the number and duration of calls, text messages, data transfer, laterality and hands-free use. Self-reported mobile phone use was collected before using the app and after 6 months through an interviewer-administered questionnaire. The geometric mean ratios (GMR, 95% CI) and Spearman correlations (r) of self-reported (after 6 months) versus recorded number and duration of calls were: GMR=0.65 (0.53 to 0.80), r=0.53; and GMR=1.11 (0.86 to 1.42), r=0.57 respectively. Participants held the phone on average for 86% of the total call time near the head. Self-reported right side users held the phone for 70.7% of the total call time on the right side of the head, and left side users for 66.2% on the left side of the head. The percentage of total call time that the use of hands-free devices (headset, speaker mode, Bluetooth) was recorded increased with increasing frequency of reported hands-free device usage. The observed recall errors and precision of reported laterality and hands-free use can be used to quantify and improve radiofrequency exposure models based on self-reported mobile phone use. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Application of the newly developed Japanese adenosine normal database for adenosine stress myocardial scintigraphy.

Science.gov (United States)

Harata, Shingo; Isobe, Satoshi; Morishima, Itsuro; Suzuki, Susumu; Tsuboi, Hideyuki; Sone, Takahito; Ishii, Hideki; Murohara, Toyoaki

2015-10-01

The currently available Japanese normal database (NDB) in stress myocardial perfusion scintigraphy recommended by the Japanese Society of Nuclear Medicine (JSNM-NDB) is created based on the data from exercise tests. The newly developed adenosine normal database (ADS-NDB) remains to be validated for patients undergoing adenosine stress test. We tested whether the diagnostic accuracy of adenosine stress test is improved by the use of ADS-NDB (Kanazawa University). Of 233 consecutive patients undergoing (99m)Tc-MIBI adenosine stress test, 112 patients were tested. The stress/rest myocardial (99m)Tc-MIBI single-photon emission computed tomography (SPECT) images were analyzed by AutoQUANT 7.2 with both ADS-NDB and JSNM-NDB. The summed stress score (SSS) and summed difference score (SDS) were calculated. The agreements of the post-stress defect severity between ADS-NDB and JSNM-NDB were assessed using a weighted kappa statistic. In all patients, mean SSSs of all, right coronary artery (RCA), left anterior descending (LAD), and left circumflex (LCx) territories were significantly lower with ADS-NDB than those with JSNM-NDB. Mean SDSs in all, RCA, and LAD territories were significantly lower with ADS-NDB than those with JSNM-NDB. In 28 patients with significant coronary stenosis, the mean SSS in the RCA territory was significantly lower with ADS-NDB than that with JSNM-NDB. In 84 patients without ischemia, both mean SSSs and SDSs in all, RCA, LAD, and LCx territories were significantly lower with ADS-NDB than those with JSNM-NDB. Weighted kappa values of all patients, patients with significant stenosis, and patients without ischemia were 0.89, 0.83, and 0.92, respectively. Differences were observed between results from ADS-NDB and JSNM-NDB. The diagnostic accuracy of adenosine stress myocardial perfusion scintigraphy may be improved by reducing false-positive results.

CMOS current controlled fully balanced current conveyor

International Nuclear Information System (INIS)

Wang Chunhua; Zhang Qiujing; Liu Haiguang

2009-01-01

This paper presents a current controlled fully balanced second-generation current conveyor circuit (CF-BCCII). The proposed circuit has the traits of fully balanced architecture, and its X-Y terminals are current controllable. Based on the CFBCCII, two biquadratic universal filters are also proposed as its applications. The CFBCCII circuits and the two filters were fabricated with chartered 0.35-μm CMOS technology; with ±1.65 V power supply voltage, the total power consumption of the CFBCCII circuit is 3.6 mW. Comparisons between measured and HSpice simulation results are also given.

Preparation and Evaluation of Newly Developed Chitosan Salt Coating Dispersions for Colon Delivery without Requiring Overcoating.

Science.gov (United States)

Yamada, Kyohei; Iwao, Yasunori; Bani-Jaber, Ahmad; Noguchi, Shuji; Itai, Shigeru

2015-01-01

Although chitosan (CS) has been recognized as a good material for colon-specific drug delivery systems, an overcoating with an enteric coating polymer on the surface of CS is absolutely necessary because CS is soluble in acidic conditions before reaching the colon. In the present study, to improve its stability in the presence of acid, a newly developed CS-laurate (CS-LA) material was evaluated as a coating dispersion for the development of colon-specific drug delivery systems. Two types of CS with different molecular weights, CS250 and CS600, were used to prepare CS-LA films by the casting method. The CS250-LA films had smooth surfaces, whereas the surfaces of the CS600-LA films were rough, indicating that the CS250-LA dispersion could form a denser film than CS600-LA. Both of these CS-LA films maintained a constant shape over 22 h in a pH 1.2 HCl/NaCl buffer, where the corresponding CS films rapidly disintegrated. In addition, the CS250-LA film showed specific colon degradability in a pH 6.0 phosphate buffered solution containing 1.0% (w/v) β-glucosidase. As a result of tensile strength and elongation at the break, both CS-LA films were found to have flexible film properties. Finally, the release of acetaminophen from disks coated with CS250-LA dispersions was significantly suppressed in fluids at pH 1.2 and 6.8, whereas disks coated with CS solution rapidly released the drug in pH 1.2 fluids. Taken together, this study shows that LA modification could be a useful approach in preparing CS films with acid stability and colonic degradability properties without requiring overcoating.

Fully Adaptive Radar Modeling and Simulation Development

Science.gov (United States)

2017-04-01

using an object oriented programming (OOP) approach. It includes a FAR engine to control the operation of the perception-action (PA) cycle and...is unlimited 41 NATO North Atlantic Treaty Organization OOP object oriented programming OSU The Ohio State University PA perception-action PDF...development and testing on simulated, previously collected, and real-time streaming data. The architecture is coded in MATLAB using an object oriented

Fully automatic AI-based leak detection system

Energy Technology Data Exchange (ETDEWEB)

Tylman, Wojciech; Kolczynski, Jakub [Dept. of Microelectronics and Computer Science, Technical University of Lodz in Poland, ul. Wolczanska 221/223, Lodz (Poland); Anders, George J. [Kinectrics Inc., 800 Kipling Ave., Toronto, Ontario M8Z 6C4 (Canada)

2010-09-15

This paper presents a fully automatic system intended to detect leaks of dielectric fluid in underground high-pressure, fluid-filled (HPFF) cables. The system combines a number of artificial intelligence (AI) and data processing techniques to achieve high detection capabilities for various rates of leaks, including leaks as small as 15 l per hour. The system achieves this level of precision mainly thanks to a novel auto-tuning procedure, enabling learning of the Bayesian network - the decision-making component of the system - using simulated leaks of various rates. Significant new developments extending the capabilities of the original leak detection system described in and form the basis of this paper. Tests conducted on the real-life HPFF cable system in New York City are also discussed. (author)

First tests with fully depleted PN-CCD's

International Nuclear Information System (INIS)

Strueder, L.; Lutz, G.; Sterzik, M.; Holl, P.; Kemmer, J.; Prechtel, U.; Ziemann, T.; Rehak, P.

1987-01-01

We have fabricated 280 μm thick fully depletable pn CCD's on high resistivity silicon (/rho/ ∼ 2.5 kΩcm). Its operation is based on the semiconductor drift chamber principle proposed by Gatti and Rheak. They are designed as energy and position sensitive radiation detector for (minimum) ionizing particles and X-ray imaging. Two dimensional semiconductor device modeling demonstrates the basic charge transer mechanisms. Prototypes of the detectors have been tested in static and dynamic conditions. A preliminary charge transfer inefficiency was determined to 6 x 10/sup/minus/3/. The charge loss during the transfer is discussed and as a consequence we have developed an improved design for a second fabrication iteration which is now being produced. 4 refs., 15 figs

A Concept Analysis of Fully Informed: Breastfeeding Promotion

Science.gov (United States)

2005-12-21

updated breastfeeding policy statement, the American Academy of Pediatrics 3 ( AAP , 2005) identified the compelling advantages of breastfeeding and urged...healthcare 4 professionals to implement principles to promote breastfeeding . The AAP cited obstacles 5 to the initiation and continuation of...Analysis of Fully Informed 2 14 A Concept Analysis of Fully Informed: Breastfeeding Promotion 15 In February 2005, the American Academy of Pediatrics ( AAP

Two Newly Discovered Plants in Taiwan

Directory of Open Access Journals (Sweden)

Tian-Chuan Hsu

2009-11-01

Full Text Available Two herbs are newly discovered in Taiwan. Limnophila fragrans (G. Forst. Seem. (Scrophulariaceae, native in SE Asia, is recognized from southern lowlands. Anagallis minima (L. E. H. L. Krause (Primulaceae, native in N America and Europe, was found from northern mountainous region at low altitudes. In this study, descriptions, line drawings, color photos and a distribution map of the two species are provided.

Fully Employing Software Inspections Data

Science.gov (United States)

Shull, Forrest; Feldmann, Raimund L.; Seaman, Carolyn; Regardie, Myrna; Godfrey, Sally

2009-01-01

Software inspections provide a proven approach to quality assurance for software products of all kinds, including requirements, design, code, test plans, among others. Common to all inspections is the aim of finding and fixing defects as early as possible, and thereby providing cost savings by minimizing the amount of rework necessary later in the lifecycle. Measurement data, such as the number and type of found defects and the effort spent by the inspection team, provide not only direct feedback about the software product to the project team but are also valuable for process improvement activities. In this paper, we discuss NASA's use of software inspections and the rich set of data that has resulted. In particular, we present results from analysis of inspection data that illustrate the benefits of fully utilizing that data for process improvement at several levels. Examining such data across multiple inspections or projects allows team members to monitor and trigger cross project improvements. Such improvements may focus on the software development processes of the whole organization as well as improvements to the applied inspection process itself.

Diabetes education and self-management for ongoing and newly diagnosed (DESMOND)

DEFF Research Database (Denmark)

Skinner, T. Chas; Carey, Marian E.; Cradock, Sue

2006-01-01

diagnosed with Type 2 diabetes changes key illness beliefs and that these changes predict quality of life and metabolic control at 3-month follow-up. Practice implications: Newly diagnosed individuals are open to attending self-management programs and, if the program is theoretically driven, can......Objective: To determine the effects of a structured education program on illness beliefs, quality of life and physical activity in people newly diagnosed with Type 2 diabetes. Methods: Individuals attending a diabetes education and self-management for ongoing and newly diagnosed (DESMOND) program...... in 12 Primary Care Trusts completed questionnaire booklets assessing illness beliefs and quality of life at baseline and 3-month follow-up, metabolic control being assessed through assay of HbA1c. Results: Two hundred and thirty-six individuals attended the structured self-management education sessions...

Fully wireless pressure sensor based on endoscopy images

Science.gov (United States)

Maeda, Yusaku; Mori, Hirohito; Nakagawa, Tomoaki; Takao, Hidekuni

2018-04-01

In this paper, the result of developing a fully wireless pressure sensor based on endoscopy images for an endoscopic surgery is reported for the first time. The sensor device has structural color with a nm-scale narrow gap, and the gap is changed by air pressure. The structural color of the sensor is acquired from camera images. Pressure detection can be realized with existing endoscope configurations only. The inner air pressure of the human body should be measured under flexible-endoscope operation using the sensor. Air pressure monitoring, has two important purposes. The first is to quantitatively measure tumor size under a constant air pressure for treatment selection. The second purpose is to prevent the endangerment of a patient due to over transmission of air. The developed sensor was evaluated, and the detection principle based on only endoscopy images has been successfully demonstrated.

Nuclear material accounting and control: Co-ordinating assistance to newly independent States

International Nuclear Information System (INIS)

Thorstensen, S.

1995-01-01

This article outlines work under way among the IAEA, its Member States, and the Newly Independent States (NIS) relating to the establishment and development in the NIS of State Systems of Accounting and Control (SSACs) of nuclear material. It describes IAEA activities in the NIS, including fact-finding missions at technical visits, the successful attempts to find donor States providing voluntary funding and expertise, and the co-ordination of technical support between the IAEA and the donor States. 3 tabs

Profiles of alpha-melanocyte-stimulating hormone in the Japanese flounder as revealed by a newly developed time-resolved fluoroimmunoassay and immunohistochemistry.

Science.gov (United States)

Amiya, Noriko; Amano, Masafumi; Takahashi, Akiyoshi; Yamanome, Takeshi; Yamamori, Kunio

2007-03-01

Profiles of alpha-melanocyte-stimulating hormone (alpha-MSH) in the Japanese flounder were examined by a newly developed time-resolved fluoroimmunoassay (TR-FIA) and immunohistochemistry. A TR-FIA for alpha-MSH was newly developed, and its levels in the pituitary gland and plasma of Japanese flounder reared in a white or black tank for 5 months were compared. A competitive assay using two antibodies was performed among secondary antibodies in the solid phase, alpha-MSH antibodies, samples, and europium-labeled Des-Ac-alpha-MSH. The sensitivity of the assay, defined as twice the standard deviation at a zero dose, was 0.98 ng/ml (49 pg/well). The intra- and interassay coefficients of variation of the assay were 8.8% (n=8) and 17.3% (n=5), respectively, at about 50% binding. Cross-reactivities of Des-Ac-alpha-MSH and Di-Ac-alpha-MSH were about 100%. Cross-reactivities of adrenocorticotropic hormone, salmon gonadotropin-releasing hormone (sGnRH), and chicken GnRH-II were less than 0.2%, and that of melanin-concentrating hormone was less than 2.0% at 50% binding. Displacement curves of serially twofold-diluted hypothalamus extract, pituitary gland extract, and plasma extract of Japanese flounder with the assay buffer were parallel to the alpha-MSH standard curve. Moreover, displacement curves of serially twofold-diluted hypothalamus and/or pituitary gland extract of masu salmon, goldfish, red seabream, Japanese eel, tiger puffer, and barfin flounder with the assay buffer were also parallel to the alpha-MSH standard. In Japanese flounder, total immunoreactive (ir)-alpha-MSH levels in the pituitary gland were lower in the black tank, whereas those in the plasma tended to be higher in the black tank, suggesting that the synthesis and release of alpha-MSH are higher in the black tank. alpha-MSH-ir cells were detected in the pars intermedia and a small part of the pars distalis of the pituitary gland. alpha-MSH-ir cell bodies were located in the basal hypothalamus and alpha

'Practising under your own Pin'- a description of the transition experiences of newly qualified midwives.

Science.gov (United States)

Avis, Mark; Mallik, Maggie; Fraser, Diane M

2013-11-01

Transition experiences of newly qualified midwives were examined in depth during the third phase of a UK evaluation study of midwifery education. The fitness to practise and the retention of newly qualified nursing and midwifery graduates are pressing concerns for health care managers. The advantages of preceptorship are reported in the literature but the content and timing of schemes remain unclear. A semi-structured diary was kept for up to 6 months by 35 newly qualified midwives in 18 work sites covering all countries in the UK. The preceptor and supervisor of midwives for each newly qualified midwife completed short questionnaires about their preceptee's performance, and a further sub-sample of newly qualified midwives and preceptors participated in a semi-structured interview. Data were analysed to elicit aspects of newly qualified midwives transition experiences. Findings confirm that structured preceptorship schemes are not widely available. Newly qualified midwives primarily obtained transition support from members of the midwifery team. Although perceived as competent, there is no demarcation point in becoming confident to practise as a registered practitioner. Implications for managers include the importance of a supportive culture within clinical teams for successful transition and the introduction of structured preceptorship schemes facilitated by appropriate rotation patterns. © 2012 John Wiley & Sons Ltd.

Induction of transplantation tolerance to fully mismatched cardiac allografts by T cell mediated delivery of alloantigen

Science.gov (United States)

Tian, Chaorui; Yuan, Xueli; Jindra, Peter T.; Bagley, Jessamyn; Sayegh, Mohamed H.; Iacomini, John

2010-01-01

Induction of transplantation tolerance has the potential to allow for allograft acceptance without the need for life-long immunosuppression. Here we describe a novel approach that uses delivery of alloantigen by mature T cells to induce tolerance to fully allogeneic cardiac grafts. Adoptive transfer of mature alloantigen-expressing T cells into myeloablatively conditioned mice results in long-term acceptance of fully allogeneic heart transplants without evidence of chronic rejection. Since myeloablative conditioning is clinically undesirable we further demonstrated that adoptive transfer of mature alloantigen-expressing T cells alone into mice receiving non-myeloablative conditioning resulted in long-term acceptance of fully allogeneic heart allografts with minimal evidence of chronic rejection. Mechanistically, tolerance induction involved both deletion of donor-reactive host T cells and the development of regulatory T cells. Thus, delivery of alloantigen by mature T cells induces tolerance to fully allogeneic organ allografts in non-myeloablatively conditioned recipients, representing a novel approach for tolerance induction in transplantation. PMID:20452826

Music-based Autism Diagnostics (MUSAD) - A newly developed diagnostic measure for adults with intellectual developmental disabilities suspected of autism.

Science.gov (United States)

Bergmann, Thomas; Sappok, Tanja; Diefenbacher, Albert; Dames, Sibylle; Heinrich, Manuel; Ziegler, Matthias; Dziobek, Isabel

2015-01-01

The MUSAD was developed as a diagnostic observational instrument in an interactional music framework. It is based on the ICD-10/DSM-5 criteria for autism spectrum disorder (ASD) and was designed to assess adults on a lower level of functioning, including individuals with severe language impairments. This study aimed to evaluate the psychometric properties of the newly developed instrument. Calculations were based on a consecutive clinical sample of N=76 adults with intellectual and developmental disabilities (IDD) suspected of ASD. Objectivity, test-retest reliability, and construct validity were calculated and a confirmatory factor analysis was applied to verify a reduced and optimized test version. The structural model showed a good fit, while internal consistency of the subscales was excellent (ω>.92). Item difficulties ranged between .04≤pi≤.82 and item-total correlation from .21 to .85. Objectivity was assessed by comparing the scorings of two external raters based on a subsample of n=12; interrater agreement was .71 (ICC 2, 1). Reliability was calculated for four test repetitions: the average ICC (3, 1) was .69. Convergent ASD measures correlated significantly with the MUSAD, while the discriminant Modified Overt Aggression Scale (MOAS) showed no significant overlap. Confirmation of factorial structure and acceptable psychometric properties suggest that the MUSAD is a promising new instrument for diagnosing ASD in adults with IDD. Copyright © 2015 Elsevier Ltd. All rights reserved.

The use of EORTC measures in daily clinical practice-A synopsis of a newly developed manual.

Science.gov (United States)

Wintner, Lisa M; Sztankay, Monika; Aaronson, Neil; Bottomley, Andrew; Giesinger, Johannes M; Groenvold, Mogens; Petersen, Morten Aa; van de Poll-Franse, Lonneke; Velikova, Galina; Verdonck-de Leeuw, Irma; Holzner, Bernhard

2016-11-01

Cancer has increasingly become a chronic condition and the routine collection of patient-reported outcomes (PROs) like quality of life is widely recommended for clinical practice. Nonetheless, the successful implementation of PROs is still a major challenge, although common barriers to and facilitators of their beneficial use are well known. To support health care professionals and other stakeholders in the implementation of the EORTC PRO measures, the EORTC Quality of Life Group provides guidance on issues considered important for their use in daily clinical practice. Herein, we present an outline of the newly developed "'Manual for the use of EORTC measures in daily clinical practice", covering the following issues: * a rationale for using EORTC measures in routine care *selection of EORTC measures, timing of assessments, scoring and presentation of results * aspects of a strategic implementation * electronic data assessment and telemonitoring, and * further use of EORTC measures and ethical considerations. Next to an extensive overview of currently available literature, the manual specifically focuses on knowledge about EORTC measures to give evidence-based recommendations whenever possible and to encourage readers and end-users of EORTC measures to contribute to further needed high-quality research. The manual will be accessible on the EORTC Quality of Life Group website's homepage and will be periodically updated to take into account any new knowledge due to medical, technical, regulatory and scientific advances. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Fully exponentially correlated wavefunctions for small atoms

Energy Technology Data Exchange (ETDEWEB)

Harris, Frank E. [Department of Physics, University of Utah, Salt Lake City, UT 84112 and Quantum Theory Project, University of Florida, P.O. Box 118435, Gainesville, FL 32611 (United States)

2015-01-22

Fully exponentially correlated atomic wavefunctions are constructed from exponentials in all the interparticle coordinates, in contrast to correlated wavefunctions of the Hylleraas form, in which only the electron-nuclear distances occur exponentially, with electron-electron distances entering only as integer powers. The full exponential correlation causes many-configuration wavefunctions to converge with expansion length more rapidly than either orbital formulations or correlated wavefunctions of the Hylleraas type. The present contribution surveys the effectiveness of fully exponentially correlated functions for the three-body system (the He isoelectronic series) and reports their application to a four-body system (the Li atom)

Fully interferometric controllable anomalous refraction efficiency using cross modulation with plasmonic metasurfaces.

Science.gov (United States)

Liu, Zhaocheng; Chen, Shuqi; Li, Jianxiong; Cheng, Hua; Li, Zhancheng; Liu, Wenwei; Yu, Ping; Xia, Ji; Tian, Jianguo

2014-12-01

We present a method of fully interferometric, controllable anomalous refraction efficiency by introducing cross-modulated incident light based on plasmonic metasurfaces. Theoretical analyses and numerical simulations indicate that the anomalous and ordinary refracted beams generated from two opposite-helicity incident beams and following the generalized Snell's law will have a superposition for certain incident angles, and the anomalous refraction efficiency can be dynamically controlled by changing the relative phase of the incident sources. As the incident wavelength nears the resonant wavelength of the plasmonic metasurfaces, two equal-amplitude incident beams with opposite helicity can be used to control the anomalous refraction efficiency. Otherwise, two unequal-amplitude incident beams with opposite helicity can be used to fully control the anomalous refraction efficiency. This Letter may offer a further step in the development of controllable anomalous refraction.

Yield and Adaptability Evaluation of Newly Introduced Tomato ...

African Journals Online (AJOL)

High yield is a major ambition to tomato plant breeders and farmers. The purpose of the ... Tabora Region on the growth and yield of newly introduced tomato varieties. The tested ..... (1985). Evaluation of some American tomatocultivars grown.

Newly elected IAEA Board of Governors

International Nuclear Information System (INIS)

2000-01-01

The document gives information about the election of 11 Member States to the IAEA Board of Governors, the 35-member policy-making body, during the 44th regular session of the IAEA's General Conference (18 - 22 September 2000, Austria Center, Vienna). The newly elected Member States are: Argentina, Egypt, Ghana, Ireland, Libyan Arab Jamahiriya, Mexico, Pakistan, Peru, Switzerland, Thailand, Ukraine. The other 24 Member States of the Board are also given

Circulating mesencephalic astrocyte-derived neurotrophic factor is increased in newly diagnosed prediabetic and diabetic patients, and is associated with insulin resistance.

Science.gov (United States)

Wu, Tong; Zhang, Fang; Yang, Qiu; Zhang, Yuwei; Liu, Qinhui; Jiang, Wei; Cao, Hongyi; Li, Daigang; Xie, Shugui; Tong, Nanwei; He, Jinhan

2017-04-29

Evidence has shown that endoplasmic reticulum (ER) stress was involved in the progression to type 2 diabetes mellitus (T2DM) and development of insulin resistance. Mesencephalic astrocyte-derived neurotrophic factor (MANF) is a novel secreted protein upregulated by ER stress. This study aimed to assess serum level of MANF in normal glucose tolerance (NGT) participants and newly diagnosed prediabetic and T2DM patients. A total of 257 participants with NGT, newly diagnosed prediabetes or T2DM were recruited from Yinchao and Hangtian communities of Chengdu, Sichuan, China. Serum MANF level was quantified by enzyme-linked immunosorbent assay (ELISA). The mean age for the 257 participants (147 females) was 62±8 years (range 44-78): 71 with NGT, 115 with newly diagnosed prediabetes and 71 with T2DM. Mean serum MANF level was significantly higher with newly diagnosed prediabetes and T2DM than NGT (2.89±1.09 and 3.03±1.73 vs 2.13±1.37 ng/mL, both pprediabetes patients. We concluded that serum MANF level was higher in patients with newly diagnosed prediabetes and T2DM than in NGT controls. MANF appears to be associated with Matsuda Index, QUICKI and HOMA-IR in prediabetes patients.

Localization of foot-and-mouth disease - RNA synthesis on newly formed cellular smooth membranous vacuoles

International Nuclear Information System (INIS)

Polatnick, J.; Wool, S.H.

1982-01-01

Viral RNA synthesis in foot-and-mouth disease infected bovine kidney cell cultures was associated throughout the infectious period with newly formed smooth membranous vacuoles. Membrane formation was measured by choline uptake. The site of RNA synthesis was determined by electron microscopic examination of autoradiograms of incorporated [ 3 H] uridine. Both membrane formation and RNA synthesis became signifcant at 2.5 hours postinfection, but membrane formation increased steadily to 4.5 hours while RNA synthesis peaked at 3.5 hours. Percent density distributions of developed silver grains on autoradiograms showed that almost all RNA synthesis was concentrated on the smooth vacuoles of infected cells. Histogram analysis of grain density distributions established that the site of RNA synthesis was the vacuolar membrane. The newly formed smooth membrane-bound vacuoles were not seen to coalesce into the large vacuolated areas typical of poliovirus cytopathogenicity. (Author)

Localization of foot-and-mouth disease - RNA synthesis on newly formed cellular smooth membranous vacuoles

Energy Technology Data Exchange (ETDEWEB)

Polatnick, J.; Wool, S.H. (United States Department of Agriculture, Science and Education, Greenport, New York (USA). Agricultural Research, Plum Island Animal Disease Center)

1982-01-01

Viral RNA synthesis in foot-and-mouth disease infected bovine kidney cell cultures was associated throughout the infectious period with newly formed smooth membranous vacuoles. Membrane formation was measured by choline uptake. The site of RNA synthesis was determined by electron microscopic examination of autoradiograms of incorporated (/sup 3/H) uridine. Both membrane formation and RNA synthesis became signifcant at 2.5 hours postinfection, but membrane formation increased steadily to 4.5 hours while RNA synthesis peaked at 3.5 hours. Percent density distributions of developed silver grains on autoradiograms showed that almost all RNA synthesis was concentrated on the smooth vacuoles of infected cells. Histogram analysis of grain density distributions established that the site of RNA synthesis was the vacuolar membrane. The newly formed smooth membrane-bound vacuoles were not seen to coalesce into the large vacuolated areas typical of poliovirus cytopathogenicity.

