Why did so many German doctors join the Nazi Party early?

Science.gov (United States)

Haque, Omar S; De Freitas, Julian; Viani, Ivana; Niederschulte, Bradley; Bursztajn, Harold J

2012-01-01

During the Weimar Republic in the mid-twentieth century, more than half of all German physicians became early joiners of the Nazi Party, surpassing the party enrollments of all other professions. From early on, the German Medical Society played the most instrumental role in the Nazi medical program, beginning with the marginalization of Jewish physicians, proceeding to coerced "experimentation," "euthanization," and sterilization, and culminating in genocide via the medicalization of mass murder of Jews and others caricatured and demonized by Nazi ideology. Given the medical oath to "do no harm," many postwar ethical analyses have strained to make sense of these seemingly paradoxical atrocities. Why did physicians act in such a manner? Yet few have tried to explain the self-selected Nazi enrollment of such an overwhelming proportion of the German Medical Society in the first place. This article lends insight into this paradox by exploring some major vulnerabilities, motives, and rationalizations that may have predisposed German physicians to Nazi membership-professional vulnerabilities among physicians in general (valuing conformity and obedience to authority, valuing the prevention of contamination and fighting against mortality, and possessing a basic interest in biomedical knowledge and research), economic factors and motives (related to physician economic insecurity and incentives for economic advancement), and Nazi ideological and historical rationalizations (beliefs about Social Darwinism, eugenics, and the social organism as sacred). Of particular significance for future research and education is the manner in which the persecution of Jewish physician colleagues was rationalized in the name of medical ethics itself. Giving proper consideration to the forces that fueled "Nazi Medicine" is of great importance, as it can highlight the conditions and motivations that make physicians susceptible to misapplications of medicine, and guide us toward prevention of

Functional Detachment of Totalitarian Nazi Architecture

Science.gov (United States)

Antoszczyszyn, Marek

2017-10-01

The paper describes the systematization process of architectural styles in use during Nazi period in Germany between 1933-45. In the results of the research some regularity about strict concern between function & styling has been observed. Using comparison & case study as well as analytical methods there were pointed out characteristic features of more than 500 objects’ architectural appearance that helped to specify their styling & group them into architectural trends. Ultimately the paper proves that the found trends of architectural styling could be collected by functional detachment key. This observation explains easy to recognize even nowadays traceability - so characteristic to Nazi German architecture. Facing today pluralism in architecture, the findings could be a helpful key in the organization of spatial architectural identification process.

Hunters' motivations and values:

DEFF Research Database (Denmark)

Radder, Laetitia; Bech-Larsen, Tino

2008-01-01

This article examines the values and motivations of South African biltong hunters. A hierarchical value map of associations between attributes, consequences and values resulted from laddering interviews with 34 hunters. The Means-End Chain approach proved useful in identifying: (a) personal value...

Low-frequency electromagnetic measurements at the NPE and Hunter`s Trophy: A comparison

Energy Technology Data Exchange (ETDEWEB)

Sweeney, J.J. [Lawrence Livermore National Lab., CA (United States)

1994-12-31

Sensors and recorders were deployed for both the Non-Proliferative Experiment (NPE) and Hunter`s Trophy to measure low-frequency (1-30 Hz) electric and magnetic fields accompanying the detonation. Two stations were used for each event, located at a slant range of about 500 m, with measurements of orthogonal horizontal electric field and orthogonal horizontal and vertical magnetic field. Signals were recorded digitally with at 200 Hz sampling rate. Separate magnetic and electric signals were recorded which can be related both to the detonation and the arrival of the shock wave. The detonation time signal from the nuclear explosion is a relatively short pulse occurring with no detectable delay (within 0.5 ms) ranging from 11-19 ms after the detonation time. The cause of the initial electromagnetic signal for both chemical and nuclear explosions is unknown; the differences between the NPE and Hunter`s Trophy results may be related to the different mechanisms involved with plasma generation between nuclear and chemical explosions.

The Nazi Physicians as Leaders in Eugenics and "Euthanasia": Lessons for Today.

Science.gov (United States)

Grodin, Michael A; Miller, Erin L; Kelly, Johnathan I

2018-01-01

This article, in commemoration of the 70th anniversary of the Doctors' Trial at Nuremberg, reflects on the Nazi eugenics and "euthanasia" programs and their relevance for today. The Nazi doctors used eugenic ideals to justify sterilizations, child and adult "euthanasia," and, ultimately, genocide. Contemporary euthanasia has experienced a progression from voluntary to nonvoluntary and from passive to active killing. Modern eugenics has included both positive and negative selective activities. The 70th anniversary of the Doctors' Trial at Nuremberg provides an important opportunity to reflect on the implications of the Nazi eugenics and "euthanasia" programs for contemporary health law, bioethics, and human rights. In this article, we will examine the role that health practitioners played in the promotion and implementation of State-sponsored eugenics and "euthanasia" in Nazi Germany, followed by an exploration of contemporary parallels and debates in modern bioethics. 1 .

Marking Time: Women and Nazi Propaganda Art during World War II

Directory of Open Access Journals (Sweden)

Barbara McCloskey

2012-04-01

Full Text Available "Marking Time" considers the relative scarcity of woman's image in Nazi propaganda posters during World War II. This scarcity departs from the ubiquity of women in paintings and sculptures of the same period. In the fine arts, woman served to solidify the "Nazi myth" and its claim to the timeless time of an Aryan order simultaneously achieved and yet to come. Looking at poster art and using Ernst Bloch's notion of the nonsynchronous, this essay explores the extent to which women as signifiers of the modern – and thus as markers of time – threatened to expose the limits of this Nazi myth especially as the regime's war effort ground to its catastrophic end.

Jung's evolving views of Nazi Germany: from 1936 to the end of World War II.

Science.gov (United States)

Schoenl, William

2014-04-01

This article first shows Jung's evolving views of Nazi Germany from 1936 to the beginning of World War II. In a lecture at the Tavistock Clinic, London, in October 1936, he made his strongest and most negative statements to that date about Nazi Germany. While in Berlin in September 1937 for lectures to the Jung Gesellschaft, his observations of Hitler at a military parade led him to conclude that should the catastrophe of war come it would be far more and bloodier than he had previously supposed. After the Sudetenland Crisis in Fall 1938, Jung in interviews made stronger comments on Hitler and Nazi Germany. The article shows how strongly anti-Nazi Jung's views were in relation to events during World War II such as Nazi Germany's invasion of Poland, the fall of France, the bombings of Britain, the U.S. entry into the War, and Allied troops advancing into Germany. Schoenl and Peck, 'An Answer to the Question: Was Jung, for a Time, a "Nazi Sympathizer" or Not?' (2012) demonstrated how his views of Nazi Germany changed from 1933 to March 1936. The present article shows how his views evolved from 1936 to the War's end in 1945. © 2014, The Society of Analytical Psychology.

Developing predictions of in vivo developmental toxicity of ToxCast chemicals using mouse embryonic stem cells.

Science.gov (United States)

Developing predictions of in vivo developmental toxicity of ToxCast chemicals using mouse embryonic stem cells S. Hunter, M. Rosen, M. Hoopes, H. Nichols, S. Jeffay, K. Chandler1, Integrated Systems Toxicology Division, National Health and Environmental Effects Research Labor...

Scandinavian neuroscience during the Nazi era

DEFF Research Database (Denmark)

Kondziella, Daniel; Hansen, Klaus; Zeidman, Lawrence A

2013-01-01

Although Scandinavian neuroscience has a proud history, its status during the Nazi era has been overlooked. In fact, prominent neuroscientists in German-occupied Denmark and Norway, as well as in neutral Sweden, were directly affected. Mogens Fog, Poul Thygesen (Denmark) and Haakon Sæthre (Norway...

Peter Becker and his Nazi past: the man behind Becker muscular dystrophy and Becker myotonia.

Science.gov (United States)

Zeidman, Lawrence A; Kondziella, Daniel

2014-04-01

Peter Becker was a German neurologist who helped classify the muscular dystrophies, and described Becker muscular dystrophy and Becker myotonia. His involvement in National Socialism began in 1933, when he was compelled by his peers to join the SA (brown shirts). He later joined the Nazi party, the Nazi Doctors Association, and the Nazi Lecturers' Association. He renewed his SA membership to maintain his position at a genetics institute. Colleagues stated postwar that he was not an active Nazi, and he was de-Nazified in 1947, able to continue his career. Later, Becker admitted to most, but not all, of his Nazi memberships in his autobiography, and wrote 2 books exploring the origins of Nazism and racial hygiene. The "neurologic court of opinion" must weigh in on how we should best remember Becker, and at the very least, we as neurologists must learn the dangers of career opportunism at any cost.

Nazis on the State Payroll in 1930s Ireland

Directory of Open Access Journals (Sweden)

David O’Donoghue

2015-12-01

Full Text Available The Austro-German population of Ireland in 1936 was 529. Approximately 25% of the adult male cohort were, or became, members of Hitler’s Nazi Party (NSDAP. A small cadre of senior figures in the party were active in recruiting new members as Nazi Germany’s fortunes rose from 1933 to 1939. Some 32 Germans and Austrians resident in pre-war Ireland have been identified as Nazi Party members, although a small number of these were exchange students rather than full-time residents. This paper examines the six NSDAP members who held senior positions in the Irish public service. As Irish state employees they were in a contradictory position: swearing loyalty to Adolf Hitler’s Third Reich while attempting to hold down important jobs on the Irish state payroll. Dr. David O’Donoghue’s article scrutinises the activities of these six men, as well as explaining how they tried, by varying degrees, to serve two masters. The paper also examines their wartime and post-war lives.

Scandinavian neuroscience during the Nazi era.

Science.gov (United States)

Kondziella, Daniel; Hansen, Klaus; Zeidman, Lawrence A

2013-07-01

Although Scandinavian neuroscience has a proud history, its status during the Nazi era has been overlooked. In fact, prominent neuroscientists in German-occupied Denmark and Norway, as well as in neutral Sweden, were directly affected. Mogens Fog, Poul Thygesen (Denmark) and Haakon Sæthre (Norway) were resistance fighters, tortured by the Gestapo: Thygesen was imprisoned in concentration camps and Sæthre executed. Jan Jansen (Norway), another neuroscientist resistor, escaped to Sweden, returning under disguise to continue fighting. Fritz Buchthal (Denmark) was one of almost 8000 Jews escaping deportation by fleeing from Copenhagen to Sweden. In contrast, Carl Værnet (Denmark) became a collaborator, conducting inhuman experiments in Buchenwald concentration camp, and Herman Lundborg (Sweden) and Thorleif Østrem (Norway) advanced racial hygiene in order to maintain the "superior genetic pool of the Nordic race." Compared to other Nazi-occupied countries, there was a high ratio of resistance fighters to collaborators and victims among the neuroscientists in Scandinavia.

Nazi terror system and its practical use

OpenAIRE

Anvar M. Mamadaliev; Leon М. Bagdasaryan

2011-01-01

The article tells about reasons and consequences of Adolf Hitler’s terror. Special attention is attached to mechanism of Nazi dictatorship and its ideological bases, set in Hitler’s work ‘My Struggle’, the 25 Point Program.

Hunters in the New Millennium

DEFF Research Database (Denmark)

Hansen, Hans Peter

that hunting is a common source of conflict between different interests, only very few studies has been made to produce knowledge about people hunting for leisure. The survey “Hunters in the new millennium” is an attempt to contribute to a better understanding of hunters and hunting in an increasing urbanized...

NAZI REGIME IN THE PERIODICAL A NOTÍ­CIA.

Directory of Open Access Journals (Sweden)

Bruna Luíza Barcellos

2009-08-01

Full Text Available The periodical A Notícia, of Joinville, city colonized for Germans, supported the nazi regime since the ascension of Adolf Hitler to the power. Between 1932 and 1944, some editions had printed the figure of Hitler and the nazi symbol, beyond dither messages to that regime. Based in the Análise de conteúdo (BARDIN, 1977, this article searchs to understand the representation made for the periodical A Notícia on this historical landmark, in other words, bring to the light the consequences of a part of occured world-wide history in catarinense territory.

Germans, History, and the Nazi Past.

Science.gov (United States)

Young, Anne P.

1981-01-01

Discusses opposite findings of researchers concerning the amount of time given to the study of Hitler and the Third Reich in German Secondary Schools. Considers the relationship among scholarly work on the Nazi era, influences of the work on secondary school teachers, impact of curriculum reform, and effects of government educational…

Mathematicians fleeing from Nazi Germany individual fates and global impact

CERN Document Server

Siegmund-Schultze, Reinhard

2009-01-01

The emigration of mathematicians from Europe during the Nazi era signaled an irrevocable and important historical shift for the international mathematics world. Mathematicians Fleeing from Nazi Germany is the first thoroughly documented account of this exodus. In this greatly expanded translation of the 1998 German edition, Reinhard Siegmund-Schultze describes the flight of more than 140 mathematicians, their reasons for leaving, the political and economic issues involved, the reception of these emigrants by various countries, and the emigrants' continuing contributions to mathematics. The inf

Nazi terror system and its practical use

Directory of Open Access Journals (Sweden)

Anvar M. Mamadaliev

2011-02-01

Full Text Available The article tells about reasons and consequences of Adolf Hitler’s terror. Special attention is attached to mechanism of Nazi dictatorship and its ideological bases, set in Hitler’s work ‘My Struggle’, the 25 Point Program.

Hunter-gatherers have less famine than agriculturalists.

Science.gov (United States)

Berbesque, J Colette; Marlowe, Frank W; Shaw, Peter; Thompson, Peter

2014-01-01

The idea that hunter-gatherer societies experience more frequent famine than societies with other modes of subsistence is pervasive in the literature on human evolution. This idea underpins, for example, the 'thrifty genotype hypothesis'. This hypothesis proposes that our hunter-gatherer ancestors were adapted to frequent famines, and that these once adaptive 'thrifty genotypes' are now responsible for the current obesity epidemic. The suggestion that hunter-gatherers are more prone to famine also underlies the widespread assumption that these societies live in marginal habitats. Despite the ubiquity of references to 'feast and famine' in the literature describing our hunter-gatherer ancestors, it has rarely been tested whether hunter-gatherers suffer from more famine than other societies. Here, we analyse famine frequency and severity in a large cross-cultural database, in order to explore relationships between subsistence and famine risk. This is the first study to report that, if we control for habitat quality, hunter-gatherers actually had significantly less--not more--famine than other subsistence modes. This finding challenges some of the assumptions underlying for models of the evolution of the human diet, as well as our understanding of the recent epidemic of obesity and type 2 diabetes mellitus.

Danes - The keen bargain hunters

DEFF Research Database (Denmark)

Jensen, Birger Boutrup

2008-01-01

New research proves that Danes are keen bargain hunters, and that they do specific price checks before selecting a product.......New research proves that Danes are keen bargain hunters, and that they do specific price checks before selecting a product....

Human dignity in the Nazi era: implications for contemporary bioethics

Directory of Open Access Journals (Sweden)

O'Mathúna Dónal P

2006-03-01

Full Text Available Abstract Background The justification for Nazi programs involving involuntary euthanasia, forced sterilisation, eugenics and human experimentation were strongly influenced by views about human dignity. The historical development of these views should be examined today because discussions of human worth and value are integral to medical ethics and bioethics. We should learn lessons from how human dignity came to be so distorted to avoid repetition of similar distortions. Discussion Social Darwinism was foremost amongst the philosophies impacting views of human dignity in the decades leading up to Nazi power in Germany. Charles Darwin's evolutionary theory was quickly applied to human beings and social structure. The term 'survival of the fittest' was coined and seen to be applicable to humans. Belief in the inherent dignity of all humans was rejected by social Darwinists. Influential authors of the day proclaimed that an individual's worth and value were to be determined functionally and materialistically. The popularity of such views ideologically prepared German doctors and nurses to accept Nazi social policies promoting survival of only the fittest humans. A historical survey reveals five general presuppositions that strongly impacted medical ethics in the Nazi era. These same five beliefs are being promoted in different ways in contemporary bioethical discourse. Ethical controversies surrounding human embryos revolve around determinations of their moral status. Economic pressures force individuals and societies to examine whether some people's lives are no longer worth living. Human dignity is again being seen as a relative trait found in certain humans, not something inherent. These views strongly impact what is taken to be acceptable within medical ethics. Summary Five beliefs central to social Darwinism will be examined in light of their influence on current discussions in medical ethics and bioethics. Acceptance of these during the Nazi

Human dignity in the Nazi era: implications for contemporary bioethics.

Science.gov (United States)

O'Mathúna, Dónal P

2006-03-14

The justification for Nazi programs involving involuntary euthanasia, forced sterilisation, eugenics and human experimentation were strongly influenced by views about human dignity. The historical development of these views should be examined today because discussions of human worth and value are integral to medical ethics and bioethics. We should learn lessons from how human dignity came to be so distorted to avoid repetition of similar distortions. Social Darwinism was foremost amongst the philosophies impacting views of human dignity in the decades leading up to Nazi power in Germany. Charles Darwin's evolutionary theory was quickly applied to human beings and social structure. The term 'survival of the fittest' was coined and seen to be applicable to humans. Belief in the inherent dignity of all humans was rejected by social Darwinists. Influential authors of the day proclaimed that an individual's worth and value were to be determined functionally and materialistically. The popularity of such views ideologically prepared German doctors and nurses to accept Nazi social policies promoting survival of only the fittest humans.A historical survey reveals five general presuppositions that strongly impacted medical ethics in the Nazi era. These same five beliefs are being promoted in different ways in contemporary bioethical discourse. Ethical controversies surrounding human embryos revolve around determinations of their moral status. Economic pressures force individuals and societies to examine whether some people's lives are no longer worth living. Human dignity is again being seen as a relative trait found in certain humans, not something inherent. These views strongly impact what is taken to be acceptable within medical ethics. Five beliefs central to social Darwinism will be examined in light of their influence on current discussions in medical ethics and bioethics. Acceptance of these during the Nazi era proved destructive to many humans. Their widespread

Nazi indoctrination and anti-Semitic beliefs in Germany.

Science.gov (United States)

Voigtländer, Nico; Voth, Hans-Joachim

2015-06-30

Attempts at modifying public opinions, attitudes, and beliefs range from advertising and schooling to "brainwashing." Their effectiveness is highly controversial. In this paper, we use survey data on anti-Semitic beliefs and attitudes in a representative sample of Germans surveyed in 1996 and 2006 to show that Nazi indoctrination--with its singular focus on fostering racial hatred--was highly effective. Between 1933 and 1945, young Germans were exposed to anti-Semitic ideology in schools, in the (extracurricular) Hitler Youth, and through radio, print, and film. As a result, Germans who grew up under the Nazi regime are much more anti-Semitic than those born before or after that period: the share of committed anti-Semites, who answer a host of questions about attitudes toward Jews in an extreme fashion, is 2-3 times higher than in the population as a whole. Results also hold for average beliefs, and not just the share of extremists; average views of Jews are much more negative among those born in the 1920s and 1930s. Nazi indoctrination was most effective where it could tap into preexisting prejudices; those born in districts that supported anti-Semitic parties before 1914 show the greatest increases in anti-Jewish attitudes. These findings demonstrate the extent to which beliefs can be modified through policy intervention. We also identify parameters amplifying the effectiveness of such measures, such as preexisting prejudices.

Neuroscience in Nazi Europe Part III: victims of the Third Reich.

Science.gov (United States)

Zeidman, Lawrence A; Kondziella, Daniel

2012-11-01

In Part I, neuroscience collaborators with the Nazis were discussed, and in Part II, neuroscience resistors were discussed. In Part III, we discuss the tragedy regarding european neuroscientists who became victims of the Nazi onslaught on “non-Aryan” doctors. Some of these unfortunate neuroscientists survived Nazi concentration camps, but most were murdered. We discuss the circumstances and environment which stripped these neuroscientists of their profession, then of their personal rights and freedom, and then of their lives. We include a background analysis of anti-Semitism and Nazism in their various countries, then discuss in depth seven exemplary neuroscientist Holocaust victims; including Germans Ludwig Pick, Arthur Simons, and Raphael Weichbrodt, Austrians Alexander Spitzer and Viktor Frankl, and Poles Lucja Frey and Wladyslaw Sterling. by recognizing and remembering these victims of neuroscience, we pay homage and do not allow humanity to forget, lest this dark period in history ever repeat itself.

Constitutional Therapy and Clinical Racial Hygiene in Weimar and Nazi Germany.

Science.gov (United States)

Hau, Michael

2016-04-01

The paper examines the history of constitutional therapy in Weimar and Nazi Germany. Focusing on Walther Jaensch's "Institute for Constitutional Research" at the Charité in Berlin, it shows how an entrepreneurial scientist successfully negotiated the changing social and political landscape of two very different political regimes and mobilized considerable public and private resources for his projects. During the Weimar period, his work received funding from various state agencies as well as the Rockefeller foundation, because it fit well with contemporary approaches in public hygiene and social medicine that emphasized the need to restore the physical and mental health of children and youths. Jaensch successfully positioned himself as a researcher on the verge of developing new therapies for feeble-minded people, who threatened to become an intolerable burden on the Weimar welfare state. During the Nazi period, he successfully reinvented himself as a racial hygienist by convincing influential medical leaders that his ideas were a valuable complement to the negative eugenics of Nazi bio-politics. "Constitutional therapy," he claimed, could turn genetically healthy people with "inhibited mental development" (geistigen Entwicklungshemmungen) into fully productive citizens and therefore made a valuable contribution to Nazi performance medicine (Leistungsmedizin) with its emphasis on productivity. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Study of deaths by suicide of homosexual prisoners in Nazi Sachsenhausen concentration camp.

Science.gov (United States)

Cuerda-Galindo, Esther; López-Muñoz, Francisco; Krischel, Matthis; Ley, Astrid

2017-01-01

Living conditions in Nazi concentration camps were harsh and inhumane, leading many prisoners to commit suicide. Sachsenhausen (Oranienburg, Germany) was a concentration camp that operated from 1936 to 1945. More than 200,000 people were detained there under Nazi rule. This study analyzes deaths classified as suicides by inmates in this camp, classified as homosexuals, both according to the surviving Nazi files. This collective was especially repressed by the Nazi authorities. Data was collected from the archives of Sachsenhausen Memorial and the International Tracing Service in Bad Arolsen. Original death certificates and autopsy reports were reviewed. Until the end of World War II, there are 14 death certificates which state "suicide" as cause of death of prisoners classified as homosexuals, all of them men aged between 23 and 59 years and of various religions and social strata. Based on a population of 1,200 prisoners classified as homosexuals, this allows us to calculate a suicide rate of 1,167/100,000 (over the period of eight years) for this population, a rate 10 times higher than for global inmates (111/100,000). However, our study has several limitations: not all suicides are registered; some murders were covered-up as suicides; most documents were lost during the war or destroyed by the Nazis when leaving the camps and not much data is available from other camps to compare. We conclude that committing suicides in Sachsenhausen was a common practice, although accurate data may be impossible to obtain.

Neurogenic bladder in Hunter's syndrome.

Science.gov (United States)

Koyama, K; Moda, Y; Sone, A; Tanaka, H; Hino, Y

1994-01-01

We encountered a rare patient with Hunter's syndrome who exhibited urinary retention as a result of a neurogenic bladder, uninhibited detrusor contractions, and detrusor-sphincter dyssynergia. Neurological findings were consistent with cervical myelopathy and cervical MR imaging showed very narrow segments at the cord level C2-4. We speculate that this Hunter's syndrome patient has cervical myelopathy and that this neurological dysfunction causes the neurogenic bladder. PMID:8014981

Nazi indoctrination and anti-Semitic beliefs in Germany

Science.gov (United States)

Voigtländer, Nico; Voth, Hans-Joachim

2015-01-01

Attempts at modifying public opinions, attitudes, and beliefs range from advertising and schooling to “brainwashing.” Their effectiveness is highly controversial. In this paper, we use survey data on anti-Semitic beliefs and attitudes in a representative sample of Germans surveyed in 1996 and 2006 to show that Nazi indoctrination––with its singular focus on fostering racial hatred––was highly effective. Between 1933 and 1945, young Germans were exposed to anti-Semitic ideology in schools, in the (extracurricular) Hitler Youth, and through radio, print, and film. As a result, Germans who grew up under the Nazi regime are much more anti-Semitic than those born before or after that period: the share of committed anti-Semites, who answer a host of questions about attitudes toward Jews in an extreme fashion, is 2–3 times higher than in the population as a whole. Results also hold for average beliefs, and not just the share of extremists; average views of Jews are much more negative among those born in the 1920s and 1930s. Nazi indoctrination was most effective where it could tap into preexisting prejudices; those born in districts that supported anti-Semitic parties before 1914 show the greatest increases in anti-Jewish attitudes. These findings demonstrate the extent to which beliefs can be modified through policy intervention. We also identify parameters amplifying the effectiveness of such measures, such as preexisting prejudices. PMID:26080394

Mothers of the Race: The Elite Schools for German Girls under the Nazi Dictatorship

Science.gov (United States)

Wegner, Gregory Paul

2004-01-01

In a seeming contradiction of earlier education policy and ideology, the Nazi regime opened three elite schools for girls beginning in 1938. These relatively short-lived and little known institutions symbolized a Nazi penchant for the schooling of females as a preparation for motherhood and a means of preserving racial bloodlines. Drawing from…

Legal-Historical Aspects of Punishment of Nazi Criminals on the Background of the Adolf Eichmann Trial

OpenAIRE

Kohout, David

2013-01-01

in English Dissertation Thesis David Kohout: Legal-Historical Aspects of Punishment of Nazi Criminals on the Background of the Adolf Eichmann Trial This Dissertation on the topic of "Legal-Historical Aspects of Punishment of Nazi Criminals on the Background of the Adolf Eichmann Trial" seeks to analyze the main approaches to the prosecution and punishment of the Nazi crimes. It was chosen to use the trial of Adolf Eichmann in Jerusalem in years 1961 - 1962 as a connecting thread of this whole...

[Psychoanalysis during the Nazi era. Contemporary consequences of a historical controversy: the Wilhelm Reich "case"].

Science.gov (United States)

Nitzschke, B

1999-01-01

The paper sheds light on the extent of collaboration between the pre-World War II German Psychoanalytic Society (DPG) and the Nazi regime. This is shown by the story of the expulsion of Wilhelm Reich from membership in the DPG, at Freud's own bid. A leading German psychoanalyst, Carl Müller-Braunschweig, published the paper "Psychoanalysis and Weltanschauung" in the fanatically "national" (so-called "völkisch") Nazi propaganda organ Reichswart in 1993 following consultations with officials of the International Psychoanalytic Association (IPA) who endorsed these policies. This paper by Müller-Braunschweig was used both to prevent the possible outlawing of psychoanalysis by the Nazis and to deny official DPG support to Wilhelm Reich and the group of leftist-oriented IPA analysts who joined forces with him in opposing Nazi ideology. The paper concludes with examples from post-1945 historiography showing how the exclusion of Reich and the related DPG/IPA compromise and "appeasement" policy were either ignored or disclaimed.

Neuroscience in Nazi Europe part I: eugenics, human experimentation, and mass murder.

Science.gov (United States)

Zeidman, Lawrence A

2011-09-01

The Nazi regime in Germany from 1933 to 1945 waged a veritable war throughout Europe to eliminate neurologic disease from the gene pool. Fueled by eugenic policies on racial hygiene, the Nazis first undertook a sterilization campaign against "mental defectives," which included neurologic patients with epilepsy and other disorders, as well as psychiatric patients. From 1939-41 the Nazis instead resorted to "euthanasia" of many of the same patients. Some neuroscientists were collaborators in this program, using patients for research, or using extracted brains following their murder. Other reviews have focused on Hallervorden, Spatz, Schaltenbrand, Scherer, and Gross, but in this review the focus is on neuroscientists not well described in the neurology literature, including Scholz, Ostertag, Schneider, Nachtsheim, and von Weizsäcker. Only by understanding the actions of neuroscientists during this dark period can we learn from the slippery slope down which they traveled, and prevent history from repeating itself.

Discrete choice modeling of season choice for Minnesota turkey hunters

Science.gov (United States)

Schroeder, Susan A.; Fulton, David C.; Cornicelli, Louis; Merchant, Steven S.

2018-01-01

Recreational turkey hunting exemplifies the interdisciplinary nature of modern wildlife management. Turkey populations in Minnesota have reached social or biological carrying capacities in many areas, and changes to turkey hunting regulations have been proposed by stakeholders and wildlife managers. This study employed discrete stated choice modeling to enhance understanding of turkey hunter preferences about regulatory alternatives. We distributed mail surveys to 2,500 resident turkey hunters. Results suggest that, compared to season structure and lotteries, additional permits and level of potential interference from other hunters most influenced hunter preferences for regulatory alternatives. Low hunter interference was preferred to moderate or high interference. A second permit issued only to unsuccessful hunters was preferred to no second permit or permits for all hunters. Results suggest that utility is not strictly defined by harvest or an individual's material gain but can involve preference for other outcomes that on the surface do not materially benefit an individual. Discrete stated choice modeling offers wildlife managers an effective way to assess constituent preferences related to new regulations before implementing them. 

Opportunities for mourning when grief is disenfranchised: descendants of Nazi perpetrators in dialogue with Holocaust survivors.

Science.gov (United States)

Livingston, Kathy

2010-01-01

This article explores the concepts of unmourned and disenfranchised grief as a way to understand the experiences of adult children of Nazi perpetrators, who grew up with cultural norms of grieving alone or in silence. The scholarly literature on descendants of Nazis reflects a group unlikely to warrant empathy or support from others because of the stigma surrounding their family's possible involvement in the Holocaust atrocities. This article uses, as a case study approach, the testimony given by Monika Hertwig, the adult daughter of a high ranking Nazi, who appears in the documentary film, Inheritance. From the perspective of disenfranchised grief, defined as grief that is not socially recognized or supported, the article links Monika's testimony with existing research from in-depth interviews with other descendants of Nazis to suggest that, as a group, they lacked permission to grieve their deceased parents, acknowledgment of their grief, and opportunities to mourn. Based on the theory that the effects of grief can be transgenerational, the disenfranchisement experienced by the "children of the Third Reich" does not have to pass to subsequent generations if opportunities for mourning are made possible and some resolution of grief occurs. Studies have shown that ongoing dialogue groups between Holocaust survivors and descendants of Nazis provide opportunities for mourning to both groups.

Nurses Writing about Psychiatric Nurses' Involvement in Killings during the Nazi Era: A Preliminary Discourse Analysis.

Science.gov (United States)

Holmes, Colin A; McAllister, Margaret; Crowther, Andrew

2016-01-01

Nurses actively killed people in Nazi Europe between 1939 and 1945. The so-called ‘science of eugenics’ underpinned Nazi ideology, used to further the Nazi racist agenda. Edicts sanctioned selection and medically supervised killing of people, and nurses, principally in mental hospitals, participated in the killing of between 100–300 thousand patients. Erroneously termed ‘euthanasia', there were three phases: the initial programme involving children, the T4 adult programme, and ‘wild euthanasia'. Unofficial killings also took place before 1939. This paper uses discourse analysis to map and analyse published texts which explore the role of nurses in Nazi Germany. The aim is to identify its characteristics as a body of literature, to note strengths and weaknesses, emphases and silences, and to note aspects that need further exploration. It acknowledges that how these events are to be understood and represented in contemporary discourse constitutes a significant problem for historians of nursing.

Nazis y Matemáticas. Crónica de una Barbarie

Directory of Open Access Journals (Sweden)

José Manuel Sánchez Muñoz

2012-10-01

Full Text Available En este artículo se pretende dar una visión de las matemáticas durante el periodo en el que el partido nazi gobernó en Alemania y tuvo pretensiones de gobernar casi toda Europa. Desde 1933, año en el que los nazis subieron al poder, se produjo en Alemania una huida,deportación, expulsión, ingreso masivo en campos de concentración y el asesinato o suicidio de profesores e investigadores en su mayoría de origen étnico judío que por supuesto no dejó a las matemáticas indiferentes.

Does Lateral Transmission Obscure Inheritance in Hunter-Gatherer Languages?

Science.gov (United States)

Bowern, Claire; Epps, Patience; Gray, Russell; Hill, Jane; Hunley, Keith; McConvell, Patrick; Zentz, Jason

2011-01-01

especially high. High mobility, prestige asymmetries, and language shift may contribute to the high rates in these outliers. No support was found for claims that hunter-gatherer languages borrow more than agriculturalist languages. These results debunk the myth of high borrowing in hunter-gatherer languages and suggest that the evolution of these languages is governed by the same type of rules as those operating in large-scale agriculturalist speech communities. The results also show that local factors are likely to be more critical than general processes in determining high (or low) loan rates. PMID:21980394

SLIP CASTING METHOD

Science.gov (United States)

Allison, A.G.

1959-09-01

S>A process is described for preparing a magnesium oxide slip casting slurry which when used in conjunction with standard casting techniques results in a very strong "green" slip casting and a fired piece of very close dimensional tolerance. The process involves aging an aqueous magnestum oxide slurry, having a basic pH value, until it attains a specified critical viscosity at which time a deflocculating agent is added without upsetting the basic pH value.

Details of Nazis' A-Bomb program surface

CERN Multimedia

Glanz, J

2002-01-01

Werner Heisenberg, leader of the Nazi atomic bomb program, revealed the projects existence to Niels Bohr in a meeting in Copenhagen in 1941. But contrary to several historical accounts of the meeting, Heisenberg never expressed moral qualms about building a bomb for Hitler nor hinted that he might be willing to sabotage the project, according to secret documents cited in a London newspaper yesterday (2 pages).

Wildlife value orientations among hunters, landowners and the general public

DEFF Research Database (Denmark)

Gamborg, Christian; Jensen, Frank Søndergaard

2016-01-01

This article examined wildlife value orientations among hunters (n = 1,130) and landowners (n = 1,207) in comparison to the general public (n = 1,001 adults) in Denmark, a highly urbanized European country. Respondents were categorized into four value types based on their responses to 19 statements....... Significant differences in wildlife value orientations were found. Mutualists and distanced dominated in the public; most landowners and hunters were utilitarian followed by pluralist. Male hunters were more utilitarian than female. More active hunters were more utilitarian; hunters belonging to a hunting...... association were more utilitarian than those who did not belong to associations. Full-time farmers were more utilitarian than part-time farmers, and conventional farmers were more utilitarian than organic farmers. No significant difference with regard to residence for all three groups was found. Future...

Planet Hunters: Kepler by Eye

Science.gov (United States)

Schwamb, Megan E.; Lintott, C.; Fischer, D.; Smith, A. M.; Boyajian, T. S.; Brewer, J. M.; Giguere, M. J.; Lynn, S.; Parrish, M.; Schawinski, K.; Schmitt, J.; Simpson, R.; Wang, J.

2014-01-01

Planet Hunters (http://www.planethunters.org), part of the Zooniverse's (http://www.zooniverse.org) collection of online citizen science projects, uses the World Wide Web to enlist the general public to identify transits in the pubic Kepler light curves. Planet Hunters utilizes human pattern recognition to identify planet transits that may be missed by automated detection algorithms looking for periodic events. Referred to as ‘crowdsourcing’ or ‘citizen science’, the combined assessment of many non-expert human classifiers with minimal training can often equal or best that of a trained expert and in many cases outperform the best machine-learning algorithm. Visitors to the Planet Hunters' website are presented with a randomly selected ~30-day light curve segment from one of Kepler’s ~160,000 target stars and are asked to draw boxes to mark the locations of visible transits in the web interface. 5-10 classifiers review each 30-day light curve segment. Since December 2010, more than 260,000 volunteers world wide have participated, contributing over 20 million classifications. We have demonstrated the success of a citizen science approach with the project’s more than 20 planet candidates, the discovery of PH1b, a transiting circumbinary planet in a quadruple star system, and the discovery of PH2-b, a confirmed Jupiter-sized planet in the habitable zone of a Sun-like star. I will provide an overview of Planet Hunters, highlighting several of project's most recent exoplanet and astrophysical discoveries. Acknowledgements: MES was supported in part by a NSF AAPF under award AST-1003258 and a American Philosophical Society Franklin Grant. We acknowledge support from NASA ADAP12-0172 grant to PI Fischer.

Planet Hunters 2 in the K2 Era

Science.gov (United States)

Schwamb, Megan E.; Fischer, Debra; Boyajian, Tabetha S.; Giguere, Matthew J.; Ishikawa, Sascha; Lintott, Chris; Lynn, Stuart; Schmitt, Joseph; Snyder, Chris; Wang, Ji; Barclay, Thomas

2015-01-01

Planet Hunters (http://www.planethunters.org) is an online citizen science project enlisting hundreds of thousands of people to search for planet transits in the publicly released Kepler data. Volunteers mark the locations of visible transits in a web interface, with multiple independent classifiers reviewing a randomly selected ~30-day light curve segment. In September 2014, Planet Hunters entered a new phase. The project was relaunched with a brand new online classification interface and discussion tool built using the Zooniverse's (http://www.zooniverse.org) latest technology and web platform. The website has been optimized for the rapid discovery and identification of planet candidates in the light curves from K2, the two-wheeled ecliptic plane Kepler mission. We will give an overview of the new Planet Hunters classification interface and Round 2 review system in context of the K2 data. We will present the first results from the Planet Hunters 2 search of K2 Campaigns 0 and 1 including a summary of new planet candidates.

Nazi biopolitics and the dark geographies of the selva

NARCIS (Netherlands)

Giaccaria, P.; Minca, C.

2011-01-01

This article examines the spatialities of Nazi genocidial practices. It does so by engaging with the concepts of selva and città, as inspired by Italian philosopher Giorgio Agamben and drawing upon a broader tradition in human geography. Although the historical events that we recall have been

Secondary Guilt Syndrome May Have Led Nazi-persecuted Jewish Writers to Suicide

Directory of Open Access Journals (Sweden)

George M. Weisz

2015-10-01

Full Text Available Feelings of guilt have tormented Holocaust survivors, ranging from immediately after the liberation to later in life, for shorter or longer periods, and persisting for some throughout their entire post-war lives. Descriptions of the guilt experienced by survivors of the Nazi camps occupy an impressive amount of literature: “Why me?” was the question, when a younger and more able family member perished; “Why me?” when more productive members of the community perished; “Why me?” when a million and a half children were deprived of their lives. Many found the answer by retelling their stories, witnesses of what happened. This type of guilt is much different from the recently described phenomenon of survivor syndrome, namely the secondary guilt felt by Nazi-persecuted Jewish writers. Despite successes in all aspects of their life, these writers developed a self-incriminating guilt due to their perceived inadequacy of communicating, particularly in light of the resurging anti-Semitism worldwide. This paper deals with the survival and suicides of Nazi-persecuted Jewish writers and offers a possible explanation for their late selfdestructive acts

The structure of abrasion-resisting castings made of chromium cast iron

Directory of Open Access Journals (Sweden)

D. Kopyciński

2011-01-01

Full Text Available In this study presents the analyse of chrome iron cast structure (as-cast condition which are used in rugged conditions abrasion-percussive and high temperature. While producing the casts of chrome iron major influence has been preserve the structure of technologi cal process parameters. The addition to Fe-C-Cr alloy Ni, Mo or Cu and then proper heat treatment leads to the improvement of functional and mechanical cast qualities. Then it is possible to develop high mechanical properties which are recommended by PN-EN12513. As can it be seen from the above research silicon is an adverse chemical element in this kind of alloy cast iron. However, the reason of cracksappearing in chrome iron casts are phosphorus eutectic microareas. When the compound of Si and P reach the critical point, described inPN-88/H-83144 outdated standard, the microareas might appear.

Beyond the Cut Hunter: A Historical Epidemiology of HIV Beginnings in Central Africa.

Science.gov (United States)

Rupp, Stephanie; Ambata, Philippe; Narat, Victor; Giles-Vernick, Tamara

2016-12-01

In the absence of direct evidence, an imagined "cut hunter" stands in for the index patient of pandemic HIV/AIDS. During the early years of colonial rule, this explanation goes, a hunter was cut or injured from hunting or butchering a chimpanzee infected with simian immunodeficiency virus, resulting in the first sustained human infection with the virus that would emerge as HIV-1M. We argue here that the "cut hunter" relies on a historical misunderstanding and ecological oversimplification of human-chimpanzee (Pan Troglodytes troglodytes) interactions that facilitated pathogenic transmission. This initial host shift cannot explain the beginnings of the HIV/AIDS pandemic. Instead, we must understand the processes by which the virus became transmissible, possibly between Sangha basin inhabitants and ultimately reached Kinshasa. A historical epidemiology of the late nineteenth and twentieth centuries, provides a much-needed corrective to the major shortcomings of the cut hunter. Based on 62 oral historical interviews conducted in southeastern Cameroon and archival research, we show that HIV emerged from ecological, economic, and socio-political transformations of the late nineteenth and twentieth centuries. The gradual imposition of colonial rule built on and reoriented ecologies and economies, and altered older patterns of mobility and sociality. Certain changes may have contributed to the initial viral host shift, but more importantly, facilitated the adaptation of HIV-1M to human-to-human transmission. Our evidence suggests that the most critical changes occurred after 1920. This argument has important implications for public health policy, underscoring recent work emphasizing alternative pathways for zoonotic spillovers into human beings.

Vulnerable Hunter

OpenAIRE

Md.Asha Begum; Y.VishnuPriya; V.ManoranjanBabu; ,O.Srinivasu

2016-01-01

This project "VULNERABLE HUNTER" application main aim is to detect risk in our mobile applications. This application contains modules like Fetch Application, Generate Score, Uninstall and Display Graph. Through this application it detects risk so that this application is very useful to smart phone users Now-a-days so many people are using smart phones and people are crazy about new apps. But by installing all the applications into our mobile may reduce its performance. Some apps c...

Hunter-gatherer energetics and human obesity.

Science.gov (United States)

Pontzer, Herman; Raichlen, David A; Wood, Brian M; Mabulla, Audax Z P; Racette, Susan B; Marlowe, Frank W

2012-01-01

Western lifestyles differ markedly from those of our hunter-gatherer ancestors, and these differences in diet and activity level are often implicated in the global obesity pandemic. However, few physiological data for hunter-gatherer populations are available to test these models of obesity. In this study, we used the doubly-labeled water method to measure total daily energy expenditure (kCal/day) in Hadza hunter-gatherers to test whether foragers expend more energy each day than their Western counterparts. As expected, physical activity level, PAL, was greater among Hadza foragers than among Westerners. Nonetheless, average daily energy expenditure of traditional Hadza foragers was no different than that of Westerners after controlling for body size. The metabolic cost of walking (kcal kg(-1) m(-1)) and resting (kcal kg(-1) s(-1)) were also similar among Hadza and Western groups. The similarity in metabolic rates across a broad range of cultures challenges current models of obesity suggesting that Western lifestyles lead to decreased energy expenditure. We hypothesize that human daily energy expenditure may be an evolved physiological trait largely independent of cultural differences.

German science and black racism--roots of the Nazi Holocaust.

Science.gov (United States)

Haas, François

2008-02-01

The Nazi's cornerstone precept of "racial hygiene" gave birth to their policy of "racial cleansing" that led to the murders of millions. It was developed by German physicians and scientists in the late 19th century and is rooted in the period's Social Darwinism that placed blacks at the bottom of the racial ladder. This program was first manifested in the near-extermination of the African Herero people during the German colonial period. After WWI, the fear among the German populace that occupying African troops and their Afro-German children would lead to "bastardization" of the German people formed a unifying racial principle that the Nazis exploited. They extended this mind-set to a variety of "unworthy" groups, leading to the physician-administered racial Nuremberg laws, the Sterilization laws, the secret sterilization of Afro-Germans, and the German euthanasia program. This culminated in the extermination camps.

Children Mental Disorder Through The Nazi Invasion Portrayed In Louise Murphy’s Novel The True Story Of Hansel And Gretel

OpenAIRE

Damanik, Evi Nora

2016-01-01

This thesis entitled CHILDREN MENTAL DISORDER THROUGH THE NAZI INVASION PORTRAYED IN LOUISE MURPHY’S NOVEL THE TRUE STORY OF HANSEL AND GRETEL. This analysis focuses on the life of the children during the Nazi invasion in Poland. The objectives of this thesis are in order to describe the suffering that the children face during the invasion and to describe the psychological impact of the Nazi Invasion on the children. The theory used in this thesis is the Psychoanalysis- Indi...

The Higgs hunter's guide

CERN Document Server

Gunion, John F; Haber, Howard E; Kane, Gordon L

1989-01-01

The Higgs Hunter's Guide is a definitive and comprehensive guide to the physics of Higgs bosons. In particular, it discusses the extended Higgs sectors required by those recent theoretical approaches that go beyond the Standard Model, including supersymmetry and superstring-inspired models.

Wealth Transmission and Inequality Among Hunter-Gatherers

Science.gov (United States)

Hill, Kim; Marlowe, Frank; Nolin, David; Wiessner, Polly; Gurven, Michael; Bowles, Samuel; Mulder, Monique Borgerhoff; Hertz, Tom; Bell, Adrian

2010-01-01

We report quantitative estimates of intergenerational transmission and population-wide inequality for wealth measures in a set of hunter-gatherer populations. Wealth is defined broadly as factors that contribute to individual or household well-being, ranging from embodied forms such as weight and hunting success to material forms such household goods, as well as relational wealth in exchange partners. Intergenerational wealth transmission is low to moderate in these populations, but is still expected to have measurable influence on an individual’s life chances. Wealth inequality (measured with Gini coefficients) is moderate for most wealth types, matching what qualitative ethnographic research has generally indicated (if not the stereotype of hunter-gatherers as extreme egalitarians). We discuss some plausible mechanisms for these patterns, and suggest ways in which future research could resolve questions about the role of wealth in hunter-gatherer social and economic life. PMID:21151711

Nazi interne propaganda in die tweede wêreldoorlog | Kotze ...

African Journals Online (AJOL)

Adolf Hitler considered propaganda as a tactical weapon which should be used in warfare. The Second World War proved that it was no super weapon, and that it could not be used in isolation, but it is generally agreed that Nazi internal propaganda played a prominent part in upholding solidarity of morale in Germany ...

Cast dielectric composite linear accelerator

Science.gov (United States)

Sanders, David M [Livermore, CA; Sampayan, Stephen [Manteca, CA; Slenes, Kirk [Albuquerque, NM; Stoller, H M [Albuquerque, NM

2009-11-10

A linear accelerator having cast dielectric composite layers integrally formed with conductor electrodes in a solventless fabrication process, with the cast dielectric composite preferably having a nanoparticle filler in an organic polymer such as a thermosetting resin. By incorporating this cast dielectric composite the dielectric constant of critical insulating layers of the transmission lines of the accelerator are increased while simultaneously maintaining high dielectric strengths for the accelerator.

Critical Thinking on the Introduction of Digitization Within Engineering Training Systems in the Manufacturing Stage of Cast Parts

Science.gov (United States)

Lehene, T. R.; Samoilă, V.; Soporan, V. F.; Pădurețu, S.; Vescan, M. M.

2018-06-01

The paper aims to present a methodology for the analysis of the engineering training systems at the manufacturing stage of castings through critical engineering thinking. Its use [4, 5] requires the development of procedures capable of responding to the problems faced by engineering training in terms of acquiring the tools and procedures. The structure of the analysis took into consideration the following aspects: the motivation to use the proposed procedure, considerations on the engineering behavior, the design of the reasoning adapted to the analysis of the engineering training systems, the determination of the correlations in the processes of obtaining the cast products, the definition and calibration of the digital experiment, the definition and analysis of the factors influencing the last solidification area (the nature of the alloy, the shape of the mold and the casting geometry).

Hunter-gatherer energetics and human obesity.

Directory of Open Access Journals (Sweden)

Herman Pontzer

Full Text Available Western lifestyles differ markedly from those of our hunter-gatherer ancestors, and these differences in diet and activity level are often implicated in the global obesity pandemic. However, few physiological data for hunter-gatherer populations are available to test these models of obesity. In this study, we used the doubly-labeled water method to measure total daily energy expenditure (kCal/day in Hadza hunter-gatherers to test whether foragers expend more energy each day than their Western counterparts. As expected, physical activity level, PAL, was greater among Hadza foragers than among Westerners. Nonetheless, average daily energy expenditure of traditional Hadza foragers was no different than that of Westerners after controlling for body size. The metabolic cost of walking (kcal kg(-1 m(-1 and resting (kcal kg(-1 s(-1 were also similar among Hadza and Western groups. The similarity in metabolic rates across a broad range of cultures challenges current models of obesity suggesting that Western lifestyles lead to decreased energy expenditure. We hypothesize that human daily energy expenditure may be an evolved physiological trait largely independent of cultural differences.

Ethnic Factor in Nazi Occupation Policy During the First Stage of the Great Patriotic War (June 1941 - November 1942

Directory of Open Access Journals (Sweden)

Федор Леонидович Синицын

2011-09-01

Full Text Available In the article the author analyzes the main aspects of the Nazi government ethnic policy implemented on the occupied territory of the Soviet Union during the first stage of the Great Patriotic War (June 1941 - November 1942 in the «civic» sphere (local administering, regulating ethno-cultural activities, mobilizing labor force, etc.. The authour shows the peculiarities of using the «ethnic factor» by Nazi occupants, and identifies its main trends, including promotion of nationalism, separatism, and russophobia, as well as the contradictions of the Nazi policies in the matter of granting self-government to the peoples of the Soviet Union.

Hot subduction: Magmatism along the Hunter Ridge, SW Pacific

International Nuclear Information System (INIS)

Crawford, A.J.; Verbeeten, A.; Danyushevsky, L.V.; Sigurdsson, I.A.; Maillet, P.; Monzier, M.

1997-01-01

The Hunter 'fracture zone' is generally regarded as a transform plate boundary linking the oppositely dipping Tongan and Vanuatu subduction systems. Dredging along the Hunter Ridge and sampling of its northernmost extent, exposed as the island of Kadavu in Fiji, has yielded a diversity of magmatic suites, including arc tholeiites and high-Ca boninites, high-Mg lavas with some affinities to boninites and some affinities to adakites, and true adakitic lavas associated with remarkable low-Fe, high-Na basalts with 8-16 ppm Nb (herein high-Nb basalts). Lavas which show clear evidence of slab melt involvement in their petrogenesis occur at either end of the Hunter Ridge, whereas the arc tholeiites and high-Ca boninites appear to be restricted to the south central part of the ridge. Mineralogical and whole rock geochemical data for each of these suites are summarized, and a tectono-magmatic model for their genesis and distribution is suggested. Trace element features and radiogenic isotope data for the Hunter Ridge lavas indicate compositions analogue to Pacific MORB-like mantle

Understanding 'caring' through biopolitics: the case of nurses under the Nazi regime.

Science.gov (United States)

Foth, Thomas

2013-10-01

These days, discussions of what might be the 'essence' or the 'core' of nursing and nursing practice sooner or later end in a discussion about the concept of care. Most of the 'newer' nursing theories use this concept as a theoretical core concept. Even though these theoretical approaches use the concept of care with very different philosophical foundations and theoretical consistency, they concur in defining care as the essence of nursing and thereby glorify goodness as the decisive characteristic of nursing. These theoretical approaches neglect the fact that nursing is above all a profession with a societal task and is characterized by an asymmetrical power relation between nurses and their patients. Based on the results of a research project that analysed the role nurses played in the killing of psychiatric patients in Germany during the Nazi regime, I demonstrate that an approach based on the concept of care is not able to explain how nurses were able to commit crimes of such atrocity. These crimes were bound to an emotional investment that sustained the production of 'life unworthy of living'. In the case of nurses under the Nazi regime, certainly a kind of sadism was at issue that can only be explained if we recognize that the social bond is characterized by a certain tension; 'goodness' that caring theories assign to the social bond always coexists with the capacity for destruction. Using the Foucauldian theoretical framework of biopower and biopolitics enables one to analyse violence and power as integral parts of nurses' practice. Seen from this perspective, the killing of patients was part of a biopolitical programme and not a relapse into barbarism. The concept of care obscures the political agenda of nursing and does not provide a critical and political framework to analysing nursing practice. © 2013 John Wiley & Sons Ltd.

Honey, Hadza, hunter-gatherers, and human evolution.

Science.gov (United States)

Marlowe, Frank W; Berbesque, J Colette; Wood, Brian; Crittenden, Alyssa; Porter, Claire; Mabulla, Audax

2014-06-01

Honey is the most energy dense food in nature. It is therefore not surprising that, where it exists, honey is an important food for almost all hunter-gatherers. Here we describe and analyze widespread honey collecting among foragers and show that where it is absent, in arctic and subarctic habitats, honey bees are also rare to absent. Second, we focus on one hunter-gatherer society, the Hadza of Tanzania. Hadza men and women both rank honey as their favorite food. Hadza acquire seven types of honey. Hadza women usually acquire honey that is close to the ground while men often climb tall baobab trees to raid the largest bee hives with stinging bees. Honey accounts for a substantial proportion of the kilocalories in the Hadza diet, especially that of Hadza men. Cross-cultural forager data reveal that in most hunter-gatherers, men acquire more honey than women but often, as with the Hadza, women do acquire some. Virtually all warm-climate foragers consume honey. Our closest living relatives, the great apes, take honey when they can. We suggest that honey has been part of the diet of our ancestors dating back to at least the earliest hominins. The earliest hominins, however, would have surely been less capable of acquiring as much honey as more recent, fully modern human hunter-gatherers. We discuss reasons for thinking our early ancestors would have acquired less honey than foragers ethnographically described, yet still significantly more than our great ape relatives. Copyright © 2014 Elsevier Ltd. All rights reserved.

Mechanism and application of a newly developed pressure casting process: horizontal squeeze casting

Directory of Open Access Journals (Sweden)

Li Peijie

2014-07-01

Full Text Available Compared to traditional high-pressure die casting (HPDC, horizontal squeeze casting (HSC is a more promising way to fabricate high-integrity castings, owing to a reduced number of gas and shrinkage porosities produced in the casting. In this paper, the differences between HSC and HPDC are assessed, through which it is shown that the cavity filling velocity and the size of the gating system to be the most notable differences. Equipment development and related applications are also reviewed. Furthermore, numerical simulation is used to analyze the three fundamental characteristics of HSC: slow cavity filling, squeeze feeding and slow sleeve filling. From this, a selection principle is given based on the three related critical casting parameters: cavity filling velocity, gate size and sleeve filling velocity. Finally, two specific applications of HSC are introduced, and the future direction of HSC development is discussed.

Resensies: Letters of Stone. From Nazi Germany to South Africa ...

African Journals Online (AJOL)

Book Title: Letters of Stone. From Nazi Germany to South Africa. Book Author: Steven Robins. Cape Town: Penguin, 2016. 314 pp. ISBN 978 1 77609 024 2. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · http://dx.doi.org/10.17159/tvl.v.54i1.18.

Legitimization of regulatory norms: Waterfowl hunter acceptance of changing duck bag limits

Science.gov (United States)

Schroeder, Susan A.; Fulton, David C.; Lawrence, Jeffrey S.; Cordts, Steven D.

2014-01-01

Few studies have examined response to regulatory change over time, or addressed hunter attitudes about changes in hunting bag limits. This article explores Minnesota waterfowl hunters’ attitudes about duck bag limits, examining attitudes about two state duck bag limits that were initially more restrictive than the maximum set by the U.S. Fish and Wildlife Service (USFWS), but then increased to match federal limits. Results are from four mail surveys that examined attitudes about bag limits over time. Following two bag limit increases, a greater proportion of hunters rated the new bag limit “too high” and a smaller proportion rated it “too low.” Several years following the first bag limit increase, the proportion of hunters who indicated that the limit was “too high” had declined, suggesting hunter acceptance of the new regulation. Results suggest that waterfowl bag limits may represent legal norms that influence hunter attitudes and gain legitimacy over time.

