What is the best practice for benchmark regulation of electricity distribution? Comparison of DEA, SFA and StoNED methods

International Nuclear Information System (INIS)

Kuosmanen, Timo; Saastamoinen, Antti; Sipiläinen, Timo

2013-01-01

Electricity distribution is a natural local monopoly. In many countries, the regulators of this sector apply frontier methods such as data envelopment analysis (DEA) or stochastic frontier analysis (SFA) to estimate the efficient cost of operation. In Finland, a new StoNED method was adopted in 2012. This paper compares DEA, SFA and StoNED in the context of regulating electricity distribution. Using data from Finland, we compare the impacts of methodological choices on cost efficiency estimates and acceptable cost. While the efficiency estimates are highly correlated, the cost targets reveal major differences. In addition, we examine performance of the methods by Monte Carlo simulations. We calibrate the data generation process (DGP) to closely match the empirical data and the model specification of the regulator. We find that the StoNED estimator yields a root mean squared error (RMSE) of 4% with the sample size 100. Precision improves as the sample size increases. The DEA estimator yields an RMSE of approximately 10%, but performance deteriorates as the sample size increases. The SFA estimator has an RMSE of 144%. The poor performance of SFA is due to the wrong functional form and multicollinearity. - Highlights: • We compare DEA, SFA and StoNED methods in the context of regulation of electricity distribution. • Both empirical comparisons and Monte Carlo simulations are presented. • Choice of benchmarking method has a significant economic impact on the regulatory outcomes. • StoNED yields the most precise results in the Monte Carlo simulations. • Five lessons concerning heterogeneity, noise, frontier, simulations, and implementation

Ned-19 inhibition of parasite growth and multiplication suggests a role for NAADP mediated signalling in the asexual development of Plasmodium falciparum.

Science.gov (United States)

Suárez-Cortés, Pablo; Gambara, Guido; Favia, Annarita; Palombi, Fioretta; Alano, Pietro; Filippini, Antonio

2017-09-12

Although malaria is a preventable and curable human disease, millions of people risk to be infected by the Plasmodium parasites and to develop this illness. Therefore, there is an urgent need to identify new anti-malarial drugs. Ca 2+ signalling regulates different processes in the life cycle of Plasmodium falciparum, representing a suitable target for the development of new drugs. This study investigated for the first time the effect of a highly specific inhibitor of nicotinic acid adenine dinucleotide phosphate (NAADP)-induced Ca 2+ release (Ned-19) on P. falciparum, revealing the inhibitory effect of this compound on the blood stage development of this parasite. Ned-19 inhibits both the transition of the parasite from the early to the late trophozoite stage and the ability of the late trophozoite to develop to the multinucleated schizont stage. In addition, Ned-19 affects spontaneous intracellular Ca 2+ oscillations in ring and trophozoite stage parasites, suggesting that the observed inhibitory effects may be associated to regulation of intracellular Ca 2+ levels. This study highlights the inhibitory effect of Ned-19 on progression of the asexual life cycle of P. falciparum. The observation that Ned-19 inhibits spontaneous Ca 2+ oscillations suggests a potential role of NAADP in regulating Ca 2+ signalling of P. falciparum.

Adoption, Acceptability, and Effectiveness of a Mobile Health App for Personalized Prostate Cancer Survivorship Care: Protocol for a Realist Case Study of the Ned App.

Science.gov (United States)

Pham, Quynh; Cafazzo, Joseph A; Feifer, Andrew

2017-10-12

what circumstances. Understanding the impact of digital health interventions such as Ned on how survivors care for themselves is critical to realizing patient-centered care. ©Quynh Pham, Joseph A Cafazzo, Andrew Feifer. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 12.10.2017.

NedWind with 80 MW wind power capacity leader in the Netherlands

International Nuclear Information System (INIS)

Anon.

1996-01-01

At 31 December 1995 1050 wind turbines were in operation in the Netherlands with a total capacity of 255 MW. An overview is given of the top locations of wind turbines in different categories and from different manufacturers and owners. The wind turbine manufacturer NedWind is leading the field. 9 figs

Heat Treatment Optimization Studies on PIT Nb$_3$Sn Strand for the NED Project

CERN Document Server

Boutboul, T; den Ouden, A; Pedrini, D; Seeber, B; Volpini, G

2009-01-01

For the Next European Dipole (NED) program, a Powder-In-Tube (PIT) strand was successfully developed by SMI. This high-performance Nb$_{3}$Sn strand presents a non-copper critical current density of ~ 2500 A/mm2 at 12 T applied field and 4.2 K and a filament diameter around 50 µm. Extensive heat treatment optimization studies were performed in order to maximize both critical current and RRR, with a plateau temperature down to 625 oC and duration up to 400 hours. It appears that a critical current enhancement of ~ 10 % can be achieved for a reaction schedule of 320 hours at 625 oC with non-copper critical current density respectively exceeding 2700 and 1500 A/mm2 at 12 and 15 T (4.2 K). Thanks to this modified heat treatment, this strand completely fulfils the NED stringent specification.

A novel synthetic Piper amide derivative NED-180 inhibits hyperpigmentation by activating the PI3K and ERK pathways and by regulating Ca2+ influx via TRPM1 channels.

Science.gov (United States)

Hwang, Eunson; Lee, Taek Hwan; Lee, Wook-Joo; Shim, Won-Sik; Yeo, Eui-Ju; Kim, Sanghee; Kim, Sun Yeou

2016-01-01

Piper amides have a characteristic, unsaturated amide group and exhibit diverse biological activities, including proliferation and differentiation of melanocytes, although the molecular mechanisms underlying its antimelanogenesis effect remain unknown. We screened a selected chemical library of newly synthesized Piper amide derivatives and identified (E)-3-(4-(tert-butyl)phenyl)-N-(2,3-dihydrobenzo[b][1,4]dioxin-6-yl)acrylamide (NED-180) as one of the most potent compounds in suppressing melanogenesis. In murine melan-a melanocytes, NED-180 downregulated the expression of melanogenic regulatory proteins including tyrosinase, Tyrp1, Dct, and MITF. PI3K/Akt-dependent phosphorylation of GSK3β by NED-180 decreases MITF phosphorylation and inhibits melanogenesis without any effects on cytotoxicity and proliferation. Furthermore, topical application of NED-180 significantly ameliorated UVB-induced skin hyperpigmentation in guinea pigs. Interestingly, data obtained using calcium imaging techniques suggested that NED-180 reduced the TPA-induced activation of TRPM1 (melastatin), which could explain the NED-180-induced inhibition of melanogenesis. All things taken together, NED-180 triggers activation of multiple pathways, such as PI3K and ERK, and inhibits TRPM1/TRPV1, leading to inhibition of melanogenesis. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Effects of intraday trade on NorNed

Energy Technology Data Exchange (ETDEWEB)

2011-06-15

In this report we study the effects of introducing intraday trade on the NorNed cable between Norway and the Netherlands, effectively increasing the geographical scope of the existing intraday markets in both countries, by analysing the effects on the incentives of existing and potential new market participants. The analysis of the effects on incentives is mainly based on a fundamental analysis of resource prices in the two countries, using the day-ahead supply curves in both countries. It also includes an analysis of the dynamics of trade, interdependencies between the different market time frames (day-ahead, intraday and balancing stage) and price behaviour. In addition we describe the day-ahead, intraday and balancing markets of the two countries and identify factors in the market designs which may affect the incentives for intraday trade. (Author)

CARE07 Coordinated Accelerator Research in Europe

CERN Multimedia

2007-01-01

Annual Meeting, at CERN, 29-31 October 2007 The CARE project started on 1st January 2004 and will end on 31st December 2008. At the end of each year, the progress and status of its activities are reported in a general meeting. This year, the meeting takes place at CERN. The CARE objective is to generate structured and integrated European cooperation in the field of accelerator research and related R&D. The programme includes the most advanced scientific and technological developments, relevant to accelerator research for particle physics. It is articulated around three Networking Activities and four Joint Activities. The Networking Activities ELAN, BENE and HHH aim to better coordinate R&D efforts at the European level and to strengthen Europe’s ability to produce intense and high-energy particle beams (electrons and positrons, muons and neutrinos, protons and ions, respectively). The Joint Activities, SRF, PHIN, HIPPI and NED, aim at technical developments on s...

CARE07 Coordinated Accelerator Research in Europe

CERN Multimedia

2007-01-01

Annual Meeting, at CERN, 29-31 October 2007 The CARE project started on 1st January 2004 and will end on 31st December 2008. At the end of each year, the progress and status of its activities are reported in a general meeting. This year, the meeting is taking place at CERN. The CARE objective is to generate structured and integrated European cooperation in the field of accelerator research and related R&D. The programme includes the most advanced scientific and technological developments, relevant to accelerator research for particle physics. It is articulated around three Networking Activities and four Joint Activities. The Networking Activities ELAN, BENE and HHH aim to better coordinate R&D efforts at the European level and to strengthen Europe’s ability to produce intense and high-energy particle beams (electrons and positrons, muons and neutrinos, protons and ions, respectively). The Joint Activities, SRF, PHIN, HIPPI and NED, aim at technical developments ...

78 FR 28292 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2013-05-14

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical Science Research and Development Services Scientific Merit Review Board; Notice of Meetings; Amendment The... Joint Biomedical Laboratory Research and Development and Clinical Science Research and Development...

78 FR 66992 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2013-11-07

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical... the panels of the Joint Biomedical Laboratory Research and Development and Clinical Science Research..., behavioral, and clinical science research. The panel meetings will be open to the public for approximately...

75 FR 57833 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2010-09-22

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical... the panels of the Joint Biomedical Laboratory Research and Development and Clinical Science Research... Crowne Plaza Clinical Research Program December 3, 2010 *VA Central Office Mental Hlth & Behav Sci-A...

78 FR 22622 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2013-04-16

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical... the panels of the Joint Biomedical Laboratory Research and Development and Clinical Science Research... biomedical, behavioral and clinical science research. The panel meetings will be open to the public for...

76 FR 19188 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2011-04-06

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical... the panels of the Joint Biomedical Laboratory Research and Development and Clinical Science Research.... Neurobiology-D June 10, 2011 Crowne Plaza DC/Silver Spring. Clinical Research Program June 13, 2011 VA Central...

75 FR 23847 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2010-05-04

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical... panels of the Joint Biomedical Laboratory Research and Development and Clinical Science Research and... & Behav Sci-A June 7, 2010 L'Enfant Plaza Hotel. Clinical Research Program June 9, 2010 *VA Central Office...

77 FR 64598 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2012-10-22

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical...) that the panels of the Joint Biomedical Laboratory Research and Development and Clinical Science... areas of biomedical, behavioral and clinical science research. The panel meetings will be open to the...

Research on decommissioning of nuclear facilities (Joint research)

International Nuclear Information System (INIS)

Shibahara, Yuji; Morishita, Yoshitsugu; Ishigami, Tsutomu; Yanagihara, Satoshi; Arita, Yuji

2011-07-01

To implement a decommissioning project reasonably, it is necessary and important to beforehand evaluate project management data as well as to select an optimum dismantling scenario among various scenarios postulated. Little study on the subject of selecting an optimum scenario has been carried out, and it is one of the most important subjects in terms of decision making. In FY 2009, Japan Atomic Energy Agency and University of Fukui launched the joint research of a decision making method which is important to determine a decommissioning plan. The purpose of the research is to construct a methodology for selecting an optimum dismantling scenario among various scenarios postulated based on calculated results of project management data for FUGEN. Project management data for several dismantling scenarios postulated at FUGEN were evaluated based on actual dismantling work for feed water heater at FUGEN, and an optimum scenario was discussed using the SMART, one of Multi-Criteria Decision Analysis Method. This report describes the results of the joint research in FY 2009. (author)

15 CFR 295.23 - Dissolution of joint research and development ventures.

Science.gov (United States)

2010-01-01

... Development Ventures § 295.23 Dissolution of joint research and development ventures. Upon dissolution of any joint research and development venture receiving funds under these procedures or at a time otherwise... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Dissolution of joint research and...

Joint Global Change Research Institute (JGCRI)

Data.gov (United States)

Federal Laboratory Consortium — The Joint Global Change Research Institute (JGCRI) is dedicated to understanding the problems of global climate change and their potential solutions. The Institute...

DOE-EERC jointly sponsored research program

Energy Technology Data Exchange (ETDEWEB)

Hendrikson, J.G.; Sondreal, E.A.

1999-09-01

U.S. Department of Energy (DOE) Cooperative Agreement DE-FC21-93MC30098 funded through the Office of Fossil Energy and administered at the Federal Energy Technology Center (FETC) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy and Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying efficient, nonpolluting energy technologies that can compete effectively in meeting market demands for clean fuels, chemical feedstocks, and electricity in the 21st century. The objective of the JSRP was to advance the deployment of advanced technologies for improving energy efficiency and environmental performance through jointly sponsored research on topics that would not be adequately addressed by the private sector alone. Examples of such topics include the barriers to hot-gas cleaning impeding the deployment of high-efficiency power systems and the search for practical means for sequestering CO{sub 2} generated by fossil fuel combustion. The selection of particular research projects was guided by a combination of DOE priorities and market needs, as provided by the requirement for joint venture funding approved both by DOE and the private sector sponsor. The research addressed many different energy resource and related environmental problems, with emphasis directed toward the EERC's historic lead mission in low-rank coals (LRCs), which represent approximately half of the U.S. coal resources in the conterminous states, much larger potential resources in Alaska, and a major part of the energy base in the former U.S.S.R., East Central Europe, and the Pacific Rim. The Base and JSRP agreements were tailored to the growing awareness of critical environmental issues, including water supply and quality, air toxics (e.g., mercury), fine respirable particulate matter (PM{sub 2.5}), and the goal of zero net CO{sub 2} emissions.

Periprosthetic Joint Infections: Clinical and Bench Research

Directory of Open Access Journals (Sweden)

Laurence Legout

2013-01-01

Full Text Available Prosthetic joint infection is a devastating complication with high morbidity and substantial cost. The incidence is low but probably underestimated. Despite a significant basic and clinical research in this field, many questions concerning the definition of prosthetic infection as well the diagnosis and the management of these infections remained unanswered. We review the current literature about the new diagnostic methods, the management and the prevention of prosthetic joint infections.

The JAERI and Universities joint project research reports on the 4th joint research project between JAERI and Universities on backend chemistry

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-02-01

In the Joint Research Project between JAERI and Universities on Backend Chemistry, the 4th-term researches of it were performed on sixteen themes from April of 1999 to March of 2001 under the four categories, i.e. Nuclear-chemistry and physical-chemistry properties of actinides', 'Solid state chemistry and nuclear fuel engineering of actinides', 'Solution chemistry and technologies for separation and analysis of actinides' and Treatment of radioactive waste and environmental chemistry'. The present report compiled the papers contributed to the Joint Research Project. (author)

Jointly Sponsored Research Program

Energy Technology Data Exchange (ETDEWEB)

Everett A. Sondreal; John G. Hendrikson; Thomas A. Erickson

2009-03-31

U.S. Department of Energy (DOE) Cooperative Agreement DE-FC26-98FT40321 funded through the Office of Fossil Energy and administered at the National Energy Technology Laboratory (NETL) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy & Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying highly efficient, nonpolluting energy systems that meet the nation's requirements for clean fuels, chemicals, and electricity in the 21st century. The EERC in partnership with its nonfederal partners jointly performed 131 JSRP projects for which the total DOE cost share was $22,716,634 (38%) and the nonfederal share was $36,776,573 (62%). Summaries of these projects are presented in this report for six program areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, and (6) advanced materials. The work performed under this agreement addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration; near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources.

Application of computer-assisted imaging technology in human musculoskeletal joint research

Directory of Open Access Journals (Sweden)

Xudong Liu

2014-01-01

Full Text Available Computer-assisted imaging analysis technology has been widely used in the musculoskeletal joint biomechanics research in recent years. Imaging techniques can accurately reconstruct the anatomic features of the target joint and reproduce its in vivo motion characters. The data has greatly improved our understanding of normal joint function, joint injury mechanism, and surgical treatment, and can provide foundations for using reverse-engineering methods to develop biomimetic artificial joints. In this paper, we systematically reviewed the investigation of in vivo kinematics of the human knee, shoulder, lumber spine, and ankle using advanced imaging technologies, especially those using a dual fluoroscopic imaging system (DFIS. We also briefly discuss future development of imaging analysis technology in musculoskeletal joint research.

The strength research of the adhesive joints of sheet structures ...

African Journals Online (AJOL)

The research results of stress-strained condition of constructional sheet materials are given in the article. The strength dependence on type, configuration and sizes of adhesive joints is analyzed. The research of the strength dependence was made on the samples from bakelite plywood with the main types of adhesive joints ...

Bridging the Gap Between Innovation and ELSA: The TA Program in the Dutch Nano-R&D Program NanoNed

NARCIS (Netherlands)

Rip, Arie; van Lente, H

2013-01-01

The Technology Assessment (TA) Program established in 2003 as part of the Dutch R&D consortium NanoNed is interesting for what it did, but also as an indication that there are changes in how new science and technology are pursued: the nanotechnologists felt it necessary to spend part of their

Comparison of 2-D Magnetic Designs of Selected Coil Configurations for the Next European Dipole (NED)

CERN Document Server

Toral, F; Felice, H; Fessia, Paolo; Loveridge, P W; Regis, Federico; Rochford, J; Sanz, S; Schwerg, Nikolai; Védrine, P; Völlinger, Christine

2007-01-01

The Next European Dipole (NED) activity is developing a high-performance Nb$_{3}$Sn wire (aiming at a non-copper critical current density of 1500 A/mm2 at 4.2 K and 15 T), within the framework of the Coordinated Accelerator Research in Europe (CARE) project. This activity is expected to lead to the fabrication of a large aperture, high field dipole magnet. In preparation for this phase, a Working Group on Magnet Design and Optimization (MDO) has been established to propose an optimal design. Other parallel Work Packages are concentrating on relevant topics, such as quench propagation simulation, innovative insulation techniques, and heat transfer measurements. In a first stage, the MDO Working Group has selected a number of coil configurations to be studied, together with salient parameters and features to be considered during the evaluation: the field quality, the superconductor efficiency, the conductor peak field, the stored magnetic energy, the Lorentz Forces and the fabrication difficulties. 2-D magnetic...

Research of the Resistance of Contact Welding Joint of R65 Type Rail

Directory of Open Access Journals (Sweden)

Kęstutis Dauskurdis

2015-03-01

Full Text Available In the article the R65 type rail joints that were welded by resistance welding are analysed. Survey methodology of the research consists of the following parts: visual inspection of welded joint, ultrasonic rail inspection, hardness test of upper part of the rail, fusion area research, the measurement hardness test of heat-softened area, the measurement microhardness test, microstructure research of the welded joint, impact strength experiments, chemical analysis of welded joint, wheel-rail interaction research using the finite element method (FEM. The results of the research are analysed and the quality of weld is evaluated. The conclusion is based on the results of this research.

R&D returns, market structure and research joint ventures

DEFF Research Database (Denmark)

Amir, Rabah

2000-01-01

(one firm endogenously exiting). Two research joint venture schemes and the noncooperative solution are compared. Due to built-in symmetry, a joint lab does not always lead to the best performance. Overall, our findings differ quite substantially from those based on strongly decreasing R&D returns...

Report of results of joint research using facilities in Japan Atomic Energy Research Institute in fiscal year 1987

International Nuclear Information System (INIS)

1988-06-01

The total themes of the joint research in fiscal year 1987 were 127. These are shown being classified into the general joint research in Tokai and Takasaki, neutron diffraction research and cooperative research. The general joint research is the standard utilization form using research reactors JRR-2 and JRR-4, Co-60 gamma irradiation facilities in Tokai and Takasaki, an electron beam irradiation facility in Takasaki, an electron beam linear accelator and hot laboratories, which are opened for common utilization by Japan Atomic Energy Research Institute. The cooperative research is carried out by concluding research cooperation contracts between the researchers of universities and JAERI. In the general joint research, radioactivation analysis, radiation chemistry, irradiation effect, neutron diffraction and so on are the main themes, and in the cooperative research, reactor technology, reactor materials, nuclear physics measurement and others are the main themes. The total number of visitors was 2629 man-day, and decreased due to the stop of JRR-2. Also other activities are reported. The abstracts of respective reports are collected in this book. (Kako, I.)

A method of rapidly evaluating image quality of NED optical system

Science.gov (United States)

Sun, Qi; Qiu, Chuankai; Yang, Huan

2014-11-01

In recent years, with the development of technology of micro-display, advanced optics and the software and hardware, near-to-eye display ( NED) optical system will have a wide range of potential applications in the fields of amusement and virtual reality. However, research on the evaluating image quality of this kind optical system is comparatively lagging behind. Although now there are some methods and equipment for evaluation, they can't be applied in commercial production because of their complex operation and inaccuracy. In this paper, an academic method is proposed and a Rapid Evaluation System (RES) is designed to evaluate the image of optical system rapidly and exactly. Firstly, a set of parameters that eyes are sensitive to and also express the quality of system should be extracted and quantized to be criterion, so the evaluation standards can be established. Then, some parameters can be detected by RES consisted of micro-display, CCD camera and computer and so on. By process of scaling, the measuring results of the RES are exact and creditable, relationship between object measurement, subjective evaluation and the RES will be established. After that, image quality of optical system can be evaluated just by detecting parameters of that. The RES is simple and the results of evaluation are exact and keeping with human vision. So the method can be used not only for optimizing design of optical system, but also for evaluation in commercial production.

Jointly Sponsored Research Program Energy Related Research

Energy Technology Data Exchange (ETDEWEB)

Western Research Institute

2009-03-31

Cooperative Agreement, DE-FC26-98FT40323, Jointly Sponsored Research (JSR) Program at Western Research Institute (WRI) began in 1998. Over the course of the Program, a total of seventy-seven tasks were proposed utilizing a total of $23,202,579 in USDOE funds. Against this funding, cosponsors committed $26,557,649 in private funds to produce a program valued at $49,760,228. The goal of the Jointly Sponsored Research Program was to develop or assist in the development of innovative technology solutions that will: (1) Increase the production of United States energy resources - coal, natural gas, oil, and renewable energy resources; (2) Enhance the competitiveness of United States energy technologies in international markets and assist in technology transfer; (3) Reduce the nation's dependence on foreign energy supplies and strengthen both the United States and regional economies; and (4) Minimize environmental impacts of energy production and utilization. Under the JSR Program, energy-related tasks emphasized enhanced oil recovery, heavy oil upgrading and characterization, coal beneficiation and upgrading, coal combustion systems development including oxy-combustion, emissions monitoring and abatement, coal gasification technologies including gas clean-up and conditioning, hydrogen and liquid fuels production, coal-bed methane recovery, and the development of technologies for the utilization of renewable energy resources. Environmental-related activities emphasized cleaning contaminated soils and waters, processing of oily wastes, mitigating acid mine drainage, and demonstrating uses for solid waste from clean coal technologies, and other advanced coal-based systems. Technology enhancement activities included resource characterization studies, development of improved methods, monitors and sensors. In general the goals of the tasks proposed were to enhance competitiveness of U.S. technology, increase production of domestic resources, and reduce environmental

Integrating Quantitative and Qualitative Results in Health Science Mixed Methods Research Through Joint Displays.

Science.gov (United States)

Guetterman, Timothy C; Fetters, Michael D; Creswell, John W

2015-11-01

Mixed methods research is becoming an important methodology to investigate complex health-related topics, yet the meaningful integration of qualitative and quantitative data remains elusive and needs further development. A promising innovation to facilitate integration is the use of visual joint displays that bring data together visually to draw out new insights. The purpose of this study was to identify exemplar joint displays by analyzing the various types of joint displays being used in published articles. We searched for empirical articles that included joint displays in 3 journals that publish state-of-the-art mixed methods research. We analyzed each of 19 identified joint displays to extract the type of display, mixed methods design, purpose, rationale, qualitative and quantitative data sources, integration approaches, and analytic strategies. Our analysis focused on what each display communicated and its representation of mixed methods analysis. The most prevalent types of joint displays were statistics-by-themes and side-by-side comparisons. Innovative joint displays connected findings to theoretical frameworks or recommendations. Researchers used joint displays for convergent, explanatory sequential, exploratory sequential, and intervention designs. We identified exemplars for each of these designs by analyzing the inferences gained through using the joint display. Exemplars represented mixed methods integration, presented integrated results, and yielded new insights. Joint displays appear to provide a structure to discuss the integrated analysis and assist both researchers and readers in understanding how mixed methods provides new insights. We encourage researchers to use joint displays to integrate and represent mixed methods analysis and discuss their value. © 2015 Annals of Family Medicine, Inc.

Integrating Quantitative and Qualitative Results in Health Science Mixed Methods Research Through Joint Displays

Science.gov (United States)

Guetterman, Timothy C.; Fetters, Michael D.; Creswell, John W.

2015-01-01

PURPOSE Mixed methods research is becoming an important methodology to investigate complex health-related topics, yet the meaningful integration of qualitative and quantitative data remains elusive and needs further development. A promising innovation to facilitate integration is the use of visual joint displays that bring data together visually to draw out new insights. The purpose of this study was to identify exemplar joint displays by analyzing the various types of joint displays being used in published articles. METHODS We searched for empirical articles that included joint displays in 3 journals that publish state-of-the-art mixed methods research. We analyzed each of 19 identified joint displays to extract the type of display, mixed methods design, purpose, rationale, qualitative and quantitative data sources, integration approaches, and analytic strategies. Our analysis focused on what each display communicated and its representation of mixed methods analysis. RESULTS The most prevalent types of joint displays were statistics-by-themes and side-by-side comparisons. Innovative joint displays connected findings to theoretical frameworks or recommendations. Researchers used joint displays for convergent, explanatory sequential, exploratory sequential, and intervention designs. We identified exemplars for each of these designs by analyzing the inferences gained through using the joint display. Exemplars represented mixed methods integration, presented integrated results, and yielded new insights. CONCLUSIONS Joint displays appear to provide a structure to discuss the integrated analysis and assist both researchers and readers in understanding how mixed methods provides new insights. We encourage researchers to use joint displays to integrate and represent mixed methods analysis and discuss their value. PMID:26553895

77 FR 26069 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2012-05-02

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical Science Research and Development Services Scientific Merit Review Board, Notice of Meeting Amendment The... Development and Clinical Science Research and Development Services Scientific Merit Review Board have changed...

How much does PSA matter after 10 years? Outcomes in 10-year clinical NED survivors after definitive radiotherapy for T1-3N0M0 prostate cancer

International Nuclear Information System (INIS)

Johnstone, Peter A. S.; Powell, Curt; Riffenburgh, Robert; Saunders, Eric L.; Bethel, Kelly J.; Huisman, Thomas

1996-01-01

Objective: Institutional policy in the 1970's and 80's dictated that patients with potentially curable prostate cancer undergo PLND prior to definitive XRT. Our group has reported 80% 15-year actuarial cause-specific survival for the 147 patients so treated. Analysis was made of PSA values and clinical outcomes of patients who were clinically without evidence of disease (NED) 10 years after a negative staging pelvic lymphadenectomy and definitive radiation therapy (XRT) for prostate cancer. Materials and Methods: One hundred patients underwent staging pelvic lymphadenectomy between 11/1/74 and 1/1/86, of which 98 had pathologically negative lymph nodes (N 0 ). These patients subsequently underwent definitive radiotherapy; a median dose of 66.6 Gy (range 63-70.2 Gy) was delivered. Forty-two N 0 patients with sufficient follow-up were alive and clinically NED 10 years post-operatively. None of these patients had ever received hormonal therapy. Distribution by disease stage at diagnosis was: Stage A2: 12 pts; Stage B: 19 pts; Stage B2/ C: 6 pts; Stage C: 5 pts. Median follow-up was 12 years 4 months, with a minimum follow-up of 10 years. Results: Of the 42 NED survivors at 10 years, 5 pts died subsequently without PSA data, remaining clinically NED (median 13y 3m post-operatively); 37 patients were alive and without evidence of disease off all therapy at 10 years post-operatively. Most recent PSA data reveal: Bone scans were performed on the 8 patients with elevated PSA. These revealed a single patient with diffuse but asymptomatic bone metastases. Ultrasound-guided sextant biopsies were performed on one 78-year-old patient with elevated PSA 19 years post-operatively, revealing an asymptomatic local recurrence. Conclusions: Radiation therapy delivered to a surgically staged population of prostate cancer patients contributes to normalization of PSA in 78% ((29(37))) of patients with ≥10 year follow-up. Most of these patients will have PSA levels ≤ 1.5 ng/ml. More

Future Research Opportunities in Peri-Prosthetic Joint Infection Prevention.

Science.gov (United States)

Berbari, Elie; Segreti, John; Parvizi, Javad; Berríos-Torres, Sandra I

Peri-prosthetic joint infection (PJI) is a serious complication of prosthetic joint arthroplasty. A better understanding and reversal of modifiable risk factors may lead to a reduction in the incidence of incisional (superficial and deep) and organ/space (e.g., PJI) surgical site infections (SSI). Recently, the Centers for Disease Control and Prevention (CDC) and the Healthcare Infection Control Practices Advisory Committee (HICPAC) published the Guideline for Prevention of Surgical Site Infection. This targeted update applies evidence-based methodology in drafting recommendations for potential strategies to reduce the risk of SSI both across surgical procedures and specifically in prosthetic joint arthroplasty. A panel of PJI content experts identified nine PJI prevention research opportunities based on both evidence gaps identified through the guideline development process (transfusion, immunosuppressive therapy, anticoagulation, orthopedic space suit, and biofilm) and expert opinion (anesthesia, operative room environment, glycemic control, and Staphylococcus aureus nasal screening and decolonization. This article offers a road map for PJI prevention research.

Stochastic semi-nonparametric frontier estimation of electricity distribution networks: Application of the StoNED method in the Finnish regulatory model

International Nuclear Information System (INIS)

Kuosmanen, Timo

2012-01-01

Electricity distribution network is a prime example of a natural local monopoly. In many countries, electricity distribution is regulated by the government. Many regulators apply frontier estimation techniques such as data envelopment analysis (DEA) or stochastic frontier analysis (SFA) as an integral part of their regulatory framework. While more advanced methods that combine nonparametric frontier with stochastic error term are known in the literature, in practice, regulators continue to apply simplistic methods. This paper reports the main results of the project commissioned by the Finnish regulator for further development of the cost frontier estimation in their regulatory framework. The key objectives of the project were to integrate a stochastic SFA-style noise term to the nonparametric, axiomatic DEA-style cost frontier, and to take the heterogeneity of firms and their operating environments better into account. To achieve these objectives, a new method called stochastic nonparametric envelopment of data (StoNED) was examined. Based on the insights and experiences gained in the empirical analysis using the real data of the regulated networks, the Finnish regulator adopted the StoNED method in use from 2012 onwards.

Cross-border submarine energy networks. A few treaty legal considerations in the construction of the BBL and the NorNed

International Nuclear Information System (INIS)

Roggenkamp, M.M.

2005-01-01

On 21 March 2005 the United Kingdom and the Netherlands entered into an agreement regarding the construction and use of a gas interconnector between Balgzand in the Netherlands and Bacton in the United Kingdom. It is expected that the Balgzand Bacton Line (BBL) will come on stream in 2006/2007. Currently, two other interconnectors are being developed. It concerns an electricity interconnector between Norway and the Netherlands (NorNed) and another electricity interconnector between Great Britain and the Netherlands (BritNed). By contrast to the BBL, it seems that these electricity interconnectors will not be based on a bilateral agreement.This article examines the background and reasons for applying such a treaty. It describes the extent to which States have jurisdiction over international pipelines. More particularly it analyses coastal states' jurisdiction in the territorial sea, on the continental shelf and EEZ and its consequences for offshore cables and pipelines. Subsequently, the article provides some insight in State practice as it presents the key issues of existing treaties applying to pipelines and gas interconnectors in the North Sea area. Finally, the impact on electricity interconnectors will be discussed [nl

Report of the research results with joint-use facilities in fiscal year 1977

International Nuclear Information System (INIS)

1978-01-01

In the Nuclear Engineering Research Laboratory, the University of Tokyo, fast neutron source reactor 'Yayoi', linac and fusion-reactor blanket facility are jointly used by educational institutions. Research results from the joint uses of the facilities in fiscal 1977 are presented in individual summaries: (on-pile) irradiation, reactor physics and engineering, etc., (off-pile) equipment and component techniques, etc., (linac) operation, etc., with these joint uses, unique works are intended in resonable way. (Mori, K.)

Joint Research on Scatterometry and AFM Wafer Metrology

NARCIS (Netherlands)

Bodermann, B.; Buhr, E.; Danzebrink, H.U.; Bär, M.; Scholze, F.; Krumrey, M.; Wurm, M.; Klapetek, P.; Hansen, P.E.; Korpelainen, V.; Van Veghel, M.; Yacoot, A.; Siitonen, S.; El Gawhary, O.; Burger, S.; Saastamoinen, T.

2011-01-01

Supported by the European Commission and EURAMET, a consortium of 10 participants from national metrology institutes, universities and companies has started a joint research project with the aim of overcoming current challenges in optical scatterometry for traceable linewidth metrology. Both

Determination of effective university-industry joint research for photovoltaic technology transfer (UIJRPTT) in Thailand

International Nuclear Information System (INIS)

Sugandhavanija, Pornpimol; Sukchai, Sukruedee; Ketjoy, Nipon; Klongboonjit, Sakol

2011-01-01

Most of the literatures related to university-industry (U-I) and technology transfer assume that the collaboration particularly the U-I joint research is beneficial to both university and industry which as a result underpins the sustainable development of economics and living standards of developed and developing countries. The U-I joint research for photovoltaic technology transfer in a developing country like Thailand should have been increased considering the fact that (i) the government implemented various strategies to support the renewable energy research and market development, (ii) the university aimed to be ''research-based university and (iii) the Thai photovoltaic industry struggle for competitiveness and survival in the global market. However, evidence revealed that the university and industry conducted little number of U-I joint projects. In this paper, we investigate the factors influencing the effective U-I joint research for photovoltaic technology transfer (UIJRPTT). In an attempt to better understand the influence of the factors, the path model with factors related to characteristics and perspectives of the university and the industry as well as joint research mechanism and their linkages to higher growth and improved economic and quality performance of the U-I joint research is developed and validated. The developed model empirically explains interaction between the factors and the outcome factors and can assist the government, the university and the industry to devise target strategies to improve the growth and performance of UIJRPTT. (author)

FAA/NASA Joint University Program for Air Transportation Research, 1992-1993

Science.gov (United States)

Morrell, Frederick R. (Compiler)

1994-01-01

The research conducted during the academic year 1992-1993 under the FAA/NASA sponsored Joint University Program for Air Transportation Research is summarized. The year end review was held at Ohio University, Athens, Ohio, 17-18 June 1993. The Joint University Program is a coordinated set of three grants sponsored by the Federal Aviation Administration and NASA Langley Research Center, one each with the Massachusetts Institute of Technology, Ohio University, and Princeton University. Completed works, status reports, and annotated bibliographies are presented for research topics, which include navigation, guidance, and control theory and practice, aircraft performance, human factors and air traffic management. An overview of the year's activities for each university is also presented.

University Research and Development Activities: The Federal Income Tax Consequences of Research Contracts, Research Subsidiaries and Joint Ventures.

Science.gov (United States)

Kertz, Consuelo Lauda; Hasson, James K., Jr.

1986-01-01

Features of the federal income tax law applying to income received from commercially funded university-based scientific research and development activities are discussed, including: industry-sponsored research contracts, separately incorporated entities, partnerships and joint ventures, subsidiaries and unrelated income consequences of…

Joint Research Centre. Ispra establishment-Italy

International Nuclear Information System (INIS)

Angelini, Antonio

1976-01-01

A comprehensive review of the work carried out during 1974 and 1975 in the Ispra establishment of the Joint Research Centre is presented. A description of the activity carried out within the context of the running programmes is given. Some of the most relevant scientific and technical achievement are described from the viewpoints of the Scientific Departments of the Centre. The technical and administrative support activities are also presented. A list of publications issued by the Ispra Scientific staff is given

Annual report of the research works with joint-use JAERI facilities for fiscal 1974

International Nuclear Information System (INIS)

1975-01-01

Results of the research works by national universities with JAERI's (Japan Atomic Energy Research Institute) joint-use facilities for fiscal 1974 are described. Facilities are research reactors, Co-60, Linac, etc. Research results are presented in individual summaries, covering radiation damage and solid state physics, activation analysis and nuclear chemistry, irradiation effects, etc. Results of the joint works with JAERI are also presented similarly. (Mori, K.)

Proceedings of the joint meeting of ultrafast pulse high intensity laser research collaboration and JAEA-KPSI 7th symposium on advanced photon research

International Nuclear Information System (INIS)

2007-03-01

The Joint Meeting of Ultrafast Pulse High Intensity Laser Research Collaboration and JAEA-KPSI 7th Symposium on Advanced Photon Research was jointly held at Kansai Photon Research Institute, Japan Atomic Energy Agency (JAEA-KPSI) in Kizu, Kyoto on May 10-12, 2006. This report consists of contributed papers for the speeches and poster presentations including joint research and cooperative research performed in FY2004 and FY2005 with Japan Atomic Energy Research Institute (JAERI). The 47 of the presented papers are indexed individually. (J.P.N.)

FAA/NASA Joint University Program for Air Transportation Research: 1993-1994

Science.gov (United States)

Hueschen, Richard M. (Compiler)

1995-01-01

This report summarizes the research conducted during the academic year 1993-1994 under the NASA/FAA sponsored Joint University Program for Air Transportation Research. The year end review was held at Ohio University, Athens, Ohio, July 14-15, 1994. The Joint University Program is a coordinated set of three grants sponsored by NASA Langley Research Center and the Federal Aviation Administration, one each with the Massachusetts Institute of Technology (NGL-22-009-640), Ohio University (NGR-36-009-017), and Princeton University (NGL-31-001-252). Completed works, status reports, and annotated bibliographies are presented for research topics which include navigation, guidance and control theory and practice, aircraft performance, human factors, and expert systems concepts applied to aircraft and airport operations. An overview of the year's activities for each university is also presented.

Equivalent 5-year bNED in select prostate cancer patients managed with surgery or radiation therapy despite exclusion of the seminal vesicles from the CTV

International Nuclear Information System (INIS)

D'amico, Anthony V.; Whittington, Richard; Kaplan, Irving; Beard, Clair; Schultz, Delray; Malkowicz, S. Bruce; Tomaszewski, John E.; Wein, Alan; Coleman, C. Norman

1997-01-01

Purpose: Prostate Specific Antigen (PSA) failure free survival was determined for select prostate cancer patients managed definitively with external beam radiation therapy to the prostate only or radical retropubic prostatectomy. Methods and Materials: A logistic regression multivariable analysis evaluating the variables of PSA, biopsy Gleason score, and clinical stage was used to evaluate the endpoint of pathologic seminal vesicle invasion (SVI) in 749 consecutive prostate cancer patients managed with a radical retropubic prostatectomy. In a subgroup of 332 surgically and 197 radiation managed patients who did not have the clinical predictors of SVI, PSA failure free survival (bNED) was determined. Comparisons were made using the log rank test between surgically and radiation managed patients in this subgroup. In this subgroup, radiation managed patients were treated to a median dose of 66 Gy (66-70 Gy) to the prostate only. Results: The pretreatment PSA (> 10 ng/ml), biopsy Gleason score (≥7), and clinical stage (T2b, 2c, or 3) were found to be significant independent predictors (p < 0.001) of SVI. Only 2% of patients without any of these factors had SVI and 17% had extracapsular extension (15% microscopic; 2% macroscopic). In this subgroup the 5-year bNED rates were equivalent [84 vs. 89% (p = 0.67)] for surgically and radiation managed patients, respectively. Conclusions: Conventional dose external beam radiation therapy directed at the prostate alone resulted in 5-year bNED rates equivalent to surgery on retrospective comparison in patients with clinical stage T1,2a, PSA ≤ 10 ng/ml, and biopsy Gleason ≤ 6 prostate cancer

Nuclear safety research at the European Commission's Joint Research Centre

International Nuclear Information System (INIS)

Toerroenen, K.

2003-01-01

Nuclear power plants currently generate some 35 % of electricity used in the European Union and applicant countries. Nuclear safety will therefore remain a priority for the EU, particularly in view of enlargement, the need to monitor ageing nuclear installations and the licencing of advanced new reactor systems. The European Commission's Joint Research Centre (JRC), with its long involvement and recognised competence in nuclear safety related activities, provides direct support to the European Commission services responsible for nuclear safety and civil protection. (author)

The development of NEdSERV: quantitative instrumentation to measure service quality in nurse education.

Science.gov (United States)

Roberts, P

1999-07-01

The political climate of health care provision and education for health care in the latter years of the 20th century is evolving from the uncertainty of newly created markets to a more clearly focused culture of collaboration, dissemination of good practice, with an increased emphasis on quality provision and its measurement. The need for provider units to prove and improve efficiency and effectiveness through evidence-based quality strategies in order to stay firmly in the market place has never been more necessary. The measurement of customer expectations and perceptions of delivered service quality is widely utilized as a basis for customer retention and business growth in both commercial and non-profit organizations. This paper describes the methodological development of NEdSERV--quantitative instrumentation designed to measure and respond to ongoing stakeholder expectations and perceptions of delivered service quality within nurse education.

Estimation of the forces acting on the tibiofemoral joint during knee extension exercises

Directory of Open Access Journals (Sweden)

Rodrigo Rico Bini

2008-02-01

Full Text Available http://dx.doi.org/10.5007/1980-0037.2008v10n1p35 The objectives of this study were to: (1 evaluate the resistive torque of an open kinetic chain strength-training machine for performing knee extensions, and (2 perform an analysis estimating internal forces in the tibiofemoral joint. During a fi rst phase of the study, measurements were taken of the machine under analysis (external forces, and then calculations were performed to estimate forces on the lower limb (internal forces. Equations were defi ned to calculate human force (HF, and the moment of muscular force (MMF. Perpendicular muscular force (MFp and joint force (JFp, axial muscular force (MF” and joint force (JF”, and total muscular force (MF and joint force (JF were all calculated. Five knee angles were analyzed (zero, 30, 45, 60, and 90 degrees. A reduction was observed in HF at higher knee angles, while MF and JF also increased at the same time. HF was always lower than the load selected on the machine, which indicates a reduced overload imposed by the machine. The reduction observed in MFp and JFp at higher knee angles indicates a lower tendency to shear the tibia in relation to the femur. At the same time, there was an increase in JF” due to higher MF”. The biomechanical model proposed in this study has shown itself adequate for the day-to-day needs of professionals who supervise orient strength training.

Report of the workshop for searching future direction of INS-LBL joint research

International Nuclear Information System (INIS)

1983-06-01

The workshop for searching the future direction of INS-LBL joint research was held from January 10 to 12, 1983, In Hakone. The Japan-USA joint experiment was started seven years ago at the Bevalac in the Lawrence Berkeley Laboratory, and four years have elapsed since the beginning of INS-LBL joint research. The five-year program of the INS-LBL joint research will end in the spring of 1984, therefore the progress and the results are reviewed, and the policy taken hereafter is reconsidered. The past ten years can be divided into two periods, and in the first period, the release of light particles from the core reaction of heavy ions was taken up. In the second period, the precise measurement of particle correlation and the study on rare events were the main subjects. The five-year program mentioned above was organized in the second period. The results obtained have been internationally evaluated high. Recently, the beam of heavy nuclei such as Xe and U has become to be accelerated by the Bevalac. It was proposed to shift to the nuclear physics of new isotopes from 1984 on. (Kako, I.)

International joint research of medical and walfare appliances; Iryo fukushi kiki kokusai kyodo kenkyu jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

To further elevate the medical level and to actively enhance Japan`s contribution to the world in its effort to properly meet the task of advancing longevity of men common to all the advanced countries, investigations were made to study how international joint research should be conducted in the field of medical and welfare appliances. Candidate projects in international joint research and investigations up to fiscal 1993 were arranged, and explanation was made about the strategic and long-term research and development projects (started in fiscal 1995) about medical and welfare appliances undertaken by the Ministry of Trade and Industry of Japan. The two are quite similar to each other, the Ministry of Trade and Industry program comprising six projects that are micropores collection of blood/microdose analysis, high precision three dimensional image assisted diagnosis, less invasive surgery, artificial organs, care assisting intelligent equipment, and welfare equipment for care at home, centering about which international joint research should be propelled. Visits were made to the scenes of research and development of advanced medical and welfare appliances in the U.S. and Canada and their actual state was studied in search for possible joint researches. Further, research and development institutions in Europe were visited and information was exchanged. 25 figs., 15 tabs.

The Determinants of National Funding in Trans-national Joint Research: Exploring the Proximity Dimensions

Energy Technology Data Exchange (ETDEWEB)

Reale, E.; Spinello, A.; Zinilli, A.

2016-07-01

This paper investigates -using an explorative approach, why policy makers at national level engage in transnational joint research activities and mobilize dedicated financial resources. The research question is: why policy makers (either Governments or Research Funding Organisations-RFOs) in EU28 countries invest in transnational joint research activities beyond the European Framework Programmes, and what are the determinants of different levels of funding engagement? The question is relevant to understand the reasons that generate the existing imbalances within European countries as to the participation in transnational research, which are likely to create peripheries within the ERA, thus undermining the process of European integration. We assume that proximity linked to cognitive, institutional and organizational dimensions can affect the policy decisions about the level of funding (real engagement) joint European research programmes, because the closeness or distance in these dimensions generate similarities that are likely to influence the possibility of decision makers to collaborate in the implementation of research programmes. The paper also explores the existence of any effect of geographical proximity, although it is not supposed to play a role in policy decisions about investment in transnational research programmes. (Author)

Call for proposals for the Joint Canada-Israel Health Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

23 nov. 2017 ... Call for proposals for the Joint Canada-Israel Health Research Program 2018 competition ... developmental neurobiology; neuro-immunology; neuroendocrinology; regenerative medicine in brain disease; cellular and molecular basis of cognition; modeling brain function; imaging of neural processes ...

International joint research of the Danube radioactivity

International Nuclear Information System (INIS)

Szerbin, P.; Szabo, G.; Guczi, J.; Koblinger-Bokori, E.; Kurtacs, E.; Dovlete, C.; Ruzsa, G.; Major, V.; Maringer, F.J.

1998-01-01

A PHARE (Poland Hungary Aid for Reconstruction of Economy) subsidized study was initiated in 1995 with coordination of Vituki Innosystem (Hungary) and with participation of Austrian, Romanian, and Hungarian research institutes to reveal and investigate in detail hot spots of radioactivity and sources of contamination in the Danube catchment area. The general objective of the project was to assess whether or not potential upstream radionuclide sources in the countries in the upper part of the Danube basin have resulted in evidential downstream accumulation of radionuclides and have a potential impact into the Black sea contamination. The presentation summarizes the results of the international joint research study, and some other data obtained in the framework of cooperation between monitoring institutes of the riparian states

Joint Research on Scatterometry and AFM Wafer Metrology

OpenAIRE

Bodermann, B.; Buhr, E.; Danzebrink, H.U.; Bär, M.; Scholze, F.; Krumrey, M.; Wurm, M.; Klapetek, P.; Hansen, P.E.; Korpelainen, V.; Van Veghel, M.; Yacoot, A.; Siitonen, S.; El Gawhary, O.; Burger, S.

2011-01-01

Supported by the European Commission and EURAMET, a consortium of 10 participants from national metrology institutes, universities and companies has started a joint research project with the aim of overcoming current challenges in optical scatterometry for traceable linewidth metrology. Both experimental and modelling methods will be enhanced and different methods will be compared with each other and with specially adapted atomic force microscopy (AFM) and scanning electron microscopy (SEM) m...

CONCERT. ''European joint programme for the integration of radiation protection research''

International Nuclear Information System (INIS)

Schmitt-Hannig, A.; Birschwilks, M.; Jung, T.

2016-01-01

CONCERT is a joint project of the EU and its member states which assume joint financing: Over the next five years the largest European radiation protection programme so far will have available about 28 Million Euros for research and integrative measures, whereby the European Commission will bear 70 per cent of the costs. Integrative measures include, among others, targeted vocational education and training of junior researchers in radiation protection, better access to research and irradiation facilities for scientists, as well as a stronger connection of universities and research centres in radiation protection research.

arXiv Falsifying cosmological models based on a non-linear electrodynamics

CERN Document Server

Övgün, Ali; Magaña, Juan; Jusufi, Kimet

Recently, the nonlinear electrodynamics (NED) has been gaining attention to generate primordial magnetic fields in the Universe and also to resolve singularity problems. Moreover, recent works have shown the crucial role of the NED on the inflation. This paper provides a new approach based on a new model of NED as a source of gravitation to remove the cosmic singularity at the big bang and explain the cosmic acceleration during the inflation era on the background of stochastic magnetic field. Also, we found a realization of a cyclic Universe, free of initial singularity, due to the proposed NED energy density. In addition, we explore whether a NED field without or with matter can be the origin of the late-time acceleration. For this we obtain explicit equations for $H(z)$ and perform a MCMC analysis to constrain the NED parameters by using $31$ observational Hubble data (OHD) obtained from cosmic chronometers covering the redshift range $0 < z < 1.97$; and with the joint-light-analysis (JLA) SNIa compil...