Fully-distributed randomized cooperation in wireless sensor networks

KAUST Repository

Bader, Ahmed

2015-01-07

When marrying randomized distributed space-time coding (RDSTC) to geographical routing, new performance horizons can be created. In order to reach those horizons however, routing protocols must evolve to operate in a fully distributed fashion. In this letter, we expose a technique to construct a fully distributed geographical routing scheme in conjunction with RDSTC. We then demonstrate the performance gains of this novel scheme by comparing it to one of the prominent classical schemes.

Fully-distributed randomized cooperation in wireless sensor networks

KAUST Repository

Bader, Ahmed; Abed-Meraim, Karim; Alouini, Mohamed-Slim

2015-01-01

When marrying randomized distributed space-time coding (RDSTC) to geographical routing, new performance horizons can be created. In order to reach those horizons however, routing protocols must evolve to operate in a fully distributed fashion. In this letter, we expose a technique to construct a fully distributed geographical routing scheme in conjunction with RDSTC. We then demonstrate the performance gains of this novel scheme by comparing it to one of the prominent classical schemes.

Clinical evaluation of a newly designed orthodontic tooth brush - A clinical study

Directory of Open Access Journals (Sweden)

C S Saimbi

2009-01-01

In this study, the newly designed orthodontic tooth brush is compared with an ordinary tooth brush. Results of this study show that the newly designed orthodontic tooth brush is superior in its cleaning efficiency as compared to the ordinary tooth brush. The results show that plaque removing capacity of orthodontic tooth brush is nearly 95-99%.

Clinical Evaluation of a Fully-automatic Segmentation Method for Longitudinal Brain Tumor Volumetry

Science.gov (United States)

Meier, Raphael; Knecht, Urspeter; Loosli, Tina; Bauer, Stefan; Slotboom, Johannes; Wiest, Roland; Reyes, Mauricio

2016-03-01

Information about the size of a tumor and its temporal evolution is needed for diagnosis as well as treatment of brain tumor patients. The aim of the study was to investigate the potential of a fully-automatic segmentation method, called BraTumIA, for longitudinal brain tumor volumetry by comparing the automatically estimated volumes with ground truth data acquired via manual segmentation. Longitudinal Magnetic Resonance (MR) Imaging data of 14 patients with newly diagnosed glioblastoma encompassing 64 MR acquisitions, ranging from preoperative up to 12 month follow-up images, was analysed. Manual segmentation was performed by two human raters. Strong correlations (R = 0.83-0.96, p < 0.001) were observed between volumetric estimates of BraTumIA and of each of the human raters for the contrast-enhancing (CET) and non-enhancing T2-hyperintense tumor compartments (NCE-T2). A quantitative analysis of the inter-rater disagreement showed that the disagreement between BraTumIA and each of the human raters was comparable to the disagreement between the human raters. In summary, BraTumIA generated volumetric trend curves of contrast-enhancing and non-enhancing T2-hyperintense tumor compartments comparable to estimates of human raters. These findings suggest the potential of automated longitudinal tumor segmentation to substitute manual volumetric follow-up of contrast-enhancing and non-enhancing T2-hyperintense tumor compartments.

The Qatar National Historic Environment Record: a Platform for the Development of a Fully-Integrated Cultural Heritage Management Application

Science.gov (United States)

Cuttler, R. T. H.; Tonner, T. W. W.; Al-Naimi, F. A.; Dingwall, L. M.; Al-Hemaidi, N.

2013-07-01

The development of the Qatar National Historic Environment Record (QNHER) by the Qatar Museums Authority and the University of Birmingham in 2008 was based on a customised, bilingual Access database and ArcGIS. While both platforms are stable and well supported, neither was designed for the documentation and retrieval of cultural heritage data. As a result it was decided to develop a custom application using Open Source code. The core module of this application is now completed and is orientated towards the storage and retrieval of geospatial heritage data for the curation of heritage assets. Based on MIDAS Heritage data standards and regionally relevant thesauri, it is a truly bilingual system. Significant attention has been paid to the user interface, which is userfriendly and intuitive. Based on a suite of web services and accessed through a web browser, the system makes full use of internet resources such as Google Maps and Bing Maps. The application avoids long term vendor ''tie-ins'' and as a fully integrated data management system, is now an important tool for both cultural resource managers and heritage researchers in Qatar.

Tackling the challenges of fully immersive head-mounted AR devices

Science.gov (United States)

Singer, Wolfgang; Hillenbrand, Matthias; Münz, Holger

2017-11-01

The optical requirements of fully immersive head mounted AR devices are inherently determined by the human visual system. The etendue of the visual system is large. As a consequence, the requirements for fully immersive head-mounted AR devices exceeds almost any high end optical system. Two promising solutions to achieve the large etendue and their challenges are discussed. Head-mounted augmented reality devices have been developed for decades - mostly for application within aircrafts and in combination with a heavy and bulky helmet. The established head-up displays for applications within automotive vehicles typically utilize similar techniques. Recently, there is the vision of eyeglasses with included augmentation, offering a large field of view, and being unobtrusively all-day wearable. There seems to be no simple solution to reach the functional performance requirements. Known technical solutions paths seem to be a dead-end, and some seem to offer promising perspectives, however with severe limitations. As an alternative, unobtrusively all-day wearable devices with a significantly smaller field of view are already possible.

Diabetes education improves depressive state in newly diagnosed patients with type 2 diabetes

OpenAIRE

Chen, Bin; Zhang, Xiyao; Xu, Xiuping; Lv, Xiaofeng; Yao, Lu; Huang, Xu; Guo, Xueying; Liu, Baozhu; Li, Qiang; Cui, Can

2013-01-01

Objectives: The prevalence of depression is relatively high in individuals with diabetes. However, screening and monitoring of depressive state in patients with diabetes is still neglected in developing countries and the treatment of diabetes-related depression is rarely performed in these countries. In this study, our aim was to study the role of diabetes education in the improvement of depressive state in newly diagnosed patients with type 2 diabetes. Methods: The Dutch version of the cente...

Newly elected IAEA Board of Governors

International Nuclear Information System (INIS)

2001-01-01

The document gives information about the election of 11 Member States to the IAEA Board of Governors, the 35-member policy-making body, during the 45th regular session of the IAEA's General Conference (17-21 September 2001, Austria Center, Vienna). The newly elected Member States are: Bulgaria, Burkina Faso, Chile, Colombia, Islamic Republic of Iran, Kuwait, Morocco, Philippines, Romania, Spain, and Turkey. The other 24 Member States of the Board are also given

Lunar Navigator - A Miniature, Fully Autonomous, Lunar Navigation, Surveyor, and Range Finder System, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Microcosm proposes to design and develop a fully autonomous Lunar Navigator based on our MicroMak miniature star sensor and a gravity gradiometer similar to one on a...

Health problems of newly arrived migrants and refugees in Europe.

Science.gov (United States)

Pavli, Androula; Maltezou, Helena

2017-07-01

The number of migrants and refugees in Europe in the past few years has increased dramatically due to war, violence or prosecutions in their homeland. Migration may affect physical, mental and social health. The objective of this article is to assess migrants and refugees' health problems, and to recommend appropriate interventions. A PubMed search of published articles on health problems of newly arrived migrants and refugees was conducted from 2003 through 2016, focusing on the current refugee crisis in Europe. In addition to communicable diseases, such as respiratory, gastrointestinal and dermatologic infections, non-communicable diseases, including chronic conditions, mental and social problems, account for a significant morbidity burden in newly arrived migrants and refugees. Vaccine-preventable diseases are also of outmost importance. The appropriate management of newly arrived refugees and migrants' health problems is affected by barriers to access to health care including legal, communication, cultural and bureaucratic difficulties. There is diversity and lack of integration regarding health care provision across Europe due to policy differences between health care systems and social services. There is a notable burden of communicable and non-communicable diseases among newly arrived migrants and refugees. Provision of health care at reception and temporary centres should be integrated and provided by a multidisciplinary team Appropriate health care of migrants and refugees could greatly enhance their health and social status which will benefit also the host countries at large. © International Society of Travel Medicine, 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Solving Fully Fuzzy Linear System of Equations in General Form

Directory of Open Access Journals (Sweden)

A. Yousefzadeh

2012-06-01

Full Text Available In this work, we propose an approach for computing the positive solution of a fully fuzzy linear system where the coefficient matrix is a fuzzy $nimes n$ matrix. To do this, we use arithmetic operations on fuzzy numbers that introduced by Kaffman in and convert the fully fuzzy linear system into two $nimes n$ and $2nimes 2n$ crisp linear systems. If the solutions of these linear systems don't satisfy in positive fuzzy solution condition, we introduce the constrained least squares problem to obtain optimal fuzzy vector solution by applying the ranking function in given fully fuzzy linear system. Using our proposed method, the fully fuzzy linear system of equations always has a solution. Finally, we illustrate the efficiency of proposed method by solving some numerical examples.

Fully developed liquid-metal flow in multiple rectangular ducts in a strong uniform magnetic field

International Nuclear Information System (INIS)

Molokov, S.

1993-01-01

Fully developed liquid-metal flow in a straight rectangular duct with thin conducting walls is investigated. The duct is divided into a number of rectangular channels by electrically conducting dividing walls. A strong uniform magnetic field is applied parallel to the outer side walls and dividing walls and perpendicular to the top and the bottom walls. The analysis of the flow is performed by means of matched asymptotics at large values of the Hartmann number M. The asymptotic solution obtained is valid for arbitrary wall conductance ratio of the side walls and dividing walls, provided the top and bottom walls are much better conductors than the Hartmann layers. The influence of the Hartmann number, wall conductance ratio, number of channels and duct geometry on pressure losses and flow distribution is investigated. If the Hartmann number is high, the volume flux is carried by the core, occupying the bulk of the fluid and by thin layers with thickness of order M -1/2 . In some of the layers, however, the flow is reversed. As the number of channels increases the flow in the channels close to the centre approaches a Hartmann-type flow with no jets at the side walls. Estimation of pressure-drop increase in radial ducts of a self-cooled liquid-metal blanket with respect to flow in a single duct with walls of the same wall conductance ratio gives an upper limit of 30%. (author). 13 refs., 10 figs., 1 tab

Validation of Fully Automated VMAT Plan Generation for Library-Based Plan-of-the-Day Cervical Cancer Radiotherapy

OpenAIRE

Sharfo, Abdul Wahab M.; Breedveld, Sebastiaan; Voet, Peter W. J.; Heijkoop, Sabrina T.; Mens, Jan-Willem M.; Hoogeman, Mischa S.; Heijmen, Ben J. M.

2016-01-01

textabstractPurpose: To develop and validate fully automated generation of VMAT plan-libraries for plan-of-the-day adaptive radiotherapy in locally-advanced cervical cancer. Material and Methods: Our framework for fully automated treatment plan generation (Erasmus-iCycle) was adapted to create dual-arc VMAT treatment plan libraries for cervical cancer patients. For each of 34 patients, automatically generated VMAT plans (autoVMAT) were compared to manually generated, clinically delivered 9-be...

Status of fully integrated GaAs particle detectors

International Nuclear Information System (INIS)

Braunschweig, W.; Breibach, J.; Kubicki, Th.; Luebelsmeyer, K.; Maesing, Th.; Rente, C.; Roeper, Ch.; Siemes, A.

1999-01-01

GaAs strip detectors are of interest because of their radiation hardness at room temperature and the high absorption coefficient of GaAs for x-rays. The detectors currently under development will be used in the VLQ-experiment at the H1 experiment at the HERA collider. This will be the first high energy physics experiment where GaAs detectors will be used. The detectors have a sensitive area of 5 x 4 cm with a pitch of 62 μ m. Due to the high density of channels the biasing resistors and coupling capacitors are integrated. For the resistors a resistive layer made of Cermet is used. The properties of the first fully integrated strip detector are presented

Enhancement of Treatment Efficiency of Recalcitrant Wastewater Containing Textile Dyes Using a Newly Developed Iron Zeolite Socony Mobil-5 Heterogeneous Catalyst

Science.gov (United States)

Ahmad, Mushtaq; Asghar, Anam; Abdul Raman, Abdul Aziz; Wan Daud, Wan Mohd Ashri

2015-01-01

Fenton oxidation, an advanced oxidation process, is an efficient method for the treatment of recalcitrant wastewaters. Unfortunately, it utilizes H2O2 and iron-based homogeneous catalysts, which lead to the formation of high volumes of sludge and secondary pollutants. To overcome these problems, an alternate option is the usage of heterogeneous catalyst. In this study, a heterogeneous catalyst was developed to provide an alternative solution for homogeneous Fenton oxidation. Iron Zeolite Socony Mobile-5 (Fe-ZSM-5) was synthesized using a new two-step process. Next, the catalyst was characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller analysis and tested against a model wastewater containing the azo dye Acid Blue 113. Results showed that the loading of iron particles reduced the surface area of the catalyst from 293.59 to 243.93 m2/g; meanwhile, the average particle size of the loaded material was 12.29 nm. Furthermore, efficiency of the developed catalyst was evaluated by performing heterogeneous Fenton oxidation. Taguchi method was coupled with principal component analysis in order to assess and optimize mineralization efficiency. Experimental results showed that under optimized conditions, over 99.7% degradation and 77% mineralization was obtained, with a 90% reduction in the consumption of the developed catalyst. Furthermore, the developed catalyst was stable and reusable, with less than 2% leaching observed under optimized conditions. Thus, the present study proved that newly developed catalyst has enhanced the oxidation process and reduced the chemicals consumption. PMID:26517827

Enhancement of Treatment Efficiency of Recalcitrant Wastewater Containing Textile Dyes Using a Newly Developed Iron Zeolite Socony Mobil-5 Heterogeneous Catalyst.

Science.gov (United States)

Ahmad, Mushtaq; Asghar, Anam; Abdul Raman, Abdul Aziz; Wan Daud, Wan Mohd Ashri

2015-01-01

Fenton oxidation, an advanced oxidation process, is an efficient method for the treatment of recalcitrant wastewaters. Unfortunately, it utilizes H2O2 and iron-based homogeneous catalysts, which lead to the formation of high volumes of sludge and secondary pollutants. To overcome these problems, an alternate option is the usage of heterogeneous catalyst. In this study, a heterogeneous catalyst was developed to provide an alternative solution for homogeneous Fenton oxidation. Iron Zeolite Socony Mobile-5 (Fe-ZSM-5) was synthesized using a new two-step process. Next, the catalyst was characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller analysis and tested against a model wastewater containing the azo dye Acid Blue 113. Results showed that the loading of iron particles reduced the surface area of the catalyst from 293.59 to 243.93 m2/g; meanwhile, the average particle size of the loaded material was 12.29 nm. Furthermore, efficiency of the developed catalyst was evaluated by performing heterogeneous Fenton oxidation. Taguchi method was coupled with principal component analysis in order to assess and optimize mineralization efficiency. Experimental results showed that under optimized conditions, over 99.7% degradation and 77% mineralization was obtained, with a 90% reduction in the consumption of the developed catalyst. Furthermore, the developed catalyst was stable and reusable, with less than 2% leaching observed under optimized conditions. Thus, the present study proved that newly developed catalyst has enhanced the oxidation process and reduced the chemicals consumption.

A fully adaptive hybrid optimization of aircraft engine blades

Science.gov (United States)

Dumas, L.; Druez, B.; Lecerf, N.

2009-10-01

A new fully adaptive hybrid optimization method (AHM) has been developed and applied to an industrial problem in the field of the aircraft engine industry. The adaptivity of the coupling between a global search by a population-based method (Genetic Algorithms or Evolution Strategies) and the local search by a descent method has been particularly emphasized. On various analytical test cases, the AHM method overperforms the original global search method in terms of computational time and accuracy. The results obtained on the industrial case have also confirmed the interest of AHM for the design of new and original solutions in an affordable time.

Uniformity of fully gravure printed organic field-effect transistors

International Nuclear Information System (INIS)

Hambsch, M.; Reuter, K.; Stanel, M.; Schmidt, G.; Kempa, H.; Fuegmann, U.; Hahn, U.; Huebler, A.C.

2010-01-01

Fully mass-printed organic field-effect transistors were made completely by means of gravure printing. Therefore a special printing layout was developed in order to avoid register problems in print direction. Upon using this layout, contact pads for source-drain electrodes of the transistors are printed together with the gate electrodes in one and the same printing run. More than 50,000 transistors have been produced and by random tests a yield of approximately 75% has been determined. The principle suitability of the gravure printed transistors for integrated circuits has been shown by the realization of ring oscillators.

The fully integrated biomedical engineering programme at Eindhoven University of Technology.

Science.gov (United States)

Slaaf, D W; van Genderen, M H P

2009-05-01

The development of a fully integrated biomedical engineering programme (life sciences included from the start) is described. Details are provided about background, implementation, and didactic concept: design centred learning combined with courses. The curriculum has developed into a bachelor-master's programme with two different master's degrees: Master's Degree in Biomedical Engineering and Master's Degree in Medical Engineering. Recently, the programme has adopted semester programming, has included a major and minor in the bachelor's degree phase, and a true bachelor's degree final project. Details about the programme and data about where graduates find jobs are provided in this paper.

Physics of fully ionized regions

International Nuclear Information System (INIS)

Flower, D.

1975-01-01

In this paper the term fully ionised regions is taken to embrace both planetary nebulae and the so-called 'H II' regions referred to as H + regions. Whilst these two types of gaseous nebulae are very different from an evolutionary standpoint, they are physically very similar, being characterised by photoionisation of a low-density plasma by a hot star. (Auth.)

Quantum Fully Homomorphic Encryption with Verification

DEFF Research Database (Denmark)

Alagic, Gorjan; Dulek, Yfke; Schaffner, Christian

2017-01-01

Fully-homomorphic encryption (FHE) enables computation on encrypted data while maintaining secrecy. Recent research has shown that such schemes exist even for quantum computation. Given the numerous applications of classical FHE (zero-knowledge proofs, secure two-party computation, obfuscation, e...

Fully porous 3D printed titanium femoral stem to reduce stress-shielding following total hip arthroplasty.

Science.gov (United States)

Arabnejad, Sajad; Johnston, Burnett; Tanzer, Michael; Pasini, Damiano

2017-08-01

Current hip replacement femoral implants are made of fully solid materials which all have stiffness considerably higher than that of bone. This mechanical mismatch can cause significant bone resorption secondary to stress shielding, which can lead to serious complications such as peri-prosthetic fracture during or after revision surgery. In this work, a high strength fully porous material with tunable mechanical properties is introduced for use in hip replacement design. The implant macro geometry is based off of a short stem taper-wedge implant compatible with minimally invasive hip replacement surgery. The implant micro-architecture is fine-tuned to locally mimic bone tissue properties which results in minimum bone resorption secondary to stress shielding. We present a systematic approach for the design of a 3D printed fully porous hip implant that encompasses the whole activity spectrum of implant development, from concept generation, multiscale mechanics of porous materials, material architecture tailoring, to additive manufacturing, and performance assessment via in vitro experiments in composite femurs. We show that the fully porous implant with an optimized material micro-structure can reduce the amount of bone loss secondary to stress shielding by 75% compared to a fully solid implant. This result also agrees with those of the in vitro quasi-physiological experimental model and the corresponding finite element model for both the optimized fully porous and fully solid implant. These studies demonstrate the merit and the potential of tuning material architecture to achieve a substantial reduction of bone resorption secondary to stress shielding. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1774-1783, 2017. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

CMOS serial link for fully duplexed data communication

Science.gov (United States)

Lee, Kyeongho; Kim, Sungjoon; Ahn, Gijung; Jeong, Deog-Kyoon

1995-04-01

This paper describes a CMOS serial link allowing fully duplexed 500 Mbaud serial data communication. The CMOS serial link is a robust and low-cost solution to high data rate requirements. A central charge pump PLL for generating multiphase clocks for oversampling is shared by several serial link channels. Fully duplexed serial data communication is realized in the bidirectional bridge by separating incoming data from the mixed signal on the cable end. The digital PLL accomplishes process-independent data recovery by using a low-ratio oversampling, a majority voting, and a parallel data recovery scheme. Mostly, digital approach could extend its bandwidth further with scaled CMOS technology. A single channel serial link and a charge pump PLL are integrated in a test chip using 1.2 micron CMOS process technology. The test chip confirms upto 500 Mbaud unidirectional mode operation and 320 Mbaud fully duplexed mode operation with pseudo random data patterns.

Compressive failure modes and parameter optimization of the trabecular structure of biomimetic fully integrated honeycomb plates.

Science.gov (United States)

Chen, Jinxiang; Tuo, Wanyong; Zhang, Xiaoming; He, Chenglin; Xie, Juan; Liu, Chang

2016-12-01

To develop lightweight biomimetic composite structures, the compressive failure and mechanical properties of fully integrated honeycomb plates were investigated experimentally and through the finite element method. The results indicated that: fracturing of the fully integrated honeycomb plates primarily occurred in the core layer, including the sealing edge structure. The morphological failures can be classified into two types, namely dislocations and compactions, and were caused primarily by the stress concentrations at the interfaces between the core layer and the upper and lower laminations and secondarily by the disordered short-fiber distribution in the material; although the fully integrated honeycomb plates manufactured in this experiment were imperfect, their mass-specific compressive strength was superior to that of similar biomimetic samples. Therefore, the proposed bio-inspired structure possesses good overall mechanical properties, and a range of parameters, such as the diameter of the transition arc, was defined for enhancing the design of fully integrated honeycomb plates and improving their compressive mechanical properties. Copyright © 2016 Elsevier B.V. All rights reserved.

Physics of fully depleted CCDs

International Nuclear Information System (INIS)

Holland, S E; Bebek, C J; Kolbe, W F; Lee, J S

2014-01-01

In this work we present simple, physics-based models for two effects that have been noted in the fully depleted CCDs that are presently used in the Dark Energy Survey Camera. The first effect is the observation that the point-spread function increases slightly with the signal level. This is explained by considering the effect on charge-carrier diffusion due to the reduction in the magnitude of the channel potential as collected signal charge acts to partially neutralize the fixed charge in the depleted channel. The resulting reduced voltage drop across the carrier drift region decreases the vertical electric field and increases the carrier transit time. The second effect is the observation of low-level, concentric ring patterns seen in uniformly illuminated images. This effect is shown to be most likely due to lateral deflection of charge during the transit of the photo-generated carriers to the potential wells as a result of lateral electric fields. The lateral fields are a result of space charge in the fully depleted substrates arising from resistivity variations inherent to the growth of the high-resistivity silicon used to fabricate the CCDs

Radiation therapy of newly diagnosed, advanced prostatic cancer and hormonally relapsed prostatic cancer

International Nuclear Information System (INIS)

Suzuki, Minoru; Fujiwara, Kazuhisa; Hayakawa, Katsumi; Hida, Shuichi

1994-01-01

Ten patients with newly diagnosed, advanced prostatic cancer were treated with radiotherapy and hormone therapy to improve tumor control and survival. Eight patients with hormonally relapsed prostatic cancer were treated with radiotherapy to improve their quality of life. Local control of the tumor was achieved in 9 of 10 patients with newly diagnosed, advanced prostatic cancer. Five of eight patients with hormonally relapsed prostatic cancer obtained improved quality of life. Combined radiotherapy and hormone therapy were effective in the treatment of newly diagnosed, advanced prostatic cancer, and radiotherapy was useful for improving the quality of life of patients with hormonally relapsed prostatic cancer. (author)

Three Newly Naturalized Plants in Taiwan

Directory of Open Access Journals (Sweden)

Ming-Jer Jung

2009-11-01

Full Text Available Three newly naturalized plants are reported in this paper. Hypochaeris microcephala (Sch. Bip. Cabrera var. albiflora (Kuntze Cabrera (Asteraceae is naturalized in urban areas of northern Taiwan. Indigofera pseudo-tinctoria Matsum. (Leguminosae is naturalized in low elevations of northern and southern Taiwan and in middle elevations of central Taiwan. Lamium purpureum L. (Laminaceae has become naturalized locally in middle elevations of central Taiwan. Descriptions, illustrations and color photos of these plants are provided.

Development of innovative micro-pattern gaseous detectors with resistive electrodes and first results of their applications

CERN Document Server

Di Mauro, A; Martinengo, P; Nappi, E; Oliveira, R; Peskov, Vladimir; Periale, L; Picchi, P; Pietropaolo, F; Rodionov, I; Santiard, Jean-Claude

2007-01-01

The paper summarizes our latest progress in the development of newly introduced micro pattern gaseous detectors with resistive electrodes. These resistive electrodes protect the detector and the front-end electronics in case of occasional discharges and thus make the detectors very robust and reliable in operation. As an example, we describe in greater detail a new recently developed GEM-like detector, fully spark-protected with electrodes made of resistive kapton. We discovered that all resistive layers used in these studies (including kapton), that are coated with photosensitive layers, such as CsI, can be used as efficient photo cathodes for detectors operating in a pulse counting mode. We describe the first applications of such detectors combined with CsI or SbCs photo cathodes for the detection of UV photons at room and cryogenic temperatures.