Development and utilization of USGS ShakeCast for rapid post-earthquake assessment of critical facilities and infrastructure

Science.gov (United States)

Wald, David J.; Lin, Kuo-wan; Kircher, C.A.; Jaiswal, Kishor; Luco, Nicolas; Turner, L.; Slosky, Daniel

2017-01-01

The ShakeCast system is an openly available, near real-time post-earthquake information management system. ShakeCast is widely used by public and private emergency planners and responders, lifeline utility operators and transportation engineers to automatically receive and process ShakeMap products for situational awareness, inspection priority, or damage assessment of their own infrastructure or building portfolios. The success of ShakeCast to date and its broad, critical-user base mandates improved software usability and functionality, including improved engineering-based damage and loss functions. In order to make the software more accessible to novice users—while still utilizing advanced users’ technical and engineering background—we have developed a “ShakeCast Workbook”, a well documented, Excel spreadsheet-based user interface that allows users to input notification and inventory data and export XML files requisite for operating the ShakeCast system. Users will be able to select structure based on a minimum set of user-specified facility (building location, size, height, use, construction age, etc.). “Expert” users will be able to import user-modified structural response properties into facility inventory associated with the HAZUS Advanced Engineering Building Modules (AEBM). The goal of the ShakeCast system is to provide simplified real-time potential impact and inspection metrics (i.e., green, yellow, orange and red priority ratings) to allow users to institute customized earthquake response protocols. Previously, fragilities were approximated using individual ShakeMap intensity measures (IMs, specifically PGA and 0.3 and 1s spectral accelerations) for each facility but we are now performing capacity-spectrum damage state calculations using a more robust characterization of spectral deamnd.We are also developing methods for the direct import of ShakeMap’s multi-period spectra in lieu of the assumed three-domain design spectrum (at 0.3s for

Mental health perspectives of Hunter syndrome: Case reports of two biological siblings

Directory of Open Access Journals (Sweden)

Kabir Garg

2016-01-01

Full Text Available Hunter syndrome is a rare X-linked recessive disorder caused by deficiency of the lysosomal enzyme iduronate-2-sulphatase, leading to progressive accumulation of a substance called glycosaminoglycans in nearly all cell types, tissues, and organs. Hunter syndrome presents with facial dysmorphism, airway diseases, skeletal defects, cardiomyopathies, and neuropsychiatric manifestations. Mental subnormality is a cardinal feature in Hunter syndrome. This is a progressive cognitive decline that is not amenable to enzyme replacement therapy. Due to progressive cognitive decline, training the children to improve the adaptive functioning is a challenge that creates immense stress for the caregivers. Patients with Hunter syndrome should undergo serial assessment of intellectual ability and may be trained accordingly.

Linking Hunter Knowledge with Forest Change to Understand Changing Deer Harvest Opportunities in Intensively Logged Landscapes

Directory of Open Access Journals (Sweden)

Todd J. Brinkman

2009-06-01

Full Text Available The effects of landscape changes caused by intensive logging on the availability of wild game are important when the harvest of wild game is a critical cultural practice, food source, and recreational activity. We assessed the influence of extensive industrial logging on the availability of wild game by drawing on local knowledge and ecological science to evaluate the relationship between forest change and opportunities to harvest Sitka black-tailed deer (Odocoileus hemionus sitkensis on Prince of Wales Island, Alaska. We used data collected through interviews with local deer hunters and GIS analysis of land cover to determine relationships among landscape change, hunter access, and habitat for deer hunting over the last 50 yr. We then used these relationships to predict how harvest opportunities may change in the future. Intensive logging from 1950 into the 1990s provided better access to deer and habitat that facilitated deer hunting. However, successional changes in intensively logged forests in combination with a decline in current logging activity have reduced access to deer and increased undesirable habitat for deer hunting. In this new landscape, harvest opportunities in previously logged landscapes have declined, and hunters identify second-growth forest as one of the least popular habitats for hunting. Given the current state of the logging industry in Alaska, it is unlikely that the logging of the remaining old-growth forests or intensive management of second-growth forests will cause hunter opportunities to rebound to historic levels. Instead, hunter opportunities may continue to decline for at least another human generation, even if the long-term impacts of logging activity and deer harvest on deer numbers are minimal. Adapting hunting strategies to focus on naturally open habitats such as alpine and muskeg that are less influenced by external market forces may require considerably more hunting effort but provide the best option for

75 FR 32877 - Financial Assistance: Wildlife Restoration, Sport Fish Restoration, Hunter Education and Safety

Science.gov (United States)

2010-06-10

... resources, aquatic-life forms, and sport fishing; and (e) develop responsible attitudes and ethics toward..., Sport Fish Restoration, Hunter Education and Safety AGENCY: Fish and Wildlife Service, Interior. ACTION... governing the Wildlife Restoration, Sport Fish Restoration, and Hunter Education and Safety (Enhanced Hunter...

Core Hunter 3: flexible core subset selection.

Science.gov (United States)

De Beukelaer, Herman; Davenport, Guy F; Fack, Veerle

2018-05-31

Core collections provide genebank curators and plant breeders a way to reduce size of their collections and populations, while minimizing impact on genetic diversity and allele frequency. Many methods have been proposed to generate core collections, often using distance metrics to quantify the similarity of two accessions, based on genetic marker data or phenotypic traits. Core Hunter is a multi-purpose core subset selection tool that uses local search algorithms to generate subsets relying on one or more metrics, including several distance metrics and allelic richness. In version 3 of Core Hunter (CH3) we have incorporated two new, improved methods for summarizing distances to quantify diversity or representativeness of the core collection. A comparison of CH3 and Core Hunter 2 (CH2) showed that these new metrics can be effectively optimized with less complex algorithms, as compared to those used in CH2. CH3 is more effective at maximizing the improved diversity metric than CH2, still ensures a high average and minimum distance, and is faster for large datasets. Using CH3, a simple stochastic hill-climber is able to find highly diverse core collections, and the more advanced parallel tempering algorithm further increases the quality of the core and further reduces variability across independent samples. We also evaluate the ability of CH3 to simultaneously maximize diversity, and either representativeness or allelic richness, and compare the results with those of the GDOpt and SimEli methods. CH3 can sample equally representative cores as GDOpt, which was specifically designed for this purpose, and is able to construct cores that are simultaneously more diverse, and either are more representative or have higher allelic richness, than those obtained by SimEli. In version 3, Core Hunter has been updated to include two new core subset selection metrics that construct cores for representativeness or diversity, with improved performance. It combines and outperforms the

Hunter-Gatherers and the Origins of Religion.

Science.gov (United States)

Peoples, Hervey C; Duda, Pavel; Marlowe, Frank W

2016-09-01

Recent studies of the evolution of religion have revealed the cognitive underpinnings of belief in supernatural agents, the role of ritual in promoting cooperation, and the contribution of morally punishing high gods to the growth and stabilization of human society. The universality of religion across human society points to a deep evolutionary past. However, specific traits of nascent religiosity, and the sequence in which they emerged, have remained unknown. Here we reconstruct the evolution of religious beliefs and behaviors in early modern humans using a global sample of hunter-gatherers and seven traits describing hunter-gatherer religiosity: animism, belief in an afterlife, shamanism, ancestor worship, high gods, and worship of ancestors or high gods who are active in human affairs. We reconstruct ancestral character states using a time-calibrated supertree based on published phylogenetic trees and linguistic classification and then test for correlated evolution between the characters and for the direction of cultural change. Results indicate that the oldest trait of religion, present in the most recent common ancestor of present-day hunter-gatherers, was animism, in agreement with long-standing beliefs about the fundamental role of this trait. Belief in an afterlife emerged, followed by shamanism and ancestor worship. Ancestor spirits or high gods who are active in human affairs were absent in early humans, suggesting a deep history for the egalitarian nature of hunter-gatherer societies. There is a significant positive relationship between most characters investigated, but the trait "high gods" stands apart, suggesting that belief in a single creator deity can emerge in a society regardless of other aspects of its religion.

PALEOLITHIC HUNTER-GATHERERS' DIETARY PATTERNS ...

African Journals Online (AJOL)

Dr. Al-Domi

the main aspects of Paleolithic hunter-gatherers' dietary patterns and its main long-term ... Hence, people in developing countries have been exposed to certain ... as food habits, which prompted possible negative impacts on health status leading to ... costs [5, 7]. .... Agricultural revolution with efficient production of grains,.

Music in Nazi-Occupied Poland between 1939 and 1945

OpenAIRE

Naliwajek-Mazurek Katarzyna

2016-01-01

The paper is a survey of research on music in territories of occupied Poland conducted by the author in recent years, as well as a review of selected existing literature on this topic. A case study illustrates a principal thesis of this essay according to which music was used by the German Nazis in the General Government as a key elements of propaganda and in appropriation of conquered territories as both physical and symbolic spaces.

Comparison of residual stresses in sand- and chill casting of ductile cast iron wind turbine main shafts

International Nuclear Information System (INIS)

Sonne, M R; Hattel, J H; Frandsen, J O

2015-01-01

In this work, simulations of pouring, solidification and cooling, and residual stress evolution of sand and chill cast wind turbine main shafts is performed. The models are made in the commercial software MAGMAsoft. As expected, the cooling rate of the sand casting is shown to be much lower than for the chill casting, resulting in a very course microstructure. From the simulations the nodule count is found to be 17 nodules per mm 2 and 159 nodules per mm 2 for the sand and chill casting, respectively, in the critical region of the main bearing seat. This is verified from nodule counts performed on the real cast main shafts. Residual stress evaluations show an overall increase of the maximum principal stress field for the chill casting, which is expected. However, the stresses are found to be in compression on the surface of the chill cast main shaft, which is unforeseen. (paper)

Comparison of residual stresses in sand- and chill casting of ductile cast iron wind turbine main shafts

DEFF Research Database (Denmark)

Sonne, Mads Rostgaard; Frandsen, J. O.; Hattel, Jesper Henri

2015-01-01

In this work, simulations of pouring, solidification and cooling, and residual stress evolution of sand and chill cast wind turbine main shafts is performed. The models are made in the commercial software MAGMAsoft. As expected, the cooling rate of the sand casting is shown to be much lower than...... for the chill casting, resulting in a very course microstructure.From the simulations the nodule count is found to be 17 nodules per mm2 and 159 nodules permm2 for the sand and chill casting, respectively, in the critical region of the main bearing seat.This is verified from nodule counts performed on the real...... cast main shafts. Residual stressevaluations show an overall increase of the maximum principal stress field for the chill casting,which is expected. However, the stresses are found to be in compression on the surface of thechill cast main shaft, which is unforeseen....

Letters of Stone. From Nazi Germany to South Africa. Steven Robins ...

African Journals Online (AJOL)

merely hint at the gruesome reality in Nazi Germany. With the hindsight granted to present-day readers, we know the fate that awaited these men and women as an elongated and agonising social death reached its culmination in systematic mass murder. In describing his journeys to Germany,. Poland, Israel and the United ...

Life in space, space in life: Nazi topographies, geographical imaginations, and Lebensraum.

NARCIS (Netherlands)

Giaccaria, Paolo; Minca, C.

2016-01-01

This article focuses on the pivotal role the notion of Lebensraum played within the Nazi spatial mindscape. Tracing the complex and contradictory genealogies of Lebensraum, we note how geographers’ engagement with Geopolitik has only made modest reference to the role Lebensraum played in shaping the

El lugar del pasado en la ideología nazi

Directory of Open Access Journals (Sweden)

Ángela Uribe Botero

2013-12-01

Full Text Available La idea propuesta en este artículo se lleva a cabo a partir del análisis conceptual del término ''ideología'', tal como es usado por Hannah Arendt en Los orígenes del totalitarismo. El contexto semántico que se impone con el uso que hace Arendt de este término es revisado a la luz de la siguiente objeción propuesta por Phillippe Lacoue-Labarthe y Jean-Luc Nancy: el término ideología, tal como lo usa esta autora, no da cuenta de una de las características más importantes de la ideología nazi: el mito. Con el propósito de ilustrar esta idea, se aplica el sentido del término ''mito político'' propuesto por Roberto Esposito a algunas palabras contenidas en los discursos de Heinrich Himmler. Esto conduce, en la parte final del texto, a proponer, también en discusión con Arendt, un giro en la forma como podría llegar a ser entendida la relación con el pasado en la ideología nazi.

Ride, shoot, and call: wildlife use among contemporary urban hunters in Três Fronteiras, Brazilian Amazon

Directory of Open Access Journals (Sweden)

Nathalie van Vliet

2015-09-01

Full Text Available Most bushmeat studies in the Amazon region focus on hunting patterns of indigenous populations in rural settings. Our study describes the existence of urban hunters in medium-sized towns. Using a variety of data collection methods, we describe the main socioeconomic characteristics of urban hunters in Benjamin Constant and Atalaia do Norte, Brazil. We analyze the patterns and motivations of urban hunters as well as the type of prey harvested and quantities traded. All interviewed hunters are caboclos, people of mixed Brazilian indigenous and European origins from rural areas who now live in urban and peri-urban areas. Living in these more populated spaces allows these hunters better market options for their harvest and allows them to alternate hunting with other economic activities. Only 29% of the interviewed hunters relied solely on hunting. In total, 11.6 tons of bushmeat were harvested (of which 97% was traded by four hunters during the monitoring period (60 days. The most hunted species were terecay (Podocnemis unifilis, curassow (Crax sp., paca (Cuniculus paca, and tapir (Tapirus terrestris. The ratio of bushmeat sold to that consumed, as well as the level of participation in the bushmeat market chain, allowed us to differentiate between specialized and diversified hunters. Specialized hunters sell 81% of the bushmeat caught to known wholesalers in the city. Diversified hunters sell 21% of their total catch to families, neighbors, or friends directly as fresh meat, avoiding intermediaries. For all hunters, hunting localities are associated with peri-urban roadways that are easily reached by motorbike or bicycle from the hunters' houses in the urban areas or city fringes. Our results show that urban hunters in medium-sized towns exemplify how traditional hunting systems can be adapted in the face of globalization, by living close to the market, at relatively manageable distances from hunting grounds, and using modern methods of

Suicide in inmates in Nazis and Soviet concentration camps: historical overview and critique

Directory of Open Access Journals (Sweden)

Francisco eLopez-Munoz

2016-05-01

Full Text Available Living conditions in concentration camps were harsh and often inhumane, leading many prisoners to commit suicide. We have reviewed this topic in Nazi concentration camps (KL, Soviet special camps and gulags, providing some preliminary data of our research. Data show that the incidence of suicide in Nazi KL could be up to 30 times higher than the general population, and was also much higher than in Soviet special camps (maybe due to more favorable conditions for prisoners and the abolishment of death penalty, while available data on Soviet gulags are contradictory. However, data interpretation is very controversial, because, for example, the Nazi KL authorities used to cover up the murder victims as suicides. Most of suicides were committed in the first years of imprisonment and the method of suicide most commonly used was hanging, although other methods included cutting blood vessels, poisoning, contact with electrified wire, or starvation. It is possible to differentiate two behavior when committing suicide; impulsive behavior (contact with electrified barbed or premeditated suicide (hanging up or through poison. In Soviet special camps, possible motives for suicides could include feelings of guilt for crimes committed, fear of punishment and a misguided understanding of honor on the eve of criminal trials. Self-destructive behaviors such as self-mutilation in gulag camps or prisoners who let themselves die have been widely reported. Committing suicide in concentration camps was a common practice, although precise data may be impossible to obtain.

Cooperation and the evolution of hunter-gatherer storytelling.

Science.gov (United States)

Smith, Daniel; Schlaepfer, Philip; Major, Katie; Dyble, Mark; Page, Abigail E; Thompson, James; Chaudhary, Nikhil; Salali, Gul Deniz; Mace, Ruth; Astete, Leonora; Ngales, Marilyn; Vinicius, Lucio; Migliano, Andrea Bamberg

2017-12-05

Storytelling is a human universal. From gathering around the camp-fire telling tales of ancestors to watching the latest television box-set, humans are inveterate producers and consumers of stories. Despite its ubiquity, little attention has been given to understanding the function and evolution of storytelling. Here we explore the impact of storytelling on hunter-gatherer cooperative behaviour and the individual-level fitness benefits to being a skilled storyteller. Stories told by the Agta, a Filipino hunter-gatherer population, convey messages relevant to coordinating behaviour in a foraging ecology, such as cooperation, sex equality and egalitarianism. These themes are present in narratives from other foraging societies. We also show that the presence of good storytellers is associated with increased cooperation. In return, skilled storytellers are preferred social partners and have greater reproductive success, providing a pathway by which group-beneficial behaviours, such as storytelling, can evolve via individual-level selection. We conclude that one of the adaptive functions of storytelling among hunter gatherers may be to organise cooperation.

Criptología Nazi. Los Códigos Secretos de Hitler

Directory of Open Access Journals (Sweden)

José Manuel Sánchez Muñoz

2013-04-01

Full Text Available Este artículo trata la importancia de la desencriptación de los Códigos Enigma y Lorenz alemanes por parte de los aliados gracias al trabajo analítico de multitud de matemáticos, cuyo resultado fue vital para la derrota de los nazis en la 2ª Guerra Mundial, acortando ésta al menos en dos años.

Louis Aragon: (Re writing the Nazi-Soviet Pact

Directory of Open Access Journals (Sweden)

Angela KIMYONGÜR

2006-10-01

Full Text Available At the time of the Nazi-Soviet non-aggression pact of 1939, Louis Aragon was a member of the French Communist Party (PCF, a well known novelist and poet and a journalist. Whilst his writing career had undergone several notable transformations, not least that from surrealist to socialist realist, his political commitment to the left and, from 1927 to the PCF, remained steadfast for much of his life. Indeed, unlike the PCF’s interpretation of the Second World War, which underwent a number of s...

[Werner Catel--a protagonist in Nazi "pediatric euthanasia" and his post-war career].

Science.gov (United States)

Petersen, Hans-Christian; Zankel, Sönke

2003-01-01

This article deals with the biography of Werner Catel, a German paediatrician and protagonist of the Nazi programme for "euthanasia of children". Based on original research into recently discovered source materials, two aspects of Catel's life are considered. Firstly, Catel's attitude towards "euthanasia" is analysed. This analysis is not limited to the period of National Socialism, but focuses also on the phase before 1933 and especially on the era after 1945. Secondly, the authors explore Catel's academic career. What effects on his career in the later Federal Republic of Germany had his exposed role in the Nazi programme for "euthanasia of children"? In this context it is also examined how the Christian-Albrechts-University of Kiel/Germany, which employed Catel until 1960 in a leading position, judged the work of its former professor after his death.

Evaluation of PHI Hunter in Natural Language Processing Research.

Science.gov (United States)

Redd, Andrew; Pickard, Steve; Meystre, Stephane; Scehnet, Jeffrey; Bolton, Dan; Heavirland, Julia; Weaver, Allison Lynn; Hope, Carol; Garvin, Jennifer Hornung

2015-01-01

We introduce and evaluate a new, easily accessible tool using a common statistical analysis and business analytics software suite, SAS, which can be programmed to remove specific protected health information (PHI) from a text document. Removal of PHI is important because the quantity of text documents used for research with natural language processing (NLP) is increasing. When using existing data for research, an investigator must remove all PHI not needed for the research to comply with human subjects' right to privacy. This process is similar, but not identical, to de-identification of a given set of documents. PHI Hunter removes PHI from free-form text. It is a set of rules to identify and remove patterns in text. PHI Hunter was applied to 473 Department of Veterans Affairs (VA) text documents randomly drawn from a research corpus stored as unstructured text in VA files. PHI Hunter performed well with PHI in the form of identification numbers such as Social Security numbers, phone numbers, and medical record numbers. The most commonly missed PHI items were names and locations. Incorrect removal of information occurred with text that looked like identification numbers. PHI Hunter fills a niche role that is related to but not equal to the role of de-identification tools. It gives research staff a tool to reasonably increase patient privacy. It performs well for highly sensitive PHI categories that are rarely used in research, but still shows possible areas for improvement. More development for patterns of text and linked demographic tables from electronic health records (EHRs) would improve the program so that more precise identifiable information can be removed. PHI Hunter is an accessible tool that can flexibly remove PHI not needed for research. If it can be tailored to the specific data set via linked demographic tables, its performance will improve in each new document set.

[Widows of victims of Nazi concentration camps: their pathology].

Science.gov (United States)

Ryn, Z J

1992-09-01

The psychosocial situation of widows and orphans of victims of the Nazi concentration camps in Poland are presented. In 1984, 74 widows of victims from the Auschwitz-Birkenau camp were interviewed. This article describes widows' emotional-behavioral reactions when facing the imprisonment and death of their husbands, their difficulties in adapting themselves to widowhood, different adaptative forms of memories of their married life, and consequences relevant to widows' mental health and family, and social consequences of widowhood.

Music in Nazi-Occupied Poland between 1939 and 1945

Directory of Open Access Journals (Sweden)

Naliwajek-Mazurek Katarzyna

2016-12-01

Full Text Available The paper is a survey of research on music in territories of occupied Poland conducted by the author in recent years, as well as a review of selected existing literature on this topic. A case study illustrates a principal thesis of this essay according to which music was used by the German Nazis in the General Government as a key elements of propaganda and in appropriation of conquered territories as both physical and symbolic spaces.

Body and Gender in Nazi Concentration Camps

Directory of Open Access Journals (Sweden)

Bożena Karwowska

2009-01-01

Full Text Available The article Body and Gender in Nazi Concentration Camps is an attempt to discuss difficult issues of human sexuality and sexually marked behaviors in the context of the concentration camps, and their descriptions in the memoirs of the survivors. Using notions and concepts of the so called "black American feminism" the author (referring extensively to books by Stanisław Grzesiuk and Zofia Romanowiczowa shows how in the concentration camp the human body became the only space of a relative privacy of the prisoner. At the same time the body becomes a territory on which all - both biological and socially constructed - human fates cross.

Humans as predators: an overview of predation strategies of hunters with contrasting motivational drivers

Directory of Open Access Journals (Sweden)

Fredrik Dalerum

2018-01-01

Full Text Available Predator-prey theory suggests that generalist predators are linked to demographic stability of prey whereas specialists are destabilizing. We overview the demographic consequences of different predation strategies and hypothesize that subsistence hunting occurs opportunistically, persecution hunters behave like specialist predators, and recreational hunters behave like generalist predators. Under this hypothesis, persecution hunting would have destabilizing effects, whereas the effects of subsistence and recreational hunting would be neutral or stabilizing. We found poor empirical support for this hypothesis, but there was scarce empirical data. Recreational hunters mainly hunted opportunistically and hunting as managed persecution followed a type III functional response, i.e. with low hunting intensity at low game abundances and a switch to an increased intensity at some level of abundance. We suggest that recreational hunters have limited destabilizing effects on game populations and that hunting may be an ineffective way of complete the removal of invasive species. We urge for further studies quantifying the responses of hunters to game abundances, in particular studies evaluating the responses of subsistence hunters and illegal persecution.

The Enchanted Hunters in Nabokov’s Lolita

Directory of Open Access Journals (Sweden)

Justine Shu- Ting Kao

2017-06-01

Full Text Available In Nabokov’s Lolita, Humbert Humbert’s The Enchanted Hunters, as a quest for love, aims to reconstruct a felicitous world or integrate various fragmentary details into an organic unity that revives a lost love, experiencing it on the basis of irony, and revealing a simulation of the desire, violence, and despondency which have been expressed in myths of nymphs and Persephone. The protagonist never reaches this unity, but his narrative of erotic and romantic love reveals him as a pathetic addict engaged in mechanical reproduction related to the phenomena of desire, seduction, violence, and sex. His The Enchanted Hunters does not simulate what he expects of his childhood love with Annabel; rather, it simulates the erotic imagination suggested in Mary D. Sheriff’s term “nymphomania,” in which artists fall degenerately to a model of tragedy. Keywords: simulation, nymph, nymphomania, The Enchanted Hunters The Enchanted Hunters in Nabokov’s Lolita refers to the name of a hotel and the title of a play. This seeming coincidence is actually not coincidental: Nabokov weaves a story concerning a pedophile’s seduction of a prepubescent child into a “story within a story,” in which the girl is imagined as a seducer who bewitches a number of hunters. Just as the girl in the play is a figment of a poet’s imagination, so Lolita in the novel Lolita is an imaginary production of a middle-aged pedophile. Yet Lolita is not so much a novel revealing guilt and mental disorder, but a mélange of art and reality, or more specifically, it is about a coinage in which the author fabricates art and myth in real life. Parallel to the protagonist who simulates what he expects of his childhood love, Annabel, in the form of the nymphet, Lolita, Nabokov replicates the beauty of butterflies in the pursuit of beauty and immortality, and develops the world of art with a pathetic tone whereby we gradually perceive a simulation of the desire, violence, and

Influence of Age and Educational Level on the Behavior of Hunters in Vojvodina Province (Serbia

Directory of Open Access Journals (Sweden)

Vladimir Marković

2011-07-01

Full Text Available Education as an important factor in the development of economy has a major impact on the development of hunting and hunting tourism. In this research, it has conducted a survey of hunters from the territory of Vojvodina Province regarding their attitude and motives for hunting, importance of education, importance of GIS in hunting, poaching as well as their level of hunting ethics. Using SPSS program, it was cross-referenced the individual responses in relation to age category and level of education. The results show that the youngest hunters (18 to 35 years compared to middle age hunters (35-59 years and old hunters (over 60 visit hunting events more, they are the most informed about GIS and they are most willing to learn about these technologies. The number of hunters that took part in the poaching is proportional with their level of education, so that most hunters that participate in poaching hold a university degree. However, hunters holding a university degree in the highest percentage believe that GIS can contribute to the development of hunting largely, and are willing to participate in training.

Des tranchées au NSDAP. Culture de guerre et politisation des députés nazis

Directory of Open Access Journals (Sweden)

Nicolas Patin

2011-05-01

Full Text Available Quel fut le facteur décisif dans l’engagement politique des nazis ? Dans la littérature concernant la Grande Guerre, le conflit est dépeint comme un facteur essentiel : il aurait été créateur d’une “culture de guerre” qui expliquerait en grande partie la mobilisation de beaucoup de nazis. L’analyse de la fraction nationale-socialiste du Reichstag entre 1919 et 1933 ne dément pas ce résultat : elle comptait 80% d’anciens-combattants. Cependant, les autres partis, eux aussi, rassemblaient une proportion énorme de vétérans. Il est possible d’isoler un certain nombre d’attributs spécifiques aux parlementaires nazis, qui, combinées entre eux et avec le poids de l’héritage guerrier, donne une vision plus complexe : si la fraction du NSDAP avait un monopole, ce n’était pas celui de l’expérience guerrière, mais bien de la jeunesse et de l’expérience du front. Ses députés avaient dix ans de moins que les autres parlementaires. Par ailleurs, elle comptait dans ses rangs une proportion plus élevée de militaires de carrière, ou de fils de militaires, ainsi qu’un nombre important d’hommes attachés au monde rural, que ce soit par leur naissance, la profession de leur père ou les études qu’ils choisirent. Tous ces critères permettent de relativiser le poids de la guerre pour établir des profils plus diversifiés d’engagement politique.What was the main reason for German people to join the Nazi Party? In historical literature, First World War has been often depicted as a major explanation: the conflict is supposed to have created a “war culture” that would have led to the political mobilization of many Nazis. An analyze of the national-socialist members of the Reichstag between 1919 and 1933 does not contradict this hypothesis. Indeed, 80% of NSDAP MP’s were war veterans. Nevertheless, in other parties too, an enormous proportion of delegates were veterans. Actually other particularities can

Learning from the mistakes of others: How female elk (Cervus elaphus) adjust behaviour with age to avoid hunters.

Science.gov (United States)

Thurfjell, Henrik; Ciuti, Simone; Boyce, Mark S

2017-01-01

In animal behaviour, there is a dichotomy between innate behaviours (e.g., temperament or personality traits) versus those behaviours shaped by learning. Innate personality traits are supposedly less evident in animals when confounded by learning acquired with experience through time. Learning might play a key role in the development and adoption of successful anti-predator strategies, and the related adaptation has the potential to make animals that are more experienced less vulnerable to predation. We carried out a study in a system involving a large herbivorous mammal, female elk, Cervus elaphus, and their primary predator, i.e., human hunters. Using fine-scale satellite telemetry relocations, we tested whether differences in behaviour depending on age were due solely to selection pressure imposed by human hunters, meaning that females that were more cautious were more likely to survive and become older. Or whether learning also was involved, meaning that females adjusted their behaviour as they aged. Our results indicated that both human selection and learning contributed to the adoption of more cautious behavioural strategies in older females. Whereas human selection of behavioural traits has been shown in our previous research, we here provide evidence of additive learning processes being responsible for shaping the behaviour of individuals in this population. Female elk are indeed almost invulnerable to human hunters when older than 9-10 y.o., confirming that experience contributes to their survival. Female elk monitored in our study showed individually changing behaviours and clear adaptation as they aged, such as reduced movement rates (decreased likelihood of encountering human hunters), and increased use of secure areas (forest and steeper terrain), especially when close to roads. We also found that elk adjusted behaviours depending on the type of threat (bow and arrow vs. rifle hunters). This fine-tuning by elk to avoid hunters, rather than just

Learning from the mistakes of others: How female elk (Cervus elaphus adjust behaviour with age to avoid hunters.

Directory of Open Access Journals (Sweden)

Henrik Thurfjell

Full Text Available In animal behaviour, there is a dichotomy between innate behaviours (e.g., temperament or personality traits versus those behaviours shaped by learning. Innate personality traits are supposedly less evident in animals when confounded by learning acquired with experience through time. Learning might play a key role in the development and adoption of successful anti-predator strategies, and the related adaptation has the potential to make animals that are more experienced less vulnerable to predation. We carried out a study in a system involving a large herbivorous mammal, female elk, Cervus elaphus, and their primary predator, i.e., human hunters. Using fine-scale satellite telemetry relocations, we tested whether differences in behaviour depending on age were due solely to selection pressure imposed by human hunters, meaning that females that were more cautious were more likely to survive and become older. Or whether learning also was involved, meaning that females adjusted their behaviour as they aged. Our results indicated that both human selection and learning contributed to the adoption of more cautious behavioural strategies in older females. Whereas human selection of behavioural traits has been shown in our previous research, we here provide evidence of additive learning processes being responsible for shaping the behaviour of individuals in this population. Female elk are indeed almost invulnerable to human hunters when older than 9-10 y.o., confirming that experience contributes to their survival. Female elk monitored in our study showed individually changing behaviours and clear adaptation as they aged, such as reduced movement rates (decreased likelihood of encountering human hunters, and increased use of secure areas (forest and steeper terrain, especially when close to roads. We also found that elk adjusted behaviours depending on the type of threat (bow and arrow vs. rifle hunters. This fine-tuning by elk to avoid hunters, rather

Hunter-gatherer genomic diversity suggests a southern African origin for modern humans.

Science.gov (United States)

Henn, Brenna M; Gignoux, Christopher R; Jobin, Matthew; Granka, Julie M; Macpherson, J M; Kidd, Jeffrey M; Rodríguez-Botigué, Laura; Ramachandran, Sohini; Hon, Lawrence; Brisbin, Abra; Lin, Alice A; Underhill, Peter A; Comas, David; Kidd, Kenneth K; Norman, Paul J; Parham, Peter; Bustamante, Carlos D; Mountain, Joanna L; Feldman, Marcus W

2011-03-29

Africa is inferred to be the continent of origin for all modern human populations, but the details of human prehistory and evolution in Africa remain largely obscure owing to the complex histories of hundreds of distinct populations. We present data for more than 580,000 SNPs for several hunter-gatherer populations: the Hadza and Sandawe of Tanzania, and the ≠Khomani Bushmen of South Africa, including speakers of the nearly extinct N|u language. We find that African hunter-gatherer populations today remain highly differentiated, encompassing major components of variation that are not found in other African populations. Hunter-gatherer populations also tend to have the lowest levels of genome-wide linkage disequilibrium among 27 African populations. We analyzed geographic patterns of linkage disequilibrium and population differentiation, as measured by F(ST), in Africa. The observed patterns are consistent with an origin of modern humans in southern Africa rather than eastern Africa, as is generally assumed. Additionally, genetic variation in African hunter-gatherer populations has been significantly affected by interaction with farmers and herders over the past 5,000 y, through both severe population bottlenecks and sex-biased migration. However, African hunter-gatherer populations continue to maintain the highest levels of genetic diversity in the world.

PLANET HUNTERS: ASSESSING THE KEPLER INVENTORY OF SHORT-PERIOD PLANETS

International Nuclear Information System (INIS)

Schwamb, Megan E.; Lintott, Chris J.; Lynn, Stuart; Smith, Arfon M.; Simpson, Robert J.; Fischer, Debra A.; Giguere, Matthew J.; Brewer, John M.; Parrish, Michael; Schawinski, Kevin

2012-01-01

We present the results from a search of data from the first 33.5 days of the Kepler science mission (Quarter 1) for exoplanet transits by the Planet Hunters citizen science project. Planet Hunters enlists members of the general public to visually identify transits in the publicly released Kepler light curves via the World Wide Web. Over 24,000 volunteers reviewed the Kepler Quarter 1 data set. We examine the abundance of ≥2 R ⊕ planets on short-period ( ⊕ Planet Hunters ≥85% efficient at identifying transit signals for planets with periods less than 15 days for the Kepler sample of target stars. Our high efficiency rate for simulated transits along with recovery of the majority of Kepler ≥4 R ⊕ planets suggests that the Kepler inventory of ≥4 R ⊕ short-period planets is nearly complete.

Drivers of change in hunter offtake and hunting strategies in Sendje, Equatorial Guinea.

Science.gov (United States)

Gill, David J C; Fa, John E; Rowcliffe, J Marcus; Kümpel, Noëlle F

2012-12-01

Economic development in Africa is expected to increase levels of bushmeat hunting through rising demand for meat and improved transport infrastructure. However, few studies have tracked long-term changes in hunter behavior as a means of testing this prediction. We evaluated changes in hunter behavior in a rural community in Equatorial Guinea over a period of rapid national economic growth, during which time road access to the regional capital greatly improved. We conducted offtake surveys (Supporting Information) over 3 7-week periods at the same time of year in 1998, 2003, and 2010 and conducted hunter and household interviews (Supporting Information) in 2003 and 2010. We tested whether relations existed among catch, hunting effort, hunting strategy, and income earned through hunting and other livelihoods in 2003 and 2010. Although village offtake increased from 1775 kg in 1998 to 4172 kg in 2003, it decreased in 2010 to 1361 kg. Aggregate catch per unit effort (i.e., number of carcasses caught per hunter and per trap) decreased from 2003 to 2010, and the majority of hunters reported a decrease in abundance of local fauna. Although these results are indicative of unsustainable hunting, cumulative changes in offtake and catch per unit effort were driven by a contraction in the total area hunted following an out-migration of 29 of the village's hunters, most of whom left to gain employment in the construction industry, after 2003. Hunters operating in both 2003 and 2010 hunted closer to the village because an increased abundance of elephants posed a danger and because they desired to earn income through other activities. Our study provides an example of national economic development contributing to a reduction in the intensity and extent of hunting. ©2012 Society for Conservation Biology.

High adult mortality among Hiwi hunter-gatherers: implications for human evolution.

Science.gov (United States)

Hill, Kim; Hurtado, A M; Walker, R S

2007-04-01

Extant apes experience early sexual maturity and short life spans relative to modern humans. Both of these traits and others are linked by life-history theory to mortality rates experienced at different ages by our hominin ancestors. However, currently there is a great deal of debate concerning hominin mortality profiles at different periods of evolutionary history. Observed rates and causes of mortality in modern hunter-gatherers may provide information about Upper Paleolithic mortality that can be compared to indirect evidence from the fossil record, yet little is published about causes and rates of mortality in foraging societies around the world. To our knowledge, interview-based life tables for recent hunter-gatherers are published for only four societies (Ache, Agta, Hadza, and Ju/'hoansi). Here, we present mortality data for a fifth group, the Hiwi hunter-gatherers of Venezuela. The results show comparatively high death rates among the Hiwi and highlight differences in mortality rates among hunter-gatherer societies. The high levels of conspecific violence and adult mortality in the Hiwi may better represent Paleolithic human demographics than do the lower, disease-based death rates reported in the most frequently cited forager studies.

Hunter-gatherers in southeast Asia: from prehistory to the present.

Science.gov (United States)

Higham, Charles

2013-01-01

Anatomically modern hunter-gatherers expanded from Africa into Southeast Asia at least 50,000 years ago, where they probably encountered and interacted with populations of Homo erectus and Homo floresiensis and the recently discovered Denisovans. Simulation studies suggest that these hunter-gatherers may well have followed a coastal route that ultimately led to the settlement of Sahul, while archaeology confirms that they also crossed significant seas and explored well into the interior. They also adapted to marked environmental changes that alternated between relatively cool and dry conditions and warmer, wetter interludes. During the former, the sea fell by up to 120 m below its present level, which opened up a vast low-lying area known as Sundaland. Three principal alignments can be identified: the first involved the occupation of rock shelters in upland regions, the second has identified settlement on broad riverine floodplains, and the last concentrated on the raised beaches formed from about five millennia ago when the sea level was elevated above its present position. This cultural sequence was dislocated about 4 kya when rice and millet farmers infiltrated the lowlands of Southeast Asia ultimately from the Yangtze River valley. It is suggested that this led to two forms of interaction. In the first, the indigenous hunter-gatherers integrated with intrusive Neolithic communities and, while losing their cultural identity, contributed their genes to the present population of Southeast Asia. In the second, hunter-gatherers withdrew to rainforest refugia and, through selective pressures inherent in such an environment, survived as the small-bodied, dark-skinned humans found to this day in the Philippines, Peninsular Malaysia and Thailand, and the Andaman Islands. Beyond the impact of expansive rice farmers in Melanesia and Australia, hunter-gatherers continued to dominate until they encountered European settlement. Copyright © 2013 Wayne State University Press

Future Discounting in Congo Basin Hunter-Gatherers Declines with Socio-Economic Transitions.

Directory of Open Access Journals (Sweden)

Gul Deniz Salali

Full Text Available Humans have a tendency to discount the future; that is we value small, short-term rewards over larger, long-term rewards. The degree of future discounting, however, changes in response to socio-ecological factors. Here, we study Mbendjele BaYaka hunter-gatherers of northern Congo and their farmer neighbours to investigate adaptations in inter-temporal preferences in humans. We argue that in immediate-return systems, where food storage is absent and egalitarianism is enforced through levelling mechanisms, future discounting is an adaptive strategy to prevent wealth accumulation and the emergence of hierarchies. This ensures food sharing and allows for survival in unpredictable environments where there is risk of an energy shortfall. On the other hand, when food storage is made possible by the emergence of agriculture or as seen in some delayed-return hunter-gatherer populations, wealth accumulation, hierarchies and lower discount rates become the adaptive strategy. Therefore, individuals in immediate-return, egalitarian societies will discount the future more than those in non-egalitarian, delayed-return societies. Consistent with the predictions we found that market integration and socio-economic transitions decrease the future discounting in Mbendjele hunter-gatherers. Our measures of socio-economic differences marked this transition in hunter-gatherers living in a logging town. The degree of future-discounting was the same between more market-integrated hunter-gatherers and their farmer neighbours.

SCREENING THE SOCIAL FACE OF DENMARK TO THE NAZIS

DEFF Research Database (Denmark)

Ørskov, Frederik Forrai

2018-01-01

Looking into the state-sponsored creation and presentation of a German-language film on the Danish social state, this article discusses the complexities of Danish–German relations during the German occupation of Denmark, 1940–1945. The film, Das soziale Gesicht Dänemarks, was screened in Berlin...... to a full house, including a number of Nazi notables, and followed by a presentation by the Danish Minister of Labor and Social Affairs. Based on archival research and film analysis, the article argues that the screening in Berlin informs an understanding of an asymmetrical power relationship between...

Hunter College Dance Therapy Masters Program.

Science.gov (United States)

Schmais, Claire; White, Elissa Q.

Described is development of the Hunter College dance therapy 18-month 30-credit masters program involving 33 adult students, (in two classes beginning in 1971 and 1972), an educational model, internship in psychiatric institutions, and preparation of instructional materials. The dance therapist is said to incorporate the psychiatric patient's…

Wild-harvested venison yields and sharing by Michigan deer hunters

Science.gov (United States)

Goguen, Amber D.; Riley, Shawn J.; Organ, John F.; Rudolph, Brent A.

2018-01-01

An increased societal focus on wildlife as food and recent policy deliberations regarding legal markets for wild-harvested meat are encouraging wildlife managers and researchers to examine the amount, use, and distribution of meat yielded through recreational hunting. We used responses to questions on the Michigan Deer Harvest Study to estimate the maximum yield of edible venison and assess hunters’ sharing behaviors. We estimated 11,402–14,473 metric tons of edible venison were procured during the 2013 hunting season. Of hunters who harvested a deer, 85% shared their venison. Hunters who shared did so with an average of 5.6 people (SD = 4.5). Sharing occurred most frequently within tight social networks: members of hunters’ households (69%), relatives (52%), and friends, neighbors, or coworkers (50%). In the absence of legal markets, venison is distributed widely by hunters and greatly amplifies the number of people benefiting from hunting. Nonetheless, we also identified the potential breadth of exposure to disease or contaminants from wild-harvested meat.

Anterior Hypopituitarism and Treatment Response in Hunter Syndrome: A Comparison of Two Patients

Directory of Open Access Journals (Sweden)

Munier A. Nour

2016-01-01

Full Text Available Hypopituitarism is a clinically important diagnosis and has not previously been reported in Hunter syndrome. We contrast two cases with anatomic pituitary anomalies: one with anterior panhypopituitarism and the other with intact pituitary function. Patient 1, a 10-year-old boy with Hunter syndrome, was evaluated for poor growth and an ectopic posterior pituitary gland. Endocrine testing revealed growth hormone (GH deficiency, secondary adrenal insufficiency, and tertiary hypothyroidism. An improvement in growth velocity with hormone replacement (GH, thyroxine, and corticosteroid was seen; however, final adult height remained compromised. Patient 2, a 13-year-old male with Hunter syndrome, was evaluated for growth failure. He had a large empty sella turcica with posteriorly displaced pituitary. Functional endocrine testing was normal and a trial of GH-treatment yielded no significant effect. Panhypopituitarism associated with pituitary anomalies has not been previously reported in Hunter syndrome and was an incidental finding of significant clinical importance. In the setting of documented anterior hypopituitarism, while hormone replacement improved growth velocity, final height remained impaired. In patient 2 with equivocal GH-testing results, treatment had no effect on linear growth. These cases highlight the importance of careful clinical assessment in Hunter syndrome and that judicious hormone replacement may be indicated in individual cases.

USE OF HIGH-STRENGTH BAINITIC CAST IRON FOR PRODUCING GEAR WHEELS

Directory of Open Access Journals (Sweden)

A. I. Pokrovskiy

2015-01-01

Full Text Available The advantages and drawbacks of high-strength cast irons with bainitic structure are reviewed basing on the authors’ own experience in the production of critical partsfrom this material and on the analysis of world trends. A possibility of the replacement of alloy steels by bainitic cast iron in manufacturing critical machine parts is discussed.

Sixty Years of Casting Research

Science.gov (United States)

Campbell, John

2015-11-01

The 60 years of solidification research since the publication of Chalmer's constitutional undercooling in 1953 has been a dramatic advance of understanding which has and continues to be an inspiration. In contrast, 60 years of casting research has seen mixed fortunes. One of its success stories relates to improvements in inoculation of gray irons, and another to the discovery of spheroidal graphite iron, although both of these can be classified as metallurgical rather than casting advances. It is suggested that true casting advances have dated from the author's lab in 1992 when a critical surface turbulence condition was defined for the first time. These last 20 years have seen the surface entrainment issues of castings developed to a sufficient sophistication to revolutionize the performance of light alloy and steel foundries. However, there is still a long way to go, with large sections of the steel and Ni-base casting industries still in denial that casting defects are important or even exist. The result has been that special ingots are still cast poorly, and shaped casting operations have suffered massive losses. For secondary melted and cast materials, electro-slag remelting has the potential to be much superior to expensive vacuum arc remelting, which has cost our aerospace and defense industries dearly over the years. This failure to address and upgrade our processing of liquid metals is a serious concern, since the principle entrainment defect, the bifilm, is seen as the principle initiator of cracks in metals; in general, bifilms are the Griffith cracks that initiate failures by cracking. A new generation of crack resistant metals and engineering structures can now be envisaged.

Hitler's bible: an analysis of the relationship between American and German eugenics in pre-war Nazi Germany.

Science.gov (United States)

Brown, Susan

2009-06-01

Throughout the last century the wellbeing of those with disability has been threatened by the idea of eugenics. The most notable and extreme example of this could be considered to have been carried out during World WarTwo, within Nazi eugenic programmes. These resulted in the sterilisation and killing of hundreds of thousands of disabled people. Through research of a wide range of sources it has been established that much of the inspiration and encouragement for this rapidly progressing movement in Germany initially came from America, most notably from California. American eugenicists expressed interest, and at times jealousy, at the speed of the progression in German eugenics. German Sterilisation laws were drafted following careful study of American experiments and research, while financial support from a number of American individuals encouraged further German research. Correspondence between influential leaders, including Hitler, Grant and Whitney, Verschuer and Popenoe, on both sides also added to the developing relationship. In conclusion, although there are a number of vital differences between the progress of the eugenics programme in America and in pre-war Nazi Germany, and eugenics in America never produced the massive genocide that occurred in Germany, it is clear that the research, encouragement and enthusiasm from America had a profound influence on the rapidly growing Nazi eugenics movement.

Clarifying beliefs underlying hunter intentions to support a ban on lead shot

Science.gov (United States)

Schroeder, Susan A.; Fulton, David C.; Doncarlos, Kathy

2016-01-01

Shot from hunting adds toxic lead to environments worldwide. Existing lead shot regulations have been instituted with little understanding of hunter beliefs and attitudes. This study applied the Theory of Reasoned Action, using a multilevel, multivariate approach, to clarify how positive and negative beliefs relate to attitudes about a ban on lead shot. Structure coefficients and commonality analysis were employed to further examine relationships between beliefs and attitudes. Results suggest that while both positive and negative outcomes influence attitudes, positive outcomes were more influential for supporters and negative beliefs for opposers. Management may need to focus on the results from hunters who indicated that they would be unlikely to support a ban, as these hunters include those who may actively oppose additional efforts to regulate lead.

The social base of NSDAP: Reasons for Nazis success in 1928-1933 elections

Directory of Open Access Journals (Sweden)

E E Shults

2015-12-01

Full Text Available The article focuses on four key questions that, in the author’s opinion, help to explain the results of 1928-1933’s elections in Germany, although there are no definite answers to these questions among scientists: 1 was the electoral growth of NSDAP exhausted in the Reichstag’s elections in July 1932; 2 did the German working class vote for NSDAP; 3 what was the role of the protest electorate and its chances to mobilize supporters; 4 what was the role of young voters. The author concludes that the electoral potential of NSDAP had not been exhausted by the July elections of 1932, and the Nazis lost voices in November 1932 not just in several lands, but nationwide due to the drop of voters’ turnout. Among NSDAP supporters, perhaps, the share of workers was less than among SPD or KPG voters, and the share of peasants less that among the Centre Party or the right-wing parties, but the number of these NSDAP voters in absolute terms was too big to deny their role in the results of 1928-1933’s elections. The analysis of these election campaigns confirms that NSDAP successfully “saddled” protest and young voters, however, these groups alone were not enough to provide the party such an electoral support that made it dominant. Nazis managed to create “a huge national front” opposed to “right” and “labor” parties and to replace all class slogans. That is why young voters (under 30 years and the most active voters (age groups from 30 to 45 years in all social classes voted for NSDAP, thus ensuring the Nazi Party such an incredible success.

Six Values Never to Silence: Jewish Perspectives on Nazi Medical Professionalism

Science.gov (United States)

Kolman, Jacob M.; Miller, Susan M.

2018-01-01

An ideological case study based on medical profession norms during the Third Reich will be used to exemplify the importance of diversity in the manifestations of professional ethics. The German professional medical community banned their Jewish colleagues from treating German citizens. This included legally mandated employment discrimination and outright censure which led to a professional ethic devoid of diverse voices. While the escalation to the T-4 program and medicalized genocide was influenced by many causes, the intentional, ethnocentric-based exclusion of voices was an important contributing element to the chronicled degradation of societal mores. For illustration, six core Jewish values—life, peace, justice, mercy, scholarship, and sincerity of intention—will be detailed for their potential to inspire health-care professionals to defend and protect minorities and for readers to think critically about the role of medical professionalism in Third Reich society. The Jewish teachings highlight the inherent professional obligations physicians have toward their patients in contrast to the Third Reich’s corruption of patient-centered professionalism. More fundamentally, juxtaposing Jewish and Nazi teachings exposes the loss of perspective when a profession’s identity spurns diversity. To ensure respect for persons in all vulnerable minorities, the first step is addressing professional inclusion of minority voices. PMID:29406846

Six Values Never to Silence: Jewish Perspectives on Nazi Medical Professionalism

Directory of Open Access Journals (Sweden)

Jacob M. Kolman

2018-01-01

Full Text Available An ideological case study based on medical profession norms during the Third Reich will be used to exemplify the importance of diversity in the manifestations of professional ethics. The German professional medical community banned their Jewish colleagues from treating German citizens. This included legally mandated employment discrimination and outright censure which led to a professional ethic devoid of diverse voices. While the escalation to the T-4 program and medicalized genocide was influenced by many causes, the intentional, ethnocentric-based exclusion of voices was an important contributing element to the chronicled degradation of societal mores. For illustration, six core Jewish values—life, peace, justice, mercy, scholarship, and sincerity of intention—will be detailed for their potential to inspire health-care professionals to defend and protect minorities and for readers to think critically about the role of medical professionalism in Third Reich society. The Jewish teachings highlight the inherent professional obligations physicians have toward their patients in contrast to the Third Reich’s corruption of patient-centered professionalism. More fundamentally, juxtaposing Jewish and Nazi teachings exposes the loss of perspective when a profession’s identity spurns diversity. To ensure respect for persons in all vulnerable minorities, the first step is addressing professional inclusion of minority voices.

Six Values Never to Silence: Jewish Perspectives on Nazi Medical Professionalism.

Science.gov (United States)

Kolman, Jacob M; Miller, Susan M

2018-01-29

An ideological case study based on medical profession norms during the Third Reich will be used to exemplify the importance of diversity in the manifestations of professional ethics. The German professional medical community banned their Jewish colleagues from treating German citizens. This included legally mandated employment discrimination and outright censure which led to a professional ethic devoid of diverse voices. While the escalation to the T-4 program and medicalized genocide was influenced by many causes, the intentional, ethnocentric-based exclusion of voices was an important contributing element to the chronicled degradation of societal mores. For illustration, six core Jewish values-life, peace, justice, mercy, scholarship, and sincerity of intention-will be detailed for their potential to inspire health-care professionals to defend and protect minorities and for readers to think critically about the role of medical professionalism in Third Reich society. The Jewish teachings highlight the inherent professional obligations physicians have toward their patients in contrast to the Third Reich's corruption of patient-centered professionalism. More fundamentally, juxtaposing Jewish and Nazi teachings exposes the loss of perspective when a profession's identity spurns diversity. To ensure respect for persons in all vulnerable minorities, the first step is addressing professional inclusion of minority voices.

Residual stress in spin-cast polyurethane thin films

Energy Technology Data Exchange (ETDEWEB)

Zhang, Hong; Zhang, Li, E-mail: lizhang@mae.cuhk.edu.hk [Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong, Shatin N.T., Hong Kong (China); Chow Yuk Ho Technology Centre for Innovative Medicine, The Chinese University of Hong Kong, Shatin N.T., Hong Kong (China)

2015-01-19

Residual stress is inevitable during spin-casting. Herein, we report a straightforward method to evaluate the residual stress in as-cast polyurethane thin films using area shrinkage measurement of films in floating state, which shows that the residual stress is independent of radial location on the substrate and decreased with decreasing film thickness below a critical value. We demonstrate that the residual stress is developed due to the solvent evaporation after vitrification during spin-casting and the polymer chains in thin films may undergo vitrification at an increased concentration. The buildup of residual stress in spin-cast polymer films provides an insight into the size effects on the nature of polymer thin films.

Comparing Road-Kill Datasets from Hunters and Citizen Scientists in a Landscape Context

Directory of Open Access Journals (Sweden)

Florian Heigl

2016-10-01

Full Text Available Road traffic has severe effects on animals, especially when road-kills are involved. In many countries, official road-kill data are provided by hunters or police; there are also road-kill observations reported by citizen scientists. The aim of the current study was to test whether road-kill reports by hunters stem from similar landscapes than those reported by citizen scientists. We analysed the surrounding landscapes of 712 road-kill reportings of European hares in the province of Lower Austria. Our data showed that road-killed hares reported both by hunters and citizens are predominantly surrounded by arable land. No difference of hedges and solitary trees could be found between the two datasets. However, significant differences in landcover classes and surrounding road networks indicate that hunters’ and citizen scientists’ data are different. Hunters reported hares from landscapes with significantly higher percentages of arable land, and greater lengths of secondary roads. In contrast, citizens reported hares from landscapes with significantly higher percentages of urban or industrial areas and greater lengths of motorways, primary roads, and residential roads. From this we argue that hunters tend to report data mainly from their hunting areas, whereas citizens report data during their daily routine on the way to/from work. We conclude that a citizen science approach is an important source for road-kill data when used in addition to official data with the aim of obtaining an overview of road-kill events on a landscape scale.

The "Demetrios": Trotskyists, Peronist Nazis?

Directory of Open Access Journals (Sweden)

Juan Pedro Denaday

2013-06-01

Full Text Available The “Encuadramiento” of Peronist Youth was one of the most important militant groups of boiling political youths during the second half of the 1960s and the first of the 1970s. A political and intellectual experience that was absent in most of the historiography of the period, since mid-2012 have appeared the first studies. The “Demetrios” defined their actions inside of what was called "objective and doctrinal loyalty" to General Peron, thus enabling us to locate them within "orthodox" peronism, on a path similar to the Iron Guard. However, its origins and certain theoretical-political formulations made them receive diferent nicknames that, in the militant jargon, went from the "troskos" to "hitlerites". In this paper we analyze this political career focusing on the ideological aspects. To do this we examined their origins of transition from Trotskyism to Peronism, its peculiar considerations about the nazi phenomenon and its political and ideological location in 1973. That year was a key moment of definitions within the Peronist Youth, which included a debate and a dispute with the revolutionary tendency on the meaning of "national socialism" publicly endorsed by Perón in the preceding years.

Hunter versus CIE color measurement systems for analysis of milk-based beverages.

Science.gov (United States)

Cheng, Ni; Barbano, David M; Drake, Mary Anne

2018-06-01

The objective of our work was to determine the differences in sensitivity of Hunter and International Commission on Illumination (CIE) methods at 2 different viewer angles (2 and 10°) for measurement of whiteness, red/green, and blue/yellow color of milk-based beverages over a range of composition. Sixty combinations of milk-based beverages were formulated (2 replicates) with a range of fat level from 0.2 to 2%, true protein level from 3 to 5%, and casein as a percent of true protein from 5 to 80% to provide a wide range of milk-based beverage color. In addition, commercial skim, 1 and 2% fat high-temperature, short-time pasteurized fluid milks were analyzed. All beverage formulations were HTST pasteurized and cooled to 4°C before analysis. Color measurement viewer angle (2 vs. 10°) had very little effect on objective color measures of milk-based beverages with a wide range of composition for either the Hunter or CIE color measurement system. Temperature (4, 20, and 50°C) of color measurement had a large effect on the results of color measurement in both the Hunter and CIE measurement systems. The effect of milk beverage temperature on color measurement results was the largest for skim milk and the least for 2% fat milk. This highlights the need for proper control of beverage serving temperature for sensory panel analysis of milk-based beverages with very low fat content and for control of milk temperature when doing objective color analysis for quality control in manufacture of milk-based beverages. The Hunter system of color measurement was more sensitive to differences in whiteness among milk-based beverages than the CIE system, whereas the CIE system was much more sensitive to differences in yellowness among milk-based beverages. There was little difference between the Hunter and CIE system in sensitivity to green/red color of milk-based beverages. In defining milk-based beverage product specifications for objective color measures for dairy product

Vervolging, verbanning en het nazi-regime in het tijdschrift Het fundament (1934-1940

Directory of Open Access Journals (Sweden)

Marianne Kröger

1999-06-01

Full Text Available Het socialistische maandblad Het fundament verscheen in de zes jaren voorafgaande aan de Tweede Wereldoorlog. Het tijdschrift besteedde opvallend veel aandacht aan de vluchtelingenstroom die na de machtsovername door Hitler vanuit Duitsland op gang was gekomen. Veel linkse Duitse intellectuelen, die in Nederland hun toevlucht zochten voor het nazi-regime, behoorden tot de medewerkers van Het fundament. Een eerste verkenning.

Nodular cast iron and casting monitoring

Directory of Open Access Journals (Sweden)

S. Pietrowski

2008-10-01

Full Text Available In this paper quality monitoring of nodular cast iron and casting made of it is presented. A control system of initial liquid cast iron to spheroidization, after spheroidization and inoculation with using of TDA method was shown. An application of an ultrasonic method to assessment of the graphite form and the metal matrix microstructure of castings was investigated.

Fiber-optic displacement sensors on the Hunters Trophy UGT impulse gauge experiments

Energy Technology Data Exchange (ETDEWEB)

Green, R.E.L.; Poutiatine, A.I.