Long-Run Effects of Public-Private Research Joint Ventures:

DEFF Research Database (Denmark)

Kaiser, Ulrich; Kuhn, Johan Moritz

Subsidized research joint ventures (RJVs) between public research institutions and industry have become increasingly popular in Europe and the US. We study the long-run effects of such a support scheme that has been maintained by the Danish government since 1995. To cope with identification...... problems we apply nearest neighbor caliper matching and conditional difference-in-difference estimation methods. Our main findings are that (i) program participation effects are instant for annual patent applications and last for three years, (ii) employment effects materialize first after one year...

Research on decommissioning of nuclear facilities 2. Study on optimum scenario using the AHP (Joint research)

International Nuclear Information System (INIS)

Shibahara, Yuji; Morishita, Yoshitsugu; Ishigami, Tsutomu; Yanagihara, Satoshi; Arita, Yuji

2013-01-01

To implement a decommissioning project reasonably, it is necessary and important to calculate project management data beforehand as well as to select an optimum dismantling scenario among various scenarios postulated. Little study on the subject of selecting an optimum scenario has been carried out, and it is one of the most important issues in terms of decision making. In FY 2009, Japan Atomic Energy Agency and University of Fukui launched the joint research of a decision making method which is important to determine a decommissioning plan. The purpose of this research is to formulate a methodology for selecting an optimum dismantling scenario among various scenarios postulated based on calculated results of project management data for FUGEN. Project management data for several dismantling scenarios postulated at FUGEN were evaluated based on actual dismantling work for feedwater heater at FUGEN, and an optimum scenario was discussed using the AHP, one of Multi-Criteria Decision Analysis Methods. This report describes the results of the joint research in FY 2010. (author)

Joint Institute for Nuclear Research Exhibition Science Bringing Nations Together

CERN Multimedia

2000-01-01

The JOINT INSTITUTE FOR NUCLEAR RESEARCH, JINR, was established by its founding countries in 1956 with the purpose of joining together the scientific and material potential of Member States in studies of the fundamental properties of matter. JINR is an international inter-governmental scientific research organization, whose activities are based on the principles of openness for participation to all interested states and of their equal, mutually beneficial collaboration.

Joint Institute for Nuclear Research Exhibition Science Bringing Nations Together

CERN Multimedia

1999-01-01

The JOINT INSTITUTE FOR NUCLEAR RESEARCH, JINR, was established by its founding countries in 1956 with the purpose of joining together the scientific and material potential of Member States in studies of the fundamental properties of matter. JINR is an international inter-governmental scientific research organization, the activities of which are based on the principles of openness for participation to all interested states of their equal, mutually beneficial collaboration.

Research Status and Feasibility Analysis on the Participation in International Joint Studies for Radionuclide and Colloid Migration Using Foreign Underground Research Facilities

Energy Technology Data Exchange (ETDEWEB)

Baik, Min Hoon; Park, Chung Kyun; Lee, Jae Kwang; Choi, Jong Won

2007-12-15

The research status of the potential international joint projects that we can join were analyzed by investigating world-wide underground research facilities. Based upon the investigations, we visited Aspo in Sweden and GTS in Switzerland, discussed about the participation in the international joint projects and mutual cooperation, and then discussed in detail about time and method for the participation by inviting an expert from Nagra. It is resulted from the investigations and discussions that it is most relevant to participate in the following two international joint projects. 1) Task Force on Modelling of Groundwater Flow and Transport of Solutes in Aspo, 2) CFM project in GTS. We also summarized the on-going current status for the participation in the two international joint projects.

Establishment of cooperation basis of joint research on the mixed waste molten salt oxidation technology

International Nuclear Information System (INIS)

Yang, Hee Chul; Cho, Y. J.; Kim, J. H.; Yoo, J. H.; Yun, H. C.; Lee, D. G.

2005-08-01

Molten salt oxidation, MSO for short, is a robust technology that can effectively treat mixed waste (radioactive waste including hazardous metals or organics). It can safely and economically treat the difficult wastes such as not-easily destroyable toxic organic waste, medical waste, chemical warfare and energetic materials such as propellant and explosives, all of which are not easily treated by an incinerator or other currently existing thermal treatment system. Therefore, molten salt oxidation technology should be developed and utilized to treat a lot of niche waste stored in the nuclear and environmental industries. So, if we put the MSO technology to practical use by Korea-Vietnam joint research, we can reduce R and D fund for MSO technology by ourselves and we can expect an export of the outcome of nuclear R and D in Korea. For Establishment of cooperation basis of joint research concerning molten salt oxidation technology between KOREA and VIETNAM, in this research, We invited two Vietnamese researchers and we introduced our experimental scale molten salt oxidation system in order to let them understand molten salt oxidation technology. We also visited Viet man and we consulted about molten salt oxidation process. We held seminar on the mixed waste molten salt oxidation technology, discussed on the joint research on the mixed waste molten salt oxidation technology and finally we wrote MOU for joint research

Establishment of cooperation basis of joint research on the mixed waste molten salt oxidation technology

Energy Technology Data Exchange (ETDEWEB)

Yang, Hee Chul; Cho, Y. J.; Kim, J. H.; Yoo, J. H.; Yun, H. C.; Lee, D. G

2005-08-01

Molten salt oxidation, MSO for short, is a robust technology that can effectively treat mixed waste (radioactive waste including hazardous metals or organics). It can safely and economically treat the difficult wastes such as not-easily destroyable toxic organic waste, medical waste, chemical warfare and energetic materials such as propellant and explosives, all of which are not easily treated by an incinerator or other currently existing thermal treatment system. Therefore, molten salt oxidation technology should be developed and utilized to treat a lot of niche waste stored in the nuclear and environmental industries. So, if we put the MSO technology to practical use by Korea-Vietnam joint research, we can reduce R and D fund for MSO technology by ourselves and we can expect an export of the outcome of nuclear R and D in Korea. For Establishment of cooperation basis of joint research concerning molten salt oxidation technology between KOREA and VIETNAM, in this research, We invited two Vietnamese researchers and we introduced our experimental scale molten salt oxidation system in order to let them understand molten salt oxidation technology. We also visited Viet man and we consulted about molten salt oxidation process. We held seminar on the mixed waste molten salt oxidation technology, discussed on the joint research on the mixed waste molten salt oxidation technology and finally we wrote MOU for joint research.

Long-Run Effects of Public–Private Research Joint Ventures

DEFF Research Database (Denmark)

Kaiser, Ulrich; Kuhn, Johan Moritz

2012-01-01

Subsidized research joint ventures (RJVs) between public research institutions and industry have become increasingly popular in Europe and the US. We study the long-run effects of such a support scheme that has been maintained by the Danish government since 1995. To cope with identification...... problems we apply nearest neighbor matching and conditional difference-in-difference estimation methods. Our main findings are that (i) program participation effects are instant for annual patent applications and last for three years, (ii) employment effects materialize first after one year and (iii...

The accelerators of the Joint Institute for Nuclear Research at Dubna

International Nuclear Information System (INIS)

Kuehn, B.

1981-01-01

History, state-of-the-art, and the planned development of the high-energy and heavy-ion accelerators at the Joint Institute for Nuclear Research at Dubna are reviewed. Data on the particle beams available at present and in the future are given. (author)

Joint DOE-PNC research on the use of transparency in support of Nuclear Nonproliferation

International Nuclear Information System (INIS)

Mochiji, Toshiro; Tazaki, Makiko; Keeney, Robin; Puckett, John; Stanbro, William; Nakhleh, Charles

1998-01-01

PNC and LANL collaborated in research on the concept of transparency in nuclear nonproliferation. The research was based on the Action Sheet no.21, which was signed in February 1996, 'The Joint Research on 'Transparency' in Nuclear Nonproliferation' under the 'Agreement between the Power Reactor and Nuclear Fuel Development Corporation of Japan (PNC) and the US Department of Energy (DOE) for Cooperation in Research and Development Concerning Nuclear Material Control and Accounting Measures for Safeguards and Nonproliferation.' The scope of the research was a fundamental study on transparency to clarify the means to improve worldwide acceptability of nuclear energy from a nuclear nonproliferation viewpoint. The research encompassed three main topics: the policy environment of transparency, the development of transparency options, and technical options for transparency. Each side performed independent research then joint workshops were held to exchange information and views. This paper summarizes the results of these workshops. (author)

Japan-EU joint research project on petroleum substituting energy; Nichi EU sekiyu daitai energy kanren kyodo kenkyu jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Four EU research workers were invited from Portugal, Italy and France for promoting R & D of petroleum substituting energies in Japan. The joint research on the wide area energy use network system (advanced district cooling and heating) includes the experimental technology for measuring heat transfer acceleration and drag reduction, evaluation of rheological characteristics of fluid, and development and selection of an adequate composition equation of fluid. The joint research on MCFC includes the test method and procedure of components and cells in relation to corrosion by molten carbonate, elution of NiO cathodes, electrode modeling and alternative materials for cathodes. The joint research on geothermal gases includes the research method of fumarolic gases such as volcanic gas and geothermal gas, applications in Italian geothermal fields and the relation of geothermal gases with the origin of fluid, deep conditions and volcanic activity. In addition, the joint research on light energy conversion (energy transfer system between binuclear metal complexes) and the performance and use of metal complexes as catalyst for polymer electrolyte fuel cells was also performed. 52 refs., 20 figs., 3 tabs.

Contours, This Layer was derived from the USGS National Elevation Dataset (NED) based on 7.5 minute Digital Elevation Model (DEM) image files., Published in 1999, 1:24000 (1in=2000ft) scale, Atlanta Regional Commission.

Data.gov (United States)

NSGIC Regional | GIS Inventory — Contours dataset current as of 1999. This Layer was derived from the USGS National Elevation Dataset (NED) based on 7.5 minute Digital Elevation Model (DEM) image...

Optimization of the heat treatment schedule for next european dipole (NED) powder in tube $Nb_{3}Sn$ strand

CERN Document Server

Boutboul, T; den Ouden, A; Pedrini, D; Volpini, G

2009-01-01

A Nb3Sn strand was successfully developed by the company SMI for Next European Dipole (NED) activity and on the basis of Powder-In-Tube (PIT) method. This strand, after the standard reaction recommended by the firm (84 h @ 675 oC), presents attractive performances as a critical current density in the non-copper part of ~ 2500 A/mm2 for 4.2 K and 12 T applied field, an effective filament diameter of ~ 50 μm and limited flux jumps at low magnetic fields. Heat treatment optimization studies are currently performed at CERN to try to optimize the strand electric abilities. For this purpose, various heat treatment schedules were already investigated with a plateau temperature as low as 625 oC. The preliminary results of these studies are summarized here.

FAA/NASA Joint University Program for Air Transportation Research 1994-1995

Science.gov (United States)

Remer, J. H.

1998-01-01

The Joint University Program for Air Transportation Research (JUP) is a coordinated set of three grants co-sponsored by the Federal Aviation Administration (FAA) and the National Aeronautics and Space Administration (NASA). Under JUP, three institutions: the Massachusetts Institute of Technology, Princeton, and Ohio Universities receive research grants and collaborate with FAA and NASA in defining and performing civil aeronautics research in a multitude of areas. Some of these disciplines are artificial intelligence, control theory, atmospheric hazards, navigation, avionics, human factors, flight dynamics, air traffic management, and electronic communications.

The joint center for energy storage research: A new paradigm for battery research and development

International Nuclear Information System (INIS)

Crabtree, George

2015-01-01

The Joint Center for Energy Storage Research (JCESR) seeks transformational change in transportation and the electricity grid driven by next generation high performance, low cost electricity storage. To pursue this transformative vision JCESR introduces a new paradigm for battery research: integrating discovery science, battery design, research prototyping and manufacturing collaboration in a single highly interactive organization. This new paradigm will accelerate the pace of discovery and innovation and reduce the time from conceptualization to commercialization. JCESR applies its new paradigm exclusively to beyond-lithium-ion batteries, a vast, rich and largely unexplored frontier. This review presents JCESR's motivation, vision, mission, intended outcomes or legacies and first year accomplishments

The joint center for energy storage research: A new paradigm for battery research and development

Energy Technology Data Exchange (ETDEWEB)

Crabtree, George [Joint Center for Energy Storage Research, Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439, USA and University of Illinois at Chicago, 845 W. Taylor Street, Chicago, IL 60607 (United States)

2015-03-30

The Joint Center for Energy Storage Research (JCESR) seeks transformational change in transportation and the electricity grid driven by next generation high performance, low cost electricity storage. To pursue this transformative vision JCESR introduces a new paradigm for battery research: integrating discovery science, battery design, research prototyping and manufacturing collaboration in a single highly interactive organization. This new paradigm will accelerate the pace of discovery and innovation and reduce the time from conceptualization to commercialization. JCESR applies its new paradigm exclusively to beyond-lithium-ion batteries, a vast, rich and largely unexplored frontier. This review presents JCESR's motivation, vision, mission, intended outcomes or legacies and first year accomplishments.

Report on surveys and researches to excavate international joint researches related to industrial technologies; Sangyo gijutsu ni kansuru kokusai kyodo kenkyu hakkutsu no tame no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Five themes were taken up for a project of the 'surveys and researches to excavate international joint researches related to industrial technologies'. Investigation groups were organized and dispatched for each theme toperform domestic and overseas surveys. Discussions were given on eachtheme for the possibilities of structuring international joint researches. The five themes are as follows: 'wearable information network related technologies', wherein technologies to micronize information devices have been advanced rapidly, and the technologies are entering the age from personalizing and mobilizing the information into the wearable computing; this theme is intended to develop systems to unify these technologies by means of international joint researches: 'surveys on using unutilized animal oils and fats as chemical raw materials', which are intended to make clear possibilities and problems in utilizing animal oils and fats as raw materials for the chemical industry that can substitute fossil resources: 'international joint researches on new glasses' and 'processes to manufacture semiconductors using glassy carbon' to develop glassy carbon having excellent chemical resistance substituting quartz: and 'international joint researches on the Russian project which places environment and energy in its center'. (NEDO)

The report of joint research over 20 years of the Bulgarian Academy of Sciences and Hiroshima Institute of Technology

OpenAIRE

Tanaka,Takeshi; Vutova,Katia

2014-01-01

The Department of Electronics and Computer Engineering, Hiroshima Institute of Technology (EC-HIT) started the international joint research with the Laboratory “Physical Problems of Electron Beam technologies” of the Institute of Electronics, Bulgarian Academy of Sciences (IE-BAS) from 1994. 20 papers, included a book chapter, were published by implementing the international joint research under 5 Agreements for Academic Cooperation and Exchange between HIT and IEBAS. Our international joint ...

CONCERT-'European Joint Programme for the Integration at Radiation Protection Research'; CONCERT-''European Joint Programme for the Integration at Radiation Protection Research''

Energy Technology Data Exchange (ETDEWEB)

Birschwilks, Mandy; Schmitt-Hannig, Annemarie [Bundesamt fuer Strahlenschutz, Oberschleissheim (Germany). Internationale und Nationale Zusammenarbeit im Strahlenschutz; Jung, Thomas [Bundesamt fuer Strahlenschutz, Oberschleissheim (Germany). Strahlenschutz und Gesundheit

2016-08-01

In 2009 the High Level Expert Group (HLEG) on low dose research recommended the development of a scientific platform for low dose radiation research. The foundation of MELODI (Multidisciplinary European Low Dose Initiative) occurred in 2010. In 2015 a new project on radiation protection research was established: CONCERT (European Joint Programme for the Integration at Radiation Protection Research). The aim is the coordination of the already existing scientific platforms MELODI (radiation effects and interactions), ALLIANCE (radioecology), NERIS (nuclear and radiological emergency protection) and EURADOS (radiation dosimetry). With CONCERT an efficient use of this infrastructure for research cooperation and transparency is intended.

Biomimetic Spider Leg Joints: A Review from Biomechanical Research to Compliant Robotic Actuators

Directory of Open Access Journals (Sweden)

Stefan Landkammer

2016-07-01

Full Text Available Due to their inherent compliance, soft actuated joints are becoming increasingly important for robotic applications, especially when human-robot-interactions are expected. Several of these flexible actuators are inspired by biological models. One perfect showpiece for biomimetic robots is the spider leg, because it combines lightweight design and graceful movements with powerful and dynamic actuation. Building on this motivation, the review article focuses on compliant robotic joints inspired by the function principle of the spider leg. The mechanism is introduced by an overview of existing biological and biomechanical research. Thereupon a classification of robots that are bio-inspired by spider joints is presented. Based on this, the biomimetic robot applications referring to the spider principle are identified and discussed.

Reliability of agriculture universal joint shafts based on temperature measuring in universal joint bearing assemblies

Directory of Open Access Journals (Sweden)

Аleksandar Asonja

2015-03-01

Full Text Available This paper presents a research into reliability calculations of agriculture double universal joint shafts based on temperature measuring in cardan-type universal joint bearing assemblies. Special laboratory equipment was developed for this research which is presented in the paper. The objective of this research was to test the real life span of universal joint shafts in the laboratory and in field, to obtain the results which can be used to improve the reliability of universal joint shafts. If the presented research were used along with maintenance measures recommended in the paper and with proper use, the level of reliability of the shafts would be 2.1 times higher. The presented results of the research showed that needle bearings, i.e. bearing assemblies of the joints, are the most critical elements on universal joint shafts and are possible causes of their lower reliability. The second universal joint is the part with the lowest reliability in the observed technical system.

Brief of the joint research with universities, etc. for 2002. Except the research by the JNC cooperative research scheme on the nuclear fuel cycle

International Nuclear Information System (INIS)

2003-09-01

The Japan Nuclear Cycle Development Institute (JNC) promote the basic and fundamental research in relation to the research and development projects of JNC through collaboration with universities and other research institutes (referred to as 'universities, etc.' below). This report includes a summary of the results of the research carried out in fiscal year 2002 on 15 joint researches with universities, etc. In addition, this report removes the research by the JNC Cooperative Research Scheme on the Nuclear Fuel Cycle. (author)

Report of the second joint Research Committee for Fusion Reactor and Materials. July 12, 2002, Tokyo, Japan

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-05-01

Joint research committees in purpose of the discussion on DEMO blanket in view point of the both of reactor technology and materials were held by the Research Committee for Fusion Reactor and Fusion Materials. The joint research committee was held in Tokyo on July 12, 2002. In the committee, the present status of development of solid and liquid breeding blanket, the present status of development of reduced activation structure materials, and IFMIF (International Fusion Materials Irradiation Facility) program were discussed based on the discussions of the development programs of the blanket and materials at the first joint research committee. As a result, it was confirmed that high electric efficiency with 41% would be obtained in the solid breeding blanket system, that neutron radiation data of reduced activation ferritic steel was obtained by HFIR collaboration, and that KEP (key element technology phase) of IFMIF would be finished at the end of 2002 and the data base for the next step, i.e. EVEDA (engineering validation/engineering design activity) was obtained. In addition, the present status of ITER CTA, which was a transient phase for the construction, and the outline of ITER Fast Track, which was an accelerated plan for the performance of the power plants, were reported. This report consists of the summary of the discussion and the viewgraphs which were used at the second joint research committee, and these are very useful for the researchers of the fusion area in Japan. (author)

Evidence-based radiology (part 2): Is there sufficient research to support the use of therapeutic injections into the peripheral joints?

Energy Technology Data Exchange (ETDEWEB)

Peterson, Cynthia; Hodler, Juerg [Orthopaedic University Hospital of Balgrist, Radiology, Zuerich (Switzerland)

2010-01-15

This review article addresses the best evidence currently available for the effectiveness of injection therapy for musculoskeletal conditions involving the peripheral joints. The research is presented by anatomical region and areas of controversy and the need for additional research are identified. Randomized controlled trials, meta-analyses and systematic reviews are lacking that address the effectiveness of therapeutic injections to the sternoclavicular, acromioclavicular, ankle and foot joints. No research studies of any kind have been reported for therapeutic injections of the sternoclavicular joint. With the exception of the knee, possibly the hip and patients with inflammatory arthropathies, research does not unequivocally support the use of therapeutic joint injections for most of the peripheral joints, including the shoulder. Additionally, controversy exists in some areas as to whether or not corticosteroids provide better outcomes compared to local anesthetic injections alone. When viscosupplementation injections are compared to corticosteroids in patients with osteoarthritis of the knee, the evidence supports the use of viscosupplementation for more prolonged improvement in outcomes, with corticosteroids being good for short-term relief. (orig.)

Evidence-based radiology (part 2): Is there sufficient research to support the use of therapeutic injections into the peripheral joints?

International Nuclear Information System (INIS)

Peterson, Cynthia; Hodler, Juerg

2010-01-01

This review article addresses the best evidence currently available for the effectiveness of injection therapy for musculoskeletal conditions involving the peripheral joints. The research is presented by anatomical region and areas of controversy and the need for additional research are identified. Randomized controlled trials, meta-analyses and systematic reviews are lacking that address the effectiveness of therapeutic injections to the sternoclavicular, acromioclavicular, ankle and foot joints. No research studies of any kind have been reported for therapeutic injections of the sternoclavicular joint. With the exception of the knee, possibly the hip and patients with inflammatory arthropathies, research does not unequivocally support the use of therapeutic joint injections for most of the peripheral joints, including the shoulder. Additionally, controversy exists in some areas as to whether or not corticosteroids provide better outcomes compared to local anesthetic injections alone. When viscosupplementation injections are compared to corticosteroids in patients with osteoarthritis of the knee, the evidence supports the use of viscosupplementation for more prolonged improvement in outcomes, with corticosteroids being good for short-term relief. (orig.)

75 FR 14190 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Joint Venture To...

Science.gov (United States)

2010-03-24

... Production Act of 1993--Joint Venture To Perform Project Entitled Robotic Rehabilitation of Aging Water... Cooperative Research and Production Act of 1993, 15 U.S.C. 4301 et sect. (``the Act''), Joint [[Page 14191

Application of micro-PIXE and imaging technology to life science (Joint research)

International Nuclear Information System (INIS)

Satoh, Takahiro; Ishii, Keizo

2011-03-01

The joint research on 'Application of micro-PIXE and imaging technology to life science' supported by the Inter-organizational Atomic Energy Research Program, had been performed for three years, from 2006FY to 2009FY. Aiming to apply in-air micro-PIXE analytical system to life science, the research was consisting of 7 collaborative themes related to beam engineering for micro-PIXE and applied technology of element mapping in biological/medical fields. The system, so-called micro-PIXE camera, to acquire spatial element mapping in living cells was originally developed by collaborative research between the JAEA and the department of engineering of Tohoku University. This review covers these research results. (author)

Proceedings of the seminar on the joint research project between JAERI and Universities. 'Actinide researches for 21st century - fusion between chemistry and engineering'. August 20-21, 1999, Japan Atomic Energy Research Inst., Tokai, Japan

International Nuclear Information System (INIS)

2000-06-01

The Seminar on the Joint Research Project between JAERI and Universities was held in Tokai, August 20-21, 1999, to discuss future perspectives of the actinide researches for the nuclear fuel cycle. The papers related to the Joint Research Project on the Backend Chemistry were presented and discussed. The present report complies the papers contributed to the Seminar. (author)

Numerical/experimental research on welded joints in aluminium truss girders

NARCIS (Netherlands)

van Hove, B.W.E.M.; Soetens, F.; Mazzolani, F.M.; Bellucci, F.; Faggiano, B.; Squillace, A.

2016-01-01

Welded joints in a 30 meter span aluminium truss girder were investigated numerically and experimentally. Since aluminium design rules for welded K-and N-joints in CHS truss girders were lacking the joints were checked using steel design rules. Calculations showed that the N-joints were governing

Joint Institute for Nuclear Research as an example of socialist integration in science

International Nuclear Information System (INIS)

Bogolyubov, N.N.

1979-01-01

History of establishing, main directions of works and some results of investigations which have been carried out in the Joint Institute of Nuclear Research according to the program of the JINR member-states are stated as well as directions of the JINR co-operation with other countries are given. In detail, main works are stated in the field of high energy physics, theoretical nuclear physics, investigation of interactions of elementary particles, nuclear spectroscopy of nuclides. Examples are given of joint researches which have been conducted by scientists from the JINR together with scientists from other scientific research centers of the JINR member-states and other countries. Content is stated of works in the field of synthesis of ultraheavy elements and development of methods of study as their chemical properties. Composition of the JINR computer center is given as well as the list of problems which are solved at this center. Some results are given of works conducted in the JINR in the field of development of equipment for nuclear-physical researches and improvement of accelerators. Some results are presented of the JINR activity and plans for future [ru

Joint Research on Scatterometry and AFM Wafer Metrology

Science.gov (United States)

Bodermann, Bernd; Buhr, Egbert; Danzebrink, Hans-Ulrich; Bär, Markus; Scholze, Frank; Krumrey, Michael; Wurm, Matthias; Klapetek, Petr; Hansen, Poul-Erik; Korpelainen, Virpi; van Veghel, Marijn; Yacoot, Andrew; Siitonen, Samuli; El Gawhary, Omar; Burger, Sven; Saastamoinen, Toni

2011-11-01

Supported by the European Commission and EURAMET, a consortium of 10 participants from national metrology institutes, universities and companies has started a joint research project with the aim of overcoming current challenges in optical scatterometry for traceable linewidth metrology. Both experimental and modelling methods will be enhanced and different methods will be compared with each other and with specially adapted atomic force microscopy (AFM) and scanning electron microscopy (SEM) measurement systems in measurement comparisons. Additionally novel methods for sophisticated data analysis will be developed and investigated to reach significant reductions of the measurement uncertainties in critical dimension (CD) metrology. One final goal will be the realisation of a wafer based reference standard material for calibration of scatterometers.

Review of research on the hygrothermal environmental durability of structural adhesively bonded joints

Directory of Open Access Journals (Sweden)

Xiao HAN

2017-06-01

Full Text Available In recent years, structural adhesive bonding technology has been widely used in many industrial fields, with many advantages over traditional mechanical connection methods, such as riveting, welding and bolt connection. Due to the adhesive characteristics of polymer materials, the environmental durability of adhesive joint becomes the key problems in engineering structure connection feasibility and long-term service reliability. On the basis of the review of the research of the hot-humid environmental durability of structural adhesive joints, the effects of temperature, moisture and coupled condition on the structural mechanical behaviour are discussed, introducing the published research progress and results both at home and abroad. The prospects are provided: the future research work can be combined with a variety of observation scales of environmental aging test and numerical simulation method, delve into sub hygroscopic, creep, thermal expansion and hygroscopic expansion aging behavior, such as the environment of model prediction method simulation in more than a variety of mechanical performance degradation behavior of coupling conditions, and provide more reliable theoretical modeling and experimental data for engineering design and application of cementing structure.

CONCERT. ''European joint programme for the integration of radiation protection research''; CONCERT. Gemeinsame Europaeische Forschungsfoerderung

Energy Technology Data Exchange (ETDEWEB)

Schmitt-Hannig, A.; Birschwilks, M.; Jung, T. [Bundesamt fuer Strahlenschutz (Germany)

2016-07-01

CONCERT is a joint project of the EU and its member states which assume joint financing: Over the next five years the largest European radiation protection programme so far will have available about 28 Million Euros for research and integrative measures, whereby the European Commission will bear 70 per cent of the costs. Integrative measures include, among others, targeted vocational education and training of junior researchers in radiation protection, better access to research and irradiation facilities for scientists, as well as a stronger connection of universities and research centres in radiation protection research.

Educational Research Centre of the Joint Institute for Nuclear Research and students training on the 'Medical Physics' speciality

International Nuclear Information System (INIS)

Ivanova, S.P.; )

2005-01-01

The Educational Research Centre (ERC) of the Joint Institute for Nuclear Research is the place of joint activity of the JINR, Moscow State University (MSU) and Moscow Engineering Physical Institute (MEFI) on students training by a broadened circle of specialities with introduction of new educational forms. Active application of medical accelerator beams of the JINR Laboratory of Nuclear Beams becomes a reason for implementation of a new training chair in the MEFI on the JINR base - the Physical methods in applied studies in the medicine chair. For the 'medical physics' trend development in 2003 the workshop on discussion both curricula and teaching methodic by the speciality was held. One the Educational Research Centre main activities is both organization and conducting an international scientific schools and training courses. The International student School 'Nuclear-Physical Methods and Accelerators is the most popular and traditional. The principal aim of these schools and courses is familiarization of students and postgraduates with last achievement and and contemporary problems of applied medical physics. The school audience is a students and postgraduates of ERC, MSU, MEFI, and an institutes of Poland, Hungary, Slovakia, France, Czech and Bulgaria

Ecotoxicology in Baden-Wuerttemberg. Research profile and possible joint research projects; Oekotoxikologie in Baden-Wuerttemberg. Forschungsprofil und moegliche Forschungsverbuende

Energy Technology Data Exchange (ETDEWEB)

Flaig, H.; Lohmann, U.; Ballschmiter, K.; Deissler, A.; Froescheis, O.; Kochte-Clemens, B.

2000-07-01

In 1996 the 'Landesforschungsbeirat Baden-Wuerttemberg' (Research Council of the Federal State) recommended a critical inventory of ecotoxicological research activities in Baden-Wuerttemberg in order to get a clearly defined orientation as well as a promotion of research. Assigned by the Ministry of Science, Research and Arts Baden-Wuerttemberg, the Center of Technology Assessment (Center of TA) designed and performed a project 'The Research Profile of Ecotoxicology in Baden-Wuerttemberg' with a focus on universities. Research activities in the federal state were registered, documented, and classified. In two round table discussions with experts from university and non-university research institutions, chemical industry, and ministries, the concept of the Center of TA for joint research projects in the field of ecotoxicology in Baden-Wuerttemberg was put in concrete terms. Joint research projects beyond university boundaries are presumably the most promising tool for ecotoxicology to grain profile as a discipline. Ideally, the strong points of several subjects should be combined; thus, creating synergy effects and enabling a comprehensive view of the research topic. We assume some organizational preconditions to be necessary for joint projects in order to be successful. Apart from a tight coordination, integrating measures are particularly important. Thus, a project should be obligatorily performed by at least one representative of environmental chemistry and one representative of research on biological effects. Financial means must be assigned, too, e.g. for the exchange of scientists and joint seminars, workshops or conferences. It should be checked thoroughly whether the 'Transregio'-program of the 'Deutsche Forschungsgemeinschaft' could serve as a model for implementing these integrating measures. Moreover, the results of the different working groups should be regularly combined and condensed to a comprehensive view of

Passion Research: A Joint Venture To Interest High School Students in Chemistry.

Science.gov (United States)

Carriere, Francois J.; Abouaf, Madeleine

1997-01-01

Describes a joint venture between the Centre National de la Recherche Scientifique (CNRS) and the Department of Education in France that was created to allow students to do practical scientific work with the help of a CNRS researcher. Presents two practical projects done by students on organic polymers and on color. Concludes that this increases…

Operation of the joint panel on occupational and environmental research for uranium production in Canada

International Nuclear Information System (INIS)

Stocker, H.; Duport, P.J.; Brown, L.D.

1993-07-01

The Joint Panel, formed in 1976, is a Canadian organization (composed of federal and provincial government departments and agencies, uranium mining companies, labour unions, and non-profit research institutions) whose members have voluntarily agreed to share information regarding planned, ongoing and completed research on the effects of uranium (and thorium) production on the radiological health and safety of workers and on the environment. The objectives of the Joint Panel are: the identification of areas (within its purview of interest) where research is required; the stimulation of research in areas where the needs have been identified; the dissemination of subsequent research results; and, the avoidance of unnecessary duplication in research activities. The operation of this unique organization permits a free and open discussion of a wide variety of research activities, draws upon its member institutions to form working groups for the preparation of technical documents, and complements its more formal business sessions with technical presentations on topics of current interest. Copies of reports of completed research are maintained by a secretariat, which also issues the minutes of all meetings as well as the annual reports

Harmonization in preclinical epilepsy research: A joint AES/ILAE translational initiative.

Science.gov (United States)

Galanopoulou, Aristea S; French, Jacqueline A; O'Brien, Terence; Simonato, Michele

2017-11-01

Among the priority next steps outlined during the first translational epilepsy research workshop in London, United Kingdom (2012), jointly organized by the American Epilepsy Society (AES) and the International League Against Epilepsy (ILAE), are the harmonization of research practices used in preclinical studies and the development of infrastructure that facilitates multicenter preclinical studies. The AES/ILAE Translational Task Force of the ILAE has been pursuing initiatives that advance these goals. In this supplement, we present the first reports of the working groups of the Task Force that aim to improve practices of performing rodent video-electroencephalography (vEEG) studies in experimental controls, generate systematic reviews of preclinical research data, and develop preclinical common data elements (CDEs) for epilepsy research in animals. Wiley Periodicals, Inc. © 2017 International League Against Epilepsy.

Joint nuclear safety research projects between the US and Russian Federation International Nuclear Safety Centers

International Nuclear Information System (INIS)

Bougaenko, S.E.; Kraev, A.E.; Hill, D.L.; Braun, J.C.; Klickman, A.E.

1998-01-01

The Russian Federation Ministry for Atomic Energy (MINATOM) and the US Department of Energy (USDOE) formed international Nuclear Safety Centers in October 1995 and July 1996, respectively, to collaborate on nuclear safety research. Since January 1997, the two centers have initiated the following nine joint research projects: (1) INSC web servers and databases; (2) Material properties measurement and assessment; (3) Coupled codes: Neutronic, thermal-hydraulic, mechanical and other; (4) Severe accident management for Soviet-designed reactors; (5) Transient management and advanced control; (6) Survey of relevant nuclear safety research facilities in the Russian Federation; (8) Advanced structural analysis; and (9) Development of a nuclear safety research and development plan for MINATOM. The joint projects were selected on the basis of recommendations from two groups of experts convened by NEA and from evaluations of safety impact, cost, and deployment potential. The paper summarizes the projects, including the long-term goals, the implementing strategy and some recent accomplishments for each project

Computer Assisted Surgery and Current Trends in Orthopaedics Research and Total Joint Replacements

Science.gov (United States)

Amirouche, Farid

2008-06-01

Musculoskeletal research has brought about revolutionary changes in our ability to perform high precision surgery in joint replacement procedures. Recent advances in computer assisted surgery as well better materials have lead to reduced wear and greatly enhanced the quality of life of patients. The new surgical techniques to reduce the size of the incision and damage to underlying structures have been the primary advance toward this goal. These new techniques are known as MIS or Minimally Invasive Surgery. Total hip and knee Arthoplasties are at all time high reaching 1.2 million surgeries per year in the USA. Primary joint failures are usually due to osteoarthristis, rheumatoid arthritis, osteocronis and other inflammatory arthritis conditions. The methods for THR and TKA are critical to initial stability and longevity of the prostheses. This research aims at understanding the fundamental mechanics of the joint Arthoplasty and providing an insight into current challenges in patient specific fitting, fixing, and stability. Both experimental and analytical work will be presented. We will examine Cementless total hip arthroplasty success in the last 10 years and how computer assisted navigation is playing in the follow up studies. Cementless total hip arthroplasty attains permanent fixation by the ingrowth of bone into a porous coated surface. Loosening of an ingrown total hip arthroplasty occurs as a result of osteolysis of the periprosthetic bone and degradation of the bone prosthetic interface. The osteolytic process occurs as a result of polyethylene wear particles produced by the metal polyethylene articulation of the prosthesis. The total hip arthroplasty is a congruent joint and the submicron wear particles produced are phagocytized by macrophages initiating an inflammatory cascade. This cascade produces cytokines ultimately implicated in osteolysis. Resulting bone loss both on the acetabular and femoral sides eventually leads to component instability. As

Elastic dynamic research of high speed multi-link precision press considering structural stiffness of rotation joints

Energy Technology Data Exchange (ETDEWEB)

Hu, Feng Feng; Sun, Yu; Peng, Bin Bin [School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing (China)

2016-10-15

An elastic dynamic model of high-speed multi-link precision press considering structural stiffness of rotation joints was established by the finite element method. In the finite element model, rotation joint was established by four bar elements with equivalent stiffness, and connected link was established by beam element. Then, the elastic dynamics equation of the system was established, and modal superposition method was used to solve the dynamic response. Compared with the traditional elastic dynamic model with perfect constraint of the rotation joints, the elastic dynamic response value of the improved model is larger. To validate the presented new method of elastic dynamics analysis with stiffness of rotation joints, a related test of slider Bottom dead center (BDC) position in different speed was designed. The test shows that the model with stiffness of rotation joints is more reasonable. So it provides a reasonable theory and method for dynamic characteristics research of such a multi-link machine.

Recent Corrosion Research Trends in Weld Joints

International Nuclear Information System (INIS)

Kim, Hwan Tae; Kil, Sang Cheol; Hwang, Woon Suk

2007-01-01

The increasing interest in the corrosion properties of weld joints in the corrosive environment is placing stringent demands on the manufacturing techniques and performance requirements, and the manufacture employs the high quality and efficiency welding process to produce welds. Welding plays an important role in the fabrication of chemical plants, nuclear power plant, ship construction, and this has led to an increasing attention to the corrosion resistant weld joints. This paper covers recent technical trends of welding technologies for corrosion resistance properties including the COMPENDEX DB analysis of welding materials, welding process, and welding fabrications

Proceedings of the seminar on the joint research project between JAERI and Universities. 'Actinide researches for 21st century - fusion between chemistry and engineering'. August 20-21, 1999, Japan Atomic Energy Research Inst., Tokai, Japan

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-06-01

The Seminar on the Joint Research Project between JAERI and Universities was held in Tokai, August 20-21, 1999, to discuss future perspectives of the actinide researches for the nuclear fuel cycle. The papers related to the Joint Research Project on the Backend Chemistry were presented and discussed. The present report complies the papers contributed to the Seminar. (author)

Breaking the Biological Barriers to Cellulosic Ethanol: A Joint Research Agenda

Energy Technology Data Exchange (ETDEWEB)

Houghton, John [Dept. of Energy (DOE), Washington DC (United States); Weatherwax, Sharlene [Dept. of Energy (DOE), Washington DC (United States); Ferrell, John [Dept. of Energy (DOE), Washington DC (United States)

2006-06-07

The Biomass to Biofuels Workshop, held December 7–9, 2005, was convened by the Department of Energy’s Office of Biological and Environmental Research in the Office of Science; and the Office of the Biomass Program in the Office of Energy Efficiency and Renewable Energy. The purpose was to define barriers and challenges to a rapid expansion of cellulosic-ethanol production and determine ways to speed solutions through concerted application of modern biology tools as part of a joint research agenda. Although the focus was ethanol, the science applies to additional fuels that include biodiesel and other bioproducts or coproducts having critical roles in any deployment scheme.

Evaluation of the fusion technology and safety programme of the Joint Research Centre (1980-85)

International Nuclear Information System (INIS)

Haines, M.; Cabibbo, N.; Crocker, J.G.; Lecomte, M.; Merz, E.

1986-01-01

The Joint Research Centre, Ispra, has been involved in fusion research since 1973. In July 1985 the Commission of European Communities - DG XII, following a policy of systematically evaluating its RandD activities, appointed a panel of external experts to evaluate the fusion technology and safety programme carried out at the Joint Research Centre. This report describes the work of the panel in evaluating the research performed by the JRC within the framework of its 1984-87 programme. The achievements of the previous programme, 1980-83, were also taken into consideration. The different research areas covered in the programme, i.e.: reactor studies, breeding blanket technology, structural materials studies, risk assessment and tritium laboratory studies, are described and a draft proposal for the period 1987-90 presented. The evaluation panel has been asked to assess the following aspects: the scientific and technical achievements of the programme, the contribution of the programme to the development of other Community policies, the role played by the JRC in the European fusion research (including NET) and in international collaborations such as INTOR. From its assessment the evaluation panel has made a series of recommendations for the current programme and for future work

25 years of the Joint Institute for Nuclear Research in Dubna and Czechoslovakia's part in its activities

International Nuclear Information System (INIS)

Simane, C.; Tucek, J.

1981-01-01

The main tasks and results attained by the individual units of the Joint Institute for Nuclear Research in Dubna are briefly described: by the high energy laboratory, the nuclear problems laboratory, the laboratory of theoretical physics, the laboratory of neutron physics, the laboratory of nuclear reactions, the laboratory of computer technology and automation, and by the unit responsible for the implementation of the project for accelerators of positively charged ions based on the principle of collective acceleration using electron rings. Czechoslovakia contributes approximately 6% to the financing of the Institute. Also briefly described are the main fields of cooperation between Czechoslovak research institutes and the laboratories of the Joint Institute for Nuclear Research. (Z.M.)

75 FR 25294 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Joint Venture To...

Science.gov (United States)

2010-05-07

... Production Act of 1993--Joint Venture To Perform Project Entitled Versatile Onboard Traffic Embedded Roaming... Cooperative Research and Production Act of 1993, 15 U.S.C. 4301 et seq. (``the Act''), Joint Venture to..., Trilion Quality Systems, Plymouth Meeting, PA, has been added as a party to this venture. Also, Witten...

The Joint Institute for Nuclear Research in Experimental Physics of Elementary Particles

Science.gov (United States)

Bednyakov, V. A.; Russakovich, N. A.

2018-05-01

The year 2016 marks the 60th anniversary of the Joint Institute for Nuclear Research (JINR) in Dubna, an international intergovernmental organization for basic research in the fields of elementary particles, atomic nuclei, and condensed matter. Highly productive advances over this long road clearly show that the international basis and diversity of research guarantees successful development (and maintenance) of fundamental science. This is especially important for experimental research. In this review, the most significant achievements are briefly described with an attempt to look into the future (seven to ten years ahead) and show the role of JINR in solution of highly important problems in elementary particle physics, which is a fundamental field of modern natural sciences. This glimpse of the future is full of justified optimism.

Jointly working on research for the energies of the future. Objectives of research; Gemeinsam forschen fuer die Energie der Zukunft. Forschungsziele

Energy Technology Data Exchange (ETDEWEB)

Stadermann, G.; Szczepanski, P. (comps.)

2006-07-01

The booklet consists of chapters and various articles: Doing research work with joint efforts; R and D - political objectives of FVS; fields of research and development; electrical system techniques; network management and separated power plants; heat and coolness from renewable energies; solar construction works: building covers and system techniques; generating and utilizing chemical energy sources from renewable energies; estimating consequences of techniques.

Research of alternative medicine formulary for joint pain treatment according to Food Act 1983

International Nuclear Information System (INIS)

Muhammad Ikmal Ahmad

2012-01-01

Joint is a type of tissue that connects two bones together. The main function of the joint tissues is to reduce the effect of friction that happens between bones resulting from the movement of the body. In a long term effect, the joint became dried and unable to absorb such vibration again. Thus, it will cause inflammation. A survey showed that patients with joints problems prefer the alternative prescription medicine rather than the modern medicines that are recommended by doctors. This is because it does not cost as much and it also can be easily obtained. However, the safety of consuming these products is doubtful and the side effect is unknown. This research is conducted by obtaining alternative prescription medicine for joint medication samples from Chow Kit, Kuala Lumpur area namely Jamu Jarum Emas, Maajun Kuat, Pil Tupai Jantan Asli, Kapsul Ajaib, Sendi Pil, Herba Ikan Haruan Asli, F.O.B., Tunglin Antirheumatic, and Sendi-Plus and the experiment is being tested using X-ray Fluorescence technique and referred to Akta Makanan 1983 to see whether the the medicines is safe to be consumed or not. Six heavy metal elements is stated in the act which are toxic to humans like arsenic, lead, tin, mercury, cadmium, and antimony. The amounts permitted by the act are 1, 2, 40, 0.05, 1 and 1 mg/ kg respectively. From the research, only three heavy metals have the amounts below the maximum amounts permitted by the law that is lead, cadmium, and antimony with the amount of 0.23, 0.23, and 0.04 mg/ kg while the amount of arsenic, lead, and mercury are way exceeds the law with the concentrations of 4.33 ± 0.460, 18.0 ± 1.11, and 0.120 ± 0.007 mg/ kg respectively. All samples manufacturer do not obey the law completely, thus the safety for consuming this products can cause severe effect on human health. (author)

First Joint Workshop on Energy Management for Large-Scale Research Infrastructures

CERN Document Server

2011-01-01

  CERN, ERF (European Association of National Research Facilities) and ESS (European Spallation Source) announce the first Joint Workshop on Energy Management for Large-Scale Research Infrastructures. The event will take place on 13-14 October 2011 at the ESS office in Sparta - Lund, Sweden.   The workshop will bring together international experts on energy and representatives from laboratories and future projects all over the world in order to identify the challenges and best practice in respect of energy efficiency and optimization, solutions and implementation as well as to review the challenges represented by potential future technical solutions and the tools for effective collaboration. Further information at: http://ess-scandinavia.eu/general-information

23 science societies issue joint call for more federal research dollars

Science.gov (United States)

Carlowicz, Michael

In an unprecedented demonstration of unity, the leaders of 23 American scientific societies and umbrella organizations gathered on March 4 in Washington, D.C., to press the U.S. federal government for increased funding for scientific research and to make an investment in the nation's future. In a “Joint Statement on Scientific Research” addressed to President Bill Clinton and the Congress, the presidents of learned societies representing more than one million scientists, mathematicians, and engineers asked the government “to renew the nation's historical commitment to scientific research and education,” and to reverse the decline of federal investment in science and engineering. The American Geophysical Union was one of the signatories of the statement.

WHO/IAEA joint research programme on trace elements in cardiovascular diseases

International Nuclear Information System (INIS)

1980-03-01

After several years of support by WHO and IAEA for the joint research programme on trace elements in cardiovascular diseases, a consultants' meeting was held (1) to examine the present status of the programme with a view to advising on actions necessary for its completion, and (2) to advise on the form, content and timing of a final report. The meeting was attended by the invited experts and other persons. The main work of this research programme is divided, as before, between two projects, (1) on Cd, Cr, Cu, Se, Zn and other elements in relation to ischaemic heart disease, and (2) on Cd, Se and Zn in relation to arterial hypertension

Commission of the european communities. Joint research centre. Petten Establishment. Annual Report 1977

International Nuclear Information System (INIS)

1977 marked the beginning of a new multiannual research programme for the European Commission's Joint research Centre. Regarding the exploitation of HFR (High Flux Reactor), the year was one of steady, on-schedule operation with high utilization, although this fell off slightly in the autumn due to overloading of our capsule project engineering team and manufacturing services. We are pleased to note that the HFR Users' Meeting, held in October, drew about 100 participants from Europe and America and demonstrated a lively interest in the Commission's materials testing reactor. Technical improvements to the plant are being examined as one means of maintaining or even increasing this interest in the 1980's. Following the wishes of the Council of Ministers, new Advisory Committees for Programme Management have been set up for all the Joint Research Centre's activities and those for HFR and High Temperature Materials Programmes have met at Petten. This latter Committee is entirely new to its task, the programme having been served until 1977 by a number of ad hoc meetings of national experts. The work of the Organic Chemistry Laboratory falls under the wings of the Community Reference Bureau Advisory Committee, who have met in Brussels and strongly encouraged the development of the activity

The joint cardiovascular research profile of the university medical centres in the Netherlands.

Science.gov (United States)

van Welie, S D; van Leeuwen, T N; Bouma, C J; Klaassen, A B M

2016-05-01

Biomedical scientific research in the Netherlands has a good reputation worldwide. Quantitatively, the university medical centres (UMCs) deliver about 40 % of the total number of scientific publications of this research. Analysis of the bibliometric output data of the UMCs shows that their research is highly cited. These output-based analyses also indicate the high impact of cardiovascular scientific research in these centres, illustrating the strength of this research in the Netherlands. A set of six joint national cardiovascular research topics selected by the UMCs can be recognised. At the top are heart failure, rhythm disorder research and atherosclerosis. National collaboration of top scientists in consortia in these three areas is successful in acquiring funding of large-scale programs. Our observations suggest that funding national consortia of experts focused on a few selected research topics may increase the international competitiveness of cardiovascular research in the Netherlands.

Report on the project on the researcher dispatch type international joint research survey. International joint research for creation of new industries; Kenkyusha hakengata kokusai kyodo kenkyu chosa jigyo. Shinki sangyo soshutsu kokusai kyodo kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of digging up themes of the joint research which develop the R and D in the industrial field in Japan to a new stage, researchers were dispatched to the world representing research institutes to make the research study. As to the survey of the trend of bio-informatics research, visits for survey were paid by 8 researchers to 19 research institutes in the U.S., Australia, France and Germany, and survey was made of the state of new researches such as the genetic network analysis by DNA chip data. Relating to the survey of the trend of the plan for ape genomic DNA sequence, visits for survey were paid by 6 researchers to 12 research institutes in Japan, Germany, France and the U.K. Concerning the research survey with aim of developing the selective reversible expression technology of target genes, researchers were dispatched to St. Jude Children's Research Hospital in the U.S. to conduct the following: construction of basic expression vectors, functional evaluation using cultured cells, making of the transgenic mice to which medicine dependent and cell peculiar expression control genes were introduced, analytical study of the situation of expression control, etc. (NEDO)

Brief review of topmost scientific results obtained in 2016 at the Joint Institute for Nuclear Research

International Nuclear Information System (INIS)

Kravchenko, E.I.; Sabaeva, E.V.