Mixed Convective Fully Developed Flow in a Vertical Channel in the Presence of Thermal Radiation and Viscous Dissipation

Directory of Open Access Journals (Sweden)

Prasad K.V.

2017-02-01

Full Text Available The effect of thermal radiation and viscous dissipation on a combined free and forced convective flow in a vertical channel is investigated for a fully developed flow regime. Boussinesq and Roseseland approximations are considered in the modeling of the conduction radiation heat transfer with thermal boundary conditions (isothermal-thermal, isoflux-thermal, and isothermal-flux. The coupled nonlinear governing equations are also solved analytically using the Differential Transform Method (DTM and regular perturbation method (PM. The results are analyzed graphically for various governing parameters such as the mixed convection parameter, radiation parameter, Brinkman number and perturbation parameter for equal and different wall temperatures. It is found that the viscous dissipation enhances the flow reversal in the case of a downward flow while it counters the flow in the case of an upward flow. A comparison of the Differential Transform Method (DTM and regular perturbation method (PM methods shows the versatility of the Differential Transform Method (DTM. The skin friction and the wall temperature gradient are presented for different values of the physical parameters and the salient features are analyzed.

The $16,819 pay gap for newly trained physicians: the unexplained trend of men earning more than women.

Science.gov (United States)

Lo Sasso, Anthony T; Richards, Michael R; Chou, Chiu-Fang; Gerber, Susan E

2011-02-01

Prior research has suggested that gender differences in physicians' salaries can be accounted for by the tendency of women to enter primary care fields and work fewer hours. However, in examining starting salaries by gender of physicians leaving residency programs in New York State during 1999-2008, we found a significant gender gap that cannot be explained by specialty choice, practice setting, work hours, or other characteristics. The unexplained trend toward diverging salaries appears to be a recent development that is growing over time. In 2008, male physicians newly trained in New York State made on average $16,819 more than newly trained female physicians, compared to a $3,600 difference in 1999.

A Newly Developed Perfused Umbrella Electrode for Radiofrequency Ablation: An Ex Vivo Evaluation Study in Bovine Liver

International Nuclear Information System (INIS)

Bruners, Philipp; Pfeffer, Jochen; Kazim, Rana M.; Guenther, Rolf W.; Schmitz-Rode, Thomas; Mahnken, Andreas H.

2007-01-01

The purpose of this study was to evaluate the effectiveness of a newly developed perfused monopolar radiofrequency (RF) probe with an umbrella-shaped array. A perfused umbrella-shaped monopolar RF probe based on a LeVeen electrode (Boston Scientific Corp., Natick, MA, USA) with a 3-cm array diameter was developed. Five different configurations of this electrode were tested: (a) perfusion channel/endhole, (b) perfusion channel/endhole + sideholes, (c) 1 cm insulation removed at the tip, (d) 1 cm insulation removed at the tip + perfusion channel/endhole, and (e) 1 cm insulation removed at the tip + perfusion channel/endhole + sideholes. An unmodified LeVeen electrode served as a reference standard. RF ablations were performed in freshly excised bovine liver using a commercial monopolar RF system with a 200-W generator (RF 3000; Boston Scientific Corp.). Each electrode was tested 10 times applying the vendor's recommended ablation protocol combined with the preinjection of 2 ml 0.9% saline. Volumes and shapes of the lesions were compared. Lesions generated with the original LeVeen electrode showed a mean volume of 12.74 ± 0.52 cm 3 . Removing parts of the insulation led to larger coagulation volumes (22.65 ± 2.12 cm 3 ). Depending on the configuration, saline preinjection resulted in a further increase in coagulation volume (25.22 ± 3.37 to 31.28 ± 2.32 cm 3 ). Besides lesion volume, the shape of the ablation zone was influenced by the configuration of the electrode used. We conclude that saline preinjection in combination with increasing the active tip length of the umbrella-shaped LeVeen RF probe allows the reliable ablation of larger volumes in comparison to the originally configured electrode

Assessment of a Newly Developed, Active Pneumatic-Driven, Sensorimotor Test and Training Device

Directory of Open Access Journals (Sweden)

Wolfram Haslinger

2014-12-01

Full Text Available The sensorimotor system (SMS plays an important role in sports and in every day movement. Several tools for assessment and training have been designed. Many of them are directed to specific populations, and have major shortcomings due to the training effect or safety. The aim of the present study was to design and assess a dynamic sensorimotor test and training device that can be adjusted for all levels of performance. The novel pneumatic-driven mechatronic device can guide the trainee, allow independent movements or disrupt the individual with unpredicted perturbations while standing on a platform. The test-reliability was evaluated using intraclass correlation coefficient (ICC. Subjects were required to balance their center of pressure (COP in a target circle (TITC. The time in TITC and the COP error (COPe were recorded for analysis. The results of 22 males and 14 females (23.7 ± 2.6 years showed good to excellent test–retest reliability. The newly designed Active Balance System (ABS was then compared with the Biodex Balance System SD® (BBS. The results of 15 females, 14 males (23.4 ± 1.6 years showed modest correlation in static and acceptable correlation in dynamic conditions, suggesting that ABS could be a reliable and comparable tool for dynamic balance assessments.

A Fast GPU-accelerated Mixed-precision Strategy for Fully NonlinearWater Wave Computations

DEFF Research Database (Denmark)

Glimberg, Stefan Lemvig; Engsig-Karup, Allan Peter; Madsen, Morten G.

2011-01-01

We present performance results of a mixed-precision strategy developed to improve a recently developed massively parallel GPU-accelerated tool for fast and scalable simulation of unsteady fully nonlinear free surface water waves over uneven depths (Engsig-Karup et.al. 2011). The underlying wave......-preconditioned defect correction method. The improved strategy improves the performance by exploiting architectural features of modern GPUs for mixed precision computations and is tested in a recently developed generic library for fast prototyping of PDE solvers. The new wave tool is applicable to solve and analyze...

Development and validation of P-MODTRAN7 and P-MCScene, 1D and 3D polarimetric radiative transfer models

Science.gov (United States)

Hawes, Frederick T.; Berk, Alexander; Richtsmeier, Steven C.

2016-05-01

A validated, polarimetric 3-dimensional simulation capability, P-MCScene, is being developed by generalizing Spectral Sciences' Monte Carlo-based synthetic scene simulation model, MCScene, to include calculation of all 4 Stokes components. P-MCScene polarimetric optical databases will be generated by a new version (MODTRAN7) of the government-standard MODTRAN radiative transfer algorithm. The conversion of MODTRAN6 to a polarimetric model is being accomplished by (1) introducing polarimetric data, by (2) vectorizing the MODTRAN radiation calculations and by (3) integrating the newly revised and validated vector discrete ordinate model VDISORT3. Early results, presented here, demonstrate a clear pathway to the long-term goal of fully validated polarimetric models.

Development of fully dense and high performance powder metallurgy HSLA steel using HIP method

Science.gov (United States)

Liu, Wensheng; Pang, Xinkuan; Ma, Yunzhu; Cai, Qingshan; Zhu, Wentan; Liang, Chaoping

2018-05-01

In order to solve the problem that the mechanical properties of powder metallurgy (P/M) steels are much lower than those of traditional cast steels with the same composition due to their porosity, a high–strength–low–alloy (HSLA) steel with fully dense and excellent mechanical properties was fabricated through hot isostatic pressing (HIP) using gas–atomized powders. The granular structure in the P/M HIPed steel composed of bainitic ferrite and martensite–austenite (M–A) islands is obtained without the need of any rapid cooling. The P/M HIPed steel exhibit a combination of tensile strength and ductility that surpasses that of conventional cast steel and P/M sintered steel, confirming the feasibility of fabricating high performance P/M steel through appropriate microstructural control and manufacture process.

Validation of mentorship model for newly qualified professional ...

African Journals Online (AJOL)

Newly qualified professional nurses (NQPNs) allocated to community health care services require the use of validated model to practice independently. Validation was done to adapt and assess if the model is understood and could be implemented by NQPNs and mentors employed in community health care services.

Newly developed dope-free coatings help improve running operations in remote protected areas

Energy Technology Data Exchange (ETDEWEB)

Santi, Nestor J.; Gallo, Ernesto A. [TENARIS (Brazil)

2008-07-01

The Oil and Gas industry has been evolving in a permanent way to reach new sources of energy or to produce in the existing ones in a more efficient way, triggering in such a way the development of new drilling, completion and production techniques, equipment and processes; among these equipment, pipes and connections are not the exception, and the requirements on material and connections performance and reliability have been increased as well. The complexity of the new wells is not only related to the architecture of the well but also to the type of environments that are being found such as H2S, CO2, high pressure and/or high temperature; therefore, for these cases, connections have to be special premium connections threaded in most of the cases on highly alloyed materials (Ni-Cr alloys). Additionally, most of the regions under exploration are offshore and/or in remote areas of the planet which are considered untouchable due to economic reasons (fishing) or preservation (endangered flora and fauna) for instance Alaska, North Atlantic, North Sea, etc. For these areas, new environmental restrictions are applied which make it difficult for the operators to use standard practices. Among the recent solutions developed for Oil and Gas industry aiming to help with the protection of the environment are the dope-free coatings. These coatings are applied on tubing and casing connections providing a real greener alternative to traditional thread compounds, while maintaining the performance of the connections, for different materials as carbon steels, 13Cr and Corrosion Resistance Alloys (Ni, Cr). In spite of being a technically sound solution, the elimination of thread compounds may lead to potential operational problems such as galling, difficulties in making-up due to low temperature, etc. In addition, it is also necessary to evaluate the interaction between the dry coatings and the different connections to be used, as the designs have to be able to allocate the coating

Transient electromagnetic detecting technique for water hazard to the roof of fully mechanized sub-level caving face

Energy Technology Data Exchange (ETDEWEB)

Yu Jing-cun; Liu Zhi-xin; Tang Jin-yun; Wang Yang-zhou [China University of Mining & Technology, Xuzhou (China). School of Resources and Geoscience Science

2007-07-01

In coal mining, with the popularization of fully mechanized equipment, the roof control becomes more and more important. The development of water body in roofs may seriously affect the efficiency of the fully mechanized mining, quite possible to cause an accident in working face. Therefore, to make clear the position of a water body located in roofs so as to provide a basis for water drainage borehole layout is an urgent problem to be solved by geophysical exploration. Based on the transient electromagnetic theory and the technique used on ground surface and on the actual situation in underground coal mines, a square superimposed loop device (2 m in side length) which is non-contact and multi-turns was developed to detect the water bodies in coal seam roofs. Based on the 'smoke ring effect' theory and the physical simulation criterion, the mathematical model for calculating the apparent resistivity of full space transient electromagnetism is deduced. In addition, the water detection technology for the roof of fully mechanized sub-level caving face was researched and applied in several coal mines, which has been verified by boreholes and mining practice, indicating that this method is very effective in detecting the water source in the roof of fully mechanized sub-level caving face. 11 refs., 5 figs.

Fully simulatable quantum-secure coin-flipping and applications

DEFF Research Database (Denmark)

Lunemann, Carolin; Nielsen, Jesper Buus

2011-01-01

schemes which we show how to construct in the given setting. We then show that the interactive generation of random coins at the beginning or during outer protocols allows for quantum-secure realizations of classical schemes, again without any set-up assumptions. As example applications we discuss quantum...... zero-knowledge proofs of knowledge and quantum-secure two-party function evaluation. Both applications assume only fully simulatable coin-flipping and mixed commitments. Since our framework allows to construct fully simulatable coin-flipping from mixed commitments, this in particular shows that mixed...

Fully conditional specification in multivariate imputation

NARCIS (Netherlands)

van Buuren, S.; Brand, J. P.L.; Groothuis-Oudshoorn, C. G.M.; Rubin, D. B.

2006-01-01

The use of the Gibbs sampler with fully conditionally specified models, where the distribution of each variable given the other variables is the starting point, has become a popular method to create imputations in incomplete multivariate data. The theoretical weakness of this approach is that the

A fully printed ferrite nano-particle ink based tunable antenna

KAUST Repository

Ghaffar, Farhan A.; Vaseem, Mohammad; Shamim, Atif

2016-01-01

on conventional microwave substrates. In order to have a fully printed fabrication process, the substrate also need to be printed. In this paper, a fully printed multi-layer process utilizing custom Fe2O3 based magnetic ink and a silver organic complex (SOC) ink

Justification of the technical requirements of a fully functional modular robot

Directory of Open Access Journals (Sweden)

Shlyakhov Nikita

2017-01-01

Full Text Available Modular robots are characterized by limited built-in resources necessary for communication, connection and movement of modules, when performing reconfiguration tasks at rigidly interconnected elements. In developing the technological fundamentals of designing modular robots with pairwise connection mechanisms, we analysed modern hardware and model algorithms typical of a fully functional robot, which provide independent locomotion, communication, navigation, decentralized power and control. A survey of actuators, batteries, sensors, communication means, suitable for modular robotics is presented.

Communication: Fully coherent quantum state hopping

Energy Technology Data Exchange (ETDEWEB)

Martens, Craig C., E-mail: cmartens@uci.edu [University of California, Irvine, California 92697-2025 (United States)

2015-10-14

In this paper, we describe a new and fully coherent stochastic surface hopping method for simulating mixed quantum-classical systems. We illustrate the approach on the simple but unforgiving problem of quantum evolution of a two-state quantum system in the limit of unperturbed pure state dynamics and for dissipative evolution in the presence of both stationary and nonstationary random environments. We formulate our approach in the Liouville representation and describe the density matrix elements by ensembles of trajectories. Population dynamics are represented by stochastic surface hops for trajectories representing diagonal density matrix elements. These are combined with an unconventional coherent stochastic hopping algorithm for trajectories representing off-diagonal quantum coherences. The latter generalizes the binary (0,1) “probability” of a trajectory to be associated with a given state to allow integers that can be negative or greater than unity in magnitude. Unlike existing surface hopping methods, the dynamics of the ensembles are fully entangled, correctly capturing the coherent and nonlocal structure of quantum mechanics.

Newly divided eosinophils limit ozone-induced airway hyperreactivity in nonsensitized guinea pigs.

Science.gov (United States)

Wicher, Sarah A; Jacoby, David B; Fryer, Allison D

2017-06-01

Ozone causes vagally mediated airway hyperreactivity and recruits inflammatory cells, including eosinophils, to lungs, where they mediate ozone-induced hyperreactivity 1 day after exposure but are paradoxically protective 3 days later. We aimed to test the role of newly divided eosinophils in ozone-induced airway hyperreactivity in sensitized and nonsensitized guinea pigs. Nonsensitized and sensitized guinea pigs were treated with 5-bromo-2-deoxyuridine (BrdU) to label newly divided cells and were exposed to air or ozone for 4 h. Later (1 or 3 days later), vagally induced bronchoconstriction was measured, and inflammatory cells were harvested from bone marrow, blood, and bronchoalveolar lavage. Ozone induced eosinophil hematopoiesis. One day after ozone, mature eosinophils dominate the inflammatory response and potentiate vagally induced bronchoconstriction. However, by 3 days, newly divided eosinophils have reached the lungs, where they inhibit ozone-induced airway hyperreactivity because depleting them with antibody to IL-5 or a TNF-α antagonist worsened vagally induced bronchoconstriction. In sensitized guinea pigs, both ozone-induced eosinophil hematopoiesis and subsequent recruitment of newly divided eosinophils to lungs 3 days later failed to occur. Thus mature eosinophils dominated the ozone-induced inflammatory response in sensitized guinea pigs. Depleting these mature eosinophils prevented ozone-induced airway hyperreactivity in sensitized animals. Ozone induces eosinophil hematopoiesis and recruitment to lungs, where 3 days later, newly divided eosinophils attenuate vagally mediated hyperreactivity. Ozone-induced hematopoiesis of beneficial eosinophils is blocked by a TNF-α antagonist or by prior sensitization. In these animals, mature eosinophils are associated with hyperreactivity. Thus interventions targeting eosinophils, although beneficial in atopic individuals, may delay resolution of airway hyperreactivity in nonatopic individuals. Copyright �

Fully convolutional network with cluster for semantic segmentation

Science.gov (United States)

Ma, Xiao; Chen, Zhongbi; Zhang, Jianlin

2018-04-01

At present, image semantic segmentation technology has been an active research topic for scientists in the field of computer vision and artificial intelligence. Especially, the extensive research of deep neural network in image recognition greatly promotes the development of semantic segmentation. This paper puts forward a method based on fully convolutional network, by cluster algorithm k-means. The cluster algorithm using the image's low-level features and initializing the cluster centers by the super-pixel segmentation is proposed to correct the set of points with low reliability, which are mistakenly classified in great probability, by the set of points with high reliability in each clustering regions. This method refines the segmentation of the target contour and improves the accuracy of the image segmentation.

Laboratory model study of newly deposited dredger fills using improved multiple-vacuum preloading technique

Directory of Open Access Journals (Sweden)

Jingjin Liu

2017-10-01

Full Text Available Problems continue to be encountered concerning the traditional vacuum preloading method in field during the treatment of newly deposited dredger fills. In this paper, an improved multiple-vacuum preloading method was developed to consolidate newly dredger fills that are hydraulically placed in seawater for land reclamation in Lingang Industrial Zone of Tianjin City, China. With this multiple-vacuum preloading method, the newly deposited dredger fills could be treated effectively by adopting a novel moisture separator and a rapid improvement technique without sand cushion. A series of model tests was conducted in the laboratory for comparing the results from the multiple-vacuum preloading method and the traditional one. Ten piezometers and settlement plates were installed to measure the variations in excess pore water pressures and moisture content, and vane shear strength was measured at different positions. The testing results indicate that water discharge–time curves obtained by the traditional vacuum preloading method can be divided into three phases: rapid growth phase, slow growth phase, and steady phase. According to the process of fluid flow concentrated along tiny ripples and building of larger channels inside soils during the whole vacuum loading process, the fluctuations of pore water pressure during each loading step are divided into three phases: steady phase, rapid dissipation phase, and slow dissipation phase. An optimal loading pattern which could have a best treatment effect was proposed for calculating the water discharge and pore water pressure of soil using the improved multiple-vacuum preloading method. For the newly deposited dredger fills at Lingang Industrial Zone of Tianjin City, the best loading step was 20 kPa and the loading of 40–50 kPa produced the highest drainage consolidation. The measured moisture content and vane shear strength were discussed in terms of the effect of reinforcement, both of which indicate

Examination of in vivo gelatinolytic activity in rheumatoid arthritis synovial tissue using newly developed in situ zymography and image analyzer.

Science.gov (United States)

Yoshida, W; Uzuki, M; Nishida, J; Shimamura, T; Sawai, T

2009-01-01

The aim of this study was to examine in vivo gelatinolytic activity of rheumatoid arthritis (RA) synovium using a newly developed in situ zymography (ISZ) method and pathological image analyzer, and to evaluate the relationship between this activity and several features on RA. A total of 8 samples of synovium were obtained from RA patients during surgery, and 8 samples from osteoarthritis (OA) patients were examined as controls. Furthermore, total 14 samples of syovium were obtained for comparison among radiographical classifications as Larsen grade (4 cases of grade III, 5 cases of grade IV and 5 cases of grade V). These specimens were frozen with OCT compound immediately after surgery. Frozen sections were applied to a newly developed gelatin-coated FIZ film (Fuji Film Co.Tokyo.Japan) designed for use ISZ, and incubated at 37 degrees C for 6 hours. Using an image analyzer (image processor for analytical pathology; IPAP), two variables were measured as indicators of in vivo gelatynolytic activity: optical density of gelatinolyzed area (ODG), and ratio of gelatinolyzed area (RGA). Also, we investigated the relationship between these indicators and the following variables: radiographic changes (Larsen grades), clinical data (C-reactive protein concentration), histological score of synovial tissue (modified Rooney's score), and expression of matrix metalloproteinase (MMP)-2, MMP-9, tissue inhibitor of metalloproteinase (TIMP)-1 and TIMP-2 (assessed by immunohistochemistry). RA synovium had significantly higher RGA and lower ODG than OA, indicating higher gelatinolytic activity in RA. Synovium from cases with Larsen grade IV or V had significantly lower ODG than cases with grade III, but there was no significant difference in RGA between grades. There was no significant correlation between gelatinolytic activity (ODG or RGA) and either CRP or modified Rooney's Histological Score. The results of ISZ indicate that the gelatinolyzed areas were mainly localized in the

Fully hadronic ttbar cross section measurement with ATLAS detector

CERN Document Server

Bertella, C; The ATLAS collaboration

2011-01-01

The top quark pair production cross section in the fully hadronic final state is characterized by a six jet topology, two of which could be identified as originating from a b-quark using ATLAS b-tagging algorithms. Compared to other decay channels, this final state presents an advantageous larger branching ratio; on the other hand it suffers from a very large QCD multi-jet background, generally difficult to estimate from Monte Carlo simulation and therefore evaluated using data-driven techniques. It is essential, to efficiently trigger on these fully hadronic ttbar events, to use dedicated triggers. An overview of the analysis for ttbar production cross section measurement in the fully hadronic final state and the state-of-the-art of the b-jet trigger performance estimation are presented in this contribution.

Fully integrated low-loss band-pass filters for wireless applications

International Nuclear Information System (INIS)

Rais-Zadeh, M; Kapoor, A; Lavasani, H M; Ayazi, F

2009-01-01

Fully integrated low insertion loss micromachined band-pass filters are designed and fabricated on the silicon substrate (ρ = 10–20 Ω cm, ε r = 11.9) for UHF applications. Filters are made of silver, which has the highest conductivity of all metals, to minimize the ohmic loss. A detailed analysis for realizing low insertion loss and high out-of-band rejection filters using elliptic magnitude characteristics is presented, and a comprehensive model to take into account inductive parasitics of the interconnects is developed. Temperature characteristics of the filters are measured and show stable performance. The presented filters are different from the previously reported lumped element filters in that all filters are fully integrated on silicon substrate and occupy a remarkably smaller die area. Two filters are fabricated using the silver micromachining technique with center frequencies at 1.05 and 1.35 GHz. The filters have a constant 3 dB bandwidth of 300 MHz (28.6% and 22.2%) and an insertion loss of 1.4–1.7 dB. The low insertion loss and CMOS compatibility make the presented filters suitable candidates for radio frequency integrated circuits

Neuropsychological and psychological interventions for people with newly diagnosed epilepsy.

Science.gov (United States)

Jackson, Cerian F; Makin, Selina M; Baker, Gus A

2015-07-22

Many people with epilepsy report experiencing psychological difficulties such as anxiety, depression and neuropsychological deficits including memory problems. Research has shown that these difficulties are often present not only for people with chronic epilepsy but also for people with newly diagnosed epilepsy. Despite this, there are very few published interventions that detail means to help people with newly diagnosed epilepsy manage these problems. To identify and assess possible psychological and neuropsychological interventions for adults with newly diagnosed epilepsy. We searched the following databases on 30 June 2015: the Cochrane Epilepsy Group Specialized Register, the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE (Ovid), SCOPUS, PsycINFO, CINAHL, ClinicalTrials.gov and the World Health Organization (WHO) International Clinical Trials Registry Platform (ICTRP). This review includes all randomised controlled trials, quasi-randomised controlled trials, prospective cohort controlled studies, and prospective before and after studies which include psychological or neuropsychological interventions for people with newly diagnosed epilepsy. We excluded studies that included people with epilepsy and any other psychological disorder or neurological condition. We excluded studies carried out which recruited only children. We used the standard methodological procedure expected by The Cochrane Collaboration. Two authors independently completed data extraction and risk of bias analysis. The results of this were cross-checked and third author resolved any discrepancies. In the event of missing data, we contacted the study authors. Meta-analysis was not completed due to differences in the intervention and outcomes reported in the two studies. We included two randomised controlled trials assessing psychological interventions for people with newly diagnosed epilepsy. One study assessed a cognitive behavioural intervention (CBI) in an adolescent

Isogeometric variational multiscale large-eddy simulation of fully-developed turbulent flow over a wavy wall

KAUST Repository

Chang, Kyungsik; Hughes, Thomas Jr R; Calo, Victor M.

2012-01-01

We report on the isogeometric residual-based variational multiscale (VMS) large eddy simulation of a fully developed turbulent flow over a wavy wall. To assess the predictive capability of the VMS modeling framework, we compare its predictions against the results from direct numerical simulation (DNS) and large eddy simulation (LES) and, when available, against experimental measurements. We use C 1 quadratic B-spline basis functions to represent the smooth geometry of the sinusoidal lower wall and the solution variables. The Reynolds numbers of the flows considered are 6760 and 30,000 based on the bulk velocity and average channel height. The ratio of amplitude to wavelength (α/λ) of the sinusoidal wavy surface is set to 0.05. The computational domain is 2λ×1.05λ×λ in the streamwise, wall-normal and spanwise directions, respectively. For the Re=6760 case, mean averaged quantities, including velocity and pressure profiles, and the separation/reattachment points in the recirculation region, are compared with DNS and experimental data. The turbulent kinetic energy and Reynolds stress are in good agreement with benchmark data. Coherent structures over the wavy wall are observed in isosurfaces of the Q-criterion and show similar features to those previously reported in the literature. Comparable accuracy to DNS solutions is obtained with at least one order of magnitude fewer degrees of freedom. For the Re=30,000 case, good agreement was obtained for mean wall shear stress and velocity profiles compared with available LES results reported in the literature. © 2012 Elsevier Ltd.

