WorldWideScience

Sample records for net body force

  1. The swim force as a body force

    Science.gov (United States)

    Yan, Wen; Brady, John

    2015-11-01

    Net (as opposed to random) motion of active matter results from an average swim (or propulsive) force. It is shown that the average swim force acts like a body force - an internal body force [Yan and Brady, Soft Matter, DOI:10.1039/C5SM01318F]. As a result, the particle-pressure exerted on a container wall is the sum of the swim pressure [Takatori et al., Phys. Rev. Lett., 2014, 113, 028103] and the `weight' of the active particles. A continuum mechanical description is possible when variations occur on scales larger than the run length of the active particles and gives a Boltzmann-like distribution from a balance of the swim force and the swim pressure. Active particles may also display `action at a distance' and accumulate adjacent to (or be depleted from) a boundary without any external forces. In the momentum balance for the suspension - the mixture of active particles plus fluid - only external body forces appear.

  2. Evolution of Nuclear Many-Body Forces with the Similarity Renormalization Group

    OpenAIRE

    Jurgenson, E. D.; Navratil, P.; Furnstahl, R. J.

    2009-01-01

    The first practical method to evolve many-body nuclear forces to softened form using the Similarity Renormalization Group (SRG) in a harmonic oscillator basis is demonstrated. When applied to He4 calculations, the two- and three-body oscillator matrix elements yield rapid convergence of the ground-state energy with a small net contribution of the induced four-body force.

  3. Body composition and net energy requirements of Brazilian Somali lambs

    Directory of Open Access Journals (Sweden)

    Elzânia S. Pereira

    2014-12-01

    Full Text Available The aim of this study was to determine the energy requirements for maintenance (NEm and growth of 48 Brazilian Somali ram lambs with an average initial body weight of 13.47±1.76 kg. Eight animals were slaughtered at the trials beginning as a reference group to estimate the initial empty body weight (EBW and body composition. The remaining animals were assigned to a randomised block design with eight replications per block and five diets with increasing metabolisable energy content (4.93, 8.65, 9.41, 10.12 and 11.24 MJ/kg dry matter. The logarithm of heat production was regressed against metabolisable energy intake (MEI, and the NEm (kJ/kg0.75 EBW/day were estimated by extrapolation, when MEI was set at zero. The NEm was 239.77 kJ/kg0.75 EBW/day. The animal’s energy and EBW fat contents increased from 11.20 MJ/kg and 208.54 g/kg to 13.54 MJ/kg and 274.95 g/kg of EBW, respectively, as the BW increased from 13 to 28.70 kg. The net energy requirements for EBW gain increased from 13.79 to 16.72 MJ/kg EBW gain for body weights of 13 and 28.70 kg. Our study indicated the net energy requirements for maintenance in Brazilian Somali lambs were similar to the values commonly recommended by the United States’ nutritional system, but lower than the values recommended by Agricultural Research Council and Commonwealth Scientific and Industrial Research Organization. Net requirements for weight gain were less compared to the values commonly recommended by nutritional system of the United States.

  4. Initial four-body forces in many-body calculations

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, Stefan; Roth, Robert [Institut fuer Kernphysik, Technische Universitaet Darmstadt (Germany)

    2016-07-01

    For the ab-initio description of light and medium-mass nuclei, chiral effective field theory is used successfully. Improving the precision and uncertainty estimation of chiral forces, especially an improved description of medium-mass nuclei, requires consistent order-by-order calculations. Starting at N{sup 3}LO, chiral four-body forces play a role and their impact on nuclei beyond few-body systems is currently unknown. Even without initial four-body forces, transformations such as the similarity renormalization group induce many-body forces. We model the four-body forces using a simple contact interaction and investigate its effect on nuclear many-body observables, especially ground-state energies and radii, as well as correlations between them. The four-body forces are evaluated in a Jacobi harmonic oscillator (HO) basis and subsequently used in no-core shell model and Hartree-Fock calculations for light- and medium mass nuclei. Handling of chiral forces is identical to a contact interaction, once they are evaluated in a HO basis.

  5. Three-body critical Casimir forces.

    Science.gov (United States)

    Mattos, T G; Harnau, L; Dietrich, S

    2015-04-01

    Within mean-field theory we calculate universal scaling functions associated with critical Casimir forces for a system consisting of three parallel cylindrical colloids immersed in a near-critical binary liquid mixture. For several geometrical arrangements and boundary conditions at the surfaces of the colloids we study the force between two colloidal particles in the direction normal to their axes, analyzing the influence of the presence of a third particle on that force. Upon changing temperature or the relative positions of the particles we observe interesting features such as a change of sign of this force caused by the presence of the third particle. We determine the three-body component of the forces acting on one of the colloids by subtracting the pairwise forces from the total force. The three-body contribution to the total critical Casimir force turns out to be more pronounced for small surface-to-surface distances between the colloids as well as for temperatures close to criticality. Moreover, we compare our results with similar ones for other physical systems such as three atoms interacting via van der Waals forces.

  6. Sn and three-body forces

    Indian Academy of Sciences (India)

    c Indian Academy of Sciences. Vol. 85, No. 3. — journal of. September 2015 physics pp. 403–413. 136. Sn and three-body forces. M SAHA SARKAR1,∗ and S SARKAR2. 1Saha Institute of ... 2Indian Institute of Engineering Science and Technology, Shibpur, Howrah 711 103, India ... So far, experimental investigations.

  7. Quantifying the net slab pull force as a driving mechanism for plate tectonics

    NARCIS (Netherlands)

    Schellart, W. P.

    2004-01-01

    It has remained unclear how much of the negative buoyancy force of the slab (FB) is used to pull the trailing plate at the surface into the mantle. Here I present three-dimensional laboratory experiments to quantify the net slab pull force (FNSP) with respect to FB during subduction. Results show

  8. Optimizing kick rate and amplitude for Paralympic swimmers via net force measures.

    Science.gov (United States)

    Fulton, Sacha K; Pyne, David; Burkett, Brendan

    2011-02-01

    Kicking is a key component of freestyle swimming yet the optimum combination of kick rate and kick amplitude remains unknown. For Paralympic swimmers, with upper and lower limb disabilities, the influence of the kick plays an important role in net force production. To determine optimum kick characteristics, 12 Paralympic swimmers aged 19.8 ± 2.9 years (mean ± s) were towed at their individual peak freestyle speed. The experimental conditions were (i) a prone streamline glide for passive trials and (ii) maximal freestyle kicking in a prone streamline for active trials at different speeds and kick amplitudes. Kick rate was quantified using inertial sensor technology. Towing speed was assessed using a novel and validated dynamometer, and net force was assessed using a Kistler force-platform system. When peak speed was increased by 5%, the active force increased 24.2 ± 5.3% (90% confidence limits), while kick rate remained at approximately 150 kicks per minute. Larger amplitude kicking increased the net active force by 25.1 ± 10.6%, although kick rate decreased substantially by 13.6 ± 5.1%. Based on the current kick rate and amplitude profile adopted by Paralympic swimmers, these characteristics are appropriate for optimizing net force.

  9. Casimir-Polder forces on atoms in the presence of magnetoelectronic bodies

    Energy Technology Data Exchange (ETDEWEB)

    Buhmann, S.Y.

    2007-07-05

    In this work, the CP force between a single neutral atom or molecule and neutral magnetoelectric bodies is studied. The focus lies on the pure vacuum CP force, i.e., the electromagnetic field is in general understood to be in its ground state. Furthermore, we assume that the atom-body separation is sufficiently large to ensure that the atom is adequately characterised as an electric dipole, while the body can be described by its macroscopic magnetoelectric properties; and that repulsive exchange forces due to the overlap between the electronic wave functions of the atom and the bodies can be neglected. Interactions due to non-vanishing net charges, permanent electric dipole moments, magnetisability, quadrupole (or higher multipole) polarisabilities of the atom and those resulting from non-local or anisotropic magnetoelectric properties of the bodies are ignored. (orig.)

  10. No cuerpos, lugares del anonimato: El cuerpo en el net.art Non-bodies, locations of anonymity: the body in the net.art

    Directory of Open Access Journals (Sweden)

    María Teresa AGUILAR

    2011-07-01

    Full Text Available Este texto se ocupa del papel que la representación del cuerpo humano adquiere en el net.art. Por un lado, considera que el cuerpo humano ha sido descorporeizado y proyectado en el no lugar del espacio telemático, enfrentado así a las tendencias de rematerialización del cuerpo, como el arte carnal y el body art, y, por otra, parte considera que incluso en esta esfera ciberespacial el cuerpo de Internet se ve como una prolongación del arte carnal, según los trabajos de Orlan y Tomic. La construcción del género y el trabajo artístico de las mujeres en la red es otro de los objetivos que este texto pone de manifiesto como vinculación de mujeres y nuevas tecnologías en el contexto artístico del net.art.This text deals with the role that the representation of the human body acquired in net.art. On the one hand, considers that the human body has been disembodied and projected in the nowhere of telematic space, thus faced to the rematerialization trends of the body, as the carnal art and body art, and by the other hand considers that even in this cyberspace area the Internet´s body is seen as an extension of carnal art, depending on the work of Orlan and Tomic. The construction of gender and women's artwork in the network is another objective that this text shows as linking between women and new technologies in the artistic context of net.art.

  11. Probing Gravitational Sensitivity in Biological Systems Using Magnetic Body Forces

    Science.gov (United States)

    Guevorkian, Karine; Wurzel, Sam; Mihalusova, Mariana; Valles, Jim

    2003-01-01

    At Brown University, we are developing the use of magnetic body forces as a means to simulate variable gravity body forces on biological systems. This tool promises new means to probe gravi-sensing and the gravi-response of biological systems. It also has the potential as a technique for screening future systems for space flight experiments.

  12. Three-Body Nuclear Forces from a Matrix Model

    CERN Document Server

    Hashimoto, Koji

    2010-01-01

    We compute three-body nuclear forces at short distances by using the nuclear matrix model of holographic QCD proposed in our previous paper with P. Yi. We find that the three-body forces at short distances are repulsive for (a) aligned three neutrons with averaged spins, and (b) aligned proton-proton-neutron / proton-neutron-neutron. These indicate that in dense states of neutrons such as cores of neutron stars, or in Helium-3 / tritium nucleus, the repulsive forces are larger than the ones estimated from two-body forces only.

  13. Front-crawl stroke-coordination and symmetry: a comparison between timing and net drag force protocols.

    Science.gov (United States)

    Formosa, Danielle P; Sayers, Mark G L; Burkett, Brendan

    2013-01-01

    This study compared stroke-coordination and symmetry using traditional timing methods and net drag force profiles. Twenty elite front-crawl swimmers Federation Internationale de Natation (FINA ranking 908 ± 59) were tested to identify the influence of both gender and breathing. A total of six randomised free-swimming trials were conducted: (i) three breathing, (ii) three non-breathing. Net drag forces were measured using an assisted towing device and the magnitude and location of minimum and maximum was determined to create a stroke symmetry index. Within the breathing condition, there were significant differences between the two symmetry index methods. Using the timing index, all 10 female participants, and seven males, illustrated symmetrical timing. For the net drag force profile, only three females and zero males exhibited a symmetrical minimum net drag force; and only four females and two males demonstrated a symmetrical maximum net drag force index. No differences existed within the non-breathing condition. There was a small (5.2%) difference in the location of maximum net drag force, when stratifying by gender. During the breathing condition, gender also influenced the percentage of overlap for the breathing stroke by 25.2%, and 14.6 % for the non-breathing stroke. A combination of the traditional timing based and net drag force based profile can guide future swimming technique intervention strategies.

  14. A moving control volume method for smooth computation of hydrodynamic forces and torques on immersed bodies

    Science.gov (United States)

    Nangia, Nishant; Patankar, Neelesh A.; Bhalla, Amneet P. S.

    2017-11-01

    Fictitious domain methods for simulating fluid-structure interaction (FSI) have been gaining popularity in the past few decades because of their robustness in handling arbitrarily moving bodies. Often the transient net hydrodynamic forces and torques on the body are desired quantities for these types of simulations. In past studies using immersed boundary (IB) methods, force measurements are contaminated with spurious oscillations due to evaluation of possibly discontinuous spatial velocity of pressure gradients within or on the surface of the body. Based on an application of the Reynolds transport theorem, we present a moving control volume (CV) approach to computing the net forces and torques on a moving body immersed in a fluid. The approach is shown to be accurate for a wide array of FSI problems, including flow past stationary and moving objects, Stokes flow, and high Reynolds number free-swimming. The approach only requires far-field (smooth) velocity and pressure information, thereby suppressing spurious force oscillations and eliminating the need for any filtering. The proposed moving CV method is not limited to a specific IB method and is straightforward to implement within an existing parallel FSI simulation software. This work is supported by NSF (Award Numbers SI2-SSI-1450374, SI2-SSI-1450327, and DGE-1324585), the US Department of Energy, Office of Science, ASCR (Award Number DE-AC02-05CH11231), and NIH (Award Number HL117163).

  15. Net radiative forcing due to changes in regional emissions of tropospheric ozone precursors

    Science.gov (United States)

    Naik, Vaishali; Mauzerall, Denise; Horowitz, Larry; Schwarzkopf, M. Daniel; Ramaswamy, V.; Oppenheimer, Michael

    2005-12-01

    emissions of NOx, CO, and NMHCs, changes in O3 and CH4 concentrations result in a net negative radiative forcing (cooling). Thus we conclude that simultaneous reductions of CO, NMHCs, and NOx lead to a net reduction in radiative forcing due to resulting changes in tropospheric O3 and CH4 while reductions in NOx emissions alone do not.

  16. Whole-body cortisol response of zebrafish to acute net handling stress

    Science.gov (United States)

    Ramsay, J.M.; Feist, G.W.; Varga, Z.M.; Westerfield, M.; Kent, M.L.; Schreck, C.B.

    2009-01-01

    Zebrafish, Danio rerio, are frequently handled during husbandry and experimental procedures in the laboratory, yet little is known about the physiological responses to such stressors. We measured the whole-body cortisol levels of adult zebrafish subjected to net stress and air exposure at intervals over a 24 h period; cortisol recovered to near control levels by about 1 h post-net-stress (PNS). We then measured cortisol at frequent intervals over a 1 h period. Cortisol levels were more than 2-fold higher in net stressed fish at 3 min PNS and continued to increase peaking at 15 min PNS, when cortisol levels were 6-fold greater than the control cortisol. Mean cortisol declined from 15 to 60 min PNS, and at 60 min, net-stressed cortisol was similar to control cortisol. Because the age of fish differed between studies, we examined resting cortisol levels of fish of different ages (3, 7, 13, and 19 months). The resting cortisol values among tanks with the same age fish differed significantly but there was no clear effect of age. Our study is the first to report the response and recovery of cortisol after net handling for laboratory-reared zebrafish. ?? 2009 Elsevier B.V.

  17. Net radiative forcing and air quality responses to regional CO emission reductions

    Directory of Open Access Journals (Sweden)

    M. M. Fry

    2013-05-01

    Full Text Available Carbon monoxide (CO emissions influence global and regional air quality and global climate change by affecting atmospheric oxidants and secondary species. We simulate the influence of halving anthropogenic CO emissions globally and individually from 10 regions on surface and tropospheric ozone, methane, and aerosol concentrations using a global chemical transport model (MOZART-4 for the year 2005. Net radiative forcing (RF is then estimated using the GFDL (Geophysical Fluid Dynamics Laboratory standalone radiative transfer model. We estimate that halving global CO emissions decreases global annual average concentrations of surface ozone by 0.45 ppbv, tropospheric methane by 73 ppbv, and global annual net RF by 36.1 mW m−2, nearly equal to the sum of changes from the 10 regional reductions. Global annual net RF per unit change in emissions and the 100 yr global warming potential (GWP100 are estimated as −0.124 mW m−2 (Tg CO−1 and 1.34, respectively, for the global CO reduction, and ranging from −0.115 to −0.131 mW m−2 (Tg CO−1 and 1.26 to 1.44 across 10 regions, with the greatest sensitivities for regions in the tropics. The net RF distributions show widespread cooling corresponding to the O3 and CH4 decreases, and localized positive and negative net RFs due to changes in aerosols. The strongest annual net RF impacts occur within the tropics (28° S–28° N followed by the northern midlatitudes (28° N–60° N, independent of reduction region, while the greatest changes in surface CO and ozone concentrations occur within the reduction region. Some regional reductions strongly influence the air quality in other regions, such as East Asia, which has an impact on US surface ozone that is 93% of that from North America. Changes in the transport of CO and downwind ozone production clearly exceed the direct export of ozone from each reduction region. The small variation in CO GWPs among world regions suggests that future international

  18. Probing Gravitational Sensitivity in Biological Systems Using Magnetic Body Forces

    Science.gov (United States)

    Valles, James; Guevorkian, Karine; Wurzel, Samuel; Mihalusova, Mariana

    2003-03-01

    We have commissioned a superconducting solenoid based apparatus designed to exert strong magnetic body forces on biological specimens and other organic materials in ambient environmental conditions for extended periods. In its room temperature bore, it can produce a maximum magnetic field-field gradient product of 16 T^2-cm-1 which is sufficient to levitate frog embryos Xenopus Laevis[1]. We will discuss how we are applying these magnetic body forces to probe the known influences of gravitational forces on frog embryos and the swimming behavior of Paramecium Caudatum. In the process, we will describe a novel method for measuring the diamagnetic susceptibilities of specimens such as paramecia.

  19. Relationship between resultant force at the pushrim and the net shoulder joint moments during manual wheelchair propulsion in elderly persons.

    Science.gov (United States)

    Desroches, Guillaume; Aissaoui, Rachid; Bourbonnais, Daniel

    2008-06-01

    To determine the relationship between the resultant force at the pushrim and the net shoulder joint moments during manual wheelchair propulsion in elderly persons. Convenience sample. Motion analysis laboratory. Older manual wheelchair users (N=14; age, 68.2+/-5.2y) were tested. Kinematic and kinetic data were collected during manual wheelchair propulsion at a speed between 0.96 and 1.01m/s for 10 seconds and at a power output around 22.4W on a wheelchair ergometer. Net shoulder joint moments were computed with an inverse dynamic model. The mechanical use of the forces at the pushrim and the mechanical fraction of effective force were measured during propulsion. Mechanical use and mechanical fraction of effective force had a positive and significant correlation with the net internal (Pplane, and the net flexion (Pplane. The results suggest that because the resultant force at the pushrim has a greater tangential component and a greater proportion of the maximal voluntary force, most of the net moments around the shoulder are higher. Thus the optimal way of propelling, from a mechanical point of view (ie, tangential), may not be advantageous for manual wheelchair users.

  20. Interaction Forces Between Multiple Bodies in a Magnetic Field

    Science.gov (United States)

    Joffe, Benjamin

    1996-01-01

    Some of the results from experiments to determine the interaction forces between multiple bodies in a magnetic field are presented in this paper. It is shown how the force values and the force directions depend on the configuration of the bodies, their relative positions to each other, and the vector of the primary magnetic field. A number of efficient new automatic loading and assembly machines, as well as manipulators and robots, have been created based on the relationship between bodies and magnetic fields. A few of these patented magnetic devices are presented. The concepts involved open a new way to design universal grippers for robot and other kinds of mechanisms for the manipulation of objects. Some of these concepts can be used for space applications.

  1. Lift Force Acting on Bodies in Viscous Liquid Under Vibration

    Science.gov (United States)

    Schipitsyn, Vitaliy; Ivanova, Alevtina; Vlasova, Olga; Kozlov, Victor

    2014-11-01

    The averaged lift force acting on a rigid body located near the wall of the cavity with a viscous liquid under high-frequency oscillations of various types is studied experimentally and theoretically. The experiments are conducted with cylindrical and rectangular solids. Amplitude and frequency of vibration, viscosity and density of fluid, specific solid size, its density and shape vary. Lift force was measured by the dynamic hanging of the body in the gravity when the body oscillates without touching the cavity walls. The vibrations generate a repulsive force, holding a heavy body above the bottom of the cavity, and the light one at some distance from the ceiling. Lift force changes qualitatively in case of combined translational and rotational oscillations of the cavity containing fluid and solid; it is much greater than at the translational vibrations and appears throughout the entire volume of the liquid. The work contains a theoretical description of the mechanism of lift force generation and the comparison of the experimental and theoretical results. The agreement of the results is found in the limit of high dimensionless frequencies. The considered effects could be interesting for vibrational control of solid inclusions in viscous liquids. Work was done in the framework of the Program of strategic development of PSHPU (project 030-F) and supported by Ministry of Education of Perm Region (project C26/625) and grant 4022.2014.1 (Leading Scientific School).

  2. Collision of viscoelastic bodies: Rigorous derivation of dissipative force.

    Science.gov (United States)

    Goldobin, Denis S; Susloparov, Eugeniy A; Pimenova, Anastasiya V; Brilliantov, Nikolai V

    2015-06-01

    We report a new theory of dissipative forces acting between colliding viscoelastic bodies. The impact velocity is assumed not to be large to neglect plastic deformations in the material and propagation of sound waves. We consider the general case of bodies of an arbitrary convex shape and of different materials. We develop a mathematically rigorous perturbation scheme to solve the continuum mechanics equations that deal with both displacement and displacement rate fields and accounts for the dissipation in the bulk of the material. The perturbative solution of these equations allows to go beyond the previously used quasi-static approximation and obtain the dissipative force. The derived force does not suffer from the inconsistencies of the quasi-static approximation, like the violation of the third Newton's law for the case of different materials, and depends on particle deformation and deformation rate.

  3. Genetic parameters of estimated net energy efficiencies for milk production, maintenance, and body weight change in dairy cows.

    Science.gov (United States)

    Buttazzoni, L; Mao, I L

    1989-03-01

    Net efficiencies of converting intake energy into energy for maintenance, milk production, and body weight change in a lactation were estimated for each of 79 Holstein cows by a two-stage multiple regression model. Cows were from 16 paternal half-sib families, which each had members in at least two of the six herds. Each cow was recorded for milk yield, net energy intake, and three efficiency traits. These were analyzed in a multitrait model containing the same 14 fixed subclasses of herd by season by parity and a random factor of sires for each of the five traits. Restricted maximum likelihood estimates of sire and residual (co)variance components were obtained by an expectation maximization algorithm with canonical transformations. Between milk yield and net energy intake, net energy efficiencies for milk yield, maintenance, and body weight change, the estimated phenotypic correlations were .36, -.02, .08, and -.06, while the genetic correlations were .92, .56, .02, and -.32, respectively. Both genetic and phenotypic correlations were zero between net energy efficiency of maintenance and that of milk yield and .17 between net energy efficiency of body weight change and that of milk yield. The estimated genetic correlation between net efficiency for lactation and milk yield is approximately 60% of that between gross efficiency and milk yield. With a heritability of .32 equivalent.49, net energy efficiency for milk yield may be worth consideration for genetic selection in certain dairy cattle populations.

  4. Force direction patterns promote whole body stability even in hip-flexed walking, but not upper body stability in human upright walking

    Science.gov (United States)

    Müller, Roy; Rode, Christian; Aminiaghdam, Soran; Vielemeyer, Johanna; Blickhan, Reinhard

    2017-11-01

    Directing the ground reaction forces to a focal point above the centre of mass of the whole body promotes whole body stability in human and animal gaits similar to a physical pendulum. Here we show that this is the case in human hip-flexed walking as well. For all upper body orientations (upright, 25°, 50°, maximum), the focal point was well above the centre of mass of the whole body, suggesting its general relevance for walking. Deviations of the forces' lines of action from the focal point increased with upper body inclination from 25 to 43 mm root mean square deviation (RMSD). With respect to the upper body in upright gait, the resulting force also passed near a focal point (17 mm RMSD between the net forces' lines of action and focal point), but this point was 18 cm below its centre of mass. While this behaviour mimics an unstable inverted pendulum, it leads to resulting torques of alternating sign in accordance with periodic upper body motion and probably provides for low metabolic cost of upright gait by keeping hip torques small. Stabilization of the upper body is a consequence of other mechanisms, e.g. hip reflexes or muscle preflexes.

  5. Gravitational body forces focus North American intraplate earthquakes

    Science.gov (United States)

    Levandowski, William Brower; Zellman, Mark; Briggs, Richard

    2017-01-01

    Earthquakes far from tectonic plate boundaries generally exploit ancient faults, but not all intraplate faults are equally active. The North American Great Plains exemplify such intraplate earthquake localization, with both natural and induced seismicity generally clustered in discrete zones. Here we use seismic velocity, gravity and topography to generate a 3D lithospheric density model of the region; subsequent finite-element modelling shows that seismicity focuses in regions of high-gravity-derived deviatoric stress. Furthermore, predicted principal stress directions generally align with those observed independently in earthquake moment tensors and borehole breakouts. Body forces therefore appear to control the state of stress and thus the location and style of intraplate earthquakes in the central United States with no influence from mantle convection or crustal weakness necessary. These results show that mapping where gravitational body forces encourage seismicity is crucial to understanding and appraising intraplate seismic hazard.

  6. Climatic and oceanic forcing of new, net, and diatom production in the North Water

    Science.gov (United States)

    Tremblay, Jean-Eric; Gratton, Yves; Fauchot, Juliette; Price, Neil M.

    New, net, and diatom production in the North Water were estimated during May to July 1998 from in vitro measurements of nitrate uptake and mesoscale temporal changes in the inventories of nitrate, silicate, oxygen, and inorganic carbon (DIC). Sampling stations were divided into two domains according to the position of the dominant water types: the silicate-rich Arctic water (SRAW) and Baffin Bay Water (BBW). BBW dominated in the southeast and was associated with relatively shallow upper mixed layers (UMLs) and weak horizontal advection. A phytoplankton bloom started in late April in BBW and grew slowly over 7 weeks, during which time the build-up of particulate organic nitrogen and carbon accounted for ca. 80% of the nitrate and DIC deficit, respectively. Over half of the new production (1.37 g C m -2 d -1) during this period was attributed to wind-driven replenishment of nitrate in the euphotic zone. The bloom culminated when seasonally declining winds and rising temperatures severed the UML from the deep nutrient reservoir. The same change in weather induced ice melt, stratification, and bloom development in northern SRAW, which had previously been characterized by deep UMLs. Collectively, the results imply that the timing and magnitude of blooms in the North Water are controlled by a succession of oceanic and climatic forcings. New C production in the North Water during April to July (1.11 g C m -2 d -1) was an order of magnitude higher than in adjacent waters and up to 8 times higher than in the Northeast Water polynya. As much as 80% of this production was mediated by diatoms >5 μm, suggesting potentially high and efficient C transfer to the herbivorous food web and deep waters.

  7. The positive net radiative greenhouse gas forcing of increasing methane emissions from a thawing boreal forest-wetland landscape.

    Science.gov (United States)

    Helbig, Manuel; Chasmer, Laura E; Kljun, NatasCha; Quinton, William L; Treat, Claire C; Sonnentag, Oliver

    2017-06-01

    At the southern margin of permafrost in North America, climate change causes widespread permafrost thaw. In boreal lowlands, thawing forested permafrost peat plateaus ('forest') lead to expansion of permafrost-free wetlands ('wetland'). Expanding wetland area with saturated and warmer organic soils is expected to increase landscape methane (CH4 ) emissions. Here, we quantify the thaw-induced increase in CH4 emissions for a boreal forest-wetland landscape in the southern Taiga Plains, Canada, and evaluate its impact on net radiative forcing relative to potential long-term net carbon dioxide (CO2 ) exchange. Using nested wetland and landscape eddy covariance net CH4 flux measurements in combination with flux footprint modeling, we find that landscape CH4 emissions increase with increasing wetland-to-forest ratio. Landscape CH4 emissions are most sensitive to this ratio during peak emission periods, when wetland soils are up to 10 °C warmer than forest soils. The cumulative growing season (May-October) wetland CH4 emission of ~13 g CH4  m-2 is the dominating contribution to the landscape CH4 emission of ~7 g CH4  m-2 . In contrast, forest contributions to landscape CH4 emissions appear to be negligible. The rapid wetland expansion of 0.26 ± 0.05% yr-1 in this region causes an estimated growing season increase of 0.034 ± 0.007 g CH4  m-2  yr-1 in landscape CH4 emissions. A long-term net CO2 uptake of >200 g CO2  m-2  yr-1 is required to offset the positive radiative forcing of increasing CH4 emissions until the end of the 21st century as indicated by an atmospheric CH4 and CO2 concentration model. However, long-term apparent carbon accumulation rates in similar boreal forest-wetland landscapes and eddy covariance landscape net CO2 flux measurements suggest a long-term net CO2 uptake between 49 and 157 g CO2  m-2  yr-1 . Thus, thaw-induced CH4 emission increases likely exert a positive net radiative greenhouse gas forcing through the 21st century.

  8. Measuring the interaction forces between protein inclusion bodies and an air bubble using an atomic force microscope.

    Science.gov (United States)

    Wangsa-Wirawan, N D; Ikai, A; O'Neill, B K; Middelberg, A P

    2001-01-01

    Interaction forces between protein inclusion bodies and an air bubble have been quantified using an atomic force microscope (AFM). The inclusion bodies were attached to the AFM tip by covalent bonds. Interaction forces measured in various buffer concentrations varied from 9.7 nN to 25.3 nN (+/- 4-11%) depending on pH. Hydrophobic forces provide a stronger contribution to overall interaction force than electrostatic double layer forces. It also appears that the ionic strength affects the interaction force in a complex way that cannot be directly predicted by DLVO theory. The effects of pH are significantly stronger for the inclusion body compared to the air bubble. This study provides fundamental information that will subsequently facilitate the rational design of flotation recovery system for inclusion bodies. It has also demonstrated the potential of AFM to facilitate the design of such processes from a practical viewpoint.

  9. The response of a harmonically forced premixed flame stabilized on a heat-conducting bluff-body

    KAUST Repository

    Kedia, Kushal S.

    2015-01-01

    © 2014 The Combustion Institute. The objective of this work is to investigate the unsteady response of a bluff-body stabilized laminar premixed flame to harmonic inlet velocity excitation. A time series analysis was performed to analyze the physical sequence of events at a fixed longitudinal forcing frequency of 100 Hz for cases with (1) two different equivalence ratios and (2) two different thermal properties of the stabilizing bluff-body. It was observed that conjugate heat exchange between the heat conducting bluff-body and the surrounding reacting flow has a crucial impact on the dynamic response. The flame area and anchoring location, the net conjugate heat transfer and the total heat release underwent significant oscillations. The latter was mean shifted and had multiple frequencies. The burning velocity varied significantly along the flame length and the recirculation zone underwent complex changes in its shape and size during an unsteady cycle. The lower equivalence ratio case exhibited vortex shedding after an initial symmetric response with periodic flame extinction and re-ignition along its surface, unlike the higher equivalence ratio case. The metal/ceramic bluff-body showed a net heat transfer directed from/to the bluff-body, to/from the reacting flow during an unsteady cycle, resulting in a significantly different flame response for the two otherwise equivalent cases.

  10. On the axioms of the forces in the mechanics of rigid bodies

    Directory of Open Access Journals (Sweden)

    Lámer Géza

    2017-01-01

    Full Text Available Newton summarised knowledge related to forces in three axioms. The first and second ones define the mechanical state and motion of the examined body when there is no force or when force is exerted on the body. The third defines the law of action and reaction. Newton did not define it as separate axiom but assumed that forces are completely independent from each other. The statics applies four axioms. The first applies to the balance of two forces while the second one applies of three forces. The third axiom defines the relationships inside an equilibrium force system. The fourth one is the axiom of action and reaction. The two axiom systems are independent from each other. Further the independent axioms are applied in case of constraint forces: frictionless reaction force orthogonal on the forced surface, friction force acts in the direction of the motion, the deformation can be elastic, plastic and viscous.

  11. Tornado-like flows driven by magnetic body forces

    Science.gov (United States)

    Gerbeth, Gunter; Grants, Ilmars; Vogt, Tobias; Eckert, Sven

    2014-11-01

    Alternating magnetic fields produce well-defined flow-independent body forces in electrically conducting media. This property is used to construct a laboratory analogue of the Fiedler chamber with a room-temperature liquid metal as working fluid. A continuously applied rotating magnetic field (RMF) provides the source of the angular momentum. A pulse of a much stronger travelling magnetic field drives a converging flow at the metal surface, which focuses this angular momentum towards the axis of the container. The resulting vortex is studied experimentally and numerically. In a certain range of the ratio of both driving actions the axial velocity changes its direction in the vortex core, resembling the subsidence in an eye of a tropical cyclone or a large tornado. During the initial deterministic spin-up stage the vortex is well described by axisymmetric direct numerical simulation. Being strong enough the flow develops a funnel-shaped surface depression that enables visual observation of the vortex structure. As the RMF strength is increased the eyewall diameter grows until it breaks down to multiple vortices. A number of further observed similarities to tornado-like vortices will be discussed. The work is supported by the German Helmholtz Association in frame of the LIMTECH alliance.

  12. Three-body {lambda}NN force due to {lambda}-{sigma} coupling

    Energy Technology Data Exchange (ETDEWEB)

    Myint, Khin Swe [Mandalay Univ., Mandalay (Myanmar); Akaishi, Yoshinori [High Energy Accelerator Research Organization, Inst. of Particle and Nuclear Studies, Tsukuba, Ibaraki (Japan)

    2003-03-01

    The {lambda}NN three - body force due to coherent {lambda} - {sigma} Coupling effect was derived from realistic Nijmegen model D potential. Repulsive and attractive three - body {lambda}NN forces were reconcilably accounted. For {sup 5}He, within one - channel description, {lambda}NN force is largely repulsive and its origin comes from Pauli forbidden terms. Within two - channel description, attractive Pauli allowed terms exist and resulting three - body force is always attractive. Large attractive {lambda}NN force effect due to coherent {lambda} - {sigma} coupling effect is predicted in neutron - rich nuclei. The attractive coherent {lambda} - {sigma} coupling effect is largely enhanced at high density neutron matter. The attractive three - body {lambda}NN force effect is essential dynamics of {lambda} - {sigma} coupling while the repulsive Nogami three - body effect arises from Pauli forbidden diagrams. (Y. Kazumata)

  13. Lorentz Body Force Induced by Traveling Magnetic Fields

    Science.gov (United States)

    Volz, M. P.; Mazuruk, K.

    2003-01-01

    The Lorentz force induced by a traveling magnetic field (TMF) in a cylindrical container has been calculated. The force can be used to control flow in dectrically conducting melts and the direction of the magnetic field and resulting flow can be reversed. A TMF can be used to partially cancel flow driven by buoyancy. The penetration of the field into the cylinder decreases as the frequency increases, and there exists an optimal value of frequency for which the resulting force is a maximum. Expressions for the Lorentz force in the limiting cases of low frequency and infinite cylinder are also given and compared to the numerical calculations.

  14. Identification of Motive Forces on the Whole Body System during Walking

    Directory of Open Access Journals (Sweden)

    Raghdan J. AlKhoury

    2010-01-01

    Full Text Available Motive forces by muscles are applied to different parts of the human body in a periodic fashion when walking at a uniform rate. In this study, the whole human body is modeled as a multidegree of freedom (MDOF system with seven degrees of freedom. In view of the changing contact conditions with the ground due to alternating feet movements, the system under study is considered piecewise time invariant for each half-period when one foot is in contact with the ground. Forces transmitted from the body to the ground while walking at a normal pace are experimentally measured and numerically simulated. Fourth-order Runge-Kutta method is employed to numerically simulate the forces acting on different masses of the body. An optimization problem is formulated with the squared difference between the measured and simulated forces transmitted to the ground as the objective function, and the motive forces on the body masses as the design variables to solve.

  15. N-Body Nuclear Forces at Short Distances in Holographic QCD

    CERN Document Server

    Hashimoto, Koji; Nakatsukasa, Takashi

    2010-01-01

    We provide a calculation of N-body (N>2) nucleon interactions at short distances in holographic QCD. In the Sakai-Sugimoto model of large N_c massless QCD, N baryons are described by N Yang-Mills instantons in 5 spacetime dimensions. We compute a classical short distance interaction hamiltonian for N 'tHooft instantons. This corresponds to N baryons sharing identical classical spins and isospins. We find that genuine N-body nuclear forces turn out to vanish for N>2, at the leading order. This suggests that classical N-body forces are always suppressed compared with 2-body forces.

  16. NetTweens: The Internet and Body Image Concerns in Preteenage Girls

    Science.gov (United States)

    Tiggemann, Marika; Slater, Amy

    2014-01-01

    The aim of the study was to examine the relationship between media exposure and body image concerns in preteenage girls, with a particular focus on the Internet. A sample of 189 girls (aged 10-12 years) completed questionnaire measures of media consumption and body image concerns. Nearly all girls (97.5%) had access to the Internet in their home.…

  17. Therapist-guided, Internet-based cognitive–behavioural therapy for body dysmorphic disorder (BDD-NET): a feasibility study

    Science.gov (United States)

    Enander, Jesper; Ivanov, Volen Z; Andersson, Erik; Mataix-Cols, David; Ljótsson, Brjánn; Rück, Christian

    2014-01-01

    Objectives Cognitive–behavioural therapy (CBT) is an effective treatment for body dysmorphic disorder (BDD). However, most sufferers do not have access to this treatment. One way to increase access to CBT is to administer treatment remotely via the Internet. This study piloted a novel therapist-supported, Internet-based CBT program for BDD (BDD-NET). Design Uncontrolled clinical trial. Participants Patients (N=23) were recruited through self-referral and assessed face to face at a clinic specialising in obsessive–compulsive and related disorders. Suitable patients were offered secure access to BDD-NET. Intervention BDD-NET is a 12-week treatment program based on current psychological models of BDD that includes psychoeducation, functional analysis, cognitive restructuring, exposure and response prevention, and relapse prevention modules. A dedicated therapist provides active guidance and feedback throughout the entire process. Main outcome measure The clinician-administered Yale-Brown Obsessive Compulsive Scale for BDD (BDD-YBOCS). Symptom severity was assessed pretreatment, post-treatment and at the 3-month follow-up. Results BDD-NET was deemed highly acceptable by patients and led to significant improvements on the BDD-YBOCS (p=<0.001) with a large within-group effect size (Cohen's d=2.01, 95% CI 1.05 to 2.97). At post-treatment, 82% of the patients were classified as responders (defined as≥30% improvement on the BDD-YBOCS). These gains were maintained at the 3-month follow-up. Secondary outcome measures of depression, global functioning and quality of life also showed significant improvements with moderate to large effect sizes. On average, therapists spent 10 min per patient per week providing support. Conclusions The results suggest that BDD-NET has the potential to greatly increase access to CBT, at least for low-risk individuals with moderately severe BDD symptoms and reasonably good insight. A randomised controlled trial of BDD-NET is warranted

  18. DexterNet: An Open Platform for Heterogeneous Body Sensor Networks and Its Applications

    Science.gov (United States)

    2008-12-19

    body motions and the other measuring the ECG and respiratory patterns. At the second layer, called the personal network layer ( PNL ), the wireless body...sensors on a single subject communicate with a mobile base station, which supports Linux OS and the IEEE 802.15.4 protocol. The BSL and PNL functions...scalable, and can be reconfigured on-the-fly via SPINE. At the third layer, called the global network layer (GNL), multiple PNLs communicate with a remote

  19. NetGirls: the Internet, Facebook, and body image concern in adolescent girls.

    Science.gov (United States)

    Tiggemann, Marika; Slater, Amy

    2013-09-01

    The primary aim of the study was to examine the relationship between Internet exposure and body image concern in adolescent girls, with a particular focus on the social networking site of Facebook. A sample of 1,087 girls in the first two years (Years 8 and 9) of high school (aged 13-15 years) completed questionnaire measures of Internet consumption and body image concerns. The overwhelming majority of girls (95.9%) had access to the Internet in their home. Time spent on the Internet was significantly related to internalization of the thin ideal, body surveillance, and drive for thinness. Further, 75% of the girls had a Facebook profile, and spent an average of 1.5 hours there daily. Facebook users scored significantly more highly on all body image concern measures than non-users. It was concluded that the Internet represents a potent socio-cultural medium of relevance to the body image of adolescent girls. Copyright © 2013 Wiley Periodicals, Inc.

  20. Height and Body Composition Determine Arm Propulsive Force in Youth Swimmers Independent of a Maturation Stage

    Directory of Open Access Journals (Sweden)

    Moura Tatiane

    2014-10-01

    Full Text Available The aim of this study was to examine the relationship between anthropometric variables, body composition and propulsive force in swimmers aged 9-17 years. Anthropometric characteristics (body height and mass, sitting height, arm span, arm muscle area and body composition and the propulsive force of the arm (tethered swimming test were evaluated in 56 competitive male swimmers. Tanner’s stages of genital maturation (P1-5 were used. The data analysis included correlations and multiple linear regression. The propulsive force of the arm was correlated with body height (r = 0.34; p =0.013, arm span (r = 0.29; p =0.042, sitting height (r = 0.36; p =0.009, % body fat (r = 0.33; p =0.016, lean body mass (r = 0.34; p =0.015 and arm muscle area (r = 0.31; p =0.026. Using multiple linear regression models, the percent body fat and height were identified as significant predictors of the propulsive force of the arm after controlling for the maturation stage. This model explained 22% (R2 = 0.22 of associations. In conclusion, the propulsive force of swimmers was related to body height and percent body fat

  1. Analytical equation of state with three-body forces: application to noble gases.

    Science.gov (United States)

    del Río, Fernando; Díaz-Herrera, Enrique; Guzmán, Orlando; Moreno-Razo, José Antonio; Ramos, J Eloy

    2013-11-14

    We developed an explicit equation of state (EOS) for small non polar molecules by means of an effective two-body potential. The average effect of three-body forces was incorporated as a perturbation, which results in rescaled values for the parameters of the two-body potential. These values replace the original ones in the EOS corresponding to the two-body interaction. We applied this procedure to the heavier noble gases and used a modified Kihara function with an effective Axilrod-Teller-Muto (ATM) term to represent the two- and three-body forces. We also performed molecular dynamics simulations with two- and three-body forces. There was good agreement between predicted, simulated, and experimental thermodynamic properties of neon, argon, krypton, and xenon, up to twice the critical density and up to five times the critical temperature. In order to achieve 1% accuracy of the pressure at liquid densities, the EOS must incorporate the effect of ATM forces. The ATM factor in the rescaled two-body energy is most important at temperatures around and lower than the critical one. Nonetheless, the rescaling of two-body diameter cannot be neglected at liquid-like densities even at high temperature. This methodology can be extended straightforwardly to deal with other two- and three-body potentials. It could also be used for other nonpolar substances where a spherical two-body potential is still a reasonable coarse-grain approximation.

  2. Prediction of forces and moments on finned bodies at high angle of attack in transonic flow

    Energy Technology Data Exchange (ETDEWEB)

    Oberkampf, W. L.

    1981-04-01

    This report describes a theoretical method for the prediction of fin forces and moments on bodies at high angle of attack in subsonic and transonic flow. The body is assumed to be a circular cylinder with cruciform fins (or wings) of arbitrary planform. The body can have an arbitrary roll (or bank) angle, and each fin can have individual control deflection. The method combines a body vortex flow model and lifting surface theory to predict the normal force distribution over each fin surface. Extensive comparisons are made between theory and experiment for various planform fins. A description of the use of the computer program that implements the method is given.

  3. Euler-Poincare Reduction of Externall Forced Rigid Body Motion

    DEFF Research Database (Denmark)

    Wisniewski, Rafal; Kulczycki, P.

    2004-01-01

    If a mechanical system experiences symmetry, the Lagrangian becomes invariant under a certain group action. This property leads to substantial simplification of the description of movement. The standpoint in this article is a mechanical system affected by an external force of a control action....... Assuming that the system possesses symmetry and the configuration manifold corresponds to a Lie group, the Euler-Poincaré reduction breaks up the motion into separate equations of dynamics and kinematics. This becomes of particular interest for modelling, estimation and control of mechanical systems...

  4. The influence of surface irregularities upon the Van der Waals forces between macroscopic bodies

    NARCIS (Netherlands)

    Bree, J.L.M.J. van; Poulis, J.A.; Verhaar, B.J.; Schram, K.

    1974-01-01

    An expression is derived for the Van der Waals force between two semi-infinite bodies with small surface irregularities. Calculations are given both for the plane-plane and the plane-sphere configuration. The value of the correction from the surface irregularities upon the Van der Waals force is

  5. Dynamic forces over the interface between a seated human body and a rigid seat during vertical whole-body vibration.

    Science.gov (United States)

    Liu, Chi; Qiu, Yi; Griffin, Michael J

    2017-08-16

    Biodynamic responses of the seated human body are usually measured and modelled assuming a single point of vibration excitation. With vertical vibration excitation, this study investigated how forces are distributed over the body-seat interface. Vertical and fore-and-aft forces were measured beneath the ischial tuberosities, middle thighs, and front thighs of 14 subjects sitting on a rigid flat seat in three postures with different thigh contact while exposed to random vertical vibration at three magnitudes. Measures of apparent mass were calculated from transfer functions between the vertical acceleration of the seat and the vertical or fore-and-aft forces measured at the three locations, and the sum of these forces. When sitting normally or sitting with a high footrest, vertical forces at the ischial tuberosities dominated the vertical apparent mass. With feet unsupported to give increased thigh contact, vertical forces at the front thighs were dominant around 8Hz. Around 3-7Hz, fore-and-aft forces at the middle thighs dominated the fore-and-aft cross-axis apparent mass. Around 8-10Hz, fore-and-aft forces were dominant at the ischial tuberosities with feet supported but at the front thighs with feet unsupported. All apparent masses were nonlinear: as the vibration magnitude increased the resonance frequencies decreased. With feet unsupported, the nonlinearity in the apparent mass was greater at the front thighs than at the ischial tuberosities. It is concluded that when the thighs are supported on a seat it is not appropriate to assume the body has a single point of vibration excitation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Comparison of forced-air warming systems with upper body blankets using a copper manikin of the human body.

    Science.gov (United States)

    Bräuer, A; English, M J M; Steinmetz, N; Lorenz, N; Perl, T; Braun, U; Weyland, W

    2002-09-01

    Forced-air warming with upper body blankets has gained high acceptance as a measure for the prevention of intraoperative hypothermia. However, data on heat transfer with upper body blankets are not yet available. This study was conducted to determine the heat transfer efficacy of eight complete upper body warming systems and to gain more insight into the principles of forced-air warming. Heat transfer of forced-air warmers can be described as follows: Qdot;=h. DeltaT. A, where Qdot;= heat flux [W], h=heat exchange coefficient [W m-2 degrees C-1], DeltaT=temperature gradient between the blanket and surface [ degrees C], and A=covered area [m2]. We tested eight different forced-air warming systems: (1) Bair Hugger and upper body blanket (Augustine Medical Inc. Eden Prairie, MN); (2) Thermacare and upper body blanket (Gaymar Industries, Orchard Park, NY); (3) Thermacare (Gaymar Industries) with reusable Optisan upper body blanket (Willy Rüsch AG, Kernen, Germany); (4) WarmAir and upper body blanket (Cincinnati Sub-Zero Products, Cincinnati, OH); (5) Warm-Gard and single use upper body blanket (Luis Gibeck AB, Upplands Väsby, Sweden); (6) Warm-Gard and reusable upper body blanket (Luis Gibeck AB); (7) WarmTouch and CareDrape upper body blanket (Mallinckrodt Medical Inc., St. Luis, MO); and (8) WarmTouch and reusable MultiCover trade mark upper body blanket (Mallinckrodt Medical Inc.) on a previously validated copper manikin of the human body. Heat flux and surface temperature were measured with 11 calibrated heat flux transducers. Blanket temperature was measured using 11 thermocouples. The temperature gradient between the blanket and surface (DeltaT) was varied between -8 and +8 degrees C, and h was determined by linear regression analysis as the slope of DeltaT vs. heat flux. Mean DeltaT was determined for surface temperatures between 36 and 38 degrees C, as similar mean skin surface temperatures have been found in volunteers. The covered area was estimated to be 0

  7. Comparison of Ground Reaction Forces, Center of Pressure and Body Center of Mass Changes in the Voluntary, Semi-Voluntary and Involuntary Gait Termination in Healthy Young Men

    Directory of Open Access Journals (Sweden)

    behrooz teymourian

    2016-03-01

    Full Text Available Objective: The aim of this study was comparing the ground reaction forces, center of pressure and body center of mass changes in voluntary, semi-voluntary and involuntary gait termination in healthy young men. Methods: In this study, 12 young men performed termination of gait in three different patterns. The variable of peak antero-posterior and vertical forces in two directions at both limbs, the time to reach peak and average forces in every limb in both directions, the center of pressure displacement of medio-lateral and antero-posterior direction for each limb and the net center of pressure and the displacement of the center of mass motion in all three motion plates were recorded using motion analysis system and force plate.The repeated measurements test was used to compare three patterns of gait termination at significance level of p&le0.5. Results: The results showed a significant difference in variables of peak antero-posterior force, the time to reach peak antero-posterior force and mean antero-posterior forces of the leading limb, the peak antero-posterior force of the trialing limbs, the depth force of leading limbs, medio-lateral cop of leading limbs displacement and vertical displacement of the center of mass, among different patterns of gait termination. Conclusion: While walking, the probability of a fall or collision damage, when a sudden or unexpected stop is required, increases. Therefore, more coordination between neuromuscular systems is required.

  8. Lift Force Acting on Body in Liquid in the Vicinity of Boundary Executing Tangential Oscillations

    Science.gov (United States)

    Ivanova, A. A.; Kozlov, V. G.

    2014-10-01

    The average force acting on a cylindrical or spherical body placed near the boundary of cylindrical cavity filled with liquid and executing rotational vibrations is experimentally studied. The repulsive lift force acting on solid is found and measured using the method of body suspension in the gravity field. In horizontal cavity the repulsive force provides steady state of light cylinder near the upper boundary at a distance comparable with the thickness of the Stokes layer. The heavy sphere which hangs on thread repulses from the wall of vertical cylindrical cavity under torsional vibration. The dependence of the average lift force on the amplitude and frequency of vibrations and on distance between the body and the boundary has been investigated. Results are presented on the plane of dimensionless parameters. In the examined frequency range the lift force acting on cylinder decreases exponentially with distance from the boundary. Lift force acting on sphere decreases with distance and strongly depends on dimensionless frequency of vibration. Conclusion that lift force is generated by body oscillations excited by its viscous interaction with the oscillating boundary is done. The found phenomenon is important for control of inclusions under microgravity conditions.

  9. The body force in a three-dimensional Lame system identification and regularization

    DEFF Research Database (Denmark)

    Trong, Dang Duc; Phan, Thanh Nam; Thuc, Phung Trong

    2012-01-01

    Let a three-dimensional isotropic elastic body be described by the Lamé system with the body force of the form F(x, t) = (t)f (x), where is known. We consider the problem of determining the unknown spatial term f (x) of the body force when the surface stress history is given as the overdeterminat...... as the overdetermination. This inverse problem is ill-posed. Using the interpolation method and truncated Fourier series, we construct a regularized solution from approximate data and provide explicit error estimates....

  10. The Aerodynamic Forces on Slender Plane- and Cruciform-Wing and Body Combinations

    Science.gov (United States)

    Spreiter, John R

    1950-01-01

    The load distribution, forces, and moments are calculated theoretically for inclined slender wing-body combinations consisting of a slender body of revolution and either a plane or cruciform arrangement of low-aspect-ratio pointed wings. The results are applicable at subsonic and transonic speeds, and at supersonic speeds, provided the entire wing-body combination lies near the center of the Mach cone.

  11. High cable forces deteriorate pinch force control in voluntary-closing body-powered prostheses

    NARCIS (Netherlands)

    Hichert, M.; Abbink, D.A.; Kyberd, P.J.; Plettenburg, D.H.

    2017-01-01

    Background It is generally asserted that reliable and intuitive control of upper-limb prostheses requires adequate feedback of prosthetic finger positions and pinch forces applied to objects. Bodypowered prostheses (BPPs) provide the user with direct proprioceptive feedback. Currently available

  12. Comparison of forced-air warming systems with lower body blankets using a copper manikin of the human body.

    Science.gov (United States)

    Bräuer, A; English, M J M; Lorenz, N; Steinmetz, N; Perl, T; Braun, U; Weyland, W

    2003-01-01

    Forced-air warming has gained high acceptance as a measure for the prevention of intraoperative hypothermia. However, data on heat transfer with lower body blankets are not yet available. This study was conducted to determine the heat transfer efficacy of six complete lower body warming systems. Heat transfer of forced-air warmers can be described as follows:[1]Qdot;=h.DeltaT.A where Qdot; = heat transfer [W], h = heat exchange coefficient [W m-2 degrees C-1], DeltaT = temperature gradient between blanket and surface [ degrees C], A = covered area [m2]. We tested the following forced-air warmers in a previously validated copper manikin of the human body: (1) Bair Hugger and lower body blanket (Augustine Medical Inc., Eden Prairie, MN); (2) Thermacare and lower body blanket (Gaymar Industries, Orchard Park, NY); (3) WarmAir and lower body blanket (Cincinnati Sub-Zero Products, Cincinnati, OH); (4) Warm-Gard(R) and lower body blanket (Luis Gibeck AB, Upplands Väsby, Sweden); (5) Warm-Gard and reusable lower body blanket (Luis Gibeck AB); and (6) WarmTouch and lower body blanket (Mallinckrodt Medical Inc., St. Luis, MO). Heat flux and surface temperature were measured with 16 calibrated heat flux transducers. Blanket temperature was measured using 16 thermocouples. DeltaT was varied between -10 and +10 degrees C and h was determined by a linear regression analysis as the slope of DeltaT vs. heat flux. Mean DeltaT was determined for surface temperatures between 36 and 38 degrees C, because similar mean skin temperatures have been found in volunteers. The area covered by the blankets was estimated to be 0.54 m2. Heat transfer from the blanket to the manikin was different for surface temperatures between 36 degrees C and 38 degrees C. At a surface temperature of 36 degrees C the heat transfer was higher (between 13.4 W to 18.3 W) than at surface temperatures of 38 degrees C (8-11.5 W). The highest heat transfer was delivered by the Thermacare system (8.3-18.3 W), the

  13. Side force control on slender body by self-excited oscillation flag

    Directory of Open Access Journals (Sweden)

    Jian Zhai

    2016-09-01

    Full Text Available Strong asymmetrical vortices appear on the leeward of slender body at high angles of attack, which has very unfavorable effect on the stability and control of the aircraft. A method is developed to control the side force of slender body at high angles of attack, and is verified in wind tunnel. A thin-film triangular self-excited oscillation flag is fixed at the tip of the slender body model whose semi-apex angle is 10°. Side force is approximately linearly proportional to roll-setting angle of self-excited oscillation flag at high angles of attack, and the slop of fitting straight line obtained by the least square method is −0.158. The linear relationship between side force and roll-setting angle provides convenience for developing side force control law of slender body at high angles of attack. Experimental data shows that the side force coefficients vary linearly with roll-setting angles when a specific plastic self-excited oscillation flag is used as the control flag. The range of side force coefficient and roll-setting angle are, respectively, −3.2 to 3.0 and −20° to 20°. The device is simple, effective, and is of great potential in engineering application.

  14. Test of three-body contact Skyrme forces with spin excitations in deformed nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Sarriguren, P. [Consejo Superior de Investigaciones Cientificas (CSIC), Madrid (Spain). Inst. de Estructura de la Materia; Moya de Guerra, E. [Consejo Superior de Investigaciones Cientificas (CSIC), Madrid (Spain). Inst. de Estructura de la Materia; Nojarov, R. [Consejo Superior de Investigaciones Cientificas (CSIC), Madrid (Spain). Inst. de Estructura de la Materia

    1997-03-01

    Experimental data on spin M1 strength distributions in even-even rare-earth nuclei are compared to theoretical results of selfconsistent HF+RPA calculations with separable spin-spin residual interactions derived from the two alternative versions (two-body density-dependent and three-body contact terms) of the Skyrme force Sk3. It is shown that the two versions produce quite different spin M1 strength distributions, though they generate the same HF mean field. The experimental data favour the two-body over the three-body version of the Skyrme interactions Sk1-Sk6. (orig.)