2017-01-01

This brief review presents the topmost scientific results obtained in 2016 at the Joint Institute for Nuclear Research in such fields as theoretical and experimental physics, radiation and radiobiological research, accelerators, information technology and computer physics. It also provides information about the publications by JINR staff members and activities carried out at the JINR University Centre in 2016. [ru

Annual report of the research results with Rikkyo University's joint-use reactor etc. for fiscal 1974

International Nuclear Information System (INIS)

1975-01-01

The results of research works by universities with Rikkyo University's joint-use reactor and RCNST's (Research Center for Nuclear Science and Technology) instruments for fiscal 1974 are described. Comprising the areas of activation analysis (in such as earth science, biology and environmental science), hot atom chemistry, etc., the results are presented in individual summaries. (Mori, K.)

Research review: Social motivation and oxytocin in autism--implications for joint attention development and intervention.

Science.gov (United States)

Stavropoulos, Katherine K M; Carver, Leslie J

2013-06-01

The social motivation hypothesis (SMH) suggests that individuals with autism spectrum disorders (ASD) are less intrinsically rewarded by social stimuli than their neurotypical peers. This difference in social motivation has been posited as a factor contributing to social deficits in ASD. Social motivation is thought to involve the neuropeptide oxytocin. Here, we review the evidence for oxytocin effects in ASD, and discuss its potential role in one important social cognitive behavior. Systematic searches were conducted using the PsychINFO and MEDLINE databases and the search terms 'oxytocin' and 'autism'; the same databases were used for separate searches for 'joint attention', 'intervention', and 'autism', using the same inclusion criteria as an earlier 2011 review but updating it for the period 2010 to October 2012. Several studies suggest that giving oxytocin to both individuals with ASD and neurotypical individuals can enhance performance on social cognitive tasks. Studies that have attempted to intervene in joint attention in ASD suggest that social motivation may be a particular obstacle to lasting effects. The review of the evidence for the SMH suggests a potential role for oxytocin in social motivation deficits in ASD. Because of its importance for later communicative and social development, the focus here is on implications of oxytocin and social motivation in the development of and interventions in joint attention. Joint attention is a central impairment in ASD, and as a result is the focus of several behavioral interventions. In describing this previous research on joint attention interventions in ASD, we pay particular attention to problems encountered in such studies, and propose ways that oxytocin may facilitate behavioral intervention in this area. For future research, integrating behavioral and pharmacological interventions (oxytocin administration) would be a worthwhile experimental direction to improve understanding of the role of oxytocin in ASD

Joint KAERI/VAEC pre-possibility study on a new research reactor for Vietnam

Energy Technology Data Exchange (ETDEWEB)

Park, Cheol; Lee, B. C.; Chae, H. T.; Kim, H.; Lee, C. S.; Choi, C. O.; Jun, B. J. [KAERI, Taejon (Korea, Republic of); Vien, Luong Ba; Dien, Nguyen Nhi [Vietnam Atomic Energy Commission, Hanoi (Viet Nam)

2004-05-01

Based on the agreement on the technical cooperation for nuclear technology between Korea and Vietnam, a KAERI/VAEC joint study on the pre-possibility of a new research reactor for Vietnam has been carried out in the research reactor area from Nov. 2003 to May 2004. In this report, the results of the pre-possibility study on a new research reactor are described. The report presents the necessity of a new research reactor in Vietnam, and the desired performance requirements of the new research reactor if necessary. The major design characteristics of some existing research reactors and those under planning were also reviewed and the main characteristics which should be considered in selecting a new multipurpose research reactor for Vietnam were drawn. Some recommendations on the considerations for the next step of the feasibility study such as the project formulation, manpower requirements and international co-operation were also briefly touched upon.

Joint KAERI/VAEC pre-possibility study on a new research reactor for Vietnam

International Nuclear Information System (INIS)

Park, Cheol; Lee, B. C.; Chae, H. T.; Kim, H.; Lee, C. S.; Choi, C. O.; Jun, B. J.; Vien, Luong Ba; Dien, Nguyen Nhi

2004-05-01

Based on the agreement on the technical cooperation for nuclear technology between Korea and Vietnam, a KAERI/VAEC joint study on the pre-possibility of a new research reactor for Vietnam has been carried out in the research reactor area from Nov. 2003 to May 2004. In this report, the results of the pre-possibility study on a new research reactor are described. The report presents the necessity of a new research reactor in Vietnam, and the desired performance requirements of the new research reactor if necessary. The major design characteristics of some existing research reactors and those under planning were also reviewed and the main characteristics which should be considered in selecting a new multipurpose research reactor for Vietnam were drawn. Some recommendations on the considerations for the next step of the feasibility study such as the project formulation, manpower requirements and international co-operation were also briefly touched upon

Establishing a Research and Evaluation Capability for the Joint Medical Education and Training Campus.

Science.gov (United States)

Kirby, Sheila Nataraj; Marsh, Julie A; Thie, Harry J

2011-01-01

In calling for the transformation of military medical education and training, the 2005 Base Realignment and Closure Commission recommended relocating basic and specialty enlisted medical training to a single site to take advantage of economies of scale and the opportunity for joint training. As a result, a joint medical education and training campus (METC) has been established at Fort Sam Houston, Texas. Two of METC's primary long-term goals are to become a high-performing learning organization and to seek accreditation as a community college. Such goals require a clear model of organizational improvement with well-defined metrics for measuring its performance and using research and evaluation to assess and improve that performance. Lessons learned from a review of practices at institutions with similar missions-such as community colleges, corporate universities, the UK's Defence Medical Education and Training Agency, and other federal agencies, such as the Veterans Health Administration-establish a clear need for an office of institutional research to help METC attain its organizational goals. They also provide useful recommendations regarding the METC office's structure, scope, and governance.

Medical Surveillance Monthly Report (MSMR). Volume 22, Number 5, May 2015

Science.gov (United States)

2015-05-01

Percentages of joint replace- ment cases who remained in service or had left service, 2 years post-joint replacement, by gender , active component...Musculoskeletal-related disability in US Army personnel: prevalence, gender and military occupational specialties. J Occup Environ Med. 1997;39(1):68–78...military rank, and parity (all defi ned at the date of delivery). Service women who had been vaccinated during their pregnancies were additionally

Joint US/German Conference

CERN Document Server

Gulledge, Thomas; Jones, Albert

1993-01-01

This proceedings volume contains selected and refereed contributions that were presented at the conference on "Recent Developments and New Perspectives of Operations Research in the Area of Production Planning and Control" in Hagen/Germany, 25. - 26. June 1992. This conference was organized with the cooperation of the FernuniversiHit Hagen and was jointly hosted by the "Deutsche Gesellschaft fur Operations Research (DGOR)" and the "Manufacturing Special Interest Group of the Operations Research Society of America (ORSA-SIGMA)". For the organization of the conference we received generous financial support from the sponsors listed at the end of this volume. We wish to express our appreciation to all supporters for their contributions. This conference was the successor of the JOInt ORSA/DGOR-conference in Gaithersburg/Maryland, USA, on the 30. and 31. July 1991. Both OR-societies committed themselves in 1989 to host joint conferences on special topics of interest from the field of operations research. This goal ...

76 FR 8788 - National Nanotechnology Coordination Office; Bridging NanoEHS Research Efforts: A Joint US-EU...

Science.gov (United States)

2011-02-15

... OFFICE OF SCIENCE AND TECHNOLOGY POLICY National Nanotechnology Coordination Office; Bridging NanoEHS Research Efforts: A Joint US-EU Workshop: Public Meeting AGENCY: National Nanotechnology Coordination Office, STPO. ACTION: Notice of public meeting. SUMMARY: The National Nanotechnology Coordination...

Joint Panel on Occupational and Environmental Research for Uranium Production 1981 annual report

International Nuclear Information System (INIS)

1982-09-01

Occupational health and environmental effects associated with the production of uranium are of concern to labour, industry, government and the public. To alleviate this concern the knowledge base for the industry must be expanded. At present there is no single Canadian organization with the authority, expertise or research resources to perform this task independently. The Joint Panel on Occupational and Environmental Research for Uranium Production is a voluntary association of organizations with an active and continuing involvement in this research. Members accept the obligation to inform each other of progress in their on-going work, to contribute to the development of a comprehensive program of research and to make final research results available to the public. This report delineates guiding principles and procedures, lists member organizations, gives highlights of activities during 1981, and provides an update on the status of research projects and publications

The Universities and JAERI joint research project. The achievements and prospects

International Nuclear Information System (INIS)

Ohashi, Hiroshi; Nakamura, Takashi; Yamaguchi, Sadaei

1999-01-01

The universities and JAERI joint research project has been carried out since 13 years ago on an equivalent basis with the universities and JAERI and co-ownership of the results. This paper consists of the history and results of research project and evaluation. The significance, characteristics, themes and problems of the project are arranged. The main results and the future of the project are explained. Two large projects such as the backend chemical project and the high-degree application of radiation project have been studied. The backend chemical project consisted of four themes; the nuclear chemical researches for TRU recycle, the solid chemical research of nuclear fuel and waste, new separation method for reprocessing and waste disposal and the fundamental chemical researches for disposal waste. The high-degree application of radiation project have eight themes; effects of ion beam on organism, slow positron generation and its application to materials, ion irradiation effects on polymer materials, nuclear spectroscopy and nuclear physics of isotope using online isotope separator, shield and behavior of accelerator radiation, materials analysis by ion beam, effects of nuclear transformation product by nuclear fusion reactor radiation damage and biofunction analysis of plant using positron release nuclide. (S.Y.)

Scheduling under uncertainty : Attaining flexibility, robustness and stability

NARCIS (Netherlands)

Mountakis, Kiriakos Simon

2018-01-01

The research presented in this thesis is part of the Rolling Stock Life Cycle Logistics applied research and development program, conducted by NedTrain. As a company, NedTrain belongs to Nederlandse Spoorwegen (NS; the principal railway company in the Netherlands) and provides maintenance services

Experimental research of joint influence of salinization and petroleum pollution on thermal capacity of frozen ground

International Nuclear Information System (INIS)

Motenko, R.G.

2010-01-01

Most gas and petroleum fields are located in permafrost zones, with some being on saline territories. Oil pollution of soils can occur in different ways and at different points such as during the extraction, processing and storage, and during transportation of oil and petroleum products. Oil producing pollution and salinization of soil often happen together. In this case, the sources of salts are the formation fluid, commercial waste water, the contents of the granaries and other geochemically active substances used for the extraction and desalting of crude oil. Joint salinization and contamination can also happen during the rupture of oil pipelines in saline areas. Although there is research available on the properties of saline soils and on properties of soils polluted with petroleum, there are no studies that describe changes of ground properties with joint pollution of salt and petroleum. This paper presented a study that examined the joint influence of salinization and petroleum pollution on the thermal characteristics of thawed and frozen grounds, particularly on thermal capacity. The paper outlined the purpose of the research and described the experimental methods. It was concluded that an increase of salinization increases the heat capacity of frozen soil because the amount of unfrozen water increases with increasing salinization. 10 refs., 5 figs.

Experimental research of joint influence of salinization and petroleum pollution on thermal capacity of frozen ground

Energy Technology Data Exchange (ETDEWEB)

Motenko, R.G. [Moscow State Univ., Moscow (Russian Federation). Dept. of Geocryology; Grechishcheva, E.S. [Fundamentproek, Moscow (Russian Federation)

2010-07-01

Most gas and petroleum fields are located in permafrost zones, with some being on saline territories. Oil pollution of soils can occur in different ways and at different points such as during the extraction, processing and storage, and during transportation of oil and petroleum products. Oil producing pollution and salinization of soil often happen together. In this case, the sources of salts are the formation fluid, commercial waste water, the contents of the granaries and other geochemically active substances used for the extraction and desalting of crude oil. Joint salinization and contamination can also happen during the rupture of oil pipelines in saline areas. Although there is research available on the properties of saline soils and on properties of soils polluted with petroleum, there are no studies that describe changes of ground properties with joint pollution of salt and petroleum. This paper presented a study that examined the joint influence of salinization and petroleum pollution on the thermal characteristics of thawed and frozen grounds, particularly on thermal capacity. The paper outlined the purpose of the research and described the experimental methods. It was concluded that an increase of salinization increases the heat capacity of frozen soil because the amount of unfrozen water increases with increasing salinization. 10 refs., 5 figs.

Summary of a joint US-Japan study of potential approaches to reduce the attractiveness of various nuclear materials for use in a nuclear explosive device by a terrorist group

Energy Technology Data Exchange (ETDEWEB)

Bathke, C.G. [Los Alamos National Laboratory, P.O. Box 1663, Los Alamos, NM (United States); Inoue, N.; Kuno, Y.; Mihara, T.; Sagara, H. [Japan Atomic Energy Agency, 4-49 Muramatsu, Tokai-mura, Naka-gun, Ibaraki 319-1184 (Japan); Ebbinghaus, B.B. [Lawrence Livermore National Laboratory, P.O. Box L-168, Livermore, CA 94551 (United States); Murphy, J.; Dalton, D. [National Nuclear Security Administration, Department of Energy, 1000 Independence Ave, SW, Washington, DC 20585 (United States); Nagayama, Y. [Ministry of Education, Culture, Sports, Science and Technology, 3-2-2 Kasumigaseki, Chiyoda-ku, Tokyo 100-8959 (Japan)

2013-07-01

This paper summarizes the results of a joint US-Japan study to establish a mutual understanding, through scientific-based study, of potential approaches to reduce the attractiveness of various nuclear materials for use in a terrorist nuclear explosive device (NED). 4 approaches that can reduce materials attractiveness with a very high degree of effectiveness are: -) diluting HEU with natural or depleted U to an enrichment of less than 10% U-235; -) storing Pu in nuclear fuel that is not man portable and with a dose rate greater or equal to 10 Gy/h at 1 m; -) storing Pu or HEU in heavy items, i.e. not transportable, provided the removal of the Pu or HEU from the item requires a purification/processing capability; and -) converting Pu and HEU to very dilute forms (such as wastes) that, without any security barriers, would require very long acquisition times to acquire a Category I quantity of Pu or of HEU. 2 approaches that can reduce materials attractiveness with a high degree of effectiveness are: -) converting HEU-fueled research reactors into LEU-fueled research reactors or dilute HEU with natural or depleted U to an enrichment of less than 20% U-235; -) converting U/Al reactor fuel into U/Si reactor fuel. Other approaches have been assessed as moderately or totally inefficient to reduce the attractiveness of nuclear materials.

Brief review of topmost scientific results obtained in 2015 at the Joint Institute for Nuclear Research

International Nuclear Information System (INIS)

Sabaeva, E.V.; Krupko, E.I.

2016-01-01

This brief review presents the topmost scientific results obtained in 2015 at the Joint Institute for Nuclear Research in such fields as theoretical and experimental physics, radiation and radiobiological research, accelerators, information technology and computer physics. It also provides information about the publications by JINR staff members, awards given to JINR scientists, and activities carried out at the JINR University Centre in 2015. [ru

Brief review of topmost scientific results obtained in 2013 at the Joint Institute for Nuclear Research

International Nuclear Information System (INIS)

Sabaeva, E.V.; Kravchenko, E.I.

2014-01-01

This brief review presents the topmost scientific results obtained in 2013 at the Joint Institute for Nuclear Research in such areas as theoretical physics, experimental physics, radiation and radiobiological research, accelerators, information technology and computer physics. It also provides information on the number of publications by JINR staff members, awards given to JINR scientists, and activities carried out at the JINR University Centre in 2013.

Brief review of topmost scientific results obtained in 2014 at the Joint Institute for Nuclear Research

International Nuclear Information System (INIS)

Bulatova, V.V.; Sabaeva, E.V.

2015-01-01

This brief review presents the topmost scientific results obtained in 2014 at the Joint Institute for Nuclear Research in such fields as theoretical and experimental physics, radiation and radiobiological research, accelerators, information technology and computer physics. It also provides information about the publications by JINR staff members, patents for inventions, awards given to JINR scientists, and activities carried out at the JINR University Centre in 2014. [ru

Proceedings of the symposium on the joint research program between JAERI and Universities. Current status and future perspectives of the chemistry research in the nuclear fuel cycle back end field

International Nuclear Information System (INIS)

1999-10-01

The first Symposium on the Joint Research Project between JAERI and Universities was held in Tokyo, January 27, 1999, to present the main achievements of the project in these 5 years and to discuss future perspectives of the chemistry research relating to the nuclear fuel cycle. The areas covered by the Joint Research Project are (1) Nuclear Chemistry for TRU Recycling, (2) Solid State Chemistry on Nuclear Fuels and Wastes, (3) Solution Chemistry on Fuel Reprocessing and Waste Management, and (4) Fundamental Chemistry on Radioactive Waste Disposal. The 8 papers are indexed individually. (J.P.N.)

What Determines Joint Venture Termination?

DEFF Research Database (Denmark)

Nielsen, Bo Bernhard

2012-01-01

Joint venture (JV) research continues to flourish as researchers seek to advance our understanding of why so many JVs fail. Cui and Kumar (this issue) take a contingency approach to explain how and why business relatedness may provide new insights as to what determines JV termination. This commen......Joint venture (JV) research continues to flourish as researchers seek to advance our understanding of why so many JVs fail. Cui and Kumar (this issue) take a contingency approach to explain how and why business relatedness may provide new insights as to what determines JV termination...

NIFS joint research meeting on plasma facing components, PSI, and heat/particle control

International Nuclear Information System (INIS)

Yamashina, T.

1997-10-01

The LHD collaboration has been started in 1996. Particle and heat control is one of the categories for the collaboration, and a few programs have been nominated in these two years. A joint research meeting on PFC, PSI, heat and particle meeting was held at NIFS on June 27, 1997, in which present status of these programs were reported. This is a collection of the notes and view graphs presented in this meeting. Brief reviews and research plan of each program are included in relation to divertor erosion and sputtering, impurity generation, hydrogen recycling, edge plasma structure, edge transport and its control, heat removal, particle exhaust, wall conditioning etc. (author)

Research Review: Social motivation and oxytocin in autism – implications for joint attention development and intervention

Science.gov (United States)

Stavropoulos, Katherine K. M.; Carver, Leslie J.

2013-01-01

Background and Scope The social motivation hypothesis (SMH) suggests that individuals with autism spectrum disorders (ASD) are less intrinsically rewarded by social stimuli than their neurotypical peers. This difference in social motivation has been posited as a factor contributing to social deficits in ASD. Social motivation is thought to involve the neuropeptide oxytocin. Here, we review the evidence for oxytocin effects in ASD, and discuss its potential role in one important social cognitive behavior. Methods Systematic searches were conducted using the PsychINFO and MEDLINE databases and the search terms “oxytocin”, and “autism”; the same databases were used for separate searches for “joint attention”, “intervention”, and “autism”, using the same inclusion criteria as an earlier 2011 review but updating it for the period 2010 to October 2012. Findings Several studies suggest that giving oxytocin to both individuals with ASD and typically developing individuals can enhance performance on social cognitive tasks. Studies that have attempted to intervene in joint attention in ASD suggest that social motivation may be a particular obstacle to lasting effects. Conclusions The review of the evidence for the SMH suggests a potential role for oxytocin in social motivation deficits in ASD. Because of its importance for later communicative and social development, the focus here is on implications of oxytocin and social motivation in the development of and interventions in joint attention. Joint attention is a central impairment in ASD, and as a result is the focus of several behavioral interventions. In describing this previous research on joint attention interventions in ASD, we pay particular attention to problems encountered in such studies, and propose ways that oxytocin may facilitate behavioral intervention in this area. For future research, integrating behavioral and pharmacological interventions (oxytocin administration) would be a worthwhile

FY-2013 FES (Fusion Energy Sciences) Joint Research Target Report

Energy Technology Data Exchange (ETDEWEB)

Fenstermacher, M. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Garofalo, A. M. [General Atomics, San Diego, CA (United States); Gerhardt, S. P. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Hubbard, A. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Maingi, R. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Whyte, D. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

2013-09-30

The H-mode confinement regime is characterized by a region of good thermal and particle confinement at the edge of the confined plasma, and has generally been envisioned as the operating regime for ITER and other next step devices. This good confinement is often interrupted, however, by edge-localized instabilities, known as ELMs. On the one hand, these ELMs provide particle and impurity flushing from the plasma core, a beneficial effect facilitating density control and stationary operation. On the other hand, the ELMs result in a substantial fraction of the edge stored energy flowing in bursts to the divertor and first wall; this impulsive thermal loading would result in unacceptable erosion of these material surfaces if it is not arrested. Hence, developing and understanding operating regimes that have the energy confinement of standard H-mode and the stationarity that is provided by ELMs, while at the same time eliminating the impulsive thermal loading of large ELMs, is the focus of the 2013 FES Joint Research Target (JRT): Annual Target: Conduct experiments and analysis on major fusion facilities, to evaluate stationary enhanced confinement regimes without large Edge Localized Modes (ELMs), and to improve understanding of the underlying physical mechanisms that allow acceptable edge particle transport while maintaining a strong thermal transport barrier. Mechanisms to be investigated can include intrinsic continuous edge plasma modes and externally applied 3D fields. Candidate regimes and techniques have been pioneered by each of the three major US facilities (C-Mod, D3D and NSTX). Coordinated experiments, measurements, and analysis will be carried out to assess and understand the operational space for the regimes. Exploiting the complementary parameters and tools of the devices, joint teams will aim to more closely approach key dimensionless parameters of ITER, and to identify correlations between edge fluctuations and transport. The role of rotation will be

Research on Microstructure and Properties of Welded Joint of High Strength Steel

Science.gov (United States)

Zhu, Pengxiao; Li, Yi; Chen, Bo; Ma, Xuejiao; Zhang, Dongya; Tang, Cai

2018-01-01

BS960 steel plates were welded by Laser-MAG and MAG. The microstructure and properties of the welded joints were investigated by optical microscope, micro-hardness tester, universal tensile testing machine, impact tester, scanning electron microscope (SEM) and fatigue tester. By a series of experiments, the following results were obtained: The grain size of the coarse grain zone with Laser-MAG welded joint is 20μm, and that with MAG welded joint is about 32μm, both of the fine grain region are composed of fine lath martensite and granular bainite; the width of the heat affected region with Laser-MAG is lower than that with MAG. The strength and impact energy of welded joints with Laser-MAG is higher than that with MAG. The conditioned fatigue limit of welded joint with Laser-MAG is 280MPa; however, the conditioned fatigue limit of welded joint with MAG is 250MPa.

Report of researches by joint use of Kyoto University Research Reactor Institute in the second half of the fiscal year 1978

International Nuclear Information System (INIS)

1981-03-01

This is the biannual report of 69 research items by the joint use of the reactor, each item being written in a page. The research items are roughly classified into 25 items related to chemistry, 18 items to physics, 6 items to metallurgy, 4 items to geology, 14 items to biology and medicine, and 2 items to agriculture. Presence of many items related to physics and chemistry is a matter of course, but the increase of the items related to biology and medicine is noticeable. (Wakatsuki, Y.)

The joint flanker effect and the joint Simon effect: On the comparability of processes underlying joint compatibility effects.

Science.gov (United States)

Dittrich, Kerstin; Bossert, Marie-Luise; Rothe-Wulf, Annelie; Klauer, Karl Christoph

2017-09-01

Previous studies observed compatibility effects in different interference paradigms such as the Simon and flanker task even when the task was distributed across two co-actors. In both Simon and flanker tasks, performance is improved in compatible trials relative to incompatible trials if one actor works on the task alone as well as if two co-actors share the task. These findings have been taken to indicate that actors automatically co-represent their co-actor's task. However, recent research on the joint Simon and joint flanker effect suggests alternative non-social interpretations. To which degree both joint effects are driven by the same underlying processes is the question of the present study, and it was scrutinized by manipulating the visibility of the co-actor. While the joint Simon effect was not affected by the visibility of the co-actor, the joint flanker effect was reduced when participants did not see their co-actors but knew where the co-actors were seated. These findings provide further evidence for a spatial interpretation of the joint Simon effect. In contrast to recent claims, however, we propose a new explanation of the joint flanker effect that attributes the effect to an impairment in the focusing of spatial attention contingent on the visibility of the co-actor.

Proceedings of the Third International Workshop on Jointed Structures.

Energy Technology Data Exchange (ETDEWEB)

Starr, Michael James; Brake, Matthew Robert; Segalman, Daniel Joseph; Bergman, Lawrence A.; Ewins, David J.

2013-08-01

The Third International Workshop on Jointed Structures was held from August 16th to 17th, 2012, in Chicago Illinois, following the ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Thirty two researchers from both the United States and international locations convened to discuss the recent progress of mechanical joints related research and associated efforts in addition to developing a roadmap for the challenges to be addressed over the next five to ten years. These proceedings from the workshop include the minutes of the discussions and follow up from the 2009 workshop [1], presentations, and outcomes of the workshop. Specifically, twelve challenges were formulated from the discussions at the workshop, which focus on developing a better understanding of uncertainty and variability in jointed structures, incorporating high fidelity models of joints in simulations that are tractable/efficient, motivating a new generation of researchers and funding agents as to the importance of joint mechanics research, and developing new insights into the physical phenomena that give rise to energy dissipation in jointed structures. The ultimate goal of these research efforts is to develop a predictive model of joint mechanics.

Record of the first meeting of the Joint Coordinating Committee for Radiation Effects Research

International Nuclear Information System (INIS)

1994-01-01

This conference was held July 27--28, 1994 in Moscow. The main purpose of the meeting was to implement an agreement between the Russian Federation and the US to facilitate cooperative research on health and environmental effects of radiation. It was hoped that the exchange of information would provide a good basis for employing new scientific knowledge to implement practical measures to facilitate the rehabilitation of radioactively contaminated areas and to treat radiation illnesses. The Russian Federation suggested five main scientific areas for cooperative research. They will prepare proposals on 4--5 projects within the scope of the scientific areas discussed and forward them to the US delegation for consideration of the possibility to facilitate joint research

Report from the Third Annual Symposium of the RIKEN-Max Planck Joint Research Center for Systems Chemical Biology.

Science.gov (United States)

Brunschweiger, Andreas

2014-08-15

The third Annual Symposium of the RIKEN-Max Planck Joint Research Center for Systems Chemical Biology was held at Ringberg castle, May 21-24, 2014. At this meeting 45 scientists from Japan and Germany presented the latest results from their research spanning a broad range of topics in chemical biology and glycobiology.

RESEARCH ON THE HOMOGENEITY OF TEMPERATURES IN JOINT'S AREA BY VULCANIZING THE CONVEYOR BELTS

Directory of Open Access Journals (Sweden)

Dan DOBROTA

2016-05-01

Full Text Available The researches presented in this paper have followed the analysis of the heat transfer mode during joining through vulcanization of the conveyor belts and also the homogeneity of the temperatures in the joint area. The researches were made under laboratory conditions taking into account the process of joining of two conveyor belts of the type ST 2000 with an installation of the type DSLQ. Temperature measurement was conducted using an EX42570 pyrometer in four distinct points corresponding to each end of the two conveyor belts on the both sides of the band, namely the active and inactive side.

Seismic response of rock joints and jointed rock mass

International Nuclear Information System (INIS)

Ghosh, A.; Hsiung, S.M.; Chowdhury, A.H.

1996-06-01

Long-term stability of emplacement drifts and potential near-field fluid flow resulting from coupled effects are among the concerns for safe disposal of high-level nuclear waste (HLW). A number of factors can induce drift instability or change the near-field flow patterns. Repetitive seismic loads from earthquakes and thermal loads generated by the decay of emplaced waste are two significant factors. One of two key technical uncertainties (KTU) that can potentially pose a high risk of noncompliance with the performance objectives of 10 CFR Part 60 is the prediction of thermal-mechanical (including repetitive seismic load) effects on stability of emplacement drifts and the engineered barrier system. The second KTU of concern is the prediction of thermal-mechanical-hydrological (including repetitive seismic load) effects on the host rock surrounding the engineered barrier system. The Rock Mechanics research project being conducted at the Center for Nuclear Waste Regulatory Analyses (CNWRA) is intended to address certain specific technical issues associated with these two KTUs. This research project has two major components: (i) seismic response of rock joints and a jointed rock mass and (ii) coupled thermal-mechanical-hydrological (TMH) response of a jointed rock mass surrounding the engineered barrier system (EBS). This final report summarizes the research activities concerned with the repetitive seismic load aspect of both these KTUs

Single-photon sources for quantum technologies - Results of the joint research project SIQUTE

DEFF Research Database (Denmark)

Kück, S.; López, M.; Rodiek, B.

2017-01-01

In this presentation, the results of the joint research project “Single-Photon Sources for Quantum Technologies” (SIQUTE) [1] will be presented. The focus will be on the development of absolutely characterized single-photon sources, on the realization of an efficient waveguide-based single-photon......-photon source at the telecom wavelengths of 1.3 µm and 1.55 µm, on the implementation of the quantum-enhanced resolution in confocal fluorescence microscopy and on the development of a detector for very low photon fluxes...

Leaving a joint audit system

DEFF Research Database (Denmark)

Holm, Claus; Thinggaard, Frank

2014-01-01

determinants model and an audit fee change model and include interaction terms. Findings: The authors find short-term fee reductions in companies switching to single audits, but only where the former joint audit contained a dominant auditor. The authors argue that in this situation bargaining power is more...... with the auditors than in a equally shared joint audit, and that the auditors' incentives to offer an initial fee discount are bigger. Research limitations/implications: The number of observations is constrained by the small Danish capital market. Future research could take a more qualitative research approach......, to examine whether the use of a single audit firm rather than two has an effect on audit quality. The area calls for further theory development covering audit fee and audit quality in joint audit settings. Practical implications: Comapnies should consider their relationship with their auditors before...

Annual report of joint research for using heavy ion accelerator for cancer therapy of the fiscal year 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-04-01

The heavy ion project consisted of 2 parts; clinical studies using HIMAC and joint basic researches using it. The clinical studies have been satisfactorily progressed and the number of patients treated by HIMAC reached 230 in total by the end of the fiscal year 1996. In Japan, HIMAC is the only apparatus for heavy ion acceleration. Thus, a lot of concerns from not only the medical and biological fields, but also other fundamental fields are paid to HIMAC. Further, the beam of HIMAC has been attracting international concerns, especially in the fields such as simulation of cosmic environment by heavy ion beam, dose determination using the beam, international comparison of its biological effects, etc. The operating times of HIMAC in 1996 was ca. 4800 hours in total and of those ca. 2700 hours were used for joint researches. This annual report include 12 reports of clinical research group, 4 of diagnosis one 64 of biology one and 42 of physical and engineering one. (M.N.)

The German joint research project "concepts for future gravity satellite missions"

Science.gov (United States)

Reubelt, Tilo; Sneeuw, Nico; Fichter, Walter; Müller, Jürgen

2010-05-01

Within the German joint research project "concepts for future gravity satellite missions", funded by the Geotechnologies programme of the German Federal Ministry of Education and Research, options and concepts for future satellite missions for precise (time-variable) gravity field recovery are investigated. The project team is composed of members from science and industry, bringing together experts in geodesy, satellite systems, metrology, sensor technology and control systems. The majority of team members already contributed to former gravity missions. The composition of the team guarantees that not only geodetic aspects and objectives are investigated, but also technological and financial constraints are considered. Conversely, satellite, sensor and system concepts are developed and improved in a direct exchange with geodetic and scientific claims. The project aims to develop concepts for both near and mid-term future satellite missions, taking into account e.g. advanced satellite formations and constellations, improved orbit design, innovative metrology and sensor systems and advances in satellite systems.

Joint DOE-PNC research on the use of transparency in support of nuclear nonproliferation

International Nuclear Information System (INIS)

Mochiji, Toshiro; Keeney, R.; Tazaki, Makiko; Nakhleh, C.; Puckett, J.; Stanbro, W.

1999-01-01

PNC and LANL collaborated in research on the concept of transparency in nuclear nonproliferation. The research was based on the Action Sheet No. 21, which was signed in February 1996, ''The Joint Research on Transparency in Nuclear Nonproliferation'' under the ''Agreement between the Power Reactor and Nuclear Fuel Development Corporation of Japan (PNC) and the US Department of Energy (DOE) for Cooperation in Research and Development Concerning Nuclear Material Control and Accounting Measures for Safeguards and Nonproliferation''. The purpose of Action Sheet 21 is to provide a fundamental study on Transparency to clarify the means to improve worldwide acceptability for the nuclear energy from the nuclear nonproliferation point of view. This project consists of independent research and then joint discussion at workshops that address a series of topics and issues in transparency. The activities covered in Action Sheet 21 took place over a period of 18 months. Three workshops were held; the first and the third hosted by PNC in Tokyo, Japan and the second hosted by LANL in Los Alamos, New Mexico, US. The following is a summary of the three workshops. The first workshop addressed the policy environment of transparency. Each side presented its perspective on the following issues: (1) a definition of transparency, (2) reasons for transparency, (3) detailed goals of transparency and (4) obstacles to transparency. The topic of the second workshop was ''Development of Transparency Options.'' The activities accomplished were (1) identify type of facilities where transparency might be applied, (2) define criteria for applying transparency, and (3) delineate applicable transparency options. The goal of the third workshop, ''Technical Options for Transparency,'' was to (1) identify conceptual options for transparency system design; (2) identify instrumentation, measurement, data collection and data processing options; (3) identify data display options; and (4) identify technical

Report of joint utilization results in fiscal year 1994

International Nuclear Information System (INIS)

1995-01-01

Joint utilization seems to aim at the effective use of limited funds by concentrating facilities. There is a demerit that for doing experiment, it is necessary to take a trouble of going to the place. However by utilizing jointly one facility, there is the possibility of the occurrence of sympathizing phenomena directly connected to new ideas among researchers, and it is just the state joint utilization should be in. In fiscal year 1994, the Yayoi and the linac were put to joint utilization as expected, and many results of researches were obtained by the users. In this book, in addition to the report of the results of joint utilization, the report of the Yayoi research meetings held in fiscal year 1994 is included. Eight lectures on fast neutron science, the reports of joint utilization results of 15 Yayoi on-pile studies, 9 Yayoi off-pile studies and 16 linac studies, and the reports of 11 Yayoi research meetings are included in this book. The list of the events held in the Nuclear Engineering Research Laboratory, University of Tokyo, in fiscal year 1994, the list of the names of various committee members, and the list of the names of the persons in charge of joint utilization experiments are attached. (K.I.)

Fiscal 1998 international research cooperation project. Feasibility study report on excavation of international joint research seeds; 1998 nendo kokusai kyoryoku jigyo seika hokokusho. Kokusai kyodo kenkyu seeds hakkutsu no tame no FS chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Feasibility study (FS) was made on excavation of international joint research seeds for developed countries. As FS themes, 6 themes were selected among applied 11 ones. China was interested in the joint research on improvement of a cetane number by ring-opening of LCO from fluid catalytic crackers through hydrogenation for Arabian crude oil, although China has an experience for domestic one. Since France and the USA are in the early developmental stage of practical atmospheric temperature and pressure conversion technology of lower hydrocarbon after the basic research stage, study was made on the possibility of a joint research. The other themes are as follows: Oil resource and energy conservation technology by recycling general plastics and industrial synthetic resins, advanced solid catalyst regulating technology by physicochemical technique and its application to next-generation oil refining processes, structure analysis of asphaltene and reaction mechanism analysis of heavy oil by computer simulation, and production technology of ultra-precisely controlled catalytic materials. (NEDO)

Microbial transformation of coal and coal relevant structures - presentation of a BMBF joint research project

Energy Technology Data Exchange (ETDEWEB)

Sinder, C.; Schacht, S.; Pfeifer, F.; Klein, J. [DMT-Gesellschaft fuer Forschung und Pruefung mbH, Essen (Germany)

1997-12-31

Investigations in the joint research project `Microbial transformation of coal and coal relevant structures` supported by the Ministry of Education, Science, Research and Technology (BMBF) of the Federal Republic of Germany and coordinated by the DMT-Gesellschaft fuer Forschung und Pruefung mbH (DMT) are focussed on research and development of biotechnological coal conversion processes. Up to now investigations carried out in the project lead to a number of important results. During work on the project a great number of different microorganisms was found able to degrade or solubilize coal or lignite. Enzymatic as well as regulation mechanisms of the microbial depolymerization processes have been characterized successfully. (orig.)

Choosing sheep (Ovis aries) as animal model for temporomandibular joint research: Morphological, histological and biomechanical characterization of the joint disc.

Science.gov (United States)

Angelo, D F; Morouço, P; Alves, N; Viana, T; Santos, F; González, R; Monje, F; Macias, D; Carrapiço, B; Sousa, R; Cavaco-Gonçalves, S; Salvado, F; Peleteiro, C; Pinho, M

2016-12-01

Preclinical trials are essential to the development of scientific technologies. Remarkable molecular and cellular research has been done using small animal models. However, significant differences exist regarding the articular behavior between these models and humans. Thus, large animal models may be more appropriate to perform trials involving the temporomandibular joint (TMJ). The aim of this work was to make a morphological (anatomic dissection and white light 3D scanning system), histological (TMJ in bloc was removed for histologic analysis) and biomechanical characterization (tension and compression tests) of sheep TMJ comparing the obtained results with human data. Results showed that sheep processus condylaris and fossa mandibularis are anatomically similar to the same human structures. TMJ disc has an elliptical perimeter, thinner in the center than in periphery. Peripheral area acts as a ring structure supporting the central zone. The disc cells display both fibroblast and chondrocyte-like morphology. Marginal area is formed by loose connective tissue, with some chondrocyte-like cells and collagen fibers in diverse orientations. Discs obtained a tensile modulus of 3.97±0.73MPa and 9.39±1.67MPa, for anteroposterior and mediolateral assessment. The TMJ discs presented a compressive modulus (E) of 446.41±5.16MPa and their maximum stress value (σmax) was 18.87±1.33MPa. Obtained results suggest that these animals should be considered as a prime model for TMJ research and procedural training. Further investigations in the field of oromaxillofacial surgery involving TMJ should consider sheep as a good animal model due to its resemblance of the same joint in humans. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

A history of the collaboration between the European Organisation for Nuclear Research (CERN) and the Joint Institute for Nuclear Research (JINR), and with Soviet research institutes in the USSR 1955-1970

International Nuclear Information System (INIS)

Lock, W.O.

1975-01-01

The report describes in some detail the origins and development up to 1970 of the collaboration which now exists between the European Organization for Nuclear Research (CERN) and its counterpart the Joint Institute for Nuclear Research (JINR) at Dubna, USSR and also with the Institute for High Energy Physics, Serpukhov, USSR. Part 1 deals with the relations between JINR and CERN, their beginnings and the subsequent development of exchange of scientists, joint Summer Schools, and the organization of Seminars to discuss perspectives in high energy physics. Part 2 describes first the steps which led up to the signing of an Agreement between CERN and the State Committee of the USSR for the Utilization of Atomic Energy, governing collaboration between CERN and the Institute for High Energy Physics at Serpukhov. A brief account is then given of the subsequent installation of equipment built at CERN for the Institute's 76-Gev proton accelerator and the carrying out of joint physics experiments by teams from Western Europe and from the Soviet Union. Part 3 summarizes the origins of collaborative agreements which have been made by CERN with a few other leading Institutes in the Soviet Union. A number of Annexes reproduce some of the relevant documents and letters. (author)

Evaluation of the high-temperature materials programme of the Joint Research Centre (1980-85)

International Nuclear Information System (INIS)

Glenny, R.J.E.; Boehm, H.; Gellings, P.J.; Gobin, P.; Lanzavecchia, G.; Nicholaides, C.

1986-01-01

This report covers the findings of the external panel of experts set up to evaluate the results of the Community's programme in the field of high-temperature materials (1980-85), carried out at the Petten establishment of the Joint Research Centre. The evaluation covers the quality and relevance of the research, the usefulness of the results and the role played by the JRC in this field at the European level. The report describes and gives comments on the content, structure and management of the five projects constituting the current programme, outlines the methods and procedures used during the evaluation and gives a number of recommendations pertinent to future activities

Perceived coercion of noninstitutionalized elderly patients undergoing research for the diagnosis of temporomandibular joint dysfunction

Directory of Open Access Journals (Sweden)

Maria de Oliveira Alves Cavalcanti

Full Text Available OBJECTIVE: To evaluate perceived coercion (PC of noninstitutionalized elderly patients undergoing research for the diagnosis of temporomandibular joint dysfunction. METHOD: A cross-sectional study conducted with 1,112 elderly individuals aged 60 or older, enrolled in the Family Health Programme of the municipality of Areia, State of Paraíba, Brazil, from January to June 2013. The data collection tool was the Perceived Cohesion Scale (PSC. RESULTS: The participants were predominantly women (62.5% in the 60 to 69 age group (45.9%, illiterate (57.9% percent, married or in a common law marriage (54.1%, retired (83.6%, and receiving a monthly income under the minimum wage (72.0%. The average overall PC was 1.25+ 1.15 and Trend 1 (41,4%. There was a difference between the group of individuals who were literate, married and in a common law marriage and the members of the other groups. CONCLUSION: Results showed that the elderly patients were minimally coerced when deciding whether to participate in research for diagnosing temporomandibular joint dysfunction. They also revealed a significant association of PC with literacy and marital status.

Research on Joint Parameter Inversion for an Integrated Underground Displacement 3D Measuring Sensor

Directory of Open Access Journals (Sweden)

Nanying Shentu

2015-04-01

Full Text Available Underground displacement monitoring is a key means to monitor and evaluate geological disasters and geotechnical projects. There exist few practical instruments able to monitor subsurface horizontal and vertical displacements simultaneously due to monitoring invisibility and complexity. A novel underground displacement 3D measuring sensor had been proposed in our previous studies, and great efforts have been taken in the basic theoretical research of underground displacement sensing and measuring characteristics by virtue of modeling, simulation and experiments. This paper presents an innovative underground displacement joint inversion method by mixing a specific forward modeling approach with an approximate optimization inversion procedure. It can realize a joint inversion of underground horizontal displacement and vertical displacement for the proposed 3D sensor. Comparative studies have been conducted between the measured and inversed parameters of underground horizontal and vertical displacements under a variety of experimental and inverse conditions. The results showed that when experimentally measured horizontal displacements and vertical displacements are both varied within 0 ~ 30 mm, horizontal displacement and vertical displacement inversion discrepancies are generally less than 3 mm and 1 mm, respectively, under three kinds of simulated underground displacement monitoring circumstances. This implies that our proposed underground displacement joint inversion method is robust and efficient to predict the measuring values of underground horizontal and vertical displacements for the proposed sensor.

The joint project for high-intensity proton accelerators

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

Japan Atomic Energy Research Institute (JAERI) and the High Energy Accelerator Research Organization (KEK) agreed to promote the joint project integrating both the Neutron Science Project (NSP) of JAERI and the Japan Hadron Facility Project (JHF) of KEK for comprehensive studies on basic science and technology using high-intensity proton accelerator. This document describes the joint proposal prepared by the Joint Project Team of JAERI and KEK to construct accelerators and research facilities necessary both for the NSP and the JHF at the site of JAERI Tokai Establishment. (author)

The joint FAO and IAEA programme

International Nuclear Information System (INIS)

Fried, M.; Lamm, C.G.

1981-01-01

In 1964 the FAO and IAEA decided to establish a joint programme for the specific purpose of assisting Member States in applying nuclear techniques to develop their food and agriculture. As a result, the Joint FAO/IAEA Division of Isotope and Radiation Applications of Atomic Energy and Agriculture Development was established. The objectives of this joint FAO/IAEA programme are to exploit the potential of isotopes and radiation applications in research and development to increase and stabilize agriculture production, to reduce production costs, to improve the quality of food, to protect agricultural products from spoilage and losses, and to minimize pollution of food and agricultural environment. The activities of the joint programme, which are briefly described, can be grouped under three main headings: co-ordination and support of research; technical assistance including training; and dissemination of information. Tables are shown giving a breakdown of 311 research contracts and agreements held with institutes in Member States and 86 technical assistance projects in 46 developing countries, providing training, expertise and specialized equipment

Oxide dispersion strengthened ferritic steels: a basic research joint program in France

Science.gov (United States)

Boutard, J.-L.; Badjeck, V.; Barguet, L.; Barouh, C.; Bhattacharya, A.; Colignon, Y.; Hatzoglou, C.; Loyer-Prost, M.; Rouffié, A. L.; Sallez, N.; Salmon-Legagneur, H.; Schuler, T.

2014-12-01

AREVA, CEA, CNRS, EDF and Mécachrome are funding a joint program of basic research on Oxide Dispersion Strengthened Steels (ODISSEE), in support to the development of oxide dispersion strengthened 9-14% Cr ferritic-martensitic steels for the fuel element cladding of future Sodium-cooled fast neutron reactors. The selected objectives and the results obtained so far will be presented concerning (i) physical-chemical characterisation of the nano-clusters as a function of ball-milling process, metallurgical conditions and irradiation, (ii) meso-scale understanding of failure mechanisms under dynamic loading and creep, and, (iii) kinetic modelling of nano-clusters nucleation and α/α‧ unmixing.

Oxide dispersion strengthened ferritic steels: a basic research joint program in France

Energy Technology Data Exchange (ETDEWEB)

Boutard, J.-L., E-mail: jean-louis.boutard@cea.fr [Cabinet du Haut-Commissaire, CEA/Saclay, 91191 Gif sur Yvette Cedex (France); Badjeck, V. [LPS, UMR CNRS 8502, Building 510, Université Paris-Sud 11, 91405 Orsay Cedex (France); Barguet, L. [LAUM, UMR CNRS 6613, Building IAM – UFR Sciences, Avenue O. Messiaen, 72085 Le Mans Cedex 9 (France); Barouh, C. [DMN/SRMP, CEA/Saclay, Building 520, 91191 Gif sur Yvette Cedex (France); Bhattacharya, A. [DMN/SRMP, CEA/Saclay, Building 520, 91191 Gif sur Yvette Cedex (France); CSNSM, UMR CNRS 8609, Université Paris-Sud 11, Buildings 104 and 108, 91405 Orsay Campus (France); Colignon, Y. [IM2NP, UMR CNRS 7334, Case 142, Faculté des Sciences, Campus de Saint Jérôme, Aix Marseille Université, 13397 Marseille Cedex 20 (France); Hatzoglou, C. [GPM, UMR CNRS 6634, Technopôle du Madrillet, Avenue de l’Université, BP12, 76801 Saint Etienne du Rouvray Cedex (France); Loyer-Prost, M. [DMN/SRMP, CEA/Saclay, Building 520, 91191 Gif sur Yvette Cedex (France); Rouffié, A.L. [DMN/SRMA, CEA/Saclay, Building 455, 91191 Gif sur Yvette Cedex (France); Sallez, N. [SIMAP, UMR CNRS 5266, INPG, Domaine Universitaire, 1130 rue de la Piscine, BP75, 38402 Saint Martin d’Hères Cedex (France); Salmon-Legagneur, H. [DMN/SRMA, CEA/Saclay, Building 455, 91191 Gif sur Yvette Cedex (France); Schuler, T. [DMN/SRMP, CEA/Saclay, Building 520, 91191 Gif sur Yvette Cedex (France)

2014-12-15

AREVA, CEA, CNRS, EDF and Mécachrome are funding a joint program of basic research on Oxide Dispersion Strengthened Steels (ODISSEE), in support to the development of oxide dispersion strengthened 9–14% Cr ferritic–martensitic steels for the fuel element cladding of future Sodium-cooled fast neutron reactors. The selected objectives and the results obtained so far will be presented concerning (i) physical–chemical characterisation of the nano-clusters as a function of ball-milling process, metallurgical conditions and irradiation, (ii) meso-scale understanding of failure mechanisms under dynamic loading and creep, and, (iii) kinetic modelling of nano-clusters nucleation and α/α′ unmixing.

Oxide dispersion strengthened ferritic steels: a basic research joint program in France

International Nuclear Information System (INIS)

Boutard, J.-L.; Badjeck, V.; Barguet, L.; Barouh, C.; Bhattacharya, A.; Colignon, Y.; Hatzoglou, C.; Loyer-Prost, M.; Rouffié, A.L.; Sallez, N.; Salmon-Legagneur, H.; Schuler, T.

2014-01-01

AREVA, CEA, CNRS, EDF and Mécachrome are funding a joint program of basic research on Oxide Dispersion Strengthened Steels (ODISSEE), in support to the development of oxide dispersion strengthened 9–14% Cr ferritic–martensitic steels for the fuel element cladding of future Sodium-cooled fast neutron reactors. The selected objectives and the results obtained so far will be presented concerning (i) physical–chemical characterisation of the nano-clusters as a function of ball-milling process, metallurgical conditions and irradiation, (ii) meso-scale understanding of failure mechanisms under dynamic loading and creep, and, (iii) kinetic modelling of nano-clusters nucleation and α/α′ unmixing

Biologically Weighted Quantities in Radiotherapy: an EMRP Joint Research Project

Directory of Open Access Journals (Sweden)

Rabus Hans

2014-01-01

Full Text Available Funded within the European Metrology Research Programme (EMRP [1], the joint research project “Biologically weighted quantities in radiotherapy” (BioQuaRT [2] aims to develop measurement and simulation techniques for determining the physical properties of ionising particle tracks on different length scales (about 2 nm to 10 μm, and to investigate the correlation of these track structure characteristics with the biological effects of radiation at the cellular level. Work package 1 develops micro-calorimeter prototypes for the direct measurement of lineal energy and will characterise their response for different ion beams by experiment and modelling. Work package 2 develops techniques to measure particle track structure on different length scales in the nanometre range as well as a measurement device integrating a silicon microdosimeter and a nanodosimeter. Work package 3 investigates the indirect effects of radiation based on probes for quantifying particular radical and reactive oxygen species (ROS. Work package 4 focuses on the biological aspects of radiation damage and will produce data on initial DNA damage and late effects for radiotherapy beams of different qualities. Work package 5 provides evaluated data sets of DNA cross-sections and develops a multi-scale model to address microscopic and nanometric track structure properties. The project consortium includes three linked researchers holding so-called Researcher Excellence Grants, who carry out ancillary investigations such as developing and benchmarking a new biophysical model for induction of early radiation damage and developing methods for the translation of quantities derived from particle track structure to clinical applications in ion beam therapy.

