WorldWideScience

Sample records for natural rubber system

  1. Nano-reinforcement of tire rubbers: silica-technology for natural rubber : exploring the infuence of non-rubber constituents on the natural rubber-silica system

    NARCIS (Netherlands)

    Sarkawi, S.S.

    2013-01-01

    Natural rubber is a renewable resource material with outstanding properties which offers significant advantages over its counterparts, the fossil-resource synthetic rubbers. In fact, a natural rubber tree is an efficient carbon dioxide sequester. Since natural rubber is a natural product, it is subj

  2. Electron linear accelerator system for natural rubber vulcanization

    Science.gov (United States)

    Rimjaem, S.; Kongmon, E.; Rhodes, M. W.; Saisut, J.; Thongbai, C.

    2017-09-01

    Development of an electron accelerator system, beam diagnostic instruments, an irradiation apparatus and electron beam processing methodology for natural rubber vulcanization is underway at the Plasma and Beam Physics Research Facility, Chiang Mai University, Thailand. The project is carried out with the aims to improve the qualities of natural rubber products. The system consists of a DC thermionic electron gun, 5-cell standing-wave radio-frequency (RF) linear accelerator (linac) with side-coupling cavities and an electron beam irradiation apparatus. This system is used to produce electron beams with an adjustable energy between 0.5 and 4 MeV and a pulse current of 10-100 mA at a pulse repetition rate of 20-400 Hz. An average absorbed dose between 160 and 640 Gy is expected to be archived for 4 MeV electron beam when the accelerator is operated at 400 Hz. The research activities focus firstly on assembling of the accelerator system, study on accelerator properties and electron beam dynamic simulations. The resonant frequency of the RF linac in π/2 operating mode is 2996.82 MHz for the operating temperature of 35 °C. The beam dynamic simulations were conducted by using the code ASTRA. Simulation results suggest that electron beams with an average energy of 4.002 MeV can be obtained when the linac accelerating gradient is 41.7 MV/m. The rms transverse beam size and normalized rms transverse emittance at the linac exit are 0.91 mm and 10.48 π mm·mrad, respectively. This information can then be used as the input data for Monte Carlo simulations to estimate the electron beam penetration depth and dose distribution in the natural rubber latex. The study results from this research will be used to define optimal conditions for natural rubber vulcanization with different electron beam energies and doses. This is very useful for development of future practical industrial accelerator units.

  3. Natural rubber: leather composites

    OpenAIRE

    K. Ravichandran; N. Natchimuthu

    2005-01-01

    Leather is a fibrous protein consisting of collagen in a three dimensionally crosslinked network. Chrome tanning of leather improves the appearance of leather but at the same time emits both solid and liquid chrome leather wastes. Scrap rubber recycling using untreated and neutralized leather fibrous particles in natural rubber has been studied. Vulcanization, mechanical, morphological and swelling properties of the natural rubber - scrap rubber composites containing neutralized leather have ...

  4. Mechanochemical modification of natural rubber

    Science.gov (United States)

    Mikhaylov, I. A.; Sukhareva, K. V.; Andriasyan, Yu. O.; Popov, A. A.; Vorontsov, N. V.

    2016-11-01

    Thermomechanochemical changes of SVR 3L natural rubber after the treatment in the internal rubber mixer in the self-heating mode were studied. The effect of the molecular mass and content of the gel fraction of natural rubber is shown. Properties of rubber compounds and vulcanized rubber are presented. Taking into account modern requirements, a new alternative technology of obtaining halogenated elastomers based on the solid-phase (mechanochemical) halide modification is created. New halogen-containing natural rubber produced by this technology proves themselves in the conditions of rubber production. New fluorinated natural rubber produced by this technology proves themselves in the conditions of rubber production.

  5. The Effect of Novel Binary Accelerator System on Properties of Vulcanized Natural Rubber

    Directory of Open Access Journals (Sweden)

    Moez Kamoun

    2009-01-01

    Full Text Available The mechanical properties, curing characteristics, and swelling behaviour of vulcanized natural rubber with a novel binary accelerator system are investigated. Results indicate that the mechanical properties were improved. Crosslinking density of vulcanized natural rubber was measured by equilibrium swelling method. As a result, the new binary accelerator was found to be able to improve both cure rate and crosslinking density. Using the numerical analysis of test interaction between binary accelerator and operational modelling of vulcanization-factors experiments, it can be concluded that the interaction (Cystine, N-cyclohexyl-2-benzothiazyl sulfenamide was significant and the optimum value of binary accelerator was suggested, respectively, at levels 0 and +1.

  6. Chemical modifications of liquid natural rubber

    Science.gov (United States)

    Azhar, Nur Hanis Adila; Rasid, Hamizah Md; Yusoff, Siti Fairus M.

    2016-11-01

    Liquid natural rubber (LNR) was synthesized via photosentisized degradation of natural rubber (NR). LNR was modified into epoxidized liquid natural rubber (LENR) and hydroxylated liquid natural rubber (LNR-OH) using Na2WO4/CH3COOH/H2O2 catalytic system. Chemical structures of LNR and modified LNRs were characterized using Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) and 1H Nuclear Magnetic Resonance (NMR) spectroscopies. Integration of 1H NMR was used to calculate the epoxy content (%) of LENR. 1H NMR detected the formation of LNR-OH after prolonged heating and increased of catalyst in oxidation reaction.

  7. 21 CFR 801.437 - User labeling for devices that contain natural rubber.

    Science.gov (United States)

    2010-04-01

    ... User labeling for devices that contain natural rubber. (a) Data in the Medical Device Reporting System..., natural rubber that contacts humans. The term “natural rubber” includes natural rubber latex, dry natural rubber, and synthetic latex or synthetic rubber that contains natural rubber in its......

  8. Nanolipoprotein particles comprising a natural rubber biosynthetic enzyme complex and related products, methods and systems

    Energy Technology Data Exchange (ETDEWEB)

    Hoeprich, Paul D.; Whalen, Maureen

    2016-04-05

    Provided herein are nanolipoprotein particles that comprise a biosynthetic enzyme more particularly an enzyme capable of catalyzing rubber or other rubbers polymerization, and related assemblies, devices, methods and systems.

  9. Natural rubber biosynthesis in plants: rubber transferase.

    Science.gov (United States)

    Cornish, Katrina; Xie, Wenshuang

    2012-01-01

    Rubber biosynthesis in plants is a fascinating biochemical system, which evolved at the dawn of the dicotyledoneae and is present in at least four of the dictolydonous superorders. Rubber biosynthesis is catalyzed by a membrane complex in a monolayer membrane envelope, requires two distinct substrates and a divalent cation cofactor, and produces a high-molecular-weight isoprenoid polymer. A solid understanding of this system underpins valuable papers in the literature. However, the published literature is rife with unreliable reports in which the investigators have fallen into traps created by the current incomplete understanding of the biochemistry of rubber synthesis. In this chapter, we attempt to guide both new and more established researchers around these pitfalls.

  10. Alternative sources of natural rubber

    NARCIS (Netherlands)

    Mooibroek, H.; Cornish, K.

    2000-01-01

    Rubber (cis-1,4-polyisoprene) is one of the most important polymers naturally produced by plants because it is a strategic raw material used in more than 40,000 products, including more than 400 medical devices. The sole commercial source, at present, is natural rubber harvested from the Brazilian r

  11. Development of a BR-UASB-DHS system for natural rubber processing wastewater treatment.

    Science.gov (United States)

    Watari, Takahiro; Thanh, Nguyen Thi; Tsuruoka, Natsumi; Tanikawa, Daisuke; Kuroda, Kyohei; Huong, Nguyen Lan; Tan, Nguyen Minh; Hai, Huynh Trung; Hatamoto, Masashi; Syutsubo, Kazuaki; Fukuda, Masao; Yamaguchi, Takashi

    2015-11-21

    Natural rubber processing wastewater contains high concentrations of organic compounds, nitrogen, and other contaminants. In this study, a treatment system composed of a baffled reactor (BR), an upflow anaerobic sludge blanket (UASB) reactor, and a downflow hanging sponge (DHS) reactor was used to treat natural rubber processing wastewater in Vietnam. The BR showed good total suspended solids removal of 47.6%, as well as acidification of wastewater. The UASB reactor achieved a high chemical oxygen demand (COD) removal efficiency of 92.7% ± 2.3% and energy recovery in the form of methane with an organic loading rate of 12.2 ± 6.6 kg-COD·m(-3)·day(-1). The DHS reactor showed a high performance in residual organic matter removal from UASB effluent. In total, the system achieved high-level total COD removal of 98.6% ± 1.2% and total suspended solids removal of 98.0% ± 1.4%. Massive parallel 16S rRNA gene sequencing of the retained sludge in the UASB reactor showed the predominant microbial phyla to be Bacteroidetes, Firmicutes, Proteobacteria, WWE1, and Euryarchaeota. Uncultured bacteria belonging to the phylum Bacteroidetes and Phylum WWE1 were predominant in the UASB reactor. This microbial assemblage utilizes the organic compounds contained in natural rubber processing wastewater. In addition, the methane-producing archaea Methanosaeta sp. and Methanolinea sp. were detected.

  12. Natural rubber latex allergy

    Directory of Open Access Journals (Sweden)

    Deval Ravi

    2008-01-01

    Full Text Available Natural rubber latex (NRL is a ubiquitous allergen as it is a component of > 40,000 products in everyday life. Latex allergy might be attributed to skin contact or inhalation of latex particles. Latex allergy is an IgE-mediated hypersensitivity to NRL, presenting a wide range of clinical symptoms such as angioedema, swelling, cough, asthma, and anaphylactic reactions. Until 1979, latex allergy appeared only as type IV delayed hypersensitivity; subsequently, the proportion of different allergy types drifted towards type IV contact allergy reactions. Several risk factors for sensitization to NRL are already known and well documented. Some authors have established a positive correlation between a history of multiple surgical interventions, atopy, spina bifida malformation, and latex allergy incidence. We suspect an increase in latex allergy incidence in association with increased atopy and sensitivity to environmental allergens in the industrial population. It is often postulated in literature that the groups of workers at risk for this allergy are essentially workers in the latex industry and healthcare professionals. In this population, direct internal and mucosal contact with NRL medical devices may be the route of sensitization as factors such as the number of procedures and use of NRL materials (catheters and tubes were associated with increased risk of latex sensitization and allergy.

  13. Hydrogenation of liquid natural rubber via diimide reduction in hydrazine hydrate/hydrogen peroxide system

    Energy Technology Data Exchange (ETDEWEB)

    Yusof, Muhammad Jefri Mohd; Jamaluddin, Naharullah; Abdullah, Ibrahim; Yusoff, Siti Fairus M. [School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia)

    2015-09-25

    Liquid natural rubber (LNR) with molecular weight of lower than 10{sup 5} and shorter polymeric chain than natural rubber was prepared. LNR was then hydrogenated via diimide reduction by oxidation of hydrazine hydrate with hydrogen peroxide. The unsaturated units of the rubber were converted into saturated hydrocarbon to strengthen the backbone of the polymer so it was able to resist thermal degradation. The results indicated that hydrogenation degree of the product (HLNR) could be extended to 91.2% conversion under appropriate conditions. The hydrogenated LNR (HLNR) was characterized using Fourier-Transform Infrared (FTIR) and Nuclear Magnetic Resonance (NMR) spectroscopy. The physical characteristics of HLNR were analyzed with Termogravimetric Analysis (TGA)

  14. The Integration of Cleaner Production Indicators on the Environmental Performance Measurement System for the Indonesian Natural Rubber Industry

    Directory of Open Access Journals (Sweden)

    Sawarni Hasibuan

    2013-01-01

    Full Text Available This study aims to identify the priority of the cleaner production implementation and integrate it in the design of a comprehensive environmental performance measurement system for natural rubber industry in Indonesia. Prioritizing the cleaner production on the production process of natural rubber is based on the case of 10 Indonesian crumb rubber companies using the Analytical Hierarchy Process. The comprehensive environmental performance measurement system in natural rubber industry, i.e. in crumb rubber industry, starts from the selection of key environmental performance indicators (KEPI using the fuzzy independent preference evaluation method. The environmental performance measurement model is developed to assist users in evaluating the comprehensive environmental performance and condition of the key indicators. The weighting for each of the KEPI is performed by means of the expert choice software. The environmental performance measurement model is designed in the form of a environmental scorecard with traffic light facilities which can provide recommendations based on the performance achievement status of each KEPI. From the results of the model verification in the case of crumb rubber industry, several indicator statuses were found "not good", i.e. on the index of raw materials, solid waste load, water conservation, energy conservation, and environmental innovation indicators. The environmental performance ranking model is designed to evaluate the comprehensive environmental performance in different companies or at different assessment periods.

  15. Natural rubber latex used as drug delivery system in guided bone regeneration (GBR

    Directory of Open Access Journals (Sweden)

    Rondinelli Donizetti Herculano

    2009-06-01

    Full Text Available In this work, we propose natural rubber latex (NRL membranes as a protein delivery system. For this purpose Bovine Serum Albumin (BSA was incorporated into the latex solution for in vitro protein delivery experiments. Different polymerization temperatures were used, from -10 to 27 °C, in order to control the membrane morphology. These membranes were characterized by Scanning Electron Microscopy (SEM, Atomic Force Microscopy (AFM, as well as the Lowry Method to measure the BSA release. SEM and AFM microscopy analysis showed that the number, size and distribution of pores in NRL membranes can be varied, as well as its overall morphology. We have found that the morphology of the membrane is the predominant factor for higher protein release, compared with pore size and number of pores. Results demonstrated that the best drug-delivery system was the membrane polymerized at RT (27 °C, which does release 66% of its BSA content for up to 18 days. Our results indicate that NRLb could be used in the future as an active membrane that could accelerate bone healing in GBR.

  16. Unraveling the Mystery of Natural Rubber Biosynthesis

    Science.gov (United States)

    Natural rubber (NR) is primarily obtained from Hevea brasiliensis, commonly known as the Brazilian rubber tree. As this species contains little genetic variation, it is susceptible to pathogen-based eradication. Consequently, it is imperative that a biomimetic pathway for NR production be developed....

  17. Thermal properties of hydrogenated liquid natural rubber

    Energy Technology Data Exchange (ETDEWEB)

    Jamaluddin, Naharullah; Abdullah, Ibrahim; Yusoff, Siti Fairus M. [School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia)

    2015-09-25

    Natural rubber (NR) was modified to form liquid natural rubber (LNR) via photooxidative degradation. Hydrogenated liquid natural rubber (HLNR) was synthesized by using diimide as source of hydrogen which the diimide is produced by thermolysis of p-toluenesulfonyl hydrazide (TSH). The structure of HLNR was characterized by determining the changes of main peaks in Fourier Transform infrared and nuclear magnetic resonance spectra after hydrogenation. Thermogravimetric analysis showed that the HLNR had higher decomposition temperature compared to LNR and the decomposition temperature is directly proportional to the percentage of conversion.

  18. [Detection of pentachlorophenol in natural rubber latex].

    Science.gov (United States)

    Jaworska, E

    1976-01-01

    The method of detection of pentachlorophenol in natural rubber latex is proposed. Pentachlorophenol is isolated from other nonrubber-like substances by thin-layer chromatography and identified by spectroscopic method in UV-light. Isolation of pentachlorophenol is carried out from water extracts obtained from the dry caoutchouc films, so the same method can be used for examination of the rubber articles designed for the medicinetoo.

  19. SUPPLY-CHAIN OF NATURAL RUBBER IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Bustanul Arifin

    2011-08-01

    Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 st1\\:*{behavior:url(#ieooui } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} The study examines the supply chain of natural rubber production in Indonesia and assessing the transmission of prices to rubber growers and provides recommendations for a suitable scheme that would help to ensure high production standards and a sustainable return for natural rubber production.  The frameworks to examine the performance of supply chain of rubber marketing rely mostly on the efficiency level of marketing system of natural rubbers, including the value chain principles in marketing margin, and revealed price transmission from consumers to growers. The results show that the roles of subdistrict middlemen are extremely crucial in moving up the slabs from the village level to urban areas, where trader-brokers are expecting the slabs to be forwarded directly to crumb-rubber factories.  Changes in world price, hence the profits being accumulated by traders and rubber factories, are not transmitted properly to rubber farmers and/or sharetappers. Information asymmetry, the access over price information, and immediate response of rubber growers to the change in world price could explain this non-cointegration in price data between growers and exporters.  In the near future, the policy reforms in supply chain of natural rubber marketing in Indonesia should carefully address these issues in a more comprehensive manner.  Finally, in order to contribute to the positive environmental and social benefits, the major challenge for natural rubber

  20. Preparation of sulfonic acid-containing rubbers from natural rubber vulcanizates

    Science.gov (United States)

    Poonsawat, Worapong; Poompradub, Sirilux; Ngamcharussrivichai, Chawalit

    2014-06-01

    In this work, a series of sulfonic acid-containing rubbers were prepared by aqueous phase oxidation of natural rubber vulcanizates in the presence of hydrogen peroxide (H2O2) and formic acid (HCOOH). The starting vulcanizates were neatly prepared via an efficient vulcanization (EV) system by varying mass ratio of N-cyclohexyl-2-benzothiazole sulfonamide (CBS), as an accelerator, to sulfur. The oxidation conditions were controlled at the molar ratio of H2O2: HCOOH = 1:1, the concentration of H2O2 = 15 wt.%, the temperature = 50 °C, and the reaction time = 3 h. The rubber materials before and after the oxidation were characterized for their physicochemical properties by using Fourier transform infrared spectroscopy, bomb calorimetry, acid-base titration and swelling measurements. The results indicated the presence of sulfonic acid group in the oxidized rubbers, generated by the oxidative cleaves of sulfide crosslinks in the rubber vulcanizates. The oxidation decreased the sulfur content of the rubber in which the level of sulfur loss was determined by the CBS/sulfur ratio. Moreover, the acidity of the oxidized products was correlated with the amount of sulfur remaining.

  1. Morphology, Tensile Strength and Oil Resistance of Gum Rubber Sheets Prepared from Lignin Modified Natural Rubber

    Directory of Open Access Journals (Sweden)

    Asrul M.

    2014-07-01

    Full Text Available The paper describes the preparation of lignin filled natural rubber latex composite and its subsequent use to obtain lignin modified rubber. Two types of lignin i.e.: rubber wood and commercial alkali lignin were used as rubber filler. Gum rubber sheets were prepared from the lignin modified rubber and their properties were compared to Standard Malaysian Rubber (SMR 20 and a type of rubber obtained from the coagulation of high ammonia latex. Rubber morphology was investigated using Scanning Electron Microscope on the cross-sectional area of cryo-fractured samples. Oil resistance of the rubber sheets was determined by measuring the mass change before and after ASTM IRM 903 oil immersion, while the tensile strengths were determined according to ASTM D412 standard. Low values of tensile strength obtained for the commercial alkali lignin modified rubber sheet relative to the rest of the rubber samples was attributed to poor lignin dispersion. This occurrence was substantiated by the SEM analysis of cryo-fractured samples where crazes and inhomogeneity was observed. Nonetheless, both lignin modified rubbers exhibited higher level of oil resistance compared to SMR 20. This is due to the nature of lignin as a hydrophilic component and its presence in the rubber matrix complicates the oil diffusion process into rubber.

  2. Curing characteristics of chlorosulphonated polyethylene and natural rubber blends

    OpenAIRE

    M. MARINOVIC-CINCOVIC; J. BUDINSKI SIMENDIC; Markovic, G.; Radovanovic, B.

    2005-01-01

    The dependence of the Mooney scorch time and cure index on the blend ratio of chlorosulphonated polyethylene/natural rubber (CSM/SMR 20 CV) and chlorosulphonated polyethylene/chlorinated natural rubber (CSM/Pergut S 40) blends were determined in the temperature range from 120 oC to 160 oC using a Monsanto Mooney viscometer. Semi-efficient vulcanization systems were used for the study. The morphology of the fracture surface of the crosslinked systems was determined by Scanning Electron Microsc...

  3. Establishment of new crops for the production of natural rubber.

    Science.gov (United States)

    van Beilen, Jan B; Poirier, Yves

    2007-11-01

    Natural rubber is a unique biopolymer of strategic importance that, in many of its most significant applications, cannot be replaced by synthetic alternatives. The rubber tree Hevea brasiliensis is the almost exclusive commercial source of natural rubber currently and alternative crops should be developed for several reasons, including: a disease risk to the rubber tree that could potentially decimate current production, a predicted shortage of natural rubber supply, increasing allergic reactions to rubber obtained from the Brazilian rubber tree and a general shift towards renewables. This review summarizes our knowledge of plants that can serve as alternative sources of natural rubber, of rubber biosynthesis and the scientific gaps that must be filled to bring the alternative crops into production.

  4. Impregnation of Natural Rubber into Rubber Wood: A Green Wood Composite

    OpenAIRE

    Wassa Ruayruay; Sureurg Khongtong

    2014-01-01

    A green wood composite material was developed from the two environmentally friendly substrates natural rubber (cis-1,4-polyisoprene) and rubber wood (Hevea brasiliensis). Natural rubber (NR) was introduced into rubber wood by pressurization of NR latex, followed by the removal of the aqueous phase to allow only dry NR to remain inside the wood structure. Scanning electron microscopy images and the weight increase of the dry impregnated samples revealed the retention of dry NR within the rubbe...

  5. The effect of coupling agents on silicate-based nanofillers/carbon black dual filler systems on the properties of a natural rubber/butadiene rubber compound

    NARCIS (Netherlands)

    Poikelispää, M.; Das, A.; Dierkes, W.K.; Vuorinen, J.

    2015-01-01

    Nanofillers have been introduced a few years ago, but their application in elastomers is still a challenge. With the existing rubber processing equipment and constraints of rubber mixing, dispersion of nanofillers is difficult. The processability and performance of compounds containing plate- or tub

  6. Reinforcement of graphene in natural rubber nanocomposite

    Science.gov (United States)

    Azira, A. A.; Kamal, M. M.; Rusop, M.

    2016-07-01

    In the present work, we report the use of graphene as multi-functional nanofiller for natural rubber (NR). Dispersion of reduced graphene into natural rubber (NR) was found to enhance the mechanical and electrical properties of NR. Through a facile approach rubber molecules are successfully grafted onto the surface of graphene. Stable graphene suspension with NR afforded a weblike morphology consisting of platelet networks between the rubber particles, while internal mixer processing broke down this structure, yielding a homogeneous and improved dispersion. The resulting graphene can be dispersed in NR via dry mixing. It is found that graphene is prominent in improving the mechanical properties of NR at low filler loading. The percolation point of graphene in the nanocomposites takes place at a content of less than 0.1 wt%. With incorporation of as low as 0.1 wt% of graphene, an increase in the tensile strength and improvement in the tensile modulus achieved. The improvement in the mechanical properties of NR nanocomposites at such low filler loading is attributed to the strong interfacial interaction and the molecular-level dispersion of graphene in the NR matrix. .

  7. Interface interactions of natural rubber and protein/fiber aggregates

    Science.gov (United States)

    Mechanical properties of natural rubber are improved with a renewable filler for rubber applications. Aggregates of protein and fiber that constitute soy protein concentrate were shear-reduced and used to enhance the tensile modulus of the natural rubber. The aqueous dispersion of the shear-reduced ...

  8. Production and characterization of natural rubber-Ca/P blends for biomedical purposes.

    Science.gov (United States)

    Nascimento, R M; Faita, F L; Agostini, D L S; Job, A E; Guimarães, F E G; Bechtold, I H

    2014-06-01

    This study presents the development of natural rubber-Ca/P blends, as promising candidates for biomedical purposes. The specific objective was the incorporation of Ca/P into a natural rubber polymeric matrix. Ca/P crystalline phases were synthesized by the sol-gel method and the polymeric matrices were produced using natural rubber extracted from latex of the Hevea brasiliensis. The shape and size of natural rubber particles present in the NR membrane, as well as, the way the Ca/P powder grains aggregate in the polymeric matrix were investigated, giving information about the interactions between the Ca/P and the natural rubber particles. Confocal fluorescence scanning microscopy measurements allowed us to propose a structure where the Ca/P grains are surrounded by natural rubber particles. This structure may mediate Ca(2+) release for tissue regeneration. The system investigated may open new horizons for development of a bandage which provides the controlled-release of biomaterials.

  9. Treatment of natural rubber processing wastewater using a combination system of a two-stage up-flow anaerobic sludge blanket and down-flow hanging sponge system.

    Science.gov (United States)

    Tanikawa, D; Syutsubo, K; Hatamoto, M; Fukuda, M; Takahashi, M; Choeisai, P K; Yamaguchi, T

    2016-01-01

    A pilot-scale experiment of natural rubber processing wastewater treatment was conducted using a combination system consisting of a two-stage up-flow anaerobic sludge blanket (UASB) and a down-flow hanging sponge (DHS) reactor for more than 10 months. The system achieved a chemical oxygen demand (COD) removal efficiency of 95.7% ± 1.3% at an organic loading rate of 0.8 kg COD/(m(3).d). Bacterial activity measurement of retained sludge from the UASB showed that sulfate-reducing bacteria (SRB), especially hydrogen-utilizing SRB, possessed high activity compared with methane-producing bacteria (MPB). Conversely, the acetate-utilizing activity of MPB was superior to SRB in the second stage of the reactor. The two-stage UASB-DHS system can reduce power consumption by 95% and excess sludge by 98%. In addition, it is possible to prevent emissions of greenhouse gases (GHG), such as methane, using this system. Furthermore, recovered methane from the two-stage UASB can completely cover the electricity needs for the operation of the two-stage UASB-DHS system, accounting for approximately 15% of the electricity used in the natural rubber manufacturing process.

  10. Guayule and Russian dandelion as alternative sources of natural rubber.

    Science.gov (United States)

    van Beilen, Jan B; Poirier, Yves

    2007-01-01

    Natural rubber, obtained almost exclusively from the Para rubber tree (Hevea brasiliensis), is a unique biopolymer of strategic importance that, in many of its most significant applications, cannot be replaced by synthetic rubber alternatives. Several pressing motives lead to the search for alternative sources of natural rubber. These include increased evidence of allergenic reactions to Hevea rubber, the danger that the fungal pathogen Microcyclus ulei, causative agent of South American Leaf Blight (SALB), might spread to Southeast Asia, which would severely disrupt rubber production, potential shortages of supply due to increasing demand and changes in land use, and a general trend towards the replacement of petroleum-derived chemicals with renewables. Two plant species have received considerable attention as potential alternative sources of natural rubber: the Mexican shrub Guayule (Parthenium argentatum Gray) and the Russian dandelion (Taraxacum koksaghyz). This review will summarize the current production methods and applications of natural rubber (dry rubber and latex), the threats to the production of natural rubber from the rubber tree, and describe the current knowledge of the production of natural rubber from guayule and Russian dandelion.

  11. Extraction and characterization of latex and natural rubber from rubber-bearing plants.

    Science.gov (United States)

    Buranov, Anvar U; Elmuradov, Burkhon J

    2010-01-27

    Consecutive extraction of latex and natural rubber from the roots of rubber-bearing plants such as Taraxacum kok-saghyz (TKS), Scorzonera tau-saghyz (STS), and Scorzonera Uzbekistanica (SU) were carried out. Latex extraction was carried via two methods: Blender method and Flow method. The results of latex extraction were compared. Cultivated rubber-bearing plants contained slightly higher latex contents compared to those from wild fields. Several creaming agents for latex extraction were compared. About 50% of total natural rubber was extracted as latex. The results of the comparative studies indicated that optimum latex extraction can be achieved with Flow method. The purity of latex extracted by Blender method ( approximately 75%) was significantly lower than that extracted by Flow method (99.5%). When the latex particles were stabilized with casein, the latex was concentrated significantly. Through concentrating latex by flotation, the latex concentration of 35% was obtained. Bagasse contained mostly solid natural rubber. The remaining natural rubber in the bagasse (left after the latex extraction) was extracted using sequential solvent extraction first with acetone and then with several nonpolar solvents. Solid natural rubber was analyzed for gel content and characterized by size exclusion chromatography (SEC) for molecular weight determinations. SEC of solid natural rubber has shown that the molecular weight is about 1.8E6 and they contain less gel compared to TSR20 (Grade 20 Technically Specified Rubber), a commercial natural rubber from Hevea brasiliensis.

  12. Natural rubber (NR) biosynthesis: perspectives from polymer chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Barkakaty, Balaka [ORNL

    2014-01-01

    Natural rubber is an important strategic raw material for manufacturing a wide variety of industrial products. There are at least 2,500 different latex-producing plant species; however, only Hevea brasiliensis (the Brazilian rubber tree) is a commercial source. The chemical structure of natural rubber is cis-1,4-polyisoprene, but the exact structure of the head and end groups remains unknown. Since synthetic cis-1,4-polyisoprenes cannot match the superior properties of natural rubber, understanding the chemistry behind the biosynthetic process is key to finding a possible replacement. T his chapter summarizes our current understandings from the perspective of a polymer scientist by comparing synthetic polyisoprenes to natural rubber. The chapter also highlights biomimetic polymerization, research towards a synthetic match of natural rubber and the role of natural rubber in health care.

  13. Isolation of Microorganisms Able To Metabolize Purified Natural Rubber

    OpenAIRE

    Heisey, R. M.; Papadatos, S

    1995-01-01

    Bacteria able to grow on purified natural rubber in the absence of other organic carbon sources were isolated from soil. Ten isolates reduced the weight of vulcanized rubber from latex gloves by >10% in 6 weeks. Scanning electron microscopy clearly revealed the ability of the microorganisms to colonize, penetrate, and dramatically alter the physical structure of the rubber. The rubber-metabolizing bacteria were identified on the basis of fatty acid profiles and cell wall characteristics. Seve...

  14. Microwave pre-heating of natural rubber using a rectangular wave guide (MODE: TE10

    Directory of Open Access Journals (Sweden)

    Doo-ngam, N.

    2007-11-01

    Full Text Available This paper presents an application of microwave radiation for pre-heating of natural rubbercompounding with various sulphur contents. The natural rubber-compounding was pre-heated by microwave radiation using a rectangular wave guide system (MODE: TE10 operating at frequency of 2.45 GHz in which the power can vary from 0 to 1500 W. In the present work, the influence of power input, sample thickness, and sulphur content were examined after applying microwave radiation to the rubber samples. Results are discussed regarding the thermal properties, 3-D network, dielectric properties and chemical structures. From the result, firstly, it was found that microwave radiation can be applied to pre-heating natural rubber-compounding before the vulcanization process. Secondly, microwave radiation was very useful for pre-heating natural rubber-compounding that has a thickness greater than 5mm. Thirdly, crosslinking in natural rubber-compounding may occurs after pre-heating by microwave radiation though Fourier Transform Infrared Spectroscopy(FTIR. Finally, there a little effect of sulphur content on temperature profiles after applying microwave radiation to the natural rubber-compounding. Moreover, natural rubber-compounding without carbon black showed a lower heat absorption compared with natural rubbercompounding filled carbon black. This is due to the difference in dielectric loss factor. This preliminary result will be useful information in terms of microwave radiation for pre-heating natural rubber-compounding and rubber processing in industry.

  15. Tensile Strength of PHBV/Natural Rubber Latex Mixtures

    OpenAIRE

    Promkotra Sarunya; Kangsadan Tawiwan

    2015-01-01

    A polyhydroxybutyrate-co-hydroxyvalerate (PHBV) is mingled with natural rubber latex (R) to develop its mechanical property of the blend. Normally, substantial effects of the PHBV are hard, fragile, and inelastic, whereas the natural rubber is represented itself as very high elastic matter. The mixtures between the PHBV and natural rubber latex (R) are considered in different proportions. The PHBV solutions (w/v) are defined suitability at 1% (P1), 2% (P2), and 3% (P3). Their liquid mixtures ...

  16. Micromorphological characterization and label-free quantitation of small rubber particle protein in natural rubber latex.

    Science.gov (United States)

    Wang, Sai; Liu, Jiahui; Wu, Yanxia; You, Yawen; He, Jingyi; Zhang, Jichuan; Zhang, Liqun; Dong, Yiyang

    2016-04-15

    Commercial natural rubber is traditionally supplied by Hevea brasiliensis, but now there is a big energy problem because of the limited resource and increasing demand. Intensive study of key rubber-related substances is urgently needed for further research of in vitro biosynthesis of natural rubber. Natural rubber is biosynthesized on the surface of rubber particles. A membrane protein called small rubber particle protein (SRPP) is a key protein associated closely with rubber biosynthesis; however, SRPP in different plants has been only qualitatively studied, and there are no quantitative reports so far. In this work, H. brasiliensis was chosen as a model plant. The microscopic distribution of SRPP on the rubber particles during the washing process was investigated by transmission electron microscopy-immunogold labeling. A label-free surface plasmon resonance (SPR) immunosensor was developed to quantify SRPP in H. brasiliensis for the first time. The immunosensor was then used to rapidly detect and analyze SRPP in dandelions and prickly lettuce latex samples. The label-free SPR immunosensor can be a desirable tool for rapid quantitation of the membrane protein SRPP, with excellent assay efficiency, high sensitivity, and high specificity. The method lays the foundation for further study of the functional relationship between SRPP and natural rubber content.

  17. Regulamentação pública e conduta das firmas no sistema agroindustrial da borracha natural entre 1997 e 2000 Regulation and behavior of firms in Brazil's natural rubber agro-industrial system between 1997-2000

    Directory of Open Access Journals (Sweden)

    Augusto Hauber Gamero

    2002-01-01

    Full Text Available A necessidade de regulamentação no sistema agroindustrial (SAG da borracha natural no Brasil é evidente. Desde a metade do século, quando o país passou a importar esse produto, vários esforços governamentais vêm sendo definidos, objetivando o desenvolvimento sustentável do setor da produção agrícola nacional de borracha. No ano de 1997, criou-se uma política de subvenção direta à produção. Dada a estrutura desse SAG, associada à conjuntura do mercado internacional e a uma regulamentação falha do governo federal, começaram a surgir indícios de abuso de poder de mercado pela indústria pneumática instalada no país, principal consumidora do produto. Utilizando o arcabouço teórico da organização industrial, neste artigo se procurou levantar evidências nesse sentido.The need for regulation of Brazil’s natural rubber agro-industrial system (SAG is evident. Since the middle of the 20th century, when the country began importing rubber, many governmental efforts have been made to promote the sustainable development of Brazil’s natural rubber productive sector. In 1997, the Brazilian government created a direct subvention policy to assist rubber producers. Given the structure of Brazil’s SAG, the international rubber market, and imperfect regulation by the Federal Government, it would not be unexpected to find signs that Brazil’s largest natural rubber consumer, the domestic tire industry, has begun to abusively exercise its market power. Using the theoretical structure of Industrial Organization, this paper tries to show evidences of this abuse.

  18. Structural characterization of rubber from jackfruit and euphorbia as a model of natural rubber.

    Science.gov (United States)

    Mekkriengkrai, Dararat; Ute, Koiichi; Swiezewska, Ewa; Chojnacki, Tadeusz; Tanaka, Yasuyuki; Sakdapipanich, Jitladda T

    2004-01-01

    A structural study of low molecular weight rubbers from Jackfruit (Artocarpus heterophyllus) and Painted spurge (Euphorbia heterophylla) was carried out as model compounds of natural rubber from Hevea brasiliensis. The rubber content of latex from Jackfruit was 0.4-0.7%, which is very low compared with that of 30-35% in the latex from Hevea tree. The rubber from Jackfruit latex was low molecular weight with narrow unimodal molecular weight distribution (MWD), whereas that obtained from E. heterophylla showed very broad MWD. The 1H and 13C NMR analyses showed that Jackfruit rubber consists of a dimethylallyl group and two trans-isoprene units connected to a long sequence of cis-isoprene units. The alpha-terminal group of Jackfruit rubber was presumed to be composed of a phosphate group based on the presence of 1H NMR signal at 4.08 ppm corresponding to the terminal =CH-CH2OP group.

  19. Functionalization of Liquid Natural Rubber via Oxidative Degradation of Natural Rubber

    Directory of Open Access Journals (Sweden)

    Suhawati Ibrahim

    2014-12-01

    Full Text Available Natural rubber (NR is a high molecular weight natural polymer and can be degraded to liquid natural rubber (LNR leaving certain functional groups at the end of chains. In this study, LNR samples prepared via oxidative degradation using H2O2 and NaNO2 as reagents were found to have different end groups depending on the pH of the reaction medium. In an acidic medium, LNR with hydroxyl terminal groups was formed as the degradation reaction was initiated by hydroxyl radicals produced from decomposition of peroxynitrite acid. In contrast, a redox reaction took place in an alkaline medium to yield LNR with carbonyl terminal groups. The mechanisms of reaction are discussed and proposed to explain the formation of different end groups when reaction carried out in acidic and alkaline media. Chain degradation in an acidic medium seems to be more effective than in an alkaline medium, and thus yields LNR with lower Mn.

  20. A study of amino acid modifiers in guayule natural rubber

    Science.gov (United States)

    Natural rubber from the Hevea tree is a critical agricultural material vital to United States industry, medicine, and defense, yet the country is dependent on imports to meet domestic needs. Guayule, a desert shrub indigenous to the US, is under development as an alternative source of natural rubber...

  1. Cellulose nanocrystal reinforced oxidized natural rubber nanocomposites.

    Science.gov (United States)

    Mariano, Marcos; El Kissi, Nadia; Dufresne, Alain

    2016-02-10

    Natural rubber (NR) latex particles were oxidized using KMnO4 as oxidant to promote the insertion of hydroxyl groups in the surface polyisoprene chains. Different degrees of oxidation were investigated. Both unoxidized and oxidized NR (ONR) latex were used to prepare nanocomposite films reinforced with cellulose nanocrystals (CNCs) by casting/evaporation. The oxidation of NR was carried out to promote chemical interactions between the hydroxyl groups of ONR with those of CNCs through hydrogen bonding. The effect of the degree of oxidation of the NR latex on the rheological behavior of CNC/NR and CNC/ONR suspensions, as well as on the mechanical, swelling and thermal properties of ensuing nanocomposites was investigated. Improved properties were observed for intermediate degrees of oxidation but they were found to degrade for higher oxidation levels.

  2. Modification of (DGEBA epoxy resin with maleated depolymerised natural rubber

    Directory of Open Access Journals (Sweden)

    2008-04-01

    Full Text Available In this work, diglycidyl ether of bisphenol A (DEGBA type epoxy resin has been modified with maleated depolymerised natural rubber (MDPR. MDPR was prepared by grafting maleic anhydride onto depolymerised natural rubber. MDPR has been characterized by Fourier transform infrared (FT-IR spectroscopy and nuclear magnetic resonance spectroscopy. MDPR was blended with epoxy resin at three different ratios (97/3, 98/2 and 99/1, by keeping the epoxy resin component as the major phase and maleated depolymerised natural rubber component as the minor phase. The reaction between the two blend components took place between the acid/anhydride group in the MDPR and the epoxide group of the epoxy resin. The proposed reaction schemes were supported by the FT-IR spectrum of the uncured Epoxy/MDPR blends. The neat epoxy resin and Epoxy/MDPR blends were cured by methylene dianiline (DDM at 100°C for three hours. Thermal, morphological and mechanical properties of the neat epoxy and the blends were investigated. Free volume studies of the cured, neat epoxy and Epoxy/MDPR blends were correlated with the morphological and mechanical properties of the same systems using Positron Annihilation Lifetime Studies.

  3. Ciprofloxacin Release Using Natural Rubber Latex Membranes as Carrier

    National Research Council Canada - National Science Library

    Dias Murbach, Heitor; Jaques Ogawa, Guilherme; Azevedo Borges, Felipe; Romeiro Miranda, Matheus Carlos; Lopes, Rute; Roberto de Barros, Natan; Guedes Mazalli, Alexandre Vinicius; Gonçalves da Silva, Rosângela; Ferreira Cinman, José Luiz; de Camargo Drago, Bruno; Donizetti Herculano, Rondinelli

    2014-01-01

      Natural rubber latex (NRL) from Hevea brasiliensis is easily manipulated, low cost, is of can stimulate natural angiogenesis and cellular adhesion, is a biocompatible, material and presents high mechanical resistance. Ciprofloxacin (CIP...

  4. Cure and physical properties of natural rubber and epoxidized natural rubber compounds using various types of accelerators

    Directory of Open Access Journals (Sweden)

    Klinpituksa, P.

    2003-01-01

    Full Text Available Cure characteristics and tear properties of epoxidized natural rubber (ENR-33 and natural rubber were studied. Three types of accelerators, namely 2-mercaptobenzothiazole (MBT, 2-morpholinothiobenzothiazole (MBS and N-tert-butyl-2-benzothiazyl sulphenamide (TBBS were used in this work. The conventional valcanization (CV system was used. Cure characteristics were determined using a Monsanto Oscillating Disk Rheometer (ODR 2000 at 150ºC. Also, a systematic study of tear strength was carried out before and after ageing at 70ºC for 72 h. A Hounsfield tensometer (Model H10KS operating at 500 mm/min was used to determine the tear strength using standard angle test pieces. The results indicated that scorch time and cure time of natural rubber are greater than those of ENR-33 compounds. However, the contrary was observed for the minimum and maximum torques and the torque differences. The observation is attributed to the activation of a double bond by the adjacent epoxide group in ENR-33. Furthermore, we found that the change in tear strength of aged ENR sample was greater than that of NR vulcanizates.

  5. Blends of guayule natural rubber latex with commercial latex polymers

    Science.gov (United States)

    Guayule (Parthenium argentatum) is a woody desert shrub that produces natural rubber, cis-1,4 polyisoprene, by biosynthesis. It is currently cultivated in the southwestern United States as a source of latex and rubber for commercial development. Guayule latex is similar to Hevea latex in polymer mo...

  6. Interfacial interaction between the epoxidized natural rubber and silica in natural rubber/silica composites

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Tiwen [College of Materials Science and Engineering, South China University of Technology, Guangzhou 510640 (China); Jia, Zhixin, E-mail: zxjia@scut.edu.cn [College of Materials Science and Engineering, South China University of Technology, Guangzhou 510640 (China); Luo, Yuanfang; Jia, Demin [College of Materials Science and Engineering, South China University of Technology, Guangzhou 510640 (China); Peng, Zheng [Agricultural Product Processing Research Institute, Chinese Academy of Tropical Agriculture Sciences, Zhanjiang 524001 (China)

    2015-02-15

    Highlights: • Substantiate the ring open reaction between Si-OH of silica and epoxy groups of ENR. • ENR can act as a bridge between NR and silica to enhance the interfacial interaction. • As a modifier, ENR gets the potential to be used in the tread of green tire for improving the wet skid resistance apparently. - Abstract: The epoxidized natural rubber (ENR) as an interfacial modifier was used to improve the mechanical and dynamical mechanical properties of NR/silica composites. In order to reveal the interaction mechanism between ENR and silica, the ENR/Silica model compound was prepared by using an open mill and the interfacial interaction of ENR with silica was investigated by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), X-ray diffraction (XRD) and stress–strain testing. The results indicated that the ring-opening reaction occurs between the epoxy groups of ENR chains and Si-OH groups on the silica surfaces and the covalent bonds are formed between two phases, which can improve the dispersion of silica in the rubber matrix and enhance the interfacial combination between rubber and silica. The ring-opening reaction occurs not only in vulcanization process but also in mixing process, meanwhile, the latter seems to be more important due to the simultaneous effects of mechanical force and temperature.

  7. Effect of gamma irradiation on the properties of natural rubber/styrene butadiene rubber blends

    OpenAIRE

    A.B. Moustafa; Rania Mounir; A.A. El Miligy; Maysa A. Mohamed

    2016-01-01

    Blends of natural rubber (NR) with styrene butadiene rubber (SBR) with varying ratios have been prepared. Vulcanization of the prepared blends has been induced by irradiation of gamma rays with varying doses up to 250 kGy. Mechanical properties, namely tensile strength, tensile modulus at 100% elongation, elongation at break have been followed up as a function of irradiation dose as well as blend composition. Physical properties, namely gel fraction and swelling number have been followed up u...

  8. Shear Flow Induced Alignment of Carbon Nanotubes in Natural Rubber

    Directory of Open Access Journals (Sweden)

    Yan He

    2015-01-01

    Full Text Available A new procedure for the fabrication of natural rubber composite with aligned carbon nanotubes is provided in this study. The two-step approach is based on (i the preparation of mixture latex of natural rubber, multiwalled carbon nanotubes, and other components and (ii the orientation of carbon nanotubes by a flow field. Rubber composite sheets filled with variable volume fraction of aligned carbon nanotubes were fabricated and then confirmed by transmission electron microscopy and Raman spectroscopy studies. An obvious increase in thermal conductivity has been obtained after the alignment of carbon nanotubes. The dynamic mechanical analysis was carried out in a tear mode for the composite.

  9. Natural Rubber Based Fuel Rich Propellant for Ramjet Rocket

    OpenAIRE

    Solomon Thomas; T. L. Varghese; Gupta, S. K.; T. S. Ram; V. N. Krishnamurthy

    1992-01-01

    Development of fuel rich propellants for air-breathing propulsion is one of the frontier areas of research. This carries less oxidiser than the normal propellants, uses ram air for complete combustion and is heavily metallised. Studies were conducted at VSSC for the development of hydroxyl-terminated natural rubber (HTNR)-based Mg and Mg-Al alloy-filled polyurethane systems. The HTNR prepolymer was modified to make it free of acid functionality so as to avoid reaction with the metals a...

  10. Time series analysis of the behavior of brazilian natural rubber

    Directory of Open Access Journals (Sweden)

    Antônio Donizette de Oliveira

    2009-03-01

    Full Text Available The natural rubber is a non-wood product obtained of the coagulation of some lattices of forest species, being Hevea brasiliensis the main one. Native from the Amazon Region, this species was already known by the Indians before the discovery of America. The natural rubber became a product globally valued due to its multiple applications in the economy, being its almost perfect substitute the synthetic rubber derived from the petroleum. Similarly to what happens with other countless products the forecast of future prices of the natural rubber has been object of many studies. The use of models of forecast of univariate timeseries stands out as the more accurate and useful to reduce the uncertainty in the economic decision making process. This studyanalyzed the historical series of prices of the Brazilian natural rubber (R$/kg, in the Jan/99 - Jun/2006 period, in order tocharacterize the rubber price behavior in the domestic market; estimated a model for the time series of monthly natural rubberprices; and foresaw the domestic prices of the natural rubber, in the Jul/2006 - Jun/2007 period, based on the estimated models.The studied models were the ones belonging to the ARIMA family. The main results were: the domestic market of the natural rubberis expanding due to the growth of the world economy; among the adjusted models, the ARIMA (1,1,1 model provided the bestadjustment of the time series of prices of the natural rubber (R$/kg; the prognosis accomplished for the series supplied statistically adequate fittings.

  11. Studies on Hydrogenation of Liquid Natural Rubber Using Diimide

    Directory of Open Access Journals (Sweden)

    Nur Hanis Adila Azhar

    2015-01-01

    Full Text Available Liquid natural rubber (LNR is a depolymerized natural rubber (NR which consists of shorter polymeric chains and lower molecular weight (Mw90% was achieved by manipulating the reaction parameters such as sources of diimide, TSH concentration, solvent, and reaction time. The optimum condition was 3 : 1 weight ratio of TSH/LNR in o-xylene at 130°C in 4-hour reaction period.

  12. The Physical Modification of a Natural Rubber-Polypropylene Thermoplastic Elastomer Blend by Azobisformamide Blowing Agent

    OpenAIRE

    Safia Merabet; Farid Riahi; Abdelmalek Douibi

    2012-01-01

    The decomposition of azobisformamide (ABFA) blowing agent and its expansion in a soft grade of thermoplastic natural rubber composed of a 70/30 natural rubber (NR)/polypropylene (PP) was monitored using a Haake plasticorder. The aim of the study was to evaluate the effect of different concentrations of the blowing agent and to investigate its eventual interactions with a sulfur-based curing system that was used for the dynamic vulcanization. The plastograms allowed to detect variations in the...

  13. Rubber recovery from centrifuged natural rubber latex residue using sulfuric acid

    Directory of Open Access Journals (Sweden)

    Wirach Taweepreda

    2013-04-01

    Full Text Available Waste latex sludge from centrifuged residue, which is a null by-product of concentrated latex manufacturing, wasdigested to retrieve the rubber by using sulfuric acid. It was found that the acid concentration and digestion time have aneffect on the amount and purity of the retrieved rubber. Sulfuric acid at concentrations of more than 10% by weight with adigestion time of 48 hours completely digested waste latex sludge and gave rubber 10% by weight. The quality of the retrievedrubber was examined for Mooney viscosity (MV, plasticity retention index, nitrogen content, and ash content. The averagemolecular weight of the retrieved rubber, using gel permeation chromatography, was lower than that of normal natural rubber(NR which corresponds with the MV and initial plasticity (Po. The molecular structure from Fourier transform infraredspectroscopy (FT-IR indicated that the retrieved rubber surface is wet composed with hydroxyl functional ended group.The residue solution was evaporated and crystallized. The structure of crystals was determined using power X-ray diffractometer.

  14. Hardness and compression resistance of natural rubber and synthetic rubber mixtures

    Science.gov (United States)

    Arguello, J. M.; Santos, A.

    2016-02-01

    This project aims to mechanically characterize through compression resistance and shore hardness tests, the mixture of hevea brasiliensis natural rubber with butadiene synthetic rubber (BR), styrene-butadiene rubber (SBR) and ethylene-propylene-diene monomer rubber (EPDM). For each of the studied mixtures were performed 10 tests, each of which increased by 10% the content of synthetic rubber in the mixture; each test consisted of carrying out five tests of compression resistance and five tests of shore hardness. The specimens were vulcanized on a temperature of 160°C, during an approximate time of 15 minutes, and the equipment used in the performance of the mechanical tests were a Shimadzu universal machine and a digital durometer. The results show that the A shore hardness increases directly proportional, with a linear trend, with the content of synthetic BR, SBR or EPDM rubber present in the mixture, being the EPDM the most influential. With respect to the compression resistance is observed that the content of BR or SBR increase this property directly proportional through a linear trend; while the EPDM content also increases but with a polynomial trend.

  15. About the cure kinetics in natural rubber/styrene Butadiene rubber blends at 433 K

    Science.gov (United States)

    Mansilla, M. A.; Marzocca, A. J.

    2012-08-01

    Vulcanized blends of elastomers are employed in several goods mainly to improve physical properties and reduce costs. One of the most used blends of this kind is that composed by natural rubber (NR) and styrene butadiene rubber (SBR). The cure kinetic of these blends depends mainly on the compound formulation and the cure temperature and time. The preparation method of the blends can influence the mechanical properties of the vulcanized compounds. In this work the cure kinetic at 433 K of NR/SBR blends vulcanized with the system sulfur/TBBS (N-t-butyl-2-benzothiazole sulfenamide) is analyzed in samples prepared by mechanical mixing and solution blending. The two methods produce elastomer domains of NR and SBR, which present different microstructure due to the cure level attained during vulcanization. The cure kinetics is studied by means of rheometer tests and the model proposed by Kamal and Sourour. The analysis of the cure rate is presented and is related to the structure obtained during the vulcanization process.

  16. About the cure kinetics in natural rubber/styrene Butadiene rubber blends at 433 K

    Energy Technology Data Exchange (ETDEWEB)

    Mansilla, M.A., E-mail: mmansilla@df.uba.ar [Laboratorio de Polimeros y Materiales Compuestos, Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria, Pabellon 1, C1428EGA Buenos Aires (Argentina); Marzocca, A.J. [Laboratorio de Polimeros y Materiales Compuestos, Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Ciudad Universitaria, Pabellon 1, C1428EGA Buenos Aires (Argentina)

    2012-08-15

    Vulcanized blends of elastomers are employed in several goods mainly to improve physical properties and reduce costs. One of the most used blends of this kind is that composed by natural rubber (NR) and styrene butadiene rubber (SBR). The cure kinetic of these blends depends mainly on the compound formulation and the cure temperature and time. The preparation method of the blends can influence the mechanical properties of the vulcanized compounds. In this work the cure kinetic at 433 K of NR/SBR blends vulcanized with the system sulfur/TBBS (N-t-butyl-2-benzothiazole sulfenamide) is analyzed in samples prepared by mechanical mixing and solution blending. The two methods produce elastomer domains of NR and SBR, which present different microstructure due to the cure level attained during vulcanization. The cure kinetics is studied by means of rheometer tests and the model proposed by Kamal and Sourour. The analysis of the cure rate is presented and is related to the structure obtained during the vulcanization process.

  17. Silencing the lettuce homologs of small rubber particle protein does not influence natural rubber biosynthesis in lettuce (Lactuca sativa).

    Science.gov (United States)

    Chakrabarty, Romit; Qu, Yang; Ro, Dae-Kyun

    2015-05-01

    Natural rubber, cis-1,4-polyisoprene, is an important raw material in chemical industries, but its biosynthetic mechanism remains elusive. Natural rubber is known to be synthesized in rubber particles suspended in laticifer cells in the Brazilian rubber tree (Hevea brasiliensis). In the rubber tree, rubber elongation factor (REF) and its homolog, small rubber particle protein (SRPP), were found to be the most abundant proteins in rubber particles, and they have been implicated in natural rubber biosynthesis. As lettuce (Lactuca sativa) can synthesize natural rubber, we utilized this annual, transformable plant to examine in planta roles of the lettuce REF/SRPP homologs by RNA interference. Among eight lettuce REF/SRPP homologs identified, transcripts of two genes (LsSRPP4 and LsSRPP8) accounted for more than 90% of total transcripts of REF/SRPP homologs in lettuce latex. LsSRPP4 displays a typical primary protein sequence as other REF/SRPP, while LsSRPP8 is twice as long as LsSRPP4. These two major LsSRPP transcripts were individually and simultaneously silenced by RNA interference, and relative abundance, polymer molecular weight, and polydispersity of natural rubber were analyzed from the LsSRPP4- and LsSRPP8-silenced transgenic lettuce. Despite previous data suggesting the implications of REF/SRPP in natural rubber biosynthesis, qualitative and quantitative alterations of natural rubber could not be observed in transgenic lettuce lines. It is concluded that lettuce REF/SRPP homologs are not critically important proteins in natural rubber biosynthesis in lettuce. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Curing characteristics of chlorosulphonated polyethylene and natural rubber blends

    Directory of Open Access Journals (Sweden)

    M. MARINOVIC-CINCOVIC

    2005-05-01

    Full Text Available The dependence of the Mooney scorch time and cure index on the blend ratio of chlorosulphonated polyethylene/natural rubber (CSM/SMR 20 CV and chlorosulphonated polyethylene/chlorinated natural rubber (CSM/Pergut S 40 blends were determined in the temperature range from 120 oC to 160 oC using a Monsanto Mooney viscometer. Semi-efficient vulcanization systems were used for the study. The morphology of the fracture surface of the crosslinked systems was determined by Scanning Electron Microscopy (SEM. The results showed that the scorch time decreased with increasing SMR 20 CV and Pergut S 40 contents. This observation is attributed to the increasing solubility of sulfur, as the content of SMR 20 CV and Pergut S 40 in the composition increased. For temperatures greater than 140 oC, the dependence of the scorch time on blend ratios diminishes, as enough thermal energy is available to overcome the activation energy of vulcanization. The differing curing characteristics of the two blends is explained by the compatibility factor of the respective blend. Morphological analysis of the blends shows a very satisfactory agreement.

  19. Characterization of associated proteins and phospholipids in natural rubber latex.

    Science.gov (United States)

    Sansatsadeekul, Jitlada; Sakdapipanich, Jitladda; Rojruthai, Porntip

    2011-06-01

    Non-rubber components present in natural rubber (NR) latex, such as proteins and phospholipids, are presumed to be distributed in the serum fraction as well as surrounding the rubber particle surface. The phospholipid-protein layers covering the rubber particle surface are especially interesting due to their ability to enhance the colloidal stability of NR latex. In this study, we have characterized the components surrounding the NR particle surface and investigated their role in the colloidal stability of NR particles. Proteins from the cream fraction were proteolytically removed from the NR latex and compare to those from the serum fractions using SDS-polyacrylamide gel electrophoresis revealing that both fractions contained similar proteins in certain molecular weights such as 14.5, 25 and 27 kDa. Phospholipids removed from latex by treatment with NaOH were analyzed using (1)H-NMR spectroscopy and several major signals were assignable to -(CH(2))(n)-, -CH(2)OP, -CH(2)OC═O and -OCH(2)CH(2)NH-. These signals are important evidence that indicates phospholipids associate with the rubber chain. The colloidal behavior of rubber lattices before and after removal of protein-lipid membrane was evaluated by zeta potential analysis and scanning electron microscope (SEM). The lowest zeta potential value of NR particles was observed at pH 10, consequently leading to the highest stability of rubber particles. Additionally, SEM micrographs clearly displayed a gray ring near the particle surface corresponding to the protein-lipid membrane layer.

  20. Effect of urea deproteinization on catalytic hydrogenation of natural rubber latex

    Science.gov (United States)

    Cifriadi, A.; Chalid, M.; Puspitasari, S.

    2017-07-01

    Natural rubber is unsaturated biopolymer which has low resistance to heat, oxygen, and ozone. Chemical modification of natural rubber by catalytic hydrogenation can improve its oxidative property. In this study, the catalytic hydrogenation of natural rubber was investigated in latex phase after reduction of protein content with urea. Hydrogenation of deproteinized natural rubber latex was performed by using diimide which generated insitu from hydrazine hydrate/hydrogen peroxide and catalyst (boric acid, cupric sulfate and cupric acetate) at 70°C for 5 h. The hydrogenation system was stabilized with sodium dodecyl sulphate. The hydrogenation of deproteinized natural rubber (HDPNR) was confirmed by FTIR analysis. The result indicated that cupric sulphate was extremely active catalyst which was showed by the elimination of C=C transmittance bands at 1660 cm-1 on HDPNR spectra and highest degree of hydrogenation. Furthermore, urea deproteinization increased possibility of side reactions during catalytic hydrogenation as seen on the reduction of gel content compared to undeproteinized natural rubber.

  1. Comparative studies on crosslinked and uncrosslinked natural rubber biodegradation by Pseudomonas sp.

    Science.gov (United States)

    Roy, Ram Vinod; Das, Mithu; Banerjee, Rintu; Bhowmick, Anil K

    2006-12-01

    A comparative study on biodegradation of di-cumyl peroxide (DCP) crosslinked and uncrosslinked natural rubber by Pseudomonas sp. was carried out. Decrease in organic carbon content along with the changes in tensile strength of the treated rubber, both DCP crosslinked and uncrosslinked natural rubber, indicated rubber hydrocarbon utilization by the Pseudomonas sp. A decrease in 60.88% MPa and 41.66% MPa was observed after five month's old treated uncrosslinked natural rubber and DCP crosslinked rubber, respectively. Biodegradation was more pronounced in natural uncrosslinked rubber, which was further confirmed by the formation of aldehydic compounds with decrease in CH2 stretching frequencies.

  2. Maillard Reaction in Natural Rubber Latex: Characterization and Physical Properties of Solid Natural Rubber

    Directory of Open Access Journals (Sweden)

    S. Montha

    2016-01-01

    Full Text Available Maillard reaction in Natural Rubber (NR latex was investigated by treating fresh NR latex with glutaraldehyde (C5H8O2 in amounts of 0, 50, 100, and 200 mmol/kg of latex. Protein cross-linking in fresh NR latex and solid NR was confirmed by using sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE and attenuated total reflection infrared (ATR-IR spectroscopy, respectively. It was found that degree of protein cross-linking in NR increased with increasing C5H8O2 concentration. Physical properties of untreated and treated NR substances in terms of gel content, initial Wallace plasticity (P0, plasticity retention index (PRI, Mooney viscosity, and tensile strength were carefully explored. Results clearly showed that the Maillard cross-linking of proteins had remarkable effect on bulk NR properties, that is, solvent resistance, hardness, resistance to oxidation, rheological behavior, and resistance to stretching out.

  3. Tensile Strength of PHBV/Natural Rubber Latex Mixtures

    Directory of Open Access Journals (Sweden)

    Promkotra Sarunya

    2015-01-01

    Full Text Available A polyhydroxybutyrate-co-hydroxyvalerate (PHBV is mingled with natural rubber latex (R to develop its mechanical property of the blend. Normally, substantial effects of the PHBV are hard, fragile, and inelastic, whereas the natural rubber is represented itself as very high elastic matter. The mixtures between the PHBV and natural rubber latex (R are considered in different proportions. The PHBV solutions (w/v are defined suitability at 1% (P1, 2% (P2, and 3% (P3. Their liquid mixtures of the PHBV to natural rubber latex (P:R are fabricated the blended films in three different ratios of 2:3, 1:1 and 3:2, respectively. The PHBV blended films are characterized the crystallinity form by x-ray diffractometry (XRD, which are appeared their identity crystals at 13.30 and 16.68 degree (2θ. Mechanical characterizations of the blends are examined by a universal testing machine (UTM. The average elastic moduli of P1, P2, and P3 mixtures are indicated as 773, 955, and 1,007 kPa, respectively. Their tensile strengths, similarly to elastic moduli, enhance with the PHBV concentrations. The effects of mechanical behaviors and crystallinity reveal that the PHBV blends can be improved their properties by more flexible with natural rubber latex.

  4. Investigation of Mechanical Properties of Magneto-Rheological Ethylene Propylene Diene Monomer and Natural Rubber Type Synthetic Rubbers for Both Isotropic and Anisotropic Situations

    Directory of Open Access Journals (Sweden)

    Uğur Mazlum

    2015-12-01

    Full Text Available Magneto-rheological (MR materials are in a smart material class that has the rheological properties to be quickly and reversibly controlled with the external magnetic field applications. Considering the technological developments the rubber-like smart materials has had a more functional usage area with magneto- rheological effect. This study investigates the axial mechanical properties of magneto-rheological Ethylene Propylene Diene Monomer (EPDM and Natural Rubber (NR type synthetic rubbers for isotropic and anisotropic situations. Also, these composite materials were built by means of hot press systems as either isotropic or anisotropic using magnetic field application after addition of ferromagnetic powders. The influence of magnetic field was investigated. In this study, NR rubber was found to be more susceptible in terms of smart material properties unlike EPDM synthetic rubber.

  5. Unraveling the mystery of natural rubber biosythesis part I: investigation of the composition and growth of in vitro natural rubber using high resolution size exclusion chromatography

    Science.gov (United States)

    Monitoring the growth of in vitro natural rubberwas accomplished by high resolution size exclusion chromatography, SEC.Washed rubber particles isolated from H. brasiliensis latex, containing the rubber transferase enzyme, were used to catalyze the polymerization of synthetic isopentenyl pyrophosphat...

  6. Performance evaluation of the pilot scale upflow anaerobic sludge blanket - Downflow hanging sponge system for natural rubber processing wastewater treatment in South Vietnam.

    Science.gov (United States)

    Watari, Takahiro; Mai, Trung Cuong; Tanikawa, Daisuke; Hirakata, Yuga; Hatamoto, Masashi; Syutsubo, Kazuaki; Fukuda, Masao; Nguyen, Ngoc Bich; Yamaguchi, Takashi

    2017-08-01

    A pilot-scale upflow anaerobic sludge blanket (UASB)-downflow hanging sponge system (DHS) combined with an anaerobic baffled reactor (ABR) and a settling tank (ST) was installed in a natural rubber processing factory in South Vietnam and its process performance was evaluated for 267days. The UASB reactor achieved a total removal efficiency of 55.6±16.6% for chemical oxygen demand (COD) and 77.8±10.3% for biochemical oxygen demand (BOD) with an organic loading rate of 1.7±0.6kg-COD·m(-3)·day(-1). The final effluent of the proposed system had 140±64mg·L(-1) of total COD, 31±12mg·L(-1) of total BOD, and 58±24mg-N·L(-1) of total nitrogen. The system could significantly reduce 92% of greenhouse gas emissions and 80% of hydraulic retention times compared with current treatment systems. Copyright © 2017. Published by Elsevier Ltd.

  7. Natural Rubber Nanocomposite with Human-Tissue-Like Mechanical Characteristic

    Science.gov (United States)

    Murniati, Riri; Novita, Nanda; Sutisna; Wibowo, Edy; Iskandar, Ferry; Abdullah, Mikrajuddin

    2017-07-01

    The blends of synthetic rubber and natural rubber with nanosilica were prepared using a blending technique in presence of different filler volume fraction. The effect of filler on morphological and mechanical characteristics was studied. Utilization of human cadaver in means of medical study has been commonly used primarily as tools of medical teaching and training such as surgery. Nonetheless, human cadaver brought inevitable problems. So it is necessary to find a substitute material that can be used to replace cadavers. In orthopaedics, the materials that resemble in mechanical properties to biological tissues are elastomers such as natural rubber (latex) and synthetic rubber (polyurethanes, silicones). This substitution material needs to consider the potential of Indonesia to help the development of the nation. Indonesia is the second largest country producer of natural rubber in the world. This paper aims to contribute to adjusting the mechanical properties of tissue-mimicking materials (TMMs) to the recommended range of biological tissue value and thus allow the development of phantoms with greater stability and similarity to human tissues. Repeatability for the phantom fabrication process was also explored. Characteristics were then compared to the control and mechanical characteristics of different human body part tissue. Nanosilica is the best filler to produce the best nanocomposite similarities with human tissue. We produced composites that approaching the properties of human internal tissues.