  15. The effect of power law body forces on a thermally-driven flow between concentric rotating spheres

    Science.gov (United States)

    Macaraeg, M. G.

    1985-01-01

    A numerical study is conducted to determine the effect of power-law body forces on a thermally-driven axisymmetric flow field confined between concentric co-rotating spheres. This study is motivated by Spacelab geophysical fluid-flow experiments, which use an electrostatic force on a dielectric fluid to simulate gravity; this force exhibits a (1/r)sup 5 distribution. Meridional velocity is found to increase when the electrostatic body force is imposed, relative to when the body force is uniform. Correlation among flow fields with uniform, inverse-square, and inverse-quintic force fields is obtained using a modified Grashof number.

  16. The effect of power-law body forces on a thermally driven flow between concentric rotating spheres

    Science.gov (United States)

    Macaraeg, M. G.

    1986-01-01

    A numerical study is conducted to determine the effect of power-law body forces on a thermally-driven axisymmetric flow field confined between concentric co-rotating spheres. This study is motivated by Spacelab geophysical fluid-flow experiments, which use an electrostatic force on a dielectric fluid to simulate gravity; this force exhibits a (1/r)sup 5 distribution. Meridional velocity is found to increase when the electrostatic body force is imposed, relative to when the body force is uniform. Correlation among flow fields with uniform, inverse-square, and inverse-quintic force fields is obtained using a modified Grashof number.

  17. Tracking control of an underactuated rigid body with a coupling input force

    Directory of Open Access Journals (Sweden)

    Korczak Sebastian

    2014-09-01

    Full Text Available This paper presents a set of basic problems concerning the control of an underactuated dynamic system. Exemplary system of a planar rigid body with a coupling input force is described. Lie brackets method is used to show accessibility of the system. A tracking problem is solved with computed torque algorithm. The coupling force makes the convergence to zero of all state variables errors impossible. After numerical simulation, stability of the system is mentioned

  18. The effect of low force chiropractic adjustments for 4 weeks on body surface electromagnetic field.

    Science.gov (United States)

    Zhang, John; Snyder, Brian J

    2005-01-01

    To study the effects of 4 weeks of low-force chiropractic adjustments on body surface electromagnetic fields (EMFs). Thirty-five chiropractic students randomly assigned into control (17 subjects) and experimental groups (28 subjects). A triaxial fluxgate magnetometer was used for EMF detection. The subjects' body surface EMF was determined in the prone position before and after the chiropractic adjustment. A Toftness low-force chiropractic adjustment was applied to the cervical, thoracic, lumbar, and sacral areas as determined by the practitioner. Heart rate variability analysis was recorded once a week to determine autonomic nervous system activity in both the control and experimental groups. The EMF on the subjects' body surface decreased after chiropractic adjustment at the cervical, thoracic, lumbar, and sacral regions in all 6 visits during the 4-week treatment period. The EMF showed a downtrend over the 4-week period after the low-force adjustment. The same changes were not observed in the control group. The chiropractic adjustment group had a slight decrease in heart rate over the 4-week treatment period, and no significant change was observed in the control group. Heart rate variability analysis did not show consistent changes before and after the low-force adjustments during the treatment period. Low-force chiropractic adjustment in the cervical and thoracic areas resulted in a consistent reduction of the body surface EMF after 4 weeks of active treatment. No statistically significant differences were found in the heart rate and heart rate variability in the 4-week study.

  19. A three-body force model for the harmonic and anharmonic oscillator

    Directory of Open Access Journals (Sweden)

    A. A. Rajabi

    2005-06-01

    Full Text Available   We present a mathematical method to describe motion of a system based on 3 identical body forces. The 3-body forces are more easily introduced and treated within the hyperspherical harmonics. We have obtained an exact solution of the radial Schrödinger equation for a 3- body system in three dimensions. The interact potential  V  is assumed to depend on the hyperradius X only where X is a function of the Jacobi relative coordinates ρ and λ which are functions of the three identical particles, relative positions r12 , r23 and r31 . This method has been extensively used in nuclear and molecular physics. This work is interesting to those who are studying hadronic and bosonics physics and problems consisting three - body systems.

  20. The force function of two rigid celestial bodies in Delaunay-Andoyer variables

    Science.gov (United States)

    Zlenko, A. A.

    2016-01-01

    Two new expansions of the force function of two rigid celestial bodies of finite size and arbitrary shape are obtained in Delaunay-Andoyer variables with any degree of accuracy, in the form of a partial sum of an eight dimensional Fourier series. These expansions of the force function contain products of expressions for the momenta and Stokes constants in terms of sines and cosines, whose arguments are linear combinations of the Delaunay and Andoyer angular variables. These representations of the force function are compact and convenient for applications in various problems in celestial mechanics and astrodynamics.

  1. Forces of Space Non-Holonomity as the Necessary Condition for Motion of Space Bodies

    Directory of Open Access Journals (Sweden)

    Borissova L.

    2007-04-01

    Full Text Available The motion of a satellite in the gravitational field of the Earth is studied. The condition of weightlessness in terms of physical observable quantities is formulated. It is shown that the motion of all planets in the Solar system satisfy this condition. The exact solution of non-null geodesic lines describing the motion of a satellite in a state of weightlessness is obtained. It is shown that two kinds of rotational forces (forces of non-holonomity exist: the inner force is linked to a gravitational potential, the outer force changes geometric properties of a space. The latter force causes both anisotropy of the velocity of light and additional displacement of mass-bearing bodies.

  2. Wing and body motion and aerodynamic and leg forces during take-off in droneflies.

    Science.gov (United States)

    Chen, Mao Wei; Zhang, Yan Lai; Sun, Mao

    2013-12-06

    Here, we present a detailed analysis of the take-off mechanics in droneflies performing voluntary take-offs. Wing and body kinematics of the insects during take-off were measured using high-speed video techniques. Based on the measured data, the inertia force acting on the insect was computed and the aerodynamic force of the wings was calculated by the method of computational fluid dynamics. Subtracting the aerodynamic force and the weight from the inertia force gave the leg force. In take-off, a dronefly increases its stroke amplitude gradually in the first 10-14 wingbeats and becomes airborne at about the 12th wingbeat. The aerodynamic force increases monotonously from zero to a value a little larger than its weight, and the leg force decreases monotonously from a value equal to its weight to zero, showing that the droneflies do not jump and only use aerodynamic force of flapping wings to lift themselves into the air. Compared with take-offs in insects in previous studies, in which a very large force (5-10 times of the weight) generated either by jumping legs (locusts, milkweed bugs and fruit flies) or by the 'fling' mechanism of the wing pair (butterflies) is used in a short time, the take-off in the droneflies is relatively slow but smoother.

  3. Glenohumeral contact forces and muscle forces evaluated in wheelchair-related activities of daily living in able-bodied subjects versus subjects with paraplegia and tetraplegia

    NARCIS (Netherlands)

    van Drongelen, S.; van der Woude, L.H.V.; Janssen, T.W.J.; Angenot, E.D.L.; Chadwick, E.K.J.; Veeger, H.E.J.

    2005-01-01

    Objective: To estimate the differences in glenohumeral contact forces and shoulder muscle forces between able-bodied subjects and subjects with paraplegia and tetraplegia during wheelchair-related activities of daily living (ADLs). Design: Kinematics and external forces were measured during

  4. Glenohumeral contact forces and muscle forces evaluated in wheelchair-related activities of daily living in able-bodied subjects versus subjects with paraplegia and tetraplegia

    NARCIS (Netherlands)

    van Drongelen, S; van der Woude, LH; Janssen, Thomas W. J.; Angenot, EL; Chadwick, EK; Veeger, DirkJan (H. E. J.)

    Objective: To estimate the differences in glenohumeral contact forces and shoulder muscle forces between able-bodied subjects and subjects with paraplegia and tetraplegia during wheelchair-related activities of daily living (ADLs). Design: Kinematics and external forces were measured during

  5. Glenohumeral contact forces and muscle forces evaluated in wheelchair-related activities of daily living in able-bodied subjects versus subjects with paraplegia and tetraplegia

    NARCIS (Netherlands)

    van Drongelen, Stefan; van der Woude, Lucas H; Janssen, Thomas W; Angenot, Edmond L; Chadwick, Edward K; Veeger, Dirkjan H

    OBJECTIVE: To estimate the differences in glenohumeral contact forces and shoulder muscle forces between able-bodied subjects and subjects with paraplegia and tetraplegia during wheelchair-related activities of daily living (ADLs). DESIGN: Kinematics and external forces were measured during

  6. Effect of three-body forces on the lattice dynamics of noble metals

    Indian Academy of Sciences (India)

    Abstract. A simple method to generate an effective electron–ion interaction pseudopotential from the energy wave number characteristic obtained by first principles calculations has been suggested. This effective potential has been used, in third order perturbation, to study the effect of three-body forces on the lattice ...

  7. Forced desynchrony of circadian rhythms of body temperature and activity in rats

    NARCIS (Netherlands)

    Strijkstra, AM; Meerlo, P; Beersma, DGM

    1999-01-01

    The daily rhythm in body temperature is thought to be the result of the direct effects of activity and the effects of an endogenous circadian clock. Forced desynchrony (FD) is a tool used in human circadian rhythm research to disentangle endogenous and activity-related effects on daily rhythms. In

  8. Drawing and Using Free Body Diagrams: Why It May Be Better Not to Decompose Forces

    Science.gov (United States)

    Aviani, Ivica; Erceg, Nataša; Mešic, Vanes

    2015-01-01

    In this study we investigated how two different approaches to drawing free body diagrams influence the development of students' understanding of Newton's laws, including their ability to identify real forces. For this purpose we developed a 12-item two-tier multiple choice survey and conducted a quasiexperiment. This experiment included two groups…

  9. Effect of three-body forces on the lattice dynamics of noble metals

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 56; Issue 4. Effect of ... This effective potential has been used, in third order perturbation, to study the effect of three-body forces on the lattice dynamics of noble metals. ... Department of Physics, School of Sciences, Gujarat University, Ahmedabad 380 009, India ...

  10. iCub Whole-body Control through Force Regulation on Rigid Noncoplanar Contacts

    Directory of Open Access Journals (Sweden)

    Francesco eNori

    2015-03-01

    Full Text Available This paper details the implementation on the humanoid robot iCub of state-of-the-art algorithms for whole-body control. We regulate the forces between the robot and its surrounding environment to stabilize a desired robot posture. We assume that the forces and torques are exerted on rigid contacts. The validity of this assumption is guaranteed by constraining the contact forces and torques, e.g. the contact forces must belong to the associated friction cones. The implementation of this control strategy requires to estimate the external forces acting on the robot, and the internal joint torques. We then detail algorithms to obtain these estimations when using a robot with an iCub-like sensor set, i.e. distributed six-axis force-torque sensors and whole-body tactile sensors. A general theory for identifying the robot inertial parameters is also presented. From an actuation standpoint, we show how to implement a joint torque control in the case of DC brushless motors. In addition, the coupling mechanism of the iCub torso is investigated. The soundness of the entire control architecture is validated in a real scenario involving the robot iCub balancing and making contacts at both arms.

  11. Comparing efficacy of a sweep net and a dip method for collection of mosquito larvae in large bodies of water in South Africa [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Katherine K. Brisco

    2016-04-01

    Full Text Available In this study we tested an alternative method for collecting mosquito larvae called the sweep net catch method and compared its efficiency to that of the traditional dip method. The two methods were compared in various water bodies within Kruger National Park and Lapalala Wilderness area, South Africa. The sweep net catch method performed 5 times better in the collection of Anopheles larvae and equally as well as the dip method in the collection of Culex larvae (p =8.58 x 10-5. Based on 15 replicates the collector’s experience level did not play a significant role in the relative numbers of larvae collected using either method. This simple and effective sweep net catch method will greatly improve the mosquito larval sampling capacity in the field setting.

  12. Three-body correlations and conditional forces in suspensions of active hard disks

    Science.gov (United States)

    Härtel, Andreas; Richard, David; Speck, Thomas

    2018-01-01

    Self-propelled Brownian particles show rich out-of-equilibrium physics, for instance, the motility-induced phase separation (MIPS). While decades of studying the structure of liquids have established a deep understanding of passive systems, not much is known about correlations in active suspensions. In this work we derive an approximate analytic theory for three-body correlations and forces in systems of active Brownian disks starting from the many-body Smoluchowski equation. We use our theory to predict the conditional forces that act on a tagged particle and their dependence on the propulsion speed of self-propelled disks. We identify preferred directions of these forces in relation to the direction of propulsion and the positions of the surrounding particles. We further relate our theory to the effective swimming speed of the active disks, which is relevant for the physics of MIPS. To test and validate our theory, we additionally run particle-resolved computer simulations, for which we explicitly calculate the three-body forces. In this context, we discuss the modeling of active Brownian swimmers with nearly hard interaction potentials. We find very good agreement between our simulations and numerical solutions of our theory, especially for the nonequilibrium pair-distribution function. For our analytical results, we carefully discuss their range of validity in the context of the different levels of approximation we applied. This discussion allows us to study the individual contribution of particles to three-body forces and to the emerging structure. Thus, our work sheds light on the collective behavior, provides the basis for further studies of correlations in active suspensions, and makes a step towards an emerging liquid state theory.

  13. On the Evolution of Pulsatile Flow Subject to a Transverse Impulse Body Force

    Science.gov (United States)

    di Labbio, Giuseppe; Keshavarz-Motamed, Zahra; Kadem, Lyes

    2014-11-01

    In the event of an unexpected abrupt traffic stop or car accident, automotive passengers will experience an abrupt body deceleration. This may lead to tearing or dissection of the aortic wall known as Blunt Traumatic Aortic Rupture (BTAR). BTAR is the second leading cause of death in automotive accidents and, although quite frequent, the mechanisms leading to BTAR are still not clearly identified, particularly the contribution of the flow field. As such, this work is intended to provide a fundamental framework for the investigation of the flow contribution to BTAR. In this fundamental study, pulsatile flow in a three-dimensional, straight pipe of circular cross-section is subjected to a unidirectional, transverse, impulse body force applied on a strictly bounded volume of fluid. These models were simulated using the Computational Fluid Dynamics (CFD) software FLUENT. The evolution of fluid field characteristics was investigated during and after the application of the force. The application of the force significantly modified the flow field. The force induces a transverse pressure gradient causing the development of secondary flow structures that dissipate the energy added by the acceleration. Once the force ceases to act, these structures are carried downstream and gradually dissipate their excess energy.

  14. Streamwise-body-force-model for rapid simulation combining internal and external flow fields

    Directory of Open Access Journals (Sweden)

    Cui Rong

    2016-10-01

    Full Text Available A streamwise-body-force-model (SBFM is developed and applied in the overall flow simulation for the distributed propulsion system, combining internal and external flow fields. In view of axial stage effects, fan or compressor effects could be simplified as body forces along the streamline. These body forces which are functions of local parameters could be added as source terms in Navier-Stokes equations to replace solid boundary conditions of blades and hubs. The validation of SBFM with uniform inlet and distortion inlet of compressors shows that pressure performance characteristics agree well with experimental data. A three-dimensional simulation of the integration configuration, via a blended wing body aircraft with a distributed propulsion system using the SBFM, has been completed. Lift coefficient and drag coefficient agree well with wind tunnel test results. Results show that to reach the goal of rapid integrated simulation combining internal and external flow fields, the computational fluid dynamics method based on SBFM is reasonable.

  15. Forced oscillations of a body attached to a viscoelastic rod of fractional derivative type

    OpenAIRE

    Atanackovic, Teodor M.; Pilipovic, Stevan; Zorica, Dusan

    2012-01-01

    We study forced oscillations of a rod with a body attached to its free end so that the motion of a system is described by two sets of equations, one of integer and the other of the fractional order. To the constitutive equation we associate a single function of complex variable that plays a key role in finding the solution of the system and in determining its properties. This function could be defined for a linear viscoelastic bodies of integer/fractional derivative type.

  16. First-principles theory of van der Waals forces between macroscopic bodies.

    Science.gov (United States)

    Yannopapas, Vassilios; Vitanov, Nikolay V

    2007-09-21

    We present a first-principles method for the determination of the van der Waals interactions for a collection of finite-sized macroscopic bodies. The method is based on fluctuational electrodynamics and a rigorous multiple-scattering method for the electromagnetic field. As such, the method takes fully into account retardation, many-body, multipolar, and near-fields effects. By application of the method to the case of two metallic nanoparticles, we demonstrate the breakdown of the standard 1/r(2) distance law as the van der Waals force decays exponentially with distance when the nanoparticles are too close or too far apart.

  17. Application of stochastic variational method to 3-4 body systems with realistic nuclear force

    Energy Technology Data Exchange (ETDEWEB)

    Ohbayashi, Yoshihide [Niigata Univ. (Japan); Varga, K.; Suzuki, Yoshiyuki

    1997-05-01

    SVM (stochastic variational method) was applied to simulate triton and alpha with realistic nuclear force such as Reid V8 (RV8), Argonne V6, V8 (AV6 and aV8). 3-4 body systems were solved by about 300-400 dimensions and the results were agreed with the most accurate solution. Convergence of energy of 3-4 body systems was rapid by using AV6 and AV8 potential, but it was slow by RV8 with strong repulsive force core. The energy values using SVM and GFMC were almost same. Number of dimension to convert the energy of triton was decreased by refinement. (S.Y.)

  18. On symmetric equilibrium of an isothermal gas with a free boundary and a body force

    Directory of Open Access Journals (Sweden)

    2006-01-01

    Full Text Available The equation of symmetric equilibrium of an isothermal gas with an unknown boundary in the field of a body force is considered. Conditions for solvability and insolvability of the problem as well as for uniqueness and nonuniqueness of solutions are presented. Examples of finite, countable, or continual sets of solutions are constructed including equipotential ones. Static stability of solutions is analyzed too.

  19. Gravitational Self Force in a Schwarzschild Background and the Effective One Body Formalism

    OpenAIRE

    Damour, Thibault

    2009-01-01

    We discuss various ways in which the computation of conservative Gravitational Self Force (GSF) effects on a point mass moving in a Schwarzschild background can inform us about the basic building blocks of the Effective One-Body (EOB) Hamiltonian. We display the information which can be extracted from the recently published GSF calculation of the first-GSF-order shift of the orbital frequency of the last stable circular orbit, and we combine this information with the one recently obtained by ...

  20. 6Li in a three-body model with realistic Forces: Separable versus nonseparable approach

    Science.gov (United States)

    Hlophe, L.; Lei, Jin; Elster, Ch.; Nogga, A.; Nunes, F. M.

    2017-12-01

    Background: Deuteron induced reactions are widely used to probe nuclear structure and astrophysical information. Those (d ,p ) reactions may be viewed as three-body reactions and described with Faddeev techniques. Purpose: Faddeev equations in momentum space have a long tradition of utilizing separable interactions in order to arrive at sets of coupled integral equations in one variable. However, it needs to be demonstrated that their solution based on separable interactions agrees exactly with solutions based on nonseparable forces. Methods: Momentum space Faddeev equations are solved with nonseparable and separable forces as coupled integral equations. Results: The ground state of 6Li is calculated via momentum space Faddeev equations using the CD-Bonn neutron-proton force and a Woods-Saxon type neutron(proton)-4He force. For the latter the Pauli-forbidden S -wave bound state is projected out. This result is compared to a calculation in which the interactions in the two-body subsystems are represented by separable interactions derived in the Ernst-Shakin-Thaler (EST) framework. Conclusions: We find that calculations based on the separable representation of the interactions and the original interactions give results that agree to four significant figures for the binding energy, provided that energy and momentum support points of the EST expansion are chosen independently. The momentum distributions computed in both approaches also fully agree with each other.

  1. Effect of push handle height on net moments and forces on the musculoskeletal system during standardized wheelchair pushing tasks

    NARCIS (Netherlands)

    Van Der Woude, L H; Van Koningsbruggen, C M; Kroes, A L; Kingma, I

    1995-01-01

    The aim of this investigation was to analyze the external forces and biomechanical loading on the musculoskeletal system during wheelchair pushing, in relation to different push handle heights. In addition, recommendations for wheelchair pushing in accordance with push handle height are made. Eight

  2. Investigation of Body Force Effects on Flow Boiling Critical Heat Flux

    Science.gov (United States)

    Zhang, Hui; Mudawar, Issam; Hasan, Mohammad M.

    2002-11-01

    The bubble coalescence and interfacial instabilities that are important to modeling critical heat flux (CHF) in reduced-gravity systems can be sensitive to even minute body forces. Understanding these complex phenomena is vital to the design and safe implementation of two-phase thermal management loops proposed for space and planetary-based thermal systems. While reduced gravity conditions cannot be accurately simulated in 1g ground-based experiments, such experiments can help isolate the effects of the various forces (body force, surface tension force and inertia) which influence flow boiling CHF. In this project, the effects of the component of body force perpendicular to a heated wall were examined by conducting 1g flow boiling experiments at different orientations. FC-72 liquid was boiled along one wall of a transparent rectangular flow channel that permitted photographic study of the vapor-liquid interface at conditions approaching CHF. High-speed video imaging was employed to capture dominant CHF mechanisms. Six different CHF regimes were identified: Wavy Vapor Layer, Pool Boiling, Stratification, Vapor Counterflow, Vapor Stagnation, and Separated Concurrent Vapor Flow. CHF showed great sensitivity to orientation for flow velocities below 0.2 m/s, where very small CHF values where measured, especially with downflow and downward-facing heated wall orientations. High flow velocities dampened the effects of orientation considerably. Figure I shows representative images for the different CHF regimes. The Wavy Vapor Layer regime was dominant for all high velocities and most orientations, while all other regimes were encountered at low velocities, in the downflow and/or downward-facing heated wall orientations. The Interfacial Lift-off model was modified to predict the effects of orientation on CHF for the dominant Wavy Vapor Layer regime. The photographic study captured a fairly continuous wavy vapor layer travelling along the heated wall while permitting liquid

  3. SPH for impact force and ricochet behavior of water-entry bodies

    Science.gov (United States)

    Omidvar, Pourya; Farghadani, Omid; Nikeghbali, Pooyan

    The numerical modeling of fluid interaction with a bouncing body has many applications in scientific and engineering application. In this paper, the problem of water impact of a body on free-surface is investigated, where the fixed ghost boundary condition is added to the open source code SPHysics2D1 to rectify the oscillations in pressure distributions with the repulsive boundary condition. First, after introducing the methodology of SPH and the option of boundary conditions, the still water problem is simulated using two types of boundary conditions. It is shown that the fixed ghost boundary condition gives a better result for a hydrostatics pressure. Then, the dam-break problem, which is a bench mark test case in SPH, is simulated and compared with available data. In order to show the behavior of the hydrostatics forces on bodies, a fix/floating cylinder is placed on free surface looking carefully at the force and heaving profile. Finally, the impact of a body on free-surface is successfully simulated for different impact angles and velocities.

  4. Whole-Body Human Inverse Dynamics with Distributed Micro-Accelerometers, Gyros and Force Sensing

    Directory of Open Access Journals (Sweden)

    Claudia Latella

    2016-05-01

    Full Text Available Human motion tracking is a powerful tool used in a large range of applications that require human movement analysis. Although it is a well-established technique, its main limitation is the lack of estimation of real-time kinetics information such as forces and torques during the motion capture. In this paper, we present a novel approach for a human soft wearable force tracking for the simultaneous estimation of whole-body forces along with the motion. The early stage of our framework encompasses traditional passive marker based methods, inertial and contact force sensor modalities and harnesses a probabilistic computational technique for estimating dynamic quantities, originally proposed in the domain of humanoid robot control. We present experimental analysis on subjects performing a two degrees-of-freedom bowing task, and we estimate the motion and kinetics quantities. The results demonstrate the validity of the proposed method. We discuss the possible use of this technique in the design of a novel soft wearable force tracking device and its potential applications.

  5. Force-Velocity Relationship of Upper Body Muscles: Traditional Versus Ballistic Bench Press.

    Science.gov (United States)

    García-Ramos, Amador; Jaric, Slobodan; Padial, Paulino; Feriche, Belén

    2016-04-01

    This study aimed to (1) evaluate the linearity of the force-velocity relationship, as well as the reliability of maximum force (F0), maximum velocity (V0), slope (a), and maximum power (P0); (2) compare these parameters between the traditional and ballistic bench press (BP); and (3) determine the correlation of F0 with the directly measured BP 1-repetition maximum (1RM). Thirty-two men randomly performed 2 sessions of traditional BP and 2 sessions of ballistic BP during 2 consecutive weeks. Both the maximum and mean values of force and velocity were recorded when loaded by 20-70% of 1RM. All force-velocity relationships were strongly linear (r > .99). While F0 and P0 were highly reliable (ICC: 0.91-0.96, CV: 3.8-5.1%), lower reliability was observed for V0 and a (ICC: 0.49-0.81, CV: 6.6-11.8%). Trivial differences between exercises were found for F0 (ES: body maximal capabilities to generate force, velocity, and power.

  6. Effects of Three-Nucleon Forces and Two-Body Currents on Gamow-Teller Strengths

    Science.gov (United States)

    Ekström, A.; Jansen, G. R.; Wendt, K. A.; Hagen, G.; Papenbrock, T.; Bacca, S.; Carlsson, B.; Gazit, D.

    2014-12-01

    We optimize chiral interactions at next-to-next-to leading order to observables in two- and three-nucleon systems and compute Gamow-Teller transitions in 14C O,2422 using consistent two-body currents. We compute spectra of the daughter nuclei 14N and F,2422 via an isospin-breaking coupled-cluster technique, with several predictions. The two-body currents reduce the Ikeda sum rule, corresponding to a quenching factor q2≈0.84 - 0.92 of the axial-vector coupling. The half-life of 14C depends on the energy of the first excited 1+ state, the three-nucleon force, and the two-body current.

  7. Relations Between Lower Body Isometric Muscle Force Characteristics and Start Performance in Elite Male Sprint Swimmers

    Directory of Open Access Journals (Sweden)

    Igor Beretić

    2013-12-01

    Full Text Available The aim of the present study was twofold. The first aim was to examine the influence of absolute and relative lower body muscle force on kinematic component which determine the start performance. The second aim was to create multiregressional model which could use as a tool for swimming coaches with the purpose to start performance control and improvement. Twenty seven high-level trained male competitive swimmers all members of the Serbian National Youth and Senior Swimming Team (Age = 21.1 ± 4.3 yrs., Height = 1. 89 ± 0.10 m, Weight = 81.6 ± 8.4 kg, 50m freestyle - long course = 24.36 ± 0.86 s performed two trials of standing leg extensors isometric muscle force testing and three swimming start trials corresponding to 10m distance. The average start time significantly correlated with variables of leg extensors maximum voluntary force (Fmax, r = -0.559, p = 0.002, leg extensors relative muscle voluntary force (Frel, r = -0.727, p < 0.001, leg extensors specific rate of force development (RFD50%, r = -0.338, p = 0.047 and leg extensors relative value of specific rate of force development (RFD50%rel, r = -0.402, p = 0.040. Regression equation for t10m prediction was defined by following variables: maximum voluntary isometric force of leg extensors muscles at absolute and relative level (Fmax and Frel, as well as a specific rate of force development of the same muscle groups (RFD50% and RFD50%rel at absolute and relative level too with 74.4% of explained variance. Contractile abilities indicators of the leg extensors muscles included consideration: Fmax, RFD50%, Frel and RFD50%rel showed significant correlation with swimming start times on 10m. Additionally, the results suggest that swimmers, who possess greater isometric maximum force and specific rate of force development at absolute and relative levels, tend to be able to swim faster on initial 10m swim start perforamnce.

  8. Effectiveness of essential amino acid supplementation in stimulating whole body net protein anabolism is comparable between COPD patients and healthy older adults.

    Science.gov (United States)

    Jonker, Renate; Deutz, Nicolaas Ep; Erbland, Marcia L; Anderson, Paula J; Engelen, Mariëlle Pkj

    2017-04-01

    The development of effective nutritional strategies in support of muscle growth for patients with chronic obstructive pulmonary disease (COPD) remains challenging. Dietary essential amino acids (EAAs) are the main driver of postprandial net protein anabolism. In agreement, EAA supplements in healthy older adults are more effective than supplements with the composition of complete proteins. In patients with COPD it is still unknown whether complete protein supplements can be substituted with only EAAs, and whether they are as effective as in healthy older adults. According to a double-blind randomized crossover design, we examined in 23 patients with moderate to very severe COPD (age: 65±2 years, FEV1: 40±2% of predicted) and 19 healthy age-matched subjects (age: 64±2 years), whether a free EAA mixture with a high proportion (40%) of leucine (EAA mixture) stimulated whole body net protein gain more than a similar mixture of balanced free EAAs and non-EAAs as present in whey protein (TAA mixture). Whole body net protein gain and splanchnic extraction of phenylalanine (PHE) were assessed by continuous IV infusion of L-[ring-2H5]-PHE and L-[ring-2H2]-tyrosine, and enteral intake of L-[15N]-PHE (added to the mixtures). Besides an excellent positive linear relationship between PHE intake and net protein gain in both groups (r=0.84-0.91, Panabolism more than free amino acid supplements with the composition of complete proteins. Therefore, free EAA supplements may aid in the prevention and treatment of muscle wasting in this patient population. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. Lower extremity peak force and gait kinematics in individuals with inclusion body myositis

    Science.gov (United States)

    Davenport, Todd E.; Benson, Kimberly; Baker, Stephanie; Gracey, Christopher; Rakocevic, Goran; McElroy, Beverly; Dalakas, Marinos; Shrader, Joseph A.; Harris-Love, Michael O.

    2015-01-01

    Objective To determine the relationship between peak isometric muscle force and temporal characteristics of gait in individuals with sporadic inclusion body myositis (s-IBM). Patients and Methods An observational study of 42 individuals with s-IBM (12 female; age: 61.6 ±7.3 years [mean ±standard deviation]; disease duration 8.9 ±4.3 years) was conducted at a Federal hospital. Peak isometric force measurements for lower extremity (LE) muscle groups were obtained using quantitative muscle testing. Temporal characteristics of gait during habitual and fast walking conditions were measured using a portable gait analysis system. Results All observed muscle force values were significantly lower than predicted values (p gait speed and cadence were gait cycle time was 133% of normal, while gait speed and cadence were 58% and 78%, respectively, of normative literature values. Scaled LE peak muscle forces showed significant moderate correlations with the temporal gait variables. Weaker subjects demonstrated greater limitations in gait speed and cadence compared to stronger subjects (p gait. Conclusions Muscle weakness associated with s-IBM disease activity may contribute to diminished gait kinematics. Temporal features of gait are not substantially influenced by knee extensor weakness alone, as the knee flexors and ankle plantar flexors play a compensatory role in maintaining the walking ability of individuals with s-IBM. PMID:25201017

  10. A moving control volume approach to computing hydrodynamic forces and torques on immersed bodies

    Science.gov (United States)

    Nangia, Nishant; Johansen, Hans; Patankar, Neelesh A.; Bhalla, Amneet Pal Singh

    2017-10-01

    We present a moving control volume (CV) approach to computing hydrodynamic forces and torques on complex geometries. The method requires surface and volumetric integrals over a simple and regular Cartesian box that moves with an arbitrary velocity to enclose the body at all times. The moving box is aligned with Cartesian grid faces, which makes the integral evaluation straightforward in an immersed boundary (IB) framework. Discontinuous and noisy derivatives of velocity and pressure at the fluid-structure interface are avoided and far-field (smooth) velocity and pressure information is used. We re-visit the approach to compute hydrodynamic forces and torques through force/torque balance equations in a Lagrangian frame that some of us took in a prior work (Bhalla et al., 2013 [13]). We prove the equivalence of the two approaches for IB methods, thanks to the use of Peskin's delta functions. Both approaches are able to suppress spurious force oscillations and are in excellent agreement, as expected theoretically. Test cases ranging from Stokes to high Reynolds number regimes are considered. We discuss regridding issues for the moving CV method in an adaptive mesh refinement (AMR) context. The proposed moving CV method is not limited to a specific IB method and can also be used, for example, with embedded boundary methods.

  11. CellNetVis: a web tool for visualization of biological networks using force-directed layout constrained by cellular components.

    Science.gov (United States)

    Heberle, Henry; Carazzolle, Marcelo Falsarella; Telles, Guilherme P; Meirelles, Gabriela Vaz; Minghim, Rosane

    2017-09-13

    The advent of "omics" science has brought new perspectives in contemporary biology through the high-throughput analyses of molecular interactions, providing new clues in protein/gene function and in the organization of biological pathways. Biomolecular interaction networks, or graphs, are simple abstract representations where the components of a cell (e.g. proteins, metabolites etc.) are represented by nodes and their interactions are represented by edges. An appropriate visualization of data is crucial for understanding such networks, since pathways are related to functions that occur in specific regions of the cell. The force-directed layout is an important and widely used technique to draw networks according to their topologies. Placing the networks into cellular compartments helps to quickly identify where network elements are located and, more specifically, concentrated. Currently, only a few tools provide the capability of visually organizing networks by cellular compartments. Most of them cannot handle large and dense networks. Even for small networks with hundreds of nodes the available tools are not able to reposition the network while the user is interacting, limiting the visual exploration capability. Here we propose CellNetVis, a web tool to easily display biological networks in a cell diagram employing a constrained force-directed layout algorithm. The tool is freely available and open-source. It was originally designed for networks generated by the Integrated Interactome System and can be used with networks from others databases, like InnateDB. CellNetVis has demonstrated to be applicable for dynamic investigation of complex networks over a consistent representation of a cell on the Web, with capabilities not matched elsewhere.

  12. On some approximations of the resultant contact forces and their applications in rigid body dynamics

    Science.gov (United States)

    Kudra, Grzegorz; Szewc, Michał; Wojtunik, Igor; Awrejcewicz, Jan

    2016-10-01

    The work presents the possible applications and effectiveness of certain class of models of the resultant friction force and rolling resistance. The friction models are based on the integral model constructed under assumption of fully developed sliding on the plane contact area of general shape and any pressure distribution. Then the integral model of friction force and moment are approximated based on Padé approximants and their generalizations. These models are expected to be computationally effective in numerical simulations of rigid bodies with frictional contacts, such like billiard balls, Thompson top, the wobble stone and many others. In the present work two different examples of application of the developed contact models are presented and tested: a) a billiard ball rolling and sliding on the plane horizontal table; b) a full ellipsoid of revolution in contact with plane and horizontal base.

  13. Single-body lensed-fiber scanning probe actuated by magnetic force for optical imaging.

    Science.gov (United States)

    Min, Eun Jung; Na, Jihoon; Ryu, Seon Young; Lee, Byeong Ha

    2009-06-15

    We propose a fiber-based hand-held scanning probe suitable for the sample arm of an optical imaging system including optical coherence tomography. To achieve compactness, a single-body lensed-fiber and a solenoid actuator were utilized. The focusing lens of the probe was directly formed onto the distal end of a fiber, which eliminated the need for additional optical components and optical alignment. A ferromagnetic iron bead was glued onto the middle of the fiber to enable actuation by magnetic force, which allowed easy fabrication and good practicality. The fiber piece having the built-in fiber lens was forced to oscillate in its resonant frequency. With the implemented probe, optical coherence tomography images of a human fingertip and a pearl were obtained at an imaging speed of 30 frames/s over a scanning range of 4 mm.

  14. Forced-Air Warming Provides Better Control of Body Temperature in Porcine Surgical Patients

    Directory of Open Access Journals (Sweden)

    Brian T. Dent

    2016-09-01

    Full Text Available Background: Maintaining normothermia during porcine surgery is critical in ensuring subject welfare and recovery, reducing the risk of immune system compromise and surgical-site infection that can result from hypothermia. In humans, various methods of patient heating have been demonstrated to be useful, but less evaluation has been performed in techniques to prevent hypothermia perioperatively in pigs. Methods: We compared body temperature regulation during surgery before and after modification of the ambient temperature of the operating laboratories. Three different methods of heating were then compared; a standard circulating water mattress, a resistive fabric blanket, and a forced hot air system. The primary measure was percentage of temperature readings outside a specification range of 36.7–40.0 °C. Results: Tighter control of the ambient temperature while using a circulating water mattress reduced the occurrence of out-of-specification body temperature readings from 20.8% to 5.0%, with most of these the result of hypothermia. Use of a resistive fabric blanket further reduced out-of-specification readings to 1.5%, with a slight increase in the occurrence of hyperthermia. Use of a forced air system reduced out-of-specification readings to less 0.1%. Conclusions: Maintenance of normothermia perioperatively in pig can be improved by tightly controlling ambient temperatures. Use of a resistive blanket or a forced air system can lead to better control than a circulating water mattress, with the forced air system providing a faster response to temperature variations and less chance of hyperthermia.

  15. Forced-Air Warming Provides Better Control of Body Temperature in Porcine Surgical Patients.

    Science.gov (United States)

    Dent, Brian T; Stevens, Karla A; Clymer, Jeffrey W

    2016-09-09

    Background: Maintaining normothermia during porcine surgery is critical in ensuring subject welfare and recovery, reducing the risk of immune system compromise and surgical-site infection that can result from hypothermia. In humans, various methods of patient heating have been demonstrated to be useful, but less evaluation has been performed in techniques to prevent hypothermia perioperatively in pigs. Methods: We compared body temperature regulation during surgery before and after modification of the ambient temperature of the operating laboratories. Three different methods of heating were then compared; a standard circulating water mattress, a resistive fabric blanket, and a forced hot air system. The primary measure was percentage of temperature readings outside a specification range of 36.7-40.0 °C. Results: Tighter control of the ambient temperature while using a circulating water mattress reduced the occurrence of out-of-specification body temperature readings from 20.8% to 5.0%, with most of these the result of hypothermia. Use of a resistive fabric blanket further reduced out-of-specification readings to 1.5%, with a slight increase in the occurrence of hyperthermia. Use of a forced air system reduced out-of-specification readings to less 0.1%. Conclusions: Maintenance of normothermia perioperatively in pig can be improved by tightly controlling ambient temperatures. Use of a resistive blanket or a forced air system can lead to better control than a circulating water mattress, with the forced air system providing a faster response to temperature variations and less chance of hyperthermia.

  16. Transfer from table to wheelchair in men and women with spinal cord injury: coordination of body movement and arm forces

    National Research Council Canada - National Science Library

    Forslund, E B; Granström, A; Richard, Levi; Westgren, N; Hirschfeld, H

    2007-01-01

    ...: To investigate how men and women with spinal cord injury (SCI) perform transfers from table to wheelchair with regard to timing and magnitude of force generation beneath the hands and associated body movements.METHODS...

  17. The health and cost implications of high body mass index in Australian defence force personnel

    Directory of Open Access Journals (Sweden)

    Peake Jonathan

    2012-06-01

    Full Text Available Abstract Background Frequent illness and injury among workers with high body mass index (BMI can raise the costs of employee healthcare and reduce workforce maintenance and productivity. These issues are particularly important in vocational settings such as the military, which require good physical health, regular attendance and teamwork to operate efficiently. The purpose of this study was to compare the incidence of injury and illness, absenteeism, productivity, healthcare usage and administrative outcomes among Australian Defence Force personnel with varying BMI. Methods Personnel were grouped into cohorts according to the following ranges for (BMI: normal (18.5 − 24.9 kg/m2; n = 197, overweight (25–29.9 kg/m2; n = 154 and obese (≥30 kg/m2 with restricted body fat (≤28% for females, ≤24% for males (n = 148 and with no restriction on body fat (n = 180. Medical records for each individual were audited retrospectively to record the incidence of injury and illness, absenteeism, productivity, healthcare usage (i.e., consultation with medical specialists, hospital stays, medical investigations, prescriptions and administrative outcomes (e.g., discharge from service over one year. These data were then grouped and compared between the cohorts. Results The prevalence of injury and illness, cost of medical specialist consultations and cost of medical scans were all higher (p  Conclusions High BMI in the military increases healthcare usage, but does not disrupt workforce maintenance. The greater prevalence of injury and illness, greater healthcare usage and lower productivity in obese Australian Defence Force personnel is not related to higher levels of body fat.

  18. Force

    CERN Document Server

    Graybill, George

    2007-01-01

    Forces are at work all around us. Discover what a force is, and different kinds of forces that work on contact and at a distance. We use simple language and vocabulary to make this invisible world easy for students to ""see"" and understand. Examine how forces ""add up"" to create the total force on an object, and reinforce concepts and extend learning with sample problems.

  19. Poroelastic theory of consolidation in unsaturated soils incorporating gravitational body forces

    Science.gov (United States)

    Lo, Wei-Cheng; Chao, Nan-Chieh; Chen, Chu-Hui; Lee, Jhe-Wei

    2017-08-01

    The generalization of the poroelasticity theory of consolidation in unsaturated soils to well represent gravitational body forces is presented in the current study. Three partial differential equations featuring the displacement vector of the solid phase, along with the excess pore water and air pressures as dependent variables are derived, with coupling that occurs in the first-order temporal- and spatial- derivative terms. The former arises from viscous drag between solid and fluid, whereas the latter is attributed to the presence of gravity. Given the physically-consistent initial and boundary conditions, these coupled equations are numerically solved under uniaxial strain as a representative example. Our results reveal that variations in the excess pore water pressure due to the existence of gravitational forces increase with soil depth, but these variations are not significant if the soil layer is not sufficiently long. A dimensionless parameter is defined theoretically to quantify the impact of those forces on the final total settlement. This impact is shown to become greater as the soil layer is less stiff and has more length, and bears an inversely-proportional trend with initial water saturation.

  20. The use of electromagnetic body forces to enhance the quality of laser welds

    Science.gov (United States)

    Ambrosy, Guenter; Berger, P.; Huegel, H.; Lindenau, D.

    2003-11-01

    The use of electromagnetic body forces in laser beam welding of aluminum alloys is a new method to shape the geometry and to enhance the quality of the weld seams. In this new approach, electromagnetic volume forces are utilized by applying magnetic fields and electric currents of various origins. Acting in the liquid metal, they directly affect the flow field and can lead to favourable conditions for the melt dynamics and energy coupling. Numerous welds with full and partial penetration using both CO2 and Nd:YAG lasers demonstrate that this method directly influences the seam geometry and top-bead topography as well as the penetration depth and the evolution of pores and cracks. In the case of full penetration, it is also possible to lift or to lower the weld pool. The method, therefore, can be used to shape the geometry and to enhance the quality of the weld seam. Depending on the orientation of an external magnetic field, significant impacts are achieved in CO2 welding, even without an external current: the shape of the cross-sectional area can be increased of up to 50% and also the seam width is changed. Whereas for such conditions with Nd:YAG lasers no significant effect could be observed, it turned out that, when an external electric current is applied, similar effects are present with both wavelengths. In further investigations, the effect of electromagnetic body forces resulting from the interaction of an external current and its self-induced magnetic field was studied. Hereby, the current was fed into the workpiece via a tungsten electrode or a filler wire. The resulting phenomena are the same independent from wavelength and means of current feed.

  1. Extraction of user's navigation commands from upper body force interaction in walker assisted gait

    Directory of Open Access Journals (Sweden)

    Pons José L

    2010-08-01

    Full Text Available Abstract Background The advances in technology make possible the incorporation of sensors and actuators in rollators, building safer robots and extending the use of walkers to a more diverse population. This paper presents a new method for the extraction of navigation related components from upper-body force interaction data in walker assisted gait. A filtering architecture is designed to cancel: (i the high-frequency noise caused by vibrations on the walker's structure due to irregularities on the terrain or walker's wheels and (ii the cadence related force components caused by user's trunk oscillations during gait. As a result, a third component related to user's navigation commands is distinguished. Results For the cancelation of high-frequency noise, a Benedict-Bordner g-h filter was designed presenting very low values for Kinematic Tracking Error ((2.035 ± 0.358·10-2 kgf and delay ((1.897 ± 0.3697·101ms. A Fourier Linear Combiner filtering architecture was implemented for the adaptive attenuation of about 80% of the cadence related components' energy from force data. This was done without compromising the information contained in the frequencies close to such notch filters. Conclusions The presented methodology offers an effective cancelation of the undesired components from force data, allowing the system to extract in real-time voluntary user's navigation commands. Based on this real-time identification of voluntary user's commands, a classical approach to the control architecture of the robotic walker is being developed, in order to obtain stable and safe user assisted locomotion.

  2. Validation of a new whole-body cryotherapy chamber based on forced convection.

    Science.gov (United States)

    Bouzigon, Romain; Arfaoui, Ahlem; Grappe, Frédéric; Ravier, Gilles; Jarlot, Benoit; Dugue, Benoit

    2017-04-01

    Whole-body cryotherapy (WBC) and partial-body cryotherapy (PBC) are two methods of cold exposure (from -110 to -195°C according to the manufacturers). However, temperature measurement in the cold chamber during a PBC exposure revealed temperatures ranging from -25 to -50°C next to the skin of the subjects (using isolating layer placed between the sensor and the skin). This discrepancy is due to the human body heat transfer. Moreover, on the surface of the body, an air layer called the boundary layer is created during the exposure and limits heat transfer from the body to the cabin air. Incorporating forced convection in a chamber with a participant inside could reduce this boundary layer. The aim of this study was to explore the use of a new WBC technology based on forced convection (frontal unilateral wind) through the measurement of skin temperature. Fifteen individuals performed a 3-min WBC exposure at -40°C with an average wind speed of 2.3ms-1. The subjects wore a headband, a surgical mask, underwear, gloves and slippers. The skin temperature of the participants was measured with a thermal camera just before exposure, just after exposure and at 1, 3, 5, 10, 15 and 20min after exposure. Mean skin temperature significantly dropped by 11°C just after exposure (p<0.001) and then significantly increased during the 20-min post exposure period (p<0.001). No critically low skin temperature was observed at the end of the cold exposure. This decrease was greater than the mean decreases in all the cryosauna devices with reported exposures between -140°C and -160°C and those in two other WBC devices with reported exposures between -60°C and -110°C. The use of this new technology provides the ability to reach decreases in skin temperature similar to other technologies. The new chamber is suitable and relevant for use as a WBC device. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Body mass penalties in the physical fitness tests of the Army, Air Force, and Navy.

    Science.gov (United States)

    Vanderburgh, Paul M; Crowder, Todd A

    2006-08-01

    Recent research has empirically documented a consistent penalty against heavier service members for events identical or similar to those in the physical fitness tests of the Army, Air Force, and Navy. These penalties, which are not related to body fatness, are based on biological scaling models and have a physiological basis. Using hypothetical cases, we quantified the penalties for men, with body mass of 60 vs. 90 kg, and women, 45 vs. 75 kg, to be 15% to 20% for the fitness tests of these three services. Such penalties alone can adversely affect awards and promotions for heavier service members. To deal equitably with these penalties in a practical manner, we offer two recommendations, i.e., (1) implementation of revised fitness tests with balanced events, in which the penalties of one event for heavier service members are balanced by an equal and opposite bias against lighter service members, or (2) development of correction factors that can be multiplied by raw scores to yield adjusted scores free of body mass bias.

  4. Scattering-matrix approach to Casimir-Lifshitz force and heat transfer out of thermal equilibrium between arbitrary bodies

    Energy Technology Data Exchange (ETDEWEB)

    Messina, Riccardo [LNE-SYRTE, Observatoire de Paris, CNRS UMR 8630, UPMC, 61 avenue de l' Observatoire, F-75014 Paris (France); Antezza, Mauro [Universite Montpellier 2, Laboratoire Charles Coulomb UMR 5221, F-34095, Montpellier (France); CNRS, Laboratoire Charles Coulomb UMR 5221, F-34095, Montpellier (France)

    2011-10-15

    We study the radiative heat transfer and the Casimir-Lifshitz force occurring between two bodies in a system out of thermal equilibrium. We consider bodies of arbitrary shape and dielectric properties, held at two different temperatures and immersed in environmental radiation at a third different temperature. We derive explicit closed-form analytic expressions for the correlations of the electromagnetic field and for the heat transfer and Casimir-Lifshitz force in terms of the bodies' scattering matrices. We then consider some particular cases which we investigate in detail: the atom-surface and the slab-slab configurations.

  5. Comparison of Body Composition Metrics for United States Air Force Airmen.

    Science.gov (United States)

    Griffith, J R; White, Edward D; Fass, R David; Lucas, Brandon M

    2018-01-22

    The United States Air Force currently uses AFI 36-2905 for cardiovascular fitness standards and evaluation. Regarding its fitness test, the Air Force considers waist circumference (WC) twice as important as push-ups or sit-ups. Because of this weighting, one assumes that the Air Force considers WC relatively correlated with overall fitness or at least cardiovascular fitness. To our knowledge, the Air Force has not considered on a large scale how body mass index (BMI), height-to-weight ratio (H-W), or waist-to-height ratio (WHtR) compares with WC with respect to its fitness test. Using a 5.38 million record database from the Air Force Fitness Management System, we evaluated how WC, BMI, WHtR, and H-W correlate with fitness as assessed by the 1.5-mile run in addition to total fitness, which incorporates the 1.5-mile run time, number of push-ups and sit-ups. As this previously collected data were anonymous to us, this study fell under the definition of exempt status and approved by the institutional review board overseeing Joint Base San Antonio. For each waist metric, we performed a simple ordinary least squares regression to ascertain the correlation between that particular metric and either run time or total fitness; when incorporating more than one explanatory variable or covariate (to control for age and/or sex), we performed multiple ordinary least squares regressions. Due to the large database size and to mitigate against a type I error, we used an alpha of 0.001 for all statistical hypothesis tests. Approximately 18% of the 5.38 million records belonged to women. With respect to sex differences, males appeared noticeably faster and performed more push-ups on average than females. The number of sit-ups completed was more comparable, with males having a slight advantage. Males also appeared to have larger WC, BMI, H-W, and WHtR measurements. We compared the ordinary least squares results between WC, H-W, WHtR, and BMI and ranked them by R2. Models varied in R2

  6. Microscopic optical potential with two and three body forces for nucleon–nucleus scattering

    Directory of Open Access Journals (Sweden)

    Gambhir Y.K.

    2014-03-01

    Full Text Available The proton - nucleus optical potentials generated by folding the calculated complex, density and energy dependent g- matrices (with and without three-body forces (TBF: Urbana IX (UVIX and TNI over the target nucleon density distributions obtained from the relativistic mean field theory, are used for the calculation of the differential cross section dσ / dθ , polarization Ay , spin rotation function (Q. for 65 and 200 MeV polarized proton incident on 40Ca and 208Pb . The agreement with the experiment is rather impressive. It is found that the inclusion of TBF (Urbana IX UVIX and TNI reduces the strength of the central part of the optical potential in the nuclear interior and affects the calculated spin-orbit potential only marginally and leads to an improvement in the agreement with the corresponding experimental results.

  7. Comparison of lumbar force between pubertal and post-pubertal adolescents: interference of physical growth, body fat and lifestyle.

    Directory of Open Access Journals (Sweden)

    Mikael Seabra Moraes

    2018-01-01

    Full Text Available Abstract Aim: To compare performance in the lumbar force test in pubertal and post-pubertal adolescents by controlling the interference of physical growth, body fat, screen time and physical activity. Methods: A cross-sectional study with 933 adolescents (492 girls aged 14-19 from the city of São José, Brazil. Lumbar strength was assessed using the isometric lumbar extension test proposed by the Canadian Society of Exercise Physiology. Sexual maturation was classified according to Tanner’s criteria. Physical growth variables (age, body weight, stature, BMI, body fat (triceps and subscapular skinfolds, sedentary behavior based on screen time and overall physical activity were controlled in the Analysis of Covariance (ANCOVA, with a significance level of 5%. Results: Post-pubertal boys presented higher lumbar force compared to pubertal ones only when interference of BMI, body fat, screen time and physical activity was controlled. Pubertal girls presented higher lumbar force compared to post-pubertal ones, both when controlling the analysis for the studied variables and when not controlled by them. Conclusion: BMI, body fat, screen time and physical activity interfere in the difference in lumbar strength of boys, in which post-pubertal boys presented better performance in lumbar force compared to pubertal ones. Regardless of interference or not of these variables, pubertal girls presented better performance in lumbar force when compared to post-pubertal ones.

  8. Important role of three-body repulsive force effect in nuclear reactions

    Directory of Open Access Journals (Sweden)

    Yamamoto Y.

    2010-04-01

    Full Text Available The effect of three-body force (TBF is studied in nucleus-nucleus elastic scattering on the basis of Brueckner theory for nucleon-nucleon (NN effective interaction (complex G matrix in the nuclear matter. A new G matrix called CEG07 proposed recently by the present authors includes the TBF effect and reproduces a realistic saturation curve in the nuclear matter, and is shown to well reproduce proton-nucleus elastic scattering. The microscopic optical potential for nucleus-nucleus system is obtained by folding the G matrix with nucleon density distributions in colliding nuclei. We first analyze the 16O + 16O elastic scattering at E/A = 70 MeV in detail. The observed cross sections are nicely reproduced up to the most backward scattering angles only when the TBF effect is included. The effects of the three-body attraction (TBA and three-body repulsion (TBR are also analyzed. The TBR contribution has an important role in nucleus-nucleus elastic scattering. The CEG07 G matrix is also tested in the elastic scattering of 16O by the 12C, 28Si and 40Ca targets at E/A = 93.9 MeV, and in the elastic scattering of 12C by the 12C target at E/A = 135 MeV with a great success. The decisive effect of the TBF is clearly seen also in those systems.

  9. Normative ground reaction force data for able-bodied and trans-tibial amputee children during running.

    Science.gov (United States)

    Engsberg, J R; Lee, A G; Tedford, K G; Harder, J A

    1993-08-01

    The purpose of this investigation was to develop normative ground reaction force data for able-bodied (AB) and trans-tibial amputee (TTA) children during running. Two hundred AB (mean age 9.4 years, range 7-12) and 21 TTA (mean age 11.1 years, range 5-17) children ran (2.2 m/s +/- 10%) over a force platform. Ground reaction force data were normalized, averaged within groups and plotted to produce force-time curves characterizing the different leg types (i.e. able-bodied, non-prosthetic and prosthetic). In addition, discrete variables characterizing the leg type differences were determined. One way ANOVA determined significant differences between variables and a TukeyB Post Hoc analysis defined which variables were significantly different (p running and can be used for comparison with other groups of children.

  10. Influence of spinal disc translational stiffness on the lumbar spinal loads, ligament forces and trunk muscle forces during upper body inclination.