Research on Deep Joints and Lode Extension Based on Digital Borehole Camera Technology

Directory of Open Access Journals (Sweden)

Han Zengqiang

2015-09-01

Full Text Available Structure characteristics of rock and orebody in deep borehole are obtained by borehole camera technology. By investigating on the joints and fissures in Shapinggou molybdenum mine, the dominant orientation of joint fissure in surrounding rock and orebody were statistically analyzed. Applying the theory of metallogeny and geostatistics, the relationship between joint fissure and lode’s extension direction is explored. The results indicate that joints in the orebody of ZK61borehole have only one dominant orientation SE126° ∠68°, however, the dominant orientations of joints in surrounding rock were SE118° ∠73°, SW225° ∠70° and SE122° ∠65°, NE79° ∠63°. Then a preliminary conclusion showed that the lode’s extension direction is specific and it is influenced by joints of surrounding rock. Results of other boreholes are generally agree well with the ZK61, suggesting the analysis reliably reflects the lode’s extension properties and the conclusion presents important references for deep ore prospecting.

Summary of joint researches with universities for fiscal 2001. Except public subscription type nuclear cycle researches and proceeding basic engineering researches

International Nuclear Information System (INIS)

2002-07-01

A summary of ten researches is reported in this report. The subjects of studies are as followings; 1) the transfer rate of nuclide in the nuclear fuel recycle system, 2) burn up behavior of sodium drop, 3) high advance in evaluation method of crack growth of FBR plant, 4) multidimensional analysis of vapor-liquid phase flow in the evaporator helical coil, 5) a joint research of corrosion test of liquid lead and bismuth eutectic alloy, 6) separation of ruthenium from high level radioactive waste and it's behavior in the fused glass, 7) improvement and long lifetime of control rod by high power millimeter wave ceramics sintering method, 8) development of fatigue test equipment in order to make clear ultra long lifetime fatigue strength properties under high temperature, 9) evaluation of solubility of metal elements in lead bismuth eutectic (LBE) under the condition of control of oxygen concentration, 10) evaluation of solubility of metal elements in LBE under the condition of very low oxygen potential. (S.Y.)

ECOWindS Joint Action Plan

DEFF Research Database (Denmark)

2014-01-01

The Joint Action Plan (JAP) is a deliverable of the ECOWindS project Work Package 4 (WP4) “Joint Action Plan”. It presents a plan of action or a roadmap for research, development, and innovation (RDI) for the Offshore Wind Service (OWS) industry. The objective of the JAP is to be an international...

Assessment of Intellectual Capital in Joint-Stock Companies

Directory of Open Access Journals (Sweden)

Rima Tamošiūnienė

2015-12-01

Full Text Available The evaluation of intellectual capital factors is an essential part for the management of joint-stock companies. Many authors indicate that successful intellectual capital management increases value added in joint-stock companies. Nevertheless, intellectual capital is a complex and challenging concept as there is still no clear guidance, what the intellectual capital features and its structural parts are. Theoretical research revealed that scientists accentuate various intellectual capital parts depending basically on the type of their research, on the level of the research (micro, mezzo, macro, variables they selected to investigate and similar. This research paper gives an insight what drivers can be increasing value added in joint-stock companies.

Achievement reports on joint research of solar energy power generation field test project in fiscal 1997. Part 2 of 3; 1997 nendo taiyoko hatsuden field test jigyo kyodo kenkyu seika hokokusho 2/3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

This report is a collection of 26 achievement reports on joint research of a solar energy power generation field test project. The major contents of the achievement reports relate to the solar energy power generation field test project (summarized as manufacture and installation of solar energy power generation systems, summary of solar energy power generation facilities, peripheral devices, and daily schedule of the construction). The reports describe achievements of the joint research (names and achievements of the joint research, study presentation, lectures, literatures, status of patents, similar research in and cooperation with other research institutions), generalization of the research, and future problems. Locations of the joint research carried out are libraries, kindergartens, health and welfare centers, children's culture centers, general traffic centers, primary and middle schools, river water purifying facilities, credit banks, manufactories, retail shops at car parking areas, office buildings, hospitals, joint prefectural office buildings, municipal health centers, and prefectural general power generation control stations. (NEDO)

Research on advanced technology of performance assessment for geological disposal of high-level radioactive waste (Joint research)

International Nuclear Information System (INIS)

2006-12-01

JAEA and RWMC have carried out a joint research program on advanced technologies that could be used to support performance assessments of geological disposal concepts for high-level radioactive waste. The following 5 items were considered in the program: 1) planning of a basic strategy for the development of analysis technologies on nuclide migration over various spatial and temporal scales; 2) development of analysis technologies for vitrified waste scale; 3) development of analysis technologies for repository scale; 4) development of integration technologies for geochemical information; and 5) development of technologies to promote the logical understanding of repository performance and safety. The above items were discussed in the context of technological experiences gained by JAEA and RWMC in previous repository-related studies. According to the results of these discussions, development strategies for each of the technology areas identified above were efficiently formulated by appropriate task allocations. Specific technical subjects requiring further investigation were also identified using this approach, and potential feed-backs from the results of these investigations into the overall research plan and strategy were considered. These specific research and development subjects in the overall strategy defined by this project should be implemented in the future. (author)

Preliminary reports on fiscal 2000 results of project for subsidizing international joint research; 2000 nendo kokusai kyodo kenkyu josei jigyo seika hokoku kai yokoshu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-12-01

This paper presents preliminary reports on fiscal 2000 results of project for subsidizing international joint research sponsored by NEDO. For international joint research teams doing excellent studies, their research expenses are subsidized, thereby promoting international research exchange, enhancing international level of industrial technology and contributing to the formation of basis for innovative industrial technology. The projects relating to the global environmental field are implemented jointly with RITE. The contents of the report to be published are, in the global environmental field (practicability study), development of oil substitute resources, reproducible resources, and technologies for producing polymeric and plastic materials benign to the earth by microorganism using carbon dioxide. In the substance/material field, the contents of the report are innovative production and device application of tunable photonic crystals using electronic penetration network; development of new synthesis process of innovative nitride, creation and theoretical calculation of electromagnetic function; studies on quantum transportation in superconductor and semiconductor bonding structures; and studies on quantum liquid and solid, and application to materials science and technology. (NEDO)

Tsinghua-Johns Hopkins Joint Center for Biomedical Engineering Research: scientific and cultural exchange in undergraduate engineering.

Science.gov (United States)

Wisneski, Andrew D; Huang, Lixia; Hong, Bo; Wang, Xiaoqin

2011-01-01

A model for an international undergraduate biomedical engineering research exchange program is outlined. In 2008, the Johns Hopkins University in collaboration with Tsinghua University in Beijing, China established the Tsinghua-Johns Hopkins Joint Center for Biomedical Engineering Research. Undergraduate biomedical engineering students from both universities are offered the opportunity to participate in research at the overseas institution. Programs such as these will not only provide research experiences for undergraduates but valuable cultural exchange and enrichment as well. Currently, strict course scheduling and rigorous curricula in most biomedical engineering programs may present obstacles for students to partake in study abroad opportunities. Universities are encouraged to harbor abroad opportunities for undergraduate engineering students, for which this particular program can serve as a model.

Report of researches by joint use of Kyoto University Research Reactor Institute in the first half of the fiscal year 1979

International Nuclear Information System (INIS)

1981-03-01

This is the biannual report of 55 research items by the joint use of the reactor, each item being written in a page. The number of items decreased by 14 as compared with the items in the second half of the fiscal year of 1978. The research items are roughly classified into 16 items related to chemistry, 11 items to physics, 15 items to biology and medicine, 5 items to metallurgy, 4 items to geology, and other 4 items. It can be said that the ratio of the items related to biology and medicine among the whole items has increased as the total number decreased. Also, the number of the items concerning activation analysis reached 7. (Wakatsuki, Y.)

Instrumental Supporting System for Developing and Analysis of Software-Defined Networks of Mobile Objects

Directory of Open Access Journals (Sweden)

V. A. Sokolov

2015-01-01

Full Text Available This article describes the organization principles for wireless mesh-networks (software-defined net-works of mobile objects. The emphasis is on the questions of getting effective routing algorithms for such networks. The mathematical model of the system is the standard transportation network. The key parameter of the routing system is the node reachability coefficient — the function depending on several basic and additional parameters (“mesh-factors”, which characterize the route between two network nodes. Each pair (arc, node is juxtaposed to a composite parameter which characterizes the “reacha-bility” of the node by the route which begins with this arc. The best (“shortest” route between two nodes is the route with the maximum reachability coefficient. The rules of building and refreshing the routing tables by the network nodes are described. With the announcement from the neighbor the node gets the information about the connection energy and reliability, the announcement time of receipt, the absence of transitional nodes and also about the connection capability. On the basis of this informationthe node applies the penalization (decreasing the reachability coefficient or the reward (increasing the reachability coefficient to all routes through this neighbor node. The penalization / reward scheme has some separate aspects: 1. Penalization for the actuality of information. 2. Penalization / reward for the reliability of a node. 3. Penalization for the connection energy. 4. Penalization for the present connection capability. The simulator of the wireless mesh-network of mobile objects is written. It is based on the suggested heuristic algorithms. The description and characteristics of the simulator are stated in the article. The peculiarities of its program realization are also examined.

Report on a joint research project. Japan and the Republic of Kazakhstan

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

A joint research project was agreed between the Metal Mining Industry Association of Japan and the Non-ferrous Metal Mining Research Institute for the Eastern Region of the Republic of Kazakhstan on March 15,1995. The project is intended to extract from low-grade ores and mine refuses such useful metals as gold, silver, copper and rare metals by using a method harmonious with environment. Tests and researches are being performed targeting the completion in fiscal 2000. This paper reports the achievements attained in fiscal 1997. Detailed descriptions are given in the report on the column percolation test and the mechanical stirring percolation test for low-grade ores in Nikolayevska, and the mechanical stirring percolation test for mine refuses in Zhezkent. In addition, for the bacteria percolation test, the paper reports execution of the bacteria culture test, and the fundamental percolating condition test using concentrated copper solution. Furthermore, fundamental zinc extraction tests in an extraction test and a reversal extraction test, analysis of gold and silver, a percolation test thereon by using cyanide, and analysis of waste solution were performed with related discussions. (NEDO)

Achievement reports on joint research of solar energy power generation field test project in fiscal 1997. Part 3 of 3; 1997 nendo taiyoko hatsuden field test jigyo kyodo kenkyu seika hokokusho 3/3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

This report is a collection of 40 achievement reports on joint research of a solar energy power generation field test project. The major contents of the achievement reports relate to the solar energy power generation field test project (summarized as manufacture and installation of solar energy power generation systems, summary of solar energy power generation facilities, status of installation of solar cells, peripheral devices, and daily schedule of the construction). The reports describe achievements of the joint research (names and achievements of the joint research, study presentation, lectures, literatures, status of patents, similar research in and cooperation with other research institutions), generalization of the research, and future problems. Locations of the joint research carried out are hospitals, township hospitals, a science hall for youths, study and educational cities, primary schools, middle schools, high schools, universities, senior health centers, a life cooperative association, retails shops, factories, office buildings, joint governmental office buildings, Shinkansen stations, prefectural industrial testing centers, health and welfare centers, FM broadcasting studios, a town operated hall of technologies, prefectural office buildings and training centers. (NEDO)

Space shuttle SRM field joint: Review paper

Directory of Open Access Journals (Sweden)

S. Mohammad Gharouni

2014-09-01

Full Text Available Due to Challenger space shuttle accident in 1986, significant research has been done concerning structural behavior of field joints in solid rocket boosters (SRB. The structural deformations between the clevis inner leg and the tang (male-to-female parts of joint, the sealing of the O-ring to prevent the hot gas in joints, has been neglected causing the failure of the vehicle. Redesigning the field joint in SRB engine by accurate analysis of dynamic and thermal loads and by design of insulator and good O-ring, the leakiness of combustion hot gases was eliminated. Some parts of field joint such as capture feature (CF and its third O-ring, J-leg insulator and shim were added to redesigned field joint. Also, some adjustments in sealing system and pins were done to promote the efficiency of the field joint. Due to different experimental analysis on assembled field joints with default imperfections, redesigned joints operated well. These redesigned field joints are commonly used in aerospace and mechanical structures. This paper investigates the original and the redesigned field joints with additional explanations of different parts of the redesigned joints.

Joint Assessment of ETRR-2 Research Reactor Operations Program, Capabilities, and Facilities

International Nuclear Information System (INIS)

Bissani, M; O'Kelly, D S

2006-01-01

A joint assessment meeting was conducted at the Egyptian Atomic Energy Agency (EAEA) followed by a tour of Egyptian Second Research Reactor (ETRR-2) on March 22 and 23, 2006. The purpose of the visit was to evaluate the capabilities of the new research reactor and its operations under Action Sheet 4 between the U.S. DOE and the EAEA, ''Research Reactor Operation'', and Action Sheet 6, ''Technical assistance in The Production of Radioisotopes''. Preliminary Recommendations of the joint assessment are as follows: (1) ETRR-2 utilization should be increased by encouraging frequent and sustained operations. This can be accomplished in part by (a) Improving the supply-chain management for fresh reactor fuel and alleviating the perception that the existing fuel inventory should be conserved due to unreliable fuel supply; and (b) Promulgating a policy for sample irradiation priority that encourages the use of the reactor and does not leave the decision of when to operate entirely at the discretion of reactor operations staff. (2) Each experimental facility in operation or built for a single purpose should be reevaluated to focus on those that most meet the goals of the EAEA strategic business plan. Temporary or long-term elimination of some experimental programs might be necessary to provide more focused utilization. There may be instances of emerging reactor applications for which no experimental facility is yet designed or envisioned. In some cases, an experimental facility may have a more beneficial use than the purpose for which it was originally designed. For example, (a) An effective Boron Neutron Capture Therapy (BNCT) program requires nearby high quality medical facilities. These facilities are not available and are unlikely to be constructed near the Inshas site. Further, the BNCT facility is not correctly designed for advanced research and therapy programs using epithermal neutrons. (b) The ETRR-2 is frequently operated to provide color-enhanced gemstones but is

Joint Assessment of ETRR-2 Research Reactor Operations Program, Capabilities, and Facilities

Energy Technology Data Exchange (ETDEWEB)

Bissani, M; O' Kelly, D S

2006-05-08

A joint assessment meeting was conducted at the Egyptian Atomic Energy Agency (EAEA) followed by a tour of Egyptian Second Research Reactor (ETRR-2) on March 22 and 23, 2006. The purpose of the visit was to evaluate the capabilities of the new research reactor and its operations under Action Sheet 4 between the U.S. DOE and the EAEA, ''Research Reactor Operation'', and Action Sheet 6, ''Technical assistance in The Production of Radioisotopes''. Preliminary Recommendations of the joint assessment are as follows: (1) ETRR-2 utilization should be increased by encouraging frequent and sustained operations. This can be accomplished in part by (a) Improving the supply-chain management for fresh reactor fuel and alleviating the perception that the existing fuel inventory should be conserved due to unreliable fuel supply; and (b) Promulgating a policy for sample irradiation priority that encourages the use of the reactor and does not leave the decision of when to operate entirely at the discretion of reactor operations staff. (2) Each experimental facility in operation or built for a single purpose should be reevaluated to focus on those that most meet the goals of the EAEA strategic business plan. Temporary or long-term elimination of some experimental programs might be necessary to provide more focused utilization. There may be instances of emerging reactor applications for which no experimental facility is yet designed or envisioned. In some cases, an experimental facility may have a more beneficial use than the purpose for which it was originally designed. For example, (a) An effective Boron Neutron Capture Therapy (BNCT) program requires nearby high quality medical facilities. These facilities are not available and are unlikely to be constructed near the Inshas site. Further, the BNCT facility is not correctly designed for advanced research and therapy programs using epithermal neutrons. (b) The ETRR-2 is frequently operated to

Proceedings of second JAERI-JNC joint conference on nuclear safety research

International Nuclear Information System (INIS)

Sugimoto, Jun; Anoda, Yoshinari; Araya, Fumimasa; Yamaguchi, Toshio

2004-08-01

The second JAERI-JNC Joint Conference on Nuclear Safety Research was held on February 6, 2004 in Tokyo for those who are relevant to nuclear industries and regulatory organizations, and general public. The nuclear safety research has been conducted in both institutes according to the Five-Year Program for Nuclear Safety Research established periodically by the Nuclear Safety Commission (NSC) and needs from the regulatory organizations. The objectives of the conference are to present its recent results and to collect views and opinions from the participants for its future program through the discussion after each presentation and panel discussion on how to conduct efficiently the nuclear safety in the New Organization. A total of 259 people participated in the conference mainly from the nuclear industries and regulatory organizations and the number was much larger than that in the last conference of 188. The conference consisted of presentations on the safety research results, a special lecture and a panel discussion. First, the overview of safety research results was presented from each institute. Then, the results in the field of nuclear installations, environmental radioactivity and radioactive waste were presented from each institute. Then, Dr. Higashi, the Nuclear Safety Commissioner, made a special lecture on the radiation protection from the high-level radioactive waste disposal. Finally, a panel discussion was conducted with the title of ''how to conduct efficiently the nuclear safety research in the New Organization'' chaired by Prof. Kimura, the chairperson of Standing Committee on Nuclear Safety Research under the NSC. The panelists from the regulatory organizations, nuclear industry, JAERI and JNC discussed the subject together with the participants on the floor. The panelists not from JAERI and JNC expressed their views and opinions on how to conduct efficiently the nuclear safety research in the New Organization that were valuable inputs for developing

Does generalized joint hypermobility predict joint injury in sport? A review.

LENUS (Irish Health Repository)

Donaldson, Peter R

2012-02-01

OBJECTIVE: To determine whether persons with generalized joint hypermobility have an increased risk of lower limb joint injury during sport. DATA SOURCES: PubMed, CINAHL, EMBASE, and SportDiscus were searched through February 2009, without language restrictions, using terms related to risk; hip, ankle, and knee injuries; and joint instability. Reference lists of included studies and relevant reviews were searched by hand. STUDY SELECTION: Selection criteria were peer-reviewed studies with a prospective design that used an objective scale to measure generalized joint hypermobility; the participants were engaged in sport activity, and the injury data were quantitative and based on diagnosis by a health professional, were self-reported, or resulted in time lost to athletic participation. The studies were screened by 1 researcher and checked by a second. Study methods were independently assessed by 2 investigators using the 6-point scale for prognostic studies developed by Pengel. Disagreements were resolved through discussion. Of 4841 studies identified, 18 met inclusion criteria. Of these, 8 were included in random-effects meta-analyses. DATA EXTRACTION: The data extracted by 2 reviewers included participant and sport characteristics and details of joint hypermobility and injury measurements. More detailed data for 4 investigations were obtained from the study authors. Where possible, hypermobility was defined as >\\/=4 of 9 points on the British Society of Rheumatology Scale (BSRS). MAIN RESULTS: Lower limb joint injuries (3 studies, 1047 participants) occurred in 14% of participants. Using the BSRS of joint hypermobility, any lower limb injury was not associated with hypermobility [odds ratio (OR), 1.43; 95% confidence interval (CI), 0.56-3.67]. Using the original authors\\' definitions, hypermobility was associated with risk of knee joint injuries (OR, 2.62; 95% CI, 1.04-6.58) in 5 studies. In 4 studies in which the BSRS could be used (1167 participants; incidence

Cooperative Engineering as a Joint Action

Science.gov (United States)

Joffredo-Le Brun, Sophie; Morellato, Mireille; Sensevy, Gérard; Quilio, Serge

2018-01-01

This paper describes some elements of a specific kind of design-based research, cooperative engineering. In the first part of the paper, we argue that cooperative engineering can be analyzed through a joint action framework. We first present some conceptual tools that the Joint Action Theory in Didactics proposes in order to understand didactic…

Discuss the value of T2 relaxation time in the research of femorotibial joint biological tissue

International Nuclear Information System (INIS)

Zhong Jinglian; Song Lingling; Liang Biling; Ye Ruixin; Yun Wenjuan

2009-01-01

Objective: To discuss the value of T 2 relaxation time in the research of the biomechanics and function of cartilage of knee joint. Methods: Knees of 20 healthy adults and 19 osteoarthritis patients were examined with sagittal 8-echo sequence. The T 2 value of cartilage was calculated. The T 2 values in the superficial and deeper cartilage of femoral and tibial joint were compared, so did between the osteoarthritis patients and healthy adults. Results: The T 2 values in the superficial and the deeper tibital cartilage were (48.8±6.3) ms, (44.3±5.7) ms, respectively. The T 2 values in the superficial and deeper femoral cartilage were (52.1±5.7) ms, (47.7±5.3) ms, respectively. There was a significant difference between superficial and deeper femoral cartilage (t=3.148 and t=3.384, P 2 value in the tibial cartilage of osteoarthritis patients was (56.0±9.1) ms and was higher than that of healthy adults. There was a significant difference between osteoarthritis patients and healthy adults (t=-3.446, P 2 relaxation time can be used in the research of the biomechanics and function of cartilage and has a application value in clinical diagnosis. (authors)

Solder joint technology materials, properties, and reliability

CERN Document Server

Tu, King-Ning

2007-01-01

Solder joints are ubiquitous in electronic consumer products. The European Union has a directive to ban the use of Pb-based solders in these products on July 1st, 2006. There is an urgent need for an increase in the research and development of Pb-free solders in electronic manufacturing. For example, spontaneous Sn whisker growth and electromigration induced failure in solder joints are serious issues. These reliability issues are quite complicated due to the combined effect of electrical, mechanical, chemical, and thermal forces on solder joints. To improve solder joint reliability, the science of solder joint behavior under various driving forces must be understood. In this book, the advanced materials reliability issues related to copper-tin reaction and electromigration in solder joints are emphasized and methods to prevent these reliability problems are discussed.

Joint attention, social cognition and recognition memory in adults

Directory of Open Access Journals (Sweden)

Kwanguk eKim

2012-06-01

Full Text Available The early emerging capacity for Joint Attention, or socially coordinated visual attention, is thought to be integral to the development of social-cognition in childhood. Recent studies have also begun to suggest that joint attention affects adult cognition as well, but methodological limitations hamper research on this topic. To address this issue we developed a novel virtual reality (VR paradigm that integrates eye-tracking and virtual avatar technology to measure two types of joint attention in adults, Initiating Joint Attention (IJA and Responding to Joint Attention (RJA. Distinguishing these types of joint attention in research is important because they are thought to reflect unique, as well as common constellations of processes involved in human social-cognition and social learning. We tested the validity of the differentiation of IJA and RJA in our paradigm in two studies of picture recognition memory in undergraduate students. Study 1 indicated that young adults correctly identified more pictures they had previously viewed in an IJA condition (67% than in a RJA (58% condition, η2 = .57. Study 2 controlled for IJA and RJA stimulus viewing time differences, and replicated the findings of Study 1. The implications of these results for the validity of the paradigm and research on the affects of joint attention on adult social-cognition are discussed.

Influence of Different Hip Joint Centre Locations on Hip and Knee Joint Kinetics and Kinematics During the Squat

Directory of Open Access Journals (Sweden)

Sinclair Jonathan

2014-12-01

Full Text Available Identification of the hip joint centre (HJC is important in the biomechanical examination of human movement. However, there is yet to be any published information regarding the influence of different HJC locations on hip and knee joint kinetics during functional tasks. This study aimed to examine the influence of four different HJC techniques on 3- D hip and knee joint kinetics/kinematics during the squat. Hip and knee joint kinetics/kinematics of the squat were obtained from fifteen male participants using an eight camera motion capture system. The 3-D kinetics/kinematics of the squat were quantified using four hip joint centre estimation techniques. Repeated measures ANOVAs were used to compare the discrete parameters as a function of each HJC location. The results show that significant differences in joint angles and moment parameters were evident at both the hip and knee joint in the coronal and transverse planes. These observations indicate that when calculating non-sagittal joint kinetics/kinematics during the squat, researchers should carefully consider their HJC method as it may significantly affect the interpretation of their data.

Joint research centre fusion materials irradiations in HFR: Present status and prospectives

International Nuclear Information System (INIS)

Casini, G.; Fenici, P.

1989-01-01

First a review is made of the Joint Research Centre experimental activity at HFR-Petten in the frame of the Fusion Technology and Safety Programme. The materials under investigation are: Cr-Ni Austenitic steels (316-L type) and Cr-Mn Austenitic steels (AMCR and FI type) as structural materials and Pb-17Li eutetic as tritium breeding material. The experiments on structural materials comprise: Sample irradiations with post-irradiation tensile tests (FRUST) Sample irradiations under constant load and post-irradiation strain measurement (TRIESTE) On-line creep tests (CRISP). The experiments on Pb-17Li breeder material regard sample irradiations to investigate tritium production and recovery as well as tritium permeation through blanket structures (LIBRETTO Experiment). Both irradiations on structural and breeding materials will be pursued up to the end of the current JRC-Multiannual Programme (1988-1991) and even further. In the last part of the paper expected developments of the testing programme at HFR are discussed. New areas of research should involve materials for divertor applications (NET/ITER) and advanced low activation composite materials for Commercial Power Reactors

Summary of Work for Joint Research Interchanges with DARWIN Integrated Product Team

Science.gov (United States)

Hesselink, Lambertus

1999-01-01

The intent of Stanford University's SciVis group is to develop technologies that enabled comparative analysis and visualization techniques for simulated and experimental flow fields. These techniques would then be made available un- der the Joint Research Interchange for potential injection into the DARWIN Workspace Environment (DWE). In the past, we have focused on techniques that exploited feature based comparisons such as shock and vortex extractions. Our current research effort focuses on finding a quantitative comparison of general vector fields based on topological features. Since the method relies on topological information, grid matching an@ vector alignment is not needed in the comparison. This is often a problem with many data comparison techniques. In addition, since only topology based information is stored and compared for each field, there is a significant compression of information that enables large databases to be quickly searched. This report will briefly (1) describe current technologies in the area of comparison techniques, (2) will describe the theory of our new method and finally (3) summarize a few of the results.

Research on elaboration of the evaluation guidelines for activities implemented jointly; Kyodo jisshi katsudo hyoka guide line sakutei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Elaboration of the evaluation guidelines for activities implemented jointly (AIJ) was researched to prevent the earth from warming. AIJ is the means to globally promote countermeasures against global warming cost-effectively by optimally combining every country`s technology, know-how and fund. AIJ was established in the 1st Conference of the Parties (COPI) of the United Nations Framework Convention on Climate Change in March, 1995. The pilot phase of AIJ is first carried out by voluntary workers jointly with developing countries under the agreement of the parties. The current situation of activities is reported in COPI as materials for evaluation of AIJ. To promote AIJ, elaboration of the evaluation guidelines for AIJ Japan program is also necessary for Japan. This research arranged the contents of the evaluation guidelines and the method of classifying projects for AIJ Japan program, and carried out some case studies of promising projects to reduce greenhouse gas emission for future proposal. 3 figs., 31 tabs.

Designing and Managing Successful International Joint Development Programs

Science.gov (United States)

2016-04-30

joint development programs are important because of their potential to reduce costs and increase partnership benefits such as interoperability, economies ...have actualized by discussing what characteristics research has shown as crucial to international joint development program outcomes. The study team... characteristics of international joint development programs that result in positive or negative cost, scheduling, and end-product outcomes, such as a final

JAERI-KEK joint project on high intensity proton accelerators

International Nuclear Information System (INIS)

Nagamiya, Shoji

2000-01-01

Japan Atomic Energy Research Institute (JAERI) and the High Energy Accelerator Organization (KEK) are promoting the joint project integrating both the Neutron Science Project (NSP) of JAERI and the Japan Hadron Facility Project (JHF) of KEK for comprehensive studies on basic science and technology using high-intensity proton accelerator. This paper describes the joint project prepared by the Joint Project Team of JAERI and KEK to construct accelerators and research facilities necessary both for the NSP and the JHF at the site of JAERI Tokai Establishment. (author)

Achievement reports on joint research of solar energy power generation field test project in fiscal 1997. Part 1 of 3; 1997 nendo taiyoko hatsuden field test jigyo kyodo kenkyu seika hokokusho 1/3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

This report is a collection of 101 achievement reports on joint research of solar energy power generation field test project. The contents of the achievement reports are the results and generalization of the joint research with respect to the solar energy power generation field test project. As regards the locations of executing the joint research, the locations by areas and applications are stated. By areas, the joint research was carried out on gymnasiums, parks, recreation centers in the standard areas, universities, sports facilities, public halls, agricultural associations, aged persons' homes, primary, middle and high schools, prefectural office buildings and industrial technology centers in cold districts; prefectural office buildings, agricultural associations, universities, museums, industrial technology centers in good insolation districts; museums, primary, middle and high schools, parks in strong wind and salt polluted districts; and universities and police stations in snowy districts. By applications, the joint research was performed on life cooperative halls, factories, nursery schools, hospitals, clinics, local newspaper companies, indoor warm-water swimming pools, and mushroom fields. (NEDO)

Achievement reports on joint research of solar energy power generation field test project in fiscal 1997. Part 1 of 3; 1997 nendo taiyoko hatsuden field test jigyo kyodo kenkyu seika hokokusho 1/3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

This report is a collection of 101 achievement reports on joint research of solar energy power generation field test project. The contents of the achievement reports are the results and generalization of the joint research with respect to the solar energy power generation field test project. As regards the locations of executing the joint research, the locations by areas and applications are stated. By areas, the joint research was carried out on gymnasiums, parks, recreation centers in the standard areas, universities, sports facilities, public halls, agricultural associations, aged persons' homes, primary, middle and high schools, prefectural office buildings and industrial technology centers in cold districts; prefectural office buildings, agricultural associations, universities, museums, industrial technology centers in good insolation districts; museums, primary, middle and high schools, parks in strong wind and salt polluted districts; and universities and police stations in snowy districts. By applications, the joint research was performed on life cooperative halls, factories, nursery schools, hospitals, clinics, local newspaper companies, indoor warm-water swimming pools, and mushroom fields. (NEDO)

Joint Center for Satellite Data Assimilation Overview and Research Activities

Science.gov (United States)

Auligne, T.

2017-12-01

In 2001 NOAA/NESDIS, NOAA/NWS, NOAA/OAR, and NASA, subsequently joined by the US Navy and Air Force, came together to form the Joint Center for Satellite Data Assimilation (JCSDA) for the common purpose of accelerating the use of satellite data in environmental numerical prediction modeling by developing, using, and anticipating advances in numerical modeling, satellite-based remote sensing, and data assimilation methods. The primary focus was to bring these advances together to improve operational numerical model-based forecasting, under the premise that these partners have common technical and logistical challenges assimilating satellite observations into their modeling enterprises that could be better addressed through cooperative action and/or common solutions. Over the last 15 years, the JCSDA has made and continues to make major contributions to operational assimilation of satellite data. The JCSDA is a multi-agency U.S. government-owned-and-operated organization that was conceived as a venue for the several agencies NOAA, NASA, USAF and USN to collaborate on advancing the development and operational use of satellite observations into numerical model-based environmental analysis and forecasting. The primary mission of the JCSDA is to "accelerate and improve the quantitative use of research and operational satellite data in weather, ocean, climate and environmental analysis and prediction systems." This mission is fulfilled through directed research targeting the following key science objectives: Improved radiative transfer modeling; new instrument assimilation; assimilation of humidity, clouds, and precipitation observations; assimilation of land surface observations; assimilation of ocean surface observations; atmospheric composition; and chemistry and aerosols. The goal of this presentation is to briefly introduce the JCSDA's mission and vision, and to describe recent research activities across various JCSDA partners.

Proceedings of third JAERI-JNC joint conference on nuclear safety research

International Nuclear Information System (INIS)

Anoda, Yoshinari; Oikawa, Tetsukuni; Araya, Fumimasa; Suzuki, Tsugio

2006-03-01

The present report is the proceedings of the third JAERI-JNC joint conference on nuclear safety research held on July 29, 2005 in Tokyo before integration of JAERI and JNC to JAEA. The conference was held for those who are relevant to nuclear industries and regulatory organizations, and general public. The nuclear safety research has been conducted in both institutes according to the Five-Year Program for Nuclear Safety Research established periodically by the Nuclear Safety Commission (NSC) and needs from the regulatory organizations. The objectives of the conference are to present its recent results and to collect views and opinions from the participants for its future program through the discussion after each presentation and panel discussion on how to conduct efficiently the nuclear safety research in the new organization. A total of 234 people participated in the conference mainly from the nuclear industries and regulatory organizations. The conference consisted of presentations on the safety research results, a special lecture and a panel discussion. First, the overview of safety research results was presented from each institute. Then, the results in the field of nuclear installations, environmental radioactivity and radioactive waste were presented from each institute. Then, Dr. Suzuki, deputy chairperson of NSC, made a special lecture on recent trends in nuclear safety regulation and expectation for the new organization. Finally, a panel discussion was conducted with the title of 'how to conduct efficiently the nuclear safety research in the new organization' chaired by Prof. Kimura, the chairperson of Standing Committee on Nuclear Safety Research under the NSC. The panelists from JAERI and JNC presented and discussed the subject together with the participants on the floor. Through vigorous exchange of views in the panel discussion and descriptions on the questionnaires, it was obviously expressed that expectation to the safety research of the new

Body position reproducibility and joint alignment stability criticality on a muscular strength research device

Science.gov (United States)

Nunez, F.; Romero, A.; Clua, J.; Mas, J.; Tomas, A.; Catalan, A.; Castellsaguer, J.

2005-08-01

MARES (Muscle Atrophy Research and Exercise System) is a computerized ergometer for neuromuscular research to be flown and installed onboard the International Space Station in 2007. Validity of data acquired depends on controlling and reducing all significant error sources. One of them is the misalignment of the joint rotation axis with respect to the motor axis.The error induced on the measurements is proportional to the misalignment between both axis. Therefore, the restraint system's performance is critical [1]. MARES HRS (Human Restraint System) assures alignment within an acceptable range while performing the exercise (results: elbow movement:13.94mm+/-5.45, Knee movement: 22.36mm+/- 6.06 ) and reproducibility of human positioning (results: elbow movement: 2.82mm+/-1.56, Knee movement 7.45mm+/-4.8 ). These results allow limiting measurement errors induced by misalignment.

An analysis of a joint shear model for jointed media with orthogonal joint sets

International Nuclear Information System (INIS)

Koteras, J.R.

1991-10-01

This report describes a joint shear model used in conjunction with a computational model for jointed media with orthogonal joint sets. The joint shear model allows nonlinear behavior for both joint sets. Because nonlinear behavior is allowed for both joint sets, a great many cases must be considered to fully describe the joint shear behavior of the jointed medium. An extensive set of equations is required to describe the joint shear stress and slip displacements that can occur for all the various cases. This report examines possible methods for simplifying this set of equations so that the model can be implemented efficiently form a computational standpoint. The shear model must be examined carefully to obtain a computationally efficient implementation that does not lead to numerical problems. The application to fractures in rock is discussed. 5 refs., 4 figs

Gait analysis and weight bearing in pre-clinical joint pain research.

Science.gov (United States)

Ängeby Möller, Kristina; Svärd, Heta; Suominen, Anni; Immonen, Jarmo; Holappa, Johanna; Stenfors, Carina

2018-04-15

There is a need for better joint pain treatment, but development of new medication has not been successful. Pre-clinical models with readouts that better reflect the clinical situation are needed. In patients with joint pain, pain at rest and pain at walking are two major complaints. We describe a new way of calculating results from gait analysis using the CatWalk™ setup. Rats with monoarthritis induced by injection of Complete Freund's Adjuvant (CFA) intra-articularly into the ankle joint of one hind limb were used to assess gait and dynamic weight bearing. The results show that dynamic weight bearing was markedly reduced for the injected paw. Gait parameters such as amount of normal step sequences, walking speed and duration of step placement were also affected. Treatment with naproxen (an NSAID commonly used for inflammatory pain) attenuated the CFA-induced effects. Pregabalin, which is used for neuropathic pain, had no effect. Reduced dynamic weight bearing during locomotion, assessed and calculated in the way we present here, showed a dose-dependent and lasting normalization after naproxen treatment. In contrast, static weight bearing while standing (Incapacitance tester) showed a significant effect for a limited time only. Mechanical sensitivity (von Frey Optihairs) was completely normalized by naproxen, and the window for testing pharmacological effect disappeared. Objective and reproducible effects, with an endpoint showing face validity compared to pain while walking in patients with joint pain, are achieved by a new way of calculating dynamic weight bearing in monoarthritic rats. Copyright © 2017 Elsevier B.V. All rights reserved.

[Advances on biomechanics and kinematics of sprain of ankle joint].

Science.gov (United States)

Zhao, Yong; Wang, Gang

2015-04-01

Ankle sprains are orthopedic clinical common disease, accounting for joint ligament sprain of the first place. If treatment is not timely or appropriate, the joint pain and instability maybe develop, and even bone arthritis maybe develop. The mechanism of injury of ankle joint, anatomical basis has been fully study at present, and the diagnostic problem is very clear. Along with the development of science and technology, biological modeling and three-dimensional finite element, three-dimensional motion capture system,digital technology study, electromyographic signal study were used for the basic research of sprain of ankle. Biomechanical and kinematic study of ankle sprain has received adequate attention, combined with the mechanism research of ankle sprain,and to explore the the biomechanics and kinematics research progress of the sprain of ankle joint.

Proceedings of JAERI-JNC joint conference on nuclear safety research. March 7, 2003, Tokyo

International Nuclear Information System (INIS)

Sugimoto, Jun; Anoda, Yoshinari; Araya, Fumimasa; Yamaguchi, Toshio

2003-08-01

The JAERI-JNC Joint Conference on Nuclear Safety Research was held on March 7, 2003 in Tokyo with 188 participants, ahead of planned unification of JAERI and JNC in 2005. The objectives of the conference are to present recent results of safety research conducted in both institutes in accordance with the Five-Year Safety Research Plan by the Nuclear Safety Commission (NSC), and to reflect suggestions from the participants for future research program. Prof. Matsubara, Vice Chairperson of NSC, first presented a special lecture entitled 'Expectation on Future Nuclear Safety Research in Japan'. Twelve papers were then presented on the overview of research results and those of individual research activities in the fields of nuclear facilities, radioactive waste and environmental radioactivity. In the final session, a panel discussion was conducted with a title of 'Expectation on Future Nuclear Safety Research' chaired by Prof. Kimura, Chairperson of Special Committee on Nuclear Safety Research under NSC. Through the presentations and discussions, consensus has almost been obtained among participants for several key issues on safety research to be conducted by a unified new organization, such as giving priority to safety research as one of major missions, assurance of independence of safety research with the governmental funds, assurance of transparency of the planning process of safety research, separation and harmonization between safety research and developmental research, importance of maintaining fundamental research and research facilities, promotion of cooperation with relevant organizations considering the needs from industries, and importance of dissemination of research results and personnel training. The present report compiles the summaries of special lecture, papers, questions and comments, panel discussions, and OHPs presented in the conference. (author)

A New Superconducting Wire for Future Accelerators

CERN Multimedia

2006-01-01

The CARE/NED project has developed a new superconducting wire that can achieve very high currents (1400 amps) at high magnetic fields (12 teslas). Cross-section of the CARE/NED wire produced by SMI. As we prepare to enter a new phase of particle physics with the LHC, technological development is a continuous process to ensure the demands of future research are met. The next generation of colliders and upgrades of the present ones will require significantly larger magnetic fields for bending and focusing the particle beams. NED (Next European Dipole) is one of the projects taking on this challenge to push technology beyond the present limit (see: More about NED). The magnets in the LHC rely on niobium titanium (NbTi) as the superconducting material, with a maximum magnetic field of 8 to 10T (tesla). In order to exceed this limitation, a different material together with the corresponding technology needs to be developed. NED is assessing the suitability of niobium tin (Nb3Sn), which has the potential to at le...

Short presentation of the activities of the Joint Research Center, Ispra establishment in the field of material research in reactor safety

Energy Technology Data Exchange (ETDEWEB)

Larsson, H [JRC, Ispra (Italy)

1977-07-01

The Commission of the European Communities (CEC) disposes of a joint Research Center (JRC) composed of four establishments. In the ISPRA establishment, which is the largest of four, the largest project, Reactor Safety, includes the following: reliability analysis; blowdown; sodium thermohydraulics; fuel-coolant interaction and post accident heat removal; dynamic structural loading and response (LMFBR); structural failure prevention. The last is described in this paper. It deals with: code validation program for primary containment response in a LMFBR following core disruptive accident (COVA); dynamic material testing; fracture mechanics; creep fatigue; creep crack growth; creep damage evaluation; non-destructive testing.

2011 Joint Science Education Project: Research Experience in Polar Science

Science.gov (United States)

Wilkening, J.; Ader, V.

2011-12-01

The Joint Science Education Project (JSEP), sponsored by the National Science Foundation, is a two-part program that brings together students and teachers from the United States, Greenland, and Denmark, for a unique cross-cultural, first-hand experience of the realities of polar science field research in Greenland. During JSEP, students experienced research being conducted on and near the Greenland ice sheet by attending researcher presentations, visiting NSF-funded field sites (including Summit and NEEM field stations, both located on the Greenland ice sheet), and designing and conducting research projects in international teams. The results of two of these projects will be highlighted. The atmospheric project investigated the differences in CO2, UVA, UVB, temperature, and albedo in different Arctic microenvironments, while also examining the interaction between the atmosphere and water present in the given environments. It was found that the carbon dioxide levels varied: glacial environments having the lowest levels, with an average concentration of 272.500 ppm, and non-vegetated, terrestrial environments having the highest, with an average concentration of 395.143 ppm. Following up on these results, it is planned to further investigate the interaction of the water and atmosphere, including water's role in the uptake of carbon dioxide. The ecology project investigated the occurrence of unusual large blooms of Nostoc cyanobacteria in Kangerlussuaq area lakes. The water chemistry of the lakes which contained the cyanobacteria and the lakes that did not were compared. The only noticeable difference was of the lakes' acidity, lakes containing the blooms had an average pH value of 8.58, whereas lakes without the blooms had an average pH value of 6.60. Further investigation of these results is needed to determine whether or not this was a cause or effect of the cyanobacteria blooms. As a next step, it is planned to attempt to grow the blooms to monitor their effects on

Summarizing knowledge about ethical considerations when conducting Joint Interviews with close relatives

DEFF Research Database (Denmark)

Voltelen, Barbara; Konradsen, Hanne; Østergaard, Birte

interviewing poses some specific ethical challenges although similarities to other qualitative research methods exist. The main difference occurs on behalf of the relationship. The potential creation of conflicts between participants should be given much consideration because of the possible negative impact...... the researcher not to jeopardize it doing joint interviews. Ethical considerations conducting joint interviews remain largely undescribed in the literature. Our purpose was to illuminate the literature regarding specific ethical challenges conducting joint interviews with interrelated people in order to avoid...... it has on interviewees’ ongoing health status. This obligates the researcher to balance delicately between the needs of the interviewees, before, under and after the joint interview....

Joint Degree Program: the Perspective of Employers

Directory of Open Access Journals (Sweden)

Tatjana Bilevičienė

2013-08-01

Full Text Available Purpose — the purpose of this article is to extend discussion towards the need and importance of joint degree programs in modern universities, introducing the perspective of the employers toward this question. Design/methodology/approach — the research was conducted to analyze the demand of joint degree programs from the perspective of employers, identify weak and strong aspects, opinion and demand for graduates of such programs. To achieve this purpose, a combination of theoretical and empirical methods was chosen: document analysis (previous studies, statistics was conducted and an online qualitative survey was organized. Findings — The analysis of articles, studies and statistics points out the challenges and threats faced by universities nowadays, forcing higher education institutions to find new ways to raise the quality of studies and raise the interest of employers to choose graduates from MRU, as well as the satisfaction of employers with their choice of employees. Theoretical analysis pointed out these challenges and requirements for the modern employee, summarised the challenges in preparation of IT field specialists. The conducted research results showed that the diploma of joint degree programs would not be treated as an advantage of possible employee from the perspective of employers in case some important aspects will not be taken into consideration by program creators. On the other hand, undeniably there are strong sides, such as knowledge in the fields of foreign language, international experience, innovativeness and creativeness of employees that would be treated as an advantage in the process of selection for positions of any technical support related positions. Research limitations/implications — employers, whose business activities are closely related to information technology, have been invited as experts. In addition, these experts have a good understanding of the specifics of joint degree programs. The received

MR diagnosis of temporomandibular joint. A study of joint effusion

International Nuclear Information System (INIS)

Kaneda, Takashi; Yamashiro, Mitsuaki; Ozawa, Kaoru; Suzuki, Hiromi; Okada, Hiroyuki; Yamamoto, Hirotsugu

1998-01-01

The purposes of this study were to evaluate the relationship between correlation of MR joint effusion of the temporomandibular joint and disk position, to evaluate the relationship between joint effusion and aging, and to assess the frequency of MR joint effusion of bilateral temporomandibular joints. The temporomandibular joints of 192 patients with clinical symptoms of temporomandibular joint disorders were imaged bilaterally using high field, surface-coil MR imaging. Oblique sagittal and coronal proton density-weighted and T2-weighted images were obtained. Imaging findings of joint effusion were correlated with disk position, aging, and bilateral temporomandibular joints. MR showed effusion in 4% of the joints with normal superior disk position, 36% of the joints with disk displacement with reduction, and 45% of the joints with disk displacement without reduction. There were significant differences in the incidence of joint effusion between normal disk position and anterior disk displacement with or without reduction. Younger patients less than 40 years were significant higher the incidence of joint effusion than those of older patients. A significant association was seen between joint effusion and aging. MR showed effusion in 17% of the unilateral temporomandibular joint, 24% of the bilateral temporomandibular joints. There was no significant difference between unilateral and bilateral case. These results indicated that joint effusion using MR imaging was associated with varied temporomandibular joint pathologic states. (author)

Belgium and France join forces in measuring instrument research. SCK-CEN and CEA are jointly developing an innovative type of gamma detector

International Nuclear Information System (INIS)

Vermeeren, L.

2011-01-01

Real-time monitoring is extremely important to accurately interpret irradiation experiments in research reactors. SCK-CEN has years of expertise in developing sensors to monitor neutron flux, temperature, gamma radiation, etc. It has been collaborating with the CEA since 2006. Both partners share research and research results in the Laboratoire Commun de Instrumentation. Recently, a joint patent application was made for a new type of sensor to measure gamma rays.

HIP JOINT AND HIP ENDOPROSTHESIS BIOMECHANICS

OpenAIRE

Jakub Gryka

2017-01-01

This article contains a description of the basic issues related to anatomy, loading of hip joint and its endoprosthesis research methods. The methods of testing and simulating hip joint loads, factors that influence the selection of parameters during the design of prostheses, typical solutions to engineering problems related to this topic are presented. The article concludes with short summary of the finite element method for the design of hip replacements.

Research on fatigue behavior and residual stress of large-scale cruciform welding joint with groove

International Nuclear Information System (INIS)

Zhao, Xiaohui; Liu, Yu; Liu, Yong; Gao, Yuan

2014-01-01

Highlights: • The fatigue behavior of the large-scale cruciform welding joint with groove was studied. • The longitudinal residual stress of the large-scale cruciform welding joint was tested by contour method. • The fatigue fracture mechanism of the large-scale cruciform welding joint with groove was analyzed. - Abstract: Fatigue fracture behavior of the 30 mm thick Q460C-Z steel cruciform welded joint with groove was investigated. The fatigue test results indicated that fatigue strength of 30 mm thick Q460C-Z steel cruciform welded joint with groove can reach fatigue level of 80 MPa (FAT80). Fatigue crack source of the failure specimen initiated from weld toe. Meanwhile, the microcrack was also found in the fusion zones of the fatigue failure specimen, which was caused by weld quality and weld metal integrity resulting from the multi-pass welds. Two-dimensional map of the longitudinal residual stress of 30 mm thick Q460C-Z steel cruciform welded joint with groove was obtained by using the contour method. The stress nephogram of Two-dimensional map indicated that longitudinal residual stress in the welding center is the largest

Architectural and structural qualities in timber joints

DEFF Research Database (Denmark)

Christensen, Jesper Thøger; Christensen, Mogens Fiil; Damkilde, Lars

2016-01-01

Design of joints in timber structures is crucial to reach both elegant and structural efficient designs. Design of joints should therefore be an integral part of the conceptual design phase. Traditionally this is not the case, and joints are often solely designed and analysed in the engineering...... but also increase timbers competitiveness in the building industry. The paper is part of an ongoing research project aiming at providing tools for an integrated design process for timber structures. The focus of the paper is to identify how structure and its joints contributes to architecture and vice...... design phase. The result is joints that function structurally but do not add value to the design, and may even compromise the architectural ideas. With an approach, integrating both structural and architectural design from the beginning, one should not only gain better structures and architecture...

