Expert systems

International Nuclear Information System (INIS)

Haldy, P.A.

1988-01-01

The definitions of the terms 'artificial intelligence' and 'expert systems', the methodology, areas of employment and limits of expert systems are discussed. The operation of an expert system is described, especially the presentation and organization of knowledge as well as interference and control. Methods and tools for expert system development are presented and their application in nuclear energy are briefly addressed. 7 figs., 2 tabs., 6 refs

Comparing the treatment of uncertainty in Bayesian networks and fuzzy expert systems used for a human reliability analysis application

International Nuclear Information System (INIS)

Baraldi, Piero; Podofillini, Luca; Mkrtchyan, Lusine; Zio, Enrico; Dang, Vinh N.

2015-01-01

The use of expert systems can be helpful to improve the transparency and repeatability of assessments in areas of risk analysis with limited data available. In this field, human reliability analysis (HRA) is no exception, and, in particular, dependence analysis is an HRA task strongly based on analyst judgement. The analysis of dependence among Human Failure Events refers to the assessment of the effect of an earlier human failure on the probability of the subsequent ones. This paper analyses and compares two expert systems, based on Bayesian Belief Networks and Fuzzy Logic (a Fuzzy Expert System, FES), respectively. The comparison shows that a BBN approach should be preferred in all the cases characterized by quantifiable uncertainty in the input (i.e. when probability distributions can be assigned to describe the input parameters uncertainty), since it provides a satisfactory representation of the uncertainty and its output is directly interpretable for use within PSA. On the other hand, in cases characterized by very limited knowledge, an analyst may feel constrained by the probabilistic framework, which requires assigning probability distributions for describing uncertainty. In these cases, the FES seems to lead to a more transparent representation of the input and output uncertainty. - Highlights: • We analyse treatment of uncertainty in two expert systems. • We compare a Bayesian Belief Network (BBN) and a Fuzzy Expert System (FES). • We focus on the input assessment, inference engines and output assessment. • We focus on an application problem of interest for human reliability analysis. • We emphasize the application rather than math to reach non-BBN or FES specialists

Distributed expert systems for nuclear reactor control

International Nuclear Information System (INIS)

Otaduy, P.J.

1992-01-01

A network of distributed expert systems is the heart of a prototype supervisory control architecture developed at the Oak Ridge National Laboratory (ORNL) for an advanced multimodular reactor. Eight expert systems encode knowledge on signal acquisition, diagnostics, safeguards, and control strategies in a hybrid rule-based, multiprocessing and object-oriented distributed computing environment. An interactive simulation of a power block consisting of three reactors and one turbine provides a realistic, testbed for performance analysis of the integrated control system in real-time. Implementation details and representative reactor transients are discussed

Expert system for the real-time management of alarms in an electric grid. Un systeme expert pour la gestion en temps reel des alarmes dans un reseau electrique

Energy Technology Data Exchange (ETDEWEB)

Girouard, P.

1987-01-01

A model-base expert system is presented for the processing of alarm messages in power networks' control centers. This alarm processor, called GESTAL, generates concise diagnoses identifying the causes(s) of network disturbances and describing the operation of the protection and alarm systems which operate to isolate faulty components. Essentially, the alarm processor is an agenda driven expert system which is composed of a model of the power network's alarm and protection systems as well as several sets of rules. Based on the nextwork model, graph structures are constructed which represent relationships between alarms as they are received. These graph structures are then analysed in order to diagnose the disturbances(s). The alarm processor has been developed using the ART 3.0 programming language in a Symbolics Lisp-machine environment. Background material on expert systems, electric power networks, and alarm processing software is included, as well as a description of GESTAL'S functional characteristics and design. 51 refs., 28 figs.

Using Expert System Rules to establish data on Intersec-tions and Turns in Road Networks

DEFF Research Database (Denmark)

Nielsen, Otto Anker; Simonsen, Nikolaj; Frederiksen, Rasmus Dyhr

1997-01-01

consuming and tedious data preparation together with the complexity of network updating is the main reason for this, as most applied software packages can do the necessary calculations. In this paper we report on the development of a procedure that can automate the task of adding data for intersection delay...... modelling to an existing network. The method requires a GIS-based network with link attributes as input data. The method has developed as an extension tool applicable to existing networks and therefore supply of additional data is normally not required.. By a set of ‘expert system rules’, the intersections...... are classified in a number of groups - such as prioritised and signalised intersections, wedges and Y-junctions - and the required input data for turn delay models is established. The method has been tested on large-scale networks with good results. Most of the required data could be satisfactory estimated...

THE ARCHITECTURE OF MULTI-COMPONENT DISTRIBUTED HYBRID EXPERT TRAINING SYSTEM

Directory of Open Access Journals (Sweden)

Оleh Shevchuk

2016-09-01

Full Text Available The paper reports on the design of a multi-component architecture of distributed hybrid expert training system that can be used for the study of knowledge base of both internal and external expert systems and artificial intelligence systems that are distributed on Internet servers and other computer networks. Expert training system is based on three groups of basic principles: cybernetic, reflecting experience of previous research of systems of artificial intelligence, expert training systems; pedagogical, determining the principles, on which pedagogical design and use of expert training systems are based; psychological, determining preconditious and understanding of pupils psychics, on which the processes of design and use of expert training systems in professional training of future specialists are based.It accounts for the efficient training through the distributed knowledge via the Internet, which greatly increases the didactic capabilities of the system.

EXPERT SYSTEMS

OpenAIRE

Georgiana Marin; Mihai Catalin Andrei

2011-01-01

In recent decades IT and computer systems have evolved rapidly in economic informatics field. The goal is to create user friendly information systems that respond promptly and accurately to requests. Informatics systems evolved into decision assisted systems, and such systems are converted, based on gained experience, in expert systems for creative problem solving that an organization is facing. Expert systems are aimed at rebuilding human reasoning on the expertise obtained from experts, sto...

The application of expert system : a review of research and applications

NARCIS (Netherlands)

Tan, C.F.; Wahidin, L.S.; Khalil, S.N.; Tamaldin, N.; Hu, J.; Rauterberg, G.W.M.

2016-01-01

The development of Artificial Intelligent (AI) technology system can be a wide scope; for an instant, there are rule-based expert system, frame-based expert system, fuzzy logic, neural network, genetic algorithm, etc. The remarkable achievement applications of AI has been reported in different

Expert System

DEFF Research Database (Denmark)

Hildebrandt, Thomas Troels; Cattani, Gian Luca

2016-01-01

An expert system is a computer system for inferring knowledge from a knowledge base, typically by using a set of inference rules. When the concept of expert systems was introduced at Stanford University in the early 1970s, the knowledge base was an unstructured set of facts. Today the knowledge b...... for the application of expert systems, but also raises issues regarding privacy and legal liability....

What is an expert? A systems perspective on expertise

Science.gov (United States)

Caley, Michael Julian; O'Leary, Rebecca A; Fisher, Rebecca; Low-Choy, Samantha; Johnson, Sandra; Mengersen, Kerrie

2014-01-01

Expert knowledge is a valuable source of information with a wide range of research applications. Despite the recent advances in defining expert knowledge, little attention has been given to how to view expertise as a system of interacting contributory factors for quantifying an individual's expertise. We present a systems approach to expertise that accounts for many contributing factors and their inter-relationships and allows quantification of an individual's expertise. A Bayesian network (BN) was chosen for this purpose. For illustration, we focused on taxonomic expertise. The model structure was developed in consultation with taxonomists. The relative importance of the factors within the network was determined by a second set of taxonomists (supra-experts) who also provided validation of the model structure. Model performance was assessed by applying the model to hypothetical career states of taxonomists designed to incorporate known differences in career states for model testing. The resulting BN model consisted of 18 primary nodes feeding through one to three higher-order nodes before converging on the target node (Taxonomic Expert). There was strong consistency among node weights provided by the supra-experts for some nodes, but not others. The higher-order nodes, “Quality of work” and “Total productivity”, had the greatest weights. Sensitivity analysis indicated that although some factors had stronger influence in the outer nodes of the network, there was relatively equal influence of the factors leading directly into the target node. Despite the differences in the node weights provided by our supra-experts, there was good agreement among assessments of our hypothetical experts that accurately reflected differences we had specified. This systems approach provides a way of assessing the overall level of expertise of individuals, accounting for multiple contributory factors, and their interactions. Our approach is adaptable to other situations where it

An investigation into the use of ''expert systems'' for system-wide diagnostics

International Nuclear Information System (INIS)

Booth, A.W.; Carroll, J.T.

1987-01-01

This paper has explained how expert systems function and how they might be used to provide a FASTBUS system-wide diagnostic program. The authors propose that the system be used to diagnose the FASTBUS system at FERMILAB's CDF experiment. There are many important areas which have not been addressed in great detail in this paper (such as the roles of the knowledge engineer and the expert during the knowledge acquisition phase), but the central idea of the embodiment of an expert skill in a computer is clear. Development of a system-wide diagnostic program requires building knowledge from all our system experts, into the system. To expand the expert system beyond its network diagnostic ability, to include finding faulty modules would be worthwhile. Having an ''intelligent'' assistant who is on shift 24 hours each day would relieve the ''real'' experts from laborious, time-consuming and sometimes repetitive tasks undertaken during the debugging process. The system could also provide a testbed for evaluation and comparison when considering future expert-system applications such as ''run-control'' and ''data analysis''. In the context of a system-wide diagnostic program, an ''expert system'' is not intended to replace human experts but simply to help them. It is envisaged that there will always be important interaction between the human expert and the ''expert system''. The incremental development of the ''expert system'' should ensure that it is useful in the short term (by debugging to the S.I./segment level for example), and even more useful in the medium to longer term as it acquires more and more knowledge and the ability to debug to the module level. Expert systems exist and are working successfully in many problem domains. See the bibliography for examples of ''expert systems'' built in the high energy physics environment

Expert Systems the Old Fashioned Way: Person to Person.

Science.gov (United States)

McCleary, Hunter; Mayer, William J.

1988-01-01

Describes the services of Teltech, Inc., which mimic the desirable attributes of artificial intelligence and expert systems via a "database" of 5,000 experts in technical areas and interactive literature searches executed by staff. Advantages and shortcomings of the network are exemplified by sample searches. Several sample menus and…

An expert system in medical diagnosis

International Nuclear Information System (INIS)

Raboanary, R.; Raoelina Andriambololona; Soffer, J.; Raboanary, J.

2001-01-01

Health problem is still a crucial one in some countries. It is so important that it becomes a major handicap in economic and social development. In order to solve this problem, we have conceived an expert system that we called MITSABO, which means TO HEAL, to help the physicians to diagnose tropical diseases. It is clear that by extending the data base and the knowledge base, we can extend the application of the software to more general areas. In our expert system, we used the concept of 'self organization' of neural network based on the determination of the eigenvalues and the eigenvectors associated to the correlation matrix XX t . The projection of the data on the two first eigenvectors gives a classification of the diseases which is used to get a first approach in the diagnosis of the patient. This diagnosis is improved by using an expert system which is built from the knowledge base.

A prototype nuclear emergency response decision making expert system

International Nuclear Information System (INIS)

Chang, C.; Shih, C.; Hong, M.; Yu, W.; Su, M.; Wang, S.

1990-01-01

A prototype of emergency response expert system developed for nuclear power plants, has been fulfilled by Institute of Nuclear Energy Research. Key elements that have been implemented for emergency response include radioactive material dispersion assessment, dynamic transportation evacuation assessment, and meteorological parametric forecasting. A network system consists of five 80386 Personal Computers (PCs) has been installed to perform the system functions above. A further project is still continuing to achieve a more complicated and fanciful computer aid integral emergency response expert system

The application of expert systems and neural networks to gas turbine prognostics and diagnostics

Energy Technology Data Exchange (ETDEWEB)

DePold, H.R.; Gass, F.D.

1999-10-01

Condition monitoring of engine gas generators plays an essential role in airline fleet management. Adaptive diagnostic systems are becoming available that interpret measured data, furnish diagnosis of problems, provide a prognosis of engine health for planning purposes, and rank engines for scheduled maintenance. More than four hundred operations worldwide currently use versions of the first or second generation diagnostic tools. Development of a third generation system is underway which will provide additional system enhancements and combine the functions of the existing tools. Proposed enhancements include the use of artificial intelligence to automate, improve the quality of the analysis, provide timely alerts, and the use of an Internet link for collaboration. One objective of these enhancements is to have the intelligent system do more of the analysis and decision making, while continuing to support the depth of analysis currently available at experienced operations. This paper presents recent developments in technology and strategies in engine condition monitoring including: (1) application of statistical analysis and artificial neural network filters to improve data quality, (2) neural networks for trend change detection, and classification to diagnose performance change, and (3) expert systems to diagnose, provide alerts and to rank maintenance action recommendations.

Combined expert system/neural networks method for process fault diagnosis

Science.gov (United States)

Reifman, Jaques; Wei, Thomas Y. C.

1995-01-01

A two-level hierarchical approach for process fault diagnosis is an operating system employs a function-oriented approach at a first level and a component characteristic-oriented approach at a second level, where the decision-making procedure is structured in order of decreasing intelligence with increasing precision. At the first level, the diagnostic method is general and has knowledge of the overall process including a wide variety of plant transients and the functional behavior of the process components. An expert system classifies malfunctions by function to narrow the diagnostic focus to a particular set of possible faulty components that could be responsible for the detected functional misbehavior of the operating system. At the second level, the diagnostic method limits its scope to component malfunctions, using more detailed knowledge of component characteristics. Trained artificial neural networks are used to further narrow the diagnosis and to uniquely identify the faulty component by classifying the abnormal condition data as a failure of one of the hypothesized components through component characteristics. Once an anomaly is detected, the hierarchical structure is used to successively narrow the diagnostic focus from a function misbehavior, i.e., a function oriented approach, until the fault can be determined, i.e., a component characteristic-oriented approach.

Combined expert system/neural networks method for process fault diagnosis

Science.gov (United States)

Reifman, J.; Wei, T.Y.C.

1995-08-15

A two-level hierarchical approach for process fault diagnosis of an operating system employs a function-oriented approach at a first level and a component characteristic-oriented approach at a second level, where the decision-making procedure is structured in order of decreasing intelligence with increasing precision. At the first level, the diagnostic method is general and has knowledge of the overall process including a wide variety of plant transients and the functional behavior of the process components. An expert system classifies malfunctions by function to narrow the diagnostic focus to a particular set of possible faulty components that could be responsible for the detected functional misbehavior of the operating system. At the second level, the diagnostic method limits its scope to component malfunctions, using more detailed knowledge of component characteristics. Trained artificial neural networks are used to further narrow the diagnosis and to uniquely identify the faulty component by classifying the abnormal condition data as a failure of one of the hypothesized components through component characteristics. Once an anomaly is detected, the hierarchical structure is used to successively narrow the diagnostic focus from a function misbehavior, i.e., a function oriented approach, until the fault can be determined, i.e., a component characteristic-oriented approach. 9 figs.

Feed type based expert systems in mineral processing plants

International Nuclear Information System (INIS)

Jamsa-Jounela, S.-L.; Laine, S.; Laurila, H.

1999-01-01

Artificial Intelligence includes excellent tools for the control and supervision of industrial processes. Several thousand industrial applications have been reported worldwide. Recently, the designers of the AI systems have begun to hybridize the intelligent techniques, expert systems, fuzzy logic and neural networks, to enhance the capability of the AI systems. Expert systems have proved to be ideal candidates especially for the control of mineral processes. As successful case projects, expert system based on on-line classification of the feed type is described in this paper. The essential feature of this expert system is the classification of different feed types and their distinct control strategies at the plant. In addition to the classification, the expert system has a database containing information about how to handle the determined feed type. This self-learning database scans historical process data to suggest the best treatment for the ore type under processing. The system has been tested in two concentrators, the Outokumpu Finnmines Oy, Hitura mine and Outokumpu Chrome Oy, Kemi mine. (author)

SELF: expert system for supporting verification of network operating constraints in power transmission planning

Energy Technology Data Exchange (ETDEWEB)

Cicoria, R; Migliardi, P [Ente Nazionale per l` Energia Elettrica, Milan (Italy); Pogliano, P [Centro Informazioni Studi Esperienze (CISE), Milan (Italy)

1995-06-01

Performing planned studies into very large HV transmission systems is a very complex task which requires the use of simulation models and the application of the heuristic acquired by expert palnners during previous studies. The ENEL Electric Research Center and the CISE Artificial Intelligence Section have developed a knowledge-based system, named SELF, which is aimed at supporting the transmission system palnner. SELF is capable of assisting the engineer both in finding the convergence of the load flow calculation and determining solutions that respect active power, voltage and VAR operating constraints. This paper describes the overall architecture of the system and shows its integration in a larger planning environment called SPIRA, currently utilized at ENEL. More details are given on the least completed modules, the redispatching and network reinforcement subsystems which deal with active power constraint verification.

Medical Expert Systems Survey

OpenAIRE

Abu-Nasser, Bassem S.

2017-01-01

International audience; There is an increased interest in the area of Artificial Intelligence in general and expert systems in particular. Expert systems are rapidly growing technology. Expert systems are a branch of Artificial Intelligence which is having a great impact on many fields of human life. Expert systems use human expert knowledge to solve complex problems in many fields such as Health, science, engineering, business, and weather forecasting. Organizations employing the technology ...

Artificial intelligence/expert (AI/EX) systems for steelworks pollution control

Energy Technology Data Exchange (ETDEWEB)

Schofield, N.; Le Louer, P.; Mirabile, D.; Hubner, R. [Corus UK Ltd., Rotherham (United Kingdom)

2002-07-01

The objectives of this project have been to develop and apply artificial intelligence and expert system (AI/EX) methods to improve the control and operational performance of steelworks' pollution control equipment and to assess the viability and benefits of using such systems in dynamic process plant applications. Four distinct sub-projects were carried out: an expert system incorporating knowledge-based rules and neural network simulations has been developed by Corus which provides plant personnel with a real-time condition monitoring tool for the plant. Abnormalities with plant operation are now instantly recognised and alarmed, allowing prioritised maintenance to increase plant availability. The LECES project focused on studies concerning three different sites in order to evaluate predictive emission monitoring systems using neural networks to replace conventional instrumental and controls in steelworks' combustion systems. VAI developed a software template for pollution control expert systems to demonstrate the transferability of AI/EX technology. This has been done through the development of a validated process database containing data from the Corus sub-project and the subsequent integration of this data with dynamic emission models to produce rules for input to an evaluation database. CSM developed a fuzzy logic controlled process management system applied to the biological treatment of coke-oven waste water. A pilot plant has been installed and results on simulations performed using the fuzzy logic system linked to a neural network simulator show that it is possible to obtain great advantages in the biological pilot plant performance.

Real time expert systems

International Nuclear Information System (INIS)

Asami, Tohru; Hashimoto, Kazuo; Yamamoto, Seiichi

1992-01-01

Recently, aiming at the application to the plant control for nuclear reactors and traffic and communication control, the research and the practical use of the expert system suitable to real time processing have become conspicuous. In this report, the condition for the required function to control the object that dynamically changes within a limited time is presented, and the technical difference between the real time expert system developed so as to satisfy it and the expert system of conventional type is explained with the actual examples and from theoretical aspect. The expert system of conventional type has the technical base in the problem-solving equipment originating in STRIPS. The real time expert system is applied to the fields accompanied by surveillance and control, to which conventional expert system is hard to be applied. The requirement for the real time expert system, the example of the real time expert system, and as the techniques of realizing real time processing, the realization of interruption processing, dispersion processing, and the mechanism of maintaining the consistency of knowledge are explained. (K.I.)

NESSUS/EXPERT - An expert system for probabilistic structural analysis methods

Science.gov (United States)

Millwater, H.; Palmer, K.; Fink, P.

1988-01-01

An expert system (NESSUS/EXPERT) is presented which provides assistance in using probabilistic structural analysis methods. NESSUS/EXPERT is an interactive menu-driven expert system that provides information to assist in the use of the probabilistic finite element code NESSUS/FEM and the fast probability integrator. NESSUS/EXPERT was developed with a combination of FORTRAN and CLIPS, a C language expert system tool, to exploit the strengths of each language.

Diagnostic expert system in the PF LINAC

International Nuclear Information System (INIS)

Abe, Isamu; Nakahara, Kazuo; Kitamura, Masaharu.

1992-01-01

A prototype diagnostic expert system (ES) was developed for the Photon Factory 2.5-GeV electron/positron LINAC injector system. The ES has been on-lined with the conventional linac computer network for receiving real data. This project was undertaken in an attempt to reduce the linac operator's mental workload, diagnosis duties, and to explore Artificial Intelligence (AI) technologies. The outlook for ES and its problems, and what has been achieved are outlined in this presentation. (author)

Expert systems in process control systems

International Nuclear Information System (INIS)

Wittig, T.

1987-01-01

To illustrate where the fundamental difference between expert systems in classical diagnosis and in industrial control lie, the work of process control instrumentation is used as an example for the job of expert systems. Starting from the general process of problem-solving, two classes of expert systems can be defined accordingly. (orig.) [de

Application of expert systems

Energy Technology Data Exchange (ETDEWEB)

Basden, A

1983-11-01

This article seeks to bring together a number of issues relevant to the application of expert systems by discussing their advantages and limitations, their roles and benefits, and the influence that real-life applications might have on the design of expert systems software. Part of the expert systems strategy of one major chemical company is outlined. Because it was in constructing one particular expert system that many of these issues became important this system is described briefly at the start of the paper and used to illustrate much of the later discussion. It is of the plausible-inference type and has application in the field of materials engineering. 22 references.

Development of expert evaluation system for advanced nuclear power stations

International Nuclear Information System (INIS)

Yang Mengjia; Ren Junsheng; Zhou Zhiwei; Zhang Qi; Zhu Shutang

2005-01-01

The wheels of the nuclear power industry in China are going to roll on the fast rails soon: It is important to establish an expert evaluation system for optimally selecting new types of NPPs in the future based on scientific evaluation. Under such a background, an expert evaluation system is developed to evaluate Various types of NPPs for the following two decades by taking into account the advices of selected top specialists in Chinese nuclear power industry, and by adopting different evaluation methods. The evaluation system is designed to use the database-MS-SQL Server or Oracle for manipulating experts' knowledge and objective data for scaling NPPs by user-selected evaluation methods for evaluating NPPs. The system includes two subsystems: one is called the Data Management Module and the other called the Evaluation Arithmetic Module. The Data Management Module is used to manage expert knowledge in forms of item marks of the NPPs given by experts of nuclear engineering. The Evaluation Arithmetic Module is used to analyze and deal with the evaluation based on the data in the Database by certain designed evaluation method, and to provide the evaluation results. Based on the users' selection, the evaluation of the NPPs is processed, and the results can be dynamically listed in table or displayed in graphics. So it can be used as a consulting tool to help users make optimal selection of prospective NPPs. The system is developed in architecture of the mixture framework C/S(Client/Server) and B/S(Browse/Server), thus is safe, advanced, extensible and user- friendly. The present system is computer network based, so it can be used not only in personal PC and local network, but also in the Web Server which can be browsed by remote users. To develop such an evaluation system is an initiative R and D project in Chinese nuclear R and D activities. Although the evaluation system is far from perfect, however, the preliminary evaluation results produced by the evaluation

Expert system in PNC, 5

International Nuclear Information System (INIS)

Tobita, Yoshimasa; Yamaguchi, Takashi; Matsumoto, Mitsuo; Ono, Kiyoshi.

1990-01-01

The computer code system which can evaluate the mass balance and cycle cost in nuclear fuel cycle has been developing a PNC using an artificial intelligence technique. This system is composed of the expert system, data base and analysis codes. The expert system is the most important one in the system and the content of the expert system is explained in this paper. The expert system has the three functions. The first is the function of understanding the meaning of user's questions by natural language, the second is the function of selecting the best way to solve the problem given by the user using the knowledge which is already installed in the system, and the last is the function of answering the questions. The knowledge of the experts installed in the expert system is represented by the frame-type rules. Therefore, the knowledge will be simply added to the system, and consequently the system will be easily extended. (author)

Expert System for Diagnosis of Hepatitis B Ibrahim Mailafiya, Fatima ...

African Journals Online (AJOL)

the rice plant appearing during their life span. [1]. ... use of intelligent systems such as fuzzy logic, artificial neural network and genetic algorithm have been developed [5]. ... The liver being the ..... doctors but to assist them in the quality ... P.Santosh Kumar Patra, An Expert System for Diagnosis of Human diseases, 2010.

Evaluating neural networks and artificial intelligence systems

Science.gov (United States)

Alberts, David S.

1994-02-01

Systems have no intrinsic value in and of themselves, but rather derive value from the contributions they make to the missions, decisions, and tasks they are intended to support. The estimation of the cost-effectiveness of systems is a prerequisite for rational planning, budgeting, and investment documents. Neural network and expert system applications, although similar in their incorporation of a significant amount of decision-making capability, differ from each other in ways that affect the manner in which they can be evaluated. Both these types of systems are, by definition, evolutionary systems, which also impacts their evaluation. This paper discusses key aspects of neural network and expert system applications and their impact on the evaluation process. A practical approach or methodology for evaluating a certain class of expert systems that are particularly difficult to measure using traditional evaluation approaches is presented.

Intelligent programs-expert systems

Energy Technology Data Exchange (ETDEWEB)

Gledhill, V X

1982-01-01

In recent years, computer scientists have developed what are called expert systems. These programs have three fundamental components: a knowledge base, which changes with experience; an inference engine which enables the program to make decisions; and an interface that allows the program to communicate with the person using the system. Expert systems have been developed successfully in areas such as medical diagnosis, geology, and computer maintenance. This paper describes the evolution and basic principles of expert systems and give some examples of their use.

Expert Systems for the Analytical Laboratory.

Science.gov (United States)

de Monchy, Allan R.; And Others

1988-01-01

Discusses two computer problem solving programs: rule-based expert systems and decision analysis expert systems. Explores the application of expert systems to automated chemical analyses. Presents six factors to consider before using expert systems. (MVL)

Counselor Expert System | Debretsion | Zede Journal

African Journals Online (AJOL)

An expert system plays an important role on alleviating primarily shortage of experts in a specific area of interest. With the help of an expert system, personnel with little expertise can solve problems that require expert knowledge. In this paper all major aspects of an expert system development have been presented.

Expert Systems for auditing management information systems

Directory of Open Access Journals (Sweden)

Gheroghe Popescu

2007-05-01

Full Text Available Expert systems are built with the help of: specialised programming languages or expert system generators (shell. But this structure was reached after tens of years of work and research, because expert systems are nothing but pragmatic capitalisation of the results of research carried out in artificial intelligence and theory of knowledge.

Expert Systems: An Overview for Teacher-Librarians.

Science.gov (United States)

Orwig, Gary; Barron, Ann

1992-01-01

Provides an overview of expert systems for teacher librarians. Highlights include artificial intelligence and expert systems; the development of the MYCIN medical expert system; rule-based expert systems; the use of expert system shells to develop a specific system; and how to select an appropriate application for an expert system. (11 references)…

ALICE Expert System

CERN Document Server

Ionita, C

2014-01-01

The ALICE experiment at CERN employs a number of human operators (shifters), who have to make sure that the experiment is always in a state compatible with taking Physics data. Given the complexity of the system and the myriad of errors that can arise, this is not always a trivial task. The aim of this paper is to describe an expert system that is capable of assisting human shifters in the ALICE control room. The system diagnoses potential issues and attempts to make smart recommendations for troubleshooting. At its core, a Prolog engine infers whether a Physics or a technical run can be started based on the current state of the underlying sub-systems. A separate C++ component queries certain SMI objects and stores their state as facts in a Prolog knowledge base. By mining the data stored in dierent system logs, the expert system can also diagnose errors arising during a run. Currently the system is used by the on-call experts for faster response times, but we expect it to be adopted as a standard tool by reg...

The basics of formation of expert systems for industry and science

Directory of Open Access Journals (Sweden)

Vidyaev Igor G.

2016-01-01

Full Text Available This paper considers the basics of development of a practice-oriented information system of examination of industrial and scientific projects realized in the field of machine building. The first part of the paper is devoted to the main problems which are necessary to solve while designing such systems. The methods of self-organisation and adaptation, the use of expert evaluations and other approaches, for instance, those connected with the study of various fundamental and applied aspects of intelligence control systems, were considered. The main problems that are solved when creating an effective system of the expert selection were structured and expounded. In addition, the information, based both on already existing models (DFD, BPMN and on modern approaches (a system approach, Delphi technique, artificial neural networks, concerning the creation of an effective system of expert evaluations was presented. A combination of the approved methods and new approaches allows adapting the system to different conditions of use.

Efficient network monitoring for large data acquisition systems

International Nuclear Information System (INIS)

Savu, D.O.; Martin, B.; Al-Shabibi, A.; Sjoen, R.; Batraneanu, S.M.; Stancu, S.N.

2012-01-01

Though constantly evolving and improving, the available network monitoring solutions have limitations when applied to the infrastructure of a high speed realtime data acquisition (DAQ) system. DAQ networks are particular computer networks where experts have to pay attention to both individual subsections as well as system wide traffic flows while monitoring the network. The ATLAS Network at the Large Hadron Collider (LHC) has more than 200 switches interconnecting 3500 hosts and totaling 8500 high speed links. The use of heterogeneous tools for monitoring various infrastructure parameters, in order to assure optimal DAQ system performance, proved to be a tedious and time consuming task for experts. To alleviate this problem we used our networking and DAQ expertise to build a flexible and scalable monitoring system providing an intuitive user interface with the same look and feel irrespective of the data provider that is used. Our system uses custom developed components for critical performance monitoring and seamlessly integrates complementary data from auxiliary tools, such as NAGIOS, information services or custom databases. A number of techniques (e.g. normalization, aggregation and data caching) were used in order to improve the user interface response time. The end result is a unified monitoring interface, for fast and uniform access to system statistics, which significantly reduced the time spent by experts for ad-hoc and post-mortem analysis. (authors)

Adaptive capture of expert knowledge

Energy Technology Data Exchange (ETDEWEB)

Barrett, C.L.; Jones, R.D. [Los Alamos National Lab., NM (United States); Hand, Un Kyong [Los Alamos National Lab., NM (United States)]|[US Navy (United States)

1995-05-01

A method is introduced that can directly acquire knowledge-engineered, rule-based logic in an adaptive network. This adaptive representation of the rule system can then replace the rule system in simulated intelligent agents and thereby permit further performance-based adaptation of the rule system. The approach described provides both weight-fitting network adaptation and potentially powerful rule mutation and selection mechanisms. Nonlinear terms are generated implicitly in the mutation process through the emergent interaction of multiple linear terms. By this method it is possible to acquire nonlinear relations that exist in the training data without addition of hidden layers or imposition of explicit nonlinear terms in the network. We smoothed and captured a set of expert rules with an adaptive network. The motivation for this was to (1) realize a speed advantage over traditional rule-based simulations; (2) have variability in the intelligent objects not possible by rule-based systems but provided by adaptive systems: and (3) maintain the understandability of rule-based simulations. A set of binary rules was smoothed and converted into a simple set of arithmetic statements, where continuous, non-binary rules are permitted. A neural network, called the expert network, was developed to capture this rule set, which it was able to do with zero error. The expert network is also capable of learning a nonmonotonic term without a hidden layer. The trained network in feedforward operation is fast running, compact, and traceable to the rule base.

Expert system technology for the military

International Nuclear Information System (INIS)

Franklin, J.E.; Carmody, C.L.; Buteau, B.L.; Keller, K.; Levitt, T.S.

1988-01-01

This paper is concerned with the applications of expert systems to complex military problems. A brief description of needs for expert systems in the military arena is given. A short tutorial on some of the elements of an expert system is found in Appendix I. An important aspect of expert systems concerns using uncertain information and ill-defined procedures. Many of the general techniques of dealing with uncertainty are described in Appendix II. These techniques include Bayesian certainty factors, Dempster-Shafer theory of uncertainty, and Zadeh's fuzzy set theory. The major portion of the paper addresses specific expert system examples such as resource allocation, identification of radar images, maintenance and troubleshooting of electronic equipment, and the interpretation and understanding of radar images. Extensions of expert systems to incorporate learning are examined in the context of military intelligence to determine the disposition, location, and intention of the adversary. The final application involves the use of distributed communicating cooperating expert systems for battle management. Finally, the future of expert systems and their evolving capabilities are discussed

Expert systems: An overview

International Nuclear Information System (INIS)

Verdejo, F.

1985-01-01

The purpose of this article is to introduce readers to the basic principles of rule-based expert systems. Four topics are discussed in subsequent sections: (1) Definition; (2) Structure of an expert system; (3) State of the art and (4) Impact and future research. (orig.)

ALICE Expert System

International Nuclear Information System (INIS)

Ionita, C; Carena, F

2014-01-01

The ALICE experiment at CERN employs a number of human operators (shifters), who have to make sure that the experiment is always in a state compatible with taking Physics data. Given the complexity of the system and the myriad of errors that can arise, this is not always a trivial task. The aim of this paper is to describe an expert system that is capable of assisting human shifters in the ALICE control room. The system diagnoses potential issues and attempts to make smart recommendations for troubleshooting. At its core, a Prolog engine infers whether a Physics or a technical run can be started based on the current state of the underlying sub-systems. A separate C++ component queries certain SMI objects and stores their state as facts in a Prolog knowledge base. By mining the data stored in different system logs, the expert system can also diagnose errors arising during a run. Currently the system is used by the on-call experts for faster response times, but we expect it to be adopted as a standard tool by regular shifters during the next data taking period

PRODIAG: Combined expert system/neural network for process fault diagnosis. Volume 1, Theory

Energy Technology Data Exchange (ETDEWEB)

Reifman, J.; Wei, T.Y.C.; Vitela, J.E.

1995-09-01

The function of the PRODIAG code is to diagnose on-line the root cause of a thermal-hydraulic (T-H) system transient with trace back to the identification of the malfunctioning component using the T-H instrumentation signals exclusively. The code methodology is based on the Al techniques of automated reasoning/expert systems (ES) and artificial neural networks (ANN). The research and development objective is to develop a generic code methodology which would be plant- and T-H-system-independent. For the ES part the only plant or T-H system specific code requirements would be implemented through input only and at that only through a Piping and Instrumentation Diagram (PID) database. For the ANN part the only plant or T-H system specific code requirements would be through the ANN training data for normal component characteristics and the same PID database information. PRODIAG would, therefore, be generic and portable from T-H system to T-H system and from plant to plant without requiring any code-related modifications except for the PID database and the ANN training with the normal component characteristics. This would give PRODIAG the generic feature which numerical simulation plant codes such as TRAC or RELAP5 have. As the code is applied to different plants and different T-H systems, only the connectivity information, the operating conditions and the normal component characteristics are changed, and the changes are made entirely through input. Verification and validation of PRODIAG would, be T-H system independent and would be performed only ``once``.