    Science.gov (United States)

    Arshad, Rizwan; Zander, Thomas; Bashkuev, Maxim; Schmidt, Hendrik

    2017-08-01

    Inverse dynamic musculoskeletal human body models are commonly used to predict the spinal loads and trunk muscle forces. These models include rigid body segments, mechanical joints, active and passive structural components such as muscles, tendons and ligaments. Several studies used simple definition of lumbar spinal discs idealized as spherical joints with infinite translational stiffness. The aim of the current sensitivity study was to investigate the influence of disc translational stiffness (shear and compressive stiffness) on the joint kinematics and forces in intervertebral discs (L1-L5), trunk muscles and ligaments for an intermediately flexed position (55°). Based on in vitro data, a range of disc shear stiffness (100-200N/mm) and compressive stiffness (1900-2700N/mm) was considered in the model using the technique of force dependent kinematics (FDK). Range of variation in spinal loads, trunk muscle forces and ligaments forces were calculated (with & without load in hands) and compared with the results of reference model (RM) having infinite translational stiffness. The discs' centers of rotation (CoR) were computed for L3-L4 and L4-L5 motion segments. Between RM and FDK models, maximum differences in compressive forces were 7% (L1-L2 & L2-L3), 8% (L3-L4) and 6% (L4-L5) whereas in shear forces 35% (L1-L2), 47% (L2-L3), 45% (L3-L4) and more than 100% in L4-L5. Maximum differences in the sum of global and local muscle forces were approximately 10%, whereas in ligament forces were 27% (supraspinous), 40% (interspinous), 56% (intertransverse), 58% (lig. flavum) and 100% (lig. posterior). The CoRs were predicted posteriorly, below (L3-L4) and in the disc (L4-L5). FDK model predicted lower spinal loads, ligament forces and varied distribution of global and local muscle forces. Consideration of translational stiffnesses influenced the model results and showed increased differences with lower stiffness values. Copyright © 2017 IPEM. Published by Elsevier Ltd. All

  11. Net Locality

    DEFF Research Database (Denmark)

    de Souza e Silva, Adriana Araujo; Gordon, Eric

    Provides an introduction to the new theory of Net Locality and the profound effect on individuals and societies when everything is located or locatable. Describes net locality as an emerging form of location awareness central to all aspects of digital media, from mobile phones, to Google Maps...... of emerging technologies, from GeoCities to GPS, Wi-Fi, Wiki Me, and Google Android....

  12. Net Neutrality

    DEFF Research Database (Denmark)

    Savin, Andrej

    2017-01-01

    Repealing “net neutrality” in the US will have no bearing on Internet freedom or security there or anywhere else.......Repealing “net neutrality” in the US will have no bearing on Internet freedom or security there or anywhere else....

  13. Experimental study of the two-body spin-orbit force in nuclei.

    Science.gov (United States)

    Burgunder, G; Sorlin, O; Nowacki, F; Giron, S; Hammache, F; Moukaddam, M; de Séréville, N; Beaumel, D; Càceres, L; Clément, E; Duchêne, G; Ebran, J P; Fernandez-Dominguez, B; Flavigny, F; Franchoo, S; Gibelin, J; Gillibert, A; Grévy, S; Guillot, J; Lepailleur, A; Matea, I; Matta, A; Nalpas, L; Obertelli, A; Otsuka, T; Pancin, J; Poves, A; Raabe, R; Scarpaci, J A; Stefan, I; Stodel, C; Suzuki, T; Thomas, J C

    2014-01-31

    Energies and spectroscopic factors of the first 7/2-, 3/2-, 1/2-, and 5/2- states in the (35)Si21 nucleus were determined by means of the (d, p) transfer reaction in inverse kinematics at GANIL using the MUST2 and EXOGAM detectors. By comparing the spectroscopic information on the Si35 and S37 isotones, a reduction of the p3/2-p1/2 spin-orbit splitting by about 25% is proposed, while the f7/2-f5/2 spin-orbit splitting seems to remain constant. These features, derived after having unfolded nuclear correlations using shell model calculations, have been attributed to the properties of the two-body spin-orbit interaction, the amplitude of which is derived for the first time in an atomic nucleus. The present results, remarkably well reproduced by using several realistic nucleon-nucleon forces, provide a unique touchstone for the modeling of the spin-orbit interaction in atomic nuclei.

  14. Body armour: the effect of load, exercise and distraction on landing forces.

    Science.gov (United States)

    Dempsey, Paddy C; Handcock, Phil J; Rehrer, Nancy J

    2014-01-01

    We investigated the effect of added load and intense exercise on jump and landing performance and ground reaction force (GRF) during landings where attentional demand was varied. Fifty-two males (37 ± 9.2 years, 180.7 ± 6.1 cm, 90.2 ± 11.6 kg, maximal aerobic fitness (VO(₂max)) 50 ± 8.5 ml (.) kg(-1 .) min(-1), BMI 27.6 ± 3.1, mean ± s) completed a VO(₂max) test. Experimental sessions were completed (≥4 days in between) in a randomised counterbalanced order, one while wearing body armour and appointments (loaded) and one without load (unloaded). A vertical jump, a drop landing concentrating on safe touchdown, a drop jump and a drop landing with an attentional distraction were performed. These were repeated 1 min after a 5-min treadmill run. Mean jump height decreased by 12% (P < 0.001) with loading and a further by 6% following the running task. Peak GRFs were increased by 13-19% with loading (P < 0.001) depending on the landing task demands and a further by 4-9% following intense exercise. The distracted drop landing had significantly higher GRFs compared to all other landings. Results demonstrate that added load impacts on jumping and landing performance, an effect that is amplified by prior intense exercise, and distraction during landing. Such increases in GRF apply to police officer performance in their duties and may increase the risk of injury.

  15. Force Sensing Resistor and Evaluation of Technology for Wearable Body Pressure Sensing

    Directory of Open Access Journals (Sweden)

    Davide Giovanelli

    2016-01-01

    Full Text Available Wearable technologies are gaining momentum and widespread diffusion. Thanks to devices such as activity trackers, in form of bracelets, watches, or anklets, the end-users are becoming more and more aware of their daily activity routine, posture, and training and can modify their motor-behavior. Activity trackers are prevalently based on inertial sensors such as accelerometers and gyroscopes. Loads we bear with us and the interface pressure they put on our body also affect posture. A contact interface pressure sensing wearable would be beneficial to complement inertial activity trackers. What is precluding force sensing resistors (FSR to be the next best seller wearable? In this paper, we provide elements to answer this question. We build an FSR based on resistive material (Velostat and printed conductive ink electrodes on polyethylene terephthalate (PET substrate; we test its response to pressure in the range 0–2.7 kPa. We present a state-of-the-art review, filtered by the need to identify technologies adequate for wearables. We conclude that the repeatability is the major issue yet unsolved.

  16. The Performative Force of Bodies: Affective Realism in Contemporary Brazilian Cinema

    Directory of Open Access Journals (Sweden)

    Alessandra Brandão

    2015-10-01

    Full Text Available http://dx.doi.org/10.5007/2175-8026.2015v68n3p161 This paper traces the emergence of a younger generation of Brazilian filmmakers whose works bypass traditional themes in Brazilian cinema such as urban violence and historical revisionism to engage in post-identity politics avoiding narratives of nation, class and gender. One of the most prominent features in these recent works is a questioning of the status of the image, which vacillates between fiction and documentary without a point of resolution. This vacillation can be understood in terms of the performative nature of films like The Monsters, The Residents, The Earth Giveth, The Earth Taketh and Avenida Brasilia Formosa. Such films are centered around improvisations that open up the image to the real. Therefore, these films produce a space between fiction and documentary, between reality and artifice that is productive and politically charged. This proposal aims at discussing this “Brand New” Brazilian Cinema (Novísssimo Cinema Brasileiro and the performative force of bodies in its affective realism. No longer a referent for a sociological truth about Brazilian society, realism is taken as something that the image does, i. e., as an affect that challenges the viewer's response-ability.

  17. Do body weight and gender shape the work force? The case of Iceland.

    Science.gov (United States)

    Asgeirsdottir, Tinna Laufey

    2011-03-01

    Most studies of the relationship between body weight - as well as its corollary, beauty - and labor-market outcomes have indicated that it is a function of a gender bias, the negative relationship between excess weight or obesity and labor-market outcomes being greater for women than for men. Iceland offers an exceptional opportunity to examine this hypothesis, given that it scores relatively well on an index of gender equality comprising economic, political, educational, labor-market, and health-based criteria. Equipped with an advanced level of educational attainment, on average, women are well represented in Iceland's labor force. When it comes to women's presence in the political sphere, Iceland is out of the ordinary as well; that Icelanders were the first in the world to elect a woman to be president may suggest a relatively gender-blind assessment in the labor market. In the current study, survey data collected by Gallup Iceland in 2002 are used to examine the relationship between weight and employment within this political and social setting. Point estimates indicate that, despite apparently lesser gender discrimination in Iceland than elsewhere, the bias against excess weight and obesity remains gender-based, showing a slightly negative relationship between weight and the employment rate of women, whereas a slightly positive relationship was found for men. Copyright © 2010 Elsevier B.V. All rights reserved.

  18. Gravitational self-force in a Schwarzschild background and the effective one-body formalism

    Science.gov (United States)

    Damour, Thibault

    2010-01-01

    We discuss various ways in which the computation of conservative gravitational self-force (GSF) effects on a point mass moving in a Schwarzschild background can inform us about the basic building blocks of the effective one-body (EOB) Hamiltonian. We display the information which can be extracted from the recently published GSF calculation of the first-GSF-order shift of the orbital frequency of the last stable circular orbit, and we combine this information with the one recently obtained by comparing the EOB formalism to high-accuracy numerical relativity data on coalescing binary black holes. The information coming from GSF data helps to break the degeneracy (among some EOB parameters) which was left after using comparable-mass numerical relativity data to constrain the EOB formalism. We suggest various ways of obtaining more information from GSF computations: either by studying eccentric orbits, or by focusing on a special zero-binding zoom-whirl orbit. We show that logarithmic terms start entering the post-Newtonian expansions of various (EOB and GSF) functions at the fourth post-Newtonian level, and we analytically compute the first logarithm entering a certain, gauge-invariant “redshift” GSF function (defined along the sequence of circular orbits).

  19. Gravitational Self Force in a Schwarzschild Background and the Effective One Body Formalism

    CERN Document Server

    Damour, Thibault

    2009-01-01

    We discuss various ways in which the computation of conservative Gravitational Self Force (GSF) effects on a point mass moving in a Schwarzschild background can inform us about the basic building blocks of the Effective One-Body (EOB) Hamiltonian. We display the information which can be extracted from the recently published GSF calculation of the first-GSF-order shift of the orbital frequency of the last stable circular orbit, and we combine this information with the one recently obtained by comparing the EOB formalism to high-accuracy numerical relativity (NR) data on coalescing binary black holes. The information coming from GSF data helps to break the degeneracy (among some EOB parameters) which was left after using comparable-mass NR data to constrain the EOB formalism. We suggest various ways of obtaining more information from GSF computations: either by studying eccentric orbits, or by focussing on a special zero-binding zoom-whirl orbit. We show that logarithmic terms start entering the post-Newtonian ...

  20. Experimental study of the two-body spin-orbit force

    CERN Document Server

    Burgunder, G; Nowacki, F; Giron, S; Hammache, F; Moukaddam, M; eville, N De S er; Beaumel, D; aceres, L C; ément, E Cl; Duchêne, G; Ebran, J P; Fernandez-Dominguez, B; Flavigny, F; Franchoo, S; Gibelin, J; Gillibert, A; évy, S Gr; Guillot, J; Lapoux, V; Lepailleur, A; Matea, I; Matta, A; Nalpas, L; Obertelli, A; Otsuka, T; Pancin, J; Poves, A; Raabe, R; Scarpaci, J A; Stefan, I; Stodel, C; Suzuki, T; Thomas, J C

    2014-01-01

    Energies and spectroscopic factors of the first $7/2^-$, $3/2^-$, $1/2^-$ and $5/2^-$ states in the $^{35}$Si$_{21}$ nucleus were determined by means of the (d,p) transfer reaction in inverse kinematics at GANIL using the MUST2 and EXOGAM detectors. By comparing the spectroscopic information on the $^{35}$Si and $^{37}$S isotones, a reduction of the $p_{3/2} - p_{1/2}$ spin-orbit splitting by about 25% is proposed, while the $f_{7/2} -f_{5/2}$ spin-orbit splitting seems to remain constant. These features, derived after having unfolded nuclear correlations using shell model calculations, have been attributed to the properties of the 2-body spin-orbit interaction, the amplitude of which is derived for the first time in an atomic nucleus. The present results, remarkably well reproduced by using several realistic nucleon-nucleon forces, provide a unique touchstone for the modeling of the spin-orbit interaction in atomic nuclei.

  1. Sign change in the net force in sphere-plate and sphere-sphere systems immersed in nonpolar critical fluid due to the interplay between the critical Casimir and dispersion van der Waals forces

    Science.gov (United States)

    Valchev, Galin; Dantchev, Daniel

    2017-08-01

    We study systems in which both long-ranged van der Waals and critical Casimir interactions are present. The latter arise as an effective force between bodies when immersed in a near-critical medium, say a nonpolar one-component fluid or a binary liquid mixture. They are due to the fact that the presence of the bodies modifies the order parameter profile of the medium between them as well as the spectrum of its allowed fluctuations. We study the interplay between these forces, as well as the total force (TF) between a spherical colloid particle and a thick planar slab and between two spherical colloid particles. We do that using general scaling arguments and mean-field-type calculations utilizing the Derjaguin and the surface integration approaches. They both are based on data of the forces between two parallel slabs separated at a distance L from each other, confining the fluctuating fluid medium characterized by its temperature T and chemical potential μ . The surfaces of the colloid particles and the slab are coated by thin layers exerting strong preference to the liquid phase of the fluid, or one of the components of the mixture, modeled by strong adsorbing local surface potentials, ensuring the so-called (+,+) boundary conditions. On the other hand, the core region of the slab and the particles influence the fluid by long-ranged competing dispersion potentials. We demonstrate that for a suitable set of colloids-fluid, slab-fluid, and fluid-fluid coupling parameters, the competition between the effects due to the coatings and the core regions of the objects involved result, when one changes T , μ , or L , in sign change of the Casimir force (CF) and the TF acting between the colloid and the slab, as well as between the colloids. This can be used for governing the behavior of objects, say colloidal particles, at small distances, say in colloid suspensions for preventing flocculation. It can also provide a strategy for solving problems with handling, feeding

  2. A consistent method for finite volume discretization of body forces on collocated grids applied to flow through an actuator disk

    DEFF Research Database (Denmark)

    Troldborg, Niels; Sørensen, Niels N.; Réthoré, Pierre-Elouan

    2015-01-01

    This paper describes a consistent algorithm for eliminating the numerical wiggles appearing when solving the finite volume discretized Navier-Stokes equations with discrete body forces in a collocated grid arrangement. The proposed method is a modification of the Rhie-Chow algorithm where the for...

  3. [Control study for muscle force and component of body of female patients with knee osteoarthritis].

    Science.gov (United States)

    Pang, Jian; Cao, Yue-long; Shi, Yin-yu; Zhou, Ji-wei; Wang, Xiang; Shi, Ying

    2008-11-01

    To understand the information of female patients with knee osteoarthritis regarding muscle force, constitution parameter. Thirty-seven cases diagnosed as knee osteoarthritis and 37 controls were examined by MES. T-test was used to analysis two groups differences of muscle force, constitution parameter, et al. Compared between affected limbs and controls limbs in patients revealed that the lower limb muscle distribution index of the affected limbs was higher than the control limbs (Pmuscle force, muscle functional index and muscle force of unit volume of the affected limbs were lower than the control limbs (Pmuscle force of both lower limbs, muscle functional index and muscle force of unit volume were lower than control group (Pmuscle force of lower limbs of female patients with knee osteoarthritis is weaker than healthy female. Muscle function disorder instead of muscle atrophy is the key cause of the weakness.

  4. On the restricted four-body problem with the effect of small perturbations in the Coriolis and centrifugal forces

    Science.gov (United States)

    Suraj, Md Sanam; Aggarwal, Rajiv; Arora, Monika

    2017-09-01

    We have studied the restricted four-body problem (R4BP) with the effect of the small perturbation in the Coriolis and centrifugal forces on the libration points and zero velocity curves (ZVCs). Further, we have supposed that all the primaries are set in an equilateral triangle configuration, moving in the circular orbits around their common centre of mass. We have observed that the effect of the small perturbation in centrifugal force has a substantial effect on the location of libration points but a small perturbation in the Coriolis force has no impact on the location of libration points. But the stability of the libration points is highly influenced by the effect of the small perturbation in the Coriolis force. It is observed that as the Coriolis parameter increases, the libration points become stable. Further, it is found that the effect of the small perturbation in the centrifugal force has a substantial influence on the regions of possible motion. Also, when the effect of small perturbation in the centrifugal force increases the forbidden region decreases; here the motion is not possible for the infinitesimal mass. It is observed when the value of the Jacobian constant decreases, the regions of possible motion increase. In addition, we have also discussed how small perturbations in the Coriolis and centrifugal forces influence the Newton-Raphson basins of convergence.

  5. Static Equilibrium Configurations of Charged Metallic Bodies ...

    African Journals Online (AJOL)

    When charged particles are placed on an uncharged metallic body, the charged particles redistribute themselves along the surface of the body until they reach a point or a configuration that no net tangential force is experienced on each particle. That point is referred to as electrostatic equilibrium configuration or simply as ...

  6. Force, torque, and absorbed energy for a body of arbitrary shape and constitution in an electromagnetic radiation field

    Science.gov (United States)

    Farsund, Ø.; Felderhof, B. U.

    1996-02-01

    The force and torque exerted on a body of arbitrary shape and constitution by a stationary radiation field are in principle given by integrals of Minkowski's stress tensor over a surface surrounding the body. Similarly the absorbed energy is given by an integral of the Poynting vector. These integrals are notoriously difficult to evaluate, and so far only spherical bodies have been considered. It is shown here that the integrals may be cast into a simpler form by use of Debye potentials. General expressions for the integrals are derived as sums of bilinear expressions in the coefficients of the expansion of the incident and scattered waves in terms of vector spherical waves. The expressions are simplified for small particles, such as atoms, for which the electric dipole approximation may be used. It is shown that the calculation is also relevant for bodies with nonlinear electromagnetic response.

  7. The design of long range quantum electrodynamical forces and torques between macroscopic bodies

    NARCIS (Netherlands)

    Iannuzzi, D.; Lisanti, M.; Munday, J. N.; Capasso, F.

    2005-01-01

    The interaction between electrically neutral surfaces at sub-micron separation is dominated by the force arising from quantum fluctuations of the electromagnetic field, known as the Casimir force. This effect has been witnessing a renewed interest because of its potential impact in micro- and

  8. Normal and friction stabilization techniques for interactive rigid body constraint-based contact force computations

    DEFF Research Database (Denmark)

    Silcowitz-Hansen, Morten; Abel, Sarah Maria Niebe; Erleben, Kenny

    2010-01-01

    We present a novel, yet simple, method for stabilization of normal forces. A normal stabilization term, carefully designed from hypotheses about interactive usability, is added to the contact force problem. Further, we propose friction stabilization as a completely new stabilization paradigm in i...

  9. Transition from Casimir to van der Waals force between macroscopic bodies

    NARCIS (Netherlands)

    Palasantzas, G.; van Zwol, P. J.; De Hosson, J. Th. M.

    2008-01-01

    The transition of van der Waals to Casimir forces between macroscopic gold surfaces is investigated by atomic force microscopy in the plane-sphere geometry. It was found that the transition appears to take place at separations similar to 10% the plasma wavelength lambda(p) for evaporated gold

  10. Convective Heat Transfer Coefficients of the Human Body under Forced Convection from Ceiling

    DEFF Research Database (Denmark)

    Kurazumi, Yoshihito; Rezgals, Lauris; Melikov, Arsen Krikor

    2014-01-01

    The average convective heat transfer coefficient for a seated human body exposed to downward flow from above was determined. Thermal manikin with complex body shape and size of an average Scandinavian female was used. The surface temperature distribution of the manikin’s body was as the skin...... of the convective heat transfer coefficient of the whole body (hc [W/(m2•K)]) was proposed: hc=4.088+6.592V1.715 for a seated naked body at 20ºC and hc=2.874+7.427V1.345 for a seated naked body at 26ºC. Differences in the convective heat transfer coefficient of the whole body in low air velocity range, V

  11. Connecting neutron star observations to three-body forces in neutron matter and to the nuclear symmetry energy.

    Science.gov (United States)

    Steiner, A W; Gandolfi, S

    2012-02-24

    Using a phenomenological form of the equation of state of neutron matter near the saturation density which has been previously demonstrated to be a good characterization of quantum Monte Carlo simulations, we show that currently available neutron star mass and radius measurements provide a significant constraint on the equation of state of neutron matter. At higher densities we model the equation of state by using polytropes and a quark matter model. We show that observations offer an important constraint on the strength of the three-body force in neutron matter, and thus some theoretical models of the three-body force may be ruled out by currently available astrophysical data. In addition, we obtain an estimate of the symmetry energy of nuclear matter and its slope that can be directly compared to the experiment and other theoretical calculations.

  12. Mutual gravitational potential, force, and torque of a homogeneous polyhedron and an extended body: an application to binary asteroids

    Science.gov (United States)

    Shi, Yu; Wang, Yue; Xu, Shijie

    2017-11-01

    Binary systems are quite common within the populations of near-Earth asteroids, main-belt asteroids, and Kuiper belt asteroids. The dynamics of binary systems, which can be modeled as the full two-body problem, is a fundamental problem for their evolution and the design of relevant space missions. This paper proposes a new shape-based model for the mutual gravitational potential of binary asteroids, differing from prior approaches such as inertia integrals, spherical harmonics, or symmetric trace-free tensors. One asteroid is modeled as a homogeneous polyhedron, while the other is modeled as an extended rigid body with arbitrary mass distribution. Since the potential of the polyhedron is precisely described in a closed form, the mutual gravitational potential can be formulated as a volume integral over the extended body. By using Taylor expansion, the mutual potential is then derived in terms of inertia integrals of the extended body, derivatives of the polyhedron's potential, and the relative location and orientation between the two bodies. The gravitational forces and torques acting on the two bodies described in the body-fixed frame of the polyhedron are derived in the form of a second-order expansion. The gravitational model is then used to simulate the evolution of the binary asteroid (66391) 1999 KW4, and compared with previous results in the literature.

  13. RESTful NET

    CERN Document Server

    Flanders, Jon

    2008-01-01

    RESTful .NET is the first book that teaches Windows developers to build RESTful web services using the latest Microsoft tools. Written by Windows Communication Foundation (WFC) expert Jon Flanders, this hands-on tutorial demonstrates how you can use WCF and other components of the .NET 3.5 Framework to build, deploy and use REST-based web services in a variety of application scenarios. RESTful architecture offers a simpler approach to building web services than SOAP, SOA, and the cumbersome WS- stack. And WCF has proven to be a flexible technology for building distributed systems not necessa

  14. Influence of the Posture of the Trunk on the Spine Forces during Whole-Body Vibration

    National Research Council Canada - National Science Library

    Fritz, Martin; Schäfer, Klaus

    2011-01-01

    .... Assuming that these inclined postures result in a higher health risk than vibration exposure in the upright sitting posture the forces transmitted in the lumbar spine were assessed by means of a biomechanical model...

  15. Nonsmooth Newton method for Fischer function reformulation of contact force problems for interactive rigid body simulation

    DEFF Research Database (Denmark)

    Silcowitz, Morten; Niebe, Sarah Maria; Erleben, Kenny

    2009-01-01

    contact response. In this paper, we present a new approach to contact force determination. We reformulate the contact force problem as a nonlinear root search problem, using a Fischer function. We solve this problem using a generalized Newton method. Our new Fischer - Newton method shows improved...... qualities for specific configurations where the most widespread alternative, the Projected Gauss-Seidel method, fails. Experiments show superior convergence properties of the exact Fischer - Newton method....

  16. Petri Nets

    Indian Academy of Sciences (India)

    Associate Professor of. Computer Science and. Automation at the Indian. Institute of Science,. Bangalore. His research interests are broadly in the areas of stochastic modeling and scheduling methodologies for future factories; and object oriented modeling. GENERAL I ARTICLE. Petri Nets. 1. Overview and Foundations.

  17. Petri Nets

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 4; Issue 8. Petri Nets - Overview and Foundations. Y Narahari. General Article Volume 4 Issue 8 August 1999 pp ... Author Affiliations. Y Narahari1. Department ot Computer Science and Automation, Indian Institute of Science, Bangalore 560 012, India.

  18. Net technical assessment

    OpenAIRE

    Wegmann, David G.

    1989-01-01

    Approved for public release; distribution is unlimited. The present and near term military balance of power between the U.S. and the Soviet Union can be expressed in a variety of net assessments. One can examine the strategic nuclear balance, the conventional balance in Europe, the maritime balance, and many others. Such assessments are essential not only for policy making but for arms control purposes and future force structure planning. However, to project the future military balance, on...

  19. Numerical simulation of circular Couette flow under a radial thermo-electric body force

    Science.gov (United States)

    Kang, Changwoo; Meyer, Antoine; Yoshikawa, Harunori N.; Mutabazi, Innocent

    2017-11-01

    The transition from circular Couette flow of a dielectric fluid with a radial temperature gradient and an alternating electric voltage has been investigated by a direct numerical simulation. The inner cylinder is rotating while the outer one is fixed. The radial temperature gradient and the electric voltage acting on a dielectric fluid generate a radial dielectrophoretic (DEP) force which can induce thermal convection. The flow is controlled by the Taylor number Ta that measures the intensity of the centrifugal force and the electric Rayleigh number L that indicates the intensity of the DEP force. For each value of L, the instability threshold (Tac) is determined and compared with that predicted by the linear stability analysis. Nonlinear coefficients of the Landau equation are computed to reveal the nature of the transition: oscillatory axisymmetric modes occur via a subcritical transition, while steady axisymmetric and oscillatory non-axisymmetric modes occur via supercritical bifurcations. The momentum and heat transfer coefficients are computed to evaluate the efficiency of the flow induced by the DEP force in the momentum and energy transfer.

  20. Numerical simulation of flows in a circular pipe transversely subjected to a localized impulsive body force with applications to blunt traumatic aortic rupture

    Science.gov (United States)

    Di Labbio, G.; Keshavarz-Motamed, Z.; Kadem, L.

    2017-06-01

    Much debate surrounds the mechanisms responsible for the occurrence of blunt traumatic aortic rupture in car accidents, particularly on the role of the inertial body force experienced by the blood due to the abrupt deceleration. The isolated influence of such body forces acting on even simple fluid flows is a fundamental problem in fluid dynamics that has not been thoroughly investigated. This study numerically investigates the fundamental physical problem, where the pulsatile flow in a straight circular pipe is subjected to a transverse body force on a localized volume of fluid. The body force is applied as a brief rectangular impulse in three distinct cases, namely during the accelerating, peak, and decelerating phases of the pulsatile flow. A dimensionless number, termed the degree of influence of the body force (Ψ), is devised to quantify the relative strength of the body force over the flow inertia. The impact induces counter-rotating cross-stream vortices at the boundaries of the forced section accompanied by complex secondary flow structures. This secondary flow is found to develop slowest for an impact occurring during an accelerating flow and fastest during a decelerating flow. The peak skewness of the velocity field, however, occurred at successively later times for the three respective cases. After the impact, these secondary flows act to restore the unforced state and such dominant spatial structures are revealed by proper orthogonal decomposition of the velocity field. This work presents a new class of problems that requires further theoretical and experimental investigation.

  1. Standing and sitting motion of inverted pendulum type assist robot using whole-body motion with force control

    Science.gov (United States)

    Jeong, SeongHee; Takahashi, Takayuki

    2007-12-01

    This paper describes quick and stable standing and sitting motion of an inverted pendulum type robot by wholebody motion including force control. The whole-body motion is achieved by controlling composite center of gravity of the robot, and damping force control of a wrist-roller is employed to assure the stability of inverted pendulum control on a contact situation with the ground. Motion planning of standing and sitting based on the proposed control method is also proposed. Standing and sitting motion using the proposed motion control and motion planning is simulated with a dynamic simulator, ODE(Open Dynamics Engine). From the simulation results, it was confirmed that the robot successively realized the standing and sitting motion quickly and stably.

  2. Effect of Body Structure on Skill Formation in a Force Precision Task Mimicking Cello Bowing Movement

    Science.gov (United States)

    Ogihara, Naomichi; Yamazaki, Nobutoshi

    To elucidate the skill formation mechanism in a complex force precision task mimicking cello bowing movements, three-dimensional joint orientations and changes in bowing force are measured for 2 novice and 2 expert subjects. A rigid link model of the human upper limb is constructed in order to calculate changes in joint moment, potential energy and structural inductivity of motion during bowing, and the motions are compared kinetically. Results show that the novices generate low-in-potential energy bowing motion, but not suitable for skillful control of the bow. In contrast, the experts can fulfill a task requirement by skillfully coordinating the musculo-skeletal system, but the motion is not easy as that of the novices. It is suggested that the transition from a novice to an expert may be difficult due to the ease in the initially generated motion, which obstructs the search for the optimal skillful motion.

  3. Over My Dead Body! Media Constructions of Forced Prostitution in the People's Republic of China

    Directory of Open Access Journals (Sweden)

    Elaine Jeffreys

    2006-09-01

    Full Text Available This paper examines some of the tensions surrounding the PRC’s official policy of banning prostitution by focusing on two highly publicized cases of deceptive recruiting for sexual services—the ‘Tang Shengli Incident’ and the ‘Liu Yanhua Incident’. Both cases involve young rural women who had migrated from their native homes to other more economically developed parts of China to look for work. Both were forced to sell sex and both resisted. However, whereas Tang Shengli jumped from a building rather than be forced into prostitution, Liu Yanhua escaped from conditions akin to sexual servitude by stabbing her ‘employer’. An examination of these cases highlights some of the problems associated with efforts by the Chinese women’s media to promote and protect women’s rights in a country marked by rapid, yet unequal, economic growth and an expanding, albeit banned, sex industry.

  4. Relationship between maximum dynamic force of inferior members and body balance in strength training apprentices

    Directory of Open Access Journals (Sweden)

    Ariane Martins

    2010-08-01

    Full Text Available The relationship between force and balance show controversy results and has directimplications in exercise prescription practice. The objective was to investigate the relationshipbetween maximum dynamic force (MDF of inferior limbs and the static and dynamic balances.Participated in the study 60 individuals, with 18 to 24 years old, strength training apprentices.The MDF was available by mean the One Maximum Repetition (1MR in “leg press” and “kneeextension” and motor testes to available of static and dynamic balances. The correlation testsand multiple linear regression were applied. The force and balance variables showed correlationin females (p=0.038. The corporal mass and static balance showed correlation for the males(p=0.045. The explication capacity at MDF and practices time were small: 13% for staticbalance in males, 18% and 17%, respectively, for static and dynamic balance in females. Inconclusion: the MDF of inferior limbs showed low predictive capacity for performance in staticand dynamic balances, especially for males.

  5. Multi-body simulation of a canine hind limb: model development, experimental validation and calculation of ground reaction forces

    Directory of Open Access Journals (Sweden)

    Wefstaedt Patrick

    2009-11-01

    Full Text Available Abstract Background Among other causes the long-term result of hip prostheses in dogs is determined by aseptic loosening. A prevention of prosthesis complications can be achieved by an optimization of the tribological system which finally results in improved implant duration. In this context a computerized model for the calculation of hip joint loadings during different motions would be of benefit. In a first step in the development of such an inverse dynamic multi-body simulation (MBS- model we here present the setup of a canine hind limb model applicable for the calculation of ground reaction forces. Methods The anatomical geometries of the MBS-model have been established using computer tomography- (CT- and magnetic resonance imaging- (MRI- data. The CT-data were collected from the pelvis, femora, tibiae and pads of a mixed-breed adult dog. Geometric information about 22 muscles of the pelvic extremity of 4 mixed-breed adult dogs was determined using MRI. Kinematic and kinetic data obtained by motion analysis of a clinically healthy dog during a gait cycle (1 m/s on an instrumented treadmill were used to drive the model in the multi-body simulation. Results and Discussion As a result the vertical ground reaction forces (z-direction calculated by the MBS-system show a maximum deviation of 1.75%BW for the left and 4.65%BW for the right hind limb from the treadmill measurements. The calculated peak ground reaction forces in z- and y-direction were found to be comparable to the treadmill measurements, whereas the curve characteristics of the forces in y-direction were not in complete alignment. Conclusion In conclusion, it could be demonstrated that the developed MBS-model is suitable for simulating ground reaction forces of dogs during walking. In forthcoming investigations the model will be developed further for the calculation of forces and moments acting on the hip joint during different movements, which can be of help in context with the in

  6. A hybrid N-body code incorporating algorithmic regularization and post-Newtonian forces

    NARCIS (Netherlands)

    Harfst, S.; Gualandris, A.; Merritt, D.; Mikkola, S.

    2008-01-01

    We describe a novel N-body code designed for simulations of the central regions of galaxies containing massive black holes. The code incorporates Mikkola's 'algorithmic' chain regularization scheme including post-Newtonian terms up to PN2.5 order. Stars moving beyond the chain are advanced using a

  7. On supplementing the database of earthquakes with parameters of tidal forces from cosmic bodies

    Science.gov (United States)

    Kazantsev, A. M.; Kazantseva, L. V.

    2017-05-01

    A possible gravitational influence of the celestial bodies on earthquakes is consider as a trigger mechanism/ In most publications on question, correlations between the number and power of seismic events with the Moon from the Earth, with time of the days are analysed.

  8. Boxfish swimming paradox resolved : forces by the flow of water around the body promote manoeuvrability

    NARCIS (Netherlands)

    Van Wassenbergh, S.; van Manen, K.; Marcroft, T. A.; Alfaro, M. E.; Stamhuis, E. J.

    2015-01-01

    The shape of the carapace protecting the body of boxfishes has been attributed an important hydrodynamic role in drag reduction and in providing automatic, flow-direction realignment and is therefore used in bioinspired design of cars. However, tight swimming-course stabilization is paradoxical

  9. Euler-Poincaré Reduction of Externally Forced Rigid Body Motion

    DEFF Research Database (Denmark)

    Wisniewski, Rafal; Kulczycki, P.

    2004-01-01

    If a mechanical system experiences symmetry, the Lagrangian becomes invariant under a certain group action. This property leads to substantial simplification of the description of movement. The standpoint in this article is a mechanical system affected by an external force of a control action....... Assuming that the system possesses symmetry and the configuration manifold corresponds to a Lie group, the Euler-Poincaré reduction breaks up the motion into separate equations of dynamics and kinematics. This becomes of particular interest for modelling, estimation and control of mechanical systems...

  10. The break-up of Ekman theory in a flow subjected to background rotation and driven by a non-conservative body force

    NARCIS (Netherlands)

    Duran-Matute, M.; Di Nitto, G.; Trieling, R.R.; Kamp, L.P.J.; van Heijst, G.J.F.

    2012-01-01

    We present an experimental/numerical study of a dipolar flow structure in a shallow layer of electrolyte driven by electromagnetic forcing and subjected to background rotation. The aim of this study is to determine the influence of a non-conservative body force on the range of applicability of the

  11. Forced-Air Warming Provides Better Control of Body Temperature in Porcine Surgical Patients

    OpenAIRE

    Dent, Brian T.; Stevens, Karla A.; Clymer, Jeffrey W.

    2016-01-01

    Background: Maintaining normothermia during porcine surgery is critical in ensuring subject welfare and recovery, reducing the risk of immune system compromise and surgical-site infection that can result from hypothermia. In humans, various methods of patient heating have been demonstrated to be useful, but less evaluation has been performed in techniques to prevent hypothermia perioperatively in pigs. Methods: We compared body temperature regulation during surgery before and after modificati...

  12. Hard-sphere fluid adsorbed in an annular wedge: the depletion force of hard-body colloidal physics.

    Science.gov (United States)

    Herring, A R; Henderson, J R

    2007-01-01

    Many important issues of colloidal physics can be expressed in the context of inhomogeneous fluid phenomena. When two large colloids approach one another in solvent, they interact at least partly by the response of the solvent to finding itself adsorbed in the annular wedge formed between the two colloids. At shortest range, this fluid mediated interaction is known as the depletion force/interaction because solvent is squeezed out of the wedge when the colloids approach closer than the diameter of a solvent molecule. An equivalent situation arises when a single colloid approaches a substrate/wall. Accurate treatment of this interaction is essential for any theory developed to model the phase diagrams of homogeneous and inhomogeneous colloidal systems. The aim of our paper is a test of whether or not we possess sufficient knowledge of statistical mechanics that can be trusted when applied to systems of large size asymmetry and the depletion force in particular. When the colloid particles are much larger than a solvent diameter, the depletion force is dominated by the effective two-body interaction experienced by a pair of solvated colloids. This low concentration limit of the depletion force has therefore received considerable attention. One route, which can be rigorously based on statistical mechanical sum rules, leads to an analytic result for the depletion force when evaluated by a key theoretical tool of colloidal science known as the Derjaguin approximation. A rival approach has been based on the assumption that modern density functional theories (DFT) can be trusted for systems of large size asymmetry. Unfortunately, these two theoretical predictions differ qualitatively for hard sphere models, as soon as the solvent density is higher than about 23 that at freezing. Recent theoretical attempts to understand this dramatic disagreement have led to the proposal that the Derjaguin and DFT routes represent opposite limiting behavior, for very large size asymmetry

  13. Running on a lower-body positive pressure treadmill: VO2max, respiratory response, and vertical ground reaction force.

    Science.gov (United States)

    Raffalt, Peter C; Hovgaard-Hansen, Line; Jensen, Bente Rona

    2013-06-01

    This study investigated maximal oxygen consumption (VO2max) and time to exhaustion while running on a lower-body positive pressure treadmill (LBPPT) at normal body weight (BW) as well as how BW support affects respiratory responses, ground reaction forces, and stride characteristics. Twelve runners performed VO2max tests on a regular treadmill and an LBPPT. Furthermore, they performed steady-state running (10km/hr, 14 km/hr, and 18 km/hr) and high-speed running (20km/hr and 22 km/hr) at four different BWs on the LBPPT. VO2, heart rate, ventilation, and breathing frequency as well as vertical ground reaction force (vGRF) and stride characteristics were measured. VO2max could be obtained on both treadmills, although time to exhaustion was 34.5% longer on the LBPPT. VO2, ventilation, and heart rate decreased linearly with increasing BW support at steady-state running, while breathing rate remained unaffected by increasing BW support. Ground reaction force was markedly reduced with increasing BW support. The contact time decreased and flight time increased with increasing BW support. The step frequency decreased and step length increased to some extent with increasing BW support. VO2max can be achieved on an LBPPT at 100% BW with an incline-running protocol. The LBPPT is a suitable training device for athletes and allows training at high running speeds and high aerobic stimuli with the benefit of low vGRF and a near-normal movement pattern, although manipulation of gravitational weight causes some adaptations in locomotion.

  14. A finite element method for netting application to fish cages and fishing gear

    CERN Document Server

    Priour, Daniel

    2014-01-01

    This book describes a finite element method for netting that describes the relation between forces and deformation of the netting and takes into account forces due to the twine elasticity, the hydrodynamic forces, the catch effect, the mesh opening stiffness.

  15. [Evaluation of isometric force in lower limbs and body composition in preterm infants].

    Science.gov (United States)

    Mata Zubillaga, D; Rodríguez Fernández, C; Rodríguez Fernández, L M; de Paz Fernández, J A; Arboleda Franco, S; Alonso Patiño, F

    2015-10-01

    Strength is a physical quality with a clear influence on quality of life. It is determined by the structure of the musculoskeletal system, and depends on the muscular structure. It has been described that prematurity conditions both qualities. The aims of this study are to determine whether prematurity is associated with strength or body composition and evaluate the relationship between prematurity, strength and muscle mass. Case-control study. Participants were premature 7-to-11 year-old children and full-term birth controls. Strength was measured by a strength gauge and body composition from DEXA (duel-energy X-ray absorptiometry) scans. A total of 89 subjects were included and divided into three groups: 30 prematures with birth-weight ≤ 1500g, 29 prematures with birth-weight 1500-2000g, and 30 controls. Weight and BMI z-score was lower in the premature group. No differences were found in muscular mass or strength between groups. A ratio was established between strength and weight or muscular mass. It was observed that it was possible for them to move four times their weight, without finding any differences between groups or a relationship with birth-weight. Between 7 and 11 years of age, children who were premature have lower weight and BMI than the rest of the children. However, there were no differences in body composition or strength between preterm children and controls. Copyright © 2014 Asociación Española de Pediatría. Published by Elsevier España, S.L.U. All rights reserved.

  16. Short-term variation in the body weight of Oystercatchers Haematopus ostralegus : Effect of available feeding time by day and night, temperature and wind force

    NARCIS (Netherlands)

    Zwarts, L; Hulscher, JB; Koopman, K; Zegers, PM

    1996-01-01

    The available feeding time of coastal Oystercatchers varies from day to day due to the effect of wind direction and wind force on the water level. If the birds are not able to feed at all during a day, they lose 30 g, or 6% of their body weight. The body weight increases with the duration of the

  17. Pairing in neutron matter: New uncertainty estimates and three-body forces

    Science.gov (United States)

    Drischler, C.; Krüger, T.; Hebeler, K.; Schwenk, A.

    2017-02-01

    We present solutions of the BCS gap equation in the channels S10 and P32-F32 in neutron matter based on nuclear interactions derived within chiral effective field theory (EFT). Our studies are based on a representative set of nonlocal nucleon-nucleon (NN) plus three-nucleon (3N) interactions up to next-to-next-to-next-to-leading order (N3LO ) as well as local and semilocal chiral NN interactions up to N2LO and N4LO , respectively. In particular, we investigate for the first time the impact of subleading 3N forces at N3LO on pairing gaps and also derive uncertainty estimates by taking into account results for pairing gaps at different orders in the chiral expansion. Finally, we discuss different methods for obtaining self-consistent solutions of the gap equation. Besides the widely used quasilinear method by Khodel et al., we demonstrate that the modified Broyden method is well applicable and exhibits a robust convergence behavior. In contrast to Khodel's method it is based on a direct iteration of the gap equation without imposing an auxiliary potential and is straightforward to implement.

  18. Body

    OpenAIRE

    Riggs, Christina

    2010-01-01

    The human body is both the physical form inhabited by an individual “self” and the medium through which an individual engages with society. Hence the body both shapes and is shaped by an individual’s social roles. In contrast to the cognate fields of archaeology, anthropology, and classics, there has been little explicit discussion or theorization of the body in Egyptology. Some recent works, discussed here, constitute an exception to this trend, but there is much more scope for exploring anc...

  19. Development of Constraint Force Equation Methodology for Application to Multi-Body Dynamics Including Launch Vehicle Stage Seperation

    Science.gov (United States)

    Pamadi, Bandu N.; Toniolo, Matthew D.; Tartabini, Paul V.; Roithmayr, Carlos M.; Albertson, Cindy W.; Karlgaard, Christopher D.

    2016-01-01

    The objective of this report is to develop and implement a physics based method for analysis and simulation of multi-body dynamics including launch vehicle stage separation. The constraint force equation (CFE) methodology discussed in this report provides such a framework for modeling constraint forces and moments acting at joints when the vehicles are still connected. Several stand-alone test cases involving various types of joints were developed to validate the CFE methodology. The results were compared with ADAMS(Registered Trademark) and Autolev, two different industry standard benchmark codes for multi-body dynamic analysis and simulations. However, these two codes are not designed for aerospace flight trajectory simulations. After this validation exercise, the CFE algorithm was implemented in Program to Optimize Simulated Trajectories II (POST2) to provide a capability to simulate end-to-end trajectories of launch vehicles including stage separation. The POST2/CFE methodology was applied to the STS-1 Space Shuttle solid rocket booster (SRB) separation and Hyper-X Research Vehicle (HXRV) separation from the Pegasus booster as a further test and validation for its application to launch vehicle stage separation problems. Finally, to demonstrate end-to-end simulation capability, POST2/CFE was applied to the ascent, orbit insertion, and booster return of a reusable two-stage-to-orbit (TSTO) vehicle concept. With these validation exercises, POST2/CFE software can be used for performing conceptual level end-to-end simulations, including launch vehicle stage separation, for problems similar to those discussed in this report.

  20. Whole-body isometric force/torque measurements for functional assessment in neuro-rehabilitation: platform design, development and verification.

    Science.gov (United States)

    Mazzoleni, Stefano; Toth, Andras; Munih, Marko; Van Vaerenbergh, Jo; Cavallo, Giuseppe; Micera, Silvestro; Dario, Paolo; Guglielmelli, Eugenio

    2009-10-30

    One of the main scientific and technological challenges of rehabilitation bioengineering is the development of innovative methodologies, based on the use of appropriate technological devices, for an objective assessment of patients undergoing a rehabilitation treatment. Such tools should be as fast and cheap to use as clinical scales, which are currently the daily instruments most widely used in the routine clinical practice. A human-centered approach was used in the design and development of a mechanical structure equipped with eight force/torque sensors that record quantitative data during the initiation of a predefined set of Activities of Daily Living (ADL) tasks, in isometric conditions. Preliminary results validated the appropriateness, acceptability and functionality of the proposed platform, that has become now a tool used for clinical research in three clinical centres. This paper presented the design and development of an innovative platform for whole-body force and torque measurements on human subjects. The platform has been designed to perform accurate quantitative measurements in isometric conditions with the specific aim to address the needs for functional assessment tests of patients undergoing a rehabilitation treatment as a consequence of a stroke.The versatility of the system also enlightens several other interesting possible areas of application for therapy in neurorehabilitation, for research in basic neuroscience, and more.

  1. Whole-body isometric force/torque measurements for functional assessment in neuro-rehabilitation: platform design, development and verification

    Directory of Open Access Journals (Sweden)

    Cavallo Giuseppe

    2009-10-01

    Full Text Available Abstract Background One of the main scientific and technological challenges of rehabilitation bioengineering is the development of innovative methodologies, based on the use of appropriate technological devices, for an objective assessment of patients undergoing a rehabilitation treatment. Such tools should be as fast and cheap to use as clinical scales, which are currently the daily instruments most widely used in the routine clinical practice. Methods A human-centered approach was used in the design and development of a mechanical structure equipped with eight force/torque sensors that record quantitative data during the initiation of a predefined set of Activities of Daily Living (ADL tasks, in isometric conditions. Results Preliminary results validated the appropriateness, acceptability and functionality of the proposed platform, that has become now a tool used for clinical research in three clinical centres. Conclusion This paper presented the design and development of an innovative platform for whole-body force and torque measurements on human subjects. The platform has been designed to perform accurate quantitative measurements in isometric conditions with the specific aim to address the needs for functional assessment tests of patients undergoing a rehabilitation treatment as a consequence of a stroke. The versatility of the system also enlightens several other interesting possible areas of application for therapy in neurorehabilitation, for research in basic neuroscience, and more.

  2. Changes in force production and stroke parameters of trained able-bodied and unilateral arm-amputee female swimmers during a 30 s tethered front-crawl swim.

    Science.gov (United States)

    Lee, Casey Jane; Sanders, Ross H; Payton, Carl J

    2014-01-01

    This study examined changes in the propulsive force and stroke parameters of arm-amputee and able-bodied swimmers during tethered swimming. Eighteen well-trained female swimmers (nine unilateral arm amputees and nine able-bodied) were videotaped performing maximal-effort 30 s front-crawl swims, while attached to a load cell mounted on a pool wall. Tether force, stroke rate, stroke phase durations and inter-arm angle were quantified. The able-bodied group produced significantly higher mean and maximum tether forces than the amputee group. The mean of the intra-cyclic force peaks was very similar for both groups. Mean and maximum tether force had significant negative associations with 100 m swim time, for both groups. Both groups exhibited a similar fatigue index (relative decrease in tether force) during the test, but the amputees had a significantly greater stroke rate decline. A significant positive association between stroke rate decline and fatigue index was obtained for the able-bodied group only. Inter-arm angle and relative phase durations did not change significantly during the test for either group, except the recovery phase duration of the arm amputees, which decreased significantly. This study's results can contribute to the development of a more evidence-based classification system for swimmers with a disability.

  3. The role of cell body density in ruminant retina mechanics assessed by atomic force and Brillouin microscopy.

    Science.gov (United States)

    Weber, Isabell; Yun, Seok-Hyun; Scarcelli, Guillano; Franze, Kristian

    2017-04-13

    Cells in the central nervous system (CNS) respond to the stiffness of their environment. CNS tissue is mechanically highly heterogeneous, thus providing motile cells with region-specific mechanical signals. While CNS mechanics has been measured with a variety of techniques, reported values of tissue stiffness vary greatly, and the morphological structures underlying spatial changes in tissue stiffness remain poorly understood. We here exploited two complementary techniques, contact-based atomic force microscopy and contact-free Brillouin microscopy, to determine the mechanical properties of ruminant retinae, which are built up by different tissue layers. As in all vertebrate retinae, layers of high cell body densities ('nuclear layers') alternate with layers of low cell body densities ('plexiform layers'). Different tissue layers varied significantly in their mechanical properties, with the photoreceptor layer being the stiffest region of the retina, and the inner plexiform layer belonging to the softest regions. As both techniques yielded similar results, our measurements allowed us to calibrate the Brillouin microscopy measurements and convert the Brillouin shift into a quantitative assessment of elastic tissue stiffness with optical resolution. Similar as in the mouse spinal cord and the developing Xenopus brain, we found a strong correlation between nuclear densities and tissue stiffness. Hence, the cellular composition of retinae appears to strongly contribute to local tissue stiffness, and Brillouin microscopy shows a great potential for the application in vivo to measure the mechanical properties of transparent tissues. © 2017 IOP Publishing Ltd.

  4. The role of cell body density in ruminant retina mechanics assessed by atomic force and Brillouin microscopy

    Science.gov (United States)

    Weber, Isabell P.; Yun, Seok Hyun; Scarcelli, Giuliano; Franze, Kristian

    2017-12-01

    Cells in the central nervous system (CNS) respond to the stiffness of their environment. CNS tissue is mechanically highly heterogeneous, thus providing motile cells with region-specific mechanical signals. While CNS mechanics has been measured with a variety of techniques, reported values of tissue stiffness vary greatly, and the morphological structures underlying spatial changes in tissue stiffness remain poorly understood. We here exploited two complementary techniques, contact-based atomic force microscopy and contact-free Brillouin microscopy, to determine the mechanical properties of ruminant retinae, which are built up by different tissue layers. As in all vertebrate retinae, layers of high cell body densities (‘nuclear layers’) alternate with layers of low cell body densities (‘plexiform layers’). Different tissue layers varied significantly in their mechanical properties, with the photoreceptor layer being the stiffest region of the retina, and the inner plexiform layer belonging to the softest regions. As both techniques yielded similar results, our measurements allowed us to calibrate the Brillouin microscopy measurements and convert the Brillouin shift into a quantitative assessment of elastic tissue stiffness with optical resolution. Similar as in the mouse spinal cord and the developing Xenopus brain, we found a strong correlation between nuclear densities and tissue stiffness. Hence, the cellular composition of retinae appears to strongly contribute to local tissue stiffness, and Brillouin microscopy shows a great potential for the application in vivo to measure the mechanical properties of transparent tissues.

  5. Master Robotic Net

    Directory of Open Access Journals (Sweden)

    Vladimir Lipunov

    2010-01-01

    Full Text Available The main goal of the MASTER-Net project is to produce a unique fast sky survey with all sky observed over a single night down to a limiting magnitude of 19-20. Such a survey will make it possible to address a number of fundamental problems: search for dark energy via the discovery and photometry of supernovae (including SNIa, search for exoplanets, microlensing effects, discovery of minor bodies in the Solar System, and space-junk monitoring. All MASTER telescopes can be guided by alerts, and we plan to observe prompt optical emission from gamma-ray bursts synchronously in several filters and in several polarization planes.

  6. Reliability and Minimal Detectable Change Values for Predictions of Knee Forces during Gait and Stair Ascent Derived from the FreeBody Musculoskeletal Model of the Lower Limb

    Directory of Open Access Journals (Sweden)

    Phil D. B. Price

    2017-12-01

    Full Text Available FreeBody is a musculoskeletal model of the lower limb used to calculate predictions of muscle and joint contact forces. The validation of FreeBody has been described in a number of publications; however, its reliability has yet to be established. The purpose of this study was, therefore, to establish the test–retest reliability of FreeBody in a population of healthy adults in order to add support to previous and future research using FreeBody that demonstrates differences between cohorts after an intervention. We hypothesized that test–retest estimations of knee contact forces from FreeBody would demonstrate a high intra-class correlation. Kinematic and kinetic data from nine older participants (4 men: mean age = 63 ± 11 years; 5 women: mean age = 49 ± 4 years performing level walking and stair ascent was collected on consecutive days and then analyzed using FreeBody. There was a good level of intra-session agreement between the waveforms for the individual trials of each activity during testing session 1 (R = 0.79–0.97. Similarly, overall there was a good inter-session agreement within subjects (R = 0.69–0.97 although some subjects showed better agreement than others. There was a high level of agreement between the group mean waveforms of the two sessions for all variables (R = 0.882–0.997. The intra-class correlation coefficients (ICC were very high for peak tibiofemoral joint contact forces (TFJ and hamstring forces during gait, for peak patellofemoral joint contact forces and quadriceps forces during stair ascent and for peak lateral TFJ and the proportion of TFJ accounted for by the medial compartment during both tasks (ICC = 0.86–0.96. Minimal detectable change (MDC of the peak knee forces during gait ranged between 0.43 and 1.53 × body weight (18–170% of the mean peak values. The smallest MDCs were found for medial TFJ share (4.1 and 5.8% for walking and stair ascent, respectively

  7. Africa-wide monitoring of small surface water bodies using multisource satellite data: a monitoring system for FEWS NET: chapter 5

    Science.gov (United States)

    Velpuri, Naga Manohar; Senay, Gabriel B.; Rowland, James; Verdin, James P.; Alemu, Henok; Melesse, Assefa M.; Abtew, Wossenu; Setegn, Shimelis G.

    2014-01-01

    Continental Africa has the highest volume of water stored in wetlands, large lakes, reservoirs, and rivers, yet it suffers from problems such as water availability and access. With climate change intensifying the hydrologic cycle and altering the distribution and frequency of rainfall, the problem of water availability and access will increase further. Famine Early Warning Systems Network (FEWS NET) funded by the United States Agency for International Development (USAID) has initiated a large-scale project to monitor small to medium surface water points in Africa. Under this project, multisource satellite data and hydrologic modeling techniques are integrated to monitor several hundreds of small to medium surface water points in Africa. This approach has been already tested to operationally monitor 41 water points in East Africa. The validation of modeled scaled depths with field-installed gauge data demonstrated the ability of the model to capture both the spatial patterns and seasonal variations. Modeled scaled estimates captured up to 60 % of the observed gauge variability with a mean root-mean-square error (RMSE) of 22 %. The data on relative water level, precipitation, and evapotranspiration (ETo) for water points in East and West Africa were modeled since 1998 and current information is being made available in near-real time. This chapter presents the approach, results from the East African study, and the first phase of expansion activities in the West Africa region. The water point monitoring network will be further expanded to cover much of sub-Saharan Africa. The goal of this study is to provide timely information on the water availability that would support already established FEWS NET activities in Africa. This chapter also presents the potential improvements in modeling approach to be implemented during future expansion in Africa.

  8. Test-retest reliability of the net joint power transferred by the lower limbs during walking in healthy men

    Directory of Open Access Journals (Sweden)

    Daniel Jandačka

    2013-09-01

    Full Text Available OBJECTIVE: To determine the reliability of the measurement of net joint power during repeated gait measurements within one day and between two different measurement days. METHODS: Thirty able-bodied men who underwent repeated gait measurements within a day and between days participated in this research. An acceptable trial was one in which the participant complied with the range of walking speed 1.45 m/s ± 5%. Three-dimensional angles, angular velocities, net moments of force and net power for the ankle, knee and hip joints were determined using external passive reflective markers, an 8-camera motion analysis system and two force plates. RESULTS: This study presents the patterns of the net power in the fundamental joints of the lower limbs in young healthy men at standard gait velocity. Intraclass correlation coefficients for net joint power measure reached values in the range of .70 to .89 on the first day, from .69 to .86 on the second day, and from .67 to .83 in total. CONCLUSION: The reliability of the measurement of the peak net joint power within one day and between the two measurement days was evaluated as satisfactory. The study provides the value of minimal detectable change for the peak net power of the lower limb in the sagittal plane during gait. The net joint power appears to be a reliable measure and could be used in practice.