Research report of fiscal 1997. Basic research on joint implementation for preventing global climate changes; 1998 nendo chosa hokokusho. Kyodo jisshi kiso chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Research was made to promote Activities Implemented Jointly Japan Program. Joint Implementation (JI) is the methodology for preventing global climate changes by collaboration of countries. The countries take cooperative actions for reduction, absorption and fixation of greenhouse gases, and effectively distribute the reduction credits among relevant parties. This was decided in the first session of the Conference of Parties (COP) held in March, 1995. In COP3, Japan`s assigned reduction amount in 2008-2012 was determined as 6% of the emission level in 1990. The protocol defines JI between parties as dealings of emission reduction units, and JI between developing countries as clean development mechanism. The rules for a base line and credit distribution are necessary before full-scale implementation. Although JI is regarded as an important cost-effective project, it is important to decide where and how the JI projects should been promoted. The present state and issues of the primary approved project of Japan Program are arranged. In particular, various terms related to developing countries remain to be solved. 21 figs., 32 tabs.

Summary of Work for Joint Research Interchanges with DARWIN Integrated Product Team 1998

Science.gov (United States)

Hesselink, Lambertus

1999-01-01

The intent of Stanford University's SciVis group is to develop technologies that enabled comparative analysis and visualization techniques for simulated and experimental flow fields. These techniques would then be made available under the Joint Research Interchange for potential injection into the DARWIN Workspace Environment (DWE). In the past, we have focused on techniques that exploited feature based comparisons such as shock and vortex extractions. Our current research effort focuses on finding a quantitative comparison of general vector fields based on topological features. Since the method relies on topological information, grid matching and vector alignment is not needed in the comparison. This is often a problem with many data comparison techniques. In addition, since only topology based information is stored and compared for each field, there is a significant compression of information that enables large databases to be quickly searched. This report will briefly (1) describe current technologies in the area of comparison techniques, (2) will describe the theory of our new method and finally (3) summarize a few of the results.

Geo-engineering, Governance, and Social-Ecological Systems: Critical Issues and Joint Research Needs

Directory of Open Access Journals (Sweden)

Victor Galaz

2012-03-01

Full Text Available The debate about the possibilities to engineer the Earth's climate has changed drastically in the last years. Suggestions of large-scale technological interventions to combat climate change that a decade ago would have been discarded as science fiction are slowly moving into the center of international climate change discussions, research, and politics. In this article, I elaborate three joint key challenges to geo-engineering research from a resilience perspective, with a special emphasis on governance issues. First, I discuss the need to understand geo-engineering proposals from a "planetary boundaries" perspective. Second, I elaborate why the notion of Earth stewardship and geo-engineering are not necessarily in conflict, but instead could be viewed as complementary approaches. Last, I discuss the critical need to explore an institutional setting that is strong enough to weed out geo-engineering proposals that carry considerable ecological risk, but still allow for novelty, fail-safe experimentation, and continuous learning. These issues are critical for our understanding of how to effectively govern global environmental risks, complex systems, and emerging technologies in the Anthropocene.

Fiscal 1999 research cooperation on the development of an advanced multimedia information system. Cooperation on joint research; 1999 nendo senshinteki multimedia joho system no kaihatsu ni kansuru kenkyu kyoryoku. Kyodo kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report covers fiscal 1999 activities under a 5-year program which is a joint effort with China started in fiscal 1998 for the development and verification of a prototype for the above-named system to comprehensively deal with commodity distribution information, education and culture information, agriculture information, disaster/forest fire control information, medical treatment information, and environment monitor/flood watch information. A total of 12 Chinese researchers were invited to this country over the systems for disaster/forest fire control information and environment monitor/flood watch information, when the status in Japan and progress in China of the research were discussed. Joint research in China involved on-site surveys conducted relative to systems for commodity distribution information, education and culture information, medical treatment information, and environment monitor/flood watch information. Endeavors were then exerted, which concerned the survey of candidate locations for distribution centers, acknowledgement of the result of verification tests, training for equipment operation, arrangements for the contents of research, and the establishment of a mutual understanding toward the signing of annexes to the Agreement. (NEDO)

Iranian Joint Registry(Iranian National Hip and Knee Arthroplasty Registry

Directory of Open Access Journals (Sweden)

Hamidreza Aslani

2016-04-01

Full Text Available Periodic evaluation and monitoring the health and economic outcome of joint replacement surgery is a common and popular process under the territory of joint registries in many countries. In this article we introduce the methodology used for the foundation of the National Iranian Joint Registry (IJR with a joint collaboration of the Social Security Organization (SSO and academic research departments considering the requirements of the Iran’s Ministry of Health and Education.

Capabilities of the NASA/IPAC extragalactic database in the era of a global virtual observatory

Science.gov (United States)

Mazzarella, Joseph M.; Madore, Barry F.; Helou, George

2001-11-01

We review the capabilities of the NASA/IPAC Extragalactic Database (NED, http://ned.ipac.caltech.edu) for information retrieval and knowledge discovery in the context of a globally distributed virtual observatory. Since it's inception in 1990, NED has provided astronomers world-wide with the results of a systematic cross-correlation of catalogs covering all wavelengths, along with thousands of extragalactic observations culled from published journal articles. NED is continuously being expanded and revised to include new catalogs and published observations, each undergoing a process of cross-identification to capture the current state of knowledge about extragalactic sources in a panchromatic fashion. In addition to assimilating data from the literature, the team in incrementally folding in millions of observations from new large-scale sky surveys such as 2MASS, NVSS, APM, and SDSS. At the time of writing the system contains over 3.3 million unique objects with 4.2 million cross-identifications. We summarize the recent evolution of NED from its initial emphasis on object name-, position-, and literature-based queries into a research environment that also assists statistical data exploration and discovery using large samples of objects. Newer capabilities enable intelligent Web mining of entries in geographically distributed astronomical archives that are indexed by object names and positions in NED, sample building using constraints on redshifts, object types and other parameters, as well as image and spectral archives for targeted or serendipitous discoveries. A pilot study demonstrates how NED is being used in conjunction with linked survey archives to characterize the properties of galaxy classes to form a training set for machine learning algorithms; an initial goal is production of statistical likelihoods that newly discovered sources belong to known classes, represent statistical outliers, or candidates for fundamentally new types of objects. Challenges and

ECOWindS Joint Action Plan - Guidelines for Implementation

DEFF Research Database (Denmark)

2015-01-01

The Joint Action Plan (JAP) is a deliverable of the European Clusters for Offshore Wind Servicing (ECOWindS) project Work Package 4 (WP4) “Joint Action Plan”. It presents a plan of action or a roadmap for research, development, and innovation (RDI) for the Offshore Wind Service (OWS) industry. Th...

The post-formation management of international joint ventures

DEFF Research Database (Denmark)

Dao, Li

2014-01-01

International joint venture (IJV) is not a new organizational phenomenon in international business. Existing research in IJVs has provided a well-established body of knowledge informing much of the joint venture process from parent firms’ strategic consideration to implementation phase...... a sensemaking approach to IJV post-formation management in search of capturing such ‘soft’, invisible managerial processes in a visible conceptualization that contributes to a better understanding of this complex organizational phenomenon. Empirical insights from cases of Danish – Vietnamese joint ventures...

Are joint audits a proper instrument for increased audit quality?

OpenAIRE

Velte, Patrick; Azibi, Jamel

2015-01-01

Joint audits are recently controversial discussed to increase audit quality and decrease Audit market concentration in Europe, complementing the existing and future rotation rules by the 8th EC directive. First, this article presents a theoretical foundation of joint audits. In this context, the main influences on low balling are presented. The link between joint audits and audit quality is stillcontroversial. Then, the main results of empirical research on joint audit are focused. A clear po...

Basic research on promotion of joint implementation. Research on the overseas trend of activities implemented jointly; Kyodo jisshi suishin kiso chosa jigyo. Kyodo jisshi katsudo ni kakawaru kaigai doko chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The pilot phase of the activities implemented jointly (AIJ) was approved in 1995 in the 1st Conference of the Parties (COPI) of the United Nations Framework Convention on Climate Change to reduce greenhouse gas emission. In order to promote the AIJ Japan program smoothly, some practical examples in every preceding country and the situations and demands of Asian countries were researched. It was confirmed that since larger cost-effectiveness is achieved just in countries lower in emission control cost, AIJ can enhance the cost-effectiveness and promote environmental technology transfer. Japanese government had studied establishment of the framework for AIJ, and decided the basic framework of the AIJ Japan program in 1995. The government also approved the evaluation guidelines of this program which include confirmed and considered matters necessary for government offices related to this program to evaluate and approve each project.

Knee joint vibroarthrographic signal processing and analysis

CERN Document Server

Wu, Yunfeng

2015-01-01

This book presents the cutting-edge technologies of knee joint vibroarthrographic signal analysis for the screening and detection of knee joint injuries. It describes a number of effective computer-aided methods for analysis of the nonlinear and nonstationary biomedical signals generated by complex physiological mechanics. This book also introduces several popular machine learning and pattern recognition algorithms for biomedical signal classifications. The book is well-suited for all researchers looking to better understand knee joint biomechanics and the advanced technology for vibration arthrometry. Dr. Yunfeng Wu is an Associate Professor at the School of Information Science and Technology, Xiamen University, Xiamen, Fujian, China.

Joint research using small tokamaks

International Nuclear Information System (INIS)

Gryaznevich, M.P.; Bosco, E. Del; Malaquias, A.; Mank, G.; Oost, G. van; He, Yexi; Hegazy, H.; Hirose, A.; Hron, M.; Kuteev, B.; Ludwig, G.O.; Nascimento, I.C.; Silva, C.; Vorobyev, G.M.

2005-01-01

Small tokamaks have an important role in fusion research. More than 40 small tokamaks are operational. Research on small tokamaks has created a scientific basis for the scaling-up to larger tokamaks. Well-known scientific and engineering schools, which are now determining the main directions of fusion science and technology, have been established through research on small tokamaks. Combined efforts within a network of small and medium size tokamaks will further enhance the contribution of small tokamaks. A new concept of interactive coordinated research using small tokamaks in the mainstream fusion science areas, in testing of new diagnostics, materials and technologies as well as in education, training and broadening of the geography of fusion research in the scope of the IAEA Coordinated Research Project, is presented

Characteristics of clinical shoulder research over the last decade: a review of shoulder articles in The Journal of Bone & Joint Surgery from 2004 to 2014.

Science.gov (United States)

Gartsman, Gary M; Morris, Brent J; Unger, R Zackary; Laughlin, Mitzi S; Elkousy, Hussein A; Edwards, T Bradley

2015-03-04

The purpose of this study was to determine characteristics and trends in published shoulder research over the last decade in a leading orthopaedic journal. We examined all clinical shoulder articles published in The Journal of Bone & Joint Surgery from 2004 to 2014. The number of citations, authorship, academic degrees of the authors, country and institution of origin, topic, level of evidence, positive or nonpositive outcome, and inclusion of validated patient-reported outcome measures were assessed for each article. Shoulder articles that included an author with an advanced research degree (MD [Doctor of Medicine] with a PhD [Doctor of Philosophy] or other advanced degree) increased during the study period (p = 0.047). Level-I, II, and III studies were more likely to have an author with an advanced research degree, and Level-IV studies were more likely to have MDs only (p = 0.03). Overall, there was great variability of outcome measures, with at least thirty-nine different validated or nonvalidated outcome measures reported. Over the last decade, there was an improvement in the level of evidence of shoulder articles published in The Journal of Bone & Joint Surgery that corresponds with recent emphasis on evidence-based medicine. A consensus is needed in shoulder research for more consistent application of validated patient-reported outcome measurement tools. Copyright © 2015 by The Journal of Bone and Joint Surgery, Incorporated.

Joint research using small tokamaks

International Nuclear Information System (INIS)

Gryaznevich, M.P.; Del Bosco, E.; Malaquias, A.; Mank, G.; Oost, G. van

2005-01-01

Small tokamaks have an important role in fusion research. More than 40 small tokamaks are operational. Research on small tokamaks has created a scientific basis for the scaling-up to larger tokamaks. Well-known scientific and engineering schools, which are now determining the main directions of fusion science and technology, have been established through research on small tokamaks. Combined efforts within a network of small and medium size tokamaks will further enhance the contribution of small tokamaks. A new concept of interactive co-ordinated research using small tokamaks in the mainstream fusion science areas, in testing of new diagnostics, materials and technologies as well as in education, training and broadening of the geography of fusion research in the scope of the IAEA Co-ordinated Research Project is presented. (author)

A coupled mechanical-hydrological methodology for modeling flow in jointed rock masses using laboratory data for the joint flow model

International Nuclear Information System (INIS)

Voss, C.F.; Bastian, R.J.; Shotwell, L.R.

1986-01-01

Pacific Northwest Laboratory (PNL) currently supports the U.S. Department of Energy's Office of Civilian Radioactive Waste Management in developing and evaluating analytical methods for assessing the suitability of sites for geologic disposal of high-level radioactive waste. The research includes consideration of hydrological, geomechanical, geochemical, and waste package components and the evaluation of the degree of coupling that can occur between two or more of these components. The PNL effort and those of other research groups investing potential waste sites in the U.S. and abroad are producing a suite of computer codes to analyze the long-term performance of the proposed repository sites. This paper summarizes the ongoing research in rock mechanics at PNL involving flow through jointed rock. The objective of this research is to develop a methodology for modeling the coupled mechanical-hydrological process of flow through joints and then attempt to validate a ''simple'' model using small-scale laboratory test data as a basis for judging whether the approach has merit. This paper discusses the laboratory tests being conducted to develop a joint behavioral constitutive model for the numerical method under development and the modeling approach being considered

Learning Disabilities: Implications for Policy regarding Research and Practice--A Report by the National Joint Committee on Learning Disabilities, March 2011

Science.gov (United States)

Learning Disabilities: A Multidisciplinary Journal, 2012

2012-01-01

The National Joint Committee on Learning Disabilities (NJCLD) affirms that the construct of learning disabilities represents a valid, unique, and heterogeneous group of disorders, and that recognition of this construct is essential for sound policy and practice. An extensive body of scientific research on learning disabilities continues to support…

Our actions in my mind: Motor imagery of joint action

DEFF Research Database (Denmark)

Vesper, Cordula; Knoblich, Günther; Sebanz, Natalie

2014-01-01

How do people imagine performing actions together? The present study investigated motor imagery of joint actions that requires integrating one's own and another's part of an action. In two experiments, individual participants imagined jumping alone or jointly next to an imagined partner. The joint...... condition required coordinating one's own imagined actions with an imagined partner's actions to synchronize landing times. We investigated whether the timing of participants' own imagined jumps would reflect the difference in jump distance to their imagined partner's jumps. The results showed...... of joint jumping. These findings link research on motor imagery and joint action, demonstrating that individuals are able to integrate simulations of different parts of a joint action....

Joint Attention, Social-Cognition, and Recognition Memory in Adults

OpenAIRE

Kim, Kwanguk; Mundy, Peter

2012-01-01

The early emerging capacity for Joint Attention, or socially coordinated visual attention, is thought to be integral to the development of social-cognition in childhood. Recent studies have also begun to suggest that joint attention affects adult cognition as well, but methodological limitations hamper research on this topic. To address this issue we developed a novel virtual reality (VR) paradigm that integrates eye-tracking and virtual avatar technology to measure two types of joint attenti...

Degenerative Joint Diseases and Neuroinflammation.

Science.gov (United States)

Fusco, Mariella; Skaper, Stephen D; Coaccioli, Stefano; Varrassi, Giustino; Paladini, Antonella

2017-04-01

Rheumatic and joint diseases, as exemplified by osteoarthritis and rheumatoid arthritis, are among the most widespread painful and disabling pathologies across the globe. Given the continuing rise in life expectancy, their prevalence is destined to grow. Osteoarthritis, a degenerative joint disease, is, in particular, on its way to becoming the fourth leading cause of disability worldwide by 2020, with the rising incidence of obesity in addition to age being important factors. It is estimated that 25% of osteoarthritic individuals are unable to perform daily activities. Accompanying osteoarthritis is rheumatoid arthritis, which is a chronic systemic disease that often causes pain and deformity. At least 50% of those affected are unable to remain gainfully employed within 10 years of disease onset. A growing body of evidence now points to inflammation, locally and more systemically, as a promoter of damage to joints and bones, as well as joint-related functional deficits. The pathogenesis underlying joint diseases remains unclear; however, it is currently believed that cross-talk between cartilage and subchondral bone-and loss of balance between these two structures in joint diseases-is a critical element. This view is amplified by the presence of mast cells, whose dysregulation is associated with alterations of junction structures (cartilage, bone, synovia, matrix, nerve endings, and blood vessels). In addition, persistent activation of mast cells facilitates the development of spinal neuroinflammation mediated through their interaction with microglia. Unfortunately, current treatment strategies for rheumatic and articular disease are symptomatic and do little to limit disease progression. Research now should be directed at therapeutic modalities that target osteoarticular structural elements and thereby delaying disease progression and joint replacement. © 2016 World Institute of Pain.

Augmenting a Ballet Dance Show Using the Dancer's Emotion: Conducting Joint Research in Dance and Computer Science

Science.gov (United States)

Clay, Alexis; Delord, Elric; Couture, Nadine; Domenger, Gaël

We describe the joint research that we conduct in gesture-based emotion recognition and virtual augmentation of a stage, bridging together the fields of computer science and dance. After establishing a common ground for dialogue, we could conduct a research process that equally benefits both fields. As computer scientists, dance is a perfect application case. Dancer's artistic creativity orient our research choices. As dancers, computer science provides new tools for creativity, and more importantly a new point of view that forces us to reconsider dance from its fundamentals. In this paper we hence describe our scientific work and its implications on dance. We provide an overview of our system to augment a ballet stage, taking a dancer's emotion into account. To illustrate our work in both fields, we describe three events that mixed dance, emotion recognition and augmented reality.

Electromagnetic Design Study for a Large Bore 15T Superconducting Dipole Magnet

CERN Document Server

Schwerg, N; Devred, Arnaud; Henke, H

2005-01-01

In the framework of research and development (R&D) activities at CERN the Next European Dipole (NED) program is one which is to the development of a high-field dipole magnet using Nb_3Sn superconductors. Part of the NED activities is a design study of different possible dipole configurations which is shared amongst the collaborating institutes. This thesis covers the electromagnetic design study of an 88 mm large bore superconducting 15 T dipole magnet with a coil cross section in cos-theta-layer design. Based on analytically describable geometries the sources of multipole errors are studied and elementary estimations of the magnet are carried out, e.g., the required amount of superconductors or the influence of the iron yoke thickness on the field quality. The magnet cross section for NED is optimized by means of the CERN field computation program ROXIE. The preliminary NED design serves as starting point for the coil cross section optimization with respect to field quality and a radial positioning of th...

Report of researches by joint use of Kyoto University Research Reactor Institute in the second half of the fiscal year 1979

International Nuclear Information System (INIS)

1981-03-01

This is the biannual report of 69 research items by the joint use of the reactor, each item being written in a page. The number of items increased by 14 as compared with that in the first half of the fiscal year of 1979, and became equal to that in the second half of the fiscal year of 1978. According to the rough classification based on the fields, 24 items are related to chemistry, 11 items to physics, 13 items to biology and medicine, 10 items to metallurgy, 6 items to geology and 5 other items. Many items were continued of course from the first half of 1979 and the second half of 1978. (Wakatsuki, Y.)

A Study of Joint Cost Inclusion in Linear Programming Optimization

Directory of Open Access Journals (Sweden)

P. Armaos

2013-08-01

Full Text Available The concept of Structural Optimization has been a topic or research over the past century. Linear Programming Optimization has proved being the most reliable method of structural optimization. Global advances in linear programming optimization have been recently powered by University of Sheffield researchers, to include joint cost, self-weight and buckling considerations. A joint cost inclusion scopes to reduce the number of joints existing in an optimized structural solution, transforming it to a practically viable solution. The topic of the current paper is to investigate the effects of joint cost inclusion, as this is currently implemented in the optimization code. An extended literature review on this subject was conducted prior to familiarization with small scale optimization software. Using IntelliFORM software, a structured series of problems were set and analyzed. The joint cost tests examined benchmark problems and their consequent changes in the member topology, as the design domain was expanding. The findings of the analyses were remarkable and are being commented further on. The distinct topologies of solutions created by optimization processes are also recognized. Finally an alternative strategy of penalizing joints is presented.

Joint enterprise: righting a wrong turn?

OpenAIRE

Jacobson, Jessica; Kirby, Amy; Hunter, Gillian

2016-01-01

This report presents the findings of an exploratory study of joint enterprise, undertaken by the Institute for Criminal Policy Research, in partnership with the Prison Reform Trust, and within funding from the Nuffield Foundation. Joint enterprise is a doctrine of the criminal law which permits multiple defendants to be convicted of the same criminal offence even where they had different types or levels of involvement. It has been the source of great controversy in recent years.\\ud \\ud The st...

Determination of the spatial movement of the temporomandibular joints (tmj joint heads in patients with muscle and joint dysfunction according to computed tomography (ct

Directory of Open Access Journals (Sweden)

Аркадий Максимович Боян

2015-11-01

Full Text Available Computed tomography (CT is the one of most objective diagnostic methods of TMJ MJD it allows define amplitudes of joint heads movement in sagittal projections to detect an asymmetry of TMJ elements location.Aim of research. Assessment of location of mandibular joint heads and determination of its spatial position in patients with TMJ MJD before treatment and after it using CT.Materials and methods. 50 patients 28-62 years old, 37 women and 13 men who underwent computed tomography (CT of TMJ were under observation.The results of observation were analyzed in details.The studies were carried out using cone-radial computed tomographic scanner «Vatech Pax uni 3d». CT of TMJ was carried out in habitual occlusion before the start of treatment and after removal of TMJ MJD symptoms and complaints. At the study there were measured the width of joint fissure in front, upper and back segments according to N.A. Rabuhina methodology in N.E. Androsova and so-authors modification. Statistical analysis of the data received was carried out using «Statistics» (Statsoft, Inc program.Results. The results of TMJ CT in patients before the start of treatment demonstrated that the sizes of TMJ joint fissure were different. The width of the upper segment of TMJ joint fissure in patients before the start of treatment was reliably less (≤0,001 comparing with an analogous parameter in the group of patients after treatment that indicates the upper location of mandibular head in TMJ with reducing the height of the lower segment of face.So the data of study of the joint fissure width received using TMJ CT demonstrate formation of specific outlines of joint fissure at displacement of mandible and consequently joint head. Information about the joint fissure parameters allows rationally plan and realize orthopedic treatment and the necessary rehabilitation measures in patients with TMJ MJD.Conclusions. The studies demonstrated that the displacements of mandibular joint

Handbook on dynamics of jointed structures.

Energy Technology Data Exchange (ETDEWEB)

Ames, Nicoli M.; Lauffer, James P.; Jew, Michael D.; Segalman, Daniel Joseph; Gregory, Danny Lynn; Starr, Michael James; Resor, Brian Ray

2009-07-01

The problem of understanding and modeling the complicated physics underlying the action and response of the interfaces in typical structures under dynamic loading conditions has occupied researchers for many decades. This handbook presents an integrated approach to the goal of dynamic modeling of typical jointed structures, beginning with a mathematical assessment of experimental or simulation data, development of constitutive models to account for load histories to deformation, establishment of kinematic models coupling to the continuum models, and application of finite element analysis leading to dynamic structural simulation. In addition, formulations are discussed to mitigate the very short simulation time steps that appear to be required in numerical simulation for problems such as this. This handbook satisfies the commitment to DOE that Sandia will develop the technical content and write a Joints Handbook. The content will include: (1) Methods for characterizing the nonlinear stiffness and energy dissipation for typical joints used in mechanical systems and components. (2) The methodology will include practical guidance on experiments, and reduced order models that can be used to characterize joint behavior. (3) Examples for typical bolted and screw joints will be provided.

Ethical considerations when conducting joint interviews with close relatives or family

DEFF Research Database (Denmark)

Voltelen, Barbara; Konradsen, Hanne; Østergaard, Birte

2018-01-01

simultaneously in the healthcare setting. AIM: To collect and share knowledge related to ethical considerations conducting joint interviews. DESIGN AND METHODS: A literature review inspired by the integrative review method was performed. Data were retrieved through a structured search in PubMed, CINAHL......; Conduction joint interviews and Reporting on joint interviews Findings: Participants should be offered the best terms for a constructive, on-going relationship after the joint interview has ended. This obligates the researcher to ensure a safe environment during the joint interview and create a delicate...

Differential diagnostics of different nosological forms of the temporomandibular joint pain dysfunction syndrome

Directory of Open Access Journals (Sweden)

Kameneva L.A.

2014-09-01

Full Text Available Research objective: to carry out differential diagnostics of various nosological forms of a temporal and temporomandibular joint pain dysfunction syndrome. Material and methods. On clinical base of orthopedic odontology chair of SamSMU inspection of 244 patients with temporomandibular joint pain dysfunction syndrome was performed. Diagnostics was carried out according to the special card of inspection which was developed on orthopedic odontology chair of SamSMU and included subjective, objective and special methods of research. As a result of research it is taped: 71 — an occlusal-articulation dysfunctional syndrome, 44 — a neuromuscular dysfunctional syndrome, 76 patients have a hardly set dislocation of intra joint disk and 53 — a habitual dislocation and a subluxation of a temporomandibular joint. We used Yu.A. Petrosov's classification as it displays most precisely the processes happening at pathology of the intra joint relations. Conclusion: On the basis of the obtained data the table of differential diagnostics of various nosological forms of temporomandibular joint pain dysfunction syndrome has been made.

Characteristics of joint physical custody families in Flanders

Directory of Open Access Journals (Sweden)

An Katrien Sodermans

2013-04-01

Full Text Available BACKGROUND Research conducted in the 1990s showed that children who live alternately with their mother and father after divorce (joint physical custody have closer relationships with both parents and better emotional outcomes. In 1995 and 2006, joint legal custody and joint physical custody became the default judicial recommendations in Belgium. These defaults served to increase the incidence of joint custody arrangements. However, parents with joint physical custody arrangements who divorced before 2006 may have had higher socio-economic standing and lower conflict relationships than couples that divorced afterwards. Thus earlier research on the impact of joint physical custody arrangements on child outcomes may be too optimistic when considering children of recently divorced parents. OBJECTIVE This study examines the characteristics of four different physical custody arrangements (sole mother, sole father, joint physical, and flexible custody in Flanders, Belgium, and whether these characteristics have changed over time. The legal changes in 1995 and 2006 are used to distinguish three divorce cohorts. METHODS We use data on 2,207 couples that legally divorced between 1971 and 2010 from the Divorce in Flanders project, a large-scale representative multi-actor survey. Multinomial logistic regression models provide estimates of the likelihoods of different physical custody arrangements. RESULTS The incidence of sole mother custody has decreased over the last decades and children increasingly alternate between the households of the mother and the father after divorce. The incidence of sole father custody has remained low. Higher educated parents are more likely to have joint physical custody arrangements than parents from lower social classes. Also, within couples, relative educational levels are important because the higher educated spouse is more likely to have physical custody of the child. We also find that the associations between socio

Determination of Parachute Joint Factors using Seam and Joint Testing

Science.gov (United States)

Mollmann, Catherine

2015-01-01

This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

Temporomandibular joint space in children without joint disease

International Nuclear Information System (INIS)

Larheim, T.A.

1981-01-01

Bilateral assessment of the temporomandibular joint space in children without joint disease is reported. Twenty-eight children were examined with conventional radiography and 23 with tomography. High prevalence of asymmetric joint spaces with both techniques indicated that great care should be taken when using narrowing or widening of the joint space as a diagnostic criterion in children with juvenile rheumatoid arthritis. Other signs, such as restricted translation of the mandibular head, and clinical symptoms should be evaluated. (Auth.)

Main benefits from 30 years of joint projects in nuclear safety

International Nuclear Information System (INIS)

Thadani, Ashok; Teschendorff, Victor; Vitanza, Carlo; Hrehor, Miroslav

2012-01-01

One of the major achievements of the OECD Nuclear Energy Agency (NEA) is the knowledge it has helped to generate through the organisation of joint international research projects. Such projects, primarily in the areas of nuclear safety and radioactive waste management, enable interested countries, on a cost-sharing basis, to pursue research or the sharing of data with respect to particular areas or issues. Over the years, more than 30 joint projects have been conducted with wide participation of member countries. The purpose of this report is to describe the achievements of the OECD/NEA joint projects on nuclear safety research that have been carried out over the past three decades, with a particular focus on thermal-hydraulics, fuel behaviour and severe accidents. It shows that the resolution of specific safety issues in these areas has greatly benefited from the joint projects' activities and results. It also highlights the added value of international co-operation for maintaining unique experimental infrastructure, preserving skills and generating new knowledge

Assessment of Aluminum FSW Joints Using Ultrasonic Testing

Directory of Open Access Journals (Sweden)

Adamus K.

2017-12-01

Full Text Available The paper concerns aluminum joints made using friction stir welding. Although in the aerospace industry there is a tendency to replace metal components with composites, aluminum continues to be a valuable material. Its share in the aircraft structures is the biggest among all structural metals. Lots of aluminum components are made of sheets and most of them require joining. Friction stir welding is a relatively new joining technology, particularly with regard to the sheets having a thickness of 1 mm or lower. The paper is dedicated to non-destructive testing of such joints using ultrasonic inspection. It was found that ultrasonic testing allows for distinguishing between joints without material discontinuities, joint with material discontinuities at the advancing side and joint with discontinuities extending through the whole width of the stir zone. During research only horizontally aligned defects were taken into account.

Computer networks for financial activity management, control and statistics of databases of economic administration at the Joint Institute for Nuclear Research

International Nuclear Information System (INIS)

Tyupikova, T.V.; Samoilov, V.N.

2003-01-01

Modern information technologies urge natural sciences to further development. But it comes together with evaluation of infrastructures, to spotlight favorable conditions for the development of science and financial base in order to prove and protect legally new research. Any scientific development entails accounting and legal protection. In the report, we consider a new direction in software, organization and control of common databases on the example of the electronic document handling, which functions in some departments of the Joint Institute for Nuclear Research

Electronic Health Record for Temporomandibular Joint Disorders – Support in Therapeutic Process

Czech Academy of Sciences Publication Activity Database

Hippmann, R.; Nagy, Miroslav; Dostálová, T.; Zvárová, Jana; Seydlová, M.; Feltlová, E.

2010-01-01

Roč. 6, č. 1 (2010), s. 27-32 ISSN 1801-5603 R&D Projects: GA MŠk(CZ) 1M06014 Institutional research plan: CEZ:AV0Z10300504 Keywords : electronic health record * automatic speech recognition * dental cross * temporomandibular joint * temporomandibular joint disorders * structured data entry * dentistry * data model * text-to-speech system * Research Diagnostic Criteria for TMD Subject RIV: IN - Informatics, Computer Science http://www.ejbi.org/en/ejbi/article/25-en- electronic - health - record -for-temporomandibular-joint-disorders-support-in-therapeutic-process.html

Influence of end-joint methods on magnetization loss in striated helical conductors

International Nuclear Information System (INIS)

Kim, Woo Seok; Kim, Yung Il; Choi, Kyeong Dal; Lee, Ji Kwang

2013-01-01

To reduce the magnetization loss of a coated conductor, the striation and the transposition have to be accomplished for magnetic decoupling. The loss reduction effect in incomplete as well as complete striated YBCO CCs was reported in previous research. At the case of the incomplete striated sample, the end region of the sample is non-striated. So, it is not jointed with each other. In power applications, the joint is needed because current leads must be connected with HTS coils. In this research, the influence of end-joint methods with copper and superconducting joint on magnetization loss in striated YBCO CC and spiral winding samples are presented and compared with non-striated measured result.

Testing of the Structure and Mechanical Properties of Technical Titanium Joints

Directory of Open Access Journals (Sweden)

Bogumił Wronka

2013-01-01

Full Text Available The aim of the research was the titanium pipeline welding technology. The transformations of this material due to the influence of thermal welding were analysed. The basic purpose was to evaluate the properties of titanium joint areas. Pipe joints of various thicknesses were welded by means of TIG argon arc welding while applying the optimum and reduced gas flow intensities. The structure and mechanical properties of these joints were tested. Different test results were obtained for joints welded in these two conditions. Recommendations concerning the welding technology and the heat treatment of joints after welding were presented.

Characteristics of the joint mini-model high temperature superconducting cable

International Nuclear Information System (INIS)

Kim, H.; Sim, K.; Cho, J.; Kim, S.; Kim, J.H.; Jung, H.Y.

2008-01-01

To obtain realistic data on the high temperature superconducting (HTS) power cable, 3-phase 100 m long, 22.9 kV class HTS power transmission cable system have been developed by Korea Electrotechnology Research Institute (KERI) and LS cable Ltd. that is one of 21st Century Frontier Project in Korea. This cable was installed at Go-chang testing site of Korea Electric Power Corporation (KEPCO). For the application of the HTS power cable joint is very important to ensure the performance. Therefore, this paper gives some investigation of AC loss, critical current and joint resistance in jointed HTS tape. We experimentally showed that the influence of joint resistance on AC loss by using several joint methods. Finally, we are measured critical current, AC loss and jointed resistance for the manufactured mini-model cable

Neuromuscular prehabilitation to prevent osteoarthritis after a traumatic joint injury.

Science.gov (United States)

Tenforde, Adam S; Shull, Pete B; Fredericson, Michael

2012-05-01

Post-traumatic osteoarthritis (PTOA) is a process resulting from direct forces applied to a joint that cause injury and degenerative changes. An estimated 12% of all symptomatic osteoarthritis (OA) of the hip, knee, and ankle can be attributed to a post-traumatic cause. Neuromuscular prehabilitation is the process of improving neuromuscular function to prevent development of PTOA after an initial traumatic joint injury. Prehabilitation strategies include restoration of normative movement patterns that have been altered as the result of traumatic injury, along with neuromuscular exercises and gait retraining to prevent the development of OA after an injury occurs. A review of the current literature shows that no studies have been performed to evaluate methods of neuromuscular prehabilitation to prevent PTOA after a joint injury. Instead, current research has focused on management strategies after knee injuries, the value of exercise in the management of OA, and neuromuscular exercises after total knee arthroplasty. Recent work in gait retraining that alters knee joint loading holds promise for preventing the development of PTOA after joint trauma. Future research should evaluate methods of neuromuscular prehabilitation strategies in relationship to the outcome of PTOA after joint injury. Copyright © 2012 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

Marine Transportation System Performance Measures Research

Science.gov (United States)

2016-06-01

the water resource project suitability can be evaluated according to National Economic Development (NED) principles (U.S. Army Corps of Engineers...www.census.gov/ econ /census/about/. U.S. Census Bureau, Foreign Trade Division. 2015. FT920 - U.S. Merchandise Trade: Selected Highlights (annual issues...Updated Principles , Requirements and Guidelines for Water and Land Related Resources Implementation Studies. Washington, DC: The White House. World

75 FR 33613 - Notice of the Carbon Sequestration-Geothermal Energy-Science Joint Workshop

Science.gov (United States)

2010-06-14

... Energy, DOE. ACTION: Notice of the Carbon Sequestration--Geothermal Energy--Science Joint Workshop... Fossil Energy-Carbon Sequestration Program will be holding a joint workshop on Common Research Themes for...-- http://www.geothermal.energy.gov . DATES: The Carbon Sequestration--Geothermal Energy--Science Joint...

Joint Replacement (Finger and Wrist Joints)

Science.gov (United States)

... All Topics A-Z Videos Infographics Symptom Picker Anatomy Bones Joints Muscles Nerves Vessels Tendons About Hand Surgery What is a Hand Surgeon? What is a Hand Therapist? Media Find a Hand Surgeon Home Anatomy Joint Replacement Email to a friend * required fields ...

Joint Operation Planning

National Research Council Canada - National Science Library

2006-01-01

.... It sets forth joint doctrine to govern the joint operation planning activities and performance of the Armed Forces of the United States in joint operations, and provides the joint doctrinal basis...

Jointness for the Rest of Us: Reforming Joint Professional Development

Science.gov (United States)

2016-06-10

transferred to the Joint Staff. 13 DOD’s instinct to “overly centralize planning, organization, and management.”20 The authors contend that this...2. 3 John F. Schank and others, Who is Joint? Reevaluating the Joint Duty Assignment List : A Study Prepared for the Joint Staff, by the RAND...and code those billets as such. Once identified, DOD must expand the Joint Duty Assignment List (JDAL) to include billets that offer enlisted personnel

Periprosthetic joint infection: are patients with multiple prosthetic joints at risk?

Science.gov (United States)

Jafari, S Mehdi; Casper, David S; Restrepo, Camilo; Zmistowski, Benjamin; Parvizi, Javad; Sharkey, Peter F

2012-06-01

Patients who present with a periprosthetic joint infection in a single joint may have multiple prosthetic joints. The risk of these patients developing a subsequent infection in another prosthetic joint is unknown. Our purposes were (1) to identify the risk of developing a subsequent infection in another prosthetic joint and (2) to describe the time span and organism profile to the second prosthetic infection. We retrospectively identified 55 patients with periprosthetic joint infection who had another prosthetic joint in place at the time of presentation. Of the 55 patients, 11 (20%) developed a periprosthetic joint infection in a second joint. The type of organism was the same as the first infection in 4 (36%) of 11 patients. The time to developing a second infection averaged 2.0 years (range, 0-6.9 years). Copyright © 2012 Elsevier Inc. All rights reserved.

APPLICATION PROSPECTS OF THREADED JOINT OF ARMATURE

Directory of Open Access Journals (Sweden)

A. V. Radkevych

2014-06-01

Full Text Available Purpose. One of the main technological operations of buildings construction on the basis of monolithic frame systems is the production of mesh reinforcement. The current interest is the new ways specification of advanced bonding armature techniques without reliability weakness and design of the building in whole, as well as the finding of use prospects of screw-threaded joint of armature as the most technological and economic method of re-bars joints. Methodology. Advantages and disadvantages analysis of existing rebar compound technologies was implemented by couplings of different types and constructions. The most promising vertical constructions for the vertical bars joints in frameworks were determined. Findings. Researches of existing technologies of rebar joints by the couplings of different construction were carried out. The installation method of mesh reinforcement of vertical structural elements with the use of the special catching devices was developed. It allows considerably accelerating installation of mesh reinforcement. Originality. Regularity of labor intensiveness change of mesh reinforcement installation of columns at armature joint in vertical position by threaded couplings with the help of catching devices using special construction was determined. This allows substantially reducing the labor expenditures during installation of these elements. Dependency of labor intensiveness and cost of lap welding armature joints, by tub-seam welding and by thread coupling depending on its diameter was designated. Regularity of labor intensiveness changes of installation at armature joints by different methods taking into account preparatory works was defined. Practical value. The analysis of mechanical armature joints techniques was conducted. It will allow selecting methods of armature joints to increase the speed of construction works more economical and effective.

Coracoclavicular joint

Energy Technology Data Exchange (ETDEWEB)

Kim, Kun Sang; Park, Chan Il; Ahn, Jae Doo; Lim, Chong Won [Seoul National University College of Medicine, Seoul (Korea, Republic of)

1970-10-15

The coracoclvicular joint, a rear abnormality which may be the cause of pain in the shoulder and limitation of motion of the shoulder joint, is discussed. A case of coracoclvicular joint with shoulder pain was observed in 65 yrs old Korean male.

The application of magnetic resonance imaging in temporomandibular joint pathology

International Nuclear Information System (INIS)

Ehmedov, E.T.; Qahramanov, E.T.

2007-01-01

The diseases and damages of temporomandibular joint have compleceted diagnostic unlike other bone-joint pathologies. In 2005 for the first time in history it was implemented the magnetic resonance imaging in diagnostics of patients with with temporomandibular joints pathology. The current researches are in place till today. Being the golden standart the application of magnetic resonance tomography has a great role in differential diagnostics of the chronic arthritis, sclerosanse, deformanse arthrosis and arthrosis with internal derancement. This method guaranteed the correct valuation of the bone, disc and muscle structures of the joint and therefore brought full clearance into the problem

Temporomandibular joint

International Nuclear Information System (INIS)

Westesson, P.L.; Hatala, M.; Tallents, R.H.; Katzberg, R.W.; Musgrave, M.; Levitt, S.

1990-01-01

This paper determines the frequency of MR signs of abnormal temporomandibular joints (TMJs) in asymptomatic volunteers. Forty-two volunteers with 84 clinically normal TMJs were imaged in the sagittal and coronal planes with surface coil MR imaging. Sagittal closed and open and coronal closed views were obtained bilaterally in all volunteers. The images were classified as normal (superior disk position) or abnormal (disk displacement of degenerative joint disease). Eighteen joints in 11 volunteers were abnormal; 12 had disk displacement with reduction and six had disk displacement without reduction, with associated degenerative joint disease in three of the six. Asymptomatic internal derangement and degenerative joint disease occur in about one-fourth of asymptomatic volunteers

The Enhancement of Composite Scarf Joint Interface Strength Through Carbon Nanotube Reinforcement

National Research Council Canada - National Science Library

Slaff, Randolph E

2007-01-01

The objective of this research is to investigate the potentially significant improvement to scarf joint bonding achieved through the dispersion of carbon nanotubes along the interface of the composite joint...

A novel hybrid joining methodology for composite to steel joints

Science.gov (United States)

Sarh, Bastian

This research has established a novel approach for designing, analyzing, and fabricating load bearing structural connections between resin infused composite materials and components made of steel or other metals or alloys. A design philosophy is proposed wherein overlapping joint sections comprised of fiber reinforced plastics (FRP's) and steel members are connected via a combination of adhesive bonding and integrally placed composite pins. A film adhesive is utilized, placed into the dry stack prior to resin infusion and is cured after infusion through either local heat elements or by placing the structure into an oven. The novel manner in which the composite pins are introduced consists of perforating the steel member with holes and placing pre-formed composite pins through them, also prior to resin infusion of the composite section. In this manner joints are co-molded structures such that secondary processing is eliminated. It is shown that such joints blend the structural benefits of adhesive and mechanically connected joints, and that the fabrication process is feasible for low-cost, large-scale production as applicable to the shipbuilding industry. Analysis procedures used for designing such joints are presented consisting of an adhesive joint design theory and a pin placement theory. These analysis tools are used in the design of specimens, specific designs are fabricated, and these evaluated through structural tests. Structural tests include quasi-static loading and low cycle fatigue evaluation. This research has thereby invented a novel philosophy on joints, created the manufacturing technique for fabricating such joints, established simple to apply analysis procedures used in the design of such joints (consisting of both an adhesive and a pin placement analysis), and has validated the methodology through specimen fabrication and testing.

Establishing a Research and Evaluation Capability for the Joint Medical Education and Training Campus

OpenAIRE

Kirby, Sheila Nataraj; Marsh, Julie A.; Thie, Harry J.

2011-01-01

In calling for the transformation of military medical education and training, the 2005 Base Realignment and Closure Commission recommended relocating basic and specialty enlisted medical training to a single site to take advantage of economies of scale and the opportunity for joint training. As a result, a joint medical education and training campus (METC) has been established at Fort Sam Houston, Texas. Two of METC's primary long-term goals are to become a high-performing learning organizati...

76 FR 31305 - Pacific Whiting; Advisory Panel and Joint Management Committee

Science.gov (United States)

2011-05-31

... experienced in the harvesting, processing, marketing, management, conservation, or research of the offshore... Whiting; Advisory Panel and Joint Management Committee AGENCY: National Oceanic and Atmospheric.... SUMMARY: NMFS solicits nominations for the Advisory Panel (AP) and the Joint Management Committee (JMC) on...

Joint resistance measurements of pancake and terminal joints for JT-60SA EF coils

Energy Technology Data Exchange (ETDEWEB)

Obana, Tetsuhiro, E-mail: obana.tetsuhiro@LHD.nifs.ac.jp [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Takahata, Kazuya; Hamaguchi, Shinji; Mito, Toshiyuki; Imagawa, Shinsaku [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Kizu, Kaname; Murakami, Haruyuki; Yoshida, Kiyoshi [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2013-11-15

Highlights: • To evaluate the joint fabrication technology for the JT-60SA EF coils, joint resistance measurements were conducted with a joint sample. • The joint sample was composed of pancake and terminal joints. • The measurements demonstrated that both joints fulfilled the design requirement. • Considering the measurements, the characteristics of both joints were investigated using an analytical model that represents the joints. -- Abstract: To evaluate the joint fabrication technology for the JT-60SA EF coils, joint resistance measurements were conducted using a sample consisting of pancake and terminal joints. Both joints are shake-hands lap joints composed of cable-in-conduit conductors and a pure copper saddle-shaped spacer. The measurements demonstrated that both joints fulfilled the design requirement. Considering these measurements, the characteristics of both joints were investigated using analytical models that represent the joints. The analyses indicated that the characteristics of the conductors used in the joints affect the characteristics of the joints.

Joint instability and osteoarthritis.

Science.gov (United States)

Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

2015-01-01

Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA.

Joint Instability and Osteoarthritis

Directory of Open Access Journals (Sweden)

Darryl Blalock

2015-01-01

Full Text Available Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA. Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA.

Description and Methods of the Automated Document Management System Usage in Scientific Organizational Activities of the Joint Institute for Nuclear Research (ADS SOA JINR)

CERN Document Server

Borisovsky, V F; Kekelidze, M G; Nikonov, E G; Senchenko, V A

2005-01-01

This paper presents the structure description and user guide for Information program system for automation of a document flow for support of scientific arrangement planning (ADS SOA) which can be used for planning and carrying out seminars, workshops, conferences and other arrangements of research management. This work is intended for automation of scientific research management in the Joint Institute for Nuclear Research. The complex of programs represents the CDS Agenda system used in the European Organization for Nuclear Research (CERN), which is adapted to the conditions of JINR.

International joint ventures

DEFF Research Database (Denmark)

Sørensen, Karsten Engsig

2001-01-01

The article analysis problems connected with corporate joint ventures. Among others the possible conflicts between the joint venture agreement and the statutes of the companies is examined, as well as certain problems connected to the fact that the joint venture partners have created commen control...... over their joint company....

Magnetic resonance imaging of peripheral joints in rheumatic diseases

DEFF Research Database (Denmark)

Østergaard, Mikkel; Duer, Anne; Møller, Uffe

2004-01-01

The need for better methods than the conventional clinical, biochemical and radiographical examinations in the management of inflammatory joint diseases is evident, since these methods are not sensitive or specific to early pathologies and subtle changes. Magnetic resonance imaging (MRI) offers...... improved sensitivity to early inflammatory and destructive changes in peripheral joints in rheumatoid arthritis (RA) and, even though less well documented, in other inflammatory joint diseases. Good evidence is available that MRI bone erosions represent true bone abnormalities and are predictors......, this chapter discusses the potential for the use of MRI in the clinical management of patients with suspected and diagnosed inflammatory joint diseases, as well as research priorities and clinical situations where the use of MRI could be suggested...

Joint Chiefs of Staff > About > The Joint Staff > Senior Enlisted Advisor

Science.gov (United States)

Skip to main content (Press Enter). Toggle navigation Joint Chiefs of Staff Joint Chiefs of Staff Joint Chiefs of Staff Facebook Twitter YouTube Flickr Blog Instagram Search JCS: Search Search Search JCS: Search Home Media News Photos Videos Publications About The Joint Staff Chairman Vice Chairman

A joint-constraint model for human joints using signed distance-fields

DEFF Research Database (Denmark)

Engell-Nørregård, Morten Pol; Abel, Sarah Maria Niebe; Erleben, Kenny

2012-01-01

We present a local joint-constraint model for a single joint which is based on distance fields. Our model is fast, general, and well suited for modeling human joints. In this work, we take a geometric approach and model the geometry of the boundary of the feasible region, i.e., the boundary of all...... allowed poses. A region of feasible poses can be built by embedding motion captured data points in a signed distance field. The only assumption is that the feasible poses form a single connected set of angular values. We show how signed distance fields can be used to generate fast and general joint......-joint dependencies, or joints with more than three degrees of freedom. The resolution of the joint-constraints can be tweaked individually for each degree of freedom, which can be used to optimize memory usage. We perform a comparative study of the key-properties of various joint-constraint models, as well...

Study on the corrosion assessment of overpack welds-III (Joint research)

International Nuclear Information System (INIS)

Mitsui, Hiroyuki; Takahashi, Rieko; Otsuki, Akiyoshi; Asano, Hidekazu; Taniguchi, Naoki; Yui, Mikazu

2006-12-01

There is some possibility that the corrosion resistance of overpack welds is different from that of base metal due to the differences of material properties. In this study, corrosion behavior of welded joint for carbon steel was compared with base metal using the specimens taken from welded joint model fabricated by TIG, MAG and EBW respectively. The corrosion tests were performed for following four items. Passivation behavior and corrosion type. Propagation of general corrosion, pitting corrosion and crevice corrosion under aerobic condition. Stress corrosion cracking susceptibility. Propagation of general corrosion and hydrogen embrittlement under anaerobic condition. The results of these corrosion tests indicated that the corrosion resistance of welded metal by TIG and MAG was inferior to base metal for general corrosion, pitting corrosion and crevice corrosion. It was implied that the filler materials used for welding affected the corrosion resistance. No deterioration of corrosion resistance was observed in any corrosion modes for EBW, which does not need filler material. The susceptibility to stress corrosion cracking of welded metal and heat affected zone was lower than that of base metal. (author)

Estimation of Joint types and Joint Limits from Motion capture data

DEFF Research Database (Denmark)

Engell-Nørregård, Morten Pol; Erleben, Kenny

2009-01-01

It is time-consuming for an animator to explicitly model joint types and joint limits of articulated figures. In this paper we describe a simple and fast approach to automated joint estimation from motion capture data of articulated figures. Our method will make the joint modeling more efficient ...