  8. Rheological behavior of raw natural rubber coagulated by microorganisms

    Directory of Open Access Journals (Sweden)

    Zhifen Wang

    2014-01-01

    Full Text Available Tests of the strain sweep, frequency sweep and stress relaxation for raw natural rubber coagulated by microorganisms (NR-m and raw natural rubber coagulated by acid (NR-a were carried out with the use of a rubber process analyzer (RPA. The results showed that the storage torque, complex viscosity of NR-m were higher than those of NR-a while the loss factor was lower. The effect of temperature on viscosity of raw NR was studied following the Arrhenious-Frenkel-Eyring model. The viscous flow behavior of NR-m was poorer than those of NR-a. Furthermore, stress relaxation measurements of raw NR showed a longer period of relaxation for NR-m.

  9. Enhancement of Adhesion between EPDM and Polyester Fabric by Using Natural Rubber Modified by Maleic Anhydride

    Directory of Open Access Journals (Sweden)

    A. A. El-Wakil

    2011-01-01

    Full Text Available This study presents a new method for improving adhesion between ethylene propylene diene monomer (EPDM rubber and polyester fabric. In this work, natural rubber was modified by maleic anhydride in order to improve the adhesion force between ethylene propylene diene monomer rubber and polyester fabric. The effect of thermal aging and ionizing radiation on the stability of the rubber mix as well as on the peel strength of the rubber-coated fabric was investigated. It was observed that the natural rubber modified by maleic anhydride improved the peel strength of the EPDM rubber-coated polyester fabric.

  10. Mechanochromism of a luminescent natural rubber under tensile deformation

    Science.gov (United States)

    Ha, Jimin; Park, Minwook; Jeong, Kwang-Un; Nah, Changwoon

    2016-09-01

    Various examples are reported of chromogenic materials composed of a functional dye covalently linked to the polymer chains or physically dispersed in the continuous macromolecular matrix, the latter appears to be a more sustainable route for the industrial scale-up of these materials. In this study, a mechanochromic elastomer was prepared by physically dispersing dye materials into a rubber matrix by solution mixing technique. The employed rubber is natural rubber (NR). The NR was chosen because of its ability of strain-induced crystallization. Perylene diimide I is selected after considering its aggregachromic nature and affinity with rubber matrix. The optimum composition of dye in rubber composites was determined based on the mechanochromic performance characterized with ultraviolet/visible (UV/Vis) spectrometer, x-ray diffraction (XRD) and spectrofluorometer (FL). The UV/Vis spectrometer and FL monitor the optical responses, such as absorbance and emission property, under tensile deformation due to the breakage of dye aggregates. Spectroscopic analysis with polarization monitors the breakage of dye aggregates and anisotropic property of the sample. The XRD monitors the change in size of dye aggregates. With polarization filtering, the breakage of dye aggregates are clearly observed and anisotropic property of the sample is also confirmed. The XRD results indicate that dye aggregates were broken during stretching because the shear force is applied to dye aggregates.

  11. Allergenic proteins of natural rubber latex.

    Science.gov (United States)

    Yeang, H Y; Arif, Siti Arija M; Yusof, Faridah; Sunderasan, E

    2002-05-01

    As the living cytoplasm of laticiferous cells, Hevea brasiliensis latex is a rich blend of organic substances that include a mélange of proteins. A small number of these proteins have given rise to the problem of latex allergy. The salient characteristics of H. brasiliensis latex allergens that are recognized by the International Union of Immunological Societies (IUIS) are reviewed. These are the proteins associated with the rubber particles, the cytosolic C-serum proteins and the B-serum proteins that originate mainly from the lutoids. Procedures for the isolation and purification of latex allergens are discussed, from latex collection in the field to various preparative approaches adopted in the laboratory. As interest in recombinant latex allergens increases, there is a need to validate recombinant proteins to ascertain equivalence with their native counterparts when used in immunological studies, diagnostics, and immunotherapy.

  12. An interactive web-based design system for rubber injection mold: Automotive rubber parts

    OpenAIRE

    Chamnarn Thongmark; Jariyaporn Onwong

    2016-01-01

    This research aims at integrating a knowledge-based system and web-based technology to facilitate the rubber and rubber composite injection mold design. The system integrates both of computer-aided design and web-based management by using the application programming interface. The research processes started with gathering data and knowledge concerning on rubber injection mold design and process, with the designed framework of the system included. An example part was demonstrated i...

  13. An interactive web-based design system for rubber injection mold: Automotive rubber parts

    OpenAIRE

    Chamnarn Thongmark; Jariyaporn Onwong

    2016-01-01

    This research aims at integrating a knowledge-based system and web-based technology to facilitate the rubber and rubber composite injection mold design. The system integrates both of computer-aided design and web-based management by using the application programming interface. The research processes started with gathering data and knowledge concerning on rubber injection mold design and process, with the designed framework of the system included. An example part was demonstrated i...

  14. Natural rubber/nitrile butadiene rubber/hindered phenol composites with high-damping properties

    Directory of Open Access Journals (Sweden)

    Xiuying Zhao

    2015-10-01

    Full Text Available New natural rubber (NR/nitrile butadiene rubber (NBR/hindered phenol (AO-80 composites with high-damping properties were prepared in this study. The morphological, structural, and mechanical properties were characterized by atomic force microscopy (AFM, polarized Fourier transform infrared spectrometer (FTIR, dynamic mechanical thermal analyzer (DMTA, and a tensile tester. Each composite consisted of two phases: the NR phase and the NBR/AO-80 phase. There was partial compatibility between the NR phase and the NBR/AO-80 phase, and the NR/NBR/AO-80 (50/50/20 composite exhibited a co-continuous morphology. Strain-induced crystallization occurred in the NR phase at strains higher than 200%, and strain-induced orientation appeared in the NBR/AO-80 phase with the increase of strain from 100% to 500%. The composites had a special stress–strain behavior and mechanical properties because of the simultaneous strain-induced orientation and strain-induced crystallization. In the working temperature range of a seismic isolation bearing, the composites (especially the NR/NBR/AO-80 (50/50/20 composite presented a high loss factor, high area of loss peak (TA, and high hysteresis energy. Therefore, the NR/NBR/AO-80 rubber composites are expected to have important application as a high-performance damping material for rubber bearing.

  15. Nanocomposites of natural rubber and polyaniline-modified cellulose nanofibrils

    Science.gov (United States)

    Cellulose nanofibrils (CNF) were isolated from cotton microfibrils (CM) by acid hydrolysis and coated with polyaniline (PANI) by in situ polymerization of aniline onto CNF in the presence of hydrochloride acid and ammonium peroxydisulfate to produce CNF/PANI. Nanocomposites of natural rubber (NR) re...

  16. Three dimensional base isolation system on laminated thick rubber bearings

    Energy Technology Data Exchange (ETDEWEB)

    Kanazawa, Kenji; Matsuda, Akihiro; Hirata, Kazuta [Central Research Inst. of Electric Power Industry, Abiko, Chiba (Japan). Abiko Research Lab.

    1997-08-01

    In order to reduce horizontal and vertical earthquake response of internal equipments in the nuclear power plants, we evaluated the performance of three dimensional base isolation system using laminated thick rubber bearings. From the loading test of scaled model of laminated thick rubber bearing, it was found that the natural rubber bearing was able to be extended to thick rubber bearings, and the difference of mechanical characteristics was only the dependency of the vertical stiffness on the horizontal displacement. Second, we carried out shaking table test for scaled model of base isolated structure. The results showed that horizontal characteristics of thick rubber bearing was almost the same as the thin one, and the vertical stiffness was able to be determined according to the resonance period of internal equipments. After the test, we carried out the numerical analysis on the shaking table test. Numerical results showed that the response of the model for earthquake input motion and its response spectra were in good agreement with the experiment, and the resonance peak of the floor response spectra can be reduced when the damping coefficient of the vertical damper increases. (author)

  17. 75 FR 7586 - Baled Natural Rubber in Tires; TSCA Section 21 Petition; Agency Response

    Science.gov (United States)

    2010-02-22

    ... AGENCY Baled Natural Rubber in Tires; TSCA Section 21 Petition; Agency Response AGENCY: Environmental... prohibiting the use and distribution in commerce of Hevea brasiliensis baled natural-rubber for the... tire ] manufacturers to use Hevea brasiliensis baled natural-rubber that satisfies ASTM...

  18. Structural analysis of sulfur in natural rubber using X-ray absorption near-edge spectroscopy.

    Science.gov (United States)

    Pattanasiriwisawa, Wanwisa; Siritapetawee, Jaruwan; Patarapaiboolchai, Orasa; Klysubun, Wantana

    2008-09-01

    X-ray absorption near-edge spectroscopy (XANES) has been applied to natural rubber in order to study the local environment of sulfur atoms in sulfur crosslinking structures introduced in the vulcanization process. Different types of chemical accelerators in conventional, semi-efficient and efficient vulcanization systems were investigated. The experimental results show the good sensitivity and reproducibility of XANES to characterize the local geometry and electronic environment of the sulfur K-shell under various conditions of vulcanization and non-vulcanization of natural rubber. Several applications of XANES in this study demonstrate an alternative way of identifying sulfur crosslinks in treated natural rubber based on differences in their spectra and oxidation states.

  19. Effect of filler water absorption on water swelling properties of natural rubber

    Science.gov (United States)

    Trakuldee, J.; Boonkerd, K.

    2017-07-01

    The efficient water swelling rubber can be obtained by using high hydrophilic rubber such as chloroprene rubber. However, chloroprene rubber is synthetic rubber developed from the petroleum. Recently, many researches try to replace the usage of synthetic rubber with natural rubber. This is not only due to the concerning of environment but the cost reduction as well. However, natural rubber is hydrophobic, thus not absorbing water. To develop the water swelling rubber from natural rubber, the addition of water absorption filler is needed. The study was aimed to formulate water swelling rubber from natural rubber filled with sodium polyacrylate (SA)/sodium bentonite clay (SBC) hybrid filler used to water absorbent. The filler loading was kept constantly at 150 phr. The effect of SA/SBC ratio varied from 1:0, 1:1, 1:2 and 1:3 on the water absorption of the hybrid filled natural rubber was determined. The obtained result showed that the water adsorption proportionally increased with increasing SA loading but decreased with increasing SBC loading. The effect of glycidyl methacrylate (GM) and poly ethylene glycol (PEG) on the water absorption was studied later. The result from a scanning electron microscope depicted that the presence of GM can depress the falling out of SA from the rubber matrix while the presence of PEG increased water absorption.

  20. Effect of gamma irradiation on the properties of natural rubber/styrene butadiene rubber blends

    Directory of Open Access Journals (Sweden)

    A.B. Moustafa

    2016-09-01

    Full Text Available Blends of natural rubber (NR with styrene butadiene rubber (SBR with varying ratios have been prepared. Vulcanization of the prepared blends has been induced by irradiation of gamma rays with varying doses up to 250 kGy. Mechanical properties, namely tensile strength, tensile modulus at 100% elongation, elongation at break have been followed up as a function of irradiation dose as well as blend composition. Physical properties, namely gel fraction and swelling number have been followed up using benzene as a solvent. Thermal measurements namely thermogravimetric analysis were carried out. The results indicated that the addition of NR has improved the properties of NR / SBR blends. Also NR/SBR blend is thermally stable than NR alone.

  1. Elucidation of filler-to-filler and filler-to-rubber interactions in silica-reinforced natural rubber by TEM Network Visualization

    NARCIS (Netherlands)

    Sarkawi, S.S.; Dierkes, W.K.; Noordermeer, J.W.M.

    2014-01-01

    Filler-to-rubber interaction is a key parameter in the reinforcement of rubber. This paper presents an investigation into filler-to-filler and filler-to-rubber interactions in silica-reinforced natural rubber (NR) in the presence and absence of a silane coupling agent. Using a special network visual

  2. Silica Based Superhydrophobic Nanocoatings for Natural Rubber Surfaces

    Directory of Open Access Journals (Sweden)

    Veromee Kalpana Wimalasiri

    2017-01-01

    Full Text Available Silica based nonfluorinated superhydrophobic coatings for natural rubber surfaces have been developed. The coating was synthesized using nanosilica dispersion and a polychloroprene type binder as a compatibilizer. This nanocoating of silica was applied on to the surface of finished natural rubber gloves, by spray coating or dipped coating methods. The nanocoating demonstrates a water contact angle of more than 150° and sliding angle of 7°. The morphological features of the coating have been studied using scanning electron microscopy and atomic force microscopy while Fourier transform infrared spectroscopy was used to understand the nature of surface functional groups. Both imaging techniques provided evidence for the presence of nanosized particles in the coating. Coated gloves demonstrated comparable mechanical properties and significantly better alcohol resistivity when compared to those of the uncoated gloves.

  3. Ciprofloxacin release using natural rubber latex membranes as carrier.

    Science.gov (United States)

    Dias Murbach, Heitor; Jaques Ogawa, Guilherme; Azevedo Borges, Felipe; Romeiro Miranda, Matheus Carlos; Lopes, Rute; Roberto de Barros, Natan; Guedes Mazalli, Alexandre Vinicius; Gonçalves da Silva, Rosângela; Ferreira Cinman, José Luiz; de Camargo Drago, Bruno; Donizetti Herculano, Rondinelli

    2014-01-01

    Natural rubber latex (NRL) from Hevea brasiliensis is easily manipulated, low cost, is of can stimulate natural angiogenesis and cellular adhesion, is a biocompatible, material and presents high mechanical resistance. Ciprofloxacin (CIP) is a synthetic antibiotic (fluoroquinolone) used in the treatment of infection at external fixation screws sites and remote infections, and this use is increasingly frequent in medical practice. The aim of this study was to develop a novel sustained delivery system for CIP based on NRL membranes and to study its delivery system behavior. CIP was found to be adsorbed on the NRL membrane, according to results of energy dispersive X-ray spectroscopy. Results show that the membrane can release CIP for up to 59.08% in 312 hours and the mechanism is due to super case II (non-Fickian). The kinetics of the drug release could be fitted with double exponential function X-ray diffraction and Fourier transform infrared (FTIR) spectroscopy shows some interaction by hydrogen bound, which influences its mechanical behavior.

  4. Modulus enhancement of natural rubber through the dispersion size reduction of protein/fiber aggregates

    Science.gov (United States)

    Improved mechanical properties of natural rubber are required for various rubber applications. Aggregates of protein and fiber that constitute soy protein concentrate were shear-reduced and used to enhance the tensile modulus of natural rubber. The aqueous dispersion of the shear-reduced aggregates ...

  5. The challenges of silica-silane reinforcement of natural rubber

    NARCIS (Netherlands)

    Dierkes, W.K.; Sarkawi, S.S.; Noordermeer, J.W.M.

    2012-01-01

    In recent years, highly-dispersible silica has become the preferred alternative to carbon-black as reinforcing filler for low rolling-resistance tires. However, the application of this filler system is so far limited to passenger car tires, as their treads contain styrene butadiene rubber (SBR). In

  6. Self-healing properties of carbon nanotube filled natural rubber/bromobutyl rubber blends

    Directory of Open Access Journals (Sweden)

    H. H. Le

    2017-03-01

    Full Text Available In the present work, the development and characterization of an intrinsically self-healable material based on butyl imidazole modified bromobutyl rubber (BIIR/natural rubber (NR blends, which are filled with carbon nanotubes (CNTs are reported. It was found that the addition of CNTs and the blending with NR significantly enhance the tensile strength of the BIIR composites. The use of butyl imidazole as physical cross-linker for the BIIR phase provides the blend composites the non-covalent bondings, which are responsible for their self-healing properties. Owing to the increase of the viscosity of the BIIR phase upon its physical crosslinking the island-matrix morphology of the blend changes over to a co-continuous structure. The preferential wetting of the CNT surface by the low-loading NR phase in the NR/BIIR blends can be explained by the good rubber-filler interaction between the linked phospholipids of the NR molecules and the π-electrons of the CNT surface. As a result, the favored localization of the CNTs in the NR phase strongly improves the electrical properties of the blends according to the double percolation theory. On the other hand it does not deteriorate the self-healing of the BIIR phase. The high electrical conductivity provides us a possibility to heat the blend by application of an electrical voltage in order to accelerate the self-healing process.

  7. Progress in radiation vulcanization of natural rubber latex

    Energy Technology Data Exchange (ETDEWEB)

    Makuuchi, Keizo [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    2000-03-01

    Vulcanization dose defined as the radiation dose at which cross-linked natural rubber in latex has the maximum tensile strength can be reduced by adding carbon tetrachloride as a reaction accelerator. The radiation vulcanization of natural rubber latex was selected as one of regional projects of IAEA in 1989 and a pilot plant was built in Jakarta. The products from it were evaluated during 1983-1985, followed by IAEA decision to support the continued R and D study at Takasaki, JAERI. Various factors to improve the properties of the products have been studied. Several advantages of the process over conventional method, such as absence of N-nitrosoamines, low cytotoxicity, decomposability in the environment, transparency and softness, were confirmed. The technology has been transferred toward commercial application in Thailand, and pilot plants being set up in Indonesia, India, Malaysia and Thailand. Moreover, the process was found to be effective in reducing protein remaining in natural rubber latex products and the initial investment and irradiation cost was found to be greatly reduced by employing low energy electron accelerator. This paper reviews such progress. (S. Ohno)

  8. Progress in radiation vulcanization of natural rubber latex

    Energy Technology Data Exchange (ETDEWEB)

    Makuuchi, Keizo [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    2000-03-01

    Vulcanization dose defined as the radiation dose at which cross-linked natural rubber in latex has the maximum tensile strength can be reduced by adding carbon tetrachloride as a reaction accelerator. The radiation vulcanization of natural rubber latex was selected as one of regional projects of IAEA in 1989 and a pilot plant was built in Jakarta. The products from it were evaluated during 1983-1985, followed by IAEA decision to support the continued R and D study at Takasaki, JAERI. Various factors to improve the properties of the products have been studied. Several advantages of the process over conventional method, such as absence of N-nitrosoamines, low cytotoxicity, decomposability in the environment, transparency and softness, were confirmed. The technology has been transferred toward commercial application in Thailand, and pilot plants being set up in Indonesia, India, Malaysia and Thailand. Moreover, the process was found to be effective in reducing protein remaining in natural rubber latex products and the initial investment and irradiation cost was found to be greatly reduced by employing low energy electron accelerator. This paper reviews such progress. (S. Ohno)

  9. Extractable proteins from field radiation vulcanized natural rubber latex

    Energy Technology Data Exchange (ETDEWEB)

    Parra, Duclerc F. [Chemical and Environmental Centre, Nuclear Energy Research Institute, Av. Lineu Prestes, 2242-CEP Sao Paulo (Brazil)]. E-mail: dfparra@ipen.br; Pinto Martins, Carlos Felipe [Chemical and Environmental Centre, Nuclear Energy Research Institute, Av. Lineu Prestes, 2242-CEP Sao Paulo (Brazil); Collantes, Hugo D.C. [Chemical and Environmental Centre, Nuclear Energy Research Institute, Av. Lineu Prestes, 2242-CEP Sao Paulo (Brazil); Lugao, Ademar B. [Chemical and Environmental Centre, Nuclear Energy Research Institute, Av. Lineu Prestes, 2242-CEP Sao Paulo (Brazil)

    2005-07-01

    The type I allergy associated with the use of natural rubber latex (NRL) products is caused by the NRL proteins leached by the sweat or other body fluids. Makuuchi's group proposed for the first time the proteins removal by the addition of water-soluble polymers (WSP) on radiation vulcanization of natural rubber latex (RVNRL) that is a promising process under development in many countries. In this study, Brazilian field natural rubber was irradiated with a {sup 60}Co gamma source to reduce the content of WSP in the final product. WSP was used as additive to improve the extraction of protein. After irradiation the RVNRL was centrifuged to extract the WSP and proteins. The analytical methodology for protein content was based on the modified Lowry method according to ASTM D5712. Protein determination was carried out in serum of latex and in the extracts of the gloves. The concentration of extractable water-soluble proteins in serum of irradiated field NRL (NRL1), not irradiated one (NRL2); of twice centrifuged sample with polymer additive NRL (NRL3) and of the glove manufactured (NRLG) are compared with commercial glove (CG). The irradiation process increases the extractable water-soluble proteins, EP, as reported in the literature. In this study the use of polymeric additive on the bi-centrifugation process to remove protein was successful and the EP of the glove obtained in NRL3 was at around 40% of the commercial glove.

  10. Metronidazole release using natural rubber latex as matrix

    Directory of Open Access Journals (Sweden)

    Rondinelli Donizetti Herculano

    2010-03-01

    Full Text Available Natural Rubber Latex (NRL can be used successfully in controlled release drug delivery due to their excellent matrix forming properties. Recently, NRL has shown to stimulate angiogenesis, cellular adhesion and the formation of extracellular matrix, promoting the replacement and regeneration of tissue. A dermatological delivery system comprising a topically acceptable, inert support impregnated with a metronidazole (MET solution was developed. MET 2-(2- methyl- 5-nitro- 1H- imidazol- 1-yl ethanol, has been widely used for the treatment of protozoa and anaerobic bacterial infections. MET is a nitroimidazole anti-infective medication used mainly in the treatment of infections caused by susceptible organisms, particularly anaerobic bacteria and protozoa. In a previous study, we have tested NRL as an occlusive membrane for GBR with promising results. One possible way to decrease the inflammatory process, it was incorporated the MET in NRL. MET was incorporated into the NRL, by mixing it in solution for in vitro protein delivery experiments. The solutions of latex and MET were polymerized at different temperatures, from -100 to 40 °C, in order to control the membrane morphology. SEM microscopy analysis showed that the number, size and distribution of pores in NRL membranes varied depending on polymerization temperature, as well as its overall morphology. Results demonstrated that the best drug-delivery system was the membrane polymerized at -100 °C, which does release 77,1% of its MET content for up 310 hours.

  11. Biodegradation of a blended starch/natural rubber foam biopolymer and rubber gloves by Streptomyces coelicolor CH13

    OpenAIRE

    2012-01-01

    Background: The growing problem of environmental pollution caused by synthetic plastics has led to the search for alternative materials such as biodegradable plastics. Of the biopolymers presently under development, starch/natural rubber is one promising alternative. Several species of bacteria and fungi are capable of degrading natural rubber and many can degrade starch. Results: Streptomyces coelicolor CH13 was isolated from soil according to its ability to produce translucent halos on a mi...

  12. How Do “Renewable Products” Impact Biodiversity and Ecosystem Services – The Example of Natural Rubber in China

    Directory of Open Access Journals (Sweden)

    Marc Cotter

    2009-04-01

    Full Text Available This paper aims to present the implications brought by the expansion of “renewable products” plantation systems in the tropics with cultivation of rubber (Hevea brasiliensis as a main focus. Throughout South East Asia, natural forest is being replaced by rubber or oil palm (Elaeis guineensis plantations, with severe consequences for the local flora and fauna. Main aspects of this review are: i The provision of an overview over renewable resources in general and rubber in particular, with eco-physiological and agronomical information concerning rubber cultivation. ii The effect of rubber plantations on biodiversity and species composition under different rubber farming approaches. In addition we debate the possible influences of such large scale land cover transformations on ecosystem services. iii The conversion of natural forests into rubber plantations releases considerable amounts of carbon dioxide into the atmosphere. We estimated these values for different land cover types in southern China and assessed the carbon sequestration potential of local rubber plantations.

  13. Dynamically vulcanized biobased polylactide/natural rubber blend material with continuous cross-linked rubber phase.

    Science.gov (United States)

    Chen, Yukun; Yuan, Daosheng; Xu, Chuanhui

    2014-03-26

    We prepared a biobased material, dynamically vulcanized polylactide (PLA)/natural rubber (NR) blend in which the cross-linked NR phase owned a continuous network-like dispersion. This finding breaks the traditional concept of a sea-island morphology formed after dynamic vulcanization of the blends. The scan electron microscopy and dissolution/swell experiments provided the direct proof of the continuous cross-linked NR phase. This new biobased PLA/NR blend material with the novel structure is reported for the first time in the field of dynamic vulcanization and shows promise for development for various functional applications.

  14. Effect of Silane Treatment on Hybridized Use of Short Cellulose Fibers and Silica Particles for Natural Rubber Reinforcement

    Science.gov (United States)

    Lopattananon, Natinee; Jitkalong, Dolmalik; Seadan, Manus; Sakai, Tadamoto

    Processability, swelling and tensile properties of natural-rubber-based hybrid composites prepared by mixing short cellulose fibers and fine silica particles of equal contents with total loading of 20 phr using a two-roll mill were analyzed. Their properties were compared with those of natural rubber reinforced with single filler (silica or cellulose fiber) and corresponding unfilled natural rubber. The tensile test showed the reinforcing effect of both single filler system and hybrid filler system in relation to natural rubber. The tensile modulus and tensile strength of hybrid composites generally laid between those of fiber-reinforced and silica-reinforced natural rubber composites, whereas the elongation at break of hybrid composites was equal to that of single filler reinforcement system. The Mooney viscosity of silica-filled compound was much higher than that of unfilled natural rubber and short fiber-filled compounds, and was significantly reduced when hybridized fillers were used. Furthermore, a silane coupling agent, Si 69, was used to modify the surface properties of cellulose fibers and silica particles. Three microscopic evaluation techniques, that is, elemental X-ray mapping (EDX), 3D microfocus X-ray scanning, and N-ARC methods were applied to investigate the filler dispersion/mixing effects. It was found that both of the fillers were more homogeneously dispersed in the hybrid composites, and the affinity between the fillers and natural rubber was improved after the silane treatment. The results from this work suggested that the better dispersion of short cellulose fiber/silica hybrid fillers had great advantages in rubber processing, and allowed for equal or higher composite strength compared to a simply silica-filled composite system.

  15. Modified graphite filled natural rubber composites with good thermal conductivity

    Institute of Scientific and Technical Information of China (English)

    Junping Song; Lianxiang Ma; Yan He; Haiquan Yan; Zan Wu; Wei Li

    2015-01-01

    The rubber composites with good thermal conductivity contribute to heat dissipation of tires. Graphite filled natural rubber composites were developed in this study to provide good thermal conductivity. Graphite was coated with polyacrylate polymerized by monomers including methyl methacrylate, n-butyl acrylate and acrylic acid. The ratios between a filler and acrylate polymerization emulsion and those between monomers were varied. Eight types of surface modification formulas were experimentally investigated. Modification formula can affect coating results and composite properties greatly. The best coating type was achieved by a ratio of 1:1 between methyl methacrylate and n-butyl acrylate. The coating of graphite was thermal y stable in a running tire. Filled with modified graphite, the tire thermal conductivity reached up to 0.517–0.569 W·m-1·K-1. In addition, the mechanical performance was improved with increased crosslink density, extended scorch time and short vulcanization time.

  16. Natural Rubber Based Fuel Rich Propellant for Ramjet Rocket

    Directory of Open Access Journals (Sweden)

    Solomon Thomas

    1992-07-01

    Full Text Available Development of fuel rich propellants for air-breathing propulsion is one of the frontier areas of research. This carries less oxidiser than the normal propellants, uses ram air for complete combustion and is heavily metallised. Studies were conducted at VSSC for the development of hydroxyl-terminated natural rubber (HTNR-based Mg and Mg-Al alloy-filled polyurethane systems. The HTNR prepolymer was modified to make it free of acid functionality so as to avoid reaction with the metals and was then reacted with calculated amount of propylene oxide in the presence of tertiary amine catalyst at room temperature. Various levels of Mg and Mg-Al alloy were used in different compositions and the effect on propellant characteristics was studied. TMP and butane diol were used for higher crosslinking, chain extension, etc and their effects were evaluated. Propellant compositions using 30-35 per cent by weight of Mg/Mg-Al alloy with the modified prepolymer have been developed. They exhibit good processibility and mechanical properties. The feasibility of room temperature curing was attempted. Motors weighing 2 kg with 100 mm OD and 200 mm length were successfully static-tested in the primary mode for performance evaluation.

  17. Toughness of natural rubber composites reinforced with hydrolyzed and modified wheat gluten aggregates

    Science.gov (United States)

    The toughness of natural rubber can be improved by using fillers for various rubber applications. Dry wheat gluten is a protein from wheat flour and is sufficiently rigid for rubber reinforcement. The wheat gluten was hydrolyzed to reduce its particle size and microfluidized to reduce and homogenize...

  18. Morphology of Silica-Reinforced Natural Rubber: Effect of Silane Coupling Agent

    NARCIS (Netherlands)

    Sarkawi, S.S.; Dierkes, W.K.; Noordermeer, J.W.M.

    2015-01-01

    A good dispersion of silica in a rubber vulcanizate is important as it influences the filler-to-rubber interaction and consequently the final properties. This article presents an investigation into the morphology of silica-reinforced natural rubber (NR) in the presence and absence of a silane coupli

  19. Thermomechanical analysis of Natural Rubber behaviour stressed at room temperature.

    Science.gov (United States)

    Caborgan, R.; Muracciole, J. M.; Wattrisse, B.; Chrysochoos, A.

    2010-06-01

    Owing to their high molecular mobility, stressed rubber chains can easily change their conformations and get orientated. This phenomena leads to so high reversible draw ratio that this behaviour is called rubber elasticity [1-3]. The analogy with ideal gases leads to an internal energy independent of elongation, the stress being attributed to a so-called configuration entropy. However, this analysis cannot take thermal expansion into account and moreover prohibits predicting standard thermo-elastic effect noticed at small elongations and the thermoelastic inversion effects [4]. This paper aims at : observing and quantifying dissipative and coupling effects associated with deformation energy, generated when Natural Rubber is stretched. re-examine the thermomechanical behaviour model of rubberlike materials, under the generalised standard material concept. From an experimental viewpoint, energy balance is created using infrared and quantitative imaging techniques. Digital Image Correlation (DIC) provides in-the-plane displacement fields and, after derivation, strain and strain-rate fields. We have used those techniques to evidence the thermoelastic inversion effect as shown on Figure 1 where different weights have been fixed to warmed specimen and we monitored the sample deformation while it recovers room temperature. But we have also used those techniques to perform energy balance : analysis of the mechanical equilibrium allows estimates of the stress pattern and computation of deformation energy rates under a plane stress hypothesis [5]. Infrared Thermography (IRT) gives the surface temperature of the sample. To estimate the distribution of heat sources, image processing with a local heat equation and a minimal set of approximation functions (image filtering) was used. The time courses of deformation energy and heat associated with cyclic process are plotted in Figure 2. The time derivatives of both forms of energy are approximately similar. This is consistent with

  20. Thermomechanical analysis of Natural Rubber behaviour stressed at room temperature.

    Directory of Open Access Journals (Sweden)

    Chrysochoos A.

    2010-06-01

    Full Text Available Owing to their high molecular mobility, stressed rubber chains can easily change their conformations and get orientated. This phenomena leads to so high reversible draw ratio that this behaviour is called rubber elasticity [1-3]. The analogy with ideal gases leads to an internal energy independent of elongation, the stress being attributed to a so-called configuration entropy. However, this analysis cannot take thermal expansion into account and moreover prohibits predicting standard thermo-elastic effect noticed at small elongations and the thermoelastic inversion effects [4]. This paper aims at : observing and quantifying dissipative and coupling effects associated with deformation energy, generated when Natural Rubber is stretched. re-examine the thermomechanical behaviour model of rubberlike materials, under the generalised standard material concept. From an experimental viewpoint, energy balance is created using infrared and quantitative imaging techniques. Digital Image Correlation (DIC provides in-the-plane displacement fields and, after derivation, strain and strain-rate fields. We have used those techniques to evidence the thermoelastic inversion effect as shown on Figure 1 where different weights have been fixed to warmed specimen and we monitored the sample deformation while it recovers room temperature. But we have also used those techniques to perform energy balance : analysis of the mechanical equilibrium allows estimates of the stress pattern and computation of deformation energy rates under a plane stress hypothesis [5]. Infrared Thermography (IRT gives the surface temperature of the sample. To estimate the distribution of heat sources, image processing with a local heat equation and a minimal set of approximation functions (image filtering was used. The time courses of deformation energy and heat associated with cyclic process are plotted in Figure 2. The time derivatives of both forms of energy are approximately similar. This

  1. An interactive web-based design system for rubber injection mold: Automotive rubber parts

    Directory of Open Access Journals (Sweden)

    Chamnarn Thongmark

    2016-10-01

    Full Text Available This research aims at integrating a knowledge-based system and web-based technology to facilitate the rubber and rubber composite injection mold design. The system integrates both of computer-aided design and web-based management by using the application programming interface. The research processes started with gathering data and knowledge concerning on rubber injection mold design and process, with the designed framework of the system included. An example part was demonstrated in order to validate the developed system. Based on standardized procedures, the system provides counseling that is able to resolve relevant issues at the early stage of the mold design. The system can be used for both designing and training in rubber mold fabrication.

  2. Genetic and biochemical evaluation of natural rubber from Eastern Washington prickly lettuce (Lactuca serriola L.).

    Science.gov (United States)

    Bell, Jared L; Burke, Ian C; Neff, Michael M

    2015-01-21

    Alternative sources of natural rubber are of importance due to economic, biological, and political threats that could diminish supplies of this resource. Prickly lettuce (Lactuca serriola L.) synthesizes long-chain natural rubber and was studied to determine underlying genetic and phenotypic characteristics of rubber biosynthesis. Genotypic and phenotypic analysis of an F2 segregating population using EST-SSR markers led to the discovery of genetic regions linked to natural rubber production. Interval mapping (IM) and multiple QTL mapping (MQM) identified several QTL in the mapping population that had significance based on LOD score thresholds. The discovered QTL and the corresponding local markers are genetic resources for understanding rubber biosynthesis in prickly lettuce and could be used in marker-assisted selection (MAS) breeding. Prickly lettuce is an excellent candidate for elucidating the rubber synthesis mechanism and has potential as a crop plant for rubber production.

  3. Reinforcing effect of plasma modified halloysite nanotubes in a carbon black filled natural rubber-butadien rubber matrix

    OpenAIRE

    Poikelispaa, Minna; Das, Amit; Dierkes, Wilma; Vuorinen, Jyrki

    2011-01-01

    Rubber composites are generally produced by the direct incorporation of fillers like carbon black and/or silica into the rubber matrix. The incorporation of different types of nanofillers is the subject of recent research with the aim of preparing composites with special compositions and properties. A successful application of such composites depends mainly on the degree of dispersion of the nano-sized fillers. Recently, a naturally occurring clay mineral, halloysite nanotubes (HNTs), is inve...

  4. EFFECT of blend ratio and compatibilizer on solution casted treated waste natural rubber latex/polystyrene blends

    OpenAIRE

    Orathai Boondamnoen; A. Rashid Azura; Masahiro Ohshima; Saowaroj Chuayjuljit; Azlan Ariffin

    2013-01-01

    Natural rubber latex waste (WL) was treated with natural rubber latex (NRL) prior to blend with polystyrene. Differentblend compositions of treated waste natural rubber latex (TWL) and PS were carried out through solution blending. Tensileand tear properties were investigated. The compatibility improvement of the 70/30 TWL/PS blends was further investigatedusing styrene butadiene rubber (SBR) and styrene graft natural rubber (SNR) as compatibilizer. The mechanical properties forTWL/PS blends ...

  5. Study on radiation vulcanization of natural rubber latex

    Institute of Scientific and Technical Information of China (English)

    ZhuNan-Kang; MakuuchiK; 等

    1997-01-01

    The effect of dose rate of 60Co γ-ray on radiation vulacnization of natural rubber latex is studied using Malysian latex with 0.002 mass fraction KOH and 0.05 mass fraction n-BA.Results show that,when radiation doses are 20 and 15kGy,only that the dose rates are greater than 0.49 and 1.6 kGY/h,respectively can make the tensile strength of latex film meet the related standard;besides,storage time of radiation vulcanization latex has no effect on physical properties of the film.

  6. STUDY ON THE PROPERTIES OF BLEND OF NATURAL RUBBER LATEX/METHYL METHACRYLATE GRAFTED RUBBER LATEX BY GAMMA RADIATION

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Natural rubber latex (NRL) and methyl methacrylate (MMA) grafted rubber latex were blended in different ratios and irradiated at various absorbed doses by gamma rays from Co-60 source at room temperature.The tensile properties,swelling ratio and permanent set were measured.The maximum tensile strength and modulus at 500% elongation were obtained at an absorbed dose of 8 kGy.Modulus increases from 6.99 Mpa to 9.87 Mpa for an increase in proportion of MMA grafted rubber from 40% to 60% in the blend at similar absorbed dose.Elongation at break and swelling ratio decrease with increasing absorbed dose as well as the MMA grafted rubber content in the blends.The decreasing trend of permanent set is high up to 5 kGy absorbed dose, and beyond that dose,it becomes almost flat.

  7. Compatibilization of natural rubber (NR and chlorosulfonated polyethylene (CSM blends with zinc salts of sulfonated natural rubber

    Directory of Open Access Journals (Sweden)

    Kwanruethai Boonsong

    2008-07-01

    Full Text Available A rubbery ionomer of zinc salt of sulfonated natural rubbers (Zn-SNR was synthesized and used as a new compatibilizerfor the blends of natural rubber (NR and chlorosulfonated polyethylene (CSM. Epoxidized natural rubber (ENRwas also used for the preparation of NR/CSM blends. The effect of ionomer concentration on melt viscosity of the 50/50(%wt/wt NR/CSM blends at different constant shear rates was characterized. It was found that the incorporation of ionomerincreased shear viscosity of the blends, indicating an increase in interfacial interaction between the NR and CSM. Themaximum shear viscosity was observed when the ionomer of 10% by weight of NR was added into the blends. The tensile,tear, oil resistant properties and morphology of the various 20/80 NR/CSM blends with and without the Zn-SNR and ENR atthe 10% wt of NR were examined. The 100% modulus, tensile strength, tear strength and oil resistance of the compatibilizedblends improved over those of the uncompatibilized blends. The blends compatibilized with the Zn-SNR showed higher levelsof improvement in modulus, tensile and tear strength than those of ENR. The tensile strength of 20/80 blends with the Zn-SNRand ENR compatibilizers increased by 38 and 30% over the corresponding neat blends. Furthermore, the addition of ionomerand ENR resulted in decreased domain of dispersed NR phase size and improved interfacial adhesion between the NR andCSM, indicating enhanced blend compatibility. These results suggest that the Zn-SNR is a new effective compatibilizer forNR and CSM blends.

  8. Temperature dependence of the elastocaloric effect in natural rubber

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Zhongjian, E-mail: zhongjian.xie521@gmail.com; Sebald, Gael; Guyomar, Daniel

    2017-07-12

    The temperature dependence of the elastocaloric (eC) effect in natural rubber (NR) has been studied. This material exhibits a large eC effect over a broad temperature range from 0 °C to 49 °C. The maximum adiabatic temperature change (ΔT) occurred at 10 °C and the behavior could be predicted by the temperature dependence of the strain-induced crystallization (SIC) and the temperature-induced crystallization (TIC). The eC performance of NR was then compared with that of shape memory alloys (SMAs). This study contributes to the SIC research of NR and also broadens the application of elastomers. - Highlights: • A large elastocaloric effect over a broad temperature range was found in natural rubber (NR). • The caloric performance of NR was compared with that of shape memory alloys. • The temperature dependence of the elastocaloric effect in NR can be prediced by the theory of strain-induced crystallization.

  9. Influence of the incorporation process of clay as filler on the properties of natural rubber and epoxidized natural vulcanized rubber; Influencia do processo de incorporacao de argila sobre as propriedades de vulcanizados de borracha natural e borracha natural epoxidada

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Andre L.S. da; Lutckmeier, Rafael; Azeredo, Luciane K. de; Jacobi, Marly A.M., E-mail: andredasilva@ufrgs.br [Universidade Federal do Rio Grande do Sul - UFRGS, Instituto de Quimica, Porto Alegre, RS (Brazil)

    2011-07-01

    Vulcanizates of natural rubber and epoxidized natural rubber, having clay as filler were prepared by different process. The degree of exfoliation of the clay was evaluated by X-ray analysis and mechanical properties were determined by stress-strain. The crosslink density was evaluated by swelling measurements. It could be observed that the use of epoxidized rubber improves significantly the mechanical properties of the vulcanizates. (author)

  10. Extraction and characterization of a natural rubber from Euphorbia characias latex.

    Science.gov (United States)

    Spanò, Delia; Pintus, Francesca; Mascia, Claudia; Scorciapino, Mariano Andrea; Casu, Mariano; Floris, Giovanni; Medda, Rosaria

    2012-08-01

    A natural rubber was identified and characterized for the first time in the latex of the perennial Mediterranean shrub Euphorbia characias. Four different methods, i.e., acetone, acetic acid, trichloroacetic acid, and Triton® X-100, followed by successive treatments with cyclohexane/ethanol, were employed to extract the natural rubber. The rubber content was shown to be 14% (w/v) of the E. characias latex, a low content compared with that of Hevea brasiliensis (30-35%) but a similar content to other rubber producing plants. E. characias rubber showed a molecular weight of 93,000 with a M(w) /M(n) of 2.9. (1) H NMR, (13) C NMR, and FTIR analysis revealed the characteristic of the cis-1,4-polyisoprene typical of natural rubber. These results provided novel insight into latex components and will ultimately benefit the broader understanding of E. characias latex composition.

  11. Temperature dependence on free volume in cured natural rubber and styrene-butadiene rubber blends

    Science.gov (United States)

    Salgueiro, W.; Somoza, A.; Silva, L.; Consolati, G.; Quasso, F.; Mansilla, M. A.; Marzocca, A. J.

    2011-05-01

    A systematic study on the evolution of free volume as a function of the temperature in vulcanized at 433 K natural rubber (NR) and styrene butadiene rubber (SBR) in 25-75, 50-50, 75-25 NR-SBR (percent content of pure NR and SBR, respectively) blends was studied by positron annihilation lifetime spectroscopy. All samples were prepared with sulfur and TBBS (n-t-butyl-2-benzothiazole sulfenamide) as accelerator. The glass transition temperatures of the samples studied were determined by differential scanning calorimetry (DSC) and from lifetime data. In general, a sigmoidal-like complex behavior of the long-lived lifetime component, linked to the nanohole free volume, as a function of the temperature was found. For SBR, the slope of the ortho-positronium lifetime against temperature curves could be well-fitted using a linear function. For blends and also for NR, two different linear functions were necessary. This last behavior is explained in terms of the supercooled process involving a reconfiguration of the elastomeric chains. In the case of blends, the state of cure of NR and SBR in each NR-SBR sample was also taken into account in the discussion of the results obtained. Besides, thermal expansion coefficients of the free volumes in the transition and glassy region of all compounds were estimated. The differences observed in the values of this parameter are discussed by taking into account the morphology and formulation of each blend, the crosslink densities, and the role of the interphases formed between both NR and SBR elastomers.

  12. Identification of laticifer-specific genes and their promoter regions from a natural rubber producing plant Hevea brasiliensis.

    Science.gov (United States)

    Aoki, Yuichi; Takahashi, Seiji; Takayama, Daisuke; Ogata, Yoshiyuki; Sakurai, Nozomu; Suzuki, Hideyuki; Asawatreratanakul, Kasem; Wititsuwannakul, Dhirayos; Wititsuwannakul, Rapepun; Shibata, Daisuke; Koyama, Tanetoshi; Nakayama, Toru

    2014-08-01

    Latex, the milky cytoplasm of highly differentiated cells called laticifers, from Hevea brasiliensis is a key source of commercial natural rubber production. One way to enhance natural rubber production would be to express genes involved in natural rubber biosynthesis by a laticifer-specific overexpression system. As a first step to identify promoters which could regulate the laticifer-specific expression, we identified random clones from a cDNA library of H. brasiliensis latex, resulting in 4325 expressed sequence tags (ESTs) assembled into 1308 unigenes (692 contigs and 617 singletons). Quantitative analyses of the transcription levels of high redundancy clones in the ESTs revealed genes highly and predominantly expressed in laticifers, such as Rubber Elongation Factor (REF), Small Rubber Particle Protein and putative protease inhibitor proteins. HRT1 and HRT2, cis-prenyltransferases involved in rubber biosynthesis, was also expressed predominantly in laticifers, although these transcript levels were 80-fold lower than that of REF. The 5'-upstream regions of these laticifer-specific genes were cloned and analyzed in silico, revealing seven common motifs consisting of eight bases. Furthermore, transcription factors specifically expressed in laticifers were also identified. The common motifs in the laticifer-specific genes and the laticifer-specific transcription factors are potentially involved in the regulation of gene expression in laticifers.

  13. 2013-2014 Production of guayule natural rubber in Arizona, U.S.A.

    Science.gov (United States)

    Natural rubber is a unique biopolymer whose physical properties cannot be replicated in synthetic alternatives; therefore, it is required for production of tires (passenger, truck, and aircraft) and thousands of consumer and medical products. While demand for natural rubber is expected to increase ...

  14. Historical and recent achievements in the field of microbial degradation of natural and synthetic rubber.

    Science.gov (United States)

    Yikmis, Meral; Steinbüchel, Alexander

    2012-07-01

    This review intends to provide an overview of historical and recent achievements in studies of microbial degradation of natural and synthetic rubber. The main scientific focus is on the key enzymes latex-clearing protein (Lcp) from the Gram-positive Streptomyces sp. strain K30 and rubber oxygenase A (RoxA) from the Gram-negative Xanthomonas sp. strain 35Y, which has been hitherto the only known rubber-degrading bacterium that does not belong to the actinomycetes. We also emphasize the importance of knowledge of biodegradation in industrial and environmental biotechnology for waste natural rubber disposal.

  15. Toughening mystery of natural rubber deciphered by double network incorporating hierarchical structures.

    Science.gov (United States)

    Zhou, Weiming; Li, Xiangyang; Lu, Jie; Huang, Ningdong; Chen, Liang; Qi, Zeming; Li, Liangbin; Liang, Haiyi

    2014-12-16

    As an indispensible material for modern society, natural rubber possesses peerless mechanical properties such as strength and toughness over its artificial analogues, which remains a mystery. Intensive experimental and theoretical investigations have revealed the self-enhancement of natural rubber due to strain-induced crystallization. However a rigorous model on the self-enhancement, elucidating natural rubber's extraordinary mechanical properties, is obscured by deficient understanding of the local hierarchical structure under strain. With spatially resolved synchrotron radiation micro-beam scanning X-ray diffraction we discover weak oscillation in distributions of strain-induced crystallinity around crack tip for stretched natural rubber film, demonstrating a soft-hard double network structure. The fracture energy enhancement factor obtained by utilizing the double network model indicates an enhancement of toughness by 3 orders. It's proposed that upon stretching spontaneously developed double network structures integrating hierarchy at multi length-scale in natural rubber play an essential role in its remarkable mechanical performance.

  16. Mechanical Properties of Injection Molded and Compression Molded Samples from Nature-Butadiene Rubber

    OpenAIRE

    Skrobak Adam; Janoštík Václav; Stanek Michal; Manas David; Ovsik Martin; Senkerik Vojtech; Reznicek Martin

    2016-01-01

    The aim of this paper is to show what extent there is an impact on the mechanical properties (tensile strength and tear strength) of a standardized testing sample made of rubber compound based on nature rubber and butadiene rubber produced by injection molding in comparison with a sample produced by classic preparation (cutting out a compression molded plate) according to the standard ISO 23529. For realization of this study it was necessary to design and produce an injection mold for all typ...

  17. Summary of appropriate measures to prevent natural rubber latex allergy

    Directory of Open Access Journals (Sweden)

    Xaver Baur

    1999-01-01

    Full Text Available This paper presents a short overview of the diagnostics and background of type I allergy to natural rubber latex proteins and makes recommendations for preventing corresponding allergic diseases in the future. These recommendations and prevention strategies are based on the current knowledge of latex allergy presented in the literature and are addressed to legislative bodies; manufacturers; directors of hospitals; those working at nursing facilities and physicians' and dentists' practices; as well as to other health service employees. Primary prevention is the focus but advice is also given on secondary prevention. The major preventive aim is the elimination of causative protein allergens in all latex devices and thus, the minimization of latex-related health problems.

  18. Biobased Contents of Natural Rubber Model Compound and Its Separated Constituents

    Directory of Open Access Journals (Sweden)

    Masao Kunioka

    2014-02-01

    Full Text Available Production of rubber products with biobased constituents from biomass resources is desirable for conserving our planet’s limited resources and preventing global warming. Herein, a natural rubber model compound was produced to determine the biobased contents as per various indices for calculating the amount of biomass resources used in rubber products. The biobased mass and biobased carbon contents of the natural rubber model compound were 38.7% and 39.2%, respectively, which were calculated from the feed amounts of the constituents as per the International Organization for Standardization (ISO/the draft of International Standard (DIS 16620-2 and 16620-4. The model compound was separated into its constituents such as polymer, additive, carbon black, and zinc oxide using ISO 1407, 4650, 7720-2, and 9924-3. The biobased carbon content of this model compound was 37.6%, calculated from the percent of modern carbon (pMC, which was measured directly using accelerator mass spectrometry (AMS. The calculated values for this model compound agreed with those calculated from the feed amounts of the constituents. Thus, it was confirmed that these calculation and determination methods of the biobased mass and the biobased carbon contents for rubber products should be published as new ISO international standards after a discussion at technical committee 45, “rubber and rubber products” to evaluate rubber products with larger biobased contents of natural rubber and other biobased ingredients.

  19. Investigation of Swelling and Dissolution Process of Natural Rubber in Aromatic Oil

    Institute of Scientific and Technical Information of China (English)

    Wang Feng; Kuang Minming; Li Guanlong; Zhou Xiaolong; Li Chenglie

    2015-01-01

    Aromatic oil has been used to promote the properties of crumb rubber modiifed asphalt which is an ideal method to deal with the resource utilization of waste rubber tires and by-product of reifnery. Furfural extract oil (FEO) was sepa-rated into the light fraction and the heavy fraction. Swelling and dissolution process of natural rubber sheet in these three oil samples was investigated to shed light on the interaction mechanism. Crumb rubber also interacted on FEO and asphalt respectively. Energy dispersive spectrometer (EDS), thermo-gravimetric analysis (TGA) and scanning electron microscope (SEM) were used to characterize the chemical and structural properties of processed rubber. The chemical composition of processed oils and asphalt was investigated by using the hydrocarbon group analysis (SARA) and gel permeation chroma-tography. The results revealed that the swelling rate and mass loss of rubber in oils were much higher than those in asphalt and rose with an increasing processing temperature. The heavy fraction of FEO had more diffusion and dissolving capabil-ity than the light fraction, whilst compatibility was observed between the heavy fraction and the light fraction. Selective ab-sorption was not observed in the study and detachment of dissolved rubber was disseminated from the outside to the inside. The cross-linking degree of the residue rubber was unchanged with the processing time, and sulfur predominantly remained in the undissolved rubber. Dissolution of crumbed rubber in oils was attributed to devulcanization, while that in the asphalt was mainly attributed to depolymerization.

  20. Innovative neutron shielding materials composed of natural rubber-styrene butadiene rubber blends, boron oxide and iron(III) oxide

    Science.gov (United States)

    Jumpee, C.; Wongsawaeng, D.

    2015-05-01

    Optimized flexible and lightweight neutron shielding materials were designed using the Monte Carlo N-Particle (MCNP) code. Thicknesses of 10 mm and 100 mm were tested for neutron shielding performances. Simulation results indicated that the 10 mm shielding material of natural rubber (NR) and styrene butadiene rubber (SBR) blend (1:1) with 60 part per hundred rubber (phr) boron oxide (B2O3) and 100 mm shielding material with four alternating layers of NR with 100 phr iron (III) oxide (Fe2O3) and of NR and SBR blend (1:1) with 10 phr B2O3 were most suitable for thermal neutron shielding and all-energy neutron shielding, respectively. Experimental results verified the shielding efficiency of these optimal designs and ease of fabrication.

  1. Natural rubber protein as interfacial enhancement for biobased nano-fillers

    Science.gov (United States)

    Natural rubber was enhanced with soy protein nano-aggregates and carbon black using a hybrid process. The rubber composites reinforced with an optimum amount of soy protein or soy protein/carbon black showed useful tensile properties. The stress-strain behaviors were analyzed with a micro-mechanical...

  2. Effect of microfluidized and stearic acid modified soy protein in natural rubber

    Science.gov (United States)

    Microfluidized and stearic acid modified soy protein aggregates were used to reinforced natural rubber. The size of soy protein particles was reduced with a microfluidizing and ball milling process. Filler size reduction with longer ball milling time tends to increase tensile strength of the rubber ...

  3. Effect of concentrated epoxidised natural rubber and silica masterbatch for tyre application

    Science.gov (United States)

    Azira, A. A.; Verasamy, D.; Kamal, M. M.

    2016-07-01

    The availability of concentrated epoxidised natural rubber (ENR-LC) has provided a better opportunity for using epoxidised natural rubber (ENR) with silica to reinforce natural rubber for tyre application. ENR-LC mixed directly with silica to rubber by high speed stirrer without using any coupling agent. Some rubber compounds were prepared by mixing a large amount of precipitated amorphous white silica with natural rubber. The silica was prepared in aqueous dispersion and the filler was perfectly dispersed in the ENR-LC. The performance of the composites was evaluated in this work for the viability of ENR-LC/Si in tyre compounding. Compounding was carried out on a two roll mill, where the additives and curing agents was later mixed. Characterization of these composites was performed by Field Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscopy (TEM) for dispersion as well as mechanical testing. C-ENR/Si showed efficient as primary reinforcing filler in ENR with regard to modulus and tensile strength, resulting on an increase in the stiffness of the rubbers compared to ENR latex. Overall improvement in the mechanical properties for the ENR-LC over the control crosslinked rubber sample was probably due to synergisms of silica reinforcement and crosslinking of the polymeric matrix phase.

  4. A study of protein and amino acids in guayule natural rubber

    Science.gov (United States)

    Natural rubber (NR) from Hevea brasiliensis (the Hevea rubber tree) is a critical agricultural material vital to United States industry, medicine, and defense, yet the country is dependent on NR imports to meet domestic needs. Parthenium argentatum (guayule), a woody desert shrub indigenous to the U...

  5. Influence of nanoclay-carbon black hybrid fillers on cure and properties of natural rubber compounds

    NARCIS (Netherlands)

    Sapkota, J.; Poikelispää, M.; Das, A.; Dierkes, W.K.; Vuorinen, J.

    2013-01-01

    The influence of organically modified nanoclay-carbon black (CB) hybrid filler on the curing behavior of natural rubber (NR) was explored in this investigation. Here an effort was paid to understand the curing kinetics of organomodified nanoclay filled rubber compounds. On the basis of two different

  6. Optimization of mixing conditions for silica-reinforced natural rubber tire tread compounds

    NARCIS (Netherlands)

    Kaewsakul, W.; Sahakaro, K.; Dierkes, W.K.; Noordermeer, J.W.M.

    2012-01-01

    The dump temperature and mixing interval between rubber, silica, and silane coupling agent for silica-filled natural rubber (NR) tire tread compounds using bis-triethoxysilylpropyl tetrasulfide (TESPT) as silane were optimized. The dump temperature turns out to be the key parameter governing the pro

  7. Optimization of mixing conditions for silica-reinforced natural rubber tire tread compounds

    NARCIS (Netherlands)

    Kaewsakul, W.; Sahakaro, K.; Dierkes, W.K.; Noordermeer, J.W.M.

    2011-01-01

    The dump temperature and mixing interval between rubber, silica and silane coupling agent for silica-filled natural rubber (NR) tire tread compounds using bis-triethoxysilylpropyl tetrasulfide (TESPT) as silane were optimized. The dump temperature turns out to be the key parameter governing the prop

  8. Increased damping of natural rubber stocks from prior elongation-retraction

    Science.gov (United States)

    Fitzgerald, Edwin R.

    1995-05-01

    The effects of elongation on the audiofrequency dynamic mechanical properties of a natural rubber (Hevea) gum stock have been described previously in terms of the elastic (J') and the viscous (J') components of a complex shear compliance, J* equals J' - iJ'. In this prior work emphasis was on the changes in compliance levels and the frequency dependencies of the elastic and viscous components at static elongations from 0 to 400%, and after retractions to elongations below 300%. At elongations above 300%, several large, sharp resonances appeared in the compliance-frequency plots coincident with the well known stretch-induced, oriented crystallinity above 300% elongation for the initially amorphous rubber at room temperatures. In the present work attention is on the loss tangent, J'/J', which governs vibration damping, and for which no data were given in the earlier report. After extensions to 400%, as described above, followed by retraction to 275%, for example, values of loss tangent were two or three times those found at any of the first elongations from 0 to 400%. Current measurements using an automated measurement system yield similar results. Additional information on the effect of time at an elongation and the elongation-retraction sequence on enhanced damping has also been gathered. In any case, it is evident that natural rubber gum stocks, ordinarily with low damping, when treated smartly can be changed to high damping materials at some audio frequencies.

  9. Attenuation of foot pressure during running on four different surfaces: asphalt, concrete, rubber, and natural grass.

    Science.gov (United States)

    Tessutti, Vitor; Ribeiro, Ana Paula; Trombini-Souza, Francis; Sacco, Isabel C N

    2012-01-01

    The practice of running has consistently increased worldwide, and with it, related lower limb injuries. The type of running surface has been associated with running injury etiology, in addition other factors, such as the relationship between the amount and intensity of training. There is still controversy in the literature regarding the biomechanical effects of different types of running surfaces on foot-floor interaction. The aim of this study was to investigate the influence of running on asphalt, concrete, natural grass, and rubber on in-shoe pressure patterns in adult recreational runners. Forty-seven adult recreational runners ran twice for 40 m on all four different surfaces at 12 ± 5% km · h(-1). Peak pressure, pressure-time integral, and contact time were recorded by Pedar X insoles. Asphalt and concrete were similar for all plantar variables and pressure zones. Running on grass produced peak pressures 9.3% to 16.6% lower (P rubber was greater than on concrete for the rearfoot and midfoot. The behaviour of rubber was similar to that obtained for the rigid surfaces - concrete and asphalt - possibly because of its time of usage (five years). Running on natural grass attenuates in-shoe plantar pressures in recreational runners. If a runner controls the amount and intensity of practice, running on grass may reduce the total stress on the musculoskeletal system compared with the total musculoskeletal stress when running on more rigid surfaces, such as asphalt and concrete.

  10. An overview of the potentials of natural rubber (Hevea brasiliensis ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-12-29

    Dec 29, 2009 ... Rubber grows well in deciduous rain-forest regions of lowland tropics with temperature ranges of between 21. - 35°C and a well distributed .... In the bark of the rubber tree is a complex network of laticifers, or latex vessels, ... develop into embryo-like structures that go on to form plantlets. MULTIPLYING ...

  11. Effect of different plasticizers on the properties of bio-based thermoplastic elastomer containing poly(lactic acid) and natural rubber

    OpenAIRE

    V. Tanrattanakul; P. Bunkaew

    2014-01-01

    Bio-based thermoplastic elastomers (TPE) containing natural rubber and poly(lactic acid) were prepared by melt blending in an internal mixer. The blend ratio was 60% of natural rubber and 40% of poly(lactic acid). Dynamic vulcanization of natural rubber was performed with the sulfur system. The 2 mm – thick sheet samples were prepared by compression molding. The objective of this study was to investigate the effect of plasticization of PLA on the mechanical and physical properties of the deri...

  12. Comprehensive Proteomics Analysis of Laticifer Latex Reveals New Insights into Ethylene Stimulation of Natural Rubber Production.

    Science.gov (United States)

    Wang, Xuchu; Wang, Dan; Sun, Yong; Yang, Qian; Chang, Lili; Wang, Limin; Meng, Xueru; Huang, Qixing; Jin, Xiang; Tong, Zheng

    2015-09-08

    Ethylene is a stimulant to increase natural rubber latex. After ethylene application, both fresh yield and dry matter of latex are substantially improved. Moreover, we found that ethylene improves the generation of small rubber particles. However, most genes involved in rubber biosynthesis are inhibited by exogenous ethylene. Therefore, we conducted a proteomics analysis of ethylene-stimulated rubber latex, and identified 287 abundant proteins as well as 143 ethylene responsive latex proteins (ERLPs) with mass spectrometry from the 2-DE and DIGE gels, respectively. In addition, more than 1,600 proteins, including 404 ERLPs, were identified by iTRAQ. Functional classification of ERLPs revealed that enzymes involved in post-translational modification, carbohydrate metabolism, hydrolase activity, and kinase activity were overrepresented. Some enzymes for rubber particle aggregation were inhibited to prolong latex flow, and thus finally improved latex production. Phosphoproteomics analysis identified 59 differential phosphoproteins; notably, specific isoforms of rubber elongation factor and small rubber particle protein that were phosphorylated mainly at serine residues. This post-translational modification and isoform-specific phosphorylation might be important for ethylene-stimulated latex production. These results not only deepen our understanding of the rubber latex proteome but also provide new insights into the use of ethylene to stimulate rubber latex production.

  13. Thermodynamic parameters of elasticity and electrical conductivity of reinforced natural rubber (nr vulca nizates

    Directory of Open Access Journals (Sweden)

    B.F. Adeosun

    2004-12-01

    Full Text Available The thermodynamic parameters (change in free energy of elasticity, ΔGe; change in enthalpy of elasticity, ΔHe; and change in entropy of elasticity, ΔSe and the electrical conductivity of natural rubber composites reinforced separately with some agricultural wastes have been determined. Results show that the reinforced composites are relatively more ordered and more spontaneous to elasticity than the unreinforced composite. These more ordered composites were observed to conduct electricity better than the unreinforced. The inclusion of the agricultural wastes examined in the formulation of natural rubber composite enhances the elasticity and the electrical conductivity of natural rubber.

  14. Influence of protein hydrolysis on the mechanical properties of natural rubber composites reinforced with soy protein particles

    Science.gov (United States)

    For natural rubber applications, the reinforcing fillers are used to improve the mechanical properties of the rubber. Soy protein particles have been shown to reinforce natural rubber. The hydrolysis conditions of soy protein are studied to understand its effect on the particle size and size distrib...

  15. Analysis of Physical Properties and Mineralogical of Pyrolysis Tires Rubber Ash Compared Natural Sand in Concrete material

    Science.gov (United States)

    Syamir Senin, Mohamad; Shahidan, Shahiron; Syazani Leman, Alif; Izzati Raihan Ramzi Hannan, Nurul

    2016-11-01

    Waste tires pose significant health and environmental concerns if not recycled or discarded properly. At the same time, natural sand is becoming scarcer and costlier due to its non-availability. Waste tires as fine aggregate can be an economical and sustainable alternative to the natural sand. Recent years, the interest on recycling waste tires into civil engineering applications by the researchers has increased. In this research, the chemical and physical properties of the tires rubber ash and the natural sand have been analysed. The densities of the rubber ash are lower than the natural sand. Rubber ash had finer particle size compared to the natural sand. Almost all chemical in the natural sand had in rubber ash with the additional sulphur trioxide and zinc oxide in the rubber ash, made the rubber ash better than natural sand. Rubber ash seems to be a suitable material to use in concrete as sand replacement.

  16. EFFECT of blend ratio and compatibilizer on solution casted treated waste natural rubber latex/polystyrene blends

    Directory of Open Access Journals (Sweden)

    Orathai Boondamnoen

    2013-10-01

    Full Text Available Natural rubber latex waste (WL was treated with natural rubber latex (NRL prior to blend with polystyrene. Differentblend compositions of treated waste natural rubber latex (TWL and PS were carried out through solution blending. Tensileand tear properties were investigated. The compatibility improvement of the 70/30 TWL/PS blends was further investigatedusing styrene butadiene rubber (SBR and styrene graft natural rubber (SNR as compatibilizer. The mechanical properties forTWL/PS blends were improved at 15 phr of SNR.