1995-03-01

As part of a program to develop gauges for measurement of various mechanical properties in hostile environments, the authors fielded purely optical displacement sensors at the ends of long fiber-optic cables as supplements to the regular displacement sensors of four impulse gauges fielded as part of a materials study on the Hunters Trophy underground effects test at the Nevada Test Site. These fiber-optic sensor systems and their performance on the Hunters Trophy test are described in this report.

Targeting hunter distribution based on host resource selection and kill sites to manage disease risk.

Science.gov (United States)

Dugal, Cherie J; van Beest, Floris M; Vander Wal, Eric; Brook, Ryan K

2013-10-01

Endemic and emerging diseases are rarely uniform in their spatial distribution or prevalence among cohorts of wildlife. Spatial models that quantify risk-driven differences in resource selection and hunter mortality of animals at fine spatial scales can assist disease management by identifying high-risk areas and individuals. We used resource selection functions (RSFs) and selection ratios (SRs) to quantify sex- and age-specific resource selection patterns of collared (n = 67) and hunter-killed (n = 796) nonmigratory elk (Cervus canadensis manitobensis) during the hunting season between 2002 and 2012, in southwestern Manitoba, Canada. Distance to protected area was the most important covariate influencing resource selection and hunter-kill sites of elk (AICw = 1.00). Collared adult males (which are most likely to be infected with bovine tuberculosis (Mycobacterium bovis) and chronic wasting disease) rarely selected for sites outside of parks during the hunting season in contrast to adult females and juvenile males. The RSFs showed selection by adult females and juvenile males to be negatively associated with landscape-level forest cover, high road density, and water cover, whereas hunter-kill sites of these cohorts were positively associated with landscape-level forest cover and increasing distance to streams and negatively associated with high road density. Local-level forest was positively associated with collared animal locations and hunter-kill sites; however, selection was stronger for collared juvenile males and hunter-killed adult females. In instances where disease infects a metapopulation and eradication is infeasible, a principle goal of management is to limit the spread of disease among infected animals. We map high-risk areas that are regularly used by potentially infectious hosts but currently underrepresented in the distribution of kill sites. We present a novel application of widely available data to target hunter distribution based on host resource

Salinity and resource management in the Hunter Valley

Energy Technology Data Exchange (ETDEWEB)

Creelman, R.A.; Cooke, R.; Simons, M. [RA Creelman & Associates (Australia)

1995-08-01

If excess water salinity is to be managed in the Hunter Valley, its causes and behaviour must be understood. Although Hunter Valley hydrology, hydrogeology and hydrogeochemistry require further study, there is now enough information available to begin the development of both temporal and spatial models as valley management tools. Currently the Department of Water Resources is developing a model known as Integrated Water Quality and Quantity Model (IQQM). IQQM which includes a salinity module is essentially a surface water simulation model. It wll enable testing of alternate management and operation policies such as the salinity property rights trading scheme recently introduced by the EPA to manage salt release from coal mines and power stations. An overview is presented of the progress made to date on the salinity module for IQQM, and an outline is given of the geological and hydrogeochemical concepts that have been assembled to support the salinity module of IQQM. 17 refs., 3 figs., 1 tab.

Casting Technology.

Science.gov (United States)

Wright, Michael D.; And Others

1992-01-01

Three articles discuss (1) casting technology as it relates to industry, with comparisons of shell casting, shell molding, and die casting; (2) evaporative pattern casting for metals; and (3) high technological casting with silicone rubber. (JOW)

perceptions and adaptations of beekeepers and honey hunters

African Journals Online (AJOL)

Prof. Adipala Ekwamu

honey sector (i.e. honey hunters) to climate change are, however, not adequately explored. The objective of .... The statistical software SPSS Version 16 was used for this purpose. ... content analysis is an effort of interpretation, that balances ... FORM. Discontinue. N o = 0 ; Yes = 1. ±. Creditavability. CRED. Discontinue. N.

Injury and Illness Among Deer Hunters

OpenAIRE

McRae, Shelagh M.

1989-01-01

General practice and out-patient emergency records for a five-year period were reviewed for injuries and illnesses that occurred during the week of deer rifle hunting on Manitoulin Island. Of 65 hunters who were identified, most had lacerations secondary to knife injuries. There were two deaths (one shooting and one in a motor vehicle accident), and 19 persons required hospitalization. More than half of these serious accidents occurred on the weekends immediately preceding or following the hu...

Project CHECO Southeast Asia Report. OV-1/AC-119 Hunter-Killer Team

Science.gov (United States)

1972-10-10

between Phan Rang, Phu Cat , and Danang in order to provide best coverage of the Vietnamese conflict. -- On 16 February 1970, three AC -ll9Ks and 70...SOUTHEAST ASIA D D DDiv AY/XDOSQA I OV-1/ AC -119 " i IWB I HUNTER-KILLER TEAM 19’.1’ CONTINUING REPORT CLASSIFIED Ey 7AFIDOOC DOWNGRADE TjU SECRET...xamination of C urrent, 0 per’tions I~ I fF!lr T I TII TIIII I OV=1/ AC -119 HUNTER-KILLER TEAMI 1 10 OCTOBER 1972 HQ PACAF Directorate of Operations

Ethical acceptability of recreational hunting - does the motive of the hunter matter?

DEFF Research Database (Denmark)

Gamborg, Christian; Jensen, Frank Søndergaard; Sandøe, Peter

2016-01-01

Recreational hunting can be a way of taking responsibility for acquiring one’s own meat. However, many recreational hunters focus instead on hunting as a hobby or sport. This distinction, between two rather different motives for hunting, is relevant to the activity’s moral justifiability. The pub......Recreational hunting can be a way of taking responsibility for acquiring one’s own meat. However, many recreational hunters focus instead on hunting as a hobby or sport. This distinction, between two rather different motives for hunting, is relevant to the activity’s moral justifiability...

Solidification and casting

CERN Document Server

Cantor, Brian

2002-01-01

INDUSTRIAL PERSPECTIVEDirect chillcasting of aluminium alloysContinuous casting of aluminium alloysContinuous casting of steelsCastings in the automotive industryCast aluminium-silicon piston alloysMODELLING AND SIMULATIONModelling direct chill castingMold filling simulation of die castingThe ten casting rulesGrain selection in single crystal superalloy castingsDefects in aluminium shape castingPattern formation during solidificationPeritectic solidificationSTRUCTURE AND DEFECTSHetergeneous nucleation in aluminium alloysCo

Inoculation Effects of Cast Iron

Directory of Open Access Journals (Sweden)

E. Fraś

2012-12-01

Full Text Available The paper presents a solidification sequence of graphite eutectic cells of A and D types, as well as globular and cementite eutectics. The morphology of eutectic cells in cast iron, the equations for their growth and the distances between the graphite precipitations in A and D eutectic types were analyzed. It is observed a critical eutectic growth rate at which one type of eutectic transformed into another. A mathematical formula was derived that combined the maximum degree of undercooling, the cooling rate of cast iron, eutectic cell count and the eutectic growth rate. One type of eutectic structure turned smoothly into the other at a particular transition rate, transformation temperature and transformational eutectic cell count. Inoculation of cast iron increased the number of eutectic cells with flake graphite and the graphite nodule count in ductile iron, while reducing the undercooling. An increase in intensity of inoculation caused a smooth transition from a cementite eutectic structure to a mixture of cementite and D type eutectic structure, then to a mixture of D and A types of eutectics up to the presence of only the A type of eutectic structure. Moreover, the mechanism of inoculation of cast iron was studied.

Radium issues at Hunters Point Annex

International Nuclear Information System (INIS)

Dean, S.M.

1994-01-01

Radium was a common source of illumination used in numerous instruments and gauges for military equipment prior to 1970. As a result of its many military applications radium 226 is now a principle radionuclide of concern at military base closures sites throughout the United States. This is an overview of the site characterization strategy employed and a potential site remediation technology being considered at a radium contaminated landfill at Hunters Point Annex, a former U.S. Navy shipyard in San Francisco, California

Comparing Road-Kill Datasets from Hunters and Citizen Scientists in a Landscape Context

OpenAIRE

Florian Heigl; Carina R. Stretz; Wolfgang Steiner; Franz Suppan; Thomas Bauer; Gregor Laaha; Johann G. Zaller

2016-01-01

Road traffic has severe effects on animals, especially when road-kills are involved. In many countries, official road-kill data are provided by hunters or police; there are also road-kill observations reported by citizen scientists. The aim of the current study was to test whether road-kill reports by hunters stem from similar landscapes than those reported by citizen scientists. We analysed the surrounding landscapes of 712 road-kill reportings of European hares in the province of Lower Aust...

Bainite obtaining in cast iron with carbides castings

Directory of Open Access Journals (Sweden)

S. Pietrowski

2010-01-01

Full Text Available In these paper the possibility of upper and lower bainite obtaining in cast iron with carbides castings are presented. Conditions, when in cast iron with carbides castings during continuous free air cooling austenite transformation to upper bainite or its mixture with lower bainte proceeds, have been given. A mechanism of this transformation has been given, Si, Ni, Mn and Mo distribution in the eutectic cell has been tested and hardness of tested castings has been determined.

Comparison of marginal accuracy of castings fabricated by conventional casting technique and accelerated casting technique: an in vitro study.

Science.gov (United States)

Reddy, S Srikanth; Revathi, Kakkirala; Reddy, S Kranthikumar

2013-01-01

Conventional casting technique is time consuming when compared to accelerated casting technique. In this study, marginal accuracy of castings fabricated using accelerated and conventional casting technique was compared. 20 wax patterns were fabricated and the marginal discrepancy between the die and patterns were measured using Optical stereomicroscope. Ten wax patterns were used for Conventional casting and the rest for Accelerated casting. A Nickel-Chromium alloy was used for the casting. The castings were measured for marginal discrepancies and compared. Castings fabricated using Conventional casting technique showed less vertical marginal discrepancy than the castings fabricated by Accelerated casting technique. The values were statistically highly significant. Conventional casting technique produced better marginal accuracy when compared to Accelerated casting. The vertical marginal discrepancy produced by the Accelerated casting technique was well within the maximum clinical tolerance limits. Accelerated casting technique can be used to save lab time to fabricate clinical crowns with acceptable vertical marginal discrepancy.

Radiographic Co-60 in component of heavy equipment casting

International Nuclear Information System (INIS)

Djoli Soembogo, Harun Al Rasyid R dan Namad Sianta

2016-01-01

The application of radiography using isotope Co-60 source has been used on component of heavy equipment such as component of heavy equipment casting. Components of heavy equipment casting made through metal casting of carbon steel. This study tried applying digital radiography are using isotope Co-60 sources and using scanning positive film media of Epson V700 for digitization results of conventional radiographic films. This radiography is using film AGFA D7 and Fuji 100 to obtain a contrast medium, medium sensitivity and image quality is good. The purpose radiographic Co-60 at a component of heavy equipment casting is detecting indications of the shape and type casting defects of component of heavy equipment casting thus fit for use. Radiographic test of Co-60 has been carried out on component of heavy equipment casting with single wall single image method and the results of radiographic films digitization using scanning positive film media of Epson V700 with observation parameters casting defects. Time exposure of Co-60 radiation was 10 and 15 minutes hours for metal castings of carbon steel for thickness 20.00-50.00 mm by using activity 30.05 Ci and the perpendicular distance to the source of the film is 820 mm. Scanner positive film results in the form of digital radiography which allow for the transfer of digital data or digital computerized data storage. Radiographic test results on component of heavy equipment casting with single wall single image method produce the parameter casting defect of component of heavy equipment casting in position of critical area is found shrinkage that should be repaired and in position of safety area is not found defect indication so casting defect of component of heavy equipment casting are not acceptable according to standards referenced. (author)

Melting and casting of FeAl-based cast alloy

Energy Technology Data Exchange (ETDEWEB)

Sikka, V.K. [Oak Ridge National Lab., TN (United States); Wilkening, D. [Columbia Falls Aluminum Co., Columbia Falls, MT (United States); Liebetrau, J.; Mackey, B. [AFFCO, L.L.C., Anaconda, MT (United States)

1998-11-01

The FeAl-based intermetallic alloys are of great interest because of their low density, low raw material cost, and excellent resistance to high-temperature oxidation, sulfidation, carburization, and molten salts. The applications based on these unique properties of FeAl require methods to melt and cast these alloys into complex-shaped castings and centrifugal cast tubes. This paper addresses the melting-related issues and the effect of chemistry on the microstructure and hardness of castings. It is concluded that the use of the Exo-Melt{trademark} process for melting and the proper selection of the aluminum melt stock can result in porosity-free castings. The FeAl alloys can be melted and cast from the virgin and revert stock. A large variation in carbon content of the alloys is possible before the precipitation of graphite flakes occurs. Titanium is a very potent addition to refine the grain size of castings. A range of complex sand castings and two different sizes of centrifugal cast tubes of the alloy have already been cast.

Numerical simulation and optimization of Al alloy cylinder body by low pressure die casting

Directory of Open Access Journals (Sweden)

Mi Guofa

2008-05-01

Full Text Available Shrinkage defects can be formed easily at Critical location during low pressure die casting (LPDC of aluminum alloy cylinder body. It has harmful effect on the products. Mold fi lling and solidifi cation process of a cylinder body was simulated by using of Z-CAST software. The casting method was improved based on the simulation results. In order to create effective feeding passage, the structure of casting was modifi ed by changing the location of strengthening ribs at the bottom, without causing any adverse effect on the part’s performance. Inserting copper billet at suitable location of the die is a valid way to create suitable solidifi cation sequence that is benefi cial to the feeding. Using these methods, the shrinkage defect was completely eliminated at the critical location.

Did Raw Material Shortages Decide World War Two? New Data for the Example of Nazi Rubber Supplies

Directory of Open Access Journals (Sweden)

Paul Ferdinand Schmelzing

2017-06-01

Full Text Available Despite a well-established literature on the economics of World War Two, to this day reliable statistics on overall raw material supplies for Nazi Germany are lacking. The operations of shell companies, the special de jure status of occupied areas, and the Wehrmacht practice to “live off the land” have led to a significant underestimation of de facto resource endowments of the Third Reich. For the example of rubber—one of the prime “scarce war commodities”—this article demonstrates the extent and sources of deficiencies, and offers new data. On this basis, and in contrast to recent arguments that view raw materials as a “basic constraint” of the German economy, it is shown that surprisingly comfortable supplies existed between December 1941 and May 1944, during which Nazi-controlled Europe seemed ready to allow a realization of Hitler’s ‘Lebensraum’ designs. The failure to realize those designs originated in military setbacks—which subsequently impacted economic performance as a secondary effect.

Undergraduate Planet Hunters: Tools and Results

Science.gov (United States)

Buzasi, Derek L.; Carboneau, Lindsey; Ferrell, Laura; Green, Gilbert; Kaiser, Maya; Kreke, Kira; Lundy, Samantha; Merritt, William; Passino, Matlin; Paxton, Harrison; Podaril, Alexandria; Stansfield, Alexis

2018-06-01

One student "Honors Experience" option at Florida Gulf Coast University is a research experience, and we have developed a "Planet Hunters" course to provide an astronomical research track that satisfies that requirement. Students spend the first semester learning astronomical background and exoplanet detection techniques, while the second semester is primarily devoted to planet searches in K2 data using student-oriented software tools developed specifically for the task. In this poster, we illustrate those tools and show results obtained by class participants during this years experience.

Maltreatment of people with serious mental illness in the early 20th century: a focus on Nazi Germany and eugenics in America.

Science.gov (United States)

Fischer, Bernard A

2012-12-01

Prejudice and stigma against people with mental illness can be seen throughout history. The worst instance of this prejudice was connected to the rise of the eugenics movement in the early 20th century. Although the Nazi German T-4 program of killing people with mental illness was the most egregious culmination of this philosophy, the United States has its own dark eugenics history-nearing a slippery slope all too similar to that of the Nazis. Mental health care clinicians need to examine this period to honor the memory of the victims of eugenics and to guarantee that nothing like this will ever happen again.

Much Ado about Something? James Bryant Conant, Harvard University, and Nazi Germany in the 1930s

Science.gov (United States)

Urban, Wayne J.; Smith, Marybeth

2015-01-01

This paper discusses the actions of noted Harvard University president James Bryant Conant, taken in regard to the Nazi government in Germany, from the time of Conant's becoming president of Harvard University in 1933 to the time of the widespread pogrom in Germany of 9-10 November 1938, known as Kristallnacht. Conant's attitudes and actions…

Characterization of fold defects in AZ91D and AE42 magnesium alloy permanent mold castings

International Nuclear Information System (INIS)

Bichler, L.; Ravindran, C.

2010-01-01

Casting premium-quality magnesium alloy components for aerospace and automotive applications poses unique challenges. Magnesium alloys are known to freeze rapidly prior to filling a casting cavity, resulting in misruns and cold shuts. In addition, melt oxidation, solute segregation and turbulent metal flow during casting contribute to the formation of fold defects. In this research, formation of fold defects in AZ91D and AE42 magnesium alloys cast via the permanent mold casting process was investigated. Computer simulations of the casting process predicted the development of a turbulent metal flow in a critical casting region with abrupt geometrical transitions. SEM and light optical microscopy examinations revealed the presence of folds in this region for both alloys. However, each alloy exhibited a unique mechanism responsible for fold formation. In the AZ91D alloy, melt oxidation and velocity gradients in the critical casting region prevented fusion of merging metal front streams. In the AE42 alloy, limited solubility of rare-earth intermetallic compounds in the α-Mg phase resulted in segregation of Al 2 RE particles at the leading edge of a metal front and created microstructural inhomogeneity across the fold.

Use of freeze-casting in advanced burner reactor fuel design

Energy Technology Data Exchange (ETDEWEB)

Lang, A. L.; Yablinsky, C. A.; Allen, T. R. [Dept. of Engineering Physics, Univ. of Wisconsin Madison, 1500 Engineering Drive, Madison, WI 53711 (United States); Burger, J.; Hunger, P. M.; Wegst, U. G. K. [Thayer School of Engineering, Dartmouth College, 8000 Cummings Hall, Hanover, NH 03755 (United States)

2012-07-01

This paper will detail the modeling of a fast reactor with fuel pins created using a freeze-casting process. Freeze-casting is a method of creating an inert scaffold within a fuel pin. The scaffold is created using a directional solidification process and results in open porosity for emplacement of fuel, with pores ranging in size from 300 microns to 500 microns in diameter. These pores allow multiple fuel types and enrichments to be loaded into one fuel pin. Also, each pore could be filled with varying amounts of fuel to allow for the specific volume of fission gases created by that fuel type. Currently fast reactors, including advanced burner reactors (ABR's), are not economically feasible due to the high cost of operating the reactors and of reprocessing the fuel. However, if the fuel could be very precisely placed, such as within a freeze-cast scaffold, this could increase fuel performance and result in a valid design with a much lower cost per megawatt. In addition to competitive costs, freeze-cast fuel would also allow for selective breeding or burning of actinides within specific locations in fast reactors. For example, fast flux peak locations could be utilized on a minute scale to target specific actinides for transmutation. Freeze-cast fuel is extremely flexible and has great potential in a variety of applications. This paper performs initial modeling of freeze-cast fuel, with the generic fast reactor parameters for this model based on EBR-II. The core has an assumed power of 62.5 MWt. The neutronics code used was Monte Carlo N-Particle (MCNP5) transport code. Uniform pore sizes were used in increments of 100 microns. Two different freeze-cast scaffold materials were used: ceramic (MgO-ZrO{sub 2}) and steel (SS316L). Separate models were needed for each material because the freeze-cast ceramic and metal scaffolds have different structural characteristics and overall porosities. Basic criticality results were compiled for the various models

Tape casting and partial melting of Bi-2212 thick films

Energy Technology Data Exchange (ETDEWEB)

Buhl, D.; Lang, T.; Heeb, B. [Nichtmetallische Werkstoffe, Zuerich (Switzerland)] [and others

1994-12-31

To produce Bi-2212 thick films with high critical current densities tape casting and partial melting is a promising fabrication method. Bi-2212 powder and organic additives were mixed into a slurry and tape casted onto glass by the doctor blade tape casting process. The films were cut from the green tape and partially molten on Ag foils during heat treatment. We obtained almost single-phase and well-textured films over the whole thickness of 20 {mu}m. The orientation of the (a,b)-plane of the grains were parallel to the substrate with a misalignment of less than 6{degrees}. At 77K/OT a critical current density of 15`000 A/cm{sup 2} was reached in films of the dimension 1cm x 2cm x 20{mu}m (1{mu}V/cm criterion, resistively measured). At 4K/OT the highest value was 350`000 A/cm{sup 2} (1nV/cm criterion, magnetically measured).

Targeting hunter distribution based on host resource selection and kill sites to manage disease risk

DEFF Research Database (Denmark)

Dugal, Cherie; van Beest, Floris; Vander Wal, Eric

2013-01-01

Endemic and emerging diseases are rarely uniform in their spatial distribution or prevalence among cohorts of wildlife. Spatial models that quantify risk-driven differences in resource selection and hunter mortality of animals at fine spatial scales can assist disease management by identifying high-risk...... areas and individuals. We used resource selection functions (RSFs) and selection ratios (SRs) to quantify sex- and age-specific resource selection patterns of collared (n = 67) and hunter-killed (n = 796) nonmigratory elk (Cervus canadensis manitobensis) during the hunting season between 2002 and 2012...... juvenile males and hunter-killed adult females. In instances where disease infects a metapopulation and eradication is infeasible, a principle goal of management is to limit the spread of disease among infected animals. We map high-risk areas that are regularly used by potentially infectious hosts...

Medicinal and ethnoveterinary remedies of hunters in Trinidad

Directory of Open Access Journals (Sweden)

Georges Karla

2001-11-01

Full Text Available Abstract Background Ethnomedicines are used by hunters for themselves and their hunting dogs in Trinidad. Plants are used for snakebites, scorpion stings, for injuries and mange of dogs and to facilitate hunting success. Results Plants used include Piper hispidum, Pithecelobium unguis-cati, Bauhinia excisa, Bauhinia cumanensis, Cecropia peltata, Aframomum melegueta, Aristolochia rugosa, Aristolochia trilobata, Jatropha curcas, Jatropha gossypifolia, Nicotiana tabacum, Vernonia scorpioides, Petiveria alliacea, Renealmia alpinia, Justicia secunda, Phyllanthus urinaria,Phyllanthus niruri,Momordica charantia, Xiphidium caeruleum, Ottonia ovata, Lepianthes peltata, Capsicum frutescens, Costus scaber, Dendropanax arboreus, Siparuma guianensis, Syngonium podophyllum, Monstera dubia, Solanum species, Eclipta prostrata, Spiranthes acaulis, Croton gossypifolius, Barleria lupulina, Cola nitida, Acrocomia ierensis (tentative ID. Conclusion Plant use is based on odour, and plant morphological characteristics and is embedded in a complex cultural context based on indigenous Amerindian beliefs. It is suggested that the medicinal plants exerted a physiological action on the hunter or his dog. Some of the plants mentioned contain chemicals that may explain the ethnomedicinal and ethnoveterinary use. For instance some of the plants influence the immune system or are effective against internal and external parasites. Plant baths may contribute to the health and well being of the hunting dogs.

Medicinal and ethnoveterinary remedies of hunters in Trinidad.

Science.gov (United States)

Lans, C; Harper, T; Georges, K; Bridgewater, E

2001-01-01

Ethnomedicines are used by hunters for themselves and their hunting dogs in Trinidad. Plants are used for snakebites, scorpion stings, for injuries and mange of dogs and to facilitate hunting success. Plants used include Piper hispidum, Pithecelobium unguis-cati, Bauhinia excisa, Bauhinia cumanensis, Cecropia peltata, Aframomum melegueta, Aristolochia rugosa, Aristolochia trilobata, Jatropha curcas, Jatropha gossypifolia, Nicotiana tabacum, Vernonia scorpioides, Petiveria alliacea, Renealmia alpinia, Justicia secunda, Phyllanthus urinaria,Phyllanthus niruri,Momordica charantia, Xiphidium caeruleum, Ottonia ovata, Lepianthes peltata, Capsicum frutescens, Costus scaber, Dendropanax arboreus, Siparuma guianensis, Syngonium podophyllum, Monstera dubia, Solanum species, Eclipta prostrata, Spiranthes acaulis, Croton gossypifolius, Barleria lupulina, Cola nitida, Acrocomia ierensis (tentative ID). Plant use is based on odour, and plant morphological characteristics and is embedded in a complex cultural context based on indigenous Amerindian beliefs. It is suggested that the medicinal plants exerted a physiological action on the hunter or his dog. Some of the plants mentioned contain chemicals that may explain the ethnomedicinal and ethnoveterinary use. For instance some of the plants influence the immune system or are effective against internal and external parasites. Plant baths may contribute to the health and well being of the hunting dogs.

Intergroup aggression in chimpanzees and war in nomadic hunter-gatherers: evaluating the chimpanzee model.

Science.gov (United States)

Wrangham, Richard W; Glowacki, Luke

2012-03-01

Chimpanzee and hunter-gatherer intergroup aggression differ in important ways, including humans having the ability to form peaceful relationships and alliances among groups. This paper nevertheless evaluates the hypothesis that intergroup aggression evolved according to the same functional principles in the two species-selection favoring a tendency to kill members of neighboring groups when killing could be carried out safely. According to this idea chimpanzees and humans are equally risk-averse when fighting. When self-sacrificial war practices are found in humans, therefore, they result from cultural systems of reward, punishment, and coercion rather than evolved adaptations to greater risk-taking. To test this "chimpanzee model," we review intergroup fighting in chimpanzees and nomadic hunter-gatherers living with other nomadic hunter-gatherers as neighbors. Whether humans have evolved specific psychological adaptations for war is unknown, but current evidence suggests that the chimpanzee model is an appropriate starting point for analyzing the biological and cultural evolution of warfare.

Estimating the mercury exposure dose in a population of migratory bird hunters in the St. Lawrence River region, Quebec, Canada

International Nuclear Information System (INIS)

Duchesne, J.-F.; Levesque, B.; Gauvin, Denis; Braune, Birgit; Gingras, Suzanne; Dewailly, E.

2004-01-01

St. Lawrence River hunters (Quebec, Canada) are exposed to the pollutants, especially mercury, that contaminate birds and fish. However, the health risks of this have remained unclear because of a lack of information about the hunters' duck, geese, and sportfish consumption habits. A nutritional survey was set up to characterize waterfowl and sportfish consumption in St. Lawrence River duck hunters and to estimate their daily exposure to mercury. During the winter of 2000, 512 hunters selected from the Canadian Wildlife Service database completed a self-administered questionnaire. Daily exposure to contaminants was measured using data from the Canadian Wildlife Service (waterfowl) and available data on St. Lawrence River sportfish. The annual average consumption was 7.5 meals of ducks and geese and 8.7 meals of sportfish. The daily exposure to mercury related to waterfowl consumption was below the Canadian tolerable daily intake (TDI) of 0.47 μg/kg body wt/day for all participants. The daily mercury intake associated with fish consumption was greater than the TDI in 2 duck hunters. The daily exposure to mercury was higher than the TDI in 4 participants when both waterfowl and fish consumption were combined. Our results suggest that fish consumption (especially freshwater fish) represents the main source of exposure to pollutants in duck hunters

Firewood, food and human niche construction: the potential role of Mesolithic hunter-gatherers in actively structuring Scotland's woodlands

Science.gov (United States)

Bishop, Rosie R.; Church, Mike J.; Rowley-Conwy, Peter A.

2015-01-01

Over the past few decades the potential role of Mesolithic hunter-gatherers in actively constructing their own niches, through the management of wild plants, has frequently been discussed. It is probable that Mesolithic hunter-gatherers systematically exploited specific woodland resources for food and fuel and influenced the 'natural' abundance or distribution of particular species within Mesolithic environments. Though there has been considerable discussion of the pollen evidence for potential small-scale human-woodland manipulation in Mesolithic Scotland, the archaeobotanical evidence for anthropogenic firewood and food selection has not been discussed in this context. This paper assesses the evidence for the active role of Mesolithic hunter-gatherer communities in systematically exploiting and managing woodlands for food and fuel in Scotland. While taphonomic factors may have impacted on the frequency of specific species in archaeobotanical assemblages, it is suggested that hunter-gatherers in Mesolithic Scotland were systematically using woodland plants, and in particular hazel and oak, for food and fuel. It is argued that the pollen evidence for woodland management is equivocal, but hints at the role of hunter-gatherers in shaping the structure of their environments, through the maintenance or creation of woodland clearings for settlement or as part of vegetation management strategies. It is proposed that Mesolithic hunter-gatherers may have actively contributed to niche construction and that the systematic use of hazel and oak as a fuel may reflect the deliberate pruning of hazel trees to increase nut-yields and the inadvertent - or perhaps deliberate - coppicing of hazel and oak during greenwood collection.

Fibreglass Total Contact Casting, Removable Cast Walkers, and Irremovable Cast Walkers to Treat Diabetic Neuropathic Foot Ulcers: A Health Technology Assessment

Science.gov (United States)

Costa, Vania; Tu, Hong Anh; Wells, David; Weir, Mark; Holubowich, Corinne; Walter, Melissa

2017-01-01

Background Diabetic neuropathic foot ulcers are a risk factor for lower leg amputation. Many experts recommend offloading with fibreglass total contact casting, removable cast walkers, and irremovable cast walkers as a way to treat these ulcers. Methods We completed a health technology assessment, which included an evaluation of clinical benefits and harms, value for money, and patient preferences for offloading devices. We performed a systematic literature search on August 17, 2016, to identify randomized controlled trials that compared fibreglass total contact casting, removable cast walkers, and irremovable cast walkers with other treatments (offloading or non-offloading) in patients with diabetic neuropathic foot ulcers. We developed a decision-analytic model to assess the cost-effectiveness of fibreglass total contact casting, removable cast walkers, and irremovable cast walkers, and we conducted a 5-year budget impact analysis. Finally, we interviewed people with diabetes who had lived experience with foot ulcers, asking them about the different offloading devices and the factors that influenced their treatment choices. Results We identified 13 randomized controlled trials. The evidence suggests that total contact casting, removable cast walkers, and irremovable cast walkers are beneficial in the treatment of neuropathic, noninfected foot ulcers in patients with diabetes but without severe peripheral arterial disease. Compared to removable cast walkers, ulcer healing was improved with total contact casting (moderate quality evidence; risk difference 0.17 [95% confidence interval 0.00–0.33]) and irremovable cast walkers (low quality evidence; risk difference 0.21 [95% confidence interval 0.01–0.40]). We found no difference in ulcer healing between total contact casting and irremovable cast walkers (low quality evidence; risk difference 0.02 [95% confidence interval −0.11–0.14]). The economic analysis showed that total contact casting and irremovable

Fundación Book Hunters: Atrévete a experimentar con la lectura

OpenAIRE

Cruz Mejía, Fernanda

2017-01-01

La fundación Book Hunters es una organización sin ánimo de lucro que busca fortalecer la relación de la lectura en los niños desde temprana edad, involucrando a la comunidad y promoviendo el entendimiento del entorno que rodea hoy en día la infancia. El equipo considera que, para lograr los objetivos es necesario transformar el significado ha perseguido a la lectura durante años, es decir, para Book Hunters leer va más allá de tomar un libro e involucrarse en la historia, en cambio, el si...

Radioactive caesium in hunters and their families

Energy Technology Data Exchange (ETDEWEB)

Aagren, G; Bergman, R [Natonal Defence Research Establishment, Umeaa (Sweden); Drottz-Sjoeberg, B M [Center for Risk Research, Stockholm (Sweden); Enander, A [National Defence Research Establishment, Karlstad (Sweden); Johansson, K J [Swedish Univ. of Agricultural Sciences, Uppsala (Sweden)

1995-12-01

We have measured the whole-body content of radiocesium in men and women in households, where at least one member is a hunter. Hunter families live to a great extent on forest products, such as mushrooms, berries and meat from game. Measurements were performed in two areas in northern Sweden and in three areas in the middle part of Sweden with deposition levels between 7 to 80 kBq/m{sup 2}. The average whole body content of {sup 137}Cs varied between 0.3 to 1.9 kBq for women and 0.6 to 4.7 kBq for men, depending on the deposition level. Each individual in the measured group was also asked to fill in questionnaire and a food diary to provide complementary information of, e.g., food intake and other life conditions. The single dietary factor most clearly related to whole-body content in these groups is the intake of meat from moose. The best regression model with variables from the questionnaire explained 60% of the variance in the whole-body content of {sup 137}Cs in the measurement group. Some of the variables in this model were deposition level, sex, rate of intake and estimated consumption of moose meat and estimated amount of bilberries in the fridge. 6 refs, 5 figs, 14 tabs.

Radioactive caesium in hunters and their families

International Nuclear Information System (INIS)

Aagren, G.; Bergman, R.; Drottz-Sjoeberg, B.M.; Enander, A.; Johansson, K.J.

1995-12-01

We have measured the whole-body content of radiocesium in men and women in households, where at least one member is a hunter. Hunter families live to a great extent on forest products, such as mushrooms, berries and meat from game. Measurements were performed in two areas in northern Sweden and in three areas in the middle part of Sweden with deposition levels between 7 to 80 kBq/m 2 . The average whole body content of 137 Cs varied between 0.3 to 1.9 kBq for women and 0.6 to 4.7 kBq for men, depending on the deposition level. Each individual in the measured group was also asked to fill in questionnaire and a food diary to provide complementary information of, e.g., food intake and other life conditions. The single dietary factor most clearly related to whole-body content in these groups is the intake of meat from moose. The best regression model with variables from the questionnaire explained 60% of the variance in the whole-body content of 137 Cs in the measurement group. Some of the variables in this model were deposition level, sex, rate of intake and estimated consumption of moose meat and estimated amount of bilberries in the fridge. 6 refs, 5 figs, 14 tabs

Reducing Lead on the Landscape: Anticipating Hunter Behavior in Absence of a Free Nonlead Ammunition Program.

Directory of Open Access Journals (Sweden)

Loren Chase

Full Text Available Lead is a neurotoxin that has been documented to affect many forms of wildlife, and has been identified as a limiting factor in a population of California Condors in Northern Arizona. The Arizona Game and Fish Department provides vouchers for free nonlead ammunition to hunters selected to hunt within the distribution of California Condors, with the intention of having fewer lead-laden offal piles available to California Condors. Although wildlife agencies may reasonably assume voucher programs motivate hunters into choosing nonlead ammunition, the lead reduction efforts attributable to the voucher program has not been empirically quantified. Our intention was to compare a control group of hunters to a treatment group of hunters within California Condor occupied areas. Both groups received educational materials regarding the deleterious effects of lead, but the treatment group also received a voucher for a free initial box of ammunition. About half of the control group used nonlead ammunition, compared to about three-fourths of the treatment group. Prominent barriers to adoption of nonlead ammunition included a general difficulty of obtaining it, obtaining it in the desired caliber, and its costliness. Frequently mentioned motivations for using nonlead was the exhortation to use it by the Department, and the desire to aid California Condor recovery by hunters. The disparate compliance rates found herein confirm and quantify the success of nonlead ammunition voucher programs, but underscore the importance of working to increase the supply of nonlead ammunition with the end of facilitating its procurement and reducing its cost.

Investment casting: parameters, application and recent development

International Nuclear Information System (INIS)

Zaid, A.I.O.

2007-01-01

Investment casting process, also referred to as the lost wax method and as precision casting, has been known for more than 6000 years. However, industry paid little attention to the process until the urgent military demands of World War 1 overtaxed the machine tool industry and short cuts were then needed to provide finished tools and precision parts, avoiding time-consuming in machining and assembly. The use of the process for the production of commercial casting has grown in the second half of the 20th century. The process is highly flexible and can handle great variety of parts which are difficult or even not possible to be produced by forging or other casting methods. In this paper, the investment casting process, its applications, advantages and limitations together with the parameters affecting it as related to pattern material, cluster, slurry and molten metal are given and discussed. Furthermore, the recent developments in the process particularly in manufacturing parts made of superalloys e.g nickel-base alloys are given and discussed. The striking fact that the process has advanced further in the last 60 years than it has in the previous 6000 years ensures that in the coming years of this century development in the process and its application will continue to advance in the interest of achieving higher quality and precision which can meet the critical performance standards being imposed. (author)

Diagnosis of Hunter's syndrome carriers; radioactive sulphate incorporation into fibroblasts in the presence of fructose 1-phosphate

International Nuclear Information System (INIS)

Toennesen, T.; Lykkelund, C.; Guettler, F.

1982-01-01

Mutual correction of co-cultivated fibroblasts from patients with Hunter's and Hurler's syndrome could be inhibited by either fructose 1-phosphate or mannose 6-phosphate. In the presence of fructose 1-phosphate a 50% mixture of fibroblasts from a patient with Hunter's syndrome and a normal homozygous individual showed an increased 35 S-sulphate incorporation into acid mucopolysaccharides. When fibroblast cultures from one obligate and two possible carriers of Hunter's syndrome were tested for 35 S-sulphate incorporation, the cultures showed either twice the normal 35 S-sulphate incorporation into acid mucopolysaccharides in the presence of fructose 1-phosphate or an abnormally high incorporation in the presence as well as in the absence of the sugar phosphate. (orig.)

Hunters syndrom og hørenedsaettelse

DEFF Research Database (Denmark)

Kiaer, Eva Kirkegaard; Møller, Troels Reinholdt; Wetke, Randi

2010-01-01

A 30 month-old boy with delayed language development was referred to the Department of Audiology in Aarhus. At the time of referral he had had 19 cases of acute otitis media and had been tubulated four times. Furthermore, the boy had not developed according to age in several respects: his motor...... functions and language were delayed, and he made audible respiratory sounds and was obviously nasally congested. The boy was referred for further investigations at the Department of Paediatrics. The tests showed that the boy suffered from Hunter Syndrome (MPSII) and he underwent relevant treatment....

Data Package for Secondary Waste Form Down-Selection-Cast Stone

International Nuclear Information System (INIS)

Serne, R. Jeffrey; Westsik, Joseph H.

2011-01-01

Available literature on Cast Stone and Saltstone was reviewed with an emphasis on determining how Cast Stone and related grout waste forms performed in relationship to various criteria that will be used to decide whether a specific type of waste form meets acceptance criteria for disposal in the Integrated Disposal Facility (IDF) at Hanford. After the critical review of the Cast Stone/Saltstone literature, we conclude that Cast Stone is a good candidate waste form for further consideration. Cast stone meets the target IDF acceptance criteria for compressive strength, no free liquids, TCLP leachate are below the UTS permissible concentrations and leach rates for Na and Tc-99 are suiteably low. The cost of starting ingredients and equipment necessary to generate Cast Stone waste forms with secondary waste streams are low and the Cast Stone dry blend formulation can be tailored to accommodate variations in liquid waste stream compositions. The database for Cast Stone short-term performance is quite extensive compared to the other three candidate waste solidification processes. The solidification of liquid wastes in Cast Stone is a mature process in comparison to the other three candidates. Successful production of Cast Stone or Saltstone has been demonstrated from lab-scale monoliths with volumes of cm3 through m3 sized blocks to 210-liter sized drums all the way to the large pours into vaults at Savannah River. To date over 9 million gallons of low activity liquid waste has been solidified and disposed in concrete vaults at Savannah River.

Data Package for Secondary Waste Form Down-Selection—Cast Stone

Energy Technology Data Exchange (ETDEWEB)

Serne, R. Jeffrey; Westsik, Joseph H.

2011-09-05

Available literature on Cast Stone and Saltstone was reviewed with an emphasis on determining how Cast Stone and related grout waste forms performed in relationship to various criteria that will be used to decide whether a specific type of waste form meets acceptance criteria for disposal in the Integrated Disposal Facility (IDF) at Hanford. After the critical review of the Cast Stone/Saltstone literature, we conclude that Cast Stone is a good candidate waste form for further consideration. Cast stone meets the target IDF acceptance criteria for compressive strength, no free liquids, TCLP leachate are below the UTS permissible concentrations and leach rates for Na and Tc-99 are suiteably low. The cost of starting ingredients and equipment necessary to generate Cast Stone waste forms with secondary waste streams are low and the Cast Stone dry blend formulation can be tailored to accommodate variations in liquid waste stream compositions. The database for Cast Stone short-term performance is quite extensive compared to the other three candidate waste solidification processes. The solidification of liquid wastes in Cast Stone is a mature process in comparison to the other three candidates. Successful production of Cast Stone or Saltstone has been demonstrated from lab-scale monoliths with volumes of cm3 through m3 sized blocks to 210-liter sized drums all the way to the large pours into vaults at Savannah River. To date over 9 million gallons of low activity liquid waste has been solidified and disposed in concrete vaults at Savannah River.

Control of cast iron and casts manufacturing by Inmold method

Directory of Open Access Journals (Sweden)

S. Pietrowski

2009-07-01

Full Text Available In this paper the usability of cast iron spheroidizing process in mould control by ATD method as well as by ultrasonic method were presented. Structure of instrumentation needed for control form performance of cast iron spheroidizing by Inmold method was illustrated. Author, pointed out that amount of magnesium master alloy should obtain 0,8 ÷ 1,0% of mass in form at all. Such quantity of preliminary alloy assure of obtain of nodular graphite in cast iron. In consequence of this, is reduce the cast iron liquidus temperature and decrease of recalescence temperature of graphite-eutectic crystallization in compare with initial cast iron. Control of casts can be carried out by ultrasonic method. In plain cast iron, ferritic-pearlitic microstructure is obtaining. Additives of 1,5% Cu ensure pearlitic structure.

The casting of western sculpture during the XIXth century: sand casting versus lost wax casting

NARCIS (Netherlands)

Beentjes, T.P.C.

2014-01-01

This paper will discuss research into bronze casting techniques as practiced during the XIXth and early XXth century. Both natural sand casting (fonte au sable naturel) and lost wax casting (fonte à la cire perdue) were employed during this period and sometimes rivalled for commissions. Before the

Effects of heat pipe cooling on permanent mold castings of aluminum alloys

International Nuclear Information System (INIS)

Zhang, C.; Mucciardi, F.; Gruzleski, J.E.

2002-01-01

The temperature distribution within molds is a critical parameter in determining the ultimate casting quality in permanent mold casting processes, so there is a considerable incentive to develop a more effective method of mold cooling. Based on this consideration, a novel, effective and controllable heat pipe has been successfully developed and used as a new method of permanent mold cooling. Symmetric step casting of A356 alloy have been produced in an experimental permanent mold made of H13 tool steel, which is cooled by such heat pipes. The experimental results show that heat pipes can provide extremely high cooling rates in permanent mold castings of aluminum. The dendrite arm spacing of A356 alloy is refined considerably, and porosity and shrinkage of the castings are redistributed by the heat pipe cooling. Moreover, the heat pipe can be used to determine the time when the air gap forms at the interface between the mold and the casting. The effect of heat pipe cooling on solidification time of castings of A356 alloy with different coating types is also discussed in this paper. (author)

Picturing anti-Semitism in the Nazi-occupied Netherlands : Anti-Jewish Stereotyping in a racist Second World War Comic Strip

NARCIS (Netherlands)

Ribbens, Kees

In 1942, the Dutch weekly magazine Volk en Vaderland, which propagated the political opinions of the Dutch National Socialists in the Nazi-occupied Netherlands, published a comic strip, “Rare, maar ware commentaren” (Odd, but true comments). In it, the illustrator, Peter Beekman (1911–1959) depicted

[Ernst Rüdin--a Swiss psychiatrist as the leader of Nazi psychiatry--the final solution as a goal].

Science.gov (United States)

Peters, U H

1996-09-01

The study of work and life of the Swiss-German psychiatrist Ernst Rüdin, honoured up to our time as "father of psychiatric genealogy", lead to different views. Rüdin early in his life became a racial fanatic, and as a propagandist for the purity of the "Germanic people" he constantly demanded preventive coercive measures against the reproduction of the mentally ill and other, in the racist's view, undesirable persons. With this objective in mind he started his psychiatric research. The results of Rüdin's monograph about the genetics of dementia precox do not withstand scientific criticism but confirmed his preexisting opinions. They served however as scientific reasoning for the forced sterilisation by the Nazis, for which Rüdin's comments were obligatory. The next step, to the holocaust of the mentally ill and the undesirable, was not only tacitly agreed with by Rüdin. Max Weber, Karl Jaspers and others realised at an early time the dangers arising from racial hygienics and voiced their warnings in a plain language. The surviving victims are still waiting for compensation.

Rapidly cast crystalline thin sheet materials

International Nuclear Information System (INIS)

Warlimont, H.; Emmerich, K.

1986-01-01

The current state and progress of casting thin sheet and ribbons directly from the melt are reviewed. First, the solidification phenomena pertinent to the process are outlined. Subsequently, Fe-Si,l Fe-Si-Al, Fe-Nd-B, Ag-Cu-Ti, alloy steels, Ni superalloys and Si are treated as examples. Finally, the information available on process development is critically assessed

Determining casting defects in near-net shape casting aluminum parts by computed tomography

Science.gov (United States)

Li, Jiehua; Oberdorfer, Bernd; Habe, Daniel; Schumacher, Peter

2018-03-01

Three types of near-net shape casting aluminum parts were investigated by computed tomography to determine casting defects and evaluate quality. The first, second, and third parts were produced by low-pressure die casting (Al-12Si-0.8Cu-0.5Fe-0.9Mg-0.7Ni-0.2Zn alloy), die casting (A356, Al-7Si-0.3Mg), and semi-solid casting (A356, Al-7Si-0.3Mg), respectively. Unlike die casting (second part), low-pressure die casting (first part) significantly reduced the formation of casting defects (i.e., porosity) due to its smooth filling and solidification under pressure. No significant casting defect was observed in the third part, and this absence of defects indicates that semi-solid casting could produce high-quality near-net shape casting aluminum parts. Moreover, casting defects were mostly distributed along the eutectic grain boundaries. This finding reveals that refinement of eutectic grains is necessary to optimize the distribution of casting defects and reduce their size. This investigation demonstrated that computed tomography is an efficient method to determine casting defects in near-net shape casting aluminum parts.

Contrasts in livelihoods and protein intake between commercial and subsistence bushmeat hunters in two villages on Bioko Island, Equatorial Guinea.

Science.gov (United States)

Vega, María Grande; Carpinetti, Bruno; Duarte, Jesús; Fa, John E

2013-06-01

Across West and Central Africa, wildlife provides a source of food and income. We investigated the relation between bushmeat hunting and household wealth and protein consumption in 2 rural communities in Bioko Island, Equatorial Guinea. One village was dedicated to commercial hunting, the other trapped game primarily for food. We tested whether commercial-hunter households were nutritionally advantaged over subsistence-hunter households due to their higher income from the bushmeat trade and greater access to wild-animal protein. We conducted bushmeat-offtake surveys in both villages (captures by hunters and carcasses arriving to each village). Mammals (including threatened primates: black colobus [Colobus satanas], Preussi's guenon [Allochrocebus preussi], and russet-eared guenon [Cercopithecus erythrotis]), birds, and reptiles were hunted. The blue duiker (Philantomba monticola), giant pouched rat (Cricetomys emini), and brush-tailed porcupine (Atherurus africanus) contributed almost all the animal biomass hunted, consumed, or sold in both villages. Monkeys and Ogilbyi's duikers (Cephalophus ogilbyi) were hunted only by commercial hunters. Commercial hunters generated a mean of US$2000/year from bushmeat sales. Households with commercial hunters were on average wealthier, generated more income, spent more money on nonessential goods, and bought more products they did not grow. By contrast, households with subsistence hunters spent less on market items, spent more on essential products, and grew more of their own food. Despite these differences, average consumption of vegetable protein and domestic meat and bushmeat protein did not differ between villages. Our results highlight the importance of understanding the socioeconomic and nutritional context of commercial and subsistence bushmeat hunting to correctly interpret ways of reducing their effects on threatened species and to enable the sustainable offtake of more productive taxa. © 2013 Society for Conservation

Neutron radiography inspection of investment castings

International Nuclear Information System (INIS)

Richards, W.J.; Barrett, J.R.; Springgate, M.E.; Shields, K.C.

2004-01-01

Investment casting, also known as the lost wax process, is a manufacturing method employed to produce near net shape metal articles. Traditionally, investment casting has been used to produce structural titanium castings for aero-engine applications with wall thickness less than 1 in (2.54 cm). Recently, airframe manufacturers have been exploring the use of titanium investment casting to replace components traditionally produced from forgings. Use of titanium investment castings for these applications reduces weight, cost, lead time, and part count. Recently, the investment casting process has been selected to produce fracture critical structural titanium airframe components. These airframe components have pushed the traditional inspection techniques to their physical limits due to cross sections on the order of 3 in (7.6 cm). To overcome these inspection limitations, a process incorporating neutron radiography (n-ray) has been developed. In this process, the facecoat of the investment casting mold material contains a cocalcined mixture of yttrium oxide and gadolinium oxide. The presence of the gadolinium oxide, allows for neutron radiographic imaging (and eventual removal and repair) of mold facecoat inclusions that remain within these thick cross sectional castings. Probability of detection (POD) studies have shown a 3x improvement of detecting a 0.050x0.007 in 2 (1.270x0.178 mm 2 ) inclusion of this cocalcined material using n-ray techniques when compared to the POD using traditional X-ray techniques. Further, it has been shown that this n-ray compatible mold facecoat material produces titanium castings of equal metallurgical quality when compared to the traditional materials. Since investment castings can be very large and heavy, the neutron radiography facilities at the University of California, Davis McClellan Nuclear Radiation Center (UCD/MNRC) were used to develop the inspection techniques. The UCD/MNRC has very unique facilities that can handle large parts

“Heute gehört uns die Galaxie”: Music and historical credibility in Wolfenstein: The New Order’s Nazi dystopia

Directory of Open Access Journals (Sweden)

Fede Peñate Domínguez

2017-12-01

Full Text Available This article addresses the use of “Nazi rock ‘n’ roll” in Wolfenstein: The New Order (2014 as a strategy to reinforce a historically selective sense of verisimilitude of the game’s dystopian setting. In W:TNO’s production, cover replicas of US popular music classics from the second half of the 20th century were composed in ‘Nazi mode’, with German themes and language, with the intent of creating a sense of stereotyped and mythicized knowledge of World War II that also imagined an outcome of the war in which the Nazis had won. The diegetic embedding of songs in this style could have supported the game’s atmosphere in a way that is comparable to the use of licensed works in games such as Grand Theft Auto and Fallout. However, the soundtrack composition was constrained by controversies around the representation of the Third Reich in computer games, a factor that also limited the role of the songs within the game world. The narrative potential of the original score thus remained untapped, as the songs were used mostly for marketing purposes. This paper highlights how music partly contributed to the creation of a myth-historical alternate timeline of post-WW2, and how the use of these songs could have turned the game’s story into a more complex and multifaceted discourse than what production allowed, contributing to a nuanced representation of Nazism, a theme that has remained controversial in the medium of the videogame.

Anatomical practice at Göttingen University since the Age of Enlightenment and the fate of victims from Wolfenbüttel prison under Nazi rule.

Science.gov (United States)

Ude-Koeller, Susanne; Knauer, Wilfried; Viebahn, Christoph

2012-06-01

This report briefly summarises anatomical practice at Göttingen University from its founding in 1737 until the Nazi period and gives a detailed account of how Nazi death penalty legislation and execution practice at Wolfenbüttel prison influenced the decision-making of the anatomists in charge at that time. Problems in the procurement of corpses, encountered almost continuously throughout Europe since the broad introduction of dissection into medical training in the early 18th century, were absent in Göttingen during periods of overt progress in anatomical sciences, e.g. under Albrecht von Haller (in office 1736-1753) and Jacob Henle (1853-1885), and at times when existing regulations were rigorously enforced by the authorities (1814-1851). Ample availability of corpses in the wake of more than 600 executions in Wolfenbüttel between 1935 and 1945 was curtailed only by transportation fuel shortages and resulted in the dissection of more than 200 Nazi victim corpses in the Göttingen anatomy course. Apparently, neither individual offers of voluntary body donation (dating from 1932 to 1937 and published here as the earliest documents of this kind), nor the strong tradition of high-level anatomical research, nor even the awareness of the University's Age of Enlightenment origin, prevented the unethical use of corpses of Nazi victims for medical teaching. The Göttingen example may add "historical and moral detachment" under unusual political and wartime pressures to the "clinical and emotional detachment" thought to prevail amongst anatomy personnel (Hildebrandt, in this issue); together with the other reports it calls for all anatomists to bear in mind their ever present ethical obligations in respect to activities involving the use of corpses, both in medical schools and in the public domain. Copyright © 2012 Elsevier GmbH. All rights reserved.

Project CHECO Southeast Asia Report. OV-1/AC-119 Hunter-Killer Team

National Research Council Canada - National Science Library

Sexton, Richard R; Hodgson, William M

1972-01-01

Hunter-Killer operations were but a logical extension of the resourceful thinking behind the development of gunships as a solution to some of the tactical problems of the unique war in Southeast Asia...

Marginal Accuracy of Castings Fabricated with Ringless Casting Investment System and Metal Ring Casting Investment System: A Comparative Study.

Science.gov (United States)

Kalavathi, M; Sachin, Bhuvana; Prasanna, B G; Shreeharsha, T V; Praveen, B; Ragher, Mallikarjuna

2016-02-01

The thermal expansion of the investment can be restricted by the metal casting ring because the thermal expansion of the ring is less than that of the investment. The ringless casting procedure is in use in clinical dentistry, though there is little scientific data to support its use in fixed partial dentures. In this study, marginal discrepancy of castings produced with the ringless casting technique and the conventional technique using the metal rings were compared. A total of 30 wax patterns were fabricated directly on a metal die. Optical stereomicroscope was used to measure the marginal discrepancy between the metal die and wax patterns. A total of 15 castings were invested using Bellavest T phosphate-bonded investment with the ringless technique and 15 were invested with the same investment with a metal ring; 30 castings were produced using a nickel-chromium ceramo-metal alloy. The internal surface of the castings was not modified and seated with finger pressure. The vertical marginal discrepancy was measured using an optical stereomicroscope at a magnification of 100x. The data obtained were statistically analyzed using students t-test (paired t-test and unpaired t-test). The castings of the ringless technique provided less vertical marginal discrepancy (240.56 ± 45.81 μ) than the castings produced with the conventional metal ring technique (281.98± 53.05 μ). The difference was statistically significant. The ringless casting technique had produced better marginal accuracy compared with conventional casting technique. Ringless casting system can be used routinely for clinical purpose.

Plastic-casting intrinsic-surface unique identifier (tag)

International Nuclear Information System (INIS)

Palm, R.G.; De Volpi, A.

1995-04-01

This report describes the development of an authenticated intrinsic-surf ace tagging method for unique- identification of controlled items. Although developed for control of items limited by an arms control treaty, this method has other potential applications to keep track of critical or high-value items. Each tag (unique-identifier) consists of the intrinsic, microscopic surface topography of a small designated area on a controlled item. It is implemented by making a baseline plastic casting of the designated tag area and usually placing a cover (for example, a bar-code label) over this area to protect the surface from environmental alteration. The plastic casting is returned to a laboratory and prepared for high-resolution scanning electron microscope imaging. Several images are digitized and stored for use as a standard for authentication of castings taken during future inspections. Authentication is determined by numerically comparing digital images. Commercially available hardware and software are used for this tag. Tag parameters are optimized, so unique casting images are obtained from original surfaces, and images obtained from attempted duplicate surfaces are detected. This optimization uses the modulation transfer function, a first principle of image analysis, to determine the parameters. Surface duplication experiments confirmed the optimization

Travelling Through Caste

OpenAIRE

Kumar, Raj

2016-01-01

With its peculiar caste system, India is considered the most stratified of all known societies in human history. This system is ‘peculiar’ as it divides human beings into higher and lower castes and this division is backed by certain religious sanctions based on the sociological concepts of ‘purity’ and ‘pollution’. While the higher caste is associated with ‘purity’, the lower caste is associated with ‘pollution’. The people of the lower castes are not allowed to undertake religious journeys ...

Sacrificing Steve: How I Killed the Crocodile Hunter

Directory of Open Access Journals (Sweden)

Luke Carman

2010-09-01

Full Text Available Bob Hodge and Vijay Mishra argue that the complex issues of illegitimacy at the core of Australian identity are repressed through a continual process of cyclical silencing, where traces of a shameful past are exorcised by a focus on images of a mythologised ‘legend’, embodied in characters such as 'The Man from Snowy River'. This article explores such a 'schizophrenic' cycle in relation to the life, death and resurrection of Steve 'Crocodile Hunter' Irwin.

Microstructural causes of negative creep in cast superalloys

International Nuclear Information System (INIS)

Frank, G.