SEPI an expert system for plant design

International Nuclear Information System (INIS)

Carotenuto, M.; Corleto, P.; Landeyro, P.

1988-01-01

The availability and suitability of technological information is of great importance in every kind of design task, especially when safety and reliability considerations are involved. In this paper an ''expert system for plant design'' (SEPI), is presented, together with its first application to nuclear back-end plants. This system is available on ENEA computer network. It is thought to be used both to collect know-how developed in the field and to assist unskilled designers during selection, evaluation and dimensioning tasks. It attemps to reproduce the normal way of ''reasoning'' and acting, and provides some graphic facilities

Expert systems: A 5-year perspective

International Nuclear Information System (INIS)

MacAllister, D.J.; Day, R.; McCormack, M.D.

1996-01-01

This paper gives an overview of a major integrated oil company's experience with artificial intelligence (AI) over the last 5 years, with an emphasis on expert systems. The authors chronicle the development of an AI group, including details on development tool selection, project selection strategies, potential pitfalls, and descriptions of several completed expert systems. Small expert systems produced by teams of petroleum technology experts and experienced expert system developers that are focused in well-defined technical areas have produced substantial benefits and accelerated petroleum technology transfer

Extension of mixture-of-experts networks for binary classification of hierarchical data.

Science.gov (United States)

Ng, Shu-Kay; McLachlan, Geoffrey J

2007-09-01

For many applied problems in the context of medically relevant artificial intelligence, the data collected exhibit a hierarchical or clustered structure. Ignoring the interdependence between hierarchical data can result in misleading classification. In this paper, we extend the mechanism for mixture-of-experts (ME) networks for binary classification of hierarchical data. Another extension is to quantify cluster-specific information on data hierarchy by random effects via the generalized linear mixed-effects model (GLMM). The extension of ME networks is implemented by allowing for correlation in the hierarchical data in both the gating and expert networks via the GLMM. The proposed model is illustrated using a real thyroid disease data set. In our study, we consider 7652 thyroid diagnosis records from 1984 to early 1987 with complete information on 20 attribute values. We obtain 10 independent random splits of the data into a training set and a test set in the proportions 85% and 15%. The test sets are used to assess the generalization performance of the proposed model, based on the percentage of misclassifications. For comparison, the results obtained from the ME network with independence assumption are also included. With the thyroid disease data, the misclassification rate on test sets for the extended ME network is 8.9%, compared to 13.9% for the ME network. In addition, based on model selection methods described in Section 2, a network with two experts is selected. These two expert networks can be considered as modeling two groups of patients with high and low incidence rates. Significant variation among the predicted cluster-specific random effects is detected in the patient group with low incidence rate. It is shown that the extended ME network outperforms the ME network for binary classification of hierarchical data. With the thyroid disease data, useful information on the relative log odds of patients with diagnosed conditions at different periods can be

Expert systems and advanced automation for space missions operations

Science.gov (United States)

Durrani, Sajjad H.; Perkins, Dorothy C.; Carlton, P. Douglas

1990-01-01

Increased complexity of space missions during the 1980s led to the introduction of expert systems and advanced automation techniques in mission operations. This paper describes several technologies in operational use or under development at the National Aeronautics and Space Administration's Goddard Space Flight Center. Several expert systems are described that diagnose faults, analyze spacecraft operations and onboard subsystem performance (in conjunction with neural networks), and perform data quality and data accounting functions. The design of customized user interfaces is discussed, with examples of their application to space missions. Displays, which allow mission operators to see the spacecraft position, orientation, and configuration under a variety of operating conditions, are described. Automated systems for scheduling are discussed, and a testbed that allows tests and demonstrations of the associated architectures, interface protocols, and operations concepts is described. Lessons learned are summarized.

System and method for creating expert systems

Science.gov (United States)

Hughes, Peter M. (Inventor); Luczak, Edward C. (Inventor)

1998-01-01

A system and method provides for the creation of a highly graphical expert system without the need for programming in code. An expert system is created by initially building a data interface, defining appropriate Mission, User-Defined, Inferred, and externally-generated GenSAA (EGG) data variables whose data values will be updated and input into the expert system. Next, rules of the expert system are created by building appropriate conditions of the rules which must be satisfied and then by building appropriate actions of rules which are to be executed upon corresponding conditions being satisfied. Finally, an appropriate user interface is built which can be highly graphical in nature and which can include appropriate message display and/or modification of display characteristics of a graphical display object, to visually alert a user of the expert system of varying data values, upon conditions of a created rule being satisfied. The data interface building, rule building, and user interface building are done in an efficient manner and can be created without the need for programming in code.

A demonstration of expert systems applications in transportation engineering : volume I, transportation engineers and expert systems.

Science.gov (United States)

1987-01-01

Expert systems, a branch of artificial-intelligence studies, is introduced with a view to its relevance in transportation engineering. Knowledge engineering, the process of building expert systems or transferring knowledge from human experts to compu...

Expert systems in clinical microbiology.

Science.gov (United States)

Winstanley, Trevor; Courvalin, Patrice

2011-07-01

This review aims to discuss expert systems in general and how they may be used in medicine as a whole and clinical microbiology in particular (with the aid of interpretive reading). It considers rule-based systems, pattern-based systems, and data mining and introduces neural nets. A variety of noncommercial systems is described, and the central role played by the EUCAST is stressed. The need for expert rules in the environment of reset EUCAST breakpoints is also questioned. Commercial automated systems with on-board expert systems are considered, with emphasis being placed on the "big three": Vitek 2, BD Phoenix, and MicroScan. By necessity and in places, the review becomes a general review of automated system performances for the detection of specific resistance mechanisms rather than focusing solely on expert systems. Published performance evaluations of each system are drawn together and commented on critically.

Expert Systems as Tools for Technical Communicators.

Science.gov (United States)

Grider, Daryl A.

1994-01-01

Discusses expertise, what an expert system is, what an expert system shell is, what expert systems can and cannot do, knowledge engineering and technical communicators, and planning and managing expert system projects. (SR)

Expert system in PNC, 6

International Nuclear Information System (INIS)

Tsubota, Koji

1990-01-01

The application of Artificial Intelligence (AI) as a tool for mineral exploration started only a decade ago. The systems that have been reported are in the most cases the expert systems that can simulate the decision of the experts or help numerical calculation for more reasonable and/or fast decision making. PNC started the development of the expert system for uranium exploration in 1983. Since then, KOGITO, a expert system to find the favorability of the target area, has been developed. Two years ago, the second generation development, Intelligent Research Environment and Support System, IRESS was initiated aiming at the establishment of a total support system for a project evaluation. We will review our effort for development of our system and introduce the application of the Data directed Numerical method as a new tool to Ahnemland area in Australia. (author)

Expert Systems in Reference Services.

Science.gov (United States)

Roysdon, Christine, Ed.; White, Howard D., Ed.

1989-01-01

Eleven articles introduce expert systems applications in library and information science, and present design and implementation issues of system development for reference services. Topics covered include knowledge based systems, prototype development, the use of artificial intelligence to remedy current system inadequacies, and an expert system to…

The First Expert CAI System

Science.gov (United States)

Feurzeig, Wallace

1984-01-01

The first expert instructional system, the Socratic System, was developed in 1964. One of the earliest applications of this system was in the area of differential diagnosis in clinical medicine. The power of the underlying instructional paradigm was demonstrated and the potential of the approach for valuably supplementing medical instruction was recognized. Twenty years later, despite further educationally significant advances in expert systems technology and enormous reductions in the cost of computers, expert instructional methods have found very little application in medical schools.

Development of a diagnostic expert system for eddy current data analysis using applied artificial intelligence methods

International Nuclear Information System (INIS)

Upadhyaya, B.R.; Yan, W.; Henry, G.

1999-01-01

A diagnostic expert system that integrates database management methods, artificial neural networks, and decision-making using fuzzy logic has been developed for the automation of steam generator eddy current test (ECT) data analysis. The new system, known as EDDYAI, considers the following key issues: (1) digital eddy current test data calibration, compression, and representation; (2) development of robust neural networks with low probability of misclassification for flaw depth estimation; (3) flaw detection using fuzzy logic; (4) development of an expert system for database management, compilation of a trained neural network library, and a decision module; and (5) evaluation of the integrated approach using eddy current data. The implementation to field test data includes the selection of proper feature vectors for ECT data analysis, development of a methodology for large eddy current database management, artificial neural networks for flaw depth estimation, and a fuzzy logic decision algorithm for flaw detection. A large eddy current inspection database from the Electric Power Research Institute NDE Center is being utilized in this research towards the development of an expert system for steam generator tube diagnosis. The integration of ECT data pre-processing as part of the data management, fuzzy logic flaw detection technique, and tube defect parameter estimation using artificial neural networks are the fundamental contributions of this research. (orig.)

Development of a diagnostic expert system for eddy current data analysis using applied artificial intelligence methods

Energy Technology Data Exchange (ETDEWEB)

Upadhyaya, B.R.; Yan, W. [Tennessee Univ., Knoxville, TN (United States). Dept. of Nuclear Engineering; Behravesh, M.M. [Electric Power Research Institute, Palo Alto, CA (United States); Henry, G. [EPRI NDE Center, Charlotte, NC (United States)

1999-09-01

A diagnostic expert system that integrates database management methods, artificial neural networks, and decision-making using fuzzy logic has been developed for the automation of steam generator eddy current test (ECT) data analysis. The new system, known as EDDYAI, considers the following key issues: (1) digital eddy current test data calibration, compression, and representation; (2) development of robust neural networks with low probability of misclassification for flaw depth estimation; (3) flaw detection using fuzzy logic; (4) development of an expert system for database management, compilation of a trained neural network library, and a decision module; and (5) evaluation of the integrated approach using eddy current data. The implementation to field test data includes the selection of proper feature vectors for ECT data analysis, development of a methodology for large eddy current database management, artificial neural networks for flaw depth estimation, and a fuzzy logic decision algorithm for flaw detection. A large eddy current inspection database from the Electric Power Research Institute NDE Center is being utilized in this research towards the development of an expert system for steam generator tube diagnosis. The integration of ECT data pre-processing as part of the data management, fuzzy logic flaw detection technique, and tube defect parameter estimation using artificial neural networks are the fundamental contributions of this research. (orig.)

Operational expert system applications in Europe

CERN Document Server

Zarri, Gian Piero

1992-01-01

Operational Expert System Applications in Europe describes the representative case studies of the operational expert systems (ESs) that are used in Europe.This compilation provides examples of operational ES that are realized in 10 different European countries, including countries not usually examined in the standard reviews of the field.This book discusses the decision support system using several artificial intelligence tools; expert systems for fault diagnosis on computerized numerical control (CNC) machines; and expert consultation system for personal portfolio management. The failure prob

MARBLE: A system for executing expert systems in parallel

Science.gov (United States)

Myers, Leonard; Johnson, Coe; Johnson, Dean

1990-01-01

This paper details the MARBLE 2.0 system which provides a parallel environment for cooperating expert systems. The work has been done in conjunction with the development of an intelligent computer-aided design system, ICADS, by the CAD Research Unit of the Design Institute at California Polytechnic State University. MARBLE (Multiple Accessed Rete Blackboard Linked Experts) is a system of C Language Production Systems (CLIPS) expert system tool. A copied blackboard is used for communication between the shells to establish an architecture which supports cooperating expert systems that execute in parallel. The design of MARBLE is simple, but it provides support for a rich variety of configurations, while making it relatively easy to demonstrate the correctness of its parallel execution features. In its most elementary configuration, individual CLIPS expert systems execute on their own processors and communicate with each other through a modified blackboard. Control of the system as a whole, and specifically of writing to the blackboard is provided by one of the CLIPS expert systems, an expert control system.

Operational expert system applications in Canada

CERN Document Server

Suen, Ching Y

1992-01-01

This book is part of a new series on operational expert systems worldwide. Expert systems are now widely used in different parts of the world for various applications. The past four years have witnessed a steady growth in the development and deployment of expert systems in Canada. Research in this field has also gained considerable momentum during the past few years. However, the field of expert systems is still young in Canada. This book contains 13 chapters contributed by 31 experts from both universities and industries across Canada covering a wide range of applications related to electric

An expert system for uranium exploration

International Nuclear Information System (INIS)

Chhipa, V.K.; Sengupta, M.

1989-01-01

Artificial intelligence is an emerging technology in the field of computer application. Expert systems have been developed to imitate human intelligence and reasoning process. Expert systems have much scope of application in the decision making process in mineral exploration as such decisions are highly subjective and expert opinions are very helpful. This paper presents a small expert system to analyze the reasoning process in exploring for uranium deposits in sandstone

Expert system application education project

Science.gov (United States)

Gonzelez, Avelino J.; Ragusa, James M.

1988-01-01

Artificial intelligence (AI) technology, and in particular expert systems, has shown potential applicability in many areas of operation at the Kennedy Space Center (KSC). In an era of limited resources, the early identification of good expert system applications, and their segregation from inappropriate ones can result in a more efficient use of available NASA resources. On the other hand, the education of students in a highly technical area such as AI requires an extensive hands-on effort. The nature of expert systems is such that proper sample applications for the educational process are difficult to find. A pilot project between NASA-KSC and the University of Central Florida which was designed to simultaneously address the needs of both institutions at a minimum cost. This project, referred to as Expert Systems Prototype Training Project (ESPTP), provided NASA with relatively inexpensive development of initial prototype versions of certain applications. University students likewise benefit by having expertise on a non-trivial problem accessible to them at no cost. Such expertise is indispensible in a hands-on training approach to developing expert systems.

Network approaches for expert decisions in sports.

Science.gov (United States)

Glöckner, Andreas; Heinen, Thomas; Johnson, Joseph G; Raab, Markus

2012-04-01

This paper focuses on a model comparison to explain choices based on gaze behavior via simulation procedures. We tested two classes of models, a parallel constraint satisfaction (PCS) artificial neuronal network model and an accumulator model in a handball decision-making task from a lab experiment. Both models predict action in an option-generation task in which options can be chosen from the perspective of a playmaker in handball (i.e., passing to another player or shooting at the goal). Model simulations are based on a dataset of generated options together with gaze behavior measurements from 74 expert handball players for 22 pieces of video footage. We implemented both classes of models as deterministic vs. probabilistic models including and excluding fitted parameters. Results indicated that both classes of models can fit and predict participants' initially generated options based on gaze behavior data, and that overall, the classes of models performed about equally well. Early fixations were thereby particularly predictive for choices. We conclude that the analyses of complex environments via network approaches can be successfully applied to the field of experts' decision making in sports and provide perspectives for further theoretical developments. Copyright © 2011 Elsevier B.V. All rights reserved.

Expert systems and computer based industrial systems

International Nuclear Information System (INIS)

Dunand, R.

1989-01-01

Framentec is the artificial intelligence subsidiary of FRAMATOME. It is involved in expert-system activities of Shells, developments, methodology and software for maintenance (Maintex) and consulting and methodology. Specific applications in the nuclear field are presented. The first is an expert system to assist in the piping support design prototype, the second is an expert system that assists an ultrasonic testing operator in determining the nature of a welding defect and the third is a welding machine diagnosis advisor. Maintex is a software tool to provide assistance in the repair of complex industrial equipment. (author)

Preserving experience through expert systems

International Nuclear Information System (INIS)

Jelinek, J.B.; Weidman, S.H.

1989-01-01

Expert systems technology, one of the branches in the field of computerized artificial intelligence, has existed for >30 yr but only recently has been made available on commercially standard hardware and software platforms. An expert system can be defined as any method of encoding knowledge by representing that knowledge as a collection of facts or objects. Decisions are made by the expert program by obtaining data about the problem or situation and correlating encoded facts (knowledge) to the data until a conclusion can be reached. Such conclusions can be relayed to the end user as expert advice. Realizing the potential of this technology, General Electric (GE) Nuclear Energy (GENE) has initiated a development program in expert systems applications; this technology offers the potential for packaging, distributing, and preserving nuclear experience in a software form. The paper discusses application fields, effective applications, and knowledge acquisition and knowledge verification

Expert database system for quality control

Science.gov (United States)

Wang, Anne J.; Li, Zhi-Cheng

1993-09-01

There are more competitors today. Markets are not homogeneous they are fragmented into increasingly focused niches requiring greater flexibility in the product mix shorter manufacturing production runs and above allhigher quality. In this paper the author identified a real-time expert system as a way to improve plantwide quality management. The quality control expert database system (QCEDS) by integrating knowledge of experts in operations quality management and computer systems use all information relevant to quality managementfacts as well as rulesto determine if a product meets quality standards. Keywords: expert system quality control data base

Expert system for compressor maintenance support; Sistema especialista para apoio a manutencao de compressores

Energy Technology Data Exchange (ETDEWEB)

Silva, Jonny Carlos da [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil). Dept. de Engenharia Mecanica; Caletti, Luciano [KEOHPS - Knowledge Engineering on Hydraulic and Pneumatic System, SC (Brazil); Luna, Paulo de T.M. [Universidade Regional de Blumenau - FURB, SC (Brazil)

2004-07-01

The performance of critical machines in industrial processes, such as compressors used in industrial plants, is fundamental for overall company operation. In this context, it becomes strategic the application of methods and tools to support the operation and maintenance of the most relevant process equipment. Among these computational tools are the Expert Systems, which aim to emulate the decision making process of human experts in a specific knowledge domain. In Oil and Gas domain, an example of such tools is the SEGRED project, which combines expert system techniques with dynamic simulation of transport and distribution natural gas networks. The SECOMP project, Expert System for Compressor Maintenance, is considered a spin-off of the SEGRED. Its objective is to develop an expert system to support maintenance activities, aiming to increase reliability, improve performance and reduce maintenance and operational costs. This article presents the first phase of the SECOMP project, which is related to the development of an expert system prototype for corrective maintenance of natural gas reciprocating compressors. The paper discusses the context of this knowledge domain, the prototype development and its potential contribution in an industrial environment. (author)

NASDA knowledge-based network planning system

Science.gov (United States)

Yamaya, K.; Fujiwara, M.; Kosugi, S.; Yambe, M.; Ohmori, M.

1993-01-01

One of the SODS (space operation and data system) sub-systems, NP (network planning) was the first expert system used by NASDA (national space development agency of Japan) for tracking and control of satellite. The major responsibilities of the NP system are: first, the allocation of network and satellite control resources and, second, the generation of the network operation plan data (NOP) used in automated control of the stations and control center facilities. Up to now, the first task of network resource scheduling was done by network operators. NP system automatically generates schedules using its knowledge base, which contains information on satellite orbits, station availability, which computer is dedicated to which satellite, and how many stations must be available for a particular satellite pass or a certain time period. The NP system is introduced.

Expert system technology for nondestructive waste assay

International Nuclear Information System (INIS)

Becker, G.K.; Determan, J.C.

1998-01-01

Nondestructive assay waste characterization data generated for use in the National TRU Program must be of known and demonstrable quality. Each measurement is required to receive an independent technical review by a qualified expert. An expert system prototype has been developed to automate waste NDA data review of a passive/active neutron drum counter system. The expert system is designed to yield a confidence rating regarding measurement validity. Expert system rules are derived from data in a process involving data clustering, fuzzy logic, and genetic algorithms. Expert system performance is assessed against confidence assignments elicited from waste NDA domain experts. Performance levels varied for the active, passive shielded, and passive system assay modes of the drum counter system, ranging from 78% to 94% correct classifications

Computer Based Expert Systems.

Science.gov (United States)

Parry, James D.; Ferrara, Joseph M.

1985-01-01

Claims knowledge-based expert computer systems can meet needs of rural schools for affordable expert advice and support and will play an important role in the future of rural education. Describes potential applications in prediction, interpretation, diagnosis, remediation, planning, monitoring, and instruction. (NEC)

An expert system for turbogenerator diagnostics

International Nuclear Information System (INIS)

Bessenyei, Z.; Tomcsanyi, T.; Toth, Z.; Laczay, I.

1992-01-01

In 1990, an expert system for turbo-generator diagnostics (EST-D) was installed at the 3rd and 4th units of the Paks NPP (Hungary). The expert system is strongly integrated to the ARGUS II vibration monitoring and diagnostics system. The system works on IBM PC AT. The VEIKI's and the NPP's human experts were interviewed to fill up the knowledgebase. The system is able to identify 13 different faults of the parts of a turbogenerator. The knowledgebase consists of ca 200 rules. The rules were built in and the system was verified and validated using a model of the turbines and using the experiences gathered with ARGUS II during the last 3 years. The maintenance personnel is authorized to modify and/or extend the knowledgebase. The input data for evaluation come from measured vibration patterns produced by the ARGUS II system, database of events, and maintenance data input by the maintenance personnel. The expert system is based on the modified GENESYS 2.1 shell (developed by SZAMALK, Hungary). Some limitations from PC application were eliminated, and a new, independent explanation module and man-machine interface were developed. Using this man-machine interface, one of the basic goals of the expert system developments was achieved: the human experts contribution is not necessary for diagnoses. The operator of the diagnostics system is able to produce the reports of diagnoses. Of course the interface allows the human experts to see the diagnoses through. It should be mentioned, at the beginning of 1991, we installed a similar expert system at the 1st 1000 MW WWER type unit of the Kalinin NPP (Soviet Union). In this paper, the operation of the EST-D, the man-machine interface and the operational experiences of the first 4 months work are explained. 2 refs., 14 figs

Expert systems as decision tools

International Nuclear Information System (INIS)

Scott, C.K.

1989-01-01

The feasibility of using expert systems as an aid in regulatory compliance functions has been investigated. A literature review was carried out to identify applications of expert systems to regulatory affairs. A bibliography of the small literature on such applications was prepared. A prototype system, ARIES, was developed to demonstrate the use of an expert system as an aid to a Project Officer in assuring compliance with licence requirements. The system runs on a personal computer with a graphical interface. Extensive use is made of hypertext to link interrelated rules and requirements as well as to provide an explanation facility. Based on the performance of ARIES the development of a field version is recommended

The Methodology of Expert Audit in the Cloud Computing System

Directory of Open Access Journals (Sweden)

Irina Vladimirovna Mashkina

2013-12-01

Full Text Available The problem of information security audit in the cloud computing system is discussed. The methodology of the expert audit is described, it allows to estimate not only the value of information security risk level, but also operative value of information security risk level. The fuzzy cognitive maps and artificial neural network are used for solution of this problem.

Expert system for estimating LWR plutonium production

International Nuclear Information System (INIS)

Sandquist, G.M.

1988-01-01

An Artificial Intelligence-Expert System called APES (Analysis of Proliferation by Expert System) has been developed and tested to permit a non proliferation expert to evaluate the capability and capacity of a specified LWR reactor and PUREX reprocessing system for producing and separating plutonium even when system information may be limited and uncertain. APES employs an expert system coded in LISP and based upon an HP-RL (Hewlett Packard-Representational Language) Expert System Shell. The user I/O interface communicates with a blackboard and the knowledge base which contains the quantitative models required to describe the reactor, selected fission product production and radioactive decay processes, Purex reprocessing and ancillary knowledge

Expert system for fast reactor diagnostic

International Nuclear Information System (INIS)

Parcy, J.P.

1982-09-01

A general description of expert systems is given. The operation of a fast reactor is reviewed. The expert system to the diagnosis of breakdowns limited to the reactor core. The structure of the system is described: specification of the diagnostics; structure of the data bank and evaluation of the rules; specification of the prediagnostics and evaluation; explanation of the diagnostics; time evolution of the system; comparison with other expert systems. Applications to some cases of faults are finally presented [fr

Expert systems and nuclear safety

International Nuclear Information System (INIS)

Beltracchi, L.

1990-01-01

The US Nuclear Regulatory Commission (NRC) and the Electric Power Research Institute have initiated a broad-based exploration of means to evaluate the potential applications of expert systems in the nuclear industry. This exploratory effort will assess the use of expert systems to augment the diagnostic and decision-making capabilities of personnel with the goal of enhancing productivity, reliability, and performance. The initial research effort is the development and documentation of guidelines for verifying and validating (V and V) expert systems. An initial application of expert systems in the nuclear industry is to aid operations and maintenance personnel in decision-making tasks. The scope of the decision aiding covers all types of cognitive behavior consisting of skill, rule, and knowledge-based behavior. For example, procedure trackers were designed and tested to support rule-based behavior. Further, these systems automate many of the tedious, error-prone human monitoring tasks, thereby reducing the potential for human error. The paper version of the procedure contains the knowledge base and the rules and thus serves as the basis of the design verification of the procedure tracker. Person-in-the-loop tests serve as the basis for the validation of a procedure tracker. When conducting validation tests, it is important to ascertain that the human retains the locus of control in the use of the expert system

Delays and networked control systems

CERN Document Server

Hetel, Laurentiu; Daafouz, Jamal; Johansson, Karl

2016-01-01

This edited monograph includes state-of-the-art contributions on continuous time dynamical networks with delays. The book is divided into four parts. The first part presents tools and methods for the analysis of time-delay systems with a particular attention on control problems of large scale or infinite-dimensional systems with delays. The second part of the book is dedicated to the use of time-delay models for the analysis and design of Networked Control Systems. The third part of the book focuses on the analysis and design of systems with asynchronous sampling intervals which occur in Networked Control Systems. The last part of the book exposes several contributions dealing with the design of cooperative control and observation laws for networked control systems. The target audience primarily comprises researchers and experts in the field of control theory, but the book may also be beneficial for graduate students. .

Online-Expert: An Expert System for Online Database Selection.

Science.gov (United States)

Zahir, Sajjad; Chang, Chew Lik

1992-01-01

Describes the design and development of a prototype expert system called ONLINE-EXPERT that helps users select online databases and vendors that meet users' needs. Search strategies are discussed; knowledge acquisition and knowledge bases are described; and the Analytic Hierarchy Process (AHP), a decision analysis technique that ranks databases,…

Expert systems for superalloy studies

Science.gov (United States)

Workman, Gary L.; Kaukler, William F.

1990-01-01

There are many areas in science and engineering which require knowledge of an extremely complex foundation of experimental results in order to design methodologies for developing new materials or products. Superalloys are an area which fit well into this discussion in the sense that they are complex combinations of elements which exhibit certain characteristics. Obviously the use of superalloys in high performance, high temperature systems such as the Space Shuttle Main Engine is of interest to NASA. The superalloy manufacturing process is complex and the implementation of an expert system within the design process requires some thought as to how and where it should be implemented. A major motivation is to develop a methodology to assist metallurgists in the design of superalloy materials using current expert systems technology. Hydrogen embrittlement is disasterous to rocket engines and the heuristics can be very complex. Attacking this problem as one module in the overall design process represents a significant step forward. In order to describe the objectives of the first phase implementation, the expert system was designated Hydrogen Environment Embrittlement Expert System (HEEES).

Expert Game experiment predicts emergence of trust in professional communication networks.

Science.gov (United States)

Bendtsen, Kristian Moss; Uekermann, Florian; Haerter, Jan O

2016-10-25

Strong social capital is increasingly recognized as an organizational advantage. Better knowledge sharing and reduced transaction costs increase work efficiency. To mimic the formation of the associated communication network, we propose the Expert Game, where each individual must find a specific expert and receive her help. Participants act in an impersonal environment and under time constraints that provide short-term incentives for noncooperative behavior. Despite these constraints, we observe cooperation between individuals and the self-organization of a sustained trust network, which facilitates efficient communication channels with increased information flow. We build a behavioral model that explains the experimental dynamics. Analysis of the model reveals an exploitation protection mechanism and measurable social capital, which quantitatively describe the economic utility of trust.

Transnational issue-specific expert networking: A pathway to local policy change.

Science.gov (United States)

O'Brien, Cheryl

2015-12-01

This article reports on key findings from a study of subnational governments in Mexico and Nigeria (O'Brien, 2013). With empirical richness of the case study method and small-n statistical analysis across the subnational units for each country, this study asks: How can we push the needle toward more progressive policy change on violence against women in developing and democratizing contexts? This study finds that issue-specific expert networking is a civic pathway to subnational policy responsiveness in Mexico and Nigeria. The dynamics of this pathway illuminate local-global political connections, and this study shows how issue-specific expert networking is important for the diffusion of an international norm and policies on violence against women. Copyright © 2015 Elsevier Ltd. All rights reserved.

Strategy for Developing Expert-System-Based Internet Protocols (TCP/IP)

Science.gov (United States)

Ivancic, William D.

1997-01-01

The Satellite Networks and Architectures Branch of NASA's Lewis Research is addressing the issue of seamless interoperability of satellite networks with terrestrial networks. One of the major issues is improving reliable transmission protocols such as TCP over long latency and error-prone links. Many tuning parameters are available to enhance the performance of TCP including segment size, timers and window sizes. There are also numerous congestion avoidance algorithms such as slow start, selective retransmission and selective acknowledgment that are utilized to improve performance. This paper provides a strategy to characterize the performance of TCP relative to various parameter settings in a variety of network environments (i.e. LAN, WAN, wireless, satellite, and IP over ATM). This information can then be utilized to develop expert-system-based Internet protocols.

Cooperative expert system reasoning for waste remediations

International Nuclear Information System (INIS)

Bohn, S.J.; Pennock, K.A.; Franklin, A.L.

1991-12-01

The United States Department of Energy (DOE) is facing a large task in completing Remedial Investigations and Feasibility Studies (RI/FS) for hazardous waste sites across the nation. One of the primary objectives of an RI/FS is the specification of viable sequences of technology treatment trains which can provide implementable site solutions. We present a methodology which integrates expert system technology within an object-oriented framework to create a cooperative reasoning system designed to provide a comprehensive list of these implementable solutions. The system accomplishes its goal of specifying technology trains by utilizing a ''team'' of expert system objects. The system distributes the problem solving among the individual expert objects, and then coordinates the combination of individual decisions into a joint solution. Each expert object possesses the knowledge of an expert in a particular technology. An expert object can examine the parameters and characteristics of the waste site, seek information and support from other expert objects, and then make decisions concerning its own applicability. This methodology has at least two primary benefits. First, the creation of multiple expert objects provides a more direct mapping from the actual process to a software system, making the system easier to build. Second, the distribution of the inferencing among a number of loosely connected expert objects allows for a more robust and maintainable final product

Intelligent monitoring of water chemistry - Diagnostic expert system DIWATM

International Nuclear Information System (INIS)

Metzner, W.; Streit, K.

2002-01-01

For fast and comprehensive evaluation of power plant water chemistry conditions and reliable diagnosis in the event of disturbances considerable advantages are provided by employment of the Diagnostic Expert System DIWA. The interface to the process control system (I and C) and the integration of the DIWA system in the office PC network are the preconditions that DIWA operates as a monitoring system in real time. The performance of diagnosis, which are processed by a fuzzy-logic-supported knowledge base ensures not only the detection of all disturbances but also different analyses of the plant operation mode. By editing the knowledge base the Al of the system can increase without system programming. (authors)

Expert system aids transport regulation users

International Nuclear Information System (INIS)

Cheshire, R.D.; Straw, R.J.

1990-01-01

During late 1984 the IAEA Regulations were identified as an area of application for an expert system adviser which could offer many advantages. Over the following year some simple tests were carried out to examine its feasibility, but TRANAID did not get underway until 1986 when British Nuclear Fuels (BNFL) Corporate Management services were engaged on the product. By this time a greater choice of suitable software, in the form of expert system shells, had become available. After a number of trial systems the shell Leonardo was finally adopted for the final system. In order for TRANAID to emulate the expert it was necessary to spend time extracting and documenting the expert knowledge. This was a matter of investigating how the regulations are used and was achieved by a series of meetings including opportunity for the computer specialists to interview the regulations experts. There are several benefits in having an expert system advisor in this area. It is useful to both experienced and inexperienced users of regulations. For those who are learning to use the regulations it is an excellent training aid. For those who know the regulations but use them infrequently it can save time and provide a valuable reassurance. The adviser has enabled the expert user's know how to be captured and to be made widely available to those with less experience. (author)

Expert systems in clinical practice

International Nuclear Information System (INIS)

Renaud-Salis, J.L.

1987-01-01

The first expert systems prototypes intended for advising physicians on diagnosis or therapy selection have been designed more than ten years ago. However, a few of them are already in use in clinical practice after years of research and development efforts. The capabilities of these systems to reason symbolically and to mimic the hypothetico-deductive processes used by physicians distinguishes them from conventional computer programs. Their power comes from their knowledge-base which embeds a large quantity of high-level, specialized knowledge captured from medical experts. Common methods for knowledge representation include production rules and frames. These methods also provide a mean for organizing and structuring the knowledge according to hierarchical or causal links. The best expert-systems perform at the level of the experts. They are easy to learn and use, and can communicate with the user in pseudo-natural language. Moreover they are able to explain their line of reasoning. These capabilities make them potentially useful, usable and acceptable by physicians. However if the problems related to difficulties and costs in building expert-systems are on the way to be solved within the next few years, forensic and ethical issues should have to be addressed before one can envisage their routine use in clinical practice [fr

Howard University Energy Expert Systems Institute Summer Program (EESI)

Science.gov (United States)

Momoh, James A.; Chuku, Arunsi; Abban, Joseph

1996-01-01

Howard University, under the auspices of the Center for Energy Systems and Controls runs the Energy Expert Systems Institute (EESI) summer outreach program for high school/pre-college minority students. The main objectives are to introduce precollege minority students to research in the power industry using modern state-of-the-art technology such as Expert Systems, Fuzzy Logic and Artificial Neural Networks; to involve minority students in space power management, systems and failure diagnosis; to generate interest in career options in electrical engineering; and to experience problem-solving in a teamwork environment consisting of faculty, senior research associates and graduate students. For five weeks the students are exposed not only to the exciting experience of college life, but also to the inspiring field of engineering, especially electrical engineering. The program consists of lectures in the fundamentals of engineering, mathematics, communication skills and computer skills. The projects are divided into mini and major. Topics for the 1995 mini projects were Expert Systems for the Electric Bus and Breast Cancer Detection. Topics on the major projects include Hybrid Electric Vehicle, Solar Dynamics and Distribution Automation. On the final day, designated as 'EESI Day' the students did oral presentations of their projects and prizes were awarded to the best group. The program began in the summer of 1993. The reaction from the students has been very positive. The program also arranges field trips to special places of interest such as the NASA Goddard Space Center.

