WorldWideScience

Sample records for network interface cards

  1. CERNET Interface Card

    CERN Multimedia

    1978-01-01

    Homegrown networking technology pre-dating the internet. This is a CERNnet card developed and built at CERN. There was a lot of space on the card between the components, so the engineers decided to put their portraits on it.

  2. Event building in an intelligent network interface card for the LHCb readout network

    CERN Document Server

    Dufey, J P; Neufeld, N; Zuin, M

    2001-01-01

    LHCb is an experiment being constructed at CERN's LHC accelerator for the purpose of studying precisely the CP violation parameters in the B-B system. Triggering poses special problems since the interesting events containing B-mesons are immersed in a large background of inelastic p-p reactions. Therefore, a 4 Level Triggering scheme (Level 0 to Level 3) has been implemented. Powerful embedded processors, used in modern intelligent Network Interface Cards (smart NICs), make it attractive to use them to handle the event building protocol in the high-speed data acquisition system of the LHCb experiment. The implementation of an event building algorithm developed for a specific Gigabit Ethernet NIC is presented and performance data are discussed. 5 Refs.

  3. Development of Network Interface Cards for TRIDAQ systems with the NaNet framework

    International Nuclear Information System (INIS)

    Ammendola, R.; Biagioni, A.; Cretaro, P.; Frezza, O.; Cicero, F. Lo; Lonardo, A.; Martinelli, M.; Paolucci, P.S.; Pastorelli, E.; Simula, F.; Valente, P.; Vicini, P.; Lorenzo, S. Di; Piandani, R.; Pontisso, L.; Sozzi, M.; Fiorini, M.; Neri, I.; Lamanna, G.; Rossetti, D.

    2017-01-01

    NaNet is a framework for the development of FPGA-based PCI Express (PCIe) Network Interface Cards (NICs) with real-time data transport architecture that can be effectively employed in TRIDAQ systems. Key features of the architecture are the flexibility in the configuration of the number and kind of the I/O channels, the hardware offloading of the network protocol stack, the stream processing capability, and the zero-copy CPU and GPU Remote Direct Memory Access (RDMA). Three NIC designs have been developed with the NaNet framework: NaNet-1 and NaNet-10 for the CERN NA62 low level trigger and NaNet 3 for the KM3NeT-IT underwater neutrino telescope DAQ system. We will focus our description on the NaNet-10 design, as it is the most complete of the three in terms of capabilities and integrated IPs of the framework.

  4. A FPGA-based Network Interface Card with GPUDirect enabling realtime GPU computing in HEP experiments

    CERN Document Server

    Lonardo, Alessandro; Ammendola, Roberto; Biagioni, Andrea; Cotta Ramusino, Angelo; Fiorini, Massimiliano; Frezza, Ottorino; Lamanna, Gianluca; Lo Cicero, Francesca; Martinelli, Michele; Neri, Ilaria; Paolucci, Pier Stanislao; Pastorelli, Elena; Pontisso, Luca; Rossetti, Davide; Simeone, Francesco; Simula, Francesco; Sozzi, Marco; Tosoratto, Laura; Vicini, Piero

    2015-01-01

    The capability of processing high bandwidth data streams in real-time is a computational requirement common to many High Energy Physics experiments. Keeping the latency of the data transport tasks under control is essential in order to meet this requirement. We present NaNet, a FPGA-based PCIe Network Interface Card design featuring Remote Direct Memory Access towards CPU and GPU memories plus a transport protocol offload module characterized by cycle-accurate upper-bound handling. The combination of these two features allows to relieve almost entirely the OS and the application from data tranfer management, minimizing the unavoidable jitter effects associated to OS process scheduling. The design currently supports one GbE (1000Base-T) and three custom 34 Gbps APElink I/O channels, but four-channels 10GbE (10Base-R) and 2.5 Gbps deterministic latency KM3link versions are being implemented. Two use cases of NaNet will be discussed: the GPU-based low level trigger for the RICH detector in the NA62 experiment an...

  5. NaNet-10: a 10GbE network interface card for the GPU-based low-level trigger of the NA62 RICH detector

    International Nuclear Information System (INIS)

    Ammendola, R.; Biagioni, A.; Frezza, O.; Lonardo, A.; Cicero, F. Lo; Martinelli, M.; Paolucci, P.S.; Pastorelli, E.; Simula, F.; Tosoratto, L.; Vicini, P.; Fiorini, M.; Neri, I.; Lamanna, G.; Piandani, R.; Pontisso, L.; Sozzi, M.; Rossetti, D.

    2016-01-01

    A GPU-based low level (L0) trigger is currently integrated in the experimental setup of the RICH detector of the NA62 experiment to assess the feasibility of building more refined physics-related trigger primitives and thus improve the trigger discriminating power. To ensure the real-time operation of the system, a dedicated data transport mechanism has been implemented: an FPGA-based Network Interface Card (NaNet-10) receives data from detectors and forwards them with low, predictable latency to the memory of the GPU performing the trigger algorithms. Results of the ring-shaped hit patterns reconstruction will be reported and discussed

  6. RANCANG BANGUN APLIKASI SMART CARD INTERFACE

    OpenAIRE

    I Putu Agus Swastika; Siti Saibah Pua Luka; Yanno Dwi Ananda

    2012-01-01

    Opportunity to development smart card -based application is quite large as the need for smart card technology in various fields of both business and government agencies and BUMN. One brand that is widely used smart card is a smart card type from a vendor production NFC ACR122U ACS (Advanced Card System Limited) because prices are relatively affordable, but fairly tough. At the Thesis is done, the ACS (Advanced Card System Limited) as a manufacturer of smart card vendor type ...

  7. Governance, Issuance Restrictions, And Competition In Payment Card Networks

    OpenAIRE

    Robert S. Pindyck

    2007-01-01

    I discuss the antitrust suit brought by the U.S. Department of Justice against Visa and MasterCard in 1998. Banks that issue Visa cards are free to also issue MasterCard cards, and vice versa, and many banks issue the cards of both networks. However, both Visa and MasterCard had rules prohibiting member banks from also issuing the cards of other networks, in particular American Express and Discover. In addition, most banks are members of both the Visa and MasterCard networks, so governance is...

  8. 75 FR 55392 - Employment Network Report Card

    Science.gov (United States)

    2010-09-10

    ... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2010-0046] Employment Network Report Card AGENCY: Social Security Administration (SSA). ACTION: Notice of Webinar and National Teleconference Call listening sessions--announcing two opportunities for SSA to hear public comments on Employment Network...

  9. INTERFACE ELECTRONIC MEDICAL CARD ON MOBILE DEVICE

    Directory of Open Access Journals (Sweden)

    Y. L. Nechyporenko

    2013-05-01

    Full Text Available The concept designed by electronic medical card for heterogeneous environment of medical information systems at various levels. Appropriate model and technical solution. Done evaluating operating systems for mobile devices. Designed and produced by the project mobile application on Android OS as an electronic medical record on a Tablet PC Acer.

  10. NOD1CARD Might Be Using Multiple Interfaces for RIP2-Mediated CARD-CARD Interaction: Insights from Molecular Dynamics Simulation.

    Directory of Open Access Journals (Sweden)

    Jitendra Maharana

    Full Text Available The nucleotide-binding and oligomerization domain (NOD-containing protein 1 (NOD1 plays the pivotal role in host-pathogen interface of innate immunity and triggers immune signalling pathways for the maturation and release of pro-inflammatory cytokines. Upon the recognition of iE-DAP, NOD1 self-oligomerizes in an ATP-dependent fashion and interacts with adaptor molecule receptor-interacting protein 2 (RIP2 for the propagation of innate immune signalling and initiation of pro-inflammatory immune responses. This interaction (mediated by NOD1 and RIP2 helps in transmitting the downstream signals for the activation of NF-κB signalling pathway, and has been arbitrated by respective caspase-recruitment domains (CARDs. The so-called CARD-CARD interaction still remained contradictory due to inconsistent results. Henceforth, to understand the mode and the nature of the interaction, structural bioinformatics approaches were employed. MD simulation of modelled 1:1 heterodimeric complexes revealed that the type-Ia interface of NOD1CARD and the type-Ib interface of RIP2CARD might be the suitable interfaces for the said interaction. Moreover, we perceived three dynamically stable heterotrimeric complexes with an NOD1:RIP2 ratio of 1:2 (two numbers and 2:1. Out of which, in the first trimeric complex, a type-I NOD1-RIP2 heterodimer was found interacting with an RIP2CARD using their type-IIa and IIIa interfaces. However, in the second and third heterotrimer, we observed type-I homodimers of NOD1 and RIP2 CARDs were interacting individually with RIP2CARD and NOD1CARD (in type-II and type-III interface, respectively. Overall, this study provides structural and dynamic insights into the NOD1-RIP2 oligomer formation, which will be crucial in understanding the molecular basis of NOD1-mediated CARD-CARD interaction in higher and lower eukaryotes.

  11. The FTK to Level-2 Interface Card (FLIC)

    CERN Document Server

    Wang, R.; The ATLAS collaboration; Auerbach, Benjamin; Blair, Robert; Drake, Gary; Love, Jeremy; Proudfoot, James; Anderson, J.; Zhang, Jinlong

    2016-01-01

    The FTK to Level-2 Interface Card (FLIC) of the ATLAS Fast TracKer (FTK) trigger upgrade is the final component in the FTK chain of custom electronics. The FTK performs full event tracking using the ATLAS Silicon detectors for every Level-1(L1) accepted event at 100 kHz. The FLIC is a custom Advanced Telecommunications Architecture (ATCA) card that interfaces the upstream FTK system with the ATLAS trigger and data acquisition (TDAQ) system, and allows for event processing on commercial PC blades making use of the 10 GB Ethernet full mesh ATCA back-plane. The FLIC receives data on 8 optical links at a bandwidth of about 1 Gbps per channel, reformats the data to the ATLAS standard record format, and performs the conversion from local to global module identifier using look up tables in SRAM. After processing, the event records are sent out to the TDAQ system using the S-LINK protocol at 2 Gbps, with a latency of O(10 microseconds). The data processing is handled in two Xilinx Virtex-6 FPGAs, with two additional ...

  12. The FTK to Level-2 Interface Card (FLIC)

    CERN Document Server

    Anderson, John Thomas; The ATLAS collaboration; Drake, Gary; Love, Jeremy; Proudfoot, James; Wang, Rui; Zhang, Jinlong; Auerbach, Benjamin

    2015-01-01

    The FTK to Level-2 Interface Card (FLIC) of the ATLAS Fast TracKer (FTK) trigger upgrade is the final component in the FTK chain of custom electronics. The FTK performs full event tracking using the ATLAS Silicon detectors for every Level-1 accepted event at 100 kHz. The FLIC is a custom Advanced Telecommunications Architecture (ATCA) card that interfaces the upstream FTK system with the ATLAS trigger and data acquisition (TDAQ) system, and allows for event processing on commercial PC blades making use of the 10 GB Ethernet full mesh ATCA back-plane. The FLIC receives data on 8 optical links at a bandwidth of ~1 Gbps per channel, reformats the data to the ATLAS standard record format, and performs the conversion from local to global module identifier using look up tables in SRAM. After processing, the event records are sent out to the TDAQ system using the S-LINK protocol at 2 Gbps, with a latency of O(10 microseconds). The data processing is handled in two Xilinx Virtex-6 FPGAs, with two additional Virtex-6 ...

  13. LabVIEW Interface for PCI-SpaceWire Interface Card

    Science.gov (United States)

    Lux, James; Loya, Frank; Bachmann, Alex

    2005-01-01

    This software provides a LabView interface to the NT drivers for the PCISpaceWire card, which is a peripheral component interface (PCI) bus interface that conforms to the IEEE-1355/ SpaceWire standard. As SpaceWire grows in popularity, the ability to use SpaceWire links within LabVIEW will be important to electronic ground support equipment vendors. In addition, there is a need for a high-level LabVIEW interface to the low-level device- driver software supplied with the card. The LabVIEW virtual instrument (VI) provides graphical interfaces to support all (1) SpaceWire link functions, including message handling and routing; (2) monitoring as a passive tap using specialized hardware; and (3) low-level access to satellite mission-control subsystem functions. The software is supplied in a zip file that contains LabVIEW VI files, which provide various functions of the PCI-SpaceWire card, as well as higher-link-level functions. The VIs are suitably named according to the matching function names in the driver manual. A number of test programs also are provided to exercise various functions.

  14. Penerapan Metoda Serial Peripheral Interface (SPI pada Rancang Bangun Data Logger berbasis SD card

    Directory of Open Access Journals (Sweden)

    RATNA SUSANA

    2018-03-01

    Full Text Available ABSTRAK Serial Peripheral Interface (SPI adalah protokol komunikasi yang dapat digunakan sebagai interface komunikasi antara mikrokontroler dengan SD Card. Dengan menerapkan metoda SPI pada data logger berbasis SD Card, maka dapat diketahui karakteristik protokol komunikasi SPI antara mikrokontroler dengan SD Card. SD Card diformat dengan tipe FAT 16, dan data di dalam SD Card berupa sekumpulan paket data sensor yang diambil secara periodik dan disimpan dalam bentuk file dengan format.csv. Berdasarkan format paket data sensor yang dibuat, dapat dihitungwaktu perekaman data yang diperlukan agar kapasitas SD Card terisi penuh oleh data sensor. Hasil penelitian menunjukkan,bahwa metoda SPI yang diterapkan pada penelitian ini memiliki sifat akan melakukan pemeriksaan berulang pada pin MISO terhadap command yang dikirimkan oleh mikrokontroler melalui pin MOSI. Proses read/write data pada SD Card data logger memiliki keberhasilan 100%, karena SD Card telah terinisialisasi dalam mode SPI melalui perintah reset dan init SD Card. Komunikasi ini dapat dilakukan dengan menggunakan crystal 4 Mhz – 20 Mhz. Untuk pengujian konfigurasi SPI, hanya Independent Slave Configuration yang dapat digunakan pada komunikasi SPI dengan 2 SD card sebagai slave. Kata kunci: Serial Peripheral Interface (SPI, Data Logger, SD card, FAT16 ABSTRACT Serial Peripheral Interface (SPI is a communication protocol that can be applied as a communication interface between microcontroller to SD Card. By implementing the SPI method to a data logger based on SD Card, it can be known the characteristics of the SPI communications protocol between microcontroller to SD Card. SD Card formatted in FAT 16 type, and data on the SD Card is the form of sensor data packets collection which be captured periodically and saved in .csv format file. Based on the sensor data packet format is created, it can be calculated recording time data required so that the SD Card capacity completely filled by the

  15. Multiple network interface core apparatus and method

    Science.gov (United States)

    Underwood, Keith D [Albuquerque, NM; Hemmert, Karl Scott [Albuquerque, NM

    2011-04-26

    A network interface controller and network interface control method comprising providing a single integrated circuit as a network interface controller and employing a plurality of network interface cores on the single integrated circuit.

  16. 76 FR 76475 - Employment Network (EN) Report Card

    Science.gov (United States)

    2011-12-07

    ... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2011-0096] Employment Network (EN) Report Card AGENCY: Social Security Administration. ACTION: Notice of Webinar and National Teleconference Call Listening Sessions--Announcing Two Opportunities for SSA to Hear Public Comments on Draft Revised Ticket to...

  17. Collecting Social Network Data from Mobile Phone SIM Cards

    Science.gov (United States)

    Peseckas, Ryan

    2016-01-01

    I used a subscriber identity module card reader to copy the lists of saved contacts from 170 mobile phones in Fiji. This approach has both advantages and disadvantages compared to other techniques for collecting telephone network data. Copying phone contacts avoids recall biases associated with survey-based name generators. It also obviates the…

  18. Interface card for NMR data acquisition; Cartao de aquisicao de dados para RMN

    Energy Technology Data Exchange (ETDEWEB)

    Torre Neto, Andre; Colnago, Luiz Alberto [Empresa Brasileira de Pesquisa Agropecuaria (EMBRAPA), Sao Carlos, SP (Brazil). Nucleo de Pesquisa e Desenvolvimento de Instrumentacao Agropecuaria

    1992-12-31

    A NMR spectrometer constructed by NPDIA is being used for analysis of seed oil contents in projects of oil seeds improvement. Some improvements have been introduced in this spectrometer, and this work presents an IBM-Pc compatible interface card. This interface has some characteristics which are exclusive for NMR 6 refs., 3 figs.

  19. Multi parametric card to personal computers interface based in ispLSI1016 circuits

    International Nuclear Information System (INIS)

    Osorio Deliz, J.F.; Toledo Acosta, R.B.; Arista Romeu, E.

    1997-01-01

    It is described the design and principal characteristic of the interface circuit for a 16 bit multi parametric add on card for IBM or compatible microcomputer which content two communication channels of direct memory access and bidirectional between the card and the computer, an interrupt controller, a programmable address register, a default add res register of the card, a four channels multiplexer, as well as the decoder logic of the 80C186 and computer. The circuit was designed with two programmable logic devices ispL1016, which allowed drastically to diminish the quantity of utilized components and get a more flexible design in less time better characteristics

  20. Towards software-based signature detection for intrusion prevention on the network card

    NARCIS (Netherlands)

    Bos, H.; Huang, Kaiming

    2006-01-01

    CardGuard is a signature detection system for intrusion detection and prevention that scans the entire payload of packets for suspicious patterns and is implemented in software on a network card equiped with an Intel IXP1200 network processor. One card can be used to protect either a single host, or

  1. Rule extraction from minimal neural networks for credit card screening.

    Science.gov (United States)

    Setiono, Rudy; Baesens, Bart; Mues, Christophe

    2011-08-01

    While feedforward neural networks have been widely accepted as effective tools for solving classification problems, the issue of finding the best network architecture remains unresolved, particularly so in real-world problem settings. We address this issue in the context of credit card screening, where it is important to not only find a neural network with good predictive performance but also one that facilitates a clear explanation of how it produces its predictions. We show that minimal neural networks with as few as one hidden unit provide good predictive accuracy, while having the added advantage of making it easier to generate concise and comprehensible classification rules for the user. To further reduce model size, a novel approach is suggested in which network connections from the input units to this hidden unit are removed by a very straightaway pruning procedure. In terms of predictive accuracy, both the minimized neural networks and the rule sets generated from them are shown to compare favorably with other neural network based classifiers. The rules generated from the minimized neural networks are concise and thus easier to validate in a real-life setting.

  2. The autoinhibitory CARD2-Hel2i Interface of RIG-I governs RNA selection.

    Science.gov (United States)

    Ramanathan, Anand; Devarkar, Swapnil C; Jiang, Fuguo; Miller, Matthew T; Khan, Abdul G; Marcotrigiano, Joseph; Patel, Smita S

    2016-01-29

    RIG-I (Retinoic Acid Inducible Gene-I) is a cytosolic innate immune receptor that detects atypical features in viral RNAs as foreign to initiate a Type I interferon signaling response. RIG-I is present in an autoinhibited state in the cytoplasm and activated by blunt-ended double-stranded (ds)RNAs carrying a 5' triphosphate (ppp) moiety. These features found in many pathogenic RNAs are absent in cellular RNAs due to post-transcriptional modifications of RNA ends. Although RIG-I is structurally well characterized, the mechanistic basis for RIG-I's remarkable ability to discriminate between cellular and pathogenic RNAs is not completely understood. We show that RIG-I's selectivity for blunt-ended 5'-ppp dsRNAs is ≈3000 times higher than non-blunt ended dsRNAs commonly found in cellular RNAs. Discrimination occurs at multiple stages and signaling RNAs have high affinity and ATPase turnover rate and thus a high katpase/Kd. We show that RIG-I uses its autoinhibitory CARD2-Hel2i (second CARD-helicase insertion domain) interface as a barrier to select against non-blunt ended dsRNAs. Accordingly, deletion of CARDs or point mutations in the CARD2-Hel2i interface decreases the selectivity from ≈3000 to 150 and 750, respectively. We propose that the CARD2-Hel2i interface is a 'gate' that prevents cellular RNAs from generating productive complexes that can signal. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

  3. ID card number detection algorithm based on convolutional neural network

    Science.gov (United States)

    Zhu, Jian; Ma, Hanjie; Feng, Jie; Dai, Leiyan

    2018-04-01

    In this paper, a new detection algorithm based on Convolutional Neural Network is presented in order to realize the fast and convenient ID information extraction in multiple scenarios. The algorithm uses the mobile device equipped with Android operating system to locate and extract the ID number; Use the special color distribution of the ID card, select the appropriate channel component; Use the image threshold segmentation, noise processing and morphological processing to take the binary processing for image; At the same time, the image rotation and projection method are used for horizontal correction when image was tilting; Finally, the single character is extracted by the projection method, and recognized by using Convolutional Neural Network. Through test shows that, A single ID number image from the extraction to the identification time is about 80ms, the accuracy rate is about 99%, It can be applied to the actual production and living environment.

  4. SMART INTERFACE: FERRAMENTA DE AUXÍLIO AO DESENVOLVIMENTO DE APLICAÇÕES JAVA CARD

    Directory of Open Access Journals (Sweden)

    Leonardo Ataíde Minora

    2008-05-01

    Full Text Available Com a evolução da tecnologia de microprocessadores, hoje é possível colocar um minúsculo chip em um cartão de plástico, nas dimensões de um cartão de crédito convencional. Chip este com capacidade de armazenamento de informação e processamento. Esse tipo de cartão é chamado de Smart Card. É possível desenvolver aplicações para esses cartões utilizando um subconjunto da plataforma Java – Java Card. O subconjunto da plataforma Java para o desenvolvimento de aplicações próprias para executar em Smart Cards é bastante limitado, em virtude das limitações do hardware envolvido. O desenvolvimento deste tipo de aplicação implica invariavelmente em se trabalhar no nível de bytes, pois toda a comunicação com o cartão acontece através de APDUs (Applicaion Protocol Data Unit montadas como uma sequência de bytes. Para auxiliar nesse trabalho, foi desenvolvido o SMART SHELL: ferramenta, modo texto, que interpreta comandos para a interação com a aplicação gerente do cartão – card manager. Os objetivos deste trabalho são: aperfeiçoar as funcionalidades do SMART SHELL e desenvolver uma interface gráfica para o mesmo, denominada de SMART INTERFACE. A aplicação em questão visa oferecer ao desenvolvedor de aplicações Java Card um mecanismo simples e ágil para a realização de atividades comuns de manipulação de um cartão, tais como: (1 realizar o processo de autenticação para operar com o card manager, (2 listar as aplicações – applets Java Card – instalados em um cartão, (3 preparar uma aplicação para ser instalada em um cartão, (4 instalação de uma aplicação no cartão, (5 remoção de uma aplicação instalada no cartão, entre outras. Para a realização do trabalho serão seguida a seguinte metodologia: levantamento bibliográfico sobre o tema; definição dos aperfeiçoamentos necessários ao SMART SHELL; implementação dos aperfeiçoamentos propostos; e implementação da interface gr

  5. A SECURE MESSAGE TRANSMISSION SYSTEM ARCHITECTURE FOR COMPUTER NETWORKS EMPLOYING SMART CARDS

    Directory of Open Access Journals (Sweden)

    Geylani KARDAŞ

    2008-01-01

    Full Text Available In this study, we introduce a mobile system architecture which employs smart cards for secure message transmission in computer networks. The use of smart card provides two security services as authentication and confidentiality in our design. The security of the system is provided by asymmetric encryption. Hence, smart cards are used to store personal account information as well as private key of each user for encryption / decryption operations. This offers further security, authentication and mobility to the system architecture. A real implementation of the proposed architecture which utilizes the JavaCard technology is also discussed in this study.

  6. Interfaces for a simple local network

    International Nuclear Information System (INIS)

    Nekhanevich, Eh.L.; Yasenev, M.V.

    1988-01-01

    A system of communication and interfaces for a simple local network of computers is described. The data on technical parameters, fields of application and operation features of the interfaces developed are presented. The data indispensable for the development of software are given. The experience in operation of the subsystem of software for remote terminal computers which makes use of the above interfaces is briefly presented. 7 refs.; 3 figs

  7. Wireless network interface energy consumption implications of popular streaming formats

    Science.gov (United States)

    Chandra, Surendar

    2001-12-01

    With the proliferation of mobile streaming multimedia, available battery capacity constrains the end-user experience. Since streaming applications tend to be long running, wireless network interface card's (WNIC) energy consumption is particularly an acute problem. In this work, we explore the WNIC energy consumption implications of popular multimedia streaming formats from Microsoft (Windows media), Real (Real media) and Apple (Quick Time). We investigate the energy consumption under varying stream bandwidth and network loss rates. We also explore history-based client-side strategies to reduce the energy consumed by transitioning the WNICs to a lower power consuming sleep state. We show that Microsoft media tends to transmit packets at regular intervals; streams optimized for 28.8 Kbps can save over 80% in energy consumption with 2% data loss. A high bandwidth stream (768 Kbps) can still save 57% in energy consumption with less than 0.3% data loss. For high bandwidth streams, Microsoft media exploits network-level packet fragmentation, which can lead to excessive packet loss (and wasted energy) in a lossy network. Real stream packets tend to be sent closer to each other, especially at higher bandwidths. Quicktime packets sometimes arrive in quick succession; most likely an application level fragmentation mechanism. Such packets are harder to predict at the network level without understanding the packet semantics.

  8. Credit card fraud detection using neural network and geolocation

    Science.gov (United States)

    Gulati, Aman; Dubey, Prakash; MdFuzail, C.; Norman, Jasmine; Mangayarkarasi, R.

    2017-11-01

    The most acknowledged payment mode is credit card for both disconnected and online mediums in today's day and age. It facilitates cashless shopping everywhere in the world. It is the most widespread and reasonable approach with regards to web based shopping, paying bills, what's more, performing other related errands. Thus danger of fraud exchanges utilizing credit card has likewise been expanding. In the Current Fraud Detection framework, false exchange is recognized after the transaction is completed. As opposed to the current system, the proposed system presents a methodology which facilitates the detection of fraudulent exchanges while they are being processed, this is achieved by means of Behaviour and Locational Analysis(Neural Logic) which considers a cardholder's way of managing money and spending pattern. A deviation from such a pattern will then lead to the system classifying it as suspicious transaction and will then be handled accordingly.

  9. Smart Cards and Card Operating Systems

    NARCIS (Netherlands)

    Hartel, Pieter H.; Bartlett, J.; de Jong, Eduard K.

    The operating system of an IC card should provide an appropriate interface to applications using IC cards. An incorrect choice of operations and data renders the card inefficient and cumbersome. The design principles of the UNIX operating system are most appropriate for IC card operating system

  10. An architecture for human-network interfaces

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.

    1990-01-01

    Some of the issues (and their consequences) that arise when human-network interfaces (HNIs) are viewed from the perspective of people who use and develop them are examined. Target attributes of HNI architecture are presented. A high-level architecture model that supports the attributes is discussed...

  11. Network device interface for digitally interfacing data channels to a controller via a network

    Science.gov (United States)

    Ellerbrock, Philip J. (Inventor); Grant, Robert L. (Inventor); Konz, Daniel W. (Inventor); Winkelmann, Joseph P. (Inventor)

    2009-01-01

    A communications system and method are provided for digitally connecting a plurality of data channels, such as sensors, actuators, and subsystems, to a controller using a network bus. The network device interface interprets commands and data received from the controller and polls the data channels in accordance with these commands. Specifically, the network device interface receives digital commands and data from the controller, and based on these commands and data, communicates with the data channels to either retrieve data in the case of a sensor or send data to activate an actuator. Data retrieved from the sensor is converted into digital signals and transmitted to the controller. Network device interfaces associated with different data channels can coordinate communications with the other interfaces based on either a transition in a command message sent by the bus controller or a synchronous clock signal.

  12. A network-based Macintosh serial host interface program

    International Nuclear Information System (INIS)

    Wight, J.

    1991-03-01

    A program has been written for the Apple Macintosh to replace conventional host RS232 terminals with customizable user interfaces. Serial port NuBus cards in the Macintosh allow many simultaneous sessions to be maintained. A powerful system is attained by connecting multiple Macintoshes on a network, each running this program. Each is then able to share incoming data from any of its serial ports with any other Macintosh, as well as accept data from any other Macintosh for output to any of its serial ports. The program has been used to eliminate multiple host terminals, modernize the user interface, and to centralize operation of a complex control system. Minimal changes to host software have been required. By making extensive use of Macintosh resources, the same executable code serves in a variety of roles. An object oriented C language with a class library made the development straightforward and easy to modify. This program is used to control a 2 MW neutral beam system on the DIII-D magnetic fusion tokamak. 7 figs

  13. Ecological Interface Design for Computer Network Defense.

    Science.gov (United States)

    Bennett, Kevin B; Bryant, Adam; Sushereba, Christen

    2018-05-01

    A prototype ecological interface for computer network defense (CND) was developed. Concerns about CND run high. Although there is a vast literature on CND, there is some indication that this research is not being translated into operational contexts. Part of the reason may be that CND has historically been treated as a strictly technical problem, rather than as a socio-technical problem. The cognitive systems engineering (CSE)/ecological interface design (EID) framework was used in the analysis and design of the prototype interface. A brief overview of CSE/EID is provided. EID principles of design (i.e., direct perception, direct manipulation and visual momentum) are described and illustrated through concrete examples from the ecological interface. Key features of the ecological interface include (a) a wide variety of alternative visual displays, (b) controls that allow easy, dynamic reconfiguration of these displays, (c) visual highlighting of functionally related information across displays, (d) control mechanisms to selectively filter massive data sets, and (e) the capability for easy expansion. Cyber attacks from a well-known data set are illustrated through screen shots. CND support needs to be developed with a triadic focus (i.e., humans interacting with technology to accomplish work) if it is to be effective. Iterative design and formal evaluation is also required. The discipline of human factors has a long tradition of success on both counts; it is time that HF became fully involved in CND. Direct application in supporting cyber analysts.

  14. Reconfigurable-logic-based fiber channel network card

    Science.gov (United States)

    Casselman, Steve

    1996-10-01

    Currently all networking hardware must have predefined tradeoffs between latency and bandwidth. In some applications one feature is more important than the other. We present a system where the tradeoff can be made on a case by case basis. To show this we implement an extremely low latency semaphore passing network within a point to point system.

  15. A Simple Neural Network System for Wisconsin Card Sorting Test

    National Research Council Canada - National Science Library

    Kaplan, Gulay

    2001-01-01

    .... A simple model based on winner take all network and multi layer perceptron suffices to model the affect of frontal lobe damage, which leads to perseveration as diminishing the influence of reinforcement...

  16. Improving Biometric-Based Authentication Schemes with Smart Card Revocation/Reissue for Wireless Sensor Networks.

    Science.gov (United States)

    Moon, Jongho; Lee, Donghoon; Lee, Youngsook; Won, Dongho

    2017-04-25

    User authentication in wireless sensor networks is more difficult than in traditional networks owing to sensor network characteristics such as unreliable communication, limited resources, and unattended operation. For these reasons, various authentication schemes have been proposed to provide secure and efficient communication. In 2016, Park et al. proposed a secure biometric-based authentication scheme with smart card revocation/reissue for wireless sensor networks. However, we found that their scheme was still insecure against impersonation attack, and had a problem in the smart card revocation/reissue phase. In this paper, we show how an adversary can impersonate a legitimate user or sensor node, illegal smart card revocation/reissue and prove that Park et al.'s scheme fails to provide revocation/reissue. In addition, we propose an enhanced scheme that provides efficiency, as well as anonymity and security. Finally, we provide security and performance analysis between previous schemes and the proposed scheme, and provide formal analysis based on the random oracle model. The results prove that the proposed scheme can solve the weaknesses of impersonation attack and other security flaws in the security analysis section. Furthermore, performance analysis shows that the computational cost is lower than the previous scheme.

  17. Network security system for health and medical information using smart IC card

    Science.gov (United States)

    Kanai, Yoichi; Yachida, Masuyoshi; Yoshikawa, Hiroharu; Yamaguchi, Masahiro; Ohyama, Nagaaki

    1998-07-01

    A new network security protocol that uses smart IC cards has been designed to assure the integrity and privacy of medical information in communication over a non-secure network. Secure communication software has been implemented as a library based on this protocol, which is called the Integrated Secure Communication Layer (ISCL), and has been incorporated into information systems of the National Cancer Center Hospitals and the Health Service Center of the Tokyo Institute of Technology. Both systems have succeeded in communicating digital medical information securely.

  18. Non-visual Interfaces and Network Games for Blind Users

    OpenAIRE

    Ina, Satoshi

    2002-01-01

    Visually impaired people have difficulty with communication of graphical information. It is to be more difficult for them to work/play in cooperation with sighted people at a distance. We developed a non-visual access method to a graphical screen through tactile and auditory sense, and applied it into network board/card games as a joint workspace for blind and sighted users via communication of image, sound, and voice. We took an "IGO" type boardgame and a Card game "SEVENS" as sample subject...

  19. The FEROL40, a microTCA card interfacing custom point-to-point links and standard TCP/IP

    CERN Document Server

    Gigi, Dominique; Behrens, Ulf; Branson, James; Chaze, Olivier; Cittolin, Sergio; Contescu, Cristian; da Silva Gomes, Diego; Darlea, Georgiana-Lavinia; Deldicque, Christian; Demiragli, Zeynep; Dobson, Marc; Doualot, Nicolas; Erhan, Samim; Fulcher, Jonathan Richard; Gladki, Maciej; Glege, Frank; Gomez-Ceballos, Guillelmo; Hegeman, Jeroen; Holzner, Andre; Janulis, Mindaugas; Lettrich, Michael; Meijers, Frans; Meschi, Emilio; Mommsen, Remigius K; Morovic, Srecko; O'Dell, Vivian; Orn, Samuel Johan; Orsini, Luciano; Papakrivopoulos, Ioannis; Paus, Christoph; Petrova, Petia; Petrucci, Andrea; Pieri, Marco; Rabady, Dinyar; Racz, Attila; Reis, Thomas; Sakulin, Hannes; Schwick, Christoph; Simelevicius, Dainius; Vazquez Velez, Cristina; Vougioukas, Michail; Zejdl, Petr

    2017-01-01

    In order to accommodate new back-end electronics of upgraded CMS sub-detectors, a new FEROL40 card in the microTCA standard has been developed. The main function of the FEROL40 is to acquire event data over multiple point-to-point serial optical links, provide buffering, perform protocol conversion, and transmit multiple TCP/IP streams (4x10Gbps) to the Ethernet network of the aggregation layer of the CMS DAQ (data acquisition) event builder. This contribution discusses the design of the FEROL40 and experience from operation.

  20. The Schultz MIDI Benchmarking Toolbox for MIDI interfaces, percussion pads, and sound cards

    NARCIS (Netherlands)

    Schultz, Benjamin G

    2018-01-01

    The Musical Instrument Digital Interface (MIDI) was readily adopted for auditory sensorimotor synchronization experiments. These experiments typically use MIDI percussion pads to collect responses, a MIDI-USB converter (or MIDI-PCI interface) to record responses on a PC and manipulate feedback, and

  1. The Internet and healthcare in Taiwan: value-added applications on the medical network in the National Health Insurance smart card system.

    Science.gov (United States)

    Tsai, Wen-Hsien; Kuo, Hsiao-Chiao

    2007-01-01

    The introduction of smart card technology has ushered in a new era of electronic medical information systems. Taiwan's Bureau of National Health Insurance (BNHI) implemented the National Health Insurance (NHI) smart card project in 2004. The purpose of the project was to replace all paper cards with one smart card. The NHI medical network now provides three kinds of services. In this paper, we illustrate the status of the NHI smart card system in Taiwan and propose three kinds of value-added applications for the medical network, which are electronic exchange of medical information, retrieval of personal medical records and medical e-learning for future development of health information systems.

  2. Identification of serial number on bank card using recurrent neural network

    Science.gov (United States)

    Liu, Li; Huang, Linlin; Xue, Jian

    2018-04-01

    Identification of serial number on bank card has many applications. Due to the different number printing mode, complex background, distortion in shape, etc., it is quite challenging to achieve high identification accuracy. In this paper, we propose a method using Normalization-Cooperated Gradient Feature (NCGF) and Recurrent Neural Network (RNN) based on Long Short-Term Memory (LSTM) for serial number identification. The NCGF maps the gradient direction elements of original image to direction planes such that the RNN with direction planes as input can recognize numbers more accurately. Taking the advantages of NCGF and RNN, we get 90%digit string recognition accuracy.

  3. Internal Interface Diversification as a Security Measure in Sensor Networks

    Directory of Open Access Journals (Sweden)

    Sampsa Rauti

    2018-03-01

    Full Text Available More actuator and sensor devices are connected to the Internet of Things (IoT every day, and the network keeps growing, while software security of the devices is often incomplete. Sensor networks and the IoT in general currently cover a large number of devices with an identical internal interface structure. By diversifying the internal interfaces, the interfaces on each node of the network are made unique, and it is possible to break the software monoculture of easily exploitable identical systems. This paper proposes internal interface diversification as a security measure for sensor networks. We conduct a study on diversifiable internal interfaces in 20 IoT operating systems. We also present two proof-of-concept implementations and perform experiments to gauge the feasibility in the IoT environment. Internal interface diversification has practical limitations, and not all IoT operating systems have that many diversifiable interfaces. However, because of low resource requirements, compatibility with other security measures and wide applicability to several interfaces, we believe internal interface diversification is a promising and effective approach for securing nodes in sensor networks.

  4. High-resolution method for evolving complex interface networks

    Science.gov (United States)

    Pan, Shucheng; Hu, Xiangyu Y.; Adams, Nikolaus A.

    2018-04-01

    In this paper we describe a high-resolution transport formulation of the regional level-set approach for an improved prediction of the evolution of complex interface networks. The novelty of this method is twofold: (i) construction of local level sets and reconstruction of a global level set, (ii) local transport of the interface network by employing high-order spatial discretization schemes for improved representation of complex topologies. Various numerical test cases of multi-region flow problems, including triple-point advection, single vortex flow, mean curvature flow, normal driven flow, dry foam dynamics and shock-bubble interaction show that the method is accurate and suitable for a wide range of complex interface-network evolutions. Its overall computational cost is comparable to the Semi-Lagrangian regional level-set method while the prediction accuracy is significantly improved. The approach thus offers a viable alternative to previous interface-network level-set method.

  5. A generic service interfacing approach for home networking

    NARCIS (Netherlands)

    Chen, S.; Lukkien, J.J.; Bosman, R.P.; Verhoeven, R.

    2010-01-01

    This paper presents a generic service interfacing approach which enables the interoperability of networked devices and the reusability of services. Services are specified through a set of interfaces which are language and deployment platform independent. External service orchestration is applied to

  6. Integrated computer network high-speed parallel interface

    International Nuclear Information System (INIS)

    Frank, R.B.

    1979-03-01

    As the number and variety of computers within Los Alamos Scientific Laboratory's Central Computer Facility grows, the need for a standard, high-speed intercomputer interface has become more apparent. This report details the development of a High-Speed Parallel Interface from conceptual through implementation stages to meet current and future needs for large-scle network computing within the Integrated Computer Network. 4 figures

  7. A Network-Based Data Envelope Analysis Model in a Dynamic Balanced Score Card

    Directory of Open Access Journals (Sweden)

    Mojtaba Akbarian

    2015-01-01

    Full Text Available Performance assessment during the time and along with strategies is the most important requirements of top managers. To assess the performance, a balanced score card (BSC along with strategic goals and a data envelopment analysis (DEA are used as powerful qualitative and quantitative tools, respectively. By integrating these two models, their strengths are used and their weaknesses are removed. In this paper, an integrated framework of the BSC and DEA models is proposed for measuring the efficiency during the time and along with strategies based on the time delay of the lag key performance indicators (KPIs of the BSC model. The causal relationships during the time among perspectives of the BSC model are drawn as dynamic BSC at first. Then, after identifying the network-DEA structure, a new objective function for measuring the efficiency of nine subsidiary refineries of the National Iranian Oil Refining and Distribution Company (NIORDC during the time and along with strategies is developed.

  8. New Optical Card for Sneaker’s Network in Place of Electronic Clinical Record

    Science.gov (United States)

    Goto, Kenya; Satsukawa, Takatoshi; Chiba, Seisho; Ohmori, Takaaki

    2006-02-01

    In order to solve problems in electronic medical records, a new optical card of the digital versatile disk (DVD) type with higher capacity and lower cost than conventional compact disc recording (CD-R)-type cards has been developed, which is thinner, stronger and wearable like a credit card.

  9. Smart Card

    Directory of Open Access Journals (Sweden)

    Floarea NASTASE

    2006-01-01

    Full Text Available Reforms in electronic business have presented new opportunities to use smart card technology as an enabling tool. The network-centric applications, where resources are located throughout the Internet and access to them is possible from any location, require authenticated access and secured transactions. Smart cards represent an ideal solution: they offers an additional layer of electronic security and information assurance for user authentication, confidentiality, non-repudiation, information integrity, physical access control to facilities, and logical access control to an computer systems.

  10. Flexible Transport Network Expansion via Open WDM Interfaces

    DEFF Research Database (Denmark)

    Fagertun, Anna Manolova; Skjoldstrup, Bjarke

    2013-01-01

    This paper presents a successful test-bed implementation of a multi-vendor transport network interconnection via open WDM interfaces. The concept of applying Alien Wavelengths (AWs) for network expansion was successfully illustrated via deployment of multi-domain/multi-vendor end-to-end OTN servi...

  11. Interfacing Network Simulations and Empirical Data

    Science.gov (United States)

    2009-05-01

    contraceptive innovations in the Cameroon. He found that real-world adoption rates did not follow simulation models when the network relationships were...Analysis of the Coevolution of Adolescents ’ Friendship Networks, Taste in Music, and Alcohol Consumption. Methodology, 2: 48-56. Tichy, N.M., Tushman

  12. Network Interface Specification for the T1 Microprocessor

    Science.gov (United States)

    1994-05-01

    details of the data transfer functional units, interconnect structure, and network operation. Application Layer Communication Model Communication...use of the communication resources. 3.6 Network Virtualisation The CNS-1 is designed for single-user, batch-style processing; no timesharing or space...matches the count register (both the timer and count register are in the network interface and are user-accessible). Although this function is not strictly

  13. Graphical user interface for wireless sensor networks simulator

    Science.gov (United States)

    Paczesny, Tomasz; Paczesny, Daniel; Weremczuk, Jerzy

    2008-01-01

    Wireless Sensor Networks (WSN) are currently very popular area of development. It can be suited in many applications form military through environment monitoring, healthcare, home automation and others. Those networks, when working in dynamic, ad-hoc model, need effective protocols which must differ from common computer networks algorithms. Research on those protocols would be difficult without simulation tool, because real applications often use many nodes and tests on such a big networks take much effort and costs. The paper presents Graphical User Interface (GUI) for simulator which is dedicated for WSN studies, especially in routing and data link protocols evaluation.

  14. Optical label-controlled transparent metro-access network interface

    DEFF Research Database (Denmark)

    Osadchiy, Alexey Vladimirovich

    This thesis presents results obtained during the course of my PhD research on optical signal routing and interfacing between the metropolitan and access segments of optical networks. Due to both increasing capacity demands and variety of emerging services types, new technological challenges...... control. Highlights of my research include my proposal and experimental proof of principle of an optical coherent detection based optical access network architecture providing support for a large number of users over a single distribution fiber; a spectral amplitude encoded label detection technique...... are arising for seamlessly interfacing metropolitan and access networks. Therefore, in this PhD project, I have analyzed those technological challenges and identified the key aspects to be addressed. I have also proposed and experimentally verified a number of solutions to metropolitan and access networks...

  15. The Portals 4.0 network programming interface.

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, Brian W.; Brightwell, Ronald Brian; Pedretti, Kevin; Wheeler, Kyle Bruce; Hemmert, Karl Scott; Riesen, Rolf E.; Underwood, Keith Douglas; Maccabe, Arthur Bernard; Hudson, Trammell B.

    2012-11-01

    This report presents a specification for the Portals 4.0 network programming interface. Portals 4.0 is intended to allow scalable, high-performance network communication between nodes of a parallel computing system. Portals 4.0 is well suited to massively parallel processing and embedded systems. Portals 4.0 represents an adaption of the data movement layer developed for massively parallel processing platforms, such as the 4500-node Intel TeraFLOPS machine. Sandias Cplant cluster project motivated the development of Version 3.0, which was later extended to Version 3.3 as part of the Cray Red Storm machine and XT line. Version 4.0 is targeted to the next generation of machines employing advanced network interface architectures that support enhanced offload capabilities.

  16. The portals 4.0.1 network programming interface.

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, Brian W.; Brightwell, Ronald Brian; Pedretti, Kevin; Wheeler, Kyle Bruce; Hemmert, Karl Scott; Riesen, Rolf E.; Underwood, Keith Douglas; Maccabe, Arthur Bernard; Hudson, Trammell B.

    2013-04-01

    This report presents a specification for the Portals 4.0 network programming interface. Portals 4.0 is intended to allow scalable, high-performance network communication between nodes of a parallel computing system. Portals 4.0 is well suited to massively parallel processing and embedded systems. Portals 4.0 represents an adaption of the data movement layer developed for massively parallel processing platforms, such as the 4500-node Intel TeraFLOPS machine. Sandias Cplant cluster project motivated the development of Version 3.0, which was later extended to Version 3.3 as part of the Cray Red Storm machine and XT line. Version 4.0 is targeted to the next generation of machines employing advanced network interface architectures that support enhanced offload capabilities. 3

  17. Design of Fault Tolerant Network Interfaces for NoCs

    DEFF Research Database (Denmark)

    Fiorin, Leandro; Micconi, Laura; Sami, Mariagiovanna

    2011-01-01

    Networks-on-Chip (NoCs) appeared as a strategy to deal with the communication requirements of complex IP-based System-on-Chips. As the complexity of designs increases and the technology scales down into the deep-submicron domain, the probability of malfunctions and failures in the NoC components...... increases. This paper focuses on the study and evaluation of techniques for increasing reliability and resilience of Network Interfaces (NIs). NIs act as interfaces between IP cores and the communication infrastructure; a faulty behavior in them could affect therefore the overall system. In this work, we...... of the NI, while saving up to 83% in area with respect to a standard Triple Modular Redundancy implementation, as well as a significant energy reduction....

  18. The Portals 4.1 Network Programming Interface

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, Brian; Brightwell, Ronald B.; Grant, Ryan; Hemmert, Karl Scott; Pedretti, Kevin; Wheeler, Kyle; Underwood, Keith D; Riesen, Rolf; Maccabe, Arthur B.; Hudson, Trammel

    2017-04-01

    This report presents a specification for the Portals 4 networ k programming interface. Portals 4 is intended to allow scalable, high-performance network communication betwee n nodes of a parallel computing system. Portals 4 is well suited to massively parallel processing and embedded syste ms. Portals 4 represents an adaption of the data movement layer developed for massively parallel processing platfor ms, such as the 4500-node Intel TeraFLOPS machine. Sandia's Cplant cluster project motivated the development of Version 3.0, which was later extended to Version 3.3 as part of the Cray Red Storm machine and XT line. Version 4 is tar geted to the next generation of machines employing advanced network interface architectures that support enh anced offload capabilities.

  19. The use of commercially available PC-interface cards for elemental mapping in small samples using XRF

    International Nuclear Information System (INIS)

    Abu Bakar bin Ghazali; Hoyes Garnet

    1991-01-01

    This paper demonstrates the use of ADC and reed relay cards to scan a small sample for acquiring data of X-ray fluorescence. The result shows the distribution of an element such as zinc content in the sample by means of colours, signifying the concentration

  20. STIMULUS: End-System Network Interface Controller for 100 Gb/s Wide Area Networks

    Energy Technology Data Exchange (ETDEWEB)

    Zarkesh-Ha, Payman [University of New Mexico

    2014-09-12

    The main goal of this research grant is to develop a system-level solution leveraging novel technologies that enable network communications at 100 Gb/s or beyond. University of New Mexico in collaboration with Acadia Optronics LLC has been working on this project to develop the 100 Gb/s Network Interface Controller (NIC) under this Department of Energy (DOE) grant.