PELAKSANAAN ITIKAD BAIK MEMORY OF UNDERSTANDINGDALAM PERJANJIAN JOINT VENTUREPERUSAHAAN MODAL ASING

Directory of Open Access Journals (Sweden)

Heru Guntoro

2014-11-01

Full Text Available This paper examines the perspective of law in implementation good conviction memory of understanding in joint venture agreement and the result from law implementation memory of understanding in join venture agreement in the supreme court decision. This research is a literary research, the legal matters are analyzed qualitatively using normatif and juridical approach. From research can concludes, implementation from good conviction Memory of Understanding in the joint venture agreement are command of regulation with there are measure and explisit sanction to they who break a promise. Tulisan ini bertujuan untuk mengkaji perspektif hukum perdata terhadap pelaksanaan itikad baik dan akibat hukum pelaksanaan Memory of Understandingdalam perjanjian joint venturePerusahaan Modal Asing dalam Putusan Mahkamah Agung. Penelitian yang dilakukan adalah penelitian kepustakaan, bahanbahan hukum yang dianalisis secara kualitatif dengan pendekatan yuridis normatif dan komparatif. Dari penelitian yang dilakukan dapat disimpulkan bahwa: pelaksanaan itikad baik Memory of Understandingdalam perjanjian joint venturePerusahaan Modal Asing merupakan perintah Undang-Undang serta ada tindakan dan sanksi tegas bagi mereka yang telah melakukan wanprestasi (beritikad tidak baik.

Welding of metallic fuel elements for the irradiation test in JOYO. Preliminary tests and welding execution tests (Joint research)

International Nuclear Information System (INIS)

Kikuchi, Hironobu; Nakamura, Kinya; Iwai, Takashi; Arai, Yasuo

2009-10-01

Irradiation tests of metallic fuels elements in fast test reactor JOYO are planned under the joint research of Japan Atomic Energy Agency (JAEA) and Central Research Institute of Electric Power Industry (CRIEPI). Six U-Pu-Zr fuel elements clad with ferritic martensitic steel are fabricated in Plutonium Fuel Research Facility (PFRF) of JAEA-Oarai for the first time in Japan. In PFRF, the procedures of fabrication of the fuel elements were determined and the test runs of the equipments were carried out before the welding execution tests for the fuel elements. Test samples for confirming the welding condition between the cladding tube and top and bottom endplugs were prepared, and various test runs were carried out before the welding execution tests. As a result, the welding conditions were finalized by passing the welding execution tests. (author)

United States -- Mexican joint ventures: A case history approach

Energy Technology Data Exchange (ETDEWEB)

Moore, N.L.; Chidester, R.J.; Hughes, K.R.; Fowler, R.A.

1993-03-01

Because the Mexican government has encouraged investment in Mexico by increasing the percentage of ownership of a Mexican business that a US company can hold, joint ventures are more attractive now than they had been in the past. This study provides preliminary information for US renewable energy companies who are interested in forming a joint venture with a Mexican company. This report is not intended to be a complete reference but does identifies a number of important factors that should be observed when forming a Mexican joint venture: (1)Successful joint ventures achieve the goals of each partner. (2)It is essential that all parties agree to the allocation of responsibilities. (3)Put everything in writing. (4)Research in depth the country or countries in which you are considering doing business.

Proceedings of 2012 JAEA/KAERI joint seminar on advanced irradiation and PIE technologies

International Nuclear Information System (INIS)

Ishihara, Masahiro; Ishitsuka, Etsuo; Suzuki, Masahide

2012-12-01

Under the 'Arrangement for Corporation in the field of peaceful uses of Nuclear Energy between the Japan Atomic Energy Agency (JAEA) and the Korean Atomic Energy Research Institute (KAERI)', the 2012 JAEA/KAERI Joint Seminar on Advanced Irradiation and PIE (post-irradiation examination) Technologies has been held at Mito, Japan from March 28 to 30, 2012. This triennial seminar is the seventh in series of bilateral exchange of irradiation and PIE technologies and research reactor management. Since the first joint seminar on the PIE Technology between JAERI (Japan Atomic Energy Research Institute, former agency of JAEA) and KAERI was held at JAERI Oarai Research Institute, Japan in 1992, the international cooperation program between JAEA and KAERI has been actively carried out in the field of neutron irradiation. At the fifth seminar in 2005 and sixth in 2008, the irradiation technology and the research reactor management fields were included, respectively, to the joint seminar, and it covers whole areas of irradiation using research reactors. In this seminar total 37 presentations were made in three technical sessions, which are 'research reactor management', 'advanced irradiation technology' and 'post-irradiation examination technology', and active information exchange was done among participants. Papers or manuscripts presented in the 2012 JAEA/KAERI Joint Seminar on Advanced Irradiation and PIE Technologies are contained in the proceedings. (author)

Durability of building joint sealants

Science.gov (United States)

Christopher C. White; Kar Tean Tan; Donald L. Hunston; R. Sam Williams

2009-01-01

Predicting the service life of building joint sealants exposed to service environments in less than real time has been a need of the sealant community for many decades. Despite extensive research efforts to design laboratory accelerated tests to duplicate the failure modes occurring in field exposures, little success has been achieved using conventional durability...

Joint Assessment of Renewable Energy and Water Desalination Research Center (REWDC) Program Capabilities and Facilities In Radioactive Waste Management

International Nuclear Information System (INIS)

Bissani, M; Fischer, R; Kidd, S; Merrigan, J

2006-01-01

The primary goal of this visit was to perform a joint assessment of the Renewable Energy and Water Desalination Center's (REWDC) program in radioactive waste management. The visit represented the fourth technical and scientific interaction with Libya under the DOE/NNSA Sister Laboratory Arrangement. Specific topics addressed during the visit focused on Action Sheet P-05-5, ''Radioactive Waste Management''. The Team, comprised of Mo Bissani (Team Lead), Robert Fischer, Scott Kidd, and Jim Merrigan, consulted with REWDC management and staff. The team collected information, discussed particulars of the technical collaboration and toured the Tajura facility. The tour included the waste treatment facility, waste storage/disposal facility, research reactor facility, hot cells and analytical labs. The assessment team conducted the first phase of Task A for Action Sheet 5, which involved a joint assessment of the Radioactive Waste Management Program. The assessment included review of the facilities dedicated to the management of radioactive waste at the Tourja site, the waste management practices, proposed projects for the facility and potential impacts on waste generation and management

Reliability of Tubular Joints

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Thoft-Christensen, Palle

In this paper the preliminary results obtained by tests on tubular joints are presented. The joints are T-joints and the loading is static. It is the intention in continuation of these tests to perform tests on other types of joints (e.g. Y-joints) and also with dynamic loading. The purpose...... of the test is partly to obtain empirical data for the ultimate load-carrying capacity of tubular T-joints and partly to obtain some experience in performing tests with tubular joints. It is well known that tubular joints are usually designed in offshore engineering on the basis of empirical formulas obtained...... by experimental test results. Therefore, there is a need for performing experimental tests in this area....

The ENCCA-WP7/EuroSarc/EEC/PROVABES/EURAMOS 3rd European Bone Sarcoma Networking Meeting/Joint Workshop of EU Bone Sarcoma Translational Research Networks; Vienna, Austria, September 24-25, 2015. Workshop Report

NARCIS (Netherlands)

Kager, L.; Whelan, J.; Dirksen, U.; Hassan, B.; Anninga, J.; Bennister, L.; Bovee, J.V.; Brennan, B.; Broto, J.M.; Brugieres, L.; Cleton-Jansen, A.M.; Copland, C.; Dutour, A.; Fagioli, F.; Ferrari, S.; Fiocco, M.; Fleuren, E.D.; Gaspar, N.; Gelderblom, H.; Gerrand, C.; Gerss, J.; Gonzato, O.; Graaf, W.T. van der; Hecker-Nolting, S.; Herrero-Martin, D.; Klco-Brosius, S.; Kovar, H.; Ladenstein, R.; Lancia, C.; Ledeley, M.C.; McCabe, M.G.; Metzler, M.; Myklebost, O.; Nathrath, M.; Picci, P.; Potratz, J.; Redini, F.; Richter, G.H.; Reinke, D.; Rutkowski, P.; Scotlandi, K.; Strauss, S.; Thomas, D; Tirado, O.M.; Tirode, F.; Vassal, G.; Bielack, S.S.

2016-01-01

This report summarizes the results of the 3rd Joint ENCCA-WP7, EuroSarc, EEC, PROVABES, and EURAMOS European Bone Sarcoma Network Meeting, which was held at the Children's Cancer Research Institute in Vienna, Austria on September 24-25, 2015. The joint bone sarcoma network meetings bring together

Error Characterization of Flight Trajectories Reconstructed Using Structure from Motion

Science.gov (United States)

2015-03-27

DCM . . . 41 K Model to World Scale Factor . . . . . . . . . . . . . . . . 41 ( CaNED ) N NED to Aircraft Frame DCM for Nth camera . . . . . . . 44 (Cca...developed in a way that is useful for and falls within the limitations of a system designed for aerial navigation. Additionally, this chapter will describe...opposed to Equation 3.4 which gave the VSFM estimate. CcENU = (C c a) N( CaNED ) NCNEDENU (3.9) where Ca1NED from Equation 3.4 is replaced by (C a NED) N

Equivalent 5 year bNED in select prostate cancer patients managed with surgery or radiation therapy despite exclusion of the seminal vesicles from the clinical target volume

International Nuclear Information System (INIS)

D'Amico, A. V.; Whittington, R.; Kaplan, I.; Beard, C.; Schultz, D.; Malkowicz, S.B.; Tomaszewski, J.E.; Wein, A.; Coleman, C.N.

1997-01-01

Purpose: Prostate Specific Antigen (PSA) failure free survival was determined for select prostate cancer patients treated definitively with external beam radiation therapy to the prostate only or a radical retropubic prostatectomy. Materials and Methods: A logistic regression multivariable analysis evaluating the variables of PSA, biopsy Gleason score, and clinical stage was used to evaluate the endpoint of pathologic seminal vesicle invasion (SVI) in 749 consecutive prostate cancer patients treated with a radical retropubic prostatectomy. In a subgroup of 325 surgically and 197 radiation managed patients who did not have the clinical predictors of SVI, PSA failure free survival (bNED) was determined. Comparisons were made using the log rank test. Radiation managed patients in this subgroup were treated to a median dose of 66 Gray (66 - 70 Gray) in 2 Gray fractions to the prostate only. A 95% normalization was used routinely. Results: The pre-treatment PSA (> 10 ng/ml), biopsy Gleason score (≥ 7), and clinical stage (T 2b,2c,3 versus T 1,2a ) were found to be significant independent predictors (p 1,2a , PSA < 10 ng/ml, and biopsy Gleason ≤ 6 prostate cancer

Magneto-therapy of human joint cartilage.

Science.gov (United States)

Wierzcholski, Krzysztof; Miszczak, Andrzej

2017-01-01

The topic of the present paper concerns the human joint cartilage therapy performed by the magnetic induction field. There is proved the thesis that the applied magnetic field for concrete cartilage illness should depend on the proper relative and concrete values of applied magnetic induction, intensity as well the time of treatment duration. Additionally, very important are frequencies and amplitudes of magnetic field as well as magnetic permeability of the synovial fluid. The research methods used in this paper include: magnetic induction field produced by a new Polish and German magneto electronic devices for the therapy of human joint cartilage diseases, stationary and movable magnetic applicators, magnetic bandage, ferrofluid injections, author's experience gained in Germany research institutes and practical results after measurements and information from patients. The results of this paper concern concrete parameters of time dependent electro-magnetic field administration during the joint cartilage therapy duration and additionally concern the corollaries which are implied from reading values gained on the magnetic induction devices. The main conclusions obtained in this paper are as follows: Time dependent magnetic induction field increases the dynamic viscosity of movable synovial fluid and decreases symptoms of cartilage illness for concrete intensity of magnetic field and concrete field line architecture. The ferrofluid therapy and phospholipids bilayer simultaneously with the administrated external electromagnetic field, increases the dynamic viscosity of movable synovial fluid.

Joint US Geological Survey, US Nuclear Regulatory Commission workshop on research related to low-level radioactive waste disposal, May 4-6, 1993, National Center, Reston, Virginia; Proceedings

Science.gov (United States)

Stevens, Peter R.; Nicholson, Thomas J.

1996-01-01

This report contains papers presented at the "Joint U.S. Geological Survey (USGS) and U.S. Nuclear Regulatory Commission (NRC) Technical Workshop on Research Related to Low-Level Radioactive Waste (LLW) Disposal" that was held at the USGS National Center Auditorium, Reston, Virginia, May 4-6, 1993. The objective of the workshop was to provide a forum for exchange of information, ideas, and technology in the geosciences dealing with LLW disposal. This workshop was the first joint activity under the Memorandum of Understanding between the USGS and NRC's Office of Nuclear Regulatory Research signed in April 1992.Participants included invited speakers from the USGS, NRC technical contractors (U.S. Department of Energy (DOE) National Laboratories and universities) and NRC staff for presentation of research study results related to LLW disposal. Also in attendance were scientists from the DOE, DOE National Laboratories, the U.S. Environmental Protection Agency, State developmental and regulatory agencies involved in LLW disposal facility siting and licensing, Atomic Energy Canada Limited (AECL), private industry, Agricultural Research Service, universities, USGS and NRC.

The impact of joint ventures on U.S. hospitals.

Science.gov (United States)

Harrison, Jeffrey P

2006-01-01

This quantitative research study assesses the organizational characteristics, market factors, and profitability of US hospitals that operate joint ventures with other health care organizations. Data was obtained from the 2001 American Hospital Association annual survey, the Area Resource File, and the Center for Medicare and Medicaid Services Minimum Data Set. These data files provide essential information on individual acute care hospitals, the communities they serve, and the level of financial performance. Descriptive statistics were evaluated and a logistic regression model was utilized to examine hospitals operating joint ventures. The study found hospitals that operate joint ventures are located in communities with more elderly patients, lower unemployment, and lower HMO penetration. From an operating performance perspective, hospitals that operate joint ventures have a higher occupancy rate, a higher average length of stay, more clinical services, lower long-term debt, and a greater number of managed care contracts. The results also appear to indicate that joint ventures have a positive financial impact on US hospitals. The study has managerial implications supporting the use of joint ventures to improve hospital performance and policy implications on resource allocation.

Alterations in knee joint laxity during the menstrual cycle in healthy women leads to increases in joint loads during selected athletic movements.

Science.gov (United States)

Park, Sang-Kyoon; Stefanyshyn, Darren J; Ramage, Barbara; Hart, David A; Ronsky, Janet L

2009-06-01

It has been speculated that the hormonal cycle may be correlated with higher incidence of ACL injury in female athletes, but results have been very contradictory. Knee joint loads are influenced by knee joint laxity (KJL) during the menstrual cycle. Controlled laboratory study. Serum samples and KJL were assessed at the follicular, ovulation, and luteal phases in 26 women. Knee joint mechanics (angle, moment, and impulse) were measured and compared at the same intervals. Each of the 26 subjects had a value for knee laxity at each of the 3 phases of their cycle, and these were ordered and designated low, medium, and high for that subject. Knee joint mechanics were then compared between low, medium, and high laxity. No significant differences in knee joint mechanics were found across the menstrual cycle (no phase effect). However, an increase in KJL was associated with higher knee joint loads during movement (laxity effect). A 1.3-mm increase in KJL resulted in an increase of approximately 30% in adduction impulse in a cutting maneuver, an increase of approximately 20% in knee adduction moment, and a 20% to 45% increase in external rotation loads during a jumping and stopping task (P knee joint loading during movements. Clinical Relevance Our findings will be beneficial for researchers in the development of more effective ACL injury prevention programs.

Changes in balance and joint position sense during a 12-day high altitude trek: The British Services Dhaulagiri medical research expedition.

Directory of Open Access Journals (Sweden)

Sarah B Clarke

Full Text Available Postural control and joint position sense are essential for safely undertaking leisure and professional activities, particularly at high altitude. We tested whether exposure to a 12-day trek with a gradual ascent to high altitude impairs postural control and joint position sense. This was a repeated measures observational study of 12 military service personnel (28±4 years. Postural control (sway velocity measured by a portable force platform during standing balance, a Sharpened Romberg Test and knee joint position sense were measured, in England (113m elevation and at 3 research camps (3619m, 4600m and 5140m on a 12-day high altitude trek in the Dhaulagiri region of Nepal. Pulse oximetry, and Lake Louise scores were also recorded on the morning and evening of each trek day. Data were compared between altitudes and relationships between pulse oximetry, Lake Louise score, and sway velocity were explored. Total sway velocity during standing balance with eyes open (p = 0.003, d = 1.9 and during Sharpened Romberg test with eyes open (p = 0.007, d = 1.6 was significantly greater at altitudes of 3619m and 5140m when compared with sea level. Anterior-posterior sway velocity during standing balance with eyes open was also significantly greater at altitudes of 3619m and 5140m when compared with sea level (p = 0.001, d = 1.9. Knee joint position sense was not altered at higher altitudes. There were no significant correlations between Lake Louise scores, pulse oximetry and postural sway. Despite a gradual ascent profile, exposure to 3619 m was associated with impairments in postural control without impairment in knee joint position sense. Importantly, these impairments did not worsen at higher altitudes of 4600 m or 5140 m. The present findings should be considered during future trekking expeditions when developing training strategies targeted to manage impairments in postural control that occur with increasing altitude.

Changes in balance and joint position sense during a 12-day high altitude trek: The British Services Dhaulagiri medical research expedition.

Science.gov (United States)

Clarke, Sarah B; Deighton, Kevin; Newman, Caroline; Nicholson, Gareth; Gallagher, Liam; Boos, Christopher J; Mellor, Adrian; Woods, David R; O'Hara, John P

2018-01-01

Postural control and joint position sense are essential for safely undertaking leisure and professional activities, particularly at high altitude. We tested whether exposure to a 12-day trek with a gradual ascent to high altitude impairs postural control and joint position sense. This was a repeated measures observational study of 12 military service personnel (28±4 years). Postural control (sway velocity measured by a portable force platform) during standing balance, a Sharpened Romberg Test and knee joint position sense were measured, in England (113m elevation) and at 3 research camps (3619m, 4600m and 5140m) on a 12-day high altitude trek in the Dhaulagiri region of Nepal. Pulse oximetry, and Lake Louise scores were also recorded on the morning and evening of each trek day. Data were compared between altitudes and relationships between pulse oximetry, Lake Louise score, and sway velocity were explored. Total sway velocity during standing balance with eyes open (p = 0.003, d = 1.9) and during Sharpened Romberg test with eyes open (p = 0.007, d = 1.6) was significantly greater at altitudes of 3619m and 5140m when compared with sea level. Anterior-posterior sway velocity during standing balance with eyes open was also significantly greater at altitudes of 3619m and 5140m when compared with sea level (p = 0.001, d = 1.9). Knee joint position sense was not altered at higher altitudes. There were no significant correlations between Lake Louise scores, pulse oximetry and postural sway. Despite a gradual ascent profile, exposure to 3619 m was associated with impairments in postural control without impairment in knee joint position sense. Importantly, these impairments did not worsen at higher altitudes of 4600 m or 5140 m. The present findings should be considered during future trekking expeditions when developing training strategies targeted to manage impairments in postural control that occur with increasing altitude.

Study on disposal method of graphite blocks and storage of spent fuel for modular gas-cooled reactor. Joint research

Energy Technology Data Exchange (ETDEWEB)

Sumita, Junya; Sawa, Kazuhiro; Kunitomi, Kazuhiko [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Tsuchie, Yasuo; Urakami, Masao [Japan Atomic Power Co., Tokyo (Japan)

2003-02-01

This report describes the result of study on disposal method of graphite blocks in future block-type reactor. Present study was carried out within a framework of joint research, ''Research of Modular High Temperature Gas-cooled Reactors (No. 3)'', between Japan Atomic Energy Research Institute (JAERI) and the Japan Atomic Power Company (JAPCO), in 2000. In this study, activities in fuel and reflector graphite blocks were evaluated and were compared with the disposal limits defined as low-level of radioactive waste. As a result, it was found that the activity for only C-14 was higher than disposal limits for the low-level of radioactive waste and that the amount of air in the graphite is important to evaluate precisely of C-14 activity. In addition, spent fuels can be stored in air-cooled condition at least after two years cooling in the storage pool. (author)

Neuroendorine differentiation in prostate cancer: A mechanism of radioresistance and treatment failure

Directory of Open Access Journals (Sweden)

Chang-Deng eHu

2015-04-01

Full Text Available Neuroendocrine differentiation (NED in prostate cancer is a well recognized phenotypic change by which prostate cancer cells transdifferentiate into neuroendocrine-like (NE-like cells. NE-like cells lack the expression of androgen receptor and prostate specific antigen, and are resistant to treatments. In addition, NE-like cells secrete peptide hormones and growth factors to support the growth of surrounding tumor cells in a paracrine manner. Accumulated evidence has suggested that NED is associated with disease progression and poor prognosis. The importance of NED in prostate cancer progression and therapeutic response is further supported by the fact that therapeutic agents, including androgen deprivation therapy, chemotherapeutic agents, and radiotherapy, also induce NED. We will review the work supporting the overall hypothesis that therapy-induced NED is a mechanism of resistance to treatments, as well as discuss the relationship between therapy-induced NED and therapy-induced senescence, epithelial-to-mesenchymal transition, and cancer stem cells. Furthermore, we will use radiation-induced NED as a model to explore several NED-based targeting strategies for development of novel therapeutics. Finally, we propose future studies that will specifically address therapy-induced NED in the hope that a better treatment regimen for prostate cancer can be developed.

Experimental and theoretical investigation of column - flat slab joint ductility

International Nuclear Information System (INIS)

Iskhakov, I.; Ribakov, Y.; Shah, A.

2009-01-01

Most modern seismic codes use ductility as one of the basic design parameters. Actually, ductility defines the ability of a structure or its elements to absorb energy by plastic deformations. Until the end of the previous century ductility was defined qualitatively. Most research works related to ductility are focused on structural elements' sections. This study was aimed at complex experimental and theoretical investigation of flat slab-column joints ductility. It is one of the first attempts to obtain quantitative values of joint's ductility for the case of high strength concrete columns and normal strength concrete slabs. It was shown that the flat slab-column joint is a three-dimension (3D) element and its ductility in horizontal and vertical directions are different. This is the main difference between ductility of elements and joint ductility. In case of flat slab-column joints, essential contribution to joint's ductility can be obtained due to the slab's confining effect. Based on experimental data, the authors demonstrate that flat slab-column joint's ductility depends on the joint's confining effect in two horizontal and vertical directions. Furthermore, the influence of slab load intensity and slab reinforcement ratio on the joint's ductility is performed in this study. It is also demonstrated that the effect of the ratio between the slab thickness and the column's section dimension on the ductility parameter is significant. Equations for obtaining a quantitative value of a flat slab-column joint's ductility parameter were developed.

Basic research on energy conservation in developing countries. Basic research on promotion of activities implemented jointly (AIJ) (research on possibility of AIJ in developing countries); Hatten tojokoku energy shohi koritsuka kiso chosanado jigyo kyodo jisshi suishin kiso chosa. Hatten tojokoku ni okeru kyodo jisshi katsudo no kanosei chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The activities implemented jointly (AIJ) is expected as global measures to reduce greenhouse gas (such as CO2) emission. In this report, the possibility of AIJ projects in developing countries was researched. The United Nations Framework Convention on Climate Change was signed by 155 countries in 1992. This convention parties approved AIJ projects for measures against global warming. The 1st Conference of the Parties (COPI) held in 1995 approved the pilot phase of AIJ by voluntary workers jointly with developing countries until the end of this century. The trend, level and future plan of energy conservation technologies were researched and analyzed for steelmaking, cement and electric power supply industries in both the Philippine and Thailand. The possibility of AIJ projects was studied by selecting several Japanese energy conservation technologies transferable to both countries. The same research was also carried out for forest as carbon absorption source. 5 refs., 23 figs., 58 tabs.

Advanced Pavement Design: Finite Element Modeling for Rigid Pavement Joints, Report II: Model Development

National Research Council Canada - National Science Library

Hammons, Michael

1998-01-01

.... The objective of this research was to obtain data on the response of the ng'id pavement slab-joint-foundation system by conducting laboratory-scale experiments on jointed rigid pavement models...

Crafting continuity and change in Saudi society: Joint parent-youth transition-to-adulthood projects.

Science.gov (United States)

Khalifa, Hind; Alnuaim, Aziza A; Young, Richard A; Marshall, Sheila K; Popadiuk, Natalee

2018-02-01

Little is known about the transition to adulthood in traditional, developing countries such as Saudi Arabia. Previous research in other countries has revealed the importance of considering parents' support during the transition to adulthood. Thus, the purpose of this research was to examine how two generations negotiated the transition to adulthood. We asked the research question, What are the joint projects in which parents and youth plan and act on their plans for the youth's future? We used the action project method, an established qualitative approach, to answer these questions by observing the joint conversations of 14 parent and youth dyads. Our results provided evidence of an overarching higher level goal, or intentional framework, of crafting generational change and continuity within which participants' joint projects were embedded. Joint projects were organized into three groups: (a) negotiating educational and career futures, (b) promoting gender roles and marriage, and (c) shaping independence. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. All rights reserved.

A computational model for three-dimensional jointed media with a single joint set

International Nuclear Information System (INIS)

Koteras, J.R.

1994-02-01

This report describes a three-dimensional model for jointed rock or other media with a single set of joints. The joint set consists of evenly spaced joint planes. The normal joint response is nonlinear elastic and is based on a rational polynomial. Joint shear stress is treated as being linear elastic in the shear stress versus slip displacement before attaining a critical stress level governed by a Mohr-Coulomb faction criterion. The three-dimensional model represents an extension of a two-dimensional, multi-joint model that has been in use for several years. Although most of the concepts in the two-dimensional model translate in a straightforward manner to three dimensions, the concept of slip on the joint planes becomes more complex in three dimensions. While slip in two dimensions can be treated as a scalar quantity, it must be treated as a vector in the joint plane in three dimensions. For the three-dimensional model proposed here, the slip direction is assumed to be the direction of maximum principal strain in the joint plane. Five test problems are presented to verify the correctness of the computational implementation of the model

Thermal imaging in screening of joint inflammation and rheumatoid arthritis in children

International Nuclear Information System (INIS)

Lasanen, R; Julkunen, P; Töyräs, J; Piippo-Savolainen, E; Remes-Pakarinen, T; Kröger, L; Heikkilä, A; Karhu, J

2015-01-01

Potential of modern thermal imaging for screening and differentiation of joint inflammation has not been assessed in child and juvenile patient populations, typically demanding groups in diagnostics of musculoskeletal disorders. We hypothesize that thermal imaging can detect joint inflammation in patients with juvenile idiopathic arthritis or autoimmune disease with arthritis such as systemic lupus erythematosus. To evaluate the hypothesis, we studied 58 children exhibiting symptoms of joint inflammation. First, the patients’ joints were examined along clinical procedure supplemented with ultrasound imaging when deemed necessary by the clinician. Second, thermal images were acquired from patients’ knees and ankles. Results of thermal imaging were compared to clinical evaluations in knee and ankle. The temperatures were significantly (p max = 0.044, p mean  < 0.001) higher in inflamed ankle joints, but not in inflamed knee joints. No significant difference was found between the skin surface temperatures of medial and lateral aspects of ankle joints. In knee joints the mean temperatures of medial and lateral aspect differed significantly (p = 0.004). We have demonstrated that thermal imaging may have potential for detecting joint inflammation in ankle joints of children. For knee joints our results are inconclusive and further research is warranted. (paper)

A Modelling Method of Bolt Joints Based on Basic Characteristic Parameters of Joint Surfaces

Science.gov (United States)

Yuansheng, Li; Guangpeng, Zhang; Zhen, Zhang; Ping, Wang

2018-02-01

Bolt joints are common in machine tools and have a direct impact on the overall performance of the tools. Therefore, the understanding of bolt joint characteristics is essential for improving machine design and assembly. Firstly, According to the experimental data obtained from the experiment, the stiffness curve formula was fitted. Secondly, a finite element model of unit bolt joints such as bolt flange joints, bolt head joints, and thread joints was constructed, and lastly the stiffness parameters of joint surfaces were implemented in the model by the secondary development of ABAQUS. The finite element model of the bolt joint established by this method can simulate the contact state very well.

Joint ventures

DEFF Research Database (Denmark)

Sørensen, Karsten Engsig

Afhandlingen analysere de konkurrenceretlige og selskabsretlige regler som er bestemmende for hvordan et joint venture samarbejde er struktureret......Afhandlingen analysere de konkurrenceretlige og selskabsretlige regler som er bestemmende for hvordan et joint venture samarbejde er struktureret...

Quality of Colonoscopy Performed in Rural Practice: Experience From the Clinical Outcomes Research Initiative and the Oregon Rural Practice-Based Research Network.

Science.gov (United States)

Holub, Jennifer L; Morris, Cynthia; Fagnan, Lyle J; Logan, Judith R; Michaels, LeAnn C; Lieberman, David A

2018-02-01

Colon cancer screening is effective. To complete screening in 80% of individuals over age 50 years by 2018 will require adequate colonoscopy capacity throughout the country, including rural areas, where colonoscopy providers may have less specialized training. Our aim was to study the quality of colonoscopy in rural settings. The Clinical Outcomes Research Initiative (CORI) and the Oregon Rural Practice-based Research Network (ORPRN) collaborated to recruit Oregon rural practices to submit colonoscopy reports to CORI's National Endoscopic Database (NED). Ten ORPRN sites were compared to non-ORPRN rural (n = 11) and nonrural (n = 43) sites between January 2009 and October 2011. Established colonoscopy quality measures were calculated for all sites. No ORPRN physicians were gastroenterologists compared with 82% of nonrural physicians. ORPRN practices reached the cecum in 87.4% of exams compared with 89.3% of rural sites (P = .0002) and 90.9% of nonrural sites (P 9mm 16.6% vs 18.7% (P = .106). ORPRN sites performed well on most colonoscopy quality measures, suggesting that high-quality colonoscopy can be performed in rural settings. © 2016 National Rural Health Association.

A New Method for Determination of Joint Roughness Coefficient of Rock Joints

Directory of Open Access Journals (Sweden)

Shigui Du

2015-01-01

Full Text Available The joint roughness coefficient (JRC of rock joints has the characteristic of scale effect. JRC measured on small-size exposed rock joints should be evaluated by JRC scale effect in order to obtain the JRC of actual-scale rock joints, since field rock joints are hardly fully exposed or well saved. Based on the validity analysis of JRC scale effect, concepts of rate of JRC scale effect and effective length of JRC scale effect were proposed. Then, a graphic method for determination of the effective length of JRC scale effect was established. Study results show that the JRC of actual-scale rock joints can be obtained through a fractal model of JRC scale effect according to the statistically measured results of the JRC of small-size partial exposed rock joints and by the selection of fractal dimension of JRC scale effect and the determination of effective length of JRC scale effect.

Joint Attention, Social-Cognition, and Recognition Memory in Adults

Science.gov (United States)

Kim, Kwanguk; Mundy, Peter

2012-01-01

The early emerging capacity for Joint Attention (JA), or socially coordinated visual attention, is thought to be integral to the development of social-cognition in childhood. Recent studies have also begun to suggest that JA affects adult cognition as well, but methodological limitations hamper research on this topic. To address this issue we developed a novel virtual reality paradigm that integrates eye-tracking and virtual avatar technology to measure two types of JA in adults, Initiating Joint Attention (IJA) and Responding to Joint Attention (RJA). Distinguishing these types of JA in research is important because they are thought to reflect unique, as well as common constellations of processes involved in human social-cognition and social learning. We tested the validity of the differentiation of IJA and RJA in our paradigm in two studies of picture recognition memory in undergraduate students. Study 1 indicated that young adults correctly identified more pictures they had previously viewed in an IJA condition (67%) than in a RJA (58%) condition, η2 = 0.57. Study 2 controlled for IJA and RJA stimulus viewing time differences, and replicated the findings of Study 1. The implications of these results for the validity of the paradigm and research on the affects of JA on adult social-cognition are discussed. PMID:22712011

Comparison of tibiofemoral joint space width measurements from standing CT and fixed flexion radiography.

Science.gov (United States)

Segal, Neil A; Frick, Eric; Duryea, Jeffrey; Nevitt, Michael C; Niu, Jingbo; Torner, James C; Felson, David T; Anderson, Donald D

2017-07-01

The objective of this project was to determine the relationship between medial tibiofemoral joint space width measured on fixed-flexion radiographs and the three-dimensional joint space width distribution on low-dose, standing CT (SCT) imaging. At the 84-month visit of the Multicenter Osteoarthritis Study, 20 participants were recruited. A commercial SCT scanner for the foot and ankle was modified to image knees while standing. Medial tibiofemoral joint space width was assessed on radiographs at fixed locations from 15% to 30% of compartment width using validated software and on SCT by mapping the distances between three-dimensional subchondral bone surfaces. Individual joint space width values from radiographs were compared with three-dimensional joint space width values from corresponding sagittal plane locations using paired t-tests and correlation coefficients. For the four medial-most tibiofemoral locations, radiographic joint space width values exceeded the minimal joint space width on SCT by a mean of 2.0 mm and were approximately equal to the 61st percentile value of the joint space width distribution at each respective sagittal-plane location. Correlation coefficients at these locations were 0.91-0.97 and the offsets between joint space width values from radiographs and SCT measurements were consistent. There were greater offsets and variability in the offsets between modalities closer to the tibial spine. Joint space width measurements on fixed-flexion radiographs are highly correlated with three-dimensional joint space width from SCT. In addition to avoiding bony overlap obscuring the joint, a limitation of radiographs, the current study supports a role for SCT in the evaluation of tibiofemoral OA. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1388-1395, 2017. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

The Cost of Jointness: Insights from Environmental Monitoring Systems in Low-Earth Orbit

Energy Technology Data Exchange (ETDEWEB)

Dwyer, Morgan Maeve [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-09-01

This report summarizes the results of doctoral research that explored the cost impact of acquiring complex government systems jointly. The report begins by reviewing recent evidence that suggests that joint programs experience greater cost growth than non-joint programs. It continues by proposing an alternative approach for studying cost growth on government acquisition programs and demonstrates the utility of this approach by applying it to study the cost of jointness on three past programs that developed environmental monitoring systems for low-Earth orbit. Ultimately, the report concludes that joint programs' costs grow when the collaborating government agencies take action to retain or regain their autonomy. The report provides detailed qualitative and quantitative data in support of this conclusion and generalizes its findings to other joint programs that were not explicitly studied here. Finally, it concludes by presenting a quantitative model that assesses the cost impacts of jointness and by demonstrating how government agencies can more effectively architect joint programs in the future.

Joint venture schemes in Limpopo Province and their outcomes on smallholder farmers livelihoods

Science.gov (United States)

Mapedza, Everisto; van Koppen, Barbara; Sithole, Pinimidzai; Bourblanc, Magalie

2016-04-01

Joint Venture schemes based on the floppy irrigation technology are being promoted in the post-Apartheid South Africa's Limpopo Province. Access to land and water resources in South Africa are largely viewed as a mechanism for re-dressing the Apartheid injustices. This research was part of a broader applied research to help inform irrigation practise in the Limpopo Province. The research used literature review, key informant interviews and a questionnaire survey. The overall research question sought to understand how the Joint Venture Schemes had benefited the smallholder farmers. This paper argues that the joint venture partnership created a new injustice. Firstly, the Joint Venture Scheme design is fundamentally a bad idea which disempower farmers not only to water access but also land as well. The choice of the 'efficient' floppy irrigation technology was made by the state and entailed that land had to be managed as a single unit. In order to make more effective use of this highly sophisticated new technology, the smallholder farmers also needed to go into a joint venture partnership with a white commercial farmer. By virtue of signing the Joint Venture agreement the farmers were also forfeiting their land and water rights to be used for crop production. The smallholder farmers lost access to their water and land resources and were largely relegated to sharing profits - when they exist - with hardly any skills development despite what was initially envisaged in the Joint Venture partnership. Secondly, the implementation of the JVS has been skewed from the start which explains the bad results. This paper further shows how the negative outcomes affected women in particular. As the smallholder farmers argue the technological options chosen by the state have excluded both male and female farmers from accessing and utilising their land and water resources in order to improve their livelihoods; it has entrenched the role of the state and the private interests at the

Operations Research Games : A Survey

NARCIS (Netherlands)

Borm, P.E.M.; Hamers, H.J.M.; Hendrickx, R.L.P.

2001-01-01

This paper surveys the research area of cooperative games associated with several types of operations research problems in which various decision makers (players) are involved.Cooperating players not only face a joint optimisation problem in trying, e.g., to minimise total joint costs, but also face

Estimation of ground reaction forces and joint moments on the basis on plantar pressure insoles and wearable sensors for joint angle measurement.

Science.gov (United States)

Ostaszewski, Michal; Pauk, Jolanta

2018-05-16

Gait analysis is a useful tool medical staff use to support clinical decision making. There is still an urgent need to develop low-cost and unobtrusive mobile health monitoring systems. The goal of this study was twofold. Firstly, a wearable sensor system composed of plantar pressure insoles and wearable sensors for joint angle measurement was developed. Secondly, the accuracy of the system in the measurement of ground reaction forces and joint moments was examined. The measurements included joint angles and plantar pressure distribution. To validate the wearable sensor system and examine the effectiveness of the proposed method for gait analysis, an experimental study on ten volunteer subjects was conducted. The accuracy of measurement of ground reaction forces and joint moments was validated against the results obtained from a reference motion capture system. Ground reaction forces and joint moments measured by the wearable sensor system showed a root mean square error of 1% for min. GRF and 27.3% for knee extension moment. The correlation coefficient was over 0.9, in comparison with the stationary motion capture system. The study suggests that the wearable sensor system could be recommended both for research and clinical applications outside a typical gait laboratory.

Laboratory characterization of rock joints

International Nuclear Information System (INIS)

Hsiung, S.M.; Kana, D.D.; Ahola, M.P.; Chowdhury, A.H.; Ghosh, A.

1994-05-01

A laboratory characterization of the Apache Leap tuff joints under cyclic pseudostatic and dynamic loads has been undertaken to obtain a better understanding of dynamic joint shear behavior and to generate a complete data set that can be used for validation of existing rock-joint models. Study has indicated that available methods for determining joint roughness coefficient (JRC) significantly underestimate the roughness coefficient of the Apache Leap tuff joints, that will lead to an underestimation of the joint shear strength. The results of the direct shear tests have indicated that both under cyclic pseudostatic and dynamic loadings the joint resistance upon reverse shearing is smaller than that of forward shearing and the joint dilation resulting from forward shearing recovers during reverse shearing. Within the range of variation of shearing velocity used in these tests, the shearing velocity effect on rock-joint behavior seems to be minor, and no noticeable effect on the peak joint shear strength and the joint shear strength for the reverse shearing is observed

THE RELATIONSHIP BETWEEN TEMPOROMANDIBULAR-JOINT MOBILITY AND PERIPHERAL JOINT MOBILITY RECONSIDERED

NARCIS (Netherlands)

Dijkstra, P.U.; DEBONT, L.G.M.; VANDERWEELE, L.T.; Boering, G.

The purpose of this paper was to study the relationship between temporomandibular joint (TMJ) mobility and mobility of joints and to study the general character of joint mobility in 83 subjects, 55 females and 28 males (mean age 26.7, range 13-46 years). The subjects were recruited from the

Dual joint space arthrography in temporomandibular joint disorders: Comparison with single inferior joint space arthrography

Energy Technology Data Exchange (ETDEWEB)

Choi, Hyung Sik; Chang, Duk Soo; Lee, Kyung Soo; Kim, Woo Sun; Sung, Jung Ho; Jun, Young Hwan [Capital Armed Forces General Hospital, Seoul (Korea, Republic of)

1989-02-15

The temporomandibular joint(TMJ) is really a complex of two synovial space separated by fibrocartilaginous disc. Single inferior joint space arthrography is commonly performed for evaluation of TMJ disorders, which is known to be superior in demonstrating joint dynamics. But it reveals only the inferior surface of the disc. Therefore, dual space arthrography is superior to demonstrate the soft tissue anatomic feature of the joint such as disc position and shape. Authors performed 83 TMJ arthrograms in TMJ problems. Initially, the inferior joint space was done and then the superior space was sequentially contrasted. The follow results were noted: 1. In all cases, dual space arthrography revealed accurate disc shape and positions. 2. Concordant findings between the two techniques: 68 cases (82%). Discordance between the two techniques: 15 cases (18%) 3. Possible causes of discordance between inferior and dual space arthrography. a) Normal varians of anterior recess: 3 cases b) Posterior disc displacement: 4 cases c) Influence of the patient's head position change :4 cases d) False perforation: 2 cases e) Reduction change: 2 cases 4. In 5 cases with anterior displacement, dual space arthrography gave additional findings such as adhesion within the superior space, which could not be evaluated by single inferior space.

IMPLEMENTATION OF ESG FOR INTERNATIONAL JOINT EDUCATION PROGRAMMES

Directory of Open Access Journals (Sweden)

Vera I. Zabotkina

2016-12-01

Full Text Available Introduction: joint international programmes stimulate staff and student mobility, provide joint studies, provide development of joint study programmes of excellence, and open up new possibilities for cooperation between countries. Promotion and development of joint international programmes depend on effective quality assurance system which is high on the universities` priority list. ESG provide solid basis for the quality assurance system development at both institutional and programme levels. The problems of ESG interpretation in compliance with national legislative systems and education traditions in the countries participating in Bologna process are paid much attention to. Our emphases are on the practical aspects of ESG (2015 version implementation. The article concentrates on one of the most acute problems facing Russian Higher Education Institutions in the field of development and promotion of joint international programs: the problem of setting up modern quality assurance systems compatible with those in European HEIs is closely correlating with the profile of the journal “Integration of Education”. The journal centers around the publications on the enhancement and dissemination of the best practices on integration of regional education in Russia and abroad. Materials and Methods: methodical and practical aspects of the implementation of the ESG provisions for international joint educational programs on the basis of the European approach to education quality are the materials of study. The descriptive method, analysis of documents about education quality, and synthesis were used as research methods. Results: the authors come up with concrete recommendations for the implementation of the ESG renewed version (2015 in Quality Assurance systems of joint international programmes. This approach enhances the practical value of ESG. Modern Quality Assurance system is one of the main prerequisites for the successful collaboration among higher

Op og ned

DEFF Research Database (Denmark)

2015-01-01

Prolog Her i 2014 færdiggøres to udsmykninger af Michael Mørk. Det ene er integreret i ny bygning til Københavns Universitet, og den anden er transformationen af den eksisterende udsmykning på Regionshospital Randers. Holdes de to projekter op mod hinanden, viser der sig tre problemstillinger, der...

Conventional Versus Automated Implantation of Loose Seeds in Prostate Brachytherapy: Analysis of Dosimetric and Clinical Results

International Nuclear Information System (INIS)

Genebes, Caroline; Filleron, Thomas; Graff, Pierre; Jonca, Frédéric; Huyghe, Eric; Thoulouzan, Matthieu; Soulie, Michel; Malavaud, Bernard; Aziza, Richard; Brun, Thomas; Delannes, Martine; Bachaud, Jean-Marc

2013-01-01

Purpose: To review the clinical outcome of I-125 permanent prostate brachytherapy (PPB) for low-risk and intermediate-risk prostate cancer and to compare 2 techniques of loose-seed implantation. Methods and Materials: 574 consecutive patients underwent I-125 PPB for low-risk and intermediate-risk prostate cancer between 2000 and 2008. Two successive techniques were used: conventional implantation from 2000 to 2004 and automated implantation (Nucletron, FIRST system) from 2004 to 2008. Dosimetric and biochemical recurrence-free (bNED) survival results were reported and compared for the 2 techniques. Univariate and multivariate analysis researched independent predictors for bNED survival. Results: 419 (73%) and 155 (27%) patients with low-risk and intermediate-risk disease, respectively, were treated (median follow-up time, 69.3 months). The 60-month bNED survival rates were 95.2% and 85.7%, respectively, for patients with low-risk and intermediate-risk disease (P=.04). In univariate analysis, patients treated with automated implantation had worse bNED survival rates than did those treated with conventional implantation (P<.0001). By day 30, patients treated with automated implantation showed lower values of dose delivered to 90% of prostate volume (D90) and volume of prostate receiving 100% of prescribed dose (V100). In multivariate analysis, implantation technique, Gleason score, and V100 on day 30 were independent predictors of recurrence-free status. Grade 3 urethritis and urinary incontinence were observed in 2.6% and 1.6% of the cohort, respectively, with no significant differences between the 2 techniques. No grade 3 proctitis was observed. Conclusion: Satisfactory 60-month bNED survival rates (93.1%) and acceptable toxicity (grade 3 urethritis <3%) were achieved by loose-seed implantation. Automated implantation was associated with worse dosimetric and bNED survival outcomes

Conventional Versus Automated Implantation of Loose Seeds in Prostate Brachytherapy: Analysis of Dosimetric and Clinical Results

Energy Technology Data Exchange (ETDEWEB)

Genebes, Caroline, E-mail: genebes.caroline@claudiusregaud.fr [Radiation Oncology Department, Institut Claudius Regaud, Toulouse (France); Filleron, Thomas; Graff, Pierre [Radiation Oncology Department, Institut Claudius Regaud, Toulouse (France); Jonca, Frédéric [Department of Urology, Clinique Ambroise Paré, Toulouse (France); Huyghe, Eric; Thoulouzan, Matthieu; Soulie, Michel; Malavaud, Bernard [Department of Urology and Andrology, CHU Rangueil, Toulouse (France); Aziza, Richard; Brun, Thomas; Delannes, Martine; Bachaud, Jean-Marc [Radiation Oncology Department, Institut Claudius Regaud, Toulouse (France)

2013-11-15

Purpose: To review the clinical outcome of I-125 permanent prostate brachytherapy (PPB) for low-risk and intermediate-risk prostate cancer and to compare 2 techniques of loose-seed implantation. Methods and Materials: 574 consecutive patients underwent I-125 PPB for low-risk and intermediate-risk prostate cancer between 2000 and 2008. Two successive techniques were used: conventional implantation from 2000 to 2004 and automated implantation (Nucletron, FIRST system) from 2004 to 2008. Dosimetric and biochemical recurrence-free (bNED) survival results were reported and compared for the 2 techniques. Univariate and multivariate analysis researched independent predictors for bNED survival. Results: 419 (73%) and 155 (27%) patients with low-risk and intermediate-risk disease, respectively, were treated (median follow-up time, 69.3 months). The 60-month bNED survival rates were 95.2% and 85.7%, respectively, for patients with low-risk and intermediate-risk disease (P=.04). In univariate analysis, patients treated with automated implantation had worse bNED survival rates than did those treated with conventional implantation (P<.0001). By day 30, patients treated with automated implantation showed lower values of dose delivered to 90% of prostate volume (D90) and volume of prostate receiving 100% of prescribed dose (V100). In multivariate analysis, implantation technique, Gleason score, and V100 on day 30 were independent predictors of recurrence-free status. Grade 3 urethritis and urinary incontinence were observed in 2.6% and 1.6% of the cohort, respectively, with no significant differences between the 2 techniques. No grade 3 proctitis was observed. Conclusion: Satisfactory 60-month bNED survival rates (93.1%) and acceptable toxicity (grade 3 urethritis <3%) were achieved by loose-seed implantation. Automated implantation was associated with worse dosimetric and bNED survival outcomes.

Cryotherapy does not impair shoulder joint position sense.

Science.gov (United States)

Dover, Geoffrey; Powers, Michael E

2004-08-01

To determine the effects of a cryotherapy treatment on shoulder proprioception. Crossover design with repeated measures. University athletic training and sports medicine research laboratory. Thirty healthy subjects (15 women, 15 men). A 30-minute cryotherapy treatment. Joint position sense was measured in the dominant shoulder by using an inclinometer before and after receiving 30 minutes of either no ice or a 1-kg ice bag application. Skin temperature was measured below the tip of the acromion process and recorded every 5 minutes for the entire 30 minutes and immediately after testing. Three different types of error scores were calculated for data analyses and used to determine proprioception. Separate analyses of absolute, constant, and variable error failed to identify changes in shoulder joint proprioception as a function of the cryotherapy application. Application of an ice bag to the shoulder does not impair joint position sense. The control of proprioception at the shoulder may be more complex than at other joints in the body. Clinical implications may involve modifying rehabilitation considerations when managing shoulder injuries.

Joint Electromagnetic Spectrum Management Operations

Science.gov (United States)

2012-03-20

promulgate command-specific policy and guidance for EMS use, the joint restricted frequency list (JRFL) process, the joint communications–electronics...joint communications–electronics operating instructions (JCEOI) and joint restricted frequency list (JRFL). Examples of FM include providing the...joint restricted frequency list Figure III-4. Joint Frequency Management Office Spectrum Management Process Chapter III III-10 JP 6-01 assignments

Effect of changes in the moisture content due to surrounding relative humidity on the contact stress in traditional mortise and tenon joints III : pull-out strength of compressed sugi komisen joints

NARCIS (Netherlands)

Jung, K.; Kitamori, A.; Leijten, A.J.M.; Komatsu, K.