CLIPS based decision support system for water distribution networks

Directory of Open Access Journals (Sweden)

K. Sandeep

2011-10-01

Full Text Available The difficulty in knowledge representation of a water distribution network (WDN problem has contributed to the limited use of artificial intelligence (AI based expert systems (ES in the management of these networks. This paper presents a design of a Decision Support System (DSS that facilitates "on-demand'' knowledge generation by utilizing results of simulation runs of a suitably calibrated and validated hydraulic model of an existing aged WDN corresponding to emergent or even hypothetical but likely scenarios. The DSS augments the capability of a conventional expert system by integrating together the hydraulic modelling features with heuristics based knowledge of experts under a common, rules based, expert shell named CLIPS (C Language Integrated Production System. In contrast to previous ES, the knowledge base of the DSS has been designed to be dynamic by superimposing CLIPS on Structured Query Language (SQL. The proposed ES has an inbuilt calibration module that enables calibration of an existing (aged WDN for the unknown, and unobservable, Hazen-Williams C-values. In addition, the daily run and simulation modules of the proposed ES further enable the CLIPS inference engine to evaluate the network performance for any emergent or suggested test scenarios. An additional feature of the proposed design is that the DSS integrates computational platforms such as MATLAB, open source Geographical Information System (GIS, and a relational database management system (RDBMS working under the umbrella of the Microsoft Visual Studio based common user interface. The paper also discusses implementation of the proposed framework on a case study and clearly demonstrates the utility of the application as an able aide for effective management of the study network.

Fire Effects, Education, and Expert Systems

Science.gov (United States)

Robert E. Martin

1987-01-01

Predicting the effects of fires in the year 2000 and beyond will be enhanced by the use of expert systems. Although our predictions may have broad confidence limits, expert systems should help us to improve the predictions and to focus on the areas where improved knowledge is most needed. The knowledge of experts can be incorporated into previously existing knowledge...

ART-Ada: An Ada-based expert system tool

Science.gov (United States)

Lee, S. Daniel; Allen, Bradley P.

1991-01-01

The Department of Defense mandate to standardize on Ada as the language for software systems development has resulted in increased interest in making expert systems technology readily available in Ada environments. NASA's Space Station Freedom is an example of the large Ada software development projects that will require expert systems in the 1990's. Another large scale application that can benefit from Ada based expert system tool technology is the Pilot's Associate (PA) expert system project for military combat aircraft. Automated Reasoning Tool (ART) Ada, an Ada Expert system tool is described. ART-Ada allow applications of a C-based expert system tool called ART-IM to be deployed in various Ada environments. ART-Ada is being used to implement several prototype expert systems for NASA's Space Station Freedom Program and the U.S. Air Force.

Methodology toward second generation expert systems

International Nuclear Information System (INIS)

Dormoy, J.L.

1989-01-01

So-called First Generation Expert Systems were aimed at capturing the expert's know-how. Though providing remarkable achievements, this first wave did not give the expected outcome. A new generation is getting out from the laboratories. Instead of remaining at a shallow level of knowledge - that is the unmotivated reasoning processes expressed by an expert when he is forced to tell them - one attempts to re-build this level of knowledge from the first principles which constitute the basis of an expert's knowledge. These systems are called deep knowledge-based, or second generation expert systems. Discussion in the three first parts rests on two examples: A first generation and a half system for process control in nuclear powers plants, than the system EXTRA for alarm processing in nuclear plants, wherein fonctional knowledge is explicitely represented. We show how deep knowledge can be implemented, and the advantages that can be expected from this methodology. Qualitative Physics is discussed in the next part. Future research developments as well as potential payoffs are mentioned [fr

Study on advanced nuclear power plants expert evaluation system in China

International Nuclear Information System (INIS)

Zhang Qi; Yoshikawa, Hidekazu; Shimoda, Hiroshi; Zhou Zhiwei; Zhu Shutang; Ren Junsheng; Yang Mengjia; Gu Junyang

2005-01-01

Based on current status and developing trend of nuclear power plant technology, an evaluation software system is developed to assess advanced NPPs systematically according to a set of pre-established evaluation indices. The selection and classification of the indices, the determination of their weighting factors in applying AHP (analytic hierarchy process) method are discussed. The Fuzzy Comprehensive method and the Fuzzy Borda Number method are studied in detail. The original input data required by the evaluation system are deduced from the expert survey sheets Evaluation results with common significance of public attraction are discussed and analyzed according to the opinions of different experts grouped by age, profession and working expertise etc. The evaluation system is computer network based with high flexible and user friendly human-machine interface on which it is easy to manipulate and update the evaluation system, and to display evaluation results as well. (author)

20 CFR 405.10 - Medical and Vocational Expert System.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Medical and Vocational Expert System. 405.10... Vocational Expert System. (a) General. The Medical and Vocational Expert System is comprised of the Medical... Vocational Expert System. (3) Experts who provide evidence at your request. Experts whom you ask to provide...

Expert systems: an alternative paradigm

Energy Technology Data Exchange (ETDEWEB)

Coombs, M.; Alty, J.

1984-01-01

There has recently been a significant effort by the AI community to interest industry in the potential of expert systems. However, this has resulted in far fewer substantial applications projects than might be expected. This article argues that this is because human experts are rarely required to perform the role that computer-based experts are programmed to adopt. Instead of being called in to answer well-defined problems, they are more often asked to assist other experts to extend and refine their understanding of a problem area at the junction of their two domains of knowledge. This more properly involves educational rather than problem-solving skills. An alternative approach to expert system design is proposed based upon guided discovery learning. The user is provided with a supportive environment for a particular class of problem, the system predominantly acting as an adviser rather than directing the interaction. The environment includes a database of domain knowledge, a set of procedures for its application to a concrete problem, and an intelligent machine-based adviser to judge the user's effectiveness and advise on strategy. The procedures focus upon the use of user generated explanations both to promote the application of domain knowledge and to expose understanding difficulties. Simple database PROLOG is being used as the subject material for the prototype system which is known as MINDPAD. 30 references.

Liquid low level waste management expert system

International Nuclear Information System (INIS)

Ferrada, J.J.; Abraham, T.J.; Jackson, J.R.

1991-01-01

An expert system has been developed as part of a new initiative for the Oak Ridge National Laboratory (ORNL) systems analysis program. This expert system will aid in prioritizing radioactive waste streams for treatment and disposal by evaluating the severity and treatability of the problem, as well as the final waste form. The objectives of the expert system development included: (1) collecting information on process treatment technologies for liquid low-level waste (LLLW) that can be incorporated in the knowledge base of the expert system, and (2) producing a prototype that suggests processes and disposal technologies for the ORNL LLLW system. 4 refs., 9 figs

Paradigms and building tools for real-time expert systems

International Nuclear Information System (INIS)

Behrens, U.; Flasinski, M.; Hagge, L.; Ohrenberg, K.

1994-01-01

An expert system is a software which can simulate the problem solving behavior of a human expert. The rule-based paradigm is chosen to describe the different aspects involved in expert system development. Differences between expert systems and common procedural or object-oriented programs are investigated. Expert system shells are introduced as a building tool for expert systems, together with some guidelines on the evaluation of such shells. A discussion of special needs for real-time expert system development concludes the paper

Automated high resolution mapping of coffee in Rwanda using an expert Bayesian network

Science.gov (United States)

Mukashema, A.; Veldkamp, A.; Vrieling, A.

2014-12-01

African highland agro-ecosystems are dominated by small-scale agricultural fields that often contain a mix of annual and perennial crops. This makes such systems difficult to map by remote sensing. We developed an expert Bayesian network model to extract the small-scale coffee fields of Rwanda from very high resolution data. The model was subsequently applied to aerial orthophotos covering more than 99% of Rwanda and on one QuickBird image for the remaining part. The method consists of a stepwise adjustment of pixel probabilities, which incorporates expert knowledge on size of coffee trees and fields, and on their location. The initial naive Bayesian network, which is a spectral-based classification, yielded a coffee map with an overall accuracy of around 50%. This confirms that standard spectral variables alone cannot accurately identify coffee fields from high resolution images. The combination of spectral and ancillary data (DEM and a forest map) allowed mapping of coffee fields and associated uncertainties with an overall accuracy of 87%. Aggregated to district units, the mapped coffee areas demonstrated a high correlation with the coffee areas reported in the detailed national coffee census of 2009 (R2 = 0.92). Unlike the census data our map provides high spatial resolution of coffee area patterns of Rwanda. The proposed method has potential for mapping other perennial small scale cropping systems in the East African Highlands and elsewhere.

Filtering and control of wireless networked systems

CERN Document Server

Zhang, Dan; Yu, Li

2017-01-01

This self-contained book, written by leading experts, offers a cutting-edge, in-depth overview of the filtering and control of wireless networked systems. It addresses the energy constraint and filter/controller gain variation problems, and presents both the centralized and the distributed solutions. The first two chapters provide an introduction to networked control systems and basic information on system analysis. Chapters (3–6) then discuss the centralized filtering of wireless networked systems, presenting different approaches to deal with energy efficiency and filter/controller gain variation problems. The next part (chapters 7–10) explores the distributed filtering of wireless networked systems, addressing the main problems of energy constraint and filter gain variation. The final part (chapters 11–14) focuses on the distributed control of wireless networked systems. networked systems for communication and control applications, the bo...

The local-regional networks of radiation protection experts: a necessary tool to strengthen

International Nuclear Information System (INIS)

Barbey, P.; Boirie, G.; Barret, Ch.; Barrey, N.

2008-01-01

After having recalled the evolution of the legal framework concerning radioprotection and the origin, role and training of the radiation protection experts (PCR in French for Personne Competente en Radioprotection), the author describes the difficulties faced by a PCR on a daily basis. Then, he outlines the interest of a development of local-regional networks between these professionals to promote information transmission and exchange, knowledge updating and so on, and even also to break the isolation of the PCR. He indicates the main objectives of these networks and evokes perspectives, notably after the professional meetings which have been and still are organized twice a year. Two additional and short papers briefly describe the life of one of these networks (the APCRAP, Association des personnes competentes en radioprotection de l'Assistance Publique, association of radiation protection experts belonging to public care services) and briefly present the objectives of the south-western network

Expert system for nuclear power plant feedwater system diagnosis

International Nuclear Information System (INIS)

Meguro, R.; Kinoshita, Y.; Sato, T.; Yokota, Y.; Yokota, M.

1987-01-01

The Expert System for Nuclear Power Plant Feedwater System Diagnosis has been developed to assist maintenance engineers in nuclear power plants. This system adopts the latest process computer TOSBAC G8050 and the expert system developing tool TDES2, and has a large scale knowledge base which consists of the expert knowledge and experience of engineers in many fields. The man-machine system, which has been developed exclusively for diagnosis, improves the man-machine interface and realizes the graphic displays of diagnostic process and path, stores diagnostic results and searches past reference

PSG-EXPERT. An expert system for the diagnosis of sleep disorders.

Science.gov (United States)

Fred, A; Filipe, J; Partinen, M; Paiva, T

2000-01-01

This paper describes PSG-EXPERT, an expert system in the domain of sleep disorders exploring polysomnographic data. The developed software tool is addressed from two points of view: (1)--as an integrated environment for the development of diagnosis-oriented expert systems; (2)--as an auxiliary diagnosis tool in the particular domain of sleep disorders. Developed over a Windows platform, this software tool extends one of the most popular shells--CLIPS (C Language Integrated Production System) with the following features: backward chaining engine; graph-based explanation facilities; knowledge editor including a fuzzy fact editor and a rules editor, with facts-rules integrity checking; belief revision mechanism; built-in case generator and validation module. It therefore provides graphical support for knowledge acquisition, edition, explanation and validation. From an application domain point of view, PSG-Expert is an auxiliary diagnosis system for sleep disorders based on polysomnographic data, that aims at assisting the medical expert in his diagnosis task by providing automatic analysis of polysomnographic data, summarising the results of this analysis in terms of a report of major findings and possible diagnosis consistent with the polysomnographic data. Sleep disorders classification follows the International Classification of Sleep Disorders. Major features of the system include: browsing on patients data records; structured navigation on Sleep Disorders descriptions according to ASDA definitions; internet links to related pages; diagnosis consistent with polysomnographic data; graphical user-interface including graph-based explanatory facilities; uncertainty modelling and belief revision; production of reports; connection to remote databases.

A fault diagnosis and operation advising cooperative expert system based on multi-agent technology

Energy Technology Data Exchange (ETDEWEB)

Zhao, W.; Bai, X.; Ding, J.; Fang, Z.; Li, Z. [China Electric Power Research Inst., Haidian District, Beijing (China)

2006-07-01

Power systems are becoming more and more complex. In addition, the amount of real-time alarm messages from the supervisory control and data acquisition, energy management systems and wide area measurement systems about switchgear and protection are also increasing to a point far beyond the operator's capacity to digest the information. Research and development of a fault diagnosis system is necessary for the timely identification of fault or malfunctioning devices and for realizing the automation functions of dynamic supervisory control system. The prevailing fault diagnosis approaches in power systems include the expert system, artificial neural network, and fault diagnosis based on optimal theory. This paper discussed the advantages and disadvantages of each of these approaches for diagnosing faults. The paper also proposed a new fault diagnosis and operational processing approach based on a cooperative expert system combined with a multi-agent architecture. For solving complex and correlative faults, the cooperative expert system can overcome the deficiency of a single expert system. It can be used not only for diagnosing complex faults in real time but also in providing timely operational advice. The proposed system has been used successfully in a district power grid in China's Shangdong province for a year. 9 refs., 4 figs.

An expert system technology for work authorization information systems

International Nuclear Information System (INIS)

Munchausen, J.H.; Glazer, K.A.

1988-01-01

This paper describes the effort by Southern California Edison Company (SCE) and the Electric Power Research Institute (EPRI) to develop an expert systems work station designed to support the San Onofre Nuclear Generating Station (SONGS). The expert systems work station utilizes IntelliCorp KEE (Knowledge Engineering Environment) and EPRI-IntelliCorp PLEXSYS (PLant EXpert SYStem) technology, and SCE Piping and Instrumentation Diagrams (P and ID's) and host-based computer applications to assist plant operations and maintenance personnel in the development of safety tagout boundaries. Of significance in this venture is the merging of conventional computer applications technology with expert systems technology. The EPRI PLEXSYS work station will act as a front-end for the SONGS Tagout Administration and Generation System (TAGS), a conventional CICS/COBOL mainframe computer application

Expert system for liquid low-level waste management

International Nuclear Information System (INIS)

Ferrada, J.J.

1992-01-01

An expert system prototype has been developed to support system analysis activities at the Oak Ridge National Laboratory (ORNL) for waste management tasks. This expert system will aid in prioritizing radioactive waste streams for treatment and disposal by evaluating the severity and treatability of the problem as well as the final waste form. The objectives of the expert system development included: (1) collecting information on process treatment technologies for liquid low-level waste (LLLW) that can be incorporated in the knowledge base of the expert system, and (2) producing a prototype that suggests processes and disposal technologies for the ORNL LLLW system. The concept under which the expert system has been designed is integration of knowledge. There are many sources of knowledge (data bases, text files, simulation programs, etc.) that an expert would regularly consult in order to solve a problem of liquid waste management. The expert would normally know how to extract the information from these different sources of knowledge. The general scope of this project would be to include as much pertinent information as possible within the boundaries of the expert system. As a result, the user, who may not be an expert in every aspect of liquid waste management, may be able to apply the content of the information to a specific waste problem. This paper gives the methodological steps to develop the expert system under this general framework

Expert system characteristics and potential applications in safeguards

International Nuclear Information System (INIS)

Chapman, L.D.

1986-01-01

The general growth of expert, knowledge-based (KB) or rule based systems will significantly increase in the next three to five years. Improvements in computer hardware (speed, reduced size, power) and software (rule based, data based, user interfaces) in recent years are providing the foundations for the growth of expert systems. A byproduct of this growth will undoubtedly be the application of expert systems to various safeguards problems. Characteristics of these expert systems will involve 1) multiple rules governing an outcome, 2) confidence factors on individual variables and rule sets, 3) priority, cost, and risk based rule sets, and 4) the reasoning behind the advice or decision given by the expert system. This paper presents characteristics, structures, and examples of simple rule based systems. Potential application areas for these expert systems may include training, operations, management, designs, evaluations, and specific hardware operation

Multipurpose expert-robot system model for control, diagnosis, maintenance, and repairs at the steam generators of the NPP

International Nuclear Information System (INIS)

Popa, I.

1994-01-01

The paper presents the model concept for a multipurpose expert-robot system for control, diagnosis, forecast, maintenance, and repairs at the steam generators of CANDU type nuclear power plants. The system has two separate parts: the expert system and the robot (manipulator) system. These parts compose a hierarchic structure with the expert system on the upper level. The expert system has a blackboard architecture, to which tree interfaces with the robot system, with the control system of the NPP and with the methods and techniques of control, maintenance and repairs system of the steam generator are added. Due to complex nature of its activities the expert-robot system model combines the deterministic type reasons with probabilistic, fuzzy, and neural-networks type ones. The information that enter the expert system comes from the robot system, from process, from user, and human expert. The information that enter robot system comes from the expert system, from the human operator (when connected) and from process. Control maintenance and repair operations take place by means of the robot system that can be monitored either directly by the expert system or by the human operator who follows its activity. All these activities are performed in parallel with the adequate information of the expert system directly, by the human operator, about the status parameters and, possibly, operating parameters of the steam generator components. The expert-robot system can work independently, but it can be connected and integrated in the control system of NPP, to take over and develop some of its functions. The activities concerning diagnosis and characterization of the state of steam generator components subsequent to control, as well as the forecast of their future behavior, are performed by means of the expert system. Due to these characteristics the expert-robot system can be used successfully in personnel training activities. (Author)

Nickel Hydrogen Battery Expert System

Science.gov (United States)

Johnson, Yvette B.; Mccall, Kurt E.

1992-01-01

The Nickel Cadmium Battery Expert System-2, or 'NICBES-2', which was used by the NASA HST six-battery testbed, was subsequently converted into the Nickel Hydrogen Battery Expert System, or 'NICHES'. Accounts are presently given of this conversion process and future uses being contemplated for NICHES. NICHES will calculate orbital summary data at the end of each orbit, and store these files for trend analyses and rules-generation.

Counseling, Artificial Intelligence, and Expert Systems.

Science.gov (United States)

Illovsky, Michael E.

1994-01-01

Considers the use of artificial intelligence and expert systems in counseling. Limitations are explored; candidates for counseling versus those for expert systems are discussed; programming considerations are reviewed; and techniques for dealing with rational, nonrational, and irrational thoughts and feelings are described. (Contains 46…

Expert-systems and computer-based industrial systems

International Nuclear Information System (INIS)

Terrien, J.F.

1987-01-01

Framatome makes wide use of expert systems, computer-assisted engineering, production management and personnel training. It has set up separate business units and subsidiaries and also participates in other companies which have the relevant expertise. Five examples of the products and services available in these are discussed. These are in the field of applied artificial intelligence and expert-systems, in integrated computer-aid design and engineering, structural analysis, computer-related products and services and document management systems. The structure of the companies involved and the work they are doing is discussed. (UK)

The plant expert system (PLEXSYS) development environment

International Nuclear Information System (INIS)

Hashemi, S.; Patterson, L.; Jeffery, M.; Delashmutt, L.

1989-06-01

The PLEXSYS software engineering tool provides an environment with which utility engineers can build and use expert systems for power plant applications. PLEXSYS provides the engineer with access to many powerful Artificial Intelligence methodologies, while retaining an engineering frame of reference and minimizing the need for a formal background in computer science. The principle concept is that the description and understanding of power plant systems centers on graphical forms such as piping and instrumentation diagrams and electrical line diagrams, which define a graphics-based model of plant knowledge that is common to many applications. PLEXSYS provides a model editor that allows the user to construct and modify models of hydraulic, electrical, and information systems in terms of elementary components and their interconnections. Analysis of the resulting schematic models is provided by several functions that perform network analysis, schematic browsing, mathematical modeling and customization of the user interface. 41 figs., 1 tab

Building reactor operator sustain expert system with C language integrated production system

International Nuclear Information System (INIS)

Ouyang Qin; Hu Shouyin; Wang Ruipian

2002-01-01

The development of the reactor operator sustain expert system is introduced, the capability of building reactor operator sustain expert system is discussed with C Language Integrated Production System (Clips), and a simple antitype of expert system is illustrated. The limitation of building reactor operator sustain expert system with Clips is also discussed

Cataloging Expert Systems: Optimism and Frustrated Reality.

Science.gov (United States)

Olmstadt, William J.

2000-01-01

Discusses artificial intelligence and attempts to catalog expert systems. Topics include the nature of expertise; examples of cataloging expert systems; barriers to implementation; and problems, including total automation, cataloging expertise, priorities, and system design. (LRW)

Industrial disasters - the expert systems solution

International Nuclear Information System (INIS)

Sachs, P.

1986-01-01

Six mistakes by the operators led to the accident at the Cherobyl nuclear reactor. These have been studied. It is suggested that an expert systems approach could prevent similar accidents. The expert system is a new approach to software programming where programs are required to perform intelligent analyses of complex situations. It separates the knowledge of a problem from the procedural code that performs the decision. An expert system will evaluate data and indicate a priority on alarms in real time. Now software systems can detect the cause of a problem in a process plant and present their findings to the operators in the control room. This should enable operators to make the correct decisions as they will know which underlying process faults are causing the alarms to operate. The Chernobyl post-mortem meeting made 13 proposals for improving safety. Two in particular are noted as relevant to expert advice systems; international collaboration on man-reactor relationships and a conference to explore the balance of automation and human action to minimise operating errors. (U.K.)

Expert systems intelligent tutoring systems and the power industry: A future scenario

International Nuclear Information System (INIS)

Bloom, C.P.; Bullemer, P.T.; Cochran, E.L.

1990-01-01

One use to which fielded expert systems have been put is the training of less experienced personnel. However, since expert systems are not developed for the purpose of training, their knowledge contains gaps, particularly in the areas of explanation and reasoning-essential components of expertise. The incidental learning that results from interacting with an expert system produces a memorization of the expert system's procedures without an understanding of the logic behind those procedures. Although learning without comprehension can provide adequate task performance, it affords inadequate transfer or generalization of knowledge, producing task-specific learning. In other words, the expert system user performs the task like an expert, but has not really become an expert. To become an expert, specialized training is required. This training could be provided by professional educators, or, in the future, by artificial intelligence programs, called intelligent tutoring systems, specifically designed for training

EPRI expert system activities for nuclear utility industry application

International Nuclear Information System (INIS)

Naser, J.A.

1990-01-01

This paper reports on expert systems which have reached a level of maturity where they offer considerable benefits for the nuclear utility industry. The ability of expert systems to enhance expertise makes them an important tool for the nuclear utility industry in the areas of engineering, operations and maintenance. Benefits of expert system applications include comprehensive and consistent reasoning, reduction of time required for activities, retention of human expertise and ability to utilize multiple experts knowledge for an activity. The Electric Power Research Institute (EPRI) has been performing four basic activities to help the nuclear industry take advantage of this expert system technology. The first is the development of expert system building tools which are tailored to nuclear utility industry applications. The second is the development of expert system applications. The third is work in developing a methodology for verification and validation of expert systems. The last is technology transfer activities to help the nuclear utility industry benefit from expert systems. The purpose of this paper is to describe the EPRI activities

Handbook of VLSI chip design and expert systems

CERN Document Server

Schwarz, A F

1993-01-01

Handbook of VLSI Chip Design and Expert Systems provides information pertinent to the fundamental aspects of expert systems, which provides a knowledge-based approach to problem solving. This book discusses the use of expert systems in every possible subtask of VLSI chip design as well as in the interrelations between the subtasks.Organized into nine chapters, this book begins with an overview of design automation, which can be identified as Computer-Aided Design of Circuits and Systems (CADCAS). This text then presents the progress in artificial intelligence, with emphasis on expert systems.

Expert Systems Research.

Science.gov (United States)

Duda, Richard O.; Shortliffe, Edward H.

1983-01-01

Discusses a class of artificial intelligence computer programs (often called "expert systems" because they address problems normally thought to require human specialists for their solution) intended to serve as consultants for decision making. Also discusses accomplishments (including information systematization in medical diagnosis and…

Expert systems to assist plant operation

International Nuclear Information System (INIS)

Matsumoto, Yoshihiro; Mori, Nobuyuki; Wada, Norio

1985-01-01

Large-scale real-time process control systems, such as those for electric power dispatching, large thermal and nuclear power stations, steel mill plants and manufacturing automation systems, need expert systems to assist operator's decision. The expert systems newly developed to fulfill the requirement are founded on OKBS (object oriented knowledge based system). OKBS provides various object types: fuzzy logic type, production rule type, frame type, state transition type, abstract data type and input/output transformation type. (author)

Use of expert systems in nuclear safety

International Nuclear Information System (INIS)

1990-02-01

One dominant aspect of improvement in safe nuclear power plant operation is the very high speed in the development and introduction of computer technologies. This development commenced recently when advanced control technology was incorporated into the nuclear industry. This led to an increasing implementation of information displays, annunciator windows and other devices inside the control room, eventually overburdening the control room operator with detailed information. Expert systems are a further step in this direction being designed to apply large knowledge bases to solve practical problems. These ''intelligent'' systems have to incorporate enough knowledge to reach expert levels of importance and represent a very advanced man-machine interface. The aims of the Technical Committee were addressed by the three Working Groups and summarized in Sections 2, 3 and 4 of this report. Section 2 summarizes the results and discussions on the current capabilities of expert systems and identifies features for the future development and use of Expert Systems in Nuclear Power Plants. Section 3 provides an overview of the discussions and investigations into the current status of Expert Systems in NPPs. This section develops a method for assessing the overall benefit of different applications and recommends a broad strategy for priority developments of Expert Systems in NPPs. Section 4 assesses the overall use of PSA type studies in Expert Systems in NPPs and identifies specific features to be adopted in the design of these systems in future applications. The conclusions of the three Working Groups are presented in Section 5. The 15 papers presented at the meeting formed the Annex of this document. A separate abstract was prepared for each of these papers. Refs, figs, tabs and pictures

A study on the applications of expert systems and neural networks for the development of operator support systems in nuclear power plants

International Nuclear Information System (INIS)

Cheon, Se Woo

1993-02-01

In order to assist operators in effectively maintaining plant safety and to enhance plant availability, the need to develop operator support systems is growing to increase. The application of both expert system and neural network technologies to the operator support has the potential to increase the performance of these systems. A prototype integrated operator support system, called NSSS-DS, has been developed for multiple alarm processing, plant trip diagnosis, and the failure diagnosis of three main systems (a rod control system, reactor coolant pumps (RCPs) and a pressurizer) in the primary side of the Kori-2 nuclear power plant. This system diagnoses system malfunction quickly and offers appropriate guidance to operators. The system uses rule-based deduction with certainty factor operation. Diagnosis is performed using an establish-refine inference strategy. This strategy is to match a set of symptoms with a specific malfunction hypothesis in a predetermined structure of possible hypotheses. The diagnostic symptoms include alarms, indication lamps, parameter values and valve lineup that can be acquired at a main control room. The overall plant-wide diagnosis is performed at the main control part which can process multiple alarms and diagnose possible failure modes and failed systems in the plant. The method of alarm processing is the object-oriented approach in which each alarm can be represented as an active data element, an object. The alarm processing is performed using alarm processing meta rules and alarm processing frames. Also, the diagnosis of a plant trip can be performed at the main control part. The specific diagnosis of the three main systems can be performed followed by the diagnostic results of the main control part. The system also provides follow-up treatments to the operators. The application to these systems is described from the point of view of diagnostic strategies. For the applications of the neural network technology, two feasibility

Rule base system in developing groundwater pollution expert system: predicting model

International Nuclear Information System (INIS)

Mongkon Ta-oun; Mohamed Daud; Mohd Zohadie Bardaie; Shamshuddin Jusop

2000-01-01

New techniques are now available for use in the protection of the environment. One of these techniques is the use of expert system for prediction groundwater pollution potential. Groundwater Pollution Expert system (GWPES) rules are a collection of principles and procedures used to know the comprehension of groundwater pollution prediction. The rules of groundwater pollution expert system in the form of questions, choice, radio-box, slide rule, button or frame are translated in to IF-THEN rule. The rules including of variables, types, domains and descriptions were used by the function of wxCLIPS (C Language Integrate Production System) expert system shell. (author)

Using Pathfinder networks to discover alignment between expert and consumer conceptual knowledge from online vaccine content.

Science.gov (United States)

Amith, Muhammad; Cunningham, Rachel; Savas, Lara S; Boom, Julie; Schvaneveldt, Roger; Tao, Cui; Cohen, Trevor

2017-10-01

This study demonstrates the use of distributed vector representations and Pathfinder Network Scaling (PFNETS) to represent online vaccine content created by health experts and by laypeople. By analyzing a target audience's conceptualization of a topic, domain experts can develop targeted interventions to improve the basic health knowledge of consumers. The underlying assumption is that the content created by different groups reflects the mental organization of their knowledge. Applying automated text analysis to this content may elucidate differences between the knowledge structures of laypeople (heath consumers) and professionals (health experts). This paper utilizes vaccine information generated by laypeople and health experts to investigate the utility of this approach. We used an established technique from cognitive psychology, Pathfinder Network Scaling to infer the structure of the associational networks between concepts learned from online content using methods of distributional semantics. In doing so, we extend the original application of PFNETS to infer knowledge structures from individual participants, to infer the prevailing knowledge structures within communities of content authors. The resulting graphs reveal opportunities for public health and vaccination education experts to improve communication and intervention efforts directed towards health consumers. Our efforts demonstrate the feasibility of using an automated procedure to examine the manifestation of conceptual models within large bodies of free text, revealing evidence of conflicting understanding of vaccine concepts among health consumers as compared with health experts. Additionally, this study provides insight into the differences between consumer and expert abstraction of domain knowledge, revealing vaccine-related knowledge gaps that suggest opportunities to improve provider-patient communication. Copyright © 2017 Elsevier Inc. All rights reserved.

Expert systems for plant operations training and assistance

International Nuclear Information System (INIS)

Pack, R.W.; Lazar, P.M.; Schmidt, R.V.; Gaddy, C.D.

1988-01-01

The project described in this paper explored the use of expert systems for plant operations training and assistance. Three computer technologies were reviewed: computer-aided instruction, expert systems, and expert training systems (ETS). The technology of CAI has been developed since the early 1960s, and a wide range of applications are available commercially today. Expert systems have been developed primarily as job performance aids, and the number of commercial applications is increasing. A fully developed ETS has models of the trainer and trainee, in addition to a knowledge base

Assessment of giant panda habitat based on integration of expert system and neural network

NARCIS (Netherlands)

Liu, X.; Skidmore, A.K.; Bronsveld, M.C.

2006-01-01

To conserve giant panda effectively, it is important to understand the spatial pattern and temporal change of its habitat. Mapping is an effective approach for wildlife habitat evaluation and monitoring. The application of recently developed artificial intelligence tools, including expert systems

A fuzzy expert system based on relations

International Nuclear Information System (INIS)

Hall, L.O.; Kandel, A.

1986-01-01

The Fuzzy Expert System (FESS) is an expert system which makes use of the theory of fuzzy relations to perform inference. Relations are very general and can be used for any application, which only requires different types of relations be implemented and used. The incorporation of fuzzy reasoning techniques enables the expert system to deal with imprecision in a well-founded manner. The knowledge is represented in relational frames. FESS may operate in either a forward chaining or backward chaining manner. It uses primarily implication and factual relations. A unique methodology for combination of evidence has been developed. It makes uses of a blackboard for communication between the various knowledge sources which may operate in parallel. The expert system has been designed in such a manner that it may be used for diverse applications

Workflow Agents vs. Expert Systems: Problem Solving Methods in Work Systems Design

Science.gov (United States)

Clancey, William J.; Sierhuis, Maarten; Seah, Chin

2009-01-01

During the 1980s, a community of artificial intelligence researchers became interested in formalizing problem solving methods as part of an effort called "second generation expert systems" (2nd GES). How do the motivations and results of this research relate to building tools for the workplace today? We provide an historical review of how the theory of expertise has developed, a progress report on a tool for designing and implementing model-based automation (Brahms), and a concrete example how we apply 2nd GES concepts today in an agent-based system for space flight operations (OCAMS). Brahms incorporates an ontology for modeling work practices, what people are doing in the course of a day, characterized as "activities." OCAMS was developed using a simulation-to-implementation methodology, in which a prototype tool was embedded in a simulation of future work practices. OCAMS uses model-based methods to interactively plan its actions and keep track of the work to be done. The problem solving methods of practice are interactive, employing reasoning for and through action in the real world. Analogously, it is as if a medical expert system were charged not just with interpreting culture results, but actually interacting with a patient. Our perspective shifts from building a "problem solving" (expert) system to building an actor in the world. The reusable components in work system designs include entire "problem solvers" (e.g., a planning subsystem), interoperability frameworks, and workflow agents that use and revise models dynamically in a network of people and tools. Consequently, the research focus shifts so "problem solving methods" include ways of knowing that models do not fit the world, and ways of interacting with other agents and people to gain or verify information and (ultimately) adapt rules and procedures to resolve problematic situations.

The Management and Security Expert (MASE)

Science.gov (United States)

Miller, Mark D.; Barr, Stanley J.; Gryphon, Coranth D.; Keegan, Jeff; Kniker, Catherine A.; Krolak, Patrick D.

1991-01-01

The Management and Security Expert (MASE) is a distributed expert system that monitors the operating systems and applications of a network. It is capable of gleaning the information provided by the different operating systems in order to optimize hardware and software performance; recognize potential hardware and/or software failure, and either repair the problem before it becomes an emergency, or notify the systems manager of the problem; and monitor applications and known security holes for indications of an intruder or virus. MASE can eradicate much of the guess work of system management.

Expert Systems: A Challenge for the Reading Profession.

Science.gov (United States)

Balajthy, Ernest

The expert systems are designed to imitate the reasoning of a human expert in a content area field. Designed to be advisors, these software systems combine the content area knowledge and decision-making ability of an expert with the user's understanding and knowledge of particular circumstances. The reading diagnosis system, the RD2P System…

Experts Networks and the European Commission on Demographic Change

DEFF Research Database (Denmark)

Seabrooke, Leonard; Tsingou, Eleni; Willers, Johann Ole

experts on demographic change. Our findings suggest that on demographic change issues at the EU level, DG EMPL has taken the lead, while DG ECFIN is the secondary actor. Still, internal European Commission dynamics mean that the lead actor on demographic issues has less autonomy in articulating a funded......This paper examines who populates the expert and policy network around demographic change issues in Europe. We examine how competing policy departments in the European Commission Directorates-General (DGs) deal with the issue of Europe’s changing demography, as well as discuss the role of external...... and clear policy position on how to address them. As a consequence, there is little institutional memory and hardly a depository of activity on demographic change. While outside expertise comes primarily from demographers, and other scholars concerned with demographic change, they are primarily an academic...

Expert system to control a fusion energy experiment

Energy Technology Data Exchange (ETDEWEB)

Johnson, R.R.; Canales, T.; Lager, D.