  9. Muscle Activation and Estimated Relative Joint Force During Running with Weight Support on a Lower-Body Positive-Pressure Treadmill.

    Science.gov (United States)

    Jensen, Bente R; Hovgaard-Hansen, Line; Cappelen, Katrine L

    2016-08-01

    Running on a lower-body positive-pressure (LBPP) treadmill allows effects of weight support on leg muscle activation to be assessed systematically, and has the potential to facilitate rehabilitation and prevent overloading. The aim was to study the effect of running with weight support on leg muscle activation and to estimate relative knee and ankle joint forces. Runners performed 6-min running sessions at 2.22 m/s and 3.33 m/s, at 100%, 80%, 60%, 40%, and 20% body weight (BW). Surface electromyography, ground reaction force, and running characteristics were measured. Relative knee and ankle joint forces were estimated. Leg muscles responded differently to unweighting during running, reflecting different relative contribution to propulsion and antigravity forces. At 20% BW, knee extensor EMGpeak decreased to 22% at 2.22 m/s and 28% at 3.33 m/s of 100% BW values. Plantar flexors decreased to 52% and 58% at 20% BW, while activity of biceps femoris muscle remained unchanged. Unweighting with LBPP reduced estimated joint force significantly although less than proportional to the degree of weight support (ankle). It was concluded that leg muscle activation adapted to the new biomechanical environment, and the effect of unweighting on estimated knee force was more pronounced than on ankle force.

  10. Electromagnetic forces and internal stresses in dielectric media.

    Science.gov (United States)

    Frias, Winston; Smolyakov, Andrei I

    2012-04-01

    The macroscopic electromagnetic force on dielectric bodies and the related problem of the momentum conservation are discussed. It is argued that different forms of the momentum conservation and, respectively, different forms of the force density, correspond to the different ordering in the macroscopic averaging procedure. Different averaging procedures and averaging length scale assumptions result in expressions for the force density with vastly different force density profiles which can potentially be detected experimentally by measuring the profiles of the internal stresses in the medium. The expressions for the Helmholtz force is generalized for the dissipative case. It is shown that the net (integrated) force on the body in vacuum is the same for Lorentz and Helmholtz expressions in all configuration. The case of a semi-infinite medium is analyzed and it is shown that explicit assumptions on the boundary conditions at infinity remove ambiguity in the force on the semi-infinite dielectric.

  11. Contribution of core body temperature, prior wake time, and sleep stages to cognitive throughput performance during forced desynchrony.

    Science.gov (United States)

    Darwent, David; Ferguson, Sally A; Sargent, Charli; Paech, Gemma M; Williams, Louise; Zhou, Xuan; Matthews, Raymond W; Dawson, Drew; Kennaway, David J; Roach, Greg D

    2010-07-01

    Shiftworkers are often required to sleep at inappropriate phases of their circadian timekeeping system, with implications for the dynamics of ultradian sleep stages. The independent effects of these changes on cognitive throughput performance are not well understood. This is because the effects of sleep on performance are usually confounded with circadian factors that cannot be controlled under normal day/night conditions. The aim of this study was to assess the contribution of prior wake, core body temperature, and sleep stages to cognitive throughput performance under conditions of forced desynchrony (FD). A total of 11 healthy young adult males resided in a sleep laboratory in which day/night zeitgebers were eliminated and ambient room temperature, lighting levels, and behavior were controlled. The protocol included 2 training days, a baseline day, and 7 x 28-h FD periods. Each FD period consisted of an 18.7-h wake period followed by a 9.3-h rest period. Sleep was assessed using standard polysomnography. Core body temperature and physical activity were assessed continuously in 1-min epochs. Cognitive throughput was measured by a 5-min serial addition and subtraction (SAS) task and a 90-s digit symbol substitution (DSS) task. These were administered in test sessions scheduled every 2.5 h across the wake periods of each FD period. On average, sleep periods had a mean (+/- standard deviation) duration of 8.5 (+/-1.2) h in which participants obtained 7.6 (+/-1.4) h of total sleep time. This included 4.2 (+/-1.2) h of stage 1 and stage 2 sleep (S1-S2 sleep), 1.6 (+/-0.6) h of slow-wave sleep (SWS), and 1.8 (+/-0.6) h of rapid eye movement (REM) sleep. A mixed-model analysis with five covariates indicated significant fixed effects on cognitive throughput for circadian phase, prior wake time, and amount of REM sleep. Significant effects for S1-S2 sleep and SWS were not found. The results demonstrate that variations in core body temperature, time awake, and amount of

  12. Precession effect of the gravitational self-force in a Schwarzschild spacetime and the effective one-body formalism

    CERN Document Server

    Barack, Leor; Sago, Norichika

    2010-01-01

    Using a recently presented numerical code for calculating the Lorenz-gauge gravitational self-force (GSF), we compute the $O(m)$ conservative correction to the precession rate of the small-eccentricity orbits of a particle of mass $m$ moving around a Schwarzschild black hole of mass ${\\mathsf M}\\gg m$. Specifically, we study the gauge-invariant function $\\rho(x)$, where $\\rho$ is defined as the $O(m)$ part of the dimensionless ratio $(\\hat\\Omega_r/\\hat\\Omega_{\\varphi})^2$ between the squares of the radial and azimuthal frequencies of the orbit, and where $x=[Gc^{-3}({\\mathsf M}+m)\\hat\\Omega_{\\varphi}]^{2/3}$ is a gauge-invariant measure of the dimensionless gravitational potential (mass over radius) associated with the mean circular orbit. Our GSF computation of the function $\\rho(x)$ in the interval $0Body (EOB) description of the conservative dynamics of bi...

  13. Intuitive eating is inversely associated with body weight status in the general population-based NutriNet-Santé study.

    Science.gov (United States)

    Camilleri, Géraldine M; Méjean, Caroline; Bellisle, France; Andreeva, Valentina A; Kesse-Guyot, Emmanuelle; Hercberg, Serge; Péneau, Sandrine

    2016-05-01

    To examine the relationship between intuitive eating (IE), which includes eating in response to hunger and satiety cues rather than emotional cues and without having forbidden foods, and weight status in a large sample of adults. A total of 11,774 men and 40,389 women aged ≥18 years participating in the NutriNet-Santé cohort were included in this cross-sectional analysis. Self-reported weight and height were collected as well as IE levels using the validated French version of the Intuitive Eating Scale-2. The association between IE and weight status was assessed using multinomial logistic regression models. A higher IE score was strongly associated with lower odds of overweight or obesity in both men and women. The strongest associations were observed in women for both overweight [quartile 4 vs. 1 of IE: odds ratio, 95% confidence interval: (0.19, 0.17-0.20)] and obesity (0.09, 0.08-0.10). Associations in men were as follows: for overweight (0.43, 0.38-0.48) and obesity (0.14, 0.11-0.18). IE is inversely associated with overweight and obesity which supports its importance. Although no causality can be inferred from the reported associations, these data suggest that IE might be relevant for obesity prevention and treatment. © 2016 The Obesity Society.

  14. Dispersion Forces

    CERN Document Server

    Buhmann, Stefan Yoshi

    2012-01-01

    In this book, a modern unified theory of dispersion forces on atoms and bodies is presented which covers a broad range of advanced aspects and scenarios. Macroscopic quantum electrodynamics is shown to provide a powerful framework for dispersion forces which allows for discussing general properties like their non-additivity and the relation between microscopic and macroscopic interactions. It is demonstrated how the general results can be used to obtain dispersion forces on atoms in the presence of bodies of various shapes and materials. Starting with a brief recapitulation of volume I, this volume II deals especially with bodies of irregular shapes, universal scaling laws, dynamical forces on excited atoms, enhanced forces in cavity quantum electrodynamics, non-equilibrium forces in thermal environments and quantum friction. The book gives both the specialist and those new to the field a thorough overview over recent results in the field. It provides a toolbox for studying dispersion forces in various contex...

  15. Prospective association between consumption frequency of organic food and body weight change, risk of overweight or obesity: results from the NutriNet-Santé Study.

    Science.gov (United States)

    Kesse-Guyot, Emmanuelle; Baudry, Julia; Assmann, Karen E; Galan, Pilar; Hercberg, Serge; Lairon, Denis

    2017-01-01

    A lower BMI has been reported among consumers of organic foods, but this relationship has never been examined in a prospective design study. Our aim was to prospectively investigate the association between frequency of organic food consumption and weight change. We analysed data from 62 224 participants of the NutriNet-Santé cohort (78 % women, mean age=45 years) with information on consumption frequency of organic foods, dietary intake and repeated anthropometric data. For sixteen products, participants reported their consumption frequency of labelled organic foods (never, occasionally, most of the time). An organic score (OS) with a maximum of thirty-two points was computed. The associations of the OS (modeled as quartiles (Q)) with change in BMI during follow-up (on average 3·1 years) and with the risk of overweight and obesity were estimated by ANCOVA and multivariable logistic regression. A lower BMI increase was observed across quartiles of the OS (mean difference Q4 v. Q1=-0·16 (95 % CI -0·32, -0·01). An increase in the OS was associated with a lower risk of overweight and obesity (among non-overweight and non-obese participants at inclusion): OR for Q4 v. Q1 were 0·77 (95 % CI 0·68, 0·86) and 0·69 (95 % CI 0·58, 0·82), respectively. Concerning obesity risk, the association was stronger among participants with higher adherence to nutritional guidelines. This study supports a strong protective role of consumption frequency of organic foods with regard to the risk of overweight and obesity that depends on overall dietary quality. Upon confirmation, these results may contribute to fine-tune nutritional guidelines by accounting for farming practices in food production.

  16. The Effect of Increasing Inertia upon Vertical Ground Reaction Forces during Locomotion

    Science.gov (United States)

    DeWitt, John K.; Hagan, R. Donald; Cromwell, Ronita L.

    2007-01-01

    The addition of inertia to exercising astronauts could increase ground reaction forces and potentially provide a greater health benefit. However, conflicting results have been reported regarding the adaptations to additional mass (inertia) without additional net weight (gravitational force) during locomotion. We examined the effect of increasing inertia while maintaining net gravitational force on vertical ground reaction forces and kinematics during walking and running. Vertical ground reaction force was measured for ten healthy adults (5 male/5 female) during walking (1.34 m/s) and running (3.13 m/s) using a force-measuring treadmill. Subjects completed locomotion at normal weight and mass, and at 10, 20, 30, and 40% of added inertial force. The added gravitational force was relieved with overhead suspension, so that the net force between the subject and treadmill at rest remained equal to 100% body weight. Peak vertical impact forces and loading rates increased with increased inertia during walking, and decreased during running. As inertia increased, peak vertical propulsive forces decreased during walking and did not change during running. Stride time increased during walking and running, and contact time increased during running. Vertical ground reaction force production and adaptations in gait kinematics were different between walking and running. The increased inertial forces were utilized independently from gravitational forces by the motor control system when determining coordination strategies.

  17. Effects of repulsive three-body force in 12C + 12C scattering at 100A MeV

    Directory of Open Access Journals (Sweden)

    W.W. Qu

    2015-12-01

    Full Text Available The angular distribution of 12C + 12C scattering at an incident energy of 100A MeV has been measured. The elastic and inelastic scatterings in 12C to the excitation energies of up to ∼45 MeV were measured simultaneously for the first time with the high-resolution Grand Raiden spectrometer at the Research Center for Nuclear Physics (RCNP. The angular distributions of the elastic scattering to the ground state (01+ and inelastic scattering to the 4.44 MeV (21+ excited state were precisely obtained in the angular range of 1.0°–7.5° with a step of 0.1°. Additionally, the angular distribution was obtained for the sum of the cross sections for excitation energies above the 4.44 MeV state up to 11 MeV, which includes the 7.65 MeV (02+, 9.64 MeV (31−, and 10.30 MeV (22+ states, in addition to probably the simultaneous excitation of the 4.44 MeV state in the projectile and the target nuclei. Those combined data provide a means to study the effects of channel coupling on the elastic cross section. The observed angular distributions are compared with theoretical calculations based on three double-folding models with complex G-matrix interactions, the CEG07b, MPa, and ESC models. The importance of three-body repulsive forces included in the CEG07b and MPa models will be discussed.

  18. Body mass index-percent forced vital capacity-respiratory hospitalization: new staging for idiopathic pulmonary fibrosis patients.

    Science.gov (United States)

    Kishaba, Tomoo; Nagano, Hiroaki; Nei, Yuichiro; Yamashiro, Shin

    2016-12-01

    Idiopathic pulmonary fibrosis (IPF) is relentless progressive interstitial lung disease. Evaluating predictor of mortality for IPF patients is crucial. The aim of this study was to evaluate the serial trend of important indicators of prognosis and create a useful staging method for IPF patients. We retrospectively searched medical records, pulmonary function tests (PFTs), and chest high resolution computed tomography (HRCT) scans from January 1, 2008 through June 30, 2015 at our hospital. We also evaluated the same parameters 1-year later. We identified 65 IPF patients. The mean age was 71.9±1.8 years (range, 22-85 years). In terms of PFTs, mean percent predicted forced vital capacity (%FVC) was 69.8±2.7. Baseline mean body mass index (BMI) was 24.3±0.6 kg/mm2. Mean survival was 39.2 months (range, 0.9-158.9 months). Cox proportional hazard ratios (HRs) showed the following to be predictors of mortality in IPF patients: 1-year BMI (HR: 0.899; 95% CI: 0.825-0.979; P=0.021); 1-year %FVC (HR: 0.932; 95% CI: 0.887-0.979; P=0.005) and 1-year respiratory hospitalization (HR: 3.307; 95% CI: 2.149-5.090; Pone of three groups according to the composite points. Mean survival of stages 1, 2, and 3 was 77.9 (30.8-158.9), 43.9 (0.9-145.2) and 14.8 (3.5-32) months (P<0.001), respectively. In our cohort of IPF patients, this new staging method, including delta BMI and delta %FVC and respiratory hospitalization within 1-year showed a clear survival difference.

  19. Assessing many-body contributions to intermolecular interactions of the AMOEBA force field using energy decomposition analysis of electronic structure calculations.

    Science.gov (United States)

    Demerdash, Omar; Mao, Yuezhi; Liu, Tianyi; Head-Gordon, Martin; Head-Gordon, Teresa

    2017-10-28

    In this work, we evaluate the accuracy of the classical AMOEBA model for representing many-body interactions, such as polarization, charge transfer, and Pauli repulsion and dispersion, through comparison against an energy decomposition method based on absolutely localized molecular orbitals (ALMO-EDA) for the water trimer and a variety of ion-water systems. When the 2- and 3-body contributions according to the many-body expansion are analyzed for the ion-water trimer systems examined here, the 3-body contributions to Pauli repulsion and dispersion are found to be negligible under ALMO-EDA, thereby supporting the validity of the pairwise-additive approximation in AMOEBA's 14-7 van der Waals term. However AMOEBA shows imperfect cancellation of errors for the missing effects of charge transfer and incorrectness in the distance dependence for polarization when compared with the corresponding ALMO-EDA terms. We trace the larger 2-body followed by 3-body polarization errors to the Thole damping scheme used in AMOEBA, and although the width parameter in Thole damping can be changed to improve agreement with the ALMO-EDA polarization for points about equilibrium, the correct profile of polarization as a function of intermolecular distance cannot be reproduced. The results suggest that there is a need for re-examining the damping and polarization model used in the AMOEBA force field and provide further insights into the formulations of polarizable force fields in general.

  20. Association between insulin resistance, lean mass and muscle torque/force in proximal versus distal body parts in healthy young men.

    Science.gov (United States)

    Gysel, T; Calders, P; Cambier, D; Roman de Mettelinge, T; Kaufman, J-M; Taes, Y; Zmierczak, H-G; Goemaere, S

    2014-03-01

    The purpose of this study was to investigate whether there is already an association of insulin resistance (IR) with muscle mass and -force/torque in an adult population and whether this relationship is the same in distal and proximal body parts. 358 Healthy young men were divided into a more insulin sensitive (MIS) (n=89) and a less insulin sensitive (LIS) group (n=89), respectively using lower and upper quartiles of HOMA-IR index (Homeostasis Model Assessment of IR). Muscle force/torque and lean mass, were compared between the two groups. LIS subjects had higher absolute thigh lean mass, but not higher thigh muscle torque, resulting in a lower torque per kg muscle. In upper arm, lean mass was higher in LIS subjects, but also absolute muscle torque resulted higher. For handgrip force, the LIS and MIS group had similar results, despite a trend towards higher forearm lean mass in LIS subjects. Lean mass % of total lean mass is lower in LIS subjects in more distal body parts. Already in a young healthy population, IR seems to be associated with lower force/torque per muscle mass and lower lean mass % of total lean mass predominantly in more distal body parts.

  1. A review of a method for dynamic load distribution, dynamical modeling, and explicit internal force control when two manipulators mutually lift and transport a rigid body object

    Energy Technology Data Exchange (ETDEWEB)

    Unseren, M.A.

    1997-04-20

    The paper reviews a method for modeling and controlling two serial link manipulators which mutually lift and transport a rigid body object in a three dimensional workspace. A new vector variable is introduced which parameterizes the internal contact force controlled degrees of freedom. A technique for dynamically distributing the payload between the manipulators is suggested which yields a family of solutions for the contact forces and torques the manipulators impart to the object. A set of rigid body kinematic constraints which restrict the values of the joint velocities of both manipulators is derived. A rigid body dynamical model for the closed chain system is first developed in the joint space. The model is obtained by generalizing the previous methods for deriving the model. The joint velocity and acceleration variables in the model are expressed in terms of independent pseudovariables. The pseudospace model is transformed to obtain reduced order equations of motion and a separate set of equations governing the internal components of the contact forces and torques. A theoretic control architecture is suggested which explicitly decouples the two sets of equations comprising the model. The controller enables the designer to develop independent, non-interacting control laws for the position control and internal force control of the system.

  2. Estimating 3D L5/S1 moments and ground reaction forces during trunk bending using a full-body ambulatory inertial motion capture system.

    Science.gov (United States)

    Faber, G S; Chang, C C; Kingma, I; Dennerlein, J T; van Dieën, J H

    2016-04-11

    Inertial motion capture (IMC) systems have become increasingly popular for ambulatory movement analysis. However, few studies have attempted to use these measurement techniques to estimate kinetic variables, such as joint moments and ground reaction forces (GRFs). Therefore, we investigated the performance of a full-body ambulatory IMC system in estimating 3D L5/S1 moments and GRFs during symmetric, asymmetric and fast trunk bending, performed by nine male participants. Using an ambulatory IMC system (Xsens/MVN), L5/S1 moments were estimated based on the upper-body segment kinematics using a top-down inverse dynamics analysis, and GRFs were estimated based on full-body segment accelerations. As a reference, a laboratory measurement system was utilized: GRFs were measured with Kistler force plates (FPs), and L5/S1 moments were calculated using a bottom-up inverse dynamics model based on FP data and lower-body kinematics measured with an optical motion capture system (OMC). Correspondence between the OMC+FP and IMC systems was quantified by calculating root-mean-square errors (RMSerrors) of moment/force time series and the interclass correlation (ICC) of the absolute peak moments/forces. Averaged over subjects, L5/S1 moment RMSerrors remained below 10Nm (about 5% of the peak extension moment) and 3D GRF RMSerrors remained below 20N (about 2% of the peak vertical force). ICCs were high for the peak L5/S1 extension moment (0.971) and vertical GRF (0.998). Due to lower amplitudes, smaller ICCs were found for the peak asymmetric L5/S1 moments (0.690-0.781) and horizontal GRFs (0.559-0.948). In conclusion, close correspondence was found between the ambulatory IMC-based and laboratory-based estimates of back load. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. NA-NET numerical analysis net

    Energy Technology Data Exchange (ETDEWEB)

    Dongarra, J. [Tennessee Univ., Knoxville, TN (United States). Dept. of Computer Science]|[Oak Ridge National Lab., TN (United States); Rosener, B. [Tennessee Univ., Knoxville, TN (United States). Dept. of Computer Science

    1991-12-01

    This report describes a facility called NA-NET created to allow numerical analysts (na) an easy method of communicating with one another. The main advantage of the NA-NET is uniformity of addressing. All mail is addressed to the Internet host ``na-net.ornl.gov`` at Oak Ridge National Laboratory. Hence, members of the NA-NET do not need to remember complicated addresses or even where a member is currently located. As long as moving members change their e-mail address in the NA-NET everything works smoothly. The NA-NET system is currently located at Oak Ridge National Laboratory. It is running on the same machine that serves netlib. Netlib is a separate facility that distributes mathematical software via electronic mail. For more information on netlib consult, or send the one-line message ``send index`` to netlib{at}ornl.gov. The following report describes the current NA-NET system from both a user`s perspective and from an implementation perspective. Currently, there are over 2100 members in the NA-NET. An average of 110 mail messages pass through this facility daily.

  4. NA-NET numerical analysis net

    Energy Technology Data Exchange (ETDEWEB)

    Dongarra, J. (Tennessee Univ., Knoxville, TN (United States). Dept. of Computer Science Oak Ridge National Lab., TN (United States)); Rosener, B. (Tennessee Univ., Knoxville, TN (United States). Dept. of Computer Science)

    1991-12-01

    This report describes a facility called NA-NET created to allow numerical analysts (na) an easy method of communicating with one another. The main advantage of the NA-NET is uniformity of addressing. All mail is addressed to the Internet host na-net.ornl.gov'' at Oak Ridge National Laboratory. Hence, members of the NA-NET do not need to remember complicated addresses or even where a member is currently located. As long as moving members change their e-mail address in the NA-NET everything works smoothly. The NA-NET system is currently located at Oak Ridge National Laboratory. It is running on the same machine that serves netlib. Netlib is a separate facility that distributes mathematical software via electronic mail. For more information on netlib consult, or send the one-line message send index'' to netlib{at}ornl.gov. The following report describes the current NA-NET system from both a user's perspective and from an implementation perspective. Currently, there are over 2100 members in the NA-NET. An average of 110 mail messages pass through this facility daily.

  5. A metered intake of milk following exercise and thermal dehydration restores whole-body net fluid balance better than a carbohydrate-electrolyte solution or water in healthy young men.

    Science.gov (United States)

    Seery, Suzanne; Jakeman, Philip

    2016-09-01

    Appropriate rehydration and nutrient intake in recovery is a key component of exercise performance. This study investigated whether the recovery of body net fluid balance (NFB) following exercise and thermal dehydration to -2 % of body mass (BM) was enhanced by a metered rate of ingestion of milk (M) compared with a carbohydrate-electrolyte solution (CE) or water (W). In randomised order, seven active men (aged 26·2 (sd 6·1) years) undertook exercise and thermal dehydration to -2 % of BM on three occasions. A metered replacement volume of M, CE or W equivalent to 150 % of the BM loss was then consumed within 2-3 h. NFB was subsequently measured for 5 h from commencement of rehydration. A higher overall NFB in M than CE (P=0·001) and W (P=0·006) was observed, with no difference between CE and W (P=0·69). After 5 h, NFB in M remained positive (+117 (sd 122) ml) compared with basal, and it was greater than W (-539 (sd 390) ml, P=0·011) but not CE (-381 (sd 460) ml, P=0·077, d=1·6). Plasma osmolality (Posm) and K remained elevated above basal in M compared with CE and W. The change in Posm was associated with circulating pre-provasopressin (r s 0·348, Pfluid ingestion acts in synergy with the nutrient composition of M in the restoration of NFB following exercise and thermal dehydration.

  6. Force transmission through the juvenile idiopathic arthritic wrist : a novel approach using a sliding rigid body spring model

    NARCIS (Netherlands)

    Manal, K; Lua, XP; Nieuwenhuis, MK; Helders, PJM; Buchanan, TS

    Force transmission across the wrist during a grasping maneuver of the hand was simulated for three children with juvenile idiopathic arthritis (JIA) and for one healthy age-matched child. Joint reaction forces were estimated using a series of springs between articulating bones. This method (i.e.,

  7. Optimal smoothing length scale for actuator line models of wind turbine blades based on Gaussian body force distribution: Wind energy, actuator line model

    Energy Technology Data Exchange (ETDEWEB)

    Martínez-Tossas, L. A. [Department of Mechanical Engineering, Johns Hopkins University, Baltimore 21218 MD USA; Churchfield, M. J. [National Renewable Energy Laboratory, Golden 80401 CO USA; Meneveau, C. [Department of Mechanical Engineering, Johns Hopkins University, Baltimore 21218 MD USA

    2017-01-20

    The actuator line model (ALM) is a commonly used method to represent lifting surfaces such as wind turbine blades within large-eddy simulations (LES). In the ALM, the lift and drag forces are replaced by an imposed body force that is typically smoothed over several grid points using a Gaussian kernel with some prescribed smoothing width e. To date, the choice of e has most often been based on numerical considerations related to the grid spacing used in LES. However, especially for finely resolved LES with grid spacings on the order of or smaller than the chord length of the blade, the best choice of e is not known. In this work, a theoretical approach is followed to determine the most suitable value of e, based on an analytical solution to the linearized inviscid flow response to a Gaussian force. We find that the optimal smoothing width eopt is on the order of 14%-25% of the chord length of the blade, and the center of force is located at about 13%-26% downstream of the leading edge of the blade for the cases considered. These optimal values do not depend on angle of attack and depend only weakly on the type of lifting surface. It is then shown that an even more realistic velocity field can be induced by a 2-D elliptical Gaussian lift-force kernel. Some results are also provided regarding drag force representation.

  8. Double-muscled and conventional cattle have the same net energy requirements if these are related to mature and current body protein mass, and to gain composition.

    Science.gov (United States)

    Schiavon, S; Bittante, G

    2012-11-01

    The hypothesis tested in this paper is that double-muscled (DBM) and conventional cattle, considerably differing in body composition, have similar NE requirements when: a) NE(m) is scaled as a function of current (P(i)) and adult (P(m)) protein mass; and b) ME for gain (ME(g)) is estimated from protein (Pr) and lipid (Lr) retention and their partial ME use efficiencies, the k(p) and k(l) values, respectively. First, 2 databases were examined: 1 was developed combining well known literature information from comparative slaughter trials conducted on British beef steers; the other was based on a trial conducted using extremely lean DBM Piemontese bulls. From the first database, NE(m) was calculated to be 1.625 × P(i) ÷ P(m) × P(m)(0.73) (MJ/kg(0.73)). From the second database, the daily ME(g) was determined as 22.8 MJ × Pr ÷ k(p) + 38.74 MJ × Lr ÷ k(l), assuming (from prior reports) that k(p) = 0.20 and k(l) = 0.75. Thereafter, ME(m) was defined as ME intake minus ME(g), and, hence, NE(m) was predicted as 1.625 × P(i) ÷ P(m) × P(m)(0.73) (where 1.625 was the value obtained from the first dataset). The resulting k(m) (NE(m)/ME(m)) averaged 0.67. This k(m) value did not differ from that (0.65; P = 0.12) predicted by Garrett's equation, which uses dietary ME content as the only predictive variable. Second, the procedure was tested for the ability to detect effects on k(m) caused by increasing BW and dietary factors not estimable from the dietary ME content only. Data were gathered from a trial involving 48 DBM Piemontese bulls divided into 4 groups fed 1 of 4 diets differing in CP content (145 or 108 g/kg DM), with or without addition of 80 g/d of rumen-protected CLA (rpCLA). Bulls were examined at 3 consecutive periods of growth, corresponding to 365, 512 and 631 kg of average BW. All energy balance items were influenced by increasing BW, except k(m) (P = 0.61), in agreement with the expectation that NE(m) requirement depends on the degree of maturity (P

  9. The Effects of Usual Intervention Versus Usual Intervention Plus Knowledge of Measured Resting Energy Expenditure on Body Weight and Body Fat in Active Duty Air Force Personnel

    National Research Council Canada - National Science Library

    Nelson, Heather

    2004-01-01

    ...: 25.2-36.2, enrolled in a Weight and Body Fat Management program Statistical Analysis: Descriptives, 2-sample t-tests, multiple linear regression, and ANOVA for mean differences between groups and time...

  10. Net Ecosystem Carbon Flux

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Net Ecosystem Carbon Flux is defined as the year-over-year change in Total Ecosystem Carbon Stock, or the net rate of carbon exchange between an ecosystem and the...

  11. Estimating 3D L5/S1 moments and ground reaction forces during trunk bending using a full-body ambulatory inertial motion capture system

    OpenAIRE

    Faber, G S; Chang, C. C.; Kingma, I.; Dennerlein, J.T.; van Dieen, J.H.

    2016-01-01

    Inertial motion capture (IMC) systems have become increasingly popular for ambulatory movement analysis. However, few studies have attempted to use these measurement techniques to estimate kinetic variables, such as joint moments and ground reaction forces (GRFs). Therefore, we investigated the performance of a full-body ambulatory IMC system in estimating 3D L5/S1 moments and GRFs during symmetric, asymmetric and fast trunk bending, performed by nine male participants. Using an ambulatory IM...

  12. Composição corporal e exigências líquidas proteicas de ovinos Santa Inês em crescimento Body composition and net protein requirements for growing Santa Inês sheep

    Directory of Open Access Journals (Sweden)

    José Gilson Louzada Regadas Filho

    2011-06-01

    Full Text Available Avaliou-se o efeito de diferentes níveis de energia metabolizável na dieta sobre a composição corporal e as exigências de proteína líquida de 24 ovinos Santa Inês em crescimento, não-castrados, com idade e peso corporal médio de 50 dias e 13,00 ± 0,56 kg. Após um período de adaptação de 10 dias, quatro animais foram abatidos para serem utilizados como referência para as estimativas do peso do corpo vazio (PCVZ e da composição corporal inicial dos demais. Os animais remanescentes foram distribuídos em um delineamento em blocos casualizados com rações contendo diferentes níveis de energia metabolizável (2,08; 2,28; 2,47 e 2,69 Mcal/kg MS e proteína bruta (12,74; 14,36; 15,97 e 17,65% PB na MS com cinco repetições. A excreção diária de N foi estimada extrapolando-se a equação de regressão de consumo de N (g/kg PC0,75/dia em função da retenção de N (g/kg PC0,75/dia para o consumo zero. A derivada da equação de regressão do logaritmo do conteúdo de proteína em função do logaritmo do PCVZ dos animais permitiu a estimativa da exigência proteica líquida para ganho de peso de corpo vazio (GPCVZ. A excreção diária de N foi estimada em 277 ± 0.05 mg/kg PC0,75/dia e a exigência de proteína líquida para mantença em 1,73 g/kg PC0,75/dia. O conteúdo de proteína no PCVZ dos animais diminui de 157,83 para 144,33 g/kg PCVZ quando o peso corporal aumentou de 15 para 30 kg, respectivamente. A quantidade de proteína depositada no ganho diminuiu de 137,47 para 125,71 g/kg GPCVZ com o aumento do peso corporal de 15 para 30 kg, respectivamente. A excreção fecal de nitrogênio e exigência líquida de proteína para mantença de ovinos Santa Inês em crescimento foi inferior ao preconizado pelos principais sistemas de avaliação de alimentos e exigências nutricionais para pequenos ruminantes.This study evaluated the effect of different dietary levels of metabolizable energy on the body composition and net

  13. Use of genotype × environment interaction model to accommodate genetic heterogeneity for residual feed intake, dry matter intake, net energy in milk, and metabolic body weight in dairy cattle.

    Science.gov (United States)

    Yao, C; de Los Campos, G; VandeHaar, M J; Spurlock, D M; Armentano, L E; Coffey, M; de Haas, Y; Veerkamp, R F; Staples, C R; Connor, E E; Wang, Z; Hanigan, M D; Tempelman, R J; Weigel, K A

    2017-03-01

    Feed efficiency in dairy cattle has gained much attention recently. Due to the cost-prohibitive measurement of individual feed intakes, combining data from multiple countries is often necessary to ensure an adequate reference population. It may then be essential to model genetic heterogeneity when making inferences about feed efficiency or selecting efficient cattle using genomic information. In this study, we constructed a marker × environment interaction model that decomposed marker effects into main effects and interaction components that were specific to each environment. We compared environment-specific variance component estimates and prediction accuracies from the interaction model analyses, an across-environment analyses ignoring population stratification, and a within-environment analyses using an international feed efficiency data set. Phenotypes included residual feed intake, dry matter intake, net energy in milk, and metabolic body weight from 3,656 cows measured in 3 broadly defined environments: North America (NAM), the Netherlands (NLD), and Scotland (SAC). Genotypic data included 57,574 single nucleotide polymorphisms per animal. The interaction model gave the highest prediction accuracy for metabolic body weight, which had the largest estimated heritabilities ranging from 0.37 to 0.55. The within-environment model performed the best when predicting residual feed intake, which had the lowest estimated heritabilities ranging from 0.13 to 0.41. For traits (dry matter intake and net energy in milk) with intermediate estimated heritabilities (0.21 to 0.50 and 0.17 to 0.53, respectively), performance of the 3 models was comparable. Genomic correlations between environments also were computed using variance component estimates from the interaction model. Averaged across all traits, genomic correlations were highest between NAM and NLD, and lowest between NAM and SAC. In conclusion, the interaction model provided a novel way to evaluate traits measured in

  14. Professional Enterprise NET

    CERN Document Server

    Arking, Jon

    2010-01-01

    Comprehensive coverage to help experienced .NET developers create flexible, extensible enterprise application code If you're an experienced Microsoft .NET developer, you'll find in this book a road map to the latest enterprise development methodologies. It covers the tools you will use in addition to Visual Studio, including Spring.NET and nUnit, and applies to development with ASP.NET, C#, VB, Office (VBA), and database. You will find comprehensive coverage of the tools and practices that professional .NET developers need to master in order to build enterprise more flexible, testable, and ext

  15. Intra-operative rewarming with Hot Dog(®) resistive heating and forced-air heating: a trial of lower-body warming.

    Science.gov (United States)

    Röder, G; Sessler, D I; Roth, G; Schopper, C; Mascha, E J; Plattner, O

    2011-08-01

    Resistive heating is an alternative to forced-air warming which is currently the most commonly used intra-operative warming system. We therefore tested the hypothesis that rewarming rates are similar with Hot Dog(®) (Augustine Biomedical) resistive and Bair Hugger(®) (Arizant) forced-air heating systems. We evaluated 28 patients having major maxillary tumour surgery. During the establishment of invasive monitoring, patients became hypothermic, dropping their core temperature to about 35 °C. They were then randomly assigned to rewarming with lower-body resistive (n = 14) or forced-air (n = 14) heating, with each system set to 'high'. Our primary outcome was the rewarming rate during active heating over a core temperature range from 35 to 37 °C. Morphometric characteristics were comparable in both groups. Temperature increased at twice the rate in patients assigned to forced-air warming, with an estimated mean (SE) slope of 0.49 (0.03) °C.h(-1) vs 0.24 (0.02) °C.h(-1) (p Resistive heating warmed at half the rate of forced air. © 2011 The Authors. Anaesthesia © 2011 The Association of Anaesthetists of Great Britain and Ireland.

  16. Composição corporal e exigências líquidas de macroelementos minerais de bovinos F1 Simental x Nelore Body composition and net requirements of macroelement minerals of F1 Simental x Nellore bulls

    Directory of Open Access Journals (Sweden)

    Marcelo de Andrade Ferreira

    1999-04-01

    Full Text Available Os efeitos de diferentes níveis de concentrado nas rações sobre as exigências líquidas de Ca, P, Mg, Na e K foram estudados. Vinte e nove bovinos F1 Nelore x Simental, machos não-castrados, com, em média, 17 meses de idade e 354 kg PV inicial, foram usados. Cinco animais foram abatidos ao início do experimento, como referência, e o restante foi distribuído nos tratamentos, de forma inteiramente casualizada, de acordo com os diferentes níveis de concentrado nas rações: 25,0; 37,5; 50,0; 62,5; e 75,0%. Os animais foram alimentados à vontade até o peso de abate pré-estabelecido de 500 kg PV. Equações de regressão do logaritmo das quantidades dos macroelementos minerais, em relação ao logaritmo do peso do corpo vazio (PCV, foram ajustadas. Derivando-se as referidas regressões, encontraram-se as exigências líquidas para ganho de 1 kg PCV. As exigências líquidas de Ca, P, Mg, Na e K para ganho de 1 kg de PCV, para um animal de 400 kg PV, usando-se a equação geral, foram, respectivamente, 10,33; 4,68; 0,30; 1,25; e 1,46 g. As concentrações dos minerais, no peso de corpo vazio, diminuíram com o aumento do PCV.The effects of different dietary concentrate levels on the net requirements of Ca, P, Mg, Na and potassium (K were studied. Twenty-nine F1 Simental x Nellore bulls, averaging 17 months of age and initial LW of 354 kg, were used. Five animals were slaughtered at the beginning of the experiment as a reference and the remainders were allotted to a completely randomized design, according to the different dietary concentrate levels: 25.0, 37.50, 50,0, 62.5, and 75.0%. The animals were were full fed until a pre-established slaughter weight of 500 kg. The logarithm of mineral macroelement amounts were regressed on the logarithm of empty body weight (EBW. By deriving those regression equations, the net requirements for 1 kg EBW were found. The net requirements of Ca, P, Mg, Na and K for 1 kg EBW gain for an animal of 400 kg

  17. Net joint kinetics in the limbs of pigs walking on concrete floor in dry and contaminated conditions

    DEFF Research Database (Denmark)

    Thorup, V M; Laursen, B; Jensen, R B

    2008-01-01

    and hindlimbs of healthy pigs walking on solid concrete floors. Second, this study aimed to examine the effect of floor condition on the net joint kinetics. Kinematic (50-Hz video recordings) and kinetic (1-kHz force plate measurements) data were collected from 30 pigs and combined with body segment parameters...... from a cadaver study. Net joint kinetics was calculated by using a 2-dimensional inverse dynamic solution. Inverse dynamics have, to our knowledge, not been applied in pigs before. Dry, greasy, and wet floor conditions were tested with 10 pigs each. In the forelimbs, peak joint moment was less (P

  18. The Distribution of Body Weight Force on Toe and Heel before and after Exercise Therapy in Children with Spastic Diplegia Cerebral Palsy

    Directory of Open Access Journals (Sweden)

    Keyvan Sharif-Moradi

    2005-07-01

    Full Text Available Objective: The purpose of this study was to assess the distribution of body weight force on toe and heel before and after exercise therapy and its effects on relaxation of children with spastic diplegia cerebral palsy. Materials & Methods: Ten children with spastic diplegia cerebral palsy between 8 to15 years of age participated in this study. Their mean weight and height were (30.8kg ± 5.7kg and (1.35m±0.09m respectively. Subjects underwent a 12 weeks of exercise therapy. A dynamic stability platform system (BIODEX was used to measure the mean percentage of body weight pressure on toe and heal. The balance tests were repeated on stable, almost stable and unstable base of support as well as with and without shoes. Results: Showed that the mean percentage of body weight pressure on toe and heal after exercise therapy was not significant (p>0.05. The mean percentage of body weight pressure on toe and heal was significantly decrease after exercise therapy in both with and without shoes (p<0.05. The greatest improvement achieved on almost stable and unstable conditions. Wearing shoes resulted in a balance percentage of body weight pressure on toe and heal on stable situation of stability platform the percentage of body weight pressure on toe and heal has no difference before and after exercise therapy. After exercise therapy strengthening the muscle of the ankle joint balance the percentage of body weight pressure on toe and heal. Wearing shoes decrease the muscle stretch and therefore balance the percentage of body weight pressure on toe and heal. Conclusion: The flexibility of spastic muscle and strengthening of the relax muscle must be perform. This result provides good information for physician in recognizing and therapy impacts on cerebral palsy children.

  19. A comprehensive three-dimensional dynamic model of the human head and trunk for estimating lumbar and cervical joint torques and forces from upper body kinematics.

    Science.gov (United States)

    Vette, Albert H; Yoshida, Takashi; Thrasher, T Adam; Masani, K; Popovic, Milos R

    2012-06-01

    Linked-segment representations of human body dynamics have been used extensively in biomechanics, ergonomics, and rehabilitation research to systemize thinking, make predictions, and suggest novel experiments. In the scope of upper body biomechanics, these models play an even more essential role as the human spine dynamics are difficult to study in vivo. No study exists to date, however, that specifically disseminates the technical details of a comprehensive three-dimensional model of the upper body for the purpose of estimating spinal joint torques and forces for a wide range of scenarios. Consequently, researchers are still bound to develop and implement their own models. Therefore, the objective of this study was to design a dynamic model of the upper body that can comprehensively estimate spinal joint torques and forces from upper body kinematics. The proposed three-dimensional model focuses on the actions of the lumbar and cervical vertebrae and consists of five lumbar segments (L1 to L5), the thorax, six cervical segments (C2 to C7), and the head. Additionally, the model: (1) is flexible regarding the kinematic nature of the spinal joints (free, constrained, or fixed); (2) incorporates all geometric and mass-inertia parameters from a single, high-resolution source; and (3) can be feasibly implemented via different inverse dynamics formulations. To demonstrate its practicality, the model was finally employed to estimate the lumbar and cervical joint torques during perturbed sitting using experimental motion data. Considering the growing importance of mathematical predictions, the developed model should become an important resource for researchers in different fields. Copyright © 2011 IPEM. Published by Elsevier Ltd. All rights reserved.

  20. Associations of force plate and body-mounted inertial sensor measurements for identification of hind limb lameness in horses.

    Science.gov (United States)

    Bell, Rhodes P; Reed, Shannon K; Schoonover, Mike J; Whitfield, Chase T; Yonezawa, Yoshiharu; Maki, Hiromitchi; Pai, P Frank; Keegan, Kevin G

    2016-04-01

    To investigate associations between inertial sensor and stationary force plate measurements of hind limb lameness in horses. 21 adult horses with no lameness or with mild hind limb lameness. Horses were instrumented with inertial sensors and evaluated for lameness with a stationary force plate while trotting in a straight line. Inertial sensor-derived measurements of maximum and minimum pelvic height differences between right and left halves of the stride were compared with vertical and horizontal ground reaction forces (GRFs). Stepwise linear regression was performed to investigate the strength of association between inertial sensor measurements of hind limb lameness and amplitude, impulse, and time indices of important events in the vertical and horizontal GRF patterns. Difference in minimum pelvic position was moderately (Ra(2) = 0.60) associated with the difference in peak vertical GRF but had little association with any horizontal GRF measurements. Difference in maximum pelvic position was strongly (Ra(2) = 0.77) associated with a transfer of vertical to horizontal ground reaction impulse in the second half of the stance but was not associated with difference in peak vertical GRF. Inertial sensor-derived measurements of asymmetric pelvic fall (difference in minimum pelvic position) indicated a decrease in vertical GRF, but similar measurements of asymmetric pelvis rise (difference in maximum pelvic position) indicated a transfer of vertical to horizontal force impulse in the second half of the stance. Evaluation of both pelvic rise and fall may be important when assessing hind limb lameness in horses.

  1. Muscle activation and estimated relative joint force during running with weight support on a lower-body positive pressure treadmill

    DEFF Research Database (Denmark)

    Jensen, Bente Rona; Hovgaard-Hansen, Line; Cappelen, Katrine Louise

    2016-01-01

    estimated. Leg muscles responded differently to unweighting during running, reflecting different relative contribution to propulsion and anti-gravity forces. At 20%BW, knee extensor EMGpeak decreased to 22% at 2.22 m/s and 28% at 3.33 m/s of 100%BW values. Plantar flexors decreased to 52% and 58% at 20%BW...

  2. WaveNet

    Science.gov (United States)

    2015-10-30

    Coastal Inlets Research Program WaveNet WaveNet is a web-based, Graphical-User-Interface ( GUI ) data management tool developed for Corps coastal...generates tabular and graphical information for project planning and design documents. The WaveNet is a web-based GUI designed to provide users with a...data from different sources, and employs a combination of Fortran, Python and Matlab codes to process and analyze data for USACE applications

  3. Changes in muscle cross-sectional area, muscle force, and jump performance during 6 weeks of progressive whole-body vibration combined with progressive, high intensity resistance training

    Science.gov (United States)

    Rosenberger, A.; Beijer, Å.; Johannes, B.; Schoenau, E.; Mester, J.; Rittweger, J.; Zange, J.

    2017-01-01

    Objectives: We hypothesized that progressive whole-body vibration (WBV) superimposed to progressive high intensity resistance training has greater effects on muscle cross-sectional area (CSA), muscle force of leg muscles, and jump performance than progressive high intensity resistance training alone. Methods: Two groups of healthy male subjects performed either 6 weeks of Resistive Vibration Exercise (RVE, squats and heel raises with WBV, n=13) or Resistive Exercise (RE, squats and heel raises without WBV, n=13). Squats under RVE required indispensable weight loading on the forefoot to damp harmful vibrations to the head. Time, intervention, and interaction effects were analyzed. Results: After 6 weeks of training, knee extensor CSA, isometric knee extension force, and counter movement jump height increased equally in both groups (time effect, Ptraining effects than RE only in plantar flexor muscles. RVE seems to be suitable in professional sports with a special focus on calf muscles. PMID:28574410

  4. Coloured Petri Nets

    DEFF Research Database (Denmark)

    Jensen, Kurt

    1991-01-01

    This paper describes how Coloured Petri Nets (CP-nets) have been developed — from being a promising theoretical model to being a full-fledged language for the design, specification, simulation, validation and implementation of large software systems (and other systems in which human beings and...... use of CP-nets — because it means that the function representation and the translations (which are a bit mathematically complex) no longer are parts of the basic definition of CP-nets. Instead they are parts of the invariant method (which anyway demands considerable mathematical skills...

  5. Game Coloured Petri Nets

    DEFF Research Database (Denmark)

    Westergaard, Michael

    2006-01-01

    This paper introduces the notion of game coloured Petri nets. This allows the modeler to explicitly model what parts of the model comprise the modeled system and what parts are the environment of the modeled system. We give the formal definition of game coloured Petri nets, a means of reachability...... analysis of this net class, and an application of game coloured Petri nets to automatically generate easy-to-understand visualizations of the model by exploiting the knowledge that some parts of the model are not interesting from a visualization perspective (i.e. they are part of the environment...

  6. Programming NET Web Services

    CERN Document Server

    Ferrara, Alex

    2007-01-01

    Web services are poised to become a key technology for a wide range of Internet-enabled applications, spanning everything from straight B2B systems to mobile devices and proprietary in-house software. While there are several tools and platforms that can be used for building web services, developers are finding a powerful tool in Microsoft's .NET Framework and Visual Studio .NET. Designed from scratch to support the development of web services, the .NET Framework simplifies the process--programmers find that tasks that took an hour using the SOAP Toolkit take just minutes. Programming .NET

  7. Annotating Coloured Petri Nets

    DEFF Research Database (Denmark)

    Lindstrøm, Bo; Wells, Lisa Marie

    2002-01-01

    -net. An example of such auxiliary information is a counter which is associated with a token to be able to do performance analysis. Modifying colour sets and arc inscriptions in a CP-net to support a specific use may lead to creation of several slightly different CP-nets – only to support the different uses...... a method which makes it possible to associate auxiliary information, called annotations, with tokens without modifying the colour sets of the CP-net. Annotations are pieces of information that are not essential for determining the behaviour of the system being modelled, but are rather added to support...

  8. Methodologies to determine forces on bones and muscles of body segments during exercise, employing compact sensors suitable for use in crowded space vehicles

    Science.gov (United States)

    Figueroa, Fernando

    1995-01-01

    Work under this grant was carried out by the author and by a graduate research assistant. An instrumented bicycle ergometer was implemented focusing on the stated objective: to estimate the forces exerted by each muscle of the feet, calf, and thigh of an individual while bicycling. The sensors used were light and compact. These were probes to measure muscle EMG activity, miniature accelerometers, miniature load sensors, and small encoders to measure angular positions of the pedal. A methodology was developed and implemented to completely describe the kinematics of the limbs using data from the sensors. This work has been published as a Master's Thesis by the Graduate student supported by the grant. The instrumented ergometer along with the sensors and instrumentation were tested during a KC-135 Zero-Gravity flight in July, 1994. A complete description of the system and the tests performed have been published as a report submitted to NASA Johnson Space Center. The data collected during the KC-135 flight is currently being processed so that a kinematic description of the bicycling experiment will be soon determined. A methodology to estimate the muscle forces has been formulated based on previous work. The methodology involves the use of optimization concepts so that the individual muscle forces that represent variables in dynamic equations of motion may be estimated. Optimization of a criteria (goal) function such as minimization of energy will be used along with constraint equations defined by rigid body equations of motion. Use of optimization principles is necessary, because the equations of motion alone constitute an indeterminate system of equations with respect to the large amount of muscle forces which constitute the variables in these equations. The number of variables is reduced somewhat by using forces measured by the load cells installed on the pedal. These load cells measure pressure and shear forces on the foot. The author and his collaborators at NASA

  9. High-order post-Newtonian contributions to the two-body gravitational interaction potential from analytical gravitational self-force calculations

    CERN Document Server

    Bini, Donato

    2013-01-01

    We extend the analytical determination of the main radial potential describing (within the effective one-body formalism) the gravitational interaction of two bodies beyond the 4th post-Newtonian approximation recently obtained by us. This extension is done to linear order in the mass ratio by applying analytical gravitational self-force theory (for a particle in circular orbit around a Schwarzschild black hole) to Detweiler's gauge-invariant redshift variable. By using the version of black hole perturbation theory developed by Mano, Suzuki and Takasugi, we have pushed the analytical determination of the (linear in mass ratio) radial potential to the 6th post-Newtonian order (passing through 5 and 5.5 post-Newtonian terms). In principle, our analytical method can be extended to arbitrarily high post-Newtonian orders.

  10. Net zero water

    CSIR Research Space (South Africa)

    Lindeque, M

    2013-01-01

    Full Text Available Is it possible to develop a building that uses a net zero amount of water? In recent years it has become evident that it is possible to have buildings that use a net zero amount of electricity. This is possible when the building is taken off...

  11. SolNet

    DEFF Research Database (Denmark)

    Jordan, Ulrike; Vajen, Klaus; Bales, Chris

    2014-01-01

    SolNet, founded in 2006, is the first coordinated International PhD education program on Solar Thermal Engineering. The SolNet network is coordinated by the Institute of Thermal Engineering at Kassel University, Germany. The network offers PhD courses on solar heating and cooling, conference...

  12. Kunstige neurale net

    DEFF Research Database (Denmark)

    Hørning, Annette

    1994-01-01

    Artiklen beskæftiger sig med muligheden for at anvende kunstige neurale net i forbindelse med datamatisk procession af naturligt sprog, specielt automatisk talegenkendelse.......Artiklen beskæftiger sig med muligheden for at anvende kunstige neurale net i forbindelse med datamatisk procession af naturligt sprog, specielt automatisk talegenkendelse....

  13. Influence of Whole Body Vibration and Specific Warm-ups on Force during an Isometric Mid-Thigh Pull

    Directory of Open Access Journals (Sweden)

    Vanessa L. Cazás-Moreno

    2015-10-01

    Full Text Available Purpose: The purpose of this study was to investigate the effects of general and specific warm-up protocols on rate of force development (RFD, relative RFD (rRFD, ground reaction force (GRF and relative ground reaction force (rGRF during an isometric mid-thigh pull (IMTP, after WBV exposure. Methods: Fifteen healthy recreationally trained males  (age: 24.1 ± 2.3 yrs, height: 72.9 ± 7.8 cm; mass: 86.9 ± 8.3 completed five protocols: baseline, isometric vibration (iVib, isometric no vibration (iNV, dynamic vibration (dVib and dynamic no vibration (dNV. The baseline was completed without any warm-up prior to the IMTP. The intervention protocols had the same prescription of 4 sets of 30-second bouts of quarter squats (dynamic [DQS] and isometric [IQS] on the WBV platform with or without vibration. Following a one-minute rest period after each protocol, participants completed three maximal IMTPs. Results: Repeated measures ANOVA with a Bonferroni post hoc demonstrated that RFD in dNV (7657.8 ± 2292.5 N/s was significantly greater than iVib (7156.4 ± 2170.0 N/s. However, the other experimental trials for RFD demonstrated no significant differences (p>0.05. There were also no significant differences for rRFD, GRF or rGRF between protocols. Conclusion: These results demonstrate that a dynamic warm-up without WBV elicits greater RFD than an isometric warm-up with WBV prior to a maximal isometric exercise. Further research needs to be investigated utilizing dynamic and isometric warm-ups in conjunction with WBV and power output. Keywords: males, recreationally trained, power

  14. Patterns of maximum body size evolution in Cenozoic land mammals: eco-evolutionary processes and abiotic forcing

    Science.gov (United States)

    Saarinen, Juha J.; Boyer, Alison G.; Brown, James H.; Costa, Daniel P.; Ernest, S. K. Morgan; Evans, Alistair R.; Fortelius, Mikael; Gittleman, John L.; Hamilton, Marcus J.; Harding, Larisa E.; Lintulaakso, Kari; Lyons, S. Kathleen; Okie, Jordan G.; Sibly, Richard M.; Stephens, Patrick R.; Theodor, Jessica; Uhen, Mark D.; Smith, Felisa A.

    2014-01-01

    There is accumulating evidence that macroevolutionary patterns of mammal evolution during the Cenozoic follow similar trajectories on different continents. This would suggest that such patterns are strongly determined by global abiotic factors, such as climate, or by basic eco-evolutionary processes such as filling of niches by specialization. The similarity of pattern would be expected to extend to the history of individual clades. Here, we investigate the temporal distribution of maximum size observed within individual orders globally and on separate continents. While the maximum size of individual orders of large land mammals show differences and comprise several families, the times at which orders reach their maximum size over time show strong congruence, peaking in the Middle Eocene, the Oligocene and the Plio-Pleistocene. The Eocene peak occurs when global temperature and land mammal diversity are high and is best explained as a result of niche expansion rather than abiotic forcing. Since the Eocene, there is a significant correlation between maximum size frequency and global temperature proxy. The Oligocene peak is not statistically significant and may in part be due to sampling issues. The peak in the Plio-Pleistocene occurs when global temperature and land mammal diversity are low, it is statistically the most robust one and it is best explained by global cooling. We conclude that the macroevolutionary patterns observed are a result of the interplay between eco-evolutionary processes and abiotic forcing. PMID:24741007

  15. Pro NET Best Practices

    CERN Document Server

    Ritchie, Stephen D

    2011-01-01

    Pro .NET Best Practices is a practical reference to the best practices that you can apply to your .NET projects today. You will learn standards, techniques, and conventions that are sharply focused, realistic and helpful for achieving results, steering clear of unproven, idealistic, and impractical recommendations. Pro .NET Best Practices covers a broad range of practices and principles that development experts agree are the right ways to develop software, which includes continuous integration, automated testing, automated deployment, and code analysis. Whether the solution is from a free and

  16. Getting to Net Zero

    Energy Technology Data Exchange (ETDEWEB)

    2016-09-01

    The technology necessary to build net zero energy buildings (NZEBs) is ready and available today, however, building to net zero energy performance levels can be challenging. Energy efficiency measures, onsite energy generation resources, load matching and grid interaction, climatic factors, and local policies vary from location to location and require unique methods of constructing NZEBs. It is recommended that Components start looking into how to construct and operate NZEBs now as there is a learning curve to net zero construction and FY 2020 is just around the corner.

  17. Instant Lucene.NET

    CERN Document Server

    Heydt, Michael

    2013-01-01

    Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. A step-by-step guide that helps you to index, search, and retrieve unstructured data with the help of Lucene.NET.Instant Lucene.NET How-to is essential for developers new to Lucene and Lucene.NET who are looking to get an immediate foundational understanding of how to use the library in their application. It's assumed you have programming experience in C# already, but not that you have experience with search techniques such as information retrieval theory (although there will be a l

  18. About the nature of intermolecular three-body forces in ionic systems: The case of protonated hydrates

    Science.gov (United States)

    Kelterbaum, R.; Turki, N.; Rahmouni, A.; Kochanski, E.

