WorldWideScience

Sample records for network technology ethernet

  1. High capacity carrier ethernet transport networks

    DEFF Research Database (Denmark)

    Rasmussen, Anders; Zhang, Jiang; Yu, Hao

    2009-01-01

    Ethernet as a transport technology has, up to now, lacked the features such as network layer architecture, customer separation and manageability that carriers require for wide-scale deployment. However, with the advent of PBB-TE and T-MPLS, it is now possible to use Ethernet as a transport techno...... rate (BER) measurements on the aggregated 100G stream.......Ethernet as a transport technology has, up to now, lacked the features such as network layer architecture, customer separation and manageability that carriers require for wide-scale deployment. However, with the advent of PBB-TE and T-MPLS, it is now possible to use Ethernet as a transport...... technology, making the use of Ethernet as a convergence layer for Next Generation Networks a distinct possibility. Triple Play services, in particular IPTV, are expected to be a main drivers for carrier Ethernet, however, a number of challenges must be addressed including QoS enabled control plane, enhanced...

  2. Towards 100 gigabit carrier ethernet transport networks

    DEFF Research Database (Denmark)

    Rasmussen, Anders; Zhang, Jiang; Yu, Hao

    2010-01-01

    Ethernet as a transport technology has, up to now, lacked the features such as network layer architecture, customer separation and manageability that carriers require for wide-scale deployment. However, with the advent of PBB-TE and TMPLS, it is now possible to use Ethernet as a transport technol...... rate (BER) measurements on the aggregated 100G stream.......Ethernet as a transport technology has, up to now, lacked the features such as network layer architecture, customer separation and manageability that carriers require for wide-scale deployment. However, with the advent of PBB-TE and TMPLS, it is now possible to use Ethernet as a transport...... technology, making the use of Ethernet as a convergence layer for Next Generation Networks a distinct possibility. Triple Play services, in particular IPTV, are expected to be a main drivers for carrier Ethernet, however, a number of challenges must be addressed including QoS enabled control plane, enhanced...

  3. Reliability in automotive ethernet networks

    DEFF Research Database (Denmark)

    Soares, Fabio L.; Campelo, Divanilson R.; Yan, Ying

    2015-01-01

    This paper provides an overview of in-vehicle communication networks and addresses the challenges of providing reliability in automotive Ethernet in particular.......This paper provides an overview of in-vehicle communication networks and addresses the challenges of providing reliability in automotive Ethernet in particular....

  4. Upgrade of Spring-8 Beamline Network with Vlan Technology Over Gigabit Ethernet

    OpenAIRE

    Ishii, M; Fukui, T.; Furukawa, Y.; Nakatani, T; Ohata, T.; Tanaka, R.

    2001-01-01

    The beamline network system at SPring-8 consists of three LANs; a BL-LAN for beamline component control, a BL-USER-LAN for beamline experimental users and an OA-LAN for the information services. These LANs are interconnected by a firewall system. Since the network traffic and the number of beamlines have increased, we upgraded the backbone of BL-USER-LAN from Fast Ethernet to Gigabit Ethernet. And then, to establish the independency of a beamline and to raise flexibility of every beamline, we...

  5. Provision of metro ethernet services using a reconfigurable photonic access network

    NARCIS (Netherlands)

    Roy, R.; van Etten, Wim

    2007-01-01

    The paper proposes a design for traffic engineering to provide Ethernet services using an extended access network. Ethernet has remained the dominant technology for Local Area and Enterprise Networks, the use of Ethernet in metro networks has seen significant interest of late to provide for end to

  6. Low Cost Network Emulator with Ethernet and E1 Interfaces

    Directory of Open Access Journals (Sweden)

    Zbynek Kocur

    2010-01-01

    Full Text Available Contemporary Next Generation Networks (NGN are mainly built on the Internet Protocol (IP and Ethernet. Major challenge for emerging types of wired and wireless IP-based networks is to provide an adequate Quality of Service (QoS for different services. The quality of evaluation requires a detailed knowledge of the performance requirements for particular services and applications. The paper is primarily oriented to the end-to-end testing for the Ethernet-based terminal equipment. The low cost Ethernet network emulator was developed on the Department of Telecommunication Technology of the Faculty of Electrical Engineering of the Czech Technical University in Prague. The extension for emulation network with the E1 interfaces and TDM over IP transmission can be used with external converters.

  7. A rapid protection switching method in carrier ethernet ring networks

    Science.gov (United States)

    Yuan, Liang; Ji, Meng

    2008-11-01

    Abstract: Ethernet is the most important Local Area Network (LAN) technology since more than 90% data traffic in access layer is carried on Ethernet. From 10M to 10G, the improving Ethernet technology can be not only used in LAN, but also a good choice for MAN even WAN. MAN are always constructed in ring topology because the ring network could provide resilient path protection by using less resource (fibre or cable) than other network topologies. In layer 2 data networks, spanning tree protocol (STP) is always used to protect transmit link and preventing the formation of logic loop in networks. However, STP cannot guarantee the efficiency of service convergence when link fault happened. In fact, convergent time of networks with STP is about several minutes. Though Rapid Spanning Tree Protocol (RSTP) and Multi-Spanning Tree Protocol (MSTP) improve the STP technology, they still need a couple of seconds to achieve convergence, and can not provide sub-50ms protection switching. This paper presents a novel rapid ring protection method (RRPM) for carrier Ethernet. Unlike other link-fault detection method, it adopts distributed algorithm to detect link fault rapidly (sub-50ms). When networks restore from link fault, it can revert to the original working state. RRPM can provide single ring protection and interconnected ring protection without the formation of super loop. In normal operation, the master node blocks the secondary port for all non-RRPM Ethernet frames belonging to the given RRPM Ring, thereby avoiding a loop in the ring. When link fault happens, the node on which the failure happens moves from the "ring normal" state to the "ring fault" state. It also sends "link down" frame immediately to other nodes and blocks broken port and flushes its forwarding database. Those who receive "link down" frame will flush forwarding database and master node should unblock its secondary port. When the failure restores, the whole ring will revert to the normal state. That is

  8. Switched DWDM ethernet passive optical networks

    NARCIS (Netherlands)

    Roy, R.; Roeloffzen, C.G.H.; van Etten, Wim

    2006-01-01

    The IEEE Ethernet Passive Optical Networks (EPON) standard is a leading Time Division Multiplex (TDM) standard for PONs. The paper investigates the operation of an EPON based system in a Dense Wavelength Division Multiplex (DWDM) environment. It extends the concept of a multi-wavelength system from

  9. IP, ethernet and MPLS networks resource and fault management

    CERN Document Server

    Perez, André

    2013-01-01

    This book summarizes the key Quality of Service technologies deployed in telecommunications networks: Ethernet, IP, and MPLS. The QoS of the network is made up of two parts: fault and resource management. Network operation quality is among the functions to be fulfilled in order to offer QoS to the end user. It is characterized by four parameters: packet loss, delay, jitter or the variation of delay over time, and availability. Resource management employs mechanisms that enable the first three parameters to be guaranteed or optimized. Fault management aims to ensure continuity of service.

  10. IPTV traffic management using topology-based hierarchical scheduling in Carrier Ethernet transport networks

    DEFF Research Database (Denmark)

    Yu, Hao; Yan, Ying; Berger, Michael Stubert

    2009-01-01

    Carrier Ethernet is becoming a favorable access technology for Next Generation Network (NGN). The features of cost-efficiency, operation flexibility and high bandwidth have a great attraction to service providers. However, to achieve these characteristics, Carrier Ethernet needs to have Quality o....... This work has been carried out as a part of the research project HIPT (High quality IP network for IPTV and VoIP) founded by Danish Advanced Technology Foundation....

  11. Building a Reliable Onboard Network with Ethernet: A GSFC Prototype

    Science.gov (United States)

    Marquart, Jane

    2004-01-01

    This viewgraph presentation discusses the architecture of an Ethernet-based communication network for spacecraft. The presentation also contains information on data link reliability, PDU formats, and NIC/OS Measurements.

  12. SynUTC - high precision time synchronization over ethernet networks

    CERN Document Server

    Höller, R; Horauer, M; Kerö, N; Schmid, U; Schossmaier, K

    2002-01-01

    This article describes our SynUTC (Synchronized Universal Time Coordinated) technology, which enables high-accuracy distribution of GPS time and time synchronization of network nodes connected via standard Ethernet LANs. By means of exchanging data packets in conjunction with moderate hardware support at nodes and switches, an overall worst-case accuracy in the range of some 100 ns can be achieved, with negligible communication overhead. Our technology thus improves the 1 ms-range accuracy achievable by conventional, software-based approaches like NTP by 4 orders of magnitude. Applications can use the high-accuracy global time provided by SynUTC for event timestamping and event generation both at hardware and software level. SynUTC is based upon inserting highly accurate time information into dedicated data packets at the media-independent interface (MII) between the physical layer transceiver and the network controller upon packet transmission and reception, respectively. As a consequence, every node has acc...

  13. Simulation and Evaluation of Ethernet Passive Optical Network

    Directory of Open Access Journals (Sweden)

    Salah A. Jaro Alabady

    2013-05-01

    Full Text Available      This paper studies simulation and evaluation of Ethernet Passive Optical Network (EPON system, IEEE802.3ah based OPTISM 3.6 simulation program. The simulation program is used in this paper to build a typical ethernet passive optical network, and to evaluate the network performance when using the (1580, 1625 nm wavelength instead of (1310, 1490 nm that used in Optical Line Terminal (OLT and Optical Network Units (ONU's in system architecture of Ethernet passive optical network at different bit rate and different fiber optic length. The results showed enhancement in network performance by increase the number of nodes (subscribers connected to the network, increase the transmission distance, reduces the received power and reduces the Bit Error Rate (BER.   

  14. Synchronous Ethernet- Considerations and Implementation of the Packet Network Management Scheme

    Science.gov (United States)

    Gundale, A. S.; Aradhye, Ashwini

    2010-11-01

    Packet technologies were designed to work in asynchronous mode, where the oscillators in the equipment are free running. Although this allows the underlying infrastructure to operate, many applications exist that require frequency synchronization. Also, the ability to distribute synchronization from center to edge of network declines as infrastructure evolves toward a packet-based architecture. Synchronous Ethernet (SyncE) is a key development of the evolution of Ethernet into a carrier grade technology suitable for the WAN environment where frequency synchronization is required. The time of the day distribution in synchronized network at the physical layer enables many useful propositions in packet handling policies and other network management aspects.

  15. Ethernet Networks for Real-Time Use in the ATLAS Experiment

    CERN Document Server

    Meirosu, C; Martin, B

    2005-01-01

    Ethernet became today's de-facto standard technology for local area networks. Defined by the IEEE 802.3 and 802.1 working groups, the Ethernet standards cover technologies deployed at the first two layers of the OSI protocol stack. The architecture of modern Ethernet networks is based on switches. The switches are devices usually built using a store-and-forward concept. At the highest level, they can be seen as a collection of queues and mathematically modelled by means of queuing theory. However, the traffic profiles on modern Ethernet networks are rather different from those assumed in classical queuing theory. The standard recommendations for evaluating the performance of network devices define the values that should be measured but do not specify a way of reconciling these values with the internal architecture of the switches. The introduction of the 10 Gigabit Ethernet standard provided a direct gateway from the LAN to the WAN by the means of the WAN PHY. Certain aspects related to the actual use of WAN ...

  16. Network congestion can be controlled: Routing algorithms in optical networks and Ethernets

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, L.A.; MacKenzie, P.D.; Greenberg, D.S.

    1997-12-01

    Congestion and contention can greatly reduce the effective performance of an interconnection network. This report gathers together research done under a Laboratory Research and Development Program (LDRD) project at Sandia National Laboratories. The goal of the project was to explore the contention properties of novel optical interconnects. In the process of exploring optical interconnects the project also gained new insights into the use of backoff protocols in the current dominant interconnect technology, Ethernet.

  17. Next generation network based carrier ethernet test bed for IPTV traffic

    DEFF Research Database (Denmark)

    Fu, Rong; Berger, Michael Stübert; Zheng, Yu

    2009-01-01

    This paper presents a Carrier Ethernet (CE) test bed based on the Next Generation Network (NGN) framework. After the concept of CE carried out by Metro Ethernet Forum (MEF), the carrier-grade Ethernet are obtaining more and more interests and being investigated as the low cost and high performance...... services of transport network to carry the IPTV traffic. This test bed is approaching to support the research on providing a high performance carrier-grade Ethernet transport network for IPTV traffic....

  18. A Meta Analysis of Gigabit Ethernet over Copper Solutions for Cluster-Networking

    OpenAIRE

    Hoefler, Torsten; Rehm, Wolfgang

    2005-01-01

    The IEEE Standard for Gigabit Networking was accepted in June 1998 and ratified as IEEE 802.3z. This standard uses considers an optical cable for signal transmission. One year later a new standard for Gigabit Ethernet over unshielded twisted pair of the 5th category was certified under the name 802.3ab. Nowadays, there are a couple of younger and older studies about Gigabit Ethernet technology and performance. This Meta Analysis is intended to put the main results altogether into one document...

  19. Using a Control System Ethernet Network as a Field Bus

    CERN Document Server

    De Van, William R; Lawson, Gregory S; Wagner, William H; Wantland, David M; Williams, Ernest

    2005-01-01

    A major component of a typical accelerator distributed control system (DCS) is a dedicated, large-scale local area communications network (LAN). The SNS EPICS-based control system uses a LAN based on the popular IEEE-802.3 set of standards (Ethernet). Since the control system network infrastructure is available throughout the facility, and since Ethernet-based controllers are readily available, it is tempting to use the control system LAN for "fieldbus" communications to low-level control devices (e.g. vacuum controllers; remote I/O). These devices may or may not be compatible with the high-level DCS protocols. This paper presents some of the benefits and risks of combining high-level DCS communications with low-level "field bus" communications on the same network, and describes measures taken at SNS to promote compatibility between devices connected to the control system network.

  20. Measurement of switching latency in high data rate Ethernet networks

    OpenAIRE

    Hegr, Tomáš; Vozňák, Miroslav; Kozák, Miloš; Boháč, Leoš

    2015-01-01

    The paper deals with a methodology of switching latency measurement in switched Ethernet networks. The switching latency is parameter necessary for simulation and design of low-latency networks that are often intended for realtime control inherent to many industrial applications. The proposed measurement methodology provides a simple way of switching the latency determination and vendor quoted latency values verification directly at the physical layer. Numerous experimental measurements...

  1. Personal computers on Ethernet

    Science.gov (United States)

    Kao, R.

    1988-01-01

    Many researchers in the Division have projects which require transferring large files between their personal computers (PC) and VAX computers in the Laboratory for Oceans Computing Facility (LOCF). Since Ethernet local area network provides high speed communication channels which make file transfers (among other capabilities) practical, a network plan was assembled to connect IBM and IBM compatible PC's to Ethernet for participating personnel. The design employs ThinWire Ethernet technology. A simplified configuration diagram is shown. A DEC multiport repeater (DEMPR) is used for connection of ThinWire Ethernet segments. One port of DEMPR is connected to a H4000 transceiver and the transceiver is clamped onto the Goddard Ethernet backbonecoaxial cable so that the PC's can be optionally on the SPAN network. All these common elements were successfully installed and tested.

  2. Fault Tolerant Ethernet Based Network for Time Sensitive Applications in Electrical Power Distribution Systems

    Directory of Open Access Journals (Sweden)

    Leos Bohac

    2013-01-01

    Full Text Available The paper analyses and experimentally verifies deployment of Ethernet based network technology to enable fault tolerant and timely exchange of data among a number of high voltage protective relays that use proprietary serial communication line to exchange data in real time on a state of its high voltage circuitry facilitating a fast protection switching in case of critical failures. The digital serial signal is first fetched into PCM multiplexer where it is mapped to the corresponding E1 (2 Mbit/s time division multiplexed signal. Subsequently, the resulting E1 frames are then packetized and sent through Ethernet control LAN to the opposite PCM demultiplexer where the same but reverse processing is done finally sending a signal into the opposite protective relay. The challenge of this setup is to assure very timely delivery of the control information between protective relays even in the cases of potential failures of Ethernet network itself. The tolerance of Ethernet network to faults is assured using widespread per VLAN Rapid Spanning Tree Protocol potentially extended by 1+1 PCM protection as a valuable option.

  3. Extreme Networks' 10-Gigabit Ethernet enables

    CERN Multimedia

    2002-01-01

    " Extreme Networks, Inc.'s 10-Gigabit switching platform enabled researchers to transfer one Terabyte of information from Vancouver to Geneva across a single network hop, the world's first large-scale, end-to-end transfer of its kind" (1/2 page).

  4. Use of modeling to assess the scalability of Ethernet networks for the ATLAS second level trigger

    CERN Document Server

    Korcyl, K; Dobinson, Robert W; Saka, F

    1999-01-01

    The second level trigger of LHC's ATLAS experiment has to perform real-time analyses on detector data at 10 GBytes/s. A switching network is required to connect more than thousand read-out buffers to about thousand processors that execute the trigger algorithm. We are investigating the use of Ethernet technology to build this large switching network. Ethernet is attractive because of the huge installed base, competitive prices, and recent introduction of the high-performance Gigabit version. Due to the network's size it has to be constructed as a layered structure of smaller units. To assess the scalability of such a structure we evaluated a single switch unit. (0 refs).

  5. Migration of optical core network to next generation networks - Carrier Grade Ethernet Optical Transport Network

    Science.gov (United States)

    Glamočanin, D.

    2017-05-01

    In order to maintain the continuity of the telecom operators’ network construction, while monitoring development needs, increasing customers’ demands and application of technological improvements, it is necessary to migrate optical transport core network to the next generation networks - Carrier Grade Ethernet Optical Transport Network (OTN CE). The primary objective of OTN CE is to realize an environment that is based solely on the switching in the optical domain, i.e. the realization of transparent optical networks and optical switching to the second layer of ISO / OSI model. The realization of such a network provides opportunities for further development of existing, but also technologically more demanding, new services. It is also a prerequisite to provide higher scalability, reliability, security and quality of QoS service, as well as prerequisites for the establishment of SLA (Service Level Agreement) for existing services, especially traffic in real time. This study aims to clarify the proposed model, which has the potential to be eventually adjusted in accordance with new scientific knowledge in this field as well as market requirements.

  6. Enterasys Networks delivers standards-based 10-Gigabit ethernet modules for its Enterasys X-Pedition Routers and Enterasys Matrix Switches

    CERN Multimedia

    2002-01-01

    Enterasys Networks Inc. has announced new 10-Gigabit Ethernet modules for the Enterasys X-Pedition ER16 routers and Enterasys Matrix E1 OAS (Optical Access Switch). The addition of 10-Gigabit Ethernet technology enables the Enterasys X-Pedition ER16 enables real-time delivery of high-bandwidth, advanced applications across local area network (LAN), wide area network (WAN) and metropolitan area network (MAN) environments (1/2 page).

  7. Overflow control mechanism (OCM) for Ethernet passive optical networks (EPONs)

    Science.gov (United States)

    Hajduczenia, Marek; da Silva, Henrique J. A.; Monteiro, Paulo P.

    2007-05-01

    The nonfragmentable nature of Ethernet data frames, as well as operation of the priority oriented packet schedulers in the optical network units, in conjunction with heavy network load conditions and the lack of detailed knowledge about the queue's composition at the optical line terminal (OLT) level, result in the creation of upstream channel slot remainders. The existing methods, in the form of nonpreemptive packet schedulers and multithreshold reporting process defined vaguely by the IEEE 802.3-2005 standard, result in either increased packet delay or Ethernet passive optical network (EPON) system incompatibility, respectively, since threshold processing was never officially defined in the scope of the respective EPON standard. We propose an alternative approach, based on basic modifications of the standard and extended GATE multipoint control protocol data unit format and meaning, allowing for the OLT packet scheduling agent to grant always exactly the requested slot size, thus preventing creation of any upstream channel slot remainders. It is estimated that, on average, ˜3% of upstream channel bandwidth can be salvaged when slot remainders are absent in the upstream channel transmission.

  8. Towards Terabit Carrier Ethernet and Energy Efficient Optical Transport Networks

    DEFF Research Database (Denmark)

    Rasmussen, Anders

    error correction and energy efficiency. Scheduling and address lookup are key functions and potential bottle necks in high speed network nodes, as the minimum packet/frame sizes in both the popular Ethernet protocol, as well as the Internet Protocol (IP) still remains constant (84B and 40B, respectively...... to squeeze more traffic onto the existing physical transmission systems. To do this, while keeping the bit error rate (BER) below acceptable levels, more advanced FEC schemes are required. This is a challenge: Not only do we need to increase the processing speed of the FEC to handle the higher throughputs....... The more advanced schemes also require more complex calculations to process each bit. This thesis will investigate how both the standard OTN FEC as well as more advanced FEC schemes can be implemented for 100G and above operation. As the networks are expanded to run at increasingly higher speeds...

  9. Gigabit Ethernet: A Technical Assessment.

    Science.gov (United States)

    Axner, David

    1997-01-01

    Describes gigabit ethernet for LAN (local area network) technology that will expand ethernet bandwidth. Technical details are discussed, including protocol stacks, optical fiber, deployment strategy for performance improvement, ATM (Asynchronous Transfer Mode), real-time protocol, reserve reservation protocol, and standards. (LRW)

  10. Delay Analysis of Networked Control Systems Based on 100 M Switched Ethernet

    Science.gov (United States)

    2014-01-01

    For the delay may degrade the performance of networked control systems, networked control systems based on 100 M switched Ethernet are proposed in this paper. According to the working principle of Ethernet switch, the formulas of the upper bound delay of the single-level switched Ethernet and the multiple-level switched Ethernet are deduced by the timing diagram method, and the values of the upper bound delay are also given. The key factors that influence the upper bound delay of switched Ethernet are analyzed; then, the characteristics of the upper bound delay are presented, which show that the delay induced by the single-level 100 M switched Ethernet has little effect on the performance of control systems, while the delay induced by the multiple-level 100 M switched Ethernet may meet the time requirements of all classes of control systems if the numbers of levels and the numbers of nodes connecting to switches are set properly. Finally, the performance of networked control systems is simulated by TrueTime, and the results further show the feasibility and superiority of 100 M switched Ethernet based networked control systems without modification of the network protocols. PMID:25003152

  11. Synchronous ethernet and IEEE 1588 in telecoms next generation synchronization networks

    CERN Document Server

    2013-01-01

    This book addresses the multiple technical aspects of the distribution of synchronization in new generation telecommunication networks, focusing in particular on synchronous Ethernet and IEEE1588 technologies. Many packet network engineers struggle with understanding the challenges that precise synchronization distribution can impose on networks. The usual “why”, “when” and particularly “how” can cause problems for many engineers. In parallel to this, some other markets have identical synchronization requirements, but with their own design requirements, generating further questions. This book attempts to respond to the different questions by providing background technical information. Invaluable information on state of-the-art packet network synchronization and timing architectures is provided, as well as an unbiased view on the synchronization technologies that have been internationally standardized over recent years, with the aim of providing the average reader (who is not skilled in the art) wi...

  12. Comparison of High Performance Network Options: EDR InfiniBand vs.100Gb RDMA Capable Ethernet

    Energy Technology Data Exchange (ETDEWEB)

    Kachelmeier, Luke Anthony [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Univ. of New Mexico, Albuquerque, NM (United States); Van Wig, Faith Virginia [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Missouri Univ. of Science and Technology, Rolla, MO (United States); Erickson, Kari Natania [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); New Mexico Inst. of Mining and Technology, Socorro, NM (United States)

    2016-08-08

    These are the slides for a presentation at the HPC Mini Showcase. This is a comparison of two different high performance network options: EDR InfiniBand and 100Gb RDMA capable ethernet. The conclusion of this comparison is the following: there is good potential, as shown with the direct results; 100Gb technology is too new and not standardized, thus deployment effort is complex for both options; different companies are not necessarily compatible; if you want 100Gb/s, you must get it all from one place.

  13. Carrier ethernet network control plane based on the Next Generation Network

    DEFF Research Database (Denmark)

    Fu, Rong; Wang, Yanmeng; Berger, Michael Stubert

    2008-01-01

    architecture. The approaches to QoS mapping, label distribution and connection and admission control (CAC) are specified here. At last, a simple T-MPLS based Carrier Ethernet network model with three kinds of users (VoIP, VoD and HTTP) and a RACE based control module is simulated in OPNET. The model is aiming...

  14. Quality of service modeling and analysis for carrier ethernet

    NARCIS (Netherlands)

    Malhotra, R.

    2008-01-01

    Today, Ethernet is moving into the mainstream evolving into a carrier grade technology. Termed as Carrier Ethernet it is expected to overcome most of the shortcomings of native Ethernet. It is envisioned to carry services end-to-end serving corporate data networking and broadband access demands as

  15. Carrier Ethernet OAM: An Overview and Comparison to IP OAM

    NARCIS (Netherlands)

    Hofstede, Rick; Hofstede, R.J.; Drago, Idilio; Moreira Moura, Giovane; Pras, Aiko

    Ethernet has evolved from a local area to a wide area network technology. When it is used in a service provider environment, it has more complex requirements, which demand a set of management techniques for the Ethernet layer. Ethernet OAM comprises a set of management techniques for Carrier (or

  16. Transport Network Technologies – Study and Testing

    DEFF Research Database (Denmark)

    Bozorgebrahimi, K.; Channegowda, M.; Colmenero, A.

    Following on from the theoretical research into Carrier Class Transport Network Technologies (CCTNTs) documented in DJ1.1.1, this report describes the extensive testing performed by JRA1 Task 1. The tests covered EoMPLS, Ethernet OAM, Synchronous Ethernet, PBB-TE, MPLS-TP, OTN and GMPLS, and the ......Following on from the theoretical research into Carrier Class Transport Network Technologies (CCTNTs) documented in DJ1.1.1, this report describes the extensive testing performed by JRA1 Task 1. The tests covered EoMPLS, Ethernet OAM, Synchronous Ethernet, PBB-TE, MPLS-TP, OTN and GMPLS...

  17. Communication Network Architectures Based on Ethernet Passive Optical Network for Offshore Wind Power Farms

    Directory of Open Access Journals (Sweden)

    Mohamed A. Ahmed

    2016-03-01

    Full Text Available Nowadays, with large-scale offshore wind power farms (WPFs becoming a reality, more efforts are needed to maintain a reliable communication network for WPF monitoring. Deployment topologies, redundancy, and network availability are the main items to enhance the communication reliability between wind turbines (WTs and control centers. Traditional communication networks for monitoring and control (i.e., supervisory control and data acquisition (SCADA systems using switched gigabit Ethernet will not be sufficient for the huge amount of data passing through the network. In this paper, the optical power budget, optical path loss, reliability, and network cost of the proposed Ethernet Passive Optical Network (EPON-based communication network for small-size offshore WPFs have been evaluated for five different network architectures. The proposed network model consists of an optical network unit device (ONU deployed on the WT side for collecting data from different internal networks. All ONUs from different WTs are connected to a central optical line terminal (OLT, placed in the control center. There are no active electronic elements used between the ONUs and the OLT, which reduces the costs and complexity of maintenance and deployment. As fiber access networks without any protection are characterized by poor reliability, three different protection schemes have been configured, explained, and discussed. Considering the cost of network components, the total implementation expense of different architectures with, or without, protection have been calculated and compared. The proposed network model can significantly contribute to the communication network architecture for next generation WPFs.

  18. Efficient Bandwidth Management for Ethernet Passive Optical Networks

    KAUST Repository

    Elrasad, Amr Elsayed M.

    2016-05-15

    The increasing bandwidth demands in access networks motivates network operators, networking devices manufacturers, and standardization institutions to search for new approaches for access networks. These approaches should support higher bandwidth, longer distance between end user and network operator, and less energy consumption. Ethernet Passive Optical Network (EPON) is a favorable choice for broadband access networks. EPONs support transmission rates up to 10 Gbps. EPONs also support distance between end users and central office up to 20 Km. Moreover, optical networks have the least energy consumption among all types of networks. In this dissertation, we focus on reducing delay and saving energy in EPONs. Reducing delay is essential for delay-sensitive traffic, while minimizing energy consumption is an environmental necessity and also reduces the network operating costs. We identify five challenges, namely excess bandwidth allocation, frame delineation, congestion resolution, large round trip time delay in long-reach EPONs (LR-EPONs), and energy saving. We provide a Dynamic Bandwidth Allocation (DBA) approach for each challenge. We also propose a novel scheme that combines the features of the proposed approaches in one highly performing scheme. Our approach is to design novel DBA protocols that can further reduce the delay and be simultaneously simple and fair. We also present a dynamic bandwidth allocation scheme for Green EPONs taking into consideration maximizing energy saving under target delay constraints. Regarding excess bandwidth allocation, we develop an effective DBA scheme called Delayed Excess Scheduling (DES). DES achieves significant delay and jitter reduction and is more suitable for industrial deployment due to its simplicity. Utilizing DES in hybrid TDM/WDM EPONs (TWDM-EPONs) is also investigated. We also study eliminating the wasted bandwidth due to frame delineation. We develop an interactive DBA scheme, Efficient Grant Sizing Interleaved

  19. Providing resilience for carrier ethernet multicast traffic

    DEFF Research Database (Denmark)

    Ruepp, Sarah Renée; Wessing, Henrik; Zhang, Jiang

    2009-01-01

    This paper presents an overview of the Carrier Ethernet technology with specific focus on resilience. In particular, we detail how multicast traffic, which is essential for e.g. IPTV can be protected. We present Carrier Ethernet resilience methods for linear and ring networks and show by simulati...

  20. New Ethernet Based Optically Transparent Network for Fiber-to-the-Desk Application

    NARCIS (Netherlands)

    Radovanovic, Igor; van Etten, Wim

    2003-01-01

    We present a new optical local area network architecture based on multimode optical fibers and components, short wavelength lasers and detectors and the widely used fast Ethernet protocol. The presented optically transparent network represent a novel approach in fiber-to-the-desk applications. It is

  1. Enterasys Networks delivers 10-Gigabit ethernet for the enterprise with new matrix E1 switching family

    CERN Multimedia

    2001-01-01

    Enterasys Networks Inc., today announced its new Matrix E1 family of 10-Gigabit and Gigabit Ethernet switches. The Matrix E1 Optical Access Switch (OAS) enables organizations to deliver applications at 10-Gb speeds across a single fibre optic pair. Jacques Altaber, deputy leader of IT at CERN said "High-bandwith solutions are essential to leveraging more computing power, so 10-Gb Ethernet is the next logical step for us...The Matrix E1 allows us to provide the networking support that our scientists need and gives us a certain future for bandwidth and computing expansion".

  2. Overview of Activities Involving Time Triggered Ethernet Technology Carried out by ESA ESTEC

    Science.gov (United States)

    Szewczyk, Tomasz; Guettache, Farid; Kollias, Vangelis; Plettner, Cristina; Schramm, Arne; Stallkamp, Erik

    2016-08-01

    Time Triggered Ethernet (TTE), as a safety oriented bus, is a potential candidate to become a new solution for the main avionics bus for launchers and manned missions. The decision to use TTE was already made for two significant projects: NASA-Orion and Ariane 6 launcher. For that reason, certain effort should be made to introduce and to mature the TTE technology in the European space sector.The current article will presents an overview of the Time Triggered Ethernet related activities managed by ESA ESTEC. A short description of the on-going activities will provide current development status of the key technological aspects of TTE.

  3. Testing and Modeling Ethernet Switches and Networks for Use in ATLAS High-level Triggers

    CERN Document Server

    Dobinson, Robert W; Korcyl, K; Le Vine, M J; Lokier, J; Martin, B; Meirosu, C; Saka, F; Vella, K

    2001-01-01

    The ATLAS second level trigger will use a multi-layered LAN network to transfer 5 Gbyte/s detector data from ~1500 buffers to a few hundred processors. A model of the network has been constructed to evaluate its performance. A key component of the network model is a model of an individual switch, reproducing the behavior measured in real devices. A small number of measurable parameters are used to model a variety of commercial Ethernet switches. Using parameters measured on real devices, the impact on the overall network performance is modeled. In the Atlas context, both 100 Mbit and Gigabit Ethernet links are required. A system is described which is capable of characterizing the behavior of commercial switches with the required number of nodes under traffic conditions resembling those to be encountered in the Atlas experiment. Fast Ethernet traffic is provided by a high density, custom built tester based on FPGAs, programmed in Handel-C and VHDL, while the Gigabit Ethernet traffic is generated using Alteon N...

  4. Time synchronization for an Ethernet-based real-time token network

    NARCIS (Netherlands)

    Hanssen, F.T.Y.; van den Boom, Joost; Jansen, P.G.; Scholten, Johan

    We present a distributed clock synchronization algorithm. It performs clock synchronization on an Ethernet-based real-time token local area network, without the use of an external clock source. It is used to enable the token schedulers in each node to agree upon a common time. Its intended use is in

  5. Ethernet Based Passive Optical Local Area Networks for Fiber-to-the-Desk Application

    NARCIS (Netherlands)

    Radovanovic, Igor; van Etten, Wim; Freriks, Hennie

    2003-01-01

    We introduce optical local-area network (LAN) architectures based on multimode optical fiber and components, short wavelength lasers and detectors, and the widely used fast Ethernet protocol. These architectures are designed to lower the costs associated with passive optical LAN implementation.

  6. Proposal for tutorial: Resilience in carrier Ethernet transport

    DEFF Research Database (Denmark)

    Berger, Michael Stübert; Wessing, Henrik; Ruepp, Sarah Renée

    2009-01-01

    This tutorial addresses how Carrier Ethernet technologies can be used in the transport network to provide resilience to the packet layer. Carrier Ethernet networks based on PBB-TE and T-MPLS/MPLS-TP are strong candidates for reliable transport of triple-play services. These technologies offer...

  7. Impact Analysis of Flow Shaping in Ethernet-AVB/TSN and AFDX from Network Calculus and Simulation Perspective.

    Science.gov (United States)

    He, Feng; Zhao, Lin; Li, Ershuai

    2017-05-22

    Ethernet-AVB/TSN (Audio Video Bridging/Time-Sensitive Networking) and AFDX (Avionics Full DupleX switched Ethernet) are switched Ethernet technologies, which are both candidates for real-time communication in the context of transportation systems. AFDX implements a fixed priority scheduling strategy with two priority levels. Ethernet-AVB/TSN supports a similar fixed priority scheduling with an additional Credit-Based Shaper (CBS) mechanism. Besides, TSN can support time-triggered scheduling strategy. One direct effect of CBS mechanism is to increase the delay of its flows while decreasing the delay of other priority ones. The former effect can be seen as the shaping restriction and the latter effect can be seen as the shaping benefit from CBS. The goal of this paper is to investigate the impact of CBS on different priority flows, especially on the intermediate priority ones, as well as the effect of CBS bandwidth allocation. It is based on a performance comparison of AVB/TSN and AFDX by simulation in an automotive case study. Furthermore, the shaping benefit is modeled based on integral operation from network calculus perspective. Combing with the analysis of shaping restriction and shaping benefit, some configuration suggestions on the setting of CBS bandwidth are given. Results show that the effect of CBS depends on flow loads and CBS configurations. A larger load of high priority flows in AVB tends to a better performance for the intermediate priority flows when compared with AFDX. Shaping benefit can be explained and calculated according to the changing from the permitted maximum burst.

  8. Impact Analysis of Flow Shaping in Ethernet-AVB/TSN and AFDX from Network Calculus and Simulation Perspective

    Science.gov (United States)

    He, Feng; Zhao, Lin; Li, Ershuai

    2017-01-01

    Ethernet-AVB/TSN (Audio Video Bridging/Time-Sensitive Networking) and AFDX (Avionics Full DupleX switched Ethernet) are switched Ethernet technologies, which are both candidates for real-time communication in the context of transportation systems. AFDX implements a fixed priority scheduling strategy with two priority levels. Ethernet-AVB/TSN supports a similar fixed priority scheduling with an additional Credit-Based Shaper (CBS) mechanism. Besides, TSN can support time-triggered scheduling strategy. One direct effect of CBS mechanism is to increase the delay of its flows while decreasing the delay of other priority ones. The former effect can be seen as the shaping restriction and the latter effect can be seen as the shaping benefit from CBS. The goal of this paper is to investigate the impact of CBS on different priority flows, especially on the intermediate priority ones, as well as the effect of CBS bandwidth allocation. It is based on a performance comparison of AVB/TSN and AFDX by simulation in an automotive case study. Furthermore, the shaping benefit is modeled based on integral operation from network calculus perspective. Combing with the analysis of shaping restriction and shaping benefit, some configuration suggestions on the setting of CBS bandwidth are given. Results show that the effect of CBS depends on flow loads and CBS configurations. A larger load of high priority flows in AVB tends to a better performance for the intermediate priority flows when compared with AFDX. Shaping benefit can be explained and calculated according to the changing from the permitted maximum burst. PMID:28531158

  9. Problems in employing fibre optics in the Gigabit Ethernet network; Les problemes d'utiliser la fibre optique avec un reseau Gigabit Ethernet

    Energy Technology Data Exchange (ETDEWEB)

    Harvey, D.

    2000-10-01

    In developing the standards for the fibre optics Gigabit Ethernet network, the IEEE Committee 802.3z discovered certain problems involved with the 62.5 microns multi-mode fibres when employed at a wave-length of 850 nanometers. When looking for an explanation, it was discovered that equipment which conform to the Gigabit Ethernet standards utilize a laser for generating the light required for conveying information over the fibre optics network. The design of the 62.5 micron fibre contains certain impurities about the core of the fibre which reduces the light transmission. The result is no light , no information transmission through the core, and considerably reduced signal transmission towards the periphery of the fibre. Corning Corporation and other manufacturers of fibre optics came to the rescue by developing fibres specifically for the Gigabit Ethernet network. Corning, for example, manufactures four different varieties of optical fibres which are either 50 microns or 62.5 microns thick and operate optimally at a wavelength of 850 nanometers but at different distances ranging from 300 m to 600 m. The advantage of the different varieties of optical fibres is a matter of cost; since not all equipment requires the highest transmission distance to function properly, the ability to choose optical fibres that are optimal at a given level reduces the cost of the network. 1 tab., 1 fig.

  10. An Assessment of Gigabit Ethernet Technology and Its Applications at the NASA Glenn Research Center

    Science.gov (United States)

    Bakes, Catherine Murphy; Kim, Chan M.; Ramos, Calvin T.

    2000-01-01

    This paper describes Gigabit Ethernet and its role in supporting R&D programs at NASA Glenn. These programs require an advanced high-speed network capable of transporting multimedia traffic, including real-time visualization, high- resolution graphics, and scientific data. GigE is a 1 Gbps extension to 10 and 100 Mbps Ethernet. The IEEE 802.3z and 802.3ab standards define the MAC layer and 1000BASE-X and 1000BASE-T physical layer specifications for GigE. GigE switches and buffered distributors support IEEE 802.3x flow control. The paper also compares GigE with ATM in terms of quality of service, data rate, throughput, scalability, interoperability, network management, and cost of ownership.

  11. Novel Ethernet Based Optical Local Area Networks for Computer Interconnection

    NARCIS (Netherlands)

    Radovanovic, Igor; van Etten, Wim; Taniman, R.O.; Kleinkiskamp, Ronny

    2003-01-01

    In this paper we present new optical local area networks for fiber-to-the-desk application. Presented networks are expected to bring a solution for having optical fibers all the way to computers. To bring the overall implementation costs down we have based our networks on short-wavelength optical

  12. Capacity planning for Carrier Ethernet LTE backhaul networks

    DEFF Research Database (Denmark)

    Checko, Aleksandra; Ellegaard, Lars; Berger, Michael Stübert

    2012-01-01

    With the introduction of LTE networks operators need to plan a new, IP-based mobile backhaul. In this paper, we provide recommendation on dimensioning LTE backhaul networks links using three methods: delay-, dimensioning formula- and overbooking factor-based. Results are obtained from OPNET...

  13. A Real-Time Ethernet Network at Home

    NARCIS (Netherlands)

    Hanssen, F.T.Y.; Hartel, Pieter H.; Hattink, T.; Jansen, P.G.; Scholten, Johan; Wijnberg, J.

    This paper shows the current state of our research into a home network which provides both real-time and non-realtime capabilities for one coherent, distributed architecture. It is based on a new type of real-time token protocol that uses scheduling to achieve optimal token-routing in the network.

  14. A Real-Time Ethernet Network at Home

    NARCIS (Netherlands)

    Harbour, M.G.; Hanssen, F.T.Y.; Hartel, Pieter H.; Hattink, T.; Jansen, P.G.; Wijnberg, J.; Scholten, Johan

    This paper shows the current state of our research into a home network which provides both real-time and non-real-time capabilities for one coherent, distributed architecture. It is based on a new type of real-time token protocol that uses scheduling to achieve optimal token-routing in the network.

  15. Dynamic QoS Provisioning for Ethernet-based Networks

    Science.gov (United States)

    Angelopoulos, J.; Kanonakis, K.; Leligou, H. C.; Orfanoudakis, Th.; Katsigiannis, M.

    2008-11-01

    The evolution towards packet-based access networks and the importance of quality of experience brings the need for access networks that support the offer of a wide range of multimedia services not currently available to the desired extent. Legacy networks based on circuit switching used explicit signalling that travelled to all nodes along the path to book resources before the launce of the media stream. This approach does not scale well and is not in line with the philosophy of packet networks. Still, the need to reserve resources in advance remains since real-time services have limited if any means of adjusting their rates to the prevailing network conditions and to preserve customer satisfaction the traditional preventive approach that needs accurate estimates of resource needs for the duration of the session is the only option. The paper describes a possible CAC solution based on measuring flows and enriches the network with implicit admission control (without obviating explicit control if available) and can manage resource allocation to protect quality-demanding services from degradation. The basis is a flow measurement system, which will estimate the traffic load produced by the flow and activate admission control. However, because in most cases these initial indication may well be misleading, it will be cross checked against a database of previously recorded flows per customer interface which can provide long term data on the flows leaving only a few cases that have to be corrected on the fly. The overall product is a self-learning autonomic system that supports QoS in the access network for services that do not communicate with the network layer such as, for example, peer-to-peer real-time multimedia applications.

  16. Modeling and testing of ethernet transformers

    Science.gov (United States)

    Bowen, David

    2011-12-01

    Twisted-pair Ethernet is now the standard home and office last-mile network technology. For decades, the IEEE standard that defines Ethernet has required electrical isolation between the twisted pair cable and the Ethernet device. So, for decades, every Ethernet interface has used magnetic core Ethernet transformers to isolate Ethernet devices and keep users safe in the event of a potentially dangerous fault on the network media. The current state-of-the-art Ethernet transformers are miniature (explored which are capable of exceptional miniaturization or on-chip fabrication. This dissertation thoroughly explores the performance of the current commercial Ethernet transformers to both increase understanding of the device's behavior and outline performance parameters for replacement devices. Lumped element and distributed circuit models are derived; testing schemes are developed and used to extract model parameters from commercial Ethernet devices. Transfer relation measurements of the commercial Ethernet transformers are compared against the model's behavior and it is found that the tuned, distributed models produce the best transfer relation match to the measured data. Process descriptions and testing results on fabricated thin-film dielectric-core toroid transformers are presented. The best results were found for a 32-turn transformer loaded with 100Ω, the impedance of twisted pair cable. This transformer gave a flat response from about 10MHz to 40MHz with a height of approximately 0.45. For the fabricated transformer structures, theoretical methods to determine resistance, capacitance and inductance are presented. A special analytical and numerical analysis of the fabricated transformer inductance is presented. Planar cuts of magnetic slope fields around the dielectric-core toroid are shown that describe the effect of core height and winding density on flux uniformity without a magnetic core.

  17. Modeling and Algorithm for Multiple Spanning Tree Provisioning in Resilient and Load Balanced Ethernet Networks

    Directory of Open Access Journals (Sweden)

    Steven S. W. Lee

    2015-01-01

    Full Text Available We propose a multitree based fast failover scheme for Ethernet networks. In our system, only few spanning trees are used to carry working traffic in the normal state. As a failure happens, the nodes adjacent to the failure redirect traffic to the preplanned backup VLAN trees to realize fast failure recovery. In the proposed scheme, a new leaf constraint is enforced on the backup trees. It enables the network being able to provide 100% survivability against any single link and any single node failure. Besides fast failover, we also take load balancing into consideration. We model an Ethernet network as a twolayered graph and propose an Integer Linear Programming (ILP formulation for the problem. We further propose a heuristic algorithm to provide solutions to large networks. The simulation results show that the proposed scheme can achieve high survivability while maintaining load balancing at the same time. In addition, we have implemented the proposed scheme in an FPGA system. The experimental results show that it takes only few μsec to recover a network failure. This is far beyond the 50 msec requirement used in telecommunication networks for network protection.

  18. High Precision Testbed to Evaluate Ethernet Performance for In-Car Networks

    DEFF Research Database (Denmark)

    Revsbech, Kasper; Madsen, Tatiana Kozlova; Schiøler, Henrik

    2012-01-01

    Validating safety-critical real-time systems such as in-car networks often involves a model-based performance analysis of the network. An important issue performing such analysis is to provide precise model parameters, matching the actual equipment. One way to obtain such parameters is to derive...... them by measurements of the equipment. In this work we describe the design of a testbed enabling active measurements on up to 1 [Gb=Sec] Copper based Ethernet Switches. By use of the testbed it self, we conduct a series of tests where the precision of the testbed is estimated. We find a maximum error...

  19. Evaluating multicast resilience in carrier ethernet

    DEFF Research Database (Denmark)

    Ruepp, Sarah Renée; Wessing, Henrik; Zhang, Jiang

    2010-01-01

    This paper gives an overview of the Carrier Ethernet technology with specific focus on resilience. In particular, we show how multicast traffic, which is essential for IPTV can be protected. We detail the ackground for resilience mechanisms and their control and e present Carrier Ethernet...... resilience methods for linear nd ring networks. By simulation we show that the vailability of a multicast connection can be significantly increased by applying protection methods....

  20. A Multiservice Voice, Data, and Video Network Enabled by Optical Ethernet

    Science.gov (United States)

    Simcoe, Mitchell

    With data now approaching 60% of all aggregate traffic and expected to grow to 90% of all traffic by 2004, networks designed around all-packet architectures are being envisioned. Within this timeframe, a network vision is to deliver voice, video, and data services over a single packet-oriented network. Some entrepreneurial network providers are pursuing this vision in an even earlier timeframe. This article introduces a multiservices voice, data, and multicast video network over an Optical Ethernet architecture for residents of multidwelling units (MDU). This article reviews the network architecture for delivering these services over Optical Ethernet and addresses the challenges of handling service types with different bandwidths and latencies over a common packet-oriented infrastructure. As an example, it addresses the challenge of managing latency-intolerant traffic such as voice over IP over a common architecture as Internet data. Furthermore, it discusses the challenges of delivering over 100 channels of broadcast video as well as video on demand over the same infrastructure.

  1. Ethernet Operation Administration and Maintenance ; Opportunities for the NREN community

    NARCIS (Netherlands)

    Prins, M.J.; Malhotra, R.

    2011-01-01

    Ethernet started its life as a Local Area Network technology and initially did not have Operations, Administration and Maintenance (OAM) features like IP Ping, IP Traceroute and SDH Loss of Frame. Monitoring and management was mainly done on the IP level. In the case of delivery of Ethernet

  2. Work Project Report: Benchmark for 100 Gbps Ethernet network analysis

    CERN Document Server

    Moutidis, Iraklis

    2016-01-01

    During the Long Shutdown 2 (2018-2019) the LHCb experiment will be upgraded in order to reach extremely high precision on the main observable of the b and c-quarks sectors. In its current state the LHCb experiment has a readout rate of 1.1 MHz within a fixed latency, which causes the collision rate to be limited. The removal of this bottleneck is one of the main objectives of the LHCb upgrade. This will be achieved by implementing a trigger-less readout system where the functionality of the trigger will be executed by software. The trigger-less readout system must be able to handle large bandwidth such as 4 TBytes/s. For that reason the design of the system will include readout boards that can transmit information at the rate of 100 Gbits/s and a high throughput local area network [1]. The main goal of my project is to create an automatized benchmark for automatic launching, scheduling and analysing the performance of the readout boards and the network, in order to decide which manufacturer offers the best so...

  3. Work Project Report: Benchmark for 100 Gbps Ethernet network analysis

    CERN Document Server

    Moutidis, Iraklis

    2016-01-01

    During the Long Shutdown 2 (2018-2019) the LHCb experiment will be upgraded in order to reach extremely high precision on the main observable of the b and c-quarks sectors. In its current state the LHCb experiment has a readout rate of 1.1 MHz within a fixed latency, which causes the collision rate to be limited. The removal of this bottleneck is one of the main objectives of the LHCb upgrade. This will be achieved by implementing a trigger-less readout system where the functionality of the trigger will be executed by software. The trigger-less readout system must be able to handle large bandwidth such as 4 TBytes/s. For that reason the design of the system will include readout boards that can transmit information at the rate of 100 Gbits/s and a high throughput local area network [1]. The main goal of my project is to create an automatized benchmark for automatic launching, scheduling and analyzing the performance of the readout boards and the network, in order to decide which manufacturer offers the best so...

