WorldWideScience

Sample records for network interface system

  1. STIMULUS: End-System Network Interface Controller for 100 Gb/s Wide Area Networks

    Energy Technology Data Exchange (ETDEWEB)

    Zarkesh-Ha, Payman [University of New Mexico

    2014-09-12

    The main goal of this research grant is to develop a system-level solution leveraging novel technologies that enable network communications at 100 Gb/s or beyond. University of New Mexico in collaboration with Acadia Optronics LLC has been working on this project to develop the 100 Gb/s Network Interface Controller (NIC) under this Department of Energy (DOE) grant.

  2. End-System Network Interface Controller for 100 Gb/s Wide Area Networks: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Wen, Jesse [Acadia Optronics LLC, Rockville, MD (United States)

    2013-08-30

    In recent years, network bandwidth requirements have scaled multiple folds, pushing the need for the development of data exchange mechanisms at 100 Gb/s and beyond. High performance computing, climate modeling, large-scale storage, and collaborative scientific research are examples of applications that can greatly benefit by leveraging high bandwidth capabilities of the order of 100 Gb/s. Such requirements and advances in IEEE Ethernet standards, Optical Transport Unit4 (OTU4), and host-system interconnects demand a network infrastructure supporting throughput rates of the order of 100 Gb/s with a single wavelength. To address such a demand Acadia Optronics in collaboration with the University of New Mexico, proposed and developed a end-system Network Interface Controller (NIC) for the 100Gbps WANs. Acadia’s 100G NIC employs an FPGA based system with a high-performance processor interconnect (PCIe 3.0) and a high capacity optical transmission link (CXP) to provide data transmission at the rate of 100 Gbps.

  3. Effects of Energy Storage Systems Grid Code Requirements on Interface Protection Performances in Low Voltage Networks

    Directory of Open Access Journals (Sweden)

    Fabio Bignucolo

    2017-03-01

    Full Text Available The ever-growing penetration of local generation in distribution networks and the large diffusion of energy storage systems (ESSs foreseen in the near future are bound to affect the effectiveness of interface protection systems (IPSs, with negative impact on the safety of medium voltage (MV and low voltage (LV systems. With the scope of preserving the main network stability, international and national grid connection codes have been updated recently. Consequently, distributed generators (DGs and storage units are increasingly called to provide stabilizing functions according to local voltage and frequency. This can be achieved by suitably controlling the electronic power converters interfacing small-scale generators and storage units to the network. The paper focuses on the regulating functions required to storage units by grid codes currently in force in the European area. Indeed, even if such regulating actions would enable local units in participating to network stability under normal steady-state operating conditions, it is shown through dynamic simulations that they may increase the risk of unintentional islanding occurrence. This means that dangerous operating conditions may arise in LV networks in case dispersed generators and storage systems are present, even if all the end-users are compliant with currently applied connection standards.

  4. Development of Network Interface Cards for TRIDAQ systems with the NaNet framework

    Science.gov (United States)

    Ammendola, R.; Biagioni, A.; Cretaro, P.; Di Lorenzo, S.; Fiorini, M.; Frezza, O.; Lamanna, G.; Lo Cicero, F.; Lonardo, A.; Martinelli, M.; Neri, I.; Paolucci, P. S.; Pastorelli, E.; Piandani, R.; Pontisso, L.; Rossetti, D.; Simula, F.; Sozzi, M.; Valente, P.; Vicini, P.

    2017-03-01

    NaNet is a framework for the development of FPGA-based PCI Express (PCIe) Network Interface Cards (NICs) with real-time data transport architecture that can be effectively employed in TRIDAQ systems. Key features of the architecture are the flexibility in the configuration of the number and kind of the I/O channels, the hardware offloading of the network protocol stack, the stream processing capability, and the zero-copy CPU and GPU Remote Direct Memory Access (RDMA). Three NIC designs have been developed with the NaNet framework: NaNet-1 and NaNet-10 for the CERN NA62 low level trigger and NaNet3 for the KM3NeT-IT underwater neutrino telescope DAQ system. We will focus our description on the NaNet-10 design, as it is the most complete of the three in terms of capabilities and integrated IPs of the framework.

  5. Multiple network interface core apparatus and method

    Science.gov (United States)

    Underwood, Keith D [Albuquerque, NM; Hemmert, Karl Scott [Albuquerque, NM

    2011-04-26

    A network interface controller and network interface control method comprising providing a single integrated circuit as a network interface controller and employing a plurality of network interface cores on the single integrated circuit.

  6. Characterizing Design Process Interfaces as Organization Networks: Insights for Engineering Systems Management

    DEFF Research Database (Denmark)

    Ruiz, Pedro Parraguez; Eppinger, Steven; Maier, Anja

    2016-01-01

    The engineering design literature has provided guidance on how to identify and analyze design activities and their information dependencies. However, a systematic characterization of process interfaces between engineering design activities is missing, and the impact of structural and compositional...... and interpret the effect of those characteristics on interface problems. As a result, we show how structural and compositional aspects of the organization networks between information-dependent activities provide valuable insights to better manage complex engineering design processes. The proposed approach...... and organization architectures, the systematic identification of key performance metrics associated with interface problems, and improved support for engineering managers by means of a better overview of information flows between activities....

  7. Effects of Energy Storage Systems Grid Code Requirements on Interface Protection Performances in Low Voltage Networks

    National Research Council Canada - National Science Library

    Fabio Bignucolo; Alberto Cerretti; Massimiliano Coppo; Andrea Savio; Roberto Turri

    2017-01-01

    ...), with negative impact on the safety of medium voltage (MV) and low voltage (LV) systems. With the scope of preserving the main network stability, international and national grid connection codes have been updated recently...

  8. Interfacing Space Communications and Navigation Network Simulation with Distributed System Integration Laboratories (DSIL)

    Science.gov (United States)

    Jennings, Esther H.; Nguyen, Sam P.; Wang, Shin-Ywan; Woo, Simon S.

    2008-01-01

    NASA's planned Lunar missions will involve multiple NASA centers where each participating center has a specific role and specialization. In this vision, the Constellation program (CxP)'s Distributed System Integration Laboratories (DSIL) architecture consist of multiple System Integration Labs (SILs), with simulators, emulators, testlabs and control centers interacting with each other over a broadband network to perform test and verification for mission scenarios. To support the end-to-end simulation and emulation effort of NASA' exploration initiatives, different NASA centers are interconnected to participate in distributed simulations. Currently, DSIL has interconnections among the following NASA centers: Johnson Space Center (JSC), Kennedy Space Center (KSC), Marshall Space Flight Center (MSFC) and Jet Propulsion Laboratory (JPL). Through interconnections and interactions among different NASA centers, critical resources and data can be shared, while independent simulations can be performed simultaneously at different NASA locations, to effectively utilize the simulation and emulation capabilities at each center. Furthermore, the development of DSIL can maximally leverage the existing project simulation and testing plans. In this work, we describe the specific role and development activities at JPL for Space Communications and Navigation Network (SCaN) simulator using the Multi-mission Advanced Communications Hybrid Environment for Test and Evaluation (MACHETE) tool to simulate communications effects among mission assets. Using MACHETE, different space network configurations among spacecrafts and ground systems of various parameter sets can be simulated. Data that is necessary for tracking, navigation, and guidance of spacecrafts such as Crew Exploration Vehicle (CEV), Crew Launch Vehicle (CLV), and Lunar Relay Satellite (LRS) and orbit calculation data are disseminated to different NASA centers and updated periodically using the High Level Architecture (HLA). In

  9. A Literature Review on Operator Interface Technologies for Network Enabled Operational Environments Using Complex System Analysis

    Science.gov (United States)

    2009-05-30

    d’interface fondées sur le comportement et sur la psychologie , ainsi que des méthodes de conception et de mise en œuvre d’interfaces multi-agents. On a mis...réseaucentriques. Ces technologies comprennent des approches de conception d’interface fondées sur le comportement et sur la psychologie , ainsi que des

  10. UNIVERSAL INTERFACE TO MULTIPLE OPERATIONS SYSTEMS

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.

    1986-01-01

    Alternative ways to provide access to operations systems that maintain, test, and configure complex telephone networks are being explored. It is suggested that a universal interface that provides simultaneous access to multiple operations systems that execute in different hardware and software...... environments, can be provided by an architecture that is based on the separation of presentation issues from application issues and on a modular interface management system that consists of a virtual user interface, physical user interface, and interface agent. The interface functionality that is needed...

  11. Broadband network on-line data acquisition system with web based interface for control and basic analysis

    Science.gov (United States)

    Polkowski, Marcin; Grad, Marek

    2016-04-01

    Passive seismic experiment "13BB Star" is operated since mid 2013 in northern Poland and consists of 13 broadband seismic stations. One of the elements of this experiment is dedicated on-line data acquisition system comprised of both client (station) side and server side modules with web based interface that allows monitoring of network status and provides tools for preliminary data analysis. Station side is controlled by ARM Linux board that is programmed to maintain 3G/EDGE internet connection, receive data from digitizer, send data do central server among with additional auxiliary parameters like temperatures, voltages and electric current measurements. Station side is controlled by set of easy to install PHP scripts. Data is transmitted securely over SSH protocol to central server. Central server is a dedicated Linux based machine. Its duty is receiving and processing all data from all stations including auxiliary parameters. Server side software is written in PHP and Python. Additionally, it allows remote station configuration and provides web based interface for user friendly interaction. All collected data can be displayed for each day and station. It also allows manual creation of event oriented plots with different filtering abilities and provides numerous status and statistic information. Our solution is very flexible and easy to modify. In this presentation we would like to share our solution and experience. National Science Centre Poland provided financial support for this work via NCN grant DEC-2011/02/A/ST10/00284.

  12. Hydra: an Energy-efficient and Reconfigurable Network Interface

    NARCIS (Netherlands)

    van de Burgwal, M.D.; Smit, Gerardus Johannes Maria; Rauwerda, G.K.; Heysters, P.M.

    In heterogeneous tiled System-on-Chip architectures a Network-on-Chip is used to transport messages between processing elements. A reconfigurable network interface is used to connect the processing elements to the Network-on-Chip, converting the messages between both domains. This paper introduces

  13. Intelligent Tutoring Systems: Formalization as Automata and Interface Design Using Neural Networks

    Science.gov (United States)

    Curilem, S. Gloria; Barbosa, Andrea R.; de Azevedo, Fernando M.

    2007-01-01

    This article proposes a mathematical model of Intelligent Tutoring Systems (ITS), based on observations of the behaviour of these systems. One of the most important problems of pedagogical software is to establish a common language between the knowledge areas involved in their development, basically pedagogical, computing and domain areas. A…

  14. Data management and communication networks for man-machine interface system in Korea Advanced LIquid MEtal Reactor : Its functionality and design requirements

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Kyung Ho; Park, Gun Ok; Suh, Sang Moon; Kim, Jang Yeol; Kwon, Kee Choon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1998-12-31

    The DAta management and COmmunication NETworks(DACONET), which it is designed as a subsystem for Man-Machine Interface System of Korea Advanced LIquid MEtal Reactor (KALIMER MMIS) and advanced design concept is approached, is described. The DACONET has its roles of providing the real-time data transmission and communication paths between MMIS systems, providing the quality data for protection, monitoring and control of KALIMER and logging the static and dynamic behavioral data during KALIMER operation. The DACONET is characterized as the distributed real-time system architecture with high performance. Future direction, in which advanced technology is being continually applied to Man-Machine Interface System development of Nuclear Power Plants, will be considered for designing data management and communication networks of KALIMER MMIS. 9 refs., 1 fig. (Author)

  15. Design of Fault Tolerant Network Interfaces for NoCs

    DEFF Research Database (Denmark)

    Fiorin, Leandro; Micconi, Laura; Sami, Mariagiovanna

    2011-01-01

    Networks-on-Chip (NoCs) appeared as a strategy to deal with the communication requirements of complex IP-based System-on-Chips. As the complexity of designs increases and the technology scales down into the deep-submicron domain, the probability of malfunctions and failures in the NoC components...... increases. This paper focuses on the study and evaluation of techniques for increasing reliability and resilience of Network Interfaces (NIs). NIs act as interfaces between IP cores and the communication infrastructure; a faulty behavior in them could affect therefore the overall system. In this work, we...

  16. An architecture for human-network interfaces

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.

    1990-01-01

    Some of the issues (and their consequences) that arise when human-network interfaces (HNIs) are viewed from the perspective of people who use and develop them are examined. Target attributes of HNI architecture are presented. A high-level architecture model that supports the attributes is discussed...

  17. The Portals 4.0 network programming interface.

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, Brian W.; Brightwell, Ronald Brian; Pedretti, Kevin; Wheeler, Kyle Bruce; Hemmert, Karl Scott; Riesen, Rolf E.; Underwood, Keith Douglas; Maccabe, Arthur Bernard; Hudson, Trammell B.

    2012-11-01

    This report presents a specification for the Portals 4.0 network programming interface. Portals 4.0 is intended to allow scalable, high-performance network communication between nodes of a parallel computing system. Portals 4.0 is well suited to massively parallel processing and embedded systems. Portals 4.0 represents an adaption of the data movement layer developed for massively parallel processing platforms, such as the 4500-node Intel TeraFLOPS machine. Sandias Cplant cluster project motivated the development of Version 3.0, which was later extended to Version 3.3 as part of the Cray Red Storm machine and XT line. Version 4.0 is targeted to the next generation of machines employing advanced network interface architectures that support enhanced offload capabilities.

  18. The portals 4.0.1 network programming interface.

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, Brian W.; Brightwell, Ronald Brian; Pedretti, Kevin; Wheeler, Kyle Bruce; Hemmert, Karl Scott; Riesen, Rolf E.; Underwood, Keith Douglas; Maccabe, Arthur Bernard; Hudson, Trammell B.

    2013-04-01

    This report presents a specification for the Portals 4.0 network programming interface. Portals 4.0 is intended to allow scalable, high-performance network communication between nodes of a parallel computing system. Portals 4.0 is well suited to massively parallel processing and embedded systems. Portals 4.0 represents an adaption of the data movement layer developed for massively parallel processing platforms, such as the 4500-node Intel TeraFLOPS machine. Sandias Cplant cluster project motivated the development of Version 3.0, which was later extended to Version 3.3 as part of the Cray Red Storm machine and XT line. Version 4.0 is targeted to the next generation of machines employing advanced network interface architectures that support enhanced offload capabilities. 3

  19. Delphi Interface Maintenance System -

    Data.gov (United States)

    Department of Transportation — DIMS is the primary financial information system for tracking federally funded highway projects. It tracks authorizations, obligations, apportionments, allocations,...

  20. The Portals 4.1 Network Programming Interface

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, Brian; Brightwell, Ronald B.; Grant, Ryan; Hemmert, Karl Scott; Pedretti, Kevin; Wheeler, Kyle; Underwood, Keith D; Riesen, Rolf; Maccabe, Arthur B.; Hudson, Trammel

    2017-04-01

    This report presents a specification for the Portals 4 networ k programming interface. Portals 4 is intended to allow scalable, high-performance network communication betwee n nodes of a parallel computing system. Portals 4 is well suited to massively parallel processing and embedded syste ms. Portals 4 represents an adaption of the data movement layer developed for massively parallel processing platfor ms, such as the 4500-node Intel TeraFLOPS machine. Sandia's Cplant cluster project motivated the development of Version 3.0, which was later extended to Version 3.3 as part of the Cray Red Storm machine and XT line. Version 4 is tar geted to the next generation of machines employing advanced network interface architectures that support enh anced offload capabilities.

  1. Control system oriented human interface

    Energy Technology Data Exchange (ETDEWEB)

    Barale, P.; Jacobson, V.; Kilgore, R.; Rondeau, D.

    1976-11-01

    The on-line control system interface for magnet beam steering and focusing in the Bevalac is described. An Aydin model 5205B display generator was chosen. This display generator will allow the computer to completely rewrite a monitor screen in less than 50 ms and is also capable of controlling a color monitor. (PMA)

  2. High-performance parallel interface to synchronous optical network gateway

    Science.gov (United States)

    St. John, Wallace B.; DuBois, David H.

    1996-01-01

    A system of sending and receiving gateways interconnects high speed data interfaces, e.g., HIPPI interfaces, through fiber optic links, e.g., a SONET network. An electronic stripe distributor distributes bytes of data from a first interface at the sending gateway onto parallel fiber optics of the fiber optic link to form transmitted data. An electronic stripe collector receives the transmitted data on the parallel fiber optics and reforms the data into a format effective for input to a second interface at the receiving gateway. Preferably, an error correcting syndrome is constructed at the sending gateway and sent with a data frame so that transmission errors can be detected and corrected in a real-time basis. Since the high speed data interface operates faster than any of the fiber optic links the transmission rate must be adapted to match the available number of fiber optic links so the sending and receiving gateways monitor the availability of fiber links and adjust the data throughput accordingly. In another aspect, the receiving gateway must have sufficient available buffer capacity to accept an incoming data frame. A credit-based flow control system provides for continuously updating the sending gateway on the available buffer capacity at the receiving gateway.

  3. Acorn: A grid computing system for constraint based modeling and visualization of the genome scale metabolic reaction networks via a web interface

    Directory of Open Access Journals (Sweden)

    Bushell Michael E

    2011-05-01

    Full Text Available Abstract Background Constraint-based approaches facilitate the prediction of cellular metabolic capabilities, based, in turn on predictions of the repertoire of enzymes encoded in the genome. Recently, genome annotations have been used to reconstruct genome scale metabolic reaction networks for numerous species, including Homo sapiens, which allow simulations that provide valuable insights into topics, including predictions of gene essentiality of pathogens, interpretation of genetic polymorphism in metabolic disease syndromes and suggestions for novel approaches to microbial metabolic engineering. These constraint-based simulations are being integrated with the functional genomics portals, an activity that requires efficient implementation of the constraint-based simulations in the web-based environment. Results Here, we present Acorn, an open source (GNU GPL grid computing system for constraint-based simulations of genome scale metabolic reaction networks within an interactive web environment. The grid-based architecture allows efficient execution of computationally intensive, iterative protocols such as Flux Variability Analysis, which can be readily scaled up as the numbers of models (and users increase. The web interface uses AJAX, which facilitates efficient model browsing and other search functions, and intuitive implementation of appropriate simulation conditions. Research groups can install Acorn locally and create user accounts. Users can also import models in the familiar SBML format and link reaction formulas to major functional genomics portals of choice. Selected models and simulation results can be shared between different users and made publically available. Users can construct pathway map layouts and import them into the server using a desktop editor integrated within the system. Pathway maps are then used to visualise numerical results within the web environment. To illustrate these features we have deployed Acorn and created a

  4. Acorn: a grid computing system for constraint based modeling and visualization of the genome scale metabolic reaction networks via a web interface.

    Science.gov (United States)

    Sroka, Jacek; Bieniasz-Krzywiec, Lukasz; Gwóźdź, Szymon; Leniowski, Dariusz; Lącki, Jakub; Markowski, Mateusz; Avignone-Rossa, Claudio; Bushell, Michael E; McFadden, Johnjoe; Kierzek, Andrzej M

    2011-05-24

    Constraint-based approaches facilitate the prediction of cellular metabolic capabilities, based, in turn on predictions of the repertoire of enzymes encoded in the genome. Recently, genome annotations have been used to reconstruct genome scale metabolic reaction networks for numerous species, including Homo sapiens, which allow simulations that provide valuable insights into topics, including predictions of gene essentiality of pathogens, interpretation of genetic polymorphism in metabolic disease syndromes and suggestions for novel approaches to microbial metabolic engineering. These constraint-based simulations are being integrated with the functional genomics portals, an activity that requires efficient implementation of the constraint-based simulations in the web-based environment. Here, we present Acorn, an open source (GNU GPL) grid computing system for constraint-based simulations of genome scale metabolic reaction networks within an interactive web environment. The grid-based architecture allows efficient execution of computationally intensive, iterative protocols such as Flux Variability Analysis, which can be readily scaled up as the numbers of models (and users) increase. The web interface uses AJAX, which facilitates efficient model browsing and other search functions, and intuitive implementation of appropriate simulation conditions. Research groups can install Acorn locally and create user accounts. Users can also import models in the familiar SBML format and link reaction formulas to major functional genomics portals of choice. Selected models and simulation results can be shared between different users and made publically available. Users can construct pathway map layouts and import them into the server using a desktop editor integrated within the system. Pathway maps are then used to visualise numerical results within the web environment. To illustrate these features we have deployed Acorn and created a web server allowing constraint based

  5. An area-efficient network interface for a TDM-based Network-on-Chip

    DEFF Research Database (Denmark)

    Sparsø, Jens; Kasapaki, Evangelia; Schoeberl, Martin

    2013-01-01

    Network interfaces (NIs) are used in multi-core systems where they connect processors, memories, and other IP-cores to a packet switched Network-on-Chip (NOC). The functionality of a NI is to bridge between the read/write transaction interfaces used by the cores and the packet-streaming interface...... used by the routers and links in the NOC. The paper addresses the design of a NI for a NOC that uses time division multiplexing (TDM). By keeping the essence of TDM in mind, we have developed a new area-efficient NI micro-architecture. The new design completely eliminates the need for FIFO buffers...... and credit based flow control - resources which are reported to account for 50–85% of the area in existing NI designs. The paper discusses the design considerations, presents the new NI micro-architecture, and reports area figures for a range of implementations....

  6. Interorganizational Innovation in Systemic Networks

    DEFF Research Database (Denmark)

    Seemann, Janne; Dinesen, Birthe; Gustafsson, Jeppe

    2013-01-01

    that linear n-stage models by reducing complexity and flux end up focusing only on the surface of the network and are thus unable to grasp important aspects of network dynamics. The paper suggests that there is a need for a more dynamic innovation model able to grasp the whole picture of dynamics in systemic...... patients with chronic obstructive pulmonary disease (COPD) to avoid readmission, perform self monitoring and to maintain rehabilitation in their homes. The aim of the paper is to identify, analyze and discuss innovation dynamics in the COPD network and on a preliminary basis to identify implications...... for managing innovations in systemic networks. The main argument of this paper is that innovation dynamics in systemic networks should be understood as a complex interplay of four logics: 1) Fragmented innovation, 2) Interface innovation, 3) Competing innovation, 4) Co-innovation. The findings indicate...

  7. Deep Space Network (DSN), Network Operations Control Center (NOCC) computer-human interfaces

    Science.gov (United States)

    Ellman, Alvin; Carlton, Magdi

    1993-01-01

    The Network Operations Control Center (NOCC) of the DSN is responsible for scheduling the resources of DSN, and monitoring all multi-mission spacecraft tracking activities in real-time. Operations performs this job with computer systems at JPL connected to over 100 computers at Goldstone, Australia and Spain. The old computer system became obsolete, and the first version of the new system was installed in 1991. Significant improvements for the computer-human interfaces became the dominant theme for the replacement project. Major issues required innovating problem solving. Among these issues were: How to present several thousand data elements on displays without overloading the operator? What is the best graphical representation of DSN end-to-end data flow? How to operate the system without memorizing mnemonics of hundreds of operator directives? Which computing environment will meet the competing performance requirements? This paper presents the technical challenges, engineering solutions, and results of the NOCC computer-human interface design.

  8. Energy-Efficient Communication in Multi-interface Wireless Networks

    Science.gov (United States)

    Athanassopoulos, Stavros; Caragiannis, Ioannis; Kaklamanis, Christos; Papaioannou, Evi

    We study communication problems in wireless networks supporting multiple interfaces. In such networks, two nodes can communicate if they are close and share a common interface. The activation of each interface has a cost reflecting the energy consumed when a node uses this interface. We distinguish between the symmetric and non-symmetric case, depending on whether all nodes have the same activation cost for each interface or not. For the symmetric case, we present a (3/2 + ɛ)-approximation algorithm for the problem of achieving connectivity with minimum activation cost, improving a previous bound of 2. For the non-symmetric case, we show that the connectivity problem is not approximable within a sublogarithmic factor in the number of nodes and present a logarithmic approximation algorithm for a more general problem that models group communication.

  9. Flexible Transport Network Expansion via Open WDM Interfaces

    DEFF Research Database (Denmark)

    Fagertun, Anna Manolova; Skjoldstrup, Bjarke

    2013-01-01

    This paper presents a successful test-bed implementation of a multi-vendor transport network interconnection via open WDM interfaces. The concept of applying Alien Wavelengths (AWs) for network expansion was successfully illustrated via deployment of multi-domain/multi-vendor end-to-end OTN...

  10. Interfacing Network Simulations and Empirical Data

    Science.gov (United States)

    2009-05-01

    appropriate. The quadratic assignment procedure ( QAP ) (Krackhardt, 1987) could be used to compare the correlation between networks; however, the...Social roles and the evolution of networks in extreme and isolated environments. Mathematical Sociology, 27: 89-121. Krackhardt, D. (1987). QAP

  11. HealthFace: A web-based remote monitoring interface for medical healthcare systems based on a wireless body area sensor network

    OpenAIRE

    KIRBAŞ, İsmail; BAYILMIŞ, Cüneyt

    2012-01-01

    The wireless body area sensor network (WBASN) is a type of wireless sensor network. The wireless sensor nodes in a WBASN are placed on, near, or within a human body. In a medical healthcare system, WBASNs continuously provide healthcare monitoring, especially of elderly or ill people, wherever the patient goes. Wireless nodes sense and process human vital signs such as heart rate, blood pressure, body temperature, and respiration. They then send collected data to a medical center v...

  12. X window system based user interface in radiology.

    Science.gov (United States)

    Heinilä, J; Yliaho, J; Ahonen, J; Viitanen, J; Kormano, M

    1994-05-01

    A teleradiology system was designed for image transfer between two hospitals. One of the main challenges of the work was the user interface, which was to be easy to operate and to learn, and was equipped with useful functions for image manipulation and diagnosing. The software tools used were the Unix operating system (HP-UX v.7.0), C programming language and the X Window System (or simply X). The graphical user interface (GUI) was based on OSF-Motif standard, and it was developed by using the HP-Interface Architect. Both OSF-Motif and HP-Interface Architect are based on X. The results of the development project were installed for clinical use in the Turku University Central Hospital. The work demonstrates, that the X Window System has useful and advantageous features for radiology department's computer network environment.

  13. Interface Evaluation for Open System Architectures

    Science.gov (United States)

    2014-03-01

    information protection level ( IPL ) required for connected systems. Utilization of an open interface implies that a willingness to share information about...the interface exists. An inverse relationship between the IPL and the value of an open interface exists. As the IPL of connected systems increases...unclassified IPL . The minimum value is associated with a compartmentalized top secret IPL . The IPL scale is shown in Table 10. Information

  14. Graphical user interface for wireless sensor networks simulator

    Science.gov (United States)

    Paczesny, Tomasz; Paczesny, Daniel; Weremczuk, Jerzy

    2008-01-01

    Wireless Sensor Networks (WSN) are currently very popular area of development. It can be suited in many applications form military through environment monitoring, healthcare, home automation and others. Those networks, when working in dynamic, ad-hoc model, need effective protocols which must differ from common computer networks algorithms. Research on those protocols would be difficult without simulation tool, because real applications often use many nodes and tests on such a big networks take much effort and costs. The paper presents Graphical User Interface (GUI) for simulator which is dedicated for WSN studies, especially in routing and data link protocols evaluation.

  15. Human-system Interfaces for Automatic Systems

    Energy Technology Data Exchange (ETDEWEB)

    OHara, J.M.; Higgins,J. (BNL); Fleger, S.; Barnes V. (NRC)

    2010-11-07

    Automation is ubiquitous in modern complex systems, and commercial nuclear- power plants are no exception. Automation is applied to a wide range of functions including monitoring and detection, situation assessment, response planning, and response implementation. Automation has become a 'team player' supporting personnel in nearly all aspects of system operation. In light of its increasing use and importance in new- and future-plants, guidance is needed to conduct safety reviews of the operator's interface with automation. The objective of this research was to develop such guidance. We first characterized the important HFE aspects of automation, including six dimensions: levels, functions, processes, modes, flexibility, and reliability. Next, we reviewed literature on the effects of all of these aspects of automation on human performance, and on the design of human-system interfaces (HSIs). Then, we used this technical basis established from the literature to identify general principles for human-automation interaction and to develop review guidelines. The guidelines consist of the following seven topics: automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration. In addition, our study identified several topics for additional research.

  16. Lusophone Interfaces: The Lusophone Network on Facebook

    Directory of Open Access Journals (Sweden)

    Inês Amaral

    2016-11-01

    Full Text Available This article examines the new digital landscape postulated in the network society theory advocated by Castells (2000, as well as a contextual framework. Assuming the virtual exists and produces effects (Lévy, 2001, we consider that we are witnessing a change of paradigm in social communication. If from a Communication point of view we are facing individualisation, the social paradigm shift is evident. The new perspective inculcated by digital tools is the socialisation and the maximisation of the collective. In this article, we assume that the relational ties in asymmetric social networks (which do not involve reciprocity between nodes that take place in social media platforms is content. In this sense, and taking a multidisciplinary perspective, we consider that the technique of appropriation shows a mapping of structures that are technically mediated interactions and enhanced by technology. We present an empirical study based on the method of triangulation, crossing document analysis with netnography. Analysing groups and Facebook pages as supports, where communication is recontextualised through disaggregated distribution and different types of interaction, we aim to categorise and understand the social representations of the Lusophone. The main objective of this paper is to examine whether Facebook, as an area of digitally mediated interactions and disaggregate content sharing, can induce a reconstruction of the significance of social networks and representations of the Lusophone, promoting the creation of a single social group, or at least a grouping with some homogeneity.

  17. On Building a Search Interface Discovery System

    Science.gov (United States)

    Shestakov, Denis

    A huge portion of the Web known as the deep Web is accessible via search interfaces to myriads of databases on the Web. While relatively good approaches for querying the contents of web databases have been recently proposed, one cannot fully utilize them having most search interfaces unlocated. Thus, the automatic recognition of search interfaces to online databases is crucial for any application accessing the deep Web. This paper describes the architecture of the I-Crawler, a system for finding and classifying search interfaces. The I-Crawler is intentionally designed to be used in the deep web characterization surveys and for constructing directories of deep web resources.

  18. Computer network defense system

    Science.gov (United States)

    Urias, Vincent; Stout, William M. S.; Loverro, Caleb

    2017-08-22

    A method and apparatus for protecting virtual machines. A computer system creates a copy of a group of the virtual machines in an operating network in a deception network to form a group of cloned virtual machines in the deception network when the group of the virtual machines is accessed by an adversary. The computer system creates an emulation of components from the operating network in the deception network. The components are accessible by the group of the cloned virtual machines as if the group of the cloned virtual machines was in the operating network. The computer system moves network connections for the group of the virtual machines in the operating network used by the adversary from the group of the virtual machines in the operating network to the group of the cloned virtual machines, enabling protecting the group of the virtual machines from actions performed by the adversary.

  19. Architecting Communication Network of Networks for Space System of Systems

    Science.gov (United States)

    Bhasin, Kul B.; Hayden, Jeffrey L.

    2008-01-01

    The National Aeronautics and Space Administration (NASA) and the Department of Defense (DoD) are planning Space System of Systems (SoS) to address the new challenges of space exploration, defense, communications, navigation, Earth observation, and science. In addition, these complex systems must provide interoperability, enhanced reliability, common interfaces, dynamic operations, and autonomy in system management. Both NASA and the DoD have chosen to meet the new demands with high data rate communication systems and space Internet technologies that bring Internet Protocols (IP), routers, servers, software, and interfaces to space networks to enable as much autonomous operation of those networks as possible. These technologies reduce the cost of operations and, with higher bandwidths, support the expected voice, video, and data needed to coordinate activities at each stage of an exploration mission. In this paper, we discuss, in a generic fashion, how the architectural approaches and processes are being developed and used for defining a hypothetical communication and navigation networks infrastructure to support lunar exploration. Examples are given of the products generated by the architecture development process.

  20. The Networking of Interactive Bibliographic Retrieval Systems.

    Science.gov (United States)

    Marcus, Richard S.; Reintjes, J. Francis

    Research in networking of heterogeneous interactive bibliographic retrieval systems is being conducted which centers on the concept of a virtual retrieval system. Such a virtual system would be created through a translating computer interface that would provide access to the different retrieval systems and data bases in a uniform and convenient…

  1. Network operating system

    Science.gov (United States)

    1985-01-01

    Long-term and short-term objectives for the development of a network operating system for the Space Station are stated. The short-term objective is to develop a prototype network operating system for a 100 megabit/second fiber optic data bus. The long-term objective is to establish guidelines for writing a detailed specification for a Space Station network operating system. Major milestones are noted. Information is given in outline form.

  2. An interface from LabVIEW to the accelerator controls NETwork

    Energy Technology Data Exchange (ETDEWEB)

    Blokland, W. (Fermi National Accelerator Laboratory, P.O. Box 500, Batavia, IL 60510 (United States))

    1992-07-10

    An interface from the graphical programming language LabVIEW to the Fermilab control system has been created according to the Accelerator Controls NETwork (Acnet) protocol. Using LabVIEW's signal processing capabilities in combination with the VXI crate, a powerful and user-friendly instrumentation platform is made accessible.

  3. A Universal Intelligent System-on-Chip Based Sensor Interface

    Directory of Open Access Journals (Sweden)

    Gabriele Ferri

    2010-08-01

    Full Text Available The need for real-time/reliable/low-maintenance distributed monitoring systems, e.g., wireless sensor networks, has been becoming more and more evident in many applications in the environmental, agro-alimentary, medical, and industrial fields. The growing interest in technologies related to sensors is an important indicator of these new needs. The design and the realization of complex and/or distributed monitoring systems is often difficult due to the multitude of different electronic interfaces presented by the sensors available on the market. To address these issues the authors propose the concept of a Universal Intelligent Sensor Interface (UISI, a new low-cost system based on a single commercial chip able to convert a generic transducer into an intelligent sensor with multiple standardized interfaces. The device presented offers a flexible analog and/or digital front-end, able to interface different transducer typologies (such as conditioned, unconditioned, resistive, current output, capacitive and digital transducers. The device also provides enhanced processing and storage capabilities, as well as a configurable multi-standard output interface (including plug-and-play interface based on IEEE 1451.3. In this work the general concept of UISI and the design of reconfigurable hardware are presented, together with experimental test results validating the proposed device.

  4. A universal intelligent system-on-chip based sensor interface.

    Science.gov (United States)

    Mattoli, Virgilio; Mondini, Alessio; Mazzolai, Barbara; Ferri, Gabriele; Dario, Paolo

    2010-01-01

    The need for real-time/reliable/low-maintenance distributed monitoring systems, e.g., wireless sensor networks, has been becoming more and more evident in many applications in the environmental, agro-alimentary, medical, and industrial fields. The growing interest in technologies related to sensors is an important indicator of these new needs. The design and the realization of complex and/or distributed monitoring systems is often difficult due to the multitude of different electronic interfaces presented by the sensors available on the market. To address these issues the authors propose the concept of a Universal Intelligent Sensor Interface (UISI), a new low-cost system based on a single commercial chip able to convert a generic transducer into an intelligent sensor with multiple standardized interfaces. The device presented offers a flexible analog and/or digital front-end, able to interface different transducer typologies (such as conditioned, unconditioned, resistive, current output, capacitive and digital transducers). The device also provides enhanced processing and storage capabilities, as well as a configurable multi-standard output interface (including plug-and-play interface based on IEEE 1451.3). In this work the general concept of UISI and the design of reconfigurable hardware are presented, together with experimental test results validating the proposed device.

  5. Low Cost Network Emulator with Ethernet and E1 Interfaces

    Directory of Open Access Journals (Sweden)

    Zbynek Kocur

    2010-01-01

    Full Text Available Contemporary Next Generation Networks (NGN are mainly built on the Internet Protocol (IP and Ethernet. Major challenge for emerging types of wired and wireless IP-based networks is to provide an adequate Quality of Service (QoS for different services. The quality of evaluation requires a detailed knowledge of the performance requirements for particular services and applications. The paper is primarily oriented to the end-to-end testing for the Ethernet-based terminal equipment. The low cost Ethernet network emulator was developed on the Department of Telecommunication Technology of the Faculty of Electrical Engineering of the Czech Technical University in Prague. The extension for emulation network with the E1 interfaces and TDM over IP transmission can be used with external converters.

  6. Evaluation of Explanation Interfaces in Recommender Systems

    Directory of Open Access Journals (Sweden)

    Sergio Cleger-Tamayo

    2017-05-01

    Full Text Available Explaining interfaces become a useful tool in systems that have a lot of content to evaluate by users. The different interfaces represent a help for the undecided users or those who consider systems as boxed black smart. These systems present recommendations to users based on different learning models. In this paper, we present the different objectives of the explanation interfaces and some of the criteria that you can evaluate, as well as a proposal of metrics to obtain results in the experiments. Finally, we showed the main results of a study with real users and their interaction with e-commerce systems. Among the main results, highlight the positive impact in relation to the time of interaction with the applications and acceptance of the recommendations received.

  7. Software-defined network abstractions and configuration interfaces for building programmable quantum networks

    Energy Technology Data Exchange (ETDEWEB)

    Dasari, Venkat [U.S. Army Research Laboratory, Aberdeen Proving Ground, MD; Sadlier, Ronald J [ORNL; Geerhart, Mr. Billy [U.S. Army Research Laboratory, Aberdeen Proving Ground, MD; Snow, Nikolai [U.S. Army Research Laboratory, Aberdeen Proving Ground, MD; Williams, Brian P [ORNL; Humble, Travis S [ORNL

    2017-01-01

    Well-defined and stable quantum networks are essential to realize functional quantum applications. Quantum networks are complex and must use both quantum and classical channels to support quantum applications like QKD, teleportation, and superdense coding. In particular, the no-cloning theorem prevents the reliable copying of quantum signals such that the quantum and classical channels must be highly coordinated using robust and extensible methods. We develop new network abstractions and interfaces for building programmable quantum networks. Our approach leverages new OpenFlow data structures and table type patterns to build programmable quantum networks and to support quantum applications.

  8. Uniform Interfaces for Distributed Systems.

    Science.gov (United States)

    1980-05-01

    Also TER 051.3, Reseau Cyclades. 66] R.A. Faneuf. The National Software Works: Operational issues in a distributed processing system. Proc. National...editor. Distributed Systems Architecture and Implementation: An Advanced Course. To be published by Springer-Verlag. Also Lecture Notes, Institut fuer

  9. A small low-power networked and versatile sensor interface

    Science.gov (United States)

    Vincent, Peter S.; McMahon, Phillip J.; Muscat, Richard F.; Zeve, Ladislav; Wilson, Alan R.

    2007-01-01

    Defence Science and Technology Organisation (DSTO) has developed a low power RS485 sensor network that can be hardware configured at design time from a number of modules, depending on its final application. The core predesigned module includes network communications, microprocessor control and digital input/output. A number of analogue sensor interface modules can easily be added to this core. In addition, the software is also of modular design consisting of a set of core operating routines and a set of routines for controlling sensor operations that can be downloaded or upgraded in the field. Prime consideration in this development has been given to the need for small size, low weight, low power and versatility of operation. The hardware is based around the Texas Instruments MSP430® micro-controller. This paper will present some of the considerations leading to the design and examples of applications of the sensor network.

  10. Triangulation positioning system network

    Directory of Open Access Journals (Sweden)

    Sfendourakis Marios

    2017-01-01

    Full Text Available This paper presents ongoing work on localization and positioning through triangulation procedure for a Fixed Sensors Network - FSN.The FSN has to work as a system.As the triangulation problem becomes high complicated in a case with large numbers of sensors and transmitters, an adequate grid topology is needed in order to tackle the detection complexity.For that reason a Network grid topology is presented and areas that are problematic and need further analysis are analyzed.The Network System in order to deal with problems of saturation and False Triangulations - FTRNs will have to find adequate methods in every sub-area of the Area Of Interest - AOI.Also, concepts like Sensor blindness and overall Network blindness, are presented. All these concepts affect the Network detection rate and its performance and ought to be considered in a way that the network overall performance won’t be degraded.Network performance should be monitored contentiously, with right algorithms and methods.It is also shown that as the number of TRNs and FTRNs is increased Detection Complexity - DC is increased.It is hoped that with further research all the characteristics of a triangulation system network for positioning will be gained and the system will be able to perform autonomously with a high detection rate.

  11. RoboCon: Operator interface for robotic applications. Final report: RoboCon electrical interfacing -- system architecture, and Interfacing NDDS and LabView

    Energy Technology Data Exchange (ETDEWEB)

    Schempf, H.

    1998-04-30

    The first appendix contains detailed specifications of the electrical interfacing employed in Robocon. This includes all electrical signals and power requirement descriptions up to and including the interface entry points for external robots and systems. The reader is first presented with an overview of the overall Robocon electrical system, followed by sub-sections describing each module in detail. The appendices contain listings of power requirements and the electrical connectors and cables used, followed by an overall electrical system diagram. Custom electronics employed are also described. The Network Data Delivery Service (NDDS) is a real-time dissemination communications architecture which allows nodes on a network to publish data and subscribe to data published by other nodes while remaining anonymous. The second appendix explains how to facilitate a seamless interface between NDDS and LabView and provides sample source code used to implement an NDDS consumer which writes a string to a socket.

  12. Wireless network interface energy consumption implications of popular streaming formats

    Science.gov (United States)

    Chandra, Surendar

    2001-12-01

    With the proliferation of mobile streaming multimedia, available battery capacity constrains the end-user experience. Since streaming applications tend to be long running, wireless network interface card's (WNIC) energy consumption is particularly an acute problem. In this work, we explore the WNIC energy consumption implications of popular multimedia streaming formats from Microsoft (Windows media), Real (Real media) and Apple (Quick Time). We investigate the energy consumption under varying stream bandwidth and network loss rates. We also explore history-based client-side strategies to reduce the energy consumed by transitioning the WNICs to a lower power consuming sleep state. We show that Microsoft media tends to transmit packets at regular intervals; streams optimized for 28.8 Kbps can save over 80% in energy consumption with 2% data loss. A high bandwidth stream (768 Kbps) can still save 57% in energy consumption with less than 0.3% data loss. For high bandwidth streams, Microsoft media exploits network-level packet fragmentation, which can lead to excessive packet loss (and wasted energy) in a lossy network. Real stream packets tend to be sent closer to each other, especially at higher bandwidths. Quicktime packets sometimes arrive in quick succession; most likely an application level fragmentation mechanism. Such packets are harder to predict at the network level without understanding the packet semantics.

  13. Garden Banks 388 ROV interface systems

    Energy Technology Data Exchange (ETDEWEB)

    Granhaug, O.; Brewster, D.; Soliah, J.; Dubea, C.

    1995-12-31

    ROV systems integration has become an important part of the planning and implementation of deep water field development. This paper provides an overview of the GB 388 subsea development project and describes the ROV interface systems in use on the various subsea production components. The paper continues with an account of the purpose-built ROV system developed for the project. Finally, the paper describes in some detail the specialized ROV tooling and intervention systems that have been developed to assist in the installation, operation and maintenance of the subsea production equipment. The subsea intervention solutions developed for the GB 388 development project have direct application to all deep water field development projects. ROV interface systems are an integral part of current and future subsea completion technology.

  14. Research on e-commerce transaction networks using multi-agent modelling and open application programming interface

    Science.gov (United States)

    Piao, Chunhui; Han, Xufang; Wu, Harris

    2010-08-01

    We provide a formal definition of an e-commerce transaction network. Agent-based modelling is used to simulate e-commerce transaction networks. For real-world analysis, we studied the open application programming interfaces (APIs) from eBay and Taobao e-commerce websites and captured real transaction data. Pajek is used to visualise the agent relationships in the transaction network. We derived one-mode networks from the transaction network and analysed them using degree and betweenness centrality. Integrating multi-agent modelling, open APIs and social network analysis, we propose a new way to study large-scale e-commerce systems.

  15. PyNN: A Common Interface for Neuronal Network Simulators

    Science.gov (United States)

    Davison, Andrew P.; Brüderle, Daniel; Eppler, Jochen; Kremkow, Jens; Muller, Eilif; Pecevski, Dejan; Perrinet, Laurent; Yger, Pierre

    2008-01-01

    Computational neuroscience has produced a diversity of software for simulations of networks of spiking neurons, with both negative and positive consequences. On the one hand, each simulator uses its own programming or configuration language, leading to considerable difficulty in porting models from one simulator to another. This impedes communication between investigators and makes it harder to reproduce and build on the work of others. On the other hand, simulation results can be cross-checked between different simulators, giving greater confidence in their correctness, and each simulator has different optimizations, so the most appropriate simulator can be chosen for a given modelling task. A common programming interface to multiple simulators would reduce or eliminate the problems of simulator diversity while retaining the benefits. PyNN is such an interface, making it possible to write a simulation script once, using the Python programming language, and run it without modification on any supported simulator (currently NEURON, NEST, PCSIM, Brian and the Heidelberg VLSI neuromorphic hardware). PyNN increases the productivity of neuronal network modelling by providing high-level abstraction, by promoting code sharing and reuse, and by providing a foundation for simulator-agnostic analysis, visualization and data-management tools. PyNN increases the reliability of modelling studies by making it much easier to check results on multiple simulators. PyNN is open-source software and is available from http://neuralensemble.org/PyNN. PMID:19194529

  16. PyNN: a common interface for neuronal network simulators

    Directory of Open Access Journals (Sweden)

    Andrew P Davison

    2009-01-01

    Full Text Available Computational neuroscience has produced a diversity of software for simulations of networks of spiking neurons, with both negative and positive consequences. On the one hand, each simulator uses its own programming or configuration language, leading to considerable difficulty in porting models from one simulator to another. This impedes communication between investigators and makes it harder to reproduce and build on the work of others. On the other hand, simulation results can be cross-checked between different simulators, giving greater confidence in their correctness, and each simulator has different optimizations, so the most appropriate simulator can be chosen for a given modelling task. A common programming interface to multiple simulators would reduce or eliminate the problems of simulator diversity while retaining the benefits. PyNN is such an interface, making it possible to write a simulation script once, using the Python programming language, and run it without modification on any supported simulator (currently NEURON, NEST, PCSIM, Brian and the Heidelberg VLSI neuromorphic hardware. PyNN increases the productivity of neuronal network modelling by providing high-level abstraction, by promoting code sharing and reuse, and by providing a foundation for simulator-agnostic analysis, visualization, and data-management tools. PyNN increases the reliability of modelling studies by making it much easier to check results on multiple simulators. PyNN is open-source software and is available from http://neuralensemble.org/PyNN.

  17. Global Terrestrial Network for Glaciers: Databases and Web interfaces

    Science.gov (United States)

    Raup, B.; Armstrong, R.; Fetterer, F.; Gartner-Roer, I.; Haeberli, W.; Hoelzle, M.; Khalsa, S. J. S.; Nussbaumer, S.; Weaver, R.; Zemp, M.

    2012-04-01

    The Global Terrestrial Network for Glaciers (GTN-G) is an umbrella organization with links to the Global Climate Observing System (GCOS), Global Terrestrial Observing System (GTOS), and UNESCO (all organizations under the United Nations), for the curation of several glacier-related databases. It is composed of the World Glacier Monitoring Service (WGMS), the U.S. National Snow and Ice Data Center (NSIDC), and the Global Land Ice Measurements from Space (GLIMS) initiative. The glacier databases include the World Glacier Inventory (WGI), the GLIMS Glacier Database, the Glacier Photograph Collection at NSIDC, and the Fluctuations of Glaciers (FoG) and Mass Balance databases at WGMS. We are working toward increased interoperability between these related databases. For example, the Web interface to the GLIMS Glacier Database has also included queryable layers for the WGI and FoG databases since 2008. To improve this further, we have produced a new GTN-G web portal (http://www.gtn-g.org/), which includes a glacier metadata browsing application. This web application allows the browsing of the metadata behind the main GTN-G databases, as well as querying the metadata in order to get to the source, no matter which database holds the data in question. A new glacier inventory, called the Randolph Glacier Inventory 1.0, has recently been compiled. This compilation, which includes glacier outlines that do not have the attributes or IDs or links to other data like the GLIMS data do, was motivated by the tight deadline schedule of the sea level chapter of the Fifth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC). Now served from the GLIMS website (http://glims.org/), it is designed to serve that narrowly focused research goal in the near term, and in the longer term will be incorporated into the multi-temporal glacier database of GLIMS. For the required merging of large sets of glacier outlines and association of proper IDs that tie together outlines

  18. Network systems security analysis

    Science.gov (United States)

    Yilmaz, Ä.°smail

    2015-05-01

    Network Systems Security Analysis has utmost importance in today's world. Many companies, like banks which give priority to data management, test their own data security systems with "Penetration Tests" by time to time. In this context, companies must also test their own network/server systems and take precautions, as the data security draws attention. Based on this idea, the study cyber-attacks are researched throughoutly and Penetration Test technics are examined. With these information on, classification is made for the cyber-attacks and later network systems' security is tested systematically. After the testing period, all data is reported and filed for future reference. Consequently, it is found out that human beings are the weakest circle of the chain and simple mistakes may unintentionally cause huge problems. Thus, it is clear that some precautions must be taken to avoid such threats like updating the security software.

  19. Design and implementation of interface units for high speed fiber optics local area networks and broadband integrated services digital networks

    Science.gov (United States)

    Tobagi, Fouad A.; Dalgic, Ismail; Pang, Joseph

    1990-01-01

    The design and implementation of interface units for high speed Fiber Optic Local Area Networks and Broadband Integrated Services Digital Networks are discussed. During the last years, a number of network adapters that are designed to support high speed communications have emerged. This approach to the design of a high speed network interface unit was to implement package processing functions in hardware, using VLSI technology. The VLSI hardware implementation of a buffer management unit, which is required in such architectures, is described.

  20. A System of Systems Interface Hazard Analysis Technique

    Science.gov (United States)

    2007-03-01

    16 Table 2. HAZOP Process ................................................................................. 21...Table 3. HAZOP Guide Words for Software or System Interface Analysis....... 22 Table 4. Example System of Systems Architecture Table...analysis techniques.28 c. Hazards and Operability Analysis Hazards and Operability ( HAZOP ) Analysis applies a systematic exploration of system

  1. Systems and methods for monitoring a solid-liquid interface

    Science.gov (United States)

    Stoddard, Nathan G; Lewis, Monte A.; Clark, Roger F

    2013-06-11

    Systems and methods are provided for monitoring a solid-liquid interface during a casting process. The systems and methods enable determination of the location of a solid-liquid interface during the casting process.

  2. Low-power, transparent optical network interface for high bandwidth off-chip interconnects.

    Science.gov (United States)

    Liboiron-Ladouceur, Odile; Wang, Howard; Garg, Ajay S; Bergman, Keren

    2009-04-13

    The recent emergence of multicore architectures and chip multiprocessors (CMPs) has accelerated the bandwidth requirements in high-performance processors for both on-chip and off-chip interconnects. For next generation computing clusters, the delivery of scalable power efficient off-chip communications to each compute node has emerged as a key bottleneck to realizing the full computational performance of these systems. The power dissipation is dominated by the off-chip interface and the necessity to drive high-speed signals over long distances. We present a scalable photonic network interface approach that fully exploits the bandwidth capacity offered by optical interconnects while offering significant power savings over traditional E/O and O/E approaches. The power-efficient interface optically aggregates electronic serial data streams into a multiple WDM channel packet structure at time-of-flight latencies. We demonstrate a scalable optical network interface with 70% improvement in power efficiency for a complete end-to-end PCI Express data transfer.

  3. Desirable Elements for a Particle System Interface

    Directory of Open Access Journals (Sweden)

    Daniel Schroeder

    2014-01-01

    Full Text Available Particle systems have many applications, with the most popular being to produce special effects in video games and films. To permit particle systems to be created quickly and easily, Particle System Interfaces (PSIs have been developed. A PSI is a piece of software designed to perform common tasks related to particle systems for clients, while providing them with a set of parameters whose values can be adjusted to create different particle systems. Most PSIs are inflexible, and when clients require functionality that is not supported by the PSI they are using, they are forced to either find another PSI that meets their requirements or, more commonly, create their own particle system or PSI from scratch. This paper presents three original contributions. First, it identifies 18 features that a PSI should provide in order to be capable of creating diverse effects. If these features are implemented in a PSI, clients will be more likely to be able to accomplish all desired effects related to particle systems with one PSI. Secondly, it introduces a novel use of events to determine, at run time, which particle system code to execute in each frame. Thirdly, it describes a software architecture called the Dynamic Particle System Framework (DPSF. Simulation results show that DPSF possesses all 18 desirable features.

  4. Federating resources of information systems: browsing interface (FRISBI)

    NARCIS (Netherlands)

    Malchanau, A.V.; van der Vet, P.E.; Roosendaal, Hans E.; de Bra, P.M.E.

    2003-01-01

    Designing the user interface of a federated system (what we call a browsing interface) must consider the knowledge gap that exists between desires of the users and the needs the systems are built to support. The concept of Habitable Interfaces aims to bridge the knowledge gap by providing kinds of

  5. Bringing Control System User Interfaces to the Web

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xihui [ORNL; Kasemir, Kay [ORNL

    2013-01-01

    With the evolution of web based technologies, especially HTML5 [1], it becomes possible to create web-based control system user interfaces (UI) that are cross-browser and cross-device compatible. This article describes two technologies that facilitate this goal. The first one is the WebOPI [2], which can seamlessly display CSS BOY [3] Operator Interfaces (OPI) in web browsers without modification to the original OPI file. The WebOPI leverages the powerful graphical editing capabilities of BOY and provides the convenience of re-using existing OPI files. On the other hand, it uses generic JavaScript and a generic communication mechanism between the web browser and web server. It is not optimized for a control system, which results in unnecessary network traffic and resource usage. Our second technology is the WebSocket-based Process Data Access (WebPDA) [4]. It is a protocol that provides efficient control system data communication using WebSocket [5], so that users can create web-based control system UIs using standard web page technologies such as HTML, CSS and JavaScript. WebPDA is control system independent, potentially supporting any type of control system.

  6. Network operating system

    Science.gov (United States)

    Perotto, E.

    1987-08-01

    The Network Operating System is an addition to CMS designed to allow multitasking operation, while conserving all the facilities of CMS: file system, interactivity, high level language environment. Multitasking is useful for server virtual machines, e.g. Network Transport Managers, File Managers, Disk space Managers, Tape Unit Managers, where the execution of a task involves long waits due to I/O completion, VCMF communication delays or human responses, during which the task status stays as a control block in memory, while the virtual machine serves other users executing the same lines of code. Multitasking is not only for multi-user service: a big data reduction program may run as a main task, while a side task, connected to the virtual console, gives reports on the ongoing work of the main task in response to user commands and steers the main task through common data. All the service routines (Wait, Create and Delete Task, Get and Release Buffer, VMCF Open and Close Link, Send and Receive, I/O and Console Routines) are FORTRAN callable, and may be used from any language environment consistent with the same parameter passing conventions. The outstanding feature of this system is efficiency, no user defined SVC are used, and the use of other privileged instructions as LPSW or SSM is the bare necessary, so that CP (with the associated overhead) is not too involved. System code and read-only data are write-protected with a different storage key from CMS and user program.

  7. A replica exchange transition interface sampling method with multiple interface sets for investigating networks of rare events

    NARCIS (Netherlands)

    Swenson, D.W.H.; Bolhuis, P.G.