Isogeometric variational multiscale large-eddy simulation of fully-developed turbulent flow over a wavy wall

KAUST Repository

Chang, Kyungsik

2012-09-01

We report on the isogeometric residual-based variational multiscale (VMS) large eddy simulation of a fully developed turbulent flow over a wavy wall. To assess the predictive capability of the VMS modeling framework, we compare its predictions against the results from direct numerical simulation (DNS) and large eddy simulation (LES) and, when available, against experimental measurements. We use C 1 quadratic B-spline basis functions to represent the smooth geometry of the sinusoidal lower wall and the solution variables. The Reynolds numbers of the flows considered are 6760 and 30,000 based on the bulk velocity and average channel height. The ratio of amplitude to wavelength (α/λ) of the sinusoidal wavy surface is set to 0.05. The computational domain is 2λ×1.05λ×λ in the streamwise, wall-normal and spanwise directions, respectively. For the Re=6760 case, mean averaged quantities, including velocity and pressure profiles, and the separation/reattachment points in the recirculation region, are compared with DNS and experimental data. The turbulent kinetic energy and Reynolds stress are in good agreement with benchmark data. Coherent structures over the wavy wall are observed in isosurfaces of the Q-criterion and show similar features to those previously reported in the literature. Comparable accuracy to DNS solutions is obtained with at least one order of magnitude fewer degrees of freedom. For the Re=30,000 case, good agreement was obtained for mean wall shear stress and velocity profiles compared with available LES results reported in the literature. © 2012 Elsevier Ltd.

Large Eddy Simulation of Turbulence Modification and Particle Dispersion in a Fully-Developed Pipe Flow

Science.gov (United States)

Rani, Sarma; Pratap Vanka, Surya

1999-11-01

A LES study of the modification of turbulence in a fully-developed turbulent pipe flow by dispersed heavy particles at Re_τ = 360 is presented. A 64 (radial) x 64 (azimuthal) x 128 (axial) grid has been used. An Eulerian-Lagrangian approach has been used for treating the continuous and the dispersed phases respectively. The particle equation of motion included only the drag force. Three different LES models are used in the continuous fluid simulation: (i) A “No-Model” LES (coarse-grid DNS) (ii) Smagorinsky’s model and (iii) Schumann’s model . The motivation behind employing the Schumann’s model is to study the impact of sub-grid-scale fluctuations on the particle motion and their (SGS fluctuations) modulation, in turn, by the particles. The effect of particles on fluid turbulence is investigated by tracking 100000 particles of different diameters. Our studies confirm the preferential concentration of particles in the near wall region. It is observed that the inclusion of two-way coupling reduces the preferential concentration of particles. In addition, it was found that two-way coupling attenuates the fluid turbulence. However, we expect the above trends to differ depending upon the particle diameter, volumetric and mass fractions. The effect of SGS fluctuations on the particle dispersion and turbulence modulation is also being investigated. Other relevant statistics for the continuous and the dispersed phases are collected for the cases of one-way and two-way coupling. These statistics are compared to study the modulation of turbulence by the particles.

Vibro-acoustic performance of newly designed tram track structures

Science.gov (United States)

Haladin, Ivo; Lakušić, Stjepan; Ahac, Maja

2017-09-01

Rail vehicles in interaction with a railway structure induce vibrations that are propagating to surrounding structures and cause noise disturbance in the surrounding areas. Since tram tracks in urban areas often share the running surface with road vehicles one of top priorities is to achieve low maintenance and long lasting structure. Research conducted in scope of this paper gives an overview of newly designed tram track structures designated for use on Zagreb tram network and their performance in terms of noise and vibration mitigation. Research has been conducted on a 150 m long test section consisted of three tram track types: standard tram track structure commonly used on tram lines in Zagreb, optimized tram structure for better noise and vibration mitigation and a slab track with double sleepers embedded in a concrete slab, which presents an entirely new approach of tram track construction in Zagreb. Track has been instrumented with acceleration sensors, strain gauges and revision shafts for inspection. Relative deformations give an insight into track structure dynamic load distribution through the exploitation period. Further the paper describes vibro-acoustic measurements conducted at the test site. To evaluate the track performance from the vibro-acoustical standpoint, detailed analysis of track decay rate has been analysed. Opposed to measurement technique using impact hammer for track decay rate measurements, newly developed measuring technique using vehicle pass by vibrations as a source of excitation has been proposed and analysed. Paper gives overview of the method, it’s benefits compared to standard method of track decay rate measurements and method evaluation based on noise measurements of the vehicle pass by.

Microstructure and mechanical properties of newly developed aluminum–lithium alloy 2A97 welded by fiber laser

Energy Technology Data Exchange (ETDEWEB)

Fu, Banglong [Key Laboratory for Liquid–Solid Structural Evolution and Processing of Materials Ministry of Education, Shandong University, Jinan 250061 (China); Qin, Guoliang, E-mail: glqin@sdu.edu.cn [Key Laboratory for Liquid–Solid Structural Evolution and Processing of Materials Ministry of Education, Shandong University, Jinan 250061 (China); Meng, Xiangmeng; Ji, Yang; Zou, Yong [Key Laboratory for Liquid–Solid Structural Evolution and Processing of Materials Ministry of Education, Shandong University, Jinan 250061 (China); Lei, Zhen [Harbin Welding Institute, Harbin 150028 (China)

2014-11-03

The newly developed aluminum–lithium alloy 2A97 was for the first time joined by laser beam welding in order to meet the ever-increased long-term requirements of aerospace, aviation and armament industries. The weld appearance, microstructure, solute segregation, precipitate behavior, and their relationships with mechanical properties of welded joints were investigated. Sound joints with no crack and a few small porosities are obtained under appropriate heat inputs. As a result of heterogeneous nucleation involving the effect of Zr and Li, a non-dendritic equiaxed zone forms between partially melted zone and fusion zone. The crystal morphologies in fusion zone vary from columnar dendrite to equiaxed dendrite, with the increase of constitutional supercooling. Solute segregation leads to the variations of Cu content in grain interior and boundary, as well as the weak ability of re-precipitation of fusion zone. Most precipitates in the base metal dissolve during welding, and fusion zone contains a decreased quantity of δ′, β′, θ′, and T{sub 1}. The ultimate tensile strength of laser welded joints is 83.4% of that of the base metal, and can meet the application requirements from related industries, but the ductility still needs to be improved. Welding defects and loss of solid solution/precipitation hardened structure lead to the degradation of mechanical properties. Tensile fracture occurs in weld with the brittle intergranular dominated mode and premature failure occurs and extends in the equiaxed zone.

Patients newly diagnosed with clinical type 2 diabetes during oral glucocorticoid treatment and observed for 14 years: all-cause mortality and clinical developments

DEFF Research Database (Denmark)

Olivarius, Niels de Fine; Siersma, Volkert Dirk; Dyring-Andersen, B.

2011-01-01

and sex and to 1.39 (0.92-2.11, p = 0.12, n = 1086) when risk factors, complications and cancer were added to the model. Apart from differences in age and overweight, patients in this relatively small sample of those diagnosed with clinical type 2 diabetes during GC treatment were comparable at diagnosis...... treatment. A population-based sample of 1369 people newly diagnosed with clinical type 2 diabetes underwent a clinical examination at diagnosis, and surviving patients were followed up 6 and 14 years later. Patients receiving oral GC treatment at diagnosis were compared with the other patients. Of 1369......Chronic exposure to glucocorticoids (GCs) has many side effects including glucose intolerance and diabetes and may accelerate the occurrence of cardiovascular disease and increase mortality. We studied the 14-year clinical development of diabetes in patients diagnosed with diabetes during GC...

[Epidemiological characteristics of newly reported HIV infections in Chinese and Burmese residents, during 2012-2016 in Dehong Dai and Jingpo Autonomous Prefecture, Yunnan province].

Science.gov (United States)

Wang, J B; Chen, X C; Duan, X; Yang, J; Wang, Y K; Yang, T; Ye, R H; Yang, Y C; Yao, S T; Jiang, Y; Duan, S; He, N

2017-10-10

Objective: To understand the epidemiological characteristics of newly reported HIV infections in Chinese and Burmese residents during 2012-2016 in Dehong Dai and Jingpo Autonomous Prefecture of Yunnan province (Dehong) and to provide evidence for the development of related programs on prevention and control. Methods: All the HIV infections who were newly reported during 2012-2016 in Dehong, were recruited as the study subjects, with epidemiological characteristics of the cases analyzed by using the software SPSS 22.0. Results: A total of 5 692 HIV infections were newly reported between 2012 and 2016 (including 5 592 in this study), in which the Chinese patients accounted for 43.3 % (2 419) and the rest 56.7 % (3 173) were Burmese. Differences in age, gender and other social characteristics of these newly reported HIV infections were statistically significant between the Chinese and the Burmese (all p -values Chinese patients but through injecting drug use among the Burmese patients. Conclusions: Epidemiological characteristics of the newly reported HIV infections were different between the Chinese and the Burmese, between 2012 and 2016 in Dehong. Targeted prevention and control programs should be taken.

Demonstration of Coupled Tiamat Single Assembly Calculations

Energy Technology Data Exchange (ETDEWEB)

Novascone, Stephen R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hales, Jason D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gardner, Russell [Idaho National Lab. (INL), Idaho Falls, ID (United States); Pawlowski, R. P. P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Pastore, Giovanni [Idaho National Lab. (INL), Idaho Falls, ID (United States); Toth, Alex [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clarno, Kevin T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Collins, Benjamin S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Stimpson, Shane G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Powers, Jeffrey J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-06-01

This report corresponds to milestone L3:PHI.PCI.P15.03, which was originally intended to investigate the time discretization approaches with the newly developed fully coupled Tiamat capability, targeting single assembly problems.

Design and measurement of fully digital ternary content addressable memory using ratioless static random access memory cells and hierarchical-AND matching comparator

Science.gov (United States)

Nishikata, Daisuke; Ali, Mohammad Alimudin Bin Mohd; Hosoda, Kento; Matsumoto, Hiroshi; Nakamura, Kazuyuki

2018-04-01

A 36-bit × 32-entry fully digital ternary content addressable memory (TCAM) using the ratioless static random access memory (RL-SRAM) technology and fully complementary hierarchical-AND matching comparators (HAMCs) was developed. Since its fully complementary and digital operation enables the effect of device variabilities to be avoided, it can operate with a quite low supply voltage. A test chip incorporating a conventional TCAM and a proposed 24-transistor ratioless TCAM (RL-TCAM) cells and HAMCs was developed using a 0.18 µm CMOS process. The minimum operating voltage of 0.25 V of the developed RL-TCAM, which is less than half of that of the conventional TCAM, was measured via the conventional CMOS push–pull output buffers with the level-shifting and flipping technique using optimized pull-up voltage and resistors.

Hope, emotion regulation, and psychosocial well-being in patients newly diagnosed with cancer.

Science.gov (United States)

Peh, Chao Xu; Kua, Ee Heok; Mahendran, Rathi

2016-05-01

Patients newly diagnosed with cancer are often confronted with feelings of uncertainty and life threat. A significant proportion may report impairments in psychosocial well-being. Previous studies examining protective psychological factors such as hope and emotion regulation (ER) have yet to investigate these processes concurrently within a common self-regulation framework and/or focus on newly diagnosed patients. The present study aimed to examine how hope and ER may relate to psychosocial outcomes of patients newly diagnosed with cancer. The present study used a cross-sectional design with self-report questionnaires. Participants were newly diagnosed patients (N = 101) recruited from three cancer therapy clinics in a hospital. Patients completed measures of hope, ER (cognitive reappraisal and expressive suppression), and psychosocial well-being (life satisfaction and negative affectivity). Findings showed that (1) hope and reappraisal, but not suppression, were associated with well-being and (2) the interaction between hope and reappraisal was associated with well-being; reappraisal was not associated with well-being in high hope patients, while high reappraisal was associated with better well-being in low hope patients. Individual differences in hope and reappraisal appeared to be associated with psychosocial outcomes in newly diagnosed cancer patients. Hopeful thinking appeared to benefit patients' psychosocial well-being. In addition, an interaction effect between hope and reappraisal suggested that reappraisal as an ER strategy may be particularly adaptive for patients with low hope.

Combining Semi-Endogenous and Fully Endogenous Growth: a Generalization.

OpenAIRE

Cozzi, Guido

2017-01-01

This paper shows that combining the semi-endogenous and the fully endogenous growth mechanisms with a general CES aggregator, either growth process can prevail in the balanced growth path depending on their degree of complementarity/substitutability. Policy-induced long-run economic switches to the fully endogenous steady state as the R&D employment ratio surpasses a positive threshold are possible if the two growth engines are gross substitutes.

Assessing the comparative effectiveness of newly marketed medications: methodological challenges and implications for drug development.

Science.gov (United States)

Schneeweiss, S; Gagne, J J; Glynn, R J; Ruhl, M; Rassen, J A

2011-12-01

Comparative-effectiveness research (CER) aims to produce actionable evidence regarding the effectiveness and safety of medical products and interventions as they are used outside of controlled research settings. Although CER evidence regarding medications is particularly needed shortly after market approval, key methodological challenges include (i) potential bias due to channeling of patients to the newly marketed medication because of various patient-, physician-, and system-related factors; (ii) rapid changes in the characteristics of the user population during the early phase of marketing; and (iii) lack of timely data and the often small number of users in the first few months of marketing. We propose a mix of approaches to generate comparative-effectiveness data in the early marketing period, including sequential cohort monitoring with secondary health-care data and propensity score (PS) balancing, as well as extended follow-up of phase III and phase IV trials, indirect comparisons of placebo-controlled trials, and modeling and simulation of virtual trials.

Mentoring program for students newly enrolled in an Engineering Degree

Directory of Open Access Journals (Sweden)

Juan Pedro Peña-Martín

2016-10-01

Full Text Available This work presents a mentoring program for first year engineering students in the Telecommunications Engineering College (ETSIT at the University of Malaga (UMA. Actors involved in the program are professors from staff, veterans mentoring students and, of course, freshmen. All of them has been organized trough the Moodle based Virtual Learning Environment Platform of the UMA. The program has gone through several phases over three years. This paper shows the main objectives of this mentoring program, the initial design to get them where professors played mentor role, and successive changes made to try to improve the results, including the assumption of the mentor role by senior students (peer mentoring. The tools used for program evaluation are shown too. Despite the low participation, it has been a framework for the development of various educational and socializing activities (for mentors and mentees focused on developing generic competences. Furthermore, it has been a research tool to get a better understanding of problems affecting students newly enrolled.

Biomechanical Skin Property Evaluation for Wounds Treated With Synthetic and Biosynthetic Wound Dressings and a Newly Developed Collagen Matrix During Healing of Superficial Skin Defects in a Rat Models.

Science.gov (United States)

Held, Manuel; Engelke, Anne-Sophie; Tolzmann, Dascha Sophie; Rahmanian-Schwarz, Afshin; Schaller, Hans-Eberhard; Rothenberger, Jens

2016-09-01

There is a high prevalence of superficial wounds such as partial-thickness burns. Treatment of these wounds frequently includes temporary application of wound dressings. The aim of this study was to compare a newly developed collagen matrix with commonly used temporary skin dressings for treatment of partial-thickness skin defects. Through a skin dermatome, 42 standardized superficial skin defects were generated on the back of 28 adult male Lewis rats. The wounds were treated with a synthetic wound dressing (Suprathel, Polymedics Innovations Inc, Woodstock, GA) (n = 14), a biosynthetic skin dressing (Biobrane, Smith & Nephew, Hull, UK) (n = 14), or a newly developed bovine collagen matrix, Collagen Cell Carrier (Viscofan BioEngineering, Weinheim, Germany) (n = 14). Biomechanical properties of the skin were determined and compared every 10 days over a 3-month period of using the Cutometer MPA 580 (Courage + Khazaka Electronic GmbH, Cologne, Germany). As opposed to healthy skin, statistically significant differences were detected between days 10 and 30, and between days 60 and 80, for calculated elasticity (Ue), firmness of skin (R0), and overall elasticity (R8). After 3 months, no statistically significant differences in skin elasticity were detected between the different wound dressings. The presented results give an opportunity to compare the wound dressings used for treatment with respect to skin elasticity and reveal the potential of the bovine collagen matrix in the treatment of superficial skin defects; therefore the results facilitate further evaluation of collagen matrix in surgical applications and regenerative medicine.

Screw-System-Based Mobility Analysis of a Family of Fully Translational Parallel Manipulators

Directory of Open Access Journals (Sweden)

Ernesto Rodriguez-Leal

2013-01-01

Full Text Available This paper investigates the mobility of a family of fully translational parallel manipulators based on screw system analysis by identifying the common constraint and redundant constraints, providing a case study of this approach. The paper presents the branch motion-screws for the 3-RP̲C-Y parallel manipulator, the 3-RCC-Y (or 3-RP̲RC-Y parallel manipulator, and a newly proposed 3-RP̲C-T parallel manipulator. Then the paper determines the sets of platform constraint-screws for each of these three manipulators. The constraints exerted on the platforms of the 3-RP̲C architectures and the 3-RCC-Y manipulators are analyzed using the screw system approach and have been identified as couples. A similarity has been identified with the axes of couples: they are perpendicular to the R joint axes, but in the former the axes are coplanar with the base and in the latter the axes are perpendicular to the limb. The remaining couples act about the axis that is normal to the base. The motion-screw system and constraint-screw system analysis leads to the insightful understanding of the mobility of the platform that is then obtained by determining the reciprocal screws to the platform constraint screw sets, resulting in three independent instantaneous translational degrees-of-freedom. To validate the mobility analysis of the three parallel manipulators, the paper includes motion simulations which use a commercially available kinematics software.

GABA regulates synaptic integration of newly generated neurons in the adult brain

Science.gov (United States)

Ge, Shaoyu; Goh, Eyleen L. K.; Sailor, Kurt A.; Kitabatake, Yasuji; Ming, Guo-Li; Song, Hongjun

2006-02-01

Adult neurogenesis, the birth and integration of new neurons from adult neural stem cells, is a striking form of structural plasticity and highlights the regenerative capacity of the adult mammalian brain. Accumulating evidence suggests that neuronal activity regulates adult neurogenesis and that new neurons contribute to specific brain functions. The mechanism that regulates the integration of newly generated neurons into the pre-existing functional circuitry in the adult brain is unknown. Here we show that newborn granule cells in the dentate gyrus of the adult hippocampus are tonically activated by ambient GABA (γ-aminobutyric acid) before being sequentially innervated by GABA- and glutamate-mediated synaptic inputs. GABA, the major inhibitory neurotransmitter in the adult brain, initially exerts an excitatory action on newborn neurons owing to their high cytoplasmic chloride ion content. Conversion of GABA-induced depolarization (excitation) into hyperpolarization (inhibition) in newborn neurons leads to marked defects in their synapse formation and dendritic development in vivo. Our study identifies an essential role for GABA in the synaptic integration of newly generated neurons in the adult brain, and suggests an unexpected mechanism for activity-dependent regulation of adult neurogenesis, in which newborn neurons may sense neuronal network activity through tonic and phasic GABA activation.

Top Information Need Priorities of Older Adults Newly Diagnosed With Active Myeloma.

Science.gov (United States)

Tariman, Joseph D; Doorenbos, Ardith; Schepp, Karen G; Singhal, Seema; Berry, Donna L

2015-01-01

Prioritizing patients' information needs maximizes efficiency. This study examined the information sources and priorities in a sample of older adults newly diagnosed with symptomatic myeloma requiring immediate therapy. An association analysis of whether information needs were influenced by sociodemographic variables such as age, gender, education, marital status, and income was also conducted. The Information Needs Questionnaire (INQ) and an investigator-developed interview schedule were administered to 20 older adults diagnosed with symptomatic myeloma during a 30- to 45-minute semistructured interview. We found that older adults newly diagnosed with symptomatic myeloma have different priorities of information needs when compared with younger patients diagnosed with various types of cancer. The top three priorities related to treatment, prognosis, and self-care. Sociodemographic variables did not influence the priorities of information needs among older adults with symptomatic myeloma. The Internet, physicians, family, and friends were among the top sources of information. Advanced practitioners in oncology should support and identify interventions that can enhance patients' learning process from these sources. Well poised to assist patients in searching credible and reliable Internet sources, advanced practitioners in oncology can provide patient education about different treatments and the impact of such treatments on prognosis (e.g., overall survival and likelihood of cure).

Big earth-observation data analytics for modelling pan-tropical land-use change trajectories for newly deforested areas

Science.gov (United States)

Coca Castro, Alejandro; Reymondin, Louis; Rebetez, Julien; Fabio Satizabal Mejia, Hector; Perez-Uribe, Andres; Mulligan, Mark; Smith, Thomas; Hyman, Glenn

2017-04-01

Global land use monitoring is important to the the Sustainable Development Goals (SDGs). The latest advances in storage and manipulation of big earth-observation data have been key to developing multiple operational forest monitoring initiatives such as FORMA, Terra-i and Global Forest Change. Although the data provided by these systems are useful for identifying and estimating newly deforested areas (from 2000), they do not provide details about the land use to which these deforested areas are transitioned. This information is critical to understand the biodiversity and ecosystem services impact of deforestation and the resulting impacts on human wellbeing, locally and downstream. With the aim of contributing to current forest monitoring initiatives, this research presents a set of experimental case studies in Latin America which integrate existing land-change information derived from remote sensing image and aerial photography/ground datasets, high-temporal resolution MODIS data, advanced machine learning (i.e deep learning) and big data technologies (i.e. Hadoop and Spark) to assess land-use change trajectories in newly deforested areas in near real time.

Protogalaxy interactions in newly formed clusters: Galaxy luminosities, colors, and intergalactic gas

International Nuclear Information System (INIS)

Silk, J.

1978-01-01

The role of protogalaxy interactions in galactic evolution is studied during the formation of galaxy clusters. In the early stages of the collapse, coalescent encounters of protogalaxies lead to the development of a galactic luminosity function. Once galaxies acquire appreciable random motions, mutual collisions between galaxies in rich clusters will trigger the collapse of interstellar clouds to form stars. This provides both a source for enriched intracluster gas and an interpretation of the correlation between luminosity and color for cluster elliptical galaxies. Other observational consequences that are considered include optical, X-ray, and diffuse nonthermal radio emission from newly formed clusters of galaxies

Best management practices for newly weaned calves for improved health and well-being.

Science.gov (United States)

Wilson, B K; Richards, C J; Step, D L; Krehbiel, C R

2017-05-01

Morbidity and mortality in newly weaned calves resulting from bovine respiratory disease (BRD) continue to be the most significant problems facing the beef industry. Morbidity attributed to BRD accounts for approximately 75% of total feedlot morbidity. Several experiments have documented the economic impacts of BRD. Direct costs attributable to BRD include death loss, treatment and labor costs, and prevention costs, while indirect costs associated with BRD include decreased growth performance and feed efficiency, increased days on feed, and decreased carcass merit and market value. In recent years, cattle treated for BRD have returned $50 to $250 less per head at harvest than cattle never treated for BRD. Best management practices for newly weaned calves vary depending on a multitude of factors including: season of year calves are purchased, calf genetics, length of time in the marketing and transport channels, previous management and vaccination programs, and other factors. In general, calves purchased directly from a ranch have fewer health problems than calves purchased through auction markets. The longer a calf is in the marketing chain, the more likely health problems will be encountered. Calves that have spent several days in the marketing chain may develop clinical BRD before or very soon after arrival, whereas cattle with less time in the marketing chain may get sick later (2 to 4 wk), due to the length of time it takes for BRD to develop. On or before arrival, calves should be given a risk score (high, medium, or low) that relates to the quantity and magnitude of stress they have encountered and the probability they will develop BRD. High-risk calves typically will have been recently weaned, received no vaccinations, not been castrated or dehorned, been commingled, and moved through an auction market. Low-risk calves will often originate from a single source and will have gone through a preconditioning program that includes vaccination, castration

Linear Approach for Synchronous State Stability in Fully Connected PLL Networks

Directory of Open Access Journals (Sweden)

José R. C. Piqueira

2008-01-01

Full Text Available Synchronization is an essential feature for the use of digital systems in telecommunication networks, integrated circuits, and manufacturing automation. Formerly, master-slave (MS architectures, with precise master clock generators sending signals to phase-locked loops (PLLs working as slave oscillators, were considered the best solution. Nowadays, the development of wireless networks with dynamical connectivity and the increase of the size and the operation frequency of integrated circuits suggest that the distribution of clock signals could be more efficient if distributed solutions with fully connected oscillators are used. Here, fully connected networks with second-order PLLs as nodes are considered. In previous work, how the synchronous state frequency for this type of network depends on the node parameters and delays was studied and an expression for the long-term frequency was derived (Piqueira, 2006. Here, by taking the first term of the Taylor series expansion for the dynamical system description, it is shown that for a generic network with N nodes, the synchronous state is locally asymptotically stable.

DISABILITIES OF HANDS, FEET AND EYES IN NEWLY-DIAGNOSED LEPROSY PATIENTS IN EASTERN NEPAL

NARCIS (Netherlands)

SCHIPPER, A; LUBBERS, WJ; HOGEWEG, M; DESOLDENHOFF, R

The objective of the study was to determine the magnitude of hand/feet/eye disabilities in newly diagnosed leprosy patients by examining all newly diagnosed leprosy patients who presented at the Eastern Leprosy Control Project (supported by The Netherlands Leprosy Relief Association), made up of a

Motion compensation for fully 4D PET reconstruction using PET superset data

Energy Technology Data Exchange (ETDEWEB)

Verhaeghe, J; Gravel, P; Mio, R; Fukasawa, R; Rosa-Neto, P; Soucy, J-P; Thompson, C J; Reader, A J, E-mail: jeroen.verhaeghe@mcgill.c [Montreal Neurological Institute, McGill University, Montreal (Canada)

2010-07-21

Fully 4D PET image reconstruction is receiving increasing research interest due to its ability to significantly reduce spatiotemporal noise in dynamic PET imaging. However, thus far in the literature, the important issue of correcting for subject head motion has not been considered. Specifically, as a direct consequence of using temporally extensive basis functions, a single instance of movement propagates to impair the reconstruction of multiple time frames, even if no further movement occurs in those frames. Existing 3D motion compensation strategies have not yet been adapted to 4D reconstruction, and as such the benefits of 4D algorithms have not yet been reaped in a clinical setting where head movement undoubtedly occurs. This work addresses this need, developing a motion compensation method suitable for fully 4D reconstruction methods which exploits an optical tracking system to measure the head motion along with PET superset data to store the motion compensated data. List-mode events are histogrammed as PET superset data according to the measured motion, and a specially devised normalization scheme for motion compensated reconstruction from the superset data is required. This work proceeds to propose the corresponding time-dependent normalization modifications which are required for a major class of fully 4D image reconstruction algorithms (those which use linear combinations of temporal basis functions). Using realistically simulated as well as real high-resolution PET data from the HRRT, we demonstrate both the detrimental impact of subject head motion in fully 4D PET reconstruction and the efficacy of our proposed modifications to 4D algorithms. Benefits are shown both for the individual PET image frames as well as for parametric images of tracer uptake and volume of distribution for {sup 18}F-FDG obtained from Patlak analysis.