  1. Software-defined network abstractions and configuration interfaces for building programmable quantum networks

    Energy Technology Data Exchange (ETDEWEB)

    Dasari, Venkat [U.S. Army Research Laboratory, Aberdeen Proving Ground, MD; Sadlier, Ronald J [ORNL; Geerhart, Mr. Billy [U.S. Army Research Laboratory, Aberdeen Proving Ground, MD; Snow, Nikolai [U.S. Army Research Laboratory, Aberdeen Proving Ground, MD; Williams, Brian P [ORNL; Humble, Travis S [ORNL

    2017-01-01

    Well-defined and stable quantum networks are essential to realize functional quantum applications. Quantum networks are complex and must use both quantum and classical channels to support quantum applications like QKD, teleportation, and superdense coding. In particular, the no-cloning theorem prevents the reliable copying of quantum signals such that the quantum and classical channels must be highly coordinated using robust and extensible methods. We develop new network abstractions and interfaces for building programmable quantum networks. Our approach leverages new OpenFlow data structures and table type patterns to build programmable quantum networks and to support quantum applications.

  2. Market structure and credit card pricing: what drives the interchange?

    OpenAIRE

    Zhu Wang

    2008-01-01

    This paper presents a model for the credit card industry, where oligopolistic card networks price their products in a complex marketplace with competing payment instruments, rational consumers/merchants, and competitive card issuers/acquirers. The analysis suggests that card networks demand higher interchange fees to maximize card issuers' profits as card payments become more efficient. At equilibrium, consumer rewards and card transaction volume also increase, while consumer surplus and merc...

  3. User interface on networked workstations for MFTF plasma diagnostic instruments

    International Nuclear Information System (INIS)

    Renbarger, V.L.; Balch, T.R.

    1985-01-01

    A network of Sun-2/170 workstations is used to provide an interface to the MFTF-B Plasma Diagnostics System at Lawrence Livermore National Laboratory. The Plasma Diagnostics System (PDS) is responsible for control of MFTF-B plasma diagnostic instrumentation. An EtherNet Local Area Network links the workstations to a central multiprocessing system which furnishes data processing, data storage and control services for PDS. These workstations permit a physicist to command data acquisition, data processing, instrument control, and display of results. The interface is implemented as a metaphorical desktop, which helps the operator form a mental model of how the system works. As on a real desktop, functions are provided by sheets of paper (windows on a CRT screen) called worksheets. The worksheets may be invoked by pop-up menus and may be manipulated with a mouse. These worksheets are actually tasks that communicate with other tasks running in the central computer system. By making entries in the appropriate worksheet, a physicist may specify data acquisition or processing, control a diagnostic, or view a result

  4. Design and implementation of interface units for high speed fiber optics local area networks and broadband integrated services digital networks

    Science.gov (United States)

    Tobagi, Fouad A.; Dalgic, Ismail; Pang, Joseph

    1990-01-01

    The design and implementation of interface units for high speed Fiber Optic Local Area Networks and Broadband Integrated Services Digital Networks are discussed. During the last years, a number of network adapters that are designed to support high speed communications have emerged. This approach to the design of a high speed network interface unit was to implement package processing functions in hardware, using VLSI technology. The VLSI hardware implementation of a buffer management unit, which is required in such architectures, is described.

  5. An Enhanced Dynamic Mutual Authentication Scheme for Smart Card Based Networks

    OpenAIRE

    S. Santhosh Baboo; K. Gokulraj

    2012-01-01

    Network security is the prevailing and challenging factor in computer communications. Computer security and communication security are interrelated and essential features in the internetworking system. Network security is ascertained by many factors like authentication, authorization, digital signatures, cryptography, steganography etc. Among them authentication is playing an important role in networked communications, where the communicating partners are to be identified each other legit...

  6. Payment Cards

    Directory of Open Access Journals (Sweden)

    Kantnerová Liběna

    2016-09-01

    Full Text Available The aim of this paper is to analyze the use of payment cards in retail in the Czech Republic from the side of clients (buyers and the side of sellers. Questionnaires for clients examine satisfaction with cards and the service connected with them. Sellers’ satisfaction with the profit and function of cards is analyzed. The data indicated that 92% of the 352 respondents in South Bohemia had a payment card and more than 35% had more than one card. In retail, 70% of sellers had a payment terminal.

  7. Design of a USB interface card for data transfer from a GRAETZ X5 DE debitmeter to a computer and improvement for the reading of the display

    International Nuclear Information System (INIS)

    Rakotonindrina, S.G.H.

    2014-01-01

    During the years 2005-2006, the GRAETZ X5 DE debitmeter of Madagascar-INSTN Radiation Protection Department has been under a partial blacking of its display. This is due to a long exposition of the device to solar radiation during its use in the field. For the resolution of this problem, we have inserted a complementary display. In order to improve the debitmeter display, an interface system has been designed between the computer USB port and the device by use of a microcontroller and shift registers. The USB interface card permits to display the dose debit to the microcomputer screen. In this way C and C sharp programs have been written by use of appropriate software. After the design and testing of the device in Madagascar-INSTN Secondary Standard Laboratory in Dosimetry (S.S.D.L), it has been found that the maximum difference between the dose measured values and the real value is 8%. So we can conclude that the device is functioning well. [fr

  8. Interface Assignment-Based AODV Routing Protocol to Improve Reliability in Multi-Interface Multichannel Wireless Mesh Networks

    Directory of Open Access Journals (Sweden)

    Won-Suk Kim

    2015-01-01

    Full Text Available The utilization of wireless mesh networks (WMNs has greatly increased, and the multi-interface multichannel (MIMC technic has been widely used for the backbone network. Unfortunately, the ad hoc on-demand distance vector (AODV routing protocol defined in the IEEE 802.11s standard was designed for WMNs using the single-interface single-channel technic. So, we define a problem that happens when the legacy AODV is used in MIMC WMNs and propose an interface assignment-based AODV (IA-AODV in order to resolve that problem. IA-AODV, which is based on multitarget path request, consists of the PREQ prediction scheme, the PREQ loss recovery scheme, and the PREQ sender assignment scheme. A detailed operation according to various network conditions and services is introduced, and the routing efficiency and network reliability of a network using IA-AODV are analyzed over the presented system model. Finally, after a real-world test-bed for MIMC WMNs using the IA-AODV routing protocol is implemented, the various indicators of the network are evaluated through experiments. When the proposed routing protocol is compared with the existing AODV routing protocol, it performs the path update using only 14.33% of the management frames, completely removes the routing malfunction, and reduces the UDP packet loss ratio by 0.0012%.

  9. 75 FR 49821 - Information Reporting for Payments Made in Settlement of Payment Card and Third Party Network...

    Science.gov (United States)

    2010-08-16

    ...-value cards (including gift cards). All of these provisions are retained in the final regulations... statutory definition are met. Electronic benefit transactions for the purchase of goods or services, made on... goods or services to (1) send a purchase invoice electronically to customers; and (2) accept payment...

  10. A Smart City Application: A Fully Controlled Street Lighting Isle Based on Raspberry-Pi Card, a ZigBee Sensor Network and WiMAX

    Directory of Open Access Journals (Sweden)

    Fabio Leccese

    2014-12-01

    Full Text Available A smart city application has been realized and tested. It is a fully remote controlled isle of lamp posts based on new technologies. It has been designed and organized in different hierarchical layers, which perform local activities to physically control the lamp posts and transmit information with another for remote control. Locally, each lamp post uses an electronic card for management and a ZigBee tlc network transmits data to a central control unit, which manages the whole isle. The central unit is realized with a Raspberry-Pi control card due to its good computing performance at very low price. Finally, a WiMAX connection was tested and used to remotely control the smart grid, thus overcoming the distance limitations of commercial Wi-Fi networks. The isle has been realized and tested for some months in the field.

  11. A smart city application: a fully controlled street lighting isle based on Raspberry-Pi card, a ZigBee sensor network and WiMAX.

    Science.gov (United States)

    Leccese, Fabio; Cagnetti, Marco; Trinca, Daniele

    2014-12-18

    A smart city application has been realized and tested. It is a fully remote controlled isle of lamp posts based on new technologies. It has been designed and organized in different hierarchical layers, which perform local activities to physically control the lamp posts and transmit information with another for remote control. Locally, each lamp post uses an electronic card for management and a ZigBee tlc network transmits data to a central control unit, which manages the whole isle. The central unit is realized with a Raspberry-Pi control card due to its good computing performance at very low price. Finally, a WiMAX connection was tested and used to remotely control the smart grid, thus overcoming the distance limitations of commercial Wi-Fi networks. The isle has been realized and tested for some months in the field.

  12. Playing the Smart Card.

    Science.gov (United States)

    Zuzack, Christine A.

    1997-01-01

    Enhanced magnetic strip cards and "smart cards" offer varied service options to college students. Enhanced magnetic strip cards serve as cash cards and provide access to services. Smart cards, which resemble credit cards but contain a microchip, can be used as phone cards, bus passes, library cards, admission tickets, point-of-sale debit…

  13. Payment card rewards programs and consumer payment choice

    OpenAIRE

    Andrew Ching; Fumiko Hayashi

    2006-01-01

    Card payments have been growing very rapidly. To continue the growth, payment card networks keep adding new merchants and card issuers try to stimulate their existing customers’ card usage by providing rewards. This paper seeks to analyze the effects of payment card rewards programs on consumer payment choice, by using consumer survey data. Specifically, we examine whether credit/debit reward receivers use credit/debit cards relatively more often than other consumers, if so how much more ofte...

  14. Wallet Card

    Data.gov (United States)

    U.S. Department of Health & Human Services — The CMS Office of Information Products and Data Analysis, OIPDA, produces the CMS Wallet Card as a quick reference statistical summary on annual CMS program and...

  15. Data transfer based on intelligent ethernet card

    International Nuclear Information System (INIS)

    Zhu Haitao; Chinese Academy of Sciences, Beijing; Chu Yuanping; Zhao Jingwei

    2007-01-01

    Intelligent Ethernet Cards are widely used in systems where the network throughout is very large, such as the DAQ systems for modern high energy physics experiments, web service. With the example of a commercial intelligent Ethernet card, this paper introduces the architecture, the principle and the process of intelligent Ethernet cards. In addition, the results of several experiments showing the differences between intelligent Ethernet cards and general ones are also presented. (authors)

  16. Design and implementation of an inter-agency, multi-mission space flight operations network interface

    Science.gov (United States)

    Byrne, R.; Scharf, M.; Doan, D.; Liu, J.; Willems, A.

    2004-01-01

    An advanced network interface was designed and implemented by a team from the Jet Propulsion Lab with support from the European Space Operations Center. This poster shows the requirements for the interface, the design, the topology, the testing and lessons learned from the whole implementation.

  17. BELIEF dashboard - a web-based curation interface to support generation of BEL networks

    OpenAIRE

    Madan, Sumit; Hodapp, Sven; Fluck, Juliane

    2015-01-01

    The relevance of network-based approaches in systems biology to achieve a better understanding of biological mechanisms has increased enormously. The Biological Expression Language (BEL) is well designed to collate findings from scientific literature into biological network models. To facilitate encoding and biocuration of such findings in BEL, a free and user-friendly web-based curation interface called BELIEF Dashboard has been developed. The interface incorporates an information extraction...

  18. Using NVMe Gen3 PCIe SSD Cards in High-density Servers for High-performance Big Data Transfer Over Multiple Network Channels

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Chin [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2015-02-07

    This Technical Note describes how the Zettar team came up with a data transfer cluster design that convincingly proved the feasibility of using high-density servers for high-performance Big Data transfers. It then outlines the tests, operations, and observations that address a potential over-heating concern regarding the use of Non-Volatile Memory Host Controller Interface Specification (NVMHCI aka NVM Express or NVMe) Gen 3 PCIe SSD cards in high-density servers. Finally, it points out the possibility of developing a new generation of high-performance Science DMZ data transfer system for the data-intensive research community and commercial enterprises.

  19. Service offerings and interfaces for the ACTS network of earth stations

    Science.gov (United States)

    Coney, T. A.; Dobyns, T. R.; Chitre, D. M.; Lindstrom, R.

    1988-01-01

    The NASA Advanced Communications Technology Satellite (ACTS) will use a network of about 20 earth stations to operate as a Mode 1 network. This network will support two ACTS program objectives: to verify the technical performance of ACTS Mode 1 operation in GEO and to demonstrate the types and quality of services that can be provided by an ACTS Mode 1 communications system. The terrestrial interface design is a critical element in assuring that these network earth stations will meet the objectives. In this paper, the applicable terrestrial interface design requirements, the resulting interface specifications, and the associated terrestrial input/output hardware are discussed. A functional block diagram of a network earth station is shown.

  20. End-System Network Interface Controller for 100 Gb/s Wide Area Networks: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Wen, Jesse [Acadia Optronics LLC, Rockville, MD (United States)

    2013-08-30

    In recent years, network bandwidth requirements have scaled multiple folds, pushing the need for the development of data exchange mechanisms at 100 Gb/s and beyond. High performance computing, climate modeling, large-scale storage, and collaborative scientific research are examples of applications that can greatly benefit by leveraging high bandwidth capabilities of the order of 100 Gb/s. Such requirements and advances in IEEE Ethernet standards, Optical Transport Unit4 (OTU4), and host-system interconnects demand a network infrastructure supporting throughput rates of the order of 100 Gb/s with a single wavelength. To address such a demand Acadia Optronics in collaboration with the University of New Mexico, proposed and developed a end-system Network Interface Controller (NIC) for the 100Gbps WANs. Acadia’s 100G NIC employs an FPGA based system with a high-performance processor interconnect (PCIe 3.0) and a high capacity optical transmission link (CXP) to provide data transmission at the rate of 100 Gbps.

  1. Analog-to-digital clinical data collection on networked workstations with graphic user interface.

    Science.gov (United States)

    Lunt, D

    1991-02-01

    An innovative respiratory examination system has been developed that combines physiological response measurement, real-time graphic displays, user-driven operating sequences, and networked file archiving and review into a scientific research and clinical diagnosis tool. This newly constructed computer network is being used to enhance the research center's ability to perform patient pulmonary function examinations. Respiratory data are simultaneously acquired and graphically presented during patient breathing maneuvers and rapidly transformed into graphic and numeric reports, suitable for statistical analysis or database access. The environment consists of the hardware (Macintosh computer, MacADIOS converters, analog amplifiers), the software (HyperCard v2.0, HyperTalk, XCMDs), and the network (AppleTalk, fileservers, printers) as building blocks for data acquisition, analysis, editing, and storage. System operation modules include: Calibration, Examination, Reports, On-line Help Library, Graphic/Data Editing, and Network Storage.

  2. A replica exchange transition interface sampling method with multiple interface sets for investigating networks of rare events

    Science.gov (United States)

    Swenson, David W. H.; Bolhuis, Peter G.

    2014-07-01

    The multiple state transition interface sampling (TIS) framework in principle allows the simulation of a large network of complex rare event transitions, but in practice suffers from convergence problems. To improve convergence, we combine multiple state TIS [J. Rogal and P. G. Bolhuis, J. Chem. Phys. 129, 224107 (2008)] with replica exchange TIS [T. S. van Erp, Phys. Rev. Lett. 98, 268301 (2007)]. In addition, we introduce multiple interface sets, which allow more than one order parameter to be defined for each state. We illustrate the methodology on a model system of multiple independent dimers, each with two states. For reaction networks with up to 64 microstates, we determine the kinetics in the microcanonical ensemble, and discuss the convergence properties of the sampling scheme. For this model, we find that the kinetics depend on the instantaneous composition of the system. We explain this dependence in terms of the system's potential and kinetic energy.

  3. Integration of the CAR Interface module for the RRS of Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Sang Hoon; Baang, Dane; Park, Gee Yong; Choi, Young San; Kim, Young Ki [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2011-10-15

    In a research reactor, a CAR(Control Absorber Rod) interface module which receives the control information from the RRS(Reactor Regulating System) control computer and transfer control signal to a step motor in a CAR has been composed of an interface card, an indexer card and a driver card. Due to such separated interface components, the additional interface for each component was inevitable. That is, a CAR interface was more complicated and its corresponding communication ports, drivers and signal cables were unnecessarily required. To simplify this stuff, the interface card and indexer card are integrated to one module and integrated communication network including a step motor driver card can be established through backplane network. The CAR interface module has not been redundant because power operation excluding a CAR by a failure in CAR could be available thanks to remained CARs. But, actually in spite of one CAR failure, operation with remained CARs normally is likely impossible to keep track of rapid dynamics. To solve this problem, the modular redundant structure is introduced herein and this method will let us anticipate the high reliability

  4. Integration of the CAR Interface module for the RRS of Research Reactor

    International Nuclear Information System (INIS)

    Bae, Sang Hoon; Baang, Dane; Park, Gee Yong; Choi, Young San; Kim, Young Ki

    2011-01-01

    In a research reactor, a CAR(Control Absorber Rod) interface module which receives the control information from the RRS(Reactor Regulating System) control computer and transfer control signal to a step motor in a CAR has been composed of an interface card, an indexer card and a driver card. Due to such separated interface components, the additional interface for each component was inevitable. That is, a CAR interface was more complicated and its corresponding communication ports, drivers and signal cables were unnecessarily required. To simplify this stuff, the interface card and indexer card are integrated to one module and integrated communication network including a step motor driver card can be established through backplane network. The CAR interface module has not been redundant because power operation excluding a CAR by a failure in CAR could be available thanks to remained CARs. But, actually in spite of one CAR failure, operation with remained CARs normally is likely impossible to keep track of rapid dynamics. To solve this problem, the modular redundant structure is introduced herein and this method will let us anticipate the high reliability

  5. A Cross-Layer Routing Design for Multi-Interface Wireless Mesh Networks

    Directory of Open Access Journals (Sweden)

    Tzu-Chieh Tsai

    2009-01-01

    Full Text Available In recent years, Wireless Mesh Networks (WMNs technologies have received significant attentions. WMNs not only accede to the advantages of ad hoc networks but also provide hierarchical multi-interface architecture. Transmission power control and routing path selections are critical issues in the past researches of multihop networks. Variable transmission power levels lead to different network connectivity and interference. Further, routing path selections among different radio interfaces will also produce different intra-/interflow interference. These features tightly affect the network performance. Most of the related works on the routing protocol design do not consider transmission power control and multi-interface environment simultaneously. In this paper, we proposed a cross-layer routing protocol called M2iRi2 which coordinates transmission power control and intra-/interflow interference considerations as routing metrics. Each radio interface calculates the potential tolerable-added transmission interference in the physical layer. When the route discovery starts, the M2iRi2 will adopt the appropriate power level to evaluate each interface quality along paths. The simulation results demonstrate that our design can enhance both network throughput and end-to-end delay.

  6. Web-Based Interface for Command and Control of Network Sensors

    Science.gov (United States)

    Wallick, Michael N.; Doubleday, Joshua R.; Shams, Khawaja S.

    2010-01-01

    This software allows for the visualization and control of a network of sensors through a Web browser interface. It is currently being deployed for a network of sensors monitoring Mt. Saint Helen s volcano; however, this innovation is generic enough that it can be deployed for any type of sensor Web. From this interface, the user is able to fully control and monitor the sensor Web. This includes, but is not limited to, sending "test" commands to individual sensors in the network, monitoring for real-world events, and reacting to those events

  7. A smart card based student card system

    OpenAIRE

    2009-01-01

    M.Sc. A Smart Card looks like a normal plastic card that we use every day, but its capabilities and advantages are huge. Inside the card there is a small microprocessor capable of doing operations on data. With memory available on the card, data can be stored in a safe and secure location. This card can be used for various applications and is a big improvement on all of its predecessors. These applications can be anything from SIM cards in a cell phone to credit cards and cards used for ac...

  8. Analysis of Transaction Authorization for Credit Card Master Card Holders

    OpenAIRE

    Alam Surawijaya; Elly Agustina. Skom, Elly Agustina. Skom

    1998-01-01

    The credit card is a kind of payment in lieu of cash has a bright prospect in the future,because with the risk of carrying cash large enough in terms of both security and theamount of cash required at certain moments.With so many banks are Mastercard credit card issuer, then Mastercard create acommunication network that is designed to serve all requests authorization from eachmember. Some of the benefits gained from the existence of this system are rapidlyincreasing the authorization process ...

  9. High-performance parallel interface to synchronous optical network gateway

    Science.gov (United States)

    St. John, Wallace B.; DuBois, David H.

    1998-08-11

    A digital system provides sending and receiving gateways for HIPPI interfaces. Electronic logic circuitry formats data signals and overhead signals in a data frame that is suitable for transmission over a connecting fiber optic link. Multiplexers route the data and overhead signals to a framer module. The framer module allocates the data and overhead signals to a plurality of 9-byte words that are arranged in a selected protocol. The formatted words are stored in a storage register for output through the gateway.

  10. OPNET simulation Signaling System No.7 (SS7) network interfaces

    OpenAIRE

    Ow, Kong Chung.

    2000-01-01

    This thesis presents an OPNET model and simulation of the Signaling System No.7 (SS7) network, which is dubbed the world's largest data communications network. The main focus of the study is to model one of its levels, the Message Transfer Part Level 3, in accordance with the ITU.T recommendation Q.704. An overview of SS7 that includes the evolution and basics of SS7 architecture is provided to familarize the reader with the topic. This includes the protocol stack, signaling points, signaling...

  11. Integration of multi-interface conversion channel using FPGA for modular photonic network

    Science.gov (United States)

    Janicki, Tomasz; Pozniak, Krzysztof T.; Romaniuk, Ryszard S.

    2010-09-01

    The article discusses the integration of different types of interfaces with FPGA circuits using a reconfigurable communication platform. The solution has been implemented in practice in a single node of a distributed measurement system. Construction of communication platform has been presented with its selected hardware modules, described in VHDL and implemented in FPGA circuits. The graphical user interface (GUI) has been described that allows a user to control the operation of the system. In the final part of the article selected practical solutions have been introduced. The whole measurement system resides on multi-gigabit optical network. The optical network construction is highly modular, reconfigurable and scalable.

  12. Federated Ground Station Network Model and Interface Specification

    Science.gov (United States)

    2014-12-01

    of-sight of a small portion of the ground at any moment due to the geometry of a satellite in LEO above a planet of Earth’s size. The portion of the...Subnetwork 3 started out as a lone network in which there was a single CA and a number of ground stations. Then Subnetwork 3 joined with SA 1 and its

  13. Towards an open sound card

    DEFF Research Database (Denmark)

    Dimitrov, Smilen; Serafin, Stefania

    2011-01-01

    The architecture of a sound card can, in simple terms, be described as an electronic board containing a digital bus interface hardware, and analog-to-digital (A/D) and digital-to-analog (D/A) converters; then, a soundcard driver software on a personal computer's (PC) operating system (OS) can con...

  14. OMNI: An optoelectronic multichannel network interface based on hybrid CMOS-SEED technology

    Science.gov (United States)

    Pinkston, Timothy M.

    1996-11-01

    This paper presents a hybrid CMOS-SEED multiprocessor network interface smart pixel design that implements a reservation-based channel control protocol for collisionless concurrent access to multiple optical interprocessor communication channels. An asynchronous optical token is used as the arbitration mechanism for reservation control instead of slotted access. This work demonstrates that complex network protocol functions can be implemented using optoelectronic smart pixel technology.

  15. Field Trial of 40 Gb/s Optical Transport Network using Open WDM Interfaces

    DEFF Research Database (Denmark)

    Fagertun, Anna Manolova; Ruepp, Sarah Renée; Petersen, Martin Nordal

    2013-01-01

    An experimental field-trail deployment of a 40Gb/s open WDM interface in an operational network is presented, in cross-carrier interconnection scenario. Practical challenges of integration and performance measures for both native and alien channels are outlined....

  16. Inversion of Density Interfaces Using the Pseudo-Backpropagation Neural Network Method

    Science.gov (United States)

    Chen, Xiaohong; Du, Yukun; Liu, Zhan; Zhao, Wenju; Chen, Xiaocheng

    2018-05-01

    This paper presents a new pseudo-backpropagation (BP) neural network method that can invert multi-density interfaces at one time. The new method is based on the conventional forward modeling and inverse modeling theories in addition to conventional pseudo-BP neural network arithmetic. A 3D inversion model for gravity anomalies of multi-density interfaces using the pseudo-BP neural network method is constructed after analyzing the structure and function of the artificial neural network. The corresponding iterative inverse formula of the space field is presented at the same time. Based on trials of gravity anomalies and density noise, the influence of the two kinds of noise on the inverse result is discussed and the scale of noise requested for the stability of the arithmetic is analyzed. The effects of the initial model on the reduction of the ambiguity of the result and improvement of the precision of inversion are discussed. The correctness and validity of the method were verified by the 3D model of the three interfaces. 3D inversion was performed on the observed gravity anomaly data of the Okinawa trough using the program presented herein. The Tertiary basement and Moho depth were obtained from the inversion results, which also testify the adaptability of the method. This study has made a useful attempt for the inversion of gravity density interfaces.

  17. U-Net/SLE: A Java-Based User-Customizable Virtual Network Interface

    Directory of Open Access Journals (Sweden)

    Matt Welsh

    1999-01-01

    Full Text Available We describe U‐Net/SLE (Safe Language Extensions, a user‐level network interface architecture which enables per‐application customization of communication semantics through downloading of user extension applets, implemented as Java classfiles, to the network interface. This architecture permits applications to safely specify code to be executed within the NI on message transmission and reception. By leveraging the existing U‐Net model, applications may implement protocol code at the user level, within the NI, or using some combination of the two. Our current implementation, using the Myricom Myrinet interface and a small Java Virtual Machine subset, allows host communication overhead to be reduced and improves the overlap of communication and computation during protocol processing.

  18. Prediction of interface residue based on the features of residue interaction network.

    Science.gov (United States)

    Jiao, Xiong; Ranganathan, Shoba

    2017-11-07

    Protein-protein interaction plays a crucial role in the cellular biological processes. Interface prediction can improve our understanding of the molecular mechanisms of the related processes and functions. In this work, we propose a classification method to recognize the interface residue based on the features of a weighted residue interaction network. The random forest algorithm is used for the prediction and 16 network parameters and the B-factor are acting as the element of the input feature vector. Compared with other similar work, the method is feasible and effective. The relative importance of these features also be analyzed to identify the key feature for the prediction. Some biological meaning of the important feature is explained. The results of this work can be used for the related work about the structure-function relationship analysis via a residue interaction network model. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. WWW + smart card: towards a mobile health care management system.

    Science.gov (United States)

    Chan, A T

    2000-07-01

    This paper highlights the benefits of combining the World Wide Web and smart card technologies to support a highly mobile health management framework. In particular, we describe an approach using the SmartCard-Web Gateway Interface (SGI) as a common interface to communicate and access the medical records residing in a smart card. Importantly, by employing HTTP as the baseline protocol to access information on the smart card, SGI promotes the use of de facto standard web browsers as the common client user interface. The initial implementation of the framework has demonstrated the feasibility of the concept in facilitating a truly mobile access of patient's medical records based on SGI.

  20. International images: business cards.

    Science.gov (United States)

    Gaston, S; Pucci, J

    1991-01-01

    Nursing specialists engage in a variety of international professional activities. Business cards are an important aspect of establishing a professional image. This article presents recommended business card contents, international etiquette, card design and production, and cared innovations.

  1. Lambdastation: a forwarding and admission control service to interface production network facilities with advanced research network paths

    Energy Technology Data Exchange (ETDEWEB)

    DeMar, Philip; Petravick, Don; /Fermilab

    2004-12-01

    Over the past several years, there has been a great deal of research effort and funding put into the deployment of optical-based, advanced technology wide-area networks. Fermilab and CalTech have initiated a project to enable our production network facilities to exploit these advanced research network facilities. Our objective is to forward designated data transfers across these advanced wide area networks on a per-flow basis, making use our capacious production-use storage systems connected to the local campus network. To accomplish this, we intend to develop a dynamically provisioned forwarding service that would provide alternate path forwarding onto available wide area advanced research networks. The service would dynamically reconfigure forwarding of specific flows within our local production-use network facilities, as well as provide an interface to enable applications to utilize the service. We call this service LambdaStation. If one envisions wide area optical network paths as high bandwidth data railways, then LambdaStation would functionally be the railroad terminal that regulates which flows at the local site get directed onto the high bandwidth data railways. LambdaStation is a DOE-funded SciDac research project in its very early stage of development.

  2. Network and user interface for PAT DOME virtual motion environment system

    Science.gov (United States)

    Worthington, J. W.; Duncan, K. M.; Crosier, W. G.

    1993-01-01

    The Device for Orientation and Motion Environments Preflight Adaptation Trainer (DOME PAT) provides astronauts a virtual microgravity sensory environment designed to help alleviate tye symptoms of space motion sickness (SMS). The system consists of four microcomputers networked to provide real time control, and an image generator (IG) driving a wide angle video display inside a dome structure. The spherical display demands distortion correction. The system is currently being modified with a new graphical user interface (GUI) and a new Silicon Graphics IG. This paper will concentrate on the new GUI and the networking scheme. The new GUI eliminates proprietary graphics hardware and software, and instead makes use of standard and low cost PC video (CGA) and off the shelf software (Microsoft's Quick C). Mouse selection for user input is supported. The new Silicon Graphics IG requires an Ethernet interface. The microcomputer known as the Real Time Controller (RTC), which has overall control of the system and is written in Ada, was modified to use the free public domain NCSA Telnet software for Ethernet communications with the Silicon Graphics IG. The RTC also maintains the original ARCNET communications through Novell Netware IPX with the rest of the system. The Telnet TCP/IP protocol was first used for real-time communication, but because of buffering problems the Telnet datagram (UDP) protocol needed to be implemented. Since the Telnet modules are written in C, the Adap pragma 'Interface' was used to interface with the network calls.

  3. Network Performance Evaluation of Abis Interface over DVB-S2 in the GSM over Satellite Network

    Directory of Open Access Journals (Sweden)

    S. B. Musabekov

    2010-01-01

    Full Text Available This paper deals with establishing a GSM link over Satellite. Abis interface, which is defined between Base Transceiver Station (BTS and Base Station Controller (BSC, in a GSM network is considered here to be routed over the Satellite. The satellite link enables a quick and cost-effective GSM link in meagerly populated areas. A different scenario comparison was done to understand the impact of Satellite environment on network availability comparing to terrestrial scenario. We have implemented an Abis interface over DVB S2 in NS2 and evaluated the performance over the high delay and loss satellite channel. Network performance was evaluated with respect to Satellite channel delay and DVB S2 encapsulation efficiency under different amount of user traffic and compared with the terrestrial scenario. The results clearly showed an increased amount of SDCCH and TCH channels required in the case of satellite scenario for the same amount of traffic in comparison to conventional terrestrial scenario. We have optimized the parameters based on the simulation results. Link budget estimation considering DVB-S2 platform was done to find satellite bandwidth and cost requirements for different network setups.

  4. Interfacing a General Purpose Fluid Network Flow Program with the SINDA/G Thermal Analysis Program

    Science.gov (United States)

    Schallhorn, Paul; Popok, Daniel

    1999-01-01

    A general purpose, one dimensional fluid flow code is currently being interfaced with the thermal analysis program Systems Improved Numerical Differencing Analyzer/Gaski (SINDA/G). The flow code, Generalized Fluid System Simulation Program (GFSSP), is capable of analyzing steady state and transient flow in a complex network. The flow code is capable of modeling several physical phenomena including compressibility effects, phase changes, body forces (such as gravity and centrifugal) and mixture thermodynamics for multiple species. The addition of GFSSP to SINDA/G provides a significant improvement in convective heat transfer modeling for SINDA/G. The interface development is conducted in multiple phases. This paper describes the first phase of the interface which allows for steady and quasi-steady (unsteady solid, steady fluid) conjugate heat transfer modeling.

  5. Data flow methods for dynamic system simulation - A CSSL-IV microcomputer network interface

    Science.gov (United States)

    Makoui, A.; Karplus, W. J.

    1983-01-01

    A major problem in employing networks of microcomputers for the real-time simulation of complex systems is to allocate computational tasks to the various microcomputers in such a way that idle time and time lost in interprocess communication is minimized. The research reported in this paper is directed to the development of a software interface between a higher-level simulation language and a network of microcomputers. A CSSL-IV source program is translated to a data flow graph. This graph is then analyzed automatically so as to allocate computing tasks to the various processors.

  6. Application of smart cards in physical and information security systems

    International Nuclear Information System (INIS)

    Dreifus, H.N.

    1988-01-01

    Smart Cards, integrated circuits embedded into credit cards, have been proposed for many computer and physical security applications. The cards have shown promise in improving both the security and monitoring of systems ranging from computer network identification through physical protection and access control. With the increasing computational power embedded within these cards, advanced encryption techniques such as public key cryptography can now be realized, enabling more sophisticated uses

  7. Credit Card Security

    OpenAIRE

    G.C., Anup

    2013-01-01

    Author: Anup G.C. Year: 2013 Subject of thesis: Credit Card Security Number of pages: 36+2 Credit Card is a widely used electronic chip for easy transactions. The main purpose of the report was to show the security measures of transaction by credit cards. The purpose was to give information about credit cards and how they were introduced. The thesis reportcontained the types of card theft with examples and sited the various protocols used for online ...

  8. PC add on card for processing of LSC signals

    International Nuclear Information System (INIS)

    Jadhav, S.R.; Nikhare, D.M.; Gurna, R.K.; Paulson, Molly; Kulkarni, C.P.; Vaidya, P.P.

    2001-01-01

    This paper describes PC- add on card developed at Electronics Division for processing of LSC signals. This card uses highly integrated digital and analog circuits, for entire processing of signals available from preamplifiers to get complete beta energy spectrum corresponding to coincident events in Liquid Scintillation Counting. LSC card along with High Voltage PC-add on card gives complete electronics required for LSC system. This card is also used in automatic LSC system along with interface circuits, which are used to control mechanical movements. (author)

  9. FPGA implementation of a ZigBee wireless network control interface to transmit biomedical signals

    Science.gov (United States)

    Gómez López, M. A.; Goy, C. B.; Bolognini, P. C.; Herrera, M. C.

    2011-12-01

    In recent years, cardiac hemodynamic monitors have incorporated new technologies based on wireless sensor networks which can implement different types of communication protocols. More precisely, a digital conductance catheter system recently developed adds a wireless ZigBee module (IEEE 802.15.4 standards) to transmit cardiac signals (ECG, intraventricular pressure and volume) which would allow the physicians to evaluate the patient's cardiac status in a noninvasively way. The aim of this paper is to describe a control interface, implemented in a FPGA device, to manage a ZigBee wireless network. ZigBee technology is used due to its excellent performance including simplicity, low-power consumption, short-range transmission and low cost. FPGA internal memory stores 8-bit signals with which the control interface prepares the information packets. These data were send to the ZigBee END DEVICE module that receives and transmits wirelessly to the external COORDINATOR module. Using an USB port, the COORDINATOR sends the signals to a personal computer for displaying. Each functional block of control interface was assessed by means of temporal diagrams. Three biological signals, organized in packets and converted to RS232 serial protocol, were sucessfully transmitted and displayed in a PC screen. For this purpose, a custom-made graphical software was designed using LabView.

  10. FPGA implementation of a ZigBee wireless network control interface to transmit biomedical signals

    International Nuclear Information System (INIS)

    López, M A Gómez; Goy, C B; Bolognini, P C; Herrera, M C

    2011-01-01

    In recent years, cardiac hemodynamic monitors have incorporated new technologies based on wireless sensor networks which can implement different types of communication protocols. More precisely, a digital conductance catheter system recently developed adds a wireless ZigBee module (IEEE 802.15.4 standards) to transmit cardiac signals (ECG, intraventricular pressure and volume) which would allow the physicians to evaluate the patient's cardiac status in a noninvasively way. The aim of this paper is to describe a control interface, implemented in a FPGA device, to manage a ZigBee wireless network. ZigBee technology is used due to its excellent performance including simplicity, low-power consumption, short-range transmission and low cost. FPGA internal memory stores 8-bit signals with which the control interface prepares the information packets. These data were send to the ZigBee END DEVICE module that receives and transmits wirelessly to the external COORDINATOR module. Using an USB port, the COORDINATOR sends the signals to a personal computer for displaying. Each functional block of control interface was assessed by means of temporal diagrams. Three biological signals, organized in packets and converted to RS232 serial protocol, were successfully transmitted and displayed in a PC screen. For this purpose, a custom-made graphical software was designed using LabView.

  11. Double network bacterial cellulose hydrogel to build a biology-device interface

    Science.gov (United States)

    Shi, Zhijun; Li, Ying; Chen, Xiuli; Han, Hongwei; Yang, Guang

    2013-12-01

    Establishing a biology-device interface might enable the interaction between microelectronics and biotechnology. In this study, electroactive hydrogels have been produced using bacterial cellulose (BC) and conducting polymer (CP) deposited on the BC hydrogel surface to cover the BC fibers. The structures of these composites thus have double networks, one of which is a layer of electroactive hydrogels combined with BC and CP. The electroconductivity provides the composites with capabilities for voltage and current response, and the BC hydrogel layer provides good biocompatibility, biodegradability, bioadhesion and mass transport properties. Such a system might allow selective biological functions such as molecular recognition and specific catalysis and also for probing the detailed genetic and molecular mechanisms of life. A BC-CP composite hydrogel could then lead to a biology-device interface. Cyclic voltammetry and electrochemical impedance spectroscopy (EIS) are used here to study the composite hydrogels' electroactive property. BC-PAni and BC-PPy respond to voltage changes. This provides a mechanism to amplify electrochemical signals for analysis or detection. BC hydrogels were found to be able to support the growth, spreading and migration of human normal skin fibroblasts without causing any cytotoxic effect on the cells in the cell culture. These double network BC-CP hydrogels are biphasic Janus hydrogels which integrate electroactivity with biocompatibility, and might provide a biology-device interface to produce implantable devices for personalized and regenerative medicine.

  12. Research on e-commerce transaction networks using multi-agent modelling and open application programming interface

    Science.gov (United States)

    Piao, Chunhui; Han, Xufang; Wu, Harris

    2010-08-01

    We provide a formal definition of an e-commerce transaction network. Agent-based modelling is used to simulate e-commerce transaction networks. For real-world analysis, we studied the open application programming interfaces (APIs) from eBay and Taobao e-commerce websites and captured real transaction data. Pajek is used to visualise the agent relationships in the transaction network. We derived one-mode networks from the transaction network and analysed them using degree and betweenness centrality. Integrating multi-agent modelling, open APIs and social network analysis, we propose a new way to study large-scale e-commerce systems.

  13. A sensor network to iPhone interface separating continuous and sporadic processes in mobile telemedicine.

    Science.gov (United States)

    D'Angelo, Lorenzo T; Schneider, Michael; Neugebauer, Paul; Lueth, Tim C

    2011-01-01

    In this contribution, a new concept for interfacing sensor network nodes (motes) and smartphones is presented for the first time. In the last years, a variety of telemedicine applications on smartphones for data reception, display and transmission have been developed. However, it is not always practical or possible to have a smartphone application running continuously to accomplish these tasks. The presented system allows receiving and storing data continuously using a mote and visualizing or sending it on the go using the smartphone as user interface only when desired. Thus, the processes of data reception and storage run on a safe system consuming less energy and the smartphone's potential along with its battery are not demanded continuously. Both, system concept and realization with an Apple iPhone are presented.

  14. FRENCH PROTOCOL CARDS

    CERN Multimedia

    Division du Personnel

    1999-01-01

    Senior officials, holders of FRENCH PROTOCOL cards (blue cards) due to expire on 31.12.1999, are requested to return these cards and those of family members, for extension to:Bureau des cartes, bâtiment 33.1-025Should the 3 spaces for authentication on the back of the card be full, please enclose 2 passport photographs for a new card.In the case of children aged 14 and over, an attestation of dependency and a school certificate should be returned with the card.Personnel DivisionTel. 79494/74683

  15. FRENCH PROTOCOL CARDS

    CERN Multimedia

    Human Resources Division

    2000-01-01

    Senior officials, holders of FRENCH PROTOCOL cards (blue cards) due to expire on 31.12.2000, are requested to return these cards and those of family members, for extension to: Bureau des cartes, Bât 33.1-009/1-015 Should the three spaces for authentication on the back of the card be full, please enclose two passport photographs for a new card. In the case of children aged 14 and over, an attestation of dependency and a school certificate should be returned with the card.

  16. An Interfacing System for Radiation Surveillance Using a Radio Communication Network

    International Nuclear Information System (INIS)

    Arunsiri, T.; Punnachaiya, S.; Pattarasumun, A.

    1998-01-01

    The development of an interfacing system for environmental radiation surveillance using radio communication network is aimed to improve a way by which environmental radiation measurement is transmitted and reported from the regional area monitoring station network. This also includes an automatic warning of beacon status via the radio link network to the center of environmental radiation control when an abnormal radiation level is detected. The interfacing system was developed by simulating the EGAT radio link network, the NT 2612, and can be separated into two parts. The first part was for a mobile station which can manage the output data from the radiation measurement system in the standard form of RS-232, IEEE-488, BCD and analog signal. This was accomplished by modulating the signal in selected baud rates ranging from 150 to 9600 bps using an economical radio packet capable of identifying and recalling the station code number. The other part is the linking system between the output data and the microcomputer equipped with a software to manage and evaluate the data from 10 surveillance stations for convenient handing of data output, statistical analysis and transmitting warning signal. Data transmission was tested using a baud rate of 1200 bps and was found to contain no detectable error when digital signal was transmitted while analog signal transmission resulted in deviations of less than ± 0.003%. The development of this radio link system provides a future trend for the environmental radiation monitoring network for countries with nuclear power plants or neighboring countries needed to continuously monitor for any abnormal radiation level in the environment. In case that the radiation surveillance system detects a high level of radiation, a warning signal will be transmitted and appropriate actions may be immediately exercised to control impacts of radiation on environment and living things according to international guidelines

  17. Print a Bed Bug Card - (Single Cards)

    Science.gov (United States)

    Two sets of business-card-sized lists of tips for recognizing bed bugs and the signs of an infestation, including a photo of bed bugs to assist identification. One card is for general use around home or office, the other for travelers.

  18. Artificial brains. A million spiking-neuron integrated circuit with a scalable communication network and interface.

    Science.gov (United States)

    Merolla, Paul A; Arthur, John V; Alvarez-Icaza, Rodrigo; Cassidy, Andrew S; Sawada, Jun; Akopyan, Filipp; Jackson, Bryan L; Imam, Nabil; Guo, Chen; Nakamura, Yutaka; Brezzo, Bernard; Vo, Ivan; Esser, Steven K; Appuswamy, Rathinakumar; Taba, Brian; Amir, Arnon; Flickner, Myron D; Risk, William P; Manohar, Rajit; Modha, Dharmendra S

    2014-08-08

    Inspired by the brain's structure, we have developed an efficient, scalable, and flexible non-von Neumann architecture that leverages contemporary silicon technology. To demonstrate, we built a 5.4-billion-transistor chip with 4096 neurosynaptic cores interconnected via an intrachip network that integrates 1 million programmable spiking neurons and 256 million configurable synapses. Chips can be tiled in two dimensions via an interchip communication interface, seamlessly scaling the architecture to a cortexlike sheet of arbitrary size. The architecture is well suited to many applications that use complex neural networks in real time, for example, multiobject detection and classification. With 400-pixel-by-240-pixel video input at 30 frames per second, the chip consumes 63 milliwatts. Copyright © 2014, American Association for the Advancement of Science.

  19. CMS Wallet Card

    Data.gov (United States)

    U.S. Department of Health & Human Services — The CMS Wallet Card is a quick reference statistical summary on annual CMS program and financial data. The CMS Wallet Card is available for each year from 2004...

  20. The design and development of a multilayer RF circuit card

    OpenAIRE

    Ferro, John Francis

    1991-01-01

    The goal of this project was to design an airborne radio frequency circuit card that was very light weight, occupied a small volume, and operated from 20 Mhz to 1500 Mhz. The circuit card being reported on is called an RF multicoupler, and is one of two cards used in a radio frequency distribution unit (RFD). This unit interfaces a large number of receivers to various antennas. In the past this type of circuitry was done by cascading discrete connectorized RF compo...

  1. BHI Purchase Card System user's guide

    International Nuclear Information System (INIS)

    Mehden, P. von der.

    1996-04-01

    The purpose of the purchase card system (P-Card System) is to apply enhanced acquisition tools for increased return on ERC internal resources, and to reduce the cost of off-the-shelf commercial items through the use of credit cards by authorized personnel. The P-Card may be used to make transactions either over the counter, by mail, or via telephone. For Project employees, the P-Card provides and easier, direct method of acquisition that requires less process time than requisitioning. The P-C eliminates the involvement of the procurement organization in low value-added acquisitions and low-risk transactions. Controller reduces the expenditure of resources in the support of low dollar value products and services acquisition. The P- Card System has been initiated in agreement with American Express Travel Related Services, Inc.; the credit card is and American Express Corporate Purchasing Card. The integrated network application for cardholder reconciliation and reallocation of costs was originally government furnished software developed by the U.S. DOE. Currently, the software application (version 3.0 and beyond) is copyrighted by a Bechtel Hanford, Inc. subcontractor

  2. Unraveling a Card Trick

    Science.gov (United States)

    Hoare, Tony; Shankar, Natarajan

    In one version of Gilbreath's card trick, a deck of cards is arranged as a series of quartets, where each quartet contains a card from each suit and all the quartets feature the same ordering of the suits. For example, the deck could be a repeating sequence of spades, hearts, clubs, and diamonds, in that order, as in the deck below.

  3. A user interface on networked workstations for MFTF-B plasma diagnostic instruments

    International Nuclear Information System (INIS)

    Balch, T.R.; Renbarger, V.L.

    1986-01-01

    A network of Sun-2/170 workstations is used to provide an interface to the MFTF-B Plasma Diagnostics System at Lawrence Livermore National Laboratory. The Plasma Diagnostics System (PDS) is responsible for control of MFTF-B plasma diagnostic instrumentation. An EtherNet Local Area Network links the workstations to a central multiprocessing system which furnishes data processing, data storage and control services for PDS. These workstations permit a physicist to command data acquisition, data processing, instrument control, and display of results. The interface is implemented as a metaphorical desktop, which helps the operator form a mental model of how the system works. As on a real desktop, functions are provided by sheets of paper (windows on a CRT screen) called worksheets. The worksheets may be invoked by pop-up menus and may be manipulated with a mouse. These worksheets are actually tasks that communicate with other tasks running in the central computer system. By making entries in the appropriate worksheet, a physicist may specify data acquisition or processing, control a diagnostic, or view a result

  4. EuCARD final project report

    CERN Document Server

    Koutchouk, J P

    2014-01-01

    After four years of activity, EuCARD has most of its objectives fulfilled, with some new objectives added and a few others on excellent tracks while requiring additional time. The management has been active in reinforcing the collaborative links between partners and projects, contributing to the preparation of FP7-EuCARD2, initiating FP7-HiLumi-LHC Design Study, to favour sustained collaborations beyond EuCARD. An out-of-contract network has been successfully launched on laser plasma acceleration, to combine forces between accelerator, laser and plasma communities. Communication and dissemination activities have led to two highlights: Accelerating News, an accelerator R&D newsletter initiated by EuCARD and now common to all FP7 accelerator projects (over 1000 subscribers) and a series of monographs on accelerator sciences that is progressively finding its public. The scientific networks have more than fulfilled their initial objectives: roadmaps are defined for neutrino facilities, submitted to the Europe...

  5. Review of sound card photogates

    International Nuclear Information System (INIS)

    Gingl, Zoltan; Mingesz, Robert; Mellar, Janos; Makra, Peter

    2011-01-01

    Photogates are probably the most commonly used electronic instruments to aid experiments in the field of mechanics. Although they are offered by many manufacturers, they can be too expensive to be widely used in all classrooms, in multiple experiments or even at home experimentation. Today all computers have a sound card - an interface for analogue signals. It is possible to make very simple yet highly accurate photogates for cents, while much more sophisticated solutions are also available at a still very low cost. In our paper we show several experimentally tested ways of implementing sound card photogates in detail, and we also provide full-featured, free, open-source photogate software as a much more efficient experimentation tool than the usually used sound recording programs. Further information is provided on a dedicated web page, www.noise.physx.u-szeged.hu/edudev.

  6. Computer Data Punch Cards

    CERN Multimedia

    Those card are printed with minimal layout aids for the formatting of FORTRAN programs, plus extra guidelines every ten columns suggesting a generic tabular data layout. A punch card is a piece of stiff paper that can be used to contain digital information represented by the presence or absence of holes in predefined positions. Punched cards were used for specialized unit record machines, organized into semiautomatic data processing systems, used punched cards for data input, output, and storage. Furthermore many new digital computers started to used punched cards.