1990-01-01

The dissertation examines by means of microstructural investigations and modelling calculations two types of superalloys: the nickel-base cast alloy IN 738 LC (γ'-hardened, containing MC and M 23 C 6 carbides), and the cobalt-base cast alloy FSX 414 (containing M 23 C 6 carbides, solid solution-hardened). The task was to determine the causes of microstructural volume contraction, in order to improve and facilitate explanation and extrapolation of the materials' long-term behaviour at high temperatures, and to derive if possible information on appropriate measures preventing negative creep, which may lead to critical damage of bolted joints, for instance. (orig./MM) [de

Caste and power

DEFF Research Database (Denmark)

Roy, Dayabati

2011-01-01

This paper explores the institution of caste and its operation in a micro-level village setting of West Bengal, an Indian state, where state politics at grass roots level is vibrant with functioning local self-government and entrenched political parties. This ethnographic study reveals that caste...... relations and caste identities have overarching dimensions in the day-to-day politics of the study villages. Though caste almost ceases to operate in relation to strict religious strictures, under economic compulsion the division of labour largely coincides with caste division. In the cultural......–ideological field, the concept of caste-hierarchy seems to continue as an influencing factor, even in the operation of leftist politics....

The abolition of 'the person' as a legal category in nazi philosophy of law

DEFF Research Database (Denmark)

Petersen, Lars Axel

2007-01-01

philosophy, the work of philosopher and professor of law, Karl Larenz (1903-1993), during the Nazi regime in Germany (1933-1945). Larenz and others strove to reform private law (Zivilrecht or bürgeriches Recht) in conformity with National Socialism. Central to that - racist, to be sure - project...... 1945. Extensive historical research exists on these philosophical ideas and their relationship to the jurisprudence, legislation, and legal practice during the Third Reich. However, I would like to use a periodical characterisation, with focus on Karl Larenz and his works, as a backdrop for discussing...

Apology, responsibility, memory. Coming to terms with Nazi medical crimes: the example of the Max Planck Society.

Science.gov (United States)

Sachse, Carola

2011-11-01

In June 2001, the then president of the Max Planck Society addressed a formal apology to survivors of Nazi medical crimes. Starting from this ritual of repentance, the paper examines the participants' diverse views of how to deal with the medical crimes of National Socialism. In comparison with the DGPPN, it asks about possibilities of going beyond historical retrospection to fulfil the imperative of remembrance.

Hide Tanning and Its Use in Taiga: The Case of the Orochen-Evenki Reindeer Herders and Hunters of Zabaikalye (East Siberia)

OpenAIRE

Donatas Brandišauskas

2010-01-01

This article documents the way in which the Orochen-Evenki hunters and herders in northern part of Zabaikalye tan hides and produce gear in the post-Soviet era. Here, I wish to present the argument that it is difficult to understand the reviving of hide tanning in remote villages and the taiga without understanding how hunters and herders in this region adapt to the unstable post-Soviet environment. I suggest that hunters and herders aim to maintain their autonomy from goods and resources imp...

Genetics as a modernization program: biological research at the Kaiser Wilhelm Institutes and the political economy of the Nazi State.

Science.gov (United States)

Gausemeier, Bernd

2010-01-01

During the Third Reich, the biological institutes of the Kaiser Wilhelm Society (KWG, Kaiser-Wilhelm-Gesellschaft) underwent a substantial reorganization and modernization. This paper discusses the development of projects in the fields of biochemical genetics, virus research, radiation genetics, and plant genetics that were initiated in those years. These cases exemplify, on the one hand, the political conditions for biological research in the Nazi state. They highlight how leading scientists advanced their projects by building close ties with politicians and science-funding organizations and companies. On the other hand, the study examines how the contents of research were shaped by, and how they contributed to, the aims and needs of the political economy of the Nazi system. This paper therefore aims not only to highlight basic aspects of scientific development under Nazism, but also to provide general insights into the structure of the Third Reich and the dynamics of its war economy.

Technological Aspects of Low-Alloyed Cast Steel Massive Casting Manufacturing

Directory of Open Access Journals (Sweden)

Szajnara J.

2013-12-01

Full Text Available In the paper authors have undertaken the attempt of explaining the causes of cracks net occurrence on a massive 3-ton cast steel casting with complex geometry. Material used for casting manufacturing was the low-alloyed cast steel with increased wear resistance modified with vanadium and titanium. The studies included the primary and secondary crystallization analysis with use of TDA and the qualitative and quantitative analysis of non-metallic inclusions.

Staging the Nazi Assault on Reason: Hanns Johst's "Schlageter" and the 'Theatre of Inner Experience'

OpenAIRE

Strobl, Gerwin

2005-01-01

Hanns Johst’s play Schlageter is generally regarded as the most successful piece of Nazi\\ud theatre. Following its first performance in the early months of the Third Reich, it dominated\\ud German theatrical life throughout 1933 and 1934. This has traditionally been regarded as\\ud evidence of the essential conformity of the Third Reich’s stage; yet since no other play\\ud achieved a similar prominence in the period, Gerwin Strobl finds that line of argument\\ud unconvincing, arguing that the suc...

Reducing the Incidence of Cast-related Skin Complications in Children Treated With Cast Immobilization.

Science.gov (United States)

Difazio, Rachel L; Harris, Marie; Feldman, Lanna; Mahan, Susan T

2017-12-01

Cast immobilization remains the mainstay of pediatric orthopaedic care, yet little is known about the incidence of cast-related skin complications in children treated with cast immobilization. The purposes of this quality improvement project were to: (1) establish a baseline rate of cast-related skin complications in children treated with cast immobilization, (2) identify trends in children who experienced cast-related skin complications, (3) design an intervention aimed at decreasing the rate of cast-related skin complications, and (4) determine the effectiveness of the intervention. A prospective interrupted time-series design was used to determine the incidence of cast-related skin complications overtime and compare the rates of skin complications before and after an intervention designed to decrease the incidence of cast-related heel complications. All consecutive patients who were treated with cast immobilization from September 2012 to September 2014 were included. A cast-related skin complications data collection tool was used to capture all cast-related skin complications. A high rate of heel events was noted in our preliminary analysis and an intervention was designed to decrease the rate of cast-related skin complications, including the addition of padding during casting and respective provider education. The estimated cast-related skin events rate for all patients was 8.9 per 1000 casts applied. The rate for the total preintervention sample was 13.6 per 1000 casts which decreased to 6.6 in the postintervention sample. When examining the heel-only group, the rate was 17.1 per 1000 lower extremity casts applied in the preintervention group and 6.8 in the postintervention group. Incorporating padding to the heel of lower extremity cast was an effective intervention in decreasing the incidence of cast-related skin complications in patients treated with cast immobilization. Level II.

Irradiation response of delta ferrite in as-cast and thermally aged cast stainless steel

Energy Technology Data Exchange (ETDEWEB)

Li, Zhangbo; Lo, Wei-Yang [Department of Materials Science and Engineering, Nuclear Engineering Program, University of Florida, Gainesville, FL 32611 (United States); Chen, Yiren [Nuclear Engineering Division, Argonne National Laboratory, Lemont, IL 60439 (United States); Pakarinen, Janne [Belgian Nuclear Research Center (SCK-CEN), Boeretang 200, B-2400 Mol (Belgium); Wu, Yaqiao [Department of Materials Science and Engineering, Boise State University, Boise, ID 83715 (United States); Center for Advanced Energy Studies, Idaho Falls, ID 83401 (United States); Allen, Todd [Engineering Physics Department, University of Wisconsin, Madison, WI 53706 (United States); Idaho National Laboratory, Idaho Falls, ID 83415 (United States); Yang, Yong, E-mail: yongyang@ufl.edu [Department of Materials Science and Engineering, Nuclear Engineering Program, University of Florida, Gainesville, FL 32611 (United States)

2015-11-15

To enable the life extension of Light Water Reactors (LWRs) beyond 60 years, it is critical to gain adequate knowledge for making conclusive predictions to assure the integrity of duplex stainless steel reactor components, e.g. primary pressure boundary and reactor vessel internal. Microstructural changes in the ferrite of thermally aged, neutron irradiated only, and neutron irradiated after being thermally aged cast austenitic stainless steels (CASS) were investigated using atom probe tomography. The thermal aging was performed at 400 °C for 10,000 h and the irradiation was conducted in the Halden reactor at ∼315 °C to 0.08 dpa (5.6 × 10{sup 19} n/cm{sup 2}, E > 1 MeV). Low dose neutron irradiation at a dose rate of 5 × 10{sup −9} dpa/s was found to induce spinodal decomposition in the ferrite of as-cast microstructure, and further to enhance the spinodal decomposition in the thermally aged cast alloys. Regarding the G-phase precipitates, the neutron irradiation dramatically increases the precipitate size, and alters the composition of the precipitates with increased, Mn, Ni, Si and Mo and reduced Fe and Cr contents. The results have shown that low dose neutron irradiation can further accelerate the degradation of ferrite in a duplex stainless steel at the LWR relevant condition.

Irradiation response of delta ferrite in as-cast and thermally aged cast stainless steel

International Nuclear Information System (INIS)

Li, Zhangbo; Lo, Wei-Yang; Chen, Yiren; Pakarinen, Janne; Wu, Yaqiao; Allen, Todd; Yang, Yong

2015-01-01

To enable the life extension of Light Water Reactors (LWRs) beyond 60 years, it is critical to gain adequate knowledge for making conclusive predictions to assure the integrity of duplex stainless steel reactor components, e.g. primary pressure boundary and reactor vessel internal. Microstructural changes in the ferrite of thermally aged, neutron irradiated only, and neutron irradiated after being thermally aged cast austenitic stainless steels (CASS) were investigated using atom probe tomography. The thermal aging was performed at 400 °C for 10,000 h and the irradiation was conducted in the Halden reactor at ∼315 °C to 0.08 dpa (5.6 × 10"1"9 n/cm"2, E > 1 MeV). Low dose neutron irradiation at a dose rate of 5 × 10"−"9 dpa/s was found to induce spinodal decomposition in the ferrite of as-cast microstructure, and further to enhance the spinodal decomposition in the thermally aged cast alloys. Regarding the G-phase precipitates, the neutron irradiation dramatically increases the precipitate size, and alters the composition of the precipitates with increased, Mn, Ni, Si and Mo and reduced Fe and Cr contents. The results have shown that low dose neutron irradiation can further accelerate the degradation of ferrite in a duplex stainless steel at the LWR relevant condition.

A study on the effects of artifacts on fatigue limit of ductile cast iron with ferritic structure

International Nuclear Information System (INIS)

Kim, Jin Hak; Kim, Min Gun

2000-01-01

In this study, fatigue tests were performed to examine the effects of micro drill hole on fatigue limit of as cast and Austempered Ductile cast Iron (ADI) using the rotary bending fatigue tester. As results, micro drill holes (diameter≤0.4mm) did not influence the fatigue limit of ADI, compared to annealed ductile cast iron; the critical defect size of crack initiation, in ADI was larger than as cast. If the √areas of micro drill hole and graphite nodule in ADI are comparable, crack initiates at the graphite nodule. When the ruggedness develops through austempering treatment process, microstructure on crack initiation at micro drill hole is tougher than that of as cast ductile cast iron

Preliminary assessment of channel stability and bed-material transport along Hunter Creek, southwestern Oregon

Science.gov (United States)

Jones, Krista L.; Wallick, J. Rose; O'Connor, Jim E.; Keith, Mackenzie K.; Mangano, Joseph F.; Risley, John C.

2011-01-01

This preliminary assessment of (1) bed-material transport in the Hunter Creek basin, (2) historical changes in channel condition, and (3) supplementary data needed to inform permitting decisions regarding instream gravel extraction revealed the following: Along the lower 12.4 km (kilometers) of Hunter Creek from its confluence with the Little South Fork Hunter Creek to its mouth, the river has confined and unconfined segments and is predominately alluvial in its lowermost 11 km. This 12.4-km stretch of river can be divided into two geomorphically distinct study reaches based primarily on valley physiography. In the Upper Study Reach (river kilometer [RKM] 12.4-6), the active channel comprises a mixed bed of bedrock, boulders, and smaller grains. The stream is confined in the upper 1.4 km of the reach by a bedrock canyon and in the lower 2.4 km by its valley. In the Lower Study Reach (RKM 6-0), where the area of gravel bars historically was largest, the stream flows over bed material that is predominately alluvial sediments. The channel alternates between confined and unconfined segments. The primary human activities that likely have affected bed-material transport and the extent and area of gravel bars are (1) historical and ongoing aggregate extraction from gravel bars in the study area and (2) timber harvest and associated road construction throughout the basin. These anthropogenic activities likely have varying effects on sediment transport and deposition throughout the study area and over time. Although assessing the relative effects of these anthropogenic activities on sediment dynamics would be challenging, the Hunter Creek basin may serve as a case study for such an assessment because it is mostly free of other alterations to hydrologic and geomorphic processes such as flow regulation, dredging, and other navigation improvements that are common in many Oregon coastal basins. Several datasets are available that may support a more detailed physical assessment

HiggsHunters - a citizen science project for ATLAS

CERN Document Server

Haas, Andrew; The ATLAS collaboration

2016-01-01

Since the launch of HiggsHunters.org in November 2014, citizen science volunteers have classified more than a million points of interest in images from the ATLAS experiment at the LHC. Volunteers have been looking for displaced vertices and unusual features in images recorded during LHC Run-1. We discuss the design of the project, its impact on the public, and the surprising results of how the human volunteers performed relative to the computer algorithms in identifying displaced secondary vertices.

JEFX 10 demonstration of Cooperative Hunter Killer UAS and upstream data fusion

Science.gov (United States)

Funk, Brian K.; Castelli, Jonathan C.; Watkins, Adam S.; McCubbin, Christopher B.; Marshall, Steven J.; Barton, Jeffrey D.; Newman, Andrew J.; Peterson, Cammy K.; DeSena, Jonathan T.; Dutrow, Daniel A.; Rodriguez, Pedro A.

2011-05-01

The Johns Hopkins University Applied Physics Laboratory deployed and demonstrated a prototype Cooperative Hunter Killer (CHK) Unmanned Aerial System (UAS) capability and a prototype Upstream Data Fusion (UDF) capability as participants in the Joint Expeditionary Force Experiment 2010 in April 2010. The CHK capability was deployed at the Nevada Test and Training Range to prosecute a convoy protection operational thread. It used mission-level autonomy (MLA) software applied to a networked swarm of three Raven hunter UAS and a Procerus Miracle surrogate killer UAS, all equipped with full motion video (FMV). The MLA software provides the capability for the hunter-killer swarm to autonomously search an area or road network, divide the search area, deconflict flight paths, and maintain line of sight communications with mobile ground stations. It also provides an interface for an operator to designate a threat and initiate automatic engagement of the target by the killer UAS. The UDF prototype was deployed at the Maritime Operations Center at Commander Second Fleet, Naval Station Norfolk to provide intelligence analysts and the ISR commander with a common fused track picture from the available FMV sources. It consisted of a video exploitation component that automatically detected moving objects, a multiple hypothesis tracker that fused all of the detection data to produce a common track picture, and a display and user interface component that visualized the common track picture along with appropriate geospatial information such as maps and terrain as well as target coordinates and the source video.

Experimental Tape Casting of Adjacently Graded Materials for Magnetic Refrigeration

DEFF Research Database (Denmark)

Bulatova, Regina

encompass modification of the entire tape caster into a multi chamber unit, establishment of the optimal operating parameters such as casting gap, speed, and slurry level in the tape caster reservoir, and elucidation of the impact of chamber partition design on the quality of the final tape. The second...... of the side-by-side tape casting technique: recognising critical parameters which affect the quality of a graded tape, shape and position of the interface area. Studied parameters can be divided into two categories: operational parameters and slurry formulation optimisation. The operational parameters...

Co-residence patterns in hunter-gatherer societies show unique human social structure.

Science.gov (United States)

Hill, Kim R; Walker, Robert S; Bozicević, Miran; Eder, James; Headland, Thomas; Hewlett, Barry; Hurtado, A Magdalena; Marlowe, Frank; Wiessner, Polly; Wood, Brian

2011-03-11

Contemporary humans exhibit spectacular biological success derived from cumulative culture and cooperation. The origins of these traits may be related to our ancestral group structure. Because humans lived as foragers for 95% of our species' history, we analyzed co-residence patterns among 32 present-day foraging societies (total n = 5067 individuals, mean experienced band size = 28.2 adults). We found that hunter-gatherers display a unique social structure where (i) either sex may disperse or remain in their natal group, (ii) adult brothers and sisters often co-reside, and (iii) most individuals in residential groups are genetically unrelated. These patterns produce large interaction networks of unrelated adults and suggest that inclusive fitness cannot explain extensive cooperation in hunter-gatherer bands. However, large social networks may help to explain why humans evolved capacities for social learning that resulted in cumulative culture.

The Effect of Shell Thickness, Insulation and Casting Temperature on Defects Formation During Investment Casting of Ni-base Turbine Blades

Directory of Open Access Journals (Sweden)

Raza M.

2015-12-01

Full Text Available Turbine blades have complex geometries with free form surface. Blades have different thickness at the trailing and leading edges as well as sharp bends at the chord-tip shroud junction and sharp fins at the tip shroud. In investment casting of blades, shrinkage at the tip-shroud and cord junction is a common casting problem. Because of high temperature applications, grain structure is also critical in these castings in order to avoid creep. The aim of this work is to evaluate the effect of different process parameters, such as, shell thickness, insulation and casting temperature on shrinkage porosity and grain size. The test geometry used in this study was a thin-walled air-foil structure which is representative of a typical hot-gas-path rotating turbine component. It was observed that, in thin sections, increased shell thickness helps to increase the feeding distance and thus avoid interdendritic shrinkage. It was also observed that grain size is not significantly affected by shell thickness in thin sections. Slower cooling rate due to the added insulation and steeper thermal gradient at metal mold interface induced by the thicker shell not only helps to avoid shrinkage porosity but also increases fill-ability in thinner sections.

Neo-Nazis Sympathizers on the Forums of the Romanian Online Publications

Directory of Open Access Journals (Sweden)

Elena-Irina Macovei

2013-08-01

Full Text Available The research aims to highlight how the forums of the Romanian online publications may often become spaces for right-wing extremist propaganda. The case study includes about 1.000 comments of the readers, expressed on the articles about a protest of several intellectuals against a TV program of the Romanian public Television (TVR, where Corneliu Zelea Codreanu, the founder of the Iron Guard, a Nazi organization created in 1927, was presented as a romantic hero. The results of the content analysis of comments revealed the stigmatizing themes, the stereotypes and the extremist ideas identified on the forums of these articles. In addition, the comparison between the electronic platforms of the publications showed the importance of their features and of the characteristics of audiences regarding the content of the comments.

AllerHunter: a SVM-pairwise system for assessment of allergenicity and allergic cross-reactivity in proteins.

Directory of Open Access Journals (Sweden)

Hon Cheng Muh

Full Text Available Allergy is a major health problem in industrialized countries. The number of transgenic food crops is growing rapidly creating the need for allergenicity assessment before they are introduced into human food chain. While existing bioinformatic methods have achieved good accuracies for highly conserved sequences, the discrimination of allergens and non-allergens from allergen-like non-allergen sequences remains difficult. We describe AllerHunter, a web-based computational system for the assessment of potential allergenicity and allergic cross-reactivity in proteins. It combines an iterative pairwise sequence similarity encoding scheme with SVM as the discriminating engine. The pairwise vectorization framework allows the system to model essential features in allergens that are involved in cross-reactivity, but not limited to distinct sets of physicochemical properties. The system was rigorously trained and tested using 1,356 known allergen and 13,449 putative non-allergen sequences. Extensive testing was performed for validation of the prediction models. The system is effective for distinguishing allergens and non-allergens from allergen-like non-allergen sequences. Testing results showed that AllerHunter, with a sensitivity of 83.4% and specificity of 96.4% (accuracy = 95.3%, area under the receiver operating characteristic curve AROC = 0.928+/-0.004 and Matthew's correlation coefficient MCC = 0.738, performs significantly better than a number of existing methods using an independent dataset of 1443 protein sequences. AllerHunter is available at (http://tiger.dbs.nus.edu.sg/AllerHunter.

Effect of cast steel production metallurgy on the emergence of casting defects

Directory of Open Access Journals (Sweden)

L. Čamek

2016-10-01

Full Text Available The paper documents metallurgical possibilities of high alloy cast steel production in open induction medium frequency furnaces and an electric arc furnace in a gravity die casting foundry. The observation was focused on the emergence of gas defects in steel castings. The content of gases achieved during the metallurgical processes was evaluated for every unit of the production equipment and the casting ladle before casting into disposable sand moulds. The sand mould area was considered to be constant. The aim was to evaluate the current metallurgical possibilities of affecting the content of gases in high alloy cast steel in the current technical conditions of the foundry.

SPRAY CASTING

OpenAIRE

SALAMCI, Elmas

2010-01-01

ABSTRACT This paper is designed to provide a basic review of spray casting. A brief overview of the historical development of spray  casting and the description of plant and equipment have been given. Following metallurgical characteristics of spray formed alloys, process parameters and solidification mechanism of spray deposition have been discussed in detail. Finally, microstructure and mechanical properties of the selected spray cast Al-Zn-Mg-Cu alloys have been presented and comp...

Die casting copper motor rotors: mold materials and processing for cost-effective manufacturing

Energy Technology Data Exchange (ETDEWEB)

Peters, D.T.; Cowie, J.G.; Brush, E.F. Jr.

2000-07-01

This project seeks to demonstrate mold materials for copper pressure die-casting that are cost-effective and practical for production use in die-casting copper motor rotors. The incorporation of die-cast copper for conductor bars and end rings of the induction motor in place of aluminum would result in attractive improvements in motor energy efficiency through reductions in motor losses ranging from 15% to 20%. Die-cast motor rotors are produced in aluminum today because rotor fabrication by pressure die-casting is an established practice. Lack of a durable and cost-effective mold material has been the technical barrier preventing manufacture of the die-cast copper rotor. This project tested H-13 steel die inserts that establish the baseline. Nickel-, tungsten-, and molybdenum-based high temperature alloys were extensively tested. Results indicate that substantially extended die life is possible using high temperature die materials, pre-heated and operated at elevated temperatures. Pre-heating and high operating temperatures were shown to be critical in extending the die life by decreasing the cyclic stresses associated with thermal expansion. Extended die life provides the opportunity for economically viable copper motor rotor die-casting. (orig.)

TECHNOLOGICAL PARAMETERS OF SLUGS CASTING OF GREY CAST IRON BY FROSTING

Directory of Open Access Journals (Sweden)

E. I. Marukovich

2009-01-01

Full Text Available The relation of geometrical parametres of casting with technological ones is shown. The monogram for definition of basic technological parametres of obtaining of castings by the method of continuously-cyclic iterative casting by freezing-up is presented.

Colour Metallography of Cast Iron - Chapter 3: Spheroidal Graphite Cast Iron (Ⅳ

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2010-11-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron. Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron, uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditional materials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

Colour Metallography of Cast Iron - Chapter 3: Spheroidal Graphite Cast Iron (Ⅰ

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2010-02-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron. Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron, uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditional materials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

Colour Metallography of Cast Iron - Chapter 4: Vermicular Graphite Cast Iron (Ⅱ

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2011-05-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron. Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron, uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditional materials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

Energy expenditure and activity among Hadza hunter-gatherers.

Science.gov (United States)

Pontzer, Herman; Raichlen, David A; Wood, Brian M; Emery Thompson, Melissa; Racette, Susan B; Mabulla, Audax Z P; Marlowe, Frank W

2015-01-01

Studies of total energy expenditure, (TEE; kcal/day) among traditional populations have challenged current models relating habitual physical activity to daily energy requirements. Here, we examine the relationship between physical activity and TEE among traditional Hadza hunter-gatherers living in northern Tanzania. Hadza adults were studied at two camps, with minimal intervention so as to monitor energy expenditure and activity during normal daily life. We measured daily walking distance and walking speed using wearable GPS units for 41 adults. For a subset of 30 adults, we measured TEE using doubly labeled water, three indices of work load (foraging return rate, maternal status, and number of dependent children), and urinary biomarkers of metabolic activity and stress (8-hydroxydeoxyguanosine, cortisol, and testosterone). Fat-free mass was the single strongest predictor of TEE among Hadza adults (r(2)  = 0.66, P < 0.001). Hadza men used greater daily walking distances and faster walking speeds compared with that of Hadza women, but neither sex nor any measure of physical activity or work load were correlated with TEE in analyses controlling for fat-free mass. Compared with developed, industrial populations, Hadza adults had similar TEE but elevated levels of metabolic stress as measured by 8-hydroxydeoxyguanosine. Our results indicate that daily physical activity may not predict TEE within traditional hunter-gatherer populations like the Hadza. Instead, adults with high levels of habitual physical activity may adapt by reducing energy allocation to other physiological activity. © 2015 Wiley Periodicals, Inc.

Effects of process variables on the properties of YBa2Cu3O(7-x) ceramics formed by investment casting

Science.gov (United States)

Hooker, M. W.; Taylor, T. D.; Leigh, H. D.; Wise, S. A.; Buckley, J. D.; Vasquez, P.; Buck, G. M.; Hicks, L. P.

1993-01-01

An investment casting process has been developed to produce net-shape, superconducting ceramics. In this work, a factorial experiment was performed to determine the critical process parameters for producing cast YBa2Cu3O7 ceramics with optimum properties. An analysis of variance procedure indicated that the key variables in casting superconductive ceramics are the particle size distribution and sintering temperature. Additionally, the interactions between the sintering temperature and the other process parameters (e.g., particle size distribution and the use of silver dopants) were also found to influence the density, porosity, and critical current density of the fired ceramics.

The national socialism of the group valhalla 88: construction of a nazi movement in Brazil

Directory of Open Access Journals (Sweden)

Guilherme Ignácio Franco de Andrade

2014-06-01

Full Text Available In this article, the racial issues present in the national-socialist ideology professed by the group Valhalla 88 are investigated. The primary element of Nazi ideology is Aryanism (eugenics, i.e., “race purification,” because the “chosen people” have the “right” to rule the world due to their “racial superiority” as understood by Adolf Hitler. The group Valhalla 88 seeks to spread national-socialist ideology, and the group’s interpretation of this ideology seeks to manipulate and adapt these ideas to provide a political alternative.

The deformation of wax patterns and castings in investment casting technology

Directory of Open Access Journals (Sweden)

A. Herman

2012-01-01

Full Text Available The dimensional accuracy of the final casting of Inconel alloy 738 LC is affected by many aspects. One of them is the choice of method and time of cooling wax model for precision investment casting. The main objective was to study the initial deformation of the complex shape of the casting of the rotor blades. Various approaches have been tested for cooling wax pattern. When wax models are cooling on the air, without clamping in jig for cooling, deviations from the ideal shape of the casting are very noticeable (up to 8 mm and most are in extreme positions of the model. When blade is cooled in fixing jig in water environment, the resulting deviations compared with cooling in air are significantly larger, sometimes up to 10 mm. This itself does not mean that the final shape of the casting is dimensionally more accurate with usage of wax models, which have deviations from the ideal position smaller. Another deformation occurs when shell mould is produced around wax pattern and furthermore deformations emerge while casting of blade is cooling. This paper demonstrates first steps in describing complex process of deformations of Inconel alloy blades produced with investment casting technology by comparing results from thermal imagery, simulations in foundry simulation software ProCAST 2010 and measurements from CNC scanning system Carl Zeiss MC 850. Conclusions are so far not groundbreaking, but it seems deformations of wax pattern and deformations of castings do in some cases cancel each other by having opposite directions. Describing entirely whole process of deformations will help increase precision of blade castings so that models at the beginning and blades in the end are the same.

The politics of choice: roles of the medical profession under Nazi rule.

Science.gov (United States)

Lekisch, K; McDonald, J H

1989-06-01

In 1933, when Adolf Hitler took power, the German medical community was faced with intense crisis and change. Because social processes become more clearly defined in times of crisis, the days of Nazi rule offer an excellent opportunity to examine health care and moral issues. This article describes historical events that illustrate physicians' and medical students' role in the political process. In addition, we detail four types of responses made by physicians and students: flight, conformism, individual resistance, and group resistance. We conclude that if the role of physicians is to aid and protect patients against disease or experimentation on humans, then he or she must maintain heightened political awareness in order to deal with social crises before they overwhelm any response.

Mortality, fertility, and the OY ratio in a model hunter-gatherer system.

Science.gov (United States)

White, Andrew A

2014-06-01

An agent-based model (ABM) is used to explore how the ratio of old to young adults (the OY ratio) in a sample of dead individuals is related to aspects of mortality, fertility, and longevity experienced by the living population from which the sample was drawn. The ABM features representations of rules, behaviors, and constraints that affect person- and household-level decisions about marriage, reproduction, and infant mortality in hunter-gatherer systems. The demographic characteristics of the larger model system emerge through human-level interactions playing out in the context of "global" parameters that can be adjusted to produce a range of mortality and fertility conditions. Model data show a relationship between the OY ratios of living populations (the living OY ratio) and assemblages of dead individuals drawn from those populations (the dead OY ratio) that is consistent with that from empirically known ethnographic hunter-gatherer cases. The dead OY ratio is clearly related to the mean ages, mean adult mortality rates, and mean total fertility rates experienced by living populations in the model. Sample size exerts a strong effect on the accuracy with which the calculated dead OY ratio reflects the actual dead OY ratio of the complete assemblage. These results demonstrate that the dead OY ratio is a potentially useful metric for paleodemographic analysis of changes in mortality and mean age, and suggest that, in general, hunter-gatherer populations with higher mortality, higher fertility, and lower mean ages are characterized by lower dead OY ratios. Copyright © 2014 Wiley Periodicals, Inc.

Fairy tales? Marion Jones, C.J. Hunter and the framing of doping in American newspapers

DEFF Research Database (Denmark)

Pfister, Gertrud Ursula; Gems, Gerald

2015-01-01

This article deals with the images, metaphors and narratives in the media coverage of doping in the United States. It presents a case study with a focus on Marion Jones, the most celebrated track athlete of the turn of the millennium, and her husband, C.J. Hunter, a shot put world champion...... under suspicion. At the same time, the 2000 Olympics can be considered a watershed in American anti-doping policy. The media portrayed Jones and Hunter as the Beauty and the Beast or Svengali and his victim, using a famous fairy tale and a well-known novel to capture attention, label the protagonists...

Direct Cast U-6Nb – 2017 Progress on Cylindrical Castings

Energy Technology Data Exchange (ETDEWEB)

Aikin, Jr., Robert M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-10-04

This report describes work to further develop a sound technical basis and best practices for mold design and process parameters for the Direct Casting of U-6wt%Nb components. One major challenge to the production of U-6Nb components is the propensity for niobium segregation during casting and solidification. This is especially true for cylindrical castings where the vertical side walls allow flotation of Nb resulting in severe inverse macrosegregation. In this work, a small (120 mm diameter by 180 mm tall) and large cylinder (250 mm diameter by 310 mm tall) are examined with a focus on reducing, or eliminating, niobium segregation. It is demonstrated that counter gravity casting (top-to-bottom solidification) can be used to minimize segregation in the small cylinder. Attempts to counter gravity cast the large cylinder were unsuccessful, in large part due to size limitations of the current furnace. A path forward for casting of the large cylinders is discussed.

Game meat consumption by hunters and their relatives: A probabilistic approach.

Science.gov (United States)

Sevillano Morales, Jesus; Moreno-Ortega, Alicia; Amaro Lopez, Manual Angel; Arenas Casas, Antonio; Cámara-Martos, Fernando; Moreno-Rojas, Rafael

2018-06-18

This study aimed to estimate the consumption of meat and products derived from hunting by the consumer population and, specifically, by hunters and their relatives. For this purpose, a survey was conducted on the frequency of consuming meat from the four most representative game species in Spain, two of big game, wild boar (Sus scrofa) and red deer (Cervus elaphus) and two of small game, rabbit (Oryctolagus cunulucus) and red partridge (Alectoris rufa), as well as of processed meat products (salami-type sausage) made from those big game species. The survey was carried out on 337 habitual consumers of these types of products (hunters and their relatives). The total mean game meat consumption, per capita in this population group, is 6.87 kg/person/year of meat and 8.57 kg/person/year if the processed meat products are also considered. Consumption of rabbit, red partridge, red deer and wild boar, individually, was 1.85, 0.82, 2.28 and 1.92 kg/person/year, respectively. It was observed that hunters generally registered a larger intake of game meat, this being statistically significant in the case of rabbit meat consumption. Using probabilistic methods, the meat consumption frequency distributions for each hunting species studied were estimated, as well as the products made from big game species and the total consumption both of meat by itself and that including the products made from it. The consumption frequency distributions were adjusted to exponential ones, verified by the test suitable for it according to Akaike Information Criterion, Bayesian Information Criterion, the Chi-Squared and Kolmogorov-Smirnov statistics. In addition, the consumption percentiles of the different distributions were obtained. The latter could be a good tool when making nutrition or contaminant studies since they permit the assessment of exposure to the compound in question.

Anodization of cast aluminium alloys produced by different casting methods

Directory of Open Access Journals (Sweden)

K. Labisz

2008-08-01

Full Text Available In this paper the usability of two casting methods, of sand and high pressure cast for the anodization of AlSi12 and AlSi9Cu3 aluminium cast alloys was investigated. With defined anodization parameters like electrolyte composition and temperature, current type and value a anodic alumina surface layer was produced. The quality, size and properties of the anodic layer was investigated after the anodization of the chosen aluminium cast alloys. The Alumina layer was observed used light microscope, also the mechanical properties were measured as well the abrasive wear test was made with using ABR-8251 equipment. The researches included analyze of the influence of chemical composition, geometry and roughness of anodic layer obtained on aluminum casts. Conducted investigations shows the areas of later researches, especially in the direction of the possible, next optimization anodization process of aluminum casting alloys, for example in the range of raising resistance on corrosion to achieve a suitable anodic surface layer on elements for increasing applications in the aggressive environment for example as materials on working building constructions, elements in electronics and construction parts in air and automotive industry.

Hide Tanning and Its Use in Taiga: The Case of the Orochen-Evenki Reindeer Herders and Hunters of Zabaikalye (East Siberia

Directory of Open Access Journals (Sweden)

Donatas Brandišauskas

2011-05-01

Full Text Available This article documents the way in which the Orochen-Evenki hunters and herders in northern part of Zabaikalye tan hides and produce gear in the post-Soviet era. Here, I wish to present the argument that it is difficult to understand the reviving of hide tanning in remote villages and the taiga without understanding how hunters and herders in this region adapt to the unstable post-Soviet environment. I suggest that hunters and herders aim to maintain their autonomy from goods and resources imported from cities, and, in spending little effort connecting with state powers in this way, securing their lives from socio-economic constraints.

Hide Tanning and Its Use in Taiga: The Case of the Orochen-Evenki Reindeer Herders and Hunters of Zabaikalye (East Siberia

Directory of Open Access Journals (Sweden)

Donatas Brandišauskas

2010-12-01

Full Text Available This article documents the way in which the Orochen-Evenki hunters and herders in northern part of Zabaikalye tan hides and produce gear in the post-Soviet era. Here, I wish to present the argument that it is difficult to understand the reviving of hide tanning in remote villages and the taiga without understanding how hunters and herders in this region adapt to the unstable post-Soviet environment. I suggest that hunters and herders aim to maintain their autonomy from goods and resources imported from cities, and, in spending little effort connecting with state powers in this way, securing their lives from socio-economic constraints.

Effect of Piper chaba Hunter, Piper sarmentosum Roxb. and Piper interruptum Opiz. on natural killer cell activity and lymphocyte proliferation.

Science.gov (United States)

Panthong, Sumalee; Itharat, Arunporn

2014-08-01

Immune system is the most important system ofhuman body. Thaifolk doctors have used some medicinal plants as an adaptogenic drug or immunomodulatory agent. Piper chaba Hunter, Piper sarmentosum Roxb. and Piper interruptum Opiz. are used by folk doctors to activate immune response in cancer patients. To investigate the effect on natural killer cell activity and on lymphocyte proliferation activity of water extract of P chaba Hunter P. sarmentosum Roxb. and P interruptum Opiz. MATERIAL ANDMETHOD: Plant materials were extracted by decoction method. All extracts were testedfor an immunomodulatory effect using PBMCs from twelve healthy donors by chromium release assay. Lymphocyte proliferation was also determined by 3H-thymidine uptake assay. The degree of activation was expressed as the stimulation index. The water extract of P chaba Hunter significantly increased lymphocyte proliferation at concentrations ofl ng/ml, 10 ng/ml, 1 μg/ml, 5 μg/ml, 10 μg/ml and 100 μg/ml. P sarmentosum Roxb., and P interruptum Opiz. extracts at those concentrations significantly stimulated lymphocyteproliferation. P sarmentosum Roxb. extractsignificantly increased natural killer (NK) cell activity at a concentration of 100 μg/ml but P chaba Hunter and P interruptum Opiz. extracts did not significantly stimulate natural killer cell activity. P chaba Hunter, P interruptum Opiz. andP sarmentosum Roxb. have an immunomodulatory effect especially for P sarmentosum Roxb. extract which can activate both lymphocyte proliferation and NK cell activity.

Cast iron - a predictable material

Directory of Open Access Journals (Sweden)

Jorg C. Sturm

2011-02-01

Full Text Available High strength compacted graphite iron (CGI or alloyed cast iron components are substituting previously used non-ferrous castings in automotive power train applications. The mechanical engineering industry has recognized the value in substituting forged or welded structures with stiff and light-weight cast iron castings. New products such as wind turbines have opened new markets for an entire suite of highly reliable ductile iron cast components. During the last 20 years, casting process simulation has developed from predicting hot spots and solidification to an integral assessment tool for foundries for the entire manufacturing route of castings. The support of the feeding related layout of the casting is still one of the most important duties for casting process simulation. Depending on the alloy poured, different feeding behaviors and self-feeding capabilities need to be considered to provide a defect free casting. Therefore, it is not enough to base the prediction of shrinkage defects solely on hot spots derived from temperature fields. To be able to quantitatively predict these defects, solidification simulation had to be combined with density and mass transport calculations, in order to evaluate the impact of the solidification morphology on the feeding behavior as well as to consider alloy dependent feeding ranges. For cast iron foundries, the use of casting process simulation has become an important instrument to predict the robustness and reliability of their processes, especially since the influence of alloying elements, melting practice and metallurgy need to be considered to quantify the special shrinkage and solidification behavior of cast iron. This allows the prediction of local structures, phases and ultimately the local mechanical properties of cast irons, to asses casting quality in the foundry but also to make use of this quantitative information during design of the casting. Casting quality issues related to thermally driven

Hunter disease eClinic: interactive, computer-assisted, problem-based approach to independent learning about a rare genetic disease

Directory of Open Access Journals (Sweden)

Moldovan Laura

2010-10-01

Full Text Available Abstract Background Computer-based teaching (CBT is a well-known educational device, but it has never been applied systematically to the teaching of a complex, rare, genetic disease, such as Hunter disease (MPS II. Aim To develop interactive teaching software functioning as a virtual clinic for the management of MPS II. Implementation and Results The Hunter disease eClinic, a self-training, user-friendly educational software program, available at the Lysosomal Storage Research Group (http://www.lysosomalstorageresearch.ca, was developed using the Adobe Flash multimedia platform. It was designed to function both to provide a realistic, interactive virtual clinic and instantaneous access to supporting literature on Hunter disease. The Hunter disease eClinic consists of an eBook and an eClinic. The eClinic is the interactive virtual clinic component of the software. Within an environment resembling a real clinic, the trainee is instructed to perform a medical history, to examine the patient, and to order appropriate investigation. The program provides clinical data derived from the management of actual patients with Hunter disease. The eBook provides instantaneous, electronic access to a vast collection of reference information to provide detailed background clinical and basic science, including relevant biochemistry, physiology, and genetics. In the eClinic, the trainee is presented with quizzes designed to provide immediate feedback on both trainee effectiveness and efficiency. User feedback on the merits of the program was collected at several seminars and formal clinical rounds at several medical centres, primarily in Canada. In addition, online usage statistics were documented for a 2-year period. Feedback was consistently positive and confirmed the practical benefit of the program. The online English-language version is accessed daily by users from all over the world; a Japanese translation of the program is also available. Conclusions The

Hunter disease eClinic: interactive, computer-assisted, problem-based approach to independent learning about a rare genetic disease.

Science.gov (United States)

Al-Jasmi, Fatma; Moldovan, Laura; Clarke, Joe T R

2010-10-25

Computer-based teaching (CBT) is a well-known educational device, but it has never been applied systematically to the teaching of a complex, rare, genetic disease, such as Hunter disease (MPS II). To develop interactive teaching software functioning as a virtual clinic for the management of MPS II. The Hunter disease eClinic, a self-training, user-friendly educational software program, available at the Lysosomal Storage Research Group (http://www.lysosomalstorageresearch.ca), was developed using the Adobe Flash multimedia platform. It was designed to function both to provide a realistic, interactive virtual clinic and instantaneous access to supporting literature on Hunter disease. The Hunter disease eClinic consists of an eBook and an eClinic. The eClinic is the interactive virtual clinic component of the software. Within an environment resembling a real clinic, the trainee is instructed to perform a medical history, to examine the patient, and to order appropriate investigation. The program provides clinical data derived from the management of actual patients with Hunter disease. The eBook provides instantaneous, electronic access to a vast collection of reference information to provide detailed background clinical and basic science, including relevant biochemistry, physiology, and genetics. In the eClinic, the trainee is presented with quizzes designed to provide immediate feedback on both trainee effectiveness and efficiency. User feedback on the merits of the program was collected at several seminars and formal clinical rounds at several medical centres, primarily in Canada. In addition, online usage statistics were documented for a 2-year period. Feedback was consistently positive and confirmed the practical benefit of the program. The online English-language version is accessed daily by users from all over the world; a Japanese translation of the program is also available. The Hunter disease eClinic employs a CBT model providing the trainee with realistic

Dimensional control of die castings

Science.gov (United States)

Karve, Aniruddha Ajit

The demand for net shape die castings, which require little or no machining, is steadily increasing. Stringent customer requirements are forcing die casters to deliver high quality castings in increasingly short lead times. Dimensional conformance to customer specifications is an inherent part of die casting quality. The dimensional attributes of a die casting are essentially dependent upon many factors--the quality of the die and the degree of control over the process variables being the two major sources of dimensional error in die castings. This study focused on investigating the nature and the causes of dimensional error in die castings. The two major components of dimensional error i.e., dimensional variability and die allowance were studied. The major effort of this study was to qualitatively and quantitatively study the effects of casting geometry and process variables on die casting dimensional variability and die allowance. This was accomplished by detailed dimensional data collection at production die casting sites. Robust feature characterization schemes were developed to describe complex casting geometry in quantitative terms. Empirical modeling was utilized to quantify the effects of the casting variables on dimensional variability and die allowance for die casting features. A number of casting geometry and process variables were found to affect dimensional variability in die castings. The dimensional variability was evaluated by comparisons with current published dimensional tolerance standards. The casting geometry was found to play a significant role in influencing the die allowance of the features measured. The predictive models developed for dimensional variability and die allowance were evaluated to test their effectiveness. Finally, the relative impact of all the components of dimensional error in die castings was put into perspective, and general guidelines for effective dimensional control in the die casting plant were laid out. The results of

Method and apparatus for improved melt flow during continuous strip casting

Science.gov (United States)

Follstaedt, Donald W.; King, Edward L.; Schneider, Ken C.

1991-11-12

The continuous casting of metal strip using the melt overflow process is improved by controlling the weir conditions in the nozzle to provide a more uniform flow of molten metal across the width of the nozzle and reducing the tendency for freezing of metal along the interface with refractory surfaces. A weir design having a sloped rear wall and tapered sidewalls and critical gap controls beneath the weir has resulted in the drastic reduction in edge tearing and a significant improvement in strip uniformity. The floor of the container vessel is preferably sloped and the gap between the nozzle and the rotating substrate is critically controlled. The resulting flow patterns observed with the improved casting process have reduced thermal gradients in the bath, contained surface slag and eliminated undesirable solidification near the discharge area by increasing the flow rates at those points.

Levels and sources of forest fire prevention knowledge of California hunters

Science.gov (United States)

William S. Folkman

1963-01-01

Males 30-50 years of age from the smaller urban centers (under 25,000 population) make up the bulk of the California hunter population. They are mainly from the skilled-semiskilled and professional-managerial occupations. Their level of knowledge about forest fire prevention is generally high, but their knowledge is weak in some pertinent areas. Most frequently...

Favorable ecological circumstances promote life expectancy in chimpanzees similar to that of human hunter-gatherers.

Science.gov (United States)

Wood, Brian M; Watts, David P; Mitani, John C; Langergraber, Kevin E

2017-04-01

Demographic data on wild chimpanzees are crucial for understanding the evolution of chimpanzee and hominin life histories, but most data come from populations affected by disease outbreaks and anthropogenic disturbance. We present survivorship data from a relatively undisturbed and exceptionally large community of eastern chimpanzees (Pan troglodytes schweinfurthii) at Ngogo, Kibale National Park, Uganda. We monitored births, deaths, immigrations, and emigrations in the community between 1995 and 2016. Using known and estimated ages, we calculated survivorship curves for the whole community, for males and females separately, and for individuals ≤2 years old when identified. We used a novel method to address age estimation error by calculating stochastic survivorship curves. We compared Ngogo life expectancy, survivorship, and mortality rates to those from other chimpanzee communities and human hunter-gatherers. Life expectancy at birth for both sexes combined was 32.8 years, far exceeding estimates of chimpanzee life expectancy in other communities, and falling within the range of human hunter-gatherers (i.e., 27-37 years). Overall, the pattern of survivorship at Ngogo was more similar to that of human hunter-gatherers than to other chimpanzee communities. Maximum lifespan for the Ngogo chimpanzees, however, was similar to that reported at other chimpanzee research sites and was less than that of human-hunter gatherers. The absence of predation by large carnivores may contribute to some of the higher survivorship at Ngogo, but this cannot explain the much higher survivorship at Ngogo than at Kanyawara, another chimpanzee community in the same forest, which also lacks large carnivores. Higher survivorship at Ngogo appears to be an adaptive response to a food supply that is more abundant and varies less than that of Kanyawara. Future analyses of hominin life history evolution should take these results into account. Copyright © 2017 Elsevier Ltd. All rights

The seed hunter in het spoor van Vavilov (interview met C. Kik)

NARCIS (Netherlands)

Zanderink, R.; Kik, C.

2013-01-01

Er moet voor een veredelaar een grote variatie aan plantmateriaal aanwezig zijn om uit te kunnen putten zodat onze gewassen, die vaak bestaan uit monoculturen, voor de toekomst veiliggesteld worden. Het vinden van die variatie is het werk van seed hunters of zadenverzamelaars. Eén van die seed

Nurses, medical records and the killing of sick persons before, during and after the Nazi regime in Germany.

Science.gov (United States)

Foth, Thomas

2013-06-01

During the Nazi regime (1933-1945), more than 300,000 psychiatric patients were killed. The well-calculated killing of chronic mentally 'ill' patients was part of a huge biopolitical program of well-established scientific, eugenic standards of the time. Among the medical personnel implicated in these assassinations were nurses, who carried out this program through their everyday practice. However, newer research raises suspicions that psychiatric patients were being assassinated before and after the Nazi regime, which, I hypothesize, implies that the motives for these killings must be investigated within psychiatric practice itself. An investigation of the impact of the interplay between the notes left by nurses and those by psychiatrists illustrates the active role of the psychiatric medical record in the killing of these patients. Using theoretical insights from Michel Foucault and philosopher Giorgio Agamben and analyzing one part of a particularly rich patient file found in the Langenhorn Psychiatric Asylum in the city of Hamburg, I demonstrate the role of the record in both constructing and deconstructing patient subjectivities. De-subjectifying patients condemned them to specific zones in the asylum within which they were reduced to their 'bare life'--a precondition for their physical assassination. © 2012 John Wiley & Sons Ltd.

The hunter a scientific novel

CERN Document Server

Genta, Giancarlo

2013-01-01

The 24th century: humankind has become a spacefaring civilization, colonizing the solar system and beyond. While no alien forms of life have yet been encountered in this expansion into space, colonists suddenly encounter machines of alien origin - huge robots able to reproduce themselves.  Called replicators by the colonists, they seem to have but a single goal: to destroy all organic life they come in contact with. Since the colonial governments have no means to fight this menace directly, they instead promise huge rewards to whoever destroys a replicator. As a result, the frontier attracts a new kind of adventurers, the Hunters, who work to find and destroy the replicators. Mike Edwards, a skilled young maintenance technician and robotics expert at a faraway outpost, will not only become one of them - but be the very first one to unlock the secret behind the replicators’ origin and mission.   The scientific and technical aspects underlying the plot - in particular space travel, robotics and self-replica...

Shooting history and presence of high-frequency hearing impairment in swedish hunters: A cross-sectional internet-based observational study.

Science.gov (United States)

Honeth, Louise; Ström, Peter; Ploner, Alexander; Bagger-Sjöbäck, Dan; Rosenhall, Ulf; Nyrén, Olof

2015-01-01

The aim of this cross-sectional study among Swedish hunters was to examine the association between shooting history and presence of high-frequency hearing impairment (HFHI). All hunters registered with an e-mail address in the membership roster of the Swedish Hunters' Association were invited via e-mail to a secure website with a questionnaire and an Internet-based audiometry test. Associations, expressed as prevalence ratio (PR), were multivariately modelled using Poisson regression. The questionnaire was answered by 1771 hunters (age 11-91 years), and 202 of them also completed the audiometry test. Subjective severe hearing loss was reported by 195/1771 (11%), while 23/202 (11%) exhibited HFHI upon testing with Internet-based audiometry. As many as 328/1771 (19%) had never used hearing protection during hunting. In the preceding 5 years, 785/1771 (45%), had fired >6 unprotected gunshots with hunting rifle calibers. The adjusted PR of HFHI when reporting 1-6 such shots, relative to 0, was 1.5 [95% confidence interval (CI) 1.1-2.1; P = 0.02]. We could not verify any excessive HFHI prevalence among 89 hunters reporting unprotected exposure to such gunshot noise >6 times. Nor did the total number of reported rifle shots seem to matter. These findings support the notion of a wide variation in individual susceptibility to impulse noise; that significant sound energy, corresponding to unprotected noise from hunting rifle calibers, seems to be required; that susceptible individuals may sustain irreversible damage to the inner ear from just one or a few shots; and that use of hearing protection should be encouraged from the first shot with such weapons.

Compound cast product and method for producing a compound cast product

Science.gov (United States)

Meyer, Thomas N.; Viswanathan, Srinath

2002-09-17

A compound cast product is formed in a casting mold (14) having a mold cavity (16) sized and shaped to form the cast product. A plurality of injectors (24) is supported from a bottom side (26) of the casting mold (14). The injectors (24) are in fluid communication with the mold cavity (16) through the bottom side (26) of the casting mold (14). A molten material holder furnace (12) is located beneath the casting mold (14). The holder furnace (12) defines molten material receiving chambers (36) configured to separately contain supplies of two different molten materials (37, 38). The holder furnace (12) is positioned such that the injectors (24) extend downward into the receiving chamber (36). The receiving chamber (36) is separated into at least two different flow circuits (51, 52). A first molten material (37) is received in a first flow circuit (51), and a second molten material (38) is received into a second flow circuit (52). The first and second molten materials (37, 38) are injected into the mold cavity (16) by the injectors (24) acting against the force of gravity. The injectors (24) are positioned such that the first and second molten materials (37, 38) are injected into different areas of the mold cavity (16). The molten materials (37, 38) are allowed to solidify and the resulting compound cast product is removed from the mold cavity (16).

Multi-layers castings

Directory of Open Access Journals (Sweden)

J. Szajnar

2010-01-01

Full Text Available In paper is presented the possibility of making of multi-layers cast steel castings in result of connection of casting and welding coating technologies. First layer was composite surface layer on the basis of Fe-Cr-C alloy, which was put directly in founding process of cast carbon steel 200–450 with use of preparation of mould cavity method. Second layer were padding welds, which were put with use of TIG – Tungsten Inert Gas surfacing by welding technology with filler on Ni matrix, Ni and Co matrix with wolfram carbides WC and on the basis on Fe-Cr-C alloy, which has the same chemical composition with alloy, which was used for making of composite surface layer. Usability for industrial applications of surface layers of castings were estimated by criterion of hardness and abrasive wear resistance of type metal-mineral.

Rheologic behaviors of A356 aluminum alloy billet produced by semisolid continuous casting process

Directory of Open Access Journals (Sweden)

Shuming XING

2004-08-01

Full Text Available The experiments for rheologic behaviors of semisolid continous casting billets of A356 alloy in semisolid state has been carried out with a multifunctional rheometer. The results show that the deformation rate increases with loading time, the maximum strain reaches 120% (which is one time larger than that of traditional casting billet and the strain can be rapidly eliminated to 10% after unloading. Moreover, there is a critic stress for billet deformation even in semisolid state, which is named as critic shear stress. This stress increases with the decreasing of heating time. The rheologic behaviors can be expressed by five elements mechanical model and can be modified with the increasing of heating time.

Therapeutic Fascism: re-educating communists in Nazi-occupied Serbia, 1942-44.

Science.gov (United States)

Antic, Ana

2014-03-01

This article probes the relationship between psychoanalysis and right-wing authoritarianism, and analyses a unique psychotherapeutic institution established by Serbia's World War II collaborationist regime. The extraordinary Institute for compulsory re-education of high-school and university students affiliated with the Communist resistance movement emerged in the context of a brutal civil war and violent retaliations against Communist activists, but its openly psychoanalytic orientation was even more astonishing. In order to stem the rapid spread of Communism, the collaborationist state, led by its most extreme fascistic elements, officially embraced psychotherapy, the 'talking cure' and Freudianism, and conjured up its own theory of mental pathology and trauma - one that directly contradicted the Nazi concepts of society and the individual. In the course of the experiment, Serbia's collaborationists moved away from the hitherto prevailing organicist, biomedical model of mental illness, and critiqued traditional psychiatry's therapeutic pessimism.

Re-evaluating the resource potential of lomas fog oasis environments for Preceramic hunter-gatherers under past ENSO modes on the south coast of Peru

Science.gov (United States)

Beresford-Jones, David; Pullen, Alexander G.; Whaley, Oliver Q.; Moat, Justin; Chauca, George; Cadwallader, Lauren; Arce, Susana; Orellana, Alfonso; Alarcón, Carmela; Gorriti, Manuel; Maita, Patricia K.; Sturt, Fraser; Dupeyron, Agathe; Huaman, Oliver; Lane, Kevin J.; French, Charles

2015-12-01

Lomas - ephemeral seasonal oases sustained by ocean fogs - were critical to ancient human ecology on the desert Pacific coast of Peru: one of humanity's few independent hearths of agriculture and "pristine" civilisation. The role of climate change since the Late Pleistocene in determining productivity and extent of past lomas ecosystems has been much debated. Here we reassess the resource potential of the poorly studied lomas of the south coast of Peru during the long Middle Pre-ceramic period (c. 8000-4500 BP): a period critical in the transition to agriculture, the onset of modern El Niño Southern Oscillation ('ENSO') conditions, and eustatic sea-level rise and stabilisation and beach progradation. Our method combines vegetation survey and herbarium collection with archaeological survey and excavation to make inferences about both Preceramic hunter-gatherer ecology and the changed palaeoenvironments in which it took place. Our analysis of newly discovered archaeological sites - and their resource context - show how lomas formations defined human ecology until the end of the Middle Preceramic Period, thereby corroborating recent reconstructions of ENSO history based on other data. Together, these suggest that a five millennia period of significantly colder seas on the south coast induced conditions of abundance and seasonal predictability in lomas and maritime ecosystems, that enabled Middle Preceramic hunter-gatherers to reduce mobility by settling in strategic locations at the confluence of multiple eco-zones at the river estuaries. Here the foundations of agriculture lay in a Broad Spectrum Revolution that unfolded, not through population pressure in deteriorating environments, but rather as an outcome of resource abundance.

Settlement-Size Scaling among Prehistoric Hunter-Gatherer Settlement Systems in the New World.