    1994-01-01

    The three-body intermolecular energy is computed for the water/oxonium ion/water system from ab initio self-consistent-field (SCF) calculations and 170 geometrical configurations. It is decomposed into two parts: ΔE1stnonadd is obtained at the first iteration of the calculation and ΔEdelocnonadd is due to the following iterations till convergency. The nonadditive three-body energy, Eindnonadd, is computed from the perturbation theory. It is shown that all these energy components can be either attractive or repulsive according to the geometry. Edelocnonadd is often seriously different of Eindnonadd, a nonadditive ``induction-exchange'' term being sometimes as large as Eindnonadd. In most cases, this ``induction-exchange'' term is much larger than E1stnonadd, with the same sign. This suggests that these two terms can be approximated by a same expression, but because of the sign, more than one exponential term should be used. An approximation of Eindnonadd is discussed with a particular attention to the range of the validity according to the intermolecular distances.

  19. Net Zero Energy Buildings

    DEFF Research Database (Denmark)

    Marszal, Anna Joanna; Bourrelle, Julien S.; Musall, Eike

    2010-01-01

    and identify possible renewable energy supply options which may be considered in calculations. Finally, the gap between the methodology proposed by each organisation and their respective national building code is assessed; providing an overview of the possible changes building codes will need to undergo......The international cooperation project IEA SHC Task 40 / ECBCS Annex 52 “Towards Net Zero Energy Solar Buildings”, attempts to develop a common understanding and to set up the basis for an international definition framework of Net Zero Energy Buildings (Net ZEBs). The understanding of such buildings...... parameters used in the calculations are discussed and the various renewable supply options considered in the methodologies are summarised graphically. Thus, the paper helps to understand different existing approaches to calculate energy balance in Net ZEBs, highlights the importance of variables selection...

  20. PhysioNet

    Data.gov (United States)

    U.S. Department of Health & Human Services — The PhysioNet Resource is intended to stimulate current research and new investigations in the study of complex biomedical and physiologic signals. It offers free...

  1. NetSig

    DEFF Research Database (Denmark)

    Horn, Heiko; Lawrence, Michael S; Chouinard, Candace R

    2018-01-01

    Methods that integrate molecular network information and tumor genome data could complement gene-based statistical tests to identify likely new cancer genes; but such approaches are challenging to validate at scale, and their predictive value remains unclear. We developed a robust statistic (Net......Sig) that integrates protein interaction networks with data from 4,742 tumor exomes. NetSig can accurately classify known driver genes in 60% of tested tumor types and predicts 62 new driver candidates. Using a quantitative experimental framework to determine in vivo tumorigenic potential in mice, we found that Net......Sig candidates induce tumors at rates that are comparable to those of known oncogenes and are ten-fold higher than those of random genes. By reanalyzing nine tumor-inducing NetSig candidates in 242 patients with oncogene-negative lung adenocarcinomas, we find that two (AKT2 and TFDP2) are significantly amplified...

  2. Knowledge-in-action: a study on the integration of forces and energy in a rigid body

    Directory of Open Access Journals (Sweden)

    Consuelo Escudero

    2009-03-01

    Full Text Available This paper intends to go on with the study of problem solving in a compatible way with the theories of conceptual fields (TCC of Vergnaud (1990,1994,1998 and mental models of Johnson-Laird (1983,1990. Together with findings of another study (Escudero & Jaime 2007, some achievements and difficulties of freshmore engineering students when solving problems of the motion of rigid body in terms of the knowledge-in-action are analysed. The research methodology under a qualitative paradigm grouped data into categories which are not provided a priori by the theoretical framework. It can be said that the quality of the conceptual representation has been explicit in the quality of the proposed solution. Some meanings introduced by students in their problem solving activities can be characterized as operational invariants.

  3. TideNet

    Science.gov (United States)

    2015-10-30

    query tide data sources in a desired geographic region of USA and its territories (Figure 1). Users can select a tide data source through the Google Map ...select data sources according to the desired geographic region. It uses the Google Map interface to display data from different sources. Recent...Coastal Inlets Research Program TideNet The TideNet is a web-based Graphical User Interface (GUI) that provides users with GIS mapping tools to

  4. Building Neural Net Software

    OpenAIRE

    Neto, João Pedro; Costa, José Félix

    1999-01-01

    In a recent paper [Neto et al. 97] we showed that programming languages can be translated on recurrent (analog, rational weighted) neural nets. The goal was not efficiency but simplicity. Indeed we used a number-theoretic approach to machine programming, where (integer) numbers were coded in a unary fashion, introducing a exponential slow down in the computations, with respect to a two-symbol tape Turing machine. Implementation of programming languages in neural nets turns to be not only theo...

  5. Interaction Nets in Russian

    OpenAIRE

    Salikhmetov, Anton

    2013-01-01

    Draft translation to Russian of Chapter 7, Interaction-Based Models of Computation, from Models of Computation: An Introduction to Computability Theory by Maribel Fernandez. "In this chapter, we study interaction nets, a model of computation that can be seen as a representative of a class of models based on the notion of 'computation as interaction'. Interaction nets are a graphical model of computation devised by Yves Lafont in 1990 as a generalisation of the proof structures of linear logic...

  6. Programming NET 35

    CERN Document Server

    Liberty, Jesse

    2009-01-01

    Bestselling author Jesse Liberty and industry expert Alex Horovitz uncover the common threads that unite the .NET 3.5 technologies, so you can benefit from the best practices and architectural patterns baked into the new Microsoft frameworks. The book offers a Grand Tour" of .NET 3.5 that describes how the principal technologies can be used together, with Ajax, to build modern n-tier and service-oriented applications. "

  7. An Improved Computational Technique for Calculating Electromagnetic Forces and Power Absorptions Generated in Spherical and Deformed Body in Levitation Melting Devices

    Science.gov (United States)

    Zong, Jin-Ho; Szekely, Julian; Schwartz, Elliot

    1992-01-01

    An improved computational technique for calculating the electromagnetic force field, the power absorption and the deformation of an electromagnetically levitated metal sample is described. The technique is based on the volume integral method, but represents a substantial refinement; the coordinate transformation employed allows the efficient treatment of a broad class of rotationally symmetrical bodies. Computed results are presented to represent the behavior of levitation melted metal samples in a multi-coil, multi-frequency levitation unit to be used in microgravity experiments. The theoretical predictions are compared with both analytical solutions and with the results or previous computational efforts for the spherical samples and the agreement has been very good. The treatment of problems involving deformed surfaces and actually predicting the deformed shape of the specimens breaks new ground and should be the major usefulness of the proposed method.

  8. Effect of Perturbations in Coriolis and Centrifugal Forces on the Nonlinear Stability of Equilibrium Point in Robe's Restricted Circular Three-Body Problem

    Directory of Open Access Journals (Sweden)

    P. P. Hallan

    2008-01-01

    Full Text Available The effect of perturbations in Coriolis and cetrifugal forces on the nonlinear stability of the equilibrium point of the Robe's (1977 restricted circular three-body problem has been studied when the density parameter K is zero. By applying Kolmogorov-Arnold-Moser (KAM theory, it has been found that the equilibrium point is stable for all mass ratios μ in the range of linear stability 8/9+(2/3((43/25ϵ1−(10/3ϵ<μ<1, where ϵ and ϵ1 are, respectively, the perturbations in Coriolis and centrifugal forces, except for five mass ratios μ1=0.93711086−1.12983217ϵ+1.50202694ϵ1, μ2 = 0.9672922−0.5542091ϵ+ 1.2443968ϵ1, μ3=0.9459503−0.70458206ϵ+ 1.28436549ϵ1, μ4=0.9660792−0.30152273ϵ + 1.11684064ϵ1, μ5=0.893981−2.37971679ϵ + 1.22385421ϵ1, where the theory is not applicable.

  9. Countermovement jump peak force relative to body weight and jump height as predictors for sprint running performances: (in)homogeneity of track and field athletes?

    Science.gov (United States)

    Markström, Jonas L; Olsson, Carl-Johan

    2013-04-01

    The purpose of this study was to investigate: (a) If variables from 1-leg drop jump (DJ), DJ, squat jump (SJ), and countermovement jump (CMJ) tests can predict sprint performances for sprinters. (b) If sprinters and jumpers can be distinguished based on variables from 1-leg DJ, DJ, SJ, and CMJ tests, also if sprinters and throwers can be distinguished based on variables from stiff leg jump (SLJ), SJ, and CMJ tests. A single linear regression and multiple linear regression analysis approach with models including 2 or 3 variables were used when predicting sprint performances. Five elite sprinters (1 woman) participated in the first subexamination and 5 sprinters (1 woman) vs. 5 jumpers and 6 sprinters vs. 6 throwers (4 women) participated in the second. The force variable CMJ peak force (PF) relative to body weight significantly predicted the sprint performances maximal running velocity through 10-m (V[Combining Dot Above]O2max10m) and 60-m time. The Vmax10m was also predicted by CMJ height. Jump heights from SJ and DJ did not predict sprint performances. The between-group analysis of the athletes showed a nonsignificant group difference with respect to the jump variables. However, planned comparisons between sprinters and throwers showed significant differences in a number of SLJ variables. When constructing training programs for sprinters, the aim should be to improve CMJ PF and CMJ height because of the prediction of Vmax10-m and 60-m time, presumably because of velocity specificity components.

  10. Nutritional status of children and adolescents based on body mass index: agreement between World Health Organization and International Obesity Task Force.

    Science.gov (United States)

    Cavazzotto, Timothy Gustavo; Brasil, Marcos Roberto; Oliveira, Vinicius Machado; da Silva, Schelyne Ribas; Ronque, Enio Ricardo V; Queiroga, Marcos Roberto; Serassuelo Junior, Helio

    2014-03-01

    To investigate the agreement between two international criteria for classification of children and adolescents nutritional status. The study included 778 girls and 863 boys aged from six to 13 years old. Body mass and height were measured and used to calculate the body mass index. Nutritional status was classified according to the cut-off points defined by the World Health Organization and the International Obesity Task Force. The agreement was evaluated using Kappa statistic and weighted Kappa. In order to classify the nutritional status, the agreement between the criteria was higher for the boys (Kappa 0.77) compared to girls (Kappa 0.61). The weighted Kappa was also higher for boys (0.85) in comparison to girls (0.77). Kappa index varied according to age. When the nutritional status was classified in only two categories--appropriate (thinness + accentuated thinness + eutrophy) and overweight (overweight + obesity + severe obesity)--, the Kappa index presented higher values than those related to the classification in six categories. A substantial agreement was observed between the criteria, being higher in males and varying according to the age.

  11. Analytic determination of the eight-and-a-half post-Newtonian self-force contributions to the two-body gravitational interaction potential

    CERN Document Server

    Bini, Donato

    2014-01-01

    We {\\it analytically} compute, to the eight-and-a-half post-Newtonian order, and to linear order in the mass ratio, the radial potential describing (within the effective one-body formalism) the gravitational interaction of two bodies, thereby extending previous analytic results. These results are obtained by applying analytical gravitational self-force theory (for a particle in circular orbit around a Schwarzschild black hole) to Detweiler's gauge-invariant redshift variable. We emphasize the increase in \\lq\\lq transcendentality" of the numbers entering the post-Newtonian expansion coefficients as the order increases, in particular we note the appearance of $\\zeta(3)$ (as well as the square of Euler's constant $\\gamma$) starting at the seventh post-Newtonian order. We study the convergence of the post-Newtonian expansion as the expansion parameter $u=GM/(c^2r)$ leaves the weak-field domain $u\\ll 1$ to enter the strong field domain $u=O(1)$.

  12. Numerical Simulation of Wave Interaction with Moving Net Structures

    DEFF Research Database (Denmark)

    Chen, Hao; Christensen, Erik Damgaard

    2015-01-01

    was described as a sheet of porous media with prescribed rigid body motion and mesh motion was incorporated to conform the motion of the net. Free surface wave generation and absorption framework was also introduced to simulate wave interaction with moving net structures. The results showed that mesh motion...

  13. La plataforma .NET

    OpenAIRE

    Fornas Estrada, Miquel

    2008-01-01

    L'aparició de la plataforma .NET Framework ha suposat un canvi molt important en la forma de crear i distribuir aplicacions, degut a que incorpora una sèrie d'innovacions tècniques i productives que simplifiquen molt les tasques necessàries per desenvolupar un projecte. La aparición de la plataforma. NET Framework ha supuesto un cambio muy importante en la forma de crear y distribuir aplicaciones, debido a que incorpora una serie de innovaciones técnicas y productivas que simplifican mucho...

  14. Biological Petri Nets

    CERN Document Server

    Wingender, E

    2011-01-01

    It was suggested some years ago that Petri nets might be well suited to modeling metabolic networks, overcoming some of the limitations encountered by the use of systems employing ODEs (ordinary differential equations). Much work has been done since then which confirms this and demonstrates the usefulness of this concept for systems biology. Petri net technology is not only intuitively understood by scientists trained in the life sciences, it also has a robust mathematical foundation and provides the required degree of flexibility. As a result it appears to be a very promising approach to mode

  15. Forcing lateral electron disequilibrium to spare lung tissue: a novel technique for stereotactic body radiation therapy of lung cancer

    Science.gov (United States)

    Disher, Brandon; Hajdok, George; Gaede, Stewart; Mulligan, Matthew; Battista, Jerry J.

    2013-10-01

    Stereotactic body radiation therapy (SBRT) has quickly become a preferred treatment option for early-stage lung cancer patients who are ineligible for surgery. This technique uses tightly conformed megavoltage (MV) x-ray beams to irradiate a tumour with ablative doses in only a few treatment fractions. Small high energy x-ray fields can cause lateral electron disequilibrium (LED) to occur within low density media, which can reduce tumour dose. These dose effects may be challenging to predict using analytic dose calculation algorithms, especially at higher beam energies. As a result, previous authors have suggested using low energy photons (5 × 5 cm2) for lung cancer patients to avoid the negative dosimetric effects of LED. In this work, we propose a new form of SBRT, described as LED-optimized SBRT (LED-SBRT), which utilizes radiotherapy (RT) parameters designed to cause LED to advantage. It will be shown that LED-SBRT creates enhanced dose gradients at the tumour/lung interface, which can be used to manipulate tumour dose, and/or normal lung dose. To demonstrate the potential benefits of LED-SBRT, the DOSXYZnrc (National Research Council of Canada, Ottawa, ON) Monte Carlo (MC) software was used to calculate dose within a cylindrical phantom and a typical lung patient. 6 MV or 18 MV x-ray fields were focused onto a small tumour volume (diameter ˜1 cm). For the phantom, square fields of 1 × 1 cm2, 3 × 3 cm2, or 5 × 5 cm2 were applied. However, in the patient, 3 × 1 cm2, 3 × 2 cm2, 3 × 2.5 cm2, or 3 × 3 cm2 field sizes were used in simulations to assure target coverage in the superior-inferior direction. To mimic a 180° SBRT arc in the (symmetric) phantom, a single beam profile was calculated, rotated, and beams were summed at 1° segments to accumulate an arc dose distribution. For the patient, a 360° arc was modelled with 36 equally weighted (and spaced) fields focused on the tumour centre. A planning target volume (PTV) was generated by considering the

  16. Petri Nets-Applications

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 4; Issue 9. Petri Nets - Applications. Y Narahari. General Article Volume 4 Issue 9 September 1999 pp 44-52. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/004/09/0044-0052. Author Affiliations. Y Narahari ...

  17. Safety nets or straitjackets?

    DEFF Research Database (Denmark)

    Ilsøe, Anna

    2012-01-01

    Does regulation of working hours at national and sector level impose straitjackets, or offer safety nets to employees seeking working time flexibility? This article compares legislation and collective agreements in the metal industries of Denmark, Germany and the USA. The industry has historically...

  18. Coloured Petri Nets

    CERN Document Server

    Jensen, Kurt

    2009-01-01

    Coloured Petri Nets (CPN) is a graphical language for modelling and validating concurrent and distributed systems, and other systems in which concurrency plays a major role. This book introduces the constructs of the CPN modelling language and presents the related analysis methods. It provides a comprehensive road map for the practical use of CPN.

  19. Boom Booom Net Radio

    DEFF Research Database (Denmark)

    Grimshaw, Mark Nicholas; Yong, Louisa; Dobie, Ian

    1999-01-01

    of an existing Internet radio station; Boom Booom Net Radio. Whilst necessity dictates some use of technology-related terminology, wherever possible we have endeavoured to keep such jargon to a minimum and to either explain it in the text or to provide further explanation in the appended glossary....

  20. Game Theory .net.

    Science.gov (United States)

    Shor, Mikhael

    2003-01-01

    States making game theory relevant and accessible to students is challenging. Describes the primary goal of GameTheory.net is to provide interactive teaching tools. Indicates the site strives to unite educators from economics, political and computer science, and ecology by providing a repository of lecture notes and tests for courses using…

  1. Coloured Petri Nets

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kristensen, Lars Michael

    Coloured Petri Nets (CPN) is a graphical language for modelling and validating concurrent and distributed systems, and other systems in which concurrency plays a major role. The development of such systems is particularly challenging because of inherent intricacies like possible nondeterminism...

  2. In vivo recording of aerodynamic force with an aerodynamic force platform: from drones to birds.

    Science.gov (United States)

    Lentink, David; Haselsteiner, Andreas F; Ingersoll, Rivers

    2015-03-06

    Flapping wings enable flying animals and biomimetic robots to generate elevated aerodynamic forces. Measurements that demonstrate this capability are based on experiments with tethered robots and animals, and indirect force calculations based on measured kinematics or airflow during free flight. Remarkably, there exists no method to measure these forces directly during free flight. Such in vivo recordings in freely behaving animals are essential to better understand the precise aerodynamic function of their flapping wings, in particular during the downstroke versus upstroke. Here, we demonstrate a new aerodynamic force platform (AFP) for non-intrusive aerodynamic force measurement in freely flying animals and robots. The platform encloses the animal or object that generates fluid force with a physical control surface, which mechanically integrates the net aerodynamic force that is transferred to the earth. Using a straightforward analytical solution of the Navier-Stokes equation, we verified that the method is accurate. We subsequently validated the method with a quadcopter that is suspended in the AFP and generates unsteady thrust profiles. These independent measurements confirm that the AFP is indeed accurate. We demonstrate the effectiveness of the AFP by studying aerodynamic weight support of a freely flying bird in vivo. These measurements confirm earlier findings based on kinematics and flow measurements, which suggest that the avian downstroke, not the upstroke, is primarily responsible for body weight support during take-off and landing.

  3. Food Safety Nets:

    OpenAIRE

    Haggblade, Steven; Diallo, Boubacar; Staatz, John; Theriault, Veronique; Traoré, Abdramane

    2013-01-01

    Food and social safety nets have a history as long as human civilization. In hunter gatherer societies, food sharing is pervasive. Group members who prove unlucky in the short run, hunting or foraging, receive food from other households in anticipation of reciprocal consideration at a later time (Smith 1988). With the emergence of the first large sedentary civilizations in the Middle East, administrative systems developed specifically around food storage and distribution. The ancient Egyptian...

  4. Using WordNet for Building WordNets

    CERN Document Server

    Farreres, X; Farreres, Xavier; Rodriguez, Horacio; Rigau, German

    1998-01-01

    This paper summarises a set of methodologies and techniques for the fast construction of multilingual WordNets. The English WordNet is used in this approach as a backbone for Catalan and Spanish WordNets and as a lexical knowledge resource for several subtasks.

  5. Proof nets for lingusitic analysis

    NARCIS (Netherlands)

    Moot, R.C.A.

    2002-01-01

    This book investigates the possible linguistic applications of proof nets, redundancy free representations of proofs, which were introduced by Girard for linear logic. We will adapt the notion of proof net to allow the formulation of a proof net calculus which is soundand complete for the

  6. Teaching Tennis for Net Success.

    Science.gov (United States)

    Young, Bryce

    1989-01-01

    A program for teaching tennis to beginners, NET (Net Easy Teaching) is described. The program addresses three common needs shared by tennis students: active involvement in hitting the ball, clearing the net, and positive reinforcement. A sample lesson plan is included. (IAH)

  7. Net4Care Ecosystem Website

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Hansen, Klaus Marius; Rasmussen, Morten

    2012-01-01

    is a tele-monitoring scenario in which Net4Care clients are deployed in a gateway in private homes. Medical devices then connect to these gateways and transmit their observations to a Net4Care server. In turn the Net4Care server creates valid clinical HL7 documents, stores them in a national XDS repository...

  8. Comparing biofouling control treatments for use on aquaculture nets.

    Science.gov (United States)

    Swain, Geoffrey; Shinjo, Nagahiko

    2014-12-02

    Test panels comprised of uncoated, copper coated and silicone coated 7/8'' (22 mm) mesh knitted nylon net were evaluated to compare their properties and the effectiveness to prevent biofouling. This paper describes test procedures that were developed to quantify the performance in terms of antifouling, cleanability, drag and cost. The copper treatment was the most effective at controlling fouling, however, the silicone treated nets were the easiest to clean. The drag forces on the net were a function of twine diameter, twine roughness and fouling. After immersion, the uncoated nets had the most drag followed by the silicone and copper treatments. The cost of applying silicone to nets is high; however, improved formulations may provide a non-toxic alternative to control fouling.

  9. Comparing Biofouling Control Treatments for Use on Aquaculture Nets

    Directory of Open Access Journals (Sweden)

    Geoffrey Swain

    2014-12-01

    Full Text Available Test panels comprised of uncoated, copper coated and silicone coated 7/8'' (22 mm mesh knitted nylon net were evaluated to compare their properties and the effectiveness to prevent biofouling. This paper describes test procedures that were developed to quantify the performance in terms of antifouling, cleanability, drag and cost. The copper treatment was the most effective at controlling fouling, however, the silicone treated nets were the easiest to clean. The drag forces on the net were a function of twine diameter, twine roughness and fouling. After immersion, the uncoated nets had the most drag followed by the silicone and copper treatments. The cost of applying silicone to nets is high; however, improved formulations may provide a non-toxic alternative to control fouling.

  10. Art/Net/Work

    DEFF Research Database (Denmark)

    Andersen, Christian Ulrik; Lindstrøm, Hanne

    2006-01-01

    The seminar Art|Net|Work deals with two important changes in our culture. On one side, the network has become essential in the latest technological development. The Internet has entered a new phase, Web 2.0, including the occurrence of as ‘Wiki’s’, ‘Peer-2-Peer’ distribution, user controlled...... the praxis of the artist. We see different kinds of interventions and activism (including ‘hacktivism’) using the network as a way of questioning the invisible rules that govern public and semi-public spaces. Who ‘owns’ them? What kind of social relationships do they generate? On what principle...

  11. Investigations on the porous resistance coefficients for fishing net structures

    DEFF Research Database (Denmark)

    Chen, Hao; Christensen, Erik Damgaard

    2016-01-01

    resistance coefficients were adjusted by fitting the available experimental data. In the present paper, a new approach was proposed to calculate the porous resistance coefficients based on the transformation of Morison type load model. The transformation follows the principle that the total forces acting...... validation cases were carried out to examine the performance of the numerical model. This includes steady current flow through plane net panels and circular fish cages, and wave interaction with plane net panels. A variety of fishing nets with different solidity ratios were used in the validation cases, from...

  12. ``Force-free'' electrophoresis?

    Science.gov (United States)

    Yariv, Ehud

    2006-03-01

    When a colloidal particle is exposed to an externally applied electric field, it acquires an electrophoretic velocity, resulting from fluid slip occurring across the Debye screening layer. When the field is uniformly applied, it is usually assumed that the net neutrality of the combined particle-layer system implies that the net electric force acting on it must vanish. This assumption of "force-free" phoretic motion has been employed extensively to describe electrophoresis in both unbounded and bounded fluid domains [J. L. Anderson, Annu. Rev. Fluid Mech. 21, 61 (1989)]. A careful inspection reveals here that this intuitive premise may fail when the fluid domain is bounded, in which case a nonzero electric force (resembling dielectrophoretic forces in nonuniformly applied fields) may actually exist. Such forces (represented via surface integrals of Maxwell stresses) result in particle motion above and beyond the one driven by the phoretic slip mechanism. A positive demonstration for the existence of a such a force is provided for a standard sphere-wall configuration, where the applied field acts parallel to the wall. In that scenario, particle motion consists of a (familiar) slip-driven contribution parallel to the wall, together with a superimposed force-driven drift away from the wall. An analogy with pressure forces occurring at incompressible and inviscid potential flows is presented.

  13. Kinship alters the effects of forced cohabitation on body weight, mate choice and fitness in the rat-like hamster Tscheskia triton

    Directory of Open Access Journals (Sweden)

    Lin CONG

    2009-02-01

    Full Text Available It has been documented that social isolation imparts deleterious effects on gregarious rodents species, but caging in group imparts such effects on solitary rodents. This study was attempted at examining how kinship to affect body weight, behavioral interaction, mate choice and fitness when we caged male and female rat-like hamsters Tscheskia triton in pair, a solitary species. We found that females paired with nonsibling males became heavier than the females paired with sibling males, but both agonistic and amicable behavior between paired males and females did not differ between sibling and nonsibling groups. This indicated that kinship might reduce females’ obesity in response to forced cohabitation, and dissociation might exist between physiological and behavioral responses. Furthermore, binary choice tests revealed that social familiarity between either siblings or nonsiblings decreased their investigating time spent in opposite sex conspecific of cage mates and/or their scents as compared with those of non-mates, suggesting effects of social association on mate and kin selection of the hamsters. On the other side, both females and males caged in pair with siblings show a preference between unfamiliar siblings or their scents and the counterparts of nonsiblings after two month separation, indicating that the kin recognition of the hamsters might also rely on phenotype matching. In addition, cohabitation (or permanent presence of fathers elicited a lower survival of pups in nonsibling pairs than sibling pairs, but did not affect litter size, suggesting that kinship affects fitness when housing male and female ratlike hamsters together. Therefore, inbreeding might be adapted for rare and endangered animals [Current Zoology 55(1: 41–47, 2009].

  14. Helminth.net: expansions to Nematode.net and an introduction to Trematode.net

    Science.gov (United States)

    Martin, John; Rosa, Bruce A.; Ozersky, Philip; Hallsworth-Pepin, Kymberlie; Zhang, Xu; Bhonagiri-Palsikar, Veena; Tyagi, Rahul; Wang, Qi; Choi, Young-Jun; Gao, Xin; McNulty, Samantha N.; Brindley, Paul J.; Mitreva, Makedonka

    2015-01-01

    Helminth.net (http://www.helminth.net) is the new moniker for a collection of databases: Nematode.net and Trematode.net. Within this collection we provide services and resources for parasitic roundworms (nematodes) and flatworms (trematodes), collectively known as helminths. For over a decade we have provided resources for studying nematodes via our veteran site Nematode.net (http://nematode.net). In this article, (i) we provide an update on the expansions of Nematode.net that hosts omics data from 84 species and provides advanced search tools to the broad scientific community so that data can be mined in a useful and user-friendly manner and (ii) we introduce Trematode.net, a site dedicated to the dissemination of data from flukes, flatworm parasites of the class Trematoda, phylum Platyhelminthes. Trematode.net is an independent component of Helminth.net and currently hosts data from 16 species, with information ranging from genomic, functional genomic data, enzymatic pathway utilization to microbiome changes associated with helminth infections. The databases’ interface, with a sophisticated query engine as a backbone, is intended to allow users to search for multi-factorial combinations of species’ omics properties. This report describes updates to Nematode.net since its last description in NAR, 2012, and also introduces and presents its new sibling site, Trematode.net. PMID:25392426

  15. NETS FOR PEACH PROTECTED CULTIVATION

    Directory of Open Access Journals (Sweden)

    Evelia Schettini

    2012-06-01

    Full Text Available The aim of this paper was to investigate the radiometric properties of coloured nets used to protect a peach cultivation. The modifications of the solar spectral distribution, mainly in the R and FR wavelength band, influence plant photomorphogenesis by means of the phytochrome and cryptochrome. The phytochrome response is characterized in terms of radiation rate in the red wavelengths (R, 600-700 nm to that in the farred radiation (FR, 700-800 nm, i.e. the R/FR ratio. The effects of the blue radiation (B, 400-500 nm is investigated by the ratio between the blue radiation and the far-red radiation, i.e. the B/FR ratio. A BLUE net, a RED net, a YELLOW net, a PEARL net, a GREY net and a NEUTRAL net were tested in Bari (Italy, latitude 41° 05’ N. Peach trees were located in pots inside the greenhouses and in open field. The growth of the trees cultivated in open field was lower in comparison to the growth of the trees grown under the nets. The RED, PEARL, YELLOW and GREY nets increased the growth of the trees more than the other nets. The nets positively influenced the fruit characteristics, such as fruit weight and flesh firmness.

  16. A review of a method for dynamic load distribution, dynamic modeling, and explicit internal force control when two serial link manipulators mutually lift and transport a rigid body object

    Energy Technology Data Exchange (ETDEWEB)

    Unseren, M.A.

    1997-09-01

    The report reviews a method for modeling and controlling two serial link manipulators which mutually lift and transport a rigid body object in a three dimensional workspace. A new vector variable is introduced which parameterizes the internal contact force controlled degrees of freedom. A technique for dynamically distributing the payload between the manipulators is suggested which yields a family of solutions for the contact forces and torques the manipulators impart to the object. A set of rigid body kinematic constraints which restricts the values of the joint velocities of both manipulators is derived. A rigid body dynamical model for the closed chain system is first developed in the joint space. The model is obtained by generalizing the previous methods for deriving the model. The joint velocity and acceleration variables in the model are expressed in terms of independent pseudovariables. The pseudospace model is transformed to obtain reduced order equations of motion and a separate set of equations governing the internal components of the contact forces and torques. A theoretic control architecture is suggested which explicitly decouples the two sets of equations comprising the model. The controller enables the designer to develop independent, non-interacting control laws for the position control and internal force control of the system.

  17. The equivalency between logic Petri workflow nets and workflow nets.

    Science.gov (United States)

    Wang, Jing; Yu, ShuXia; Du, YuYue

    2015-01-01

    Logic Petri nets (LPNs) can describe and analyze batch processing functions and passing value indeterminacy in cooperative systems. Logic Petri workflow nets (LPWNs) are proposed based on LPNs in this paper. Process mining is regarded as an important bridge between modeling and analysis of data mining and business process. Workflow nets (WF-nets) are the extension to Petri nets (PNs), and have successfully been used to process mining. Some shortcomings cannot be avoided in process mining, such as duplicate tasks, invisible tasks, and the noise of logs. The online shop in electronic commerce in this paper is modeled to prove the equivalence between LPWNs and WF-nets, and advantages of LPWNs are presented.

  18. Coloured Petri Nets

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kristensen, Lars Michael

    studies that illustrate the practical use of CPN modelling and validation for design, specification, simulation, verification and implementation in various application domains. Their presentation primarily aims at readers interested in the practical use of CPN. Thus all concepts and constructs are first......Coloured Petri Nets (CPN) is a graphical language for modelling and validating concurrent and distributed systems, and other systems in which concurrency plays a major role. The development of such systems is particularly challenging because of inherent intricacies like possible nondeterminism...... and the immense number of possible execution sequences. In this textbook, Jensen and Kristensen introduce the constructs of the CPN modelling language and present the related analysis methods in detail. They also provide a comprehensive road map for the practical use of CPN by showcasing selected industrial case...

  19. Anti-gravity treadmills are effective in reducing knee forces.

    Science.gov (United States)

    Patil, Shantanu; Steklov, Nikolai; Bugbee, William D; Goldberg, Timothy; Colwell, Clifford W; D'Lima, Darryl D

    2013-05-01

    Lower body positive pressure (LBPP) treadmills permit significant unweighting of patients and have the potential to enhance recovery following lower limb surgery. We determined the efficacy of an LBPP treadmill in reducing knee forces in vivo. Subjects, implanted with custom electronic tibial prostheses to measure forces in the knee, were tested on a treadmill housed within a LBPP chamber. Tibiofemoral forces were monitored at treadmill speeds from 1.5 mph (0.67 m/s) to 4.5 mph (2.01 m/s), treadmill incline from -10° to +10°, and four treadmill chamber pressure settings adjusted to decrease net treadmill reaction force from 100% to 25% of the subject's body weight (BW). The peak axial tibiofemoral force ranged from 5.1 times BW at a treadmill speed of 4.5 mph (2.01 m/s) and a pressure setting of 100% BW to 0.8 times BW at 1.5 mph (0.67 m/s) and a pressure setting of 25% BW. Peak knee forces were significantly correlated with walking speed and treadmill reaction force (R(2)  = 0.77, p = 0.04). The LBPP treadmill might be an effective tool in the rehabilitation of patients following lower-extremity surgery. The strong correlation between tibiofemoral force and walking speed and treadmill reaction forces allows for more precisely achieving the target knee forces desired during early rehabilitation. Copyright © 2012 Orthopaedic Research Society.

  20. Truncated Conjugate Gradient: An Optimal Strategy for the Analytical Evaluation of the Many-Body Polarization Energy and Forces in Molecular Simulations.

    Science.gov (United States)

    Aviat, Félix; Levitt, Antoine; Stamm, Benjamin; Maday, Yvon; Ren, Pengyu; Ponder, Jay W; Lagardère, Louis; Piquemal, Jean-Philip

    2017-01-10

    We introduce a new class of methods, denoted as Truncated Conjugate Gradient(TCG), to solve the many-body polarization energy and its associated forces in molecular simulations (i.e. molecular dynamics (MD) and Monte Carlo). The method consists in a fixed number of Conjugate Gradient (CG) iterations. TCG approaches provide a scalable solution to the polarization problem at a user-chosen cost and a corresponding optimal accuracy. The optimality of the CG-method guarantees that the number of the required matrix-vector products are reduced to a minimum compared to other iterative methods. This family of methods is non-empirical, fully adaptive, and provides analytical gradients, avoiding therefore any energy drift in MD as compared to popular iterative solvers. Besides speed, one great advantage of this class of approximate methods is that their accuracy is systematically improvable. Indeed, as the CG-method is a Krylov subspace method, the associated error is monotonically reduced at each iteration. On top of that, two improvements can be proposed at virtually no cost: (i) the use of preconditioners can be employed, which leads to the Truncated Preconditioned Conjugate Gradient (TPCG); (ii) since the residual of the final step of the CG-method is available, one additional Picard fixed point iteration ("peek"), equivalent to one step of Jacobi Over Relaxation (JOR) with relaxation parameter ω, can be made at almost no cost. This method is denoted by TCG-n(ω). Black-box adaptive methods to find good choices of ω are provided and discussed. Results show that TPCG-3(ω) is converged to high accuracy (a few kcal/mol) for various types of systems including proteins and highly charged systems at the fixed cost of four matrix-vector products: three CG iterations plus the initial CG descent direction. Alternatively, T(P)CG-2(ω) provides robust results at a reduced cost (three matrix-vector products) and offers new perspectives for long polarizable MD as a production

  1. Confusion around the tidal force and the centrifugal force

    CERN Document Server

    Matsuda, Takuya; Boffin, Henri M J

    2015-01-01

    We discuss the tidal force, whose notion is sometimes misunderstood in the public domain literature. We discuss the tidal force exerted by a secondary point mass on an extended primary body such as the Earth. The tidal force arises because the gravitational force exerted on the extended body by the secondary mass is not uniform across the primary. In the derivation of the tidal force, the non-uniformity of the gravity is essential, and inertial forces such as the centrifugal force are not needed. Nevertheless, it is often asserted that the tidal force can be explained by the centrifugal force. If we literally take into account the centrifugal force, it would mislead us. We therefore also discuss the proper treatment of the centrifugal force.

  2. Estimating 3D L5/S1 moments and ground reaction forces during trunk bending using a full-body ambulatory inertial motion capture system

    NARCIS (Netherlands)

    Faber, G.S.; Chang, C.C.; Kingma, I.; Dennerlein, J.T.; van Dieen, J.H.

    2016-01-01

    Inertial motion capture (IMC) systems have become increasingly popular for ambulatory movement analysis. However, few studies have attempted to use these measurement techniques to estimate kinetic variables, such as joint moments and ground reaction forces (GRFs). Therefore, we investigated the

  3. Linear Logic on Petri Nets

    DEFF Research Database (Denmark)

    Engberg, Uffe Henrik; Winskel, Glynn

    This article shows how individual Petri nets form models of Girard's intuitionistic linear logic. It explores questions of expressiveness and completeness of linear logic with respect to this interpretation. An aim is to use Petri nets to give an understanding of linear logic and give some apprai...

  4. Reference Guide Microsoft.NET

    NARCIS (Netherlands)

    Zee M van der; Verspaij GJ; Rosbergen S; IMP; NMD

    2003-01-01

    Developers, administrators and managers can get more understanding of the .NET technology with this report. They can also make better choices how to use this technology. The report describes the results and conclusions of a study of the usability for the RIVM of this new generation .NET development

  5. Net neutrality and audiovisual services

    NARCIS (Netherlands)

    van Eijk, N.; Nikoltchev, S.

    2011-01-01

    Net neutrality is high on the European agenda. New regulations for the communication sector provide a legal framework for net neutrality and need to be implemented on both a European and a national level. The key element is not just about blocking or slowing down traffic across communication

  6. A Small Universal Petri Net

    Directory of Open Access Journals (Sweden)

    Dmitry A. Zaitsev

    2013-09-01

    Full Text Available A universal deterministic inhibitor Petri net with 14 places, 29 transitions and 138 arcs was constructed via simulation of Neary and Woods' weakly universal Turing machine with 2 states and 4 symbols; the total time complexity is exponential in the running time of their weak machine. To simulate the blank words of the weakly universal Turing machine, a couple of dedicated transitions insert their codes when reaching edges of the working zone. To complete a chain of a given Petri net encoding to be executed by the universal Petri net, a translation of a bi-tag system into a Turing machine was constructed. The constructed Petri net is universal in the standard sense; a weaker form of universality for Petri nets was not introduced in this work.

  7. Upper limb joint forces and moments during underwater cyclical movements.

    Science.gov (United States)

    Lauer, Jessy; Rouard, Annie Hélène; Vilas-Boas, João Paulo

    2016-10-03

    Sound inverse dynamics modeling is lacking in aquatic locomotion research because of the difficulty in measuring hydrodynamic forces in dynamic conditions. Here we report the successful implementation and validation of an innovative methodology crossing new computational fluid dynamics and inverse dynamics techniques to quantify upper limb joint forces and moments while moving in water. Upper limb kinematics of seven male swimmers sculling while ballasted with 4kg was recorded through underwater motion capture. Together with body scans, segment inertial properties, and hydrodynamic resistances computed from a unique dynamic mesh algorithm capable to handle large body deformations, these data were fed into an inverse dynamics model to solve for joint kinetics. Simulation validity was assessed by comparing the impulse produced by the arms, calculated by integrating vertical forces over a stroke period, to the net theoretical impulse of buoyancy and ballast forces. A resulting gap of 1.2±3.5% provided confidence in the results. Upper limb joint load was within 5% of swimmer׳s body weight, which tends to supports the use of low-load aquatic exercises to reduce joint stress. We expect this significant methodological improvement to pave the way towards deeper insights into the mechanics of aquatic movement and the establishment of practice guidelines in rehabilitation, fitness or swimming performance. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Casting a larger net

    DEFF Research Database (Denmark)

    Hansen, Morten Balle; Villadsen, Anders Ryom

    2013-01-01

    Managerial networking is an important part of public management. Research has forcefully demonstrated how this aspect of management directly and indirectly is related to organizational outcomes. Much less is known, however, about the determinants of managerial networking. This is especially true......-tier managers in Danish municipalities. Results suggest that managers engage in two different types of external networking, and that the amount of networking behavior is determined in a complex interplay of the three sets of explanatory factors. Contributions to existing research are discussed....... with regards to individual-level explanations. This paper addresses this important gap and proposes a composite model of managerial networking as formed by three sets of factors: personal, job-related, and organizational. On this background a set of hypotheses are developed and tested in a study of top...

  9. The Mechanical Strength of Acrylic Palatal Plates Reinforced with Net or Bundle Glass Fibers

    OpenAIRE

    Hedzelek, W.; Gajdus, P.; Joniak, S.

    2002-01-01

    The aim of the study was to evaluate the resistant forces of acrylic palatal plates reinforced with glass net and unidirectional glass fibers. The form and models of the edentulous jaw (Frasaco) were used in the study. Palatal plates were made from hot polymerised acrylic SR Triplex Hot (Ivoclar). In the total reinforced method the studied palatal plates used were reinforced with one or three layers of fiber glass net (Stick Net). In the partial reinforced method acrylic palatal plates wer...

  10. High-level Petri Nets

    DEFF Research Database (Denmark)

    High-level Petri nets are now widely used in both theoretical analysis and practical modelling of concurrent systems. The main reason for the success of this class of net models is that they make it possible to obtain much more succinct and manageable descriptions than can be obtained by means...... of low-level Petri nets - while, on the other hand, they still offer a wide range of analysis methods and tools. The step from low-level nets to high-level nets can be compared to the step from assembly languages to modern programming languages with an elaborated type concept. In low-level nets...... there is only one kind of token and this means that the state of a place is described by an integer (and in many cases even by a boolean). In high-level nets each token can carry a complex information/data - which, e.g., may describe the entire state of a process or a data base. Today most practical...

  11. Pro asynchronous programming with .NET

    CERN Document Server

    Blewett, Richard; Ltd, Rock Solid Knowledge

    2014-01-01

    Pro Asynchronous Programming with .NET teaches the essential skill of asynchronous programming in .NET. It answers critical questions in .NET application development, such as: how do I keep my program responding at all times to keep my users happy how do I make the most of the available hardware how can I improve performanceIn the modern world, users expect more and more from their applications and devices, and multi-core hardware has the potential to provide it. But it takes carefully crafted code to turn that potential into responsive, scalable applications.With Pro Asynchronous Programming

  12. Conformal Nets II: Conformal Blocks

    Science.gov (United States)

    Bartels, Arthur; Douglas, Christopher L.; Henriques, André

    2017-08-01

    Conformal nets provide a mathematical formalism for conformal field theory. Associated to a conformal net with finite index, we give a construction of the `bundle of conformal blocks', a representation of the mapping class groupoid of closed topological surfaces into the category of finite-dimensional projective Hilbert spaces. We also construct infinite-dimensional spaces of conformal blocks for topological surfaces with smooth boundary. We prove that the conformal blocks satisfy a factorization formula for gluing surfaces along circles, and an analogous formula for gluing surfaces along intervals. We use this interval factorization property to give a new proof of the modularity of the category of representations of a conformal net.

  13. Radiative forcing by contrails

    Directory of Open Access Journals (Sweden)

    R. Meerkötter

    1999-08-01

    Full Text Available A parametric study of the instantaneous radiative impact of contrails is presented using three different radiative transfer models for a series of model atmospheres and cloud parameters. Contrails are treated as geometrically and optically thin plane parallel homogeneous cirrus layers in a static atmosphere. The ice water content is varied as a function of ambient temperature. The model atmospheres include tropical, mid-latitude, and subarctic summer and winter atmospheres. Optically thin contrails cause a positive net forcing at top of the atmosphere. At the surface the radiative forcing is negative during daytime. The forcing increases with the optical depth and the amount of contrail cover. At the top of the atmosphere, a mean contrail cover of 0.1% with average optical depth of 0.2 to 0.5 causes about 0.01 to 0.03 Wm-2 daily mean instantaneous radiative forcing. Contrails cool the surface during the day and heat the surface during the night, and hence reduce the daily temperature amplitude. The net effect depends strongly on the daily variation of contrail cloud cover. The indirect radiative forcing due to particle changes in natural cirrus clouds may be of the same magnitude as the direct one due to additional cover.Key words. Atmospheric composition and structure (aerosols and particles · Meteorology and atmospheric dynamics (climatology · radiative processes

  14. Radiative forcing by contrails

    Directory of Open Access Journals (Sweden)

    R. Meerkötter

    Full Text Available A parametric study of the instantaneous radiative impact of contrails is presented using three different radiative transfer models for a series of model atmospheres and cloud parameters. Contrails are treated as geometrically and optically thin plane parallel homogeneous cirrus layers in a static atmosphere. The ice water content is varied as a function of ambient temperature. The model atmospheres include tropical, mid-latitude, and subarctic summer and winter atmospheres. Optically thin contrails cause a positive net forcing at top of the atmosphere. At the surface the radiative forcing is negative during daytime. The forcing increases with the optical depth and the amount of contrail cover. At the top of the atmosphere, a mean contrail cover of 0.1% with average optical depth of 0.2 to 0.5 causes about 0.01 to 0.03 Wm-2 daily mean instantaneous radiative forcing. Contrails cool the surface during the day and heat the surface during the night, and hence reduce the daily temperature amplitude. The net effect depends strongly on the daily variation of contrail cloud cover. The indirect radiative forcing due to particle changes in natural cirrus clouds may be of the same magnitude as the direct one due to additional cover.

    Key words. Atmospheric composition and structure (aerosols and particles · Meteorology and atmospheric dynamics (climatology · radiative processes

  15. Radiative forcing by contrails

    Energy Technology Data Exchange (ETDEWEB)

    Meerkoetter, R.; Schumann, U. [DLR Oberpfaffenhofen, Wessling (Germany). Inst. fuer Phys. der Atmosphaere; Doelling, D.R.; Minnis, P. [National Aeronautics and Space Administration, Hampton, VA (United States). Langley Research Center; Nakajima, T.; Tsushima, Y. [Tokyo Univ. (Japan). Center for Climate System Research

    1999-08-01

    A parametric study of the instantaneous radiative impact of contrails is presented using three different radiative transfer models for a series of model atmospheres and cloud parameters. Contrails are treated as geometrically and optically thin plane parallel homogeneous cirrus layers in a static atmosphere. The ice water content is varied as a function of ambient temperature. The model atmospheres include tropical, midlatitude, and subarctic summer and winter atmospheres. Optically thin contrails cause a positive net forcing at top of the atmosphere. At the surface the radiative forcing is negative during daytime. The forcing increases with the optical depth and the amount of contrail cover. At the top of the atmosphere, a mean contrail cover of 0.1% with average optical depth of 0.2 to 0.5 causes about 0.01 to 0.03 Wm{sup -2} daily mean instantaneous radiative forcing. Contrails cool the surface during the day and heat the surface during the night, and hence reduce the daily temperature amplitude. The net effect depends strongly on the daily variation of contrail cloud cover. The indirect radiative forcing due to particle changes in natural cirrus clouds may be of the same magnitude as the direct one due to additional cover. (orig.) 78 refs.

  16. The composition of a graph on the decline of total body strength with age based on pushing, pulling, twisting and gripping force

    NARCIS (Netherlands)

    Voorbij, A.I.M.; Steenbekkers, L.P.A.

    2001-01-01

    This study is part of a large project on design-relevant characteristics of ageing users. A total of 750 young and elderly, male and female subjects were tested. All subjects were able to live independently. Differences between the sexes were mapped as well as changes in force with age. The

  17. Wasp-inspired needle insertion with low net push force

    NARCIS (Netherlands)

    Sprang, T.; Breedveld, P.; Dodou, D.; Lepora, N.F.; Mura, A.; Mangan, M.; Verschure, P.F.M.J.; Desmulliez, M.; Prescott, T.J.

    2016-01-01

    This paper outlines the development of a four-part needle prototype inspired by the ovipositor of parasitic wasps. In the wasp ovipositor, three longitudinal segments called valves move reciprocally to gain depth in the substrate. It has been suggested that serrations located along the wasp

  18. Body composition and net requirements of protein and energy for weight gain of Nellore and crossbreed steers finished under grazing Composição corporal e exigências líquidas de proteína e energia para ganho de peso de novilhos nelores e mestiços terminados a pasto

    Directory of Open Access Journals (Sweden)

    N.F. Sant´Ana

    2011-04-01

    Full Text Available The objective of this work was to evaluate body composition and net requirements of protein and energy for weight gain of Nellore and crossbred F1 Limousin-Nellore steers finished on Mombasa grass pastures. Mombasa grass (Panicum maximum pastures were managed under intermitent stocking during the rainy season, with a forage offer of 8% of the body weight (BW based on the dry matter of green leaves. Twenty-four steers were used: 12 were Nellore (386 kg SBW and 12 were F1 Limousin-Nellore (397 kg SBW. Changes in body composition in a 104-day experimental period were evaluated according to the comparative slaughter method. After slaughter, all body components were weighed and representative samples of carcass (HH section and non-carcass tissues were collected, processed and chemically analyzed to determine body contents of protein, fat and energy in each animal. Linearized allometric equations were fitted to describe the pattern of growth of body components as a function of empty body weight of the animals. The obtained equations were derived to predict net requirements of protein and energy for weight gain. There were no differences between Nellore and crossbreed steers regarding to protein deposition. Nellore animals tended to a greater deposition of energy on weight compared to crossbred animals. It is possible to obtain well finished carcass in Nellore and crossbred steers with a greater weight on tropical pastures with an adequate supply of leaves.Este trabalho foi conduzido com o objetivo de avaliar a composição corporal e as exigências líquidas de proteína e energia para ganho de peso de novilhos Nelore e mestiços ½Limousin-Nelore terminados em pastagem de capim-mombaça. A pastagem de capim-mombaça (Panicum maximum foi manejada em regime de lotação intermitente durante a época chuvosa, com oferta de forragem de 8% do peso corporal (PC, com base na matéria seca de folhas verdes. Foram utilizados 24 novilhos: 12 da raça Nelore

  19. Waterscape determinants of net mercury methylation in a tropical wetland.

    Science.gov (United States)

    Lázaro, Wilkinson L; Díez, Sergi; da Silva, Carolina J; Ignácio, Áurea R A; Guimarães, Jean R D

    2016-10-01

    The periphyton associated with freshwater macrophyte roots is the main site of Hg methylation in different wetland environments in the world. The aim of this study was to test the use of connectivity metrics of water bodies, in the context of patches, in a tropical waterscape wetland (Guapore River, Amazonia, Brazil) as a predictor of potential net methylmercury (MeHg) production by periphyton communities. We sampled 15 lakes with different patterns of lateral connectivity with the main river channel, performing net mercury methylation potential tests in incubations with local water and Eichhornia crassipes root-periphyton samples, using (203)HgCl2 as a tracer. Physico-chemical variables, landscape data (morphological characteristics, land use, and lateral connection type of water bodies) using GIS resources and field data were analyzed with Generalized Additive Models (GAM). The net Me(203)Hg production (as % of total added (203)Hg) was expressive (6.2-25.6%) showing that periphyton is an important matrix in MeHg production. The model that best explained the variation in the net Me(203)Hg production (76%) was built by the variables: connection type, total phosphorus and dissolved organic carbon (DOC) in water (AICc=48.324, p=0.001). Connection type factor was the best factor to model fit (r(2)=0.32; p=0.008) and temporarily connected lakes had higher rates of net mercury methylation. Both DOC and total phosphorus showed positive significant covariation with the net methylation rates (r(2)=0.26; p=0.008 and r(2)=0.21; p=0.012 respectively). Our study suggests a strong relationship between rates of net MeHg production in this tropical area and the type of water body and its hydrological connectivity within the waterscape. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. Petri Net Tool Overview 1986

    DEFF Research Database (Denmark)

    Jensen, Kurt; Feldbrugge, Frits

    1987-01-01

    This paper provides an overview of the characteristics of all currently available net based tools. It is a compilation of information provided by tool authors or contact persons. A concise one page overview is provided as well....

  1. Understanding Net Zero Energy Buildings

    DEFF Research Database (Denmark)

    Salom, Jaume; Widén, Joakim; Candanedo, José

    2011-01-01

    Although several alternative definitions exist, a Net-Zero Energy Building (Net ZEB) can be succinctly described as a grid-connected building that generates as much energy as it uses over a year. The “net-zero” balance is attained by applying energy conservation and efficiency measures...... and by incorporating renewable energy systems. While based on annual balances, a complete description of a Net ZEB requires examining the system at smaller time-scales. This assessment should address: (a) the relationship between power generation and building loads and (b) the resulting interaction with the power grid....... This paper presents and categorizes quantitative indicators suitable to describe both aspects of the building’s performance. These indicators, named LMGI - Load Matching and Grid Interaction indicators, are easily quantifiable and could complement the output variables of existing building simulation tools...

  2. PolicyNet Publication System

    Data.gov (United States)

    Social Security Administration — The PolicyNet Publication System project will merge the Oracle-based Policy Repository (POMS) and the SQL-Server CAMP system (MSOM) into a new system with an Oracle...

  3. KM3NeT

    CERN Multimedia

    KM3NeT is a large scale next-generation neutrino telescope located in the deep waters of the Mediterranean Sea, optimized for the discovery of galactic neutrino sources emitting in the TeV energy region.

  4. Net Neutrality: Background and Issues

    National Research Council Canada - National Science Library

    Gilroy, Angele A

    2006-01-01

    .... The move to place restrictions on the owners of the networks that compose and provide access to the Internet, to ensure equal access and nondiscriminatory treatment, is referred to as "net neutrality...

  5. Petri Nets in Cryptographic Protocols

    DEFF Research Database (Denmark)

    Crazzolara, Federico; Winskel, Glynn

    2001-01-01

    A process language for security protocols is presented together with a semantics in terms of sets of events. The denotation of process is a set of events, and as each event specifies a set of pre and postconditions, this denotation can be viewed as a Petri net. By means of an example we illustrate...... how the Petri-net semantics can be used to prove security properties....

  6. The Economics of Net Neutrality

    OpenAIRE

    Hahn, Robert W.; Wallsten, Scott

    2006-01-01

    This essay examines the economics of "net neutrality" and broadband Internet access. We argue that mandating net neutrality would be likely to reduce economic welfare. Instead, the government should focus on creating competition in the broadband market by liberalizing more spectrum and reducing entry barriers created by certain local regulations. In cases where a broadband provider can exercise market power the government should use its antitrust enforcement authority to police anticompetitiv...

  7. New Isomers in the Full Seniority Scheme of Neutron-Rich Lead Isotopes: The Role of Effective Three-Body Forces

    Science.gov (United States)

    Gottardo, A.; Valiente-Dobón, J. J.; Benzoni, G.; Nicolini, R.; Gadea, A.; Lunardi, S.; Boutachkov, P.; Bruce, A. M.; Górska, M.; Grebosz, J.; Pietri, S.; Podolyák, Zs.; Pfützner, M.; Regan, P. H.; Weick, H.; Alcántara Núñez, J.; Algora, A.; Al-Dahan, N.; de Angelis, G.; Ayyad, Y.; Alkhomashi, N.; Allegro, P. R. P.; Bazzacco, D.; Benlliure, J.; Bowry, M.; Bracco, A.; Bunce, M.; Camera, F.; Casarejos, E.; Cortes, M. L.; Crespi, F. C. L.; Corsi, A.; Denis Bacelar, A. M.; Deo, A. Y.; Domingo-Pardo, C.; Doncel, M.; Dombradi, Zs.; Engert, T.; Eppinger, K.; Farrelly, G. F.; Farinon, F.; Farnea, E.; Geissel, H.; Gerl, J.; Goel, N.; Gregor, E.; Habermann, T.; Hoischen, R.; Janik, R.; Klupp, S.; Kojouharov, I.; Kurz, N.; Lenzi, S. M.; Leoni, S.; Mandal, S.; Menegazzo, R.; Mengoni, D.; Million, B.; Morales, A. I.; Napoli, D. R.; Naqvi, F.; Nociforo, C.; Prochazka, A.; Prokopowicz, W.; Recchia, F.; Ribas, R. V.; Reed, M. W.; Rudolph, D.; Sahin, E.; Schaffner, H.; Sharma, A.; Sitar, B.; Siwal, D.; Steiger, K.; Strmen, P.; Swan, T. P. D.; Szarka, I.; Ur, C. A.; Walker, P. M.; Wieland, O.; Wollersheim, H.-J.; Nowacki, F.; Maglione, E.; Zuker, A. P.