  7. Laminated dosimetric card

    International Nuclear Information System (INIS)

    Cox, F.M.; Chamberlain, J.D.; Shrader, E.F.; Shoffner, B.M.; Szalanczy, A.

    1975-01-01

    A laminated card with one or more apertures, each adapted to peripherally seal an encapsulated dosimeter, is formed by bonding a foraminous, code-adaptable, rigid sheet of low-Z material with a codedly transparent sheet of low-Z material in light-transmitting registry with particular code-holes of the rigid sheet. The laminated card may be coded to identify the person carrying it, and/or the location or circumstances related to its exposure to radiation. This card is particularly adapted for use in an instrument capable of evaluating a multiplicity of cards, substantially continuously. The coded identification from the card may be displayed by an appropriate machine, and if desired an evaluation may be recorded because of a ''parity checking'' system incorporated in each card, which permits ''auto-correction.'' Alternatively, where means for effecting the correction automatically are available, the operation of the machine may be interrupted to permit visual examination of a rejected card. The card of this invention is also coded for identifying the type of card with respect to its specific function, and whether or not a card is correctly positioned at any predetermined location during its sequential progress through the instrument in which it is evaluated. Dosimeters are evaluated and the card identified in one pass through the instrument. (auth)

  8. Meteorological Support Interface Control Working Group (MSICWG) Instrumentation, Data Format, and Networks Document

    Science.gov (United States)

    Brenton, James; Roberts, Barry C.

    2017-01-01

    The purpose of this document is to provide an overview of instrumentation discussed at the Meteorological Interface Control Working Group (MSICWG), a reference for data formats currently used by members of the group, a summary of proposed formats for future use by the group, an overview of the data networks of the group's members. This document will be updated as new systems are introduced, old systems are retired, and when the MSICWG community necessitates a change to the formats. The MSICWG consists of personnel from the National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC), NASA Marshall Space Flight Center (MSFC), NASA Johnson Space Center (JSC), National Oceanic and Atmospheric Administration National Weather Service Spaceflight Meteorology Group (SMG), and the United States Air Force (USAF) 45th Space Wing and Weather Squadron. The purpose of the group is to coordinate the distribution of weather related data to support NASA space launch related activities.

  9. Design and Synthesis of Network-Forming Triblock Copolymers Using Tapered Block Interfaces

    Science.gov (United States)

    Kuan, Wei-Fan; Roy, Raghunath; Rong, Lixia; Hsiao, Benjamin S.; Epps, Thomas H.

    2012-01-01

    We report a strategy for generating novel dual-tapered poly(isoprene-b-isoprene/styrene-b-styrene-b-styrene/methyl methacrylate-b-methyl methacrylate) [P(I-IS-S-SM-M)] triblock copolymers that combines anionic polymerization, atom transfer radical polymerization (ATRP), and Huisgen 1,3-dipolar cycloaddition click chemistry. The tapered interfaces between blocks were synthesized via a semi-batch feed using programmable syringe pumps. This strategy allows us to manipulate the transition region between copolymer blocks in triblock copolymers providing control over the interfacial interactions in our nanoscale phase-separated materials independent of molecular weight and block constituents. Additionally, we show the ability to retain a desirous and complex multiply-continuous network structure (alternating gyroid) in our dual-tapered triblock material. PMID:23066522

  10. A Wireless Biomedical Signal Interface System-on-Chip for Body Sensor Networks.

    Science.gov (United States)

    Lei Wang; Guang-Zhong Yang; Jin Huang; Jinyong Zhang; Li Yu; Zedong Nie; Cumming, D R S

    2010-04-01

    Recent years have seen the rapid development of biosensor technology, system-on-chip design, wireless technology. and ubiquitous computing. When assembled into an autonomous body sensor network (BSN), the technologies become powerful tools in well-being monitoring, medical diagnostics, and personal connectivity. In this paper, we describe the first demonstration of a fully customized mixed-signal silicon chip that has most of the attributes required for use in a wearable or implantable BSN. Our intellectual-property blocks include low-power analog sensor interface for temperature and pH, a data multiplexing and conversion module, a digital platform based around an 8-b microcontroller, data encoding for spread-spectrum wireless transmission, and a RF section requiring very few off-chip components. The chip has been fully evaluated and tested by connection to external sensors, and it satisfied typical system requirements.

  11. Networks and knowledge at the interface Governing the coast of East Kalimantan

    Directory of Open Access Journals (Sweden)

    Rini Kusumawati

    2016-05-01

    Full Text Available The thesis explores the actual processes of interaction between global and local actors regarding marine conservation and aquaculture development. The objective of the thesis is to analyse the collaboration, friction, and the cultural-historical, social, political, and economic contestations of the value and meaning of conservation from the perspectives of the district governmental agencies, the district head, local entrepreneurs and industry, and the international NGO. Concentrating on the dynamics of this global-local interface this thesis adds to existing literature because it helps us to understand why global environmental networks often face contention and even fail to be effective in their attempts to implement regulations or standards for a more sustainable production of coastal resources. The data were gathered during long-term anthropological fieldwork combining a political-ecology approach with environmental anthropology.

  12. Quantum neural network-based EEG filtering for a brain-computer interface.

    Science.gov (United States)

    Gandhi, Vaibhav; Prasad, Girijesh; Coyle, Damien; Behera, Laxmidhar; McGinnity, Thomas Martin

    2014-02-01

    A novel neural information processing architecture inspired by quantum mechanics and incorporating the well-known Schrodinger wave equation is proposed in this paper. The proposed architecture referred to as recurrent quantum neural network (RQNN) can characterize a nonstationary stochastic signal as time-varying wave packets. A robust unsupervised learning algorithm enables the RQNN to effectively capture the statistical behavior of the input signal and facilitates the estimation of signal embedded in noise with unknown characteristics. The results from a number of benchmark tests show that simple signals such as dc, staircase dc, and sinusoidal signals embedded within high noise can be accurately filtered and particle swarm optimization can be employed to select model parameters. The RQNN filtering procedure is applied in a two-class motor imagery-based brain-computer interface where the objective was to filter electroencephalogram (EEG) signals before feature extraction and classification to increase signal separability. A two-step inner-outer fivefold cross-validation approach is utilized to select the algorithm parameters subject-specifically for nine subjects. It is shown that the subject-specific RQNN EEG filtering significantly improves brain-computer interface performance compared to using only the raw EEG or Savitzky-Golay filtered EEG across multiple sessions.

  13. CERN access cards

    CERN Multimedia

    HR Department

    2007-01-01

    Holders of CERN access cards are reminded that the card is an official document. It is important to carry it with you at all times when you are on the site. This applies also to those on standby duty who are called out for emergency interventions. As announced in Weekly Bulletin 13/2006, any loss or theft of access cards must be declared to the competent external authorities.

  14. Markets: Gift Cards

    OpenAIRE

    Jennifer Pate Offenberg

    2007-01-01

    The Mobil Oil Company introduced the first retail gift card that recorded value on a magnetic strip in 1995. In under a decade, such gift cards replaced apparel as the number one item sold during the Christmas season. This study will discuss the reasons for the strong surge in the gift card market. It will then consider the value of gift cards as an intermediate option between two alternatives: purchasing a physical gift, which could possibly be returned or exchanged, versus giving cash. Empi...

  15. Using the Electrocorticographic Speech Network to Control a Brain-Computer Interface in Humans

    Science.gov (United States)

    Leuthardt, Eric C.; Gaona, Charles; Sharma, Mohit; Szrama, Nicholas; Roland, Jarod; Freudenberg, Zac; Solis, Jamie; Breshears, Jonathan; Schalk, Gerwin

    2013-01-01

    Electrocorticography (ECoG) has emerged as a new signal platform for brain-computer interface (BCI) systems. Classically, the cortical physiology that has been commonly investigated and utilized for device control in humans has been brain signals from sensorimotor cortex. Hence, it was unknown whether other neurophysiological substrates, such as the speech network, could be used to further improve on or complement existing motor-based control paradigms. We demonstrate here for the first time that ECoG signals associated with different overt and imagined phoneme articulation can enable invasively monitored human patients to control a one-dimensional computer cursor rapidly and accurately. This phonetic content was distinguishable within higher gamma frequency oscillations and enabled users to achieve final target accuracies between 68 and 91% within 15 minutes. Additionally, one of the patients achieved robust control using recordings from a microarray consisting of 1 mm spaced microwires. These findings suggest that the cortical network associated with speech could provide an additional cognitive and physiologic substrate for BCI operation and that these signals can be acquired from a cortical array that is small and minimally invasive. PMID:21471638

  16. Implementation and Evaluation of Multichannel Multi-Interface Routing Mechanism with QoS-Consideration for Ad-Hoc Networks

    Directory of Open Access Journals (Sweden)

    Satoh Hiroki

    2010-01-01

    Full Text Available To accommodate real-time multimedia application while satisfying application-level QoS requirements in a wireless ad-hoc network, we need QoS control mechanisms. We proposed a new routing mechanism for a wireless ad-hoc network composed of nodes equipped with multiple network interfaces. By embedding information about channel usage in control messages of OLSRv2, each node obtains a view of topology and bandwidth information of the whole network. Based on the obtained information, a source node determines a logical path with the maximum available bandwidth to satisfy application-level QoS requirements. In this paper, we evaluated feasibility of the proposal through simulation and practical experiments and confirmed that our proposal effectively transferred multimedia packets over a logical path avoiding congested links. The load on a network is well distributed and the network can accommodate more sessions than OLSRv2 and QOLSR.

  17. The Future of Smart Cards.

    Science.gov (United States)

    Fickes, Michael

    2000-01-01

    Discusses the evolution of smart cards from digital signatures and other innovations into the realm of magnetic-stripe cards to expand their applications. Examples of magnetic-strip smart card usage are examined. (GR)

  18. An acuity cards cookbook.

    Science.gov (United States)

    Vital-Durand, F

    1996-01-01

    Acuity cards are being more commonly used in clinical and screening practice. The author describes his experience from over 6000 infants tested with the method, using two commercially available sets of cards to provide users with comprehensive guidelines to allow them to get the most out of this useful test.

  19. A House of Cards.

    Science.gov (United States)

    Kennedy, Mike

    2000-01-01

    Reviews how technologically enhanced ID cards are helping colleges and universities keep their students and staff safe. The benefits of a one-card system for identification, building access, and financial transactions are highlighted as are the liberal use of security phones and security cameras. (GR)

  20. Mobile Payment Technology and Competitiveness In the Credit Card Chain

    OpenAIRE

    Martins, Guilherme Silveira; FGV-EAESP; Martins, Michele Esteves; FGV-EAESP; Di Serio, Luiz Carlos; FGV-EAESP; Csillag, João Mário; FGV-EAESP; Santos, Camila Aparecida; Freeddom Tecnologia e Serviços S.A.

    2013-01-01

    This paper discusses the value creation sources of Mobile Payment concept into the Credit Card Chain. A case-study was developed based on the Transaction Cost Theory, Value Chain Analysis, RB V, Schumpeterian Innovation, and Strategic Network Theory. The results illustrate the technology potential to modify the configuration of Credit Card chain.

  1. Method card design dimensions

    DEFF Research Database (Denmark)

    Wölfel, Christiane; Merritt, T.

    2013-01-01

    There are many examples of cards used to assist or provide structure to the design process, yet there has not been a thorough articulation of the strengths and weaknesses of the various examples. We review eighteen card-based design tools in order to understand how they might benefit designers....... The card-based tools are explained in terms of five design dimensions including the intended purpose and scope of use, duration of use, methodology, customization, and formal/material qualities. Our analysis suggests three design patterns or archetypes for existing card-based design method tools...... and highlights unexplored areas in the design space. The paper concludes with recommendations for the future development of card-based methods for the field of interaction design....

  2. Signal processing for smart cards

    Science.gov (United States)

    Quisquater, Jean-Jacques; Samyde, David

    2003-06-01

    In 1998, Paul Kocher showed that when a smart card computes cryptographic algorithms, for signatures or encryption, its consumption or its radiations leak information. The keys or the secrets hidden in the card can then be recovered using a differential measurement based on the intercorrelation function. A lot of silicon manufacturers use desynchronization countermeasures to defeat power analysis. In this article we detail a new resynchronization technic. This method can be used to facilitate the use of a neural network to do the code recognition. It becomes possible to reverse engineer a software code automatically. Using data and clock separation methods, we show how to optimize the synchronization using signal processing. Then we compare these methods with watermarking methods for 1D and 2D signal. The very last watermarking detection improvements can be applied to signal processing for smart cards with very few modifications. Bayesian processing is one of the best ways to do Differential Power Analysis, and it is possible to extract a PIN code from a smart card in very few samples. So this article shows the need to continue to set up effective countermeasures for cryptographic processors. Although the idea to use advanced signal processing operators has been commonly known for a long time, no publication explains that results can be obtained. The main idea of differential measurement is to use the cross-correlation of two random variables and to repeat consumption measurements on the processor to be analyzed. We use two processors clocked at the same external frequency and computing the same data. The applications of our design are numerous. Two measurements provide the inputs of a central operator. With the most accurate operator we can improve the signal noise ratio, re-synchronize the acquisition clock with the internal one, or remove jitter. The analysis based on consumption or electromagnetic measurements can be improved using our structure. At first sight

  3. Interfacing with in-Situ Data Networks during the Arctic Boreal Vulnerability Experiment (ABoVE)

    Science.gov (United States)

    McInerney, M.; Griffith, P. C.; Duffy, D.; Hoy, E.; Schnase, J. L.; Sinno, S.; Thompson, J. H.

    2014-12-01

    The Arctic Boreal Vulnerability Experiment (ABoVE) is designed to improve understanding of the causes and impacts of ecological changes in Arctic/boreal regions, and will integrate field-based studies, modeling, and data from airborne and satellite remote sensing. ABoVE will result in a fuller understanding of ecosystem vulnerability and resilience to environmental change in the Arctic and boreal regions of western North America, and provide scientific information required to develop options for societal responses to the impacts of these changes. The studies sponsored by NASA during ABoVE will be coordinated with research and in-situ monitoring activities being sponsored by a number of national and international partners. The NASA Center for Climate Simulation at the Goddard Space Flight Center has partnered with the NASA Carbon Cycle & Ecosystems Office to create a science cloud designed for this field campaign - the ABoVE Science Cloud (ASC). The ASC combines high performance computing with emerging technologies to create an environment specifically designed for large-scale modeling, analysis of remote sensing data, copious disk storage with integrated data management, and integration of core variables from in-situ networks identified by the ABoVE Science Definition Team. In this talk, we will present the scientific requirements driving the development of the ABoVE Science Cloud, discuss the necessary interfaces, both computational and human, with in-situ monitoring networks, and show examples of how the ASC is being used to meet the needs of the ABoVE campaign.

  4. Ensemble of Neural Network Conditional Random Fields for Self-Paced Brain Computer Interfaces

    Directory of Open Access Journals (Sweden)

    Hossein Bashashati

    2017-07-01

    Full Text Available Classification of EEG signals in self-paced Brain Computer Interfaces (BCI is an extremely challenging task. The main difficulty stems from the fact that start time of a control task is not defined. Therefore it is imperative to exploit the characteristics of the EEG data to the extent possible. In sensory motor self-paced BCIs, while performing the mental task, the user’s brain goes through several well-defined internal state changes. Applying appropriate classifiers that can capture these state changes and exploit the temporal correlation in EEG data can enhance the performance of the BCI. In this paper, we propose an ensemble learning approach for self-paced BCIs. We use Bayesian optimization to train several different classifiers on different parts of the BCI hyper- parameter space. We call each of these classifiers Neural Network Conditional Random Field (NNCRF. NNCRF is a combination of a neural network and conditional random field (CRF. As in the standard CRF, NNCRF is able to model the correlation between adjacent EEG samples. However, NNCRF can also model the nonlinear dependencies between the input and the output, which makes it more powerful than the standard CRF. We compare the performance of our algorithm to those of three popular sequence labeling algorithms (Hidden Markov Models, Hidden Markov Support Vector Machines and CRF, and to two classical classifiers (Logistic Regression and Support Vector Machines. The classifiers are compared for the two cases: when the ensemble learning approach is not used and when it is. The data used in our studies are those from the BCI competition IV and the SM2 dataset. We show that our algorithm is considerably superior to the other approaches in terms of the Area Under the Curve (AUC of the BCI system.

  5. Quantum key distribution using card, base station and trusted authority

    Energy Technology Data Exchange (ETDEWEB)

    Nordholt, Jane E.; Hughes, Richard John; Newell, Raymond Thorson; Peterson, Charles Glen; Rosenberg, Danna; McCabe, Kevin Peter; Tyagi, Kush T.; Dallmann, Nicholas

    2017-06-14

    Techniques and tools for quantum key distribution ("QKD") between a quantum communication ("QC") card, base station and trusted authority are described herein. In example implementations, a QC card contains a miniaturized QC transmitter and couples with a base station. The base station provides a network connection with the trusted authority and can also provide electric power to the QC card. When coupled to the base station, after authentication by the trusted authority, the QC card acquires keys through QKD with a trust authority. The keys can be used to set up secure communication, for authentication, for access control, or for other purposes. The QC card can be implemented as part of a smart phone or other mobile computing device, or the QC card can be used as a fillgun for distribution of the keys.

  6. Quantum key distribution using card, base station and trusted authority

    Science.gov (United States)

    Nordholt, Jane Elizabeth; Hughes, Richard John; Newell, Raymond Thorson; Peterson, Charles Glen; Rosenberg, Danna; McCabe, Kevin Peter; Tyagi, Kush T; Dallman, Nicholas

    2015-04-07

    Techniques and tools for quantum key distribution ("QKD") between a quantum communication ("QC") card, base station and trusted authority are described herein. In example implementations, a QC card contains a miniaturized QC transmitter and couples with a base station. The base station provides a network connection with the trusted authority and can also provide electric power to the QC card. When coupled to the base station, after authentication by the trusted authority, the QC card acquires keys through QKD with a trusted authority. The keys can be used to set up secure communication, for authentication, for access control, or for other purposes. The QC card can be implemented as part of a smart phone or other mobile computing device, or the QC card can be used as a fillgun for distribution of the keys.

  7. FELIX: a High-Throughput Network Approach for Interfacing to Front End Electronics for ATLAS Upgrades

    International Nuclear Information System (INIS)

    Anderson, J; Drake, G; Ryu, S; Zhang, J; Borga, A; Boterenbrood, H; Schreuder, F; Vermeulen, J; Chen, H; Chen, K; Lanni, F; Francis, D; Gorini, B; Miotto, G Lehmann; Schumacher, J; Vandelli, W; Levinson, L; Narevicius, J; Roich, A; Plessl, C

    2015-01-01

    The ATLAS experiment at CERN is planning full deployment of a new unified optical link technology for connecting detector front end electronics on the timescale of the LHC Run 4 (2025). It is estimated that roughly 8000 GBT (GigaBit Transceiver) links, with transfer rates up to 10.24 Gbps, will replace existing links used for readout, detector control and distribution of timing and trigger information. A new class of devices will be needed to interface many GBT links to the rest of the trigger, data-acquisition and detector control systems. In this paper FELIX (Front End LInk eXchange) is presented, a PC-based device to route data from and to multiple GBT links via a high-performance general purpose network capable of a total throughput up to O(20 Tbps). FELIX implies architectural changes to the ATLAS data acquisition system, such as the use of industry standard COTS components early in the DAQ chain. Additionally the design and implementation of a FELIX demonstration platform is presented and hardware and software aspects will be discussed. (paper)

  8. Analysis of performance improvements for host and GPU interface of the APENet+ 3D Torus network

    International Nuclear Information System (INIS)

    Ammendola A, R; Biagioni, A; Frezza, O; Lo Cicero, F; Lonardo, A; Paolucci, P S; Rossetti, D; Simula, F; Tosoratto, L; Vicini, P

    2014-01-01

    APEnet+ is an INFN (Italian Institute for Nuclear Physics) project aiming to develop a custom 3-Dimensional torus interconnect network optimized for hybrid clusters CPU-GPU dedicated to High Performance scientific Computing. The APEnet+ interconnect fabric is built on a FPGA-based PCI-express board with 6 bi-directional off-board links showing 34 Gbps of raw bandwidth per direction, and leverages upon peer-to-peer capabilities of Fermi and Kepler-class NVIDIA GPUs to obtain real zero-copy, GPU-to-GPU low latency transfers. The minimization of APEnet+ transfer latency is achieved through the adoption of RDMA protocol implemented in FPGA with specialized hardware blocks tightly coupled with embedded microprocessor. This architecture provides a high performance low latency offload engine for both trasmit and receive side of data transactions: preliminary results are encouraging, showing 50% of bandwidth increase for large packet size transfers. In this paper we describe the APEnet+ architecture, detailing the hardware implementation and discuss the impact of such RDMA specialized hardware on host interface latency and bandwidth

  9. Analysis of performance improvements for host and GPU interface of the APENet+ 3D Torus network

    Science.gov (United States)

    Ammendola A, R.; Biagioni, A.; Frezza, O.; Lo Cicero, F.; Lonardo, A.; Paolucci, P. S.; Rossetti, D.; Simula, F.; Tosoratto, L.; Vicini, P.

    2014-06-01

    APEnet+ is an INFN (Italian Institute for Nuclear Physics) project aiming to develop a custom 3-Dimensional torus interconnect network optimized for hybrid clusters CPU-GPU dedicated to High Performance scientific Computing. The APEnet+ interconnect fabric is built on a FPGA-based PCI-express board with 6 bi-directional off-board links showing 34 Gbps of raw bandwidth per direction, and leverages upon peer-to-peer capabilities of Fermi and Kepler-class NVIDIA GPUs to obtain real zero-copy, GPU-to-GPU low latency transfers. The minimization of APEnet+ transfer latency is achieved through the adoption of RDMA protocol implemented in FPGA with specialized hardware blocks tightly coupled with embedded microprocessor. This architecture provides a high performance low latency offload engine for both trasmit and receive side of data transactions: preliminary results are encouraging, showing 50% of bandwidth increase for large packet size transfers. In this paper we describe the APEnet+ architecture, detailing the hardware implementation and discuss the impact of such RDMA specialized hardware on host interface latency and bandwidth.

  10. Analysis of performance improvements for host and GPU interface of the APENet+ 3D Torus network

    Energy Technology Data Exchange (ETDEWEB)

    Ammendola A, R [INFN Roma II, Via della Ricerca Scientifica 1 – 00133 Roma (Italy); Biagioni, A; Frezza, O; Lo Cicero, F; Lonardo, A; Paolucci, P S; Rossetti, D; Simula, F; Tosoratto, L; Vicini, P [INFN Roma I, P.le Aldo Moro 2 – 00185 Roma (Italy)

    2014-06-06

    APEnet+ is an INFN (Italian Institute for Nuclear Physics) project aiming to develop a custom 3-Dimensional torus interconnect network optimized for hybrid clusters CPU-GPU dedicated to High Performance scientific Computing. The APEnet+ interconnect fabric is built on a FPGA-based PCI-express board with 6 bi-directional off-board links showing 34 Gbps of raw bandwidth per direction, and leverages upon peer-to-peer capabilities of Fermi and Kepler-class NVIDIA GPUs to obtain real zero-copy, GPU-to-GPU low latency transfers. The minimization of APEnet+ transfer latency is achieved through the adoption of RDMA protocol implemented in FPGA with specialized hardware blocks tightly coupled with embedded microprocessor. This architecture provides a high performance low latency offload engine for both trasmit and receive side of data transactions: preliminary results are encouraging, showing 50% of bandwidth increase for large packet size transfers. In this paper we describe the APEnet+ architecture, detailing the hardware implementation and discuss the impact of such RDMA specialized hardware on host interface latency and bandwidth.

  11. REPLACEMENT OF FRENCH CARDS

    CERN Multimedia

    Human Resources Division

    2001-01-01

    The French Ministry of Foreign Affairs has informed the Organization that it is shortly to replace all diplomatic cards, special cards and employment permits ('attestations de fonctions') now held by members of the personnel and their families. Between 2 July and 31 December 2001, these cards are to be replaced by secure, computerized equivalents. A 'personnel office' stamped photocopy of the old cards may continue to be used until 31 December 2001. For the purposes of the handover, members of the personnel must go personally to the cards office (33/1-015), between 8:30 and 12:30, in order to fill a 'fiche individuelle' form (in black ink only), which has to be personally signed by themselves and another separately signed by members of their family, taking the following documents for themselves and members of their families already in possession of a French card : A recent identity photograph in 4.5 cm x 3.5 cm format (signed on the back) The French card in their possession an A4 photocopy of the same Fre...

  12. Credit Card Quiz.

    Science.gov (United States)

    Marks, Jeff

    2000-01-01

    Describes an activity in which students design credit cards and discover for themselves the mathematical realities of buying on credit. Employs multiple-intelligence theory to increase the chance that all students will be reached. (YDS)

  13. Dynamic Virtual Credit Card Numbers

    Science.gov (United States)

    Molloy, Ian; Li, Jiangtao; Li, Ninghui

    Theft of stored credit card information is an increasing threat to e-commerce. We propose a dynamic virtual credit card number scheme that reduces the damage caused by stolen credit card numbers. A user can use an existing credit card account to generate multiple virtual credit card numbers that are either usable for a single transaction or are tied with a particular merchant. We call the scheme dynamic because the virtual credit card numbers can be generated without online contact with the credit card issuers. These numbers can be processed without changing any of the infrastructure currently in place; the only changes will be at the end points, namely, the card users and the card issuers. We analyze the security requirements for dynamic virtual credit card numbers, discuss the design space, propose a scheme using HMAC, and prove its security under the assumption the underlying function is a PRF.

  14. Imaging standards for smart cards

    Science.gov (United States)

    Ellson, Richard N.; Ray, Lawrence A.

    1996-02-01

    "Smart cards" are plastic cards the size of credit cards which contain integrated circuits for the storage of digital information. The applications of these cards for image storage has been growing as card data capacities have moved from tens of bytes to thousands of bytes. This has prompted the recommendation of standards by the X3B10 committee of ANSI for inclusion in ISO standards for card image storage of a variety of image data types including digitized signatures and color portrait images. This paper will review imaging requirements of the smart card industry, challenges of image storage for small memory devices, card image communications, and the present status of standards. The paper will conclude with recommendations for the evolution of smart card image standards towards image formats customized to the image content and more optimized for smart card memory constraints.

  15. Exploration of the biomacromolecular interactions of an interpenetrating proteo-saccharide hydrogel network at the mucosal interface

    CSIR Research Space (South Africa)

    Mashingaidze, F

    2013-09-01

    Full Text Available EXPLORATION OF THE BIOMACROMOLECULAR INTERACTIONS OF AN INTERPENETRATING PROTEO-SACCHARIDE HYDROGEL NETWORK AT THE MUCOSAL INTERFACE 1Felix Mashingaidze, 1Yahya E. Choonara, 1Pradeep Kumar, 1Lisa C. du Toit, 2Vinesh Maharaj, 3Eckhart Buchmann, 4Valence M..., Department of Biosciences, Meiring Naud_e Road, Brummeria, Pretoria, South Africa 3University of the Witwatersrand, Faculty of Health Sciences, Department of Obstetrics and Gynecology, 7 York Road, Parktown, 2193, Johannesburg, South Africa 4St. John’s...

  16. A Literature Review on Operator Interface Technologies for Network Enabled Operational Environments Using Complex System Analysis

    Science.gov (United States)

    2009-05-30

    d’interface fondées sur le comportement et sur la psychologie , ainsi que des méthodes de conception et de mise en œuvre d’interfaces multi-agents. On a mis...réseaucentriques. Ces technologies comprennent des approches de conception d’interface fondées sur le comportement et sur la psychologie , ainsi que des

  17. A graphical user interface for a method to infer kinetics and network architecture (MIKANA).

    Science.gov (United States)

    Mourão, Márcio A; Srividhya, Jeyaraman; McSharry, Patrick E; Crampin, Edmund J; Schnell, Santiago

    2011-01-01

    One of the main challenges in the biomedical sciences is the determination of reaction mechanisms that constitute a biochemical pathway. During the last decades, advances have been made in building complex diagrams showing the static interactions of proteins. The challenge for systems biologists is to build realistic models of the dynamical behavior of reactants, intermediates and products. For this purpose, several methods have been recently proposed to deduce the reaction mechanisms or to estimate the kinetic parameters of the elementary reactions that constitute the pathway. One such method is MIKANA: Method to Infer Kinetics And Network Architecture. MIKANA is a computational method to infer both reaction mechanisms and estimate the kinetic parameters of biochemical pathways from time course data. To make it available to the scientific community, we developed a Graphical User Interface (GUI) for MIKANA. Among other features, the GUI validates and processes an input time course data, displays the inferred reactions, generates the differential equations for the chemical species in the pathway and plots the prediction curves on top of the input time course data. We also added a new feature to MIKANA that allows the user to exclude a priori known reactions from the inferred mechanism. This addition improves the performance of the method. In this article, we illustrate the GUI for MIKANA with three examples: an irreversible Michaelis-Menten reaction mechanism; the interaction map of chemical species of the muscle glycolytic pathway; and the glycolytic pathway of Lactococcus lactis. We also describe the code and methods in sufficient detail to allow researchers to further develop the code or reproduce the experiments described. The code for MIKANA is open source, free for academic and non-academic use and is available for download (Information S1).

  18. Regulating debit cards: the case of ad valorem fees

    OpenAIRE

    Zhu Wang

    2010-01-01

    Debit cards have become an indispensable part of the U.S. payments system, accounting for more than a third of consumer payments at point of sale. With this development has come controversy: Card networks charge merchants fees that merchants believe are too high. And most of the fees are ad valorem that is, based on transaction value rather than fixed fees per transaction. ; Given that debit cards incur a fixed cost per transaction, why do networks charge ad valorem fees? How do ad valorem fe...

  19. Digitizing Villanova University's Eclipsing Binary Card Catalogue

    Science.gov (United States)

    Guzman, Giannina; Dalton, Briana; Conroy, Kyle; Prsa, Andrej

    2018-01-01

    Villanova University’s Department of Astrophysics and Planetary Science has years of hand-written archival data on Eclipsing Binaries at its disposal. This card catalog began at Princeton in the 1930’s with notable contributions from scientists such as Henry Norris Russel. During World War II, the archive was moved to the University of Pennsylvania, which was one of the world centers for Eclipsing Binary research, consequently, the contributions to the catalog during this time were immense. It was then moved to University of Florida at Gainesville before being accepted by Villanova in the 1990’s. The catalog has been kept in storage since then. The objective of this project is to digitize this archive and create a fully functional online catalog that contains the information available on the cards, along with the scan of the actual cards. Our group has built a database using a python-powered infrastructure to contain the collected data. The team also built a prototype web-based searchable interface as a front-end to the catalog. Following the data-entry process, information like the Right Ascension and Declination will be run against SIMBAD and any differences between values will be noted as part of the catalog. Information published online from the card catalog and even discrepancies in information for a star, could be a catalyst for new studies on these Eclipsing Binaries. Once completed, the database-driven interface will be made available to astronomers worldwide. The group will also acquire, from the database, a list of referenced articles that have yet to be found online in order to further pursue their digitization. This list will be comprised of references in the cards that were neither found on ADS nor online during the data-entry process. Pursuing the integration of these references to online queries such as ADS will be an ongoing process that will contribute and further facilitate studies on Eclipsing Binaries.

  20. 26 CFR 301.6311-2 - Payment by credit card and debit card.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Payment by credit card and debit card. 301.6311....6311-2 Payment by credit card and debit card. (a) Authority to receive—(1) Payments by credit card and debit card. Internal revenue taxes may be paid by credit card or debit card as authorized by this...

  1. Interfacing Nuclear Security and Safeguards through Education and Support Centre Networks

    International Nuclear Information System (INIS)

    Nikonov, D.

    2015-01-01

    This paper presents the work of the International Nuclear Security Education Network (INSEN) and the International Nuclear Security Training and Support Centre Network (NSSC) as the means to achieve sustainable human resource development in member states. The paper also examines how both security and safeguards can benefit from collaborative and coordinated activities when such networks focus on practical achievements. (author)

  2. Research on the SIM card implementing functions of transport card

    Science.gov (United States)

    Li, Yi; Wang, Lin

    2015-12-01

    This paper is based on the analysis for theory and key technologies of contact communication, contactless communication card and STK menu, and proposes complete software and hardware solution for achieving convenience and secure mobile payment system on SIM card.

  3. Characterizing Design Process Interfaces as Organization Networks: Insights for Engineering Systems Management

    DEFF Research Database (Denmark)

    Ruiz, Pedro Parraguez; Eppinger, Steven; Maier, Anja

    2016-01-01

    The engineering design literature has provided guidance on how to identify and analyze design activities and their information dependencies. However, a systematic characterization of process interfaces between engineering design activities is missing, and the impact of structural and compositional...

  4. Graphical User Interface Tool Kit for Path-Based Network Policy Language

    National Research Council Canada - National Science Library

    Ekin, Tufan

    2002-01-01

    .... Two of the changes are related to the semantics of the language. A graphical user interface tool kit for creating, validating, archiving and compiling policies represented in PPL has been developed...

  5. Biometrics and smart cards combine to offer high security

    International Nuclear Information System (INIS)

    Seidman, S.

    1986-01-01

    This paper discusses the Smart Card a plastic credit card sized package with an embedded computer chip which encompasses a level of technical sophistication which makes it virtually impossible to counterfeit. The question of legitimacy of the person using the Card for physical, computer, or network access can be answered by storing a biometric template of the authorized user in the Smart Card's unalterable memory. The bimetric template can be based upon a retina print, a hand print, a finger print, a wrist-vein print, a voice print, or pseudo-biometrics, such as signature dynamics, gait dynamics or keyboard typing patterns. These Cards will function only when they are being used by the authorized individuals to whom they are issued

  6. Disruption - Access cards service

    CERN Multimedia

    2014-01-01

    We would like to inform you that between 10 November and 15 December 2014, the access cards service in Building 55 will be disrupted, as the GS Department has decided to improve the facilities for users of this building. During the work, you will find the registration, biometric registration and dosimeter exchange services on the second floor of Building 55 and the vehicle sticker service on the ground floor along with the access cards service. We thank you for your understanding and apologise for any inconvenience caused.

  7. Real-time distributed simulation using the Modular Modeling System interfaced to a Bailey NETWORK 90 system

    International Nuclear Information System (INIS)

    Edwards, R.M.; Turso, J.A.; Garcia, H.E.; Ghie, M.H.; Dharap, S.; Lee, S.

    1991-01-01

    The Modular Modeling System was adapted for real-time simulation testing of diagnostic expert systems in 1987. The early approach utilized an available general purpose mainframe computer which operated the simulation and diagnostic program in the multitasking environment of the mainframe. That research program was subsequently expanded to intelligent distributed control applications incorporating microprocessor based controllers with the aid of an equipment grant from the National Science Foundation (NSF). The Bailey NETWORK 90 microprocessor-based control system, acquired with the NSF grant, has been operational since April of 1990 and has been interfaced to both VAX mainframe and PC simulations of power plant processes in order to test and demonstrate advanced control and diagnostic concepts. This paper discusses the variety of techniques that have been used and which are under development to interface simulations and other distributed control functions to the Penn State Bailey system

  8. Development traumatic brain injury computer user interface for disaster area in Indonesia supported by emergency broadband access network.

    Science.gov (United States)

    Sutiono, Agung Budi; Suwa, Hirohiko; Ohta, Toshizumi; Arifin, Muh Zafrullah; Kitamura, Yohei; Yoshida, Kazunari; Merdika, Daduk; Qiantori, Andri; Iskandar

    2012-12-01

    Disasters bring consequences of negative impacts on the environment and human life. One of the common cause of critical condition is traumatic brain injury (TBI), namely, epidural (EDH) and subdural hematoma (SDH), due to downfall hard things during earthquake. We proposed and analyzed the user response, namely neurosurgeon, general doctor/surgeon and nurse when they interacted with TBI computer interface. The communication systems was supported by TBI web based applications using emergency broadband access network with tethered balloon and simulated in the field trial to evaluate the coverage area. The interface consisted of demography data and multi tabs for anamnesis, treatment, follow up and teleconference interfaces. The interface allows neurosurgeon, surgeon/general doctors and nurses to entry the EDH and SDH patient's data during referring them on the emergency simulation and evaluated based on time needs and their understanding. The average time needed was obtained after simulated by Lenovo T500 notebook using mouse; 8-10 min for neurosurgeons, 12-15 min for surgeons/general doctors and 15-19 min for nurses. By using Think Pad X201 Tablet, the time needed for entry data was 5-7 min for neurosurgeon, 7-10 min for surgeons/general doctors and 12-16 min for nurses. We observed that the time difference was depending on the computer type and user literacy qualification as well as their understanding on traumatic brain injury, particularly for the nurses. In conclusion, there are five data classification for simply TBI GUI, namely, 1) demography, 2) specific anamnesis for EDH and SDH, 3) treatment action and medicine of TBI, 4) follow up data display and 5) teleneurosurgery for streaming video consultation. The type of computer, particularly tablet PC was more convenient and faster for entry data, compare to that computer mouse touched pad. Emergency broadband access network using tethered balloon is possible to be employed to cover the communications systems in

  9. Scalable coherent interface

    International Nuclear Information System (INIS)

    Alnaes, K.; Kristiansen, E.H.; Gustavson, D.B.; James, D.V.

    1990-01-01

    The Scalable Coherent Interface (IEEE P1596) is establishing an interface standard for very high performance multiprocessors, supporting a cache-coherent-memory model scalable to systems with up to 64K nodes. This Scalable Coherent Interface (SCI) will supply a peak bandwidth per node of 1 GigaByte/second. The SCI standard should facilitate assembly of processor, memory, I/O and bus bridge cards from multiple vendors into massively parallel systems with throughput far above what is possible today. The SCI standard encompasses two levels of interface, a physical level and a logical level. The physical level specifies electrical, mechanical and thermal characteristics of connectors and cards that meet the standard. The logical level describes the address space, data transfer protocols, cache coherence mechanisms, synchronization primitives and error recovery. In this paper we address logical level issues such as packet formats, packet transmission, transaction handshake, flow control, and cache coherence. 11 refs., 10 figs

  10. War of the Credit Cards.

    Science.gov (United States)

    Nicklin, Julie L.

    1993-01-01

    Increasingly, colleges are offering affinity credit cards with attractive incentives as a marketing tool. Some in academe feel the trend may compromise educational objectives. Institutions may also face taxation on unrelated-business income generated through the cards. (MSE)

  11. NCDC Punched Card Reference Manuals

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Documentation for using and reading punched cards kept at the National Weather Records Center (NWRC, previous name for NCDC and NCEI). Many of these punched card...

  12. Smart Icon Cards

    Science.gov (United States)

    Dunbar, Laura

    2015-01-01

    Icons are frequently used in the music classroom to depict concepts in a developmentally appropriate way for students. SmartBoards provide music educators yet another way to share these manipulatives with students. This article provides a step-by-step tutorial to create Smart Icon Cards using the folk song "Lucy Locket."

  13. Follow Up: Credit Card Caution

    Science.gov (United States)

    Cahill, Timothy P.

    2007-01-01

    In "Pushing Plastic," ("The New England Journal of Higher Education", Summer 2007), John Humphrey notes that many college administrators justify their credit card solicitations by suggesting that credit card access will help students learn to manage their own finances. Instead, credit card debt will teach thousands of students…

  14. Store Security. Credit Card Fraud.

    Science.gov (United States)

    Brockway, Jerry

    The manual, intended for use by adults and not in the high school classroom situation, presents material directed toward assisting in the reduction of credit card crime. This teaching guide is organized in three sections which deal with the nature of and major reasons for credit card fraud, the types of hot card runners, and methods of reducing…

  15. Fencing network direct memory access data transfers in a parallel active messaging interface of a parallel computer

    Science.gov (United States)

    Blocksome, Michael A.; Mamidala, Amith R.

    2015-07-07

    Fencing direct memory access (`DMA`) data transfers in a parallel active messaging interface (`PAMI`) of a parallel computer, the PAMI including data communications endpoints, each endpoint including specifications of a client, a context, and a task, the endpoints coupled for data communications through the PAMI and through DMA controllers operatively coupled to a deterministic data communications network through which the DMA controllers deliver data communications deterministically, including initiating execution through the PAMI of an ordered sequence of active DMA instructions for DMA data transfers between two endpoints, effecting deterministic DMA data transfers through a DMA controller and the deterministic data communications network; and executing through the PAMI, with no FENCE accounting for DMA data transfers, an active FENCE instruction, the FENCE instruction completing execution only after completion of all DMA instructions initiated prior to execution of the FENCE instruction for DMA data transfers between the two endpoints.

  16. On-chip network interfaces supporting automatic burst write creation, posted writes and read prefetch

    NARCIS (Netherlands)

    Stefan, R.; Windt, de J.; Goossens, K.G.W.

    2010-01-01

    Networks-on-Chip are seen as a scalable solution for facilitating the development of Systems-on-Chip with an increasing number of IP cores. Many studies already address the implementation details of such networks and a large effort has been invested in optimizing the routing strategy and the

  17. SUPPORT CARD FOR THE FORWARD SCT MODULE

    CERN Document Server

    Greenall, A

    2002-01-01

    Previously in the development and testing stage of ATLAS SCT Forward modules support cards have been used which interface the module to the DAQ by using only the Redundant inputs for the module configuration and the 'spying' of the ABCD Master chip(s) data. As module development has matured there is now a necessity to be able to test modules in the laboratory using also their Primary input/output data routes i.e. using the optical chips DORIC [1] and VDC [2] but without the need of optical fibres. A Forward Kapton Support Card, FKSC, has been developed so that both Primary and Redundant data routes can be used for module testing.

  18. Neural growth into a microchannel network: towards a regenerative neural interface

    NARCIS (Netherlands)

    Wieringa, P.A.; Wiertz, Remy; le Feber, Jakob; Rutten, Wim

    2009-01-01

    We propose and validated a design for a highly selective 'endcap' regenerative neural interface towards a neuroprosthesis. In vitro studies using rat cortical neurons determine if a branching microchannel structure can counter fasciculated growth and cause neurites to separte from one another,

  19. Comparison of the performance and security of free and open source smart card offcard APIs

    CSIR Research Space (South Africa)

    Chifura, A

    2008-09-01

    Full Text Available . Off card APIs provide a framework for this by providing interfaces that can be implemented to enhance the communication. This study looks at the performance and security comparisons of several free and open source smart card offcard APIs...

  20. How does network governance affect social-ecological fit across the land-sea interface? An empirical assessment from the Lesser Antilles

    Directory of Open Access Journals (Sweden)

    Jeremy Pittman

    2017-12-01

    Full Text Available Governance across the land-sea interface presents many challenges related to (1 the engagement of diverse actors and systems of knowledge, (2 the coordinated management of shared ecological resources, and (3 the development of mechanisms to address or account for biogeochemical (e.g., nutrient flows and ecological (e.g., species movements interdependencies between marine and terrestrial systems. If left unaddressed, these challenges can lead to multiple problems of social-ecological fit stemming from governance fragmentation or inattention to various components of land-sea systems. Network governance is hypothesized to address these multiple challenges, yet its specific role in affecting social-ecological fit across the land-sea interface is not well understood. We aim to improve this understanding by examining how network governance affects social-ecological fit across the land-sea interface in two empirical case studies from the Lesser Antilles: Dominica and Saint Lucia. We found that network governance plays a clear role in coordinating management of shared resources and providing capacity to address interactions between ecological entities. Yet, its potential role in engaging diverse actors and addressing, specifically, biogeochemical interactions across the land-sea interface has not been fully realized. Our research suggests that network governance is beneficial, but not sufficient, to improve social-ecological fit across the land-sea interface. Strategically leveraging the network processes (e.g., triadic closure leading to the existing governance networks could prove useful in addressing the current deficiencies in the networks. Additionally, the interplay between hierarchical and networked modes of governance appears to be a critical issue in determining social-ecological fit at the land-sea interface.

  1. Virtual reality interface devices in the reorganization of neural networks in the brain of patients with neurological diseases

    Science.gov (United States)

    Gatica-Rojas, Valeska; Méndez-Rebolledo, Guillermo

    2014-01-01

    Two key characteristics of all virtual reality applications are interaction and immersion. Systemic interaction is achieved through a variety of multisensory channels (hearing, sight, touch, and smell), permitting the user to interact with the virtual world in real time. Immersion is the degree to which a person can feel wrapped in the virtual world through a defined interface. Virtual reality interface devices such as the Nintendo® Wii and its peripheral nunchuks-balance board, head mounted displays and joystick allow interaction and immersion in unreal environments created from computer software. Virtual environments are highly interactive, generating great activation of visual, vestibular and proprioceptive systems during the execution of a video game. In addition, they are entertaining and safe for the user. Recently, incorporating therapeutic purposes in virtual reality interface devices has allowed them to be used for the rehabilitation of neurological patients, e.g., balance training in older adults and dynamic stability in healthy participants. The improvements observed in neurological diseases (chronic stroke and cerebral palsy) have been shown by changes in the reorganization of neural networks in patients’ brain, along with better hand function and other skills, contributing to their quality of life. The data generated by such studies could substantially contribute to physical rehabilitation strategies. PMID:25206907

  2. Virtual reality interface devices in the reorganization of neural networks in the brain of patients with neurological diseases.

    Science.gov (United States)

    Gatica-Rojas, Valeska; Méndez-Rebolledo, Guillermo

    2014-04-15

    Two key characteristics of all virtual reality applications are interaction and immersion. Systemic interaction is achieved through a variety of multisensory channels (hearing, sight, touch, and smell), permitting the user to interact with the virtual world in real time. Immersion is the degree to which a person can feel wrapped in the virtual world through a defined interface. Virtual reality interface devices such as the Nintendo® Wii and its peripheral nunchuks-balance board, head mounted displays and joystick allow interaction and immersion in unreal environments created from computer software. Virtual environments are highly interactive, generating great activation of visual, vestibular and proprioceptive systems during the execution of a video game. In addition, they are entertaining and safe for the user. Recently, incorporating therapeutic purposes in virtual reality interface devices has allowed them to be used for the rehabilitation of neurological patients, e.g., balance training in older adults and dynamic stability in healthy participants. The improvements observed in neurological diseases (chronic stroke and cerebral palsy) have been shown by changes in the reorganization of neural networks in patients' brain, along with better hand function and other skills, contributing to their quality of life. The data generated by such studies could substantially contribute to physical rehabilitation strategies.

  3. Hardware and Software Design of FPGA-based PCIe Gen3 interface for APEnet+ network interconnect system

    International Nuclear Information System (INIS)

    Ammendola, R.; Biagioni, A.; Frezza, O.; Cicero, F. Lo; Lonardo, A; Martinelli, M.; Paolucci, P. S.; Pastorelli, E.; Simula, F.; Tosoratto, L.; Vicini, P.; Rossetti, D.

    2015-01-01

    In the attempt to develop an interconnection architecture optimized for hybrid HPC systems dedicated to scientific computing, we designed APEnet+, a point-to-point, low-latency and high-performance network controller supporting 6 fully bidirectional off-board links over a 3D torus topology.The first release of APEnet+ (named V4) was a board based on a 40 nm Altera FPGA, integrating 6 channels at 34 Gbps of raw bandwidth per direction and a PCIe Gen2 x8 host interface. It has been the first-of-its-kind device to implement an RDMA protocol to directly read/write data from/to Fermi and Kepler NVIDIA GPUs using NVIDIA peer-to-peer and GPUDirect RDMA protocols, obtaining real zero-copy GPU-to-GPU transfers over the network.The latest generation of APEnet+ systems (now named V5) implements a PCIe Gen3 x8 host interface on a 28 nm Altera Stratix V FPGA, with multi-standard fast transceivers (up to 14.4 Gbps) and an increased amount of configurable internal resources and hardware IP cores to support main interconnection standard protocols.Herein we present the APEnet+ V5 architecture, the status of its hardware and its system software design. Both its Linux Device Driver and the low-level libraries have been redeveloped to support the PCIe Gen3 protocol, introducing optimizations and solutions based on hardware/software co-design. (paper)

  4. Hardware and Software Design of FPGA-based PCIe Gen3 interface for APEnet+ network interconnect system

    Science.gov (United States)

    Ammendola, R.; Biagioni, A.; Frezza, O.; Lo Cicero, F.; Lonardo, A.; Martinelli, M.; Paolucci, P. S.; Pastorelli, E.; Rossetti, D.; Simula, F.; Tosoratto, L.; Vicini, P.