  17. Synthesis, characterization and degradation behavior of admicelled polyacrylate-natural rubber

    Energy Technology Data Exchange (ETDEWEB)

    Pongpilaipruet, Angkana; Magaraphan, Rathanawan, E-mail: rathanawan.k@chula.ac.th

    2015-06-15

    In order to improve weatherability of the cured natural rubber, the novel introduction of good ozone resistant polymers such as polyacrylates (poly(methyl acrylate) (PMA) or poly(methyl methacrylate) (PMMA)) into natural rubber (NR) by admicellar polymerization was investigated in this work. The admicellar polymerization to synthesize polyacrylate layer over the surface of NR latex particles was performed with varying monomer type (PMA and PMMA) and content (50 and 100 mM). The admicelled PMMA showed higher molecular weight than PMA. Fourier transform infrared spectra of the admicellar synthesized natural rubbers exhibited characteristic peaks of those polyacrylates. Micrographs from transmission electron and field emission scanning electron microscopes (FE-SEM) revealed the coatings of PMA and PMMA over the rubber particles, suggesting a core-shell structure. Thermogravimetric analysis revealed that the admicelled rubbers not only showed an improvement in heat stability but also a single decomposition temperature. After vulcanization, FE-SEM results showed the cured admicelled rubbers had phase transformation from core-shell to phase separation (aggregate domains of polyacrylate-rich phase) with smooth interface. This agreed well to their one glass transition temperature (∼−48 °C) which indicated good miscibility between NR and each polyacrylate. The cracks generated after exposure to ozone found in the admicelled rubbers were smaller than those in NR, suggesting better ozone resistance was achieved. Increasing monomer concentration led to less cracks or much better ozone resistance. Furthermore, changes in mechanical properties after ozone exposure of the admicelled PMA-NR were less than those of the admicelled PMMA-NR (having the same shell content) and the NR, respectively. - Highlights: • We use admicellar technique to add polyacrylates to NR in form of core-shell rubber. • This core-shell structure was physically formed as seen by the phase

  18. Radiation Vulcanised Natural Rubber Latex: safer than conventionally processed latex?

    NARCIS (Netherlands)

    Geertsma RE; Orzechowski TJH; Jonker M; Dorpema JW; Asten JAAM van; LGM

    1996-01-01

    Door middel van cytotoxiciteitstesten is aangetoond dat RVNRL (straling-gevulcaniseerde natuurlijke latex rubber) materialen aanzienlijk minder cytotoxisch zijn dan zwavel-gevulcaniseerde materialen. Dit is een sterke aanwijzing dat een deel van de allergieproblemen, namelijk de zogeheten Type

  19. On the release of metronidazole from natural rubber latex membranes

    Energy Technology Data Exchange (ETDEWEB)

    Herculano, Rondinelli D., E-mail: rond@assis.unesp.br [Departamento de Ciencias Biologicas - Faculdade de Ciencias e Letras de Assis-Universidade Estadual Paulista, Av. Dom Antonio, 2100, Zip Code: 19806-900, Assis, SP (Brazil); Alencar de Queiroz, Alvaro A. [Departamento de Fisica e Quimica-Universidade Federal de Itajuba, Itajuba, MG (Brazil); Kinoshita, Angela [Universidade do Sagrado Coracao-Rua Irma Arminda, 10-50, Bauru, SP (Brazil); Oliveira, Osvaldo N. [Instituto de Fisica de Sao Carlos-Universidade de Sao Paulo, Sao Carlos, SP (Brazil); Graeff, Carlos F.O. [Departamento de Fisica - FC - Universidade Estadual Paulista, Bauru, SP (Brazil)

    2011-03-12

    The controlled release of drugs can be efficient if a suitable encapsulation procedure is developed, which requires biocompatible materials to hold and release the drug. In this study, a natural rubber latex (NRL) membrane is used to deliver metronidazole (MET), a powerful antiprotozoal agent. MET was found to be adsorbed on the NRL membrane, with little or no incorporation into the membrane bulk, according to energy dispersive X-ray spectroscopy. X-ray diffraction and FTIR spectroscopy data indicated that MET retained its structural and spectroscopic properties upon encapsulation in the NRL membrane, with no molecular-level interaction that could alter the antibacterial activity of MET. More importantly, the release time of MET in a NRL membrane in vitro was increased from the typical 6-8 h for oral tablets or injections to ca. 100 h. The kinetics of the drug release could be fitted with a double exponential function, with two characteristic times of 3.6 and 29.9 h. This is a demonstration that the induced angiogenesis known to be provided by NRL membranes can be combined with a controlled release of drugs, whose kinetics can be tailored by modifying experimental conditions of membrane fabrication for specific applications.

  20. Micro-organisms in latex and natural rubber coagula of Hevea brasiliensis and their impact on rubber composition, structure and properties.

    Science.gov (United States)

    Salomez, M; Subileau, M; Intapun, J; Bonfils, F; Sainte-Beuve, J; Vaysse, L; Dubreucq, E

    2014-10-01

    Natural rubber, produced by coagulation of the latex from the tree Hevea brasiliensis, is an important biopolymer used in many applications for its outstanding properties. Besides polyisoprene, latex is rich in many nonisoprene components such as carbohydrates, proteins and lipids and thereby constitutes a favourable medium for the development of micro-organisms. The fresh rubber coagula obtained by latex coagulation are not immediately processed, allowing the development of various microbial communities. The time period between tree tapping and coagula processing is called maturation, during which an evolution of the properties of the corresponding dry natural rubber occurs. This evolution is partly related to the activity of micro-organisms and to the modification of the biochemical composition. This review synthesizes the current knowledge on microbial populations in latex and natural rubber coagula of H. brasiliensis and the changes they induce on the biochemistry and technical properties of natural rubber during maturation.

  1. Thermomechanical analysis of Natural Rubber behaviour stressed at room temperature.

    OpenAIRE

    Chrysochoos A.; Wattrisse B.; Muracciole J.M.; Caborgan R.

    2010-01-01

    Owing to their high molecular mobility, stressed rubber chains can easily change their conformations and get orientated. This phenomena leads to so high reversible draw ratio that this behaviour is called rubber elasticity [1-3]. The analogy with ideal gases leads to an internal energy independent of elongation, the stress being attributed to a so-called configuration entropy. However, this analysis cannot take thermal expansion into account and moreover prohibits predicting standard th...

  2. Characterization of the natural rubber from new rubber tree clones of PB 300 series; Caracterizacao da borracha natural dos novos clones de seringueira da serie PB 300

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Maycon J.; Spinelli, Rafaela O.; Moreno, Rogerio M.B.; Mattoso, Luiz H.C.; Martins, Maria Alice, E-mail: maria-alice.martins@embrapa.br [Embrapa Instrumentacao/LNNA, Sao Carlos, SP (Brazil); Scaloppi Junior, Erivaldo J. [Instituto Agronomico (IAC), Votuporanga, SP (Brazil). Centro de Seringueira e Sistemas Agroflorestais; Goncalves, Paulo de S. [Instituto Agronomico (IAC), Campinas, SP (Brazil)

    2015-07-01

    The natural rubber (NR) is present in more than 2500 species of plants, being the Hevea brasiliensis the most commercially exploited. It is a raw material of great importance to the Brazilian economy, but the country faces a production's deficit, having to import about 60% of its consumption. In this work , the latex obtained from rubber tree of new clones of PB series 300 (PB 311, PB 312, PB 314 , PB 326, PB 346 and PB 350 ) and RRIM 600 (control) were characterized by dry rubber content (DRC), total solids content, distribution of particle size, Zeta potential, thermogravimetry, differential scanning calorimetry, infrared in the spectroscopy (FTIR), nuclear magnetic resonance (NMR) and technological properties. The DRC values ranged from 33% to 40%, and total solids of 38% to 44%. All of the clones showed average particle diameter between 180.0 to 192.1 nm, excluding clones PB 326 and PB 346 with 150.0 nm and 157.9 nm, respectively. The NMR spectra and FTIR showed that the structure of the natural rubber from all clones studied is cis -1,4- polyisoprene. Natural rubber from the new clones showed good thermal stability up to 285 °C and glass transition temperature of -64 °C. (author)

  3. Cure modification of natural rubber containing benzothiazole accelerators by some modified thiocarbamyl sulfenamides

    NARCIS (Netherlands)

    Datta, R.N.; Debnath, S.C.; Noordermeer, J.W.M.

    2003-01-01

    The effects of N-cyclopentamethylene thiocarbamyl-N-(cyclohexyl,thiocyclohexyl)sulfenamide (CPCTS) and N-oxydiethylene thiocarbamyl-N-(cyclohexyl,thiocyclohexyl)sulfenamide (ODCTS) as cure modifiers on the vulcanization of natural rubber (NR) containing benzothiazole accelerators were studied. CPCTS

  4. Natural Rubber Latex Hypersensitivity: Incidence and Prevalence of Type I Allergy in the Dental Professional

    National Research Council Canada - National Science Library

    HAMANN, CURTIS P; TURJANMAA, KRISTIINA; RIETSCHEL, ROBERT; SIEW, CHAKWAN; OWENSBY, DAVID; GRUNINGER, STEPHEN E; SULLIVAN, KIM M

    1998-01-01

    The authors investigated the prevalence of immediate (Type I) hypersensitivity to gloves made from natural rubber latex, or NRL, by performing skin-prick tests on 2,166 dental workers over the course of a two-year period...

  5. Morphological Study on Room-Temperature-Cured PMMA-Grafted Natural Rubber-Toughened Epoxy/Layered Silicate Nanocomposite

    Directory of Open Access Journals (Sweden)

    N. Y. Yuhana

    2012-01-01

    Full Text Available A morphological study was conducted on ternary systems containing epoxy, PMMA-grafted natural rubber, and organic chemically modified montmorillonite (Cloisite 30B. Optical microscopy, transmission electron microscopy (TEM, scanning electron microscopy (SEM, energy dispersive X-ray (EDX, and wide-angle X-ray diffraction (WAXD analysis were used. The following four materials were prepared at room temperature: cured unmodified epoxy, cured toughened epoxy, cured unmodified epoxy/Cloisite 30B nanocomposites, and cured toughened epoxy/Cloisite 30B nanocomposites. Mixing process was performed by mechanical stirring. Poly(etheramine was used as the curing agent. The detailed TEM images revealed co-continuous and dispersed spherical rubber in the epoxy-rubber blend, suggesting a new proposed mechanism of phase separation. High-magnification TEM analysis showed good interactions between rubber and Cloisite 30B in the ternary system. Also, it was found that rubber particles could enhance the separation of silicates layers. Both XRD and TEM analyses confirmed that the intercalation of Cloisite 30B was achieved. No distinct exfoliated silicates were observed by TEM. Aggregates of layered silicates (tactoids were observed by SEM and EDX, in addition to TEM at low magnification. EDX analysis confirmed the presence of organic and inorganic elements in the binary and ternary epoxy systems containing Cloisite 30B.

  6. New Green Polymeric Composites Based on Hemp and Natural Rubber Processed by Electron Beam Irradiation

    OpenAIRE

    Maria-Daniela Stelescu; Elena Manaila; Gabriela Craciun; Maria Dumitrascu

    2014-01-01

    A new polymeric composite based on natural rubber reinforced with hemp has been processed by electron beam irradiation and characterized by several methods. The mechanical characteristics: gel fraction, crosslink density, water uptake, swelling parameters, and FTIR of natural rubber/hemp fiber composites have been investigated as a function of the hemp content and absorbed dose. Physical and mechanical properties present a significant improvement as a result of adding hemp fibres in blends. O...

  7. 天然胶/公共网络/废胶粉互穿聚合物网络%Interpenetrating Polymer Networks Constituted by Scrap Rubber Powder / Natural Rubber / Public Network

    Institute of Scientific and Technical Information of China (English)

    杨莉; 邱贤华

    2012-01-01

    通过互穿聚合物网络技术成功制备了天然橡胶/公共网络/废胶粉共轭三组分,并测定了力学性能和微观形态.结果表明:当A/B摩尔比为2/1、AB含量为4.5%、废胶粉粒径为60目、废胶粉含量为15%时,体系的力学性能最好,共轭三组分天然橡胶/公共网络/废胶粉体系的磨耗体积明显低于两组分天然橡胶/废胶粉体系的磨耗体积.界面共轭互穿改善了界面结合,可减少反复压缩过程中的相间摩擦生热和变形.%The natural rubber/public network/scrap rubber powder conjugated three-component interpenetrating polymer network was prepared through interpenetrating polymer network technology, and determined the mechanical performance and the microscopic shape. Results indicated that the mechanical performance for system was best when the A/B mole ratio was 2/1 with the AB content of 4.5%, the particle size of 60 item for scrap rubber powder, the content of 15% for scrap rubber powder, the abrasion volume of conjugated three-component natural rubber/public network/scrap rubber powder system was clearly lower than that of two -component natural rubber/scrap rubber powder system. The interface conjugated interpenetration improved the interface union, which might reduce the interphase friction-generated heat and distortion in the repeated process.

  8. Complete genome sequence of Streptomyces sp. strain CFMR 7, a natural rubber degrading actinomycete isolated from Penang, Malaysia.

    Science.gov (United States)

    Nanthini, Jayaram; Chia, Kim-Hou; Thottathil, Gincy P; Taylor, Todd D; Kondo, Shinji; Najimudin, Nazalan; Baybayan, Primo; Singh, Siddharth; Sudesh, Kumar

    2015-11-20

    Streptomyces sp. strain CFMR 7, which naturally degrades rubber, was isolated from a rubber plantation. Whole genome sequencing and assembly resulted in 2 contigs with total genome size of 8.248 Mb. Two latex clearing protein (lcp) genes which are responsible for rubber degrading activities were identified.

  9. A comparative investigation on strain induced crystallization for graphene and carbon nanotubes filled natural rubber composites

    Directory of Open Access Journals (Sweden)

    D. H. Fu

    2015-07-01

    Full Text Available Natural rubber containing graphene and carbon nanotubes (CNTs composites were prepared by ultrasonicallyassisted latex mixing. Natural rubber filled by both graphene and CNTs show significant enhanced tensile strength, while graphene exhibits a better reinforcing effect than CNTs. Strain-induced crystallization in natural rubber composites during stretching was determined by synchrotron wide-angle X-ray diffraction. With the addition of CNTs or graphene, the crystallization for natural rubber occurs at a lower strain compared to unfilled natural rubber, and the strain amplification effects were observed. The incorporation of graphene results in a faster strain-induced crystallization rate and a higher crystallinity compared to CNTs. The entanglement-bound rubber tube model was used to analyze the chain network structure and determine the network parameters of composites. The results show that the addition of graphene or CNTs has an influence on the molecular network structure and improves the contribution of entanglement to the conformational constraint, while graphene has a more marked effect than CNTs.

  10. Development of SBR-Nanoclay Composites with Epoxidized Natural Rubber as Compatibilizer

    Directory of Open Access Journals (Sweden)

    R. Rajasekar

    2009-01-01

    Full Text Available The significant factor that determines the improvement of properties in rubber by the incorporation of nanoclay is its distribution in the rubber matrix. The simple mixing of nonpolar rubber and organically modified nanoclay will not contribute for the good dispersion of nanofiller in the rubbery matrix. Hence a polar rubber like epoxidized natural rubber (ENR can be used as a compatibilizer in order to obtain a better dispersion of the nanoclay in the matrix polymer. Epoxidized natural rubber and organically modified nanoclay composites (EC were prepared by solution mixing. The nanoclay employed in this study is Cloisite 20A. The obtained nanocomposites were incorporated in styrene butadiene-rubber (SBR compounds with sulphur as a curing agent. The morphology observed through X-ray diffraction (XRD and high-resolution transmission electron microscopy (HR-TEM shows that the nanoclay is highly intercalated in ENR, and further incorporation of EC in SBR matrix leads to partial exfoliation of the nanoclay. Dynamic mechanical thermal analysis showed an increase in storage modulus and lesser damping characteristics for the compounds containing EC loading in SBR matrix. In addition, these compounds showed improvement in the mechanical properties.

  11. Natural Rubber-Filler Interactions: What Are the Parameters?

    Science.gov (United States)

    Chan, Alan Jenkin; Steenkeste, Karine; Canette, Alexis; Eloy, Marie; Brosson, Damien; Gaboriaud, Fabien; Fontaine-Aupart, Marie-Pierre

    2015-11-17

    Reinforcement of a polymer matrix through the incorporation of nanoparticles (fillers) is a common industrial practice that greatly enhances the mechanical properties of the composite material. The origin of such mechanical reinforcement has been linked to the interaction between the polymer and filler as well as the homogeneous dispersion of the filler within the polymer matrix. In natural rubber (NR) technology, knowledge of the conditions necessary to achieve more efficient NR-filler interactions is improving continuously. This study explores the important physicochemical parameters required to achieve NR-filler interactions under dilute aqueous conditions by varying both the properties of the filler (size, composition, surface activity, concentration) and the aqueous solution (ionic strength, ion valency). By combining fluorescence and electron microscopy methods, we show that NR and silica interact only in the presence of ions and that heteroaggregation is favored more than homoaggregation of silica-silica or NR-NR. The interaction kinetics increases with the ion valence, whereas the morphology of the heteroaggregates depends on the size of silica and the volume percent ratio (dry silica/dry NR). We observe dendritic structures using silica with a diameter (d) of 100 nm at a ∼20-50 vol % ratio, whereas we obtain raspberry-like structures using silica with d = 30 nm particles. We observe that in liquid the interaction is controlled by the hydrophilic bioshell, in contrast to dried conditions, where hydrophobic polymer dominates the interaction of NR with the fillers. A good correlation between the nanoscopic aggregation behavior and the macroscopic aggregation dynamics of the particles was observed. These results provide insight into improving the reinforcement of a polymer matrix using NR-filler films.

  12. Fatigue effect of elastocaloric properties in natural rubber.

    Science.gov (United States)

    Sebald, Gael; Xie, Zhongjian; Guyomar, Daniel

    2016-08-13

    In the framework of elastocaloric (eC) refrigeration, the fatigue effect on the eC effect of natural rubber (NR) is investigated. Repetitive deformation cycles at engineering strain regime from 1 to 6 results in a rapid rupture (approx. 800 cycles). Degradation of properties and fatigue life are then investigated at three different strain regimes with the same strain amplitude: before onset strain of strain-induced crystallization (SIC) (strain regime of 0-3), onset strain of melting (strain regime of 2-5) and high strain of SIC (strain regime of 4-7). Strain of 0-3 leads to a low eC effect and cracking after 2000 cycles. Strain of 2-5 and 4-7 results in an excellent crack growth resistance and much higher eC effect with adiabatic temperature changes of 3.5 K and 4.2 K, respectively, thanks to the effect of SIC. The eC stress coefficient index γ (ratio between eC temperature change and applied stress) for strains of 2-5 and 4-7 are γ2-5=4.4 K MPa(-1) and γ4-7=1.6 K MPa(-1), respectively, demonstrating the advantage of the strain regime 2-5. Finally, a high-cycle test up to 1.7×10(5) cycles is successfully applied to the NR sample with very little degradation of eC properties, constituting an important step towards cooling applications.This article is part of the themed issue 'Taking the temperature of phase transitions in cool materials'.

  13. ENHANCEMENT OF RESISTANCE TO OXIDATIVE DEGRADATION OF NATURAL RUBBER THROUGH LATEX DEGRADATION

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    A fully characterised natural rubber latex was subjected to mechanical degradation by stirring at intervals. The resistance to oxidative degradation of the different samples were studied by measuring the Plasticity retention indices (PRI).The results show that there is an enhancement of the PRI from 57% for the undegraded rubber to 79% for the one-hour degraded sample. Further degradation resulted in decrease of PRI as time of degradation increased. Therefore, the one-hour degraded sample is a special rubber with high oxidation resistance which is of great importance in engineering.

  14. Mechanical Properties of Injection Molded and Compression Molded Samples from Nature-Butadiene Rubber

    Directory of Open Access Journals (Sweden)

    Skrobak Adam

    2016-01-01

    Full Text Available The aim of this paper is to show what extent there is an impact on the mechanical properties (tensile strength and tear strength of a standardized testing sample made of rubber compound based on nature rubber and butadiene rubber produced by injection molding in comparison with a sample produced by classic preparation (cutting out a compression molded plate according to the standard ISO 23529. For realization of this study it was necessary to design and produce an injection mold for all types testing samples. Subsequently, mechanical properties such as the tensile stress-strain and tear strenght of compression molded samples and injection molded samples were studied, compared and discussed.

  15. 割胶制度对天然橡胶胶乳成份及橡胶性能影响的研究进展%Research Progress of Components and Properties of Natural Rubber Latex on Tapping System

    Institute of Scientific and Technical Information of China (English)

    廖小雪; 吴翠; 廖双泉; 陈荣凤

    2011-01-01

    Tapping system of rubber trees were summarized in this paper.Effect of physiological conditions of the rubber tree, non-rubber component of latex, concentration of latex, performance of colloid latex and performance of rubber film on different tapping systems were introduced.Characteristic of low frequency new tapping system and high frequency old tapping system was analyzed, which was helpful to the further study about reform of tapping system.%概述了国内外割胶制度,介绍了不同割胶制度对橡胶树生理、胶乳非胶成份、胶乳浓度、橡胶胶乳胶体性能及胶乳胶膜性能的影响,对比分析了低频新割制与高频旧割制的特点,对割胶制度改革的推进具有一定的指导意义.

  16. Degradation of non-vulcanized natural rubber - renewable resource for fine chemicals used in polymer synthesis

    Directory of Open Access Journals (Sweden)

    Alexander Fainleib

    2013-01-01

    Full Text Available In the current scenario, there is growing interest in the products of degradation of rubber (natural and synthetic for specific applications in different industry sectors, whose benefits in replacing conventionally used products are mainly related to sustainability. Since the degradation products of rubber can be used in different areas, several research groups may have the interest aroused by these products, but are not familiar with the aspects related to the chemical behavior of rubber. This review aims to bring together the key information in the published literature on the degradation of natural rubber, emphasizing metatheses reactions, oxidative damage and splitting of the double bond, in order to serve as a reference source for researchers from different fields interested in obtaining such kind of products. The structures and properties as well as additional chemical transformations resulting in oligomers of isoprene, functionalised oligomers and polymers based on both are also described.

  17. Analysis of Toxicity of Ceramic Nanoparticles and Functional Nanocomposites Based on Vulcanized Natural Rubber

    Directory of Open Access Journals (Sweden)

    Bellucci Felipe Silva

    2015-01-01

    Full Text Available Nanocomposites are multiphase materials of which, at least one of the phases, has a dimension smaller than 100 nm. These materials have attracted technological and scientific interest due to their multifunctional characteristics and potential, which allow them to combine unique properties which are not found in traditional commercial materials, such as natural rubber alone. The objective of this work is to analyse the toxicity of nanoparticles and nanocomposites when applied to mammal cells in order to obtain bioactive agents, as well as to evaluate the potential to be applied in biological systems. Ferroelectric ceramic nanoparticles of KSr2Nb5O15 (KSN and paramagnetic ceramic nanoparticles Ni0.5Zn0.5Fe2O4 (NZF were prepared and utilized to produce functional and multifunctional nanocomposites based on vulcanized natural rubber (NR/KSN and NR/NZF with different nanoparticle concentrations. For both kinds of nanoparticles and both classes of nanocomposites, independently of the nanoparticle concentration, it is not possible to observe any reduction of the cellular viability until the incubation time is finished. In this way, these results point to the possibility of using these nanoparticles and nanocomposites, from the toxicity point of view, as bioactivity agents in biological systems based on mammalian cells.

  18. Viscoelastic and thermal properties of woven sisal fabric reinforced natural rubber biocomposites

    CSIR Research Space (South Africa)

    John, MJ

    2009-01-01

    Full Text Available P.O. Kottayam, Kerala, India. -686 560 3 Central Power Research Institute, Polymer Laboratory, Bangalore, India-560 080. Abstract Textile- rubber biocomposites were prepared by reinforcing natural rubber with woven sisal fabric...-matrix interface. *Corresponding author E-mail: mjohn@csir.oc.za,mayajacobkunnel@yahoo.com Page 1 of 27 John Wiley & Sons, Inc. Journal of Applied Polymer Science For Peer Revie w 2 1. INTRODUCTION Developments in composite technology have...

  19. Effect of Ingredient Loading on Surface Migration Kinetics of Additives in Vulcanized Natural Rubber Compounds

    Directory of Open Access Journals (Sweden)

    Bryan B. Pajarito

    2014-12-01

    Full Text Available Surface migration kinetics of chemical additives in vulcanized natural rubber compounds were studied as function of ingredient loading. Rubber sheets were compounded according to a 212-8 fractional factorial design of experiment, where ingredients were treated as factors varied at two levels of loading. Amount of migrated additives in surface of rubber sheets was monitored through time at ambient conditions. The maximum amount and estimated rate of additive migration were determined from weight loss kinetic curves. Attenuated total reflection–Fourier transform infrared (ATR-FTIR spectroscopy and optical microscopy were used to characterize the chemical structure and surface morphology of sheet specimens during additive migration. ANOVA results showed that increased loading of reclaimed rubber, CaCO3, and paraffin wax signif icantly decreased the maximum amount of additive migration; by contrast, increased loading of used oil, asphalt, and mercaptobenzothiazole disulphide (MBTS increased the maximum amount. Increased loading of sulfur, diphenylguanidine (DPG, and paraffin wax significantly decreased the additive migration rate; increased loading of used oil, asphalt, and stearic acid elicited an opposite effect. Comparison of ATRFTIR spectra of migrated and cleaned rubber surfaces showed signif icant variation in intensity of specif ic absorbance bands that are also present in infrared spectra of migrating chemicals. Paraffin wax, used oil, stearic acid, MBTS, asphalt, and zinc stearate were identified to bloom and bleed in the rubber sheets. Optical micrographs of migrated rubber surfaces revealed formation of white precipitates due to blooming and of semi-transparent wet patches due to bleeding.

  20. Radiation prevulcanized natural rubber latex: Cytotoxicity and safety evaluation on animal

    Science.gov (United States)

    Keong, C. C.; Zin, W. M. Wan; Ibrahim, P.; Ibrahim, S.

    2010-05-01

    Radiation prevulcanized natural rubber latex (RVNRL) was claimed to be more user friendly than natural rubber latex prevulcanized by sulphur curing system. The absence of Type IV allergy inducing chemicals in RVNRL make it a suitable material for manufacturing of many kinds of latex products, especially those come into direct contact with users. This paper reveals and discusses the findings of cytotoxicity test and safety evaluation on animal for RVNRL. The test was done on RVNRL films prepared by coagulant dipping method and RVNRL dipped products produced by latex dipped product manufacturers. Cytotocixity test was carried out on mammalian cell culture American Type Culture Collection CCL 81, Vero. Results indicated that no cytotoxic effect from RVNRL films and products was found on the cell culture. Two animal studies, namely dermal sensitization study and primary skin irritation study, were done on gloves made from RVNRL. Albino white guinea pigs were used as test subjects in dermal sensitization study and results showed no sensitization induced by the application of test material in the guinea pigs. Primary skin irritation study was done on New Zealand white rabbits and results showed that the product tested was not corrosive and was not a primary irritant

  1. Gentamicin sulfate-loaded porous natural rubber films for wound dressing.

    Science.gov (United States)

    Phaechamud, Thawatchai; Issarayungyuen, Pongsathorn; Pichayakorn, Wiwat

    2016-04-01

    Antimicrobial wound dressings have been developed for effectiveness of wound therapy. In this study, gentamicin sulfate was loaded into modified porous natural rubber films. The hydrophilic porous structure in natural rubber films was formed when the polar liquid such as glycerin or triethyl citrate and hydrophilic xanthan gum were blended. Film properties including morphology, drug release, water sorption and erosion, mechanical property, adhesive property, surface free energy, water vapor transmission rate, oxygen permeation, and antimicrobial activity were determined. The angiogenesis activity of films was investigated using chick chorio-allantoic membrane assay. For the system containing triethyl citrate, bi-layers comprising of a dense-top layer and a high porous-bottom layer were observed. Xanthan gum enhanced the water sorption capacity and modified to obtain the optimum rate of the drug release from the film. The developed film topography with dense-top layer induced the low adhesive property, water vapor and oxygen permeability whereas demonstrated good antimicrobial activities against Staphylococcus aureus and Pseudomonas aeruginosa with angiogenic activity. Therefore it had the potential use for medicated wound dressing.

  2. Radiation prevulcanized natural rubber latex: Cytotoxicity and safety evaluation on animal

    Energy Technology Data Exchange (ETDEWEB)

    Keong, C C; Zin, W M Wan; Ibrahim, P; Ibrahim, S, E-mail: chai@nuclearmalaysia.gov.my [Malaysian Nuclear Agency, Bangi, 43000 Kajang, Selangor (Malaysia)

    2010-05-15

    Radiation prevulcanized natural rubber latex (RVNRL) was claimed to be more user friendly than natural rubber latex prevulcanized by sulphur curing system. The absence of Type IV allergy inducing chemicals in RVNRL make it a suitable material for manufacturing of many kinds of latex products, especially those come into direct contact with users. This paper reveals and discusses the findings of cytotoxicity test and safety evaluation on animal for RVNRL. The test was done on RVNRL films prepared by coagulant dipping method and RVNRL dipped products produced by latex dipped product manufacturers. Cytotocixity test was carried out on mammalian cell culture American Type Culture Collection CCL 81, Vero. Results indicated that no cytotoxic effect from RVNRL films and products was found on the cell culture. Two animal studies, namely dermal sensitization study and primary skin irritation study, were done on gloves made from RVNRL. Albino white guinea pigs were used as test subjects in dermal sensitization study and results showed no sensitization induced by the application of test material in the guinea pigs. Primary skin irritation study was done on New Zealand white rabbits and results showed that the product tested was not corrosive and was not a primary irritant

  3. Microbial scission of sulfide linkages in vulcanized natural rubber by a white rot basidiomycete, Ceriporiopsis subvermispora.

    Science.gov (United States)

    Sato, Shin; Honda, Yoichi; Kuwahara, Masaaki; Kishimoto, Hiroyuki; Yagi, Noriko; Muraoka, Kiyoshige; Watanabe, Takashi

    2004-01-01

    A white rot basidiomycete, Ceriporiopsis subvermispora, degraded vulcanized natural rubber (NR) sheets on a wood medium. The fungus decreased the total sulfur content of the rubber by 29% in 200 days, accompanied by the cleavage of sulfide bonds between polyisoprene chains. X-ray photoelectron spectroscopy (XPS) demonstrated that C. subvermispora reduced the frequency of S-C bonds by 69% with a concomitant formation of S-O bonds during the culture period. Dipolar decoupling/magic angle spinning (DD/MAS) solid state 13C NMR revealed that the fungus preferentially decomposed monosulfide bonds linked to a cis- and trans-1,4-isoprene backbone but the cleavage of polysulfide bonds was also observed. In contrast, no decrease in weight or devulcanization of rubber was observed in cultures of a white rot fungus, Dichomitus squalens. The oxidative cleavage of sulfide bonds by C. subvermispora demonstrates that ligninolytic basidiomycetes are potential microbes for the biological devulcanization of rubber products.

  4. Studies on the Transport of Aromatic Solvents through Filled Natural Rubber

    Directory of Open Access Journals (Sweden)

    Isaac O. Igwe

    2012-01-01

    Full Text Available The transport of three aromatic solvents (benzene, toluene and xylene through snail shell powder filled natural rubber was studied at 313, 333, and 353 K by conventional weight-gain experiments. The effects of snail shell powder content, particle size, nature of solvent, and temperature on the transport characteristics of natural rubber were determined. The estimated Arrhenius activation energies for the processes of sorption, diffusion, and permeation showed that the activation energies were highest in xylene at all the filler contents investigated. The calculated enthalpies, and entropies of sorption were all positive for the solvents investigated. Similarly, the change in the estimated free energies of sorption were all positive; an indication of the non-spontaneity of the solubility of snail shell powder filled natural rubber in the aromatic solvents at 313 k.

  5. Diclofenac Potassium Transdermal Patches Using Natural Rubber Latex Biomembranes as Carrier

    Directory of Open Access Journals (Sweden)

    Natan Roberto de Barros

    2015-01-01

    Full Text Available The aim of this study was to design a compound transdermal patch containing diclofenac potassium (Dic-K using natural rubber latex (NRL biomembrane. The NRL from Hevea brasiliensis is easily manipulated and low cost and presents high mechanical resistance. It is a biocompatible material which can stimulate natural angiogenesis and is capable of adhering cells on its surface. Recent researches have used the NRL for Transdermal Drug Delivery Systems (TDDSs. Dic-K is used for the treatment of rheumatoid arthritis and osteoarthritis and pain relief for postoperative and posttraumatic cases, as well as inflammation and edema. Results showed that the biomembrane can release Dic-K for up to 216 hours. The kinetics of the Dic-K release could be fitted with double exponential function. X-ray diffraction and Fourier Transform Infrared (FTIR spectroscopy show some interaction by hydrogen bound. The results indicated the potential of the compound patch.

  6. Application of gamma irradiation for incorporation of rubber powder in the formulations of EPDM and natural rubber; Aplicacao da radiacao gama para incorporacao do po de borracha em formulacoes de borracha natural e EPDM

    Energy Technology Data Exchange (ETDEWEB)

    Kiyan, Ludmila Y.P.; Parra, Duclerc Fernandes; Lugao, Ademar Benevolo, E-mail: ludmilapozzo@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP/CQMA), Sao Paulo, SP (Brazil). Centro de Quimica e Meio Ambiente

    2013-07-01

    The objective of this work was to study the behavior of the recycling of rubber burrs in form of powder, of the rubber industry from EPDM rubber powder and natural rubber with SBR. The rubber powder was irradiated and reused in rubber artifacts formulations for classical vulcanization. The processed material was irradiated using a {sup 60}Co source in doses of 50, 100, 150 and 200 kGy and a dose rate of 5 kGy s-1 at room temperature. The radiation created devulcanization active sites for subsequent integration of the material (rubber powder) in formulations of commercial use. The processes were compared and their products characterized by analytical methods of the physical properties such as strength and elongation. Satisfactory results were found, noting a major spin-off of EPDM chain demonstrated by increased elongation.

  7. DURABILITY OF GREEN CONCRETE WITH TERNARY CEMENTITIOUS SYSTEM CONTAINING RECYCLED AGGREGATE CONCRETE AND TIRE RUBBER WASTES

    Directory of Open Access Journals (Sweden)

    MAJID MATOUQ ASSAS

    2016-06-01

    Full Text Available All over the world billions of tires are being discarded and buried representing a serious ecological threat. Up to now a small part is recycled and millions of tires are just stockpiled, landfilled or buried. This paper presents results about the properties and the durability of green concrete contains recycled concrete as a coarse aggregate with partial replacement of sand by tire rubber wastes for pavement use. Ternary cementious system, Silica fume, Fly ash and Cement Kiln Dust are used as partial replacement of cement by weight. Each one replaced 10% of cement weight to give a total replacement of 30%. The durability performance was assessed by means of water absorption, chloride ion permeability at 28 and 90 days, and resistance to sulphuric acid attack at 1, 7, 14 and 28 days. Also to the compression behaviors for the tested specimens at 7, 14, 28 and 90 days were detected. The results show the existence of ternary cementitious system, silica fly ash and Cement Kiln Dust minimizes the strength loss associated to the use of rubber waste. In this way, up to 10% rubber content and 30% ternary cementious system an adequate strength class value (30 MPa, as required for a wide range of common structural uses, can be reached both through natural aggregate concrete and recycled aggregate concrete. Results also show that, it is possible to use rubber waste up to 15% and still maintain a high resistance to acid attack. The mixes with 10%silica fume, 10% fly ash and 10% Cement Kiln Dust show a higher resistance to sulphuric acid attack than the reference mix independently of the rubber waste content. The mixes with rubber waste and ternary cementious system was a lower resistance to sulphuric acid attack than the reference mix.

  8. Shear Strength of Single Lap Joint Aluminium-Thermoplastic Natural Rubber (Al-TPNR) Laminated Composite

    Science.gov (United States)

    Muzakkar, M. Z.; Ahmad, S.; Yarmo, M. A.; Jalar, A.; Bijarimi, M.

    2013-04-01

    In this work, we studied the effect of surface treatment on the aluminium surface and a coupling agent to improve adhesion between aluminium with organic polymer. Thermoplastic natural rubber (TPNR) matrix was prepared by melt blending of natural rubber (NR), liquid natural rubber (LNR) compatibilizer, linear low density polyethylene (LLDPE) and polyethylene grafted maleic anhydride (PE-g-MAH). The PEgMAH concentration used was varied from 0% - 25%. In addition, the aluminium surface was pre-treated with 3-glycidoxy propyl trimethoxy silane (3-GPS) to enhance the mechanical properties of laminated composite. It was found that the shear strength of single lap joint Al-TPNR laminated composite showing an increasing trend as a function of PE-g-MAH contents for the 3-GPS surface treated aluminium. Moreover, the scanning electron microscope (SEM) revealed that the strength improvement was associated with the chemical state of the compound involved.

  9. New green polymeric composites based on hemp and natural rubber processed by electron beam irradiation.

    Science.gov (United States)

    Stelescu, Maria-Daniela; Manaila, Elena; Craciun, Gabriela; Dumitrascu, Maria

    2014-01-01

    A new polymeric composite based on natural rubber reinforced with hemp has been processed by electron beam irradiation and characterized by several methods. The mechanical characteristics: gel fraction, crosslink density, water uptake, swelling parameters, and FTIR of natural rubber/hemp fiber composites have been investigated as a function of the hemp content and absorbed dose. Physical and mechanical properties present a significant improvement as a result of adding hemp fibres in blends. Our experiments showed that the hemp fibers have a reinforcing effect on natural rubber similar to mineral fillers (chalk, carbon black, silica). The crosslinking rates of samples, measured using the Flory-Rehner equation, increase as a result of the amount of hemp in blends and the electron beam irradiation dose increasing. The swelling parameters of samples significantly depend on the amount of hemp in blends, because the latter have hydrophilic characteristics.

  10. New Green Polymeric Composites Based on Hemp and Natural Rubber Processed by Electron Beam Irradiation

    Directory of Open Access Journals (Sweden)

    Maria-Daniela Stelescu

    2014-01-01

    Full Text Available A new polymeric composite based on natural rubber reinforced with hemp has been processed by electron beam irradiation and characterized by several methods. The mechanical characteristics: gel fraction, crosslink density, water uptake, swelling parameters, and FTIR of natural rubber/hemp fiber composites have been investigated as a function of the hemp content and absorbed dose. Physical and mechanical properties present a significant improvement as a result of adding hemp fibres in blends. Our experiments showed that the hemp fibers have a reinforcing effect on natural rubber similar to mineral fillers (chalk, carbon black, silica. The crosslinking rates of samples, measured using the Flory-Rehner equation, increase as a result of the amount of hemp in blends and the electron beam irradiation dose increasing. The swelling parameters of samples significantly depend on the amount of hemp in blends, because the latter have hydrophilic characteristics.

  11. Synergistic effect of plasma-modified halloysite nanotubes and carbon black in natural rubber-butadiene rubber blend

    NARCIS (Netherlands)

    Poikelispaa, Minna; Das, Amit; Dierkes, Wilma; Vuorinen, Jyrki

    2013-01-01

    Halloysite nanotubes (HNTs) were investigated concerning their suitability for rubber reinforcement. As they have geometrical similarity with carbon nanotubes, they were expected to impart a significant reinforcement effect on the rubber compounds but the dispersion of the nanofillers is difficult.

  12. Development and Characterization of Polymer Eco-Composites Based on Natural Rubber Reinforced with Natural Fibers

    Directory of Open Access Journals (Sweden)

    Maria-Daniela Stelescu

    2017-07-01

    Full Text Available Natural rubber composites filled with short natural fibers (flax and sawdust were prepared by blending procedure and the elastomer cross-linking was carried out using benzoyl peroxide. The microbial degradation of composites was carried out by incubating with Aspergillus niger recognized for the ability to grow and degrade a broad range of substrates. The extent of biodegradation was evaluated by weight loss and cross-linking degree study of composites after 2 months incubation in pure shake culture conditions. Scanning electron microscopy (SEM and Fourier transform infrared spectroscopy (FT-IR have proved to be precious and valuable instruments for morphological as well as structural characterization of the composites before and after incubation with Aspergillus niger.

  13. Thermal and mechanical behavior of rubber systems

    Science.gov (United States)

    Macon, David James

    The study of the physical behavior of rubbery materials is motivated by the desire to use these materials in a variety of environments, different mechanical conditions, and at different temperatures. For this to be possible, accurate testing conditions and modeling schemes need to be devised. These tests can be difficult to perform and existing mathematical models often neglect several basic physical requirements. One model is the statistical thermodynamic approach for calculating the thermoelastic behavior of an ideal rubber network, which assumes affine deformation of crosslinked junctions and no internal energy change with isothermal deformation. Yet, when the same relations have been manipulated according to the laws of thermodynamics, an internal energy contribution is revealed. This result is an artifact of improperly referencing strain measures and elasticity coefficients with regard to temperature. When a proper strain reference state is selected, thermoelastic stress-strain-temperature relations result that are totally entropic yet reduce to the usual isothermal conditions. This work proposes a phenomenological model that accurately models existing thermoelastic data. Experimental methods to determine the entropic and energetic contributions to rubber elasticity usually focus on the force-temperature behavior of a uniaxial sample held at constant length. Ideally, these thermoelastic measurements would be made at constant volume. Measurements are made at constant pressure and require complex corrections. It is demonstrated that two dimensionally constrained membrane samples can overcome these difficulties. By using time-average vibrational holographic interferometry, the two principal stresses of a membrane in anisotropic biaxial extension can be directly determined as a function of temperature. This two dimensionally constrained stress-temperature response greatly simplifies the resulting mathematical relations and yields no difference between constant

  14. Mechanical and morphological properties of kenaf powder filled natural rubber latex foam

    Energy Technology Data Exchange (ETDEWEB)

    Karim, Ahmad Fikri Abdul, E-mail: a.fikri-89@yahoo.com; Ariff, Zulkifli Mohamad [School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Pulau Pinang (Malaysia); Ismail, Hanafi [Cluster for Polymer Composites (CPC), Science and Engineering Research Centre, Engineering Campus, Universiti Sains Malaysia,14300 Nibong Tebal, Pulau Pinang (Malaysia)

    2015-07-22

    This research is carried out by incorporate kenaf powder with natural rubber latex (NRL) compound and is foamed to make natural rubber latex foam (NRLF) by using a well known technique called Dunlop method. Different loading of kenaf powder was added to NRL compound and was foamed to make NRLF. The tensile properties, and morphology of kenaf filled NRLF was studied. Increase in kenaf loading reduced the tensile strength and elongation at break and of a compound. Modulus at 100% elongation of the compound increased with increased in filler loading. The morphological and micro structural characterization has been performed by using scanning electron microscopy (SEM)

  15. Pilot Scale Production of Irradiated Natural Rubber Latex and its Dipping Products

    Directory of Open Access Journals (Sweden)

    M. Utama

    2005-07-01

    Full Text Available One hundred and fifty kg natural rubber latex (NRL before and after concentration were added with 3 phr (part hundred ratio of rubber normal butyl acrylate, then the mixture were irradiated at 25 kGy by gamma rays of 60Co in pilot scale. The irradiated natural rubber latex (INRL were then being to use for producing rubber products such as condom, surgical gloves, and spygmomanometer in factory scale. The quality of INRL and rubber products such as : total solid content (TSC, dry rubber content (DRC, KOH, VFA and MST number, tensile strength, modulus, elongation at break, extractable protein content, and response against Type I allergy etc. were evaluated. The economic aspect for producing INRL by means of Gamma Irradiator (GI and Electron Beam Machine (EBM such as payback period (PP, net present value (NPV and internal rate return (IRR were calculated. The results showed that the latex properties of INRL such as DRC, TSC, KOH, VFA, and MST number are not only found to the requirement of the ISO 2004 standard but also the latex has low protein, lipid, and carbohydrate content. The physical and mechanical properties (tensile strength, modulus, and elongation at break of rubber dipping products such as condom, gloves, and sphygmomanometer are not only found to the requirement of ISO 4074, ISO 10282, and ANSI/AAMI SP-1994 standards, but also the allergic response tested clinical latex-sensitive protein allergen by ELISA test on gloves, and by SPT test on condom are found to be negative. It indicates that production of INRL or PVNRL or RVNRL by EBM 250 keV/10 mA, was more cheap than by using gamma γ irradiator 200 kCi, or sulfur vulcanization. The value of PBP (payback period was 2,1 years, NPV (net present value was 4,250 US $, PI (profitability index 1,06 and IRR (internal rate of returns was 25,0%.

  16. Grafting copolymerization of natural rubber with 2-hydroxyethyl methacrylate for plywood adhesion improvement

    Directory of Open Access Journals (Sweden)

    Yoopadee Promdum

    2009-10-01

    Full Text Available The graft copolymer of natural rubber (NR and 2-hydroxyethyl methacrylate (HEMA was prepared by seeded emulsion polymerization using cumene hydroperoxide (CHP and tetraethylene pentamine TEPA as an initiator system. The structures of the copolymers were characterized by FT-IR and 1H-NMR spectroscopy techniques. The adhesion properties of NR-g-HEMA were examined. The effects of monomer concentration, initiator concentration, reaction temperature,reaction time and the agitation speed on grafting and grafting efficiency were investigated. It was found that the optimumconditions for preparing NR-g-HEMA when 5 phr of HEMA with 0.15mol% of initiator was used were 60oC for 90 min under agitation speed of 50 rpm. Furthermore, the adhesion properties to plywood of the graft copolymers are higher than those of original NR.

  17. Mechanical characterization and morphology of polylactic acid /liquid natural rubber filled with multi walled carbon nanotubes

    Science.gov (United States)

    Ali, Adilah Mat; Ahmad, Sahrim Hj.

    2013-11-01

    In this paper the polymer nanocomposite of multi-walled carbon nanotubes (MWCNTs) nanoparticles was incorporated with polylactic acid (PLA) and liquid natural rubber (LNR) as compatibilizer were prepared via melt blending method. The effect of MWCNTs loading on the tensile and impact properties of nanocomposites was investigated. The result has shown that the sample with 3.5 wt % of MWCNTs exhibited higher tensile strength, Young's modulus and impact strength. The elongation at break decreased with increasing percentage of MWCNTs. The SEM micrographs confirmed the effect of good dispersion of MWCNTs and their interfacial bonding in PLA/LNR composites. The improved dispersion of MWCNTs can be obtained due to altered interparticle interactions, MWCNTs-MWCNTs and MWCNTs-matrix networks are well combined to generate the synergistic effect of the system as shown by SEM micrographs which is improved the properties significantly.

  18. Properties of natural rubber/attapulgite composites prepared by latex compounding method: Effect of filler loading

    Energy Technology Data Exchange (ETDEWEB)

    Muttalib, Siti Nadzirah Abdul, E-mail: sitinadzirah.amn@gmail.com; Othman, Nadras, E-mail: srnadras@usm.my; Ismail, Hanafi, E-mail: ihanafi@usm.my [School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, Pulau Pinang (Malaysia)

    2015-07-22

    This paper reports on the effect of filler loading on properties of natural rubber (NR)/attapulgite (ATP) composites. The NR/ATP composites were prepared by latex compounding method. It is called as masterbatch. The masterbatch was subsequently added to the NR through melt mixing process. The vulcanized NR/ATP composites were subjected to mechanical, swelling and morphological tests. All the results were compared with NR/ATP composites prepared by conventional system. The composites from masterbatch method showed better results compared to composites prepared by conventional method. They have higher tensile properties, elongation at break and tear strength. The images captured through scanning electron microscopy test revealed the improvement of tensile strength in masterbatch NR/ATP composites. It can be seen clearly that masterbatch NR/ATP have better filler dispersion compared to conventional method NR/ATP composites.

  19. Preparation and Structural Characterization of Hydroxylethyl Methacrylate Grafted Natural Rubber Latex

    Directory of Open Access Journals (Sweden)

    Feiyun Wei

    2014-06-01

    Full Text Available The graft copolymer with semi-interpenetrating polymer networks (semi-IPNs from 2-hydroxyethyl methacrylate (HEMA and natural rubber (NR latex was prepared using cumene hydroperoxide and tetraethylene pentamine redox initiator system. The changes of grafting ratios and grafting efficiency with the reaction time and temperature, the concentration of crosslinking agent, initiator and monomer were investigated. The appropriate amounts of crosslinking agent (0.1phr, initiator (0.2phr and monomer (20phr and the optimum reaction conditions of 16ºC×8h were determined. The swelling temperature and times of monomers against NR latex particles were found to be significant for the grafting copolymerization and the appropriate swelling conditions were 16ºC×20h. The water contact angle measurement and platelet adhesion evaluation indicated that the hydrophilicity and blood compatibility of NR latex could be improved by grafting copolymerization with HEMA.

  20. Seismic fragility of a highway bridge in Quebec retrofitted with natural rubber isolators

    Directory of Open Access Journals (Sweden)

    G. H. Siqueira

    Full Text Available This paper presents fragility curves for the evaluation of a highway bridge retrofitted with seismic isolator devices. The object of this study is the Chemin des Dalles bridge over Highway 55 located in Trois-Rivières in Quebec, Canada. A series of synthetic ground motions time histories compatible with eastern Canada are used to capture the uncertainties related to the hazard. The seismic isolator model represents natural rubber bearing placed under the longitudinal girders over the bents and the abutments of the bridge. NRB isolators are placed in these locations to uncouple the movement of the superstructure and the infrastructure, increasing the flexibility of the system and decreasing the forces transmitted to the infrastructure. Finally, a set of fragility curves for the as-built and retrofitted models are compared to evaluate the effectiveness of seismic isolation to decrease the seismic vulnerability of this bridge.

  1. Securing the future of natural rubber – an American tire and bio-energy platform from guayule

    Science.gov (United States)

    There is a high level of interest in alternative sources of natural rubber for the tire industry due to both the price and supply volatility of Hevea brasiliensis. The guayule plant (Parthenium argentatum) has served as a major source of domestic natural rubber in the early 20th century and is being...

  2. Effect of Spray Drying on Protein Content of Natural Rubber Serum (NRS

    Directory of Open Access Journals (Sweden)

    I. Aimi Izyana and M.N. Zairossani

    2011-12-01

    Full Text Available Natural rubber latex comprises approximately 70% natural rubber serum (NRS which is the aqueous part of the latex. The NRS is made up of mainly water and non-rubber components; sugar, protein and other lipids. The protein component of the NRS is separated using membrane separation and spray dried whereby the amino acid and protein content was monitored during the process. The optimum drying temperatures were first determined to obtain the maximum recovery of the protein powder, whereby the amino acid content was approximately 40 times that of the feed. The production of protein powder from NRS increases the rubber industry's competitiveness through value addition to the previously discarded NRS but also to the processing industry. NRS protein powder has a great opportunity to be developed as an alternative protein source.ABSTRAK: Susu getah asli mengandungi lebih kurang 70% serum getah asli (natural rubber serum (NRS iaitu bahagian susu getah yang berair. NRS sebahagian besarnya merupakan air dan komponen bukan getah; gula, protein dan lipid-lipid lain. Komponen protein NRS dipisahkan dengan menggunakan membran pemisah dan kaedah kering semburan dimana asid amino dan kandungan protein dipantau semasa proses tersebut. Pada mulanya, suhu pengeringan optimum ditentukan untuk mendapatkan hasil maksima serbuk protein, dimana kandungan asid amino adalah lebih kurang 40 kali suapan. Penghasilan serbuk protein daripada NRS meningkatkan daya saing industri getah dan industri pemprosesan menerusi pertambahan nilai terhadap NRS yang sebelum ini hanya dibuang. Serbuk protein NRS mempunyai peluang besar untuk dimajukan sebagai sumber protein alternatif.KEY WORDS:  protein, spray dry, natural rubber serum.

  3. A study on nonlinear finite element analysis of laminated rubber bearings. Pt.1. Development of evaluation method for mechanical properties of laminated rubber bearings for horizontal base isolation system considering volumetric deformation of rubber material

    Energy Technology Data Exchange (ETDEWEB)

    Matsuda, Akihiro; Ohtori, Yasuki; Yabana, Shuichi; Hirata, Kazuta [Central Research Inst. of Electric Power Industry, Abiko, Chiba (Japan). Abiko Research Lab

    1999-04-01

    The purpose of this research is to develop the evaluation method for mechanical properties of laminated rubber bearings by nonlinear finite element method (FEM) considering the volumetric deformation of natural rubber material. Relationship between pressure and volumetric strain of the natural rubber is obtained from the volumetric tests and is introduced into user-subroutine of the FEM code (ABAQUS). Finite element analyses of natural rubber bearings (NRB) and the natural rubber bearing with lead plug (LRB) are carried out. The results may be summarized as follows; 1) Horizontal, vertical stiffness and effect of shear deformation on vertical stiffness of natural rubber bearings that have various shape are simulated with enough accuracy. 2) Horizontal and vertical stiffness of LRB are also simulated well. (author)

  4. Extractable protein of radiation vulcanized natural rubber latex

    Energy Technology Data Exchange (ETDEWEB)

    Soebianto, Y.S. [Center for Research and Development of Isotopes and Radiation Technology, BATAN, Jakarta (Indonesia); Upul, R.M. [Rubber Research Institute of Sri Lanka, Ratmalana (Sri Lanka); Makuuchi, K.; Yoshii, F.; Kume, T. [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    2000-03-01

    A new method to reduce the protein level in the latex products by irradiation is reported. Water soluble protein (WSP) solution (10%) was added into radiation vulcanized NR latex (RVNRL) as much as 3 phr in three different processes: added to RVNRL, added to re-centrifuged RVNRL, and added to RVNRL followed by centrifugation. The protein content was determined by enhanced BCA method, and identified by SDS-PAGE analysis. Addition of WSP followed by centrifugation reduces EP up to the minimum protein detection, and shortens the leaching time to 20-30 min. SDS-PAGE analysis confirms the reduction of soluble protein in the serum phase, and disappearance of protein bands in the rubber extract. Protein-WSP interaction produces water soluble complex, and removed by centrifugation. The molecular weight of WSP dictates the efficiency of protein removal. (author)

  5. Protein influences on guayule and Hevea natural rubber sol and gel

    Science.gov (United States)

    Guayule (Parthenium argentatum) is under cultivation in the southwestern United States as an alternative source of natural rubber free from proteins that cause Type I latex allergies. However, since guayule lacks the protein-polymer interactions present in Hevea latex, its physical and chemical prop...

  6. Solvent-sensitive reversible stress-response of shape memory natural rubber.

    Science.gov (United States)

    Quitmann, Dominik; Gushterov, Nikola; Sadowski, Gabriele; Katzenberg, Frank; Tiller, Joerg C

    2013-05-01

    We found that constrained shape memory natural rubber (SMNR) generates mechanical stress when exposed to solvent vapor. When the solvent vapor is removed, the material reprograms itself. This process is reversible and the stress answer is proportional to the solvent vapor concentration. Further, the stress answer is specific to the solvent.

  7. Seasonal and clonal variations in technological and thermal properties of raw Hevea natural rubber

    Science.gov (United States)

    This study was undertaken over a ten-month period, under the environmental conditions within the state of Mato Grosso, Brazil, to evaluate the causes of variation in technological and thermal properties of raw natural rubber from different clones of Hevea brasiliensis (GT 1, PR 255, FX 3864 and RRIM...

  8. Decrease in the rate of sensitization and clinical allergy to natural rubber latex

    DEFF Research Database (Denmark)

    Blaabjerg, Michelle S B; Andersen, Klaus E; Bindslev-Jensen, Carsten

    2015-01-01

    BACKGROUND: In the 1980s, a striking increase in natural rubber latex (NRL) allergy was seen. Since then, many measures have been taken to prevent NRL allergy. OBJECTIVES: To investigate changes in the prevalence of NRL sensitization/clinical NRL allergy over time from 2002 to 2013. METHODS: All...

  9. ROLE OF SYNTHETIC ANTIOXIDANTS ON THE AGING PROPERTY OF ELECTRON BEAM IRRADIATED NATURAL RUBBER

    Institute of Scientific and Technical Information of China (English)

    M. E. Haque; K. Makuuchi; F. Yoshii; H. Mitomo

    2005-01-01

    The aging property of radiation vulcanized natural rubber was studied using various kinds of antioxidants. Aging test was done at 100℃ for various lengths of time. It was found that some antioxidants are excellent in preventing the oxidative degradation of the irradiated rubber. DAH (2,5-di-tert-amylhydroquinone) + CBP (2,2'-dihydroxy-3,3'-di(-methylcyclohexyl)-5,5'-dimethyl diphenyl methane) + P16 (tris(2,4-di-tert-butylphenyl)phosphate) in a proportion of (1:0.5:0.5)was found to be the best combination to achieve 100% retention of tensile strength.

  10. STUDIES ON NATURAL WEATHERING OF RATTAN POWDER-FILLED NATURAL RUBBER COMPOSITES

    Directory of Open Access Journals (Sweden)

    Komethi Muniandy,

    2012-07-01

    Full Text Available This article investigates the effect of natural weathering on mechanical and morphological properties of rattan powder-filled natural rubber (NR composites as a function of filler loading and silane coupling agent. The rattan powder samples in the range of 0 to 30 phr were compounded with NR using a laboratory size two-roll mill. The natural weathering test was carried out for six months. The degradation of the samples was evaluated by performing a tensile test, a Fourier transform infrared spectroscopy (FTIR, and a scanning electron microscopy (SEM test. The results indicated that after natural weathering, an increase in stress at 100% elongation (M100 can be seen for samples without the silane coupling agent, whilst M100 was reduced for samples with silane coupling agent. A drastic reduction in tensile strength and elongation at break were observed for all samples due to the photo-oxidation process that occurred during the degradation of the samples. The extent of degradation on the samples’ surfaces and the presence of oxygenated products were confirmed by SEM and FTIR studies, respectively.

  11. Positron Annihilation Study on Nickel and Iron Nano-Particles in Natural Rubber Composites

    Directory of Open Access Journals (Sweden)

    Emad H. Aly

    2011-01-01

    Full Text Available Problem statement: The effect of Ni and Fe nano-particles as a filler on the free volume properties Of Natural Rubber (NR was studied using Positron Annihilation Lifetime Spectroscopy (PALS. Approach: The PAL measurements revealed that the free volume properties are strongly affected by the amount and type of filler. Results: Particularly speaking, the free volume fraction dramatically decreased by increasing the filler content. Besides, the addition of nano-prticles created new positron trapping sites at filler-rubber interfaces. Furthermore, correlations were made between the free volume hole sizes (Vh and each of the mechanical and electrical properties successively. A negative correlation was observed between Vh and hardness in the Ni-rubber composites while a positive counterpart was found in the case of Fe-rubber composites. Finally, the polarity of the fillers, being higher than that of the rubber itself, leads to an increase in electrical parameters and an inhibition of o-Ps formation. Conclusion: These results indicate that the investigated composites are considered to be insulating materials as their conductivity values are in the order of an insulator range.

  12. Identification of natural rubber degradation gene in Rhizobacter gummiphilus NS21.

    Science.gov (United States)

    Kasai, Daisuke; Imai, Shunsuke; Asano, Shota; Tabata, Michiro; Iijima, So; Kamimura, Naofumi; Masai, Eiji; Fukuda, Masao

    2017-03-01

    A Gram-negative rubber-degrading bacterium, Rhizobacter gummiphilus NS21 grew and produced aldehyde metabolites on a deproteinized natural rubber (DPNR)-overlay agar medium forming a clearing zone. A transposon-insertion mutant, which had lost the ability to degrade DPNR, was isolated to identify the rubber degradation genes. Sequencing analysis indicated that the transposon was inserted into a putative oxygenase gene, latA. The deduced amino acid sequence of latA has 36% identity with that of roxA, which encodes a rubber oxygenase of Xanthomonas sp. strain 35Y. Phylogenetic analysis revealed that LatA constitutes a distinct group from RoxA. Heterologous expression in a Methylibium host and deletion analysis of latA indicated that the latA product is responsible for the depolymerization of DPNR. The quantitative reverse transcription-PCR analysis indicated that the transcription of latA is induced during the growth on DPNR. These results strongly suggest that latA is directly involved in the degradation of rubber in NS21.

  13. Styrene grafted natural rubber reinforced by in situ silica generated via sol–gel technique

    Energy Technology Data Exchange (ETDEWEB)

    Sittiphan, Torpong [Program of Petrochemistry and Polymer Sciences, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand); Prasassarakich, Pattarapan [Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand); Poompradub, Sirilux, E-mail: sirilux.p@chula.ac.th [Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand)

    2014-02-15

    Highlights: • Sol–gel reaction by NR latex was the absence of use of organic solvent and base catalyst. • Well dispersed in situ formed silica particles in the rubber matrix were obtained. • In situ silica was better to improve mechanical properties of rubber vulcanizates. -- Abstract: The filling of styrene graft natural rubber (ST-GNR) with in situ formed silica was performed using the sol–gel reaction via the latex solution method. The mechanical properties of ST-GNR/NR vulcanizate were improved when using the in situ formed silica to levels higher than those obtained with the commercial ex situ formed silica filled ST-GNR/NR vulcanizates at a comparable silica content of 12 parts by weight per hundred parts of rubber. Transmission electron microscopy analysis revealed that the in situ silica particles were small (∼40 nm diameter) and well dispersed, while the commercial silica particles were larger (∼60 nm diameter) and markedly agglomerated in the rubbery matrix. The mechanical properties of the composites prepared via both the solid rubber and latex solution methods were comparable.

  14. NANOMECHANICAL MAPPING OF CARBON BLACK REINFORCED NATURAL RUBBER BY ATOMIC FORCE MICROSCOPY

    Institute of Scientific and Technical Information of China (English)

    Toshio Nishi; Hideyuki Nukaga; So Fujinami; Ken Nakajima

    2007-01-01

    Atomic force microscopy (AFM) has the advantage of obtaining mechanical properties as well as topographic information at the same time. By analyzing force-distance curves measured over two-dimensional area using Hertzian contact mechanics, Young's modulus mapping was obtained with nanometer-scale resolution. Furthermore, the sample deformation by the force exerted was also estimated from the force-distance curve analyses. We could thus reconstruct a real topographic image by incorporating apparent topographic image with deformation image. We applied this method to carbon black reinforced natural rubber to obtain Young's modulus distribution image together with reconstructed real topographic image.Then we were able to recognize three regions; rubber matrix, carbon black (or bound rubber) and intermediate regions.Though the existence of these regions had been investigated by pulsed nuclear magnetic resonance, this paper would be the first to report on the quantitative evaluation of the interfacial region in real space.

  15. Reduction of cytotoxicity of natural rubber latex film by coating with PMMA-chitosan nanoparticles.

    Science.gov (United States)

    Kanjanathaworn, Nuttakun; Polpanich, Duangporn; Jangpatarapongsa, Kulachart; Tangboriboonrat, Pramuan

    2013-08-14

    Poly(methyl methacrylate) (PMMA) latex stabilized by chitosan (CS) oligomer was synthesized via the miniemulsion polymerization. By using 1% CS solution (in 0.1M acetic acid), the spherical PMMA-CS particles with an average size of 380 nm were obtained. The positive zeta potentials at pH 2-7 confirmed the presence of CS as the outermost layer of the latex particles. Therefore, these particles directly interacted with the indigenous non-rubbers at the surface of sulphur prevulcanized natural rubber (SPNR) film. The deposition of PMMA-CS particles caused an increase in surface roughness of the coated SPNR film as a function of latex concentration and immersion time. The simple coating of the rubber substrate with PMMA-CS particles effectively reduced the in vitro cytotoxicity on L-929 cells. This study would be, therefore, helpful for development of latex gloves designed for hypersensitive users.

  16. In vitro cytotoxicity evaluation of natural rubber latex film surface coated with PMMA nanoparticles.

    Science.gov (United States)

    Anancharungsuk, Waranya; Polpanich, Duangporn; Jangpatarapongsa, Kulachart; Tangboriboonrat, Pramuan

    2010-07-01

    In order to increase surface roughness of the sulphur-prevulcanized natural rubber (SPNR) film and, hence, decrease the direct contact between the rubber and skin, the poly(methyl methacrylate) (PMMA) latex particles were deposited onto the SPNR film grafted with polyacrylamide (SPNR-g-PAAm). The surface coverage of PMMA particles on the SPNR-g-PAAm increased with increasing latex immersion time, particle size and concentration. Prior to the in vitro cytotoxicity evaluation on L-929 fibroblasts, the SPNR and SPNR-g-PAAm coated with PMMA particles were extracted by using the culture medium. Results showed that the cytotoxicity effect could be significantly reduced by coating PMMA particles onto the rubber film. At the extract concentrations of < or =12.5% for 24h at 37 degrees C, no toxicity potential was detected. The study will be helpful for development of gloves designed for the hypersensitive person.

  17. Recycling Waste Natural Rubber Latex by Blending with Polystyrene - Characterization of Mechanical Properties

    Science.gov (United States)

    Boondamnoen, O.; Ohshima, M.; Azura, A. R.; Chuayjuljit, S.; Ariffin, A.

    Waste natural rubber latex was blended with polystyrene (WNRL/PS) for recycling. A mixture with a 50/50 ratio of rubber to PS was blended by an internal mixer (Haake) at 140 °C and 60 rpm. The PS became the matrix, and the WNRL was dispersed within the matrix. Dynamically vulcanized natural rubber/PS (NRv/PS) blends and natural rubber/PS (NR/PS) blends without vulcanization were also prepared in the same way for comparison. The tensile properties and morphologies of all blends were investigated. The crosslinking density was determined by using the Flory-Rehner equation. The experiments showed that the WNRL/PS blend exhibited a higher tensile strength, Young's modulus and crosslinking density, but a lower elongation at break, than the NRv/PS and NR/PS blends. SEM observations of the tensile fracture surface and TEM observations of the blend morphology indicated that the WNRL/PS blend needed a higher energy to break than the NRv/PS and NR/PS blends.

  18. Rubber and pulp plantations represent a double threat to Hainan's natural tropical forests.

    Science.gov (United States)

    Zhai, De-Li; Cannon, Charles H; Slik, J W Ferry; Zhang, Cui-Ping; Dai, Zhi-Cong

    2012-04-15

    Hainan, the largest tropical island in China, belongs to the Indo-Burma biodiversity hotspot and harbors large areas of tropical forests, particularly in the uplands. The Changhua watershed is the cradle of Hainan's main river and a center of endemism for plants and birds. The watershed contains great habitat diversity and is an important conservation area. We analyzed the impact of rubber and pulp plantations on the distribution and area of tropical forest in the watershed, using remote sensing analysis of Landsat images from 1988, 1995 and 2005. From 1988 to 1995, natural forest increased in area (979-1040 sq km) but decreased rapidly (763 sq km) over the next decade. Rubber plantations increased steadily through the study period while pulp plantations appeared after 1995 but occupied 152 sq km by 2005. Rubber and pulp plantations displace different types of natural forest and do not replace one another. Because pulp is not as profitable as rubber and existing pulp processing capacity greatly exceeds local supply, considerable pressure exists on remaining upland forests. We recommend for future management that these plantation forests be reclassified as 'industrial', making a clear policy distinction between natural and industrial forestry. Additionally, the local government should work to enforce existing laws preventing forest conversion on marginal and protected areas.