Antipsychotic medications and dental caries in newly diagnosed schizophrenia: A nationwide cohort study.

Science.gov (United States)

Hu, Kai-Fang; Chou, Yu-Hsiang; Wen, Yen-Hsia; Hsieh, Kun-Pin; Tsai, Jui-Hsiu; Yang, Pinchen; Yang, Yi-Hsin; Lin, Chun-Hung Richard

2016-11-30

We investigated the association between antipsychotic medications and the risk of dental caries in patients with schizophrenia. We enroled a nationwide cohort of patients with newly diagnosed schizophrenia within 1 year of dental caries development. Exposure to antipsychotics and other medications was categorised according to their type and duration, and the association between exposure and dental caries was assessed through logistic regressions. Of the 3610 patients with newly diagnosed schizophrenia, 2149 (59.5%) exhibited an incidence of treated dental caries. Logistic regression analysis identified a younger age, female sex, high income, a 2-year history of dental caries, and exposure to first-generation antipsychotics, and antihypertensives as independent risk factors for treated dental caries in patients with schizophrenia. Hyposalivation, the adverse effect of first-generation antipsychotics and antihypertensives, was associated with an increased risk of treated dental caries. However, hypersalivation from first-generation antipsychotics for dental caries was associated with a protective factor. These findings suggest that clinicians should pay attention to the aforementioned risk factors for dental caries in patients with schizophrenia, particularly while prescribing first-generation antipsychotics and antihypertensives to such patients. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Axiomatisation of fully probabilistic design

Czech Academy of Sciences Publication Activity Database

Kárný, Miroslav; Kroupa, Tomáš

2012-01-01

Roč. 186, č. 1 (2012), s. 105-113 ISSN 0020-0255 R&D Projects: GA MŠk(CZ) 2C06001; GA ČR GA102/08/0567 Institutional research plan: CEZ:AV0Z10750506 Keywords : Bayesian decision making * Fully probabilistic design * Kullback–Leibler divergence * Unified decision making Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 3.643, year: 2012 http://library.utia.cas.cz/separaty/2011/AS/karny-0367271.pdf

Delivering the diabetes education and self management for ongoing and newly diagnosed (DESMOND) programme for people with newly diagnosed type 2 diabetes

DEFF Research Database (Denmark)

Gillett, M.; Dallosso, H. M.; Dixon, S.

2010-01-01

intervention is £82 (-£831 to £1010) and the mean incremental cost per QALY gained is £2092. A probabilistic sensitivity analysis indicated that the likelihood that the DESMOND programme is cost effective at a threshold of £20 000 per QALY is 66% using trial based intervention costs and 70% using "real world......Objectives: To assess the long term clinical and cost effectiveness of the diabetes education and self management for ongoing and newly diagnosed (DESMOND) intervention compared with usual care in people with newly diagnosed type 2 diabetes. Design: We undertook a cost-utility analysis that used...... data from a 12 month, multicentre, cluster randomised controlled trial and, using the Sheffield type 2 diabetes model, modelled long term outcomes in terms of use of therapies, incidence of complications, mortality, and associated effect on costs and health related quality of life. A further cost...

Design Study of Fully Superconducting Wind Turbine Generators

DEFF Research Database (Denmark)

Song, Xiaowei (Andy); Mijatovic, Nenad; Jensen, Bogi Bech

2015-01-01

In this paper, two fully superconducting generators employing MgB2 armature winding, with YBCO and MgB2 field winding respectively, are presented and analyzed. The ac loss in armature winding is estimated, and a simple comparative study is carried out. The results show that both electromagnetic...... designs for fully superconducting generators are promising with respect to the power density. However, the cost of removing ac loss in armature winding is as high as $900 000. It is also noted that with the current price of YBCO tape, the generator employing MgB 2 field winding would have lower cost....

Load-Bearing Capacity and Retention of Newly Developed Micro-Locking Implant Prosthetic System: An In Vitro Pilot Study

Directory of Open Access Journals (Sweden)

Jae-Won Choi

2018-04-01

Full Text Available The aim of this study was to introduce the newly developed micro-locking implant prosthetic system and to evaluate the resulting its characteristics. To evaluate load-bearing capacity, 25 implants were divided into five groups: external-hexagon connection (EH, internal-octagon connection (IO, internal-hexagon connection (IH, one-body implant (OB, micro-locking implant system (ML. The maximum compressive load was measured using a universal testing machine (UTM according to the ISO 14801. Retention was evaluated in two experiments: (1 a tensile test of the structure modifications of the components (attachment and implant and (2 a tensile test after cyclic loading (total 5,000,000 cycles, 100 N, 2 Hz. The load-bearing capacity of the ML group was not significantly different from the other groups (p > 0.05. The number of balls in the attachment and the presence of a hexagonal receptacle did not show a significant correlation with retention (p > 0.05, but the shape of the retentive groove in the implant post had a statistically significant effect on retention (p < 0.05. On the other hand, the retention loss was observed during the initial 1,000,000 cycles, but an overall constant retention was maintained afterward. Various preclinical studies on this novel micro-locking implant prosthetic system should continue so that it can be applied in clinical practice.

Simulations of fully deformed oscillating flux tubes

Science.gov (United States)

Karampelas, K.; Van Doorsselaere, T.

2018-02-01

Context. In recent years, a number of numerical studies have been focusing on the significance of the Kelvin-Helmholtz instability in the dynamics of oscillating coronal loops. This process enhances the transfer of energy into smaller scales, and has been connected with heating of coronal loops, when dissipation mechanisms, such as resistivity, are considered. However, the turbulent layer is expected near the outer regions of the loops. Therefore, the effects of wave heating are expected to be confined to the loop's external layers, leaving their denser inner parts without a heating mechanism. Aim. In the current work we aim to study the spatial evolution of wave heating effects from a footpoint driven standing kink wave in a coronal loop. Methods: Using the MPI-AMRVAC code, we performed ideal, three dimensional magnetohydrodynamic simulations of footpoint driven transverse oscillations of a cold, straight coronal flux tube, embedded in a hotter environment. We have also constructed forward models for our simulation using the FoMo code. Results: The developed transverse wave induced Kelvin-Helmholtz (TWIKH) rolls expand throughout the tube cross-section, and cover it entirely. This turbulence significantly alters the initial density profile, leading to a fully deformed cross section. As a consequence, the resistive and viscous heating rate both increase over the entire loop cross section. The resistive heating rate takes its maximum values near the footpoints, while the viscous heating rate at the apex. Conclusions: We conclude that even a monoperiodic driver can spread wave heating over the whole loop cross section, potentially providing a heating source in the inner loop region. Despite the loop's fully deformed structure, forward modelling still shows the structure appearing as a loop. A movie attached to Fig. 1 is available at http://https://www.aanda.org

A fully relativistic approach for calculating atomic data for highly charged ions

Energy Technology Data Exchange (ETDEWEB)

Zhang, Hong Lin [Los Alamos National Laboratory; Fontes, Christopher J [Los Alamos National Laboratory; Sampson, Douglas H [PENNSYLVANIA STATE UNIV

2009-01-01

We present a review of our fully relativistic approach to calculating atomic data for highly charged ions, highlighting a research effort that spans twenty years. Detailed discussions of both theoretical and numerical techniques are provided. Our basic approach is expected to provide accurate results for ions that range from approximately half ionized to fully stripped. Options for improving the accuracy and range of validity of this approach are also discussed. In developing numerical methods for calculating data within this framework, considerable emphasis is placed on techniques that are robust and efficient. A variety of fundamental processes are considered including: photoexcitation, electron-impact excitation, electron-impact ionization, autoionization, electron capture, photoionization and photorecombination. Resonance contributions to a variety of these processes are also considered, including discussions of autoionization, electron capture and dielectronic recombination. Ample numerical examples are provided in order to illustrate the approach and to demonstrate its usefulness in providing data for large-scale plasma modeling.

MODELING THE RISE OF FIBRIL MAGNETIC FIELDS IN FULLY CONVECTIVE STARS

Energy Technology Data Exchange (ETDEWEB)

Weber, Maria A.; Browning, Matthew K., E-mail: mweber@astro.ex.ac.uk [Department of Physics and Astronomy, University of Exeter, Stocker Road, EX4 4QL Exeter (United Kingdom)

2016-08-20

Many fully convective stars exhibit a wide variety of surface magnetism, including starspots and chromospheric activity. The manner by which bundles of magnetic field traverse portions of the convection zone to emerge at the stellar surface is not especially well understood. In the solar context, some insight into this process has been gleaned by regarding the magnetism as consisting partly of idealized thin flux tubes (TFTs). Here we present the results of a large set of TFT simulations in a rotating spherical domain of convective flows representative of a 0.3 M {sub ⊙} main-sequence star. This is the first study to investigate how individual flux tubes in such a star might rise under the combined influence of buoyancy, convection, and differential rotation. A time-dependent hydrodynamic convective flow field, taken from separate 3D simulations calculated with the anelastic equations, impacts the flux tube as it rises. Convective motions modulate the shape of the initially buoyant flux ring, promoting localized rising loops. Flux tubes in fully convective stars have a tendency to rise nearly parallel to the rotation axis. However, the presence of strong differential rotation allows some initially low-latitude flux tubes of moderate strength to develop rising loops that emerge in the near-equatorial region. Magnetic pumping suppresses the global rise of the flux tube most efficiently in the deeper interior and at lower latitudes. The results of these simulations aim to provide a link between dynamo-generated magnetic fields, fluid motions, and observations of starspots for fully convective stars.

Tolerance, immunocompetence, and secondary disease in fully allogeneic radiation chimeras

International Nuclear Information System (INIS)

Rayfield, L.S.; Brent, L.

1983-01-01

The aim of this study was to ascertain the extent to which secondary disease and mortality in fully allogeneic chimeras (C57BL leads to CBA) is caused (if at all) by a delayed graft-versus-host reaction. Adult CBA males were thymectomized, irradiated, and reconstituted with T-lymphocyte-depleted C57BL or CBA bone marrow cells (BMC), followed three weeks after irradiation by implantation under the kidney capsule of thymic lobes from C57BL or CBA fetal or adult donors. These mice were observed for the development of secondary disease for periods in excess of 250 days, and they were examined at 5 weeks or 4 months for T lymphocyte reactivity and tolerance to alloantigens, using the cell-mediated lympholysis assay (CML). The following results were obtained. First, removal of T lymphocytes with anti-Thy 1 antibody and complement from allogeneic bone marrow did not prevent wasting and eventual death, although it prolonged the lifespan of mice substantially. Second, T lymphocytes generated from bone marrow-derived precursor cells became tolerant of the histocompatibility antigens of the thymus donor strain but remained normally reactive to third-party antigens. Third, allogeneic radiation chimeras did not survive as well as animals reconstituted with syngeneic cells, even when they were demonstrably tolerant in CML. Fourth, C57BL BMC maturing in a CBA host equipped with a C57BL thymus graft did not become tolerant of host antigens, indicating that extra-thymic tolerance does not occur in fully allogeneic--as opposed to semiallogeneic--chimeras. It is argued that the function of B lymphocytes and/or accessory cells is impaired in fully allogeneic radiation chimeras, and that the mortality observed was directly related to the resulting immunodeficiency. The relevance of the results described in this paper to clinical bone marrow transplantation is discussed

The 5D Fully-Covariant Theory of Gravitation and Its Astrophysical Applications

Directory of Open Access Journals (Sweden)

Tianxi Zhang

2014-12-01

Full Text Available In this paper, we comprehensively review the five-dimensional (5D fully-covariant theory of gravitation developed by Zhang two decades ago and its recent applications in astrophysics and cosmology. This 5D gravity describes not only the fields, but also the matter and its motion in a 5D spacetime. The greatest advantage of this theory is that there does not exist any unknown parameter, so that we can apply it to explain astrophysical and cosmological issues by quantitatively comparing the results obtained from it with observations and to predict new effects that could not be derived from any other gravitational theories. First, the 5D covariant description of matter and its motion enabled Zhang to analytically derive the fifteenth component of the 5D energy-momentum tensor of matter ( T - 44 , which significantly distinguishes this 5D gravity from other 5D gravitational theories that usually assumed a T - 44 with an unknown parameter, called the scalar charge s, and, thus, to split the 5D covariant field equation into (4 + 1 splitting form as the gravitational, electromagnetic, and scalar field equations. The gravitational field equation turns into the 4D Einstein’s field equation of general relativity if the scalar field is equal to unity. Then, Zhang solved the field equations and obtained an exact static spherically-symmetric external solution of the gravitational, electromagnetic and scalar fields, in which all integral constants were completely determined with a perfect set of simple numbers and parameters that only depend on the mass and electric charge of the matter, by comparing with the obtained weak internal solution of the fields at a large radial distance. In the Einstein frame, the exact field solution obtained from the 5D fully-covariant theory of gravitation reduces to the Schwarzschild solution when the matter is electrically neutral and the fields are weak in strength. This guarantees that the four fundamental tests (light

Exploring selection and recruitment processes for newly qualified nurses: a sequential-explanatory mixed-method study.

Science.gov (United States)

Newton, Paul; Chandler, Val; Morris-Thomson, Trish; Sayer, Jane; Burke, Linda

2015-01-01

To map current selection and recruitment processes for newly qualified nurses and to explore the advantages and limitations of current selection and recruitment processes. The need to improve current selection and recruitment practices for newly qualified nurses is highlighted in health policy internationally. A cross-sectional, sequential-explanatory mixed-method design with 4 components: (1) Literature review of selection and recruitment of newly qualified nurses; and (2) Literature review of a public sector professions' selection and recruitment processes; (3) Survey mapping existing selection and recruitment processes for newly qualified nurses; and (4) Qualitative study about recruiters' selection and recruitment processes. Literature searches on the selection and recruitment of newly qualified candidates in teaching and nursing (2005-2013) were conducted. Cross-sectional, mixed-method data were collected from thirty-one (n = 31) individuals in health providers in London who had responsibility for the selection and recruitment of newly qualified nurses using a survey instrument. Of these providers who took part, six (n = 6) purposively selected to be interviewed qualitatively. Issues of supply and demand in the workforce, rather than selection and recruitment tools, predominated in the literature reviews. Examples of tools to measure values, attitudes and skills were found in the nursing literature. The mapping exercise found that providers used many selection and recruitment tools, some providers combined tools to streamline process and assure quality of candidates. Most providers had processes which addressed the issue of quality in the selection and recruitment of newly qualified nurses. The 'assessment centre model', which providers were adopting, allowed for multiple levels of assessment and streamlined recruitment. There is a need to validate the efficacy of the selection tools. © 2014 John Wiley & Sons Ltd.

Fully probabilistic design: the way for optimizing of concrete structures

Directory of Open Access Journals (Sweden)

I. Laníková

Full Text Available Some standards for the design of concrete structures (e.g. EC2 and the original ČSN 73 1201-86 allow a structure to be designed by several methods. This contribution documents the fact that even if a structure does not comply with the partial reliability factor method, according to EC2, it can satisfy the conditions during the application of the fully probabilistic approach when using the same standard. From an example of the reliability of a prestressed spun concrete pole designed by the partial factor method and fully probabilistic approach according to the Eurocode it is evident that an expert should apply a more precise (though unfortunately more complicated method in the limiting cases. The Monte Carlo method, modified by the Latin Hypercube Sampling (LHS method, has been used for the calculation of reliability. Ultimate and serviceability limit states were checked for the partial factor method and fully probabilistic design. As a result of fully probabilistic design it is possible to obtain a more efficient design for a structure.

Newly-formed emotional memories guide selective attention processes: Evidence from event-related potentials

OpenAIRE

Harald T. Schupp; Ursula Kirmse; Ralf Schmälzle; Tobias Flaisch; Britta Renner

2016-01-01

Emotional cues can guide selective attention processes. However, emotional stimuli can both activate long-term memory representations reflecting general world knowledge and engage newly formed memory representations representing specific knowledge from the immediate past. Here, the self-completion feature of associative memory was utilized to assess the regulation of attention processes by newly-formed emotional memory. First, new memory representations were formed by presenting pictures depi...

Faster Fully-Dynamic minimum spanning forest

DEFF Research Database (Denmark)

Holm, Jacob; Rotenberg, Eva; Wulff-Nilsen, Christian

2015-01-01

We give a new data structure for the fully-dynamic minimum spanning forest problem in simple graphs. Edge updates are supported in O(log4 n/log logn) expected amortized time per operation, improving the O(log4 n) amortized bound of Holm et al. (STOC’98, JACM’01).We also provide a deterministic data...

Newly developed surface coil for endoluminal MRI, depiction of pig gastric wall layers and vascular architecture in ex vivo study.

Science.gov (United States)

Morita, Yoshinori; Kutsumi, Hiromu; Yoshinaka, Hayato; Matsuoka, Yuichiro; Kuroda, Kagayaki; Gotanda, Masakazu; Sekino, Naomi; Kumamoto, Etsuko; Yoshida, Masaru; Inokuchi, Hideto; Azuma, Takeshi

2009-01-01

The purpose of this study was to visualize the gastric wall layers and to depict the vascular architecture in vitro by using resected porcine stomachs studied with high-spatial resolution magnetic resonance (MR) imaging. Normal dissected porcine stomach samples (n = 4) were examined with a 3 Tesla MR system using a newly developed surface coil. MR images were obtained by the surface coil as receiver and a head coil as transmitter. High-spatial-resolution spin-echo MR images were obtained with a field of view of 8 x 8 cm, a matrix of 256 x 128 and slice thicknesses of 3 and 5 mm. T1 and T2-weighted MR images clearly depicted the normal porcine gastric walls as consisting of four distinct layers. In addition, vascular architectures in proper muscle layers were also visualized, which were confirmed by histological examinations to correspond to blood vessels. High-spatial-resolution MR imaging using a surface coil placed closely to the gastric wall enabled the differentiation of porcine gastric wall layers and the depiction of the blood vessels in proper muscle layer in this experimental study.

Newly developed surface coil for endoluminal MRI, depiction of pig gastric wall layers and vascular architecture in ex vivo study

International Nuclear Information System (INIS)

Morita, Yoshinori; Kutsumi, Hiromu; Yoshinaka, Hayato

2009-01-01

The purpose of this study was to visualize the gastric wall layers and to depict the vascular architecture in vitro by using resected porcine stomachs studied with high-spatial resolution magnetic resonance (MR) imaging. Normal dissected porcine stomach samples (n=4) were examined with a 3 Tesla MR system using a newly developed surface coil. MR images were obtained by the surface coil as receiver and a head coil as transmitter. High-spatial-resolution spin-echo MR images were obtained with a field of view of 8 x 8 cm, a matrix of 256 x 128 and slice thicknesses of 3 and 5 mm. T1 and T2-weighted MR images clearly depicted the normal porcine gastric walls as consisting of four distinct layers. In addition, vascular architectures in proper muscle layers were also visualized, which were confirmed by histological examinations to correspond to blood vessels. High-spatial-resolution MR imaging using a surface coil placed closely to the gastric wall enabled the differentiation of porcine gastric wall layers and the depiction of the blood vessels in proper muscle layer in this experimental study. (author)

Study on time properties of newly type inorganic scintillator cerium fluoride (CeF3)

International Nuclear Information System (INIS)

Hu Mengchun; Zhou Dianzhong; Guo Cun; Ye Wenying

2003-01-01

CeF 3 is a newly fast time response inorganic scintillator, the time characteristics of which, developed in recent country in nearly year were studied in our works. The time characteristics are rise time, FWHM time and fall time for fast pulse radiation source. As the same time, authors have calculated and used the formula of pulse method gain to the decay time constant of crystal shining, the decay time constant measured is the same to the results of foreign references

Fully 3D GPU PET reconstruction

Energy Technology Data Exchange (ETDEWEB)

Herraiz, J.L., E-mail: joaquin@nuclear.fis.ucm.es [Grupo de Fisica Nuclear, Departmento Fisica Atomica, Molecular y Nuclear, Universidad Complutense de Madrid (Spain); Espana, S. [Department of Radiation Oncology, Massachusetts General Hospital and Harvard Medical School, Boston, MA (United States); Cal-Gonzalez, J. [Grupo de Fisica Nuclear, Departmento Fisica Atomica, Molecular y Nuclear, Universidad Complutense de Madrid (Spain); Vaquero, J.J. [Departmento de Bioingenieria e Ingenieria Espacial, Universidad Carlos III, Madrid (Spain); Desco, M. [Departmento de Bioingenieria e Ingenieria Espacial, Universidad Carlos III, Madrid (Spain); Unidad de Medicina y Cirugia Experimental, Hospital General Universitario Gregorio Maranon, Madrid (Spain); Udias, J.M. [Grupo de Fisica Nuclear, Departmento Fisica Atomica, Molecular y Nuclear, Universidad Complutense de Madrid (Spain)

2011-08-21

Fully 3D iterative tomographic image reconstruction is computationally very demanding. Graphics Processing Unit (GPU) has been proposed for many years as potential accelerators in complex scientific problems, but it has not been used until the recent advances in the programmability of GPUs that the best available reconstruction codes have started to be implemented to be run on GPUs. This work presents a GPU-based fully 3D PET iterative reconstruction software. This new code may reconstruct sinogram data from several commercially available PET scanners. The most important and time-consuming parts of the code, the forward and backward projection operations, are based on an accurate model of the scanner obtained with the Monte Carlo code PeneloPET and they have been massively parallelized on the GPU. For the PET scanners considered, the GPU-based code is more than 70 times faster than a similar code running on a single core of a fast CPU, obtaining in both cases the same images. The code has been designed to be easily adapted to reconstruct sinograms from any other PET scanner, including scanner prototypes.

Fully 3D GPU PET reconstruction

International Nuclear Information System (INIS)

Herraiz, J.L.; Espana, S.; Cal-Gonzalez, J.; Vaquero, J.J.; Desco, M.; Udias, J.M.

2011-01-01

Fully 3D iterative tomographic image reconstruction is computationally very demanding. Graphics Processing Unit (GPU) has been proposed for many years as potential accelerators in complex scientific problems, but it has not been used until the recent advances in the programmability of GPUs that the best available reconstruction codes have started to be implemented to be run on GPUs. This work presents a GPU-based fully 3D PET iterative reconstruction software. This new code may reconstruct sinogram data from several commercially available PET scanners. The most important and time-consuming parts of the code, the forward and backward projection operations, are based on an accurate model of the scanner obtained with the Monte Carlo code PeneloPET and they have been massively parallelized on the GPU. For the PET scanners considered, the GPU-based code is more than 70 times faster than a similar code running on a single core of a fast CPU, obtaining in both cases the same images. The code has been designed to be easily adapted to reconstruct sinograms from any other PET scanner, including scanner prototypes.

One Quarter of California’s Teachers for English Learners Not Fully Certified

OpenAIRE

Rumberger, Russell W.

2003-01-01

Although the passage of Proposition 227 reduced the demand for bilingual teachers, an acute shortage of teachers qualified to deliver needed instructional services to English learners remains. In 1998, prior to the passage of 227, 43 percent of the teachers providing instructional services to English learners were not fully certified to provide those services—33 percent of teachers were in training to provide English language development (ELD) or Specially Designed Academic Instruction in Eng...

Identification of oligo-N-glycolylneuraminic acid residues in mammal-derived glycoproteins by a newly developed immunochemical reagent and biochemical methods.

Science.gov (United States)

Sato, C; Kitajima, K; Inoue, S; Inoue, Y

1998-01-30

The occurrence of the alpha2-->8-linked oligomeric form of N-glycolylneuraminic acid (oligo-Neu5Gc) residues in mammalian glycoproteins was unequivocally demonstrated using a newly developed anti-oligo/poly-Neu5Gc monoclonal antibody as well as by chemical and biochemical methods. First, the antibody, designated mAb.2-4B, which specifically recognized oligo/poly-Neu5Gc with a degree of polymerization of >2, was developed by establishing a hybridoma cell line from P3U1 myeloma cells fused with splenocytes from an MRL autoimmune mouse immunized with dipalmitoylphosphatidylethanolamine-conjugated oligo/poly-Neu5Gc. Second, oligo-Neu5Gc was shown to occur in glycoproteins derived from pig spleen by Western blot analysis using mAb.2-4B, which was also confirmed by fluorometric high performance liquid chromatographic analysis of the product of periodate oxidation/reduction/acid hydrolysis of the purified glycopeptide fractions and by TLC and 600-MHz 1H NMR spectroscopic analysis of their mild acid hydrolysates. Finally, the ubiquitous occurrence of oligo-Neu5Gc chains as glycoproteinaceous components in Wistar rat tissue was immunochemically indicated. This is the first example demonstrating the diversity in oligo/poly-Sia structure in mammalian glycoproteins, where only poly-N-acetylneuraminic acid is known to occur. Such diversity in oligo/poly-Sia structure also implicates a diverged array of biological functions of this glycan unit in glycoproteins.

Association of copeptin and cortisol in newly diagnosed multiple sclerosis patients.