    2015-12-01

    In the attempt to develop an interconnection architecture optimized for hybrid HPC systems dedicated to scientific computing, we designed APEnet+, a point-to-point, low-latency and high-performance network controller supporting 6 fully bidirectional off-board links over a 3D torus topology. The first release of APEnet+ (named V4) was a board based on a 40 nm Altera FPGA, integrating 6 channels at 34 Gbps of raw bandwidth per direction and a PCIe Gen2 x8 host interface. It has been the first-of-its-kind device to implement an RDMA protocol to directly read/write data from/to Fermi and Kepler NVIDIA GPUs using NVIDIA peer-to-peer and GPUDirect RDMA protocols, obtaining real zero-copy GPU-to-GPU transfers over the network. The latest generation of APEnet+ systems (now named V5) implements a PCIe Gen3 x8 host interface on a 28 nm Altera Stratix V FPGA, with multi-standard fast transceivers (up to 14.4 Gbps) and an increased amount of configurable internal resources and hardware IP cores to support main interconnection standard protocols. Herein we present the APEnet+ V5 architecture, the status of its hardware and its system software design. Both its Linux Device Driver and the low-level libraries have been redeveloped to support the PCIe Gen3 protocol, introducing optimizations and solutions based on hardware/software co-design.

  5. Continued Development and Implementation of the Universal Network Interface Device (UNID) II, Digital Engineering Laboratory Network (DELNET) Volume 1.

    Science.gov (United States)

    1984-12-01

    3. It is assuied that the network software design as J,!veloed functions properly. Sum.mary of Current Knowlede [re aost tip to late sumfnary of the...conversations with the program management staff regarding multi-user and multi-level security issues related to the Integrated-Service/Agency Automated

  6. Port Card Module

    International Nuclear Information System (INIS)

    Utes, M.

    1994-01-01

    The Port Card will be one link in the data acquisition system for the D0 Silicon Vertex Detector. This system consists of the following parts, starting at the detector: Silicon strip detectors are mounted in a spaceframe and wire-bonded to custom bare-die integrated circuits (SVX-II chips) that digitize the charge collected by the strips. The 128-channel chips are mounted on a High-Density Interconnect (HDI) that consists of a small flex circuit that routes control signals and eight data bits for each of three to ten chips onto a common data bus. A cable then routes this bus approximately thirty feet out from the detector to the Port Card. The Port Card houses a commercial chipset that serializes the data in real time and converts the signal into laser light impulses that are then transmitted through a multi-mode optical fiber about 150 feet to a Silicon Acquisition and Readout board (SAR). Here, the data is transformed back to parallel electrical signals that are stored in one of several banks of FIFO memories. The FIFOs place their data onto the VME backplane to a VME Buffer Driver (VBD) which stores the event data in buffers for eventual readout over a thirty-two signal ribbon cable to the Level Two Computers and subsequent tape storage. Control and sequencing of the whole operation starts with the Silicon Acquisition/Readout Controller (SARC) working in tandem with the D0 Clock System. The SARC resides in the same VME crate as the SARs, and transforms signals from the Trigger System into control codes distributed to the various Port Cards via optical fibers operating at 53 Mb/s. It is through these control codes that data taking operations such as data-acquisition, digitization, readout, and various resets can be carried out. The Port Card receives the control codes and manipulates the SVX-II chips in the proper way to effect proper data taking. There will be a total of about 700,000 channels, which translates into about 5580 SVX-II chips, 66 to 100 Port Cards

  7. Design and Synthesis of Network-Forming Triblock Copolymers Using Tapered Block Interfaces

    OpenAIRE

    Kuan, Wei-Fan; Roy, Raghunath; Rong, Lixia; Hsiao, Benjamin S.; Epps, Thomas H.

    2012-01-01

    We report a strategy for generating novel dual-tapered poly(isoprene-b-isoprene/styrene-b-styrene-b-styrene/methyl methacrylate-b-methyl methacrylate) [P(I-IS-S-SM-M)] triblock copolymers that combines anionic polymerization, atom transfer radical polymerization (ATRP), and Huisgen 1,3-dipolar cycloaddition click chemistry. The tapered interfaces between blocks were synthesized via a semi-batch feed using programmable syringe pumps. This strategy allows us to manipulate the transition region ...

  8. Japanese Tarot Cards

    Directory of Open Access Journals (Sweden)

    Laura Miller

    2017-04-01

    Full Text Available This essay looks at selected images from tarot decks designed in Japan. Tarot decks reflect a deliberate adaptation process across both cultural and temporal borders, with visual components created and customized for a Japanese viewer. My aim is to consider the nature of these changes in imagery and to focus attention on an under-analyzed and mostly female-gendered domain. In particular, I look at the way the medieval European people and elements originally found on the cards are replaced with images from the world of Japanese art, history, and popular culture. These substitutions either gloss over the gaps between Western and Japanese world views or meld them into a new form, allowing the tarot entry into a different or hybrid metaphysical culture. Attention to tarot cards is important because of their great economic and cultural impact in contemporary Japan. A widespread love of tarot in Japan provides insight into domains of pleasure, spiritual exploration, and fandom.

  9. Japanese Tarot Cards

    OpenAIRE

    Laura Miller

    2017-01-01

    This essay looks at selected images from tarot decks designed in Japan. Tarot decks reflect a deliberate adaptation process across both cultural and temporal borders, with visual components created and customized for a Japanese viewer. My aim is to consider the nature of these changes in imagery and to focus attention on an under-analyzed and mostly female-gendered domain. In particular, I look at the way the medieval European people and elements originally found on the cards are replaced wit...

  10. Selecting e-Purse Smart Card Technology via Fuzzy AHP and ANP

    Directory of Open Access Journals (Sweden)

    Nurgül Demirtaş

    2014-01-01

    Full Text Available Developments in the information technologies provide important advantages to consumers and companies. Nowadays, smart card technology starts to use e-purse applications. The aim of this paper is to identify the most important decision criteria to select the best card technology. In this study, at first smart card and multiple selection techniques were explained. Then the best card technology was selected for an e-purse application. The three types of card technologies were examined and the most important criteria were taken into account by the software developer while they develop card software. Fuzzy analytic hierarchy process (FAHP and analytical network process (ANP techniques were used to compare smart card technologies.

  11. Implications of the dependence of neuronal activity on neural network states for the design of brain-machine interfaces

    Directory of Open Access Journals (Sweden)

    Stefano ePanzeri

    2016-04-01

    Full Text Available Brain-machine interfaces (BMIs can improve the quality of life of patients with sensory and motor disabilities by both decoding motor intentions expressed by neural activity, and by encoding artificially sensed information into patterns of neural activity elicited by causal interventions on the neural tissue. Yet, current BMIs can exchange relatively small amounts of information with the brain. This problem has proved difficult to overcome by simply increasing the number of recording or stimulating electrodes, because trial-to-trial variability of neural activity partly arises from intrinsic factors (collectively known as the network state that include ongoing spontaneous activity and neuromodulation, and so is shared among neurons. Here we review recent progress in characterizing the state dependence of neural responses, and in particular of how neural responses depend on endogenous slow fluctuations of network excitability. We then elaborate on how this knowledge may be used to increase the amount of information that BMIs exchange with brains. Knowledge of network state can be used to fine-tune the stimulation pattern that should reliably elicit a target neural response used to encode information in the brain, and to discount part of the trial-by-trial variability of neural responses, so that they can be decoded more accurately.

  12. The impacts of smart cards on hospital information systems--an investigation of the first phase of the national health insurance smart card project in Taiwan.

    Science.gov (United States)

    Liu, Chien-Tsai; Yang, Pei-Tun; Yeh, Yu-Ting; Wang, Bin-Long

    2006-02-01

    To investigate the impacts of the first phase of Taiwan's Bureau of National Health Insurance (TBNHI) smart card project on existing hospital information systems. TBNHI has launched a nationwide project for replacement of its paper-based health insurance cards by smart cards (or NHI-IC cards) since November 1999. The NHI-IC cards have been used since 1 July 2003, and they have fully replaced the paper-based cards since 1 January 2004. Hospitals must support the cards in order to provide medical services for insured patients. We made a comprehensive study of the current phase of the NHI-IC card system, and conducted a questionnaire survey (from 1 October to 30 November, 2003) to investigate the impacts of NHI-IC cards on the existing hospital information systems. A questionnaire was distributed by mail to 479 hospitals, including 23 medical centers, 71 regional hospitals, and 355 district hospitals. The returned questionnaires were also collected by prepaid mail. The questionnaire return rates of the medical centers, regional hospitals and district hospitals were 39.1, 29.6 and 20.9%, respectively. In phase 1 of the project, the average number of card readers purchased per medical center, regional hospital, and district hospital were 202, 45 and 10, respectively. The average person-days for the enhancement of existing information systems of a medical center, regional hospital and district hospital were 175, 74 and 58, respectively. Three months after using the NHI-IC cards most hospitals (60.6%) experienced prolonged service time for their patients due to more interruptions caused mainly by: (1) impairment of the NHI-IC cards (31.2%), (2) failure in authentication of the SAMs (17.0%), (3) malfunction in card readers (15.3%) and (4) problems with interfaces between the card readers and hospital information systems (15.8%). The overall hospital satisfaction on the 5-point Likert scale was 2.86. Although most hospitals were OK with the project, there was about 22

  13. CARDS MARKET – A RESISTANT MARKET TO CRISIS

    Directory of Open Access Journals (Sweden)

    Tudose Geanina - Gabriela

    2012-07-01

    Full Text Available At the same time with the development of market and consumer behavior of Romanians, the growth rate of cards market accelerated. Of course, infrastructure and acceptance network were very important, they are the factors that allowed the widespread use of cards. Currently, any natural person or legal entity is engaged in commercial relationships involving financial transactions, the electronic payments having an important role, representing virtually future transactions, both nationally and across borders. The financial institutions have made a more rapid segmentation of the portfolio of cards and began to focus increasingly on services and benefits situated behind the payment instruments. Meanwhile, cardholders were becoming more educated and sophisticated, knowing what to ask of cards. More, many financial institutions have adapted so that network to accept chip cards. On the Romanian market, the chip cards will increase which are much more effective in terms of security transactions, as well as for co-branded cards, that offers the possibility of the loyalty of the customers. They will try to get as many benefits from different types of cards, but at the same time, they will focus on niche products, business cards, cards for shopping or for payment of public services. The scientific paper aims to capture aspects that emphasize the fact that the permanent market monitoring and the continuous adaptation of it will become necessary for the next period. The current client is more demanding, more educated and less tolerant in the relation to the suppliers of any kind and especially with those of financial services. The tendency to use co-branded cards for everyday payments will increase as merchants and issuing banks will attach more and more benefits on these cards, which will ultimately increase trading volumes on the card to merchants. The bank clients benefited of the cutting - edge technologies, of dual cards functionality - debit and credit.

  14. Smart power router : a flexible agent-based converter interface in active distribution networks

    NARCIS (Netherlands)

    Nguyen, P.H.; Kling, W.L.; Ribeiro, P.F.

    2011-01-01

    Due to the large-scale implementation of distributed generation, the power delivery system is changing gradually from a "vertically" to a "horizontally" controlled and operated structure. This transition has prompted the emergence of the active distribution network (ADN) concept as an efficient and

  15. Improvement of computer complex and interface system for compact nuclear simulator

    International Nuclear Information System (INIS)

    Lee, D. Y.; Park, W. M.; Cha, K. H.; Jung, C. H.; Park, J. C.

    1999-01-01

    CNS(Compact Nuclear Simulator) was developed at the end of 1980s, and have been used as training simulator for staffs of KAERI during 10 years. The operator panel interface cards and the graphic interface cards were designed with special purpose only for CNS. As these interface cards were worn out for 10 years, it was very difficult to get spare parts and to repair them. And the interface cards were damaged by over current happened by shortage of lamp in the operator panel. To solve these problem, the project 'Improvement of Compact Nuclear Simulator' was started from 1997. This paper only introduces about the improvement of computer complex and interface system

  16. A credit card verifier structure using diffraction and spectroscopy concepts

    Science.gov (United States)

    Sumriddetchkajorn, Sarun; Intaravanne, Yuttana

    2008-04-01

    We propose and experimentally demonstrate an angle-multiplexing based optical structure for verifying a credit card. Our key idea comes from the fact that the fine detail of the embossed hologram stamped on the credit card is hard to duplicate and therefore its key color features can be used for distinguishing between the real and counterfeit ones. As the embossed hologram is a diffractive optical element, we choose to shine one at a time a number of broadband lightsources, each at different incident angle, on the embossed hologram of the credit card in such a way that different color spectra per incident angle beam is diffracted and separated in space. In this way, the number of pixels of each color plane is investigated. Then we apply a feed forward back propagation neural network configuration to separate the counterfeit credit card from the real one. Our experimental demonstration using two off-the-shelf broadband white light emitting diodes, one digital camera, a 3-layer neural network, and a notebook computer can identify all 69 counterfeit credit cards from eight real credit cards.

  17. Design of a motion JPEG (M/JPEG) adapter card

    Science.gov (United States)

    Lee, D. H.; Sudharsanan, Subramania I.

    1994-05-01

    In this paper we describe a design of a high performance JPEG (Joint Photographic Experts Group) Micro Channel adapter card. The card, tested on a range of PS/2 platforms (models 50 to 95), can complete JPEG operations on a 640 by 240 pixel image within 1/60 of a second, thus enabling real-time capture and display of high quality digital video. The card accepts digital pixels for either a YUV 4:2:2 or an RGB 4:4:4 pixel bus and has been shown to handle up to 2.05 MBytes/second of compressed data. The compressed data is transmitted to a host memory area by Direct Memory Access operations. The card uses a single C-Cube's CL550 JPEG processor that complies with the baseline JPEG. We give broad descriptions of the hardware that controls the video interface, CL550, and the system interface. Some critical design points that enhance the overall performance of the M/JPEG systems are pointed out. The control of the adapter card is achieved by an interrupt driven software that runs under DOS. The software performs a variety of tasks that include change of color space (RGB or YUV), change of quantization and Huffman tables, odd and even field control and some diagnostic operations.

  18. A Mechanism for Anonymous Credit Card Systems

    Science.gov (United States)

    Tamura, Shinsuke; Yanase, Tatsuro

    This paper proposes a mechanism for anonymous credit card systems, in which each credit card holder can conceal individual transactions from the credit card company, while enabling the credit card company to calculate the total expenditures of transactions of individual card holders during specified periods, and to identify card holders who executed dishonest transactions. Based on three existing mechanisms, i.e. anonymous authentication, blind signature and secure statistical data gathering, together with implicit transaction links proposed here, the proposed mechanism enables development of anonymous credit card systems without assuming any absolutely trustworthy entity like tamper resistant devices or organizations faithful both to the credit card company and card holders.

  19. DIABCARD a smart card for patients with chronic diseases.

    Science.gov (United States)

    Engelbrecht, R; Hildebrand, C

    1997-01-01

    Within the European Union-sponsored project DIABCARD, the core of a chip-card-based medical information system for patients with chronic diseases, exemplified on diabetes mellitus, has been developed. The long-term goal of the project is to improve the medical record and the quality of care for patients with chronic diseases. The basic idea is to have a portable electronic medical record on a smart card. This will improve the communication between the different healthcare personnel and between different institutions and, at the same time, promote shared care. The DIABCARD chip-card-based medical information system will offer controlled access to the necessary and up-to-date patient record to everyone involved in the patient's treatment, and it will help reduce the constantly rising healthcare expenditure. The system first was implemented in a small version. The system architecture contains hardware, software, and orgware. It considers especially the memory of the chip card, the processor, the data structure, security functions, the operating system on the chip card, the interface between the chip card and the application, and various application areas. The DIABCARD dataset was defined via an information model, which describes the different communication processes, via acknowledged diabetes datasets and medical scenarios. It includes, among others, emergency data, data for quality assurance, and data for blood glucose self-monitoring. The first prototype has been developed, and a pilot was run for 3 months.

  20. Broadband network on-line data acquisition system with web based interface for control and basic analysis

    Science.gov (United States)

    Polkowski, Marcin; Grad, Marek

    2016-04-01

    Passive seismic experiment "13BB Star" is operated since mid 2013 in northern Poland and consists of 13 broadband seismic stations. One of the elements of this experiment is dedicated on-line data acquisition system comprised of both client (station) side and server side modules with web based interface that allows monitoring of network status and provides tools for preliminary data analysis. Station side is controlled by ARM Linux board that is programmed to maintain 3G/EDGE internet connection, receive data from digitizer, send data do central server among with additional auxiliary parameters like temperatures, voltages and electric current measurements. Station side is controlled by set of easy to install PHP scripts. Data is transmitted securely over SSH protocol to central server. Central server is a dedicated Linux based machine. Its duty is receiving and processing all data from all stations including auxiliary parameters. Server side software is written in PHP and Python. Additionally, it allows remote station configuration and provides web based interface for user friendly interaction. All collected data can be displayed for each day and station. It also allows manual creation of event oriented plots with different filtering abilities and provides numerous status and statistic information. Our solution is very flexible and easy to modify. In this presentation we would like to share our solution and experience. National Science Centre Poland provided financial support for this work via NCN grant DEC-2011/02/A/ST10/00284.

  1. Stream processing health card application.

    Science.gov (United States)

    Polat, Seda; Gündem, Taflan Imre

    2012-10-01

    In this paper, we propose a data stream management system embedded to a smart card for handling and storing user specific summaries of streaming data coming from medical sensor measurements and/or other medical measurements. The data stream management system that we propose for a health card can handle the stream data rates of commonly known medical devices and sensors. It incorporates a type of context awareness feature that acts according to user specific information. The proposed system is cheap and provides security for private data by enhancing the capabilities of smart health cards. The stream data management system is tested on a real smart card using both synthetic and real data.

  2. FELIX: The New Approach for Interfacing to Front-end Electronics for the ATLAS Experiment

    CERN Document Server

    AUTHOR|(SzGeCERN)754725; The ATLAS collaboration; Anderson, John Thomas; Borga, Andrea; Boterenbrood, Hendrik; Chen, Hucheng; Chen, Kai; Drake, Gary; Donszelmann, Mark; Francis, David; Gorini, Benedetto; Guest, Daniel; Lanni, Francesco; Lehmann Miotto, Giovanna; Levinson, Lorne; Roich, Alexander; Schreuder, Frans Philip; Schumacher, J\\"orn; Vandelli, Wainer; Zhang, Jinlong

    2016-01-01

    From the ATLAS Phase-I upgrade and onward, new or upgraded detectors and trigger systems will be interfaced to the data acquisition, detector control and timing (TTC) systems by the Front-End Link eXchange (FELIX). FELIX is the core of the new ATLAS Trigger/DAQ architecture. Functioning as a router between custom serial links and a commodity network, FELIX is implemented by server PCs with commodity network interfaces and PCIe cards with large FPGAs and many high speed serial fiber transceivers. By separating data transport from data manipulation, the latter can be done by software in commodity servers attached to the network. Replacing traditional point-to-point links between Front-end components and the DAQ system by a switched network, FELIX provides scaling, flexibility uniformity and upgradability and reduces the diversity of custom hardware solutions in favour of software.

  3. Investigation into Plastic Cards

    Directory of Open Access Journals (Sweden)

    Neringa Stašelytė

    2015-03-01

    Full Text Available The article examines the strength of laminating plastic cards at different lamination temperatures. For investigation purposes, two types of plastic substrate and films have been used. Laminate strength has been tested (CMYK to establish the impact of colours on the strength of laminate. The paper compares inks supplied by two different producers. The colour characteristics of CIE L*a*b* space before and after the lamination process have been found. According to lamination strength and characteristics of the colours, the most suitable inks, temperature and films have been chosen.

  4. Probabilities in the Card Game of Three Cards

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 9; Issue 3. Probabilities in the Card Game of Three Cards. A W Joshi M W Joshi. Classroom Volume 9 Issue 3 March 2004 pp 76-77. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/009/03/0076-0077 ...

  5. Interfacing Space Communications and Navigation Network Simulation with Distributed System Integration Laboratories (DSIL)

    Science.gov (United States)

    Jennings, Esther H.; Nguyen, Sam P.; Wang, Shin-Ywan; Woo, Simon S.

    2008-01-01

    NASA's planned Lunar missions will involve multiple NASA centers where each participating center has a specific role and specialization. In this vision, the Constellation program (CxP)'s Distributed System Integration Laboratories (DSIL) architecture consist of multiple System Integration Labs (SILs), with simulators, emulators, testlabs and control centers interacting with each other over a broadband network to perform test and verification for mission scenarios. To support the end-to-end simulation and emulation effort of NASA' exploration initiatives, different NASA centers are interconnected to participate in distributed simulations. Currently, DSIL has interconnections among the following NASA centers: Johnson Space Center (JSC), Kennedy Space Center (KSC), Marshall Space Flight Center (MSFC) and Jet Propulsion Laboratory (JPL). Through interconnections and interactions among different NASA centers, critical resources and data can be shared, while independent simulations can be performed simultaneously at different NASA locations, to effectively utilize the simulation and emulation capabilities at each center. Furthermore, the development of DSIL can maximally leverage the existing project simulation and testing plans. In this work, we describe the specific role and development activities at JPL for Space Communications and Navigation Network (SCaN) simulator using the Multi-mission Advanced Communications Hybrid Environment for Test and Evaluation (MACHETE) tool to simulate communications effects among mission assets. Using MACHETE, different space network configurations among spacecrafts and ground systems of various parameter sets can be simulated. Data that is necessary for tracking, navigation, and guidance of spacecrafts such as Crew Exploration Vehicle (CEV), Crew Launch Vehicle (CLV), and Lunar Relay Satellite (LRS) and orbit calculation data are disseminated to different NASA centers and updated periodically using the High Level Architecture (HLA). In

  6. Interfacing Hardware Accelerators to a Time-Division Multiplexing Network-on-Chip

    DEFF Research Database (Denmark)

    Pezzarossa, Luca; Sørensen, Rasmus Bo; Schoeberl, Martin

    2015-01-01

    This paper addresses the integration of stateless hardware accelerators into time-predictable multi-core platforms based on time-division multiplexing networks-on-chip. Stateless hardware accelerators, like floating-point units, are typically attached as co-processors to individual processors in ...... implementation. The design evaluation is carried out using the open source T-CREST multi-core platform implemented on an Altera Cyclone IV FPGA. The size of the proposed design, including a floating-point accelerator, is about two-thirds of a processor....

  7. Performance Evaluation of a Prototyped Wireless Ground Sensor Network

    Science.gov (United States)

    2005-03-01

    gateways. The MIB510 and MIB600 gateways require direct in- terface with a personal computer. The Stargate gateway is capable of remote interface using... Stargate gateway allows for remote access via IEEE 802.11 PCMCIA slot or by connection to a GSM/CDMA cell phone network. This gateway employs LinuxOS. The... Stargate provides increased processing power and has expansion slots for additional memory, a PCMCIA card, and for an 802.15.4 transceiver. The Stargate

  8. British and American attitudes toward credit cards.

    Science.gov (United States)

    Yang, Bijou; James, Simon; Lester, David

    2006-04-01

    American university students owned more than twice as many credit cards as British university students. However, scores on a credit card attitude scale predicted the number of cards owned by respondents in both countries.

  9. FELIX: A high-throughput network approach for interfacing to front end electronics for ATLAS upgrades

    CERN Document Server

    Anderson, John Thomas; The ATLAS collaboration; Boterenbrood, Hendrik; Chen, Hucheng; Chen, Kai; Drake, Gary; Francis, David; Gorini, Benedetto; Lanni, Francesco; Lehmann Miotto, Giovanna; Levinson, Lorne; Narevicius, Julia; Christian Plessl; Roich, Alexander; Schreuder, Frans Philip; Schumacher, Jorn; Vandelli, Wainer; Vermeulen, Jos; Zhang, Jinlong

    2015-01-01

    The ATLAS experiment at CERN is planning full deployment of a new unified link technology for connecting detector front end electronics on the timescale of the LHC Run 4 (2025). It is estimated that roughly 8000 GBT (GigaBit Transceiver) links, with transfer rates probably up to 9.6 Gbps, will replace existing links used for readout, detector control and distribution of timing and trigger information. In particular the links used for readout are often detector-specific. Already in Run 3 this technology will be deployed in conjunction with new muon detectors, additional muon first-level triggering electronics and new on-detector and off-detector liquid argon calorimeter electronics to be used for first level triggering. A total of roughly 2000 GBT links or GBT-like links (for connecting to off-detector trigger electronics) will be needed. A new class of devices will need to be developed to interface many GBT links to the rest of the trigger, data-acquisition and detector control systems. In this paper we prese...

  10. ROS-IGTL-Bridge: an open network interface for image-guided therapy using the ROS environment.

    Science.gov (United States)

    Frank, Tobias; Krieger, Axel; Leonard, Simon; Patel, Niravkumar A; Tokuda, Junichi

    2017-08-01

    With the growing interest in advanced image-guidance for surgical robot systems, rapid integration and testing of robotic devices and medical image computing software are becoming essential in the research and development. Maximizing the use of existing engineering resources built on widely accepted platforms in different fields, such as robot operating system (ROS) in robotics and 3D Slicer in medical image computing could simplify these tasks. We propose a new open network bridge interface integrated in ROS to ensure seamless cross-platform data sharing. A ROS node named ROS-IGTL-Bridge was implemented. It establishes a TCP/IP network connection between the ROS environment and external medical image computing software using the OpenIGTLink protocol. The node exports ROS messages to the external software over the network and vice versa simultaneously, allowing seamless and transparent data sharing between the ROS-based devices and the medical image computing platforms. Performance tests demonstrated that the bridge could stream transforms, strings, points, and images at 30 fps in both directions successfully. The data transfer latency was bridge could achieve 900 fps for transforms. Additionally, the bridge was demonstrated in two representative systems: a mock image-guided surgical robot setup consisting of 3D slicer, and Lego Mindstorms with ROS as a prototyping and educational platform for IGT research; and the smart tissue autonomous robot surgical setup with 3D Slicer. The study demonstrated that the bridge enabled cross-platform data sharing between ROS and medical image computing software. This will allow rapid and seamless integration of advanced image-based planning/navigation offered by the medical image computing software such as 3D Slicer into ROS-based surgical robot systems.

  11. Authentication techniques for smart cards

    International Nuclear Information System (INIS)

    Nelson, R.A.

    1994-02-01

    Smart card systems are most cost efficient when implemented as a distributed system, which is a system without central host interaction or a local database of card numbers for verifying transaction approval. A distributed system, as such, presents special card and user authentication problems. Fortunately, smart cards offer processing capabilities that provide solutions to authentication problems, provided the system is designed with proper data integrity measures. Smart card systems maintain data integrity through a security design that controls data sources and limits data changes. A good security design is usually a result of a system analysis that provides a thorough understanding of the application needs. Once designers understand the application, they may specify authentication techniques that mitigate the risk of system compromise or failure. Current authentication techniques include cryptography, passwords, challenge/response protocols, and biometrics. The security design includes these techniques to help prevent counterfeit cards, unauthorized use, or information compromise. This paper discusses card authentication and user identity techniques that enhance security for microprocessor card systems. It also describes the analysis process used for determining proper authentication techniques for a system

  12. It's All in the Cards.

    Science.gov (United States)

    Burke, Jim

    2002-01-01

    Describes how the author learned by watching low-achieving students play intricate card games such as "Magic" that they can learn, can remember, and certainly can master information. Realizes that these cards were advanced learning tools, multifaceted texts using color, symbols, images, texts, and metaphor to help create a world of…

  13. Smart Cards and remote entrusting

    Science.gov (United States)

    Aussel, Jean-Daniel; D'Annoville, Jerome; Castillo, Laurent; Durand, Stephane; Fabre, Thierry; Lu, Karen; Ali, Asad

    Smart cards are widely used to provide security in end-to-end communication involving servers and a variety of terminals, including mobile handsets or payment terminals. Sometime, end-to-end server to smart card security is not applicable, and smart cards must communicate directly with an application executing on a terminal, like a personal computer, without communicating with a server. In this case, the smart card must somehow trust the terminal application before performing some secure operation it was designed for. This paper presents a novel method to remotely trust a terminal application from the smart card. For terminals such as personal computers, this method is based on an advanced secure device connected through the USB and consisting of a smart card bundled with flash memory. This device, or USB dongle, can be used in the context of remote untrusting to secure portable applications conveyed in the dongle flash memory. White-box cryptography is used to set the secure channel and a mechanism based on thumbprint is described to provide external authentication when session keys need to be renewed. Although not as secure as end-to-end server to smart card security, remote entrusting with smart cards is easy to deploy for mass-market applications and can provide a reasonable level of security.

  14. Louisiana coastal GIS network: Graphical user interface for access to spatial data

    Science.gov (United States)

    Hiland, Matteson; McBride, Randolph A.; Davis, Donald; Braud, Dewitt; Streiffer, Henry; Jones, Farrell; Lewis, Anthony; Williams, S.

    1991-01-01

    Louisiana's coastal wetlands support a large percentage of the nation's seafood and fur industries, vast deposits of oil and natural gas, habitat for thousands of species of plants and animals, winter nesting grounds and migratory paths for numerous waterfowl, and many recreational resources enjoyed by residents and tourists. Louisiana's wetlands also have the highest rates of coastal erosion and wetland loss in the nation. While numerous studies across many disciplines have been conducted on both local and regional scales, no complete inventory exists for this information. The Louisiana Coastal Geographic Information System Network (LCGISN) is currently being developed to facilitate access to existing data for coastal zone planners, managers, and researchers. The Louisiana Geological Survey (LGS), in cooperation with the LSU Department of Geography and Anthropology, the Computer Aided Design and Geographic Information Systems Research Laboratory (CADGIS), and others, is pursuing this project under the terms of a cooperative agreement with the U.S. Geological Survey. LCGISN is an automated system for searching and retrieving geographic, cartographic, and bibliographic data. By linking original programming with an existing GIS software package and an industry standard relational database management system, LCGISN will provide the capability for users to search for data references by interactively defining the area of interest on a displayed map/image reference background. Several agencies will be networked to provide easy access to a wide variety of information. LCGISN, with its headquarters at LGS, will serve as the central node on the network, providing data format conversions, projection and datum transformations, and storage of several of the most commonly used data sets. Thematic mapper data, USGS 7.5-minute quadrangle map boundaries, political and legal boundaries, major transportation routes, and other digital data will provide a base map to aid the user in

  15. Interfacing a biosurveillance portal and an international network of institutional analysts to detect biological threats.

    Science.gov (United States)

    Riccardo, Flavia; Shigematsu, Mika; Chow, Catherine; McKnight, C Jason; Linge, Jens; Doherty, Brian; Dente, Maria Grazia; Declich, Silvia; Barker, Mike; Barboza, Philippe; Vaillant, Laetitia; Donachie, Alastair; Mawudeku, Abla; Blench, Michael; Arthur, Ray

    2014-01-01

    The Early Alerting and Reporting (EAR) project, launched in 2008, is aimed at improving global early alerting and risk assessment and evaluating the feasibility and opportunity of integrating the analysis of biological, chemical, radionuclear (CBRN), and pandemic influenza threats. At a time when no international collaborations existed in the field of event-based surveillance, EAR's innovative approach involved both epidemic intelligence experts and internet-based biosurveillance system providers in the framework of an international collaboration called the Global Health Security Initiative, which involved the ministries of health of the G7 countries and Mexico, the World Health Organization, and the European Commission. The EAR project pooled data from 7 major internet-based biosurveillance systems onto a common portal that was progressively optimized for biological threat detection under the guidance of epidemic intelligence experts from public health institutions in Canada, the European Centre for Disease Prevention and Control, France, Germany, Italy, Japan, the United Kingdom, and the United States. The group became the first end users of the EAR portal, constituting a network of analysts working with a common standard operating procedure and risk assessment tools on a rotation basis to constantly screen and assess public information on the web for events that could suggest an intentional release of biological agents. Following the first 2-year pilot phase, the EAR project was tested in its capacity to monitor biological threats, proving that its working model was feasible and demonstrating the high commitment of the countries and international institutions involved. During the testing period, analysts using the EAR platform did not miss intentional events of a biological nature and did not issue false alarms. Through the findings of this initial assessment, this article provides insights into how the field of epidemic intelligence can advance through an

  16. Level-1 Data Driver Card of the ATLAS New Small Wheel upgrade compatible with the Phase II 1 MHz readout scheme

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00549793; The ATLAS collaboration

    2016-01-01

    The Level-1 Data Driver Card (L1DDC) will be designed for the needs of the future upgrades of the innermost stations of the ATLAS end-cap muon spectrometer. The L1DDC is a high speed aggregator board capable of communicating with a large number of front-end electronics. It collects the Level-1 data along with monitoring data and transmits them to a network interface through a single bidirectional fiber link. In addition, the L1DDC board distributes trigger, time and configuration data coming from the network interface to the front-end boards. The L1DDC is fully compatible with the Phase II upgrade where the trigger rate is expected to reach 1 MHz. This paper describes the overall scheme of the data acquisition process and especially the three different L1DDC boards that will be fabricated. Moreover the L1DDC prototype-1 is also described.

  17. Informing the network: Improving communication with interface communities during wildland fire

    Science.gov (United States)

    Taylor, J.G.; Gillette, S.C.; Hodgson, R.W.; Downing, J.L.; Burns, M.R.; Chavez, D.J.; Hogan, J.T.

    2007-01-01

    An interagency research team studied fire communications that took place during different stages of two wildfires in southern California: one small fire of short duration and one large fire of long duration. This "quick- response" research showed that pre-fire communication planning was particularly effective for smaller fire events and parts of that planning proved invaluable for the large fire event as well. Information seeking by the affected public relied on locally convenient sources during the small fire. During the large fire, widespread evacuations disrupted many of the local informal communication networks. Residents' needs were for "real-time, " place-specific information: precise location, severity, size, and direction of spread of the fires. Fire management agencies must contribute real-time, place-specific fire information when it is most needed by the affected public, as they try to make sense out of the chaos of a wildland fire. Disseminating fire information as broadly as possible through multiple pathways will maximize the probability of the public finding the information they need. ?? Society for Human Ecology.

  18. INTERFACING VISIBLE LIGHT COMMUNICATION WITH GSM NETWORKS TO PREVENT THE THEFT OF THE VEHICLE

    Directory of Open Access Journals (Sweden)

    P. Prabu

    2015-09-01

    Full Text Available Visible Light Communication (VLC by means of white Light Emitting Diode (LED is an alternate and most promising technology for existing Radio Frequency (RF communication. We proposed one of the important applications of VLC to prevent the theft of the vehicle. Every year approximately 36,000 vehicles worth Rs.115 crores are stolen in India. In critical road condition, only 15,000 are traced and many spare parts of vehicle are found missing. Even the existing technologies have some disadvantages related to the problem stated. In our paper, we dealt with the data communication through LED. One of the optical wireless communication having short range is called as VLC whose visible light spectrum starts from 380 nm and ends at 780 nm and it has an incomparable data rate of 10GB/s whereas the speed is 1MB/s on Bluetooth and for Infra Red (IR the speed is 4MB/s. We try to achieve the communication through VLC between 1 car - car to prevent the accident and 2 car - tollgate and received signal from tollgate is transmitted to Global System for Mobile communication (GSM network using microcontroller to prevent the theft of vehicle. To enhance the security of VLC, Advanced Encryption Standard (AES algorithm is used and the result is illustrated with the help of LabVIEW.

  19. Approaches in highly parameterized inversion-PESTCommander, a graphical user interface for file and run management across networks

    Science.gov (United States)

    Karanovic, Marinko; Muffels, Christopher T.; Tonkin, Matthew J.; Hunt, Randall J.

    2012-01-01

    Models of environmental systems have become increasingly complex, incorporating increasingly large numbers of parameters in an effort to represent physical processes on a scale approaching that at which they occur in nature. Consequently, the inverse problem of parameter estimation (specifically, model calibration) and subsequent uncertainty analysis have become increasingly computation-intensive endeavors. Fortunately, advances in computing have made computational power equivalent to that of dozens to hundreds of desktop computers accessible through a variety of alternate means: modelers have various possibilities, ranging from traditional Local Area Networks (LANs) to cloud computing. Commonly used parameter estimation software is well suited to take advantage of the availability of such increased computing power. Unfortunately, logistical issues become increasingly important as an increasing number and variety of computers are brought to bear on the inverse problem. To facilitate efficient access to disparate computer resources, the PESTCommander program documented herein has been developed to provide a Graphical User Interface (GUI) that facilitates the management of model files ("file management") and remote launching and termination of "slave" computers across a distributed network of computers ("run management"). In version 1.0 described here, PESTCommander can access and ascertain resources across traditional Windows LANs: however, the architecture of PESTCommander has been developed with the intent that future releases will be able to access computing resources (1) via trusted domains established in Wide Area Networks (WANs) in multiple remote locations and (2) via heterogeneous networks of Windows- and Unix-based operating systems. The design of PESTCommander also makes it suitable for extension to other computational resources, such as those that are available via cloud computing. Version 1.0 of PESTCommander was developed primarily to work with the

  20. Implementing Smart Cards into the Air Force Reserve

    National Research Council Canada - National Science Library

    McClannan, Keith

    2002-01-01

    Smart card technology is essentially about a credit card with a brain, Smart cards have an embedded microchip that allows the card to hold digital data up to the available memory installed on the card...

  1. Implementing Smart Cards into the Air Force Reserve

    National Research Council Canada - National Science Library

    McClannan, Keith

    2001-01-01

    Smart card technology is essentially about a credit card with a brain. Smart cards have an embedded microchip that allows the card to hold digital data up to the available memory installed on the card...

  2. 2D-HB-Network at the air-water interface: A structural and dynamical characterization by means of ab initio and classical molecular dynamics simulations

    Science.gov (United States)

    Pezzotti, Simone; Serva, Alessandra; Gaigeot, Marie-Pierre

    2018-05-01

    Following our previous work where the existence of a special 2-Dimensional H-Bond (2D-HB)-Network was revealed at the air-water interface [S. Pezzotti et al., J. Phys. Chem. Lett. 8, 3133 (2017)], we provide here a full structural and dynamical characterization of this specific arrangement by means of both Density Functional Theory based and Force Field based molecular dynamics simulations. We show in particular that water at the interface with air reconstructs to maximize H-Bonds formed between interfacial molecules, which leads to the formation of an extended and non-interrupted 2-Dimensional H-Bond structure involving on average ˜90% of water molecules at the interface. We also show that the existence of such an extended structure, composed of H-Bonds all oriented parallel to the surface, constrains the reorientional dynamics of water that is hence slower at the interface than in the bulk. The structure and dynamics of the 2D-HB-Network provide new elements to possibly rationalize several specific properties of the air-water interface, such as water surface tension, anisotropic reorientation of interfacial water under an external field, and proton hopping.

  3. Digitizing Olin Eggen's Card Database

    Science.gov (United States)

    Crast, J.; Silvis, G.

    2017-06-01

    The goal of the Eggen Card Database Project is to recover as many of the photometric observations from Olin Eggen's Card Database as possible and preserve these observations, in digital forms that are accessible by anyone. Any observations of interest to the AAVSO will be added to the AAVSO International Database (AID). Given to the AAVSO on long-term loan by the Cerro Tololo Inter-American Observatory, the database is a collection of over 78,000 index cards holding all Eggen's observations made between 1960 and 1990. The cards were electronically scanned and the resulting 108,000 card images have been published as a series of 2,216 PDF files, which are available from the AAVSO web site. The same images are also stored in an AAVSO online database where they are indexed by star name and card content. These images can be viewed using the eggen card portal online tool. Eggen made observations using filter bands from five different photometric systems. He documented these observations using 15 different data recording formats. Each format represents a combination of filter magnitudes and color indexes. These observations are being transcribed onto spreadsheets, from which observations of value to the AAVSO are added to the AID. A total of 506 U, B, V, R, and I observations were added to the AID for the variable stars S Car and l Car. We would like the reader to search through the card database using the eggen card portal for stars of particular interest. If such stars are found and retrieval of the observations is desired, e-mail the authors, and we will be happy to help retrieve those data for the reader.

  4. Protein interaction networks at the host-microbe interface in Diaphorina citri, the insect vector of the citrus greening pathogen.

    Science.gov (United States)

    Ramsey, J S; Chavez, J D; Johnson, R; Hosseinzadeh, S; Mahoney, J E; Mohr, J P; Robison, F; Zhong, X; Hall, D G; MacCoss, M; Bruce, J; Cilia, M

    2017-02-01

    The Asian citrus psyllid ( Diaphorina citri) is the insect vector responsible for the worldwide spread of ' Candidatus Liberibacter asiaticus' (CLas), the bacterial pathogen associated with citrus greening disease. Developmental changes in the insect vector impact pathogen transmission, such that D. citri transmission of CLas is more efficient when bacteria are acquired by nymphs when compared with adults. We hypothesize that expression changes in the D. citri immune system and commensal microbiota occur during development and regulate vector competency. In support of this hypothesis, more proteins, with greater fold changes, were differentially expressed in response to CLas in adults when compared with nymphs, including insect proteins involved in bacterial adhesion and immunity. Compared with nymphs, adult insects had a higher titre of CLas and the bacterial endosymbionts Wolbachia, Profftella and Carsonella. All Wolbachia and Profftella proteins differentially expressed between nymphs and adults are upregulated in adults, while most differentially expressed Carsonella proteins are upregulated in nymphs. Discovery of protein interaction networks has broad applicability to the study of host-microbe relationships. Using protein interaction reporter technology, a D. citri haemocyanin protein highly upregulated in response to CLas was found to physically interact with the CLas coenzyme A (CoA) biosynthesis enzyme phosphopantothenoylcysteine synthetase/decarboxylase. CLas pantothenate kinase, which catalyses the rate-limiting step of CoA biosynthesis, was found to interact with a D. citri myosin protein. Two Carsonella enzymes involved in histidine and tryptophan biosynthesis were found to physically interact with D. citri proteins. These co-evolved protein interaction networks at the host-microbe interface are highly specific targets for controlling the insect vector responsible for the spread of citrus greening.

  5. The c-cards game

    DEFF Research Database (Denmark)

    Valente, Andrea

    2005-01-01

    C-cards are an easy-to-reify, graphical formalism capable of expressing computational systems, discrete both in time and in space. The main goal of the project aims at scaling-down the learning complexity of Computer Science core contents. We argue that our cards present many dimensions...... of flexibility, resulting in a highly customizable learning object, that gives teachers and pedagogues freedom with respect to reification and deployment strategies. The correlation between the c-cards game and children's soft skills is also discussed....

  6. From EuCARD to EuCARD-2

    CERN Multimedia

    Chaudron, M

    2013-01-01

    The one word that best describes the spirit of the EuCARD ’13 event (see here) that took place from 10 to 14 June at CERN is "collaboration". The event brought together more than 180 accelerator specialists from all over the world to celebrate the conclusion of the EuCARD project and to kick off its successor, EuCARD-2.   EuCARD-2 brings a global view to particle accelerator research in order to address challenges for future generations of accelerators. The project officially began on 1 May 2013 and will run for four years. With a total budget of €23.4 million, including an €8 million EU contribution, it will build upon the success of EuCARD and push it into an even more innovative regime. EuCARD-2 aims to significantly enhance multidisciplinary R&D for European accelerators and will actively contribute to the development of a European Research Area in accelerator science. This will be accomplished by promoting complementary expertise, cross-d...

  7. Credit Cards. Bulletin No. 721. (Revised.)

    Science.gov (United States)

    Fox, Linda Kirk

    This cooperative extension bulletin provides basic information about credit cards and their use. It covers the following topics: types of credit cards (revolving credit, travel and entertainment, and debit); factors to consider when evaluating a credit card (interest rates, grace period, and annual membership fee); other credit card costs (late…

  8. 75 FR 10414 - Researcher Identification Card

    Science.gov (United States)

    2010-03-08

    ... capturing administrative information on the characteristics of our users. Other forms of identification are... use bar-codes on researcher identification cards in the Washington, DC, area. The plastic cards we... plastic researcher identification cards as part of their security systems, we issue a plastic card to...

  9. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    Division des Ressources Humaines; Human Resources Division; Tel. 79494-74683

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDS due to expire during the year 2000, need to change them. Those concerned should bring: - a recent passport photo (with NAME and first name on the back) - the expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to: Bureau des cartes, bldg 33.1-009/1-011. HR Division will notify members of personnel as soon as the new cards are available.Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organisation will not take any responsibility in case of difficulties with the customs authorities or the police.

  10. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    Division des Ressources Humaines; Human Resources Division; Tel. 79494-74683

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDS due to expire during the year 2000, need to change them. Those concerned should bring : a recent passport photo (with NAME and first name on the back) the expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication)to: Bureau des cartes, Bât 33.1-009/1-011. Members of personnel will be notified by HR Division as soon as the new cards are available. Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organization will not take any responsibility in case of difficulties with the customs authorities or the police.

  11. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    Human Resources Division; Human Resources Division; Tel. 79494-74683

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDS due to expire during the year 2000, need to change them. Those concerned should bring: ­ a recent passport photo (with NAME and first name on the back) ­ the expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to: Bureau des cartes, Bât 33.1-009/1-011 Members of the personnel will be notified by HR Division as soon as the new cards are available. Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organization will not take any responsability in case of difficulties with the customs authorities or the police.

  12. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    HR Division

    2001-01-01

    Members of the personnel and their families, holders of SWISS LEGITIMATION CARDS due to expire during the year 2001, need to change them. Those concerned should bring : a recent passport photo (with NAME and first name on the back) the expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to Bureau des cartes, building 33/1-009/1-015. Members of the personnel will be notified by the Social and Statutary Conditions Group, HR Division as soon as the new cards are available. Be careful: If you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organization will not take any responsibility in case of difficulties with the customs authorities or the police.

  13. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    Division des Ressources Humaines; Human Resources Division; Tel. 79494-74683

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDS due to expire during the year 2000, need to change them. Those concerned should bring : - a recent passport photo (with NAME and first name on the back) - the expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to: Bureau des cartes, bât 33.1-009/1-011. HR Division will notify members of personnel as soon as the new cards are available. Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organization will not take any responsibility in case of difficulties with the customs authorities or the police.

  14. [Smart cards in health services].

    Science.gov (United States)

    Rienhoff, O

    2001-10-01

    Since the early 1980-ties it has been tried to utilise smart cards in health care. All industrialised countries participated in those efforts. The most sustainable analyses took place in Europe--specifically in the United Kingdom, France, and Germany. The first systems installed (the service access cards in F and G, the Health Professional Card in F) are already conceptionally outdated today. The senior understanding of the great importance of smart cards for security of electronic communication in health care does contrast to a hesitating behaviour of the key players in health care and health politics in Germany. There are clear hints that this may relate to the low informatics knowledge of current senior management.

  15. Turning a Private Label Bank Card into a Multi-function Campus ID Card.

    Science.gov (United States)

    James, Thomas G.; Norwood, Bill R.

    1991-01-01

    This article describes the development at Florida State University of the Seminole ACCESS card, which functions simultaneously as a bank automated teller machine card, a student identification card, and a debit card. Explained are the partnership between the university and the bank charge card center, funding system, technologies involved, and…

  16. Level-1 Data Driver Card - A high bandwidth radiation tolerant aggregator board for detectors

    CERN Document Server

    Gkountoumis, Panagiotis; The ATLAS collaboration

    2017-01-01

    The Level-1 Data Driver Card (L1DDC) was designed for the needs of the future upgrades of the innermost stations of the ATLAS end-cap muon spectrometer. The L1DDC is a high speed aggregator board capable of communicating with multiple front-end electronic boards. It collects the Level-1 data along with monitoring data and transmits them to a network interface through bidirectional and/or unidirectional fiber links at 4.8 Gbps each. In addition, the L1DDC board distributes trigger, time and configuration data coming from the network interface to the front-end boards. The L1DDC is fully compatible with the Phase II upgrade where the trigger rate is expected to reach the 1 MHz. Three different types of L1DDC boards will be fabricated handling up to 10.080 Gbps of user data. It consist of custom made radiation tolerant ASICs: the GigaBit Transceiver (GBTx), the FEAST DC-DC converter, the Slow Control Adapter (SCA), and the Versatile Tranceivers (VTRX) and transmitters (VTTX). The overall scheme of the data acquis...

  17. Reconfigurable PCI Express cards for low-latency data transport in HEP experiments

    International Nuclear Information System (INIS)

    Ammendola, R.; Biagioni, A.; Cretaro, P.; Frezza, O.; Lo Cicero, F.; Lonardo, A.; Martinelli, M.; Paolucci, P.S.; Pastorelli, E.; Simula, F.; Vicini, P.; Lamanna, G.; Pontisso, L.