  4. A Dynamic Linear Hashing Method for Redundancy Management in Train Ethernet Consist Network

    Directory of Open Access Journals (Sweden)

    Xiaobo Nie

    2016-01-01

    Full Text Available Massive transportation systems like trains are considered critical systems because they use the communication network to control essential subsystems on board. Critical system requires zero recovery time when a failure occurs in a communication network. The newly published IEC62439-3 defines the high-availability seamless redundancy protocol, which fulfills this requirement and ensures no frame loss in the presence of an error. This paper adopts these for train Ethernet consist network. The challenge is management of the circulating frames, capable of dealing with real-time processing requirements, fast switching times, high throughout, and deterministic behavior. The main contribution of this paper is the in-depth analysis it makes of network parameters imposed by the application of the protocols to train control and monitoring system (TCMS and the redundant circulating frames discarding method based on a dynamic linear hashing, using the fastest method in order to resolve all the issues that are dealt with.

  5. Ethernet for Space Flight Applications

    Science.gov (United States)

    Webb, Evan; Day, John H. (Technical Monitor)

    2002-01-01

    NASA's Goddard Space Flight Center (GSFC) is adapting current data networking technologies to fly on future spaceflight missions. The benefits of using commercially based networking standards and protocols have been widely discussed and are expected to include reduction in overall mission cost, shortened integration and test (I&T) schedules, increased operations flexibility, and hardware and software upgradeability/scalability with developments ongoing in the commercial world. The networking effort is a comprehensive one encompassing missions ranging from small University Explorer (UNEX) class spacecraft to large observatories such as the Next Generation Space Telescope (NGST). Mission aspects such as flight hardware and software, ground station hardware and software, operations, RF communications, and security (physical and electronic) are all being addressed to ensure a complete end-to-end system solution. One of the current networking development efforts at GSFC is the SpaceLAN (Spacecraft Local Area Network) project, development of a space-qualifiable Ethernet network. To this end we have purchased an IEEE 802.3-compatible 10/100/1000 Media Access Control (MAC) layer Intellectual Property (IP) core and are designing a network node interface (NNI) and associated network components such as a switch. These systems will ultimately allow the replacement of the typical MIL-STD-1553/1773 and custom interfaces that inhabit most spacecraft. In this paper we will describe our current Ethernet NNI development along with a novel new space qualified physical layer that will be used in place of the standard interfaces. We will outline our plans for development of space qualified network components that will allow future spacecraft to operate in significant radiation environments while using a single onboard network for reliable commanding and data transfer. There will be a brief discussion of some issues surrounding system implications of a flight Ethernet. Finally, we will

  6. Design and Performance Evaluation of Optical Ethernet Switching Architecture with Liquid Crystal on Silicon-Based Beam-Steering Technology

    Science.gov (United States)

    Cheng, Yuh-Jiuh; Chou, H.-H.; Shiau, Yhi; Cheng, Shu-Ying

    2016-07-01

    A non-blocking optical Ethernet switching architecture with liquid crystal on a silicon-based beam-steering switch and optical output buffer strategies are proposed. For preserving service packet sequencing and fairness of routing sequence, priority and round-robin algorithms are adopted at the optical output buffer in this research. Four methods were used to implement tunable fiber delay modules for the optical output buffers to handle Ethernet packets with variable bit-rates. The results reported are based on the simulations performed to evaluate the proposed switching architecture with traffic analysis under a traffic model captured from a real-core network.

  7. On Application of Least-delay Variation Problem in Ethernet Networks Using SDN Concept

    Directory of Open Access Journals (Sweden)

    Tomas Hegr

    2016-01-01

    Full Text Available The goal of this paper is to present an application idea of SDN in Smart Grids, particularly, in the area of L2 multicast as defined by IEC 61850-9-2. Authors propose an Integer Linear Formulation (ILP dealing with a Least-Delay-Variation multicast forwarding problem that has a potential to utilize Ethernet networks in a new way. The proposed ILP formulation is numerically evaluated on random graph topologies and results are compared to a shortest path tree approach that is traditionally a product of Spanning Tree Protocols. Results confirm the correctness of the ILP formulation and illustrate dependency of a solution quality on the selected graph models, especially, in a case of scale-free topologies.

  8. Parallel Void Thread in Long-Reach Ethernet Passive Optical Networks

    KAUST Repository

    Elrasad, Amr

    2015-06-25

    This work investigates void filling (idle periods) in long-reach Ethernet passive optical networks. We focus on reducing grant delays and hence reducing the average packet delay. We introduce a novel approach called parallel void thread (PVT), which allocates bandwidth grants during voids baseless of bandwidth requests. We introduce three different grant sizing schemes for PVT, namely void extension, count controlled batch void filling, and size controlled batch void filling. The proposed approaches canbe integrated with almost all of the previously reported dynamic bandwidth allocation schemes. Unlike other void filling schemes, PVT is less sensitive to the differential distance between optical network units and can work very well in the case of limited differential distances. We have analytically investigated the packet delay and derived a bound condition for PVT to outperform the other competitors. We support our work with extensive simulation study considering bursty traffic with long range dependence for both the single-class and differentiated services (DiffServ) scenarios. Numerical results show delay reduction up to 35% compared with the non-void filling scheme for the single-class scenario. For DiffServ traffic, PVT achieves delay reduction up to 80% for expedited forward traffic, 52% for assured forward traffic, and 56% for best effort traffic. © 2015 OSA.

  9. Per-Stream QoS and Admission Control in Ethernet Passive Optical Networks (EPONs)

    Science.gov (United States)

    Dhaini, Ahmad R.; Assi, Chadi M.; Maier, Martin; Shami, Abdallah

    2007-07-01

    Ethernet passive optical networks (EPONs) are designed to deliver services for numerous applications such as voice over Internet protocol, standard and high-definition video, video conferencing (interactive video), and data traffic. Various dynamic bandwidth allocation and intra optical network unit (ONU) scheduling algorithms have been proposed to enable EPONs to deliver differentiated services for traffic with different quality of service (QoS) requirements. However, none of these protocols and schedulers can guarantee bandwidth for each class of service nor can they protect the QoS level required by admitted real-time traffic streams. In this paper, we propose the first framework for per-stream QoS protection in EPONs using a two-stage admission control (AC) system. The first stage enables the ONU to perform flow admission locally according to the bandwidth availability, and the second stage allows for global AC at the optical line terminal. Appropriate bandwidth allocation algorithms are presented as well. An event-driven simulation model is implemented to study the effectiveness of the proposed schemes in providing and protecting QoS.

  10. Network Gateway Technology: The Issue of Redundancy towards ...

    African Journals Online (AJOL)

    Network gateway redundancy technology makes it possible for computer devices to have access to multiple exit and entry points in the network, thus, eliminates the problem of a single point failure in both Ethernet and Internet networking systems. For effective implementation of network gateway redundancy, however, ideal ...

  11. Flow Monitoring Experiences at the Ethernet-Layer

    NARCIS (Netherlands)

    Hofstede, Rick; Hofstede, R.J.; Drago, Idilio; Sperotto, Anna; Pras, Aiko; Lehnert, Ralf

    2011-01-01

    Flow monitoring is a scalable technology for providing summaries of network activity. Being deployed at the IP-layer, it uses fixed flow definitions, based on fields of the IP-layer and higher layers. Since several backbone network operators are considering the deployment of (Carrier) Ethernet in

  12. Force10 networks performance in world's first transcontinental 10 gigabit ethernet network verified by Ixia

    CERN Multimedia

    2003-01-01

    Force10 Networks, Inc., today announced that the performance of the Force10 E-Series switch/routers deployed in a transcontinental network has been verified as line-rate 10 GE throughput by Ixia, a leading provider of high-speed, network performance and conformance analysis systems. The network, the world's first transcontinental 10 GE wide area network, consists of a SURFnet OC-192 lambda between Geneva and the StarLight facility in Chicago via Amsterdam and another OC-192 lambda between this same facility in Chicago and Carleton University in Ottawa, Canada provided by CANARIE and ORANO (1/2 page).

  13. Ethernet for Aerospace Applications - Ethernet Heads for the Skies

    Science.gov (United States)

    Grams, Paul R.

    2015-01-01

    One of the goals of aerospace applications is to reduce the cost and complexity of avionic systems. Ethernet is a highly scalable, flexible, and popular protocol. The aerospace market is large, with a forecasted production of over 50,000 turbine-powered aircraft valued at $1.7 trillion between 2012 and 2022. Boeing estimates demand for commercial aircraft by 2033 to total over 36,000 with a value of over $5 trillion. In 2014 US airlines served over 750 million passengers and this is growing over 2% yearly. Electronic fly-by-wire is now used for all airliners and high performance aircraft. Although Ethernet has been widely used for four decades, its use in aerospace applications is just beginning to become common. Ethernet is the universal solution in commercial networks because of its high bandwidths, lower cost, openness, reliability, maintainability, flexibility, and interoperability. However, when Ethernet was designed applications with time-critical, safety relevant and deterministic requirements were not given much consideration. Many aerospace applications use a variety of communication architectures that add cost and complexity. Some of them are SpaceWire, MIL-STD-1553, Avionics Full Duplex Switched Ethernet (AFDX), and Time-Triggered Ethernet (TTE). Aerospace network designers desire to decrease the number of networks to reduce cost and effort while improving scalability, flexibility, openness, maintainability, and reliability. AFDX and TTE are being considered more for critical aerospace systems because they provide redundancy, failover protection, guaranteed timing, and frame priority and are based on Ethernet IEEE 802.3. This paper explores the use of AFDX and TTE for aerospace applications.

  14. Better Bonded Ethernet Load Balancing

    Energy Technology Data Exchange (ETDEWEB)

    Gabler, Jason

    2006-09-29

    When a High Performance Storage System's mover shuttles large amounts of data to storage over a single Ethernet device that single channel can rapidly become saturated. Using Linux Ethernet channel bonding to address this and similar situations was not, until now, a viable solution. The various modes in which channel bonding could be configured always offered some benefit but only under strict conditions or at a system resource cost that was greater than the benefit gained by using channel bonding. Newer bonding modes designed by various networking hardware companies, helpful in such networking scenarios, were already present in their own switches. However, Linux-based systems were unable to take advantage of those new modes as they had not yet been implemented in the Linux kernel bonding driver. So, except for basic fault tolerance, Linux channel bonding could not positively combine separate Ethernet devices to provide the necessary bandwidth.

  15. Approaching Incast Congestion with Multi-host Ethernet Controllers

    CERN Document Server

    Jereczek, Grzegorz Edmund; The ATLAS collaboration

    2018-01-01

    The bursty many-to-one communication pattern, typical for data acquisition systems, but also present in datacenter networks, is particularly demanding for commodity TCP/IP and Ethernet technologies. We expand our study of building incast-resistant networks based on software switches running on commercial-off-the-shelf servers. In this paper we provide the estimates for costs and physical area required to build such a network. Our estimates indicate that our proposed design offers significant cost advantage over traditional solutions, but higher space utilisation. Next, we show how the latter can be improved with multi-host Ethernet controllers, as an alternative to typical network interface cards. This can also make software switching easier to adapt in datacenter as a solution for incast congestion. We confirm the capabilities for incast-avoidance by evaluating the performance of a reference platform.

  16. Approaching Incast Congestion with Multi-host Ethernet Controllers

    CERN Document Server

    Jereczek, Grzegorz Edmund; The ATLAS collaboration

    2017-01-01

    The bursty many-to-one communication pattern, typical for data acquisition systems, but also present in datacenter networks, is particularly demanding for commodity TCP/IP and Ethernet technologies. We expand our study of building incast-resistant networks based on software switches running on commercial-off-the-shelf servers. In this paper we provide the estimates for costs and physical area required to build such a network. Our estimates indicate that our proposed design offers significant cost advantage over traditional solutions, but higher space utilisation. Next, we show how the latter can be improved with multi-host Ethernet controllers, as an alternative to typical network interface cards. This can also make software switching easier to adapt in datacenter as a solution for incast congestion. We confirm the capabilities for incast-avoidance by evaluating the performance of a reference platform.

  17. Argonne National Lab deploys Force10 networks' massively dense ethernet switch for supercomputing cluster

    CERN Multimedia

    2003-01-01

    "Force10 Networks, Inc. today announced that Argonne National Laboratory (Argonne, IL) has successfully deployed Force10 E-Series switch/routers to connect to the TeraGrid, the world's largest supercomputing grid, sponsored by the National Science Foundation (NSF)" (1/2 page).

  18. Latency and bit-error-rate evaluation for radio-over-ethernet in optical fiber front-haul networks

    DEFF Research Database (Denmark)

    Sayadi, Mohammadjavad; Rodríguez, Sebastián; Olmos, Juan José Vegas

    2018-01-01

    and analyze the conditions for the implementation of a RoE protocol. For this purpose we digitalize radio frames that are taken from BBU or RRH and create RoE basic frames considering all the requirements of protocol. We then encapsulate RoE basic frames into an Ethernet packet and finally experimentally...... evaluate this Ethernet packet as a case of study for RoE applications. The packet is transmitted through different fiber spans, measuring the BER and latency on each case. The system achieves BER values below the FEC limit and a manageable latency. These results serve as a guideline and proof of concept...

  19. Virtual Laboratory for QoS Study in Next-Generation Networks with Metro Ethernet Access

    Science.gov (United States)

    Gomez-Sacristan, Angel; Sempere-Paya, Victor M.; Rodriguez-Hernandez, Miguel A.

    2016-01-01

    Teaching in university engineering departments is currently facing a number of challenges, especially for those involved in the most innovative and dynamic areas of information and communication technology. Learning model developments that place greater weight on laboratory activities require investment in specific equipment that is often very…

  20. Energy Efficiency in Ethernet Passive Optical Networks (EPONs): Protocol Design and Performance Evaluation

    DEFF Research Database (Denmark)

    Yan, Ying; Dittmann, Lars

    2011-01-01

    Mechanism (EMM) for downlink EPON systems. The proposed mechanism is designed to enhance the standardized control scheme in EPON with the objective to increase energy efficiency while satisfying diverse QoS requirements. The main idea is to put an Optical Network Unit (ONU) into the sleep mode and determine...... a suitable wakeup time scheduler at the Optical Line Terminal (OLT). A generic EPON system is considered, which is composed of an OLT and several ONUs that are EMM enabled. An energy consumption optimization problem aimed at saving energy is proposed and two heuristic sleep mode scheduling policies...... are addressed to solve it. The scheduling algorithms are tightly coupled with the upstream bandwidth allocation and downstream trans mission scheduling together through an integrated approach in which awake time in ONUs is minimized. There is a trade-off decision between maximizing the power saving...

  1. The effects of Ethernet LANs' fragmentation

    Directory of Open Access Journals (Sweden)

    Ion Bolun

    2006-09-01

    Full Text Available Three configurations of Ethernet networks that operate in duplex mode at relatively low load of transmission media are investigated. Configurations differ by number of collision domains and switches used in the network. To investigate the dependences among basic parameters, analytic models of the functioning of such networks are elaborated. Calculations made for a relatively large set of values of initial data confirm the necessity of case dependent special investigations on the physical configuration of concrete Ethernet networks. It has been determined, for example, that the fragmentation doesn't necessarily permit to increase the number of stations in the network; it may be even vice versa.

  2. An Ethernet Java Applet for a Course for Non-Majors.

    Science.gov (United States)

    Holliday, Mark A.

    1997-01-01

    Details the topics of a new course that introduces computing and communication technology to students not majoring in computer science. Discusses the process of developing a Java applet (a program that can be invoked through a World Wide Web browser) that illustrates the protocol used by ethernet local area networks to determine which computer can…

  3. Protection switching for carrier ethernet multicast

    DEFF Research Database (Denmark)

    Ruepp, Sarah Renée; Wessing, Henrik; Berger, Michael Stübert

    2010-01-01

    This paper addresses network survivability for IPTV multicast transport in Carrier Ethernet networks. The impact of link failures is investigated and suggestions for intelligent multicast resilience schemes are proposed. In particular, functions of the multicast tree are integrated with the Carrier...... Ethernet transport layer, thereby optimizing the protection path with regards to delay and Quality of Experience (QoE). The proposed schemes are evaluated both through simulations and testbed experiments. Results clearly show the benefit of the integrated multicast scheme and illustrate a trade-off between...

  4. Flexible logical-link-identifier assignment policy for Ethernet passive optical networks based on extended multipoint-control-protocol du flow control

    Science.gov (United States)

    Hajduczenia, Marek; da Silva, Henrique J.; Monteiro, Paulo P.

    2006-09-01

    We present a novel proposal for the extension of the currently approved multipoint control protocol (MPCP), as defined in the IEEE 802.3ah standard, clause 64, in the form of two new MPCP messages (extended GATE and extended REPORT), maintaining full backward compatibility with the already-deployed Ethernet passive optical network (EPON) systems and allowing for coexistence with legacy MPCP flow-control messages within the same network structure. Both currently existing logical-link identifier (LLID) assignment systems [namely, one LLID per optical network unit (ONU) and one LLID per queue] are examined in depth, and a missing scenario (one LLID per multiqueue) is discussed. Simulation results conducted using C++ based implementation of standard EPON networks with support for extended GATE-REPORT MPCP data units (DUs) prove that the design assumptions for both new flow-control messages were met to their fullest extent. The eGATE/eREPORT MPCP DUs allow for per-queue scheduling from the central packet controller in the optical line terminal (OLT) at the cost of ONU-based operation, thereby maintaining the benefits of two standard solutions. The obtained simulation results indicate superiority of the proposed IEEE 802.3ah, clause 64 extension in terms of network resource management, bandwidth efficiency, and system setup flexibility.

  5. Technologies for Home Networking

    DEFF Research Database (Denmark)

    A broad overview of the home networking field, ranging from wireless technologies to practical applications. In the future, it is expected that private networks (e.g. home networks) will become part of the global network ecosystem, participating in sharing their own content, running IP...

  6. Deployment of a Testbed in a Brazilian Research Network using IPv6 and Optical Access Technologies

    Science.gov (United States)

    Martins, Luciano; Ferramola Pozzuto, João; Olimpio Tognolli, João; Chaves, Niudomar Siqueira De A.; Reggiani, Atilio Eduardo; Hortêncio, Claudio Antonio

    2012-04-01

    This article presents the implementation of a testbed and the experimental results obtained with it on the Brazilian Experimental Network of the government-sponsored "GIGA Project." The use of IPv6 integrated to current and emerging optical architectures and technologies, such as dense wavelength division multiplexing and 10-gigabit Ethernet on the core and gigabit capable passive optical network and optical distribution network on access, were tested. These protocols, architectures, and optical technologies are promising and part of a brand new worldwide technological scenario that has being fairly adopted in the networks of enterprises and providers of the world.

  7. Method of construction of rational corporate network using the simulation model

    Directory of Open Access Journals (Sweden)

    V.N. Pakhomovа

    2013-06-01

    Full Text Available Purpose. Search for new options of the transition from Ethernet technology. Methodology. Physical structuring of the Fast Ethernet network based on hubs and logical structuring of Fast Ethernet network using commutators. Organization of VLAN based on ports grouping and in accordance with the standard IEEE 802 .1Q. Findings. The options for improving of the Ethernet network are proposed. According to the Fast Ethernet and VLAN technologies on the simulation models in packages NetCraker and Cisco Packet Traker respectively. Origiality. The technique of designing of local area network using the VLAN technology is proposed. Practical value.Each of the options of "Dniprozaliznychproekt" network improving has its advantages. Transition from the Ethernet to Fast Ethernet technology is simple and economical, it requires only one commutator, when the VLAN organization requires at least two. VLAN technology, however, has the following advantages: reducing the load on the network, isolation of the broadcast traffic, change of the logical network structure without changing its physical structure, improving the network security. The transition from Ethernet to the VLAN technology allows you to separate the physical topology from the logical one, and the format of the ÌEEE 802.1Q standard frames allows you to simplify the process of virtual networks implementation to enterprises.

  8. Ethernet direct display: a new dimension for in-vehicle video connectivity solutions

    Science.gov (United States)

    Rowley, Vincent

    2009-05-01

    To improve the local situational awareness (LSA) of personnel in light or heavily armored vehicles, most military organizations recognize the need to equip their fleets with high-resolution digital video systems. Several related upgrade programs are already in progress and, almost invariably, COTS IP/Ethernet is specified as the underlying transport mechanism. The high bandwidths, long reach, networking flexibility, scalability, and affordability of IP/Ethernet make it an attractive choice. There are significant technical challenges, however, in achieving high-performance, real-time video connectivity over the IP/Ethernet platform. As an early pioneer in performance-oriented video systems based on IP/Ethernet, Pleora Technologies has developed core expertise in meeting these challenges and applied a singular focus to innovating within the required framework. The company's field-proven iPORTTM Video Connectivity Solution is deployed successfully in thousands of real-world applications for medical, military, and manufacturing operations. Pleora's latest innovation is eDisplayTM, a smallfootprint, low-power, highly efficient IP engine that acquires video from an Ethernet connection and sends it directly to a standard HDMI/DVI monitor for real-time viewing. More costly PCs are not required. This paper describes Pleora's eDisplay IP Engine in more detail. It demonstrates how - in concert with other elements of the end-to-end iPORT Video Connectivity Solution - the engine can be used to build standards-based, in-vehicle video systems that increase the safety and effectiveness of military personnel while fully leveraging the advantages of the lowcost COTS IP/Ethernet platform.

  9. A computer tool to support in design of industrial Ethernet.

    Science.gov (United States)

    Lugli, Alexandre Baratella; Santos, Max Mauro Dias; Franco, Lucia Regina Horta Rodrigues

    2009-04-01

    This paper presents a computer tool to support in the project and development of an industrial Ethernet network, verifying the physical layer (cables-resistance and capacitance, scan time, network power supply-POE's concept "Power Over Ethernet" and wireless), and occupation rate (amount of information transmitted to the network versus the controller network scan time). These functions are accomplished without a single physical element installed in the network, using only simulation. The computer tool has a software that presents a detailed vision of the network to the user, besides showing some possible problems in the network, and having an extremely friendly environment.

  10. Ethernet ring protection with managed FDB using APS payload

    Science.gov (United States)

    Im, Jinsung; Ryoo, Jeong-dong; Joo, Bheom Soon; Rhee, J.-K. Kevin

    2007-11-01

    Ethernet ring protection (ERP) is a new technology based on OAM (operations, administration, and maintenance) being standardized by the ITU-T G.8032 working group. In this paper, we present the recent development of Ethernet ring protection which is called FDB (filtering database) flush scheme and propose a new Ethernet ring protection technique introducing a managed FDB using APS to deliver information how to fix FDB selectively. We discuss the current development of the ERP technology at ITU-T and performance comparisons between different proposals.

  11. Neural network technologies

    Science.gov (United States)

    Villarreal, James A.

    1991-01-01

    A whole new arena of computer technologies is now beginning to form. Still in its infancy, neural network technology is a biologically inspired methodology which draws on nature's own cognitive processes. The Software Technology Branch has provided a software tool, Neural Execution and Training System (NETS), to industry, government, and academia to facilitate and expedite the use of this technology. NETS is written in the C programming language and can be executed on a variety of machines. Once a network has been debugged, NETS can produce a C source code which implements the network. This code can then be incorporated into other software systems. Described here are various software projects currently under development with NETS and the anticipated future enhancements to NETS and the technology.

  12. Extending AAA operational model for profile-based access control in ethernet-based Neutral Access Networks

    NARCIS (Netherlands)

    Matias, J.; Jacob, E.; Demchenko, Y.; de Laat, C.; Gommans, L.; Macías López, E.M.; Bogliolo, A.; Perry, M.; Ran, M

    2010-01-01

    Neutral Access Networks (NAN) have appeared as a new model to overcome some restrictions and lack of flexibility that are present currently in broadband access networks. NAN brings new business opportunities by opening this market to new stakeholders. Although the NAN model is accepted, there are

  13. Research on Optimization for Motion Control Bus Based on Ethernet

    Directory of Open Access Journals (Sweden)

    Kai Sun

    2013-01-01

    Full Text Available Field bus system has been successfully introduced into industrial automation. Nowadays, most of the motion control bus is based on the Ethernet physical layer, and all of the new standards are based on the Ethernet physical layer. This paper introduces a new optimized technology based on motion control bus of the Ethernet physical layer, which includes the prediction mechanism in the arrival of the frames, the retransmission mechanism in advance, and a new mechanism of independent verification of data segment. Tests show that using the mechanisms in this paper can enhance efficiency and reliability in communication process.

  14. Exploitation of Unintentional Ethernet Cable Emissions Using Constellation Based-Distinct Native Attribute (CB-DNA) Fingerprints to Enhance Network Security

    Science.gov (United States)

    2015-09-17

    Gerdes, R. M., Daniels, T. E., Mina , M., and Russell, S. F. Device Identification via Analog Signal Fingerprinting: A Matched Filter Approach. In NDSS...2006). 28. Gerdes, R. M., Mina , M., Russell, S. F., and Daniels, T. E. Physical- Layer Identification of Wired Ethernet Devices. IEEE Trans on

  15. GiGabit Ethernet mezzanines for DAQ and Trigger links of LHCb

    CERN Document Server

    Müller, H; Guirao, A

    2003-01-01

    The LHCb experiment uses IEEE 802.ab (GiGabit ethernet) technology for the data transport and readout network layer between the L1 data buffers and the CPU farm. The common way to interface the L1 buffers in LHCb to the physical layers of GiGabitEthernet (GBE) is specified in this document. The SPI-3 industry standard is used as a narrow, FiFo-like interface which can be easily implemented in the FPGAs of the L1 boards. The SPI-3 protocol on the mezzanine cards is handled by commercial chips. Up to 4 bidirectional GBE channels can be implemented on a 149*74 mm mezzanine of stackheight 11 mm. These are interfaced through one 150 pin, high-speed connector which is defined here as LHCb standard.

  16. Social Networking Technologies

    Science.gov (United States)

    2015-01-01

    amount of information, new platforms are created to facilitate and capitalize on it. Social networking technologies have been celebrated for their...some of the privacy we would otherwise have. Further Reading: Reinecke, Leonard; Trepete, Sabine. Privacy Online: Perspectives on Privacy and Self ... Disclosure in the Social Web. New York, NY: Springer Publishing Company, 2011. Silverman, Jacob. Terms of Service: Social Media and the Price of

  17. Possibilities of implementation of synchronous Ethernet in popular Ethernet version using timing and interference constraints

    Directory of Open Access Journals (Sweden)

    Seetaiah KILARU

    2015-12-01

    Full Text Available Popular network architectures are following packet based architectures instead of conventional Time division multiplexing. The existed Ethernet is basically asynchronous in nature and was not designed based on timing transfer constraints. To achieve the challenge of next generation network with respect to efficient bandwidth and faster data rates, we have to deploy the network which has less latency. This can be achieved by Synchronous Ethernet (SyncE. In Sync-E, Phase Locked Loop (PLL was used to recover the incoming jitter from clock recovery circuit. Then feed the PLL block to transmission device. We have to design the network in an unaffected way that the functions of Ethernet should run in normal way even we introduced timing path at physical layer. This paper will give detailed outlook on how Sync-E is achieved from Asynchronous format. Reference model of 100 Base-TX/FX was analyzed with respect to timing and interference constraints. Finally, it was analyzed with the data rate improvement with the proposed method.

  18. An Audio Stream Redirector for the Ethernet Speaker

    Science.gov (United States)

    Mandrekar, Ishan; Prevelakis, Vassilis; Turner, David Michael

    2004-01-01

    The authors have developed the "Ethernet Speaker" (ES), a network-enabled single board computer embedded into a conventional audio speaker. Audio streams are transmitted in the local area network using multicast packets, and the ES can select any one of them and play it back. A key requirement for the ES is that it must be capable of playing any…

  19. White Rabbit: Sub-nanosecond timing over Ethernet

    Energy Technology Data Exchange (ETDEWEB)

    Jansweijer, P.P.M.; Peek, H.Z. [Nikhef, Science Park 105, 1098 XG Amsterdam (Netherlands); Wolf, E. de, E-mail: e.dewolf@nikhef.nl [Nikhef, Science Park 105, 1098 XG Amsterdam (Netherlands); University of Amsterdam, Science Park 904, 1098 XH Amsterdam (Netherlands)

    2013-10-11

    The White Rabbit (WR) project is a multi-laboratory, multi-company effort to bring the best of the data transfer and the timing world together in a completely open design. WR is a fully deterministic Ethernet-based network for general purpose data transfer and synchronization. The aim is to enable the synchronization of a large number of nodes with sub-nanosecond accuracy and picosecond jitter over long lengths of fibre. The key technologies used are physical layer syntonization (clock recovery) and the Precision Time Protocol (IEEE 1588). WR generates sub-nanosecond synchronous precision timing in all nodes by continuous tracking and compensating the transmission delays. We give an overview of the WR project and describe the design goals and specifications of the project. The WR switch and the (user) node which are the central components of the WR system and real timing measurements of prototypes of WR hardware are presented.

  20. Tuchola County Broadband Network (TCBN)

    DEFF Research Database (Denmark)

    Zabludowski, Antoni; Dubalski, B.; Zabludowski, Lukasz

    2012-01-01

    technology for active equipment. The presented solution provides low cost of construction (CAPEX), ease of implementation of the network and low operating cost (OPEX). Moreover the parameters of installed Metro Ethernet switches in the network guarantee the scalability of the network for at least 10 years....... Funds. The network plan presented in the paper contains both topological structure of fiber optic network as well as the active equipment for the network. In the project described in the paper it has been suggested to use Modular Cable System - MCS for passive infrastructure and Metro Ethernet...

  1. 10Gig Ethernet goes halfway round the world

    CERN Multimedia

    Betts, Bryan

    2004-01-01

    In a project that could enable bigger SANs and computing grids, nuclear physicists have built a native 10 Gigabit Ethernet network linking Switzerland and Japan. The 18,500 kilometer LAN crosses 17 ime zones, as it follows fibers through Amsterdam, Chicago and Seattle

  2. White Rabbit: Sub-nanosecond timing over Ethernet

    NARCIS (Netherlands)

    Jansweijer, P.P.M.; Peek, H.Z.; de Wolf, E.

    2013-01-01

    The White Rabbit (WR) project is a multi-laboratory, multi-company effort to bring the best of the data transfer and the timing world together in a completely open design. WR is a fully deterministic Ethernet-based network for general purpose data transfer and synchronization. The aim is to enable

  3. 40 Gigabit ethernet: prototyping transparent end-to-end connectivity

    NARCIS (Netherlands)

    Dumitru, C.; Koning, R.; de Laat, C.

    2011-01-01

    The ever increasing demands of data intensive eScience applications have pushed the limits of computer networks. With the launch of the new 40 Gigabit Ethernet (40GE) standard, 802.3ba, applications can go beyond the common 10 Gigabit/s per data stream barrier for both local area, and as

  4. 10BASE5 Ethernet Cable & Vampire Tap

    CERN Multimedia

    1983-01-01

    10BASE5 Thick Ethernet Cable, 10Mbit/sec. In the 1980s and early 1990's, Ethernet became more popular and provided a much faster data transmission rate. This cable is one of the first ethernet cables from 1983, a thick, bulky affair. Computers were attached via "Vampire Taps" which were connectors screwed straight through the shielding of the cable.

  5. Engineering technology for networks

    Science.gov (United States)

    Paul, Arthur S.; Benjamin, Norman

    1991-01-01

    Space Network (SN) modeling and evaluation are presented. The following tasks are included: Network Modeling (developing measures and metrics for SN, modeling of the Network Control Center (NCC), using knowledge acquired from the NCC to model the SNC, and modeling the SN); and Space Network Resource scheduling.

  6. High-performance image communication network with asynchronous transfer mode technology

    Science.gov (United States)

    Wong, Albert W. K.; Huang, H. K.; Lee, Joseph K.; Bazzill, Todd M.; Zhu, Xiaoming

    1996-05-01

    Asynchronous transfer mode (ATM) technology has been implemented within our radiology department's hospital-wide PACS as well as in a wide area network (WAN) connecting affiliated hospitals. This paper describes our implementation strategies and the network performance observed in a clinical setting. The image communication network for our PACS is composed of two network interfaces: ATM (OC-3, 155 Mbps) and Ethernet (10 Mbps). This communication network connects four major campus buildings and two remote hospitals, providing intra- and interbuilding communication for radiologic images including CT, MR, CR, US, and digitized screen-film images. The network links these modalities via their acquisition computers to the PACS controller and to display workstations. The ATM serves as the primary network for transmission of radiologic images and relevant data within the entire PACS. The standard Ethernet is used as a backup network for ATM. It interconnects all PACS components including radiologic imaging systems, acquisition computers, display workstations, the PACS controller, the database servers, and the RIS and HIS. Our communication network operates on a 24 hrs/day, 7 days/week basis. Performance of the ATM network was evaluated in terms of disk-to-disk, disk-to-memory, and memory-to- memory transmission rates. The average memory-to-memory transmission rate over the wide area ATM network was 8.3 MByte/s, which corresponds to transferring a 40-slice (or, 20- MByte) CT examination to a remote site in less than 3 seconds. With the emerging ATM technology, we believe that ATM-based digital communication network is a suitable choice for large-scale PACS involving both LAN and WAN.

  7. FPGA Implementation of Real-Time Ethernet for Motion Control

    Directory of Open Access Journals (Sweden)

    Chen Youdong

    2013-01-01

    Full Text Available This paper provides an applicable implementation of real-time Ethernet named CASNET, which modifies the Ethernet medium access control (MAC to achieve the real-time requirement for motion control. CASNET is the communication protocol used for motion control system. Verilog hardware description language (VHDL has been used in the MAC logic design. The designed MAC serves as one of the intellectual properties (IPs and is applicable to various industrial controllers. The interface of the physical layer is RJ45. The other layers have been implemented by using C programs. The real-time Ethernet has been implemented by using field programmable gate array (FPGA technology and the proposed solution has been tested through the cycle time, synchronization accuracy, and Wireshark testing.

  8. Evaluation of restoration mechanisms for future services using Carrier Ethernet

    DEFF Research Database (Denmark)

    Wessing, Henrik; Berger, Michael Stübert; Gestsson, H.M.

    2010-01-01

    In this paper, we evaluate and classify future service according to their requirements for delay, loss and bandwidth. The most demanding services include IPTV in different forms, hence IPTV is used as a representative for future services. Carrier Ethernet technologies are introduced with special...... focus on its OAM functionalities, and it is evaluated how IPTV performs in case of link failures on a Carrier Ethernet implementation. It is concluded that OAM update times of 10 ms is required to provide acceptable restoration performance in case of errors....

  9. Using 100G Network Technology in Support of Petascale Science

    Science.gov (United States)

    Gary, James P.

    2011-01-01

    NASA in collaboration with a number of partners conducted a set of individual experiments and demonstrations during SC 10 that collectively were titled "Using 100G Network Technology in Support of Petascale Science". The partners included the iCAIR, Internet2, LAC, MAX, National LambdaRail (NLR), NOAA and SCinet Research Sandbox (SRS) as well as the vendors Ciena, Cisco, ColorChip, cPacket, Extreme Networks, Fusion-io, HP and Panduit who most generously allowed some of their leading edge 40G/100G optical transport, Ethernet switch and Internet Protocol router equipment and file server technologies to be involved. The experiments and demonstrations featured different vendor-provided 40G/100G network technology solutions for full-duplex 40G and 100G LAN data flows across SRS-deployed single-node fiber-pairs among the Exhibit Booths of NASA, the National Center for Data lining, NOAA and the SCinet Network Operations Center, as well as between the NASA Exhibit Booth in New Orleans and the Starlight Communications Exchange facility in Chicago across special SC 10- only 80- and 100-Gbps wide area network links provisioned respectively by the NLR and Internet2, then on to GSFC across a 40-Gbps link. provisioned by the Mid-Atlantic Crossroads. The networks and vendor equipment were load-stressed by sets of NASA/GSFC High End Computer Network Team-built, relatively inexpensive, net-test-workstations that are capable of demonstrating greater than 100Gbps uni-directional nuttcp-enabled memory-to-memory data transfers, greater than 80-Gbps aggregate--bidirectional memory-to-memory data transfers, and near 40-Gbps uni-directional disk-to-disk file copying. This paper will summarize the background context, key accomplishments and some significances of these experiments and demonstrations.

  10. Parallel Processing Performance Evaluation of Mixed T10/T100 Ethernet Topologies on Linux Pentium Systems

    National Research Council Canada - National Science Library

    Decato, Steven

    1997-01-01

    ... performed on relatively inexpensive off the shelf components. Alternative network topologies were implemented using 10 and 100 megabit-per-second Ethernet cards under the Linux operating system on Pentium based personal computer platforms...

  11. Networks Technology Conference

    Science.gov (United States)

    Tasaki, Keiji K. (Editor)

    1993-01-01

    The papers included in these proceedings represent the most interesting and current topics being pursued by personnel at GSFC's Networks Division and supporting contractors involved in Space, Ground, and Deep Space Network (DSN) technical work. Although 29 papers are represented in the proceedings, only 12 were presented at the conference because of space and time limitations. The proceedings are organized according to five principal technical areas of interest to the Networks Division: Project Management; Network Operations; Network Control, Scheduling, and Monitoring; Modeling and Simulation; and Telecommunications Engineering.

  12. 10 Gigabit Ethernet Performance on SGI Altix and Origin Systems

    Science.gov (United States)

    Meyer, Andy

    2005-01-01

    As the state of high performance computing continues to advance, the size of datasets continue to grow, driving a need for high bandwidth data networks. family of networks. 10 Gigabit Ethernet is the latest step in the popular Ethernet We have evaluated the S2io Xframe 10 Gigabit Ethernet adapter on 512p SGI Altix systems running ProPack 3, and Origin systems running Irix 6.5.24 and 6.5.26 in our production supercomputing environment. We encountered a number of performance and stability issues, which were promptly dealt with by SGI and S2io. Using nttcp we tested TCP performance for single and multiple streams, and we tested file transfer using NFS and bbftp. We will present the results of our testing, including the effects of various tuning options on throughput and CPU utilization, and offer suggestions for configuring and tuning S2io 10 Gigabit Ethernet cards in an Altix/Linux or Origin/Irix environment.

  13. Technologies for unattended network operations

    Science.gov (United States)

    Jaworski, Allan; Odubiyi, Jide; Holdridge, Mark; Zuzek, John

    1991-01-01

    The necessary network management functions for a telecommunications, navigation and information management (TNIM) system in the framework of an extension of the ISO model for communications network management are described. Various technologies that could substantially reduce the need for TNIM network management, automate manpower intensive functions, and deal with synchronization and control at interplanetary distances are presented. Specific technologies addressed include the use of the ISO Common Management Interface Protocol, distributed artificial intelligence for network synchronization and fault management, and fault-tolerant systems engineering.

  14. Technologies for unattended network operations

    Science.gov (United States)

    Jaworski, Allan; Odubiyi, Jide; Holdridge, Mark; Zuzek, John

    1991-09-01

    The necessary network management functions for a telecommunications, navigation and information management (TNIM) system in the framework of an extension of the ISO model for communications network management are described. Various technologies that could substantially reduce the need for TNIM network management, automate manpower intensive functions, and deal with synchronization and control at interplanetary distances are presented. Specific technologies addressed include the use of the ISO Common Management Interface Protocol, distributed artificial intelligence for network synchronization and fault management, and fault-tolerant systems engineering.

  15. Optically amplified 100-gigabit ethernet

    Science.gov (United States)

    Spiekman, Leo

    2017-01-01

    100GBASE-LR4 is an unamplified standard for Ethernet at 100 Gb/s data rate, allowing for connection distances up to 10km, while 100GBASE-ER4 calls for larger optical budget in order to reach at least 40km. We discuss these for high-speed communication between data centers, with particular emphasis on the optical amplification (SOAs) included in the transceiver modules in order to enable long-distance links.

  16. Modeling the 10-gigabit ethernet ASC WAN.

    Energy Technology Data Exchange (ETDEWEB)

    Tolendino, Lawrence F.; Wertz, Jason Scott

    2006-07-01

    In recent years, modeling and simulation has played an increasingly important role in the maintenance of the nuclear stockpile. The Advanced Simulation and Computing (ASC) program continues to support and encourage the development of a modeling and simulation infrastructure to make these goals a reality. The Distance Computing Network has been making make the ASC resources available to users throughout the tri-lab environment for over five years. This network relies on the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol suite to provide high performance and reliable communications. Understanding TCP/IP operation in this unique environment is critical. Software modeling has been used to analyze current network performance and predict the effect of proposed changes. Recently the network architecture was radically changed and the software model had to be changed as well. Whereas the original network was based on 2.5 gigabit per second ATM links, the redesigned network is comprised of 10-gigabit Ethernet links arranged as a 3-node ring. Therefore, a new software model was needed to continue to predict the performance of proposed changes and allow engineers to experiment with new network applications without the risk of interfering with critical operations.

  17. MUXER—A New Equipment for Energy Saving in Ethernet

    Directory of Open Access Journals (Sweden)

    Md Mehedi Hassan Onik

    2017-11-01

    Full Text Available Nowadays, the rapidly increasing energy consumption of communication equipment is an economic and environmental problem that needs to be addressed. Small Local Area Networks (LAN switches in the US alone consume about 8 TWh per year that corresponds to hundreds of millions of US dollars in electricity. A main reason is communication equipment, due to the fact that, Ethernet switches have to active all days even in low-traffic time. There are many approaches to make the switches sensitive with the different traffic load environment, but they have to put some changes to current Ethernet that cause the incompatibility issues. This paper proposes a new device called Modified Multiplexer (MUXER, which can control the power functions of switches without modifying the current Ethernet protocol. The MUXER devices are put before the switches in the network, which provide some functions to transfer incoming Media Access Control (MAC data frames to the corresponding switches managed by MUXERs. By using the proposed device, the wasted energies in the network can be reduced, especially in the specified low-traffic time. We describe the result of numerical analysis and compare detail power consumption data between a normal and a network where MUXERs are installed. In this work, the explained result shows that if a network administrator can estimate the number of MUXER needed for a particular network and install accordingly, our device can provides a significant energy saving.

  18. MSFC institutional area network and ATM technology

    Science.gov (United States)

    Amin, Ashok T.

    1994-01-01

    The New Institutional Area Network (NEWIAN) at Marshall supports over 5000 end users with access to 26 file servers providing work presentation services. It is comprised of some 150 Ethernet LAN's interconnected by bridges/routers which are in turn connected to servers over two dual FDDI rings. The network supports various higher level protocols such as IP, IPX, AppleTalk (AT), and DECNet. At present IPX and AT protocols packets are routed, and IP protocol packets are bridged; however, work is in progress to route all IP packets. The impact of routing IP packets on network operation is examined. Broadband Integrated Services Data Network (BISDN), presently at various stages of development, is intended to provide voice, video, and data transfer services over a single network. BISDN will use asynchronous transfer mode (ATM) as a data transfer technique which provides for transmission, multiplexing, switching, and relaying of small size data units called cells. Limited ATM Wide Area Network (WAN) services are offered by Wiltel, AT&T, Sprint, and others. NASA is testing a pilot ATM WAN with a view to provide Program Support Communication Network services using ATM. ATM supports wide range of data rates and quality of service requirements. It is expected that ATM switches will penetrate campus networks as well. However, presently products in these areas are at various stages of development and standards are not yet complete. We examine development of ATM to help assess its role in the evolution of NEWIAN.

  19. Performance in wireless networks and industrial wireless networks on control processes in real time under industrial environments

    Directory of Open Access Journals (Sweden)

    Juan F. Monsalve-Posada

    2015-01-01

    Full Text Available The growing use of Ethernet networks on the industrial automation pyramid has led many companies to develop new devices to operate in requirements of this level, nowadays it is called Industrial Ethernet network, on the market there are various sensors and actuators to industrial scale equipped with this technology, many of these devices are very expensive. In this paper, the performance of two wireless networks is evaluated, the first network has conventional Ethernet devices, and the second network has Industrial Ethernet devices. For the process we vary four parameters such as distance, number of bytes, the signal to noise ratio, and the packet error rate, and then we measure delays and compare with metric statistics results, Box Plot graphs were used for the analysis. Finally, we conclude that under the parameters and conditions tested, wireless networks can serve as a communication system in control applications with allowable delays of up to 50 ms, in addition, the results show a better performance of Industrial Ethernet networks over conventional networks, with differences in the RTT of milliseconds. Therefore, it is recommended to establish what risk is for the process to control these delays to determine if the equipment conventional applies, since under certain features like humidity and temperature can operate properly for a considerable time and at lower cost than devices to Industrial Ethernet.

  20. Modeling network technology deployment rates with different network models

    OpenAIRE

    Chung, Yoo

    2011-01-01

    To understand the factors that encourage the deployment of a new networking technology, we must be able to model how such technology gets deployed. We investigate how network structure influences deployment with a simple deployment model and different network models through computer simulations. The results indicate that a realistic model of networking technology deployment should take network structure into account.

  1. Design and FPGA implementation for MAC layer of Ethernet PON

    Science.gov (United States)

    Zhu, Zengxi; Lin, Rujian; Chen, Jian; Ye, Jiajun; Chen, Xinqiao

    2004-04-01

    Ethernet passive optical network (EPON), which represents the convergence of low-cost, high-bandwidth and supporting multiple services, appears to be one of the best candidates for the next-generation access network. The work of standardizing EPON as a solution for access network is still underway in the IEEE802.3ah Ethernet in the first mile (EFM) task force. The final release is expected in 2004. Up to now, there has been no standard application specific integrated circuit (ASIC) chip available which fulfills the functions of media access control (MAC) layer of EPON. The MAC layer in EPON system has many functions, such as point-to-point emulation (P2PE), Ethernet MAC functionality, multi-point control protocol (MPCP), network operation, administration and maintenance (OAM) and link security. To implement those functions mentioned above, an embedded real-time operating system (RTOS) and a flexible programmable logic device (PLD) with an embedded processor are used. The software and hardware functions in MAC layer are realized through programming embedded microprocessor and field programmable gate array(FPGA). Finally, some experimental results are given in this paper. The method stated here can provide a valuable reference for developing EPON MAC layer ASIC.

  2. An overview of high-speed networking for workstations

    Energy Technology Data Exchange (ETDEWEB)

    Hake, K.

    1995-04-01

    The telecommunications industry provides new technologies for GIS (Geographic Information System) workstation upgrades: Fast Ethernet, 100VG-AnyLAN, and Asynchronous Transfer Mode (ATM). These network technologies are based on approved standards and have industry backing (alliance for Fast Ethernet). This paper briefly examines these technologies. Fast Ethernet is an extension to its predecessor 10 Mbps Ethernet, providing a 10x increase in transmission rate. 100VG-AnyLAN offers extensions to Ethernet but embraces the Token Ring technology, allowing internetworking and better performance for networked video. ATM takes a radial approach by simplifying the information quantum to a 53-byte cell, resulting in rapid data handling for telecommunications equipment and allowing efficient transport of data, video, and voice communications. Switched Ethernet and Full Duplexing are among the other technologies competing for this market. The ultimate test of usefulness for any technology lies in how they handle the GIS environment requirements; working demonstration systems will help clarify marketing rhetoric and determine which vendor best implemented the standard.

  3. Analysis of 2D Torus and Hub Topologies of 100Mb/s Ethernet for the Whitney Commodity Computing Testbed

    Science.gov (United States)

    Pedretti, Kevin T.; Fineberg, Samuel A.; Kutler, Paul (Technical Monitor)

    1997-01-01

    A variety of different network technologies and topologies are currently being evaluated as part of the Whitney Project. This paper reports on the implementation and performance of a Fast Ethernet network configured in a 4x4 2D torus topology in a testbed cluster of 'commodity' Pentium Pro PCs. Several benchmarks were used for performance evaluation: an MPI point to point message passing benchmark, an MPI collective communication benchmark, and the NAS Parallel Benchmarks version 2.2 (NPB2). Our results show that for point to point communication on an unloaded network, the hub and 1 hop routes on the torus have about the same bandwidth and latency. However, the bandwidth decreases and the latency increases on the torus for each additional route hop. Collective communication benchmarks show that the torus provides roughly four times more aggregate bandwidth and eight times faster MPI barrier synchronizations than a hub based network for 16 processor systems. Finally, the SOAPBOX benchmarks, which simulate real-world CFD applications, generally demonstrated substantially better performance on the torus than on the hub. In the few cases the hub was faster, the difference was negligible. In total, our experimental results lead to the conclusion that for Fast Ethernet networks, the torus topology has better performance and scales better than a hub based network.