  19. Reinforcement of Natural Rubber with Bacterial Cellulose via a Latex Aqueous Microdispersion Process

    Directory of Open Access Journals (Sweden)

    Sirilak Phomrak

    2017-01-01

    Full Text Available Natural rubber (NR composites were reinforced with bacterial cellulose (BC to improve mechanical and physical properties. The natural rubber bacterial cellulose (NRBC composite films were prepared via a latex aqueous microdispersion process by a thorough mixing of BC slurry with natural rubber latex (NRL. The structural morphology and chemical and physical properties of NRBC composites were investigated. The hydrophilicity, opacity, and crystallinity of the NRBC composites were significantly enhanced because of the added BC. By loading BC at 80 wt.%, the mechanical properties, such as Young’s modulus and tensile strength, were 4,128.4 MPa and 75.1 MPa, respectively, which were approximately 2,580 times and 94 times those of pure NR films, respectively, whereas the elongation at break of was decreased to 0.04 of that of the NR film. Because of its high mechanical strength and thermal stability, the NRBC composites have potential uses as high mechanical strength rubber-based products and bioelastic packaging in many applications.

  20. Effect of processing methods on the mechanical properties of natural rubber filled with stearic acid modified soy protein particles

    Science.gov (United States)

    Natural rubber was reinforced with stearic acid modified soy protein particles prepared with a microfluidizing and ball milling process. Longer ball milling time tends to increase tensile strength of the rubber composites. Elastic modulus of the composites increased with the increasing filler concen...

  1. Silica-reinforced natural rubber for low rolling resistance, energy-saving tires: aspects of mixing, formulation and compatibilization

    NARCIS (Netherlands)

    Kaewsakul, W.

    2013-01-01

    Natural rubber (NR) is a renewable material, which combines excellent mechanical and dynamic properties. It has been and still is in use in a variety of applications, mostly in the form of filled vulcanizates. Silica filler technology used for rubber is relatively new, since silica can reinforce rub

  2. Silica-reinforced natural rubber for low rolling resistance, energy-saving tires: aspects of mixing, formulation and compatibilization

    NARCIS (Netherlands)

    Kaewsakul, Wisut

    2013-01-01

    Natural rubber (NR) is a renewable material, which combines excellent mechanical and dynamic properties. It has been and still is in use in a variety of applications, mostly in the form of filled vulcanizates. Silica filler technology used for rubber is relatively new, since silica can reinforce

  3. Vacuum coagulation of natural rubber latex and the properties of the produced natural raw rubber%真空凝固天然橡胶胶乳及其生胶性能

    Institute of Scientific and Technical Information of China (English)

    雷统席; 蒋盛军; 符乃方; 李鸿; 谢飞扬; 马洪泉

    2011-01-01

    在真空条件下,天然胶乳橡胶粒子会膨胀、破裂,从而引起天然胶乳的凝固.本研究首次将真空技术引入天然胶乳凝固领域.真空凝固天然胶乳可物理控速、凝固彻底、胶清清澈、污染低.与酸凝固天然胶乳的生胶及微生物凝固天然胶乳的生胶相比,真空凝固胶具备多孔、叠层结构,干燥失水快、抗氧指数(PRI)高、硫化速度较快,硫化后物理机械性能在3种硫化胶中最优.本研究为天然胶乳的凝固提供了一种新的物理方法.%Under vacuum natural rubber particles in natural rubber latex will expand, burst and coagulate. In this study, vacuum technology was applied to coagulate natural rubber latex. This vacuum coagulation of natural rubber latex could be controlled physically. The skim latex obtained as a byproduct during this procedure was cleaner than that obtained from other procedures; this procedure would therefore reduce pollution from latex processing. The natural raw rubber produced by vacuum coagulation had a porous and layered structure. Compared with the natural raw rubber coagulated by acid and microbiological methods, the natural raw rubber produced in this study was faster to dehydrate and vulcanize, and had a higher plasticity retention index. The vulcanized rubber from vacuum coagulation had better physical and mechanical properties than that prepared by acid or microbiological coagulation. The method developed in this work is a novel physical way to coagulate natural rubber latex.

  4. Reinforcing effect of plasma modified halloysite nanotubes in a carbon black filled natural rubber-butadien rubber matrix

    NARCIS (Netherlands)

    Poikelispaa, Minna; Das, Amit; Dierkes, Wilma; Vuorinen, Jyrki

    2011-01-01

    Rubber composites are generally produced by the direct incorporation of fillers like carbon black and/or silica into the rubber matrix. The incorporation of different types of nanofillers is the subject of recent research with the aim of preparing composites with special compositions and properties.

  5. How to Develop Rubber Production in Xishuangbanna Dai Autonomous Prefecture?

    Institute of Scientific and Technical Information of China (English)

    Huide; HUANG; Haolun; HUANG; Wanzhen; ZHANG

    2015-01-01

    The natural rubber planting area in Xishuangbanna Dai Autonomous Prefecture accounts for about 30% of rubber planting area in China. At the end of 2013,the rubber planting area in Xishuangbanna Dai Autonomous Prefecture was 29. 4 ha,the tapped rubber plantation area was 17. 49 ha,and the dry rubber production was 317000 t. Currently,the production and management level of rubber plantation has declined in Xishuangbanna Dai Autonomous Prefecture,the tapping technique is outdated,and the tapping technology management system is difficult to implement. Therefore,some ways can be employed to promote the development of rubber industry such as enhancing the operation and management level of rubber industry,organizing the rubber production team,and developing the new rubber farmers’ cooperatives.

  6. Modeling the temperature dependence of N-methylpyrrolidone permeation through butyl- and natural-rubber gloves.

    Science.gov (United States)

    Zellers, E T; Sulewski, R

    1993-09-01

    This paper describes the temperature dependence of N-methylpyrrolidone (NMP) permeation through gloves used in microelectronics fabrication facilities. One type of butyl-rubber glove (North B161), two types of natural-rubber gloves (Edmont Puretek and Ansell Pacific White), and a natural rubber/nitrile/neoprene-blend glove (Pioneer Trionic) were tested at four temperatures from 25-50 degrees C using the ASTM F739-85 permeation test method. The butyl-rubber glove showed no breakthrough after four hours of exposure at any temperature. The variations with temperature of measured breakthrough times (BT) and steady-state permeation rates (SSPR) for the other gloves were described well by Arrhenius relationships, with BT values decreasing by factors of 7-10 and SSPR values increasing by factors of 4-6 over the temperature range studied. Extrapolation to 70 and 93 degrees C, the temperatures at which degreasing is often performed, yielded BT values of rubber glove, following an initial exposure at 25 degrees C and air drying overnight, low levels of NMP vapor were detected off-gassing from the inner surfaces of the gloves. Experimental results were then compared to those expected from several permeation models. Estimates of the equilibrium solvent solubility, S, were calculated using a model based on three-dimensional solubility parameters. Estimates of the solvent diffusion coefficient, D, were obtained from correlations with either the solvent kinematic viscosity or the product of the Flory interaction parameter, chi, and the solvent molar volume. Combining these values of D and S in Fickian diffusion equations gave modeled BT estimates that were within 23% of experimental values over the temperature range examined. Modeled SSPR values were within 50% (typically within 25%) of experimental values. Another model based on a generalized Arrhenius relationship also provided useful but generally less accurate estimates of the changes in BT and SSPR values with temperature.

  7. In situ reactive compatibilization of natural rubber/acrylic-bentonite composites via peroxide-induced vulcanization

    Energy Technology Data Exchange (ETDEWEB)

    Fu, Lihua; Lei, Zhiwen [Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004 (China); Xu, Chuanhui, E-mail: xuhuiyee@gxu.edu.cn [Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004 (China); Chen, Yukun, E-mail: cyk@scut.edu.cn [The Key Laboratory of Polymer Processing Engineering, Ministry of Education, China(South China University of Technology), Guangzhou, 510640 (China)

    2016-02-15

    To achieve good interfacial interaction between fillers and rubber matrix is always a hot topic in rubber reinforcing industry. In this paper, acid activated bentonite (Bt) was alkalified to be alkaline calcium-bentonite (ACBt), then acrylic acid (AA) was employed to modify ACBt to obtain acrylic-bentonite (ABt). The results of Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) illustrated that acrylate groups were chemically boned onto the surface of Bt and the layer spacing of Bt was increased. During peroxide-induced vulcanization, in situ compatibilization of ABt was realized via the reaction between the unsaturated bonds of acrylate groups on the surface of Bt and the natural rubber (NR) chains. This resulted in an enhanced cross-linked network which contributed to the improved mechanical properties of NR/ABt composites. - Highlights: • Acrylate groups were chemically boned onto the surface of bentonite. • In situ compatibilization was realized via the reaction of acrylate group and NR. • ABt particles participated in forming the NR crosslink network. • A potential reinforcing material options for “white” rubber products.

  8. Development of a rubber elongation factor, surface-imprinted polymer-quartz crystal microbalance sensor, for quantitative determination of Hev b1 rubber latex allergens present in natural rubber latex products.

    Science.gov (United States)

    Sontimuang, Chonlatid; Suedee, Roongnapa; Canyuk, Bhutorn; Phadoongsombut, Narubodee; Dickert, Franz L

    2011-02-21

    Molecularly imprinted polymers (MIPs) for screening to detect rubber latex allergens (Hev b1) in natural rubber based products were designed as artificial recognition polymeric materials coated onto a quartz crystal microbalance (QCM). The polymers were prepared using a stamp imprinting procedure after mixing optimum amounts of methacrylic acid-vinylpyrrolidone-dihydroxyethylene bisacrylamide and Hev b1 latex allergen proteins, obtained from rubber gloves. QCM measurements showed that the resulting polymer layers after removal of the proteins used in their preparation could incorporate structures and features down to nanometer scale of protein templates into the imprinted polymer much better than a non-specific control polymer under controlled sensor conditions and an optimized polymerization process. This selective polymer but not the non-selective polymer clearly distinguished between the latex allergen Hev b1 and proteins such as lysozyme, ovalbumin and bovine serum albumin, with a selectivity factor of from 2 to 4, and the response of the rubber elongation factors by an astonishing factor of 12. The imprinted cavities recognized specific binding sites and could distinguish among related hevein latex allergenic proteins isolated from fresh natural rubber latex; Hev b1, Hev b2, and Hev b3 with a selectivity factor of from 4 to 6. The different QCM measurements obtained presumably reflected slightly different conformations and affinities to the MIP binding sites. The sensor layers selectively adsorbed Hev b1 within minutes in amounts ranging from 10 to 1500 μg L⁻¹ and with a detection limit of 1 μg L⁻¹. This work has demonstrated that this new sensor provides a fast and reliable response to natural rubber latex protein, even after being extracted from the matrix of rubber gloves.

  9. Dependence of Adhesion Property of Epoxidized Natural Rubber (ENR 25)/Ethylene-Propylene-Diene Rubber Blend Adhesives Crosslinked by Benzoyl Peroxide

    OpenAIRE

    B. T. Poh; Y. Y. Teh

    2014-01-01

    The loop tack, peel strength, and shear strength of crosslinked epoxidized natural rubber (ENR 25)/ethylene-propylene-diene rubber (EPDM) blend adhesives were investigated. Coumarone-indene resin, toluene, and benzoyl peroxide were used as the tackifier, solvent, and crosslinking agent, respectively, throughout the experiment. The adhesive was coated on a polyethylene terephthalate (PET) substrate using a SHEEN hand coater at 60 μm and 120 μm coating thickness. It was cured at 80°C for 30 min...

  10. Enhanced microactuation with magnetic field curing of magnetorheological elastomers based on iron–natural rubber nanocomposites

    Indian Academy of Sciences (India)

    M P Vasudevan; P M Sudeep; I A Al-Omari; Philip Kurian; P M Ajayan; T N Narayanan; M R Anantharaman

    2015-06-01

    The incorporation of nanoparticles of iron in a natural rubber matrix leads to flexible magnetorheological (MR) materials. Rod-shaped MR elastomers based on natural rubber and nanosized iron have been moulded both with and without the application of an external magnetic field during curing. These MR elastomer rods and filler material were characterized by X-ray powder diffraction, scanning electron microscopy and transmission electron microscopy. Magnetic properties were investigated by using vibrating sample magnetometry. Microactuation studies were carried ou t by employing a laser Doppler vibrometer. It is seen that microactuation of field cured samples have been enhanced by two times when compared with that of zero field cured samples. The effect of alignment of magnetic particles during field-assisted curing was also studied by using a dynamic mechanical analyzer. A plausible model is put forwarded to explain the observed enhancement of actuation for field cured samples.

  11. INFLUENCE OF THE VOLATILE FATTY ACID CONTENT TO RADIATION VULCANIZED NATURAL RUBBER LATEX (RVNRL

    Directory of Open Access Journals (Sweden)

    CHIRINOS, Hugo David

    2012-01-01

    Full Text Available Natural rubber latex is a dispersion of natural rubber particles in water. These particles are coated with aprotein layer which will stabilize the dispersion in water by forming an electric charge in the layer. Any differentcondition affecting this layer disturbs the stability of dispersion. Microorganism attack disturbs the protein layerand consequently the stability of the dispersion. By adding 1.2% by weight of NH3, the stability of the dispersioncan be improved. The fresh latex was irradiated by Co-60 with irradiation dose of 10, 20, 30, 40 and 100 kGy.The results showed a relationship between the volatile fatty acid content (VFA, product from microorganismattack on carbohydrate and the green strength or the physical properties of vulcanized film. Low VFA numbershowing a higher physical strength of the film either un-vulcanized or vulcanized. It appeared that the structurewas responsible in yielding a good physical property of the film.

  12. Robust and biodegradable polymer of cassava starch and modified natural rubber.

    Science.gov (United States)

    Riyajan, Sa-Ad

    2015-12-10

    The application of starch based materials for packaging purposes has attracted significant interest because they are both cheap and renewable resources. The study investigated the preparation and properties of a novel biopolymer sheet produced from a blend of maleated epoxidized natural rubber (MENR) and natural rubber-g-cassava starch (NR-g-CSt). The water resistance, toluene resistance and elongation at break of the polymer blend were enhanced after the addition of the MENR compared to pristine NR-g-CSt. The maximum tensile strength and thermal stability of the NR-g-CSt/MENR blend were found in the 100:50 NR-g-CSt:MENR blend. The novel films demonstrated good biodegradability in soil.

  13. Segmentation of scanning electron microscopy images from natural rubber samples with gold nanoparticles using starlet wavelets.

    Science.gov (United States)

    de Siqueira, Alexandre Fioravante; Cabrera, Flávio Camargo; Pagamisse, Aylton; Job, Aldo Eloizo

    2014-01-01

    Electronic microscopy has been used for morphology evaluation of different materials structures. However, microscopy results may be affected by several factors. Image processing methods can be used to correct and improve the quality of these results. In this article, we propose an algorithm based on starlets to perform the segmentation of scanning electron microscopy images. An application is presented in order to locate gold nanoparticles in natural rubber membranes. In this application, our method showed accuracy greater than 85% for all test images. Results given by this method will be used in future studies, to computationally estimate the density distribution of gold nanoparticles in natural rubber samples and to predict reduction kinetics of gold nanoparticles at different time periods.

  14. Influence of NdFeB Fillers on Tensile and Electromagnetic Properties of Natural Rubber

    Directory of Open Access Journals (Sweden)

    Puripat LERTSURAWAT

    2009-06-01

    Full Text Available Tensile and electromagnetic properties of hard magnetic natural rubber composites were studied. In a fabrication stage, neodymium-iron-boron (NdFeB magnets were recycled from electronic wastes, broken and then ball-milled for 1 - 3 h. The NdFeB powder was then incorporated into natural rubber (NR by a 2-roll mill technique. Since the NdFeB powder behaved as a non-reinforced filler, thus, it inhibited cross-linking and stress-induced recrystallization. Therefore, the cure time and the tensile strength of the NdFeB-NR composites were reduced compared to the control sample without magnetic fillers. The addition of NdFeB fillers improved the electrical permittivity of NR and the magnetic moment in NdFeB-NR composites could be measured by a fluxmeter.

  15. Reinforcing mechanisms of starch nanocrystals in a nonvulcanized natural rubber matrix.

    Science.gov (United States)

    Mélé, Patrice; Angellier-Coussy, Hélène; Molina-Boisseau, Sonia; Dufresne, Alain

    2011-05-09

    A phenomenological modeling approach was developed to try to understand the reinforcing mechanism of starch nanocrystals in a nonvulcanized natural rubber matrix. Natural rubber was not cross-linked to maintain the biodegradability of the biosourced materials. Nonlinear dynamic mechanical experiments highlighted the significant reinforcing effect of starch nanocrystals and the presence of the Mullins and Payne effects. Two models were used to predict the Payne effect considering that either filler-filler (Kraus model) or matrix-filler (Maier and Göritz model) interactions are preponderant. The use of the Maier and Goritz model demonstrated that phenomena of adsorption and desorption of NR chains on the filler surface governed nonlinear viscoelastic properties, even if the formation of a percolating network for filler contents >6.7 vol % was evidenced by the Kraus model.

  16. Simple green approach to reinforce natural rubber with bacterial cellulose nanofibers.

    Science.gov (United States)

    Trovatti, Eliane; Carvalho, Antonio J F; Ribeiro, Sidney J L; Gandini, Alessandro

    2013-08-12

    Natural rubber (NR) is a renewable polymer with a wide range of applications, which is constantly tailored, further increasing its utilizations. The tensile strength is one of its most important properties susceptible of being enhanced by the simple incorporation of nanofibers. The preparation and characterization of natural-rubber based nanocomposites reinforced with bacterial cellulose (BC) and bacterial cellulose coated with polystyrene (BCPS), yielded high performance materials. The nanocomposites were prepared by a simple and green process, and characterized by tensile tests, dynamical mechanical analysis (DMA), scanning electron microscopy (SEM), and swelling experiments. The effect of the nanofiber content on morphology, static, and dynamic mechanical properties was also investigated. The results showed an increase in the mechanical properties, such as Young's modulus and tensile strength, even with modest nanofiber loadings.

  17. Effect of epoxidation on 30% poly(methyl methacrylate)-grafted natural rubber polymer electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Nazir, Khuzaimah; Aziz, Ahmad Fairoz [Faculty of Applied Sciences, Universiti Teknologi MARA, 40450 Shah Alam, Selangor (Malaysia); Adam, Nurul Ilham [Faculty of Applied Sciences, Universiti Teknologi MARA, KampusTapah, 35400 Tapah Road, Tapah, Perak (Malaysia); Yahya, Muhd Zu Azhan [Faculty of Defence Sciences and Technology, Universiti Pertahanan Nasional Malaysia, Kem Sungai Besi, 57000 Kuala Lumpur (Malaysia); Ali, Ab Malik Marwan [Institute of Science, Universiti Teknologi MARA, 40450 Shah Alam, Selangor (Malaysia)

    2015-08-28

    Epoxidized 30% poly(methyl methacrylate)-grafted natural rubber (EMG 30) as a polymer host in solid polymer electrolytes (SPEs) has been investigated. EMG30 was synthesized via performicepoxidation method onto 30% poly(methyl methacrylate)-grafted natural rubber (MG30) and the formations of epoxy group were discussed. The EMG30 were characterized by proton nuclear magnetic resonance ({sup 1}HNMR) to investigate their chemical structure and differential scanning calorimeter to determine their crystallinity. A new peak in {sup 1}HNMR spectra (2.71 ppm) confirmed the appearance of epoxy group. SPE based on EMG30 doped with 40 wt% LiCF{sub 3}SO{sub 3} show the highest conductivity. The complexation between EMG30 and LiCF{sub 3}SO{sub 3} were confirmed by attenuated total reflection Fourier transform infrared (ATR-FTIR)

  18. An excellent ozone-resistant polymethylvinylsiloxane coating on natural rubber by thiol-ene click chemistry

    Directory of Open Access Journals (Sweden)

    N. Y. Ning

    2015-06-01

    Full Text Available Natural rubber (NR as renewable resource is a kind of cheap and versatile elastomer. A disadvantage of NR is that the ozone resistance is not good, which needs to be improved for its wider application. In this study, polymethylvinylsiloxane (PMVS coating on natural rubber (NR was realized for the first time by using thiol-ene click reaction under UV irradiation, simultaniously realizing the fast crosslinking of PMVS layer and the covalent crosslinking between PMVS layer and NR layer. As a result, a good interphase adhesion between PMVS coating and NR was obtained. The coating of the crosslinked PMVS layer on NR resulted in an obvious increase in the ozone resistance of NR. Our study provides a new and high efficient strategy to prepare elastomer materials with good ozone resistance.

  19. Evidence for chemical bond formation at rubber-brass interface: Photoelectron spectroscopy study of bonding interaction between copper sulfide and model molecules of natural rubber

    Science.gov (United States)

    Ozawa, Kenichi; Mase, Kazuhiko

    2016-12-01

    Strong adhesion between rubber and brass has been considered to arise mainly from the mechanical interaction, which is characterized by dendritic interlocking at the interface. In order to examine a possible contribution of the chemical interaction, chemical state analysis was carried out for model molecules of natural rubber (2-methyl-2-butene and isoprene) adsorbed on Cu2S, a key chemical species for adhesion, by means of photoelectron spectroscopy (PES). Absence of a C 1s PES component associated with C=C bonds and the appearance of adsorption-induced components in the S 2p region indicate that the molecules interact with the Cu2S surface via the C=C bond to form C-S covalent bonds. This proves that the chemical interaction certainly plays a role in rubber-brass adhesion along with the mechanical interaction.

  20. Physical-biopolymer characterization of polyhydroxybutyrate-co-hydroxyvalerate (PHBV) blended with natural rubber latex

    Energy Technology Data Exchange (ETDEWEB)

    Kuntanoo, K., E-mail: thip-kk@hotmail.com [Graduate School of Khon Kaen University, Khon Kaen, 40002 Thailand (Thailand); Promkotra, S., E-mail: sarunya@kku.ac.th [Department of Geotechnology, Faculty of Technology, Khon Kaen University, Khon Kaen 40002 Thailand (Thailand); Kaewkannetra, P., E-mail: paknar@kku.ac.th [Department of Biotechnology, Faculty of Technology, Khon Kaen University, Khon Kaen 40002 Thailand (Thailand)

    2015-03-30

    A biopolymer of polyhydroxybutyrate-co-hydroxyvalerate (PHBV) is blended with bio-based materials, natural rubber latex, to improve their microstructures. The various ratios between PHBV and natural rubber latex are examined to develop their mechanical properties. In general, physical properties of PHBV are hard, brittle and low flexible while natural rubber (NR) is presented itself as high elastic materials. Concentrations of the PHBV solution are constituted at 1%, 2% and 3% (w/v). The mixtures of their PHBV solutions to natural rubber latex are produced the blended films in three different ratios of 4:6, 5:5 and 6:4, respectively. They are characterized by appearance analyses which are the scanning electron microscope (SEM), universal testing machine (UTM) and differential scanning calorimetry (DSC). The SEM photomicrographs of the blended films and the controlled PHBV can provide the void distribution in the range of 12-14% and 19-21%, respectively. For mechanical properties of the blended films, the various elastic moduli of 1%, 2% and 3% (w/v) PHBV are the average of 773, 956 and 1,007 kPa, respectively. The tensile strengths of the blends increase with the increased concentrations of PHBV, similarly trend to the elastic modulus. The crystallization and melting behavior of unmixed PHBV and the blends are determined by DSC. Melting transition temperatures (T{sub m}) of the unmixed PHBV are stated two melting peak at 154°C and 173°C. Besides, the melting peaks of the blends alter in the range of 152-156°C and 168-171°C, respectively. According to morphology of the blends, the void distribution decreases twice compared to the unmixed PHBV. The results of mechanical properties and thermal analysis indicate that the blended PHBV can be developed their properties by more resilient and wide range of temperature than usual.

  1. Physical-biopolymer characterization of polyhydroxybutyrate-co-hydroxyvalerate (PHBV) blended with natural rubber latex

    Science.gov (United States)

    Kuntanoo, K.; Promkotra, S.; Kaewkannetra, P.

    2015-03-01

    A biopolymer of polyhydroxybutyrate-co-hydroxyvalerate (PHBV) is blended with bio-based materials, natural rubber latex, to improve their microstructures. The various ratios between PHBV and natural rubber latex are examined to develop their mechanical properties. In general, physical properties of PHBV are hard, brittle and low flexible while natural rubber (NR) is presented itself as high elastic materials. Concentrations of the PHBV solution are constituted at 1%, 2% and 3% (w/v). The mixtures of their PHBV solutions to natural rubber latex are produced the blended films in three different ratios of 4:6, 5:5 and 6:4, respectively. They are characterized by appearance analyses which are the scanning electron microscope (SEM), universal testing machine (UTM) and differential scanning calorimetry (DSC). The SEM photomicrographs of the blended films and the controlled PHBV can provide the void distribution in the range of 12-14% and 19-21%, respectively. For mechanical properties of the blended films, the various elastic moduli of 1%, 2% and 3% (w/v) PHBV are the average of 773, 956 and 1,007 kPa, respectively. The tensile strengths of the blends increase with the increased concentrations of PHBV, similarly trend to the elastic modulus. The crystallization and melting behavior of unmixed PHBV and the blends are determined by DSC. Melting transition temperatures (Tm) of the unmixed PHBV are stated two melting peak at 154°C and 173°C. Besides, the melting peaks of the blends alter in the range of 152-156°C and 168-171°C, respectively. According to morphology of the blends, the void distribution decreases twice compared to the unmixed PHBV. The results of mechanical properties and thermal analysis indicate that the blended PHBV can be developed their properties by more resilient and wide range of temperature than usual.

  2. Diffusion Characteristics of Toluene into Natural Rubber/Linear Low Density Polyethylene Blends

    OpenAIRE

    Obasi, Henry C.; Okoro Ogbobe; Isaac O. Igwe

    2009-01-01

    The sorption and diffusion of toluene through blends of natural rubber (NR) and linear low density polyethylene (LLDPE) of varying compositions were studied at 35, 55, and 65°C by conventional weight-gain experiments. The effects of blend ratio on the diffusion, sorption, and permeation coefficients were determined. The sorption data were used to estimate the activation energies of diffusion and permeation, parameters which were found to show a decrease when the amount of NR or LLDPE was incr...

  3. Segmentation of scanning electron microscopy images from natural rubber samples with gold nanoparticles using starlet wavelets

    OpenAIRE

    de Siqueira, Alexandre Fioravante; Cabrera, Flavio Camargo [UNESP; Pagamisse, Aylton; Job,Aldo Eloizo

    2016-01-01

    Electronic microscopy has been used for morphology evaluation of different materials structures. However, microscopy results may be affected by several factors. Image processing methods can be used to correct and improve the quality of these results. In this article, we propose an algorithm based on starlets to perform the segmentation of scanning electron microscopy images. An application is presented in order to locate gold nanoparticles in natural rubber membranes. In this application, our...

  4. Synthesis and Characterization of Liquid Natural Rubber as Impact Modifier for Epoxy Resin

    Science.gov (United States)

    Saleh, A. B. Ben; Ishak, Z. A. Mohd; Hashim, A. S.; Kamil, W. A.; Ishiaku, U. S.

    Liquid natural rubber (LNR) with a molecular weight Mn =16×103 was prepared by the depolymerization of deproteinized natural rubber latex (DPNR). The liquid natural rubber (LNR) was characterized by FTIR and H'NMR spectroscopic analysis. LNR was premixed with the epoxy resin (EP) and cured with a diamine curing agent for 1 h at 100 °C and post cured at 110 °C, for 2 h in air oven. The modified EP containing different contents of LNR (5, 10, 15 and 20 phr) were evaluated. Thermal, mechanical and morphology properties were determined. The fracture toughness (KIC) of both unmodified and modified EPs were determined on static loaded single edge notched (SEN-B) specimens at room temperature. The glass transition temperatures (Tg) of the modified EPs were decreased with increasing LNR content. The strengths and modulus of EPs were slightly reduced with the incorporation of LNR. The effect was also reflected in the significant increase in the tensile strain of modified EP. Fracture toughness of the EP was observed to increase with the presence of LNR. The toughening effect became more apparent as the testing speeds were increased from 1 to 500 mm/min. Fracture surface analysis by scanning electron microscopy (SEM) revealed the presence of a two-phase morphology.

  5. Effect of processing parameters on tensile properties of thermoplastic natural rubber (TPNR) blend with polyaniline

    Science.gov (United States)

    Zailan, Farrah Diyana; Ahmad, Sahrim; Chen, Ruey Shan; Shahdan, Dalila

    2016-11-01

    This study was aimed to determine the optimum processing parameter for the fabrication of thermoplastic natural rubber (TPNR), polyaniline (PANI) incorporated with liquid natural rubber (LNR) as a compatibilizer. The TPNR matrix, which comprised of linear low-density polyethylene (LLDPE), natural rubber (NR), and LNR in the ratio of 50:40:10, and TPNR/PANI (90 wt % /10 wt %) blend were prepared via melt blending method using Haake Rheomix internal mixer with various mixing parameter condition. The independent effects of mixing temperature (120 - 150°C), mixing speed of rotation (20-50 rpm) and time of mixing (13, 14, 15 minutes) on the tensile properties were investigated. Tensile results showed that the optimum processing parameter TPNR/PANI blend obtained at 130°C, 30 rpm, and 13 minutes. Compared to TPNR, the presence of PANI in TPNR improved the tensile strength and Young Modulus as compared to the neat TPNR acted as a control sample. The morphology characterization of TPNR and TPNR/PANI was examined by using Scanning Electron Microscopy (SEM) for further confirmation of good PANI dispersion within TPNR matrix.

  6. The influence of natural rubber/Au nanoparticle membranes on the physiology of Leishmania brasiliensis.

    Science.gov (United States)

    Barboza-Filho, Carlos G; Cabrera, Flávio C; Dos Santos, Renivaldo J; De Saja Saez, Jose Antonio; Job, Aldo E

    2012-02-01

    The development of nanotechnology has generated new means of disease diagnosis and treatment. Infectious diseases, including leishmaniasis, malaria, etc., have benefited from the advent of new nanomaterials and/or nanodevices capable of detecting specific antigens and antibodies with high specificity and low cost. In this paper, we present an investigation on a single-celled protozoan Leishmaniasis parasite, a disease considered of standard infectivity, given the high degree of immunological specificity. Natural rubber (NR) membranes incorporating gold nanoparticles (GNPs) were placed in the culture medium and the physiological behavior of Leishmania brasiliensis promastigotes was evaluated. The natural rubber membranes containing GNPs decreased the population growth rate, showing a lower index of living promastigotes (attached to the membrane surface) depending on the amount of nanoparticles deposited in the membrane surface. Such membranes may be used to develop a flexible band-aid for skin lesions from degenerative infection state, inhibiting the population growth of parasites in the lesions. In addition, natural rubber membranes would also stimulate angiogenesis in damaged tissues.

  7. Graft Copolymerization of Methyl Methacrylate Monomer onto Starch and Natural Rubber Latex Initiated by Gamma Irradiation

    Directory of Open Access Journals (Sweden)

    S. Iskandar

    2011-04-01

    Full Text Available To obtain the degradable plastic, the graft copolymerization of methyl methacrylate onto starch and natural rubber latex was conducted by a simultaneous irradiation technique. Gamma-ray from cobalt-60 source was used as the initiator. The grafted copolymer of starch-polymethyl methacrylate and the grafted copolymer of natural rubber-polymethyl methacrylate were mixed in the blender, and dried it in the oven. The dried grafted copolymer mixture was then molded using hydraulic press machine. The effect of irradiation dose, composition of the grafted copolymer mixture, film forming condition and recycle effect was evaluated. The parameters observed were tensile strength, gel fraction and soil burial degradability of grafted copolymer mixture. It was found that the tensile strength of grafted copolymer mixture increased by -ray irradiation. Increasing of the grafted copolymer of natural rubber-polymethyl methacrylate content, the gel fraction and tensile strength of the grafted copolymer mixture increased. The tensile strength of the grafted copolymer mixture was increased from 18 MPa to 23 MPa after recycled (film forming reprocessed 3 times. The grafted copolymer mixture was degraded completely after soil buried for 6 months

  8. Wood Sawdust/Natural Rubber Ecocomposites Cross-Linked by Electron Beam Irradiation

    Directory of Open Access Journals (Sweden)

    Elena Manaila

    2016-06-01

    Full Text Available The obtaining and characterization of some polymeric eco-composites based on wood sawdust and natural rubber is presented. The natural rubber was cross-linked using the electron beam irradiation. The irradiation doses were of 75, 150, 300 and 600 kGy and the concentrations of wood sawdust were of 10 and 20 phr, respectively. As a result of wood sawdust adding, the physical and mechanical properties such as hardness, modulus at 100% elongation and tensile strength, showed significant improvements. The presence of wood sawdust fibers has a reinforcing effect on natural rubber, similar or better than of mineral fillers. An increase in the irradiation dose leads to the increasing of cross-link density, which is reflected in the improvement of hardness, modulus at 100% elongation and tensile strength of blends. The cross-linking rates, appreciated using the Flory-Rehner equation, have increased with the amount of wood sawdust in blends and with the irradiation dose. Even if the gel fraction values have varied irregularly with the amount of wood sawdust and irradiation dose it was over 90% for all blends, except for the samples without wood sawdust irradiated with 75 kGy. The water uptake increased with increasing of fiber content and decreased with the irradiation dose.

  9. Natural Rubber Latex Hypersensitivity with Skin Prick Test in Operating Room Personnel

    Directory of Open Access Journals (Sweden)

    Seyed Hessamedin Nabavizadeh

    2009-12-01

    Full Text Available Hypersensitivity reactions to natural rubber latex have increased recently, especially among people with high exposure to latex allergens. Hypersensitivity reactions to latex are related to many conditions like occupational asthma. Our study was performed to determine the prevalence of hypersensitivity to natural rubber latex and potential food cross reactions in operation room personnel in Shiraz hospitals. In this cross-sectional, descriptive study, 580 operation room personnel filled out our questionnaire which included data about their personal history, symptoms of latex hypersensitivity, and other related allergies such as food hypersensitivity. An informed consent was obtained and skin prick tests were performed for natural rubber latex and potential food cross reactions (kiwi, banana, and potato. The obtained data were analyzed by SPSS and Chi-square test.Results: 104 (17.9% of the operating room personnel showed positive latex skin tests. We revealed a significant correlation between those with positive skin tests to latex with atopia, urthicaria, and food hypersensitivity. The prevalence did not vary by sex, age, education, surgical and non-surgical gloves users, or history of contact dermatitis. Latex hypersensitivity is common among operation room personnel. Evaluation of symptoms and prediction of future diseases necessitate screening tests in individuals at risk.

  10. Stretchable and Flexible High-Strain Sensors Made Using Carbon Nanotubes and Graphite Films on Natural Rubber

    OpenAIRE

    Sreenivasulu Tadakaluru; Wiradej Thongsuwan; Pisith Singjai

    2014-01-01

    Conventional metallic strain sensors are flexible, but they can sustain maximum strains of only ∼5%, so there is a need for sensors that can bear high strains for multifunctional applications. In this study, we report stretchable and flexible high-strain sensors that consist of entangled and randomly distributed multiwall carbon nanotubes or graphite flakes on a natural rubber substrate. Carbon nanotubes/graphite flakes were sandwiched in natural rubber to produce these high-strain sensors. U...

  11. The Effect of Particles on Electrolytically Polymerized Thin Natural MCF Rubber for Soft Sensors Installed in Artificial Skin

    Directory of Open Access Journals (Sweden)

    Kunio Shimada

    2017-04-01

    Full Text Available The aim of this study is to investigate the effect of particles as filler in soft rubber sensors installed in artificial skin. We examine sensors made of natural rubber (NR-latex that include magnetic particles of Ni and Fe3O4 using magnetic compound fluid (MCF. The 1-mm thickness of the electrolytically polymerized MCF rubber makes production of comparatively thin rubber sensors feasible. We first investigate the effect of magnetic particles Ni and Fe3O4 on the curing of MCF rubber. Next, in order to adjust the electric properties of the MCF rubber, we adopt Al2O3 dielectric particles. We investigate the effect of Al2O3 particles on changes in electric current, voltage and temperature of electrolytically polymerized MCF rubber liquid, and on the electric properties under the application of normal and shear forces. By adjusting the ratio of Ni, Fe3O4, Al2O3 and water in MCF rubber with Al2O3, it is possible to change the electric properties.

  12. Natural rubber latex blended polystyrene emulsion for dipping products: preparation and properties

    Directory of Open Access Journals (Sweden)

    Kovuttikulrangsie, S.

    2004-05-01

    Full Text Available Deproteinized natural rubber latex (DPNR was prepared using KAO protease enzyme to digest proteins from natural rubber low ammonia concentrated latex (NR-LA. Polystyrene latex (PS was synthesized by emulsion polymerization technique for blending with natural rubber. The maximum fraction of PS blended NR-LA or DPNR used to obtain a homogenous film was 20% w/w. The 300% modulus of PS blended NR film was increased before and after aging at 100ºC for 22 hrs. The tensile strength and elongation at break were increased at NR/PS = 95/5 w/w and tended to decrease as PS blended fraction increased. DPNR films had a lower friction coefficient than NR-LA films. PS blended NR-LA or DPNR would decrease the friction coefficient of films. The rubber-surfaced friction is reduced. The extractable protein of NR-LA film was higher than 200 μg/g whereas that of DPNR film was lower than 50 μg/g. PS blended NR-LA and DPNR could reduce the extractable protein to less than 60 μg/g and 30μg/g, respectively. The physical properties of PS blended NR-LA met ASTM D3577 and ASTM D3578 standards for dipping products of surgical gloves and examination gloves at the maximum fraction of PS 15% w/w and 20% w/w, respectively, whereas PS blended DPNR only met ASTM D3577 standard at the maximum fraction of PS < 5% w/w.

  13. Novel Slide-Ring Material/Natural Rubber Composites with High Damping Property

    Science.gov (United States)

    Wang, Wencai; Zhao, Detao; Yang, Jingna; Nishi, Toshio; Ito, Kohzo; Zhao, Xiuying; Zhang, Liqun

    2016-03-01

    A novel class of polymers called “slide-ring” (SR) materials with slideable junctions were used for high damping composites for the first time. The SR acts as the high damping phase dispersed in the natural rubber (NR) matrix, and epoxidized natural rubber (ENR) acts as the compatibilizer. The morphological, structural, and mechanical properties of the composites were investigated by atomic force microscope (AFM), transmission electron microscope (TEM), dynamic mechanical thermal analyzer (DMTA), rubber processing analyzer (RPA), and tensile tester. AFM and TEM results showed that the SR phase was uniformly dispersed in the composites, in a small size that is a function of ENR. DMTA and RPA results showed that the damping factor of the composites is much higher than that of NR, especially at room temperatures. Stretch hysteresis was used to study the energy dissipation of the composites at large strains. The results showed that SR and ENR can significantly improve the dissipation efficiency at strains lower than 200% strain. Wide-angle X-ray diffraction was used to study the strain-induced crystallization of the composites. The results indicated that the impact of the SR on the crystallization of NR is mitigated by the insulating effect of ENR.

  14. Swelling behaviour of isora/natural rubber composites in oils used in automobiles

    Indian Academy of Sciences (India)

    Lovely Mathew; K U Joseph; Rani Joseph

    2006-02-01

    Natural rubber/isora fibre composites were cured at various temperatures. The solvent swelling characteristics of natural rubber composites containing both untreated and alkali treated fibres were investigated in aromatic and aliphatic solvents like toluene, and -hexane. The diffusion experiments were conducted by the sorption gravimetric method. The restrictions on elastomer swelling exerted by isora fibre as well as the anisotropy of swelling of the composite have been confirmed by this study. Composite cured at 100°C shows the lowest percentage swelling. The uptake of aromatic solvent is higher than that of aliphatic solvent for the composites cured at all temperatures. The effect of fibre loading on the swelling behaviour of the composite was also investigated in oils like petrol, diesel, lubricating oil etc. The % swelling index and swelling coefficient of the composite were found to decrease with increase in fibre loading. This is due to the increased hindrance exerted by the fibres at higher fibre loadings and also due to the good fibre–rubber interactions. Maximum uptake of solvent was observed with petrol followed by diesel and then lubricating oil. The presence of bonding agent in the composites restrict the swelling considerably due to the strong interfacial adhesion. At a fixed fibre loading, the alkali treated fibre composite showed lower percentage swelling compared to the untreated one.

  15. Novel sustained-release of Stryphnodendron obovatum leaves extract using natural rubber latex as carrier

    Directory of Open Access Journals (Sweden)

    Felipe Azevedo Borges

    2016-07-01

    Full Text Available Natural rubber latex biomembranes (NRL, obtained from rubber tree Hevea brasiliensis (Willd. ex A. Juss. Mull. Arg., have been used as sustained drug release of drugs and plant extracts with medicinal properties. The Stryphnodendron obovatum Bench (Fabaceae, popularly known as “barbatimão” has anti-inflammatory and healing properties already described in literature. Thus, the aim of this work were to study the release behavior of the hydroethanolic extract from the leaves of S. obovatum loaded in the NRL by ultraviolet–visible spectroscopy (UV-VIS. The release followed a bi- exponential pattern and the mechanism of release was Super Case II (n > 1. FTIR analyses did not show reaction between NRL and extract, only intermolecular interaction. From SEM was possible to observe the extract at the surface, responsible for the initial fast release, which the concentrations at 5.0 mg/mL released 2.4% and at 0.1 mg/mL released 96.8%; both reached the plateau in 7 days.Keywords: Stryphnodendron obovatum. Hevea brasiliensis. Sustained release. Barbatimão. Tannin. Natural rubber latex.  

  16. Molecular Structures and Mechanical Properties of Microbe Rapid Coagulation Natural Rubber

    Institute of Scientific and Technical Information of China (English)

    LIANG Yue; HUANG Mao-Fang; ZENG Zong-Qiang

    2011-01-01

    In this work,molecular structures,dynamic mechanical properties and glass transition temperatures of microbe coagulated natural rubber(NR) samples were analyzed by using pyrolysis gas chromatography-mass spectrometry(py-GC/MS),rubber process analyzer(RPA) and dynamic mechanical thermal analysis(DMA).And the cross-linked network structures and mechanical properties of the corresponding NR vulcanizates were further determined by using nuclear magnetic resonance(NMR) crosslink density spectrometer(XLDS-15) and universal testing machines.The results show that NR raw rubber produced by rapidly coagulated with microorganism exhibits a simple molecular structure composition and good dynamic mechanical properties,and the corresponding NR vulcanizates possess the aggregation structure of high cross-linked density,a high glass transition temperature of-61.5 ℃ and high mechanical properties(tensile strength reaches 25.2 MPa),as compared with that coagulated with acetic acid.

  17. Exploration of Barriers in Achieving Proactive Environmental Strategies in a Natural Rubber Industry : A Case Study

    Directory of Open Access Journals (Sweden)

    Syarifa Arum Kusumastuti

    2016-05-01

    Full Text Available As the evolving of environmental issues over time, the development of environmental management approaches in industries began to shift to the prevention of pollution to reduce environmental impact. However, in practice, many obstacles encountered during the environmental management change to be more proactive. This study aims to explore the barriers of achieving the proactive environmental strategy in a rubber processing industry. Used a case study approach in a natural rubber processing factory, the data was collected through interviews with experts and sources as well as observation in the field. This study shows main barriers that faced by the company consist of financial issue, human resources, communities’ pressure, technological change and communication with environmental experts. The results of this study suggest conducting cooperation with research institutions or environmental experts especially for skills that cannot be controlled by the manager or employees in the company. 

  18. Nanocelluloses from jute fibers and their nanocomposites with natural rubber: Preparation and characterization.

    Science.gov (United States)

    Thomas, Martin George; Abraham, Eldho; Jyotishkumar, P; Maria, Hanna J; Pothen, Laly A; Thomas, Sabu

    2015-11-01

    Nanocellulose fibers having an average diameter of 50nm were isolated from raw jute fibers by steam explosion process. The isolation of nanocellulose from jute fibers by this extraction process is proved by SEM, XRD, FTIR, birefringence and TEM characterizations. This nanocellulose was used as the reinforcing agent in natural rubber (NR) latex along with crosslinking agents to prepare crosslinked nanocomposite films. The effects of nanocellulose loading on the morphology and mechanics of the nanocomposites have been carefully analyzed. Significant improvements in the Young's modulus and tensile strength of the nanocomposite were observed because of the reinforcing ability of the nanocellulose in the rubber matrix. A mechanism is suggested for the formation of the Zn-cellulose complex. The three-dimensional network of cellulose nanofibers (cellulose/cellulose network and Zn/cellulose network) in the NR matrix plays a major role in improving the properties of the crosslinked nanocomposites.

  19. Vulcanization characteristics and dynamic mechanical behavior of natural rubber reinforced with silane modified silica.

    Science.gov (United States)

    Chonkaew, Wunpen; Minghvanish, Withawat; Kungliean, Ulchulee; Rochanawipart, Nutthaya; Brostow, Witold

    2011-03-01

    Two silane coupling agents were used for hydrolysis-condensation reaction modification of nanosilica surfaces. The surface characteristics were analyzed using Fourier transform infrared spectroscopy (FTIR). The vulcanization kinetics of natural rubber (NR) + silica composites was studied and compared to behavior of the neat NR using differential scanning calorimetry (DSC) in the dynamic scan mode. Dynamic mechanical analysis (DMA) was performed to evaluate the effects of the surface modification. Activation energy E(a) values for the reaction are obtained. The presence of silica, modified or otherwise, inhibits the vulcanization reaction of NR. The neat silica containing system has the lowest cure rate index and the highest activation energy for the vulcanization reaction. The coupling agent with longer chains causes more swelling and moves the glass transition temperature T(g) downwards. Below the glass transition region, silica causes a lowering of the dynamic storage modulus G', a result of hindering the cure reaction. Above the glass transition, silica-again modified or otherwise-provides the expected reinforcement effect.

  20. 天然橡胶与合成聚异戊二烯橡胶的红外光谱鉴定%Identification of Nature Rubber and Poly(Isoprene)Rubber by IR Spectrum

    Institute of Scientific and Technical Information of China (English)

    陈旭辉

    2001-01-01

    There are some protein in nature rubber while no protein exists in poly(isoprene)rubber.Nature rubber was distinguished rapidly and accurately from poly(isoprene)rubber by IR spectrum of protein.%本文通过采用红外光谱法,利用蛋白质的红外吸收光谱特征,准确、快速地鉴定天然橡胶与合成聚异戊二烯橡胶。

  1. Preparation and application of nanocrystalline cellulose derived from sugarcane waste as filler modified alkanolamide on crosslink of natural rubber latex film

    Science.gov (United States)

    Harahap, Hamidah; Hayat, Nuim; Lubis, Marfuah

    2017-07-01

    Sugarcane waste is abundant sources of cellulose and it has potential to reutilize. Cellulose from sugarcane waste can be derived into nanocystalline cellulose (NCC) from crystalline region. The NCC as a filler has capability to reinforce natural rubber latex product. The crosslink in vulcanized natural rubber latex film influences several properties of product. In this work, we extracted NCC from sugarcane waste then added into natural rubber latex as filler modified alkanolamide (ALK) and also studied the crosslink of natural rubber latex films. NCC were produced from sugarcane waste by hydrolysis process with sulfuric acid 45%. The obtained NCC was characterized by using x-ray diffraction (XRD), transmission electron microscopy (TEM), and fourier transform infra red (FTIR). NCC was modified by alkanolamide and dispersed in water with filler concentration of 10%. Then the dispersion were added into latex system followed by pre-vulcanization at 70 °C. The films were prepared by coagulant dipping method and dried at 100 °C and 120 °C for 20 minutes. Characterization of NCC from sugarcane waste by using FTIR was done, it clearly showed the functional groups of cellulose. TEM showed the obtained NCC were rod-shaped with about 40-160 nm in diameter and several hundred nm in length, and XRD showed that the degree of crystalinity of NCC from sugarcane waste is 92.33%. The crosslink of natural rubber films were studied by measure the crosslink density for different filler loading by using swelling measurement with toluene solution. The result show that the crosslink density increased in line with amount of filler which added into the system, and also the crosslink density that obtained from vulcanization at 120 °C were higher than 100 °C.

  2. Compósitos de borracha natural com polianilina Composites of natural rubber with polyaniline

    Directory of Open Access Journals (Sweden)

    Patrini D. Galiani

    2007-06-01

    Full Text Available Compósitos de borracha natural (Hevea brasiliensis-BN/polianilina - PANI, com diferentes composições foram obtidos através da polimerização por emulsão do monômero anilina na presença da BN e do ácido dodecilbenzeno sulfônico (DBSA. Filmes finos e homogêneos foram obtidos por prensagem a quente. Os compósitos foram caracterizados por condutividade elétrica, FTIR, UV-vis-NIR, DSC e difração de raios X. Compósito com condutividade elétrica cerca de 14 ordens de grandeza maior que a BN foi obtido. Este alto valor de condutividade é atribuído à formação da PANI no estado dopado no compósito, que foi verificado através das técnicas de UV-vis-NIR e FTIR. Os resultados obtidos com a técnica de DSC e difratometria de raios X indicaram que os polímeros são imiscíveis e que a presença da borracha não altera significantemente a fase cristalina da PANI-DBSA no compósito.In this work composites with different compositions were obtained from natural rubber (Hevea brasiliensis (NR and polyaniline (PANI using the emulsion polymerization of aniline in the presence of NR and dodecylbenzenesulfonic acid (DBSA. The samples in film form were obtained by pressing the precipitate at 100 °C for 5 minutes. The composites were characterized by electrical conductivity, Fourier-transform infrared spectroscopy (FTIR, UV-vis-NIR spectroscopy, differential scanning calorimetry (DSC and X ray diffraction. Composites with electrical conductivity about 14 orders of magnitude higher than NR were obtained. The UV-vis-NIR and FTIR spectra showed that PANI-DBSA was formed in the composites, thus making it responsible for their high conductivity. The DSC thermograms indicated that the two polymers are immiscible and X ray diffraction evidenced that NB does not considerably affect PANI-DBSA crystalline phase in the composite.

  3. Solar-assisted smokehouse for the drying of natural rubber on small-scale Indonesian farms

    Energy Technology Data Exchange (ETDEWEB)

    Breymayer, M.; Pass, T.; Muehlbauer, W. (Hohenheim Univ., Stuttgart (Germany). Inst. for Agricultural Engineering in the Tropics and Subtropics); Amir, E.J.; Mulato, S. (Bogor Research Inst. for Estate Crops, Bogor (Indonesia))

    1993-11-01

    Natural rubber in Indonesia is mainly produced by smallholder farmers and-being the highest foreign currency generating agricultural commodity-is of great importance for the Indonesian economy. Nevertheless, due to the lack of appropriate dryers, more than 80% of the total production has to be sold as low-grade Standard Indonesian Rubber (SIR) for a relatively low price. In order to improve the product quality, a solar-heated rubber sheet dryer was developed. It consists of a flat-plate solar air heater connected to a drying chamber. Part-recirculation of the exhaust air leads to the desired drying air temperature of 45-60[sup o]C and results in a significant reduction of the drying time. To enable drying independent of weather conditions, a biomass furnace was incorporated underneath the drying chamber. The simple design of the solar-assisted smokehouse allows local production and after further improvements seems to be an economical alternative for farmer groups or nucleus estates. (Author)

  4. Biodegradation and proton exchange using natural rubber in microbial fuel cells.

    Science.gov (United States)

    Winfield, Jonathan; Ieropoulos, Ioannis; Rossiter, Jonathan; Greenman, John; Patton, David

    2013-11-01

    Microbial fuel cells (MFCs) generate electricity from waste but to date the technology's development and scale-up has been held-up by the need to incorporate expensive materials. A costly but vital component is the ion exchange membrane (IEM) which conducts protons between the anode and cathode electrodes. The current study compares natural rubber as an alternative material to two commercially available IEMs. Initially, the material proved impermeable to protons, but gradually a working voltage was generated that improved with time. After 6 months, MFCs with natural rubber membrane outperformed those with anion exchange membrane (AEM) but cation exchange membrane (CEM) produced 109 % higher power and 16 % higher current. After 11 months, polarisation experiments showed a decline in performance for both commercially available membranes while natural rubber continued to improve and generated 12 % higher power and 54 % higher current than CEM MFC. Scanning electron microscope images revealed distinct structural changes and the formation of micropores in natural latex samples that had been employed as IEM for 9 months. It is proposed that the channels and micropores formed as a result of biodegradation were providing pathways for proton transfer, reflected by the steady increase in power generation over time. These improvements may also be aided by the establishment of biofilms that, in contrast, caused declining performance in the CEM. The research demonstrates for the first time that the biodegradation of a ubiquitous waste material operating as IEM can benefit MFC performance while also improving the reactor's lifetime compared to commercially available membranes.

  5. Effect of epoxidation level on thermal properties and ionic conductivity of epoxidized natural rubber solid polymer nanocomposite electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Harun, Fatin; Chan, Chin Han; Winie, Tan [Faculty of Applied Sciences, UniversitiTeknologi MARA (UiTM), Shah Alam, 40450 Selangor Darul Ehsan (Malaysia); Sim, Lai Har; Zainal, Nurul Fatahah Asyqin [Center of Foundation Studies, PuncakAlam Campus, UniversitiTeknologi MARA, 40430 Selangor Darul Ehsan (Malaysia)

    2015-08-28

    Effect of epoxide content on the thermal and conductivity properties of epoxidized natural rubber (ENR) solid polymer nanocomposite electrolytes was investigated. Commercial available epoxidized natural rubber having 25 (ENR25) and 50 mole% (ENR50) epoxide, respectively were incorporated with lithium perchlorate (LiClO{sub 4}) salt and titanium dioxide (TiO{sub 2}) nanofiller via solution casting method. The solid polymer nanocomposite electrolytes were characterized by differential scanning calorimetry (DSC) and impedance spectroscopy (IS) for their thermal properties and conductivity, respectively. It was evident that introduction of LiClO{sub 4} causes a greater increase in glass transition temperature (T{sub g}) and ionic conductivity of ENR50 as compared to ENR25. Upon addition of TiO{sub 2} in ENR/LiClO{sub 4} system, a remarkable T{sub g} elevation was observed for both ENRs where ENR50 reveals a more pronounced changes. It is interesting to note that they exhibit different phenomenon in ionic conductivity with TiO{sub 2} loading where ENR25 shows enhancement of conductivity while ENR50 shows declination.

  6. Magnetic and microwave absorbing properties of magnetite-thermoplastic natural rubber nanocomposites

    Science.gov (United States)

    Kong, Ing; Hj Ahmad, Sahrim; Hj Abdullah, Mustaffa; Hui, David; Nazlim Yusoff, Ahmad; Puryanti, Dwi

    2010-11-01

    Magnetic and microwave absorbing properties of thermoplastic natural rubber (TPNR) filled magnetite (Fe 3O 4) nanocomposites were investigated. The TPNR matrix was prepared from polypropylene (PP), natural rubber (NR) and liquid natural rubber (LNR) in the ratio of 70:20:10 with the LNR as the compatibilizer. TPNR-Fe 3O 4 nanocomposites with 4-12 wt% Fe 3O 4 as filler were prepared via a Thermo Haake internal mixer using a melt-blending method. XRD reveals the presence of cubic spinel structure of Fe 3O 4 with the lattice parameter of a=8.395 Å. TEM micrograph shows that the Fe 3O 4 nanoparticles are almost spherical with the size ranging 20-50 nm. The values of saturation magnetization ( MS), remanence ( MR), initial magnetic susceptibility ( χi) and initial permeability ( μi) increase, while the coercivity ( HC) decreases with increasing filler content for all compositions. For nanocomposites, the values of the real ( ɛr') and imaginary permittivity ( ɛr'') and imaginary permeability ( μr'') increase, while the value of real permeability ( μr') decreases as the filler content increases. The absorption or minimum reflection loss ( RL) continuously increases and the dip shifts to a lower frequency region with the increasing of both filler content in nanocomposites and the sample thickness. The RL is -25.51 dB at 12.65 GHz and the absorbing bandwidth in which the RL is less than -10 dB is 2.7 GHz when the filler content is 12 wt% at 9 mm sample thickness.

  7. Magnetic and microwave absorbing properties of magnetite-thermoplastic natural rubber nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Kong, Ing, E-mail: kong_ing_2005@yahoo.co [School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor Darul Ehsan (Malaysia); Hj Ahmad, Sahrim; Hj Abdullah, Mustaffa [School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor Darul Ehsan (Malaysia); Hui, David [Department of Mechanical Engineering, University of New Orleans, New Orleans, LA 70148 (United States); Nazlim Yusoff, Ahmad [Diagnostic Imaging and Radiotherapy Programme, Faculty of Allied Health Sciences, Universiti Kebangsaan Malaysia, 50300 Jalan Raja Muda Abdul Aziz, Kuala Lumpur (Malaysia); Puryanti, Dwi [School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor Darul Ehsan (Malaysia)

    2010-11-15

    Magnetic and microwave absorbing properties of thermoplastic natural rubber (TPNR) filled magnetite (Fe{sub 3}O{sub 4}) nanocomposites were investigated. The TPNR matrix was prepared from polypropylene (PP), natural rubber (NR) and liquid natural rubber (LNR) in the ratio of 70:20:10 with the LNR as the compatibilizer. TPNR-Fe{sub 3}O{sub 4} nanocomposites with 4-12 wt% Fe{sub 3}O{sub 4} as filler were prepared via a Thermo Haake internal mixer using a melt-blending method. XRD reveals the presence of cubic spinel structure of Fe{sub 3}O{sub 4} with the lattice parameter of a=8.395 A. TEM micrograph shows that the Fe{sub 3}O{sub 4} nanoparticles are almost spherical with the size ranging 20-50 nm. The values of saturation magnetization (M{sub S}), remanence (M{sub R}), initial magnetic susceptibility ({chi}{sub i}) and initial permeability ({mu}{sub i}) increase, while the coercivity (H{sub C}) decreases with increasing filler content for all compositions. For nanocomposites, the values of the real ({epsilon}{sub r}') and imaginary permittivity ({epsilon}{sub r}'') and imaginary permeability ({mu}{sub r}'') increase, while the value of real permeability ({mu}{sub r}') decreases as the filler content increases. The absorption or minimum reflection loss (R{sub L}) continuously increases and the dip shifts to a lower frequency region with the increasing of both filler content in nanocomposites and the sample thickness. The R{sub L} is -25.51 dB at 12.65 GHz and the absorbing bandwidth in which the R{sub L} is less than -10 dB is 2.7 GHz when the filler content is 12 wt% at 9 mm sample thickness.

  8. Miscibility study of hexanoyl chitosan in blend with epoxidized natural rubber by viscometric analysis

    Science.gov (United States)

    Jamal, Asheila; Chan, C. H.; Muhammad, F. H.; Winie, Tan

    2015-08-01

    Miscibility of blends of hexanoyl chitosan and epoxidized natural rubber with 25 mol% epoxidation level (ENR25) was investigated by dilute solution viscometry (DSV). Experimental results obey the Huggins' equation in the concentration range under investigation. Intrinsic viscosities are found to vary linearly with blend composition. The difference between experimental and ideal Huggins coefficients, κ =K12-√{K1ṡK2 } is proposed to evaluate the miscibility behavior of the blends. Negative deviations from the ideal behavior indicated immiscibility between hexanoyl chitosan and ENR25.

  9. Trial Production of Surgical Gloves from Irradiated Natural Rubber Latex on Factory Scale

    Directory of Open Access Journals (Sweden)

    M. Utama

    2005-07-01

    Full Text Available Trial production of surgical gloves from irradiated natural rubber latex at the PT. Laxindo Utama Serang Banten glove factory has been carried out. The variation of heating temperature and leaching time during processing were evaluated. The physical and mechanical properties and the protein allergen respond of surgical gloves using ELISA method were measured. The results showed that the physical and mechanical of surgical gloves such as tensile strength, modulus, and elongation at break arefound to meet the requirements of the ISO or SNI standard for surgical gloves. While the allergic response through clinical tested latex-sensitive protein allergen known as ELISA test is found to be negative.

  10. Preparation and Properties of Biocomposite Based on Natural Rubber and Bagasse Nanocellulose

    Directory of Open Access Journals (Sweden)

    Jarnthong Methakarn

    2015-01-01

    Full Text Available Biocomposite based on natural rubber (NR and bagasse nanocellulose (BNC was prepared in latex state. The mechanical, morphological and thermal properties of NR/BNC biocomposite were investigated. It was found that the addition of 3 wt% of BNC in NR film caused significant increase in modulus at 100% and 300% elongations and improved thermal stability of NR/BNC biocomposite. However, the strength at break and elongation at break of the biocomposite were not enhanced correlating to the morphological result obtained from scanning electron microscope (SEM.

  11. Sericin-binded-deprotenized natural rubber film containing chitin whiskers as elasto-gel dressing.

    Science.gov (United States)

    Watthanaphanit, Anyarat; Rujiravanit, Ratana

    2017-03-18

    Here, we aims to demonstrate a simple concept in biomaterials design by using natural resources solely as raw materials to fabricate elastic wound care dressing. Elasto-gel films comprise of silk sericin (SRC), natural rubber (NR), and chitin whisker (CTW) were developed. A glue-like protein SRC found in silk cocoons is beneficial for the treatment of wounds due to its superior skin moisturizing ability. However, the pure SRC film is generally difficult to be fabricated because of its weak structural feature. This limitation was overcome by using NR as a binder which consecutively rendered elasticity and strength of the films. CTW was chosen as another component to promote ability of the films for tissue restoration. Before the film formation, protein in the natural rubber latex (NRL) was removed to avoid allergic and cytotoxic problems. The enzyme-treated NR/SRC (ETNR/SRC) films having different blend compositions were fabricated by solution casting technique. The highest amount of the SRC to gain an easy to handle ETNR/SRC film was 30%. The ETNR/SRC/CTW films having 20% SRC were fabricated and studied in comparison. Essential properties of the films as elastic wound care dressings were investigated and effect of the materials chemistry on the observed properties were discussed.

  12. Influence of the Surfactant Nature on the Occurrence of Self-Assembly between Rubber Particles and Thermally Reduced Graphite Oxide during the Preparation of Natural Rubber Nanocomposites

    Directory of Open Access Journals (Sweden)

    Héctor Aguilar-Bolados

    2015-01-01

    Full Text Available The natural rubber (NR latex consists of polymer particles charged negatively due to the adsorbed phospholipids and proteins molecules. The addition of stable aqueous suspension of thermally reduced graphite oxide (TRGO stabilized by ionic surfactants to NR latex can favor the occurrence of interaction between the stabilized TRGO and NR particles. Herein, the use of two surfactants of different nature, namely, sodium dodecyl sulfate (SDS and dodecyltrimethylammonium bromide (DTAB, for the preparation of (TRGO/NR nanocomposites, is reported. Zeta potential and particle size measurements indicated that the use of DTAB as cationic surfactant results in the flocculation of NR particles and promoted the formation of ion-pair interactions between TRGO and the proteins and/or phospholipids present on the NR surface. This indicates that the use of DTAB can promote a self-assembly phenomenon between TRGO with adsorbed DTAB molecules and NR particles. The occurrence of self-assembly phenomenon allows obtaining homogenous dispersion of TRGO particles in the polymer matrix. The TRGO/NR nanocomposites prepared by the use of DTAB exhibited superior mechanical properties and excellent electrical conductivities reaching values of stress at 500% strain of 3.02 MPa and 10−4 S/cm, respectively.

  13. Green synthesis of colloidal silver nanoparticles using natural rubber latex extracted from Hevea brasiliensis.

    Science.gov (United States)

    Guidelli, Eder José; Ramos, Ana Paula; Zaniquelli, Maria Elisabete D; Baffa, Oswaldo

    2011-11-01

    Colloidal silver nanoparticles were synthesized by an easy green method using thermal treatment of aqueous solutions of silver nitrate and natural rubber latex (NRL) extracted from Hevea brasiliensis. The UV-Vis spectra detected the characteristic surface plasmonic absorption band around 435 nm. Both NRL and AgNO(3) contents in the reaction medium have influence in the Ag nanoparticles formation. Lower AgNO(3) concentration led to decreased particle size. The silver nanoparticles presented diameters ranging from 2 nm to 100 nm and had spherical shape. The selected area electron diffraction (SAED) patterns indicated that the silver nanoparticles have face centered cubic (fcc) crystalline structure. FTIR spectra suggest that reduction of the silver ions are facilitated by their interaction with the amine groups from ammonia, which is used for conservation of the NRL, whereas the stability of the particles results from cis-isoprene binding onto the surface of nanoparticles. Therefore natural rubber latex extracted from H. brasiliensis can be employed in the preparation of stable aqueous dispersions of silver nanoparticles acting as a dispersing and/or capping agent. Moreover, this work provides a new method for the synthesis of silver nanoparticles that is simple, easy to perform, pollutant free and inexpensive.