    2012-10-01

    The neutron-rich lead isotopes, up to Pb216, have been studied for the first time, exploiting the fragmentation of a primary uranium beam at the FRS-RISING setup at GSI. The observed isomeric states exhibit electromagnetic transition strengths which deviate from state-of-the-art shell-model calculations. It is shown that their complete description demands the introduction of effective three-body interactions and two-body transition operators in the conventional neutron valence space beyond Pb208.

  8. Gravitational self-force and the effective-one-body formalism between the innermost stable circular orbit and the light ring

    CERN Document Server

    Akcay, Sarp; Damour, Thibault; Sago, Norichika

    2012-01-01

    We compute the conservative piece of the gravitational self-force (GSF) acting on a particle of mass $m_1$ as it moves along an (unstable) circular geodesic orbit between the innermost stable circular orbit (ISCO) and the light ring of a Schwarzschild black hole of mass $m_2\\gg m_1$. More precisely, we construct the function $h_{uu}(x) \\equiv h_{\\mu\

  9. Composição corporal e exigências de energia de mantença em bovinos Nelore, puros mestiços, em confinamento Body composition and net energy requirements for maintenance of feedlot purebred and crossbred Nellore young bulls

    Directory of Open Access Journals (Sweden)

    José Antônio de Freitas

    2006-06-01

    Full Text Available Objetivou-se estimar a composição corporal de gordura e proteína e as exigências de energia de mantença em bovinos Nelore puros e mestiços. Foram utilizados 72 bovinos machos (18 Nelore, 18 F1 Nelore x Angus, 18 F1 Nelore x Pardo- Suíço e 18 F1 Nelore x Simental não-castrados, com 10 a 11 meses de idade e peso médio inicial de 286, 309, 333 e 310 kg, respectivamente. O delineamento utilizado foi o inteiramente casualizado, com quatro grupos genéticos, submetidos a quatro níveis de concentrado na ração (30, 40, 60 e 70%. No início do experimento, três animais de cada grupo genético foram alocados no grupo de alimentação restrita e três foram abatidos no grupo de abate inicial. As exigências líquidas de energia para mantença (ELm foram obtidas pela regressão da produção de calor (kcal/kg0,75/dia em função do consumo de energia metabolizável (CEM - Mcal/kg0,75/dia, extrapolando-se para o nível zero de ingestão de EM. Não houve diferenças nas exigências de energia líquida de mantença (ELm entre os grupos genéticos. Verificou-se elevação de 260,2; 92,6 e 67,8% nos conteúdos corporais de gordura e proteína e na concentração de gordura (g/kg de peso corporal vazio - PCV, com elevação de 250 para 550 kg no peso vivo, ao passo que a concentração de proteína corporal reduziu em 10,9%. O teste de identidade de modelos não-lineares indicou não haver diferenças entre os grupos genéticos para a composição corporal de gordura, proteína e energia e nas ELm. Desse modo, o valor da ELm foi estimado em 79 kcal/kg0,75/dia.The objectives of this trial were to estimate the body composition of fat and protein and the net energy requirements for maintenance of purebred and crossbred Nellore. Seventy-two young bulls averaging 10 to 11 months of age from four genetic groups were used: 18 Nellore, 18 F1 Nellore x Angus, 18 F1 Nellore x Brown Swiss and 18 F1 Nellore x Simental with initial average weights of 286, 309

  10. Casting CurriculumNet wider | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2011-02-02

    Feb 2, 2011 ... The project expanded through a pilot computer network to six rural schools in districts surrounding the hub at NCDC in Kampala. Eventually CurriculumNet will achieve wider use throughout Uganda. As part of the project, representatives from Ugandan educational bodies did participatory assessments to ...

  11. 26 CFR 1.904(f)-3 - Allocation of net operating losses and net capital losses.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 9 2010-04-01 2010-04-01 false Allocation of net operating losses and net....904(f)-3 Allocation of net operating losses and net capital losses. For rules relating to the allocation of net operating losses and net capital losses, see § 1.904(g)-3T. ...

  12. 29 CFR 4204.13 - Net income and net tangible assets tests.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Net income and net tangible assets tests. 4204.13 Section....13 Net income and net tangible assets tests. (a) General. The criteria under this section are that either— (1) Net income test. The purchaser's average net income after taxes for its three most recent...

  13. Coriolis Force

    Science.gov (United States)

    Marciuc, Daly; Solschi, Viorel

    2017-04-01

    Understanding the Coriolis effect is essential for explaining the movement of air masses and ocean currents. The lesson we propose aims to familiarize students with the manifestation of the Coriolis effect. Students are guided to build, using the GeoGebra software, a simulation of the motion of a body, related to a rotating reference system. The mathematical expression of the Coriolis force is deduced, for particular cases, and the Foucault's pendulum is presented and explained. Students have the opportunity to deepen the subject, by developing materials related to topics such as: • Global Wind Pattern • Ocean Currents • Coriolis Effect in Long Range Shooting • Finding the latitude with a Foucault Pendulum

  14. The error of L5/S1 joint moment calculation in a body-centered non-inertial reference frame when the fictitious force is ignored

    NARCIS (Netherlands)

    Xu, X.; Faber, G.S.; Kingma, I.; Chang, C.C.; Hsiang, S.M.

    2013-01-01

    In ergonomics studies, linked segment models are commonly used for estimating dynamic L5/S1 joint moments during lifting tasks. The kinematics data input to these models are with respect to an arbitrary stationary reference frame. However, a body-centered reference frame, which is defined using the

  15. Composição corporal e exigências líquidas e dietéticas de macroelementos minerais de bovinos F1 Limousin x Nelore não-castrados Body composition and net and dietary macrominerals requirements of F1 Limousin x Nellore bulls

    Directory of Open Access Journals (Sweden)

    Cristina Mattos Veloso

    2002-06-01

    and Mg contents in the body were determined as function of their concentrations in the several parts of the body. Macrominerals contents retained in the body were determined by regression equations of the logarithm of macrominerals contents in the body as function of the logarithm of empty body weight (EBW. By deriving the prediction equations of macrominerals body content as function of the logarithm of EBW, it was obtained the net macrominerals requirements, for gains of 1 kg EBW, through the equation Y' = b. 10ª. Xb-1, being "a" and "b" intercept and the regression coefficient, respectively, of the prediction equations of macrominerals contents in the body. There was a decrease in the empty body and in the gain of empty body concentrations for all macrominerals studied, with live weight increase. The relationship g Ca/100 g of retained protein and g P/100 g of retained protein were 8.70 and 3.46, respectively.

  16. Force generation by titin folding.

    Science.gov (United States)

    Mártonfalvi, Zsolt; Bianco, Pasquale; Naftz, Katalin; Ferenczy, György G; Kellermayer, Miklós

    2017-07-01

    Titin is a giant protein that provides elasticity to muscle. As the sarcomere is stretched, titin extends hierarchically according to the mechanics of its segments. Whether titin's globular domains unfold during this process and how such unfolded domains might contribute to muscle contractility are strongly debated. To explore the force-dependent folding mechanisms, here we manipulated skeletal-muscle titin molecules with high-resolution optical tweezers. In force-clamp mode, after quenching the force (force trace contained rapid fluctuations and a gradual increase of average force, indicating that titin can develop force via dynamic transitions between its structural states en route to the native conformation. In 4 M urea, which destabilizes H-bonds hence the consolidated native domain structure, the net force increase disappeared but the fluctuations persisted. Thus, whereas net force generation is caused by the ensemble folding of the elastically-coupled domains, force fluctuations arise due to a dynamic equilibrium between unfolded and molten-globule states. Monte-Carlo simulations incorporating a compact molten-globule intermediate in the folding landscape recovered all features of our nanomechanics results. The ensemble molten-globule dynamics delivers significant added contractility that may assist sarcomere mechanics, and it may reduce the dissipative energy loss associated with titin unfolding/refolding during muscle contraction/relaxation cycles. © 2017 The Protein Society.

  17. Elucidating the Role of Many-Body Forces in Liquid Water. I. Simulations of Water Clusters on the VRT (ASP-W) Potential Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Goldman, N; Saykally, R J

    2003-10-03

    We test the new VRT(ASP-W)II and VRT(ASP-W)III potentials by employing Diffusion Quantum Monte Carlo simulations to calculate the vibrational ground-state properties of water clusters. These potentials are fits of the highly detailed ASP-W ab initio potential to (D{sub 2}O){sub 2} microwave and far-IR data, and along with the SAPT5s potentials, are the most accurate water dimer potential surfaces in the literature. The results from VRT(ASP-W)II and III are compare to those from the original ASP-W potential, the SAPT5s family of potentials, and several bulk water potentials. Only VRT(ASP-W)II and the spectroscopically ''tuned'' SAPT5st (with N-body induction included) accurately reproduce the vibrational ground-state structures of water clusters up to the hexamer. Finally, the importance of many-body induction and three-body dispension are examined, and it is shown that the latter can have significant effects on water cluster properties despite its small magnitude.

  18. The Impact of Force Transmission on Narrow-Body Dental Implants Made of Commercially Pure Titanium and Titanium Zirconia Alloy with a Conical Implant-Abutment Connection: An Experimental Pilot Study.

    Science.gov (United States)

    Nelson, Katja; Schmelzeisen, Rainer; Taylor, Thomas D; Zabler, Simon; Wiest, Wolfram; Fretwurst, Tobias

    2016-01-01

    The purpose of this study was to visualize the mode and impact of force transmission in narrowdiameter implants with different implant-abutment designs and material properties and to quantify the displacement of the abutment. Narrow-diameter implants from two manufacturers were examined: Astra 3.0-mm-diameter implants (Astra OsseoSpeed TX; n = 2) and Straumann Bone Level implants with a 3.3-mm diameter made of commercially pure titanium (cpTi) Gr. 4 (n = 2) and 3.3-mm TiZr-alloy (n = 2; Bone Level, Straumann) under incremental force application using synchrotron radiography (absorption and inline x-ray phase-contrast) and tomography. During loading (250 N), Astra 3.0 and Bone Level 3.3- mm implants showed a deformation of the outer implant shoulder of 61.75 to 95 μm independent of the implant body material; the inner implant diameter showed a deformation of 71.25 to 109.25 μm. A deformation of the implant shoulder persisted after the removal of the load (range, 42.75 to 104.5 μm). An angulated intrusion of the abutment (maximum, 140 μm) into the implant body during load application was demonstrated; this spatial displacement persisted after removal of the load. This study demonstrated a deformation of the implant shoulder and displacement of the abutment during load application in narrow-diameter implants.

  19. Pathophysiology of Gastric NETs: Role of Gastrin and Menin.

    Science.gov (United States)

    Sundaresan, Sinju; Kang, Anthony J; Merchant, Juanita L

    2017-07-01

    Neuroendocrine tumors (NETs) were initially identified as a separate entity in the early 1900s as a unique malignancy that secretes bioactive amines. GI-NETs are the most frequent type and represent a unique subset of NETs, because at least 75% of these tumors represent gastrin stimulation of the enterochromaffin-like cell located in the body of the stomach. The purpose of this review is to understand the specific role of gastrin in the generation of Gastric NETs (G-NETs). We review here the origin of enterochromaffin cells gut and the role of hypergastrinemia in gastric enteroendocrine tumorigenesis. We describe generation of the first genetically engineered mouse model of gastrin-driven G-NETs that mimics the human phenotype. The common mechanism observed in both the hypergastrinemic mouse model and human carcinoids is translocation of the cyclin-dependent inhibitor p27kip to the cytoplasm and its subsequent degradation by the proteasome. Therapies that block degradation of p27kip, the CCKBR2 gastrin receptor, or gastrin peptide are likely to facilitate treatment.

  20. The Air Force Handbook 2007

    Science.gov (United States)

    2007-01-01

    Hughes Space (CO); Boeing (FL); Contraves (PA); TRAK Microwave (FL); RT Logic (CO); ADC (MN); ENSCO (FL); Net Acquire (WA); Freescale ...ContrACtor THE AIR FORCE HANDBOOK 2007 Ford Aerospace AIM-9M Sidewinder Freescale Semiconductor Inc Launch & Test Range System (LTRS) GDE

  1. TimeNET Optimization Environment

    Directory of Open Access Journals (Sweden)

    Christoph Bodenstein

    2015-12-01

    Full Text Available In this paper a novel tool for simulation-based optimization and design-space exploration of Stochastic Colored Petri nets (SCPN is introduced. The working title of this tool is TimeNET Optimization Environment (TOE. Targeted users of this tool are people modeling complex systems with SCPNs in TimeNET who want to find parameter sets that are optimal for a certain performance measure (fitness function. It allows users to create and simulate sets of SCPNs and to run different optimization algorithms based on parameter variation. The development of this tool was motivated by the need to automate and speed up tests of heuristic optimization algorithms to be applied for SCPN optimization. A result caching mechanism is used to avoid recalculations.

  2. Implementing NetScaler VPX

    CERN Document Server

    Sandbu, Marius

    2014-01-01

    An easy-to-follow guide with detailed step-by step-instructions on how to implement the different key components in NetScaler, with real-world examples and sample scenarios.If you are a Citrix or network administrator who needs to implement NetScaler in your virtual environment to gain an insight on its functionality, this book is ideal for you. A basic understanding of networking and familiarity with some of the different Citrix products such as XenApp or XenDesktop is a prerequisite.

  3. Net4Care PHMR Library

    DEFF Research Database (Denmark)

    2014-01-01

    The Net4Care PHMR library contains a) A GreenCDA approach for constructing a data object representing a PHMR document: SimpleClinicalDocument, and b) A Builder which can produce a XML document representing a valid Danish PHMR (following the MedCom profile) document from the SimpleClinicalDocument......The Net4Care PHMR library contains a) A GreenCDA approach for constructing a data object representing a PHMR document: SimpleClinicalDocument, and b) A Builder which can produce a XML document representing a valid Danish PHMR (following the MedCom profile) document from the Simple...

  4. Pro DLR in NET 4

    CERN Document Server

    Wu, Chaur

    2011-01-01

    Microsoft's Dynamic Language Runtime (DLR) is a platform for running dynamic languages such as Ruby and Python on an equal footing with compiled languages such as C#. Furthermore, the runtime is the foundation for many useful software design and architecture techniques you can apply as you develop your .NET applications. Pro DLR in .NET 4 introduces you to the DLR, showing how you can use it to write software that combines dynamic and static languages, letting you choose the right tool for the job. You will learn the core DLR components such as LINQ expressions, call sites, binders, and dynami

  5. Hierarchies in Coloured Petri Nets

    DEFF Research Database (Denmark)

    Huber, Peter; Jensen, Kurt; Shapiro, Robert M.

    1991-01-01

    The paper shows how to extend Coloured Petri Nets with a hierarchy concept. The paper proposes five different hierarchy constructs, which allow the analyst to structure large CP-nets as a set of interrelated subnets (called pages). The paper discusses the properties of the proposed hierarchy...... constructs, and it illustrates them by means of two examples. The hierarchy constructs can be used for theoretical considerations, but their main use is to describe and analyse large real-world systems. All of the hierarchy constructs are supported by the editing and analysis facilities in the CPN Palette...

  6. An Application of CFD to Guide Forced Boundary-Layer Transition for Low-Speed Tests of a Hybrid Wing-Body Configuration

    Science.gov (United States)

    Luckring, James M.; Deere, Karen A.; Childs, Robert E.; Stremel, Paul M.; Long, Kurtis R.

    2016-01-01

    A hybrid transition trip-dot sizing and placement test technique was developed in support of recent experimental research on a hybrid wing-body configuration under study for the NASA Environmentally Responsible Aviation project. The approach combines traditional methods with Computational Fluid Dynamics. The application had three-dimensional boundary layers that were simulated with either fully turbulent or transitional flow models using established Reynolds-Averaged Navier-Stokes methods. Trip strip effectiveness was verified experimentally using infrared thermography during a low-speed wind tunnel test. Although the work was performed on one specific configuration, the process was based on fundamental flow physics and could be applicable to other configurations.

  7. The force-time profile of elite front crawl swimmers.

    Science.gov (United States)

    Formosa, Danielle P; Mason, Bruce; Burkett, Brendan

    2011-05-01

    In this study, we used recently developed technology to determine the force-time profile of elite swimmers, which enabled coaches to make informed decisions on technique modifications. Eight elite male swimmers with a FINA (Federation Internationale de Natation) rank of 900+ completed five passive (streamline tow) and five net force (arms and leg swimming) trials. Three 50-Hz cameras were used to video each trial and were synchronized to the kinetic data output from a force-platform, upon which a motorized towing device was mounted. Passive and net force trials were completed at the participant's maximal front crawl swimming velocity. For the constant tow velocity, the net force profile was presented as a force-time graph, and the limitation of a constant velocity assumption was acknowledged. This allowed minimum and maximum net forces and arm symmetry to be identified. At a mean velocity of 1.92+0.06 m s⁻¹, the mean passive drag for the swimmers was 80.3+4.0 N, and the mean net force was 262.4+33.4 N. The mean location in the stroke cycle for minimum and maximum net force production was at 45% (insweep phase) and 75% (upsweep phase) of the stroke, respectively. This force-time profile also identified any stroke asymmetry.

  8. D.NET case study

    International Development Research Centre (IDRC) Digital Library (Canada)

    lremy

    developing products, marketing tools and building capacity of the grass root telecentre workers. D.Net recognized that it had several ideas worth developing into small interventions that would make big differences, but resource constraints were a barrier for scaling-up these initiatives. More demands, limited resources.

  9. Surgery for GEP-NETs

    DEFF Research Database (Denmark)

    Knigge, Ulrich; Hansen, Carsten Palnæs

    2012-01-01

    Surgery is the only treatment that may cure the patient with gastroentero-pancreatic (GEP) neuroendocrine tumours (NET) and neuroendocrine carcinomas (NEC) and should always be considered as first line treatment if R0/R1 resection can be achieved. The surgical and interventional procedures for GEP...

  10. Net Neutrality in the Netherlands

    NARCIS (Netherlands)

    van Eijk, N.

    2014-01-01

    The Netherlands is among the first countries that have put specific net neutrality standards in place. The decision to implement specific regulation was influenced by at least three factors. The first was the prevailing social and academic debate, partly due to developments in the United States. The

  11. Complexity Metrics for Workflow Nets

    DEFF Research Database (Denmark)

    Lassen, Kristian Bisgaard; van der Aalst, Wil M.P.

    2009-01-01

    Process modeling languages such as EPCs, BPMN, flow charts, UML activity diagrams, Petri nets, etc.\\ are used to model business processes and to configure process-aware information systems. It is known that users have problems understanding these diagrams. In fact, even process engineers and system...

  12. Caught in the Net: Perineuronal Nets and Addiction

    Directory of Open Access Journals (Sweden)

    Megan Slaker

    2016-01-01

    Full Text Available Exposure to drugs of abuse induces plasticity in the brain and creates persistent drug-related memories. These changes in plasticity and persistent drug memories are believed to produce aberrant motivation and reinforcement contributing to addiction. Most studies have explored the effect drugs of abuse have on pre- and postsynaptic cells and astrocytes; however, more recently, attention has shifted to explore the effect these drugs have on the extracellular matrix (ECM. Within the ECM are unique structures arranged in a net-like manner, surrounding a subset of neurons called perineuronal nets (PNNs. This review focuses on drug-induced changes in PNNs, the molecules that regulate PNNs, and the expression of PNNs within brain circuitry mediating motivation, reward, and reinforcement as it pertains to addiction.

  13. Army Net Zero Prove Out. Army Net Zero Training Report

    Science.gov (United States)

    2014-11-20

    sensors were strategically placed throughout the installation by magnetically attaching them to water main valve stems. The sensors check sound...Recycle Wrap  Substitutes for Packaging Materials  Re-Use of Textiles and Linens  Setting Printers to Double-Sided Printing Net Zero Waste...can effectively achieve source reduction. Clean and Re-Use Shop Rags - Shop rags represent a large textile waste stream at many installations. As a

  14. Army Net Zero Prove Out. Net Zero Waste Best Practices

    Science.gov (United States)

    2014-11-20

    Anaerobic Digesters – Although anaerobic digestion is not a new technology and has been used on a large-scale basis in wastewater treatment , the...technology and has been used on a large-scale basis in wastewater treatment , the use of the technology should be demonstrated with other...approaches can be used for cardboard and cellulose -based packaging materials. This approach is in line with the Net Zero Waste hierarchy in terms of

  15. Alterations in Body Fluid Balance During Fin Swimming in 29 °C Water in a Population of Special Forces Divers.

    Science.gov (United States)

    Castagna, O; Desruelle, A V; Blatteau, J E; Schmid, B; Dumoulin, G; Regnard, J

    2015-12-01

    Highly trained "combat swimmers" encounter physiological difficulties when performing missions in warm water. The aim of this study was to assess the respective roles of immersion and physical activity in perturbing fluid balance of military divers on duty in warm water. 12 trained divers performed 2 dives each (2 h, 3 m depth) in fresh water at 29 °C. Divers either remained Static or swam continuously (Fin) during the dive. In the Fin condition, oxygen consumption and heart rate were 2-fold greater than during the Static dive. Core and skin temperatures were also higher (Fin: 38.5±0.4 °C and 36.2±0.3 °C and Static: 37.2±0.3 °C and 34.3±0.3 °C; respectively p=0.0002 and p=0.0003). During the Fin dive, the average mass loss was 989 g (39% urine loss, 41% sweating and 20% insensible water loss and blood sampling); Static divers lost 720 g (84% urine loss, 2% sweating and 14% insensible water loss and blood sampling) (p=0.003). In the Fin condition, a greater decrease in total body mass and greater sweating occurred, without effects on circulating renin and aldosterone concentrations; diuresis was reduced, and plasma volume decreased more than in the Static condition. © Georg Thieme Verlag KG Stuttgart · New York.

  16. HANPP Collection: Human Appropriation of Net Primary Productivity as a Percentage of Net Primary Productivity

    Data.gov (United States)

    National Aeronautics and Space Administration — The Human Appropriation of Net Primary Productivity (HANPP) as a Percentage of Net Primary Productivity (NPP) portion of the Human Appropriation of Net Primary...

  17. Hydrodynamic characteristics of plane netting used for aquaculture net cages in uniform current

    National Research Council Canada - National Science Library

    DONG, SHUCHUANG; HU, FUXIANG; KUMAZAWA, TAISEI; SIODE, DAISUKE; TOKAI, TADASHI

    2016-01-01

      The hydrodynamic characteristics of polyethylene (PE) netting and chain link wire netting with different types of twine diameter and mesh size for aquaculture net cages were examined by experiments in a flume tank...

  18. Isolated unit tests in .Net

    OpenAIRE

    Haukilehto, Tero

    2013-01-01

    In this thesis isolation in unit testing is studied to get a precise picture of the isolation frameworks available for .Net environment. At the beginning testing is discussed in theory with the benefits and the problems it may have been linked with. The theory includes software development in general in connection with testing. Theory of isolation is also described before the actual isolation frameworks are represented. Common frameworks are described in more detail and comparable informa...

  19. Mass distribution of free insecticide-treated nets do not interfere with continuous net distribution in Tanzania.

    Science.gov (United States)

    Eze, Ikenna C; Kramer, Karen; Msengwa, Amina; Mandike, Renata; Lengeler, Christian

    2014-05-27

    To protect the most vulnerable groups from malaria (pregnant women and infants) the Tanzanian Government introduced a subsidy (voucher) scheme in 2004, on the basis of a public-private partnership. These vouchers are provided to pregnant women at their first antenatal care visit and mothers of infants at first vaccination. The vouchers are redeemed at registered retailers for a long-lasting insecticidal net against the payment of a modest top-up price. The present work analysed a large body of data from the Tanzanian National Voucher Scheme, focusing on interactions with concurrent mass distribution campaigns of free nets. In an ecologic study involving all regions of Tanzania, voucher redemption data for the period 2007-2011, as well as data on potential determinants of voucher redemption were analysed. The four outcome variables were: pregnant woman and infant voucher redemption rates, use of treated bed nets by all household members and by under- five children. Each of the outcomes was regressed with selected determinants, using a generalized estimating equation model and accounting for regional data clustering. There was a consistent improvement in voucher redemption rates over the selected time period, with rates >80% in 2011. The major determinants of redemption rates were the top-up price paid by the voucher beneficiary, the retailer- clinic ratio, and socio-economic status. Improved redemption rates after 2009 were most likely due to reduced top-up prices (following a change in policy). Redemption rates were not affected by two major free net distribution campaigns. During this period, there was a consistent improvement in net use across all the regions, with rates of up to 75% in 2011. The key components of the National Treated Nets Programme (NATNETS) seem to work harmoniously, leading to a high level of net use in the entire population. This calls for the continuation of this effort in Tanzania and for emulation by other countries with endemic malaria.

  20. Manipulation of flow around bluff bodies by flexible slender filaments

    Science.gov (United States)

    Omidyeganeh, Mohammad; Pinelli, Alfredo

    2016-11-01

    Manipulation of bluff bodies wakes to control the intensity of fluid forces and the induced solid vibrations is of paramount importance. A biomimetic passive control based on the use of flexible slender appendages protruding from the body into the separated region has shown promising achievements in drag reduction and moderating force fluctuations. The present research aimed at understating and optimizing the physical properties and the arrangement of elongated flexible filaments to delay the 3D transition of the wake in terms of Reynolds number, mean drag reduction, and mitigation of the force fluctuations. The numerical campaign unveiled the role of flexural stiffness of the filaments: matching the natural frequency with the vortex shedding frequency enhances the mixing at the lee side. However, softer filaments (i.e. larger time scales) lock-in on either side of mid plane breaking the symmetry of the flow field (inducing a net lift force). In addition to 2D effects, the presence of filaments can interfere with the 3D bifurcation process resulting in a delay of the spanwise destabilization of the wake. The most effective parameter for this transitional interference is the spacing between filaments that should be smaller than the wavelength of the dominant 3D unstable mode.

  1. Rendimento corporal e composição química de jundiás alimentados com diferentes níveis de proteína e energia na dieta, criados em tanques-rede Catfish (jundia body yield and chemical composition fed different protein and energy level in the diet, reared in net-tanks

    Directory of Open Access Journals (Sweden)

    Adilson Reidel

    2010-02-01

    Full Text Available Objetivou-se analisar o rendimento corporal e a composição química de jundiás, Rhamdia quelen, alimentados com rações contendo diferentes níveis de proteína e energia e criados em sistema de tanques-rede. Utilizou-se a densidade inicial de 70 peixes/m³, em 18 tanques-rede (5,0 m³, durante 324 dias. O delineamento experimental foi inteiramente casualizado com dois fatores - níveis de proteína bruta (PB, 25, 30 ou 35%; e níveis de energia digestível (ED: 3.250 e 3.500 kcal - e três repetições. A dieta foi fornecida à vontade, mas mensurada diariamente. No início, um lote de peixes foi sacrificado para determinação dos parâmetros corporais e químicos. A cada 28 dias, dois peixes de cada unidade experimental foram abatidos para determinação dos comprimentos total e padrão, do peso total e dos pesos de fígado, gônadas, cabeça, tronco limpo e gordura visceral, respectivamente. Posteriormente, foram realizados cálculos dos índices hepatossomático e gonadossomático, da porcentagem de cabeça e do rendimento de carcaça e do rendimento de tronco limpo. A partir do mês de junho de 2006, também foram registrados o rendimento de filé e o sexo dos indivíduos. Para determinação da composição da carne do jundiá, foram realizadas as análises químicas de umidade, proteína bruta, lipídios e matéria mineral. O fornecimento da ração com 30% de PB resultou em maior rendimento de tronco limpo. A composição do músculo não foi influenciada pelas dietas testadas. Os melhores resultados foram obtidos com a utilização de dietas contendo 30% de PB e 3.250 kcal de energia digestível/kg.The objective of this study was to analyze the body yield and the chemical composition of catfish (jundia, Rhamdia quelen, reared in net-tanks and fed with diets containing different levels of protein and energy. An initial density of 70 fish/m³, in 18 net-tanks (5.0 m³ was used, for 324 days. A randomized complete design was used

  2. Annual Report 2009 (Project Air Force)

    Science.gov (United States)

    2009-01-01

    Through 60 years of collaboration, RAND Project AIR FORCE (PAF) has acquired unparalleled insight into Air Force strategy, forces, policy, resources, and manpower. We have developed a body of expertise and intellectual capital and are uniquely poised to provide policy recommendations on critical national security challenges. Working with the Air Force to translate these recommendations into decisions that have

  3. Event hierarchies in DanNet

    DEFF Research Database (Denmark)

    Pedersen, Bolette Sandford; Nimb, Sanni

    2008-01-01

    Artiklen omhandler udarbejdelsen af et verbumshierarki i det leksikalsk-semantiske ordnet, DanNet.......Artiklen omhandler udarbejdelsen af et verbumshierarki i det leksikalsk-semantiske ordnet, DanNet....

  4. The Uniframe .Net Web Service Discovery Service

    National Research Council Canada - National Science Library

    Berbeco, Robert W

    2003-01-01

    Microsoft .NET allows the creation of distributed systems in a seamless manner Within NET small, discrete applications, referred to as Web services, are utilized to connect to each other or larger applications...

  5. Long Term RadNet Quality Data

    Data.gov (United States)

    U.S. Environmental Protection Agency — This RadNet Quality Data Asset includes all data since initiation and when ERAMS was expanded to become RadNet, name changed to reflect new mission. This includes...

  6. Labor Force

    Science.gov (United States)

    Occupational Outlook Quarterly, 2012

    2012-01-01

    The labor force is the number of people ages 16 or older who are either working or looking for work. It does not include active-duty military personnel or the institutionalized population, such as prison inmates. Determining the size of the labor force is a way of determining how big the economy can get. The size of the labor force depends on two…

  7. PsychoNet: a psycholinguistc commonsense ontology

    OpenAIRE

    Mohtasseb, Haytham; Ahmed, Amr

    2010-01-01

    Ontologies have been widely accepted as the most advanced knowledge representation model. This paper introduces PsychoNet, a new knowledgebase that forms the link between psycholinguistic taxonomy, existing in LIWC, and its semantic textual representation in the form of commonsense semantic ontology, represented by ConceptNet. The integration of LIWC and ConceptNet and the added functionalities facilitate employing ConceptNet in psycholinguistic studies. Furthermore, it simplifies utilization...

  8. 78 FR 72451 - Net Investment Income Tax

    Science.gov (United States)

    2013-12-02

    ... Revenue Service 26 CFR Part 1 RIN 1545-BL74 Net Investment Income Tax AGENCY: Internal Revenue Service...). These regulations provide guidance on the computation of net investment income. The regulations affect... lesser of: (A) The individual's net investment income for such taxable year, or (B) the excess (if any...

  9. 47 CFR 69.302 - Net investment.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Net investment. 69.302 Section 69.302... Apportionment of Net Investment § 69.302 Net investment. (a) Investment in Accounts 2001, 1220 and Class B Rural...) Investment in Accounts 2002, 2003 and to the extent such inclusions are allowed by this Commission, Account...

  10. 47 CFR 65.450 - Net income.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Net income. 65.450 Section 65.450... OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Exchange Carriers § 65.450 Net income. (a) Net income shall consist of all revenues derived from the provision of interstate telecommunications services...

  11. 47 CFR 65.500 - Net income.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Net income. 65.500 Section 65.500... OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Interexchange Carriers § 65.500 Net income. The net income methodology specified in § 65.450 shall be utilized by all interexchange carriers that are...

  12. NetBeans IDE 8 cookbook

    CERN Document Server

    Salter, David

    2014-01-01

    If you're a Java developer of any level using NetBeans and want to learn how to get the most out of NetBeans, then this book is for you. Learning how to utilize NetBeans will provide a firm foundation for your Java application development.

  13. Characterizing behavioural congruences for Petri nets

    DEFF Research Database (Denmark)

    Nielsen, Mogens; Priese, Lutz; Sassone, Vladimiro

    1995-01-01

    We exploit a notion of interface for Petri nets in order to design a set of net combinators. For such a calculus of nets, we focus on the behavioural congruences arising from four simple notions of behaviour, viz., traces, maximal traces, step, and maximal step traces, and from the corresponding...

  14. 27 CFR 4.37 - Net contents.

    Science.gov (United States)

    2010-04-01

    ... the volume of wine within the container, except that the following tolerances shall be allowed: (1... THE TREASURY LIQUORS LABELING AND ADVERTISING OF WINE Labeling Requirements for Wine § 4.37 Net contents. (a) Statement of net contents. The net contents of wine for which a standard of fill is...

  15. NET 40 Generics Beginner's Guide

    CERN Document Server

    Mukherjee, Sudipta

    2012-01-01

    This is a concise, practical guide that will help you learn Generics in .NET, with lots of real world and fun-to-build examples and clear explanations. It is packed with screenshots to aid your understanding of the process. This book is aimed at beginners in Generics. It assumes some working knowledge of C# , but it isn't mandatory. The following would get the most use out of the book: Newbie C# developers struggling with Generics. Experienced C++ and Java Programmers who are migrating to C# and looking for an alternative to other generic frameworks like STL and JCF would find this book handy.

  16. The Net Reclassification Index (NRI)

    DEFF Research Database (Denmark)

    Pepe, Margaret S.; Fan, Jing; Feng, Ziding

    2015-01-01

    The Net Reclassification Index (NRI) is a very popular measure for evaluating the improvement in prediction performance gained by adding a marker to a set of baseline predictors. However, the statistical properties of this novel measure have not been explored in depth. We demonstrate the alarming...... marker is proven to erroneously yield a positive NRI. Some insight into this phenomenon is provided. Since large values for the NRI statistic may simply be due to use of poorly fitting risk models, we suggest caution in using the NRI as the basis for marker evaluation. Other measures of prediction...

  17. Jaw-muscle force and excursion scale with negative allometry in platyrrhine primates.

    Science.gov (United States)

    Taylor, Andrea B; Yuan, Tian; Ross, Callum F; Vinyard, Christopher J

    2015-07-14

    Platyrrhines span two orders of magnitude in body size and are characterized by diverse feeding behaviors and diets. While size plays an important role in primate feeding behavior and masticatory apparatus morphology, we know little about size-correlated changes in the force-generating (physiologic cross-sectional area; PCSA) and excursion/stretch (fiber length; Lf ) capabilities of the jaw-closing muscles in platyrrhines. We examined scaling relationships of the superficial masseter and temporalis muscles in 21 platyrrhine species. Previous work suggests that larger platyrrhines are at a mechanical disadvantage for generating bite forces compared with smaller platyrrhines. We hypothesize that scaling of jaw-muscle fiber architecture counters this size-correlated decrease in mechanical advantage. Thus, we predicted that jaw-muscle PCSAs and muscle weights scale with positive allometry while Lf s scale with negative allometry, relative to load-arm estimates for incisor/molar biting and chewing. Jaw-muscle PCSAs and Lf s appear to scale with negative allometry relative to load-arm estimates and body size. Negative allometry of jaw-muscle weights partially accounts for the size-correlated decreases in PCSA and Lf . Estimates of bite force also scale with negative allometry. Large-bodied platyrrhines (e.g., Alouatta) are at a relative disadvantage for generating jaw-muscle and bite force as well as jaw-muscle stretch, compared with smaller species (e.g., Callithrix). The net effect is that larger platyrrhines likely produce relatively smaller maximal bite forces compared with smaller taxa. Relative to small- and intermediate-sized platyrrhines, large-bodied platyrrhines feed on some of the least mechanically challenging foods, consistent with the size-correlated decrease in relative muscle and bite forces across the clade. Am J Phys Anthropol, 2015. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

  18. Forced marriage.

    Science.gov (United States)

    2007-06-01

    Guidelines to help A&E staff and other healthcare professionals who suspect cases of forced marriage were launched this month by the government. The guidelines provide practical advice on how to recognise the warning signs, and what to do if patients disclose that they have been, or are about to be, forced to marry. The guidelines, Dealing with Cases of Forced Marriage, are available at www.fco.gov.uk/forcedmarriage.

  19. 136 Sn and three-body forces

    Indian Academy of Sciences (India)

    2015-07-29

    + excitation energies of even–even tin isotopes with > 82 compared to those with N < 82. However, none of the theoretical predictions using both realistic and empirical interactions can reproduce experimental data on ...

  20. Composição corporal e exigências líquidas de proteína e energia de bovinos de quatro grupos genéticos terminados em confinamento Body composition and protein and energy net requeriments of steers of four genetic groups finished in feedlot

    Directory of Open Access Journals (Sweden)

    Rodrigo Silva Goulart

    2008-05-01

    four treatments: Nellore (NE, ½ Aberdeen Angus + ½ Nellore (AN, ½ Canchim + ½ Nellore (CN e ½ Simmental + ½ Nellore (SN. Forty-seven steers averaging 310 kg initial shrunk body weight (SBW and 22 months were fed during 101 days in a feedlot. Diet on feedlot had the following composition: crude protein, 13.34%; rumen degradable protein, 9.35%; and total digestible nutrients, 71.81% (estimated value. Composition of the 9th-10th-11th ribs was used to calculate empty body composition. No significant differences were found between AN (428 kg and SN (410 kg in final empty body weight (EBW, and similarly among CN, NE and SN (389, 390 and 410 kg, respectively, but EBW of AN steers was greater than that of CN and NE cattle. AN steers had higher amount of fat percentage on rib cut. However, less proportion of muscle was observed in the AN group and less bone percentage at the rib cut of the Nelore breed. AN and SN groups had the largest concentration of ether extract and the smallest amount of water percentage on the empty body at slaughter. Steers of AN, NE and SN groups were similar in rate of energy deposition (6.06, 5.20 and 5.80 Mcal/day, respectively. There was no difference among AN and CN cattle on ether extract in empty body weight gain. Simmental × Nelore demonstrated the greatest requirements of protein (0.164 kg/kg of EWG, and AN and CN cattle (0.140 and 0.142 kg/kg of EWG, respectively, the smallest. Angus × Nelore animals required the greatest net energy for gain (4.685 Mcal/kg of EWG.

  1. -Net Approach to Sensor -Coverage

    Directory of Open Access Journals (Sweden)

    Fusco Giordano

    2010-01-01

    Full Text Available Wireless sensors rely on battery power, and in many applications it is difficult or prohibitive to replace them. Hence, in order to prolongate the system's lifetime, some sensors can be kept inactive while others perform all the tasks. In this paper, we study the -coverage problem of activating the minimum number of sensors to ensure that every point in the area is covered by at least sensors. This ensures higher fault tolerance, robustness, and improves many operations, among which position detection and intrusion detection. The -coverage problem is trivially NP-complete, and hence we can only provide approximation algorithms. In this paper, we present an algorithm based on an extension of the classical -net technique. This method gives an -approximation, where is the number of sensors in an optimal solution. We do not make any particular assumption on the shape of the areas covered by each sensor, besides that they must be closed, connected, and without holes.

  2. NETS - Danish participation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Alsen, S. (Grontmij - Carl Bro, Glostrup (Denmark)); Theel, C. (Baltic Sea Solutions, Holeby (Denmark))

    2008-12-15

    Within the NICe-funded project 'Nordic Environmental Technology Solutions (NETS)' a new type of networking at the Nordic level was organized in order to jointly exploit the rapidly growing market potential in the environmental technology sector. The project aimed at increased and professionalized commercialization of Nordic Cleantech in energy and water business segments through 1) closer cooperation and joint marketing activities, 2) a website, 3) cleantech product information via brochures and publications 4) and participating in relevant trade fairs and other industry events. Facilitating business-to-business activities was another core task for the NETS project partners from Norway, Sweden, Finland and Denmark with the aim to encourage total solutions for combined Cleantech system offers. The project has achieved to establish a Cleantech register of 600 Nordic Cleantech companies, a network of 86 member enterprises, produced several publications and brochures for direct technology promotion and a website for direct access to company profiles and contact data. The project partners have attended 14 relevant international Cleantech trade fairs and conferences and facilitated business-to-business contacts added by capacity building offers through two company workshops. The future challenge for the project partners and Nordic Cleantech will be to coordinate the numerous efforts within the Nordic countries in order to reach concerted action and binding of member companies for reliable services, an improved visibility and knowledge exchange. With Cleantech's growing market influence and public awareness, the need to develop total solutions is increasing likewise. Marketing efforts should be encouraged cross-sectional and cross-border among the various levels of involved actors from both the public and the private sector. (au)

  3. Histopathological Comparison of Mosquito Net with Polypropylene Mesh for Hernia Repair: An Experimental Study in Rats

    OpenAIRE

    Sharma, Mukesh; Sharma, Deepti Bala; Chandrakar, Shiv Kumar; Sharma, Dhananjaya

    2013-01-01

    Use of mosquito net, in place of polypropylene mesh, had been reported for tension-free hernia repair, as a better cost-effective option. This experimental histopathological study was performed in rats to find out the tissue response and the foreign body reaction and its comparison between commercial polypropylene mesh and the sterilized mosquito net. This experimental study was conducted in the Department of Surgery, Government NSCB, Medical College, Jabalpur (Madhya Pradesh), India. It was ...

  4. AFM characterization of protein net formation on a fibrous medium

    Directory of Open Access Journals (Sweden)

    Assis O.B.G.

    2000-01-01

    Full Text Available Lysozyme protein net is set on a glass fiber support using the self-assembly technique. Enzymatic film formation is followed by surface imaging via atomic force microscopy (AFM. Change in roughness as a function of deposition time is used as an indirect indicator of film formation. The objective was to form a protein film that would have no effect on the permeability of the medium, aiming at its application as a bioactive membrane or reactor suitable for bacteria and chemical interactions in aqueous media.

  5. Application and Theory of Petri Nets

    DEFF Research Database (Denmark)

    This volume contains the proceedings of the 13th International Conference onApplication and Theory of Petri Nets, held in Sheffield, England, in June 1992. The aim of the Petri net conferences is to create a forum for discussing progress in the application and theory of Petri nets. Typically....... Balbo and W. Reisig, 18 submitted papers, and seven project papers. The submitted papers and project presentations were selectedby the programme committee and a panel of referees from a large number of submissions....

  6. Are You Neutral About Net Neutrality

    Science.gov (United States)

    2007-06-20

    Information Resources Management College National Defense University Are You Neutral About Net Neutrality ? A presentation for Systems & Software...author uses Verizon FiOS for phone, TV, and internet service 3 Agenda Net Neutrality —Through 2 Lenses Who Are the Players & What Are They Saying...Medical Treatment Mini-Case Studies Updates Closing Thoughts 4 Working Definitions of Net Neutrality "Network Neutrality" is the concept that

  7. Texture Based Image Analysis With Neural Nets

    Science.gov (United States)

    Ilovici, Irina S.; Ong, Hoo-Tee; Ostrander, Kim E.

    1990-03-01

    In this paper, we combine direct image statistics and spatial frequency domain techniques with a neural net model to analyze texture based images. The resultant optimal texture features obtained from the direct and transformed image form the exemplar pattern of the neural net. The proposed approach introduces an automated texture analysis applied to metallography for determining the cooling rate and mechanical working of the materials. The results suggest that the proposed method enhances the practical applications of neural nets and texture extraction features.

  8. Factors associated with mosquito net use by individuals in households owning nets in Ethiopia

    Directory of Open Access Journals (Sweden)

    Graves Patricia M

    2011-12-01

    Full Text Available Abstract Background Ownership of insecticidal mosquito nets has dramatically increased in Ethiopia since 2006, but the proportion of persons with access to such nets who use them has declined. It is important to understand individual level net use factors in the context of the home to modify programmes so as to maximize net use. Methods Generalized linear latent and mixed models (GLLAMM were used to investigate net use using individual level data from people living in net-owning households from two surveys in Ethiopia: baseline 2006 included 12,678 individuals from 2,468 households and a sub-sample of the Malaria Indicator Survey (MIS in 2007 included 14,663 individuals from 3,353 households. Individual factors (age, sex, pregnancy; net factors (condition, age, net density; household factors (number of rooms [2006] or sleeping spaces [2007], IRS, women's knowledge and school attendance [2007 only], wealth, altitude; and cluster level factors (rural or urban were investigated in univariate and multi-variable models for each survey. Results In 2006, increased net use was associated with: age 25-49 years (adjusted (a OR = 1.4, 95% confidence interval (CI 1.2-1.7 compared to children U5; female gender (aOR = 1.4; 95% CI 1.2-1.5; fewer nets with holes (Ptrend = 0.002; and increasing net density (Ptrend [all nets in HH good] = 1.6; 95% CI 1.2-2.1; increasing net density (Ptrend [per additional space] = 0.6, 95% CI 0.5-0.7; more old nets (aOR [all nets in HH older than 12 months] = 0.5; 95% CI 0.3-0.7; and increasing household altitude (Ptrend Conclusion In both surveys, net use was more likely by women, if nets had fewer holes and were at higher net per person density within households. School-age children and young adults were much less likely to use a net. Increasing availability of nets within households (i.e. increasing net density, and improving net condition while focusing on education and promotion of net use, especially in school-age children

  9. Pro Agile NET Development with Scrum

    CERN Document Server

    Blankenship, Jerrel; Millett, Scott

    2011-01-01

    Pro Agile .NET Development with SCRUM guides you through a real-world ASP.NET project and shows how agile methodology is put into practice. There is plenty of literature on the theory behind agile methodologies, but no book on the market takes the concepts of agile practices and applies these in a practical manner to an end-to-end ASP.NET project, especially the estimating, requirements and management aspects of a project. Pro Agile .NET Development with SCRUM takes you through the initial stages of a project - gathering requirements and setting up an environment - through to the development a

  10. Pro ASP.NET MVC 4

    CERN Document Server

    Freeman, Adam

    2012-01-01

    The ASP.NET MVC 4 Framework is the latest evolution of Microsoft's ASP.NET web platform. It provides a high-productivity programming model that promotes cleaner code architecture, test-driven development, and powerful extensibility, combined with all the benefits of ASP.NET. ASP.NET MVC 4 contains a number of significant advances over previous versions. New mobile and desktop templates (employing adaptive rendering) are included together with support for jQuery Mobile for the first time. New display modes allow your application to select views based on the browser that's making the request whi

  11. Professional Visual Basic 2010 and .NET 4

    CERN Document Server

    Sheldon, Bill; Sharkey, Kent

    2010-01-01

    Intermediate and advanced coverage of Visual Basic 2010 and .NET 4 for professional developers. If you've already covered the basics and want to dive deep into VB and .NET topics that professional programmers use most, this is your book. You'll find a quick review of introductory topics-always helpful-before the author team of experts moves you quickly into such topics as data access with ADO.NET, Language Integrated Query (LINQ), security, ASP.NET web programming with Visual Basic, Windows workflow, threading, and more. You'll explore all the new features of Visual Basic 2010 as well as all t

  12. NASA Net Zero Energy Buildings Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Pless, S.; Scheib, J.; Torcellini, P.; Hendron, B.; Slovensky, M.

    2014-10-01

    In preparation for the time-phased net zero energy requirement for new federal buildings starting in 2020, set forth in Executive Order 13514, NASA requested that the National Renewable Energy Laboratory (NREL) to develop a roadmap for NASA's compliance. NASA detailed a Statement of Work that requested information on strategic, organizational, and tactical aspects of net zero energy buildings. In response, this document presents a high-level approach to net zero energy planning, design, construction, and operations, based on NREL's first-hand experience procuring net zero energy construction, and based on NREL and other industry research on net zero energy feasibility. The strategic approach to net zero energy starts with an interpretation of the executive order language relating to net zero energy. Specifically, this roadmap defines a net zero energy acquisition process as one that sets an aggressive energy use intensity goal for the building in project planning, meets the reduced demand goal through energy efficiency strategies and technologies, then adds renewable energy in a prioritized manner, using building-associated, emission- free sources first, to offset the annual energy use required at the building; the net zero energy process extends through the life of the building, requiring a balance of energy use and production in each calendar year.

  13. Towards a Standard for Modular Petri Nets

    DEFF Research Database (Denmark)

    Kindler, Ekkart; Petrucci, Laure

    2009-01-01

    When designing complex systems, mechanisms for structuring, composing, and reusing system components are crucial. Today, there are many approaches for equipping Petri nets with such mechanisms. In the context of defining a standard interchange format for Petri nets, modular PNML was defined....... Moreover, we present and discuss some more advanced features of modular Petri nets that could be included in the standard. This way, we provide a formal foundation and a basis for a discussion of features to be included in the upcoming standard of a module concept for Petri nets in general and for high...

  14. The Human Body Sword

    Directory of Open Access Journals (Sweden)

    Kris Borer

    2010-08-01

    Full Text Available The human body shield problem involves an apparent dilemma for a libertarian, forcing him to choose between his own death and the death of an innocent person. This paper argues that the non-aggression principle permits a forceful response against the property of innocent individuals when a conflict is initiated with that property. In other words, a libertarian may shoot the hostage in order to save himself.

  15. Experiments and simulation of a net closing mechanism for tether-net capture of space debris

    Science.gov (United States)

    Sharf, Inna; Thomsen, Benjamin; Botta, Eleonora M.; Misra, Arun K.

    2017-10-01

    This research addresses the design and testing of a debris containment system for use in a tether-net approach to space debris removal. The tether-net active debris removal involves the ejection of a net from a spacecraft by applying impulses to masses on the net, subsequent expansion of the net, the envelopment and capture of the debris target, and the de-orbiting of the debris via a tether to the chaser spacecraft. To ensure a debris removal mission's success, it is important that the debris be successfully captured and then, secured within the net. To this end, we present a concept for a net closing mechanism, which we believe will permit consistently successful debris capture via a simple and unobtrusive design. This net closing system functions by extending the main tether connecting the chaser spacecraft and the net vertex to the perimeter and around the perimeter of the net, allowing the tether to actuate closure of the net in a manner similar to a cinch cord. A particular embodiment of the design in a laboratory test-bed is described: the test-bed itself is comprised of a scaled-down tether-net, a supporting frame and a mock-up debris. Experiments conducted with the facility demonstrate the practicality of the net closing system. A model of the net closure concept has been integrated into the previously developed dynamics simulator of the chaser/tether-net/debris system. Simulations under tether tensioning conditions demonstrate the effectiveness of the closure concept for debris containment, in the gravity-free environment of space, for a realistic debris target. The on-ground experimental test-bed is also used to showcase its utility for validating the dynamics simulation of the net deployment, and a full-scale automated setup would make possible a range of validation studies of other aspects of a tether-net debris capture mission.

  16. Using Magnetic Forces to Probe the Gravi-response of Swimming Paramecium

    Science.gov (United States)

    Guevorkian, Karine; Valles, James M., Jr.

    2004-03-01

    Paramecium Caudatum, a single celled ciliate, alters its swimming behavior when subjected to different gravity environments (e.g. centrifugation and micro-gravity). To dissect the mechanisms behind this gravi-response and that of other biological systems, we are developing the use of magnetic body forces as a means of creating a rapidly tunable, simulated variable gravity environment. Since biological materials are weakly diamagnetic, we must subject them to intense inhomogeneous magnetic fields with characteristic field-field gradient products on the order of 16 T^2/cm. We will describe experiments on Paramecium Caudatum in which we adjust their net buoyancy with magnetic forces and measure the resulting changes in their swimming behavior.

  17. Body Image

    Science.gov (United States)

    ... Blog About Us Contact Us Text size | Print | Body Image Developing a positive body image and a healthy mental attitude is crucial ... Read on for tips to have a healthy body image. Â Topics About body image When you ...

  18. Body Hair

    Science.gov (United States)

    ... www.girlshealth.gov/ Home Body Puberty Body hair Body hair Even before you get your first period , you ... spreads up in a V shape over time. Body hair is normal, and some people think it looks ...

  19. HANPP Collection: Human Appropriation of Net Primary Productivity as a Percentage of Net Primary Productivity

    Data.gov (United States)

    National Aeronautics and Space Administration — The Human Appropriation of Net Primary Productivity (HANPP) as a Percentage of Net Primary Product (NPP) portion of the HANPP Collection represents a map identifying...

  20. Price smarter on the Net.

    Science.gov (United States)

    Baker, W; Marn, M; Zawada, C

    2001-02-01

    Companies generally have set prices on the Internet in two ways. Many start-ups have offered untenably low prices in a rush to capture first-mover advantage. Many incumbents have simply charged the same prices on-line as they do off-line. Either way, companies are missing a big opportunity. The fundamental value of the Internet lies not in lowering prices or making them consistent but in optimizing them. After all, if it's easy for customers to compare prices on the Internet, it's also easy for companies to track customers' behavior and adjust prices accordingly. The Net lets companies optimize prices in three ways. First, it lets them set and announce prices with greater precision. Different prices can be tested easily, and customers' responses can be collected instantly. Companies can set the most profitable prices, and they can tap into previously hidden customer demand. Second, because it's so easy to change prices on the Internet, companies can adjust prices in response to even small fluctuations in market conditions, customer demand, or competitors' behavior. Third, companies can use the clickstream data and purchase histories that it collects through the Internet to segment customers quickly. Then it can offer segment-specific prices or promotions immediately. By taking full advantage of the unique possibilities afforded by the Internet to set prices with precision, adapt to changing circumstances quickly, and segment customers accurately, companies can get their pricing right. It's one of the ultimate drivers of e-business success.

  1. AN-CASE NET-CENTRIC modeling and simulation

    Science.gov (United States)

    Baskinger, Patricia J.; Chruscicki, Mary Carol; Turck, Kurt

    2009-05-01

    The objective of mission training exercises is to immerse the trainees into an environment that enables them to train like they would fight. The integration of modeling and simulation environments that can seamlessly leverage Live systems, and Virtual or Constructive models (LVC) as they are available offers a flexible and cost effective solution to extending the "war-gaming" environment to a realistic mission experience while evolving the development of the net-centric enterprise. From concept to full production, the impact of new capabilities on the infrastructure and concept of operations, can be assessed in the context of the enterprise, while also exposing them to the warfighter. Training is extended to tomorrow's tools, processes, and Tactics, Techniques and Procedures (TTPs). This paper addresses the challenges of a net-centric modeling and simulation environment that is capable of representing a net-centric enterprise. An overview of the Air Force Research Laboratory's (AFRL) Airborne Networking Component Architecture Simulation Environment (AN-CASE) is provide as well as a discussion on how it is being used to assess technologies for the purpose of experimenting with new infrastructure mechanisms that enhance the scalability and reliability of the distributed mission operations environment.

  2. Rigid Bodies in Contact

    DEFF Research Database (Denmark)

    Niebe, Sarah Maria

    The topic of this thesis is the numerics of rigid body simulation, with focus on the contact force problem. Three contact force models are presented, followed by three contact point determination methods. To solve the contact force problem, six different numerical methods are presented, each......-Seidel (PGS), although computationally more expensive. The NNCG method has been implemented in the physics library Bullet, as of revision r2709, as an alternative to the PGS method. A subspace minimization method is developed to improve convergence of the PGS method, improving the results of large mass ratio...

  3. 78 FR 72393 - Net Investment Income Tax

    Science.gov (United States)

    2013-12-02

    ... Investment Income Tax; Final and Proposed Rules #0;#0;Federal Register / Vol. 78, No. 231 / Monday, December... Parts 1 and 602 RIN 1545-BK44 Net Investment Income Tax AGENCY: Internal Revenue Service (IRS), Treasury... Investment Income Tax and the computation of Net Investment Income. The regulations affect individuals...

  4. 77 FR 72611 - Net Investment Income Tax

    Science.gov (United States)

    2012-12-05

    ... December 5, 2012 Part V Department of the Treasury Internal Revenue Service 26 CFR Part 1 Net Investment... Investment Income Tax AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of proposed rulemaking...) the individual's net investment income for such taxable year, or (B) the excess (if any) of (i) the...