    2017-01-01

    State-of-the-art technology supports the High Energy Physics community in addressing the problem of managing an overwhelming amount of experimental data. From the point of view of communication between the detectors’ readout system and computing nodes, the critical issues are the following: latency, moving data in a deterministic and low amount of time; bandwidth, guaranteeing the maximum capability of the link and communication protocol adopted; endpoint consolidation, tight aggregation of channels on a single board. This contribution describes the status and performances of the NaNet project, whose goal is the design of a family of FPGA-based PCIe network interface cards. The efforts of the team are focused on implementing a low-latency, real-time data transport mechanism between the board network multi-channel system and CPU and GPU accelerators memories on the host. Several opportunities concerning technical solutions and scientific applications have been explored: NaNet-1 with a single GbE I/O interface, and NaNet-10, offering four 10GbE ports, for activities related to the GPU-based real-time trigger of NA62 experiment at CERN; NaNet"3, with four 2.5 Gbit optical channels, developed for the KM3NeT-ITALIA underwater neutrino telescope.

  18. Reconfigurable PCI Express cards for low-latency data transport in HEP experiments

    Science.gov (United States)

    Ammendola, R.; Biagioni, A.; Cretaro, P.; Frezza, O.; Lamanna, G.; Lo Cicero, F.; Lonardo, A.; Martinelli, M.; Paolucci, P. S.; Pastorelli, E.; Pontisso, L.; Simula, F.; Vicini, P.

    2017-01-01

    State-of-the-art technology supports the High Energy Physics community in addressing the problem of managing an overwhelming amount of experimental data. From the point of view of communication between the detectors' readout system and computing nodes, the critical issues are the following: latency, moving data in a deterministic and low amount of time; bandwidth, guaranteeing the maximum capability of the link and communication protocol adopted; endpoint consolidation, tight aggregation of channels on a single board. This contribution describes the status and performances of the NaNet project, whose goal is the design of a family of FPGA-based PCIe network interface cards. The efforts of the team are focused on implementing a low-latency, real-time data transport mechanism between the board network multi-channel system and CPU and GPU accelerators memories on the host. Several opportunities concerning technical solutions and scientific applications have been explored: NaNet-1 with a single GbE I/O interface, and NaNet-10, offering four 10GbE ports, for activities related to the GPU-based real-time trigger of NA62 experiment at CERN; NaNet ^3 , with four 2.5Gbit optical channels, developed for the KM3NeT-ITALIA underwater neutrino telescope.

  19. OPENING HOURS FOR CARDS OFFICE

    CERN Multimedia

    Human Resources Division

    2001-01-01

    Due to the extra workload generated by the global renewal of French cards and in order to preserve the level of service offered by the cards office, please note that this office will in future be open every morning from 8.30 a.m. to 12.30 p.m. until further notice. The service can be contacted by telephone during the same hours. Thank you for your understanding.

  20. Card counting in continuous time

    OpenAIRE

    Andersson, Patrik

    2012-01-01

    We consider the problem of finding an optimal betting strategy for a house-banked casino card game that is played for several coups before reshuffling. The sampling without replacement makes it possible to take advantage of the changes in the expected value as the deck is depleted, making large bets when the game is advantageous. Using such a strategy, which is easy to implement, is known as card counting. We consider the case of a large number of decks, making an approximat...

  1. Play the European card

    International Nuclear Information System (INIS)

    Majewski, O.

    1999-01-01

    Dr. Otto Majewski, Chief Executive Officer of the Bayernwerk AG utility, in his capacity as Chairman of the European Nuclear Council pointed out at ENC 98 in Nice that national energy policies constituted a major danger to the use of nuclear power. At the same time, he indicated ways and means by which to evade that danger. The decisions taken in Sweden and in the Federal Republic of Germany to opt out of the use of nuclear power show that national energy policies can seriously jeopardize the use of nuclear power. Bayernwerk CEO Dr. Majewski urged nuclear power plant operators to counteract these tendencies by playing the European card. Nuclear power anyway was a classical topic of European cooperation which, in the past, had resulted in higher safety standards and in the development of the EPR. It should also be attempted, by working on European institutions, to strengthen the use of nuclear power, even on a national level. He invoked economic arguments against nuclear opponents, especially the preservation of competitiveness by means of lower electricity prices, and arguments of climate protection. (orig.) [de

  2. Parallel data grabbing card based on PCI bus RS422

    International Nuclear Information System (INIS)

    Zhang Zhenghui; Shen Ji; Wei Dongshan; Chen Ziyu

    2005-01-01

    This article briefly introduces the developments of the parallel data grabbing card based on RS422 and PCI bus. It could be applied for grabbing the 14 bits parallel data in high speed, coming from the devices with RS422 interface. The methods of data acquisition which bases on the PCI protocol, the functions and their usages of the chips employed, the ideas and principles of the hardware and software designing are presented. (authors)

  3. Laboratory skinpatches and smart cards based on foils.

    Science.gov (United States)

    Ruano-López, Jesús M; Laouenan, Florian; Agirregabiria, Maria; Rodriguez, Sonia; Krüger, Jan; Flavin, Diarmuid

    2011-01-01

    This paper presents: (i) a hand held system consisting of a portable platform and disposable polymeric Lab-on-a-card capable of performing a nucleic acid concentration, amplification and detection with reagents inside; and a (ii) wearable diagnostic Lab-on-a-Paper skinpatch system, capable of performing in-situ sweat sampling, analyte pre-concentration, and immunoassay analysis. The skinpatch works in conjunction with a hand-held optoelectronic reader / micro PC fluorescence analysis interface.

  4. Data management and communication networks for Man-Machine Interface System in Korea Advanced Liquid MEtal Reactor : its functionality and design requirements

    International Nuclear Information System (INIS)

    Cha, Kyung Ho; Park, Gun Ok; Suh, Sang Moon; Kim, Jang Yeol; Kwon, Kee Choon

    1998-01-01

    The DAta management and Communication NETworks(DACONET), which it is designed as a subsystem for Man-Machine Interface System of Korea Advanced LIquid MEtal Reactor(KALIMER MMIS) and advanced design concept is approached, is described. The DACONET has its roles of providing the real-time data transmission and communication paths between MMIS systems, providing the quality data for protection, monitoring and control of KALIMER and logging the static and dynamic behavioral data during KALIMER operation. The DACONET is characterized as the distributed real-time system architecture with high performance. Future direction, in which advanced technology is being continually applied to Man-Machine Interface System development and communication networks of KALIMER MMIS

  5. Data management and communication networks for Man-Machine Interface System in Korea Advanced Liquid MEtal Reactor : its functionality and design requirements

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Kyung Ho; Park, Gun Ok; Suh, Sang Moon; Kim, Jang Yeol; Kwon, Kee Choon [KAERI, Taejon (Korea, Republic of)

    1998-05-01

    The DAta management and Communication NETworks(DACONET), which it is designed as a subsystem for Man-Machine Interface System of Korea Advanced LIquid MEtal Reactor(KALIMER MMIS) and advanced design concept is approached, is described. The DACONET has its roles of providing the real-time data transmission and communication paths between MMIS systems, providing the quality data for protection, monitoring and control of KALIMER and logging the static and dynamic behavioral data during KALIMER operation. The DACONET is characterized as the distributed real-time system architecture with high performance. Future direction, in which advanced technology is being continually applied to Man-Machine Interface System development and communication networks of KALIMER MMIS.

  6. Data management and communication networks for man-machine interface system in Korea Advanced LIquid MEtal Reactor : Its functionality and design requirements

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Kyung Ho; Park, Gun Ok; Suh, Sang Moon; Kim, Jang Yeol; Kwon, Kee Choon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1999-12-31

    The DAta management and COmmunication NETworks(DACONET), which it is designed as a subsystem for Man-Machine Interface System of Korea Advanced LIquid MEtal Reactor (KALIMER MMIS) and advanced design concept is approached, is described. The DACONET has its roles of providing the real-time data transmission and communication paths between MMIS systems, providing the quality data for protection, monitoring and control of KALIMER and logging the static and dynamic behavioral data during KALIMER operation. The DACONET is characterized as the distributed real-time system architecture with high performance. Future direction, in which advanced technology is being continually applied to Man-Machine Interface System development of Nuclear Power Plants, will be considered for designing data management and communication networks of KALIMER MMIS. 9 refs., 1 fig. (Author)

  7. Data management and communication networks for man-machine interface system in Korea Advanced LIquid MEtal Reactor : Its functionality and design requirements

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Kyung Ho; Park, Gun Ok; Suh, Sang Moon; Kim, Jang Yeol; Kwon, Kee Choon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1998-12-31

    The DAta management and COmmunication NETworks(DACONET), which it is designed as a subsystem for Man-Machine Interface System of Korea Advanced LIquid MEtal Reactor (KALIMER MMIS) and advanced design concept is approached, is described. The DACONET has its roles of providing the real-time data transmission and communication paths between MMIS systems, providing the quality data for protection, monitoring and control of KALIMER and logging the static and dynamic behavioral data during KALIMER operation. The DACONET is characterized as the distributed real-time system architecture with high performance. Future direction, in which advanced technology is being continually applied to Man-Machine Interface System development of Nuclear Power Plants, will be considered for designing data management and communication networks of KALIMER MMIS. 9 refs., 1 fig. (Author)

  8. The Influence of Social Networks on the Development of Recruitment Actions that Favor User Interface Design and Conversions in Mobile Applications Powered by Linked Data

    OpenAIRE

    Palos-Sanchez, Pedro R.; Saura, Jose Ramon; Debasa, Felipe

    2018-01-01

    This study analyzes the most important influence factors in the literature, which have the greatest influence on the conversions obtained in a mobile application powered by linked data. With the study of user interface design and a small user survey (n = 101,053), we studied the influence of social networks, advertising, and promotional and recruitment actions in conversions for mobile applications powered by linked data. The analysis of the users’ behavior and their application in the design...

  9. Design and validation of a real-time spiking-neural-network decoder for brain-machine interfaces

    Science.gov (United States)

    Dethier, Julie; Nuyujukian, Paul; Ryu, Stephen I.; Shenoy, Krishna V.; Boahen, Kwabena

    2013-06-01

    Objective. Cortically-controlled motor prostheses aim to restore functions lost to neurological disease and injury. Several proof of concept demonstrations have shown encouraging results, but barriers to clinical translation still remain. In particular, intracortical prostheses must satisfy stringent power dissipation constraints so as not to damage cortex. Approach. One possible solution is to use ultra-low power neuromorphic chips to decode neural signals for these intracortical implants. The first step is to explore in simulation the feasibility of translating decoding algorithms for brain-machine interface (BMI) applications into spiking neural networks (SNNs). Main results. Here we demonstrate the validity of the approach by implementing an existing Kalman-filter-based decoder in a simulated SNN using the Neural Engineering Framework (NEF), a general method for mapping control algorithms onto SNNs. To measure this system’s robustness and generalization, we tested it online in closed-loop BMI experiments with two rhesus monkeys. Across both monkeys, a Kalman filter implemented using a 2000-neuron SNN has comparable performance to that of a Kalman filter implemented using standard floating point techniques. Significance. These results demonstrate the tractability of SNN implementations of statistical signal processing algorithms on different monkeys and for several tasks, suggesting that a SNN decoder, implemented on a neuromorphic chip, may be a feasible computational platform for low-power fully-implanted prostheses. The validation of this closed-loop decoder system and the demonstration of its robustness and generalization hold promise for SNN implementations on an ultra-low power neuromorphic chip using the NEF.

  10. An investigation on effects of amputee's physiological parameters on maximum pressure developed at the prosthetic socket interface using artificial neural network.

    Science.gov (United States)

    Nayak, Chitresh; Singh, Amit; Chaudhary, Himanshu; Unune, Deepak Rajendra

    2017-10-23

    Technological advances in prosthetics have attracted the curiosity of researchers in monitoring design and developments of the sockets to sustain maximum pressure without any soft tissue damage, skin breakdown, and painful sores. Numerous studies have been reported in the area of pressure measurement at the limb/socket interface, though, the relation between amputee's physiological parameters and the pressure developed at the limb/socket interface is still not studied. Therefore, the purpose of this work is to investigate the effects of patient-specific physiological parameters viz. height, weight, and stump length on the pressure development at the transtibial prosthetic limb/socket interface. Initially, the pressure values at the limb/socket interface were clinically measured during stance and walking conditions for different patients using strain gauges placed at critical locations of the stump. The measured maximum pressure data related to patient's physiological parameters was used to develop an artificial neural network (ANN) model. The effects of physiological parameters on the pressure development at the limb/socket interface were examined using the ANN model. The analyzed results indicated that the weight and stump length significantly affects the maximum pressure values. The outcomes of this work could be an important platform for the design and development of patient-specific prosthetic socket which can endure the maximum pressure conditions at stance and ambulation conditions.

  11. Credit Card Debt Hardship Letter Samples

    OpenAIRE

    lissa coffey

    2016-01-01

    Having trouble with your credit card debt? Below you will find examples of hardship letters. There are several things to consider when writing a credit card hardship letter. A hardship letter is the first step to letting the credit card company know that things are bad. This free credit card hardship letter sample is only a guide in order to start the negotiation. Credit card debt hardship letter example, hardship letter to credit card. If you are having trouble paying off your debt and need ...

  12. Passive microfluidic array card and reader

    Science.gov (United States)

    Dugan, Lawrence Christopher [Modesto, CA; Coleman, Matthew A [Oakland, CA

    2011-08-09

    A microfluidic array card and reader system for analyzing a sample. The microfluidic array card includes a sample loading section for loading the sample onto the microfluidic array card, a multiplicity of array windows, and a transport section or sections for transporting the sample from the sample loading section to the array windows. The microfluidic array card reader includes a housing, a receiving section for receiving the microfluidic array card, a viewing section, and a light source that directs light to the array window of the microfluidic array card and to the viewing section.

  13. Java Card for PayTv Application

    OpenAIRE

    Dutta, Pallab

    2013-01-01

    Smart cards are widely used along with PayTV receivers to store secret user keys and to perform security functions to prevent any unauthorized viewing of PayTV channels. Java Card technology enables programs written in the Java programming language to run on smart cards. Smart cards represent one of the smallest computing platforms in use today. The memory configuration of a smart card are of the order of 4K of RAM, 72K of EEPROM, and 24K of ROM. Using Java card provides advantages to the ind...

  14. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    HR Division

    2000-01-01

    Members of the personnel, holders ofSWISS LEGITIMATION CARDSdue to expire during the year 2000, need to change them.Those concerned should bring:a recent passport photo (with NAME and first name on the back)the expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to:Bureau des cartes, Bât 33.1-009/1-011.HR Division will notify members of personnel as soon as the new cards are available.Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organisation will not take any responsibility in case of difficulties with the customs authorities or the police.Human Resources DivisionTel. 79494-74683

  15. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    HR DIVISION

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDSdue to expire during the year 2000, need to change them.Those concerned should bring:a recent passport photo (with NAME and first name on the back)the expired (or due to expire) card and a photocopy (for certified authentication)to: Bureau des cartes, building 33/1-025Members of personnel will be notified by HR Division as soon as the new cards are available.Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organization will not take any responsibility in case of difficulties with the customs authorities or the police.Human Resources DivisionTel. 79494-74683

  16. RENEWAL OF SWISS LEGITIMATION CARDS

    CERN Multimedia

    Division des Ressources Humaines

    2000-01-01

    Members of the personnel, holders of SWISS LEGITIMATION CARDSdue to expire during the year 2000, need to change them.Those concerned should bring:-\ta recent passport photo (with NAME and first name on the back)-\tthe expired (or due to expire) card and a recto-verso photocopy on A4 size paper (for certified authentication) to:Bureau des cartes, bât 33.1-009/1-011.HR Division will notify members of personnel as soon as the new cards are available.Be careful: if you are in possession of expired cards (Swiss or French), or if you present non-certified copies, the Organisation will not take any responsibility in case of difficulties with the customs authorities or the police.Human Resources DivisionTel. 79494-74683

  17. Reminder: Swiss and French cards

    CERN Multimedia

    2012-01-01

    Communication from the HR Department to members of personnel holding an employment or association contract, above 50% and for more than 3 months, with the Organization. The HR Department would like to remind all members of personnel concerned that they are obliged to: • hold a valid Swiss  Légitimation card AND a valid French card (“Titre de séjour spécial” or “attestation de fonctions”) at all times during the exercise of their functions in the Organization; • return these documents as soon as their functions in the Organization cease. Not following these rules could be prejudicial to the Organization and appropriate measures may be taken towards the member of personnel concerned. Information and procedures concerning Swiss and French cards (first application, renewal, theft/loss, etc.) are available in the Admin e-guide. Users and Unpaid Associates must contact the Users Office HR Department Tel.: 729...

  18. Swiss and French cards - Reminder

    CERN Multimedia

    HR Department

    2011-01-01

    Communication from the HR Department to members of personnel holding an employment or association contract, above 50% and for more than 3 months, with the Organization. The HR Department would like to remind all members of the personnel concerned that they are obliged to: hold a valid Swiss Légitimation card AND a valid French card (“Titre de séjour spécial” or “attestation de fonctions”) at all times during the exercise of their functions in the Organization; return these documents as soon as their functions in the Organization cease. Not following these rules could be prejudicial to the Organization and appropriate measures may be taken with respect to the member of the personnel concerned. Information and procedures concerning Swiss and French cards (first application, renewal, theft/loss, etc.) are available in the Admin e-guide: https://cern.ch/admin-eguide/cartes/proc_cartes_home.asp Users and Unpaid Associates must ...

  19. The SMile Card: a computerised data card for multiple sclerosis patients. SMile Card Scientific Board.

    Science.gov (United States)

    Mancardi, G L; Uccelli, M M; Sonnati, M; Comi, G; Milanese, C; De Vincentiis, A; Battaglia, M A

    2000-04-01

    The SMile Card was developed as a means for computerising clinical information for the purpose of transferability, accessibility, standardisation and compilation of a national database of demographic and clinical information about multiple sclerosis (MS) patients. In many European countries, centres for MS are organised independently from one another making collaboration, consultation and patient referral complicated. Only the more highly advanced clinical centres, generally located in large urban areas, have had the possibility to utilise technical possibilities for improving the organisation of patient clinical and research information, although independently from other centres. The information system, developed utilising the Visual Basic language for Microsoft Windows 95, stores information via a 'smart card' in a database which is initiated and updated utilising a microprocessor, located at each neurological clinic. The SMile Card, currently being tested in Italy, permits patients to carry with them all relevant medical information without limitations. Neurologists are able to access and update, via the microprocessor, the patient's entire medical history and MS-related information, including the complete neurological examination and laboratory test results. The SMile Card provides MS patients and neurologists with a complete computerised archive of clinical information which is accessible throughout the country. In addition, data from the SMile Card system can be exported to other database programs.

  20. Telematics and smart cards in integrated health information system.

    Science.gov (United States)

    Sicurello, F; Nicolosi, A

    1997-01-01

    Telematics and information technology are the base on which it will be possible to build an integrated health information system to support population and improve their quality of life. This system should be based on record linkage of all data based on the interactions of the patients with the health structures, such as general practitioners, specialists, health institutes and hospitals, pharmacies, etc. The record linkage can provide the connection and integration of various records, thanks to the use of telematic technology (either urban or geographical local networks, such as the Internet) and electronic data cards. Particular emphasis should be placed on the introduction of smart cards, such as portable health cards, which will contain a standardized data set and will be sufficient to access different databases found in various health services. The inter-operability of the social-health records (including multimedia types) and the smart cards (which are one of the most important prerequisites for the homogenization and wide diffusion of these cards at an European level) should be strongly taken into consideration. In this framework a project is going to be developed aiming towards the integration of various data bases distributed territorially, from the reading of the software and the updating of the smart cards to the complete management of the patients' evaluation records, to the quality of the services offered and to the health planning. The applications developed will support epidemiological investigation software and data analysis. The inter-connection of all the databases of the various structures involved will take place through a coordination center, the most important system of which we will call "record linkage" or "integrated database". Smart cards will be distributed to a sample group of possible users and the necessary smart card management tools will be installed in all the structures involved. All the final users (the patients) in the whole

  1. An Anonymous Credit Card System

    Science.gov (United States)

    Androulaki, Elli; Bellovin, Steven

    Credit cards have many important benefits; however, these same benefits often carry with them many privacy concerns. In particular, the need for users to be able to monitor their own transactions, as well as bank’s need to justify its payment requests from cardholders, entitle the latter to maintain a detailed log of all transactions its credit card customers were involved in. A bank can thus build a profile of each cardholder even without the latter’s consent. In this paper, we present a practical and accountable anonymous credit system based on ecash, with a privacy preserving mechanism for error correction and expense-reporting.

  2. Calibration of TOB+ Thermometer's Cards

    CERN Document Server

    Banitt, Daniel

    2014-01-01

    Motivation - Under the new upgrade of the CMS detector the working temperature of the trackers had been reduced to -27 Celsius degrees. Though the thermal sensors themselves (Murata and Fenwal thermistors) are effective at these temperatures, the max1542 PLC (programmable logic controller) cards, interpreting the resistance of the thermal sensors into DC counts usable by the DCS (detector control system), are not designed for these temperatures in which the counts exceed their saturation and therefor had to be replaced. In my project I was in charge of handling the emplacement and calibration of the new PLC cards to the TOB (tracker outer barrel) control system.

  3. APEnet+: high bandwidth 3D torus direct network for petaflops scale commodity clusters

    International Nuclear Information System (INIS)

    Ammendola, R; Salamon, A; Salina, G; Biagioni, A; Prezza, O; Cicero, F Lo; Lonardo, A; Paolucci, P S; Rossetti, D; Tosoratto, L; Vicini, P; Simula, F

    2011-01-01

    We describe herein the APElink+ board, a PCIe interconnect adapter featuring the latest advances in wire speed and interface technology plus hardware support for a RDMA programming model and experimental acceleration of GPU networking; this design allows us to build a low latency, high bandwidth PC cluster, the APEnet+ network, the new generation of our cost-effective, tens-of-thousands-scalable cluster network architecture. Some test results and characterization of data transmission of a complete testbench, based on a commercial development card mounting an Altera ® FPGA, are provided.

  4. APEnet+: high bandwidth 3D torus direct network for petaflops scale commodity clusters

    Energy Technology Data Exchange (ETDEWEB)

    Ammendola, R; Salamon, A; Salina, G [INFN Tor Vergata, Roma (Italy); Biagioni, A; Prezza, O; Cicero, F Lo; Lonardo, A; Paolucci, P S; Rossetti, D; Tosoratto, L; Vicini, P [INFN Roma, Roma (Italy); Simula, F [Sapienza Universita di Roma, Roma (Italy)

    2011-12-23

    We describe herein the APElink+ board, a PCIe interconnect adapter featuring the latest advances in wire speed and interface technology plus hardware support for a RDMA programming model and experimental acceleration of GPU networking; this design allows us to build a low latency, high bandwidth PC cluster, the APEnet+ network, the new generation of our cost-effective, tens-of-thousands-scalable cluster network architecture. Some test results and characterization of data transmission of a complete testbench, based on a commercial development card mounting an Altera{sup Registered-Sign} FPGA, are provided.

  5. Developing a Hypercard-UNIX Interface for Electronic Mail Transfer

    Science.gov (United States)

    1992-06-01

    My thanks to Greqg for his support. Many of the comments for -- the MacTCP version are his. His code is set ,%ppart by borders. on openStacK put the...HUES-ModemVersion......- *-*-*-* STACK SCRIPTi "-*-*-* on openStack put the seconds into card fid theTime of card interface hide menubar global...34Loqin" hide fid receiving put empty into cd tia msqname of card theoessaqe end openStack on closeStack global logoutme put eqFpty into card fld text of

  6. House of Cards and the Paradoxical Role of Netflix

    DEFF Research Database (Denmark)

    Nielsen, Jakob Isak

    2013-01-01

    : series commissioned by advertiser-based broadcast networks, series commissioned by subscription-based premium cable networks and series commissioned by basic cable networks that rely on a combination of subscription and advertiser funding. Each of these platforms informs the audiovisual strategy...... of Cards (2013), available exclusively on the company’s streaming service. The situation is interesting for a number of reasons. First, Netflix seems to enter into competition with the very conglomerates (particularly their premium and basic cable subsidiaries) whom they rely on for acquiring rights...

  7. NCDC Punched Card Inventory - 1950s

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Index of foreign weather data available on punched cards held at the Joint Punched Card Library in Asheville NC, produced in the late 1950s, and also station/data...

  8. One-Card Programs Boast Endless Options.

    Science.gov (United States)

    Pearcey, Kevin

    2003-01-01

    Discusses how all-campus ID cards are easy to manage, enhance overall campus security, lower operating expenses, and provide a chance to build lasting relationships with the community by taking the card to off-campus businesses. (EV)

  9. Main components of business cards design

    Directory of Open Access Journals (Sweden)

    Ю. В. Романенкова

    2003-03-01

    Full Text Available The essay is dedicated to the urgent problem of necessity of creation of professional design of business cards, that are important part of the image of modem businessman. There are classification of cards by functional principle, the functions of cards of each type were analyzed. All components of business card, variants of its composition schemes, color characteristics, principles of use of trade marks and other design elements have been allocated

  10. The Influence of Social Networks on the Development of Recruitment Actions that Favor User Interface Design and Conversions in Mobile Applications Powered by Linked Data

    Directory of Open Access Journals (Sweden)

    Pedro R. Palos-Sanchez

    2018-01-01

    Full Text Available This study analyzes the most important influence factors in the literature, which have the greatest influence on the conversions obtained in a mobile application powered by linked data. With the study of user interface design and a small user survey (n = 101,053, we studied the influence of social networks, advertising, and promotional and recruitment actions in conversions for mobile applications powered by linked data. The analysis of the users’ behavior and their application in the design of the actions to promote and capture constitutes an important part of the current theories of digital marketing. However, this study shows that its results may be contradictory and depend on other factors and circumstances when mobile applications powered by linked data are considered. The predictive value, reached by the developed model, may be useful for professionals and researchers in the field of digital marketing and the user interface design in mobile applications powered by linked data.

  11. Palmistry, tarot cards, and psychotherapy.

    Science.gov (United States)

    Pejic, Nicholas G

    2008-01-01

    The author summarizes his experience with palm and Tarot card readers in New Orleans. The history, practice, and psychodynamics of palmistry and Tarot are explored. It's postulated that these practices are forms of archaic psychotherapy, which employ supportive treatment and placebo. These tactics are used to elicit hope for its clients.

  12. Comparing Candidate Hospital Report Cards

    Energy Technology Data Exchange (ETDEWEB)

    Burr, T.L.; Rivenburgh, R.D.; Scovel, J.C.; White, J.M.

    1997-12-31

    We present graphical and analytical methods that focus on multivariate outlier detection applied to the hospital report cards data. No two methods agree which hospitals are unusually good or bad, so we also present ways to compare the agreement between two methods. We identify factors that have a significant impact on the scoring.

  13. Citizen empowerment using healthcare and welfare cards.

    Science.gov (United States)

    Cheshire, Paul

    2006-01-01

    Cards are used in health and welfare to establish the identity of the person presenting the card; to prove their entitlement to a welfare or healthcare service; to store data needed within the care process; and to store data to use in the administration process. There is a desire to empower citizens - to give them greater control over their lives, their health and wellbeing. How can a healthcare and welfare card support this aim? Does having a card empower the citizen? What can a citizen do more easily, reliably, securely or cost-effectively because they have a card? A number of possibilities include: Choice of service provider; Mobility across regional and national boundaries; Privacy; and Anonymity. But in all of these possibilities a card is just one component of a total system and process, and there may be other solutions--technological and manual. There are risks and problems from relying on a card; and issues of Inclusion for people who are unable use a card. The article concludes that: cards need to be viewed in the context of the whole solution; cards are not the only technological mechanism; cards are not the best mechanism in all circumstances; but cards are very convenient method in very many situations.

  14. Engineering software development with HyperCard

    Science.gov (United States)

    Darko, Robert J.

    1990-01-01

    The successful and unsuccessful techniques used in the development of software using HyperCard are described. The viability of the HyperCard for engineering is evaluated and the future use of HyperCard by this particular group of developers is discussed.

  15. Helping Students Design HyperCard Stacks.

    Science.gov (United States)

    Dunham, Ken

    1995-01-01

    Discusses how to teach students to design HyperCard stacks. Highlights include introducing HyperCard, developing storyboards, introducing design concepts and scripts, presenting stacks, evaluating storyboards, and continuing projects. A sidebar presents a HyperCard stack evaluation form. (AEF)

  16. The Visualization Toolkit (VTK): Rewriting the rendering code for modern graphics cards

    Science.gov (United States)

    Hanwell, Marcus D.; Martin, Kenneth M.; Chaudhary, Aashish; Avila, Lisa S.

    2015-09-01

    The Visualization Toolkit (VTK) is an open source, permissively licensed, cross-platform toolkit for scientific data processing, visualization, and data analysis. It is over two decades old, originally developed for a very different graphics card architecture. Modern graphics cards feature fully programmable, highly parallelized architectures with large core counts. VTK's rendering code was rewritten to take advantage of modern graphics cards, maintaining most of the toolkit's programming interfaces. This offers the opportunity to compare the performance of old and new rendering code on the same systems/cards. Significant improvements in rendering speeds and memory footprints mean that scientific data can be visualized in greater detail than ever before. The widespread use of VTK means that these improvements will reap significant benefits.

  17. An end-to-end secure patient information access card system.

    Science.gov (United States)

    Alkhateeb, A; Singer, H; Yakami, M; Takahashi, T

    2000-03-01

    The rapid development of the Internet and the increasing interest in Internet-based solutions has promoted the idea of creating Internet-based health information applications. This will force a change in the role of IC cards in healthcare card systems from a data carrier to an access key medium. At the Medical Informatics Department of Kyoto University Hospital we are developing a smart card patient information project where patient databases are accessed via the Internet. Strong end-to-end data encryption is performed via Secure Socket Layers, transparent to transmit patient information. The smart card is playing the crucial role of access key to the database: user authentication is performed internally without ever revealing the actual key. For easy acceptance by healthcare professionals, the user interface is integrated as a plug-in for two familiar Web browsers, Netscape Navigator and MS Internet Explorer.

  18. A new PCI card for readout in high energy physics experiments

    CERN Document Server

    Floris, M; Marras, D; Usai, G L; David, A

    2004-01-01

    Recently some high energy physics experiments started to adopt readout systems based on the PCI architecture. In this context a new PCI card that can be adapted to several readout schemes has been designed. The card contains a large 64 MB local buffer, programmable FPGA logic and a PLX PCI bridge. The solution to use a PCI bridge external to the programmable logic allows to greatly simplify projects at the level of the on-board local bus. The card is presently used as the basic readout unit of the NA60 experiment. In this context, coupling it to different mezzanine cards it is possible to create interfaces to VME/CAMAC modules or to custom front-end electronics as for the case of the silicon vertex detector. Moreover, it is used as a readout test system for the ALICE muon chambers. (10 refs).

  19. PCI Based Read-out Receiver Card in the ALICE DAQ System

    CERN Document Server

    Carena, W; Dénes, E; Divià, R; Schossmaier, K; Soós, C; Sulyán, J; Vascotto, Alessandro; Van de Vyvre, P

    2001-01-01

    The Detector Data Link (DDL) is the high-speed optical link for the ALICE experiment. This link shall transfer the data coming from the detectors at 100 MB/s rate. The main components of the link have been developed: the destination Interface Unit (DIU), the Source Interface Unit (SIU) and the Read-out Receiver Card (RORC). The first RORC version is based on the VME bus. The performance tests show that the maximum VME bandwidth could be reached. Meanwhile the PCI bus became very popular and is used in many platforms. The development of a PCI-based version has been started. The document describes the prototype version in three sections. An overview explains the main purpose of the card: to provide an interface between the DDL and the PCI bus. Acting as a 32bit/33MHz PCI master the card is able to write or read directly to or from the system memory from or to the DDL, respectively. Beside these functions the card can also be used as an autonomous data generator. The card has been designed to be well adapted to ...

  20. A Privacy-Protecting Authentication Scheme for Roaming Services with Smart Cards

    Science.gov (United States)

    Son, Kyungho; Han, Dong-Guk; Won, Dongho

    In this work we propose a novel smart card based privacy-protecting authentication scheme for roaming services. Our proposal achieves so-called Class 2 privacy protection, i.e., no information identifying a roaming user and also linking the user's behaviors is not revealed in a visited network. It can be used to overcome the inherent structural flaws of smart card based anonymous authentication schemes issued recently. As shown in our analysis, our scheme is computationally efficient for a mobile user.

  1. Circuit card failures and industry mitigation strategy

    Energy Technology Data Exchange (ETDEWEB)

    Mondal, U. [Candu Owners Group, Toronto, Ontario (Canada)

    2012-07-01

    In recent years the nuclear industry has experienced an increase in circuit card failures due to ageing of components, inadequate Preventive Maintenance (PM), lack of effective circuit card health monitoring, etc. Circuit card failures have caused loss of critical equipment, e.g., electro hydraulic governors, Safety Systems, resulting in loss of function and in some cases loss of generation. INPO completed a root cause analysis of 40 Reactor Trips/Scrams in US reactors and has recommended several actions to mitigate Circuit Card failures. Obsolescence of discrete components has posed many challenges in conducting effective preventative maintenance on circuit cards. In many cases, repairs have resulted in installation of components that compromise performance of the circuit cards. Improper termination and worn edge connectors have caused intermittent contacts contributing to circuit card failures. Traditionally, little attention is paid to relay functions and preventative maintenance of relay. Relays contribute significantly to circuit card failures and have dominated loss of generation across the power industry. The INPO study recommended a number of actions to mitigate circuit card failures, such as; identification of critical components and single point vulnerabilities; strategic preventative maintenance; protection of circuit boards against electrostatic discharge; limiting power cycles; performing an effective burn-in prior to commissioning of the circuit cards; monitoring performance of DC power supplies; limiting cabinet temperatures; managing of component aging/degradation mechanism, etc. A subcommittee has been set up under INPO sponsorship to understand the causes of circuit card failure and to develop an effective mitigation strategy. (author)

  2. DIII-D Neutral Beam control system operator interface

    International Nuclear Information System (INIS)

    Harris, J.J.; Campbell, G.L.

    1993-10-01

    A centralized graphical user interface has been added to the DIII-D Neutral Beam (NB) control systems for status monitoring and remote control applications. This user interface provides for automatic data acquisition, alarm detection and supervisory control of the four NB programmable logic controllers (PLC) as well as the Mode Control PLC. These PLCs are used for interlocking, control and status of the NB vacuum pumping, gas delivery, and water cooling systems as well as beam mode status and control. The system allows for both a friendly user interface as well as a safe and convenient method of communicating with remote hardware that formerly required interns to access. In the future, to enable high level of control of PLC subsystems, complete procedures is written and executed at the touch of a screen control panel button. The system consists of an IBM compatible 486 computer running the FIX DMACS trademark for Windows trademark data acquisition and control interface software, a Texas Instruments/Siemens communication card and Phoenix Digital optical communications modules. Communication is achieved via the TIWAY (Texas Instruments protocol link utilizing both fiber optic communications and a copper local area network (LAN). Hardware and software capabilities will be reviewed. Data and alarm reporting, extended monitoring and control capabilities will also be discussed

  3. Construct mine environment monitoring system based on wireless mesh network

    Science.gov (United States)

    Chen, Xin; Ge, Gengyu; Liu, Yinmei; Cheng, Aimin; Wu, Jun; Fu, Jun

    2018-04-01

    The system uses wireless Mesh network as a network transmission medium, and strive to establish an effective and reliable underground environment monitoring system. The system combines wireless network technology and embedded technology to monitor the internal data collected in the mine and send it to the processing center for analysis and environmental assessment. The system can be divided into two parts: the main control network module and the data acquisition terminal, and the SPI bus technology is used for mutual communication between them. Multi-channel acquisition and control interface design Data acquisition and control terminal in the analog signal acquisition module, digital signal acquisition module, and digital signal output module. The main control network module running Linux operating system, in which the transplant SPI driver, USB card driver and AODV routing protocol. As a result, the internal data collection and reporting of the mine are realized.

  4. A contribution to the test software for the VXI electronic cards of the Eurogam multidetector in a Unix/VXWorks distributed environment

    International Nuclear Information System (INIS)

    Kadionik, P.

    1992-01-01

    The Eurogam gamma ray multidetector involves, in a first phase, 45 hyper pure Ge detectors, each surrounded by an Anti Compton shield of 10 BGO detectors. In order to ensure the highest reliability and an easy upgrade of the array, the electronic cards have been designed in the new VXI (VME Bus Extension to Instrumentation) standard; this allows to drive the 495 detectors with 4300 parameters to be adjusted by software. The data acquisition architecture is distributed on an Ethernet network. The software for set up and tests of the VXI cards have been written in C, it uses a real time kernel (VxWorks from Wind River Systems) interfaced to the Sun Unix environment. The inter-tasks communications use the Remote Procedure Calls protocol. The inner-shell of the software is connected to a data base and to a graphic interface which allows the engineers or physicists to have a very easy set-up for so many parameters to adjust

  5. Maximally resolved anharmonic OH vibrational spectrum of the water/ZnO(101 \\xAF 0) interface from a high-dimensional neural network potential

    Science.gov (United States)

    Quaranta, Vanessa; Hellström, Matti; Behler, Jörg; Kullgren, Jolla; Mitev, Pavlin D.; Hermansson, Kersti

    2018-06-01

    Unraveling the atomistic details of solid/liquid interfaces, e.g., by means of vibrational spectroscopy, is of vital importance in numerous applications, from electrochemistry to heterogeneous catalysis. Water-oxide interfaces represent a formidable challenge because a large variety of molecular and dissociated water species are present at the surface. Here, we present a comprehensive theoretical analysis of the anharmonic OH stretching vibrations at the water/ZnO(101 ¯ 0) interface as a prototypical case. Molecular dynamics simulations employing a reactive high-dimensional neural network potential based on density functional theory calculations have been used to sample the interfacial structures. In the second step, one-dimensional potential energy curves have been generated for a large number of configurations to solve the nuclear Schrödinger equation. We find that (i) the ZnO surface gives rise to OH frequency shifts up to a distance of about 4 Å from the surface; (ii) the spectrum contains a number of overlapping signals arising from different chemical species, with the frequencies decreasing in the order ν(adsorbed hydroxide) > ν(non-adsorbed water) > ν(surface hydroxide) > ν(adsorbed water); (iii) stretching frequencies are strongly influenced by the hydrogen bond pattern of these interfacial species. Finally, we have been able to identify substantial correlations between the stretching frequencies and hydrogen bond lengths for all species.

  6. Sustainability Cards: Design for Longevity

    DEFF Research Database (Denmark)

    Hasling, Karen Marie; Ræbild, Ulla

    2017-01-01

    Product longevity is considered widely as a relevant strategic approach, amongst many, within the field of sustainability. Yet, how to design for increased product lifetime may not be so obvious for practitioners. The complexity of the surrounding issues can constitute a barrier for designers...... for designers and other stakeholders in the design process. The paper is based on a developmental project carried out in the Autumn 2017, within a larger research and collaboration project between raw fur manufacturer Kopenhagen Fur and Design School Kolding investigating sustainability perspectives. The paper...... describes the development of a deck of sustainability cards aiming for product longevity and presents the final deck. Furthermore, the paper contributes with insights on how designers may apply design cards in the design process and how this practice can further sustainable considerations and strategies...

  7. Valutazione economica dello studio CARDS

    Directory of Open Access Journals (Sweden)

    Simona de Portu

    2007-10-01

    Full Text Available Introduction: cardiovascular diseases (CVD are the major component of premature mortality, generate disability and are a relevant source of cost. The growing incidence of CVD is associated with lifestyle and other modifiable risk factors. Prevention and preclinical detection of CVD reduce morbidity and mortality. Type 2 diabetes is associated with a substantially increased risk of cardiovascular disease. Objective: the aim of the study was to evaluate the health economic consequence of medical therapy with atorvastatin for primary prevention of major cardiovascular events in patients with type 2 diabetes in Italy. Materials and method: in order to reach our objective we drew clinical information from the CARDS study. This economic evaluation was carried out conducting a cost/effectiveness analysis from the perspective of National Health Service (NHS. The analysis was applied to a time horizon in conformity with the observational period adopted in the CARDS study (3.9 years. An incremental cost/effectiveness ratio (ICER was calculated and is expressed as cost per life years gained (LYG. In order to test the robustness of the results, a one-way sensitivity analysis was performed. Results: the total cost of atorvastatin therapy over 3.9 years amounts to around 1.5 million of euros per 1,000 patients. The total cost of adding atorvastatin to standard care in people treated for primary prevention of major cardiovascular events in type 2 diabetes as those involved in the CARDS study would entail an additional cost of about 1,2 million of euros per 1,000 patients treated per 3.9 years, with an incremental cost/effectiveness ratio (ICER equivalent to 36,566 euros per patient per LYG. Discussion: the current study is the first economic evaluation of CARDS study to the Italian situation. The results of the current study show that hypolipemic therapy with atorvastatin 10 mg in diabetic individuals is to be considered cost effective.

  8. [Application of patient card technology to health care].

    Science.gov (United States)

    Sayag, E; Danon, Y L

    1995-03-15

    The potential benefits of patient card technology in improving management and delivery of health services have been explored. Patient cards can be used for numerous applications and functions: as a means of identification, as a key for an insurance payment system, and as a communication medium. Advanced card technologies allow for the storage of data on the card, creating the possibility of a comprehensive and portable patient record. There are many types of patient cards: paper or plastic cards, microfilm cards, bar-code cards, magnetic-strip cards and integrated circuit smart-cards. Choosing the right card depends on the amount of information to be stored, the degree of security required and the cost of the cards and their supporting infrastructure. Problems with patient cards are related to storage capacity, backup and data consistency, access authorization and ownership and compatibility. We think it is worth evaluating the place of patient card technology in the delivery of health services in Israel.

  9. Rh-flash acquisition card

    International Nuclear Information System (INIS)

    Bourrion, O.

    2003-01-01

    The rh-flash card main purpose is to convert and store the image of the analog data present at input into an output buffer, namely in a given timing window besides a stop signal (like a digital oscilloscope). It is conceived in VME format 1U wide with an additional connector. Novelty of this card is its ability to sample at a high frequency, due to flash coders, and this at a high repetition rate. To do that the card allows the storage of the data considered 'useful' and that is done by storing only the data exceeding a certain threshold. This can be useful for instance for viewing peaks in a spectrum, and obtaining their relative location. The goal is to stock and process the data sampled before and after the arrival of a stop signal (what entails a storage depth). A threshold is defined and any peak exceeding its level will really be stored in the output buffer which is readable through the VME bus. The peak values will be stored as well as m preceding and n subsequent values (both programmable). Obviously, if the threshold is zero the system of data processing is off and all data will be stored. The document is structured on six sections titled: 1. Description; 2. Specifications; 3. Explaining the design of channels; 4. Explaining the shared part of the design; 5. Addressing (→ user guide); 6. Software precautions. (author)

  10. Feocromocitoma cardíaco

    Directory of Open Access Journals (Sweden)

    Gustavo L. Knop

    2006-01-01

    Full Text Available Los feocromocitomas cardíacos primarios (FCP son sumamente infrecuentes. Hasta el presente son menos de 50 los casos comunicados en el mundo. Presentamos el caso de un tumor intrapericárdico, que resultó ser un feocromocitoma primario, en una mujer de mediana edad, cuyo signo principal fue hipertensión arterial severa (HTAs. Los estudios diagnósticos por imágenes corroboraron la presencia de un tumor intrapericárdico como único hallazgo y los estudios bioquímicos de catecolaminas y sus metabolitos excretados por orina reafirmaron el diagnóstico etiológico. El tumor fue resecado quirúrgicamente sin complicaciones mediante cirugía cardíaca convencional con circulación extracorpórea (CEC y paro cardíaco con cardioplejía. Siete meses después de la operación, la paciente se encuentra asintomática y normotensa.

  11. WHAT INFLUENCE CREDIT CARD DEBTS IN YOUNG CONSUMERS IN MALAYSIA

    OpenAIRE

    Syed Shah ALAM; Ruzita Abdul RAHIM; Ridhwanul HAQ; Atiqur Rahman KHAN

    2014-01-01

    This paper examines empirically antecedents of the credit card debts in young consumers in Malaysia. We examine whether easy access to credit card, credit card related knowledge, aggressive promotion by credit card industry, low minimum payment requirement and attitude towards credit cards influence credit card debts in the younger generation. Regression model was used to meet the objectives. These findings based on a sample of 240 young credit card holders, show that the factors that affect ...

  12. Conceptualizing the Science-Practice Interface: Lessons from a Collaborative Network on the Front-Line of Climate Change

    Directory of Open Access Journals (Sweden)

    Nathan P. Kettle

    2017-06-01

    Full Text Available The gap between science and practice is widely recognized as a major concern in the production and application of decision-relevant science. This research analyzed the roles and network connections of scientists, service providers, and decision makers engaged in climate science and adaptation practice in Alaska, where rapid climate change is already apparent. Our findings identify key actors as well as significant differences in the level of bonding ties between network members who perceive similarity in their social identities, bridging ties between network members across different social groups, and control of information across roles—all of which inform recommendations for adaptive capacity and the co-production of usable knowledge. We also find that some individuals engage in multiple roles in the network suggesting that conceptualizing science policy interactions with the traditional categories of science producers and consumers oversimplifies how experts engage with climate science, services, and decision making. Our research reinforces the notion that the development and application of knowledge is a networked phenomenon and highlights the importance of centralized individuals capable of playing multiple roles in their networks for effective translation of knowledge into action.

  13. IGDS/TRAP Interface Program (ITIP). Software User Manual (SUM). [network flow diagrams for coal gasification studies

    Science.gov (United States)

    Jefferys, S.; Johnson, W.; Lewis, R.; Rich, R.

    1981-01-01

    This specification establishes the requirements, concepts, and preliminary design for a set of software known as the IGDS/TRAP Interface Program (ITIP). This software provides the capability to develop at an Interactive Graphics Design System (IGDS) design station process flow diagrams for use by the NASA Coal Gasification Task Team. In addition, ITIP will use the Data Management and Retrieval System (DMRS) to maintain a data base from which a properly formatted input file to the Time-Line and Resources Analysis Program (TRAP) can be extracted. This set of software will reside on the PDP-11/70 and will become the primary interface between the Coal Gasification Task Team and IGDS, DMRS, and TRAP. The user manual for the computer program is presented.

  14. Card Product Use and Perception of Marketing Communication by Card Issuers among Students

    Directory of Open Access Journals (Sweden)

    Đurđana Ozretić Došen

    2011-06-01

    Full Text Available Student population is a very interesting and important segment of the market to the marketing practitioners involved in card business. The services and products offered by card issuers to students are created with a view to attracting the kind of users who will grow accustomed to a long-term, loyal use of a chosen card brand, i.e. beyond the point at which they complete their academic education. This paper describes the exploratory research on card products designed for the student population which was conducted in the Republic of Croatia. Student awareness of card products and their habits associated with card use were also examined. Additional areas of research were student attitudes and perceptions with regard to card products and to the appeal of the marketing communications which target this specific market segment. Results showed that the majority of students hold debit cards of the banks in which they have their current accounts. Students use cards actively, most of all for the purpose of withdrawing cash at automated teller machines (ATMs and least of all for Internet purchases. They assess card use as being simple, and card holders are also aware of the various benefits provided through it. However, the recall of advertisements for card products point to the conclusion that card issuers do not communicate with students in a manner which the latter would find appealing.

  15. Slovenian national health insurance card: the next step.

    Science.gov (United States)

    Kalin, T; Kandus, G; Trcek, D; Zupan, B

    1999-01-01

    The Slovenian national health insurance company started a full-scale deployment of the insurance smart card that is at the present used for insurance data and identification purpose only. There is ample capacity on the cards that were selected, to contain much more data than needed for the purely administrative and charging purposes. There are plans to include some basic medical information, donor information, etc. On the other hand, there are no firm plans to use the security infrastructure and the extensive network, connecting the insurance company with the more than 200 self service terminals positioned at the medical facilities through the country to build an integrated medical information system that would be very beneficial to the patients and the medical community. This paper is proposing some possible future developments and further discusses on the security issues involved with such countrywide medical information system.