  14. Improvement of toughness and water resistance of bioplastic based on wheat gluten using epoxidized natural rubber

    Science.gov (United States)

    Hemsri, S.; Thongpin, C.; Somkid, P.; Sae-arma, S.; Paiykaew, A.

    2015-07-01

    Novel blends based on wheat gluten (WG) and epoxidized natural rubber (ENR) were fabricated with different ENR contents of 10, 20 and 30 wt% in an internal mixer. Sulfur vulcanization was used to crosslink the ENR phase in the blends. Comparatively, blends of WG and natural rubber (WG/NR) were prepared in the same condition as the WG/ENR blends. Tensile mechanical properties and impact strength of the WG/ENR blends were investigated and compared with the WG/NR blends as well as pure WG. Moreover, water absorption of pure WG and the WG/ENR blends was also tested. As investigated by scanning electron microscopy (SEM), the results revealed more compatibility between WG and ENR compared with NR. The elongation at break, impact strength and water resistance of the WG/ENR blends were found to remarkably increase with respect to the pure WG. Thus, incorporation of ENR into WG could improve toughness and water resistance of WG. Furthermore, the effect of adding glycerol acting as a plasticizer on the mechanical properties and impact strength of the WG/ENR blends was also studied. The blends with glycerol-plasticized WG (WG-Gly/ENR) showed more homogeneous morphologies and superior results in the mechanical properties and impact strength compared with the WG/ENR blends.

  15. Preparation and properties of natural rubber reinforced with polydopamine-coating modified carbon nanotubes

    Directory of Open Access Journals (Sweden)

    Y-L. Lu

    2017-01-01

    Full Text Available Multi-walled carbon nanotubes (MWCNTs were functionalized by polydopamine (PDA-coating and mixed with natural rubber (NR via latex compounding. Compared with pristine MWCNTs, the surface of MWCNT-PDA was covered by an amorphous and nanometer-scale PDA layer which had a large amount of oxygenic and nitric functional groups. So the MWCNT-PDA showed a perfect dispersion in NR matrix. The tensile strength of NR/MWCNT-PDA (5 phr composites is 28.6 MPa, compared with the pure NR, which increased by 42%. For the electrical properties, when the content of MWCNTPDA or MWCNTs is 2 phr, the volume resistivity of NR/MWCNT-PDA composites falls to about 2.7·109 Ω·cm, compared with 3.3·1013 Ω·cm of NR/MWCNT composites. The thermal conductivity of NR composites increased only by 28.2% when 5 phr MWCNT-PDA was added. A model proposed by Nan was used to calculate the thermal conductivity of NR/MWCNT composites, and the calculated values were compared with the experimental values, the results showed that the interface thermal resistance is the main reason why MWCNTs could not significantly increase the thermal conductivity of natural rubber.

  16. The influence of molybdenum disulfide nanoplatelets on the dispersion of nano silica in natural rubber composites

    Science.gov (United States)

    Weng, Peijin; Wei, Qiuyan; Tang, Zhenghai; Lin, Tengfei; Guo, Baochun

    2015-12-01

    The dispersion of nanofiller in polymer composites is critical in governing the ultimate performances. Present study aimed to improve the dispersion of silica in elastomeric materials based on natural rubber (NR) composites using the nanoplatelets of molybdenum disulfide (MoS2), a graphene-like layered inorganic. NR latex was co-coagulated with MoS2 suspension to form NR/MoS2 compounds (1∼5 phr). Then silica (30 phr) was incorporated into NR/MoS2 compounds, followed by curing with sulfur, to obtained NR/MoS2/silica composites. The dispersion state of silica in the composites was examined by TEM and the effects of MoS2 on the performance of the composites were investigated. It was found that a small amount of MoS2 nanoplatelets significantly improved the silica dispersion. Consequently, the static and dynamic mechanical properties of the crosslinked natural rubber materials were greatly enhanced. The improved dispersion of silica is associated with charge transfer interaction, giving rise to electrostatic repulsion among silica.

  17. Oxidation Degradation Study And Use Of Phenol And Amina Antioxidant Compounds In Natural Rubber Cyclical

    Directory of Open Access Journals (Sweden)

    Arofah Megasari Siregar

    2015-08-01

    Full Text Available The research was conducted research into the use of commercial antioxidants Irganox 1010 wingstay to inhibit the oxidative degradation of cyclic polymers of natural rubber and polypropylene nanocomposite with commercial montmorillonite PP MMT-Clay. Proces mixing nanocomposit PPMMT using commercial compatibiliser PP-g-MA PB3200 made in an internal mixer at a temperature of 180 C for 10 minutes and 65 rpm rotor speed. Hyndered phenol antioxidant effectiveness was analyzed using Fourier Transform Infra Red FTIR. Analysis of infrared is done by measuring the broad index absorption of the carbonyl group CO at a wavelength of 1700 cm-1 and a broad index uptake hydroxyl group at a wavelength of 3400 cm-1 before and after heated in an oven temperature of 125oC with variations in exposure time. The results indicate the use of antioxidant Irganox 1010 in nanocomposite PP MMT with a stabilizing factor of 5.5. Further commercial antioxidants will be used to restrain the rate of oxidation degradation of the natural rubber products cyclical CNR.

  18. Effect of neodymium stearate on cure and mechanical properties of epoxidized natural rubber

    Institute of Scientific and Technical Information of China (English)

    LUO Yongyue; YANG Changjin; WANG Yueqiong; HE Canzhong; ZHONG Jieping; LIAO Shuangquan; PENG Zheng; LIU Xingxun

    2012-01-01

    The effect of neodymium stearate (NdSt) on cure and mechanical properties of expoxidized natural rubber with 25 mol.% epoxidation (ENR25) was studied in the concentration range of 0 to 2 phr,and the relationship between structure and mechanical properties of ENR25 vulcanizates was also discussed.Neodymium sterate was synthesized by saponification of stearic acid with newly formed rare earth hydroxide in water medium,and the structure of NdSt was investigated by Fourier transform infrared spectroscopy (FTIR).Crosslinking density of vulcanized natural rubber was studied by equilibrium swelling method.The results indicated that the interaction force between carboxylic ion of NdSt prepared in the lab and Nd ion was mainly ionic bond through FTIR analysis.NdSt could accelerate the vulcanization of ENR25 and influence the network structure of ENR25 vulcanizates.The incorporation of 1 phr NdSt for ENR25 vulcanizates showed the optimal aging resistance.

  19. A comparison of different rubber dam systems on a dental simulator.

    Science.gov (United States)

    Kapitan, Martin; Sustova, Zdenka; Ivancakova, Romana; Suchanek, Jakub

    2014-01-01

    The purpose of this study was to test the hypothesis that more recently developed rubber dam systems (OptraDam ® Plus and OptiDam™) are faster and easier to handle, and that the quality of isolation is not decreased. The rubber dam systems were applied in standard conditions on a dental simulator in several model clinical situations. The time of preparation, application and removal were measured and the quality of isolation was evaluated. The median time of rubber dam placement was 51 s (Q1 = 38 s; Q3 = 79 s). The shortest median time of application was with OptiDam™ (42 s), followed by a conventional rubber dam (53 s), and finally the longest was with OptraDam® Plus (58 s). The median volume of fluid remaining in the isolated space after 5 minutes was 9.5 mL (Q1 = 8 mL; Q3 = 10 mL). The largest median volume of remaining water was with OptiDam™ (10 mL), followed by a conventional rubber dam (9.5 mL) and the least with OptraDam® Plus (8.5 mL). The afore-stated hypothesis about the advantages of modern rubber dam isolation systems was accepted for OptiDam™, but rejected for OptraDam® Plus. The results could contribute to decision-making concerning the choice of rubber dam system.

  20. The effect of remaining SDS on protein release in later leaching steps of deproteinized natural rubber

    Directory of Open Access Journals (Sweden)

    Adisara Yooyanyong

    2016-02-01

    Full Text Available The effect of remaining sodium dodecyl sulfate (SDS used in washing steps on further leaching of proteins from the deproteinized rubber films was investigated. High-Ammonia Natural Rubber Latex (HANRL was diluted with 0.01% w/v potassium hydroxide solution to obtain about 30% dry rubber content (DRC and it is called diluted NRL. The untreated NRL was directly casted to a film (sample 0. Sample 1 was prepared by centrifugation of diluted NRL at 5000 rpm for 1 min. Sample 1-2 was prepared by washing Sample 1 with 0.5%wt SDS solution. Sample 1-3 was prepared by washing Sample 1-2 with 0.1%wt SDS solution. After that they were casted into films. The dried films were checked for the extractable protein (EP content by modified Lowry method and nitrogen content according to SMR: Bulletin No.7-1992. The EP content of Sample 1 film was less than the untreated (Sample 0 one but the EP content was increased after washing with 0.5%wt SDS solution and then dropped slightly after washing again with 0.1%wt SDS solution. In contrast, nitrogen content and FTIR spectra confirmed that the total amount of proteins in films was decreased when they underwent more treating steps. This finding suggested that although overall protein content decreased, the remaining SDS on the films could facilitate further leaching of EP from the film surface when it was in contact with extraction medium (PBS or synthetic sweat under condition with shear force. The use of this deproteinized film should, therefore, be done with care.

  1. Multiwall carbon nanotube-filled natural rubber: Electrical and mechanical properties

    Directory of Open Access Journals (Sweden)

    L. Bokobza

    2012-03-01

    Full Text Available The influence of multiwall carbon nanotube (MWNTs contents on electrical and mechanical properties of MWNTs-reinforced natural rubber (NR composites is studied. The volume resistivity of the composites decreases with increasing the MWNTs content and the electrical percolation threshold is reached at less than 1 phr of MWNTs (phr = parts of filler by weight per hundred parts of rubber. This is caused by the formation of conductive chains in the composites. Electrical measurements under uniaxial deformation of a composite carried out at a filler loading above the percolation threshold, indicate a gradual disconnection of the conducting network with the bulk deformation. The drop in the storage modulus G' with the shear strain amplitude (Payne effect is also attributed to a breakdown of the filler network. Considerable improvement in the stiffness is obtained upon incorporation of MWNTs in the polymer matrix but the main factor for reinforcement of NR by MWNTs appears to be their high aspect ratio rather than strong interfacial interaction with rubber. The tensile strength and the elongation at break of the composites are reduced with regard to the unfilled sample. This is probably due to the presence of some agglomerates that increase with the nanotube content. This hypothesis is confirmed by a cyclic loading of the composites where it is seen that the deformation at break occurs at a much higher level of strain in the second stretch than in the first one. The overall significant property improvements are the result of a better nanotube dispersion attributed to the combined use of tip sonication and cyclohexane as dispersion aids during composite processing.

  2. Field Evaluation of Ultra-High Pressure Water Systems for Runway Rubber Removal

    Science.gov (United States)

    2014-04-01

    ER D C/ G SL T R- 14 -1 1 Field Evaluation of Ultra-High Pressure Water Systems for Runway Rubber Removal G eo te ch ni ca l a nd S tr...Field Evaluation of Ultra-High Pressure Water Systems for Runway Rubber Removal Aaron B. Pullen Applied Research Associates, Inc. 421 Oak Avenue...Engineer Center Tyndall Air Force Base, FL 32403-5319 ERDC/GSL TR-14-11 ii Abstract Runway rubber removal is a maintenance function employed to

  3. Dependence of Adhesion Property of Epoxidized Natural Rubber (ENR 25/Ethylene-Propylene-Diene Rubber Blend Adhesives Crosslinked by Benzoyl Peroxide

    Directory of Open Access Journals (Sweden)

    B. T. Poh

    2014-01-01

    Full Text Available The loop tack, peel strength, and shear strength of crosslinked epoxidized natural rubber (ENR 25/ethylene-propylene-diene rubber (EPDM blend adhesives were investigated. Coumarone-indene resin, toluene, and benzoyl peroxide were used as the tackifier, solvent, and crosslinking agent, respectively, throughout the experiment. The adhesive was coated on a polyethylene terephthalate (PET substrate using a SHEEN hand coater at 60 μm and 120 μm coating thickness. It was cured at 80°C for 30 minutes before testing on a Lloyd adhesion tester operating at testing rates from 10 to 60 cm min−1. Results show that loop tack and peel strength of the ENR 25/EPDM adhesive pass through a maximum value at 2 parts per hundred parts of rubber (phr of benzoyl peroxide content. This observation is attributed to the increase in crosslinking which enhances the cohesive strength of the adhesive. Further addition of the crosslinking agent decreases the tack and peel strength due to the decrease in wettability of the over-crosslinked adhesive. Shear strength, however, increases steadily with benzoyl peroxide content, an observation which is associated with the steady increase in the cohesive strength. The adhesion properties increase with increasing coating thickness and testing rate.

  4. Study on the structure-properties relationship of natural rubber/SiO2 composites modified by a novel multi-functional rubber agent

    Directory of Open Access Journals (Sweden)

    S. Y. Yang

    2014-06-01

    Full Text Available Vulcanization property and structure-properties relationship of natural rubber (NR/silica (SiO2 composites modified by a novel multi-functional rubber agent, N-phenyl- N'-(γ-triethoxysilane-propyl thiourea (STU, are investigated in detail. Results from the infrared spectroscopy (IR and X-ray photoelectron spectroscopy (XPS show that STU can graft to the surface of SiO2 under heating, resulting in a fine-dispersed structure in the rubber matrix without the connectivity of SiO2 particles as revealed by transmission electron microscopy (TEM. This modification effect reduces the block vulcanization effect of SiO2 for NR/SiO2/STU compounds under vulcanization process evidently. The 400% modulus and tensile strength of NR/SiO2/STU composites are much higher than that of NR/SiO2/TU composites, although the crystal index at the stretching ratio of 4 and crosslinking densities of NR/SiO2 composites are almost the same at the same dosage of SiO2. Consequently, a structure-property relationship of NR/SiO2/STU composites is proposed that the silane chain of STU can entangle with NR molecular chains to form an interfacial region, which is in accordance with the experimental observations quite well.

  5. Advanced Metal Rubber Sensors for Hypersonic Decelerator Entry Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NanoSonic proposes to design and develop light-weight, low-modulus, and durable Metal Rubber™ sensors for aeroelastic analysis of Hypersonic Decelerator Entry...

  6. 粤东地区天然橡胶种植问题及建议%Planting Problems and Suggestions of Natural Rubber in Easten Guangdong Province

    Institute of Scientific and Technical Information of China (English)

    丰明; 王秀全; 魏海波; 郑春合

    2016-01-01

    Planting status and problems of natural rubber industry in redamation areas of easten GuangDong province is summarized. Some suggestions for promoting the natural rubber industry in easten Guangdong province are put forward from the aspect of varieties collocation, workforce planning, talent training, industrial restructuring and tapping system reform.%介绍广东省粤东垦区天然橡胶种植现状,分析目前粤东地区天然橡胶发展中存在的主要问题,从品种配置、劳动力规划、人才培养、割制改革、产业结构调整等方面,提出促进粤东地区天然橡胶产业发展的建议。

  7. Adhesion property of epoxidized natural rubber (ENR-based adhesives containing calcium carbonate

    Directory of Open Access Journals (Sweden)

    2008-06-01

    Full Text Available The adhesion property (i.e. viscosity, loop tack and peel strength of epoxidized natural rubber (ENR 25 and ENR 50 grade-based pressure-sensitive adhesive was studied in the presence of calcium carbonate. The range of calcium carbonate loaded was from 10 to 50 parts per hundred parts of rubber (phr. Coumarone-indene resin was used as the tackifier and its concentration was fixed at 80 phr. Toluene was chosen as the solvent throughout the investigation. The substrates (PET film/paper were coated with the adhesive using a SHEEN hand coater at a coating thickness of 60 µm. Viscosity of the adhesive was measured by a HAAKE Rotary Viscometer whereas loop tack and peel strength were determined by a Llyod Adhesion Tester operating at 30 cm/min. Results show that viscosity of ENR-based adhesives increases gradually with increase in calcium carbonate loading due to the concentration effect of the filler. However, for loop tack and peel strength, it passes through a maximum at 30 phr calcium carbonate, an observation which is attributed to the optimum wettability of adhesive on the substrate at this adhesive composition. ENR 25-based adhesive consistently exhibits higher adhesion property than ENR 50 for all calcium carbonate loadings studied.

  8. PMMA-N,N,N-trimethyl chitosan nanoparticles for fabrication of antibacterial natural rubber latex gloves.

    Science.gov (United States)

    Arpornwichanop, Thanida; Polpanich, Duangporn; Thiramanas, Raweewan; Suteewong, Teeraporn; Tangboriboonrat, Pramuan

    2014-08-30

    This paper presents one-pot synthesis of N,N,N-trimethyl chitosan (TMC) stabilized poly(methyl methacrylate) (PMMA) latex particles via the miniemulsion polymerization technique. From (1)H NMR, synthesized TMC contains 52% degree of quaternization. Compared to native biopolymer chitosan, TMC possesses permanently positive charges as well as provides greater antibacterial activity. Combining properties of PMMA and TMC, PMMA-TMC latex nanoparticles (hydrodynamic size ≈282 nm) could be used in place of inorganic lubricating powder in fabrication of latex gloves at pH ≥ 7. After immersing sulphur prevulcanized natural rubber (SPNR) film into 3 wt% of PMMA-TMC latex at pH 7, significant amount of nanoparticles uniformly deposited onto SPNR film was observed under SEM. A number of nanoparticles present on film surface would increase surface roughness of the rubber film and potentially inhibit the bacterial (Escherichia coli and Staphylococcus aureus) growth, which would be useful for fabrication of special gloves with antibacterial property.

  9. Study of rheological behavior and miscibility of epoxidized natural rubber modified neoprene

    Science.gov (United States)

    Chiu, Hsien-Tang; Tsai, Peir-An; Cheng, Tzu-Chi

    2006-02-01

    The Mooney viscosity, curing rates, vulcanization behavior, and the relationship between molecular motion of epoxidized natural rubber (ENR) and neoprene (CR) blends at different blending ratios have been studied. The experimental results of ENR/CR blends show that the Mooney viscosity decreased gradually. Plasticization was most pronounced at an ENR/CR ratio of 75/25 and is thus the easiest to process. Owing to the ring opening of the epoxy group of ENR, the rate of crosslink formation is much faster than that of CR at higher temperature. The vulcanized rate increased with increasing ENR content. The results indicated that 175 °C and 5 min were the optimum processing conditions for ENR/CR blends. The DMA spectra showed a single damping peak for the ENR/CR blends, which suggests that ENR and CR are miscible. As seen in the Arrhenius plot of frequency against T g, the activation energy increased with increasing ENR contents. This suggests the existence of interpenetration of these two rubber molecular networks.

  10. Thermal degradation of epoxidized natural rubber in presence of neodymium stearate

    Institute of Scientific and Technical Information of China (English)

    LUO Yongyue; YANG Changjin; CHEN Bangqian; XU Kui; ZHONG Jieping; PENG Zheng; L(U) Zhen

    2013-01-01

    The effect of neodymium stearate (NdSt) synthesized by saponification method on thermal degradation and thermo-oxida-tive degradation of expoxidized natural rubber with 25 mol.% epoxidation (ENR25) was investigated by thermogravimetric analysis (TGA),and the structure of ENR25 vulcanized with NdSt after thermo-oxidative decomposition was characterized using Fourier transform infared spectroscopy-attenuated total-reflectance (FTIR-ATR).The thermal degradation kinetic parameters of ENR25 with different loadings of NdSt were determined by Coats-Redfern method.The results showed that the thermal degradation of ENR25 in nitrogen was a one-step reaction regardless of NdSt content,whereas the thermo-oxidative degradation was a multiple-step reaction.The thermal and thermo-oxidative stability of the ENR25 vulcanizates with the addition of NdSt was higher than that of pure ENR25 vulcanizates.The ENR25 vulcanizates with the incorporation of 1 phr (per hundred parts of rubber) NdSt imparted the highest activation energy (E) of thermal and thermo-oxidative degradation.This could be attributed to the many unoccupied orbits in rare earth Nd,which could capture the free radicals and make the epoxide groups stable in the process of thermal and thermo-oxidative degradation for ENR25.

  11. Smallholder rubber agroforestry system in Mindanao, Philippines: A village approach to climate change mitigation

    OpenAIRE

    Mercado, Agustin R., Jr.; Edralin, Don Immanuel; Arcinal, Gil A.; Reyes, Manuel R.

    2014-01-01

    This poster presented the impact, sustainability and adaptability of Rubber Agroforestry System (RAS) to smallholder farmers Claveria, Philippines. LTRA-12 (Conservation agriculture for food security in Cambodia and the Philippines)

  12. Ericameria Nauseosa (rubber rabbitbrush): a complementary rubber feedstock to augment the guayule rubber production stream

    Science.gov (United States)

    Ericameria nauseosa (rubber rabbitbrush) is a highly prolific desert shrub that produces high quality natural rubber. Over the past several years we have investigated rabbitbrush’s potential as a commercial rubber feedstock. Like guayule, rabbitbrush produces natural rubber within its bark tissues a...

  13. STRAIN-CONTROLLED BIAXIAL TENSION OF NATURAL RUBBER: NEW EXPERIMENTAL DATA

    KAUST Repository

    Pancheri, Francesco Q.

    2014-03-01

    We present a new experimental method and provide data showing the response of 40A natural rubber in uniaxial, pure shear, and biaxial tension. Real-time biaxial strain control allows for independent and automatic variation of the velocity of extension and retraction of each actuator to maintain the preselected deformation rate within the gage area of the specimen. Wealso focus on the Valanis-Landel hypothesis that is used to verify and validate the consistency of the data.Weuse a threeterm Ogden model to derive stress-stretch relations to validate the experimental data. The material model parameters are determined using the primary loading path in uniaxial and equibiaxial tension. Excellent agreement is found when the model is used to predict the response in biaxial tension for different maximum in-plane stretches. The application of the Valanis-Landel hypothesis also results in excellent agreement with the theoretical prediction.

  14. Diffusion Characteristics of Toluene into Natural Rubber/Linear Low Density Polyethylene Blends

    Directory of Open Access Journals (Sweden)

    Henry C. Obasi

    2009-01-01

    Full Text Available The sorption and diffusion of toluene through blends of natural rubber (NR and linear low density polyethylene (LLDPE of varying compositions were studied at 35, 55, and 65°C by conventional weight-gain experiments. The effects of blend ratio on the diffusion, sorption, and permeation coefficients were determined. The sorption data were used to estimate the activation energies of diffusion and permeation, parameters which were found to show a decrease when the amount of NR or LLDPE was increased. The transport of toluene through most of the blends was anomalous, althouh at 35°C, the transport of toluene through the 60/40 blend was Fickian and at 35°C, pseudo-Fickian. The enthalpy of sorption of toluene obtained is positive and suggests a Henry's type sorption.

  15. Factors Affecting the Physical Properties of Epoxidized Natural Rubber (ENR/ Polyvinyl Chloride (PVCAerogels

    Directory of Open Access Journals (Sweden)

    Yeon Hui Yuan

    2015-06-01

    Full Text Available Microsized aerogels were prepared from epoxidized natural rubber (ENR/polyvinyl chloride (PVC matrix blend using the solvent exchange method and dropping technique with sonication. Some parameters were manipulated in order to observe its effects on resultant aerogels. Parameter studied were ENR/PVC solution viscosity, ratio of ENR/PVC solution to EtOH/H2O solution and sonication time.It was found that the best parameter to produce spherical microsized ENR/PVC aerogels with high water absorption capability was by using the ENR/PVC to THF ratio of 1:20, ENR/PVC solution to EtOH/H2O solution of 1:4 and a sonication time of 3 minutes.

  16. Poly(lactic acid)/natural rubber/cellulose nanocrystal bionanocomposites. Part II: properties evaluation.

    Science.gov (United States)

    Bitinis, Natacha; Fortunati, Elena; Verdejo, Raquel; Bras, Julien; Kenny, Jose Maria; Torre, Luigi; López-Manchado, Miguel Angel

    2013-07-25

    The crystallization, mechanical and biodegradation properties of poly(lactic acid)/natural rubber/cellulose nanocrystals (CNC) bionanocomposites were evaluated. Three types of CNC were used in this study, one unmodified (CNC), long alkyl chain grafted CNC (C18-g-CNC) and PLA grafted CNC (PLA-g-CNC). The CNC modifications determined the affinity of the nanocrystals toward the polymers and reflected on the ultimate properties. Interestingly, PLA-g-CNC acted as a nucleating agent for the PLA matrix in the bio-based PLA/NR blend. Good mechanical properties were reported, as the bionanocomposites maintained a high elongation at break for a concentration up to 3 wt.% of cellulose nanocrystals. Moreover, the disintegration study confirmed that the materials completely disintegrated after one month in compost.

  17. Polypropylene/natural rubber thermoplastic vulcanizates by eco-friendly and sustainable electron induced reactive processing

    Science.gov (United States)

    Mondal, Manas; Gohs, Uwe; Wagenknecht, Udo; Heinrich, Gert

    2013-07-01

    TPVs are a special class of thermoplastic and elastomer blend where cross-linking of elastomeric phase takes place during melt mixing process known as dynamic vulcanization (DV). A 50/50 blend of natural rubber (NR) and polypropylene (PP) were dynamically vulcanized using Electron Induced Reactive Processing (EIReP) as a function of absorbed dose (150, 250, and 350 kGy) at fixed electron energy (1.5 MeV) and dose per rotation. Different methods like tensile test, DSC, melt rheology, and SEM have been employed to understand the structure-property relationship of the prepared samples. The results suggest that EIReP is a novel technique to offer handful of additional features without compromising the end user property.

  18. Kenaf Powder Filled Recycled High Density Polyethylene/Natural Rubber Biocomposites: The Effect of Filler Content

    Directory of Open Access Journals (Sweden)

    Xuan Viet Cao

    2012-09-01

    Full Text Available The performance of kenaf powder (KP as filler for recycled high density polyethylene (rHDPE/natural rubber (NR thermoplastic elastomer (TPE composites was investigated. The composites with different filler loading were prepared in a Haake internal mixer. Increasing KP loading in rHDPE/NR/KP biocomposites reduced the tensile strength, elongation at break but increased the stabilization torque and the tensile modulus. SEM study of fracture surface indicated that fibrillation of rHDPE was reduced and detachment of kenaf powder from polymer matrix was present particularly at high filler loading. These observations were responsible for the deterioration of tensile strength and elongation at break of rHDPE/NR/KP biocomposites. Water absorption study also showed that the water absorption of these biocomposites increased with increasing KP content.

  19. Immobilization of the proteins in the natural rubber with dialdehyde sodium alginate.

    Science.gov (United States)

    Gong, Ying; Liu, Guangjiao; Peng, Wei; Su, Xiaoyu; Chen, Jiping

    2013-11-06

    The biodegradable dialdehyde sodium alginate (DASA) was exploited to immobilize the proteins in the natural rubber latex (NRL) and the variations of the properties for the NRL films were estimated in detail. As demonstrated, the proteins were distributed more uniformly in the NRL films with DASA and the extractable protein (EP) content was effectively decreased. Particularly, the EP content was lowered to a value about 46 μg/g with 0.40% DASA, which could meet with the demands of the allergy protein threshold limit of 50 μg/g as described in ASTM D 5712 standard. Furthermore, there was some improve on the burial degradability of the NRL films modified with DASA. The mechanical properties, however, had no evident variation in the presence of DASA. In conclusion, the immobilization of the proteins with DASA should be a potential alternative to tackle the protein allergy problem for the NRL and its products.

  20. Effect of sucrose acetate isobutyrate ester on the epoxidised natural rubber based magnetorheological elastomers

    Science.gov (United States)

    Khairi, M. H. A.; Mazlan, S. A.; Ubaidillah; Ahmad, K. Z. K.; Aziz, S. A. A.; Yunus, N. A.

    2016-11-01

    In this study, magnetorheological elastomers (MREs) were synthesized by incorporating various amounts of sucrose acetate isobutyrate (SAIB) ester plasticizer dopped in the epoxidized natural rubber (ENR-50) matrix with constant carbonyl iron particles (CIPs) of 60 weight percent. The effect of SAIB insertion on curing characteristics has been observed using a moving die rheometer. The microstructures appearance of the samples were observed using a field emission scanning electron microscope (FESEM). Finally, the magneto-induced storage modulus was measured by using a rheometer 302. The experimental results have demonstrated that the addition of SAIB ester decreased the cure rate index (CRI) by 63% and increased the MR effect by 37%. Observation of microstructure shows that the CIPs embedded well in the matrix and produced the isotropic structure of the MREs. Meanwhile, the fabricated MREs samples were frequencies dependent, where all MREs samples exhibit the incremental trend when increasing the frequencies. The introduction of SAIB has proven to influence the properties of the MREs.

  1. Stress-induced stabilization of crystals in shape memory natural rubber.

    Science.gov (United States)

    Heuwers, Benjamin; Quitmann, Dominik; Hoeher, Robin; Reinders, Frauke M; Tiemeyer, Sebastian; Sternemann, Christian; Tolan, Metin; Katzenberg, Frank; Tiller, Joerg C

    2013-01-25

    In contrast to all known shape memory polymers, the melting temperature of crystals in shape memory natural rubber (SMNR) can be greatly manipulated by the application of external mechanical stress. As shown previously, stress perpendicular to the prior programming direction decreases the melting temperature by up to 40 K. In this study, we investigated the influence of mechanical stress parallel to prior stretching direction during programming on the stability of the elongation-stabilizing crystals. It was found that parallel stress stabilizes the crystals, which is indicated by linear increase of the trigger temperature by up to 17 K. The crystal melting temperature can be increased up to 126.5 °C under constrained conditions as shown by X-ray diffraction measurements.

  2. Data for effects of lanthanum complex on the thermo-oxidative aging of natural rubber

    Directory of Open Access Journals (Sweden)

    Wei Zheng

    2015-12-01

    Full Text Available Novel mixed antioxidants composed of antioxidant IPPD and lanthanum (La complex were added as a filler to form natural rubber (NR composites. By mechanical testing, Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR and thermogravimetric analysis (TGA, a string of data, including the mechanical properties, the variation of internal groups and the thermal and thermo-oxidative decompositions of NR, was presented in this data article. The data accompanying its research article [1] studied the thermo-oxidative aging properties of NR in detail. The density function theoretical (DFT calculations were also used as an assistant to study the thermo-oxidative aging mechanism of NR. The data revealed that this new rare-earth antioxidant could indeed enhance the thermo-oxidative aging resistance of NR, which is associated with its different function mechanism from that of the pure antioxidant IPPD.

  3. Effect of bentonite modification on hardness and mechanical properties of natural rubber nanocomposites

    Science.gov (United States)

    Santiago, Denise Ester O.; Pajarito, Bryan B.; Mangaccat, Winna Faye F.; Tigue, Maelyn Rose M.; Tipton, Monica T.

    2016-05-01

    The effect of sodium activation, ion-exchange with tertiary amine salt, surface treatment with non-ionic surfactant, and wet grinding of bentonite on hardness and mechanical properties of natural rubber nanocomposites (NRN) was studied using full factorial design of experiment. Results of X-ray diffraction (XRD) show increase in basal spacing d of bentonite due to modification, while attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) confirm the organic modification of bentonite. Analysis of variance (ANOVA) shows that the main effect of surface treatment increases the hardness and decreases the tensile modulus of the NRN. The surface treatment and wet grinding of bentonite decrease the tensile stresses at 100, 200 and 300% strain of NRN. Sodium activation and ion-exchange negatively affect the compressive properties, while surface treatment significantly improves the compressive properties of NRN.

  4. Investigation on magnetic field dependent modulus of epoxidized natural rubber based magnetorheological elastomer

    Science.gov (United States)

    Yunus, N. A.; Mazlan, S. A.; Ubaidillah; Aziz, S. A. A.; Khairi, M. H. Ahmad; Wahab, N. A. A.; Shilan, S. T.

    2016-11-01

    This paper presents an investigation on the use of epoxidized natural rubber (ENR) as a matrix of magnetorheological elastomers (MREs). Isotropic ENR-based MRE samples were synthesized by homogeneously mixed the ENR compound with carbonyl iron particles (CIPs). The microstructure of the sample was observed, and the magnetic field-dependent moduli were analyzed using rheometer. The influences of excitation frequency, CIPs content and magnetic field on the field-dependent moduli of ENR-based MREs were evaluated through dynamic shear test. The microstructure of MRE samples demonstrated the dispersed CIPs in the ENR matrix. The remarkable increment of storage and loss moduli of the ENR-based MREs has exhibited the magnetically controllable storage and loss moduli of the samples when exposed to the magnetic field. Consequently, the CIPs content, frequency and magnetic field were significantly influenced the dynamic moduli of the ENR-based MREs.

  5. Comparison of direct and indirect measurement of the elastocaloric effect in natural rubber

    Science.gov (United States)

    Xie, Zhongjian; Sebald, Gael; Guyomar, Daniel

    2016-01-01

    The directly measured temperature change Δ T upon deformation (elastocaloric effect) of natural rubber was compared with indirect method, which is deduced from the Clausius-Clapeyron factor ( ∂ σ / ∂ T ) ɛ , where σ is the stress and ɛ is the strain. The factor ( ∂ σ / ∂ T ) ɛ can be measured by two different methods. One is to measure the stress vs. strain behavior at different static temperatures. It is found that the Δ T deduction is underestimated or even of opposite sign compared with the directly measured one. These behaviors are different from elastocaloric effect of shape memory alloys. An interpretation based on strain-induced crystallite is proposed. The other characterization is to measure the stress vs. temperature at constant strain. It results in a prediction, which is in good quantitative agreement with the directly measured one. The stress appears then to be a non-state variable, thus questioning the ergodicity of the material.

  6. Comparison effects of lanthanum stearate and antioxidants in epoxidized natural rubber

    Institute of Scientific and Technical Information of China (English)

    杨昌金; 罗勇悦; 彭政; 许逵; 钟杰平

    2015-01-01

    This work studied possibilities of using lanthanum stearate (LaSt) as an antioxidant in epoxidized natural rubber containing 25 mol.%expoxidation (ENR25) compounds. For comparison purposes, two commercial antioxidant 4010NA and MB were also used. The influence of LaSt, antioxidant 4010NA and MB on cure characteristics, mechanical properties, crosslink density, hot air aging and thermo-oxidative degradation were studied. The results indicated that the incorporation of LaSt and antioxidants could ac-celerate the vulcanization of ENR. The ENR vulcanizates with antioxidant MB had better mechanical properties than 4010NA and LaSt. Compared with antioxidant 4010NA and MB, the ENR25 vulcanizates with the addition of LaSt exhibited the best hot air aging resistance and thermo-oxidative stability.

  7. Production of Natural Rubber Grafted Styrene Copolymer Latex as Water Base Coatings

    Directory of Open Access Journals (Sweden)

    M Utama

    2006-07-01

    Full Text Available Twelve kinds formulation of natural rubber grafted copolymer styrene (NR-g-S prepared by gamma radiation co-polymerization technique has been carried out. The characteristic of NR-g-S and its water base coating such as molecular structure, particle size, and the properties of latex and its film were evaluated. The results showed that the NR-g-S latex as a water base coating has low viscosity, height strength, good grease resistance, good flexibility, good aging and corrosion resistance on concrete cement and metal. The average particle size is between 270-300 nm, and the bonding between poly-isoprene of NRL and styrene molecules were grafted copolymer

  8. Effect of bentonite modification on hardness and mechanical properties of natural rubber nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Santiago, Denise Ester O. [Polymer Research Laboratory, Department of Chemical Engineering, University of the Philippines, Diliman, Quezon City 1101 Philippines (Philippines); Department of Chemical Engineering, University of the Philippines, Los Baños, College, Laguna 4031 Philippines (Philippines); Pajarito, Bryan B.; Mangaccat, Winna Faye F.; Tigue, Maelyn Rose M.; Tipton, Monica T. [Polymer Research Laboratory, Department of Chemical Engineering, University of the Philippines, Diliman, Quezon City 1101 Philippines (Philippines)

    2016-05-18

    The effect of sodium activation, ion-exchange with tertiary amine salt, surface treatment with non-ionic surfactant, and wet grinding of bentonite on hardness and mechanical properties of natural rubber nanocomposites (NRN) was studied using full factorial design of experiment. Results of X-ray diffraction (XRD) show increase in basal spacing d of bentonite due to modification, while attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) confirm the organic modification of bentonite. Analysis of variance (ANOVA) shows that the main effect of surface treatment increases the hardness and decreases the tensile modulus of the NRN. The surface treatment and wet grinding of bentonite decrease the tensile stresses at 100, 200 and 300% strain of NRN. Sodium activation and ion-exchange negatively affect the compressive properties, while surface treatment significantly improves the compressive properties of NRN.

  9. Suitability of Natural Rubber Latex and Waste Foundry Sand in Cement Concrete

    Directory of Open Access Journals (Sweden)

    Samuel Idiculla Thomas

    2016-06-01

    Full Text Available Suitability of Natural Rubber Latex (NRL as an additive and Waste Foundry Sand (WFS as partial replacement to river sand, in cement concrete was investigated. Experimental study was performed with concrete mixtures containing 1% latex to water ratio, along with 5% and 10% replacement of river sand by WFS. Properties of concrete were studied in both fresh and hardened state. The results of laboratory tests indicate that WFS and NRL reduces the workability of concrete. Slight reduction in splitting tensile strength was observed for mixtures containing NRL and WFS, in comparison to conventional mix. No specific trend was observed for flexural strength at 7 days, but at 28 days the difference was within ±3%, when compared to conventional mix. Strength development for mixtures containing NRL and WFS was slightly lower than conventional mix. The limited results of this study show that concrete containing NRL and WFS do have potential for use as non- structural concrete.

  10. On the nature of the coefficient of friction of diamond-like carbon films deposited on rubber

    NARCIS (Netherlands)

    Martinez-Martinez, D.; van der Pal, J. P.; Schenkel, M.; Shaha, K. P.; Pei, Y. T.; De Hosson, J. Th M.

    2012-01-01

    In this paper, the nature of the coefficient of friction (CoF) of diamond-like carbon (DLC)-protected rubbers is studied. The relative importance of the viscoelastic and adhesive contributions to the overall friction is evaluated experimentally by modifying the contact load and the adhesive strength

  11. Particle size and particle-particle interactions on tensile properties and reinforcement of corn flour particles in natural rubber

    Science.gov (United States)

    Renewable corn flour has a significant reinforcement effect in natural rubber. The corn flour was hydrolyzed and microfluidized to reduce its particle size. Greater than 90% of the hydrolyzed corn flour had an average size of ~300 nm, a reduction of 33 times compared to unhydrolyzed corn flour. Comp...

  12. Effect of added silicon carbide nanowires and carbon nanotubes on mechanical properties of 0-3 natural rubber composites

    Science.gov (United States)

    Janyakunmongkol, Khantichai; Nhuapeng, Wim; Thamjaree, Wandee

    2016-01-01

    In this work, the mechanical properties of 0-3 nanocomposite materials containing silicon carbide nanowires (SiCNWs), carbon nanotubes (CNTs), and natural rubber were studied. The SiCNWs and CNTs were used as reinforcement fiber whereas natural rubber was used as the matrix phase. The chemical vapor depositions (CVD) was used for synthesizing the nanowire and nanotube phases. The volume fraction of reinforcement was varied from 0 to 10%. The nanophases were mixed in the natural rubber matrix and molded by the hand lay-up technique. The mechanical properties of the samples were examined and compared with those of neat natural rubber. From the results, it was found that the hardness and density of the samples increased with the quantities of nanophases. The nanocomposites with a volume fraction of 10% exhibited maximum hardness (50.5 SHORE A). The maximum tensile strength and extent of elongation at break of the samples were obtained from the 4% volume fraction sample, which were 16.13 MPa and 1,540%, respectively.

  13. Effect of different plasticizers on the properties of bio-based thermoplastic elastomer containing poly(lactic acid and natural rubber

    Directory of Open Access Journals (Sweden)

    V. Tanrattanakul

    2014-06-01

    Full Text Available Bio-based thermoplastic elastomers (TPE containing natural rubber and poly(lactic acid were prepared by melt blending in an internal mixer. The blend ratio was 60% of natural rubber and 40% of poly(lactic acid. Dynamic vulcanization of natural rubber was performed with the sulfur system. The 2 mm – thick sheet samples were prepared by compression molding. The objective of this study was to investigate the effect of plasticization of PLA on the mechanical and physical properties of the derived TPE. Four plasticizers were selected: tributyl acetyl citrate (TBAC, tributyl citrate (TBC, glycerol triacetate (GTA, and triethyl-2-acetyl citrate (TEAC. The investigated properties were the tensile properties, tear strength, thermal ageing and ozone resistance, hardness, resilience, tension set and compression set. All plasticizers increased the strain at break. TBAC and TBC increased the stress at break. All plasticizers decreased the tear strength, hardness and resilience, and slightly changed the tension and compression set. TBAC seemed to be the best plasticizer for the TPE. The presence of 4 pph (parts per hundred resin of plasticizer provided the highest strength and tensile toughness and the strain at break increased with the increasing plasticizer content. The plasticizers decreased the Tg and Tcc of the PLA and did not affect the degree of crystallinity of PLA in the TPE.

  14. A smart surface from natural rubber: the mechanism of entropic control at the surface monitored by contact angle measurement

    Directory of Open Access Journals (Sweden)

    Sureurg Khongtong

    2006-03-01

    Full Text Available Surface oxidation of crosslinked natural rubber provided a hydrophilic substrate (sticky surface that became more hydrophobic (less sticky when equilibrated against hot water. This unusual temperaturedependent surface reconstruction is interpreted as the result of recoiling of entropic unfavorable uncoiled chains induced when rubber surface was oxidized. Subsequent equilibration of these annealed samples against water at room temperature returned their original hydrophilicity. The degree of this surface reconstruction and its kinetics are also dependent on the amounts of crosslinking of the samples.

  15. New evidence disclosed for networking in natural rubber by dielectric relaxation spectroscopy.

    Science.gov (United States)

    Liu, Jie; Wu, Siwu; Tang, Zhenghai; Lin, Tengfei; Guo, Baochun; Huang, Guangsu

    2015-03-21

    Resolving the structure of natural rubber (NR) has been an important issue for a long time and essential progress has been made. It is well established that non-rubber components have significant effects on the performance of NR. A detailed discussion on the effects of proteins and phospholipids on the chain dynamics of NR will be crucial for the in-depth understanding of the role of proteins and phospholipids in NR. However, to date, there is still a lack of elaborate studies on the dielectric spectroscopy of NR. In the present study, we performed detailed dielectric relaxation analysis, together with rheological measurements, to reveal the effects of proteins and phospholipids on the chain dynamics of NR. Distinctly different from the widely accepted segmental mode (SM) and normal mode (NM), a new relaxation mode in deproteinized NR (DPNR) was identified for the first time, which cannot be found either in NR or in transesterified DPNR (TE-DPNR). Because this new mode relaxation process behaves as a thermally activated process and it is about four orders of magnitude slower than NM, it could be rationally attributed to the relaxation of the phospholipids core of DPNR, named branch mode (BM) relaxation. When further conversion of DPNR to TE-DPNR was conducted, the phospholipids were removed and BM disappeared. In addition, a new relaxation mode, which occurs at considerably lower temperature than that for SM, was revealed in TE-DPNR, and may be related to the relaxation of free mono- or di-phosphate groups at the α ends in TE-DPNR. Hence, the identification of the new relaxation modes in DPNR and TE-DPNR provide new evidence for the natural networking structure linked by protein-based ω ends and phospholipids-based α ends.

  16. Effects of Thermal and Humidity Aging on the Interfacial Adhesion of Polyketone Fiber Reinforced Natural Rubber Composites

    Directory of Open Access Journals (Sweden)

    Han Ki Lee

    2016-01-01

    Full Text Available Polyketone fiber is considered as a reinforcement of the mechanical rubber goods (MRG such as tires, automobile hoses, and belts because of its high strength and modulus. In order to apply it to those purposes, the high adhesion of fiber/rubber interface and good sustainability to aging conditions are very important. In this study, polyketone fiber reinforced natural rubber composites were prepared and they were subjected to thermal and humidity aging, to assess the changes of the interfacial adhesion and material properties. Also, the effect of adhesive primer treatment, based on the resorcinol formaldehyde resin and latex (RFL, of polyketone fiber for high interfacial adhesion was evaluated. Morphological and property changes of the rubber composites were analyzed by using various instrumental analyses. As a result, the rubber composite was aged largely by thermal aging at high temperature rather than humidity aging condition. Interfacial adhesion of the polyketone/NR composites was improved by the primer treatment and its effect was maintained in aging conditions.

  17. Elastomers for Tracked Vehicles: 1980-1997 Program to Improve Durability of Rubber Tank Pads for Army Tracked Vehicles

    Science.gov (United States)

    2015-06-01

    blends of the polymers styrene butadiene rubber , natural rubber , and... Natural -SBR-PBD rubber blends : formulations .........................................................50 Table 15b Natural -SBR-PBD rubber blends ...properties .............................................................53 Table 16a SBR blends with natural and polybutadiene rubber

  18. Cross-border forest disturbance and the role of natural rubber in mainland Southeast Asia using annual Landsat time series

    DEFF Research Database (Denmark)

    Grogan, Kenneth; Pflugmacher, Dirk; Hostert, Patrick

    2015-01-01

    ) are there cross border differences in frontier and non-frontier forest disturbance rates between Cambodia and Vietnam, 3) what proportion of disturbances in frontier and non-frontier forests can be accounted for by the impact of rubber plantations, and 4) is there a relationship between global market prices...... rates related to rubber plantation expansion and price fluctuations of natural rubber. This suggests links between localized land cover/use change and international market forces, irrespective of differing political and socioeconomic backgrounds. Our study underlines the value of using dense Landsat...... that this approach can provide accurate forest disturbance maps but that accuracy is affected by forest type. Highest accuracies were found in evergreen forest (90%), with lower accuracies in mixed (80%) and dry-deciduous forest types (83%). Our final map considering all forest types yielded an overall accuracy...

  19. The influence of Rice Husk Fiber on The Properties of Epoxidized Natural Rubber/Rice Husk Compounds

    Directory of Open Access Journals (Sweden)

    Dahham Omar S.

    2016-01-01

    Full Text Available In this work, curing characteristics, tensile and physical properties of epoxidized natural rubber/rice husk (ENR-50/RH compounds were investigated. Different RH loading (10, 20, 30, 40 and 50 Phr and size (fine size at 100-300 μm and coarse size at 5-10 mm were prepared and used. Results indicated that the scorch time (t2 and cure time (t90 became shorter with increasing RH content. In contrast, minimum torque (ML and maximum torque (MH increased with increasing RH content in the rubber compounds. Hardness and crosslink density showed improvement with increasing RH content. Tensile strength (Ts and elongation at break (Eb decreased slightly as RH content increased. However, the fine size of RH recorded better overall properties compared to the RH coarse size at same loading the rubber compound.

  20. A lettuce (Lactuca sativa) homolog of human Nogo-B receptor interacts with cis-prenyltransferase and is necessary for natural rubber biosynthesis.

    Science.gov (United States)

    Qu, Yang; Chakrabarty, Romit; Tran, Hue T; Kwon, Eun-Joo G; Kwon, Moonhyuk; Nguyen, Trinh-Don; Ro, Dae-Kyun

    2015-01-23

    Natural rubber (cis-1,4-polyisoprene) is an indispensable biopolymer used to manufacture diverse consumer products. Although a major source of natural rubber is the rubber tree (Hevea brasiliensis), lettuce (Lactuca sativa) is also known to synthesize natural rubber. Here, we report that an unusual cis-prenyltransferase-like 2 (CPTL2) that lacks the conserved motifs of conventional cis-prenyltransferase is required for natural rubber biosynthesis in lettuce. CPTL2, identified from the lettuce rubber particle proteome, displays homology to a human NogoB receptor and is predominantly expressed in latex. Multiple transgenic lettuces expressing CPTL2-RNAi constructs showed that a decrease of CPTL2 transcripts (3-15% CPTL2 expression relative to controls) coincided with the reduction of natural rubber as low as 5%. We also identified a conventional cis-prenyltransferase 3 (CPT3), exclusively expressed in latex. In subcellular localization studies using fluorescent proteins, cytosolic CPT3 was relocalized to endoplasmic reticulum by co-occurrence of CPTL2 in tobacco and yeast at the log phase. Furthermore, yeast two-hybrid data showed that CPTL2 and CPT3 interact. Yeast microsomes containing CPTL2/CPT3 showed enhanced synthesis of short cis-polyisoprenes, but natural rubber could not be synthesized in vitro. Intriguingly, a homologous pair CPTL1/CPT1, which displays ubiquitous expressions in lettuce, showed a potent dolichol biosynthetic activity in vitro. Taken together, our data suggest that CPTL2 is a scaffolding protein that tethers CPT3 on endoplasmic reticulum and is necessary for natural rubber biosynthesis in planta, but yeast-expressed CPTL2 and CPT3 alone could not synthesize high molecular weight natural rubber in vitro. © 2015 by The American Society for Biochemistry and Molecular Biology, Inc.

  1. A Lettuce (Lactuca sativa) Homolog of Human Nogo-B Receptor Interacts with cis-Prenyltransferase and Is Necessary for Natural Rubber Biosynthesis*

    Science.gov (United States)

    Qu, Yang; Chakrabarty, Romit; Tran, Hue T.; Kwon, Eun-Joo G.; Kwon, Moonhyuk; Nguyen, Trinh-Don; Ro, Dae-Kyun

    2015-01-01

    Natural rubber (cis-1,4-polyisoprene) is an indispensable biopolymer used to manufacture diverse consumer products. Although a major source of natural rubber is the rubber tree (Hevea brasiliensis), lettuce (Lactuca sativa) is also known to synthesize natural rubber. Here, we report that an unusual cis-prenyltransferase-like 2 (CPTL2) that lacks the conserved motifs of conventional cis-prenyltransferase is required for natural rubber biosynthesis in lettuce. CPTL2, identified from the lettuce rubber particle proteome, displays homology to a human NogoB receptor and is predominantly expressed in latex. Multiple transgenic lettuces expressing CPTL2-RNAi constructs showed that a decrease of CPTL2 transcripts (3–15% CPTL2 expression relative to controls) coincided with the reduction of natural rubber as low as 5%. We also identified a conventional cis-prenyltransferase 3 (CPT3), exclusively expressed in latex. In subcellular localization studies using fluorescent proteins, cytosolic CPT3 was relocalized to endoplasmic reticulum by co-occurrence of CPTL2 in tobacco and yeast at the log phase. Furthermore, yeast two-hybrid data showed that CPTL2 and CPT3 interact. Yeast microsomes containing CPTL2/CPT3 showed enhanced synthesis of short cis-polyisoprenes, but natural rubber could not be synthesized in vitro. Intriguingly, a homologous pair CPTL1/CPT1, which displays ubiquitous expressions in lettuce, showed a potent dolichol biosynthetic activity in vitro. Taken together, our data suggest that CPTL2 is a scaffolding protein that tethers CPT3 on endoplasmic reticulum and is necessary for natural rubber biosynthesis in planta, but yeast-expressed CPTL2 and CPT3 alone could not synthesize high molecular weight natural rubber in vitro. PMID:25477521

  2. Load Absorption Characteristics of Tyre Production Waste Rubber for Playground Floor Systems

    Directory of Open Access Journals (Sweden)

    Abdul Ghani A.N.

    2014-01-01

    Full Text Available The floor surfaces where slides and swings are placed in parks and playrooms should be soft and thick to ensure that whenever a child falls, the surface can withstand the impact and minimize injuries to the child. Shredded tyres from waste tyres or waste rubber from tyre manufacturing could become beneficial as shock absorber material which can be used as a playground floor. In this study, rubber cubes and rubber pads with 5%, 8% and 10% SBR mixes were prepared for mechanical testing. Two types of floor design surfaces with and without plywood on the surface were assembled for the shock test. Gmax and HIC of this waste rubber flooring system were investigated using the compression test for the rubber cube and the drop test for the rubber pad. The criteria of general protection standards are 200g for optimum acceleration and 1000 for HIC. The Gmax and HIC results indicated that the material and system could ensure a safe fall from up to 1.0m height.

  3. Reinforcement of natural rubber latex with silica modified by cerium oxide:preparation and properties

    Institute of Scientific and Technical Information of China (English)

    张福全; 廖禄生; 王永周; 汪月琼; 黄红海; 李普旺; 彭政; 曾日中

    2016-01-01

    Variable masses of nano cerium oxide (CeO2) were added into nano silica (SiO2) to prepare the well-dispersed SiO2-CeO2 suspension (SiO2-CeO2), cetyltrimethyl ammonium bromide (CTAB) was used to adjust the compatibility of SiO2-CeO2 with rubber matrix, then SiO2-CeO2 modified by CTAB and curing formulas were mixed with fresh natural rubber (NR) latex to prepare NR/SiO2-CeO2 nanocomposites that contained 0–10 parts of CeO2 by a new emulsion compounding method. The morphologies, cure characteristics, mechanical properties and thermal-oxidative stability of NR/SiO2-CeO2 nanocomposites were investigated. The re-sults revealed that the presence of CeO2 in NR/SiO2-CeO2nanocomposites was favorable for enhancing the interaction between NR matrix and fillers, helped to get smaller SiO2-CeO2 particles with narrower particle size distribution, further improved the crosslink densities and mechanical properties of NR/SiO2-CeO2 nanocomposites vulcanizates. Meanwhile, the addition of CeO2 increased the active energy at least 4.66%, obviously improved the thermal-oxidative aging-inhibiting properties of NR/SiO2-CeO2 nanocomposites. Additionally, nanocomposites containing CeO2 promotedTg shift to high temperature direction, causing the nanocomposites featured higher tanδ at 0 ºC and lower tanδ at 60 ºC and exhibited comparable wet grip and lower rolling resistance when NR/SiO2-CeO2nano-composites were used in tire tread compound.

  4. In situ generated silica in natural rubber latex via the sol–gel technique and properties of the silica rubber composites

    Energy Technology Data Exchange (ETDEWEB)

    Poompradub, Sirilux, E-mail: sirilux.p@chula.ac.th [Department of Chemical Technology, Faculty of Science, Chulalongkorn University, 254 Phayathai Road, Bangkok 10330 (Thailand); Thirakulrati, Mantana [Program in Petrochemistry and Polymer Science, Faculty of Science, Chulalongkorn University, 254 Phayathai Road, Bangkok 10330 (Thailand); Prasassarakich, Pattarapan [Department of Chemical Technology, Faculty of Science, Chulalongkorn University, 254 Phayathai Road, Bangkok 10330 (Thailand)

    2014-03-01

    Natural rubber (NR) composites reinforced by silica generated in situ within the NR matrix were prepared by the sol–gel process using tetraethoxysilane (TEOS) as the silica precursor. The effect of the TEOS content, water: TEOS mole ratio, reaction time and temperature on the in situ silica content formed in the NR latex were investigated. The results indicated that the suitable condition to produce a high silica content (54 parts by weight per hundred parts of rubber (phr)) in the rubbery matrix was the use of 200 phr TEOS and a water: TEOS mole ratio of 28.9:1 at room temperature for 24 h. The curing, mechanical, and thermal properties of the composite materials were also investigated. Increasing the in situ silica content increased the cure time and improved the mechanical properties of the composite. Compared to the NR vulcanizates filled with the commercial (ex situ formed) silica, the mechanical and thermal properties of the in situ silica composite material were significantly improved. Transmission electron microscopy revealed that the in situ formed silica particles were well distributed within the NR matrix, in contrast to the clumping of the ex situ formed commercial silica within the NR matrix. - Highlights: • High in situ silica content in NR latex was obtained up to 54 phr. • A good dispersion of in situ silica filling into the rubbery matrix. • Comparison of silica generated in the rubber matrix using solid, solution and latex NR substrates. • A good reinforcement effect of in situ silica was observed on the NR vulcanizate. • Sol–gel method is an alternative way to develop a novel composite material.

  5. 中国天然橡胶产业现状及其发展建议%Current Situation of Chinese Natural Rubber Industry and Development Suggestions

    Institute of Scientific and Technical Information of China (English)

    祁栋灵; 王秀全; 张志扬; 黄月球

    2013-01-01

    This paper analyzes general situation of development in Chinese natural rubber industry, the industrial status and role of Chinese natural rubber industry, as well as establish production impetus of Chinese rubber science & technology to rubber production, and putting forward some suggestions on how to improve Chinese natural rubber industry.%从我国天然橡胶产业发展概况、产业的地位和作用,以及我国橡胶科技对植胶生产的推动作用等方面对中国天然橡胶产业发展现状进行了综述,并提出了促进我国天然橡胶产业发展提升的建议.

  6. Observation of immobile regions in natural rubber at ambient temperature by solid-state C-13 CP/MAS NMR spectroscopy

    DEFF Research Database (Denmark)

    Larsen, F.H.; Rasmussen, T.; Pedersen, Walther Batsberg

    1999-01-01

    Employing C-13 CP/MAS NMR spectroscopy, the existence of immobile regions in natural rubber (cis-1,4-polyisoprene) corresponding to a few percent of the monomer units has been detected at ambient temperature. For synthetic rubbers no immobile regions have been detected at all. Applying different...

  7. PENINGKATAN PRODUKTIVITAS PROSES BUDIDAYA KARET ALAM DENGAN PENDEKATAN GREEN PRODUCTIVITY: STUDI KASUS DI PT. XYZ (The Increase of Natural Rubber Plantations Productivity with Green Productivity Approach: a Case Study at PT. XYZ)

    OpenAIRE

    Marimin Marimin; Muhammad Arif Darmawan; Machfud Machfud; Muhammad Panji Islam Fajar Putra

    2014-01-01

    Indonesia is the second largest natural rubber producer in the world with 28% of the total world production in 2010. In line with the growth of the world’s automotive industry, the needs of natural rubber as a complementary synthetic rubber products will also increase. The main objective of this research was to find the best alternative strategy to increase the productivity of the natural rubber plantations through the green productivity (GP) approach. The case study was conducted at PT. XYZ,...

  8. THE EFFLUENT OF NATURAL-RUBBER FACTORIES IS ENRICHED IN THE ANTIFUNGAL PROTEIN HEVEIN

    NARCIS (Netherlands)

    SOEDJANAATMADJA, UMS; SUBROTO, T; BEINTEMA, JJ

    1995-01-01

    Hevein is a small cystine-rich protein with a polypeptide chain length of 43 residues. It occurs in the lutoid body fraction of rubber latex, has affinity for chitin, and inhibits fungal growth. It was isolated from the effluent of a rubber factory in a yield of about 0.7 g/l. The elution position o

  9. Effect of blend ratio on aging, oil and ozone resistance of silica-filled chloroprene rubber/natural rubber (CR/NR blends

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available The effect of blend ratio on properties of chloroprene rubber/natural rubber (CR/NR blends was investigated. In addition to the mechanical properties, attention was also given to the resistance to thermal aging, oil and ozone of the blends. Silica was selected as a reinforcing filler in this study due to its unique characteristic to interact with CR. The results reveal that, due to the better filler dispersion and the greater crosslink density, the silica-filled CR possesses lower compound viscosity and better mechanical properties, compared to the silica-filled NR. The aging properties, oil and ozone resistance of the silica-filled CR are also significantly better than those of the silica-filled NR. The mechanical properties and the resistance to degradation of the silica-filled CR/NR blends are mainly governed by the blend morphology. It is found that good mechanical properties in association with adequately high resistance to degradation from thermal aging and oil are obtained when CR remains the matrix in the blends. Even though the ozone cracks are found in all blends, a thorough look at the results reveals that considerable improvement in ozone resistance is achieved with increasing CR content.

  10. A comparison of the abilities of natural rubber (NR) and synthetic polyisoprene cis-1,4 rubber (IR) to crystallize under strain at high strain rates.

    Science.gov (United States)

    Candau, Nicolas; Chazeau, Laurent; Chenal, Jean-Marc; Gauthier, Catherine; Munch, Etienne

    2016-02-07

    Strain induced crystallization (SIC) of a natural rubber (NR) and a synthetic rubber (IR) with a high amount of cis-1,4 units (98.6%) is studied, thanks to in situ wide angle X-ray (WAXS) experiments at room temperature performed in a large range of strain rates. During stretching at a low strain rate (4.2 × 10(-3) s(-1)), SIC in IR occurs at a larger stretching ratio than in NR. As a result, the crystallinity index at a given stretching ratio is lower in IR than in NR, in spite of the similar crosslink densities of the chains involved in the crystallization in both materials. This lower ability for crystallization in IR is attributed to the presence of branching along its backbone and its lower stereoregularity. Conversely, dynamic experiments performed at high strain rates (10(1)/10(2) s(-1)) show for both materials a similar ability to crystallize. This unexpected result is confirmed by monotonic tensile tests performed in a large range of strain rates. The reason is thermodynamic: the chain extension plays a predominant role compared to the role of the microstructure defects when the strain rate is high, i.e. when the kinetics of the crystallite nucleation forces the crystallization to occur at a large stretching ratio. A thermodynamic model enables qualitative reproduction of the experimental results.

  11. A novel use of bio-based natural fibers, polymers, and rubbers for composite materials

    Science.gov (United States)

    Modi, Sunny Jitendra

    The composites, materials, and packaging industries are searching for alternative materials to attain environmental sustainability. Bio-plastics are highly desired and current microbially-derived bio-plastics, such as PHA (poly-(hydroxy alkanoate)), PHB (poly-(hydroxybutyrate)), and PHBV (poly-(beta-hydroxy butyrate-co-valerate)) could be engineered to have similar properties to conventional thermoplastics. Poly-(hydroxybutyrate) (PHB) is a bio-degradable aliphatic polyester that is produced by a wide range of microorganisms. Basic PHB has relatively high glass transition and melting temperatures. To improve flexibility for potential packaging applications, PHB is synthesized with various co-polymers such as Poly-(3-hydroxyvalerate) (HV) to decrease the glass and melting temperatures and, since there is improved melt stability at lower processing temperatures, broaden the processing window. However, previous work has shown that this polymer is too brittle, temperature-sensitive, and hydrophilic to meet packaging material physical requirements. Therefore, the proposed work focuses on addressing the needs for bio-derived and bio-degradable materials by creating a range of composite materials using natural fibers as reinforcement agents in bio-polymers and bio- plastic-rubber matrices. The new materials should possess properties lacking in PHBV and broaden the processing capabilities, elasticity, and improve the mechanical properties. The first approach was to create novel composites using poly-(beta-hydroxy butyrate-co-valerate) (PHBV) combined with fibers from invasive plants such as common reed (Phragmites australis), reed canary grass (Phalaris arundinacea), and water celery ( Vallisneria americana). The composites were manufactured using traditional processing techniques of extrusion compounding followed by injection molding of ASTM type I parts. The effects of each bio-fiber at 2, 5, and 10% loading on the mechanical, morphological, rheological, and thermal

  12. Inducing uniform single-crystal like orientation in natural rubber with constrained uniaxial stretch.

    Science.gov (United States)

    Zhou, Weiming; Meng, Lingpu; Lu, Jie; Wang, Zhen; Zhang, Wenhua; Huang, Ningdong; Chen, Liang; Li, Liangbin

    2015-07-07

    The effect of flow on crystallization is commonly attributed to entropic reduction, which is caused by stretch and orientation of polymer chains but overlooks the role of flow on final-state free energy. With the aid of in situ synchrotron radiation wide-angle X-ray diffraction (WAXD) and a homemade constrained uniaxial tensile testing machine, polycrystals possessing single-crystal-like orientation rather than uniaxial orientation are found during the constrained stretch of natural rubber, whereas the c-axis and a-axis align in the stretch direction (SD) and constrained direction (CD), respectively. Molecular dynamics simulation shows that aligning the a-axis of crystal nuclei in CD leads to the lowest free energy increase and favors crystal nucleation. This indicates that the nomenclature of strain-induced crystallization may not fully account for the nature of flow-induced crystallization (FIC) as strain mainly emphasizes the entropic reduction of initial melt, whereas stress rather than strain plays the dominant role in crystal deformation. The current work not only contributes to a comprehensive understanding of the mechanism of flow-induced crystallization but also demonstrates the potential application of constrained uniaxial tensile stretch for the creation of functional materials containing polycrystals that possess single-crystal-like orientation.

  13. Mechanical Properties and Morphological Characterization of PLA/Chitosan/Epoxidized Natural Rubber Composites

    Directory of Open Access Journals (Sweden)

    Zainoha Zakaria

    2013-01-01

    Full Text Available Poly (lactic acid (PLA/chitosan (CS natural polymer/epoxidised natural rubber (ENR composites were successfully prepared through a solution casting method. The morphological characteristics of fabricated composites were investigated by scanning electron microscopy (SEM and optical microscopy. The microstructure of PLA/ENR was significantly altered with the addition of CS. SEM analysis of composites fractured surfaces revealed smooth and homogeneous texture and good dispersion of CS. However for 15 wt% CS composites, the phase segregation and poor adhesion between the polymers were observed. Fourier transform infrared spectroscopy revealed some levels of attractive interaction between CS, PLA, and ENR in the composites. The mechanical properties of composites in terms of tensile strength and tensile modulus were significantly improved with the addition of CS into the matrix while the percent elongation at break decreased. The tensile strength increased up to 5 wt% CS loading for both PLA/CS and PLA/ENR/CS and thereafter decreased while Young’s modulus increased up to 10 wt%. However, when the CS content was increased to 15 wt%, the tensile strength and tensile modulus were slightly decreased. These improvements were attributed to good dispersion of CS at the optimum filler levels and attractive interaction between the composites components.