1986-01-01

This paper describes a system that automates neutral beam source conditioning. The system achieves this with artificial intelligence techniques by encoding the behavior of several experts as a set of if-then rules in an expert system. One of the functions of the expert system is to control an adaptive controller that, in turn, controls the neutral beam source. The architecture of the system is presented followed by a description of its performance.

Expert system to control a fusion energy experiment

International Nuclear Information System (INIS)

Johnson, R.R.; Canales, T.; Lager, D.

1986-01-01

This paper describes a system that automates neutral beam source conditioning. The system achieves this with artificial intelligence techniques by encoding the behavior of several experts as a set of if-then rules in an expert system. One of the functions of the expert system is to control an adaptive controller that, in turn, controls the neutral beam source. The architecture of the system is presented followed by a description of its performance

SeTES, a Self-Teaching Expert System for the analysis, design and prediction of gas production from shales and a prototype for a new generation of Expert Systems in the Earth Sciences

Science.gov (United States)

Kuzma, H. A.; Boyle, K.; Pullman, S.; Reagan, M. T.; Moridis, G. J.; Blasingame, T. A.; Rector, J. W.; Nikolaou, M.

2010-12-01

A Self Teaching Expert System (SeTES) is being developed for the analysis, design and prediction of gas production from shales. An Expert System is a computer program designed to answer questions or clarify uncertainties that its designers did not necessarily envision which would otherwise have to be addressed by consultation with one or more human experts. Modern developments in computer learning, data mining, database management, web integration and cheap computing power are bringing the promise of expert systems to fruition. SeTES is a partial successor to Prospector, a system to aid in the identification and evaluation of mineral deposits developed by Stanford University and the USGS in the late 1970s, and one of the most famous early expert systems. Instead of the text dialogue used in early systems, the web user interface of SeTES helps a non-expert user to articulate, clarify and reason about a problem by navigating through a series of interactive wizards. The wizards identify potential solutions to queries by retrieving and combining together relevant records from a database. Inferences, decisions and predictions are made from incomplete and noisy inputs using a series of probabilistic models (Bayesian Networks) which incorporate records from the database, physical laws and empirical knowledge in the form of prior probability distributions. The database is mainly populated with empirical measurements, however an automatic algorithm supplements sparse data with synthetic data obtained through physical modeling. This constitutes the mechanism for how SeTES self-teaches. SeTES’ predictive power is expected to grow as users contribute more data into the system. Samples are appropriately weighted to favor high quality empirical data over low quality or synthetic data. Finally, a set of data visualization tools digests the output measurements into graphical outputs.

Expert systems for assisting in design reviews

International Nuclear Information System (INIS)

Brtis, J.S.; Johnson, W.J.; Weber, N.; Naser, J.

1990-01-01

This paper discusses Sargent and Lundy's (S and L's) use of expert system technologies to computerize the procedures used for engineering design reviews. This paper discusses expert systems and the advantages that result from using them to computerize the decision-making process. This paper also discusses the design review expert systems that S and L has developed to perform fire protection and ALARA (as low as reasonably achievable) design reviews, and is currently developing for the Electric Power Research Institute (EPRI) to perform 10 CFR 50.59 safety reviews

An expert system for dispersion model interpretation

International Nuclear Information System (INIS)

Skyllingstad, E.D.; Ramsdell, J.V.

1988-10-01

A prototype expert system designed to diagnose dispersion model uncertainty is described in this paper with application to a puff transport model. The system obtains qualitative information from the model user and through an expert-derived knowledge base, performs a rating of the current simulation. These results can then be used in combination with dispersion model output for deciding appropriate evacuation measures. Ultimately, the goal of this work is to develop an expert system that may be operated accurately by an individual uneducated in meteorology or dispersion modeling. 5 refs., 3 figs

An hierarchical approach to performance evaluation of expert systems

Science.gov (United States)

Dominick, Wayne D. (Editor); Kavi, Srinu

1985-01-01

The number and size of expert systems is growing rapidly. Formal evaluation of these systems - which is not performed for many systems - increases the acceptability by the user community and hence their success. Hierarchical evaluation that had been conducted for computer systems is applied for expert system performance evaluation. Expert systems are also evaluated by treating them as software systems (or programs). This paper reports many of the basic concepts and ideas in the Performance Evaluation of Expert Systems Study being conducted at the University of Southwestern Louisiana.

Expert system for accelerator single-freedom nonlinear components

International Nuclear Information System (INIS)

Wang Sheng; Xie Xi; Liu Chunliang

1995-01-01

An expert system by Arity Prolog is developed for accelerator single-freedom nonlinear components. It automatically yields any order approximate analytical solutions for various accelerator single-freedom nonlinear components. As an example, the eighth order approximate analytical solution is derived by this expert system for a general accelerator single-freedom nonlinear component, showing that the design of the expert system is successful

Toward the Development of Expert Assessment Systems.

Science.gov (United States)

Hasselbring, Ted S.

1986-01-01

The potential application of "expert systems" to the diagnosis and assessment of special-needs children is examined and existing prototype systems are reviewed. The future of this artificial intelligence technology is discussed in relation to emerging development tools designed for the creation of expert systems by the lay public. (Author)

Expert systems for real-time monitoring and fault diagnosis

Science.gov (United States)

Edwards, S. J.; Caglayan, A. K.

1989-01-01

Methods for building real-time onboard expert systems were investigated, and the use of expert systems technology was demonstrated in improving the performance of current real-time onboard monitoring and fault diagnosis applications. The potential applications of the proposed research include an expert system environment allowing the integration of expert systems into conventional time-critical application solutions, a grammar for describing the discrete event behavior of monitoring and fault diagnosis systems, and their applications to new real-time hardware fault diagnosis and monitoring systems for aircraft.

GOTRES: an expert system for fault detection and analysis

International Nuclear Information System (INIS)

Chung, D.T.; Modarres, M.

1989-01-01

This paper describes a deep-knowledge expert system shell for diagnosing faults in process operations. The expert program shell is called GOTRES (GOal TRee Expert System) and uses a goal tree-success tree deep-knowledge structure to model its knowledge-base. To demonstrate GOTRES, we have built an on-line fault diagnosis expert system for an experimental nuclear reactor facility using this shell. The expert system is capable of diagnosing fault conditions using system goal tree as well as utilizing accumulated operating knowledge to predict plant causal and temporal behaviours. The GOTRES shell has also been used for root-cause detection and analysis in a nuclear plant. (author)

Advisory expert system for test rig operator

International Nuclear Information System (INIS)

Zielczynski, P.

1994-01-01

The advisory expert system MAESTRO (Modular Advisory Expert System for Test Rig Operator) has been designed to guide the operator of large experimental installation during start-up, steady state and shut down. The installation is located in the research reactor MARIA in the Institute of Atomic Energy in Swierk, Poland. The system acquires and analyses on line signals from installation and performs two tasks in real time: leading the operator and monitoring of the installation (including signal validation). Systems tasks, architecture and knowledge representation concepts are described. The system is based on expert systems techniques what makes in phases of continuous change of process parameters and it has been achieved by special knowledge representation allowing its dynamical modification. (author). 147 refs, 42 figs, 5 tab

An expert system approach for safety diagnosis

International Nuclear Information System (INIS)

Erdmann, R.C.; Sun, B.K.H.

1988-01-01

An expert system was developed with the intent to provide real-time information about an accident to an operator who is in the process of diagnosing and bringing that accident under control. Explicit use was made of probabilistic risk analysis techniques and plant accident response information in constructing this system. The expert system developed contains 70 logic rules and provides contextual messages during simulated accident sequences and logic sequence information on the entire sequence in graphical form for accident diagnosis. The present analysis focuses on integrated control system-related transients with Babcock and Wilcox-type reactors. While the system developed here is limited in extent and was built for a composite reactor, it demonstrates that an expert system may enhance the operator's capability in the control room

Expert system for transuranic waste assay

Energy Technology Data Exchange (ETDEWEB)

Zoolalian, M.L.; Gibbs, A.; Kuhns, J.D.

1989-01-01

Transuranic wastes are generated at the Savannah River Site (SRS) as a result of routine production of nuclear materials. These wastes contain Pu-238 and Pu-239 and are placed into lined 55-gallon waste drums. The drums are placed on monitored storage pads pending shipment to the Waste Isolation Pilot Plant in New Mexico. A passive-active neutron (PAN) assay system is used to determine the mass of the radioactive material within the waste drums. Assay results are used to classify the wastes as either low-level or transuranic (TRU). During assays, the PAN assay system communicates with an IBM-AT computer. A Fortran computer program, called NEUT, controls and performs all data analyses. Unassisted, the NEUT program cannot adequately interpret assay results. To eliminate this limitation, an expert system shell was used to write a new algorithm, called the Transuranic Expert System (TRUX), to drive the NEUT program and add decision making capabilities for analysis of the assay results. The TRUX knowledge base was formulated by consulting with human experts in the field of neutron assay, by direct experimentation on the PAN assay system, and by observing operations on a daily basis. TRUX, with its improved ability to interpret assay results, has eliminated the need for close supervision by a human expert, allowing skilled technicians to operate the PAN assay system. 4 refs., 1 fig., 4 tabs.

Expert system for transuranic waste assay

International Nuclear Information System (INIS)

Zoolalian, M.L.; Gibbs, A.; Kuhns, J.D.

1989-01-01

Transuranic wastes are generated at the Savannah River Site (SRS) as a result of routine production of nuclear materials. These wastes contain Pu-238 and Pu-239 and are placed into lined 55-gallon waste drums. The drums are placed on monitored storage pads pending shipment to the Waste Isolation Pilot Plant in New Mexico. A passive-active neutron (PAN) assay system is used to determine the mass of the radioactive material within the waste drums. Assay results are used to classify the wastes as either low-level or transuranic (TRU). During assays, the PAN assay system communicates with an IBM-AT computer. A Fortran computer program, called NEUT, controls and performs all data analyses. Unassisted, the NEUT program cannot adequately interpret assay results. To eliminate this limitation, an expert system shell was used to write a new algorithm, called the Transuranic Expert System (TRUX), to drive the NEUT program and add decision making capabilities for analysis of the assay results. The TRUX knowledge base was formulated by consulting with human experts in the field of neutron assay, by direct experimentation on the PAN assay system, and by observing operations on a daily basis. TRUX, with its improved ability to interpret assay results, has eliminated the need for close supervision by a human expert, allowing skilled technicians to operate the PAN assay system. 4 refs., 1 fig., 4 tabs

PERSON-Personalized Expert Recommendation System for Optimized Nutrition.

Science.gov (United States)

Chen, Chih-Han; Karvela, Maria; Sohbati, Mohammadreza; Shinawatra, Thaksin; Toumazou, Christofer

2018-02-01

The rise of personalized diets is due to the emergence of nutrigenetics and genetic tests services. However, the recommendation system is far from mature to provide personalized food suggestion to consumers for daily usage. The main barrier of connecting genetic information to personalized diets is the complexity of data and the scalability of the applied systems. Aiming to cross such barriers and provide direct applications, a personalized expert recommendation system for optimized nutrition is introduced in this paper, which performs direct to consumer personalized grocery product filtering and recommendation. Deep learning neural network model is applied to achieve automatic product categorization. The ability of scaling with unknown new data is achieved through the generalized representation of word embedding. Furthermore, the categorized products are filtered with a model based on individual genetic data with associated phenotypic information and a case study with databases from three different sources is carried out to confirm the system.

Expert system application for prioritizing preventive actions for shift work: shift expert.

Science.gov (United States)

Esen, Hatice; Hatipoğlu, Tuğçen; Cihan, Ahmet; Fiğlali, Nilgün

2017-09-19

Shift patterns, work hours, work arrangements and worker motivations have increasingly become key factors for job performance. The main objective of this article is to design an expert system that identifies the negative effects of shift work and prioritizes mitigation efforts according to their importance in preventing these negative effects. The proposed expert system will be referred to as the shift expert. A thorough literature review is conducted to determine the effects of shift work on workers. Our work indicates that shift work is linked to demographic variables, sleepiness and fatigue, health and well-being, and social and domestic conditions. These parameters constitute the sections of a questionnaire designed to focus on 26 important issues related to shift work. The shift expert is then constructed to provide prevention advice at the individual and organizational levels, and it prioritizes this advice using a fuzzy analytic hierarchy process model, which considers comparison matrices provided by users during the prioritization process. An empirical study of 61 workers working on three rotating shifts is performed. After administering the questionnaires, the collected data are analyzed statistically, and then the shift expert produces individual and organizational recommendations for these workers.

A computerized expert system for mammography

International Nuclear Information System (INIS)

Jackson, V.P.; Dines, K.A.; Bassett, L.W.

1988-01-01

The authors have developed a computer-based expert system to aid in the interpretation of mammograms, breast sonograms, and clinical findings. The radiologist enters clinical and image data into the artificial intelligence system and receives a prediction of the etiology of lesions seen on breast imaging studies. This prototype interactive system has undergone preliminary clinical testing and evaluation. Ultimately, a more refined and complex system will be of value in mammography education, for general radiologists without ready access to mammography experts, for paramedical personnel, and for all mammographers in need of a breast imaging database and reporting systems

Probabilistic safety assessment based expert systems in support of dynamic risk assessment

International Nuclear Information System (INIS)

Varde, P.V.; Sharma, U.L.; Marik, S.K.; Raina, V.K.; Tikku, A.C.

2006-01-01

Probabilistic Safety Assessment (PSA) studies are being performed, world over as part of integrated risk assessment for Nuclear Power Plants and in many cases PSA insight is utilized in support of decision making. Though the modern plants are built with inherent safety provisions, particularly to reduce the supervisory requirements during initial period into the accident, it is always desired to develop an efficient user friendly real-time operator advisory system for handling of plant transients/emergencies which would be of immense benefit for the enhancement of operational safety of the plant. This paper discusses an integrated approach for the development of operator support system. In this approach, PSA methodology and the insight obtained from PSA has been utilized for development of knowledge based or rule based experts system. While Artificial Neural Network (ANN) approach has been employed for transient identification, rule-base expert system shell environment was used for the development of diagnostic module in this system. Attempt has been made to demonstrate that this approach offers an efficient framework for addressing requirements related to handling of real-time/dynamic scenario. (author)

Human engineering in the design of expert systems for microcomputer system troubleshooting

International Nuclear Information System (INIS)

Easter, J.R.; Elm, W.C.

1988-01-01

The man-machine interfaces of the first generation of expert systems have usually received little or no explicit design effort. As a result, many of these systems when placed in their productive environment have only served to collect dust. One of the more aggravating attributes of such systems has been the demand that the user of such systems religiously follow the pre-determined and fixed problem solving path the domain expert designed in the expert system. Westinghouse has embarked on a program aimed at improving the productivity of the I and C maintenance staff responsible for caring for these new systems, the focus of which is the development of a computer based expert system to be used as a trouble-shooting aid. To date, Westinghouse has created a knowledge structure for such an expert system that describes the purposes or design objectives of the faulted microcomputer system

Cornell Mixing Zone Expert System

Science.gov (United States)

This page provides an overview Cornell Mixing Zone Expert System water quality modeling and decision support system designed for environmental impact assessment of mixing zones resulting from wastewater discharge from point sources

Expert system based radionuclide identification

International Nuclear Information System (INIS)

Aarnio, P.A.; Ala-Heikkil, J.J.; Hakulinen, T.T.; Nikkinen, M.T.

1998-01-01

An expert system coupled with the gamma spectrum analysis system SAMPO has been developed for automating the qualitative identification of radionuclides as well as for determining the quantitative parameters of the spectrum components. The program is written in C-language and runs in various environments ranging from PCs to UNIX workstations. The expert system utilizes a complete gamma library with over 2600 nuclides and 80,000 lines, and a rule base of about fifty criteria including energies, relative peak intensities, genesis modes, half lives, parent-daughter relationships, etc. The rule base is furthermore extensible by the user. This is not an original contribution but a somewhat updated version of papers and reports previously published elsewhere. (author)

Jess, the Java expert system shell

Energy Technology Data Exchange (ETDEWEB)

Friedman-Hill, E.J.

1997-11-01

This report describes Jess, a clone of the popular CLIPS expert system shell written entirely in Java. Jess supports the development of rule-based expert systems which can be tightly coupled to code written in the powerful, portable Java language. The syntax of the Jess language is discussed, and a comprehensive list of supported functions is presented. A guide to extending Jess by writing Java code is also included.

WINE ADVISOR EXPERT SYSTEM USING DECISION RULES

Directory of Open Access Journals (Sweden)

Dinuca Elena Claudia

2013-07-01

Full Text Available In this article I focus on developing an expert system for advising the choice of wine that best matches a specific occasion. An expert system is a computer application that performs a task that would be performed by a human expert. The implementation is done using Delphi programming language. I used to represent the knowledge bases a set of rules. The rules are of type IF THEN ELSE rules, decision rules based on different important wine features.

Cooperating expert systems for space station power distribution management

International Nuclear Information System (INIS)

Nguyen, T.A.; Chiou, W.C.

1986-01-01

In a complex system such as the manned Space Station, it is deemed necessary that many expert systems must perform tasks in a concurrent and cooperative manner. An important question to arise is: what cooperative-task-performing models are appropriate for multiple expert systems to jointly perform tasks. The solution to this question will provide a crucial automation design criteria for the Space Station complex systems architecture. Based on a client/server model for performing tasks, the authors have developed a system that acts as a front-end to support loosely-coupled communications between expert systems running on multiple Symbolics machines. As an example, they use the two ART*-based expert systems to demonstrate the concept of parallel symbolic manipulation for power distribution management and dynamic load planner/scheduler in the simulated Space Station environment. This on-going work will also explore other cooperative-task-performing models as alternatives which can evaluate inter and intra expert system communication mechanisms. It will serve as a testbed and a bench-marking tool for other Space Station expert subsystem communication and information exchange

Cooperating Expert Systems For Space Station Power Distribution Management

Science.gov (United States)

Nguyen, T. A.; Chiou, W. C.

1987-02-01

In a complex system such as the manned Space Station, it is deem necessary that many expert systems must perform tasks in a concurrent and cooperative manner. An important question arise is: what cooperative-task-performing models are appropriate for multiple expert systems to jointly perform tasks. The solution to this question will provide a crucial automation design criteria for the Space Station complex systems architecture. Based on a client/server model for performing tasks, we have developed a system that acts as a front-end to support loosely-coupled communications between expert systems running on multiple Symbolics machines. As an example, we use two ART*-based expert systems to demonstrate the concept of parallel symbolic manipulation for power distribution management and dynamic load planner/scheduler in the simulated Space Station environment. This on-going work will also explore other cooperative-task-performing models as alternatives which can evaluate inter and intra expert system communication mechanisms. It will be served as a testbed and a bench-marking tool for other Space Station expert subsystem communication and information exchange.

The microcomputer-based expert system in CAD-PV

International Nuclear Information System (INIS)

Wang, Y.; Qin, S.

1987-01-01

As a branch of artificial intelligence, expert system has been revealed day after day in more and more engineering scopes since the successful applications of MYCIN in diagnosis and DENDRAL in the molecular structure of organic compounds etc.. But in the design scope of pressure vessel, as we know, only a few papers have so far been published with respect to the expert system. The necessity and feasibility of accompanying CAD-PV with expert system attracted more scholars to engage in. Although many countries, including China, have regularized the design standards or codes for pressure vessel, but of which no one can solve all of the problems concerning the various practical occasions and experiences. In general, the more domain knowledges a design engineer possesses of, the better decision will be made by him. By virtue of the expert system any less experienced engineer could make the optimum decision in design as well as a skilled senior engineer in addition to the application of design code. It is the due significance for developing high level expert system as an intelligence assistant in the plan option of CAD-PV. In this paper we attempt to introduce a specified software JACKPV used in the design procedure of jacketed pressure vessel as an intelligence front in CAD-PV. JACKPV consists of the function of expert system based on the personal computer IBM-PC/XT with the language PASCAL in its program. It was proved that an ordinary CAD software could be effectively improved while equipped with expert system. (orig.)

An examination of expert systems activities within the nuclear industry

International Nuclear Information System (INIS)

Bernard, J.A.; Washio, Takashi.

1988-01-01

This paper provides an overview of a detailed evaluation that the authors recently completed on expert systems applications within the nuclear industry. That evaluation examined the motivation for utilizing expert systems, identified the areas to which they were being applied, and provided an assessment of their utility. Listed here are some of the salient findings of that report. (1) Utilities are developing their own artificial intelligence tools rather than using commercial products. (2) Few expert systems are being developed for the express purpose of capturing human expertise. (3) A number of successful expert systems have been developed to assist in plant design, management, and maintenance scheduling. (4) Interactive diagnostic systems are being developed for the analysis of physical processes that vary slowly. (5) Real-time diagnostic expert systems are currently at the cutting edge of the technology. (6) Operator adviser and emergency response expert systems constitute ∼25% of the total. (7) Research on the use of expert systems for reactor control is quite active. (8) Too few quantitative evaluations of the benefits of expert systems to reactor operators have been performed. The operator's need is for timely, factual information on plant status. Hence, the true challenge to expert systems is real-time diagnostics

Expert system aided operator's mental activities training

International Nuclear Information System (INIS)

Gieci, A.; Macko, J.; Mosny, J.; Gese, A.

1994-01-01

The operator's mental activity is the most important part of his work. A processing of a large amount of the information by the operator is possible only if he/she possesses appropriate cognitive skills. To facilitate the novice's acquisition of the experienced operator's cognitive skills of the decision-making process a special type of the expert system was developed. The cognitive engineering's models and problem-solving methodology constitutes the basis of this expert system. The article gives an account of the prototype of the mentioned expert system developed to aid the whole mental activity of the nuclear power plant operator during his decision-making process. (author). 6 refs, 6 figs

WWER expert system for fuel failure analysis using the RTOP-CA code

International Nuclear Information System (INIS)

Likhanskii, V.; Evdokimov, I.; Sorokin, A.; Khromov, A.; Kanukova, V.; Apollonova, O.; Ugryumov, A.

2008-01-01

The computer expert system for fuel failure analysis of WWER during operation is presented. The diagnostics is based on the measurement of specific activity of reference nuclides in reactor primary coolant and application of a computer code for the data interpretation. The data analysis includes an evaluation of tramp uranium mass in reactor core, detection of failures by iodine and caesium spikes, evaluation of burnup of defective fuel. Evaluation of defective fuel burnup was carried out by applying the relation of caesium nuclides activity in spikes and relations of activities of gaseous fission products for steady state operational conditions. The method of burnup evaluation of defective fuel by use of fission gas activity is presented in details. The neural-network analysis is performed for determination of failed fuel rod number and defect size. Results of the expert system application are illustrated for several fuel campaigns on operating WWER NPPs. (authors)

Expert System for ASIC Imaging

Science.gov (United States)

Gupta, Shri N.; Arshak, Khalil I.; McDonnell, Pearse; Boyce, Conor; Duggan, Andrew

1989-07-01

With the developments in the techniques of artificial intelligence over the last few years, development of advisory, scheduling and similar class of problems has become very convenient using tools such as PROLOG. In this paper an expert system has been described which helps lithographers and process engineers in several ways. The methodology used is to model each work station according to its input, output and control parameters, combine these work stations in a logical sequence based on past experience and work out process schedule for a job. In addition, all the requirements vis-a-vis a particular job parameters are converted into decision rules. One example is the exposure time, develop time for a wafer with different feature sizes would be different. This expert system has been written in Turbo Prolog. By building up a large number of rules, one can tune the program to any facility and use it for as diverse applications as advisory help, trouble shooting etc. Leitner (1) has described an advisory expert system that is being used at National Semiconductor. This system is quite different from the one being reported in the present paper. The approach is quite different for one. There is stress on job flow and process for another.

The Study of Expert System Utilization for the Accelerator Operation

International Nuclear Information System (INIS)

Budi-Santosa; Slamet-Santosa; Subari-Santosa

2000-01-01

The utilization of expert system in the accelerator laboratory has been studied. The study covers the utilization of expert system in the setting up experiment (tuning parameter), controlling system, safety or warning system. The results study shows, that using the expert system in the accelerator would be easy to operate the accelerator for user and operator. Increasing the skill of expert system could be updated without logical mechanism modification. (author)

Expert system for web based collaborative CAE

Science.gov (United States)

Hou, Liang; Lin, Zusheng

2006-11-01

An expert system for web based collaborative CAE was developed based on knowledge engineering, relational database and commercial FEA (Finite element analysis) software. The architecture of the system was illustrated. In this system, the experts' experiences, theories and typical examples and other related knowledge, which will be used in the stage of pre-process in FEA, were categorized into analysis process and object knowledge. Then, the integrated knowledge model based on object-oriented method and rule based method was described. The integrated reasoning process based on CBR (case based reasoning) and rule based reasoning was presented. Finally, the analysis process of this expert system in web based CAE application was illustrated, and an analysis example of a machine tool's column was illustrated to prove the validity of the system.

Parameterizing Bayesian network Representations of Social-Behavioral Models by Expert Elicitation

Energy Technology Data Exchange (ETDEWEB)

Walsh, Stephen J.; Dalton, Angela C.; Whitney, Paul D.; White, Amanda M.

2010-05-23

Bayesian networks provide a general framework with which to model many natural phenomena. The mathematical nature of Bayesian networks enables a plethora of model validation and calibration techniques: e.g parameter estimation, goodness of fit tests, and diagnostic checking of the model assumptions. However, they are not free of shortcomings. Parameter estimation from relevant extant data is a common approach to calibrating the model parameters. In practice it is not uncommon to find oneself lacking adequate data to reliably estimate all model parameters. In this paper we present the early development of a novel application of conjoint analysis as a method for eliciting and modeling expert opinions and using the results in a methodology for calibrating the parameters of a Bayesian network.

Expert Systems: An Introduction -46 ...

Indian Academy of Sciences (India)

Research Scientist in the. Knowledge Based. Computer Systems Group at NeST. He is one of the ... Expert systems encode human expertise in limited domains ... answers questions the user has and provides an explanation of its reasoning.

Expert Systems as a Mindtool To Facilitate Mental Model Learning.

Science.gov (United States)

Mason-Mason, Susan Dale; Tessmer, Martin A.

2000-01-01

This exploratory study investigated whether the process of constructing an expert system model promotes the formation of expert-like mental models. Discusses expert systems as mindtools, expert systems as learning tools, the assessment of mental models, results of pretests and posttests, and future research. (Contains 56 references.) (Author/LRW)

SIDES - Segment Interconnect Diagnostic Expert System

International Nuclear Information System (INIS)

Booth, A.W.; Forster, R.; Gustafsson, L.; Ho, N.

1989-01-01

It is well known that the FASTBUS Segment Interconnect (SI) provides a communication path between two otherwise independent, asynchronous bus segments. The SI is probably the most important module in any FASTBUS data acquisition network since it's failure to function can cause whole segments of the network to be inaccessible and sometimes inoperable. This paper describes SIDES, an intelligent program designed to diagnose SI's both in situ as they operate in a data acquisition network, and in the laboratory in an acceptance/repair environment. The paper discusses important issues such as knowledge acquisition; extracting knowledge from human experts and other knowledge sources. SIDES can benefit high energy physics experiments, where SI problems can be diagnosed and solved more quickly. Equipment pool technicians can also benefit from SIDES, first by decreasing the number of SI's erroneously turned in for repair, and secondly as SIDES acts as an intelligent assistant to the technician in the diagnosis and repair process

Criteria for the CAREM reactor's expert system design conduction

International Nuclear Information System (INIS)

Furman, A.; Delgado, R.

1990-01-01

The present work describes the analysis made to start with the development of an Expert System for the CAREM (SE) reactor's conduction. The following tasks are presented: a) purpose of the Expert System; b) Decision Making structure; c) Architecture of the Expert System; d) Description of Subsystems and e) Licensing. (Author) [es

Using Expert Systems in Evaluation of the State of High Voltage Machine Insulation Systems

Directory of Open Access Journals (Sweden)

K. Záliš

2000-01-01

Full Text Available Expert systems are used for evaluating the actual state and future behavior of insulating systems of high voltage electrical machines and equipment. Several rule-based expert systems have been developed in cooperation with top diagnostic workplaces in the Czech Republic for this purpose. The IZOLEX expert system evaluates diagnostic measurement data from commonly used offline diagnostic methods for the diagnostic of high voltage insulation of rotating machines, non-rotating machines and insulating oils. The CVEX expert system evaluates the discharge activity on high voltage electrical machines and equipment by means of an off-line measurement. The CVEXON expert system is for evaluating the discharge activity by on-line measurement, and the ALTONEX expert system is the expert system for on-line monitoring of rotating machines. These developed expert systems are also used for educating students (in bachelor, master and post-graduate studies and in courses which are organized for practicing engineers and technicians and for specialists in the electrical power engineering branch. A complex project has recently been set up to evaluate the measurement of partial discharges. Two parallel expert systems for evaluating partial dischatge activity on high voltage electrical machines will work at the same time in this complex evaluating system.

A demonstration of expert systems applications in transportation engineering : volume III, evaluation of the prototype expert system TRANZ.

Science.gov (United States)

1990-01-01

The validation and evaluation of an expert system for traffic control in highway work zones (TRANZ) is described. The stages in the evaluation process consisted of the following: revisit the experts, selectively distribute copies of TRANZ with docume...

EXPERT SYSTEMS - DEVELOPMENT OF AGRICULTURAL INSURANCE TOOL

Directory of Open Access Journals (Sweden)

NAN Anca-Petruţa

2013-07-01

Full Text Available Because of the fact that specialty agricultural assistance is not always available when the farmers need it, we identified expert systems as a strong instrument with an extended potential in agriculture. This started to grow in scale recently, including all socially-economic activity fields, having the role of collecting data regarding different aspects from human experts with the purpose of assisting the user in the necessary steps for solving problems, at the performance level of the expert, making his acquired knowledge and experience available. We opted for a general presentation of the expert systems as well as their necessity, because, the solution to develop the agricultural system can come from artificial intelligence by implementing the expert systems in the field of agricultural insurance, promoting existing insurance products, farmers finding options in depending on their necessities and possibilities. The objective of this article consists of collecting data about different aspects about specific areas of interest of agricultural insurance, preparing the database, a conceptual presentation of a pilot version which will become constantly richer depending on the answers received from agricultural producers, with the clearest exposure of knowledgebase possible. We can justify picking this theme with the fact that even while agricultural insurance plays a very important role in agricultural development, the registered result got from them are modest, reason why solutions need to be found in the scope of developing the agricultural sector. The importance of this consists in the proposal of an immediate viable solution to correspond with the current necessities of agricultural producers and in the proposal of an innovative solution, namely the implementation of expert system in agricultural insurance as a way of promoting insurance products. Our research, even though it treats the subject at an conceptual level, it wants to undertake an

An Embedded Rule-Based Diagnostic Expert System in Ada

Science.gov (United States)

Jones, Robert E.; Liberman, Eugene M.

1992-01-01

Ada is becoming an increasingly popular programming language for large Government-funded software projects. Ada with it portability, transportability, and maintainability lends itself well to today's complex programming environment. In addition, expert systems have also assumed a growing role in providing human-like reasoning capability expertise for computer systems. The integration is discussed of expert system technology with Ada programming language, especially a rule-based expert system using an ART-Ada (Automated Reasoning Tool for Ada) system shell. NASA Lewis was chosen as a beta test site for ART-Ada. The test was conducted by implementing the existing Autonomous Power EXpert System (APEX), a Lisp-based power expert system, in ART-Ada. Three components, the rule-based expert systems, a graphics user interface, and communications software make up SMART-Ada (Systems fault Management with ART-Ada). The rules were written in the ART-Ada development environment and converted to Ada source code. The graphics interface was developed with the Transportable Application Environment (TAE) Plus, which generates Ada source code to control graphics images. SMART-Ada communicates with a remote host to obtain either simulated or real data. The Ada source code generated with ART-Ada, TAE Plus, and communications code was incorporated into an Ada expert system that reads the data from a power distribution test bed, applies the rule to determine a fault, if one exists, and graphically displays it on the screen. The main objective, to conduct a beta test on the ART-Ada rule-based expert system shell, was achieved. The system is operational. New Ada tools will assist in future successful projects. ART-Ada is one such tool and is a viable alternative to the straight Ada code when an application requires a rule-based or knowledge-based approach.

Expert System Techniques and Applications in AEC-Design

DEFF Research Database (Denmark)

Andersen, Tom

This part of a book presents expert system techniques applicable to building design and construction, and it reports and evaluates on systems developed in thar domain.......This part of a book presents expert system techniques applicable to building design and construction, and it reports and evaluates on systems developed in thar domain....

REXS : A financial risk diagnostic expert system

Directory of Open Access Journals (Sweden)

W. Richter

2012-01-01

Full Text Available

ENGLISH ABSTRACT: Artificial intelligence techniques are rapidly emerging as important contributors to more effective management. One of the greatest growth areas probably lies in the use of Expert System methodology for supporting managerial decision processes.
Existing Decision Support Systems often attempt to apply analytical techniques in combination with traditional data access and retrieval functions. One of the problems usually encountered while developing such decision support systems is the need to transform an unstructured problem environment into a structured analytical model. Using an expert system approach to strategic decision making in such unstructured problem environments may provide significant advantages.
The financial Risk diagnostic EXpert System (REXS concentrates on Financial Risk Analysis. Based on a Forecasting Model the system will, with the support of several expert system knowledge bases, attempt to evaluate the financial risk of a business and provide guidelines for improvement.

AFRIKAANSE OPSOMMING: Tegnieke gebaseer op Kunsmatige Intelligensie toon tans die belofte om belangrike bydraes te maak tot meerBestaande Besluitsteunstelsels poog dikwels om analitiese tegnieke en lradisionele datatoegang- en onttrekkingsfunksies te kombineer. Een van die probleme wat gewoonlik ondervind word gedurende die ontwikkeling van '0 besluitsteunstelsel bestaan uit die behoefte om 'n ongestruktueerde probleemomgewing te transformeer na 'n gestruktueerde analitiese model. 'n Ekspertstelselbenadering lot strategiese besluitneming in 'n ongeSlruktureerde probleemomgewing mag betekenisvolle voordele inhou.
Die "financial Risk diagnostic EXpert System (REXS" konsentreer op fmansiele risiko-analise. Uitgaande vanaf 'n Vooruitskattingsmode~ en deur gebruik te maak van verskeie ekspertstelselkennisbasisse, poog die stelsel om die fmansiele risiko van 'n onderneming te evalueer en riglyne vir moontlike verbetering

An expert system to estimate SNM production at LWR systems

International Nuclear Information System (INIS)

Sandquist, G.M.; Allison, J.L.; Rogers, V.C.