Directory of Open Access Journals (Sweden)

W Randall Haas

Full Text Available Settlement size predicts extreme variation in the rates and magnitudes of many social and ecological processes in human societies. Yet, the factors that drive human settlement-size variation remain poorly understood. Size variation among economically integrated settlements tends to be heavy tailed such that the smallest settlements are extremely common and the largest settlements extremely large and rare. The upper tail of this size distribution is often formalized mathematically as a power-law function. Explanations for this scaling structure in human settlement systems tend to emphasize complex socioeconomic processes including agriculture, manufacturing, and warfare-behaviors that tend to differentially nucleate and disperse populations hierarchically among settlements. But, the degree to which heavy-tailed settlement-size variation requires such complex behaviors remains unclear. By examining the settlement patterns of eight prehistoric New World hunter-gatherer settlement systems spanning three distinct environmental contexts, this analysis explores the degree to which heavy-tailed settlement-size scaling depends on the aforementioned socioeconomic complexities. Surprisingly, the analysis finds that power-law models offer plausible and parsimonious statistical descriptions of prehistoric hunter-gatherer settlement-size variation. This finding reveals that incipient forms of hierarchical settlement structure may have preceded socioeconomic complexity in human societies and points to a need for additional research to explicate how mobile foragers came to exhibit settlement patterns that are more commonly associated with hierarchical organization. We propose that hunter-gatherer mobility with preferential attachment to previously occupied locations may account for the observed structure in site-size variation.

Guidelines for diagnosis and treatment of Hunter Syndrome for clinicians in Latin America

Directory of Open Access Journals (Sweden)

Roberto Giugliani

2014-06-01

Full Text Available This review aims to provide clinicians in Latin America with the most current information on the clinical aspects, diagnosis, and management of Hunter syndrome, a serious and progressive disease for which specific treatment is available. Hunter syndrome is a genetic disorder where iduronate-2-sulfatase (I2S, an enzyme that degrades glycosaminoglycans, is absent or deficient. Clinical manifestations vary widely in severity and involve multiple organs and tissues. An attenuated and a severe phenotype are recognized depending on the degree of cognitive impairment. Early diagnosis is vital for disease management. Clinical signs common to children with Hunter syndrome include inguinal hernia, frequent ear and respiratory infections, facial dysmorphisms, macrocephaly, bone dysplasia, short stature, sleep apnea, and behavior problems. Diagnosis is based on screening urinary glycosaminoglycans and confirmation by measuring I2S activity and analyzing I2S gene mutations. Idursulfase (recombinant I2S (Elaprase®, Shire enzyme replacement therapy (ERT, designed to address the underlying enzyme deficiency, is approved treatment and improves walking capacity and respiratory function, and reduces spleen and liver size and urinary glycosaminoglycan levels. Additional measures, responding to the multi-organ manifestations, such as abdominal/inguinal hernia repair, carpal tunnel surgery, and cardiac valve replacement, should also be considered. Investigational treatment options such as intrathecal ERT are active areas of research, and bone marrow transplantation is in clinical practice. Communication among care providers, social workers, patients and families is essential to inform and guide their decisions, establish realistic expectations, and assess patients' responses.

Section thickness-dependent tensile properties of squeeze cast magnesium alloy AM60

Directory of Open Access Journals (Sweden)

Xuezhi Zhang

2012-05-01

Full Text Available The development of alternative casting processes is essential for the high demand of light weight magnesium components to be used in the automotive industry, which often contain different section thicknesses. Squeeze casting with its inherent advantages has been approved for the capability of minimizing the gas porosity in magnesium alloys. For advanced engineering design of light magnesium automotive applications, it is critical to understand the effect of section thickness on mechanical properties of squeeze cast magnesium alloys. In this study, magnesium alloy AM60 with different section thicknesses of 6, 10 and 20 mm squeeze cast under an applied pressure of 30 MPa was investigated. The prepared squeeze cast AM60 specimens were tensile tested at room termperature. The results indicate that the mechanical properties including yield strength (YS, ultimate tensile strength (UTS and elongation (A decrease with an increase in section thickness of squeeze cast AM60. The microstructure analysis shows that the improvement in the tensile behavior of squeeze cast AM60 is primarily attributed to the low-gas porosity level and fine grain strucuture which result from the variation of cooling rate of different section thickness. The numerical simulation (Magmasoft? was employed to determine the solidification rates of each step, and the simulated results show that the solidification rate of the alloy decreases with an increase in the section thickness. The computed solidification rates support the experimental observation on grain structural development.

Accuracy of single-abutment digital cast obtained using intraoral and cast scanners.

Science.gov (United States)

Lee, Jae-Jun; Jeong, Ii-Do; Park, Jin-Young; Jeon, Jin-Hun; Kim, Ji-Hwan; Kim, Woong-Chul

2017-02-01

Scanners are frequently used in the fabrication of dental prostheses. However, the accuracy of these scanners is variable, and little information is available. The purpose of this in vitro study was to compare the accuracy of cast scanners with that of intraoral scanners by using different image impression techniques. A poly(methyl methacrylate) master model was fabricated to replicate a maxillary first molar single-abutment tooth model. The master model was scanned with an accurate engineering scanner to obtain a true value (n=1) and with 2 intraoral scanners (CEREC Bluecam and CEREC Omnicam; n=6 each). The cast scanner scanned the master model and duplicated the dental stone cast from the master model (n=6). The trueness and precision of the data were measured using a 3-dimensional analysis program. The Kruskal-Wallis test was used to compare the different sets of scanning data, followed by a post hoc Mann-Whitney U test with a significance level modified by Bonferroni correction (α/6=.0083). The type 1 error level (α) was set at .05. The trueness value (root mean square: mean ±standard deviation) was 17.5 ±1.8 μm for the Bluecam, 13.8 ±1.4 μm for the Omnicam, 17.4 ±1.7 μm for cast scanner 1, and 12.3 ±0.1 μm for cast scanner 2. The differences between the Bluecam and the cast scanner 1 and between the Omnicam and the cast scanner 2 were not statistically significant (P>.0083), but a statistically significant difference was found between all the other pairs (POmnicam, 9.2 ±1.2 μm for cast scanner 1, and 6.9 ±2.6 μm for cast scanner 2. The differences between Bluecam and Omnicam and between Omnicam and cast scanner 1 were not statistically significant (P>.0083), but there was a statistically significant difference between all the other pairs (POmnicam in video image impression had better trueness than a cast scanner but with a similar level of precision. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by

Identification of temperature changes dynamics in selected castings as a contribution to performance life improvement

Directory of Open Access Journals (Sweden)

A. Pytel

2010-07-01

Full Text Available Parameters describing boundary conditions and dynamics of temperature changes during casting cooling in foundry moulds and thesuccessive performance, especially as regards the massive cast elements, were discussed. Considering the specific nature of castingoperation, non-standard methods of examination of the isotherms of temperature fields on the casting surface were described to determinelocal overheating resulting from the technological process, chemical composition, properties of the currently applied insulation materials,casting defects and/or design. Identification of these parameters can be interpolated to laboratory conditions and to the validation of virtual models subject to computer simulation. The use in simulation of genetic algorithms combined with the results of measurements under real conditions enables more precise determination of the performance parameters, including critical states of stresses present in a structure. This should allow further optimisation of the massive castings design, considering the specific nature of a manufacturing process (alloy composition included, combined with performance parameters. Measures described here are expected to contribute to the reduced casting weight and longer time of operation.

PRELIMINARY INVESTIGATIONS ON RELATIONSHIP BETWEEN POLYMORPHISM AT CAST LOCUS AND THE QUALITY OF PORK

Directory of Open Access Journals (Sweden)

Ivona Đurkin

2009-12-01

Full Text Available The present study was performed in order to investigate a relationship between polymorphisms on the calpastatin gene (CAST and pig meat quality traits. The investigation was carried out on 29 gilts and barrows, crosses of Large White x German Landrace randomly selected at slaughter line. Pigs were slaughtered at 130-150 kg of live weight and blood samples were taken for genomic DNA analysis. The following indicators of meat quality and meat chemical composition were evaluated: pH and electric conductivity measured 45 minutes post mortem in m. Longissimus dorsi (LD muscle and in M. Semimembranosus (SM muscle; electric conductivity measured at the same locations after 24h of cooling; drip loss (determined by “bag method”; colour (measured with Minolta chromameter and expressed as Hunter L, a, b values; instrumental tenderness assessed as Warner-Bratzler (WB shear force and moisture, fat, protein and collagen content (% determined on cooked LD muscle after 24h of thawing. The amplification products of the CAST gene were digested with HinfI restriction endonuclease and three genotypes (AA, BB and AB were revealed. Statistical analysis showed that meat originated from pigs of AB genotype had the lowest WB shear force and the highest protein content of cooked LD muscle. As for the indicators of technological meat quality, statistically significant differences (p<0.05 were found between genotype AA and both BB and AB genotype for electric conductivity measured in LD muscle after 24h of cooling, as well as between BB and both AA and AB genotypes for drip loss.

Clean Metal Casting

Energy Technology Data Exchange (ETDEWEB)

Makhlouf M. Makhlouf; Diran Apelian

2002-02-05

The objective of this project is to develop a technology for clean metal processing that is capable of consistently providing a metal cleanliness level that is fit for a given application. The program has five tasks: Development of melt cleanliness assessment technology, development of melt contamination avoidance technology, development of high temperature phase separation technology, establishment of a correlation between the level of melt cleanliness and as cast mechanical properties, and transfer of technology to the industrial sector. Within the context of the first task, WPI has developed a standardized Reduced Pressure Test that has been endorsed by AFS as a recommended practice. In addition, within the context of task1, WPI has developed a melt cleanliness sensor based on the principles of electromagnetic separation. An industrial partner is commercializing the sensor. Within the context of the second task, WPI has developed environmentally friendly fluxes that do not contain fluorine. Within the context of the third task, WPI modeled the process of rotary degassing and verified the model predictions with experimental data. This model may be used to optimize the performance of industrial rotary degassers. Within the context of the fourth task, WPI has correlated the level of melt cleanliness at various foundries, including a sand casting foundry, a permanent mold casting foundry, and a die casting foundry, to the casting process and the resultant mechanical properties. This is useful in tailoring the melt cleansing operations at foundries to the particular casting process and the desired properties of cast components.

Coccidioidomycosis in armadillo hunters from the state of Ceará, Brazil

OpenAIRE

Brillhante, Raimunda Sâmia Nogueira; Moreira Filho, Renato Evando; Rocha, Marcos Fábio Gadelha; Castelo-Branco, Débora de Souza Collares Maia; Fechine, Maria Auxiliadora Bezerra; Lima, Rita Amanda Chaves de; Picanço, Yuri Vieira Cunha; Cordeiro, Rossana de Aguiar; Camargo, Zoilo Pires de; Queiroz, José Ajax Nogueira; Araujo, Roberto Wagner Bezerra de; Mesquita, Jacó Ricarte Lima de; Sidrim, José Júlio Costa

2012-01-01

Coccidioidomycosis is a systemic mycosis with a variable clinical presentation. Misdiagnosis of coccidioidomycosis as bacterial pneumopathy leads to inappropriate prescription of antibiotics and delayed diagnosis. This report describes an outbreak among armadillo hunters in northeastern Brazil in which an initial diagnosis of bacterial pneumonia was later confirmed as coccidioidomycosis caused by Coccidioides posadasii. Thus, this mycosis should be considered as an alternative diagnosis in pa...

Human behavior. Sex equality can explain the unique social structure of hunter-gatherer bands.

Science.gov (United States)

Dyble, M; Salali, G D; Chaudhary, N; Page, A; Smith, D; Thompson, J; Vinicius, L; Mace, R; Migliano, A B

2015-05-15

The social organization of mobile hunter-gatherers has several derived features, including low within-camp relatedness and fluid meta-groups. Although these features have been proposed to have provided the selective context for the evolution of human hypercooperation and cumulative culture, how such a distinctive social system may have emerged remains unclear. We present an agent-based model suggesting that, even if all individuals in a community seek to live with as many kin as possible, within-camp relatedness is reduced if men and women have equal influence in selecting camp members. Our model closely approximates observed patterns of co-residence among Agta and Mbendjele BaYaka hunter-gatherers. Our results suggest that pair-bonding and increased sex egalitarianism in human evolutionary history may have had a transformative effect on human social organization. Copyright © 2015, American Association for the Advancement of Science.

Nazi Medical Research in Neuroscience: Medical Procedures, Victims, and Perpetrators.

Science.gov (United States)

Loewenau, Aleksandra; Weindling, Paul J

Issues relating to the euthanasia killings of the mentally ill, the medical research conducted on collected body parts, and the clinical investigations on living victims under National Socialism are among the best-known abuses in medical history. But to date, there have been no statistics compiled regarding the extent and number of the victims and perpetrators, or regarding their identities in terms of age, nationality, and gender. "Victims of Unethical Human Experiments and Coerced Research under National Socialism," a research project based at Oxford Brookes University, has established an evidence-based documentation of the overall numbers of victims and perpetrators through specific record linkages of the evidence from the period of National Socialism, as well as from post-WWII trials and other records. This article examines the level and extent of these unethical medical procedures as they relate to the field of neuroscience. It presents statistical information regarding the victims, as well as detailing the involvement of the perpetrators and Nazi physicians with respect to their post-war activities and subsequent court trials.

Caste System

OpenAIRE

Hoff, Karla

2016-01-01

In standard economics, individuals are rational actors and economic forces undermine institutions that impose large inefficiencies. The persistence of the caste system is evidence of the need for psychologically more realistic models of decision-making in economics. The caste system divides South Asian society into hereditary groups whose lowest ranks are represented as innately polluted. ...

Gating Systems for Sizeable Castings from Al Alloys Cast into Ceramic Moulds

Directory of Open Access Journals (Sweden)

I. Stachovec

2012-04-01

Full Text Available In contrast to casting to conventional non-reusable “sand” moulds, for which calculating technique for an optimum design of the gating system is comparatively well-developed, a trial-and-error method is applied mostly for casting to ceramic shell moulds made by the investment casting technology. A technologist selects from gating systems of several types (that are standardized by the foundry mostly on the basis of experience. However, this approach is not sustainable with ever growing demands on quality of castings and also the economy of their fabrication as well as with new types of complex sizeable castings introduced to the production gradually (by new customers from the aircraft industry above all any more. The simulation software may be used as a possible tool for making the process of optimising gating systems more effective.

Diffusion of C and Cr During Creation of Surface Layer on Cast Steel Casting

Directory of Open Access Journals (Sweden)

Szajnar J.

2014-10-01

Full Text Available In paper a method of improvement in utility properties of unalloyed cast steel casting in result of diffusion of C and Cr in process of creation of surface layer is presented. The aim of paper was determination of diffusion range of basic elements of alloyed surface layer. Moreover a quantitative analysis of carbides phase strengthens alloyed surface layer of casting was carried out. The results of studies shown that important factors of surface layer creation are maximal temperature Tmax on granular insert – cast steel boundary dependent of pouring temperature, granularity Zw of Fe-Cr-C alloy insert and thickness of casting wall gśo. On the basis of obtained results was affirmed that with increase of thickness of casting wall increases range of diffusion in solid state in Fe-Cr-C grains and in liquid state. Moreover the range of Tmax = 13001500oC favours creation of the proper alloyed surface layers on cast steel.

HiggsHunters - a citizen science project for ATLAS

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00053405; The ATLAS collaboration

2017-01-01

Since the launch of HiggsHunters.org in November 2014, citizen science volunteers have classified more than a million points of interest in images from the ATLAS experiment at the LHC. Volunteers have been looking for displaced vertices and unusual features in images recorded during LHC Run-1. We discuss the design of the project, its impact on the public, and the results of how the human volunteers performed relative to the computer algorithms in identifying displaced secondary vertices. People were better than existing algorithms at identifying displaced vertices for some masses and lifetimes, and showed good ability to recognize unexpected new features in the data.

Deer hunting and television: are tv shows creating expectations among deer hunters?

Science.gov (United States)

Joshua D. Agee; Craig A. Miller

2009-01-01

Throughout the past two decades new media outlets emphasizing trophy deer hunting have come to dominate hunting culture. Using data collected through a mail survey of Illinois deer hunters (n = 2,683, 78.5-percent response), we tested two hypotheses to determine factors that contribute to preference for hunting trophy deer. In particular, we examined the relationship...

Cadmium, lead, and chromium in large game: a local-scale exposure assessment for hunters consuming meat and liver of wild boar.

Science.gov (United States)

Danieli, P P; Serrani, F; Primi, R; Ponzetta, M P; Ronchi, B; Amici, A

2012-11-01

Heavy metals are ubiquitous in soil, water, and air. Their entrance into the food chain is an important environmental issue that entails risks to humans. Several reports indicate that game meat can be an important source of heavy metals, particularly because of the increasing consumption of game meat, mainly by hunters. We performed an exposure assessment of hunters and members of their households, both adults and children, who consumed wild boar (WB) meat and offal. We estimated the amount of cadmium, lead, and chromium in the tissues of WB hunted in six areas within Viterbo Province (Italy) and gathered data on WB meat and offal consumption by conducting specific diet surveys in the same areas. The exposure to cadmium, lead, and chromium was simulated with specifically developed Monte Carlo simulation models. Cadmium and lead levels in WB liver and meat harvested in Viterbo Province (Italy) were similar to or lower than the values reported in other studies. However, some samples contained these metals at levels greater then the EU limits set for domestic animals. The chromium content of meat or liver cannot be evaluated against any regulatory limit, but our results suggest that the amounts of this metal found in WB products may reflect a moderate environmental load. Our survey of the hunter population confirmed that their consumption of WB meat and liver was greater than that of the general Italian population. This level of consumption was comparable with other European studies. Consumption of WB products contributes significantly to cadmium and lead exposure of both adults and children. More specifically, consumption of the WB liver contributed significantly to total cadmium and lead exposure of members of the households of WB hunters. As a general rule, liver consumption should be kept to a minimum, especially for children living in these hunter households. The exposure to chromium estimated for this population of hunters may be considered to be safe. However

U.S. Geological Survey's ShakeCast: A cloud-based future

Science.gov (United States)

Wald, David J.; Lin, Kuo-Wan; Turner, Loren; Bekiri, Nebi

2014-01-01

When an earthquake occurs, the U. S. Geological Survey (USGS) ShakeMap portrays the extent of potentially damaging shaking. In turn, the ShakeCast system, a freely-available, post-earthquake situational awareness application, automatically retrieves earthquake shaking data from ShakeMap, compares intensity measures against users’ facilities, sends notifications of potential damage to responsible parties, and generates facility damage assessment maps and other web-based products for emergency managers and responders. ShakeCast is particularly suitable for earthquake planning and response purposes by Departments of Transportation (DOTs), critical facility and lifeline utilities, large businesses, engineering and financial services, and loss and risk modelers. Recent important developments to the ShakeCast system and its user base are described. The newly-released Version 3 of the ShakeCast system encompasses advancements in seismology, earthquake engineering, and information technology applicable to the legacy ShakeCast installation (Version 2). In particular, this upgrade includes a full statistical fragility analysis framework for general assessment of structures as part of the near real-time system, direct access to additional earthquake-specific USGS products besides ShakeMap (PAGER, DYFI?, tectonic summary, etc.), significant improvements in the graphical user interface, including a console view for operations centers, and custom, user-defined hazard and loss modules. The release also introduces a new adaption option to port ShakeCast to the "cloud". Employing Amazon Web Services (AWS), users now have a low-cost alternative to local hosting, by fully offloading hardware, software, and communication obligations to the cloud. Other advantages of the "ShakeCast Cloud" strategy include (1) Reliability and robustness of offsite operations, (2) Scalability naturally accommodated, (3), Serviceability, problems reduced due to software and hardware uniformity, (4

Multiscale modeling for the prediction of casting defects in investment cast aluminum alloys

International Nuclear Information System (INIS)

Hamilton, R.W.; See, D.; Butler, S.; Lee, P.D.

2003-01-01

Macroscopic modeling of heat transfer and fluid flow is now routinely used for the prediction of macroscopic defects in castings, while microscopic models are used to investigate the effects of alloy changes on typical microstructures. By combining these two levels of modeling it is possible to simulate the casting process over a wider range of spatial and temporal scales. This paper presents a multiscale model where micromodels for dendrite arm spacing and microporosity are incorporated into a macromodel of heat transfer and in order to predict the as cast microstructure and prevalence of microscopic defects, specifically porosity. The approach is applied to aluminum alloy (L169) investment castings. The models are compared with results obtained by optical image analysis of prepared slices, and X-ray tomography of volume samples from the experiments. Multiscale modeling is shown to provide the designer with a useful tool to improve the properties of the final casting by testing how altering the casting process affects the final microstructure including porosity

[The surface roughness analysis of the titanium casting founding by a new titanium casting investment material].

Science.gov (United States)

Liang, Qin-ye; Wu, Xia-yi; Lin, Xue-feng

2012-04-01

To investigate the surface roughness property of the titanium castings cast in a new investment for titanium casting. Six wax patterns (20 mm × 20 mm × 0.5 mm) were invested using two investments: three in a new titanium investment material and three in the control material (Rematitan Plus). Six titanium specimens were obtained by conventional casting. After casting, surface roughness of the specimens were evaluated with a surface profilometer. The surface roughness of the specimens cast in new titanium investment material was (1.72 ± 0.08) µm, which was much smaller than that from Rematitan Plus [(1.91 ± 0.15) µm, P cast using these two investment materials are both smooth enough to fulfill the demand of the titanium precision-casting for prosthodontic clinical use.

Blood, guts and knife cuts: reducing the risk of swine brucellosis in feral pig hunters in north-west New South Wales, Australia.

Science.gov (United States)

Massey, P D; Polkinghorne, B G; Durrheim, D N; Lower, T; Speare, R

2011-01-01

Humans who have close contact with livestock, wild or feral animals can risk acquiring zoonotic infections such as brucellosis, Q fever, and leptospirosis. Human infection with Brucella suis (swine brucellosis) usually follows occupational or recreational exposure to infected animals. Worldwide, many cases of human infection follow contact with infected feral pigs. In Australia there is a growing market for the export of 'wild boar' and a considerable number of people are involved in feral pig hunting. However, feral pig hunters are often hard to reach with health strategies. According to Australian authorities the most important means of preventing disease in humans includes covering cuts; wearing gloves; washing hands; and avoiding blood when coming into contact with feral pigs. There has not been an evaluation of the acceptability of these recommended risk-reduction strategies in the settings where feral pig hunting and evisceration occurs. Semi-structured interviews and small focus groups were conducted with feral pig hunters in north-west New South Wales (NSW), Australia, to explore their hunting experiences and views on the brucellosis prevention strategies. Interview and focus group notes were thematically analysed. There was a range of experiences of feral pig hunting, from a very professional approach to a purely recreational approach. The main domains that emerged from participants' experiences during their most recent feral pig hunting activity and their reflections on current swine brucellosis risk reduction strategies were: 'you've gotta be tough to be a feral pig hunter'; 'most of the suggested strategies won't work as they are'; 'reducing risk in the scrub'; and 'how to let pig hunters know'. The recreational nature and prevailing macho perspective of participants demand a pragmatic approach to risk reduction if it is going to prove acceptable to feral pig hunters. The 'you've gotta be tough to be a feral pig hunter' context of the activity and the

Sleep disturbances in survivors of the Nazi Holocaust.

Science.gov (United States)

Rosen, J; Reynolds, C F; Yeager, A L; Houck, P R; Hurwitz, L F

1991-01-01

Sleep disturbances are commonly reported by victims of extraordinary stress and can persist for decades. This study was designed to test the hypothesis that survivors of the Nazi Holocaust would have significantly more and different sleep problems than depressed and healthy comparison subjects and that the severity of the survivors' problems would be correlated with length of time spent in a concentration camp. Forty-two survivors, 37 depressed patients, and 54 healthy subjects of about the same age, all living in the community, described their sleep patterns over the preceding month on the Pittsburgh Sleep Quality Index, a self-rating instrument that inquires about quality, latency, duration, efficiency, and disturbances of sleep, use of sleep medication, and daytime dysfunction. The survivors had significantly greater sleep impairment than the healthy comparison subjects, as measured by all subscales of the index, but had less impairment than the depressed patients except on the sleep disturbances and daytime dysfunction subscales. However, for specific items within these subscales, survivors had significantly more frequent awakenings due to bad dreams and had less loss of enthusiasm than the depressed subjects. Sleep disturbances and frequency of nightmares were significantly and positively correlated with the duration of the survivors' internment in concentration camps. These findings suggest that for some Holocaust survivors, impaired sleep and frequent nightmares are considerable problems even 45 years after liberation.

Examination and Elimination of Defects in Cone Casting Made of Ductile Cast Iron

Directory of Open Access Journals (Sweden)

Guzik E.

2013-12-01

Full Text Available In the scope of existing cooperation with the Foundry of Cast Iron ZM “WSK Rzeszów” Ltd. there was carried out research work of microstructure and mechanical properties in the walls of a cone casting made of ductile cast iron. The particular attention was being put to the search of the potential brittle phases which have deleterious effect on ductility and dynamic properties of highly strained use of the casting prone to the potential risk of cracks during the highly strained use.

Numerical microstructure prediction for an aluminium casting and its experimental validation

Directory of Open Access Journals (Sweden)

Unterreiter Guenter

2011-08-01

Full Text Available Virtual manufacturing based on through-process modelling becomes an evolving research area which aims at integrating diverse simulation tools to realize computer-aided design, analysis, prototyping and manufacturing. Numerical prediction of the as-cast microstructure is an initial and critical step in the whole through-process modelling chain for engineering components. A commercial software package with the capability of calculating important microstructure features for aluminium alloys is used to simulate a G-AlSi7MgCu0.5 laboratory casting. The simulated microstructure, namely grain size, secondary dendrite arm spacing and diverse phase fractions are verified experimentally. Correspondence and discrepancies are reported and discussed.

Orígenes histórico-conceptuales de la teoría de la propaganda nazi

OpenAIRE

Pineda, Antonio

2007-01-01

Este artículo trata sobre algunos factores que influyeron en la concepción nazi de la propaganda, básicamente formulada por Adolf Hitler. Tales factores son teóricos e históricos. Entre los factores teóricos o conceptuales podemos citar la psicología de las masas y la teoría clásica de la comunicación de masas. Los factores históricos son relativos a la práctica de la propaganda, ejercida por los aliados en la Primera Guerra Mundial, el movimiento socialista, el fascismo italiano y otras fuen...

Colour Metallography of Cast Iron

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2009-05-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron.Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron , uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditionalmaterials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

Period Determination of Binary Asteroid Targets Observed at Hunters Hill Observatory: May-September 2009

Science.gov (United States)

Higgins, David; Oey, Julian; Pravec, Petr

2011-01-01

Lightcurves for seven confirmed or possible binary asteroids were obtained at the Hunters Hill Observatory (HHO) and Leura Observatory from 2009 May through 2010 September: 1453 Fennia, 2501 Lohja, 3076 Garbor, 4029 Bridges, 5325 Silver, 6244 Okamoto, and (6265) 1985 TW3.

Rayleigh Number Criterion for Formation of A-Segregates in Steel Castings and Ingots

DEFF Research Database (Denmark)

Rad, M. Torabi; Kotas, Petr; Beckermann, C.

2013-01-01

A Rayleigh number-based criterion is developed for predicting the formation of A-segregates in steel castings and ingots. The criterion is calibrated using available experimental data for ingots involving 27 different steel compositions. The critical Rayleigh number above which A-segregates can b......, the primary reason for this over-prediction is persumed to be the presence of a central zone of equiaxed grains in the casting sections. A-segregates do not form when the grain structure is equiaxed. © The Minerals, Metals & Materials Society and ASM International 2013...

Casting characteristics of Al-Mg alloy 535 cast in permanent moulds

International Nuclear Information System (INIS)

Fasoyinu, F.A.; Thomson, J.; Cousineau, D.; Castles, T.; Sahoo, M.

2002-01-01

Aluminum alloy 535 could be used for automotive and marine applications because of its good corrosion resistance against mild alkaline and salt spray exposure. The majority of components from this alloy are usually produced by sand casting because it is prone to hot shortness and has poor fluidity when poured in permanent moulds. In an attempt to improve its castability in permanent moulds, casting characteristics such as casting fluidity and hot tear resistance have been studied. In addition, the effectiveness of titanium, boron, scandium, zirconium and a combination of selected elements from this group as grain refiners were evaluated. It s shown that alloy 535 exhibits good casting fluidity when poured with adequate metal superheat and that there is significant improvement in hot tear resistance following grain refinement. (author)

Applying RP-FDM Technology to Produce Prototype Castings Using the Investment Casting Method

Directory of Open Access Journals (Sweden)

M. Macků

2012-09-01

Full Text Available The research focused on the production of prototype castings, which is mapped out starting from the drawing documentation up to theproduction of the casting itself. The FDM method was applied for the production of the 3D pattern. Its main objective was to find out whatdimensional changes happened during individual production stages, starting from the 3D pattern printing through a silicon mouldproduction, wax patterns casting, making shells, melting out wax from shells and drying, up to the production of the final casting itself.Five measurements of determined dimensions were made during the production, which were processed and evaluated mathematically.A determination of shrinkage and a proposal of measures to maintain the dimensional stability of the final casting so as to meetrequirements specified by a customer were the results.

EFFECT OF ALLOYING ON TEMPERATURE OF TRANSFORMATION «PEARLITE – AUSTENITE» IN COMPLEX-ALLOYED WHITE CAST IRONS

Directory of Open Access Journals (Sweden)

T. V. Pastukhova

2014-11-01

Full Text Available Purpose. Pearlite is not accepted in the microstructure of wear resistant steels and cast irons. To prevent the pearlite by means of appropriate selection of mode of quenching requires the knowledge of the temperature of the critical points Ac1 and Ac3 for various steels and cast irons. Purpose of work is determine the effect of V (5-10% and Cr (up to 9% on the temperature range of the phase-structural transformation "pearlite®austenite in the complex-alloyed V-Cr-Mn-Ni white cast irons with spheroidal vanadium carbides. Methodology. Nine Mg-treated cast irons smelted in laboratory furnace were used for investigation. The metallographic and optical dilatometric analysis methods as well as energy-dispersive spectroscopy were used. Findings. It is shown that in irons studied the critical point Ac1 is in a temperature range from 710-780 °C (lower limit up to 730-850 °C (upper limit. The data on the concentrations of chromium and vanadium in a matrix of iron are presented, the regression equation describing the effect of vanadium and chromium on the temperature limits of the transformation «pearlite ® austenite» are obtained. Originality. It is shown that increase the chromium content leads to growth of lower and upper limits of the temperature interval of transformation "pearlite ® austenite"; vanadium increases only the upper limit of the range. It was found that the effect of chromium on the critical point Ac1 is attributed to its solubility in the metallic matrix (concentration of Cr in the austenite reaches 7%; vanadium, due to its slight dissolution in the matrix (vanadium content does not exceed 1.75%, affects the critical point indirectly by increasing of chromium concentration in the matrix due to enhanced carbon sequestration in VC carbides. Practical value. The temperature ranges of heating for quenching of V-Cr-Mn-Ni cast irons with spheroidal vanadium carbides, which provides the formation of austenitic-martensitic matrix without

Casting of microstructured shark skin surfaces and possible applications on aluminum casting parts

Directory of Open Access Journals (Sweden)

Todor Ivanov

2011-02-01

Full Text Available Within the project Functional Surfaces via Micro- and Nanoscaled Structures?which is part of the Cluster of Excellence 揑ntegrative Production Technology?established and financed by the German Research Foundation (DFG, an investment casting process to produce 3-dimensional functional surfaces down to a structural size of 1 μm on near-net-shape-casting parts has been developed. The common way to realize functional microstructures on metallic surfaces is to use laser ablation, electro discharge machining or micro milling. The handicap of these processes is their limited productivity. The approach of this project to raise the efficiency is to use the investment casting process to replicate microstructured surfaces by moulding from a laser-microstructured grand master pattern. The main research objective deals with the investigation of the single process steps of the investment casting process with regard to the moulding accuracy. Actual results concerning making of the wax pattern, suitability of ceramic mould and core materials for casting of an AlSi7Mg0.3 alloy as well as the knock-out behavior of the shells are presented. By using of the example of an intake manifold of a gasoline race car engine, a technical shark skin surface has been realized to reduce the drag of the intake air. The intake manifold consists of an air-restrictor with a defined inner diameter which is microstructured with technical shark skin riblets. For this reason the inner diameter cannot be drilled after casting and demands a very high accuracy of the casting part. A technology for the fabrication and demoulding of accurate microstructured castings are shown. Shrinkage factors of different moulding steps of the macroscopic casting part as well as the microscopic riblet structure have been examined as well.

Aluminium Foam and Magnesium Compound Casting Produced by High-Pressure Die Casting

Directory of Open Access Journals (Sweden)

Iban Vicario

2016-01-01

Full Text Available Nowadays, fuel consumption and carbon dioxide emissions are two of the main focal points in vehicle design, promoting the reduction in the weight of vehicles by using lighter materials. The aim of the work is to evaluate the influence of different aluminium foams and injection parameters in order to obtain compound castings with a compromise between the obtained properties and weight by high-pressure die cast (HPDC using aluminium foams as cores into a magnesium cast part. To evaluate the influence of the different aluminium foams and injection parameters on the final casting products quality, the type and density of the aluminium foam, metal temperature, plunger speed, and multiplication pressure have been varied within a range of suitable values. The obtained compound HPDC castings have been studied by performing visual and RX inspections, obtaining sound composite castings with aluminium foam cores. The presence of an external continuous layer on the foam surface and the correct placement of the foam to support injection conditions permit obtaining good quality parts. A HPDC processed magnesium-aluminium foam composite has been developed for a bicycle application obtaining a suitable combination of mechanical properties and, especially, a reduced weight in the demonstration part.

A 1-D Analytical Model for the Thermally Induced Stresses in the Mould Surface During Die Casting

DEFF Research Database (Denmark)

Hattel, Jesper; Hansen, Preben

1994-01-01

This paper presents an anlytically based method for predicting the normal stresses in a die mold surface exposed to a thermal load. A example of application of the method is the high-pressure di casting process where the surface stresses in critical cases lead to cracks. Expressions for the normal...... stresses as afunction of the thermal and mechanical properties have been developed for a casting both without and with a coating. Finally, the resulting relationships are derived and evaluated, with particular emphasis on the effect of the heat transfer coefficient between the casting and the mold....

El huevo de la serpiente al sur del mundo: desarrollo y supervivencia de la ciencia nazi en Chile (1908 -1951

Directory of Open Access Journals (Sweden)

Leyton, César

2014-12-01

Full Text Available The paper presents, mainly through the figure of Dr. Max Westenhoffer and in a work of Drs. Barrientos and Schirmer (1937, the connections between the development of medicine and anthropology in Chile with the development of the biological determinist thought and racism in Europe. Chilean Physicians and anthropologists as Otto Aichel, Aureliano Oyarzún, Edgardo Schirmer and Juvenal Barrientos indicate the direct relationship of the Chilean scientific program of the early twentieth century with the hereditarian and racist program, which reached its climax with the Nazi eugenics.El trabajo aborda, principalmente a partir de la figura del Dr. Max Westenhoffer y de un trabajo de los Drs. Barrientos y Schirmer de 1937, las conexiones que presenta el desarrollo de la medicina y la antropología en Chile con el pensamiento determinista biológico y racista en Europa. Médicos y antropólogos chilenos como Otto Aichel, Aureliano Oyarzún, Edgardo Schirmer y Juvenal Barrientos dan cuenta de la relación directa de una parte del programa científico chileno de la primera mitad del siglo XX con el programa hereditarista y racista, que alcanzó su punto cúlmine con la eugenesia y la antropología nazi.

Inferring the demographic history of African farmers and pygmy hunter-gatherers using a multilocus resequencing data set.

Directory of Open Access Journals (Sweden)

Etienne Patin

2009-04-01

Full Text Available The transition from hunting and gathering to farming involved a major cultural innovation that has spread rapidly over most of the globe in the last ten millennia. In sub-Saharan Africa, hunter-gatherers have begun to shift toward an agriculture-based lifestyle over the last 5,000 years. Only a few populations still base their mode of subsistence on hunting and gathering. The Pygmies are considered to be the largest group of mobile hunter-gatherers of Africa. They dwell in equatorial rainforests and are characterized by their short mean stature. However, little is known about the chronology of the demographic events-size changes, population splits, and gene flow--ultimately giving rise to contemporary Pygmy (Western and Eastern groups and neighboring agricultural populations. We studied the branching history of Pygmy hunter-gatherers and agricultural populations from Africa and estimated separation times and gene flow between these populations. We resequenced 24 independent noncoding regions across the genome, corresponding to a total of approximately 33 kb per individual, in 236 samples from seven Pygmy and five agricultural populations dispersed over the African continent. We used simulation-based inference to identify the historical model best fitting our data. The model identified included the early divergence of the ancestors of Pygmy hunter-gatherers and farming populations approximately 60,000 years ago, followed by a split of the Pygmies' ancestors into the Western and Eastern Pygmy groups approximately 20,000 years ago. Our findings increase knowledge of the history of the peopling of the African continent in a region lacking archaeological data. An appreciation of the demographic and adaptive history of African populations with different modes of subsistence should improve our understanding of the influence of human lifestyles on genome diversity.

Applying RP-FDM Technology to Produce Prototype Castings Using the Investment Casting Method

Directory of Open Access Journals (Sweden)

Macků M.

2012-09-01

Full Text Available The research focused on the production of prototype castings, which is mapped out starting from the drawing documentation up to the production of the casting itself. The FDM method was applied for the production of the 3D pattern. Its main objective was to find out what dimensional changes happened during individual production stages, starting from the 3D pattern printing through a silicon mould production, wax patterns casting, making shells, melting out wax from shells and drying, up to the production of the final casting itself. Five measurements of determined dimensions were made during the production, which were processed and evaluated mathematically. A determination of shrinkage and a proposal of measures to maintain the dimensional stability of the final casting so as to meet requirements specified by a customer were the results.

Casting AISI 316 steel by gel cast

International Nuclear Information System (INIS)

Ozols, A; Thern, G; Rozenberg, S; Barreiro, M; Marajofsky, A

2004-01-01

The feasibility of producing AISI 316 steel components from their powders and avoiding their compaction is analyzed. A casting technique is tested that is similar to gel casting, used for ceramic materials. In the initial stage, the process consists of the formulation of a concentrated barbotine of powdered metal in a solution of water soluble organic monomers, which is cast in a mold and polymerized in situ to form a raw piece in the shape of the cavity. The process can be performed under controlled conditions using barbotines with a high monomer content from the acrylimide family. Then, the molded piece is slowly heated until the polymer is eliminated, and it is sintered at temperatures of 1160 o C to 1300 o C under a dry hydrogen atmosphere, until the desired densities are attained. The density and micro structure of the materials obtained are compared with those for the materials compacted and synthesized by the conventional processes. The preliminary results show the feasibility of the process for the production of certain kinds of structural components (CW)

Direct strip casting of steel - historical perspective and future direction

International Nuclear Information System (INIS)

Manohar, P.A.; Hunter, A.; Ferry, M.

2000-01-01

The commercialisation of direct strip casting (DSC) of steel represents the realisation of a dream cherished by engineers for over one hundred and fifty years. The story of the global competition for DSC of steel, that has ingredients of romanticism of chasing of a dream, adventure and intrigue, is being played out across continents over dozens of decades with an interplay of setbacks and successes. At this stage, DSC is set to make a profound impact on the steelmaking landscape. This paper reviews the important milestones in this compelling story, presents the current status and then gazes into the crystal ball in an attempt to predict which turn the story may take in the near future. The constraints and critical challenges for the successful commercialisation of DSC are highlighted. Recent results are discussed relating the production process to quality control and properties of unalloyed, low carbon strip-cast steels. future metallurgical challenges include a better understanding of solidification mechanism during high-speed casting and secondary processing variables affecting the final microstructure of austenitic grains

From Head-hunter to Organ-thief: Verisimilitude, Doubt and Plausible Worlds in Indonesia and Beyond

DEFF Research Database (Denmark)

Bubandt, Nils Ole

2017-01-01

their victims and using the human heads in construction rituals as they used to do, head-hunters are now allegedly harvesting the victims’ organs for sale on the international organ market. Based on a comparison of ethnographic material from North Maluku, a province in the eastern part of Indonesia, and news...... reports I trace the shift from head-hunting to organ theft and suggest that this plasticity is not merely a symbolic representation of changing political and economic realities. Rather, I argue, the organ-stealing head-hunters are part of a global travelling package that includes and entangles organ...... trafficking practices, media accounts, political imaginaries, and social anxieties within the same field of reality and possibility, a field of verisimilitude in which fiction and fact, rumour and reality, are fundamentally blurred. The article proposes a ‘more-than-representational’ approach to the organ...

Symptomatic stent cast.

LENUS (Irish Health Repository)

Keohane, John

2012-02-03

Biliary stent occlusion is a major complication of endoscopic stent insertion and results in repeat procedures. Various theories as to the etiology have been proposed, the most frequently studied is the attachment of gram negative bacteria within the stent. Several studies have shown prolongation of stent patency with antibiotic prophylaxis. We report the case of stent occlusion from a cast of a previously inserted straight biliary stent; a "stent cast" in an 86-year-old woman with obstructive jaundice. This was retrieved with the lithotrypter and she made an uneventful recovery. This is the first reported case of a biliary stent cast.

Fracture Mechanisms in Steel Castings

Directory of Open Access Journals (Sweden)

Stradomski Z.

2013-09-01

Full Text Available The investigations were inspired with the problem of cracking of steel castings during the production process. A single mechanism of decohesion - the intergranular one - occurs in the case of hot cracking, while a variety of structural factors is decisive for hot cracking initiation, depending on chemical composition of the cast steel. The low-carbon and low-alloyed steel castings crack due to the presence of the type II sulphides, the cause of cracking of the high-carbon tool cast steels is the net of secondary cementite and/or ledeburite precipitated along the boundaries of solidified grains. Also the brittle phosphor and carbide eutectics precipitated in the final stage solidification are responsible for cracking of castings made of Hadfield steel. The examination of mechanical properties at 1050°C revealed low or very low strength of high-carbon cast steels.

Modelling the Cast Component Weight in Hot Chamber Die Casting using Combined Taguchi and Buckingham's π Approach

Science.gov (United States)

Singh, Rupinder

2018-02-01

Hot chamber (HC) die casting process is one of the most widely used commercial processes for the casting of low temperature metals and alloys. This process gives near-net shape product with high dimensional accuracy. However in actual field environment the best settings of input parameters is often conflicting as the shape and size of the casting changes and one have to trade off among various output parameters like hardness, dimensional accuracy, casting defects, microstructure etc. So for online inspection of the cast components properties (without affecting the production line) the weight measurement has been established as one of the cost effective method (as the difference in weight of sound and unsound casting reflects the possible casting defects) in field environment. In the present work at first stage the effect of three input process parameters (namely: pressure at 2nd phase in HC die casting; metal pouring temperature and die opening time) has been studied for optimizing the cast component weight `W' as output parameter in form of macro model based upon Taguchi L9 OA. After this Buckingham's π approach has been applied on Taguchi based macro model for the development of micro model. This study highlights the Taguchi-Buckingham based combined approach as a case study (for conversion of macro model into micro model) by identification of optimum levels of input parameters (based on Taguchi approach) and development of mathematical model (based on Buckingham's π approach). Finally developed mathematical model can be used for predicting W in HC die casting process with more flexibility. The results of study highlights second degree polynomial equation for predicting cast component weight in HC die casting and suggest that pressure at 2nd stage is one of the most contributing factors for controlling the casting defect/weight of casting.

Assessment of risk to aquatic biota from elevated salinity -- a case study from the Hunter River, Australia.

Science.gov (United States)

Muschal, Monika

2006-05-01

An ecological risk assessment was performed on salinity levels of the Hunter River and its tributaries to respond to concerns that high salinity may be damaging aquatic ecosystems. Probabilistic techniques were used to assess likelihood and consequence, and hence the risk to aquatic biota from salinity. Continuous electrical conductivity distributions were used to describe the likelihood that high salinity would occur (exposure dataset) and toxicity values were compiled from the limited literature sources available to describe the consequence of high salinity (effects dataset). The assessment was preliminary in the sense that it modelled risk on the basis of existing data and did not undertake site-specific toxicity testing. Some sections of the Hunter River catchment have geologies that are saline because of their marine origins. Catchment development has increased the liberation rates of salts into surface-waters. Such modifying activities include coal-mining, power generation and land clearing. The aquatic biota of tributaries had a greater risk of impairment from high salinity than that of the Hunter River. High salinities in the tributaries were attributed to the combined factors of naturally saline geologies, increased liberation of salts due to modification of the landscape, and reduced dilution by flushing flows. A salinity guideline trigger value of 1100 mg L(-1) was recommended.

Questioning dehumanization: intersubjective dimensions of violence in the Nazi concentration and death camps.

Science.gov (United States)

Lang, Johannes

2010-01-01

Using the violence in Nazi concentration and death camps as its case study, this article explores the theoretical and empirical limits of the concept of dehumanization-the process by which the perpetrators come to perceive their victims as "not human" or "subhuman"-and delineates appropriate alternatives to the concept. The author argues that excessive violence is commonly misunderstood and misrepresented as dehumanization because it seems to aim at effacing the victim's human appearance. Yet, it is more accurate to see such violence as a ploy to extend the perpetrator's sense of power over another human being; it is precisely the human quality of the interaction that provides the violence with much of its meaning. The argument has a moral edge, demonstrating that the concept ultimately reduces, or displaces, the true horror of the killer-victim interaction.

NUMERICAL MODELING OF HARDENING OF UNINTERRUPTEDLY-CASTED BRONZE CASTING

Directory of Open Access Journals (Sweden)

E. I. Marukovich

2009-01-01

Full Text Available The three-dimensional numerical model for calculation of thermal fields during solidification of continuously casted bronze casting is developed. Coefficients of heat transfer on borders of calculation areas on the basis of the solution of inverse heat transfer conduction problem are determined. The analysis of thermal fields, depending on loop variables of drawing and the sizes of not cooled zone of crystallizer is curried out.

Indice de Indices en la Biblioteca de Hunter College para el Estudiante Hispano.

Science.gov (United States)

Talero Bielsa, Alberto; And Others

Designed for Spanish-speaking students of Hunter College of the City University of New York, this guide explains the use of 70 English-language indexes found in the college library. The explanations are given in Spanish in order to simplify the process of library research for students who are not completely comfortable with English. Each index is…

Differentially expressed regulatory genes in honey bee caste development

Science.gov (United States)

Hepperle, C.; Hartfelder, K.

2001-03-01

In the honey bee, an eminently fertile queen with up to 200 ovarioles per ovary monopolizes colony level reproduction. In contrast, worker bees have only few ovarioles and are essentially sterile. This phenotype divergence is a result of caste-specifically modulated juvenile hormone and ecdysteroid titers in larval development. In this study we employed a differential-display reverse transcription (DDRT)-PCR protocol to detect ecdysteroid-regulated gene expression during a critical phase of caste development. We identified a Ftz-F1 homolog and a Cut-like transcript. Ftz-F1 could be a putative element of the metamorphic ecdysone response cascade of bees, whereas Cut-like proteins are described as transcription factors involved in maintaining cellular differentiation states. The downregulation of both factors can be interpreted as steps in the metamorphic degradation of ovarioles in worker-bee ovaries.

Near-source surface seismic measurements for the NPE, NPE Calibration, Hunter`s Trophy, and Mineral Quarry

Energy Technology Data Exchange (ETDEWEB)

Reinke, R.E.; Leverette, J.A. [Field Command Defense Nuclear Agency, Kirtland AFB, NM (United States); Stump, B.W. [Los Alamos National Laboratory, NM (United States)] [and others

1994-12-31

An extensive seismic network was deployed on the surface of Rainier Mesa for both the Non-Proliferation Experiment (NPE) Calibration shot as well as the full scale NPE event. This network was very similar to previous deployments for the nuclear events MISTY ECHO, MINERAL QUARRY, and HUNTERS TROPHY. For the full scale NPE event three-component accelerometers and seismometers were fielded at 32 sites across the mesa. A slightly smaller network with 28 stations was in operation for the 300 pound NPE calibration event. The mesa top array included both accelerometers and seismometers. The accelerometers were used to obtain data from the main NPE event while the seismometers with their higher sensitivity were used to record the 300 pound cal shot and several hundred after events from the NPE. Large spatial variations in ground motion are evident in both the full mesa data set as well as a small (80 m on a side) aperture, 9-element triangular array. This paper summarizes the data and discusses wave propagation effects. A companion paper presents a comparative source analysis.

Casting thermal simulation

International Nuclear Information System (INIS)

Shamsuddin bin Sulaiman

1994-01-01

The whole of this study is concerned with process simulation in casting processes. This study describes the application of the finite element method as an aid to simulating the thermal design of a high pressure die casting die by analysing the cooling transients in the casting cycle. Two types of investigation were carried out to model the linear and non-linear cooling behavior with consideration of a thermal interface effect. The simulated cooling for different stages were presented in temperature contour form. These illustrate the successful application of the Finite Element Method to model the process and they illustrate the significance of the thermal interface at low pressure

Clean Metal Casting; FINAL

International Nuclear Information System (INIS)

Makhlouf M. Makhlouf; Diran Apelian

2002-01-01

The objective of this project is to develop a technology for clean metal processing that is capable of consistently providing a metal cleanliness level that is fit for a given application. The program has five tasks: Development of melt cleanliness assessment technology, development of melt contamination avoidance technology, development of high temperature phase separation technology, establishment of a correlation between the level of melt cleanliness and as cast mechanical properties, and transfer of technology to the industrial sector. Within the context of the first task, WPI has developed a standardized Reduced Pressure Test that has been endorsed by AFS as a recommended practice. In addition, within the context of task1, WPI has developed a melt cleanliness sensor based on the principles of electromagnetic separation. An industrial partner is commercializing the sensor. Within the context of the second task, WPI has developed environmentally friendly fluxes that do not contain fluorine. Within the context of the third task, WPI modeled the process of rotary degassing and verified the model predictions with experimental data. This model may be used to optimize the performance of industrial rotary degassers. Within the context of the fourth task, WPI has correlated the level of melt cleanliness at various foundries, including a sand casting foundry, a permanent mold casting foundry, and a die casting foundry, to the casting process and the resultant mechanical properties. This is useful in tailoring the melt cleansing operations at foundries to the particular casting process and the desired properties of cast components

Do individual differences in use of cover habitat affect red deer`s (Cervus elaphus) probability of being shot by hunters?

OpenAIRE

Stamnes, Inga

2014-01-01

The purpose of this study was to test if red deer (Cervus elaphus) habitat use affects their risk of being shot by hunters. I compared habitat use of 20 GPS-marked red deer that survived the hunting season with 20 individuals that were shot. I predicted that shot red deer used open areas within forested habitats with a better visibility for hunters than surviving red deer. I also predicted that the use of less risky habitat is costly in terms of foraging opportunity, with shot animals using b...

14 CFR 23.621 - Casting factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Casting factors. 23.621 Section 23.621... Casting factors. (a) General. The factors, tests, and inspections specified in paragraphs (b) through (d... structural castings except castings that are pressure tested as parts of hydraulic or other fluid systems and...

Hair casts

OpenAIRE

Sweta S Parmar; Kirti S Parmar; Bela J Shah

2014-01-01

Hair casts or pseudonits are circumferential concretions, which cover the hair shaft in such a way that, it could be easily removed. They are thin, cylindrical, and elongated in length. We present an unusual case of an 8-year-old girl presenting with hair casts. Occurrence of these is unusual, and they may have varied associations. This patient was suffering from developmental delay. It is commonly misdiagnosed as and very important to differentiate from pediculosis capitis.

Effect of inlet geometry on macrosegregation during the direct chill casting of 7050 alloy billets: experiments and computer modelling

International Nuclear Information System (INIS)

Zhang, L; Miroux, A; Subroto, T; Katgerman, L; Eskin, D G

2012-01-01

Controlling macrosegregation is one of the major challenges in direct-chill (DC) casting of aluminium alloys. In this paper, the effect of the inlet geometry (which influences the melt distribution) on macrosegregation during the DC casting of 7050 alloy billets was studied experimentally and by using 2D computer modelling. The ALSIM model was used to determine the temperature and flow patterns during DC casting. The results from the computer simulations show that the sump profiles and flow patterns in the billet are strongly influenced by the melt flow distribution determined by the inlet geometry. These observations were correlated to the actual macrosegregation patterns found in the as-cast billets produced by having two different inlet geometries. The macrosegregation analysis presented here may assist in determining the critical parameters to consider for improving the casting of 7XXX aluminium alloys.

Effect of inlet geometry on macrosegregation during the direct chill casting of 7050 alloy billets: experiments and computer modelling

Science.gov (United States)

Zhang, L.; Eskin, D. G.; Miroux, A.; Subroto, T.; Katgerman, L.

2012-07-01

Controlling macrosegregation is one of the major challenges in direct-chill (DC) casting of aluminium alloys. In this paper, the effect of the inlet geometry (which influences the melt distribution) on macrosegregation during the DC casting of 7050 alloy billets was studied experimentally and by using 2D computer modelling. The ALSIM model was used to determine the temperature and flow patterns during DC casting. The results from the computer simulations show that the sump profiles and flow patterns in the billet are strongly influenced by the melt flow distribution determined by the inlet geometry. These observations were correlated to the actual macrosegregation patterns found in the as-cast billets produced by having two different inlet geometries. The macrosegregation analysis presented here may assist in determining the critical parameters to consider for improving the casting of 7XXX aluminium alloys.

Evidence for early hunters beneath the Great Lakes.

Science.gov (United States)

O'Shea, John M; Meadows, Guy A

2009-06-23

Scholars have hypothesized that the poorly understood and rarely encountered archaeological sites from the terminal Paleoindian and Archaic periods associated with the Lake Stanley low water stage (10,000-7,500 BP) are lost beneath the modern Great Lakes. Acoustic and video survey on the Alpena-Amberley ridge, a feature that would have been a dry land corridor crossing the Lake Huron basin during this time period, reveals the presence of a series of stone features that match, in form and location, structures used for caribou hunting in both prehistoric and ethnographic times. These results present evidence for early hunters on the Alpena-Amberley corridor, and raise the possibility that intact settlements and ancient landscapes are preserved beneath Lake Huron.

HFIR Fuel Casting Support

Energy Technology Data Exchange (ETDEWEB)

Imhoff, Seth D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gibbs, Paul Jacob [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Solis, Eunice Martinez [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-28

Process exploration for fuel production for the High Flux Isotope Reactor (HFIR) using cast LEU-10wt.%Mo as an initial processing step has just begun. This project represents the first trials concerned with casting design and quality. The studies carried out over the course of this year and information contained in this report address the initial mold development to be used as a starting point for future operations. In broad terms, the final billet design is that of a solid rolling blank with an irregular octagonal cross section. The work covered here is a comprehensive view of the initial attempts to produce a sound casting. This report covers the efforts to simulate, predict, cast, inspect, and revise the initial mold design.

Mitigating the health impacts of a natural disaster--the June 2007 long-weekend storm in the Hunter region of New South Wales.

Science.gov (United States)

Cretikos, Michelle A; Merritt, Tony D; Main, Kelly; Eastwood, Keith; Winn, Linda; Moran, Lucille; Durrheim, David N

A severe storm that began on Thursday, 7 June 2007 brought heavy rains and gale-force winds to Newcastle, Gosford, Wyong, Sydney, and the Hunter Valley region of New South Wales. The storm caused widespread flooding and damage to houses, businesses, schools and health care facilities, and damaged critical infrastructure. Ten people died as a result of the storm, and approximately 6000 residents were evacuated. A natural disaster was declared in 19 local government areas, with damage expected to reach $1.5 billion. Additional demands were made on clinical health services, and interruption of the electricity supply to over 200,000 homes and businesses, interruption of water and gas supplies, and sewerage system pump failures presented substantial public health threats. A public health emergency operations centre was established by the Hunter New England Area Health Service to coordinate surveillance activities, respond to acute public health issues and prevent disease outbreaks. Public health activities focused on providing advice, cooperating with emergency service agencies, monitoring water quality and availability, preventing illness from sewage-contaminated flood water, assessing environmental health risks, coordinating the local government public health response, and surveillance for storm-related illness and disease outbreaks, including gastroenteritis. The local ABC (Australian Broadcasting Corporation) radio station played a key role in disseminating public health advice. A household survey conducted within a fortnight of the storm established that household preparedness and storm warning systems could be improved.

Analysis of the Causes of Cracks in a Thick-Walled Bush Made of Die-Cast Aluminum Bronze

Directory of Open Access Journals (Sweden)

Pisarek B.P.