  14. IMPACT OF STAND STRUCTURE TO THE DIVERSITY OF TREE SAPLING IN RUBBER AGROFOREST SYSTEM

    Directory of Open Access Journals (Sweden)

    Saida Rasnovi

    2013-10-01

    Full Text Available The study of stand structure of rubber agroforest system and its effect on tree sapling diversity was carried out in Bungo District, Jambi Province from August 2004 to August 2005. Basal area (BA and tree density were surveyed using variable-area transect method. Tree sapling species was surveyed using standard plots combined with circular elementary subplots laid along 60 m transect line. The result shown that BA and tree density of rubber agroforest system were lower significantly with forest at the diameter class > 30 cm, but at the diameter class < 30 cm there were not differ significantly. PCA analysis shown there was a positive correlation between BA non rubber tree with the species diversity and richness indices of tree sapling in rubber agroforest system and there was no correlation between density of non rubber tree and the indices. However, in the forest, BA and tree density were have a negative correlation with the species diversity and richness indices of tree sapling.

  15. Comparative Study of Natural Rubber Latex Condom Labeling Regulation in USA and China%中美天然胶乳避孕套说明书及标签管理法规比较研究

    Institute of Scientific and Technical Information of China (English)

    杨晓冬

    2012-01-01

    Objective Provide references for the standardized management of labeling for natural rubber latex condom in China. Methods By content analysis, compare U.S. FDA regulations on labeling for natural rubber latex condom with China SFDA's. Results U.S. FDA regulatory system for natural rubber latex condom labeling is complete, which can effectively control the risk of natural rubber latex condom, being operational, it is worth for the relevant regulatory authorities in China to learn from. Conclusion China can improve the natural rubber latex condom labeling regulations construction and management from the following areas: to amend the medical equipment manuals, labels and packaging and labeling regulations, as soon as possible, it is necessary to formulate the terms of natural rubber latex condoms; to establish guidance document of labeling for natural rubber latex condom; to create the database platform of labeling for natural rubber latex condom to query.%目的 为我国天然胶乳橡胶避孕套标签的规范化管理提供借鉴.方法 采用内容分析的方法,对目前美国FDA及我国SFDA关于天然胶乳橡胶避孕套标签的管理法规进行对比分析.结果 美国FDA关于天然胶乳橡胶避孕套标签的管理法规体系完整、完善,对产品的风险可以进行有效控制,操作性强,值得我国有关监管机构借鉴.结论 我国可从以下方面完善天然胶乳橡胶避孕套标签的法规建设和管理:①尽快修订《医疗器械说明书、标签及包装标识的管理规定》,对天然胶乳橡胶避孕套制订针对性条款;②配套出台天然胶乳橡胶避孕套标签指导原则;③建立标签查询数据库平台.

  16. Estimating the concentration of gold nanoparticles incorporated on natural rubber membranes using multi-level starlet optimal segmentation

    Energy Technology Data Exchange (ETDEWEB)

    Siqueira, A. F. de, E-mail: siqueiraaf@gmail.com; Cabrera, F. C., E-mail: flavioccabrera@yahoo.com.br [UNESP – Univ Estadual Paulista, Dep de Física, Química e Biologia (Brazil); Pagamisse, A., E-mail: aylton@fct.unesp.br [UNESP – Univ Estadual Paulista, Dep de Matemática e Computação (Brazil); Job, A. E., E-mail: job@fct.unesp.br [UNESP – Univ Estadual Paulista, Dep de Física, Química e Biologia (Brazil)

    2014-12-15

    This study consolidates multi-level starlet segmentation (MLSS) and multi-level starlet optimal segmentation (MLSOS) techniques for photomicrograph segmentation, based on starlet wavelet detail levels to separate areas of interest in an input image. Several segmentation levels can be obtained using MLSS; after that, Matthews correlation coefficient is used to choose an optimal segmentation level, giving rise to MLSOS. In this paper, MLSOS is employed to estimate the concentration of gold nanoparticles with diameter around 47  nm, reduced on natural rubber membranes. These samples were used for the construction of SERS/SERRS substrates and in the study of the influence of natural rubber membranes with incorporated gold nanoparticles on the physiology of Leishmania braziliensis. Precision, recall, and accuracy are used to evaluate the segmentation performance, and MLSOS presents an accuracy greater than 88 % for this application.

  17. ASSESSMENT OF DROUGHT TOLERANCE IN FEW CLONES OF NATURAL RUBBER (Hevea brasiliensis UNDER DRY HOT CLIMATE OF ODISHA, INDIA

    Directory of Open Access Journals (Sweden)

    Krishan B

    2017-02-01

    Full Text Available A preliminary study was conducted to assess the drought tolerance at the early stages of growth in different clones of natural rubber (Hevea brasiliensis at the Regional Research Station of Rubber Research Institute of India at Kadalipal, Dhenkanal, Odisha in eastern region of India. Poly bag plants of five clones RRII 430, RRII 105, RRIM 600, RRII 208 and IRCA 111 were assessed for the drought tolerance and compared drought injury indices status with same clones growing naturally in the adjoining field. Results of drought injury indicated scorching, leaf yellowing, drying and leaf fall at regular intervals, since imposition of drought stress conditions. Among various tested clones RRIM 600 and RRII 430 have comparatively higher drought tolerant. Plants under field condition showed drought injury symptoms much later than the poly bag plants. Drought indices, tolerance of drought of different clones and possible reasons have been also discussed

  18. Stretchable and Flexible High-Strain Sensors Made Using Carbon Nanotubes and Graphite Films on Natural Rubber

    Directory of Open Access Journals (Sweden)

    Sreenivasulu Tadakaluru

    2014-01-01

    Full Text Available Conventional metallic strain sensors are flexible, but they can sustain maximum strains of only ~5%, so there is a need for sensors that can bear high strains for multifunctional applications. In this study, we report stretchable and flexible high-strain sensors that consist of entangled and randomly distributed multiwall carbon nanotubes or graphite flakes on a natural rubber substrate. Carbon nanotubes/graphite flakes were sandwiched in natural rubber to produce these high-strain sensors. Using field emission scanning electron microscopy, the morphology of the films for both the carbon nanotube and graphite sensors were assessed under different strain conditions (0% and 400% strain. As the strain was increased, the films fractured, resulting in an increase in the electrical resistance of the sensor; this change was reversible. Strains of up to 246% (graphite sensor and 620% (carbon nanotube sensor were measured; these values are respectively ~50 and ~120 times greater than those of conventional metallic strain sensors.

  19. Research progress of the modification of natural rubber latex%天然胶乳改性研究进展

    Institute of Scientific and Technical Information of China (English)

    刘东辉; 徐亚丽; 孟丽丰

    2012-01-01

    介绍了天然胶乳的特点,综述了天然胶乳填料改性(纳米粒子改性和非纳米粒子改性)及化学改性(氯化、环化、环氧化、接枝聚合)的研究进展,分析了目前天然胶乳改性存在的问题,并展望了未来的发展趋势.%The characteristics of natural rubber latex had been introduced. The research progress of modification on the natural rubber latex was reviewed. Filler modification (including nano-particles and other particles) and chemical modification (including chlorination, cyclization, epoxidation, graft polymerization) were all studied. The main problems that existed at present were analyzed,and finally the future research trend was prospected.

  20. Stretchable and flexible high-strain sensors made using carbon nanotubes and graphite films on natural rubber.

    Science.gov (United States)

    Tadakaluru, Sreenivasulu; Thongsuwan, Wiradej; Singjai, Pisith

    2014-01-06

    Conventional metallic strain sensors are flexible, but they can sustain maximum strains of only ~5%, so there is a need for sensors that can bear high strains for multifunctional applications. In this study, we report stretchable and flexible high-strain sensors that consist of entangled and randomly distributed multiwall carbon nanotubes or graphite flakes on a natural rubber substrate. Carbon nanotubes/graphite flakes were sandwiched in natural rubber to produce these high-strain sensors. Using field emission scanning electron microscopy, the morphology of the films for both the carbon nanotube and graphite sensors were assessed under different strain conditions (0% and 400% strain). As the strain was increased, the films fractured, resulting in an increase in the electrical resistance of the sensor; this change was reversible. Strains of up to 246% (graphite sensor) and 620% (carbon nanotube sensor) were measured; these values are respectively ~50 and ~120 times greater than those of conventional metallic strain sensors.

  1. Engineering characterisation of epoxidized natural rubber-modified hot-mix asphalt.

    Science.gov (United States)

    Al-Mansob, Ramez A; Ismail, Amiruddin; Yusoff, Nur Izzi Md; Rahmat, Riza Atiq O K; Borhan, Muhamad Nazri; Albrka, Shaban Ismael; Azhari, Che Husna; Karim, Mohamed Rehan

    2017-01-01

    Road distress results in high maintenance costs. However, increased understandings of asphalt behaviour and properties coupled with technological developments have allowed paving technologists to examine the benefits of introducing additives and modifiers. As a result, polymers have become extremely popular as modifiers to improve the performance of the asphalt mix. This study investigates the performance characteristics of epoxidized natural rubber (ENR)-modified hot-mix asphalt. Tests were conducted using ENR-asphalt mixes prepared using the wet process. Mechanical testing on the ENR-asphalt mixes showed that the resilient modulus of the mixes was greatly affected by testing temperature and frequency. On the other hand, although rutting performance decreased at high temperatures because of the increased elasticity of the ENR-asphalt mixes, fatigue performance improved at intermediate temperatures as compared to the base mix. However, durability tests indicated that the ENR-asphalt mixes were slightly susceptible to the presence of moisture. In conclusion, the performance of asphalt pavement can be enhanced by incorporating ENR as a modifier to counter major road distress.

  2. Cure and mechanical properties of recycled NdFeB–natural rubber composites

    Indian Academy of Sciences (India)

    P Saramolee; P Lertsuriwat; A Hunyek; C Sirisathitkul

    2010-10-01

    Magnetic polymer composites containing recycled neodymium–iron–boron (NdFeB) powder and natural rubber (NR) were prepared by the two-roll mill technique. Their mechanical and cure properties were studied as a function of NdFeB loading from 0–120 phr. With increasing magnetic loading, the cure time of the NdFeB–NR composites were exponentially decreased because of the reduction of the polymer chain crosslink. The tensile strength of the NR compound, related to the cure characteristics, was reduced by 40% by the addition of 10 phr NdFeB fillers because of the inhibition of the stress-induced crystallization. However, the variation in loading from 30–90 phr has modest effects on the tensile strength as well as elongation at break and the hardness. Furthermore, recycled NdFeB–NR composites had higher modulus and lower percentage of swelling in this magnetic loading regime. Simple tests confirmed the distribution of magnetic stray field around pieces of NdFeB–NR composites.

  3. Green natural rubber-g-modified starch for controlling urea release.

    Science.gov (United States)

    Riyajan, Sa-Ad; Sasithornsonti, Yodsathorn; Phinyocheep, Pranee

    2012-06-05

    The hydrophilicity of natural rubber (NR) was improved by grafting with modified cassava starch (ST) (NR-g-ST) by using potassium persulfate (K2S2O8) as a catalyst. The modified ST was added to NR latex in the presence of Terric16A16 as a non-ionic surfactant at 60 °C for 3 h and cast film on a glass plate to obtain NR-g-ST. The chemical structure of NR-g-ST was confirmed by FTIR. The swelling ratio of NR-g-ST was investigated in water and results showed that the swelling ratio of the modified NR decreased as function of ST. In addition, the tensile strength of the modified NR in the presence of modified ST at 50 phr was the highest value. Also, the thermal stability modified NR-g-ST was higher than of NR/ST blend confirmed by TGA. Finally, the NR-g-ST was used a polymer membrane for controlling urea fertilizer and it easily degraded in soil. This product with good controlled-release and water-retention could be especially useful in agricultural and horticultural applications.

  4. Autonomous healing materials based on epoxidized natural rubber and ethylene methacrylic acid ionomers

    Science.gov (United States)

    Arifur Rahman, Md; Penco, Maurizio; Peroni, Isabella; Ramorino, Giorgio; Janszen, Gerardus; Di Landro, Luca

    2012-03-01

    The development of autonomous healing material has an enormous scientific and technological interest. In this context, this research work deals with the investigation of autonomous healing behavior of epoxidized natural rubber (ENR) and its blends with ethylene methacrylic acid ionomers. The autonomous healing behavior of ENR and its blends containing two different ionomers [poly(ethylene-co-methacrylic acid sodium salt) (EMNa) and poly(ethylene-co-methacrylic acid zinc salt) (EMZn)] has been studied by ballistic puncture tests. Interestingly, EMNa/ENR blends exhibit complete healing just after the ballistic test but EMZn/ENR blends do not show full self-repairing. The healing efficiency has been evaluated by optical microscopy and a depressurized air-flow test. The healing mechanism has been investigated by characterizing thermal and mechanical properties of the blends. The chemical structure studied by FTIR and thermal analysis show that the ion content of ionomers and functionality of ENR has a significant influence on the self-healing behavior.

  5. Investigation of miscibility of p(3hydroxybutyrate-co-3hydroxyhexanoate) and epoxidized natural rubber blends

    Science.gov (United States)

    Akram, Faridah; Chan, Chin Han; Natarajan, Valliyappan David

    2015-08-01

    Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate [P(3HB-co-3HHx)] produced by C. necator PHB-4 harboring phaCcs from crude palm kernel oil with 21 mol% of 3-hydroxyhexanoate and epoxidized natural rubber with 25 mol% of epoxy content (ENR-25) were used to study the miscibility of the blends by attenuated total reflection-Fourier transform infrared (ATR-FTIR) and differential scanning calorimetry (DSC). The polymers used were purified and the blends were prepared by solution casting method. Nuclear magnetic resonance (NMR) spectra confirm the purity and molecular structures of P(3HB-co-3HHx) and ENR-25. FTIR spectra for different compositions of P(3HB-co-3HHx) and ENR-25 blends show absorbance change of the absorbance bands but with no significant shifting of the absorbance bands as the P(3HB-co-3HHx) content decreases, which shows that there is no intermolecular interaction between the parent polymer blends. On top of that, there are two Tgs present for the blends and both remain constant for different compositions which corresponds to the Tgs of the parent polymers. This indicates that the blends are immiscible.

  6. Preparation and characterization of potato starch nanocrystal reinforced natural rubber nanocomposites.

    Science.gov (United States)

    Rajisha, K R; Maria, H J; Pothan, L A; Ahmad, Zakiah; Thomas, S

    2014-06-01

    Potato starch nanocrystals were found to serve as an effective reinforcing agent for natural rubber (NR). Starch nanocrystals were obtained by the sulfuric acid hydrolysis of potato starch granules. After mixing the latex and the starch nanocrystals, the resulting aqueous suspension was cast into film by solvent evaporation method. The composite samples were successfully prepared by varying filler loadings, using a colloidal suspension of starch nanocrystals and NR latex. The morphology of the nanocomposite prepared was analyzed by field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). FESEM analysis revealed the size and shape of the crystal and their homogeneous dispersion in the composites. The crystallinity of the nanocomposites was studied using XRD analysis which indicated an overall increase in crystallinity with filler content. The mechanical properties of the nanocomposites such as stress-strain behavior, tensile strength, tensile modulus and elongation at break were measured according to ASTM standards. The tensile strength and modulus of the composites were found to improve tremendously with increasing nanocrystal content. This dramatic increase observed can be attributed to the formation of starch nanocrystal network. This network immobilizes the polymer chains leading to an increase in the modulus and other mechanical properties.

  7. Rheological properties of isotropic magnetorheological elastomers featuring an epoxidized natural rubber

    Science.gov (United States)

    Azhani Yunus, Nurul; Amri Mazlan, Saiful; Ubaidillah; Choi, Seung-Bok; Imaduddin, Fitrian; Aziz, Siti Aishah Abdul; Khairi, Muntaz Hana Ahmad

    2016-10-01

    This study presents principal field-dependent rheological properties of magnetorheological elastomers (MREs) in which an epoxidized natural rubber (ENR) is adopted as a matrix (in short, we call it ENR-based MREs). The isotropic ENR-based MRE samples are fabricated by mixing the ENR compound with carbonyl iron particles (CIPs) with different weight percentages. The morphological properties of the samples are firstly analysed using the microstructure assessment. The influences of the magnetic field on the viscoelastic properties of ENR-based MREs are then examined through the dynamic test under various excitation frequencies. The microstructure of MRE samples exhibits a homogeneous distribution of CIPs in the ENR matrix. The dramatic increment of storage modulus, loss modulus and loss tangent of the ENR-based MREs are also observed from the field-dependent rheological test. This directly demonstrates that the stiffness and damping properties of the samples can be adjusted by the magnetic field. It is also seen that the CIP content, exciting frequency and the magnetic field essentially influence the dynamic properties of the ENR-based MREs. The strong correlation between the magnetization and the magneto-induced storage modulus could be used as a useful guidance in synthesizing the ENR-based MREs for certain applications.

  8. Contact resistance of multi-walled carbon nanotube/natural rubber nanocomposites with metallic ball

    Science.gov (United States)

    Sugiura, Tomoyoshi; Fujishige, Masatsugu; Noguchi, Toru; Ueki, Hiroyuki; Niihara, Ken-ichi; Takeuchi, Kenji

    2016-12-01

    This paper reports on the contact resistance (Rc) between carbon filler/natural rubber (NR) nanocomposite and gold ball: three varieties of nanocomposites were prepared from carbon black (CB) and two kinds of multi-walled carbon nanotubes (MWCNTs) with different diameter. Rc of MWCNT/NR nanocomposite was remarkably less than that of CB/NR nanocomposites. The relationship between Rc of MWCNT/NR nanocomposites and applied load was expressed in the formula, Rc=C·P-n (P: load, C and n: constant): for the MWCNTs (diameters of 13 nm)/NR and MWCNTs (diameters of 67 nm)/ NR nanocomposites, they were expressed as Rc=1724·P-0.6 and Rc=344·P-0.37, respectively. The former (MWCNT, ϕ13 nm) showed higher Rc than the latter (MWCNT, ϕ67 nm) over whole region of applied load. The mechanical hardness of the former was higher (90 HsA) than that of the latter (82 HsA). Therefore, the smaller contact area between the nanocomposite and gold ball of the former resulted in higher Rc. The apparent specific contact resistivity was calculated from the observed values of Rc and contact area: 130 Ω mm2 and 127 Ω mm2 for the former (MWCNT, ϕ13 nm) and the latter (MWCNT, ϕ67 nm), respectively.

  9. Effect of Zeolite Treatment on the Blooming Behavior of Paraffin Wax in Natural Rubber Composites

    Directory of Open Access Journals (Sweden)

    Bryan B. Pajarito

    2016-06-01

    Full Text Available The blooming behavior of paraffin wax in natural rubber (NR composites was studied as function of zeolite treatment. Three types of zeolite treatment were treated as factors: acid activation using hydrochloric acid (HCl solution, ion exchange using tetradecyldimethyl amine (TDA chloride salt, and organic modification using glycerol monostearate (GMS. The zeolite was treated according to a 23 full factorial design of experiment. Attenuated total reflectance – Fourier transform infrared (ATR-FTIR spectroscopy was used to characterize the chemical structure of treated zeolite. Treated zeolite was applied as filler to NR composites deliberately compounded with high amount of paraff in wax. The amount of bloomed wax in surface of NR composite sheets was monitored with time at 50oC. Results show the bloom amount to be linear with the square root of time. NR composites reinforced with untreated, acid-activated, and ion-exchanged zeolite fillers indicate reduction in wax blooming as compared to unfilled NR. The bloom rate (slope and initial bloom (y-intercept were determined from the experimental plots. Analysis of variance (ANOVA shows the bloom rate to be signif icantly increased when zeolite fillers are treated with GMS. Meanwhile, initial bloom was significantly enhanced when zeolite fillers are treated with TDA chloride salt and GMS. The significant increase in bloom rate and initial bloom can be attributed to the softening of the NR matrix at high amounts of TDA chloride salt and GMS.

  10. Enhanced dispersion of multiwall carbon nanotubes in natural rubber latex nanocomposites by surfactants bearing phenyl groups.

    Science.gov (United States)

    Mohamed, Azmi; Anas, Argo Khoirul; Bakar, Suriani Abu; Ardyani, Tretya; Zin, Wan Manshol W; Ibrahim, Sofian; Sagisaka, Masanobu; Brown, Paul; Eastoe, Julian

    2015-10-01

    Here is presented a systematic study of the dispersibility of multiwall carbon nanotubes (MWCNTs) in natural rubber latex (NR-latex) assisted by a series of single-, double-, and triple-sulfosuccinate anionic surfactants containing phenyl ring moieties. Optical polarising microscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Raman spectroscopy have been performed to obtain the dispersion-level profiles of the MWCNTs in the nanocomposites. Interestingly, a triple-chain, phenyl-containing surfactant, namely sodium 1,5-dioxo-1,5-bis(3-phenylpropoxy)-3-((3-phenylpropoxy)carbonyl) pentane-2-sulfonate (TCPh), has a greater capacity the stabilisation of MWCNTs than a commercially available single-chain sodium dodecylbenzenesulfonate (SDBS) surfactant. TCPh provides significant enhancements in the electrical conductivity of nanocomposites, up to ∼10(-2) S cm(-1), as measured by a four-point probe instrument. These results have allowed compilation of a road map for the design of surfactant architectures capable of providing the homogeneous dispersion of MWCNTs required for the next generation of polymer-carbon-nanotube materials, specifically those used in aerospace technology. Copyright © 2015 Elsevier Inc. All rights reserved.

  11. Study on Kinetics of Natural Rubber Vulcanization by S/La(DiPDP)3

    Institute of Scientific and Technical Information of China (English)

    Lin Xinhua; Liu Qingting; Chen Zhaohui; Wang Dizhen

    2007-01-01

    Kinetics of natural rubber (NR) vulcanization by lanthanum O, O'-diisopropyldithiophosphate [La(DiPDP)3] was studied. La(DiPDP)3 had remarkable accelerating effect on the vulcanization of NR. The rate constant k6 of the reaction that turned polysulphidic cross-links into the modified main chain was higher than that of desulfuration reaction of polysulfidic cross-links (k3). The activation energies (Ea2, Ea3, and Ea6) of the formation, desulfuration, and decomposition of polysulfidic cross-links were 87.57, 102.34, and 95.01 kJ·mol-1, respectively. Activation energy (Ea5) of the reaction that turned the cross-link precursors into the modified main chain was 82.67 kJ·mol-1. It could be concluded that the proportion of polysulphidic cross-links was higher than mono- and di- sulphidic cross-links during induction and curing periods, mono- and di- sulphidic cross-links increased as curing temperature rose. In the temperature range of 140~160 ℃, the amounts of polysulphidic cross-links were similar. However, over 160 ℃, mono- and di- sulphidic cross-links increased rapidly. Moreover, cross-link density of the vulcanizates was determined from the equilibrium-swelling data. A chemical probe detected the concentration of polysulphidic cross-links of vulcanizates. The change trend of the results predicated from equation corresponded to that of the experimental results.

  12. Engineering characterisation of epoxidized natural rubber-modified hot-mix asphalt

    Science.gov (United States)

    Al-Mansob, Ramez A.; Ismail, Amiruddin; Yusoff, Nur Izzi Md.; Rahmat, Riza Atiq O. K.; Borhan, Muhamad Nazri; Albrka, Shaban Ismael; Azhari, Che Husna; Karim, Mohamed Rehan

    2017-01-01

    Road distress results in high maintenance costs. However, increased understandings of asphalt behaviour and properties coupled with technological developments have allowed paving technologists to examine the benefits of introducing additives and modifiers. As a result, polymers have become extremely popular as modifiers to improve the performance of the asphalt mix. This study investigates the performance characteristics of epoxidized natural rubber (ENR)-modified hot-mix asphalt. Tests were conducted using ENR–asphalt mixes prepared using the wet process. Mechanical testing on the ENR–asphalt mixes showed that the resilient modulus of the mixes was greatly affected by testing temperature and frequency. On the other hand, although rutting performance decreased at high temperatures because of the increased elasticity of the ENR–asphalt mixes, fatigue performance improved at intermediate temperatures as compared to the base mix. However, durability tests indicated that the ENR–asphalt mixes were slightly susceptible to the presence of moisture. In conclusion, the performance of asphalt pavement can be enhanced by incorporating ENR as a modifier to counter major road distress. PMID:28182724

  13. Investigation of miscibility of p(3hydroxybutyrate-co-3hydroxyhexanoate) and epoxidized natural rubber blends

    Energy Technology Data Exchange (ETDEWEB)

    Akram, Faridah; Chan, Chin Han; Natarajan, Valliyappan David [Faculty of Applied Sciences, Universiti Teknologi MARA, Shah Alam, 40450 Selangor Darul Ehsan (Malaysia)

    2015-08-28

    Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate [P(3HB-co-3HHx)] produced by C. necator PHB{sup −}4 harboring phaC{sub cs} from crude palm kernel oil with 21 mol% of 3-hydroxyhexanoate and epoxidized natural rubber with 25 mol% of epoxy content (ENR-25) were used to study the miscibility of the blends by attenuated total reflection-Fourier transform infrared (ATR-FTIR) and differential scanning calorimetry (DSC). The polymers used were purified and the blends were prepared by solution casting method. Nuclear magnetic resonance (NMR) spectra confirm the purity and molecular structures of P(3HB-co-3HHx) and ENR-25. FTIR spectra for different compositions of P(3HB-co-3HHx) and ENR-25 blends show absorbance change of the absorbance bands but with no significant shifting of the absorbance bands as the P(3HB-co-3HHx) content decreases, which shows that there is no intermolecular interaction between the parent polymer blends. On top of that, there are two T{sub g}s present for the blends and both remain constant for different compositions which corresponds to the T{sub g}s of the parent polymers. This indicates that the blends are immiscible.

  14. Migration of BTEX and phthalates from natural rubber latex balloons obtained from the Sri Lankan market.

    Science.gov (United States)

    Jayawardena, Imanda; Godakumbura, Pahan I; Prashantha, M A B

    2016-01-01

    The current study evaluates the migration of benzene, toluene, ethylbenzene, xylene (BTEX) and phthalates into artificial saliva from natural rubber latex (NRL) balloons available for sale in Sri Lanka. It was discovered that at least one BTEX compound migrated from almost all the brands. The migration of four phthalates; diethyl phthalate, dibutyl phthalate, di-isobutyl phthalate and butyl benzyl phthalate were also observed. Migratory levels of BTEX and phthalates in most of the balloon brands were above the permissible levels set by the European Union. Assessment of factors affecting the migratory levels indicated migration under active mouthing conditions and migration from the neck region of the balloons were significantly higher. The migratory levels were observed to decrease with storage time, and in certain brands the BTEX levels decreased below the permissible level. One-way ANOVA indicated no significant differences (p ≥ 0.05) in migratory levels of each individual compound within the same brand for both BTEX and phthalates. When compared among different brands, BTEX levels indicated significant differences (p ≤ 0.05), while phthalate levels were observed to not be significantly different (p ≥ 0.05). A significant difference was also observed (p ≤ 0.05) among the migratory levels of compounds under each test condition evaluated as factors affecting the migratory level. Furthermore, the solvent based colorants added to color the latex were found to be the source of BTEX and phthalates in the NRL balloons.

  15. Determination of zinc diethyldithiocarbamate released into artificial sweat from natural rubber latex vulcanizates by HPLC.

    Science.gov (United States)

    Abraham, Elizabeth K; Ramesh, P; Joseph, R

    2007-01-01

    A simple high-performance liquid chromatography method is adopted in order to quantitate the amount of zinc diethyldithiocarbamate (ZDEC) released into artificial sweat from natural rubber latex vulcanizates. The artificial sweat is extracted with dichloromethane, and the residue is recovered and re-dissolved in a known quantity of dichloromethane. ZDEC is quantitated as its copper complex by reacting with copper(II) sulphate. A reversed-phase C18 column and detection wavelength of 435 nm are used to measure the copper-dithiocarbamate complex. The procedure is repeated with cobalt(II) chloride, and the amount of ZDEC obtained by both the methods is compared. It is found that the recovery of ZDEC from the artificial sweat is high when copper(II) sulphate is used, indicating that the copper(II) sulphate is a better complexing agent than cobalt(II) chloride under the conditions used in the present study. The limits of detection and the quantitation of ZDEC are found to be 0.25 and 0.86 microg/mL, respectively. The present method, based on precolumn derivatization using copper(II) sulphate, facilitates the quantitation of ZDEC in latex products.

  16. Epoxy Resins Toughened with Surface Modified Epoxidized Natural Rubber Fibers by One-Step Electrospinning.

    Science.gov (United States)

    Kim, Joo Ran; Kim, Jung J

    2017-04-27

    Epoxidized natural rubber fibers (ERFs) are developed through one-step electrospinning and directly deposited into epoxy resins without collecting and distributing of fibers. The shape of ERFs shows rough surface due to different evaporation rate of solvent mixture consisting of chloroform and dichloromethane and the average diameter of ERFs is 6.2 µm. The increase of ERFs loading from 0 to 20 wt % into the epoxy resin increases the fracture strain significantly from 1.2% to 13% and toughness from 0.3 MPa to 1.9 MPa by a factor of 7. However, the tensile strength and Young's modulus decrease about 34% from 58 MPa to 34 MPa and from 1.4 GPa to 0.9 GPa, respectively. Due to the crosslinking reactions between oxirane groups of ERFs and amine groups in the resin, surface roughness and the high aspect ratio of ERFs, ERFs result in more effective toughening effect with the minimum loss of tensile properties in epoxy resins.

  17. The Role of Ammonia in Synthesis of Silver Nanoparticles in Skim Natural Rubber Latex

    Directory of Open Access Journals (Sweden)

    Panu Danwanichakul

    2016-01-01

    Full Text Available Silver nanoparticles (AgNPs were synthesized in skim natural rubber latex, the by-product from concentrated latex production. The role of ammonia was investigated by varying the concentration to be 0.217, 0.362, 0.377, 0.392, and 0.406 wt%. The emergence of AgNPs was detected by UV-visible spectrophotometer and electrical conductivity meter. Upon increasing ammonia concentration, the ABS peak increased to a maximum and slightly shifted to a higher wavelength and then it decreased afterward and slightly shifted to a lower wavelength. The shift of the ABS peak was consistent with the conductivity result. The kinetic model was proposed to explain the competition between the reducing effect and size-controlling effect of ammonia. The reducing effect seemed to dominate in the low range of concentration while the size-controlling effect via the formation of AgNH32+ complex ion was important in the higher range. The TEM figures evidently confirmed the effects.

  18. Evaluation of permanent deformation and durability of epoxidized natural rubber modified asphalt mix

    Science.gov (United States)

    Al-Mansob, Ramez A.; Ismail, Amiruddin; Rahmat, Riza Atiq O. K.; Nazri Borhan, Muhamad; Alsharef, Jamal M. A.; Albrka, Shaban Ismael; Rehan Karim, Mohamed

    2017-09-01

    The road distresses have caused too much in maintenance cost. However, better understandings of the behaviours and properties of asphalt, couples with greater development in technology, have allowed paving technologists to examine the benefits of introducing additives and modifiers. As a result, modifiers such as polymers are the most popular modifiers used to improve the performance of asphalt mix. This study was conducted to investigate the use of epoxidized natural rubber (ENR) to be mixed with asphalt mix. Tests were conducted to investigate the performance characteristics of ENR-asphalt mixes, where the mixes were prepared according to the wet process. Mechanical testing on the ENR-asphalt mixes have demonstrated that the asphalt mix permanent deformation performance at high temperature was found to be improved compared to the base mixes. However, the durability studies have indicated that ENR-asphalt mixes are slightly susceptible with the presence of moisture. The durability of the ENR-asphalt mixes were found to be enhanced in term of permanent deformation at high and intermediate temperatures compared to the base asphalt mixes. As conclusion, asphalt pavement performance can be enhanced by using ENR as modifier to face the major road distresses.

  19. Reinforcement of Natural Rubber with Core-Shell Structure Silica-Poly(Methyl Methacrylate Nanoparticles

    Directory of Open Access Journals (Sweden)

    Qinghuang Wang

    2012-01-01

    Full Text Available A highly performing natural rubber/silica (NR/SiO2 nanocomposite with a SiO2 loading of 2 wt% was prepared by combining similar dissolve mutually theory with latex compounding techniques. Before polymerization, double bonds were introduced onto the surface of the SiO2 particles with the silane-coupling agent. The core-shell structure silica-poly(methyl methacrylate, SiO2-PMMA, nanoparticles were formed by grafting polymerization of MMA on the surface of the modified SiO2 particles via in situ emulsion, and then NR/SiO2 nanocomposite was prepared by blending SiO2-PMMA and PMMA-modified NR (NR-PMMA. The Fourier transform infrared spectroscopy results show that PMMA has been successfully introduced onto the surface of SiO2, which can be well dispersed in NR matrix and present good interfacial adhesion with NR phase. Compared with those of pure NR, the thermal resistance and tensile properties of NR/SiO2 nanocomposite are significantly improved.

  20. Structural changes in the low-density polyethylene/natural rubber composites in the aqueous and soil media

    Science.gov (United States)

    Mastalygina, Elena E.; Varyan, Ivetta A.; Kolesnikova, Natalya N.; Popov, Anatoly A.

    2016-05-01

    The novel biodegradable materials based on polyethylene with different content of natural rubber have been developed. In this paper the regularities of changes in structure and properties of the composites under the influence of biological and non-biological factors have been investigated. High levels of biodegradability and satisfied mechanical properties of biocomposites, as well as the significant modification of the polyethylene crystalline phase in the composites affected by moisture and environmental factors have been determined.

  1. Effects of rubber shock absorber on the flywheel micro vibration in the satellite imaging system

    Science.gov (United States)

    Deng, Changcheng; Mu, Deqiang; Jia, Xuezhi; Li, Zongxuan

    2016-12-01

    When a satellite is in orbit, its flywheel will generate micro vibration and affect the imaging quality of the camera. In order to reduce this effect, a rubber shock absorber is used, and a numerical model and an experimental setup are developed to investigate its effect on the micro vibration in the study. An integrated model is developed for the system, and a ray tracing method is used in the modeling. The spot coordinates and displacements of the image plane are obtained, and the modulate transfer function (MTF) of the system is calculated. A satellite including a rubber shock absorber is designed, and the experiments are carried out. Both simulation and experiments results show that the MTF increases almost 10 %, suggesting the rubber shock absorber is useful to decrease the flywheel vibration.

  2. Radiation vulcanization of natural rubber latex (part 6). Improvement of aging propreties of latex lubber vulcanized with radiation

    Energy Technology Data Exchange (ETDEWEB)

    Makuuchi, Keizo; Tsushima, Kyogo

    1988-10-15

    Concerning the vulcanization of natural rubber latex with radiation by using acrylic ester as accelerator, causes for loss of anti-aging property by leaching and counter-measure against it were reported. For the experiment, 2-ethyl hexyl acrylate with carbon tetra-chloride as accelerator, 2% aqueous solution of ammonia or acetic acid as leaching water, were used. For the analysis of extracts, ultra-violet absorption and gas chromatography were applied. As the result of the experiment, it was recognized that anti-aging property was more decreased by more increased quantity of extracted protein which was naturally contained in the natural rubber latex and functioned as anti-aging material, and that by radiation vulcanization, non-rubber components were destroyed to result the increased quantity of extracts compared with that of non-vulcanized. Concerning the improvement of anti-aging property, experimental comparison of miscellaneous methods resulted that the addition of sodium di-n-buthyl di-thiocarbamate was most effective. 3 references, 3 figures, 5 tables.

  3. Development of downflow hanging sponge (DHS) reactor as post treatment of existing combined anaerobic tank treating natural rubber processing wastewater.

    Science.gov (United States)

    Watari, Takahiro; Cuong Mai, Trung; Tanikawa, Daisuke; Hirakata, Yuga; Hatamoto, Masashi; Syutsubo, Kazuaki; Fukuda, Masao; Nguyen, Ngoc Bich; Yamaguchi, Takashi

    2017-01-01

    Conventional aerated tank technology is widely applied for post treatment of natural rubber processing wastewater in Southeast Asia; however, a long hydraulic retention time (HRT) is required and the effluent standards are exceeded. In this study, a downflow hanging sponge (DHS) reactor was installed as post treatment of anaerobic tank effluent in a natural rubber factory in South Vietnam and the process performance was evaluated. The DHS reactor demonstrated removal efficiencies of 64.2 ± 7.5% and 55.3 ± 19.2% for total chemical oxygen demand (COD) and total nitrogen, respectively, with an organic loading rate of 0.97 ± 0.03 kg-COD m(-3) day(-1) and a nitrogen loading rate of 0.57 ± 0.21 kg-N m(-3) day(-1). 16S rRNA gene sequencing analysis of the sludge retained in the DHS also corresponded to the result of reactor performance, and both nitrifying and denitrifying bacteria were detected in the sponge carrier. In addition, anammox bacteria was found in the retained sludge. The DHS reactor reduced the HRT of 30 days to 4.8 h compared with the existing algal tank. This result indicates that the DHS reactor could be an appropriate post treatment for the existing anaerobic tank for natural rubber processing wastewater treatment.

  4. Supply Security of Natural Rubber Industry%天然橡胶产业供给安全研究

    Institute of Scientific and Technical Information of China (English)

    江军; 方佳

    2011-01-01

    以环境要求相类似的橡胶、木薯、甘蔗、油棕为例,在探讨以上作物环境适应性和产量变化的基础上,对世界各主要产胶国的种植选择做出总结,提出中国天然橡胶产业供给安全对策,包括从政策上加大对小胶园的改造管理与扶持力度,进一步加大力度实施天然橡胶良种补贴,对天然橡胶实行指导价收购政策,建立胶农合作社,加强天然橡胶种植区域的基础设施建设等。%A case study about tropical energy crops with similar environment adaptability to natural rubber,like cassava,sugar cane and oil palm.Based on environment adaptability and production history research,then made summaries towards cultivation choice for the main natural rubber production countries world,and finally supply security policies of natural rubber industry in China were put forward,include support to small farm from policy level,allowance to improved variety,purchasing at threshold price,establishment of farmers co-op and construction of infrastructure.

  5. Permeation study of indomethacin from polycarbazole/natural rubber blend film for electric field controlled transdermal delivery.

    Science.gov (United States)

    Thorngkham, Pornwalai; Paradee, Nophawan; Niamlang, Sumonman; Sirivat, Anuvat

    2015-05-01

    Transdermal drug delivery is an alternative route to transport the drug into the blood system. This method has been continuously developed to overcome limitations and is now suitable for a wide variety of drug molecules. In this work, the influences of electric field and conductive polymer were investigated for developing a unique drug delivery system from double-centrifuged natural rubber (DCNR) matrix. Indomethacin (IN) was loaded into polycarbazole (PCz) as a conductive polymer drug host to promote the efficient transportation of the drug. The IN-loaded PCz was blended with DCNR to form a transdermal patch. The permeation of IN through the PCz/NR film and pig skin was carrried out by a modified Franz diffusion cell. The IN diffused from DCNR film by the diffusion controlled combined with erosion mechanism depending on the pore formation period. The drug permeation increased with decreasing cross-link ratio because of more accessible pathways for the drug permeation. Moreover, an electric field and the inclusion of PCz as the drug carrier dramatically improved the diffusion of the drug from the membrane by through the electrorepulsive force and electro-reduced PCz expansion. Thus, the PCz/DCNR films are shown here as a potential transdermal patch under applied electric field.

  6. Metathesis transformations of natural products: cross-metathesis of natural rubber and mandarin oil by Ru-alkylidene catalysts.

    Science.gov (United States)

    Martínez, Araceli; Gutiérrez, Selena; Tlenkopatchev, Mikhail A

    2012-05-18

    This study reports on the degradation of natural rubber (NR) via crossmetathesis with mandarin oil and d-limonene, an abundant compound in essential oils; that were used as chain transfer agents (CTAs) and green solvents. Reactions were performed in the presence of the ruthenium-alkylidene catalysts (PCy₃)₂(Cl)₂Ru=CHPh (I) and (1,3-dimesityl-4,5-dihydroimidazol-2-ylidene) (PCy₃)Cl₂Ru=CHPh (II), respectively. Catalyst II bears an N-heterocyclic carbene ligand (NHC) bounded to the ruthenium atom, which has a strong basic character; therefore it is more active toward trisubstituted olefins in comparison with catalyst I. In both cases, isolated monoterpene-terminated isoprene oligomers were obtained as products of the cross-metathesis degradation of NR. In the presence of catalyst II molecular weight values around M(n) × 10² and yields of 80% were obtained; whereas with catalyst I, the molecular weights of products were about M(n) × 10⁴ with yields ranging 70 to 74%. The composition and yield of NR degradation products were determined by GC/MS (EI) analysis and it was found that the oligomers obtained have primarily one vinyl group and one terpene-monocyclic group at the chain end, with isoprene units A(m) = 2, 3 y 4.

  7. Below-ground interspecific competition for water in a rubber agroforestry system may enhance water utilization in plants.

    Science.gov (United States)

    Wu, Junen; Liu, Wenjie; Chen, Chunfeng

    2016-01-19

    Rubber-based (Hevea brasiliensis) agroforestry systems are regarded as the best way to improve the sustainability of rubber monocultures, but few reports have examined water use in such systems. Accordingly, we tested whether interplanting facilitates water utilization of rubber trees using stable isotope (δD, δ(18)O, and δ(13)C) methods and by measuring soil water content (SWC), shoot potential, and leaf C and N concentrations in a Hevea-Flemingia agroforestry system in Xishuangbanna, southwestern China. We detected a big difference in the utilization of different soil layer water between both species in this agroforestry system, as evidenced by the opposite seasonal fluctuations in both δD and δ(18)O in stem water. However, similar predawn shoot potential of rubber trees at both sites demonstrating that the interplanted species did not affect the water requirements of rubber trees greatly. Rubber trees with higher δ(13)C and more stable physiological indexes in this agroforestry system showed higher water use efficiency (WUE) and tolerance ability, and the SWC results suggested this agroforestry is conductive to water conservation. Our results clearly indicated that intercropping legume plants with rubber trees can benefit rubber trees own higher N supply, increase their WUE and better utilize soil water of each soil layer.

  8. A Comparison of Three Rubber Dam Systems in Vivo: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Martin Kapitán

    2015-07-01

    Full Text Available The aim of this study was to compare the isolation systems OptraDam® Plus and OptiDam™ with the conventional rubber dam in terms of objective and subjective parameters. The isolation systems were applied during the dental treatment of the patients. The time of preparation, placement, presence and removal were measured and the quality of isolation was evaluated. The median time of rubber dam placement was 76 s (Q1 = 62 s; Q3 = 111.25 s. The application time of OptraDam® Plus was significantly longer compared to the other systems (P < 0.001. The median volume of fluid remaining in the isolated space after 5 minutes was 4.9 mL (Q1 = 4 mL; Q3 = 5 mL. The differences between the systems with regards to isolation quality were not statistically significant. The majority of the patients reported a higher level of comfort during the treatment with a rubber dam than without it. The attitude of patients was not affected by any of the observed factors. The ranking of the isolation systems according to the subjective evaluation by the patients was (from best to worst OptiDam™, conventional rubber dam, OptraDam® plus. The results presented in this study could guide clinicians for choosing the most appropriate isolation system.

  9. Biolubricant induced phase inversion and superhydrophobicity in rubber-toughened biopolymer/organoclay nanocomposites

    Science.gov (United States)

    Bayer, Ilker S.; Steele, Adam; Martorana, Philip; Loth, Eric; Robinson, Scott J.; Stevenson, Darren

    2009-08-01

    We present a simple technique to fabricate rubber-toughened biopolymer/organoclay nanocomposite coatings with highly water repellent surface wetting characteristics and strong adhesion to metal surfaces. The technique combines the principles of phase inversion and atomization of multicomponent polymer/organoclay suspensions containing a biolubricant as the nonsolvent. The biolubricant was a blend of cyclomethicone/dimethiconol oil with fruit kernel oils. The ternary system of cellulose nitrate/solvent/biolubricant was blended with rubber dispersed organoclay nanofluids. Natural, synthetic, and fluoroacrylic latex rubbers were used for the purpose. Self-cleaning superhydrophobic coatings were obtained from synthetic and fluoroacrylic rubbers whereas natural rubber containing formulations resulted in sticky superhydrophobic coatings.

  10. Thermomyces lanuginosus STm: a source of thermostable hydrolytic enzymes for novel application in extraction of high-quality natural rubber from Taraxacum kok-saghyz (rubber dandelion)

    Science.gov (United States)

    Hydrolytic enzymes from a newly isolated strain of the thermophilic fungus Thermomyces lanuginosus were used to extract rubber from Taraxacum kok-saghyz commonly known as rubber (or Russian or Kazak(h)) dandelion. The fungus was isolated from garden soil and identified as Thermomyces lanuginosus STm...

  11. Swelling behaviour in n-pentane and mechanical properties of epoxidized natural rubber with different epoxide content

    Science.gov (United States)

    Kinasih, N. A.; Fathurrohman, M. I.; Winarto, D. A.

    2017-07-01

    Epoxidized natural rubber (ENR) with different level of epoxidation (i.e. 10, 20, 30, 40 and 50 mol% indicated as ENR ENR10, ENR20, ENR30, ENR40 and ENR50, respectively) were prepared. They were then vulcanized by using efficient system vulcanization. The effect of epoxide content on curing characteristic, swelling and mechanical properties in N-pentane was investigated. The Attenuated Resonance Fourier Transform Infrared (ATR-FTIR) and H-Nuclear Magnetic Resonance (H-NMR) were used to determine the epoxidation level. Glass transition (Tg) of ENR samples was determined by using Direct Scanning Calorimetry (DSC). The result revealed that the resistance of ENR in N-pentane increased with increasing epoxidation level, which indicated by decreasing equilibrium mol uptake and diffusion coefficient. The compression set of ENR and aging resistance increased with increasing epoxide content, except ENR50 was due to ENR 50 have two Tg value. However, the value of hardness and tensile strength were not effected by epoxidation level.

  12. Performance evaluation of shape memory alloy/rubber-based isolation systems for seismic response mitigation of bridges

    Science.gov (United States)

    Ozbulut, Osman E.; Hurlebaus, Stefan

    2010-04-01

    Base isolation is an effective method of reducing seismic response of bridges during an earthquake. Rubber isolators are one of the most common types of base isolation systems. As an alternative to conventional rubber isolators such as high damping rubber bearing and lead rubber bearing, smart rubber bearing systems with shape memory alloys (SMAs) have been proposed in recent years. As a class of smart materials, shape memory alloys shows excellent re-centering and considerable damping capabilities which can be exploited to obtain an efficient seismic isolation system. This paper explores effectiveness of shape memory alloy/rubber-based isolation systems for protecting bridges against seismic loads by performing a sensitivity analysis. The isolation system considered in this study consists of a laminated rubber bearing which provides lateral flexibility while supplying high vertical load-carrying capacity and an auxiliary device made of multiple loops SMA wires. The SMA device offers additional energy dissipating and re-centering capability. A threespan continuous bridge is modeled with SMA/rubber-based isolation system. Numerical simulations of the bridge are conducted for various historical ground motions that are spectrally matched to a target design spectrum. The normalized yield strength, yield displacement and pre-stress level of the SMA device and ambient temperature are selected as parameters of the sensitivity study. The variation of seismic response of the bridge with considered parameters is assessed. The optimum values of the normalized yield strength and the yield displacement of the SMA device is found to be in the range of 0.20-0.25 and 40-50 mm, respectively. Also, the SMA/rubber-based isolation system is observed to be more effective when the SMA device is pre-stressed. In addition, it is found that ambient temperature considerably affects the performance of the bridge isolated by SMA/rubber-based isolators.

  13. Evaluation of sodium diclofenac release using natural rubber latex as carrier

    Energy Technology Data Exchange (ETDEWEB)

    Aielo, Patricia B.; Borges, Felipe A.; Romeira, Karoline M.; Herculano, Rondinelli D., E-mail: rond@assis.unesp.br [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Assis, SP (Brazil). Fac. de Ciencias e Letras. Dept. de Ciencias Biologicas; Miranda, Matheus Carlos Romeiro [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Araraquara, SP (Brazil). Inst. de Quimica; Arruda, Larisa B. de; Lisboa Filho, Paulo Noronha; Drago, Bruno de C. [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Bauru, SP (Brazil). Fac. de Ciencias. Dept. de Fisica

    2014-08-15

    Sodium Diclofenac is a non-steroidal anti-inflammatory drug (NSAID) taken to reduce inflammation and, as an analgesic, reduce pain. Although this drug is widely used in the general population, properties such as the short half-time and some side effects restrict its clinical use. The most common side effects are: gastric irritation, gastritis, peptic ulcer and bleeding. Studies involving biomaterials as carrier for drug release have been proving their efficiency in overcoming those problems and better controlling the release rate and targeting of the drug. Natural rubber latex (NRL) has been proven excellent for its biocompatibility and ability to stimulate angiogenesis, cellular adhesion and the formation of extracellular matrix, promoting the replacement and regeneration of tissue. In this work, a NRL membrane is used to deliver sodium diclofenac. Sodium diclofenac (NaDic) was found to be adsorbed on the NRL membrane, with little or no incorporation into the membrane bulk, according to energy dispersive Scanning Electron Microscopy with X-Ray microanalysis (SEM-EDS) spectroscopy. In addition, FT-IR shows that there is no molecular-level interaction between drug and NRL. Already, the X-Ray Diffraction (XRD) of NaDic-NRL shows a broader one spectrum than the sharper halo (amorphous characteristic XRD spectrum) of pure NRL. More importantly, the release time of diclofenac in a NRL membrane in vitro was increased from the typical 2-3 h for oral tablets to ca. 74 h. The kinetics of the drug release could be fitted with a double exponential function, with two characteristic times of 0.899 and 32.102 h. In this study, we demonstrated that the interesting properties provided by NRL membranes combined with a controlled release of drug is relevant for biomedical applications.(author)

  14. Novel mesoporous composites based on natural rubber and hexagonal mesoporous silica: Synthesis and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Nuntang, Sakdinun; Poompradub, Sirilux [Fuels Research Center, Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Patumwan, Bangkok 10330 (Thailand); Butnark, Suchada [PTT Research and Technology Institute, PTT Public Company Limited, Wangnoi, Ayutthaya 13170 (Thailand); Yokoi, Toshiyuki; Tatsumi, Takashi [Division of Catalytic Chemistry, Chemical Resources Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Ngamcharussrivichai, Chawalit, E-mail: Chawalit.Ng@Chula.ac.th [Fuels Research Center, Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Patumwan, Bangkok 10330 (Thailand); Center of Excellence on Petrochemical and Materials Technology (PETROMAT), Chulalongkorn University, Patumwan, Bangkok 10330 (Thailand)

    2014-02-14

    The present study is the first report on the synthesis and characterization of mesoporous composites based on natural rubber (NR) and hexagonal mesoporous silica (HMS). A series of NR/HMS composites were prepared in tetrahydrofuran via an in situ sol–gel process using tetraethylorthosilicate as the silica precursor. The physicochemical properties of the composites were characterized by various techniques. The effects of the gel composition on the structural and textural properties of the NR/HMS composites were investigated. The Fourier-transform infrared spectroscopy (FTIR) and {sup 29}Si magic angle spinning nuclear magnetic resonance ({sup 29}Si MAS NMR) results revealed that the surface silanol groups of NR/HMS composites were covered with NR molecules. The powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) data indicated an expansion of the hexagonal unit cell and channel wall thickness due to the incorporation of NR molecules into the mesoporous structure. NR/HMS composites also possessed nanosized particles (∼79.4 nm) as confirmed by scanning electron microscopy (SEM) and particle size distribution analysis. From N{sub 2} adsorption–desorption measurement, the NR/HMS composites possessed a high BET surface area, large pore volume and narrow pore size distribution. Further, they were enhanced hydrophobicity confirmed by H{sub 2}O adsorption–desorption measurement. In addition, the mechanistic pathway of the NR/HMS composite formation was proposed. - Highlights: • NR molecules were incorporated into hexagonal meso-structure of HMS. • NR/HMS composites exhibited an expanded unit cell and channel wall thickness. • Nanosized NR/HMS composites with a lower particle size range were obtained. • NR/HMS had high surface area, large pore volume and narrow pore size distribution. • NR/HMS composites displayed an enhanced hydrophobicity.

  15. Evaluation of mechanical properties of laminated rubber bearings as three-dimensional base isolation device for Fast Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Yabana, Shuichi; Matsuda, Akihiro [Central Research Inst. of Electric Power Industry, Abiko, Chiba (Japan). Abiko Research Lab

    1999-10-01

    Rubber bearings with thick rubber layers to be used for 3-dimensional base isolation system are developed. Design parameters of the rubber bearings are determined to effectively reduce both horizontal and vertical seismic loads especially for equipment in the system; horizontal natural period and vertical natural frequency of the system supported by the rubber bearings are 3 sec. and 3 Hz, respectively. Furthermore, primary and secondary shape factors and design vertical stress of the rubber bearings are determined to give stable mechanical properties. Using scale models of the rubber bearings, static, dynamic and failure tests were carried out to evaluate the mechanical characteristics and the performance of the rubber bearings. From these tests, it is shown that the developed rubber bearings are efficient as 3-dimensional base isolation device. (author)

  16. Growth assessment of popular clones of natural rubber (Hevea brasiliensis under warm dry climatic conditions of Chattisgarh state, Central India

    Directory of Open Access Journals (Sweden)

    Krishan B

    2015-04-01

    Full Text Available Two natural rubber (Hevea brasiliensis most popular and widely planted clones RRIM 600 and RRII 105 in the traditional region of India, were evaluated for immature growth performance in warm dry climate of Bastar region in chattisgarh state. The state is a non-tradional rubber growing region and the crop experiences severe drought in the summer months. Prolonged high temperature, low rainfall and soil moisture are the major environmental constraints affecting the performance of clones in the region. Growth performance, effect of seasonal changes on the growth in terms of girth and morphological characters of the clones was assessed. Both the clones observed satisfactory growth in the region. RRIM 600 showed over all superiority and better adaptability in the region. The mean annual girth increment of clones was 6.2 cm. highest girth contribution for both clones was recorded in the wet season, while the lowest was observed during the summer. RRIM 600 also showed more vigorous morphological growth in terms of stem height and canopy structure. Clones attain a tappable girth after the nine years of field planting in the region. Various growth parameter, overall clones performance and adaptability in the region has been discussed. The present study may provide information on the feasibility of rubber cultivation and performance of clones under adverse climate with further support in the identification of suitable best clones for such nontraditional regions.

  17. Effects of partial replacement of rattan powder by commercial fillers on the properties of natural rubber composites

    Directory of Open Access Journals (Sweden)

    Nadras Othman

    2012-11-01

    Full Text Available The effects of partial replacement of rattan powder (RP by carbon black (CB, mica, and calcium carbonate (CaCO3 on the curing characteristics, tensile properties, rubber-filler interaction, and morphological studies of natural rubber (NR composites were investigated. Rattan powder with an average particle size of less than 180 µm was used in this study. NR/RP/CB, NR/RP/mica, and NR/RP/CaCO3 composites with five different RP/commercial fillers loadings (i.e. 30/0, 20/10, 15/15, 10/20, 0/30 phr were prepared using a laboratory size two-roll mill. Results showed that the maximum torque (MH of the NR/RP/CB, NR/RP/mica, and NR/RP/CaCO3 composites increased with increasing the commercial filler-loading ratio. The scorch time (ts2 and cure time (t90 of NR/RP/CB composites decreased as the ratio of CB loading was increased, whereas, ts2 and t90 of NR/RP/mica and NR/RP/CaCO3 composites increased as mica and CaCO3 loading ratio were raised, respectively. The tensile strength, elongation at break (Eb, stress at 100% elongation (M100, and stress at 300% elongation (M300 of all the composites increased as the commercial filler-loading ratio increased. This is due to the presence of the commercial filler, which brought a better rubber-filler interaction, as confirmed by the rubber-filler interaction and scanning electron microscopy (SEM studies.

  18. Effect of electron beam irradiation on the properties of natural rubber (NR)/styrene-butadiene rubber (SBR) blend

    Energy Technology Data Exchange (ETDEWEB)

    Manshaie, R. [Department of Chemical Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Nouri Khorasani, S., E-mail: saied@cc.iut.ac.i [Department of Chemical Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Jahanbani Veshare, S. [Department of Chemical Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Rezaei Abadchi, M. [Department of Polymer Engineering, Amirkabir University of Technology, Tehran (Iran, Islamic Republic of)

    2011-01-15

    In this study, physico-mechanical properties of NR/SBR blends cured by electron beam irradiation and sulfur were compared. The NR/SBR blends were prepared using a two-roll mill. Electron beam irradiations of 100-400 kGy were applied to cure the blends and changes in physico-mechanical properties were studied as a function of irradiation. Also, oil resistance and the effect of thermal ageing on mechanical properties of the blends were investigated. The results show that the irradiated blends have better mechanical properties than those cured by sulfur system. The irradiation cured samples also exhibited better heat stability than the sulfur cured samples. The blend cured by the highest dose shows the lowest swelling and high oil resistance compared with the other samples cured by irradiation.

  19. Effect of electron beam irradiation on the properties of natural rubber (NR)/styrene-butadiene rubber (SBR) blend

    Science.gov (United States)

    Manshaie, R.; Nouri Khorasani, S.; Jahanbani Veshare, S.; Rezaei Abadchi, M.

    2011-01-01

    In this study, physico-mechanical properties of NR/SBR blends cured by electron beam irradiation and sulfur were compared. The NR/SBR blends were prepared using a two-roll mill. Electron beam irradiations of 100-400 kGy were applied to cure the blends and changes in physico-mechanical properties were studied as a function of irradiation. Also, oil resistance and the effect of thermal ageing on mechanical properties of the blends were investigated. The results show that the irradiated blends have better mechanical properties than those cured by sulfur system. The irradiation cured samples also exhibited better heat stability than the sulfur cured samples. The blend cured by the highest dose shows the lowest swelling and high oil resistance compared with the other samples cured by irradiation.

  20. Reinforcement of Natural Rubber by Precipitated Silica: the Influence of Processing Temperature

    NARCIS (Netherlands)

    Sarkawi, S.S.; Dierkes, W.K.; Noordermeer, J.W.M.

    2014-01-01

    The thermal history, and in particular the mixing dump temperature, is a parameter of paramount importance in mixing rubber and silica with a silane coupling agent in order to achieve proper silanization of silica and to avoid premature scorch reactions. The influence of the mixing dump temperature

  1. Reinforcement of natural rubber by precipitated silica: the influence of processing temperature

    NARCIS (Netherlands)

    Sarkawi, S.S.; Dierkes, W.K.; Noordermeer, J.W.M.

    2012-01-01

    The thermal history and in particular the mixing dump temperature is a parameter of paramount importance in mixing rubber and silica with a silane coupling agent in order to achieve proper silanization of silica and to avoid premature scorch reactions. In this work, the influence of mixing dump temp

  2. Implications of non-carcinogenic pah-free extender oils in natural rubber based tire compounds

    NARCIS (Netherlands)

    Petchkaew, A.

    2015-01-01

    The oils are generally added in the rubber compounds to improve processing properties, low temperature properties, dispersion of fillers, and to reduce cost. The conventionally widely used oils in tire compounds are Distillate Aromatic Extract (DAE) oils, which contain a high concentration of Polycy

  3. RELIABILITY-BASED DESIGN AND ANALYSIS ON HYDRAULIC SYSTEM FOR SYNTHETIC RUBBER PRESS

    Institute of Scientific and Technical Information of China (English)

    Yao Chengyu; Zhao Jingyi

    2005-01-01

    To overcome the design limitations of traditional hydraulic control system for synthetic rubber press and such faults as high fault rate, low reliability, high energy-consuming and which always led to shutting down of post-treatment product line for synthetic rubber, brand-new hydraulic system combining with PC control and two-way cartridge valves for the press is developed, whose reliability is analyzed, reliability model of the hydraulic system for the press is established by analyzing processing steps, and reliability simulation of each step and the whole system is carried out by software MATLAB, which is verified through reliability test. The fixed time test has proved not that theory analysis is sound, but the system has characteristics of reasonable design and high reliability,and can lower the required power supply and operational energy cost.

  4. Prevalence of Allergy to Natural Rubber Latex and Potential Cross Reacting Food in Operation Room Staff in Shiraz Hospitals -2006

    Directory of Open Access Journals (Sweden)

    H Nabavizade

    2007-07-01

    Full Text Available Introduction & Objective: Allergic reactions to natural rubber latex have increased during past 10 years especially among health care workers and patients with high exposure to latex allergens. Allergic reaction to latex is related to many diseases like occupational asthma. This study was performed to determine the prevalence of allergy to natural rubber latex and potential cross reacting food in operation room staff in Shiraz hospitals. Materials & Methods: In this cross-sectional descriptive study five hundred eighty operation room staff of ten private and state hospitals in Shiraz completed latex allergy questionnaire. They were questioned about personal history and previous history of latex sensitivity, symptoms of latex reactivity and about other allergies particularly to foods that may cross react with latex. Informed consent was obtained and skin prick testing was performed with natural rubber latex. Skin prick tests were done with three potentially cross reacting food (banana, Kiwi, and potato. The obtained data were analyzed with SPSS software and Chi-square test. Results: Among the 580 operation room workers 104 (17.9 % of participants were positive to latex skin test. We found a significant association between positive skin test to latex in operation room staff and atopy, urticaria and food allergy. Positive skin test to latex related to positive kiwi skin test (p<0.05. The prevalence did not vary by sex, age, education, surgical and non surgical glove users, history of contact dermatitis or smoking status. Conclusion: Latex allergy has a high prevalence in personnel of operation room. Evaluation of present symptom and prediction of future disease necessitate screening test in individuals at risk.

  5. Organosulfonic acid-functionalized mesoporous composites based on natural rubber and hexagonal mesoporous silica

    Energy Technology Data Exchange (ETDEWEB)

    Nuntang, Sakdinun; Poompradub, Sirilux [Fuels Research Center, Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Patumwan, Bangkok 10330 (Thailand); Butnark, Suchada [PTT Research and Technology Institute, PTT Public Company Limited, Wangnoi, Ayutthaya 13170 (Thailand); Yokoi, Toshiyuki; Tatsumi, Takashi [Chemical Resources Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Ngamcharussrivichai, Chawalit, E-mail: Chawalit.Ng@Chula.ac.th [Fuels Research Center, Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Patumwan, Bangkok 10330 (Thailand); Center of Excellence on Petrochemical and Materials Technology (PETROMAT), Chulalongkorn University, Patumwan, Bangkok 10330 (Thailand)

    2014-10-15

    This study is the first report on synthesis, characterization and catalytic application of propylsulfonic acid-functionalized mesoporous composites based on natural rubber (NR) and hexagonal mesoporous silica (HMS). In comparison with propylsulfonic acid-functionalized HMS (HMS-SO{sub 3}H), a series of NR/HMS-SO{sub 3}H composites were prepared via an in situ sol–gel process using tetrahydrofuran as the synthesis media. Tetraethylorthosilicate as the silica source, was simultaneously condensed with 3-mercaptopropyltrimethoxysilane in a solution of NR followed by oxidation with hydrogen peroxide to achieve the mesoporous composites containing propylsulfonic acid groups. Fourier-transform infrared spectroscopy and {sup 29}Si MAS nuclear magnetic resonance spectroscopy results verified that the silica surfaces of the NR/HMS-SO{sub 3}H composites were functionalized with propylsulfonic acid groups and covered with NR molecules. After the incorporation of NR and organo-functional group into HMS, the hexagonal mesostructure remained intact concomitantly with an increased framework wall thickness and unit cell size, as evidenced by the X-ray powder diffraction analysis. Scanning electron microscopy analysis indicated a high interparticle porosity of NR/HMS-SO{sub 3}H composites. The textural properties of NR/HMS-SO{sub 3}H were affected by the amount of MPTMS loading to a smaller extent than that of HMS-SO{sub 3}H. NR/HMS-SO{sub 3}H exhibited higher hydrophobicity than HMS-SO{sub 3}H, as revealed by H{sub 2}O adsorption–desorption measurements. Moreover, the NR/HMS-SO{sub 3}H catalysts possessed a superior specific activity to HMS-SO{sub 3}H in the esterification of lauric acid with ethanol, resulting in a higher conversion level. - Highlights: • Acidic NR/HMS-SO{sub 3}H composites were prepared by in situ sol–gel process. • Propylsulfonic acid was functionalized onto HMS surface by direct co-condensation. • NR/HMS-SO{sub 3}H exhibited a hexagonal

  6. Shell structure of natural rubber particles: evidence of chemical stratification by electrokinetics and cryo-TEM.

    Science.gov (United States)

    Rochette, Christophe N; Crassous, Jérôme J; Drechsler, Markus; Gaboriaud, Fabien; Eloy, Marie; de Gaudemaris, Benoît; Duval, Jérôme F L

    2013-11-26

    The interfacial structure of natural rubber (NR) colloids is investigated by means of cryogenic transmission electron microscopy (cryo-TEM) and electrokinetics over a broad range of KNO3 electrolyte concentrations (4-300 mM) and pH values (1-8). The asymptotic plateau value reached by NR electrophoretic mobility (μ) in the thin double layer limit supports the presence of a soft (ion- and water-permeable) polyelectrolytic type of layer located at the periphery of the NR particles. This property is confirmed by the analysis of the electron density profile obtained from cryo-TEM that evidences a ∼2-4 nm thick corona surrounding the NR polyisoprene core. The dependence of μ on pH and salt concentration is further marked by a dramatic decrease of the point of zero electrophoretic mobility (PZM) from 3.6 to 0.8 with increasing electrolyte concentration in the range 4-300 mM. Using a recent theory for electrohydrodynamics of soft multilayered particles, this "anomalous" dependence of the PZM on electrolyte concentration is shown to be consistent with a radial organization of anionic and cationic groups across the peripheral NR structure. The NR electrokinetic response in the pH range 1-8 is indeed found to be equivalent to that of particles surrounded by a positively charged ∼3.5 nm thick layer (mean dissociation pK ∼ 4.2) supporting a thin and negatively charged outermost layer (0.6 nm in thickness, pK ∼ 0.7). Altogether, the strong dependence of the PZM on electrolyte concentration suggests that the electrostatic properties of the outer peripheral region of the NR shell are mediated by lipidic residues protruding from a shell containing a significant amount of protein-like charges. This proposed NR shell interfacial structure questions previously reported NR representations according to which the shell consists of either a fully mixed lipid-protein layer, or a layer of phospholipids residing exclusively beneath an outer proteic film.