  16. Augmenting C-cards with music actions

    DEFF Research Database (Denmark)

    Jensen, Karl Kristoffer; Valente, Andrea; Lyon, Kirstin Catherine

    2006-01-01

    The paper proposes a new way of introducing music to classes of 8 to 10 years old pupils, by adopting a recent educational tool for teaching Computer Science. Our proposal builds in fact on computational cards (or c-cards), a playful and intuitive mind-tool, that has been applied to a variety...... of Computer Science concepts. Here a simple extension to c-cards is presented, that enables pupils to build and play with tangible musical machine....

  17. C-cards in Music Education

    DEFF Research Database (Denmark)

    Valente, Andrea; Lyon, Kirstin Catherine

    2005-01-01

    Music and Computer Science share a dual nature: theory and practice relate in complex ways, and seem to be equally central for learners; for this no standard teaching approach for children has yet emerged in either of these two areas. Computational cards is a tabletop game, where cards act...... of the card; if the action is to generate a sound, then the circuit will effectively became a music machine....

  18. Why do card issuers charge proportional fees?

    OpenAIRE

    Oz Shy; Zhu Wang

    2008-01-01

    This paper explains why payment card companies charge consumers and merchants fees which are proportional to the transaction values instead of charging a fixed per-transaction fee. Our theory shows that, even in the absence of any cost considerations, card companies earn much higher profit when they charge proportional fees. It is also shown that competition among merchants reduces card companies' gains from using proportional fees relative to a fixed per-transaction fee. Merchants are found ...

  19. Credit Card Selection Criteria: Singapore Perspective

    OpenAIRE

    Lydia L. Gan; Ramin Cooper Maysami

    2006-01-01

    This study used factor analysis to examine credit card selection criteria among Singaporeans. The results showed that convenience of use and protection, economics, and flexibility were the main drivers, while the reputation of card was the least important in determining credit card selection in Singapore. Demographic results showed that high-income earners, the better educated, the elderly, married and the professional preferred the convenience-protection factor to the economic-promotional fa...

  20. Optical smart card using semipassive communication.

    Science.gov (United States)

    Glaser, I; Green, Shlomo; Dimkov, Ilan

    2006-03-15

    An optical secure short-range communication system is presented. The mobile unit (optical smart card) of this system utilizes a retroreflector with an optical modulator, using light from the stationary unit; this mobile unit has very low power consumption and can be as small as a credit card. Such optical smart cards offer better security than RF-based solutions, yet do not require physical contact. Results from a feasibility study model are included.

  1. Prepaid cards: vulnerable to money laundering?

    OpenAIRE

    Stanley J. Sienkiewicz

    2007-01-01

    This paper discusses the potential money laundering threat that prepaid cards face as they enter the mainstream of consumer payments. Over the past year, several government agencies have issued reports describing the threat to the U.S. financial system, including the use of prepaid cards by money launderers. Also, this paper incorporates the presentations made at a workshop hosted by the Payment Cards Center at which Patrice Motz, executive vice president, Premier Compliance Solutions, and Pa...

  2. Falla cardíaca (primera parte)

    OpenAIRE

    Flórez Alarcón, Noel Alberto; Fundación Valle de Lili

    2006-01-01

    Anatomía y función del corazón/¿Qué es la falla cardíaca?/Causas de falla cardíaca/¿Cómo prevenir la falla cardíaca?/¿Qué es un factor de riesgo?/¿Cuáles son los síntomas y signos de la falla cardiaca?/¿Cómo se diagnostica la falla cardiaca?

  3. Fraud Detection in Credit Card Transactions; Using Parallel Processing of Anomalies in Big Data

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Taghva

    2016-10-01

    Full Text Available In parallel to the increasing use of electronic cards, especially in the banking industry, the volume of transactions using these cards has grown rapidly. Moreover, the financial nature of these cards has led to the desirability of fraud in this area. The present study with Map Reduce approach and parallel processing, applied the Kohonen neural network model to detect abnormalities in bank card transactions. For this purpose, firstly it was proposed to classify all transactions into the fraudulent and legal which showed better performance compared with other methods. In the next step, we transformed the Kohonen model into the form of parallel task which demonstrated appropriate performance in terms of time; as expected to be well implemented in transactions with Big Data assumptions.

  4. Bias-induced conformational switching of supramolecular networks of trimesic acid at the solid-liquid interface

    Science.gov (United States)

    Ubink, J.; Enache, M.; Stöhr, M.

    2018-05-01

    Using the tip of a scanning tunneling microscope, an electric field-induced reversible phase transition between two planar porous structures ("chickenwire" and "flower") of trimesic acid was accomplished at the nonanoic acid/highly oriented pyrolytic graphite interface. The chickenwire structure was exclusively observed for negative sample bias, while for positive sample bias only the more densely packed flower structure was found. We suggest that the slightly negatively charged carboxyl groups of the trimesic acid molecule are the determining factor for this observation: their adsorption behavior varies with the sample bias and is thus responsible for the switching behavior.

  5. Kinetic Interface

    DEFF Research Database (Denmark)

    2009-01-01

    A kinetic interface for orientation detection in a video training system is disclosed. The interface includes a balance platform instrumented with inertial motion sensors. The interface engages a participant's sense of balance in training exercises.......A kinetic interface for orientation detection in a video training system is disclosed. The interface includes a balance platform instrumented with inertial motion sensors. The interface engages a participant's sense of balance in training exercises....

  6. Médicarte software developed for the Quebec microprocessor health card project.

    Science.gov (United States)

    Lavoie, G; Tremblay, L; Durant, P; Papillon, M J; Bérubé, J; Fortin, J P

    1995-01-01

    The Quebec Patient Smart Card Project is a Provincial Government initiative under the responsibility of the Rgie de l'assurance-maladie du Québec (Quebec Health Insurance Board). Development, implementation, and assessment duties were assigned to a team from Université Laval, which in turn joined a group from the Direction de la santé publique du Bas-St-Laurent in Rimouski, where the experiment is taking place. The pilot project seeks to evaluate the use and acceptance of a microprocessor card as a way to improve the exchange of clinical information between card users and various health professionals. The card can be best described as a résumé containing information pertinent to an individual's health history. It is not a complete medical file; rather, it is a summary to be used as a starting point for a discussion between health professionals and patients. The target population is composed of persons 60 years and over, pregnant women, infants under 18 months, and the residents of a small town located in the target area, St-Fabien, regardless of age. The health professionals involved are general practitioners, specialists, pharmacists, nurses, and ambulance personnel. Participation in the project is on a voluntary basis. Each health care provider participating in the project has a personal identification number (PIN) and must use both an access card and a user card to access information. This prevents unauthorized access to a patient's card and allows the staff to sign and date information entered onto the patient card. To test the microprocessor card, we developed software based on a problem-oriented approach integrating diagnosis, investigations, treatments, and referrals. This software is not an expert system that constrains the clinician to a particular decisional algorithm. Instead, the software supports the physician in decision making. The software was developed with a graphical interface (Windows 3.1) to maximize its user friendliness. A version of the

  7. Synthesis of variable harmonic impedance in inverter-interfaced distributed generation unit for harmonic damping throughout a distribution network

    DEFF Research Database (Denmark)

    Wang, Xiongfei; Blaabjerg, Frede; Chen, Zhe

    2012-01-01

    This paper proposes a harmonic impedance synthesis technique for voltage-controlled distributed generation inverter in order to damp harmonic voltage distortion on a distribution network. The approach employs a multiloop control scheme, where a selective load harmonic current feedforward loop bas...

  8. Toronto Smog Summit Report Card

    International Nuclear Information System (INIS)

    2001-01-01

    This 'report card' provides a summary of actions taken, and progress achieved by the federal government, the provincial government and the City of Toronto, respectively, in response to various previous commitments regarding air quality, sustainable transportation, climate and atmospheric research, investing in green infrastructure (federal government), environmental assessment regulations, transboundary air pollution, improved monitoring and reporting regulations. Ratings also cover efforts in imposing emissions caps on the electric industry, emissions reduction trading system, toll-free public air pollution hotline, regulation of ozone depleting substances (provincial government), public education campaign on smog reduction, energy efficiency initiatives, corporate smog alert response plan, and a number of other environmental issues (City of Toronto)

  9. The "Negative" Credit Card Effect: Credit Cards as Spending-Limiting Stimuli in New Zealand

    Science.gov (United States)

    Lie, Celia; Hunt, Maree; Peters, Heather L.; Veliu, Bahrie; Harper, David

    2010-01-01

    The "credit card effect" describes a finding where greater value is given to consumer items if credit card logos are present. One explanation for the effect is that credit cards elicit spending behavior through associative learning. If this is true, social, economic and historical contexts should alter this effect. In Experiment 1, Year…

  10. Java Card: An analysis of the most successful smart card operating system

    NARCIS (Netherlands)

    de Jong, Eduard; Hartel, Pieter H.; Peyret, Patrice; Cattaneo, Peter

    2005-01-01

    To explain why the Java Card operating system has become the most successful smart card operating system to date, we analyze the realized features of the current Java Card version, we argue it could be enhanced by adding a number of intended features and we discuss a set of complementary features

  11. PEDOT:PSS interfaces support the development of neuronal synaptic networks with reduced neuroglia response in vitro

    Directory of Open Access Journals (Sweden)

    Giada eCellot

    2016-01-01

    Full Text Available The design of electrodes based on conductive polymers in brain-machine interface technology offers the opportunity to exploit variably manufactured materials to reduce gliosis, indeed the most common brain response to chronically implanted neural electrodes. In fact, the use of conductive polymers, finely tailored in their physical-chemical properties, might result in electrodes with improved adaptability to the brain tissue and increased charge-transfer efficiency. Here we interfaced poly(3,4-ethylenedioxythiophene:poly(styrene sulfonate (PEDOT:PSS doped with different amounts of ethylene glycol (EG with rat hippocampal primary cultures grown for 3 weeks on these synthetic substrates. We used immunofluorescence and scanning electron microscopy combined to single cell electrophysiology to assess the biocompatibility of PEDOT:PSS in terms of neuronal growth and synapse formation. We investigated neuronal morphology, density and electrical activity. We reported the novel observation that opposite to neurons, glial cell density was progressively reduced, hinting at the ability of this material to down regulate glial reaction. Thus PEDOT:PSS is an attractive candidate for the design of new implantable electrodes, controlling the extent of glial reactivity without affecting neuronal viability and function.

  12. Improving computer security by health smart card.

    Science.gov (United States)

    Nisand, Gabriel; Allaert, François-André; Brézillon, Régine; Isphording, Wilhem; Roeslin, Norbert

    2003-01-01

    The University hospitals of Strasbourg have worked for several years on the computer security of the medical data and have of this fact be the first to use the Health Care Professional Smart Card (CPS). This new tool must provide security to the information processing systems and especially to the medical data exchanges between the partners who collaborate to the care of the Beyond the purely data-processing aspects of the functions of safety offered by the CPS, safety depends above all on the practices on the users, their knowledge concerning the legislation, the risks and the stakes, of their adhesion to the procedures and protections installations. The aim of this study is to evaluate this level of knowledge, the practices and the feelings of the users concerning the computer security of the medical data, to check the relevance of the step taken, and if required, to try to improve it. The survey by questionnaires involved 648 users. The practices of users in terms of data security are clearly improved by the implementation of the security server and the use of the CPS system, but security breaches due to bad practices are not however completely eliminated. That confirms that is illusory to believe that data security is first and foremost a technical issue. Technical measures are of course indispensable, but the greatest efforts are required after their implementation and consist in making the key players [2], i.e. users, aware and responsible. However, it must be stressed that the user-friendliness of the security interface has a major effect on the results observed. For instance, it is highly probable that the bad practices continued or introduced upon the implementation of the security server and CPS scheme are due to the complicated nature or functional defects of the proposed solution, which must therefore be improved. Besides, this is only the pilot phase and card holders can be expected to become more responsible as time goes by, along with the gradual

  13. Wire Scanner Motion Control Card

    CERN Document Server

    Forde, S E

    2006-01-01

    Scientists require a certain beam quality produced by the accelerator rings at CERN. The discovery potential of LHC is given by the reachable luminosity at its interaction points. The luminosity is maximized by minimizing the beam size. Therefore an accurate beam size measurement is required for optimizing the luminosity. The wire scanner performs very accurate profile measurements, but as it can not be used at full intensity in the LHC ring, it is used for calibrating other profile monitors. As the current wire scanner system, which is used in the present CERN accelerators, has not been made for the required specification of the LHC, a new design of a wire scanner motion control card is part of the LHC wire scanner project. The main functions of this card are to control the wire scanner motion and to acquire the position of the wire. In case of further upgrades at a later stage, it is required to allow an easy update of the firmware, hence the programmable features of FPGAs will be used for this purpose. The...

  14. Surface tectonics of nanoporous networks of melamine-capped molecular building blocks formed through interface Schiff-base reactions.

    Science.gov (United States)

    Liu, Xuan-He; Wang, Dong; Wan, Li-Jun

    2013-10-01

    Control over the assembly of molecules on a surface is of great importance for the fabrication of molecule-based miniature devices. Melamine (MA) and molecules with terminal MA units are promising candidates for supramolecular interfacial packing patterning, owing to their multiple hydrogen-bonding sites. Herein, we report the formation of self-assembled structures of MA-capped molecules through a simple on-surface synthetic route. MA terminal groups were successfully fabricated onto rigid molecular cores with 2-fold and 3-fold symmetry through interfacial Schiff-base reactions between MA and aldehyde groups. Sub-molecular scanning tunneling microscopy (STM) imaging of the resultant adlayer revealed the formation of nanoporous networks. Detailed structural analysis indicated that strong hydrogen-bonding interactions between the MA groups persistently drove the formation of nanoporous networks. Herein, we demonstrate that functional groups with strong hydrogen-bond-formation ability are promising building blocks for the guided assembly of nanoporous networks and other hierarchical 2D assemblies. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. IGDS/TRAP Interface Program (ITIP). Detailed Design Specification (DDS). [network flow diagrams for coal gasification studies

    Science.gov (United States)

    Jefferys, S.; Johnson, W.; Lewis, R.; Rich, R.

    1981-01-01

    The software modules which comprise the IGDS/TRAP Interface Program are described. A hierarchical input processing output (HIPO) chart for each user command is given. The description consists of: (1) function of the user command; (2) calling sequence; (3) moduls which call this use command; (4) modules called by this user command; (5) IGDS commands used by this user command; and (6) local usage of global registers. Each HIPO contains the principal functions performed within the module. Also included with each function are a list of the inputs which may be required to perform the function and a list of the outputs which may be created as a result of performing the function.

  16. Smart Cards 101: Everything a Beginner Needs To Get Started.

    Science.gov (United States)

    Wiens, Janet

    2001-01-01

    Discusses how to implement a smart card system at a college or university, and explains what smart cards are, their potential applications, benefits, and costs. Provides a resource for obtaining additional information about smart cards. (GR)

  17. Real Communication through Interview and Conversation Cards

    Science.gov (United States)

    Bonin, Therese M.; Birckbichler, Diane W.

    1975-01-01

    A method for use in foreign language teaching which involves the use of conversation cards and interview cards is described. The method is intended to improve the ability of the student to communicate in the language and allow for greater individualization of instruction. (RM)

  18. College Student Performance and Credit Card Usage.

    Science.gov (United States)

    Pinto, Mary Beth; Parente, Diane H.; Palmer, Todd Starr

    2001-01-01

    Examines the relationship between credit card usage, employment, and academic performance among a group of college students with credit cards. Results reveal that the students differed significantly in the level of anxiety felt from carrying debt, perceived need to work, and perceived impact of employment on academic performance. (Contains 57…

  19. Mammography screening credit card and compliance.

    Science.gov (United States)

    Schapira, D V; Kumar, N B; Clark, R A; Yag, C

    1992-07-15

    Screening for breast cancer using mammography has been shown to be effective in reducing mortality from breast cancer. The authors attempted to determine if use of a wallet-size plastic screening "credit" card would increase participants' compliance for subsequent mammograms when compared with traditional methods of increasing compliance. Two hundred and twenty consecutive women, ages 40-70 years, undergoing their first screening mammography were recruited and assigned randomly to four groups receiving (1) a reminder plastic credit card (2) reminder credit card with written reminder; (3) appointment card; and (4) verbal recommendation. Return rates of the four groups were determined after 15 months. The return rate for subsequent mammograms was significantly higher for participants (72.4%) using the credit card than for participants (39.8%) exposed to traditional encouragement/reminders (P less than 0.0001). The credit card was designed to show the participant's screening anniversary, and the durability of the card may have been a factor in increasing the return rate. The use of reminder credit cards may increase compliance for periodic screening examinations for other cancers and other chronic diseases.

  20. Establishing a Successful Smart Card Program.

    Science.gov (United States)

    Wiens, Janet

    2001-01-01

    Discusses how to run a successful smart card program through a comprehensive approach that includes a detailed plan for the present and future, high level support from school administration, and extensive user input. Florida State University is used to illustrate a successfully implemented smart card program. (GR)

  1. Enhancing Students' Learning: Instant Feedback Cards

    Science.gov (United States)

    Mohrweis, Lawrence C.; Shinham, Kathe M.

    2015-01-01

    This study illustrates an active learning approach using instant feedback cards in the first course in accounting. The objectives of this study are to (1) describe instant feedback cards and (2) show how this tool, when used in an active learning environment, can enhance learning. We examined whether students exposed to immediate feedback…

  2. Overcoming credit card fraud in South Africa

    African Journals Online (AJOL)

    A credit card is a convenient method of payment, but it does carry risks. The enormous ... Identity theft and the exponential ... Unique Security Features of a Credit Card with the Aim of Identifying ..... technology in an attempt to try and curb the.

  3. Re-Designing Business Card Advertisements.

    Science.gov (United States)

    Schaub, Laura

    2001-01-01

    Discusses ways to turn information from a business card into an advertisement to be placed in a student publication. Addresses visual interest, typography, and other design issues. Includes several sample advertisements and a classroom activity involving redesigning a business card into an advertisement. (RS)

  4. Fingerprint matching on smart card: A review

    CSIR Research Space (South Africa)

    Baruni, Kedimotse P

    2016-12-01

    Full Text Available Fingerprint Match-on-Card (MoC) offers the highest degree of privacy and security to cardholders as the fingerprint never leaves the secure environment of a smart card. The level of security of a biometric system is evaluated by the location where...

  5. Comparative Study of the New Colorimetric VITEK 2 Yeast Identification Card versus the Older Fluorometric Card and of CHROMagar Candida as a Source Medium with the New Card

    OpenAIRE

    Aubertine, C. L.; Rivera, M.; Rohan, S. M.; Larone, D. H.

    2006-01-01

    The new VITEK 2 colorimetric card was compared to the previous fluorometric card for identification of yeast. API 20C was considered the “gold standard.” The new card consistently performed better than the older card. Isolates from CHROMagar Candida plates were identified equally as well as those from Sabouraud dextrose agar.

  6. Prepaid cards: how do they function? how are they regulated?

    OpenAIRE

    Mark Furletti

    2004-01-01

    This conference, sponsored by the Payment Cards Center, brought together prepaid card industry leaders and regulators to discuss how various prepaid-card systems work and the ways in which different state and federal laws can affect them. The conference featured sessions on bank- and merchant-issued gift cards, payroll cards, and flexible spending account cards. It also featured presentations by experts on Regulation E, the Federal Deposit Insurance Act, state money transmitter laws, and stat...

  7. Point card compatible automatic vending machine for canned drink; Point card taio kan jido hanbaiki

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-01-10

    A point card compatible automatic vending machine for canned drinks is developed, which provides drink manufacturers with a powerful tool to acquire selling sites and attract consumers. Since the machine is equipped with a device to handle point cards, regular customers have increased and sales have picked up. A point card issuing device is also installed, and the new machine issues a point card whenever a customer wants. The drink manufacturers are evaluating high of the vending machine because it will contribute to the diffusion of the point card system and because a sales promotion campaign may be conducted through the vending machine for instance by exchanging a fully marked card with a giveaway on the spot. In the future, a bill validator (paper money identifier) will be integrated even with small size machines for the diffusion of point card compatible machines. (translated by NEDO)

  8. Synthesis of Variable Harmonic Impedance in Inverter-Interfaced Distributed Generation Unit for Harmonic Damping Throughout a Distribution Network

    DEFF Research Database (Denmark)

    Wang, Xiongfei; Blaabjerg, Frede; Chen, Zhe

    2012-01-01

    This paper proposes a harmonic impedance synthesis technique for voltage-controlled distributed generation inverters in order to damp harmonic voltage distortion on a distribution network. The approach employs a multiloop control scheme, where a selective harmonic load current feedforward loop...... at the dominant harmonic frequencies. Thus, the harmonic voltage drop on the grid-side inductance and the harmonic resonances throughout a distribution feeder with multiple shunt-connected capacitors can be effectively attenuated. Simulation and laboratory test results validate the performance of the proposed...

  9. FELIX: a PCIe based high-throughput approach for interfacing front-end and trigger electronics in the ATLAS Upgrade framework

    Science.gov (United States)

    Anderson, J.; Bauer, K.; Borga, A.; Boterenbrood, H.; Chen, H.; Chen, K.; Drake, G.; Dönszelmann, M.; Francis, D.; Guest, D.; Gorini, B.; Joos, M.; Lanni, F.; Lehmann Miotto, G.; Levinson, L.; Narevicius, J.; Panduro Vazquez, W.; Roich, A.; Ryu, S.; Schreuder, F.; Schumacher, J.; Vandelli, W.; Vermeulen, J.; Whiteson, D.; Wu, W.; Zhang, J.

    2016-12-01

    The ATLAS Phase-I upgrade (2019) requires a Trigger and Data Acquisition (TDAQ) system able to trigger and record data from up to three times the nominal LHC instantaneous luminosity. The Front-End LInk eXchange (FELIX) system provides an infrastructure to achieve this in a scalable, detector agnostic and easily upgradeable way. It is a PC-based gateway, interfacing custom radiation tolerant optical links from front-end electronics, via PCIe Gen3 cards, to a commodity switched Ethernet or InfiniBand network. FELIX enables reducing custom electronics in favour of software running on commercial servers. The FELIX system, the design of the PCIe prototype card and the integration test results are presented in this paper.

  10. FELIX: a PCIe based high-throughput approach for interfacing front-end and trigger electronics in the ATLAS Upgrade framework

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00015561; Bauer, Kevin Thomas; Borga, Andrea; Boterenbrood, Henk; Chen, Hucheng; Chen, Kai; Drake, Gary; Donszelmann, Mark; Francis, David; Guest, Daniel; Gorini, Benedetto; Joos, Markus; Lanni, Francesco; Lehmann Miotto, Giovanna; Levinson, Lorne; Narevicius, Julia; Panduro Vazquez, William; Roich, Alexander; Ryu, Soo; Schreuder, Frans Philip; Schumacher, Jorn; Vandelli, Wainer; Vermeulen, Jos; Whiteson, Daniel; Wu, Weihao; Zhang, Jinlong

    2016-01-01

    The ATLAS Phase-I upgrade (2018) requires a Trigger and Data Acquisition (TDAQ) system able to trigger and record data from up to three times the nominal LHC instantaneous luminosity. The Front-End LInk eXchange (FELIX) system provides an infrastructure to achieve this in a scalable, detector agnostic and easily upgradeable way. It is a PC-based gateway, interfacing custom radiation tolerant optical links from front-end electronics, via FPGA PCIe Gen3 cards, to a commodity switched Ethernet or InfiniBand network. FELIX enables reducing custom electronics in favour of software running on commercial servers. The FELIX system, the design of the PCIe prototype card and the integration test results are presented in this paper.

  11. FELIX: a PCIe based high-throughput approach for interfacing front-end and trigger electronics in the ATLAS Upgrade framework

    International Nuclear Information System (INIS)

    Anderson, J.; Drake, G.; Ryu, S.; Bauer, K.; Guest, D.; Borga, A.; Boterenbrood, H.; Schreuder, F.; Chen, H.; Chen, K.; Lanni, F.; Dönszelmann, M.; Francis, D.; Gorini, B.; Joos, M.; Miotto, G. Lehmann; Levinson, L.; Narevicius, J.; Roich, A.; Vazquez, W. Panduro

    2016-01-01

    The ATLAS Phase-I upgrade (2019) requires a Trigger and Data Acquisition (TDAQ) system able to trigger and record data from up to three times the nominal LHC instantaneous luminosity. The Front-End LInk eXchange (FELIX) system provides an infrastructure to achieve this in a scalable, detector agnostic and easily upgradeable way. It is a PC-based gateway, interfacing custom radiation tolerant optical links from front-end electronics, via PCIe Gen3 cards, to a commodity switched Ethernet or InfiniBand network. FELIX enables reducing custom electronics in favour of software running on commercial servers. The FELIX system, the design of the PCIe prototype card and the integration test results are presented in this paper.

  12. PDA-phone-based instant transmission of radiological images over a CDMA network by combining the PACS screen with a Bluetooth-interfaced local wireless link.

    Science.gov (United States)

    Kim, Dong Keun; Yoo, Sun K; Park, Jeong Jin; Kim, Sun Ho

    2007-06-01

    Remote teleconsultation by specialists is important for timely, correct, and specialized emergency surgical and medical decision making. In this paper, we designed a new personal digital assistant (PDA)-phone-based emergency teleradiology system by combining cellular communication with Bluetooth-interfaced local wireless links. The mobility and portability resulting from the use of PDAs and wireless communication can provide a more effective means of emergency teleconsultation without requiring the user to be limited to a fixed location. Moreover, it enables synchronized radiological image sharing between the attending physician in the emergency room and the remote specialist on picture archiving and communication system terminals without distorted image acquisition. To enable rapid and fine-quality radiological image transmission over a cellular network in a secure manner, progressive compression and security mechanisms have been incorporated. The proposed system is tested over a code division Multiple Access 1x-Evolution Data-Only network to evaluate the performance and to demonstrate the feasibility of this system in a real-world setting.

  13. Insider protection: A report card

    International Nuclear Information System (INIS)

    Al-Ayat, R.A.; Judd, B.R.

    1986-01-01

    Enhanced security measures against external threats (e.g., terrorists, criminals) have been implemented at most facilities that handle special nuclear material, classified information, or other assets critical to national security. Attention is now focusing on insider protection, and safeguards managers are attempting to provide balanced protection against insider and outsider threats. Potential insider threats include attempts by facility employees to steal special nuclear material (SNM), to cause a radiological hazard to the public, to sabotage critical facilities, or to steal property or classified information. This paper presents a report card on the status of insider protection at Department of Energy and Nuclear Regulatory Commission-licensed facilities, with emphasis on SNM theft. The authors discuss the general trends in insider protection and the limitations of protection measures currently in use. They also discuss the most critical needs for improved procedures, technology, analytical tools, and education for safeguards personnel

  14. Insider protection: a report card

    International Nuclear Information System (INIS)

    Al-Ayat, R.A.; Judd, B.R.

    1986-01-01

    Enhanced security measures against external threats (e.g., terrorists, criminals) have been implemented at most facilities that handle special nuclear material, classified information, or other assets critical to national security. Attention is not focussing on insider protection, and safeguards managers are attempting to provide balanced protection against insider and outsider threats. Potential insider threats include attempts by facility employees to steal special nuclear material (SNM), to cause a radiological hazard to the public, to sabotage critical facilities, or to steal property or classified information. This paper presents a report card on the status of insider protection at Department of Energy and Nuclear Regulatory Commission-licensed facilities, with emphasis on SNM theft. We discuss the general trends in insider protection and the limitations of protection measures currently in use. We also discuss the most critical needs for improved procedures, technology, analytical tools, and education for safeguards personnel

  15. Card - Electronic Money. Comparative Study

    Directory of Open Access Journals (Sweden)

    Mariana Rodica TIRLEA

    2012-11-01

    Full Text Available This type of coin and appeared as a result of the needs for a proper management of the financial resources available in the market, but also to improve the payments system in our country. The card is an alternative to the conventional instruments of payment is a payment instrument with and without cash by means of which the holder disposes of the current account. It is a standardized, secure information and individualized, through which you can perform operations of cash withdrawal, payment for the goods or services purchased, payment obligations by the public administration authorities and funds transfers between accounts, other than those ordered and executed by financial institutions, carried out through the electronic payment instrument.

  16. Design of eight-channel ADC card for GHz signal conversion

    CERN Document Server

    Habib, Samer Bou; Jalmuzna, Wojciech; Jezynski, Tomasz

    2011-01-01

    This paper describes the design of an eight-channel ATCA card suited for direct analog-to-digital conversion of 1.3 GHz signals with a maximum ADC clock frequency of 500 MHz. The undersampling operation is used for signal conversion. This card was designed for the needs of the LLRF system of the FLASH and XFEL accelerators. The designed module consists of a main ATCA board with eight ADCs, FPGA unit, memory, power supply and diagnostic circuits. The main ATCA card allows connecting a daughter board with IPMI, CPU and fast interfaces for communication purposes. This paper describes such issues as system organization allowing acquisition of data at such high data rates, circuit synchronization by high-quality clock signals, CPU and connectivity features, 20-layer PCB design and techniques used for high-frequency signals transmission and matching.

  17. Design and implementation of reliability evaluation of SAS hard disk based on RAID card

    Science.gov (United States)

    Ren, Shaohua; Han, Sen

    2015-10-01

    Because of the huge advantage of RAID technology in storage, it has been widely used. However, the question associated with this technology is that the hard disk based on the RAID card can not be queried by Operating System. Therefore how to read the self-information and log data of hard disk has been a problem, while this data is necessary for reliability test of hard disk. In traditional way, this information can be read just suitable for SATA hard disk, but not for SAS hard disk. In this paper, we provide a method by using LSI RAID card's Application Program Interface, communicating with RAID card and analyzing the feedback data to solve the problem. Then we will get the necessary information to assess the SAS hard disk.

  18. DATA MINING APPLICATION IN CREDIT CARD FRAUD DETECTION SYSTEM

    Directory of Open Access Journals (Sweden)

    FRANCISCA NONYELUM OGWUELEKA

    2011-06-01

    Full Text Available Data mining is popularly used to combat frauds because of its effectiveness. It is a well-defined procedure that takes data as input and produces models or patterns as output. Neural network, a data mining technique was used in this study. The design of the neural network (NN architecture for the credit card detection system was based on unsupervised method, which was applied to the transactions data to generate four clusters of low, high, risky and high-risk clusters. The self-organizing map neural network (SOMNN technique was used for solving the problem of carrying out optimal classification of each transaction into its associated group, since a prior output is unknown. The receiver-operating curve (ROC for credit card fraud (CCF detection watch detected over 95% of fraud cases without causing false alarms unlike other statistical models and the two-stage clusters. This shows that the performance of CCF detection watch is in agreement with other detection software, but performs better.

  19. Towards non-repudiable authentication through biometrics and smart cards

    CSIR Research Space (South Africa)

    Msiza, I

    2012-10-01

    Full Text Available ? biometrics and smart cards Part B: Biometrics ? CSIR 2012 Slide 7 Biometric Authentication ? CSIR 2012 Slide 8 ? A science that uses a person?s behavioral and/or physiological traits to establish their identify, or verify their claimed identity.../or characteristics of some thing ? This thing can be anything, however in the context of this discussion, this thing could be a person, a network device, or even an identity authentication device itself ? This act or process of verifying these attributes could...

  20. A microprocessor card software server to support the Quebec health microprocessor card project.

    Science.gov (United States)

    Durant, P; Bérubé, J; Lavoie, G; Gamache, A; Ardouin, P; Papillon, M J; Fortin, J P

    1995-01-01

    The Quebec Health Smart Card Project is advocating the use of a memory card software server[1] (SCAM) to implement a portable medical record (PMR) on a smart card. The PMR is viewed as an object that can be manipulated by SCAM's services. In fact, we can talk about a pseudo-object-oriented approach. This software architecture provides a flexible and evolutive way to manage and optimize the PMR. SCAM is a generic software server; it can manage smart cards as well as optical (laser) cards or other types of memory cards. But, in the specific case of the Quebec Health Card Project, SCAM is used to provide services between physicians' or pharmacists' software and IBM smart card technology. We propose to expose the concepts and techniques used to provide a generic environment to deal with smart cards (and more generally with memory cards), to obtain a dynamic an evolutive PMR, to raise the system global security level and the data integrity, to optimize significantly the management of the PMR, and to provide statistic information about the use of the PMR.

  1. Latest developments for a computer aided thermohydraulic network

    International Nuclear Information System (INIS)

    Alemberti, A.; Graziosi, G.; Mini, G.; Susco, M.

    1999-01-01

    Thermohydraulic networks are I-D systems characterized by a small number of basic components (pumps, valves, heat exchangers, etc) connected by pipes and limited spatially by a defined number of boundary conditions (tanks, atmosphere, etc). The network system is simulated by the well known computer program RELAPS/mod3. Information concerning the network geometry component behaviour, initial and boundary conditions are usually supplied to the RELAPS code using an ASCII input file by means of 'input cards'. CATNET (Computer Aided Thermalhydraulic NETwork) is a graphically user interface that, under specific user guidelines which completely define its range of applicability, permits a very high level of standardization and simplification of the RELAPS/mod3 input deck development process as well as of the output processing. The characteristics of the components (pipes, valves, pumps etc), defining the network system can be entered through CATNET. The CATNET interface is provided by special functions to compute form losses in the most typical bending and branching configurations. When the input of all system components is ready, CATNET is able to generate the RELAPS/mod3 input file. Finally, by means of CATNET, the RELAPS/mod3 code can be run and its output results can be transformed to an intuitive display form. The paper presents an example of application of the CATNET interface as well as the latest developments which greatly simplified the work of the users and allowed to reduce the possibility of input errors. (authors)

  2. Spectroscopic Evidence for a H Bond Network at Y356 Located at the Subunit Interface of Active E. coli Ribonucleotide Reductase.

    Science.gov (United States)

    Nick, Thomas U; Ravichandran, Kanchana R; Stubbe, JoAnne; Kasanmascheff, Müge; Bennati, Marina

    2017-07-18

    The reaction catalyzed by E. coli ribonucleotide reductase (RNR) composed of α and β subunits that form an active α2β2 complex is a paradigm for proton-coupled electron transfer (PCET) processes in biological transformations. β2 contains the diferric tyrosyl radical (Y 122 ·) cofactor that initiates radical transfer (RT) over 35 Å via a specific pathway of amino acids (Y 122 · ⇆ [W 48 ] ⇆ Y 356 in β2 to Y 731 ⇆ Y 730 ⇆ C 439 in α2). Experimental evidence exists for colinear and orthogonal PCET in α2 and β2, respectively. No mechanistic model yet exists for the PCET across the subunit (α/β) interface. Here, we report unique EPR spectroscopic features of Y 356 ·-β, the pathway intermediate generated by the reaction of 2,3,5-F 3 Y 122 ·-β2/CDP/ATP with wt-α2, Y 731 F-α2, or Y 730 F-α2. High field EPR (94 and 263 GHz) reveals a dramatically perturbed g tensor. [ 1 H] and [ 2 H]-ENDOR reveal two exchangeable H bonds to Y 356 ·: a moderate one almost in-plane with the π-system and a weak one. DFT calculation on small models of Y· indicates that two in-plane, moderate H bonds (r O-H ∼1.8-1.9 Å) are required to reproduce the g x value of Y 356 · (wt-α2). The results are consistent with a model, in which a cluster of two, almost symmetrically oriented, water molecules provide the two moderate H bonds to Y 356 · that likely form a hydrogen bond network of water molecules involved in either the reversible PCET across the subunit interface or in H + release to the solvent during Y 356 oxidation.

  3. The Social Meanings of the C-Card Scheme: The Importance of Friends and Peers

    Science.gov (United States)

    Cheetham, Mandy

    2014-01-01

    This paper draws on findings from an analysis of interviews with young people aged 14-18 years, to explore the peer influences in young people's informal social networks which can affect their access to sexual health services. The research focuses on the social meanings of a C-Card condom distribution scheme in North East England. Such schemes are…

  4. SD card projects using the PIC microcontroller

    CERN Document Server

    Ibrahim, Dogan

    2010-01-01

    PIC Microcontrollers are a favorite in industry and with hobbyists. These microcontrollers are versatile, simple, and low cost making them perfect for many different applications. The 8-bit PIC is widely used in consumer electronic goods, office automation, and personal projects. Author, Dogan Ibrahim, author of several PIC books has now written a book using the PIC18 family of microcontrollers to create projects with SD cards. This book is ideal for those practicing engineers, advanced students, and PIC enthusiasts that want to incorporate SD Cards into their devices. SD cards are che

  5. Insuficiencia cardíaca y diabetes

    OpenAIRE

    Jorge Thierer

    2006-01-01

    La prevalencia de la insuficiencia cardíaca y la diabetes continúa creciendo. Ambas están fuertemente asociadas. La diabetes es un fuerte predictor de aparición de insuficiencia cardíaca. Las razones son la presencia de enfermedad coronaria y los trastornos metabólicos vinculados con la resistencia a la insulina que generan disfunción contráctil. Los pacientes con insuficiencia cardíaca que son diabéticos tienen peor evolución. Los Betabloqueantes, vasodilatadores y los inhibidores de la en...

  6. Insuficiencia cardíaca y diabetes

    OpenAIRE

    Thierer, Jorge

    2006-01-01

    La prevalencia de la insuficiencia cardíaca y la diabetes continúa creciendo. Ambas están fuertemente asociadas. La diabetes es un fuerte predictor de aparición de insuficiencia cardíaca. Las razones son la presencia de enfermedad coronaria y los trastornos metabólicos vinculados con la resistencia a la insulina que generan disfunción contráctil. Los pacientes con insuficiencia cardíaca que son diabéticos tienen peor evolución. Los betabloqueantes vasodilatadores y los inhibidores de la enzim...

  7. 'Smart card' speeds triage, boosts safety.

    Science.gov (United States)

    2008-10-01

    An internally developed 'smart card' and a kiosk equipped with an electronic reader have helped Wellington (FL) Regional Medical Center speed up its triage process considerably. The new technology is extremely popular with the staff, as well as with the patients. Here are some of its benefits: Patients who have the card don't need to provide a detailed history every time they visit the ED. Nurses don't have to type in the patient's medical information. It automatically "populates" their computer screen. Security is maintained, because the information is stored in a database, and not on the card.

  8. Loyalty Card Promotional Activity in Budget Hotel

    OpenAIRE

    Teng, Fei

    2010-01-01

    Loyalty card is one of the most commonly used promotional activities in business. Thus far, there are some research has been done on luxury hotel, but very few researches are on budget hotel. So, the purpose of the thesis is finding out the Swedish customers’ attitude and behavior towards budget hotel’s loyalty card; getting to know what factors influence Swedish customers’ response towards the loyalty card and budget hotels. In the thesis, the main research problem is “How do Swedish custome...

  9. Opto-electronic DNA chip-based integrated card for clinical diagnostics.

    Science.gov (United States)

    Marchand, Gilles; Broyer, Patrick; Lanet, Véronique; Delattre, Cyril; Foucault, Frédéric; Menou, Lionel; Calvas, Bernard; Roller, Denis; Ginot, Frédéric; Campagnolo, Raymond; Mallard, Frédéric

    2008-02-01

    Clinical diagnostics is one of the most promising applications for microfluidic lab-on-a-chip or lab-on-card systems. DNA chips, which provide multiparametric data, are privileged tools for genomic analysis. However, automation of molecular biology protocol and use of these DNA chips in fully integrated systems remains a great challenge. Simplicity of chip and/or card/instrument interfaces is amongst the most critical issues to be addressed. Indeed, current detection systems for DNA chip reading are often complex, expensive, bulky and even limited in terms of sensitivity or accuracy. Furthermore, for liquid handling in the lab-on-cards, many devices use complex and bulky systems, either to directly manipulate fluids, or to ensure pneumatic or mechanical control of integrated valves. All these drawbacks prevent or limit the use of DNA-chip-based integrated systems, for point-of-care testing or as a routine diagnostics tool. We present here a DNA-chip-based protocol integration on a plastic card for clinical diagnostics applications including: (1) an opto-electronic DNA-chip, (2) fluid handling using electrically activated embedded pyrotechnic microvalves with closing/opening functions. We demonstrate both fluidic and electric packaging of the optoelectronic DNA chip without major alteration of its electronical and biological functionalities, and fluid control using novel electrically activable pyrotechnic microvalves. Finally, we suggest a complete design of a card dedicated to automation of a complex biological protocol with a fully electrical fluid handling and DNA chip reading.

  10. Acorn: A grid computing system for constraint based modeling and visualization of the genome scale metabolic reaction networks via a web interface

    Directory of Open Access Journals (Sweden)

    Bushell Michael E

    2011-05-01

    Full Text Available Abstract Background Constraint-based approaches facilitate the prediction of cellular metabolic capabilities, based, in turn on predictions of the repertoire of enzymes encoded in the genome. Recently, genome annotations have been used to reconstruct genome scale metabolic reaction networks for numerous species, including Homo sapiens, which allow simulations that provide valuable insights into topics, including predictions of gene essentiality of pathogens, interpretation of genetic polymorphism in metabolic disease syndromes and suggestions for novel approaches to microbial metabolic engineering. These constraint-based simulations are being integrated with the functional genomics portals, an activity that requires efficient implementation of the constraint-based simulations in the web-based environment. Results Here, we present Acorn, an open source (GNU GPL grid computing system for constraint-based simulations of genome scale metabolic reaction networks within an interactive web environment. The grid-based architecture allows efficient execution of computationally intensive, iterative protocols such as Flux Variability Analysis, which can be readily scaled up as the numbers of models (and users increase. The web interface uses AJAX, which facilitates efficient model browsing and other search functions, and intuitive implementation of appropriate simulation conditions. Research groups can install Acorn locally and create user accounts. Users can also import models in the familiar SBML format and link reaction formulas to major functional genomics portals of choice. Selected models and simulation results can be shared between different users and made publically available. Users can construct pathway map layouts and import them into the server using a desktop editor integrated within the system. Pathway maps are then used to visualise numerical results within the web environment. To illustrate these features we have deployed Acorn and created a

  11. Interface Consistency

    DEFF Research Database (Denmark)

    Staunstrup, Jørgen

    1998-01-01

    This paper proposes that Interface Consistency is an important issue for the development of modular designs. Byproviding a precise specification of component interfaces it becomes possible to check that separately developedcomponents use a common interface in a coherent matter thus avoiding a very...... significant source of design errors. Awide range of interface specifications are possible, the simplest form is a syntactical check of parameter types.However, today it is possible to do more sophisticated forms involving semantic checks....

  12. Interface models

    DEFF Research Database (Denmark)

    Ravn, Anders P.; Staunstrup, Jørgen

    1994-01-01

    This paper proposes a model for specifying interfaces between concurrently executing modules of a computing system. The model does not prescribe a particular type of communication protocol and is aimed at describing interfaces between both software and hardware modules or a combination of the two....... The model describes both functional and timing properties of an interface...

  13. The Front-End Concentrator card for the RD51 Scalable Readout System

    International Nuclear Information System (INIS)

    Toledo, J; Esteve, R; Monzó, J M; Tarazona, A; Muller, H; Martoiu, S

    2011-01-01

    Conventional readout systems exist in many variants since the usual approach is to build readout electronics for one given type of detector. The Scalable Readout System (SRS) developed within the RD51 collaboration relaxes this situation considerably by providing a choice of frontends which are connected over a customizable interface to a common SRS DAQ architecture. This allows sharing development and production costs among a large base of users as well as support from a wide base of developers. The Front-end Concentrator card (FEC), a RD51 common project between CERN and the NEXT Collaboration, is a reconfigurable interface between the SRS online system and a wide range of frontends. This is accomplished by using application-specific adapter cards between the FEC and the frontends. The ensemble (FEC and adapter card are edge mounted) forms a 6U × 220 mm Eurocard combo that fits on a 19'' subchassis. Adapter cards exist already for the first applications and more are in development.

  14. FELIX: the new detector interface for the ATLAS experiment

    CERN Document Server

    Wu, Weihao; The ATLAS collaboration

    2018-01-01

    During the next major shutdown (2019-2020), the ATLAS experiment at the LHC at CERN will adopt the Front-End Link eXchange (FELIX) system as the interface between the data acquisition, detector control and TTC (Timing, Trigger and Control) systems and new or updated trigger and detector front-end electronics. FELIX will function as a router between custom serial links from front-end ASICs and FPGAs to data collection and processing components via a commodity switched network. Links may aggregate many slower links or be a single high bandwidth link. FELIX will also forward the LHC bunch-crossing clock, fixed latency trigger accepts and resets received from the TTC system to front-end electronics. The FELIX system uses commodity server technology in combination with FPGA-based PCIe I/O cards. The FELIX servers will run a software routing platform serving data to network clients. Commodity servers connected to FELIX systems via the same network will run the new Software Readout Driver (SW ROD) infrastructure for...

  15. FELIX: the New Detector Interface for the ATLAS Experiment

    CERN Document Server

    Aggarwal, Anamika; The ATLAS collaboration

    2018-01-01

    During the next major shutdown (2019-2020), the ATLAS experiment at the LHC will adopt the Front-End Link eXchange (FELIX) system as the interface between the data acquisition, detector control and TTC (Timing, Trigger and Control) systems and new or updated trigger and detector front-end electronics. FELIX will function as a router between custom serial links from front-end ASICs and FPGAs to data collection and processing components via a commodity switched network. Links may aggregate many slower links or be a single high bandwidth link. FELIX will also forward the LHC bunch-crossing clock, fixed latency trigger accepts and resets received from the TTC system to front-end electronics. The FELIX system uses commodity server technology in combination with FPGA-based PCIe I/O cards. The FELIX servers will run a software routing platform serving data to network clients. Commodity servers connected to FELIX systems via the same network will run the new Software Readout Driver (SW ROD) infrastructure for event f...

  16. 12 CFR 226.12 - Special credit card provisions.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Special credit card provisions. 226.12 Section... SYSTEM TRUTH IN LENDING (REGULATION Z) Open-End Credit § 226.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including...

  17. Fingerprint match-on-card: review and outlook

    CSIR Research Space (South Africa)

    Shabalala, MB

    2015-03-01

    Full Text Available the statistics on identity theft. This has been achieved by predominantly implementing biometrics matching algorithms inside smart card technology. The biometric matching inside a smart card is known as Match-on-Card/On-Card comparison. However compared...

  18. 75 FR 81721 - Debit Card Interchange Fees and Routing

    Science.gov (United States)

    2010-12-28

    ... cards not marketed or labeled as a gift card or certificate. EFTA Section 920 provides, however, that... cardholder initiates a purchase by providing his or her card or card information to a merchant. In the case... purchases at retailers in the early 1980s. It was not until the mid-1990s, however, that PIN debit became a...

  19. Student ID Cards: What You Should Know About Them

    Science.gov (United States)

    Hoffman, Jonathan; McGuire, Agnes C.

    1973-01-01

    Discusses the usefulness of photo ID cards for school security purposes, library control, student activities, and bus transportation control. Examines ways in which card costs can be reduced and the pros and cons of producing the cards at the school or of letting the work out. Problems involving card abuse and student rights are also considered.…

  20. EuCARD2: enhanced accelerator research and development in Europe

    Science.gov (United States)

    Romaniuk, Ryszard S.

    2013-10-01

    Accelerator science and technology is one of a key enablers of the developments in the particle physic, photon physics and also applications in medicine and industry. EuCARD2 is an European research project which will be realized during 2013-2017 inside the EC FP7 framework. The project concerns the development and coordination of European Accelerator Research and Development. The project is particularly important, to a number of domestic laboratories, due to some plans to build large accelerator infrastructure in Poland. Large accelerator infrastructure of fundamental and applied research character stimulates around it the development and industrial applications as well as biomedical of advanced accelerators, material research and engineering, cryo-technology, mechatronics, robotics, and in particular electronics - like networked measurement and control systems, sensors, computer systems, automation and control systems. The paper presents a digest of the European project EuCARD2 which is Enhanced European Coordination for Accelerator Research and Development. The paper presents a digest of the research results and assumptions in the domain of accelerator science and technology in Europe, shown during the final fourth annual meeting of the EuCARD - European Coordination of Accelerator R&D, and the kick-off meeting of the EuCARD2. There are debated a few basic groups of accelerator systems components like: measurement - control networks of large geometrical extent, multichannel systems for large amounts of metrological data acquisition, precision photonic networks of reference time, frequency and phase distribution, high field magnets, superconducting cavities, novel beam collimators, etc. The paper bases on the following materials: Internet and Intranet documents combined with EuCARD2, Description of Work FP7 EuCARD-2 DoW-312453, 2013-02-13, and discussions and preparatory materials worked on by Eucard-2 initiators.