  4. Ethernet susceptibility to electric fast transients

    NARCIS (Netherlands)

    van Leersum, B.J.A.M.; Buesink, Frederik Johannes Karel; Bergsma, J.G.; Leferink, Frank Bernardus Johannes

    2013-01-01

    The effect of Electric Fast Transients (EFT) phenomena in an Ethernet interface set-up is investigated in order to get more insight in coupling and interference mechanisms, robustness and susceptibility levels of a typical Ethernet installation on board of a naval vessel. It is shown that already a

  5. Analysis of 100Mb/s Ethernet for the Whitney Commodity Computing Testbed

    Science.gov (United States)

    Fineberg, Samuel A.; Pedretti, Kevin T.; Kutler, Paul (Technical Monitor)

    1997-01-01

    We evaluate the performance of a Fast Ethernet network configured with a single large switch, a single hub, and a 4x4 2D torus topology in a testbed cluster of "commodity" Pentium Pro PCs. We also evaluated a mixed network composed of ethernet hubs and switches. An MPI collective communication benchmark, and the NAS Parallel Benchmarks version 2.2 (NPB2) show that the torus network performs best for all sizes that we were able to test (up to 16 nodes). For larger networks the ethernet switch outperforms the hub, though its performance is far less than peak. The hub/switch combination tests indicate that the NAS parallel benchmarks are relatively insensitive to hub densities of less than 7 nodes per hub.

  6. Performance Evaluation of a Field Programmable Gate Array-Based System for Detecting and Tracking Peer-to-Peer Protocols on a Gigabit Ethernet Network

    Science.gov (United States)

    2010-06-01

    20 2.3.5 The Onion Router Network . . . . . . . . . . . 21 2.4 Current Methods for Detecting Illicit Traffic . . . . . . . 21...Internet Relay Chat (IRC), and gaming applications, so those application layer protocols are ignored [KBFC04]. The second metric is observing...trusted users to securely trade possibly illicit or illegal files with each other [WAS09]. 2.3.5 The Onion Router Network. The last method of obfuscating

  7. Mapping Technology Space by Normalizing Patent Networks

    OpenAIRE

    Alstott, Jeff; Triulzi, Giorgio; Yan, Bowen; Luo, Jianxi

    2015-01-01

    Technology is a complex system, with technologies relating to each other in a space that can be mapped as a network. The technology network's structure can reveal properties of technologies and of human behavior, if it can be mapped accurately. Technology networks have been made from patent data, using several measures of proximity. These measures, however, are influenced by factors of the patenting system that do not reflect technologies or their proximity. We introduce a method to precisely...

  8. Mapping Technology Space by Normalizing Technology Relatedness Networks

    CERN Document Server

    Alstott, Jeff; Yan, Bowen; Luo, Jianxi

    2015-01-01

    Technology is a complex system, with technologies relating to each other in a space that can be mapped as a network. The technology relatedness network's structure can reveal properties of technologies and of human behavior, if it can be mapped accurately. Technology networks have been made from patent data, using several measures of relatedness. These measures, however, are influenced by factors of the patenting system that do not reflect technologies or their relatedness. We created technology networks that precisely controlled for these impinging factors and normalized them out, using data from 3.9 million patents. The normalized technology relatedness networks were sparse, with only ~20% of technology domain pairs more related than would be expected by chance. Different measures of technology relatedness became more correlated with each other after normalization, approaching a single dimension of technology relatedness. The normalized network corresponded with human behavior: we analyzed the patenting his...

  9. Europeans build 10-GigE network

    CERN Multimedia

    2003-01-01

    " CERN, SURFnet and the University of Amsterdam announced that they have succeeded in building and testing a Trans European 10 Gbps Ethernet (10 GE) network. Crossing four countries and spanning 1700 km, the network uses the new 10 GE WAN PHY transmission technology capable of transmitting the equivalent of 1.5 complete data CDs every second" (1 page).

  10. CCTV networking and digital technology

    CERN Document Server

    Damjanovski, Vlado

    2005-01-01

    Closed circuit television (CCTV) is experiencing a leap in technology using digital techniques, networking and the Internet. The new edition of this high-level professional reference retains the particulars that made the first edition a success, including the details of CCD cameras, lenses, coaxial cables, fiber-optics, and system design, but it is expanded to cover all video compression techniques used in the ever increasing assortment of digital video recorders (DVRs) available on the market today. This new edition of the book CCTV demystifies DVR technology. It also serves to clarify the te

  11. SISTEM MONITOR DAN KENDALI RUANG SERVER DENGAN EMBEDDED ETHERNET

    Directory of Open Access Journals (Sweden)

    A.A. Ketut Agung Cahyawan W

    2012-11-01

    Full Text Available Selama ini seorang network administrator harus berada pada ruang server jika ingin menyalakan server yang ada disana, atau memeriksa apakah temperatur ruang server sudah cukup agak server dapat bekerja optimal. Permasalahan timbul karena ruang server biasanya terletak cukup jauh dan harus selalu terkunci demi alasan keamanan. Pada penelitian ini dirancang suatu sistem kendali dan monitor yang dapat menyalakan server dari jarak jauh sekaligus memantau suhu ruangan server, menaikkan atau menurunkan temperatur AC dan juga mematikan dan menghidupkannya. Desain yang dibuat berbasis Arduino Duemilanove dan Arduino Ethernet Shield, yang merupakan suatu platform kit elektronik yang open source. Dengan sistem ini seorang network administrator dapat melakukan kontrol ruang server dari jarak jauh.

  12. Real Time FPGA-Based Ethernet Control Communication for Robotic Arm

    Directory of Open Access Journals (Sweden)

    Ishak Mohamad Khairi

    2017-01-01

    Full Text Available In this paper, an approach for real time control communication using Ethernet is proposed. The strategy to support this at the network level and include Field Programmable Gate Array (FPGA implementation on the Ethernet platform for robotic arm. An embedded Ethernet controller is designed to send data packet via Ethernet Local Area Network (LAN. The transferring data also employs Arduino Mega as the medium of communication between FPGA board and the robotic arm. It is used as the receiver to receive data packet from FPGA board with the interface of Arduino Ethernet shield. The control operation on the robotic arm is performed once the desired data packet length is reached to the Arduino Mega. SolidWorks and MATLAB software are used to design the robotic arm and simulate the robotic arm working flexibility in real world respectively. The result of the average data packet delay between FPGA boards is lower in comparison to Arduiono board. The data packet can send successfully in through the network to test the robotic arm.

  13. Technological Developments in Networking, Education and Automation

    CERN Document Server

    Elleithy, Khaled; Iskander, Magued; Kapila, Vikram; Karim, Mohammad A; Mahmood, Ausif

    2010-01-01

    "Technological Developments in Networking, Education and Automation" includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the following areas: Computer Networks: Access Technologies, Medium Access Control, Network architectures and Equipment, Optical Networks and Switching, Telecommunication Technology, and Ultra Wideband Communications. Engineering Education and Online Learning: including development of courses and systems for engineering, technical and liberal studies programs; online laboratories; intelligent

  14. Networking Technologies and the Rate of Technological Change

    Directory of Open Access Journals (Sweden)

    Charles Mitchell

    2005-12-01

    Full Text Available Network technology is changing rapidly and those adept at ICT analysis need resolve rate of change issues. Developments in networking now are in the direction of heuristic intelligence. Since about 1980, networking techniques have encouraged combining bits of information with imagination cognitively to improve ideas about reality. ICT enterprise projects utilize networking to sustain requisite imagination. Assumptions and misassuptions of project builders are rationally comprehended as networking sustains creative processes. The monopolization of valuable network techniques influences in the direction of esoteric networking. Data presents that substantial knowledge and networking is now occurring globally. As a netaphor, networking

  15. Evaluating innovation networks in emerging technologies

    NARCIS (Netherlands)

    Valk, T. van der; Chappin, M.M.H.; Gijsbers, G.W.

    2011-01-01

    Interorganisational innovation networks are increasingly important for innovation in emerging technology fields. The performance of such networks can have a large impact on the future development of emerging technologies. A useful framework for the evaluation of innovation networks however does not

  16. Ethernet Flow Monitoring with IPFIX

    NARCIS (Netherlands)

    Hofstede, R.J.; Drago, Idilio; Sperotto, Anna; Pras, Aiko

    The increasing amount of network traffic and the huge bandwidth needed to carry it requires managers to use scalable solutions to monitor their networks. Nowadays, flow-based techniques, such as Cisco’s NetFlow, provide aggregated network data and an overview of network activity at the IP layer.

  17. Protected Core Networking Concepts & Challenges

    Science.gov (United States)

    2010-11-01

    Ethernet frames over the un-trusted bearer network. This transformation from PDH/ SDH services to Ethernet Frame based Services (VPWS, VPLS) requires...transformation of legacy bearer networks services (Vxx, PDH, SDH ) to wide area advanced Ethernet Services (VPWS and VPLS). REFERENCES [NNEC]: NATO

  18. Implementing Ethernet Services on the Payload Executive Processor (PEP)

    Science.gov (United States)

    Pruett, David; Guyette, Greg

    2016-01-01

    The Ethernet interface is more common and easier interface to implement for payload developers already familiar with Ethernet protocol in their labs. The Ethernet interface allows for a more distributed payload architecture. Connections can be placed in locations not serviced by the PEP 1553 bus. The Ethernet interface provides a new access port into the PEP so as to use the already existing services. Initial capability will include a subset of services with a plan to expand services later.

  19. Wireless network technologies toward 5G

    National Research Council Canada - National Science Library

    Dai Kimura; Hiroyuki Seki; Tokuro Kubo; Tomohiko Taniguchi

    2015-01-01

    .... The 5G wireless network is expected to become a "Heterogeneous Network" where new wireless access technologies incompatible with 4G and the wireless access technologies for unlicensed band are incorporated with the enhanced technology of 4G (e.g. IMT-advanced). This paper introduces the vision and technology trends of 5G, shows key directions of the research and development of 5G in the future, and introduces some of our studies on 5G.

  20. Implementation of an Ethernet-Based Communication Channel for the Patmos Processor

    DEFF Research Database (Denmark)

    Pezzarossa, Luca; Kenn Toft, Jakob; Lønbæk, Jesper

    The Patmos processor, which is used as the intellectual property of the T-CREST platform, is only equipped with a RS-232 serial port for communication with the outside world. The serial port is a minimal input/output device with a limited speed and without native networking features. An Ethernet 10...

  1. Replacing the Ethernet access mechanism with the real-time access mechanism of Twentenet

    NARCIS (Netherlands)

    Pras, Aiko

    1989-01-01

    The way in which a Local Area Network access mechanism (Medium Access Control protocol) designed for a specific type of physical service can be used on top of another type of physical service is discussed using a particular example. In the example, an Ethernet physical layer is used to provide

  2. Optical frame synchronizer for 10 G Ethernet packets aiming at 1 Tb/s OTDM Ethernet

    DEFF Research Database (Denmark)

    Hu, Hao; Palushani, Evarist; Laguardia Areal, Janaina

    2010-01-01

    Synchronization of 10 G Ethernet packets to a local clock was demonstrated using a phase modulator and a SMF as retiming elements. Error free performances for the synchronized packets with different lengths were achieved.......Synchronization of 10 G Ethernet packets to a local clock was demonstrated using a phase modulator and a SMF as retiming elements. Error free performances for the synchronized packets with different lengths were achieved....

  3. Handbook of social network technologies and applications

    CERN Document Server

    Furht, Borko

    2010-01-01

    Social networking is a concept that has existed for a long time; however, with the explosion of the Internet, social networking has become a tool for people to connect and communicate in ways that were impossible in the past. The recent development of Web 2.0 has provided many new applications, such as Myspace, Facebook, and LinkedIn. The purpose of ""Handbook of Social Networks: Technologies and Applications"" is to provide comprehensive guidelines on the current and future trends in social network technologies and applications in the field of Web-based Social Networks. This handbook includes

  4. Design and Qualification of the Interconnect for a High-Performance Modular 10Gigabit Ethernet Switch

    OpenAIRE

    Oltean, Alexandra Dana; Buzuloiu, V; Martin, B

    2006-01-01

    The 10 Gigabit Ethernet standard, IEEE802.3ae, was adopted in 2002 and represented a ten-fold increase in performance over the previous 1Gigabit standard IEEE 802.3z. The standard itself covers only the details of the individual point-to-point links and does not address any system issues of how Ethernet switches may be built or deployed. Designing a switched system involves choosing an appropriate architecture, selecting the best available silicon technology and determining suitable electroni...

  5. Using networked technologies to support conferences

    OpenAIRE

    Kelly, B.; Tonkin, E.; Shabajee, P

    2005-01-01

    The increasing availability of WiFi networks in conference venues is an opportunity to provide additional services for conference delegates and to enhance and enrich the learning experience. This paper reviews experiences of use of networked applications in a conference environment and outlines a number of potentially useful technologies. The paper addresses potential concerns over use of networked technologies including dangers of disruption and distraction, legal and copyright issues as wel...

  6. RESEARCH OF ENGINEERING TRAFFIC IN COMPUTER UZ NETWORK USING MPLS TE TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    V. M. Pakhomovа

    2014-12-01

    Full Text Available Purpose. In railway transport of Ukraine one requires the use of computer networks of different technologies: Ethernet, Token Bus, Token Ring, FDDI and others. In combined computer networks on the railway transport it is necessary to use packet switching technology in multiprotocol networks MPLS (MultiProtocol Label Switching more effectively. They are based on the use of tags. Packet network must transmit different types of traffic with a given quality of service. The purpose of the research is development a methodology for determining the sequence of destination flows for the considered fragment of computer network of UZ. Methodology. When optimizing traffic management in MPLS networks has the important role of technology traffic engineering (Traffic Engineering, TE. The main mechanism of TE in MPLS is the use of unidirectional tunnels (MPLS TE tunnel to specify the path of the specified traffic. The mathematical model of the problem of traffic engineering in computer network of UZ technology MPLS TE was made. Computer UZ network is represented with the directed graph, their vertices are routers of computer network, and each arc simulates communication between nodes. As an optimization criterion serves the minimum value of the maximum utilization of the TE-tunnel. Findings. The six options destination flows were determined; rational sequence of flows was found, at which the maximum utilization of TE-tunnels considered a simplified fragment of a computer UZ network does not exceed 0.5. Originality. The method of solving the problem of traffic engineering in Multiprotocol network UZ technology MPLS TE was proposed; for different classes its own way is laid, depending on the bandwidth and channel loading. Practical value. Ability to determine the values of the maximum coefficient of use of TE-tunnels in computer UZ networks based on developed software model «TraffEng». The input parameters of the model: number of routers, channel capacity, the

  7. Technology Transfer Network and Affiliations

    Science.gov (United States)

    2003-01-01

    The NASA Technology Transfer Partnership program sponsors a number of organizations around the country that are designed to assist U.S. businesses in accessing, utilizing, and commercializing NASA-funded research and technology. These organizations work closely with the Technology Transfer Offices, located at each of the 10 NASA field centers, providing a full range of technology transfer and commercialization services and assistance.

  8. Implementing 802.11 with microcontrollers wireless networking for embedded systems designers

    CERN Document Server

    Eady, Fred

    2005-01-01

    Wireless networking is poised to have a massive impact on communications, and the 802.11 standard is to wireless networking what Ethernet is to wired networking. There are already over 50 million devices using the dominant IEEE 802.11 (essentially wireless Ethernet) standard, with astronomical growth predicted over the next 10 years. New applications are emerging every day, with wireless capability being embedded in everything from electric meters to hospital patient tracking systems to security devices. This practical reference guides readers through the wireless technology forest, gi

  9. Center for development technology and program in technology and human affairs. [emphasizing technology-based networks

    Science.gov (United States)

    Wong, M. D.

    1974-01-01

    The role of technology in nontraditional higher education with particular emphasis on technology-based networks is analyzed nontraditional programs, institutions, and consortia are briefly reviewed. Nontraditional programs which utilize technology are studied. Technology-based networks are surveyed and analyzed with regard to kinds of students, learning locations, technology utilization, interinstitutional relationships, cost aspects, problems, and future outlook.

  10. 78 FR 17418 - Rural Health Information Technology Network Development Grant

    Science.gov (United States)

    2013-03-21

    ... award under the Rural Health Information Technology Network Development Grant (RHITND) to Grace... relinquishing its fiduciary responsibilities for the Rural Health Information Technology Network Development... HUMAN SERVICES Health Resources and Services Administration Rural Health Information Technology Network...

  11. Networking Technologies for Future Home Networks Using 60 GHz Radio

    NARCIS (Netherlands)

    Wang, J.

    2010-01-01

    Networking technologies have been changing the life of people in their private residential space. With the arrival of high definition (HD) multimedia services and broadband communications into the living space, future home networks are expected to support high speed device-to-device connectivity

  12. Discovering Mobile Social Networks by Semantic Technologies

    Science.gov (United States)

    Jung, Jason J.; Choi, Kwang Sun; Park, Sung Hyuk

    It has been important for telecommunication companies to discover social networks from mobile subscribers. They have attempted to provide a number of recommendation services, but they realized that the services were not successful. In this chapter, we present semantic technologies for discovering social networks. The process is mainly composed of two steps; (1) profile identification and (2) context understanding. Through developing a Next generation Contents dElivery (NICE) platform, we were able to generate various services based on the discovered social networks.

  13. Software Defined Networking Demands on Software Technologies

    DEFF Research Database (Denmark)

    Galinac Grbac, T.; Caba, Cosmin Marius; Soler, José

    2015-01-01

    , we review this new approach to networking from an architectural point of view, and identify and discuss some critical quality issues that require new developments in software technologies. These issues we discuss along with use case scenarios. Here in this paper we aim to identify challenges......Software Defined Networking (SDN) is a networking approach based on a centralized control plane architecture with standardised interfaces between control and data planes. SDN enables fast configuration and reconfiguration of the network to enhance resource utilization and service performances....... This new approach enables a more dynamic and flexible network, which may adapt to user needs and application requirements. To this end, systemized solutions must be implemented in network software, aiming to provide secure network services that meet the required service performance levels. In this paper...

  14. Future networks and technologies supporting innovative communications

    DEFF Research Database (Denmark)

    Prasad, Ramjee

    2012-01-01

    and applications. This paper focuses on the technological aspects of ubiquitous networking and communication technologies, including challenges related to green communications, and security, privacy and trust. The paper proposes a novel concept for a Wireless Innovative System for Dynamically Operating Mega......-communications (WISDOM) that combines the aspects of personal- and cognitive radio- networks to let seamlessly bridge the virtual and physical worlds offering a constant level of all-senses, context-based, rich communication experience over fixed and wireless networks for the end users while realizing a new generation...

  15. Efficient Data Transfer Rate and Speed of Secured Ethernet Interface System.

    Science.gov (United States)

    Ghanti, Shaila; Naik, G M

    2016-01-01

    Embedded systems are extensively used in home automation systems, small office systems, vehicle communication systems, and health service systems. The services provided by these systems are available on the Internet and these services need to be protected. Security features like IP filtering, UDP protection, or TCP protection need to be implemented depending on the specific application used by the device. Every device on the Internet must have network interface. This paper proposes the design of the embedded Secured Ethernet Interface System to protect the service available on the Internet against the SYN flood attack. In this experimental study, Secured Ethernet Interface System is customized to protect the web service against the SYN flood attack. Secured Ethernet Interface System is implemented on ALTERA Stratix IV FPGA as a system on chip and uses the modified SYN flood attack protection method. The experimental results using Secured Ethernet Interface System indicate increase in number of genuine clients getting service from the server, considerable improvement in the data transfer rate, and better response time during the SYN flood attack.

  16. Efficient Data Transfer Rate and Speed of Secured Ethernet Interface System

    Science.gov (United States)

    Ghanti, Shaila

    2016-01-01

    Embedded systems are extensively used in home automation systems, small office systems, vehicle communication systems, and health service systems. The services provided by these systems are available on the Internet and these services need to be protected. Security features like IP filtering, UDP protection, or TCP protection need to be implemented depending on the specific application used by the device. Every device on the Internet must have network interface. This paper proposes the design of the embedded Secured Ethernet Interface System to protect the service available on the Internet against the SYN flood attack. In this experimental study, Secured Ethernet Interface System is customized to protect the web service against the SYN flood attack. Secured Ethernet Interface System is implemented on ALTERA Stratix IV FPGA as a system on chip and uses the modified SYN flood attack protection method. The experimental results using Secured Ethernet Interface System indicate increase in number of genuine clients getting service from the server, considerable improvement in the data transfer rate, and better response time during the SYN flood attack. PMID:28116350

  17. Mobile Networking Technology Within INSC

    National Research Council Canada - National Science Library

    Macker, Joseph P

    2003-01-01

    We provide an overview of the INSC Mobility Task area efforts including: a brief overview of technology areas investigated, a discussion of research developments, and example results from experimentation and demonstration...

  18. Ultra wideband technology for wireless sensor networks

    Science.gov (United States)

    Wang, Yue; Xiong, Weiming

    2011-08-01

    Wireless sensor networks (WSNs) have emerged as an important method for planetary surface exploration. To investigate the optimized wireless technology for WSNs, we summarized the key requirements of WSNs and justified ultra wideband (UWB) technology by comparing with other competitive wireless technologies. We also analyzed network topologies as well as physical and MAC layer designs of IEEE 802.15.4a standard, which adopted impulse radio UWB (IR-UWB) technology. Our analysis showed that IR-UWB-based 802.15.4a standard could enable robust communication, precise ranging, and heterogeneous networking for WSNs applications. The result of our present work implies that UWB-based WSNs can be applied to future planetary surface exploration.

  19. Design and Qualification of the Interconnect for a High-Performance Modular 10Gigabit Ethernet Switch

    CERN Document Server

    Oltean, Alexandra Dana; Martin, B

    2006-01-01

    The 10 Gigabit Ethernet standard, IEEE802.3ae, was adopted in 2002 and represented a ten-fold increase in performance over the previous 1Gigabit standard IEEE 802.3z. The standard itself covers only the details of the individual point-to-point links and does not address any system issues of how Ethernet switches may be built or deployed. Designing a switched system involves choosing an appropriate architecture, selecting the best available silicon technology and determining suitable electronic packaging. The EU funded ESTA project was established to perform the basic research and development that would define the specifications for building an Ethernet switch to meet 10Gbps switching requirements. The part of the project carried out at CERN, within which this thesis work was done, involved the development, construction and validation of the backplane support for this 10Gbps Ethernet switch. In addition the program required that there be developed an understanding of where the limits of performance lay in term...

  20. Network operating system focus technology

    Science.gov (United States)

    1985-01-01

    An activity structured to provide specific design requirements and specifications for the Space Station Data Management System (DMS) Network Operating System (NOS) is outlined. Examples are given of the types of supporting studies and implementation tasks presently underway to realize a DMS test bed capability to develop hands-on understanding of NOS requirements as driven by actual subsystem test beds participating in the overall Johnson Space Center test bed program. Classical operating system elements and principal NOS functions are listed.

  1. Systems engineering technology for networks

    Science.gov (United States)

    1994-01-01

    The report summarizes research pursued within the Systems Engineering Design Laboratory at Virginia Polytechnic Institute and State University between May 16, 1993 and January 31, 1994. The project was proposed in cooperation with the Computational Science and Engineering Research Center at Howard University. Its purpose was to investigate emerging systems engineering tools and their applicability in analyzing the NASA Network Control Center (NCC) on the basis of metrics and measures.

  2. Networking Technologies for Future Home Networks Using 60 GHz Radio

    OpenAIRE

    Wang, J.

    2010-01-01

    Networking technologies have been changing the life of people in their private residential space. With the arrival of high definition (HD) multimedia services and broadband communications into the living space, future home networks are expected to support high speed device-to-device connectivity with Quality-of-Service (QoS) provisioning. There is no prize for guessing that it has to be wireless communication which creates maximal freedom. Nevertheless, it is doubtful that today's home networ...

  3. Networking and Information Technology Workforce Study: Final Report

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — This report presents the results of a study of the global Networking and Information Technology NIT workforce undertaken for the Networking and Information...

  4. Gigabit Ethernet Asynchronous Clock Compensation FIFO

    Science.gov (United States)

    Duhachek, Jeff

    2012-01-01

    Clock compensation for Gigabit Ethernet is necessary because the clock recovered from the 1.25 Gb/s serial data stream has the potential to be 200 ppm slower or faster than the system clock. The serial data is converted to 10-bit parallel data at a 125 MHz rate on a clock recovered from the serial data stream. This recovered data needs to be processed by a system clock that is also running at a nominal rate of 125 MHz, but not synchronous to the recovered clock. To cross clock domains, an asynchronous FIFO (first-in-first-out) is used, with the write pointer (wprt) in the recovered clock domain and the read pointer (rptr) in the system clock domain. Because the clocks are generated from separate sources, there is potential for FIFO overflow or underflow. Clock compensation in Gigabit Ethernet is possible by taking advantage of the protocol data stream features. There are two distinct data streams that occur in Gigabit Ethernet where identical data is transmitted for a period of time. The first is configuration, which happens during auto-negotiation. The second is idle, which occurs at the end of auto-negotiation and between every packet. The identical data in the FIFO can be repeated by decrementing the read pointer, thus compensating for a FIFO that is draining too fast. The identical data in the FIFO can also be skipped by incrementing the read pointer, which compensates for a FIFO draining too slowly. The unique and novel features of this FIFO are that it works in both the idle stream and the configuration streams. The increment or decrement of the read pointer is different in the idle and compensation streams to preserve disparity. Another unique feature is that the read pointer to write pointer difference range changes between compensation and idle to minimize FIFO latency during packet transmission.

  5. Organizing for Networked Information Technologies

    DEFF Research Database (Denmark)

    The book provides seven practical examples of how Danish companies implemented new information technology in order to transform their internal and external business processes. The purpose is to share some of the companies' concerns and hopes during this implementation process, with each case...

  6. Stationarity Testing of Accumulated Ethernet Traffic

    Directory of Open Access Journals (Sweden)

    Zhiping Lu

    2013-01-01

    Full Text Available We investigate the stationarity property of the accumulated Ethernet traffic series. We applied several widely used stationarity and unit root tests, such as Dickey-Fuller test and its augmented version, Phillips-Perron test, as well as the Kwiatkowski-Phillips-Schmidt-Shin test and some of its generalizations, to the assessment of the stationarity of the traffic traces at the different time scales. The quantitative results in this research provide evidence that when the time scale increases, the accumulated traffic series are more stationary.

  7. Optical Network Technologies for Future Digital Cinema

    Directory of Open Access Journals (Sweden)

    Sajid Nazir

    2016-01-01

    Full Text Available Digital technology has transformed the information flow and support infrastructure for numerous application domains, such as cellular communications. Cinematography, traditionally, a film based medium, has embraced digital technology leading to innovative transformations in its work flow. Digital cinema supports transmission of high resolution content enabled by the latest advancements in optical communications and video compression. In this paper we provide a survey of the optical network technologies for supporting this bandwidth intensive traffic class. We also highlight the significance and benefits of the state of the art in optical technologies that support the digital cinema work flow.

  8. Reliance communications' flag telecom to provide ethernet link between CERN and TIFR

    CERN Multimedia

    2007-01-01

    "Flag Telecom Group Limited (Flag), the undersea cable network arm of Anil Ambani-le Reliance Communications, has announced a landmark deal with CERn (Conseil Européen pour la Recheche Nucléaire), the European organisation for nuclear research based in Geneva, Switzerland and the Tata institute of Fundamental Research (TIFR) in Mumbai to provide gigabit Ethernet connectivity between the two." (1 page)

  9. Design of a data transmission system based on gigabit ethernet

    Science.gov (United States)

    Yuan, Yongxin; Zhang, Lijun; Xu, Bin; Wang, Jiqiang; Yuan, Yonggang

    2013-09-01

    FPGA(Field-programmable gate array) is programmable device, characterized by high speed and reconfiguration. We could test the circuit programmed by HDL (Hardware Description Language). By observing results of simulations through ModelSim, developers could fix logic errors. Also, they could analyze performance of circuits by the results. In the system, we build the Gigabit Ethernet development platform based on a FPGA. This paper presents the technique of FPGA and Gigabit Ethernet, as well as relevant techniques. On the basis of merits and drawbacks of different design proposals and real demands, we take the EP3C10E144C8N chip belonging to the series of Cyclone III produced by Altera corp. as main controller chip. By the use of an AX88180 MAC chip produced by ASIX Electronics Corporation and a RTL8211E physical chip by Realtek Semiconductor Corporation, we build the development platform. At the receiving end, we capture data frames from the network adapter by winpcap programming and throw video data in the buffer. Considering large amounts of data in the real-time transportation, we design fixed-length queue as the primary structures for buffer. Size of a buffer unit is 32KB, which means that 32 packets can fill the buffer. When the buffer is full, we put the buffer unit to the end of the queue. We get data from buffer and hand it over to application process to display and store video data. When packet loss is detected by the system, log file will record it and thus we can check how many packets lose. The simulations by Quartus II and practical application proves that the system is stable, featuring high speed and low cost. It can be used in various high speed real-time transmission with little modification.

  10. Contribución para QoS en Redes Metropolitanas Ethernet

    Directory of Open Access Journals (Sweden)

    Omar Álvarez

    2007-11-01

    Full Text Available Los sistemas de control de acceso (ACS permiten apoyar las soluciones actuales de Calidad de Servicio. Éstos consideran entre sus variables el retardo, variación de retardo, pérdida de paquetes o una combinación para asegurar los requerimientos de calidad de servicio para sesiones de voz y video. Proponemos un ACS basado en la pérdida de paquetes de prueba extremo a extremo para la decisión de aceptar nuevas sesiones. La red de transporte será la familia Ethernet, la cual ha incursionado de manera importante en los ámbitos metropolitanos (802.3ae. El presente trabajo muestra la interoperatividad y ventajas de ME-ACS con MPLS./ The access control systems (ACS are useful to improve the Quality of Service solutions. These systems are generally based on delay, jitter or packet loss, employing more of these criteria to maintain the required quality of service requiring for voice or video sessions. We propose an ACS that employs packet loss between probes that send an end-to-end test stream before accepting additional sessions. We used Ethernet as our transport network because the 803.3ae is widely used in metropolitan area networks. This paper presents how the ACS will interoperate with MPLS and describe the improvements related to its use in a metropolitan Ethernet network.

  11. Autonomous vision networking: miniature wireless sensor networks with imaging technology

    Science.gov (United States)

    Messinger, Gioia; Goldberg, Giora

    2006-09-01

    The recent emergence of integrated PicoRadio technology, the rise of low power, low cost, System-On-Chip (SOC) CMOS imagers, coupled with the fast evolution of networking protocols and digital signal processing (DSP), created a unique opportunity to achieve the goal of deploying large-scale, low cost, intelligent, ultra-low power distributed wireless sensor networks for the visualization of the environment. Of all sensors, vision is the most desired, but its applications in distributed sensor networks have been elusive so far. Not any more. The practicality and viability of ultra-low power vision networking has been proven and its applications are countless, from security, and chemical analysis to industrial monitoring, asset tracking and visual recognition, vision networking represents a truly disruptive technology applicable to many industries. The presentation discusses some of the critical components and technologies necessary to make these networks and products affordable and ubiquitous - specifically PicoRadios, CMOS imagers, imaging DSP, networking and overall wireless sensor network (WSN) system concepts. The paradigm shift, from large, centralized and expensive sensor platforms, to small, low cost, distributed, sensor networks, is possible due to the emergence and convergence of a few innovative technologies. Avaak has developed a vision network that is aided by other sensors such as motion, acoustic and magnetic, and plans to deploy it for use in military and commercial applications. In comparison to other sensors, imagers produce large data files that require pre-processing and a certain level of compression before these are transmitted to a network server, in order to minimize the load on the network. Some of the most innovative chemical detectors currently in development are based on sensors that change color or pattern in the presence of the desired analytes. These changes are easily recorded and analyzed by a CMOS imager and an on-board DSP processor

  12. Low level gigabit Ethernet analysis for the LHCb computing farm

    CERN Document Server

    Walravens, Cedric

    2006-01-01

    This note presents the concept of Receive Descriptor Recycling to significantly reduce the performance drop associated with small packet Gigabit Ethernet traffic. High reliability of small-sized transmissions is crucial for correct calibration runs of the LHCb experiment, at the CERN LHC accelerator. Previous work applied to full link load Ethernet traffic, using UDP processes. This work covers more low-level details of the performance problem for small-sized traffic, using more lower-level Ethernet frames, and, with a deeper analysis at the PCI/PCI-X level. Measurements were performed at the LHCb online system, which is to a large extend made up of commodity equipment. Limits and trade-offs are inherent when optimising for small packet traffic. All important aspects in this context are covered. Results gathered show the Ethernet Controller's driver currently is the major bottleneck, preventing the system from reaching maximal Gigabit Ethernet performance. Receive Descriptor Recycling is implemented in the dr...

  13. Fast optical channel recovery in field demonstration of 100-Gbit/s Ethernet over OTN using real-time DSP.

    Science.gov (United States)

    Yamazaki, Etsushi; Yamanaka, Shogo; Kisaka, Yoshiaki; Nakagawa, Tadao; Murata, Koichi; Yoshida, Eiji; Sakano, Toshikazu; Tomizawa, Masahito; Miyamoto, Yutaka; Matsuoka, Shinji; Matsui, Junichiro; Shibayama, Atsufumi; Abe, Jun-ichi; Nakamura, Yuichi; Noguchi, Hidemi; Fukuchi, Kiyoshi; Onaka, Hiroshi; Fukumitsu, Katsumi; Komaki, Kousuke; Takeuchi, Osamu; Sakamoto, Yuichiro; Nakashima, Hisao; Mizuochi, Takashi; Kubo, Kazuo; Miyata, Yoshikuni; Nishimoto, Hiroshi; Hirano, Susumu; Onohara, Kiyoshi

    2011-07-04

    A field trial of 100-Gbit/s Ethernet over an optical transport network (OTN) is conducted using a real-time digital coherent signal processor. Error free operation with the Q-margin of 3.2 dB is confirmed at a 100 Gbit/s Ethernet analyzer by concatenating a low-density parity-check code with a OTN framer forward error correction, after 80-ch WDM transmission through 6 spans x 70 km of dispersion shifted fiber without inline-dispersion compensation. Also, the recovery time of 12 msec is observed in an optical route switching experiment, which is achieved through fast chromatic dispersion estimation functionality.

  14. Using Citation Network Analysis in Educational Technology

    Science.gov (United States)

    Cho, Yonjoo; Park, Sunyoung

    2012-01-01

    Previous reviews in the field of Educational Technology (ET) have revealed some publication patterns according to authors, institutions, and affiliations. However, those previous reviews focused only on the rankings of individual authors and institutions, and did not provide qualitative details on relations and networks of scholars and scholarly…

  15. Group colocation behavior in technological social networks.

    Directory of Open Access Journals (Sweden)

    Chloë Brown

    Full Text Available We analyze two large datasets from technological networks with location and social data: user location records from an online location-based social networking service, and anonymized telecommunications data from a European cellphone operator, in order to investigate the differences between individual and group behavior with respect to physical location. We discover agreements between the two datasets: firstly, that individuals are more likely to meet with one friend at a place they have not visited before, but tend to meet at familiar locations when with a larger group. We also find that groups of individuals are more likely to meet at places that their other friends have visited, and that the type of a place strongly affects the propensity for groups to meet there. These differences between group and solo mobility has potential technological applications, for example, in venue recommendation in location-based social networks.

  16. Internetworking technological foundations and applications

    CERN Document Server

    Meinel, Christoph

    2013-01-01

    This book is supposed to serve as a comprehensive and instructive guide through the new world of digital communication. On the physical layer optical and electrical cabling technology are described as well as wireless communication technologies. On the data link layer local area networks (LANs) are introduced together with the most popular LAN technologies such as Ethernet, Token Ring, FDDI, and ATM as well as wireless LAN technologies including IEEE 802.x, Bluetooth, or ZigBee. A wide range of WAN technologies are covered including contemporary high speed technologies like PDH and SDH up to h

  17. Efficient power supply using Power over Ethernet; Effiziente Stromversorgung mittels Power over Ethernet (PoE)

    Energy Technology Data Exchange (ETDEWEB)

    Huser, A.

    2005-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) takes a look at methods of supplying small equipment such as Internet telephones, web cams, hubs, hard discs, audio equipment, point-of-sale terminals, game consoles etc. with power via their Ethernet connections. A short comparison is presented between Power over Ethernet (PoE) and other methods of supplying power along with data, including Universal Serial Bus (USB), FireWire and Powerline systems. The advantages of PoE over the use of separate power supply units are discussed and recommendations are made to the manufacturers and users of small peripheral equipment regarding the dimensioning and loading of such power supply systems.

  18. DDN (Defence Data Network) Protocol Implementations and Vendors Guide

    Science.gov (United States)

    1988-08-01

    Artificial Intelligence Laboratory Room NE43-723 545 Technology Square Cambridge, MA 02139 (617) 253-8843 S John Wroclawski, (JTW@AI.AJ.MIT.EDU...Massachusetts Institute of Technology Artificial Intelligence Laboratory Room NE43-743 545 Technology Square 0 Cambridge, MA 02139 (617) 253-7885 ORDERING...TCP/IP Network Software for PC-DOS Systems CPU: IBM-PC/XT/AT/compatible in conjunction with EXOS 205 Inteligent Ethernet Controller for PCbus 0/s

  19. Composite network using PLC and SCM technologies

    Science.gov (United States)

    Tsuchiya, Toshiyuki; Ohno, Kazuyoshi; Shiraishi, Takashi; Okada, Masaya

    1993-02-01

    The study of integrated opto-electrical circuits has lead to the evolution of silica-based planer lightwave circuit (PLC) technology. PLC technology can be applied to the filtering of optical signals. Optical filters for AM-FDM signals that use the subcarrier multiplexing (SCM) technique can access two optical carrier wavelengths simultaneously, and can be used with point-to-multipoint wiring using coaxial cable to home videos. The use of optical fibers in subscriber networks has become a priority in telecommunications and video transmissions. In our network, the optical network unit (ONU) which is installed in an outside plant is designed so that three kinds of optical fiber systems are terminated simultaneously. They are for the video fiber backbone, personal communications and narrow band ISDN. The radius of the service area offered by the ONU is a few hundred meters. This network configuration is suitable for powering and operation, administration and maintenance (OA&M) from the viewpoint of feeder fiber network design.

  20. Ethernet-Enabled Power and Communication Module for Embedded Processors

    Science.gov (United States)

    Perotti, Jose; Oostdyk, Rebecca

    2010-01-01

    The power and communications module is a printed circuit board (PCB) that has the capability of providing power to an embedded processor and converting Ethernet packets into serial data to transfer to the processor. The purpose of the new design is to address the shortcomings of previous designs, including limited bandwidth and program memory, lack of control over packet processing, and lack of support for timing synchronization. The new design of the module creates a robust serial-to-Ethernet conversion that is powered using the existing Ethernet cable. This innovation has a small form factor that allows it to power processors and transducers with minimal space requirements.

  1. Radiation Hardened 10BASE-T Ethernet Physical Layer (PHY)

    Science.gov (United States)

    Lin, Michael R. (Inventor); Petrick, David J. (Inventor); Ballou, Kevin M. (Inventor); Espinosa, Daniel C. (Inventor); James, Edward F. (Inventor); Kliesner, Matthew A. (Inventor)

    2017-01-01

    Embodiments may provide a radiation hardened 10BASE-T Ethernet interface circuit suitable for space flight and in compliance with the IEEE 802.3 standard for Ethernet. The various embodiments may provide a 10BASE-T Ethernet interface circuit, comprising a field programmable gate array (FPGA), a transmitter circuit connected to the FPGA, a receiver circuit connected to the FPGA, and a transformer connected to the transmitter circuit and the receiver circuit. In the various embodiments, the FPGA, transmitter circuit, receiver circuit, and transformer may be radiation hardened.

  2. Controlling technology costs as integrated networks expand.

    Science.gov (United States)

    Halverson, K

    1995-01-01

    The expansion of integrated healthcare networks is changing the way radiology technology should be acquired and maintained. Some significant effects are that utilization will decline with managed care; the radiology department is now a cost center, not a source of revenue; and integrated networks find themselves with redundant technology and excess radiology equipment. While hospitals shoulder additional financial risk associated with managed care, responsibility for finding solutions to new problems falls to the radiology administrator. Administrators can take the following steps to effectively reduce expense and risk: Understand current usage. Eliminate redundancies. Prioritize modalities. Find new financing opportunities. Lease equipment. Purchase reconditioned equipment. Redeploy assets instead of buying new. Radiology administrators who view these problems as a challenging puzzle will naturally explore creative options. They will provide the greatest flexibility and best position for their department's contributions to the hospital's overall strategic goals.

  3. TTEthernet for Integrated Spacecraft Networks

    Science.gov (United States)

    Loveless, Andrew

    2015-01-01

    Aerospace projects have traditionally employed federated avionics architectures, in which each computer system is designed to perform one specific function (e.g. navigation). There are obvious downsides to this approach, including excessive weight (from so much computing hardware), and inefficient processor utilization (since modern processors are capable of performing multiple tasks). There has therefore been a push for integrated modular avionics (IMA), in which common computing platforms can be leveraged for different purposes. This consolidation of multiple vehicle functions to shared computing platforms can significantly reduce spacecraft cost, weight, and design complexity. However, the application of IMA principles introduces significant challenges, as the data network must accommodate traffic of mixed criticality and performance levels - potentially all related to the same shared computer hardware. Because individual network technologies are rarely so competent, the development of truly integrated network architectures often proves unreasonable. Several different types of networks are utilized - each suited to support a specific vehicle function. Critical functions are typically driven by precise timing loops, requiring networks with strict guarantees regarding message latency (i.e. determinism) and fault-tolerance. Alternatively, non-critical systems generally employ data networks prioritizing flexibility and high performance over reliable operation. Switched Ethernet has seen widespread success filling this role in terrestrial applications. Its high speed, flexibility, and the availability of inexpensive commercial off-the-shelf (COTS) components make it desirable for inclusion in spacecraft platforms. Basic Ethernet configurations have been incorporated into several preexisting aerospace projects, including both the Space Shuttle and International Space Station (ISS). However, classical switched Ethernet cannot provide the high level of network

  4. Fuzzy logic and neural network technologies

    Science.gov (United States)

    Villarreal, James A.; Lea, Robert N.; Savely, Robert T.

    1992-01-01

    Applications of fuzzy logic technologies in NASA projects are reviewed to examine their advantages in the development of neural networks for aerospace and commercial expert systems and control. Examples of fuzzy-logic applications include a 6-DOF spacecraft controller, collision-avoidance systems, and reinforcement-learning techniques. The commercial applications examined include a fuzzy autofocusing system, an air conditioning system, and an automobile transmission application. The practical use of fuzzy logic is set in the theoretical context of artificial neural systems (ANSs) to give the background for an overview of ANS research programs at NASA. The research and application programs include the Network Execution and Training Simulator and faster training algorithms such as the Difference Optimized Training Scheme. The networks are well suited for pattern-recognition applications such as predicting sunspots, controlling posture maintenance, and conducting adaptive diagnoses.

  5. Radiation Hardened Ethernet PHY and Switch Fabric Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Innoflight will develop a new family of radiation hardened (up to 3 Mrad(Si)), fault-tolerant, high data-rate (up to 8 Gbps), low power Gigabit Ethernet PHY and...

  6. Network Gateway Technology: The Issue of Redundancy towards ...

    African Journals Online (AJOL)

    The Internet has provided advancement in the areas of network and networking facilities. Everyone connected to the Internet is concerned about two basic things: the availability of network services and the speed of the network. Network gateway redundancy technology falls within these categories and happens to be one of ...

  7. A Lossless Network for Data Acquisition

    CERN Document Server

    AUTHOR|(SzGeCERN)698154; The ATLAS collaboration; Lehmann Miotto, Giovanna

    2017-01-01

    The bursty many-to-one communication pattern, typical for data acquisition systems, is particularly demanding for commodity TCP/IP and Ethernet technologies. We expand the study of lossless switching in software running on commercial-off-the-shelf servers, using the ATLAS experiment as a case study. In this paper we extend the popular software switch, Open vSwitch, with a dedicated, throughput-oriented buffering mechanism for data acquisition. We compare the performance under heavy congestion on typical Ethernet switches to a commodity server acting as a switch. Our results indicate that software switches with large buffers perform significantly better. Next, we evaluate the scalability of the system when building a larger topology of interconnected software switches, exploiting the integration with software-defined networking technologies. We build an IP-only leaf-spine network consisting of eight software switches running on separate physical servers as a demonstrator.

  8. A Lossless Network for Data Acquisition

    Science.gov (United States)

    Jereczek, Grzegorz; Lehmann Miotto, Giovanna; Malone, David; Walukiewicz, Miroslaw

    2017-06-01

    The bursty many-to-one communication pattern, typical for data acquisition systems, is particularly demanding for commodity TCP/IP and Ethernet technologies. We expand the study of lossless switching in software running on commercial off-the-shelf servers, using the ATLAS experiment as a case study. In this paper, we extend the popular software switch, Open vSwitch, with a dedicated, throughput-oriented buffering mechanism for data acquisition. We compare the performance under heavy congestion on typical Ethernet switches to a commodity server acting as a switch. Our results indicate that software switches with large buffers perform significantly better. Next, we evaluate the scalability of the system when building a larger topology of interconnected software switches, exploiting the integration with software-defined networking technologies. We build an IP-only leaf-spine network consisting of eight software switches running on distinct physical servers as a demonstrator.

  9. High Performance Gigabit Ethernet Switches for DAQ Systems

    CERN Document Server

    Barczyk, Artur

    2005-01-01

    Commercially available high performance Gigabit Ethernet (GbE) switches are optimized mostly for Internet and standard LAN application traffic. DAQ systems on the other hand usually make use of very specific traffic patterns, with e.g. deterministic arrival times. Industry's accepted loss-less limit of 99.999% may be still unacceptably high for DAQ purposes, as e.g. in the case of the LHCb readout system. In addition, even switches passing this criteria under random traffic can show significantly higher loss rates if subject to our traffic pattern, mainly due to buffer memory limitations. We have evaluated the performance of several switches, ranging from "pizza-box" devices with 24 or 48 ports up to chassis based core switches in a test-bed capable to emulate realistic traffic patterns as expected in the readout system of our experiment. The results obtained in our tests have been used to refine and parametrize our packet level simulation of the complete LHCb readout network. In this paper we report on the...

  10. Synchronization, retiming and OTDM of an asynchronous 10 Gigabit Ethernet NRZ packet using a time lens for Terabit Ethernet

    DEFF Research Database (Denmark)

    Hu, Hao; Laguardia Areal, Janaina; Mulvad, Hans Christian Hansen

    2011-01-01

    An asynchronous 10G Ethernet packet is synchronized and retimed to a master clock using a time lens. The NRZ packet is converted into an RZ packet and multiplexed with a serial 1.28 Tb/s signal.......An asynchronous 10G Ethernet packet is synchronized and retimed to a master clock using a time lens. The NRZ packet is converted into an RZ packet and multiplexed with a serial 1.28 Tb/s signal....

  11. Synchronization, retiming and time-division multiplexing of an asynchronous 10 gigabit NRZ Ethernet packet to Terabit Ethernet

    DEFF Research Database (Denmark)

    Hu, Hao; Laguardia Areal, Janaina; Mulvad, Hans Christian Hansen

    2011-01-01

    An asynchronous 10 Gb/s Ethernet packet with maximum packet size of 1518 bytes is synchronized and retimed to a master clock with 200 kHz frequency offset using a time lens. The NRZ packet is simultaneously converted into an RZ packet, then further pulse compressed to a FWHM of 400 fs and finally....../s of the Ethernet packet is achieved. © 2011 Optical Society of America....

  12. Application of UDWDM technology in FTTH networks

    Science.gov (United States)

    Lamperski, Jan; Stepczak, Piotr

    2015-12-01

    In the paper we presented results of investigation of an original ultra dense wavelength division technology based on optical comb generator and its implementation for FTTH networks. The optical comb generator used a ring configuration with an acousto-optic frequency shifter (AOFS) which ensured obtaining very stable optical carrier frequency distances. Properties of an optical comb generator module determined stability of the UDWDM transmitter. Key properties of a selective components based on all fiber Fabry-Perot resonant cavity were presented. Operation of direct and coherent detection DWDM systems were shown. New configurations of FTTH UDWDM architecture have been proposed.