1988-01-01

An artificial intelligence expert system, analysis of proliferation by expert system (APES), has been developed and tested to permit a nonexpert to quickly evaluate the capabilities and capacities of a reactor and reprocessing system for producing and separating plutonium [special nuclear material (SNM)] even when system information may be limited and uncertain. The present analysis domain of APES is directed at light water reactors and Purex reprocessing, but extension of the domain is planned

Expert system for USNRC emergency response

International Nuclear Information System (INIS)

Sebo, D.E.; Bray, M.A.; King, M.A.

1986-01-01

The Reactor Safety Assessment System (RSAS) is an expert system under development for the United States Nuclear Regulatory Commission (USNRC). RSAS is intended for use at the NRC's Operations Center in the event of a serious incident at a licensed nuclear power plant. RSAS is a situation assessment expert system which uses plant parametric data to generate conclusions for use by the NRC Reactor Safety Team. RSAS uses multiple rule bases and plant specific setpoint files in order to be applicable to all licensed power plants. RSAS currently covers several generic reactor types and power plants within those classes

Diagnosis - Using automatic test equipment and artificial intelligence expert systems

Science.gov (United States)

Ramsey, J. E., Jr.

Three expert systems (ATEOPS, ATEFEXPERS, and ATEFATLAS), which were created to direct automatic test equipment (ATE), are reviewed. The purpose of the project was to develop an expert system to troubleshoot the converter-programmer power supply card for the F-15 aircraft and have that expert system direct the automatic test equipment. Each expert system uses a different knowledge base or inference engine, basing the testing on the circuit schematic, test requirements document, or ATLAS code. Implementing generalized modules allows the expert systems to be used for any different unit under test. Using converted ATLAS to LISP code allows the expert system to direct any ATE using ATLAS. The constraint propagated frame system allows for the expansion of control by creating the ATLAS code, checking the code for good software engineering techniques, directing the ATE, and changing the test sequence as needed (planning).

Use of expert systems in nuclear power plants

International Nuclear Information System (INIS)

Uhrig, R.E.

1989-01-01

The application of technologies, particularly expert systems, to the control room activities in a nuclear power plant has the potential to reduce operator error and increase plant safety, reliability, and efficiency. Furthermore, there are a large number of nonoperating activities (testing, routine maintenance, outage planning, equipment diagnostics, and fuel management) in which expert systems can increase the efficiency and effectiveness of overall plant and corporate operations. This document presents a number of potential applications of expert systems in the nuclear power field. 36 refs., 2 tabs

Expert systems for automated maintenance of a Mars oxygen production system

Science.gov (United States)

Huang, Jen-Kuang; Ho, Ming-Tsang; Ash, Robert L.

1992-08-01

Application of expert system concepts to a breadboard Mars oxygen processor unit have been studied and tested. The research was directed toward developing the methodology required to enable autonomous operation and control of these simple chemical processors at Mars. Failure detection and isolation was the key area of concern, and schemes using forward chaining, backward chaining, knowledge-based expert systems, and rule-based expert systems were examined. Tests and simulations were conducted that investigated self-health checkout, emergency shutdown, and fault detection, in addition to normal control activities. A dynamic system model was developed using the Bond-Graph technique. The dynamic model agreed well with tests involving sudden reductions in throughput. However, nonlinear effects were observed during tests that incorporated step function increases in flow variables. Computer simulations and experiments have demonstrated the feasibility of expert systems utilizing rule-based diagnosis and decision-making algorithms.

Integrated Knowledge Based Expert System for Disease Diagnosis System

Science.gov (United States)

Arbaiy, Nureize; Sulaiman, Shafiza Eliza; Hassan, Norlida; Afizah Afip, Zehan

2017-08-01

The role and importance of healthcare systems to improve quality of life and social welfare in a society have been well recognized. Attention should be given to raise awareness and implementing appropriate measures to improve health care. Therefore, a computer based system is developed to serve as an alternative for people to self-diagnose their health status based on given symptoms. This strategy should be emphasized so that people can utilize the information correctly as a reference to enjoy healthier life. Hence, a Web-based Community Center for Healthcare Diagnosis system is developed based on expert system technique. Expert system reasoning technique is employed in the system to enable information about treatment and prevention of the diseases based on given symptoms. At present, three diseases are included which are arthritis, thalassemia and pneumococcal. Sets of rule and fact are managed in the knowledge based system. Web based technology is used as a platform to disseminate the information to users in order for them to optimize the information appropriately. This system will benefit people who wish to increase health awareness and seek expert knowledge on the diseases by performing self-diagnosis for early disease detection.

Concept of expert system for modal split in transportation planning

Directory of Open Access Journals (Sweden)

Popović Maja M.

2006-01-01

Full Text Available The objective of this paper is to develop a concept of expert system based on the survey of experts' opinions and their experience concerning relations in modal split, on the basis of parameters of transport system demand and transport supply, defined through PT travel time and city size, i.e. mean trip length. This expert system could be of use both to experts and less experienced planners who could apply the knowledge contained in this expert system for further improvement, on operational as well as on strategic level.

[Development of expert diagnostic system for common respiratory diseases].

Science.gov (United States)

Xu, Wei-hua; Chen, You-ling; Yan, Zheng

2014-03-01

To develop an internet-based expert diagnostic system for common respiratory diseases. SaaS system was used to build architecture; pattern of forward reasoning was applied for inference engine design; ASP.NET with C# from the tool pack of Microsoft Visual Studio 2005 was used for website-interview medical expert system.The database of the system was constructed with Microsoft SQL Server 2005. The developed expert system contained large data memory and high efficient function of data interview and data analysis for diagnosis of various diseases.The users were able to perform this system to obtain diagnosis for common respiratory diseases via internet. The developed expert system may be used for internet-based diagnosis of various respiratory diseases,particularly in telemedicine setting.

Functional organization of intrinsic connectivity networks in Chinese-chess experts.

Science.gov (United States)

Duan, Xujun; Long, Zhiliang; Chen, Huafu; Liang, Dongmei; Qiu, Lihua; Huang, Xiaoqi; Liu, Timon Cheng-Yi; Gong, Qiyong

2014-04-16

The functional architecture of the human brain has been extensively described in terms of functional connectivity networks, detected from the low-frequency coherent neuronal fluctuations during a resting state condition. Accumulating evidence suggests that the overall organization of functional connectivity networks is associated with individual differences in cognitive performance and prior experience. Such an association raises the question of how cognitive expertise exerts an influence on the topological properties of large-scale functional networks. To address this question, we examined the overall organization of brain functional networks in 20 grandmaster and master level Chinese-chess players (GM/M) and twenty novice players, by means of resting-state functional connectivity and graph theoretical analyses. We found that, relative to novices, functional connectivity was increased in GM/Ms between basal ganglia, thalamus, hippocampus, and several parietal and temporal areas, suggesting the influence of cognitive expertise on intrinsic connectivity networks associated with learning and memory. Furthermore, we observed economical small-world topology in the whole-brain functional connectivity networks in both groups, but GM/Ms exhibited significantly increased values of normalized clustering coefficient which resulted in increased small-world topology. These findings suggest an association between the functional organization of brain networks and individual differences in cognitive expertise, which might provide further evidence of the mechanisms underlying expert behavior. Copyright © 2014 Elsevier B.V. All rights reserved.

Topics in expert system design methodologies and tools

CERN Document Server

Tasso, C

1989-01-01

Expert Systems are so far the most promising achievement of artificial intelligence research. Decision making, planning, design, control, supervision and diagnosis are areas where they are showing great potential. However, the establishment of expert system technology and its actual industrial impact are still limited by the lack of a sound, general and reliable design and construction methodology.This book has a dual purpose: to offer concrete guidelines and tools to the designers of expert systems, and to promote basic and applied research on methodologies and tools. It is a coordinated coll

Expert System Applications for the Electric Power Industry: Proceedings

International Nuclear Information System (INIS)

1992-06-01

A conference on Expert System Applications for the Electric Power Industry was held in Boston on September 8--11, 1991 to provide a forum for technology transfer, technical information exchange, and education. The conference was attended by more than 150 representatives of electric utilities, equipment manufacturers, engineering consulting organizations, universities, national laboratories, and government agencies. The meeting included a keynote address, 70 papers, and 18 expert system demonstrations. Sessions covered expert systems in power system planning operations, fossil power plant applications, nuclear power plant applications, and intelligent user interfaces. The presentations showed how expert systems can provide immediate benefits to the electric power industry in many applications. Individual papers are indexed separately

A study on expert system applications for nuclear power plant

International Nuclear Information System (INIS)

Huh, Young Hwan; Kim, Yeong Jin; Park, Nam Seog; Dong, In Sook; Choi, In Seon

1987-12-01

The application of artificial intelligence techniques to nuclear power plants such as expert systems is rapidly emerging. expert systems can contribute significantly to the availability and the improved operation and safety of nuclear power plants. The objective of the project is to develop an expert system in a selected application area in the nuclear power plants. This project will last for 3 years. The first year's tasks are: - Information collection and literature survey on expert systems. - Analysis of several applicable areas for applying AI technologies to the nuclear power plants. - Conceptual design of a few selected domains. - Selection of hardware and software tools for the development of the expert system

An expert system for diesel generator diagnostics

International Nuclear Information System (INIS)

Bley, D.C.; Read, J.W.; Kaplan, S.; Liming, J.K.; Brosee, N.M.; Hanley, D.W.

1987-01-01

The idea of developing artificial intelligence (AI) systems to capture the knowledge of human experts is receiving much attention these days. The idea is even more attractive when important expertise resides within a single individual, especially one who is nearing retirement and who has not otherwise recorded or passed along his important knowledge and thought processes. The diesel generators at Pilgrim Nuclear Power Station have performed exceptionally well, primarily due to the care and attention of one man. Therefore, the authors are constructing an expert system for the diagnosis of diesel generator problems at Pilgrim. This paper includes a description of the expert system design and operation, examples from the knowledge base, and sample diagnoses, so the reader can observe the process in action

Analysis of complex systems using neural networks

International Nuclear Information System (INIS)

Uhrig, R.E.

1992-01-01

The application of neural networks, alone or in conjunction with other advanced technologies (expert systems, fuzzy logic, and/or genetic algorithms), to some of the problems of complex engineering systems has the potential to enhance the safety, reliability, and operability of these systems. Typically, the measured variables from the systems are analog variables that must be sampled and normalized to expected peak values before they are introduced into neural networks. Often data must be processed to put it into a form more acceptable to the neural network (e.g., a fast Fourier transformation of the time-series data to produce a spectral plot of the data). Specific applications described include: (1) Diagnostics: State of the Plant (2) Hybrid System for Transient Identification, (3) Sensor Validation, (4) Plant-Wide Monitoring, (5) Monitoring of Performance and Efficiency, and (6) Analysis of Vibrations. Although specific examples described deal with nuclear power plants or their subsystems, the techniques described can be applied to a wide variety of complex engineering systems

On the performance of social network and likelihood-based expert weighting schemes

International Nuclear Information System (INIS)

Cooke, Roger M.; ElSaadany, Susie; Huang Xinzheng

2008-01-01

Using expert judgment data from the TU Delft's expert judgment database, we compare the performance of different weighting schemes, namely equal weighting, performance-based weighting from the classical model [Cooke RM. Experts in uncertainty. Oxford: Oxford University Press; 1991.], social network (SN) weighting and likelihood weighting. The picture that emerges with regard to SN weights is rather mixed. SN theory does not provide an alternative to performance-based combination of expert judgments, since the statistical accuracy of the SN decision maker is sometimes unacceptably low. On the other hand, it does outperform equal weighting in the majority of cases. The results here, though not overwhelmingly positive, do nonetheless motivate further research into social interaction methods for nominating and weighting experts. Indeed, a full expert judgment study with performance measurement requires an investment in time and effort, with a view to securing external validation. If high confidence in a comparable level of validation can be obtained by less intensive methods, this would be very welcome, and would facilitate the application of structured expert judgment in situations where the resources for a full study are not available. Likelihood weights are just as resource intensive as performance-based weights, and the evidence presented here suggests that they are inferior to performance-based weights with regard to those scoring variables which are optimized in performance weights (calibration and information). Perhaps surprisingly, they are also inferior with regard to likelihood. Their use is further discouraged by the fact that they constitute a strongly improper scoring rule

Application of expert systems in damage assessment of reinforced concrete structures

International Nuclear Information System (INIS)

Fazel Zarandi, M. H.; Sobhani, J.

2003-01-01

Expert systems are receiving great attentions in construction industry to support decision making processes in diagnostics, design, repair and rehabilitation of the structures. Although several expert systems have been examined in engineering since the 1970's, their applications in construction industry are rate. This was largely due to the lack of expert system tools available to represent the domain knowledge. Lack of flexibility, applicability, and robustness of the classical models, have forced the scientists to discover the ability of the expert systems in problem solving of civil engineering. This paper present an expert system for diagnosis the deterioration of concrete structures. This expert system emphasizes on cracking distress in reinforced concrete elements. A case study has been presented to examine and evaluate the proposed expert system. The system demonstrates a straightforward method for diagnosing the cause of reinforced concrete elements cracking

Application of expert system to nuclear power plant operation and guidance system

International Nuclear Information System (INIS)

Goto, M.; Takada, Y.

1990-01-01

For a nuclear power plant, it is important that an expert system supplies useful information to the operator to meet the increasing demand for high-level plant operation. It is difficult to build a user-friendly expert system that supplies useful information in real time using existing general-purpose expert system shells. Therefore a domain-specific expert system shell with a useful knowledge representation for problem-solving in nuclear power plant operation was selected. The Plant Table (P/T) representation format was developed for description of a production system for nuclear power plant operation knowledge. The P/T consists of plant condition representation designed to process multiple inputs and single output. A large number of operation inputs for several plant conditions are divided into 'timing conditions', 'preconditions' and 'completion conditions' to facilitate knowledge-base build-up. An expert system for a Nuclear Power Plant Operation and Guidance System utilizing the P/T was developed to assist automatic plant operation and surveillance test operation. In these systems, automatic plant operation signals to the plant equipment and operation guidance messages to the operators are both output based on the processing and assessment of plant operation conditions by the P/T. A surveillance test procedure guide for major safety-related systems, such as those for emergency core cooling systems, is displayed on a CRT (Cathode Ray Tube) and test results are printed out. The expert system for a Nuclear Power Plant Operation and Guidance System has already been successfully applied to Japanese BWR plants

European Network of Bipolar Research Expert Centre (ENBREC)

DEFF Research Database (Denmark)

Henry, Chantal; Andreassen, Ole A; Barbato, Angelo

2013-01-01

Bipolar disorders rank as one of the most disabling illnesses in working age adults worldwide. Despite this, the quality of care offered to patients with this disorder is suboptimal, largely due to limitations in our understanding of the pathology. Improving this scenario requires the development...... centres across Europe can collaborate on a wide range of basic science and clinical programmes using shared protocols. This paper is to describe the network and how it aims to improve the quality and effectiveness of research in a neglected priority area....... of a critical mass of expertise and multicentre collaborative projects. Within the framework of the European FP7 programme, we developed a European Network of Bipolar Research Expert Centres (ENBREC) designed specifically to facilitate EU-wide studies. ENBREC provides an integrated support structure...... facilitating research on disease mechanisms and clinical outcomes across six European countries (France, Germany, Italy, Norway, Spain and the UK). The centres are adopting a standardised clinical assessment that explores multiple aspects of bipolar disorder through a structured evaluation designed to inform...

AN EXPERT SYSTEM USED IN DESIGN

Directory of Open Access Journals (Sweden)

Hüdayim BAŞAK

2001-03-01

Full Text Available In this work, an expert system used in computer aided design has been developed. In the developed program, the features which are used in the models prepared by a feature based design program are evaluated by the expert system module and are used in part modeling after determining of their compatibilty according to the rules. This program, particulary for those who do not know or know very little manufacturing stages, accomplishes the duty of informing and directing them. The program developed warns the user for design mistakes made during modeling.

QUEST: Quality of Expert Systems

NARCIS (Netherlands)

Perre, M.

1991-01-01

TNO Physics and Electronics laboratory, in collaboration with the University of Limburg and the Research Institute for Knowledge Systems, worked on a technology project named 'QUEST: Quality of Expert Systems' [FEL90]. QUEST was carried out under commision of the Dutch Ministry of Defence. A strong

Problematic Aspects of the Use of Expert Systems in Law

Directory of Open Access Journals (Sweden)

Marius Kalinauskas

2011-08-01

Full Text Available Summary. The usage of expert systems in law brings many problematic questions. Complexity and intricacy of law, combined with limited possibilities of information technologies makes it difficult to create flawlessly working expert systems. In this article the author analyses problematic aspects related to expert system usage in law. Comparisons of various research are made according to analysis of scientific articles. The author analyses practical difficulties of legal norm representation, creation of expert knowledge ontology, expert systems liability issues. Legal responsibility of expert system developers, users, and owners are also covered in this paper. Creation of legal ontologies is a complicated process because of the nature of the subject itself and the complexity and quantity of knowledge which must be represented in order to have fully functional legal expert system. Legal information basically consists of legal norms, doctrine, precedents and expert knowledge. All of these areas have specific representation issues, but the most difficult part is to make ontology and representation of expert knowledge. Different experts may have distinct points of view in some similar cases. Human decisions are made not only by applying certain rules to the problem decision pattern. Providence, analytical skills and critical thinking is required in legal professional work. Human reasoning and decision-making is not only based on symbolic values, it also consists of intermediate symbolic assumptions. So the question is: is it possible to give a clear structure to something which has no permanent state? The other problem which is analyzed in this article is artificial reasoning methods, which are basically different forms of pattern recognition with some specific methods applied to them. The second part of the paper analyses the liability of expert systems. Nowadays expert systems can’t be legally responsible for their decisions. They lack

Problematic Aspects of the Use of Expert Systems in Law

Directory of Open Access Journals (Sweden)

Marius Kalinauskas

2013-08-01

Full Text Available The usage of expert systems in law brings many problematic questions. Complexity and intricacy of law, combined with limited possibilities of information technologies makes it difficult to create flawlessly working expert systems. In this article the author analyses problematic aspects related to expert system usage in law. Comparisons of various research are made according to analysis of scientific articles. The author analyses practical difficulties of legal norm representation, creation of expert knowledge ontology, expert systems liability issues. Legal responsibility of expert system developers, users, and owners are also covered in this paper. Creation of legal ontologies is a complicated process because of the nature of the subject itself and the complexity and quantity of knowledge which must be represented in order to have fully functional legal expert system. Legal information basically consists of legal norms, doctrine, precedents and expert knowledge. All of these areas have specific representation issues, but the most difficult part is to make ontology and representation of expert knowledge. Different experts may have distinct points of view in some similar cases. Human decisions are made not only by applying certain rules to the problem decision pattern. Providence, analytical skills and critical thinking is required in legal professional work. Human reasoning and decision-making is not only based on symbolic values, it also consists of intermediate symbolic assumptions. So the question is: is it possible to give a clear structure to something which has no permanent state? The other problem which is analyzed in this article is artificial reasoning methods, which are basically different forms of pattern recognition with some specific methods applied to them. The second part of the paper analyses the liability of expert systems. Nowadays expert systems can’t be legally responsible for their decisions. They lack intellectual

Expert Graphics System Research in the Department of the Navy.

Science.gov (United States)

Duff, Jon M.

1987-01-01

Presents current trends in the development of expert systems within the Department of the Navy, particularly research into expert graphics systems intended to support the Authoring Instructional Methods (AIM) research project. Defines artificial intelligence and expert systems. Discusses the operations and functions of the Navy's intelligent…

Artificial Intelligence and Expert Systems.

Science.gov (United States)

Wilson, Harold O.; Burford, Anna Marie

1990-01-01

Delineates artificial intelligence/expert systems (AI/ES) concepts; provides an exposition of some business application areas; relates progress; and creates an awareness of the benefits, limitations, and reservations of AI/ES. (Author)

Expert systems for C3I. Volume 1. A user's introduction

Science.gov (United States)

Clapp, J. A.; Hockett, S. M.; Prelle, M. J.; Tallant, A. M.; Triant, D. D.

1985-10-01

There has been a tremendous burgeoning of interest in artificial intelligence (AI) over the last few years. Investments of commercial and government sponsors reflect a widespread belief that AI is now ready for practical applications. The area of AI currently receiving the greatest attention and investment is expert system technology. Most major high tech corporations have begun to develop expert systems, and many software houses specializing in expert system tools and applications have recently appeared. The defense community is one of the heaviest investors in expert system technology, and within this community one of the application areas receiving greatest attention is C3I. Many ESD programs are now beginning to ask whether expert system applications for C3I are ready for incorporation into ESD-developed systems, and, if so, what are the potential benefits and risks of doing so. This report was prepared to help ESD and MITRE personnel working on acquisition programs to address these issues and to gain a better understanding of what expert systems are all about. The primary intention of this report is to investigate what expert systems are and the advances that are being made in expert system technology for C3I applications. The report begins with a brief tutorial on expert systems, emphasizing how they differ from conventional software systems and what they are best at doing.

Employing expert systems for process control

International Nuclear Information System (INIS)

Ahrens, W.

1987-01-01

The characteristic features of expert systems are explained in detail, and the systems' application in process control engineering. Four points of main interest are there, namely: Applications for diagnostic tasks, for safety analyses, planning, and training and expert training. For the modelling of the technical systems involved in all four task fields mentioned above, an object-centred approach has shown to be the suitable method, as process control techniques are determined by technical objects that in principle are specified by data sheets, schematic representations, flow charts, and plans. The graphical surface allows these data to be taken into account, so that the object can be displayed in the way best suited to the individual purposes. (orig./GL) [de

Telecontrol - Expert systems. Real-time monitoring and remote diagnostic

Energy Technology Data Exchange (ETDEWEB)

Lam, A.

1996-09-01

The role of expert systems in programming simple and complex tasks in utilities companies was discussed with examples from B.C. Hydro, where expert systems have been used in such diverse applications as an in-house programmable logic controller (PLC) training course, and a machine audit on a 150 MW steam turbine generating unit at their Burrard Thermal Generating Plant. The PLC tutoring program uses expert system technology for the air blast circuit breakers` air drier system, for individualized on-site training. The steam turbine audits (an eight-month long project) were performed remotely by dialing an on-site computer configured with customized expert software. Details of these, and other potential applications, such as transformer monitoring and diagnostics, circuit breaker performance analysis, and information management, were described.

Expert systems - basic principles and possible applications in nuclear energy

International Nuclear Information System (INIS)

Cain, D.G.; Schmidt, F.

1987-01-01

One of the primary goals of the application of mathematical methods and computational techniques in reactor physics is the effective and accurate solution of the neutron diffusion equation under various conditions. To reach this goal still requires much skill, experience, knowledge and imagination as can be seen from various contributions at this and other conferences. Experts are necessary. Will expert systems replace them. We shall discuss this question by describing the basic principles of problem solving by expert systems as compared to problem solving by mathematical and computational methods. From this we shall identify areas of possible applications of the new techniques in nuclear energy and develop some thoughts on present limitations. As a result we conclude that expert systems will not be able to replace experts as long as the experts use the systems to improve their own expertise

Feasibility of an AI-Based Measure of the Hand Motions of Expert and Novice Surgeons

Directory of Open Access Journals (Sweden)

Munenori Uemura

2018-01-01

Full Text Available This study investigated whether parameters derived from hand motions of expert and novice surgeons accurately and objectively reflect laparoscopic surgical skill levels using an artificial intelligence system consisting of a three-layer chaos neural network. Sixty-seven surgeons (23 experts and 44 novices performed a laparoscopic skill assessment task while their hand motions were recorded using a magnetic tracking sensor. Eight parameters evaluated as measures of skill in a previous study were used as inputs to the neural network. Optimization of the neural network was achieved after seven trials with a training dataset of 38 surgeons, with a correct judgment ratio of 0.99. The neural network that prospectively worked with the remaining 29 surgeons had a correct judgment rate of 79% for distinguishing between expert and novice surgeons. In conclusion, our artificial intelligence system distinguished between expert and novice surgeons among surgeons with unknown skill levels.

Expert system. Based advisory system for the operator's mental activities support

International Nuclear Information System (INIS)

Gieci, A.; Macko, J.; Mosny, J.

2000-01-01

The operator's mental activity is the most important part of his work. A processing of a large amount of the information by the operator is possible only if he/she possesses appropriate cognitive skills. To facilitate the novice's acquisition of the experienced operator's cognitive skills of the decision-making process a special type of the expert system was developed. The cognitive engineering's models and problem-solving methodology constitutes the basis of this expert system. The article gives an account of the prototype of the mentioned expert system developed to aid the whole mental activity of the nuclear power plant operator during his decision-making process. (author)

Expert systems for assisting the analysis of hazards

International Nuclear Information System (INIS)

Evrard, J.M.; Martinez, J.M.; Souchet, Y.

1990-01-01

The advantage of applying expert systems in the analysis of safety in the operation of nuclear power plants is discussed. Expert systems apply a method based on a common representation of nuclear power plants. The main steps of the method are summarized. The applications given concern in the following fields: the analysis of hazards in the electric power supplies of a gas-graphite power plant; the evaluation of the availability of safety procedures in a PWR power plant; the search for the sources of leakage in a PWR power plant. The analysis shows that expert systems are a powerful tool in the study of safety of nuclear power plants [fr

An expert system for spare parts inventory control

International Nuclear Information System (INIS)

Kim, K.Y.; Chen, P.Y.C.; Okrent, D.

1987-01-01

This paper describes an expert system which can handle spare part requirements not only in corrective maintenance (CM) or preventive maintenance (PM), but also when failure rates of components or parts are updated by new data or by predictive maintenance (PDM), and which can also decide optimum stocking level of each spare part. This expert system provides a maintenance (or inventory) manager with an improved basis for decision making in the maintenance related to spare parts. The definitions of PM and PDM from NUREG-1212 (USNRC 1986) are used herein. This expert system used Intellignece/Compiler (Intelligence Ware, 1986) as a language/tool in the IBM-PC

Considerations in development of expert systems for real-time space applications

Science.gov (United States)

Murugesan, S.

1988-01-01

Over the years, demand on space systems has increased tremendously and this trend will continue for the near future. Enhanced capabilities of space systems, however, can only be met with increased complexity and sophistication of onboard and ground systems. Artificial Intelligence and expert system techniques have great potential in space applications. Expert systems could facilitate autonomous decision making, improve in-orbit fault diagnosis and repair, enhance performance and reduce reliance on ground support. However, real-time expert systems, unlike conventional off-line consultative systems, have to satisfy certain special stringent requirements before they could be used for onboard space applications. Challenging and interesting new environments are faced while developing expert system space applications. This paper discusses the special characteristics, requirements and typical life cycle issues for onboard expert systems. Further, it also describes considerations in design, development, and implementation which are particularly important to real-time expert systems for space applications.

A Belief Rule-Based Expert System to Diagnose Influenza

DEFF Research Database (Denmark)

Hossain, Mohammad Shahadat; Khalid, Md. Saifuddin; Akter, Shamima

2014-01-01

, development and application of an expert system to diagnose influenza under uncertainty. The recently developed generic belief rule-based inference methodology by using the evidential reasoning (RIMER) approach is employed to develop this expert system, termed as Belief Rule Based Expert System (BRBES......). The RIMER approach can handle different types of uncertainties, both in knowledge representation, and in inference procedures. The knowledge-base of this system was constructed by using records of the real patient data along with in consultation with the Influenza specialists of Bangladesh. Practical case...

ASSESSMENT OF POWER QUALITY DISTURBANCE USING EXPERT SYSTEM

OpenAIRE

A.N.MALLESWARA RAO,; Dr. K.RAMESH REDDY,; Dr. B.V.SANKER RAM

2011-01-01

This paper describes a fuzzy expert system in order to understand and deal with power quality problems encountered in distribution systems in a better way. Because of the technology and software now available this monitoring is highly effective, the fuzzy expert system not only can provide information about the quality of the power and the causes of power system disturbances, but it can identify problem conditions throughout the system before they cause widespread customer complains and equip...

NDT-based bridge condition assessment supported by expert tools

Science.gov (United States)

Bień, J.; KuŻawa, M.

2016-06-01

This paper is focused on the progress in the application of Expert Tools supporting integration of inspection and NDT testing findings in order to effectuate effective decision making by bridge owners. Possibilities of knowledge representation in the intelligent computer Expert Tools by means of the multi-level hybrid network technology are described. These multi-level hybrid networks can be built of neural, fuzzy and functional components depending on the problem that needs to be solved and on the type of available information. Application of the technology is illustrated by an example of the Bridge Evaluation Expert Function (BEEF) implemented in the Railway Bridge Management System "SMOK" operated by the Polish State Railways.

The vulcain N expert fire system

International Nuclear Information System (INIS)

Roche, A.

1989-03-01

The Institute for Nuclear Safety and Protection (IPSN) has begun work on an expert system to aid in the diagnosis of fire hazards in nuclear installations. This system is called Vulcain N and is designed as a support tool for the analyses carried out by the IPSN. Vulcain N, is based on the Vulcain expert system already developed by Bertin for its own needs and incorporates the specific rules and know-how of the IPSN experts. The development of Vulcain N began in October 1986 with the drawing up of the technical specifications, and should be completed by the end of 1988. Vulcain N brings together knowledge from a number of different domains: the locations of the combustible materials, the thermal characteristics of the combustible materials and of the walls of the room, the ventilation conditions and, finally, knowledge of fire experts concerning the development of fire. The latter covers four levels of expert knowledge: standards and their associated calculations, the simplified physics of the fire enabling more precise values to be obtained for the figures given by the standards, the rules and knowledge which enables a certain number of deductions to be made concerning the development of the fire, and a numerical simulation code which can be used to monitor the variation of certain characteristic parameters with time. For a given fire out-break scenario, Vulcain N performs diagnosis of different aspects: development of fire, effect of ventilation, emergency action possibilities, propagation hazards, etc. Owing to its flexibility, it can be used in the analysis of fire hazards to simulate a number of possible scenarios and to very rapidly deduce the essential, predominant factors. It will also be used to assist in drafting emergency procedures for application in facilities with nuclear hazards

Expert systems applied to two problems in nuclear power plants

International Nuclear Information System (INIS)

Kim, K.Y.

1988-01-01

This dissertation describes two prototype expert systems applied to two problems in nuclear power plants. One problem is spare parts inventory control, and the other one is radionuclide release from containment during severe accident. The expert system for spare parts inventory control can handle spare parts requirements not only in corrective, preventive, or predictive maintenance, but also when failure rates of components or parts are updated by new data. Costs and benefits of spare parts inventory acquisition are evaluated with qualitative attributes such as spare part availability to provide the inventory manager with an improved basis for decision making. The expert system is implemented with Intelligence/Compiler on an IBM-AT. The other expert system for radionuclide release from containment can estimate magnitude, type, location, and time of release of radioactive materials from containment during a severe accident nearly on line, based on the actual measured physical parameters such as temperature and pressure inside the containment. The expert system has a function to check the validation of sensor data. The expert system is implemented with KEE on a Symbolics LISP machine

Tools and technologies for expert systems: A human factors perspective

Science.gov (United States)

Rajaram, Navaratna S.

1987-01-01

It is widely recognized that technologies based on artificial intelligence (AI), especially expert systems, can make significant contributions to the productivity and effectiveness of operations of information and knowledge intensive organizations such as NASA. At the same time, these being relatively new technologies, there is the problem of transfering technology to key personnel of such organizations. The problems of examining the potential of expert systems and of technology transfer is addressed in the context of human factors applications. One of the topics of interest was the investigation of the potential use of expert system building tools, particularly NEXPERT as a technology transfer medium. Two basic conclusions were reached in this regard. First, NEXPERT is an excellent tool for rapid prototyping of experimental expert systems, but not ideal as a delivery vehicle. Therefore, it is not a substitute for general purpose system implementation languages such a LISP or C. This assertion probably holds for nearly all such tools on the market today. Second, an effective technology transfer mechanism is to formulate and implement expert systems for problems which members of the organization in question can relate to. For this purpose, the LIghting EnGineering Expert (LIEGE) was implemented using NEXPERT as the tool for technology transfer and to illustrate the value of expert systems to the activities of the Man-System Division.

The Health Experts onLine at Portsmouth (HELP) system: One-year review of adult and Pediatric Asynchronous Telehealth Consultations.

Science.gov (United States)

Lin, Andrew H; Cole, Jacob H; Chin, John C; Mahnke, Chirstopher Becket

2016-01-01

The Health Experts onLine at Portsmouth teleconsultation system is designed to connect health providers in the Navy Medicine East Region to specialists at Naval Medical Center Portsmouth. A review of the first year of the Health Experts onLine at Portsmouth system was performed. Data on each teleconsultation were extracted from the Health Experts onLine at Portsmouth system database and analyzed. From June 2014 to May 2015 there have been 585 teleconsultations. Providers stationed on 36 ships/submarines and at 28 remote military treatment facilities have utilized the Health Experts onLine at Portsmouth system. Over 280 specialists in 34 different specialties were consulted. The median time to first response from a specialist was 6 h and 8 min, with 75% of all consults being addressed within 24 h. Eighteen medevacs were recommended. Thirty-nine potential medevacs were prevented, and 100 potential civilian network deferrals were prevented, resulting in an estimated savings of over US$580,000. Based on the 1-year metrics, Health Experts onLine at Portsmouth has provided improved access and quality of care to service members and their families throughout the Navy Medicine East Region. It has helped avoid over US$580,000 in unnecessary cost burden. Further review at the 2-year time interval will demonstrate the continued growth and effectiveness of the Health Experts onLine at Portsmouth system.

Expert Systems in Government Administration

OpenAIRE

Weintraub, Joseph

1989-01-01

Artificial Intelligence is solving more and more real world problems, but penetration into the complexities of government administration has been minimal. The author suggests that combining expert system technology with conventional procedural computer systems can lead to substantial efficiencies. Business rules can be removed from business-oriented computer systems and stored in a separate but integrated knowledge base, where maintenance will be centralized. Fourteen specific practical appli...

Operation and maintenance support expert systems for BWR nuclear power plants

International Nuclear Information System (INIS)

Miyazawa, Tatsuo; Hayakawa, Hiroyasu; Fukutomi, Shigeki

1990-01-01

Toshiba has been developing expert systems for operation and maintenance support in BWRs. These expert systems are designed to be integrated with conventional plant monitoring systems, and maintenance management systems to provide both comprehensive and powerful support capabilities. Some of these expert systems are already being used on a trial basis both within Toshiba and in electric power utility companies. This paper describes expert systems for the support of plant and equipment monitoring, maintenance scheduling, and maintenance work procedure planning. (author)

Diagnosing battery behavior with an expert system in Prolog

International Nuclear Information System (INIS)

Kirkwood, N.; Weeks, D.J.