  7. Allergen profiles of natural rubber latex (NRL) proteins on gloves and glove powders.

    Science.gov (United States)

    Tomazic-Jezic, Vesna J; Sanchez, B A

    2005-01-01

    The contributing role of glove powder in sensitization to natural rubber latex (NRL) proteins has been well documented in laboratory studies and through clinical evaluations. However, the quantitative relationship of the respiratory and topical exposures in the sensitization process remains unknown because the relative levels of protein on the glove powders in relation to the total levels of protein on NRL gloves have not been determined. In NRL allergens--Hev b 1, Hev b 3, Hev b 5, and Hev b 6.02--on randomly selected surgical and examination NRL gloves. We also examined the binding pattern of the four allergens to several glove powders that showed a different affinity to NRL proteins. The level of powder-bound protein was determined by the ELISA Inhibition Assay (ASTM D6499 standard method). Two cross-linked corn starch powders, one sample of cooking corn starch and one oat starch sample, were exposed to ammoniated (AL) or nonammoniated (NAL) raw NRL protein extracts. The levels of individual allergens were determined using the NRL allergen kit. In the NRL glove extracts we observed a wide range in the total allergen levels and a great diversity in the proportion of the four allergens. On the other hand, the evaluated starches had similar ratios of four individual allergens, regardless of the differences in their total allergen levels. The exposure of starches to NRL proteins with different allergen profiles did not affect the allergen ratio. All samples demonstrated a selective affinity for binding Hev b 1 and Hev b 5 allergens and a lesser affinity for the Hev b 6.02 allergen. Allergen Hev b 6.02 made up about 60% of the total allergen in the NAL extract, but only 12-30% of Hev b 6.02 was bound to starches. In contrast, there was only 3-7% of Hev b 1 allergen in the NAL extract, but powders had 35-45% of Hev b 1. These findings indicate that allergenic properties of NRL gloves and respective glove powders may be different.

  8. A structural study of epoxidized natural rubber (ENR-50) and its cyclic dithiocarbonate derivative using NMR spectroscopy techniques.

    Science.gov (United States)

    Hamzah, Rosniza; Bakar, Mohamad Abu; Khairuddean, Melati; Mohammed, Issam Ahmed; Adnan, Rohana

    2012-09-12

    A structural study of epoxidized natural rubber (ENR-50) and its cyclic dithiocarbonate derivative was carried out using NMR spectroscopy techniques. The overlapping (1)H-NMR signals of ENR-50 at δ 1.56, 1.68-1.70, 2.06, 2.15-2.17 ppm were successfully assigned. In this work, the C=S and quaternary carbon of cyclic dithiocarbonate. All other (1)H- and (13)C-NMR chemical shifts of the derivative remain unchanged with respect to the ENR-50.

  9. Evaluation of natural rubber from IAC series clones by solid state {sup 13}C NMR; Avaliacao da borracha natural de clones da serie IAC por {sup 13}C RMN no estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Maria A.; Moreno, Rogerio M.B.; Goncalves, Paulo S. [Instituto Agronomico de Campinas, SP (Brazil). Centro de Cafe e Plantas Tropicais. Programa Seringueira]. E-mails: paulog@iac.sp.gov.br; mariaalice@cnpdia.embrapa.br; Forato, Lucimara A.; Colnago, Luiz A.; Mattoso, Luiz H.C. [EMBRAPA Instrumentacao Agropecuaria, Sao Carlos, SP (Brazil)]. E-mail: colnago@cnpdia.embrapa.br; forato@cnpdia.embrapa.br; rogerio@cnpdia.embrapa.br; mattoso@cnpdia.embrapa.br; Job, Aldo E. [Universidade Estadual Paulista (UNESP), Presidente Prudente, SP (Brazil). Departamento de Fisica, Quimica e Biologia

    2005-07-01

    Agronomic Institute (IAC) and EMBRAPA Agricultural Instrumentation (EMBRAPA/CNPDIA) have been studied Hevea species in order to increase the production of the natural rubber and to develop new clones more appropriated to Brazil's soil and climate. Structural characterization of natural rubber [Hevea brasiliensis (Willd. ex Adr. de Juss.) Muell. - Arg.] from new clones of the IAC series (IAC 300, 301, 302, 303, 35, 40, and 56) and from RRIM 600 clone has been studied by high-resolution solid-state {sup 13}C NMR and by single pulse technique. The results have shown that the application of solid-state {sup 13}C NMR using the single pulse technique is a powerful tool to study natural rubber. The spectra obtained through this technique confirmed that natural rubber from all clones studied are cis-1,4-polyisoprene (author) form.(author)

  10. Organic acids and protein compounds causing the photoluminescence properties of natural rubber membranes and the quenching phenomena from Au nanoparticle incorporation.

    Science.gov (United States)

    Cabrera, Flávio C; Agostini, Deuber L S; Dos Santos, Renivaldo J; Guimarães, Francisco E G; Guerrero, Ariel R; Aroca, Ricardo F; Job, Aldo E

    2014-12-01

    Natural rubber membranes were fabricated using latex from Hevea brasiliensis trees (clone RRIM 600) by casting, and controlling the time and temperature of thermal treatment. Three temperatures were used: 65, 80 and 120 °C and the corresponding annealing times of 6, 8, 10 and 12 h. The centrifugation of the latex produces the constituent phases: solid rubber (F1), serum or protein components (F2) and bottom fraction (F3). The photoluminescence properties could be correlated with organic acid components of latex. Natural rubber membranes were used as the active substrate (reducing agent) for the incorporation of colloidal Au nanoparticles synthesized by in situ reduction at different times. The intensity of photoluminescence bands assigned to the natural rubber decreases with the increase in amount of nanoparticles present on the membrane surface. It can be assumed that Au nanoparticles may be formed by reduction of the Au cation reacting with functional groups that are directly related to photoluminescence properties. However, the quenching of fluorescence may be attributed to the formation of a large amount of metal nanostructures on the natural rubber surface. Copyright © 2014 John Wiley & Sons, Ltd.

  11. Laboratory performance of asphalt rubber mixtures

    OpenAIRE

    Fontes, Liseane; Trichês, Glicério; Pais, Jorge; Pereira, Paulo; Minhoto, Manuel

    2009-01-01

    Asphalt rubber mixtures are one of the most promising techniques to extend the service life of asphalt pavement overlays. Asphalt rubber binder is composed of crumb rubber from reclaimed tires and conventional asphalt. The asphalt rubber binder can be obtained through wet process in two different systems: tire rubber modified asphalt binder (produced at industrial plants) and continuous blending (produced in asphalt plants). This study presents a laboratory evaluation of asphalt rubber mixtur...

  12. Stretchable and Flexible High-Strain Sensors Made Using Carbon Nanotubes and Graphite Films on Natural Rubber

    Science.gov (United States)

    Tadakaluru, Sreenivasulu; Thongsuwan, Wiradej; Singjai, Pisith

    2014-01-01

    Conventional metallic strain sensors are flexible, but they can sustain maximum strains of only ∼5%, so there is a need for sensors that can bear high strains for multifunctional applications. In this study, we report stretchable and flexible high-strain sensors that consist of entangled and randomly distributed multiwall carbon nanotubes or graphite flakes on a natural rubber substrate. Carbon nanotubes/graphite flakes were sandwiched in natural rubber to produce these high-strain sensors. Using field emission scanning electron microscopy, the morphology of the films for both the carbon nanotube and graphite sensors were assessed under different strain conditions (0% and 400% strain). As the strain was increased, the films fractured, resulting in an increase in the electrical resistance of the sensor; this change was reversible. Strains of up to 246% (graphite sensor) and 620% (carbon nanotube sensor) were measured; these values are respectively ∼50 and ∼120 times greater than those of conventional metallic strain sensors. PMID:24399158

  13. Developments in rubber technology 2 synthetic rubbers

    CERN Document Server

    Lee, K

    1981-01-01

    This book is intended for those people who have a knowledge or understanding of rubber materials and processes but who wish to update their knowledge. It should be read in conjunction with Developments in Rubber Technology-l as that volume discussed developments in natural rubber and selected special purpose synthetic rubbers as well as additives. The authors have been selected for their expertise in each particular field and we, as editors, would like to express our appreciation to the individual authors and also to their companies. Such a book would be impossible to produce without such active cooperation as we have received. Volumes 1 and 2 of Developments in Rubber Technology cover rubbers which are processed and vulcanised in the traditional manner. It is appreciated that the omission of non-vulcanised rubber materials (the so­ called thermoplastic elastomers) will be unwelcome to many readers but it is intended, because of the size of the subject, to cover these materials in a subsequent volume. A.W. K...

  14. Engineered Natural Systems Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — With its pressure vessels that simulate the pressures and temperatures found deep underground, NETL’s Engineered Natural Systems Laboratory in Pittsburgh, PA, gives...

  15. Development of base isolation system for earthquakes and micro-vibrations using laminated thick rubber bearings part 1. ; Characteristics tests for laminated thick rubber bearings. Atsuniku sekiso gomu wo mochiita menshinter dot joshin system no kaihatsu 1. ; Atsuniku sekiso gomu no tokusei shiken

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, T.; Okada, H.; Seki, m.; Sugiyama, K.; Teramura, A.; Uchida, H. (Obayashi Corp., Tokyo (Japan))

    1991-02-10

    Natural rubber type thick laminated rubber bearings being dynamically investigated in order to be adopted to the base isolation system from the traffic and seismic vibrations, experiment was made to contribute to the design. Used were two test models, about 5Hz in natural frequency in the vertical direction. One was designed to support 35t and the other was done to do 200t. As a result, the thick laminated rubber bearing, differently from the conventional thin one, is comparative large in influence of input force vibration frequency, deformation amplitude, axial load, etc. on the dynamic characteristics in both the horizontal and vertical directions, and its dynamic horizontal rigidity varies in a range, 0.6 to 1.45 times as high as the static one, as standardized under the designed axial load condition. The dynamic vertical rigidity of thick laminated rubber bearing at the natural frequency in the vertical direction under the designed axial load condition was also confirmed to be about 30 to 40% higher than the static one, as standardized under the same load condition. Both the thick and thin bearingsare equally assured of about 1 to 2% in equivalent viscosity damping constant. The alteration in characteristics, corresponding to a secularity for 60 years, as investigated by heating deterioration test showed a heightening by about 15 to 20% in both horizontal and vertical rigidities. 5 refs., 29 figs., 3 tabs.

  16. Studies on the Biological Coagulation Technology of Fresh Natural Rubber Latex%鲜胶乳生物凝固工艺技术研究

    Institute of Scientific and Technical Information of China (English)

    姜士宽; 邹建云; 张桂梅; 徐荣; 郭刚军; 黄克昌

    2011-01-01

    研究了生物凝固液用量、鲜胶乳浓度、气候条件、氨含量等因素对鲜胶乳生物凝固效果的影响。结果表明:凝固剂适宜用量为10%;鲜胶乳浓度对凝固影响较小;当全天最高气温在25DC以下时,胶乳完全凝固需16h以上;氨含量达0.02%时即可显著影响胶乳的凝固,用量达到0.08%时。胶乳不能凝固;添加辅助凝固剂可加快胶乳的凝固。%The effects of dosage of bio-coagulation liquid, concentration of natural rubber latex, climate condition and content of ammonia on the speed of bio-coagulation of fresh natural rubber latex were studied. The results showed that the suitable dosage of bio-coagulation liquid was 10% and the influence of content concentration of natural rubber latex on the speed of bio-coagulation was less. It needs more than 16h for natural rubber latex coagulation completely when the temperature was lower than 25 ℃, the content of ammonia had significant effect on bio-coagulation of fresh natural rubber latex and the latex can't coagulation when reached 0.8%and booster can increase the speed of bio-coagulation of fresh natural rubber latex.

  17. Research Advances in Coagulation Methods of Natural Rubber Latex%天然胶乳凝固方法的研究进展

    Institute of Scientific and Technical Information of China (English)

    邱于献; 廖双泉; 何映平

    2012-01-01

    对多年来天然胶乳凝固方法及其研究进展进行综述并作比较分析,指出盐凝固将有望取代目前常用的酸凝固,满足制胶工业规模化生产。%The coagulation methods for natural rubber latex and their research advances in recent years are reviewed.In addition,the differences among the coagulation methods are analyzed,indicating that salted solidification is expected to replace acid solidification to satisfy the large scale production of nature rubber.

  18. Characterisation of macrogel composition from industrial natural rubber samples: Influence of proteins on the macrogel crosslink density

    Directory of Open Access Journals (Sweden)

    S. Rolere

    2016-05-01

    Full Text Available The insoluble (macrogel and soluble fractions of 11 commercial natural rubber (NR samples (Technically specified rubber were separated. Nitrogen titrations and lipid extractions enabled a quantitative assessment of the proteins and extractable lipids in each fraction. Swelling was measured in tetrahydrofuran in order to evaluate the crosslink density (Mc–1 of each macrogel. While the soluble fraction had a high lipid concentration, the majority of non-isoprene compounds of the macrogel were found to be proteins, which accounted for 4.6 to 50.8% (w/w of the macrogel. Indeed, the macrogels contained less than 0.5% (w/w extractable lipids. However, our results showed that the soluble fraction contained large quantities of proteins (16–66% of the nitrogen content of the raw NR sample, probably structuring microaggregates. An exponential correlation (R2 > 0.96 was found between the crosslink density and the protein concentration of macrogel, suggesting that proteins are involved in the majority of crosslinks in macrogel.

  19. Increasing the thermal storage capacity of a phase change material by encapsulation: preparation and application in natural rubber.

    Science.gov (United States)

    Phadungphatthanakoon, Songpon; Poompradub, Sirilux; Wanichwecharungruang, Supason P

    2011-09-01

    Existing encapsulated organic phase change materials (PCM) usually contain a shell material that possesses a poor heat storage capacity and so results in a lowered latent heat storage density of the encapsulated PCM compared to unencapsulated PCM. Here, we demonstrate the use of a novel microencapsulation process to encapsulate n-eicosane (C20) into a 2:1 (w/w) ratio blend of ethyl cellulose (EC):methyl cellulose (MC) to give C20-loaded EC/MC microspheres with an increased heat storage capacity compared to the unencapsulated C20. Up to a 29 and 24% increase in the absolute enthalpy value during crystallization and melting were observed for the encap-C20/EC/MC microparticles with a 9% (w/w) EC/MC polymer content. The mechanism that leads to the increased latent heat storage capacity is discussed. The blending of the water-dispersible C20-loaded EC/MC microspheres into natural rubber latex showed excellent compatibility, and the obtained rubber composite showed not only an obvious thermoregulation property but also an improved mechanical property.

  20. Influence of Filler from a Renewable Resource and Silane Coupling Agent on the Properties of Epoxidized Natural Rubber Vulcanizates

    Directory of Open Access Journals (Sweden)

    Wiphawadee Pongdong

    2015-01-01

    Full Text Available Rice husk ash (RHA was used as a reinforcing filler in epoxidized natural rubber (ENR with various loading levels (0, 10, 20, and 30 phr, and silica filled ENR was also studied for comparison. The effects of RHA content on cure characteristics, mechanical properties, dynamic mechanical properties, and thermoelastic behavior of the filled ENR composites were investigated. It was found that the incorporation of RHA significantly affected the cure characteristics and mechanical properties. That is, the incorporation of RHA caused faster curing reactions and increased Young’s modulus and tensile strength relative to the unfilled compound. This might be attributed to the metal oxide impurities in RHA that enhance the crosslinking reactions, thus increasing the crosslink density. Further improvements in the curing behavior and the mechanical properties of the filled composites were achieved by in situ silanization with bis(triethoxysilylpropyl tetrasulfide (Si69. It was found that the rubber-filler interactions reinforced the composites. This was indicated by the decreased damping characteristic (tan ⁡δ and the other changes in the mechanical properties. Furthermore, the ENR composites with Si69 had improved filler dispersion. Temperature scanning stress relaxation (TSSR results suggest that the metal oxide impurities in RHA promote degradation of the polymer network at elevated temperatures.

  1. Performance of sand and shredded rubber tire mixture as a natural base isolator for earthquake protection

    Science.gov (United States)

    Bandyopadhyay, Srijit; Sengupta, Aniruddha; Reddy, G. R.

    2015-12-01

    The performance of a well-designed layer of sand, and composites like layer of sand mixed with shredded rubber tire (RSM) as low cost base isolators, is studied in shake table tests in the laboratory. The building foundation is modeled by a 200 mm by 200 mm and 40 mm thick rigid plexi-glass block. The block is placed in the middle of a 1m by 1m tank filled with sand. The selected base isolator is placed between the block and the sand foundation. Accelerometers are placed on top of the footing and foundation sand layer. The displacement of the footing is also measured by LVDT. The whole setup is mounted on a shake table and subjected to sinusoidal motions with varying amplitude and frequency. Sand is found to be effective only at very high amplitude (> 0.65 g) of motions. The performance of a composite consisting of sand and 50% shredded rubber tire placed under the footing is found to be most promising as a low-cost effective base isolator.

  2. ESTIMATION OF THE DYNAMIC PROPERTIES OF EPOXY GLASS FABRIC COMPOSITES WITH NATURAL RUBBER PARTICLE INCLUSIONS

    Directory of Open Access Journals (Sweden)

    H. Ravi Sankar

    2013-06-01

    Full Text Available Conventional materials are being replaced in the field of engineering by composite materials, due to their tailorable properties and high specific properties. These materials are extensively used in structural applications. Damping is one of the important properties of the materials used in structures, and needs to be enhanced in order to reduce structural vibrations. In the present work, the improvement of the material damping of glass fabric epoxy composites with particle rubber inclusions is studied. The effect of particle size on the damping and stiffness parameters at different frequencies and temperatures is studied experimentally. Considerable enhancement in damping without significant reduction in stiffness is observed at lower particle sizes. The damping property in both bending and shear modes is more with 0.254 mm rubber particle inclusions among the selected sizes. A lower reduction in stiffness is observed with the inclusion of lower particle sizes (0.254 mm and 0.09 mm when compared with higher particle sizes. An ANN-based prediction model is developed to predict these properties for a given frequency/temperature and particle size. The predicted values are very close to the experimental values with an maximum error of 5%.

  3. Blue rubber bleb naevus

    Directory of Open Access Journals (Sweden)

    Mittal R

    1995-01-01

    Full Text Available A 35 year old female had multiple progressive painful, tender, soft, bluish compressible nodules with the feel of rubber nipples. There was no evidence of gastrointestinal haemangiomas or other systemic abnormalities. Histopathologically, cavernous haemangioma with prominent smooth muscle outline proved the clinical diagnosis of blue rubber bleb naevus. Only cutaneous lesions were seen in the patient.

  4. Mechanical Enhancement of Sensitivity in Natural Rubber Using Electrolytic Polymerization Aided by a Magnetic Field and MCF for Application in Haptic Sensors

    Directory of Open Access Journals (Sweden)

    Kunio Shimada

    2016-09-01

    Full Text Available Sensors are essential to the fulfillment of every condition of haptic technology, and they need simultaneously to sense shear stress as well as normal force, and temperature. They also must have a strong and simple structure, softness, and large extension. To achieve these conditions simultaneously, we enhanced the sensitivity of sensors utilizing natural rubber (NR-latex through the application of electrolytic polymerization focused on the isoprene C=C bonds in natural rubbers such as NR-latex, and then applied a magnetic field and magnetic compound fluid (MCF as magnetically responsive fluid. When an electric field alone was used in the rubber, the effect of electrolytic polymerization was very small compared to the effect in well-known conductive polymer solution such as plastic. The MCF developed by Shimada in 2001 involved magnetite and metal particles, and acts as a filler in NR-latex. By utilizing the magnetic, electric fields and the MCF, we aligned the electrolytically polymerized C=C along the magnetic field line with the magnetic clusters formed by the aggregation of magnetite and metal particles so as to enhance the effect of electrolytic polymerization. We then demonstrated the effectiveness of the new method of rubber vulcanization on the sensitivity of the rubber by experimentally investigating its electric and dynamic characteristics.

  5. Mechanical Enhancement of Sensitivity in Natural Rubber Using Electrolytic Polymerization Aided by a Magnetic Field and MCF for Application in Haptic Sensors.

    Science.gov (United States)

    Shimada, Kunio; Saga, Norihiko

    2016-09-18

    Sensors are essential to the fulfillment of every condition of haptic technology, and they need simultaneously to sense shear stress as well as normal force, and temperature. They also must have a strong and simple structure, softness, and large extension. To achieve these conditions simultaneously, we enhanced the sensitivity of sensors utilizing natural rubber (NR)-latex through the application of electrolytic polymerization focused on the isoprene C=C bonds in natural rubbers such as NR-latex, and then applied a magnetic field and magnetic compound fluid (MCF) as magnetically responsive fluid. When an electric field alone was used in the rubber, the effect of electrolytic polymerization was very small compared to the effect in well-known conductive polymer solution such as plastic. The MCF developed by Shimada in 2001 involved magnetite and metal particles, and acts as a filler in NR-latex. By utilizing the magnetic, electric fields and the MCF, we aligned the electrolytically polymerized C=C along the magnetic field line with the magnetic clusters formed by the aggregation of magnetite and metal particles so as to enhance the effect of electrolytic polymerization. We then demonstrated the effectiveness of the new method of rubber vulcanization on the sensitivity of the rubber by experimentally investigating its electric and dynamic characteristics.

  6. Avaliação do látex e da borracha natural de clones de seringueira no Estado de São Paulo Evaluation of latex and of raw natural rubber of rubber tree clones recommended for the São Paulo State, Brazil

    Directory of Open Access Journals (Sweden)

    Rogério Manoel Biagi Moreno

    2003-05-01

    Full Text Available Este trabalho teve como objetivo avaliar parâmetros do látex e da borracha natural de quatro clones de seringueira [Hevea brasiliensis (Willd. ex Adr. de Juss. Muell.-Arg.] cultivados em larga escala na Fazenda Cambuhy no Município de Matão, Estado de São Paulo. Foram utilizados látex de 20 árvores do estande de cada um dos clones, GT 1, PB 235, IAN 873 e RRIM 600, com 12 anos de idade, no quarto ano de sangria sob o sistema 1/2S d/3 6d/7. 11m/y. ET 5,0%. Pa 12/y. Foram analisados o conteúdo de borracha seca, porcentagem de cinzas, porcentagem de nitrogênio, plasticidade Wallace (P O, índice de retenção de plasticidade e viscosidade Mooney (V R. O conteúdo de borracha seca apresentou tendência de queda com o decréscimo da temperatura ao longo do ano (r = 0,75. Contrário ao conteúdo de borracha seca, as propriedades porcentagem de nitrogênio e porcentagem de cinzas apresentaram tendência de aumento com a redução da temperatura ao longo do período das coletas. A correlação entre P O e V R foi linear e elevada (r = 0,93. Os altos valores de P O e V R indicam que as borrachas dos clones estudados são consideradas como borrachas duras. Os valores do índice de retenção de plasticidade foram baixos, indicando baixa resistência à degradação térmica. Os resultados mostram influência marcante dos fatores climáticos em algumas propriedades dos látices e da borracha natural dos clones estudados, sugerindo condição importante para se entender o comportamento dos mesmos.The objective of the present paper was to evaluate the parameters of latex and natural rubber from four clones of rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss. Muell.Arg.] planted in large scale in Cambuhy plantations in São Paulo State, Brazil. Latex from 20 trees of each 12-year-old clones viz. GT 1, PB 235, IAN 873 and RRIM 600 following the 1/2S d/3 6d/7. 11m/y. ET 5.0%. Pa 12/y tapping system in the fourth year of yielding. The studied

  7. Optimization of processing parameter for fabrication of polylactic acid/liquid natural rubber/graphene nanoplatelet by tensile properties

    Science.gov (United States)

    Shahdan, Dalila; Ahmad, Sahrim Hj.; Chen, Ruey Shan; Ali, Adilah Mat; Zailan, Farrah Diyana

    2016-11-01

    A study on processing parameter of polylactic acid (PLA) and graphene nanoplatelet (GNP) prepared via melt blending method using Haake Rheomix internal mixer. In this study liquid natural rubber (LNR) was used as compatibilizer and at the same time introducing ductile property into the nanocomposite blending. In order to determine the optimal processing parameter, nanocomposites were fabricated from PLA: LNR with ratio of 90:10, and 0.2 wt. % of graphene nanoplatelet with different mixing parameter condition; mixing temperature, rotor speed and mixing time. The optimal processing parameter was determined from the results of tensile testing. An optimum processing parameter of polymer nanocomposite was obtained at 180 °C of mixing temperature, 100 rpm of mixing speed and 14 min of mixing time. The SEM micrographs confirmed the dispersion of GNP in the PLA matrix.

  8. Combination of Tung oil and Natural Rubber Latex in PVA as Water Based Coatings for Paperboard Application

    Directory of Open Access Journals (Sweden)

    Jianprasert Apichaya

    2015-01-01

    Full Text Available This research is focused on the preparation of the PVA/TO/NRL coatings for paperboard by using poly(vinyl alcohol (PVA as substance and blending with Tung oil (TO and/or natural rubber latex (NRL in order to enhance water resistance and dynamic mechanical properties. The effects of TO: NRL ratios on the structures were investigated by water resistance property and dynamic mechanical thermal analysis (DMA. The results showed that the water resistance property was improved by crosslinking of TO and film forming of NRL. The PVA/TO/NRL coating containing both TO and NRL gave better thermal behavior than those with only TO or NRL. For paperboard application, the PVA/TO/NRL coatings were applied on the paperboard to study water affinity and absorption rate on the coated surface. The rate of contact angle change of water on coated paperboards decreased depending on the ratios of TO and NRL.

  9. Utilization of sludge waste from natural rubber manufacturing process as a raw material for clay-ceramic production.

    Science.gov (United States)

    Vichaphund, S; Intiya, W; Kongkaew, A; Loykulnant, S; Thavorniti, P

    2012-12-01

    The possibility of utilization of the sludge waste obtained from the natural rubber manufacturing process as a raw material for producing clay ceramics was investigated. To prepared clay-based ceramic, the mixtures of traditional clay and sludge waste (10-30 wt%) were milled, uniaxilly pressed and sintered at a temperature between 1000 and 1200 degrees C. The effect of sludge waste on the properties of clay-based ceramic products was examined. The results showed that the amount of sludge waste addition had an effect on both sinterability and properties of the clay ceramics. Up to 30 wt% of sludge waste can be added into the clay ceramics, and the sintered samples showed good properties.

  10. Transport behavior of aromatic hydrocarbons through coconut shell powder filled thermoplastic polyurethane/natural rubber blend-composites

    Science.gov (United States)

    Balan, Aparna K.; Sreejith, M. P.; Shaniba, V.; Jinitha, T. V.; Subair, N.; Purushothaman, E.

    2017-06-01

    The transport behavior of homologous series of aromatic solvents through coconut shell powder reinforced thermoplastic polyurethane/natural rubber blend-composites have been investigated in the temperature range 30-70 °C. The diffusion and transport properties of solvents through the composites have been studied in detail, as a function of filler concentration, filler modification, penetrant size and temperature variation. Mol % uptake and transport coefficients such as diffusion coefficient, sorption coefficient and permeation coefficient were estimated and were found to be decreasing with increase in filler loading. The solvent transport is hindered at high concentrations of coconut shell powder. This observation could be correlated with the morphology of the composites. The mechanism of transport is found to be deviated from normal Fickian trend. Activation energy for diffusion is calculated from Arrhenius plots.

  11. Spectroscopic analysis and mechanical properties of electron beam irradiated polypropylene/epoxidized natural rubber (PP/ENR) polymer blends

    Energy Technology Data Exchange (ETDEWEB)

    Senna, Magdy M.H. [National Center for Radiation Research and Technology, P.O.Box 29, Nasr City, Cairo (Egypt)], E-mail: magdysenna@yahoo.com; Abdel-Fattah, Atef A. [National Center for Radiation Research and Technology, P.O.Box 29, Nasr City, Cairo (Egypt); Abdel-Monem, Y.K. [Faculty of Science, Chemistry Department, Menoufia University (Egypt)

    2008-06-15

    Polymer blends based on different ratios of polypropylene (PP) and epoxidized natural rubber (ENR) were prepared by melt extrusion into sheets. The PP/ENR blends were exposed to various dose of accelerated electrons. The formation of free radicals during and after electron beam irradiation was illustrated by electron spin resonance (ESR). Also, the effect of electron beam irradiation on the mechanical and structural morphology was investigated by stress-strain behavior and scanning electron microscope (SEM). The ESR spectra indicated the formation of alkyl and allyl radicals during electron beam irradiation and peroxyl radicals during the post effect. The rate of radical decay was found to be second-order kinetics. The improvement in mechanical properties and structural morphology was confirmed to be due to the effect of electron beam irradiation.

  12. Consideration on International Pricing for Natural Rubber in China%对中国天然橡胶国际定价权的思考

    Institute of Scientific and Technical Information of China (English)

    伍薇

    2011-01-01

    首先对国内天然橡胶定价权的研究成果作了简要的回顾.随后分析了天然橡胶定价权缺失对中国天然橡胶产业的影响,其次阐述了定价权缺失的原因,最后针对原因提出了可行性建议与对策,旨在为中国天然橡胶产业的可持续发展提供决策参考依据。%Firstly, research achievements of pricing for natural rubber in China is briefly reviewed, and then impacts of pricing shortage of natural rubber on natural rubber industry in China is analyzed, Second- ly, the cause of pricing shortage is summarized, and finally feasible advices and countermeasures for cause are put forward, providing a reference for sustainable development of natural rubber industry in China.

  13. Improve the Comprehensive Production Capacity of Natural Rubber by Scientific Management%科学管理提高天然橡胶综合生产能力

    Institute of Scientific and Technical Information of China (English)

    何维景; 符锡照

    2012-01-01

    Analyzed the existing problems in open rubber tapping garden, clarified the way which en- hance natural rubber comprehensive production capacity by long-term planning and scientific management as well as other means, nromote the sustained and healthy economic development of the farm.%分析织簧农场现有橡胶开割胶园中存在的问题,阐明如何通过长远规划,科学管理等手段提高天然橡胶综合生产能力,促进农场经济持续健康发展。

  14. BIODEGRADATION, MORPHOLGICAL, AND FTIR STUDY OF RATTAN POWDER-FILLED NATURAL RUBBER COMPOSITES AS A FUNCTION OF FILLER LOADING AND A SILANE COUPLING AGENT

    Directory of Open Access Journals (Sweden)

    Komethi Muniandy,

    2012-01-01

    Full Text Available Natural rubber (NR composites were prepared by the incorporation of rattan (Calamus Manan powder at filler loadings in the range of 0 to 30 phr into a natural rubber matrix with a laboratory size two roll mill. The particle size of rattan powder was less than 180 µm. The biodegradation of the rattan powder-filled natural rubber (NR composites were investigated as a function of filler loading and a silane coupling agent. A soil burial test was carried out for six months, and the degradation of the NR compound and the NR composites was evaluated through tensile testing. Morphological properties were determined using scanning electron microscopy (SEM to evaluate the degradation of the samples after six months of soil exposure. The results indicate that the tensile strength, elongation at break, and stress at 100% elongation (M 100 all decreased after soil burial testing due to the biological attack by microbes onto the sample. Improvement in tensile properties was seen with the addition of the silane coupling agent due to better adhesion between the rattan filler and the rubber matrix. The deterioration in tensile properties due to the biodegradation process was confirmed by SEM and FTIR studies.

  15. Optimal placement of water-lubricated rubber bearings for vibration reduction of flexible multistage rotor systems

    Science.gov (United States)

    Liu, Shibing; Yang, Bingen

    2017-10-01

    Flexible multistage rotor systems with water-lubricated rubber bearings (WLRBs) have a variety of engineering applications. Filling a technical gap in the literature, this effort proposes a method of optimal bearing placement that minimizes the vibration amplitude of a WLRB-supported flexible rotor system with a minimum number of bearings. In the development, a new model of WLRBs and a distributed transfer function formulation are used to define a mixed continuous-and-discrete optimization problem. To deal with the case of uncertain number of WLRBs in rotor design, a virtual bearing method is devised. Solution of the optimization problem by a real-coded genetic algorithm yields the locations and lengths of water-lubricated rubber bearings, by which the prescribed operational requirements for the rotor system are satisfied. The proposed method is applicable either to preliminary design of a new rotor system with the number of bearings unforeknown or to redesign of an existing rotor system with a given number of bearings. Numerical examples show that the proposed optimal bearing placement is efficient, accurate and versatile in different design cases.

  16. Runaway Rubber Removal

    Science.gov (United States)

    1989-01-01

    High hysteresis Good tract;on characteristic Poor affinity for blending Polyisoprene PI Strong wear resistance Very similar to natural rubber Low...with a "base of cresylic acid and a blend of benzene, with a synthetic detergent for a wetting agent" are recommended [8]. For AC runways, alkaline...you expect the runway to change after rubber is removed? Response Maintenance Operations Pilots Improved Skid Resistance! Brak inq Act ion/Fr ictior 7

  17. Influence of different curing systems on the physico-mechanical properties and stability of SBR and NR rubbers

    CERN Document Server

    Basfar, A A; Mofti, S

    2002-01-01

    The physical properties of radiation, sulfur and peroxide-cured styrene-butadiene rubber (SBR) and natural rubber (NR) were compared. The dependence of the mechanical properties of the radiation-vulcanized SBR and NR on the coagent concentration and radiation dose was studied. The effect of thermal aging on the mechanical properties of the different rubber formulations was discussed. The radiation-cured formulations of SBR have superior mechanical properties and thermal stability compared with those of the chemically vulcanized compounds. Whereas, the radiation-cured formulations of NR have similar mechanical properties but superior thermal stability (based on the % change in E after thermal aging), when compared with those of the sulfur-vulcanized compounds and slightly better than those of the peroxide-vulcanized compounds.

  18. Multilayer graphene rubber nanocomposites

    Science.gov (United States)

    Schartel, Bernhard; Frasca, Daniele; Schulze, Dietmar; Wachtendorf, Volker; Krafft, Bernd; Morys, Michael; Böhning, Martin; Rybak, Thomas

    2016-05-01

    Multilayer Graphene (MLG), a nanoparticle with a specific surface of BET = 250 m2/g and thus made of only approximately 10 graphene sheets, is proposed as a nanofiller for rubbers. When homogenously dispersed, it works at low loadings enabling the replacement of carbon black (CB), increase in efficiency, or reduction in filler concentration. Actually the appropriate preparation yielded nanocomposites in which just 3 phr are sufficient to significantly improve the rheological, curing and mechanical properties of different rubbers, as shown for Chlorine-Isobutylene-Isoprene Rubber (CIIR), Nitrile-Butadiene Rubber (NBR), Natural Rubber (NR), and Styrene-Butadiene Rubber (SBR). A mere 3 phr of MLG tripled the Young's modulus of CIIR, an effect equivalent to 20 phr of carbon black. Similar equivalents are observed for MLG/CB mixtures. MLG reduces gas permeability, increases thermal and electrical conductivities, and retards fire behavior. The later shown by the reduction in heat release rate in the cone calorimeter. The higher the nanofiller concentration is (3 phr, 5 phr, and 10 phr was investigated), the greater the improvement in the properties of the nanocomposites. Moreover, the MLG nanocomposites improve stability of mechanical properties against weathering. An increase in UV-absorption as well as a pronounced radical scavenging are proposed and were proved experimentally. To sum up, MLG is interesting as a multifunctional nanofiller and seems to be quite ready for rubber development.

  19. Biological devulcanization of ground natural rubber by Gordonia desulfuricans DSM 44462(T) strain.

    Science.gov (United States)

    Tatangelo, Valeria; Mangili, Ivan; Caracino, Paola; Anzano, Manuela; Najmi, Ziba; Bestetti, Giuseppina; Collina, Elena; Franzetti, Andrea; Lasagni, Marina

    2016-10-01

    Due to the rapid increase of waste vulcanized rubber products, the development of low-cost, efficient, and selective devulcanization processes is needed. In this paper, the devulcanization ability of Gordonia desulfuricans DSM 44462(T) was evaluated by a design of experiments. The aim of the experimental design was to investigate the importance of parameters influencing the bacterial growth, such as the glucose concentration (C), dibenzothiophene concentration (DBT), and initial biomass (optical density, OD) in biodevulcanization process. The complex viscosity (η*) was chosen as experimental response for the experimental design. A multiple linear regression was used to model the relationship between the response and the process variables. In addition, the crosslink density and gel fraction were measured. Furthermore, the automated ribosomal intergenic spacer analysis (ARISA) as a microbiological method was performed to assess the persistence of the inoculated strain during the experiments. Reduced regression models were obtained considering only the significant variables and interactions. The glucose concentration C and OD variables and C-DBT and DBT-OD interactions resulted to the relevant parameters for the process. The fingerprinting showed the persistence of G. desulfuricans DSM 44462(T), despite the presence of other bacterial population after the VGNR sterilization. These results highlight the importance to support the physics analysis with microbiological analyses to evaluate the bacterial persistence during the treatment.

  20. Dynamic Mechanical Property of Styrene-Butadiene Rubber/Natural Rubber Composite%丁苯橡胶/天然橡胶复合体系动态力学性能

    Institute of Scientific and Technical Information of China (English)

    徐文总; 郝文涛; 马德柱; 梁俐

    2001-01-01

    The dynamic mechanical properties of blends of natural rubberrespectively with three kinds of styrene-butadiene rubbers, two solution polymerized styrene-butadiene rubbers: SSBR(B), SSBR(C) and an emulsion polymerized styrene-butadiene rubber:ESSA have been investigated. The results showed that SSBR(B) had characteristic chain structure and the SSBR/NR composite showed a good compatibility and low heat generation under pressure.%选取乳聚丁苯橡胶、溶聚丁苯橡胶(C)和溶聚丁苯橡胶(B)3种典型的丁苯橡胶,研究了它们与天然橡胶复合体系的动态力学性能.结果表明,溶聚丁苯橡胶SSBR(B)具有特征的链化学结构,与天然橡胶有良好的混容性.溶聚丁苯橡胶/天然橡胶复合体系生热低,而且具有比较均匀的交联网状结构.

  1. Isoprene Rubber Has Broad Market Potential

    Institute of Scientific and Technical Information of China (English)

    Xu Qingsbeng

    2007-01-01

    @@ Isoprene Rubber (IR) is a macro molecular substance polymerized from isoprene monomer, with a structure and properties that are basically similar to those of natural rubber (NR). It features excellent elasticity, wear resistance,heat resistance, low temperature flexibility, etc.

  2. The Effects of Trans- Polyoctylene Rubber (TOR as a Compatibilizer on The Properties of Epoxidized Natural Rubber/Recycled Silicone Catheter (ENR-25/rSC Vulcanizate

    Directory of Open Access Journals (Sweden)

    Dahham Omar S.

    2016-01-01

    Full Text Available In this study, the influence of Trans- Polyoctylene Rubber (TOR as a compatibilizer on the cure characteristics, tensile and physical properties of ENR-25/rSC vulcanizate were determined. Five different loading of TOR (2, 4, 6, 8 and 10 phr were prepared and added into the vulcanizate. Results indicated that the scorch time (t2 and cure time (t90 bacame shorter as TOR increased, while minimum torque (ML and maximum torque (MH increased. The incorporation of TOR with the vulcanizates enhanced the tensile strength (Ts, modulus (M100 crosslinking density and hardness values. However, the elongation at break percentage of compatibilized vulcanizates became lower than uncompatibilized vulcanizates.

  3. Rubber mixing process and its relationship with bound rubber and crosslink density

    Science.gov (United States)

    Hasan, A.; Rochmadi; Sulistyo, H.; Honggokusumo, S.

    2017-06-01

    This research studied the relationship between bound rubber and crosslink density based on rubber mixing process. Bound rubber was obtained after natural rubber was masticated and mixed with rubber chemicals and filler while crosslink density was collected after rubber compound was vulcanized. Four methods are used and each method refers to four ways of incorporating carbon black during mixing. The first method, after rubber was masticated for 5 minutes, the addition of rubber chemicals and filler was done simultaneously. Rubber was masticated for 1 minute and continued mixing of rubber chemicals and filler where mixing was different from first method. This was the second method. The third method was the same as the second method but the filler used N 660 while in the second method N 330. The last method is not the same as the first and second, the rubber is only masticated for 3 minutes and then mixed with filler and followed by rubber chemicals sequentially. The results showed that bound rubber and crosslink density were influenced by mixing and mastication process. Bound rubber dropped and crosslink density was relatively stable in the first three mixing methods for increasing carbon black at the beginning of the mixing process. Bound rubber and crosslink density stated opposite results in the fourth mixing method. The higher the bound rubber the lower the crosslink density. Without regard to mixing methods, there is a non-linear relationship between bound rubber formation and crosslink density determination

  4. Cloning and characterization of the 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway genes of a natural-rubber producing plant, Hevea brasiliensis.

    Science.gov (United States)

    Sando, Tomoki; Takeno, Shinya; Watanabe, Norie; Okumoto, Hiroshi; Kuzuyama, Tomohisa; Yamashita, Atsushi; Hattori, Masahira; Ogasawara, Naotake; Fukusaki, Eiichiro; Kobayashi, Akio

    2008-11-01

    Natural rubber is synthesized as rubber particles in the latex, the fluid cytoplasm of laticifers, of Hevea brasiliensis. Although it has been found that natural rubber is biosynthesized through the mevalonate pathway, the involvement of an alternative 2-C-methyl-D-erythritol 4-phosphate (MEP) pathway is uncertain. We obtained all series of the MEP pathway candidate genes by analyzing expressed sequence tag (EST) information and degenerate PCR in H. brasiliensis. Complementation experiments with Escherichia coli mutants were performed to confirm the functions of the MEP pathway gene products of H. brasiliensis together with those of Arabidopsis thaliana, and it was found that 1-deoxy-D-xylulose-5-phosphate reductoisomerase, 2-C-methyl-D-erythritol 4-phosphate cytidylyltransferase, and 2-C-methyl-D-erythritol 2,4-cyclodiphosphate synthase of H. brasiliensis were functionally active in the E. coli mutants. Gene expression analysis revealed that the expression level of the HbDXS2 gene in latex was relatively high as compared to those of other MEP pathway genes. However, a feeding experiment with [1-(13)C] 1-deoxy-D-xylulose triacetate, an intermediate derivative of the MEP pathway, indicated that the MEP pathway is not involved in rubber biosynthesis, but is involved in carotenoids biosynthesis in H. brasiliensis.

  5. Análise econométrica da demanda brasileira de importação de borracha natural, de 1964 a 2005 Econometric analysis of Brazilian import demand for natural rubber during 1964-2005

    Directory of Open Access Journals (Sweden)

    Naisy Silva Soares

    2008-12-01

    Full Text Available Este trabalho teve por objetivos especificar e estimar a demanda brasileira de importação de borracha natural, no período de 1964 a 2005. As variáveis explicativas do modelo de demanda de importação foram: preço de importação da borracha natural, PIB per capita, taxa de câmbio, taxa de juros, quantidade de borracha natural produzida internamente e tendência. As estimativas obtidas utilizando o modelo de ajustamento parcial confirmaram que as variáveis explicativas afetam, significativamente, a demanda brasileira de importação de borracha natural. Os resultados apontaram que a demanda brasileira de importação de borracha natural é inelástica com relação ao preço de importação e à renda; é pouco sensível a variações no preço de importação, à taxa de câmbio, à renda e à taxa de juros, mas é sensível às variações na quantidade de borracha natural produzida internamente, no curto e longo prazos; e a borracha natural é um bem normal.This work aimed to specify and estimate the Brazilian import demand for natural rubber from 1964 to 2005. The variables applied to explain import demand were: natural rubber import price, GNP per capita, exchange nominal rate (R$/US$, "overnight" interest rate, natural rubber domestic production and trend. The estimates showed that the variables significantly affected the Brazilian import demand for natural rubber. The results indicated that the Brazilian import demand for natural rubber is inelastic in relation to import price and income; little sensitive to variations in import price, exchange nominal rate (R$/US$, income and "overnight" interest rate but it is sensitive to domestic rubber production variations , in the short and long runs; and that natural rubber is a regular commodity.

  6. Natural light illumination system.

    Science.gov (United States)

    Whang, Allen Jong-Woei; Chen, Yi-Yung; Yang, Shu-Hua; Pan, Po-Hsuan; Chou, Kao-Hsu; Lee, Yu-Chi; Lee, Zong-Yi; Chen, Chi-An; Chen, Cheng-Nan

    2010-12-10

    In recent years, green energy has undergone a lot of development and has been the subject of many applications. Many research studies have focused on illumination with sunlight as a means of saving energy and creating healthy lighting. Natural light illumination systems have collecting, transmitting, and lighting elements. Today, most daylight collectors use dynamic concentrators; these include Sun tracking systems. However, this design is too expensive to be cost effective. To create a low-cost collector that can be easily installed on a large building, we have designed a static concentrator, which is prismatic and cascadable, to collect sunlight for indoor illumination. The transmission component uses a large number of optical fibers. Because optical fibers are expensive, this means that most of the cost for the system will be related to transmission. In this paper, we also use a prismatic structure to design an optical coupler for coupling n to 1. With the n-to-1 coupler, the number of optical fibers necessary can be greatly reduced. Although this new natural light illumination system can effectively guide collected sunlight and send it to the basement or to other indoor places for healthy lighting, previously there has been no way to manage the collected sunlight when lighting was not desired. To solve this problem, we have designed an optical switch and a beam splitter to control and separate the transmitted light. When replacing traditional sources, the lighting should have similar characteristics, such as intensity distribution and geometric parameters, to those of traditional artificial sources. We have designed, simulated, and optimized an illumination lightpipe with a dot pattern to redistribute the collected sunlight from the natural light illumination system such that it equals the qualities of a traditional lighting system. We also provide an active lighting module that provides lighting from the natural light illumination system or LED auxiliary

  7. Natural Rubber Production, Supplying and Marketing in China and Foreign Countries%国内外天然橡胶产供销分析及其趋势预测

    Institute of Scientific and Technical Information of China (English)

    陈抒; 黄循精

    2013-01-01

    分析全球天然橡胶的生产、进出口贸易、消费和库存情况,对未来天然橡胶产量、消费量和价格进行估计;并预测和展望今后全球天然橡胶的供求情况.%Analysis of global natural rubber production, import and export trade, consumption and inventory, the future of natural rubber production, consumption and price were estimated, and the future relationship between supply and demand of the global natural rubber were forecasted and prospected.

  8. The system of nature

    CERN Document Server

    D'Holbac, Baron

    1999-01-01

    "The source of Man's unhappiness is his ignorance of Nature."D'Holbach believed that the misery he saw in mankind around him was caused by religion and its superstitious beliefs - that there was a God who controlled destiny and would reward or punish individuals. The System of Nature was written to replace these delusions with a schema of understanding based solely on the physical workings of nature. "Let Man study this nature, let him learn her laws, contemplate her energies." For d'Holbach the soul is only the physical body, understood from a certain point of view, which dies when the body dies. All the events and the nature of the world can be understood in terms of the motion and properties of matter; even the tiniest causes contribute to huge events - a simple change in the diet of an Emperor (or some other such insignificant cause), he suggests might have been capable of "saving kingdoms." For him, nature's laws are fixed and necessary, and if Man wants to find happiness it is best to accept this - if g...

  9. Finite element analysis of the laminated rubber bearingused in base isolation system. Sekiso gum isolater no yugen yoso kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Takayama, M.; Tada, H. (Fukuoka Univ., Fukuoka (Japan). Faculty of Engineering)

    1990-09-01

    Characteristics of the laminated rubber bearing for a base isolation system of buildings were analyzed by a finite element method. Instead of an elastic modulus and Poisson {prime} s ratio, the rubber material was characterized by a strain energy function for modeling, and material constants were determined in the biaxial tensile test of rubber sheets before analyzing. The nonlinear stress analysis program based on a modified variational principle was used together with the model with 4,136 elements and 7,120 nodes in total. The compressive analysis was conducted up to 1,000kgf/cm {sup 2} in compressive stress, and the compressive shearing one up to 370% in horizontal deformability (ratio of horizontal deformation to total rubber thickness). As a result, the load-deformation characteristics were well agreed between the analysis and experiment. Large strain was observed in the periphery of the rubber bearing and no strain in the central portion under a compressive load condition, while uniform strain was observed over the central area under a compressive shearing load condition. 7 refs., 26 figs.

  10. Development of base-isolation system for lightweight structure. Rubber bearing isolation with soft landing system applied to 2-story wooden structure; Keiryo kozobutsuyo menshin system no kaihatsu. Mokuzo nikaidate sakagura kenchiku ni tekiyoshita soft landing menshin koho

    Energy Technology Data Exchange (ETDEWEB)

    Teramura, A.; Nobara, A.; Inaba, S.; Tanaka, K.; Manbo, H. [Obayashi Corp., Tokyo (Japan)

    1999-01-10

    When a laminated rubber bearing base-isolation system is used in a lightweight structure, it is difficult to ensure that the rubber bearing can withstand larger deformation and longer period. This report describes the application of a laminated rubber bearing and soft landing system to a 2-story wooden structure. The soft landing system can prevent buckling of the laminated rubber bearing in case of strong earthquake motion, which was confirmed by earthquake response analysis. As a result, the seismic performance of the structure and the effect of the soft landing system were verified. (author)

  11. Polyacrylamido-2-methyl-1-propane sulfonic acid-grafted-natural rubber as bio-adsorbent for heavy metal removal from aqueous standard solution and industrial wastewater.

    Science.gov (United States)

    Phetphaisit, Chor Wayakron; Yuanyang, Siriwan; Chaiyasith, Wipharat Chuachuad

    2016-01-15

    Bio-adsorbent modified natural rubber (modified NR) was prepared, by placing the sulfonic acid functional group on the isoprene chain. This modification was carried out with the aim to prepare material capable to remove heavy metals from aqueous solution. The structures of modified NR materials were characterized by FT-IR and NMR spectroscopies. Thermal gravimetric analysis of modified NR showed that the initial degradation temperature of rubber decreases with increasing amount of polyacrylamido-2-methyl-1-propane sulfonic acid (PAMPS) in the structure. In addition, water uptake of the rubber based materials was studied as a function of time and content of PAMPS. The influence of the amount of PAMPS grafted onto NR, time, pH, concentration of metal ions, temperature, and regeneration were studied in terms of their influence on the adsorption of heavy metals (Pb(2+), Cd(2+) and Cu(2+)). The adsorption isotherms of Pb(2+) and Cd(2+) were fitted to the Freundlich isotherm model, while Cu(2+) was fitted to the Langmuir isotherm. However, the results from these two isotherms resulted in a similar behavior. The adsorption capacity of the modified NR for the various heavy metals was in the following order: Pb(2+)∼Cd(2+)>Cu(2+). The maximum adsorption capacities of Pb(2+), Cd(2+), and Cu(2+) were 272.7, 267.2, and 89.7 mg/g of modified rubber, respectively. Moreover, the modified natural rubber was used for the removal of metal ions in real samples of industrial effluents where the efficiency and regeneration were also investigated.

  12. Rubber Reclamation

    Science.gov (United States)

    Williams, Kathryn R.

    2007-01-01

    The safety and health hazards related to recycling of used rubber, due to the scarcity and high price of virgin rubber are reported. Various threats like stagnant water pools trapped in tires leading to diseases and ignited tires, which become very difficult to extinguish and generating smoke that is extremely detrimental to the environment, have…

  13. Preparation and characterization of nanocomposites of natural rubber with polystyrene and styrene-methacrylic acid copolymer nanoparticles

    Directory of Open Access Journals (Sweden)

    T. Nuruk

    2012-06-01

    Full Text Available Composites of natural rubber (NR/vinyl polymer nanoparticles as polystyrene (PS and poly(styrenemethacrylic acid (P(S-MAA were prepared by heterocoagulation technique. The polymer nanoparticles were prepared by emulsifier-free emulsion polymerizations at 70°C using potassium persulfate as initiator. Under acidic condition where positive charge was present on the NR latex (NRL surface, the nanoparticles having negative charge mainly from sulfate group of initiator were able to adsorb on the NRL surface, the electrostatic interaction being the driving force. The scanning electron micrographs showed that the polymer nanoparticles are homogenously distributed throughout NR matrix as nanoclusters with an average size of about 500 and 200 nm for PS and P(S-MAA, respectively. The mechanical properties of NR/PS and NR/P(S-MAA composite films were compared with the NR host. The nanocomposites, particularly when the polymer nanoparticles are uniformly dispersed, possess significantly enhanced mechanical properties strongly depending on the morphology of the nanocomposites.

  14. Polymer blends made of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) and epoxidized natural rubber: Thermal and mechanical response

    Science.gov (United States)

    Salim, Yoga Sugama; Han, Chan Chin; Kammer, Hans-Werner; Kumar, Sudesh; Neon, Gan Seng

    2015-08-01

    The ever-increasing demand of biodegradable over conventional polymers places microbial polyhydroxyalkanoates (PHA) as an ideal choice of research material for specific applications. In this study, polymer blends made of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx) and epoxidized natural rubber (ENR) were prepared using solution casting technique. The influence of ENR on thermal, morphological and mechanical properties of P(3HB-co-3HHx) was investigated. There are two glass transition (Tg) temperatures observed using differential scanning calorimeter. This indicates that P(3HB-co-3HHx) and ENR are immiscible at macroscopic level. Although the Tg of P(3HB-co-3HHx) is seen to shift toward ENR in the least manner, infrared analysis suggests that the crystal structure of P(3HB-co-3HHx) retains its conformational structure. In terms of morphology, ENR exists as droplets in P(3HB-co-3HHx)-rich phase, e.g. at ENR weight fraction (wENR) of 0.3. In dynamic mechanical analysis, all blend compositions exhibit solid-like behavior, with storage moduli larger than loss moduli, across the frequency sweep at room temperature.

  15. Effect of chitosan content on gel content of epoxized natural rubber grafted with chitosan in latex form.

    Science.gov (United States)

    Riyajan, Sa-Ad; Sukhlaaied, Wattana

    2013-04-01

    The epoxidized natural rubber (ENR) latex-g-chitosan (ENR-g-chitosan) was prepared in latex form using potassium persulphate as an initiator. Firstly, the reduction in molecular weight of chitosan was subjected to the addition of K2S2O8 at 70 °C for 15 min. The structure of the modified chitosan was characterized by ATR-FTIR. Secondarily, the influence of chitosan contents, reaction time, and temperature and K2S2O8 concentrations on the gel content of the modified ENR was investigated. The chemical structure of the ENR-g-chitosan was confirmed by (1)H-NMR and ATR-FTIR. The ether linkage of the ENR-g-chitosan was conformed at 1154 an 1089 cm(-1) by ATR-FTIR and 3.60 ppm by (1)H-NMR. The gel content of ENR-g-chitosan at 5% chitosan showed the highest value compared with other samples. But when chitosan increased from 5% to 10% or 20%, the gel content of ENR-g-chitosan dramatically decreased. The ENR-g-chitosan showed good thermal resistance due to incorporation of chitosan. The morphology of ENR-g-chitosan particle showed the core-shell structure observed by TEM. The optimum condition of grafting ENR with chitosan was found at 65°C for 3h of reaction time, ratio of ENR/chitosan at 9:1.

  16. Reinforcement of natural rubber hybrid composites based on marble sludge/Silica and marble sludge/rice husk derived silica

    Directory of Open Access Journals (Sweden)

    Khalil Ahmed

    2014-03-01

    Full Text Available A research has been carried out to develop natural rubber (NR hybrid composites reinforced with marble sludge (MS/Silica and MS/rice husk derived silica (RHS. The primary aim of this development is to scrutinize the cure characteristics, mechanical and swelling properties of such hybrid composite. The use of both industrial and agricultural waste such as marble sludge and rice husk derived silica has the primary advantage of being eco-friendly, low cost and easily available as compared to other expensive fillers. The results from this study showed that the performance of NR hybrid composites with MS/Silica and MS/RHS as fillers is extremely better in mechanical and swelling properties as compared with the case where MS used as single filler. The study suggests that the use of recently developed silica and marble sludge as industrial and agricultural waste is accomplished to provide a probable cost effective, industrially prospective, and attractive replacement to the in general purpose used fillers like china clay, calcium carbonate, and talc.

  17. Tailoring percolating conductive networks of natural rubber composites for flexible strain sensors via a cellulose nanocrystal templated assembly.

    Science.gov (United States)

    Wang, Shuman; Zhang, Xinxing; Wu, Xiaodong; Lu, Canhui

    2016-01-21

    Conductive polymer composites (CPCs) just above the percolation threshold exhibit a unique strain-reversible electric response upon application of tensile strain, which can be used to prepare strain sensors. However, it is difficult to balance the electric conductivity which is fundamental to a stable output signal and the strain sensing sensitivity due to the relatively dense conductive pathways of the traditional CPCs. Constructing a "brittle" but effective conductive network structure in CPCs is the essential foundation of a desirable sensing material. Here, we demonstrate for the first time that highly flexible, stretchable, sensitive, and reversible strain sensors can be fabricated by a facile latex assembly approach, in which nontoxic, sustainable and biodegradable cellulose nanocrystals played a key role in tailoring the percolating network of conductive natural rubber (NR)/carbon nanotube (CNT) composites. The resulting nanocomposites with a continuous 3D conductive structure exhibited a very low electrical conductivity percolation threshold (4-fold lower than that of the conventional NR/CNT composites), high resistivity and sensitivity (gauge factor ≈ 43.5) and meanwhile good reproducibility of up to 100% strain. The proposed materials and principles in this study open up a novel practical approach to design high performance flexible sensors for a broad range of multifunctional applications.

  18. 紫炭黑/天然橡胶共混胶性能的研究%Preparation and properties of purple carbon black/natural rubber composities

    Institute of Scientific and Technical Information of China (English)

    孙程; 赵艳芳; 廖小雪; 罗明超; 廖双泉

    2013-01-01

    采用机械共混法,探讨了紫炭黑(PCB)用量以及紫炭黑经偶联剂Si69改性后对紫炭黑/天然橡胶共混胶力学性能和热稳定性的影响,通过扫描电子显微镜(SEM)观察紫炭黑/天然橡胶共混胶的分散情况和断面形貌.结果表明,紫炭黑能提高橡胶的力学性能和热稳定性,经硅烷偶联剂Si69改性处理的紫炭黑可提高共混胶的力学性能,当Si69的用量为紫炭黑质量的8%时,胶料的力学性能最佳,其拉伸强度达到29.48 MPa.%The effects of the amount of PCB (Purple Carbon Black) and coupling agent Si69 modified PCB on PCB/NR (Nature Rubber) blended rubber's mechanical property and thermal stability were discussed with mechanical blending method. Dispersion and surface topography of the blended rubber were observed by SEM (Scanning Electron Microscope). The results showed that PCB could improve rubber's mechanical property and thermal stability; PCB modified with Si69 could improve blended rubber's mechanical property,which could reach the best tensile strength 29. 48 MPa when the mount of Si69 was 8% of PCB.

  19. Development of rubber gloves by radiation vulcanization

    Science.gov (United States)

    Makuuchi, K.; Yoshii, F.; Ishigaki, I.; Tsushima, K.; Mogi, M.; Saito, T.

    The processes of radiation vulcanization and production of protective rubber gloves for radioactive contamination are described. A newly developed sensitizing system consisting of 5 phr 2-ethylhexyl acrylate and 1 phr carbon tetrachloride was used to vulcanize natural rubber latex at 12 kGy. Transparent and soft gloves were obtained from the radiation vulcanized latex by a coagulant dipping process. The mechanical properties of the gloves meet Japanese Industrial Standard specification for protective gloves. Combustion analysis of the gloves revealed that the amount of evolved sulfur dioxide and remaining ashes are less than those from commercially available rubber gloves. A trial usage of the gloves at a nuclear power plant showed that the gloves were easy to use for delicate work without undergoing fatigue.

  20. Technological properties of latex and natural rubber of Hevea brasiliensis clones Propriedades tecnológicas do látex e da borracha natural de clones de Hevea brasiliensis

    Directory of Open Access Journals (Sweden)

    Rogério Manoel Biagi Moreno

    2005-04-01

    Full Text Available Rubber industry has increased the requirements for quality and uniformity of natural rubber produced in Brazil. Technological properties of latex and natural rubber of clones GT 1, PB 235, IAN 873 and RRIM 600 [Hevea brasiliensis (Willd. Former Adr. de Juss. Muell.- Arg] were evaluated by standard methods of the dry rubber content (DRC%, percentage of nitrogen (N% and percentage of ashes (ASH% in two consecutive years; data were correlated with temperature and precipitation. Properties of latex and natural rubber varied (P A indústria da borracha está cada vez mais exigente em relação à qualidade e a uniformidade da borracha natural produzida no Brasil. Neste trabalho as propriedades tecnológicas do látex e da borracha natural dos clones de seringueira GT 1, PB 235, IAN 873 e RRIM 600 [Hevea brasiliensis (Willd. ex Adr. de Juss. Muell.-.Arg] foram avaliadas pelos ensaios padrões do conteúdo de borracha seca (DRC%, porcentagem de nitrogênio (N% e porcentagem de cinzas (CNZ% por dois anos consecutivos; os dados obtidos foram correlacionados com dados de temperatura e precipitação. As propriedades do látex e da borracha natural variaram (P < 0.01 em função do tipo de clone e entre coletas. O DRC% diminuiu no início da estação seca (maio a junho, enquanto N% e CNZ% aumentaram. O período de abril a junho revelou ser crítico, pois os valores da N% oscilaram acima 0,60%, fora dos padrões estabelecidos pela norma técnica brasileira ABNT/NBR. O clone RRIM 600 foi menos suscetível às variações climáticas.

  1. Dynamics of vibration isolation system with rubber-cord-pneumatic spring with damping throttle

    Science.gov (United States)

    Burian, Yu A.; Silkov, M. V.

    2017-06-01

    The study refers to the important area of applied mechanics; it is the theory of vibration isolation of vibroactive facilities. The design and the issues of mathematical modeling of pneumatic spring perspective design made on the basis of rubber-cord shell with additional volume connected with its primary volume by means of throttle passageway are considered in the text. Damping at the overflow of air through the hole limits the amplitude of oscillation at resonance. But in contrast to conventional systems with viscous damping it does not increase transmission ratio at high frequencies. The mathematical model of suspension allowing selecting options to reduce the power transmission ratio on the foundation, especially in the high frequency range is obtained

  2. Preparation of Hydrogenated Nitrile Rubber

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Hydrogenated nitrile rubber is an oil and solvent resistant rubber and particularly give more resistant to heat, ozone, light. It is generally prepared from nitrile rubber by selective hydrogenation using a suitable catalyst system. In the present work a prepared method was adapted for the hydrogenation reaction of nitrile rubber using homogeneous tris(tri-phenlphosphine)chlorhodium(I) catalyst (RhCl(PPh3)) system. The hydrogenation reaction was carriedout at different temperature, pressure, time and catalyst concentration, the concentration, the conditions of hydrogenation are stated in table 1.