  13. Conference on "Mathematical Technology of Networks"

    CERN Document Server

    2015-01-01

    Bringing together leading researchers in the fields of functional analysis, mathematical physics and graph theory, as well as natural scientists using networks as a tool in their own research fields, such as neuroscience and machine learning, this volume presents recent advances in functional, analytical, probabilistic, and spectral aspects in the study of graphs, quantum graphs, and complex networks. The contributors to this volume explore the interplay between theoretical and applied aspects of discrete and continuous graphs. Their work helps to close the gap between different avenues of research on graphs, including metric graphs and ramified structures. All papers were presented at the conference "Mathematical Technology of Networks," held December 4–7, 2013 at the Zentrum für interdisziplinäre Forschung (ZiF) in Bielefeld, Germany, and are supplemented with detailed figures illustrating both abstract concepts as well as their real-world applications. Dynamical models on graphs or random graphs a...

  14. Trends in Optical Networks

    Indian Academy of Sciences (India)

    Solution for the Gateway site · Case 3: Ethernet Leased Line Services over Existing Infrastructure · Transport for Mobile Voice/Data Networks · Functions needed for mapping Ethernet to SONET/SDH · Relevant Standards · EoS Mapping: without virtual concatenation · EoS Mapping: with virtual concatenation · Slide 21.

  15. Reliability of datagram transmission on Gigabit Ethernet at full link load

    CERN Document Server

    Barczyk, A; Dufey, J P; Galli, D; Jost, B; Marconi, U; Neufeld, N; Peco, G; Vagnoni, V M

    2004-01-01

    The reliability of datagram transmission over Copper Gigabit Ethernet using commodity hardware at sustained Gb/s rate is crucial for the functioning of the software trigger layers of the LHCb experiment. We aim to demonstrate that a nowadays available high-end commodity PC can be employed to achieve the required network performance, in particular to implement a sub-farm controller node. To evaluate all components ranging from the physical medium up to the operating system running on the sub-farm controllers, several issues are addressed, such as transmission error rate, packet drop in switching hardware, protocol handling on reception.

  16. Wireless Fidelity (Wi-Fi) Broadband Network Technology: An ...

    African Journals Online (AJOL)

    ... coverage, while Wi-Fi can be integrated with WiMAX networks to provide Internet connectivity to mobile Wi-Fi users. This paper explores the Wi-Fi broadband wireless network technology, its uses, advantages and disadvantages, comparison with other broadband wireless networks and integration with WiMAX network.

  17. Space-based Networking Technology Developments in the Interplanetary Network Directorate Information Technology Program

    Science.gov (United States)

    Clare, Loren; Clement, B.; Gao, J.; Hutcherson, J.; Jennings, E.

    2006-01-01

    Described recent development of communications protocols, services, and associated tools targeted to reduce risk, reduce cost and increase efficiency of IND infrastructure and supported mission operations. Space-based networking technologies developed were: a) Provide differentiated quality of service (QoS) that will give precedence to traffic that users have selected as having the greatest importance and/or time-criticality; b) Improve the total value of information to users through the use of QoS prioritization techniques; c) Increase operational flexibility and improve command-response turnaround; d) Enable new class of networked and collaborative science missions; e) Simplify applications interfaces to communications services; and f) Reduce risk and cost from a common object model and automated scheduling and communications protocols. Technologies are described in three general areas: communications scheduling, middleware, and protocols. Additionally developed simulation environment, which provides comprehensive, quantitative understanding of the technologies performance within overall, evolving architecture, as well as ability to refine & optimize specific components.

  18. An analysis of communications and networking technologies for the smart grid

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Hernandez, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2013-03-01

    network architecture must be built using standard, open protocols. Internet Protocol (IP) and broadband networks could form the backbone of this infrastructure, as they are flexible and resilient enough to meet the demand of the grid. The benefits of using IP-based networks include the maturity of a large number of IP standards, the availability of tools and applications that can be applied to multiple smart grid areas, and the widespread use of IP technologies in both private and public networks. In addition, IP technologies are the link between applications and the underlying communication physical medium. They allow applications to be developed independent of both the communications infrastructure and the various communications technologies to be used, either wired or wireless. From a general point of view, the main role of communication and networking technologies is to make the current electrical grid, smart. The Smart Grid will use many types of communications technologies such as public and private, wired and wireless, licensed and unlicensed, and standard and proprietary technologies. There exist a great number of communications and networking technologies that can be used to support smart grid applications, including fiber optics systems, cellular, satellite, trunked radio, WiMAX, power line carrier, broadband over power lines (BPL), and IP, as well as in-home technologies such as Ethernet, Wi-Fi, HomePlug, ZigBee, RF Mesh, etc. In this work, an analysis of the most relevant communications and networking technologies applicable to the Smart Grid is presented. [Spanish] El concepto de red electrica inteligente (REI) ha sido conceptualizado como la integracion de la red electrica (generacion, transmision y distribucion) y la red de comunicaciones, esta ultima es considerada como la tecnologia habilitadora fundamental para el desarrollo e integracion de la futura REI. Las tecnologias modernas de comunicacion, arquitecturas de protocolos y estandares pueden ayudar a

  19. An Overview of Computer Network security and Research Technology

    OpenAIRE

    Rathore, Vandana

    2016-01-01

    The rapid development in the field of computer networks and systems brings both convenience and security threats for users. Security threats include network security and data security. Network security refers to the reliability, confidentiality, integrity and availability of the information in the system. The main objective of network security is to maintain the authenticity, integrity, confidentiality, availability of the network. This paper introduces the details of the technologies used in...

  20. An Ethernet-based Data Acquisition System for the NIFFTE Time Projection Chamber

    Science.gov (United States)

    Wood, L.; Asner, D. M.; Baker, R. G.; Bundgaard, J.; Burgett, E.; Cunningham, M.; Deaven, J.; Duke, D. L.; Greife, U.; Grimes, S.; Heffner, M.; Hill, T.; Isenhower, D.; Klay, J. L.; Kleinrath, V.; Kornilov, N.; Laptev, A. B.; Loveland, W.; Massey, T. N.; Meharchand, R.; Qu, H.; Ruz, J.; Sangiorgio, S.; Seilhan, B.; Snyder, L.; Stave, S.; Tatishvili, G.; Thornton, R. T.; Tovesson, F.; Towell, D.; Towell, R. S.; Watson, S.; Wendt, B.

    2014-05-01

    When fully instrumented, the NIFFTE Time Projection Chamber will consist of nearly 6000 channels, each of which requires a preamplifier, ADC, and digital readout. To minimize channel cost and size, the EtherDAQ data acquisition system utilizes off-the-shelf FPGA and Ethernet fiber technology. This application of commercially-available components made it possible to meet the requirements of the DAQ system with considerably less development cost and time than the a customized ASIC solution, and provides considerable flexibility in the final design. The detailed design and current status of the preamplifier and EtherDAQ boards will be discussed.

  1. Design and value of service oriented technologies for smart business networking

    NARCIS (Netherlands)

    Alt, R.; Smits, M.T.; Beverungen, D.; Tuunanen, T.; Wijnhoven, F.

    2014-01-01

    Business networks that effectively use technologies and outperform competing networks are known as smart business networks. Theory hypothesizes that smart business networking requires a ‘Networked Business Operating System’ (NBOS), a technological architecture consisting of business logic, that

  2. Probabilistic logic modeling of network reliability for hybrid network architectures

    Energy Technology Data Exchange (ETDEWEB)

    Wyss, G.D.; Schriner, H.K.; Gaylor, T.R.

    1996-10-01

    Sandia National Laboratories has found that the reliability and failure modes of current-generation network technologies can be effectively modeled using fault tree-based probabilistic logic modeling (PLM) techniques. We have developed fault tree models that include various hierarchical networking technologies and classes of components interconnected in a wide variety of typical and atypical configurations. In this paper we discuss the types of results that can be obtained from PLMs and why these results are of great practical value to network designers and analysts. After providing some mathematical background, we describe the `plug-and-play` fault tree analysis methodology that we have developed for modeling connectivity and the provision of network services in several current- generation network architectures. Finally, we demonstrate the flexibility of the method by modeling the reliability of a hybrid example network that contains several interconnected ethernet, FDDI, and token ring segments. 11 refs., 3 figs., 1 tab.

  3. 78 FR 75360 - Notice of Issuance of Final Determination Concerning Certain Ethernet Switches

    Science.gov (United States)

    2013-12-11

    ... Ethernet Switches AGENCY: U.S. Customs and Border Protection, Department of Homeland Security. ACTION... Protection (``CBP'') has issued a final determination concerning the country of origin of certain Ethernet... B), CBP issued a final determination concerning the country of origin of Ethernet switches which may...

  4. Mobile Computing and Ubiquitous Networking: Concepts, Technologies and Challenges.

    Science.gov (United States)

    Pierre, Samuel

    2001-01-01

    Analyzes concepts, technologies and challenges related to mobile computing and networking. Defines basic concepts of cellular systems. Describes the evolution of wireless technologies that constitute the foundations of mobile computing and ubiquitous networking. Presents characterization and issues of mobile computing. Analyzes economical and…

  5. Analysis and Comparison on Novel Sensor Network Security Access Technology

    Directory of Open Access Journals (Sweden)

    Ping LIU

    2014-01-01

    Full Text Available The article introduces against technical defects of traditional network access control system, detail NAC, NAP, UAC and TNC four kinds of new network security access technology, and this article analyzes and compares them. Security framework for wireless sensor networks SPINS defines the mechanism and algorithm of complete and effective in confidentiality, point-to-point message authentication, integrity, authentication, broadcast authentication.

  6. Wi-Fi Network Communication Technology Design | Onibere ...

    African Journals Online (AJOL)

    This paper is concerned with chronicling the design issues of Wi -Fi network communication technology taking into consideration constraints and challenges addressed in the evolution of other communications networks, such as wired public switched telephone network (PSTN) for internet connectivity. These constraints ...

  7. Image Restoration Technology Based on Discrete Neural network

    Directory of Open Access Journals (Sweden)

    Zhou Duoying

    2015-01-01

    Full Text Available With the development of computer science and technology, the development of artificial intelligence advances rapidly in the field of image restoration. Based on the MATLAB platform, this paper constructs a kind of image restoration technology of artificial intelligence based on the discrete neural network and feedforward network, and carries out simulation and contrast of the restoration process by the use of the bionic algorithm. Through the application of simulation restoration technology, this paper verifies that the discrete neural network has a good convergence and identification capability in the image restoration technology with a better effect than that of the feedforward network. The restoration technology based on the discrete neural network can provide a reliable mathematical model for this field.

  8. Test of Gb Ethernet with FPGA for HADES upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Gilardi, C. [II. Physikalisches Inst., Giessen Univ. (Germany)

    2007-07-01

    Within the HADES experiment, we are investigating a trigger upgrade in order to run heavier systems (Au + Au). We investigate Gigabit Ethernet transfers with Xilinx Virtex II FPGA on the commercial board Celoxica RC300E. We implement the transfer protocols (UDP, ICMP, ARP) with Handel-C. First results of bandwidth and latency will be presented. (orig.)

  9. Framed bit error rate testing for 100G ethernet equipment

    DEFF Research Database (Denmark)

    Rasmussen, Anders; Ruepp, Sarah Renée; Berger, Michael Stübert

    2010-01-01

    rate. As the need for 100 Gigabit Ethernet equipment rises, so does the need for equipment, which can properly test these systems during development, deployment and use. This paper presents early results from a work-in-progress academia-industry collaboration project and elaborates on the challenges...

  10. Using a Commercial Ethernet PHY Device in a Radiation Environment

    Science.gov (United States)

    Parks, Jeremy; Arani, Michael; Arroyo, Roberto

    2014-01-01

    This work involved placing a commercial Ethernet PHY on its own power boundary, with limited current supply, and providing detection methods to determine when the device is not operating and when it needs either a reset or power-cycle. The device must be radiation-tested and free of destructive latchup errors. The commercial Ethernet PHY's own power boundary must be supplied by a current-limited power regulator that must have an enable (for power cycling), and its maximum power output must not exceed the PHY's input requirements, thus preventing damage to the device. A regulator with configurable output limits and short-circuit protection (such as the RHFL4913, rad hard positive voltage regulator family) is ideal. This will prevent a catastrophic failure due to radiation (such as a short between the commercial device's power and ground) from taking down the board's main power. Logic provided on the board will detect errors in the PHY. An FPGA (field-programmable gate array) with embedded Ethernet MAC (Media Access Control) will work well. The error detection includes monitoring the PHY's interrupt line, and the status of the Ethernet's switched power. When the PHY is determined to be non-functional, the logic device resets the PHY, which will often clear radiation induced errors. If this doesn't work, the logic device power-cycles the FPGA by toggling the regulator's enable input. This should clear almost all radiation induced errors provided the device is not latched up.

  11. Integrated Formal Analysis of Timed-Triggered Ethernet

    Science.gov (United States)

    Dutertre, Bruno; Shankar, Nstarajan; Owre, Sam

    2012-01-01

    We present new results related to the verification of the Timed-Triggered Ethernet (TTE) clock synchronization protocol. This work extends previous verification of TTE based on model checking. We identify a suboptimal design choice in a compression function used in clock synchronization, and propose an improvement. We compare the original design and the improved definition using the SAL model checker.

  12. A Novel Frequency Communication Technology in Power Distribution Communication Network

    OpenAIRE

    Li Ying-Jun

    2017-01-01

    With the expansion of the power terminal access network scale, the main road corridor resources, branch line cable Laying difficulties has become an important factor restricting the construction of the network. In this paper, we focus on the frequency communication technology in power distribution communication network, and design a novel technology in communication mode, error correcting coding and data transfer frame format. We also discuss the influence of voltage phase difference on power...

  13. Application of artificial neural networks (ANNs) in wine technology.

    Science.gov (United States)

    Baykal, Halil; Yildirim, Hatice Kalkan

    2013-01-01

    In recent years, neural networks have turned out as a powerful method for numerous practical applications in a wide variety of disciplines. In more practical terms neural networks are one of nonlinear statistical data modeling tools. They can be used to model complex relationships between inputs and outputs or to find patterns in data. In food technology artificial neural networks (ANNs) are useful for food safety and quality analyses, predicting chemical, functional and sensory properties of various food products during processing and distribution. In wine technology, ANNs have been used for classification and for predicting wine process conditions. This review discusses the basic ANNs technology and its possible applications in wine technology.

  14. Security Technologies for Open Networking Environments (STONE)

    Energy Technology Data Exchange (ETDEWEB)

    Muftic, Sead

    2005-03-31

    Under this project SETECS performed research, created the design, and the initial prototype of three groups of security technologies: (a) middleware security platform, (b) Web services security, and (c) group security system. The results of the project indicate that the three types of security technologies can be used either individually or in combination, which enables effective and rapid deployment of a number of secure applications in open networking environments. The middleware security platform represents a set of object-oriented security components providing various functions to handle basic cryptography, X.509 certificates, S/MIME and PKCS No.7 encapsulation formats, secure communication protocols, and smart cards. The platform has been designed in the form of security engines, including a Registration Engine, Certification Engine, an Authorization Engine, and a Secure Group Applications Engine. By creating a middleware security platform consisting of multiple independent components the following advantages have been achieved - Object-oriented, Modularity, Simplified Development, and testing, Portability, and Simplified extensions. The middleware security platform has been fully designed and a preliminary Java-based prototype has been created for the Microsoft Windows operating system. The Web services security system, designed in the project, consists of technologies and applications that provide authentication (i.e., single sign), authorization, and federation of identities in an open networking environment. The system is based on OASIS SAML and XACML standards for secure Web services. Its topology comprises three major components: Domain Security Server (DSS) is the main building block of the system Secure Application Server (SAS) Secure Client In addition to the SAML and XACML engines, the authorization system consists of two sets of components An Authorization Administration System An Authorization Enforcement System Federation of identities in multi

  15. Survey of Promising Technologies for 5G Networks

    Directory of Open Access Journals (Sweden)

    Nam Tuan Le

    2016-01-01

    Full Text Available As an enhancement of cellular networks, the future-generation 5G network can be considered an ultra-high-speed technology. The proposed 5G network might include all types of advanced dominant technologies to provide remarkable services. Consequently, new architectures and service management schemes for different applications of the emerging technologies need to be recommended to solve issues related to data traffic capacity, high data rate, and reliability for ensuring QoS. Cloud computing, Internet of things (IoT, and software-defined networking (SDN have become some of the core technologies for the 5G network. Cloud-based services provide flexible and efficient solutions for information and communications technology by reducing the cost of investing in and managing information technology infrastructure. In terms of functionality, SDN is a promising architecture that decouples control planes and data planes to support programmability, adaptability, and flexibility in ever-changing network architectures. However, IoT combines cloud computing and SDN to achieve greater productivity for evolving technologies in 5G by facilitating interaction between the physical and human world. The major objective of this study provides a lawless vision on comprehensive works related to enabling technologies for the next generation of mobile systems and networks, mainly focusing on 5G mobile communications.

  16. Organizational Application of Social Networking Information Technologies

    Science.gov (United States)

    Reppert, Jeffrey R.

    2012-01-01

    The focus of this qualitative research study using the Delphi method is to provide a framework for leaders to develop their own social networks. By exploring concerns in four areas, leaders may be able to better plan, implement, and manage social networking systems in organizations. The areas addressed are: (a) social networking using…

  17. Development of a nationwide network for technology transfer

    Science.gov (United States)

    Fong, Louis B. C.; Brockman, Paul R.

    1987-01-01

    The winter and spring of 1987 saw the cooperative nationwide network for technology transfer translated from concept to reality. The most obvious of the network relationships which were developed or which are anticipated are summarized. The objective was to help assure that every U.S. business which has the capacity to exploit, or the need to obtain new technology in any form, has access to the technology it needs or can use.

  18. Application of wireless sensor network technology in logistics information system

    Science.gov (United States)

    Xu, Tao; Gong, Lina; Zhang, Wei; Li, Xuhong; Wang, Xia; Pan, Wenwen

    2017-04-01

    This paper introduces the basic concepts of active RFID (WSN-ARFID) based on wireless sensor networks and analyzes the shortcomings of the existing RFID-based logistics monitoring system. Integrated wireless sensor network technology and the scrambling point of RFID technology. A new real-time logistics detection system based on WSN and RFID, a model of logistics system based on WSN-ARFID is proposed, and the feasibility of this technology applied to logistics field is analyzed.

  19. Job-related social networks and communication technology.

    Science.gov (United States)

    Nelson Bryen, Diane; Potts, Blyden B; Carey, Allison C

    2006-03-01

    In order to examine the social networks of individuals who rely on AAC, 38 adults who used AAC provided information about how they developed and maintained job-related social networks and how communication technologies helped them to do so. The respondents met new people who might become part of their job-related networks during social events with family or friends, as well as at meetings, conferences, and workshops. They also frequently used generic communication technologies such as the phone, email, computer, and the Internet to maintain contact with people in their social networks. Findings suggest that land-line telephones, email, and the Internet were used by the largest percentage of respondents, with email and the Internet used most frequently to contact the largest number of people. Qualitative data provided information about the use of technology for enhancing participants' job-related networks and suggestions for new or improved technologies.

  20. wither scientific and technological information network in tanzania

    African Journals Online (AJOL)

    This article sets out to make an analysis of Tanzania's efforts at establishing a network for scientific and technological information. The paper discusses the Tanzania National System for Science and Technology (TANISSAT) under the Tanzania Commission for Science and Technology (COSTECH). TANISSAT which began ...

  1. ShareSync: A Solution for Deterministic Data Sharing over Ethernet

    Science.gov (United States)

    Dunn, Daniel J., II; Koons, William A.; Kennedy, Richard D.; Davis, Philip A.

    2007-01-01

    As part of upgrading the Contact Dynamics Simulation Laboratory (CDSL) at the NASA Marshall Space Flight Center (MSFC), a simple, cost effective method was needed to communicate data among the networked simulation machines and I/O controllers used to run the facility. To fill this need and similar applicable situations, a generic protocol was developed, called ShareSync. ShareSync is a lightweight, real-time, publish-subscribe Ethernet protocol for simple and deterministic data sharing across diverse machines and operating systems. ShareSync provides a simple Application Programming Interface (API) for simulation programmers to incorporate into their code. The protocol is compatible with virtually all Ethernet-capable machines, is flexible enough to support a variety of applications, is fast enough to provide soft real-time determinism, and is a low-cost resource for distributed simulation development, deployment, and maintenance. The first design cycle iteration of ShareSync has been completed, and the protocol has undergone several testing procedures including endurance and benchmarking tests and approaches the 2001ts data synchronization design goal for the CDSL.

  2. Control and Monitoring of a Stepper Motor through a Local Area Network

    Directory of Open Access Journals (Sweden)

    POPOVICI, D.

    2007-11-01

    Full Text Available In these days due to the information technology there are many ways to control a remote servomotor. In the paper it is shown a simple and reliable way to handle the control and monitoring of a remote stepper motor using a Local Area Network (LAN. The hardware uses a common PIC microcontroller and a stand-alone Ethernet controller. The main program located in the flash program memory solves the following tasks: read packs through SPI (Serial Peripheral Interface from the Ethernet controller's buffer and decode them, encapsulate data to be sent with the Ethernet controller, control the on-off state of the transistors from the static converter and receive feedback directly from the optical sensor to monitor the actual position of the shaft. The microcontroller supervises also the Ethernet controller. The Ethernet controller's job is to receive data from the main application remote program that runs on a computer, via UTP cable. Then it stores the data for a short time in a buffer from which the microcontroller can read it. The microcontroller stores data on this Ethernet controller too and can command it to send data to the main application program running remotely. The main remote program is written in Visual C++ and has a friendly interface allowing to the operator to send commands to the stepper motor drive and monitor in a dedicated window position, speed or the control sequences for the power transistor drivers of the stepper motor. The operator can send specific commands to the drive such as Start, Stop, Accelerate, Decelerate, Spin Clockwise/Counter clockwise and the number of steps. The microcontroller stepper motor drive system shows good performance and reliability.

  3. Resilient Disaster Network Based on Software Defined Cognitive Wireless Network Technology

    Directory of Open Access Journals (Sweden)

    Goshi Sato

    2015-01-01

    Full Text Available In order to temporally recover the information network infrastructure in disaster areas from the Great East Japan Earthquake in 2011, various wireless network technologies such as satellite IP network, 3G, and Wi-Fi were effectively used. However, since those wireless networks are individually introduced and installed but not totally integrated, some of networks were congested due to the sudden network traffic generation and unbalanced traffic distribution, and eventually the total network could not effectively function. In this paper, we propose a disaster resilient network which integrates various wireless networks into a cognitive wireless network that users can use as an access network to the Internet at the serious disaster occurrence. We designed and developed the disaster resilient network based on software defined network (SDN technology to automatically select the best network link and route among the possible access networks to the Internet by periodically monitoring their network states and evaluate those using extended AHP method. In order to verify the usefulness of our proposed system, a prototype system is constructed and its performance is evaluated.

  4. Creation of a European network dedicated to technology transfer

    CERN Multimedia

    2008-01-01

    The CERN Council recently approved the creation of a technology transfer network, whose aim will be to improve European industry’s access to the technologies developed by the particle physics community in the Member States. The gas detectors for the TOTEM experiment (GEM) offer potential for fruitful collaboration within the framework of the TT network. Many other technologies are going down the same road.The desire to set up a technology transfer network follows on from the European Strategy for Particle Physics, approved by the CERN Council on 14 July 2006 in Lisbon. In this context, special emphasis was laid on European industry’s participation in the implementation of particle physics programmes and, in particular, its access to the new technologies developed by the scientific community. It was recognised that effort needs to be put into improving the efficiency of technology transfer...

  5. Research on key technology of space laser communication network

    Science.gov (United States)

    Chang, Chengwu; Huang, Huiming; Liu, Hongyang; Gao, Shenghua; Cheng, Liyu

    2016-10-01

    Since the 21st century, Spatial laser communication has made a breakthrough development. Europe, the United States, Japan and other space powers have carried out the test of spatial laser communication technology on-orbit, and put forward a series of plans. In 2011, China made the first technology demonstration of satellite-ground laser communication carried by HY-2 satellite. Nowadays, in order to improve the transmission rate of spatial network, the topic of spatial laser communication network is becoming a research hotspot at home and abroad. This thesis, from the basic problem of spatial laser communication network to solve, analyzes the main difference between spatial network and ground network, which draws forth the key technology of spatial laser communication backbone network, and systematically introduces our research on aggregation, addressing, architecture of spatial network. From the perspective of technology development status and trends, the thesis proposes the development route of spatial laser communication network in stages. So as to provide reference about the development of spatial laser communication network in China.

  6. Artificial Neural Networks and Instructional Technology.

    Science.gov (United States)

    Carlson, Patricia A.

    1991-01-01

    Artificial neural networks (ANN), part of artificial intelligence, are discussed. Such networks are fed sample cases (training sets), learn how to recognize patterns in the sample data, and use this experience in handling new cases. Two cognitive roles for ANNs (intelligent filters and spreading, associative memories) are examined. Prototypes…

  7. WiMAX technology and network evolution

    CERN Document Server

    Etemad, Kamran

    2010-01-01

    WiMAX, the Worldwide Interoperability for Microwave Access, represents a paradigm shift in telecommunications technology. It offers the promise of cheaper, smaller, and simpler technology compared to existing broadband options such as DSL, cable, fiber, and 3G wireless.

  8. Managing computer networks using peer-to-peer technologies

    OpenAIRE

    Granville, Lisandro Zambenedetti; Rosa, Diego Moreira da; Panisson, André; Melchiors, Cristina; Almeida, Maria Janilce Bosquiroli; Tarouco,Liane Margarida Rockenbach

    2005-01-01

    Peer-to-peer systems and network management are usually related to each other because the traffic loads of P2P systems have to be controlled to avoid regular network services becoming unavailable due to network congestion. In this context, from a network operation point of view, P2P systems often mean problems. In this article we take a different perspective and look at P2P technologies as an alternative to improve current network management solutions. We introduce an approach where P2P netwo...

  9. Impact of green technologies in optical networks case study: green wireless optical broadband access network

    Science.gov (United States)

    Puche, William S.; Sierra, Javier E.

    2014-09-01

    This article analyzes the current state of green technologies in optical telecommunications networks, analyzing in detail the basic structure of a hybrid network (Optical-Wireless), taking into account energy consumption by proposing a mathematical model is presented to establish the optimum number of ONUs in a network.

  10. FY 2004 Technology Transfer Network and Affiliations

    Science.gov (United States)

    2004-01-01

    The NASA Innovative Partnerships Program sponsors a number of organizations around the country that are designed to assist U.S. businesses in accessing, utilizing, and commercializing NASA-funded research and technology. These organizations work closely with the Technology Transfer Offices, located at each of the 10 NASA field centers, providing a full range of technology transfer and commercialization services and assistance.

  11. Telecommunications technology development for the Deep Space Network

    Science.gov (United States)

    Yuen, J. H.; Resch, G. M.; Stelzried, C. T.

    1989-01-01

    The telecommunications technology that is currently being developed for the Deep Space Network (DSN), a system providing communications and navigation support for NASA's deep space missions, is discussed. The major areas of development include Ka-band (32 GHz) technology, beam waveguide antennas, low-noise amplifiers, coding, navigation techniques, high-power transmitters, and optical technology. The expected payoffs of the new technology during the mid-1990's and later are examined.

  12. Cyber-physical system design with sensor networking technologies

    CERN Document Server

    Zeadally, Sherali

    2016-01-01

    This book describes how wireless sensor networking technologies can help in establishing and maintaining seamless communications between the physical and cyber systems to enable efficient, secure, reliable acquisition, management, and routing of data.

  13. A Survey of 5G Network: Architecture and Emerging Technologies

    National Research Council Canada - National Science Library

    Gupta, A; Jha, R. K

    2015-01-01

    .... This paper presents the results of a detailed survey on the fifth generation (5G) cellular network architecture and some of the key emerging technologies that are helpful in improving the architecture and meeting the demands of users...

  14. Green Networking for Major Components of Information Communication Technology Systems

    Directory of Open Access Journals (Sweden)

    Zeadally Sherali

    2009-01-01

    Full Text Available Abstract Green Networking can be the way to help reduce carbon emissions by the Information and Communications Technology (ICT Industry. This paper presents some of the major components of Green Networking and discusses how the carbon footprint of these components can be reduced.

  15. Cognitive Heterogeneous Reconfigurable Optical Networks (CHRON): Enabling Technologies and Techniques

    DEFF Research Database (Denmark)

    Tafur Monroy, Idelfonso; Zibar, Darko; Guerrero Gonzalez, Neil

    2011-01-01

    We present the approach of cognition applied to heterogeneous optical networks developed in the framework of the EU project CHRON: Cognitive Heterogeneous Reconfigurable Optical Network. We introduce and discuss in particular the technologies and techniques that will enable a cognitive optical...

  16. Radiation-Hard SpaceWire/Gigabit Ethernet-Compatible Transponder

    Science.gov (United States)

    Katzman, Vladimir

    2012-01-01

    A radiation-hard transponder was developed utilizing submicron/nanotechnology from IBM. The device consumes low power and has a low fabrication cost. This device utilizes a Plug-and-Play concept, and can be integrated into intra-satellite networks, supporting SpaceWire and Gigabit Ethernet I/O. A space-qualified, 100-pin package also was developed, allowing space-qualified (class K) transponders to be delivered within a six-month time frame. The novel, optical, radiation-tolerant transponder was implemented as a standalone board, containing the transponder ASIC (application specific integrated circuit) and optical module, with an FPGA (field-programmable gate array) friendly parallel interface. It features improved radiation tolerance; high-data-rate, low-power consumption; and advanced functionality. The transponder utilizes a patented current mode logic library of radiation-hardened-by-architecture cells. The transponder was developed, fabricated, and radhard tested up to 1 MRad. It was fabricated using 90-nm CMOS (complementary metal oxide semiconductor) 9 SF process from IBM, and incorporates full BIT circuitry, allowing a loop back test. The low-speed parallel LVCMOS (lowvoltage complementary metal oxide semiconductor) bus is compatible with Actel FPGA. The output LVDS (low-voltage differential signaling) interface operates up to 1.5 Gb/s. Built-in CDR (clock-data recovery) circuitry provides robust synchronization and incorporates two alarm signals such as synch loss and signal loss. The ultra-linear peak detector scheme allows on-line control of the amplitude of the input signal. Power consumption is less than 300 mW. The developed transponder with a 1.25 Gb/s serial data rate incorporates a 10-to-1 serializer with an internal clock multiplication unit and a 10-1 deserializer with internal clock and data recovery block, which can operate with 8B10B encoded signals. Three loop-back test modes are provided to facilitate the built-in-test functionality. The

  17. Knowledge network for medical technology management in Mexico.

    Science.gov (United States)

    Licona, Fabiola Martínez; Leehan, Joaquín Azpiroz; Méndez, Miguel Cadena; Yuriar, Salvador Duarte; Salazar, Raúl Molina; Gilmore, Amador Terán

    2009-10-01

    The role of biomedical engineers (BMEs) has changed widely over the years, from managing a group of technicians to the planning of large installations and the management of medical technology countrywide. As the technology has advanced, the competence of BMEs has been challenged because it is no longer possible to be an expert in every component of the technology involved in running a hospital. Our approach has been to form a network of professionals that are experts in different fields related to medical technology, where work is coordinated to provide high quality services at the planning and execution stages of projects related to medical technology. A study of the procedures involved in the procurement of medical technology has been carried out over the years. These experiences have been compared with several case studies where the approach to problem solving in this area has been multidisciplinary. Planning and execution phases of projects involving medical technology management have been identified. After several instances of collaboration among experts from different fields, a network for management of healthcare technology has been formed at our institution that incorporates the experience from different departments that were dealing separately with projects involving medical technology. This network has led us to propose this approach to solve medical technology management projects, where the strengths of each subgroup complement each other. This structure will lead to a more integrated approach to healthcare technology management and will ensure higher quality solutions.

  18. Systems and technologies for high-speed inter-office/datacenter interface

    Science.gov (United States)

    Sone, Y.; Nishizawa, H.; Yamamoto, S.; Fukutoku, M.; Yoshimatsu, T.

    2017-01-01

    Emerging requirements for inter-office/inter-datacenter short reach links for data center interconnects (DCI) and metro transport networks have led to various inter-office and inter-datacenter optical interface technologies. These technologies are bringing significant changes to systems and network architectures. In this paper, we present a system and ZR optical interface technologies for DCI and metro transport networks, then introduce the latest challenges facing the system framework. There are two trends in reach extension; one is to use Ethernet and the other is to use digital coherent technologies. The first approach achieves reach extension while using as many existing Ethernet components as possible. It offers low costs as reuses the cost-effective components created for the large Ethernet market. The second approach adopts low-cost and low power coherent DSPs that implement the minimal set long haul transmission functions. This paper introduces an architecture that integrates both trends. The architecture satisfies both datacom and telecom needs with a common control and management interface and automated configuration.

  19. US long distance fiber optic networks: Technology, evolution and advanced concepts. Volume 2: Fiber optic technology and long distance networks

    Science.gov (United States)

    1986-01-01

    The study projects until 2000 the evolution of long distance fiber optic networks in the U.S. Volume 1 is the Executive Summary. Volume 2 focuses on fiber optic components and systems that are directly related to the operation of long-haul networks. Optimistic, pessimistic and most likely scenarios of technology development are presented. The activities of national and regional companies implementing fiber long haul networks are also highlighted, along with an analysis of the market and regulatory forces affecting network evolution. Volume 3 presents advanced fiber optic network concept definitions. Inter-LATA traffic is quantified and forms the basis for the construction of 11-, 15-, 17-, and 23-node networks. Using the technology projections from Volume 2, a financial model identifies cost drivers and determines circuit mile costs between any two LATAs. A comparison of fiber optics with alternative transmission concludes the report.

  20. Sustainable coastal sensor networks: technologies and challenges

    Science.gov (United States)

    Carapezza, Edward M.; Butman, Jerry; Babb, Ivar; Bucklin, Ann

    2008-04-01

    This paper describes a distributed sensor network for a coastal maritime security system. This concept incorporates a network of small passive and active multi-phenomenological unattended sensors and shore based optical sensors to detect, classify, and track submerged threat objects approaching high value coastal assets, such as ports, harbors, residential, commercial, and military facilities and areas. The network of unattended, in-water sensors perform the initial detection, classification, and coarse tracking and then queues shore based optical laser radar sensors. These shore-based sensors perform a queued sector search to develop a refined track on the submerged threat objects that were initially detected by the unattended sensor network. Potential threat objects include swimmers, small unmanned underwater vehicles (UUV's), small submarines, and submerged barges. All of these threats have the potential to transport threat objects such as explosives, chemical, biological, radiological, and nuclear materials. Reliable systems with low false alarm rates (FAR) are proposed. Tens to hundreds of low cost passive sensors are proposed to be deployed conjunctively with several active acoustic and optical sensors in threat and facility dependant patterns to maximize the detection, tracking and classification of submerged threat objects. The integrated command and control system and novel microbial fuel cells to power these sensor networks are also described.

  1. Perspectives on next-generation technology for environmental sensor networks

    Science.gov (United States)

    Barbara J. Benson; Barbara J. Bond; Michael P. Hamilton; Russell K. Monson; Richard. Han

    2009-01-01

    Sensor networks promise to transform and expand environmental science. However, many technological difficulties must be overcome to achieve this potential. Partnerships of ecologists with computer scientists and engineers are critical in meeting these challenges. Technological issues include promoting innovation in new sensor design, incorporating power optimization...

  2. Digital video technologies and their network requirements

    Energy Technology Data Exchange (ETDEWEB)

    R. P. Tsang; H. Y. Chen; J. M. Brandt; J. A. Hutchins

    1999-11-01

    Coded digital video signals are considered to be one of the most difficult data types to transport due to their real-time requirements and high bit rate variability. In this study, the authors discuss the coding mechanisms incorporated by the major compression standards bodies, i.e., JPEG and MPEG, as well as more advanced coding mechanisms such as wavelet and fractal techniques. The relationship between the applications which use these coding schemes and their network requirements are the major focus of this study. Specifically, the authors relate network latency, channel transmission reliability, random access speed, buffering and network bandwidth with the various coding techniques as a function of the applications which use them. Such applications include High-Definition Television, Video Conferencing, Computer-Supported Collaborative Work (CSCW), and Medical Imaging.

  3. Gigabit network technology. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Davenport, C.M.C. [ed.

    1996-10-01

    Current digital networks are evolving toward distributed multimedia with a wide variety of applications with individual data rates ranging from kb/sec to tens and hundreds of Mb/sec. Link speed requirements are pushing into the Gb/sec range and beyond the envelop of electronic networking capabilities. There is a vast amount of untapped bandwidth available in the low-attenuation communication bands of an optical fiber. The capacity in one fiber thread is enough to carry more than two thousand times as much information as all the current radio and microwave frequencies. And while fiber optics has replaced copper wire as the transmission medium of choice, the communication capacity of conventional fiber optic networks is ultimately limited by electronic processing speeds.

  4. Enabling Technologies for Cognitive Optical Networks

    DEFF Research Database (Denmark)

    Borkowski, Robert

    : the first experimental demonstration of the use of case-based reasoning technique in optical communication network for successful quality of transmission estimation in an optical link; cognitively controlled erbium-doped fiber amplifiers to ensure below forward error correction limit performance of all...... transmitted channels; reconfigurable coherent software-defined receiver supporting various modulation formats and bit rates; experimental evaluation of required optical signal-to-noise ratio for flexible elastic optical networks with mixed modulation formats; evaluation of various prefilter shapes for high...... symbol rate software-defined transmitters. Furthermore, by using the DSP capabilities of a coherent software-defined receiver combined with powerful machine learning methods, optical performance monitoring techniques for next generation networks were conceived, implemented, and tested by numerical...

  5. Evaluation of the Delivery QoS Characteristics of Gigabit Ethernet Switches

    CERN Document Server

    Beuran, Razvan; Davies, Neil; Dobinson, Robert W

    2004-01-01

    The event selection system for ATLAS is designed to perform real-time image processing on particle collision data equivalent to 2 TB/s. This data is filtered by a multi-level architecture, resulting in 200 GB/s of data analysed by a distributed system consisting of several thousand PCs and switches. As part of our ongoing work on this system, we performed tests on several Gigabit Ethernet switches manufactured by market leaders, using our custom-built test equipment. We analysed the implications of running network devices at, and just beyond, saturation while deploying service differentiation mechanisms. We quantified the quality degradation that traffic flows experienced when passing through switches. We focused on emergent properties in saturation, including fairness and fidelity to expectations. We discuss the ideals for switch behaviour and compare them against the observed behaviour of real implementations of differentiation mechanisms in switches. This creates a generic benchmark, which is independent o...

  6. Ethernet-based mobility architecture for 5G

    DEFF Research Database (Denmark)

    Cattoni, Andrea Fabio; Mogensen, Preben; Vesterinen, Seppo

    2014-01-01

    A massive traffic increase is foreseen in the near future in mobile networks. Such data storm is expected to pose new challenging requirements to the existing mobile network architecture, since the traffic will be generated by a wide set of applications running on an increasingly high number...... network. In particular, in this paper we focus on the mobility aspects within such new architecture, proposing low latency Layer 2 solutions for the Access Network, while exploiting aggregating Layer 3 mobility functionalities in the regional and national clouds....... of mobile devices and sensors. In this paper we propose a paradigm shift for the evolved Packet Core for the future 5G system. By leveraging on the economy of scale of software–based ICT technologies, namely Software Defined Networking and cloud computing, we propose a hierarchically cloudified mobile...

  7. Channel Bonding in Linux Ethernet Environment using Regular Switching Hub

    Directory of Open Access Journals (Sweden)

    Chih-wen Hsueh

    2004-06-01

    Full Text Available Bandwidth plays an important role for quality of service in most network systems. There are many technologies developed to increase host bandwidth in a LAN environment. Most of them need special hardware support, such as switching hub that supports IEEE Link Aggregation standard. In this paper, we propose a Linux solution to increase the bandwidth between hosts with multiple network adapters connected to a regular switching hub. The approach is implemented as two Linux kernel modules in a LAN environment without modification to the hardware and operating systems on host machines. Packets are dispatched to bonding network adapters for transmission. The proposed approach is backward compatible, flexible and transparent to users and only one IP address is needed for multiple bonding network adapters. Evaluation experiments in TCP and UDP transmission are shown with bandwidth gain proportionally to the number of network adapters. It is suitable for large-scale LAN systems with high bandwidth requirement, such as clustering systems.

  8. Advanced Medical Technology and Network Systems Research.

    Science.gov (United States)

    1999-09-01

    acceptance and operations of comprehensive radiology networks. Is the PACS cup half full or half empty? SPIE Proc. 1093:194-201 23. Deleted in proof...repeat examination in one to two menstrual cysts approximately 1-2 weeks after menstrual period." Similar recommendations are given for women over

  9. A Network Analysis Model for Selecting Sustainable Technology

    Directory of Open Access Journals (Sweden)

    Sangsung Park

    2015-09-01

    Full Text Available Most companies develop technologies to improve their competitiveness in the marketplace. Typically, they then patent these technologies around the world in order to protect their intellectual property. Other companies may use patented technologies to develop new products, but must pay royalties to the patent holders or owners. Should they fail to do so, this can result in legal disputes in the form of patent infringement actions between companies. To avoid such situations, companies attempt to research and develop necessary technologies before their competitors do so. An important part of this process is analyzing existing patent documents in order to identify emerging technologies. In such analyses, extracting sustainable technology from patent data is important, because sustainable technology drives technological competition among companies and, thus, the development of new technologies. In addition, selecting sustainable technologies makes it possible to plan their R&D (research and development efficiently. In this study, we propose a network model that can be used to select the sustainable technology from patent documents, based on the centrality and degree of a social network analysis. To verify the performance of the proposed model, we carry out a case study using actual patent data from patent databases.

  10. Technology Developments Integrating a Space Network Communications Testbed

    Science.gov (United States)

    Kwong, Winston; Jennings, Esther; Clare, Loren; Leang, Dee

    2006-01-01

    As future manned and robotic space explorations missions involve more complex systems, it is essential to verify, validate, and optimize such systems through simulation and emulation in a low cost testbed environment. The goal of such a testbed is to perform detailed testing of advanced space and ground communications networks, technologies, and client applications that are essential for future space exploration missions. We describe the development of new technologies enhancing our Multi-mission Advanced Communications Hybrid Environment for Test and Evaluation (MACHETE) that enable its integration in a distributed space communications testbed. MACHETE combines orbital modeling, link analysis, and protocol and service modeling to quantify system performance based on comprehensive considerations of different aspects of space missions. It can simulate entire networks and can interface with external (testbed) systems. The key technology developments enabling the integration of MACHETE into a distributed testbed are the Monitor and Control module and the QualNet IP Network Emulator module. Specifically, the Monitor and Control module establishes a standard interface mechanism to centralize the management of each testbed component. The QualNet IP Network Emulator module allows externally generated network traffic to be passed through MACHETE to experience simulated network behaviors such as propagation delay, data loss, orbital effects and other communications characteristics, including entire network behaviors. We report a successful integration of MACHETE with a space communication testbed modeling a lunar exploration scenario. This document is the viewgraph slides of the presentation.

  11. Networks dynamics in the case of emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Rotolo, D

    2016-07-01

    This research in progress aims at increasing our understanding of how collaborative networks form, evolve and are configured in the case of emerging technologies. The architecture of the relationships among the variety of organisational actors involved in the emergence process exerts a significant influence in shaping technological change in certain directions rather than others, especially in the early stage of emergence. As a result, socially optimal or desirable technological trajectories may be ‘opportunistically’ rejected. Our empirical analysis is based on a case-study of an emerging medical technology, namely ‘microneedles’. On the basis of co-authorship data reported in 1,943 publications on the topic from 1990 to 2014, longitudinal collaboration (co-authorship) networks were built at two levels: affiliation and author. We examined the dynamics of co-authorship networks by building on recent methodological advancements in network analysis, i.e. Exponential Random Graph Models (ERGMs). These models enable us to make statistical inferences about on the extent to which a network configuration occurs more than could be expected by chance and to identify which social mechanisms may be shaping the network in certain configurations. The findings of the statistical analyses (currently in progress) combined with the qualitative understanding of the case will increase our understanding of which mechanisms are more likely to drive the network dynamics in the case of emerging technologies. These include evidence of the extent to which the likelihood of forming, maintaining, or terminating ties among actors (authors or affiliations) is affected by actors’ covariates such as types of organisations, diversity/specialisation of the research undertaken, and status. These findings have potential to provide important inputs for policymaking process in the case of emerging technologies. (Author)

  12. 75 FR 57521 - Networking and Information Technology Research and Development (NITRD) Program: Draft NITRD 2010...

    Science.gov (United States)

    2010-09-21

    ... FOUNDATION Networking and Information Technology Research and Development (NITRD) Program: Draft NITRD 2010 Strategic Plan--URL Correction AGENCY: The National Coordination Office (NCO) for Networking and Information... Coordination Office for Networking and Information Technology Research and Development (NITRD) requests...

  13. Towards the systematic development of medical networking technology.

    Science.gov (United States)

    Faust, Oliver; Shetty, Ravindra; Sree, S Vinitha; Acharya, Sripathi; Acharya U, Rajendra; Ng, E Y K; Poo, Chua Kok; Suri, Jasjit

    2011-12-01

    Currently, there is a disparity in the availability of doctors between urban and rural areas of developing countries. Most experienced doctors and specialists, as well as advanced diagnostic technologies, are available in urban areas. People living in rural areas have less or sometimes even no access to affordable healthcare facilities. Increasing the number of doctors and charitable medical hospitals or deploying advanced medical technologies in these areas might not be economically feasible, especially in developing countries. We need to mobilize science and technology to master this complex, large scale problem in an objective, logical, and professional way. This can only be achieved with a collaborative effort where a team of experts works on both technical and non-technical aspects of this health care divide. In this paper we use a systems engineering framework to discuss hospital networks which might be solution for the problem. We argue that with the advancement in communication and networking technologies, economically middle class people and even some rural poor have access to internet and mobile communication systems. Thus, Hospital Digital Networking Technologies (HDNT), such as telemedicine, can be developed to utilize internet, mobile and satellite communication systems to connect primitive rural healthcare centers to well advanced modern urban setups and thereby provide better consultation and diagnostic care to the needy people. This paper describes requirements and limitations of the HDNTs. It also presents the features of telemedicine, the implementation issues and the application of wireless technologies in the field of medical networking.

  14. Survey of current technologies for network security; Network security gijutsu no genjo

    Energy Technology Data Exchange (ETDEWEB)

    Matsui, S.

    2000-05-01

    The Internet and technologies derived from it are indispensable for business today. As the Internet have became a commodity, and number of cracking activities have grown rapidly, network security has become serious matter. This paper presents a survey of current technologies for network security. First a summary of current research trend in cryptography, IPSec, intrusion detection system, next generation firewall, and performance management. Then detailed description on intrusion detection system and next generation firewall will be given. (author)

  15. Technology Licensing Strategy for Network Product in a Service Industry

    Directory of Open Access Journals (Sweden)

    Xianpei Hong

    2015-01-01

    Full Text Available Technology licensing has gained significant attention in literature and practice as a rapid and effective way to improve firm’s capability of technology innovation. In this paper, we investigate a duopolistic service provider competition market, where service providers develop and sell a kind of network product. In this setting, we analyze the innovating service provider’s four licensing strategies: no licensing, fixed fee licensing, royalty licensing, and two-part tariff licensing. The literature suggests that when the network products can be completely substituted, two-part tariff licensing is the optimal strategy of the innovating service provider. We find that when the network products cannot be completely substituted, two-part tariff licensing is not always optimal. The degree of the product differentiation, the intensity of the network effects, and the R&D cost of the potential licensee play a key role in determining the innovating service provider’s optimal licensing strategies.

  16. Developing intelligent sensor networks —a technological convergence approach

    OpenAIRE

    Vassev, Emil; Hinchey, Mike; Nixon, Paddy

    2010-01-01

    peer-reviewed We present a technological convergence approach to developing sensor networks capable of self-management. We use ASSL (Autonomic System Specification Language) to formally develop autonomous intelligent sensor nodes and DMF (Demand Migration Framework) to connect these nodes in a sensor network. ASSL provides constructs for modeling special self-management policies that drive the sensor nodes’ behavior and control the communication mechanism provided by DMF.

  17. Nonlinear Optical Signal Processing for Tbit/s Ethernet Applications

    DEFF Research Database (Denmark)

    Oxenløwe, Leif Katsuo; Galili, Michael; Mulvad, Hans Christian Hansen

    2012-01-01

    detection in a delay-interferometer-balanced detector-based receiver, yielding a BER less than 10−9. We also present subsystems making serial optical Tbit/s systems compatible with standard Ethernet data for data centre applications and present Tbit/s results using, for instance silicon nanowires.......We review recent experimental demonstrations of Tbaud optical signal processing. In particular, we describe a successful 1.28 Tbit/s serial data generation based on single polarization 1.28 Tbaud symbol rate pulses with binary data modulation (OOK) and subsequent all-optical demultiplexing. We also...