  1. Notification: Purchase Card and Convenience Check Audit

    Science.gov (United States)

    Project #OA-FY13-0116, April 11, 2013. The U.S. Environmental Protection Agency, Office of Inspector General, is beginning the fieldwork phase of its audit of the agency’s purchase card and convenience check programs.

  2. Prefrontal system dysfunction and credit card debt.

    Science.gov (United States)

    Spinella, Marcello; Yang, Bijou; Lester, David

    2004-10-01

    Credit card use often involves a disadvantageous allocation of finances because they allow for spending beyond means and buying on impulse. Accordingly they are associated with increased bankruptcy, anxiety, stress, and health problems. Mounting evidence from functional neuroimaging and clinical studies implicates prefrontal-subcortical systems in processing financial information. This study examined the relationship of credit card debt and executive functions using the Frontal System Behavior Scale (FRSBE). After removing the influences of demographic variables (age, sex, education, and income), credit card debt was associated with the Executive Dysfunction scale, but not the Apathy or Disinhibition scales. This suggests that processes of conceptualizing and organizing finances are most relevant to credit card debt, and implicates dorsolateral prefrontal dysfunction.

  3. College Student Credit Card Usage and Debt.

    Science.gov (United States)

    Rybka, Kathryn M.

    2001-01-01

    Provides an overview of the concerns related to credit card usage by college students. Offers information student affairs professionals can use to help college students make responsible choices. (Contains 26 references.) (GCP)

  4. 25 CFR 249.3 - Identification cards.

    Science.gov (United States)

    2010-04-01

    ... the issuance of an appropriate identification card to any Indian entitled thereto as prima facie... any Federal, State, or tribal enforcement officer shall be prima facie evidence that the person is not...

  5. FRENCH CARDS - NEW PROCEDURE FOR INITIAL APPLICATION

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Human Resources Division would like to remind members of personnel that they are obliged to submit an application form for a French card as soon as they have a permanent address in either Switzerland or in France and they are actually living there. Following the rationalization of our administrative procedures, as of October 1st, 2002, the initial application procedure for a French card will now be as follows: The member of personnel should complete an application form. If necessary, an application form must also be completed for family members. These forms must then be transferred via e-mail to the appropriate Divisional Administrative Officer (DAO) who will forward them to the Cards Service. In parallel, the member of personnel should submit the necessary supporting documents to the Cards Service. The application form (Word format only), the procedural details, the necessary supporting documents as well as the conditions of issue are available here.   Human Resources Division Tel. 74469

  6. An Improved Timestamp-Based Password Authentication Scheme Using Smart Cards

    OpenAIRE

    Pathan, Al-Sakib Khan; Hong, Choong Seon

    2007-01-01

    With the recent proliferation of distributed systems and networking, remote authentication has become a crucial task in many networking applications. Various schemes have been proposed so far for the two-party remote authentication; however, some of them have been proved to be insecure. In this paper, we propose an efficient timestamp-based password authentication scheme using smart cards. We show various types of forgery attacks against a previously proposed timestamp-based password authenti...

  7. Software for a multichannel acquisition card

    International Nuclear Information System (INIS)

    Arista Romeu, E. J.; Diaz Garcia, A.; Vela Morales, O.

    2013-01-01

    A software developed in C++ for a multichannel acquisition card is presented. The use of an acquisition add-on card with multiple channels is a suitable solution to substitute several instruments, allowing simultaneous acquisition with each channel. In this work, the limitations of a concrete hardware are discussed and also several different approaches have been suggested. Some preliminary results obtained in laboratory conditions are shown. (Author)

  8. Smart Card Security; Technology and Adoption

    OpenAIRE

    Hamed Taherdoost; Shamsul Sahibuddin; Neda Jalaliyoon

    2011-01-01

    Newly, smart card technology are being used in a number of ways around the world, on the otherhand, security has become significant in information technology, especially in those applicationinvolving data sharing and transactions through the internet. Furthermore, researches ininformation technology acceptance have identified the security as one of the factor that caninfluence on smart card adoption. This research is chiefly to study the security principals of smartcard and assess the securit...

  9. Pc Card Sony Ericsson: Semiotik Dan Iklan

    OpenAIRE

    Mutmainnah, Yulia

    2014-01-01

    Through advertisement, producers send messages for their product strength to consumers. Those messages are conveyed through various kinds of signs either in the form of language, picture, caption, icon, index, or symbol. There is communicative exchange on GC79 PC Card Sony Ericsson advertisement between sender and receiver. Sender (advertisement maker) of this advertisement makes good use of reward polluter style, which is, persuading comsumers to use PC Card Sony Ericsson product.

  10. Prototype ALICE front-end card

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    This circuit board is a prototype 48-channel front end digitizer card for the ALICE time projection chamber (TPC), which takes electrical signals from the wire sensors in the TPC and shapes the data before converting the analogue signal to digital data. A total of 4356 cards will be required to process the data from the ALICE TPC, the largest of this type of detector in the world.

  11. Implementation of a Single-Phase SST for the Interface between a 13.2 kV MVAC Network and a 750 V Bipolar DC Distribution

    Directory of Open Access Journals (Sweden)

    Hyeok-Jin Yun

    2018-05-01

    Full Text Available This paper presents the implementation of a single-phase solid-state transformer (SST for the interface between a 13.2 kV medium voltage alternative current (MVAC network and a 750 V bipolar DC distribution. The SST has ten cascaded subunits in consideration of the device rating and modulation index (MI. Each subunit consists of an AC/DC stage and a DC/DC stage with a high frequency isolated transformer (HFIT. The AC/DC stage consists of cascaded H-bridges (CHBs to cope with the MVAC. The DC/DC stage employs a triple active bridge (TAB converter for bipolar DC distribution. Topology analysis and controller design for this specific structure are discussed. In addition, the insulation of HFIT used in DC/DC converters is also discussed. A simple balancing controller at the AC/DC stage and a current sharing controller at the DC/DC stage are used to prevent DC-link voltage unbalance caused by the cascaded structure. The discussions are validated using a 150 kW single-phase 21-level SST prototype at the laboratory level.

  12. Neurovascular Network Explorer 1.0: a database of 2-photon single-vessel diameter measurements with MATLAB(®) graphical user interface.

    Science.gov (United States)

    Sridhar, Vishnu B; Tian, Peifang; Dale, Anders M; Devor, Anna; Saisan, Payam A

    2014-01-01

    We present a database client software-Neurovascular Network Explorer 1.0 (NNE 1.0)-that uses MATLAB(®) based Graphical User Interface (GUI) for interaction with a database of 2-photon single-vessel diameter measurements from our previous publication (Tian et al., 2010). These data are of particular interest for modeling the hemodynamic response. NNE 1.0 is downloaded by the user and then runs either as a MATLAB script or as a standalone program on a Windows platform. The GUI allows browsing the database according to parameters specified by the user, simple manipulation and visualization of the retrieved records (such as averaging and peak-normalization), and export of the results. Further, we provide NNE 1.0 source code. With this source code, the user can database their own experimental results, given the appropriate data structure and naming conventions, and thus share their data in a user-friendly format with other investigators. NNE 1.0 provides an example of seamless and low-cost solution for sharing of experimental data by a regular size neuroscience laboratory and may serve as a general template, facilitating dissemination of biological results and accelerating data-driven modeling approaches.

  13. Predicting workload profiles of brain-robot interface and electromygraphic neurofeedback with cortical resting-state networks: personal trait or task-specific challenge?

    Science.gov (United States)

    Fels, Meike; Bauer, Robert; Gharabaghi, Alireza

    2015-08-01

    Objective. Novel rehabilitation strategies apply robot-assisted exercises and neurofeedback tasks to facilitate intensive motor training. We aimed to disentangle task-specific and subject-related contributions to the perceived workload of these interventions and the related cortical activation patterns. Approach. We assessed the perceived workload with the NASA Task Load Index in twenty-one subjects who were exposed to two different feedback tasks in a cross-over design: (i) brain-robot interface (BRI) with haptic/proprioceptive feedback of sensorimotor oscillations related to motor imagery, and (ii) control of neuromuscular activity with feedback of the electromyography (EMG) of the same hand. We also used electroencephalography to examine the cortical activation patterns beforehand in resting state and during the training session of each task. Main results. The workload profile of BRI feedback differed from EMG feedback and was particularly characterized by the experience of frustration. The frustration level was highly correlated across tasks, suggesting subject-related relevance of this workload component. Those subjects who were specifically challenged by the respective tasks could be detected by an interhemispheric alpha-band network in resting state before the training and by their sensorimotor theta-band activation pattern during the exercise. Significance. Neurophysiological profiles in resting state and during the exercise may provide task-independent workload markers for monitoring and matching participants’ ability and task difficulty of neurofeedback interventions.

  14. Interface Circuit For Printer Port

    Science.gov (United States)

    Tucker, Jerry H.; Yadlowsky, Ann B.

    1991-01-01

    Electronic circuit, called printer-port interface circuit (PPI) developed to overcome certain disadvantages of previous methods for connecting IBM PC or PC-compatible computer to other equipment. Has both reading and writing modes of operation. Very simple, requiring only six integrated circuits. Provides for moderately fast rates of transfer of data and uses existing unmodified circuit card in IBM PC. When used with appropriate software, circuit converts printer port on IBM PC, XT, AT, or compatible personal computer to general purpose, 8-bit-data, 16-bit address bus that connects to multitude of devices.

  15. Correlates of credit card ownership in men and women.

    Science.gov (United States)

    Yang, Bijou; Lester, David

    2005-06-01

    In a sample of 352 students, correlates of credit card ownership differed by sex. For both men and women, credit card ownership was predicted by their affective attitude toward credit cards. However, whereas for men concern with money as a tactic for gaining power predicted credit card ownership, for women feelings of insecurity about having sufficient money and having a conservative approach to money predicted credit card ownership.

  16. The Regulation of the Credit Card Market in Turkey

    OpenAIRE

    Ahmet Faruk Aysan; L. Yildiz

    2006-01-01

    The rapid growth in Turkish credit card market brought together new issues. Card holders and consumer unions complain about the high interest rates, economists complain about the default rates and banks complain about the amnesties. After all of these complaints coinciding with the accelerating suicide incidences due to credit card debts, regulation has been enacted in the credit card market in Turkey. In 2003, credit cards had been taken into the scope of the Consumer Protection Law. This wa...

  17. Firewall Mechanism in a User Centric Smart Card Ownership Model

    OpenAIRE

    Akram , Raja Naeem; Markantonakis , Konstantinos; Mayes , Keith

    2010-01-01

    International audience; Multi-application smart card technology facilitates applications to securely share their data and functionality. The security enforcement and assurance in application sharing is provided by the smart card firewall. The firewall mechanism is well defined and studied in the Issuer Centric Smart Card Ownership Model (ICOM), in which a smart card is under total control of its issuer. However, it is not analysed in the User Centric Smart Card Ownership Model (UCOM) that del...

  18. Health smart cards: merging technology and medical information.

    Science.gov (United States)

    Ward, Sherry R

    2003-01-01

    Smart cards are credit card-sized plastic cards, with an embedded dime-sized Integrated Circuit microprocessor chip. Smart cards can be used for keyless entry, electronic medical records, etc. Health smart cards have been in limited use since 1982 in Europe and the United States, and several barriers including lack of infrastructure, low consumer confidence, competing standards, and cost continue to be addressed.

  19. An overview of smart card technology and markets

    OpenAIRE

    Mark Furletti

    2002-01-01

    As part of the Payment Cards Center's series of discussion papers, this paper provides an overview of smart card technology and its potential for significantly increasing payment card functionality. In addition to reviewing the current market for smart cards in the U.S., this paper examines the costs and barriers associated with their wide spread adoption. European and US smart card acceptance is compared. In addition, this paper provides background on the technological and infrastructure dev...

  20. Benefits of Using Vocabulary Flash Cards in an EFL Classroom

    OpenAIRE

    Jonathan, Aliponga; Christopher C, Johnston

    2013-01-01

    This paper was written to research and advocate the use of English word cards withregard to vocabulary acquisition and English productive and receptive competency. Also,student perceptions of using and making word cards will be examined to show theimportance of including a word card policy in an EFL classroom. Despite all the positiveresearch done on word cards, it is surprising how many Japanese EFL students do notutilize word cards in their English studies. For this research, 108 students f...

  1. Space Network Devices Developed

    Science.gov (United States)

    Jones, Robert E.

    2004-01-01

    The NASA Glenn Research Center through a contract with Spectrum Astro, Inc., has been developing space network hardware as an enabling technology using open systems interconnect (OSI) standards for space-based communications applications. The OSI standard is a well-recognized layered reference model that specifies how data should be sent node to node in a communications network. Because of this research and technology development, a space-qualifiable Ethernet-based network interface card (similar to the type found in a networked personal computer) and the associated four-port hub were designed and developed to flight specifications. During this research and development, there also have been many lessons learned for determining approaches for migrating existing spacecraft architectures to an OSI-network-based platform. Industry has recognized the benefits of targeting hardware developed around OSI standards such as Transmission Control Protocol/Internet Protocol (TCP/IP) or similar protocols for use in future generations of space communication systems. Some of these tangible benefits include overall reductions in mission schedule and cost and in system complexity. This development also brings us a step closer to the realization of a principal investigator on a terrestrial Internet site being able to interact with space platform assets in near real time. To develop this hardware, Spectrum Astro first conducted a technology analysis of alternatives study. For this analysis, they looked at the features of three protocol specifications: Ethernet (IEEE 802.3), Firewire (IEEE 1394), and Spacewire (IEEE 1355). A thorough analysis was performed on the basis of criteria such as current protocol performance and suitability for future space applications. Spectrum Astro also projected future influences such as cost, hardware and software availability, throughput performance, and integration procedures for current and transitive space architectures. After a thorough analysis

  2. FPGA Mezzanine Cards for CERN’s Accelerator Control System

    CERN Document Server

    Alvarez, P R; Lewis, J; Serrano, J; Wlostowski, T

    2009-01-01

    Field Programmable Gate Arrays (FPGAs) have become a key player in modern real time control systems. They offer determinism, simple design, high performance and versatility. A typical hardware architecture consists of an FPGA interfaced with a control bus and a variable number of digital IOs, ADCs and DACs depending on the application. Until recently the low-cost hardware paradigm has been using mezzanines containing a front end interface plus custom logic (typically an FPGA) and a local bus that interfaces the mezzanine to a carrier. As FPGAs grow in size and shrink in price, hardware reuse, testability and bus access speed could be improved if the user logic is moved to the carrier. The new FPGA Mezzanine Card (FMC) Vita 57 standard is a good example of this new paradigm. In this paper we present a standard kit of FPGA carriers and IO mezzanines for accelerator control. Carriers form factors will be VME, PCI and PCIe. The carriers will feature White Rabbit support for accurate synchronization of distributed...

  3. The C-RORC PCIe Card and its Application in the ALICE and ATLAS Experiments

    CERN Document Server

    Engel, H; Costa, F; Crone, G J; Eschweiler, D; Francis, D; Green, B; Joos, M; Kebschull, U; Kiss, T; Kugel, A; Panduro Vasquez, J G; Soos, C; Teixeira-Dias, P; Tremblet, L; Vande Vyvre, P; Vandelli, W; Vermeulen, J C; Werner, P; Wickens, F J

    2015-01-01

    The ALICE and ATLAS DAQ systems read out detector data via point-to-point serial links into custom hardware modules, the ALICE RORC and ATLAS ROBIN. To meet the increase in operational requirements both experiments are replacing their respective modules with a new common module, the C-RORC. This card, developed by ALICE, implements a PCIe Gen 2 x8 interface and interfaces to twelve optical links via three QSFP transceivers. This paper presents the design of the C-RORC, its performance and its application in the ALICE and ATLAS experiments.

  4. The Role Of New Information And Communcatıon Technologıes In The Performance Of Publıc Relatıons (Case Study: Electronıc Payment Card Network ""Shaparak"")"

    OpenAIRE

    Vosoghpour, Farkhondeh; Jafari, Ali

    2016-01-01

    The main objective of this study is the role of new information and communication technologies in the performance of public relations (case study of Shaparak network). This survey method is scrolling and measuring tool is a questionnaire. The statistical society of present research is shaparak’s staffs that are 90 peoples based on Statistics. Sampling in this study were all counting. The results showed that the use of new information technologies and communication and information ...

  5. A Hybrid Data Mining Approach for Credit Card Usage Behavior Analysis

    Science.gov (United States)

    Tsai, Chieh-Yuan

    Credit card is one of the most popular e-payment approaches in current online e-commerce. To consolidate valuable customers, card issuers invest a lot of money to maintain good relationship with their customers. Although several efforts have been done in studying card usage motivation, few researches emphasize on credit card usage behavior analysis when time periods change from t to t+1. To address this issue, an integrated data mining approach is proposed in this paper. First, the customer profile and their transaction data at time period t are retrieved from databases. Second, a LabelSOM neural network groups customers into segments and identify critical characteristics for each group. Third, a fuzzy decision tree algorithm is used to construct usage behavior rules of interesting customer groups. Finally, these rules are used to analysis the behavior changes between time periods t and t+1. An implementation case using a practical credit card database provided by a commercial bank in Taiwan is illustrated to show the benefits of the proposed framework.

  6. Problem and solution of tally segment card in MCNP code

    International Nuclear Information System (INIS)

    Xie Jiachun; Zhao Shouzhi; Sun Zheng; Jia Baoshan

    2010-01-01

    Wrong results may be given when FS card (tally segment card) was used for tally with other tally cards in Monte Carlo code MCNP. According to the comparison of segment tally results which were obtained by FS card of three different models of the same geometry, the tally results of fuel regions were found to be wrong in fill pattern. The reason is that the fuel cells were described by Universe card and FILL card, and the filled cells were always considered at Universe card definition place. A proposed solution was that the segment tally for filled cells was done at Universe card definition place. Radial flux distribution of one example was calculated in this way. The results show that the fault of segment tally with FS card in fill pattern could be solved by this method. (authors)

  7. Developing a Graphical User Interface to Automate the Estimation and Prediction of Risk Values for Flood Protective Structures using Artificial Neural Network

    Science.gov (United States)

    Hasan, M.; Helal, A.; Gabr, M.

    2014-12-01

    In this project, we focus on providing a computer-automated platform for a better assessment of the potential failures and retrofit measures of flood-protecting earth structures, e.g., dams and levees. Such structures play an important role during extreme flooding events as well as during normal operating conditions. Furthermore, they are part of other civil infrastructures such as water storage and hydropower generation. Hence, there is a clear need for accurate evaluation of stability and functionality levels during their service lifetime so that the rehabilitation and maintenance costs are effectively guided. Among condition assessment approaches based on the factor of safety, the limit states (LS) approach utilizes numerical modeling to quantify the probability of potential failures. The parameters for LS numerical modeling include i) geometry and side slopes of the embankment, ii) loading conditions in terms of rate of rising and duration of high water levels in the reservoir, and iii) cycles of rising and falling water levels simulating the effect of consecutive storms throughout the service life of the structure. Sample data regarding the correlations of these parameters are available through previous research studies. We have unified these criteria and extended the risk assessment in term of loss of life through the implementation of a graphical user interface to automate input parameters that divides data into training and testing sets, and then feeds them into Artificial Neural Network (ANN) tool through MATLAB programming. The ANN modeling allows us to predict risk values of flood protective structures based on user feedback quickly and easily. In future, we expect to fine-tune the software by adding extensive data on variations of parameters.

  8. Patient health record on a smart card.

    Science.gov (United States)

    Naszlady, A; Naszlady, J

    1998-02-01

    A validated health questionnaire has been used for the documentation of a patient's history (826 items) and of the findings from physical examination (591 items) in our clinical ward for 25 years. This computerized patient record has been completed in EUCLIDES code (CEN TC/251) for laboratory tests and an ATC and EAN code listing for the names of the drugs permanently required by the patient. In addition, emergency data were also included on an EEPROM chipcard with a 24 kb capacity. The program is written in FOX-PRO language. A group of 5000 chronically ill in-patients received these cards which contain their health data. For security reasons the contents of the smart card is only accessible by a doctor's PIN coded key card. The personalization of each card was carried out in our health center and the depersonalized alphanumeric data were collected for further statistical evaluation. This information served as a basis for a real need assessment of health care and for the calculation of its cost. Code-combined with an optical card, a completely paperless electronic patient record system has been developed containing all three information carriers in medicine: Texts, Curves and Pictures.

  9. Organic interfaces

    NARCIS (Netherlands)

    Poelman, W.A.; Tempelman, E.

    2014-01-01

    This paper deals with the consequences for product designers resulting from the replacement of traditional interfaces by responsive materials. Part 1 presents a theoretical framework regarding a new paradigm for man-machine interfacing. Part 2 provides an analysis of the opportunities offered by new

  10. Interface Realisms

    DEFF Research Database (Denmark)

    Pold, Søren

    2005-01-01

    This article argues for seeing the interface as an important representational and aesthetic form with implications for postmodern culture and digital aesthetics. The interface emphasizes realism due in part to the desire for transparency in Human-Computer Interaction (HCI) and partly...

  11. Neural fraud detection in credit card operations.

    Science.gov (United States)

    Dorronsoro, J R; Ginel, F; Sgnchez, C; Cruz, C S

    1997-01-01

    This paper presents an online system for fraud detection of credit card operations based on a neural classifier. Since it is installed in a transactional hub for operation distribution, and not on a card-issuing institution, it acts solely on the information of the operation to be rated and of its immediate previous history, and not on historic databases of past cardholder activities. Among the main characteristics of credit card traffic are the great imbalance between proper and fraudulent operations, and a great degree of mixing between both. To ensure proper model construction, a nonlinear version of Fisher's discriminant analysis, which adequately separates a good proportion of fraudulent operations away from other closer to normal traffic, has been used. The system is fully operational and currently handles more than 12 million operations per year with very satisfactory results.

  12. Data card system for filmless radiography

    International Nuclear Information System (INIS)

    Siedband, M.P.

    1987-01-01

    Data cards using the sample principles as music compact discs can store 4 MB of digital data. This is sufficient for 4 uncompressed radiographic images or 16 images with 4:1 average compression. Radiograph memory screens (stimulable phosphors) can be scanned at 1023 lines to provide the input signals. A filmless radiographic x-ray system is described which uses digital data cards of the size of common credit cards. These can be used in the same way as films are now used: placed in patient folders, copied, mailed, seen on view boxes, etc. The techniques of data acquisition, processing, compression, storage and display are described. The advantages of the system are explained in terms of economies, elimination of film (chemicals and processing), and compatibility with other data transmission methods. Suggestions are made for standardization of data storage and control so that this method may be used for other medical imaging applications, such as CT and ultrasound

  13. CRC-cards for Product Modelling

    DEFF Research Database (Denmark)

    Hvam, Lars; Riis, Jesper; Hansen, Benjamin Loer

    2003-01-01

    , transportation, service and decommissioning. A main challenge when building product models is to collect and document the product related data, information and knowledge in a structured way. CRC cards are index cards (or computerized versions of these) which are used to record proposed classes, the behavior......This paper describes the CRC (class, responsibility, collaboration) modelling process for building product models. A product model is normally represented in an IT system which contains data, information and knowledge on industrial products and their life cycle properties e.g. manufacturing...... of the classes, their responsibilities, and their relationship to other classes (collaboration). CRC modelling gives an effective, low-tech method for domain-experts, programmers and users to work closely together to identify, structure, understand and document a product model. CRC cards were originally...

  14. Authoring of digital games via card games

    DEFF Research Database (Denmark)

    Valente, Andrea; Marchetti, Emanuela

    2014-01-01

    Literature and previous studies show that creative play is easy to emerge when children interact with tangible, low-tech toys and games than with digital games. This paradoxical situation is linked to the long-standing problem of end-users (or players) authoring of digital contents and systems. We...... are to show how card games can represent digital games, how playful play can emerge in card games and digital games, and to begin defining a new way to express game behavior without the use of universal programming languages....... propose a new scenario in which trading card games help making sense and re-design computer games, to support players express themselves aesthetically and in a highly creative way. Our aim is to look for a middle ground between players becoming programmers and simply editing levels. The main contributions...

  15. A Smart Card-Based Electronic School Absenteeism System for Influenza-Like Illness Surveillance in Hong Kong: Design, Implementation, and Feasibility Assessment.

    Science.gov (United States)

    Ip, Dennis Km; Lau, Eric Hy; So, Hau Chi; Xiao, Jingyi; Lam, Chi Kin; Fang, Vicky J; Tam, Yat Hung; Leung, Gabriel M; Cowling, Benjamin J

    2017-10-06

    School-aged children have the highest incidence of respiratory virus infections each year, and transmission of respiratory viruses such as influenza virus can be a major concern in school settings. School absenteeism data have been employed as a component of influenza surveillance systems in some locations. Data timeliness and system acceptance remain as key determinants affecting the usefulness of a prospective surveillance system. The aim of this study was to assess the feasibility of implementing an electronic school absenteeism surveillance system using smart card-based technology for influenza-like illness (ILI) surveillance among a representative network of local primary and secondary schools in Hong Kong. We designed and implemented a surveillance system according to the Protocol for a Standardized information infrastructure for Pandemic and Emerging infectious disease Response (PROSPER). We employed an existing smart card-based education and school administration platform for data capture, customized the user interface, and used additional back end systems built for other downstream surveillance steps. We invited local schools to participate and collected absenteeism data by the implemented system. We compared temporal trend of the absenteeism data with data from existing community sentinel and laboratory surveillance data. We designed and implemented an ILI surveillance system utilizing smart card-based attendance tracking approach for data capture. We implemented the surveillance system in a total of 107 schools (including 66 primary schools and 41 secondary schools), covering a total of 75,052 children. The system successfully captured information on absences for 2 consecutive academic years (2012-2013 and 2013-2014). The absenteeism data we collected from the system reflected ILI activity in the community, with an upsurge in disease activity detected up to 1 to 2 weeks preceding other existing surveillance systems. We designed and implemented a novel

  16. Early clinical experience with CardioCard - a credit card-sized electronic patient record.

    Science.gov (United States)

    Bernheim, Alain M; Schaer, Beat A; Kaufmann, Christoph; Brunner-La Rocca, Hanspeter; Moulay-Lakhdar, Nadir; Buser, Peter T; Pfisterer, Matthias E; Osswald, Stefan

    2006-08-19

    CardioCard is a CDROM of credit card size containing medical information on cardiac patients. Patient data acquired during hospital stay are stored in PDF format and secured by a password known to patients only. In a consecutive series of patients, we assessed acceptance and utility of this new information medium. A questionnaire was sent to all patients who had received CardioCard over a one-year period. The questionnaire was returned by 392 patients (73%). 44% of patients had the card with them all the time. The majority of patients (73%) considered the CardioCard useful (8% not useful, 19% no statement) and most (78%) would even agree to bear additional costs. Only 5% worried about data security. In contrast, 44% would be concerned of data transmission via internet. During an observation period of 6 (SD 3) months, data were accessed by 27% of patients and 12% of their physicians. The proportion of card users was lower among older patients: 70 y, 16% and particularly among older women: 61.70 y, 9%; >70 y, 5%. Technical problems during data access occurred in 34%, mostly due to incorrect handling. A majority of patients considered CardioCard as useful and safe. Lack of hardware equipment or insufficient computer knowledge, but not safety issues were the most important limitations. As patients expressed concerns regarding protection of privacy if data were accessible via internet, this would remain a strong limiting factor for online use.

  17. UTILIZAÇÃO DE JAVA CARD COMO PLATAFORMA PARA O DESENVOLVIMENTO DE APLICAÇÕES EM SMART CARD.

    Directory of Open Access Journals (Sweden)

    Lucas Plis Dolce

    2011-12-01

    Full Text Available With the growth of Java Card technology and the increased use of smart cards in the market, demand for the development of applications that run on the cards has risen. These applications need to offerbesides portability, convenience and safety, service quality and high availability for users. This article examines the main concepts of Smart Card technology and use these to develop small applicationsusing the Java Card focusing on the use for control systems where the card would serve as a repository of some data and query tool for larger systems.

  18. FBCT fast intensity measurement using TRIC cards

    CERN Document Server

    Allica, J C; Belohrad, D; Jensen, L; Lenardon, F; SØby, L

    2015-01-01

    At the CERN PS complex, precise fast intensity measurements are very important in order to optimize the transfer efficiencies between the different accelerators. Over the last two years a complete renovation has been ongoing, where the old electronics, based on analogue integrators, have been replaced by a fully digital system enclosed in a single VME based card. This new system called TRIC (Transformer Integration Card) is based on a 12 bit, 212 MS/s ADC and an FPGA for the signal processing. Also located on the same board one finds a 250 V/1.5 W DCDC converter used to generate precise calibration pulses.

  19. Card controlled beta backscatter thickness measuring instrument

    International Nuclear Information System (INIS)

    Schlesinger, J.

    1978-01-01

    An improved beta backscatter instrument for the nondestructive measurement of the thickness of thin coatings on a substrate is described. Included therein is the utilization of a bank of memory stored data representative of isotope, substrate, coating material and thickness range characteristics in association with a control card having predetermined indicia thereon selectively representative of a particular isotope, substrate material, coating material and thickness range for conditioning electronic circuit means by memory stored data selected in accord with the predetermined indicia on a control card for converting backscattered beta particle counts into indicia of coating thickness

  20. Microprocessor interfacing

    CERN Document Server

    Vears, R E

    2014-01-01

    Microprocessor Interfacing provides the coverage of the Business and Technician Education Council level NIII unit in Microprocessor Interfacing (syllabus U86/335). Composed of seven chapters, the book explains the foundation in microprocessor interfacing techniques in hardware and software that can be used for problem identification and solving. The book focuses on the 6502, Z80, and 6800/02 microprocessor families. The technique starts with signal conditioning, filtering, and cleaning before the signal can be processed. The signal conversion, from analog to digital or vice versa, is expl

  1. Research interface for experimental ultrasound imaging - the CFU grabber project

    DEFF Research Database (Denmark)

    Pedersen, Mads Møller; Hemmsen, Martin Christian; Jensen, Jørgen Arendt

    system RASMUS. Furthermore precise scanner settings are stored for inter- and intra-observer studies. The resulting images are used for clinical evaluation. Method and materials The ultrasound scanners research interface is connected to a graphical grabber card in a Windows PC (Grabber PC). The grabber...

  2. RENEWAL OF CRIMINAL LAW AGAINST ABUSE OF CREDIT CARDS

    Directory of Open Access Journals (Sweden)

    Eka Nugraha

    2015-07-01

    Full Text Available The use of credit cards for payment in lieu of cash since the introduction of the first credit card ever more widely known and used by people.   On the early introduction of this credit card, the wearer is limited to certain circles. However, a few decades later the credit card industry primarily enter the end of the Decade of the 1970s, has penetrated almost throughout all parts of the world, including Indonesia.   A credit card is issued by most commonly used by the public and apply the current International consists of a range of brands, among others, a very popular one is Visa and Master Card are each issued by the credit card company international and Master Card International.In practice many found the works in banking that may be subject to sanctions as set forth in the book of the law of criminal law (Criminal Code.

  3. Barber's Point, Oahu, Hawaii Drift Card Study 2002-2004

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Drift cards were be released from Barber's Point, Oahu, approximately once a month during the two year span to get an idea of the distribution of card drift under...

  4. Increasing Opportunities for Student Responding: Response Cards in the Classroom

    Science.gov (United States)

    Helf, Shawnna

    2015-01-01

    Response cards are designed to encourage active student engagement during instruction. In this article, the use of response cards is described, along with ways teachers can use the information to inform their work and considerations for implementation.

  5. Credit and Debit Card Usage and Cash Flow Management Control ...

    African Journals Online (AJOL)

    First Lady

    2012-10-27

    Oct 27, 2012 ... Simiyu, Justo Simiyu - Department of Business Management, Chuka. University College ... Key words: Debit cards, credit cards, commercial banks, Kenya. Introduction ..... saving at once convenience without proper planning.

  6. Puppet Visual Adaptation on Playing Cards as Educational Media

    Directory of Open Access Journals (Sweden)

    Joko Wiyoso

    2017-02-01

    Full Text Available This study aims at presenting an effective media in a form of puppet picture playing cards as a means to introduce traditional puppet to the society. Research and Development (R&D was chosen as the method to develop the playing cards. Results were presented in a form of the design of puppet picture playing cards as many as 54 cards as well as 54 puppet characters as the background pictures. The design of the playing cards is adjusted to the common playing cards which are distributed widely in the society, including both the sizes and symbols, like the pictures of spade, heart, diamond, and club. In detail, the design comprises: (1 the size of playing cards which is 6 cm width of the upper and lower sides and 9 cm length for the left and right sides. (2 The playing cards’ background is in a bright color so does the puppet picture on the card can be seen clearly.

  7. Networking

    OpenAIRE

    Rauno Lindholm, Daniel; Boisen Devantier, Lykke; Nyborg, Karoline Lykke; Høgsbro, Andreas; Fries, de; Skovlund, Louise

    2016-01-01

    The purpose of this project was to examine what influencing factor that has had an impact on the presumed increasement of the use of networking among academics on the labour market and how it is expressed. On the basis of the influence from globalization on the labour market it can be concluded that the globalization has transformed the labour market into a market based on the organization of networks. In this new organization there is a greater emphasis on employees having social qualificati...

  8. Interface Anywhere

    Data.gov (United States)

    National Aeronautics and Space Administration — Current paradigms for crew interfaces to the systems that require control are constrained by decades old technologies which require the crew to be physically near an...

  9. Sample Development on Java Smart-Card Electronic Wallet Application

    OpenAIRE

    Toma Cristian

    2009-01-01

    In this paper, are highlighted concepts as: complete Java card application, life cycle of an applet, and a practical electronic wallet sample implemented in Java card technology. As a practical approach it would be interesting building applets for ID, Driving License, Health-Insurance smart cards, for encrypt and digitally sign documents, for E-Commerce and for accessing critical resources in government and military field. The end of this article it is presented a java card electronic wallet ...

  10. Studi Perkembangan Pasar Smart Card Indonesia Pada Sektor Perbankan

    OpenAIRE

    Onny Rafizan

    2017-01-01

    Smart card merupakan salah satu teknologi yang sudah banyak digunakan di Indonesia di berbagai sektor. Dari sisi teknologi, industri dalam negeri sebenarnya sudah mampu memproduksi smart card, sehingga industri ini sangat potensial untuk dikembangkan menuju kemandirian. Penelitian ini dilakukan sebagai bagian dalam USAha pemerintah untuk mendorong perkembangan industri smart card dalam negeri, dengan tujuan memberikan gambaran kondisi pasar smart card di Indonesia saat ini. Pengumpulan data p...

  11. Smart Card sebagai Pengaman Sepeda Motor Berbasis Mikrokontroler

    OpenAIRE

    Yohanes Chrisostomus Purba; Antonius Wibowo

    2010-01-01

    Pengaman sepeda motor yang berbentuk smart card terdiri dari bagian yang memuat chip EEPROM dan bagian pengaman smart card. Pembacaan smart card didesain dan ditempatkan pada sepeda motor. Untuk pembacaan data chip SLE 4442, dan pembacaan data pengaman smart card digunakan mikrokontroler AT89S51. Untuk pengaturan aktif maupun tidak aktifnya CDI, dan starter juga digunakan mikrokontroler AT89S51. Sistem pengaman sepeda motor akan menjadi aktif bila sepeda motor dalam keadaan mati. Smart car...

  12. The Pivotal Role of the Parieto-Occipital Lobe in Card Game-Induced Reflex Epilepsy: A Voxel-Based Morphometry Study.

    Science.gov (United States)

    Park, Kang Min; Kim, Sung Eun; Lee, Byung In

    2016-01-01

    The pathogenesis of card game-induced reflex epilepsy has not been determined so far. The aim of this study was to evaluate structural abnormalities using voxel-based morphometry (VBM) analysis, which may give some clue about the pathogenesis in card game-induced reflex epilepsy. The 3 subjects were diagnosed with card game-induced reflex epilepsy. Evaluation involved a structured interview to obtain clinical information and brain MRI. In VBM analysis, Statistical Parametric Mapping 8 running on the MATLAB platform was employed to analyze the structural differences between patients with card game-induced reflex epilepsy and age- and sex-matched control subjects. The results of VBM analysis revealed that patients with card game-induced reflex epilepsy had significantly increased gray matter volume in the right occipital and parietal lobe. However, there were no structures with decreased gray matter volume in patients with card game-induced reflex epilepsy compared with control subjects. In addition, we found that the patients with card game-induced reflex epilepsy had onset of seizures in adulthood rather than in adolescence, and all of the patients were men. The parieto-occipital lobes might be partially involved in the neuronal network responsible for card game-induced reflex epilepsy. © 2016 S. Karger AG, Basel.

  13. Abstract behaviour modelling and prognosis on the basis of spatially distributed sensor networks with Kohonen cards and Markov chains; Abstrakte Verhaltensmodellierung und -prognose auf der Basis raeumlich verteilter Sensornetze mit Kohonen-Karten und Markov-Ketten

    Energy Technology Data Exchange (ETDEWEB)

    Matthes, J.; Keller, H.B.; Mikut, R. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Angewandte Informatik

    2000-10-01

    Evironmental processes, e.g. local air quality changes in urban agglomerations, buildings and production halls are dynamic processes with regionally distributed physical variables. They can be monitored by networks of distributed measuring probes. Processes of this type form the basis of complex systems with many degrees of freedom and stochastic effects that are difficult to measure. The contribution presents an introduction to Markov chains, proposes a method of generating Markov chains as a prognostic model, and demonstrates the method using the example of an air quality monitoring process. [German] Fuer die Ueberwachung dynamischer Prozesse, deren physikalische Groessen raeumlich verteilt auftreten, werden oft Netze raeumlich verteilter Sensoren eingesetzt. Umweltprozesse, wie z.B. die oertliche Luftqualitaetsaenderung in Ballungsraeumen, Gebaeuden und Produktionsanlagen, aber auch verschiedene verfahrenstechnische Prozesse sind Vertreter dieser Prozessklasse. Solchen Prozessen hinterliegen komplexe Systeme, die durch eine hohe Anzahl an Freiheitsgraden und durch stochastische schwer messbare Einfluesse gekennzeichnet sind. Ziel dieses Vortrages ist es, - eine kurze Einfuehrung zu Markov-Ketten zu gegeben (Abschnitt 2); - ein datengestuetztes Verfahren vorzuschlagen, das nach einer Schaetzung abstrakter Prozesszustaende mit Hilfe von Kohonen-Karten Markov-Ketten als Prognosemodell generiert (Abschnitt 3), und - dieses Verfahren anhand eines Simulationsbeispiels zur Luftqualitaetsueberwachung zu demonstrieren (Abschnitt 4). (orig.)

  14. A User Interface Toolkit for a Small Screen Device.

    OpenAIRE

    UOTILA, ALEKSI

    2000-01-01

    The appearance of different kinds of networked mobile devices and network appliances creates special requirements for user interfaces that are not met by existing widget based user interface creation toolkits. This thesis studies the problem domain of user interface creation toolkits for portable network connected devices. The portable nature of these devices places great restrictions on the user interface capabilities. One main characteristic of the devices is that they have small screens co...

  15. Looking at Debit and Credit Card Fraud

    Science.gov (United States)

    Porkess, Roger; Mason, Stephen

    2012-01-01

    This article, written jointly by a mathematician and a barrister, looks at some of the statistical issues raised by court cases based on fraud involving chip and PIN cards. It provides examples and insights that statistics teachers should find helpful. (Contains 4 tables and 1 figure.)

  16. Artist Trading Cards: Connecting with Other Communities

    Science.gov (United States)

    Bovio, Deborah

    2011-01-01

    Creating and exchanging Artist Trading Cards (ATCs) has been a rapidly growing trend. These miniature works of art are fun to make--and even more fun to share. The intrigue of developing these handmade treasures begins with the intent of creating art simply for the love of art. In this article, the author describes how her students made their…

  17. Melting Metal on a Playing Card

    Science.gov (United States)

    Greenslade, Thomas B., Jr.

    2016-01-01

    Many of us are familiar with the demonstration of boiling water in a paper cup held over a candle or a Bunsen burner; the ignition temperature of paper is above the temperature of 100°C at which water boils under standard conditions. A more dramatic demonstration is melting tin held in a playing card. This illustration is from Tissandier's book on…

  18. Integration through a Card-Sort Activity

    Science.gov (United States)

    Green, Kris; Ricca, Bernard P.

    2015-01-01

    Learning to compute integrals via the various techniques of integration (e.g., integration by parts, partial fractions, etc.) is difficult for many students. Here, we look at how students in a college level Calculus II course develop the ability to categorize integrals and the difficulties they encounter using a card sort-resort activity. Analysis…

  19. Tumores cardíacos primarios

    Directory of Open Access Journals (Sweden)

    Rosa Eugenia Díaz Garriga

    2013-10-01

    Full Text Available Introducción: los tumores cardíacos primarios son aquellos que se originan en Miocardio o Pericardio. El 90% son benignos, no son invasivos, pero debido a su localización pueden provocar alteraciones hemodinámicas graves y arrítmias. Presentación del caso: dos casos portadores de tumores cardíacos diagnosticados en la etapa prenatal, una gestante de 32 años, portadora de una Neurofribromatosis que en la ecocardiografía fetal de su hijo, se identifican dos tipos de tumores cardíacos, un mixoma auricular y un fibroma, y un niño que desde la etapa prenatal se diagnosticó un rabdomioma, lo cual se confirmó al nacimiento y que regresó espontáneamente. Conclusiones: a ecocardiografía fetal permite cada vez con más frecuencia, el diagnóstico intraútero de tumores cardíacos. Los rabdomiomas regresan en más del 50% de los casos, pero pueden ser un marcador de Esclerosis Tuberosa. Los tumores cardiacos se asocian a otras afecciones congénitas y requieren de tratamiento quirúrgico. Aspectos todos a tener en consideración para realizar el asesoramiento genético a la familia.

  20. Optical security features for plastic card documents

    Science.gov (United States)

    Hossick Schott, Joachim

    1998-04-01

    Print-on-demand is currently a major trend in the production of paper based documents. This fully digital production philosophy will likely have ramifications also for the secure identification document market. Here, plastic cards increasingly replace traditionally paper based security sensitive documents such as drivers licenses and passports. The information content of plastic cards can be made highly secure by using chip cards. However, printed and other optical security features will continue to play an important role, both for machine readable and visual inspection. Therefore, on-demand high resolution print technologies, laser engraving, luminescent pigments and laminated features such as holograms, kinegrams or phase gratings will have to be considered for the production of secure identification documents. Very important are also basic optical, surface and material durability properties of the laminates as well as the strength and nature of the adhesion between the layers. This presentation will address some of the specific problems encountered when optical security features such as high resolution printing and laser engraving are to be integrated in the on-demand production of secure plastic card identification documents.

  1. Insuficiencia cardíaca y diabetes

    Directory of Open Access Journals (Sweden)

    Jorge Thierer

    2006-01-01

    Full Text Available La prevalencia de la insuficiencia cardíaca y la diabetes continúa creciendo. Ambas están fuertemente asociadas. La diabetes es un fuerte predictor de aparición de insuficiencia cardíaca. Las razones son la presencia de enfermedad coronaria y los trastornos metabólicos vinculados con la resistencia a la insulina que generan disfunción contráctil. Los pacientes con insuficiencia cardíaca que son diabéticos tienen peor evolución. Los Betabloqueantes, vasodilatadores y los inhibidores de la enzima convertidora ejercen una influencia favorable, en tanto que el uso de glitazonas todavía es controversial. La insuficiencia cardíaca puede a su vez generar diabetes, debido a la activación del sistema nervioso simpático y al efecto del tratamiento. La comprensión adecuada de estos hechos es fundamental para tomar decisiones correctas y mejorar la suerte de los pacientes.

  2. One ID Card for the Entire Campus.

    Science.gov (United States)

    Ridenour, David P.; Ferguson, Linda M.

    1986-01-01

    The implementation by Indiana State University of a machine-readable photo ID system for their food services prompted an investigation into the available alternatives and requirements for a more efficient all-University ID card system. The new ID system is described. (AUTHOR/MLW)

  3. FT 3 Flight Test Cards for Export

    Science.gov (United States)

    Marston, Michael L.

    2015-01-01

    These flight test cards will be made available to stakeholders who participated in FT3. NASA entered into the relationship with our stakeholders, including the FAA, to develop requirements that will lead to routine flights of unmanned aircraft systems flying in the national airspace system.

  4. "It's in the Cards": The Contribution of Illustrated Metaphor Cards to Exploring Values Within Narratives.

    Science.gov (United States)

    Karnieli-Miller, Orit; Nissim, Geffen; Goldberg, Miriam

    2017-01-01

    In this article, we present the use of illustrated metaphorical cards as a technique to enrich the qualitative narrative interview. We examine the advantages of incorporating a projective tool to assist in constructing and understanding personal narratives of people living with severe mental illness. We interviewed 25 participants-staff and members of a clubhouse in Israel (an international community model of rehabilitation in mental health)-and sought to understand their stories focused on personal and organizational values. The findings revealed that, in most cases, the cards contributed to data collection by enhancing the interviewees' ability for expression and by facilitating richer, more comprehensive stories and descriptions. This in turn enhanced the researcher's ability to understand the messages and stories presented. The research conclusions discuss the cards' potential contribution to improving data collection and analysis. The cards became an additional channel for expressing participants' experiences, emotions, and unique voice. © The Author(s) 2015.

  5. 8 CFR 1212.6 - Border crossing identification cards.

    Science.gov (United States)

    2010-01-01

    ... combined B-1/B-2 visitor visa and non-biometric border crossing identification card or (a similar stamp in... non-biometric border crossing identification card (or similar stamp in a passport), issued by the DOS... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Border crossing identification cards. 1212...

  6. 25 CFR 11.422 - Unauthorized use of credit cards.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Unauthorized use of credit cards. 11.422 Section 11.422... LAW AND ORDER CODE Criminal Offenses § 11.422 Unauthorized use of credit cards. (a) A person commits a misdemeanor if he or she uses a credit card for the purpose of obtaining property or services with knowledge...

  7. 77 FR 37558 - Disclosure of Certain Credit Card Complaint Data

    Science.gov (United States)

    2012-06-22

    ... Certain Credit Card Complaint Data AGENCY: Bureau of Consumer Financial Protection. ACTION: Notice of... Bureau plans to exercise its discretion to publicly disclose certain credit card complaint data that do not include personally identifiable information. The Bureau receives credit card complaints from...

  8. 77 FR 75410 - Request for Information Regarding Credit Card Market

    Science.gov (United States)

    2012-12-20

    ... Regarding Credit Card Market AGENCY: Bureau of Consumer Financial Protection. ACTION: Notice and request for information. SUMMARY: Section 502(a) of the Credit Card Accountability Responsibility and Disclosure Act of... review (Review) of the consumer credit card market, within the limits of its existing resources available...

  9. Credit Card Attitudes and Behaviors of College Students

    Science.gov (United States)

    Joo, S.-H.; Grable, J. E.; Bagwell, D. C.

    2005-01-01

    At a southwestern public university, 242 students responded to a questionnaire about their credit-card use and attitudes. The results revealed that about 70 percent of the students held one or more credit cards, and about 10 percent had five or more credit cards. Twenty-two percent never kept copies of their charge slips, and only 49 percent paid…

  10. Clinicians completion rate of radiology request card in a Nigerian ...

    African Journals Online (AJOL)

    The importance of adequately completing the radiology request card by the clinicians, in management of patient cannot be overemphasized. Omission of information on the request card may lead to reporting error. This study investigated the compliance rate of filling the radiology request card by clinicians received in a ...

  11. 46 CFR 154.1814 - Cargo information cards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo information cards. 154.1814 Section 154.1814... cards. (a) No person may operate a vessel unless a cargo information card for each cargo being... accessible to the person in charge of the watch. (b) When a vessel is moored at a terminal, the master shall...

  12. 22 CFR 50.9 - Card of identity.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Card of identity. 50.9 Section 50.9 Foreign... of United States Nationality of a Person Abroad § 50.9 Card of identity. When authorized by the Department, consular offices or designated nationality examiners may issue a card of identity for travel to...