    2014-01-01

    The multiple state transition interface sampling (TIS) framework in principle allows the simulation of a large network of complex rare event transitions, but in practice suffers from convergence problems. To improve convergence, we combine multiple state TIS [J. Rogal and P. G. Bolhuis, J. Chem.

  8. Computer Networks A Systems Approach

    CERN Document Server

    Peterson, Larry L

    2011-01-01

    This best-selling and classic book teaches you the key principles of computer networks with examples drawn from the real world of network and protocol design. Using the Internet as the primary example, the authors explain various protocols and networking technologies. Their systems-oriented approach encourages you to think about how individual network components fit into a larger, complex system of interactions. Whatever your perspective, whether it be that of an application developer, network administrator, or a designer of network equipment or protocols, you will come away with a "big pictur

  9. The web-based user interface for EAST plasma control system

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, R.R., E-mail: rrzhang@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Anhui (China); Xiao, B.J. [Institute of Plasma Physics, Chinese Academy of Sciences, Anhui (China); School of Nuclear Science and Technology, University of Science and Technology of China, Anhui (China); Yuan, Q.P. [Institute of Plasma Physics, Chinese Academy of Sciences, Anhui (China); Yang, F. [Institute of Plasma Physics, Chinese Academy of Sciences, Anhui (China); Department of Computer Science, Anhui Medical University, Anhui (China); Zhang, Y. [Institute of Plasma Physics, Chinese Academy of Sciences, Anhui (China); Johnson, R.D.; Penaflor, B.G. [General Atomics, DIII-D National Fusion Facility, San Diego, CA (United States)

    2014-05-15

    The plasma control system (PCS) plays a vital role at EAST for fusion science experiments. Its software application consists of two main parts: an IDL graphical user interface for setting a large number of plasma parameters to specify each discharge, several programs for performing the real-time feedback control and managing the whole control system. The PCS user interface can be used from any X11 Windows client with privileged access to the PCS computer system. However, remote access to the PCS system via the IDL user interface becomes an extreme inconvenience due to the high network latency to draw or operate the interfaces. In order to realize lower latency for remote access to the PCS system, a web-based system has been developed for EAST recently. The setup data are retrieved from the PCS system and client-side JavaScript draws the interfaces into the user's browser. The user settings are also sent back to the PCS system for controlling discharges. These technologies allow the web-based user interface to be viewed by authorized users with a web browser and have it communicate with PCS server processes directly. It works together with the IDL interface and provides a new way to aid remote participation.

  10. Human Systems Interface Design Methods Using Ecological Interface Design Principles

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seung Kweon; Park, Jung Chul; Kim, Sun Su; Sim, Kwang Pyo; Yuk, Seung Yul; Choi, Jae Hyeon; Yoon, Seung Hyun [Chungju National University, Chungju (Korea, Republic of)

    2009-12-15

    The results of this study categorized into two parts. The first part is the guidelines for EID designs. The procedure to observe for EID design is composed of 6 steps; 1) to define a target system, 2) to make an abstraction hierarchy model, 3) to check the link structure among each components included in the layers of abstraction hierarchy model, 4) to transform information requirements to variables, 5) to make the graphs related to each variables, 6) to check the graphs by visual display design principles and heuristic rules. The second part is an EID design alternative for nuclear power plant. The EID for high level function represents the energy balance and energy flow in each loop of nuclear power plant. The EID for middle level function represents the performance indicators of each equipment involved in the all processes of changing from coolants to steam. The EID for low level function represents the values measured in each equipment such as temperature, pressure, water level and so on.

  11. The Seasonal Ice Zone Observing Network (SIZONet) Local Observations Interface, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — The Seasonal Ice Zone Observing Network Local Observations Interface allows access to observations of sea ice, weather, and wildlife collected since 2006 by...

  12. Network of networks in Linux operating system

    Science.gov (United States)

    Wang, Haoqin; Chen, Zhen; Xiao, Guanping; Zheng, Zheng

    2016-04-01

    Operating system represents one of the most complex man-made systems. In this paper, we analyze Linux Operating System (LOS) as a complex network via modeling functions as nodes and function calls as edges. It is found that for the LOS network and modularized components within it, the out-degree follows an exponential distribution and the in-degree follows a power-law distribution. For better understanding the underlying design principles of LOS, we explore the coupling correlations of components in LOS from aspects of topology and function. The result shows that the component for device drivers has a strong manifestation in topology while a weak manifestation in function. However, the component for process management shows the contrary phenomenon. Moreover, in an effort to investigate the impact of system failures on networks, we make a comparison between the networks traced from normal and failure status of LOS. This leads to a conclusion that the failure will change function calls which should be executed in normal status and introduce new function calls in the meanwhile.

  13. Description of the PRISM system architecture and user interface

    Science.gov (United States)

    Constanza, P.; Larsson, C.; Thiemann, H.; Wedi, N.

    2003-04-01

    The PRISM system architecture enables the user to perform numerical experiments, allowing to couple interchangeable model components, e.g. atmosphere, ocean, biosphere, chemistry, via standardised interfaces. The coupler is based on standard interfaces implemented in the different model components. The exchange of data between the components will occur either in a direct way between components or through the coupler. The general architecture provides the infrastructure to configure, submit, monitor and subsequently post process, archive and diagnose the results of these coupled model experiments. There is an emphasis on choosing an architectural design that allows these activities to be done remotely, e.g. without the user physically being in the same place where the numerical computations take place. The PRISM general architecture gives the choice to the user either to work locally or to work through a central PRISM site where the user will be registered. Locally or via the Internet, the user will be able to use the same graphical user interface. The choice will depend of the local availability of the required resources. In addition a supervisor monitor program (SMS) gives full control over model simulations during run-time. The technology that realises the proposed architecture is known as "Web services". This includes the use of web servers, application servers, resource directories, discovery mechanisms and messages services. Currently there is no client software that can be used with browsers that does not build on Java technology. Java supports all the mechanisms needed for implementing web services using available standards. From a system maintenance point of view using one technology, Java, is the preferred way as this simplifies the task of adhering to multiple standards. The issue of standardisation of interfaces is important for complex and configurable systems such as PRISM. For example the extensible Markup Language (XML) allows for standardisation of

  14. Views of wireless network systems.

    Energy Technology Data Exchange (ETDEWEB)

    Young, William Frederick; Duggan, David Patrick

    2003-10-01

    Wireless networking is becoming a common element of industrial, corporate, and home networks. Commercial wireless network systems have become reliable, while the cost of these solutions has become more affordable than equivalent wired network solutions. The security risks of wireless systems are higher than wired and have not been studied in depth. This report starts to bring together information on wireless architectures and their connection to wired networks. We detail information contained on the many different views of a wireless network system. The method of using multiple views of a system to assist in the determination of vulnerabilities comes from the Information Design Assurance Red Team (IDART{trademark}) Methodology of system analysis developed at Sandia National Laboratories.

  15. Mapping biological systems to network systems

    CERN Document Server

    Rathore, Heena

    2016-01-01

    The book presents the challenges inherent in the paradigm shift of network systems from static to highly dynamic distributed systems – it proposes solutions that the symbiotic nature of biological systems can provide into altering networking systems to adapt to these changes. The author discuss how biological systems – which have the inherent capabilities of evolving, self-organizing, self-repairing and flourishing with time – are inspiring researchers to take opportunities from the biology domain and map them with the problems faced in network domain. The book revolves around the central idea of bio-inspired systems -- it begins by exploring why biology and computer network research are such a natural match. This is followed by presenting a broad overview of biologically inspired research in network systems -- it is classified by the biological field that inspired each topic and by the area of networking in which that topic lies. Each case elucidates how biological concepts have been most successfully ...

  16. Systems Engineering Interfaces: A Model Based Approach

    Science.gov (United States)

    Fosse, Elyse; Delp, Christopher

    2013-01-01

    Currently: Ops Rev developed and maintains a framework that includes interface-specific language, patterns, and Viewpoints. Ops Rev implements the framework to design MOS 2.0 and its 5 Mission Services. Implementation de-couples interfaces and instances of interaction Future: A Mission MOSE implements the approach and uses the model based artifacts for reviews. The framework extends further into the ground data layers and provides a unified methodology.

  17. Sensory system for implementing a human-computer interface based on electrooculography.

    Science.gov (United States)

    Barea, Rafael; Boquete, Luciano; Rodriguez-Ascariz, Jose Manuel; Ortega, Sergio; López, Elena

    2011-01-01

    This paper describes a sensory system for implementing a human-computer interface based on electrooculography. An acquisition system captures electrooculograms and transmits them via the ZigBee protocol. The data acquired are analysed in real time using a microcontroller-based platform running the Linux operating system. The continuous wavelet transform and neural network are used to process and analyse the signals to obtain highly reliable results in real time. To enhance system usability, the graphical interface is projected onto special eyewear, which is also used to position the signal-capturing electrodes.

  18. Neuromorphic neural interfaces: from neurophysiological inspiration to biohybrid coupling with nervous systems

    Science.gov (United States)

    Broccard, Frédéric D.; Joshi, Siddharth; Wang, Jun; Cauwenberghs, Gert

    2017-08-01

    Objective. Computation in nervous systems operates with different computational primitives, and on different hardware, than traditional digital computation and is thus subjected to different constraints from its digital counterpart regarding the use of physical resources such as time, space and energy. In an effort to better understand neural computation on a physical medium with similar spatiotemporal and energetic constraints, the field of neuromorphic engineering aims to design and implement electronic systems that emulate in very large-scale integration (VLSI) hardware the organization and functions of neural systems at multiple levels of biological organization, from individual neurons up to large circuits and networks. Mixed analog/digital neuromorphic VLSI systems are compact, consume little power and operate in real time independently of the size and complexity of the model. Approach. This article highlights the current efforts to interface neuromorphic systems with neural systems at multiple levels of biological organization, from the synaptic to the system level, and discusses the prospects for future biohybrid systems with neuromorphic circuits of greater complexity. Main results. Single silicon neurons have been interfaced successfully with invertebrate and vertebrate neural networks. This approach allowed the investigation of neural properties that are inaccessible with traditional techniques while providing a realistic biological context not achievable with traditional numerical modeling methods. At the network level, populations of neurons are envisioned to communicate bidirectionally with neuromorphic processors of hundreds or thousands of silicon neurons. Recent work on brain-machine interfaces suggests that this is feasible with current neuromorphic technology. Significance. Biohybrid interfaces between biological neurons and VLSI neuromorphic systems of varying complexity have started to emerge in the literature. Primarily intended as a

  19. Risks in Networked Computer Systems

    OpenAIRE

    Klingsheim, André N.

    2008-01-01

    Networked computer systems yield great value to businesses and governments, but also create risks. The eight papers in this thesis highlight vulnerabilities in computer systems that lead to security and privacy risks. A broad range of systems is discussed in this thesis: Norwegian online banking systems, the Norwegian Automated Teller Machine (ATM) system during the 90's, mobile phones, web applications, and wireless networks. One paper also comments on legal risks to bank cust...

  20. [Network structures in biological systems].

    Science.gov (United States)

    Oleskin, A V

    2013-01-01

    Network structures (networks) that have been extensively studied in the humanities are characterized by cohesion, a lack of a central control unit, and predominantly fractal properties. They are contrasted with structures that contain a single centre (hierarchies) as well as with those whose elements predominantly compete with one another (market-type structures). As far as biological systems are concerned, their network structures can be subdivided into a number of types involving different organizational mechanisms. Network organization is characteristic of various structural levels of biological systems ranging from single cells to integrated societies. These networks can be classified into two main subgroups: (i) flat (leaderless) network structures typical of systems that are composed of uniform elements and represent modular organisms or at least possess manifest integral properties and (ii) three-dimensional, partly hierarchical structures characterized by significant individual and/or intergroup (intercaste) differences between their elements. All network structures include an element that performs structural, protective, and communication-promoting functions. By analogy to cell structures, this element is denoted as the matrix of a network structure. The matrix includes a material and an immaterial component. The material component comprises various structures that belong to the whole structure and not to any of its elements per se. The immaterial (ideal) component of the matrix includes social norms and rules regulating network elements' behavior. These behavioral rules can be described in terms of algorithms. Algorithmization enables modeling the behavior of various network structures, particularly of neuron networks and their artificial analogs.

  1. The JigCell model builder: a spreadsheet interface for creating biochemical reaction network models.

    Science.gov (United States)

    Vass, Marc T; Shaffer, Clifford A; Ramakrishnan, Naren; Watson, Layne T; Tyson, John J

    2006-01-01

    Converting a biochemical reaction network to a set of kinetic rate equations is tedious and error prone. We describe known interface paradigms for inputing models of intracellular regulatory networks: graphical layout (diagrams), wizards, scripting languages, and direct entry of chemical equations. We present the JigCell Model Builder, which allows users to define models as a set of reaction equations using a spreadsheet (an example of direct entry of equations) and outputs model definitions in the Systems Biology Markup Language, Level 2. We present the results of two usability studies. The spreadsheet paradigm demonstrated its effectiveness in reducing the number of errors made by modelers when compared to hand conversion of a wiring diagram to differential equations. A comparison of representatives of the four interface paradigms for a simple model of the cell cycle was conducted which measured time, mouse clicks, and keystrokes to enter the model, and the number of screens needed to view the contents of the model. All four paradigms had similar data entry times. The spreadsheet and scripting language approaches require significantly fewer screens to view the models than do the wizard or graphical layout approaches.

  2. Language Networks as Complex Systems

    Science.gov (United States)

    Lee, Max Kueiming; Ou, Sheue-Jen

    2008-01-01

    Starting in the late eighties, with a growing discontent with analytical methods in science and the growing power of computers, researchers began to study complex systems such as living organisms, evolution of genes, biological systems, brain neural networks, epidemics, ecology, economy, social networks, etc. In the early nineties, the research…

  3. Financial Network Systemic Risk Contributions

    NARCIS (Netherlands)

    Hautsch, N.; Schaumburg, J.; Schienle, M.

    2015-01-01

    We propose the realized systemic risk beta as a measure of financial companies' contribution to systemic risk, given network interdependence between firms' tail risk exposures. Conditional on statistically pre-identified network spillover effects and market and balance sheet information, we define

  4. An open source web interface for linking models to infrastructure system databases

    Science.gov (United States)

    Knox, S.; Mohamed, K.; Harou, J. J.; Rheinheimer, D. E.; Medellin-Azuara, J.; Meier, P.; Tilmant, A.; Rosenberg, D. E.

    2016-12-01

    Models of networked engineered resource systems such as water or energy systems are often built collaboratively with developers from different domains working at different locations. These models can be linked to large scale real world databases, and they are constantly being improved and extended. As the development and application of these models becomes more sophisticated, and the computing power required for simulations and/or optimisations increases, so has the need for online services and tools which enable the efficient development and deployment of these models. Hydra Platform is an open source, web-based data management system, which allows modellers of network-based models to remotely store network topology and associated data in a generalised manner, allowing it to serve multiple disciplines. Hydra Platform uses a web API using JSON to allow external programs (referred to as `Apps') to interact with its stored networks and perform actions such as importing data, running models, or exporting the networks to different formats. Hydra Platform supports multiple users accessing the same network and has a suite of functions for managing users and data. We present ongoing development in Hydra Platform, the Hydra Web User Interface, through which users can collaboratively manage network data and models in a web browser. The web interface allows multiple users to graphically access, edit and share their networks, run apps and view results. Through apps, which are located on the server, the web interface can give users access to external data sources and models without the need to install or configure any software. This also ensures model results can be reproduced by removing platform or version dependence. Managing data and deploying models via the web interface provides a way for multiple modellers to collaboratively manage data, deploy and monitor model runs and analyse results.

  5. Cortical Spiking Network Interfaced with Virtual Musculoskeletal Arm and Robotic Arm

    Science.gov (United States)

    Dura-Bernal, Salvador; Zhou, Xianlian; Neymotin, Samuel A.; Przekwas, Andrzej; Francis, Joseph T.; Lytton, William W.

    2015-01-01

    Embedding computational models in the physical world is a critical step towards constraining their behavior and building practical applications. Here we aim to drive a realistic musculoskeletal arm model using a biomimetic cortical spiking model, and make a robot arm reproduce the same trajectories in real time. Our cortical model consisted of a 3-layered cortex, composed of several hundred spiking model-neurons, which display physiologically realistic dynamics. We interconnected the cortical model to a two-joint musculoskeletal model of a human arm, with realistic anatomical and biomechanical properties. The virtual arm received muscle excitations from the neuronal model, and fed back proprioceptive information, forming a closed-loop system. The cortical model was trained using spike timing-dependent reinforcement learning to drive the virtual arm in a 2D reaching task. Limb position was used to simultaneously control a robot arm using an improved network interface. Virtual arm muscle activations responded to motoneuron firing rates, with virtual arm muscles lengths encoded via population coding in the proprioceptive population. After training, the virtual arm performed reaching movements which were smoother and more realistic than those obtained using a simplistic arm model. This system provided access to both spiking network properties and to arm biophysical properties, including muscle forces. The use of a musculoskeletal virtual arm and the improved control system allowed the robot arm to perform movements which were smoother than those reported in our previous paper using a simplistic arm. This work provides a novel approach consisting of bidirectionally connecting a cortical model to a realistic virtual arm, and using the system output to drive a robotic arm in real time. Our techniques are applicable to the future development of brain neuroprosthetic control systems, and may enable enhanced brain-machine interfaces with the possibility for finer control of

  6. Cortical spiking network interfaced with virtual musculoskeletal arm and robotic arm

    Directory of Open Access Journals (Sweden)

    Salvador eDura-Bernal

    2015-11-01

    Full Text Available Embedding computational models in the physical world is a critical step towards constraining their behavior and building practical applications. Here we aim to drive a realistic musculoskeletal arm model using a biomimetic cortical spiking model, and make a robot arm reproduce the same trajectories in real time. Our cortical model consisted of a 3-layered cortex, composed of several hundred spiking model-neurons, which display physiologically realistic dynamics. We interconnected the cortical model to a two-joint musculoskeletal model of a human arm, with realistic anatomical and biomechanical properties. The virtual arm received muscle excitations from the neuronal model, and fed back proprioceptive information, forming a closed-loop system. The cortical model was trained using spike timing-dependent reinforcement learning to drive the virtual arm in a 2D reaching task. Limb position was used to simultaneously control a robot arm using an improved network interface. Virtual arm muscle activations responded to motoneuron firing rates, with virtual arm muscles lengths encoded via population coding in the proprioceptive population. After training, the virtual arm performed reaching movements which were smoother and more realistic than those obtained using a simplistic arm model. This system provided access to both spiking network properties and to arm biophysical properties, including muscle forces. The use of a musculoskeletal virtual arm and the improved control system allowed the robot arm to perform movements which were smoother than those reported in our previous paper using a simplistic arm.This work provides a novel approach consisting of bidirectionally connecting a cortical model to a realistic virtual arm, and using the system output to drive a robotic arm in real time. Our techniques are applicable to the future development of brain neuro-prosthetic control systems, and may enable enhanced brain-machine interfaces with the possibility

  7. Cortical Spiking Network Interfaced with Virtual Musculoskeletal Arm and Robotic Arm.

    Science.gov (United States)

    Dura-Bernal, Salvador; Zhou, Xianlian; Neymotin, Samuel A; Przekwas, Andrzej; Francis, Joseph T; Lytton, William W

    2015-01-01

    Embedding computational models in the physical world is a critical step towards constraining their behavior and building practical applications. Here we aim to drive a realistic musculoskeletal arm model using a biomimetic cortical spiking model, and make a robot arm reproduce the same trajectories in real time. Our cortical model consisted of a 3-layered cortex, composed of several hundred spiking model-neurons, which display physiologically realistic dynamics. We interconnected the cortical model to a two-joint musculoskeletal model of a human arm, with realistic anatomical and biomechanical properties. The virtual arm received muscle excitations from the neuronal model, and fed back proprioceptive information, forming a closed-loop system. The cortical model was trained using spike timing-dependent reinforcement learning to drive the virtual arm in a 2D reaching task. Limb position was used to simultaneously control a robot arm using an improved network interface. Virtual arm muscle activations responded to motoneuron firing rates, with virtual arm muscles lengths encoded via population coding in the proprioceptive population. After training, the virtual arm performed reaching movements which were smoother and more realistic than those obtained using a simplistic arm model. This system provided access to both spiking network properties and to arm biophysical properties, including muscle forces. The use of a musculoskeletal virtual arm and the improved control system allowed the robot arm to perform movements which were smoother than those reported in our previous paper using a simplistic arm. This work provides a novel approach consisting of bidirectionally connecting a cortical model to a realistic virtual arm, and using the system output to drive a robotic arm in real time. Our techniques are applicable to the future development of brain neuroprosthetic control systems, and may enable enhanced brain-machine interfaces with the possibility for finer control of

  8. The Johnson Space Center Management Information Systems (JSCMIS): An interface for organizational databases

    Science.gov (United States)

    Bishop, Peter C.; Erickson, Lloyd

    1990-01-01

    The Management Information and Decision Support Environment (MIDSE) is a research activity to build and test a prototype of a generic human interface on the Johnson Space Center (JSC) Information Network (CIN). The existing interfaces were developed specifically to support operations rather than the type of data which management could use. The diversity of the many interfaces and their relative difficulty discouraged occasional users from attempting to use them for their purposes. The MIDSE activity approached this problem by designing and building an interface to one JSC data base - the personnel statistics tables of the NASA Personnel and Payroll System (NPPS). The interface was designed against the following requirements: generic (use with any relational NOMAD data base); easy to learn (intuitive operations for new users); easy to use (efficient operations for experienced users); self-documenting (help facility which informs users about the data base structure as well as the operation of the interface); and low maintenance (easy configuration to new applications). A prototype interface entitled the JSC Management Information Systems (JSCMIS) was produced. It resides on CIN/PROFS and is available to JSC management who request it. The interface has passed management review and is ready for early use. Three kinds of data are now available: personnel statistics, personnel register, and plan/actual cost.

  9. A Cross-Layer Routing Design for Multi-Interface Wireless Mesh Networks

    Directory of Open Access Journals (Sweden)

    Tzu-Chieh Tsai

    2009-01-01

    Full Text Available In recent years, Wireless Mesh Networks (WMNs technologies have received significant attentions. WMNs not only accede to the advantages of ad hoc networks but also provide hierarchical multi-interface architecture. Transmission power control and routing path selections are critical issues in the past researches of multihop networks. Variable transmission power levels lead to different network connectivity and interference. Further, routing path selections among different radio interfaces will also produce different intra-/interflow interference. These features tightly affect the network performance. Most of the related works on the routing protocol design do not consider transmission power control and multi-interface environment simultaneously. In this paper, we proposed a cross-layer routing protocol called M2iRi2 which coordinates transmission power control and intra-/interflow interference considerations as routing metrics. Each radio interface calculates the potential tolerable-added transmission interference in the physical layer. When the route discovery starts, the M2iRi2 will adopt the appropriate power level to evaluate each interface quality along paths. The simulation results demonstrate that our design can enhance both network throughput and end-to-end delay.

  10. Simplifying the interaction between cognitive models and task environments with the JSON Network Interface.

    Science.gov (United States)

    Hope, Ryan M; Schoelles, Michael J; Gray, Wayne D

    2014-12-01

    Process models of cognition, written in architectures such as ACT-R and EPIC, should be able to interact with the same software with which human subjects interact. By eliminating the need to simulate the experiment, this approach would simplify the modeler's effort, while ensuring that all steps required of the human are also required by the model. In practice, the difficulties of allowing one software system to interact with another present a significant barrier to any modeler who is not also skilled at this type of programming. The barrier increases if the programming language used by the modeling software differs from that used by the experimental software. The JSON Network Interface simplifies this problem for ACT-R modelers, and potentially, modelers using other systems.

  11. Meteorological Support Interface Control Working Group (MSICWG) Instrumentation, Data Format, and Networks Document

    Science.gov (United States)

    Brenton, James; Roberts, Barry C.

    2017-01-01

    The purpose of this document is to provide an overview of instrumentation discussed at the Meteorological Interface Control Working Group (MSICWG), a reference for data formats currently used by members of the group, a summary of proposed formats for future use by the group, an overview of the data networks of the group's members. This document will be updated as new systems are introduced, old systems are retired, and when the MSICWG community necessitates a change to the formats. The MSICWG consists of personnel from the National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC), NASA Marshall Space Flight Center (MSFC), NASA Johnson Space Center (JSC), National Oceanic and Atmospheric Administration National Weather Service Spaceflight Meteorology Group (SMG), and the United States Air Force (USAF) 45th Space Wing and Weather Squadron. The purpose of the group is to coordinate the distribution of weather related data to support NASA space launch related activities.

  12. Medical Signal-Conditioning and Data-Interface System

    Science.gov (United States)

    Braun, Jeffrey; Jacobus, charles; Booth, Scott; Suarez, Michael; Smith, Derek; Hartnagle, Jeffrey; LePrell, Glenn

    2006-01-01

    A general-purpose portable, wearable electronic signal-conditioning and data-interface system is being developed for medical applications. The system can acquire multiple physiological signals (e.g., electrocardiographic, electroencephalographic, and electromyographic signals) from sensors on the wearer s body, digitize those signals that are received in analog form, preprocess the resulting data, and transmit the data to one or more remote location(s) via a radiocommunication link and/or the Internet. The system includes a computer running data-object-oriented software that can be programmed to configure the system to accept almost any analog or digital input signals from medical devices. The computing hardware and software implement a general-purpose data-routing-and-encapsulation architecture that supports tagging of input data and routing the data in a standardized way through the Internet and other modern packet-switching networks to one or more computer(s) for review by physicians. The architecture supports multiple-site buffering of data for redundancy and reliability, and supports both real-time and slower-than-real-time collection, routing, and viewing of signal data. Routing and viewing stations support insertion of automated analysis routines to aid in encoding, analysis, viewing, and diagnosis.

  13. Networking systems design and development

    CERN Document Server

    Chao, Lee

    2009-01-01

    Effectively integrating theory and hands-on practice, Networking Systems Design and Development provides students and IT professionals with the knowledge and skills needed to design, implement, and manage fully functioning network systems using readily available Linux networking tools. Recognizing that most students are beginners in the field of networking, the text provides step-by-step instruction for setting up a virtual lab environment at home. Grounded in real-world applications, this book provides the ideal blend of conceptual instruction and lab work to give students and IT professional

  14. Surface and interface dynamics in multilayered systems

    NARCIS (Netherlands)

    Tsarfati, Tim

    2009-01-01

    In the broad scientific field of thin films, applications have rapidly expanded since the second half of the 20th century, as has been described in the valorization chapter. This thesis describes research at the interface between surface chemistry and physics. The characterization of d-metal surface

  15. Efficient Data Transfer Rate and Speed of Secured Ethernet Interface System.

    Science.gov (United States)

    Ghanti, Shaila; Naik, G M

    2016-01-01

    Embedded systems are extensively used in home automation systems, small office systems, vehicle communication systems, and health service systems. The services provided by these systems are available on the Internet and these services need to be protected. Security features like IP filtering, UDP protection, or TCP protection need to be implemented depending on the specific application used by the device. Every device on the Internet must have network interface. This paper proposes the design of the embedded Secured Ethernet Interface System to protect the service available on the Internet against the SYN flood attack. In this experimental study, Secured Ethernet Interface System is customized to protect the web service against the SYN flood attack. Secured Ethernet Interface System is implemented on ALTERA Stratix IV FPGA as a system on chip and uses the modified SYN flood attack protection method. The experimental results using Secured Ethernet Interface System indicate increase in number of genuine clients getting service from the server, considerable improvement in the data transfer rate, and better response time during the SYN flood attack.

  16. Efficient Data Transfer Rate and Speed of Secured Ethernet Interface System

    Science.gov (United States)

    Ghanti, Shaila

    2016-01-01

    Embedded systems are extensively used in home automation systems, small office systems, vehicle communication systems, and health service systems. The services provided by these systems are available on the Internet and these services need to be protected. Security features like IP filtering, UDP protection, or TCP protection need to be implemented depending on the specific application used by the device. Every device on the Internet must have network interface. This paper proposes the design of the embedded Secured Ethernet Interface System to protect the service available on the Internet against the SYN flood attack. In this experimental study, Secured Ethernet Interface System is customized to protect the web service against the SYN flood attack. Secured Ethernet Interface System is implemented on ALTERA Stratix IV FPGA as a system on chip and uses the modified SYN flood attack protection method. The experimental results using Secured Ethernet Interface System indicate increase in number of genuine clients getting service from the server, considerable improvement in the data transfer rate, and better response time during the SYN flood attack. PMID:28116350

  17. Man-system interface based on automatic speech recognition: integration to a virtual control desk

    Energy Technology Data Exchange (ETDEWEB)

    Jorge, Carlos Alexandre F.; Mol, Antonio Carlos A.; Pereira, Claudio M.N.A.; Aghina, Mauricio Alves C., E-mail: calexandre@ien.gov.b, E-mail: mol@ien.gov.b, E-mail: cmnap@ien.gov.b, E-mail: mag@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Nomiya, Diogo V., E-mail: diogonomiya@gmail.co [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil)

    2009-07-01

    This work reports the implementation of a man-system interface based on automatic speech recognition, and its integration to a virtual nuclear power plant control desk. The later is aimed to reproduce a real control desk using virtual reality technology, for operator training and ergonomic evaluation purpose. An automatic speech recognition system was developed to serve as a new interface with users, substituting computer keyboard and mouse. They can operate this virtual control desk in front of a computer monitor or a projection screen through spoken commands. The automatic speech recognition interface developed is based on a well-known signal processing technique named cepstral analysis, and on artificial neural networks. The speech recognition interface is described, along with its integration with the virtual control desk, and results are presented. (author)

  18. Communicating embedded systems networks applications

    CERN Document Server

    Krief, Francine

    2013-01-01

    Embedded systems become more and more complex and require having some knowledge in various disciplines such as electronics, data processing, telecommunications and networks. Without detailing all the aspects related to the design of embedded systems, this book, which was written by specialists in electronics, data processing and telecommunications and networks, gives an interesting point of view of communication techniques and problems in embedded systems. This choice is easily justified by the fact that embedded systems are today massively communicating and that telecommunications and network

  19. Connected Lighting System Interoperability Study Part 1: Application Programming Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Gaidon, Clement [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poplawski, Michael [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-10-31

    First in a series of studies that focuses on interoperability as realized by the use of Application Programming Interfaces (APIs), explores the diversity of such interfaces in several connected lighting systems; characterizes the extent of interoperability that they provide; and illustrates challenges, limitations, and tradeoffs that were encountered during this exploration.

  20. Age Based User Interface in Mobile Operating System

    OpenAIRE

    Sharma, Sumit; Sharma, Rohitt; Singh, Paramjit; Mahajan, Aditya

    2012-01-01

    This paper proposes the creation of different interfaces in the mobile operating system for different age groups. The different age groups identified are kids, elderly people and all others. The motive behind creating different interfaces is to make the smartphones of today's world usable to all age groups.

  1. Efficient Network Monitoring for Large Data Acquisition Systems

    CERN Document Server

    Savu, DO; The ATLAS collaboration; Al-Shabibi, A; Sjoen, R; Batraneanu, SM; Stancu, SN

    2011-01-01

    Though constantly evolving and improving, the available network monitoring solutions have limitations when applied to the infrastructure of a high speed real-time data acquisition (DAQ) system. DAQ networks are particular computer networks where experts have to pay attention to both individual subsections as well as system wide traffic flows while monitoring the network. The ATLAS Network at the Large Hadron Collider (LHC) has more than 200 switches interconnecting 3500 hosts and totaling 8500 high speed links. The use of heterogeneous tools for monitoring various infrastructure parameters, in order to assure optimal DAQ system performance, proved to be a tedious and time consuming task for experts. To alleviate this problem we used our networking and DAQ expertise to build a flexible and scalable monitoring system providing an intuitive user interface with the same look and feel irrespective of the data provider that is used. Our system uses custom developed components for critical performance monitoring and...

  2. Delays and networked control systems

    CERN Document Server

    Hetel, Laurentiu; Daafouz, Jamal; Johansson, Karl

    2016-01-01

    This edited monograph includes state-of-the-art contributions on continuous time dynamical networks with delays. The book is divided into four parts. The first part presents tools and methods for the analysis of time-delay systems with a particular attention on control problems of large scale or infinite-dimensional systems with delays. The second part of the book is dedicated to the use of time-delay models for the analysis and design of Networked Control Systems. The third part of the book focuses on the analysis and design of systems with asynchronous sampling intervals which occur in Networked Control Systems. The last part of the book exposes several contributions dealing with the design of cooperative control and observation laws for networked control systems. The target audience primarily comprises researchers and experts in the field of control theory, but the book may also be beneficial for graduate students. .

  3. The intelligent user interface for NASA's advanced information management systems

    Science.gov (United States)

    Campbell, William J.; Short, Nicholas, Jr.; Rolofs, Larry H.; Wattawa, Scott L.

    1987-01-01

    NASA has initiated the Intelligent Data Management Project to design and develop advanced information management systems. The project's primary goal is to formulate, design and develop advanced information systems that are capable of supporting the agency's future space research and operational information management needs. The first effort of the project was the development of a prototype Intelligent User Interface to an operational scientific database, using expert systems and natural language processing technologies. An overview of Intelligent User Interface formulation and development is given.

  4. Implementation of a template management interface for document systems

    OpenAIRE

    Kmet, Damjan

    2010-01-01

    In the development of document management systems we are often confronted with the implementation of office packages into the document management system. By doing this, we face similar concerns regarding the implementation of the template, therefore we can put the requirements together and create an interface to manage the template into the document management system. The interface can shorten the time required for the construction and maintenance of templates of the office packages in the do...

  5. Guidance for Human-system Interfaces to Automatic Systems

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, J.M.; Higgins, J.; Stephen Fleger; Valerie Barnes

    2010-09-27

    Automation is ubiquitous in modern complex systems, and commercial nuclear- power plants are no exception. Automation is applied to a wide range of functions, including monitoring and detection, situation assessment, response planning, and response implementation. Automation has become a 'team player' supporting personnel in nearly all aspects of system operation. In light of its increasing use and importance in new- and future-plants, guidance is needed to conduct safety reviews of the operator's interface with automation. The objective of this research was to develop such guidance. We first characterized the important HFE aspects of automation, including six dimensions: Levels, functions, processes, modes, flexibility, and reliability. Next, we reviewed literature on the effects of all of these aspects of automation on human performance, and on the design of human-system interfaces (HSIs). Then, we used this technical basis established from the literature to identify general principles for human-automation interaction and to develop review guidelines. The guidelines consist of the following seven topics: Automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration.

  6. Asynchronous control for networked systems

    CERN Document Server

    Rubio, Francisco; Bencomo, Sebastián

    2015-01-01

    This book sheds light on networked control systems; it describes different techniques for asynchronous control, moving away from the periodic actions of classical control, replacing them with state-based decisions and reducing the frequency with which communication between subsystems is required. The text focuses specially on event-based control. Split into two parts, Asynchronous Control for Networked Systems begins by addressing the problems of single-loop networked control systems, laying out various solutions which include two alternative model-based control schemes (anticipatory and predictive) and the use of H2/H∞ robust control to deal with network delays and packet losses. Results on self-triggering and send-on-delta sampling are presented to reduce the need for feedback in the loop. In Part II, the authors present solutions for distributed estimation and control. They deal first with reliable networks and then extend their results to scenarios in which delays and packet losses may occur. The novel ...

  7. Performance of Networked Control Systems

    Directory of Open Access Journals (Sweden)

    Yingwei Zhang

    2013-01-01

    Full Text Available Data packet dropout is a special kind of time delay problem. In this paper, predictive controllers for networked control systems (NCSs with dual-network are designed by model predictive control method. The contributions are as follows. (1 The predictive control problem of the dual-network is considered. (2 The predictive performance of the dual-network is evaluated. (3 Compared to the popular networked control systems, the optimal controller of the new NCSs with data packets dropout is designed, which can minimize infinite performance index at each sampling time and guarantee the closed-loop system stability. Finally, the simulation results show the feasibility and effectiveness of the controllers designed.

  8. Self-Securing Network Interfaces: What, Why and How?

    Science.gov (United States)

    2002-05-01

    G. Anagnostakis, William A. Arbaugh, Angelos D. Keromytis, and Jonathan M. Smith. The price of safety in an active network. MS–CIS–99–04. Depart- ment...of Computer and Information Science, University of Pennsylvania, 1999. [4] Thomas E. Anderson, David E. Culler , and David A. Patterson. A case for...NOW (networks of workstations). IEEE Micro, 15(1):54–64, February 1995. [5] William A. Arbaugh, David J. Farber, and Jonathan M. Smith. A secure and

  9. A general UNIX interface for biocomputing and network information retrieval software.

    Science.gov (United States)

    Kiong, B K; Tan, T W

    1993-10-01

    We describe a UNIX program, HYBROW, which can integrate without modification a wide range of UNIX biocomputing and network information retrieval software. HYBROW works in conjunction with a separate set of ASCII files containing embedded hypertext-like links. The program operates like a hypertext browser featuring five basic links: file link, execute-only link, execute-display link, directory-browse link and field-filling link. Useful features of the interface may be developed using combinations of these links with simple shell scripts and examples of these are briefly described. The system manager who supports biocomputing users should find the program easy to maintain, and useful in assisting new and infrequent users; it is also simple to incorporate new programs. Moreover, the individual user can customize the interface, create dynamic menus, hypertext a document, invoke shell scripts and new programs simply with a basic understanding of the UNIX operating system and any text editor. This program was written in C language and uses the UNIX curses and termcap libraries. It is freely available as a tar compressed file (by anonymous FTP from nuscc.nus.sg).

  10. RECOMMENDER SYSTEMS IN SOCIAL NETWORKS

    Directory of Open Access Journals (Sweden)

    Cleomar Valois Batista Jr

    2011-12-01

    Full Text Available The continued and diversified growth of social networks has changed the way in which users interact with them. With these changes, what once was limited to social contact is now used for exchanging ideas and opinions, creating the need for new features. Users have so much information at their fingertips that they are unable to process it by themselves; hence, the need to develop new tools. Recommender systems were developed to address this need and many techniques were used for different approaches to the problem. To make relevant recommendations, these systems use large sets of data, not taking the social network of the user into consideration. Developing a recommender system that takes into account the social network of the user is another way of tackling the problem. The purpose of this project is to use the theory of six degrees of separation (Watts 2003 amongst users of a social network to enhance existing recommender systems.

  11. User Interface Aspects of a Human-Hand Simulation System

    Directory of Open Access Journals (Sweden)

    Beifang Yi

    2005-10-01

    Full Text Available This paper describes the user interface design for a human-hand simulation system, a virtual environment that produces ground truth data (life-like human hand gestures and animations and provides visualization support for experiments on computer vision-based hand pose estimation and tracking. The system allows users to save time in data generation and easily create any hand gestures. We have designed and implemented this user interface with the consideration of usability goals and software engineering issues.

  12. VisTool: A user interface and visualization development system

    DEFF Research Database (Denmark)

    Xu, Shangjin

    system – to simplify user interface development. VisTool allows user interface development without real programming. With VisTool a designer assembles visual objects (e.g. textboxes, ellipse, etc.) to visualize database contents. In VisTool, visual properties (e.g. color, position, etc.) can be formulas....... However, it is more difficult to follow the classical usability approach for graphical presentation development. These difficulties result from the fact that designers cannot implement user interface with interactions and real data. We developed VisTool – a user interface and visualization development...... interface objects and properties. We built visualizations such as Lifelines, Parallel Coordinates, Heatmap, etc. to show that the formula-based approach is powerful enough for building customized visualizations. The evaluation with Cognitive Dimensions shows that the formula-based approach is cognitively...

  13. Management of the ESA Tracking Network- Load Forecasts and Mission Interfaces

    Science.gov (United States)

    Dreihahn, H.; di Giulio, M.

    2012-08-01

    The European Space Agency is operating a network of tracking ground stations distributed all over the world called ESTRACK. These tracking stations provide the space to ground communications for ESA and external space missions and is operated from ESOC in Darmstadt. In the recent years ESOC has successfully developed and deployed the ESTRACK Management System (EMS). The EMS, or more specifically it’s planning and scheduling components are in charge of planning the times, when a certain tracking station is allocated to a space mission. Initially the EMS has been designed as an automated planning system with minimum user interaction. However, looking back number of lessons have been learned:• While automated planning is very valuable, the need for interaction and negotiation of planning results with users, i.e. space missions, has been underestimated.• Interoperability with external space mission and external network providers is already required at the stage of resource allocation planning. This has been addressed by [1].• The originally envisaged planning horizon of 2-3 weeks into the future was too short. Now, depending on the mission characteristic, ground station allocation planning is done routinely for a planning horizon of 1+ year.This paper will focus on the first and the last point of the lessons learned. We will present and discuss an approach for an interface of the ESTRACK Management System with space missions, which extends the currently implement machine to machine interface with a (web based) man to machine interface. The second aspect addressed in this paper is the so called ESTRACK Load Analysis. The capability of the EMS to automatically plan station allocation for long periods into the future enables ESTRACK load forecasts and conflict analysis at an early stage. These forecasts are essential to plan the evolution of ESTRACK and to facilitate the support of future missions. Furthermore it helps to identify resource bottlenecks which

  14. Field Trial of 40 Gb/s Optical Transport Network using Open WDM Interfaces

    DEFF Research Database (Denmark)

    Fagertun, Anna Manolova; Ruepp, Sarah Renée; Petersen, Martin Nordal

    2013-01-01

    An experimental field-trail deployment of a 40Gb/s open WDM interface in an operational network is presented, in cross-carrier interconnection scenario. Practical challenges of integration and performance measures for both native and alien channels are outlined.......An experimental field-trail deployment of a 40Gb/s open WDM interface in an operational network is presented, in cross-carrier interconnection scenario. Practical challenges of integration and performance measures for both native and alien channels are outlined....

  15. Collaborative Networked Organizations as System of Systems: A Model-Based Engineering Approach

    OpenAIRE

    Bilal, Mustapha; Daclin, Nicolas; Chapurlat, Vincent

    2014-01-01

    Part 6: Engineering and Implementation of Collaborative Networks; International audience; It is admitted that there is parallel between a System of Systems (SoS) and Collaborative Networked Organizations (CNOs). SoS Engineering (SoSE) carefully focuses on choosing, assembling and interfacing existing systems to build the so-called SoS. In this context, and as demonstrated by the literature and the System Engineering domain, interoperability takes on its full meaning and has to be fully consid...

  16. Design and Implementation of a Single-Frequency Mesh Network Using OpenAirInterface

    Directory of Open Access Journals (Sweden)

    Kaltenberger Florian

    2010-01-01

    Full Text Available OpenAirInterface is an experimental open-source real-time hardware and software platform for experimentation in wireless communications and signal processing. With the help of OpenAirInterface, researchers can demonstrate novel ideas quickly and verify them in a realistic environment. Its current implementation provides a full open-source software modem comprising physical and link layer functionalities for cellular and mesh network topologies. The physical (PHY layer of the platform targets fourth generation wireless networks and thus uses orthogonal frequency division multiple access (OFDMA together with multiple-input multiple-output (MIMO techniques. The current hardware supports 5 MHz bandwidth and two transmit/receive antennas. The media access (MAC layer of the platform supports an abundant two-way signaling for enabling collaboration, scheduling protocols, as well as traffic and channel measurements. In this paper, we focus on the mesh topology and show how to implement a single-frequency mesh network with OpenAirInterface. The key ingredients to enable such a network are a dual-stream MIMO receiver structure and a distributed network synchronization algorithm. We show how to implement these two algorithms in real-time on the OpenAirInterface platform. Further more, we provide results from field trials and compare them to the simulation results.

  17. Transformation of legacy network management system to service oriented architecture

    Science.gov (United States)

    Sathyan, Jithesh; Shenoy, Krishnananda

    2007-09-01

    Service providers today are facing the challenge of operating and maintaining multiple networks, based on multiple technologies. Network Management System (NMS) solutions are being used to manage these networks. However the NMS is tightly coupled with Element or the Core network components. Hence there are multiple NMS solutions for heterogeneous networks. Current network management solutions are targeted at a variety of independent networks. The wide spread popularity of IP Multimedia Subsystem (IMS) is a clear indication that all of these independent networks will be integrated into a single IP-based infrastructure referred to as Next Generation Networks (NGN) in the near future. The services, network architectures and traffic pattern in NGN will dramatically differ from the current networks. The heterogeneity and complexity in NGN including concepts like Fixed Mobile Convergence will bring a number of challenges to network management. The high degree of complexity accompanying the network element technology necessitates network management systems (NMS) which can utilize this technology to provide more service interfaces while hiding the inherent complexity. As operators begin to add new networks and expand existing networks to support new technologies and products, the necessity of scalable, flexible and functionally rich NMS systems arises. Another important factor influencing NMS architecture is mergers and acquisitions among the key vendors. Ease of integration is a key impediment in the traditional hierarchical NMS architecture. These requirements trigger the need for an architectural framework that will address the NGNM (Next Generation Network Management) issues seamlessly. This paper presents a unique perspective of bringing service orientated architecture (SOA) to legacy network management systems (NMS). It advocates a staged approach in transforming a legacy NMS to SOA. The architecture at each stage is detailed along with the technical advantages and

  18. Multilevel Complex Networks and Systems

    Science.gov (United States)

    Caldarelli, Guido

    2014-03-01

    Network theory has been a powerful tool to model isolated complex systems. However, the classical approach does not take into account the interactions often present among different systems. Hence, the scientific community is nowadays concentrating the efforts on the foundations of new mathematical tools for understanding what happens when multiple networks interact. The case of economic and financial networks represents a paramount example of multilevel networks. In the case of trade, trade among countries the different levels can be described by the different granularity of the trading relations. Indeed, we have now data from the scale of consumers to that of the country level. In the case of financial institutions, we have a variety of levels at the same scale. For example one bank can appear in the interbank networks, ownership network and cds networks in which the same institution can take place. In both cases the systemically important vertices need to be determined by different procedures of centrality definition and community detection. In this talk I will present some specific cases of study related to these topics and present the regularities found. Acknowledged support from EU FET Project ``Multiplex'' 317532.

  19. Dynamical Systems Theory for Transparent Symbolic Computation in Neuronal Networks

    OpenAIRE

    Carmantini, Giovanni Sirio

    2017-01-01

    In this thesis, we explore the interface between symbolic and dynamical system computation, with particular regard to dynamical system models of neuronal networks. In doing so, we adhere to a definition of computation as the physical realization of a formal system, where we say that a dynamical system performs a computation if a correspondence can be found between its dynamics on a vectorial space and the formal system’s dynamics on a symbolic space. Guided by this definition, we characterize...

  20. Advanced systems engineering and network planning support

    Science.gov (United States)

    Walters, David H.; Barrett, Larry K.; Boyd, Ronald; Bazaj, Suresh; Mitchell, Lionel; Brosi, Fred

    1990-01-01

    The objective of this task was to take a fresh look at the NASA Space Network Control (SNC) element for the Advanced Tracking and Data Relay Satellite System (ATDRSS) such that it can be made more efficient and responsive to the user by introducing new concepts and technologies appropriate for the 1997 timeframe. In particular, it was desired to investigate the technologies and concepts employed in similar systems that may be applicable to the SNC. The recommendations resulting from this study include resource partitioning, on-line access to subsets of the SN schedule, fluid scheduling, increased use of demand access on the MA service, automating Inter-System Control functions using monitor by exception, increase automation for distributed data management and distributed work management, viewing SN operational control in terms of the OSI Management framework, and the introduction of automated interface management.

  1. Designing Emotion Awareness Interface for Group Recommender Systems

    OpenAIRE

    Yu Chen; Pearl Pu

    2014-01-01

    Group recommender systems help users to find items of interest collaboratively. Support for such collaboration has been mainly provided by interfaces that visualize membership awareness preference awareness and decision awareness. In this paper we are interested in investigating the roles of emotion awareness interfaces and how they may enable positive group influence. We first describe the design process behind an emotion annotation tool which we call CoFeel. We then show that it allows user...

  2. Non-visual Interfaces and Network Games for Blind Users

    OpenAIRE

    Ina, Satoshi

    2002-01-01

    Visually impaired people have difficulty with communication of graphical information. It is to be more difficult for them to work/play in cooperation with sighted people at a distance. We developed a non-visual access method to a graphical screen through tactile and auditory sense, and applied it into network board/card games as a joint workspace for blind and sighted users via communication of image, sound, and voice. We took an "IGO" type boardgame and a Card game "SEVENS" as sample subject...

  3. Using the electrocorticographic speech network to control a brain-computer interface in humans

    Science.gov (United States)

    Leuthardt, Eric C.; Gaona, Charles; Sharma, Mohit; Szrama, Nicholas; Roland, Jarod; Freudenberg, Zac; Solis, Jamie; Breshears, Jonathan; Schalk, Gerwin

    2011-06-01

    Electrocorticography (ECoG) has emerged as a new signal platform for brain-computer interface (BCI) systems. Classically, the cortical physiology that has been commonly investigated and utilized for device control in humans has been brain signals from the sensorimotor cortex. Hence, it was unknown whether other neurophysiological substrates, such as the speech network, could be used to further improve on or complement existing motor-based control paradigms. We demonstrate here for the first time that ECoG signals associated with different overt and imagined phoneme articulation can enable invasively monitored human patients to control a one-dimensional computer cursor rapidly and accurately. This phonetic content was distinguishable within higher gamma frequency oscillations and enabled users to achieve final target accuracies between 68% and 91% within 15 min. Additionally, one of the patients achieved robust control using recordings from a microarray consisting of 1 mm spaced microwires. These findings suggest that the cortical network associated with speech could provide an additional cognitive and physiologic substrate for BCI operation and that these signals can be acquired from a cortical array that is small and minimally invasive.

  4. Using the Electrocorticographic Speech Network to Control a Brain-Computer Interface in Humans

    Science.gov (United States)

    Leuthardt, Eric C.; Gaona, Charles; Sharma, Mohit; Szrama, Nicholas; Roland, Jarod; Freudenberg, Zac; Solis, Jamie; Breshears, Jonathan; Schalk, Gerwin

    2013-01-01

    Electrocorticography (ECoG) has emerged as a new signal platform for brain-computer interface (BCI) systems. Classically, the cortical physiology that has been commonly investigated and utilized for device control in humans has been brain signals from sensorimotor cortex. Hence, it was unknown whether other neurophysiological substrates, such as the speech network, could be used to further improve on or complement existing motor-based control paradigms. We demonstrate here for the first time that ECoG signals associated with different overt and imagined phoneme articulation can enable invasively monitored human patients to control a one-dimensional computer cursor rapidly and accurately. This phonetic content was distinguishable within higher gamma frequency oscillations and enabled users to achieve final target accuracies between 68 and 91% within 15 minutes. Additionally, one of the patients achieved robust control using recordings from a microarray consisting of 1 mm spaced microwires. These findings suggest that the cortical network associated with speech could provide an additional cognitive and physiologic substrate for BCI operation and that these signals can be acquired from a cortical array that is small and minimally invasive. PMID:21471638

  5. Advanced Power Electronic Interfaces for Distributed Energy Systems Part 1: Systems and Topologies

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, W.; Chakraborty, S.; Kroposki, B.; Thomas, H.

    2008-03-01

    This report summarizes power electronic interfaces for DE applications and the topologies needed for advanced power electronic interfaces. It focuses on photovoltaic, wind, microturbine, fuel cell, internal combustion engine, battery storage, and flywheel storage systems.

  6. Brain-Computer Interface for Control of Wheelchair Using Fuzzy Neural Networks

    Directory of Open Access Journals (Sweden)

    Rahib H. Abiyev

    2016-01-01

    Full Text Available The design of brain-computer interface for the wheelchair for physically disabled people is presented. The design of the proposed system is based on receiving, processing, and classification of the electroencephalographic (EEG signals and then performing the control of the wheelchair. The number of experimental measurements of brain activity has been done using human control commands of the wheelchair. Based on the mental activity of the user and the control commands of the wheelchair, the design of classification system based on fuzzy neural networks (FNN is considered. The design of FNN based algorithm is used for brain-actuated control. The training data is used to design the system and then test data is applied to measure the performance of the control system. The control of the wheelchair is performed under real conditions using direction and speed control commands of the wheelchair. The approach used in the paper allows reducing the probability of misclassification and improving the control accuracy of the wheelchair.

  7. Promoting Social Network Awareness: A Social Network Monitoring System

    Science.gov (United States)

    Cadima, Rita; Ferreira, Carlos; Monguet, Josep; Ojeda, Jordi; Fernandez, Joaquin

    2010-01-01

    To increase communication and collaboration opportunities, members of a community must be aware of the social networks that exist within that community. This paper describes a social network monitoring system--the KIWI system--that enables users to register their interactions and visualize their social networks. The system was implemented in a…

  8. Brain-machine interface circuits and systems

    CERN Document Server

    Zjajo, Amir

    2016-01-01

    This book provides a complete overview of significant design challenges in respect to circuit miniaturization and power reduction of the neural recording system, along with circuit topologies, architecture trends, and (post-silicon) circuit optimization algorithms. The introduced novel circuits for signal conditioning, quantization, and classification, as well as system configurations focus on optimized power-per-area performance, from the spatial resolution (i.e. number of channels), feasible wireless data bandwidth and information quality to the delivered power of implantable system.

  9. Reservation system with graphical user interface

    KAUST Repository

    Mohamed, Mahmoud A. Abdelhamid

    2012-01-05

    Techniques for providing a reservation system are provided. The techniques include displaying a scalable visualization object, wherein the scalable visualization object comprises an expanded view element of the reservation system depicting information in connection with a selected interval of time and a compressed view element of the reservation system depicting information in connection with one or more additional intervals of time, maintaining a visual context between the expanded view and the compressed view within the visualization object, and enabling a user to switch between the expanded view and the compressed view to facilitate use of the reservation system.

  10. Plant systems biology: network matters.

    Science.gov (United States)

    Lucas, Mikaël; Laplaze, Laurent; Bennett, Malcolm J

    2011-04-01

    Systems biology is all about networks. A recent trend has been to associate systems biology exclusively with the study of gene regulatory or protein-interaction networks. However, systems biology approaches can be applied at many other scales, from the subatomic to the ecosystem scales. In this review, we describe studies at the sub-cellular, tissue, whole plant and crop scales and highlight how these studies can be related to systems biology. We discuss the properties of system approaches at each scale as well as their current limits, and pinpoint in each case advances unique to the considered scale but representing potential for the other scales. We conclude by examining plant models bridging different scales and considering the future prospects of plant systems biology. © 2011 Blackwell Publishing Ltd.

  11. Network video transmission system based on SOPC

    Science.gov (United States)

    Zhang, Zhengbing; Deng, Huiping; Xia, Zhenhua

    2008-03-01

    Video systems have been widely used in many fields such as conferences, public security, military affairs and medical treatment. With the rapid development of FPGA, SOPC has been paid great attentions in the area of image and video processing in recent years. A network video transmission system based on SOPC is proposed in this paper for the purpose of video acquisition, video encoding and network transmission. The hardware platform utilized to design the system is an SOPC board of model Altera's DE2, which includes an FPGA chip of model EP2C35F672C6, an Ethernet controller and a video I/O interface. An IP core, known as Nios II embedded processor, is used as the CPU of the system. In addition, a hardware module for format conversion of video data, and another module to realize Motion-JPEG have been designed with Verilog HDL. These two modules are attached to the Nios II processor as peripheral equipments through the Avalon bus. Simulation results show that these two modules work as expected. Uclinux including TCP/IP protocol as well as the driver of Ethernet controller is chosen as the embedded operating system and an application program scheme is proposed.