1986-01-01

Power for the Hubble Space Telescope comes from a system of 20 solar panel assemblies (SPAs) and six nickel-cadmium batteries. The HST battery system is simulated by the HST Electrical Power System (EPS) testbed at Marshall Space Flight Center. The Nickel Cadmium Battery Expert System (NICBES) is being used to diagnose faults of the testbed system, evaluate battery status and provide decision support for the engineer. Extensive telemetry of system operating conditions is relayed through a DEC LSI-11, and sent on to an IBM PC-AT. A BASIC program running on the PC monitors the flow of data, figures cell divergence and recharge ratio and stores these values, along with other selected data, for use by the expert system. The expert system is implemented in the logic programming language Prolog. It has three modes of operation: fault diagnosis, status and advice, and decision support. An alert or failure of the system will trigger a diagnosis by the system to assist the operator. The operator can also request battery status information as well as a number of plots and histograms of recent battery behavior. Trends in EOC and EOD voltage, recharge ratio and divergence are used by the expert system in its analysis of battery status. A future enhancement to the system includes the statistical prediction of battery life. Incorporating learning into the expert system is another possible enhancement; This is a difficult task, but one which could promise great rewards in improved battery performance

Design of an expert system for the development and formulation of push-pull osmotic pump tablets containing poorly water-soluble drugs.

Science.gov (United States)

Zhang, Zhi-hong; Dong, Hong-ye; Peng, Bo; Liu, Hong-fei; Li, Chun-lei; Liang, Min; Pan, Wei-san

2011-05-30

The purpose of this article was to build an expert system for the development and formulation of push-pull osmotic pump tablets (PPOP). Hundreds of PPOP formulations were studied according to different poorly water-soluble drugs and pharmaceutical acceptable excipients. The knowledge base including database and rule base was built based on the reported results of hundreds of PPOP formulations containing different poorly water-soluble drugs and pharmaceutical excipients and the experiences available from other researchers. The prediction model of release behavior was built using back propagation (BP) neural network, which is good at nonlinear mapping and learning function. Formulation design model was established based on the prediction model of release behavior, which was the nucleus of the inference engine. Finally, the expert system program was constructed by VB.NET associating with SQL Server. Expert system is one of the most popular aspects in artificial intelligence. To date there is no expert system available for the formulation of controlled release dosage forms yet. Moreover, osmotic pump technology (OPT) is gradually getting consummate all over the world. It is meaningful to apply expert system on OPT. Famotidine, a water insoluble drug was chosen as the model drug to validate the applicability of the developed expert system. Copyright © 2011 Elsevier B.V. All rights reserved.

Web-based expert system for foundry pollution prevention

Science.gov (United States)

Moynihan, Gary P.

2004-02-01

Pollution prevention is a complex task. Many small foundries lack the in-house expertise to perform these tasks. Expert systems are a type of computer information system that incorporates artificial intelligence. As noted in the literature, they provide a means of automating specialized expertise. This approach may be further leveraged by implementing the expert system on the internet (or world-wide web). This will allow distribution of the expertise to a variety of geographically-dispersed foundries. The purpose of this research is to develop a prototype web-based expert system to support pollution prevention for the foundry industry. The prototype system identifies potential emissions for a specified process, and also provides recommendations for the prevention of these contaminants. The system is viewed as an initial step toward assisting the foundry industry in better meeting government pollution regulations, as well as improving operating efficiencies within these companies.

Expert system for quality control in the INIS database

International Nuclear Information System (INIS)

Todeschini, C.; Tolstenkov, A.

1990-05-01

An expert system developed to identify input items to INIS database with a high probability of containing errors is described. The system employs a Knowledge Base constructed by the interpretation of a large number of intellectual choices or expert decisions made by human indexers and incorporated in the INIS database. On the basis of the descriptor indexing, the system checks the correctness of the categorization. A notable feature of the system is its capability of self improvement by the continuous updating of the Knowledge Base. The expert system has also been found to be extremely useful in identifying documents with poor indexing. 3 refs, 9 figs

Expert system for quality control in the INIS database

Energy Technology Data Exchange (ETDEWEB)

Todeschini, C; Tolstenkov, A [International Atomic Energy Agency, Vienna (Austria)

1990-05-01

An expert system developed to identify input items to INIS database with a high probability of containing errors is described. The system employs a Knowledge Base constructed by the interpretation of a large number of intellectual choices or expert decisions made by human indexers and incorporated in the INIS database. On the basis of the descriptor indexing, the system checks the correctness of the categorization. A notable feature of the system is its capability of self improvement by the continuous updating of the Knowledge Base. The expert system has also been found to be extremely useful in identifying documents with poor indexing. 3 refs, 9 figs.

Expert systems development: some problems, motives and issues in an exploratory study

International Nuclear Information System (INIS)

Mehdi Sagheb-Tehrani.

1993-10-01

Even though expert systems (ES) have been in use since the early eighties, there is a remarkable lack of a strong theoretical base for handling expert systems development problems. There is a requirement in the ES field for theories or explanatory models to formulate propositions, to conduct research and interpret findings in a coherent way. This work presents an exploratory investigation designed to identify some problems, motives and issues associated with developing expert systems. Totally, twenty-five expert systems were developed by various organizations which participated in the study. The study attempts to provide evidence that either supports or refutes the anecdotes, gossips and speculations currently being spread through the academic journals dealing with the expert systems development in organizations. This study provides evidence that knowledge acquisition is indeed the bottleneck of expert systems development. It also points out that most expert systems are still in the prototype stage, and that current expert systems are mostly used for aiding the decision making of less skilled domain personnel and to a lesser extent for advice to experts. The rationale behind these uses seems to be the search by organizations for better decision making in the hope of improving competitiveness. A conceptual model of expert systems development is introduced based upon theoretical studies and the findings of this study from which some hypotheses are drawn. The main objective of the model is to contribute to a larger theoretical framework. Another aim is to create a broader theoretical framework for expert systems development in order to implement such systems more successfully. The results of the study confirm that the linkages of various concepts involved in the expert systems development process are very important for the design of a successful expert system project

Knowledge Representation Using Multilevel Flow Model in Expert System

International Nuclear Information System (INIS)

Wang, Wenlin; Yang, Ming

2015-01-01

As for the knowledge representation, of course, there are a great many methods available for knowledge representation. These include frames, causal models, and many others. This paper presents a novel method called Multilevel Flow Model (MFM), which is used for knowledge representation in G2 expert system. Knowledge representation plays a vital role in constructing knowledge bases. Moreover, it also has impact on building of generic fault model as well as knowledge bases. The MFM is particularly useful to describe system knowledge concisely as domain map in expert system when domain experts are not available

Knowledge Representation Using Multilevel Flow Model in Expert System

Energy Technology Data Exchange (ETDEWEB)

Wang, Wenlin; Yang, Ming [Harbin Engineering University, Harbin (China)

2015-05-15

As for the knowledge representation, of course, there are a great many methods available for knowledge representation. These include frames, causal models, and many others. This paper presents a novel method called Multilevel Flow Model (MFM), which is used for knowledge representation in G2 expert system. Knowledge representation plays a vital role in constructing knowledge bases. Moreover, it also has impact on building of generic fault model as well as knowledge bases. The MFM is particularly useful to describe system knowledge concisely as domain map in expert system when domain experts are not available.

An expert system for USNRC emergency response

International Nuclear Information System (INIS)

Sebo, D.E.; Bray, M.A.; King, M.A.

1986-01-01

The Reactor Safety Assessment System (RSAS) is an expert system under development for the United States Nuclear Regulatory Commission (USNRC). RSAS is intended for use at the NRO's Operations Center in the event of a serious incident at a licensed nuclear power plant. RSAS is a situation assessment expert system which uses plant parametric data to generate conclusions for use by the NRC Reactor Safety Team. RSAS uses multiple rule bases and plant specific setpoint files in order to be applicable to all licensed power plants. RSAS currently covers several generic reactor types and power plants within those classes

An Expert System for Designing Fire Prescriptions

Science.gov (United States)

Elizabeth Reinhardt

1987-01-01

Managers use prescribed fire to accomplish a variety of resource objectives. The knowledge needed to design successful prescriptions is both quantitative and qualitative. Some of it is available through publications and computer programs, but much of the knowledge of expert practitioners has never been collected or published. An expert system being developed at the,...

Fuzzy Expert System for Heart Attack Diagnosis

Science.gov (United States)

Hassan, Norlida; Arbaiy, Nureize; Shah, Noor Aziyan Ahmad; Afizah Afif@Afip, Zehan

2017-08-01

Heart attack is one of the serious illnesses and reported as the main killer disease. Early prevention is significant to reduce the risk of having the disease. The prevention efforts can be strengthen through awareness and education about risk factor and healthy lifestyle. Therefore the knowledge dissemination is needed to play role in order to distribute and educate public in health care management and disease prevention. Since the knowledge dissemination in medical is important, there is a need to develop a knowledge based system that can emulate human intelligence to assist decision making process. Thereby, this study utilized hybrid artificial intelligence (AI) techniques to develop a Fuzzy Expert System for Diagnosing Heart Attack Disease (HAD). This system integrates fuzzy logic with expert system, which helps the medical practitioner and people to predict the risk and as well as diagnosing heart attack based on given symptom. The development of HAD is expected not only providing expert knowledge but potentially become one of learning resources to help citizens to develop awareness about heart-healthy lifestyle.

Introducing Managers to Expert Systems.

Science.gov (United States)

Finlay, Paul N.; And Others

1991-01-01

Describes a short course to expose managers to expert systems, consisting of (1) introductory lecture; (2) supervised computer tutorial; (3) lecture and discussion about knowledge structuring and modeling; and (4) small group work on a case study using computers. (SK)

Application of expert system in measurement instrument instrumentation's maintenance on a acquisition system

International Nuclear Information System (INIS)

Pinastiko, W.S.

1997-01-01

Expert system is a part of the artificial intelligence, a solution software for complicated problems, which solving the problems need experiences and knowledge. This paper discussed about the research's result, that is a design of expert system to help instrumentation's maintenance on a data acquisition system. By using application of expert system, the system can do health monitoring, automatic trouble trouble tracing ang gives advise toward the trouble. this instrumentation's maintenance system is a tool which has an analytic and inference ability toward th trouble. This smart system is a very useful tool to get a good data acquisition system quality. the model system also can be developed to be a specific application as a remote instrumentation's management system

Expert system support and juridical quality

NARCIS (Netherlands)

Groothuis, Marga M.; Svensson, Jorgen S.; Breuker, J.; Leenes, R.E.; Winkels, R.

2000-01-01

This article discusses the use of expert systems as a means of achieving juridical quality within administrative organisations. Do these systems really improve the quality of decision making and provide the desired guarantees with respect to the correct treatment of clients?

Fiber-wireless convergence in next-generation communication networks systems, architectures, and management

CERN Document Server

Chang, Gee-Kung; Ellinas, Georgios

2017-01-01

This book investigates new enabling technologies for Fi-Wi convergence. The editors discuss Fi-Wi technologies at the three major network levels involved in the path towards convergence: system level, network architecture level, and network management level. The main topics will be: a. At system level: Radio over Fiber (digitalized vs. analogic, standardization, E-band and beyond) and 5G wireless technologies; b. Network architecture level: NGPON, WDM-PON, BBU Hotelling, Cloud Radio Access Networks (C-RANs), HetNets. c. Network management level: SDN for convergence, Next-generation Point-of-Presence, Wi-Fi LTE Handover, Cooperative MultiPoint. • Addresses the Fi-Wi convergence issues at three different levels, namely at the system level, network architecture level, and network management level • Provides approaches in communication systems, network architecture, and management that are expected to steer the evolution towards fiber-wireless convergence • Contributions from leading experts in the field of...

System control module diagnostic Expert Assistant

Science.gov (United States)

Flores, Luis M.; Hansen, Roger F.

1990-01-01

The Orbiter EXperiments (OEX) Program was established by NASA's Office of Aeronautics and Space Technology (OAST) to accomplish the precise data collection necessary to support a complete and accurate assessment of Space Transportation System (STS) Orbiter performance during all phases of a mission. During a mission, data generated by the various experiments are conveyed to the OEX System Control Module (SCM) which arranges for and monitors storage of the data on the OEX tape recorder. The SCM Diagnostic Expert Assistant (DEA) is an expert system which provides on demand advice to technicians performing repairs of a malfunctioning SCM. The DEA is a self-contained, data-driven knowledge-based system written in the 'C' Language Production System (CLIPS) for a portable micro-computer of the IBM PC/XT class. The DEA reasons about SCM hardware faults at multiple levels; the most detailed layer of encoded knowledge of the SCM is a representation of individual components and layouts of the custom-designed component boards.

An expert system for improving nuclear emergency response

International Nuclear Information System (INIS)

Salame-Alfie, A.; Goldbogen, G.C.; Ryan, R.M.; Wallace, W.A.; Yeater, M.L.

1987-01-01

The accidents at TMI-2 and Chernobyl have produced initiatives aimed at improving nuclear plant emergency response capabilities. Among them are the development of emergency response facilities with capabilities for the acquisition, processing, and diagnosis of data which are needed to help coordinate plant operations, engineering support and management under emergency conditions. An effort in this direction prompted the development of an expert system. EP (EMERGENCY PLANNER) is a prototype expert system that is intended to help coordinate the overall management during emergency conditions. The EP system was built using the GEN-X expert system shell. GEN-X has a variety of knowledge representation mechanisms including AND/OR trees, Decision trees, and IF/THEN tables, and runs on an IBM PC-XT or AT computer or compatible. Among the main features, EP is portable, modular, user friendly, can interact with external programs and interrogate data bases. The knowledge base is made of New York State (NYS) Procedures for Emergency Classification, NYS Radiological Emergency Preparedness Plan (REPP) and knowledge from experts of the NYS Radiological Emergency Preparedness Group and the Office of Radiological Health and Chemistry of the New York Power Authority (NYPA)

Processes in construction of failure management expert systems from device design information

Science.gov (United States)

Malin, Jane T.; Lance, Nick

1987-01-01

This paper analyzes the tasks and problem solving methods used by an engineer in constructing a failure management expert system from design information about the device to te diagnosed. An expert test engineer developed a trouble-shooting expert system based on device design information and experience with similar devices, rather than on specific expert knowledge gained from operating the device or troubleshooting its failures. The construction of the expert system was intensively observed and analyzed. This paper characterizes the knowledge, tasks, methods, and design decisions involved in constructing this type of expert system, and makes recommendations concerning tools for aiding and automating construction of such systems.

Comparing the use of an online expert health network against common information sources to answer health questions.

Science.gov (United States)

Rhebergen, Martijn D F; Lenderink, Annet F; van Dijk, Frank J H; Hulshof, Carel T J

2012-02-02

Many workers have questions about occupational safety and health (OSH). It is unknown whether workers are able to find correct, evidence-based answers to OSH questions when they use common information sources, such as websites, or whether they would benefit from using an easily accessible, free-of-charge online network of OSH experts providing advice. To assess the rate of correct, evidence-based answers to OSH questions in a group of workers who used an online network of OSH experts (intervention group) compared with a group of workers who used common information sources (control group). In a quasi-experimental study, workers in the intervention and control groups were randomly offered 2 questions from a pool of 16 standardized OSH questions. Both questions were sent by mail to all participants, who had 3 weeks to answer them. The intervention group was instructed to use only the online network ArboAntwoord, a network of about 80 OSH experts, to solve the questions. The control group was instructed that they could use all information sources available to them. To assess answer correctness as the main study outcome, 16 standardized correct model answers were constructed with the help of reviewers who performed literature searches. Subsequently, the answers provided by all participants in the intervention (n = 94 answers) and control groups (n = 124 answers) were blinded and compared with the correct model answers on the degree of correctness. Of the 94 answers given by participants in the intervention group, 58 were correct (62%), compared with 24 of the 124 answers (19%) in the control group, who mainly used informational websites found via Google. The difference between the 2 groups was significant (rate difference = 43%, 95% confidence interval [CI] 30%-54%). Additional analysis showed that the rate of correct main conclusions of the answers was 85 of 94 answers (90%) in the intervention group and 75 of 124 answers (61%) in the control group (rate difference

WWW expert system on producer gas cleaning

Energy Technology Data Exchange (ETDEWEB)

Schouten, E.J.; Lammers, G.; Beenackers, A.A.C.M. [University of Groningen (Netherlands)

1999-07-01

The University of Groningen (RUG) has developed an expert system on cleaning of biomass producer gas. This work was carried out in close co-operation with the Biomass Technology Group B.V. (BTG) in Enschede, The Netherlands within the framework of the EC supported JOR3-CT95-0084 project. The expert system was developed as a tool for the designer-engineer of downstream gas cleaning equipment and consists of an information package and a flowsheet package. The packages are integrated in a client/server system. The flowsheeting package of the expert system has been designed for the evaluation of different gas cleaning methods. The system contains a number of possible gas cleaning devices such as: cyclone, fabric filter, ceramic filter, venturi scrubber and catalytic cracker. The user can select up to five cleaning steps in an arbitrary order for his specific gas cleaning problem. After specification of the required design parameters, the system calculates the main design characteristics of the cleaning device. The information package is a collection of HTML{sup TM} files. It contains a large amount of information, tips, experience data, literature references and hyperlinks to other interesting Internet sites. This information is arranged per cleaning device. (orig.)

Expert system verification and validation for nuclear power industry applications

International Nuclear Information System (INIS)

Naser, J.A.

1990-01-01

The potential for the use of expert systems in the nuclear power industry is widely recognized. The benefits of such systems include consistency of reasoning during off-normal situations when humans are under great stress, the reduction of times required to perform certain functions, the prevention of equipment failures through predictive diagnostics, and the retention of human expertise in performing specialized functions. The increased use of expert systems brings with it concerns about their reliability. Difficulties arising from software problems can affect plant safety, reliability, and availability. A joint project between EPRI and the US Nuclear Regulatory Commission is being initiated to develop a methodology for verification and validation of expert systems for nuclear power applications. This methodology will be tested on existing and developing expert systems. This effort will explore the applicability of conventional verification and validation methodologies to expert systems. The major area of concern will be certification of the knowledge base. This is expected to require new types of verification and validation techniques. A methodology for developing validation scenarios will also be studied

An Expert System for Diagnosing Eye Diseases using Forward Chaining Method

Science.gov (United States)

Munaiseche, C. P. C.; Kaparang, D. R.; Rompas, P. T. D.

2018-02-01

Expert System is a system that seeks to adopt human knowledge to the computer, so that the computer can solve problems which are usually done by experts. The purpose of medical expert system is to support the diagnosis process of physicians. It considers facts and symptoms to provide diagnosis. This implies that a medical expert system uses knowledge about diseases and facts about the patients to suggest diagnosis. The aim of this research is to design an expert system application for diagnosing eye diseases using forward chaining method and to figure out user acceptance to this application through usability testing. Eye is selected because it is one of the five senses which is very sensitive and important. The scope of the work is extended to 16 types of eye diseases with 41 symptoms of the disease, arranged in 16 rules. The computer programming language employed was the PHP programming language and MySQL as the Relational Database Management System (RDBMS). The results obtained showed that the expert system was able to successfully diagnose eye diseases corresponding to the selected symptoms entered as query and the system evaluation through usability testing showed the expert system for diagnosis eye diseases had very good rate of usability, which includes learnability, efficiency, memorability, errors, and satisfaction so that the system can be received in the operational environment.

A framework for building real-time expert systems

Science.gov (United States)

Lee, S. Daniel

1991-01-01

The Space Station Freedom is an example of complex systems that require both traditional and artificial intelligence (AI) real-time methodologies. It was mandated that Ada should be used for all new software development projects. The station also requires distributed processing. Catastrophic failures on the station can cause the transmission system to malfunction for a long period of time, during which ground-based expert systems cannot provide any assistance to the crisis situation on the station. This is even more critical for other NASA projects that would have longer transmission delays (e.g., the lunar base, Mars missions, etc.). To address these issues, a distributed agent architecture (DAA) is proposed that can support a variety of paradigms based on both traditional real-time computing and AI. The proposed testbed for DAA is an autonomous power expert (APEX) which is a real-time monitoring and diagnosis expert system for the electrical power distribution system of the space station.

[The application of the expert system in prosthedontics].

Science.gov (United States)

Lu, P; Li, G; Wang, Y

1996-11-01

In this study, we developed an expert system for designing of frame work of Removable Partial Denture by the method of Artificial Intelligence. Both of Quick Basic and Tuber C language are used in this program. This system consider more other relative factors in removable partial denture designing except the amount and position of missing teeth. Base the idea of multy-layer knowledge we divide the process RPD designing into different layers according to their logical relationships. So, this system could imitate better the expert of prosthedontics to do the clinical examination, diagnosis, treatment plan and denture designing. There are 11 modules in this system totally. They are used to accomplish the case register, first visit examination, treatment plan, abutment examination, denture designing, biomechanic analysis of abutment, reference, explanation and etc. We used this system for 20 partial edentulous patients and compared the results with the designing plans of expert of prosthedontics, the rate of conformity is 83.6%.

Guidelines for the verification and validation of expert system software and conventional software: Survey and documentation of expert system verification and validation methodologies. Volume 3

Energy Technology Data Exchange (ETDEWEB)

Groundwater, E.H.; Miller, L.A.; Mirsky, S.M. [Science Applications International Corp., McLean, VA (United States)

1995-03-01

This report is the third volume in the final report for the Expert System Verification and Validation (V&V) project which was jointly sponsored by the Nuclear Regulatory Commission and the Electric Power Research Institute. The ultimate objective is the formulation of guidelines for the V&V of expert systems for use in nuclear power applications. The purpose of this activity was to survey and document techniques presently in use for expert system V&V. The survey effort included an extensive telephone interviewing program, site visits, and a thorough bibliographic search and compilation. The major finding was that V&V of expert systems is not nearly as established or prevalent as V&V of conventional software systems. When V&V was used for expert systems, it was almost always at the system validation stage after full implementation and integration usually employing the non-systematic dynamic method of {open_quotes}ad hoc testing.{close_quotes} There were few examples of employing V&V in the early phases of development and only weak sporadic mention of the possibilities in the literature. There is, however, a very active research area concerning the development of methods and tools to detect problems with, particularly, rule-based expert systems. Four such static-testing methods were identified which were not discovered in a comprehensive review of conventional V&V methods in an earlier task.

Expert System Software Assistant for Payload Operations

Science.gov (United States)

Rogers, Mark N.

1997-01-01

The broad objective of this expert system software based application was to demonstrate the enhancements and cost savings that can be achieved through expert system software utilization in a spacecraft ground control center. Spacelab provided a valuable proving ground for this advanced software technology; a technology that will be exploited and expanded for future ISS operations. Our specific focus was on demonstrating payload cadre command and control efficiency improvements through the use of "smart" software which monitors flight telemetry, provides enhanced schematic-based data visualization, and performs advanced engineering data analysis.

An expert system for reward systems design.

OpenAIRE

Erturk, Alper

2000-01-01

Approved for public release; distribution is unlimited Today's business environment is a highly competitive marketplace. In this competition, organizations distribute numerous rewards to motivate, attract and retain employees, such as pay, fringe benefits and promotions. However, not all managers have the necessary knowledge and expertise to effectively decide and structure reward systems. This thesis presents an expert system to assist managers with designing the most appropriate reward s...

Computers start to think with expert systems

Energy Technology Data Exchange (ETDEWEB)

1983-03-21

A growing number of professionals-notably in oil and mineral exploration, plasma research, medicine, VLSI circuit design, drug design and robotics-are beginning to use computerised expert systems. A computer program uses knowledge and inference procedures to solve problems which are sufficiently difficult to require significant human expertise for their solution. The facts constitute a body of information that is widely shared, publicly available and generally agreed upon by experts in the field. The heuristics are mostly private, and little discussed, rules of good judgement (rules of plausible reasoning, rules of good guessing, etc.) that characterise expert-level decision making in the field.

Using hybrid expert system approaches for engineering applications

Science.gov (United States)

Allen, R. H.; Boarnet, M. G.; Culbert, C. J.; Savely, R. T.

1987-01-01

In this paper, the use of hybrid expert system shells and hybrid (i.e., algorithmic and heuristic) approaches for solving engineering problems is reported. Aspects of various engineering problem domains are reviewed for a number of examples with specific applications made to recently developed prototype expert systems. Based on this prototyping experience, critical evaluations of and comparisons between commercially available tools, and some research tools, in the United States and Australia, and their underlying problem-solving paradigms are made. Characteristics of the implementation tool and the engineering domain are compared and practical software engineering issues are discussed with respect to hybrid tools and approaches. Finally, guidelines are offered with the hope that expert system development will be less time consuming, more effective, and more cost-effective than it has been in the past.

A study on expert system applications for nuclear power plant

International Nuclear Information System (INIS)

Huh, Young Hwan; Kim, Kil Yoo; Kang, Soon Ju; Park, Nam Seok; Ryu, Chan Ho; Choi, In Seon; Chung, Young Moo; Chung, Tae Eon; Yim, Chang Jae; Lee, Yoon Sang.

1990-01-01

The objectives of this research are 1) to develop an expert system which can automatically evaluate eddy current (EC) signal during an eddy current test (ECT) of SG U tube inspection, 2) to build an effective data base management system for ECT data. By this expert system the reliability in EC signal evaluation can be improved, and the required man-power can be reduced. And this expert system can supply a stable ECT and contribute to a safe operation of the nuclear power plant. (author)

Advanced Visualization System for Monitoring the ATLAS TDAQ Network in real-time

CERN Document Server

Batraneanu, S M; The ATLAS collaboration; Martin, B; Savu, D O; Stancu, S N; Leahu, L

2012-01-01

The trigger and data acquisition (TDAQ) system of the ATLAS experiment at CERN comprises approximately 2500 servers interconnected by three separate Ethernet networks, totaling 250 switches. Due to its real-time nature, there are additional requirements in comparison to conventional networks in terms of speed and performance. A comprehensive monitoring framework has been developed for expert use. However, non experts may experience difficulties in using it and interpreting data. Moreover, specific performance issues, such as single component saturation or unbalanced workload, need to be spotted with ease, in real-time, and understood in the context of the full system view. We addressed these issues by developing an innovative visualization system where the users benefit from the advantages of 3D graphics to visualize the large monitoring parameter space associated with our system. This has been done by developing a hierarchical model of the complete system onto which we overlaid geographical, logical and real...

AN EXPERT SYSTEM FOR SUPPORTING THE PRODUCTION OF PLEASURE BOATS

Directory of Open Access Journals (Sweden)

Tomasz GONCIARZ

2013-07-01

Full Text Available Expert systems can be defined as computer programs, whose main task is to simulate a human expert, usually in a narrow field of expertise. Possible applications of modern information technology are very extensive, ranging from medicine, geology and technology to applications in the field of economic and financial decision support. The purpose of this paper is to present the practical application of an expert system that supports the process of managing the production of yachts and has a high suitability for use in this application. Using the expert system described in the paper reduces the time during the design and production preparation process.

The development of an expert system for arid rangeland ...

African Journals Online (AJOL)

Currently, the expert system uses wiki technology, as this allows a high level of interaction between user and administrator. The expert system includes embedded links to photographs and additional information. It allows easy updating of the knowledge base. An additional booklet was also developed, since access to ...

Techniques and implementation of the embedded rule-based expert system using Ada

Science.gov (United States)

Liberman, Eugene M.; Jones, Robert E.

1991-01-01

Ada is becoming an increasingly popular programming language for large Government-funded software projects. Ada with its portability, transportability, and maintainability lends itself well to today's complex programming environment. In addition, expert systems have also assured a growing role in providing human-like reasoning capability and expertise for computer systems. The integration of expert system technology with Ada programming language, specifically a rule-based expert system using an ART-Ada (Automated Reasoning Tool for Ada) system shell is discussed. The NASA Lewis Research Center was chosen as a beta test site for ART-Ada. The test was conducted by implementing the existing Autonomous Power EXpert System (APEX), a Lisp-base power expert system, in ART-Ada. Three components, the rule-based expert system, a graphics user interface, and communications software make up SMART-Ada (Systems fault Management with ART-Ada). The main objective, to conduct a beta test on the ART-Ada rule-based expert system shell, was achieved. The system is operational. New Ada tools will assist in future successful projects. ART-Ada is one such tool and is a viable alternative to the straight Ada code when an application requires a rule-based or knowledge-based approach.

Neural network expert system for X-ray analysis of welded joints

Science.gov (United States)

Kozlov, V. V.; Lapik, N. V.; Popova, N. V.

2018-03-01

The use of intelligent technologies for the automated analysis of product quality is one of the main trends in modern machine building. At the same time, rapid development in various spheres of human activity is experienced by methods associated with the use of artificial neural networks, as the basis for building automated intelligent diagnostic systems. Technologies of machine vision allow one to effectively detect the presence of certain regularities in the analyzed designation, including defects of welded joints according to radiography data.

Strategies for adding adaptive learning mechanisms to rule-based diagnostic expert systems

Science.gov (United States)

Stclair, D. C.; Sabharwal, C. L.; Bond, W. E.; Hacke, Keith

1988-01-01

Rule-based diagnostic expert systems can be used to perform many of the diagnostic chores necessary in today's complex space systems. These expert systems typically take a set of symptoms as input and produce diagnostic advice as output. The primary objective of such expert systems is to provide accurate and comprehensive advice which can be used to help return the space system in question to nominal operation. The development and maintenance of diagnostic expert systems is time and labor intensive since the services of both knowledge engineer(s) and domain expert(s) are required. The use of adaptive learning mechanisms to increment evaluate and refine rules promises to reduce both time and labor costs associated with such systems. This paper describes the basic adaptive learning mechanisms of strengthening, weakening, generalization, discrimination, and discovery. Next basic strategies are discussed for adding these learning mechanisms to rule-based diagnostic expert systems. These strategies support the incremental evaluation and refinement of rules in the knowledge base by comparing the set of advice given by the expert system (A) with the correct diagnosis (C). Techniques are described for selecting those rules in the in the knowledge base which should participate in adaptive learning. The strategies presented may be used with a wide variety of learning algorithms. Further, these strategies are applicable to a large number of rule-based diagnostic expert systems. They may be used to provide either immediate or deferred updating of the knowledge base.

Expert systems for space power supply: design, analysis, and evaluation

International Nuclear Information System (INIS)

Cooper, R.S.; Thomson, M.K.; Hoshor, A.

1987-01-01

The authors evaluated the feasibility of applying expert systems to the conceptual design, analysis, and evaluation of space power supplies in particular, and complex systems in general. To do this, they analyzed the space power supply design process and in associated knowledge base, and characterized them in a form suitable for computer emulation of a human expert. The existing expert system tools and the results achieved with them were evaluated to assess their applicability to power system design. They applied some new concepts for combining program architectures (modular expert systems and algorithms) with information about the domain to create a deep system for handling the complex design problem. They authors developed, programmed and tested NOVICE, a code to solve a simplified version of a scoping study of a wide variety of power supply types for a broad range of missions, as a concrete feasibility demonstration

Toward the efficient implementation of expert systems in Ada

Science.gov (United States)

Lee, S. Daniel

1990-01-01

Here, the authors describe Ada language issues encountered during the development of ART-Ada, an expert system tool for Ada deployment. ART-Ada is being used to implement several expert system applications for the Space Station Freedom and the U.S. Air Force. Additional information is given on dynamic memory allocation.

Nephrus: expert system model in intelligent multilayers for evaluation of urinary system based on scintigraphic image analysis

International Nuclear Information System (INIS)

Silva, Jorge Wagner Esteves da; Schirru, Roberto; Boasquevisque, Edson Mendes

1999-01-01

Renal function can be measured noninvasively with radionuclides in a extremely safe way compared to other diagnosis techniques. Nevertheless, due to the fact that radioactive materials are used in this procedure, it is necessary to maximize its benefits, therefore all efforts are justifiable in the development of data analysis support tools for this diagnosis modality. The objective of this work is to develop a prototype for a system model based on Artificial Intelligence devices able to perform functions related to cintilographic image analysis of the urinary system. Rules used by medical experts in the analysis of images obtained with 99m Tc+DTPA and /or 99m Tc+DMSA were modeled and a Neural Network diagnosis technique was implemented. Special attention was given for designing programs user-interface. Human Factor Engineering techniques were taking in account allowing friendliness and robustness. The image segmentation adopts a model based on Ideal ROIs, which represent the normal anatomic concept for urinary system organs. Results obtained using Artificial Neural Networks for qualitative image analysis and knowledge model constructed show the feasibility of Artificial Neural Networks for qualitative image analysis and knowledge model constructed show feasibility of Artificial Intelligence implementation that uses inherent abilities of each technique in the medical diagnosis image analysis. (author)

Guidelines for the verification and validation of expert system software and conventional software: Survey and documentation of expert system verification and validation methodologies. Volume 3

International Nuclear Information System (INIS)

Groundwater, E.H.; Miller, L.A.; Mirsky, S.M.

1995-03-01

This report is the third volume in the final report for the Expert System Verification and Validation (V ampersand V) project which was jointly sponsored by the Nuclear Regulatory Commission and the Electric Power Research Institute. The ultimate objective is the formulation of guidelines for the V ampersand V of expert systems for use in nuclear power applications. The purpose of this activity was to survey and document techniques presently in use for expert system V ampersand V. The survey effort included an extensive telephone interviewing program, site visits, and a thorough bibliographic search and compilation. The major finding was that V ampersand V of expert systems is not nearly as established or prevalent as V ampersand V of conventional software systems. When V ampersand V was used for expert systems, it was almost always at the system validation stage after full implementation and integration usually employing the non-systematic dynamic method of open-quotes ad hoc testing.close quotes There were few examples of employing V ampersand V in the early phases of development and only weak sporadic mention of the possibilities in the literature. There is, however, a very active research area concerning the development of methods and tools to detect problems with, particularly, rule-based expert systems. Four such static-testing methods were identified which were not discovered in a comprehensive review of conventional V ampersand V methods in an earlier task

Expert system for skin problem consultation in Thai traditional medicine.

Science.gov (United States)

Nopparatkiat, Pornchai; na Nagara, Byaporn; Chansa-ngavej, Chuvej

2014-01-01

This paper aimed to demonstrate the research and development of a rule-based expert system for skin problem consulting in the areas of acne, melasma, freckle, wrinkle, and uneven skin tone, with recommended treatments from Thai traditional medicine knowledge. The tool selected for developing the expert system is a software program written in the PHP language. MySQL database is used to work together with PHP for building database of the expert system. The system is web-based and can be reached from anywhere with Internet access. The developed expert system gave recommendations on the skin problem treatment with Thai herbal recipes and Thai herbal cosmetics based on 416 rules derived from primary and secondary sources. The system had been tested by 50 users consisting of dermatologists, Thai traditional medicine doctors, and general users. The developed system was considered good for learning and consultation. The present work showed how such a scattered body of traditional knowledge as Thai traditional medicine and herbal recipes could be collected, organised and made accessible to users and interested parties. The expert system developed herein should contribute in a meaningful way towards preserving the knowledge and helping promote the use of Thai traditional medicine as a practical alternative medicine for the treatment of illnesses.