Science.gov (United States)

Baranowska-Bik, Agnieszka; Kochanowski, Jan; Uchman, Dorota; Litwiniuk, Anna; Kalisz, Malgorzata; Martynska, Lidia; Wolinska-Witort, Ewa; Baranowska, Boguslawa; Bik, Wojciech

2015-05-15

Multiple sclerosis (MS) is a chronic autoimmune disease of the central nervous system. Obesity may increase the risk of developing MS. The aim of this study was to evaluate copeptin and cortisol plasma levels in newly diagnosed untreated MS patients and to determine whether copeptin and cortisol are related to the patients' clinical statuses. We report that copeptin and cortisol were higher in overweight/obese MS patients. Positive correlations were observed between the two parameters. We conclude that alterations of copeptin and cortisol levels in multiple sclerosis patients may be related to adiposity. An increase in cortisol may also be associated with copeptin secretion. Copyright © 2015 Elsevier B.V. All rights reserved.

Fully coupled fluid-structure interaction model of reed valves in a multi-cylinder reciprocating piston compressor

Science.gov (United States)

Xie, F.; Nieter, J.; Lifson, A.; Reba, R.; Sishtla, V.

2017-08-01

For years compressor researchers have tried to account for the fluid interaction effect of the working fluid on valve motion in displacement compressors. In recent years, the computing capacities and available CFD and FEA programs have allowed fully coupled interaction of fluids and moving structures to be modelled more comprehensively. This paper describes our experience and results from developing a model of a multi-cylinder reciprocating piston compressor with suction and discharge valve systems that are fully coupled with the pressure pulsation in the adjacent plenum. Valve dynamics are captured by the model that affects compressor performance. The results show that higher running speed causes more discharge valve delay on closing due to higher pressure pulsation in discharge plenum. The acoustic property of the discharge plenum as it relates to valve motion is studied by the developed cost-effective standalone model.

Identifying Malnutrition: Nutritional Status in Newly Diagnosed Patients With Cancer.

Science.gov (United States)

Krishnasamy, Karthikayini; Li Yoong, Tang; Mei Chan, Chong; Peng Choong, Lau; Chinna, Karuthan

2017-02-01

Malnutrition is common among patients with cancer, but little attention is given to its risks and consequences. The aim of this study is to assess the nutritional status and identify the factors associated with malnutrition among newly diagnosed patients with cancer. Patients admitted with newly diagnosed cancer at a teaching hospital in Malaysia were recruited from January to April 2015. Nutritional status was assessed before treatment initiation, and patients were classified into three categories. A total of 132 pretreatment patients were recruited into the study. About half were severely malnourished. Patients with stage III cancer had the highest prevalence of severe malnourishment. Clinical parameters and disease characteristics were significantly associated with nutritional status. Demographic variables were also statistically significantly associated with severe nutritional status.

Fully developed natural convection heat and mass transfer in a vertical annular porous medium with asymmetric wall temperatures and concentrations

International Nuclear Information System (INIS)

Cheng, C.-Y.

2006-01-01

This work examines the effects of the modified Darcy number, the buoyancy ratio and the inner radius-gap ratio on the fully developed natural convection heat and mass transfer in a vertical annular non-Darcy porous medium with asymmetric wall temperatures and concentrations. The exact solutions for the important characteristics of fluid flow, heat transfer, and mass transfer are derived by using a non-Darcy flow model. The modified Darcy number is related to the flow resistance of the porous matrix. For the free convection heat and mass transfer in an annular duct filled with porous media, increasing the modified Darcy number tends to increase the volume flow rate, total heat rate added to the fluid, and the total species rate added to the fluid. Moreover, an increase in the buoyancy ratio or in the inner radius-gap ratio leads to an increase in the volume flow rate, the total heat rate added to the fluid, and the total species rate added to the fluid

Assessment of metal retention in newly constructed highway embankments.

Science.gov (United States)

Werkenthin, Moritz; Kluge, Björn; Wessolek, Gerd

2016-12-01

Newly constructed embankments should provide both a specific bearing capacity to enable trafficability in emergency cases and a sufficient pollutant retention capacity to protect the groundwater. A number of lysimeters were installed along the A115 highway to determine total and dissolved metal concentrations in road runoff and in the soil solution of newly constructed embankments. Dissolved concentrations in soil solution of the embankments did not exceed the trigger values of the German legislation. Depending on the metal, total concentrations in soil solution were more than twice as high as dissolved concentrations. The high infiltration rates lead to increased groundwater recharge beneath the embankments (up to 4100 mm a -1 ). Although metal concentrations were not problematic from the legislators' point of view, the elevated infiltration rates beside the road facilitated the transfer of high metal loads into deeper soil layers and potentially into the groundwater as well.

Back-illuminated, fully-depleted CCD image sensors for use in optical and near-IR astronomy

CERN Document Server

Groom, D E; Levi, M E; Palaio, N P; Perlmutter, S; Stover, R J; Wei, M

2000-01-01

Charge-coupled devices (CCDs) of novel design have been fabricated at Lawrence Berkeley National Laboratory (LBNL), and the first large-format science-grade chips for astronomical imaging are now being characterized at Lick Observatory. They are made on 300-mu m thick n-type high-resistivity (approx 10 000 OMEGA cm) silicon wafers, using a technology developed at LBNL to fabricate low-leakage silicon microstrip detectors for high-energy physics. A bias voltage applied via a transparent contact on the back side fully depletes the substrate, making the entire volume photosensitive and ensuring that charge reaches the potential wells with minimal lateral diffusion. The development of a thin, transparent back-side contact compatible with fully depleted operation permits blue response comparable to that obtained with thinned CCDs. Since the entire region is active, high quantum efficiency is maintained to nearly lambda=1000 nm, above which the silicon band gap effectively truncates photoproduction. Early character...

A Fully Implantable, NFC Enabled, Continuous Interstitial Glucose Monitor

OpenAIRE

Anabtawi, Nijad; Freeman, Sabrina; Ferzli, Rony

2016-01-01

This work presents an integrated system-on-chip (SoC) that forms the core of a long-term, fully implantable, battery assisted, passive continuous glucose monitor. It integrates an amperometric glucose sensor interface, a near field communication (NFC) wireless front-end and a fully digital switched mode power management unit for supply regulation and on board battery charging. It uses 13.56 MHz (ISM) band to harvest energy and backscatter data to an NFC reader. System was implemented in 14nm ...

A fully magnetohydrodynamic simulation of three-dimensional non-null reconnection

International Nuclear Information System (INIS)

Pontin, D.I.; Galsgaard, K.; Hornig, G.; Priest, E.R.

2005-01-01

A knowledge of the nature of fully three-dimensional magnetic reconnection is crucial in understanding a great many processes in plasmas. It has been previously shown that in the kinematic regime the evolution of magnetic flux in three-dimensional reconnection is very different from two dimensions. In this paper a numerical fully magnetohydrodynamic simulation is described, in which this evolution is investigated. The reconnection takes place in the absence of a magnetic null point, and the nonideal region is localized in the center of the domain. The effect of differently prescribed resistivities is considered. The magnetic field is stressed by shear boundary motions, and a current concentration grows within the volume. A stagnation-point flow develops, with strong outflow jets emanating from the reconnection region. The behavior of the magnetic flux matches closely that discovered in the kinematic regime. In particular, it is found that no unique field line velocity exists, and that as a result field lines change their connections continually and continuously throughout the nonideal region. In order to describe the motion of magnetic flux within the domain, it is therefore necessary to use two different field line velocities. The importance of a component of the electric field parallel to the magnetic field is also demonstrated

Large fully retractable telescope enclosures still closable in strong wind

Science.gov (United States)

Bettonvil, Felix C. M.; Hammerschlag, Robert H.; Jägers, Aswin P. L.; Sliepen, Guus

2008-07-01

Two prototypes of fully retractable enclosures with diameters of 7 and 9 m have been built for the high-resolution solar telescopes DOT (Dutch Open Telescope) and GREGOR, both located at the Canary Islands. These enclosures protect the instruments for bad weather and are fully open when the telescopes are in operation. The telescopes and enclosures also operate in hard wind. The prototypes are based on tensioned membrane between movable but stiff bows, which fold together to a ring when opened. The height of the ring is small. The prototypes already survived several storms, with often snow and ice, without any damage, including hurricane Delta with wind speeds up to 68 m/s. The enclosures can still be closed and opened with wind speeds of 20 m/s without any problems or restrictions. The DOT successfully demonstrated the open, wind-flushing concept for astronomical telescopes. It is now widely recognized that also large future telescopes benefit from wind-flushing and retractable enclosures. These telescopes require enclosures with diameters of 30 m until roughly 100 m, the largest sizes for the ELTs (Extreme Large Telescopes), which will be built in the near future. We discuss developments and required technology for the realization of these large sizes.

An international crowdsourcing study into people's statements on fully automated driving

NARCIS (Netherlands)

Bazilinskyy, P.; Kyriakidis, M.; de Winter, J.C.F.; Ahram, Tareq; Karwowski, Waldemar; Schmorrow, Dylan

2015-01-01

Fully automated driving can potentially provide enormous benefits to society. However, it has been unclear whether people will appreciate such far-reaching technology. This study investigated anonymous textual comments regarding fully automated driving, based on data extracted from three online

Workplace Violence and Job Outcomes of Newly Licensed Nurses.

Science.gov (United States)

Chang, Hyoung Eun; Cho, Sung-Hyun

2016-12-01

The purpose of this study was to examine the prevalence of workplace violence toward newly licensed nurses and the relationship between workplace violence and job outcomes. An online survey was conducted of newly licensed registered nurses who had obtained their license in 2012 or 2013 in South Korea and had been working for 5-12 months after first being employed. The sample consisted of 312 nurses working in hospitals or clinics. The Copenhagen Psychosocial Questionnaire II was used to measure violence and nurse job outcomes. Multiple linear and logistic regression analyses were conducted to examine the relationship between violence and job outcomes. Verbal abuse was most prevalent (59.6%), followed by threats of violence (36.9%), physical violence (27.6%), bullying (25.6%), and sexual harassment (22.4%). Approximately three quarters of the nurses had experienced at least one type of violence. The main perpetrators were patients and nurse colleagues, although the distribution of perpetrators varied depending on the type of violence. Bullying had a significant relationship with all four job outcomes (job satisfaction, burnout, commitment to the workplace, and intent to leave), while verbal abuse was associated with all job outcomes except for intent to leave. Violence perpetrated by nurse colleagues had a significant relationship with all four job outcomes, while violence by physicians had a significant inverse relationship with job satisfaction. Workplace violence is experienced by a high percentage of newly licensed nurses, and is associated with their job outcomes. Copyright © 2016. Published by Elsevier B.V.

Fully kinetic simulations of megajoule-scale dense plasma focus

Energy Technology Data Exchange (ETDEWEB)

Schmidt, A.; Link, A.; Tang, V.; Halvorson, C.; May, M. [Lawrence Livermore National Laboratory, Livermore California 94550 (United States); Welch, D. [Voss Scientific, LLC, Albuquerque, New Mexico 87108 (United States); Meehan, B. T.; Hagen, E. C. [National Security Technologies, LLC, Las Vegas, Nevada 89030 (United States)

2014-10-15

Dense plasma focus (DPF) Z-pinch devices are sources of copious high energy electrons and ions, x-rays, and neutrons. Megajoule-scale DPFs can generate 10{sup 12} neutrons per pulse in deuterium gas through a combination of thermonuclear and beam-target fusion. However, the details of the neutron production are not fully understood and past optimization efforts of these devices have been largely empirical. Previously, we reported on the first fully kinetic simulations of a kilojoule-scale DPF and demonstrated that both kinetic ions and kinetic electrons are needed to reproduce experimentally observed features, such as charged-particle beam formation and anomalous resistivity. Here, we present the first fully kinetic simulation of a MegaJoule DPF, with predicted ion and neutron spectra, neutron anisotropy, neutron spot size, and time history of neutron production. The total yield predicted by the simulation is in agreement with measured values, validating the kinetic model in a second energy regime.

Development of Cloud Chamber by Using Peltier Device

International Nuclear Information System (INIS)

Woo, Jong Kwan; Kwon, Jin Young; Park, Sang Tae

2011-01-01

In this research, we developed the newly cloud chamber apparatus by using Peltier device to apply nuclear physics experiment in high school or university. We observed the cosmic rays track by using the developed apparatus and a camcorder. And we compared and analyzed the acquired data. From the results, we acquired the following conclusions and suggestions : First, it is very difficult to observe the cosmic rays track in the typical cloud chamber because of the low frequency of it. But in the newly developed cloud chamber we can observe easily the cosmic rays track owing to the high frequency of it. Second, when we do the experiment with the newly developed apparatus, we found that the cosmic rays track happens well under the condition that the temperature of the upper place of cooling plate must be below 5 degree Celsius with more than isopropanol 1.04X10 -5 ml.mm -3 . Third, the newly developed apparatus will be improved to have better precision by controlling the temperature of cooling plate in the cloud chamber by current intensity. Therefore we think that it is very useful to use the newly developed apparatus in the nuclear physics experiment in high school or university.

Development of Cloud Chamber by Using Peltier Device

Energy Technology Data Exchange (ETDEWEB)

Woo, Jong Kwan [Jae Hyun High School, Seoul (Korea, Republic of); Kwon, Jin Young [Jeon Min High School, Daejeon (Korea, Republic of); Park, Sang Tae [Dept. of Physics Education, Kongju National University, Kongju (Korea, Republic of)

2011-09-15

In this research, we developed the newly cloud chamber apparatus by using Peltier device to apply nuclear physics experiment in high school or university. We observed the cosmic rays track by using the developed apparatus and a camcorder. And we compared and analyzed the acquired data. From the results, we acquired the following conclusions and suggestions : First, it is very difficult to observe the cosmic rays track in the typical cloud chamber because of the low frequency of it. But in the newly developed cloud chamber we can observe easily the cosmic rays track owing to the high frequency of it. Second, when we do the experiment with the newly developed apparatus, we found that the cosmic rays track happens well under the condition that the temperature of the upper place of cooling plate must be below 5 degree Celsius with more than isopropanol 1.04X10{sup -5}ml.mm{sup -3}. Third, the newly developed apparatus will be improved to have better precision by controlling the temperature of cooling plate in the cloud chamber by current intensity. Therefore we think that it is very useful to use the newly developed apparatus in the nuclear physics experiment in high school or university.

Chenodeoxycholic acid reduces intestinal permeability in newly weaned piglets

NARCIS (Netherlands)

Meer, van der Y.; Gerrits, W.J.J.; Bosch, van den M.; Holst, J.J.; Moreto, M.; Buurman, W.A.; Kulik, W.; Kempen, van T.A.T.G.

2012-01-01

Piglets are highly susceptible to gut health-related problems. Intravenously administered chenodeoxycholic acid (CDCA) affects gut health mediated through glucagon-like peptide 2 (GLP-2). To test whether CDCA is a suitable feed additive for improving gut health, a trial was performed with newly

Object Detection Based on Fast/Faster RCNN Employing Fully Convolutional Architectures

Directory of Open Access Journals (Sweden)

Yun Ren

2018-01-01

Full Text Available Modern object detectors always include two major parts: a feature extractor and a feature classifier as same as traditional object detectors. The deeper and wider convolutional architectures are adopted as the feature extractor at present. However, many notable object detection systems such as Fast/Faster RCNN only consider simple fully connected layers as the feature classifier. In this paper, we declare that it is beneficial for the detection performance to elaboratively design deep convolutional networks (ConvNets of various depths for feature classification, especially using the fully convolutional architectures. In addition, this paper also demonstrates how to employ the fully convolutional architectures in the Fast/Faster RCNN. Experimental results show that a classifier based on convolutional layer is more effective for object detection than that based on fully connected layer and that the better detection performance can be achieved by employing deeper ConvNets as the feature classifier.

Timing of revenue streams from newly recruited faculty: implications for faculty retention.

Science.gov (United States)

Joiner, Keith A; Hiteman, Sarah; Wormsley, Steven; St Germain, Patricia

2007-12-01

To determine the timing and magnitude of revenues generated by newly recruited faculty, to facilitate configuration of recruitment packages appropriately matched to expected financial returns. The aggregate of all positive cash flows to central college of medicine administration -- from research, clinical care, tuition, philanthropy, and royalties and patents, from all faculty newly recruited to the University of Arizona College of Medicine between 1998 and 2004 -- was quantified using the net present value (npv) methodology, which incorporates the time value of money. Tenure-track faculty and, in particular, those with laboratory research programs, generated the highest positive central cash flows. The npv for positive cash flows (npv[+]) during 6 and 10 years for newly recruited assistant professors with laboratory research programs were $118,600 and $255,400, respectively, and, for professors with laboratory research programs, $172,600 and $298,000, respectively (associate professors were not analyzed because of limited numbers). Faculty whose appointments at the University of Arizona College of Medicine exceeded 15 years in duration were the most productive in central revenue generation, far in excess of their numbers proportionate to the total. The results emphasize the critical importance of faculty retention, because even those newly recruited faculty who are most successful in central revenue generation (tenure track with laboratory research programs) must be retained for periods well in excess of 10 years to recoup the initial central investment required for their recruitment.

Idaho Nuclear Technology and Engineering Center Newly Generated Liquid Waste Demonstration Project Feasibility Study

International Nuclear Information System (INIS)

Herbst, A.K.

2000-01-01

A research, development, and demonstration project for the grouting of newly generated liquid waste (NGLW) at the Idaho Nuclear Technology and Engineering Center is considered feasible. NGLW is expected from process equipment waste, decontamination waste, analytical laboratory waste, fuel storage basin waste water, and high-level liquid waste evaporator condensate. The potential grouted waste would be classed as mixed low-level waste, stabilized and immobilized to meet RCRA LDR disposal in a grouting process in the CPP-604 facility, and then transported to the state

A fully integrated wireless system for intracranial direct cortical stimulation, real-time electrocorticography data transmission, and smart cage for wireless battery recharge.

Science.gov (United States)

Piangerelli, Marco; Ciavarro, Marco; Paris, Antonino; Marchetti, Stefano; Cristiani, Paolo; Puttilli, Cosimo; Torres, Napoleon; Benabid, Alim Louis; Romanelli, Pantaleo

2014-01-01

Wireless transmission of cortical signals is an essential step to improve the safety of epilepsy procedures requiring seizure focus localization and to provide chronic recording of brain activity for Brain Computer Interface (BCI) applications. Our group developed a fully implantable and externally rechargeable device, able to provide wireless electrocorticographic (ECoG) recording and cortical stimulation (CS). The first prototype of a wireless multi-channel very low power ECoG system was custom-designed to be implanted on non-human primates. The device, named ECOGIW-16E, is housed in a compact hermetically sealed Polyether ether ketone (PEEK) enclosure, allowing seamless battery recharge. ECOGIW-16E is recharged in a wireless fashion using a special cage designed to facilitate the recharge process in monkeys and developed in accordance with guidelines for accommodation of animals by Council of Europe (ETS123). The inductively recharging cage is made up of nylon and provides a thoroughly novel experimental setting on freely moving animals. The combination of wireless cable-free ECoG and external seamless battery recharge solves the problems and shortcomings caused by the presence of cables leaving the skull, providing a safer and easier way to monitor patients and to perform ECoG recording on primates. Data transmission exploits the newly available Medical Implant Communication Service band (MICS): 402-405 MHz. ECOGIW-16E was implanted over the left sensorimotor cortex of a macaca fascicularis to assess the feasibility of wireless ECoG monitoring and brain mapping through CS. With this device, we were able to record the everyday life ECoG signal from a monkey and to deliver focal brain stimulation with movement elicitation.

A Fully-Integrated Wireless System for Intracranial Direct Cortical Stimulation, Real-Time Electrocorticography Data Trasmission and Smart Cage for Wireless Battery Recharge

Directory of Open Access Journals (Sweden)

Marco ePiangerelli

2014-08-01

Full Text Available Wireless transmission of cortical signals is an essential step to improve the safety of epilepsy procedures requiring seizure focus localization and to provide chronic recording of brain activity for Brain Computer Interface(BCI applications .Our group developed a fully implantable and externally rechargeable device, able to provide wireless electrocorticographic (ECoG recording and cortical stimulation (CS. The first prototype of a wireless multi-channel very low power ECoG system was custom-designed to be implanted on non-human primates. The device,named ECOGIW-16E, is housed in a compact hermetically sealed Polyether ether ketone (PEEK enclosure, allowing seamless battery recharge. ECOGIW-16E is recharged in a wireless fashion using a special cage designed to facilitate the recharge process in monkeys and , developed in accordance with guidelines for accommodation of animals by Council of Europe (ETS123. The inductively recharging cage is made of nylon and provides a thoroughly novel experimental setting on freely moving animals. The combination of wireless cable-free ECoG and external seamless battery recharge solve the problems and shortcomings caused by the presence of cables leaving the skull,providing a safer and easier way to monitor patients and to perform ECoG recording on primates. Data transmission exploits the newly available Medical Implant Communication Service band (MICS: 402-405 MHz. ECOGW-16E was implanted over the left sensorimotor cortex of a macaca fascicularis to assess the feasibility of wireless ECoG monitoring and brain mapping through CS. With this device we were able to record the everyday life ECoG signal from a monkey and to deliver focal brain stimulation with movement elicitation.

'BRICS without straw'? A systematic literature review of newly emerging economies' influence in global health.

Science.gov (United States)

Harmer, Andrew; Xiao, Yina; Missoni, Eduardo; Tediosi, Fabrizio

2013-04-15

Since 2010, five newly emerging economies collectively known as 'BRICS' (Brazil, India, Russia, China and South Africa) have caught the imagination, and scholarly attention, of political scientists, economists and development specialists. The prospect of a unified geopolitical bloc, consciously seeking to re-frame international (and global) health development with a new set of ideas and values, has also, if belatedly, begun to attract the attention of the global health community. But what influence, if any, do the BRICS wield in global health, and, if they do wield influence, how has that influence been conceptualized and recorded in the literature? We conducted a systematic literature review in (March-December 2012) of documents retrieved from the databases EMBASE, PubMed/Medline, Global Health, and Google Scholar, and the websites of relevant international organisations, research institutions and philanthropic organisations. The results were synthesised using a framework of influence developed for the review from the political science literature. Our initial search of databases and websites yielded 887 documents. Exclusion criteria narrowed the number of documents to 71 journal articles and 23 reports. Two researchers using an agreed set of inclusion criteria independently screened the 94 documents, leaving just 7 documents. We found just one document that provided sustained analysis of the BRICS' collective influence; the overwhelming tendency was to describe individual BRICS countries influence. Although influence was predominantly framed by BRICS countries' material capability, there were examples of institutional and ideational influence - particularly from Brazil. Individual BRICS countries were primarily 'opportunity seekers' and region mobilisers but with potential to become 'issue leaders' and region organisers. Though small in number, the written output on BRICS influence in global health has increased significantly since a similar review conducted in

Scandinavian exceptionalism? Civic integration and labour market activation for newly arrived immigrants

DEFF Research Database (Denmark)

Breidahl, Karen Nielsen

2017-01-01

models have been resilient: Based on an in-depth historical and comparative analysis of labour market activation policies targeting newly arrived immigrants in Sweden, Norway, and Denmark since the early 1990s, the article contributes to the overall question: To what extent do the institutional pathways...... of the Scandinavian welfare states prevail when confronted with newcomers? Activation policies targeting newly arrived immigrants exemplifies how the ambition of states to promote functional, individual autonomy is also an important, ongoing process in diverse policy areas of the welfare state and not restricted...

Distinguishing Newly Born Strange Stars from Neutron Stars with g-Mode Oscillations

International Nuclear Information System (INIS)

Fu Weijie; Wei Haiqing; Liu Yuxin

2008-01-01

The gravity-mode (g-mode) eigenfrequencies of newly born strange quark stars (SQSs) and neutron stars (NSs) are studied. It is found that the eigenfrequencies in SQSs are much lower than those in NSs by almost 1 order of magnitude, since the components of a SQS are all extremely relativistic particles while nucleons in a NS are nonrelativistic. We therefore propose that newly born SQSs can be distinguished from the NSs by detecting the eigenfrequencies of the g-mode pulsations of supernovae cores through gravitational radiation by LIGO-class detectors

Ten Key Steps to Developing a Programme of University Mentoring for Newly Enrolled Students

Directory of Open Access Journals (Sweden)

Raquel Casado-Muñoz

2015-05-01

Full Text Available Peer mentoring or tutoring is an educational guidance method that is growing in universities around the world. Directed at the integration of students over the first year of university studies, it is based on the support and guidance that a more experienced student offers to a recently enrolled fellow student. It is a recent process in Spain which started a little over a decade ago, but each course brings more experiences. This article, derived from research, seeks to identify a series of key steps and ideas to implement this type of programme. The summary of the proposals stems from three main sources: a the experience and assessment of the Mentoring Programme at the University of Burgos; b the review of the peer mentoring programs implemented at 35 Spanish universities; and c the review, comparison and adaptation of formal mentoring to the university according to Perrone (2003.  The outcomes may be especially useful for those universities that wish to start mentoring programmes, and as a source of reflection and comparison for those with greater experience. We believe that special attention should be given on increasing and improving participation in the mentoring of newly enrolled students and on monitoring and assessing the whole process.

Technology Implementation Plan. Fully Ceramic Microencapsulated Fuel for Commercial Light Water Reactor Application

International Nuclear Information System (INIS)

Snead, Lance Lewis; Terrani, Kurt A.; Powers, Jeffrey J.; Worrall, Andrew; Robb, Kevin R.; Snead, Mary A.

2015-01-01

This report is an overview of the implementation plan for ORNL's fully ceramic microencapsulated (FCM) light water reactor fuel. The fully ceramic microencapsulated fuel consists of tristructural isotropic (TRISO) particles embedded inside a fully dense SiC matrix and is intended for utilization in commercial light water reactor application.