  18. Cognitive wireless networks using the CSS technology

    CERN Document Server

    Li, Meiling; Pan, Jeng-Shyang

    2016-01-01

    The aim of this book is to provide some useful methods to improve the spectrum sensing performance in a systematic way, and point out an effective method for the application of cognitive radio technology in wireless communications. The book gives a state-of-the-art survey and proposes some new cooperative spectrum sensing (CSS) methods attempting to achieve better performance. For each CSS, the main idea and corresponding algorithm design are elaborated in detail. This book covers the fundamental concepts and the core technologies of CSS, especially its latest developments. Each chapter is presented in a self-sufficient and independent way so that the reader can select the chapters interesting to them. The methodologies are described in detail so that the readers can repeat the corresponding experiments easily. It will be a useful book for researchers helping them to understand the classifications of CSS, inspiring new ideas about the novel CSS technology for CR, and learning new ideas from the current status...

  19. Router Agent Technology for Policy-Based Network Management

    Science.gov (United States)

    Chow, Edward T.; Sudhir, Gurusham; Chang, Hsin-Ping; James, Mark; Liu, Yih-Chiao J.; Chiang, Winston

    2011-01-01

    This innovation can be run as a standalone network application on any computer in a networked environment. This design can be configured to control one or more routers (one instance per router), and can also be configured to listen to a policy server over the network to receive new policies based on the policy- based network management technology. The Router Agent Technology transforms the received policies into suitable Access Control List syntax for the routers it is configured to control. It commits the newly generated access control lists to the routers and provides feedback regarding any errors that were faced. The innovation also automatically generates a time-stamped log file regarding all updates to the router it is configured to control. This technology, once installed on a local network computer and started, is autonomous because it has the capability to keep listening to new policies from the policy server, transforming those policies to router-compliant access lists, and committing those access lists to a specified interface on the specified router on the network with any error feedback regarding commitment process. The stand-alone application is named RouterAgent and is currently realized as a fully functional (version 1) implementation for the Windows operating system and for CISCO routers.

  20. Bridging the Gap from Networking Technologies to Applications: Workshop Report

    Science.gov (United States)

    Johnson, Marjory J.; desJardins, Richard

    2000-01-01

    The objective of the Next Generation Internet (NGI) Federal program is threefold, encompassing development of networking technologies, high-performance network testbeds, and revolutionary applications. There have been notable advances in emerging network technologies and several nationwide testbeds have been established, but the integration of emerging technologies into applications is lagging. To help bridge this gap between developers of NGI networking technologies and developers of NGI applications, the NASA Research and Education Network (NREN) project hosted a two-day workshop at NASA Ames Research Center in August 1999. This paper presents a summary of the results of this workshop and also describes some of the challenges NREN is facing while incorporating new technologies into HPCC and other NASA applications. The workshop focused on three technologies - Quality of Service (QoS), advanced multicast, and security-and five major NGI application areas - telemedicine, digital earth, digital video, distributed data-intensive applications, and computational infrastructure applications. Network technology experts, application developers, and NGI testbed representatives came together at the workshop to promote cross-fertilization between the groups. Presentations on the first day, including an overview of the three technologies, application case studies and testbed status reports, laid the foundation for discussions on the second day. The objective of these latter discussions, held within smaller breakout groups, was to establish a coherent picture of the current status of the various pieces of each of the three technologies, to create a roadmap outlining future technology development, and to offer technological guidance to application developers. In this paper we first present a brief overview of the NGI applications that were represented at the workshop, focusing on the identification of technological advances that have successfully been incorporated in each

  1. Hybrid Fiber Radio Networks: New concepts and technologies

    OpenAIRE

    Torres Román, Rosa C.

    2010-01-01

    To study the main trends which drive the merging of fiber and wireless technologies in access networks. As the hybrid radio networks constitute a new and emerging field of knowledge it is difficult to get a clear picture of their main building blocks and basic technologies and concepts. Due to the lack of reference texts with a basic entry level, in this PFC we aim at carrying out a thorough study of the related literature in order to establish a clear classification of systems and techniques...

  2. Applying New Network Security Technologies to SCADA Systems.

    Energy Technology Data Exchange (ETDEWEB)

    Hurd, Steven A; Stamp, Jason Edwin; Duggan, David P; Chavez, Adrian R.

    2006-11-01

    Supervisory Control and Data Acquisition (SCADA) systems for automation are very important for critical infrastructure and manufacturing operations. They have been implemented to work in a number of physical environments using a variety of hardware, software, networking protocols, and communications technologies, often before security issues became of paramount concern. To offer solutions to security shortcomings in the short/medium term, this project was to identify technologies used to secure "traditional" IT networks and systems, and then assess their efficacy with respect to SCADA systems. These proposed solutions must be relatively simple to implement, reliable, and acceptable to SCADA owners and operators. 4This page intentionally left blank.

  3. Widely tunable laser technologies: meeting the needs of tomorrow's networks

    Science.gov (United States)

    Day, Timothy; Thompson, Craig B.; Lee, Joseph

    2002-06-01

    Widely tunable lasers are an enabling technology that eliminate many of the limitations of fixed wavelength lasers, and enable new system architectures with increased functionality. Beyond solving the logistical and inventory problems of growing channel counts, tunable lasers enable system architects to implement truly dynamic networks that can adjust to changing network demands in real time. This paper will discuss the general application of tunable lasers and enable functionalities such as real-time channel provisioning, dynamic add/drop and network channel reconfiguration.

  4. Control of coupled oscillator networks with application to microgrid technologies

    Science.gov (United States)

    Arenas, Alex

    The control of complex systems and network-coupled dynamical systems is a topic of vital theoretical importance in mathematics and physics with a wide range of applications in engineering and various other sciences. Motivated by recent research into smart grid technologies, we study the control of synchronization and consider the important case of networks of coupled phase oscillators with nonlinear interactions-a paradigmatic example that has guided our understanding of self-organization for decades. We develop a method for control based on identifying and stabilizing problematic oscillators, resulting in a stable spectrum of eigenvalues, and in turn a linearly stable syn- chronized state. The amount of control, that is, number of oscillators, required to stabilize the network is primarily dictated by the coupling strength, dynamical heterogeneity, and mean degree of the network, and depends little on the structural heterogeneity of the network itself.

  5. Control of coupled oscillator networks with application to microgrid technologies.

    Science.gov (United States)

    Skardal, Per Sebastian; Arenas, Alex

    2015-08-01

    The control of complex systems and network-coupled dynamical systems is a topic of vital theoretical importance in mathematics and physics with a wide range of applications in engineering and various other sciences. Motivated by recent research into smart grid technologies, we study the control of synchronization and consider the important case of networks of coupled phase oscillators with nonlinear interactions-a paradigmatic example that has guided our understanding of self-organization for decades. We develop a method for control based on identifying and stabilizing problematic oscillators, resulting in a stable spectrum of eigenvalues, and in turn a linearly stable synchronized state. The amount of control, that is, number of oscillators, required to stabilize the network is primarily dictated by the coupling strength, dynamical heterogeneity, and mean degree of the network, and depends little on the structural heterogeneity of the network itself.

  6. A novel MLP network implementation in CMOL technology

    Directory of Open Access Journals (Sweden)

    Abdalhossein Rezai

    2014-09-01

    Full Text Available Hybrid CMOS/nanodevice technology is a well-known candidate to extend the exponential Moor-Law progress of microelectronics beyond the 10-nm frontier. This paper presents and evaluates a novel method for synaptic weights implementation of artificial neural networks in CMOL technology, a hybrid CMOS/nanodevice technology. In this novel method, the analog property of the I–V characteristic of the nanodevice is utilized to implement each neuromorphic synaptic weight. Each synaptic weight is also implemented by using one nanodevice instead of several nanodevices. Moreover, the proposed method is applied to the multilayer perceptron (MLP network in CMOL technology. Our analysis shows that the power consumption and speed are effectively improved in the proposed method compared to other methods at the expense of a reasonable overhead defect tolerance.

  7. Technology Acceptance and Social Networking in Distance Learning

    Directory of Open Access Journals (Sweden)

    Barry Davidson

    2003-04-01

    Full Text Available This study examines the use of integrated communication and engineering design tools in a distributed learning environment. We examined students' attitudes toward the technology using two different approaches. First, we utilized the technology acceptance model to investigate the attitude formation process. Then, to investigate how attitudes changed over time, we applied social information processing model using social network analysis method. Using the technology acceptance model, we were able to demonstrate that students’ initial expectation affected the perceptions of, attitudes toward, and use of the system. With social network analysis, we found that one’s attitude change was significantly influenced by other students’ attitude changes. We discussed the uniqueness of distance learning environments in the context of social influence research and how studies of distance learning could contribute to the research on the social influence of technology use.

  8. Software-Defined Networks as a Stage of the Network Technology Evolution

    Directory of Open Access Journals (Sweden)

    A. A. Krasotin

    2013-01-01

    Full Text Available The authors of the article focus on the concept of a software defined network. In the beginning, the brief historical account is given concerning software defined networks as a scientific concept, its formation and technological and scientific meaning. The software defined network concept is treated in the article not as the final state-of-the-art in networking, but rather as a possible step and direction in the development of a networking paradigm. The article touches on pros and cons as well of the software defined networking and gives an account of possible stages of development of this technology in the context of other technologies, considering its hybrid with MPLS, as an example. OpenFlow protocol constitutes the main part of the article. The authors further discuss various kinds of existing libraries realizing programmable management routines for a software defined network using OpenFlow. All of these libraries provide API for building modular applications for software defined network management. Touching on practical side of implementation the results of comparative tests of throughput and latency, achieved with these libraries are shown.

  9. Elastic optical networks architectures, technologies, and control

    CERN Document Server

    Velasco, Luis

    2016-01-01

    This book addresses challenges and potential solutions surrounding the dramatic yearly increases in bandwidth demand. The editors discuss the predicament surrounding current growth, which is predicted to continue because of the proliferation of disruptive, high bandwidth applications like video and cloud applications. They also discuss that in addition to growth, traffic will become much more dynamic, both in time and direction. The contributors show how large changes in traffic magnitude during a 24-hour period can be observed, as day-time business users have very different demands to evening-time residential customers, and how this plays into addressing future challenges. In addition, they discuss potential solutions for the issues surrounding situations where multiple content and cloud service providers offer competing services, causing the traffic direction to become more dynamic. The contributors discuss that although the WDM transponder technology can be upgraded to 100Gb/s in the short to medium term, ...

  10. Feasibility Study of 8-Bit Microcontroller Applications for Ethernet

    Directory of Open Access Journals (Sweden)

    Lech Gulbinovič

    2011-08-01

    Full Text Available Feasibility study of 8-bit microcontroller applications for Ethernet is presented. Designed device is based on ATmega32 microcontroller and 10 Mbps Ethernet controller ENC28J60. Device is simulated as mass queuing theoretical model with ticket booking counter. Practical explorations are accomplished and characteristics are determined. Practical results are compared to theoretical ones. Program code and device packet processing speed optimization are discussed. Microcontroller packet processing speed and packet latency depend on packet size. For ICMP protocol packet processing speed varies 1.4–2.1 Mbps, latency – 0.8–8.4 ms. UDP protocol packet processing speed varies 1.3–1.8 Mbps, latency – 1.1–9.6 ms. Packet processing speed depends on compilation settings and program code compression level. Best results are reached on optimization le­vel ‑O3, then speed increased ~3% but program code size increased 68% comparing to –Os optimization level.Article in Lithuanian

  11. Secure, Mobile, Wireless Network Technology Designed, Developed, and Demonstrated

    Science.gov (United States)

    Ivancic, William D.; Paulsen, Phillip E.

    2004-01-01

    The inability to seamlessly disseminate data securely over a high-integrity, wireless broadband network has been identified as a primary technical barrier to providing an order-of-magnitude increase in aviation capacity and safety. Secure, autonomous communications to and from aircraft will enable advanced, automated, data-intensive air traffic management concepts, increase National Air Space (NAS) capacity, and potentially reduce the overall cost of air travel operations. For the first time ever, secure, mobile, network technology was designed, developed, and demonstrated with state-ofthe- art protocols and applications by a diverse, cooperative Government-industry team led by the NASA Glenn Research Center. This revolutionary technology solution will make fundamentally new airplane system capabilities possible by enabling secure, seamless network connections from platforms in motion (e.g., cars, ships, aircraft, and satellites) to existing terrestrial systems without the need for manual reconfiguration. Called Mobile Router, the new technology autonomously connects and configures networks as they traverse from one operating theater to another. The Mobile Router demonstration aboard the Neah Bay, a U.S. Coast Guard vessel stationed in Cleveland, Ohio, accomplished secure, seamless interoperability of mobile network systems across multiple domains without manual system reconfiguration. The Neah Bay was chosen because of its low cost and communications mission similarity to low-Earth-orbiting satellite platforms. This technology was successfully advanced from technology readiness level (TRL) 2 (concept and/or application formation) to TRL 6 (system model or prototype demonstration in a relevant environment). The secure, seamless interoperability offered by the Mobile Router and encryption device will enable several new, vehicle-specific and systemwide technologies to perform such things as remote, autonomous aircraft performance monitoring and early detection and

  12. Adoption of Social Networking Technology in Teaching and ...

    African Journals Online (AJOL)

    Increase is the effectiveness of teaching and learning through the adoption of social networking technology in the teaching and learning process in Nigeria tertiary institutions, using Michael Okpara University of Agriculture Umudike as case study, is one of the landmark achievements of information and communication ...

  13. Strategic Management of Technology and the Structuring of Industrial Networks

    DEFF Research Database (Denmark)

    Sørensen, Ole H.

    The thesis explores the following question: 'How do actants in industrial companies partake in the enactment of locally embedded and globally reaching industrial networks through participation in technology development activities?' It draws on Actor Netwok Theories and analyses three case stories...

  14. Projekt "Baltenet - The Baltic Technology Network" / Leonid Pai

    Index Scriptorium Estoniae

    Pai, Leonid

    2005-01-01

    Baltenet - The Baltic Technology Network on projekt, mille alusel teevad koostööd tehniliste erialade koolituse arendamiseks Baltimere äärsetes riikides neli kutseõppeasutust Soomest, Rootsist, Lätis ja Eestist. Projekti rahastab Euroopa Liidu Leonardo da Vinci programm

  15. Advanced Communication and Networking Technologies for Mars Exploration

    Science.gov (United States)

    Bhasin, Kul; Hayden, Jeff; Agre, Jonathan R.; Clare, Loren P.; Yan, Tsun-Yee

    2001-01-01

    Next-generation Mars communications networks will provide communications and navigation services to a wide variety of Mars science vehicles including: spacecraft that are arriving at Mars, spacecraft that are entering and descending in the Mars atmosphere, scientific orbiter spacecraft, spacecraft that return Mars samples to Earth, landers, rovers, aerobots, airplanes, and sensing pods. In the current architecture plans, the communication services will be provided using capabilities deployed on the science vehicles as well as dedicated communication satellites that will together make up the Mars network. This network will evolve as additional vehicles arrive, depart or end their useful missions. Cost savings and increased reliability will result from the ability to share communication services between missions. This paper discusses the basic architecture that is needed to support the Mars Communications Network part of NASA's Space Science Enterprise (SSE) communications architecture. The network may use various networking technologies such as those employed in the terrestrial Internet, as well as special purpose deep-space protocols to move data and commands autonomously between vehicles, at disparate Mars vicinity sites (on the surface or in near-Mars space) and between Mars vehicles and earthbound users. The architecture of the spacecraft on-board local communications is being reconsidered in light of these new networking requirements. The trend towards increasingly autonomous operation of the spacecraft is aimed at reducing the dependence on resource scheduling provided by Earth-based operators and increasing system fault tolerance. However, these benefits will result in increased communication and software development requirements. As a result, the envisioned Mars communications infrastructure requires both hardware and protocol technology advancements. This paper will describe a number of the critical technology needs and some of the ongoing research

  16. DESIGN AND IMPLEMENTATION OF CAN / CAN, CAN 1 ETHERNET AND CAN/ATM BRIDGES

    Directory of Open Access Journals (Sweden)

    Hüseyin Ekiz

    1998-06-01

    Full Text Available The Controller Area Network (CAN is a high performance and highly reliable advanced serial cornmunication protocol which effıciently supports distributed real-time control systems at high speed, low cost, and a very high level data security. The CAN was originally developed as an automotive standard for a serial interface between electronic control units, but in a short time, it has become a desirable, cheap solution for networks in industrial environments. The fast growth of the CAN in industrial applications results some potential problems such as the size of the area that the devices, controlled by the CAN, are distributed and the communication between the CAN and the existing network systems (such as Ethernet or ATM. One of the solutions to these problems is to use bridges. However, the characteristics of the CAN creates problems, when CAN segments are connected by a bridge, since CAN frames do not contain any information related to destination address, source address, or LAN number that are used by traditional address-hased bridges for routing decisions. Thus, new bridges (suitable for the CAN protocol features must be designed to overcome the problems. The objective of this paper is not only to investigate the characteristics of bridged CAN systems and to give a bridge proposal to connect CAN segments, but also to design and implement bridges that connect the CAN and existing LAN s and provide communication between them.

  17. Perfect DiViSy technology for video network in medicine (Moscow Information Network for Teleoncology).

    Science.gov (United States)

    Vorozhtcov, G; Chissov, V; Danilov, A; Kazinov, V; Sokolov, V; Frank, G

    1999-01-01

    A large telemedicine project is now under development in Moscow. The general task of the project is to link oncology research centres and hospitals meeting the project profile, and to provide on-line (using real-time video conferences) and off-line (via distributed database of medical information) information exchange. There was no existing technology available for use at the project's base which was ready to meet all requirements, so we are using specially created technology for video networks (DiViSy V.97). We suppose this technology to be more applicable for use in telemedicine networks than are business video conference technologies and classical Internet/Intranet technologies. We affirm in our conclusion that now is the time for developing special telemedicine standards, recommendations of compatibility, etc., and that we are ready to take part in this process.

  18. Home Network Technologies and Automating Demand Response

    Energy Technology Data Exchange (ETDEWEB)

    McParland, Charles

    2009-12-01

    sophisticated energy consumers, it has been possible to improve the DR 'state of the art' with a manageable commitment of technical resources on both the utility and consumer side. Although numerous C & I DR applications of a DRAS infrastructure are still in either prototype or early production phases, these early attempts at automating DR have been notably successful for both utilities and C & I customers. Several factors have strongly contributed to this success and will be discussed below. These successes have motivated utilities and regulators to look closely at how DR programs can be expanded to encompass the remaining (roughly) half of the state's energy load - the light commercial and, in numerical terms, the more important residential customer market. This survey examines technical issues facing the implementation of automated DR in the residential environment. In particular, we will look at the potential role of home automation networks in implementing wide-scale DR systems that communicate directly to individual residences.

  19. Gigabit Satellite Network for NASA's Advanced Communication Technology Satellite (ACTS)

    Science.gov (United States)

    Hoder, Douglas; Bergamo, Marcos

    1996-01-01

    The advanced communication technology satellite (ACTS) gigabit satellite network provides long-haul point-to-point and point-to-multipoint full-duplex SONET services over NASA's ACTS. at rates up to 622 Mbit/s (SONET OC-12), with signal quality comparable to that obtained with terrestrial fiber networks. Data multiplexing over the satellite is accomplished using time-division multiple access (TDMA) techniques coordinated with the switching and beam hopping facilities provided by ACTS. Transmissions through the satellite are protected with Reed-Solomon encoding. providing virtually error-free transmission under most weather conditions. Unique to the system are a TDMA frame structure and satellite synchronization mechanism that allow: (a) very efficient utilization of the satellite capacity: (b) over-the-satellite dosed-loop synchronization of the network in configurations with up to 64 ground stations: and (c) ground station initial acquisition without collisions with existing signalling or data traffic. The user interfaces are compatible with SONET standards, performing the function of conventional SONET multiplexers and. as such. can be: readily integrated with standard SONET fiber-based terrestrial networks. Management of the network is based upon the simple network management protocol (SNMP). and includes an over-the-satellite signalling network and backup terrestrial internet (IP-based) connectivity. A description of the ground stations is also included.

  20. Gene network analysis in plant development by genomic technologies.

    Science.gov (United States)

    Wellmer, Frank; Riechmann, José Luis

    2005-01-01

    The analysis of the gene regulatory networks underlying development is of central importance for a better understanding of the mechanisms that control the formation of the different cell-types, tissues or organs of an organism. The recent invention of genomic technologies has opened the possibility of studying these networks at a global level. In this paper, we summarize some of the recent advances that have been made in the understanding of plant development by the application of genomic technologies. We focus on a few specific processes, namely flower and root development and the control of the cell cycle, but we also highlight landmark studies in other areas that opened new avenues of experimentation or analysis. We describe the methods and the strategies that are currently used for the analysis of plant development by genomic technologies, as well as some of the problems and limitations that hamper their application. Since many genomic technologies and concepts were first developed and tested in organisms other than plants, we make reference to work in non-plant species and compare the current state of network analysis in plants to that in other multicellular organisms.

  1. Practical network design techniques a complete guide for WANs and LANs

    CERN Document Server

    Held, Gilbert

    2004-01-01

    This new edition has two parts. The first part focuses on wide area networks; the second, which is entirely new, focuses on local area networks. Because Ethernet emerged victorious in the LAN war, the second section pays particular attention to Ethernet design and performance characteristics.

  2. An overview on development of neural network technology

    Science.gov (United States)

    Lin, Chun-Shin

    1993-01-01

    The study has been to obtain a bird's-eye view of the current neural network technology and the neural network research activities in NASA. The purpose was two fold. One was to provide a reference document for NASA researchers who want to apply neural network techniques to solve their problems. Another one was to report out survey results regarding NASA research activities and provide a view on what NASA is doing, what potential difficulty exists and what NASA can/should do. In a ten week study period, we interviewed ten neural network researchers in the Langley Research Center and sent out 36 survey forms to researchers at the Johnson Space Center, Lewis Research Center, Ames Research Center and Jet Propulsion Laboratory. We also sent out 60 similar forms to educators and corporation researchers to collect general opinions regarding this field. Twenty-eight survey forms, 11 from NASA researchers and 17 from outside, were returned. Survey results were reported in our final report. In the final report, we first provided an overview on the neural network technology. We reviewed ten neural network structures, discussed the applications in five major areas, and compared the analog, digital and hybrid electronic implementation of neural networks. In the second part, we summarized known NASA neural network research studies and reported the results of the questionnaire survey. Survey results show that most studies are still in the development and feasibility study stage. We compared the techniques, application areas, researchers' opinions on this technology, and many aspects between NASA and non-NASA groups. We also summarized their opinions on difficulties encountered. Applications are considered the top research priority by most researchers. Hardware development and learning algorithm improvement are the next. The lack of financial and management support is among the difficulties in research study. All researchers agree that the use of neural networks could result in

  3. Performance Evaluation of 100 Gigabit Ethernet Switches under Bursty Traffic

    DEFF Research Database (Denmark)

    Ruepp, Sarah Renée; Rytlig, A.; Manolova, Anna Vasileva

    2011-01-01

    Switch fabrics for 100 Gigabit Ethernet systems pose high demands in terms of delay and scalability. In this paper we analyze the performance of a Clos-based switch fabric under uniform and bursty traffic, and compare its performance to a crossbar-based switch design for benchmarking. In particular......) fashion. Simulation results show that for uniform Bernoulli traffic, the DSRR scheme outperforms the others. Under bursty traffic, the DSRR scheme and the random scheme achieve similar performance. The static scheme performs the worst for both cases. Comparing the SMM design to an Output Queued crossbar...... switch only reveals a minor performance penalty, which can be compensated by the high scalability, robustness and low complexity of the Clos-based design for high speed switching systems....

  4. Auto correct method of AD converters precision based on ethernet

    Directory of Open Access Journals (Sweden)

    NI Jifeng

    2013-10-01

    Full Text Available Ideal AD conversion should be a straight zero-crossing line in the Cartesian coordinate axis system. While in practical engineering, the signal processing circuit, chip performance and other factors have an impact on the accuracy of conversion. Therefore a linear fitting method is adopted to improve the conversion accuracy. An automatic modification of AD conversion based on Ethernet is presented by using software and hardware. Just by tapping the mouse, all the AD converter channel linearity correction can be automatically completed, and the error, SNR and ENOB (effective number of bits are calculated. Then the coefficients of linear modification are loaded into the onboard AD converter card's EEPROM. Compared with traditional methods, this method is more convenient, accurate and efficient,and has a broad application prospects.

  5. Time Triggered Ethernet System Testing Means and Method

    Science.gov (United States)

    Smithgall, William Todd (Inventor); Hall, Brendan (Inventor); Varadarajan, Srivatsan (Inventor)

    2014-01-01

    Methods and apparatus are provided for evaluating the performance of a Time Triggered Ethernet (TTE) system employing Time Triggered (TT) communication. A real TTE system under test (SUT) having real input elements communicating using TT messages with output elements via one or more first TTE switches during a first time interval schedule established for the SUT. A simulation system is also provided having input simulators that communicate using TT messages via one or more second TTE switches with the same output elements during a second time interval schedule established for the simulation system. The first and second time interval schedules are off-set slightly so that messages from the input simulators, when present, arrive at the output elements prior to messages from the analogous real inputs, thereby having priority over messages from the real inputs and causing the system to operate based on the simulated inputs when present.

  6. Parallel computing and networking; Heiretsu keisanki to network

    Energy Technology Data Exchange (ETDEWEB)

    Asakawa, E.; Tsuru, T. [Japan National Oil Corp., Tokyo (Japan); Matsuoka, T. [Japan Petroleum Exploration Co. Ltd., Tokyo (Japan)

    1996-05-01

    This paper describes the trend of parallel computers used in geophysical exploration. Around 1993 was the early days when the parallel computers began to be used for geophysical exploration. Classification of these computers those days was mainly MIMD (multiple instruction stream, multiple data stream), SIMD (single instruction stream, multiple data stream) and the like. Parallel computers were publicized in the 1994 meeting of the Geophysical Exploration Society as a `high precision imaging technology`. Concerning the library of parallel computers, there was a shift to PVM (parallel virtual machine) in 1993 and to MPI (message passing interface) in 1995. In addition, the compiler of FORTRAN90 was released with support implemented for data parallel and vector computers. In 1993, networks used were Ethernet, FDDI, CDDI and HIPPI. In 1995, the OC-3 products under ATM began to propagate. However, ATM remains to be an interoffice high speed network because the ATM service has not spread yet for the public network. 1 ref.

  7. Using Internet of Things technologies for wireless sensor networks

    Science.gov (United States)

    Martinez, K.; Hart, J. K.; Basford, P. J.; Bragg, G. M.; Ward, T.

    2013-12-01

    Numerous authors have envisioned the future internet where anything will be connected: the Internet of Things (IoT). The idea is an extrapolation of the spread of networked devices such as phones, tablets etc. Each device is expected to have its own Internet address and thus be easy to access. The key building blocks of any IoT system are networking, hardware platforms and node software - so they are similar to wireless sensor network requirements. Most existing IoT demonstrators and applications have been gadget-style objects where power and connectivity problems are not too restricting. Environmental sensor networks can benefit from using some of the technologies involved in IoT development. However it is expected that tuning the networking and power management will be necessary to make them as efficient as state of the art wireless sensor networks. Some IoT assumptions such as always-connected nodes and full IP capability need to be considered. This paper will illustrate the advantages and disadvantages of IoT techniques for environment sensing drawing on a range of employment scenarios. We also describe a glacial 'Internet of things' project, which aims to monitor glacial processes. In particular we describe the IoT developments in a deployment in Iceland to examine glacier seismicity, velocity and provide camera images.

  8. Katherine: Ethernet Embedded Readout Interface for Timepix3

    Science.gov (United States)

    Burian, P.; Broulím, P.; Jára, M.; Georgiev, V.; Bergmann, B.

    2017-11-01

    The Timepix3—the latest generation of hybrid particle pixel detectors of Medipix family—yields a lot of new possibilities, i.e. a high hit-rate, a time resolution of 1.56 ns, event data-driven readout mode, and the capability of measuring the Time-over-Threshold (ToT - energy) and the Time-of-Arrival (ToA) simultaneously. This paper introduces a newly developed readout device for the Timepix3, called "Katherine", featuring a Gigabit Ethernet interface. The primary benefit of the Katherine is the operation of Timepix3 at long distance (up to 100 m) from computer or server, which is advantageous for the installation at beam lines, where the access is difficult or where radiation levels are too high for human interventions. The maximal hit-rate is limited by the bandwidth of the Ethernet connection (peer-to-peer connection; up to 16 Mhit/s). Since the Katherine interface is equipped with a processor of high computational power (ARM Cortex-A9 dual-core processor), it permits the use as a stand-alone (autonomous) radiation detector. The key features of the device are described in detail. These are the implemented high voltage power supply offering both polarities of bias voltage (up to ± 300 V), the automatic data sending to a sever via SSH, the automatic compensation of ToA values from columns with shifted matrix clock, etc. A dedicated control software was developed, which can be used for the detector preparation (sensor equalization, the DACs dependency scan, and the THL scan) and measurement control. Measured energy spectra from photon fields are shown.

  9. The Networking and Information Technology Research and Development NITRD Program 2012 Strategic Plan

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — Information technology IT computers, wired and wireless digital networks, electronic data and information, IT devices and systems, and software applications?today...

  10. Cooperative MIMO technology in multiple hops wireless sensor networks

    Science.gov (United States)

    Yuan, Lina; Chen, Huajun; Gong, Jing

    2017-03-01

    The limited lifetime is one of the important factors restricted wireless sensor networks (WSNs), when possible, wireless nodes often operate with small batteries, while battery replacement is a very difficult and expensive. So the nodes must work long hours in the case of no battery replacement. Therefore, in WSNs, minimizing energy consumption is an important design consideration, at the same time, the transmission strategies of energy efficiency must be used for data forwarding. This paper, using cooperative multiple input multiple output(MIMO) technology combined with multiple hops technology, has put forward a new transmission model, i.e., the MIMO-MISO(multi-input multi-output)/MIMO-MIMO model. Simulation results demonstrate the proposed MIMO-MISO/MIMO-MIMO to minimize energy consumption of each node every node for multi-hop WSNs, to save a great deal of energy for a larger transmission distance, which makes the life of the entire network be extended.

  11. Arquiteturas para um dispositivo de demarcação ethernet

    OpenAIRE

    Chris Dennis Tomas Horna

    2009-01-01

    Na atualidade, as redes públicas de comunicação de dados representam uma nova oportunidade para a aplicação das tecnologias IEEE 802 (baseadas na tecnologia Ethernet). Tanto nas redes de acesso, como nas redes metropolitanas e de núcleo, existe uma crescente demanda pela instalação de equipamentos com grande número de interfaces Ethernet. Em alguns casos, opta-se por equipamentos capazes de emular os serviços das tecnologias legadas ATM/SDH sobre Ethernet e viceversa. Nesse sentido, novos pro...

  12. Privacy and technology challenges for ubiquitous social networking

    DEFF Research Database (Denmark)

    Sapuppo, Antonio; Seet, Boon-Chong

    2015-01-01

    architectures and techniques for enabling social interactions between participants. Finally, we identify privacy as the major challenge for networking in USN environments. Consequently, we depict design guidelines and review privacy protection models for facilitating personal information disclosure.......Ubiquitous social networking (USN) can be seen as an evolution of ubiquitous computing supporting the social well–being of people in their everyday lives. The vision of USN focuses on enhancing social interactions among its participants during users' physical meetings. This target is leading...... towards important challenges such as social sensing, enabling social networking and privacy protection. In this paper we firstly investigate the methods and technologies for acquisition of the relevant context for promotion of sociability among inhabitants of USN environments. Afterwards, we review...

  13. Synchronization challenges in packet-based Cloud-RAN fronthaul for mobile networks

    DEFF Research Database (Denmark)

    Checko, Aleksandra; Juul, Anders Christian; Christiansen, Henrik Lehrmann

    2015-01-01

    In this paper, we look at reusing existing packet-based network (e.g. Ethernet) to possibly decrease deployment costs of fronthaul Cloud Radio Access Network (C-RAN) network and cost of Baseband Unit (BBU) resources. The challenge of this solution is that it requires mobile traffic (until now...... transmitted over synchronous protocols) to traverse the asynchronous Ethernet without losing synchronization. We analyze synchronization requirements of mobile networks and present an overview of solutions that fulfill them in traditional mobile networks. Then we elaborate on challenges that packet...... bridge the gap between Ethernet and mobile network domains creating a comprehensive architectural analysis....

  14. Performance Evaluation of Non-commercial LTE Network For Smart Grid Application : Modification of IEC 61850-90-5 Protocol stack and its Testing over Non-commercial LTE

    OpenAIRE

    Bogati, Rajendra

    2017-01-01

    The introduction of smart grid technology has changed the way traditional power grid network function. It made the grid structure more dynamic by enhancing electrical usage management capability. Also, it has increased the scope to enhance communication infrastructure in a smart grid structure. The current smart grid solution is based on IEC 61850 architecture where the exchange of information between the electrical utilities is over the fast Ethernet LAN connection. This communication mechan...

  15. IR sensors and imagers in networked operations

    Science.gov (United States)

    Breiter, Rainer; Cabanski, Wolfgang

    2005-05-01

    "Network-centric Warfare" is a common slogan describing an overall concept of networked operation of sensors, information and weapons to gain command and control superiority. Referring to IR sensors, integration and fusion of different channels like day/night or SAR images or the ability to spread image data among various users are typical requirements. Looking for concrete implementations the German Army future infantryman IdZ is an example where a group of ten soldiers build a unit with every soldier equipped with a personal digital assistant (PDA) for information display, day photo camera and a high performance thermal imager for every unit. The challenge to allow networked operation among such a unit is bringing information together and distribution over a capable network. So also AIM's thermal reconnaissance and targeting sight HuntIR which was selected for the IdZ program provides this capabilities by an optional wireless interface. Besides the global approach of Network-centric Warfare network technology can also be an interesting solution for digital image data distribution and signal processing behind the FPA replacing analog video networks or specific point to point interfaces. The resulting architecture can provide capabilities of data fusion from e.g. IR dual-band or IR multicolor sensors. AIM has participated in a German/UK collaboration program to produce a demonstrator for day/IR video distribution via Gigabit Ethernet for vehicle applications. In this study Ethernet technology was chosen for network implementation and a set of electronics was developed for capturing video data of IR and day imagers and Gigabit Ethernet video distribution. The demonstrator setup follows the requirements of current and future vehicles having a set of day and night imager cameras and a crew station with several members. Replacing the analog video path by a digital video network also makes it easy to implement embedded training by simply feeding the network with

  16. Formal Variability of Terms in the Sphere of Network Technologies

    Directory of Open Access Journals (Sweden)

    Roman Viktorovich Deniko

    2015-09-01

    Full Text Available The article addresses the problem of formal variability of terms in the sphere of network terminology in the Russian language. The research is based on data from the Internet communication in the sphere of network technologies. Such formal variability types as graphical, phonemic, word building and complex (graphic and phonetic, morphologic and accentual are discussed in this article. The authors reveal the reasons for graphic variability of foreign origin terms making up the international terminological fund. These reasons cover such aspects as the use of graphics of source language and recipient language; the presence or absence of hyphenation, etc. It is determined that the phonemic variants of terms appear as a result of oral or written borrowings. The existence of such variants is also connected with the stage of their adaptation in the Russian language after borrowing. In this case the variants are related with soft or hard pronunciation of consonants. There are also some cases of phonemic variability on the graphic level. The complex variability is regarded as a part of active processes taking place in the modern Russian language, and these processes involve both native and foreign origin terms. The particular attention is paid to the word-building variants – word-building affixes the variability of which is peculiar of network technologies. The results of the research show that the variability of professional units belonging to the network technologies sublanguage is caused by the active process of borrowing of specialpurpose vocabulary into the Russian language. The process is due to the intensification of intercultural communication in the professional spheres.

  17. Sledování teploty po síti Ethernet

    OpenAIRE

    Khait, Ranny

    2012-01-01

    Hlavním tématem práce je měření a přenos teploty po síti Ethernet. Práce obsahuje teoretický úvod, ve kterém jsou popsány různé typy senzorů, měření teploty, Ethernet a návrh systému a výběr součástek. Praktická část je zaměřená na realizaci systému, popis programu a odesílání změřených hodnot po síti Ethernet. The main topic of the presented thesis is temperature monitoring via Ethernet. This thesis contains theoretical part, in which are described different types of sensors, temperature ...

  18. A Lossless Network for Data Acquisition

    CERN Document Server

    AUTHOR|(SzGeCERN)698154; The ATLAS collaboration; Lehmann Miotto, Giovanna

    2016-01-01

    The planned upgrades of the experiments at the Large Hadron Collider at CERN will require higher bandwidth networks for their data acquisition systems. The network congestion problem arising from the bursty many-to-one communication pattern, typical for these systems, will become more demanding. It is questionable whether commodity TCP/IP and Ethernet technologies in their current form will be still able to effectively adapt to the bursty traffic without losing packets due to the scarcity of buffers in the networking hardware. We continue our study of the idea of lossless switching in software running on commercial-off-the-shelf servers for data acquisition systems, using the ATLAS experiment as a case study. The flexibility of design in software, performance of modern computer platforms, and buffering capabilities constrained solely by the amount of DRAM memory are a strong basis for building a network dedicated to data acquisition with commodity hardware, which can provide reliable transport in congested co...

  19. PREFACE: Complex Networks: from Biology to Information Technology

    Science.gov (United States)

    Barrat, A.; Boccaletti, S.; Caldarelli, G.; Chessa, A.; Latora, V.; Motter, A. E.

    2008-06-01

    The field of complex networks is one of the most active areas in contemporary statistical physics. Ten years after seminal work initiated the modern study of networks, interest in the field is in fact still growing, as indicated by the ever increasing number of publications in network science. The reason for such a resounding success is most likely the simplicity and broad significance of the approach that, through graph theory, allows researchers to address a variety of different complex systems within a common framework. This special issue comprises a selection of contributions presented at the workshop 'Complex Networks: from Biology to Information Technology' held in July 2007 in Pula (Cagliari), Italy as a satellite of the general conference STATPHYS23. The contributions cover a wide range of problems that are currently among the most important questions in the area of complex networks and that are likely to stimulate future research. The issue is organised into four sections. The first two sections describe 'methods' to study the structure and the dynamics of complex networks, respectively. After this methodological part, the issue proceeds with a section on applications to biological systems. The issue closes with a section concentrating on applications to the study of social and technological networks. The first section, entitled Methods: The Structure, consists of six contributions focused on the characterisation and analysis of structural properties of complex networks: The paper Motif-based communities in complex networks by Arenas et al is a study of the occurrence of characteristic small subgraphs in complex networks. These subgraphs, known as motifs, are used to define general classes of nodes and their communities by extending the mathematical expression of the Newman-Girvan modularity. The same line of research, aimed at characterising network structure through the analysis of particular subgraphs, is explored by Bianconi and Gulbahce in Algorithm

  20. Home Area Networks and the Smart Grid

    Energy Technology Data Exchange (ETDEWEB)

    Clements, Samuel L.; Carroll, Thomas E.; Hadley, Mark D.

    2011-04-01

    With the wide array of home area network (HAN) options being presented as solutions to smart grid challenges for the home, it is time to compare and contrast their strengths and weaknesses. This white paper examines leading and emerging HAN technologies. The emergence of the smart grid is bringing more networking players into the field. The need for low consistent bandwidth usage differs enough from the traditional information technology world to open the door to new technologies. The predominant players currently consist of a blend of the old and new. Within the wired world Ethernet and HomePlug Green PHY are leading the way with an advantage to HomePlug because it doesn't require installing new wires. In the wireless the realm there are many more competitors but WiFi and ZigBee seem to have the most momentum.

  1. An Overview on Wireless Sensor Networks Technology and Evolution

    Directory of Open Access Journals (Sweden)

    Chiara Buratti

    2009-08-01

    Full Text Available Wireless sensor networks (WSNs enable new applications and require non-conventional paradigms for protocol design due to several constraints. Owing to the requirement for low device complexity together with low energy consumption (i.e., long network lifetime, a proper balance between communication and signal/data processing capabilities must be found. This motivates a huge effort in research activities, standardization process, and industrial investments on this field since the last decade. This survey paper aims at reporting an overview of WSNs technologies, main applications and standards, features in WSNs design, and evolutions. In particular, some peculiar applications, such as those based on environmental monitoring, are discussed and design strategies highlighted; a case study based on a real implementation is also reported. Trends and possible evolutions are traced. Emphasis is given to the IEEE 802.15.4 technology, which enables many applications of WSNs. Some example of performance characteristics of 802.15.4-based networks are shown and discussed as a function of the size of the WSN and the data type to be exchanged among nodes.

  2. An Overview on Wireless Sensor Networks Technology and Evolution

    Science.gov (United States)

    Buratti, Chiara; Conti, Andrea; Dardari, Davide; Verdone, Roberto

    2009-01-01

    Wireless sensor networks (WSNs) enable new applications and require non-conventional paradigms for protocol design due to several constraints. Owing to the requirement for low device complexity together with low energy consumption (i.e., long network lifetime), a proper balance between communication and signal/data processing capabilities must be found. This motivates a huge effort in research activities, standardization process, and industrial investments on this field since the last decade. This survey paper aims at reporting an overview of WSNs technologies, main applications and standards, features in WSNs design, and evolutions. In particular, some peculiar applications, such as those based on environmental monitoring, are discussed and design strategies highlighted; a case study based on a real implementation is also reported. Trends and possible evolutions are traced. Emphasis is given to the IEEE 802.15.4 technology, which enables many applications of WSNs. Some example of performance characteristics of 802.15.4-based networks are shown and discussed as a function of the size of the WSN and the data type to be exchanged among nodes. PMID:22423202

  3. Social networking technology, social network composition, and reductions in substance use among homeless adolescents.

    Science.gov (United States)

    Rice, Eric; Milburn, Norweeta G; Monro, William

    2011-03-01

    Peer-based prevention programs for homeless youth are complicated by the potential for reinforcing high-risk behaviors among participants. The goal of this study is to understand how homeless youth could be linked to positive peers in prevention programming by understanding where in social and physical space positive peers for homeless youth are located, how these ties are associated with substance use, and the role of social networking technologies (e.g., internet and cell phones) in this process. Personal social network data were collected from 136 homeless adolescents in Los Angeles, CA. Respondents reported on composition of their social networks with respect to: home-based peers and parents (accessed via social networking technology; e.g., the internet, cell phone, texting), homeless peers and agency staff (accessed face-to-face) and whether or not network members were substance-using or non-substance-using. Associations between respondent's lifetime cocaine, heroin, and methamphetamine use and recent (previous 30 days) alcohol and marijuana use were assessed by the number of non-substance-using versus substance-using ties in multivariate linear regression models. 43% of adolescents reported a non-substance-using home-based tie. More of these ties were associated with less recent alcohol use. 62% of adolescents reported a substance-using homeless tie. More of these ties were associated with more recent marijuana use as well as more lifetime heroin and methamphetamine use. For homeless youth, who are physically disconnected from positive peers, social networking technologies can be used to facilitate the sorts of positive social ties that effective peer-based prevention programs require.

  4. Examining Engineering & Technology Students' Acceptance of Network Virtualization Technology Using the Technology Acceptance Model

    Science.gov (United States)

    Yousif, Wael K.

    2010-01-01

    This causal and correlational study was designed to extend the Technology Acceptance Model (TAM) and to test its applicability to Valencia Community College (VCC) Engineering and Technology students as the target user group when investigating the factors influencing their decision to adopt and to utilize VMware as the target technology. In…

  5. 76 FR 23812 - Reliability and Continuity of Communications Networks, Including Broadband Technologies; Effects...

    Science.gov (United States)

    2011-04-28

    ... they begin to deploy Smart Grid. Hospitals and healthcare providers can leverage broadband technologies... COMMISSION Reliability and Continuity of Communications Networks, Including Broadband Technologies; Effects... broadband technologies. 4. Today's increasingly interconnected world is one in which communications services...

  6. An open, interoperable, and scalable prehospital information technology network architecture.

    Science.gov (United States)

    Landman, Adam B; Rokos, Ivan C; Burns, Kevin; Van Gelder, Carin M; Fisher, Roger M; Dunford, James V; Cone, David C; Bogucki, Sandy

    2011-01-01

    Some of the most intractable challenges in prehospital medicine include response time optimization, inefficiencies at the emergency medical services (EMS)-emergency department (ED) interface, and the ability to correlate field interventions with patient outcomes. Information technology (IT) can address these and other concerns by ensuring that system and patient information is received when and where it is needed, is fully integrated with prior and subsequent patient information, and is securely archived. Some EMS agencies have begun adopting information technologies, such as wireless transmission of 12-lead electrocardiograms, but few agencies have developed a comprehensive plan for management of their prehospital information and integration with other electronic medical records. This perspective article highlights the challenges and limitations of integrating IT elements without a strategic plan, and proposes an open, interoperable, and scalable prehospital information technology (PHIT) architecture. The two core components of this PHIT architecture are 1) routers with broadband network connectivity to share data between ambulance devices and EMS system information services and 2) an electronic patient care report to organize and archive all electronic prehospital data. To successfully implement this comprehensive PHIT architecture, data and technology requirements must be based on best available evidence, and the system must adhere to health data standards as well as privacy and security regulations. Recent federal legislation prioritizing health information technology may position federal agencies to help design and fund PHIT architectures.

  7. Function-Oriented Networking and On-Demand Routing System in Network Using Ant Colony Optimization Algorithm

    Directory of Open Access Journals (Sweden)

    Young-Bo Sim

    2017-11-01

    Full Text Available In this paper, we proposed and developed Function-Oriented Networking (FON, a platform for network users. It has a different philosophy as opposed to technologies for network managers of Software-Defined Networking technology, OpenFlow. It is a technology that can immediately reflect the demands of the network users in the network, unlike the existing OpenFlow and Network Functions Virtualization (NFV, which do not reflect directly the needs of the network users. It allows the network user to determine the policy of the direct network, so it can be applied more precisely than the policy applied by the network manager. This is expected to increase the satisfaction of the service users when the network users try to provide new services. We developed FON function that performs on-demand routing for Low-Delay Required service. We analyzed the characteristics of the Ant Colony Optimization (ACO algorithm and found that the algorithm is suitable for low-delay required services. It was also the first in the world to implement the routing software using ACO Algorithm in the real Ethernet network. In order to improve the routing performance, several algorithms of the ACO Algorithm have been developed to enable faster path search-routing and path recovery. The relationship between the network performance index and the ACO routing parameters is derived, and the results are compared and analyzed. Through this, it was possible to develop the ACO algorithm.

  8. Automated ethernet-based test setup for long wave infrared camera analysis and algorithm evaluation

    Science.gov (United States)

    Edeler, Torsten; Ohliger, Kevin; Lawrenz, Sönke; Hussmann, Stephan

    2009-06-01

    In this paper we consider a new way for automated camera calibration and specification. The proposed setup is optimized for working with uncooled long wave infrared (thermal) cameras, while the concept itself is not restricted to those cameras. Every component of the setup like black body source, climate chamber, remote power switch, and the camera itself is connected to a network via Ethernet and a Windows XP workstation is controlling all components by the use of the TCL - script language. Beside the job of communicating with the components the script tool is also capable to run Matlab code via the matlab kernel. Data exchange during the measurement is possible and offers a variety of different advantages from drastically reduction of the amount of data to enormous speedup of the measuring procedure due to data analysis during measurement. A parameter based software framework is presented to create generic test cases, where modification to the test scenario does not require any programming skills. In the second part of the paper the measurement results of a self developed GigE-Vision thermal camera are presented and correction algorithms, providing high quality image output, are shown. These algorithms are fully implemented in the FPGA of the camera to provide real time processing while maintaining GigE-Vision as standard transmission protocol as an interface to arbitrary software tools. Artefacts taken into account are spatial noise, defective pixel and offset drift due to self heating after power on.

  9. Distrubtion Tolerant Network Technology Flight Validation Report: DINET

    Science.gov (United States)

    Jones, Ross M.

    2009-01-01

    In October and November of 2008, the Jet Propulsion Laboratory installed and tested essential elements of Delay/Disruption Tolerant Networking (DTN) technology on the Deep Impact spacecraft. This experiment, called Deep Impact Network Experiment (DINET), was performed in close cooperation with the EPOXI project which has responsibility for the spacecraft. During DINET some 300 images were transmitted from the JPL nodes to the spacecraft. Then, they were automatically forwarded from the spacecraft back to the JPL nodes, exercising DTN's bundle origination, transmission, acquisition, dynamic route computation, congestion control, prioritization, custody transfer, and automatic retransmission procedures, both on the spacecraft and on the ground, over a period of 27 days. All transmitted bundles were successfully received, without corruption. The DINET experiment demonstrated DTN readiness for operational use in space missions.