Planning bioinformatics workflows using an expert system

Science.gov (United States)

Chen, Xiaoling; Chang, Jeffrey T.

2017-01-01

Abstract Motivation: Bioinformatic analyses are becoming formidably more complex due to the increasing number of steps required to process the data, as well as the proliferation of methods that can be used in each step. To alleviate this difficulty, pipelines are commonly employed. However, pipelines are typically implemented to automate a specific analysis, and thus are difficult to use for exploratory analyses requiring systematic changes to the software or parameters used. Results: To automate the development of pipelines, we have investigated expert systems. We created the Bioinformatics ExperT SYstem (BETSY) that includes a knowledge base where the capabilities of bioinformatics software is explicitly and formally encoded. BETSY is a backwards-chaining rule-based expert system comprised of a data model that can capture the richness of biological data, and an inference engine that reasons on the knowledge base to produce workflows. Currently, the knowledge base is populated with rules to analyze microarray and next generation sequencing data. We evaluated BETSY and found that it could generate workflows that reproduce and go beyond previously published bioinformatics results. Finally, a meta-investigation of the workflows generated from the knowledge base produced a quantitative measure of the technical burden imposed by each step of bioinformatics analyses, revealing the large number of steps devoted to the pre-processing of data. In sum, an expert system approach can facilitate exploratory bioinformatic analysis by automating the development of workflows, a task that requires significant domain expertise. Availability and Implementation: https://github.com/jefftc/changlab Contact: jeffrey.t.chang@uth.tmc.edu PMID:28052928

Application of expert system in library and information science: a review

International Nuclear Information System (INIS)

Bhatti, A.R.

1988-09-01

This study seeks to provide an overview of the current state of development in the application of expert system in technology in the field of library and information science. The study starts briefly looking into the capabilities of Artificial Intelligence (AI) in general and then its relevance to LIS (Library Information System) work. A basic introduction to expert system technology and outgrowth of AI research is given. The major components of a generalized expert system are discussed in some detail, and the ways in which system development can be approached are looked at. The main area of expert system applications in library and information science are discussed, looking at cataloguing, classification, reference work and library management etc. (author)

Are expert systems needed on the power exchange?

International Nuclear Information System (INIS)

Nilsson, David.

1991-09-01

The goal of this masters thesis is to investigate whether it is possible to improve the activities at the power production unit (PDP) at Sydkraft with the help of expert systems. Another goal is that the produced result should work as an education material for the production operators. Therefore the work contains a detailed description of the power exchange and the factors that influence it, in addition to a description of the work tasks of the operators. The conclusions are, first, that an embedded critiquing system would enable a quicker training of new operators, while also giving the more experienced operators feedback on their decisions. Secondly, the water storage operation should be documented, to create a basis for the development of an expert system, and to create more material for education. The thesis also suggests a new model for the development of expert systems in areas where it is not known whether such a solution is possible. (au)

Component aging evaluation with expert systems

International Nuclear Information System (INIS)

Wiesemann, J.S.; Maguire, H.T. Jr.

1988-01-01

The age degradation of components involves a complex relationship between a variety of variables. These relationships are typically modeled using probabilistic and deterministic analyses. These methods depend upon a formal understanding of the underlying degradation mechanisms and a database of experience which allows statistical analyses to extract numerical trends. At present, not all age degradation mechanisms are adequately modeled and available data for age degradation is in most cases insufficient. In addition, these methods tend to focus upon answers to isolated questions (e.g., What is the component failure rate?) rather than the more pertinent questions concerning operations and maintenance (e.g., should the component be replaced at the next outage). Fortunately, knowledge in the form of personal experience does exist which allows plant personnel to make decisions concerning operations and maintenance. This knowledge can be modeled using expert systems. This paper discusses CAGES (Component Aging Expert System). It combines expert rules (heuristics), probabilistic models, and deterministic models to make evaluations of component aging; predict the implications for component life extension, operational readiness, maintenance effectiveness, and safety, and make recommendations for maintenance and operation

Rule - based Fault Diagnosis Expert System for Wind Turbine

Directory of Open Access Journals (Sweden)

Deng Xiao-Wen

2017-01-01

Full Text Available Under the trend of increasing installed capacity of wind power, the intelligent fault diagnosis of wind turbine is of great significance to the safe and efficient operation of wind farms. Based on the knowledge of fault diagnosis of wind turbines, this paper builds expert system diagnostic knowledge base by using confidence production rules and expert system self-learning method. In Visual Studio 2013 platform, C # language is selected and ADO.NET technology is used to access the database. Development of Fault Diagnosis Expert System for Wind Turbine. The purpose of this paper is to realize on-line diagnosis of wind turbine fault through human-computer interaction, and to improve the diagnostic capability of the system through the continuous improvement of the knowledge base.

Spacecraft command and control using expert systems

Science.gov (United States)

Norcross, Scott; Grieser, William H.

1994-01-01

This paper describes a product called the Intelligent Mission Toolkit (IMT), which was created to meet the changing demands of the spacecraft command and control market. IMT is a command and control system built upon an expert system. Its primary functions are to send commands to the spacecraft and process telemetry data received from the spacecraft. It also controls the ground equipment used to support the system, such as encryption gear, and telemetry front-end equipment. Add-on modules allow IMT to control antennas and antenna interface equipment. The design philosophy for IMT is to utilize available commercial products wherever possible. IMT utilizes Gensym's G2 Real-time Expert System as the core of the system. G2 is responsible for overall system control, spacecraft commanding control, and spacecraft telemetry analysis and display. Other commercial products incorporated into IMT include the SYBASE relational database management system and Loral Test and Integration Systems' System 500 for telemetry front-end processing.

Temporal logics and real time expert systems.

Science.gov (United States)

Blom, J A

1996-10-01

This paper introduces temporal logics. Due to the eternal compromise between expressive adequacy and reasoning efficiency that must decided upon in any application, full (first order logic or modal logic based) temporal logics are frequently not suitable. This is especially true in real time expert systems, where a fixed (and usually small) response time must be guaranteed. One such expert system, Fagan's VM, is reviewed, and a delineation is given of how to formally describe and reason with time in medical protocols. It is shown that Petri net theory is a useful tool to check the correctness of formalised protocols.

Expert systems use in present and future CANDU nuclear power supply systems

International Nuclear Information System (INIS)

Lupton, L.R.; Basso, R.A.J.; Anderson, L.L.; Anderson, J.W.D.

1989-11-01

As CANDU nuclear power plants become more complex, and are operated under tighter constraints for longer periods between outages, plant operations staff will have to absorb more information to correctly and rapidly respond to upsets. A development program is underway at Atomic Energy of Canada Limited to use expert systems and interactive media tools to assist operations staff of existing and future CANDU plants. The complete system for plant information access and display, on-line advice and diagnosis, and interactive operating procedures is called the Operator Companion. A prototype, consisting of operator consoles, expert systems and simulation modules in a distributed architecture, is currently being developed to demonstrate the concepts of the Operator Companion. Specialized advisors are also being developed using expert system technology to meet specific operational and design needs

A Web-Based Rice Plant Expert System Using Rule-Based Reasoning

Directory of Open Access Journals (Sweden)

Anton Setiawan Honggowibowo

2009-12-01

Full Text Available Rice plants can be attacked by various kinds of diseases which are possible to be determined from their symptoms. However, it is to recognize that to find out the exact type of disease, an agricultural expert’s opinion is needed, meanwhile the numbers of agricultural experts are limited and there are too many problems to be solved at the same time. This makes a system with a capability as an expert is required. This system must contain the knowledge of the diseases and symptom of rice plants as an agricultural expert has to have. This research designs a web-based expert system using rule-based reasoning. The rule are modified from the method of forward chaining inference and backward chaining in order to to help farmers in the rice plant disease diagnosis. The web-based rice plants disease diagnosis expert system has the advantages to access and use easily. With web-based features inside, it is expected that the farmer can accesse the expert system everywhere to overcome the problem to diagnose rice diseases.

Focusing on the human factor in future expert systems

International Nuclear Information System (INIS)

Gordon, S.E.

1987-01-01

Technological advances in the area of artificial intelligence have produced expert systems that hold much promise for the design, operation, and maintenance of complex systems such as nuclear power plants. Such systems have been designed and implemented in a wide variety of task settings. In spite of the gains that have been made in the application of expert systems, there are still several difficult problems which have yet to be resolved. One of these problems is a frequently noted lack of user acceptance of newly fielded intelligent systems. This lack of acceptance can be attributed to a variety of factors, including unfamiliarity with computer technology, difficulty in adjusting to interface mechanisms, fear that the system was designed to replace the human operator, and a feeling that the human can perform the job better than the system. Some of the problems may be related to the fact that expert system design is essentially in it's infancy

Expert system for controlling plant growth in a contained environment

Science.gov (United States)

May, George A. (Inventor); Lanoue, Mark Allen (Inventor); Bethel, Matthew (Inventor); Ryan, Robert E. (Inventor)

2011-01-01

In a system for optimizing crop growth, vegetation is cultivated in a contained environment, such as a greenhouse, an underground cavern or other enclosed space. Imaging equipment is positioned within or about the contained environment, to acquire spatially distributed crop growth information, and environmental sensors are provided to acquire data regarding multiple environmental conditions that can affect crop development. Illumination within the contained environment, and the addition of essential nutrients and chemicals are in turn controlled in response to data acquired by the imaging apparatus and environmental sensors, by an "expert system" which is trained to analyze and evaluate crop conditions. The expert system controls the spatial and temporal lighting pattern within the contained area, and the timing and allocation of nutrients and chemicals to achieve optimized crop development. A user can access the "expert system" remotely, to assess activity within the growth chamber, and can override the "expert system".

Experiment with expert system guidance of an engineering analysis task

International Nuclear Information System (INIS)

Ransom, V.H.; Fink, R.K.; Callow, R.A.

1986-01-01

An experiment is being conducted in which expert systems are used to guide the performance of an engineering analysis task. The task chosen for experimentation is the application of a large thermal hydraulic transient simulation computer code. The expectation from this work is that the expert system will result in an improved analytical result with a reduction in the amount of human labor and expertise required. The code associated functions of model formulation, data input, code execution, and analysis of the computed output have all been identified as candidate tasks that could benefit from the use of expert systems. Expert system modules have been built for the model building and data input task. Initial results include the observation that human expectations of an intelligent environment rapidly escalate and structured or stylized tasks that are tolerated in the unaided system are frustrating within the intelligent environment

Expert System For Diagnosis Pest And Disease In Fruit Plants

Science.gov (United States)

Dewanto, Satrio; Lukas, Jonathan

2014-03-01

This paper discussed the development of an expert system to diagnose pests and diseases on fruit plants. Rule base method was used to store the knowledge from experts and literatures. Control technique using backward chain and started from the symptoms to get conclusions about the pests and diseases that occur. Development of the system has been performed using software Corvid Exsys developed by Exsys company. Results showed that the development of this expert system can be used to assist users in identifying the type of pests and diseases on fruit plants. Further development and possibility of using internet for this system are proposed.

An Expert System for the Development of Efficient Parallel Code

Science.gov (United States)

Jost, Gabriele; Chun, Robert; Jin, Hao-Qiang; Labarta, Jesus; Gimenez, Judit

2004-01-01

We have built the prototype of an expert system to assist the user in the development of efficient parallel code. The system was integrated into the parallel programming environment that is currently being developed at NASA Ames. The expert system interfaces to tools for automatic parallelization and performance analysis. It uses static program structure information and performance data in order to automatically determine causes of poor performance and to make suggestions for improvements. In this paper we give an overview of our programming environment, describe the prototype implementation of our expert system, and demonstrate its usefulness with several case studies.

Expert System dan Aplikasinya dalam Auditing: Suatu Metode Mempelajari Pertimbangan Materialitas

Directory of Open Access Journals (Sweden)

Erni Suryandari

2005-07-01

Full Text Available Expert system is an intellegence computer system that uses knowledge and inference procedures to solve quite a difficult problem which in unstructured in its nature. This purpose of this study is to discuss the benefit of expert system as an aid in decision making by auditors in auditing financial statement, especially when auditors are making audit planner. In making audit planner, expert system helps evaluate audit risk and judgment materiality. Judgment materiality planning will effect the nature, time and the extent of audit procedure. In the future, expert system will be a challenge to the accounting profession in order to get the benefit from the coming technology to improve performance and reduce cost.

Development of an expert system for radioactive material transportation

International Nuclear Information System (INIS)

Tamanoi, K.; Ishitobi, M.; Shinohara, Y.

1990-01-01

An expert system to deal with radioactive material transportation was developed. This expert system is based on 'Regulations for the Safe Transport of Radioactive Material' by IAEA issued 1985. IAEA published the regulations under such environments that safety transportation has become increasingly being focused as uses of radioactive materials are more pervasive, not only in nuclear field but also in non-nuclear purposes. Attentions are payed for operators and environment to establish safety in handling radioactive materials. In the 1985 regulations, detailed categorization of radioactive materials and, correspondingly, new classification of packages are introduced. This categorization is more complicated than old regulations, leading us to develop an expert system to evaluate easily the packages categorization. (author)

The Expert Project Management System (EPMS)

Science.gov (United States)

Silverman, Barry G.; Diakite, Coty

1986-01-01

Successful project managers (PMs) have been shown to rely on 'intuition,' experience, and analogical reasoning heuristics. For new PMs to be trained and experienced PMs to avoid repeating others' mistakes, it is necessary to make the knowledge and heuristics of successful PMs more widely available. The preparers have evolved a model of PM thought processes over the last decade that is now ready to be implemented as a generic PM aid. This aid consists of a series of 'specialist' expert systems (CRITIC, LIBRARIAN, IDEA MAN, CRAFTSMAN, and WRITER) that communicate with each other via a 'blackboard' architecture. The various specialist expert systems are driven to support PM training and problem solving since any 'answers' they pass to the blackboard are subjected to conflict identification (AGENDA FORMULATOR) and GOAL SETTER inference engines.

A living PSA based on use of expert systems

International Nuclear Information System (INIS)

Ancelin, C.; Bouissou, M.; Le, P.; De Saint-Quentin, S.; Villatte, N.

1989-01-01

This paper presents the expert systems that are developed by EDF in the framework of the French PSA. Aimed at automatically generating reliability models (fault trees, state graphs....), these expert systems are used for the reliability studies of safety systems in the Paluel nuclear power plant. Beyond the description of the implemented method, this paper insists on the new approach proposed to the reliability engineer, when using artificial intelligence techniques

An expert system for sensor data validation and malfunction detection

International Nuclear Information System (INIS)

Hashemi, S.; Hajek, B.K.; Miller, D.W.

1987-01-01

Nuclear power plant operation and monitoring in general is a complex task which requires a large number of sensors, alarms and displays. At any instant in time, the operator is required to make a judgment about the state of the plant and to react accordingly. During abnormal situations, operators are further burdened with time constraints. The possibility of an undetected faulty instrumentation line, adds to the complexity of operators' reasoning tasks. Recent work at The Ohio State University Laboratory of Artificial Intelligence Research (LAIR) and the nuclear engineering program has concentrated on the problem of diagnostic expert systems performance and their applicability to the nuclear power plant domain. The authors have also been concerned about the diagnostic expert systems performance when using potentially invalid sensor data. Because of this research, they have developed an expert system that can perform diagnostic problem solving despite the existence of some conflicting data in the domain. This work has resulted in enhancement of a programming tool, CSRL, that allows domain experts to create a diagnostic system that will be to some degree, tolerant of bad data while performing diagnosis. This expert system is described here

A unified plant information network

International Nuclear Information System (INIS)

Niederauer, G.F.

1986-01-01

Technology is bringing power plants fully into the age of computerization. Microcomputers, data base managers, networking, and friendly, expert software are principal technology factors. Monitoring will improve, and the number and power of computers is increasing. The huge information flow will cause computers to be integrated into a communication network. The total plant operating triangle includes process, engineering, and management systems. The total network will integrate all of these into a Total Unified Plant Information Network (TUPIN). Software will take the type of information beyond monitored data. Analysis will improve through direct access to logical, physical, and procedural models by end users. Information management will improve through widespread use of hierarchical, relational, and expert data base managers. Expert systems will aid in diagnostics and interpretation. The goal is to automate plant operations to enhance safety and performance and to reduce cost by making both the plants and the personnel more expert

IDEA system - a new computer-based expert system for incorporation monitoring

International Nuclear Information System (INIS)

Doerfel, H.

2007-01-01

Recently, at the Karlsruhe Research Centre, a computer-based expert system, Internal Dose Equivalent Assessment System (IDEA System), has been developed for assisting dosimetrists in applying the relevant recommendations and guidelines for internal dosimetry. The expert system gives guidance to the user with respect to: (a) planning of monitoring, (b) performing routine and special monitoring, and (c) evaluation of primary monitoring results. The evaluation is done according to the IDEA System guidelines (Doerfel, H. et al., General guidelines for the estimation of committed effective dose from incorporation monitoring data. Research Report FZKA 7243, Research Center Karlsruhe, Karlsruhe (2006). ISSN 0947-8260.) in a three-stage procedure according to the expected level of exposure. At the first level the evaluation is performed with default or site-specific parameter values, at the second level case-specific parameter values are applied and at the third level a special evaluation is performed with individual adjustment of model parameter values. With these well-defined procedures the expert system follows the aim, in which all recommendations and guidelines are applied properly and the results in terms of committed effective and organ doses are close to the best estimate. (author)

Operation and safety decision-making support expert system in NPP

International Nuclear Information System (INIS)

Wei Yanhui; Su Desong; Chen Weihua; Zhang Jianbo

2014-01-01

The article first reviewed three operation support systems currently used in NPP: real-time information surveillance system, important equipment surveillance system and plant process control and monitoring system, then presents the structure and function of three expert support sub-systems (intelligent alarm monitoring system, computer-based operating procedure support system, safety information expert decision support system). Finally the article discussed the meaning of a kind of operation decision making support system. (authors)

A Study on Satellite Diagnostic Expert Systems Using Case-Based Approach

Directory of Open Access Journals (Sweden)

Young-Tack Park

1997-06-01

Full Text Available Many research works are on going to monitor and diagnose diverse malfunctions of satellite systems as the complexity and number of satellites increase. Currently, many works on monitoring and diagnosis are carried out by human experts but there are needs to automate much of the routine works of them. Hence, it is necessary to study on using expert systems which can assist human experts routine work by doing automatically, thereby allow human experts devote their expertise more critical and important areas of monitoring and diagnosis. In this paper, we are employing artificial intelligence techniques to model human experts' knowledge and inference the constructed knowledge. Especially, case-based approaches are used to construct a knowledge base to model human expert capabilities which use previous typical exemplars. We have designed and implemented a prototype case-based system for diagnosing satellite malfunctions using cases. Our system remembers typical failure cases and diagnoses a current malfunction by indexing the case base. Diverse methods are used to build a more user friendly interface which allows human experts can build a knowledge base in as easy way.

A Fuzzy Rule-Based Expert System for Evaluating Intellectual Capital

Directory of Open Access Journals (Sweden)

Mohammad Hossein Fazel Zarandi

2012-01-01

Full Text Available A fuzzy rule-based expert system is developed for evaluating intellectual capital. A fuzzy linguistic approach assists managers to understand and evaluate the level of each intellectual capital item. The proposed fuzzy rule-based expert system applies fuzzy linguistic variables to express the level of qualitative evaluation and criteria of experts. Feasibility of the proposed model is demonstrated by the result of intellectual capital performance evaluation for a sample company.

Expert System Dan Aplikasinya Dalam Auditing: Suatu Metode Mempelajari Pertimbangan Materialitas

OpenAIRE

Suryandari, Erni

2001-01-01

Expert system is an intellegence computer system that uses knowledge and inference procedures to solve quite a difficult problem which in unstructured in its nature. This purpose of this study is to discuss the benefit of expert system as an aid in decision making by auditors in auditing financial statement, especially when auditors are making audit planner. In making audit planner, expert system helps evaluate audit risk and judgment materiality. Judgment materiality planning will effect the...

Expert System dan Aplikasinya dalam Auditing: Suatu Metode Mempelajari Pertimbangan Materialitas

OpenAIRE

Erni Suryandari

2005-01-01

Expert system is an intellegence computer system that uses knowledge and inference procedures to solve quite a difficult problem which in unstructured in its nature. This purpose of this study is to discuss the benefit of expert system as an aid in decision making by auditors in auditing financial statement, especially when auditors are making audit planner. In making audit planner, expert system helps evaluate audit risk and judgment materiality. Judgment materiality planning will effect the...

Towards a Fuzzy Expert System on Toxicological Data Quality Assessment.

Science.gov (United States)

Yang, Longzhi; Neagu, Daniel; Cronin, Mark T D; Hewitt, Mark; Enoch, Steven J; Madden, Judith C; Przybylak, Katarzyna

2013-01-01

Quality assessment (QA) requires high levels of domain-specific experience and knowledge. QA tasks for toxicological data are usually performed by human experts manually, although a number of quality evaluation schemes have been proposed in the literature. For instance, the most widely utilised Klimisch scheme1 defines four data quality categories in order to tag data instances with respect to their qualities; ToxRTool2 is an extension of the Klimisch approach aiming to increase the transparency and harmonisation of the approach. Note that the processes of QA in many other areas have been automatised by employing expert systems. Briefly, an expert system is a computer program that uses a knowledge base built upon human expertise, and an inference engine that mimics the reasoning processes of human experts to infer new statements from incoming data. In particular, expert systems have been extended to deal with the uncertainty of information by representing uncertain information (such as linguistic terms) as fuzzy sets under the framework of fuzzy set theory and performing inferences upon fuzzy sets according to fuzzy arithmetic. This paper presents an experimental fuzzy expert system for toxicological data QA which is developed on the basis of the Klimisch approach and the ToxRTool in an effort to illustrate the power of expert systems to toxicologists, and to examine if fuzzy expert systems are a viable solution for QA of toxicological data. Such direction still faces great difficulties due to the well-known common challenge of toxicological data QA that "five toxicologists may have six opinions". In the meantime, this challenge may offer an opportunity for expert systems because the construction and refinement of the knowledge base could be a converging process of different opinions which is of significant importance for regulatory policy making under the regulation of REACH, though a consensus may never be reached. Also, in order to facilitate the implementation

A study on the development and application of expert system for nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Woo, Hee Gon; Kim, Seong Bok [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center

1995-12-31

It is a final report of the research that is a study on the development and application of expert system for nuclear power plants and development of the schemes computing environments and user interfaces for the expert system, which is a systematic and efficient development of expert system for nuclear power plants in the future. This report is consisted of -Development trends of expert system for nuclear power plants. -Classification of expert system applications for nuclear power plants. -Systematic and efficient developments schemes of expert system for nuclear power plants, and -Suitable computing environments and user interfaces for the expert systems. (author). 113 refs., 85 figs.

A study on the development and application of expert system for nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Woo, Hee Gon; Kim, Seong Bok [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center

1996-12-31

It is a final report of the research that is a study on the development and application of expert system for nuclear power plants and development of the schemes computing environments and user interfaces for the expert system, which is a systematic and efficient development of expert system for nuclear power plants in the future. This report is consisted of -Development trends of expert system for nuclear power plants. -Classification of expert system applications for nuclear power plants. -Systematic and efficient developments schemes of expert system for nuclear power plants, and -Suitable computing environments and user interfaces for the expert systems. (author). 113 refs., 85 figs.

RISK REDUCTION WITH A FUZZY EXPERT EXPLORATION TOOL

Energy Technology Data Exchange (ETDEWEB)

William W. Weiss

2000-06-30

Incomplete or sparse information on geologic or formation characteristics introduces a high level of risk for oil exploration and development projects. Expert systems have been developed and used in several disciplines and industries, including medical diagnostics, with favorable results. A state-of-the-art exploration ''expert'' tool, relying on a computerized data base and computer maps generated by neural networks, is proposed through the use of ''fuzzy'' logic, a relatively new mathematical treatment of imprecise or non-explicit parameters and values. This project will develop an Artificial Intelligence system that will draw upon a wide variety of information to provide realistic estimates of risk. ''Fuzzy logic,'' a system of integrating large amounts of inexact, incomplete information with modern computational methods to derive usable conclusions, has been demonstrated as a cost-effective computational technology in many industrial applications. During project year 1, 90% of geologic, geophysical, production and price data were assimilated for installation into the database. Logs provided geologic data consisting of formation tops of the Brushy Canyon, Lower Brushy Canyon, and Bone Springs zones of 700 wells used to construct regional cross sections. Regional structure and isopach maps were constructed using kriging to interpolate between the measured points. One of the structure derivative maps (azimuth of curvature) visually correlates with Brushy Canyon fields on the maximum change contours. Derivatives of the regional geophysical data also visually correlate with the location of the fields. The azimuth of maximum dip approximately locates fields on the maximum change contours. In a similar manner the second derivative in the x-direction of the gravity map visually correlates with the alignment of the known fields. The visual correlations strongly suggest that neural network architectures will be

An exploration study to find important factors influencing on expert systems

Directory of Open Access Journals (Sweden)

Naser Azad

2013-09-01

Full Text Available Knowledge management plays an important role in modern management systems since many existing systems move towards learning organizations. Expert systems, on the other hand, are considered as the most popular techniques for adapting recent developments on knowledge management. This paper presents an empirical investigation to find important factors influencing adaptation of expert systems. The proposed study designs a questionnaire in Likert scale consists of 25 questions, distributes it among 258 people who have recently graduated from computer science and they are familiar with implementation of expert systems. Cronbach alpha is calculated as 0.730 and Kaiser-Meyer-Olkin Measure of Sampling Adequacy and Approx. Chi-Square are 0.748 and 1377.397, respectively. The study has implemented principal component analysis and the results have indicated that there were four factors influencing expert systems including systems management, intelligence systems, system analysis and specialized analysis.

Expert systems as applied to bridges and pavements : an overview.

Science.gov (United States)

1986-01-01

Expert systems is a rapidly emerging new application of computers to aid decision makers in solving problems. This report gives an overview of what expert systems are and of what use they may be to a transportation department. The focus of the applic...

An expert system framework for nondestructive waste assay

International Nuclear Information System (INIS)

Becker, G.K.

1996-01-01

Management and disposition of transuranic (RU) waste forms necessitates determining entrained RU and associated radioactive material quantities as per National RU Waste Characterization Program requirements. Technical justification and demonstration of a given NDA method used to determine RU mass and uncertainty in accordance with program quality assurance is difficult for many waste forms. Difficulties are typically founded in waste NDA methods that employ standards compensation and/or employment of simplifying assumptions on waste form configurations. Capability to determine and justify RU mass and mass uncertainty can be enhanced through integration of waste container data/information using expert system and empirical data-driven techniques with conventional data acquisition and analysis. Presented is a preliminary expert system framework that integrates the waste form data base, alogrithmic techniques, statistical analyses, expert domain knowledge bases, and empirical artificial intelligence modules into a cohesive system. The framework design and bases in addition to module development activities are discussed

A Formal Definition for Expert Systems used in Real-time Applications

Directory of Open Access Journals (Sweden)

Vasile MAZILESCU

2015-05-01

Full Text Available The present paper is situated on the grounds of research in the field of symbolic Artificial Intelligence systems, applied to the new Knowledge Management Systems. The basic feature of these systems is represented by the processing of the fuzzy knowledge involved in the synthesis of some decisions. The work reported in this paper serves to promote an Intelligent System that can operate in dynamic and uncertain environments based on a formal definition of an expert system. We can develop and justify thus a series of modelling and design techniques for Intelligent Knowledge Management Systems (IKMS, as well as methods for the analysis of expert systems performance, and, of a fuzzy expert system in particular, between which there are strong similarities. We will also outline a number of differences between conventional problem solving systems and IKMS, the links between expert systems and those of structural and functional planning, the analogy between the model of the problem or business process and the problem domain.

A systemic method for evaluating the potential impacts of floods on network infrastructures

Directory of Open Access Journals (Sweden)

J. Eleutério

2013-04-01

Full Text Available Understanding network infrastructures and their operation under exceptional circumstances is fundamental for dealing with flood risks and improving the resilience of a territory. This work presents a method for evaluating potential network infrastructure dysfunctions and damage in cases of flooding. In contrast to existing approaches, this method analyses network infrastructures on an elementary scale, by considering networks as a group of elements with specific functions and individual vulnerabilities. Our analysis places assets at the centre of the evaluation process, resulting in the construction of damage-dysfunction matrices based on expert interviews. These matrices permit summarising the different vulnerabilities of network infrastructures, describing how the different components are linked to each other and how they can disrupt the operation of the network. They also identify the actions and resources needed to restore the system to operational status following damage and dysfunctions, an essential point when dealing with the question of resilience. The method promotes multi-network analyses and is illustrated by a French case study. Sixty network experts were interviewed during the analysis of the following networks: drinking water supply, waste water, public lighting, gas distribution and electricity supply.

Developing a Web-Based Advisory Expert System for Implementing Traffic Calming Strategies

Directory of Open Access Journals (Sweden)

Amir Falamarzi

2014-01-01

Full Text Available Lack of traffic safety has become a serious issue in residential areas. In this paper, a web-based advisory expert system for the purpose of applying traffic calming strategies on residential streets is described because there currently lacks a structured framework for the implementation of such strategies. Developing an expert system can assist and advise engineers for dealing with traffic safety problems. This expert system is developed to fill the gap between the traffic safety experts and people who seek to employ traffic calming strategies including decision makers, engineers, and students. In order to build the expert system, examining sources related to traffic calming studies as well as interviewing with domain experts have been carried out. The system includes above 150 rules and 200 images for different types of measures. The system has three main functions including classifying traffic calming measures, prioritizing traffic calming strategies, and presenting solutions for different traffic safety problems. Verifying, validating processes, and comparing the system with similar works have shown that the system is consistent and acceptable for practical uses. Finally, some recommendations for improving the system are presented.

Expert system validation in prolog

Science.gov (United States)

Stock, Todd; Stachowitz, Rolf; Chang, Chin-Liang; Combs, Jacqueline

1988-01-01

An overview of the Expert System Validation Assistant (EVA) is being implemented in Prolog at the Lockheed AI Center. Prolog was chosen to facilitate rapid prototyping of the structure and logic checkers and since February 1987, we have implemented code to check for irrelevance, subsumption, duplication, deadends, unreachability, and cycles. The architecture chosen is extremely flexible and expansible, yet concise and complementary with the normal interactive style of Prolog. The foundation of the system is in the connection graph representation. Rules and facts are modeled as nodes in the graph and arcs indicate common patterns between rules. The basic activity of the validation system is then a traversal of the connection graph, searching for various patterns the system recognizes as erroneous. To aid in specifying these patterns, a metalanguage is developed, providing the user with the basic facilities required to reason about the expert system. Using the metalanguage, the user can, for example, give the Prolog inference engine the goal of finding inconsistent conclusions among the rules, and Prolog will search the graph intantiations which can match the definition of inconsistency. Examples of code for some of the checkers are provided and the algorithms explained. Technical highlights include automatic construction of a connection graph, demonstration of the use of metalanguage, the A* algorithm modified to detect all unique cycles, general-purpose stacks in Prolog, and a general-purpose database browser with pattern completion.

An Architectural Modelfor Intelligent Network Management

Institute of Scientific and Technical Information of China (English)

罗军舟; 顾冠群; 费翔

2000-01-01

Traditional network management approach involves the management of each vendor's equipment and network segment in isolation through its own proprietary element management system. It is necessary to set up a new network management architecture that calls for operation consolidation across vendor and technology boundaries. In this paper, an architectural model for Intelligent Network Management (INM) is presented. The INM system includes a manager system, which controls all subsystems and coordinates different management tasks; an expert system, which is responsible for handling particularly difficult problems, and intelligent agents, which bring the management closer to applications and user requirements by spreading intelligent agents through network segments or domain. In the expert system model proposed, especially an intelligent fault management system is given.The architectural model is to build the INM system to meet the need of managing modern network systems.

Expert system strategies for the diagnostic in a particle physics experiment

International Nuclear Information System (INIS)

D'Antone, I.; Mandrioli, G.; Matteuzzi, P.

1990-01-01

The maintenance of a particle detector functionality requires the knowledge of more experts: physicists and engineers for the detector and the electronic system. The integration of different knowledges and experiences can be easily done using an Expert System. A real-time Expert System allows us to diagnose the detector and data acquisition system anomalies; it makes an on-line diagnosis and, if an abnormal condition is identified, takes the appropriate action to reduce the unavailability of the apparatus. A method based on structural and behavioral reasoning is considered. Reasoning on the structure and on the functionality of the apparatus all the possible failures that can explain the sensor readings are searched. The behaviour of the apparatus components are described in qualitative terms to write the rules for the expert system

Application of expert system to evaluating reactor water cleanup system performance

International Nuclear Information System (INIS)

Maeda, Katsuji; Nakamura, Masahiro; Nagasawa, Katsumi; Fushiki, Sumiyuki.

1991-01-01

Expert systems employing artificial intelligence (AI) have been developed for finding and elucidating causes of anomalies and malfunctions, presenting pertinent recommendation for countermeasures and for making precautionary diagnosis. On the other hand, further improvements in reliabilities for chemical control are required to promote BWR plant reliability and advancement. Especially, it is necessary to maintain the reactor water purity in high quality to minimize stress corrosion cracking (SCC) in primary cooling system, fuel performance degradation and radiation buildup. The reactor water quality is controlled by the reactor water cleanup (RWCU) system. So, it is very important to maintain the RWCU performance, in order to keep good reactor water quality. This paper describes an expert system used for evaluating RWCU system performance in BWR plants. (author)

ROSIE: A Programming Environment for Expert Systems

Science.gov (United States)

1985-10-01

ence on Artificial Inteligence , Tbilisi, USSR, 1975. Fain, J., D. Gorlin, F. Hayes-Roth, S. Rosenschein, H. Sowizral, and D. Waterman, The ROSIE Language...gramming environment for artificial intelligence (AI) applications. It provides particular support for designing expert systems, systems that embody

Development of an accident management expert system for containment assessment

International Nuclear Information System (INIS)

Nelson, W.R.; Sebo, D.E.; Haney, L.N.

1987-01-01

The United States Nuclear Regulatory Commission (USNRSC) is sponsoring a program at the Idaho National Engineering Laboratory (INEL) to develop an accident management expert system. The intended users of the system are the personnel of the NRC Operations Center in Washington, D.C. The expert system will be used to help NRC personnel monitor and evaluate the status and management of the containment during a severe reactor accident. The knowledge base will include severe accident knowledge regarding the maintenance of the critical safety functions, especially containment integrity, during an accident. This paper summarizes the concepts that have been developed for the accident management expert system, and the plans that have been developed for its implementation

Embedded expert system for space shuttle main engine maintenance

Science.gov (United States)

Pooley, J.; Thompson, W.; Homsley, T.; Teoh, W.; Jones, J.; Lewallen, P.