  12. Networks, linkages, and migration systems.

    Science.gov (United States)

    Fawcett, J T

    1989-01-01

    Recent theoretical interest in migration systems calls attention to the functions of diverse linkages between countries in stimulating, directing,and maintaining international flows of people. This article proposes a conceptual framework for the non-people linkages in international migration systems and discusses the implications for population movement of the 4 categories and 3 types of linkages that define the network. The 4 categories include 1) state to state relations, 2) mass culture connections, 3) family and personal networks, and 4) migrant agency activities. The 3 types of linkages are 1) tangible linkages, 2) regulatory linkages, and 3) relational linkages.

  13. Semiotic user interface analysis of building information model systems

    NARCIS (Netherlands)

    Hartmann, Timo

    2013-01-01

    To promote understanding of how to use building information (BI) systems to support communication, this paper uses computer semiotic theory to study how user interfaces of BI systems operate as a carrier of meaning. More specifically, the paper introduces a semiotic framework for the analysis of BI

  14. Network operating system focus technology

    Science.gov (United States)

    1985-01-01

    An activity structured to provide specific design requirements and specifications for the Space Station Data Management System (DMS) Network Operating System (NOS) is outlined. Examples are given of the types of supporting studies and implementation tasks presently underway to realize a DMS test bed capability to develop hands-on understanding of NOS requirements as driven by actual subsystem test beds participating in the overall Johnson Space Center test bed program. Classical operating system elements and principal NOS functions are listed.

  15. Systems and technologies for high-speed inter-office/datacenter interface

    Science.gov (United States)

    Sone, Y.; Nishizawa, H.; Yamamoto, S.; Fukutoku, M.; Yoshimatsu, T.

    2017-01-01

    Emerging requirements for inter-office/inter-datacenter short reach links for data center interconnects (DCI) and metro transport networks have led to various inter-office and inter-datacenter optical interface technologies. These technologies are bringing significant changes to systems and network architectures. In this paper, we present a system and ZR optical interface technologies for DCI and metro transport networks, then introduce the latest challenges facing the system framework. There are two trends in reach extension; one is to use Ethernet and the other is to use digital coherent technologies. The first approach achieves reach extension while using as many existing Ethernet components as possible. It offers low costs as reuses the cost-effective components created for the large Ethernet market. The second approach adopts low-cost and low power coherent DSPs that implement the minimal set long haul transmission functions. This paper introduces an architecture that integrates both trends. The architecture satisfies both datacom and telecom needs with a common control and management interface and automated configuration.

  16. Networked control of microgrid system of systems

    Science.gov (United States)

    Mahmoud, Magdi S.; Rahman, Mohamed Saif Ur; AL-Sunni, Fouad M.

    2016-08-01

    The microgrid has made its mark in distributed generation and has attracted widespread research. However, microgrid is a complex system which needs to be viewed from an intelligent system of systems perspective. In this paper, a network control system of systems is designed for the islanded microgrid system consisting of three distributed generation units as three subsystems supplying a load. The controller stabilises the microgrid system in the presence of communication infractions such as packet dropouts and delays. Simulation results are included to elucidate the effectiveness of the proposed control strategy.

  17. Proposing an Abstracted Interface and Protocol for Computer Systems.

    Energy Technology Data Exchange (ETDEWEB)

    Resnick, David Richard [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ignatowski, Mike [AMD

    2014-07-01

    While it made sense for historical reasons to develop different interfaces and protocols for memory channels, CPU to CPU interactions, and I/O devices, ongoing developments in the computer industry are leading to more converged requirements and physical implementations for these interconnects. As it becomes increasingly common for advanced components to contain a variety of computational devices as well as memory, the distinction between processors, memory, accelerators, and I/O devices become s increasingly blur red. As a result, the interface requirements among such components are converging. There is also a wide range of new disruptive technologies that will impact the computer market in the coming years , including 3D integration and emerging NVRAM memory. Optimal exploitation of these technologies cannot be done with the existing memory , storage, and I/O interface standards. The computer industry has historically made major advances when industry players have been able to add innovation behind a standard interface. The standard interface provides a large market for their products and enable s relatively quick and widespread adoption. To enable a new wave of innovation in the form of advanced memory products and accelerators, we need a new standard interface explicitly design ed to provide both the performance and flexibility to support new system integration solutions.

  18. Proposing an Abstracted Interface and Protocol for Computer Systems.

    Energy Technology Data Exchange (ETDEWEB)

    Resnick, David Richard [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Ignatowski, Mike [AMD Research

    2014-07-01

    While it made sense for historical reasons to develop different interfaces and protocols for memory channels, CPU to CPU interactions, and I/O devices, ongoing developments in the computer industry are leading to more converged requirements and physical implementations for these interconnects. As it becomes increasingly common for advanced components to contain a variety of computational devices as well as memory, the distinction between processors, memory, accelerators, and I/O devices become s increasingly blurred. As a result, the interface requirements among such components are converging. There is also a wide range of new disruptive technologies that will impact the computer market in the coming years , including 3D integration and emerging NVRAM memory. Optimal exploitation of these technologies cannot be done with the existing memory, storage, and I/O interface standards. The computer industry has historically made major advances when industry players have been able to add innovation behind a standard interface. The standard interface provides a large market for their products and enables relatively quick and widespread adoption. To enable a new wave of innovation in the form of advanced memory products and accelerators, we need a new standard interface explicitly designed to provide both the performance and flexibility to support new system integration solutions.

  19. Guidance for human interface with artificial intelligence systems

    Science.gov (United States)

    Potter, Scott S.; Woods, David D.

    1991-01-01

    The beginning of a research effort to collect and integrate existing research findings about how to combine computer power and people is discussed, including problems and pitfalls as well as desirable features. The goal of the research is to develop guidance for the design of human interfaces with intelligent systems. Fault management tasks in NASA domains are the focus of the investigation. Research is being conducted to support the development of guidance for designers that will enable them to make human interface considerations into account during the creation of intelligent systems.

  20. Interface Impacts System to Zone Transition

    Science.gov (United States)

    1989-05-01

    focused .on specific problems and opportunities. Much has beenwritten abouthe Ishikawajima - Harima Heavy Industries (IHI) System, which includes: 1...advanced planning would have created even more significant Since FFG-54, TLA has negotiated a technology transfer program with Mitsubishi Heavy Industries ...istration, the United States Navy, the Society of Naval Architects and Marine Engineers, and the U.S. shipbuilding industry . TABLE OF CONTENTS 2.0 3.0

  1. Federated Ground Station Network Model and Interface Specification

    Science.gov (United States)

    2014-12-01

    23 III. FGN INFORMATION SECURITY SCHEMES ............................................... 25 A. INFORMATION SECURITY OVERVIEW ...Abstract Syntax Notation 1 BPSK binary phase-shift keying CA central authority CCSDS Consultative Committee for Space Data Systems CGA Neptune ...Authorization—limit who is allowed to use their resources A. INFORMATION SECURITY OVERVIEW The first three concepts form the Confidentiality, Integrity

  2. Design of natural user interface of indoor surveillance system

    Science.gov (United States)

    Jia, Lili; Liu, Dan; Jiang, Mu-Jin; Cao, Ning

    2015-03-01

    Conventional optical video surveillance systems usually just record what they view, but they can't make sense of what they are viewing. With lots of useless video information stored and transmitted, waste of memory space and increasing the bandwidth are produced every day. In order to reduce the overall cost of the system, and improve the application value of the monitoring system, we use the Kinect sensor with CMOS infrared sensor, as a supplement to the traditional video surveillance system, to establish the natural user interface system for indoor surveillance. In this paper, the architecture of the natural user interface system, complex background monitoring object separation, user behavior analysis algorithms are discussed. By the analysis of the monitoring object, instead of the command language grammar, when the monitored object need instant help, the system with the natural user interface sends help information. We introduce the method of combining the new system and traditional monitoring system. In conclusion, theoretical analysis and experimental results in this paper show that the proposed system is reasonable and efficient. It can satisfy the system requirements of non-contact, online, real time, higher precision and rapid speed to control the state of affairs at the scene.

  3. Network centrality of metro systems.

    Directory of Open Access Journals (Sweden)

    Sybil Derrible

    Full Text Available Whilst being hailed as the remedy to the world's ills, cities will need to adapt in the 21(st century. In particular, the role of public transport is likely to increase significantly, and new methods and technics to better plan transit systems are in dire need. This paper examines one fundamental aspect of transit: network centrality. By applying the notion of betweenness centrality to 28 worldwide metro systems, the main goal of this paper is to study the emergence of global trends in the evolution of centrality with network size and examine several individual systems in more detail. Betweenness was notably found to consistently become more evenly distributed with size (i.e. no "winner takes all" unlike other complex network properties. Two distinct regimes were also observed that are representative of their structure. Moreover, the share of betweenness was found to decrease in a power law with size (with exponent 1 for the average node, but the share of most central nodes decreases much slower than least central nodes (0.87 vs. 2.48. Finally the betweenness of individual stations in several systems were examined, which can be useful to locate stations where passengers can be redistributed to relieve pressure from overcrowded stations. Overall, this study offers significant insights that can help planners in their task to design the systems of tomorrow, and similar undertakings can easily be imagined to other urban infrastructure systems (e.g., electricity grid, water/wastewater system, etc. to develop more sustainable cities.

  4. FELIX: a High-Throughput Network Approach for Interfacing to Front End Electronics for ATLAS Upgrades

    CERN Document Server

    Anderson, John Thomas; The ATLAS collaboration; Boterenbrood, Hendrik; Chen, Hucheng; Chen, Kai; Drake, Gary; Francis, David; Gorini, Benedetto; Lanni, Francesco; Lehmann Miotto, Giovanna; Levinson, Lorne; Narevicius, Julia; Plessl, Christian; Roich, Alexander; Ryu, Soo; Schreuder, Frans Philip; Schumacher, Jorn; Vandelli, Wainer; Vermeulen, Jos; Zhang, Jinlong

    2015-01-01

    The ATLAS experiment at CERN is planning full deployment of a new unified optical link technology for connecting detector front end electronics on the timescale of the LHC Run 4 (2025). It is estimated that roughly 8000 GBT (GigaBit Transceiver) links, with transfer rates up to 10.24~Gbps, will replace existing links used for readout, detector control and distribution of timing and trigger information. A new class of devices will be needed to interface many GBT links to the rest of the trigger, data-acquisition and detector control systems. In this paper FELIX (Front End LInk eXchange) is presented, a PC-based device to route data from and to multiple GBT links via a high-performance general purpose network capable of a total throughput up to O(20 Tbps). FELIX implies architectural changes to the ATLAS data acquisition system, such as the use of industry standard COTS components early in the DAQ chain. Additionally the design and implementation of a FELIX demonstration platform is presented, and hardware and ...

  5. Multiscale Photonic Data Fusion Networks and Their Interfaces

    Science.gov (United States)

    1998-03-01

    enhanced digital information services, such as high-resolution multimedia images , video-on- demand, and high definition television, require the storage of...and higher data rates. The number of data bits is also limited, however, by the imaging system, noise effects of the memory medium, and the...are similar to a given query image . However, the meaning of similarity is quite vague. It might refer to the similarity in color appearance of pictures

  6. Efficient Strategies for Active Interface-Level Network Topology Discovery

    Science.gov (United States)

    2013-09-01

    massive outage of services globally. There are other similar projects at Ark that are dedicated to Internet topology research, including Dolphin [3... Dolphin : The measurement system for the next generation Internet,” in 4th International Conference on Communications, Internet and Information... evolution of the Internet’s AS-level topology,” in IEEE International Conference on Computer Communications, pp. 1–12, 2006. [23] Y.-J. Chi, R

  7. Systems engineering technology for networks

    Science.gov (United States)

    1994-01-01

    The report summarizes research pursued within the Systems Engineering Design Laboratory at Virginia Polytechnic Institute and State University between May 16, 1993 and January 31, 1994. The project was proposed in cooperation with the Computational Science and Engineering Research Center at Howard University. Its purpose was to investigate emerging systems engineering tools and their applicability in analyzing the NASA Network Control Center (NCC) on the basis of metrics and measures.

  8. The LILARTI neural network system

    Energy Technology Data Exchange (ETDEWEB)

    Allen, J.D. Jr.; Schell, F.M.; Dodd, C.V.

    1992-10-01

    The material of this Technical Memorandum is intended to provide the reader with conceptual and technical background information on the LILARTI neural network system of detail sufficient to confer an understanding of the LILARTI method as it is presently allied and to facilitate application of the method to problems beyond the scope of this document. Of particular importance in this regard are the descriptive sections and the Appendices which include operating instructions, partial listings of program output and data files, and network construction information.

  9. Interfacing Physiologically-Based Pharmacokinetic Modeling and Simulation Systems

    Science.gov (United States)

    1992-01-01

    by the circulatory system . The membrane- urations by setting appropriate terms equal to zero. Pharmacokinedtc Modeling 115 Table B describes the...and thermodynamic properties of the drug. versal elementary dosing regimen (Sebalt and Krecft, 1987)) Currently available software systems that use...TID85 92-19538 AD-P007 117 Interfacing Physiologically-based Pharmacokincic Modeling and Simulation Systems Derek B. Janszen and M.C. Miller, H11

  10. Guide to the Stand-Damage Model interface management system

    Science.gov (United States)

    George Racin; J. J. Colbert

    1995-01-01

    This programmer's support document describes the Gypsy Moth Stand-Damage Model interface management system. Management of stand-damage data made it necessary to define structures to store data and provide the mechanisms to manipulate these data. The software provides a user-friendly means to manipulate files, graph and manage outputs, and edit input data. The...

  11. Speech control interface for Eurocontrol’s LINK2000+ system

    Directory of Open Access Journals (Sweden)

    Dan-Cristian ION

    2012-06-01

    Full Text Available This paper continues recent research of the authors, considering the use of speech recognition in air traffic control. It proposes the use of a voice control interface for Eurocontrol’s LINK2000+ system, offering an alternative means to improve air transport safety and efficiency.

  12. Network Performance Evaluation of Abis Interface over DVB-S2 in the GSM over Satellite Network

    Directory of Open Access Journals (Sweden)

    S. B. Musabekov

    2010-01-01

    Full Text Available This paper deals with establishing a GSM link over Satellite. Abis interface, which is defined between Base Transceiver Station (BTS and Base Station Controller (BSC, in a GSM network is considered here to be routed over the Satellite. The satellite link enables a quick and cost-effective GSM link in meagerly populated areas. A different scenario comparison was done to understand the impact of Satellite environment on network availability comparing to terrestrial scenario. We have implemented an Abis interface over DVB S2 in NS2 and evaluated the performance over the high delay and loss satellite channel. Network performance was evaluated with respect to Satellite channel delay and DVB S2 encapsulation efficiency under different amount of user traffic and compared with the terrestrial scenario. The results clearly showed an increased amount of SDCCH and TCH channels required in the case of satellite scenario for the same amount of traffic in comparison to conventional terrestrial scenario. We have optimized the parameters based on the simulation results. Link budget estimation considering DVB-S2 platform was done to find satellite bandwidth and cost requirements for different network setups.

  13. Functional Interface Considerations within an Exploration Life Support System Architecture

    Science.gov (United States)

    Perry, Jay L.; Sargusingh, Miriam J.; Toomarian, Nikzad

    2016-01-01

    As notional life support system (LSS) architectures are developed and evaluated, myriad options must be considered pertaining to process technologies, components, and equipment assemblies. Each option must be evaluated relative to its impact on key functional interfaces within the LSS architecture. A leading notional architecture has been developed to guide the path toward realizing future crewed space exploration goals. This architecture includes atmosphere revitalization, water recovery and management, and environmental monitoring subsystems. Guiding requirements for developing this architecture are summarized and important interfaces within the architecture are discussed. The role of environmental monitoring within the architecture is described.

  14. User Interface Technology Transfer to NASA's Virtual Wind Tunnel System

    Science.gov (United States)

    vanDam, Andries

    1998-01-01

    Funded by NASA grants for four years, the Brown Computer Graphics Group has developed novel 3D user interfaces for desktop and immersive scientific visualization applications. This past grant period supported the design and development of a software library, the 3D Widget Library, which supports the construction and run-time management of 3D widgets. The 3D Widget Library is a mechanism for transferring user interface technology from the Brown Graphics Group to the Virtual Wind Tunnel system at NASA Ames as well as the public domain.

  15. Optical mass memory system (AMM-13). AMM/DBMS interface control document

    Science.gov (United States)

    Bailey, G. A.

    1980-01-01

    The baseline for external interfaces of a 10 to the 13th power bit, optical archival mass memory system (AMM-13) is established. The types of interfaces addressed include data transfer; AMM-13, Data Base Management System, NASA End-to-End Data System computer interconnect; data/control input and output interfaces; test input data source; file management; and facilities interface.

  16. Ecological user interface for emergency management decision support systems

    DEFF Research Database (Denmark)

    Andersen, V.

    2003-01-01

    The user interface for decision support systems is normally structured for presenting relevant data for the skilled user in order to allow fast assessment and action of the hazardous situation, or for more complex situations to present the relevant rules and procedures to be followed in order...... to deal most efficiently with the situation. For situations not foreseen, however, no rules exist, and no support may be given to the user by suggested actions to be fulfilled. The idea of ecological user interface is to present to the user the complete situation at various interrelated levels...... of abstraction supporting the situation assessment and remedial actions based on the domain knowledge of the user. The concept of ecological user interface has been tested and appreciated in a variety of other domains using prototypes designed to be representative of industrial processes. The purpose...

  17. Development traumatic brain injury computer user interface for disaster area in Indonesia supported by emergency broadband access network.

    Science.gov (United States)

    Sutiono, Agung Budi; Suwa, Hirohiko; Ohta, Toshizumi; Arifin, Muh Zafrullah; Kitamura, Yohei; Yoshida, Kazunari; Merdika, Daduk; Qiantori, Andri; Iskandar

    2012-12-01

    Disasters bring consequences of negative impacts on the environment and human life. One of the common cause of critical condition is traumatic brain injury (TBI), namely, epidural (EDH) and subdural hematoma (SDH), due to downfall hard things during earthquake. We proposed and analyzed the user response, namely neurosurgeon, general doctor/surgeon and nurse when they interacted with TBI computer interface. The communication systems was supported by TBI web based applications using emergency broadband access network with tethered balloon and simulated in the field trial to evaluate the coverage area. The interface consisted of demography data and multi tabs for anamnesis, treatment, follow up and teleconference interfaces. The interface allows neurosurgeon, surgeon/general doctors and nurses to entry the EDH and SDH patient's data during referring them on the emergency simulation and evaluated based on time needs and their understanding. The average time needed was obtained after simulated by Lenovo T500 notebook using mouse; 8-10 min for neurosurgeons, 12-15 min for surgeons/general doctors and 15-19 min for nurses. By using Think Pad X201 Tablet, the time needed for entry data was 5-7 min for neurosurgeon, 7-10 min for surgeons/general doctors and 12-16 min for nurses. We observed that the time difference was depending on the computer type and user literacy qualification as well as their understanding on traumatic brain injury, particularly for the nurses. In conclusion, there are five data classification for simply TBI GUI, namely, 1) demography, 2) specific anamnesis for EDH and SDH, 3) treatment action and medicine of TBI, 4) follow up data display and 5) teleneurosurgery for streaming video consultation. The type of computer, particularly tablet PC was more convenient and faster for entry data, compare to that computer mouse touched pad. Emergency broadband access network using tethered balloon is possible to be employed to cover the communications systems in

  18. Ensemble of Neural Network Conditional Random Fields for Self-Paced Brain Computer Interfaces

    Directory of Open Access Journals (Sweden)

    Hossein Bashashati

    2017-07-01

    Full Text Available Classification of EEG signals in self-paced Brain Computer Interfaces (BCI is an extremely challenging task. The main difficulty stems from the fact that start time of a control task is not defined. Therefore it is imperative to exploit the characteristics of the EEG data to the extent possible. In sensory motor self-paced BCIs, while performing the mental task, the user’s brain goes through several well-defined internal state changes. Applying appropriate classifiers that can capture these state changes and exploit the temporal correlation in EEG data can enhance the performance of the BCI. In this paper, we propose an ensemble learning approach for self-paced BCIs. We use Bayesian optimization to train several different classifiers on different parts of the BCI hyper- parameter space. We call each of these classifiers Neural Network Conditional Random Field (NNCRF. NNCRF is a combination of a neural network and conditional random field (CRF. As in the standard CRF, NNCRF is able to model the correlation between adjacent EEG samples. However, NNCRF can also model the nonlinear dependencies between the input and the output, which makes it more powerful than the standard CRF. We compare the performance of our algorithm to those of three popular sequence labeling algorithms (Hidden Markov Models, Hidden Markov Support Vector Machines and CRF, and to two classical classifiers (Logistic Regression and Support Vector Machines. The classifiers are compared for the two cases: when the ensemble learning approach is not used and when it is. The data used in our studies are those from the BCI competition IV and the SM2 dataset. We show that our algorithm is considerably superior to the other approaches in terms of the Area Under the Curve (AUC of the BCI system.

  19. HYBRID SHEARWALL SYSTEM — SHEAR STRENGTH AT THE INTERFACE CONNECTION

    Directory of Open Access Journals (Sweden)

    Ulrich Wirth

    2013-12-01

    Full Text Available Based on a series of alternating, displacement-controlled load tests on ten one-third scale models, to study the behaviour of the interface of a hybrid shear wall system, it was proved that the concept of hybrid construction in earthquake prone regions is feasible. The hybrid shear-wall system consists of typical reinforced concrete shear walls with composite edge members or flanges. Ten different anchorage bar arrangements were developed and tested to evaluate the column-shearwall interface behaviour under cyclic shear forces acting along the interface between column and wall panel. Finite element models of the test specimens were developed that were capable of capturing the integrated concrete and reinforcing steel behaviour in the wall panels. Special models were  developed to capture the interface behaviour between the edge columns and the shear wall. A comparison between the experimental results and the numerical results shows excellent agreement, and clearly supports the validity of the model developed for predicting the non-linear response of the hybrid wall system under various load conditions.

  20. A FPGA-based Network Interface Card with GPUDirect enabling realtime GPU computing in HEP experiments

    OpenAIRE

    Lonardo, Alessandro; Ameli, Fabrizio; Ammendola, Roberto; Biagioni, Andrea; Cotta Ramusino, Angelo; Fiorini, Massimiliano; Frezza, Ottorino; Lamanna, Gianluca; Lo Cicero, Francesca; Martinelli, Michele; Neri, Ilaria; Paolucci, Pier Stanislao; Pastorelli, Elena; Pontisso, Luca; Rossetti, Davide

    2015-01-01

    The capability of processing high bandwidth data streams in real-time is a computational requirement common to many High Energy Physics experiments. Keeping the latency of the data transport tasks under control is essential in order to meet this requirement. We present NaNet, a FPGA-based PCIe Network Interface Card design featuring Remote Direct Memory Access towards CPU and GPU memories plus a transport protocol offload module characterized by cycle-accurate upper-bound handling. The combin...

  1. Deep Space Network information system architecture study

    Science.gov (United States)

    Beswick, C. A.; Markley, R. W. (Editor); Atkinson, D. J.; Cooper, L. P.; Tausworthe, R. C.; Masline, R. C.; Jenkins, J. S.; Crowe, R. A.; Thomas, J. L.; Stoloff, M. J.

    1992-01-01

    The purpose of this article is to describe an architecture for the DSN information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990's. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies--i.e., computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control.

  2. The Distributed Common Ground System-Army User Interface

    Science.gov (United States)

    2015-06-12

    analysts ability to gather, analyze and share significant amounts of information pulled into a common environment, and enhances Soldier situational ...and lessons learned. The AARs and lessons learned present clear issues to Army leadership about the problems facing DCGS-A. Recommendations to have...chapter can be applied to the development of new systems and user interfaces. The case studies of software system failures at the IRS, Hershey

  3. Research and Implementation of a USB Interfaced Real-Time Power Quality Disturbance Classification System

    Directory of Open Access Journals (Sweden)

    GOK, M.

    2017-08-01

    Full Text Available In this study, the research and implementation of an automatic power quality (PQ recognition system are presented. This system contains a USB interfaced multichannel data acquisition (DAQ device and a graphical user interfaced (GUI application. The DAQ device consists of an analog-to-digital (ADC converter, field programmable gate array (FPGA and a USB first in first out (FIFO buffer interface chip. The application employs Stockwell Transform (ST technique combined with neural network model to build the classifier. Eight basic and two combined PQ disturbances are determined for the classification. Different from the previous studies, the synthetic signals used for neural network training are modified by adding the harmonics detected in the real signal. This approach is used to increase the classifier accuracy against the real line power signal. Also, ST is simplified by using only the frequencies which are required in the feature extraction step to reduce the processing time. Developed application handles the signal processing, the classification, and the database recording tasks by using multi-threaded programming approach under the mean time of 41 ms. The experimental results show that the proposed power quality disturbance detection system is capable of recognizing and reporting power quality faults effectively within the real-time requirements.

  4. Development of Graphical User Interface Student Electoral System

    Directory of Open Access Journals (Sweden)

    Challiz Delima- Omorog

    2016-08-01

    Full Text Available The study was conducted to design and obtain evidence concerning the software quality and acceptance of a graphical user interface (GUI student electoral voting system. The intention of this research is three-fold; firstly, a system based on ISO 9126 software quality characteristics, secondly, a system that conforms to the current hardware and software standard and lastly, improve student participation to decision-making. Designing a usable system in the context of the user’s perception (needs and let these perceptions dictate the design is therefore a great challenge. This study used descriptivedevelopment research method. Data were collected thru guided interviews and survey questionnaires from the respondents. The researcher adopted the Princeton Development Methodology through the entire life cycle of the software development process. A very substantial majority of the respondents stated that for them, the new voting system is highly acceptable as compared to the old system both in terms of development (maintainability and portability and implementation (efficiency, functionality, reliability and usability requirements of the ISO 9126. The researcher came to conclude that usability is tied to the four software characteristics. Users’ perception about software quality-implementation requirement is correlated specifically with usability. Based on data and the problems encountered, respondents’ placed low importance on metrics if it is not well represented in the interface. When the interface fails, users are more likely to take longer to vote, failing efficiency targets and be less reliable, weakening functionality

  5. Facsimile Network System in RCP

    Science.gov (United States)

    Muramatsu, Kazuya

    Recruit Computer Print Corp. has compiled Weekly Housing Magazine by use of its own CTS (Computerized Type Setting) resulting in the real estate database as byproduct. Based on the database it has made the network linking with sponsors, real estate companies. It has transmitted lists for data cleaning directly from computer enabling to save manpower and reduce time in the compilation process. The author describes the objectives, details, functions and promise of the system.

  6. Precise Network Modeling of Systems Genetics Data Using the Bayesian Network Webserver.

    Science.gov (United States)

    Ziebarth, Jesse D; Cui, Yan

    2017-01-01

    The Bayesian Network Webserver (BNW, http://compbio.uthsc.edu/BNW ) is an integrated platform for Bayesian network modeling of biological datasets. It provides a web-based network modeling environment that seamlessly integrates advanced algorithms for probabilistic causal modeling and reasoning with Bayesian networks. BNW is designed for precise modeling of relatively small networks that contain less than 20 nodes. The structure learning algorithms used by BNW guarantee the discovery of the best (most probable) network structure given the data. To facilitate network modeling across multiple biological levels, BNW provides a very flexible interface that allows users to assign network nodes into different tiers and define the relationships between and within the tiers. This function is particularly useful for modeling systems genetics datasets that often consist of multiscalar heterogeneous genotype-to-phenotype data. BNW enables users to, within seconds or minutes, go from having a simply formatted input file containing a dataset to using a network model to make predictions about the interactions between variables and the potential effects of experimental interventions. In this chapter, we will introduce the functions of BNW and show how to model systems genetics datasets with BNW.

  7. Medical Data Manager an Interface between PACS and the gLite Data Management System

    CERN Document Server

    Montagnat, Johan; Texier, Romain; Nienartowicz, Krzysztof; Baud, Jean-Philippe

    2008-01-01

    The medical imaging community uses the DICOM image format and protocol to store and exchange data. The Medical Data Manager (MDM) is an interface between DICOM compliant systems such as PACS and the EGEE Data Management System. It opens hospital imaging networks to the world scale Grid while protecting sensitive medical data. It can be accessed transparently from any gLite service. It is an important milestone towards adoption of Grid technologies in the medical imaging community. Hospitals continuously produce tremendous amounts of image data that is managed by local PACS (Picture Archiving and Communication Systems). These systems are often limited to a local network access although the community experiences a growing interest for data sharing and remote processing. Indeed, patient data is often spread out different medical data acquisition centers. Furthermore, researchers in the area often need to analyze large populations whose data can be gathered through federations of PACS. Opening PACS to the outer I...

  8. Bluetooth Roaming for Sensor Network System in Clinical Environment.

    Science.gov (United States)

    Kuroda, Tomohiro; Noma, Haruo; Takase, Kazuhiko; Sasaki, Shigeto; Takemura, Tadamasa

    2015-01-01

    A sensor network is key infrastructure for advancing a hospital information system (HIS). The authors proposed a method to provide roaming functionality for Bluetooth to realize a Bluetooth-based sensor network, which is suitable to connect clinical devices. The proposed method makes the average response time of a Bluetooth connection less than one second by making the master device repeat the inquiry process endlessly and modifies parameters of the inquiry process. The authors applied the developed sensor network for daily clinical activities in an university hospital, and confirmed the stabilitya and effectiveness of the sensor network. As Bluetooth becomes a quite common wireless interface for medical devices, the proposed protocol that realizes Bluetooth-based sensor network enables HIS to equip various clinical devices and, consequently, lets information and communication technologies advance clinical services.

  9. Network Centrality of Metro Systems

    Science.gov (United States)

    Derrible, Sybil

    2012-01-01

    Whilst being hailed as the remedy to the world’s ills, cities will need to adapt in the 21st century. In particular, the role of public transport is likely to increase significantly, and new methods and technics to better plan transit systems are in dire need. This paper examines one fundamental aspect of transit: network centrality. By applying the notion of betweenness centrality to 28 worldwide metro systems, the main goal of this paper is to study the emergence of global trends in the evolution of centrality with network size and examine several individual systems in more detail. Betweenness was notably found to consistently become more evenly distributed with size (i.e. no “winner takes all”) unlike other complex network properties. Two distinct regimes were also observed that are representative of their structure. Moreover, the share of betweenness was found to decrease in a power law with size (with exponent 1 for the average node), but the share of most central nodes decreases much slower than least central nodes (0.87 vs. 2.48). Finally the betweenness of individual stations in several systems were examined, which can be useful to locate stations where passengers can be redistributed to relieve pressure from overcrowded stations. Overall, this study offers significant insights that can help planners in their task to design the systems of tomorrow, and similar undertakings can easily be imagined to other urban infrastructure systems (e.g., electricity grid, water/wastewater system, etc.) to develop more sustainable cities. PMID:22792373

  10. A microfluidic platform for size-dependent generation of droplet interface bilayer networks on rails

    Science.gov (United States)

    Carreras, P.; Elani, Y.; Law, R. V.; Brooks, N. J.; Seddon, J. M.; Ces, O.

    2015-01-01

    Droplet interface bilayer (DIB) networks are emerging as a cornerstone technology for the bottom up construction of cell-like and tissue-like structures and bio-devices. They are an exciting and versatile model-membrane platform, seeing increasing use in the disciplines of synthetic biology, chemical biology, and membrane biophysics. DIBs are formed when lipid-coated water-in-oil droplets are brought together—oil is excluded from the interface, resulting in a bilayer. Perhaps the greatest feature of the DIB platform is the ability to generate bilayer networks by connecting multiple droplets together, which can in turn be used in applications ranging from tissue mimics, multicellular models, and bio-devices. For such applications, the construction and release of DIB networks of defined size and composition on-demand is crucial. We have developed a droplet-based microfluidic method for the generation of different sized DIB networks (300–1500 pl droplets) on-chip. We do this by employing a droplet-on-rails strategy where droplets are guided down designated paths of a chip with the aid of microfabricated grooves or “rails,” and droplets of set sizes are selectively directed to specific rails using auxiliary flows. In this way we can uniquely produce parallel bilayer networks of defined sizes. By trapping several droplets in a rail, extended DIB networks containing up to 20 sequential bilayers could be constructed. The trapped DIB arrays can be composed of different lipid types and can be released on-demand and regenerated within seconds. We show that chemical signals can be propagated across the bio-network by transplanting enzymatic reaction cascades for inter-droplet communication. PMID:26759638

  11. Neural network system for traffic flow management

    Science.gov (United States)

    Gilmore, John F.; Elibiary, Khalid J.; Petersson, L. E. Rickard

    1992-09-01

    Atlanta will be the home of several special events during the next five years ranging from the 1996 Olympics to the 1994 Super Bowl. When combined with the existing special events (Braves, Falcons, and Hawks games, concerts, festivals, etc.), the need to effectively manage traffic flow from surface streets to interstate highways is apparent. This paper describes a system for traffic event response and management for intelligent navigation utilizing signals (TERMINUS) developed at Georgia Tech for adaptively managing special event traffic flows in the Atlanta, Georgia area. TERMINUS (the original name given Atlanta, Georgia based upon its role as a rail line terminating center) is an intelligent surface street signal control system designed to manage traffic flow in Metro Atlanta. The system consists of three components. The first is a traffic simulation of the downtown Atlanta area around Fulton County Stadium that models the flow of traffic when a stadium event lets out. Parameters for the surrounding area include modeling for events during various times of day (such as rush hour). The second component is a computer graphics interface with the simulation that shows the traffic flows achieved based upon intelligent control system execution. The final component is the intelligent control system that manages surface street light signals based upon feedback from control sensors that dynamically adapt the intelligent controller's decision making process. The intelligent controller is a neural network model that allows TERMINUS to control the configuration of surface street signals to optimize the flow of traffic away from special events.

  12. An approach to design interface topologies across interdependent urban infrastructure systems

    Energy Technology Data Exchange (ETDEWEB)

    Ouyang Min, E-mail: min.ouyang@rice.edu [Department of Civil and Environmental Engineering, Rice University, 6100 Main Street, MS-318, TX 77005 (United States); Duenas-Osorio, Leonardo, E-mail: leonardo.duenas-osorio@rice.edu [Department of Civil and Environmental Engineering, Rice University, 6100 Main Street, MS-318, TX 77005 (United States)

    2011-11-15

    This paper proposes an approach to design or retrofit interface topologies to minimize cascading failures across urban infrastructure systems. Four types of interface design strategies are formulated based on maximum network component degree, maximum component betweenness, minimum Euclidean distance across components and component reliability rankings. To compute and compare strategy effectiveness under multiple hazard types, this paper introduces a global annual cascading failure effect (GACFE) metric as well as a GACFE-based cost improvement (GACI) metric. The GACI metric quantifies the improvement of the strategy effectiveness per kilometer increment of interdependent link length (ILL) relative to a reference strategy with minimum ILL. Taking as examples the power and gas transmission systems in Harris County, Texas, USA, optimum interface designs under random and hurricane hazards are discussed. Findings include that the strategy based on reliability rankings minimizes the GACFE metric, and decreases the GACI value relative to a reference practical strategy by 10-15% under different power grid safety margins. Such metrics will contribute to coupled utility system design or retrofit given that current guidelines or recommended practices in the utility industry mostly rely on minimum Euclidean distances and are yet to include interdependent effects in their provisions. - Highlights: > This paper offers interface topology design methods to reduce cascading failures. > Design strategies are judged by performance and cost metrics under multiple hazards. > Reliability-based interfaces globally outperform topological and distance designs. > Only low levels of extra link density and distance are needed for desired designs. > Interface distance relaxation is more effective at yielding maximum performance.

  13. Risk Interfaces to Support Integrated Systems Analysis and Development

    Science.gov (United States)

    Mindock, Jennifer; Lumpkins, Sarah; Shelhamer, Mark; Anton, Wilma; Havenhill, Maria

    2016-01-01

    Objectives for systems analysis capability: Develop integrated understanding of how a complex human physiological-socio-technical mission system behaves in spaceflight. Why? Support development of integrated solutions that prevent unwanted outcomes (Implementable approaches to minimize mission resources(mass, power, crew time, etc.)); Support development of tools for autonomy (need for exploration) (Assess and maintain resilience -individuals, teams, integrated system). Output of this exercise: -Representation of interfaces based on Human System Risk Board (HSRB) Risk Summary information and simple status based on Human Research Roadmap; Consolidated HSRB information applied to support communication; Point-of-Departure for HRP Element planning; Ability to track and communicate status of collaborations. 4

  14. Virtual reality interface devices in the reorganization of neural networks in the brain of patients with neurological diseases.

    Science.gov (United States)

    Gatica-Rojas, Valeska; Méndez-Rebolledo, Guillermo

    2014-04-15

    Two key characteristics of all virtual reality applications are interaction and immersion. Systemic interaction is achieved through a variety of multisensory channels (hearing, sight, touch, and smell), permitting the user to interact with the virtual world in real time. Immersion is the degree to which a person can feel wrapped in the virtual world through a defined interface. Virtual reality interface devices such as the Nintendo® Wii and its peripheral nunchuks-balance board, head mounted displays and joystick allow interaction and immersion in unreal environments created from computer software. Virtual environments are highly interactive, generating great activation of visual, vestibular and proprioceptive systems during the execution of a video game. In addition, they are entertaining and safe for the user. Recently, incorporating therapeutic purposes in virtual reality interface devices has allowed them to be used for the rehabilitation of neurological patients, e.g., balance training in older adults and dynamic stability in healthy participants. The improvements observed in neurological diseases (chronic stroke and cerebral palsy) have been shown by changes in the reorganization of neural networks in patients' brain, along with better hand function and other skills, contributing to their quality of life. The data generated by such studies could substantially contribute to physical rehabilitation strategies.

  15. Virtual reality interface devices in the reorganization of neural networks in the brain of patients with neurological diseases

    Science.gov (United States)

    Gatica-Rojas, Valeska; Méndez-Rebolledo, Guillermo

    2014-01-01

    Two key characteristics of all virtual reality applications are interaction and immersion. Systemic interaction is achieved through a variety of multisensory channels (hearing, sight, touch, and smell), permitting the user to interact with the virtual world in real time. Immersion is the degree to which a person can feel wrapped in the virtual world through a defined interface. Virtual reality interface devices such as the Nintendo® Wii and its peripheral nunchuks-balance board, head mounted displays and joystick allow interaction and immersion in unreal environments created from computer software. Virtual environments are highly interactive, generating great activation of visual, vestibular and proprioceptive systems during the execution of a video game. In addition, they are entertaining and safe for the user. Recently, incorporating therapeutic purposes in virtual reality interface devices has allowed them to be used for the rehabilitation of neurological patients, e.g., balance training in older adults and dynamic stability in healthy participants. The improvements observed in neurological diseases (chronic stroke and cerebral palsy) have been shown by changes in the reorganization of neural networks in patients’ brain, along with better hand function and other skills, contributing to their quality of life. The data generated by such studies could substantially contribute to physical rehabilitation strategies. PMID:25206907

  16. ATCA-based ATLAS FTK input interface system

    Energy Technology Data Exchange (ETDEWEB)

    Okumura, Yasuyuki [Chicago U., EFI; Liu, Tiehui Ted [Fermilab; Olsen, Jamieson [Fermilab; Iizawa, Tomoya [Waseda U.; Mitani, Takashi [Waseda U.; Korikawa, Tomohiro [Waseda U.; Yorita, Kohei [Waseda U.; Annovi, Alberto [Frascati; Beretta, Matteo [Frascati; Gatta, Maurizio [Frascati; Sotiropoulou, C-L. [Aristotle U., Thessaloniki; Gkaitatzis, Stamatios [Aristotle U., Thessaloniki; Kordas, Konstantinos [Aristotle U., Thessaloniki; Kimura, Naoki [Aristotle U., Thessaloniki; Cremonesi, Matteo [Chicago U., EFI; Yin, Hang [Fermilab; Xu, Zijun [Peking U.

    2015-04-27

    The first stage of the ATLAS Fast TracKer (FTK) is an ATCA-based input interface system, where hits from the entire silicon tracker are clustered and organized into overlapping eta-phi trigger towers before being sent to the tracking engines. First, FTK Input Mezzanine cards receive hit data and perform clustering to reduce data volume. Then, the ATCA-based Data Formatter system will organize the trigger tower data, sharing data among boards over full mesh backplanes and optic fibers. The board and system level design concepts and implementation details, as well as the operation experiences from the FTK full-chain testing, will be presented.

  17. SOME EXAMPLES OF APPLIED SYSTEMS WITH SPEECH INTERFACE

    Directory of Open Access Journals (Sweden)

    V. A. Zhitko

    2017-01-01

    Full Text Available Three examples of applied systems with a speech interface are considered in the article. The first two of these provide the end user with the opportunity to ask verbally the question and to hear the response from the system, creating an addition to the traditional I / O via the keyboard and computer screen. The third example, the «IntonTrainer» system, provides the user with the possibility of voice interaction and is designed for in-depth self-learning of the intonation of oral speech.

  18. Interface Management for a NASA Flight Project Using Model-Based Systems Engineering (MBSE)

    Science.gov (United States)

    Vipavetz, Kevin; Shull, Thomas A.; Infeld, Samatha; Price, Jim

    2016-01-01

    The goal of interface management is to identify, define, control, and verify interfaces; ensure compatibility; provide an efficient system development; be on time and within budget; while meeting stakeholder requirements. This paper will present a successful seven-step approach to interface management used in several NASA flight projects. The seven-step approach using Model Based Systems Engineering will be illustrated by interface examples from the Materials International Space Station Experiment-X (MISSE-X) project. The MISSE-X was being developed as an International Space Station (ISS) external platform for space environmental studies, designed to advance the technology readiness of materials and devices critical for future space exploration. Emphasis will be given to best practices covering key areas such as interface definition, writing good interface requirements, utilizing interface working groups, developing and controlling interface documents, handling interface agreements, the use of shadow documents, the importance of interface requirement ownership, interface verification, and product transition.

  19. Radiologist's clinical information review workstation interfaced with digital dictation system.

    Science.gov (United States)

    McEnery, K W; Suitor, C T; Hildebrand, S; Downs, R L

    2000-05-01

    Efficient access to information systems integrated into the radiologist's interpretation workflow will result in a more informed radiologist, with an enhanced capability to render an accurate interpretation. We describe our implementation of radStation, a radiologist's clinical information review workstation that combines a digital dictation station with a clinical information display. radStation uses client software distributed to the radiologist's workstation and central server software, both running Windows NT (Microsoft, Redmond, WA). The client system has integrated digital dictation software. The bar-code microphone (Boomerang, Dictaphone Corp, Stratford, CT) also serves as a computer input device forwarding the procedure's accession number to the server software. This initiates multiple queries to available legacy databases, including the radiology information system (RIS), laboratory information system, clinic notes, hospital discharge, and operative report system. The three-tier architecture then returns the clinical results to the radStation client for display. At the conclusion of the dictation, the digital voice file is transferred to the dictation server and the client notifies the RIS to update the examination status. The system is efficient in its information retrieval, with queries displayed in about 1 second. The radStation client requires less than 5 minutes of radiologist training in its operation, given that its control interface integrates with the well-learned dictation process. The telephone-based dictation system, which this new system replaced, remains available as a back-up system in the event of an unexpected digital dictation system failure. This system is well accepted and valued by the radiologists. The system interface is quickly mastered. The system does not interrupt dictation workflow with the display of all information initiated with examination bar-coding. This system's features could become an accepted model as a standard tool

  20. DESIGN OF A VISUAL INTERFACE FOR ANN BASED SYSTEMS

    Directory of Open Access Journals (Sweden)

    Ramazan BAYINDIR

    2008-01-01

    Full Text Available Artificial intelligence application methods have been used for control of many systems with parallel of technological development besides conventional control techniques. Increasing of artificial intelligence applications have required to education in this area. In this paper, computer based an artificial neural network (ANN software has been presented to learning and understanding of artificial neural networks. By means of the developed software, the training of the artificial neural network according to the inputs provided and a test action can be performed by changing the components such as iteration number, momentum factor, learning ratio, and efficiency function of the artificial neural networks. As a result of the study a visual education set has been obtained that can easily be adapted to the real time application.

  1. Electronic Interfacing Between a Living Cell and a Nanodevice: A Bio-Nano Hybrid System

    Energy Technology Data Exchange (ETDEWEB)

    Saraf, Ravi F. [Univ. of Nebraska, Lincoln, NE (United States). Dept. of Chemical and Biomolecular Engineering

    2013-12-31

    The primary goal of this program was to couple physical electronics with live cells to leverage the highly sophisticated functions of a biological system to ultimately create advanced functionality. The study was built on a unique self-assembled architecture of nanoparticles that exhibits transport properties that are sensitive to single-electron charge modulation. At room temperature, the energy of switching due to single-electron charge modulation was in the range of 4 to 100 kT. The structure invented in the principal investigator’s lab is a two-dimensional (2D) network of one-dimensional (1D) necklaces of 10 nm Au nanoparticles. The electron transport through the necklace network is regulated by quantum mechanical single-electron traps. As a result of the single electron traps, the all metal nanoparticle network array displays a conduction band gap. Fundamental studies on the transport properties of the network in air and water were studied to regulate the band gap by tailoring the network structure to demonstrate the first electrochemical single electron transistor operating in water. Cells were interfaced with the network to observe electrochemical activity in a cell during photosynthesis and single viral infection.

  2. General-purpose interface bus for multiuser, multitasking computer system

    Science.gov (United States)

    Generazio, Edward R.; Roth, Don J.; Stang, David B.

    1990-01-01

    The architecture of a multiuser, multitasking, virtual-memory computer system intended for the use by a medium-size research group is described. There are three central processing units (CPU) in the configuration, each with 16 MB memory, and two 474 MB hard disks attached. CPU 1 is designed for data analysis and contains an array processor for fast-Fourier transformations. In addition, CPU 1 shares display images viewed with the image processor. CPU 2 is designed for image analysis and display. CPU 3 is designed for data acquisition and contains 8 GPIB channels and an analog-to-digital conversion input/output interface with 16 channels. Up to 9 users can access the third CPU simultaneously for data acquisition. Focus is placed on the optimization of hardware interfaces and software, facilitating instrument control, data acquisition, and processing.

  3. Endogenous network of firms and systemic risk

    Science.gov (United States)

    Ma, Qianting; He, Jianmin; Li, Shouwei

    2018-02-01

    We construct an endogenous network characterized by commercial credit relationships connecting the upstream and downstream firms. Simulation results indicate that the endogenous network model displays a scale-free property which exists in real-world firm systems. In terms of the network structure, with the expansion of the scale of network nodes, the systemic risk increases significantly, while the heterogeneities of network nodes have no effect on systemic risk. As for firm micro-behaviors, including the selection range of trading partners, actual output, labor requirement, price of intermediate products and employee salaries, increase of all these parameters will lead to higher systemic risk.

  4. Large scale network-centric distributed systems

    CERN Document Server

    Sarbazi-Azad, Hamid

    2014-01-01

    A highly accessible reference offering a broad range of topics and insights on large scale network-centric distributed systems Evolving from the fields of high-performance computing and networking, large scale network-centric distributed systems continues to grow as one of the most important topics in computing and communication and many interdisciplinary areas. Dealing with both wired and wireless networks, this book focuses on the design and performance issues of such systems. Large Scale Network-Centric Distributed Systems provides in-depth coverage ranging from ground-level hardware issu

  5. A graphical user interface for a method to infer kinetics and network architecture (MIKANA.

    Directory of Open Access Journals (Sweden)

    Márcio A Mourão

    Full Text Available One of the main challenges in the biomedical sciences is the determination of reaction mechanisms that constitute a biochemical pathway. During the last decades, advances have been made in building complex diagrams showing the static interactions of proteins. The challenge for systems biologists is to build realistic models of the dynamical behavior of reactants, intermediates and products. For this purpose, several methods have been recently proposed to deduce the reaction mechanisms or to estimate the kinetic parameters of the elementary reactions that constitute the pathway. One such method is MIKANA: Method to Infer Kinetics And Network Architecture. MIKANA is a computational method to infer both reaction mechanisms and estimate the kinetic parameters of biochemical pathways from time course data. To make it available to the scientific community, we developed a Graphical User Interface (GUI for MIKANA. Among other features, the GUI validates and processes an input time course data, displays the inferred reactions, generates the differential equations for the chemical species in the pathway and plots the prediction curves on top of the input time course data. We also added a new feature to MIKANA that allows the user to exclude a priori known reactions from the inferred mechanism. This addition improves the performance of the method. In this article, we illustrate the GUI for MIKANA with three examples: an irreversible Michaelis-Menten reaction mechanism; the interaction map of chemical species of the muscle glycolytic pathway; and the glycolytic pathway of Lactococcus lactis. We also describe the code and methods in sufficient detail to allow researchers to further develop the code or reproduce the experiments described. The code for MIKANA is open source, free for academic and non-academic use and is available for download (Information S1.

  6. Power System Stabilizer Design Based on a Particle Swarm Optimization Multiobjective Function Implemented Under Graphical Interface

    Directory of Open Access Journals (Sweden)

    Ghouraf Djamel Eddine

    2016-05-01

    Full Text Available Power system stability considered a necessary condition for normal functioning of an electrical network. The role of regulation and control systems is to ensure that stability by determining the essential elements that influence it. This paper proposes a Particle Swarm Optimization (PSO based multiobjective function to tuning optimal parameters of Power System Stabilizer (PSS; this later is used as auxiliary to generator excitation system in order to damp electro mechanicals oscillations of the rotor and consequently improve Power system stability. The computer simulation results obtained by developed graphical user interface (GUI have proved the efficiency of PSS optimized by a Particle Swarm Optimization, in comparison with a conventional PSS, showing stable   system   responses   almost   insensitive   to   large parameter variations.Our present study was performed using a GUI realized under MATLAB in our work.

  7. Brain-computer interface after nervous system injury.

    Science.gov (United States)

    Burns, Alexis; Adeli, Hojjat; Buford, John A

    2014-12-01

    Brain-computer interface (BCI) has proven to be a useful tool for providing alternative communication and mobility to patients suffering from nervous system injury. BCI has been and will continue to be implemented into rehabilitation practices for more interactive and speedy neurological recovery. The most exciting BCI technology is evolving to provide therapeutic benefits by inducing cortical reorganization via neuronal plasticity. This article presents a state-of-the-art review of BCI technology used after nervous system injuries, specifically: amyotrophic lateral sclerosis, Parkinson's disease, spinal cord injury, stroke, and disorders of consciousness. Also presented is transcending, innovative research involving new treatment of neurological disorders. © The Author(s) 2014.

  8. Brain-computer interface systems: progress and prospects.

    Science.gov (United States)

    Allison, Brendan Z; Wolpaw, Elizabeth Winter; Wolpaw, Jonathan R

    2007-07-01

    Brain-computer interface (BCI) systems support communication through direct measures of neural activity without muscle activity. BCIs may provide the best and sometimes the only communication option for users disabled by the most severe neuromuscular disorders and may eventually become useful to less severely disabled and/or healthy individuals across a wide range of applications. This review discusses the structure and functions of BCI systems, clarifies terminology and addresses practical applications. Progress and opportunities in the field are also identified and explicated.

  9. Acquisition System and Detector Interface for Power Pulsed Detectors

    CERN Document Server

    Cornat, R

    2012-01-01

    A common DAQ system is being developed within the CALICE collaboration. It provides a flexible and scalable architecture based on giga-ethernet and 8b/10b serial links in order to transmit either slow control data, fast signals or read out data. A detector interface (DIF) is used to connect detectors to the DAQ system based on a single firmware shared among the collaboration but targeted on various physical implementations. The DIF allows to build, store and queue packets of data as well as to control the detectors providing USB and serial link connectivity. The overall architecture is foreseen to manage several hundreds of thousands channels.

  10. Impact of mental representational systems on design interface.

    Energy Technology Data Exchange (ETDEWEB)

    Brown-VanHoozer, S. A.

    1998-02-25

    The purpose of the studies conducted at Argonne National Laboratory is to understand the impact mental representational systems have in identifying how user comfort parameters influence how information is to best be presented. By understanding how each individual perceives information based on the three representational systems (visual, auditory and kinesthetic modalities), it has been found that a different approach must be taken in the design of interfaces resulting in an outcome that is much more effective and representative of the users mental model. This paper will present current findings and future theories to be explored.

  11. Network-based reading system for lung cancer screening CT

    Science.gov (United States)

    Fujino, Yuichi; Fujimura, Kaori; Nomura, Shin-ichiro; Kawashima, Harumi; Tsuchikawa, Megumu; Matsumoto, Toru; Nagao, Kei-ichi; Uruma, Takahiro; Yamamoto, Shinji; Takizawa, Hotaka; Kuroda, Chikazumi; Nakayama, Tomio

    2006-03-01

    This research aims to support chest computed tomography (CT) medical checkups to decrease the death rate by lung cancer. We have developed a remote cooperative reading system for lung cancer screening over the Internet, a secure transmission function, and a cooperative reading environment. It is called the Network-based Reading System. A telemedicine system involves many issues, such as network costs and data security if we use it over the Internet, which is an open network. In Japan, broadband access is widespread and its cost is the lowest in the world. We developed our system considering human machine interface and security. It consists of data entry terminals, a database server, a computer aided diagnosis (CAD) system, and some reading terminals. It uses a secure Digital Imaging and Communication in Medicine (DICOM) encrypting method and Public Key Infrastructure (PKI) based secure DICOM image data distribution. We carried out an experimental trial over the Japan Gigabit Network (JGN), which is the testbed for the Japanese next-generation network, and conducted verification experiments of secure screening image distribution, some kinds of data addition, and remote cooperative reading. We found that network bandwidth of about 1.5 Mbps enabled distribution of screening images and cooperative reading and that the encryption and image distribution methods we proposed were applicable to the encryption and distribution of general DICOM images via the Internet.

  12. Active system area networks for data intensive computations. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-04-01

    The goal of the Active System Area Networks (ASAN) project is to develop hardware and software technologies for the implementation of active system area networks (ASANs). The use of the term ''active'' refers to the ability of the network interfaces to perform application-specific as well as system level computations in addition to their traditional role of data transfer. This project adopts the view that the network infrastructure should be an active computational entity capable of supporting certain classes of computations that would otherwise be performed on the host CPUs. The result is a unique network-wide programming model where computations are dynamically placed within the host CPUs or the NIs depending upon the quality of service demands and network/CPU resource availability. The projects seeks to demonstrate that such an approach is a better match for data intensive network-based applications and that the advent of low-cost powerful embedded processors and configurable hardware makes such an approach economically viable and desirable.