  13. 76 FR 43393 - Debit Card Interchange Fees and Routing

    Science.gov (United States)

    2011-07-20

    ... programs and certain reloadable, general-use prepaid cards not marketed or labeled as a gift card or gift... evolved to support payments made by consumers for the purchase of goods or services at merchants... of the purchase transaction. Debit cards are generally issued by depository institutions to their...

  14. 76 FR 3180 - Market Test of Gift Cards

    Science.gov (United States)

    2011-01-19

    ... are very similar to money orders. Id. at 7. The Postal Service asserts that gift cards purchased from... POSTAL REGULATORY COMMISSION [Docket No. MT2011-2; Order No. 647] Market Test of Gift Cards AGENCY... Service proposal to conduct a 2-year market test involving the sale of gift cards. This document describes...

  15. On Cyclic Plans for Scheduling a Smart Card Personalisation System

    NARCIS (Netherlands)

    Nieberg, T.

    An industrial case study for scheduling the personalisation of smart cards is presented and analysed. Smart cards are personalised in several machines that are served by an underlying conveyor belt connecting these. As there are usually a very high number of smart cards to be personalised, the focus

  16. 78 FR 39020 - Market Test on Gift Cards

    Science.gov (United States)

    2013-06-28

    ... POSTAL REGULATORY COMMISSION [Docket No. MT2011-2; Order No. 1755] Market Test on Gift Cards... Service filing requesting a temporary extension of a market test on gift cards. This notice informs the... INFORMATION: On June 18, 2013, the United States Postal Service moved to temporarily extend its Gift Card...

  17. UNIVERSAL INTERFACE TO MULTIPLE OPERATIONS SYSTEMS

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.

    1986-01-01

    Alternative ways to provide access to operations systems that maintain, test, and configure complex telephone networks are being explored. It is suggested that a universal interface that provides simultaneous access to multiple operations systems that execute in different hardware and software...... environments, can be provided by an architecture that is based on the separation of presentation issues from application issues and on a modular interface management system that consists of a virtual user interface, physical user interface, and interface agent. The interface functionality that is needed...

  18. Clearing and settlement of interbank card transactions: a MasterCard tutorial for Federal Reserve payments analysts

    OpenAIRE

    Susan Herbst-Murphy

    2013-01-01

    The Payment Cards Center organized a meeting at which senior officials from MasterCard shared information with Federal Reserve System payments analysts about the clearing and settlement functions that MasterCard performs for its client banks. These functions involve the transfer of information pertaining to card-based transactions (clearing) and the exchange of monetary value (settlement) that takes place between the banks whose customers are cardholders and those banks whose customers are ca...

  19. Thermorewritable card by using dyes; Senryo wo mochiita kakikae kanona card

    Energy Technology Data Exchange (ETDEWEB)

    Muto, Y.

    1998-06-01

    Described herein are thermorewritable cards which use dyes. Rewritable cards, mainly used for membership and point cards, are themselves used repeatedly and required to be rewritable repeatedly for information they carry. The dyes and developers used for the conventional heat- and pressure-sensitive papers are colorless, leuco-dye precursors and acidic compounds with a phenolic hydroxyl group or the like. They transfer electrons to each other, opening the lactone ring of the dye precursor to develop the color. Developing and erasing the color are reversible chemical reactions, where the color is developed under heat and maintained by quenching. For erasing the color, it is heated and then slowly cooled to separate the precursor and developer phases from each other. A printer (thermal head) is required for developing and erasing a color. Durability under various conditions is another requirement of the card; it must be adaptable to weather conditions and resistant to sweat. The new thermorewritable card is protected from various adverse effects on its chemical reactions, and made as durable as the conventional cards. 3 refs., 5 figs., 1 tab.

  20. Evaluation of using ferrofluid as an interface material for a field-reversible thermal connector

    Science.gov (United States)

    Yousif, Ahmed S.

    The electrical functionality of an avionics chassis is limited due to heat dissipation limits. The limits arise due to the fact that components in an avionic computer boxes are packed very compactly, with the components mounted onto plug-in cards, and the harsh environment experienced by the chassis limits how heat can be dissipated from the cards. Convective and radiative heat transfer to the ambient are generally not possible. Therefore it is necessary to have heat transferred from the components conducted to the edge of the plug-in cards. The heat then needs to conduct from the card edge to a cold block that not only holds the card in place, but also removes the generated heat by some heat transfer fluid that is circulated through the cold block. The interface between the plug-in card and the cold block typically has a high thermal resistance since it is necessary for the card to have the capability to be re-workable, meaning that the card can be removed and then returned to the chassis. Reducing the thermal resistance of the interface is the objective of the current study and the topic of this thesis. The current design uses a pressure interface between the card and cold block. The contact pressure is increased through the addition of a wedgelock, which is a field-reversible mechanical connector. To use a wedgelock, the cold block has channels milled on the surface with widths that are larger than the thickness of the plug-in card and the un-expanded wedgelock. The card edge is placed in the channel and placed against one of the channel walls. A wedgelock is then placed between the card and the other channel wall. The wedgelock is then expanded by using either a screw or a lever. As the wedgelock expands it fills in the remaining channel gap and bears against the other face of the plug-in card. The majority of heat generated by the components on the plug-in card is forced to conduct from the card into the wall of the cold block, effectively a single sided, dry

  1. The European Commission's Decision in MasterCard : Issues Facing the Payment Card Industry for the Future

    OpenAIRE

    John Wotton

    2008-01-01

    The Decision in MasterCard displays a fundamental divergence between the Commission’s and MasterCard’s approaches to the analysis of the competitive effects of open payment card schemes.

  2. ALICE common read-out receiver card status and HLT implementation

    Energy Technology Data Exchange (ETDEWEB)

    Engel, Heiko; Kebschull, Udo [IRI, Goethe-Universitaet Frankfurt am Main (Germany); Collaboration: ALICE-Collaboration

    2015-07-01

    The ALICE Common Read-Out Receiver Card (C-RORC) is an FPGA based PCIe read out board with optical interfaces primarily developed to replace the previous ALICE High-Level Trigger (HLT) and Data Acquisition (DAQ) Read-Out Receiver Cards from Run1 with a state of the art hardware platform to cope with the increased link rates and event data volume of Run2. The large scale production of the C-RORCs for Run2 has been completed in cooperation with ATLAS and the boards are installed in the productive clusters of ALICE HLT, ALICE DAQ and ATLAS TDAQ ROS. This contribution describes the hardware and firmware of the C-RORC in the ALICE HLT application and its online processing capabilities. Additionally, a high level dataflow description approach to implement hardware processing steps more efficiently is presented.

  3. The mother's card: a simplified aid for primary health workers.

    Science.gov (United States)

    Shah, K P; Shah, P M

    1981-02-01

    The Mother's Card and its use are described. The card is filled out by the health worker and provides data on the mother concerning family planning, menstrual cycles, pregnancy period (including whether at risk, state of nutrition, immunization against tetanus, and expected date of birth), and breastfeeding. The card is kept by the mother, and the health worker keeps a copy. Each card has space for 10 years and up to 4 pregnancies. The cards have been used successfully in India since 1976 and in Somalia since early 1980, and were useful in strengthening family planning programs as well as identifying pregnancies at risk for special attention.

  4. Consumer Credit Card Use Intention and Influence Factors Analysis

    Directory of Open Access Journals (Sweden)

    Wang Yantao

    2017-01-01

    Full Text Available Credit card as a kind of advanced means of payment and the new way of consumer credit in the world widely, but in our country is faced with some problems, such as their per capita spending is low, open the card number is small, motionless bank card is a lot. In this paper, using the Logit model to analyze the Anshan city in Liaoning province consumer credit card usage. And combined with empirical analysis to provide banking management Suggestions and marketing countermeasures, including targeted to provide different kinds of credit card.

  5. The possibility of using "Job Card" for career education

    OpenAIRE

    横山, 裕; ヨコヤマ, ユタカ; Yutaka, YOKOYAMA

    2009-01-01

    This paper described the advantage of using a "job card" for career education. "The job card system" is a new system that began this year. The original purpose of "the job card system" is to support a person looking for a job. When a job seeker writes a "job card", the job seeker can understand his own work experience and employment possibilities while getting the advice of the career counselor. If a teacher utilized a "job card" for career education in this way, the student can understand hi...

  6. Health care report cards: what about consumers' perspectives?

    Science.gov (United States)

    McGee, J; Knutson, D

    1994-10-01

    Though the report card style is seen by many as a way to create better-informed consumers, very little is actually known about how consumers will respond to health care report cards. Report cards are only one of many factors that influence health care decision making. Much consumer-oriented effort and fine-tuning will be required to make report cards effective. Using the approach called "social marketing" as a framework, specific examples are used to outline some ideas for more intensive pursuit of consumers' perspectives in the design and distribution of report cards.

  7. Designing Interfaces

    CERN Document Server

    Tidwell, Jenifer

    2010-01-01

    Despite all of the UI toolkits available today, it's still not easy to design good application interfaces. This bestselling book is one of the few reliable sources to help you navigate through the maze of design options. By capturing UI best practices and reusable ideas as design patterns, Designing Interfaces provides solutions to common design problems that you can tailor to the situation at hand. This updated edition includes patterns for mobile apps and social media, as well as web applications and desktop software. Each pattern contains full-color examples and practical design advice th

  8. Card products market in the Republic of Croatia

    Directory of Open Access Journals (Sweden)

    Ivana Šučur

    2007-12-01

    Full Text Available Card business in the Republic of Croatia started to develop more than 30 years ago in the form of non-bank card products, issued by American Express and Diners Club global payment systems. These card products were defined as standard charge cards and had been the only card products present in the market until bank cards appeared about ten years ago. The situation changed completely when banks started to enter the market as active participants in the card business. In co-operation with bank global payment systems, MasterCard Worldwide and Visa International, banks have issued several millions of various cards in just a few years, while non-bank issuers have followed the same trend with new card products. This paper explores the current situation in the domestic market; it determines who the cardholders of particular products are, which products they are familiar with, whether they use them or not and for what reason. Cardholders’ opinions, attitudes and preferences towards existing products have been explored, as well as the benefits they would like to get. The results obtained imply that cardholders are familiar with all bank and non-bank card brands, but that they use mostly those which provide them with specific benefits. Therefore, instead of focusing on providing more similar products, issuers should concentrate on designing differentiated products that have been tailored to cardholders’ real needs.

  9. Developing a Social, Cultural and Economic Report Card for a Regional Industrial Harbour.

    Directory of Open Access Journals (Sweden)

    Sean Pascoe

    Full Text Available Report cards are increasingly used to provide ongoing snap-shots of progress towards specific ecosystem health goals, particularly in coastal regions where planners need to balance competing demands for coastal resources from a range of industries. While most previous report cards focus on the biophysical components of the system, there is a growing interest in including the social and economic implications of ecosystem management to provide a greater social-ecological system understanding. Such a report card was requested on the Gladstone Harbour area in central Queensland, Australia. Gladstone Harbour adjoins the southern Great Barrier Reef, and is also a major industrial and shipping port. Balancing social, economic and environmental interests is therefore of great concern to the regional managers. While environmental benchmarking procedures are well established within Australia (and elsewhere, a method for assessing social and economic performance of coastal management is generally lacking. The key aim of this study was to develop and pilot a system for the development of a report card relating to appropriate cultural, social and economic objectives. The approach developed uses a range of multicriteria decision analysis methods to assess and combine different qualitative and quantitative measures, including the use of Bayesian Belief Networks to combine the different measures and provide an overall quantitative score for each of the key management objectives. The approach developed is readily transferable for purposes of similar assessments in other regions.

  10. Developing an early alert system for metastatic spinal cord compression (MSCC): Red Flag credit cards.

    Science.gov (United States)

    Turnpenney, Jackie; Greenhalgh, Sue; Richards, Lena; Crabtree, Annamaria; Selfe, James

    2015-01-01

    To produce a user-friendly list of metastatic spinal cord compression (MSCC) Red Flags for non-specialist 'generalist' front-line clinicians working in primary-care settings. The issue of identifying MSCC early to prevent serious long-term disability was a key theme identified by the Task and Finish Group at Greater Manchester and Cheshire Cancer Network (GMCCN) in 2009. It was this group who initially brokered and then coordinated the current development as part of their strategic approach to improving care for MSCC patients. A consensus-building approach that considered the essential minimum data requirements to raise the index of suspicion suggestive of MSCC was adopted. This followed a model of cross-boundary working to facilitate the mutual sharing of expertise across a variety of relevant clinical specialisms. A guideline aimed at helping clinicians to identify the early signs and symptoms of MSCC was produced in the form of a credit card. This credit card includes key statements about MSCC, signposting to key sources of additional information and a user-friendly list of Red Flags which has been developed into an eight-item Red Flag mnemonic. To date, an excess of 120,000 cards have been printed by a variety of organisations and the distribution of the cards is ongoing across the United Kingdom and the Republic of Ireland.

  11. Interface unit

    NARCIS (Netherlands)

    Keyson, D.V.; Freudenthal, A.; De Hoogh, M.P.A.; Dekoven, E.A.M.

    2001-01-01

    The invention relates to an interface unit comprising at least a display unit for communication with a user, which is designed for being coupled with a control unit for at least one or more parameters in a living or working environment, such as the temperature setting in a house, which control unit

  12. Interface superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Gariglio, S., E-mail: stefano.gariglio@unige.ch [DQMP, Université de Genève, 24 Quai E.-Ansermet, CH-1211 Genève (Switzerland); Gabay, M. [Laboratoire de Physique des Solides, Bat 510, Université Paris-Sud 11, Centre d’Orsay, 91405 Orsay Cedex (France); Mannhart, J. [Max Planck Institute for Solid State Research, 70569 Stuttgart (Germany); Triscone, J.-M. [DQMP, Université de Genève, 24 Quai E.-Ansermet, CH-1211 Genève (Switzerland)

    2015-07-15

    Highlights: • We discuss interfacial superconductivity, a field boosted by the discovery of the superconducting interface between LaAlO. • This system allows the electric field control and the on/off switching of the superconducting state. • We compare superconductivity at the interface and in bulk doped SrTiO. • We discuss the role of the interfacially induced Rashba type spin–orbit. • We briefly discuss superconductivity in cuprates, in electrical double layer transistor field effect experiments. • Recent observations of a high T{sub c} in a monolayer of FeSe deposited on SrTiO{sub 3} are presented. - Abstract: Low dimensional superconducting systems have been the subject of numerous studies for many years. In this article, we focus our attention on interfacial superconductivity, a field that has been boosted by the discovery of superconductivity at the interface between the two band insulators LaAlO{sub 3} and SrTiO{sub 3}. We explore the properties of this amazing system that allows the electric field control and on/off switching of superconductivity. We discuss the similarities and differences between bulk doped SrTiO{sub 3} and the interface system and the possible role of the interfacially induced Rashba type spin–orbit. We also, more briefly, discuss interface superconductivity in cuprates, in electrical double layer transistor field effect experiments, and the recent observation of a high T{sub c} in a monolayer of FeSe deposited on SrTiO{sub 3}.

  13. Falla cardíaca aguda

    OpenAIRE

    Sénior Sánchez, Juan Manuel; Gándara Ricardo, Jairo Alfonso

    2015-01-01

    Se presenta el caso clínico de una mujer de 26 años de edad, que acudió al Hospital Universitario San Vicente Fundación (Medellín) con síntomas y signos de falla cardíaca aguda y diagnóstico previo de falla cardíaca crónica con fracción de expulsión disminuida, de origen no claro, tromboembolismo pulmonar y ataque cerebrovascular isquémico, sin modulación neurohormonal óptima. Ingresó a la institución con hallazgos clínicos de sobrecarga hídrica y baja perfusión tisular, con requerimiento de ...

  14. Enhancing Privacy for Biometric Identification Cards

    Directory of Open Access Journals (Sweden)

    2009-01-01

    Full Text Available Most developed countries have started the implementation of biometric electronic identification cards, especially passports. The European Union and the United States of America struggle to introduce and standardize these electronic documents. Due to the personal nature of the biometric elements used for the generation of these cards, privacy issues were raised on both sides of the Atlantic Ocean, leading to civilian protests and concerns. The lack of transparency from the public authorities responsible with the implementation of such identification systems, and the poor technological approaches chosen by these authorities, are the main reasons for the negative popularity of the new identification methods. The following article shows an approach that provides all the benefits of modern technological advances in the fields of biometrics and cryptography, without sacrificing the privacy of those that will be the beneficiaries of the new system

  15. Organic Functional Group Playing Card Deck

    Science.gov (United States)

    Welsh, Michael J.

    2003-04-01

    The recognition and identification of organic functional groups, while essential for chemistry and biology majors, is also very useful for non-science majors in the study of molecules in art and life. In order to make this task more palatable for the non-science major (art and communications students), the images of a traditional playing deck of cards (heart, spade, diamond, and club) have been replaced with four representations of common organic functional groups. The hierarchy rules for naming two groups in a molecule is loosely incorporated to represent the sequence (King, Queen, Jack, ?, Ace) of the deck. Students practice recognizing and identifying organic groups by playing simple card games of "Old Maid" and "Go Fish". To play games like "Poker" or "Gin", a student must not only recognize the functional groups, but also master a naming hierarchy for the organic groups.

  16. Sistem Pencatatan Kehadiran Berbasis Java Card

    Directory of Open Access Journals (Sweden)

    Lidya Octarina

    2010-12-01

    Full Text Available The purposes of this research are to prevent jockey in exams, reduce the occurrence of error in attendance record at practicum or exams, and reduce error in filling students' attendance status to the attendance system. Three main parts of software development method are used; analysis, design, and literature method. Current system survey, analysis of the survey findings, identify the information, and identifying system requirements are implemented in analysis method. The design method that is used in this research is Unified Modeling Language (UML. The using of attendance recording system that uses Java Card-based application makes students identity card has a new function as the tool to make attendance. Conclusion of the research has shown that it can prevent identity fraud, minimize the time wasted in attendance system, reduce the printing paper, and reduce tagging errors eligibility status exam of students. 

  17. ATM Card Cloning and Ethical Considerations.

    Science.gov (United States)

    Kaur, Paramjit; Krishan, Kewal; Sharma, Suresh K; Kanchan, Tanuj

    2018-05-01

    With the advent of modern technology, the way society handles and performs monetary transactions has changed tremendously. The world is moving swiftly towards the digital arena. The use of Automated Teller Machine (ATM) cards (credit and debit) has led to a "cash-less society" and has fostered digital payments and purchases. In addition to this, the trust and reliance of the society upon these small pieces of plastic, having numbers engraved upon them, has increased immensely over the last two decades. In the past few years, the number of ATM fraud cases has increased exponentially. With the money of the people shifting towards the digital platform, ATM skimming has become a problem that has eventually led to a global outcry. The present review discusses the serious repercussions of ATM card cloning and the associated privacy, ethical and legal concerns. The preventive measures which need to be taken and adopted by the government authorities to mitigate the problem have also been discussed.

  18. Enhancement of COPD biological networks using a web-based collaboration interface [v2; ref status: indexed, http://f1000r.es/5ew

    Directory of Open Access Journals (Sweden)

    The sbv IMPROVER project team (in alphabetical order

    2015-05-01

    Full Text Available The construction and application of biological network models is an approach that offers a holistic way to understand biological processes involved in disease. Chronic obstructive pulmonary disease (COPD is a progressive inflammatory disease of the airways for which therapeutic options currently are limited after diagnosis, even in its earliest stage. COPD network models are important tools to better understand the biological components and processes underlying initial disease development. With the increasing amounts of literature that are now available, crowdsourcing approaches offer new forms of collaboration for researchers to review biological findings, which can be applied to the construction and verification of complex biological networks. We report the construction of 50 biological network models relevant to lung biology and early COPD using an integrative systems biology and collaborative crowd-verification approach. By combining traditional literature curation with a data-driven approach that predicts molecular activities from transcriptomics data, we constructed an initial COPD network model set based on a previously published non-diseased lung-relevant model set. The crowd was given the opportunity to enhance and refine the networks on a website (https://bionet.sbvimprover.com/ and to add mechanistic detail, as well as critically review existing evidence and evidence added by other users, so as to enhance the accuracy of the biological representation of the processes captured in the networks. Finally, scientists and experts in the field discussed and refined the networks during an in-person jamboree meeting. Here, we describe examples of the changes made to three of these networks: Neutrophil Signaling, Macrophage Signaling, and Th1-Th2 Signaling. We describe an innovative approach to biological network construction that combines literature and data mining and a crowdsourcing approach to generate a comprehensive set of COPD

  19. Microprocessor Card for Cuban Series polarimeters Laserpol

    International Nuclear Information System (INIS)

    Arista Romeu, E.; Mora Mazorra, W.

    2012-01-01

    We present the design consists of a card based on a micro-processor 8-bit adds new software components and their basic living, which allow to deliver new services and expand the possibilities for use in other applications of the polarimeter LASERPOL series, as the polarimetric detection. Given the limitations of the original card it was necessary to introduce a series of changes that would allow to address new user requirements, and expand the possible applications of the instruments. This was done the expansion of the capacity of the EPROM and RAM memory, the decoder circuit was implemented memory map using a programmable integrated circuit, and introduced a real time clock with nonvolatile RAM, these features are exploited to the introduction of new features such as the realization of the polarimeter calibration by the user from a sample pattern or a calibration pattern used as a reference, and the incorporation of the time and date to the reports of measurements required industry for quality control processes. Card that is achieved along with the rest of the components is compatible with polarimeters LASERPOL 101M Series, 3M and LP4, pin to pin, which facilitates their incorporation into the polarimeters in operation in the industry 'in situ' replacement cards from previous models, allowing to extend the possibilities of statistical processing, precision and accuracy of the instruments. Improved measurements in the industry, resulting in significant savings by elimination of losses in production and raw materials. The improved response speed of reading the polarimeters LASERPOL Use and polarimetric detectors. (Author)

  20. THE CARD - CURRENCY WITH AND WITHOUT CASH

    Directory of Open Access Journals (Sweden)

    Nicoara Mihaela

    2012-12-01

    Full Text Available Use by individuals and businesses resulting in reduced cash cards in circulation, the corresponding increase in transfer payments and payments accounts also limit exchange risks and make effective use of currency. As a result, we have the effect of reducing cash in circulation. These advantages are also available for businesses and for banks and leads to favorable effects on import-export business. Following this, banks can diversify our products, so to meet customers' new products.

  1. 16 Cards to Get Into Computer Organization

    OpenAIRE

    Tabik, Siham; Romero, Luis F.

    2014-01-01

    This paper presents a novel educative activity for teaching computer architecture fundamentals. This activity is actually a game that uses 16 cards and involves about twenty active participant students. Executing this activity in the fi rst class of the course allows the studentin only 45 minutes to acquire the fundamental concepts of computer organization. The results of the surveys that evaluate the proposed activity together with the grades obtained by the students at the end of course...

  2. Data mining teaching throughout cards game competition

    OpenAIRE

    Antoñanzas-Torres, Javier; Urraca, Ruben; Sodupe-Ortega, Enrique; Martínez-de-Pison, Francisco; Pernía-Espinoza, Alpha

    2015-01-01

    [EN] Data-mining techniques and statistical metrics learning can be complicated because of the complexity and overwhelming nature of this field. In this paper a class competition to improve learning of designing Decision Support Systems (DSS) by playing a classic cards game named "Copo" is proposed. The fact that this game is based on a probabilistic problem and that different solutions can be obtained represents a very typical kind of problem in the field of engineering and compu...

  3. Some security strategies for smart cards

    Energy Technology Data Exchange (ETDEWEB)

    Ros, F [Gemalto, St Cyr en Val, BP 6021, 45060 Orlans Cedex (France); Harba, R [LESI, Polytech' Orlans-LESI, 12 rue de Blois, 45067 Orleans Cedex 2 (France)

    2007-07-15

    This paper details current developments at Gemalto in the field of security. It focuses on two different security processes for ID cards. The first one consists in adding observable security features in the ID image to allow quick visual verification and serves mainly to detect counterfeit attempts. The second consists in watermarking ID images during the pre personalization step by a secret key stored in the chip. The interest of the different approaches is demonstrated with several real ID images.

  4. Co-branding of payment cards

    OpenAIRE

    Přikryl, Jiří

    2012-01-01

    The bachelor thesis deals with possibilities and use of co-branding within the financial institutions. It mainly focuses on co-branding payment cards aiming both, the analysis of the current situation on the market for these products in the Czech Republic as well as the outline of their new usage opportunities. The theoretical part defines not only the basic concepts of the branding phenomenon but also more deeply characterizes its part called co-branding. The paper then offers fundamental in...

  5. Repeated extraction of DNA from FTA cards

    DEFF Research Database (Denmark)

    Stangegaard, Michael; Ferrero, Laura; Børsting, Claus

    2011-01-01

    Extraction of DNA using magnetic bead based techniques on automated DNA extraction instruments provides a fast, reliable and reproducible method for DNA extraction from various matrices. However, the yield of extracted DNA from FTA-cards is typically low. Here, we demonstrate that it is possible...... to repeatedly extract DNA from the processed FTA-disk. The method increases the yield from the nanogram range to the microgram range....

  6. The manuscript of Kartoteka (Card Index

    Directory of Open Access Journals (Sweden)

    Zbigniew Władysław Solski

    2009-01-01

    Full Text Available At the beginning of the 70s Tadeusz Różewicz presented the manuscript of Card Index to Professor Józef Kelera. It might have stayed a secret of friendship of the dramatist and the critic, however, Różewicz revealed the initials of his friend when in a commenatry to the play, he posed a question, whether there was a full stop after the last word in the manuscript or not? Posing this question, the author claimed the integrality of his masterpiece which was threatened by the widespread interpretations of Card Index as a play of a loose and dispersed structure. Appreciating the value of this question, I turned to Professor Kelera. This way I have had an access to the autograph of the play. In this manuscript has been preserved the play from before its final editing, which its author must surely have made during typing the text. Handwritten notes contain two unknown versions of the play with fragments which would not have been passed by the censors in the then Polish People’s Republic. In the reading of the manuscript the functions of the word and its graphic shape appeared of equal importance, so this version of Card Index can be recognised as a masterpiece of literature.

  7. Interface learning

    DEFF Research Database (Denmark)

    Thorhauge, Sally

    2014-01-01

    "Interface learning - New goals for museum and upper secondary school collaboration" investigates and analyzes the learning that takes place when museums and upper secondary schools in Denmark work together in local partnerships to develop and carry out school-related, museum-based coursework...... for students. The research focuses on the learning that the students experience in the interface of the two learning environments: The formal learning environment of the upper secondary school and the informal learning environment of the museum. Focus is also on the learning that the teachers and museum...... professionals experience as a result of their collaboration. The dissertation demonstrates how a given partnership’s collaboration affects the students’ learning experiences when they are doing the coursework. The dissertation presents findings that museum-school partnerships can use in order to develop...

  8. Programming a DSP card for generating an ECG signal with possibility of anomalies

    International Nuclear Information System (INIS)

    Hamrouni, Sayma

    2013-01-01

    This project consists of programming a DSP designed to generate an ECG signal with a probability of anomaly. To begin with, we get to know the characteristics of a DSP card and its architecture. As a second step, we programmed the DSP32C using the compiler D3CC associated with Textpad in order to obtain an analog signal in the respective outputs. And then finally, we developed a graphical user interface using the programming software LabVIEW that aims controlling the good operation of DSP. The tests previously made have proved the good operation of the application.

  9. Dynamic Sensor Networks

    National Research Council Canada - National Science Library

    Schott, Brian

    2004-01-01

    ...: Declarative Languages and Execution Environment includes topographical soldier interface and a sensor network simulation environment for algorithm development, deployment planning, and operational support. Finally, Task 3...

  10. A robust and novel dynamic-ID-based authentication scheme for care team collaboration with smart cards.

    Science.gov (United States)

    Chang, Ya-Fen; Chen, Chia-Chen; Chang, Pei-Yu

    2013-04-01

    Nowadays, users/patients may gain desired medical services on-line because of the rapid development of computer network technologies. Conventional healthcare services are provided by a single server. However, care team collaboration by integrating services is the key to improve financial and clinical performance. How a user/patient accesses desired medical services provided by multiple servers becomes a challenge to realize care team collaboration. User authentication plays an important role to protect resources or services from being accessed by unauthorized users. In this paper, we first discuss the perceived security drawbacks of pervasive smart-card-based remote user authentication schemes. Then, we propose a novel dynamic-ID-based user authentication scheme based on elliptic curve cryptosystem (ECC) for multi-server environment with smart cards. The proposed scheme ensures user anonymity and computational efficiency and complies with essential requirements of a secure smart-card-based authentication scheme for multi-server environment to enable care team collaboration.

  11. FELIX: the New Detector Interface for the ATLAS Experiment arXiv

    CERN Document Server

    Wu, Weihao

    During the next major shutdown (2019-2020), the ATLAS experiment at the LHC will adopt the Front-End Link eXchange (FELIX) system as the interface between the data acquisition, detector control and TTC (Timing, Trigger and Control) systems and new or updated trigger and detector front-end electronics. FELIX will function as a router between custom serial links from front-end ASICs and FPGAs to data collection and processing components via a commodity switched network. Links may aggregate many slower links or be a single high bandwidth link. FELIX will also forward the LHC bunch-crossing clock, fixed latency trigger accepts and resets received from the TTC system to front-end electronics. The FELIX system uses commodity server technology in combination with FPGA-based PCIe I/O cards. The FELIX servers will run a software routing platform serving data to network clients. Commodity servers connected to FELIX systems via the same network will run the new Software Readout Driver (SW ROD) infrastructure for event f...

  12. CTD² Dashboard: a searchable web interface to connect validated results from the Cancer Target Discovery and Development Network* | Office of Cancer Genomics

    Science.gov (United States)

    The Cancer Target Discovery and Development (CTD2) Network aims to use functional genomics to accelerate the translation of high-throughput and high-content genomic and small-molecule data towards use in precision oncology.

  13. Australian healthcare: a smart card for a clever country.

    Science.gov (United States)

    Morris, S; Cooper, J; Bomba, D; Brankovic, L; Miller, M; Pacheco, F

    1995-10-01

    In this paper we give an overview of smart card technology how a smart card could be used as a healthcare card and the benefits that would most likely result from doing so. The smart card memory can be zoned into different security levels. The top security zone may contain an individual's full medical history while the lowest security zone may contain the cardholders name and address. Access to the different zones depends on the level of security of the zone. The higher the security level the more restrictive the access method. Were smart cards adopted for the storage of medical histories it would change the form of medical information recorded, not merely convert paper files to electronic ones. Storage of an individual's medical history on a smart card raises important privacy issues. These privacy issues are discussed particularly as they relate to the Australian community.

  14. Credit card spending limit and personal finance: system dynamics approach

    Directory of Open Access Journals (Sweden)

    Mirjana Pejić Bach

    2014-03-01

    Full Text Available Credit cards have become one of the major ways for conducting cashless transactions. However, they have a long term impact on the well being of their owner through the debt generated by credit card usage. Credit card issuers approve high credit limits to credit card owners, thereby influencing their credit burden. A system dynamics model has been used to model behavior of a credit card owner in different scenarios according to the size of a credit limit. Experiments with the model demonstrated that a higher credit limit approved on the credit card decreases the budget available for spending in the long run. This is a contribution toward the evaluation of action for credit limit control based on their consequences.

  15. Firmware development and testing of the ATLAS IBL Back Of Crate card

    CERN Document Server

    Stramaglia, Maria Elena; The ATLAS collaboration

    2015-01-01

    ATLAS is one of the four big LHC experiments and currently its Pixel Detector was upgraded with a new innermost 4th layer: the Insertable B-Layer (IBL). The upgrade will result in better tracking efficiency and compensate radiation damages of the Pixel-Detector. Newly developed front-end electronics and the higher than originally planned LHC luminosity required a complete re-design of the Off Detector Electronics consisting of the Back Of Crate card (BOC) and the Read Out Driver (ROD). The main purpose of the BOC card is the distribution of the LHC clock to all Pixel Detector components as well as interfacing the detector and the higher level readout optically. The data-path to the detector is running a 40 MHz bi phase mark (BPM) encoded stream. The 160 MHz 8b10b encoded data path from the detector is phase and word aligned in the firmware and then forwarded to the ROD after decoding. The ROD will send out the processed data which is then forwarded to the higher level readout by the BOC card. An overview of t...

  16. IBM-PC based data acquisition system for a laser enhanced ionisation spectrometer using a low cost GPIB card

    International Nuclear Information System (INIS)

    Sampath Kumar, R.; Ravindranath, S.V.G.

    1992-01-01

    An IBM-PC based data acquisition system has been developed for the existing laser enhanced ionisation spectrometer in the Division. Here the boxcar averager (type SR 250) which integrates the spectrometer output is interfaced to an IBM-PC, converted into a GPIB controller with the help of a locally available GPIB card, (Dynalog Micro Systems make PCL 848) through the GPIB port of the computer interface module (SR 245). The menu driven software developed in BASIC, triggers the scan in the dye laser through its control port, collects data from the spectrometer, plots, displays and stores it on the hard disc for further use. (author). 6 refs., 18 figs., 2 appendixes

  17. Medical smart cards: health care access in your pocket.

    Science.gov (United States)

    Krohn, R W

    2000-01-01

    The wallet-sized medical smart card, embedded with a programmable computer chip, stores and transmits a cardholder's clinical, insurance coverage and biographical information. When fully deployed, smart cards will conduct many functions at the point of care, from claims submission to medical records updates in real time. Ultimately, the smart card will make the individual patient record and all clinical and economic transactions within that patient log as portable, accessible and secure as an ATM account.

  18. Designing minimum data sets of health smart card system

    OpenAIRE

    Mohtaram Nematollahi

    2014-01-01

    Introduction: Nowadays different countries benefit from health system based on health cards and projects related to smart cards. Lack of facilities which cover this technology is obvious in our society. This paper aims to design Minimum Data Sets of Health Smart Card System for Iran. Method: This research was an applied descriptive study. At first, we reviewed the same projects and guidelines of selected countries and the proposed model was designed in accordance to the country’s ...

  19. Modeling intelligent agent beliefs in a card game scenario

    Science.gov (United States)

    Gołuński, Marcel; Tomanek, Roman; WÄ siewicz, Piotr

    In this paper we explore the problem of intelligent agent beliefs. We model agent beliefs using multimodal logics of belief, KD45(m) system implemented as a directed graph depicting Kripke semantics, precisely. We present a card game engine application which allows multiple agents to connect to a given game session and play the card game. As an example simplified version of popular Saboteur card game is used. Implementation was done in Java language using following libraries and applications: Apache Mina, LWJGL.

  20. Young Generation Attitudes and Awareness Towards the Implementation of Smart Card in Bahrain: An Exploratory Study

    OpenAIRE

    Adel I. Al-Alawi; Mohammed A. Al-Amer

    2006-01-01

    SmartCards are one of the latest additions to the continuing list of advancements and innovations in the world of information and communication technology. A SmartCard resembles in size and shape to a normal credit card or bank ATM card, with a microprocessor chip implanted into the plastic card. These cards are used not just as identity cards, like the earliest versions of such cards, but hold a relatively huge amount of editable information including the card holder's bank data, e-purse, fi...

  1. Soft Interfaces

    International Nuclear Information System (INIS)

    Strzalkowski, Ireneusz

    1997-01-01

    This book presents an extended form of the 1994 Dirac Memorial Lecture delivered by Pierre Gilles de Gennes at Cambridge University. The main task of the presentation is to show the beauty and richness of structural forms and phenomena which are observed at soft interfaces between two media. They are much more complex than forms and phenomena existing in each phase separately. Problems are discussed including both traditional, classical techniques, such as the contact angle in static and dynamic partial wetting, as well as the latest research methodology, like 'environmental' scanning electron microscopes. The book is not a systematic lecture on phenomena but it can be considered as a compact set of essays on topics which particularly fascinate the author. The continuum theory widely used in the book is based on a deep molecular approach. The author is particularly interested in a broad-minded rheology of liquid systems at interfaces with specific emphasis on polymer melts. To study this, the author has developed a special methodology called anemometry near walls. The second main topic presented in the book is the problem of adhesion. Molecular processes, energy transformations and electrostatic interaction are included in an interesting discussion of the many aspects of the principles of adhesion. The third topic concerns welding between two polymer surfaces, such as A/A and A/B interfaces. Of great worth is the presentation of various unsolved, open problems. The kind of topics and brevity of description indicate that this book is intended for a well prepared reader. However, for any reader it will present an interesting picture of how many mysterious processes are acting in the surrounding world and how these phenomena are perceived by a Nobel Laureate, who won that prize mainly for his investigations in this field. (book review)

  2. Design and implementation of a smart card based billing system for ...

    African Journals Online (AJOL)

    A smart card based billing system for petroleum dispenser is just one of the many ways in which smart cards can be employed to make commerce efficient. It incorporates the use of smart card as its legal tender and a smart card reader embedded into the filling station dispenser design. The smart card reader processes the ...

  3. Determinants of debit cards acceptance: An empirical investigation

    International Nuclear Information System (INIS)

    Ismail, Shafinar; Adnan, Azimah; Azizi, Amsyar; Bakri, Mohamed Hariri; Zulkepli, Jafri

    2014-01-01

    These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry

  4. Determinants of debit cards acceptance: An empirical investigation

    Energy Technology Data Exchange (ETDEWEB)

    Ismail, Shafinar; Adnan, Azimah; Azizi, Amsyar [Faculty of Business and Management, Universiti Teknologi MARA, Melaka 75300 (Malaysia); Bakri, Mohamed Hariri [Faculty of Technology Management And Technopreneurship, Universiti Teknikal Malaysia, Melaka 76100 (Malaysia); Zulkepli, Jafri [Faculty of Quantitative Science, Universiti Utara Malaysia, Sintok Kedah (Malaysia)

    2014-12-04

    These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry.

  5. Introduction of card payment system in a merchant company

    OpenAIRE

    Štrukelj, Anja

    2015-01-01

    The thesis is about PCI DSS, which stands for Payment Card Industry Data Security Standard. PCI DSS represents a uniőed approach to the protection of sensitive card data and to prevention of abuses in the payment card industry. Implementation of the standard in the company provides a higher level of security, it maintains conődence, protection against abuse and consequently protection against őnancial losses and loss of reputation. When paying with credit cards, the őrst lin...

  6. Volume of Requests for Internet Medicare Replacement Cards

    Data.gov (United States)

    Social Security Administration — This dataset provides monthly volumes at the national level from federal fiscal year 2008 onwards for Internet Medicare Replacement Card. The dataset includes only...

  7. Determinants of debit cards acceptance: An empirical investigation

    Science.gov (United States)

    Ismail, Shafinar; Bakri, Mohamed Hariri; Zulkepli, Jafri; Adnan, Azimah; Azizi, Amsyar

    2014-12-01

    These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry.

  8. Impact of Closed-Loop Gift Card Promotions By Businesses

    Directory of Open Access Journals (Sweden)

    Kathryn W. Ernstberger

    2013-07-01

    Full Text Available At their inception, gift cards were sold by businesses to customers to give as gifts to others. More recently, gift cards are beingused strategically by businesses to manage and transform their relationships with customers. Of particular interest here is the closed-loop gift card that can only be redeemed at the business whose name is on it. This analysis discusses the impact of closed-loop gift card promotions and evaluates the impact of these promotions ontotal spending, lift and redemption rates.

  9. Interface Screenings

    DEFF Research Database (Denmark)

    Thomsen, Bodil Marie Stavning

    2015-01-01

    In Wim Wenders' film Until the End of the World (1991), three different diagrams for the visual integration of bodies are presented: 1) GPS tracking and mapping in a landscape, 2) video recordings layered with the memory perception of these recordings, and 3) data-created images from dreams...... and memories. From a transvisual perspective, the question is whether or not these (by now realized) diagrammatic modes involving the body in ubiquitous global media can be analysed in terms of the affects and events created in concrete interfaces. The examples used are filmic as felt sensations...

  10. Linking Management Actions to Interactive Ecosystem Report Cards via an Ontology

    Science.gov (United States)

    Alabri, A.; Newman, A.; Abal, E.; van Ingen, C.; Hunter, J.

    2008-12-01

    IINTRODUCTION The Health-e-Waterways Project is a three way collaboration between the University of Queensland, Microsoft Research and the Healthy Waterways Partnership (SEQ-HWP)(over 60 local government, state agency, universities, community and environmental organizations). The project is developing a highly innovative framework and set of services to enable streamlined access to an integrated collection of real- time, near-real-time and static datasets acquired through ecosystem monitoring programs in South East Queensland. Using a novel combination of semantic web technologies, scientific data servers, web services, GIS visualization interfaces and scientific workflows, we are enabling the sharing and integration of high quality data and models, through a combined integrated water information management system and Web portal. DYNAMIC GENERATION OF ECOSYSTEM HEALTH REPORT CARDS SEQ-HWP is responsible for the Ecosystem Health Monitoring Program (EHMP) in South East Queensland. This currently involves sampling 30 freshwater indicators at 100 sites twice a year and 250 estuarine/marine sites every month. The EHMP data sets are statistically aggregated and standardized to produce ecosystem health grades that are published annually in hard copy EHMP Report Cards. Politicians and planners use the report cards to make decisions with respect to land use, water quality, allocations and investments in water recycling plants etc. To date, these report cards have been largely produced manually, by calculating standardized scores (0-1) across 5 indicators and 16 indices (physical, chemical, nutrients, ecosystem processes, acquatic macroinvertebrates and fish) and grades from A-F for each catchment and season (spring and autumn). Currently this process takes about 5 months. For the past 6 months, we have been working with the SEQ-HWP staff, developing software services that will enable the report cards to be generated dynamically via a Web-based Map interface to an underlying

  11. User Interfaces for Cooperative Remote Design

    National Research Council Canada - National Science Library

    Hodges, Larry

    1998-01-01

    .... We seek to develop new methods to facilitate cooperative remote design utilizing both high-bandwidth networking capability and virtual reality with appropriate graphical interfaces to support the collaborative effort...

  12. The HEASARC graphical user interface

    Science.gov (United States)

    White, N.; Barrett, P.; Jacobs, P.; Oneel, B.

    1992-01-01

    An OSF/Motif-based graphical user interface has been developed to facilitate the use of the database and data analysis software packages available from the High Energy Astrophysics Science Archive Research Center (HEASARC). It can also be used as an interface to other, similar, routines. A small number of tables are constructed to specify the possible commands and command parameters for a given set of analysis routines. These tables can be modified by a designer to affect the appearance of the interface screens. They can also be dynamically changed in response to parameter adjustments made while the underlying program is running. Additionally, a communication protocol has been designed so that the interface can operate locally or across a network. It is intended that this software be able to run on a variety of workstations and X terminals.

  13. Network anomaly detection a machine learning perspective

    CERN Document Server

    Bhattacharyya, Dhruba Kumar

    2013-01-01

    With the rapid rise in the ubiquity and sophistication of Internet technology and the accompanying growth in the number of network attacks, network intrusion detection has become increasingly important. Anomaly-based network intrusion detection refers to finding exceptional or nonconforming patterns in network traffic data compared to normal behavior. Finding these anomalies has extensive applications in areas such as cyber security, credit card and insurance fraud detection, and military surveillance for enemy activities. Network Anomaly Detection: A Machine Learning Perspective presents mach

  14. Efficiency at Sorting Cards in Compressed Air

    Science.gov (United States)

    Poulton, E. C.; Catton, M. J.; Carpenter, A.

    1964-01-01

    At a site where compressed air was being used in the construction of a tunnel, 34 men sorted cards twice, once at normal atmospheric pressure and once at 3½, 2½, or 2 atmospheres absolute pressure. An additional six men sorted cards twice at normal atmospheric pressure. When the task was carried out for the first time, all the groups of men performing at raised pressure were found to yield a reliably greater proportion of very slow responses than the group of men performing at normal pressure. There was reliably more variability in timing at 3½ and 2½ atmospheres absolute than at normal pressure. At 3½ atmospheres absolute the average performance was also reliably slower. When the task was carried out for the second time, exposure to 3½ atmospheres absolute pressure had no reliable effect. Thus compressed air affected performance only while the task was being learnt; it had little effect after practice. No reliable differences were found related to age, to length of experience in compressed air, or to the duration of the exposure to compressed air, which was never less than 10 minutes at 3½ atmospheres absolute pressure. PMID:14180485

  15. Museets interface

    DEFF Research Database (Denmark)

    Pold, Søren

    2007-01-01

    Søren Pold gør sig overvejelser med udgangspunkt i museumsprojekterne Kongedragter.dk og Stigombord.dk. Han argumenterer for, at udviklingen af internettets interfaces skaber nye måder at se, forstå og interagere med kulturen på. Brugerne får nye medievaner og perceptionsmønstre, der må medtænkes i...... tilrettelæggelsen af den fremtidige formidling. Samtidig får museets genstande en ny status som flygtige ikoner i det digitale rum, og alt i alt inviterer det til, at museerne kan forholde sig mere åbent og eksperimenterende til egen praksis og rolle som kulturinstitution....

  16. Design and implementation of an automatic acquisition card with direct memory incrementing intended for a multichannel analyser

    International Nuclear Information System (INIS)

    Al-Ani, Tarik Hesen

    1984-01-01

    This study presents a contribution to the implementation of a multichannel analyser, based on recent technology in order to give elaborated results to the user. This instrument will be designed using modular cards compatible with an Intel, Multi-bus System. The main purpose of this thesis consists in the study and design of the logical card establishing automatically an histogram in the memory of a micro-computer (Direct Memory Increment or DMI). This card allows the connection of up to four analog to digital converters and does the incrementing of the data in memory at the address delivered by an analog to digital Wilkinson type converter (400 MHz) designed at CEA. It allows: - 4 independent inputs working simultaneously with an average input rate of 87500 events/second for 16000 channels of 2 32 bits and with a time resolution of 1 μs; - 3 acquisition modes: histogram, multi-scaling and list; - calculation of the real and live times independently for the 4 inputs. In addition, this card provides the interfacing capability for a line printer, a sample driver and a 'mouse'. (author) [fr

  17. Towards testability in smart card operating system design

    NARCIS (Netherlands)

    Hartel, Pieter H.; Cordonnier, V.; de Jong, Eduard K.; Quisquater, J.J.

    1994-01-01

    The operating system of a smart card is a safety critical system. Distributed in millions, smart cards with their small 8-bit CPU support applications where transferred values are only protected by the strength of a cryptographic protocol. This strength goes no further than the implementation of the

  18. Concretization and animation of Finite Automata with c-cards

    DEFF Research Database (Denmark)

    Valente, Andrea

    2004-01-01

    to classes of 10 to 12 years old, and in general to students with a limited mathematical background. Our approach builds on {\\em computational cards} (or c-cards), a project aiming at scaling-down the learning complexity of computer science core contents, by presenting symbol manipulation via a t...

  19. Predicting credit card behavior: a study in neuroeconomics.

    Science.gov (United States)

    Spinella, Marcello; Lester, David; Yang, Bijou

    2005-06-01

    In a sample of 139 community residents, credit card ownership was associated with age, sex, income, attitudes toward credit cards and toward money, and scores on a verbal measure of prefrontal cortical dysfunction, supporting a neuroeconomic approach to economic decision-making.

  20. Designing minimum data sets of health smart card system

    Directory of Open Access Journals (Sweden)

    Mohtaram Nematollahi

    2014-10-01

    Full Text Available Introduction: Nowadays different countries benefit from health system based on health cards and projects related to smart cards. Lack of facilities which cover this technology is obvious in our society. This paper aims to design Minimum Data Sets of Health Smart Card System for Iran. Method: This research was an applied descriptive study. At first, we reviewed the same projects and guidelines of selected countries and the proposed model was designed in accordance to the country’s needs, taking people’s attitude about it by Delphi technique. A data analysis in study stage of MDS(Minimum Data Sets of Health Smart Card in the selective countries was done by comparative tables and determination of similarities and differences of the MDS. In the stage of gaining credit for model, it was accomplished with descriptive statistics to the extent of absolute and relative frequency through SPSS (version 16. Results: MDS of Health Smart Card for Iran is presented in the patient’s card and health provider’s card on basisof studiesin America, Australia, Turkey and Belgium and needs of our country and after doing Delphi technique with 94 percent agreement confirmed. Conclusion: Minimum Data Sets of Health Smart Card provides continuous care for patients and communication among providers. So, it causes a decrease in the complications of threatening diseases. Collection of MDS of diseases increases the quality of care assessment