  10. ACTS TDMA network control. [Advanced Communication Technology Satellite

    Science.gov (United States)

    Inukai, T.; Campanella, S. J.

    1984-01-01

    This paper presents basic network control concepts for the Advanced Communications Technology Satellite (ACTS) System. Two experimental systems, called the low-burst-rate and high-burst-rate systems, along with ACTS ground system features, are described. The network control issues addressed include frame structures, acquisition and synchronization procedures, coordinated station burst-time plan and satellite-time plan changes, on-board clock control based on ground drift measurements, rain fade control by means of adaptive forward-error-correction (FEC) coding and transmit power augmentation, and reassignment of channel capacities on demand. The NASA ground system, which includes a primary station, diversity station, and master control station, is also described.

  11. Distribution Tolerant Network Technology Flight Validation Report: DINET

    Science.gov (United States)

    Jones, Ross M.

    2009-01-01

    In October and November of 2008, the Jet Propulsion Laboratory installed and tested essential elements of Delay/Disruption Tolerant Networking (DTN) technology on the Deep Impact spacecraft. This experiment, called Deep Impact Network Experiment (DINET), was performed in close cooperation with the EPOXI project which has responsibility for the spacecraft. During DINET some 300 images were transmitted from the JPL nodes to the spacecraft. Then, they were automatically forwarded from the spacecraft back to the JPL nodes, exercising DTN's bundle origination, transmission, acquisition, dynamic route computation, congestion control, prioritization, custody transfer, and automatic retransmission procedures, both on the spacecraft and on the ground, over a period of 27 days. All transmitted bundles were successfully received, without corruption. The DINET experiment demonstrated DTN readiness for operational use in space missions.

  12. Feature detection in satellite images using neural network technology

    Science.gov (United States)

    Augusteijn, Marijke F.; Dimalanta, Arturo S.

    1992-01-01

    A feasibility study of automated classification of satellite images is described. Satellite images were characterized by the textures they contain. In particular, the detection of cloud textures was investigated. The method of second-order gray level statistics, using co-occurrence matrices, was applied to extract feature vectors from image segments. Neural network technology was employed to classify these feature vectors. The cascade-correlation architecture was successfully used as a classifier. The use of a Kohonen network was also investigated but this architecture could not reliably classify the feature vectors due to the complicated structure of the classification problem. The best results were obtained when data from different spectral bands were fused.

  13. Integrating Space Communication Network Capabilities via Web Portal Technologies

    Science.gov (United States)

    Johnston, Mark D.; Lee, Carlyn-Ann; Lau, Chi-Wung; Cheung, Kar-Ming; Levesque, Michael; Carruth, Butch; Coffman, Adam; Wallace, Mike

    2014-01-01

    We have developed a service portal prototype as part of an investigation into the feasibility of using Java portlet technology as a means of providing integrated access to NASA communications network services. Portal servers provide an attractive platform for this role due to the various built-in collaboration applications they can provide, combined with the possibility to develop custom inter-operating portlets to extent their functionality while preserving common presentation and behavior. This paper describes various options for integration of network services related to planning and scheduling, and results based on use of a popular open-source portal framework. Plans are underway to develop an operational SCaN Service Portal, building on the experiences reported here.

  14. Software Switching for High Throughput Data Acquisition Networks

    CERN Document Server

    AUTHOR|(CDS)2089787; Lehmann Miotto, Giovanna

    The bursty many-to-one communication pattern, typical for data acquisition systems, is particularly demanding for commodity TCP/IP and Ethernet technologies. The problem arising from this pattern is widely known in the literature as \\emph{incast} and can be observed as TCP throughput collapse. It is a result of overloading the switch buffers, when a specific node in a network requests data from multiple sources. This will become even more demanding for future upgrades of the experiments at the Large Hadron Collider at CERN. It is questionable whether commodity TCP/IP and Ethernet technologies in their current form will be still able to effectively adapt to bursty traffic without losing packets due to the scarcity of buffers in the networking hardware. This thesis provides an analysis of TCP/IP performance in data acquisition networks and presents a novel approach to incast congestion in these networks based on software-based packet forwarding. Our first contribution lies in confirming the strong analogies bet...

  15. Technology and knowledge flow the power of networks

    CERN Document Server

    Trentin, Guglielmo

    2011-01-01

    This book outlines how network technology can support, foster and enhance the Knowledge Management, Sharing and Development (KMSD) processes in professional environments through the activation of both formal and informal knowledge flows. Understanding how ICT can be made available to such flows in the knowledge society is a factor that cannot be disregarded and is confirmed by the increasing interest of companies in new forms of software-mediated social interaction. The latter factor is in relation both to the possibility of accelerating internal communication and problem solving processes, an

  16. A Survey of Key Technology of Network Public Opinion Analysis

    Directory of Open Access Journals (Sweden)

    Li Su Ying

    2016-01-01

    Full Text Available The internet has become an important base for internet users to make comments because of its interactivity and fast dissemination. The outbreak of internet public opinion has become a major risk for network information security. Domestic and foreign researchers had carried out extensive and in-depth study on public opinion. Fruitful results have achieved in the basic theory research and emergency handling and other aspects of public opinion. But research on the public opinion in China is still in the initial stage, the key technology of the public opinion analysis is still as a starting point for in-depth study and discussion.

  17. Wireless body area networks technology, implementation, and applications

    CERN Document Server

    Yuce, Mehmet R

    2011-01-01

    The book provides a comprehensive overview for the latest WBAN systems, technologies, and applications. The chapters of the book have been written by various specialists who are experts in their areas of research and practice. The book starts with the basic techniques involved in designing and building WBAN systems. It explains the deployment issues and then moves into the application areas of WBAN. The remaining chapters focus on the development of hardware, signal processing algorithms, and wireless communication and network design for wearable and implantable body sensors used in WBAN appli

  18. Visualising Actor Network for Cooperative Systems in Marine Technology

    DEFF Research Database (Denmark)

    Pan, Yushan; Finken, Sisse

    2016-01-01

    that shape computer systems. The aim, thus, is to portray cooperative work in a way that can be valuable for engineers implementing marine technology. We do so by way of presenting a transferring technique (2T) using insights from the CSCW field and Actor Network Theory (ANT).......Awareness is a concept familiar to specialists within the field of Computer Supported Cooperative Work (CSCW). It is superior for analysing and describing some of the ad hoc work activities that unfold in cooperation. Such informal activities are outside the scope of engineers’ formal models, which...

  19. Visualising Actor Network for Cooperative Systems in Marine Technology

    DEFF Research Database (Denmark)

    Pan, Yushan; Finken, Sisse

    2016-01-01

    Awareness is a concept familiar to specialists within the field of Computer Supported Cooperative Work (CSCW). It is superior for analysing and describing some of the ad hoc work activities that unfold in cooperation. Such informal activities are outside the scope of engineers’ formal models, whi...... that shape computer systems. The aim, thus, is to portray cooperative work in a way that can be valuable for engineers implementing marine technology. We do so by way of presenting a transferring technique (2T) using insights from the CSCW field and Actor Network Theory (ANT)....

  20. Making Wireless Networks Secure for NASA Mission Critical Applications Using Virtual Private Network (VPN) Technology

    Science.gov (United States)

    Nichols, Kelvin F.; Best, Susan; Schneider, Larry

    2004-01-01

    With so many security issues involved with wireless networks, the technology has not been fully utilized in the area of mission critical applications. These applications would include the areas of telemetry, commanding, voice and video. Wireless networking would allow payload operators the mobility to take computers outside of the control room to their off ices and anywhere else in the facility that the wireless network was extended. But the risk is too great of having someone sit just inside of your wireless network coverage and intercept enough of your network traffic to steal proprietary data from a payload experiment or worse yet hack back into your system and do even greater harm by issuing harmful commands. Wired Equivalent Privacy (WEP) is improving but has a ways to go before it can be trusted to protect mission critical data. Today s hackers are becoming more aggressive and innovative, and in order to take advantage of the benefits that wireless networking offer, appropriate security measures need to be in place that will thwart hackers. The Virtual Private Network (VPN) offers a solution to the security problems that have kept wireless networks from being used for mission critical applications. VPN provides a level of encryption that will ensure that data is protected while it is being transmitted over a wireless local area network (LAN). The VPN allows a user to authenticate to the site that the user needs to access. Once this authentication has taken place the network traffic between that site and the user is encapsulated in VPN packets with the Triple Data Encryption Standard (3DES). 3DES is an encryption standard that uses a single secret key to encrypt and decrypt data. The length of the encryption key is 168 bits as opposed to its predecessor DES that has a 56-bit encryption key. Even though 3DES is the common encryption standard for today, the Advance Encryption Standard (AES), which provides even better encryption at a lower cycle cost is growing

  1. Review and evaluation of the Office of Science and Technology`s Community Leaders Network

    Energy Technology Data Exchange (ETDEWEB)

    Carnes, S.A.; Schweitzer, M.; Peelle, E.R.

    1997-08-01

    This report constitutes a review and evaluation of the Community Leaders Network (CLN), an informally structured national stakeholder group sponsored by the Department of Energy (DOE) Environmental Management (EM) Program`s Office of Science and Technology (OST) to obtain citizen input into the technology research and development programs of the OST. Since the CLN`s inception in 1993, its participants, currently numbering about 35 members mostly from jurisdictions hosting DOE waste management and environmental remediation sites, and its clients (i.e., OST) have invested substantial resources to develop the capability to enhance technology development and deployment activities through proactive stakeholder involvement. The specific objectives of the CLN are to: provide feedback and input to OST on technology development activities; provide information on OST ideas and approaches to key stakeholder groups, and provide input to OST on stakeholder concerns and involvement.

  2. Utilizing HPC Network Technologies in High Energy Physics Experiments

    CERN Document Server

    AUTHOR|(CDS)2088631; The ATLAS collaboration

    2017-01-01

    Because of their performance characteristics high-performance fabrics like Infiniband or OmniPath are interesting technologies for many local area network applications, including data acquisition systems for high-energy physics experiments like the ATLAS experiment at CERN. This paper analyzes existing APIs for high-performance fabrics and evaluates their suitability for data acquisition systems in terms of performance and domain applicability. The study finds that existing software APIs for high-performance interconnects are focused on applications in high-performance computing with specific workloads and are not compatible with the requirements of data acquisition systems. To evaluate the use of high-performance interconnects in data acquisition systems a custom library, NetIO, is presented and compared against existing technologies. NetIO has a message queue-like interface which matches the ATLAS use case better than traditional HPC APIs like MPI. The architecture of NetIO is based on a interchangeable bac...

  3. The new LHCb trigger and DAQ strategy a system architecture based on gigabit-ethernet

    CERN Document Server

    Barczyk, A; Gaspar, C; Gavillet, P; Jacobsson, R; Jost, B; Neufeld, N; Vannerem, P

    2004-01-01

    The LHCb software trigger has two levels: a high-speed trigger running at 1 MHz with strictly limited latency and a second level running below 40 kHz without latency limitations. The trigger strategy requires full flexibility in the distribution of the installed CPU power to the two software trigger levels because of the unknown background levels and event topology distribution at the time the LHC accelerator will start its operation. This requirement suggests using a common CPU farm for both trigger levels fed by a common data acquisition (DAQ) infrastructure. The limited latency budget of the first level of software trigger has an impact on the organization of the CPU farm performing the trigger function for optimal usage of the installed CPU power. We will present the architecture and the design of the hardware infrastructure for the entire LHCb software triggering system based on Ethernet as link technology that fulfills these requirements. The performance of the event-building of the combined traffic of ...

  4. IPbus A flexible Ethernet-based control system for xTCA hardware

    CERN Document Server

    Williams, Thomas Stephen

    2014-01-01

    The ATCA and uTCA standards include industry-standard data pathway technologies such as Gigabit Ethernet which can be used for control communication, but no specific hardware control protocol is defined. The IPbus suite of software and firmware implements a reliable high-performance control link for particle physics electronics, and has successfully replaced VME control in several large projects. In this paper, we outline the IPbus system architecture, and describe recent developments in the reliability, scalability and performance of IPbus systems, carried out in preparation for deployment of uTCA-based CMS upgrades before the LHC 2015 run. We also discuss plans for future development of the IPbus suite.SUMMARY IPbus will be used for controlling the uTCA electronics in the CMS HCAL, TCDS, Pixel and Level-1 trigger upgrades. IPbus control has already been extensively used in the work of these upgrade projects so far, and final uTCA systems will be deployed in the experiment starting from Autumn 2014. IPbus is...

  5. Social network influences on technology acceptance : A matter of tie strength, centrality and density

    NARCIS (Netherlands)

    Ten Kate, Stephan; Haverkamp, Sophie; Mahmood, Fariha; Feldberg, Frans

    2010-01-01

    This study examines social network influences on the individual technology acceptance. Since it is believed that individuals' trust, opinions and behavior are influenced by their network, an analysis of that network may help to provide some explanations on technology acceptance. However, since

  6. 75 FR 55360 - Networking and Information Technology Research and Development (NITRD) Program: Draft NITRD 2010...

    Science.gov (United States)

    2010-09-10

    ... Networking and Information Technology Research and Development (NITRD) Program: Draft NITRD 2010 Strategic Plan AGENCY: The National Coordination Office (NCO) for Networking and Information Technology Research.... EDT on October 11, 2010. SUMMARY: With this notice, the National Coordination Office for Networking...

  7. Proceedings of the electricity distribution information systems and technology conference : smart technology : evolution or revolution

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This conference provided a forum for electric utility operators, electrical engineers, and IT professionals to discuss smart technology applications for managing electrical supply and distribution. Recent advances in 3-D visualization and smart grid technologies were discussed as well as issues related to ethernet networks and grid intelligence technologies. Developments in virtualization and their potential applications in the electric power industry were evaluated. Distribution automation innovations were reviewed. Technical challenges related to the recent growth in distributed generation connections were also discussed, as well as electronic records management and cyber security strategies. Smart meters and home energy network innovations were presented. Other topics included meter data management techniques, design considerations for control centres, and the development of data stores for smart meters. The conference featured 23 presentations, of which 4 have been catalogued separately for inclusion in this database. tabs., figs.

  8. MUPBED - interworking challenges in a multi-domain and multi-technology network environment

    DEFF Research Database (Denmark)

    Foisel, Hans-Martin; Spaeth, Jan; Cavazzoni, Carlo

    2007-01-01

    Todays data transport networks are evolving continuously towards customer oriented and application aware networks. This evolution happens in Europe in a highly diverse network environment, covering multiple network domains, layers, technologies, control and management approaches. In this paper......, the issues, challenges and the solutions developed in the IST project MUPBED (,,Multi-Partner European Test Beds for Research Networking; www.ist-mupbed.eu) for seamless interworking in a typical European heterogeneous network environment are described, addressing horizontal, interdomain, and vertical, inter...

  9. Global crop improvement networks to bridge technology gaps.

    Science.gov (United States)

    Reynolds, Matthew P; Hellin, Jonathan; Govaerts, Bram; Kosina, Petr; Sonder, Kai; Hobbs, Peter; Braun, Hans

    2012-01-01

    To ensure future food security, there is an urgent need for improved co-ordination of agricultural research. While advances in biotechnology hold considerable promise, significant technology gaps exist that may reduce their impact. Examples include an incomplete knowledge of target breeding environments, a limited understanding and/or application of optimal crop management practices, and underfunded extension services. A better co-ordinated and more globalized approach to agricultural research through the implementation of Global Crop Improvement Networks (GCIN) is proposed. Such networks could underpin agricultural research and development by providing the following types of services: (i) increased resolution and precision of environmental information, including meteorological data, soil characteristics, hydrological data, and the identification of environmental 'hotspots' for a range of biotic, abiotic, and socio-economic constraints; (ii) augmented research capacity, including network-based variety and crop management trials, faster and more comprehensive diagnosis of emerging constraints, timely sharing of new technologies, opportunities to focus research efforts better by linking groups with similar productivity constraints and complementary skills, and greater control of experimental variables in field-based phenotyping; and (iii) increased communication and impacts via more effective dissemination of new ideas and products, the integration of information globally to elicit well-timed local responses to productivity threats, an increased profile, and the publicity of threats to food security. Such outputs would help target the translation of research from the laboratory into the field while bringing the constraints of rural communities closer to the scientific community. The GCIN could provide a lens which academia, science councils, and development agencies could use to focus in on themes of common interest, and working platforms to integrate novel research

  10. Unattended network operations technology assessment study. Technical support for defining advanced satellite systems concepts

    Science.gov (United States)

    Price, Kent M.; Holdridge, Mark; Odubiyi, Jide; Jaworski, Allan; Morgan, Herbert K.

    1991-01-01

    The results are summarized of an unattended network operations technology assessment study for the Space Exploration Initiative (SEI). The scope of the work included: (1) identified possible enhancements due to the proposed Mars communications network; (2) identified network operations on Mars; (3) performed a technology assessment of possible supporting technologies based on current and future approaches to network operations; and (4) developed a plan for the testing and development of these technologies. The most important results obtained are as follows: (1) addition of a third Mars Relay Satellite (MRS) and MRS cross link capabilities will enhance the network's fault tolerance capabilities through improved connectivity; (2) network functions can be divided into the six basic ISO network functional groups; (3) distributed artificial intelligence technologies will augment more traditional network management technologies to form the technological infrastructure of a virtually unattended network; and (4) a great effort is required to bring the current network technology levels for manned space communications up to the level needed for an automated fault tolerance Mars communications network.

  11. Development of a Sensor Network System for Industrial Technology Education

    Science.gov (United States)

    Liu, Chi-Chia; Wu, Din-Wu; Jou, Min; Tsai, Sheng-Jia

    Technology of e-learning has been gradually applied to all kinds of professional teaching fields. However, practicing and operation in real environment cannot be replaced by the method of e-learning such as multimedia and interactive simulations. The present e-learning system has very limited benefit for course of experiment and practical training, especially for the course which requires to experiment in clean room (ex. MEMS). Thus, the quality and quantity of industrial technology education cannot be improved. In order to overcome obstacles of traditional experiment and practical training course and enhance functions of present e-learning system, the study is going to take sensor network technology as foundation to developed web services system. The system is able to present the students 'operation and results right away, thus students can be guided appropriately when they face problems during experiment and practical training. Besides, the system is able to record students' learning process of experiment and practical training. These data of learning process will be helpful for building adaptive u-learning environment for skill-training.

  12. Network on science and technology for the conservation of cultural heritage.

    OpenAIRE

    Sáiz-Jiménez, Cesáreo; Rogerio Candelera, Miguel A.

    2011-01-01

    Electronic Newsletter. CSIC Thematic Network on Cultural Heritage and Network on Science and Technology for the Conservation of Cultural Heritage Instituto de Recursos Naturales y Agrobiología de Sevilla, CSIC, Apartado de Correos 1052, 41080 Sevilla (Spain)

  13. 100G Ethernet in the wild - first experiences

    Science.gov (United States)

    Hoeft, Bruno; Stoy, Robert; Schröder, Frank; Reymund, Aurelie; Niederberger, Ralf; Mextorf, Olaf; Werner, Sabine

    2011-12-01

    A 100 Gigabit Testbed was established in a collaboration of 6 partners. Three industry partners have contributed the fiber infrastructure, the DWDM equipment, as well as the required routers. 447 kilometer was the distance of the wide area testbed established in collaboration with the German NREN DFN between Karlsruhe Institute of Technology and Forschungszentrum Jülich Before starting, DFN assured the quality of the fiber infrastructure, the operation of the DWDM systems at both locations, as well as the connection of the routers to this WAN link with a bandwidth of 100GE. 12*10GE interfaces were available at each site for connecting the local testnodes to the routers. A monitoring and measurement framework was installed for recording the most important IP network performance metrics, among them the One Way Delay (OWD) and its Variation, Packet Loss and Packet Reordering. The delay measurements were conducted between the GPS time synchronized Hades[1]measurement nodes at each location. Additionally all relevant counters at the routers have been recorded using a SNMP based Network Manangement Station and supplemented special command line interface output gathering and parsing scripts. The interfaces statistics were stored in 60 second intervals. The aim of the testbed was to demonstrate a failure-free transmission of one or more IP datastreams over 100GE during the whole period of 4 weeks.This included the evaluation of the 100 Gbit/s optical transmission system, the 100GE interfaces between the routers and the optical system, and the evaluation of a sustained 100GE transmission as well as the evaluation of the use of 100GE in a production like environment. The evaluation included a circulated (in a routing loop) tunable load between 1 and 100 Gbit/s, measurement of transmission quality of TCP and UDP datastreams between the endsystems, measurements of one way latency, a ramping up data transmission from approx. 8 Gbit/s up to 96 Gbit/s.

  14. LOCAL AREA NETWORK MANAGEMENT (Case Study at Assessment and Development Information Technology Units Brawijaya University Malang)

    OpenAIRE

    Hadiwijaya, Mohammad Firman

    2015-01-01

    The purpose of this study was to know the management local area network at Assessment and Development Information Technology units, furthermore this study focusing on network management functions that applied by Assessment and Development Information Technology Units. This study will explain about the implementation of network management functions in the local area network management. The research method employ in this research is by using descriptive qualitative method by study case approach...

  15. Consulting report on the NASA technology utilization network system

    Science.gov (United States)

    Hlava, Marjorie M. K.

    1992-01-01

    The purposes of this consulting effort are: (1) to evaluate the existing management and production procedures and workflow as they each relate to the successful development, utilization, and implementation of the NASA Technology Utilization Network System (TUNS) database; (2) to identify, as requested by the NASA Project Monitor, the strengths, weaknesses, areas of bottlenecking, and previously unaddressed problem areas affecting TUNS; (3) to recommend changes or modifications of existing procedures as necessary in order to effect corrections for the overall benefit of NASA TUNS database production, implementation, and utilization; and (4) to recommend the addition of alternative procedures, routines, and activities that will consolidate and facilitate the production, implementation, and utilization of the NASA TUNS database.

  16. Lipid Processing Technology: Building a Multilevel Modeling Network

    DEFF Research Database (Denmark)

    Díaz Tovar, Carlos Axel; Mustaffa, Azizul Azri; Mukkerikar, Amol

    2011-01-01

    in design and analysis of unit operations; iv) the information and models developed are used as building blocks in the development of methods and tools for computer-aided synthesis and design of process flowsheets (CAFD). The applicability of this methodology is highlighted in each level of modeling through......The aim of this work is to present the development of a computer aided multilevel modeling network for the systematic design and analysis of processes employing lipid technologies. This is achieved by decomposing the problem into four levels of modeling: i) pure component property modeling...... and a lipid-database of collected experimental data from industry and generated data from validated predictive property models, as well as modeling tools for fast adoption-analysis of property prediction models; ii) modeling of phase behavior of relevant lipid mixtures using the UNIFACCI model, development...

  17. Ethernet та промислові мережі реального часу

    OpenAIRE

    Заячук, Я. І.

    2010-01-01

    У статті розглядається питання перспективності використання стандартів Real-Time Ethernet для передачі даних в мережах реального часу. Висвітлено переваги мереж Ethernet перед традиційними польовими шинами, даний огляд основних стандартів RealTime Ethernet, специфіки їх використання, можливостей. The article discusses the prospects of using standard Real-Time Ethernet for data transmission in real-time networks. The advantages of Ethernet over traditional fieldbus, an overview of the basic...

  18. Trends in Energy Management Technology: BCS Integration Technologies - Open Communications Networking

    Energy Technology Data Exchange (ETDEWEB)

    Webster, Tom

    2002-09-18

    Our overall purpose in writing this series of articles is to provide Federal energy managers some basic informational tools to assist their decision making process relative to energy management systems design, specification, procurement, and energy savings potential. Since Federal buildings rely on energy management systems more than their commercial counterparts, it is important for energy practitioners to have a high level of knowledge and understanding of these complex systems. This is the second article in a series and will focus on building control system (BCS) networking fundamentals and an assessment of current approaches to open communications protocols. This is important because networking is a complex subject and the networks form the basic infrastructure for energy management functions and for integrating a wide variety of OEM equipment into a complete EMCIS. The first article [1] covered enabling technologies for emerging energy management systems. Future topics will concentrate on more practical aspects including applications software, product offerings, networking strategies, and case studies of actual installations. Please refer to the first article for a more complete overview of the purpose and background for this series.

  19. Reliable real-time clinical monitoring using sensor network technology.

    Science.gov (United States)

    Chipara, Octav; Brooks, Christopher; Bhattacharya, Sangeeta; Lu, Chenyang; Chamberlain, Roger D; Roman, Gruia-Catalin; Bailey, Thomas C

    2009-11-14

    We propose wireless sensor networks composed of nodes using low-power 802.15.4 radios as an enabling technology for patient monitoring in general hospital wards. A key challenge for such applications is to reliably deliver sensor data from mobile patients. We propose a monitoring system with two types of nodes: patient nodes equipped with wireless pulse oximeters and relays nodes used to route data to a base station. A reliability analysis of data collection from mobile users shows that mobility leads to packet losses exceeding 30%. The majority of packet losses occur between the mobile subjects and the first-hop relays. Based on this insight we developed the Dynamic Relay Association Protocol (DRAP), an effective mechanism for discovering the right relays for patient nodes. DRAP enables highly reliable data collection from mobile subjects. Empirical evaluation showed that DRAP delivered at least 96% of data from multiple users. Our results demonstrate the feasibility of wireless sensor networks for real-time clinical monitoring.

  20. Proceedings of the Workshop on Advanced Network and Technology Concepts for Mobile, Micro, and Personal Communications

    Science.gov (United States)

    Paul, Lori (Editor)

    1991-01-01

    The Workshop on Advanced Network and Technology Concepts for Mobile, Micro, and Personal Communications was held at NASA's JPL Laboratory on 30-31 May 1991. It provided a forum for reviewing the development of advanced network and technology concepts for turn-of-the-century telecommunications. The workshop was organized into three main categories: (1) Satellite-Based Networks (L-band, C-band, Ku-band, and Ka-band); (2) Terrestrial-Based Networks (cellular, CT2, PCN, GSM, and other networks); and (3) Hybrid Satellite/Terrestrial Networks. The proceedings contain presentation papers from each of the above categories.

  1. Inductance optimization of miniature Broadband transformers with racetrack shaped ferrite cores for Ethernet applications

    Science.gov (United States)

    Bowen, David; Krafft, Charles; Mayergoyz, Isaak D.

    2017-05-01

    There is strong commercial interest in the ability to fabricate the windings of traditional miniature wire-wound inductive circuit components, such as Ethernet transformers, lithographically. For greater inductance devices, thick cores are required, making the process of embedding the ferrite material within circuit board one of few options for lithographic winding fabrication. In this paper, a non-traditional core shape, suitable for embedding in circuit board, is examined analytically and experimentally; the racetrack shape is two halves of a toroid connected by straight legs. With regard to the high inductance requirements for Ethernet applications (350μH), the racetrack transformer inductance is analytically optimized, determining the optimal physical dimensions. Two sizes of racetrack-core transformers were fabricated and measured. The measured inductance was in reasonable agreement with the analytical prediction, though large variations in material permeability are expected from the mechanical processing of the ferrite. Some of the experimental transformers were observed to satisfy the Ethernet inductance requirement.

  2. Network security

    CERN Document Server

    Perez, André

    2014-01-01

    This book introduces the security mechanisms deployed in Ethernet, Wireless-Fidelity (Wi-Fi), Internet Protocol (IP) and MultiProtocol Label Switching (MPLS) networks. These mechanisms are grouped throughout the book according to the following four functions: data protection, access control, network isolation, and data monitoring. Data protection is supplied by data confidentiality and integrity control services. Access control is provided by a third-party authentication service. Network isolation is supplied by the Virtual Private Network (VPN) service. Data monitoring consists of applying

  3. Innovation and communicative action: health management networks and technologies.

    Science.gov (United States)

    Rivera, Francisco Javier Uribe; Artmann, Elizabeth

    2016-11-03

    This article discusses elements of a theory of innovation from the perspective of innovation networks and social construction of technology, based on Habermas' Theory of Communicative Action and authors from the Sociology of Innovation. Based on the theoretical framework of the communicative production of scientific facts, we focus on innovation management as a basic dimension that must meet some organizational and methodological requirements in order to power its results. We present and discuss instruments such as Situational Planning, Prospective Analysis, Strategic Portfolio Management, and Networks Management that can help deal with the challenge of innovation and exploration of the future. We conclude that network organizational formats centered on reflexivity of interdisciplinary groups and planning approaches that encourage innovation criteria in assessing the attractiveness of activities and that help anticipate forms of innovation through systematic prospective analysis can potentiate the process of generating innovation as a product of networks. Resumo: No artigo são discutidos elementos de uma teoria da inovação numa perspectiva de redes de inovação e de construção social da tecnologia, a partir da Teoria do Agir Comunicativo de Habermas e de autores da Sociologia da Inovação. Com base no marco teórico da produção comunicativa de fatos científicos, focamos a gestão da inovação como uma dimensão fundamental que deve contemplar alguns requisitos, tanto de natureza organizacional quanto metodológica, para potencializar seus resultados. Apresentamos e discutimos instrumentos como o Planejamento Situacional, a Análise Prospectiva, a Gestão Estratégica de Portfólios e a Gestão de Redes que podem contribuir para o desafio da inovação e exploração do futuro. Conclui-se que formas organizativas em rede, centradas na reflexividade de grupos interdisciplinares, e enfoques de planejamento que estimulem o uso de critérios de inovação na

  4. Heterogeneous Wireless Mesh Network Technology Evaluation for Space Proximity and Surface Applications

    Science.gov (United States)

    DeCristofaro, Michael A.; Lansdowne, Chatwin A.; Schlesinger, Adam M.

    2014-01-01

    NASA has identified standardized wireless mesh networking as a key technology for future human and robotic space exploration. Wireless mesh networks enable rapid deployment, provide coverage in undeveloped regions. Mesh networks are also self-healing, resilient, and extensible, qualities not found in traditional infrastructure-based networks. Mesh networks can offer lower size, weight, and power (SWaP) than overlapped infrastructure-perapplication. To better understand the maturity, characteristics and capability of the technology, we developed an 802.11 mesh network consisting of a combination of heterogeneous commercial off-the-shelf devices and opensource firmware and software packages. Various streaming applications were operated over the mesh network, including voice and video, and performance measurements were made under different operating scenarios. During the testing several issues with the currently implemented mesh network technology were identified and outlined for future work.

  5. Investigations on an environmental technology transfer information network; Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With developing countries (APEC countries) as the main objects, investigations were carried out to issue environmental technology transfer information that Japan has accumulated, and advance exchanges of technical information with persons related inside and outside Japan. As a result of the investigations, it was found that the environmental technology information that serves more effectively for the developing countries is the technical information that has been developed by repeating improvements, has provided actual results in work sites, and is actually used, rather than the state-of-art technologies. Based on this result, business entities having factories and operation centers located in Mie Prefecture and the city of Yokkaichi were asked to provide data for the actually used environmental technologies. Out of 51 items provided by 17 companies, nine items were selected to be used as prototype database materials for an information network. The objects of information sources will be expanded to a nationwide scale in the future to improve the contents of the database. Problems of handling information copyrights and technical know-hows were presented in the course of data collection, urging the necessity of due considerations on the matter. Necessity was indicated on maintenance and management of data base as well as its quantitative expansion. 1 ref., 4 figs.

  6. Bidirectional and simultaneous FTTX/Ethernet services using RSOA based remodulation and polarization multiplexing technique

    Science.gov (United States)

    Das, Anindya S.; Patra, Ardhendu S.

    2015-08-01

    A bidirectional and simultaneous transmission of Ethernet, FTTX services through single optical carrier wavelength employing polarization multiplexing technique in the transmitter end and the user end. 10 Gbps and 2.5 Gbps datarates are transmitted over 50 km single mode fiber employing POLMUX technique at OLT and ONU to provide Ethernet and FTTX services concurrently to the user. Reflective semiconductor optical amplifier is used to reuse and remodulate the downlink signal to uplink transmission. The upstream and the downstream transmission performances are observed by the bit error rate values and the eye diagrams obtained by the BER analyzer.

  7. A Realization of Theoretical Maximum Performance in IPSec on Gigabit Ethernet

    Science.gov (United States)

    Onuki, Atsushi; Takeuchi, Kiyofumi; Inada, Toru; Tokiniwa, Yasuhisa; Ushirozawa, Shinobu

    This paper describes “IPSec(IP Security) VPN system" and how it attains a theoretical maximum performance on Gigabit Ethernet. The Conventional System is implemented by software. However, the system has several bottlenecks which must be overcome to realize a theoretical maximum performance on Gigabit Ethernet. Thus, we newly propose IPSec VPN System with the FPGA(Field Programmable Gate Array) based hardware architecture, which transmits a packet by the pipe-lined flow processing and has 6 parallel structure of encryption and authentication engines. We show that our system attains the theoretical maximum performance in the short packet which is difficult to realize until now.

  8. Broadband Packaging of Photodetectors for 100 Gb/s Ethernet Applications

    DEFF Research Database (Denmark)

    Jiang, Chenhui; Krozer, Viktor; Bach, Heinz-Gunter

    2013-01-01

    The packing structure of functional modules is a major limitaion in achieving a desired performance for 100 Gb/s ethernet applications. This paper presents a methodology of developing advanced packaging of photodetectors (PDs) for high-speed data transmission applications by using 3-D electromagn......The packing structure of functional modules is a major limitaion in achieving a desired performance for 100 Gb/s ethernet applications. This paper presents a methodology of developing advanced packaging of photodetectors (PDs) for high-speed data transmission applications by using 3-D...

  9. US long distance fiber optic networks: Technology, evolution and advanced concepts. Volume 3: Advanced networks and economics

    Science.gov (United States)

    1986-01-01

    This study projects until 2000 the evolution of long distance fiber optic networks in the U.S. Volume 1 is the executive Summary. Volume 2 focuses on fiber optic components and systems that are directly related to the operation of long-haul networks. Optimistic, pessimistic and most likely scenarios of technology development are presented. The activities of national and regional companies implementing fiber long haul networks are also highlighted, along with an analysis of the market and regulatory forces affecting network evolution. Volume 3 presents advanced fiber optic network concept definitions. Inter-LATA traffic is quantified and forms the basis for the construction of 11-, 15-, 17-, and 23-node networks. Using the technology projections from Volume 2, a financial model identifies cost drivers and determines circuit mile costs between any two LATAs. A comparison of fiber optics with alternative transmission concludes the report.

  10. Study on the ultra-high speed LAN corresponding to the ultra-high speed IP network of Kansai Electric Power Co.; LAN no chokosokuka ni kansuru kenkyu. Tosha IP network no chokosokuka eno taio hoho

    Energy Technology Data Exchange (ETDEWEB)

    Ueno, R. [Kansai Electaric Power Co. Inc., Osaka (Japan)

    2000-04-01

    This study was made on survey and evaluation of high-speed network technology and routing protocol based on IP (Internet protocol) network. This paper outlines the evaluation result, and explains the performance verification test result on the routing protocol OSPF (open shortest pass fast) used for the IP network of Kansai Electric Power Co. High-speed LAN using Giga-Bit Ethernet instead of Ethernet was confirmed to be more profitable than ATM-LAN from the viewpoint of cost reduction, operation control, and affinity with the existing IP network. POS (packet over synchronous digital hierarchy) system was adopted as high-speed WAN (wide area network) from the viewpoint of cost reduction, and affinity with the existing IP network. OSPF system was adopted as routing protocol for the next-generation IP network because of its affinity with loop type topology and shorter circuit switching time. The verification test result of OSPF showed such features as short circuit switching time, optimization of a communication route by selecting the widest-band route, and flexible modification of topology. (NEDO)

  11. Research on optical access network remote management technology

    Science.gov (United States)

    Wang, Wayne; Zou, Chen; Luo, Wenyi

    2008-11-01

    This paper goal is to provide a framework for the remote configuration and management of services for PON (Passive Optical Network) access and fiber access. Also it defines how Auto-Configuration Servers (ACS) in the network can remotely configure, troubleshoot and manage a Passive Optical Network (PON) optical network termination (ONT) with layer 3 capabilities using the CPE WAN management protocol, TR-069.

  12. The Positive Role of Social Networks and Social Networking Technology in the Condom-Using Behaviors of Homeless Young People

    National Research Council Canada - National Science Library

    Eric Rice

    2010-01-01

    ...) and how those ties are maintained (face-to-face vs. via social networking technology). Methods. "Ego-centric" social network data were collected from 103 currently sexually active homeless young people aged 16-26 years in Los Angeles, California...

  13. Networking activities in technology-based entrepreneurial teams

    DEFF Research Database (Denmark)

    Neergaard, Helle

    2005-01-01

    Based on social network theoy, this article investigates the distribution of networking roles and responsibilities in entrepreneurial founding teams. Its focus is on the team as a collection of individuals, thus allowing the research to address differences in networking patterns. It identifies six...... central networking activities and shows that not all founding team members are equally active 'networkers'. The analyses show that team members prioritize different networking activities and that one member in particular has extensive networking activities whereas other memebrs of the team are more...

  14. Evaluation of Network Failure induced IPTV degradation in Metro Networks

    DEFF Research Database (Denmark)

    Wessing, Henrik; Berger, Michael Stübert; Yu, Hao

    2009-01-01

    In this paper, we evaluate future network services and classify them according to their network requirements. IPTV is used as candidate service to evaluate the performance of Carrier Ethernet OAM update mechanisms and requirements. The latter is done through quality measurements using MDI...... and subjective evaluations. It is concluded that OAM interval close to 10 ms is a suitable choice for service providers....

  15. Adoption of Superior Technology in Markets with Heterogeneous Network Externalities and Price Competition

    NARCIS (Netherlands)

    M.C.W. Janssen (Maarten); E. Mendys

    2000-01-01

    textabstractIn this paper we investigate whether markets with heterogeneous network externalities can be locked-in by old technologies even if superior technologies are available. Heterogeneous network externalities are present when some consumers care more about the size of the market share of a

  16. From birth through transition to maturation : The evolution of technology-based alliance networks

    NARCIS (Netherlands)

    Gilsing, Victor; Cloodt, M.; Roijakkers, N.

    2016-01-01

    This article considers the evolution of interfirm networks within a context of technological change. More specifically, it studies the evolution of structural and positional embeddedness in a network of technology-based alliances when it moves from an early period of invention creation to a

  17. Factors Impacting Adult Learner Achievement in a Technology Certificate Program on Computer Networks

    Science.gov (United States)

    Delialioglu, Omer; Cakir, Hasan; Bichelmeyer, Barbara A.; Dennis, Alan R.; Duffy, Thomas M.

    2010-01-01

    This study investigates the factors impacting the achievement of adult learners in a technology certificate program on computer networks. We studied 2442 participants in 256 institutions. The participants were older than age 18 and were enrolled in the Cisco Certified Network Associate (CCNA) technology training program as "non-degree" or…

  18. Optical technologies in extended-reach access networks

    DEFF Research Database (Denmark)

    Wong, Elaine; Amaya Fernández, Ferney Orlando; Tafur Monroy, Idelfonso

    2009-01-01

    The merging of access and metro networks has been proposed as a solution to lower the unit cost of customer bandwidth. This paper reviews some of the recent advances and challenges in extended-reach optical access networks....

  19. 71 Network Gateway Technology: The Issue of Redundancy towards ...

    African Journals Online (AJOL)

    User

    2012-01-24

    Jan 24, 2012 ... is an open source standard. The major network devices used in network gateway redundancy configuration are the routers and multilayer switches. They are used as active and backup devices depending on the type of network topology. Whenever the active gateway fails, in the event of hardware failure,.

  20. GSM Network Traffic Analysis | Ani | Nigerian Journal of Technology

    African Journals Online (AJOL)

    GSM networks are traffic intensive specifically the signaling traffic. Evolvement of effective and efficient performance management strategy requires accurate quantification of network signaling traffic volume along side with the user traffic volume. Inaccurate quantification may lead to serious network traffic congestion and ...

  1. Wireless Communications and Networking Technologies for Smart Grid: Paradigms and Challenges

    OpenAIRE

    Fang, Xi; Yang, Dejun; Xue, Guoliang

    2011-01-01

    Smart grid, regarded as the next generation power grid, uses two-way flows of electricity and information to create a widely distributed automated energy delivery network. In this work we present our vision on smart grid from the perspective of wireless communications and networking technologies. We present wireless communication and networking paradigms for four typical scenarios in the future smart grid and also point out the research challenges of the wireless communication and networking ...

  2. Advancements in mobile positioning technologies and mobile location networks

    Science.gov (United States)

    Kong, Seung Hyun

    Mobile positioning technologies that utilize measurements of wireless communication signals are one of the most interesting topics in mobile communication systems today. In CDMA or WCDMA based mobile communication systems, hearability is one of the most critical and practical challenges to using its wireless communication signals for positioning. Also, in practice, the repeater systems widely used for cell enhancement or covering shadowed areas in urban environments often cause hearability problem and accuracy degradation. Therefore, solving hearability problem is a pre-requisite to building a reliable mobile positioning system. This thesis investigates the major causes of the hearability problem and proposes solution based on the thorough analysis of mobile communication system and field test results. To understand the hearability problem, the Pilot channel searcher function in the CDMA mobile station is analyzed with its receiver operating characteristics (ROC) obtained from simulations considering practical error sources. Using knowledge of Pilot channel search performance at the mobile station, hearability is tested within a cell area where hexagonal cell geometry and practical sectorization effect is assumed. An angle of departure (AOD) estimation scheme of the forward link signal utilizing the radiation gain patterns of sector antennas with a range measurement scheme defined in IS-95 or UMTS is proposed as a solution to the hearability problem at the inner cell area. The performance of the proposed AOD estimation scheme is shown with field test results. Since the Pilot channel measurement at the mobile station is obtained from the measurement of the detected and resolvable earliest arrival paths for the purpose of positioning, statistical properties of the detected and resolvable earliest arrival paths and the AODs of detected and resolvable earliest arrival paths are analyzed and described before introducing the AOD field experiments. Widely used cellular

  3. [Advances in sensor node and wireless communication technology of body sensor network].

    Science.gov (United States)

    Lin, Weibing; Lei, Sheng; Wei, Caihong; Li, Chunxiang; Wang, Cang

    2012-06-01

    With the development of the wireless communication technology, implantable biosensor technology, and embedded system technology, Body Sensor Network (BSN) as one branch of wireless sensor networks and important part of the Internet of things has caught more attention of researchers and enterprises. This paper offers the basic concept of the BSN and analyses the related research. We focus on sensor node and wireless communication technology from perspectives of technology challenges, research advance and development trend in the paper. Besides, we also present a relative overview of domestic and overseas projects for the BSN.

  4. Portable Computer Technology (PCT) Research and Development Program Phase 2

    Science.gov (United States)

    Castillo, Michael; McGuire, Kenyon; Sorgi, Alan

    1995-01-01

    The subject of this project report, focused on: (1) Design and development of two Advanced Portable Workstation 2 (APW 2) units. These units incorporate advanced technology features such as a low power Pentium processor, a high resolution color display, National Television Standards Committee (NTSC) video handling capabilities, a Personal Computer Memory Card International Association (PCMCIA) interface, and Small Computer System Interface (SCSI) and ethernet interfaces. (2) Use these units to integrate and demonstrate advanced wireless network and portable video capabilities. (3) Qualification of the APW 2 systems for use in specific experiments aboard the Mir Space Station. A major objective of the PCT Phase 2 program was to help guide future choices in computing platforms and techniques for meeting National Aeronautics and Space Administration (NASA) mission objectives. The focus being on the development of optimal configurations of computing hardware, software applications, and network technologies for use on NASA missions.

  5. Cloud RAN for Mobile Networks - a Technology Overview

    DEFF Research Database (Denmark)

    Checko, Aleksandra; Christiansen, Henrik Lehrmann; Yan, Ying

    2014-01-01

    Pool for statistical multiplexing gain, while shifting the burden to the high-speed wireline transmission of In-phase and Quadrature (IQ) data. C-RAN enables energy efficient network operation and possible cost savings on base- band resources. Furthermore, it improves network capacity by performing...

  6. Networking: a catalyst in science and technological research ...

    African Journals Online (AJOL)

    This research focuses on the network of networks access, usage, and productivity by the research scientists of Federal Institute of Industrial Research, Oshodi Lagos. Data was gathered through the use of questionnaire randomly administered to 100 research scientists in two phases. The phases were before and after the ...

  7. Technologies for all-optical wavelength conversion in DWDM networks

    DEFF Research Database (Denmark)

    Wolfson, David; Fjelde, Tina; Kloch, Allan

    2001-01-01

    Different techniques for all-optical wavelength conversion are reviewed and the advantages and disadvantages seen from a system perspective are highlighted. All-optical wavelength conversion will play a major role in making cost-effective network nodes in future high-speed WDM networks, where fun...

  8. A Rural Next Generation Network (R-NGN and Its Testbed

    Directory of Open Access Journals (Sweden)

    Armein Z. R. Langi

    2013-09-01

    Full Text Available Rural Next Generation Networks (R-NGN technology allows Internet protocol (IP based systems to be used in rural areas. This paper reports a testbed of R-NGN that uses low cost Ethernet radio links, combined with media gateways and a softswitch. The network consists of point-to-point IP Ethernet 2.4 GHz wireless link, IP switches and gateways in each community, standard copper wires and telephone sets for users. It uses low power consumption, and suitable for low density users. This combination allows low cost systems as well as multiservices (voice, data, and multimedia for rural communications. An infrastructure has been deployed in two communities in Cipicung Girang, a village 10 km outside Bandung city, Indonesia. Two towers link the communities with a network of Institut Teknologi Bandung (ITB campus. In addition, local wirelines connect community houses to the network. Currently there are four houses connected to each community node (for a total of eight house, upon which we can perform various tests and measurements.

  9. A Rural Next Generation Network (R-NGN and Its Testbed

    Directory of Open Access Journals (Sweden)

    Armein Z. R. Langi

    2007-05-01

    Full Text Available Rural Next Generation Networks (R-NGN technology allows Internet protocol (IP based systems to be used in rural areas. This paper reports a testbed of R-NGN that uses low cost Ethernet radio links, combined with media gateways and a softswitch. The network consists of point-to-point IP Ethernet 2.4 GHz wireless link, IP switches and gateways in each community, standard copper wires and telephone sets for users. It uses low power consumption, and suitable for low density users. This combination allows low cost systems as well as multiservices (voice, data, and multimedia for rural communications. An infrastructure has been deployed in two communities in Cipicung Girang, a village 10 km outside Bandung city, Indonesia. Two towers link the communities with a network of Institut Teknologi Bandung (ITB campus. In addition, local wirelines connect community houses to the network. Currently there are four houses connected to each community node (for a total of eight house, upon which we can perform various tests and measurements.

  10. Performance analysis of communication links based on VCSEL and silicon photonics technology for high-capacity data-intensive scenario.

    Science.gov (United States)

    Boletti, A; Boffi, P; Martelli, P; Ferrario, M; Martinelli, M

    2015-01-26

    To face the increased demand for bandwidth, cost-effectiveness and simplicity of future Ethernet data communications, a comparison between two different solutions based on directly-modulated VCSEL sources and Silicon Photonics technologies is carried out. Also by exploiting 4-PAM modulation, the transmission of 50-Gb/s and beyond capacity per channel is analyzed by means of BER performance. Applications for optical backplane, very short reach and in case of client-optics networks and intra and inter massive data centers communications (up to 10 km) are taken into account. A comparative analysis based on the power consumption is also proposed.

  11. Policy based network management : state of the industry and desired functionality for the enterprise network: security policy / testing technology evaluation.

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, Christine A.; Ernest, Martha J.; Tolendino, Lawrence F.; Klaus, Edward J.; MacAlpine, Timothy L.; Rios, Michael A.; Keliiaa, Curtis M.; Taylor, Jeffrey L.

    2005-02-01

    Policy-based network management (PBNM) uses policy-driven automation to manage complex enterprise and service provider networks. Such management is strongly supported by industry standards, state of the art technologies and vendor product offerings. We present a case for the use of PBNM and related technologies for end-to-end service delivery. We provide a definition of PBNM terms, a discussion of how such management should function and the current state of the industry. We include recommendations for continued work that would allow for PBNM to be put in place over the next five years in the unclassified environment.