  5. Net analyte signal based statistical quality control

    NARCIS (Netherlands)

    Skibsted, E.T.S.; Boelens, H.F.M.; Westerhuis, J.A.; Smilde, A.K.; Broad, N.W.; Rees, D.R.; Witte, D.T.

    2005-01-01

    Net analyte signal statistical quality control (NAS-SQC) is a new methodology to perform multivariate product quality monitoring based on the net analyte signal approach. The main advantage of NAS-SQC is that the systematic variation in the product due to the analyte (or property) of interest is

  6. Asynchronous stream processing with S-Net

    NARCIS (Netherlands)

    Grelck, C.; Scholz, S.-B.; Shafarenko, A.

    2010-01-01

    We present the rationale and design of S-Net, a coordination language for asynchronous stream processing. The language achieves a near-complete separation between the application code, written in any conventional programming language, and the coordination/communication code written in S-Net. Our

  7. Using the MVC architecture on . NET platform

    OpenAIRE

    Ježek, David

    2011-01-01

    This thesis deals with usage of MVC (Model View Controller) technology in web development on ASP.NET platform from Microsoft. Mainly it deals with latest version of framework ASP.NET MVC 3. First part describes MVC architecture and the second describes usage of MVC in certain parts of web application an comparing with PHP.

  8. Analysis of Petri Nets and Transition Systems

    Directory of Open Access Journals (Sweden)

    Eike Best

    2015-08-01

    Full Text Available This paper describes a stand-alone, no-frills tool supporting the analysis of (labelled place/transition Petri nets and the synthesis of labelled transition systems into Petri nets. It is implemented as a collection of independent, dedicated algorithms which have been designed to operate modularly, portably, extensibly, and efficiently.

  9. 27 CFR 7.27 - Net contents.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Net contents. 7.27 Section 7.27 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF... the net contents are displayed by having the same blown, branded, or burned in the container in...

  10. Petri nets and other models of concurrency

    DEFF Research Database (Denmark)

    Nielsen, Mogens; Sassone, Vladimiro

    1998-01-01

    This paper retraces, collects, and summarises contributions of the authors - in collaboration with others - on the theme of Petri nets and their categorical relationships to other models of concurrency.......This paper retraces, collects, and summarises contributions of the authors - in collaboration with others - on the theme of Petri nets and their categorical relationships to other models of concurrency....

  11. Delta Semantics Defined By Petri Nets

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kyng, Morten; Madsen, Ole Lehrmann

    This report is identical to an earlier version of May 1978 except that Chapter 5 has been revised. A new paper: "A Petri Net Definition of a System Description Language", DAIMI, April 1979, 20 pages, extends the Petri net model to include a data state representing the program variables. Delta...

  12. Net neutrality and inflation of traffic

    NARCIS (Netherlands)

    Peitz, M.; Schütt, Florian

    Under strict net neutrality Internet service providers (ISPs) are required to carry data without any differentiation and at no cost to the content provider. We provide a simple framework with a monopoly ISP to evaluate the short-run effects of different net neutrality rules. Content differs in its

  13. Net Neutrality and Inflation of Traffic

    NARCIS (Netherlands)

    Peitz, M.; Schütt, F.

    2015-01-01

    Under strict net neutrality Internet service providers (ISPs) are required to carry data without any differentiation and at no cost to the content provider. We provide a simple framework with a monopoly ISP to evaluate different net neutrality rules. Content differs in its sensitivity to delay.

  14. The Net Neutrality Debate: The Basics

    Science.gov (United States)

    Greenfield, Rich

    2006-01-01

    Rich Greenfield examines the basics of today's net neutrality debate that is likely to be an ongoing issue for society. Greenfield states the problems inherent in the definition of "net neutrality" used by Common Cause: "Network neutrality is the principle that Internet users should be able to access any web content they choose and…

  15. Dynamic response of the thermometric net radiometer

    Science.gov (United States)

    J. D. Wilson; W. J. Massman; G. E. Swaters

    2009-01-01

    We computed the dynamic response of an idealized thermometric net radiometer, when driven by an oscillating net longwave radiation intended roughly to simulate rapid fluctuations of the radiative environment such as might be expected during field use of such devices. The study was motivated by curiosity as to whether non-linearity of the surface boundary conditions...

  16. Teaching and Learning with the Net Generation

    Science.gov (United States)

    Barnes, Kassandra; Marateo, Raymond C.; Ferris, S. Pixy

    2007-01-01

    As the Net Generation places increasingly greater demands on educators, students and teachers must jointly consider innovative ways of teaching and learning. In this, educators are supported by the fact that the Net Generation wants to learn. However, these same educators should not fail to realize that this generation learns differently from…

  17. Verification of Timed-Arc Petri Nets

    DEFF Research Database (Denmark)

    Jacobsen, Lasse; Jacobsen, Morten; Møller, Mikael Harkjær

    2011-01-01

    Timed-Arc Petri Nets (TAPN) are an extension of the classical P/T nets with continuous time. Tokens in TAPN carry an age and arcs between places and transitions are labelled with time intervals restricting the age of tokens available for transition firing. The TAPN model posses a number...

  18. A Brief Introduction to Coloured Petri Nets

    DEFF Research Database (Denmark)

    Jensen, Kurt

    1997-01-01

    Coloured Petri Nets (CP-nets or CPN) is a graphical oriented language for design, specification, simulation and verification of systems. It is in particular well- suited for systems in which communication, synchronisation and resource sharing are important. Typical examples of application areas a...

  19. The Evolution of the Civil Affairs Force

    Science.gov (United States)

    2013-12-01

    on their roles as a joint force commanders in the event of large-scale disasters, such as Hurricane Sandy, or a large scale earthquake” ( Baltos , 2012...fsID=5286&page=1 Anklam, P. (2007). Net work. Burlington, MA: Butterworth Heinemann. Baltos , C. (2012). Army north helps prepare future dual-status

  20. Gill net and trammel net selectivity in the northern Aegean Sea, Turkey

    Directory of Open Access Journals (Sweden)

    F. Saadet Karakulak

    2008-09-01

    Full Text Available Fishing trials were carried out with gill nets and trammel nets in the northern Aegean Sea from March 2004 to February 2005. Four different mesh sizes for the gill nets and the inner panel of trammel nets (16, 18, 20 and 22 mm bar length were used. Selectivity parameters for the five most economically important species, bogue (Boops boops, annular sea bream (Diplodus annularis, striped red mullet (Mullus surmuletus, axillary sea bream (Pagellus acarne and blotched picarel (Spicara maena, caught by the two gears were estimated. The SELECT method was used to estimate the selectivity parameters of a variety of models. Catch composition and catch proportion of several species were different in gill and trammel nets. The length frequency distributions of the species caught by the two gears were significantly different. The bi-modal model selectivity curve gave the best fit for gill net and trammel net data, and there was little difference between the modal lengths of these nets. However, a clear difference was found in catching efficiency. The highest catch rates were obtained with the trammel net. Given that many discard species and small fish are caught by gill nets and trammel nets with a mesh size of 16 mm, it is clear that these nets are not appropriate for fisheries. Consequently, the best mesh size for multispecies fisheries is 18 mm. This mesh size will considerably reduce the numbers of small sized individuals and discard species in the catch.

  1. Relationship between relative net vertical impulse and jump height in jump squats performed to various squat depths and with various loads.

    Science.gov (United States)

    McBride, Jeffrey M; Kirby, Tyler J; Haines, Tracie L; Skinner, Jared

    2010-12-01

    The purpose of the current investigation was to determine the relationship between relative net vertical impulse (net vertical impulse (VI)) and jump height in the jump squat (JS) going to different squat depths and utilizing various loads. Ten males with two years of jumping experience participated in this investigation (Age: 21.8 ± 1.9 y; Height: 176.9 ± 5.2 cm; Body Mass: 79.0 ± 7.1 kg, 1RM: 131.8 ± 29.5 kg, 1RM/BM: 1.66 ± 0.27). Subjects performed a series of static jumps (SJS) and countermovement jumps (CMJJS) with various loads (Body Mass, 20% of 1RM, 40% of 1RM) in a randomized fashion to a depth of 0.15, 0.30, 0.45, 0.60, and 0.75 m and a self-selected depth. During the concentric phase of each JS, peak force (PF), peak power (PP), jump height (JH) and relative VI were recorded and analyzed. Increasing squat depth corresponded to a decrease in PF and an increase in JH, relative VI for both SJS and CMJJS during all loads. Across all squat depths and loading conditions relative VI was statistically significantly correlated to JH in the SJS (r = .8956, P performance, regardless of squat depth and loading condition. However, relative VI may be the best predictor of JS performance with PF being the worst predictor of JS performance.

  2. Discrete, continuous, and hybrid petri nets

    CERN Document Server

    David, René

    2004-01-01

    Petri nets do not designate a single modeling formalism. In fact, newcomers to the field confess sometimes to be a little puzzled by the diversity of formalisms that are recognized under this "umbrella". Disregarding some extensions to the theoretical modeling capabilities, and looking at the level of abstraction of the formalisms, Condition/Event, Elementary, Place/Transition, Predicate/Transition, Colored, Object Oriented... net systems are frequently encountered in the literature. On the other side, provided with appropriate interpretative extensions, Controled Net Systems, Marking Diagrams (the Petri net generalization of State Diagrams), or the many-many variants in which time can be explicitly incorporated -Time(d), Deterministic, (Generalized) Stochastic, Fuzzy...- are defined. This represents another way to define practical formalisms that can be obtained by the "cro- product" of the two mentioned dimensions. Thus Petri nets constitute a modeling paradigm, understandable in a broad sense as "the total...

  3. StreamNet, 1999-2000 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Bruce; Roger, Phil; Butterfield, Bart (Pacific States Marine Fisheries Commission, Gladstone, OR)

    2001-09-01

    able to utilize data for comparison or analysis over the entire basin from multiple agencies, it is necessary to standardize the data to the degree possible so that like-data are equivalent over jurisdictional lines. Since the data are not collected in a standardized way, StreamNet fulfills that role by acquiring the data sets and converting the data from all agencies into the standardized DEF. Where field methodologies differ to the degree that the data can not be made comparable, the data are presented as different data types. This way, data are converted only once and made available for research, management and administrative purposes instead of forcing each person needing basin wide data to attempt data standardization individually.

  4. Pro visual C++/CLI and the net 35 platform

    CERN Document Server

    Fraser, Stephen

    2008-01-01

    Pro Visual C++/CLI and the .NET 3.5 Platform is about writing .NET applications using C++/CLI. While readers are learning the ins and outs of .NET application development, they will also be learning the syntax of C++, both old and new to .NET. Readers will also gain a good understanding of the .NET architecture. This is truly a .NET book applying C++ as its development language not another C++ syntax book that happens to cover .NET.

  5. Field issues related to effectiveness of insecticide-treated nets in Tanzania.

    Science.gov (United States)

    Erlanger, T E; Enayati, A A; Hemingway, J; Mshinda, H; Tami, A; Lengeler, C

    2004-06-01

    Insecticide-treated nets (ITNs) impregnated with pyrethroid insecticides have become one of the most promising interventions to prevent malaria in highly endemic areas. Despite the large body of experience documenting their health impact and the best way to distribute them, some key practical issues remain unresolved. For example, the duration of effective life of a net under field conditions is unknown. The most important factor affecting net effectiveness is the issue of regular re-treatment with insecticide. Washing is also an important determinant of insecticide longevity in the field. Trials were undertaken to provide some essential field information on ITNs within the site of an extended ITN programme in the Morogoro region of Tanzania. It was found that 45% of all nets were in bad condition (defined as more than seven large holes). It is concluded that an effective 'life' for polyester nets is 2-3 years. Further, two-thirds of the 20% of nets that were reported as having been re-treated within the last 12 months had less than 5 mg/m(2) of insecticide. According to the World Health Organization this is insufficient to be effective. People reported that they washed their nets four to seven times per year, usually with soap. Observations showed that such washing does not harm the nets and that the wash-water was unlikely to have an impact on the environment. Finally, bioassays were carried out with Anopheles gambiae on polyester netting with 0.5, 2, 5, 10 and 30 mg/m(2) of deltamethrin, alphacypermethrin and lambdacyhalothrin to assess the effectiveness of pyrethroids. The results confirmed that even with low insecticide concentrations, nets can still provide partial protection.

  6. High School Physical Education Requirements and Youth Body Weight: New Evidence from the YRBS.

    Science.gov (United States)

    Sabia, Joseph J; Nguyen, Thanh Tam; Rosenberg, Oren

    2017-10-01

    Previous research has found that high school physical education (PE) requirements are largely ineffective at reducing youth body weight. However, these studies were forced to rely on cross-state variation in PE requirements to identify their impacts, raising concerns that estimated policy effects may be confounded by state-level unobservables. Using data from the State and National Youth Risk Behavior Surveys and exploiting recent changes in state high school PE laws, we re-examine the effect of PE requirements on body weight. Our estimates show that a one-semester increase in PE requirements is associated with a 10 to 13% increase in minutes per week spent physically active in PE classes, but with no change in net vigorous exercise and little change in youth body weight. We conclude that substitution of in-school for outside-of-school physical activity and small resultant net energy expenditures can explain the absence of body weight effects. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  7. Rotor/body aerodynamic interactions

    Science.gov (United States)

    Betzina, M. D.; Smith, C. A.; Shinoda, P.

    1985-01-01

    A wind tunnel investigation was conducted in which independent, steady state aerodynamic forces and moments were measured on a 2.24 m diam. two bladed helicopter rotor and on several different bodies. The mutual interaction effects for variations in velocity, thrust, tip-path-plane angle of attack, body angle of attack, rotor/body position, and body geometry were determined. The results show that the body longitudinal aerodynamic characteristics are significantly affected by the presence of a rotor and hub, and that the hub interference may be a major part of such interaction. The effects of the body on the rotor performance are presented.

  8. KONVERGENSI DALAM PROGRAM NET CITIZEN JOURNALISM

    Directory of Open Access Journals (Sweden)

    Rhafidilla Vebrynda

    2017-06-01

    Full Text Available Di dalam artikel ini, peneliti ingin melihat perkembangan teknologi di Indonesia sebagai sebuah peluang untuk menjalankan sebuah program berita berbasis video kiriman masyarakat. Perkembangan teknologi tersebut adalah teknologi penyiaran, teknologi sosial media dan teknologi dalam proses produksi sebuah video. Di Indonesia, jumlah televisi semakin banyak. Setiap stasiun televisi harus bersaing untuk dapat bertahan hidup. Net TV merupakan sebuah stasiun televisi baru di Indonesia yang harus memiliki berbagai program unggulan baru agar dapat bersaing dengan televisi lainnya yang sudah ada. Net TV menggunakan berbagai platform media untuk menjalankan program Net Citizen Journalism (Net CJ. Penggunaan berbagai platform media dikenal dengan istilah multiplatform dan secara teoritis dikenal dengan istilah konvergensi. Konvergensi yaitu saat meleburnya domain-domain dalam berbagai media komunikasi. Artikel ini menggunakan metode studi kasus untuk melihat bagaimana konvergensi terjadi dalam proses pengelolaan program Net CJ. Teknik pengumpulan data adalah dengan wawancara mendalam, observasi dan studi dokumen. Wawancara mendalam dilakukan dari tiga sudut pandang yaitu dari pengelola program, pengguna/audience dan pengamat media. Penelitian ini menemukan bahwa dengan menggunakan berbagai platform media yang fungsinya berbeda, memiliki satu tujuan yang sama yaitu untuk menjalankan program Net CJ. Adapun berbagai platform dalam proses produksi program yaitu tayangan TV konvensional, streaming TV, website, aplikasi Net CJ, facebook, twitter, instagram dan path. Konvergensi media dijalankan dalam dua proses, yaitu proses produksi dan proses promosi program berita.

  9. Net Neutrality: Media Discourses and Public Perception

    Directory of Open Access Journals (Sweden)

    Christine Quail

    2010-01-01

    Full Text Available This paper analyzes media and public discourses surrounding net neutrality, with particular attention to public utility philosophy, from a critical perspective. The article suggests that further public education about net neutrality would be beneficial. The first portion of this paper provides a survey of the existing literature surrounding net neutrality, highlighting the contentious debate between market-based and public interest perspectives. In order to contextualize the debate, an overview of public utility philosophy is provided, shedding light on how the Internet can be conceptualized as a public good. Following this discussion, an analysis of mainstream media is presented, exploring how the media represents the issue of net neutrality and whether or not the Internet is discussed through the lens of public utility. To further examine how the net neutrality debate is being addressed, and to see the potential impacts of media discourses on the general public, the results of a focus group are reported and analyzed. Finally, a discussion assesses the implications of the net neutrality debate as presented through media discourses, highlighting the future of net neutrality as an important policy issue.

  10. Approximation methods for stochastic petri nets

    Science.gov (United States)

    Jungnitz, Hauke Joerg

    1992-01-01

    Stochastic Marked Graphs are a concurrent decision free formalism provided with a powerful synchronization mechanism generalizing conventional Fork Join Queueing Networks. In some particular cases the analysis of the throughput can be done analytically. Otherwise the analysis suffers from the classical state explosion problem. Embedded in the divide and conquer paradigm, approximation techniques are introduced for the analysis of stochastic marked graphs and Macroplace/Macrotransition-nets (MPMT-nets), a new subclass introduced herein. MPMT-nets are a subclass of Petri nets that allow limited choice, concurrency and sharing of resources. The modeling power of MPMT is much larger than that of marked graphs, e.g., MPMT-nets can model manufacturing flow lines with unreliable machines and dataflow graphs where choice and synchronization occur. The basic idea leads to the notion of a cut to split the original net system into two subnets. The cuts lead to two aggregated net systems where one of the subnets is reduced to a single transition. A further reduction leads to a basic skeleton. The generalization of the idea leads to multiple cuts, where single cuts can be applied recursively leading to a hierarchical decomposition. Based on the decomposition, a response time approximation technique for the performance analysis is introduced. Also, delay equivalence, which has previously been introduced in the context of marked graphs by Woodside et al., Marie's method and flow equivalent aggregation are applied to the aggregated net systems. The experimental results show that response time approximation converges quickly and shows reasonable accuracy in most cases. The convergence of Marie's method and flow equivalent aggregation are applied to the aggregated net systems. The experimental results show that response time approximation converges quickly and shows reasonable accuracy in most cases. The convergence of Marie's is slower, but the accuracy is generally better. Delay

  11. Visual Studio 2010 and NET 4 Six-in-One

    CERN Document Server

    Novak, Istvan; Granicz, Adam

    2010-01-01

    Complete coverage of all key .NET 4 and Visual Studio 2010 languages and technologies. .NET 4 is Microsoft's latest version of their core programming platform, and Visual Studio 2010 is the toolset that helps write .NET 4 applications. This comprehensive resource offers one-stop shopping for all you need to know to get productive with .NET 4. Experienced author and .NET guru Mitchel Sellers reviews all the important new features of .NET 4, including .NET charting and ASP.NET charting, ASP.NET dynamic data and jQuery, and the addition of F# as a supported package language. The expansive coverag

  12. Bed net related burns at Mulago national referral hospital, Uganda: a case series report.

    Science.gov (United States)

    Kalanzi, Edris W; O'Hara, Lyndsay M; O'Hara, Nathan N; Boyle, James C

    2014-05-01

    Insecticide-treated bed nets are essential tools to prevent malaria in endemic regions, however, increasing trends in bed net related burns in Kampala, Uganda are concerning. Data were collected from burns unit admission records at Mulago National Referral Hospital in Kampala, Uganda for the years 2008-2011 inclusive. Retrospective analyses on the characteristics of patients admitted with bed net related burns within this period were conducted. A total of 45 patients were admitted to the burns unit with bed net related burns during the study period. Most burns occurred among individuals who were 0-1 years old (33.3%) and 26-35 years old (24.2%) and the majority were male (71%). Bed net related burns at Mulago Hospital are severe, as evidenced by the fact that 15 of 45 patients died (crude mortality rate=33%) and that 26 patients (57.8%) had total body surface area burn percentages that were greater than 20%. The average length of stay in hospital for patients with bed net related burns was 30.4 days. Organizations responsible for malaria prevention should consider incorporating fire and burn prevention awareness, strategies and training into their bed net distribution programs. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

  13. Application and Theory of Petri Nets

    DEFF Research Database (Denmark)

    , the conferences have 150-200 participants, one third of these coming from industry and the rest from universities and research institutions. The 1992 conference was organized by the School of Computing and Management Sciences at Sheffield City Polytechnic, England. The volume contains twoinvited papers, by G......This volume contains the proceedings of the 13th International Conference onApplication and Theory of Petri Nets, held in Sheffield, England, in June 1992. The aim of the Petri net conferences is to create a forum for discussing progress in the application and theory of Petri nets. Typically...

  14. Performance Analysis using Coloured Petri Nets

    DEFF Research Database (Denmark)

    Wells, Lisa Marie

    an explicit separation between modelling the behaviour of a system and monitoring the behaviour of the model. As a result, cleaner and more understandable models can be created. The third paper presents a novel method for adding auxiliary information to coloured Petri net models. Coloured Petri nets models...... in a very limited and predictable manner, and it is easy to enable and disable the auxiliary information. The fourth paper is a case study in which the performance of a web server was analysed using coloured Petri nets. This case study has shown that it is relatively easy to analyse the performance...

  15. The KM3NeT project

    Energy Technology Data Exchange (ETDEWEB)

    Katz, U.F., E-mail: katz@physik.uni-erlangen.d [Erlangen Centre for Astroparticle Physics (ECAP), University of Erlangen-Nuernberg, Erwin-Rommel-Str. 1, 91058 Erlangen (Germany)

    2011-01-21

    The KM3NeT research infrastructure in the deep Mediterranean Sea will host a multi-cubic-kilometre neutrino telescope and provide connectivity for continuous, long-term measurements of earth and sea sciences, such as geology, marine biology and oceanography. The KM3NeT neutrino telescope will complement the IceCube telescope currently being installed at the South Pole in its field of view and surpass its sensitivity by a substantial factor. In this document the major aspects of the KM3NeT technical design are described and the expected physics sensitivity is discussed. Finally, the expected time line towards construction is presented.

  16. The net neutrality debate on Twitter

    Directory of Open Access Journals (Sweden)

    Wolf J. Schünemann

    2015-12-01

    Full Text Available The internet has been seen as a medium that empowers individual political actors in relation to established political elites and media gatekeepers. The present article discusses this “net empowerment hypothesis” and tests it empirically by analysing Twitter communication on the regulation of net neutrality. We extracted 503.839 tweets containing #NetNeutrality posted between January and March 2015 and analysed central developments and the network structure of the debate. The empirical results show that traditional actors from media and politics still maintain a central role.

  17. In vivo recording of aerodynamic force with an aerodynamic force platform

    CERN Document Server

    Lentink, David; Ingersoll, Rivers

    2014-01-01

    Flapping wings enable flying animals and biomimetic robots to generate elevated aerodynamic forces. Measurements that demonstrate this capability are based on tethered experiments with robots and animals, and indirect force calculations based on measured kinematics or airflow during free flight. Remarkably, there exists no method to measure these forces directly during free flight. Such in vivo recordings in freely behaving animals are essential to better understand the precise aerodynamic function of their flapping wings, in particular during the downstroke versus upstroke. Here we demonstrate a new aerodynamic force platform (AFP) for nonintrusive aerodynamic force measurement in freely flying animals and robots. The platform encloses the animal or object that generates fluid force with a physical control surface, which mechanically integrates the net aerodynamic force that is transferred to the earth. Using a straightforward analytical solution of the Navier-Stokes equation, we verified that the method is ...

  18. Foreign Body

    Science.gov (United States)

    ... SearchingPediatrics.com Pediatrics Common Questions, Quick Answers Foreign Body Donna D'Alessandro, M.D. Lindsay Huth, B. ... I call the doctor? What is a foreign body? A foreign body is when an object is ...

  19. Planning long lasting insecticide treated net campaigns: should households' existing nets be taken into account?

    Science.gov (United States)

    Yukich, Joshua; Bennett, Adam; Keating, Joseph; Yukich, Rudy K; Lynch, Matt; Eisele, Thomas P; Kolaczinski, Kate

    2013-06-14

    Mass distribution of long-lasting insecticide treated bed nets (LLINs) has led to large increases in LLIN coverage in many African countries. As LLIN ownership levels increase, planners of future mass distributions face the challenge of deciding whether to ignore the nets already owned by households or to take these into account and attempt to target individuals or households without nets. Taking existing nets into account would reduce commodity costs but require more sophisticated, and potentially more costly, distribution procedures. The decision may also have implications for the average age of nets in use and therefore on the maintenance of universal LLIN coverage over time. A stochastic simulation model based on the NetCALC algorithm was used to determine the scenarios under which it would be cost saving to take existing nets into account, and the potential effects of doing so on the age profile of LLINs owned. The model accounted for variability in timing of distributions, concomitant use of continuous distribution systems, population growth, sampling error in pre-campaign coverage surveys, variable net 'decay' parameters and other factors including the feasibility and accuracy of identifying existing nets in the field. Results indicate that (i) where pre-campaign coverage is around 40% (of households owning at least 1 LLIN), accounting for existing nets in the campaign will have little effect on the mean age of the net population and (ii) even at pre-campaign coverage levels above 40%, an approach that reduces LLIN distribution requirements by taking existing nets into account may have only a small chance of being cost-saving overall, depending largely on the feasibility of identifying nets in the field. Based on existing literature the epidemiological implications of such a strategy is likely to vary by transmission setting, and the risks of leaving older nets in the field when accounting for existing nets must be considered. Where pre-campaign coverage

  20. Planning long lasting insecticide treated net campaigns: should households’ existing nets be taken into account?

    Science.gov (United States)

    2013-01-01

    Background Mass distribution of long-lasting insecticide treated bed nets (LLINs) has led to large increases in LLIN coverage in many African countries. As LLIN ownership levels increase, planners of future mass distributions face the challenge of deciding whether to ignore the nets already owned by households or to take these into account and attempt to target individuals or households without nets. Taking existing nets into account would reduce commodity costs but require more sophisticated, and potentially more costly, distribution procedures. The decision may also have implications for the average age of nets in use and therefore on the maintenance of universal LLIN coverage over time. Methods A stochastic simulation model based on the NetCALC algorithm was used to determine the scenarios under which it would be cost saving to take existing nets into account, and the potential effects of doing so on the age profile of LLINs owned. The model accounted for variability in timing of distributions, concomitant use of continuous distribution systems, population growth, sampling error in pre-campaign coverage surveys, variable net ‘decay’ parameters and other factors including the feasibility and accuracy of identifying existing nets in the field. Results Results indicate that (i) where pre-campaign coverage is around 40% (of households owning at least 1 LLIN), accounting for existing nets in the campaign will have little effect on the mean age of the net population and (ii) even at pre-campaign coverage levels above 40%, an approach that reduces LLIN distribution requirements by taking existing nets into account may have only a small chance of being cost-saving overall, depending largely on the feasibility of identifying nets in the field. Based on existing literature the epidemiological implications of such a strategy is likely to vary by transmission setting, and the risks of leaving older nets in the field when accounting for existing nets must be considered

  1. RadNet Air Quality (Deployable) Data

    Data.gov (United States)

    U.S. Environmental Protection Agency — RadNet Deployable Monitoring is designed to collect radiological and meteorological information and data asset needed to establish the impact of radiation levels on...

  2. A Lightweight TwiddleNet Portal

    National Research Council Canada - National Science Library

    Rimikis, Antonios M

    2008-01-01

    TwiddleNet is a distributed architecture of personal servers that harnesses the power of the mobile devices, enabling real time information and file sharing of multiple data types from commercial-off-the-shelf platforms...

  3. Homology Groups of a Pipeline Petri Net

    Directory of Open Access Journals (Sweden)

    A. A. Husainov

    2013-01-01

    Full Text Available Petri net is said to be elementary if every place can contain no more than one token. In this paper, it is studied topological properties of the elementary Petri net for a pipeline consisting of n functional devices. If the work of the functional devices is considered continuous, we can come to some topological space of “intermediate” states. In the paper, it is calculated the homology groups of this topological space. By induction on n, using the Addition Sequence for homology groups of semicubical sets, it is proved that in dimension 0 and 1 the integer homology groups of these nets are equal to the group of integers, and in the remaining dimensions are zero. Directed homology groups are studied. A connection of these groups with deadlocks and newsletters is found. This helps to prove that all directed homology groups of the pipeline elementary Petri nets are zeroth.

  4. Net accumulation of the Greenland ice sheet

    DEFF Research Database (Denmark)

    Kiilsholm, Sissi; Christensen, Jens Hesselbjerg; Dethloff, Klaus

    2003-01-01

    improvement compared to the driving OAGCM. Estimates of the regional net balance are also better represented by the RCM. In the future climate the net balance for the Greenland Ice Sheet is reduced in all the simulation, but discrepancies between the amounts when based on ECHAM4/OPYC3 and HIRHAM are found....... In both scenarios, the estimated melt rates are larger in HIRHAM than in the driving model....

  5. CDMA and TDMA based neural nets.

    Science.gov (United States)

    Herrero, J C

    2001-06-01

    CDMA and TDMA telecommunication techniques were established long time ago, but they have acquired a renewed presence due to the rapidly increasing mobile phones demand. In this paper, we are going to see they are suitable for neural nets, if we leave the concept "connection" between processing units and we adopt the concept "messages" exchanged between them. This may open the door to neural nets with a higher number of processing units and flexible configuration.

  6. Mastering AngularJD for .NET developers

    CERN Document Server

    Majid, Mohammad Wadood

    2015-01-01

    This book is envisioned for traditional developers and programmers who want to develop client-side applications using the AngularJS framework and ASP.NET Web API 2 with Visual Studio. .NET developers who have already built web applications or web services and who have a fundamental knowledge of HTML, JavaScript, and CSS and want to explore single-page applications will also find this guide useful. Basic knowledge of AngularJS would be helpful.

  7. .NET 4.5 parallel extensions

    CERN Document Server

    Freeman, Bryan

    2013-01-01

    This book contains practical recipes on everything you will need to create task-based parallel programs using C#, .NET 4.5, and Visual Studio. The book is packed with illustrated code examples to create scalable programs.This book is intended to help experienced C# developers write applications that leverage the power of modern multicore processors. It provides the necessary knowledge for an experienced C# developer to work with .NET parallelism APIs. Previous experience of writing multithreaded applications is not necessary.

  8. A Lightweight TwiddleNet Portal

    Science.gov (United States)

    2008-03-01

    designed to exploit the multiple networking modalities available in the current generation of smartphones . TwiddleNet enables well-organized and well...of Sonopia and will have a comprehensive review of the service in the coming weeks [12]. Twango, which was acquired by Nokia in July 2007, is an...EXPERIMENTATION As already mentioned the main purpose of this thesis is the development of a TwiddleNet portal running on a smartphone or a PDA, which can allow

  9. CCS - and its relationship to net theory

    DEFF Research Database (Denmark)

    Nielsen, Mogens

    1987-01-01

    In this paper we give a short introduction to Milner's Calculus for Communicating Systems - a paradigm for concurrent computation. We put special emphasis on the basic concepts and tools from the underlying "algebraic approach", and their relationship to the approach to concurrency within net...... theory. Furthermore, we provide an operational version of the language CCS with "true concurrency" in the sense of net theory, and a discussion of the possible use of such a marriage of the two theories of concurrency....

  10. Visual Studio 2013 and .NET 4.5 expert cookbook

    CERN Document Server

    Sur, Abhishek

    2014-01-01

    If you are a Visual Studio 2013 or .NET developer who would like to sharpen your existing skill set and adapt to new .NET technologies, this is the book for you. A basic understanding of .NET and C# is required.

  11. HANPP Collection: Global Patterns in Net Primary Productivity (NPP)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Global Patterns in Net Primary Productivity (NPP) portion of the Human Appropriation of Net Primary Productivity (HANPP) Collection maps the net amount of solar...

  12. Penggunaan Light Emitting Diode Pada Lampu Celup Bagan (the Use of Light Emitting Diode on Sunked Lamps of Lift Net)

    OpenAIRE

    Thenu, Imanuel M; Puspito, Gondo; Martasuganda, Sulaeman

    2013-01-01

    Lift net fishermen usually use fluorescent lamp as attractor to lure fish. As price of fuel rise, fishermen are forced to find another option to change their attractor into some much lower cost and more energy-save lamp, or in other words, to change into LED lamp. This research are providing evidence that sunked LED lamps can be utilized as a helper tools, and also determined the best time for catching fish in the lift net. Two lift net used in this research, one of them used sunked LED lamps...

  13. Attribution of Historical Whole-atmosphere Ozone Forcing to Emissions

    Science.gov (United States)

    Shindell, Drew; Faluvegi, Greg; Nazarenko, Larissa; Bowman, Kevin; Lamarque, Jean--Francois; Voulgarakis, Apostolos; Schmidt, Gavin A.; Pechony, Olga; Ruedy, Reto

    2013-01-01

    Anthropogenic ozone radiative forcing is traditionally separately attributed to tropospheric and stratospheric changes assuming these have distinct causes. Using the interactive composition-climate model GISS-E2-R we find that this assumption is not justified. Our simulations show that changes in emissions of tropospheric ozone precursors have substantial effects on ozone in both regions, as do anthropogenic halocarbon emissions. Based on our results, additional simulations with the NCARCAM3.5 model, and published studies, we estimate industrial era (1850 to 2005) whole-atmosphere ozone forcing of 0.5 W/sq m due to anthropogenic tropospheric precursors and about -0.2 W/sq m due to halocarbons. The net troposphere plus stratosphere forcing is similar to the net halocarbon plus precursor ozone forcing, but the latter provides a more useful perspective. The halocarbon-induced ozone forcing is roughly two-thirds the magnitude of the halocarbon direct forcing but opposite in sign, yielding a net forcing of only 0.1 W/sq m. Thus the net effect of halocarbons has been smaller, while the effect of tropospheric ozone precursors has been greater, than generally recognized.

  14. Force balancing in mammographic compression

    Energy Technology Data Exchange (ETDEWEB)

    Branderhorst, W., E-mail: w.branderhorst@amc.nl; Groot, J. E. de; Lier, M. G. J. T. B. van; Grimbergen, C. A. [Department of Biomedical Engineering and Physics, Academic Medical Center, P.O. Box 22660, Amsterdam 1100 DD (Netherlands); Sigmascreening B.V., Meibergdreef 45, Amsterdam 1105 BA (Netherlands); Neeter, L. M. F. H.; Heeten, G. J. den [Department of Biomedical Engineering and Physics, Academic Medical Center, P.O. Box 22660, Amsterdam 1100 DD (Netherlands); Neeleman, C. [Sigmascreening B.V., Meibergdreef 45, Amsterdam 1105 BA (Netherlands)

    2016-01-15

    Purpose: In mammography, the height of the image receptor is adjusted to the patient before compressing the breast. An inadequate height setting can result in an imbalance between the forces applied by the image receptor and the paddle, causing the clamped breast to be pushed up or down relative to the body during compression. This leads to unnecessary stretching of the skin and other tissues around the breast, which can make the imaging procedure more painful for the patient. The goal of this study was to implement a method to measure and minimize the force imbalance, and to assess its feasibility as an objective and reproducible method of setting the image receptor height. Methods: A trial was conducted consisting of 13 craniocaudal mammographic compressions on a silicone breast phantom, each with the image receptor positioned at a different height. The image receptor height was varied over a range of 12 cm. In each compression, the force exerted by the compression paddle was increased up to 140 N in steps of 10 N. In addition to the paddle force, the authors measured the force exerted by the image receptor and the reaction force exerted on the patient body by the ground. The trial was repeated 8 times, with the phantom remounted at a slightly different orientation and position between the trials. Results: For a given paddle force, the obtained results showed that there is always exactly one image receptor height that leads to a balance of the forces on the breast. For the breast phantom, deviating from this specific height increased the force imbalance by 9.4 ± 1.9 N/cm (6.7%) for 140 N paddle force, and by 7.1 ± 1.6 N/cm (17.8%) for 40 N paddle force. The results also show that in situations where the force exerted by the image receptor is not measured, the craniocaudal force imbalance can still be determined by positioning the patient on a weighing scale and observing the changes in displayed weight during the procedure. Conclusions: In mammographic breast

  15. Force balancing in mammographic compression.

    Science.gov (United States)

    Branderhorst, W; de Groot, J E; Neeter, L M F H; van Lier, M G J T B; Neeleman, C; den Heeten, G J; Grimbergen, C A

    2016-01-01

    In mammography, the height of the image receptor is adjusted to the patient before compressing the breast. An inadequate height setting can result in an imbalance between the forces applied by the image receptor and the paddle, causing the clamped breast to be pushed up or down relative to the body during compression. This leads to unnecessary stretching of the skin and other tissues around the breast, which can make the imaging procedure more painful for the patient. The goal of this study was to implement a method to measure and minimize the force imbalance, and to assess its feasibility as an objective and reproducible method of setting the image receptor height. A trial was conducted consisting of 13 craniocaudal mammographic compressions on a silicone breast phantom, each with the image receptor positioned at a different height. The image receptor height was varied over a range of 12 cm. In each compression, the force exerted by the compression paddle was increased up to 140 N in steps of 10 N. In addition to the paddle force, the authors measured the force exerted by the image receptor and the reaction force exerted on the patient body by the ground. The trial was repeated 8 times, with the phantom remounted at a slightly different orientation and position between the trials. For a given paddle force, the obtained results showed that there is always exactly one image receptor height that leads to a balance of the forces on the breast. For the breast phantom, deviating from this specific height increased the force imbalance by 9.4 ± 1.9 N/cm (6.7%) for 140 N paddle force, and by 7.1 ± 1.6 N/cm (17.8%) for 40 N paddle force. The results also show that in situations where the force exerted by the image receptor is not measured, the craniocaudal force imbalance can still be determined by positioning the patient on a weighing scale and observing the changes in displayed weight during the procedure. In mammographic breast compression, even small changes in the

  16. ASP.NET web API build RESTful web applications and services on the .NET framework

    CERN Document Server

    Kanjilal, Joydip

    2013-01-01

    This book is a step-by-step, practical tutorial with a simple approach to help you build RESTful web applications and services on the .NET framework quickly and efficiently.This book is for ASP.NET web developers who want to explore REST-based services with C# 5. This book contains many real-world code examples with explanations whenever necessary. Some experience with C# and ASP.NET 4 is expected.

  17. Freeze-out conditions from net-proton and net-charge fluctuations at RHIC

    Energy Technology Data Exchange (ETDEWEB)

    Alba, Paolo; Alberico, Wanda [Department of Physics, Torino University and INFN, Sezione di Torino, via P. Giuria 1, 10125 Torino (Italy); Bellwied, Rene [Department of Physics, University of Houston, Houston, TX 77204 (United States); Bluhm, Marcus [Department of Physics, Torino University and INFN, Sezione di Torino, via P. Giuria 1, 10125 Torino (Italy); Department of Physics, North Carolina State University, Raleigh, NC 27695 (United States); Mantovani Sarti, Valentina [Department of Physics, Torino University and INFN, Sezione di Torino, via P. Giuria 1, 10125 Torino (Italy); Nahrgang, Marlene [Department of Physics, Duke University, Durham, NC 27708-0305 (United States); Frankfurt Institute for Advanced Studies (FIAS), Ruth-Moufang-Str. 1, 60438 Frankfurt am Main (Germany); Ratti, Claudia [Department of Physics, Torino University and INFN, Sezione di Torino, via P. Giuria 1, 10125 Torino (Italy)

    2014-11-10

    We calculate ratios of higher-order susceptibilities quantifying fluctuations in the number of net-protons and in the net-electric charge using the Hadron Resonance Gas (HRG) model. We take into account the effect of resonance decays, the kinematic acceptance cuts in rapidity, pseudo-rapidity and transverse momentum used in the experimental analysis, as well as a randomization of the isospin of nucleons in the hadronic phase. By comparing these results to the latest experimental data from the STAR Collaboration, we determine the freeze-out conditions from net-electric charge and net-proton distributions and discuss their consistency.

  18. Resource Letter VWCPF-1: Van der Waals and Casimir-Polder forces

    OpenAIRE

    Milton, Kimball A.

    2011-01-01

    This Resource Letter provides a guide to the literature on van der Waals and Casimir-Polder forces. Journal articles, books, and other documents are cited on the following topics: van der Waals forces, retarded dispersion forces or Casimir-Polder forces between atoms or molecules, Casimir-Polder forces between a molecule and a dielectric or conducting body, the summation of Casimir-Polder forces as leading to the Casimir and Lifshitz forces between conducting and dielectric bodies, Casimir fr...

  19. Piezoelectric Low Net Passive Stiffness (LNPS) flutter test vane

    Science.gov (United States)

    Barnhart, Ryan; Barrett, Ronald M.

    2012-04-01

    This paper outlines the design, fabrication and testing of a new, high performance piezoelectrically driven aircraft flutter test vane. This flutter test vane utilizes low-net passive stiffness (LNPS) actuator configurations to produce deflection amplification ratios on the order of 5:1 while maintaining full blocked moment generation capability. With an order of magnitude lower weight than conventional vanes, the LNPS flight flutter test vane is capable of producing larger amplitude structural deflections with smaller force levels because vane forcing waveforms, frequencies and phasing can be very exactingly controlled with respect to each other. The paper covers the fundamental driving theories behind the device, actuator geometry, test article layout, fabrication and testing. This device was wind tunnel tested at airspeeds up to 110 ft/s with excellent correlation between theory and experiment. Experimental tests show an improvement in angular deflection and delta lift forces from approximately +/-1.8 deg. and 0.45 lbf to +/-8.5 deg. and 1.45 lbf, respectively. The flutter test vane consumes only 1W of peak power at max. actuation frequency, drastically reducing the impact of electrical power supply lines on the modal mass of the wing. This paper describes the modeling, testing and evaluation of the adaptive flutter test vane and quantifies the implications on the current state of flight flutter testing.

  20. Full body restraint system

    Science.gov (United States)

    Ryder, Susan (Inventor)

    1990-01-01

    A body restraint system (30) allows the user's body (10) to be in the zero gravity neutral posture. The system (30) includes a waist restraint (32) in the form of a curved, padded unit (34) containing a retractable belt (36) coiled on a spring loaded capstan (38) with a buckle (40) extending from front (42) of the unit (34). A second belt (44) is fastened around the user's waist (16). A clasp (46) is configured to engage the buckle (40). The waist restraint (32) is positioned near foot restraints (52). The foot restraints (52) have foot platforms (59) with pads (60) of a suitable two part attaching material, such as the fasteners available from Minnesota Mining and Manufacturing Company under the trademark Scotchmate Duallock. A mating pad (62) of the material is provided on soles (64) of cotton net shoes (66).

  1. Modest net autotrophy in the oligotrophic ocean

    Science.gov (United States)

    Letscher, Robert T.; Moore, J. Keith

    2017-04-01

    The metabolic state of the oligotrophic subtropical ocean has long been debated. Net community production (NCP) represents the balance of autotrophic carbon fixation with heterotrophic respiration. Many in vitro NCP estimates based on oxygen incubation methods and the corresponding scaling relationships used to predict the ecosystem metabolic balance have suggested the ocean gyres to be net heterotrophic; however, all in situ NCP methods find net autotrophy. Reconciling net heterotrophy requires significant allochthonous inputs of organic carbon to the oligotrophic gyres to sustain a preponderance of respiration over in situ production. Here we use the first global ecosystem-ocean circulation model that contains representation of the three allochthonous carbon sources to the open ocean, to show that the five oligotrophic gyres exhibit modest net autotrophy throughout the seasonal cycle. Annually integrated rates of NCP vary in the range 1.5-2.2 mol O2 m-2 yr-1 across the five gyre systems; however, seasonal NCP rates are as low as 1 ± 0.5 mmol O2 m-2 d-1 for the North Atlantic. Volumetric NCP rates are heterotrophic below the 10% light level; however, they become net autotrophic when integrated over the euphotic zone. Observational uncertainties when measuring these modest autotrophic NCP rates as well as the metabolic diversity encountered across space and time complicate the scaling up of in vitro measurements to the ecosystem scale and may partially explain the previous reports of net heterotrophy. The oligotrophic ocean is autotrophic at present; however, it could shift toward seasonal heterotrophy in the future as rising temperatures stimulate respiration.

  2. Evaluating Upper-Body Strength and Power From a Single Test: The Ballistic Push-up.

    Science.gov (United States)

    Wang, Ran; Hoffman, Jay R; Sadres, Eliahu; Bartolomei, Sandro; Muddle, Tyler W D; Fukuda, David H; Stout, Jeffrey R

    2017-05-01

    Wang, R, Hoffman, JR, Sadres, E, Bartolomei, S, Muddle, TWD, Fukuda, DH, and Stout, JR. Evaluating upper-body strength and power from a single test: the ballistic push-up. J Strength Cond Res 31(5): 1338-1345, 2017-The purpose of this study was to examine the reliability of the ballistic push-up (BPU) exercise and to develop a prediction model for both maximal strength (1 repetition maximum [1RM]) in the bench press exercise and upper-body power. Sixty recreationally active men completed a 1RM bench press and 2 BPU assessments in 3 separate testing sessions. Peak and mean force, peak and mean rate of force development, net impulse, peak velocity, flight time, and peak and mean power were determined. Intraclass correlation coefficients were used to examine the reliability of the BPU. Stepwise linear regression was used to develop 1RM bench press and power prediction equations. Intraclass correlation coefficient's ranged from 0.849 to 0.971 for the BPU measurements. Multiple regression analysis provided the following 1RM bench press prediction equation: 1RM = 0.31 × Mean Force - 1.64 × Body Mass + 0.70 (R = 0.837, standard error of the estimate [SEE] = 11 kg); time-based power prediction equation: Peak Power = 11.0 × Body Mass + 2012.3 × Flight Time - 338.0 (R = 0.658, SEE = 150 W), Mean Power = 6.7 × Body Mass + 1004.4 × Flight Time - 224.6 (R = 0.664, SEE = 82 W); and velocity-based power prediction equation: Peak Power = 8.1 × Body Mass + 818.6 × Peak Velocity - 762.0 (R = 0.797, SEE = 115 W); Mean Power = 5.2 × Body Mass + 435.9 × Peak Velocity - 467.7 (R = 0.838, SEE = 57 W). The BPU is a reliable test for both upper-body strength and power. Results indicate that the mean force generated from the BPU can be used to predict 1RM bench press, whereas peak velocity and flight time measured during the BPU can be used to predict upper-body power. These findings support the potential use of the BPU as a valid method to evaluate upper-body strength and power.

  3. SOCIAL NET: A CASE STUDY OF THE UNIVERSITY NET OF POPULAR COOPERATIVES TECHNOLOGICAL INCUBATORS (PCTIS NET FROM THE INTERACTION AMONG THE INCUBATORS

    Directory of Open Access Journals (Sweden)

    Marília Matos Pereira Lopes

    2014-07-01

    Full Text Available The objective of this assignment was to identify if the University Net of Popular Cooperatives Technological Incubators (PCTIs Net is a social net. The research was an exploratory nature study with descriptive character, the technical procedure of the present research was the case study. The questionnaire was applied in 82% of the incubators belonging to the PCTIs Net, and interviews. The information acquired through the questionnaire was gathered and tabulated to compose the characterization of the net incubators and the social analyzer. With the Pajek program was created the social analyzer and the centralizing box. Was performed to compare the results with previous work Rennó et al. (2010 proposed that the same goal using a different approach. Ending the analysis guided by the characteristics of a social net, it was observed that the PCTIs Net is a social net, however it was emphasized that the existing communication is a point where the net needs to be fortified.

  4. Activation of PAD4 in NET formation

    Directory of Open Access Journals (Sweden)

    Amanda eRohrbach

    2012-11-01

    Full Text Available Peptidyl arginine deiminases, or PADs, convert arginine residues to the non-ribosomally encoded amino acid citrulline in a variety of protein substrates. PAD4 is expressed in granulocytes and is essential for the formation of neutrophil extracellular traps (NETs via PAD4-mediated histone citrullination. Citrullination of histones is thought to promote NET formation by inducing chromatin decondensation and facilitating the expulsion of chromosomal DNA that is coated with antimicrobial molecules. Numerous stimuli have been reported to lead to PAD4 activation and NET formation. However, how this signaling process proceeds and how PAD4 becomes activated in cells is largely unknown. Herein, we describe the various stimuli and signaling pathways that have been implicated in PAD4 activation and NET formation, including the role of reactive oxygen species generation. To provide a foundation for the above discussion, we first describe PAD4 structure and function, and how these studies led to the development of PAD-specific inhibitors. A comprehensive survey of the receptors and signaling pathways that regulate PAD4 activation will be important for our understanding of innate immunity, and the identification of signaling intermediates in PAD4 activation may also lead to the generation of pharmaceuticals to target NET-related pathogenesis.

  5. The net charge at interfaces between insulators

    Science.gov (United States)

    Bristowe, N. C.; Littlewood, P. B.; Artacho, Emilio

    2011-03-01

    The issue of the net charge at insulating oxide interfaces is briefly reviewed with the ambition of dispelling myths of such charges being affected by covalency and related charge density effects. For electrostatic analysis purposes, the net charge at such interfaces is defined by the counting of discrete electrons and core ion charges, and by the definition of the reference polarization of the separate, unperturbed bulk materials. The arguments are illustrated for the case of a thin film of LaAlO3 over SrTiO3 in the absence of free carriers, for which the net charge is exactly 0.5e per interface formula unit, if the polarization response in both materials is referred to zero bulk values. Further consequences of the argument are extracted for structural and chemical alterations of such interfaces, in which internal rearrangements are distinguished from extrinsic alterations (changes of stoichiometry, redox processes), only the latter affecting the interfacial net charge. The arguments are reviewed alongside the proposal of Stengel and Vanderbilt (2009 Phys. Rev. B 80 241103) of using formal polarization values instead of net interfacial charges, based on the interface theorem of Vanderbilt and King-Smith (1993 Phys. Rev. B 48 4442-55). Implications for non-centrosymmetric materials are discussed, as well as for interfaces for which the charge mismatch is an integer number of polarization quanta.

  6. Automating Ontological Annotation with WordNet

    Energy Technology Data Exchange (ETDEWEB)

    Sanfilippo, Antonio P.; Tratz, Stephen C.; Gregory, Michelle L.; Chappell, Alan R.; Whitney, Paul D.; Posse, Christian; Paulson, Patrick R.; Baddeley, Bob L.; Hohimer, Ryan E.; White, Amanda M.

    2006-01-22

    Semantic Web applications require robust and accurate annotation tools that are capable of automating the assignment of ontological classes to words in naturally occurring text (ontological annotation). Most current ontologies do not include rich lexical databases and are therefore not easily integrated with word sense disambiguation algorithms that are needed to automate ontological annotation. WordNet provides a potentially ideal solution to this problem as it offers a highly structured lexical conceptual representation that has been extensively used to develop word sense disambiguation algorithms. However, WordNet has not been designed as an ontology, and while it can be easily turned into one, the result of doing this would present users with serious practical limitations due to the great number of concepts (synonym sets) it contains. Moreover, mapping WordNet to an existing ontology may be difficult and requires substantial labor. We propose to overcome these limitations by developing an analytical platform that (1) provides a WordNet-based ontology offering a manageable and yet comprehensive set of concept classes, (2) leverages the lexical richness of WordNet to give an extensive characterization of concept class in terms of lexical instances, and (3) integrates a class recognition algorithm that automates the assignment of concept classes to words in naturally occurring text. The ensuing framework makes available an ontological annotation platform that can be effectively integrated with intelligence analysis systems to facilitate evidence marshaling and sustain the creation and validation of inference models.

  7. Ontological Annotation with WordNet

    Energy Technology Data Exchange (ETDEWEB)

    Sanfilippo, Antonio P.; Tratz, Stephen C.; Gregory, Michelle L.; Chappell, Alan R.; Whitney, Paul D.; Posse, Christian; Paulson, Patrick R.; Baddeley, Bob; Hohimer, Ryan E.; White, Amanda M.

    2006-06-06

    Semantic Web applications require robust and accurate annotation tools that are capable of automating the assignment of ontological classes to words in naturally occurring text (ontological annotation). Most current ontologies do not include rich lexical databases and are therefore not easily integrated with word sense disambiguation algorithms that are needed to automate ontological annotation. WordNet provides a potentially ideal solution to this problem as it offers a highly structured lexical conceptual representation that has been extensively used to develop word sense disambiguation algorithms. However, WordNet has not been designed as an ontology, and while it can be easily turned into one, the result of doing this would present users with serious practical limitations due to the great number of concepts (synonym sets) it contains. Moreover, mapping WordNet to an existing ontology may be difficult and requires substantial labor. We propose to overcome these limitations by developing an analytical platform that (1) provides a WordNet-based ontology offering a manageable and yet comprehensive set of concept classes, (2) leverages the lexical richness of WordNet to give an extensive characterization of concept class in terms of lexical instances, and (3) integrates a class recognition algorithm that automates the assignment of concept classes to words in naturally occurring text. The ensuing framework makes available an ontological annotation platform that can be effectively integrated with intelligence analysis systems to facilitate evidence marshaling and sustain the creation and validation of inference models.

  8. Development of net cage acoustic alarm system

    Science.gov (United States)

    Hong, Shih-Wei; Wei, Ruey-Chang

    2004-05-01

    In recent years, the fishery production has been drastically decreased in Taiwan, mainly due to overfishing and coast pollution; therefore, fishermen and corporations are encouraged by government to invest in ocean net cage aquaculture. However, the high-price fishes in the net cage are often coveted, so incidences of fish stealing and net cage breaking were found occasionally, which cause great economical loss. Security guards or a visual monitoring system has limited effect, especially in the night when these intrusions occur. This study is based on acoustic measure to build a net cage alarm system, which includes the sonobuoy and monitor station on land. The sonobuoy is a passive sonar that collects the sounds near the net cage and transmits the suspected signal to the monitor station. The signals are analyzed by the control program on the personal computer in the monitor station, and the alarms at different stages could be activated by the sound levels and durations of the analyzed data. To insure long hours of surveillance, a solar panel is applied to charge the battery, and a photodetector is used to activate the system.

  9. The NeuroDevNet vision.

    Science.gov (United States)

    Goldowitz, Dan; McArthur, Dawn

    2011-03-01

    The NeuroDevNet Network of Centres of Excellence has created the first trans-Canada effort devoted to the study of brain development from basic to clinical to societal perspectives. NeuroDevNet's vision is to accelerate efforts to (i) understand normal brain development; (ii) enhance our ability to make diagnoses of when normal development goes awry; and (iii) develop interventions to improve or prevent neurodevelopmental disorders. An early diagnosis coupled with the right therapies, The NeuroDevNet Network of Centres of Excellence has created the first trans-Canada effort devoted to the study of brain development from basic to clinical to societal perspectives. NeuroDevNet's vision is to accelerate efforts to (i) understand normal brain development; (ii) enhance our ability to make diagnoses of when normal development goes awry; and (iii) develop interventions to improve or prevent neurodevelopmental disorders. An early diagnosis coupled with the right therapies, Demonstration Projects. Funds were also allocated for an Opportunities Initiative. There is a wide of expertise amongst NeuroDevNet members. Researchers are supported by the management centre, three Platforms (Imaging; Genetics/ Epigenetics; Animal Models) and three Cores (Neuroethics; Neuroinformatics; Knowledge Translation). We emphasize multidisciplinary training of young researchers to advance the understanding of brain disorders that affect children. Copyright © 2011 Elsevier Inc. All rights reserved.