1987-01-01

The SPARTA Embedded Expert System (SEES) is an intelligent health monitoring system that directs analysis by placing confidence factors on possible engine status and then recommends a course of action to an engineer or engine controller. The technique can prevent catastropic failures or costly rocket engine down time because of false alarms. Further, the SEES has potential as an on-board flight monitor for reusable rocket engine systems. The SEES methodology synergistically integrates vibration analysis, pattern recognition and communications theory techniques with an artificial intelligence technique - the Embedded Expert System (EES).

The development of the intelligent diagnostic expert system for high power dye-laser MOPA system

International Nuclear Information System (INIS)

Liu Lianhua; Yang Wenxi; Zhang Xiaowei; Dan Yongjun

2014-01-01

A intelligent diagnostic expert system was required to simulate the expert thinking process of solving problem in experiment and to real-time judge the running state of the experiment system. The intelligent diagnostic expert system for dye-laser MOPA system was build with the modular design of separated knowledge base and inference engine, the RETE algorithm rules match, the asynchronous operation, and multithreading technology. The experiment result indicated that the system could real-time analysis and diagnose the running state of dye-laser MOPA system with advantages of high diagnosis efficiency, good instantaneity and strong expansibility. (authors)

ESCAP/POPIN Expert Working Group on Development of Population Information Centres and Networks, 20-23 June 1984, Bangkok, Thailand.

Science.gov (United States)

1984-07-01

An overview of current population information programs at the regional, national, and global level was presented at a meeting of the Expert Working Group on Development of Population Information Centres and Networks. On the global level, the decentralized Population Information Network (POPIN) was established, consisting of population libraries, clearinghouses, information systems, and documentation centers. The Economic and Social Commission for Asia and the Pacific (ESCAP) Regional Population Information Centre (PIC) has actively promoted the standardization of methodologies for the collection and processing of data, the use of compatible terminology, adoption of classification systems, computer-assisted data and information handling, and improved programs of publication and infomration dissemination, within and among national centers. Among the national PICs, 83% are attached to the primary national family planning/fertility control unit and 17% are attached to demographic data, research, and analysis units. Lack of access to specialized information handling equipment such as microcomputers, word processors, and computer terminals remains a problem for PICs. Recommendations were made by the Expert Working Group to improve the functions of PICs: 1) the mandate and resoponsibilities of the PIC should be explicilty stated; 2) PICs should collect, process, and disseminate population information in the most effective format to workers in the population feild; 3) PICs should be given flexibility in the performance of activitites by their governing bodies; 4) short-term training should be provided in computerization and dissemination of information; 5) research and evaluation mechanisms for PIC activities should be developed; 6) PIC staff should prepare policy briefs for decision makers; 7) access to parent organizations should be given to nongovernment PICs; 8) study tours to foreign PICs should be organized for PIC staff; and 9) on-the-job training in indexing and

Use of neural networks in the analysis of complex systems

International Nuclear Information System (INIS)

Uhrig, R.E.

1992-01-01

The application of neural networks, alone or in conjunction with other advanced technologies (expert systems, fuzzy logic, and/or genetic algorithms) to some of the problems of complex engineering systems has the potential to enhance the safety reliability and operability of these systems. The work described here deals with complex systems or parts of such systems that can be isolated from the total system. Typically, the measured variables from the systems are analog variables that must be sampled and normalized to expected peak values before they are introduced into neural networks. Often data must be processed to put it into a form more acceptable to the neural network. The neural networks are usually simulated on modern high-speed computers that carry out the calculations serially. However, it is possible to implement neural networks using specially designed microchips where the network calculations are truly carried out in parallel, thereby providing virtually instantaneous outputs for each set of inputs. Specific applications described include: Diagnostics: State of the Plant; Hybrid System for Transient Identification; Detection of Change of Mode in Complex Systems; Sensor Validation; Plant-Wide Monitoring; Monitoring of Performance and Efficiency; and Analysis of Vibrations. Although the specific examples described deal with nuclear power plants or their subsystems, the techniques described can be applied to a wide variety of complex engineering systems

The development of an expert system for the characterization of waste assay data

Energy Technology Data Exchange (ETDEWEB)

Bridges, S.; Hodges, J.; Sparrow, C. [Mississippi State Univ., Mississippi State, MS (United States)] [and others

1997-11-01

Containers of transuranic and low-level alpha contaminated waste generated as a byproduct of Department of Energy defense-related programs must be characterized before their proper disposition can be determined. Nondestructive assay methods are the most desirable means for assessing the mass and activity of the entrained transuranic radionuclides. However, there are other sources of information that may be useful in the characterization of the entrained waste (e.g., container manifests, information about the generation process, and destructive assay techniques performed on representative samples). This paper describes initial work on an expert system being developed to analyze and characterize containerized radiological waste. This system is being developed by scientists at the Mississippi State University Diagnostic and Instrumentation Laboratory (DIAL) in collaboration with scientists at the Idaho National Engineering Laboratory. The DIAL scientists are responsible for (1) the development of techniques to represent and reason with evidence from a variety of sources, and (2) the development of appropriate method(s) to represent and reason with confidence levels associated with that evidence. This paper describes exploratory versions of the expert system developed to evaluate four techniques for representing and reasoning with the confidence in the evidence: MYCIN-style certainty factors, Dempster-Shafer Theory, Bayesian networks, and fuzzy logic. 16 refs., 8 figs., 4 tabs.

The development of an expert system for the characterization of waste assay data

International Nuclear Information System (INIS)

Bridges, S.; Hodges, J.; Sparrow, C.

1997-01-01

Containers of transuranic and low-level alpha contaminated waste generated as a byproduct of Department of Energy defense-related programs must be characterized before their proper disposition can be determined. Nondestructive assay methods are the most desirable means for assessing the mass and activity of the entrained transuranic radionuclides. However, there are other sources of information that may be useful in the characterization of the entrained waste (e.g., container manifests, information about the generation process, and destructive assay techniques performed on representative samples). This paper describes initial work on an expert system being developed to analyze and characterize containerized radiological waste. This system is being developed by scientists at the Mississippi State University Diagnostic and Instrumentation Laboratory (DIAL) in collaboration with scientists at the Idaho National Engineering Laboratory. The DIAL scientists are responsible for (1) the development of techniques to represent and reason with evidence from a variety of sources, and (2) the development of appropriate method(s) to represent and reason with confidence levels associated with that evidence. This paper describes exploratory versions of the expert system developed to evaluate four techniques for representing and reasoning with the confidence in the evidence: MYCIN-style certainty factors, Dempster-Shafer Theory, Bayesian networks, and fuzzy logic. 16 refs., 8 figs., 4 tabs

The Expert System Application For Inspection Of The Power Plants

International Nuclear Information System (INIS)

Josowidagdo, L.

1997-01-01

This paper describes the application of expert system to evaluate and consider the problem encountered in this fields are complex and time consuming. As as example several factors affecting system voltage selections are load magnitude, distance from the main power supply, safety, standards, cost of utilization and service system equipment, and future load growth. The inspection deal with interactions between alternatives, uncertainties, and important non financial parameter. Several complex problems are multiple objective functions, multiple constraints, complex system interactions, the need for accuracy, the need for trade off, optimization, and coordination of the decision making process. ASDEP is one of the expert system for electric power plant design that describe the application of the artificial intelligence to design of a power plan's electrical auxiliary system. In this circumstance this paper will elaborate another aspect for using the expert system in the inspection

3D images and expert system

International Nuclear Information System (INIS)

Hasegawa, Jun-ichi

1998-01-01

This paper presents an expert system called 3D-IMPRESS for supporting applications of three dimensional (3D) image processing. This system can automatically construct a 3D image processing procedure based on a pictorial example of the goal given by a user. In the paper, to evaluate the performance of the system, it was applied to construction of procedures for extracting specific component figures from practical chest X-ray CT images. (author)

Experts' views regarding Australian school-leavers' knowledge of nutrition and food systems.

Science.gov (United States)

Sadegholvad, Sanaz; Yeatman, Heather; Parrish, Anne-Maree; Worsley, Anthony

2017-10-01

To explore Australian experts' views regarding strengths and gaps in school-leavers' knowledge of nutrition and food systems ( N&FS) and factors that influence that knowledge. Semi-structured interviews were conducted with 21 highly experienced food-related experts in Australia. Qualitative data were analysed thematically using Attride-Stirling's thematic network framework. Two global themes and several organising themes were identified. The first global theme, 'structural curriculum-based problems', emerged from three organising themes of: inconsistencies in provided food education programs at schools in Australia; insufficient coverage of food-related skills and food systems topics in school curricula; and the lack of trained school teachers. The second global theme, 'insufficient levels of school-leavers knowledge of N&FS ', was generated from four organising themes, which together described Australian school-leavers' poor knowledge of N&FS more broadly and knowledge translation problem for everyday practices. Study findings identified key problems relating to current school-based N&FS education programs in Australia and reported knowledge gaps in relation to N&FS among Australian school-leavers. These findings provide important guidance for N&FS curriculum development, to clearly articulate broadly-based N&FS knowledge acquisition in curriculum policy and education documents for Australian schools. © 2017 The Authors.

A/C Interface: Expert Systems: Part II.

Science.gov (United States)

Dessy, Raymond E., Ed.

1984-01-01

Discusses working implementations of artificial intelligence systems for chemical laboratory applications. They include expert systems for liquid chromatography, spectral analysis, instrument control of a totally computerized triple-quadrupole mass spectrometer, and the determination of the mineral constituents of a rock sample given the powder…

Fuzzy expert systems using CLIPS

Science.gov (United States)

Le, Thach C.

1994-01-01

This paper describes a CLIPS-based fuzzy expert system development environment called FCLIPS and illustrates its application to the simulated cart-pole balancing problem. FCLIPS is a straightforward extension of CLIPS without any alteration to the CLIPS internal structures. It makes use of the object-oriented and module features in CLIPS version 6.0 for the implementation of fuzzy logic concepts. Systems of varying degrees of mixed Boolean and fuzzy rules can be implemented in CLIPS. Design and implementation issues of FCLIPS will also be discussed.

The Design and Implementation of an Intelligent Apparel Recommend Expert System

Directory of Open Access Journals (Sweden)

A. H. Dong

2013-01-01

Full Text Available Now with the rapid development of information science and technology, intelligent apparel recommend has drawn wide attention in apparel retail industry. Intelligent management and effective recommend are two issues of crucial importance for the retail store to enhance its corporate influence and increase its economic benefits. This paper proposes an intelligent recommend system design scheme for apparel retail which is based on expert system. By comprehensive utilization of database management and expert system technology, the proposed system provides a solid solution in improving the customer shopping experience. This paper presents a kind of object-oriented blackboard structure, which is applied in the apparel recommend expert system and establishes expert rule on the basis of apparel characteristic elements. Through the establishment of the rule base, the system generates personal recommend list by positive rule reasoning mechanism engine. The proposed method thus gives dress collocation scheme for the customer through the human-machine interaction from the point of view of the apparel experts. This design scheme avails the customers to experience targeted service with intellectualization, and personalization and it has certain reference significance for promoting apparel retail intelligence development.

A knowledge based expert system for propellant system monitoring at the Kennedy Space Center

Science.gov (United States)

Jamieson, J. R.; Delaune, C.; Scarl, E.

1985-01-01

The Lox Expert System (LES) is the first attempt to build a realtime expert system capable of simulating the thought processes of NASA system engineers, with regard to fluids systems analysis and troubleshooting. An overview of the hardware and software describes the techniques used, and possible applications to other process control systems. LES is now in the advanced development stage, with a full implementation planned for late 1985.

Expert systems for the transportation of hazardous and radioactive materials

International Nuclear Information System (INIS)

Luce, C.E.; Clover, J.C.; Ferrada, J.J.

1994-01-01

Under the supervision of the Transportation Technologies Group which is in the Chemical Technology Division at Oak Ridge National Laboratory, an expert system prototype for the transportation and packaging of hazardous and radioactive materials has been designed and developed. The development of the expert system prototype focused on using the combination of hypermedia elements and the Visual Basic trademark programming language. Hypermedia technology uses software that allows the user to interact with the computing environment through many formats: text, graphics, audio, and full-motion video. With the use of hypermedia, a user-friendly prototype has been developed to sort through numerous transportation regulations, thereby leading to the proper packaging for the materials. The expert system performs the analysis of regulations that an expert in shipping information would do; only the expert system performs the work more quickly. Currently, enhancements in a variety of categories are being made to the prototype. These include further expansion of non-radioactive materials, which includes any material that is hazardous but not radioactive; and the addition of full-motion video, which will depict regulations in terms that are easy to understand and which will show examples of how to handle the materials when packaging them

An expert system based software sizing tool, phase 2

Science.gov (United States)

Friedlander, David

1990-01-01

A software tool was developed for predicting the size of a future computer program at an early stage in its development. The system is intended to enable a user who is not expert in Software Engineering to estimate software size in lines of source code with an accuracy similar to that of an expert, based on the program's functional specifications. The project was planned as a knowledge based system with a field prototype as the goal of Phase 2 and a commercial system planned for Phase 3. The researchers used techniques from Artificial Intelligence and knowledge from human experts and existing software from NASA's COSMIC database. They devised a classification scheme for the software specifications, and a small set of generic software components that represent complexity and apply to large classes of programs. The specifications are converted to generic components by a set of rules and the generic components are input to a nonlinear sizing function which makes the final prediction. The system developed for this project predicted code sizes from the database with a bias factor of 1.06 and a fluctuation factor of 1.77, an accuracy similar to that of human experts but without their significant optimistic bias.

Expert system applications to nuclear plant for enhancement of productivity and performance

International Nuclear Information System (INIS)

Sun, B.; Cain, D.; Naser, J.; Colley, R.; Hirota, N.

1988-01-01

Expert systems, a major essence of the artificial intelligence (AI) technology, are referred to as computer software and hardware systems which are designed to capture and emulate the knowledge, reasoning, judgment, and to store the expertise of humans. Two parallel efforts are being performed at the Electric Power Research Institute (EPRI) to help the electric utility industry take advantage of the expert system technology. The first effort is the development of expert system building tools which are tailored to electric utility industry applications. The second effort is the development of expert system application prototypes. These two efforts complement each other. The application development tests the tools and identifies additional tool capabilities which are required. The tool development helps define the applications which can be successfully developed. This paper summarizes a number of research projects which are being performed at EPRI in both the areas of expert system building tool development and expert system applications to operations and maintenance. The AI technology as demonstrated by the development is being established as a credible technological tool for the electric utility industry. A challenge to transferring the expert systems technology to the utility industry is to gain utility users' acceptance of this modern information technology. To achieve successful technology transfer, the technology developers need to (1) understand the problems which can be addressed successfully using AI technology, (2) involve with users throughout the development and testing phases, and (3) demonstrate the benefits of the technology by the users

The use of Fuzzy expert system in robots decision-making

International Nuclear Information System (INIS)

Jamaseb, Mehdi; Jafari, Shahram; Montaseri, Farshid; Dadgar, Masoud

2014-01-01

The main issue that is investigated in this paper, is a method for decision making of mobile robots in different conditions for this purpose, we have used expert system. In this way, that the conditions of the robot are analyzed by on expert person a special issue (like following a ball) using knowledge base and suitable decisions will be mode. Then, using this information fuzzy rules well be built, and using its rules, robots decisions can be implemented like an expert person. In this study, we have used delta3d base for implementing expert systems and CLIPS and also we have used NAO for simulation rcssserver3d robot and 3d football simulation have been used for implementing operation program

Expert Systems for Libraries at SCIL [Small Computers in Libraries]'88.

Science.gov (United States)

Kochtanek, Thomas R.; And Others

1988-01-01

Six brief papers on expert systems for libraries cover (1) a knowledge-based approach to database design; (2) getting started in expert systems; (3) using public domain software to develop a business reference system; (4) a music cataloging inquiry system; (5) linguistic analysis of reference transactions; and (6) a model of a reference librarian.…

Expert systems for protective monitoring of facilities

International Nuclear Information System (INIS)

Carr, K.R.

1987-01-01

In complex plants, the possibility of serious operator error always exists to some extent, but, this can be especially true during an experiment or some other unusual exercise. Possible contributing factors to operational error include personnel fatigue, misunderstanding in communication, mistakes in executing orders, uncertainty about the delegated authority, pressure to meet a demanding schedule, and a lack of understanding of the possible consequences of deliberate violations of the facility's established operating procedures. Authoritative reports indicate that most of these factors were involved in the disastrous Russian Chernobyl-4 nuclear reactor accident in April 1986, which, ironically, occurred when a safety experiment was being conducted. Given the computer hardware and software now available for implementing expert systems together with integrated signal monitoring and communications, plant protection could be enhanced by an expert system with extended features to monitor the plant. The system could require information from the operators on a rigidly enforced schedule and automatically log in and report on a scheduled time basis to authorities at a central remote site during periods of safe operation. Additionally, the system could warn an operator or automatically shut down the plant in case of dangerous conditions, while simultaneously notifying independent, responsible, off-site personnel of the action taken. This approach would provide protection beyond that provided by typical facility scram circuits. This paper presents such an approach to implementing an expert system for plant protection, together with specific hardware and software configurations. The Chernobyl accident is used as the basis of discussion

Decision support systems and expert systems for risk and safety analysis

International Nuclear Information System (INIS)

Baybutt, P.

1986-01-01

During the last 1-2 years, rapid developments have occurred in the development of decision support systems and expert systems to aid in decision making related to risk and safety of industrial plants. These activities are most noteworthy in the nuclear industry where numerous systems are under development with implementation often being made on personal computers. An overview of some of these developments is provided, and an example of one recently developed decision support system is given. This example deals with CADET, a system developed to aid the U.S. Nuclear Regulatory Commission in making decisions related to the topical issue of source terms resulting from degraded core accidents in light water reactors. The paper concludes with some comments on the likely directions of future developments in decision support systems and expert systems to aid in the management of risk and safety in industrial plants. (author)

An Intelligent Alternative Approach to the efficient Network Management

Directory of Open Access Journals (Sweden)

MARTÍN, A.

2012-12-01

Full Text Available Due to the increasing complexity and heterogeneity of networks and services, many efforts have been made to develop intelligent techniques for management. Network intelligent management is a key technology for operating large heterogeneous data transmission networks. This paper presents a proposal for an architecture that integrates management object specifications and the knowledge of expert systems. We present a new approach named Integrated Expert Management, for learning objects based on expert management rules and describe the design and implementation of an integrated intelligent management platform based on OSI and Internet management models. The main contributions of our approach is the integration of both expert system and managed models, so we can make use of them to construct more flexible intelligent management network. The prototype SONAP (Software for Network Assistant and Performance is accuracy-aware since it can control and manage a network. We have tested our system on real data to the fault diagnostic in a telecommunication system of a power utility. The results validate the model and show a significant improvement with respect to the number of rules and the error rate in others systems.

A study of diagnostics expert system for accelerator applications

International Nuclear Information System (INIS)

Tyagi, Y.; Banerji, Anil; Kotaiah, S.

2003-01-01

Knowledge based techniques are proving to be useful in a number of problem domains which typically requires human expertise. Expert systems employing knowledge based techniques are a recent product of artificial intelligence. Methods developed in the artificial intelligence area can be applied with success for certain classes of problems in accelerator. Accelerators are complex devices with thousands of components. The number of possible faults or problems that can appear is enormous. A diagnostics expert system can provide great help in finding and diagnosing problems in Indus-II accelerator sub-systems. (author)

Alpha spectral analysis via artificial neural networks

International Nuclear Information System (INIS)

Kangas, L.J.; Hashem, S.; Keller, P.E.; Kouzes, R.T.; Troyer, G.L.

1994-10-01

An artificial neural network system that assigns quality factors to alpha particle energy spectra is discussed. The alpha energy spectra are used to detect plutonium contamination in the work environment. The quality factors represent the levels of spectral degradation caused by miscalibration and foreign matter affecting the instruments. A set of spectra was labeled with a quality factor by an expert and used in training the artificial neural network expert system. The investigation shows that the expert knowledge of alpha spectra quality factors can be transferred to an ANN system

Prediction of response to antiretroviral therapy by human experts and by the EuResist data-driven expert system (the EVE study).

Science.gov (United States)

Zazzi, M; Kaiser, R; Sönnerborg, A; Struck, D; Altmann, A; Prosperi, M; Rosen-Zvi, M; Petroczi, A; Peres, Y; Schülter, E; Boucher, C A; Brun-Vezinet, F; Harrigan, P R; Morris, L; Obermeier, M; Perno, C-F; Phanuphak, P; Pillay, D; Shafer, R W; Vandamme, A-M; van Laethem, K; Wensing, A M J; Lengauer, T; Incardona, F

2011-04-01

The EuResist expert system is a novel data-driven online system for computing the probability of 8-week success for any given pair of HIV-1 genotype and combination antiretroviral therapy regimen plus optional patient information. The objective of this study was to compare the EuResist system vs. human experts (EVE) for the ability to predict response to treatment. The EuResist system was compared with 10 HIV-1 drug resistance experts for the ability to predict 8-week response to 25 treatment cases derived from the EuResist database validation data set. All current and past patient data were made available to simulate clinical practice. The experts were asked to provide a qualitative and quantitative estimate of the probability of treatment success. There were 15 treatment successes and 10 treatment failures. In the classification task, the number of mislabelled cases was six for EuResist and 6-13 for the human experts [mean±standard deviation (SD) 9.1±1.9]. The accuracy of EuResist was higher than the average for the experts (0.76 vs. 0.64, respectively). The quantitative estimates computed by EuResist were significantly correlated (Pearson r=0.695, Pexperts. However, the agreement among experts was only moderate (for the classification task, inter-rater κ=0.355; for the quantitative estimation, mean±SD coefficient of variation=55.9±22.4%). With this limited data set, the EuResist engine performed comparably to or better than human experts. The system warrants further investigation as a treatment-decision support tool in clinical practice. © 2010 British HIV Association.

A wireless sensor network-based portable vehicle detector evaluation system.

Science.gov (United States)

Yoo, Seong-eun

2013-01-17

In an upcoming smart transportation environment, performance evaluations of existing Vehicle Detection Systems are crucial to maintain their accuracy. The existing evaluation method for Vehicle Detection Systems is based on a wired Vehicle Detection System reference and a video recorder, which must be operated and analyzed by capable traffic experts. However, this conventional evaluation system has many disadvantages. It is inconvenient to deploy, the evaluation takes a long time, and it lacks scalability and objectivity. To improve the evaluation procedure, this paper proposes a Portable Vehicle Detector Evaluation System based on wireless sensor networks. We describe both the architecture and design of a Vehicle Detector Evaluation System and the implementation results, focusing on the wireless sensor networks and methods for traffic information measurement. With the help of wireless sensor networks and automated analysis, our Vehicle Detector Evaluation System can evaluate a Vehicle Detection System conveniently and objectively. The extensive evaluations of our Vehicle Detector Evaluation System show that it can measure the traffic information such as volume counts and speed with over 98% accuracy.

Model-based expert systems for linac computer controls

International Nuclear Information System (INIS)

Lee, M.J.

1988-09-01

The use of machine modeling and beam simulation programs for the control of accelerator operation has become standard practice. The success of a model-based control operation depends on how the parameter to be controlled is measured, how the measured data is analyzed, how the result of the analysis is interpreted, and how a solution is implemented. There is considerable interest in applying expert systems technology that can automate all of these processes. The design of an expert system to control the beam trajectory in linear accelerators will be discussed as an illustration of this approach. 4 figs., 1 tab

Human factors considerations for expert systems in the nuclear industry

International Nuclear Information System (INIS)

Nelson, W.R.

1988-01-01

This paper discusses the general human factors issues relative to the development and implementation of expert systems for the nuclear industry. It summarizes the relevant research that addresses these issues, and identifies those areas that need the most effort for success. Since much of the prominent work for the application of expert systems has focused on computerized aids for decision making in emergencies, this paper draws from this area for its examples. This area tends to highlight the issues because of the safety-critical nature of the application. The same issues, however, are relevant to other applications of expert systems in the nuclear industry as well, even though the consequences of failure may not be as dramatic

Experimental evaluation of an expert system for nuclear reactor operators

International Nuclear Information System (INIS)

Nelson, W.R.

1984-10-01

The United States Nuclear Regulatory Commission (USNRC) is supporting a program for the experimental evaluation of an expert system for nuclear reactor operators. A prototype expert system, called the Response Tree System, has been developed and implemented at INEL. The Response Tree System is designed to assess the status of a reactor system following an accident and recommend corrective actions to reactor operators. The system is implemented using color graphic displays and is driven by a computer simulation of the reactor system. Control of the system is accomplished using a transparent touch panel. Controlled experiments are being conducted to measure performance differences between operators using the Response Tree System and those not using it to respond to simulated accident situations. This paper summarizes the methodology and results of the evaluation of the Response Tree System, including the quantitative results obtained in the experiments thus far. Design features of the Response Tree System are discussed, and general conclusions regarding the applicability of expert systems in reactor control rooms are presented

Combining NDE and fracture mechanics by artifical intelligence expert systems techniques

International Nuclear Information System (INIS)

Mucciardi, A.N.; Riccardella, P.C.

1986-01-01

This paper reports on the development of a PC-based expert system for non-destructive evaluation. Software tools from the expert systems subfield of artificial intelligence are being used to combine both NDE and fracture mechanics algorithms into one, unified package. The system incorporates elements of computer-enhanced ultrasonic signal processing, featuring artificial intelligence learning capability, state-of-the-art fracture mechanics analytical tools, and all relevant metallurgical and design data necessary to emulate the decisions of the panel(s) of experts typically involved in generating and dispositioning NDE data

Realization of economic evaluation expert system for uranium mine project

International Nuclear Information System (INIS)

Wang Haifeng

1993-01-01

By studying the EVALUATOR, economic evaluation expert system of uranium mine project, the theoretical fundamentals of expert system, principle of inference mechanism, implementation of knowledge base, realization of explanation mechanism, acquisition of domain knowledge and representation of knowledge were described, especially the subjective Bayes approach for inexact reasoning problem used in EVALUATOR was discussed in detail

The Principles of Designing an Expert System in Teaching Mathematics

Science.gov (United States)

Salekhova, Lailya; Nurgaliev, Albert; Zaripova, Rinata; Khakimullina, Nailya

2013-01-01

This study reveals general didactic concepts of the Expert Systems (ES) development process in the educational area. The proof of concept is based on the example of teaching the 8th grade Algebra subject. The main contribution in this work is the implementation of innovative approaches in analysis and processing of data by expert system as well as…

Automatic seismic support design of piping system by an object oriented expert system

International Nuclear Information System (INIS)

Nakatogawa, T.; Takayama, Y.; Hayashi, Y.; Fukuda, T.; Yamamoto, Y.; Haruna, T.

1990-01-01

The seismic support design of piping systems of nuclear power plants requires many experienced engineers and plenty of man-hours, because the seismic design conditions are very severe, the bulk volume of the piping systems is hyge and the design procedures are very complicated. Therefore we have developed a piping seismic design expert system, which utilizes the piping design data base of a 3 dimensional CAD system and automatically determines the piping support locations and support styles. The data base of this system contains the maximum allowable seismic support span lengths for straight piping and the span length reduction factors for bends, branches, concentrated masses in the piping, and so forth. The system automatically produces the support design according to the design knowledge extracted and collected from expert design engineers, and using design information such as piping specifications which give diameters and thickness and piping geometric configurations. The automatic seismic support design provided by this expert system achieves in the reduction of design man-hours, improvement of design quality, verification of design result, optimization of support locations and prevention of input duplication. In the development of this system, we had to derive the design logic from expert design engineers and this could not be simply expressed descriptively. Also we had to make programs for different kinds of design knowledge. For these reasons we adopted the object oriented programming paradigm (Smalltalk-80) which is suitable for combining programs and carrying out the design work

ANAPPRES: An expert system for interference well-test analysis

Energy Technology Data Exchange (ETDEWEB)

Arellano, V.M.; Iglesias, E.R.; Arellano, J.; Schwarzblat, M.

1988-01-01

We present ANAPPRES V1.0, the first version of a computerized expert system capable of analyzing constant- and variable-flowrate interference tests, in which there is one active well and an arbitrary number of observation wells, in liquid-saturated homogeneous reservoirs. ANAPPRES successfully couples mathematical models, optimization techniques, heuristic knowledge and computerized graphics, a combination not often found in published expert systems. Its main advantages are that it is user friendly, requires essentially no experience on the part of the analyst, eliminates subjectivity associated with earlier techniques of analysis, can handle complex cases and large data sets, completes the analysis of even the most complex cases (including plotting the results) in one run, and is significantly faster than a human expert.

The development of an expert system to tune a beam line

International Nuclear Information System (INIS)

Schultz, D.E.; Brown, P.A.; British Columbia Univ., Vancouver, BC

1989-01-01

The experience of developing an Expert System to aid in the tuning of the Ion Source Injection beam line at TRIUMF is described. The challenging and complex task of introducing Expert System technology into an established accelerator operation is outlined. Success in this environment depends strongly on the choice of project, the choice of experts, the choice of tools, and the methods used to represent the expertise. All these choices are discussed

Fuzzy Expert System to Characterize Students

Science.gov (United States)

Van Hecke, T.

2011-01-01

Students wanting to succeed in higher education are required to adopt an adequate learning approach. By analyzing individual learning characteristics, teachers can give personal advice to help students identify their learning success factors. An expert system based on fuzzy logic can provide economically viable solutions to help students identify…

Development of an expert system for transportation of hazardous and radioactive materials

International Nuclear Information System (INIS)

Ferrada, J.J.; Michelhaugh, R.D.; Rawl, R.R.

1994-01-01

Under the sponsorship of the US Department of Energy's (DOE's) Transportation Management Division (EM-261), the Transportation Technologies Group at Oak Ridge National Laboratory (ORNL) has designed and developed an expert system prototype application of the hazardous materials transportation regulations. The objective of this task was to provide a proof-of-concept for developing a computerized expert system that will ensure straightforward, consistent, and error-free application of the hazardous materials transportation regulations. The expert system prototype entailed the analysis of what an expert in hazardous materials shipping information could/should do. From the analysis of the different features required for the expert system prototype, it was concluded that the developmental efforts should be directed to a Windows trademark 3.1 hypermedia environment. Hypermedia technology usually works as an interactive software system that gives personal computer users the ability to organize, manage, and present information in a number of formats--text, graphics, sound, and full-motion video

Experimental applications of an expert system to operator problem solving in process control

International Nuclear Information System (INIS)

Nelson, W.R.; Jenkins, J.P.

1985-01-01

The United States Nuclear Regulatory Commission (USNRC) has sponsored a program to assess the effectiveness of expert systems for nuclear reactor operators. The project has included two human factors experimental evaluations of the Response Tree expert system, a prototype expert system for helping nuclear reactor operators respond to emergency conditions. This paper discusses the Response Tree expert system, the experiments which have been performed to test its effectiveness, and the results of the experiments. Reference is made to the accident at TMI. 12 refs

Expert system for the investigation of safety system availability on a 900 MWe PWR

International Nuclear Information System (INIS)

Chauliac, C.; Deplanque, B.; To, L.H.

1988-01-01

A computer program of the expert system type would appear to be an elegant and effective tool for rapid diagnosis of safety system availability in accident situations. The expert system developed for this purpose by the Institut de Protection et de Surete Nucleaire (Institute for Nuclear Safety and Protection) has been described in this paper; its logic process has been examined in detail and illustrated by means of two examples. In its present form, this expert system monitors the availability of 21 main systems. In its final form (1989), 37 main systems will be tested. It will then include descriptions of between 1500 and 2000 objects and will utilize about 1000 rules. It will be run (as is presently the case) in a workstation with windowing facilities and graphic result displays which provide the highest degree of user-friendliness

An expert system for diagnostics and estimation of steam turbine components condition

Science.gov (United States)

Murmansky, B. E.; Aronson, K. E.; Brodov, Yu. M.

2017-11-01

The report describes an expert system of probability type for diagnostics and state estimation of steam turbine technological subsystems components. The expert system is based on Bayes’ theorem and permits to troubleshoot the equipment components, using expert experience, when there is a lack of baseline information on the indicators of turbine operation. Within a unified approach the expert system solves the problems of diagnosing the flow steam path of the turbine, bearings, thermal expansion system, regulatory system, condensing unit, the systems of regenerative feed-water and hot water heating. The knowledge base of the expert system for turbine unit rotors and bearings contains a description of 34 defects and of 104 related diagnostic features that cause a change in its vibration state. The knowledge base for the condensing unit contains 12 hypotheses and 15 evidence (indications); the procedures are also designated for 20 state parameters estimation. Similar knowledge base containing the diagnostic features and faults hypotheses are formulated for other technological subsystems of turbine unit. With the necessary initial information available a number of problems can be solved within the expert system for various technological subsystems of steam turbine unit: for steam flow path it is the correlation and regression analysis of multifactor relationship between the vibration parameters variations and the regime parameters; for system of thermal expansions it is the evaluation of force acting on the longitudinal keys depending on the temperature state of the turbine cylinder; for condensing unit it is the evaluation of separate effect of the heat exchange surface contamination and of the presence of air in condenser steam space on condenser thermal efficiency performance, as well as the evaluation of term for condenser cleaning and for tube system replacement and so forth. With a lack of initial information the expert system enables to formulate a diagnosis

HAIM OMLET: An Expert System For Research In Orthomodular Lattices And Related Structures

Science.gov (United States)

Dankel, D. D.; Rodriguez, R. V.; Anger, F. D.

1986-03-01

This paper describes research towards the construction of an expert system combining the brute force power of algorithmic computation and the inductive reasoning power of a rule-based inference engine in the mathematical area of discrete structures. Little research has been conducted on extending existing expert systems' technology to computationally complex areas. This research addresses the extension of expert systems into areas such as these, where the process of inference by itself will not produce the proper results. Additionally, the research will demonstrate the benefits of combining inference engines and mathematical algorithms to attack computationally complex problems. The specific aim is to produce an expert system which embodies expert level knowledge of orthomodular lattices, graphs, structure spaces, boolean algebras, incidence relations, and projective configurations. The resulting system, implemented on a micro-computer, will provide researchers a powerful and accessible tool for exploring these discrete structures. The system's "shell" will provide a structure for developing other expert systems with similar capabilities in such related areas as coding theory, categories, monoids, automata theory, and non-standard logics.

Online network of subspecialty aortic disease experts: Impact of "cloud" technology on management of acute aortic emergencies.

Science.gov (United States)

Schoenhagen, Paul; Roselli, Eric E; Harris, C Martin; Eagleton, Matthew; Menon, Venu

2016-07-01