Technology Implementation Plan. Fully Ceramic Microencapsulated Fuel for Commercial Light Water Reactor Application

Energy Technology Data Exchange (ETDEWEB)

Snead, Lance Lewis [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrani, Kurt A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Powers, Jeffrey J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Worrall, Andrew [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Robb, Kevin R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Snead, Mary A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-04-01

This report is an overview of the implementation plan for ORNL's fully ceramic microencapsulated (FCM) light water reactor fuel. The fully ceramic microencapsulated fuel consists of tristructural isotropic (TRISO) particles embedded inside a fully dense SiC matrix and is intended for utilization in commercial light water reactor application.

A multidisciplinary prostate cancer clinic for newly diagnosed patients: developing the role of the advanced practice nurse.

Science.gov (United States)

Madsen, Lydia T; Craig, Catherine; Kuban, Deborah

2009-06-01

Newly diagnosed patients with prostate cancer have various treatment options, and a multidisciplinary prostate cancer clinic (MPCC) can present all options in a single setting. An MPCC was started in 2004 at the University of Texas M.D. Anderson Cancer Center, and 258 patients with prostate cancer were evaluated in its first year. The clinic expanded in 2006 and an oncology advanced practice nurse (APN) was recruited to address specific objectives. The APN role was used to implement a quality-of-life protocol, provide detailed patient education (including a treatment summary and care plan), and serve as a single point of contact as patients move toward a treatment decision. Formal evaluation of the MPCC showed that patients were satisfied with this approach to the complex decision-making process in prostate cancer.

"Theory Becoming Alive": The Learning Transition Process of Newly Graduated Nurses in Canada.

Science.gov (United States)

Nour, Violet; Williams, Anne M

2018-01-01

Background Newly graduated nurses often encounter a gap between theory and practice in clinical settings. Although this has been the focus of considerable research, little is known about the learning transition process. Purpose The purpose of this study was to explore the experiences of newly graduated nurses in acute healthcare settings within Canada. This study was conducted to gain a greater understanding of the experiences and challenges faced by graduates. Methods Grounded theory method was utilized with a sample of 14 registered nurses who were employed in acute-care settings. Data were collected using in-depth interviews. Constant comparative analysis was used to analyze data. Results Findings revealed a core category, "Theory Becoming Alive," and four supporting categories: Entry into Practice, Immersion, Committing, and Evolving. Theory Becoming Alive described the process of new graduate nurses' clinical learning experiences as well as the challenges that they encountered in clinical settings after graduating. Conclusions This research provides a greater understanding of learning process of new graduate nurses in Canada. It highlights the importance of providing supportive environments to assist new graduate nurses to develop confidence as independent registered nurses in clinical areas. Future research directions as well as supportive educational strategies are described.

A Fully Implantable, NFC Enabled, Continuous Interstitial Glucose Monitor.

Science.gov (United States)

Anabtawi, Nijad; Freeman, Sabrina; Ferzli, Rony

2016-02-01

This work presents an integrated system-on-chip (SoC) that forms the core of a long-term, fully implantable, battery assisted, passive continuous glucose monitor. It integrates an amperometric glucose sensor interface, a near field communication (NFC) wireless front-end and a fully digital switched mode power management unit for supply regulation and on board battery charging. It uses 13.56 MHz (ISM) band to harvest energy and backscatter data to an NFC reader. System was implemented in 14nm CMOS technology and validated with post layout simulations.

The lived experience of newly qualified radiographers (1950-1985): An oral history of radiography

International Nuclear Information System (INIS)

Decker, Sola

2009-01-01

The preparedness for practice of newly qualified healthcare professionals (including radiographers) has been the focus of attention in recent years as the practice environment continues to place great demands on its workforce. This paper reports an aspect of the findings from an oral history project on the career history of radiographers conducted as an academic research investigating the changes that have occurred in radiography and the impact these have had on the profession and the practice of radiography. The main focus of this paper is the lived experience of the informants of the oral history project as newly qualified radiographers. The findings are discussed in the context of current practice environment and developments in radiography. Analysis of the textual materials generated from informants' oral historical accounts, suggest radiographers trained in this time frame perceived their training as 'fit for purpose. The findings further suggest there is a general norm of 'get-on-with-it' as a coping strategy which is still prevalent in the profession today. The paper concludes by drawing on lessons that can be learned from the lived experiences of radiographers' oral historical accounts.

Automation in trace-element chemistry - Development of a fully automated on-line preconcentration device for trace analysis of heavy metals with atomic spectroscopy

International Nuclear Information System (INIS)

Michaelis, M.R.A.

1990-01-01

Scope of this work was the development of an automated system for trace element preconcentration to be used and integrated to analytic atomic spectroscopic methods like flame atomic absorption spectrometry (FAAS), graphite furnace atomic absorption spectrometry (GFAAS) or atomic emission spectroscopy with inductively coupled plasma (ICP-AES). Based on the newly developed cellulose-based chelating cation exchangers ethylene-diamin-triacetic acid cellulose (EDTrA-Cellulose) and sulfonated-oxine cellulose a flexible, computer-controlled instrument for automation of preconcentration and/or of matrix separation of heavy metals is described. The most important properties of these materials are fast exchange kinetics, good selectivity against alkaline and alkaline earth elements, good flow characteristics and good stability of the material and the chelating functions against changes in pH-values of reagents necessary in the process. The combination of the preconcentration device for on-line determinations of Zn, Cd, Pb, Ni, Fe, Co, Mn, V, Cu, La, U, Th is described for FAAS and for ICP-AES with a simultaneous spectrometer. Signal enhancement factors of 70 are achieved from preconcentration of 10 ml and on-line determination with FAAS due to signal quantification in peak-height mode. For GFAAS and for sequential ICP methods for off-line preconcentration are given. The optimization and adaption of the interface to the different characteristics of the analytical instrumentation is emphasized. For evaluation and future developments with respect to determination and/or preconcentration of anionic species like As, Se, Sb etc. instrument modifications are proposed and a development software is described. (Author)

A new design concept of fully grouted rock bolts in underground construction

Science.gov (United States)

Phich Nguyen, Quang; Nguyen, Van Manh; Tuong Nguyen, Ke

2018-04-01

The main problem after excavating an underground excavation is to maintain the stability of the excavation for a certain period of time. Failure in meeting this demand is a threat to safety of men and equipment. Support and reinforcement are different instruments with different mechanisms. Among the common support systems in tunnelling and mining, rock bolts have been widely used to reinforce rock mass and also to reduce geological hazards. Furthermore rock bolts can be applied under varying different geological conditions with cost-effectiveness. Although different methods are developed for grouted rock bolts design until now, the interaction mechanism of the rock bolts and rock mass is still very complicated issue. The paper addresses an analytical model for the analysis and design of fully grouted rock bolts based on the reinforcement principle. According to this concept the jointed rock mass reinforced by grouted rock bolts is considered as composite material which includes rock mass, the grout material and the bolt shank. The mechanical properties of this composite material depend on the ratio of the components. The closed-form solution was developed based on the assumption that the rock mass arround a circular tunnel remained elastic after installing fully grouted rock bolts. The main parameters of the rock-bolt system (the diameter and length of bolt shank, the space between the bolts) are then easily estimated from the obtained solution.

Newly Discovered Ebola Virus Associated with Hemorrhagic Fever Outbreak in Uganda

Science.gov (United States)

Towner, Jonathan S.; Sealy, Tara K.; Khristova, Marina L.; Albariño, César G.; Conlan, Sean; Reeder, Serena A.; Quan, Phenix-Lan; Lipkin, W. Ian; Downing, Robert; Tappero, Jordan W.; Okware, Samuel; Lutwama, Julius; Bakamutumaho, Barnabas; Kayiwa, John; Comer, James A.; Rollin, Pierre E.; Ksiazek, Thomas G.; Nichol, Stuart T.

2008-01-01

Over the past 30 years, Zaire and Sudan ebolaviruses have been responsible for large hemorrhagic fever (HF) outbreaks with case fatalities ranging from 53% to 90%, while a third species, Côte d'Ivoire ebolavirus, caused a single non-fatal HF case. In November 2007, HF cases were reported in Bundibugyo District, Western Uganda. Laboratory investigation of the initial 29 suspect-case blood specimens by classic methods (antigen capture, IgM and IgG ELISA) and a recently developed random-primed pyrosequencing approach quickly identified this to be an Ebola HF outbreak associated with a newly discovered ebolavirus species (Bundibugyo ebolavirus) distantly related to the Côte d'Ivoire ebolavirus found in western Africa. Due to the sequence divergence of this new virus relative to all previously recognized ebolaviruses, these findings have important implications for design of future diagnostic assays to monitor Ebola HF disease in humans and animals, and ongoing efforts to develop effective antivirals and vaccines. PMID:19023410

Electroviscous effects in steady fully developed flow of a power-law liquid through a cylindrical microchannel

International Nuclear Information System (INIS)

Bharti, Ram P.; Harvie, Dalton J.E.; Davidson, Malcolm R.

2009-01-01

Electroviscous effects in steady, fully developed, pressure-driven flow of power-law liquids through a uniform cylindrical microchannel have been investigated numerically by solving the Poisson-Boltzmann and the momentum equations using a finite difference method. The pipe wall is considered to have uniform surface charge density and the liquid is assumed to be a symmetric 1:1 electrolyte solution. Electroviscous resistance reduces the velocity adjacent to the wall, relative to the velocity on the axis. The effect is shown to be greater when the liquid is shear-thinning, and less when it is shear-thickening, than it is for Newtonian flow. For overlapping electrical double layers and elevated surface charge density, the electroviscous reduction in the near-wall velocity can form an almost stationary (zero shear) layer there when the liquid is shear-thinning. In that case, the liquid behaves approximately as if it is flowing through a channel of reduced diameter. The induced axial electrical field shows only a weak dependence on the power-law index with the dependence being greatest for shear-thinning liquids. This field exhibits a local maximum as surface charge density increases from zero, even though the corresponding electrokinetic resistance increases monotonically. The magnitude of the electroviscous effect on the apparent viscosity, as measured by the ratio of the apparent and physical consistency indices, decreases monotonically as the power-law index increases. Thus, overall, the electroviscous effect is stronger in shear-thinning, and weaker in shear-thickening liquids, than it is when the liquid is Newtonian.

Scalable Nonlinear Solvers for Fully Implicit Coupled Nuclear Fuel Modeling. Final Report

International Nuclear Information System (INIS)

Cai, Xiao-Chuan; Yang, Chao; Pernice, Michael

2014-01-01

The focus of the project is on the development and customization of some highly scalable domain decomposition based preconditioning techniques for the numerical solution of nonlinear, coupled systems of partial differential equations (PDEs) arising from nuclear fuel simulations. These high-order PDEs represent multiple interacting physical fields (for example, heat conduction, oxygen transport, solid deformation), each is modeled by a certain type of Cahn-Hilliard and/or Allen-Cahn equations. Most existing approaches involve a careful splitting of the fields and the use of field-by-field iterations to obtain a solution of the coupled problem. Such approaches have many advantages such as ease of implementation since only single field solvers are needed, but also exhibit disadvantages. For example, certain nonlinear interactions between the fields may not be fully captured, and for unsteady problems, stable time integration schemes are difficult to design. In addition, when implemented on large scale parallel computers, the sequential nature of the field-by-field iterations substantially reduces the parallel efficiency. To overcome the disadvantages, fully coupled approaches have been investigated in order to obtain full physics simulations.

Global fully kinetic models of planetary magnetospheres with iPic3D

Science.gov (United States)

Gonzalez, D.; Sanna, L.; Amaya, J.; Zitz, A.; Lembege, B.; Markidis, S.; Schriver, D.; Walker, R. J.; Berchem, J.; Peng, I. B.; Travnicek, P. M.; Lapenta, G.

2016-12-01

We report on the latest developments of our approach to model planetary magnetospheres, mini magnetospheres and the Earth's magnetosphere with the fully kinetic, electromagnetic particle in cell code iPic3D. The code treats electrons and multiple species of ions as full kinetic particles. We review: 1) Why a fully kinetic model and in particular why kinetic electrons are needed for capturing some of the most important aspects of the physics processes of planetary magnetospheres. 2) Why the energy conserving implicit method (ECIM) in its newest implementation [1] is the right approach to reach this goal. We consider the different electron scales and study how the new IECIM can be tuned to resolve only the electron scales of interest while averaging over the unresolved scales preserving their contribution to the evolution. 3) How with modern computing planetary magnetospheres, mini magnetosphere and eventually Earth's magnetosphere can be modeled with fully kinetic electrons. The path from petascale to exascale for iPiC3D is outlined based on the DEEP-ER project [2], using dynamic allocation of different processor architectures (Xeon and Xeon Phi) and innovative I/O technologies.Specifically results from models of Mercury are presented and compared with MESSENGER observations and with previous hybrid (fluid electrons and kinetic ions) simulations. The plasma convection around the planets includes the development of hydrodynamic instabilities at the flanks, the presence of the collisionless shocks, the magnetosheath, the magnetopause, reconnection zones, the formation of the plasma sheet and the magnetotail, and the variation of ion/electron plasma flows when crossing these frontiers. Given the full kinetic nature of our approach we focus on detailed particle dynamics and distribution at locations that can be used for comparison with satellite data. [1] Lapenta, G. (2016). Exactly Energy Conserving Implicit Moment Particle in Cell Formulation. arXiv preprint ar

Cytological Evaluation and REBA HPV-ID HPV Testing of Newly Developed Liquid-Based Cytology, EASYPREP: Comparison with SurePath.

Science.gov (United States)

Lee, Youn Soo; Gong, Gyungyub; Sohn, Jin Hee; Ryu, Ki Sung; Lee, Jung Hun; Khang, Shin Kwang; Cho, Kyung-Ja; Kim, Yong-Man; Kang, Chang Suk

2013-06-01

The objective of this study was to evaluate a newly-developed EASYPREP liquid-based cytology method in cervicovaginal specimens and compare it with SurePath. Cervicovaginal specimens were prospectively collected from 1,000 patients with EASYPREP and SurePath. The specimens were first collected by brushing for SurePath and second for EASYPREP. The specimens of both methods were diagnosed according to the Bethesda System. Additionally, we performed to REBA HPV-ID genotyping and sequencing analysis for human papillomavirus (HPV) on 249 specimens. EASYPREP and SurePath showed even distribution of cells and were equal in cellularity and staining quality. The diagnostic agreement between the two methods was 96.5%. Based on the standard of SurePath, the sensitivity, specificity, positive predictive value, and negative predictive value of EASYPREP were 90.7%, 99.2%, 94.8%, and 98.5%, respectively. The positivity of REBA HPV-ID was 49.4% and 95.1% in normal and abnormal cytological samples, respectively. The result of REBA HPV-ID had high concordance with sequencing analysis. EASYPREP provided comparable results to SurePath in the diagnosis and staining quality of cytology examinations and in HPV testing with REBA HPV-ID. EASYPREP could be another LBC method choice for the cervicovaginal specimens. Additionally, REBA HPV-ID may be a useful method for HPV genotyping.

Effect of Annealing Temperature on the Mechanical and Corrosion Behavior of a Newly Developed Novel Lean Duplex Stainless Steel.

Science.gov (United States)

Guo, Yanjun; Hu, Jincheng; Li, Jin; Jiang, Laizhu; Liu, Tianwei; Wu, Yanping

2014-09-12

The effect of annealing temperature (1000-1150 °C) on the microstructure evolution, mechanical properties, and pitting corrosion behavior of a newly developed novel lean duplex stainless steel with 20.53Cr-3.45Mn-2.08Ni-0.17N-0.31Mo was studied by means of optical metallographic microscopy (OMM), scanning electron microscopy (SEM), magnetic force microscopy (MFM), scanning Kelvin probe force microscopy (SKPFM), energy dispersive X-ray spectroscopy (EDS), uniaxial tensile tests (UTT), and potentiostatic critical pitting temperature (CPT). The results showed that tensile and yield strength, as well as the pitting corrosion resistance, could be degraded with annealing temperature increasing from 1000 up to 1150 °C. Meanwhile, the elongation at break reached the maximum of 52.7% after annealing at 1050 °C due to the effect of martensite transformation induced plasticity (TRIP). The localized pitting attack preferentially occurred at ferrite phase, indicating that the ferrite phase had inferior pitting corrosion resistance as compared to the austenite phase. With increasing annealing temperature, the pitting resistance equivalent number (PREN) of ferrite phase dropped, while that of the austenite phase rose. Additionally, it was found that ferrite possessed a lower Volta potential than austenite phase. Moreover, the Volta potential difference between ferrite and austenite increased with the annealing temperature, which was well consistent with the difference of PREN.

Experimental investigation for determination of optimal X-ray beam tube voltages in a newly developed digital breast tomosynthesis system

Energy Technology Data Exchange (ETDEWEB)

Park, Hye-Suk, E-mail: radiosugar@yonsei.ac.kr [Department of Radiological Science and Research Institute of Health Science, Yonsei University, Wonju, Gangwon 220-710 (Korea, Republic of); Kim, Ye-Seul, E-mail: radiohesugar@gmail.com [Department of Radiological Science and Research Institute of Health Science, Yonsei University, Wonju, Gangwon 220-710 (Korea, Republic of); Choi, Young-Wook, E-mail: ywchoi@keri.re.kr [Korea Electrotechnology Research Institute (KERI), Ansan, Geongki 426-170 (Korea, Republic of); Choi, JaeGu, E-mail: jgchoi88@paran.com [Korea Electrotechnology Research Institute (KERI), Ansan, Geongki 426-170 (Korea, Republic of); Rhee, Yong-Chun, E-mail: ycrhee@yonsei.ac.kr [Department of Radiological Science and Research Institute of Health Science, Yonsei University, Wonju, Gangwon 220-710 (Korea, Republic of); Kim, Hee-Joung, E-mail: hjk1@yonsei.ac.kr [Department of Radiological Science and Research Institute of Health Science, Yonsei University, Wonju, Gangwon 220-710 (Korea, Republic of)

2014-11-01

Our purpose was to investigate optimal tube voltages (kVp) for a newly developed digital breast tomosynthesis (DBT) process and to determine tube current–exposure time products (mA s) for the average glandular dose (AGD), which is similar to that of the two views in conventional mammography (CM). In addition, the optimal acquisition parameters for this system were compared with those of CM. The analysis was based on the contrast-to-noise ratio (CNR) from the simulated micro-calcifications on homogeneous phantoms, and the figure of merit (FOM) was retrieved from the CNR and AGD at X-ray tube voltages ranging from 24 to 40 kVp at intervals of 2 kV. The optimal kVp increased more than 2 kV with increasing glandularity for thicker (≥50 mm) breast phantoms. The optimal kVp for DBT was found to be 4–7 kV higher than that calculated for CM with breast phantoms thicker than 50 mm. This is likely due to the greater effect of noise and dose reduction by kVp increment when using the lower dose per projection in DBT. It is important to determine optimum acquisition conditions for a maximally effective DBT system. The results of our study provide useful information to further improve DBT for high quality imaging.

Limit load and fully plastic stress analysis for circular notched plates and bars using fully plastic analysis

International Nuclear Information System (INIS)

Oh, Chang Kyun; Myung, Man Sik; Kim, Yun Jae; Park, Jin Moo

2005-01-01

For the last four decades, tension test of notched bars has been performed to investigate the effect of stress triaxiality on ductile fracture. To quantify the effect of the notch radius on stress triaxiality, the Bridgman equation is typically used. However, recent works based on detailed finite element analysis have shown that the Bridgman equation is not correct, possibly due to his assumption that strain is constant in the necked ligament. Up to present, no systematic work has been performed on fully plastic stress fields for notched bars in tension. This paper presents fully plastic results for tension of notched bars and plates in plane strain, via finite element limit analysis. The notch radius is systematically varied, covering both un-cracked and cracked cases. Comparison of plastic limit loads with existing solutions shows that existing solutions are accurate for notched plates, but not for notched bars. Accordingly new limit load solutions are given for notched bars. Variations of stress triaxiality with the notch radius and depth are also given, which again indicates that the Bridgman solution for notched bars is not correct and inaccuracy depends on the notch radius and depth

Fully hadronic ttbar cross section measurement with ATLAS detector

CERN Document Server

Bertella, Claudia

2011-01-01

The top quark pair production cross section in the fully hadronic final state is characterized by a six jet topology, two of which could be identified as originating from a b-quark using ATLAS b-tagging algorithms. Compared to other decay channels, this final state presents an advantageous larger branching ratio; on the other hand it suffers from a very large QCD multi-jet background, generally difficult to estimate from Monte Carlo simulation and therefore evaluated using data-driven techniques. The analysis is performed using 36pb-1 of pp collisions produced at the LHC with a center-of-mass energy of 7 TeV. The observed upper limit is set at 261 pb at 95% confidence level, where the expected Standard Model cross-section for the ttbar process is 165+11-16 pb. In the future, when the LHC luminosity increases, it is essential, to efficiently trigger on these fully hadronic ttbar events, to use dedicated triggers. An overview of the analysis for ttbar production cross section measurement in the fully hadronic f...

Methodology for Determining the Avoidable and Fully Allocated Costs of Amtrak Routes : Volume III, Appendix B-H

Science.gov (United States)

2009-08-01

The Federal Railroad Administration tasked the Volpe Center with developing a methodology for determining the avoidable and fully allocated costs of Amtrak routes. Avoidable costs are costs that would not be incurred if an Amtrak route were discontin...

[Psycho-social factors of sexual failure among newly married Uyghur young males].

Science.gov (United States)

Erkin, Ashim; Hamrajan, Memtili; Kadirjan, Mijit; Adil, Eli; Elijan, Abdureshit; Ibrahim, Ubul; Abdulla, Tursun; Hasanjan, Abdurehim; Turgun, Hekim; Eli, Ablet; Eset, Metmusa

2016-08-01

To study the psycho-social risk factors of sexual failure among newly married young males in the Uyghur population. We conducted a paired case control study of 186 newly married Uyghur young males (aged 17－30 ［23.4±2.9］ yr) with sexual failure and another 186 (aged 18－34 ［24.0±3.1］ yr) with no such problem as controls. We performed a logistic regression analysis on the possible psycho-social risk factors of this condition. Logistic regression analysis showed that the risk factors of sexual failure among the newly married men included personality (OR=0.271, 95% CI 0.176－0.420), income (OR=0.391, 95% CI 0.264－0.580), history of masturbation (OR=0.824, 95% CI 0.710－0.956), premarital sex (OR=0.757, 95% CI 0.677－0.847), sense of obligation (OR=1.756, 95% CI 1.157－2.693), equality of the social status (OR=0.574, 95% CI 0.435－0.756), degree of mutual care (OR=1.605, 95% CI 1.268－2.032), female's psychological obstacle (OR=2.832, 95% CI 1.221－6.569), and religion (OR=0.643, 95% CI 0.472－0.967). There was a statistical significance in the correlation between these factors and sexual failure in the newly married males (all Ppsycho-social factors, which necessitates sexual education among young males and particularly pre-marriage sexual education and psychological guide among both males and females.

Three newly recorded Linyphiid spiders (Araneae: Linyphiidae from Korea

Directory of Open Access Journals (Sweden)

Sue Yeon Lee

2018-03-01

Full Text Available Three Linyphiid spiders, Caviphantes pseudosaxetorum Wunderlich, 1979, Erigone edentata Saito and Ono, 2001, and Savignia kawachiensis Oi, 1960, are reported for the first time from Korea with taxonomic illustrations and redescription. In this study, the genus Caviphantes Oi, 1960 is also newly recorded to Korean spider fauna.

[Impact of Increased Supply of Newly Licensed Nurses on Hospital Nurse Staffing and Policy Implications].

Science.gov (United States)

Kim, Yunmi; You, Sunju; Kim, Jinhyun

2017-12-01

This study aimed to analyze the impact of increasing the supply of newly licensed nurses on improving the hospital nurse staffing grades for the period of 2009~2014. Using public administrative data, we analyzed the effect of newly licensed nurses on staffing in 1,594 hospitals using Generalized Estimating Equation (GEE) ordered logistic regression, and of supply variation on improving staffing grades in 1,042 hospitals using GEE logistic regression. An increase of one newly licensed nurse per 100 beds in general units had significantly lower odds of improving staffing grades (grades 6~0 vs. 7) (odds ratio=0.95, p=.005). The supply of newly licensed nurses increased by 32% from 2009 to 2014, and proportion of hospitals whose staffing grade had improved, not changed, and worsened was 19.1%, 70.1%, and 10.8% respectively. Compared to 2009, the supply variation of newly licensed nurses in 2014 was not significantly related to the increased odds of improving staffing grades in the region (OR=1.02, p=.870). To achieve a balance in the regional supply and demand for hospital nurses, compliance with nurse staffing legislation and revisions in the nursing fee differentiation policy are needed. Rather than relying on increasing nurse supply, retention policies for new graduate nurses are required to build and sustain competent nurse workforce in the future. © 2017 Korean Society of Nursing Science

Feasibility and effects of newly developed balance control trainer for mobility and balance in chronic stroke patients: a randomized controlled trial.

Science.gov (United States)

Lee, So Hyun; Byun, Seung Deuk; Kim, Chul Hyun; Go, Jin Young; Nam, Hyeon Uk; Huh, Jin Seok; Jung, Tae Du

2012-08-01

To investigate the feasibility and effects of balance training with a newly developed Balance Control Trainer (BCT) that applied the concept of vertical movement for the improvements of mobility and balance in chronic stroke patients. Forty chronic stroke patients were randomly assigned to an experimental or a control group. The experimental group (n=20) underwent training with a BCT for 20 minutes a day, 5 days a week for 4 weeks, in addition to concurrent conventional physical therapy. The control group (n=20) underwent only conventional therapy for 4 weeks. All participants were assessed by: the Functional Ambulation Categories (FAC), 10-meter Walking Test (10mWT), Timed Up and Go test (TUG), Berg Balance Scale (BBS), Korean Modified Barthel Index (MBI), and Manual Muscle Test (MMT) before training, and at 2 and 4 weeks of training. There were statistically significant improvements in all parameters except knee extensor power at 2 weeks of treatment, and in all parameters except MBI which showed further statistically significant progress in the experimental group over the next two weeks (pgait in ambulatory chronic stroke patients. Furthermore, it may provide additional benefits when used in conjunction with conventional therapies.