  12. NETWORK-CENTRIC TECHNOLOGIES FOR CONTROL OF THREE-PHASE NETWORK OPERATION MODES

    Directory of Open Access Journals (Sweden)

    Ye. I. Sokol

    2017-06-01

    Full Text Available Purpose. The development of the control system for three-phase network is based on intelligent technologies of network-centric control of heterogeneous objects. The introduction of unmanned aerial vehicles for monitoring of three-phase network increases the efficiency of management. Methodology. The case of decomposition of the instantaneous capacities of the fixed and variable components for 3-wire system. The features of power balance for the different modes of its functioning. It should be noted that symmetric sinusoidal mode is balanced and good, but really unbalanced, if the standard reactive power is not zero. To solve the problem of compensation is sufficient knowledge of the total value of the inactive components of full power (value of the inactive power without detail. The creation of a methodology of measurement and assessment will require knowledge of the magnitudes of each inactive component separately, which leads to the development of a unified approach to the measurement and compensation of inactive components of full power and the development of a generalized theory of power. Results. Procedure for the compensation of the current of zero sequence excludes from circuit the source, as the active component of instantaneous power of zero sequence, and a vector due to a current of zero sequence. This procedure is performed without time delay as it does not require integration. Only a 3–wire system with symmetrical voltage eliminates pulsations and symmetrization of the equivalent conductances of the phases of the task. Under asymmetric voltage, the power is different, its analysis requires the creation of a vector mathematical model of the energy processes of asymmetrical modes of 3–phase systems. Originality. The proposed method extends the basis of the vector method for any zero sequence voltages and shows that the various theories of instantaneous power three wired scheme due to the choice of a basis in a two

  13. Exploring Social Networking Technologies as Tools for HIV Prevention for Men Who Have Sex With Men.

    Science.gov (United States)

    Ramallo, Jorge; Kidder, Thomas; Albritton, Tashuna; Blick, Gary; Pachankis, John; Grandelski, Valen; Grandeleski, Valen; Kershaw, Trace

    2015-08-01

    Social networking technologies are influential among men who have sex with men (MSM) and may be an important strategy for HIV prevention. We conducted focus groups with HIV positive and negative participants. Almost all participants used social networking sites to meet new friends and sexual partners. The main obstacle to effective HIV prevention campaigns in social networking platforms was stigmatization based on homosexuality as well as HIV status. Persistent stigma associated with HIV status and disclosure was cited as a top reason for avoiding HIV-related conversations while meeting new partners using social technologies. Further, social networking sites have different social etiquettes and rules that may increase HIV risk by discouraging HIV status disclosure. Overall, successful interventions for MSM using social networking technologies must consider aspects of privacy, stigma, and social norms in order to enact HIV reduction among MSM.

  14. Discussion on the Technology and Method of Computer Network Security Management

    Science.gov (United States)

    Zhou, Jianlei

    2017-09-01

    With the rapid development of information technology, the application of computer network technology has penetrated all aspects of society, changed people's way of life work to a certain extent, brought great convenience to people. But computer network technology is not a panacea, it can promote the function of social development, but also can cause damage to the community and the country. Due to computer network’ openness, easiness of sharing and other characteristics, it had a very negative impact on the computer network security, especially the loopholes in the technical aspects can cause damage on the network information. Based on this, this paper will do a brief analysis on the computer network security management problems and security measures.

  15. Aeronautical Satellite-Assisted Process for Information Exchange Through Network Technologies (Aero-SAPIENT) Conducted

    Science.gov (United States)

    Zernic, Michael J.

    2002-01-01

    Broadband satellite communications for aeronautics marries communication and network technologies to address NASA's goals in information technology base research and development, thereby serving the safety and capacity needs of the National Airspace System. This marriage of technology increases the interactivity between airborne vehicles and ground systems. It improves decision-making and efficiency, reduces operation costs, and improves the safety and capacity of the National Airspace System. To this end, a collaborative project called the Aeronautical Satellite Assisted Process for Information Exchange through Network Technologies, or Aero-SAPIENT, was conducted out of Tinker AFB, Oklahoma, during November and December 2000.

  16. Patent Network Analysis and Quadratic Assignment Procedures to Identify the Convergence of Robot Technologies.

    Directory of Open Access Journals (Sweden)

    Woo Jin Lee

    Full Text Available Because of the remarkable developments in robotics in recent years, technological convergence has been active in this area. We focused on finding patterns of convergence within robot technology using network analysis of patents in both the USPTO and KIPO. To identify the variables that affect convergence, we used quadratic assignment procedures (QAP. From our analysis, we observed the patent network ecology related to convergence and found technologies that have great potential to converge with other robotics technologies. The results of our study are expected to contribute to setting up convergence based R&D policies for robotics, which can lead new innovation.

  17. Networking and Information Technology Research and Development. Supplement of the President's Budget for Fiscal Year 2006

    National Research Council Canada - National Science Library

    2005-01-01

    This Supplement to the President's Budget for Fiscal Year 2006 offers a brief technical outline of the 2006 budget request for the Networking and Information Technology Research and Development (NITRD) Program...

  18. Autonomous Distributed Systems. Multiple-Level Distributed Data Fusion for Future DADS Using Bayesian Network Technology

    National Research Council Canada - National Science Library

    Mori, Shozo

    2002-01-01

    ... Network Technology -, during the period from 1 July 2001 to 15 January 2002. The future DADS, also known as mini-DADS or micro-DADS, is the next-generation DADS envisioned for 2020 littoral undersea threats...

  19. Grand Challenges: Science, Engineering, and Societal Advances, Requiring Networking and Information Technology Research and Development

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — ...the U.S. Government makes critical decisions about appropriate investments in IT R and D to help society forward both socially and economically. To inform that...

  20. Flink: Semantic Web technology for the extraction and analysis of social networks

    NARCIS (Netherlands)

    Mika, P.

    2005-01-01

    We present the Flink system for the extraction, aggregation and visualization of online social networks. Flink employs semantic technology for reasoning with personal information extracted from a number of electronic information sources including web pages, emails, publication archives and FOAF

  1. A Co-Citation Network of Young Children's Learning with Technology

    National Research Council Canada - National Science Library

    Kai-Yu Tang; Ming-Chaun Li; Ching-Ting Hsin; Chin-Chung Tsai

    2016-01-01

      This paper used a novel literature review approach--co-citation network analysis--to illuminate the latent structure of 87 empirical papers in the field of young children's learning with technology (YCLT...

  2. Enabling Research Network Connectivity to Clouds with Virtual Router Technology

    Science.gov (United States)

    Seuster, R.; Casteels, K.; Leavett-Brown, CR; Paterson, M.; Sobie, RJ

    2017-10-01

    The use of opportunistic cloud resources by HEP experiments has significantly increased over the past few years. Clouds that are owned or managed by the HEP community are connected to the LHCONE network or the research network with global access to HEP computing resources. Private clouds, such as those supported by non-HEP research funds are generally connected to the international research network; however, commercial clouds are either not connected to the research network or only connect to research sites within their national boundaries. Since research network connectivity is a requirement for HEP applications, we need to find a solution that provides a high-speed connection. We are studying a solution with a virtual router that will address the use case when a commercial cloud has research network connectivity in a limited region. In this situation, we host a virtual router in our HEP site and require that all traffic from the commercial site transit through the virtual router. Although this may increase the network path and also the load on the HEP site, it is a workable solution that would enable the use of the remote cloud for low I/O applications. We are exploring some simple open-source solutions. In this paper, we present the results of our studies and how it will benefit our use of private and public clouds for HEP computing.

  3. Design of Networked Home Automation System Based on μCOS-II and AMAZON

    Directory of Open Access Journals (Sweden)

    Liu Jianfeng

    2015-01-01

    Full Text Available In recent years, with the popularity of computers and smart phones and the development of intelligent building in electronics industry, people’s requirement of living environment is gradually changing. The intelligent home furnishing building has become the new focus of people purchasing. And the networked home automation system which relies on the advanced network technology to connect with air conditioning, lighting, security, curtains, TV, water heater and other home furnishing systems into a local area network becomes a networked control system. μC /OS is a real-time operating system with the free open-source code, the compact structure and the preemptive real-time kernel. In this paper, the author focuses on the design of home furnishing total controller based on AMAZON multimedia processor and μC/OS-II real-time operating system, and achieves the remote access connection and control through the Ethernet.

  4. Handbook of sensor networking advanced technologies and applications

    CERN Document Server

    Vacca, John R

    2015-01-01

    ""John R. Vacca has been a forward thinker in how omnipotent networks will work and envisioned many types of devices and functions that can be networked. His work in these areas is unsurpassed by other writers and visionaries.In this book, John has pulled together the knowledge that is needed for managers and developers to keep moving forward, and to do so faster, with sensor networking machines and devices that can perform both the mundane and complex tasks that are required for process management and production, which is necessary to propel enterprises and thus drive the global econom

  5. Network technologies as innovative solution in commodity circulation

    Directory of Open Access Journals (Sweden)

    Krasyuk I.A.

    2017-01-01

    Full Text Available The paper identifies the specific features of innovations in the trade industry. Innovations, created in other industries, are preferably used in the area of trade. The types of innovations in the field of trade have been specified. The establishment of a networking commercial enterprise has been defined as an innovative solution, widely used in Russian and world practice. The current state of network trade has been investigated and the tendency of retail network expanding in the Russian Federation has been discovered. The concept of a multi-format establishment and the most perspective trade formats have been identified based on the example trading company X5 RetailGroup.

  6. Fractured reservoir discrete feature network technologies. Final report, March 7, 1996 to September 30, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Dershowitz, William S.; Einstein, Herbert H.; LaPoint, Paul R.; Eiben, Thorsten; Wadleigh, Eugene; Ivanova, Violeta

    1998-12-01

    This report summarizes research conducted for the Fractured Reservoir Discrete Feature Network Technologies Project. The five areas studied are development of hierarchical fracture models; fractured reservoir compartmentalization, block size, and tributary volume analysis; development and demonstration of fractured reservoir discrete feature data analysis tools; development of tools for data integration and reservoir simulation through application of discrete feature network technologies for tertiary oil production; quantitative evaluation of the economic value of this analysis approach.

  7. Usability and use reference in the social network facebook: a netnographic analysis of technological users

    OpenAIRE

    Naiara Silva Ferreira; Emílio José Montero Arruda Filho

    2015-01-01

    This article presents a study about the preference of use in virtual social networks, using Facebook as object of study, to identify the motivational factors for the usability of this technology platform. The social network Facebook has been chosen to present a technological scenario of high sociability and virtual interaction. The methodology used was the netnography, being made through the collection of discussions in North American sites of news and forums online, where there is a large cr...

  8. Network Computer Technology. Phase I: Viability and Promise within NASA's Desktop Computing Environment

    Science.gov (United States)

    Paluzzi, Peter; Miller, Rosalind; Kurihara, West; Eskey, Megan

    1998-01-01

    Over the past several months, major industry vendors have made a business case for the network computer as a win-win solution toward lowering total cost of ownership. This report provides results from Phase I of the Ames Research Center network computer evaluation project. It identifies factors to be considered for determining cost of ownership; further, it examines where, when, and how network computer technology might fit in NASA's desktop computing architecture.

  9. ANALYSES the application of multimedia and network technology in College English Teaching

    OpenAIRE

    Teng Chun Yan

    2016-01-01

    with the development of the times and scientific progress, multimedia and network has been widely used in College English teaching. This paper analyzes the advantages of network and multimedia technology in College English teaching practice, and puts forward that teachers should use network teaching method in College English teaching, to enhance the efficiency of English learning and students' English ability and improve the quality of College English teaching.

  10. Logical optical line terminal technologies towards flexible and highly reliable metro- and access-integrated networks

    Science.gov (United States)

    Okamoto, Satoru; Sato, Takehiro; Yamanaka, Naoaki

    2017-01-01

    In this paper, flexible and highly reliable metro and access integrated networks with network virtualization and software defined networking technologies will be presented. Logical optical line terminal (L-OLT) technologies and active optical distribution networks (ODNs) are the key to introduce flexibility and high reliability into the metro and access integrated networks. In the Elastic Lambda Aggregation Network (EλAN) project which was started in 2012, a concept of the programmable optical line terminal (P-OLT) has been proposed. A role of the P-OLT is providing multiple network services that have different protocols and quality of service requirements by single OLT box. Accommodated services will be Internet access, mobile front-haul/back-haul, data-center access, and leased line. L-OLTs are configured within the P-OLT box to support the functions required for each network service. Multiple P-OLTs and programmable optical network units (P-ONUs) are connected by the active ODN. Optical access paths which have flexible capacity are set on the ODN to provide network services from L-OLT to logical ONUs (L-ONUs). The L-OLT to L-ONU path on the active ODN provides a logical connection. Therefore, introducing virtualization technologies becomes possible. One example is moving an L-OLT from one P-OLT to another P-OLT like a virtual machine. This movement is called L-OLT migration. The L-OLT migration provides flexible and reliable network functions such as energy saving by aggregating L-OLTs to a limited number of P-OLTs, and network wide optical access path restoration. Other L-OLT virtualization technologies and experimental results will be also discussed in the paper.

  11. First meeting of the network of science and technology for the conservation of cultural heritage (Technoheritage).

    OpenAIRE

    Rogerio Candelera, Miguel A.

    2011-01-01

    2 pages, 2 figures, 1 reference. Electronic Newsletter. CSIC Thematic Network on Cultural Heritage and Network on Science and Technology for the Conservation of Cultural Heritage Instituto de Recursos Naturales y Agrobiología de Sevilla, CSIC, Apartado de Correos 1052, 41080 Sevilla (Spain). More information: http://www.biotec.boku.ac.at/14837.html

  12. Technologies That Support Marketing and Market Development in SMEs—Evidence from Social Networks

    NARCIS (Netherlands)

    Eggers, Fabian; Hatak, Isabella; Kraus, Sascha; Niemand, Thomas

    2017-01-01

    This study builds on previous research on information technology implementation and usage in small and medium-sized enterprises (SMEs) and applies a special focus on social networks. Specifically, this research investigates antecedents of social network usage in SMEs and respective performance

  13. An experimental study of cross-technology interference in in-vehicle wireless sensor networks

    NARCIS (Netherlands)

    Tavakoli, R.; Nabi, M.; Basten, T.; Goossens, K.

    2016-01-01

    Wireless in-vehicle networks are considered as a flexible and cost-efficient solution for the new generation of cars. One of the candidate wireless technologies for these wireless sensor networks is the IEEE 802.15.4 standard which operates in the 2.4 GHz ISM band. This is while the number of

  14. Success Factors and Challenges of an Information Communication Technology Network in Rural Schools

    Science.gov (United States)

    Mihai, Maryke A.

    2017-01-01

    In April 2008, an interactive information communication technology (ICT) network was established in Mpumalanga, South Africa. the network involved the implementation of SMART board interactive whiteboards (IWBs) and collaboration between a leading school and several disadvantaged schools. the main purpose of the Mpumalanga IWB project was to reach…

  15. The role of social networks in financing technology-based ventures: an empirical exploration

    NARCIS (Netherlands)

    Heuven, J.M.J.; Groen, Arend J.

    2012-01-01

    The focus of this study is on the role of networks in both identifying and accessing financial resource providers by technology-based ventures. We explore the role of networks by taking into account several specifications. We (1) acknowledge that new ventures can access financial resource providers

  16. Synchronization and NRZ-to-RZ format conversion of 10 G Ethernet packet based on a time lens

    DEFF Research Database (Denmark)

    Hu, Hao; Laguardia Areal, Janaina; Palushani, Evarist

    2010-01-01

    10 G Ethernet packet with maximum frame size of 1518 bytes is synchronized to a global clock using a time lens. The 10 Gb/s NRZ signal is converted into RZ signal at the same time.......10 G Ethernet packet with maximum frame size of 1518 bytes is synchronized to a global clock using a time lens. The 10 Gb/s NRZ signal is converted into RZ signal at the same time....

  17. Link layer topology discovery in an uncooperative ethernet environment

    CSIR Research Space (South Africa)

    Delport, JP

    2007-05-01

    Full Text Available of Pretoria etd - Delport, J P (2007) Table of Contents iii Table of Contents Abstract i List of Figures viii 1 Overview and Objectives 1 1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Problem Statement... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 5 Internal Network Device Discovery 49 5.1 Introduction and Overview . . . . . . . . . . . . . . . . . . . . 49 5.2 Experiment Design and Preparation . . . . . . . . . . . . . . . 50 5.2.1 Motivation...

  18. SISTEM MONITOR DAN KENDALI RUANG SERVER DENGAN EMBEDDED ETHERNET

    OpenAIRE

    A.A. Ketut Agung Cahyawan W

    2012-01-01

    Selama ini seorang network administrator harus berada pada ruang server jika ingin menyalakan server yang ada disana, atau memeriksa apakah temperatur ruang server sudah cukup agak server dapat bekerja optimal. Permasalahan timbul karena ruang server biasanya terletak cukup jauh dan harus selalu terkunci demi alasan keamanan. Pada penelitian ini dirancang suatu sistem kendali dan monitor yang dapat menyalakan server dari jarak jauh sekaligus memantau suhu ruangan server, menaikkan atau menuru...

  19. 71 Network Gateway Technology: The Issue of Redundancy towards ...

    African Journals Online (AJOL)

    User

    2012-01-24

    . Network gateway ... Two important components are the transmission media, that carry the computers signals, typically on ... devices such as personal computers or servers can function as a gateway. However, a computer ...

  20. Network Technologies for Networked Terrorists: Assessing the Value of Information and Communication Technologies to Modern Terrorist Organizations

    National Research Council Canada - National Science Library

    Don, Bruce; Frelinger, Dave; Gerwehr, Scott; Landree, Eric; Jackson, Brian

    2007-01-01

    .... This book explores the role that these communications and computer technologies play and the net effect of their use, the purpose and manner in which the technology is used, the operational actions...

  1. Local area networks an introduction to the technology

    CERN Document Server

    McNamara, John E

    1985-01-01

    This concise book provides an objective introduction to local area networks - how they work, what they do, and how you can benefit from them. It outlines the pros and cons of the most common configurations so you can evaluate them in light of your own needs. You'll also learn about network software, with special emphasis on the ISO layered model of communications protocols.

  2. Integration of VICbus, FDL, SCI and Ethernet in the CERN CASCADE data acquisition system

    CERN Document Server

    Petersen, J; Bogaerts, A; Burckhart, Doris; Divià, R; Ingebritsen, L; Joos, M; Liebhart, M; Niewold, J; Parkman, C; Perrin, Yves; Thiercelin, B; Tremblet, L J; Vascotto, Alessandro; Werner, P

    1995-01-01

    Cascade is a multi-processor real-time data-acquisition system for HEP experiments developed at CERN by the ECP-DS group. Configurations supported today include VMEbus processors running OS-9 and UNIX workstations. The CASCADE data acquisition processes, called stages communicate via links, at present VICbus between VME crates and Ethernet between VMEbus processors and workstations. Work is in progress to introduce new inter-stage links based on the Fast Data Link between VME crates and on SCI for data exchange between SUN stations. The paper gives a short description of the architecture of CASCADE with emphasis on the link aspects. The implementation and current status of the inter-stage links based on VICbus, Ethernet, FDI, and SCI will be described and results on the performances presented.

  3. Network Patch Cables Demystified: A Super Activity for Computer Networking Technology

    Science.gov (United States)

    Brown, Douglas L.

    2004-01-01

    This article de-mystifies network patch cable secrets so that people can connect their computers and transfer those pesky files--without screaming at the cables. It describes a network cabling activity that can offer students a great hands-on opportunity for working with the tools, techniques, and media used in computer networking. Since the…

  4. Developing a New HSR Switching Node (SwitchBox for Improving Traffic Performance in HSR Networks

    Directory of Open Access Journals (Sweden)

    Nguyen Xuan Tien

    2016-01-01

    Full Text Available High availability is crucial for industrial Ethernet networks as well as Ethernet-based control systems such as automation networks and substation automation systems (SAS. Since standard Ethernet does not support fault tolerance capability, the high availability of Ethernet networks can be increased by using redundancy protocols. Various redundancy protocols for Ethernet networks have been developed and standardized, such as rapid spanning tree protocol (RSTP, media redundancy protocol (MRP, parallel redundancy protocol (PRP, high-availability seamless redundancy (HSR and others. RSTP and MRP have switchover delay drawbacks. PRP provides zero recovery time, but requires a duplicate network infrastructure. HSR operation is similar to PRP, but HSR uses a single network. However, the standard HSR protocol is mainly applied to ring-based topologies and generates excessively unnecessary redundant traffic in the network. In this paper, we develop a new switching node for the HSR protocol, called SwitchBox, which is used in HSR networks in order to support any network topology and significantly reduce redundant network traffic, including unicast, multicast and broadcast traffic, compared with standard HSR. By using the SwitchBox, HSR not only provides seamless communications with zero switchover time in case of failure, but it is also easily applied to any network topology and significantly reduces unnecessary redundant traffic in HSR networks.

  5. Advice Networks and Local Diffusion of Technological Innovations

    Science.gov (United States)

    Barahona, Juan Carlos; Pentland, Alex Sandy

    Classical writers such as John Stuart Mill and Karl Marx speculated that the standard of living could not rise indefinitely unless advances in technology increased the yield of the means of production. Neoclassical growth theory, based on capital accumulation, supports this intuition [1]. Digital tools increase personal productivity. Communication technologies enhance the coordination among individuals and increase the efficacy and efficiency of collective efforts. In both ways, technology contributes with wealth creation and the overall welfare of the community.

  6. An Ethernet LAN based distributed generation system load shedding strategy

    DEFF Research Database (Denmark)

    Wei, Mu; Chen, Zhe

    2011-01-01

    This paper firstly analyzes and compares various communication technologies, and proposes a communication system for a distributed generation system (DGS) with wind turbines. Then the paper presents a novel simulation method of considering the interactions between the communication system and pow...

  7. Design of a of a survivable multi-wavelength photonic access network

    NARCIS (Netherlands)

    Roy, R.; van Etten, Wim

    2007-01-01

    This paper investigates the design of protection schemes in an extended access network. The network is modeled as a stack of quasi independent logical passive optical networks(PONs), each operating the IEEE Ethernet passive optical networks (EPON) protocol. The dynamics of the network operation when

  8. Simulation technologies in networking and communications selecting the best tool for the test

    CERN Document Server

    Pathan, Al-Sakib Khan; Khan, Shafiullah

    2014-01-01

    Simulation is a widely used mechanism for validating the theoretical models of networking and communication systems. Although the claims made based on simulations are considered to be reliable, how reliable they really are is best determined with real-world implementation trials.Simulation Technologies in Networking and Communications: Selecting the Best Tool for the Test addresses the spectrum of issues regarding the different mechanisms related to simulation technologies in networking and communications fields. Focusing on the practice of simulation testing instead of the theory, it presents

  9. Identifying gaps in grid middleware on fast networks with the advanced networking initiative

    Energy Technology Data Exchange (ETDEWEB)

    Dykstra, Dave [Fermilab; Garzoglio, Gabriele [Fermilab; Kim, Hyunwoo [Fermilab; Mhashilkar, Parag [Fermilab

    2012-01-01

    As of 2012, a number of US Department of Energy (DOE) National Laboratories have access to a 100 Gb/s wide-area network backbone. The ESnet Advanced Networking Initiative (ANI) project is intended to develop a prototype network, based on emerging 100 Gb/s Ethernet technology. The ANI network will support DOE's science research programs. A 100 Gb/s network test bed is a key component of the ANI project. The test bed offers the opportunity for early evaluation of 100Gb/s network infrastructure for supporting the high impact data movement typical of science collaborations and experiments. In order to make effective use of this advanced infrastructure, the applications and middleware currently used by the distributed computing systems of large-scale science need to be adapted and tested within the new environment, with gaps in functionality identified and corrected. As a user of the ANI test bed, Fermilab aims to study the issues related to end-to-end integration and use of 100 Gb/s networks for the event simulation and analysis applications of physics experiments. In this paper we discuss our findings from evaluating existing HEP Physics middleware and application components, including GridFTP, Globus Online, etc. in the high-speed environment. These will include possible recommendations to the system administrators, application and middleware developers on changes that would make production use of the 100 Gb/s networks, including data storage, caching and wide area access.

  10. Social network analysis for technology-enhanced learning: review and future directions

    NARCIS (Netherlands)

    Sie, Rory; Ullmann, Thomas; Rajagopal, Kamakshi; Cela, Karina; Bitter-Rijpkema, Marlies; Sloep, Peter

    2013-01-01

    Sie, R. L. L., Ullmann, T. D., Rajagopal, K., Cela, K., Bitter-Rijpkema, M., & Sloep, P. B. (2012). Social network analysis for technology-enhanced learning: review and future directions. International Journal of Technology Enhanced Learning, 4(3/4), 172-190.

  11. Information Technology Management: Transition From the Automatic Digital Network to the Defense Message System

    Science.gov (United States)

    2003-04-08

    Information Technology Management Department of Defense Office of the Inspector General April 8, 2003 AccountabilityIntegrityQuality Transition From...Dates Covered (from... to) - Title and Subtitle Information Technology Management : Transition From the Automatic Digital Network to the Defense Message

  12. Current state of information technology use in a US primary care practice-based research network

    Directory of Open Access Journals (Sweden)

    James Andrews

    2004-02-01

    Conclusion While interest in enabling information technologies was high in KAN, adoption was variable, with use of several key technologies reported as low.The results suggest that research in this network that would be dependent on or enhanced by IT might be impeded and, generally, greater attention should be given to enhancing the IT infrastructure in primary care.

  13. Social Networking and Smart Technology: Viable Environmental Communication Tools…?

    Science.gov (United States)

    Montain, J.; Byrne, J. M.

    2010-12-01

    To what extent do popular social networking channels represent a viable means for disseminating information regarding environmental change to the general public? Are new forms of communication such as YouTube™, Facebook™, MySpace™ and Twitter™ and smart devices such as iPhone™ and BlackBerry™ useful and effective in terms motivating people into social action and behavioural modification; or do they simply pay ‘lip service’ to these pressing environmental issues? This project will explore the background connections between social networking and environmental communication and education; and outline why such tools might be an appropriate way to connect to a broad audience in an efficient and unconventional manner. Further, research will survey the current prevalence of reliable environmental change information on social networking Internet-based media; and finally, suggestions for improved strategies and new directions will be provided.

  14. Zigbee networking technology and its application in Lamost optical fiber positioning and control system

    Science.gov (United States)

    Jin, Yi; Zhai, Chao; Gu, Yonggang; Zhou, Zengxiang; Gai, Xiaofeng

    2010-07-01

    4,000 fiber positioning units need to be positioned precisely in LAMOST(Large Sky Area Multi-object Optical Spectroscopic Telescope) optical fiber positioning & control system, and every fiber positioning unit needs two stepper motors for its driven, so 8,000 stepper motors need to be controlled in the entire system. Wireless communication mode is adopted to save the installing space on the back of the focal panel, and can save more than 95% external wires compared to the traditional cable control mode. This paper studies how to use the ZigBee technology to group these 8000 nodes, explores the pros and cons of star network and tree network in order to search the stars quickly and efficiently. ZigBee technology is a short distance, low-complexity, low power, low data rate, low-cost two-way wireless communication technology based on the IEEE 802.15.4 protocol. It based on standard Open Systems Interconnection (OSI): The 802.15.4 standard specifies the lower protocol layers-the physical layer (PHY), and the media access control (MAC). ZigBee Alliance defined on this basis, the rest layers such as the network layer and application layer, and is responsible for high-level applications, testing and marketing. The network layer used here, based on ad hoc network protocols, includes the following functions: construction and maintenance of the topological structure, nomenclature and associated businesses which involves addressing, routing and security and a self-organizing-self-maintenance functions which will minimize consumer spending and maintenance costs. In this paper, freescale's 802.15.4 protocol was used to configure the network layer. A star network and a tree network topology is realized, which can build network, maintenance network and create a routing function automatically. A concise tree network address allocate algorithm is present to assign the network ID automatically.

  15. Geographic Location of a Computer Node Examining a Time-to-Location Algorithm and Multiple Autonomous System Networks

    Science.gov (United States)

    2004-03-01

    OPENT Simulation Model...................................................................................4-4 Figure 4.5 80% Paretto Distribution for...States, Figure 4.4 shows the MCI Network model. Figure 4.4 MCI Fast Ethernet OPENT Simulation Model Background traffic arrives according to

  16. Cellular Automata with network incubation in information technology diffusion

    Science.gov (United States)

    Guseo, Renato; Guidolin, Mariangela

    2010-06-01

    Innovation diffusion of network goods determines direct network externalities that depress sales for long periods and delay full benefits. We model this effect through a multiplicative dynamic market potential driven by a latent individual threshold embedded in a special Cellular Automata representation. The corresponding mean field approximation of its aggregate version is a Riccati equation with a closed form solution. This allows the detection of a change-point time separating an incubation period from a subsequent take-off due to a collective threshold (critical mass). Weighted nonlinear least squares are the main inferential methodology. An application is analysed with reference to USA fax machine diffusion.

  17. The science, technology and research network (STARNET) a searchable thematic compilation of web resources

    Science.gov (United States)

    Blados, W.R.; Cotter, G.A.; Hermann, T.

    2007-01-01

    International alliances in space efforts have resulted in a more rapid diffusion of space technology. This, in turn, increases pressure on organizations to push forward with technological developments and to take steps to maximize their inclusion into the research and development (R&D) process and the overall advancement and enhancement of space technology. To cope with this vast and rapidly growing amount of data and information that is vital to the success of the innovation, the Information Management Committee (IMC) of the Research Technology Agency (RTA) developed the science, technology and research network (STARNET). The purpose of this network is to facilitate access to worldwide information elements in terms of science, technology and overall research. It provides a virtual library with special emphasis on international security; a "one stop" information resource for policy makers, program managers, scientists, engineers, researchers and others. ?? 2007 IEEE.

  18. Technology Addiction: How Social Network Sites Impact our Lives

    Directory of Open Access Journals (Sweden)

    Natalie Gerhart

    2017-09-01

    Full Text Available Aim/Purpose: The media and research have made significant noise about young people’s addictions to technology, however the American Psychological Association (APA has reserved judgment on the clinical diagnosis of technology addiction. Research to understand technology addiction is important to the future of information systems development and behavioral usage understanding. Background: Addiction implies that there is a problem from which an IS client needs to try to recover, further implying a negative impact on life. Multiple defini-tions and outcomes of addictions have been studied in the information systems discipline, with virtually no focus on quality of life of the IS client. Methodology: This research employs a survey of students at a large southwestern United States university. Measures were adopted from previously validated sources. The final sample includes 413 usable responses analyzed using PLS. Contribution: This research broadens theoretical and practical understanding of SNS IS client perceptions by relating technology addiction to a broader impact on an individual’s life. By doing so, it provides guidance on society’s understanding of frequent technology use, as well as the development of new systems that are highly used. Findings: This research indicates diminished impulse control, distraction, social influence and satisfaction are all highly correlated with technology addiction; specifically, 55% of the variance in addiction is explained by these four indicators. However, the model further shows addiction has no significant relationship with overall satisfaction of life, indicating that IS clients do not correlate the two ideas. Recommendations for Practitioners: Heavy technology use may indicate a paradigm shift in how people inter-act, instead of a concern to be addressed by the APA. Recommendation for Researchers: Research needs to clearly define technology dependence, addiction, and overuse so that there is a strong

  19. The research of network database security technology based on web service

    Science.gov (United States)

    Meng, Fanxing; Wen, Xiumei; Gao, Liting; Pang, Hui; Wang, Qinglin

    2013-03-01

    Database technology is one of the most widely applied computer technologies, its security is becoming more and more important. This paper introduced the database security, network database security level, studies the security technology of the network database, analyzes emphatically sub-key encryption algorithm, applies this algorithm into the campus-one-card system successfully. The realization process of the encryption algorithm is discussed, this method is widely used as reference in many fields, particularly in management information system security and e-commerce.

  20. Effects of Adaptive Wormhole Routing in Event Builder Networks

    CERN Document Server

    Moser, R; Branson, J; Brett, A; Cano, E; Carboni, A; Ciganek, M; Cittolin, S; Erhan, S; Gigi, D; Glege, F; Gómez-Reino, Robert; Gulmini, M; Gutiérrez-Mlot, E; Gutleber, J; Jacobs, C; Kim, J C; Klute, M; Lipeles, E; Lopez-Perez, Juan Antonio; Maron, G; Meijers, F; Meschi, E; Murray, S; Oh, A; Orsini, L; Paus, C; Petrucci, A; Pieri, M; Pollet, L; Rácz, A; Sakulin, H; Sani, M; Schieferdecker, P; Schwick, C; Sumorok, K; Suzuki, I; Tsirigkas, D; Varela, J; Bauer, G

    2007-01-01

    The data acquisition system of the CMS experiment at the Large Hadron Collider features a two-stage event builder, which combines data from about 500 sources into full events at an aggregate throughput of 100 GByte/s. To meet the requirements, several architectures and interconnect technologies have been quantitatively evaluated. Both Gigabit Ethernet and Myrinet networks will be employed during the first run. Nearly full bi-section throughput can be obtained using a custom software driver for Myrinet based on barrel shifter traffic shaping. This paper discusses the use of Myrinet dual-port network interface cards supporting channel bonding to achieve virtual 5GBit/s links with adaptive routing to alleviate the throughput limitations associated with wormhole routing. Adaptive routing is not expected to be suitable for high-throughput event builder applications in high-energy physics. To corroborate this claim, results from the CMS event builder preseries installation at CERN are presented and the problems of ...

  1. NDEx - the Network Data Exchange, A Network Commons for Biologists | Informatics Technology for Cancer Research (ITCR)

    Science.gov (United States)

    Network models of biology, whether curated or derived from large-scale data analysis, are critical tools in the understanding of cancer mechanisms and in the design and personalization of therapies. The NDEx Project (Network Data Exchange) will create, deploy, and maintain an open-source, web-based software platform and public website to enable scientists, organizations, and software applications to share, store, manipulate, and publish biological networks.

  2. Network Coding is the 5G Key Enabling Technology

    DEFF Research Database (Denmark)

    Compta, Pol Torres; Fitzek, Frank; Roetter, Daniel Enrique Lucani

    2015-01-01

    such packets. However, packet lengths are quite heterogeneous in real networks, which can cause a high overhead or, alternatively, a high delay in the transmission of data packets. As we show, this can have a severe effect on a variety of applications. This paper proposes a series of mechanisms to manage...

  3. THE USE OF NEURAL NETWORK TECHNOLOGY TO MODEL SWIMMING PERFORMANCE

    Directory of Open Access Journals (Sweden)

    António José Silva

    2007-03-01

    Full Text Available The aims of the present study were: to identify the factors which are able to explain the performance in the 200 meters individual medley and 400 meters front crawl events in young swimmers, to model the performance in those events using non-linear mathematic methods through artificial neural networks (multi-layer perceptrons and to assess the neural network models precision to predict the performance. A sample of 138 young swimmers (65 males and 73 females of national level was submitted to a test battery comprising four different domains: kinanthropometric evaluation, dry land functional evaluation (strength and flexibility, swimming functional evaluation (hydrodynamics, hydrostatic and bioenergetics characteristics and swimming technique evaluation. To establish a profile of the young swimmer non-linear combinations between preponderant variables for each gender and swim performance in the 200 meters medley and 400 meters font crawl events were developed. For this purpose a feed forward neural network was used (Multilayer Perceptron with three neurons in a single hidden layer. The prognosis precision of the model (error lower than 0.8% between true and estimated performances is supported by recent evidence. Therefore, we consider that the neural network tool can be a good approach in the resolution of complex problems such as performance modeling and the talent identification in swimming and, possibly, in a wide variety of sports

  4. Incorporating network externalities into the technology acceptance model

    NARCIS (Netherlands)

    Song, Michael; Parry, Mark E.; Kawakami, Tomoko

    2009-01-01

    Research on network externalities has identified a number of product categories in which the market performance of an innovation (e.g., unit sales and revenues) is an increasing function of that innovation's installed base and the availability of complementary products. Innovation scholars have

  5. NEURAL NETWORK TECHNOLOGY IN STUDY OF FOREIGN EXCHANGE MARKET

    Directory of Open Access Journals (Sweden)

    Eduard Dadyan

    2015-09-01

    Full Text Available In this paper we present the results of neural network analysis of the effect of significant factors on the quotation of the exchange rate on the example of the formation of the dollar in terms of «the turbulence of the economy» in Russia.

  6. ATM Technology Adoption in U.S. Campus Networking.

    Science.gov (United States)

    Yao, Engui; Perry, John F.; Anderson, Larry S.; Brook, R. Dan; Hare, R. Dwight; Moore, Arnold J.; Xu, Xiaohe

    This study examined the relationships between ATM (asynchronous transfer mode) adoption in universities and four organizational variables: university size, type, finances, and information processing maturity. Another purpose of the study was to identify the current status of ATM adoption in campus networking. Subjects were university domain LAN…

  7. Aeronautical-Satellite-Assisted Process Being Developed for Information Exchange Through Network Technologies (Aero-SAPIENT)

    Science.gov (United States)

    Zernic, Michael J.

    2001-01-01

    Communications technologies are being developed to address safety issues during aviation travel. Some of these technologies enable the aircraft to be in constant bidirectional communications with necessary systems, people, and other aircraft that are not currently in place today. Networking technologies, wireless datalinks, and advanced avionics techniques are areas of particular importance that the NASA Glenn Research Center has contributed. Glenn, in conjunction with the NASA Ames Research Center, NASA Dryden Flight Research Center, and NASA Langley Research Center, is investigating methods and applications that would utilize these communications technologies. In mid-June 2000, the flight readiness of the network and communications technologies were demonstrated via a simulated aircraft. A van simulating an aircraft was equipped with advanced phased-array antennas (Advanced Communications/Air Traffic Management (AC/ATM) Advanced Air Transportation Technologies (AATT) project) that used commercial Ku-band satellite communications to connect Glenn, Dryden, and Ames in a combined system ground test. This test simulated air-ground bidirectional transport of real-time digital audio, text, and video data via a hybrid network configuration that demonstrated the flight readiness of the network and communications technologies. Specifically, a Controller Pilot Data Link Communications application was used with other applications to demonstrate a multiprotocol capability via Internet-protocol encapsulated ATN (Aeronautical Telecommunications Network) data packets. The significance of this combined ground test is its contribution to the Aero Information Technology Base Program Level I milestone (Software Technology investment area) of a real-time data link for the National Airspace System. The objective of this milestone was to address multiprotocol technology applicable for real-time data links between aircraft, a satellite, and the ground as well as the ability to

  8. A Real-Time Multimedia Streaming Protocol for Wireless Networks

    NARCIS (Netherlands)

    Scholten, Johan; Jansen, P.G.; Hanssen, F.T.Y.; Mank, Wietse; Zwikker, Arjan

    This paper describes a new token-based medium access protocol for real-time networks and its implementation on a wireless network. Originally, the protocol is developed for use in low cost domestic or home networks that are based on Ethernet hardware. In contrast to existing protocols the token is

  9. A Survey of Key Technology of Network Public Opinion Analysis

    OpenAIRE

    Li Su Ying

    2016-01-01

    The internet has become an important base for internet users to make comments because of its interactivity and fast dissemination. The outbreak of internet public opinion has become a major risk for network information security. Domestic and foreign researchers had carried out extensive and in-depth study on public opinion. Fruitful results have achieved in the basic theory research and emergency handling and other aspects of public opinion. But research on the public opinion in China is stil...

  10. Integrated Short Range, Low Bandwidth, Wearable Communications Networking Technologies

    Science.gov (United States)

    2012-04-30

    selected as the first method tested. Zephyr software was not received as early as needed to support the integration and testing schedule. So, the...squad. As the "lost" student came sufficiently close to the first squad to receive the modified control message, the "lost" node recognized the...It converts phonemes to a .wav file. 6 Analysis and Reporting of Network Performance Analysis and reporting of the results of demonstrations and

  11. Blog and social networks: an analysis from the governmentality technologies and gender

    Directory of Open Access Journals (Sweden)

    Georgina Remondino

    2012-11-01

    Full Text Available Currently, the explosion of personal blogs, social networking and other devices and software show how certain practices that were considered exclusives of intimate and private spheres, are now enrolled in the public space of the screen. Based on this scene, in this article we consider that these technologies work as technologies of the self and as control technologies, in the sense proposed by Foucault (1990. They mediate forms of self government in their public presentation modes, while play as control technologies of the others. Technological conditions also are imposed on the possible interactions and contribute to different modes of governance of feelings and specific forms of gender performativización. In this paper we analyze these categories and share some reflections from a case of study with young women consumers of blogs and social networks in the city of Córdoba.

  12. A Case Study of School Technology Support Networks

    Science.gov (United States)

    Hiltz, John R.

    2011-01-01

    Since the last decade of the 20th Century, there has been an effort to integrate technology into classroom instruction. The success of this effort has been uneven, as teachers have resisted this change. There has been a great deal of recent research on the importance of teacher-to-teacher interactions and successful organizational change. This…

  13. GSM Network Traffic Analysis | Ani | Nigerian Journal of Technology

    African Journals Online (AJOL)

    Nigerian Journal of Technology. Journal Home · ABOUT · Advanced Search · Current Issue · Archives · Journal Home > Vol 29, No 2 (2010) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Download this PDF file. The PDF file you selected should load here if your ...

  14. Business Value of Information Technology in Network Environments

    Science.gov (United States)

    Liu, Yucong

    2012-01-01

    Information Technology (IT) business value research is suggested as fundamental to the contribution of the IS discipline. The IS research community has accumulated a critical mass of IT business value studies, but only limited or mixed results have been found on the direct relationship between IT and firm performance. Extant studies mostly focus…

  15. The Audacity of Fiber-Wireless (FiWi) Networks

    Science.gov (United States)

    Maier, Martin; Ghazisaidi, Navid; Reisslein, Martin

    A plethora of enabling optical and wireless technologies have been emerging that can be used to build future-proof bimodal fiber-wireless (FiWi) broadband access networks. After overviewing key enabling radio-over-fiber (RoF) and radio-and-fiber (R&F) technologies and briefly surveying the state of the art of FiWi networks, we introduce an Ethernet-based access-metro FiWi network, called SuperMAN, that integrates next-generation WiFi and WiMAX networks with WDM-enhanced EPON and RPR networks. Throughout the paper we pay close attention to the technical challenges and opportunities of FiWi networks, but also elaborate on their societal benefits and potential to shift the current research focus from optical-wireless networking to the exploitation of personal and in-home computing facilities to create new unforeseen services and applications as we are about to enter the Petabyte age.

  16. Smartphone technologies and Bayesian networks to assess shorebird habitat selection

    Science.gov (United States)

    Zeigler, Sara; Thieler, E. Robert; Gutierrez, Ben; Plant, Nathaniel G.; Hines, Megan K.; Fraser, James D.; Catlin, Daniel H.; Karpanty, Sarah M.

    2017-01-01

    Understanding patterns of habitat selection across a species’ geographic distribution can be critical for adequately managing populations and planning for habitat loss and related threats. However, studies of habitat selection can be time consuming and expensive over broad spatial scales, and a lack of standardized monitoring targets or methods can impede the generalization of site-based studies. Our objective was to collaborate with natural resource managers to define available nesting habitat for piping plovers (Charadrius melodus) throughout their U.S. Atlantic coast distribution from Maine to North Carolina, with a goal of providing science that could inform habitat management in response to sea-level rise. We characterized a data collection and analysis approach as being effective if it provided low-cost collection of standardized habitat-selection data across the species’ breeding range within 1–2 nesting seasons and accurate nesting location predictions. In the method developed, >30 managers and conservation practitioners from government agencies and private organizations used a smartphone application, “iPlover,” to collect data on landcover characteristics at piping plover nest locations and random points on 83 beaches and barrier islands in 2014 and 2015. We analyzed these data with a Bayesian network that predicted the probability a specific combination of landcover variables would be associated with a nesting site. Although we focused on a shorebird, our approach can be modified for other taxa. Results showed that the Bayesian network performed well in predicting habitat availability and confirmed predicted habitat preferences across the Atlantic coast breeding range of the piping plover. We used the Bayesian network to map areas with a high probability of containing nesting habitat on the Rockaway Peninsula in New York, USA, as an example application. Our approach facilitated the collation of evidence-based information on habitat selection

  17. Neural network wavelet technology: A frontier of automation

    Science.gov (United States)

    Szu, Harold

    1994-01-01

    Neural networks are an outgrowth of interdisciplinary studies concerning the brain. These studies are guiding the field of Artificial Intelligence towards the, so-called, 6th Generation Computer. Enormous amounts of resources have been poured into R/D. Wavelet Transforms (WT) have replaced Fourier Transforms (FT) in Wideband Transient (WT) cases since the discovery of WT in 1985. The list of successful applications includes the following: earthquake prediction; radar identification; speech recognition; stock market forecasting; FBI finger print image compression; and telecommunication ISDN-data compression.

  18. European network for health technology assessment, EUnetHTA: planning, development, and implementation of a sustainable European network for health technology assessment.

    Science.gov (United States)

    Kristensen, Finn Børlum; Mäkelä, Marjukka; Neikter, Susanna Allgurin; Rehnqvist, Nina; Håheim, Lise Lund; Mørland, Berit; Milne, Ruairidh; Nielsen, Camilla Palmhøj; Busse, Reinhard; Lee-Robin, Sun Hae; Wild, Claudia; Espallargues, Mireia; Chamova, Julia

    2009-12-01

    The European network on Health Technology Assessment (EUnetHTA) aimed to produce tangible and practical results to be used in the various phases of health technology assessment and to establish a framework and processes to support this. This article presents the background, objectives, and organization of EUnetHTA, which involved a total of sixty-four partner organizations. Establishing an effective and sustainable structure for a transnational network involved many managerial, policy, and methodological tools, according to the objective of each task or Work Package. Transparency in organization, financial transactions, and decision making was a key principle in the management of the Project as was the commitment to appropriately involve stakeholders. EUnetHTA activities resulted in a clear management and governance structure, efficient partnership, and transnational cooperation. The Project developed a model for sustainable continuation of the EUnetHTA Collaboration. The EUnetHTA Project achieved its goals by producing a suite of practical tools, a strong network, and plans for continuing the work in a sustainable EUnetHTA Collaboration that facilitates and promotes the use of HTA at national and regional levels. Responsiveness to political developments in Europe should be balanced with maintaining a high level of ambition to promote independent, evidence-based information and well-tested tools for best practice based on a strong network of HTA institutions.

  19. The research of the evaluation system towards a core enterprise's network capability in the industrial technology alliance

    Science.gov (United States)

    Yan, Guangshi; Tian, Xuelian; Shen, Xue; You, Yue

    2017-05-01

    The social network theory is introduced for the industrial technology alliance based on the actual needs of the development of the industrial technology alliance. Through discussing the influence of the core enterprise network capacity on alliance performance, this article establishes evaluation system and index model of core enterprise network ability. We also evaluate and analyze the network capacity of core enterprise by fuzzy comprehensive evaluation method. So, the evaluation method is very important and full of practical value with a new research vision.

  20. A Review on Radio-Over-Fiber Technology-Based Integrated (Optical/Wireless) Networks

    Science.gov (United States)

    Rajpal, Shivika; Goyal, Rakesh

    2017-06-01

    In the present paper, radio-over-fiber (RoF) technology has been proposed, which is the integration of the optical and radio networks. With a high transmission capacity, comparatively low cost and low attenuation, optical fiber provides an ideal solution for accomplishing the interconnections. In addition, a radio system enables the significant mobility, flexibility and easy access. Therefore, the system integration can meet the increasing demands of subscribers for voice, data and multimedia services that require the access network to support high data rates at any time and any place inexpensively. RoF has the potentiality to the backbone of the wireless access network and it has gained significant momentum in the last decade as a potential last-mile access scheme. This paper gives the comprehensive review of RoF technology used in the communication system. Concept, applications, advantages and limitations of RoF technology are also discussed in this paper.

  1. Wearable Device Control Platform Technology for Network Application Development

    Directory of Open Access Journals (Sweden)

    Heejung Kim

    2016-01-01

    Full Text Available Application development platform is the most important environment in IT industry. There are a variety of platforms. Although the native development enables application to optimize, various languages and software development kits need to be acquired according to the device. The coexistence of smart devices and platforms has rendered the native development approach time and cost consuming. Cross-platform development emerged as a response to these issues. These platforms generate applications for multiple devices based on web languages. Nevertheless, development requires additional implementation based on a native language because of the coverage and functions of supported application programming interfaces (APIs. Wearable devices have recently attracted considerable attention. These devices only support Bluetooth-based interdevice communication, thereby making communication and device control impossible beyond a certain range. We propose Network Application Agent (NetApp-Agent in order to overcome issues. NetApp-Agent based on the Cordova is a wearable device control platform for the development of network applications, controls input/output functions of smartphones and wearable/IoT through the Cordova and Native API, and enables device control and information exchange by external users by offering a self-defined API. We confirmed the efficiency of the proposed platform through experiments and a qualitative assessment of its implementation.