2016-12-01

Full Text Available For the die casting conditions of aluminium bronzes assumed based on the literature data, a thick-walled bush was cast, made of complex aluminium bronze (Cu-Al-Fe-Ni-Cr. After the cast was removed from the mould, cracks were observed inside it. In order to identify the stage in the technological production process at which, potentially, the formation of stresses damaging the continuity of the microstructure created in the cast was possible (hot cracking and/or cold cracking, a computer simulation was performed. The article presents the results of the computer simulation of the process of casting the material into the gravity die as well as solidifying and cooling of the cast in the shape of a thick-walled bush. The simulation was performed with the use of the MAGMA5 program and by application of the CuAl10Ni5,5Fe4,5 alloy from the MAGMA5 program database. The results were compared with the location of the defects identified in the actual cast. As a result of the simulation of the die-casting process of this bush, potential regions were identified where significant principal stresses accumulate, which can cause local hot and cold cracking. Until now, no research has been made of die-cast aluminium bronzes with a Cr addition. Correlating the results of the computer simulation validated by the analysis of the actual cast made it possible to clearly determine the critical regions in the cast exposed to cracking and point to the causes of its occurrence. Proposals of changes in the bush die casting process were elaborated, in order to avoid hot tearing and cold cracking. The article discusses the results of preliminary tests being a prologue to the optimization of the die-casting process parameters of complex aluminium bronze thick-walled bushs.

Engineering design of centrifugal casting machine

Science.gov (United States)

Kusnowo, Roni; Gunara, Sophiadi

2017-06-01

Centrifugal casting is a metal casting process in which metal liquid is poured into a rotating mold at a specific temperature. Given round will generate a centrifugal force that will affect the outcome of the casting. Casting method is suitable in the manufacture of the casting cylinder to obtain better results. This research was performed to design a prototype machine by using the concept of centrifugal casting. The design method was a step-by-step systematic approach in the process of thinking to achieve the desired goal of realizing the idea and build bridges between idea and the product. Design process was commenced by the conceptual design phase and followed by the embodiment design stage and detailed design stage. With an engineering design process based on the method developed by G. E. Dieter, draft prototype of centrifugal casting machine with dimension of 550×450×400 mm, ¼ HP motor power, pulley and belt mechanism, diameter of 120-150mm, simultaneously with the characteristics of simple casting product, easy manufacture and maintenance, and relatively inexpensive, was generated.

Origin and diet of the prehistoric hunter-gatherers on the mediterranean island of Favignana (Ègadi Islands, Sicily.

Directory of Open Access Journals (Sweden)

Marcello A Mannino

Full Text Available Hunter-gatherers living in Europe during the transition from the late Pleistocene to the Holocene intensified food acquisition by broadening the range of resources exploited to include marine taxa. However, little is known on the nature of this dietary change in the Mediterranean Basin. A key area to investigate this issue is the archipelago of the Ègadi Islands, most of which were connected to Sicily until the early Holocene. The site of Grotta d'Oriente, on the present-day island of Favignana, was occupied by hunter-gatherers when Postglacial environmental changes were taking place (14,000-7,500 cal BP. Here we present the results of AMS radiocarbon dating, palaeogenetic and isotopic analyses undertaken on skeletal remains of the humans buried at Grotta d'Oriente. Analyses of the mitochondrial hypervariable first region of individual Oriente B, which belongs to the HV-1 haplogroup, suggest for the first time on genetic grounds that humans living in Sicily during the early Holocene could have originated from groups that migrated from the Italian Peninsula around the Last Glacial Maximum. Carbon and nitrogen isotope analyses show that the Upper Palaeolithic and Mesolithic hunter-gatherers of Favignana consumed almost exclusively protein from terrestrial game and that there was only a slight increase in marine food consumption from the late Pleistocene to the early Holocene. This dietary change was similar in scale to that at sites on mainland Sicily and in the rest of the Mediterranean, suggesting that the hunter-gatherers of Grotta d'Oriente did not modify their subsistence strategies specifically to adapt to the progressive isolation of Favignana. The limited development of technologies for intensively exploiting marine resources was probably a consequence both of Mediterranean oligotrophy and of the small effective population size of these increasingly isolated human groups, which made innovation less likely and prevented transmission of

Origin and Diet of the Prehistoric Hunter-Gatherers on the Mediterranean Island of Favignana (Ègadi Islands, Sicily)

Science.gov (United States)

Mannino, Marcello A.; Catalano, Giulio; Talamo, Sahra; Mannino, Giovanni; Di Salvo, Rosaria; Schimmenti, Vittoria; Lalueza-Fox, Carles; Messina, Andrea; Petruso, Daria; Caramelli, David; Richards, Michael P.; Sineo, Luca

2012-01-01

Hunter-gatherers living in Europe during the transition from the late Pleistocene to the Holocene intensified food acquisition by broadening the range of resources exploited to include marine taxa. However, little is known on the nature of this dietary change in the Mediterranean Basin. A key area to investigate this issue is the archipelago of the Ègadi Islands, most of which were connected to Sicily until the early Holocene. The site of Grotta d’Oriente, on the present-day island of Favignana, was occupied by hunter-gatherers when Postglacial environmental changes were taking place (14,000-7,500 cal BP). Here we present the results of AMS radiocarbon dating, palaeogenetic and isotopic analyses undertaken on skeletal remains of the humans buried at Grotta d’Oriente. Analyses of the mitochondrial hypervariable first region of individual Oriente B, which belongs to the HV-1 haplogroup, suggest for the first time on genetic grounds that humans living in Sicily during the early Holocene could have originated from groups that migrated from the Italian Peninsula around the Last Glacial Maximum. Carbon and nitrogen isotope analyses show that the Upper Palaeolithic and Mesolithic hunter-gatherers of Favignana consumed almost exclusively protein from terrestrial game and that there was only a slight increase in marine food consumption from the late Pleistocene to the early Holocene. This dietary change was similar in scale to that at sites on mainland Sicily and in the rest of the Mediterranean, suggesting that the hunter-gatherers of Grotta d’Oriente did not modify their subsistence strategies specifically to adapt to the progressive isolation of Favignana. The limited development of technologies for intensively exploiting marine resources was probably a consequence both of Mediterranean oligotrophy and of the small effective population size of these increasingly isolated human groups, which made innovation less likely and prevented transmission of fitness

Clean Cast Steel Technology, Phase IV

Energy Technology Data Exchange (ETDEWEB)

Charles E. Bates

2003-02-24

The objective of the Clean Cast Steel Technology Program was to improve casting product quality by removing or minimizing oxide defects and to allow the production of higher integrity castings for high speed machining lines. Previous research has concentrated on macro-inclusions that break, chip, or crack machine tool cutters and drills and cause immediate shutdown of the machining lines. The overall goal of the project is to reduce the amount of surface macro-inclusions and improve the machinability of steel castings. Macro-inclusions and improve the machinability of steel castings. Macro-inclusions have been identified by industrial sponsors as a major barrier to improving the quality and marketability of steel castings.

The evaluation of dynamic cracking resistance of chosen casting alloys in the aspect of the impact bending test

Directory of Open Access Journals (Sweden)

J.Sadowski

2008-10-01

Full Text Available The increase of quality and durability of produced casting alloys can be evaluated on the base of material tests performed on a high level. One of such modern test methods are tests of the dynamic damage process of materials and the evaluation on the base of obtained courses F(f, F(t of parameters of dynamic cracking resistance KId, JId, performed with the usage of instrumented Charpy pendulums. In the paper there was presented the evaluation of dynamic cracking resistance parameters of casting alloys such as: AK12 aluminum alloy, L20G cast steel and spheroid cast iron. The methodology of the evaluation of that parameters was described and their change as well, for the AK12 alloy with the cold work different level, L20G cast steel cooled from different temperatures in the range +20oC -60oC, and for the spheroid cast iron in different stages of treatment i.e. raw state, after normalization, spheroid annealing and graphitizing annealing.Obtained parameters of dynamic cracking resistance KId, JId of tested casting alloys enabled to define the critical value of the ad defect that can be tolerated by tested castings in different work conditions with impact loadings.

The Practice of "Grammar Naziness" on Facebook in Relation to Generating Grammar Learning: A Motivation or Demotivation in Updating Statuses in English on Facebook

Science.gov (United States)

Amin, Noraziah Mohd; Abdul Rahman, Noor Azam; Sharipudin, Mohamad-Noor; Abu Bakar, Mohd Saifulnizam

2016-01-01

It is common for learners of English to make grammatical errors in their English Facebook posts that can be noticeable on their walls, which this perhaps as a result, influences the other Facebook users who know about the language to perform the unofficial duty as grammar Nazis and correct the errors. Thus, this research aims to examine if Malay…

76 FR 46149 - Financial Assistance: Wildlife Restoration, Sport Fish Restoration, Hunter Education and Safety

Science.gov (United States)

2011-08-01

... these regulations on June 10, 2010, to address changes in law, regulation, policy, technology, and... Service 50 CFR Part 80 Financial Assistance: Wildlife Restoration, Sport Fish Restoration, Hunter... 80 [Docket No. FWS-R9-WSR-2009-0088; 91400-5110-POLI-7B; 91400-9410-POLI- 7B] RIN 1018-AW65 Financial...

Deposition of ultrafine aerosols in F344/N rat nasal casts

Energy Technology Data Exchange (ETDEWEB)

Cheng, Y S; Hansen, G K; Su, Y F; Yeh, H C; Morgan, K T [Chemical Industry Institute of Toxicology, Research Triangle Park, NC (United States)

1988-12-01

Determination of regional respiratory deposition of inhaled aerosols is critical for evaluation of the health effects of air pollutants. Information on deposition of larger particles (> 0.02 {mu}m) in the nasal passages of laboratory animals is available; the deposition fraction increases with increasing particle size. Little information on ultrafine particles less than 0.2 {mu}m is available. Molds (models) were prepared from replica casts of the nasal passages of F344/N rats, using clear casting plastic. Total deposition of ultrafine aerosols in these casts was then determined using a unidirectional flow system. Measured pressure drops in the casts were a function of flow rate to the power of 1.4-1.6, indicating that the flow through the nasal passage was not laminar. Deposition data were obtained from these casts, using monodisperse sodium chloride aerosols with particle size ranging from 0.2 to 0.005 {mu}m, at inspiratory and expiratory flow rates of 200 to 600 cc/min. Similar deposition data were obtained for the three casts studied. The deposition efficiency was greatest for the smallest particles, and decreased with increasing particle size and flow rate, indicating that diffusion was the dominant mechanism for deposition. At an inspiratory flow rate of 400 cc/min, which is comparable to a respiratory minute volume of 200 cc/min for mature male F344/N rats, deposition efficiencies reached 40 and 70% for 0.01 and 0.005 {mu}m particles, respectively. Turbulent diffusion was considered to be the dominant mechanism for deposition of ultrafine particles in the nasal passage. This information is important for understanding the toxicity and carcinogenicity of submicrometer particles, including diesel soot, radon progeny and vapors. (author)

Impact of as-cast structure on structure and properties of twin-roll cast AA8006 alloy

Energy Technology Data Exchange (ETDEWEB)

Slamova, M.; Ocenasek, V. [Vyzkumny Ustav Kovu, Panenske Brezany (Czechoslovakia); Juricek, Z.

2000-07-01

Sheet production by twin-roll casting (TRC) process is a well established practice in the aluminium industry because it offers several advantages in comparison with DC casting and hot rolling, esp. lower production and investment costs. Thin strips exhibiting a combination of good strength and high ductility are required for various applications and for this reason alloys with higher Fe and Mn content such as AA 8006 displace AA 1xxx or AA 8011 alloys. However, TRC of AA 8006 strips involves several problems, e.g. casting conditions and subsequent treatment procedures need fine tuning. The results of an investigation of the effect of casting conditions on structure and properties of AA 8006 strips are presented. The influence of casting speed, grain refiner addition, molten metal level in the tundish, tip setback and roll separating force was investigated. The impact of imperfect as-cast structure on structure and properties of thin strips in H22 and O tempers was evaluated and compared with strips from good as-cast material. (orig.)

Materials for Advanced Ultrasupercritical Steam Turbines Task 4: Cast Superalloy Development

Energy Technology Data Exchange (ETDEWEB)

Thangirala, Mani

2015-09-30

The Steam Turbine critical stationary structural components are high integrity Large Shell and Valve Casing heavy section Castings, containing high temperature steam under high pressures. Hence to support the development of advanced materials technology for use in an AUSC steam turbine capable of operating with steam conditions of 760°C (1400°F) and 35 Mpa (5000 psia), Casting alloy selection and evaluation of mechanical, metallurgical properties and castability with robust manufacturing methods are mandated. Alloy down select from Phase 1 based on producability criteria and creep rupture properties tested by NETL-Albany and ORNL directed the consortium to investigate cast properties of Haynes 282 and Haynes 263. The goals of Task 4 in Phase 2 are to understand a broader range of mechanical properties, the impact of manufacturing variables on those properties. Scale up the size of heats to production levels to facilitate the understanding of the impact of heat and component weight, on metallurgical and mechanical behavior. GE Power & Water Materials and Processes Engineering for the Phase 2, Task 4.0 Castings work, systematically designed and executed casting material property evaluation, multiple test programs. Starting from 15 lbs. cylinder castings to world’s first 17,000 lbs. poured weight, heavy section large steam turbine partial valve Haynes 282 super alloy casting. This has demonstrated scalability of the material for steam Turbine applications. Activities under Task 4.0, Investigated and characterized various mechanical properties of Cast Haynes 282 and Cast Nimonic 263. The development stages involved were: 1) Small Cast Evaluation: 4 inch diam. Haynes 282 and Nimonic 263 Cylinders. This provided effects of liquidus super heat range and first baseline mechanical data on cast versions of conventional vacuum re-melted and forged Ni based super alloys. 2) Step block castings of 300 lbs. and 600 lbs. Haynes 282 from 2 foundry heats were evaluated which

Relationship between casting modulus and grain size in cast A356 aluminium alloys

International Nuclear Information System (INIS)

Niklas, A; Abaunza, U; Fernández-Calvo, A I; Lacaze, J

2012-01-01

Microstructure of Al-Si alloy castings depends most generally on melt preparation and on the cooling rate imposed by the thermal modulus of the component. In the case of Al-Si alloys, emphasis is put during melt preparation on refinement of pro-eutectic (Al) grains and on modification of the Al-Si eutectic. Thermal analysis has been used since long to check melt preparation before casting, i.e. by analysis of the cooling curve during solidification of a sample cast in an instrumented cup. The conclusions drawn from such analysis are however valid for the particular cooling conditions of the cups. It thus appeared of interest to investigate how these conclusions could extrapolate to predict microstructure in complicated cast parts showing local changes in the solidification conditions. For that purpose, thermal analysis cups and instrumented sand and die castings with different thermal moduli and thus cooling rates have been made, and the whole set of cooling curves thus recorded has been analysed. A statistical analysis of the characteristic features of the cooling curves related to grain refinement in sand and die castings allowed determining the most significant parameters and expressing the cube of grain size as a polynomial of these parameters. After introduction of a further parameter quantifying melt refining an excellent correlation, with a R 2 factor of 0.99 was obtained.

Gut microbiome of the Hadza hunter-gatherers.

Science.gov (United States)

Schnorr, Stephanie L; Candela, Marco; Rampelli, Simone; Centanni, Manuela; Consolandi, Clarissa; Basaglia, Giulia; Turroni, Silvia; Biagi, Elena; Peano, Clelia; Severgnini, Marco; Fiori, Jessica; Gotti, Roberto; De Bellis, Gianluca; Luiselli, Donata; Brigidi, Patrizia; Mabulla, Audax; Marlowe, Frank; Henry, Amanda G; Crittenden, Alyssa N

2014-04-15

Human gut microbiota directly influences health and provides an extra means of adaptive potential to different lifestyles. To explore variation in gut microbiota and to understand how these bacteria may have co-evolved with humans, here we investigate the phylogenetic diversity and metabolite production of the gut microbiota from a community of human hunter-gatherers, the Hadza of Tanzania. We show that the Hadza have higher levels of microbial richness and biodiversity than Italian urban controls. Further comparisons with two rural farming African groups illustrate other features unique to Hadza that can be linked to a foraging lifestyle. These include absence of Bifidobacterium and differences in microbial composition between the sexes that probably reflect sexual division of labour. Furthermore, enrichment in Prevotella, Treponema and unclassified Bacteroidetes, as well as a peculiar arrangement of Clostridiales taxa, may enhance the Hadza's ability to digest and extract valuable nutrition from fibrous plant foods.

Optimizing the Gating System for Steel Castings

Directory of Open Access Journals (Sweden)

Jan Jezierski

2018-04-01

Full Text Available The article presents the attempt to optimize a gating system to produce cast steel castings. It is based on John Campbell’s theory and presents the original results of computer modelling of typical and optimized gating systems for cast steel castings. The current state-of-the-art in cast steel casting foundry was compared with several proposals of optimization. The aim was to find a compromise between the best, theoretically proven gating system version, and a version that would be affordable in industrial conditions. The results show that it is possible to achieve a uniform and slow pouring process even for heavy castings to preserve their internal quality.

Avian influenza prevalence among hunter-harvested birds in a remote Canadian First Nation community.

Science.gov (United States)

Liberda, Eric N; Meldrum, Richard; Charania, Nadia A; Davey, Robert; Tsuji, Leonard Js

2017-01-01

Avian influenza virus (AIV) prevalence has been associated with wild game and other bird species. The contamination of these birds may pose a greater risk to those who regularly hunt and consumed infected species. Due to resident concerns communicated by local Band Council, hunter-harvested birds from a remote First Nation community in subArctic Ontario, Canada were assessed for AIV. Hunters, and especially those who live a subsistence lifestyle, are at higher risk of AIV exposure due to their increased contact with wild birds, which represent an important part of their diet. Cloacal swabs from 304 harvested game birds representing several species of wild birds commonly hunted and consumed in this First Nation community were analyzed for AIV using real-time reverse transcription polymerase chain reaction. Subtyping was performed using reverse transcription polymerase chain reaction. Sequences were assembled using Lasergene, and the sequences were compared to Genbank. In total, 16 of the 304 cloacal swab samples were positive for AIV. Of the 16 positive samples, 12 were found in mallard ducks, 3 were found in snow geese (wavies), and 1 positive sample was found in partridge. The AIV samples were subtyped, when possible, and found to be positive for the low pathogenic avian influenza virus subtypes H3 and H4. No samples were positive for subtypes of human concern, namely H5 and H7. This work represents the first AIV monitoring program results of hunter-harvested birds in a remote subsistence First Nation community. Community-level surveillance of AIV in remote subsistence hunting communities may help to identify future risks, while educating those who may have the highest exposure about proper handling of hunted birds. Ultimately, only low pathogenic strains of AIV were found, but monitoring should be continued and expanded to safeguard those with the highest exposure risk to AIV.

Wear resistance of cast iron

Directory of Open Access Journals (Sweden)

S. Pietrowski

2008-10-01

Full Text Available In this paper investigations of abrasive and adhesive wear resistance of different cast iron grades have been presented. Examinations showed, that the most advantageous pair of materials is the cast iron – the hardened steel with low-tempered martensite. It was found, that martensitic nodular cast iron with carbides is the most resistant material.

National Metal Casting Research Institute final report. Volume 2, Die casting research

Energy Technology Data Exchange (ETDEWEB)

Jensen, D. [University of Northern Iowa, Cedar Falls, IA (United States). Dept. of Industrial Technology] [comp.

1994-06-01

Four subprojects were completed: development and evaluation of die coatings, accelerated die life characterization of die materials, evaluation of fluid flow and solidification modeling programs, selection and characterization of Al-based die casting alloys, and influence of die materials and coatings on die casting quality.

Sex differences in Nintendo Wii performance as expected from hunter-gatherer selection.

Science.gov (United States)

Cherney, Isabelle D; Poss, Jordan L

2008-06-01

To test the hunter-gatherer theory of cognitive sex differences, men and women each played four video games on a Wii console: two games simulating skills necessary for hunting (navigation and shooting) and two games simulating skills necessary for gathering (fine motor and visual search). Men outperformed women on the two hunting games, whereas there were no sex differences on the gathering skill games. The findings are discussed in terms of evolutionary psychology theory.

High frequency of lactose intolerance in a prehistoric hunter-gatherer population in northern Europe

Directory of Open Access Journals (Sweden)

Holmlund Gunilla

2010-03-01

Full Text Available Abstract Background Genes and culture are believed to interact, but it has been difficult to find direct evidence for the process. One candidate example that has been put forward is lactase persistence in adulthood, i.e. the ability to continue digesting the milk sugar lactose after childhood, facilitating the consumption of raw milk. This genetic trait is believed to have evolved within a short time period and to be related with the emergence of sedentary agriculture. Results Here we investigate the frequency of an allele (-13910*T associated with lactase persistence in a Neolithic Scandinavian population. From the 14 individuals originally examined, 10 yielded reliable results. We find that the T allele frequency was very low (5% in this Middle Neolithic hunter-gatherer population, and that the frequency is dramatically different from the extant Swedish population (74%. Conclusions We conclude that this difference in frequency could not have arisen by genetic drift and is either due to selection or, more likely, replacement of hunter-gatherer populations by sedentary agriculturalists.

Seasonal and Long-term Variations in 137Cs Among Adults from Swedish Hunter Families

International Nuclear Information System (INIS)

Agren, G.

2001-01-01

To study seasonal variations in 137 Cs, whole-body content measurements of adults from Swedish hunter families have been performed in autumn 1997 and spring 1998. Measurements were performed in three locations, By, Harbo and Gavle, geographically close (within 100 km of each other) but with large differences in ground deposition levels. The hunter families at these three locations were previously measured in 1994. The measured persons were also asked for their frequency of intake of moose, roe-deer, freshwater fish, mushrooms and berries. A statistically significant lower frequency of intake of mushrooms and berries in By, moose, roe-deer and mushrooms in Harbo, and moose in Gavle was found in springtime compared to autumn. In one of the locations, there was a statistically significant lower average 137 Cs whole-body content in spring 1998 than in autumn 1997 while in the other two locations no such effects could be seen. The 137 Cs whole-body content has decreased by 37% from 1994 and to 1998 (including physical decay) correlated to an effective ecological half time of 6 years. (author)

The evaluation of working casts prepared from digital impressions.

Science.gov (United States)

Hwang, Y C; Park, Y S; Kim, H K; Hong, Y S; Ahn, J S; Ryu, J J

2013-01-01

The aim of this study is to evaluate the reproducibility of working casts of a digital impression system by comparing them with the original, virtual, and rapid prototyping casts. A total of 54 cast sets in clinically stable occlusion were used. They were scanned by an iTero intraoral scanner and converted into STL format virtual casts. Rapid prototyping casts and polyurethane casts were fabricated from the iTero milling system based on the virtual casts. Several horizontal and vertical measurements were performed from the four types of casts, that is, original stone casts, virtual casts, rapid prototyping casts, and polyurethane casts of iTero. Measurement error, intraclass correlation coefficient (ICC), and differences among the casts were calculated and compared. Casts from iTero milling machines exhibited greater dimensional differences and lower ICC values than did other casts. In addition, many of the measurements of the iTero working casts showed statistically significant differences in comparison to the three other types of casts. In contrast, there were no statistically significant differences between the virtual and original casts. Virtual casts made by the iTero intraoral scanner exhibited excellent reproducibility. However, the casts from the iTero milling machine showed greater dimensional differences and lower reproducibility compared to other types of casts.

Temperature and microstructure characteristics of silumin casting AlSi9 made with investment casting method

Directory of Open Access Journals (Sweden)

S. Pietrowski

2011-07-01

Full Text Available This work presents the research result of the temperature distribution and the microstructure in certain parts of the field-glass body frame casting made from silumin AlSi9 using the investment casting method in the ceramic mould. It was proved that the highest temperature of the silumin appears in the sprue in which the silumin is in the liquid-solid state, though the process of silumin crystallization in the casting is finished. It was stated that in certain elements of the casting the side opposite to the runner crystallizes and cools fastest. The differences in the rate of crystalline growth and cooling of certain casting elements cause differ- ent microstructure in them which can also influence the mechanic properties.It is necessary to state that the temperature of the initial heating of the ceramic mold equal to 60oC guarantees obtaining of the castings without defects and of little porosity. Incomplete modification of the silumin with strontium causes silica precipitation to appear close to the spherical ones.

Segregation in cast products

Indian Academy of Sciences (India)

Unknown

The agreement with experimental data is mostly qualitative. The paper also ... For example, a high degree of positive segregation in the central region .... solute in a cast product, important ones being: size of casting, rate of solidification, mode.

The influence of the parameters of lost foam process on the quality of aluminum alloys castings

Directory of Open Access Journals (Sweden)

Aćimović-Pavlović Zagorka

2010-01-01

Full Text Available This paper presents the research results of application of Lost foam process for aluminum alloys castings of a simple geometry. The process characteristic is that patterns and gating of moulds, made of polymers, stay in the mould till the liquid metal inflow. In contact with the liquid metal, pattern intensely and in relatively short time decomposes and evaporates, which is accompanied by casting crystallization. As a consequence of polymer pattern decomposition and evaporation a great quantity of liquid and gaseous products are produced, which is often the cause of different types of casting errors. This paper presents the results of a research with a special consideration given to detecting and analyzing the errors of castings. In most cases the cause of these errors are defects of polymer materials used for evaporable patterns production, as well as defects of materials for refractory coatings production for polymer patterns. The researches have shown that different types of coatings determine properties of the obtained castings. Also, the critical processing parameters (polymer pattern density, casting temperature, permeability of refractory coating and sand, construction of patterns and gating of moulds significantly affect on castings quality. During the research a special consideration was given to control and optimization of these parameters with the goal of achieving applicable castings properties. The study of surface and internal error of castings was performed systematically in order to carry out preventive measures to avoid errors and minimize production costs. In order to achieve qualitative and profitable castings production by the method of Lost foam it is necessary to reach the balance in the system: evaporable polymer pattern - liquid metal - refractory coating - sandy cast in the phase of metal inflow, decomposition and evaporation of polymer pattern, formation and solidification of castings. By optimizing the processing

Genetic structure of Rajaka caste and affinities with other caste populations of Andhra Pradesh, India.

Science.gov (United States)

Parvatheesam, C; Babu, B V; Babu, M C

1997-01-01

The present study gives an account of the genetic structure in terms of distribution of a few genetic markers, viz., A1A2B0, Rh(D), G6PD deficiency and haemoglobin among the Rajaka caste population of Andhra Pradesh, India. The genetic relationships of the Rajaka caste with other Andhra caste populations were investigated in terms of genetic distance, i.e., Sq B (mn) of Balakrishnan and Sanghvi. Relatively lesser distance was established between the Rajaka and two Panchama castes. Also, the pattern of genetic distance corroborates the hierarchical order of the Hindu varna system.

Teaching Experientially with the Madeline Hunter Method: An Application in a Marketing Research Course

Science.gov (United States)

Burns, Alvin C.

2006-01-01

Due to concerns about the disparity of learning and the high nonresponse rates encountered by student marketing research teams working with sponsors, the author adopted the Hunter Method to restructure his course. This method requires the use of a model onto which students can map their learning via guided practice as well as independent practice.…

White cast iron with a nano-eutectic microstructure and high tensile strength and considerable ductility prepared by an aluminothermic reaction casting

International Nuclear Information System (INIS)

La, Peiqing; Wei, Fuan; Hu, Sulei; Li, Cuiling; Wei, Yupeng

2013-01-01

A white cast iron with nano-eutectic microstructure was prepared by an aluminothermic reaction casting. Microstructures of the cast iron were investigated by optical microscope (OM), electron probe micro-analyzer (EPMA), scanning electron microscope (SEM) and X-ray diffraction (XRD). Mechanical properties of the cast iron were tested. The results showed that the cast iron consisted of pearlite and cementite phases. Lamellar spacing of the pearlite phase was in a range of 110–275 nm and much smaller than that of the Ni-Hard 2 cast iron. Hardness of the cast iron was 552 Hv, tensile strength was 383 MPa, total elongation was 3% and compressive strength was 2224 MPa. Tensile strength and hardness of the cast iron was same to Ni-Hard 2 cast iron, besides the ductility was much better than that of the Ni-Hard 2 cast iron which is much expensive than the cast iron.

Method for casting thin metal objects

Science.gov (United States)

Pehrson, Brandon P; Moore, Alan F

2015-04-14

Provided herein are various embodiments of systems for casting thin metal plates and sheets. Typical embodiments include layers of mold cavities that are oriented vertically for casting the metal plates. In some embodiments, the mold cavities include a beveled edge such that the plates that are cast have a beveled edge. In some embodiments, the mold cavities are filled with a molten metal through an open horizontal edge of the cavity. In some embodiments, the mold cavities are filled through one or more vertical feed orifices. Further disclosed are methods for forming a thin cast metal plate or sheet where the thickness of the cast part is in a range from 0.005 inches to 0.2 inches, and the surface area of the cast part is in a range from 16 square inches to 144 square inches.

The Effect of Applied Pressure During Feeding of Critical Cast Aluminum Alloy Components With Particular Reference to Fatigue Resistance

Energy Technology Data Exchange (ETDEWEB)

J.T. Berry; R. Luck; B. Zhang; R.P. Taylor

2003-06-30

the medium to long freezing range alloys of aluminum such as A356, A357, A206, 319 for example are known to exhibit dispersed porosity, which is recognized as a factor affecting ductility, fracture toughness, and fatigue resistance of light alloy castings. The local thermal environment, for example, temperature gradient and freezing from velocity, affect the mode of solidification which, along with alloy composition, heat treatment, oxide film occlusion, hydrogen content, and the extent to which the alloy contracts on solidification, combine to exert strong effects on the porosity formation in such alloys. In addition to such factors, the availability of liquid metal and its ability to flow through the partially solidified casting, which will be affect by the pressure in the liquid metal, must also be considered. The supply of molten metal will thus be controlled by the volume of the riser available for feeding the particular casting location, its solidification time, and its location together with any external pressure that might be applied at the riser.

Cine Club

CERN Multimedia

Ciné Club

2011-01-01

Thursday 28 July 2011 at 20:30 CERN Council Chamber The Baader Meinhof Complex By/de : Uli Edel (Germany, 2008) 150 min With/avec: Martina Gedeck, Moritz Bleibtreu, Johanna Wokalek, Bruno Ganz   Germany in the 1970s: Murderous bomb attacks, the threat of terrorism and the fear of the enemy inside are rocking the very foundations of the yet fragile German democracy. The radicalised children of the Nazi generation lead by Andreas Baader, Ulrike Meinhof and Gudrun Ensslin are fighting a violent war against what they perceive as the new face of fascism: American imperialism supported by the German establishment, many of whom have a Nazi past. Their aim is to create a more human society but by employing inhuman means they not only spread terror and bloodshed, they also lose their own humanity. The man who understands them is also their hunter: the head of the German police force Horst Herold. And while he succeeds in his relentless pursuit of the young terrorists, he knows he'...

Modelling of flow phenomena during DC casting

NARCIS (Netherlands)

Zuidema, J.

2005-01-01

Modelling of Flow Phenomena during DC Casting Jan Zuidema The production of aluminium ingots, by semi-continuous casting, is a complex process. DC Casting stands for direct chill casting. During this process liquid aluminium transforms to solid aluminium while cooling down. This is not an

Mechanical properties of as-cast microalloyed steels produced via investment casting

International Nuclear Information System (INIS)

Najafi, H.; Rassizadehghani, J.; Norouzi, S.

2011-01-01

Tensile and room temperature Charpy V-notch impact tests were used to evaluate the variations in the as-cast mechanical properties of a low-carbon steel produced via shell mould investment casting and containing combinations of vanadium, niobium and titanium. Tensile results indicate that the yield strength and ultimate tensile strength (UTS) have increased up to respectively 615 MPa and 770 MPa due to the fine-scale microalloy precipitates in the microalloyed samples. Room temperature impact test results show that while addition of vanadium individually has not changed the impact energy, Nb has decreased it considerably. However, examination of fracture surfaces reveals that all microalloyed samples have failed by transgranular cleavage. Based on the transmission electron microscope (TEM) studies, it seems that carbonitrides being greater than 50 nm in size and formed along prior austenite grain boundaries before γ transformation are responsible for the observed reduction in impact energies and brittle fracture. In comparison to sand mould casting, the yield and UTS obtained from investment casting are superior. Furthermore, although the impact energies of Nb-containing alloys are approximately the same as those obtained from sand moulds, the impact energy of the alloy containing only vanadium has improved considerably.

Estimation of the tourism climate in the Hunter Region, Australia, in the early twenty-first century

Science.gov (United States)

Shiue, Ivy; Matzarakis, Andreas

2011-07-01

Existing tourism-related climate information and evaluation are typically based on mean monthly conditions of air temperature and precipitation and do not include thermal perception and other climate parameters relevant for tourists. Here, we quantify climate based on the climate facets relevant to tourism (thermal, physical, aesthetical), and apply the results to the Climate-Tourism-Information-Scheme (CTIS). This paper presents bioclimatic and tourism climatological conditions in the Hunter Region—one of Australia's most popular tourist destinations. In the Hunter Region, generally, temperatures below 15°C occur from April through October, temperatures less than 25°C are expected throughout the whole year, while humidity sits around 50%. As expected, large differences between air temperature and physiologically equivalent temperature (PET) were clearly identified. The widest differences were seen in summer time rather than in the winter period. In addition, cold stress was observed less than 10% of the time in winter while around 40-60% of heat stress was observed in summer time. This correlates with the highest numbers of international visitors, who usually seek a warmer weather, at the beginning of summer time (November and December) and also to the number of domestic visitors, who tend to seek cooler places for recreation and leisure, in late summer (January-March). It was concluded that thermal bioclimate assessment such as PET and CTIS can be applied in the Hunter region, and that local governments and the tourism industry should take an integrated approach to providing more relevant weather and climate information for both domestic and international tourists in the near future.

Spatial Bimetallic Castings Manufactured from Iron Alloys

Directory of Open Access Journals (Sweden)

M. Cholewa

2007-07-01

Full Text Available In this paper a conception for manufacturing method of skeleton castings with composite features was shown. Main application of such castings are the working organs of machines subjected to intensive abrasive and erosive wear. Skeleton geometry was based on three-dimensional cubic net consisting of circular connectors and nodes joining 6 connectors according to Cartesian co-ordinate system. Dimension of an elementary cell was equal to 10 mm and diameter of single connector was equal to 5 mm. For bimetallic castings preparation two Fe based alloys were used: L25SHMN cast steel for skeleton substrate and ZlCr15NiMo cast iron for working part of the casting. In presented work obtained structure was analyzed with indication of characteristic regions. Authors described phenomena occurring at the alloys interface and phases in transition zone. A thesis was formulated concerning localization of transition zone at the cast iron matrix – cast steel reinforcement interface. Direction of further studies were indicated.

Food Sharing among Hadza Hunter-Gatherer Children.

Directory of Open Access Journals (Sweden)

Alyssa N Crittenden

Full Text Available Human prosociality is one of the defining characteristics of our species, yet the ontogeny of altruistic behavior remains poorly understood. The evolution of widespread food sharing in humans helped shape cooperation, family formation, life history, language, and the development of economies of scale. While the behavioral and ecological correlates of food sharing among adults are widely studied, very little is known about food sharing among children. Here, in the first study to analyze the food sharing patterns of hunter-gatherer children, we show that while sharing may be biased towards kin, reciprocity characterizes the majority of all sharing dyads, both related and unrelated. These data lend support to the recent claim that discrimination among kin might be linked with reciprocal altruism theory. Furthermore, we show that age positively correlates with an increase in sharing, both in frequency and amount, supporting recent suggestions that prosocial behaviors and egalitarianism develop strongly in middle childhood when children acquire the normative rules of their society.

Food Sharing among Hadza Hunter-Gatherer Children.

Science.gov (United States)

Crittenden, Alyssa N; Zes, David A

2015-01-01

Human prosociality is one of the defining characteristics of our species, yet the ontogeny of altruistic behavior remains poorly understood. The evolution of widespread food sharing in humans helped shape cooperation, family formation, life history, language, and the development of economies of scale. While the behavioral and ecological correlates of food sharing among adults are widely studied, very little is known about food sharing among children. Here, in the first study to analyze the food sharing patterns of hunter-gatherer children, we show that while sharing may be biased towards kin, reciprocity characterizes the majority of all sharing dyads, both related and unrelated. These data lend support to the recent claim that discrimination among kin might be linked with reciprocal altruism theory. Furthermore, we show that age positively correlates with an increase in sharing, both in frequency and amount, supporting recent suggestions that prosocial behaviors and egalitarianism develop strongly in middle childhood when children acquire the normative rules of their society.

Modelling of Filling, Microstructure Formation, Local Mechanical Properties and Stress – Strain Development in High-Pressure Die Cast Aluminium Castings

DEFF Research Database (Denmark)

Kotas, Petr; Hattel, Jesper Henri; Thorborg, Jesper

2009-01-01

.e. whether the casting is based on cast iron- or aluminium-alloys. The distribution of local properties in a casting might vary substantially which makes it complex to optimize the casting with good accuracy. Often, mechanical simulations of the load situation are based on the assumption that the cast...... in an aluminium alloy is considered including simulation of the entire casting process with emphasis on microstructure formation related to mechanical properties such as elastic modulus, yield stress, ultimate strength and elongation as well as residual stresses. Subsequently, the casting is subjected to service...... loads and the results of this analysis are discussed in relation to the predicted local properties as well as the residual stresses originating from the casting simulation....

Coccidioidomycosis in armadillo hunters from the state of Ceará, Brazil.

Science.gov (United States)

Brillhante, Raimunda Sâmia Nogueira; Moreira Filho, Renato Evando; Rocha, Marcos Fábio Gadelha; Castelo-Branco, Débora de Souza Collares Maia; Fechine, Maria Auxiliadora Bezerra; Lima, Rita Amanda Chaves de; Picanço, Yuri Vieira Cunha; Cordeiro, Rossana de Aguiar; Camargo, Zoilo Pires de; Queiroz, José Ajax Nogueira; Araujo, Roberto Wagner Bezerra de; Mesquita, Jacó Ricarte Lima de; Sidrim, José Júlio Costa

2012-09-01

Coccidioidomycosis is a systemic mycosis with a variable clinical presentation. Misdiagnosis of coccidioidomycosis as bacterial pneumopathy leads to inappropriate prescription of antibiotics and delayed diagnosis. This report describes an outbreak among armadillo hunters in northeastern Brazil in which an initial diagnosis of bacterial pneumonia was later confirmed as coccidioidomycosis caused by Coccidioides posadasii. Thus, this mycosis should be considered as an alternative diagnosis in patients reporting symptoms of pneumonia, even if these symptoms are only presented for a short period, who are from areas considered endemic for this disease.

Coccidioidomycosis in armadillo hunters from the state of Ceará, Brazil

Directory of Open Access Journals (Sweden)

Raimunda Sâmia Nogueira Brillhante

2012-09-01

Full Text Available Coccidioidomycosis is a systemic mycosis with a variable clinical presentation. Misdiagnosis of coccidioidomycosis as bacterial pneumopathy leads to inappropriate prescription of antibiotics and delayed diagnosis. This report describes an outbreak among armadillo hunters in northeastern Brazil in which an initial diagnosis of bacterial pneumonia was later confirmed as coccidioidomycosis caused by Coccidioides posadasii. Thus, this mycosis should be considered as an alternative diagnosis in patients reporting symptoms of pneumonia, even if these symptoms are only presented for a short period, who are from areas considered endemic for this disease.

Beyond the drip-line: a high-resolution open-air Holocene hunter-gatherer sequence from highland Lesotho

CSIR Research Space (South Africa)

Mitchell, P

2011-03-01

Full Text Available the drip-line: a high-resolution open-air Holocene hunter-gatherer sequence from highland Lesotho Peter Mitchell1, Ina Plug2, Geoff Bailey3, Ruth Charles4, Amanda Esterhuysen5, Julia Lee Thorp6, Adrian Parker7 & Stephan Woodborne8 The activities...

Influence of heat treatment on microstructure and properties of bainitic cast steel used for frogs in railway crossovers

Directory of Open Access Journals (Sweden)

E. Tasak

2010-01-01

Full Text Available This work deals with influence of heat treatment on microstructure and properties of sample cast assigned as a material used for frogs in railway crossover. Materials used in railway industry for frogs (manganese cast steel and forged pearlitic steel do not fulfil strict conditions of exploitation of railway. One of the solutions is using cast steel with bainitic or bainite-martensite microstructure, what allows to gain high resistance properties (Rm = 1400 MPa, Rp0,2 = 900 MPa, hardness to 400 HBW. The cooling rates of rail type UIC60 shows that it is possible to reach the bainitic microstructure in cast of frog. The microstructure of lower banite should have an advantageous influence on cracking resistance. In order to set the parameters of heat treatment, the critical temperatures were determined by dilatometric methods determined. This heat treatment consisted of normalizing that prepared it to the farther process of resistance welding. Moreover, the CCT diagram of proposed bainitic cast steel was prepared. The exams were done that can be used to evaluate the influence of heat treatment on microstructure and properties of the sample cast.

Aging degradation of cast stainless steel: status and program

Energy Technology Data Exchange (ETDEWEB)

Chopra, O.K.; Ayrault, G.

1983-10-01

A program has been initiated to investigate the significance of in-service embrittlement of cast duplex stainless steels under light-water reactor operating conditions. The existing data are reviewed to determine the critical parameters that control the aging behavior and to define the objectives and scope of the investigation. The test matrices for microstructural studies and mechanical property measurements are presented. The initial experimental effort is focussed on characterizing the microstructure of long-term, low-temperature aged material. Specimens from three heats of cast CF-8 and CF-8M stainless steel aged for up to 70,000 h at 300, 350, and 400/sup 0/C were obtained from George Fisher Ltd., of Switzerland. Initial analyses reveal the formation of three different types of precipitates which are not ..cap alpha..'. An FCC phase, similar to the M/sub 23/C/sub 6/ precipitates, was present in all the long-term aged material. 15 references, 10 figures, 2 tables.

Aging degradation of cast stainless steel: status and program

International Nuclear Information System (INIS)

Chopra, O.K.; Ayrault, G.

1983-10-01

A program has been initiated to investigate the significance of in-service embrittlement of cast duplex stainless steels under light-water reactor operating conditions. The existing data are reviewed to determine the critical parameters that control the aging behavior and to define the objectives and scope of the investigation. The test matrices for microstructural studies and mechanical property measurements are presented. The initial experimental effort is focussed on characterizing the microstructure of long-term, low-temperature aged material. Specimens from three heats of cast CF-8 and CF-8M stainless steel aged for up to 70,000 h at 300, 350, and 400 0 C were obtained from George Fisher Ltd., of Switzerland. Initial analyses reveal the formation of three different types of precipitates which are not α'. An FCC phase, similar to the M 23 C 6 precipitates, was present in all the long-term aged material. 15 references, 10 figures, 2 tables

Surface evolution and carbon sequestration in disturbed and undisturbed wetland soils of the Hunter estuary, southeast Australia

Science.gov (United States)

Howe, A. J.; Rodríguez, J. F.; Saco, P. M.

2009-08-01

The aim of this work was to quantify the soil carbon storage and sequestration rates of undisturbed natural wetlands and disturbed wetlands subject to restriction of tidal flow and subsequent rehabilitation in an Australian estuary. Disturbed and undisturbed estuarine wetlands of the Hunter estuary, New South Wales, Australia were selected as the study sites for this research. Vertical accretion rates of estuarine substrates were combined with soil carbon concentrations and bulk densities to determine the carbon store and carbon sequestration rates of the substrates tested. Relationships between estuary water level, soil evolution and vertical accretion were also examined. The carbon sequestration rate of undisturbed wetlands was lower (15% for mangrove and 55% for saltmarsh) than disturbed wetlands, but the carbon store was higher (65% for mangrove and 60% for saltmarsh). The increased carbon sequestration rate of the disturbed wetlands was driven by substantially higher rates of vertical accretion (95% for mangrove and 345% for saltmarsh). Estuarine wetland carbon stores were estimated at 700-1000 Gg C for the Hunter estuary and 3900-5600 Gg C for New South Wales. Vertical accretion and carbon sequestration rates of estuarine wetlands in the Hunter are at the lower end of the range reported in the literature. The comparatively high carbon sequestration rates reported for the disturbed wetlands in this study indicate that wetland rehabilitation has positive benefits for regulation of atmospheric carbon concentrations, in addition to more broadly accepted ecosystem services.

Evaluation of porosity in Al alloy die castings

Directory of Open Access Journals (Sweden)

M. Říhová

2012-01-01

Full Text Available Mechanical properties of an Al-alloy die casting depend significantly on its structural properties. Porosity in Al-alloy castings is one of the most frequent causes of waste castings. Gas pores are responsible for impaired mechanical-technological properties of cast materials. On the basis of a complex evaluation of experiments conducted on AlSi9Cu3 alloy samples taken from the upper engine block which was die- cast with and without local squeeze casting it can be said that castings manufactured without squeeze casting exhibit maximum porosity in the longitudinal section. The area without local squeeze casting exhibits a certain reduction in mechanical properties and porosity increased to as much as 5%. However, this still meets the norms set by SKODA AUTO a.s.

Some Theoretical Considerations on Caste

Directory of Open Access Journals (Sweden)

Madhusudan Subedi

2014-05-01

Full Text Available Caste as a system of social stratification was an encompassing system in the past. There was reciprocal system of exchange goods and services. With time, occupation and mode of generation of livelihood of various caste groups changed, and the traditional form of jajmani system fizzled out. This paper provides an account of changing perspectives of caste relations in social science writing and political discourse. The discourse of caste has been shifted from ritual hierarchy and social discrimination to an instrument to mobilize people for economic and political gain. DOI: http://dx.doi.org/10.3126/dsaj.v7i0.10437 Dhaulagiri Journal of Sociology and Anthropology Vol. 7, 2013; 51-86

Fabrication of sacrificial anode cathodic protection through casting method

International Nuclear Information System (INIS)

Mohd Sharif Sattar; Muhamad Daud; Siti Radiah Mohd Kamarudin; Azali Muhamad; Zaiton Selamat; Rusni Rejab

2007-01-01

Aluminum is one of the few metals that can be cast by all of the processes used in casting metals. These processes consist of die casting, permanent mold casting, sand casting (green sand and dry sand), plaster casting, investment casting, and continuous casting. Other processes such as lost foam, squeeze casting, and hot isostatic pressing are also used. Permanent mold casting method was selected in which used for fabricating of sacrificial anode cathodic protection. This product was ground for surface finished and fabricated in the cylindrical form and reinforced with carbon steel at a center of the anode. (Author)

Investigation of scaling laws by critical neutron scattering from beta-brass

DEFF Research Database (Denmark)

Als-Nielsen, Jens Aage

1969-01-01

Using a Cu65-Zn β-brass crystal, the critical scattering of neutrons has been studied, both above and below T c. The staggered susceptibilities χ vary as C+(T/Tc-1)-γ and C-(1-T/Tc)-γ ', respectively. It is found that γ=γ' within an accuracy of 3%, in agreement with the scaling hypothesis of static...... critical phenomena; and that C+/C-=5.46±0.05, in excellent agreement with the recent parametric representation theory of Schofield and in fair agreement with the results of series expansions by Essam and Hunter. For fixed q, a flat maximum is observed in the wave-vector-dependent susceptibility χ(q, T...

Tradeoffs in the evolution of caste and body size in the hyperdiverse ant genus Pheidole.

Directory of Open Access Journals (Sweden)

Terrence P McGlynn

Full Text Available The efficient investment of resources is often the route to ecological success, and the adaptability of resource investment may play a critical role in promoting biodiversity. The ants of the "hyperdiverse" genus Pheidole produce two discrete sterile castes, soldiers and minor workers. Within Pheidole, there is tremendous interspecific variation in proportion of soldiers. The causes and correlates of caste ratio variation among species of Pheidole remain enigmatic. Here we test whether a body size threshold model accounts for interspecific variation in caste ratio in Pheidole, such that species with larger body sizes produce relatively fewer soldiers within their colonies. We evaluated the caste ratio of 26 species of Pheidole and found that the body size of workers accounts for interspecific variation in the production of soldiers as we predicted. Twelve species sampled from one forest in Costa Rica yielded the same relationship as found in previously published data from many localities. We conclude that production of soldiers in the most species-rich group of ants is regulated by a body size threshold mechanism, and that the great variation in body size and caste ratio in Pheidole plays a role in niche divergence in this rapidly evolving taxon.

14 CFR 29.621 - Casting factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Casting factors. 29.621 Section 29.621... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction General § 29.621 Casting factors. (a... approved specifications. Paragraphs (c) and (d) of this section apply to structural castings except...

An improved assay for iduronate 2-sulphate sulphatase in serum and its use in the detection of carriers of the Hunter syndrome

International Nuclear Information System (INIS)

Archer, I.M.; Harper, P.S.; Wusteman, F.S.

1981-01-01

A more sensitive assay procedure has been developed for the enzyme iduronate 2-sulphate sulphatase which is deficient in the Hunter syndrome. The substrate is O-(α-L-idopyranosyluronic acid 2-sulphate)-(1 → 4)-2,5 anhydro-D-[ 3 H-1)mannitol 6-sulphate, which, after incubation, is separated from the product by ion-exchange chromatography on a micro-columnn of Dowex 1 X 2 (Cl - ). Serum analyses can be used to supplement those on hair roots in the detection of carriers of the Hunter syndrome. (Auth.)

Cast erosion from the cleaning of debris after the use of a cast trimmer.

Science.gov (United States)

Hansen, Paul A; Beatty, Mark W

2017-02-01

Whether using tap water to rinse off debris will make a clinical difference to the surface detail of a gypsum cast is unknown. In addition, how best to remove debris from the cast is unknown. The purpose of this in vitro study was to evaluate the efficiency of different methods of cleaning a gypsum cast after trimming and the effect of short-term exposure to tap water on the surface quality of the cast. A die fitting American National Standards Institute/American Dental Association specification 25 (International Standards Organization specification 6873) for dental gypsum products was embedded in a Dentoform with the machined lines positioned at the same level as the occlusal surface of the posterior teeth. A flat plate was used to ensure that the plane of occlusion for the die was at the same position as the posterior teeth. Forty polyvinyl siloxane impressions of the Dentoform were made and poured with vacuum-mixed improved Type IV dental stone. Each cast was inspected for the accurate reproduction of the lines. The base of the 2-stage pour was trimmed with a cast trimmer with water, and surface debris was removed by rinsing by hand under tap water for 10 seconds, by brushing the cast with a soft toothbrush for 10 seconds, or by resoaking the cast and using a soft camel hair brush in slurry water for 10 seconds. The amount of debris was evaluated on a scale of 1 to 4, and the quality of the 20-μm line was evaluated on a scale of 1 to 4 under ×15 magnification. The nonparametric Kruskal-Wallis ranks test was used to identify significant differences among the different cleaning methods (α=.05). Results of the Kruskal-Wallis and Kruskal-Wallis Z-value tests demonstrated that all cleaning methods produced cleaner casts than were observed for uncleansed controls (P<.001), but no differences in debris removal were found among the different cleaning methods (.065≤P≤.901). The ability to see the quality of a 20-μm line (P=.974) was not statistically different

The temperature gradient on section of casting in process of primary crystallization of chromium cast iron

Directory of Open Access Journals (Sweden)

A. Studnicki

2008-08-01

Full Text Available The methodology of defining in article was introduced the temperature gradient in process of primary crystallization during cooling the casting from chromium cast iron on basis of measurements of thermal field in test DTA-K3. Insert also the preliminary results of investigations of influence temperature gradient on structure of studied wear resistance chromium cast iron.

Casting Footprints for Eternity

Science.gov (United States)

1999-01-01

Apollo 11 Astronaut Buzz Aldrin has his footprints casted during the dedication ceremony of the rocket fountain at Building 4200 at Marshall Space Flight Center. The casts of Aldrin's footprints will be placed in the newly constructed Von Braun courtyard representing the accomplishments of the Apollo 11 lunar landing.

"In pursuit of the Nazi mind?" The deployment of psychoanalysis in the Allied struggle against Germany.

Science.gov (United States)

Pick, Daniel

2009-01-01

This paper discusses how psychoanalytic ideas were brought to bear in the Allied struggle against the Third Reich and explores some of the claims that were made about this endeavour. It shows how a variety of studies of Fascist psychopathology, centered on the concept of superego, were mobilized in military intelligence, postwar planning and policy recommendations for "denazification." Freud's ideas were sometimes championed by particular army doctors and government planners; at other times they were combined with, or displaced by, competing, psychiatric and psychological forms of treatment and diverse studies of the Fascist "personality." This is illustrated through a discussion of the treatment and interpretation of the deputy leader of the Nazi Party, Rudolf Hess, after his arrival in Britain in 1941.

Casting fine grained, fully dense, strong inorganic materials

Science.gov (United States)

Brown, Sam W.; Spencer, Larry S.; Phillips, Michael R.

2015-11-24

Methods and apparatuses for casting inorganic materials are provided. The inorganic materials include metals, metal alloys, metal hydrides and other materials. Thermal control zones may be established to control the propagation of a freeze front through the casting. Agitation from a mechanical blade or ultrasonic energy may be used to reduce porosity and shrinkage in the casting. After solidification of the casting, the casting apparatus may be used to anneal the cast part.

14 CFR 25.621 - Casting factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Casting factors. 25.621 Section 25.621... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction General § 25.621 Casting factors. (a... meet approved specifications. Paragraphs (c) and (d) of this section apply to any structural castings...

14 CFR 27.621 - Casting factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Casting factors. 27.621 Section 27.621... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction General § 27.621 Casting factors. (a) General... approved specifications. Paragraphs (c) and (d) of this section apply to structural castings except...

The coexistence of Baird's tapir (Tapirus bairdii) and indigenous hunters in northeastern Honduras.

Science.gov (United States)

Dunn, Marc; Estrada, Nereyda; Smith, Derek A

2012-12-01

The Baird's tapir (Tapirus bairdii) is a popular game species throughout Central America, particularly among indigenous populations, and is currently endangered. Research on Miskitu hunting was conducted over 4 months in a remote region in northeastern Honduras that overlaps with the Río Plátano Biosphere Reserve. The hunting zone was mapped together with hunters and interviews were conducted with elders and other community members about tapir hunting. Results show that tapir harvesting is targeted toward specific habitats at specific times of year. Harvest rates for one year suggest that tapir hunting in the area exceeds estimates of maximum sustainable production. Nevertheless, field surveys reveal the presence of tapir within 1 km of the community, and its harvest tends to be nearby, in both forested and agricultural landscapes, suggesting that the animal has not been depleted in the area. It appears that the existence of forest areas adjacent to the hunting zone that do not experience hunting, together with the anthropogenic habitats created through shifting cultivation, are factors that help explain the presence of tapirs in the area. The article concludes with a discussion regarding the potential positive role of indigenous hunters in tapir conservation throughout its distribution range. © 2012 Wiley Publishing Asia Pty Ltd, ISZS and IOZ/CAS.

Abrasion Resistance of as-Cast High-Chromium Cast Iron

Directory of Open Access Journals (Sweden)

Pokusová Marcela

2014-12-01

Full Text Available High chromium cast irons are widely used as abrasion resistant materials. Their properties and wear resistance depend on carbides and on the nature of the matrix supporting these carbides. The paper presents test results of irons which contain (in wt.% 18-22 Cr and 2-5 C, and is alloyed by 1.7 Mo + 5 Ni + 2 Mn to improve the toughness. Tests showed as-cast irons with mostly austenitic matrix achieved hardness 36-53 HRC but their relative abrasion-resistance was higher than the tool steel STN 19436 heat treated on hardness 60 HRC.

Novel casting processes for single-crystal turbine blades of superalloys

Science.gov (United States)

Ma, Dexin

2018-03-01

This paper presents a brief review of the current casting techniques for single-crystal (SC) blades, as well as an analysis of the solidification process in complex turbine blades. A series of novel casting methods based on the Bridgman process were presented to illustrate the development in the production of SC blades from superalloys. The grain continuator and the heat conductor techniques were developed to remove geometry-related grain defects. In these techniques, the heat barrier that hinders lateral SC growth from the blade airfoil into the extremities of the platform is minimized. The parallel heating and cooling system was developed to achieve symmetric thermal conditions for SC solidification in blade clusters, thus considerably decreasing the negative shadow effect and its related defects in the current Bridgman process. The dipping and heaving technique, in which thinshell molds are utilized, was developed to enable the establishment of a high temperature gradient for SC growth and the freckle-free solidification of superalloy castings. Moreover, by applying the targeted cooling and heating technique, a novel concept for the three-dimensional and precise control of SC growth, a proper thermal arrangement may be dynamically established for the microscopic control of SC growth in the critical areas of large industrial gas turbine blades.

CASTING METHOD AND APPARATUS

Science.gov (United States)

Gray, C.F.; Thompson, R.H.