Hope in newly diagnosed cancer patients.

Science.gov (United States)

Duggleby, Wendy; Ghosh, Sunita; Cooper, Dan; Dwernychuk, Lynne

2013-11-01

Hope is important to cancer patients as it helps them deal with their diagnosis. Little is known about hope in newly diagnosed cancer patients. Based on the Transcending Possibilities conceptual model of hope, the purpose of this study was to examine the relationship of hope with pain, energy, and psychological and demographic characteristics in newly diagnosed adult oncology outpatients. Data from 310 New Patient Assessment Forms from cancer outpatients' health records were collected. Health records from the first six months of 2009 were reviewed and data were collected on hope, energy, pain, depression, anxiety, feeling overwhelmed, and demographic variables. A generalized linear modeling approach was used to study the relationship of hope scores with these variables. Hypothesized variables and variables that were significant at the P = 0.01 level from the univariate analysis were entered into the multivariate model, with hope scores as the dependent variable. Hope scores were significantly negatively related to age (P = 0.02). More specifically, oncology patients who were 65 years of age or older had significantly less hope than those under the age of 65 years (P = 0.01). Gender (P = 0.009) also was a significant factor, with men having higher hope scores than women. No other variables were significant. Older adults comprise the majority of persons in Canada with cancer. The lower hope scores found in this age group compared with their younger counterparts underscore the importance of further research. This study provides a foundation for future research in this important area for oncology patients. Copyright © 2013 U.S. Cancer Pain Relief Committee. Published by Elsevier Inc. All rights reserved.

Different Pathophysiological Phenotypes among Newly Diagnosed Type 2 Diabetes Patients

DEFF Research Database (Denmark)

Stidsen, Jacob

2013-01-01

Type 2 diabetes (T2D) can be considered a syndrome with several different pathophysiological mechanisms leading to hyperglycemia. Nonetheless, T2D is treated according to algorithms as if it was one disease entity. Methods: We investigated the prevalence of different pathophysiological phenotypes...... or secondary diabetes), classic obesity-associated insulin resistant diabetes ( f-P-C-peptide >= 568 pmol/l) and a normoinsulinopenic group (333 age of our new T2D patients was 61 years (range 21-95 years), 57% were men. We found that 3.0% newly diagnosed T2D patients...... suffered from LADA, 3.9% from secondary diabetes, 6.0% from steroid induced diabetes 5.9% had insulinopenic diabetes, whereas 56.7% presented the classic obesity-associated insulin-resistant phenotype. 24.6% was classified as normoinsulinopenic patients. Conclusion: We conclude that newly diagnosed T2D...

Challenges on innovations of newly-developed safety analysis codes

International Nuclear Information System (INIS)

Yang, Yanhua; Zhang, Hao

2016-01-01

With the development of safety analysis method, the safety analysis codes meet more challenges. Three challenges are presented in this paper, which are mathematic model, code design and user interface. Combined with the self-reliance safety analysis code named COSINE, the ways of meeting these requirements are suggested, that is to develop multi-phases, multi-fields and multi-dimension models, to adopt object-oriented code design ideal and to improve the way of modeling, calculation control and data post-processing in the user interface.

Challenges on innovations of newly-developed safety analysis codes

Energy Technology Data Exchange (ETDEWEB)

Yang, Yanhua [Shanghai Jiao Tong Univ. (China). School of Nuclear Science and Engineering; Zhang, Hao [State Nuclear Power Software Development Center, Beijing (China). Beijing Future Science and Technology City

2016-05-15

With the development of safety analysis method, the safety analysis codes meet more challenges. Three challenges are presented in this paper, which are mathematic model, code design and user interface. Combined with the self-reliance safety analysis code named COSINE, the ways of meeting these requirements are suggested, that is to develop multi-phases, multi-fields and multi-dimension models, to adopt object-oriented code design ideal and to improve the way of modeling, calculation control and data post-processing in the user interface.

Equipment for fully automatic radiographic pipe inspection

International Nuclear Information System (INIS)

Basler, G.; Sperl, H.; Weinschenk, K.

1977-01-01

The patent describes a device for fully automatic radiographic testing of large pipes with longitudinal welds. Furthermore the invention enables automatic marking of films in radiographic inspection with regard to a ticketing of the test piece and of that part of it where testing took place. (RW) [de

Fully automatic characterization and data collection from crystals of biological macromolecules

International Nuclear Information System (INIS)

Svensson, Olof; Malbet-Monaco, Stéphanie; Popov, Alexander; Nurizzo, Didier; Bowler, Matthew W.

2015-01-01

A fully automatic system has been developed that performs X-ray centring and characterization of, and data collection from, large numbers of cryocooled crystals without human intervention. Considerable effort is dedicated to evaluating macromolecular crystals at synchrotron sources, even for well established and robust systems. Much of this work is repetitive, and the time spent could be better invested in the interpretation of the results. In order to decrease the need for manual intervention in the most repetitive steps of structural biology projects, initial screening and data collection, a fully automatic system has been developed to mount, locate, centre to the optimal diffraction volume, characterize and, if possible, collect data from multiple cryocooled crystals. Using the capabilities of pixel-array detectors, the system is as fast as a human operator, taking an average of 6 min per sample depending on the sample size and the level of characterization required. Using a fast X-ray-based routine, samples are located and centred systematically at the position of highest diffraction signal and important parameters for sample characterization, such as flux, beam size and crystal volume, are automatically taken into account, ensuring the calculation of optimal data-collection strategies. The system is now in operation at the new ESRF beamline MASSIF-1 and has been used by both industrial and academic users for many different sample types, including crystals of less than 20 µm in the smallest dimension. To date, over 8000 samples have been evaluated on MASSIF-1 without any human intervention

Fully automatic characterization and data collection from crystals of biological macromolecules

Energy Technology Data Exchange (ETDEWEB)

Svensson, Olof; Malbet-Monaco, Stéphanie; Popov, Alexander; Nurizzo, Didier, E-mail: nurizzo@esrf.fr [European Synchrotron Radiation Facility, 71 Avenue des Martyrs, CS 40220, 38043 Grenoble (France); Bowler, Matthew W., E-mail: nurizzo@esrf.fr [European Molecular Biology Laboratory, Grenoble Outstation, 71 Avenue des Martyrs, CS 90181, 38042 Grenoble (France); Université Grenoble Alpes–EMBL–CNRS, Grenoble Outstation, 71 Avenue des Martyrs, CS 90181, 38042 Grenoble (France); European Synchrotron Radiation Facility, 71 Avenue des Martyrs, CS 40220, 38043 Grenoble (France)

2015-07-31

A fully automatic system has been developed that performs X-ray centring and characterization of, and data collection from, large numbers of cryocooled crystals without human intervention. Considerable effort is dedicated to evaluating macromolecular crystals at synchrotron sources, even for well established and robust systems. Much of this work is repetitive, and the time spent could be better invested in the interpretation of the results. In order to decrease the need for manual intervention in the most repetitive steps of structural biology projects, initial screening and data collection, a fully automatic system has been developed to mount, locate, centre to the optimal diffraction volume, characterize and, if possible, collect data from multiple cryocooled crystals. Using the capabilities of pixel-array detectors, the system is as fast as a human operator, taking an average of 6 min per sample depending on the sample size and the level of characterization required. Using a fast X-ray-based routine, samples are located and centred systematically at the position of highest diffraction signal and important parameters for sample characterization, such as flux, beam size and crystal volume, are automatically taken into account, ensuring the calculation of optimal data-collection strategies. The system is now in operation at the new ESRF beamline MASSIF-1 and has been used by both industrial and academic users for many different sample types, including crystals of less than 20 µm in the smallest dimension. To date, over 8000 samples have been evaluated on MASSIF-1 without any human intervention.

FMFT. Fully massive four-loop tadpoles

Energy Technology Data Exchange (ETDEWEB)

Pikelner, Andrey [Hamburg Univ. (Germany). 2. Inst. fuer Theoretische Physik

2017-07-15

We present FMFT - a package written in FORM that evaluates four-loop fully massive tadpole Feynman diagrams. It is a successor of the MATAD package that has been successfully used to calculate many renormalization group functions at three-loop order in a wide range of quantum field theories especially in the Standard Model. We describe an internal structure of the package and provide some examples of its usage.

FMFT: fully massive four-loop tadpoles

Science.gov (United States)

Pikelner, Andrey

2018-03-01

We present FMFT - a package written in FORM that evaluates four-loop fully massive tadpole Feynman diagrams. It is a successor of the MATAD package that has been successfully used to calculate many renormalization group functions at three-loop order in a wide range of quantum field theories especially in the Standard Model. We describe an internal structure of the package and provide some examples of its usage.

Cooperative study of clinical benefits from use of the fully portable blood irradiator

International Nuclear Information System (INIS)

Hungate, F.P.

1994-10-01

This report looks at the clinical benefits from use of a fully portable blood irradiator, techniques developed by Pacific Northwest Laboratory. Significant accomplishments included the following: blood irradiators were successfully fabricated by PNL; irradiators were activated at the University of Missouri and quality tested at PNL; A-V shunts for irradiators were successfully fabricated in the PNL plastics shop; all activities necessary for experimental work on animals using the blood irradiators were completed

Cooperative study of clinical benefits from use of the fully portable blood irradiator

Energy Technology Data Exchange (ETDEWEB)

Hungate, F.P.

1994-10-01

This report looks at the clinical benefits from use of a fully portable blood irradiator, techniques developed by Pacific Northwest Laboratory. Significant accomplishments included the following: blood irradiators were successfully fabricated by PNL; irradiators were activated at the University of Missouri and quality tested at PNL; A-V shunts for irradiators were successfully fabricated in the PNL plastics shop; all activities necessary for experimental work on animals using the blood irradiators were completed.

Higher incidence of hip fracture in newly diagnosed schizophrenic ...

African Journals Online (AJOL)

Higher incidence of hip fracture in newly diagnosed schizophrenic patients in Taiwan. Hip fracture is a major public health concern due to its poor outcome and serious socioeconomic burden in older people (1). Evidence has shown that many factors are related to increased risk of hip fracture, but psychiatric diseases are ...

Death Concerns among Individuals Newly Diagnosed with Lung Cancer

Science.gov (United States)

Lehto, Rebecca; Therrien, Barbara

2010-01-01

Confronting the reality of death is an important challenge for individuals facing life-threatening illness such as lung cancer, the leading cause of cancer death. Few studies, however, document the nature of death-related concerns in individuals newly diagnosed with lung cancer. The aims of this exploratory study were to examine unsolicited…

Patients with newly diagnosed Rheumatoid Arthritis are at increased risk of Diabetes Mellitus

DEFF Research Database (Denmark)

Emamifar, Amir; Levin, Klaus; Jensen Hansen, Inger Marie

2018-01-01

-C-reactive protein (DAS28-CRP) at the time of diagnosis and after 4 months (±1-2 months) of treatment initiation were extracted from Danbio Registry. To reveal the presence of DM, patients' electronic medical records were reviewed. The prevalence of DM in our patients was compared (using an age- and gender......-matched analysis) with that expected from Danish population. RESULTS: of 439 included patients, 60.1% were female, mean of age 64.6±15.0 years and RA disease duration 2.6±1.7 years. Prevalence of DM was 57/439 (12.9%), herein type II DM 52 (91.2%) and type I DM 5 (8.8%). Except for two patients, diagnosis of DM......AIMS: To reveal the prevalence of Diabetes Mellitus (DM) in patients with newly diagnosed Rheumatoid Arthritis (RA) and evaluate the association between clinical characteristics of RA and DM as well as treatment response in newly diagnosed RA patients with DM. METHODS: Newly diagnosed, adult, RA...

Changes in immunological status among newly-diagnosed HIV-infected in Denmark 1995-2005

DEFF Research Database (Denmark)

Hoegh, S.; Lohse, N.; Hansen, A.B.

2008-01-01

INTRODUCTION: The incidence of new HIV diagnoses in Denmark has remained stable since 1991, but it has increased among the subgroup of homosexual men in recent years. This may reflect an actual increase in newly infected, e.g. as a result of increased risk behaviour, or it may reflect increased HIV....... MATERIALS AND METHODS: Observational study based on the Danish HIV Cohort Study, which includes all adults seen at Danish HIV clinics since 1995. RESULTS: From 2000 to 2004 the number of newly-infected homosexual men increased (from 69 to 123), particularly in persons under 30 years (from 5 to 42......). The median CD4 cell count at the time of diagnosis increased in this group (median 19.1 cells/microL per year [95% CI: 3.7-11.3]), while it remained stable among heterosexually infected. The number of newly-diagnosed homosexually infected under 30 years with a CD4 cell count over 400 cells/microL increased...

A new fully automated TLD badge reader

International Nuclear Information System (INIS)

Kannan, S.; Ratna, P.; Kulkarni, M.S.

2003-01-01

At present personnel monitoring in India is being carried out using a number of manual and semiautomatic TLD badge Readers and the BARC TL dosimeter badge designed during 1970. Of late the manual TLD badge readers are almost completely replaced by semiautomatic readers with a number of performance improvements like use of hot gas heating to reduce the readout time considerably. PC based design with storage of glow curve for every dosimeter, on-line dose computation and printout of dose reports, etc. However the semiautomatic system suffers from the lack of a machine readable ID code on the badge and the physical design of the dosimeter card not readily compatible for automation. This paper describes a fully automated TLD badge Reader developed in the RSS Division, using a new TLD badge with machine readable ID code. The new PC based reader has a built-in reader for reading the ID code, in the form of an array of holes, on the dosimeter card. The reader has a number of self-diagnostic features to ensure a high degree of reliability. (author)

On fully stressed design and p-norm measures in structural optimization

DEFF Research Database (Denmark)

Zhou, Mingdong; Sigmund, Ole

2017-01-01

This brief note revisits the fully stressed design schemes and p-norm measures used in stress-based structural optimization. Two simple shape optimization cases are used to remind the reader that fully stressed designs only are optimal when unimpeded by geometrical restrictions and that high valu...... of the stress norm are needed in order to achieve satisfactory designs....

Study on mid and long-term strategic plan formulation for newly-constructed NPP

International Nuclear Information System (INIS)

Song Lin

2014-01-01

Mid and Long-term strategic plan plays a key role for the management of a newly constructed nuclear power company. Among others, process, goals, and risk management, are the primary concerns during plan preparing. The article analyzed these three areas for Fuqing NPP, including the formulating process for the plan, the mid and long-term goal setting of the company, the major risk analysis and countermeasure selection therefore. Through that solutions and suggestions for strategic plan formulation were concluded for newly-constructed NPP. (author)

Survey on improvement in development of coal in Asia-Pacific region in fiscal 1998. Survey on optimization of coal transportation system in Kalimantan, Indonesia (South Kalimantan State); 1998 nendo Asia Taiheiyo sekitan kaihatsu kodoka chosa. Indonesia Karimantan ni okeru sekitan yuso system saitekika chosa (Minami Karimantan shu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Based on the June 1998 agreement with Indonesia on a comprehensive survey of the Kalimantan coal transportation system, plans for developing transportation infrastructures and coal mines were established, and a survey was carried out to realize efficient coal development and transportation. In proceeding with the future development of the South Kalimantan coal, it was made clear that the domestic Indonesian demand and export demand thereon can be fully expected, and latent supply capability thereto exists sufficiently. However, although the latent supply capability is available, the coal transportation infrastructures are insufficient, hence new construction of railways and coal shipping ports is necessary. The present survey has prepared an LP model for the coal transportation infrastructures, and performed case studies on six coal transportation scenarios composed of potential existing or new roads, waterways, railways and coal shipping ports. It was found promising economically that, for either case of domestic or export supply, Tg. Selatan port shall be newly built in addition to IBT port and NPLCT port, to link the ports by a railway network to be built newly. (NEDO)

Optimizing sgRNA position markedly improves the efficiency of CRISPR/dCas9-mediated transcriptional repression

DEFF Research Database (Denmark)

Radzisheuskaya, Aliaksandra; Shlyueva, Daria; Müller, Iris

2016-01-01

CRISPR interference (CRISPRi) represents a newly developed tool for targeted gene repression. It has great application potential for studying gene function and mapping gene regulatory elements. However, the optimal parameters for efficient single guide RNA (sgRNA) design for CRISPRi are not fully...

A new fully automatic PIM tool to replicate two component tungsten DEMO divertor parts

International Nuclear Information System (INIS)

Antusch, Steffen; Commin, Lorelei; Heneka, Jochen; Piotter, Volker; Plewa, Klaus; Walter, Heinz

2013-01-01

Highlights: • Development of a fully automatic 2C-PIM tool. • Replicate fusion relevant components in one step without additional brazing. • No cracks or gaps in the seam of the joining zone visible. • For both material combinations a solid bond of the material interface was achieved. • PIM is a powerful process for mass production as well as for joining even complex shaped parts. -- Abstract: At Karlsruhe Institute of Technology (KIT), divertor design concepts for future nuclear fusion power plants beyond ITER are intensively investigated. One promising KIT divertor design concept for the future DEMO power reactor is based on modular He-cooled finger units. The manufacturing of such parts by mechanical machining such as milling and turning, however, is extremely cost and time intensive because tungsten is very hard and brittle. Powder Injection Molding (PIM) has been adapted to tungsten processing at KIT since a couple of years. This production method is deemed promising in view of large-scale production of tungsten parts with high near-net-shape precision, hence, offering an advantage of cost-saving process compared to conventional machining. The properties of the effectively and successfully manufactured divertor part tile consisting only of pure tungsten are a microstructure without cracks and a high density (>98% T.D.). Based on the achieved results a new fully automatic multicomponent PIM tool was developed and allows the replication and joining without brazing of fusion relevant components of different materials in one step and the creation of composite materials. This contribution describes the process route to design and engineer a new fully automatic 2C-PIM tool, including the filling simulation and the implementing of the tool. The complete technological fabrication process of tungsten 2C-PIM, including material and feedstock (powder and binder) development, injection molding, and heat-treatment of real DEMO divertor parts is outlined

Measles: Make Sure Your Child Is Fully Immunized

Science.gov (United States)

... this? Submit What's this? Submit Button Past Emails Measles: Make Sure Your Child is Fully Immunized Language: ... also become infected if they are not protected. Measles in the U.S. From January 2 to March ...

PERFORMANCE OF NEWLY CONFIGURED SUBMERGED MEMBRANE BIOREACTOR FOR AEROBIC INDUSTRIAL WASTEWATER TREATMENT

Directory of Open Access Journals (Sweden)

I Gede Wenten

2012-02-01

Full Text Available The application of membrane to replace secondary clarifier of conventional activated sludge, known as membrane bioreactor, has led to a small footprint size of treatment with excellent effluent quality. The use of MBR eliminates almost all disadvantages encountered in conventional wastewater treatment plant such as low biomass concentration and washout of fine suspended solids. However, fouling remains as a main drawback. To minimize membrane fouling, a new configuration of submerged membrane bioreactor for aerobic industrial wastewater treatment has been developed. For the new configuration, a bed of porous particle is applied to cover the submerged ends-free mounted ultrafiltration membrane. Membrane performance was assessed based on flux productivity and selectivity. By using tapioca wastewater containing high organic matter as feed solution, reasonably high and stable fluxes around 11 l/m2.h were achieved with COD removal efficiency of more than 99%. The fouling analysis also shows that the newly configured ends-free membrane bioreactor exhibits lower irreversible resistance compared with the submerged one. In addition, the performance of pilot scale system, using a membrane module  with 10 m2 effective area and reactor tank with 120 L volume, was also assessed. The flux achieved from the pilot scale system around 8 l/m2.h with COD removal of more than 99%. Hence, this study has demonstrated the feasibility of the newly configured submerged ends-free MBR at larger scale.

‘BRICS without straw’? A systematic literature review of newly emerging economies’ influence in global health

Science.gov (United States)

2013-01-01

Background Since 2010, five newly emerging economies collectively known as ‘BRICS’ (Brazil, India, Russia, China and South Africa) have caught the imagination, and scholarly attention, of political scientists, economists and development specialists. The prospect of a unified geopolitical bloc, consciously seeking to re-frame international (and global) health development with a new set of ideas and values, has also, if belatedly, begun to attract the attention of the global health community. But what influence, if any, do the BRICS wield in global health, and, if they do wield influence, how has that influence been conceptualized and recorded in the literature? Methods We conducted a systematic literature review in (March-December 2012) of documents retrieved from the databases EMBASE, PubMed/Medline, Global Health, and Google Scholar, and the websites of relevant international organisations, research institutions and philanthropic organisations. The results were synthesised using a framework of influence developed for the review from the political science literature. Results Our initial search of databases and websites yielded 887 documents. Exclusion criteria narrowed the number of documents to 71 journal articles and 23 reports. Two researchers using an agreed set of inclusion criteria independently screened the 94 documents, leaving just 7 documents. We found just one document that provided sustained analysis of the BRICS’ collective influence; the overwhelming tendency was to describe individual BRICS countries influence. Although influence was predominantly framed by BRICS countries’ material capability, there were examples of institutional and ideational influence - particularly from Brazil. Individual BRICS countries were primarily ‘opportunity seekers’ and region mobilisers but with potential to become ‘issue leaders’ and region organisers. Conclusion Though small in number, the written output on BRICS influence in global health has

Maintaining Professional Commitment as a Newly Credentialed Athletic Trainer in the Secondary School Setting.

Science.gov (United States)

Mazerolle, Stephanie M; Myers, Sarah L; Walker, Stacy E; Kirby, Jessica

2018-03-01

  Professional commitment, or one's affinity and loyalty to a career, has become a topic of interest in athletic training. The expanding research on the topic, however, has omitted newly credentialed athletic trainers (ATs). For an impressionable group of practitioners, transitioning to clinical practice can be stressful.   To explore the professional commitment of newly credentialed ATs in the secondary school setting.   Secondary school.   Qualitative study.   A total of 31 newly credentialed ATs (6 men, 25 women; mean age = 24 ± 3 years) participated. Of these, 17 ATs (4 men, 13 women; mean age = 25 ± 4 years) were employed full time in the secondary school setting, and 14 ATs (2 men, 12 women; mean age = 23.0 ± 2.0 years) were graduate assistant students in the secondary school setting.   All participants completed semistructured interviews, which focused on their experiences in the secondary school setting and transitioning into the role and setting. Transcripts were analyzed using the phenomenologic approach. Creditability was established by peer review, member checks, and researcher triangulation.   Four main findings related to the professional commitment of newly credentialed ATs in the secondary school setting were identified. Work-life balance, professional relationships formed with the student-athletes, enjoyment gained from working in the secondary school setting, and professional responsibility emerged as factors facilitating commitment.   Affective commitment is a primary facilitator of professional commitment. Newly credentialed ATs who enjoy their jobs and have time to engage in nonwork roles are able to maintain a positive professional commitment. Our findings align with the previous literature and help strengthen our understanding that rejuvenation and passion are important to professional commitment.

Newly velocity field of Sulawesi Island from GPS observation

Science.gov (United States)

Sarsito, D. A.; Susilo, Simons, W. J. F.; Abidin, H. Z.; Sapiie, B.; Triyoso, W.; Andreas, H.

2017-07-01

Sulawesi microplate Island is located at famous triple junction area of the Eurasian, India-Australian, and Philippine Sea plates. Under the influence of the northward moving Australian plate and the westward motion of the Philippine plate, the island at Eastern part of Indonesia is collide and with the Eurasian plate and Sunda Block. Those recent microplate tectonic motions can be quantitatively determine by GNSS-GPS measurement. We use combine GNSS-GPS observation types (campaign type and continuous type) from 1997 to 2015 to derive newly velocity field of the area. Several strategies are applied and tested to get the optimum result, and finally we choose regional strategy to reduce error propagation contribution from global multi baseline processing using GAMIT/GLOBK 10.5. Velocity field are analyzed in global reference frame ITRF 2008 and local reference frame by fixing with respect alternatively to Eurasian plate - Sunda block, India-Australian plate and Philippine Sea plates. Newly results show dense distribution of velocity field. This information is useful for tectonic deformation studying in geospatial era.

A fully organic retinal prosthesis restores vision in a rat model of degenerative blindness

Science.gov (United States)

Maya-Vetencourt, José Fernando; Ghezzi, Diego; Antognazza, Maria Rosa; Colombo, Elisabetta; Mete, Maurizio; Feyen, Paul; Desii, Andrea; Buschiazzo, Ambra; di Paolo, Mattia; di Marco, Stefano; Ticconi, Flavia; Emionite, Laura; Shmal, Dmytro; Marini, Cecilia; Donelli, Ilaria; Freddi, Giuliano; Maccarone, Rita; Bisti, Silvia; Sambuceti, Gianmario; Pertile, Grazia; Lanzani, Guglielmo; Benfenati, Fabio

2017-06-01

The degeneration of photoreceptors in the retina is one of the major causes of adult blindness in humans. Unfortunately, no effective clinical treatments exist for the majority of retinal degenerative disorders. Here we report on the fabrication and functional validation of a fully organic prosthesis for long-term in vivo subretinal implantation in the eye of Royal College of Surgeons rats, a widely recognized model of retinitis pigmentosa. Electrophysiological and behavioural analyses reveal a prosthesis-dependent recovery of light sensitivity and visual acuity that persists up to 6-10 months after surgery. The rescue of the visual function is accompanied by an increase in the basal metabolic activity of the primary visual cortex, as demonstrated by positron emission tomography imaging. Our results highlight the possibility of developing a new generation of fully organic, highly biocompatible and functionally autonomous photovoltaic prostheses for subretinal implants to treat degenerative blindness.