  13. Functional network reorganization during learning in a brain-computer interface paradigm.

    Science.gov (United States)

    Jarosiewicz, Beata; Chase, Steven M; Fraser, George W; Velliste, Meel; Kass, Robert E; Schwartz, Andrew B

    2008-12-09

    Efforts to study the neural correlates of learning are hampered by the size of the network in which learning occurs. To understand the importance of learning-related changes in a network of neurons, it is necessary to understand how the network acts as a whole to generate behavior. Here we introduce a paradigm in which the output of a cortical network can be perturbed directly and the neural basis of the compensatory changes studied in detail. Using a brain-computer interface, dozens of simultaneously recorded neurons in the motor cortex of awake, behaving monkeys are used to control the movement of a cursor in a three-dimensional virtual-reality environment. This device creates a precise, well-defined mapping between the firing of the recorded neurons and an expressed behavior (cursor movement). In a series of experiments, we force the animal to relearn the association between neural firing and cursor movement in a subset of neurons and assess how the network changes to compensate. We find that changes in neural activity reflect not only an alteration of behavioral strategy but also the relative contributions of individual neurons to the population error signal.

  14. ENERGY AWARE NETWORK: BAYESIAN BELIEF NETWORKS BASED DECISION MANAGEMENT SYSTEM

    Directory of Open Access Journals (Sweden)

    Santosh Kumar Chaudhari

    2011-06-01

    Full Text Available A Network Management System (NMS plays a very important role in managing an ever-evolving telecommunication network. Generally an NMS monitors & maintains the health of network elements. The growing size of the network warrants extra functionalities from the NMS. An NMS provides all kinds of information about networks which can be used for other purposes apart from monitoring & maintaining networks like improving QoS & saving energy in the network. In this paper, we add another dimension to NMS services, namely, making an NMS energy aware. We propose a Decision Management System (DMS framework which uses a machine learning technique called Bayesian Belief Networks (BBN, to make the NMS energy aware. The DMS is capable of analysing and making control decisions based on network traffic. We factor in the cost of rerouting and power saving per port. Simulations are performed on standard network topologies, namely, ARPANet and IndiaNet. It is found that ~2.5-6.5% power can be saved.

  15. Dislocation network with pair-coupling structure in {111} γ/γ' interface of Ni-based single crystal superalloy.

    Science.gov (United States)

    Ru, Yi; Li, Shusuo; Zhou, Jian; Pei, Yanling; Wang, Hui; Gong, Shengkai; Xu, Huibin

    2016-08-11

    The γ/γ' interface dislocation network is reported to improve the high temperature creep resistance of single crystal superalloys and is usually found to deposit in {001} interface. In this work, a new type of dislocation network was found in {111} γ/γ' interface at a single crystal model superalloy crept at 1100 °C/100 MPa. The dislocations in the network are screw with Burgers vectors of 1/2 a and most interestingly, they exhibit a pair-coupling structure. Further investigation indicates that the formation of {111} interface dislocation network occurs when the γ' raft structure begins to degrade by the dislocations cutting into the rafted γ' through the interface. In this condition, the pair-coupling structure is established by the dislocations gliding in a single {111} plane of γ', in order to remove the anti-phase boundary in γ'; these dislocations also act as diffusion channels for dissolving of the γ' particle that is unstable under the interfacial stress from lattice misfit, which leads to the formation of {111}-type zigzag interface. The formation of this network arises as a consequence of more negative misfit, low-alloying γ' particle and proper test conditions of temperature and stress.

  16. System and Network Security Acronyms and Abbreviations

    Science.gov (United States)

    2009-09-01

    Systems Agency DLL dynamic link library DMA direct memory access DMZ demilitarized zone DN distinguished name DN domain name DNP Distributed...NetBIOS Network Basic Input/Output System NetBT NetBIOS over TCP/IP NFAT network forensic analysis tool NFC near field communication NFS network file...Software Reference Library NSS Network Security Services NSTB National SCADA Test Bed NSTISSC National Security Telecommunications and Information

  17. Quartz Crystal Microbalance Electronic Interfacing Systems: A Review

    Directory of Open Access Journals (Sweden)

    Abdulrahman Alassi

    2017-12-01

    Full Text Available Quartz Crystal Microbalance (QCM sensors are actively being implemented in various fields due to their compatibility with different operating conditions in gaseous/liquid mediums for a wide range of measurements. This trend has been matched by the parallel advancement in tailored electronic interfacing systems for QCM sensors. That is, selecting the appropriate electronic circuit is vital for accurate sensor measurements. Many techniques were developed over time to cover the expanding measurement requirements (e.g., accommodating highly-damping environments. This paper presents a comprehensive review of the various existing QCM electronic interfacing systems. Namely, impedance-based analysis, oscillators (conventional and lock-in based techniques, exponential decay methods and the emerging phase-mass based characterization. The aforementioned methods are discussed in detail and qualitatively compared in terms of their performance for various applications. In addition, some theoretical improvements and recommendations are introduced for adequate systems implementation. Finally, specific design considerations of high-temperature microbalance systems (e.g., GaPO4 crystals (GCM and Langasite crystals (LCM are introduced, while assessing their overall system performance, stability and quality compared to conventional low-temperature applications.

  18. Development of wrist rehabilitation robot and interface system.

    Science.gov (United States)

    Yamamoto, Ikuo; Matsui, Miki; Inagawa, Naohiro; Hachisuka, Kenji; Wada, Futoshi; Hachisuka, Akiko; Saeki, Satoru

    2015-01-01

    The authors have developed a practical wrist rehabilitation robot for hemiplegic patients. It consists of a mechanical rotation unit, sensor, grip, and computer system. A myoelectric sensor is used to monitor the extensor carpi radialis longus/brevis muscle and flexor carpi radialis muscle activity during training. The training robot can provoke training through myoelectric sensors, a biological signal detector and processor in advance, so that patients can undergo effective training of extention and flexion in an excited condition. In addition, both-wrist system has been developed for mirror effect training, which is the most effective function of the system, so that autonomous training using both wrists is possible. Furthermore, a user-friendly screen interface with easily recognizable touch panels has been developed to give effective training for patients. The developed robot is small size and easy to carry. The developed aspiring interface system is effective to motivate the training of patients. The effectiveness of the robot system has been verified in hospital trails.

  19. Semi-pervasive interface on a virtual reality based training system for live line maintenance activities on energy distribution networks; Interface semi-pervasiva em um sistema de treinamento baseado em realidade virtual para atividades de manutencao em linha viva em redes de distribuicao de energia

    Energy Technology Data Exchange (ETDEWEB)

    Geus, Klaus de; Otto Filho, Eduardo; Goulart, Jomar Centeno [Companhia Paranaense de Energia (COPEL), Curitiba, PR (Brazil)], Emails: klaus@copel.com, eduardo.otto@copel.com, jomarcg@copel.com; Scheer, Sergio; Buriol, Tiago Martinuzzi; Rosendo, Matheus [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil)], Emails: scheer@ufpr.br, tiagoburiol@gmail.com, matheusrosendo@gmail.com; Felsky Filho, Carlos Eduardo [Instituto de Tecnologia para o Desenvolvimento (LACTEC), Curitiba, PR (Brazil)], Email: felsky@latec.org.br

    2010-04-15

    Techniques for live-line maintenance are those performed on power distribution networks without interrupting the flow of energy. This practice net avoids costs, but it is considered high-risk. Thus the effectiveness of previous training is very important and, therefore, constant efforts are made to find resources in order to improve the knowledge retention and quality of information provided. This paper discusses the development of a semi-immersive VR system for training of live-line maintenance activities. Aspects of the development software, its characteristics and functional model, in addition to the interactive devices are presented and the choices justified. The goal is to describe an unprecedented platform which uses devices the Nintendo Wii to provide a novel model of interaction and navigation in professional activities. This model is focused on some principles of ubiquitous computing and tangible interaction. (author)

  20. Molecular tailoring of interfaces for thin film on substrate systems

    Science.gov (United States)

    Grady, Martha Elizabeth

    Thin film on substrate systems appear most prevalently within the microelectronics industry, which demands that devices operate in smaller and smaller packages with greater reliability. The reliability of these multilayer film systems is strongly influenced by the adhesion of each of the bimaterial interfaces. During use, microelectronic components undergo thermo-mechanical cycling, which induces interfacial delaminations leading to failure of the overall device. The ability to tailor interfacial properties at the molecular level provides a mechanism to improve thin film adhesion, reliability and performance. This dissertation presents the investigation of molecular level control of interface properties in three thin film-substrate systems: photodefinable polyimide films on passivated silicon substrates, self-assembled monolayers at the interface of Au films and dielectric substrates, and mechanochemically active materials on rigid substrates. For all three materials systems, the effect of interfacial modifications on adhesion is assessed using a laser-spallation technique. Laser-induced stress waves are chosen because they dynamically load the thin film interface in a precise, noncontacting manner at high strain rates and are suitable for both weak and strong interfaces. Photodefinable polyimide films are used as dielectrics in flip chip integrated circuit packages to reduce the stress between silicon passivation layers and mold compound. The influence of processing parameters on adhesion is examined for photodefinable polyimide films on silicon (Si) substrates with three different passivation layers: silicon nitride (SiNx), silicon oxynitride (SiOxNy), and the native silicon oxide (SiO2). Interfacial strength increases when films are processed with an exposure step as well as a longer cure cycle. Additionally, the interfacial fracture energy is assessed using a dynamic delamination protocol. The high toughness of this interface (ca. 100 J/m2) makes it difficult

  1. Filtering and control of wireless networked systems

    CERN Document Server

    Zhang, Dan; Yu, Li

    2017-01-01

    This self-contained book, written by leading experts, offers a cutting-edge, in-depth overview of the filtering and control of wireless networked systems. It addresses the energy constraint and filter/controller gain variation problems, and presents both the centralized and the distributed solutions. The first two chapters provide an introduction to networked control systems and basic information on system analysis. Chapters (3–6) then discuss the centralized filtering of wireless networked systems, presenting different approaches to deal with energy efficiency and filter/controller gain variation problems. The next part (chapters 7–10) explores the distributed filtering of wireless networked systems, addressing the main problems of energy constraint and filter gain variation. The final part (chapters 11–14) focuses on the distributed control of wireless networked systems. networked systems for communication and control applications, the bo...

  2. Design of video interface conversion system based on FPGA

    Science.gov (United States)

    Zhao, Heng; Wang, Xiang-jun

    2014-11-01

    This paper presents a FPGA based video interface conversion system that enables the inter-conversion between digital and analog video. Cyclone IV series EP4CE22F17C chip from Altera Corporation is used as the main video processing chip, and single-chip is used as the information interaction control unit between FPGA and PC. The system is able to encode/decode messages from the PC. Technologies including video decoding/encoding circuits, bus communication protocol, data stream de-interleaving and de-interlacing, color space conversion and the Camera Link timing generator module of FPGA are introduced. The system converts Composite Video Broadcast Signal (CVBS) from the CCD camera into Low Voltage Differential Signaling (LVDS), which will be collected by the video processing unit with Camera Link interface. The processed video signals will then be inputted to system output board and displayed on the monitor.The current experiment shows that it can achieve high-quality video conversion with minimum board size.

  3. Design of real-time voice over internet protocol system under bandwidth network

    Science.gov (United States)

    Zhang, Li; Gong, Lina

    2017-04-01

    With the increasing bandwidth of the network and network convergence accelerating, VoIP means of communication across the network is becoming increasingly popular phenomenon. The real-time identification and analysis for VOIP flow over backbone network become the urgent needs and research hotspot of network operations management. Based on this, the paper proposes a VoIP business management system over backbone network. The system first filters VoIP data stream over backbone network and further resolves the call signaling information and media voice. The system can also be able to design appropriate rules to complete real-time reduction and presentation of specific categories of calls. Experimental results show that the system can parse and process real-time backbone of the VoIP call, and the results are presented accurately in the management interface, VoIP-based network traffic management and maintenance provide the necessary technical support.

  4. Convolutional neural networks for P300 detection with application to brain-computer interfaces.

    Science.gov (United States)

    Cecotti, Hubert; Gräser, Axel

    2011-03-01

    A Brain-Computer Interface (BCI) is a specific type of human-computer interface that enables the direct communication between human and computers by analyzing brain measurements. Oddball paradigms are used in BCI to generate event-related potentials (ERPs), like the P300 wave, on targets selected by the user. A P300 speller is based on this principle, where the detection of P300 waves allows the user to write characters. The P300 speller is composed of two classification problems. The first classification is to detect the presence of a P300 in the electroencephalogram (EEG). The second one corresponds to the combination of different P300 responses for determining the right character to spell. A new method for the detection of P300 waves is presented. This model is based on a convolutional neural network (CNN). The topology of the network is adapted to the detection of P300 waves in the time domain. Seven classifiers based on the CNN are proposed: four single classifiers with different features set and three multiclassifiers. These models are tested and compared on the Data set II of the third BCI competition. The best result is obtained with a multiclassifier solution with a recognition rate of 95.5 percent, without channel selection before the classification. The proposed approach provides also a new way for analyzing brain activities due to the receptive field of the CNN models.

  5. Operating systems and network protocols for wireless sensor networks.

    Science.gov (United States)

    Dutta, Prabal; Dunkels, Adam

    2012-01-13

    Sensor network protocols exist to satisfy the communication needs of diverse applications, including data collection, event detection, target tracking and control. Network protocols to enable these services are constrained by the extreme resource scarcity of sensor nodes-including energy, computing, communications and storage-which must be carefully managed and multiplexed by the operating system. These challenges have led to new protocols and operating systems that are efficient in their energy consumption, careful in their computational needs and miserly in their memory footprints, all while discovering neighbours, forming networks, delivering data and correcting failures.

  6. Network Intrusion Detection System using Apache Storm

    Directory of Open Access Journals (Sweden)

    Muhammad Asif Manzoor

    2017-06-01

    Full Text Available Network security implements various strategies for the identification and prevention of security breaches. Network intrusion detection is a critical component of network management for security, quality of service and other purposes. These systems allow early detection of network intrusion and malicious activities; so that the Network Security infrastructure can react to mitigate these threats. Various systems are proposed to enhance the network security. We are proposing to use anomaly based network intrusion detection system in this work. Anomaly based intrusion detection system can identify the new network threats. We also propose to use Real-time Big Data Stream Processing Framework, Apache Storm, for the implementation of network intrusion detection system. Apache Storm can help to manage the network traffic which is generated at enormous speed and size and the network traffic speed and size is constantly increasing. We have used Support Vector Machine in this work. We use Knowledge Discovery and Data Mining 1999 (KDD’99 dataset to test and evaluate our proposed solution.

  7. Small-Signal Stability of Wind Power System With Full-Load Converter Interfaced Wind Turbines

    DEFF Research Database (Denmark)

    Knüppel, Thyge; Nielsen, Jørgen Nygaard; Jensen, Kim Høj

    2012-01-01

    . The WT is, furthermore, equipped with a park level WPP voltage controller and comparisons are presented. The WT model for this work is a validated dynamic model of the 3.6 MW Siemens Wind Power WT. The study is based on modal analysis which is complemented with time domain simulations on the nonlinear......Small-signal stability analysis of power system oscillations is a well established field within power system analysis, but not much attention has yet been paid to systems with a high penetration of wind turbines and with large wind power plants (WPP). In this paper a comprehensive analysis...... is presented which assesses the impact of full-load converter interfaced wind turbines on power system small-signal stability. The study is based on a 7 generator network with lightly damped inter-area modes. A detailed wind turbine (WT) model with all grid relevant control functions is used in the study...

  8. Model-based control of networked systems

    CERN Document Server

    Garcia, Eloy; Montestruque, Luis A

    2014-01-01

    This monograph introduces a class of networked control systems (NCS) called model-based networked control systems (MB-NCS) and presents various architectures and control strategies designed to improve the performance of NCS. The overall performance of NCS considers the appropriate use of network resources, particularly network bandwidth, in conjunction with the desired response of the system being controlled.   The book begins with a detailed description of the basic MB-NCS architecture that provides stability conditions in terms of state feedback updates . It also covers typical problems in NCS such as network delays, network scheduling, and data quantization, as well as more general control problems such as output feedback control, nonlinear systems stabilization, and tracking control.   Key features and topics include: Time-triggered and event-triggered feedback updates Stabilization of uncertain systems subject to time delays, quantization, and extended absence of feedback Optimal control analysis and ...

  9. 47 CFR 15.115 - TV interface devices, including cable system terminal devices.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false TV interface devices, including cable system... FREQUENCY DEVICES Unintentional Radiators § 15.115 TV interface devices, including cable system terminal devices. (a) Measurements of the radiated emissions of a TV interface device shall be conducted with the...

  10. Astro-WISE interfaces : Scientific information system brought to the user

    NARCIS (Netherlands)

    Belikov, Andrey N.; Vriend, Willem-Jan; Sikkema, Gert

    From a simple text interface to a graphical user interfaces-Astro-WISE provides the user with a wide range of possibilities to interact with the information system according to the user's tasks and use cases. We describe a general approach to the interfacing of a scientific information system. We

  11. Design and Evaluation of Human System Interfaces (HSIs)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    In the safe operation of nuclear power plants and other complex process industries the performance of the control room crews plays an important role. In this respect a well-functioning and well-designed Human-System Interface (HSI) is crucial for safe and efficient operation of the plant. It is therefore essential that the design, development and evaluation of both control rooms and HSI-solutions are conducted in a well-structured way, applying sound human factors principles and guidelines in all phases of the HSI development process. Many nuclear power plants around the world are currently facing major modernisation of their control rooms. In this process computerised, screen-based HSIs replace old conventional operator interfaces. In new control rooms, both in the nuclear field and in other process industries, fully digital, screen-based control rooms are becoming the standard. It is therefore of particular importance to address the design and evaluation of screen-based HSIs in a systematic and consistent way in order to arrive at solutions which take proper advantage of the possibilities for improving operator support through the use of digital, screen-based HSIs, at the same time avoiding pitfalls and problems in the use of this technology. The Halden Reactor Project, in cooperation with the OECD Nuclear Energy Agency, organised an International Summer School on ''Design and Evaluation of Human-System Interfaces (HSIs)'' in Halden, Norway in the period August 25th - 29th, 2003. The Summer School addressed the different steps in design, development and evaluation of HSIs, and the human factors principles, standards and guidelines which should be followed in this process. The lectures comprised both theoretical background, as well as examples of good and bad HSI design, thereby providing practical advice in design and evaluation of operator interfaces and control room solutions to the participants in the Summer School. This CD contains the

  12. Actor Network Theory Approach and its Application in Investigating Agricultural Climate Information System

    Directory of Open Access Journals (Sweden)

    Maryam Sharifzadeh

    2013-03-01

    Full Text Available Actor network theory as a qualitative approach to study complex social factors and process of socio-technical interaction provides new concepts and ideas to understand socio-technical nature of information systems. From the actor network theory viewpoint, agricultural climate information system is a network consisting of actors, actions and information related processes (production, transformation, storage, retrieval, integration, diffusion and utilization, control and management, and system mechanisms (interfaces and networks. Analysis of such systemsembody the identification of basic components and structure of the system (nodes –thedifferent sources of information production, extension, and users, and the understanding of how successfully the system works (interaction and links – in order to promote climate knowledge content and improve system performance to reach agricultural development. The present research attempted to introduce actor network theory as research framework based on network view of agricultural climate information system.

  13. BISON: bio-interface for the semi-global analysis of network patterns

    Directory of Open Access Journals (Sweden)

    Besemann Christopher

    2006-11-01

    Full Text Available Abstract Background The large amount of genomics data that have accumulated over the past decade require extensive data mining. However, the global nature of data mining, which includes pattern mining, poses difficulties for users who want to study specific questions in a more local environment. This creates a need for techniques that allow a localized analysis of globally determined patterns. Results We developed a tool that determines and evaluates global patterns based on protein property and network information, while providing all the benefits of a perspective that is targeted at biologist users with specific goals and interests. Our tool uses our own data mining techniques, integrated into current visualization and navigation techniques. The functionality of the tool is discussed in the context of the transcriptional network of regulation in the enteric bacterium Escherichia coli. Two biological questions were asked: (i Which functional categories of proteins (identified by hidden Markov models are regulated by a regulator with a specific domain? (ii Which regulators are involved in the regulation of proteins that contain a common hidden Markov model? Using these examples, we explain the gene-centered and pattern-centered analysis that the tool permits. Conclusion In summary, we have a tool that can be used for a wide variety of applications in biology, medicine, or agriculture. The pattern mining engine is global in the way that patterns are determined across the entire network. The tool still permits a localized analysis for users who want to analyze a subportion of the total network. We have named the tool BISON (Bio-Interface for the Semi-global analysis Of Network patterns.

  14. FY07 Summary of System Interface and Support Systems R&D and Technical Issues Map

    Energy Technology Data Exchange (ETDEWEB)

    Steven R. Sherman

    2007-09-01

    This document provides a summary of research and development activities in the System Interface and Support Systems area of the DOE Nuclear Hydrogen Initiative in FY 2007. Project cost and performance data obtained from the PICS system, at least up through July 2007, are presented and analyzed. Brief summaries of accomplishments and references are provided. A mapping of System Interface and Support Systems technical issues versus the work performed is updated and presented. Lastly, near-term research plans are described, and recommendatioins are provided for additional research.

  15. Control theory of digitally networked dynamic systems

    CERN Document Server

    Lunze, Jan

    2013-01-01

    The book gives an introduction to networked control systems and describes new modeling paradigms, analysis methods for event-driven, digitally networked systems, and design methods for distributed estimation and control. Networked model predictive control is developed as a means to tolerate time delays and packet loss brought about by the communication network. In event-based control the traditional periodic sampling is replaced by state-dependent triggering schemes. Novel methods for multi-agent systems ensure complete or clustered synchrony of agents with identical or with individual dynamic

  16. Integrated System for Performance Monitoring of the ATLAS TDAQ Network

    CERN Document Server

    Savu, DO; The ATLAS collaboration; Martin, B; Sjoen, R; Batraneanu, SM; Stancu, S

    2011-01-01

    The ATLAS TDAQ Network consists of three separate networks spanning four levels of the experimental building. Over 200 edge switches and 5 multi-blade chassis routers are used to interconnect 2000 processors, adding up to more than 7000 high speed interfaces. In order to substantially speed-up ad-hoc and post mortem analysis, a scalable, yet flexible, integrated system for monitoring both network statistics and environmental conditions, processor parameters and data taking characteristics was required. For successful up-to-the-minute monitoring, information from many SNMP compliant devices, independent databases and custom APIs was gathered, stored and displayed in an optimal way. Easy navigation and compact aggregation of multiple data sources were the main requirements; characteristics not found in any of the tested products, either open-source or commercial. This paper describes how performance, scalability and display issues were addressed and what challenges the project faced during development and deplo...

  17. Integrated System for Performance Monitoring of ATLAS TDAQ Network

    CERN Document Server

    Savu, D; The ATLAS collaboration; Martin, B; Sjoen, R; Batraneanu, S; Stancu, S

    2010-01-01

    The ATLAS TDAQ Network consists of three separate networks spanning four levels of the experimental building. Over 200 edge switches and 5 multi-blade chassis routers are used to interconnect 2000 processors, adding up to more than 7000 high speed interfaces. In order to substantially speed-up ad-hoc and post mortem analysis, a scalable, yet flexible, integrated system for monitoring both network statistics and environmental conditions, processor parameters and data taking characteristics was required. For successful up-to-the-minute monitoring, information from many SNMP compliant devices, independent databases and custom APIs was gathered, stored and displayed in an optimal way. Easy navigation and compact aggregation of multiple data sources were the main requirements; characteristics not found in any of the tested products, either open-source or commercial. This paper describes how performance, scalability and display issues were addressed and what challenges the project faced during development and deplo...

  18. ROS-IGTL-Bridge: an open network interface for image-guided therapy using the ROS environment.

    Science.gov (United States)

    Frank, Tobias; Krieger, Axel; Leonard, Simon; Patel, Niravkumar A; Tokuda, Junichi

    2017-08-01

    With the growing interest in advanced image-guidance for surgical robot systems, rapid integration and testing of robotic devices and medical image computing software are becoming essential in the research and development. Maximizing the use of existing engineering resources built on widely accepted platforms in different fields, such as robot operating system (ROS) in robotics and 3D Slicer in medical image computing could simplify these tasks. We propose a new open network bridge interface integrated in ROS to ensure seamless cross-platform data sharing. A ROS node named ROS-IGTL-Bridge was implemented. It establishes a TCP/IP network connection between the ROS environment and external medical image computing software using the OpenIGTLink protocol. The node exports ROS messages to the external software over the network and vice versa simultaneously, allowing seamless and transparent data sharing between the ROS-based devices and the medical image computing platforms. Performance tests demonstrated that the bridge could stream transforms, strings, points, and images at 30 fps in both directions successfully. The data transfer latency was bridge could achieve 900 fps for transforms. Additionally, the bridge was demonstrated in two representative systems: a mock image-guided surgical robot setup consisting of 3D slicer, and Lego Mindstorms with ROS as a prototyping and educational platform for IGT research; and the smart tissue autonomous robot surgical setup with 3D Slicer. The study demonstrated that the bridge enabled cross-platform data sharing between ROS and medical image computing software. This will allow rapid and seamless integration of advanced image-based planning/navigation offered by the medical image computing software such as 3D Slicer into ROS-based surgical robot systems.

  19. Network management systems for active distribution networks. A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, D.A.

    2004-07-01

    A technical feasibility study on network management systems for active distribution networks is reported. The study investigated the potential for modifying a Distribution Network Operator (DNO) Supervisory Control and Data Acquisition System (SCADA) to give some degree of active management. Government incentives have encouraged more and more embedded generation being connected to the UK distribution networks and further acceleration of the process should support the 2010 target for a reduction in emissions of carbon dioxide. The report lists the objectives of the study and summarises what has been achieved; it also discusses limitations, reliability and resilience of existing SCADA. Safety and operational communications are discussed under staff safety and operational safety. Recommendations that could facilitate active management through SCADA are listed, together with suggestions for further study. The work was carried out as part of the DTI New and Renewable Energy Programme managed by Future Energy Solutions.

  20. Evaluation of a Compact Hybrid Brain-Computer Interface System

    Directory of Open Access Journals (Sweden)

    Jaeyoung Shin

    2017-01-01

    Full Text Available We realized a compact hybrid brain-computer interface (BCI system by integrating a portable near-infrared spectroscopy (NIRS device with an economical electroencephalography (EEG system. The NIRS array was located on the subjects’ forehead, covering the prefrontal area. The EEG electrodes were distributed over the frontal, motor/temporal, and parietal areas. The experimental paradigm involved a Stroop word-picture matching test in combination with mental arithmetic (MA and baseline (BL tasks, in which the subjects were asked to perform either MA or BL in response to congruent or incongruent conditions, respectively. We compared the classification accuracies of each of the modalities (NIRS or EEG with that of the hybrid system. We showed that the hybrid system outperforms the unimodal EEG and NIRS systems by 6.2% and 2.5%, respectively. Since the proposed hybrid system is based on portable platforms, it is not confined to a laboratory environment and has the potential to be used in real-life situations, such as in neurorehabilitation.

  1. Network systems and groupware for public facilities; Network system to groupware

    Energy Technology Data Exchange (ETDEWEB)

    Torimaru, K.; Kubo, S. [Fuji Electric Co. Ltd., Tokyo (Japan); Takeda, K. [Osaki Computer Engineering Co. Ltd., Tokyo (Japan)

    1999-12-10

    This paper outlines solutions for network systems and groupware for the infrastructure of information systems in public facilities. With regard to network systems, Fuji Electric's network solutions including requirements of public facilities and application examples are described. With regard to groupware, the status of groupware used for raising efficiency in public facilities and groupware packages marketed by Fuji Electric. (author)

  2. Spinal Cord Injury Model System Information Network

    Science.gov (United States)

    ... the UAB-SCIMS Contact the UAB-SCIMS UAB Spinal Cord Injury Model System Newly Injured Health Daily Living Consumer ... Information Network The University of Alabama at Birmingham Spinal Cord Injury Model System (UAB-SCIMS) maintains this Information Network ...

  3. Computer networks ISE a systems approach

    CERN Document Server

    Peterson, Larry L

    2007-01-01

    Computer Networks, 4E is the only introductory computer networking book written by authors who have had first-hand experience with many of the protocols discussed in the book, who have actually designed some of them as well, and who are still actively designing the computer networks today. This newly revised edition continues to provide an enduring, practical understanding of networks and their building blocks through rich, example-based instruction. The authors' focus is on the why of network design, not just the specifications comprising today's systems but how key technologies and p

  4. An operator interface design for a telerobotic inspection system

    Science.gov (United States)

    Kim, Won S.; Tso, Kam S.; Hayati, Samad

    1993-01-01

    The operator interface has recently emerged as an important element for efficient and safe interactions between human operators and telerobotics. Advances in graphical user interface and graphics technologies enable us to produce very efficient operator interface designs. This paper describes an efficient graphical operator interface design newly developed for remote surface inspection at NASA-JPL. The interface, designed so that remote surface inspection can be performed by a single operator with an integrated robot control and image inspection capability, supports three inspection strategies of teleoperated human visual inspection, human visual inspection with automated scanning, and machine-vision-based automated inspection.

  5. Systemic risk on different interbank network topologies

    Science.gov (United States)

    Lenzu, Simone; Tedeschi, Gabriele

    2012-09-01

    In this paper we develop an interbank market with heterogeneous financial institutions that enter into lending agreements on different network structures. Credit relationships (links) evolve endogenously via a fitness mechanism based on agents' performance. By changing the agent's trust on its neighbor's performance, interbank linkages self-organize themselves into very different network architectures, ranging from random to scale-free topologies. We study which network architecture can make the financial system more resilient to random attacks and how systemic risk spreads over the network. To perturb the system, we generate a random attack via a liquidity shock. The hit bank is not automatically eliminated, but its failure is endogenously driven by its incapacity to raise liquidity in the interbank network. Our analysis shows that a random financial network can be more resilient than a scale free one in case of agents' heterogeneity.

  6. User and system interface issues in the purchase of imaging and information systems.

    Science.gov (United States)

    Langer, S; Wang, J

    1996-08-01

    We introduce a set of worksheets to facilitate standardized comparisons among scheduling systems, hospital information systems, radiology information systems, and picture archiving and communication systems vendors. For each system category, we provide worksheets to evaluate the features, performance, installation requirements and costs of the included components. These worksheets will help to assure that critical user and systems interface issues are not overlooked and aid potential purchasers to make informed and objective purchasing decisions.

  7. Design and Management of Networked Information Systems

    DEFF Research Database (Denmark)

    Havn, Erling; Bansler, Jørgen P.

    1996-01-01

    -based IS. There are several reasons for this: (a) Networked IS are large and complex systems; (b) in most cases, one has to deal with a number of existing - probably heterogenous - technical hardware and software platforms and link them together in a network; (c) differences in organizational culture, work......In this paper, we present a newly started research project at the Center for Tele-Information at the Technical University of Denmark. The project focuses on the design and management of networked information systems, that is computer-based IS linked by a wide area network and supporting...... communication between geographically dispersed organizational units. Examples include logistics systems, airline booking systems, and CSCW systems. We assume that the design and implementation of networked IS is significantly more difficult and risky than the development of traditional "stand-alone" computer...

  8. ATTENTIONAL NETWORKS AND SELECTIVE VISUAL SYSTEM

    National Research Council Canada - National Science Library

    ALEJANDRO CASTILLO MORENO; ANGÉLICA PATERNINA MARÍN

    2006-01-01

    ... system.From this last point of view, we will emphasize on the attentional networks theory of Posner, thatproposes different systems to explain diverse aspects of attention, but they are related to each...

  9. A Review of Hybrid Brain-Computer Interface Systems

    Directory of Open Access Journals (Sweden)

    Setare Amiri

    2013-01-01

    Full Text Available Increasing number of research activities and different types of studies in brain-computer interface (BCI systems show potential in this young research area. Research teams have studied features of different data acquisition techniques, brain activity patterns, feature extraction techniques, methods of classifications, and many other aspects of a BCI system. However, conventional BCIs have not become totally applicable, due to the lack of high accuracy, reliability, low information transfer rate, and user acceptability. A new approach to create a more reliable BCI that takes advantage of each system is to combine two or more BCI systems with different brain activity patterns or different input signal sources. This type of BCI, called hybrid BCI, may reduce disadvantages of each conventional BCI system. In addition, hybrid BCIs may create more applications and possibly increase the accuracy and the information transfer rate. However, the type of BCIs and their combinations should be considered carefully. In this paper, after introducing several types of BCIs and their combinations, we review and discuss hybrid BCIs, different possibilities to combine them, and their advantages and disadvantages.

  10. Neural network based system for equipment surveillance

    Science.gov (United States)

    Vilim, R.B.; Gross, K.C.; Wegerich, S.W.

    1998-04-28

    A method and system are disclosed for performing surveillance of transient signals of an industrial device to ascertain the operating state. The method and system involves the steps of reading into a memory training data, determining neural network weighting values until achieving target outputs close to the neural network output. If the target outputs are inadequate, wavelet parameters are determined to yield neural network outputs close to the desired set of target outputs and then providing signals characteristic of an industrial process and comparing the neural network output to the industrial process signals to evaluate the operating state of the industrial process. 33 figs.

  11. Quantum neural network-based EEG filtering for a brain-computer interface.

    Science.gov (United States)

    Gandhi, Vaibhav; Prasad, Girijesh; Coyle, Damien; Behera, Laxmidhar; McGinnity, Thomas Martin

    2014-02-01

    A novel neural information processing architecture inspired by quantum mechanics and incorporating the well-known Schrodinger wave equation is proposed in this paper. The proposed architecture referred to as recurrent quantum neural network (RQNN) can characterize a nonstationary stochastic signal as time-varying wave packets. A robust unsupervised learning algorithm enables the RQNN to effectively capture the statistical behavior of the input signal and facilitates the estimation of signal embedded in noise with unknown characteristics. The results from a number of benchmark tests show that simple signals such as dc, staircase dc, and sinusoidal signals embedded within high noise can be accurately filtered and particle swarm optimization can be employed to select model parameters. The RQNN filtering procedure is applied in a two-class motor imagery-based brain-computer interface where the objective was to filter electroencephalogram (EEG) signals before feature extraction and classification to increase signal separability. A two-step inner-outer fivefold cross-validation approach is utilized to select the algorithm parameters subject-specifically for nine subjects. It is shown that the subject-specific RQNN EEG filtering significantly improves brain-computer interface performance compared to using only the raw EEG or Savitzky-Golay filtered EEG across multiple sessions.

  12. Mechanical Aspects of Interfaces and Surfaces in Ceramic Containing Systems.

    Science.gov (United States)

    1984-12-14

    DEPT OF MATERIALS SCIENCE AN MINERA . UNCLASSIFIED R 0 EVANS ET AL .4 DEC 84 NS@9i4-Si-K-8362 F/G 20/il N Ehmhhhhmmhomu liii-i __jjL IB1.8 11111_25 111...SCIENCE AND MINERA .. UNCLASSIFIED A G EVANS ET AL. 14 DEC 4 N880i4-Si-K-362 F/G 26/li L liii ’’ ~ 2.2 1111.25 1.4 1.6 MICROCOPY RESOLUTION TEST CHART...MECHANICAL ASPECTS OF INTERFACES AND SURFACES IN 5/5 CERAMIC CONTAINING SYSTEMS(U) CALIFORNIA UNIV BERKELEY I DEPT OF MATERIALS SCIENCE AND MINERA . UR5I FERG

  13. Designing Guiding Systems for Brain-Computer Interfaces

    Science.gov (United States)

    Kosmyna, Nataliya; Lécuyer, Anatole

    2017-01-01

    Brain–Computer Interface (BCI) community has focused the majority of its research efforts on signal processing and machine learning, mostly neglecting the human in the loop. Guiding users on how to use a BCI is crucial in order to teach them to produce stable brain patterns. In this work, we explore the instructions and feedback for BCIs in order to provide a systematic taxonomy to describe the BCI guiding systems. The purpose of our work is to give necessary clues to the researchers and designers in Human–Computer Interaction (HCI) in making the fusion between BCIs and HCI more fruitful but also to better understand the possibilities BCIs can provide to them. PMID:28824400

  14. Designing Guiding Systems for Brain-Computer Interfaces

    Directory of Open Access Journals (Sweden)

    Nataliya Kosmyna

    2017-07-01

    Full Text Available Brain–Computer Interface (BCI community has focused the majority of its research efforts on signal processing and machine learning, mostly neglecting the human in the loop. Guiding users on how to use a BCI is crucial in order to teach them to produce stable brain patterns. In this work, we explore the instructions and feedback for BCIs in order to provide a systematic taxonomy to describe the BCI guiding systems. The purpose of our work is to give necessary clues to the researchers and designers in Human–Computer Interaction (HCI in making the fusion between BCIs and HCI more fruitful but also to better understand the possibilities BCIs can provide to them.

  15. Seamless integrated network system for wireless communication systems

    NARCIS (Netherlands)

    Wu, Gang; Mizuno, Mitsuhiko; Hase, Yoshihiro; Havinga, Paul J.M.

    2006-01-01

    To create a network that connects a plurality of wireless communication systems to create optimal systems for various environments, and that seamlessly integrates the resulting systems together in order to provide more efficient and advanced service in general. A network system that can seamlessly

  16. Seamless integrated network system for wireless communication systems

    NARCIS (Netherlands)

    Wu, Gang; Mizuno, Mitsuhiko; Hase, Yoshihiro; Havinga, Paul J.M.

    2002-01-01

    To create a network that connects a plurality of wireless communication systems to create optimal systems for various environments, and that seamlessly integrates the resulting systems together in order to provide more efficient and advanced service in general. A network system that can seamlessly

  17. The mathematics of networks of linear systems

    CERN Document Server

    Fuhrmann, Paul A

    2015-01-01

    This book provides the mathematical foundations of networks of linear control systems, developed from an algebraic systems theory perspective. This includes a thorough treatment of questions of controllability, observability, realization theory, as well as feedback control and observer theory. The potential of networks for linear systems in controlling large-scale networks of interconnected dynamical systems could provide insight into a diversity of scientific and technological disciplines. The scope of the book is quite extensive, ranging from introductory material to advanced topics of current research, making it a suitable reference for graduate students and researchers in the field of networks of linear systems. Part I can be used as the basis for a first course in algebraic system theory, while Part II serves for a second, advanced, course on linear systems. Finally, Part III, which is largely independent of the previous parts, is ideally suited for advanced research seminars aimed at preparing graduate ...

  18. Modal Transition Systems as the Basis for Interface Theories and Product Lines

    DEFF Research Database (Denmark)

    Nyman, Ulrik

    This thesis presents research taking its outset in component-based software development, interface theory and software product lines, as well as modeling formalisms for describing component based software systems and their interfaces. The main part of the thesis consists of five papers. The first...... are automatically generated from a general model and the environment specifications. The next two papers each present an extension of Interface Automata. The first of these papers define Interface I/O Automata an interface theory for the I/O Automata community. The main novelty compared to previous work...... is an explicit separation of assumptions from guarantees and the presentation of a formally derived composition operator. The second of these papers present an interface theory combining Interface Automata and Modal Transition Systems into Modal I/O Automata. A formal correspondence between Interface Automata...

  19. Kinetic Interface

    DEFF Research Database (Denmark)

    2009-01-01

    A kinetic interface for orientation detection in a video training system is disclosed. The interface includes a balance platform instrumented with inertial motion sensors. The interface engages a participant's sense of balance in training exercises.......A kinetic interface for orientation detection in a video training system is disclosed. The interface includes a balance platform instrumented with inertial motion sensors. The interface engages a participant's sense of balance in training exercises....

  20. Network Physiology: How Organ Systems Dynamically Interact.

    Directory of Open Access Journals (Sweden)

    Ronny P Bartsch

    Full Text Available We systematically study how diverse physiologic systems in the human organism dynamically interact and collectively behave to produce distinct physiologic states and functions. This is a fundamental question in the new interdisciplinary field of Network Physiology, and has not been previously explored. Introducing the novel concept of Time Delay Stability (TDS, we develop a computational approach to identify and quantify networks of physiologic interactions from long-term continuous, multi-channel physiological recordings. We also develop a physiologically-motivated visualization framework to map networks of dynamical organ interactions to graphical objects encoded with information about the coupling strength of network links quantified using the TDS measure. Applying a system-wide integrative approach, we identify distinct patterns in the network structure of organ interactions, as well as the frequency bands through which these interactions are mediated. We establish first maps representing physiologic organ network interactions and discover basic rules underlying the complex hierarchical reorganization in physiologic networks with transitions across physiologic states. Our findings demonstrate a direct association between network topology and physiologic function, and provide new insights into understanding how health and distinct physiologic states emerge from networked interactions among nonlinear multi-component complex systems. The presented here investigations are initial steps in building a first atlas of dynamic interactions among organ systems.

  1. Network Physiology: How Organ Systems Dynamically Interact.

    Science.gov (United States)

    Bartsch, Ronny P; Liu, Kang K L; Bashan, Amir; Ivanov, Plamen Ch

    2015-01-01

    We systematically study how diverse physiologic systems in the human organism dynamically interact and collectively behave to produce distinct physiologic states and functions. This is a fundamental question in the new interdisciplinary field of Network Physiology, and has not been previously explored. Introducing the novel concept of Time Delay Stability (TDS), we develop a computational approach to identify and quantify networks of physiologic interactions from long-term continuous, multi-channel physiological recordings. We also develop a physiologically-motivated visualization framework to map networks of dynamical organ interactions to graphical objects encoded with information about the coupling strength of network links quantified using the TDS measure. Applying a system-wide integrative approach, we identify distinct patterns in the network structure of organ interactions, as well as the frequency bands through which these interactions are mediated. We establish first maps representing physiologic organ network interactions and discover basic rules underlying the complex hierarchical reorganization in physiologic networks with transitions across physiologic states. Our findings demonstrate a direct association between network topology and physiologic function, and provide new insights into understanding how health and distinct physiologic states emerge from networked interactions among nonlinear multi-component complex systems. The presented here investigations are initial steps in building a first atlas of dynamic interactions among organ systems.

  2. Design mobile satellite system architecture as an integral part of the cellular access digital network

    Science.gov (United States)

    Chien, E. S. K.; Marinho, J. A.; Russell, J. E., Sr.

    1988-01-01

    The Cellular Access Digital Network (CADN) is the access vehicle through which cellular technology is brought into the mainstream of the evolving integrated telecommunications network. Beyond the integrated end-to-end digital access and per call network services provisioning of the Integrated Services Digital Network (ISDN), the CADN engenders the added capability of mobility freedom via wireless access. One key element of the CADN network architecture is the standard user to network interface that is independent of RF transmission technology. Since the Mobile Satellite System (MSS) is envisioned to not only complement but also enhance the capabilities of the terrestrial cellular telecommunications network, compatibility and interoperability between terrestrial cellular and mobile satellite systems are vitally important to provide an integrated moving telecommunications network of the future. From a network standpoint, there exist very strong commonalities between the terrestrial cellular system and the mobile satellite system. Therefore, the MSS architecture should be designed as an integral part of the CADN. This paper describes the concept of the CADN, the functional architecture of the MSS, and the user-network interface signaling protocols.

  3. Evaluation of different speech and touch interfaces to in-vehicle music retrieval systems.

    Science.gov (United States)

    Garay-Vega, L; Pradhan, A K; Weinberg, G; Schmidt-Nielsen, B; Harsham, B; Shen, Y; Divekar, G; Romoser, M; Knodler, M; Fisher, D L

    2010-05-01

    In-vehicle music retrieval systems are becoming more and more popular. Previous studies have shown that they pose a real hazard to drivers when the interface is a tactile one which requires multiple entries and a combination of manual control and visual feedback. Voice interfaces exist as an alternative. Such interfaces can require either multiple or single conversational turns. In this study, each of 17 participants between the ages of 18 and 30 years old was asked to use three different music retrieval systems (one with a multiple entry touch interface, the iPod, one with a multiple turn voice interface, interface B, and one with a single turn voice interface, interface C) while driving through a virtual world. Measures of secondary task performance, eye behavior, vehicle control, and workload were recorded. When compared with the touch interface, the voice interfaces reduced the total time drivers spent with their eyes off the forward roadway, especially in prolonged glances, as well as both the total number of glances away from the forward roadway and the perceived workload. Furthermore, when compared with driving without a secondary task, both voice interfaces did not significantly impact hazard anticipation, the frequency of long glances away from the forward roadway, or vehicle control. The multiple turn voice interface (B) significantly increased both the time it took drivers to complete the task and the workload. The implications for interface design and safety are discussed. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

  4. Differential network entropy reveals cancer system hallmarks

    Science.gov (United States)

    West, James; Bianconi, Ginestra; Severini, Simone; Teschendorff, Andrew E.

    2012-01-01

    The cellular phenotype is described by a complex network of molecular interactions. Elucidating network properties that distinguish disease from the healthy cellular state is therefore of critical importance for gaining systems-level insights into disease mechanisms and ultimately for developing improved therapies. By integrating gene expression data with a protein interaction network we here demonstrate that cancer cells are characterised by an increase in network entropy. In addition, we formally demonstrate that gene expression differences between normal and cancer tissue are anticorrelated with local network entropy changes, thus providing a systemic link between gene expression changes at the nodes and their local correlation patterns. In particular, we find that genes which drive cell-proliferation in cancer cells and which often encode oncogenes are associated with reductions in network entropy. These findings may have potential implications for identifying novel drug targets. PMID:23150773

  5. Design of efficient and simple interface testing equipment for opto-electric tracking system

    Science.gov (United States)

    Liu, Qiong; Deng, Chao; Tian, Jing; Mao, Yao

    2016-10-01

    Interface testing for opto-electric tracking system is one important work to assure system running performance, aiming to verify the design result of every electronic interface matching the communication protocols or not, by different levels. Opto-electric tracking system nowadays is more complicated, composed of many functional units. Usually, interface testing is executed between units manufactured completely, highly depending on unit design and manufacture progress as well as relative people. As a result, it always takes days or weeks, inefficiently. To solve the problem, this paper promotes an efficient and simple interface testing equipment for opto-electric tracking system, consisting of optional interface circuit card, processor and test program. The hardware cards provide matched hardware interface(s), easily offered from hardware engineer. Automatic code generation technique is imported, providing adaption to new communication protocols. Automatic acquiring items, automatic constructing code architecture and automatic encoding are used to form a new program quickly with adaption. After simple steps, a standard customized new interface testing equipment with matching test program and interface(s) is ready for a waiting-test system in minutes. The efficient and simple interface testing equipment for opto-electric tracking system has worked for many opto-electric tracking system to test entire or part interfaces, reducing test time from days to hours, greatly improving test efficiency, with high software quality and stability, without manual coding. Used as a common tool, the efficient and simple interface testing equipment for opto-electric tracking system promoted by this paper has changed traditional interface testing method and created much higher efficiency.

  6. User Interface Design for E-Learning System

    OpenAIRE

    Suteja, Bernard Renaldy; Harjoko, Agus

    2008-01-01

    With the demand for e-Learning steadily growing and the ongoing struggle to convince the skeptics of thepotential of e-Learning and online virtual classrooms, quality design is the foundation for a successful DEprogram. The design of the instruction and the design of the user interface are critical elements in providingquality education with a virtual, e-Learning model. This White Paper will focus on the design of the e-Learninguser interface (UI). This paper provide examples of user interfac...

  7. HMI/ SCADA standards in the design of data center interfaces: A network operations center case study

    Directory of Open Access Journals (Sweden)

    Said Filali-Yachou

    2015-01-01

    Full Text Available En este artículo se presenta la evaluación de las interfaces de la sala del Centro de Operaciones NOC (Network Operations Cent er del NAP (Network Access Point de Canarias, siguiendo estándares y normativas HMI, así como la guía ergonómica de supervisión GEDI S. En base a los resultados obtenid os, se presenta un prototipo de mejora de la interfaz actual.El Centro de Operaciones NOC del Instituto Tecnológico y de Energías Renovables (ITER se encarga de monit orizar las diversas infraestructuras del Data Center como son l a climatización, suminis tro eléctrico, protec ción contra incendio s, seguridad, centros técnicos, parques eólicos, plantas fotovo ltaicas, así como las distintas infraestructura s desplegadas alrededor del c able submarino perteneciente al consorcio de Cana-Link (el cabl e que une la Península y Canarias, el anillo terrestre y la Red IRIS. Para unificar algunos de estos sistemas y facilitar la tarea diaria de supervisión, se emplea un software SC ADA especializad o en la gestió n de edificios.

  8. Silicon photonics-wireless interface ICs for micro-/millimeter-wave fiber-wireless networks.

    Science.gov (United States)

    Ko, Minsu; Lee, Myung-Jae; Rücker, Holger; Choi, Woo-Young

    2013-09-23

    We present two types of Si photonics-wireless interface (PWI) integrated circuits (ICs) realized in standard Si technology. Our PWI ICs convert optical signals into radio-frequency (RF) signals for downlink remote antenna units in fiber-wireless networks. Characterization and modeling of Si avalanche photodetectors (APDs) fabricated in two different Si technologies are carried out and used for PWI IC design. A 5-GHz RF-over-fiber PWI IC composed of APD, preamplifier, and power amplifier (PA) is fabricated in 0.18-μm CMOS technology and its performance is verified by 54-Mb/s wireless local area network data transmission. A 60-GHz baseband-over-fiber PWI IC containing APD, baseband photoreceiver, 60-GHz binary phase-shift keying (BPSK) modulator, and 60-GHz PA is realized in 0.25-μm SiGe BiCMOS technology. Error-free transmission of 1.6-Gb/s BPSK data in 60 GHz with this PWI IC is successfully achieved.

  9. Process query systems for network security monitoring

    Science.gov (United States)

    Berk, Vincent; Fox, Naomi

    2005-05-01

    In this paper we present the architecture of our network security monitoring infrastructure based on a Process Query System (PQS). PQS offers a new and powerful way of efficiently processing data streams, based on process descriptions that are submitted as queries. In this case the data streams are familiar network sensors, such as Snort, Netfilter, and Tripwire. The process queries describe the dynamics of network attacks and failures, such as worms, multistage attacks, and router failures. Using PQS the task of monitoring enterprise class networks is simplified, offering a priority-based GUI to the security administrator that clearly outlines events that require immediate attention. The PQS-Net system is deployed on an unsecured production network; the system has successfully detected many diverse attacks and failures.

  10. High-speed, intra-system networks

    Energy Technology Data Exchange (ETDEWEB)

    Quinn, Heather M [Los Alamos National Laboratory; Graham, Paul S [Los Alamos National Laboratory; Manuzzato, Andrea [Los Alamos National Laboratory; Fairbanks, Tom [Los Alamos National Laboratory; Dallmann, Nicholas [Los Alamos National Laboratory; Desgeorges, Rose [Los Alamos National Laboratory

    2010-06-28

    Recently, engineers have been studying on-payload networks for fast communication paths. Using intra-system networks as a means to connect devices together allows for a flexible payload design that does not rely on dedicated communication paths between devices. In this manner, the data flow architecture of the system can be dynamically reconfigured to allow data routes to be optimized for the application or configured to route around devices that are temporarily or permanently unavailable. To use intra-system networks, devices will need network controllers and switches. These devices are likely to be affected by single-event effects, which could affect data communication. In this paper we will present radiation data and performance analysis for using a Broadcom network controller in a neutron environment.

  11. Developing aircraft photonic networks for airplane systems

    DEFF Research Database (Denmark)

    White, Henry J.; Brownjohn, Nick; Baptista, João

    2013-01-01

    Achieving affordable high speed fiber optic communication networks for airplane systems has proved to be challenging. In this paper we describe a summary of the EU Framework 7 project DAPHNE (Developing Aircraft Photonic Networks). DAPHNE aimed to exploit photonic technology from terrestrial comm...

  12. Network model of security system

    Directory of Open Access Journals (Sweden)

    Adamczyk Piotr

    2016-01-01

    Full Text Available The article presents the concept of building a network security model and its application in the process of risk analysis. It indicates the possibility of a new definition of the role of the network models in the safety analysis. Special attention was paid to the development of the use of an algorithm describing the process of identifying the assets, vulnerability and threats in a given context. The aim of the article is to present how this algorithm reduced the complexity of the problem by eliminating from the base model these components that have no links with others component and as a result and it was possible to build a real network model corresponding to reality.

  13. Functional fusion of living systems with synthetic electrode interfaces.

    Science.gov (United States)

    Staufer, Oskar; Weber, Sebastian; Bengtson, C Peter; Bading, Hilmar; Spatz, Joachim P; Rustom, Amin

    2016-01-01

    The functional fusion of "living" biomaterial (such as cells) with synthetic systems has developed into a principal ambition for various scientific disciplines. In particular, emerging fields such as bionics and nanomedicine integrate advanced nanomaterials with biomolecules, cells and organisms in order to develop novel strategies for applications, including energy production or real-time diagnostics utilizing biomolecular machineries "perfected" during billion years of evolution. To date, hardware-wetware interfaces that sample or modulate bioelectric potentials, such as neuroprostheses or implantable energy harvesters, are mostly based on microelectrodes brought into the closest possible contact with the targeted cells. Recently, the possibility of using electrochemical gradients of the inner ear for technical applications was demonstrated using implanted electrodes, where 1.12 nW of electrical power was harvested from the guinea pig endocochlear potential for up to 5 h (Mercier, P.; Lysaght, A.; Bandyopadhyay, S.; Chandrakasan, A.; Stankovic, K. Nat. Biotech. 2012, 30, 1240-1243). More recent approaches employ nanowires (NWs) able to penetrate the cellular membrane and to record extra- and intracellular electrical signals, in some cases with subcellular resolution (Spira, M.; Hai, A. Nat. Nano. 2013, 8, 83-94). Such techniques include nanoelectric scaffolds containing free-standing silicon NWs (Robinson, J. T.; Jorgolli, M.; Shalek, A. K.; Yoon, M. H.; Gertner, R. S.; Park, H. Nat Nanotechnol. 2012, 10, 180-184) or NW field-effect transistors (Qing, Q.; Jiang, Z.; Xu, L.; Gao, R.; Mai, L.; Lieber, C. Nat. Nano. 2013, 9, 142-147), vertically aligned gallium phosphide NWs (Hällström, W.; Mårtensson, T.; Prinz, C.; Gustavsson, P.; Montelius, L.; Samuelson, L.; Kanje, M. Nano Lett. 2007, 7, 2960-2965) or individually contacted, electrically active carbon nanofibers. The latter of these approaches is capable of recording electrical responses from oxidative events

  14. Functional fusion of living systems with synthetic electrode interfaces

    Directory of Open Access Journals (Sweden)

    Oskar Staufer

    2016-02-01

    Full Text Available The functional fusion of “living” biomaterial (such as cells with synthetic systems has developed into a principal ambition for various scientific disciplines. In particular, emerging fields such as bionics and nanomedicine integrate advanced nanomaterials with biomolecules, cells and organisms in order to develop novel strategies for applications, including energy production or real-time diagnostics utilizing biomolecular machineries “perfected” during billion years of evolution. To date, hardware–wetware interfaces that sample or modulate bioelectric potentials, such as neuroprostheses or implantable energy harvesters, are mostly based on microelectrodes brought into the closest possible contact with the targeted cells. Recently, the possibility of using electrochemical gradients of the inner ear for technical applications was demonstrated using implanted electrodes, where 1.12 nW of electrical power was harvested from the guinea pig endocochlear potential for up to 5 h (Mercier, P.; Lysaght, A.; Bandyopadhyay, S.; Chandrakasan, A.; Stankovic, K. Nat. Biotech. 2012, 30, 1240–1243. More recent approaches employ nanowires (NWs able to penetrate the cellular membrane and to record extra- and intracellular electrical signals, in some cases with subcellular resolution (Spira, M.; Hai, A. Nat. Nano. 2013, 8, 83–94. Such techniques include nanoelectric scaffolds containing free-standing silicon NWs (Robinson, J. T.; Jorgolli, M.; Shalek, A. K.; Yoon, M. H.; Gertner, R. S.; Park, H. Nat Nanotechnol. 2012, 10, 180–184 or NW field-effect transistors (Qing, Q.; Jiang, Z.; Xu, L.; Gao, R.; Mai, L.; Lieber, C. Nat. Nano. 2013, 9, 142–147, vertically aligned gallium phosphide NWs (Hällström, W.; Mårtensson, T.; Prinz, C.; Gustavsson, P.; Montelius, L.; Samuelson, L.; Kanje, M. Nano Lett. 2007, 7, 2960–2965 or individually contacted, electrically active carbon nanofibers. The latter of these approaches is capable of recording

  15. Network Basic Language Translation System: Security Infrastructure

    National Research Council Canada - National Science Library

    Mittrick, Mark R

    2007-01-01

    .... The Network Basic Language Translation System (NetBLTS) was proposed and accepted as part of the U.S. Army Research Laboratory's offering of initiatives within the Horizontal Fusion portfolio in 2003...