1958-10-01

An improved apparatus for the melting and casting of uranium is described. A vacuum chamber is positioned over the casting mold and connected thereto, and a rod to pierce the oxide skin of the molten uranium is fitted into the bottom of the melting chamber. The entire apparatus is surrounded by a jacket, and operations are conducted under a vacuum. The improvement in this apparatus lies in the fact that the top of the melting chamber is fitted with a plunger which allows squeezing of the oxide skin to force out any molten uranium remaining after the skin has been broken and the molten charge has been cast.

Pressure distribution in centrifugal dental casting.

Science.gov (United States)

Nielsen, J P

1978-02-01

Equations are developed for liquid metal pressure in centrifugal dental casting, given the instantaneous rotational velocity, density, and certain dimensions of the casting machine and casting pattern. A "reference parabola" is introduced making the fluid pressure concept more understandable. A specially designed specimen demonstrates experimentally the reference parabola at freezing.

1500-year Record of trans-Pacific Dust Flux collected from the Denali Ice Core, Mt. Hunter, Alaska

Science.gov (United States)

Saylor, P. L.; Osterberg, E. C.; Koffman, B. G.; Winski, D.; Ferris, D. G.; Kreutz, K. J.; Wake, C. P.; Handley, M.; Campbell, S. W.

2016-12-01

Mineral dust aerosols are a critical component of the climate system through their influence on atmospheric radiative forcing, ocean productivity, and surface albedo. Dust aerosols derived from Asian deserts are known to reach as far as Europe through efficient transport in the upper tropospheric westerlies. While centennially-to-millennially resolved Asian dust records exist over the late Holocene from North Pacific marine sediment cores and Asian loess deposits, a high-resolution (sub-annual to decadal) record of trans-Pacific dust flux will significantly improve our understanding of North Pacific dust-climate interactions and provide paleoclimatological context for 20th century dust activity. Here we present an annually resolved 1500-year record of trans-Pacific dust transport based on chemical and physical dust measurements in parallel Alaskan ice cores (208 m to bedrock) collected from the summit plateau of Mt. Hunter in Denali National Park. The cores were sampled at high resolution using a continuous melter system with discrete analyses for major ions (Dionex ion chromatograph), trace elements (Element2 inductively coupled plasma mass spectrometer), and stable water isotope ratios (Picarro laser ringdown spectroscopy), and continuous flow analysis for dust concentration and size distribution (Klotz Abakus). We compare the ice core dust record to instrumental aerosol stations, satellite observations, and dust model data from the instrumental period, and evaluate climatic controls on dust emission and trans-Pacific transport using climate reanalysis data, to inform dust-climate relationships over the past 1500 years. Physical particulate and chemical data demonstrate remarkable fidelity at sub-annual resolution, with both displaying a strong springtime peak consistent with periods of high dust activity over Asian desert source regions. Preliminary results suggest volumetric mode typically ranges from 4.5 - 6.5 um, with a mean value of 5.5 um. Preliminary

Ancient DNA reveals lack of continuity between neolithic hunter-gatherers and contemporary Scandinavians

DEFF Research Database (Denmark)

Malmström, Helena; Gilbert, M Thomas P; Thomas, Mark G

2009-01-01

of the two cultures in Scandinavia has been cited as an argument against population replacement between the Mesolithic and the present [7, 8]. Through analysis of DNA extracted from ancient Scandinavian human remains, we show that people of the Pitted Ware culture were not the direct ancestors of modern......]. Furthermore, our data are consistent with the view that the eastern Baltic represents a genetic refugia for some of the European hunter-gatherer populations....

Study on Compatibility between Converters and Casting Machines for Daily Steelmaking and Continuous Casting Scheduling

Institute of Scientific and Technical Information of China (English)

MA Feng-cai; ZHANG Qun

2009-01-01

In this paper, daily production scheduling is studied based on the Third Steelmaking Plant of Wuhan Iron and steel corporation (WISCO). To make sure the daily production plan is feasible, method of casting gToup is established, and the compatibility between two converters and three continuous casting devices in the Third Steelmaking Plant of WISCO is analyzed. The process flow chart of daily production scheduling is given in this paper. Then, algorithms and procedures for the simulation of daily production plan is developed. Using the actual data from the Third Steelmaking Plant, the feasible daily steelmaking plan and cast plan are given. The plan contains 7 groups of cast plan, figured out 54 converters, and a- bout 13,500 tons steel.

Ponseti casting: a new soft option.

Science.gov (United States)

Brewster, M B S; Gupta, M; Pattison, G T R; Dunn-van der Ploeg, I D

2008-11-01

We have modified the Ponseti casting technique by using a below-knee Softcast instead of an above-knee plaster of Paris cast. Treatment was initiated as soon as possible after birth and the Pirani score was recorded at each visit. Following the manipulation techniques of Ponseti, a below-knee Softcast was applied directly over a stockinette for a snug fit and particular attention was paid to creating a deep groove above the heel to prevent slippage. If necessary, a percutaneous Achilles tenotomy was performed and casting continued until the child was fitted with Denis Browne abduction boots. Between April 2003 and May 2007 we treated 51 consecutive babies with 80 idiopathic club feet with a mean age at presentation of 4.5 weeks (4 days to 62 weeks). The initial mean Pirani score was 5.5 (3 to 6). It took a mean of 8.5 weeks (4 to 53) of weekly manipulation and casting to reach the stage of percutaneous Achilles tenotomy. A total of 20 feet (25%) did not require a tenotomy and for the 60 that did, the mean Pirani score at time of operation was 2.5 (0.5 to 3). Denis Browne boots were applied at a mean of 10 weeks (4 to 56) after presentation. The mean time from tenotomy to boots was 3.3 weeks (2 to 10). We experienced one case of cast-slippage during a period of non-attendance, which prolonged the casting process. One case of prolonged casting required repeated tenotomy, and three feet required repeated tenotomy and casting after relapsing while in Denis Browne boots. We believe the use of a below-knee Softcast in conjunction with Ponseti manipulation techniques shows promising initial results which are comparable to those using above-knee plaster of Paris casts.

Big game hunting practices, meanings, motivations and constraints: a survey of Oregon big game hunters

Science.gov (United States)

Suresh K. Shrestha; Robert C. Burns

2012-01-01

We conducted a self-administered mail survey in September 2009 with randomly selected Oregon hunters who had purchased big game hunting licenses/tags for the 2008 hunting season. Survey questions explored hunting practices, the meanings of and motivations for big game hunting, the constraints to big game hunting participation, and the effects of age, years of hunting...

Improved Casting Furnace Conceptual Design

Energy Technology Data Exchange (ETDEWEB)

Fielding, Randall Sidney [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tolman, David Donald [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-02-01

In an attempt to ensure more consistent casting results and remove some schedule variance associated with casting, an improved casting furnace concept has been developed. The improved furnace uses the existing arc melter hardware and glovebox utilities. The furnace concept was designed around physical and operational requirements such as; a charge sized of less than 30 grams, high heating rates and minimal additional footprint. The conceptual model is shown in the report as well as a summary of how the requirements were met.

Numerical microstructure prediction for an aluminium casting and its experimental validation

OpenAIRE

Unterreiter Guenter; Ludwig Andreas; Wu Menghuai

2011-01-01

Virtual manufacturing based on through-process modelling becomes an evolving research area which aims at integrating diverse simulation tools to realize computer-aided design, analysis, prototyping and manufacturing. Numerical prediction of the as-cast microstructure is an initial and critical step in the whole through-process modelling chain for engineering components. A commercial software package with the capability of calculating important microstructure features for aluminium alloys is u...

Using obsidian transfer distances to explore social network maintenance in late Pleistocene hunter-gatherers.

Science.gov (United States)

Pearce, Eiluned; Moutsiou, Theodora

2014-12-01

Social behaviour is notoriously difficult to study archaeologically and it is unclear how large the networks of prehistoric humans were, or how they remained connected. Maintaining social cohesion was crucial for early humans because social networks facilitate cooperation and are imperative for survival and reproduction. Recent hunter-gatherer social organisation typically comprises a number of nested layers, ranging from the nuclear family through to the ~1500-strong ethnolinguistic tribe. Here we compare maximum obsidian transfer distances from the late Pleistocene with ethnographic data on the size of the geographic areas associated with each of these social grouping layers in recent hunter-gatherers. The closest match between the two is taken to indicate the maximum social layer within which contact could be sustained by Pleistocene hominins. Within both the (sub)tropical African and Subarctic biomes, the maximum obsidian transfer distances for Pleistocene modern humans (~200km and ~400km respectively) correspond to the geographic ranges of the outermost tribal layer in recent hunter-gatherers. This suggests that modern humans could potentially sustain the cohesion of their entire tribe at all latitudes, even though networks are more dispersed nearer the poles. Neanderthal obsidian transfer distances (300km) indicate that although Neanderthal home ranges are larger than those of low latitude hominins, Neanderthals travelled shorter distances than modern humans living at the same high latitudes. We argue that, like modern humans, Neanderthals could have maintained tribal cohesion, but that their tribes were substantially smaller than those of contemporary modern humans living in similar environments. The greater time taken to traverse the larger modern human tribal ranges may have limited the frequency of their face-to-face interactions and thus necessitated additional mechanisms to ensure network connectivity, such as the exchange of symbolic artefacts

Casting defects and mechanical properties of high pressure die cast Mg-Zn-Al-RE alloys

Energy Technology Data Exchange (ETDEWEB)

Xiao, Wenlong; Easton, Mark A.; Zhu, Suming; Nie, Jianfeng [CAST Cooperative Research Centre, Department of Materials Engineering Monash University, Melbourne, VIC (Australia); Dargusch, Matthew S. [School of Mechanical and Mining Engineering, University of Queensland, Brisbane, QLD (Australia); Gibson, Mark A. [CSIRO Process Science and Engineering, Melbourne, VIC (Australia); Jia, Shusheng [Key Laboratory of Automobile Materials, Ministry of Education, Department of Materials Science and Engineering Jilin University, Changchun (China)

2012-02-15

The die casting defects and tensile properties of high pressure die cast (HPDC) Mg-Zn-Al-RE alloys with various combinations of Zn and Al were studied. The results show that die casting defects in Mg-Zn-Al-RE alloys are affected by the percentage of Zn and Al contents. The hot tearing susceptibility (HTS) of Mg-Zn-Al-RE alloys tends to increase with increasing Zn content up to 6 wt%, while a further increase of Al and/or Zn content reduces the HTS. In tensile tests, the yield strength (YS) is generally improved by increasing Zn or Al content, whereas the tensile strength (TS) and ductility appear to depend largely on the presence of casting defects. Compared with Mg-Zn-Al alloys, the mechanical properties of the Mg-Zn-Al-RE alloy are significantly improved. The Mg-4Zn-4Al-4RE alloy is found to have few casting defects and the optimal tensile properties. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Low Loss Advanced Metallic Fuel Casting Evaluation

International Nuclear Information System (INIS)

Kim, Kihwan; Ko, Youngmo; Kim, Jonghwan; Song, Hoon; Lee Chanbock

2014-01-01

The fabrication process for SFR fuel is composed of fuel slug casting, loading and fabrication of the fuel rods, and the fabrication of the final fuel assemblies. Fuel slug casting is the dominant source of fuel losses and recycles streams in the fabrication process. Recycle streams include fuel slug reworks, returned scraps, and fuel casting heels, which are a special concern in the counter gravity injection casting process because of the large masses involved. Large recycle and waste streams result in lowering the productivity and the economic efficiency of fuel production. To increase efficiency the fuel losses in the furnace chamber, crucible, and the mold, after casting a considerable amount of fuel alloy in the casting furnace, will be quantitatively evaluated. After evaluation the losses will be identified and minimized. It is expected that this study will contribute to the minimization of fuel losses and the wastes streams in the fabrication process of the fuel slugs. Also through this study the technical readiness level of the metallic fuel fabrication process will be further enhanced. In this study, U-Zr alloy system fuel slugs were fabricated by a gravity casting method. Metallic fuel slugs were successfully fabricated with 19 slugs/batch with diameter of 5mm and length of 300mm. Fuel losses was quantitatively evaluated in casting process for the fuel slugs. Fuel losses of the fuel slugs were so low, 0.1∼1.0%. Injection casting experiments have been performed to reduce the fuel loss and improve the casting method. U-Zr fuel slug having φ5.4-L250mm was soundly fabricated with 0.1% in fuel loss. The fuel losses could be minimized to 0.1%, which showed that casting technology of fuel slugs can be a feasible approach to reach the goal of the fuel losses of 0.1% or less in commercial scale

MRI findings in the mild type of mucopolysaccharidosis II (Hunter's syndrome)

International Nuclear Information System (INIS)

Shimoda-Matsubayashi, S.; Ito, T.; Hattori, N.; Okuma, Y.; Mizuno, Y.; Kuru, Y.; Sumie, H.

1990-01-01

Neuroradiological findings in a 44-year-old male with the typical mild type of Hunter's disease are reported. Cranial MRI revealed patchy areas of increased and decreased signals in T1- and T2-weighted images in the thalamus and the basal ganglia giving rise to a honey comb-like appearance as a whole. The deep white matter showed high signals in the T2-weighted image. To our knowledge, the honey comb-like appearance has never been reported in this disorder. Deposition of mucopolysaccharides and/or glycolipids and increase in fluid content seem to be responsible for these changes. (orig.)

The effect of cast-to-cast variations on the quality of thin section nickel alloy welded joints

International Nuclear Information System (INIS)

Lambert, J.A.

1989-02-01

The welding behaviour of 26 commercial casts of Alloy 800 has been quantified for mechanised, autogenous, full penetration, bead-on-strip tungsten inert gas welding tests. Weld front and back widths have been measured and correlated with minor element variations. Casts with similar welding responses have been sorted into groups. The behaviour of the weld pool, surface slags and arc have been compared and a convection controlled model has been used to account for differences between the groups of casts. The main factors governing laboratory process control variability have been identified and a statistical method has been used to identify all the components of weld variance. An optimum size of welding test matrix has been proposed to determine typical cast-to-cast variations at high significance levels. (author)

The formation of fire residues associated with hunter-gatherers in humid tropical environments: A geo-ethnoarchaeological perspective

Science.gov (United States)

Friesem, David E.; Lavi, Noa; Madella, Marco; Boaretto, Elisabetta; Ajithparsad, P.; French, Charles

2017-09-01

Tropical forests have been an important human habitat and played a significant role in early human dispersal and evolution. Likewise, the use of fire, besides being one of the exceptional characteristics of humans, serves as a marker for human evolution. While the use of fire by prehistoric hunter-gatherers is relatively well documented in arid and temperate environments, the archaeological evidence in humid tropical environment is to date very limited. We first review the archaeological evidence for hunter-gatherer use of fire in humid tropical environments and suggest that better understanding of formation processes is required. We present a geo-ethnoarchaeological study from South India, involving ethnography, excavations and laboratory-based analyses in order to build a new framework to study fire residues in humid tropical forests associated with hunter-gatherer's use of fire. Ethnographic observations point to a dynamic and ephemeral use of hearths. Hearths location were dictated by the social and ever-changing social dynamics of the site. The hearths deposited small amount of residues which were later swept on a daily basis, re-depositing ash and charcoal in waste areas and leaving only a microscopic signal in the original location. Particular acidic conditions and intensive biological activity within tropical sediments result in the complete dissolution of ash and bones while favouring the preservation of charcoal and phytoliths. Consequently, the identification of fire residues in humid tropical forests and the reconstruction of the human use of fire must involve multi-proxy microscopic analysis to detect its micro-signatures.

Influence of microscopic casting defects on fatigue endurance of ductile cast iron

Directory of Open Access Journals (Sweden)

Nový František

2018-01-01

Full Text Available In this work, there are published results about fatigue endurance of ductile cast iron obtained at high-frequency sinusoidal cyclic push-pull loading in the ultra-high cycle fatigue region. The main attention was focused on the fatigue lifetime data scatter caused by the influence of microscopic casting defects (microshrinkages, microbubbles, microcracks, non-metallic inclusions and local clusters of big graphitic nodules.

Caste in Itself, Caste and Class, or Caste in Class

OpenAIRE

Ramkrishna Mukherjee

2015-01-01

After the British conquered Bengal and eventually the whole of India,they set out to administer the colony. In this context they encountered two phenomena with which they were not familiar: (1) the relation of people to land for production (and not for revenue receiving, household living, etc.), and (2) the caste system of India, viz. the jati strati?cation of society.

Effect of parameters of high-pressure die casting on occurrence of casting nonconformities in sleeves of silumin alloy EN AB 47100

Directory of Open Access Journals (Sweden)

Pałyga Ł.

2017-03-01

Full Text Available The paper presents a research on the effect of extreme - for the technology of the considered silumin EN AB 47100 - parameters of high-pressure die casting on occurrence of casting nonconformities. Considered was influence of the way of assembling the mould cooled-down to 140-160°C, non-standard for the selected casting, and pouring temperature in the range of 705 to 720°C (higher than the recommended of non-refined alloy. The castings were prepared with use of a high-pressure casting machine made by Kirov with mould closing force of 2500 kN. Occurrence of nonconformities was evaluated on properly prepared specimens taken from the castings manufactured with various parameters of the injection piston and various multiplication pressures. The results were subjected to quantitative and qualitative analyses of casting nonconformities and distribution of major alloying elements. It was found that proper selection of working parameters of the casting machine, in spite of disadvantageous pouring conditions, makes it possible to reduce occurrence of some casting defects, like shrinkage cavities and porosity, to improve tightness of castings even when the alloy refining process is omitted.

Developing technological process of obtaining giality casts

Directory of Open Access Journals (Sweden)

A. Issagulov

2014-10-01

Full Text Available The article considers the process of manufacturing castings using sand-resin forms and alloying furnace. Were the optimal technological parameters of manufacturing shell molds for the manufacture of castings of heating equipment. Using the same upon receipt of castings by casting in shell molds furnace alloying and deoxidation of the metal will provide consumers with quality products and have a positive impact on the economy in general engineering.

Simulation of the injection casting of metallic fuels

International Nuclear Information System (INIS)

Nakagawa, Tomokazu; Ogata, Takanari; Tokiwai, Moriyasu.

1989-01-01

For the fabrication of metallic fuel pins, injection casting is a preferable process because the simplicity of the process is suitable for remote operation. In this process, the molten metal in the crucible is injected into evacuated molds (suspended above the crucible) by pressurizing the casting furnace. Argonne National Laboratory has already adopted this process in the Integral Fast Reactor program. To obtain fuel pins with good quality, the casting parameters, such as the molten metal temperature, the magnitude of the pressure applied, the pressurizing rate, the cooling time, etc., must be optimized. Otherwise, bad-quality castings (short castings, rough surfaces, shrinkage cavities, mold fracture) may result. Therefore, it is very important in designing the casting equipment and optimizing the operation conditions to be able to predict the fluid and thermal behavior of the castings. This paper describes methods to simulate the heat and mass transfer in the molds and molten metallic fuel during injection casting. The results obtained by simulation are compared with experimental ones. Also, appropriate casting conditions for the uranium-plutonium-zirconium alloy are discussed based on the simulated results

Development of vacuum continuous casting technology for uranium

International Nuclear Information System (INIS)

Lee, Y.S.; Kim, C. K.; Kim, K. H.; Lee, D. B.; Kim, J. D.; Jang, S. J.; Ahn, H. S.; Shin, Y. J.

2001-02-01

The spent fuel disposal process of new dry storage concept has been developed in KAERI, in which the uranium metal abstracted by Li-reduction of spent fuel will be formed to long rods and then the rods will be arranged uniformly in canister. The objective of this study is to review the feasibility of applying the continuous casting method to cast a long rod with modifying the vacuum high-frequency induction furnace to vacuum continuous casting system, which was normally used to cast the uranium. The results are as follows. With the nozzle size of 3mm and the withdrawal speed of 3.5 mm/sec, the length of 160mm, diameter of 30 mm continuous casting uranium bar was successfully cast. This result shows there might be a possibility of continuous casting of uranium and helps the design and fabrication of new continuous casting equipment

How Do Hunter-Gatherer Children Learn Subsistence Skills? : A Meta-Ethnographic Review.

Science.gov (United States)

Lew-Levy, Sheina; Reckin, Rachel; Lavi, Noa; Cristóbal-Azkarate, Jurgi; Ellis-Davies, Kate

2017-12-01

Hunting and gathering is, evolutionarily, the defining subsistence strategy of our species. Studying how children learn foraging skills can, therefore, provide us with key data to test theories about the evolution of human life history, cognition, and social behavior. Modern foragers, with their vast cultural and environmental diversity, have mostly been studied individually. However, cross-cultural studies allow us to extrapolate forager-wide trends in how, when, and from whom hunter-gatherer children learn their subsistence skills. We perform a meta-ethnography, which allows us to systematically extract, summarize, and compare both quantitative and qualitative literature. We found 58 publications focusing on learning subsistence skills. Learning begins early in infancy, when parents take children on foraging expeditions and give them toy versions of tools. In early and middle childhood, children transition into the multi-age playgroup, where they learn skills through play, observation, and participation. By the end of middle childhood, most children are proficient food collectors. However, it is not until adolescence that adults (not necessarily parents) begin directly teaching children complex skills such as hunting and complex tool manufacture. Adolescents seek to learn innovations from adults, but they themselves do not innovate. These findings support predictive models that find social learning should occur before individual learning. Furthermore, these results show that teaching does indeed exist in hunter-gatherer societies. And, finally, though children are competent foragers by late childhood, learning to extract more complex resources, such as hunting large game, takes a lifetime.

Hepatitis E virus antibody prevalence in hunters from a district in Central Germany, 2013: a cross-sectional study providing evidence for the benefit of protective gloves during disembowelling of wild boars.

Science.gov (United States)

Schielke, A; Ibrahim, V; Czogiel, I; Faber, M; Schrader, C; Dremsek, P; Ulrich, R G; Johne, R

2015-10-22

In Germany, 17% of the general human population have antibodies to hepatitis E virus (HEV) (recomLine HEV-IgG/IgM immunoassay [Mikrogen GmbH]). Wild boars represent an animal reservoir for HEV genotype 3, which is the common genotype in Germany. We estimated the seroprevalence among hunters with contact to wild boars to identify factors that may be associated with past or present HEV infection. In 2013, the local veterinarian authority in a district in Central Germany attended meetings of hunters who provided blood specimens and completed a questionnaire collecting information on age, sex, hunting-related activities and consumption of wild boar meat. Specimens of wild boars were taken during drive hunts in this district during the season 2012/2013. All specimens were tested for HEV RNA and anti-HEV IgM and IgG antibodies. Log-binomial regression was used to estimate prevalence ratios (PR) for the hunters. Of 126 hunters (median age 55; 94% male) 21% tested positive for anti-HEV IgG antibodies (95% confidence interval [CI] 13-28%) (recomWell HEV IgG assay [Mikrogen GmbH]). Anti-HEV prevalence was highest in the age group of the 70-79-year-olds (67%; 95% CI 39-95%). Wild boars showed an average anti-HEV prevalence of 41%. HEV RNA was detected in 4/22 (18%) liver specimens and in 1/22 (4.5%) muscle specimens. Most wild boars were tested positive for HEV RNA (3/10; 30%) and HEV-specific antibodies (7/15; 47%) in the southwestern part of the district. Hunters preferring this hunting ground had a lower anti-HEV prevalence when gloves were frequently used during disembowelling of wild boars compared to hunters using gloves never or infrequently (age-adjusted PR 0.12; 95% CI 0.02-0.86). Hunters may benefit from wearing gloves when in contact with blood or body fluids of HEV animal reservoirs. Anti-HEV prevalence among the hunters of this study did not significantly differ from that of the general population suggesting that other factors play a major role in the

The effects of casting speed on steel continuous casting process

Energy Technology Data Exchange (ETDEWEB)

Sadat, Mohammad; Honarvar Gheysari, Ali; Sadat, Saeid [Islamic Azad University, Department of Mechanics, Mashhad Branch, Mashhad (Iran, Islamic Republic of)

2011-12-15

A three dimensional simulation of molten steel flow, heat transfer and solidification in mold and ''secondary cooling zone'' of Continuous Casting machine was performed with consideration of standard k-{epsilon} model. For this purpose, computational fluid dynamics software, FLUENT was utilized. From the simulation standpoint, the main distinction between this work and preceding ones is that, the phase change process (solidification) and flow (turbulent in mold section and laminar in secondary cooling zone) have been coupled and solved jointly instead of dividing it into ''transient heat conduction'' and ''steady fluid flow'' that can lead to more realistic simulation. Determining the appropriate boundary conditions in secondary cooling zone is very complicated because of various forms of heat transfer involved, including natural and forced convection and simultaneous radiation heat transfer. The main objective of this work is to have better understanding of heat transfer and solidification in the continuous casting process. Also, effects of casting speed on heat flux and shell thickness and role of radiation in total heat transfer is discussed. (orig.)

Optimization of squeeze casting parameters for non symmetrical AC2A aluminium alloy castings through Taguchi method

International Nuclear Information System (INIS)

Senthil, P.; Amirthagadeswaran, K. S.

2012-01-01

This paper reports a research in which an attempt was made to prepare AC2A aluminium alloy castings of a non symmetrical component through squeeze casting process. The primary objective was to investigate the influence of process parameters on mechanical properties of the castings. Experiments were conducted based on orthogonal array suggested in Taguchi's offline quality control concept. The experimental results showed that squeeze pressure, die preheating temperature and compression holding time were the parameters making significant improvement in mechanical properties. The optimal squeeze casting condition was found and mathematical models were also developed for the process

Long term stability analysis of cast iron shaft linings after Coal Mine closure and flooding

Energy Technology Data Exchange (ETDEWEB)

Hadj-Hassen, F. [Ecole des Mines de Paris - CGES, 77 - Fontainebleau (France); Bienvenu, Y. [Ecole des Mines de Paris, CM, 91 - Evry (France); Noirel, J.F. [Charbonnages de France, DTN, 57 - Freyming Merlebach (France); Metz, M. [charbonnages de France, ESA, 57 - Freyming Merlebach (France)

2005-07-01

This paper presents the results of a study conducted to analyse the long term stability of the cast iron shaft lining after coal mine closure and flooding. The attention is mainly focused on the behaviour during the critical phase of flooding as well as the phase corresponding to the disappearance of the water pressure and the stabilization of the environment. This pluri-disciplinary study was conducted by a team combining specialists in rock mechanics who identified the main risks and the conditions of stability of the lining and specialists in metallurgy who studied the composition of the cast iron and its corrosion behaviour after exposure to mine water. (authors)

Long term stability analysis of cast iron shaft linings after Coal Mine closure and flooding

International Nuclear Information System (INIS)

Hadj-Hassen, F.; Bienvenu, Y.; Noirel, J.F.; Metz, M.

2005-01-01

This paper presents the results of a study conducted to analyse the long term stability of the cast iron shaft lining after coal mine closure and flooding. The attention is mainly focused on the behaviour during the critical phase of flooding as well as the phase corresponding to the disappearance of the water pressure and the stabilization of the environment. This pluri-disciplinary study was conducted by a team combining specialists in rock mechanics who identified the main risks and the conditions of stability of the lining and specialists in metallurgy who studied the composition of the cast iron and its corrosion behaviour after exposure to mine water. (authors)

Tape casting fluorinated YBC123

International Nuclear Information System (INIS)

Taylor, J.A.T.; Luke, D.M.; Whiteley, B.A.

1991-01-01

Tape casting the superconducting Ba-Y-Cu oxide was accomplished by several laboratories and show promise for being a versatile forming technique. The major problem is low current density, probably due to lack of grain alignment and grain boundary related weak links. The latter problem may be due to formation of carbonates and hydroxides during binder burnout. Preliminary work done at Alfred shows that a bimodal powder size distribution displays significant alignment after tape casting and that F treated powder is resistant to attack by steam at 100C. Such corrosion resistant powder cast as form tape should survive the binder burnout without the detrimental grain boundary phases that develop from reaction of the superconducting phase, steam and carbon dioxide. This paper presents the results of an investigation of tape casting fluorinated powder with a bimodal size distribution

Seal welded cast iron nuclear waste container

International Nuclear Information System (INIS)

Filippi, A.M.; Sprecace, R.P.

1987-01-01

An article of manufacture is described comprising a cast iron container having an opening at one end and a cast iron plug; a first nickel-carbon alloy fusion weldable insert surrounding the opening and metallurgically bonded to the cast iron container at the one end of the container; a second nickel-carbon alloy insert metallurgically bonded to the cast iron plug located within the opening and surrounded by the first insert the inserts being jointed by a fusion bond in the opening without heating the cast iron container to an austenite formation temperature thereby sealing the interior of the container from the exterior ambient outside the opening; the nickel-carbon alloy containing about 2 to 5 w% carbon; and both the nickel-carbon alloy insert and the cast iron container have a microstructure containing a graphite phase

Centrifugal Casting Features/Metallurgical Characterization of Aluminum Alloys

International Nuclear Information System (INIS)

Chirita, G.; Soares, D.; Cruz, D.; Silva, F. S.; Stefanescu, I.

2008-01-01

This paper deals with the study of centrifugal effects on aluminium castings under high G values. Most of the studies in this domain (FGMs obtained by centrifugal casting) deal with functionally graded composites reinforced with a solid phase such as silicon particles or others. However, in this study it will be shown that unreinforced aluminium alloys may be significantly influenced by the centrifugal effect and that functionally graded castings are also obtained. It has been observed that the centrifugal effect may increase in some alloys, depending on the relative position in the castings, the rupture strength by approx. 50%, and rupture strain by about 300%, as compared to the gravity casting technique. The Young's modulus may also increase by about 20%. It has also been reported that in vertical centrifugal castings there are mainly three aspects that affect the components thus obtained, namely: fluid dynamics; vibration (inherent to the system); and centrifugal force. These features have a different effect on the castings depending on the aluminium alloy. In this paper, an analysis of the most important effects of the centrifugal casting process on metallurgical features is conducted. A solidification characterization at several points along the mould will be made in order to have an accurate idea of both the fluid dynamics inside the mould during the casting and the solidification behavior in different parts of the component. These two analyses will be related to the metallurgical properties (phase distribution; SDAS; eutectic silicon content and shape, pores density and shape) along the component and mainly along the direction of the centrifugal pressure. A comparison between castings obtained by both centrifugal casting technique and gravity casting technique is made for reference (gravity casting)

The fate of Hungarian Jewish dermatologists during the Holocaust: Part 2: Under Nazi rule.

Science.gov (United States)

Bock, Julia; Burgdorf, Walter H C; Hoenig, Leonard J; Parish, Lawrence Charles

At least 564,500 Hungarian Jews perished during the Holocaust, including many physicians. Exactly how many Jewish dermatologists were killed is not known. We have identified 62 Hungarian Jewish dermatologists from this period: 19 of these dermatologists died in concentration camps or were shot in Hungary, 3 committed suicide, and 1 died shortly after the Holocaust, exhausted by the War. Fortunately, many Hungarian Jewish dermatologists survived the Holocaust. Some had fled Europe before the Nazi takeover, as was described in Part 1 of this contribution. Two Holocaust survivors, Ferenc Földvári and Ödön Rajka, became presidents of the Hungarian Dermatologic Society and helped rebuild the profession of dermatology in Hungary after the War. This contribution provides one of the first accounts of the fate of Hungarian Jewish dermatologists during the Holocaust and serves as a remembrance of their suffering and ordeal. Copyright © 2016. Published by Elsevier Inc.

Novel technologies for the lost foam casting process

Science.gov (United States)

Jiang, Wenming; Fan, Zitian

2018-03-01

Lost foam casting (LFC) is a green precision casting process categorized as a near net forming technology. Yet, despite its popularity, it still suffers from some technological problems, such as poor filling ability of the castings, coarse and non-dense microstructure, low mechanical properties for the Al and Mg LFC processes, and defective carburization for the low carbon steel LFC process. These drawbacks restrict the development and widespread application of the LFC process. To solve these problems, the present study developed several novel LFC technologies, namely, LFC technologies under vacuum and low pressure, vibration solidification, and pressure solidification conditions; expendable shell casting technology; and preparation technology of bimetallic castings based on the LFC process. The results showed that the LFC under vacuum and low pressure evidently improved the filling ability and solved the oxidization problem of the alloys, which is suitable for producing complex and thinwall castings. The vibration and pressure solidifications increased the compactness of the castings and refined the microstructure, significantly improving the mechanical properties of the castings. The expendable shell casting technology could solve the pore, carburization, and inclusion defects of the traditional LFC method, obtaining castings with acceptable surface quality. Moreover, the Al/Mg and Al/Al bimetallic castings with acceptable metallurgical bonding were successfully fabricated using the LFC process. These proposed novel LFC technologies can solve the current technological issues and promote the technological progress of the LFC process.

Cardiovascular cast model fabrication and casting effectiveness evaluation in fetus with severe congenital heart disease or normal heart.

Science.gov (United States)

Wang, Yu; Cao, Hai-yan; Xie, Ming-xing; He, Lin; Han, Wei; Hong, Liu; Peng, Yuan; Hu, Yun-fei; Song, Ben-cai; Wang, Jing; Wang, Bin; Deng, Cheng

2016-04-01

To investigate the application and effectiveness of vascular corrosion technique in preparing fetal cardiovascular cast models, 10 normal fetal heart specimens with other congenital disease (control group) and 18 specimens with severe congenital heart disease (case group) from induced abortions were enrolled in this study from March 2013 to June 2015 in our hospital. Cast models were prepared by injecting casting material into vascular lumen to demonstrate real geometries of fetal cardiovascular system. Casting effectiveness was analyzed in terms of local anatomic structures and different anatomical levels (including overall level, atrioventricular and great vascular system, left-sided and right-sided heart), as well as different trimesters of pregnancy. In our study, all specimens were successfully casted. Casting effectiveness analysis of local anatomic structures showed a mean score from 1.90±1.45 to 3.60±0.52, without significant differences between case and control groups in most local anatomic structures except left ventricle, which had a higher score in control group (P=0.027). Inter-group comparison of casting effectiveness in different anatomical levels showed no significant differences between the two groups. Intra-group comparison also revealed undifferentiated casting effectiveness between atrioventricular and great vascular system, or left-sided and right-sided heart in corresponding group. Third-trimester group had a significantly higher perfusion score in great vascular system than second-trimester group (P=0.046), while the other anatomical levels displayed no such difference. Vascular corrosion technique can be successfully used in fabrication of fetal cardiovascular cast model. It is also a reliable method to demonstrate three-dimensional anatomy of severe congenital heart disease and normal heart in fetus.

Caste in Itself, Caste and Class, or Caste in Class

Directory of Open Access Journals (Sweden)

Ramkrishna Mukherjee

2015-08-01

Full Text Available After the British conquered Bengal and eventually the whole of India,they set out to administer the colony. In this context they encountered two phenomena with which they were not familiar: (1 the relation of people to land for production (and not for revenue receiving, household living, etc., and (2 the caste system of India, viz. the jati strati?cation of society.

Solidification of cast iron - A study on the effect of microalloy elements on cast iron

DEFF Research Database (Denmark)

Moumeni, Elham

The present thesis deals with the heat transfer and solidification of ductile and microalloyed grey cast iron. Heterogeneous nucleation of nodular graphite at inclusions in ductile iron during eutectic solidification has been investigated. A series of ductile iron samples with two different...... of the austenite, in the last region to solidify. The superfine graphite which forms in this type of irons is short (10-20µm) and stubby. The microstructure of this kind of graphite flakes in titanium alloyed cast iron is studied using electron microscopy techniques. The methods to prepare samples of cast iron...... for comprehensive transmission electron microscopy of graphite and the surrounding iron matrix have been developed and explained. Dual beam microscopes are used for sample preparation. A TEM study has been carried out on graphite flakes in grey cast iron using selected area electron diffraction (SAED). Based...

Structure fields in the solidifying cast iron roll

Directory of Open Access Journals (Sweden)

W.S. Wołczyński

2010-01-01

Full Text Available Some properties of the rolls depend on the ratio of columnar structure area to equiaxed structure area created during roll solidification. The transition is fundamental phenomenon that can be apply to characterize massive cast iron rolls produced by the casting house. As the first step of simulation, a temperature field for solidifying cast iron roll was created. The convection in the liquid is not comprised since in the first approximation, the convection does not influence the studied occurrence of the (columnar to equiaxed grains transition in the roll. The obtained temperature field allows to study the dynamics of its behavior observed in the middle of the mould thickness. This midpoint of the mould thickness was treated as an operating point for the transition. A full accumulation of the heat in the mould was postulated for the transition. Thus, a plateau at the curve was observed at the midpoint. The range of the plateau existence corresponded to the incubation period , that appeared before fully equiaxed grains formation. At the second step of simulation, behavior of the thermal gradients field was studied. Three ranges within the filed were visible: EC→EC→EC→EC→(tTECtt↔RERCtt↔a/ for the formation of columnar structure (the C – zone: ( and 0>>T&0>>=−>−=REREttGttG.The columnar structure formation was significantly slowed down during incubation period. It resulted from a competition between columnar growth and equiaxed growth expected at that period of time. The 0≈=−=RERCttGttG relationship was postulated to correspond well with the critical thermal gradient, known in the Hunt’s theory. A simulation was performed for the cast iron rolls solidifying as if in industrial condition. Since the incubation divides the roll into two zones: C and E; (the first with columnar structure and the second with fully equiaxed structure some experiments dealing with solidification were made on semi-industrial scale.

The role of water in slip casting

Science.gov (United States)

Mccauley, R. A.; Phelps, G. W.

1984-01-01

Slips and casting are considered in terms of physical and colloidal chemistry. Casting slips are polydisperse suspensions of lyophobic particles in water, whose degree of coagulation is controlled by interaction of flocculating and deflocculating agents. Slip casting rate and viscosity are functions of temperature. Slip rheology and response to deflocculating agents varies significantly as the kinds and amounts of colloid modifiers change. Water is considered as a raw material. Various concepts of water/clay interactions and structures are discussed. Casting is a de-watering operation in which water moves from slip to cast to mold in response to a potential energy termed moisture stress. Drying is an evaporative process from a free water surface.

The CAST Time Projection Chamber

CERN Document Server

Autiero, D.; Carmona, J.M.; Cebrian, S.; Chesi, E.; Davenport, M.; Delattre, M.; Di Lella, L.; Formenti, F.; Irastorza, I.G.; Gomez, H.; Hasinoff, M.; Lakic, B.; Luzon, G.; Morales, J.; Musa, L.; Ortiz, A.; Placci, A.; Rodriguez, A.; Ruz, J.; Villar, J.A.; Zioutas, K.

2007-01-01

One of the three X-ray detectors of the CAST experiment searching for solar axions is a Time Projection Chamber (TPC) with a multi-wire proportional counter (MWPC) as a readout structure. Its design has been optimized to provide high sensitivity to the detection of the low intensity X-ray signal expected in the CAST experiment. A low hardware threshold of 0.8 keV is safely set during normal data taking periods, and the overall efficiency for the detection of photons coming from conversion of solar axions is 62 %. Shielding has been installed around the detector, lowering the background level to 4.10 x 10^-5 counts/cm^2/s/keV between 1 and 10 keV. During phase I of the CAST experiment the TPC has provided robust and stable operation, thus contributing with a competitive result to the overall CAST limit on axion-photon coupling and mass.

Heavy steel casting components for power plants 'mega-components' made of high Cr-steels

Energy Technology Data Exchange (ETDEWEB)

Hanus, Reinhold [voestalpine Giesserei Linz GmbH, Linz (Austria)

2010-07-01

Steel castings of creep resistant steels play a key role in fossil fuel fired power plants for highly loaded components in the high and intermediate pressure section of the turbines. Inner and outer casings, valve casings, inlet connections and elbows are examples of such critical components. The most important characteristic in a power plant is the efficiency, which mainly drives the CO2-emission. As a consequence of steadily improving power plant efficiencies and ever stricter emission standards, steam parameters become more critical and the creep resistance of the cast materials must also be constantly improved. The foundries voestalpine Giesserei Linz and voestalpine Giesserei Traisen participated in the development of the new 9-10% Cr-steels for application up to 625 C/650 C and in the THERMIE project where Ni-base alloys for 700 C-power plants were developed. Beside the material development in the European research projects the commercial production had to be established for industrial processes and the newly developed materials have to be transferred from research into the commercial production of heavy cast components. After selecting the most promising alloy from the laboratory melts, welding tests were performed - mostly with matching electrodes also produced within COST/THERMIE. Base material and welds were investigated in respect of microstructure, creep resistance, mechanical properties and weldability. Heat treatment investigations were also necessary for optimization of the mechanical properties. Based on the results of these studies, pilot components and plates for testing welding processes were cast in order to verify the castability and weldability of larger parts and to make any necessary adjustments to chemical composition, heat treatment or welding parameters. Parallel to the ongoing creep tests within COST/THERMIE-program, the newly developed steel grades were introduced into the commercial production of large components. This involved finding

The forty years of vermicular graphite cast iron development in China (PartⅠ

Directory of Open Access Journals (Sweden)

CHEN Zheng-de

2007-05-01

Full Text Available In China, the research and development of vermicular graphite cast iron (VGCI as a new type of engineering material, were started in the same period as in other developed countries; however, its actual industrial application was even earlier. In China, the deep and intensive studies on VGCI began as early as the 1960s. According to the incomplete statistics to date, more than 600 papers on VGCI have been published by Chinese researchers and scholars at national and international conferences, and in technical journals. More than ten types of production methods and more than thirty types of treatment alloy have been studied. Formulae for calculating the critical addition of treatment alloy required to produce VGCI have been put forward, and mechanisms for explaining the formation of dross during treatment were brought forward. The casting properties, metallographic structure, mechanical and physical properties and machining performance of VGCI, as well as the relationships between them, have all been studied in detail. The Chinese Standards for VGCI and VGCI metallographic structure have been issued. In China, the primary crystallization of VGCI has been studied by many researchers and scholars. The properties of VGCI can be improved by heat treatment and addition of alloying elements enabling its applications to be further expanded. Hundreds of kinds of VGCI castings have been produced and used in vehicles, engines, mining equipment, metallurgical products serviced under alternating thermal load, machinery, hydraulic components, textile machine parts and military applications. The heaviest VGCI casting produced is 38 tons and the lightest is only 1 kg. Currently, the annual production of the VGCI in China is about 200 000 tons. The majority of castings are made from cupola iron without pre-treatment, however, they are also produced from electric furnaces and by duplex melting from cupolaelectric furnaces or blast furnace-electric furnace

Improvement of Artistic Cast Production System

Directory of Open Access Journals (Sweden)

Władysiak R.

2017-09-01

Full Text Available The paper presents the technology and organization of the artistic cast production. On the basis of the actual cast production system, the manufacturing process was shown, in particular sand–piece moulding, which is a very important process and a time-consuming part of the entire manufacture of the casts. The current state of the production process as well as the organization of the work and production technology were analysed with the use of methods and techniques of production improvement, the Lean Manufacturing concept and computer systems. The results of the analysis and studies were shown with use of schemes and graphs of the layout of the production resources, a flow chart of the production process, value stream mapping, and a costs table for the production and modernization of the moulding stage. The work has shown that there are possibilities to improve the artistic cast production system. This improvement leads to increased productivity, lower production costs of artistic casts and increased competitiveness of the foundry.

The X-ray Telescope of CAST

CERN Document Server

Kuster, M.; Cebrian, S.; Davenport, M.; Elefteriadis, C.; Englhauser, J.; Fischer, H.; Franz, J.; Friedrich, P.; Hartmann, R.; Heinsius, F.H.; Hoffmann, D.H.H.; Hoffmeister, G.; Joux, J.N.; Kang, D.; Konigsmann, Kay; Kotthaus, R.; Papaevangelou, T.; Lasseur, C.; Lippitsch, A.; Lutz, G.; Morales, J.; Rodriguez, A.; Struder, L.; Vogel, J.; Zioutas, K.

2007-01-01

The Cern Axion Solar Telescope (CAST) is in operation and taking data since 2003. The main objective of the CAST experiment is to search for a hypothetical pseudoscalar boson, the axion, which might be produced in the core of the sun. The basic physics process CAST is based on is the time inverted Primakoff effect, by which an axion can be converted into a detectable photon in an external electromagnetic field. The resulting X-ray photons are expected to be thermally distributed between 1 and 7 keV. The most sensitive detector system of CAST is a pn-CCD detector combined with a Wolter I type X-ray mirror system. With the X-ray telescope of CAST a background reduction of more than 2 orders off magnitude is achieved, such that for the first time the axion photon coupling constant g_agg can be probed beyond the best astrophysical constraints g_agg < 1 x 10^-10 GeV^-1.

CASTing light on dark matter particles

CERN Multimedia

2005-01-01

CERN's CAST collaboration recently released first results from its search for solar axions, a candidate dark matter particle. Though they haven't found any axions yet, they have done much to narrow the hunt. The CAST experiment. Physicists think the universe is permeated with dark matter, particles that don't emit or absorb radiation and so are invisible to traditional telescopes. So far no one has found direct signs of dark matter. A different breed of telescope, however, may be able to see such particles. CERN's Axion Solar Telescope (CAST), currently the world's only working axion helioscope, is a superconducting test magnet from the Large Hadron Collider (LHC) that has been refurbished and outfitted with X-ray detectors, plus a focusing mirror system for X-rays that was recovered from the German space program. CAST stares into the sun in search of particles called axions, one of the leading candidates for dark matter. On 9 November, the CAST collaboration released the results of their first experimen...

The Catalyst Scholarship Program at Hunter College. A Partnership among Earth Science, Physics, Computer Science and Mathematics

Science.gov (United States)

Salmun, Haydee; Buonaiuto, Frank

2016-01-01

The Catalyst Scholarship Program at Hunter College of The City University of New York (CUNY) was established with a four-year award from the National Science Foundation (NSF) to fund scholarships to 40 academically talented but financially disadvantaged students majoring in four disciplines of science, technology, engineering and mathematics…

New progresses of Chinese art casting

Directory of Open Access Journals (Sweden)

Tan Derui

2007-05-01

Full Text Available The Chinese art casting with 5 000 years history has been rapidly developed in recent ten years. This benefits from the great development of Chinese economy, the large-scale urban construction and transformation, the increasing demands for the cultural work of art, the loose religious environment and the expanding international market. The Art Casting Technical Committee of China Foundry Association has been established for 10 years. Almost 90 art casting enterprises joined in the organization, not including nearly thousand enterprises of foreign capital and massive domestic workshop type. It is estimated that the scale and the output of art castings in mainland China have situated the world front row.

Strip casting apparatus and method

Science.gov (United States)

Williams, R.S.; Baker, D.F.

1988-09-20

Strip casting apparatus including a molten-metal-holding container and a nozzle to deposit molten metal onto a moving chill drum to directly cast continuous metallic strip. The nozzle body includes a slot bounded between a back and a front lip. The slot width exceeds about 20 times the gap distance between the nozzle and the chill drum surface. Preferably, the slot width exceeds 0.5 inch. This method of strip casting minimizes pressure drop, insuring better metal-to-chill-drum contact which promotes heat transfer and results in a better quality metallic strip. 6 figs.

Delamination wear mechanism in gray cast irons

International Nuclear Information System (INIS)

Salehi, M.

2000-01-01

An investigation of the friction and sliding wear of gray cast iron against chromium plated cast irons was carried out on a newly constructed reciprocating friction and wear tester. The tests were the first to be done on the test rig under dry conditions and at the speed of 170 cm/min, and variable loads of 20-260 N for a duration of 15 min. to 3 hours. The gray cast iron surfaces worn by a process of plastic deformation at the subsurface, crack nucleation, and crack growth leading to formation of plate like debris and therefore the delamination theory applies. No evidence of adhesion was observed. This could be due to formation of oxides on the wear surface which prevent adhesion. channel type chromium plating ''picked'' up cast iron from the counter-body surfaces by mechanically trapping cast iron debris on and within the cracks. The removal of the plated chromium left a pitted surface on the cast iron

An Evaluation of ToxCast Angiogenic Disruptors for Effects on Mitochondrial Bioactivity Profiles (Teratology Society Annual Meeting)

Science.gov (United States)

Angiogenesis is a critical developmental process and a potential target for chemical teratogenesis. Over one-tenth of the Tox21 library of 10,000 compounds have been shown to disrupt mitochondrial function [Attene-Ramos et al., 2015]. Previous studies utilizing ToxCast chemicals ...

Effect of flask vibration time on casting integrity, Surface Penetration and Coating Inclusion in lost foam casting of Al-Si Alloy

International Nuclear Information System (INIS)

Karimian, Majid; Idris, M. H.; Ourdjini, A.; Muthu, Kali

2011-01-01

The paper presents the result of an experimental investigation conducted on medium aluminum silicon alloy casting- LM6, using no-vacuum assisted lost foam casting process. The study is directed for establishing the relationship between the flask vibrations times developed for molded sample on the casting integrity, surface penetration and coating inclusion defects of the casting. Four different flask vibration times namely 180, 120, 90 and 60 sec. were investigated. The casting integrity was investigated in terms of fulfilling in all portions and edges. The surface penetration was measured using optical microscope whilst image analyzer was used to quantify the percentage of coating inclusion in the casting. The results show that vibration time has significant influence on the fulfilling as well as the internal integrity of the lost foam casting. It was found that the lower vibration time produced comparatively sound casing.

A comparison between the dimensions of positive transtibial residual limb molds prepared by air pressure casting and weight-bearing casting methods.

Science.gov (United States)

Hajiaghaei, Behnam; Ebrahimi, Ismail; Kamyab, Mojtaba; Saeedi, Hassan; Jalali, Maryam

2016-01-01

Creating a socket with proper fit is an important factor to ensure the comfort and control of prosthetic devices. Several techniques are commonly used to cast transtibial stumps but their effect on stump shape deformation is not well understood. This study compares the dimensions, circumferences and volumes of the positive casts and also the socket comfort between two casting methods. Our hypothesis was that the casts prepared by air pressure method have less volume and are more comfortable than those prepared by weight bearing method. Fifteen transtibial unilateral amputees participated in the study. Two weight bearing and air pressure casting methods were utilized for their residual limbs. The diameters and circumferences of various areas of the residual limbs and positive casts were compared. The volumes of two types of casts were measured by a volumeter and compared. Visual Analogue Scale (VAS) was used to measure the sockets fit comfort. Circumferences at 10 and 15 cm below the patella on the casts were significantly smaller in air pressure casting method compared to the weight bearing method (p=0.00 and 0.01 respectively). The volume of the cast in air pressure method was lower than that of the weight bearing method (p=0.006). The amputees found the fit of the sockets prepared by air pressure method more comfortable than the weight bearing sockets (p=0.015). The air pressure casting reduced the circumferences of the distal portion of residual limbs which has more soft tissue and because of its snug fit it provided more comfort for amputees, according to the VAS measurements.

Genetic evidence on the origins of Indian caste populations.

Science.gov (United States)

Bamshad, M; Kivisild, T; Watkins, W S; Dixon, M E; Ricker, C E; Rao, B B; Naidu, J M; Prasad, B V; Reddy, P G; Rasanayagam, A; Papiha, S S; Villems, R; Redd, A J; Hammer, M F; Nguyen, S V; Carroll, M L; Batzer, M A; Jorde, L B

2001-06-01

The origins and affinities of the approximately 1 billion people living on the subcontinent of India have long been contested. This is owing, in part, to the many different waves of immigrants that have influenced the genetic structure of India. In the most recent of these waves, Indo-European-speaking people from West Eurasia entered India from the Northwest and diffused throughout the subcontinent. They purportedly admixed with or displaced indigenous Dravidic-speaking populations. Subsequently they may have established the Hindu caste system and placed themselves primarily in castes of higher rank. To explore the impact of West Eurasians on contemporary Indian caste populations, we compared mtDNA (400 bp of hypervariable region 1 and 14 restriction site polymorphisms) and Y-chromosome (20 biallelic polymorphisms and 5 short tandem repeats) variation in approximately 265 males from eight castes of different rank to approximately 750 Africans, Asians, Europeans, and other Indians. For maternally inherited mtDNA, each caste is most similar to Asians. However, 20%-30% of Indian mtDNA haplotypes belong to West Eurasian haplogroups, and the frequency of these haplotypes is proportional to caste rank, the highest frequency of West Eurasian haplotypes being found in the upper castes. In contrast, for paternally inherited Y-chromosome variation each caste is more similar to Europeans than to Asians. Moreover, the affinity to Europeans is proportionate to caste rank, the upper castes being most similar to Europeans, particularly East Europeans. These findings are consistent with greater West Eurasian male admixture with castes of higher rank. Nevertheless, the mitochondrial genome and the Y chromosome each represents only a single haploid locus and is more susceptible to large stochastic variation, bottlenecks, and selective sweeps. Thus, to increase the power of our analysis, we assayed 40 independent, biparentally inherited autosomal loci (1 LINE-1 and 39 Alu elements

Modelling the effect of coating on the stresses and microstructure evolution in chill casting of wind turbine main shafts

DEFF Research Database (Denmark)

Sonne, Mads Rostgaard; Thorborg, J.; Hattel, Jesper Henri

2017-01-01

The purpose of the present work is to quantify the effect of the inside coating on chills for casting of large wind turbine main shafts with respect to the evolution of internal stresses. These are known to affect the lifetime of the chills, and this is a major cost for the foundries today. Simul......, it is concluded that the material quality obtained from casting the main shafts in chills (and hence the performance of the part) is still much better than for sand casting, even though a very thick layer of coating is applied. Copyright © 2017 John Wiley & Sons, Ltd....... in the simulations. The outcome is validated by comparisons with samples taken out from a critical region of main shafts cast in sand and in chills. The results reveal minor reductions in the maximum principal stresses on the inner and outer surfaces of the chill of 3.1% and 18.5%, respectively, from changing...

Microsegregation in Nodular Cast Iron with Carbides

Directory of Open Access Journals (Sweden)

S. Pietrowski

2012-12-01

Full Text Available In this paper results of microsegregation in the newly developed nodular cast iron with carbides are presented. To investigate the pearlitic and bainitic cast iron with carbides obtained by Inmold method were chosen. The distribution of linear elements on the eutectic cell radius was examined. To investigate the microsegregation pearlitic and bainitic cast iron with carbides obtained by Inmold method were chosen.The linear distribution of elements on the eutectic cell radius was examined. Testing of the chemical composition of cast iron metal matrix components, including carbides were carried out. The change of graphitizing and anti-graphitizing element concentrations within eutectic cell was determined. It was found, that in cast iron containing Mo carbides crystallizing after austenite + graphite eutectic are Si enriched.

Microsegregation in Nodular Cast Iron with Carbides

Directory of Open Access Journals (Sweden)

Pietrowski S.

2012-12-01

Full Text Available In this paper results of microsegregation in the newly developed nodular cast iron with carbides are presented. To investigate the pearlitic and bainitic cast iron with carbides obtained by Inmold method were chosen. The distribution of linear elements on the eutectic cell radius was examined. To investigate the microsegregation pearlitic and bainitic cast iron with carbides obtained by Inmold method were chosen. The linear distribution of elements on the eutectic cell radius was examined. Testing of the chemical composition of cast iron metal matrix components, including carbides were carried out. The change of graphitizing and anti-graphitizing element concentrations within eutectic cell was determined. It was found, that in cast iron containing Mo carbides crystallizing after austenite + graphite eutectic are Si enriched.

Simulation of Distortion and Residual Stress Development During Heat Treatment of Steel Castings

Energy Technology Data Exchange (ETDEWEB)

Beckermann, Christoph; Carlson, Kent

2011-07-22

Heat treatment and associated processing, such as quenching, are critical during high strength steel casting production. These processes must be managed closely to prevent thermal and residual stresses that may result in distortion, cracking (particularly after machining), re-work, and weld repair. The risk of casting distortion limits aggressive quenching that can be beneficial to the process and yield an improved outcome. As a result of these distortions, adjustments must be made to the casting or pattern design, or tie bars must be added. Straightening castings after heat treatments can be both time-consuming and expensive. Residual stresses may reduce a casting's overall service performance, possibly resulting in catastrophic failure. Stress relieving may help, but expends additional energy in the process. Casting software is very limited in predicting distortions during heat treatment, so corrective measures most often involve a tedious trial-and-error procedure. An extensive review of existing heat treatment residual stress and distortion modeling revealed that it is vital to predict the phase transformations and microstructure of the steel along with the thermal stress development during heat treatment. After reviewing the state-of-the-art in heat treatment residual stress and distortion modeling, an existing commercial code was selected because of its advanced capabilities in predicting phase transformations, the evolving microstructure and related properties along with thermal stress development during heat treatment. However, this software was developed for small parts created from forgings or machined stock, and not for steel castings. Therefore, its predictive capabilities for heat treatment of steel castings were investigated. Available experimental steel casting heat treatment data was determined to be of insufficient detail and breadth, and so new heat treatment experiments were designed and performed, casting and heat treating modified versions

New progresses of Chinese art casting

OpenAIRE

Tan Derui

2007-01-01

The Chinese art casting with 5 000 years history has been rapidly developed in recent ten years. This benefits from the great development of Chinese economy, the large-scale urban construction and transformation, the increasing demands for the cultural work of art, the loose religious environment and the expanding international market. The Art Casting Technical Committee of China Foundry Association has been established for 10 years. Almost 90 art casting enterprises joined in the organizatio...