2006-01-01

This research is focused on evaluating the efficiency and failure mechanism of joints using a komisen (Japanese traditional square key) of compressed sugi (Japanese ceder ;Cryptomeria japonica D. Don), and to evaluate to what extend hozo-komisen (Japanese traditional mortise and tenon) joint

Fast Approximate Joint Diagonalization Incorporating Weight Matrices

Czech Academy of Sciences Publication Activity Database

Tichavský, Petr; Yeredor, A.

2009-01-01

Roč. 57, č. 3 (2009), s. 878-891 ISSN 1053-587X R&D Projects: GA MŠk 1M0572 Institutional research plan: CEZ:AV0Z10750506 Keywords : autoregressive processes * blind source separation * nonstationary random processes Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 2.212, year: 2009 http://library.utia.cas.cz/separaty/2009/SI/tichavsky-fast approximate joint diagonalization incorporating weight matrices.pdf

Refining patterns of joint hypermobility, habitus, and orthopedic traits in joint hypermobility syndrome and Ehlers-Danlos syndrome, hypermobility type.

Science.gov (United States)

Morlino, Silvia; Dordoni, Chiara; Sperduti, Isabella; Venturini, Marina; Celletti, Claudia; Camerota, Filippo; Colombi, Marina; Castori, Marco

2017-04-01

Joint hypermobility syndrome (JHS) and Ehlers-Danlos syndrome, hypermobility type (EDS-HT) are two overlapping heritable disorders (JHS/EDS-HT) recognized by separated sets of diagnostic criteria and still lack a confirmatory test. This descriptive research was aimed at better characterizing the clinical phenotype of JHS/EDS-HT with focus on available diagnostic criteria, and in order to propose novel features and assessment strategies. One hundred and eighty-nine (163 females, 26 males; age: 2-73 years) patients from two Italian reference centers were investigated for Beighton score, range of motion in 21 additional joints, rate and sites of dislocations and sprains, recurrent soft-tissue injuries, tendon and muscle ruptures, body mass index, arm span/height ratio, wrist and thumb signs, and 12 additional orthopedic features. Rough rates were compared by age, sex, and handedness with a series of parametric and non-parametric tools. Multiple correspondence analysis was carried out for possible co-segregations of features. Beighton score and hypermobility at other joints were influenced by age at diagnosis. Rate and sites of joint instability complications did not vary according to age at diagnosis except for soft-tissue injuries. No major difference was registered by sex and dominant versus non-dominant body side. At multiple correspondence analysis, selected features tend to co-segregate in a dichotomous distribution. Dolichostenomelia and arachnodactyly segregated independently. This study pointed out a more protean musculoskeletal phenotype than previously considered according to available diagnostic criteria for JHS/EDS-HT. Our findings corroborated the need for a re-thinking of JHS/EDS-HT on clinical grounds in order to find better therapeutic and research strategies. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Joint diseases

International Nuclear Information System (INIS)

Weissman, S.D.

1989-01-01

The authors discuss how x-ray examination is essential in the diagnosis and evaluation of the arthritides. Most arthritides are first suspected by the clinician, and x-ray evaluation of these entities along with laboratory testing is important for confirmation of the clinical diagnosis and in staging of the disease process. Several arthritides are often diagnosed first by the podiatrist on x-ray evaluation, including pseudogout, ankylosing spondylitis, early rheumatoid arthritis, degenerative joint disease, and tuberculosis of bone. The joint responds to insult in only a limited number of ways that become apparent on x-ray. The soft tissues surrounding the joint, the articulating bones, and alignment of the joint space may all be involved by the arthritic process. On roentgenographic examination, the soft tissues must be examined for edema, masses, calcifications, and atrophy. The articulating bones must be examined for demineralization, erosions, osteophytes, periosteal reaction, cysts and sclerosis

STRUCTURE OF MORPHOLOGIC CHARACTERISTICS OF BODYBUILDERS

Directory of Open Access Journals (Sweden)

Vladimir Mutavdžić

2007-05-01

Full Text Available Today body-building as a spport is well known and accepted world-wide. When scientifi researches on this fi eld are in question, it is evident that they are very rare partly and probably due to its real interpretation as well as due to its insuffi cient affi rmation and popularization here. Reason for this is also the wrong interpretation of the sport’s essence among sports-people – the body-builders themselves and among the experts and scientists from this fi eld. Intrest in the research of morphological sphere of body-builders was inspired by the fact that exercising body-building is a very specifi c physical activity that, due to its nature, demands body-builders to have specifi c morphological characteristics that characterize and differ them from other sports-people. The goal of this research was determining the structure of the morhologicall sphere of a body-builder. It was performed on the sample of 30 selected sportsmen, bodybuilders, of chronological age between 17 and 19 ( 6 months, members of the Sports' Club Strength ''Leskovac'', the Weight Lifters' Club '' Dubočica'' and the Body-building Club '' Dubočica'' from Leskovac. All the examiees have been submitted to training processes during a period longer than a year. For the purpose of determining the structure of the morphological sphere the Factor Analysis has been applied. Based on the data from the matrix of the Factor Structure the isolated factors can be interpreted in the following manner: The fi rst isolated factor in the sphere of applied anthropometric variables can be defi ned as a dimension of the body-volume and the transversal dimensionality of the skeleton sine it’s best defi ned by the following variables: the chest-circumference (AOGKS, the upper-arm circumference (AONAD, the thigh circumference (AOBUT, the body-weight (AMAST and the shoulder-width (ASIRA. The second isolated factor in the sphere of applied anthropometric variables can be defi ned as the

High current density, cryogenically cooled sliding electrical joint development

International Nuclear Information System (INIS)

Murray, H.

1986-09-01

In the past two years, conceptual designs for fusion energy research devices have focussed on compact, high magnetic field configurations. The concept of sliding electrical joints in the large magnets allows a number of technical advantages including enhanced mechanical integrity, remote maintainability, and reduced project cost. The rationale for sliding electrical joints is presented. The conceptual configuration for this generation of experimental devices is highlghted by an ∼ 20 T toroidal field magnet with a flat top conductor current of ∼ 300 kA and a sliding electrical joint with a gross current density of ∼ 0.6 kA/cm 2 . A numerical model was used to map the conductor current distribution as a function of time and position in the conductor. A series of electrical joint arrangements were produced against the system code envelope constraints for a specific version of the Ignition Studies Project (ISP) which is designated as 1025

Estimation of RC slab-column joints effective strength using neural networks

Directory of Open Access Journals (Sweden)

A. A. Shah

Full Text Available The nominal strength of slab-column joints made of highstrength concrete (HSC columns and normal strength concrete (NSC slabs is of great importance in structural design and construction of concrete buildings. This topic has been intensively studied during the last decades. Different types of column-slab joints have been investigated experimentally providing a basis for developing design provisions. However, available data does not cover all classes of concretes, reinforcements, and possible loading cases for the proper calculation of joint stresses necessary for design purposes. New numerical methods based on modern software seem to be effective and may allow reliable prediction of column-slab joint strength. The current research is focused on analysis of available experimental data on different slab-to-column joints with the aim of predicting the nominal strength of slabcolumn joint. Neural networks technique is proposed herein using MATLAB routines developed to analyze available experimental data. The obtained results allow prediction of the effective strength of column-slab joints with accuracy and good correlation coefficients when compared to regression based models. The proposed method enables the user to predict the effective design of column-slab joints without the need for conservative safety coefficients generally promoted and used by most construction codes.

Tensile Properties of Under-Matched Weld Joints for 950 MPa Steel.

Science.gov (United States)

Yamamoto, Kouji; Arakawa, Toshiaki; Akazawa, Nobuki; Yamamoto, Kousei; Matsuo, Hiroki; Nakagara, Kiyoyuki; Suita, Yoshikazu

In welding of 950 MPa-class high tensile strength steel, preheating is crucial in order to avoid cold cracks, which, however, eventually increases welding deformations. One way to decrease welding deformations is lowering preheating temperature by using under-matched weld metal. Toyota and others clarify that although breaking elongation can decrease due to plastic constraint effect under certain conditions, static tensile of under-matched weld joints is comparable to that of base metal. However, there has still been no report about joint static tensile of under-matched weld joints applied to 950 MPa-class high tensile strength steel. In this study, we aim to research tensile strength and fatigue strength of under-matched weld joints applied to 950 MPa-class high tensile steel.

Imaging findings of charcot joint

International Nuclear Information System (INIS)

Meng Quanfei; Zhou Chunxiang; Chen Yingming; Jiang Bo

2003-01-01

Objective: To analyze the MRI characters of Charcot joint, and to evaluate the diagnostic value of X-ray, CT, and MRI on Charcot joint. Methods: Eight patients with 8 Charcot joints underwent X-ray, CT, and MR examinations. 6 of them had syringomyelia, 1 patient had injury of the spinal cord, and 1 case had diabetes. All 8 patients had sensory reduction or deficit in the sick extremities. Results: There were two types of Charcot joint, hypertrophic and atrophic. Radiographic and CT features of hypertrophic joint (n=3) showed hyperostotic osteosclerosis and mammoth osteophytes in the sick bones, periarticular ossification, and articular disorganization. Radiographic and CT features of atrophic joint (n=5) showed extensive bone resorption (destruction), periarticular debris, and articular disorganization. Main MRI features of Charcot joint included hydrarthrosis within joint capsule, thickened, loose, and elongated joint capsule with para-joint, peri-diaphysis, and inter-muscular extension in a pseudopodia pattern. The irregular joint capsule wall was presented as mild hypointensity on T 1 WI, slight hyper-intensity on T 2 WI, and was markedly enhanced after Gd-DTPA was administrated, which was considered as a characteristic manifestation of the lesion. Soft tissue mass containing hypo-intense stripes on both T 1 WI and T 2 WI was commonly noted adjacent to the involved joint. Conclusion: X-rays plain film is the first choice for the diagnosis of Charcot joint, and MRI is pretty useful in the diagnosis of Charcot joint

INSA - AASAA joint workshop | Women in Science | Initiatives ...

Indian Academy of Sciences (India)

Presentations at the INSA-AASAA joint workshop on "Women in Science, Education and Research" ... Mon-Shu Ho, National ChungHsing University, Nepal ... Charusita Chakravarty, one of the stars of our community of women scientists, at a ...

75 FR 20002 - Notice Pursuant to the National Cooperative Research and Production Act of 1993 Joint Venture...

Science.gov (United States)

2010-04-16

... Production Act of 1993 Joint Venture Under Tip Award Number: 7ONANB1OHOO1 Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), the Joint Venture under TIP Award Number: 7ONANB1OHOO1... Trade Commission disclosing (1) the identities of the parties to the venture and (2) the nature and...

Proceedings of joint meeting of the 6th simulation science symposium and the NIFS collaboration research 'large scale computer simulation'

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-03-01

Joint meeting of the 6th Simulation Science Symposium and the NIFS Collaboration Research 'Large Scale Computer Simulation' was held on December 12-13, 2002 at National Institute for Fusion Science, with the aim of promoting interdisciplinary collaborations in various fields of computer simulations. The present meeting attended by more than 40 people consists of the 11 invited and 22 contributed papers, of which topics were extended not only to fusion science but also to related fields such as astrophysics, earth science, fluid dynamics, molecular dynamics, computer science etc. (author)

Clinical radiation diagnostics of shoulder joint impingement syndrome

International Nuclear Information System (INIS)

Litvin, Yu.P.; Logvinenko, V.V.

2014-01-01

46 patients about an impingement are investigated by a syndrome of a humeral joint. Among them men was 28 (60,9 %) the person, women 18 (39,1 %). Middle age of the surveyed has made 52,6 ± 2,0 year. The traditional roentgenography is executed to all patients, a spiral computer tomography - 5 (10,9 %), an ultrasonography - 44 (95,7 %), a magnetic resonance imaging - 11 (23,9 %). Operative treatment is spent 16 (34,8 %) by the patient. Direct radial symptoms are what specify an impingement of a syndrome of a humeral joint in the reasons, indirect - symptoms of an inflammation both degenerate and dystrophic changes of structures of area of a humeral joint which are involved in pathological process. The best results are given by complex radial research at which it is possible to find out direct and indirect symptoms a syndrome impingement

Radiochemistry at the University of Missouri-Columbia. A joint venture with chemistry, nuclear engineering, molecular biology, biochemistry, and the Missouri University Research Reactor (MURR)

International Nuclear Information System (INIS)

Miller, W.H.; Duval, P.; Jurisson, S.S.; Robertson, J.D.; Wall, J.D.; Quinn, T.P.; Volkert, W.A.; Neumeyer, G.M.

2005-01-01

Missouri University, a recipient of a U.S. Department of Energy Radiochemistry Education Award Program (REAP) grant in 1999, has significantly expanded its education and research mission in radiochemistry. While MU had a viable radiochemistry program through existing faculty expertise and the utilization of the Missouri University Research Reactor, the REAP award allowed MU to leverage its resources in significantly expanding capabilities in radiochemistry. Specifically, the grant enabled the: (1) hiring of a new faculty member in actinide radiochemistry (Dr. Paul Duval); (2) support of six graduate students in radiochemistry; (3) purchase of new radiochemistry laboratory equipment; (4) more extensive collaboration with DOE scientists through interactions with faculty and graduate students, and (5) revised radiochemical curriculum (joint courses across disciplines and new courses in actinide chemistry). The most significant impact of this award has been in encouraging interdisciplinary education and research. The proposal was initiated by a joint effort between Nuclear Engineering and Chemistry, but also included faculty in biochemistry, radiology, and molecular biology. Specific outcomes of the REAP grant thus far are: (1) increased educational and research capabilities in actinide chemistry (faculty hire and equipment acquisition); (2) increased integration of biochemistry and radiochemistry (e.g., radiochemical analysis of uranium speciation in biological systems); (3) stronger interdisciplinary integration of molecular biology and radiochemical sciences (alpha-emitters for treating cancer); (4) new and more extensive interactions with national laboratory facilities (e.g., student internships at LANL and LLBL, faculty and lab scientist exchange visits, analytical measurements and collaboration with the Advanced Photon Source), and (7) new research funding opportunities based on REAP partnership. (author)

Joint Institute for Nanoscience Annual Report 2004

Energy Technology Data Exchange (ETDEWEB)

Baer, Donald R.; Campbell, Charles

2005-02-01

Due to the inherently interdisciplinary nature of nanoscience and nanotechnology, research in this arena is often significantly enhanced through creative cooperative activities. The Joint Institute for Nanoscience (JIN) is a venture of the University of Washington (UW) and Pacific Northwest National Laboratory (PNNL) to encourage and enhance high impact and high quality nanoscience and nanotechnology research that leverages the strengths and capabilities of both institutions, and to facilitate education in these areas. This report summarizes JIN award activities that took place during fiscal year 2004 and provides a historical list of JIN awardees, their resulting publications, and JIN-related meetings. Major portions of the JIN efforts and resources are dedicated to funding graduate students and postdoctoral research associates to perform research in collaborations jointly directed by PNNL staff scientists and UW professors. JIN fellowships are awarded on the basis of applications that include research proposals. They have been very successful in expanding collaborations between PNNL and UW, which have led to many excellent joint publications and presentations and enhanced the competitiveness of both institutions for external grant funding. JIN-based interactions are playing a significant role in creating new research directions and reshaping existing research programs at both the UW and PNNL. The JIN also co-sponsors workshops on Nanoscale Science and Technology, four of which have been held in Seattle and one in Richland. In addition to involving PNNL staff in various UW nanoscience courses and seminars, a National Science Foundation grant, Development of UW-PNL Collaborative Curriculums in Nano-Science and Technology, has allowed the development of three intensive short courses that are taught by UW faculty, PNNL staff, and faculty from other institutions, including Washington State University, the University of Idaho, Stanford University, and the University of

Rehabilitation after total joint replacement: a scoping study.

Science.gov (United States)

L Snell, Deborah; Hipango, Julia; Sinnott, K Anne; Dunn, Jennifer A; Rothwell, Alastair; Hsieh, C Jean; DeJong, Gerben; Hooper, Gary

2018-07-01

The evidence supporting rehabilitation after joint replacement, while vast, is of variable quality making it difficult for clinicians to apply the best evidence to their practice. We aimed to map key issues for rehabilitation following joint replacement, highlighting potential avenues for new research. We conducted a scoping study including research published between January 2013 and December 2016, evaluating effectiveness of rehabilitation following hip and knee total joint replacement. We reviewed this work in the context of outcomes described from previously published research. Thirty individual studies and seven systematic reviews were included, with most research examining the effectiveness of physiotherapy-based exercise rehabilitation after total knee replacement using randomized control trial methods. Rehabilitation after hip and knee replacement whether carried out at the clinic or monitored at home, appears beneficial but type, intensity and duration of interventions were not consistently associated with outcomes. The burden of comorbidities rather than specific rehabilitation approach may better predict rehabilitation outcome. Monitoring of recovery and therapeutic attention appear important but little is known about optimal levels and methods required to maximize outcomes. More work exploring the role of comorbidities and key components of therapeutic attention and the therapy relationship, using a wider range of study methods may help to advance the field. Implications for Rehabilitation Physiotherapy-based exercise rehabilitation after total hip replacement and total knee replacement, whether carried out at the clinic or monitored at home, appears beneficial. Type, intensity, and duration of interventions do not appear consistently associated with outcomes. Monitoring a patient's recovery appears to be an important component. The available research provides limited guidance regarding optimal levels of monitoring needed to achieve gains following hip

Combinations of partners’ joint venture formation motives

NARCIS (Netherlands)

Klijn, E.; Reuer, J.J.; Buckley, P.J.; Glaister, K.W.

2011-01-01

Purpose – Prior research on joint venture (JV) formation often examines a single focal firm and assumes it has a single motive for collaboration. This study seeks to investigate how formation motives of partner firms are symmetrically coupled. It considers motives in the context of different

3rd Joint Dutch-Brazil School on Theoretical Physics

CERN Document Server

2015-01-01

The Joint Dutch-Brazil School on Theoretical Physics is now in its third edition with previous schools in 2007 and 2011. This edition of the school will feature minicourses by Nima Arkani-Hamed (IAS Princeton), Jan de Boer (University of Amsterdam) and Cumrun Vafa (Harvard University), as well as student presentations. The school is jointly organized with the Dutch Research School of Theoretical Physics (DRSTP) and is intended for graduate students and researchers in the field of high-energy theoretical physics. There is no registration fee and limited funds are available for local and travel support of participants. This school in São Paulo will be preceded by the XVIII J. A. Swieca School in Campos de Jordão.

Formation of tough composite joints

International Nuclear Information System (INIS)

Brun, M.K.

1997-05-01

Joints which exhibit tough fracture behavior were formed in a composite with a Si/SiC matrix reinforced with Textron SCS-6 fibers with either boron nitride or silicon nitride fiber coatings. In composites with BN coatings fibers were aligned uniaxially, while composites with Si 3 N 4 -coated fibers had a 0/90 degree architecture. Lapped joints (joints with overlapping fingers) were necessary to obtain tough behavior. Geometrical requirements necessary to avoid brittle joint failure have been proposed. Joints with a simple overlap geometry (only a few fingers) would have to be very long in order to prevent brittle failure. Typical failure in these joints is caused by a crack propagating along the interfaces between the joint fingers. Joints of the same overall length, but with geometry changed to be symmetric about the joint centerline and with an extra shear surface exhibited tough fractures accompanied with extensive fiber pullout. The initial matrix cracking of these joints was relatively low because cracks propagated easily through the ends of the fingers. Joints with an optimized stepped sawtooth geometry produced composite-like failures with the stress/strain curves containing an elastic region followed by a region of rising stress with an increase of strain. Increasing the fiber/matrix interfacial strength from 9 to 25 MPa, by changing the fiber coating, increased matrix cracking and ultimate strength of the composite significantly. The best joints had matrix cracking stress and ultimate strength of 138 and 240 MPa, respectively. Joint failure was preceded by multiple matrix cracking in the entire composite. The high strength of the joints will permit building of structures containing joints with only a minor reduction of design stresses

Nuclear research and development in the European community

International Nuclear Information System (INIS)

1979-01-01

Research programmes undertaken by the European Atomic Energy Community and the European Economic Community are discussed. These programmes are carried out both at the Communities own Joint Research Centres (at Ispra, Karlsruhe, Geel and Petten) and also, although centrally managed by the Commission, at research organizations in the Member States. Such research projects include radioactive waste management and storage, decommissioning of nuclear power stations and nuclear fusion. Culham Laboratory is not only the centre for the UKAEA's research into controlled thermonuclear fusion but is also host to the Joint European Torus Joint Undertaking. (U.K.)

Research report of fiscal 1997. Joint research project on petroleum substituting energy between Japan and the EU; 1997 nendo chosa hokokusho. Nichi EU sekiyu daitai energy kanren kyodo kenkyu jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Four researchers were invited from EU countries to promote R & D of petroleum substituting energy in Japan, and the joint research was made in institutes of Agency of Industrial Science and Technology related to each theme for 50 days. On the research on deep geothermal prospecting based on volcanic halocarbon group, it was showed that halocarbon discharged from volcanic or hydrothermal system is an important window to survey activities within the earth. On the research on catalyst for hydrogenation of coal-derived liquid, XPS data was reported, and some preliminary conclusions were obtained. On the research on oxide system anode material for Li secondary cells, a method for improving the state of host to ion moving in 1-D to 3-D networks by diffraction method was showed. In particular, the method was effective to offer electronically sensitive environment to moving ion system. On the research on hydro-dechlorination of hydrocarbon halide, the theme related to environmental measures against waste hydrocarbon halide (depletion of the ozone layer) was studied. 83 refs., 32 figs., 20 tabs.

26th May 2011 -Delegate to CERN Open Council sessions and European Commission Head of Unit for Joint Programming European Research Area, DG Research and Innovation R. Lečbychová visiting the CERN Control Centre with M. Pojer, accompanied by CERN S. Stavrev.

CERN Multimedia

Maximilien Brice

2011-01-01

26th May 2011 -Delegate to CERN Open Council sessions and European Commission Head of Unit for Joint Programming European Research Area, DG Research and Innovation R. Lečbychová visiting the CERN Control Centre with M. Pojer, accompanied by CERN S. Stavrev.

FY 1998 annual report on the survey report on possibility of international joint researches for Asian countries. 5; 1998 nendo Asia chiiki kokusai kyodo kenkyu kanosei chosa hokokusho. 5

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Described herein are results of surveys on dissemination policies for, and development trends in, energy saving and new energy areas in 6 Asian countries, Thailand, Indonesia, Malaysia, the Philippines, India and China. Possible joint research themes for Indonesia include effective utilization of palm oil residue, modernization of distribution systems, high-efficiency coal-fired thermal power generation techniques, and promotion of dissemination of solar cells. For Malaysia, renewable energies, e.g., photovoltaic power, will be developed to promote electrification for those areas not well electrified. The Philippines is positively receiving technical and financial aids for new energy and energy-saving areas from the advanced countries. India is considering to introduce a number of projects for, e.g., technological optimization of power supply area, decentralized power generation, oil exploitation and extraction techniques, and photovoltaic power generation. China is still in the preliminary stage in its energy research and development, and will need further joint researches in the energy sector. (NEDO)

75 FR 14192 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Joint Venture...

Science.gov (United States)

2010-03-24

... Production Act of 1993--Joint Venture Under Tip Award No. 70NANB10H014 To Perform Project Entitled: Automated..., 15 U.S.C. 4301 et seq. (the Act''), the Joint Venture under TIP Award No. 70NANB10H014 to Perform... Commission disclosing (1) the identities of the parties to the venture and (2) the nature and objectives of...

75 FR 7628 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Joint Venture...

Science.gov (United States)

2010-02-22

... Production Act of 1993--Joint Venture Under TIP Award Number: 70NANB10H012 Notice is hereby given that, on..., 15 U.S.C. 5 4301 et seq. (``the Act''), the Joint Venture under TIP Award Number: 70NANB10H012... Commission disclosing (1) the identities of the parties to the venture and (2) the nature and objectives of...

75 FR 8116 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Joint Venture...

Science.gov (United States)

2010-02-23

... Production Act of 1993--Joint Venture Under Tip Award No. 70NANB10H009 Notice is hereby given that, on..., 15 U.S.C. 4301 et seq. (``the Act''), the Joint Venture under TIP Award No. 70NANB10H009 (``JV TIP... Commission disclosing (1) the identities of the parties to the venture and (2) the nature and objectives of...

Automatic Quantification of Radiographic Wrist Joint Space Width of Patients With Rheumatoid Arthritis.

Science.gov (United States)

Huo, Yinghe; Vincken, Koen L; van der Heijde, Desiree; de Hair, Maria J H; Lafeber, Floris P; Viergever, Max A

2017-11-01

Objective: Wrist joint space narrowing is a main radiographic outcome of rheumatoid arthritis (RA). Yet, automatic radiographic wrist joint space width (JSW) quantification for RA patients has not been widely investigated. The aim of this paper is to present an automatic method to quantify the JSW of three wrist joints that are least affected by bone overlapping and are frequently involved in RA. These joints are located around the scaphoid bone, viz. the multangular-navicular, capitate-navicular-lunate, and radiocarpal joints. Methods: The joint space around the scaphoid bone is detected by using consecutive searches of separate path segments, where each segment location aids in constraining the subsequent one. For joint margin delineation, first the boundary not affected by X-ray projection is extracted, followed by a backtrace process to obtain the actual joint margin. The accuracy of the quantified JSW is evaluated by comparison with the manually obtained ground truth. Results: Two of the 50 radiographs used for evaluation of the method did not yield a correct path through all three wrist joints. The delineated joint margins of the remaining 48 radiographs were used for JSW quantification. It was found that 90% of the joints had a JSW deviating less than 20% from the mean JSW of manual indications, with the mean JSW error less than 10%. Conclusion: The proposed method is able to automatically quantify the JSW of radiographic wrist joints reliably. The proposed method may aid clinical researchers to study the progression of wrist joint damage in RA studies. Objective: Wrist joint space narrowing is a main radiographic outcome of rheumatoid arthritis (RA). Yet, automatic radiographic wrist joint space width (JSW) quantification for RA patients has not been widely investigated. The aim of this paper is to present an automatic method to quantify the JSW of three wrist joints that are least affected by bone overlapping and are frequently involved in RA. These joints

JET joint undertaking. Annual report 1978

International Nuclear Information System (INIS)

1979-02-01

This document is intended for information only and should not be used as a technical reference. After an introductive part on the controlled nuclear fusion research and an historical survey of the JET project, are presented: the JET joint undertaking (members of council and committee...) with its administration (finance, personnel, external relations), and the scientific and technical department with its divisions for systems (experimental, magnet, plasma, assembly, power supplies, control and data acquisition, and site and building). In appendix is described the Euratom fusion research programme

Sourcebook of models for biomedical research

National Research Council Canada - National Science Library

Conn, P. Michael

2008-01-01

... have the advantage that the reproductive, mitotic, development or aging cycles are rapid compared with those in humans; others are utilized because individual proteins may be studied in an advantageous way and that have human homologs. Other organisms are facile to grow in laboratory settings or lend themselves to convenient analyses, have defined genomes or present especially good human models of human or animal disease. We have made an effort not to be seduced into making the entire book homage to the rem...

Experimental joint immobilization in guinea pigs. Effects on the knee joint

Science.gov (United States)

Marcondesdesouza, J. P.; Machado, F. F.; Sesso, A.; Valeri, V.

1980-01-01

In young and adult guinea pigs, the aftermath experimentally induced by the immobilization of the knee joint in hyperextended forced position was studied. Joint immobilization which varied from one to nine weeks was attained by plaster. Eighty knee joints were examined macro and microscopically. Findings included: (1) muscular hypotrophy and joint stiffness in all animals, directly proportional to the length of immobilization; (2) haemoarthrosis in the first week; (3) intra-articular fibrous tissue proliferation ending up with fibrous ankylosis; (4) hyaline articular cartilage erosions; (5) various degrees of destructive menisci changes. A tentative explanation of the fibrous tissue proliferation and of the cartilage changes is offered.

Prosthesis of the wrist-joint

Energy Technology Data Exchange (ETDEWEB)

Feldmeier, C.

1983-02-25

Function of the hand-joint and the well-being of patients can be severely affected by arthrosis of the wrist-joint. Therapeutically, arthrodesis usually results in a painfree status of stiffness. A painless and well functioning joint can be achieved by alloplastic joint replacement or resurfacing. The possibilities and clinical results in cases of arthrosis of the carpo-metacarpal joint of the thumb, pseudarthrosis of the scaphoid, aseptic necrosis of the Lunate and severe arthrosis of the radio-carpal joint are demonstrated.

Production and Distribution Research Center

Science.gov (United States)

1986-05-01

Steel, Coca Cola , Standard Oil of Ohio, and Martin Marietta have been involved in joint research with members of the Center. The number of Faculty...permitted the establishment of the Center and supports its continuing development. The Center has also received research sponsorship from the Joint...published relating to results developed within the PDRC under Offce of Naval Research sponsorship . These reports are listed in Appendix A. Many of these

Religion in the atheistic worldview (according to the materials of a qualitative research

Directory of Open Access Journals (Sweden)

Svetlana Malyavina

2014-10-01

Full Text Available The author presents an analysis of an empirical research concerning religion in the worldview of atheists, representatives of today’s youth. She focuses on the results obtained from studying their values and conceptions, emotional attitudes towards religion displayed by atheists and their behavior in religious context. The findings of the research have shown that the values that characterize the representatives of the group under study are subjective and nominative; that their conceptions of religion are characterized by superficiality and lack of system; that their emotional attitude can be defined as self-distancing and equanimity. The behavior of many atheists is predetermined by some kind of religious experience in the past, from which they would like to distance themselves. Among today’s young people, there are those who identify themselves as atheists, but their attitude towards religion is spontaneous and fragmentary, based on an experience of superficial religious enculturation.

[Short-term effectiveness of Swanson artificial joint replacement in treating posttraumatic metacarpophalangeal joint stiffness].

Science.gov (United States)

Lu, Hui; Shen, Xiangqian; Xu, Jihua; Huang, Xin; Ye, Po; Wu, Shoucheng

2011-11-01

To investigate the short-term effectiveness of Swanson artificial joint replacement in treating post-traumatic metacarpophalangeal joint stiffness. Between August 2007 and May 2010, 11 cases (13 fingers) of metacarpophalangeal joint stiffness with soft tissue defects underwent Swanson artificial joint replacement. There were 7 males (9 fingers) and 4 females (4 fingers), aged 43 to 65 years with an average of 49 years. The involved fingers included 4 thumbs, 4 index fingers, 3 middle fingers, and 2 ring fingers. The types of injury included open and crush injury in 8 fingers, fracture of the metacarpophalangeal joint in 3 fingers, metacarpophalangeal joint severing in 2 fingers. The time from joint stiffness to hospitalization was 12 to 48 weeks (mean, 24 weeks). The joint activity was (136.82 +/- 28.96) degrees. According to total active motion (TAM) assessment, included good in 1 finger, fair in 6 fingers, and poor in 6 fingers before operation. The activities of daily living were assessed by Sollerman score, which was 45.64 +/- 11.04. The X-ray films and CT scan showed traumatic arthritis of the metacarpophalangeal joint. The incision healed by first intention. All patients were followed up 12 to 34 months (mean, 24.1 months). At last follow-up, the joint activity was (194.64 +/- 28.86) degrees, showing significant difference when compared with preoperative value (t = 25.214, P = 0.000). According to TAM assessment, including excellent in 1 finger, good in 4 fingers, fair in 7 fingers, and poor in 1 finger. The Sollerman score was 67.45 +/- 8.20 postoperatively, showing significant difference when compared with the preoperative score (t = -10.470, P = 0.000). X-ray examination showed no prosthesis fracture, periprosthetic fracture, or joint dislocation occurred at last follow-up. Swanson artificial joint replacement can be applied to treat post-traumatic metacarpophalangeal joint stiffness, which can improve the joint activity and has satisfactory short

Effect of jointing work performed as an energy-saving measure

Energy Technology Data Exchange (ETDEWEB)

Brandt, A

1983-12-01

In order to establish the effect of replacing mortar joints by plastic or elastic sealants, an investigation of a number of multistory buildings has been carried out within the framework of the Danish Energy Research Programme EFP-81. An actual heat-saving effect could be established only in a few cases after replacement of windows and joints. The condition of the sealants was good after a few years of practical exposure. A surface cracking wich was not found to have any significant importance to the life of the joints was noted. The adhesion was good to tiles, wood and PVC. It was not possible to establish any decomposition of wooden windows owing to formation of condensate behind the tight seaplants placed at the outside, i.e. as a one-stage joint. It must be underlined that the investigation has only comprised brick built buildings.

Joint Space Narrowing in Patients With Pisotriquetral Osteoarthritis.

Science.gov (United States)

Ten Berg, Paul W L; Heeg, Erik; Strackee, Simon D; Streekstra, Geert J

2017-09-01

Patients with suspected pisotriquetral osteoarthritis may show joint space narrowing. However, the extent of joint space narrowing and its deviation from the joint space width (JSW) in normal anatomy is unknown. In this pathoanatomic study, we therefore compared the JSW in the pisotriquetral joint between osteoarthritic patient wrists and healthy wrists. We reviewed preoperative computed tomography (CT) scans of 8 wrists of patients with ulnar-sided wrist pain who underwent a pisiformectomy with confirmed pisotriquetral osteoarthritis at surgery. We also reviewed CT scans of 20 normal wrists from healthy volunteers serving as control group. Three-dimensional CT models of the pisiform and triquetrum were obtained from both affected and normal wrists, after which the minimum JSW was calculated in an automated fashion. In the patient group, the median (interquartile range) of the minimum JSW was 0.1 mm (0.0-0.2), and in the control group, 0.8 mm (0.3-0.9) ( P = .007). We showed that the pisotriquetral joint space in osteoarthritic patient wrists was significantly narrowed compared with healthy wrists. These results suggest that JSW evaluation has a potential diagnostic value in the work-up of patients with suspected pisotriquetral osteoarthritis. This is an interesting area for future clinical research, especially because no gold standard for diagnosing pisotriquetral osteoarthritis has been established yet.

Joint Removal Implications : Thermal Analysis and Life-Cycle Cost

Science.gov (United States)

2018-04-01

Deck joints are causing significant bridge deterioration and maintenance problems for Departments of Transportation (DOTs). Colorado State University researchers partnered with the Colorado DOT to analyze the effects of temperature change and thermal...

The Joint Space Operations Center Mission System and the Advanced Research, Collaboration, and Application Development Environment Status Update 2016

Science.gov (United States)

Murray-Krezan, Jeremy; Howard, Samantha; Sabol, Chris; Kim, Richard; Echeverry, Juan

2016-05-01

The Joint Space Operations Center (JSpOC) Mission System (JMS) is a service-oriented architecture (SOA) infrastructure with increased process automation and improved tools to enhance Space Situational Awareness (SSA) performed at the US-led JSpOC. The Advanced Research, Collaboration, and Application Development Environment (ARCADE) is a test-bed maintained and operated by the Air Force to (1) serve as a centralized test-bed for all research and development activities related to JMS applications, including algorithm development, data source exposure, service orchestration, and software services, and provide developers reciprocal access to relevant tools and data to accelerate technology development, (2) allow the JMS program to communicate user capability priorities and requirements to developers, (3) provide the JMS program with access to state-of-the-art research, development, and computing capabilities, and (4) support JMS Program Office-led market research efforts by identifying outstanding performers that are available to shepherd into the formal transition process. In this paper we will share with the international remote sensing community some of the recent JMS and ARCADE developments that may contribute to greater SSA at the JSpOC in the future, and share technical areas still in great need.

A Review of Natural Joint Systems and Numerical Investigation of Bio-Inspired GFRP-to-Steel Joints

Directory of Open Access Journals (Sweden)

Evangelos I. Avgoulas

2016-07-01

Full Text Available There are a great variety of joint types used in nature which can inspire engineering joints. In order to design such biomimetic joints, it is at first important to understand how biological joints work. A comprehensive literature review, considering natural joints from a mechanical point of view, was undertaken. This was used to develop a taxonomy based on the different methods/functions that nature successfully uses to attach dissimilar tissues. One of the key methods that nature uses to join dissimilar materials is a transitional zone of stiffness at the insertion site. This method was used to propose bio-inspired solutions with a transitional zone of stiffness at the joint site for several glass fibre reinforced plastic (GFRP to steel adhesively bonded joint configurations. The transition zone was used to reduce the material stiffness mismatch of the joint parts. A numerical finite element model was used to identify the optimum variation in material stiffness that minimises potential failure of the joint. The best bio-inspired joints showed a 118% increase of joint strength compared to the standard joints.

Prosthesis of the wrist-joint

International Nuclear Information System (INIS)

Feldmeier, C.

1983-01-01

Function of the hand-joint and the well-being of patients can be severely affected by arthrosis of the wrist-joint. Therapeutically, arthrodesis usually results in a painfree status of stiffness. A painless and well functioning joint can be achieved by alloplastic joint replacement or resurfacing. The possibilities and clinical results in cases of arthrosis of the carpo-metacarpal joint of the thumb, pseudarthrosis of the scaphoid, aseptic necrosis of the Lunate and severe arthrosis of the radio-carpal joint are demonstrated. (orig.) [de

15 CFR 295.25 - Special rule for the valuation of transfers between separately-owned joint venture members.

Science.gov (United States)

2010-01-01

... transfers between separately-owned joint venture members. 295.25 Section 295.25 Commerce and Foreign Trade...-Led Joint Research and Development Ventures § 295.25 Special rule for the valuation of transfers between separately-owned joint venture members. (a) Applicability. This section applies to transfers of...

FACTOR STRUCTURE OF FUNCTIONAL CAPABILITIES OF BODYBUILDERS

Directory of Open Access Journals (Sweden)

Predrag Milenović

2007-05-01

Full Text Available It is evident that researches in the fi eld of kineziology and sports sciences on the topic of body-building here are very rare mainly and probably because of its place in the system of hyerarchy of sports. Lack of interest in body-building and its insuffi cient popularization springs probably, among other things, from its different interpretation and, according to some people, from its ultimate goals which are not justifi ed by many. Others, experts from the fi eld of body-building, starting from the basic principles of its exercising point out its numerous positive characteristics and sides. Undoubtedly, characteristics of functional capabilities of sportspeople are specifi c for each sport or discipline. In body-building the functional sphere is bordered and defi ned by the nature of the sport’s activity itself, as well as by genetics and internal and external factors in a very complex training process of a bodu-builder. The goal of this research was determining the structure of the functional sphere of a body-builder. It was performed on the sample of 30 selected sportsmen, body-builders, of chronological age between 17 and 19 ( 6 months, members of the Sports' Club Strength ''Leskovac'', the Weight Lifters' Club '' Dubočica'' and the Body-building Club '' Dubočica'' from Leskovac. All the examiees have been submitted to training processes during a period longer than a year. For the purpose of determining the structure of the morphological sphere the Factor Analysis has been applied. Based on the data from the matrix of the Factor Structure the isolated factors can be interpreted in the following manner: The fi rst isolated factor in the sphere of applied functional variables is best defi ned by the variable of pulse under stress (FPUOP and the variable of maximum Oxygen consumption in liters per minute (FOLM. This isolated factor can be defi ned as a dimension of the transportation system of Oxygen. The second isolated factor in the

Elbow joint fatigue and bench-press training.

Science.gov (United States)

Huang, Yen-Po; Chou, You-Li; Chen, Feng-Chun; Wang, Rong-Tyai; Huang, Ming-Jer; Chou, Paul Pei-Hsi

2014-01-01

Bench-press exercises are among the most common form of training exercise for the upper extremity because they yield a notable improvement in both muscle strength and muscle endurance. The literature contains various investigations into the effects of different bench-press positions on the degree of muscle activation. However, the effects of fatigue on the muscular performance and kinetics of the elbow joint are not understood fully. To investigate the effects of fatigue on the kinetics and myodynamic performance of the elbow joint in bench-press training. Controlled laboratory study. Motion research laboratory. A total of 18 physically healthy male students (age = 19.6 ± 0.8 years, height = 168.7 ± 5.5 cm, mass = 69.6 ± 8.6 kg) participated in the investigation. All participants were right-hand dominant, and none had a history of upper extremity injuries or disorders. Participants performed bench-press training until fatigued. Maximal possible number of repetitions, cycle time, myodynamic decline rate, elbow-joint force, and elbow-joint moment. We observed a difference in cycle time in the initial (2.1 ± 0.42 seconds) and fatigue (2.58 ± 0.46 seconds) stages of the bench-press exercise (P = .04). As the participants fatigued, we observed an increase in the medial-lateral force (P = .03) and internal-external moment (P ≤ .04) acting on the elbow joint. Moreover, a reduction in the elbow muscle strength was observed in the elbow extension-flexion (P ≤ .003) and forearm supination-pronation (P ≤ .001) conditions. The results suggest that performing bench-press exercises to the point of fatigue increases elbow-joint loading and may further increase the risk of injury. Therefore, when clinicians design bench-press exercise regimens for general athletic training, muscle strengthening, or physical rehabilitation, they should control carefully the maximal number of repetitions.

Design of mechanical joints

CERN Document Server

Blake, Alexander

2018-01-01

A cornerstone publication that covers the basic principles and practical considerations of design methodology for joints held by rivets, bolts, weld seams, and adhesive materials, Design of Mechanical Joints gives engineers the practical results and formulas they need for the preliminary design of mechanical joints, combining the essential topics of joint mechanics...strength of materials...and fracture control to provide a complete treatment of problems pertinent to the field of mechanical connections.

Conceptualisation of speleogenesis in multi-storey artesian systems: a model of transverse speleogenesis.

Directory of Open Access Journals (Sweden)

Klimchouk Alexander

2005-07-01

Full Text Available Conceptual and respective quantitative models of speleogenesis/karstifi cation developed for unconfi ned aquifers do not adequately representspeleogenesis in confi ned settings. A conceptual model for speleogenesis in confi ned settings is suggested, based on views about hydrauliccontinuity in artesian basins and close cross-formation communication between aquifers in multi-storey artesian systems. Soluble unitssandwiched between insoluble porous/fi ssured formations (common aquifers initially serve as low permeability beds separating aquifersin a confi ned system. Conduits evolve as result of vertical hydraulic communication between aquifers across the soluble bed ("transversespeleogenesis". Recharge from the adjacent aquifer is dispersed and uniform, and fl ow paths across the soluble bed are rather short. There is a specific hydrogeologic mechanism inherent in artesian transverse speleogenesis (restricted input/output that suppresses the positive flow-dissolution feedback and hence speleogenetic competition in fissure networks, and accounts for the development of more pervasive channelling in confi ned settings, of maze patterns where appropriate structural prerequisites exist. This is the fundamental cause for the distinctions between cave morphologies evolving in unconfi ned and confi ned aquifers and for eventual distinctions of karstic permeability, storage characteristics and flow system behaviour between the two types of aquifers.Passage network density (the ratio of the cave length to the area of the cave fi eld, km/km2 and cave porosity (a fraction of the volume of a cave block, occupied by mapped cavities are roughly one order of magnitude greater in confi ned settings than in unconfined. Average areal coverage (a fraction of the area of the cave field occupied by passages in a plan view is about 5 times greater in confi ned settings. Conduit permeability in unconfi ned settings tends to be highly heterogeneous, whereas it is more

Joint research using small tokamaks

Czech Academy of Sciences Publication Activity Database

Gryaznevich, M.P.; Del Bosco, E.; Malaquias, A.; Mank, G.; Van Oost, G.; He, Yexi; Hegazy, H.; Hirose, A.; Hron, Martin; Kuteev, B.; Ludwig, G.O.; Nascimento, I.C.; Silva, C.; Vorobyev, G.M.

2005-01-01

Roč. 45, č. 10 (2005), S245-S254 ISSN 0029-5515. [Fusion Energy Conference contributions. Vilamoura, 1.11.2004-6.11.2004] Institutional research plan: CEZ:AV0Z20430508 Keywords : small tokamaks * thermonuclear fusion Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 3.418, year: 2005

Part I. Remembering No. 2 (Ladislav Loerinc). EMO joint venture, joint-stock company - really completely useless organ?

International Nuclear Information System (INIS)

Blaha, M.

2008-01-01

In this chapter author reviewed the story of the EMO joint venture, joint-stock company, between Slovenske elektrarne, a. s. and EdF. EMO joint venture, joint-stock company, was established to complete the Mochovce nuclear power plant. EMO joint venture, joint-stock company was closed after one year of work. History of EMO joint venture, joint-stock company, was described by its former general manager Mr. Ladislav Loerinc.

The treatment of nonpalpable PSA-detected adenocarcinoma of the prostate with 3-dimensional conformal radiation therapy

International Nuclear Information System (INIS)

Horwitz, Eric M.; Hanlon, Alexandra L.; Pinover, Wayne H.; Hanks, Gerald E.

1998-01-01

Purpose: We reviewed our institution's experience treating patients with nonpalpable PSA-detected prostate cancer with three-dimensional conformal radiation therapy (3DCRT) to determine prognostic factors that predict for biochemical-free survival (bNED) control and present the bNED control rates. Methods and Materials: Between May 1, 1990 and November 30, 1994, 160 patients with nonpalpable PSA-detected prostate cancer received 3DCRT at Fox Chase Cancer Center (median total dose 73 Gy; range: 67-78 Gy). bNED failure was defined as three consecutive increases in posttreatment PSA after achieving a nadir. bNED failure was recorded as the time midway between the nadir and the first consecutive rising PSA. Five-year actuarial rates of bNED control were calculated for pretreatment PSA (0-9.9 vs. 10-19.9 vs. ≥ 20 ng/ml), Gleason score (2-6 vs. 7-10), treatment field size (prostate vs. small pelvis), age ( 73 Gy) using Kaplan-Meier methods and compared using the Log rank test. The Cox model was used to multivariately establish independent predictors based on significant univariate factors. Median follow-up was 39 months (range: 2-84 months). Results: The 5-year actuarial rate of bNED control was 86% for the entire group of patients. The Cox Proportional Hazards model demonstrated that pretreatment PSA was an independent predictor of bNED control. Treatment field size was marginally predictive. There was no difference in bNED control when patients were stratified by the number of lobes positive for disease. Statistically different rates of bNED control were seen when the patients with nonpalpable disease were univariately compared to T2b and T2c patients. Three patients experienced Grade 3-4 genitourinary (GU) toxicity and 3 patients experienced Grade 3-4 gastrointestinal (GI) toxicity. Conclusions: Patients with nonpalpable PSA-detected prostate cancer can be effectively treated with 3DCRT with minimal morbidity and high rates of bNED control at 5 years. Pretreatment

EFFECT OF HEEL LIFTS ON PATELLOFEMORAL JOINT STRESS DURING RUNNING.

Science.gov (United States)

Mestelle, Zachary; Kernozek, Thomas; Adkins, Kelly S; Miller, Jessica; Gheidi, Naghmeh

2017-10-01

Patellofemoral pain is a debilitating injury for many recreational runners. Excessive patellofemoral joint stress may be the underlying source of pain and interventions often focus on ways to reduce patellofemoral joint stress. Heel lifts have been used as an intervention within Achilles tendon rehabilitation programs and to address leg length discrepancies. The purpose of this study was to examine the effect of running with heel lifts on patellofemoral joint stress, patellofemoral stress impulse, quadriceps force, step length, cadence, and other related kinematic and spatiotemporal variables. A repeated-measures research design. Sixteen healthy female runners completed five running trials in a controlled laboratory setting with and without 11mm heel lifts inserted in a standard running shoe. Kinetic and kinematic data were used in combination with a static optimization technique to estimate individual muscle forces. These data were inserted into a patellofemoral joint model which was used to estimate patellofemoral joint stress and other variables during running. When running with heel lifts, peak patellofemoral joint stress and patellofemoral stress impulse were reduced by a 4.2% (p=0.049) and 9.3% (p=0.002). Initial center of pressure was shifted anteriorly 9.1% when running with heel lifts (p0.05) were shown between conditions. Heel lift use resulted in decreased patellofemoral joint stress and impulse without associated changes in step length or frequency, or other variables shown to influence patellofemoral joint stress. The center of pressure at initial contact was also more anterior using heel lifts. The use of heel lifts may have therapeutic benefits for runners with patellofemoral pain if the primary goal is to reduce patellofemoral joint stress. 3b.

Effect of Strain Rate on Joint Strength and Failure Mode of Lead-Free Solder Joints

Science.gov (United States)

Lin, Jian; Lei, Yongping; Fu, Hanguang; Guo, Fu

2018-03-01

In surface mount technology, the Sn-3.0Ag-0.5Cu solder joint has a shorter impact lifetime than a traditional lead-tin solder joint. In order to improve the impact property of SnAgCu lead-free solder joints and identify the effect of silver content on tensile strength and impact property, impact experiments were conducted at various strain rates on three selected SnAgCu based solder joints. It was found that joint failure mainly occurred in the solder material with large plastic deformation under low strain rate, while joint failure occurred at the brittle intermetallic compound layer without any plastic deformation at a high strain rate. Joint strength increased with the silver content in SnAgCu alloys in static tensile tests, while the impact property of the solder joint decreased with increasing silver content. When the strain rate was low, plastic deformation occurred with failure and the tensile strength of the Sn-3.0Ag-0.5Cu solder joint was higher than that of Sn-0.3Ag-0.7Cu; when the strain rate was high, joint failure mainly occurred at the brittle interface layer and the Sn-0.3Ag-0.7Cu solder joint had a better impact resistance with a thinner intermetallic compound layer.