  16. Interface diagram: Design tool for supporting the development of modularity in complex product systems

    DEFF Research Database (Denmark)

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf

    2014-01-01

    . This article presents a visual design tool –the Interface diagram– which aims to support the engineering process of developing modularity in complex product systems. The tool is a model of a product system representing the arrangement of its elements and their interfaces. The tool has similar characteristics...... the activity of decomposing a product system into modules consisting of components developed by different engineering teams. The usefulness of the Interface diagram has been tested in an industrial development project showing positive results of shortening the lead time and minimising rework. Moreover......, the Interface diagram has been used in interplay with a broader Product Lifecycle Management system. This allows the product structures from the Interface diagram to be enriched with detailed product documentation like computer-aided design, requirements, view models, design specifications and interface...

  17. Network support for system initiated checkpoints

    Science.gov (United States)

    Chen, Dong; Heidelberger, Philip

    2013-01-29

    A system, method and computer program product for supporting system initiated checkpoints in parallel computing systems. The system and method generates selective control signals to perform checkpointing of system related data in presence of messaging activity associated with a user application running at the node. The checkpointing is initiated by the system such that checkpoint data of a plurality of network nodes may be obtained even in the presence of user applications running on highly parallel computers that include ongoing user messaging activity.

  18. Network science, nonlinear science and infrastructure systems

    CERN Document Server

    2007-01-01

    Network Science, Nonlinear Science and Infrastructure Systems has been written by leading scholars in these areas. Its express purpose is to develop common theoretical underpinnings to better solve modern infrastructural problems. It is felt by many who work in these fields that many modern communication problems, ranging from transportation networks to telecommunications, Internet, supply chains, etc., are fundamentally infrastructure problems. Moreover, these infrastructure problems would benefit greatly from a confluence of theoretical and methodological work done with the areas of Network Science, Dynamical Systems and Nonlinear Science. This book is dedicated to the formulation of infrastructural tools that will better solve these types of infrastructural problems. .

  19. Ethical Issues in Network System Design

    Directory of Open Access Journals (Sweden)

    Duncan Langford

    1997-05-01

    Full Text Available Today, most desktop computers and PCs are networked that is, they have the ability to link to other machines, usually to access data and other information held remotely. Such machines may sometimes be connected directly to each other, as part of an office or company computer system. More frequently, however, connected machines are at a considerable distance from each other, typically connected through links to global systems such as the Internet, or World Wide Web (WWW. The networked machine itself may be anything from a powerful company computer with direct Internet connections, to a small hobbyist machine, accessing a bulletin board through telephone and modem. It is important to remember that, whatever the type or the location of networked machines, their access to the network, and the network itself, was planned and constructed following deliberate design considerations. In this paper I discuss some ways in which the technical design of computer systems might appropriately be influenced by ethical issues, and examine pressures on computer scientists and others to technically control network related actions perceived as 'unethical'. After examination of the current situation, I draw together the issues, and conclude by suggesting some ethically based recommendations for the future design of networked systems.

  20. System and Method for Providing a Climate Data Analytic Services Application Programming Interface Distribution Package

    Science.gov (United States)

    Schnase, John L. (Inventor); Duffy, Daniel Q. (Inventor); Tamkin, Glenn S. (Inventor)

    2016-01-01

    A system, method and computer-readable storage devices for providing a climate data analytic services application programming interface distribution package. The example system can provide various components. The system provides a climate data analytic services application programming interface library that enables software applications running on a client device to invoke the capabilities of a climate data analytic service. The system provides a command-line interface that provides a means of interacting with a climate data analytic service by issuing commands directly to the system's server interface. The system provides sample programs that call on the capabilities of the application programming interface library and can be used as templates for the construction of new client applications. The system can also provide test utilities, build utilities, service integration utilities, and documentation.

  1. Description of waste pretreatment and interfacing systems dynamic simulation model

    Energy Technology Data Exchange (ETDEWEB)

    Garbrick, D.J.; Zimmerman, B.D.

    1995-05-01

    The Waste Pretreatment and Interfacing Systems Dynamic Simulation Model was created to investigate the required pretreatment facility processing rates for both high level and low level waste so that the vitrification of tank waste can be completed according to the milestones defined in the Tri-Party Agreement (TPA). In order to achieve this objective, the processes upstream and downstream of the pretreatment facilities must also be included. The simulation model starts with retrieval of tank waste and ends with vitrification for both low level and high level wastes. This report describes the results of three simulation cases: one based on suggested average facility processing rates, one with facility rates determined so that approximately 6 new DSTs are required, and one with facility rates determined so that approximately no new DSTs are required. It appears, based on the simulation results, that reasonable facility processing rates can be selected so that no new DSTs are required by the TWRS program. However, this conclusion must be viewed with respect to the modeling assumptions, described in detail in the report. Also included in the report, in an appendix, are results of two sensitivity cases: one with glass plant water recycle steams recycled versus not recycled, and one employing the TPA SST retrieval schedule versus a more uniform SST retrieval schedule. Both recycling and retrieval schedule appear to have a significant impact on overall tank usage.

  2. Smart Sensor Network System For Environment Monitoring

    Directory of Open Access Journals (Sweden)

    Javed Ali Baloch

    2012-07-01

    Full Text Available SSN (Smart Sensor Network systems could be used to monitor buildings with modern infrastructure, plant sites with chemical pollution, horticulture, natural habitat, wastewater management and modern transport system. To sense attributes of phenomena and make decisions on the basis of the sensed value is the primary goal of such systems. In this paper a Smart Spatially aware sensor system is presented. A smart system, which could continuously monitor the network to observe the functionality and trigger, alerts to the base station if a change in the system occurs and provide feedback periodically, on demand or even continuously depending on the nature of the application. The results of the simulation trials presented in this paper exhibit the performance of a Smart Spatially Aware Sensor Networks.

  3. WIRELESS SENSOR NETWORK BASED CONVEYOR SURVEILLANCE SYSTEM

    OpenAIRE

    Attila Trohák; Máté Kolozsi-Tóth; Péter Rádi

    2011-01-01

    In the paper we will introduce an intelligent conveyor surveillance system. We started a research project to design and develop a conveyor surveillance system based on wireless sensor network and GPRS communication. Our system is able to measure temperature on fixed and moving, rotating surfaces and able to detect smoke. We would like to introduce the developed devices and give an application example.

  4. The Device Centric Communication System for 5G Networks

    Science.gov (United States)

    Biswash, S. K.; Jayakody, D. N. K.

    2017-01-01

    The Fifth Generation Communication (5G) networks have several functional features such as: Massive Multiple Input and Multiple Output (MIMO), Device centric data and voice support, Smarter-device communications, etc. The objective for 5G networks is to gain the 1000x more throughput, 10x spectral efficiency, 100 x more energy efficiency than existing technologies. The 5G system will provide the balance between the Quality of Experience (QoE) and the Quality of Service (QoS), without compromising the user benefit. The data rate has been the key metric for wireless QoS; QoE deals with the delay and throughput. In order to realize a balance between the QoS and QoE, we propose a cellular Device centric communication methodology for the overlapping network coverage area in the 5G communication system. The multiple beacon signals mobile tower refers to an overlapping network area, and a user must be forwarded to the next location area. To resolve this issue, we suggest the user centric methodology (without Base Station interface) to handover the device in the next area, until the users finalize the communication. The proposed method will reduce the signalling cost and overheads for the communication.

  5. Automated Analysis of Security in Networking Systems

    DEFF Research Database (Denmark)

    Buchholtz, Mikael

    2004-01-01

    It has for a long time been a challenge to built secure networking systems. One way to counter this problem is to provide developers of software applications for networking systems with easy-to-use tools that can check security properties before the applications ever reach the marked. These tools...... will both help raise the general level of awareness of the problems and prevent the most basic flaws from occurring. This thesis contributes to the development of such tools. Networking systems typically try to attain secure communication by applying standard cryptographic techniques. In this thesis...... attacks, and attacks launched by insiders. Finally, the perspectives for the application of the analysis techniques are discussed, thereby, coming a small step closer to providing developers with easy- to-use tools for validating the security of networking applications....

  6. [Renewal of NIHS computer network system].

    Science.gov (United States)

    Segawa, Katsunori; Nakano, Tatsuya; Saito, Yoshiro

    2012-01-01

    Updated version of National Institute of Health Sciences Computer Network System (NIHS-NET) is described. In order to reduce its electric power consumption, the main server system was newly built using the virtual machine technology. The service that each machine provided in the previous network system should be maintained as much as possible. Thus, the individual server was constructed for each service, because a virtual server often show decrement in its performance as compared with a physical server. As a result, though the number of virtual servers was increased and the network communication became complicated among the servers, the conventional service was able to be maintained, and security level was able to be rather improved, along with saving electrical powers. The updated NIHS-NET bears multiple security countermeasures. To maximal use of these measures, awareness for the network security by all users is expected.

  7. Design and Realization of Network Teaching System

    Directory of Open Access Journals (Sweden)

    Ji Shan Shan

    2016-01-01

    Full Text Available Since 21 century, with the wide spread in family and public, network has been applied in many new fields, and the application in classes is of no exception. In traditional education, teachers give lessons to students face to face. Hence, the teaching quality depends largely on the quality and initiative of the individual teacher. However, the serious disadvantages of this mode are that teachers completely dominate the classroom and may ignore the subjective cognition role of the students, which may be bad for the growth of creativity and the innovative thinking ability. Obviously, traditional education mode cannot meet the requirements of the this new era which leads to the booming developing tendency of the network. As a new teaching measure, scientifically combining modern information technology and teaching practice, network teaching not only changes the traditional education by the means and form, but even also gives new meanings to teaching concept, process, method as well as teacher-student role and other deep levels. With the help of network teaching system, on-line classroom learning, relevant information systematization, standardization and automation, this system provides students with an efficient online learning method with high quality. This also helps to solve the disadvantages of the traditional teaching mode and promote the teaching methods to a new stage. It improves the network teaching platform, enriches the network teaching resources, and establishes a network teaching system, so as to improve information quality of teachers and students and assist in improving teaching quality of schools.

  8. Energy conversion at liquid/liquid interfaces: artificial photosynthetic systems

    Science.gov (United States)

    Volkov, A. G.; Gugeshashvili, M. I.; Deamer, D. W.

    1995-01-01

    This chapter focuses on multielectron reactions in organized assemblies of molecules at the liquid/liquid interface. We describe the thermodynamic and kinetic parameters of such reactions, including the structure of the reaction centers, charge movement along the electron transfer pathways, and the role of electric double layers in artificial photosynthesis. Some examples of artificial photosynthesis at the oil/water interface are considered, including water photooxidation to the molecular oxygen, oxygen photoreduction, photosynthesis of amphiphilic compounds and proton evolution by photochemical processes.

  9. Approaches in highly parameterized inversion-PESTCommander, a graphical user interface for file and run management across networks

    Science.gov (United States)

    Karanovic, Marinko; Muffels, Christopher T.; Tonkin, Matthew J.; Hunt, Randall J.

    2012-01-01

    Models of environmental systems have become increasingly complex, incorporating increasingly large numbers of parameters in an effort to represent physical processes on a scale approaching that at which they occur in nature. Consequently, the inverse problem of parameter estimation (specifically, model calibration) and subsequent uncertainty analysis have become increasingly computation-intensive endeavors. Fortunately, advances in computing have made computational power equivalent to that of dozens to hundreds of desktop computers accessible through a variety of alternate means: modelers have various possibilities, ranging from traditional Local Area Networks (LANs) to cloud computing. Commonly used parameter estimation software is well suited to take advantage of the availability of such increased computing power. Unfortunately, logistical issues become increasingly important as an increasing number and variety of computers are brought to bear on the inverse problem. To facilitate efficient access to disparate computer resources, the PESTCommander program documented herein has been developed to provide a Graphical User Interface (GUI) that facilitates the management of model files ("file management") and remote launching and termination of "slave" computers across a distributed network of computers ("run management"). In version 1.0 described here, PESTCommander can access and ascertain resources across traditional Windows LANs: however, the architecture of PESTCommander has been developed with the intent that future releases will be able to access computing resources (1) via trusted domains established in Wide Area Networks (WANs) in multiple remote locations and (2) via heterogeneous networks of Windows- and Unix-based operating systems. The design of PESTCommander also makes it suitable for extension to other computational resources, such as those that are available via cloud computing. Version 1.0 of PESTCommander was developed primarily to work with the

  10. Spatial Models and Networks of Living Systems

    DEFF Research Database (Denmark)

    Juul, Jeppe Søgaard

    When studying the dynamics of living systems, insight can often be gained by developing a mathematical model that can predict future behaviour of the system or help classify system characteristics. However, in living cells, organisms, and especially groups of interacting individuals, a large number....... Such systems are known to be stabilized by spatial structure. Finally, I analyse data from a large mobile phone network and show that people who are topologically close in the network have similar communication patterns. This main part of the thesis is based on six different articles, which I have co...

  11. Reconfigurable radio systems network architectures and standards

    CERN Document Server

    Iacobucci, Maria Stella

    2013-01-01

    This timely book provides a standards-based view of the development, evolution, techniques and potential future scenarios for the deployment of reconfigurable radio systems.  After an introduction to radiomobile and radio systems deployed in the access network, the book describes cognitive radio concepts and capabilities, which are the basis for reconfigurable radio systems.  The self-organizing network features introduced in 3GPP standards are discussed and IEEE 802.22, the first standard based on cognitive radio, is described. Then the ETSI reconfigurable radio systems functional ar

  12. Deterministic System Identification Using RBF Networks

    Directory of Open Access Journals (Sweden)

    Joilson Batista de Almeida Rego

    2014-01-01

    Full Text Available This paper presents an artificial intelligence application using a nonconventional mathematical tool: the radial basis function (RBF networks, aiming to identify the current plant of an induction motor or other nonlinear systems. Here, the objective is to present the RBF response to different nonlinear systems and analyze the obtained results. A RBF network is trained and simulated in order to obtain the dynamical solution with basin of attraction and equilibrium point for known and unknown system and establish a relationship between these dynamical systems and the RBF response. On the basis of several examples, the results indicating the effectiveness of this approach are demonstrated.

  13. User interface design principles for the SSM/PMAD automated power system

    Science.gov (United States)

    Jakstas, Laura M.; Myers, Chris J.

    1991-01-01

    Martin Marietta has developed a user interface for the space station module power management and distribution (SSM/PMAD) automated power system testbed which provides human access to the functionality of the power system, as well as exemplifying current techniques in user interface design. The testbed user interface was designed to enable an engineer to operate the system easily without having significant knowledge of computer systems, as well as provide an environment in which the engineer can monitor and interact with the SSM/PMAD system hardware. The design of the interface supports a global view of the most important data from the various hardware and software components, as well as enabling the user to obtain additional or more detailed data when needed. The components and representations of the SSM/PMAD testbed user interface are examined. An engineer's interactions with the system are also described.

  14. AtPID: the overall hierarchical functional protein interaction network interface and analytic platform for Arabidopsis.

    Science.gov (United States)

    Li, Peng; Zang, Weidong; Li, Yuhua; Xu, Feng; Wang, Jigang; Shi, Tieliu

    2011-01-01

    Protein interactions are involved in important cellular functions and biological processes that are the fundamentals of all life activities. With improvements in experimental techniques and progress in research, the overall protein interaction network frameworks of several model organisms have been created through data collection and integration. However, most of the networks processed only show simple relationships without boundary, weight or direction, which do not truly reflect the biological reality. In vivo, different types of protein interactions, such as the assembly of protein complexes or phosphorylation, often have their specific functions and qualifications. Ignorance of these features will bring much bias to the network analysis and application. Therefore, we annotate the Arabidopsis proteins in the AtPID database with further information (e.g. functional annotation, subcellular localization, tissue-specific expression, phosphorylation information, SNP phenotype and mutant phenotype, etc.) and interaction qualifications (e.g. transcriptional regulation, complex assembly, functional collaboration, etc.) via further literature text mining and integration of other resources. Meanwhile, the related information is vividly displayed to users through a comprehensive and newly developed display and analytical tools. The system allows the construction of tissue-specific interaction networks with display of canonical pathways. The latest updated AtPID database is available at http://www.megabionet.org/atpid/.

  15. Web-based metabolic network visualization with a zooming user interface

    Science.gov (United States)

    2011-01-01

    Background Displaying complex metabolic-map diagrams, for Web browsers, and allowing users to interact with them for querying and overlaying expression data over them is challenging. Description We present a Web-based metabolic-map diagram, which can be interactively explored by the user, called the Cellular Overview. The main characteristic of this application is the zooming user interface enabling the user to focus on appropriate granularities of the network at will. Various searching commands are available to visually highlight sets of reactions, pathways, enzymes, metabolites, and so on. Expression data from single or multiple experiments can be overlaid on the diagram, which we call the Omics Viewer capability. The application provides Web services to highlight the diagram and to invoke the Omics Viewer. This application is entirely written in JavaScript for the client browsers and connect to a Pathway Tools Web server to retrieve data and diagrams. It uses the OpenLayers library to display tiled diagrams. Conclusions This new online tool is capable of displaying large and complex metabolic-map diagrams in a very interactive manner. This application is available as part of the Pathway Tools software that powers multiple metabolic databases including Biocyc.org: The Cellular Overview is accessible under the Tools menu. PMID:21595965

  16. A FPGA-based Network Interface Card with GPUDirect enabling realtime GPU computing in HEP experiments

    CERN Document Server

    Lonardo, Alessandro; Ammendola, Roberto; Biagioni, Andrea; Cotta Ramusino, Angelo; Fiorini, Massimiliano; Frezza, Ottorino; Lamanna, Gianluca; Lo Cicero, Francesca; Martinelli, Michele; Neri, Ilaria; Paolucci, Pier Stanislao; Pastorelli, Elena; Pontisso, Luca; Rossetti, Davide; Simeone, Francesco; Simula, Francesco; Sozzi, Marco; Tosoratto, Laura; Vicini, Piero

    2015-01-01

    The capability of processing high bandwidth data streams in real-time is a computational requirement common to many High Energy Physics experiments. Keeping the latency of the data transport tasks under control is essential in order to meet this requirement. We present NaNet, a FPGA-based PCIe Network Interface Card design featuring Remote Direct Memory Access towards CPU and GPU memories plus a transport protocol offload module characterized by cycle-accurate upper-bound handling. The combination of these two features allows to relieve almost entirely the OS and the application from data tranfer management, minimizing the unavoidable jitter effects associated to OS process scheduling. The design currently supports one GbE (1000Base-T) and three custom 34 Gbps APElink I/O channels, but four-channels 10GbE (10Base-R) and 2.5 Gbps deterministic latency KM3link versions are being implemented. Two use cases of NaNet will be discussed: the GPU-based low level trigger for the RICH detector in the NA62 experiment an...

  17. Web-based metabolic network visualization with a zooming user interface

    Directory of Open Access Journals (Sweden)

    Karp Peter D

    2011-05-01

    Full Text Available Abstract Background Displaying complex metabolic-map diagrams, for Web browsers, and allowing users to interact with them for querying and overlaying expression data over them is challenging. Description We present a Web-based metabolic-map diagram, which can be interactively explored by the user, called the Cellular Overview. The main characteristic of this application is the zooming user interface enabling the user to focus on appropriate granularities of the network at will. Various searching commands are available to visually highlight sets of reactions, pathways, enzymes, metabolites, and so on. Expression data from single or multiple experiments can be overlaid on the diagram, which we call the Omics Viewer capability. The application provides Web services to highlight the diagram and to invoke the Omics Viewer. This application is entirely written in JavaScript for the client browsers and connect to a Pathway Tools Web server to retrieve data and diagrams. It uses the OpenLayers library to display tiled diagrams. Conclusions This new online tool is capable of displaying large and complex metabolic-map diagrams in a very interactive manner. This application is available as part of the Pathway Tools software that powers multiple metabolic databases including Biocyc.org: The Cellular Overview is accessible under the Tools menu.

  18. Probabilistic rainfall warning system with an interactive user interface

    Science.gov (United States)

    Koistinen, Jarmo; Hohti, Harri; Kauhanen, Janne; Kilpinen, Juha; Kurki, Vesa; Lauri, Tuomo; Nurmi, Pertti; Rossi, Pekka; Jokelainen, Miikka; Heinonen, Mari; Fred, Tommi; Moisseev, Dmitri; Mäkelä, Antti

    2013-04-01

    A real time 24/7 automatic alert system is in operational use at the Finnish Meteorological Institute (FMI). It consists of gridded forecasts of the exceedance probabilities of rainfall class thresholds in the continuous lead time range of 1 hour to 5 days. Nowcasting up to six hours applies ensemble member extrapolations of weather radar measurements. With 2.8 GHz processors using 8 threads it takes about 20 seconds to generate 51 radar based ensemble members in a grid of 760 x 1226 points. Nowcasting exploits also lightning density and satellite based pseudo rainfall estimates. The latter ones utilize convective rain rate (CRR) estimate from Meteosat Second Generation. The extrapolation technique applies atmospheric motion vectors (AMV) originally developed for upper wind estimation with satellite images. Exceedance probabilities of four rainfall accumulation categories are computed for the future 1 h and 6 h periods and they are updated every 15 minutes. For longer forecasts exceedance probabilities are calculated for future 6 and 24 h periods during the next 4 days. From approximately 1 hour to 2 days Poor man's Ensemble Prediction System (PEPS) is used applying e.g. the high resolution short range Numerical Weather Prediction models HIRLAM and AROME. The longest forecasts apply EPS data from the European Centre for Medium Range Weather Forecasts (ECMWF). The blending of the ensemble sets from the various forecast sources is performed applying mixing of accumulations with equal exceedance probabilities. The blending system contains a real time adaptive estimator of the predictability of radar based extrapolations. The uncompressed output data are written to file for each member, having total size of 10 GB. Ensemble data from other sources (satellite, lightning, NWP) are converted to the same geometry as the radar data and blended as was explained above. A verification system utilizing telemetering rain gauges has been established. Alert dissemination e.g. for

  19. A network-based dynamical ranking system

    CERN Document Server

    Motegi, Shun

    2012-01-01

    Ranking players or teams in sports is of practical interests. From the viewpoint of networks, a ranking system is equivalent a centrality measure for sports networks, whereby a directed link represents the result of a single game. Previously proposed network-based ranking systems are derived from static networks, i.e., aggregation of the results of games over time. However, the score (i.e., strength) of a player, for example, depends on time. Defeating a renowned player in the peak performance is intuitively more rewarding than defeating the same player in other periods. To account for this factor, we propose a dynamic variant of such a network-based ranking system and apply it to professional men's tennis data. Our ranking system, also interpreted as a centrality measure for directed temporal networks, has two parameters. One parameter represents the exponential decay rate of the past score, and the other parameter controls the effect of indirect wins on the score. We derive a set of linear online update equ...

  20. From User Interface Usability to the Overall Usability of Interactive Systems: Adding Usability in System Architecture

    Science.gov (United States)

    Taleb, Mohamed; Seffah, Ahmed; Engleberg, Daniel

    Traditional interactive system architectures such as MVC and PAC decompose the system into subsystems that are relatively independent, thereby allowing the design work to be partitioned between the user interfaces and underlying functionalities. Such architectures extend the independence assumption to usability, approaching the design of the user interface as a subsystem that can be designed and tested independently from the underlying functionality. This Cartesian dichotomy can be fallacious, as functionalities buried in the application’s logic can sometimes affect the usability of the system. Our investigations model the relationships between internal software attributes and externally visible usability factors. We propose a pattern-based approach for dealing with these relationships. We conclude by discussing how these patterns can lead to a methodological framework for improving interactive system architec-tures, and how these patterns can support the integration of usability in the software design process.

  1. Extending the POSIX I/O interface: a parallel file system perspective.

    Energy Technology Data Exchange (ETDEWEB)

    Vilayannur, M.; Lang, S.; Ross, R.; Klundt, R.; Ward, L.; Mathematics and Computer Science; VMWare, Inc.; SNL

    2008-12-11

    The POSIX interface does not lend itself well to enabling good performance for high-end applications. Extensions are needed in the POSIX I/O interface so that high-concurrency HPC applications running on top of parallel file systems perform well. This paper presents the rationale, design, and evaluation of a reference implementation of a subset of the POSIX I/O interfaces on a widely used parallel file system (PVFS) on clusters. Experimental results on a set of micro-benchmarks confirm that the extensions to the POSIX interface greatly improve scalability and performance.

  2. A user interface development tool for space science systems Transportable Applications Environment (TAE) Plus

    Science.gov (United States)

    Szczur, Martha R.

    1990-01-01

    The Transportable Applications Environment Plus (TAE PLUS), developed at NASA's Goddard Space Flight Center, is a portable What You See Is What You Get (WYSIWYG) user interface development and management system. Its primary objective is to provide an integrated software environment that allows interactive prototyping and development that of user interfaces, as well as management of the user interface within the operational domain. Although TAE Plus is applicable to many types of applications, its focus is supporting user interfaces for space applications. This paper discusses what TAE Plus provides and how the implementation has utilized state-of-the-art technologies within graphic workstations, windowing systems and object-oriented programming languages.

  3. A Review of Interface Electronic Systems for AT-cut Quartz Crystal Microbalance Applications in Liquids

    Directory of Open Access Journals (Sweden)

    Antonio Arnau

    2008-01-01

    Full Text Available From the first applications of AT-cut quartz crystals as sensors in solutionsmore than 20 years ago, the so-called quartz crystal microbalance (QCM sensor isbecoming into a good alternative analytical method in a great deal of applications such asbiosensors, analysis of biomolecular interactions, study of bacterial adhesion at specificinterfaces, pathogen and microorganism detection, study of polymer film-biomolecule orcell-substrate interactions, immunosensors and an extensive use in fluids and polymercharacterization and electrochemical applications among others. The appropriateevaluation of this analytical method requires recognizing the different steps involved andto be conscious of their importance and limitations. The first step involved in a QCMsystem is the accurate and appropriate characterization of the sensor in relation to thespecific application. The use of the piezoelectric sensor in contact with solutions stronglyaffects its behavior and appropriate electronic interfaces must be used for an adequatesensor characterization. Systems based on different principles and techniques have beenimplemented during the last 25 years. The interface selection for the specific application isimportant and its limitations must be known to be conscious of its suitability, and foravoiding the possible error propagation in the interpretation of results. This article presentsa comprehensive overview of the different techniques used for AT-cut quartz crystalmicrobalance in in-solution applications, which are based on the following principles:network or impedance analyzers, decay methods, oscillators and lock-in techniques. Theelectronic interfaces based on oscillators and phase-locked techniques are treated in detail,with the description of different configurations, since these techniques are the most used inapplications for detection of analytes in solutions, and in those where a fast sensorresponse is necessary.

  4. Network Management using Multi-Agents System

    Directory of Open Access Journals (Sweden)

    Nestor DUQUE

    2013-07-01

    Full Text Available This paper aims to present a multiagent system for network management. The models developed for the proposed system defines certain intelligent agents interact to achieve the objectives and requirements of the multiagent organization.These agents have the property of being adaptive, acquire knowledge and skills to make decisions according to the actual state of the network that is represented in the information base, MIB, SNMP devices. The ideal state of the network policy is defined by the end user entered, which contain the value that should have performance variables and other parameters such as the frequency with which these variables should be monitored.. An agent based architecture increase the integration, adaptability, cooperation, autonomy and the efficient operation in heterogeneous environment in the network supervision. 

  5. Network Management using Multi-Agents System

    Directory of Open Access Journals (Sweden)

    Gustavo ISAZA

    2012-12-01

    Full Text Available This paper aims to present a multiagent system for network management. The models developed for the proposed system defines certain intelligent agents interact to achieve the objectives and requirements of the multiagent organization.These agents have the property of being adaptive, acquire knowledge and skills to make decisions according to the actual state of the network that is represented in the information base, MIB, SNMP devices. The ideal state of the network policy is defined by the end user entered, which contain the value that should have performance variables and other parameters such as the frequency with which these variables should be monitored.. An agent based architecture increase the integration, adaptability, cooperation, autonomy and the efficient operation in heterogeneous environment in the network supervision. 

  6. CLIPS based decision support system for water distribution networks

    Directory of Open Access Journals (Sweden)

    K. Sandeep

    2011-10-01

    Full Text Available The difficulty in knowledge representation of a water distribution network (WDN problem has contributed to the limited use of artificial intelligence (AI based expert systems (ES in the management of these networks. This paper presents a design of a Decision Support System (DSS that facilitates "on-demand'' knowledge generation by utilizing results of simulation runs of a suitably calibrated and validated hydraulic model of an existing aged WDN corresponding to emergent or even hypothetical but likely scenarios. The DSS augments the capability of a conventional expert system by integrating together the hydraulic modelling features with heuristics based knowledge of experts under a common, rules based, expert shell named CLIPS (C Language Integrated Production System. In contrast to previous ES, the knowledge base of the DSS has been designed to be dynamic by superimposing CLIPS on Structured Query Language (SQL. The proposed ES has an inbuilt calibration module that enables calibration of an existing (aged WDN for the unknown, and unobservable, Hazen-Williams C-values. In addition, the daily run and simulation modules of the proposed ES further enable the CLIPS inference engine to evaluate the network performance for any emergent or suggested test scenarios. An additional feature of the proposed design is that the DSS integrates computational platforms such as MATLAB, open source Geographical Information System (GIS, and a relational database management system (RDBMS working under the umbrella of the Microsoft Visual Studio based common user interface. The paper also discusses implementation of the proposed framework on a case study and clearly demonstrates the utility of the application as an able aide for effective management of the study network.

  7. IDMS: A System to Verify Component Interface Completeness and Compatibility for Product Integration

    Science.gov (United States)

    Areeprayolkij, Wantana; Limpiyakorn, Yachai; Gansawat, Duangrat

    The growing approach of Component-Based software Development has had a great impact on today system architectural design. However, the design of subsystems that lacks interoperability and reusability can cause problems during product integration. At worst, this may result in project failure. In literature, it is suggested that the verification of interface descriptions and management of interface changes are factors essential to the success of product integration process. This paper thus presents an automation approach to facilitate reviewing component interfaces for completeness and compatibility. The Interface Descriptions Management System (IDMS) has been implemented to ease and fasten the interface review activities using UML component diagrams as input. The method of verifying interface compatibility is accomplished by traversing the component dependency graph called Component Compatibility Graph (CCG). CCG is the visualization of which each node represents a component, and each edge represents communications between associated components. Three case studies were studied to subjectively evaluate the correctness and usefulness of IDMS.

  8. Ecological Design of Cooperative Human-Machine Interfaces for Safety of Intelligent Transport Systems

    Directory of Open Access Journals (Sweden)

    Orekhov Aleksandr

    2016-01-01

    Full Text Available The paper describes research results in the domain of cooperative intelligent transport systems. The requirements for human-machine interface considering safety issue of for intelligent transport systems (ITSare analyzed. Profiling of the requirements to cooperative human-machine interface (CHMI for such systems including requirements to usability and safety is based on a set of standards for ITSs. An approach and design technique of cooperative human-machine interface for ITSs are suggested. The architecture of cloud-based CHMI for intelligent transport systems has been developed. The prototype of software system CHMI4ITSis described.

  9. Understanding Supply Networks from Complex Adaptive Systems

    Directory of Open Access Journals (Sweden)

    Jamur Johnas Marchi

    2014-10-01

    Full Text Available This theoretical paper is based on complex adaptive systems (CAS that integrate dynamic and holistic elements, aiming to discuss supply networks as complex systems and their dynamic and co-evolutionary processes. The CAS approach can give clues to understand the dynamic nature and co-evolution of supply networks because it consists of an approach that incorporates systems and complexity. This paper’s overall contribution is to reinforce the theoretical discussion of studies that have addressed supply chain issues, such as CAS.

  10. Rational positive systems for reaction networks

    NARCIS (Netherlands)

    J.H. van Schuppen (Jan)

    2003-01-01

    textabstractThe purpose of the lecture associated with this paper is to present problems, concepts, and theorems of control and system theory for a subclass of the rational positive systems of which examples have been published as models of biochemical cell reaction networks. The recent advances in

  11. Designing Networked Adaptive Interactive Hybrid Systems

    NARCIS (Netherlands)

    Kester, L.J.H.M.

    2008-01-01

    Advances in network technologies enable distributed systems, operating in complex physical environments, to coordinate their activities over larger areas within shorter time intervals. In these systems humans and intelligent machines will, in close interaction, be able to reach their goals under

  12. An implementation of traffic light system using multi-hop Ad hoc networks

    KAUST Repository

    Ansari, Imran Shafique

    2009-08-01

    In ad hoc networks nodes cooperate with each other to form a temporary network without the aid of any centralized administration. No wired base station or infrastructure is supported, and each host communicates via radio packets. Each host must act as a router, since routes are mostly multi-hop, due to the limited power transmission set by government agencies, (e.g. the Federal Communication Commission (FCC), which is 1 Watt in Industrial Scientific and Medical (ISM) band. The natures of wireless mobile ad hoc networks depend on batteries or other fatiguing means for their energy. A limited energy capacity may be the most significant performance constraint. Therefore, radio resource and power management is an important issue of any wireless network. In this paper, a design for traffic light system employing ad hoc networks is proposed. The traffic light system runs automatically based on signals sent through a multi-hop ad hoc network of \\'n\\' number of nodes utilizing the Token Ring protocol, which is efficient for this application from the energy prospective. The experiment consists of a graphical user interface that simulates the traffic lights and laptops (which have wireless network adapters) are used to run the graphical user interface and are responsible for setting up the ad hoc network between them. The traffic light system has been implemented utilizing A Mesh Driver (which allows for more than one wireless device to be connected simultaneously) and Java-based client-server programs. © 2009 IEEE.

  13. Multimodal Interface Based on Novel HMI UI/UX for In‐Vehicle Infotainment System

    National Research Council Canada - National Science Library

    Kim, Jinwoo; Ryu, Jae Hong; Han, Tae Man

    2015-01-01

    We propose a novel HMI UI/UX for an in‐vehicle infotainment system. Our proposed HMI UI comprises multimodal interfaces that allow a driver to safely and intuitively manipulate an infotainment system while driving...

  14. The Application Programming Interface for the PVMEXEC Program and Associated Code Coupling System

    Energy Technology Data Exchange (ETDEWEB)

    Walter L. Weaver III

    2005-03-01

    This report describes the Application Programming Interface for the PVMEXEC program and the code coupling systems that it implements. The information in the report is intended for programmers wanting to add a new code into the coupling system.

  15. Human Machine Interface and Usability Issues: Exploring a Preliminary Mission Management System Evaluation Methodology

    National Research Council Canada - National Science Library

    Kardos, Monique

    2001-01-01

    ...) concept demonstrator test during June 2000. The questionnaire was designed to examine usability and interface issues relating to the design of the systems or tools, and to provide suggestions for future iterations of the system...

  16. Evaluating neural networks and artificial intelligence systems

    Science.gov (United States)

    Alberts, David S.

    1994-02-01

    Systems have no intrinsic value in and of themselves, but rather derive value from the contributions they make to the missions, decisions, and tasks they are intended to support. The estimation of the cost-effectiveness of systems is a prerequisite for rational planning, budgeting, and investment documents. Neural network and expert system applications, although similar in their incorporation of a significant amount of decision-making capability, differ from each other in ways that affect the manner in which they can be evaluated. Both these types of systems are, by definition, evolutionary systems, which also impacts their evaluation. This paper discusses key aspects of neural network and expert system applications and their impact on the evaluation process. A practical approach or methodology for evaluating a certain class of expert systems that are particularly difficult to measure using traditional evaluation approaches is presented.

  17. Microfluidic generation of droplet interface bilayer networks incorporating real-time size sorting in linear and non-linear configurations

    Science.gov (United States)

    Carreras, P.; Law, R. V.; Brooks, N.; Seddon, J. M.; Ces, O.

    2014-01-01

    In this study, a novel droplet based microfluidic method for the generation of different sized droplet interface bilayers is reported. A microfluidic platform was designed, which allows the generation and packing of picoliter lipid coated water droplets. Droplets were generated by hydrodynamic focusing coupled with selective transport along grooves according to their size. A trapping structure at the end of the groove and a fine control of the flow pressures allowed for the droplets to be successfully trapped and aligned on demand. This technology facilitates the fine control of droplet size production as well as the generation of extended networks from a variety of lipids including 1,2-diphytanoyl-sn-glycero-3-phosphocholine and 1,2-dioleoyl-sn-glycero-3-phosphocholine in linear and non-linear configurations, which is vital to the application of Droplet Interface Bilayers to biological network construction on-chip. PMID:25538807

  18. Intelligent Wireless Sensor Networks for System Health Monitoring

    Science.gov (United States)

    Alena, Rick

    2011-01-01

    Wireless sensor networks (WSN) based on the IEEE 802.15.4 Personal Area Network (PAN) standard are finding increasing use in the home automation and emerging smart energy markets. The network and application layers, based on the ZigBee 2007 Standard, provide a convenient framework for component-based software that supports customer solutions from multiple vendors. WSNs provide the inherent fault tolerance required for aerospace applications. The Discovery and Systems Health Group at NASA Ames Research Center has been developing WSN technology for use aboard aircraft and spacecraft for System Health Monitoring of structures and life support systems using funding from the NASA Engineering and Safety Center and Exploration Technology Development and Demonstration Program. This technology provides key advantages for low-power, low-cost ancillary sensing systems particularly across pressure interfaces and in areas where it is difficult to run wires. Intelligence for sensor networks could be defined as the capability of forming dynamic sensor networks, allowing high-level application software to identify and address any sensor that joined the network without the use of any centralized database defining the sensors characteristics. The IEEE 1451 Standard defines methods for the management of intelligent sensor systems and the IEEE 1451.4 section defines Transducer Electronic Datasheets (TEDS), which contain key information regarding the sensor characteristics such as name, description, serial number, calibration information and user information such as location within a vehicle. By locating the TEDS information on the wireless sensor itself and enabling access to this information base from the application software, the application can identify the sensor unambiguously and interpret and present the sensor data stream without reference to any other information. The application software is able to read the status of each sensor module, responding in real-time to changes of

  19. Protein interaction networks at the host–microbe interface in Diaphorina citri, the insect vector of the citrus greening pathogen

    Science.gov (United States)

    Chavez, J. D.; Johnson, R.; Hosseinzadeh, S.; Mahoney, J. E.; Mohr, J. P.; Robison, F.; Zhong, X.; Hall, D. G.; MacCoss, M.; Bruce, J.; Cilia, M.

    2017-01-01

    The Asian citrus psyllid (Diaphorina citri) is the insect vector responsible for the worldwide spread of ‘Candidatus Liberibacter asiaticus’ (CLas), the bacterial pathogen associated with citrus greening disease. Developmental changes in the insect vector impact pathogen transmission, such that D. citri transmission of CLas is more efficient when bacteria are acquired by nymphs when compared with adults. We hypothesize that expression changes in the D. citri immune system and commensal microbiota occur during development and regulate vector competency. In support of this hypothesis, more proteins, with greater fold changes, were differentially expressed in response to CLas in adults when compared with nymphs, including insect proteins involved in bacterial adhesion and immunity. Compared with nymphs, adult insects had a higher titre of CLas and the bacterial endosymbionts Wolbachia, Profftella and Carsonella. All Wolbachia and Profftella proteins differentially expressed between nymphs and adults are upregulated in adults, while most differentially expressed Carsonella proteins are upregulated in nymphs. Discovery of protein interaction networks has broad applicability to the study of host–microbe relationships. Using protein interaction reporter technology, a D. citri haemocyanin protein highly upregulated in response to CLas was found to physically interact with the CLas coenzyme A (CoA) biosynthesis enzyme phosphopantothenoylcysteine synthetase/decarboxylase. CLas pantothenate kinase, which catalyses the rate-limiting step of CoA biosynthesis, was found to interact with a D. citri myosin protein. Two Carsonella enzymes involved in histidine and tryptophan biosynthesis were found to physically interact with D. citri proteins. These co-evolved protein interaction networks at the host–microbe interface are highly specific targets for controlling the insect vector responsible for the spread of citrus greening. PMID:28386418

  20. User interface for a partially incompatible system software environment with non-ADP users

    Energy Technology Data Exchange (ETDEWEB)

    Loffman, R.S.

    1987-08-01

    Good user interfaces to computer systems and software applications are the result of combining an analysis of user needs with knowledge of interface design principles and techniques. This thesis reports on an interface for an environment: (a) that consists of users who are not computer science or data processing professionals; and (b) which is bound by predetermined software and hardware. The interface was designed which combined these considerations with user interface design principles. Current literature was investigated to establish a baseline of knowledge about user interface design. There are many techniques which can be used to implement a user interface, but all should have the same basic goal, which is to assist the user in the performance of a task. This can be accomplished by providing the user with consistent, well-structured interfaces which also provide flexibility to adapt to differences among users. The interface produced used menu selection and command language techniques to make two different operating system environments appear similar. Additional included features helped to address the needs of different users. The original goal was also to make the transition between the two systems transparent. This was not fully accomplished due to software and hardware limitations.

  1. Pinning control of complex networked systems synchronization, consensus and flocking of networked systems via pinning

    CERN Document Server

    Su, Housheng

    2013-01-01

    Synchronization, consensus and flocking are ubiquitous requirements in networked systems. Pinning Control of Complex Networked Systems investigates these requirements by using the pinning control strategy, which aims to control the whole dynamical network with huge numbers of nodes by imposing controllers for only a fraction of the nodes. As the direct control of every node in a dynamical network with huge numbers of nodes might be impossible or unnecessary, it’s then very important to use the pinning control strategy for the synchronization of complex dynamical networks. The research on pinning control strategy in consensus and flocking of multi-agent systems can not only help us to better understand the mechanisms of natural collective phenomena, but also benefit applications in mobile sensor/robot networks. This book offers a valuable resource for researchers and engineers working in the fields of control theory and control engineering.   Housheng Su is an Associate Professor at the Department of Contro...

  2. Dynamical systems on networks a tutorial

    CERN Document Server

    Porter, Mason A

    2016-01-01

    This volume is a tutorial for the study of dynamical systems on networks. It discusses both methodology and models, including spreading models for social and biological contagions. The authors focus especially on “simple” situations that are analytically tractable, because they are insightful and provide useful springboards for the study of more complicated scenarios. This tutorial, which also includes key pointers to the literature, should be helpful for junior and senior undergraduate students, graduate students, and researchers from mathematics, physics, and engineering who seek to study dynamical systems on networks but who may not have prior experience with graph theory or networks. Mason A. Porter is Professor of Nonlinear and Complex Systems at the Oxford Centre for Industrial and Applied Mathematics, Mathematical Institute, University of Oxford, UK. He is also a member of the CABDyN Complexity Centre and a Tutorial Fellow of Somerville College. James P. Gleeson is Professor of Industrial and Appli...

  3. TiD-Introducing and Benchmarking an Event-Delivery System for Brain-Computer Interfaces.

    Science.gov (United States)

    Breitwieser, Christian; Tavella, Michele; Schreuder, Martijn; Cincotti, Febo; Leeb, Robert; Muller-Putz, Gernot R

    2017-12-01

    In this paper, we present and analyze an event distribution system for brain-computer interfaces. Events are commonly used to mark and describe incidents during an experiment and are therefore critical for later data analysis or immediate real-time processing. The presented approach, called Tools for brain-computer interaction interface D (TiD), delivers messages in XML format via a buslike system using transmission control protocol connections or shared memory. A dedicated server dispatches TiD messages to distributed or local clients. The TiD message is designed to be flexible and contains time stamps for event synchronization, whereas events describe incidents, which occur during an experiment. TiD was tested extensively toward stability and latency. The effect of an occurring event jitter was analyzed and benchmarked on a reference implementation under different conditions as gigabit and 100-Mb Ethernet or Wi-Fi with a different number of event receivers. A 3-dB signal attenuation, which occurs when averaging jitter influenced trials aligned by events, is starting to become visible at around 1-2 kHz in the case of a gigabit connection. Mean event distribution times across operating systems are ranging from 0.3 to 0.5ms for a gigabit network connection for 106 events. Results for other environmental conditions are available in this paper. References already using TiD for event distribution are provided showing the applicability of TiD for event delivery with distributed or local clients.

  4. Network analysis of eight industrial symbiosis systems

    Science.gov (United States)

    Zhang, Yan; Zheng, Hongmei; Shi, Han; Yu, Xiangyi; Liu, Gengyuan; Su, Meirong; Li, Yating; Chai, Yingying

    2016-06-01

    Industrial symbiosis is the quintessential characteristic of an eco-industrial park. To divide parks into different types, previous studies mostly focused on qualitative judgments, and failed to use metrics to conduct quantitative research on the internal structural or functional characteristics of a park. To analyze a park's structural attributes, a range of metrics from network analysis have been applied, but few researchers have compared two or more symbioses using multiple metrics. In this study, we used two metrics (density and network degree centralization) to compare the degrees of completeness and dependence of eight diverse but representative industrial symbiosis networks. Through the combination of the two metrics, we divided the networks into three types: weak completeness, and two forms of strong completeness, namely "anchor tenant" mutualism and "equality-oriented" mutualism. The results showed that the networks with a weak degree of completeness were sparse and had few connections among nodes; for "anchor tenant" mutualism, the degree of completeness was relatively high, but the affiliated members were too dependent on core members; and the members in "equality-oriented" mutualism had equal roles, with diverse and flexible symbiotic paths. These results revealed some of the systems' internal structure and how different structures influenced the exchanges of materials, energy, and knowledge among members of a system, thereby providing insights into threats that may destabilize the network. Based on this analysis, we provide examples of the advantages and effectiveness of recent improvement projects in a typical Chinese eco-industrial park (Shandong Lubei).

  5. Strategic Investment in Protection in Networked Systems

    CERN Document Server

    Leduc, Matt V

    2015-01-01

    We study the incentives that agents have to invest in costly protection against cascading failures in networked systems. Applications include vaccination, computer security and airport security. Agents are connected through a network and can fail either intrinsically or as a result of the failure of a subset of their neighbors. We characterize the equilibrium based on an agent's failure probability and derive conditions under which equilibrium strategies are monotone in degree (i.e. in how connected an agent is on the network). We show that different kinds of applications (e.g. vaccination, airport security) lead to very different equilibrium patterns of investments in protection, with important welfare and risk implications. Our equilibrium concept is flexible enough to allow for comparative statics in terms of network properties and we show that it is also robust to the introduction of global externalities (e.g. price feedback, congestion).

  6. VSAT networks in the INTELSAT system

    Science.gov (United States)

    Albuquerque, Jose P. A.; Buchsbaum, Luiz M.; Meulman, Christopher B.; Rieger, Frederic; Zhu, Xiaobo

    1993-08-01

    This paper describes how VSAT networks currently operate in the INTELSAT system. Four classes of VSAT networks (data transaction; circuit-switched; data distribution; microterminals) are identified, and it is verified that all of them can operate with INTELSAT satellites. Most VSAT networks in operation on INTELSAT today operate in fractional transponder leases. Fractional transponder capacity estimates are presented for a wide range of scenarios and different INTELSAT satellite series. These estimates clearly show increasing bandwidth utilization efficiencies for newer generations of INTELSAT satellites. Provided that VSAT and hub sizes are appropriately selected, efficiencies are already significant with existing satellites. Two possible ways of increasing the utilization of satellite resources are examined in the paper: demand assignment multiple access (DAMA) and multiple channel-per-carrier (MCPC) techniques. The impact of using DAMA in circuit-switched VSAT networks is quantified.

  7. Human-system Interfaces to Automatic Systems: Review Guidance and Technical Basis

    Energy Technology Data Exchange (ETDEWEB)

    OHara, J.M.; Higgins, J.C.

    2010-01-31

    Automation has become ubiquitous in modern complex systems and commercial nuclear power plants are no exception. Beyond the control of plant functions and systems, automation is applied to a wide range of additional functions including monitoring and detection, situation assessment, response planning, response implementation, and interface management. Automation has become a 'team player' supporting plant personnel in nearly all aspects of plant operation. In light of the increasing use and importance of automation in new and future plants, guidance is needed to enable the NRC staff to conduct safety reviews of the human factors engineering (HFE) aspects of modern automation. The objective of the research described in this report was to develop guidance for reviewing the operator's interface with automation. We first developed a characterization of the important HFE aspects of automation based on how it is implemented in current systems. The characterization included five dimensions: Level of automation, function of automation, modes of automation, flexibility of allocation, and reliability of automation. Next, we reviewed literature pertaining to the effects of these aspects of automation on human performance and the design of human-system interfaces (HSIs) for automation. Then, we used the technical basis established by the literature to develop design review guidance. The guidance is divided into the following seven topics: Automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration. In addition, we identified insights into the automaton design process, operator training, and operations.

  8. Virtual reality interface devices in the reorganization of neural networks in the brain of patients with neurological diseases

    OpenAIRE

    Gatica-Rojas, Valeska; Méndez-Rebolledo, Guillermo

    2014-01-01

    Two key characteristics of all virtual reality applications are interaction and immersion. Systemic interaction is achieved through a variety of multisensory channels (hearing, sight, touch, and smell), permitting the user to interact with the virtual world in real time. Immersion is the degree to which a person can feel wrapped in the virtual world through a defined interface. Virtual reality interface devices such as the Nintendo® Wii and its peripheral nunchuks-balance board, head mounted ...

  9. Producing 3D neuronal networks in hydrogels for living bionic device interfaces.

    Science.gov (United States)

    Aregueta-Robles, Ulises A; Lim, Khoon S; Martens, Penny J; Lovell, Nigel H; Poole-Warren, Laura A; Green, Rylie

    2015-01-01

    Hydrogels hold significant promise for supporting cell based therapies in the field of bioelectrodes. It has been proposed that tissue engineering principles can be used to improve the integration of neural interfacing electrodes. Degradable hydrogels based on poly (vinyl alcohol) functionalised with tyramine (PVA-Tyr) have been shown to support covalent incorporation of non-modified tyrosine rich proteins within synthetic hydrogels. PVA-Tyr crosslinked with such proteins, were explored as a scaffold for supporting development of neural tissue in a three dimensional (3D) environment. In this study a model neural cell line (PC12) and glial accessory cell line, Schwann cell (SC) were encapsulated in PVA-Tyr crosslinked with gelatin and sericin. Specifically, this study aimed to examine the growth and function of SC and PC12 co-cultures when translated from a two dimensional (2D) environment to a 3D environment. PC12 differentiation was successfully promoted in both 2D and 3D at 25 days post-culture. SC encapsulated as a single cell line and in co-culture were able to produce both laminin and collagen-IV which are required to support neuronal development. Neurite outgrowth in the 3D environment was confirmed by immunocytochemical staining. PVA-Tyr/sericin/gelatin hydrogel showed mechanical properties similar to nerve tissue elastic modulus. It is suggested that the mechanical properties of the PVA-Tyr hydrogels with native protein components are providing with a compliant substrate that can be used to support the survival and differentiation of neural networks.

  10. [Comprehensive system integration and networking in operating rooms].

    Science.gov (United States)

    Feußner, H; Ostler, D; Kohn, N; Vogel, T; Wilhelm, D; Koller, S; Kranzfelder, M

    2016-12-01

    A comprehensive surveillance and control system integrating all devices and functions is a precondition for realization of the operating room of the future. Multiple proprietary integrated operation room systems are currently available with a central user interface; however, they only cover a relatively small part of all functionalities. Internationally, there are at least three different initiatives to promote a comprehensive systems integration and networking in the operating room: the Japanese smart cyber operating theater (SCOT), the American medical device plug-and-play interoperability program (MDPnP) and the German secure and dynamic networking in operating room and hospital (OR.NET) project supported by the Federal Ministry of Education and Research. Within the framework of the internationally advanced OR.NET project, prototype solution approaches were realized, which make short-term and mid-term comprehensive data retrieval systems probable. An active and even autonomous control of the medical devices by the surveillance and control system (closed loop) is expected only in the long run due to strict regulatory barriers.

  11. A Flexible System for Simulating Aeronautical Telecommunication Network

    Science.gov (United States)

    Maly, Kurt; Overstreet, C. M.; Andey, R.

    1998-01-01

    At Old Dominion University, we have built Aeronautical Telecommunication Network (ATN) Simulator with NASA being the fund provider. It provides a means to evaluate the impact of modified router scheduling algorithms on the network efficiency, to perform capacity studies on various network topologies and to monitor and study various aspects of ATN through graphical user interface (GUI). In this paper we describe briefly about the proposed ATN model and our abstraction of this model. Later we describe our simulator architecture highlighting some of the design specifications, scheduling algorithms and user interface. At the end, we have provided the results of performance studies on this simulator.

  12. Investigation of network-based information system model

    Energy Technology Data Exchange (ETDEWEB)

    Konrad, A.M.; Perez, M.; Rivera, J.; Rodriguez, Y.; Durst, M.J.; Merrill, D.W.; Holmes, H.H.

    1996-09-01

    The objective of the DOE-LBNL summer student research program in computer and information sciences focused on investigating database- based http-based information architectures, and implementation of a prototype using DOE`s Comprehensive Epidemiologic Data Resource (CEDR) metadata or Epidemiology Guide content. We were successful in identifying the components of such an information system, and appropriate configuration given the requirements, and in implementing a prototype. This work comprised investigation of various information systems architectures or variants, evaluation and selection of various tools, products, and packages, preparation of databases, database content, output formats, and graphical (World Wide Web- compatible) interfaces. We successfully prepared and demonstrated network access to content from both the CEDR structured documentation and from the DOD Epidemiology Guides (site archive records).