  10. The net charge at interfaces between insulators

    Energy Technology Data Exchange (ETDEWEB)

    Bristowe, N C; Littlewood, P B [Theory of Condensed Matter Group, Cavendish Laboratory, University of Cambridge, J J Thomson Avenue, Cambridge CB3 0HE (United Kingdom); Artacho, Emilio, E-mail: ncb30@cam.ac.uk [Department of Earth Sciences, University of Cambridge, Downing Street, Cambridge CB2 3EQ (United Kingdom)

    2011-03-02

    The issue of the net charge at insulating oxide interfaces is briefly reviewed with the ambition of dispelling myths of such charges being affected by covalency and related charge density effects. For electrostatic analysis purposes, the net charge at such interfaces is defined by the counting of discrete electrons and core ion charges, and by the definition of the reference polarization of the separate, unperturbed bulk materials. The arguments are illustrated for the case of a thin film of LaAlO{sub 3} over SrTiO{sub 3} in the absence of free carriers, for which the net charge is exactly 0.5e per interface formula unit, if the polarization response in both materials is referred to zero bulk values. Further consequences of the argument are extracted for structural and chemical alterations of such interfaces, in which internal rearrangements are distinguished from extrinsic alterations (changes of stoichiometry, redox processes), only the latter affecting the interfacial net charge. The arguments are reviewed alongside the proposal of Stengel and Vanderbilt (2009 Phys. Rev. B 80 241103) of using formal polarization values instead of net interfacial charges, based on the interface theorem of Vanderbilt and King-Smith (1993 Phys. Rev. B 48 4442-55). Implications for non-centrosymmetric materials are discussed, as well as for interfaces for which the charge mismatch is an integer number of polarization quanta. (viewpoint)

  11. Automatic Structure-Based Code Generation from Coloured Petri Nets

    DEFF Research Database (Denmark)

    Kristensen, Lars Michael; Westergaard, Michael

    2010-01-01

    Automatic code generation based on Coloured Petri Net (CPN) models is challenging because CPNs allow for the construction of abstract models that intermix control flow and data processing, making translation into conventional programming constructs difficult. We introduce Process-Partitioned CPNs...... (PP-CPNs) which is a subclass of CPNs equipped with an explicit separation of process control flow, message passing, and access to shared and local data. We show how PP-CPNs caters for a four phase structure-based automatic code generation process directed by the control flow of processes....... The viability of our approach is demonstrated by applying it to automatically generate an Erlang implementation of the Dynamic MANET On-demand (DYMO) routing protocol specified by the Internet Engineering Task Force (IETF)....

  12. Histopathological Comparison of Mosquito Net with Polypropylene Mesh for Hernia Repair: An Experimental Study in Rats.

    Science.gov (United States)

    Sharma, Mukesh; Sharma, Deepti Bala; Chandrakar, Shiv Kumar; Sharma, Dhananjaya

    2015-12-01

    Use of mosquito net, in place of polypropylene mesh, had been reported for tension-free hernia repair, as a better cost-effective option. This experimental histopathological study was performed in rats to find out the tissue response and the foreign body reaction and its comparison between commercial polypropylene mesh and the sterilized mosquito net. This experimental study was conducted in the Department of Surgery, Government NSCB, Medical College, Jabalpur (Madhya Pradesh), India. It was carried out in 40 albino rats. A 1.5 × 0.5-cm hernial defect was created by excising full-thickness abdominal wall muscle. All rats underwent on-lay mesh repair of hernial defect (polypropylene mesh, n = 20; mosquito net, n = 20). Half of rats in each group were sacrificed on day 14, and the other half, on day 90. Sections of containing mesh were examined histopathologically for inflammatory infiltrate, giant cells, and collagen deposition. Mosquito net group showed significantly greater number of giant cells and inflammatory cells at 14 and 90 days (p days (p > 0.05 and p > 0.05, respectively). Results of mosquito net are comparable to conventional polypropylene mesh. In a setup, where cost-effectiveness is of primary importance, use of mosquito net for tension-free hernia repair can be an acceptable alternative as proven histologically, to commercially available polypropylene mesh.

  13. Association mapping utilizing diverse barley lines reveals net form net blotch seedling resistance/susceptibility loci

    Science.gov (United States)

    Pyrenophora teres f. teres is a necrotrophic fungal pathogen and the causal agent of the economically important foliar disease net form net blotch (NFNB) of barley. The deployment of effective and durable resistance against P. teres f. teres has been hindered by the complexity of quantitative resist...

  14. Net Zero Energy Military Installations: A Guide to Assessment and Planning

    Energy Technology Data Exchange (ETDEWEB)

    Booth, S.; Barnett, J.; Burman, K.; Hambrick, J.; Westby, R.

    2010-08-01

    The U.S. Department of Defense (DoD) recognizes the strategic importance of energy to its mission, and is working to reduce energy consumption and enhance energy self-sufficiency by drawing on local clean energy sources. A joint initiative formed between DoD and the U.S. Department of Energy (DOE) in 2008 to address military energy use led to a task force to examine the potential for net zero energy military installations, which would produce as much energy on site as they consume in buildings, facilities, and fleet vehicles. This report presents an assessment and planning process to examine military installations for net zero energy potential. Net Zero Energy Installation Assessment (NZEIA) presents a systematic framework to analyze energy projects at installations while balancing other site priorities such as mission, cost, and security.

  15. Use of the NetBeans Platform for NASA Robotic Conjunction Assessment Risk Analysis

    Science.gov (United States)

    Sabey, Nickolas J.

    2014-01-01

    The latest Java and JavaFX technologies are very attractive software platforms for customers involved in space mission operations such as those of NASA and the US Air Force. For NASA Robotic Conjunction Assessment Risk Analysis (CARA), the NetBeans platform provided an environment in which scalable software solutions could be developed quickly and efficiently. Both Java 8 and the NetBeans platform are in the process of simplifying CARA development in secure environments by providing a significant amount of capability in a single accredited package, where accreditation alone can account for 6-8 months for each library or software application. Capabilities either in use or being investigated by CARA include: 2D and 3D displays with JavaFX, parallelization with the new Streams API, and scalability through the NetBeans plugin architecture.

  16. Towards Self-Managed Executable Petri Nets

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius; Zhang, Weishan; Ingstrup, Mads

    2008-01-01

    An issue in self-managed systems is that different abstractions and programming models are used on different architectural layers, leading to systems that are harder to build and understand. To alleviate this, we introduce a self-management approach which combines high-level Petri nets...... with the capability of distributed communication among nets. Organized in a three-layer goal management, change management, and component control architecture this allows for self-management in distributed systems. We validate the approach through the Flamenco/CPN middleware that allows for self-management of service......-oriented pervasive computing systems through the runtime interpretation of colored Petri nets. The current work focuses on the change management and component control layers....

  17. Professional ASP.NET MVC 2

    CERN Document Server

    Galloway, Jon; Haack, Phil

    2010-01-01

    Top-selling MVC book from a top team at Microsoft—now fully updated!. ASP.NET MVC 2.0 is now available and shipping with Visual Studio 2010 and .NET 4. A new update to Microsoft's Model-View-Controller technologies, MVC 2.0 enables developers to build dynamic, data-driven Web sites. This in-depth book shows you step-by-step how to use MVC 2.0. You'll learn both the theory behind MVC 2.0, as well as walk through practical tutorials, where you'll create a real-world application. Topics include transitioning from ASP.NET development, as well as an overview of related tools and technologies, inclu

  18. .net core application lifecycle on Openshift

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    # .net core application lifecycle on Openshift I will show an example of a lifecycle of an OpenShift application with an emphasis on the continuous integration and deployment. The application compatible with [.net Standard](https://docs.microsoft.com/en-us/dotnet/standard/net-standard) can be easily deployed on OpenShift using [Source2Image](https://docs.openshift.com/enterprise/3.0/architecture/core_concepts/builds_and_image_streams.html#source-build) functionality, which doesn't require developers to maintain docker images of the application. I will also present how to efficiently integrate this feature into GitLab pipelines with an automated deployment of the "review" environment, as one its parts.

  19. Application and Theory of Petri Nets

    DEFF Research Database (Denmark)

    This volume contains the proceedings of the 13th International Conference onApplication and Theory of Petri Nets, held in Sheffield, England, in June 1992. The aim of the Petri net conferences is to create a forum for discussing progress in the application and theory of Petri nets. Typically......, the conferences have 150-200 participants, one third of these coming from industry and the rest from universities and research institutions. The 1992 conference was organized by the School of Computing and Management Sciences at Sheffield City Polytechnic, England. The volume contains twoinvited papers, by G....... Balbo and W. Reisig, 18 submitted papers, and seven project papers. The submitted papers and project presentations were selectedby the programme committee and a panel of referees from a large number of submissions....

  20. Chapter 17: Estimating Net Savings: Common Practices

    Energy Technology Data Exchange (ETDEWEB)

    Violette, D. M.; Rathbun, P.

    2014-09-01

    This chapter focuses on the methods used to estimate net energy savings in evaluation, measurement, and verification (EM&V) studies for energy efficiency (EE) programs. The chapter provides a definition of net savings, which remains an unsettled topic both within the EE evaluation community and across the broader public policy evaluation community, particularly in the context of attribution of savings to particular program. The chapter differs from the measure-specific Uniform Methods Project (UMP) chapters in both its approach and work product. Unlike other UMP resources that provide recommended protocols for determining gross energy savings, this chapter describes and compares the current industry practices for determining net energy savings, but does not prescribe particular methods.

  1. The transition from No Net Loss to a Net Gain of biodiversity is far from trivial

    DEFF Research Database (Denmark)

    Bull, Joseph William; Brownlie, S.

    2017-01-01

    The objectives of No Net Loss and Net Gain have emerged as key principles in conservation policy. Both give rise to mechanisms by which certain unavoidable biodiversity losses associated with development are quantified, and compensated with comparable gains (e.g. habitat restoration). The former...... seeks a neutral outcome for biodiversity after losses and gains are accounted for, and the latter seeks an improved outcome. Policy-makers often assume that the transition from one to the other is straightforward and essentially a question of the amount of compensation provided. Consequently, companies...... increasingly favour Net Gain type commitments, and financial institutions make lending conditional on either objective, depending on the habitat involved. We contend, however, that achieving Net Gain is fundamentally different to achieving No Net Loss, and moving from one to the other is less trivial than...

  2. Body Hygiene

    Science.gov (United States)

    ... type=”submit” value=”Submit” /> Healthy Water Home Body, Facial, & Dental Hygiene Recommend on Facebook Tweet Share ... hygiene and by frequently washing parts of the body and hair with soap and clean, running water ( ...

  3. APIs de seguridad en .NET Framework

    OpenAIRE

    Domínguez Ruiz, Abel

    2014-01-01

    Este trabajo hace un estudio de algunas de las herramientas de seguridad disponibles en .Net Framework así como la forma de usarlas en un desarrollo web bajo la metodología de desarrollo de ASP.NET siguiendo el modelo Vista-Controlador y usando como entorno de desarrollo Visual Studio. Además de repasar las herramientas disponibles y la forma de uso se ha desarrollado también una aplicación de ejemplo: ItemCoteca-Web; en la que se demuestra cómo resolver el registro de usuarios, la autenticac...

  4. An ECNO semantics for Petri nets

    DEFF Research Database (Denmark)

    Kindler, Ekkart

    2012-01-01

    The Event Coordination Notation (ECNO) allows modelling the behaviour of software on top of structural software models - and to generate program code from these models fully automatically. ECNO distinguishes between the local behaviour of elements (objects) and the global behaviour, which denes t...... work. In this paper, we will show that the ECNO, in turn, can be used for modelling the behaviour of Petri nets in a simple and concise way. What is more, we will show that the ECNO semantics of Place/Transition Systems can easily be extended to so-called signal-event nets....

  5. Introducing NET 40 With Visual Studio 2010

    CERN Document Server

    Mackey, A

    2010-01-01

    Microsoft is introducing a large number of changes to the way that the .NET Framework operates. Familiar technologies are being altered, best practices replaced, and developer methodologies adjusted. Many developers find it hard to keep up with the pace of change across .NET's ever-widening array of technologies. You may know what's happening in C#, but how about the Azure cloud? How is that going to affect your work? What are the limitations of the new pLINQ syntax? What you need is a roadmap. A guide to help you see the innovations that matter and to give you a head start on the opportunitie

  6. Deep Belief Nets for Topic Modeling

    DEFF Research Database (Denmark)

    Maaløe, Lars; Arngren, Morten; Winther, Ole

    2015-01-01

    -formative. In this paper we describe large-scale content based collaborative filtering for digital publishing. To solve the digital publishing recommender problem we compare two approaches: latent Dirichlet allocation (LDA) and deep be-lief nets (DBN) that both find low-dimensional latent representations for documents....... Efficient retrieval can be carried out in the latent representation. We work both on public benchmarks and digital media content provided by Issuu, an on-line publishing platform. This article also comes with a newly developed deep belief nets toolbox for topic modeling tailored towards performance...

  7. Performance Analysis Using Coloured Petri Nets

    DEFF Research Database (Denmark)

    Wells, Lisa Marie

    2002-01-01

    This paper provides an overview of improved facilities for performance analysis using coloured Petri nets. Coloured Petri nets is a formal method that is well suited for modeling and analyzing large and complex systems. The paper describes steps that have been taken to make a distinction between...... modeling the behavior of a system and observing the behavior of a model. Performance-related facilities are discussed, including facilities for collecting data, running multiple simulations, generating statistically reliable simulation output, and comparing alternative system configurations....

  8. Net Gain: A New Method for Preventing Malaria Deaths | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    A finely spun net could prevent as many as one-third of all child deaths in Africa, reports IDRC's new publication, Net Gain. Studies conducted in Gambia, Ghana, and Kenya show that the insecticide-treated mosquito net reduced the mortality rate of children under 5 years of age by up to 63 percent. Net Gain reviews and ...

  9. Body Alchemy

    OpenAIRE

    Zellweger, Christoph

    2015-01-01

    The exhibition "Body Alchemy" centers on the artistic concept of jewelry and metal art, new materials and the relation and dialogue between body and space. It discusses the evolution of contemporary jewelry and metal art from alchemy to casting body, from material aesthetics to conceptual art and from space shaping to body language. (subtracts from invite and event program). \\ud \\ud International contemporary jewelry artists and metal artists are invited to participate in the exhibition next ...

  10. Cluster forcing

    DEFF Research Database (Denmark)

    Christensen, Thomas Budde

    The cluster theory attributed to Michael Porter has significantly influenced industrial policies in countries across Europe and North America since the beginning of the 1990s. Institutions such as the EU, OECD and the World Bank and governments in countries such as the UK, France, The Netherlands......, Portugal and New Zealand have adopted the concept. Public sector interventions that aim to support cluster development in industries most often focus upon economic policy goals such as enhanced employment and improved productivity, but rarely emphasise broader societal policy goals relating to e.......g. sustainability or quality of life. The purpose of this paper is to explore how and to what extent public sector interventions that aim at forcing cluster development in industries can support sustainable development as defined in the Brundtland tradition and more recently elaborated in such concepts as eco-industrialism...

  11. Unified Selenocentric Reference Coordinates Net in the Dynamic System

    Science.gov (United States)

    Nefedyev, Yuri; Petrova, Natalia; Varaksina, Natalia

    In this report the task of the making selenocentric inertial reference net is solved. The purpose is making summary reference net by expansion KSC-1162 selenodetic system using 12 cosmic and ground selenodesic catalogues. The prospective analysis of this net was performed. These selenocentric reference catalogue covers full visible and a part of far lunar sides. Modern cosmic technologies need the accurate coordinate - temporal support including reference frame realization, inertial and dynamic system orientation and studying dynamic and geometry celestial bodies. That refers to dynamic and geometric selenocentric lunar parameters. The catalogue based on mission “Apollo” and reference nets of the west lunar hemisphere made by missions “Zond 5”, ”Zond 8” cover small part of the Moon surface. Three ALSEP stations were used to transform “Apollo” topographic coordinates. Transformation mean-square errors are less than 80 meters and measurement’s errors are about 60 meters. On this account positions inaccuracy near and between ALSEP stations are less 150 meters. The offset from place of the location ALSEP enlarges the supposed mistake is more than 300 m and this is a major part of the lunar surface. In solving the problem of high-precision condensation and expansion of fundamental selenocentric net KSC-1162 on the visible side of the Moon and lunar far side were obtained following new results: a) the analysis and investigation of the accuracy of basic net contained in ULCN were carried out; b) the decryption of common objects for coordinate systems which are being explored was executed; c) the extension of the mathematical content package TSC was carried out; d) the development of TSC as an expert system of universal transformation planet's coordinates was carried out; e) the possibility of applying the ARM-approach to the problem TC on common objects, which allows to find optimal parameter estimation and model structure of TC was confirmed; f) the

  12. About Body Inertness

    Directory of Open Access Journals (Sweden)

    Alexandr Izbreht

    2016-10-01

    Full Text Available The article investigates and further develops the Newton’s hypothesis about the origin of inertial forces. For this purpose the classic interpretation of light aberration phenomenon and the Lorentz — FitzGerald hypothesis — proposed to explain the negative result of the Michelson — Morley experiment — is used and a comparison is made between electromagnetic phenomena — particularly, self-induction and inertial force generated with a change in velocity of a moving physical body. The concepts not only prove that space has physical properties affecting the movement of bodies but that the latter also affect the physical properties of space. Formulas for the mechanics of high velocity and a further development of the Newton’s gravity law were derived based on these fundamental concepts. The findings are applied to cosmology and prove the stationary state of the ideally uniform and isotropic infinite Universe.

  13. Body Basics

    Science.gov (United States)

    ... Safe Videos for Educators Search English Español About Body Basics KidsHealth / For Parents / About Body Basics Print Remember the biology class you had ... do, lots of new knowledge about how the body works helps us to understand it now better ...

  14. Mars MetNet Mission Status

    Science.gov (United States)

    Harri, Ari-Matti; Aleksashkin, Sergei; Arruego, Ignacio; Schmidt, Walter; Genzer, Maria; Vazquez, Luis; Haukka, Harri

    2015-04-01

    New kind of planetary exploration mission for Mars is under development in collaboration between the Finnish Meteorological Institute (FMI), Lavochkin Association (LA), Space Research Institute (IKI) and Institutio Nacional de Tecnica Aerospacial (INTA). The Mars MetNet mission is based on a new semi-hard landing vehicle called MetNet Lander (MNL). The scientific payload of the Mars MetNet Precursor [1] mission is divided into three categories: Atmospheric instruments, Optical devices and Composition and structure devices. Each of the payload instruments will provide significant insights in to the Martian atmospheric behavior. The key technologies of the MetNet Lander have been qualified and the electrical qualification model (EQM) of the payload bay has been built and successfully tested. 1. MetNet Lander The MetNet landing vehicles are using an inflatable entry and descent system instead of rigid heat shields and parachutes as earlier semi-hard landing devices have used. This way the ratio of the payload mass to the overall mass is optimized. The landing impact will burrow the payload container into the Martian soil providing a more favorable thermal environment for the electronics and a suitable orientation of the telescopic boom with external sensors and the radio link antenna. It is planned to deploy several tens of MNLs on the Martian surface operating at least partly at the same time to allow meteorological network science. 2. Scientific Payload The payload of the two MNL precursor models includes the following instruments: Atmospheric instruments: 1. MetBaro Pressure device 2. MetHumi Humidity device 3. MetTemp Temperature sensors Optical devices: 1. PanCam Panoramic 2. MetSIS Solar irradiance sensor with OWLS optical wireless system for data transfer 3. DS Dust sensor The descent processes dynamic properties are monitored by a special 3-axis accelerometer combined with a 3-axis gyrometer. The data will be sent via auxiliary beacon antenna throughout the

  15. Markets, voucher subsidies and free nets combine to achieve high bed net coverage in rural Tanzania

    Directory of Open Access Journals (Sweden)

    Gerrets Rene PM

    2008-06-01

    Full Text Available Abstract Background Tanzania has a well-developed network of commercial ITN retailers. In 2004, the government introduced a voucher subsidy for pregnant women and, in mid 2005, helped distribute free nets to under-fives in small number of districts, including Rufiji on the southern coast, during a child health campaign. Contributions of these multiple insecticide-treated net delivery strategies existing at the same time and place to coverage in a poor rural community were assessed. Methods Cross-sectional household survey in 6,331 members of randomly selected 1,752 households of 31 rural villages of Demographic Surveillance System in Rufiji district, Southern Tanzania was conducted in 2006. A questionnaire was administered to every consenting respondent about net use, treatment status and delivery mechanism. Findings Net use was 62.7% overall, 87.2% amongst infants (0 to1 year, 81.8% amongst young children (>1 to 5 years, 54.5% amongst older children (6 to 15 years and 59.6% amongst adults (>15 years. 30.2% of all nets had been treated six months prior to interview. The biggest source of nets used by infants was purchase from the private sector with a voucher subsidy (41.8%. Half of nets used by young children (50.0% and over a third of those used by older children (37.2% were obtained free of charge through the vaccination campaign. The largest source of nets amongst the population overall was commercial purchase (45.1% use and was the primary means for protecting adults (60.2% use. All delivery mechanisms, especially sale of nets at full market price, under-served the poorest but no difference in equity was observed between voucher-subsidized and freely distributed nets. Conclusion All three delivery strategies enabled a poor rural community to achieve net coverage high enough to yield both personal and community level protection for the entire population. Each of them reached their relevant target group and free nets only temporarily

  16. Effect of dietary net energy concentrations on growth performance and net energy intake of growing gilts.

    Science.gov (United States)

    Lee, Gang Il; Kim, Jong Hyuk; Han, Gi Ppeum; Koo, Do Yoon; Choi, Hyeon Seok; Kil, Dong Yong

    2017-09-01

    This experiment investigated the effect of dietary net energy (NE) concentrations on growth performance and NE intake of growing gilts. Five diets were formulated to contain 9.6, 10.1, 10.6, 11.1, and 11.6 MJ NE/kg, respectively. A metabolism trial with 10 growing pigs (average body weight [BW] = 15.9±0.24 kg) was conducted to determine NE concentrations of 5 diets based on French and Dutch NE systems in a 5×5 replicated Latin square design. A growth trial also was performed with five dietary treatments and 12 replicates per treatment using 60 growing gilts (average BW = 15.9±0.55 kg) for 28 days. A regression analysis was performed to predict daily NE intake from the BW of growing gilts. Increasing NE concentrations of diets did not influence average daily gain and average daily feed intake of growing gilts. There was a quadratic relationship (p = 0.01) between dietary NE concentrations and feed efficiency (G:F), although the difference in G:F among treatment means was relatively small. Regression analysis revealed that daily NE intake was linearly associated with the BW of growing gilts. The prediction equations for NE intake with the BW of growing gilts were: NE intake (MJ/d) = 1.442+(0.562×BW, kg), R 2 = 0.796 when French NE system was used, whereas NE intake (MJ/d) = 1.533+(0.614×BW, kg), R 2 = 0.810 when Dutch NE system was used. Increasing NE concentrations of diets from 9.6 to 11.6 MJ NE/kg have little impacts on growth performance of growing gilts. Daily NE intake can be predicted from the BW between 15 and 40 kg in growing gilts.

  17. Proprioception is Robust under External Forces

    NARCIS (Netherlands)

    Kuling, I.A.; Brenner, E.; Smeets, J.B.J.

    2013-01-01

    Information from cutaneous, muscle and joint receptors is combined with efferent information to create a reliable percept of the configuration of our body (proprioception). We exposed the hand to several horizontal force fields to examine whether external forces influence this percept. In an

  18. Joint Force Quarterly. Number 1, Summer 1993

    Science.gov (United States)

    1993-01-01

    adrift in what had once been Austria-Hungary and the Ottoman Empire. Similarly, the defeat of the Axis powers in World War II un- leashed forces that...forcing doctors to concentrate on smaller and smaller parts of the human anatomy. The body, however, is a whole, and a pathology of the optic nerve, for

  19. Irrigation as an Historical Climate Forcing

    Science.gov (United States)

    Cook, Benjamin I.; Shukla, Sonali P.; Puma, Michael J.; Nazarenko, Larissa S.

    2014-01-01

    Irrigation is the single largest anthropogenic water use, a modification of the land surface that significantly affects surface energy budgets, the water cycle, and climate. Irrigation, however, is typically not included in standard historical general circulation model (GCM) simulations along with other anthropogenic and natural forcings. To investigate the importance of irrigation as an anthropogenic climate forcing, we conduct two 5-member ensemble GCM experiments. Both are setup identical to the historical forced (anthropogenic plus natural) scenario used in version 5 of the Coupled Model Intercomparison Project, but in one experiment we also add water to the land surface using a dataset of historically estimated irrigation rates. Irrigation has a negligible effect on the global average radiative balance at the top of the atmosphere, but causes significant cooling of global average surface air temperatures over land and dampens regional warming trends. This cooling is regionally focused and is especially strong in Western North America, the Mediterranean, the Middle East, and Asia. Irrigation enhances cloud cover and precipitation in these same regions, except for summer in parts of Monsoon Asia, where irrigation causes a reduction in monsoon season precipitation. Irrigation cools the surface, reducing upward fluxes of longwave radiation (increasing net longwave), and increases cloud cover, enhancing shortwave reflection (reducing net shortwave). The relative magnitude of these two processes causes regional increases (northern India) or decreases (Central Asia, China) in energy availability at the surface and top of the atmosphere. Despite these changes in net radiation, however, climate responses are due primarily to larger magnitude shifts in the Bowen ratio from sensible to latent heating. Irrigation impacts on temperature, precipitation, and other climate variables are regionally significant, even while other anthropogenic forcings (anthropogenic aerosols

  20. Validated simulator for space debris removal with nets and other flexible tethers applications

    Science.gov (United States)

    Gołębiowski, Wojciech; Michalczyk, Rafał; Dyrek, Michał; Battista, Umberto; Wormnes, Kjetil

    2016-12-01

    In the context of active debris removal technologies and preparation activities for the e.Deorbit mission, a simulator for net-shaped elastic bodies dynamics and their interactions with rigid bodies, has been developed. Its main application is to aid net design and test scenarios for space debris deorbitation. The simulator can model all the phases of the debris capturing process: net launch, flight and wrapping around the target. It handles coupled simulation of rigid and flexible bodies dynamics. Flexible bodies were implemented using Cosserat rods model. It allows to simulate flexible threads or wires with elasticity and damping for stretching, bending and torsion. Threads may be combined into structures of any topology, so the software is able to simulate nets, pure tethers, tether bundles, cages, trusses, etc. Full contact dynamics was implemented. Programmatic interaction with simulation is possible - i.e. for control implementation. The underlying model has been experimentally validated and due to significant gravity influence, experiment had to be performed in microgravity conditions. Validation experiment for parabolic flight was a downscaled process of Envisat capturing. The prepacked net was launched towards the satellite model, it expanded, hit the model and wrapped around it. The whole process was recorded with 2 fast stereographic camera sets for full 3D trajectory reconstruction. The trajectories were used to compare net dynamics to respective simulations and then to validate the simulation tool. The experiments were performed on board of a Falcon-20 aircraft, operated by National Research Council in Ottawa, Canada. Validation results show that model reflects phenomenon physics accurately enough, so it may be used for scenario evaluation and mission design purposes. The functionalities of the simulator are described in detail in the paper, as well as its underlying model, sample cases and methodology behind validation. Results are presented and

  1. EVo: Net Shape RTM Production Line

    OpenAIRE

    Sven Torstrick; Felix Kruse; Martin Wiedemann

    2016-01-01

    EVo research platform is operated by the Center for Lightweight-Production-Technology of the German Aerospace Center in Stade. Its objective is technology demonstration of a fully automated RTM (Resin Transfer Molding) production line for composite parts in large quantities. Process steps include cutting and ply handling, draping, stacking, hot-forming, preform-trimming to net shape, resin injection, curing and demolding.

  2. The Lotto and Expected Net Revenue

    OpenAIRE

    Scoggins, John F.

    1995-01-01

    A multiperiod model (based on sales from the Florida Lotto) is used to estimate revenue and probability that the grand prize will roll over. Results indicate that allocating a greater percentage of ticket sales to the grand prize increases net revenue.

  3. Integrating phenotype ontologies with PhenomeNET

    KAUST Repository

    Rodriguez-Garcia, Miguel Angel

    2017-12-19

    Background Integration and analysis of phenotype data from humans and model organisms is a key challenge in building our understanding of normal biology and pathophysiology. However, the range of phenotypes and anatomical details being captured in clinical and model organism databases presents complex problems when attempting to match classes across species and across phenotypes as diverse as behaviour and neoplasia. We have previously developed PhenomeNET, a system for disease gene prioritization that includes as one of its components an ontology designed to integrate phenotype ontologies. While not applicable to matching arbitrary ontologies, PhenomeNET can be used to identify related phenotypes in different species, including human, mouse, zebrafish, nematode worm, fruit fly, and yeast. Results Here, we apply the PhenomeNET to identify related classes from two phenotype and two disease ontologies using automated reasoning. We demonstrate that we can identify a large number of mappings, some of which require automated reasoning and cannot easily be identified through lexical approaches alone. Combining automated reasoning with lexical matching further improves results in aligning ontologies. Conclusions PhenomeNET can be used to align and integrate phenotype ontologies. The results can be utilized for biomedical analyses in which phenomena observed in model organisms are used to identify causative genes and mutations underlying human disease.

  4. Soundness of Timed-Arc Workflow Nets

    DEFF Research Database (Denmark)

    Mateo, Jose Antonio; Srba, Jiri; Sørensen, Mathias Grund

    2014-01-01

    Analysis of workflow processes with quantitative aspects like timing is of interest in numerous time-critical applications. We suggest a workflow model based on timed-arc Petri nets and study the foundational problems of soundness and strong (time-bounded) soundness. We explore the decidability o...

  5. Dahl: Time ripe for DHS net assessment

    OpenAIRE

    2016-01-01

    Article review Center for Homeland Defense and Security instructor Erik Dahl urges the Department of Homeland Security to follow a practice of its military counterparts and establish an Office of Net Assessment that would gauge future threats and the nation's ability to mitigate them.

  6. Regular Event Structures and Finite Petri Nets

    DEFF Research Database (Denmark)

    Nielsen, M.; Thiagarajan, P.S.

    2002-01-01

    We present the notion of regular event structures and conjecture that they correspond exactly to finite 1-safe Petri nets. We show that the conjecture holds for the conflict-free case. Even in this restricted setting, the proof is non-trivial and involves a natural subclass of regular event...

  7. Net escapement of Antartic krill in trawls

    DEFF Research Database (Denmark)

    Krafft, B.A.; Krag, Ludvig Ahm; Herrmann, Bent

    This document describes the aims and methodology of a three year project (commenced in 2012) entitled Net Escapement of Antarctic krill in Trawls (NEAT). The study will include a morphology based mathematical modeling (FISHSELECT) of different sex and maturity groups of Antarctic krill (Euphausia...

  8. BioNet Digital Communications Framework

    Science.gov (United States)

    Gifford, Kevin; Kuzminsky, Sebastian; Williams, Shea

    2010-01-01

    BioNet v2 is a peer-to-peer middleware that enables digital communication devices to talk to each other. It provides a software development framework, standardized application, network-transparent device integration services, a flexible messaging model, and network communications for distributed applications. BioNet is an implementation of the Constellation Program Command, Control, Communications and Information (C3I) Interoperability specification, given in CxP 70022-01. The system architecture provides the necessary infrastructure for the integration of heterogeneous wired and wireless sensing and control devices into a unified data system with a standardized application interface, providing plug-and-play operation for hardware and software systems. BioNet v2 features a naming schema for mobility and coarse-grained localization information, data normalization within a network-transparent device driver framework, enabling of network communications to non-IP devices, and fine-grained application control of data subscription band width usage. BioNet directly integrates Disruption Tolerant Networking (DTN) as a communications technology, enabling networked communications with assets that are only intermittently connected including orbiting relay satellites and planetary rover vehicles.

  9. Programming C# Building NET Applications with C#

    CERN Document Server

    Liberty, Jesse

    2009-01-01

    Programming C#, the top-selling book on Microsoft's high-performance C# programming language, is now in its fourth edition. Aimed at experienced programmers and web developers, this comprehensive guide focuses on the features and programming patterns that are unique to C#, and fundamental to the programming of web services and web applications on Microsoft's .NET platform.

  10. NetBench. Automated Network Performance Testing

    CERN Document Server

    Cadeddu, Mattia

    2016-01-01

    In order to evaluate the operation of high performance routers, CERN has developed the NetBench software to run benchmarking tests by injecting various traffic patterns and observing the network devices behaviour in real-time. The tool features a modular design with a Python based console used to inject traffic and collect the results in a database, and a web user

  11. Petri Nets as Models of Linear Logic

    DEFF Research Database (Denmark)

    Engberg, Uffe Henrik; Winskel, Glynn

    1990-01-01

    The chief purpose of this paper is to appraise the feasibility of Girad's linear logic as a specification language for parallel processes. To this end we propose an interpretation of linear logic in Petri nets, with respect to which we investigate the expressive power of the logic...

  12. OK-Net Arable online knowledge platform

    DEFF Research Database (Denmark)

    Rasmussen, Ilse Ankjær; Jensen, Allan Leck; Jørgensen, Margit Styrbæk

    2017-01-01

    The complexity of organic farming requires farmers to have a very high level of knowledge and skills, but exchange on organic farming techniques remains limited. In order to increase productivity and quality in organic arable cropping in Europe, the thematic network OK-Net Arable under Horizon 20...

  13. Musings on Sketches, Artists, and Mosquito Nets

    Centers for Disease Control (CDC) Podcasts

    2014-09-23

    Byron Breedlove reads his essay Musings on Sketches, Artists, and Mosquito Nets about the art of James Whistler and the transmission of vector borne diseases.  Created: 9/23/2014 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 10/20/2014.

  14. Educating College Students of the Net Generation

    Science.gov (United States)

    Worley, Karen

    2011-01-01

    Faculty and administrators of higher education today face a challenge with their student populations, many of whom are part of what is known as the net generation. As students become more technologically advanced, faculty must be technologically ready to meet the needs of students. Many college faculty and administrators are from earlier…

  15. State Space Methods for Timed Petri Nets

    DEFF Research Database (Denmark)

    Christensen, Søren; Jensen, Kurt; Mailund, Thomas

    2001-01-01

    We present two recently developed state space methods for timed Petri nets. The two methods reconciles state space methods and time concepts based on the introduction of a global clock and associating time stamps to tokens. The first method is based on an equivalence relation on states which makes...

  16. Average Costs versus Net Present Value

    NARCIS (Netherlands)

    E.A. van der Laan (Erwin); R.H. Teunter (Ruud)

    2000-01-01

    textabstractWhile the net present value (NPV) approach is widely accepted as the right framework for studying production and inventory control systems, average cost (AC) models are more widely used. For the well known EOQ model it can be verified that (under certain conditions) the AC approach gives

  17. Effects of independently altering body weight and body mass on the metabolic cost of running

    NARCIS (Netherlands)

    Teunissen, L.P.J.; Grabowski, A.; Kram, R.

    2011-01-01

    The metabolic cost of running is substantial, despite the savings from elastic energy storage and return. Previous studies suggest that generating vertical force to support body weight and horizontal forces to brake and propel body mass are the major determinants of the metabolic cost of running. In

  18. The Net Climate Impact of Coal-Fired Power Plant Emissions

    Science.gov (United States)

    Shindell, D.; Faluvegi, G.

    2010-01-01

    Coal-fired power plants influence climate via both the emission of long-lived carbon dioxide (CO2) and short-lived ozone and aerosol precursors. Using a climate model, we perform the first study of the spatial and temporal pattern of radiative forcing specifically for coal plant emissions. Without substantial pollution controls, we find that near-term net global mean climate forcing is negative due to the well-known aerosol masking of the effects of CO2. Imposition of pollution controls on sulfur dioxide and nitrogen oxides leads to a rapid realization of the full positive forcing from CO2, however. Long-term global mean forcing from stable (constant) emissions is positive regardless of pollution controls. Emissions from coal-fired power plants until 1970, including roughly 1/3 of total anthropogenic CO2 emissions, likely contributed little net global mean climate forcing during that period though they may have induce weak Northern Hemisphere mid-latitude (NHml) cooling. After that time many areas imposed pollution controls or switched to low sulfur coal. Hence forcing due to emissions from 1970 to 2000 and CO2 emitted previously was strongly positive and contributed to rapid global and especially NHml warming. Most recently, new construction in China and India has increased rapidly with minimal application of pollution controls. Continuation of this trend would add negative near-term global mean climate forcing but severely degrade air quality. Conversely, following the Western and Japanese pattern of imposing air quality pollution controls at a later time could accelerate future warming rates, especially at NHmls. More broadly, our results indicate that due to spatial and temporal inhomogeneities in forcing, climate impacts of multi-pollutant emissions can vary strongly from region to region and can include substantial effects on maximum rate-of-change, neither of which are captured by commonly used global metrics. The method we introduce here to estimate

  19. Modeling safety requirements of an FMS using Petri-nets

    Science.gov (United States)

    Hanna, Moheb M.; Buck, A. A.; Smith, R.

    1993-08-01

    This paper is concerned with the modelling of safety requirements using Petri nets as a tool to model and simulate a Flexible Manufacturing System (FMS). The FMS cell described comprises a pick and place robot, a multi-head drilling machine together with a vision system and illustrates how the hierarchical structure of Petri nets can be used to ensure that all fail- safe requirements are satisfied; block diagrams together with fully detailed example Petri nets are given. The work demonstrates the use of cell and robot control Petro nets together with robot subnets for the x, y and z axes and associated output nets; the control and output nets are linked together with a safety net. Individual machines are linked with the control and safety nets of an FMS at cell level. The paper also illustrates how a Petri net can act as a decision maker during image inspection and identifies the unsafe conditions that can arise within an FMS.

  20. A new variant of Petri net controlled grammars

    Science.gov (United States)

    Jan, Nurhidaya Mohamad; Turaev, Sherzod; Fong, Wan Heng; Sarmin, Nor Haniza

    2015-10-01

    A Petri net controlled grammar is a Petri net with respect to a context-free grammar where the successful derivations of the grammar can be simulated using the occurrence sequences of the net. In this paper, we introduce a new variant of Petri net controlled grammars, called a place-labeled Petri net controlled grammar, which is a context-free grammar equipped with a Petri net and a function which maps places of the net to productions of the grammar. The language consists of all terminal strings that can be obtained by parallelly applying multisets of the rules which are the images of the sets of the input places of transitions in a successful occurrence sequence of the Petri net. We study the effect of the different labeling strategies to the computational power and establish lower and upper bounds for the generative capacity of place-labeled Petri net controlled grammars.

  1. Stability of Phase Relationships While Coordinating Arm Reaches with Whole Body Motion.

    Directory of Open Access Journals (Sweden)

    Romy S Bakker

    Full Text Available The human movement repertoire is characterized by the smooth coordination of several body parts, including arm movements and whole body motion. The neural control of this coordination is quite complex because the various body parts have their own kinematic and dynamic properties. Behavioral inferences about the neural solution to the coordination problem could be obtained by examining the emerging phase relationship and its stability. Here, we studied the phase relationships that characterize the coordination of arm-reaching movements with passively-induced whole-body motion. Participants were laterally translated using a vestibular chair that oscillated at a fixed frequency of 0.83 Hz. They were instructed to reach between two targets that were aligned either parallel or orthogonal to the whole body motion. During the first cycles of body motion, a metronome entrained either an in-phase or an anti-phase relationship between hand and body motion, which was released at later cycles to test phase stability. Results suggest that inertial forces play an important role when coordinating reaches with cyclic whole-body motion. For parallel reaches, we found a stable in-phase and an unstable anti-phase relationship. When the latter was imposed, it readily transitioned or drifted back toward an in-phase relationship at cycles without metronomic entrainment. For orthogonal reaches, we did not find a clear difference in stability between in-phase and anti-phase relationships. Computer simulations further show that cost models that minimize energy expenditure (i.e. net torques or endpoint variance of the reach cannot fully explain the observed coordination patterns. We discuss how predictive control and impedance control processes could be considered important mechanisms underlying the rhythmic coordination of arm reaches and body motion.

  2. One-step electro-spinning/netting technique for controllably preparing polyurethane nano-fiber/net.

    Science.gov (United States)

    Hu, Juanping; Wang, Xianfeng; Ding, Bin; Lin, Jinyou; Yu, Jianyong; Sun, Gang

    2011-11-01

    Electro-spinning/netting (ESN) as a cutting-edge technique evokes much interest because of its ability in the one-step preparation of versatile nano-fiber/net (NFN) membranes. Here, a controllable fabrication of polyurethane (PU) NFN membranes with attractive structures, consisting of common electrospun nanofibers and two-dimensional (2D) soap bubble-like structured nano-nets via an ESN process is reported. The unique nanoscaled NFN architecture can be finely controlled by regulating the solution properties and several ESN process parameters. The versatile PU nano-nets comprising interlinked nanowires with ultrathin diameters (5-40 nm) mean that the NFN structured membranes possess several excellent characteristics, such as an extremely large specific surface area, high porosity and large stacking density, which would be particularly useful for applications in ultrafiltration, special protective clothing, ultrasensitive sensors, catalyst support and so on. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Energy Dependence of Moments of Net-Proton, Net-Kaon, and Net-Charge Multiplicity Distributions at STAR

    CERN Document Server

    ,

    2016-01-01

    One of the main goals of the RHIC Beam Energy Scan (BES) program is to study the QCD phase structure, which includes the search for the QCD critical point, over a wide range of chemical potential. Theoretical calculations predict that fluctuations of conserved quantities, such as baryon number (B), charge (Q), and strangeness (S), are sensitive to the correlation length of the dynamical system. Experimentally, higher moments of multiplicity distributions have been utilized to search for the QCD critical point in heavy-ion collisions. In this paper, we report recent efficiency-corrected cumulants and cumulants ratios of the net- proton, net-kaon, and net-charge multiplicity distributions in Au+Au collisions at 7.7, 11.5, 14.5, 19.6, 27, 39, 62.4, and 200 GeV collected in the years 2010, 2011, and 2014 with STAR at RHIC. The centrality and energy dependence of the cumulants up to the fourth order, as well as their ratios, are presented. Furthermore, the comparisons with baseline calculations (Poisson) and non-c...

  4. Knee joint forces: prediction, measurement, and significance

    Science.gov (United States)

    D’Lima, Darryl D.; Fregly, Benjamin J.; Patil, Shantanu; Steklov, Nikolai; Colwell, Clifford W.

    2011-01-01

    Knee forces are highly significant in osteoarthritis and in the survival and function of knee arthroplasty. A large number of studies have attempted to estimate forces around the knee during various activities. Several approaches have been used to relate knee kinematics and external forces to internal joint contact forces, the most popular being inverse dynamics, forward dynamics, and static body analyses. Knee forces have also been measured in vivo after knee arthroplasty, which serves as valuable validation of computational predictions. This review summarizes the results of published studies that measured knee forces for various activities. The efficacy of various methods to alter knee force distribution, such as gait modification, orthotics, walking aids, and custom treadmills are analyzed. Current gaps in our knowledge are identified and directions for future research in this area are outlined. PMID:22468461

  5. Conteúdo de energia líquida para mantença e ganho do capim-elefante e mudanças na composição corporal de novilhos em pastejo, durante a estação chuvosa Net energy content for maintenance and weight gain of elephantgrass and changes on body composition of grazing steers during the rainy season

    Directory of Open Access Journals (Sweden)

    Carlos Augusto de Alencar Fontes

    2005-10-01

    elevados.The net energy content for maintenance (NEm and gain (NEg of the napiergrass, under rotational grazing, as well as the changes on protein and fat concentrations in body and in weight gain of 36 ¾ Gyr-Holstein steers, grazing the forage, during the rainy season were determined. Half of steers had grazing time restricted to four hours daily, to limit energy intake to a level close to the maintenance level, and half had free access to the pasture. Six steers were slaughtered at begining of the trial, to determine initial body composition, and six (three from each treatment, at each subsequent 35 day. Prediction equations of the changes of body composition, with increase of body weight, were fitted by regression of log10 body content of protein and fat on log10 empty body weight. By differentiation of those equations, the prediction equations of composition of weight gain were obtained. The energy concentrations were estimated from protein and fat content and respective calorie equivalents. By regression of retained energy (RE on metabolizable energy (ME intake, the efficiency of ME utilization for gain, as the regression coeficient, and the ME requirement for maintenance (level of ME intake for RE = 0 were estimated. The efficiency of utilization of ME for maintenance (Km was obtained by the ratio: Km = NEm/MEm. The NEm and NEg of napiergrass were determined, respectively, as the products of Km and Kg to ME content of the forage, and the values 1.02 and 0.59 Mcal/kg dry matter, respectively, were obtained. The protein concentrations in the body and in body weight gain remained in higher levels and the fat energy concentrations remained in lower levels than those reported, in Brazil, for zebu and crossbred steers showing higher weight gains.

  6. 2006 Net Centric Operations Conference - Facilitating Net Centric Operations and Warfare

    Science.gov (United States)

    2006-03-16

    Moderator: Lt Col Kenneth Lang, USAF, Chief, Net Centric Transformational Operations, C4 Transformation Division (US JFCOM/J69) Panelists...of Interest (US JFCOM/J61) - Mr. Troy Turner, Section Head, C4 Interoperability (ACT) - COL Kelly Mayes, USA, Director, Campaign Planning...Deliverables NCAT NIF SCOPE Net Centric Assessment Tools (includes SCOPE & PFCs evaluation) Conceptual Architecture Framework Standards PFCs: Building Codes

  7. Linking a domain thesaurus to WordNet and conversion to WordNet-LMF

    OpenAIRE

    Toral, Antonio; Monachini, Monica; Soria, Claudia; Cuadros Oller, Montserrat; Rigau Claramunt, German; Bosma, Wauter; Vossen, Piek

    2010-01-01

    We present a methodology to link domain thesauri to general-domain lexica. This is applied in the framework of the KYOTO project to link the Species2000 thesaurus to the synsets of the English WordNet. Moreover, we study the formalisation of this thesaurus according to the ISO LMF standard and its dialect WordNet-LMF. This conversion will allow Species2000 to communicate with the other resources available in the KYOTO architecture. Peer Reviewed

  8. Comparison of global and joint-to-joint methods for estimating the hip joint load and the muscle forces during walking.

    Science.gov (United States)

    Fraysse, F; Dumas, R; Cheze, L; Wang, X

    2009-10-16

    A three-dimensional musculoskeletal model of the lower limb was developed to study the influence of biarticular muscles on the muscle force distribution and joint loads during walking. A complete walking cycle was recorded for 9 healthy subjects using the standard optoelectronic motion tracking system. Ground contact forces were also measured using a 6-axes force plate. Inverse dynamics was used to compute net joint reactions (forces and torques) in the lower limb. A static optimization method was then used to estimate muscle forces. Two different approaches were used: in the first one named global method, the biarticular muscles exerted a torque on the two joints they spanned at the same time, and in the second one called joint-by-joint method, these biarticular muscles were divided into two mono-articular muscles with geometrical (insertion, origin, via points) and physiological properties remained unchanged. The hip joint load during the gait cycle was then calculated taking into account the effect of muscle contractions. The two approaches resulted in different muscle force repartition: the biarticular muscles were favoured over any set of single-joint muscles with the same physiological function when using the global method. While the two approaches yielded only little difference in the resultant hip load, the examination of muscle power showed that biarticular muscles could produce positive work at one joint and negative work at the other, transferring energy between body segments and thus decreasing the metabolic cost of movement.

  9. Force production in the rugby union scrum.

    Science.gov (United States)

    Quarrie, K L; Wilson, B D

    2000-04-01

    In this study, we examined the relationship between anthropometric, strength and power characteristics of rugby forwards, their body position when scrummaging, and their ability to apply force when scrummaging. Force applied to an instrumented scrum machine was measured for 56 players, both individually and as scrum packs. Measurements of body position for individuals were made by digitizing videotape records of the trials. Forty players subsequently had their anthropometry assessed and completed several strength and power tests. Body mass, each component of somatotype, maximal anaerobic power developed on a cycle ergometer, and isokinetic knee extension strength correlated significantly with individual scrummaging force. A regression model (P scrum pack to develop technique and coordination as a unit to maximize scrummaging force.

  10. The evolution of vertical climbing in primates: evidence from reaction forces.

    Science.gov (United States)

    Hanna, Jandy B; Granatosky, Michael C; Rana, Pooja; Schmitt, Daniel

    2017-09-01

    Vertical climbing is an essential behavior for arboreal animals, yet limb mechanics during climbing are poorly understood and rarely compared with those observed during horizontal walking. Primates commonly engage in both arboreal walking and vertical climbing, and this makes them an ideal taxa in which to compare these locomotor forms. Additionally, primates exhibit unusual limb mechanics compared with most other quadrupeds, with weight distribution biased towards the hindlimbs, a pattern that is argued to have evolved in response to the challenges of arboreal walking. Here we test an alternative hypothesis that functional differentiation between the limbs evolved initially as a response to climbing. Eight primate species were recorded locomoting on instrumented vertical and horizontal simulated arboreal runways. Forces along the axis of, and normal to, the support were recorded. During walking, all primates displayed forelimbs that were net braking, and hindlimbs that were net propulsive. In contrast, both limbs served a propulsive role during climbing. In all species, except the lorisids, the hindlimbs produced greater propulsive forces than the forelimbs during climbing. During climbing, the hindlimbs tends to support compressive loads, while the forelimb forces tend to be primarily tensile. This functional disparity appears to be body-size dependent. The tensile loading of the forelimbs versus the compressive loading of the hindlimbs observed during climbing may have important evolutionary implications for primates, and it may be the case that hindlimb-biased weight support exhibited during quadrupedal walking in primates may be derived from their basal condition of climbing thin branches. © 2017. Published by The Company of Biologists Ltd.

  11. Fuzzy net present value for engineering analysis

    Directory of Open Access Journals (Sweden)

    Ali Nazeri

    2012-10-01

    Full Text Available Cash flow analysis is one of the most popular methods for investigating the outcome of an economical project. The costs and benefits of a construction project are often involved with uncertainty and it is not possible to find a precise value for a particular project. In this paper, we present a simple method to calculate the net present value of a cash flow when both costs and benefits are given as triangular numbers. The proposed model of this paper uses Delphi method to figure out the fair values of all costs and revenues and then using fizzy programming techniques, it calculates the fuzzy net present value. The implementation of the proposed model is demonstrated using a simple example.

  12. Design and evaluation of net radiometers

    Science.gov (United States)

    Fritschen, Leo J.; Fritschen, Charles L.

    Net radiometer designs were evaluated with respect to long and short wave sensitivities and to the effect of ambient wind on the signal. The design features of the instrument with the best overall performance include: equal sensitivity to long and short wave radiation, a thermal pile which is thermally isolated from the frame, a white guard ring, pathways for internal circulation between the top and bottom hemispheres, and self-supporting windshields. The windshields have O-ring seals, a ball joint is provided for ease of leveling, and ample desiccant is enclosed in the mounting pipe. Under a high radiant load, the net radiometer signal decreased by 2.5, 3.7, and 4.3 percent at wind speeds of 12.5, 4.6, and 7.5 m/s.

  13. Multi-net optimization of VLSI interconnect

    CERN Document Server

    Moiseev, Konstantin; Wimer, Shmuel

    2015-01-01

    This book covers layout design and layout migration methodologies for optimizing multi-net wire structures in advanced VLSI interconnects. Scaling-dependent models for interconnect power, interconnect delay and crosstalk noise are covered in depth, and several design optimization problems are addressed, such as minimization of interconnect power under delay constraints, or design for minimal delay in wire bundles within a given routing area. A handy reference or a guide for design methodologies and layout automation techniques, this book provides a foundation for physical design challenges of interconnect in advanced integrated circuits.  • Describes the evolution of interconnect scaling and provides new techniques for layout migration and optimization, focusing on multi-net optimization; • Presents research results that provide a level of design optimization which does not exist in commercially-available design automation software tools; • Includes mathematical properties and conditions for optimal...

  14. Automatic pipeline operation using Petri Nets

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Guilherme O. [PETROBRAS TRANSPORTE S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    A pipeline operation requires several actions, attention and time from the control room operator in each of its operating phases. This article proposition is to use automation as something more than a remote control, drastically reducing the number of repetitive and routine actions needed from the operator to start and stop the system, granting more time for system supervision, decision making during critical conditions and avoiding errors caused due to the need of several actions being executed in a short period of time. To achieve these objectives the pipeline operation will be modeled as a Petri Net consisting of states, event and actions. A methodology for converting this Petri Net into a Ladder controller code will also be proposed. (author)

  15. AstroNet-II International Final Conference

    CERN Document Server

    Masdemont, Josep

    2016-01-01

    These are the proceedings of the "AstroNet-II International Final Conference". This conference was one of the last milestones of the Marie-Curie Research Training Network on Astrodynamics "AstroNet-II", that has been funded by the European Commission under the Seventh Framework Programme. The aim of the conference, and thus this book, is to communicate work on astrodynamics problems to an international and specialised audience. The results are presented by both members of the network and invited specialists. The topics include: trajectory design and control, attitude control, structural flexibility of spacecraft and formation flying. The book addresses a readership across the traditional boundaries between mathematics, engineering and industry by offering an interdisciplinary and multisectorial overview of the field.

  16. Body contact and body language

    DEFF Research Database (Denmark)

    Winther, Helle

    2008-01-01

    Body contact and body language are unique and existential and, although culturally dependent and socially embodied, they are also universal communication forms. For small children all over the world, warm, close and nourishing body contact is fundamental to their embodied experi­ence of themselves...... and the boundaries between self and world. In western societies, the modern premises for contact are in some ways developing from close contact to virtual communication. With this breadth of perspective in mind, the ques­tion is whether conscious and experimental work with body contact and body language in move......­ment psychology and education provide potential for intense personal develop­ment as well as for social and cultural learning processes. This performative research project originates from the research project entitled, Movement Psy­chol­ogy: The Language of the Body and the Psy­chol­ogy of Movement based...

  17. EVo: Net Shape RTM Production Line

    Directory of Open Access Journals (Sweden)

    Sven Torstrick

    2016-04-01

    Full Text Available EVo research platform is operated by the Center for Lightweight-Production-Technology of the German Aerospace Center in Stade. Its objective is technology demonstration of a fully automated RTM (Resin Transfer Molding production line for composite parts in large quantities. Process steps include cutting and ply handling, draping, stacking, hot-forming, preform-trimming to net shape, resin injection, curing and demolding.

  18. Status of KM3NeT

    Directory of Open Access Journals (Sweden)

    Riccobene G.

    2016-01-01

    Full Text Available The recent observation of cosmic neutrinos by IceCube has pushed the quest towards the identification of cosmic sources of high-energy particles. The KM3NeT Collaboration is now ready to launch the massive construction of detection units to be installed in deep sea to build a km-cubic size neutrino telescope. The main elements of the detector, the status of the project and the expected perfomances are briefly reported.

  19. A Petri Nets Model for Blockchain Analysis

    OpenAIRE

    Pinna, Andrea; Tonelli, Roberto; Orrú, Matteo; Marchesi, Michele

    2017-01-01

    A Blockchain is a global shared infrastructure where cryptocurrency transactions among addresses are recorded, validated and made publicly available in a peer- to-peer network. To date the best known and important cryptocurrency is the bitcoin. In this paper we focus on this cryptocurrency and in particular on the modeling of the Bitcoin Blockchain by using the Petri Nets formalism. The proposed model allows us to quickly collect information about identities owning Bitcoin addresses and to re...

  20. AREVA net income: 649 million euros

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-03-15

    This document presents the financial statements for 2006 of Areva group: net income: 649 million euros; backlog up by 24.6% to 25.6 billion euros; steady growth of sales revenue: + 7.3%1 to 10.863 billion euros; operating income of 407 million euros: excellent divisional performance and constitution of a significant provision for the OL3 project in Finland; dividend proposed to Annual General Meeting of Shareholders: 8.46 euros per share.