The CAST time projection chamber

International Nuclear Information System (INIS)

Autiero, D; Beltran, B; Carmona, J M; Cebrian, S; Chesi, E; Davenport, M; Delattre, M; Di Lella, L; Formenti, F; Irastorza, I G; Gomez, H; Hasinoff, M; Lakic, B; Luzon, G; Morales, J; Musa, L; Ortiz, A; Placci, A; Rodrigurez, A; Ruz, J; Villar, J A; Zioutas, K

2007-01-01

One of the three x-ray detectors of the CERN Axion Solar Telescope (CAST) experiment searching for solar axions is a time projection chamber (TPC) with a multi-wire proportional counter (MWPC) as a readout structure. Its design has been optimized to provide high sensitivity to the detection of the low intensity x-ray signal expected in the CAST experiment. A low hardware threshold of 0.8 keV is set to a safe level during normal data taking periods, and the overall efficiency for the detection of photons coming from conversion of solar axions is 62%. Shielding has been installed around the detector, lowering the background level to 4.10 x 10 -5 counts cm -2 s -1 keV -1 between 1 and 10 keV. During phase I of the CAST experiment the TPC has provided robust and stable operation, thus contributing with a competitive result to the overall CAST limit on axion-photon coupling and mass

Triple Plate Mold Final Report: Optimization of the Mold Design and Casting Parameters for a Thin U-10mo Fuel Casting

Energy Technology Data Exchange (ETDEWEB)

Aikin, Jr., Robert M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-01-04

This work describes the experiments and modeling that have been performed to improve and try to optimize the simultaneous casting of three plates of U-10wt%Mo in a single coil vacuum induction melting (VIM) furnace. The plates of interest are 280 mm wide by 203 mm tall by 5 mm thick (11" x 8" x 0.2"). The initial mold design and processing parameters were supplied by Y-12. The mold and casting cavity were instrumented with a number of thermocouples, and the casting performed to determine the thermal history of the mold and casting. The resulting cast plates were radiographed and numerous defects identified. Metallography was performed to help identify the nature of the radiographically observed defects. This information was then used to validate a mold filling and solidification model of that casting. Based on the initial casting, good casting design practice, and process simulation of several design alternatives, a revised design was developed with the goal of minimizing casting defects such as porosity. The redesigned mold had a larger hot-top and had its long axis along the horizontal direction. These changes were to try to develop a strong thermal gradient conducive to good feeding and minimization of micro- and macroporosity in the cast plates. An instrumented casting was then performed with the revised mold design and a linear distributor. This design yielded cast plates with significantly less radiographically identified defects. Unfortunately, there was significant variation in plate weight and metal content in their hot-tops. Fluid flow simulations were then performed on this mold/distributor design. This helped identify the issue with this linear distributor design. Additional simulations were then performed on candidate distributor redesigns and a preferred distributor annular design was identified. This improved annular design was used to produce a third instrumented casting with favorable results. These refined designs and their radiographic

Influence of Modification and Casting Technology on Structure of IN-713C Superalloy Castings

Directory of Open Access Journals (Sweden)

Binczyk F.

2016-09-01

Full Text Available The paper presents the results concerning impact of modification (volume and surface techniques, pouring temperature and mould temperature on stereological parameters of macrostructure in IN713C castings made using post-production scrap. The ability to adjust the grain size is one of the main issues in the manufacturing of different nickel superalloy castings used in aircraft engines. By increasing the grain size one can increase the mechanical properties, like diffusion creep resistance, in higher temperatures. The fine grained castings. on the other hand, have higher mechanical properties in lower temperatures and higher resistance to thermal fatigue. The test moulds used in this study, supplied by Pratt and Whitney Rzeszow, are ordinarily used to cast the samples for tensile stress testing. Volume modification was carried out using the patented filter containing cobalt aluminate. The macrostructure was described using the number of grains per mm2, mean grain surface area and shape index. Obtained results show strong relationship between the modification technique, pouring temperature and grain size. There was no significant impact of mould temperature on macrostructure.

Chemical casting of high-Tc superconducting BiSCCO

International Nuclear Information System (INIS)

Toth, L.E.; Das, B.N.; Rayne, R.J.; Bender, B.A.; Lechter, W.L.; Hoff, H.A.; Osofsky, M.S.; Soulen, R.J. Jr.

1989-01-01

BiSCCO has been successfully cast into a number of useful shapes. This casting process differs significantly from traditional casting in that the process includes a change in the oxygen content of the melt. A heat treatment is required to restore the original chemistry, properly form the BiSCCO crystal structure and develop the superconducting properties. This paper emphasizes the microstructures of as-cast and heat treated BiSCCO. Casting causes considerable grain alignment of the BiSCCO platelets. The platelets align preferentially along the thermal gradients which exist during the solidification process

Development of casting techniques for uranium and uranium alloys

International Nuclear Information System (INIS)

Singh, S.P.

2003-01-01

The casting process concerning furnace set-up, mould temperatures, pouring temperatures, out gassing, post heating, casting recovery and crucible and mould clean-up is discussed. Some applications of casting theory can be made in practice, but experience in handling the metal is most valuable in the successful solution of a new problem. The casting of uranium alloys using induction stirring of the melt to promote homogeneity in the casting is described. A few remarks are made concerning safety aspects associated with the casting of uranium

Microstructured metal molds fabricated via investment casting

International Nuclear Information System (INIS)

Cannon, Andrew H; King, William P

2010-01-01

This paper describes an investment casting process to produce aluminum molds having integrated microstructures. Unlike conventional micromolding tools, the aluminum mold was large and had complex curved surfaces. The aluminum was cast from curved microstructured ceramic molds which were themselves cast from curved microstructured rubber. The aluminum microstructures had an aspect ratio of 1:1 and sizes ranging from 25 to 50 µm. Many structures were successfully cast into the aluminum with excellent replication fidelity, including circular, square and triangular holes. We demonstrate molding of large, curved surfaces having surface microstructures using the aluminum mold.

The human and the inhuman: visual culture, political culture, and the images produced by George Rodger and Henri Cartier-Bresson in the Nazi concentration camps

Directory of Open Access Journals (Sweden)

Erika Cazzonatto Zerwes

2016-08-01

Full Text Available This article aims to grasp some aspects of the notion of humanism in photography and its closeness to the political culture and the visual culture in the period, through the specific experiences of George Rodger and Henri Cartier-Bresson, two photographers who were first-hand witnesses and provided accounts of horror in the Nazi concentration camps at the end of World War II. George Rodger photographed the Bergen-Belsen camp as soon as it was liberated by the British troops. Henri Cartier-Bresson was there with a film crew recording the deported masses newly freed from the Nazi concentration and extermination camps. These experiences came to have profound impact on the biography and work of both of them. In the two cases, there is a notion of humanism linked to World War II events, which is observed in photography and photographic representation, and it has a significant consequence for the contemporary visual culture.   Keywords: Visual Culture; Political Culture; War Photography; Photojournalism; Concentration Camps.   Original title: O humano e o desumano: cultura visual, cultura política e as imagens feitas por George Rodger e Henri Cartier-Bresson nos campos de concentração nazistas.

Modern Cast Irons in Chemical Engineering

Science.gov (United States)

1934-11-09

fl’ceew. T I SOCIETY OF CHEMICAL INDUSTRY CHEMICAL ENGINEERING GROUP MODERN CAST IRONS IN CHEMICAL ENGINEERING By J. G. PEARCE, M.Sc., F.Inst.P...CAST IRONS IN CHEMICAL ENGINEERING By J. G. PEARCE, M.Sc., F.Inst.P., M.I.E.E.* INTRODUCTION to chemical or thermal resistance. Small blow-holes Any...consideration of modern cast irons in chemical seldom appear to reduce the mechanical strength of engineering should strictly be prefaced by a definition

Selected properties of new „duplex” cast steel

Directory of Open Access Journals (Sweden)

S. Pietrowski

2011-10-01

Full Text Available In this paper selected properties of new „duplex” cast steel are presented. The new cast steel was devised in HYDRO-VACUUM company in Grudziądz, where “duplex” cast steel for pump elements is smelted. The goal was to devise a new grade of “duplex” cast steel of better physicochemical properties and cheaper than now applied. It was demonstrated, that there is the possibility of devising the new grade of “duplex” cast steel. It is characterized by higher mechanical properties, similar wear resistance and greater corrosion resistance in 15% water solution of H2SO4 in comparison to now applied “duplex” cast steel. The chemical composition was selected to obtain in microstructure about of 50% ferrite and 50% austenite. It guarantee the highest properties and the lowest costs of its smelting.In the paper results of: the microstructure, Rm, Rp0,2, A5, HB, wear resistance and corrosion resistance in water solution of 15% HCl and H2SO4 acids of new cast steel was presented. They were compared with now applied in HYDRO-VACUUM company “duplex” cast steel.

Fan Fuel Casting Final Report

Energy Technology Data Exchange (ETDEWEB)

Imhoff, Seth D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-28

LANL was approached to provide material and design guidance for a fan-shaped fuel element. A total of at least three castings were planned. The first casting is a simple billet mold to be made from high carbon DU-10Mo charge material. The second and third castings are for optimization of the actual fuel plate mold. The experimental scope for optimization is only broad enough for a second iteration of the mold design. It is important to note that partway through FY17, this project was cancelled by the sponsor. This report is being written in order to capture the knowledge gained should this project resume at a later date.

The x-ray telescope of CAST

Energy Technology Data Exchange (ETDEWEB)

Kuster, M [Technische Universitaet Darmstadt, IKP, Schlossgartenstrasse 9, D-64289 Darmstadt (Germany); Braeuninger, H [Max-Planck-Institut fuer extraterrestrische Physik, Giessenbachstrasse, D-85748 Garching (Germany); Cebrian, S [Laboratorio de Fisica Nuclear y Altas Energias, Universidad de Zaragoza, E-50009 Zaragoza (Spain)] (and others)

2007-06-15

The CERN Axion Solar Telescope (CAST) has been in operation and taking data since 2003. The main objective of the CAST experiment is to search for a hypothetical pseudoscalar boson, the axion, which might be produced in the core of the sun. The basic physics process CAST is based on is the time inverted Primakoff effect, by which an axion can be converted into a detectable photon in an external electromagnetic field. The resulting x-ray photons are expected to be thermally distributed between 1 and 7 keV. The most sensitive detector system of CAST is a pn-CCD detector combined with a Wolter I type x-ray mirror system. With the x-ray telescope of CAST a background reduction of more than 2 orders of magnitude is achieved, such that for the first time the axion photon coupling constant g{sub a{gamma}}{sub {gamma}} can be probed beyond the best astrophysical constraints g{sub a{gamma}}{sub {gamma}} < 1 x 10{sup -10} GeV{sup -1}.

Casting methods

Science.gov (United States)

Marsden, Kenneth C.; Meyer, Mitchell K.; Grover, Blair K.; Fielding, Randall S.; Wolfensberger, Billy W.

2012-12-18

A casting device includes a covered crucible having a top opening and a bottom orifice, a lid covering the top opening, a stopper rod sealing the bottom orifice, and a reusable mold having at least one chamber, a top end of the chamber being open to and positioned below the bottom orifice and a vacuum tap into the chamber being below the top end of the chamber. A casting method includes charging a crucible with a solid material and covering the crucible, heating the crucible, melting the material, evacuating a chamber of a mold to less than 1 atm absolute through a vacuum tap into the chamber, draining the melted material into the evacuated chamber, solidifying the material in the chamber, and removing the solidified material from the chamber without damaging the chamber.

Latest results of cast and future prospects

CERN Document Server

Vafeiadis, Theodoros

2014-01-01

CERN Axion Solar Telescope (CAST) is currently the most sensitive axion helioscope designed to search for axions and axion-like particles produced in the Sun. CAST completed successfully the second part of CAST phase II where the magnet bores were lled with 3He gas at variable pressure scanning axion masses up to 1.2 eV In the absence of signal it has set the best experimental limit on the axion-photon coupling constant over a broad range of axion masses. In 2013 CAST has improved its sensitivity to solar axions with rest mass below 0.02 eV by upgrading the Micromegas detectors and it will continue in 2014 with the implementation of a second X-ray optic and a new type detector (InGRID). In addition, CAST has extended its sensitivity into the sub-keV energy range using a silicon detector (SDD), to search for solar chameleons. Thus, CAST also became sensitive to dark energy particles. A new generation axion helioscope (IAXO) aims to improve the current axion-photon coupling by 1-1.5 orders of magnitude. This wi...

design, construction and performance evaluation of multiple casting

African Journals Online (AJOL)

eobe

time taken for solidification, plays an important role in the casting. There should not ... Keywords: Design, Construction, Multiple casting machine, Compo Casting operation. 1. Introduction .... metal and pathway channel pipe with heater is used.

Fast and robust ray casting algorithms for virtual X-ray imaging

International Nuclear Information System (INIS)

Freud, N.; Duvauchelle, P.; Letang, J.M.; Babot, D.

2006-01-01

Deterministic calculations based on ray casting techniques are known as a powerful alternative to the Monte Carlo approach to simulate X- or γ-ray imaging modalities (e.g. digital radiography and computed tomography), whenever computation time is a critical issue. One of the key components, from the viewpoint of computing resource expense, is the algorithm which determines the path length travelled by each ray through complex 3D objects. This issue has given rise to intensive research in the field of 3D rendering (in the visible light domain) during the last decades. The present work proposes algorithmic solutions adapted from state-of-the-art computer graphics to carry out ray casting in X-ray imaging configurations. This work provides an algorithmic basis to simulate direct transmission of X-rays, as well as scattering and secondary emission of radiation. Emphasis is laid on the speed and robustness issues. Computation times are given in a typical case of radiography simulation

Fast and robust ray casting algorithms for virtual X-ray imaging

Energy Technology Data Exchange (ETDEWEB)

Freud, N. [CNDRI, Laboratory of Nondestructive Testing Using Ionizing Radiations, INSA-Lyon Scientific and Technical University, Bat. Antoine de Saint-Exupery, 20, Avenue Albert Einstein, 69621 Villeurbanne Cedex (France)]. E-mail: Nicolas.Freud@insa-lyon.fr; Duvauchelle, P. [CNDRI, Laboratory of Nondestructive Testing Using Ionizing Radiations, INSA-Lyon Scientific and Technical University, Bat. Antoine de Saint-Exupery, 20, Avenue Albert Einstein, 69621 Villeurbanne Cedex (France); Letang, J.M. [CNDRI, Laboratory of Nondestructive Testing Using Ionizing Radiations, INSA-Lyon Scientific and Technical University, Bat. Antoine de Saint-Exupery, 20, Avenue Albert Einstein, 69621 Villeurbanne Cedex (France); Babot, D. [CNDRI, Laboratory of Nondestructive Testing Using Ionizing Radiations, INSA-Lyon Scientific and Technical University, Bat. Antoine de Saint-Exupery, 20, Avenue Albert Einstein, 69621 Villeurbanne Cedex (France)

2006-07-15

Deterministic calculations based on ray casting techniques are known as a powerful alternative to the Monte Carlo approach to simulate X- or {gamma}-ray imaging modalities (e.g. digital radiography and computed tomography), whenever computation time is a critical issue. One of the key components, from the viewpoint of computing resource expense, is the algorithm which determines the path length travelled by each ray through complex 3D objects. This issue has given rise to intensive research in the field of 3D rendering (in the visible light domain) during the last decades. The present work proposes algorithmic solutions adapted from state-of-the-art computer graphics to carry out ray casting in X-ray imaging configurations. This work provides an algorithmic basis to simulate direct transmission of X-rays, as well as scattering and secondary emission of radiation. Emphasis is laid on the speed and robustness issues. Computation times are given in a typical case of radiography simulation.

Nonaqueous slip casting of high temperature ceramic superconductors using an investment casting technique

Science.gov (United States)

Hooker, Matthew W. (Inventor); Taylor, Theodore D. (Inventor); Wise, Stephanie A. (Inventor); Buckley, John D. (Inventor); Vasquez, Peter (Inventor); Buck, Gregory M. (Inventor); Hicks, Lana P. (Inventor)

1993-01-01

A process for slip casting ceramic articles that does not employ parting agents and affords the casting of complete, detailed, precision articles that do not possess parting lines is presented. This process is especially useful for high temperature superconductors and water-sensitive ceramics. A wax pattern for a shell mold is provided, and an aqueous mixture of a calcium sulfate-bonded investment material is applied as a coating to the wax pattern. The coated wax pattern is then dried, followed by curing to vaporize the wax pattern and leave a shell mold of the calcium sulfate-bonded investment material. The shell mold is cooled to room temperature, and a ceramic slip, created by dispersing a ceramic powder in an organic liquid, is poured therein. After a ceramic shell of desired thickness or a solid article has set up in the shell mold, excess ceramic slip is poured out. The shell mold is misted with water and peeled away from the ceramic article, after which the ceramic is fired to provide a complete, detailed, precision, high temperature superconductive ceramic article without parting lines. The casting technique may take place in the presence of a magnetic field to orient the ceramic powders during the casting process.

High quality steel casting for energy technics

International Nuclear Information System (INIS)

Schuster, F.; Koefler, G.

1982-01-01

The casting of several chromium-molybdenum steels for steam and hydraulic turbines is discussed. Non-destructive testing of the castings is performed demonstrating the safety for use in nuclear technology. The effect of metallurgical parameters on steel casting quality, the heat treatment, and the effect of construction design on costs for fettling and repair weldings are considered. (Auth.)

CAST with its micromegas detector installed.

CERN Multimedia

Maximilien Brice

2002-01-01

The CERN Axion Solar Telescope (CAST) uses a prototype LHC dipole magnet to search for very weakly interacting neutral particles called axions, which should originate in the core of the Sun. The magnet converts the solar axions to photons which are then detected by an X-ray detector based on Micromegas technology. CAST's Micromegas detector has now been installed. Photos 01 02: General view of the CAST experiment with the Micromegas detector in place. Photo 03: Close-up of the micromegas set-up.

Hunter-gatherer adaptations and environmental change in the southern Great Basin: The evidence from Pahute and Rainier mesas

Energy Technology Data Exchange (ETDEWEB)

Pippin, L.C.

1998-06-01

This paper reviews the evidence for fluctuations in past environments in the southern Great Basin and examines how these changes may have affected the strategies followed by past hunter and gatherers in their utilization of the resources available on a highland in this region. The evidence used to reconstruct past environments for the region include botanical remains from packrat middens, pollen spectra from lake and spring deposits, faunal remains recovered from archaeological and geologic contexts, tree-ring indices from trees located in sensitive (tree-line) environments, and eolian, alluvial and fluvial sediments deposited in a variety of contexts. Interpretations of past hunter and gatherer adaptive strategies are based on a sample of 1,311 archaeological sites recorded during preconstruction surveys on Pahute and Rainier mesas in advance of the US Department of Energy`s nuclear weapons testing program. Projectile point chronologies and available tree-ring, radiocarbon, thermoluminescence and obsidian hydration dates were used to assign these archaeological sites to specific periods of use.

Vessel guardians: sculpture and graphics related to the ceramics of NorthEastern European hunter-gatherers

Directory of Open Access Journals (Sweden)

Ekaterina Aleksandrovna Kashina

2015-12-01

Full Text Available North-Eastern European hunter-gatherer ceramic sculptures, relief sculptures and graphic images on vessels are discussed. Five groups of finds are distinguished according to their chronology (4000–2500 BC cal and represented subject (birds, human head, human figure, mammal head etc.. Their production believes to be a female craft, their making had ritual aims and their emerging was independent from any influences of pastoral/agricultural societies.

The red atom. The help at USSR of German scientists between 1945 and 1961. how did USSR recover the nazi uranium

International Nuclear Information System (INIS)

Andurand, R.

2009-01-01

In the previous chapters was exposed the saga of German scientists that worked for Soviet scientists from 1945 to 1961 and allowed these ones to make up for the delay in a record time they had on the American people. However, without the help of German scientists, that were at exceptional level they would succeed regardless but they would take the same time than the others ones to reach the same result. To be complete, one should, in this fourth chapter, precise how the Soviet people succeeded to recover the uranium from the nazi nuclear programme. (N.C.)

Research on Soft Reduction Amount Distribution to Eliminate Typical Inter-dendritic Crack in Continuous Casting Slab of X70 Pipeline Steel by Numerical Model

Science.gov (United States)

Liu, Ke; Wang, Chang; Liu, Guo-liang; Ding, Ning; Sun, Qi-song; Tian, Zhi-hong

2017-04-01

To investigate the formation of one kind of typical inter-dendritic crack around triple point region in continuous casting(CC) slab during the operation of soft reduction, fully coupled 3D thermo-mechanical finite element models was developed, also plant trials were carried out in a domestic continuous casting machine. Three possible types of soft reduction amount distribution (SRAD) in the soft reduction region were analyzed. The relationship between the typical inter-dendritic cracks and soft reduction conditions is presented and demonstrated in production practice. Considering the critical strain of internal crack formation, a critical tolerance for the soft reduction amount distribution and related casing parameters have been proposed for better contribution of soft reduction to the internal quality of slabs. The typical inter-dendritic crack around the triple point region had been eliminated effectively through the application of proposed suggestions for continuous casting of X70 pipeline steel in industrial practice.

Energy use in selected metal casting facilities - 2003

Energy Technology Data Exchange (ETDEWEB)

Eppich, Robert E. [Eppich Technologies, Syracuse, IN (United States)

2004-05-01

This report represents an energy benchmark for various metal casting processes. It describes process flows and energy use by fuel type and processes for selected casting operations. It also provides recommendations for improving energy efficiency in casting.

Social networks and cooperation in hunter-gatherers.

Science.gov (United States)

Apicella, Coren L; Marlowe, Frank W; Fowler, James H; Christakis, Nicholas A

2012-01-25

Social networks show striking structural regularities, and both theory and evidence suggest that networks may have facilitated the development of large-scale cooperation in humans. Here, we characterize the social networks of the Hadza, a population of hunter-gatherers in Tanzania. We show that Hadza networks have important properties also seen in modernized social networks, including a skewed degree distribution, degree assortativity, transitivity, reciprocity, geographic decay and homophily. We demonstrate that Hadza camps exhibit high between-group and low within-group variation in public goods game donations. Network ties are also more likely between people who give the same amount, and the similarity in cooperative behaviour extends up to two degrees of separation. Social distance appears to be as important as genetic relatedness and physical proximity in explaining assortativity in cooperation. Our results suggest that certain elements of social network structure may have been present at an early point in human history. Also, early humans may have formed ties with both kin and non-kin, based in part on their tendency to cooperate. Social networks may thus have contributed to the emergence of cooperation.

‘IN PURSUIT OF THE NAZI MIND?’ THE DEPLOYMENT OF PSYCHOANALYSIS IN THE ALLIED STRUGGLE AGAINST GERMANY

Science.gov (United States)

Pick, Daniel

2013-01-01

This paper discusses how psychoanalytic ideas were brought to bear in the Allied struggle against the Third Reich and explores some of the claims that were made about this endeavour. It shows how a variety of studies of Fascist psychopathology, centred on the concept of superego, were mobilized in military intelligence, postwar planning and policy recommendations for ‘denazification’. Freud’s ideas were sometimes championed by particular army doctors and government planners; at other times they were combined with, or displaced by, competing, psychiatric and psychological forms of treatment and diverse studies of the Fascist ‘personality’. This is illustrated through a discussion of the treatment and interpretation of the deputy leader of the Nazi Party, Rudolf Hess, after his arrival in Britain in 1941. PMID:19791314

Experimental Investigation on Corrosion of Cast Iron Pipes

Directory of Open Access Journals (Sweden)

H. Mohebbi

2011-01-01

Full Text Available It is well known that corrosion is the predominant mechanism for the deterioration of cast iron pipes, leading to the reduction of pipe capacity and ultimate collapse of the pipes. In order to assess the remaining service life of corroded cast iron pipes, it is imperative to understand the mechanisms of corrosion over a long term and to develop models for pipe deterioration. Although many studies have been carried out to determine the corrosion behavior of cast iron, little research has been undertaken to understand how cast iron pipes behave over a longer time scale than hours, days, or weeks. The present paper intends to fill the gap regarding the long-term corrosion behaviour of cast iron pipes in the absence of historical data. In this paper, a comprehensive experimental program is presented in which the corrosion behaviour of three exservice pipes was thoroughly examined in three simulated service environments. It has been found in the paper that localised corrosion is the primary form of corrosion of cast iron water pipes. It has also been found that the microstructure of cast irons is a key factor that affects the corrosion behaviour of cast iron pipes. The paper concludes that long-term tests on corrosion behaviour of cast iron pipes can help develop models for corrosion-induced deterioration of the pipes for use in predicting the remaining service life of the pipes.

Rough case-based reasoning system for continues casting

Science.gov (United States)

Su, Wenbin; Lei, Zhufeng

2018-04-01

The continuous casting occupies a pivotal position in the iron and steel industry. The rough set theory and the CBR (case based reasoning, CBR) were combined in the research and implementation for the quality assurance of continuous casting billet to improve the efficiency and accuracy in determining the processing parameters. According to the continuous casting case, the object-oriented method was applied to express the continuous casting cases. The weights of the attributes were calculated by the algorithm which was based on the rough set theory and the retrieval mechanism for the continuous casting cases was designed. Some cases were adopted to test the retrieval mechanism, by analyzing the results, the law of the influence of the retrieval attributes on determining the processing parameters was revealed. A comprehensive evaluation model was established by using the attribute recognition theory. According to the features of the defects, different methods were adopted to describe the quality condition of the continuous casting billet. By using the system, the knowledge was not only inherited but also applied to adjust the processing parameters through the case based reasoning method as to assure the quality of the continuous casting and improve the intelligent level of the continuous casting.

Method and mold for casting thin metal objects

Science.gov (United States)

Pehrson, Brandon P; Moore, Alan F

2014-04-29

Provided herein are various embodiments of systems for casting thin metal plates and sheets. Typical embodiments include layers of mold cavities that are oriented vertically for casting the metal plates. In some embodiments, the mold cavities include a beveled edge such that the plates that are cast have a beveled edge. In some embodiments, the mold cavities are filled with a molten metal through an open horizontal edge of the cavity. In some embodiments, the mold cavities are filled through one or more vertical feed orifices. Further disclosed are methods for forming a thin cast metal plate or sheet where the thickness of the cast part is in a range from 0.005 inches to 0.2 inches, and the surface area of the cast part is in a range from 16 square inches to 144 square inches.

Notes of a Racial Caste Baby. Color Blindness and the End of Affirmative Action. Critical America Series.

Science.gov (United States)

Fair, Bryan K.

This book is a defense of remedial affirmative action and an assertion that it is a policy that is a fair and workable solution to the chronic problem of racial caste in the United States. The personal narrative of the author, eighth of 10 children born to a single mother on public assistance, is combined with the discussion of American history…

Caste in 21st Century India: Competing Narratives.

Science.gov (United States)

Desai, Sonalde; Dubey, Amaresh

2012-03-12

Recent debates regarding inclusion of caste in 2011 Census have raised questions about whether caste still matters in modern India. Ethnographic studies of the mid-20th century identified a variety of dimensions along which caste differentiation occurs. At the same time, whether this differentiation translates into hierarchy remains a contentious issue as does the persistence of caste, given the economic changes of the past two decades. Using data from a nationally representative survey of 41,554 households conducted in 2005, this paper examines the relationship between social background and different dimensions of well-being. The results suggest continued persistence of caste disparities in education, income and social networks.

Thickness control and interface quality as functions of slurry formulation and casting speed in side-by-side tape casting

DEFF Research Database (Denmark)

Bulatova, Regina; Jabbari, Mirmasoud; Kaiser, Andreas

2014-01-01

A novel method of co-casting called side-by-side tape casting was developed aiming to form thin functionally graded films with varying properties within a single plane. The standard organic-based recipe was optimized to co-cast slurries into thick graded tapes. Performed numerical simulations...... identified the stable flow beneath the blade with a shear rate profile independent of slurry viscosity as long as the slurry load in the casting tank was low. Thickness and interface shape could be well predicted if the rheological behaviour of slurries is known and the processing parameters are well...

Education and Caste in India

Science.gov (United States)

Chauhan, Chandra Pal Singh

2008-01-01

This paper analyses the policy of reservation for lower castes in India. This policy is similar to that of affirmative action in the United States. The paper provides a brief overview of the caste system and discusses the types of groups that are eligible for reservation, based on data from government reports. The stance of this paper is that…

Casting materials and their application in research and teaching.

Science.gov (United States)

Haenssgen, Kati; Makanya, Andrew N; Djonov, Valentin

2014-04-01

From a biological point of view, casting refers to filling of anatomical and/or pathological spaces with extraneous material that reproduces a three-dimensional replica of the space. Casting may be accompanied by additional procedures such as corrosion, in which the soft tissue is digested out, leaving a clean cast, or the material may be mixed with radiopaque substances to allow x-ray photography or micro computed topography (µCT) scanning. Alternatively, clearing of the surrounding soft tissue increases transparency and allows visualization of the casted cavities. Combination of casting with tissue fixation allows anatomical dissection and didactic surgical procedures on the tissue. Casting materials fall into three categories namely, aqueous substances (India ink, Prussian blue ink), pliable materials (gelatins, latex, and silicone rubber), or hard materials (methyl methacrylates, polyurethanes, polyesters, and epoxy resins). Casting has proved invaluable in both teaching and research and many phenomenal biological processes have been discovered through casting. The choice of a particular material depends inter alia on the targeted use and the intended subsequent investigative procedures, such as dissection, microscopy, or µCT. The casting material needs to be pliable where anatomical and surgical manipulations are intended, and capillary-passable for ultrastructural investigations.

Reengineering of Permanent Mould Casting with Lean Manufacturing Methods

Directory of Open Access Journals (Sweden)

R. Władysiak

2007-07-01

Full Text Available At the work were introduced main areas of production system project of casts produced in permanent moulds, that constitutes reengineering of conventional production system according to Lean Manufacturing (LM methods. New resolution of cooling of dies with water mist was shown to casting of car wheels made from aluminium alloys in low pressure casting process. It was implemented as a part of goal-oriented project in R.H. Alurad Sp.z o.o. in Gorzyce. Its using intensifies solidification and self-cooling of casts shortening the time of casting cycle by the 30%. It was described reorganizing casting stations into multi-machines cells production and the process of their fast tool’s exchange with applying the SMED method. A project of the system was described controlling the production of the foundry with the computer aided light Kanban system. A visualization of the process was shown the production of casts with use the value stream mapping method. They proved that applying casting new method in the technology and LM methods allowed to eliminate down-times, to reduce the level of stocks, to increase the productivity and the flow of the castings production.

Quality improvement of steel cast-welded constructions

Directory of Open Access Journals (Sweden)

Аркадій Васильович Лоза

2017-06-01

Full Text Available Among the various types of metallurgical equipment there are structures which are welded compounds of a cast base and additional elements produced by casting or any other means. Such structures are called cast-welded constructions. Besides new working properties such constructions appear to be more efficient and provide better durability as compared to the similar structures produced by other industrial means. Meanwhile the advantages of the technology are not used in full. One reason is low quality of the compound products caused by lack of proper preparation of the elements to be welded and poor quality of the welds themselves. In the article the methods of quality production and the maintenance of steel cast-welded constructions have been considered. A ladle of a blast-furnace slag car is used as the subject of investigation and further testing of the mentioned above technologies. The ladle is a cast product. Under operating conditions, the ladle undergoes mechanical and thermal load, which results in deformation of its sides that deflect inside. To prevent the deflection stiffening ribs are welded onto the outer surface of the ladle. However, there may be casting defects in the base metal that could reduce the durability of the welds. It has been proved that welds on the unprepared cast base of the steel product cannot guarantee the combination’s durability and reliability. To prevent the influence of the casting defects it has been recommended to cover the base metal with one more metal layer before welding the elements on. Two-layer surfacing provides best result as the first layer serves for the weld penetration of the casting defects since this layer has a significant share of base metal therefore it is less malleable; the second layer is necessary for making the layer viscous enough. The viscous layer ensures the absence of sharp transition from the deposited metal to the base metal and increases the crack resistance of the weld. In

Cast iron repair method of stitching pin

International Nuclear Information System (INIS)

Yun, In Sik; Yu, Yeong Chul; Kim, Steve S.; Reed, Gary J.

2003-01-01

Many cast iron parts are welded and suffer from improper pre-heating and poor welding skills which destroy the castings due to new cracks, deformations etc. This is due mainly to the lack of understanding of the properties of cast iron. Welding, however impractical, was the only alternative for many years. Locks are used to add strength across a crack. Special drilling jigs are used to create a precise hole pattern that locks are driven into. Our locks have a unique ability to pull the sides of a crack together. Bottom locks are stacked or laminated to a depth of 80% of the casting thickness. Thicker surface locks finish off lock installation, allowing repairs in irregular shapes and contours. Installing products can be done quickly with pneumatic tools. Up to one inch of repair can be done in 5 minutes in 1/4 inch thick cast iron.

Standard digital reference images for titanium castings

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 The digital reference images provided in the adjunct to this standard illustrate various types and degrees of discontinuities occurring in titanium castings. Use of this standard for the specification or grading of castings requires procurement of the adjunct digital reference images, which illustrate the discontinuity types and severity levels. They are intended to provide the following: 1.1.1 A guide enabling recognition of titanium casting discontinuities and their differentiation both as to type and degree through digital radiographic examination. 1.1.2 Example digital radiographic illustrations of discontinuities and a nomenclature for reference in acceptance standards, specifications and drawings. 1.2 The digital reference images consist of seventeen digital files each illustrating eight grades of increasing severity. The files illustrate seven common discontinuity types representing casting sections up to 1-in. (25.4-mm). 1.3 The reference radiographs were developed for casting sections up to 1...

Accuracy of stereolithography additive casts used in a digital workflow

DEFF Research Database (Denmark)

Al-Imam, Hiba; Gram, Mia; Benetti, Ana R

2018-01-01

additive (SLA) casts from 2 manufacturers: 9 Dreve SLA casts and 9 Scanbiz SLA casts. All casts were then scanned 9 times with an extraoral scanner to produce the reference data set. Trueness was evaluated by superimposing the data sets obtained by scanning the casts with the reference data set. Precision...

To what extent were ideas and beliefs about eugenics held in Nazi Germany shared in Britain and the United States prior to the second world war?

Science.gov (United States)

Wittmann, Emily

2004-06-01

The term eugenics was first coined by Darwin's cousin, Francis Galton, in 1883. The eugenic movement gained public popularity across Europe and North America at the end of the Victorian era, fuelled by the concept of 'social Darwinism' and public fear of a decline in the number of ideal citizens. The origins of eugenic legislation can be found in the USA's immigration acts of the early 1880's. Indiana was the first state to pass sterilisation laws, in 1907. The laws that followed were used as templates by the Nazis, thirty years later. In Britain the Wood Committee (1924) and the Brock Committee (1931) both put pressure on parliament to introduce eugenic laws but were defeated. The anti-eugenics movement was stronger than in other protestant European countries and eugenics fell out of favour as the 1930's progressed. In the USA however, support remained strong, leading one activist to comment in 1934, 'The Germans are beating us at our own game'. There appears to have been little emphasis on eugenics in the Weimar Parliament, but the Nazi's legislation, on coming to power in 1933, surpassed anything conceived on either side of the Atlantic at the outbreak of war in 1939.

Spall behavior of cast iron with varying microstructures

International Nuclear Information System (INIS)

Plume, Gifford; Rousseau, Carl-Ernst

2014-01-01

The spall strength of cast iron with varying microstructures has been investigated using plate impact at moderate speed. Stress history measurements were made with manganin stress gauges embedded between the back face of the specimen and a low impedance polycarbonate backing. Five separate cast irons were tested. Four of these consisted of gray cast iron with graphite in flake form, with three classified as Type VII A2 and the fourth containing a bimodal distribution of Types VII A4 and VII D8. The fifth casting consisted of ductile cast iron with graphite in nodular form, classified as Type I, size class 5. The spall strength for the Type VII A2 gray cast irons varied between 40 and 370 MPa, and that of the additional gray cast iron, between 410 and 490 MPa. The spall strength of the ductile cast iron fell within the range of 0.94–1.2 GPa. It is shown that the spall strength is linked to the damage level at the spall plane, where an increased level of tensile stress is required to generate higher levels of damage. Post mortem analysis was performed on the recovered samples, revealing the graphite phase to be the primary factor governing the spall fracture of cast irons, where crack nucleation is directly correlated to the debonding of graphite from the metal matrix. The average length of graphite found within a casting is linked to the material's strength, where strength increases as a function of decreasing length. The morphology and mean free path of graphite precipitates further govern the subsequent coalescence of initiated cracks to form a complete fracture plane. In cases where graphite spacing is large, increased energy level is required to complete the fracture process. A secondary factor governing the spall fracture of cast irons has also been linked to the microstructure of the metal matrix, with pearlite yielding higher spall strengths than free ferrite.

Spall behavior of cast iron with varying microstructures

Energy Technology Data Exchange (ETDEWEB)

Plume, Gifford; Rousseau, Carl-Ernst, E-mail: rousseau@uri.edu [Mechanical Engineering, University of Rhode Island, 92 Upper College Rd., Kingston, Rhode Island 02881 (United States)

2014-07-21

The spall strength of cast iron with varying microstructures has been investigated using plate impact at moderate speed. Stress history measurements were made with manganin stress gauges embedded between the back face of the specimen and a low impedance polycarbonate backing. Five separate cast irons were tested. Four of these consisted of gray cast iron with graphite in flake form, with three classified as Type VII A2 and the fourth containing a bimodal distribution of Types VII A4 and VII D8. The fifth casting consisted of ductile cast iron with graphite in nodular form, classified as Type I, size class 5. The spall strength for the Type VII A2 gray cast irons varied between 40 and 370 MPa, and that of the additional gray cast iron, between 410 and 490 MPa. The spall strength of the ductile cast iron fell within the range of 0.94–1.2 GPa. It is shown that the spall strength is linked to the damage level at the spall plane, where an increased level of tensile stress is required to generate higher levels of damage. Post mortem analysis was performed on the recovered samples, revealing the graphite phase to be the primary factor governing the spall fracture of cast irons, where crack nucleation is directly correlated to the debonding of graphite from the metal matrix. The average length of graphite found within a casting is linked to the material's strength, where strength increases as a function of decreasing length. The morphology and mean free path of graphite precipitates further govern the subsequent coalescence of initiated cracks to form a complete fracture plane. In cases where graphite spacing is large, increased energy level is required to complete the fracture process. A secondary factor governing the spall fracture of cast irons has also been linked to the microstructure of the metal matrix, with pearlite yielding higher spall strengths than free ferrite.

Cast Care: Do's and Don'ts

Science.gov (United States)

... al. Cast care. In: Instructions for Sports Medicine Patients. 2nd ed. Philadelphia, Pa.: Saunders Elsevier; 2012. https://www.clinicalkey.com. Accessed Jan. 25, 2018. Pfenninger JL, et al. Casts immobilization and upper extremity splinting. In: Pfenninger and Fowler's ...

Estimation of integrity of cast-iron cask against impact due to free drop test, (1)

International Nuclear Information System (INIS)

Itoh, Chihiro

1988-01-01

Ductile cast iron is examined to use for shipping and storage cask from a economic point of view. However, ductile cast iron is considered to be a brittle material in general. Therefore, it is very important to estimate the integrity of cast iron cask against brittle failure due to impact load at 9 m drop test and 1 m derop test on to pin. So, the F.E.M. analysis which takes nonlinearity of materials into account and the estimation against brittle failure by the method which is proposed in this report were carried out. From the analysis, it is made clear that critical flaw depth (the minimum depth to initiate the brittle failure) is 21.1 mm and 13.1 mm in the case of 9 m drop test and 1 m drop test on to pin respectively. These flaw depth can be detected by ultrasonic test. Then, the cask is assured against brittle failure due to impact load at 9 m drop test and 1 m drop test on to pin. (author)

Structure Distribution in Precise Cast Iron Moulded on Meltable Model

Directory of Open Access Journals (Sweden)

Skrbek B.

2015-12-01

Full Text Available Topic of this work is to compare metalurgy of cast irons poured into sand moulds and into shell molds at IEG Jihlava company and from it following differencies in structures of thin- and thick-walled castings. This work is dealing with investigation and experimental measurement on surfaces and sections suitable thin- and thick-walled investment castings at IEG Jihlava. Cast irons with flake graphite (grey cast iron and cast irons with spheroidal graphite (ductile cast iron. Both mechanical and physical properties are determined using calculations from as measured values of wall thicknesses L and Lu, Vickers hardness and remanent magnetism. Measurement results are discussed, findings are formulated and methods for castings metallurgical quality improvement are recommended finally.

Metallic Fuel Casting Development and Parameter Optimization Simulations

International Nuclear Information System (INIS)

Fielding, Randall S.; Kennedy, J.R.; Crapps, J.; Unal, C.

2013-01-01

Conclusions: • Gravity casting is a feasible process for casting of metallic fuels: – May not be as robust as CGIC, more parameter dependent to find right “sweet spot” for high quality castings; – Fluid flow is very important and is affected by mold design, vent size, super heat, etc.; – Pressure differential assist was found to be detrimental. • Simulation found that vent location was important to allow adequate filling of mold; • Surface tension plays an important role in determining casting quality; • Casting and simulations high light the need for better characterized fluid physical and thermal properties; • Results from simulations will be incorporated in GACS design such as vent location and physical property characterization

Plane-Casting: 3D Cursor Control with a SmartPhone

OpenAIRE

Katzakis, Nicholas; Kiyokawa, Kiyoshi; Hori, Masahiro; Takemura, Haruo

2018-01-01

We present Plane-Casting, a novel technique for 3D object manipulation from a distance that is especially suitable for smartphones. We describe two variations of Plane-Casting, Pivot and Free Plane-Casting, and present results from a pilot study. Results suggest that Pivot Plane-Casting is more suitable for quick, coarse movements whereas Free Plane-Casting is more suited to slower, precise motion. In a 3D movement task, Pivot Plane-Casting performed better quantitatively, but subjects prefer...

Total contact cast for neuropathic diabetic foot ulcers

International Nuclear Information System (INIS)

Ali, R.; Yaqoob, M.Y.

2008-01-01

To determine the outcome of diabetic neuropathic foot ulcers treated with Total Contact Cast (TCC) in terms of percentage of ulcers healed and time to heal. The study included diabetic patients with non-ischemic neuropathic foot ulcers of upto grade 2 of Wagner's classification. Ulcers were debrided off necrotic tissues and Total Contact Cast (TCC) was applied. TCC was renewed every 2 weeks till healing. Cases were labeled as cast failure when there was no reduction in wound size in 4 consecutive weeks or worsening to a higher grade. Main outcome measures were the percentage of ulcers healed and time to heal in the cast. Thirty four (87.17%) patients were males and 5(12.82%) were females. The mean age was 62 +- 13.05 years. All patients had NIDDM. Out of the 52 ulcers, 41(78.84%) healed with TCC in an average 2 casts duration (mean 32 days). There were 11(21.15%) cast failure. Majority (63.63%) of cast failure ulcers were located on pressure bearing area of heel. Most (90%) of the ulcers on forefoot and midsole region healed with TCC (p<0.001). Longer ulcer duration (mean 57.45 +- 29.64 days) significantly reduced ulcer healing (p<0.001). Total contact cast was an effective treatment modality for neuropathic diabetic foot ulcers of Wagner's grade 2, located on forefoot and midsole region. (author)

Microstructure analysis of cofebsinb metallic glasses with a various geometry prepared by planar flow casting and suction casting methods

International Nuclear Information System (INIS)

Hosko, J.; Janotova, J.; Svec, P.; Matko, I.; Janickovic, D.; Svec, P. Sr.

2012-01-01

In this paper we have studied the structure of as-cast Co_4_7Fe_2_0_._9B_2_1_._2Si_4_._6Nb_6_._3 ribbon, bilayer and bulk samples in form of rods up to 5 mm diameter. Amorphous structure of the ribbons and bilayer prepared by PFC was confirmed by XRD characterization. XRD analysis of the bulk sample with 5 mm diameter indicated the presence of crystalline phases. However, XRD analysis of the bulk sample with 4 mm diameter indicated no significant crystalline peaks. From TEM analysis it was found that in-situ BMG composite was obtained in bulk sample. The edge of bulk sample with 4 mm diameter was fully amorphous, however, the center of this sample contains crystalline particles of micron sizes dispersed in the amorphous matrix. Our results suggest that the system Co_4_7Fe_2_0_._9B_2_1_._2Si_4_._6Nb_6_._3 has high GFA because we have prepared various amorphous materials with different shape and thickness using the techniques of suction casting, modified PFC and PFC. The critical diameter of bulk samples with chemical composition Co_4_7Fe_2_0_._9B_2_1_._2Si_4_._6Nb_6_._3 for emergence amorphous phase is 4 mm. (authors)

NWIS Measurements for uranium metal annular castings

International Nuclear Information System (INIS)

Mattingly, J.K.; Valentine, T.E.; Mihalczo, J.T.

1998-01-01

This report describes measurements performed with annular uranium metal castings of different enrichments to investigate the use of 252 Cf-source-driven noise analysis measurements as a means to quantify the amount of special nuclear material (SNM) in the casting. This work in FY 97 was sponsored by the Oak Ridge Y-12 Plant and the DOE Office of Technology Development Programs. Previous measurements and calculational studies have shown that many of the signatures obtained from the source-driven measurement are very sensitive to fissile mass. Measurements were performed to assess the applicability of this method to standard annular uranium metal castings at the Oak Ridge Y-12 plant under verification by the International Atomic Energy Agency (IAEA) using the Nuclear Weapons Identification System (NWIS) processor. Before the measurements with different enrichments, a limited study of source-detector-casting moderator configurations was performed to enhance the correlated information. These configurations consisted of a casting with no reflector and with various thicknesses of polyethylene reflectors up to 10.16 cm in 2.54 cm steps. The polyethylene moderator thickness of 7.62 cm was used for measurements with castings of different enrichments reported here. The sensitivity of the measured parameters to fissile mass was investigated using four castings each with a different enrichment. The high sensitivity of this measurement method to fissile mass and to other material and configurations provides some advantages over existing safeguards methods

The red atom. The help at USSR of German scientists between 1945 and 1961. how did USSR recover the nazi uranium; L'atome rouge. L'aide a l'Urss des savants allemands entre 1945 et 1961. Comment l'Urss a recupere l'uranium nazi

Energy Technology Data Exchange (ETDEWEB)

Andurand, R

2009-07-15

In the previous chapters was exposed the saga of German scientists that worked for Soviet scientists from 1945 to 1961 and allowed these ones to make up for the delay in a record time they had on the American people. However, without the help of German scientists, that were at exceptional level they would succeed regardless but they would take the same time than the others ones to reach the same result. To be complete, one should, in this fourth chapter, precise how the Soviet people succeeded to recover the uranium from the nazi nuclear programme. (N.C.)

The structure of high-quality aluminium cast iron

Directory of Open Access Journals (Sweden)

D. Kopyciński

2012-01-01

Full Text Available In this study presents the analyse of aluminium iron cast structure (as-cast condition which are used in high temperature. While producing the casts of aluminium iron major influence has been preserve the structure of technological process parameters. The addition to Fe-C-Al alloy V, Ti, Cr leads to the improvement of functional and mechanical cast qualities. In this study, a method was investigated to eliminate the presence of undesirable Al4C3 phases in a aluminium cast iron structure and thus improve the production process. V and Ti additions in aluminium cast iron allows to development of FeAl - VC or TiC alloys. In particular, V or Ti contents above 5 wt.% were found to totally eliminate the presence of Al4C3. In addition, preliminary work indicates that the alloy with the FeAl - VC or TiC structure reveals high oxidation resistance. The introduction of 5 wt.% chromium to aluminium cast iron strengthened Al4C3 precipitate. Thus, the resultant alloy can be considered an intermetallic FeAl matrix strengthened by VC and TiC or modified Al4C3 reinforcements.

Fluid flow and heat transfer modeling for castings

International Nuclear Information System (INIS)

Domanus, H.M.; Liu, Y.Y.; Sha, W.T.

1986-01-01

Casting is fundamental to manufacturing of many types of equipment and products. Although casting is a very old technology that has been in existence for hundreds of years, it remains a highly empirical technology, and production of new castings requires an expensive and time-consuming trial-and-error approach. In recent years, mathematical modeling of casting has received increasing attention; however, a majority of the modeling work has been in the area of heat transfer and solidification. Very little work has been done in modeling fluid flow of the liquid melt. This paper presents a model of fluid flow coupled with heat transfer of a liquid melt for casting processes. The model to be described in this paper is an extension of the COMMIX code and is capable of handling castings with any shape, size, and material. A feature of this model is the ability to track the liquid/gas interface and liquid/solid interface. The flow of liquid melt through the sprue and runners and into the mold cavity is calculated as well as three-dimensional temperature and velocity distributions of the liquid melt throughout the casting process. 14 refs., 13 figs

Fractomechanical Properties of As-Cast and Austempered SG Cast Iron Between -40 °C and +20 °C

Directory of Open Access Journals (Sweden)

V.E. Fierro

2002-06-01

Full Text Available The spheroidal graphite (SG cast iron fractomechanical response varies with the test temperature and with the microstructure parameters. In the present paper, we analyze this variation performing fractomechanical tests in a temperature range from -40°C to +20°C, doing also Charpy and tensile tests for material characterization. The tests were carried out on as-cast samples and heat treated samples to obtain an ADI grade 1. In both cases, we studied samples taken from two well differentiated "Y" block sizes. The results obtained show that, for the chemical composition analyzed, both castings have a fractomechanical response decrease as the temperature diminishes. Besides, the block size enlargement produce a deterioration of the mechanical properties (the fracture toughness, mainly, for both castings.

CAST Physics Proposal to SPSC

CERN Document Server

CAST, Collaboration

2011-01-01

The CAST experiment has the potential to search for solar axions (dark matter particle candidates) or other particles with similar coupling. E.g., paraphtons (Hidden Sector), chameleons (dark energy), while considering the possibility whether CAST could be transformed to an antenna for relic axions with rest mass up to 0.1 to 1meV. While axion searches suggest detectors with lower background, paraphoton and chameleon searches require detectors with sub-keV threshold energy and the use of transparent windows in front of the Micromegas detectors, which cover 3 out of the 4 CAST magnet exits. Ongoing theoretical estimates and experimental investigations will define the priorities of the suggested 4 physics items of this proposal for the period 2012-2014.

Cast Metals Coalition Technology Transfer and Program Management Final Report

Energy Technology Data Exchange (ETDEWEB)

Gwyn, Mike

2009-03-31

The Cast Metals Coalition (CMC) partnership program was funded to ensure that the results of the Department of Energy's (DOE) metalcasting research and development (R&D) projects are successfully deployed into industry. Specifically, the CMC program coordinated the transfer and deployment of energy saving technologies and process improvements developed under separately funded DOE programs and projects into industry. The transition of these technologies and process improvements is a critical step in the path to realizing actual energy savings. At full deployment, DOE funded metalcasting R&D results are projected to save 55% of the energy used by the industry in 1998. This closely aligns with DOE's current goal of driving a 25% reduction in industrial energy intensity by 2017. In addition to benefiting DOE, these energy savings provide metalcasters with a significant economic advantage. Deployment of already completed R&D project results and those still underway is estimated to return over 500% of the original DOE and industry investment. Energy savings estimates through December 2008 from the Energy-Saving Melting and Revert Reduction Technology (E-SMARRT) portfolio of projects alone are 12 x 1012 BTUs, with a projection of over 50 x 1012 BTUs ten years after program completion. These energy savings and process improvements have been made possible through the unique collaborative structure of the CMC partnership. The CMC team consists of DOE's Office of Industrial Technology, the three leading metalcasting technical societies in the U.S: the American Foundry Society; the North American Die Casting Association; and the Steel Founders Society of America; and the Advanced Technology Institute (ATI), a recognized leader in distributed technology management. CMC provides collaborative leadership to a complex industry composed of approximately 2,100 companies, 80% of which employ less than 100 people, and only 4% of which employ more than 250 people

INDIAN CASTE SYSTEM: HISTORICAL AND PSYCHOANALYTIC VIEWS.

Science.gov (United States)

Vallabhaneni, Madhusudana Rao

2015-12-01

This paper elucidates the historical origins and transformations of India's caste system. Surveying the complex developments over many centuries, it points out that three positions have been taken in this regard. One suggests that the caste one is born into can be transcended within one's lifetime by performing good deeds. The other declares caste to be immutable forever. And, the third says that one can be reborn into a higher caste if one lives a virtuous life. Moving on to the sociopolitical realm, the paper notes how these positions have been used and exploited. The paper then attempts to anchor the existence and purpose of the Hindu caste system in Freud's ideas about group psychology and Klein's proposals of splitting and projective identification. The paper also deploys the large group psychology concepts of Volkan and the culturally nuanced psychoanalytic anthropology of Roland and Kakar. It concludes with delineating some ameliorative strategies for this tragic problem in the otherwise robust democratic society of India.

Colour Metallography of Cast Iron - Chapter 1: Introduction (Ⅰ

Directory of Open Access Journals (Sweden)

Zhou Jiyang

2009-02-01

Full Text Available Cast iron, as a traditional metal material, has advantages of low total cost, good castability and machinability, good wear resistance and low notch sensitivity, and is still facing tough challenge in quality, property and variety of types etc. Experts and engineers studying and producing iron castings all around world extremely concern this serious challenge. Over more than 30 years, a great of research work has been carried out on how to further improve its property, expand its application and combine cast iron technology with some hi-techs (for example, computer technology. Nevertheless, cast iron is a multi-element and multi-phase alloy and has complex and variety of structures and still has great development potential in structure and property. For further studying and developing cast iron, theoretical research work is important promise, and the study on solidification process and control mechanism of graphite morphology is fundamental for improving property of cast iron and developing new type of cast iron. Metallography of cast iron normally includes two sections: liquid phase transformation and solid phase transformation. The book, Colour Metallography of Cast Iron, uses colour metallography technique to study solidification structures of cast irons: graphite, carbides, austenite and eutectics; and focuses on solidification processes. With progress of modern solidification theory, the control of material solidification process becomes important measure for improving traditional materials and developing new materials. Solidification structure not only influences mechanical and physical properties of cast iron, but also affects its internal quality. The book uses a large amount of colour photos to describe the formation of solidification structures and their relations. Crystallization phenomena, which cannot be displayed with traditional metallography, are presented and more phase transformation information is obtained from these colour

An examination of gender bias on the eighth-grade MEAP science test as it relates to the Hunter Gatherer Theory of Spatial Sex Differences

Science.gov (United States)

Armstrong-Hall, Judy Gail

The purpose of this study was to apply the Hunter-Gatherer Theory of sex spatial skills to responses to individual questions by eighth grade students on the Science component of the Michigan Educational Assessment Program (MEAP) to determine if sex bias was inherent in the test. The Hunter-Gatherer Theory on Spatial Sex Differences, an original theory, that suggested a spatial dimorphism concept with female spatial skill of pattern recall of unconnected items and male spatial skills requiring mental movement. This is the first attempt to apply the Hunter-Gatherer Theory on Spatial Sex Differences to a standardized test. An overall hypothesis suggested that the Hunter-Gatherer Theory of Spatial Sex Differences could predict that males would perform better on problems involving mental movement and females would do better on problems involving the pattern recall of unconnected items. Responses to questions on the 1994-95 MEAP requiring the use of male spatial skills and female spatial skills were analyzed for 5,155 eighth grade students. A panel composed of five educators and a theory developer determined which test items involved the use of male and female spatial skills. A MANOVA, using a random sample of 20% of the 5,155 students to compare male and female correct scores, was statistically significant, with males having higher scores on male spatial skills items and females having higher scores on female spatial skills items. Pearson product moment correlation analyses produced a positive correlation for both male and female performance on both types of spatial skills. The Hunter-Gatherer Theory of Spatial Sex Differences appears to be able to predict that males could perform better on the problems involving mental movement and females could perform better on problems involving the pattern recall of unconnected items. Recommendations for further research included: examination of male/female spatial skill differences at early elementary and high school levels to