  13. Social Network Supported Process Recommender System

    Science.gov (United States)

    Ye, Yanming; Yin, Jianwei; Xu, Yueshen

    2014-01-01

    Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced. PMID:24672309

  14. Restaurant Management System Over Private Network

    Directory of Open Access Journals (Sweden)

    Amanat Dhillon

    2017-08-01

    Full Text Available Restaurant Management System over Private Network is an automated business environment which allows restaurants to reduce operational costs increase efficiency of business improve customer satisfaction cut down labour costs decrease order processing time and provide better Quality-of-ServiceQ-S. This system manages a digital menu allowing the customers to place orders easily. Authentication fields for employees enable better administration of the restaurant. The whole restaurant is integrated into one private network thereby improving security and eliminating the need for a constant internet connection.

  15. Dynamics of the water hydrogen bond network at ionic, nonionic, and hydrophobic interfaces in nanopores and reverse micelles.

    Science.gov (United States)

    Rosenfeld, Daniel E; Schmuttenmaer, Charles A

    2011-02-10

    The effects of water confinement on hydrogen bond dynamics and hydrogen bond exchange have been analyzed by molecular dynamics simulations for a series of different sizes of spherical nanopores of ionic, nonionic, and hydrophobic interfaces. We have calculated translational diffusion residence times, orientational decay time constants, the infrared spectra, correlation functions describing the hydrogen bond network, the hydrogen bond exchange time and rate constant, and ensemble averages of the hydrogen bond exchange reaction coordinate. We focus on the interfacial layer and bulklike interior of these small water containing nanostructures. Our results indicate a universal slowdown in rotational and hydrogen bond dynamics at the interface relative to bulk water. The interiors of nanopores with highly charged interfaces undergo qualitatively different dynamics than those in other nanopores. The rotational jump hydrogen bond exchange mechanism is shown to be robust and universal, even for this variety of interfaces. The implications of these results are discussed in terms of the role of confinement vs interface structure on water dynamics in nanopores.

  16. Two-dimensional trace-normed canonical systems of differential equations and selfadjoint interface conditions

    NARCIS (Netherlands)

    de Snoo, H; Winkler, Henrik

    The class of two-dimensional trace-normed canonical systems of differential equations on R is considered with selfadjoint interface conditions at 0. If one or both of the intervals around 0 are H-indivisible the interface conditions which give rise to selfadjoint relations (multi-valued operators)

  17. A simple low cost speed log interface for oceanographic data acquisition system

    Digital Repository Service at National Institute of Oceanography (India)

    Khedekar, V.D.; Phadte, G.M.

    A speed log interface is designed with parallel Binary Coded Decimal output. This design was mainly required for the oceanographic data acquisition system as an interface between the speed log and the computer. However, this can also be used as a...

  18. Preliminary AFBITS Network Control System

    Science.gov (United States)

    1975-06-01

    divided into time slots. This provides essentially simultaneous digital data service to a large number of individual subscribers. In a normal...model telephone switch, modern exchanges such as those developed by the Bell System or the independent Telco suppliers give a good indication of

  19. Evolution of Linux operating system network

    Science.gov (United States)

    Xiao, Guanping; Zheng, Zheng; Wang, Haoqin

    2017-01-01

    Linux operating system (LOS) is a sophisticated man-made system and one of the most ubiquitous operating systems. However, there is little research on the structure and functionality evolution of LOS from the prospective of networks. In this paper, we investigate the evolution of the LOS network. 62 major releases of LOS ranging from versions 1.0 to 4.1 are modeled as directed networks in which functions are denoted by nodes and function calls are denoted by edges. It is found that the size of the LOS network grows almost linearly, while clustering coefficient monotonically decays. The degree distributions are almost the same: the out-degree follows an exponential distribution while both in-degree and undirected degree follow power-law distributions. We further explore the functionality evolution of the LOS network. It is observed that the evolution of functional modules is shown as a sequence of seven events (changes) succeeding each other, including continuing, growth, contraction, birth, splitting, death and merging events. By means of a statistical analysis of these events in the top 4 largest components (i.e., arch, drivers, fs and net), it is shown that continuing, growth and contraction events occupy more than 95% events. Our work exemplifies a better understanding and describing of the dynamics of LOS evolution.

  20. Developing a Prototype ALHAT Human System Interface for Landing

    Science.gov (United States)

    Hirsh, Robert L.; Chua, Zarrin K.; Heino, Todd A.; Strahan, Al; Major, Laura; Duda, Kevin

    2011-01-01

    The goal of the Autonomous Landing and Hazard Avoidance Technology (ALHAT) project is to safely execute a precision landing anytime/anywhere on the moon. This means the system must operate in any lighting conditions, operate in the presence of any thruster generated regolith clouds, and operate without the help of redeployed navigational aids or prepared landing site at the landing site. In order to reach this ambitious goal, computer aided technologies such as ALHAT will be needed in order to permit these landings to be done safely. Although there will be advanced autonomous capabilities onboard future landers, humans will still be involved (either onboard as astronauts or remotely from mission control) in any mission to the moon or other planetary body. Because many time critical decisions must be made quickly and effectively during the landing sequence, the Descent and Landing displays need to be designed to be as effective as possible at presenting the pertinent information to the operator, and allow the operators decisions to be implemented as quickly as possible. The ALHAT project has established the Human System Interface (HSI) team to lead in the development of these displays and to study the best way to provide operators enhanced situational awareness during landing activities. These displays are prototypes that were developed based on multiple design and feedback sessions with the astronaut office at NASA/ Johnson Space Center. By working with the astronauts in a series of plan/build/evaluate cycles, the HSI team has obtained astronaut feedback from the very beginning of the design process. In addition to developing prototype displays, the HSI team has also worked to provide realistic lunar terrain (and shading) to simulate a "out the window" view that can be adjusted to various lighting conditions (based on a desired date/time) to allow the same terrain to be viewed under varying lighting terrain. This capability will be critical to determining the

  1. Social networks as embedded complex adaptive systems.

    Science.gov (United States)

    Benham-Hutchins, Marge; Clancy, Thomas R

    2010-09-01

    As systems evolve over time, their natural tendency is to become increasingly more complex. Studies in the field of complex systems have generated new perspectives on management in social organizations such as hospitals. Much of this research appears as a natural extension of the cross-disciplinary field of systems theory. This is the 15th in a series of articles applying complex systems science to the traditional management concepts of planning, organizing, directing, coordinating, and controlling. In this article, the authors discuss healthcare social networks as a hierarchy of embedded complex adaptive systems. The authors further examine the use of social network analysis tools as a means to understand complex communication patterns and reduce medical errors.

  2. Louisiana coastal GIS network: Graphical user interface for access to spatial data

    Science.gov (United States)

    Hiland, Matteson; McBride, Randolph A.; Davis, Donald; Braud, Dewitt; Streiffer, Henry; Jones, Farrell; Lewis, Anthony; Williams, S.

    1991-01-01

    Louisiana's coastal wetlands support a large percentage of the nation's seafood and fur industries, vast deposits of oil and natural gas, habitat for thousands of species of plants and animals, winter nesting grounds and migratory paths for numerous waterfowl, and many recreational resources enjoyed by residents and tourists. Louisiana's wetlands also have the highest rates of coastal erosion and wetland loss in the nation. While numerous studies across many disciplines have been conducted on both local and regional scales, no complete inventory exists for this information. The Louisiana Coastal Geographic Information System Network (LCGISN) is currently being developed to facilitate access to existing data for coastal zone planners, managers, and researchers. The Louisiana Geological Survey (LGS), in cooperation with the LSU Department of Geography and Anthropology, the Computer Aided Design and Geographic Information Systems Research Laboratory (CADGIS), and others, is pursuing this project under the terms of a cooperative agreement with the U.S. Geological Survey. LCGISN is an automated system for searching and retrieving geographic, cartographic, and bibliographic data. By linking original programming with an existing GIS software package and an industry standard relational database management system, LCGISN will provide the capability for users to search for data references by interactively defining the area of interest on a displayed map/image reference background. Several agencies will be networked to provide easy access to a wide variety of information. LCGISN, with its headquarters at LGS, will serve as the central node on the network, providing data format conversions, projection and datum transformations, and storage of several of the most commonly used data sets. Thematic mapper data, USGS 7.5-minute quadrangle map boundaries, political and legal boundaries, major transportation routes, and other digital data will provide a base map to aid the user in

  3. The Deep Space Network Advanced Systems Program

    Science.gov (United States)

    Davarian, Faramaz

    2010-01-01

    The deep space network (DSN)--with its three complexes in Goldstone, California, Madrid, Spain, and Canberra, Australia--provides the resources to track and communicate with planetary and deep space missions. Each complex consists of an array of capabilities for tracking probes almost anywhere in the solar system. A number of innovative hardware, software and procedural tools are used for day-to-day operations at DSN complexes as well as at the network control at the Jet Propulsion Laboratory (JPL). Systems and technologies employed by the network include large-aperture antennas (34-m and 70-m), cryogenically cooled receivers, high-power transmitters, stable frequency and timing distribution assemblies, modulation and coding schemes, spacecraft transponders, radiometric tracking techniques, etc. The DSN operates at multiple frequencies, including the 2-GHz band, the 7/8-GHz band, and the 32/34-GHz band.

  4. Functional correlation of bacterial LuxS with their quaternary associations: interface analysis of the structure networks

    Directory of Open Access Journals (Sweden)

    Vishveshwara Saraswathi

    2009-02-01

    Full Text Available Abstract Background The genome of a wide variety of prokaryotes contains the luxS gene homologue, which encodes for the protein S-ribosylhomocysteinelyase (LuxS. This protein is responsible for the production of the quorum sensing molecule, AI-2 and has been implicated in a variety of functions such as flagellar motility, metabolic regulation, toxin production and even in pathogenicity. A high structural similarity is present in the LuxS structures determined from a few species. In this study, we have modelled the structures from several other species and have investigated their dimer interfaces. We have attempted to correlate the interface features of LuxS with the phenotypic nature of the organisms. Results The protein structure networks (PSN are constructed and graph theoretical analysis is performed on the structures obtained from X-ray crystallography and on the modelled ones. The interfaces, which are known to contain the active site, are characterized from the PSNs of these homodimeric proteins. The key features presented by the protein interfaces are investigated for the classification of the proteins in relation to their function. From our analysis, structural interface motifs are identified for each class in our dataset, which showed distinctly different pattern at the interface of LuxS for the probiotics and some extremophiles. Our analysis also reveals potential sites of mutation and geometric patterns at the interface that was not evident from conventional sequence alignment studies. Conclusion The structure network approach employed in this study for the analysis of dimeric interfaces in LuxS has brought out certain structural details at the side-chain interaction level, which were elusive from the conventional structure comparison methods. The results from this study provide a better understanding of the relation between the luxS gene and its functional role in the prokaryotes. This study also makes it possible to explore the

  5. Embedded systems handbook networked embedded systems

    CERN Document Server

    Zurawski, Richard

    2009-01-01

    Considered a standard industry resource, the Embedded Systems Handbook provided researchers and technicians with the authoritative information needed to launch a wealth of diverse applications, including those in automotive electronics, industrial automated systems, and building automation and control. Now a new resource is required to report on current developments and provide a technical reference for those looking to move the field forward yet again. Divided into two volumes to accommodate this growth, the Embedded Systems Handbook, Second Edition presents a comprehensive view on this area

  6. A Python Interface for the Dakota Iterative Systems Analysis Toolkit

    Science.gov (United States)

    Piper, M.; Hutton, E.; Syvitski, J. P.

    2016-12-01

    Uncertainty quantification is required to improve the accuracy, reliability, and accountability of Earth science models. Dakota is a software toolkit, developed at Sandia National Laboratories, that provides an interface between models and a library of analysis methods, including support for sensitivity analysis, uncertainty quantification, optimization, and calibration techniques. Dakota is a powerful tool, but its learning curve is steep: the user not only must understand the structure and syntax of the Dakota input file, but also must develop intermediate code, called an analysis driver, that allows Dakota to run a model. The CSDMS Dakota interface (CDI) is a Python package that wraps and extends Dakota's user interface. It simplifies the process of configuring and running a Dakota experiment. A user can program to the CDI, allowing a Dakota experiment to be scripted. The CDI creates Dakota input files and provides a generic analysis driver. Any model written in Python that exposes a Basic Model Interface (BMI), as well as any model componentized in the CSDMS modeling framework, automatically works with the CDI. The CDI has a plugin architecture, so models written in other languages, or those that don't expose a BMI, can be accessed by the CDI by programmatically extending a template; an example is provided in the CDI distribution. Currently, six Dakota analysis methods have been implemented for examples from the much larger Dakota library. To demonstrate the CDI, we performed an uncertainty quantification experiment with the HydroTrend hydrological water balance and transport model. In the experiment, we evaluated the response of long-term suspended sediment load at the river mouth (Qs) to uncertainty in two input parameters, annual mean temperature (T) and precipitation (P), over a series of 100-year runs, using the polynomial chaos method. Through Dakota, we calculated moments, local and global (Sobol') sensitivity indices, and probability density and

  7. Hybrid brain-computer interface for biomedical cyber-physical system application using wireless embedded EEG systems.

    Science.gov (United States)

    Chai, Rifai; Naik, Ganesh R; Ling, Sai Ho; Nguyen, Hung T

    2017-01-07

    One of the key challenges of the biomedical cyber-physical system is to combine cognitive neuroscience with the integration of physical systems to assist people with disabilities. Electroencephalography (EEG) has been explored as a non-invasive method of providing assistive technology by using brain electrical signals. This paper presents a unique prototype of a hybrid brain computer interface (BCI) which senses a combination classification of mental task, steady state visual evoked potential (SSVEP) and eyes closed detection using only two EEG channels. In addition, a microcontroller based head-mounted battery-operated wireless EEG sensor combined with a separate embedded system is used to enhance portability, convenience and cost effectiveness. This experiment has been conducted with five healthy participants and five patients with tetraplegia. Generally, the results show comparable classification accuracies between healthy subjects and tetraplegia patients. For the offline artificial neural network classification for the target group of patients with tetraplegia, the hybrid BCI system combines three mental tasks, three SSVEP frequencies and eyes closed, with average classification accuracy at 74% and average information transfer rate (ITR) of the system of 27 bits/min. For the real-time testing of the intentional signal on patients with tetraplegia, the average success rate of detection is 70% and the speed of detection varies from 2 to 4 s.

  8. Intelligent Systems and Advanced User Interfaces for Design, Operation, and Maintenance of Command Management Systems

    Science.gov (United States)

    Mitchell, Christine M.

    1998-01-01

    Historically Command Management Systems (CMS) have been large, expensive, spacecraft-specific software systems that were costly to build, operate, and maintain. Current and emerging hardware, software, and user interface technologies may offer an opportunity to facilitate the initial formulation and design of a spacecraft-specific CMS as well as a to develop a more generic or a set of core components for CMS systems. Current MOC (mission operations center) hardware and software include Unix workstations, the C/C++ and Java programming languages, and X and Java window interfaces representations. This configuration provides the power and flexibility to support sophisticated systems and intelligent user interfaces that exploit state-of-the-art technologies in human-machine systems engineering, decision making, artificial intelligence, and software engineering. One of the goals of this research is to explore the extent to which technologies developed in the research laboratory can be productively applied in a complex system such as spacecraft command management. Initial examination of some of the issues in CMS design and operation suggests that application of technologies such as intelligent planning, case-based reasoning, design and analysis tools from a human-machine systems engineering point of view (e.g., operator and designer models) and human-computer interaction tools, (e.g., graphics, visualization, and animation), may provide significant savings in the design, operation, and maintenance of a spacecraft-specific CMS as well as continuity for CMS design and development across spacecraft with varying needs. The savings in this case is in software reuse at all stages of the software engineering process.

  9. Advances in network systems architectures, security, and applications

    CERN Document Server

    Awad, Ali; Furtak, Janusz; Legierski, Jarosław

    2017-01-01

    This book provides the reader with a comprehensive selection of cutting–edge algorithms, technologies, and applications. The volume offers new insights into a range of fundamentally important topics in network architectures, network security, and network applications. It serves as a reference for researchers and practitioners by featuring research contributions exemplifying research done in the field of network systems. In addition, the book highlights several key topics in both theoretical and practical aspects of networking. These include wireless sensor networks, performance of TCP connections in mobile networks, photonic data transport networks, security policies, credentials management, data encryption for network transmission, risk management, live TV services, and multicore energy harvesting in distributed systems. .

  10. On-line Configuration of Network Emulator for Intelligent Energy System Testbed Applications

    DEFF Research Database (Denmark)

    Kemal, Mohammed Seifu; Iov, Florin; Olsen, Rasmus Løvenstein

    2015-01-01

    interface for visualizing, configuring and monitoring of the emulated scenarios and a network socket linking the graphic server and network emulation server on-line. Specifically, our focus area is to build a model that gives us ability to look at some of the challenges on implementing inter...... a mechanism for on-line configuration and monitoring of heterogeneous communication technologies implemented at smart energy system testbed of Aal-borg university. It proposes a model with three main components, a network emulator used to emulate the communication scenarios using KauNet, graphical user...

  11. A meta-analysis of human-system interfaces in unmanned aerial vehicle (UAV) swarm management.

    Science.gov (United States)

    Hocraffer, Amy; Nam, Chang S

    2017-01-01

    A meta-analysis was conducted to systematically evaluate the current state of research on human-system interfaces for users controlling semi-autonomous swarms composed of groups of drones or unmanned aerial vehicles (UAVs). UAV swarms pose several human factors challenges, such as high cognitive demands, non-intuitive behavior, and serious consequences for errors. This article presents findings from a meta-analysis of 27 UAV swarm management papers focused on the human-system interface and human factors concerns, providing an overview of the advantages, challenges, and limitations of current UAV management interfaces, as well as information on how these interfaces are currently evaluated. In general allowing user and mission-specific customization to user interfaces and raising the swarm's level of autonomy to reduce operator cognitive workload are beneficial and improve situation awareness (SA). It is clear more research is needed in this rapidly evolving field. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Ion Transfer Voltammetry Associated with Two Polarizable Interfaces Within Water and Moderately Hydrophobic Ionic Liquid Systems

    DEFF Research Database (Denmark)

    Gan, Shiyu; Zhou, Min; Zhang, Jingdong

    2013-01-01

    An electrochemical system composed of two polarizable interfaces (the metallic electrode|water and water|ionic liquid interfaces), namely two‐polarized‐interface (TPI) technique, has been proposed to explore the ion transfer processes between water and moderately hydrophobic ionic liquids (W......|mIL), typically 1‐octyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (C8mimC1C1N) and 1‐hexyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (C6mimC1C1N). Within the classic four‐electrode system, it is not likely that the ion transfer information at the W|mIL interface can be obtained due...... to an extremely narrow polarized potential window (ppw) caused by these moderately hydrophobic ionic components. In this article, we show that TPI technique has virtually eliminated the ppw limitation based on a controlling step of concentration polarization at the electrode|water interface. With the aid...

  13. Controllable Buoys and Networked Buoy Systems

    Science.gov (United States)

    Davoodi, Faranak (Inventor); Davoudi, Farhooman (Inventor)

    2017-01-01

    Buoyant sensor networks are described, comprising floating buoys with sensors and energy harvesting capabilities. The buoys can control their buoyancy and motion, and can organize communication in a distributed fashion. Some buoys may have tethered underwater vehicles with a smart spooling system that allows the vehicles to dive deep underwater while remaining in communication and connection with the buoys.

  14. Comprehensive information system development and networking in ...

    African Journals Online (AJOL)

    Background/Aim: Hospital Information System(HIS) and Networking development is now the most important technology that must be embraced by all hospitals and clinics these days. Patients sometimes used to face problems in order to have quick and good services in the hospitals, often due to delay in searching for the ...

  15. Social network based dynamic transit service through the OMITS system.

    Science.gov (United States)

    2014-02-01

    The Open Mode Integrated Transportation System (OMITS) forms a sustainable information infrastructure for communication within and between the mobile/Internet network, the roadway : network, and the users social network. It manipulates the speed g...

  16. Network and adaptive system of systems modeling and analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, Craig R.; Campbell, James E. Dr. (.; .); Anderson, Dennis James; Eddy, John P.

    2007-05-01

    This report documents the results of an LDRD program entitled ''Network and Adaptive System of Systems Modeling and Analysis'' that was conducted during FY 2005 and FY 2006. The purpose of this study was to determine and implement ways to incorporate network communications modeling into existing System of Systems (SoS) modeling capabilities. Current SoS modeling, particularly for the Future Combat Systems (FCS) program, is conducted under the assumption that communication between the various systems is always possible and occurs instantaneously. A more realistic representation of these communications allows for better, more accurate simulation results. The current approach to meeting this objective has been to use existing capabilities to model network hardware reliability and adding capabilities to use that information to model the impact on the sustainment supply chain and operational availability.

  17. Design Criteria For Networked Image Analysis System

    Science.gov (United States)

    Reader, Cliff; Nitteberg, Alan

    1982-01-01

    Image systems design is currently undergoing a metamorphosis from the conventional computing systems of the past into a new generation of special purpose designs. This change is motivated by several factors, notably among which is the increased opportunity for high performance with low cost offered by advances in semiconductor technology. Another key issue is a maturing in understanding of problems and the applicability of digital processing techniques. These factors allow the design of cost-effective systems that are functionally dedicated to specific applications and used in a utilitarian fashion. Following an overview of the above stated issues, the paper presents a top-down approach to the design of networked image analysis systems. The requirements for such a system are presented, with orientation toward the hospital environment. The three main areas are image data base management, viewing of image data and image data processing. This is followed by a survey of the current state of the art, covering image display systems, data base techniques, communications networks and software systems control. The paper concludes with a description of the functional subystems and architectural framework for networked image analysis in a production environment.

  18. Power Electronic Systems for Switched Reluctance Generator based Wind Farms and DC Networks

    DEFF Research Database (Denmark)

    Park, Kiwoo

    . Under these circumstances, research on dc network connection with a novel wind power generator system is presented in this thesis, which mainly consists of two major parts: control of a Switched Reluctance Generator (SRG) system and development of dc-dc converters for a dc network system in a wind farm...... components into the torque reference to compensate the ripples in the actual output torque. The effectiveness and resulting improvement in the performance of both the proposed speed controller and torque minimization technique are demonstrated by simulation results. The modern power electronic interfaces...

  19. System Interface for an Integrated Intelligent Safety System (ISS for Vehicle Applications

    Directory of Open Access Journals (Sweden)

    Mahammad A. Hannan

    2010-01-01

    Full Text Available This paper deals with the interface-relevant activity of a vehicle integrated intelligent safety system (ISS that includes an airbag deployment decision system (ADDS and a tire pressure monitoring system (TPMS. A program is developed in LabWindows/CVI, using C for prototype implementation. The prototype is primarily concerned with the interconnection between hardware objects such as a load cell, web camera, accelerometer, TPM tire module and receiver module, DAQ card, CPU card and a touch screen. Several safety subsystems, including image processing, weight sensing and crash detection systems, are integrated, and their outputs are combined to yield intelligent decisions regarding airbag deployment. The integrated safety system also monitors tire pressure and temperature. Testing and experimentation with this ISS suggests that the system is unique, robust, intelligent, and appropriate for in-vehicle applications.

  20. Fiber-optic subscriber system based on passive optical network architecture

    Energy Technology Data Exchange (ETDEWEB)

    Kitazawa, M.; Yamazaki, M.; Himi, S. (Hitachi, Ltd., Tokyo (Japan))

    1994-04-01

    The subscriber line terminal and optical network unit were developed for the fiber-optic subscriber system based on a passive double star (PDS) optical network architecture which allows narrowband ISDN (integrated services digital network) services and video image transmission. Various LSIs were developed to implement the major system functions such as fast bit-synchronization, time division multiple access control, subscriber multiplexing/demultiplexing and 16-channel multiprocessing. For the optical interface module, the wavelength division multiplexing chip was hermetically sealed together with laser diode and photodiode chips by adopting high-silica based optical-waveguide technology to reduce a system dimension. The PDS fiber-optic subscriber system is useful for construction of economic optical subscriber networks because it allows multiple subscribers to share a single optical transmission line and a central equipment unit through a star coupler. 4 refs., 10 figs., 1 tab.

  1. Locomotive monitoring system using wireless sensor networks

    CSIR Research Space (South Africa)

    Croucamp, PL

    2014-07-01

    Full Text Available Conference on Industrial Informatics (INDIN), 27-30 July 2014 Locomotive monitoring system using wireless sensor networks P. L. Croucamp1, S. Rimer1 and C. Kruger2 1Department of Electrical and Electronic Engineering University of Johannesburg... Johannesburg, South Africa Email: suvendic@uj.ac.za 2Advanced Sensor Networks, Meraka. CSIR Pretoria, South Africa Email: ckruger1@csir.co.za Abstract Theft of cables used for powering a locomotive not only stops the train from functioning but also...

  2. On Small-Signal Stability of Wind Power System with Full-Load Converter Interfaced Wind Turbines

    DEFF Research Database (Denmark)

    Knüppel, Thyge; Akhmatov, Vladislav; Nielsen, Jørgen Nygård

    2010-01-01

    Small-signal stability analysis of power system oscillations is a well established field within power system analysis, but not much attention has yet been paid to systems with a high penetration of wind turbines and with large wind power plants. In this paper an analysis is presented which assess...... the impact of full-load converter interfaced wind turbines on power system small-signal stability. The study is based on a 7 generator network with lightly damped inter-area modes. A detailed wind turbine model with all grid relevant control functions is used in the study. Furthermore is the wind power plant...... (WPP) equipped with a WPP voltage controller and comparisons are presented. The models of wind turbine and WPP voltage controller are kindly provided by Siemens Wind Power A/S for this work. The study is based on modal analysis which are complemented with simulations on the nonlinear system....

  3. A Knowledge Management System Using Bayesian Networks

    Science.gov (United States)

    Ribino, Patrizia; Oliveri, Antonio; Re, Giuseppe Lo; Gaglio, Salvatore

    In today's world, decision support and knowledge management processes are strategic and interdependent activities in many organizations. The companies' interest on a correct knowledge management is grown, more than interest on the mere knowledge itself. This paper proposes a Knowledge Management System based on Bayesian networks. The system has been tested collecting and using data coming from projects and processes typical of ICT companies, and provides a Document Management System and a Decision Support system to share documents and to plan how to best use firms' knowledge.

  4. Wireless Sensor Network Based Smart Parking System

    Directory of Open Access Journals (Sweden)

    Jeffrey JOSEPH

    2014-01-01

    Full Text Available Ambient Intelligence is a vision in which various devices come together and process information from multiple sources in order to exert control on the physical environment. In addition to computation and control, communication plays a crucial role in the overall functionality of such a system. Wireless Sensor Networks are one such class of networks, which meet these criteria. These networks consist of spatially distributed sensor motes which work in a co-operative manner to sense and control the environment. In this work, an implementation of an energy-efficient and cost-effective, wireless sensor networks based vehicle parking system for a multi-floor indoor parking facility has been introduced. The system monitors the availability of free parking slots and guides the vehicle to the nearest free slot. The amount of time the vehicle has been parked is monitored for billing purposes. The status of the motes (dead/alive is also recorded. Information like slot allocated, directions to the slot and billing data is sent as a message to customer’s mobile phones. This paper extends our previous work 1 with the development of a low cost sensor mote, about one tenth the cost of a commercially available mote, keeping in mind the price sensitive markets of the developing countries.

  5. Reaction networks and kinetics of biochemical systems.

    Science.gov (United States)

    Arceo, Carlene Perpetua P; Jose, Editha C; Lao, Angelyn R; Mendoza, Eduardo R

    2017-01-01

    This paper further develops the connection between Chemical Reaction Network Theory (CRNT) and Biochemical Systems Theory (BST) that we recently introduced [1]. We first use algebraic properties of kinetic sets to study the set of complex factorizable kinetics CFK(N) on a CRN, which shares many characteristics with its subset of mass action kinetics. In particular, we extend the Theorem of Feinberg-Horn [9] on the coincidence of the kinetic and stoichiometric subsets of a mass action system to CF kinetics, using the concept of span surjectivity. We also introduce the branching type of a network, which determines the availability of kinetics on it and allows us to characterize the networks for which all kinetics are complex factorizable: A "Kinetics Landscape" provides an overview of kinetics sets, their algebraic properties and containment relationships. We then apply our results and those (of other CRNT researchers) reviewed in [1] to fifteen BST models of complex biological systems and discover novel network and kinetic properties that so far have not been widely studied in CRNT. In our view, these findings show an important benefit of connecting CRNT and BST modeling efforts. Copyright © 2016 Elsevier Inc. All rights reserved.

  6. A Formal Approach to User Interface Design using Hybrid System Theory Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Optimal Synthesis Inc.(OSI) proposes to develop an aiding tool for user interface design that is based on mathematical formalism of hybrid system theory. The...

  7. Advanced User Interface Design and Advanced Internetting for Tactical Security Systems

    National Research Council Canada - National Science Library

    Murray, S

    1998-01-01

    ...), at the request of the U.S. Army Product Manager - Physical Security Equipment, initiated two exploratory development projects at SPAWAR Systems Center, San Diego, to develop an Advanced User Interface for Tactical Security (AITS...

  8. FELIX: A high-throughput network approach for interfacing to front end electronics for ATLAS upgrades

    CERN Document Server

    Anderson, John Thomas; The ATLAS collaboration; Boterenbrood, Hendrik; Chen, Hucheng; Chen, Kai; Drake, Gary; Francis, David; Gorini, Benedetto; Lanni, Francesco; Lehmann Miotto, Giovanna; Levinson, Lorne; Narevicius, Julia; Christian Plessl; Roich, Alexander; Schreuder, Frans Philip; Schumacher, Jorn; Vandelli, Wainer; Vermeulen, Jos; Zhang, Jinlong

    2015-01-01

    The ATLAS experiment at CERN is planning full deployment of a new unified link technology for connecting detector front end electronics on the timescale of the LHC Run 4 (2025). It is estimated that roughly 8000 GBT (GigaBit Transceiver) links, with transfer rates probably up to 9.6 Gbps, will replace existing links used for readout, detector control and distribution of timing and trigger information. In particular the links used for readout are often detector-specific. Already in Run 3 this technology will be deployed in conjunction with new muon detectors, additional muon first-level triggering electronics and new on-detector and off-detector liquid argon calorimeter electronics to be used for first level triggering. A total of roughly 2000 GBT links or GBT-like links (for connecting to off-detector trigger electronics) will be needed. A new class of devices will need to be developed to interface many GBT links to the rest of the trigger, data-acquisition and detector control systems. In this paper we prese...

  9. Multiphase flow in microfluidic systems --control and applications of droplets and interfaces.

    Science.gov (United States)

    Shui, Lingling; Eijkel, Jan C T; van den Berg, Albert

    2007-05-31

    Micro- and nanotechnology can provide us with many tools for the production, study and detection of colloidal and interfacial systems. In multiphase flow in micro- and nanochannels several immiscible fluids will be separated from each other by flexible fluidic interfaces. The multiphase coexistence and the small-volume confinement provide many attractive characteristics. Multiphase flow in microfluidic systems shows a complicated behavior but has many practical uses compared to a single-phase flow. In this paper, we discuss the methods of controlling multiphase flow to generate either micro- or nano-droplets (or bubbles) or stable stratified interfaces between fluidic phases. Furthermore, applications of the droplets and interfaces in microchannels are summarized.

  10. Interface Anywhere: Development of a Voice and Gesture System for Spaceflight Operations

    Science.gov (United States)

    Thompson, Shelby; Haddock, Maxwell; Overland, David

    2013-01-01

    The Interface Anywhere Project was funded through Innovation Charge Account (ICA) at NASA JSC in the Fall of 2012. The project was collaboration between human factors and engineering to explore the possibility of designing an interface to control basic habitat operations through gesture and voice control; (a) Current interfaces require the users to be physically near an input device in order to interact with the system; and (b) By using voice and gesture commands, the user is able to interact with the system anywhere they want within the work environment.

  11. Situational Awareness of Network System Roles (SANSR)

    Energy Technology Data Exchange (ETDEWEB)

    Huffer, Kelly M [ORNL; Reed, Joel W [ORNL

    2017-01-01

    In a large enterprise it is difficult for cyber security analysts to know what services and roles every machine on the network is performing (e.g., file server, domain name server, email server). Using network flow data, already collected by most enterprises, we developed a proof-of-concept tool that discovers the roles of a system using both clustering and categorization techniques. The tool's role information would allow cyber analysts to detect consequential changes in the network, initiate incident response plans, and optimize their security posture. The results of this proof-of-concept tool proved to be quite accurate on three real data sets. We will present the algorithms used in the tool, describe the results of preliminary testing, provide visualizations of the results, and discuss areas for future work. Without this kind of situational awareness, cyber analysts cannot quickly diagnose an attack or prioritize remedial actions.

  12. Architecture for networked electronic patient record systems.

    Science.gov (United States)

    Takeda, H; Matsumura, Y; Kuwata, S; Nakano, H; Sakamoto, N; Yamamoto, R

    2000-11-01

    There have been two major approaches to the development of networked electronic patient record (EPR) architecture. One uses object-oriented methodologies for constructing the model, which include the GEHR project, Synapses, HL7 RIM and so on. The second approach uses document-oriented methodologies, as applied in examples of HL7 PRA. It is practically beneficial to take the advantages of both approaches and to add solution technologies for network security such as PKI. In recognition of the similarity with electronic commerce, a certificate authority as a trusted third party will be organised for establishing networked EPR system. This paper describes a Japanese functional model that has been developed, and proposes a document-object-oriented architecture, which is-compared with other existing models.

  13. Gas Main Sensor and Communications Network System

    Energy Technology Data Exchange (ETDEWEB)

    Hagen Schempf

    2006-05-31

    Automatika, Inc. was contracted by the Department of Energy (DOE) and with co-funding from the Northeast Gas Association (NGA), to develop an in-pipe natural gas prototype measurement and wireless communications system for assessing and monitoring distribution networks. This projected was completed in April 2006, and culminated in the installation of more than 2 dozen GasNet nodes in both low- and high-pressure cast-iron and steel mains owned by multiple utilities in the northeastern US. Utilities are currently logging data (off-line) and monitoring data in real time from single and multiple networked sensors over cellular networks and collecting data using wireless bluetooth PDA systems. The system was designed to be modular, using in-pipe sensor-wands capable of measuring, flow, pressure, temperature, water-content and vibration. Internal antennae allowed for the use of the pipe-internals as a waveguide for setting up a sensor network to collect data from multiple nodes simultaneously. Sensor nodes were designed to be installed with low- and no-blow techniques and tools. Using a multi-drop bus technique with a custom protocol, all electronics were designed to be buriable and allow for on-board data-collection (SD-card), wireless relaying and cellular network forwarding. Installation options afforded by the design included direct-burial and external polemounted variants. Power was provided by one or more batteries, direct AC-power (Class I Div.2) and solar-array. The utilities are currently in a data-collection phase and intend to use the collected (and processed) data to make capital improvement decisions, compare it to Stoner model predictions and evaluate the use of such a system for future expansion, technology-improvement and commercialization starting later in 2006.

  14. GUIdock-VNC: using a graphical desktop sharing system to provide a browser-based interface for containerized software.

    Science.gov (United States)

    Mittal, Varun; Hung, Ling-Hong; Keswani, Jayant; Kristiyanto, Daniel; Lee, Sung Bong; Yeung, Ka Yee

    2017-04-01

    Software container technology such as Docker can be used to package and distribute bioinformatics workflows consisting of multiple software implementations and dependencies. However, Docker is a command line-based tool, and many bioinformatics pipelines consist of components that require a graphical user interface. We present a container tool called GUIdock-VNC that uses a graphical desktop sharing system to provide a browser-based interface for containerized software. GUIdock-VNC uses the Virtual Network Computing protocol to render the graphics within most commonly used browsers. We also present a minimal image builder that can add our proposed graphical desktop sharing system to any Docker packages, with the end result that any Docker packages can be run using a graphical desktop within a browser. In addition, GUIdock-VNC uses the Oauth2 authentication protocols when deployed on the cloud. As a proof-of-concept, we demonstrated the utility of GUIdock-noVNC in gene network inference. We benchmarked our container implementation on various operating systems and showed that our solution creates minimal overhead.

  15. SWAN: An expert system with natural language interface for tactical air capability assessment

    Science.gov (United States)

    Simmons, Robert M.

    1987-01-01

    SWAN is an expert system and natural language interface for assessing the war fighting capability of Air Force units in Europe. The expert system is an object oriented knowledge based simulation with an alternate worlds facility for performing what-if excursions. Responses from the system take the form of generated text, tables, or graphs. The natural language interface is an expert system in its own right, with a knowledge base and rules which understand how to access external databases, models, or expert systems. The distinguishing feature of the Air Force expert system is its use of meta-knowledge to generate explanations in the frame and procedure based environment.

  16. Structural systems identification of genetic regulatory networks.

    Science.gov (United States)

    Xiong, Hao; Choe, Yoonsuck

    2008-02-15

    Reverse engineering of genetic regulatory networks from experimental data is the first step toward the modeling of genetic networks. Linear state-space models, also known as linear dynamical models, have been applied to model genetic networks from gene expression time series data, but existing works have not taken into account available structural information. Without structural constraints, estimated models may contradict biological knowledge and estimation methods may over-fit. In this report, we extended expectation-maximization (EM) algorithms to incorporate prior network structure and to estimate genetic regulatory networks that can track and predict gene expression profiles. We applied our method to synthetic data and to SOS data and showed that our method significantly outperforms the regular EM without structural constraints. The Matlab code is available upon request and the SOS data can be downloaded from http://www.weizmann.ac.il/mcb/UriAlon/Papers/SOSData/, courtesy of Uri Alon. Zak's data is available from his website, http://www.che.udel.edu/systems/people/zak.

  17. Interfacing a biosurveillance portal and an international network of institutional analysts to detect biological threats.

    Science.gov (United States)

    Riccardo, Flavia; Shigematsu, Mika; Chow, Catherine; McKnight, C Jason; Linge, Jens; Doherty, Brian; Dente, Maria Grazia; Declich, Silvia; Barker, Mike; Barboza, Philippe; Vaillant, Laetitia; Donachie, Alastair; Mawudeku, Abla; Blench, Michael; Arthur, Ray

    2014-01-01

    The Early Alerting and Reporting (EAR) project, launched in 2008, is aimed at improving global early alerting and risk assessment and evaluating the feasibility and opportunity of integrating the analysis of biological, chemical, radionuclear (CBRN), and pandemic influenza threats. At a time when no international collaborations existed in the field of event-based surveillance, EAR's innovative approach involved both epidemic intelligence experts and internet-based biosurveillance system providers in the framework of an international collaboration called the Global Health Security Initiative, which involved the ministries of health of the G7 countries and Mexico, the World Health Organization, and the European Commission. The EAR project pooled data from 7 major internet-based biosurveillance systems onto a common portal that was progressively optimized for biological threat detection under the guidance of epidemic intelligence experts from public health institutions in Canada, the European Centre for Disease Prevention and Control, France, Germany, Italy, Japan, the United Kingdom, and the United States. The group became the first end users of the EAR portal, constituting a network of analysts working with a common standard operating procedure and risk assessment tools on a rotation basis to constantly screen and assess public information on the web for events that could suggest an intentional release of biological agents. Following the first 2-year pilot phase, the EAR project was tested in its capacity to monitor biological threats, proving that its working model was feasible and demonstrating the high commitment of the countries and international institutions involved. During the testing period, analysts using the EAR platform did not miss intentional events of a biological nature and did not issue false alarms. Through the findings of this initial assessment, this article provides insights into how the field of epidemic intelligence can advance through an

  18. Software structure for broadband wireless sensor network system

    Science.gov (United States)

    Kwon, Hyeokjun; Oh, Sechang; Yoon, Hargsoon; Varadan, Vijay K.

    2010-04-01

    Zigbee Sensor Network system has been investigating for monitoring and analyzing the data measured from a lot of sensors because the Zigbee Sensor Network has several advantages of low power consumption, compact size, and multi-node connection. However, it has a disadvantage not to be able to monitor the data measured from sensors at the remote area such as other room that is located at other city. This paper describes the software structure to compensate the defect with combining the Zigbee Sensor Network and wireless LAN technology for remote monitoring of measured sensor data. The software structure has both benefits of Zigbee Sensor Network and the advantage of wireless LAN. The software structure has three main software structures. The first software structure consists of the function in order to acquire the data from sensors and the second software structure is to gather the sensor data through wireless Zigbee and to send the data to Monitoring system by using wireless LAN. The second part consists of Linux packages software based on 2440 CPU (Samsung corp.), which has ARM9 core. The Linux packages include bootloader, device drivers, kernel, and applications, and the applications are TCP/IP server program, the program interfacing with Zigbee RF module, and wireless LAN program. The last part of software structure is to receive the sensor data through TCP/IP client program from Wireless Gate Unit and to display graphically measured data by using MATLAB program; the sensor data is measured on 100Hz sampling rate and the measured data has 10bit data resolution. The wireless data transmission rate per each channel is 1.6kbps.

  19. Multiprocessor communication system

    NARCIS (Netherlands)

    Bekooij, Marco Jan Gerrit

    2010-01-01

    The invention relates to a multiprocessor communication system including at least two processors which communicate with each other, the processors have network interfaces. The network interfaces contain at least one register which indicates the existing data or free space available.

  20. GAS MAIN SENSOR AND COMMUNICATIONS NETWORK SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Hagen Schempf

    2004-09-30

    Automatika, Inc. was contracted by the Department of Energy (DOE) and with co-funding from the New York Gas Group (NYGAS), to develop an in-pipe natural gas prototype measurement and wireless communications system for assessing and monitoring distribution networks. In Phase II of this three-phase program, an improved prototype system was built for low-pressure cast-iron and high-pressure steel (including a no-blow installation system) mains and tested in a serial-network configuration in a live network in Long Island with the support of Keyspan Energy, Inc. The experiment was carried out in several open-hole excavations over a multi-day period. The prototype units (3 total) combined sensors capable of monitoring pressure, flow, humidity, temperature and vibration, which were sampled and combined in data-packages in an in-pipe master-repeater-slave configuration in serial or ladder-network arrangements. It was verified that the system was capable of performing all data-sampling, data-storage and collection as expected, yielding interesting results as to flow-dynamics and vibration-detection. Wireless in-pipe communications were shown to be feasible and the system was demonstrated to run off in-ground battery- and above-ground solar power. The remote datalogger access and storage-card features were demonstrated and used to log and post-process system data. Real-time data-display on an updated Phase-I GUI was used for in-field demonstration and troubleshooting.

  1. System markets: Indirect network effects in action, or inaction?

    NARCIS (Netherlands)

    J.L.G. Binken (Jeroen)

    2010-01-01

    textabstractIn this dissertation, I empirically examine system markets up close. More specifically I examine indirect network effects, both demand-side and supply-side indirect network effects. Indirect network effects are the source of positive feedback in system markets, or so network effect

  2. Investigation on the Interface Characteristics of the Thermal Barrier Coating System through Flat Cylindrical Indenters

    Directory of Open Access Journals (Sweden)

    Shifeng Wen

    2014-01-01

    Full Text Available Thermal barrier coating (TBC systems are highly advanced material systems and usually applied to insulate components from large and prolonged heat loads by utilizing thermally insulating materials. In this study, the characteristics of the interface of thermal barrier coating systems have been simulated by the finite-element method (FEM. The emphasis was put on the stress distribution at the interface which is beneath the indenter. The effect of the interface roughness, the thermally grown oxide (TGO layer's thickness, and the modulus ratio (η of the thin film with the substrate has been considered. Finite-element results showed that the influences of the interface roughness and the TGO layer's thickness on stress distribution were important. At the same time, the residual stress distribution has been investigated in detail.

  3. System/360 Computer Assisted Network Scheduling (CANS) System

    Science.gov (United States)

    Brewer, A. C.

    1972-01-01

    Computer assisted scheduling techniques that produce conflict-free and efficient schedules have been developed and implemented to meet needs of the Manned Space Flight Network. CANS system provides effective management of resources in complex scheduling environment. System is automated resource scheduling, controlling, planning, information storage and retrieval tool.

  4. Analysis and design of networked control systems

    CERN Document Server

    You, Keyou; Xie, Lihua

    2015-01-01

    This monograph focuses on characterizing the stability and performance consequences of inserting limited-capacity communication networks within a control loop. The text shows how integration of the ideas of control and estimation with those of communication and information theory can be used to provide important insights concerning several fundamental problems such as: ·         minimum data rate for stabilization of linear systems over noisy channels; ·         minimum network requirement for stabilization of linear systems over fading channels; and ·         stability of Kalman filtering with intermittent observations. A fundamental link is revealed between the topological entropy of linear dynamical systems and the capacities of communication channels. The design of a logarithmic quantizer for the stabilization of linear systems under various network environments is also extensively discussed and solutions to many problems of Kalman filtering with intermittent observations are de...

  5. Conceptualizing and Advancing Research Networking Systems.

    Science.gov (United States)

    Schleyer, Titus; Butler, Brian S; Song, Mei; Spallek, Heiko

    2012-03-01

    Science in general, and biomedical research in particular, is becoming more collaborative. As a result, collaboration with the right individuals, teams, and institutions is increasingly crucial for scientific progress. We propose Research Networking Systems (RNS) as a new type of system designed to help scientists identify and choose collaborators, and suggest a corresponding research agenda. The research agenda covers four areas: foundations, presentation, architecture, and evaluation. Foundations includes project-, institution- and discipline-specific motivational factors; the role of social networks; and impression formation based on information beyond expertise and interests. Presentation addresses representing expertise in a comprehensive and up-to-date manner; the role of controlled vocabularies and folksonomies; the tension between seekers' need for comprehensive information and potential collaborators' desire to control how they are seen by others; and the need to support serendipitous discovery of collaborative opportunities. Architecture considers aggregation and synthesis of information from multiple sources, social system interoperability, and integration with the user's primary work context. Lastly, evaluation focuses on assessment of collaboration decisions, measurement of user-specific costs and benefits, and how the large-scale impact of RNS could be evaluated with longitudinal and naturalistic methods. We hope that this article stimulates the human-computer interaction, computer-supported cooperative work, and related communities to pursue a broad and comprehensive agenda for developing research networking systems.

  6. Conceptualizing and Advancing Research Networking Systems

    Science.gov (United States)

    SCHLEYER, TITUS; BUTLER, BRIAN S.; SONG, MEI; SPALLEK, HEIKO

    2013-01-01

    Science in general, and biomedical research in particular, is becoming more collaborative. As a result, collaboration with the right individuals, teams, and institutions is increasingly crucial for scientific progress. We propose Research Networking Systems (RNS) as a new type of system designed to help scientists identify and choose collaborators, and suggest a corresponding research agenda. The research agenda covers four areas: foundations, presentation, architecture, and evaluation. Foundations includes project-, institution- and discipline-specific motivational factors; the role of social networks; and impression formation based on information beyond expertise and interests. Presentation addresses representing expertise in a comprehensive and up-to-date manner; the role of controlled vocabularies and folksonomies; the tension between seekers’ need for comprehensive information and potential collaborators’ desire to control how they are seen by others; and the need to support serendipitous discovery of collaborative opportunities. Architecture considers aggregation and synthesis of information from multiple sources, social system interoperability, and integration with the user’s primary work context. Lastly, evaluation focuses on assessment of collaboration decisions, measurement of user-specific costs and benefits, and how the large-scale impact of RNS could be evaluated with longitudinal and naturalistic methods. We hope that this article stimulates the human-computer interaction, computer-supported cooperative work, and related communities to pursue a broad and comprehensive agenda for developing research networking systems. PMID:24376309

  7. Systems biology of plant molecular networks: from networks to models

    NARCIS (Netherlands)

    Valentim, F.L.

    2015-01-01

    Developmental processes are controlled by regulatory networks (GRNs), which are tightly coordinated networks of transcription factors (TFs) that activate and repress gene expression within a spatial and temporal context. In Arabidopsis thaliana, the key components and network structures of the GRNs

  8. Support for Programming Models in Network-on-Chip-based Many-core Systems

    DEFF Research Database (Denmark)

    Rasmussen, Morten Sleth

    This thesis addresses aspects of support for programming models in Network-on- Chip-based many-core architectures. The main focus is to consider architectural support for a plethora of programming models in a single system. The thesis has three main parts. The first part considers parallelization...... models to be supported by a single architecture. The architecture features a specialized network interface processor which allows extensive configurability of the memory system. Based on this architecture, a detailed implementation of the cache coherent shared memory programming model is presented...

  9. mREST Interface Specification

    Science.gov (United States)

    McCartney, Patrick; MacLean, John

    2012-01-01

    mREST is an implementation of the REST architecture specific to the management and sharing of data in a system of logical elements. The purpose of this document is to clearly define the mREST interface protocol. The interface protocol covers all of the interaction between mREST clients and mREST servers. System-level requirements are not specifically addressed. In an mREST system, there are typically some backend interfaces between a Logical System Element (LSE) and the associated hardware/software system. For example, a network camera LSE would have a backend interface to the camera itself. These interfaces are specific to each type of LSE and are not covered in this document. There are also frontend interfaces that may exist in certain mREST manager applications. For example, an electronic procedure execution application may have a specialized interface for configuring the procedures. This interface would be application specific and outside of this document scope. mREST is intended to be a generic protocol which can be used in a wide variety of applications. A few scenarios are discussed to provide additional clarity but, in general, application-specific implementations of mREST are not specifically addressed. In short, this document is intended to provide all of the information necessary for an application developer to create mREST interface agents. This includes both mREST clients (mREST manager applications) and mREST servers (logical system elements, or LSEs).

  10. Teleradiology system analysis using a discrete event-driven block-oriented network simulator

    Science.gov (United States)

    Stewart, Brent K.; Dwyer, Samuel J., III

    1992-07-01

    Performance evaluation and trade-off analysis are the central issues in the design of communication networks. Simulation plays an important role in computer-aided design and analysis of communication networks and related systems, allowing testing of numerous architectural configurations and fault scenarios. We are using the Block Oriented Network Simulator (BONeS, Comdisco, Foster City, CA) software package to perform discrete, event- driven Monte Carlo simulations in capacity planning, tradeoff analysis and evaluation of alternate architectures for a high-speed, high-resolution teleradiology project. A queuing network model of the teleradiology system has been devise, simulations executed and results analyzed. The wide area network link uses a switched, dial-up N X 56 kbps inverting multiplexer where the number of digital voice-grade lines (N) can vary from one (DS-0) through 24 (DS-1). The proposed goal of such a system is 200 films (2048 X 2048 X 12-bit) transferred between a remote and local site in an eight hour period with a mean delay time less than five minutes. It is found that: (1) the DS-1 service limit is around 100 films per eight hour period with a mean delay time of 412 +/- 39 seconds, short of the goal stipulated above; (2) compressed video teleconferencing can be run simultaneously with image data transfer over the DS-1 wide area network link without impacting the performance of the described teleradiology system; (3) there is little sense in upgrading to a higher bandwidth WAN link like DS-2 or DS-3 for the current system; and (4) the goal of transmitting 200 films in an eight hour period with a mean delay time less than five minutes can be achieved simply if the laser printer interface is updated from the current DR-11W interface to a much faster SCSI interface.

  11. Pathways, Networks and Systems Medicine Conferences

    Energy Technology Data Exchange (ETDEWEB)

    Nadeau, Joseph H. [Pacific Northwest Research Institute

    2013-11-25

    The 6th Pathways, Networks and Systems Medicine Conference was held at the Minoa Palace Conference Center, Chania, Crete, Greece (16-21 June 2008). The Organizing Committee was composed of Joe Nadeau (CWRU, Cleveland), Rudi Balling (German Research Centre, Brauschweig), David Galas (Institute for Systems Biology, Seattle), Lee Hood (Institute for Systems Biology, Seattle), Diane Isonaka (Seattle), Fotis Kafatos (Imperial College, London), John Lambris (Univ. Pennsylvania, Philadelphia),Harris Lewin (Univ. of Indiana, Urbana-Champaign), Edison Liu (Genome Institute of Singapore, Singapore), and Shankar Subramaniam (Univ. California, San Diego). A total of 101 individuals from 21 countries participated in the conference: USA (48), Canada (5), France (5), Austria (4), Germany (3), Italy (3), UK (3), Greece (2), New Zealand (2), Singapore (2), Argentina (1), Australia (1), Cuba (1), Denmark (1), Japan (1), Mexico (1), Netherlands (1), Spain (1), Sweden (1), Switzerland (1). With respect to speakers, 29 were established faculty members and 13 were graduate students or postdoctoral fellows. With respect to gender representation, among speakers, 13 were female and 28 were male, and among all participants 43 were female and 58 were male. Program these included the following topics: Cancer Pathways and Networks (Day 1), Metabolic Disease Networks (Day 2), Day 3 ? Organs, Pathways and Stem Cells (Day 3), and Day 4 ? Inflammation, Immunity, Microbes and the Environment (Day 4). Proceedings of the Conference were not published.

  12. A Computer System for Effective Management of a Medical Library Network

    Directory of Open Access Journals (Sweden)

    Richard E. Nance

    1971-12-01

    Full Text Available TRIPS (TALON Reporting and Information Processing System is an interactive software system for generating reports to NLM on regional medical library network activity and constitutes a vital part of a network management information system (NEMIS for the South Central Regional Medical Library Program. Implemented on a PDP-lOfSRU 1108 interfaced system, TRIPS accepts paper tape input describing network transactions and generates output statistics on disposition of requests, elapsed time for completing filled requests, time to clear unfilled requests, arrival time distribution of requests by day of month, and various other measures of activity andjor performance. Emphasized in the TRIPS design are flexibility, extensibility, and system integrity. Processing costs, neglecting preparation of input which may be accomplished in several ways, are estimated at $.05 per transaction, a transaction being the transmittal of a message from one library to another.

  13. Soybean Yield Prediction Using Adaptive Nero-Fuzzy Interface System (ANFIS

    Directory of Open Access Journals (Sweden)

    S. J. Sajadi

    2015-09-01

    Full Text Available Productivity of rainfed crops may be predicted using the climatic parameters. Crop yield prediction has an important role in agricultural policies including determining the crop price. Well-known prediction methods are regression method and arterial neural networks. In this paper soybean yield is predicted using Adaptive Nero-Fuzzy Interface System (ANFIS and 11 years of climatic data (1998-2009 in Gonbad-e-Kavous region of Golestan province, Iran. Mean weekly rainfall, mean weekly temperature, mean weekly relative humidity and mean weekly sun shine hours were ANFIS inputs and its output was soybean grain yield (kg/ha. Stepwise Regression for Feature selection from climatic data was done with the SPSS18 software and ANFIS was created, trained and tested with MATLAB R2011a software. Trained ANFIS has ‘constant’ membership function in output layer and ‘gaussmf’ membership function in input layer. Each input has 3 membership functions and each output has one membership function. Root Mean Square Error (RMSE criterion was used to evaluate the performance of the ANFIS. The results showed that the proposed ANFIS with 21 rules has a prediction error (RMSE of 102.170.

  14. The network management expert system prototype for Sun Workstations

    Science.gov (United States)

    Leigh, Albert

    1990-01-01

    Networking has become one of the fastest growing areas in the computer industry. The emergence of distributed workstations make networking more popular because they need to have connectivity between themselves as well as with other computer systems to share information and system resources. Making the networks more efficient and expandable by selecting network services and devices that fit to one's need is vital to achieve reliability and fast throughput. Networks are dynamically changing and growing at a rate that outpaces the available human resources. Therefore, there is a need to multiply the expertise rapidly rather than employing more network managers. In addition, setting up and maintaining networks by following the manuals can be tedious and cumbersome even for an experienced network manager. This prototype expert system was developed to experiment on Sun Workstations to assist system and network managers in selecting and configurating network services.