  2. A Framework for Managing Inter-Site Storage Area Networks using Grid Technologies

    Science.gov (United States)

    Kobler, Ben; McCall, Fritz; Smorul, Mike

    2006-01-01

    The NASA Goddard Space Flight Center and the University of Maryland Institute for Advanced Computer Studies are studying mechanisms for installing and managing Storage Area Networks (SANs) that span multiple independent collaborating institutions using Storage Area Network Routers (SAN Routers). We present a framework for managing inter-site distributed SANs that uses Grid Technologies to balance the competing needs to control local resources, share information, delegate administrative access, and manage the complex trust relationships between the participating sites.

  3. A critical review on the applications of artificial neural networks in winemaking technology.

    Science.gov (United States)

    Moldes, O A; Mejuto, J C; Rial-Otero, R; Simal-Gandara, J

    2017-09-02

    Since their development in 1943, artificial neural networks were extended into applications in many fields. Last twenty years have brought their introduction into winery, where they were applied following four basic purposes: authenticity assurance systems, electronic sensory devices, production optimization methods, and artificial vision in image treatment tools, with successful and promising results. This work reviews the most significant approaches for neural networks in winemaking technologies with the aim of producing a clear and useful review document.

  4. [Attachment theory and baby slings/carriers: technological network formation].

    Science.gov (United States)

    Lu, Zxy-Yann Jane; Lin, Wan-Shiuan

    2011-12-01

    Healthcare providers recognize the important role played by attachment theory in explaining the close relationship between mental health and social behavior in mothers and their children. This paper uses attachment theory in a socio-cultural context to ascertain the mechanism by which baby slings/carriers, a new technology, produced and reproduced the scientific motherhood. It further applies a social history of technology perspective to understand how baby carriers and attachment theory are socially constructed and historically contingent on three major transformations. These transformations include the use of attachment theory-based baby carriers to further scientific motherhood; the use of baby slings/carriers to further the medicalization of breastfeeding and enhance mother-infant attachment; and the use of baby slings/carriers to transform woman's identities by integrating scientific motherhood, independence and fashion. Implications for nursing clinical policy are suggested.

  5. INTELLIGENT NETWORKS, SMART GRIDS CONCEPT, CRUCIAL TECHNOLOGIES FOR SUSTAINABLE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Constantin RADU

    2011-05-01

    Full Text Available In this article is presented the concept of smart grids, a very important technology for sustainable development. In the context of globalization of the world lives in an increasingly complex security environment, with rapid changes, some obvious, others less obvious implications in the short, medium or long term, international, national, local and up to every citizen. All countries in the globalized world economy is facing energy problems in terms of climate change have intensified in the twentieth century.

  6. Enabling Communication and Networking Technologies for Smart Grid

    OpenAIRE

    Garlapati, Shravan Kumar Reddy

    2014-01-01

    Transforming the aging electric grid to a smart grid is an active area of research in industry and the government. One of the main objectives of the smart grid is to improve the efficiency of power generation, transmission and distribution and also to improve the stability and the reliability of the grid. In order to achieve this, various processes involved in power generation, transmission, and distribution should be armed with advanced sensor technologies, computing, communication and netwo...

  7. Network Congestion Control in 4G Technology Through Iterative Server

    OpenAIRE

    Khaleel Ahmad; Sunil Kumar; Jayant Shekhar

    2012-01-01

    During the last few decades, mobile communication has developed rapidly. The increasing dependency of people on telecommunication resources is pushing even more current technological developments in the mobile world. In Real-time multimedia applications, such as Live TV or live movie, video conferencing, VoIP, on-line gaming etc. are exciting applications to the success of 4G.In todays Internet these applications are not subject to congestion control, therefore the growth of popularity of the...

  8. Controlling and Monitoring of Electric Feeders Using GSM Network Technology

    Directory of Open Access Journals (Sweden)

    AHMED Afaz Uddin

    2013-10-01

    Full Text Available The application of computer interfaced controlling devices is increasingly rapidly in modern age. Analogous wired systems are substituted by computer interfaced system alternatives in growingnumber of industries. Such control systems had been developed with complex and critical high-end stuffs. In this paper, we developed an automated system that controls the switching of electric feeder power supply featuring the existing GSM technology. The target is tooperate the device according to a preset sequence of on-off mode for three feeders after a particular time interval and to monitor the running condition. The device sends short message updating the status of every action. It also warns the consumers about load shedding using GSM module via sending message. Controlling the gate pulse of a MOSFET that operates the relay, it executes on-off operation of the circuit breaker of the respective feeders. Since GSM technology is used worldwide for communication, third world countries that are still struggling to meet the power demand can use this technology to operate and monitor the condition of power distribution. To operate the GSM device, AT command of GSM location operation for SIM900 is used. This paper targets to improve the power distribution system in developing countries like India, Bangladesh, Nepal where powercrisis and load shedding is quite a common phenomenon.

  9. Universal interface on Zynq{sup ®} SoC with CAN, RS-232, Ethernet and AXI GPIO for instrumentation & control

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Abhijeet, E-mail: akumar@ipr.res.in; Rajpal, Rachana; Pujara, Harshad; Mandaliya, Hitesh; Edappala, Praveenalal

    2016-11-15

    for remote control and monitor the data over Ethernet or CAN network.

  10. US long distance fiber optic networks: Technology, evolution and advanced concepts. Volume 1: Executive summary

    Science.gov (United States)

    1986-01-01

    Over the past two decades, fiber optics has emerged as a highly practical and cost-efficient communications technology. Its competitiveness vis-a-vis other transmission media, especially satellite, has become a critical question. This report studies the likely evolution and application of fiber optic networks in the United States to the end of the century. The outlook for the technology of fiber systems is assessed and forecast, scenarios of the evolution of fiber optic network development are constructed, and costs to provide service are determined and examined parametrically as a function of network size and traffic carried. Volume 1 consists of the Executive Summary. Volume 2 focuses on fiber optic technology and long distance fiber optic networks. Volume 3 develops a traffic and financial model of a nationwide long distance transmission network. Among the study's most important conclusions are: revenue requirements per circuit for LATA-to-LATA fiber optic links are less than one cent per call minute; multiplex equipment, which is likely to be required in any competing system, is the largest contributor to circuit costs; the potential capacity of fiber optic cable is very large and as yet undefined; and fiber optic transmission combined with other network optimization schemes can lead to even lower costs than those identified in this study.

  11. Applications of Server Clustering Technology in Sensor Networks

    Science.gov (United States)

    Davis, G.; Foley, S.; Battistuz, B.; Eakins, J.; Vernon, F. L.; Astiz, L.

    2007-12-01

    The Array Network Facility is charged with the acquisition and processing of seismic data from the Earthscope USArray experiment. High resolution data from 400 seismic sensors is streamed in near real-time to the ANF at UCSD in La Jolla, CA where it is automatically processed by machine and reviewed by analysts before being externally distributed to other data centers, including the IRIS Data Management Center. Data streams include six channels of 24- bit seismic data at 40 samples per second and over twenty channels of state-of-heath data at 1 sample per second per station. The sheer volume of data acquired and processed overwhelms the capabilities of any one affordable server system. Due to the relatively small buffers on-site (typically four hours) at the seismic stations, it is vital that the real-time systems remain online and acquiring data around the clock in order to meet data distribution requirements in a timely manner. Although the ANF does not have a 24x7x365 operations staff, the logistical difficulty in retrieving data from often remote locations after it expires from the on-site buffers requires the real- time systems to automatically recover from server failures without immediate operator intervention. To accomplish these goals, the ANF has implemented a five node Sun Solaris Cluster with acquisition and processing tasks shared by a mixture of integer and floating point processing units (Sun T2000 and V240/V245 systems). This configuration is an improvement over the typical regional network data center for a number of reasons: - By implementing a shared storage architecture, acquisition, processing, and distribution can be split between multiple systems working on the same data set, thus limiting the impact of a particularly resource-intensive task on the acquisition system. - The Solaris Cluster software monitors the health of the cluster nodes and provides the ability automatically fail over processes from a failed node to a healthy node

  12. Technologies, Methodologies and Challenges in Network Intrusion Detection and Prevention Systems

    Directory of Open Access Journals (Sweden)

    Nicoleta STANCIU

    2013-01-01

    Full Text Available This paper presents an overview of the technologies and the methodologies used in Network Intrusion Detection and Prevention Systems (NIDPS. Intrusion Detection and Prevention System (IDPS technologies are differentiated by types of events that IDPSs can recognize, by types of devices that IDPSs monitor and by activity. NIDPSs monitor and analyze the streams of network packets in order to detect security incidents. The main methodology used by NIDPSs is protocol analysis. Protocol analysis requires good knowledge of the theory of the main protocols, their definition, how each protocol works.

  13. The Evolution of Technology in the Deep Space Network: A History of the Advanced Systems Program

    Science.gov (United States)

    Layland, J. W.; Rauch, L. L.

    1997-04-01

    This article presents a survey of the principal efforts of the DSN Advanced Systems Program and its impact upon the operational Deep Space Network from about 1960 to 1995. The article is structured along two main themes. First is a tour of the fundamental services provided by the Network and the physical elements and technologies that support these services. The second theme is presented as a series of focused case histories of changes inspired by specific missions, such as Galileo, Voyager, or Mariner{Venus{Mercury, or by specific technologies, such as the application of fiber optics. A bibliographic entree to a substantial body of other reading material also is provided.

  14. Network communication for remote technology and NDT controls on current nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Capitaine, A. [Electricite de France, 92 - Clamart (France). Service Etudes et Projets Thermiques et Nucleaires

    2001-07-01

    Among the most important targets for ''UTILITIES'' are to increase nuclear power plant availability and reduce the workers dosimetry. A possible way to reach these targets is to reduce the duration of the refueling period and to limit the number of operators in the work areas It is necessary to use remote technology and to provide much equipment to support the main activities during refueling. Remote technology is a possible solution to remove operators from the maintenance area. The main activities concerned are the NDT inspection on the primary components and fuel handling system. Recent progress on remote technology made by the electronic industry and network communication has increased their capacities. It is easier now to use them, and more and more people are familiar with these technologies. Internet, manufacturing, supervision, and surgery use these technologies. Now it seems appropriate to examine these technologies for current maintenance in nuclear plants. Remote technologies and communication network can help to solve current difficulties in the maintenance field and dosimetry limits. For a long time, many people thought that the cost and the difficulty of applying new technologies would be not extremely expensive, but this is no longer the case. Now with the first feed back we can show that these technologies are a good answer for increased availability and reduction of dosimetry. (author)

  15. An agent-based model of centralized institutions, social network technology, and revolution.

    Science.gov (United States)

    Makowsky, Michael D; Rubin, Jared

    2013-01-01

    This paper sheds light on the general mechanisms underlying large-scale social and institutional change. We employ an agent-based model to test the impact of authority centralization and social network technology on preference falsification and institutional change. We find that preference falsification is increasing with centralization and decreasing with social network range. This leads to greater cascades of preference revelation and thus more institutional change in highly centralized societies and this effect is exacerbated at greater social network ranges. An empirical analysis confirms the connections that we find between institutional centralization, social radius, preference falsification, and institutional change.

  16. Multi-layer architecture for realization of network virtualization using MPLS technology

    Directory of Open Access Journals (Sweden)

    Ghasem Ahmadeyan Mazhin

    2017-03-01

    Full Text Available Network virtualization (NV increases Internet flexibility by separating policies from mechanisms. This makes developing new applications, managing the Internet, and supporting different applications much easier. In this study, we introduce a multi-layer architecture which combines multi-level multiprotocol label switching (MPLS technology with NV. The proposed architecture combines the high speed advantage of MPLS with the high flexibility of NV. We use MPLS in MPLS technique and encapsulate each MPLS packet within another when it encounters a new virtual network. Our architecture has the potential to improve Internet flexibility and pave the way for deployment and commercialization of NV in next generation networks.

  17. Collaboration on technological innovation in Danish fashion chains: A network perspective

    DEFF Research Database (Denmark)

    Tambo, Torben

    2014-01-01

    With brand owners struggling to compete with new products, physical production processes and sourcing logistics, innovation taking place in retail networks is often overlooked. Networks in retailing are comprised by the brand owner, the varieties of single- and multi-brand stores, chains...... and departments stores, technology and service providers, ownership structures and local level supply chain facilities. This paper analyses theoretical and empirical views of innovation in international retail networks using lead actors in the (Danish) fashion industry as a case to highlight how this industry...

  18. An agent-based model of centralized institutions, social network technology, and revolution.

    Directory of Open Access Journals (Sweden)

    Michael D Makowsky

    Full Text Available This paper sheds light on the general mechanisms underlying large-scale social and institutional change. We employ an agent-based model to test the impact of authority centralization and social network technology on preference falsification and institutional change. We find that preference falsification is increasing with centralization and decreasing with social network range. This leads to greater cascades of preference revelation and thus more institutional change in highly centralized societies and this effect is exacerbated at greater social network ranges. An empirical analysis confirms the connections that we find between institutional centralization, social radius, preference falsification, and institutional change.

  19. Situation awareness of active distribution network: roadmap, technologies, and bottlenecks

    DEFF Research Database (Denmark)

    Lin, Jin; Wan, Can; Song, Yonghua

    2016-01-01

    With the rapid development of local generation and demand response, the active distribution network (ADN), which aggregates and manages miscellaneous distributed resources, has moved from theory to practice. Secure and optimal operations now require an advanced situation awareness (SA) system so...... in the project of developing an SA system as the basic component of a practical active distribution management system (ADMS) deployed in Beijing, China, is presented. This paper reviews the ADN’s development roadmap by illustrating the changes that are made in elements, topology, structure, and control scheme....... Taking into consideration these hardware changes, a systematic framework is proposed for the main components and the functional hierarchy of an SA system for the ADN. The SA system’s implementation bottlenecks are also presented, including, but not limited to issues in big data platform, distribution...

  20. Latest generation interconnect technologies in APEnet+ networking infrastructure

    Science.gov (United States)

    Ammendola, Roberto; Biagioni, Andrea; Cretaro, Paolo; Frezza, Ottorino; Lo Cicero, Francesca; Lonardo, Alessandro; Martinelli, Michele; Stanislao Paolucci, Pier; Pastorelli, Elena; Rossetti, Davide; Simula, Francesco; Vicini, Piero

    2017-10-01

    In this paper we present the status of the 3rd generation design of the APEnet board (V5) built upon the 28nm Altera Stratix V FPGA; it features a PCIe Gen3 x8 interface and enhanced embedded transceivers with a maximum capability of 12.5Gbps each. The network architecture is designed in accordance to the Remote DMA paradigm. The APEnet+ V5 prototype is built upon the Stratix V DevKit with the addition of a proprietary, third party IP core implementing multi-DMA engines. Support for zero-copy communication is assured by the possibility of DMA-accessing either host and GPU memory, offloading the CPU from the chore of data copying. The current implementation plateaus to a bandwidth for memory read of 4.8GB/s. Here we describe the hardware optimization to the memory write process which relies on the use of two independent DMA engines and an improved TLB.

  1. Community and Social Network Sites as Technology Enhanced Learning Environments

    DEFF Research Database (Denmark)

    Ryberg, Thomas; Christiansen, Ellen

    2008-01-01

    This paper examines the affordance of the Danish social networking site Mingler.dk for peer-to-peer learning and development. With inspiration from different theoretical frameworks, the authors argue how learning and development in such social online systems can be conceptualised and analysed....... Theoretically the paper defines development in accordance with Vygotsky's concept of the zone of proximal development, and learning in accordance with Wenger's concept of communities of practice. The authors suggest analysing the learning and development taking place on Mingler.dk by using these concepts...... supplemented by the notion of horizontal learning adopted from Engestrm and Wenger. Their analysis shows how horizontal learning happens by crossing boundaries between several sites of engagement, and how the actors' multiple membership enables the community members to draw on a vast amount of resources from...

  2. Diseño de un cuentametros universal con conexión a Ethernet

    OpenAIRE

    Berlanga Castellví, Marcos

    2011-01-01

    Este proyecto consiste el diseño, desarrollo e implementación de un dispositivo cuentametros de alta precisión, capaz de poder gestionar la monitorización de la fabricación vía Web a través de Ethernet y erradicar totalmente la posibilidad del error humano en la entrada manual de metrajes durante las diferentes fases del producto. El dispositivo electrónico está formado por dos etapas. La etapa principal es en sí el dispositivo cuentametros que realiza el conteo de impulsos que...

  3. Performance evaluation of 10GBASE optical transceivers for Cisco 10-gigabit Ethernet switching architecture

    Science.gov (United States)

    Zhang, Xiaojing; Cain, Jeff C.

    2002-09-01

    This paper presents the process and methodology employed to perform evaluation and analyses for the optical interface that delivers and receives 10Gb/s Ethernet traffic on Cisco's industrial leading switching architecture. Especially, we examined in detail the optical properties for commercially available 10GBASE-LR transceiver modules, with respect to IEEE 802.3ae specifications. The sampled results under room temperature are listed for comparison. Eye diagrams were recorded as a function of transmission distance, as well as temperature variation. System stability issues are also studied following a brief introduction to Cisco standard ODVT (Optical Design Verification Test) procedure.

  4. Control PID de un secador mediante autómatas programables conectados por ethernet

    OpenAIRE

    Carrillo Valencia, Víctor

    2012-01-01

    Este proyecto final de carrera se centra en el control PID de temperatura de un secador convencional mediante autómatas programables conectados por Ethernet. Se busca con ello la configuración de un red de comunicaciones entre dos PLC’s industriales (Programmable Logic Controller en sus siglas en inglés) y el control de temperatura mediante un controlador PID. Los controladores lógicos programables o PLC’s son dispositivos electrónicos muy usados en automatización industrial...

  5. Технология Ethernet-over-PDH

    OpenAIRE

    Катлеров, Павел

    2007-01-01

    Ethernet-over-PDH (EoPDH) — это набор технологий и стандартов, которые позволяют передавать фреймы Ethernet по существующей инфраструктуре PDH. Это позволяет операторам воспользоваться обширной сетью традиционного оборудования PDH и SDH для предоставления новых услуг на базе Ethernet. В дополнение к этому технология EoPDH устанавливает мост для совместимости и дальнейшей миграции к сетям Ethernet....

  6. Policy gaps and technological deficiencies in social networking environments: Implications for information sharing

    Directory of Open Access Journals (Sweden)

    Stephen M. Mutula

    2013-02-01

    Full Text Available Background: With the growing adoption and acceptance of social networking, there are increased concerns about the violation of the users’ legitimate rights such as privacy, confidentiality, trust, security, safety, content ownership, content accuracy, integrity, access and accessibility to computer and digital networks amongst others.Objectives: The study sought to investigate the following research objectives to: (1 describe the types of social networks, (2 examine global penetration of the social networks, (3 outline the users’ legitimate rights that must be protected in the social networking sites (SNS, (4 determine the methods employed by SNS to protect the users’ legitimate rights and (5 identify the policy gaps and technological deficiencies in the protection of the users’ legitimate rights in the SNS.Method: A literature survey and content analysis of the SNS user policies were used to address objective four and objective five respectively.Results: The most actively used sites were Facebook and Twitter. Asian markets were leading in participation and in creating content than any other region. Business, education, politics and governance sectors were actively using social networking sites. Social networking sites relied upon user trust and internet security features which however, were inefficient and inadequate.Conclusion: Whilst SNS were impacting people of varying ages and of various professional persuasions, there were increased concerns about the violation and infringement of the users’ legitimate rights. Reliance on user trust and technological security features SNS to protect the users’ legitimate rights seemed ineffectual and inadequate.

  7. Policy gaps and technological deficiencies in social networking environments: Implications for information sharing

    Directory of Open Access Journals (Sweden)

    Stephen M. Mutula

    2013-06-01

    Full Text Available Background: With the growing adoption and acceptance of social networking, there are increased concerns about the violation of the users’ legitimate rights such as privacy, confidentiality, trust, security, safety, content ownership, content accuracy, integrity, access and accessibility to computer and digital networks amongst others.Objectives: The study sought to investigate the following research objectives to: (1 describe the types of social networks, (2 examine global penetration of the social networks, (3 outline the users’ legitimate rights that must be protected in the social networking sites (SNS, (4 determine the methods employed by SNS to protect the users’ legitimate rights and (5 identify the policy gaps and technological deficiencies in the protection of the users’ legitimate rights in the SNS.Method: A literature survey and content analysis of the SNS user policies were used to address objective four and objective five respectively.Results: The most actively used sites were Facebook and Twitter. Asian markets were leading in participation and in creating content than any other region. Business, education, politics and governance sectors were actively using social networking sites. Social networking sites relied upon user trust and internet security features which however, were inefficient and inadequate.Conclusion: Whilst SNS were impacting people of varying ages and of various professional persuasions, there were increased concerns about the violation and infringement of the users’ legitimate rights. Reliance on user trust and technological security features SNS to protect the users’ legitimate rights seemed ineffectual and inadequate.

  8. Development of technology needs for the SEI TNIM network

    Science.gov (United States)

    Wachs, M. R.; Zuzek, J. E.

    1991-01-01

    A comparison of the salient features of the SEI with previous space exploration programs shows the need for a telecommunications, navigation and information management (TNIM) system level reoptimization. An approach is developed that takes the various candidate mission plans and decomposes them into architectural building blocks, many of which are common to several of the plans. Once identified, each of these blocks can then be parametrically examined with respect to performance benefit, cost, technology, and schedule risk tradeoffs. As the Space Exploration Initiative plan is established, these TNIM building blocks may be fused into an optimized system architecture.

  9. Sustainable Technology Analysis of Artificial Intelligence Using Bayesian and Social Network Models

    Directory of Open Access Journals (Sweden)

    Juhwan Kim

    2018-01-01

    Full Text Available Recent developments in artificial intelligence (AI have led to a significant increase in the use of AI technologies. Many experts are researching and developing AI technologies in their respective fields, often submitting papers and patent applications as a result. In particular, owing to the characteristics of the patent system that is used to protect the exclusive rights to registered technology, patent documents contain detailed information on the developed technology. Therefore, in this study, we propose a statistical method for analyzing patent data on AI technology to improve our understanding of sustainable technology in the field of AI. We collect patent documents that are related to AI technology, and then analyze the patent data to identify sustainable AI technology. In our analysis, we develop a statistical method that combines social network analysis and Bayesian modeling. Based on the results of the proposed method, we provide a technological structure that can be applied to understand the sustainability of AI technology. To show how the proposed method can be applied to a practical problem, we apply the technological structure to a case study in order to analyze sustainable AI technology.

  10. New networked technologies and carers of people with dementia : an interview study

    OpenAIRE

    Powell, John; Gunn, Lee; Lowe, Pam; Sheehan, Bart; Griffiths, Frances; Clarke, Aileen

    2010-01-01

    Dementia is one of the greatest contemporary health and social care challenges, and novel approaches to the care of its sufferers are needed. New information and communication technologies (ICT) have the potential to assist those caring for people with dementia, through access to networked information and support, tracking and surveillance. This article reports the views about such new technologies of 34 carers of people with dementia. We also held a group discussion with nine carers for resp...

  11. NASA technology transfer network communications and information system: TUNS user survey

    Science.gov (United States)

    1992-01-01

    Applied Expertise surveyed the users of the deployed Technology Utilization Network System (TUNS) and surveyed prospective new users in order to gather background information for developing the Concept Document of the system that will upgrade and replace TUNS. Survey participants broadly agree that automated mechanisms for acquiring, managing, and disseminating new technology and spinoff benefits information can and should play an important role in meeting NASA technology utilization goals. However, TUNS does not meet this need for most users. The survey describes a number of systematic improvements that will make it easier to use the technology transfer mechanism, and thus expedite the collection and dissemination of technology information. The survey identified 26 suggestions for enhancing the technology transfer system and related processes.

  12. Network support, technology use, depression, and ART adherence among HIV-positive MSM of color.

    Science.gov (United States)

    Holloway, I W; Tan, D; Dunlap, S L; Palmer, L; Beougher, S; Cederbaum, J A

    2017-09-01

    Depression is associated with poor antiretroviral therapy (ART) adherence among people living with HIV/AIDS. This relationship may be moderated by an individual's social network characteristics. Our study sought to examine social network correlates of treatment adherence among HIV-positive men recruited from social service agencies throughout Los Angeles County (N = 150) to inform technology-driven social support interventions for this population. We administered egocentric social network and computer-assisted survey interviews focused on demographic characteristics, health history, depressive symptoms, and ART adherence, where adherence was assessed by the number of reasons participants missed taking their medication, if ever. Significant univariate correlates of adherence were included in a multivariable regression analysis, where the moderating effect of having a network member who reminds participants to take their HIV medication on the relationship between depression and adherence was tested. Over 60% of participants reported clinically significant depressive symptoms; this was significantly associated with lower adherence among those without someone in their social network to remind them about taking their HIV medication, even after adjusting for covariates in an ordinary least squares regression (adjusted mean difference b = -1.61, SE = 0.42, p = 0.0003). Having a network member who reminds participants to take their ART medication significantly ameliorated the negative association between depression and treatment adherence, especially for those reporting greater depressive symptoms (p = 0.0394). Additionally, participants demonstrated high rates of technology use to communicate with social network members. In order to achieve the aims of the National HIV/AIDS Strategy, innovative interventions addressing mental health to improve ART adherence are needed. Network strategies that leverage technology may be helpful for improving ART

  13. Usability and use reference in the social network facebook: a netnographic analysis of technological users

    Directory of Open Access Journals (Sweden)

    Naiara Silva Ferreira

    2015-10-01

    Full Text Available This article presents a study about the preference of use in virtual social networks, using Facebook as object of study, to identify the motivational factors for the usability of this technology platform. The social network Facebook has been chosen to present a technological scenario of high sociability and virtual interaction. The methodology used was the netnography, being made through the collection of discussions in North American sites of news and forums online, where there is a large critical user participation on the internet, about the gains and frustrations in this context. The content analysis was performed comparing the categories of users found in the literature about values that motivate consumer technology, describing the hedonic, social, utilitarian values and perceptions of risk in consumption when related to lack of privacy. The results show two main groups of users of this technology and 7 subgroups. Therefore, the contribution of the study is that the formation of these groups may reflect technological usability of user groups around the world. The study also brings to the discussion issues related to the behaviors of the users of virtual networks which can be useful for businesses and their relationships with consumers and also the development of new knowledge from such criticism and demands that digital consumers expose about the technologies.

  14. Using social knowledge networking technology to enable meaningful use of electronic health record technology in hospitals and health systems.

    Science.gov (United States)

    Rangachari, Pavani

    2014-12-01

    Despite the federal policy momentum towards "meaningful use" of Electronic Health Records, the healthcare organizational literature remains replete with reports of unintended adverse consequences of implementing Electronic Health Records, including: increased work for clinicians, unfavorable workflow changes, and unexpected changes in communication patterns & practices. In addition to being costly and unsafe, these unintended adverse consequences may pose a formidable barrier to "meaningful use" of Electronic Health Records. Correspondingly, it is essential for hospital administrators to understand and detect the causes of unintended adverse consequences, to ensure successful implementation of Electronic Health Records. The longstanding Technology-in-Practice framework emphasizes the role of human agency in enacting structures of technology use or "technologies-in-practice." Given a set of unintended adverse consequences from health information technology implementation, this framework could help trace them back to specific actions (types of technology-in-practice) and institutional conditions (social structures). On the other hand, the more recent Knowledge-in-Practice framework helps understand how information and communication technologies ( e.g. , social knowledge networking systems) could be implemented alongside existing technology systems, to create new social structures, generate new knowledge-in-practice, and transform technology-in-practice. Therefore, integrating the two literature streams could serve the dual purpose of understanding and overcoming unintended adverse consequences of Electronic Health Record implementation. This paper seeks to: (1) review the theoretical literatures on technology use & implementation, and identify a framework for understanding & overcoming unintended adverse consequences of implementing Electronic Health Records; (2) outline a broad project proposal to test the applicability of the framework in enabling "meaningful use

  15. Fighting the Network: A Critique of the Network as a Security Technology

    NARCIS (Netherlands)

    de Goede, M.

    2012-01-01

    It is difficult to think about global connectivity without confronting the importance of the network as a metaphor and a model of contemporary social life and transnational danger. From the dispersed global terrorism threat, to the spread of (computer) viruses, from the identification of organized

  16. WEB 2.0 SERVICES AS A TECHNOLOGICAL FOUNDATION OF A NETWORK PROJECT

    Directory of Open Access Journals (Sweden)

    Tatiana Ivanovna Kanyanina

    2015-02-01

    Full Text Available In the light of the requirements of the federal state educational standard increases the value of the network design based on the use of Web 2.0 services. The article outlines the range of technological challenges faced by the developer of the network project, such as the choice of the network platform of the project, design tools and tools for project results placement, project coordination and organization of communication lines, the choice of instruments for the promotion of the project on the Internet. The main attention is focused on the examples of network services that address these challenges, and describe their features. The authors rely on the specific network projects implemented in Nizhny Novgorod region. The paper analyzes the possible project’s network sites (network environment. The article gives a general description of each environment, marks its distinctive features, advantages and disadvantages. The article presents project tasks’ examples, designed on the basis of the variety of Web 2.0 services that functionally meet the requirements of a particular task, examples of services to represent the project products and to summarize its results. Attention is paid to the organization of the lines of communication of the project participants and organizers and to the role of network services in the project promotion on the Internet.

  17. SECURITY ANALYSIS OF WIRELESS NETWORKS USING WEP-TECHNOLOGIES

    OpenAIRE

    Юдін, О.; Національний авіаційний університет; Весельська, О.; Національний авіаційний університет

    2013-01-01

    In the article the quality of information security in wireless networks by using WEP-encryption scheme and RC4 symmetrical streaming algorithm was studied. The tips and ways to improve the security of information are given. В статье исследована эффективность защиты информационных ресурсов в беспроводных сетях на основе использования WEP-протокола и симметричного алгоритма шифрования RC4. Рассмотрены пути и дальнейшие возможности повышения эффективности методов защиты информации. У стат...

  18. Contextual Language Learning: Educational Potential and Use of Social Networking Technology in Higher Education

    Science.gov (United States)

    Huang, Chung-Kai; Lin, Chun-Yu; Villarreal, Daniel Steve

    2014-01-01

    This study investigates the potential and use of social networking technology, specifically Facebook, to support a community of practice in an undergraduate-level classroom setting. Facebook is used as a tool with which to provide supplementary language learning materials to develop learners' English writing skills. We adopted the technology…

  19. Improving new technology venture performance under direct and indirect network externality conditions

    NARCIS (Netherlands)

    Podoynitsyna, Ksenia; Song, Michael; van der Bij, Hans; Weggeman, Mathieu

    This study compares the effectiveness of five responses to external uncertainty in markets with network externalities: avoidance, imitation, control, cooperation, and real options reasoning as a form of strategic flexibility. Our analysis of 385 new technology ventures shows that direct and indirect

  20. The Network University? Technology, Culture and Organisational Complexity in Contemporary Higher Education

    Science.gov (United States)

    Lewis, Tania; Marginson, Simon; Snyder, Ilana

    2005-01-01

    This paper discusses the concept of the network organisation in relation to the technologised university. Drawing upon the early findings of a study that examines the impact of information and communication technologies (ICTs) on both organisational and teaching and learning issues in five Australian universities, the authors discuss the way in…

  1. Development of Bioinformatic and Experimental Technologies for Identification of Prokaryotic Regulatory Networks

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, Charles E. [Brown Univ., Providence, RI (United States); McCue, Lee Ann [Brown Univ., Providence, RI (United States)

    2008-07-31

    The transcription regulatory network is arguably the most important foundation of cellular function, since it exerts the most fundamental control over the abundance of virtually all of a cell’s functional macromolecules. The two major components of a prokaryotic cell’s transcription regulation network are the transcription factors (TFs) and the transcription factor binding sites (TFBS); these components are connected by the binding of TFs to their cognate TFBS under appropriate environmental conditions. Comparative genomics has proven to be a powerful bioinformatics method with which to study transcription regulation on a genome-wide level. We have further extended comparative genomics technologies that we introduced over the last several years. Specifically, we developed and applied statistical approaches to analysis of correlated sequence data (i.e., sequences from closely related species). We also combined these technologies with functional genomic, proteomic and sequence data from multiple species, and developed computational technologies that provide inferences on the regulatory network connections, identifying the cognate transcription factor for predicted regulatory sites. Arguably the most important contribution of this work emerged in the course of the project. Specifically, the development of novel procedures of estimation and prediction in discrete high-D settings has broad implications for biology, genomics and well beyond. We showed that these procedures enjoy advantages over existing technologies in the identification of TBFS. These efforts are aimed toward identifying a cell’s complete transcription regulatory network and underlying molecular mechanisms.

  2. Using home networks to create atmospheres in the home: Technology push or (latent) user need?

    NARCIS (Netherlands)

    Kuiper-Hoyng, L.L.M.L.; Beusmans, J.W.F.

    2004-01-01

    The Atmosphere Controller is an implementation of home networking technology that could make life at home a totally new experience. An atmosphere is created by combining light (intensity and colour), music and wallpaper projection. To find out if is this type of experience fits into everyday life of

  3. A Learning Content Authoring Approach Based on Semantic Technologies and Social Networking: An Empirical Study

    Science.gov (United States)

    Nesic, Sasa; Gasevic, Dragan; Jazayeri, Mehdi; Landoni, Monica

    2011-01-01

    Semantic web technologies have been applied to many aspects of learning content authoring including semantic annotation, semantic search, dynamic assembly, and personalization of learning content. At the same time, social networking services have started to play an important role in the authoring process by supporting authors' collaborative…

  4. Social Media and Networking Technologies: An Analysis of Collaborative Work and Team Communication

    Science.gov (United States)

    Okoro, Ephraim A.; Hausman, Angela; Washington, Melvin C.

    2012-01-01

    Digital communication increases students' learning outcomes in higher education. Web 2.0 technologies encourages students' active engagement, collaboration, and participation in class activities, facilitates group work, and encourages information sharing among students. Familiarity with organizational use and sharing in social networks aids…

  5. The Impact of Content-Based Network Technologies on Perceptions of Nutrition Literacy

    Science.gov (United States)

    Brewer, Hannah; Church, E. Mitchell; Brewer, Steven L.

    2016-01-01

    Background: Consumers are exposed to obesogenic environments on a regular basis. Building nutrition literacy is critical for sustaining healthy dietary habits for a lifetime and reducing the prevalence of chronic disease. Purpose: There is a need to investigate the impact of content-based network (CBN) technologies on perceptions of nutrition…

  6. A Co-Citation Network of Young Children's Learning with Technology

    Science.gov (United States)

    Tang, Kai-Yu; Li, Ming-Chaun; Hsin, Ching-Ting; Tsai, Chin-Chung

    2016-01-01

    This paper used a novel literature review approach--co-citation network analysis--to illuminate the latent structure of 87 empirical papers in the field of young children's learning with technology (YCLT). Based on the document co-citation analysis, a total of 206 co-citation relationships among the 87 papers were identified and then graphically…

  7. New Technology Changing The Face of Mobile Seismic Networks

    Science.gov (United States)

    Brisbourne, A.; Denton, P.; Seis-Uk

    SEIS-UK, a seismic equipment pool and data management facility run by a consortium of four UK universities (Leicester, Leeds, Cambridge and Royal Holloway, London) completed its second phase in 2001. To compliment the existing broadband equipment pool, which has been deployed to full capacity to date, the consortium undertook a tender evaluation process for low-power, lightweight sensors and recorders, for use on both controlled source and passive seismic experiments. The preferred option, selected by the consortium, was the Guralp CMG-6TD system, with 150 systems ordered. The CMG-6TD system is a new concept in temporary seismic equipment. A 30s- 100Hz force-feedback sensor, integral 24bit digitiser and 3-4Gbyte of solid-state memory are all housed in a single unit. Use of the most recent technologies has kept the power consumption to below 1W and the weight to 3.5Kg per unit. The concept of the disk-swap procedure for obtaining data from the field has been usurped by a fast data download technique using firewire technology. This allows for rapid station servicing, essential when 150 stations are in use, and also ensures the environmental integrity of the system by removing the requirement for a disk access port and envi- ronmentally exposed data disk. The system therefore meets the criteria for controlled source and passive seismic experiments: (1) the single unit concept and low-weight is designed for rapid deployment on short-term projects; (2) the low power consumption reduces the power-supply requirements facilitating deployment; (3) the low self-noise and bandwidth of the sensor make it applicable to passive experiments involving nat- ural sources. Further to this acquisition process, in collaboration with external groups, the SEIS- UK data management procedures have been streamlined with the integration of the Guralp GCF format data into the PASSCAL PDB software. This allows for rapid dissemination of field data and the production of archive-ready datasets

  8. Readout electronics for CBM-TOF super module quality evaluation based on 10 Gbps ethernet

    Science.gov (United States)

    Jiang, D.; Cao, P.; Huang, X.; Zheng, J.; Wang, Q.; Li, B.; Li, J.; Liu, S.; An, Q.

    2017-07-01

    The Compressed Baryonic Matter-Time of Flight (CBM-TOF) wall uses high performance of Multi-gap Resistive Plate Chambers (MRPC) assembled in super modules to identify charged particles with high channel density and high measurement precision at high event rate. Electronics meet the challenge for reading data out from a super module at high speed of about 6 Gbps in real time. In this paper, the readout electronics for CBM-TOF super module quality evaluation is proposed based on 10 Gigabit Ethernet. The digitized TOF data from one super module will be concentrated at the front-end electronics residing on the side of the super module and transmitted to an extreme speed readout module (XSRM) housed in the backend crate through the PCI Express (PCIe) protocol via optic channels. Eventually, the XSRM transmits data to the data acquisition (DAQ) system through four 10 Gbps Ethernet ports in real time. This readout structure has advantages of high performance and expansibility. Furthermore, it is easy to operate. Test results on the prototype show that the overall data readout performance for each XSRM can reach up to 28.8 Gbps, which means XSRM can meet the requirement of reading data out from 4 super modules with 1280 channels in real time.

  9. Design and Implementation of Ethernet Based Embedded System for the Measurement of Dielectric Constant in Solids

    Directory of Open Access Journals (Sweden)

    Manikumar C.

    2011-12-01

    Full Text Available Measurement of physical parameter is one of the most important task before it is put to use in any application. In this direction dielectric constant plays an important role, especially in solids. This is because; dielectric data helps in gaining insight into the molecular structure of compounds, estimate the amount of moisture in wood, sand and agricultural products and used for an online determination of water content in crude oil flowing in a pipeline. The main aim of the present work is design and implementation of an Ethernet based embedded system to measure dielectric constant in solids. The system utilizes frequency measurement technique for determination of capacitance using the microcontroller as a tool while most of the conventional techniques measure the capacitance using the bridge methods. Low power high performance C8051F120 mixed signal controller controls the entire assembly. The data is displayed on LCD, hyper terminal of the system monitor and web server simultaneously with date and time using Ethernet.

  10. Technological Cooperation Networks at Bio-Manguinhos: the Role of Information and Communication Technologies

    OpenAIRE

    Lázaro Pereira de Oliveira; Claudio Pitassi; Antônio Augusto Gonçalves

    2015-01-01

    This article identifies and discusses the contribution of information and communication technologies (ICTs) to the technological cooperation projects of Bio-Manguinhos, a pharmaceutical manufacturer that belongs to Osvaldo Cruz Foundation (FIOCRUZ), responsible for producing vaccines, reagents and biopharmaceuticals, with priority on meeting the needs of the Brazilian public health system. It is a case study with a qualitative approach for descriptive and explanatory purposes. The data were c...

  11. Realtime Automation Networks in moVing industrial Environments

    Directory of Open Access Journals (Sweden)

    Rafael Leidinger

    2012-04-01

    Full Text Available The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT. For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology. However, it shows that especially for the AT, conven-tional technologies of office automation are unsuitable and/or not manageable. The employment of mobile ser-vices in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solu-tions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation. Emphasis will be put on the investigation and develop-ment of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network [1].

  12. Key Technologies in the Context of Future Networks: Operational and Management Requirements

    Directory of Open Access Journals (Sweden)

    Lorena Isabel Barona López

    2016-12-01

    Full Text Available The concept of Future Networks is based on the premise that current infrastructures require enhanced control, service customization, self-organization and self-management capabilities to meet the new needs in a connected society, especially of mobile users. In order to provide a high-performance mobile system, three main fields must be improved: radio, network, and operation and management. In particular, operation and management capabilities are intended to enable business agility and operational sustainability, where the addition of new services does not imply an excessive increase in capital or operational expenditures. In this context, a set of key-enabled technologies have emerged in order to aid in this field. Concepts such as Software Defined Network (SDN, Network Function Virtualization (NFV and Self-Organized Networks (SON are pushing traditional systems towards the next 5G network generation.This paper presents an overview of the current status of these promising technologies and ongoing works to fulfill the operational and management requirements of mobile infrastructures. This work also details the use cases and the challenges, taking into account not only SDN, NFV, cloud computing and SON but also other paradigms.

  13. Report on investigation in fiscal 2000 of industrial technology exchange with international networking organizations; 2000 nendo kokusaitekina network gata soshiki tono sangyo gijutsu koryu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With an objective to promote exchange of industrial technologies, investigations and analyses were made on identification of the current status of networking organizations in different countries working as windows for industrial technology exchange, and on the actual status of technology commercialization methods in overseas incubators. Activities were taken in the following three fields: 1) the current status of networking organizations and incubators in different countries, 2) typology of technology commercialization, technical fields, and success factors, and 3) possibility of the use of technology information in the networking organizations. In Item 1), investigations were performed on the current status and actual activity status of the networking organizations including research parks and individual incubators intended of information exchange, mainly in the United States, UK, and Finland. In Item 2), considerations are given on the points related to technology incubation based on the information about the networking organizations and incubators in each country, and the way the industry-academia cooperation should be. In Item 3), discussions were given on the roles of the networking organizations and the possibility of utilization of technological information in the networking organizations in Japan. (NEDO)

  14. Object-Oriented Bayesian Networks (OOBN) for Aviation Accident Modeling and Technology Portfolio Impact Assessment

    Science.gov (United States)

    Shih, Ann T.; Ancel, Ersin; Jones, Sharon M.

    2012-01-01

    The concern for reducing aviation safety risk is rising as the National Airspace System in the United States transforms to the Next Generation Air Transportation System (NextGen). The NASA Aviation Safety Program is committed to developing an effective aviation safety technology portfolio to meet the challenges of this transformation and to mitigate relevant safety risks. The paper focuses on the reasoning of selecting Object-Oriented Bayesian Networks (OOBN) as the technique and commercial software for the accident modeling and portfolio assessment. To illustrate the benefits of OOBN in a large and complex aviation accident model, the in-flight Loss-of-Control Accident Framework (LOCAF) constructed as an influence diagram is presented. An OOBN approach not only simplifies construction and maintenance of complex causal networks for the modelers, but also offers a well-organized hierarchical network that is easier for decision makers to exploit the model examining the effectiveness of risk mitigation strategies through technology insertions.

  15. Deploying 5G-technologies in smart city and smart home wireless sensor networks with interferences

    DEFF Research Database (Denmark)

    Lynggaard, Per; Skouby, Knud Erik

    2015-01-01

    interconnected infrastructure elements, to handle big-data from the smart homes, and to be compatible with existing infrastructures. The considered cognitive radio technology is based on pre-coded OFDM which offers the needed flexibility to deal with the key challenges found in the smart home networks. Thus......Deploying 5G technologies in a combination of smart homes and smart city opens for a new ecosystem with big potentials. The potentials lie in the creation of an advanced ICT infrastructure with support for connected and entangled services possibilities including technologies for efficient...

  16. Analysis of a time-lens based optical frame synchronizer and retimer for 10G Ethernet aiming at a Tb/s optical router/switch design

    DEFF Research Database (Denmark)

    Laguardia Areal, Janaina; Hu, Hao; Peucheret, Christophe

    2010-01-01

    This paper analyzes experimentally and by numerical simulations an optical frame retimer and synchronizer unit for 10 Gbit/s Ethernet input frames. The unit is envisaged to be applied in the design of an optically transparent router for Optical Time Division Multiplexed (OTDM) links, aggregating...... traffic from several 10 Gbit/s Ethernet (10 GE) links. The scheme is based on time-lenses implemented through a combination of a sinusoidally driven optical phase modulation and linear dispersion. Our analysis extracts the operation range of the scheme used for synchronization and retiming in the context...... of 10 Gbit/s Ethernet, considering the frequency offset to the local clock within the specified standard tolerance (i.e.  1 MHz for 10 Gbit/s Ethernet) and the Ethernet frame size (i.e. up to 1526 bytes). We also provide preliminary design insights to increase the operation range....

  17. Lunar Relay Satellite Network for Space Exploration: Architecture, Technologies and Challenges

    Science.gov (United States)

    Bhasin, Kul B.; Hackenberg, Anthony W.; Slywczak, Richard A.; Bose, Prasanta; Bergamo, Marcos; Hayden, Jeffrey L.

    2006-01-01

    NASA is planning a series of short and long duration human and robotic missions to explore the Moon and then Mars. A key objective of these missions is to grow, through a series of launches, a system of systems infrastructure with the capability for safe and sustainable autonomous operations at minimum cost while maximizing the exploration capabilities and science return. An incremental implementation process will enable a buildup of the communication, navigation, networking, computing, and informatics architectures to support human exploration missions in the vicinities and on the surfaces of the Moon and Mars. These architectures will support all space and surface nodes, including other orbiters, lander vehicles, humans in spacesuits, robots, rovers, human habitats, and pressurized vehicles. This paper describes the integration of an innovative MAC and networking technology with an equally innovative position-dependent, data routing, network technology. The MAC technology provides the relay spacecraft with the capability to autonomously discover neighbor spacecraft and surface nodes, establish variable-rate links and communicate simultaneously with multiple in-space and surface clients at varying and rapidly changing distances while making optimum use of the available power. The networking technology uses attitude sensors, a time synchronization protocol and occasional orbit-corrections to maintain awareness of its instantaneous position and attitude in space as well as the orbital or surface location of its communication clients. A position-dependent data routing capability is used in the communication relay satellites to handle the movement of data among any of multiple clients (including Earth) that may be simultaneously in view; and if not in view, the relay will temporarily store the data from a client source and download it when the destination client comes into view. The integration of the MAC and data routing networking technologies would enable a relay

  18. The influence of social networking technologies on female religious veil-wearing behavior in Iran.

    Science.gov (United States)

    Young, Sean D; Shakiba, Abbas; Kwok, Justin; Montazeri, Mohammad Sadegh

    2014-05-01

    Abstract Social networking technologies can influence attitudes, behaviors, and social norms. Research on this topic has been conducted primarily among early adopters of technology and within the United States. However, it is important to evaluate how social media might affect people's behaviors in international settings, especially among countries with longstanding, government recommended, cultural and religious traditions and behaviors, such as Iran. This study seeks to assess whether Iranian women who have been using social networking technologies for a longer time (compared to those who have recently joined) would be less likely to cover themselves with a veil and be more comfortable publicly displaying pictures of this behavior on Facebook. Iranian females (N=253) were selected through snowball sampling from nongovernmental organizations in November 2011 and asked to complete a survey assessing their use of Facebook, concerns about not wearing a veil in Facebook pictures, and their actual likelihood of wearing a veil. Items were combined to measure lack of interest in wearing a veil. Length of time as a Facebook user was significantly associated with not wearing a veil (b=0.16, pSocial networking technologies can affect attitudes and behaviors internationally. We discuss methods of using social media for self-presentation and expression, as well as the difficulties (and importance) of studying use of technologies, such as social media, internationally.

  19. 76 FR 28499 - Data Fortress Systems Group Ltd., Digital Youth Network Corp., Fantom Technologies, Inc., and KIK...

    Science.gov (United States)

    2011-05-17

    ... COMMISSION Data Fortress Systems Group Ltd., Digital Youth Network Corp., Fantom Technologies, Inc., and KIK Technology International, Inc., Order of Suspension of Trading May 12, 2011. It appears to the Securities and... accurate information concerning the securities of Digital Youth Network Corp. because it has not filed any...

  20. Management challenges in an information communication technology (ICT network in rural schools

    Directory of Open Access Journals (Sweden)

    Maryke Mihai

    2015-11-01

    Full Text Available This study concerns the management of an interactive whiteboard (IWB network started in April 2008 in Mpumalanga, with a leading school partnered with several disadvantaged schools, transmitting lessons in Mathematics and Science. Many educational institutions try to provide learners with better learning opportunities by equipping schools with the latest technology. The IWBs have been invested in the most and the project is very successful in bridging the urban-rural divide. Information Communication Technologies (ICTs play an important role in reforming education. This study concentrated on the key managerial challenges to leaders when faced with introducing, accepting and managing new technology in their schools. The purpose of the study was to describe the management approach that developed during the implementation of the IWB network and what possible contribution the lessons learnt from this case study could have on management theory regarding the management of ICTs in similar multi-school models.