Forming a multinational joint venture

International Nuclear Information System (INIS)

Bhatia, N.K.; Garb, R.H.; Statton, T.D.

1990-01-01

This paper discusses the basis and mechanics for forming a multinational joint venture. The topics of the paper include the motivations for a joint venture, selection of the appropriate co-venturer, management of the multinational joint venture, and the joint venture agreement. The authors state that a joint venture is not applicable or desirable in all instances and to be successful, must be carefully planned

Achievement report for fiscal 1999. FS surveys to excavate international joint research seeds; 1999 nendo kokusai kyodo kenky seeds hakkutsu no tame no FS chosa seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The FS surveys to excavate international joint research seeds are intended to promote international joint researches, whereas surveys have been carried out in fiscal 1999 on eight themes covering as wide scope as new energies, resource conservation, energy conservation, environment preservation, functional materials, information communication technologies, and bio-technologies. The eight themes are: researches on energy conservation in petroleum and petrochemical industries by using advanced distillation processes (to develop an internal heat exchange type distillation column, and realize energy conservation exceeding the minimum reflux status being the limitation of conventional energy saving means), researches on treatment of hard-to-decompose chemical substances by utilizing surface reformation by means of discharge, a new process monitoring technology (process tomography), establishment of human immortalization cells due to co-manifestation of mortalin and telomerase and elucidation of their structure, a remote maintenance technology using integrated type sensors, application of new heat resistant plastics to photo and electronic materials, preparation processes of petroleum catalysts utilizing in situ XAFS, elucidation and design of the structure of the ultra-micro metal activation point in the reaction process, and surveys on necessity of developing a continuous and massive separation system of high-level energy and resource saving type using liquid-liquid distribution. (NEDO)

Joint imaging

International Nuclear Information System (INIS)

Hengst, W.

1984-01-01

Joint imaging is a proven diagnostic procedure which has become indispensable to the detection and treatment of different joint diseases in almost all disciplines. The method is suited for early diagnosis of joint affections both in soft tissue and bone which cannot be detected by X-ray or other procedures. The local activity accumulation depends on the rate of metabolism and is visualized in the scan, which in turn enables the extension and floridity of focal lesions to be evaluated and followed-up. Although joint scans may often give hints to probabilities relevant to differential diagnosis, the method is non-specific and only useful if based on the underlying clinical picture and X-ray finding, if possible. The radiation exposure is very low and does not represent a hazard in cases of adequate assessment of indication. In pregnant women and children the assessment of indication has to be based on very strict principles. The method is suited for out-patient diagnosis and can be applied in all installations equipped with a gamma camera and a technetium generator. (orig.) [de

Managing Joint Production Motivation

DEFF Research Database (Denmark)

Lindenberg, Siegwart; Foss, Nicolai Juul

2011-01-01

We contribute to the microfoundations of organizational performance by proffering the construct of joint production motivation. Under such motivational conditions individuals see themselves as part of a joint endeavor, each with his or her own roles and responsibilities; generate shared...... representations of actions and tasks; cognitively coordinate cooperation; and choose their own behaviors in terms of joint goals. Using goal-framing theory, we explain how motivation for joint production can be managed by cognitive/symbolic management and organizational design....

Lubrication of the human ankle joint in running

Czech Academy of Sciences Publication Activity Database

Hlaváček, Miroslav

2009-01-01

Roč. 3, č. 5 (2009), s. 619-626 ISSN 1970-8734 R&D Projects: GA ČR(CZ) GA103/07/0043 Institutional research plan: CEZ:AV0Z20710524 Keywords : human ankle joint * lubrication * running Subject RIV: JJ - Other Materials

Mechanics of Suture Joints

Science.gov (United States)

Li, Yaning; Song, Juha; Ortiz, Christine; Boyce, Mary; Ortiz Group/DMSE/MIT Team; Boyce Group/ME/MIT Team

2011-03-01

Biological sutures are joints which connect two stiff skeletal or skeletal-like components. These joints possess a wavy geometry with a thin organic layer providing adhesion. Examples of biological sutures include mammalian skulls, the pelvic assembly of the armored fish Gasterosteus aculeatus (the three-spined stickleback), and the suture joints in the shell of the red-eared slider turtle. Biological sutures allow for movement and compliance, control stress concentrations, transmit loads, reduce fatigue stress and absorb energy. In this investigation, the mechanics of the role of suture geometry in providing a naturally optimized joint is explored. In particular, analytical and numerical micromechanical models of the suture joint are constructed. The anisotropic mechanical stiffness and strength are studied as a function of suture wavelength, amplitude and the material properties of the skeletal and organic components, revealing key insights into the optimized nature of these ubiquitous natural joints.

Generalised joint hypermobility and knee joint hypermobility: prevalence, knee joint symptoms and health-related quality of life in a Danish adult population.

Science.gov (United States)

Junge, Tina; Henriksen, Peter; Hansen, Sebrina; Østengaard, Lasse; Golightly, Yvonne M; Juul-Kristensen, Birgit

2017-10-27

Several biomechanical factors, such as knee joint hypermobility (KJH), are suggested to play a role in the etiology of knee joint symptoms and knee osteoarthritis. Nevertheless, the prevalence or consequences of KJH solely or included in the classification of generalized joint hypermobility (GJHk) is unknown for a general population. Therefore, the objectives were to report the prevalence of self-reported GJHk and KJH, as well as the association of these conditions to knee joint symptoms, severity and duration of symptoms, and health-related quality of life (HRQoL) in a Danish adult population. This study is a cross-sectional population-based survey of 2056 Danish adults. Respondents received online questionnaires of GJHk and KJH, knee joint symptoms, the severity and duration of these, as well as HRQoL. Total response rate was 49% (n = 1006). The prevalence of self-reported GJHk and KJH was 13% and 23%, mostly representing women. More than half of the respondents with GJHk and KJH had knee joint symptoms. The odds for reporting knee joint symptoms, severity of knee joint symptoms and duration of knee joint symptoms were twice as high for respondents with GJHk and KJH. Respondents with GJHk and KJH reported lower HRQoL. GJHk and KJH were frequently reported in the Danish adult population, mostly in women. Respondents with GJHk and KJH were two times more likely to report knee joint-related symptoms such as pain, reduced performance of usual activity and lower HRQoL. The impact of these conditions on HRQoL is comparable with knee osteoarthritis. © 2017 Asia Pacific League of Associations for Rheumatology and John Wiley & Sons Australia, Ltd.

Joint Intentionality

Directory of Open Access Journals (Sweden)

Koreň Ladislav

2016-03-01

Full Text Available According to the shared intentionality hypothesis proposed by Michael Tomasello, two cognitive upgrades – joint and collective intentionality, respectively – make human thinking unique. Joint intentionality, in particular, is a mindset supposed to account for our early, species-specific capacity to participate in collaborative activities involving two (or a few agents. In order to elucidate such activities and their proximate cognitive-motivational mechanism, Tomasello draws on philosophical accounts of shared intentionality. I argue that his deference to such cognitively demanding accounts of shared intentional activities is problematic if his theoretical ambition is in part to show that and how early (prelinguistic and precultural capacities for joint action contribute to the development of higher cognitive capacities.

Family joint activities in a cross-national perspective

Directory of Open Access Journals (Sweden)

Kuntsche Emmanuel

2007-05-01

Full Text Available Abstract Background Parents and children joint activities are considered to be an important factor on healthy lifestyle development throughout adolescence. This study is a part of the Cross-National Survey on Health Behaviour in School-aged Children – World Health Organization Collaborative Study (HBSC. It aims to describe family time in joint activities and to clarify the role of social and structural family profile in a cross-national perspective. Methods The research was carried out according to the methodology of the HBSC study using the anonymous standardized questionnaire. In total, 17,761 students (8,649 boys and 9,112 girls aged 13 and 15 years from 6 European countries (Czech Republic, Finland, Greenland, Lithuania, Spain, and Ukraine were surveyed in the 2001–2002 school-year. The evaluation of joint family activity is based on 8 items: (1 watching TV or a video, (2 playing indoor games, (3 eating meals, (4 going for a walk, (5 going places, (6 visiting friends or relatives, (7 playing sports, (8 sitting and talking about things (chatting. Results Students from Spain and Ukraine reported spending the most time together with their families in almost all kinds of joint activities, whereas students from Greenland and Finland reported spending the least of this time. Boys were more likely than girls to be spending time together with family. Joint family activity goes into decline in age from 13 to 15 years. Variability of family time in a cross-national perspective was relatively small and related to children age category. Considering national, gender and age differences of studied population groups, we found that the distribution of joint family activities tends to be dispersed significantly by family structure (intact/restructured family and family wealth. Conclusion Our study compares children and parent joint activities in European countries and reveals differences and similarities in these patterns between countries. The findings

Family joint activities in a cross-national perspective.

Science.gov (United States)

Zaborskis, Apolinaras; Zemaitiene, Nida; Borup, Ina; Kuntsche, Emmanuel; Moreno, Carmen

2007-05-30

Parents and children joint activities are considered to be an important factor on healthy lifestyle development throughout adolescence. This study is a part of the Cross-National Survey on Health Behaviour in School-aged Children--World Health Organization Collaborative Study (HBSC). It aims to describe family time in joint activities and to clarify the role of social and structural family profile in a cross-national perspective. The research was carried out according to the methodology of the HBSC study using the anonymous standardized questionnaire. In total, 17,761 students (8,649 boys and 9,112 girls) aged 13 and 15 years from 6 European countries (Czech Republic, Finland, Greenland, Lithuania, Spain, and Ukraine) were surveyed in the 2001-2002 school-year. The evaluation of joint family activity is based on 8 items: (1) watching TV or a video, (2) playing indoor games, (3) eating meals, (4) going for a walk, (5) going places, (6) visiting friends or relatives, (7) playing sports, (8) sitting and talking about things (chatting). Students from Spain and Ukraine reported spending the most time together with their families in almost all kinds of joint activities, whereas students from Greenland and Finland reported spending the least of this time. Boys were more likely than girls to be spending time together with family. Joint family activity goes into decline in age from 13 to 15 years. Variability of family time in a cross-national perspective was relatively small and related to children age category. Considering national, gender and age differences of studied population groups, we found that the distribution of joint family activities tends to be dispersed significantly by family structure (intact/restructured family) and family wealth. Our study compares children and parent joint activities in European countries and reveals differences and similarities in these patterns between countries. The findings underline the role of family structure (intact

The joint essential numerical range, compact perturbations, and the Olsen problem

Czech Academy of Sciences Publication Activity Database

Müller, Vladimír

2010-01-01

Roč. 197, č. 3 (2010), s. 275-290 ISSN 0039-3223 R&D Projects: GA ČR GA201/09/0473; GA AV ČR IAA100190903 Institutional research plan: CEZ:AV0Z10190503 Keywords : joint essential numerical range * joint numerical range * compact perturbation * Olsen's problem Subject RIV: BA - General Mathematics Impact factor: 0.567, year: 2010 http://journals.impan.pl/cgi-bin/doi?sm197-3-5

Andragogy And Pedagogy Theories Of Learning In Joint Professional Military Education

Science.gov (United States)

2015-09-27

needs of joint military leaders. This research examines each theory and its fundamental design in an attempt to determine if pedagogy alone can meet... Abraham H. Maslow , known largely for his studies in motivation and personality, saw the goal of learning to be self-actualization, or a person’s...AU/ACSC/MCMAHON, S/AY16 AIR COMMAND AND STAFF COLLEGE AIR UNIVERSITY ANDRAGOGY AND PEDAGOGY THEORIES OF LEARNING IN JOINT PROFESSIONAL

Resolution on the problems and prospects of common research policy

International Nuclear Information System (INIS)

1982-01-01

The European Parliament sets priorities for future research policy; it supports e.g.: the Europeanization of large-scale research because it shall facilitate the combination of the research and financing potential. It also secures a wide adaptation of the knowledge achieved by the joint financial efforts of all member states. The demander made for a joint research project are: that the next programme for several years of the joint research project may launch its position and special qualification as a safety research centre for industrial activities of high risks (nuclear energy sector, chemistry, biology) and that the joint research project may be organized as independently as possible. Moreover, the European Parliament demands that the member states increase their research budgets to at least 2.5% of the gross national product. (orig./HSCH) [de

The temporomandibular joint

International Nuclear Information System (INIS)

Campbell, W.

1984-01-01

Whilst the temporomandibular joint is in many ways unique, it is subject to all the diseases and disorders found in joints in other parts of the human skeleton. By far the most common disorder is injury, followed by arthropathy, acute and chronic dislocations, ankylosis, and in rare instances, neoplasms. The diagnosis and management of the temporomandibular joint are the primary responsibility of the oral surgeon. Nevertheless, this anatomical region is an area in which the cooperation of medical and dental disciplines may be required for the satisfactory conclusion of treatment. The more so when the disease process involves either associated psychosomatic illness or malignancy. The mainstay of the diagnosis is a careful radiological examination of the joint. There exists a delicate relationship between the dentition, the muscles of mastication, and the temporomandibular articulation, which is controlled by arthrokinetic reflex activity of the branches of the 5th cranial nerve. Imbalance between one or more of the components of this integrated system frequently leads to disturbances in function. Pain-dysfunction disorders constitute the larger part of temporomandibular joint disturbances generally encountered

An examination of the relationship between binge eating disorder and insomnia symptoms.

Science.gov (United States)

Kenny, Therese E; Van Wijk, Megan; Singleton, Christopher; Carter, Jacqueline C

2018-05-01

Although studies on sleep difficulties in binge eating disorder (BED) have produced inconsistent findings, research has linked poor sleep to the presence of related concerns (e.g., obesity, anxiety, and depression). To clarify the relationship between BED and sleep problems, this study aimed to compare insomnia symptoms in individuals with BED and those with no history of an eating disorder (NED). An adult community sample of individuals with BED (N = 68) and NED (N = 78) completed measures of insomnia, depression and anxiety, and eating disorder symptoms. Individuals with BED reported significantly greater insomnia symptoms than the NED group. The relationship between BED and insomnia symptoms was partially mediated by anxiety. Depression fully mediated the positive association between insomnia symptom severity and binge frequency in the BED group. These findings suggest that depression, anxiety, and sleep are important constructs to consider in BED development and presentation. Copyright © 2018 John Wiley & Sons, Ltd and Eating Disorders Association.

Proceedings of 2008 KAERI/JAEA joint seminar on advanced irradiation and PIE technologies

International Nuclear Information System (INIS)

Ryu, Woo-Seog; Ishihara, Masahiro

2008-12-01

Under the Arrangement for Cooperation in the field of peaceful uses of Nuclear Energy between the Korea Atomic Energy Research Institute (KAERI) and the Japan Atomic Energy Agency (JAEA), the 2008 KAERI-JAEA Joint Seminar on Advanced Irradiation and PIE (post-irradiation examination) Technologies has been held at KAERI in Daejeon, Korea, from November 5 to 7, 2008. This seminar was organized by the PIE and Radwaste Division, Research Reactor Engineering Division, and HANARO Management Division in KAERI. It was also the first time to hold the seminar under the agreement signed September 4, 2008. This triennial seminar is the sixth in series of bilateral exchange of irradiation technologies. Since the first joint seminar on Post Irradiation Examination Technology between JAERI and KAERI held at JAERI Oarai center, Japan in 1992, it has been a good model of international cooperation program between KAERI and JAEA in the field of neutron irradiation uses. At the fifth seminar in 2005, irradiation technology field was included to the joint seminar, moreover in this time it is expanded to the research reactor management field for covering whole areas of irradiation using in research reactors. The seminar was divided into three technical sessions; the sessions addressed the general topics of 'research reactor management', 'advanced irradiation technology' and 'post-irradiation examination technology'. Total 46 presentations were made, and active information exchange was done among participants. This proceeding is containing the papers or manuscripts presented in the 2008 KAERI-JAEA Joint Seminar on Advanced Irradiation and PIE Technologies. The 46 of the presented papers indexed individually. (J.P.N.)

The Texts of the Instruments relating to a Project for a Joint Agency-Norwegian Program of Research with the Zero Power Reactor 'NORA'

Energy Technology Data Exchange (ETDEWEB)

NONE

1961-06-22

The text of the Supply Agreement between the Agency and the Governments of Norway and of the United States of America, and the text of the related Project Agreement between the Agency and the Government of Norway concerning an Agency project for cooperation in carrying out a joint program of research in reactor physics with the zero power reactor 'NORA', are reproduced in this document for the information of all Members of the Agency.

The Texts of the Instruments relating to a Project for a Joint Agency-Norwegian Program of Research with the Zero Power Reactor 'NORA'

International Nuclear Information System (INIS)

1961-01-01

The text of the Supply Agreement between the Agency and the Governments of Norway and of the United States of America, and the text of the related Project Agreement between the Agency and the Government of Norway concerning an Agency project for cooperation in carrying out a joint program of research in reactor physics with the zero power reactor 'NORA', are reproduced in this document for the information of all Members of the Agency

Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review

Science.gov (United States)

Wanare, S. P.; Kalyankar, V. D.

2018-04-01

Friction stir welding is emerging as a promising technique for joining of lighter metal alloys due to its several advantages over conventional fusion welding processes such as low thermal distortion, good mechanical properties, fine weld joint microstructure, etc. This review article mainly focuses on analysis of microstructure and mechanical properties of friction stir welded joints. Various microstructure characterization techniques used by previous researchers such as optical microscopes, x-ray diffraction, electron probe microscope, transmission electron microscope, scanning electron microscopes with electron back scattered diffraction, electron dispersive microscopy, etc. are thoroughly overviewed and their results are discussed. The effects of friction stir welding process parameters such as tool rotational speed, welding speed, tool plunge depth, axial force, tool shoulder diameter to tool pin diameter ratio, tool geometry etc. on microstructure and mechanical properties of welded joints are studied and critical observations are noted down. The microstructure examination carried out by previous researchers on various zones of welded joints such as weld zone, heat affected zone and base metal are studied and critical remarks have been presented. Mechanical performances of friction stir welded joints based on tensile test, micro-hardness test, etc. are discussed. This article includes exhaustive literature review of standard research articles which may become ready information for subsequent researchers to establish their line of action.

Benign joint hypermobility syndrome

Directory of Open Access Journals (Sweden)

Iwona Słowińska

2014-11-01

Full Text Available Benign joint hypermobility syndrome (BJHS, commonly known as loose ligament syndrome, is a non-inflammatory rheumatic condition. It is characterised by a greater than normal range of motion of the joints of the limbs and spine. The prevalence of the syndrome in preschool-age children is estimated to be between 2% and 30%, depending on ethnic background (with higher prevalence in Asian and African populations, occurring most often in families with a history of the condition and more frequently in girls. This paper presents a case report of a 12-year-old girl. A broad differential diagnostic approach to recurrent joint inflammation with joint effusion and pain made it possible to establish a diagnosis of benign joint hypermobility syndrome. The child met the Brighton criteria; her Beighton score was 7 out of 9. Patient education aimed at eliminating abnormal joint movement and an appropriate rehabilitation programme play key roles in the treatment of BJHS.

European and Americas Committees for Treatment and Research in Multiple Sclerosis (ECTRIMS/ACTRIMS) - 7th Joint Triennial Congress (October 25-28, 2017 - Paris, France).

Science.gov (United States)

Díaz, N

2017-10-01

The 7th Triennial Joint conference of the European Committee for Treatment and Research in Multiple Sclerosis (ECTRIMS) and Americas Committee for Treatment and Research in Multiple Sclerosis (ACTRIMS) was held in Paris, France. The meeting brought together attendees from a wide range of disciplines involved in multiple sclerosis (MS) research to explore an extensive program of teaching courses, plenary lectures, oral and poster sessions from approximately 2,000 abstracts submitted, and hot topic and young investigator presentations. These presentations covered topics including diagnostics, therapeutics and biomarkers, as well as a special section for MS nurses. Industry-sponsored symposia were also held. The report from this conference covers the latest developments in MS treatments.

Research design

NARCIS (Netherlands)

Tobi, Hilde; Kampen, Jarl K.

2018-01-01

Many of today’s global scientific challenges require the joint involvement of researchers from different disciplinary backgrounds (social sciences, environmental sciences, climatology, medicine, etc.). Such interdisciplinary research teams face many challenges resulting from differences in training

Principles of Antibiotic Prophylaxis in Total Joint Arthroplasty: Current Concepts.

Science.gov (United States)

Bosco, Joseph A; Bookman, Jared; Slover, James; Edusei, Emmanuel; Levine, Brett

2015-08-01

Infection is a rare, serious complication following total joint arthroplasty and constitutes a considerable emotional and financial burden for patients, surgeons, and healthcare systems. Prevention of surgical site and periprosthetic joint infections is crucial. This requires knowledge of the microorganisms that commonly cause these infections, including Staphylococcus species. Selection of the appropriate antibiotic regimen to treat infection remains controversial, but cefazolin and cefuroxime are the most commonly recommended antibiotics for prophylaxis. Appropriate timing of administration before surgery, with redosing performed as needed, can help to ensure optimal antibiotic concentration during surgery. Given the increasing evidence that S aureus colonization is a risk factor for periprosthetic joint infection, an exploration of the potential benefits of preoperative S aureus carrier screening and decolonization protocols is warranted. The use of antibiotic-loaded bone cement in primary total joint arthroplasty and antibiotic powder at wound closure are other controversial topics that require additional research. Copyright 2015 by the American Academy of Orthopaedic Surgeons.

Joint homeostasis in tissue engineering for cartilage repair

NARCIS (Netherlands)

Saris, D.B.F.

2002-01-01

Traumatic joint damage, articular cartilage and the research into methods of restoring the articulation are not new topics of interest. For centuries, clinicians have recognized the importance of cartilage damage and sought ways of learning about the normal form and function of hyaline cartilage as

An evaluation of charity care for tax-exempt hospitals engaging in joint ventures.

Science.gov (United States)

Smith, Pamela C

2006-01-01

The study examines whether the level of charity care and financial stability contribute to a nonprofit hospital's motivation for partnering with a for-profit hospital through a joint venture. The Internal Revenue Service (IRS) has heightened its scrutiny of joint ventures within the health care sector. Considering recent calls to investigate the merit of the tax-exempt status of hospitals engaged in joint ventures, this research will assist policy makers in the evaluation of nonprofit hospitals. Constituents will continue to question whether joint ventures contribute to a reduced focus on charitable activities. Results indicate that the propensity to engage in a joint venture significantly increases with increased levels of charity care. Furthermore, nonprofit hospitals with lower profitability are more likely to engage in joint ventures. These results are useful to policy makers when evaluating the level of charity care provided by hospitals seeking alternative strategic alliances. Considering many critics allege hospitals are reducing the provision of charity care to the community, it is imperative for management to be conscious of the impact of joint ventures on the provision of charity care.

CONTACT SURFACES OF BIG JOINTS – SITES OF THE DEVELOPMENT OF LIMIT STATES AND OTHER CONSIDERATIONS

Czech Academy of Sciences Publication Activity Database

Fuis, Vladimír; Janíček, P.; Hlavoň, Pavel

2008-01-01

Roč. 15, č. 5 (2008), s. 381-388 ISSN 1802-1484 Institutional research plan: CEZ:AV0Z20760514 Keywords : biomechanics * big joints * contact pressure * pathological joints * system approach Subject RIV: BO - Biophysics

Quality Assessment of Scarf Joints Considering the Acoustic Parameters: A Nondestructive Approach

Directory of Open Access Journals (Sweden)

Ali Yavari

2015-07-01

Full Text Available The present research studied the acoustic properties of 40 oak timber samples (Quercus castaneifolia: the acoustic coefficient (K and acoustic conversion efficiency (ACE in free vibration mode, using the free-free bar method with different planes of vibration, i.e., tangential (LT and radial (LR. These acoustic parameters were considered for both primary virgin wooden beams and modified beams carrying a single scarf joint in four different bonding angles (60°, 65°, 70°, and 75°, individually glued with two different adhesives (isocyanate and polyvinyl acetate. Comparing the acoustic properties of primary solid beams with scarf jointed beams of oak wood in LT and LR planes, the steeper joint angles of 70° and 75° did not result in any serious changes with polyvinyl acetate adhesive. Scarf-jointed beams with smaller joint angles (60° and 65° had significant effect on the acoustic properties relative to larger angles. Thus, beams having larger joint angles and beams glued using polyvinyl acetate may have enhanced acoustic properties.

Sacroiliac joint dysfunction.

Science.gov (United States)

Ilaslan, Hakan; Arslan, Ahmet; Koç, Omer Nadir; Dalkiliç, Turker; Naderi, Sait

2010-07-01

Sacroiliac joint dysfunction is a disorder presenting with low back and groin pain. It should be taken into consideration during the preoperative differential diagnosis of lumbar disc herniation, lumbar spinal stenosis and facet syndrome. Four cases with sacroiliac dysfunction are presented. The clinical and radiological signs supported the evidence of sacroiliac dysfunction, and exact diagnosis was made after positive response to sacroiliac joint block. A percutaneous sacroiliac fixation provided pain relief in all cases. The mean VAS scores reduced from 8.2 to 2.2. It is concluded that sacroiliac joint dysfunction diagnosis requires a careful physical examination of the sacroiliac joints in all cases with low back and groin pain. The diagnosis is made based on positive response to the sacroiliac block. Sacroiliac fixation was found to be effective in carefully selected cases.

Metallic joints for very high vacuum; Joints metalliques pour ultra-vide

Energy Technology Data Exchange (ETDEWEB)

Paigne, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1961-07-01

After defining three main types of joint; three types of distribution of the tightening force in the clamps are demonstrated; the distribution of stresses, distortion and displacements in these clamps is then calculated by means of the theory of elasticity. This is followed by experimental results on a particular means of tightening (i.e. screw-clamps). From a brief discussion on the behaviour of the clamps it is possible finally to define other types of joint deriving from the main types originally foreseen. (author) [French] Apres avoir defini trois principaux types de joints, on met en evidence trois types de distribution des forces de serrage des brides; puis on calcule a l'aide de la theorie de l'elasticite la distribution des contraintes, deformations et deplacements dans ces brides. On donne ensuite des resultats experimentaux sur un mode de serrage particulier (cas des serres-joints). Une discussion sommaire sur le comportement des brides permet de definir finalement d'autres types de joints derivant des types principaux envisages initialement. (auteur)

An analysis of National Health Service Trust websites on the occupational backgrounds of 'Non-Executive Directors' on England's Acute Trusts.

Science.gov (United States)

Pritchard, Colin; Harding, Andrew Je

2014-05-01

To explore the occupational backgrounds of English Non-Executive Directors (NED) on Acute National Health Service (NHS) Trusts. Data extrapolated from Trust websites of NED' occupational backgrounds by gender and occupations, and inter-rater reliability test undertaken. Data were available on all but 24 of the 166 Acute Trusts' from all regions. Trust Chairs and NED were categorised by their dominant occupation. Differentiating NED with and without health or social care leadership experience. The ratings of NED' occupations positively correlated (p business' (Francis, 2013) rather than developing a more patient-centred, clinically led and integrated NHS? It is suggested that Boards need more NED with health and social care leadership experience and methods to identify the 'patient's agenda' to create 'a common culture' that places 'patients at the centre of everything we do' (Hunt, 2012). A key context for Trust Boards operations is funding, which Francis' terms of reference excluded, an issue that is briefly discussed.

Acromioclavicular joint separation

Directory of Open Access Journals (Sweden)

Devan Pandya, BS

2018-04-01

Full Text Available History of present illness: A 30-year-old male was brought in by ambulance to the emergency department as a trauma activation after a motorcycle accident. The patient was the helmeted rider of a motorcycle traveling at an unknown speed when he lost control and was thrown off his vehicle. He denied loss of consciousness, nausea, or vomiting. The patient’s vital signs were stable and his only complaint was pain around his left shoulder. On exam, the patient had a prominent left clavicle without skin compromise. He had adequate range of motion in the left shoulder with moderate pain, and his left upper extremity was neurovascularly intact. Significant findings: Plain films of the left shoulder showed elevation of the left clavicle above the acromion. There was an increase in the acromioclavicular (AC and coracoclavicular (CC distances (increased joint distances marked with red and blue arrows, respectively. A normal AC joint measures 1-3 mm whereas a normal CC distance measures 11-13 mm.1 The injury was classified as a Rockwood type III AC joint separation. Discussion: The AC joint is a synovial joint between an oval facet on the acromion and a similar facet on the distal end of the clavicle. Horizontal stability is provided by the AC joint while axial stability is provided by the CC joint.2,3 AC joint injuries account for about 9%-12% of shoulder girdle injuries, and the most common mechanism is direct trauma.4,5 Initial evaluation with imaging includes plain films with three views: the anterior-posterior (AP view with the shoulder in internal and external rotation as well as an axillary, or scapula-Y view (sensitivity 40%, specificity 90% for all films.6,7 AC joint injuries are classified by the Rockwood system.8 Type I involves a sprain or incomplete tear of the AC ligaments with an intact CC ligament. The AC joint appears normal on X-ray, but can become widened with stress, achieved by having the patient hold a 10-15 pound weight from each

Hip joint injection

Science.gov (United States)

... medicine into the joint. The provider uses a real-time x-ray (fluoroscopy) to see where to place ... Wakefield RJ. Arthrocentesis and injection of joints and soft tissue. In: Firestein GS, Budd RC, Gabriel SE, ...

Model Test Research on the End Bearing Behavior of the Large-Diameter Cast-in-Place Concrete Pile for Jointed Rock Mass

Directory of Open Access Journals (Sweden)

Jingwei Cai

2016-01-01

Full Text Available For large-diameter, cast-in-place concrete piles, the end bearing capacity of a single pile is affected by discontinuous surfaces that exist in natural rock masses when the bearing layer of the pile end is located in the rock layer. In order to study the influence of the jointed dip angle on the bearing characteristics of the pile end, the discrete element models are adopted to simulate the mechanical characteristics of the jointed rock masses, and the model tests of the failure mode of the jointed rock masses were also designed. The results of the numerical calculations and modeling tests show that the joints, which have a filtering effect on the internal stress of the bedrock located at the pile end, change the load transferring paths. And the failure mode of the jointed rock foundation also changes as jointed dip angle changes. The rock located at the pile end generally presents a wedge failure mode. In addition, the Q-S curves obtained by model tests show that the ultimate end bearing capacity of a single pile is influenced by the jointed dip angle. The above results provide an important theoretical basis for how to correctly calculate end resistance for a cast-in-place concrete pile.

Study on Reduced-Moderation Water Reactor (RMWR) core design. Joint research report (FY1998-1999)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

The Reduce-Moderation Water Reactor (RMWR) is a next generation water-cooled reactor aiming at effective utilization of uranium resource, high burn-up and long operation cycle, and plutonium multi-recycle. Japan Atomic Energy Research Institute (JAERI) started a joint research program for conceptual design of RMWR core in collaboration with the Japan Atomic Power Company (JAPC) since 1998. The research area includes the RMWR core conceptual designs, development of analysis methods for rector physics and thermal-hydraulics to design the RMWR cores with higher accuracy and preparation of MOX critical experiment to confirm the feasibility from the reactor physics point of view. The present report describes the results of joint research program 'RMWR core design Phase 1' performed by JAERI and JAPC in FY 1998 and 1999. The results obtained from the joint research program are as follows: Conceptual design study on the RMWR core has been performed. A core concept with a conversion ratio more than about 1 is basically feasible to multiple recycling of plutonium. Investigating core characteristics at the equilibrium, some promising core concepts to satisfy above aims have been established. As for BWR-type concepts with negative void reactivity coefficients, three types of design have been obtained as follows; (1) one feasible to attain high conversion ratio about 1.1, (2) one feasible to attain operation cycle of about 2 years and burn-up of about 60 GWd/t with conversion ratio more than 1 or (3) one in simple design based on the ABWR assembly and without blanket attaining conversion ratio more than 1. And as for PWR-type concepts with negative void reactivity coefficients, two types of design have been obtained as follows; (1) one feasible to attain high conversion ratio about 1.05 by using heavy water as a coolant and (2) one feasible to attain conversion ratio about l by using light water. In the study of nuclear calculation method, a reactor analysis code

Design of a Virtual Player for Joint Improvisation with Humans in the Mirror Game.

Science.gov (United States)

Zhai, Chao; Alderisio, Francesco; Słowiński, Piotr; Tsaneva-Atanasova, Krasimira; di Bernardo, Mario

2016-01-01

Joint improvisation is often observed among humans performing joint action tasks. Exploring the underlying cognitive and neural mechanisms behind the emergence of joint improvisation is an open research challenge. This paper investigates jointly improvised movements between two participants in the mirror game, a paradigmatic joint task example. First, experiments involving movement coordination of different dyads of human players are performed in order to build a human benchmark. No designation of leader and follower is given beforehand. We find that joint improvisation is characterized by the lack of a leader and high levels of movement synchronization. Then, a theoretical model is proposed to capture some features of their interaction, and a set of experiments is carried out to test and validate the model ability to reproduce the experimental observations. Furthermore, the model is used to drive a computer avatar able to successfully improvise joint motion with a human participant in real time. Finally, a convergence analysis of the proposed model is carried out to confirm its ability to reproduce joint movements between the participants.

Timber joints under long-term loading

DEFF Research Database (Denmark)

Feldborg, T.; Johansen, M.

This report describes tests and results from stiffness and strength testing of splice joints under long-term loading. During two years of loading the spicimens were exposed to cyclically changing relative humidity. After the loading period the specimens were short-term tested. The connectors were...... integral nail-plates and nailed steel and plywood gussets. The report is intended for designers and researchers in timber engineering....

Finite element analysis of dovetail joint made with the use of CNC technology

Directory of Open Access Journals (Sweden)

Václav Sebera

2010-01-01

Full Text Available The objective of the paper is the parametrization and the finite element analysis of mechanical pro­per­ties of a through dovetail joint made with the use of a specific procedure by a 3-axis CNC machine. This corner joint was used for the simulation of the bending load of the joint in the angle plane – by compression, i.e. by pressing the joint together. The deformation fields, the stress distribution, the stiffness and the bending moment of the joints were evaluated. The finite element system ANSYS was used to create two parametric numerical models of the joint. The first one represents an ideal­ly stiff joint – both joint parts have been glued together. The second model includes the contact between the joined parts. This numerical model was used to monitor the response of the joint stiffness to the change of the static friction coefficient. The results of both models were compared both with each other and with similar analyses conducted within the research into ready-to-assemble furniture joints. The results can be employed in the designing of more complex furniture products with higher demands concerning stiffness characteristics, such as furniture for sitting. However, this assumption depends on the correction of the created parametric models by experimental testing.

Towards Scalable Strain Gauge-Based Joint Torque Sensors

Science.gov (United States)

D’Imperio, Mariapaola; Cannella, Ferdinando; Caldwell, Darwin G.; Cuschieri, Alfred

2017-01-01

During recent decades, strain gauge-based joint torque sensors have been commonly used to provide high-fidelity torque measurements in robotics. Although measurement of joint torque/force is often required in engineering research and development, the gluing and wiring of strain gauges used as torque sensors pose difficulties during integration within the restricted space available in small joints. The problem is compounded by the need for a scalable geometric design to measure joint torque. In this communication, we describe a novel design of a strain gauge-based mono-axial torque sensor referred to as square-cut torque sensor (SCTS), the significant features of which are high degree of linearity, symmetry, and high scalability in terms of both size and measuring range. Most importantly, SCTS provides easy access for gluing and wiring of the strain gauges on sensor surface despite the limited available space. We demonstrated that the SCTS was better in terms of symmetry (clockwise and counterclockwise rotation) and more linear. These capabilities have been shown through finite element modeling (ANSYS) confirmed by observed data obtained by load testing experiments. The high performance of SCTS was confirmed by studies involving changes in size, material and/or wings width and thickness. Finally, we demonstrated that the SCTS can be successfully implementation inside the hip joints of miniaturized hydraulically actuated quadruped robot-MiniHyQ. This communication is based on work presented at the 18th International Conference on Climbing and Walking Robots (CLAWAR). PMID:28820446

Research on compliance coefficient calculation for heterogeneity material bolted joints of reactor internal

International Nuclear Information System (INIS)

Li Qing; Ren Xin; Zhang Kangda

2009-01-01

Using the finite element method, calculation and test are conducted on the bolted joints of four different diameters, and the existing calculation method for bolt compliance coefficient is analyzed. The results indicate that the calculated and test results by finite element method are agreed well, and value D/t f and β have a linear relation. (authors)

Parameter identification for joint elements in a revolute-joint detector manipulator

International Nuclear Information System (INIS)

Preissner, C.; Shu, D.; Royston, T.

2005-01-01

A revolute-joint robot is being developed for the spatial positioning of an x-ray detector at the Advanced Photon Source. Commercially available revolute-joint manipulators do not meet our size, positioning, or payload specifications. One idea being considered is the modification of a commercially available robot, with the goal of improving the repeatability and trajectory accuracy. Theoretical, computational, and experimental procedures are being used to (1) identify, (2) simulate the dynamics of an existing robot system using a multibody approach, and eventually (3) design an improved version, with low dynamic positioning uncertainty. A key aspect of the modeling and performance prediction is accurate stiffness and damping values for the robot joints. This paper discusses the experimental identification of the stiffness and damping parameters for one robot harmonic drive joint

National Elevation Dataset

Science.gov (United States)

,

2002-01-01

The National Elevation Dataset (NED) is a new raster product assembled by the U.S. Geological Survey. NED is designed to provide National elevation data in a seamless form with a consistent datum, elevation unit, and projection. Data corrections were made in the NED assembly process to minimize artifacts, perform edge matching, and fill sliver areas of missing data. NED has a resolution of one arc-second (approximately 30 meters) for the conterminous United States, Hawaii, Puerto Rico and the island territories and a resolution of two arc-seconds for Alaska. NED data sources have a variety of elevation units, horizontal datums, and map projections. In the NED assembly process the elevation values are converted to decimal meters as a consistent unit of measure, NAD83 is consistently used as horizontal datum, and all the data are recast in a geographic projection. Older DEM's produced by methods that are now obsolete have been filtered during the NED assembly process to minimize artifacts that are commonly found in data produced by these methods. Artifact removal greatly improves the quality of the slope, shaded-relief, and synthetic drainage information that can be derived from the elevation data. Figure 2 illustrates the results of this artifact removal filtering. NED processing also includes steps to adjust values where adjacent DEM's do not match well, and to fill sliver areas of missing data between DEM's. These processing steps ensure that NED has no void areas and artificial discontinuities have been minimized. The artifact removal filtering process does not eliminate all of the artifacts. In areas where the only available DEM is produced by older methods, then "striping" may still occur.

Joint contact loading in forefoot and rearfoot strike patterns during running.

Science.gov (United States)

Rooney, Brandon D; Derrick, Timothy R

2013-09-03

Research concerning forefoot strike pattern (FFS) versus rearfoot strike pattern (RFS) running has focused on the ground reaction force even though internal joint contact forces are a more direct measure of the loads responsible for injury. The main purpose of this study was to determine the internal loading of the joints for each strike pattern. A secondary purpose was to determine if converted FFS and RFS runners can adequately represent habitual runners with regards to the internal joint loading. Using inverse dynamics to calculate the net joint moments and reaction forces and optimization techniques to estimate muscle forces, we determined the axial compressive loading at the ankle, knee, and hip. Subjects consisted of 15 habitual FFS and 15 habitual RFS competitive runners. Each subject ran at a preferred running velocity with their habitual strike pattern and then converted to the opposite strike pattern. Plantar flexor muscle forces and net ankle joint moments were greater in the FFS running compared to the RFS running during the first half of the stance phase. The average contact forces during this period increased by 41.7% at the ankle and 14.4% at the knee joint during FFS running. Peak ankle joint contact force was 1.5 body weights greater during FFS running (pstrike pattern. Copyright © 2013 Elsevier Ltd. All rights reserved.

Proceedings of the NKS-R and NKS-B joint summary seminar

International Nuclear Information System (INIS)

Gwynn, J.P.; Isaksson, P.

2009-08-01

Nordic Nuclear Safety Research (NKS) is a platform for Nordic cooperation and competence in nuclear safety and related radiation protection issues including emergency preparedness and protection of the environment. Its purpose is to carry out joint activities producing seminars, exercises, scientific articles, technical reports and other types of reference material, with special efforts made to engage young scientists. The region in question is the five Nordic countries, i.e., Denmark (including the Faroe Islands and Greenland), Finland, Iceland, Norway and Sweden, who share a common cultural and historic heritage. The Nordic countries have cooperated in the field of nuclear safety for approximately half a century, developing informal networks for exchange of information, strengthening the region's potential for fast, coordinated and adequate response to nuclear threats, incidents and accidents. Activities are financed and supported by Nordic authorities, research institutions, power companies, contractors and other organizations, with results used by participating organizations in their decision making processes and information efforts.The NKS-R and NKS-B Joint Summary Seminar held at the Armemuseum, Stockholm on the 26th - 27th of March 2009 showcased a range of activities supported by NKS over the previous 2 years and provided an opportunity to bring together researchers and end users from the wider NKS community. This summary seminar was the first joint venture between the NKS-R and NKS-B Programmes since the current two programme format was adopted by NKS. One of our intentions in organising the Joint Summary Seminar was to further the reciprocal awareness of ongoing research and issues under the respective NKS-R and NKS-B Programmes, with the aim of promoting new networking opportunities and generating new ideas and approaches to solving existing problems. (au)

Proceedings of the NKS-R and NKS-B joint summary seminar

Energy Technology Data Exchange (ETDEWEB)

Gwynn, J.P.; Isaksson, P. (eds.) (Nordic Nuclear Safety Research, (NKS) (Denmark))

2009-08-15

Nordic Nuclear Safety Research (NKS) is a platform for Nordic cooperation and competence in nuclear safety and related radiation protection issues including emergency preparedness and protection of the environment. Its purpose is to carry out joint activities producing seminars, exercises, scientific articles, technical reports and other types of reference material, with special efforts made to engage young scientists. The region in question is the five Nordic countries, i.e., Denmark (including the Faroe Islands and Greenland), Finland, Iceland, Norway and Sweden, who share a common cultural and historic heritage. The Nordic countries have cooperated in the field of nuclear safety for approximately half a century, developing informal networks for exchange of information, strengthening the region's potential for fast, coordinated and adequate response to nuclear threats, incidents and accidents. Activities are financed and supported by Nordic authorities, research institutions, power companies, contractors and other organizations, with results used by participating organizations in their decision making processes and information efforts. The NKS-R and NKS-B Joint Summary Seminar held at the Armemuseum, Stockholm on the 26th - 27th of March 2009 showcased a range of activities supported by NKS over the previous 2 years and provided an opportunity to bring together researchers and end users from the wider NKS community. This summary seminar was the first joint venture between the NKS-R and NKS-B Programmes since the current two programme format was adopted by NKS. One of our intentions in organising the Joint Summary Seminar was to further the reciprocal awareness of ongoing research and issues under the respective NKS-R and NKS-B Programmes, with the aim of promoting new networking opportunities and generating new ideas and approaches to solving existing problems. (au)

Study of the Peak Shear Strength of a Cement-Filled Hard Rock Joint

Science.gov (United States)

She, Cheng-Xue; Sun, Fu-Ting

2018-03-01

The peak shear strength of a cement-filled hard rock joint is studied by theoretical analysis and laboratory testing. Based on the concept of the shear resistance angle, by combining the statistical method and fractal theory, three new parameters are proposed to characterize the three-dimensional joint morphology, reflecting the effects of the average roughness, multi-scale asperities and the dispersion degree of the roughness distribution. These factors are independent of the measurement scale, and they reflect the anisotropy of the joint roughness. Compressive shear tests are conducted on cement-filled joints. Because joints without cement can be considered special cement-filled joints in which the filling degree of cement is zero, they are also tested. The cement-filled granite joint fails primarily along the granite-cement interfaces. The filling degree of cement controls the joint failure and affects its mechanical behaviour. With a decrease in the filling degree of cement, the joint cohesion decreases; however, the dilatancy angle and the basic friction angle of the interface increase. As the filling degree approaches zero, the cohesion approaches zero, while the dilatancy angle and the basic friction angle increase to those of the joint without cement. A set of formulas is proposed to evaluate the peak shear strength of the joints with and without cement. The formulas are shown to be reasonable by comparison with the tested peak shear strength, and they reflect the anisotropy of the strength. This research deepens the understanding of cement-filled joints and provides a method to evaluate their peak shear strength.

Dynamic modeling method of the bolted joint with uneven distribution of joint surface pressure

Science.gov (United States)

Li, Shichao; Gao, Hongli; Liu, Qi; Liu, Bokai

2018-03-01

The dynamic characteristics of the bolted joints have a significant influence on the dynamic characteristics of the machine tool. Therefore, establishing a reasonable bolted joint dynamics model is helpful to improve the accuracy of machine tool dynamics model. Because the pressure distribution on the joint surface is uneven under the concentrated force of bolts, a dynamic modeling method based on the uneven pressure distribution of the joint surface is presented in this paper to improve the dynamic modeling accuracy of the machine tool. The analytic formulas between the normal, tangential stiffness per unit area and the surface pressure on the joint surface can be deduced based on the Hertz contact theory, and the pressure distribution on the joint surface can be obtained by the finite element software. Futhermore, the normal and tangential stiffness distribution on the joint surface can be obtained by the analytic formula and the pressure distribution on the joint surface, and assigning it into the finite element model of the joint. Qualitatively compared the theoretical mode shapes and the experimental mode shapes, as well as quantitatively compared the theoretical modal frequencies and the experimental modal frequencies. The comparison results show that the relative error between the first four-order theoretical modal frequencies and the first four-order experimental modal frequencies is 0.2% to 4.2%. Besides, the first four-order theoretical mode shapes and the first four-order experimental mode shapes are similar and one-to-one correspondence. Therefore, the validity of the theoretical model is verified. The dynamic modeling method proposed in this paper can provide a theoretical basis for the accurate dynamic modeling of the bolted joint in machine tools.

Fatigue behaviour of friction welded medium carbon steel and austenitic stainless steel dissimilar joints

International Nuclear Information System (INIS)

Paventhan, R.; Lakshminarayanan, P.R.; Balasubramanian, V.

2011-01-01

Research highlights: → Fusion welding of dissimilar metals is a problem due to difference in properties. → Solid state welding process such as friction welding is a solution for the above problem. → Fatigue life of friction welded carbon steel and stainless steel joints are evaluated. → Effect of notch on the fatigue life of friction welded dissimilar joints is reported. → Formation of intermetallic is responsible for reduction in fatigue life of dissimilar joints. -- Abstract: This paper reports the fatigue behaviour of friction welded medium carbon steel-austenitic stainless steel (MCS-ASS) dissimilar joints. Commercial grade medium carbon steel rods of 12 mm diameter and AISI 304 grade austenitic stainless steel rods of 12 mm diameter were used to fabricate the joints. A constant speed, continuous drive friction welding machine was used to fabricate the joints. Fatigue life of the joints was evaluated conducting the experiments using rotary bending fatigue testing machine (R = -1). Applied stress vs. number of cycles to failure (S-N) curve was plotted for unnotched and notched specimens. Basquin constants, fatigue strength, fatigue notch factor and notch sensitivity factor were evaluated for the dissimilar joints. Fatigue strength of the joints is correlated with microstructure, microhardness and tensile properties of the joints.

Joint Matrices Decompositions and Blind Source Separation

Czech Academy of Sciences Publication Activity Database

Chabriel, G.; Kleinsteuber, M.; Moreau, E.; Shen, H.; Tichavský, Petr; Yeredor, A.

2014-01-01

Roč. 31, č. 3 (2014), s. 34-43 ISSN 1053-5888 R&D Projects: GA ČR GA102/09/1278 Institutional support: RVO:67985556 Keywords : joint matrices decomposition * tensor decomposition * blind source separation Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 5.852, year: 2014 http://library.utia.cas.cz/separaty/2014/SI/tichavsky-0427607.pdf

Collaborative models for the joint production of core health technology assessments: negative and positive aspects for the joint work of different European agencies.

Science.gov (United States)

Lo Scalzo, Alessandra; Vicari, Nicola; Corio, Mirella; Perrini, Maria Rosaria; Jefferson, Tom; Gillespie, Francesca; Cerbo, Marina

2014-11-01

The purpose of the European network for Health Technology Assessment (EUnetHTA) is to make HTA agencies collaborate sharing methods and tools thus avoiding duplication of evaluative efforts and allowing resource savings. From 2010 to 2012, the activities of the network were carried out through EUnetHTA Joint Action 1 and Work Package 4 Strand B aimed at producing two Core HTAs with two main objectives: to test the Web based Core model and the collaborative working models. Our objective in this article is to give an historical record of the Work Package activities highlighting what worked and what did not in the collaboration of researchers' groups coming from different agencies. A retrospective description of all the steps for the joint production of the two Core HTAs is provided starting from the first step of selecting technologies of common interest. Primary researchers' views on the whole process have been collected through a semi-structured telephonic interview supported by a questionnaire. Coordinators views were gathered during internal meetings and validated. Majority of respondents thought topic selection procedure was not clear and well managed. About collaborative models, small groups were seen to enable more exchange, whatever the model. According to coordinators, loss of expertise and experience during the production process, different languages, and novelty of the Online Tool were main barriers. Lessons learned from this first experience in Joint Action 1 paved the path for the collaboration in Joint Action 2, as it allowed enhancements and changes in models of collaborations and coordination.

Joint studies on large CANDU

International Nuclear Information System (INIS)