  15. Network resource control for grid workflow management systems

    NARCIS (Netherlands)

    Strijkers, R.J.; Cristea, M.; Korkhov, V.; Marchal, D.; Belloum, A.; Laat, C.de; Meijer, R.J.

    2010-01-01

    Grid workflow management systems automate the orchestration of scientific applications with large computational and data processing needs, but lack control over network resources. Consequently, the management system cannot prevent multiple communication intensive applications to compete for network

  16. Self-assembled supramolecular networks at interfaces: Molecular immobilization and recognition using nanoporous templates

    Science.gov (United States)

    Li, Min; Zeng, Qingdao; Wang, Chen

    2011-10-01

    In this review a series of organic-based open porous networks are discussed, in which hydrogen bonds play an important role in network formation. Using these open networks as molecular templates: 1) a wealth of functional guest species can be immobilized; 2) fullerene molecules can be separated and recognized; 3) photoisomerization reactions can be observed by STM; 4) 1D molecular arrays can be constructed; and 5) heterogeneous bilayer structures can be formed. It is envisioned that these supramolecular networks might be developed into a new family of useful soft frameworks for studies toward shape-selective catalysis, molecular recognition and host-guest supramolecular chemistry.

  17. Statistical physics of networks, information and complex systems

    Energy Technology Data Exchange (ETDEWEB)

    Ecke, Robert E [Los Alamos National Laboratory

    2009-01-01

    In this project we explore the mathematical methods and concepts of statistical physics that are fmding abundant applications across the scientific and technological spectrum from soft condensed matter systems and bio-infonnatics to economic and social systems. Our approach exploits the considerable similarity of concepts between statistical physics and computer science, allowing for a powerful multi-disciplinary approach that draws its strength from cross-fertilization and mUltiple interactions of researchers with different backgrounds. The work on this project takes advantage of the newly appreciated connection between computer science and statistics and addresses important problems in data storage, decoding, optimization, the infonnation processing properties of the brain, the interface between quantum and classical infonnation science, the verification of large software programs, modeling of complex systems including disease epidemiology, resource distribution issues, and the nature of highly fluctuating complex systems. Common themes that the project has been emphasizing are (i) neural computation, (ii) network theory and its applications, and (iii) a statistical physics approach to infonnation theory. The project's efforts focus on the general problem of optimization and variational techniques, algorithm development and infonnation theoretic approaches to quantum systems. These efforts are responsible for fruitful collaborations and the nucleation of science efforts that span multiple divisions such as EES, CCS, 0 , T, ISR and P. This project supports the DOE mission in Energy Security and Nuclear Non-Proliferation by developing novel infonnation science tools for communication, sensing, and interacting complex networks such as the internet or energy distribution system. The work also supports programs in Threat Reduction and Homeland Security.

  18. A Digital Interface for the Part Designers and the Fixture Designers for a Reconfigurable Assembly System

    Directory of Open Access Journals (Sweden)

    Vishwa V. Kumar

    2013-01-01

    Full Text Available This paper presents a web-based framework for interfacing product designers and fixture designers to fetch the benefits of early supplier involvement (ESI to a reconfigurable assembly system (RAS. The interfacing of the two members requires four steps, namely, collaboration chain, fixture supplier selection, knowledge share, and accommodation of service facilities so as to produce multiple products on a single assembly line. The interfacing not only provokes concurrency in the activities of product and fixture designer but also enables the assembly systems to tackle the spatial and generational variety. Among the four stages of interfacing, two steps are characterized by optimization issues, one from the product customer side and the other from the fixture designer side. To impart promptness in the optimization and hence the interaction, computationally economic tools are also presented in the paper for both of the supplier selection and fixture design optimization.

  19. Fencing network direct memory access data transfers in a parallel active messaging interface of a parallel computer

    Science.gov (United States)

    Blocksome, Michael A.; Mamidala, Amith R.

    2015-07-07

    Fencing direct memory access (`DMA`) data transfers in a parallel active messaging interface (`PAMI`) of a parallel computer, the PAMI including data communications endpoints, each endpoint including specifications of a client, a context, and a task, the endpoints coupled for data communications through the PAMI and through DMA controllers operatively coupled to a deterministic data communications network through which the DMA controllers deliver data communications deterministically, including initiating execution through the PAMI of an ordered sequence of active DMA instructions for DMA data transfers between two endpoints, effecting deterministic DMA data transfers through a DMA controller and the deterministic data communications network; and executing through the PAMI, with no FENCE accounting for DMA data transfers, an active FENCE instruction, the FENCE instruction completing execution only after completion of all DMA instructions initiated prior to execution of the FENCE instruction for DMA data transfers between the two endpoints.

  20. The Web Interface Template System (WITS), a software developer`s tool

    Energy Technology Data Exchange (ETDEWEB)

    Lauer, L.J.; Lynam, M.; Muniz, T. [Sandia National Labs., Albuquerque, NM (United States). Financial Systems Dept.

    1995-11-01

    The Web Interface Template System (WITS) is a tool for software developers. WITS is a three-tiered, object-oriented system operating in a Client/Server environment. This tool can be used to create software applications that have a Web browser as the user interface and access a Sybase database. Development, modification, and implementation are greatly simplified because the developer can change and test definitions immediately, without writing or compiling any code. This document explains WITS functionality, the system structure and components of WITS, and how to obtain, install, and use the software system.

  1. Diffusion-controlled interface kinetics-inclusive system-theoretic propagation models for molecular communication systems

    Science.gov (United States)

    Chude-Okonkwo, Uche A. K.; Malekian, Reza; Maharaj, B. T.

    2015-12-01

    Inspired by biological systems, molecular communication has been proposed as a new communication paradigm that uses biochemical signals to transfer information from one nano device to another over a short distance. The biochemical nature of the information transfer process implies that for molecular communication purposes, the development of molecular channel models should take into consideration diffusion phenomenon as well as the physical/biochemical kinetic possibilities of the process. The physical and biochemical kinetics arise at the interfaces between the diffusion channel and the transmitter/receiver units. These interfaces are herein termed molecular antennas. In this paper, we present the deterministic propagation model of the molecular communication between an immobilized nanotransmitter and nanoreceiver, where the emission and reception kinetics are taken into consideration. Specifically, we derived closed-form system-theoretic models and expressions for configurations that represent different communication systems based on the type of molecular antennas used. The antennas considered are the nanopores at the transmitter and the surface receptor proteins/enzymes at the receiver. The developed models are simulated to show the influence of parameters such as the receiver radius, surface receptor protein/enzyme concentration, and various reaction rate constants. Results show that the effective receiver surface area and the rate constants are important to the system's output performance. Assuming high rate of catalysis, the analysis of the frequency behavior of the developed propagation channels in the form of transfer functions shows significant difference introduce by the inclusion of the molecular antennas into the diffusion-only model. It is also shown that for t > > 0 and with the information molecules' concentration greater than the Michaelis-Menten kinetic constant of the systems, the inclusion of surface receptors proteins and enzymes in the models

  2. LEARNING COMMUNICATION AND INTERFACE IN COMPUTER-BASED EDUCATION SYSTEMS AND ENVIRONMENTS

    OpenAIRE

    Sergey F. Sergeev; Anastasia S. Sergeeva

    2014-01-01

    In present article we discuss theoretical and practical aspects of learning communication, as well as practical questions of learning systems human interfaces problem. We show the history of the problem, theoretical, methodological, psychological, and technological aspects of learning communication and interfaces, as well as some distinguished ways of solving the problem in classical, non-classical and post non-classical engineering psychology and ergonomics. We present the complex model of o...

  3. Fast economical data acquisition systems based on the CERN S-LINK interface standard

    CERN Document Server

    Suttrop, W; Van der Bij, H C; Klenge, S

    2002-01-01

    Fast data acquisition with direct transfer to memory is facilitated by the S-LINK interface protocol, developed at CERN, the European Organization for Nuclear Research. The need for customized hardware development reduces to application-specific front-end interfaces. Two applications of S-LINK data acquisition systems for microwave Doppler reflectometry and electron cyclotron emission radiometry at the ASDEX Upgrade nuclear fusion experiment are presented.

  4. Fast economical data acquisition systems based on the CERN S-LINK interface standard

    Energy Technology Data Exchange (ETDEWEB)

    Suttrop, W. E-mail: suttrop@ipp.mpg.de; Behler, K.; Bij, H.C. van der; Klenge, S

    2002-06-01

    Fast data acquisition with direct transfer to memory is facilitated by the S-LINK interface protocol, developed at CERN, the European Organization for Nuclear Research. The need for customized hardware development reduces to application-specific front-end interfaces. Two applications of S-LINK data acquisition systems for microwave Doppler reflectometry and electron cyclotron emission radiometry at the ASDEX Upgrade nuclear fusion experiment are presented.

  5. Optical fiber telecommunications systems and networks

    CERN Document Server

    Kaminow, Ivan; Willner, Alan E

    2013-01-01

    Optical Fiber Telecommunications VI (A&B) is the sixth in a series that has chronicled the progress in the R&D of lightwave communications since the early 1970s. Written by active authorities from academia and industry, this edition brings a fresh look to many essential topics, including devices, subsystems, systems and networks. A central theme is the enabling of high-bandwidth communications in a cost-effective manner for the development of customer applications. These volumes are an ideal reference for R&D engineers and managers, optical systems implementers, university researchers and s

  6. Some queuing network models of computer systems

    Science.gov (United States)

    Herndon, E. S.

    1980-01-01

    Queuing network models of a computer system operating with a single workload type are presented. Program algorithms are adapted for use on the Texas Instruments SR-52 programmable calculator. By slightly altering the algorithm to process the G and H matrices row by row instead of column by column, six devices and an unlimited job/terminal population could be handled on the SR-52. Techniques are also introduced for handling a simple load dependent server and for studying interactive systems with fixed multiprogramming limits.

  7. BABY MONITORING SYSTEM USING WIRELESS SENSOR NETWORKS

    Directory of Open Access Journals (Sweden)

    G. Rajesh

    2014-09-01

    Full Text Available Sudden Infant Death Syndrome (SIDS is marked by the sudden death of an infant during sleep that is not predicted by the medical history and remains unexplained even after thorough forensic autopsy and detailed death investigation. In this we developed a system that provides solutions for the above problems by making the crib smart using the wireless sensor networks (WSN and smart phones. The system provides visual monitoring service through live video, alert services by crib fencing and awakens alert, monitoring services by temperature reading and light intensity reading, vaccine reminder and weight monitoring.

  8. Multiple IMU system hardware interface design, volume 2

    Science.gov (United States)

    Landey, M.; Brown, D.

    1975-01-01

    The design of each system component is described. Emphasis is placed on functional requirements unique in this system, including data bus communication, data bus transmitters and receivers, and ternary-to-binary torquing decision logic. Mechanization drawings are presented.

  9. Future Wireless Networks and Information Systems Volume 1

    CERN Document Server

    2012-01-01

    This volume contains revised and extended research articles written by prominent researchers participating in ICFWI 2011 conference. The 2011 International Conference on Future Wireless Networks and Information Systems (ICFWI 2011) has been held on November 30 ~ December 1, 2011, Macao, China. Topics covered include Wireless Information Networks, Wireless Networking Technologies, Mobile Software and Services, intelligent computing, network management, power engineering, control engineering, Signal and Image Processing, Machine Learning, Control Systems and Applications, The book will offer the states of arts of tremendous advances in Wireless Networks and Information Systems and also serve as an excellent reference work for researchers and graduate students working on Wireless Networks and Information Systems.

  10. The Self-networking Safety Monitoring System Design in the Pit

    Directory of Open Access Journals (Sweden)

    Min LI

    2014-02-01

    Full Text Available In most of the traditional monitoring system, wired or handled devices are used to transmit signals, which is inconvenient for power supply, signal management, transmission and maintenance. To overcome these shortcomings, it is mainly introduced how the ZigBee wireless communication protocol is used as the technical support to put forward a wireless combustible gas monitoring and networking solution in this paper. Meanwhile, the network node’s hardware solution is designed on the basis of the ZigBee technology using CC2530 chip which is made by TI (Texas Instrument. Besides of networking and data collection, in order to get the real-time monitoring conveniently, the friendly human-computer interaction interface is designed carefully making use of VC++ 6.0 as well. The study results demonstrate that the monitoring system for acquisition has a fast speed, good stability, flexible networking and high use value.

  11. Effect of Er:YAG laser energy on the morphology of enamel/adhesive system interface

    Science.gov (United States)

    Delfino, Carina Sinclér; Souza-Zaroni, Wanessa Christine; Corona, Silmara Aparecida Milori; Pécora, Jesus Djalma; Palma-Dibb, Regina Guenka

    2006-10-01

    The aim of this study was to evaluate in vitro the influence of Er:YAG laser energy variation to cavity preparation on the morphology of enamel/adhesive system interface, using SEM. Eighteen molars were used and the buccal surfaces were flattened without dentine exposure. The specimens were randomly assigned to two groups, according to the adhesive system (conventional total-etching or self-etching), and each group was divided into three subgroups (bur carbide in turbine of high rotation, Er:YAG laser 250 mJ/4 Hz and Er:YAG laser 300 mJ/4 Hz) containing six teeth each. The enamel/adhesive system interface was serially sectioned and prepared for SEM. The Er:YAG laser, in general, produced a more irregular adhesive interface than the control group. For Er:YAG laser 250 mJ there was formation of a more regular hybrid layer with good tag formation, mainly in the total-etching system. However, Er:YAG laser 300 mJ showed a more irregular interface with amorphous enamel and fused areas, for both adhesive systems. It was concluded that cavity preparation with Er:YAG laser influenced on the morphology of enamel/adhesive system interface and the tissual alterations were more evident when the energy was increased.

  12. Virtualized Network Function Orchestration System and Experimental Network Based QR Recognition for a 5G Mobile Access Network

    Directory of Open Access Journals (Sweden)

    Misun Ahn

    2017-12-01

    Full Text Available This paper proposes a virtualized network function orchestration system based on Network Function Virtualization (NFV, one of the main technologies in 5G mobile networks. This system should provide connectivity between network devices and be able to create flexible network function and distribution. This system focuses more on access networks. By experimenting with various scenarios of user service established and activated in a network, we examine whether rapid adoption of new service is possible and whether network resources can be managed efficiently. The proposed method is based on Bluetooth transfer technology and mesh networking to provide automatic connections between network machines and on a Docker flat form, which is a container virtualization technology for setting and managing key functions. Additionally, the system includes a clustering and recovery measure regarding network function based on the Docker platform. We will briefly introduce the QR code perceived service as a user service to examine the proposal and based on this given service, we evaluate the function of the proposal and present analysis. Through the proposed approach, container relocation has been implemented according to a network device’s CPU usage and we confirm successful service through function evaluation on a real test bed. We estimate QR code recognition speed as the amount of network equipment is gradually increased, improving user service and confirm that the speed of recognition is increased as the assigned number of network devices is increased by the user service.

  13. Neural growth into a microchannel network: towards a regenerative neural interface

    NARCIS (Netherlands)

    Wieringa, P.A.; Wiertz, Remy; le Feber, Jakob; Rutten, Wim

    2009-01-01

    We propose and validated a design for a highly selective 'endcap' regenerative neural interface towards a neuroprosthesis. In vitro studies using rat cortical neurons determine if a branching microchannel structure can counter fasciculated growth and cause neurites to separte from one another,

  14. Continued Development and Implementation of the Universal Network Interface Device (UNID) II, Digital Engineering Laboratory Network (DELNET) Volume 1.

    Science.gov (United States)

    1984-12-01

    Chart - , 1’: - . [ a frr-ie has been received froia aetwork then .] do if the frame is a supervisory frane then do if the sequence bit is true then...network to network then do if frane sequence bit is true then set iliput sequence bit true e set input sequence bit false build a supervisory frame...input sequence bit true ,eis a set input sequence bit false "uil a s3upervisory frame si-vve frane to loc-al buffer service local buffer pointer end end

  15. Amorphous iron-(hydr) oxide networks at liquid/vapor interfaces: in situ X-ray scattering and spectroscopy studies.

    Science.gov (United States)

    Wang, Wenjie; Pleasants, Jacob; Bu, Wei; Park, Rebecca Y; Kuzmenko, Ivan; Vaknin, David

    2012-10-15

    Surface sensitive X-ray reflectivity (XR), fluorescence (XF), and grazing incidence X-ray diffraction (GIXD) experiments were conducted to determine the accumulation of ferric iron Fe (III) or ferrous iron Fe (II) under dihexadecyl phosphate (DHDP) or arachidic acid (AA) Langmuir monolayers at liquid/vapor interfaces. Analysis of the X-ray reflectivity and fluorescence data of monolayers on the aqueous subphases containing FeCl(3) indicates remarkably high levels of surface-bound Fe (III) in number of Fe(3+) ions per molecule (DHDP or AA) that exceed the amount necessary to neutralize a hypothetically completely deprotonated monolayer (DHDP or AA). These results suggest that nano-scale iron (hydr) oxide complexes (oxides, hydroxides or oxyhydroxides) bind to the headgroups and effectively overcompensate the maximum possible charges at the interface. The lack of evidence of in-plane ordering in GIXD measurements and strong effects on the surface-pressure versus molecular area isotherms indicate that an amorphous network of iron (hydr) oxide complexes contiguous to the headgroups is formed. Similar experiments with FeCl(2) generally resulted with the oxidation of Fe (II)-Fe (III) which consequently leads to ferric Fe (III) complexes binding albeit with less iron at the interface. Controlling the oxidation of Fe (II) changes the nature and amount of binding significantly. The implications to biomineralization of iron (hydr) oxides are briefly discussed. Copyright © 2012 Elsevier Inc. All rights reserved.

  16. Amorphous iron-(hydr) oxide networks at liquid/vapor interfaces: In situ X-ray scattering and spectroscopy studies

    Energy Technology Data Exchange (ETDEWEB)

    Wang, W.; Pleasants, J.; Bu, W.; Park, R.Y.; Kuzmenko, I.; Vaknin, D.

    2012-06-23

    Surface sensitive X-ray reflectivity (XR), fluorescence (XF), and grazing incidence X-ray diffraction (GIXD) experiments were conducted to determine the accumulation of ferric iron Fe (III) or ferrous iron Fe (II) under dihexadecyl phosphate (DHDP) or arachidic acid (AA) Langmuir monolayers at liquid/vapor interfaces. Analysis of the X-ray reflectivity and fluorescence data of monolayers on the aqueous subphases containing FeCl3 indicates remarkably high levels of surface-bound Fe (III) in number of Fe3þ ions per molecule (DHDP or AA) that exceed the amount necessary to neutralize a hypothetically completely deprotonated monolayer (DHDP or AA). These results suggest that nano-scale iron (hydr) oxide complexes (oxides, hydroxides or oxyhydroxides) bind to the headgroups and effectively overcompensate the maximum possible charges at the interface. The lack of evidence of in-plane ordering in GIXD measurements and strong effects on the surface-pressure versus molecular area isotherms indicate that an amorphous network of iron (hydr) oxide complexes contiguous to the headgroups is formed. Similar experiments with FeCl2 generally resulted with the oxidation of Fe (II)–Fe (III) which consequently leads to ferric Fe (III) complexes binding albeit with less iron at the interface. Controlling the oxidation of Fe (II) changes the nature and amount of binding significantly. The implications to biomineralization of iron (hydr) oxides are briefly discussed.

  17. Intrusion Detection in Networked Control Systems: From System Knowledge to Network Security

    NARCIS (Netherlands)

    Caselli, M.

    2016-01-01

    Networked control system‿ (NCS) is an umbrella term encompassing a broad variety of infrastructures such as industrial control systems (ICSs) and building automation systems (BASs). Nowadays, all these infrastructures play an important role in several aspects of our daily life, from managing

  18. PDA-phone-based instant transmission of radiological images over a CDMA network by combining the PACS screen with a Bluetooth-interfaced local wireless link.

    Science.gov (United States)

    Kim, Dong Keun; Yoo, Sun K; Park, Jeong Jin; Kim, Sun Ho

    2007-06-01

    Remote teleconsultation by specialists is important for timely, correct, and specialized emergency surgical and medical decision making. In this paper, we designed a new personal digital assistant (PDA)-phone-based emergency teleradiology system by combining cellular communication with Bluetooth-interfaced local wireless links. The mobility and portability resulting from the use of PDAs and wireless communication can provide a more effective means of emergency teleconsultation without requiring the user to be limited to a fixed location. Moreover, it enables synchronized radiological image sharing between the attending physician in the emergency room and the remote specialist on picture archiving and communication system terminals without distorted image acquisition. To enable rapid and fine-quality radiological image transmission over a cellular network in a secure manner, progressive compression and security mechanisms have been incorporated. The proposed system is tested over a code division Multiple Access 1x-Evolution Data-Only network to evaluate the performance and to demonstrate the feasibility of this system in a real-world setting.

  19. Comparing two anesthesia information management system user interfaces: a usability evaluation.

    Science.gov (United States)

    Wanderer, Jonathan P; Rao, Anoop V; Rothwell, Sarah H; Ehrenfeld, Jesse M

    2012-11-01

    Anesthesia information management systems (AIMS) have been developed by multiple vendors and are deployed in thousands of operating rooms around the world, yet not much is known about measuring and improving AIMS usability. We developed a methodology for evaluating AIMS usability in a low-fidelity simulated clinical environment and used it to compare an existing user interface with a revised version. We hypothesized that the revised user interface would be more useable. In a low-fidelity simulated clinical environment, twenty anesthesia providers documented essential anesthetic information for the start of the case using both an existing and a revised user interface. Participants had not used the revised user interface previously and completed a brief training exercise prior to the study task. All participants completed a workload assessment and a satisfaction survey. All sessions were recorded. Multiple usability metrics were measured. The primary outcome was documentation accuracy. Secondary outcomes were perceived workload, number of documentation steps, number of user interactions, and documentation time. The interfaces were compared and design problems were identified by analyzing recorded sessions and survey results. Use of the revised user interface was shown to improve documentation accuracy from 85.1% to 92.4%, a difference of 7.3% (95% confidence interval [CI] for the difference 1.8 to 12.7). The revised user interface decreased the number of user interactions by 6.5 for intravenous documentation (95% CI 2.9 to 10.1) and by 16.1 for airway documentation (95% CI 11.1 to 21.1). The revised user interface required 3.8 fewer documentation steps (95% CI 2.3 to 5.4). Airway documentation time was reduced by 30.5 seconds with the revised workflow (95% CI 8.5 to 52.4). There were no significant time differences noted in intravenous documentation or in total task time. No difference in perceived workload was found between the user interfaces. Two user interface

  20. ATTENTIONAL NETWORKS AND SELECTIVE VISUAL SYSTEM

    Directory of Open Access Journals (Sweden)

    ALEJANDRO CASTILLO MORENO

    2006-05-01

    Full Text Available In this paper we checked the principal researches and theories to explain the attention system functioning.We are going to start reviewing along time about the concept of attention, from filter theories andresources distributor theories, to the current theories in which attention is conceived as a control system.From this last point of view, we will emphasize on the attentional networks theory of Posner, thatproposes different systems to explain diverse aspects of attention, but they are related to each other. Atlast in this paper, we will mention experimental results that have been important to characterize theselective attentional mechanisms of the human visual system, using the attentional spotlight model forthis aim.

  1. Spaceport Command and Control System User Interface Testing

    Science.gov (United States)

    Huesman, Jacob

    2016-01-01

    The Spaceport Command and Control System will be the National Aeronautics and Space Administration's newest system for launching commercial and government owned spacecraft. It's a large system with many parts all in need of testing. To improve upon testing already done by NASA engineers, the Engineering Directorate, Electrical Division (NE-E) of Kennedy Space Center has hired a group of interns each of the last few semesters to develop novel ways of improving the testing process.

  2. OpenIGTLink interface for state control and visualisation of a robot for image-guided therapy systems.

    Science.gov (United States)

    Tauscher, Sebastian; Tokuda, Junichi; Schreiber, Günter; Neff, Thomas; Hata, Nobuhiko; Ortmaier, Tobias

    2015-03-01

    The integration of a robot into an image-guided therapy system is still a time consuming process, due to the lack of a well-accepted standard for interdevice communication. The aim of this project is to simplify this procedure by developing an open interface based on three interface classes: state control, visualisation, and sensor. A state machine on the robot control is added to the concept because the robot has its own workflow during surgical procedures, which differs from the workflow of the surgeon. A KUKA Light Weight Robot is integrated into the medical technology environment of the Institute of Mechatronic Systems as a proof of concept. Therefore, 3D Slicer was used as visualisation and state control software. For the network communication the OpenIGTLink protocol was implemented. In order to achieve high rate control of the robot the "KUKA Sunrise. Connectivity SmartServo" package was used. An exemplary state machine providing states typically used by image-guided therapy interventions, was implemented. Two interface classes, which allow for a direct use of OpenIGTLink for robot control on the one hand and visualisation on the other hand were developed. Additionally, a 3D Slicer module was written to operate the state control. Utilising the described software concept the state machine could be operated by the 3D Slicer module with 20 Hz cycle rate and no data loss was detected during a test phase of approximately 270s (13,640 packages). Furthermore, the current robot pose could be sent with more than 60 Hz. No influence on the performance of the state machine by the communication thread could be measured. Simplified integration was achieved by using only one programming context for the implementation of the state machine, the interfaces, and the robot control. Eventually, the exemplary state machine can be easily expanded by adding new states.

  3. Intelliface - Intelligent Assistant for Interfacing Diagnosis and Planning Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To integrate automated diagnosis and automated planning functions, one must translate diagnosed system faults to corresponding changes in resource availabilities....

  4. Performance Evaluation of Speech Recognition Systems as a Next-Generation Pilot-Vehicle Interface Technology

    Science.gov (United States)

    Arthur, Jarvis J., III; Shelton, Kevin J.; Prinzel, Lawrence J., III; Bailey, Randall E.

    2016-01-01

    During the flight trials known as Gulfstream-V Synthetic Vision Systems Integrated Technology Evaluation (GV-SITE), a Speech Recognition System (SRS) was used by the evaluation pilots. The SRS system was intended to be an intuitive interface for display control (rather than knobs, buttons, etc.). This paper describes the performance of the current "state of the art" Speech Recognition System (SRS). The commercially available technology was evaluated as an application for possible inclusion in commercial aircraft flight decks as a crew-to-vehicle interface. Specifically, the technology is to be used as an interface from aircrew to the onboard displays, controls, and flight management tasks. A flight test of a SRS as well as a laboratory test was conducted.

  5. Design Concept of Human Interface System for Risk Monitoring for Proactive Trouble Prevention

    DEFF Research Database (Denmark)

    Hidekazu, Yoshikawa; Ming, Yang; Zhijian, Zhang

    2011-01-01

    A new concept is first proposed of distributed human interface system to integrate both operation and maintenance of nuclear power plant. Then, a method of constructing human interface system is introduced by integrating the plant knowledge database system based on Multilevel Flow Model (MFM......) with the risk monitor to watch Defense-in Depth plant safety functions. The proposed concept is applied for a liquid metal fast reactor Monju and necessary R&D subjects are reviewed to realize human interface system for the maintenance work in Monju plant. Because of using high temperature liquid sodium...... as reactor coolant in Monju plant, the maintenance for Monju should utilize more automated equipments of remote control and robotics than that of light water reactor. It is necessary to design optimum task allocation between human and automated machine as the requisites for good communication design of human...

  6. LEARNING COMMUNICATION AND INTERFACE IN COMPUTER-BASED EDUCATION SYSTEMS AND ENVIRONMENTS

    Directory of Open Access Journals (Sweden)

    Sergey F. Sergeev

    2014-01-01

    Full Text Available In present article we discuss theoretical and practical aspects of learning communication, as well as practical questions of learning systems human interfaces problem. We show the history of the problem, theoretical, methodological, psychological, and technological aspects of learning communication and interfaces, as well as some distinguished ways of solving the problem in classical, non-classical and post non-classical engineering psychology and ergonomics. We present the complex model of orienting cooperation to explain the operational-closed systems (includes the self-organizing human consciousness systems

  7. Design and development of data glove based on printed polymeric sensors and Zigbee networks for Human-Computer Interface.

    Science.gov (United States)

    Tongrod, Nattapong; Lokavee, Shongpun; Watthanawisuth, Natthapol; Tuantranont, Adisorn; Kerdcharoen, Teerakiat

    2013-03-01

    Current trends in Human-Computer Interface (HCI) have brought on a wave of new consumer devices that can track the motion of our hands. These devices have enabled more natural interfaces with computer applications. Data gloves are commonly used as input devices, equipped with sensors that detect the movements of hands and communication unit that interfaces those movements with a computer. Unfortunately, the high cost of sensor technology inevitably puts some burden to most general users. In this research, we have proposed a low-cost data glove concept based on printed polymeric sensor to make pressure and bending sensors fabricated by a consumer ink-jet printer. These sensors were realized using a conductive polymer (poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) [PEDOT:PSS]) thin film printed on glossy photo paper. Performance of these sensors can be enhanced by addition of dimethyl sulfoxide (DMSO) into the aqueous dispersion of PEDOT:PSS. The concept of surface resistance was successfully adopted for the design and fabrication of sensors. To demonstrate the printed sensors, we constructed a data glove using such sensors and developed software for real time hand tracking. Wireless networks based on low-cost Zigbee technology were used to transfer data from the glove to a computer. To our knowledge, this is the first report on low cost data glove based on paper pressure sensors. This low cost implementation of both sensors and communication network as proposed in this paper should pave the way toward a widespread implementation of data glove for real-time hand tracking applications.

  8. Hybrid systems: a real-time interface to control engineering

    DEFF Research Database (Denmark)

    Eriksen, Thomas Juul; Heilmann, Søren; Holdgaard, Michael

    1996-01-01

    An important application area for real time computing is embedded systems where the computing system provides intelligent control of a mechanical, chemical etc. plant or device. The software requirements for such applications depend heavily on the properties of the plant. These properties...

  9. Implementing ETC System on Hungarian Motorway Network

    Directory of Open Access Journals (Sweden)

    Katalin Tanczos

    2006-01-01

    Full Text Available Question of transport infrastructure charges - among others- covers calculation and allocation of infrastructure costsreferring different users. Cost allocation forms the basis of settingthe user charges. The reason for the existence of applyingmileage-proportional pricing system is generally accepted, asthe European regulations also discuss this topic seriously. Thismileage-proportional pricing system demands an appropriatetoll collecting system, which meets the requirements of arrangedprinciples. Among these, the most important principlesare equity, effectiveness and efficiency. Electronic Toll Collecting(ETC systems are an appropriate solution to solvingcharging problems in various ways according to the differentkind of systems. In Hungary the current motorway charging systemis not an adequate solution for success of these principlesin the long-term. A new, mileage-proportional pricing system isbeing initiated. This study presents the plans of HungarianETC system for motorway network, focusing on introductoryissues. Among several preparatory steps, examining acceptabilitybarriers of ETC system for the stakeholders of transport isneeded. Their problem perception is to satisfy their- often contrary-demands in equal, fair and effective ways. The policy implementationprocess also plays an important role to generatesufficient conditions to implement this solution. This contributionis to discuss these objectives in applying the ETC system inan acceptable way.

  10. Man-machine interface analysis of the flight design system

    Science.gov (United States)

    Ramsey, H. R.; Atwood, M. E.; Willoughby, J. K.

    1978-01-01

    The objective of the current effort was to perform a broad analysis of the human factors issues involved in the design of the Flight Design System (FDS). The analysis was intended to include characteristics of the system itself, such as: (1) basic structure and functional capabilities of FDS; (2) user backgrounds, capabilities, and possible modes of use; (3) FDS interactive dialogue, problem solving aids; (4) system data management capabilities; and to include, as well, such system related matters as: (1) flight design team structure; (2) roles of technicians; (3) user training; and (4) methods of evaluating system performance. Wherever possible, specific recommendations are made. In other cases, the issues which seem most important are identified. In some cases, additional analyses or experiments which might provide resolution are suggested.

  11. Anomalous system-size dependence of electrolytic cells with an electrified oil-water interface.

    Science.gov (United States)

    Westbroek, Marise; Boon, Niels; van Roij, René

    2015-10-14

    Manipulation of the charge of the dielectric interface between two bulk liquids not only enables the adjustment of the interfacial tension but also controls the storage capacity of ions in the ionic double layers adjacent to each side of the interface. However, adjusting this interfacial charge by static external electric fields is difficult since the external electric fields are readily screened by ionic double layers that form in the vicinity of the external electrodes. This leaves the liquid-liquid interface, which is at a macroscopic distance from the electrodes, unaffected. In this study we show theoretically, in agreement with recent experiments, that control over this surface charge at the liquid-liquid interface is nonetheless possible for macroscopically large but finite closed systems in equilibrium, even when the distance between the electrode and interface is orders of magnitude larger than the Debye screening lengths of the two liquids. We identify a crossover system-size below which the interface and the electrodes are effectively coupled. Our calculations of the interfacial tension for various electrode potentials are in good agreement with recent experimental data.

  12. Dynamic Brain-Machine Interface: a novel paradigm for bidirectional interaction between brains and dynamical systems.

    Science.gov (United States)

    Szymanski, Francois D; Semprini, Marianna; Mussa-Ivaldi, Ferdinando A; Fadiga, Luciano; Panzeri, Stefano; Vato, Alessandro

    2011-01-01

    Brain-Machine Interfaces (BMIs) are systems which mediate communication between brains and artificial devices. Their long term goal is to restore motor functions, and this ultimately demands the development of a new generation of bidirectional brain-machine interfaces establishing a two-way brain-world communication channel, by both decoding motor commands from neural activity and providing feedback to the brain by electrical stimulation. Taking inspiration from how the spinal cord of vertebrates mediates communication between the brain and the limbs, here we present a model of a bidirectional brain-machine interface that interacts with a dynamical system by generating a control policy in the form of a force field. In our model, bidirectional communication takes place via two elements: (a) a motor interface decoding activities recorded from a motor cortical area, and (b) a sensory interface encoding the state of the controlled device into electrical stimuli delivered to a somatosensory area. We propose a specific mathematical model of the sensory and motor interfaces guiding a point mass moving in a viscous medium, and we demonstrate its performance by testing it on realistically simulated neural responses.

  13. Towards passive brain-computer interfaces: applying brain-computer interface technology to human-machine systems in general.

    Science.gov (United States)

    Zander, Thorsten O; Kothe, Christian

    2011-04-01

    Cognitive monitoring is an approach utilizing realtime brain signal decoding (RBSD) for gaining information on the ongoing cognitive user state. In recent decades this approach has brought valuable insight into the cognition of an interacting human. Automated RBSD can be used to set up a brain-computer interface (BCI) providing a novel input modality for technical systems solely based on brain activity. In BCIs the user usually sends voluntary and directed commands to control the connected computer system or to communicate through it. In this paper we propose an extension of this approach by fusing BCI technology with cognitive monitoring, providing valuable information about the users' intentions, situational interpretations and emotional states to the technical system. We call this approach passive BCI. In the following we give an overview of studies which utilize passive BCI, as well as other novel types of applications resulting from BCI technology. We especially focus on applications for healthy users, and the specific requirements and demands of this user group. Since the presented approach of combining cognitive monitoring with BCI technology is very similar to the concept of BCIs itself we propose a unifying categorization of BCI-based applications, including the novel approach of passive BCI.

  14. Network Traffic Features for Anomaly Detection in Specific Industrial Control System Network

    Directory of Open Access Journals (Sweden)

    Matti Mantere

    2013-09-01

    Full Text Available The deterministic and restricted nature of industrial control system networks sets them apart from more open networks, such as local area networks in office environments. This improves the usability of network security, monitoring approaches that would be less feasible in more open environments. One of such approaches is machine learning based anomaly detection. Without proper customization for the special requirements of the industrial control system network environment, many existing anomaly or misuse detection systems will perform sub-optimally. A machine learning based approach could reduce the amount of manual customization required for different industrial control system networks. In this paper we analyze a possible set of features to be used in a machine learning based anomaly detection system in the real world industrial control system network environment under investigation. The network under investigation is represented by architectural drawing and results derived from network trace analysis. The network trace is captured from a live running industrial process control network and includes both control data and the data flowing between the control network and the office network. We limit the investigation to the IP traffic in the traces.

  15. Evaluation of a Cyber Security System for Hospital Network.

    Science.gov (United States)

    Faysel, Mohammad A

    2015-01-01

    Most of the cyber security systems use simulated data in evaluating their detection capabilities. The proposed cyber security system utilizes real hospital network connections. It uses a probabilistic data mining algorithm to detect anomalous events and takes appropriate response in real-time. On an evaluation using real-world hospital network data consisting of incoming network connections collected for a 24-hour period, the proposed system detected 15 unusual connections which were undetected by a commercial intrusion prevention system for the same network connections. Evaluation of the proposed system shows a potential to secure protected patient health information on a hospital network.

  16. Human Factors Interface with Systems Engineering for NASA Human Spaceflights

    Science.gov (United States)

    Wong, Douglas T.

    2009-01-01

    This paper summarizes the past and present successes of the Habitability and Human Factors Branch (HHFB) at NASA Johnson Space Center s Space Life Sciences Directorate (SLSD) in including the Human-As-A-System (HAAS) model in many NASA programs and what steps to be taken to integrate the Human-Centered Design Philosophy (HCDP) into NASA s Systems Engineering (SE) process. The HAAS model stresses systems are ultimately designed for the humans; the humans should therefore be considered as a system within the systems. Therefore, the model places strong emphasis on human factors engineering. Since 1987, the HHFB has been engaging with many major NASA programs with much success. The HHFB helped create the NASA Standard 3000 (a human factors engineering practice guide) and the Human Systems Integration Requirements document. These efforts resulted in the HAAS model being included in many NASA programs. As an example, the HAAS model has been successfully introduced into the programmatic and systems engineering structures of the International Space Station Program (ISSP). Success in the ISSP caused other NASA programs to recognize the importance of the HAAS concept. Also due to this success, the HHFB helped update NASA s Systems Engineering Handbook in December 2007 to include HAAS as a recommended practice. Nonetheless, the HAAS model has yet to become an integral part of the NASA SE process. Besides continuing in integrating HAAS into current and future NASA programs, the HHFB will investigate incorporating the Human-Centered Design Philosophy (HCDP) into the NASA SE Handbook. The HCDP goes further than the HAAS model by emphasizing a holistic and iterative human-centered systems design concept.

  17. Virtual Social Networks Online and Mobile Systems

    Directory of Open Access Journals (Sweden)

    Maytham Safar

    2009-01-01

    Full Text Available Location-based applications are one of the most anticipated new segments of the mobile industry. These new applications are enabled by GPS-equipped phones (e.g., emergency applications, buddy finders, games, location-based advertising, etc.. These services are designed to give consumers instant access to personalized, local content of their immediate location. Some applications couple LBS with notification services, automatically alerting users when they are close to a pre-selected destination. With the advances in the Internet and communications/mobile technology, it became vital to analyze the effect of such technologies on human communications. This work studies how humans can construct social networks as a method for group communications using the available technologies. We constructed and analyzed a friends network using different parameters. The parameters that were calculated to analyze the network are the distribution sequence, characteristic path length, clustering coefficient and centrality measures. In addition, we built a PDA application that implements the concept of LBS using two system modules. In the first module, we have developed an application for entertainment purpose; an application program which enables end users to send their birth year and get their horoscope in return. The second part of the project was, to build an application, which helps people to stay in touch with their friends and family members (Find Friend. It helps users to find which of their buddies are within the same area they are in.

  18. Multilingual interfaces for parallel coupling in multiphysics and multiscale systems.

    Energy Technology Data Exchange (ETDEWEB)

    Ong, E. T.; Larson, J. W.; Norris, B.; Jacob, R. L.; Tobis, M.; Steder, M.; Mathematics and Computer Science; Univ. of Wisconsin; Australian National Univ.; Univ. of Chicago

    2007-01-01

    Multiphysics and multiscale simulation systems are emerging as a new grand challenge in computational science, largely because of increased computing power provided by the distributed-memory parallel programming model on commodity clusters. These systems often present a parallel coupling problem in their intercomponent data exchanges. Another potential problem in these coupled systems is language interoperability between their various constituent codes. In anticipation of combined parallel coupling/language interoperability challenges, we have created a set of interlanguage bindings for a successful parallel coupling library, the Model Coupling Toolkit. We describe the method used for automatically generating the bindings using the Babel language interoperability tool, and illustrate with short examples how MCT can be used from the C++ and Python languages. We report preliminary performance reports for the MCT interpolation benchmark. We conclude with a discussion of the significance of this work to the rapid prototyping of large parallel coupled systems.

  19. Integrated design of intelligent surveillance systems and their user interface

    NARCIS (Netherlands)

    Toet, A.

    2005-01-01

    Modern complex surveillance systems consisting of multiple and heterogeneous sensors, automatic information registration and data analysis techniques, and decision support tools should provide the human operator an integrated, transparent and easily comprehensible view of the surveyed scene.

  20. Design and evaluation of a wireless sensor network based aircraft strength testing system.

    Science.gov (United States)

    Wu, Jian; Yuan, Shenfang; Zhou, Genyuan; Ji, Sai; Wang, Zilong; Wang, Yang

    2009-01-01

    The verification of aerospace structures, including full-scale fatigue and static test programs, is essential for structure strength design and evaluation. However, the current overall ground strength testing systems employ a large number of wires for communication among sensors and data acquisition facilities. The centralized data processing makes test programs lack efficiency and intelligence. Wireless sensor network (WSN) technology might be expected to address the limitations of cable-based aeronautical ground testing systems. This paper presents a wireless sensor network based aircraft strength testing (AST) system design and its evaluation on a real aircraft specimen. In this paper, a miniature, high-precision, and shock-proof wireless sensor node is designed for multi-channel strain gauge signal conditioning and monitoring. A cluster-star network topology protocol and application layer interface are designed in detail. To verify the functionality of the designed wireless sensor network for strength testing capability, a multi-point WSN based AST system is developed for static testing of a real aircraft undercarriage. Based on the designed wireless sensor nodes, the wireless sensor network is deployed to gather, process, and transmit strain gauge signals and monitor results under different static test loads. This paper shows the efficiency of the wireless sensor network based AST system, compared to a conventional AST system.

  1. Design and Evaluation of a Wireless Sensor Network Based Aircraft Strength Testing System

    Directory of Open Access Journals (Sweden)

    Yang Wang

    2009-06-01

    Full Text Available The verification of aerospace structures, including full-scale fatigue and static test programs, is essential for structure strength design and evaluation. However, the current overall ground strength testing systems employ a large number of wires for communication among sensors and data acquisition facilities. The centralized data processing makes test programs lack efficiency and intelligence. Wireless sensor network (WSN technology might be expected to address the limitations of cable-based aeronautical ground testing systems. This paper presents a wireless sensor network based aircraft strength testing (AST system design and its evaluation on a real aircraft specimen. In this paper, a miniature, high-precision, and shock-proof wireless sensor node is designed for multi-channel strain gauge signal conditioning and monitoring. A cluster-star network topology protocol and application layer interface are designed in detail. To verify the functionality of the designed wireless sensor network for strength testing capability, a multi-point WSN based AST system is developed for static testing of a real aircraft undercarriage. Based on the designed wireless sensor nodes, the wireless sensor network is deployed to gather, process, and transmit strain gauge signals and monitor results under different static test loads. This paper shows the efficiency of the wireless sensor network based AST system, compared to a conventional AST system.

  2. Interface design for an audio based information retrieval system

    OpenAIRE

    Johnson, James Robert

    1992-01-01

    This project involves a telephone-based information retrieval system. Users interact with the computer by pressing buttons on a telephone keypad and listening to the computer respond by way of a speech synthesizer. The purpose of this project is to redesign and revise an existing information retrieval system. The goals of this project include simplifying the job of the menu designer and providing a way so experience can aid users to perform a given task faster than previously possible. Key...

  3. Interlaced, Nanostructured Interface with Graphene Buffer Layer Reduces Thermal Boundary Resistance in Nano/Microelectronic Systems.

    Science.gov (United States)

    Tao, Lei; Theruvakkattil Sreenivasan, Sreeprasad; Shahsavari, Rouzbeh

    2017-01-11

    Improving heat transfer in hybrid nano/microelectronic systems is a challenge, mainly due to the high thermal boundary resistance (TBR) across the interface. Herein, we focus on gallium nitride (GaN)/diamond interface-as a model system with various high power, high temperature, and optoelectronic applications-and perform extensive reverse nonequilibrium molecular dynamics simulations, decoding the interplay between the pillar length, size, shape, hierarchy, density, arrangement, system size, and the interfacial heat transfer mechanisms to substantially reduce TBR in GaN-on-diamond devices. We found that changing the conventional planar interface to nanoengineered, interlaced architecture with optimal geometry results in >80% reduction in TBR. Moreover, introduction of conformal graphene buffer layer further reduces the TBR by ∼33%. Our findings demonstrate that the enhanced generation of intermediate frequency phonons activates the dominant group velocities, resulting in reduced TBR. This work has important implications on experimental studies, opening up a new space for engineering hybrid nano/microelectronics.

  4. Four Principles for User Interface Design of Computerised Clinical Decision Support Systems

    DEFF Research Database (Denmark)

    Kanstrup, Anne Marie; Christiansen, Marion Berg; Nøhr, Christian

    2011-01-01

    Abstract.  The paper presents results from design of a user interface for a Computerised Clinical Decision Support System (CSSS). The ambition has been to design Human-Computer Interaction that can minimise medication errors. Through an iterative design process a digital prototype for prescription...... emphasises a focus on how users interact with the system, a focus on how information is provided by the system, and four principles of interaction. The four principles for design of user interfaces for CDSS are summarised as four A’s: All in one, At a glance, At hand and Attention. It is recommended that all...... four interaction principles are integrated in the design of user interfaces for CDSS, i.e. the model is an integrated model which we suggest as a guide for interaction design when working with preventing medication errors....

  5. Atomistic study on the FCC/BCC interface structure with {112}KS orientation

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Keonwook [Los Alamos National Laboratory; Beyerlein, Irene [Los Alamos National Laboratory

    2011-09-23

    In this study, atomistic simulation is used to explore the atomic interface structure, the intrinsic defect network, and mechanism of twin formation from the {112}KS Cu-Nb interface. The interface structure of different material systems AI-Fe and AI-Nb are also compared with Cu-Nb interface.

  6. Control and Optimization of Network in Networked Control System

    Directory of Open Access Journals (Sweden)

    Wang Zhiwen

    2014-01-01

    Full Text Available In order to avoid quality of performance (QoP degradation resulting from quality of service (QoS, the solution to network congestion from the point of control theory, which marks departure of our results from the existing methods, is proposed in this paper. The congestion and bandwidth are regarded as state and control variables, respectively; then, the linear time-invariant (LTI model between congestion state and bandwidth of network is established. Consequently, linear quadratic method is used to eliminate the network congestion by allocating bandwidth dynamically. At last, numerical simulation results are given to illustrate the effectiveness of this modeling approach.

  7. Context-specific protein network miner - an online system for exploring context-specific protein interaction networks from the literature

    KAUST Repository

    Chowdhary, Rajesh

    2012-04-06

    Background: Protein interaction networks (PINs) specific within a particular context contain crucial information regarding many cellular biological processes. For example, PINs may include information on the type and directionality of interaction (e.g. phosphorylation), location of interaction (i.e. tissues, cells), and related diseases. Currently, very few tools are capable of deriving context-specific PINs for conducting exploratory analysis. Results: We developed a literature-based online system, Context-specific Protein Network Miner (CPNM), which derives context-specific PINs in real-time from the PubMed database based on a set of user-input keywords and enhanced PubMed query system. CPNM reports enriched information on protein interactions (with type and directionality), their network topology with summary statistics (e.g. most densely connected proteins in the network; most densely connected protein-pairs; and proteins connected by most inbound/outbound links) that can be explored via a user-friendly interface. Some of the novel features of the CPNM system include PIN generation, ontology-based PubMed query enhancement, real-time, user-queried, up-to-date PubMed document processing, and prediction of PIN directionality. Conclusions: CPNM provides a tool for biologists to explore PINs. It is freely accessible at http://www.biotextminer.com/CPNM/. © 2012 Chowdhary et al.

  8. Design of special purpose database for credit cooperation bank business processing network system

    Science.gov (United States)

    Yu, Yongling; Zong, Sisheng; Shi, Jinfa

    2011-12-01

    With the popularization of e-finance in the city, the construction of e-finance is transfering to the vast rural market, and quickly to develop in depth. Developing the business processing network system suitable for the rural credit cooperative Banks can make business processing conveniently, and have a good application prospect. In this paper, We analyse the necessity of adopting special purpose distributed database in Credit Cooperation Band System, give corresponding distributed database system structure , design the specical purpose database and interface technology . The application in Tongbai Rural Credit Cooperatives has shown that system has better performance and higher efficiency.

  9. Handbook of sensor networks compact wireless and wired sensing systems

    CERN Document Server

    Ilyas, Mohammad

    2004-01-01

    INTRODUCTION Opportunities and Challenges in Wireless Sensor Networks, M. Haenggi, Next Generation Technologies to Enable Sensor Networks, J. I.  Goodman, A. I. Reuther, and D. R. Martinez Sensor Networks Management, L. B. Ruiz, J. M. Nogueira, and A. A. F. Loureiro Models for Programmability in Sensor Networks, A. Boulis Miniaturizing Sensor Networks with MEMS, Brett Warneke A Taxonomy of Routing Techniques in Wireless Sensor Networks, J. N. Al-Karaki and A. E. Kamal Artificial Perceptual Systems, A. Loutfi, M. Lindquist, and P. Wide APPLICATIONS Sensor Network Architecture and Appl

  10. Interfacing knowledge systems: Local knowledge and science in Africa

    African Journals Online (AJOL)

    In this article, with reference to Ghana and Zimbabwe, we explore the traditional African worldview, life-world, belief systems and ways of thinking and reasoning. This discourse captures the rich combination of spirituality, materiality and the social in a concept referred to here as Cosmo vision. Nowadays this worldview ...

  11. IGDS/TRAP Interface Program (ITIP). Software User Manual (SUM). [network flow diagrams for coal gasification studies

    Science.gov (United States)

    Jefferys, S.; Johnson, W.; Lewis, R.; Rich, R.

    1981-01-01

    This specification establishes the requirements, concepts, and preliminary design for a set of software known as the IGDS/TRAP Interface Program (ITIP). This software provides the capability to develop at an Interactive Graphics Design System (IGDS) design station process flow diagrams for use by the NASA Coal Gasification Task Team. In addition, ITIP will use the Data Management and Retrieval System (DMRS) to maintain a data base from which a properly formatted input file to the Time-Line and Resources Analysis Program (TRAP) can be extracted. This set of software will reside on the PDP-11/70 and will become the primary interface between the Coal Gasification Task Team and IGDS, DMRS, and TRAP. The user manual for the computer program is presented.

  12. Development of utility system of charged particle Nuclear Reaction Data on Unified Interface

    Energy Technology Data Exchange (ETDEWEB)

    Aoyama, Shigeyoshi; Ohbayashi, Yosihide; Kato, Kiyoshi [Information Processing Center, Kitami Institute of Technology, Kitami, Hokkaido (Japan); Masui, Hiroshi; Ohnishi, Akira; Chiba, Masaki

    1999-03-01

    We have developed a utility system, WinNRDF, for a nuclear charged particle reaction data of NRDF (Nuclear Reaction Data File) on a unified interface of Windows95, 98/NT. By using the system, we can easily search the experimental data of a charged particle reaction in NRDF and also see the graphic data on GUI (Graphical User Interface). Furthermore, we develop a mechanism of making a new index of keywords in order to include the time developing character of the NRDF database. (author)

  13. AN AUTOMATED NETWORK SECURITYCHECKING AND ALERT SYSTEM: A NEW FRAMEWORK

    Directory of Open Access Journals (Sweden)

    Vivek Kumar Yadav

    2013-09-01

    Full Text Available Network security checking is a vital process to assess and to identify weaknesses in network for management of security. Insecure entry points of a network provide attackers an easy target to access and compromise. Open ports of network components such as firewalls, gateways and end systems are analogues to open gates of a building through which any one can get into. Network scanning is performed to identify insecure entry points in the network components. To find out vulnerabilities on these points vulnerability assessment is performed. So security checking consists of both activities- network scanning as well as vulnerability assessment. A single tool used for the security checking may not give reliable results. This paper presents a framework for assessing the security of a network using multiple Network Scanning and Vulnerability Assessment tools. The proposed framework is an extension of the framework given by Jun Yoon and Wontae Sim [1] which performs vulnerability scanning only. The framework presented here adds network scanning, alerting and reporting system to their framework. Network scanning and vulnerability tools together complement each other and make it amenable for centralized control and management. The reporting system of framework sends an email to the network administrator which contains detailed report (as attachment of security checking process. Alerting system sends a SMS message as an alert to the network administrator in case of severe threats found in the network. Initial results of the framework are encouraging and further work is in progress.

  14. An Asynchronous Time-Division-Multiplexed Network-on-Chip for Real-Time Systems

    DEFF Research Database (Denmark)

    Kasapaki, Evangelia

    Multi-processor architectures using networks-on-chip (NOCs) for communication are becoming the standard approach in the development of embedded systems and general purpose platforms. Typically, multi-processor platforms follow a globally asynchronous locally synchronous (GALS) timing organization...... more flexible timing within its structure, to address signal distribution issues, using a network of synchronous routers. NOCs consist of a switching structure of routers connected by links, with network interfaces (NIs) that connect the processors to the switching structure. Argo uses a novel NI...... design that supports time-predictability, and asynchronous routers that form a time-elastic network. The NI design integrates the DMA functionality and the TDM schedule, and uses dual-ported local memories. The routers combine the router functionality and asynchronous elastic behavior. They also use...

  15. Introducing network Gramians to undirected network systems for structure-preserving model reduction

    NARCIS (Netherlands)

    Cheng, Xiaodong; Scherpen, Jacquelien M.A.

    2016-01-01

    In this paper, we propose the notion of controllability Gramian for linear network systems. In contrast to the conventional Gramians defined for asymptotically stable systems, the new Gramian is generalized to semi-stable systems and can be computed for network systems with imaginary axis poles. We

  16. Advances in dynamic network modeling in complex transportation systems

    CERN Document Server

    Ukkusuri, Satish V

    2013-01-01

    This book focuses on the latest in dynamic network modeling, including route guidance and traffic control in transportation systems and other complex infrastructure networks. Covers dynamic traffic assignment, flow modeling, mobile sensor deployment and more.

  17. A network-based dynamical ranking system for competitive sports

    National Research Council Canada - National Science Library

    Motegi, Shun; Masuda, Naoki

    2012-01-01

    From the viewpoint of networks, a ranking system for players or teams in sports is equivalent to a centrality measure for sports networks, whereby a directed link represents the result of a single game...

  18. Implications of the Dependence of Neuronal Activity on Neural Network States for the Design of Brain-Machine Interfaces.

    Science.gov (United States)

    Panzeri, Stefano; Safaai, Houman; De Feo, Vito; Vato, Alessandro

    2016-01-01

    Brain-machine interfaces (BMIs) can improve the quality of life of patients with sensory and motor disabilities by both decoding motor intentions expressed by neural activity, and by encoding artificially sensed information into patterns of neural activity elicited by causal interventions on the neural tissue. Yet, current BMIs can exchange relatively small amounts of information with the brain. This problem has proved difficult to overcome by simply increasing the number of recording or stimulating electrodes, because trial-to-trial variability of neural activity partly arises from intrinsic factors (collectively known as the network state) that include ongoing spontaneous activity and neuromodulation, and so is shared among neurons. Here we review recent progress in characterizing the state dependence of neural responses, and in particular of how neural responses depend on endogenous slow fluctuations of network excitability. We then elaborate on how this knowledge may be used to increase the amount of information that BMIs exchange with brain. Knowledge of network state can be used to fine-tune the stimulation pattern that should reliably elicit a target neural response used to encode information in the brain, and to discount part of the trial-by-trial variability of neural responses, so that they can be decoded more accurately.

  19. Changes in cortical network connectivity with long-term brain-machine interface exposure after chronic amputation.

    Science.gov (United States)

    Balasubramanian, Karthikeyan; Vaidya, Mukta; Southerland, Joshua; Badreldin, Islam; Eleryan, Ahmed; Takahashi, Kazutaka; Qian, Kai; Slutzky, Marc W; Fagg, Andrew H; Oweiss, Karim; Hatsopoulos, Nicholas G

    2017-11-27

    Studies on neural plasticity associated with brain-machine interface (BMI) exposure have primarily documented changes in single neuron activity, and largely in intact subjects. Here, we demonstrate significant changes in ensemble-level functional connectivity among primary motor cortical (MI) neurons of chronically amputated monkeys exposed to control a multiple-degree-of-freedom robot arm. A multi-electrode array was implanted in M1 contralateral or ipsilateral to the amputation in three animals. Two clusters of stably recorded neurons were arbitrarily assigned to control reach and grasp movements, respectively. With exposure, network density increased in a nearly monotonic fashion in the contralateral monkeys, whereas the ipsilateral monkey pruned the existing network before re-forming a denser connectivity. Excitatory connections among neurons within a cluster were denser, whereas inhibitory connections were denser among neurons across the two clusters. These results indicate that cortical network connectivity can be modified with BMI learning, even among neurons that have been chronically de-efferented and de-afferented due to amputation.

  20. Implications of the dependence of neuronal activity on neural network states for the design of brain-machine interfaces

    Directory of Open Access Journals (Sweden)

    Stefano ePanzeri

    2016-04-01

    Full Text Available Brain-machine interfaces (BMIs can improve the quality of life of patients with sensory and motor disabilities by both decoding motor intentions expressed by neural activity, and by encoding artificially sensed information into patterns of neural activity elicited by causal interventions on the neural tissue. Yet, current BMIs can exchange relatively small amounts of information with the brain. This problem has proved difficult to overcome by simply increasing the number of recording or stimulating electrodes, because trial-to-trial variability of neural activity partly arises from intrinsic factors (collectively known as the network state that include ongoing spontaneous activity and neuromodulation, and so is shared among neurons. Here we review recent progress in characterizing the state dependence of neural responses, and in particular of how neural responses depend on endogenous slow fluctuations of network excitability. We then elaborate on how this knowledge may be used to increase the amount of information that BMIs exchange with brains. Knowledge of network state can be used to fine-tune the stimulation pattern that should reliably elicit a target neural response used to encode information in the brain, and to discount part of the trial-by-trial variability of neural responses, so that they can be decoded more accurately.

  1. Modeling power electronics and interfacing energy conversion systems

    CERN Document Server

    Simões, Marcelo Godoy

    2017-01-01

    Discusses the application of mathematical and engineering tools for modeling, simulation and control oriented for energy systems, power electronics and renewable energy. This book builds on the background knowledge of electrical circuits, control of dc/dc converters and inverters, energy conversion and power electronics. The book shows readers how to apply computational methods for multi-domain simulation of energy systems and power electronics engineering problems. Each chapter has a brief introduction on the theoretical background, a description of the problems to be solved, and objectives to be achieved. Block diagrams, electrical circuits, mathematical analysis or computer code are covered. Each chapter concludes with discussions on what should be learned, suggestions for further studies and even some experimental work.

  2. High-Level Waste System Process Interface Description

    Energy Technology Data Exchange (ETDEWEB)

    d' Entremont, P.D.

    1999-01-14

    The High-Level Waste System is a set of six different processes interconnected by pipelines. These processes function as one large treatment plant that receives, stores, and treats high-level wastes from various generators at SRS and converts them into forms suitable for final disposal. The three major forms are borosilicate glass, which will be eventually disposed of in a Federal Repository, Saltstone to be buried on site, and treated water effluent that is released to the environment.

  3. Interfacing Hardware Accelerators to a Time-Division Multiplexing Network-on-Chip

    DEFF Research Database (Denmark)

    Pezzarossa, Luca; Sørensen, Rasmus Bo; Schoeberl, Martin

    2015-01-01

    This paper addresses the integration of stateless hardware accelerators into time-predictable multi-core platforms based on time-division multiplexing networks-on-chip. Stateless hardware accelerators, like floating-point units, are typically attached as co-processors to individual processors...... in the platform. Our design takes a different approach and connects the hardware accelerators to the network-on-chip in the same way as processor cores. Each processor that uses a hardware accelerator is assigned a virtual channel for sending instructions to the hardware accelerator and a virtual channel...

  4. Fluid Interfaces

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius

    2001-01-01

    Fluid interaction, interaction by the user with the system that causes few breakdowns, is essential to many user interfaces. We present two concrete software systems that try to support fluid interaction for different work practices. Furthermore, we present specificity, generality, and minimality...... as design goals for fluid interfaces....

  5. Streamflow forecasting using the modular modeling system and an object-user interface

    Science.gov (United States)

    Jeton, A.E.

    2001-01-01

    The U.S. Geological Survey (USGS), in cooperation with the Bureau of Reclamation (BOR), developed a computer program to provide a general framework needed to couple disparate environmental resource models and to manage the necessary data. The Object-User Interface (OUI) is a map-based interface for models and modeling data. It provides a common interface to run hydrologic models and acquire, browse, organize, and select spatial and temporal data. One application is to assist river managers in utilizing streamflow forecasts generated with the Precipitation-Runoff Modeling System running in the Modular Modeling System (MMS), a distributed-parameter watershed model, and the National Weather Service Extended Streamflow Prediction (ESP) methodology.

  6. Optimal Power System and Grid Interface Design Considerations for the CLICs Klystron Modulators

    CERN Document Server

    Marija, Jankovic; Jon, Clare; Pat, Wheeler; Davide, Aguglia

    2015-01-01

    The Compact Linear Collider (CLIC) is an electron-positron collider under study at CERN with the aim to explore the next generation of high precision/high energy particles physics. The CLIC’s drive beams will be accelerated by approximately 1300 klystrons, requiring highly efficient and controllable solid state capacitor discharge modulators. Capacitor charger specifications include the requirement to mask the pulsed effect of the load from the utility grid, ensure maximum power quality, control the derived DC voltage precisely (to maximize accuracy for the modulators being implemented), and achieve high efficiency and operability of the overall power system. This paper presents the work carried out on the power system interface for the CLIC facility. In particular it discusses the challenges on the utility interface and analysis of the grid interface converters with regards to required functionality, efficiency, and control methodologies.

  7. Molten Salt Test Loop (MSTL) system customer interface document.

    Energy Technology Data Exchange (ETDEWEB)

    Gill, David Dennis; Kolb, William J.; Briggs, Ronald D.

    2013-09-01

    The National Solar Thermal Test Facility at Sandia National Laboratories has a unique test capability called the Molten Salt Test Loop (MSTL) system. MSTL is a test capability that allows customers and researchers to test components in flowing, molten nitrate salt. The components tested can range from materials samples, to individual components such as flex hoses, ball joints, and valves, up to full solar collecting systems such as central receiver panels, parabolic troughs, or linear Fresnel systems. MSTL provides realistic conditions similar to a portion of a concentrating solar power facility. The facility currently uses 60/40 nitrate %E2%80%9Csolar salt%E2%80%9D and can circulate the salt at pressure up to 40 bar (600psi), temperature to 585%C2%B0C, and flow rate of 44-50kg/s(400-600GPM) depending on temperature. The purpose of this document is to provide a basis for customers to evaluate the applicability to their testing needs, and to provide an outline of expectations for conducting testing on MSTL. The document can serve as the basis for testing agreements including Work for Others (WFO) and Cooperative Research and Development Agreements (CRADA). While this document provides the basis for these agreements and describes some of the requirements for testing using MSTL and on the site at Sandia, the document is not sufficient by itself as a test agreement. The document, however, does provide customers with a uniform set of information to begin the test planning process.

  8. An artificial immune system algorithm approach for reconfiguring distribution network

    Science.gov (United States)

    Syahputra, Ramadoni; Soesanti, Indah

    2017-08-01

    This paper proposes an artificial immune system (AIS) algorithm approach for reconfiguring distribution network with the presence distributed generators (DG). The distribution network with high-performance is a network that has a low power loss, better voltage profile, and loading balance among feeders. The task for improving the performance of the distribution network is optimization of network configuration. The optimization has become a necessary study with the presence of DG in entire networks. In this work, optimization of network configuration is based on an AIS algorithm. The methodology has been tested in a model of 33 bus IEEE radial distribution networks with and without DG integration. The results have been showed that the optimal configuration of the distribution network is able to reduce power loss and to improve the voltage profile of the distribution network significantly.

  9. Laboratory and numerical investigations of kinetic interface sensitive tracers transport for immiscible two-phase flow porous media systems

    Science.gov (United States)

    Tatomir, Alexandru Bogdan A. C.; Sauter, Martin

    2017-04-01

    A number of theoretical approaches estimating the interfacial area between two fluid phases are available (Schaffer et al.,2013). Kinetic interface sensitive (KIS) tracers are used to describe the evolution of fluid-fluid interfaces advancing in two phase porous media systems (Tatomir et al., 2015). Initially developed to offer answers about the supercritical (sc)CO2 plume movement and the efficiency of trapping in geological carbon storage reservoirs, KIS tracers are tested in dynamic controlled laboratory conditions. N-octane and water, analogue to a scCO2 - brine system, are used. The KIS tracer is dissolved in n-octane, which is injected as the non-wetting phase in a fully water saturated porous media column. The porous system is made up of spherical glass beads with sizes of 100-250 μm. Subsequently, the KIS tracer follows a hydrolysis reaction over the n-octane - water interface resulting in an acid and phenol which are both water soluble. The fluid-fluid interfacial area is described numerically with the help of constitutive-relationships derived from the Brooks-Corey model. The specific interfacial area is determined numerically from pore scale calculations, or from different literature sources making use of pore network model calculations (Joekar-Niasar et al., 2008). This research describes the design of the laboratory setup and compares the break-through curves obtained with the forward model and in the laboratory experiment. Furthermore, first results are shown in the attempt to validate the immiscible two phase flow reactive transport numerical model with dynamic laboratory column experiments. Keywords: Fluid-fluid interfacial area, KIS tracers, model validation, CCS, geological storage of CO2

  10. Assessment of Alternative Interfaces for Manual Commanding of Spacecraft Systems: Compatibility with Flexible Allocation Policies

    Science.gov (United States)

    Billman, Dorrit Owen; Schreckenghost, Debra; Miri, Pardis

    2014-01-01

    Astronauts will be responsible for executing a much larger body of procedures as human exploration moves further from Earth and Mission Control. Efficient, reliable methods for executing these procedures, including manual, automated, and mixed execution will be important. Our interface integrates step-by-step instruction with the means for execution. The research reported here compared manual execution using the new system to a system analogous to the manual-only system currently in use on the International Space Station, to assess whether user performance in manual operations would be as good or better with the new than with the legacy system. The system used also allows flexible automated execution. The system and our data lay the foundation for integrating automated execution into the flow of procedures designed for humans. In our formative study, we found speed and accuracy of manual procedure execution was better using the new, integrated interface over the legacy design.

  11. Analysis of hybrid interface cooling system using air ventilation and nanofluid

    Science.gov (United States)

    Rani, M. F. H.; Razlan, Z. M.; Bakar, S. A.; Desa, H.; Wan, W. K.; Ibrahim, I.; Kamarrudin, N. S.; Bin-Abdun, Nazih A.

    2017-09-01

    The hybrid interface cooling system needs to be designed for maintaining the electric vehicle's battery cell temperature at 25°C. The hybrid interface cooling system is a combination of two individual systems, where the primary cooling system (R-134a) and the secondary cooling system (CuO + Water) will be used to absorb the heat generated by the battery cells. The ventilation system is designed using air as the medium to transfer the heat from the batteries to the refrigeration system (R-134a). Research will focus on determining the suitable compressor displacement, the heat exchanger volume and the expansion valve resistance value. The analysis for the secondary cooling system is focused on the cooling coil where low temperature nanofluid is passing through each interval of the battery cells. For analysing purposes, the thermal properties of the mixture of 50 grams, Copper (II) Oxide and the base fluid have been determined. The hybrid interface cooling system are able to achieve 57.82% increments in term of rate of heat transfer as compared to the individual refrigeration system.

  12. General MACOS Interface for Modeling and Analysis for Controlled Optical Systems

    Science.gov (United States)

    Sigrist, Norbert; Basinger, Scott A.; Redding, David C.

    2012-01-01

    The General MACOS Interface (GMI) for Modeling and Analysis for Controlled Optical Systems (MACOS) enables the use of MATLAB as a front-end for JPL s critical optical modeling package, MACOS. MACOS is JPL s in-house optical modeling software, which has proven to be a superb tool for advanced systems engineering of optical systems. GMI, coupled with MACOS, allows for seamless interfacing with modeling tools from other disciplines to make possible integration of dynamics, structures, and thermal models with the addition of control systems for deformable optics and other actuated optics. This software package is designed as a tool for analysts to quickly and easily use MACOS without needing to be an expert at programming MACOS. The strength of MACOS is its ability to interface with various modeling/development platforms, allowing evaluation of system performance with thermal, mechanical, and optical modeling parameter variations. GMI provides an improved means for accessing selected key MACOS functionalities. The main objective of GMI is to marry the vast mathematical and graphical capabilities of MATLAB with the powerful optical analysis engine of MACOS, thereby providing a useful tool to anyone who can program in MATLAB. GMI also improves modeling efficiency by eliminating the need to write an interface function for each task/project, reducing error sources, speeding up user/modeling tasks, and making MACOS well suited for fast prototyping.

  13. Technical Aspects of Interfacing MUMPS to an External SQL Relational Database Management System

    Science.gov (United States)

    Kuzmak, Peter M.; Walters, Richard F.; Penrod, Gail

    1988-01-01

    This paper describes an interface connecting InterSystems MUMPS (M/VX) to an external relational DBMS, the SYBASE Database Management System. The interface enables MUMPS to operate in a relational environment and gives the MUMPS language full access to a complete set of SQL commands. MUMPS generates SQL statements as ASCII text and sends them to the RDBMS. The RDBMS executes the statements and returns ASCII results to MUMPS. The interface suggests that the language features of MUMPS make it an attractive tool for use in the relational database environment. The approach described in this paper separates MUMPS from the relational database. Positioning the relational database outside of MUMPS promotes data sharing and permits a number of different options to be used for working with the data. Other languages like C, FORTRAN, and COBOL can access the RDBMS database. Advanced tools provided by the relational database vendor can also be used. SYBASE is an advanced high-performance transaction-oriented relational database management system for the VAX/VMS and UNIX operating systems. SYBASE is designed using a distributed open-systems architecture, and is relatively easy to interface with MUMPS.

  14. Network versus portfolio structure in financial systems

    Science.gov (United States)

    Kobayashi, Teruyoshi

    2013-10-01

    The question of how to stabilize financial systems has attracted considerable attention since the global financial crisis of 2007-2009. Recently, Beale et al. [Proc. Natl. Acad. Sci. USA 108, 12647 (2011)] demonstrated that higher portfolio diversity among banks would reduce systemic risk by decreasing the risk of simultaneous defaults at the expense of a higher likelihood of individual defaults. In practice, however, a bank default has an externality in that it undermines other banks’ balance sheets. This paper explores how each of these different sources of risk, simultaneity risk and externality, contributes to systemic risk. The results show that the allocation of external assets that minimizes systemic risk varies with the topology of the financial network as long as asset returns have negative correlations. In the model, a well-known centrality measure, PageRank, reflects an appropriately defined “infectiveness” of a bank. An important result is that the most infective bank needs not always to be the safest bank. Under certain circumstances, the most infective node should act as a firewall to prevent large-scale collective defaults. The introduction of a counteractive portfolio structure will significantly reduce systemic risk.

  15. Artificial Neural Network System for Thyroid Diagnosis

    Directory of Open Access Journals (Sweden)

    Mazin Abdulrasool Hameed

    2017-05-01

    Full Text Available Thyroid disease is one of major causes of severe medical problems for human beings. Therefore, proper diagnosis of thyroid disease is considered as an important issue to determine treatment for patients. This paper focuses on using Artificial Neural Network (ANN as a significant technique of artificial intelligence to diagnose thyroid diseases. The continuous values of three laboratory blood tests are used as input signals to the proposed system of ANN. All types of thyroid diseases that may occur in patients are taken into account in design of system, as well as the high accuracy of the detection and categorization of thyroid diseases are considered in the system. A multilayer feedforward architecture of ANN is adopted in the proposed design, and the back propagation is selected as learning algorithm to accomplish the training process. The result of this research shows that the proposed ANN system is able to precisely diagnose thyroid disease, and can be exploited in practical uses. The system is simulated via MATLAB software to evaluate its performance

  16. Research Update: Interfacing ultrasmall metal nanoclusters with biological systems

    Science.gov (United States)

    Shang, Li; Nienhaus, G. Ulrich

    2017-05-01

    Metal nanoclusters (NCs), a new type of nanomaterial with unique physicochemical properties, show great potential in many biomedical applications. Understanding their behavior in the complex biological environment is critical not only for designing highly efficient NC-based nanomedicines but also for elucidating the biological impact (e.g., toxicity) of these emerging nanomaterials. In this review, we give an overview of recent progress in exploring interactions of metal NCs with biological systems, including protein adsorption onto NCs, NC interactions with cells, and also the in vivo behavior of NCs. We also discuss the biological responses to the interactions, key parameters defining the interactions, and current challenges in the exploration of NCs in the complex biological environment.

  17. Miniaturized Blood Pressure Telemetry System with RFID Interface

    Directory of Open Access Journals (Sweden)

    Michele Caldara

    2016-08-01

    Full Text Available This work deals with the development and characterization of a potentially implantable blood pressure telemetry system, based on an active Radio-Frequency IDentification (RFID tag, International Organization for Standardization (ISO 15693 compliant. This approach aims to continuously measure the average, systolic and diastolic blood pressure of the small/medium animals. The measured pressure wave undergoes embedded processing and results are stored onboard in a non-volatile memory, providing the data under interrogation by an external RFID reader. In order to extend battery lifetime, RFID energy harvesting has been investigated. The paper presents the experimental characterization in a laboratory and preliminary in-vivo tests. The device is a prototype mainly intended, in a future engineered version, for monitoring freely moving test animals for pharmaceutical research and drug safety assessment purposes, but it could have multiple uses in environmental and industrial applications.

  18. Research on the Countermeasures against Electromagnetic Interface in Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Won Bin; Kang, Young Suk; Choi, Hyo Yul; Cha, Ok Hyun [Korea Electric Power Research Institute, Taejon (Korea, Republic of); Lee, Gi Chul; Le, Jae Bok; Ha, Tae Hyun; Kim, Suk Joo; Na, Dae Yul; Kim, Yong Ho; Jeong, Kyo Beom [Korea Electrotechnology Research Institute, Changwon (Korea, Republic of)

    1996-12-31

    As the results of widespread use of microelectronics in electric power system, electric environment of power operation facilities in substation has become more weak and severe for surge voltages. Electromagnetic coupled overvoltage caused by HV bus switching operating lead to the malfunction or destruction of low voltage control circuit which mostly used signal. To scope with this transients overvoltage, it is necessary to be investigated transient source and propagation path and analysed its effects to low voltage circuit such as relay. This study is to analysis source of conducted EMP(electromagnetic pulse) on the low voltage control circuit and to acquits transient voltage waveforms, and to provide countermeasures against transient voltage, and EMP filtering method according to each EMP each type. With this, gradual improvement of EMI countermeasure will be achieved. (author). 49 refs., figs.

  19. Mission Operations Center (MOC) - Precipitation Processing System (PPS) Interface Software System (MPISS)

    Science.gov (United States)

    Ferrara, Jeffrey; Calk, William; Atwell, William; Tsui, Tina

    2013-01-01

    MPISS is an automatic file transfer system that implements a combination of standard and mission-unique transfer protocols required by the Global Precipitation Measurement Mission (GPM) Precipitation Processing System (PPS) to control the flow of data between the MOC and the PPS. The primary features of MPISS are file transfers (both with and without PPS specific protocols), logging of file transfer and system events to local files and a standard messaging bus, short term storage of data files to facilitate retransmissions, and generation of file transfer accounting reports. The system includes a graphical user interface (GUI) to control the system, allow manual operations, and to display events in real time. The PPS specific protocols are an enhanced version of those that were developed for the Tropical Rainfall Measuring Mission (TRMM). All file transfers between the MOC and the PPS use the SSH File Transfer Protocol (SFTP). For reports and data files generated within the MOC, no additional protocols are used when transferring files to the PPS. For observatory data files, an additional handshaking protocol of data notices and data receipts is used. MPISS generates and sends to the PPS data notices containing data start and stop times along with a checksum for the file for each observatory data file transmitted. MPISS retrieves the PPS generated data receipts that indicate the success or failure of the PPS to ingest the data file and/or notice. MPISS retransmits the appropriate files as indicated in the receipt when required. MPISS also automatically retrieves files from the PPS. The unique feature of this software is the use of both standard and PPS specific protocols in parallel. The advantage of this capability is that it supports users that require the PPS protocol as well as those that do not require it. The system is highly configurable to accommodate the needs of future users.

  20. Mixed-level optical-system simulation incorporating component-level modeling of interface elements

    Science.gov (United States)

    Mena, Pablo V.; Stone, Bryan; Heller, Evan; Herrmann, Dan; Ghillino, Enrico; Scarmozzino, Rob

    2014-03-01

    While system-level simulation can allow designers to assess optical system performance via measures such as signal waveforms, spectra, eye diagrams, and BER calculations, component-level modeling can provide a more accurate description of coupling into and out of individual devices, as well as their detailed signal propagation characteristics. In particular, the system-level simulation of interface components used in optical systems, including splitters, combiners, grating couplers, waveguides, spot-size converters, and lens assemblies, can benefit from more detailed component-level modeling. Depending upon the nature of the device and the scale of the problem, simulation of optical transmission through these components can be carried out using either electromagnetic device-level simulation, such as the beampropagation method, or ray-based approaches. In either case, system-level simulation can interface to such componentlevel modeling via a suitable exchange of optical signal data. This paper presents the use of a mixed-level simulation flow in which both electromagnetic device-level and ray-based tools are integrated with a system-level simulation environment in order to model the use of various interface components in optical systems for a range of purposes, including, for example, coupling to and from optical transmission media such as single- and multimode optical fiber. This approach enables case studies on the impact of physical and geometric component variations on system performance, and the sensitivity of system behavior to misalignment between components.

  1. CD4-gp120 interaction interface - a gateway for HIV-1 infection in human: molecular network, modeling and docking studies.

    Science.gov (United States)

    Pandey, Deeksha; Podder, Avijit; Pandit, Mansi; Latha, Narayanan

    2017-09-01

    The major causative agent for Acquired Immune Deficiency Syndrome (AIDS) is Human Immunodeficiency Virus-1 (HIV-1). HIV-1 is a predominant subtype of HIV which counts on human cellular mechanism virtually in every aspect of its life cycle. Binding of viral envelope glycoprotein-gp120 with human cell surface CD4 receptor triggers the early infection stage of HIV-1. This study focuses on the interaction interface between these two proteins that play a crucial role for viral infectivity. The CD4-gp120 interaction interface has been studied through a comprehensive protein-protein interaction network (PPIN) analysis and highlighted as a useful step towards identifying potential therapeutic drug targets against HIV-1 infection. We prioritized gp41, Nef and Tat proteins of HIV-1 as valuable drug targets at early stage of viral infection. Lack of crystal structure has made it difficult to understand the biological implication of these proteins during disease progression. Here, computational protein modeling techniques and molecular dynamics simulations were performed to generate three-dimensional models of these targets. Besides, molecular docking was initiated to determine the desirability of these target proteins for already available HIV-1 specific drugs which indicates the usefulness of these protein structures to identify an effective drug combination therapy against AIDS.

  2. Multiphase flow in microfluidic systems - Control and applications of droplets and interfaces

    NARCIS (Netherlands)

    Shui, Lingling; Eijkel, Jan C.T.; van den Berg, Albert

    2007-01-01

    Micro- and nanotechnology can provide us with many tools for the production, study and detection of colloidal and interfacial systems. In multiphase flow in micro- and nanochannels several immiscible fluids will be separated from each other by flexible fluidic interfaces. The multiphase coexistence

  3. A Tabletop Board Game Interface for Multi-User Interaction with a Storytelling System

    NARCIS (Netherlands)

    Alofs, T.; Theune, Mariet; Swartjes, I.M.T.; Camurri, A.; Costa, C.

    2011-01-01

    The Interactive Storyteller is an interactive storytelling system with a multi-user tabletop interface. Our goal was to design a generic framework combining emergent narrative, where stories emerge from the actions of autonomous intelligent agents, with the social aspects of traditional board games.

  4. Canonical systems of differential equations with self-adjoint interface conditions on graphs

    NARCIS (Netherlands)

    de Snoo, H; Winkler, Henrik

    2005-01-01

    For n canonical systems of differential equations, the corresponding n copies of their domain [0,∞) are thought of as a graph with vertex 0. An interface condition at 0 is given by a so-called Nevanlinna pair. Explicit formulae are deduced for the spectral representation of the corresponding

  5. Single crystal growth and anisotropic crystal-fluid interface tension in soft colloidal systems

    NARCIS (Netherlands)

    Nguyen, V.D.; Hu, Z.; Schall, P.

    2011-01-01

    We measure the anisotropy of the crystal-fluid interfacial free energy in soft colloidal systems. A temperature gradient is used to direct crystal nucleation and control the growth of large single crystals in order to achieve well-equilibrated crystal-fluid interfaces. Confocal microscopy is used to

  6. Research and Development for an Operational Information Ecology: The User-System Interface Agent Project

    Science.gov (United States)

    Srivastava, Sadanand; deLamadrid, James

    1998-01-01

    The User System Interface Agent (USIA) is a special type of software agent which acts as the "middle man" between a human user and an information processing environment. USIA consists of a group of cooperating agents which are responsible for assisting users in obtaining information processing services intuitively and efficiently. Some of the main features of USIA include: (1) multiple interaction modes and (2) user-specific and stereotype modeling and adaptation. This prototype system provides us with a development platform towards the realization of an operational information ecology. In the first phase of this project we focus on the design and implementation of prototype system of the User-System Interface Agent (USIA). The second face of USIA allows user interaction via a restricted query language as well as through a taxonomy of windows. In third phase the USIA system architecture was revised.

  7. Knowledge Analysis of Tasks as a Basis for Interface Design of Complex Developmental Systems

    Directory of Open Access Journals (Sweden)

    Alan Colman

    1995-05-01

    Full Text Available Complex development systems are interactive software systems used for the manipulation, design or development in complex problem domains. This paper highlights some of the limitations of Johnson's Knowledge Analysis of Tasks (KAT (Johnson, 1989, 1992 and proposes a modified version of KAT where task knowledge can be analysed and grouped in a way that will make it useful in the derivation of interfaces in complex developmental systems. This modified form has been applied to the domain of intelligent distributed control systems in an attempt to develop interface concepts for the development, installation and documentation of such systems. The paper further shows how this extended version of KAT may prove a useful input to object oriented analysis.

  8. Integration of an intelligent systems behavior simulator and a scalable soldier-machine interface

    Science.gov (United States)

    Johnson, Tony; Manteuffel, Chris; Brewster, Benjamin; Tierney, Terry

    2007-04-01

    As the Army's Future Combat Systems (FCS) introduce emerging technologies and new force structures to the battlefield, soldiers will increasingly face new challenges in workload management. The next generation warfighter will be responsible for effectively managing robotic assets in addition to performing other missions. Studies of future battlefield operational scenarios involving the use of automation, including the specification of existing and proposed technologies, will provide significant insight into potential problem areas regarding soldier workload. The US Army Tank Automotive Research, Development, and Engineering Center (TARDEC) is currently executing an Army technology objective program to analyze and evaluate the effect of automated technologies and their associated control devices with respect to soldier workload. The Human-Robotic Interface (HRI) Intelligent Systems Behavior Simulator (ISBS) is a human performance measurement simulation system that allows modelers to develop constructive simulations of military scenarios with various deployments of interface technologies in order to evaluate operator effectiveness. One such interface is TARDEC's Scalable Soldier-Machine Interface (SMI). The scalable SMI provides a configurable machine interface application that is capable of adapting to several hardware platforms by recognizing the physical space limitations of the display device. This paper describes the integration of the ISBS and Scalable SMI applications, which will ultimately benefit both systems. The ISBS will be able to use the Scalable SMI to visualize the behaviors of virtual soldiers performing HRI tasks, such as route planning, and the scalable SMI will benefit from stimuli provided by the ISBS simulation environment. The paper describes the background of each system and details of the system integration approach.

  9. Delft FEWS: an open interface that connects models and data streams for operational forecasting systems

    Science.gov (United States)

    de Rooij, Erik; Werner, Micha

    2010-05-01

    Many of the operational forecasting systems that are in use today are centred around a single modelling suite. Over the years these systems and the required data streams have been tailored to provide a closed-knit interaction with their underlying modelling components. However, as time progresses it becomes a challenge to integrate new technologies into these model centric operational systems. Often the software used to develop these systems is out of date, or the original designers of these systems are no longer available. Additionally, the changing of the underlying models may requiring the complete system to be changed. This then becomes an extensive effort, not only from a software engineering point of view, but also from a training point of view. Due to significant time and resources being committed to re-training the forecasting teams that interact with the system on a daily basis. One approach to reducing the effort required in integrating new models and data is through an open interface architecture, and through the use of defined interfaces and standards in data exchange. This approach is taken by the Delft-FEWS operational forecasting shell, which has now been applied in some 40 operational forecasting centres across the world. The Delft-FEWS framework provides several interfaces that allow models and data in differing formats to be flexibly integrated with the system. The most common approach to the integration of modes is through the Delft-FEWS Published Interface. This is an XML based data exchange format that supports the exchange of time series data, as well as vector and gridded data formats. The Published Interface supports standardised data formats such as GRIB and the NetCDF-CF standard. A wide range of models has been integrated with the system through this approach, and these are used operationally across the forecasting centres using Delft FEWS. Models can communicate directly with the interface of Delft-FEWS, or through a SOAP service. This

  10. An open network type DCME system

    Science.gov (United States)

    Kato, T.; Suga, K.; Hagi, K.; Ohtsuki, H.; Shinta, M.; Kinoshita, T.; Murata, K.

    1992-03-01

    The first open network-type digital circuit multiplication equipment (DCME) system, which complies with Intelsat IESS-501 (Rev.2), Eutelsat BS14-49E, CCITT Rec. G.723, G.721, and Rec. Q.50 specifications, has been developed. It provides an economical way to multiply circuit capacity by using DSI and variable bit rate adaptive differential pulse code modulation techniques. It is flexible enough to support a variety of operation modes such as Multidestination for up to four destinations, Multiclique for up to two destinations, Single destination, and Mixed Single-destination and Multidestination operations. In addition, it offers a wide range of possibilities in satellite, submarine, and terrestrial applications. The newly-developed DCME system utilizes a modified adaptive threshold activity detector and an accurate, robust data/speech discriminator in order to prevent false detection and false decisions in high background noise environment. In the DCME system, the Operation and Maintenance Center is used to monitor the operating conditions and to control the system functions.

  11. Knowledge acquisition and interface design for learning on demand systems

    Science.gov (United States)

    Nelson, Wayne A.

    1993-01-01

    The rapid changes in our world precipitated by technology have created new problems and new challenges for education and training. A knowledge 'explosion' is occurring as our society moves toward a service oriented economy that relies on information as the major resource. Complex computer systems are beginning to dominate the workplace, causing alarming growth and change in many fields. The rapidly changing nature of the workplace, especially in fields related to information technology, requires that our knowledge be updated constantly. This characteristic of modern society poses seemingly unsolvable instructional problems involving coverage and obsolescence. The sheer amount of information to be learned is rapidly increasing, while at the same time some information becomes obsolete in light of new information. Education, therefore, must become a lifelong process that features learning of new material and skills as needed in relation to the job to be done. Because of the problems cited above, the current model of learning in advance may no longer be feasible in our high-technology world. In many cases, learning in advance is impossible because there are simply too many things to learn. In addition, learning in advance can be time consuming, and often results in decontextualized knowledge that does not readily transfer to the work environment. The large and growing discrepancy between the amount of potentially relevant knowledge available and the amount a person can know and remember makes learning on demand an important alternative to current instructional practices. Learning on demand takes place whenever an individual must learn something new in order to perform a task or make a decision. Learning on demand is a promising approach for addressing the problems of coverage and obsolescence because learning is contextualized and integrated into the task environment rather than being relegated to a separate phase that precedes work. Learning on demand allows learners

  12. Visualization and interactive interface to network of music authors on the iPhone

    OpenAIRE

    Matijević, Aleš

    2010-01-01

    Mobile devices have become a part of our lives. With the possibility of instal- ling additional software, mobile devices cover almost all aspects of our daily activities. For applications not yet covered by manufacturers of these devices, their vendors offer software development kits for development of new appli- cations. On the other side, concepts of graph and network theory are now used in all fields of scientific research from computer science, engineering and medicine to sociology and ps...

  13. Windows 2012 Server network security securing your Windows network systems and infrastructure

    CERN Document Server

    Rountree, Derrick

    2013-01-01

    Windows 2012 Server Network Security provides the most in-depth guide to deploying and maintaining a secure Windows network. The book drills down into all the new features of Windows 2012 and provides practical, hands-on methods for securing your Windows systems networks, including: Secure remote access Network vulnerabilities and mitigations DHCP installations configuration MAC filtering DNS server security WINS installation configuration Securing wired and wireless connections Windows personal firewall

  14. Synthesis of vertically aligned carbon nanofibres for interfacing with live systems

    Energy Technology Data Exchange (ETDEWEB)

    Melechko, Anatoli V; Desikan, Ramya [Materials Science and Engineering Department, North Carolina State University, Raleigh, NC 27695 (United States); McKnight, Timothy E; Klein, Kate L; Rack, Philip D [Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States)

    2009-10-07

    The ability to synthesize carbon nanofibres (CNFs) with a high degree of control over their geometry, location and structure via catalytic plasma-enhanced chemical vapour deposition has expanded the possibility of new applications. The nanoscale dimensions and high aspect ratio of vertically aligned carbon nanofibres (VACNFs), along with favourable physical and chemical characteristics, has provided a nanostructured material with properties that are well-suited for interfacing with live cells and tissues. This review surveys the aspects of synthesis, integration and functionalization of VACNFs, followed by examples of how VACNFs have been used to interface with live systems for a variety of advanced nanoscale biological applications. (topical review)

  15. Synthesis of vertically aligned carbon nanofibers for interfacing with live systems

    Energy Technology Data Exchange (ETDEWEB)

    Melechko, Anatoli Vasilievich [ORNL; Desikan, Ramya [ORNL; McKnight, Timothy E [ORNL; Klein, Kate L [ORNL; Rack, P. D. [University of Tennessee, Knoxville (UTK)

    2009-01-01

    The ability to synthesize carbon nanofibers with a high degree of control over their geometry, location, and structure via catalytic plasma-enhanced chemical vapor deposition has expanded the possibility of new applications. The nanoscale dimensions and high aspect ratio of vertically aligned carbon nanofibers (VACNFs), along with favorable physical and chemical characteristics, has provided a nanostructured material with properties that are well-suited for interfacing with live cells and tissues. This review surveys the aspects of synthesis, integration, and functionalization of VACNFs, followed by examples of how VACNFs have been used to interface with live systems for a variety of advanced nanoscale biological applications.

  16. Arduino-Based embedded systems interfacing, simulation, and LabVIEW GUI

    CERN Document Server

    Singh, Rajesh; Singh, Bhupendra; Choudhury, Sushabhan

    2018-01-01

    Arduino is an open-source electronics platform based on easy-to-use hardware and software while LabVIEW is a graphical programming telling how to connect functions and work with a variety of datatypes when constructing applications.This book will help beginners to get started with Arduino-based embedded systems including essential know-how of the programming and interfacing of the devices. Book includes programming and simulation of Arduino-based projects and interfacing with LabVIEW, based on practical case studies. The book comprises of total twenty five chapters with description, working model of LabVIEW and programming with Arduino IDE.

  17. Advanced interfacing techniques for sensors measurement circuits and systems for intelligent sensors

    CERN Document Server

    Roy, Joyanta; Kumar, V; Mukhopadhyay, Subhas

    2017-01-01

    This book presents ways of interfacing sensors to the digital world, and discusses the marriage between sensor systems and the IoT: the opportunities and challenges. As sensor output is often affected by noise and interference, the book presents effective schemes for recovering the data from a signal that is buried in noise. It also explores interesting applications in the area of health care, un-obstructive monitoring and the electronic nose and tongue. It is a valuable resource for engineers and scientists in the area of sensors and interfacing wanting to update their knowledge of the latest developments in the field and learn more about sensing applications and challenges.

  18. Fault Detection for Quantized Networked Control Systems

    Directory of Open Access Journals (Sweden)

    Wei-Wei Che

    2013-01-01

    Full Text Available The fault detection problem in the finite frequency domain for networked control systems with signal quantization is considered. With the logarithmic quantizer consideration, a quantized fault detection observer is designed by employing a performance index which is used to increase the fault sensitivity in finite frequency domain. The quantized measurement signals are dealt with by utilizing the sector bound method, in which the quantization error is treated as sector-bounded uncertainty. By using the Kalman-Yakubovich-Popov (GKYP Lemma, an iterative LMI-based optimization algorithm is developed for designing the quantized fault detection observer. And a numerical example is given to illustrate the effectiveness of the proposed method.

  19. Network quotients: structural skeletons of complex systems.

    Science.gov (United States)

    Xiao, Yanghua; MacArthur, Ben D; Wang, Hui; Xiong, Momiao; Wang, Wei

    2008-10-01

    A defining feature of many large empirical networks is their intrinsic complexity. However, many networks also contain a large degree of structural repetition. An immediate question then arises: can we characterize essential network complexity while excluding structural redundancy? In this article we utilize inherent network symmetry to collapse all redundant information from a network, resulting in a coarse graining which we show to carry the essential structural information of the "parent" network. In the context of algebraic combinatorics, this coarse-graining is known as the "quotient." We systematically explore the theoretical properties of network quotients and summarize key statistics of a variety of "real-world" quotients with respect to those of their parent networks. In particular, we find that quotients can be substantially smaller than their parent networks yet typically preserve various key functional properties such as complexity (heterogeneity and hub vertices) and communication (diameter and mean geodesic distance), suggesting that quotients constitute the essential structural skeletons of their parent networks. We summarize with a discussion of potential uses of quotients in analysis of biological regulatory networks and ways in which using quotients can reduce the computational complexity of network algorithms.

  20. Coping with human errors through system design: Implications for ecological interface design

    DEFF Research Database (Denmark)

    Rasmussen, Jens; Vicente, Kim J.

    1989-01-01

    Research during recent years has revealed that human errors are not stochastic events which can be removed through improved training programs or optimal interface design. Rather, errors tend to reflect either systematic interference between various models, rules, and schemata, or the effects of t...... on both the interferences causing error and on the opportunity for error recovery left to the operator.......Research during recent years has revealed that human errors are not stochastic events which can be removed through improved training programs or optimal interface design. Rather, errors tend to reflect either systematic interference between various models, rules, and schemata, or the effects...... of the adaptive mechanisms involved in learning. In terms of design implications, these findings suggest that reliable human-system interaction will be achieved by designing interfaces which tend to minimize the potential for control interference and support recovery from errors. In other words, the focus should...

  1. A bidirectional brain-machine interface connecting alert rodents to a dynamical system.

    Science.gov (United States)

    Boi, Fabio; Semprini, Marianna; Mussa Ivaldi, Ferdinando A; Panzeri, Stefano; Vato, Alessandro

    2015-01-01

    We present a novel experimental framework that implements a bidirectional brain-machine interface inspired by the operation of the spinal cord in vertebrates that generates a control policy in the form of a force field. The proposed experimental set-up allows connecting the brain of freely moving rats to an external device. We tested this apparatus in a preliminary experiment with an alert rat that used the interface for acquiring a food reward. The goal of this approach to bidirectional interfaces is to explore the role of voluntary neural commands in controlling a dynamical system represented by a small cart moving on vertical plane and connected to a water/pellet dispenser.

  2. A hybrid grid method in an auxiliary coordinate system for irregular fluid-solid interface modelling

    Science.gov (United States)

    Qu, Yingming; Huang, Jianping; Li, Zhenchun; Li, Jinli

    2017-03-01

    Seismic wave propagation in a fluid-solid environment cannot be simulated with a single wave equation, but can be described by use of the acoustic and viscoelastic wave equations for their respective fluid and solid parts. Proper boundary conditions at the fluid-solid interface based on the relationship between pressure and stress are crucial when combining the two different wave equations. Traditional finite difference methods have had difficulties in dealing with the irregular fluid-solid interface topography. The Cartesian grids discretization leads to artificial reflections and diffractions during the conversion between acoustic wave and elastic waves. We propose a variable coordinate transformation methodology to simulate seismic waves in a fluid-solid environment. An irregular fluid-solid interface can be transformed into a horizontal interface, so that pressure and stress can be well converted. We also introduce a multiblock coordinate transformation (MCT) method which meshes each layer with curvilinear grids to transform the interface topography into a horizontal one, thereby allocating vertical sampling points adaptively. The grid size is determined adaptively based on the shape and the parameters of the target area, which reduces in size in when the layers are thin or exhibit low velocities. A Lebedev-standard staggered grid scheme is applied to the MCT method to reduce both the computational cost associated with the Lebedev grid scheme and the instability in the auxiliary coordinate system when using a standard staggered grid scheme.

  3. System Leadership, Networks and the Question of Power

    Science.gov (United States)

    Hatcher, Richard

    2008-01-01

    The author's argument revolves around the relationships between government agendas and the agency of teachers, and between them the intermediary role of management as "system leaders" of network forms. Network is a pluralistic concept: networks can serve very different educational-political interests. They offer the potential of new…

  4. On Emulation-Based Network Intrusion Detection Systems

    NARCIS (Netherlands)

    Abbasi, Ali; Wetzel, Jos; Bokslag, Wouter; Zambon, Emmanuele; Etalle, Sandro

    2014-01-01

    Emulation-based network intrusion detection systems have been devised to detect the presence of shellcode in network traffic by trying to execute (portions of) the network packet payloads in an in- strumented environment and checking the execution traces for signs of shellcode activity.

  5. The Artifical Neural Network as means for modeling Nonlinear Systems

    OpenAIRE

    Drábek Oldøich; Taufer Ivan

    1998-01-01

    The paper deals with nonlinear system identification based on neural network. The topic of this publication is simulation of training and testing a neural network. A contribution is assigned to technologists which are good at the clasical identification problems but their knowledges about identification based on neural network are only on the stage of theoretical bases.

  6. The Artifical Neural Network as means for modeling Nonlinear Systems

    Directory of Open Access Journals (Sweden)

    Drábek Oldøich

    1998-12-01

    Full Text Available The paper deals with nonlinear system identification based on neural network. The topic of this publication is simulation of training and testing a neural network. A contribution is assigned to technologists which are good at the clasical identification problems but their knowledges about identification based on neural network are only on the stage of theoretical bases.

  7. Sensitivity and network topology in chemical reaction systems

    Science.gov (United States)

    Okada, Takashi; Mochizuki, Atsushi

    2017-08-01

    In living cells, biochemical reactions are catalyzed by specific enzymes and connect to one another by sharing substrates and products, forming complex networks. In our previous studies, we established a framework determining the responses to enzyme perturbations only from network topology, and then proved a theorem, called the law of localization, explaining response patterns in terms of network topology. In this paper, we generalize these results to reaction networks with conserved concentrations, which allows us to study any reaction system. We also propose network characteristics quantifying robustness. We compare E. coli metabolic network with randomly rewired networks, and find that the robustness of the E. coli network is significantly higher than that of the random networks.

  8. System and method for generating a relationship network

    Science.gov (United States)

    Franks, Kasian [Kensington, CA; Myers, Cornelia A [St. Louis, MO; Podowski, Raf M [Pleasant Hill, CA

    2011-07-26

    A computer-implemented system and process for generating a relationship network is disclosed. The system provides a set of data items to be related and generates variable length data vectors to represent the relationships between the terms within each data item. The system can be used to generate a relationship network for documents, images, or any other type of file. This relationship network can then be queried to discover the relationships between terms within the set of data items.

  9. The Design of Data Transmission Terminal in Remote Warning Control System Based on CDMA 1X Network

    Directory of Open Access Journals (Sweden)

    Dan CHEN

    2014-03-01

    Full Text Available This study proposes a framework of data transmission terminal in remote warning control system based on CDMA 1X network. According to the functional requirements of wireless broadband communication system, the hardware interfaces and software of the CDMA 1X data transmission terminal are designed detailedly and the system is implemented using wireless access and embedded development technologies. It has good applicability and portability so that various wireless data transmissions can be achieved by replacing the data source module.

  10. Experimental study of hybrid interface cooling system using air ventilation and nanofluid

    Science.gov (United States)

    Rani, M. F. H.; Razlan, Z. M.; Bakar, S. A.; Desa, H.; Wan, W. K.; Ibrahim, I.; Kamarrudin, N. S.; Bin-Abdun, Nazih A.

    2017-09-01

    The hybrid interface cooling system needs to be established to chill the battery compartment of electric car and maintained its ambient temperature inside the compartment between 25°C to 35°C. The air cooling experiment has been conducted to verify the cooling capacity, compressor displacement volume, dehumidifying value and mass flow rate of refrigerant (R-410A). At the same time, liquid cooling system is analysed theoretically by comparing the performance of two types of nanofluid, i.e., CuO + Water and Al2O3 + Water, based on the heat load generated inside the compartment. In order for the result obtained to be valid and reliable, several assumptions are considered during the experimental and theoretical analysis. Results show that the efficiency of the hybrid interface cooling system is improved as compared to the individual cooling system.

  11. Graphical user interface for input output characterization of single variable and multivariable highly nonlinear systems

    Directory of Open Access Journals (Sweden)

    Shahrukh Adnan Khan M. D.

    2017-01-01

    Full Text Available This paper presents a Graphical User Interface (GUI software utility for the input/output characterization of single variable and multivariable nonlinear systems by obtaining the sinusoidal input describing function (SIDF of the plant. The software utility is developed on MATLAB R2011a environment. The developed GUI holds no restriction on the nonlinearity type, arrangement and system order; provided that output(s of the system is obtainable either though simulation or experiments. An insight to the GUI and its features are presented in this paper and example problems from both single variable and multivariable cases are demonstrated. The formulation of input/output behavior of the system is discussed and the nucleus of the MATLAB command underlying the user interface has been outlined. Some of the industries that would benefit from this software utility includes but not limited to aerospace, defense technology, robotics and automotive.

  12. Autoblocker: a system for detecting and blocking of network scanning based on analysis of netflow data

    Energy Technology Data Exchange (ETDEWEB)

    Bobyshev, A.; Lamore, D.; Demar, P.; /Fermilab

    2004-12-01

    In a large campus network, such at Fermilab, with tens of thousands of nodes, scanning initiated from either outside of or within the campus network raises security concerns. This scanning may have very serious impact on network performance, and even disrupt normal operation of many services. In this paper we introduce a system for detecting and automatic blocking excessive traffic of different kinds of scanning, DoS attacks, virus infected computers. The system, called AutoBlocker, is a distributed computing system based on quasi-real time analysis of network flow data collected from the border router and core switches. AutoBlocker also has an interface to accept alerts from IDS systems (e.g. BRO, SNORT) that are based on other technologies. The system has multiple configurable alert levels for the detection of anomalous behavior and configurable trigger criteria for automated blocking of scans at the core or border routers. It has been in use at Fermilab for about 2 years, and has become a very valuable tool to curtail scan activity within the Fermilab campus network.

  13. PC-based Human Machine Interface Control for Packaging System in Pharmaceutical Factory

    OpenAIRE

    Zin Mar Tun; Theingi; Kyaw Thiha

    2014-01-01

    Moving from trend to tradition, more and more manufacturers are adding human machine interface (HMI) to their manufacturing process. A good HMI will increase the productivity of the operator and machine, increase uptime and assist in providing consistent product quality. In this system, HMI is developed to monitor the whole process and control the functions of process. The system is designed and constructed to control and monitor drug bottle packaging operation in the pharmaceutical factory. ...

  14. A review of electron bombardment thruster systems/spacecraft field and particle interfaces

    Science.gov (United States)

    Byers, D. C.

    1978-01-01

    This paper collates and summarizes information on the field and particle interfaces of electron bombardment ion thruster systems. Major areas discussed are the nonpropellant particles, neutral propellant, ion beam, low energy plasma, and fields. Spacecraft functions and subsystems reviewed are solar arrays, thermal control systems, optical sensors, communications, science, structures and materials, and potential control. An appendix is included to facilitate identification of specific interaction areas.

  15. Neural Network Based Intelligent Sootblowing System

    Energy Technology Data Exchange (ETDEWEB)

    Mark Rhode

    2005-04-01

    . Due to the composition of coal, particulate matter is also a by-product of coal combustion. Modern day utility boilers are usually fitted with electrostatic precipitators to aid in the collection of particulate matter. Although extremely efficient, these devices are sensitive to rapid changes in inlet mass concentration as well as total mass loading. Traditionally, utility boilers are equipped with devices known as sootblowers, which use, steam, water or air to dislodge and clean the surfaces within the boiler and are operated based upon established rule or operator's judgment. Poor sootblowing regimes can influence particulate mass loading to the electrostatic precipitators. The project applied a neural network intelligent sootblowing system in conjunction with state-of-the-art controls and instruments to optimize the operation of a utility boiler and systematically control boiler slagging/fouling. This optimization process targeted reduction of NOx of 30%, improved efficiency of 2% and a reduction in opacity of 5%. The neural network system proved to be a non-invasive system which can readily be adapted to virtually any utility boiler. Specific conclusions from this neural network application are listed below. These conclusions should be used in conjunction with the specific details provided in the technical discussions of this report to develop a thorough understanding of the process.

  16. Interface models

    DEFF Research Database (Denmark)

    Ravn, Anders P.; Staunstrup, Jørgen

    1994-01-01

    This paper proposes a model for specifying interfaces between concurrently executing modules of a computing system. The model does not prescribe a particular type of communication protocol and is aimed at describing interfaces between both software and hardware modules or a combination of the two...

  17. A Comparison of Geographic Information Systems, Complex Networks, and Other Models for Analyzing Transportation Network Topologies

    Science.gov (United States)

    Alexandrov, Natalia (Technical Monitor); Kuby, Michael; Tierney, Sean; Roberts, Tyler; Upchurch, Christopher

    2005-01-01

    This report reviews six classes of models that are used for studying transportation network topologies. The report is motivated by two main questions. First, what can the "new science" of complex networks (scale-free, small-world networks) contribute to our understanding of transport network structure, compared to more traditional methods? Second, how can geographic information systems (GIS) contribute to studying transport networks? The report defines terms that can be used to classify different kinds of models by their function, composition, mechanism, spatial and temporal dimensions, certainty, linearity, and resolution. Six broad classes of models for analyzing transport network topologies are then explored: GIS; static graph theory; complex networks; mathematical programming; simulation; and agent-based modeling. Each class of models is defined and classified according to the attributes introduced earlier. The paper identifies some typical types of research questions about network structure that have been addressed by each class of model in the literature.

  18. Fitness networks for real world systems via modified preferential attachment

    Science.gov (United States)

    Shang, Ke-ke; Small, Michael; Yan, Wei-sheng

    2017-05-01

    Complex networks are virtually ubiquitous, and the Barabási and Albert model (BA model) has became an acknowledged standard for the modelling of these systems. The so-called BA model is a kind of preferential attachment growth model based on the intuitive premise that popularity is attractive. However, preferential attachment alone is insufficient to describe the diversity of complex networks observed in the real world. In this paper we first use the accuracy of a link prediction method, as a metric for network fitness. The link prediction method predicts the occurrence of links consistent with preferential attachment, the performance of this link prediction scheme is then a natural measure of the ;preferential-attachment-likeness; of a given network. We then propose several modification methods and modified BA models to construct networks which more accurately describe the fitness properties of real networks. We find that all features assortativity, degree distribution and rich-club formation can play significant roles for the network construction and eventual structure. Moreover, link sparsity and the size of a network are key factors for network reconstruction. In addition, we find that the structure of the network which is limited by geographic location (nodes are embedded in a Euclidean space and connectivity is correlated with distances) differs from other typical networks. In social networks, we observe that the high school contact network has similar structure as the friends network and so we speculate that the contact behaviours can reflect real friendships.

  19. Design of external sensors board based on Bluetooth interface of smart phones for structural health monitoring system

    Science.gov (United States)

    Yu, Yan; Zhou, Yaping; Zhao, Xuefeng; Li, Dongsheng; Ou, Jinping

    2016-04-01

    As an important part of new information technology, the Internet of Things(IoT) is based on intelligent perception, recognition technology, ubiquitous computing, ubiquitous network integration, and it is known as the third wave of the development of information industry in the world after the computer and the Internet. And Smart Phones are the general term for a class of mobile phones with a separate operating system and operational memory, in which the third-party service programs including software, games, navigation, et.al, can be installed. Smart Phones, with not only sensors but also actuators, are widely used in the IoT world. As the current hot issues in the engineering area, Structural health monitoring (SHM) is also facing new problems about design ideas in the IoT environment. The development of IoT, wireless sensor network and mobile communication technology, provides a good technical platform for SHM. Based on these facts, this paper introduces a kind of new idea for Structural Health Monitoring using Smart Phones Technique. The system is described in detail, and the external sensor board based on Bluetooth interface is designed, the test based on Smart Phones is finished to validate the implementation and feasibility. The research is preliminary and more tests need to be carried out before it can be of practical use.

  20. The Network Information Management System (NIMS) in the Deep Space Network

    Science.gov (United States)

    Wales, K. J.

    1983-01-01

    In an effort to better manage enormous amounts of administrative, engineering, and management data that is distributed worldwide, a study was conducted which identified the need for a network support system. The Network Information Management System (NIMS) will provide the Deep Space Network with the tools to provide an easily accessible source of valid information to support management activities and provide a more cost-effective method of acquiring, maintaining, and retrieval data.