  3. Preparation of Hydrogenated Nitrile Rubber

    Institute of Scientific and Technical Information of China (English)

    LIU; ZhiCai

    2001-01-01

    Hydrogenated nitrile rubber is an oil and solvent resistant rubber and particularly give more resistant to heat, ozone, light. It is generally prepared from nitrile rubber by selective hydrogenation using a suitable catalyst system. In the present work a prepared method was adapted for the hydrogenation reaction of nitrile rubber using homogeneous tris(tri-phenlphosphine)chlorhodium(I) catalyst (RhCl(PPh3)) system.  The hydrogenation reaction was carriedout at different temperature, pressure, time and catalyst concentration, the concentration, the conditions of hydrogenation are stated in table 1.  ……

  4. Workers' compensation claims related to natural rubber latex gloves among Oregon healthcare employees from 1987–1998

    Directory of Open Access Journals (Sweden)

    Kammeyer-Mueller John

    2002-09-01

    Full Text Available Abstract Background Occupational reaction to natural rubber latex (NRL glove use by healthcare employees has been an area of increasing concern. Unfortunately, there is little data demonstrating the prevalence and severity of actual reactivity to NRL. Method Occupational reaction to NRL was estimated using workers' compensation claims filed by healthcare employees in Oregon for the period of 1987–1998. For the first ten years, these claims were estimated by source and conditions consistent with NRL glove reactions, while in the last two years a specific code developed in 1997 for NRL glove reactions was also employed. Results The claim rate was on average 0.58 per 10,000 healthcare workers annually, which constituted 0.29% of all workers' compensation claims. The most common condition experienced was dermatitis (80% and most common body part affected was the hands (55.4%. The majority of claimants, 45 (69.2%, reported taking less than a month off work, suggesting most reactions were minor in nature, although one fatality was reported. The average NRL claim cost was $8,309.48. Overall the average cost per insured healthcare worker was approximately $0.50 per year. The occupational groups with the highest number of claims were nurses (30.8% of claimants and nursing aides and orderlies (24.6% of claimants. Conclusions In comparison with other workers' compensation claims filed by healthcare workers during this period, 0.25% of the total was potentially related to NRL gloves. The rare incidence of respiratory and ocular claims is inconsistent with the hypothesis that asthmatic or conjunctival reactions to NRL gloves are common.

  5. Study on the Properties of Pioyisoprene Rubber synthesized by Rare-Earth Catalysts/Natural Rubber Blends%稀土异戊橡胶与天然橡胶共混胶性能的研究

    Institute of Scientific and Technical Information of China (English)

    于琦周; 李柏林; 张新惠; 张学全; 白晨曦

    2011-01-01

    对不同共混比的稀土异戊橡胶(NdIR)/天然橡胶(NR)共混胶的硫化特性及物理机械性能进行了系统研究,并与俄罗斯钛体系异戊橡胶(SK-3)及SK-3/NR共混胶的性能进行了对比.结果表明,Nd]R/NR的相容性好于SK-3/NR;NdIR/NR共混胶较好地保持了NR原有的高拉伸、高抗撕裂性能,并能有效提高交联密度和拉断伸长率,其焦烧时间得到适当延长;NdIR/NR共混胶没有出现炭黑团聚和微相分离现象,NdIR在某些领域可替代天然橡胶.%Curing characteristics of ployisoprene rubber synthesized by rare-earth catalysts (NdIR)/natural rubber(NR)blends with deferent blending ratio as well as physical-mechanical properties of those vulcanizetes were studied, and they were compared with Russian ployisoprene rubber synthesized by titanium catalysts (SK-3) and SK-3/NR blends. The results showed that NdlR / NR blends had better compatibility with carbon black than SK-3/NR blends, and better maintained the original high tensile strength and high anti-tear strength of NR, and the crosslink density and elongation at break were improved, and the scorch time was prolonged, too. According to the distribution of carbon black, there was no phenomenon of carbon black aggregating and micro-phase separation in NdIR/NR blends. NdIR could be used partially or completely to replace NR.

  6. Magnesium affects rubber biosynthesis and particle stability in Ficus elastica, Hevea brasiliensis and Parthenium argentatum

    Science.gov (United States)

    Natural rubber biosynthesis occurs in laticifers of Ficus elastica and Hevea brasiliensis, and in parenchyma cells of Parthenium argentatum. Natural rubber is synthesized by rubber transferase using allylic pyrophosphates as initiators, isopentenyl pyrophosphate as monomeric substrate and magnesium ...

  7. Effect of liquid epoxidized natural rubber (LENR) on mechanical properties and morphology of natural rubber/high density polyethylene/mengkuang fiber (NR/HDPE/MK) bio-composite

    Science.gov (United States)

    Piah, Mohd Razi Mat; Baharum, Azizah

    2016-11-01

    The use of mengkuang fiber (MK) fibers in NR/HDPE (40/60) blend was studied via surface modification of fiber. The MK fiber was pre-washed with 5%wt/v sodium hydroxide solution prior to treatment with liquid epoxidized natural rubber (LENR). The concentration of LENR were varied from 5%-20%wt in toluene. The effects of LENR concentrations were studied in terms of mechanical properties and morphology formed. Melt-blending was performed using an internal mixer (Haake Rheomix 600). The processing parameters identified were 135°C temperature, 45 rpm rotor speed, 12 minutes processing time and at 20%wt MK fiber loading. The optimum LENR treatment concentration was obtained at 5%wt with tensile strength, tensile modulus, and impact strength of 10.3 MPa, 414.2 MPa and 14.4 kJ/m2 respectively. The tensile modulus of LENR-treated MK fiber filled NR/HDPE bio-composite has shown enhancement up to 16.7% higher than untreated MK fiber. The tensile and impact strength were decreased with increasing LENR concentration due to the broken of MK fibers to smaller particles and adhered to each other. FESEM micrographs confirmed the formation of fiber-fiber agglomeration in NR/HDPE blends. The optical microscope analysis shows MK fibers is shorter than original fiber lengths after NaOH-LENR surface modification. The internal bonding forces of MK fiber seems to be weaker than external force exerted on it, therefore, the MK fiber has broken to smaller particles and reduced the mechanical properties of NR/HDPE/MK(20%) bio-composite.

  8. Properties of natural rubber coagulated by microwave radiation%微波辐射凝固天然橡胶的性能研究

    Institute of Scientific and Technical Information of China (English)

    李一民; 廖建和; 赵艳芳; 廖禄生; 黄桂春; 陈桂雄

    2011-01-01

    A new coagulation method,that is microwave radiation coagulation ( MRC ), and traditional coagulation methods were used to coagulate natural rubber and then compared properties of the rubbers. Suitable laboratory microwave coagulation conditions were explored by orthogonal test. Microwave radiation coagulation natural rubber (NR - m) , acid coagulation natural rubber (NR - a) and natural coagulation natural rubber (NR- n)were prepared and their properties were studied, the results showed that,as to the physical and chemical properties,nitrogen content of NR- m are much higher than NR - a and NR - n, initial plasticity of NR - m is higher than NR - a. As to physical and mechanical properties, stretching stress and tensile strength of NR - m are higher than NR - a before aging, while tensile strength retention after aging of NR- m is lower than NR- a,but relatively higher than NR ~ n. As to the curing behaviors, vulcanization induction time of NR - m is shorter than either NR -a and NR - n, while maximum torque and curing rate are much higher.%采用新型微波辐射凝固法凝固天然橡胶,并与传统天然橡胶凝固方法作比较,对其性能进行了全面研究.通过正交实验探索了实验室微波辐射凝固的适宜工艺条件.对比了微波辐射凝固胶(NR - m)、酸凝固胶(NR-a)和自然凝固胶(NR -n)的性能,结果表明,在理化性能方面,NR-m的氮含量比NR-a和NR-n高,塑性初值比NR-a高;在物理机械性能方面,NR -m硫化胶老化前的定伸应力和拉伸强度比NR-a高,老化后的拉伸强度保持率比NR-a低,但比NR-n高;在硫化特性方面,NR -m的硫化诱导时间比NR-a和NR-n的短,最大转矩和硫化速度更高.

  9. Application of waste clay in natural rubber%废白土在天然橡胶中的应用性能

    Institute of Scientific and Technical Information of China (English)

    徐云慧; 李培培; 张兆红; 赵静静; 黎丽; 王仕峰

    2011-01-01

    This article describes the use of waste clay as filler and softener,and its application in natural rubber.With the same number of parts of pottery clay(and 3 parts of aromatic hydrocarbon)for performance comparison.the results showed that waste clay could be used as befillers and softener in natural rubber.And the performance of the rubber with waste clay as filler was good,such as liquidity,scorch resistance,tearing permanent deformation,abrasion resistance,impact flexibility,elongation,anti-aging.%研究了废白土做填充剂及软化剂在天然橡胶中的应用,并与同份数的陶土(同时添加3份芳烃油)进行性能对比。结果表明:废白土可以作为填充剂和软化剂应用于天然橡胶中,且以废白土为填料的胶料流动性、焦烧性、扯断永久变形性能好、耐磨耗性能、冲击弹性、伸长率、耐老化性能均好。

  10. Development of a Hybrid Piezo Natural Rubber Piezoelectricity and Piezoresistivity Sensor with Magnetic Clusters Made by Electric and Magnetic Field Assistance and Filling with Magnetic Compound Fluid

    Directory of Open Access Journals (Sweden)

    Kunio Shimada

    2017-02-01

    Full Text Available Piezoelements used in robotics require large elasticity and extensibility to be installed in an artificial robot skin. However, the piezoelements used until recently are vulnerable to large forces because of the thin solid materials employed. To resolve this issue, we utilized a natural rubber and applied our proposed new method of aiding with magnetic and electric fields as well as filling with magnetic compound fluid (MCF and doping. We have verified the piezoproperties of the resulting MCF rubber. The effect of the created magnetic clusters is featured in a new two types of multilayered structures of the piezoelement. By measuring the piezoelectricity response to pressure, the synergetic effects of the magnetic clusters, the doping and the electric polymerization on the piezoelectric effect were clarified. In addition, by examining the relation between the piezoelectricity and the piezoresistivity created in the MCF piezo element, we propose a hybrid piezoelement.

  11. Development of a Hybrid Piezo Natural Rubber Piezoelectricity and Piezoresistivity Sensor with Magnetic Clusters Made by Electric and Magnetic Field Assistance and Filling with Magnetic Compound Fluid.

    Science.gov (United States)

    Shimada, Kunio; Saga, Norihiko

    2017-02-10

    Piezoelements used in robotics require large elasticity and extensibility to be installed in an artificial robot skin. However, the piezoelements used until recently are vulnerable to large forces because of the thin solid materials employed. To resolve this issue, we utilized a natural rubber and applied our proposed new method of aiding with magnetic and electric fields as well as filling with magnetic compound fluid (MCF) and doping. We have verified the piezoproperties of the resulting MCF rubber. The effect of the created magnetic clusters is featured in a new two types of multilayered structures of the piezoelement. By measuring the piezoelectricity response to pressure, the synergetic effects of the magnetic clusters, the doping and the electric polymerization on the piezoelectric effect were clarified. In addition, by examining the relation between the piezoelectricity and the piezoresistivity created in the MCF piezo element, we propose a hybrid piezoelement.

  12. Development of a Hybrid Piezo Natural Rubber Piezoelectricity and Piezoresistivity Sensor with Magnetic Clusters Made by Electric and Magnetic Field Assistance and Filling with Magnetic Compound Fluid

    Science.gov (United States)

    Shimada, Kunio; Saga, Norihiko

    2017-01-01

    Piezoelements used in robotics require large elasticity and extensibility to be installed in an artificial robot skin. However, the piezoelements used until recently are vulnerable to large forces because of the thin solid materials employed. To resolve this issue, we utilized a natural rubber and applied our proposed new method of aiding with magnetic and electric fields as well as filling with magnetic compound fluid (MCF) and doping. We have verified the piezoproperties of the resulting MCF rubber. The effect of the created magnetic clusters is featured in a new two types of multilayered structures of the piezoelement. By measuring the piezoelectricity response to pressure, the synergetic effects of the magnetic clusters, the doping and the electric polymerization on the piezoelectric effect were clarified. In addition, by examining the relation between the piezoelectricity and the piezoresistivity created in the MCF piezo element, we propose a hybrid piezoelement. PMID:28208625

  13. Research on Mixture Product Made of Nitrile Butadiene Rubber, Natural Rubber and Epoxy%丁腈橡胶/天然橡胶/环氧树脂复合材料共混片材制备初探

    Institute of Scientific and Technical Information of China (English)

    向丽君; 闵志刚

    2012-01-01

    通过丁腈橡胶/天然橡胶/环氧树脂的共混得到一种对钢板粘结性良好并对钢板具有一定补强作用的新产品,考察环氧树脂的用量对胶片性能的影响。环氧树脂的加入使胶片和金属的粘接性显著提高,硫化性能得到明显改善,但胶片的力学性能有一定下降,而胶片的硬度受影响不明显。%Through blending of nitrile rubber, natural rubber and epoxy, a good adhesion on steel and steel plate which has a reinforcing effect of the new products can be got. It discusses the effect of the amount of epoxy resin on the film properties. The experimental data shows that the addition of epoxy adhesive film on the metal significantly improves the adhesion. But the mechanical properties of the film declines, the hardness of the film is not great.

  14. Influence of pyrolytic carbon black and pyrolytic oil made from used tires on the curing and (dynamic mechanical properties of natural rubber (NR/styrene-butadiene rubber (SBR blends

    Directory of Open Access Journals (Sweden)

    F. Karabork

    2016-01-01

    Full Text Available Pyrolytic carbon black (CBp and pyrolytic oil (Op made from used tires were used in natural rubber (NR/styrene-butadiene rubber (SBR blends. The effects of CBp and Op on the processing properties, the mechanical properties and the dynamic mechanical properties of the NR/SBR blends were investigated and compared with a control sample that was prepared with N550 and commercial process oil. It was found that the effect of CBp on the processing properties of the NR/SBR blends was similar to that of N550. With the increase of the CBp content, the curing properties of the NR/SBR blends changed little. The reinforcing effect of CBp was inferior to that of N550. With the increase of the CBp content, the tensile strength, tear strength and modulus at 100% elongation of the NR/SBR vulcanizates decreased significantly. Dynamic mechanical properties of the NR/SBR blends were also affected and all samples comprising CBp have a higher tan δ than control sample. It is suggested that the low surface area and high ash content of CBp strongly effects all of these property changes of the NR/SBR blends. The morphology and distribution of the carbon black particles are studied using a scanning electron microscope. It was also found that with the increase of the Op content, the properties of the NR/SBR blends were strongly affected due to the high sulfur content of Op, which produced a high crosslinking density.

  15. Advances in rubber/halloysite nanotubes nanocomposites.

    Science.gov (United States)

    Jia, Zhixin; Guo, Baochun; Jia, Demin

    2014-02-01

    The research advances in rubber/halloysite nanotubes (rubber/HNTs) nanocomposites are reviewed. HNTs are environmentally-friendly natural nanomaterials, which could be used to prepare the rubber-based nanocomposites with high performance and low cost. Unmodified HNTs could be adopted to prepare the rubber/HNTs composites with improved mechanical properties, however, the rubber/HNTs nanocomposites with fine morphology and excellent properties were chiefly prepared with various modifiers by in situ mixing method. A series of rubber/HNTs nanocomposites containing several rubbers (SBR, NR, xSBR, NBR, PU) and different modifiers (ENR, RH, Si69, SA, MAA, ILs) have been investigated. The results showed that all the rubber/HNTs nanocomposites achieved strong interfacial interaction via interfacial covalent bonds, hydrogen bonds or multiple interactions, realized significantly improved dispersion of HNTs at nanoscale and exhibited excellent mechanical performances and other properties.

  16. Visual nesting system for irregular cutting-stock problem based on rubber band packing algorithm

    Directory of Open Access Journals (Sweden)

    Xiaoping Liao

    2016-05-01

    Full Text Available This article deals with the packing problem of irregular items allocated into a rectangular sheet to minimize the waste. Conventional solution is not visual during the packing process. It obtains a reasonable and relatively satisfactory solution between the nesting time and nesting solution. This article adopts a physical method that uses rubber band packing algorithm to simulate a rubber band wrapping those packing irregular items. The simulation shows a visual and fast packing process. The resultant rubber band force is applied in the packing items to translate, rotate, and slide them to make the area decrease and obtain a high packing density. An improved analogy QuickHull algorithm is presented to obtain extreme points of rubber band convex hull. An adaptive module could set a variable rubber band force and a variable time step to make a proper convergence and no intersection. A quick convex decomposition method is used to solve the problem of concave polygon. A plural vector expression approach is adopted to calculate the resultant vector of the rubber band force. Several cases are compared with the benchmark problems to prove rubber band packing algorithm performance.

  17. Antidegradation and reinforcement effects of phenyltrimethoxysilane- or N-[3-(trimethoxysilyl)propyl]aniline-modified silica particles in natural rubber composites

    Energy Technology Data Exchange (ETDEWEB)

    Tunlert, Apinya [Program in Petrochemistry and Polymer Science, Chulalongkorn University, Bangkok 10330 (Thailand); Prasassarakich, Pattarapan [Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand); Poompradub, Sirilux, E-mail: sirilux.p@chula.ac.th [Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Bangkok 10330 (Thailand); Center for Petroleum, Petrochemical and Advanced Material, Chulalongkorn University Bangkok 10330 (Thailand)

    2016-04-15

    The modification of silica particles with phenyltrimethoxysilane or N-[3-(trimethoxysilyl)propyl]aniline via a sol–gel reaction was performed in order to improve the dispersion of silica and antidegradation in natural rubber (NR). The functional groups on the modified silica surface were characterized by Fourier transform infrared spectroscopy, while the morphology was evaluated by scanning and transmission electron microscopy. The surface properties and antioxidant activity of the modified silica particles were determined by the water contact angle and 2, 2-diphenyl-1-picrylhydrazyl assay, respectively. The modified silica particles exhibited a higher hydrophobicity and a decreased interfacial adhesion energy compared with the unmodified silica particles. The modified silica particles were then incorporated into NR. The better dispersion of the modified silica particles than the unmodified ones in the NR matrix resulted in improved mechanical properties in terms of the modulus at 300% elongation (2.9 ± 0.02 MPa), hardness (52.5 ± 0.2 Shore A), abrasion resistance (241 ± 8 mm{sup 3}) and compression set (20.2 ± 0.6%). In addition, the inclusion of the modified silica particles in the NR matrix gave a high initial temperature of decomposition and retarded the ozone-induced degradation compared with the NR filled with unmodified silica particles. - Highlights: • Silica was surface modified with PhTMS or ATMS via a sol–gel reaction. • Modified silica showed a decreased interfacial adhesion energy. • Modified silica showed an enhanced free radical scavenging activity. • Modified silica improved the mechanical properties, thermal stability and ozone resistance in NR vulcanizates.

  18. Antibacterial Nanocomposites Based on Fe3O4–Ag Hybrid Nanoparticles and Natural Rubber-Polyethylene Blends

    Directory of Open Access Journals (Sweden)

    Thanh Dung Ngo

    2016-01-01

    Full Text Available For the vulcanized natural rubber (NR, incorporation of silver nanoparticles (AgNPs into the NR matrix did not exhibit the bactericidal property against Escherichia coli (E. coli. However, incorporation of AgNPs into polyethylene (PE matrix showed good antibacterial activities to both Gram-negative and Gram-positive bacteria. In the present work, NR/PE (85/15 blends have been prepared by melt blending with presence of compatibilizer in an internal mixer. To possess antibacterial property, AgNPs (5–10 nm or Fe3O4–Ag hybrid nanoparticles (FAgNPs, 8 nm/16 nm were added into PE matrix before its blending with NR component. The tensile test indicated that the presence of compatibilizer in NR/PE blend significantly enhanced the tensile strength and elongation at break (up to 35% and 38% increases, resp.. The antibacterial activity test was performed by monitoring of the bacterial lag-log growth phases with the presence of nanocomposites in the E. coli cell culture reactor. The antibacterial test showed that the presence of FAgNPs in NR/PE blend had a better antibacterial activity than that obtained with the lone AgNPs. Two similar reasons were proposed: (i the faster Ag+ release rate from the Fe3O4–Ag hybrid nanoparticles due to the electron transfer from AgNP to Fe3O4 nanoparticle and (ii the fact that the ionization of AgNPs in hybrid nanostructure might be accelerated by Fe3+ ions.

  19. Randomized, double-blind, placebo-controled clinical trial of sublingual immunotherapy in natural rubber latex allergic patients

    Directory of Open Access Journals (Sweden)

    Audicana Maria T

    2011-08-01

    Full Text Available Abstract Background Natural rubber latex allergy is a common and unsolved health problem. Since the avoidance of exposure is very difficult, immunotherapy is strongly recommended, but before its use in patients, it is essential to prove the efficacy and safety of extracts. The aim of the present randomised, double-blind, placebo-controlled clinical trial was to assess the efficacy and tolerability of latex sublingual immunotherapy in adult patients undergoing permanent latex avoidance. Methods Twenty-eight adult latex-allergic patients (5 males and 23 females, with mean age of 39 years (range 24-57 were randomized to receive a commercial latex-sublingual immunotherapy or placebo during one year, followed by another year of open, active therapy. The following outcomes were measured at baseline and at the end of first and second year of follow-up: skin prick test, gloves-use score, conjunctival challenge test, total and specific IgE, basophil activation test, and adverse reactions monitoring. Results No significant difference in any of the efficacy in vivo variables was observed between active and placebo groups at the end of the placebo-controlled phase, nor when each group was compared with their baseline values at the end of the two year-study. An improvement in the average percentage of basophils activated was observed. During the induction phase, 4 reactions in the active group and 5 in the placebo group were recorded. During the maintenance phase, two patients dropped out due to pruritus and to acute dermatitis respectively. Conclusion Further studies are needed to evaluate latex-sublingual immunotherapy, since efficacy could not be demonstrated in adult patients with avoidance of the allergen. Trial registration number ACTRN12611000543987

  20. Fabrication and investigation on field-dependent properties of natural rubber based magneto-rheological elastomer isolator

    Science.gov (United States)

    Ain Abd Wahab, Nurul; Amri Mazlan, Saiful; Ubaidillah; Kamaruddin, Shamsul; Intan Nik Ismail, Nik; Choi, Seung-Bok; Haziq Rostam Sharif, Amirul

    2016-10-01

    This study presents a laminated magnetorheological elastomer (MRE) isolator which applies to vibration control in practice. The proposed isolator is fabricated with multilayer MRE sheets associated with the natural rubber (NR) as a matrix, and steel plates. The fabricated MRE isolator is then magnetically analysed to achieve high magnetic field intensity which can produce high damping force required for effective vibration control. Subsequently, the NR-based MRE specimen is tested to identify the field-dependent rheological properties such as storage modulus with 60 weight percentage of carbonyl iron particles. It is shown from this test that the MR effect of MRE specimen is quantified to reach up to 120% at 0.8 T. Following the design stage, the electromagnetic simulation using the finite element method magnetic (FEMM) software is carried out for analysing the magnetic flux distribution in the laminated MRE isolator. The laminated MRE isolator is then examined to a series of compression for static and dynamic test under various applied currents using the dynamic fatigue machine and biaxial dynamic testing machine. It is shown that the static compression force is increased by 14.5% under strong magnetic field compared to its off-state. Meanwhile, the dynamic compression test results show that the force increase of the laminated MRE isolator is up to 16% and 7% for low and high frequency respectively. From the results presented in this work, it is demonstrated that the full-scale concept of the MRE isolator can be one of the potential candidates for vibration control applications by tunability of the dynamic stiffness.

  1. Low Leachable Container System Consisting of a Polymer-Based Syringe with Chlorinated Isoprene Isobutene Rubber Plunger Stopper.

    Science.gov (United States)

    Kiminami, Hideaki; Takeuchi, Katsuyuki; Nakamura, Koji; Abe, Yoshihiko; Lauwers, Philippe; Dierick, William; Yoshino, Keisuke; Suzuki, Shigeru

    2015-01-01

    A 36 month leachable study on water for injection in direct contact within a polymer-based prefillable syringe consisting of a cyclo olefin polymer barrel, a chlorinated isoprene isobutene rubber plunger stopper, a polymer label attached on the barrel, and a secondary packaging was conducted at 25 ± 2 °C and 60 ± 5% relative humidity. Through the various comparison studies, no difference in the leachable amounts was observed between this polymer-based prefilled syringe and a glass bottle as a blank sample reference by 36 months. No influence on the leachables study outcome was noted from the printed label and/or label adhesive or from the secondary packaging. In an additional study, no acrylic acid used as the label adhesive leachable was detected by an extended storage for 45 months at 25 ± 2 °C and 60 ± 5% relative humidity as a worst case. To obtain more details, a comparison extractable study was conducted between a cyclo olefin polymer barrel and a glass barrel. In addition, chlorinated isoprene isobutene rubber and bromo isoprene isobutene rubber were compared. As a result, no remarkable difference was found in the organic extractables for syringe barrels. On the other hand, in the case of element extractable analysis, the values for the cyclo olefin polymer barrel were lower than that for the glass barrel. For the plunger stoppers, the chlorinated isoprene isobutene rubber applied in this study was showing a lower extractable profile as compared to the bromo isoprene isobutene rubber, both for organic and element extractables. In conclusion, the proposed polymer-based prefillable syringe system has great potential and represents a novel alternative that can achieve very low level extractable profiles and can bring additional value to the highly sensitive biotech drug market. A 36 month leachable study on water for injection in direct contact within a cyclo olefin polymer barrel and chlorinated isoprene isobutene rubber plunger stopper that has a

  2. Image Processing Based Girth Monitoring and Recording System for Rubber Plantations

    Directory of Open Access Journals (Sweden)

    Chathura Thilakarathne

    2015-02-01

    Full Text Available Measuring the girth and continuous monitoring of the increase in girth is one of the most important processes in rubber plantations since identification of girth deficiencies would enable planters to take corrective actions to ensure a good yield from the plantation. This research paper presents an image processing based girth measurement & recording system that can replace existing manual process in an efficient and economical manner. The system uses a digital image of the tree which uses the current number drawn on the tree to identify the tree number & its width. The image is threshold first & then filtered out using several filtering criterion to identify possible candidates for numbers. Identified blobs are then fed to the Tesseract OCR for number recognition. Threshold image is then filtered again with different criterion to segment out the black strip drawn on the tree which is then used to calculate the width of the tree using calibration parameters. Once the tree number is identified & width is calculated the girth the measured girth of the tree is stored in the data base under the identified tree number. The results obtained from the system indicated significant improvement in efficiency & economy for main plantations. As future developments we are proposing a standard commercial system for girth measurement using standardized 2D Bar Codes as tree identifiers

  3. Flexible Conformal Metal Rubber Sensors for Entry/Landing Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NanoSonic proposes to design and develop light-weight, low-modulus, and durable Metal Rubber sensors for aeroelastic analysis of inflatable/flexible entry, descent,...

  4. Rubber composites cured with sulphur and peroxide and incorporated with strontium ferrite

    Indian Academy of Sciences (India)

    JÁN KRUŽELÁK; RASTISLAV DOSOUDIL; RICHARD SÝKORA; IVAN HUDEC

    2017-02-01

    In the present work, rubber magnetic composites were prepared by incorporation of strontium ferrite into rubber matrices based on natural rubber (NR) and acrylonitrile–butadiene rubber (NBR). Sulphur, peroxide and mixed sulphur/peroxide curing systems were introduced in cross-linking of rubber matrices. The aim was to investigate the influence of curing system composition on physical–mechanical, thermo-physical and magnetic properties of prepared rubber composites and the curing process. Then, the determination of cross-link density and the structure of cross-links were under consideration. The achieved results showed that all investigated parameters were changed depending on the composition of curing system, but also on the type of rubber matrix. While the tensile strength of composites based on NR increased with increasing amount of sulphur in mixed curing systems, in case of composites based on NBR, the highest value of tensile strength reached the value of the sample cured with equivalent ratio of sulphur and peroxide. On the other hand, thermo-physical and magnetic characteristics were found not to be dependent on the curing system composition. The results revealed that not only the composition of curingsystem, but also the type of rubber matrix plays an important role when preparing the final materials.

  5. Deproteinized natural rubber film forming polymeric solutions for nicotine transdermal delivery.

    Science.gov (United States)

    Pichayakorn, Wiwat; Suksaeree, Jirapornchai; Boonme, Prapaporn; Amnuaikit, Thanaporn; Taweepreda, Wirach; Ritthidej, Garnpimol C

    2013-01-01

    Film forming polymeric solutions were prepared from DNRL blended with MC, PVA, or SAG, together with dibutylphthalate or glycerine used as plasticizers. These formulations were easily prepared by simple mixing. In a preliminary step, in situ films were prepared by solvent evaporation in a Petri-dish. Their mechanical and physicochemical properties were determined. The in vitro release and skin permeation of nicotine dissolved in these blended polymers were investigated by a modified Franz diffusion cell. The formulations had a white milky appearance, and were homogeneous and smooth in texture. Their pH was suitable for usage in skin contact. The mechanical property of in situ films depended on the ingredients but all compatible films were in an amorphous phase. The DNRL/PVA was shown to be the most suitable mixture to form completed films. The in vitro release and skin permeation studies demonstrated a biphasic release that provided an initial rapid release followed by a constant release rate that fitted the Higuchi's model. Nicotine loaded DNRL/PVA series were selected for the stability test for 3 months. These formulations needed to be kept at 4°C in tight fitting containers. In conclusion, film forming polymeric solutions could be developed for transdermal nicotine delivery systems.

  6. 丝胶接枝物改性天然乳胶的研究%Research of using silk sericin to modify natural rubber latex

    Institute of Scientific and Technical Information of China (English)

    孙金煜; 田晓慧; 元以中; 龚淑婷; 冯佼姣; 刘虎邱

    2011-01-01

    利用丝胶优良的抗氧化性和亲肤性等特点,将丝胶包覆在天然乳胶粒表面,从而隔绝了天然乳胶膜与皮肤的直接接触,改善天然乳胶制品对皮肤的过敏性反应,使其不仅具有耐氧化性,而且与皮肤接触后可有效防止肌肤干燥,抑制肌肤黑色素生成等.同时将水性聚氨酯通过先接枝后杂凝聚的方法,在不改变乳胶断裂伸长率的情况下,提高拉伸强度,实现了对天然乳胶过敏性和机械性能的双重改善.%By the use of excellent oxidation resistance and skin friendly of silk sericin, silk sericin coats the surface of natural rubber latex particles which could cut off the direct contact with the skin and improve allergy. It makes natural latex rubber could not only resist oxidation but also effectively avoid skin drying and prevent melanin' s generating. After heterocoagulating with aqueous polyure-thane grafting with silk sericin, natural rubber latex membrane could improve fracture strength without reducing its breaking elongation,realize the improvement of its anaphylaxis and mechanical properties.

  7. Cropping system diversification for food production in Mindanao rubber plantations: a rice cultivar mixture and rice intercropped with mungbean.

    Science.gov (United States)

    Hondrade, Rosa Fe; Hondrade, Edwin; Zheng, Lianqing; Elazegui, Francisco; Duque, Jo-Anne Lynne Joy E; Mundt, Christopher C; Vera Cruz, Casiana M; Garrett, Karen A

    2017-01-01

    Including food production in non-food systems, such as rubber plantations and biofuel or bioenergy crops, may contribute to household food security. We evaluated the potential for planting rice, mungbean, rice cultivar mixtures, and rice intercropped with mungbean in young rubber plantations in experiments in the Arakan Valley of Mindanao in the Philippines. Rice mixtures consisted of two- or three-row strips of cultivar Dinorado, a cultivar with higher value but lower yield, and high-yielding cultivar UPL Ri-5. Rice and mungbean intercropping treatments consisted of different combinations of two- or three-row strips of rice and mungbean. We used generalized linear mixed models to evaluate the yield of each crop alone and in the mixture or intercropping treatments. We also evaluated a land equivalent ratio for yield, along with weed biomass (where Ageratum conyzoides was particularly abundant), the severity of disease caused by Magnaporthe oryzae and Cochliobolus miyabeanus, and rice bug (Leptocorisa acuta) abundance. We analyzed the yield ranking of each cropping system across site-year combinations to determine mean relative performance and yield stability. When weighted by their relative economic value, UPL Ri-5 had the highest mean performance, but with decreasing performance in low-yielding environments. A rice and mungbean intercropping system had the second highest performance, tied with high-value Dinorado but without decreasing relative performance in low-yielding environments. Rice and mungbean intercropped with rubber have been adopted by farmers in the Arakan Valley.

  8. Cropping system diversification for food production in Mindanao rubber plantations: a rice cultivar mixture and rice intercropped with mungbean

    Directory of Open Access Journals (Sweden)

    Rosa Fe Hondrade

    2017-02-01

    Full Text Available Including food production in non-food systems, such as rubber plantations and biofuel or bioenergy crops, may contribute to household food security. We evaluated the potential for planting rice, mungbean, rice cultivar mixtures, and rice intercropped with mungbean in young rubber plantations in experiments in the Arakan Valley of Mindanao in the Philippines. Rice mixtures consisted of two- or three-row strips of cultivar Dinorado, a cultivar with higher value but lower yield, and high-yielding cultivar UPL Ri-5. Rice and mungbean intercropping treatments consisted of different combinations of two- or three-row strips of rice and mungbean. We used generalized linear mixed models to evaluate the yield of each crop alone and in the mixture or intercropping treatments. We also evaluated a land equivalent ratio for yield, along with weed biomass (where Ageratum conyzoides was particularly abundant, the severity of disease caused by Magnaporthe oryzae and Cochliobolus miyabeanus, and rice bug (Leptocorisa acuta abundance. We analyzed the yield ranking of each cropping system across site-year combinations to determine mean relative performance and yield stability. When weighted by their relative economic value, UPL Ri-5 had the highest mean performance, but with decreasing performance in low-yielding environments. A rice and mungbean intercropping system had the second highest performance, tied with high-value Dinorado but without decreasing relative performance in low-yielding environments. Rice and mungbean intercropped with rubber have been adopted by farmers in the Arakan Valley.

  9. Cropping system diversification for food production in Mindanao rubber plantations: a rice cultivar mixture and rice intercropped with mungbean

    Science.gov (United States)

    Elazegui, Francisco; Duque, Jo-Anne Lynne Joy E.; Mundt, Christopher C.; Vera Cruz, Casiana M.

    2017-01-01

    Including food production in non-food systems, such as rubber plantations and biofuel or bioenergy crops, may contribute to household food security. We evaluated the potential for planting rice, mungbean, rice cultivar mixtures, and rice intercropped with mungbean in young rubber plantations in experiments in the Arakan Valley of Mindanao in the Philippines. Rice mixtures consisted of two- or three-row strips of cultivar Dinorado, a cultivar with higher value but lower yield, and high-yielding cultivar UPL Ri-5. Rice and mungbean intercropping treatments consisted of different combinations of two- or three-row strips of rice and mungbean. We used generalized linear mixed models to evaluate the yield of each crop alone and in the mixture or intercropping treatments. We also evaluated a land equivalent ratio for yield, along with weed biomass (where Ageratum conyzoides was particularly abundant), the severity of disease caused by Magnaporthe oryzae and Cochliobolus miyabeanus, and rice bug (Leptocorisa acuta) abundance. We analyzed the yield ranking of each cropping system across site-year combinations to determine mean relative performance and yield stability. When weighted by their relative economic value, UPL Ri-5 had the highest mean performance, but with decreasing performance in low-yielding environments. A rice and mungbean intercropping system had the second highest performance, tied with high-value Dinorado but without decreasing relative performance in low-yielding environments. Rice and mungbean intercropped with rubber have been adopted by farmers in the Arakan Valley. PMID:28194318

  10. Bioremediation of crude oil-polluted soil--effect of poultry droppings and natural rubber processing sludge application on biodegradation of petroleum hydrocarbons.

    Science.gov (United States)

    Okieimen, C O; Okieimen, F E

    2005-01-01

    Laboratory bioremediation experiments were carried out on crude oil-polluted soil samples by applying various amounts of poultry droppings and natural rubber processing sludge as nutrient supplements at 29 degrees and using slurry-phase and solid-phase biodegradation techniques. Changes in the total hydrocarbon content of the soil were determined using a spectrophotometric technique as a function of time. It was found that the extent of crude oil degradation in untreated soil samples was markedly lower (by up to 100%) than in the soil samples treated with nutrient supplements. Hydrocarbon degradation efficiency was higher in the slurry-phase than in the soil-phase technique.

  11. Synthesis of tetraaza bromide macrocyclic and studies of its effect on poly(methyl methacrylate) grafted natural rubber (MG49) - lithium tertrafluoroborate (LiBF4) films

    Science.gov (United States)

    Mariam, Siti Nor; Yamin, Bohari M.; Ahmad, Azizan

    2013-11-01

    Good Poly(Methyl Methacrylate) Grafted natural Rubber (MG49) films with homogeneous and smooth surface were obtained in the presence of Lithium Tertrafluoroborate (LiBF4) and 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradeca-7,14-dienium bromide, (Me6N4H4)Br2 as dopants. The conductivity was found to be 3.63×10-6 S/cm an increase by seven fold compare to the undoped MG49.

  12. 白炭黑用量对氯丁橡胶/天然橡胶共混物性能的影响%Influence of silica loading on performance of chloroprene rubber/natural rubber blends

    Institute of Scientific and Technical Information of China (English)

    武卫莉

    2007-01-01

    研究了不同用量的沉淀法白炭黑填充质量比75/25的氯丁橡胶/天然橡胶共混物的物理机械性能、耐热老化性能和耐油性能,并用扫描电镜研究了共混物的结构.结果显示,白炭黑的加入改善了共混硫化物的拉伸强度、100%定伸应力和邵尔A硬度.压缩永久变形减小,黏度增大,从而导致在形变的过程中天然橡胶分散相占有率相对减少.相关性能也证明随着白炭黑用量的增加,硫化胶的耐热和耐油性能显著提高.%Blends of 75/25 ( mass ratio) chloroprene rubber ( CR )/natural rubber ( NR ) filled with various loadings of precipitated silica were prepared, and their mechanical properties as well as the resistances to thermal aging and oil were studied. The blend morphology was also studied by scanning electron microscope. The results show that the tensile strength, modulus and Shore A hardness of the blend vulcanizates are found to be improved noticeably with increasing silica loading, the compression set is impaired with increasing silica loading. In terms of phase morphology, the size of NR dispersed phase decreases with increasing silica loading due to the increase of compound viscosity. The results also demonstrate that both thermal aging resistance and oil resistance of the blend vulcanizates, as represented by the relative properties, are remarkably enhanced with increasing silica loading.

  13. 中国橡胶种植生命周期评价研究%Assessment of natural rubber plantation life cycle in China

    Institute of Scientific and Technical Information of China (English)

    徐杰峰; 王小文; 王乐力; 王伯铎; 林积泉; 宋超山

    2011-01-01

    Using China's natural rubber plantation as a case study, this paper classified natural rubber plantation life cycle into four stages-raw material, agrochemical production, natural rubber cultivation and transportation stages. The life-cycle assessment (LCA) method was used to evaluate potential environmental impacts of tapping 1.00 kg dry rubber under identified potential impacts, including global warming potential (GWP), acidification potential (AP), eutrophication potential (EP), photochemical ozone creation potential (POCP), human toxicity potential (HTP) and abiotic depletion potential (ADP). This inventory analysis showed that the order of potential impacts of China's natural rubber plantation was as follows: AP > EP > GWP > HTP > POCP > ADP. The respective impact indices were 1 .76× 10-12, 4.31×10-13, 1.37×10-13, 1.96×10-15, 9.69×10-18 and 4.88×10-19, with an average impact index of 4.32× l0-13. Reduced chemical fertilizer utilization and enhanced fertilization efficiency were critical for mitigating the impact of rubber plantation on the environment. This could be achieved via effective reduced energy consumption, fertilizer production emissions, and soil fertilizer loss.%应用生命周期评价方法,以我国橡胶种植为例,把橡胶种植生命周期划分为原料、农资化、橡胶种植、运输等4个阶段,考虑了全球变暖(GWP)、环境酸化(AP)、水体富营养化(EP)、光化学烟雾形成(POCP)、人体健康损害(HTP)、不可更新资源消耗(ADP)等 6类潜在影响,对得到1 kg橡胶(以干胶计)的潜在环境影响进行了分析评价.结果表明,我国橡胶种植的各类影响排序为AP>EP>GWP>HTP>POCP>ADP,其影响指数分别为1.76E-12、4.31E-13、1.37E-13、1.96E-15、9.69E-18、4.88E-19,单一环境影响指数为4.32E-13.减少化肥施用量、提高施肥有效率是控制整个橡胶种植潜在影响大小的关键,其在有效降低上游直接生产能耗及其相应排放和下游损失

  14. Preparation and Characterization of Marble Powder/Natural Rubber Composites%大理石粉/NR复合材料的制备与性能研究

    Institute of Scientific and Technical Information of China (English)

    王继虎; 陈有双; 唐忠锋; 陶冶

    2011-01-01

    将石材加工过程中产生的废弃大理石粉碎,采用硬脂酸偶联剂对大理石粉进行改性.将改性后大理石粉混炼到NR中制备复合材料,通过不同测试手段研究材料的性能变化.结果表明,球磨后大理石粉的平均粒径为24.18μm.采用硬脂酸改性后大理石粉添加量为10%时性能最佳,拉伸强度达到20.11MPa.与大理石/NR及纯橡胶材料相比,改性后大理石粉/NR复合材料的耐热性能明显提高.活化后大理石粉作为橡胶填料,可替代炭黑降低橡胶制品生产成本,同时有利于环保.%Marble powder was modified by stearic acid coupling agent after marble scraps were grinded. Natural rubber/marble powder composites were prepared by direct blending technology. The results showed that the average particle size of marble powder was 24.18μm. The best mechanical properties of composites were obtained after modified marble powder content were 10 percent in the natural rubber, and the tensile strength was 20.11 Mpa. The heat resistance of composites was higher than unmodified marble powder/NR composites. Activated marble powder has excellent reinforcement effect and ideal processing characteristics, and can replace carbon black in rubber to achieve its application.

  15. A Simulation Model Estimates of the Intercropping Advantage of an Immature-Rubber, Banana and Pineapple System

    Directory of Open Access Journals (Sweden)

    Mohamadu B. Jalloh

    2009-01-01

    Full Text Available Problem statement: Intercropping has been shown to have many advantages but it is fallacious to conclude it is always a better cropping system. Little is known about a new double-hedgerow intercropping of rubber, banana and pineapple in relation to its effects on growth and yield of the component crops when compared to their monocrops. Simulation modeling offers a cheaper and faster alternative to explore cropping scenarios and estimate their productivity under a wide range of management and environmental conditions. This simulation study was therefore undertaken to evaluate the growth and yield of immature rubber, banana and pineapple intercrop and monocrop scenarios with the aid of an intercrop simulation model named SURHIS, as well as estimating the intercropping advantage. Approach: A FORTRAN computer model (SURHIS that simulated the daily light interception and utilization by immature-rubber, banana and pineapple intercropping system was used to simulate intercrop and monocrop scenarios to estimate potential Dry Matter Yield (DMY for all crops as well as fruit yields for banana and pineapple. The results of the model were tested for accuracy by comparing actual field experimental results with the aid of Mean Deviation (MD and Mean Absolute Error (MAE statistical analyses. Intercropping advantage was assessed using the Land Equivalent Ratio (LER analysis. Results: The model was representative or predicted DMY of the crops with sufficient accuracy. The LER analysis showed that the intercropping system had a dry matter yield productivity advantage of 81% more than monocrops of the component crops. The results also showed that the higher the Plant Population Density (PPD, the greater is the dry matter yield. It was also shown that banana and pineapple had no deleterious effect on the growth of rubber. Fruit weight per plant of banana and pineapple was reduced with increase in PPD for the monocrops. Measured average fresh fruit bunch weight for

  16. In-depth proteome analysis of the rubber particle of Hevea brasiliensis (para rubber tree).

    Science.gov (United States)

    Dai, Longjun; Kang, Guijuan; Li, Yu; Nie, Zhiyi; Duan, Cuifang; Zeng, Rizhong

    2013-05-01

    The rubber particle is a special organelle in which natural rubber is synthesised and stored in the laticifers of Hevea brasiliensis. To better understand the biological functions of rubber particles and to identify the candidate rubber biosynthesis-related proteins, a comprehensive proteome analysis was performed on H. brasiliensis rubber particles using shotgun tandem mass spectrometry profiling approaches-resulting in a thorough report on the rubber particle proteins. A total of 186 rubber particle proteins were identified, with a range in relative molecular mass of 3.9-194.2 kDa and in isoelectric point values of 4.0-11.2. The rubber particle proteins were analysed for gene ontology and could be categorised into eight major groups according to their functions: including rubber biosynthesis, stress- or defence-related responses, protein processing and folding, signal transduction and cellular transport. In addition to well-known rubber biosynthesis-related proteins such as rubber elongation factor (REF), small rubber particle protein (SRPP) and cis-prenyl transferase (CPT), many proteins were firstly identified to be on the rubber particles, including cyclophilin, phospholipase D, cytochrome P450, small GTP-binding protein, clathrin, eukaryotic translation initiation factor, annexin, ABC transporter, translationally controlled tumour protein, ubiquitin-conjugating enzymes, and several homologues of REF, SRPP and CPT. A procedure of multiple reaction monitoring was established for further protein validation. This comprehensive proteome data of rubber particles would facilitate investigation into molecular mechanisms of biogenesis, self-homeostasis and rubber biosynthesis of the rubber particle, and might serve as valuable biomarkers in molecular breeding studies of H. brasiliensis and other alternative rubber-producing species.

  17. Robotically enhanced rubber hand illusion.

    Science.gov (United States)

    Arata, Jumpei; Hattori, Masashi; Ichikawa, Shohei; Sakaguchi, Masamichi

    2014-01-01

    The rubber hand illusion is a well-known multisensory illusion. In brief, watching a rubber hand being stroked by a paintbrush while one's own unseen hand is synchronously stroked causes the rubber hand to be attributed to one's own body and to "feel like it's my hand." The rubber hand illusion is thought to be triggered by the synchronized tactile stimulation of both the subject's hand and the fake hand. To extend the conventional rubber hand illusion, we introduce robotic technology in the form of a master-slave telemanipulator. The developed one degree-of-freedom master-slave system consists of an exoskeleton master equipped with an optical encoder that is worn on the subject's index finger and a motor-actuated index finger on the rubber hand, which allows the subject to perform unilateral telemanipulation. The moving rubber hand illusion has been studied by several researchers in the past with mechanically connected rigs between the subject's body and the fake limb. The robotic instruments let us investigate the moving rubber hand illusion with less constraints, thus behaving closer to the classic rubber hand illusion. In addition, the temporal delay between the body and the fake limb can be precisely manipulated. The experimental results revealed that the robotic instruments significantly enhance the rubber hand illusion. The time delay is significantly correlated with the effect of the multisensory illusion, and the effect significantly decreased at time delays over 100 ms. These findings can potentially contribute to the investigations of neural mechanisms in the field of neuroscience and of master-slave systems in the field of robotics.

  18. Nature's Book Keeping System

    CERN Document Server

    Hooft, Gerard t

    2016-01-01

    Establishing how one should describe and study natures fundamental degrees of freedom is a notoriously difficult problem. It is tempting to assume that the number of bits (or qubits) needed in a given Planckian 3-volume, or perhaps 2-volume, is a fixed finite number, but this ansatz does not make the problem much easier. We come not even close to solving this problem, but we propose various ingredients in phrasing the questions, possibilities and limitations that may serve as starting points.

  19. Effects of Cassava Starch and Natural Rubber as Binders on the Flexural and Water Absorption Properties of Recycled Paper Pulp Based Composites

    Directory of Open Access Journals (Sweden)

    Oladele Isiaka Oluwole

    2015-10-01

    Full Text Available Responsiveness was given to the effects of cassava starch and natural rubber as binders on the flexural strength and the water absorptivity properties of the developed rattan particulate reinforced paper pulp based composites. Paper pulp was produced by chopping waste papers into smaller pieces and soaked in boiled water after which it was stirred thoroughly to form paper pulp. Rattan particulate was produced by hammering, chopping, pounding and milling of rattan canes followed by sieving into a particle size of 437 µ. Varying mass of paper from 300-400 g and particulate rattan in treated and untreated form of 2-8 g were mixed and bonded with natural rubber and cassava starch, respectively for the various samples developed. The mixtures were thoroughly mixed to produce homogenous pastes and poured into 150 x 50 x 30 mm detachable mould and compacted for 5 minutes using a laboratory compaction machine maintained at 20 KN. The developed composites were allowed to cure at room temperature for 27 days after which flexural and water absorptivity tests were carried out on the samples. It was noticed that the composite samples ST4 and S5 containing cassava starch happen to be the best in terms of flexural strength while NR2 gave the best water- repellent outcome.

  20. Research on Properties of Natural Rubber of Different Strains%不同品系天然橡胶性能的研究

    Institute of Scientific and Technical Information of China (English)

    王开典; 杨春亮; 吕明哲; 曾宗强; 梁志雄; 黄茂芳

    2013-01-01

    [Objective] To study properties of natural rubber of different strains.[Method] The physiological parameters of 7 strains of natural rubber fresh latex were observed.And then centrifuge enrichment to compare the performance of concentrated latex from each district and each lines,and made research on mechanical properties of vulcanized rubber latex concentrate.[Result] The results showed that the content of sucrose was the highest in strain Yunyan77-4,the content of thioalcohol was the highest in strain Reyan 7-33-97,the content of total dry solid containing was the highest in strain Zhanshi 93-114,the number of volatile fatty acid in concentrated latex was the highest in strain RRIM600,the strain Reken525 had the best physical and mechanical properties in these strains.[Conclusion] The study can provide reference for selecting high yield and high quality rubber strain.%[目的]研究不同品系天然橡胶的性能.[方法]观察7个品系天然橡胶的新鲜胶乳的生理参数,将其离心浓缩后比较各个地区品系浓缩胶乳的性能,并且对浓缩胶乳硫化胶膜的物理机械性能进行研究.[结果]试验表明,云研774的蔗糖含量最高,热研7-33-的硫醇含量最高,湛试93-114的总固干含最高,RRIM600浓缩胶乳的挥发脂肪酸值最高,热垦525胶膜的物理机械性能最好.[结论]研究可为橡胶栽培种植和产品性能需求选育高产、优质、优良的橡胶品系提供参考.

  1. Superheated rubber for cold storage

    Energy Technology Data Exchange (ETDEWEB)

    Katzenberg, Frank; Heuwers, Benjamin; Tiller, Joerg Christian [Biomaterials and Polymer Science, Department of Biochemical and Chemical Engineering, TU Dortmund, D-44221 Dortmund (Germany)

    2011-04-26

    Highly stretched rubber cools down upon relaxation. A natural rubber material that stores high elongations up to 1000% strain upon strain-induced crystallization at room temperature is reported. The strain recovered and, with this, the stored ''cold'' is released only by a thermal or athermal trigger. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  2. Amino acid modifiers in guayule rubber compounds

    Science.gov (United States)

    Tire producers are increasingly interested in biobased materials, including rubber but also as compounding chemicals. An alternative natural rubber for tire use is produced by guayule, a woody desert shrub native to North America. Alternative compounding chemicals include naturally-occurring amino a...

  3. Characteristics and dynamic response analysis of 3-D component base isolation system using multi-layer-rubber-bearings and coil springs

    Energy Technology Data Exchange (ETDEWEB)

    Tsutsumi, Hideaki; Yamada, Hiroyuki; Ebisawa, Katsumi; Shibata, Katsuyuki [Seismic Emergency Information System Research Team, Tokai Research Establishment, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan)

    2000-07-01

    Introduction of the base isolation technique into the seismic design of nuclear power plant components as well as buildings has been expected as one of effective countermeasure to reduce the seismic force applied to components. A research program of the base isolation of nuclear components has been carried out at Japan Atomic Energy Research Institute(JAERI) since 1991. A methodology and a computer code (EBISA: Equipment Base Isolation System Analysis) for evaluating the failure frequency of the nuclear component with the base isolation were developed. In addition, a test program, which is concerned with the above development, i.e., improvement of failure frequency analysis models in the code has been conducted since 1996 to investigate the dynamic behavior and to verify the effectiveness of component base isolation systems. Two kinds of base isolation test systems with different characteristic were fabricated and static and dynamic characteristics were measured by static loading and free vibration tests. One which consists of ball bearings and air springs was installed on the test bed to observe the dynamic response under natural earthquake motion. The effect of base isolation system has been observed under several earthquakes. Another system which consists of multi-layer-rubber-bearings and coil springs has been investigated three-dimensional dynamic behavior and effect of base isolation against various large earthquake motions by shaking table test. This report describes the design specification of the base isolation system which consists of multi-layer-rubber-bearings and coil springs, static and dynamic characteristics, analysis model based on the characteristics, results of shaking table test and the dynamic response analysis (author)

  4. Through the Technology Lens: The Expansion of Rubber and its Implications in Montane Mainland Southeast Asia

    Directory of Open Access Journals (Sweden)

    Jefferson Fox

    2014-01-01

    Full Text Available Natural latex from the rubber tree (Hevea brasiliensis is a hot commodity, with consumption increasing worldwide at an average rate of 5.8% per year since 1900. The vast majority of the world′s rubber supply has historically come from the wet-humid tropics of Southeast Asia, but researchers in China have successfully developed new hybrids that grow well in areas with cooler temperatures and a distinct dry season. Today, investors are promoting rubber plantations in non-traditional rubber growing areas of Laos, Cambodia, Myanmar, northeast Thailand, and northwest Vietnam. By critically assessing the impacts of this expansion of rubber and clarifying the relationship between tools and technologies, the paper suggests that the widespread adoption of rubber as a technology leads to loss of natural and agricultural biodiversity; greater use of surface and groundwater supplies; increased use of pesticides, fertilisers, and other chemicals; higher exposure to market booms and busts for smallholders and investors; and for some farmers, the loss of their land to industrial plantations on which they may become labourers. The paper argues that if state authorities recognise the double-edged nature of rubber as a technology, they can act to try to limit its damaging effects through polices that recognise secure tenure and encourage small-scale, diversified agroforestry systems.

  5. Chemistry of rubber processing and disposal.

    Science.gov (United States)

    Bebb, R L

    1976-10-01

    The major chemical changes during the processing of rubber occur with the breakdown in mastication and during vulcanization of the molded tire. There is little chemical change during the compounding, calendering, extrusion, and molding steps. Reclaiming is the process of converting scrap rubber into an unsaturated, processible product that can be vulcanized with sulfur. Pyrolysis of scrap rubber yields a complex mixture of liquids, gas, and residue in varying ratios dependent on the nature of the scrap and the conditions of pyrolysis.

  6. Supertoughened Biobased Poly(lactic acid)-Epoxidized Natural Rubber Thermoplastic Vulcanizates: Fabrication, Co-continuous Phase Structure, Interfacial in Situ Compatibilization, and Toughening Mechanism.

    Science.gov (United States)

    Wang, Youhong; Chen, Kunling; Xu, Chuanhui; Chen, Yukun

    2015-09-10

    In the presence of dicumyl peroxide (DCP), biobased thermoplastic vulcanizates (TPVs) composed of poly(lactic acid) (PLA) and epoxidized natural rubber (ENR) were prepared through dynamic vulcanization. Interfacial in situ compatibilization between PLA and ENR phases was confirmed by Fourier transform infrared spectroscopy (FT-IR). A novel "sea-sea" co-continuous phase in the PLA/ENR TPVs was observed through scanning electron microscopy (SEM) and differed from the typical "sea-island" morphology that cross-linked rubber particles dispersed in plastic matrix. A sharp, brittle-ductile transition occurred with 40 wt % of ENR, showing a significantly improved impact strength of 47 kJ/m(2), nearly 15 times that of the neat PLA and 2.6 times that of the simple blend with the same PLA/ENR ratio. Gel permeation chromatography (GPC) and dynamic mechanical analysis (DMA) results suggested that a certain amount of DCP was consumed in the PLA phase, causing a slight cross-linking or branching of PLA molecules. the effects of various DCP contents on the impact property were investigated. The toughening mechanism under impact testing was researched, and the influence factors for toughening were discussed.

  7. FATIGUE LIFE, MORPHOLOGICAL STUDIES, AND THERMAL AGING OF RATTAN POWDER-FILLED NATURAL RUBBER COMPOSITES AS A FUNCTION OF FILLER LOADING AND A SILANE COUPLING AGENT

    Directory of Open Access Journals (Sweden)

    Hanafi Ismail,

    2012-01-01

    Full Text Available Fatigue life, morphological studies, and thermal aging properties of rattan powder-filled natural rubber (NR composites were investigated as a function of filler loading and a silane coupling agent. NR composites were prepared by the incorporation of rattan powder in the range of 0 to 30 phr into a NR matrix with a laboratory size two roll mill. Thermal aging was carried out for 7 and 14 days at a temperature of 70 °C, and tensile testing was performed in order to determine the aging properties. The results indicated that the fatigue life of rattan powder-filled NR composites decreased with increasing rattan powder loading. Tensile strength and elongation at break decreased whilst tensile modulus, stress at 100% elongation (M100, and stress at 300% elongation (M300 increased after aging. Nevertheless, the addition of the silane coupling agent improved both fatigue life and the aging properties of NR composites due to better adhesion between the rubber matrix and the rattan filler which was confirmed by FTIR studies of composites and SEM studies of fatigue fractured surfaces.

  8. Effect of Organo-Modified Nanoclay on the Thermal and Bulk Structural Properties of Poly(3-hydroxybutyrate-Epoxidized Natural Rubber Blends: Formation of Multi-Components Biobased Nanohybrids

    Directory of Open Access Journals (Sweden)

    Ali Salehabadi

    2014-06-01

    Full Text Available Multi-component nanohybrids comprising of organo-modified montmorillonite (MMT and immiscible biopolymer blends of poly(3-hydroxybutyrate (PHB and epoxidized natural rubber (ENR-50 were prepared by solvent casting technique. The one and three dimensional morphology of PHB/ENR-50/MMT systems were studied using Polarizing Optical Microscopy (POM and Scanning Electron Microscopy (SEM. Differential scanning calorimetry (DSC technique was used to evaluate the thermal properties of the nanohybrids. The melting temperature (Tm and enthalpy of melting (ΔHm of PHB decrease with respect to the increase in ENR-50 as well as MMT content. The non-isothermal decomposition of the nanohybrids was studied using thermogravimetric (TG-DTG analysis. FTIR-ATR spectra supported ring opening of the epoxide group via reaction with carboxyl group of PHB and amines of organic modifier. The reaction mechanism towards the formation of the nanohybrids is proposed.

  9. Properties of natural rubber/cis-1,4-polybutadiene rubber blends reinforced by epoxy resin%环氧树脂增强天然橡胶/顺丁橡胶并用胶的性能

    Institute of Scientific and Technical Information of China (English)

    叶林忠

    2012-01-01

    The mixture of epoxy resin ( EP) with low relative molecular mass and curing agent was used as a reinforcement precursor, and the mechanical properties of natural rubber (NR) , cis-1,4-poly-butadiene rubber ( BR) and NR/BR blends reinforced by the mixture were compared, and the influences of EP content on the properties of NR/BR blends and NR/BR blends filled with carbon black were investigated. The morphological structure of BR, NR and their blends reinforced with EP were characterized by scanning electron microscopy. The results showed that adding EP could improve the me- chanical properties of NR, BR and NR/BR blends, and NR/BR blends had the largest improvement in tensile strength. The all-round properties of NR/BR blends were the best when 24 phr of EP was added. Furthermore, adding EP could also improve the mechanical properties of NR/BR blends filled with carbon black, but not greatly. EP exhibited regular spheres with diameters of 1. 0 -2. 5 μm in the matrix of NR/BR blends.%采用低相对分子质量的液体环氧树脂(EP)与固化剂混合作为增强体的前驱体,比较了其填充天然橡胶(NR)、顺丁橡胶(BR)及两者并用胶的物理机械性能,考察了EP用量对并用胶及炭黑增强并用胶物理机械性能的影响,并通过扫描电子显微镜表征了填充后的NR、BR及并用胶的微观相态结构.结果表明,EP的加入均可提高NR、BR、NR/BR并用胶的物理机械性能,其中并用胶的拉伸强度提高幅度最大;当EP用量约为24份时,NR/BR并用胶的综合性能最佳;EP可以提高炭黑增强NR/BR并用胶的物理机械性能,但提高幅度不大;EP在NR/BR并用胶中呈现规整的圆球形状,直径为1.0~2.5μm.

  10. Relaxation phenomena in rubber/layered silicate nanocomposites

    Directory of Open Access Journals (Sweden)

    2007-12-01

    Full Text Available Broadband Dielectric Spectroscopy (BDS is employed in order to investigate relaxation phenomena occurring in natural rubber (NR, polyurethane rubber (PUR and PUR/NR blend based nanocomposites, reinforced by 10 parts per hundred (phr Layered Silicates (LS. Nanocomposites and matrices were examined under identical conditions in a wide frequency (10–1 to 106 Hz and temperature (–100 to 50°C range. Experimental data are analyzed in terms of electric modulus formalism. The recorded relaxation phenomena include contributions from both the polymer matrices and the nanofiller. Natural rubber is a non-polar material and its performance is only slightly affected by the presence of layered silicates. Polyurethane rubber exhibits four distinct relaxation processes attributed, with ascending relaxation rate, to Interfacial Polarization (IP, glass/rubber transition (α-mode, local motions of polar side groups and small segments of the polymer chain (β, γ-mode. The same processes have been detected in all systems containing PUR. IP is present in all nanocomposites being the slowest recorded process. Finally, pronounced interfacial relaxation phenomena, occurring in the PUR+10 phr LS spectra, are attributed to nanoscale effects of intercalation and exfoliation.

  11. 硅烷接枝温水交联天然橡胶的研究%Study on Natural Rubber Grafted by Silane and Crosslinking in Hot Water

    Institute of Scientific and Technical Information of China (English)

    段景宽; 蒋岚; 范常秀; 陈宗宗; 王林峰; 邵双喜; 刘柏平

    2012-01-01

    Using benzoyl peroxide (BPO) as an initiator, vinyl silane was grafted onto nature rubber via melt-blending forming NR-g-silane, which could be further treated via hot water crosslinking. The grafted rubbers were characterized using FTIR and SEM. Effects of contents of silane and BPO, grafting and crosslinking conditions (time and temperature) on gel content of crosslinked NR-g-silane were studied in this article. Relationship between gel content and mechanical property of the samples was also explored. With increasing contents of silane and BPO, blending time and temperature, crosslinking time and temperature, and gel content of crosslinked NR-g-silane increased monotonously. With increasing gel content, an obvious improvement in mechanical property was observed. Compared with nature rubber, tensile strength and elongation at break of crosslinked NR-g-silane (80 wt % gel) were improved by 30 % and 8. 5 times, respectively.%以多功能乙烯基硅烷为接枝单体,过氧化苯甲酰为引发剂,通过熔融混炼接枝和温水交联分别制备了硅烷接枝天然橡胶和交联硅烷接枝天然橡胶,采用傅里叶红外光谱仪和扫描电子显微镜对其进行了表征,并研究了接枝单体及引发剂用量、接枝和交联工艺(温度和时间)等对其凝胶含量的影响,同时研究了不同凝胶含量对其力学性能的影响。结果表明,天然橡胶发生了硅烷接枝和交联反应;随着接枝单体及引发剂用量、混炼时间和温度以及交联温度和时间的增加,交联硅烷接枝天然橡胶的凝胶含量单调增加,其力学性能随着凝胶含量的增加而明显得到改善,凝胶含量为80%时,其拉伸强度比纯天然橡胶提高了30%,断裂伸长率提高了8.5倍。

  12. Stress-induced melting of crystals in natural rubber: a new way to tailor the transition temperature of shape memory polymers.

    Science.gov (United States)

    Heuwers, Benjamin; Quitmann, Dominik; Katzenberg, Frank; Tiller, Joerg C

    2012-09-26

    Lightly cross-linked natural rubber (NR, cis-1,4-polyisoprene) was found to be an exceptional cold programmable shape memory polymer (SMP) with strain storage of up to 1000%. These networks are stabilized by strain-induced crystals. Here, we explore the influence of mechanical stress applied perpendicular to the elongation direction of the network on the stability of these crystals. We found that the material recovers its original shape at a critical transverse stress. It could be shown that this is due to a disruption of the strain-stabilizing crystals, which represents a completely new trigger for SMPs. The variation of transverse stress allows tuning of the trigger temperature T(trig) (σ) in a range of 45 to 0 °C, which is the first example of manipulating the transition of a crystal-stabilized SMP after programming.

  13. CYCLOPENTYL TRISILANOL SILSESQUIOXANES – MODIFIED NATURAL RUBBER (CpSSQ(OH3– ENR-50 NANOCOMPOSITE IN THE PRESENCE OF TIN (II CHLORIDE DIHYDRATE

    Directory of Open Access Journals (Sweden)

    H. Rosniza

    2010-06-01

    Full Text Available A nanocomposite comprising cyclopentyl trisilanol silsesquioxanes (CpSSQ(OH3 and 50% epoxidized natural rubber (ENR-50 was prepared at reflux temperature with Tin (II chloride dihydrate (SnCl2.2H2O as catalyst. SnCl2.2H2O was found to be an affective catalyst to promote ring opening in ENR-50 and tailored it to CpSSQ(OH3 via chemical reaction. The generation of carbonyl functional groups arising from epoxide ring opening can be clearly seen in FTIR spectra. 1H and 29Si NMR analyses further proved that the incorporation of CpSSQ(OH3 in  ENR-50 occured. TGA studies showed a degradation temperature with 10% weight decreased and DSC thermogram indicates a single Tg. Single peak in XRD diffractogram at 2-Theta angle further confirmed the surface modification.   Keywords: silsesquioxanes, ENR-50, oxirane ring opening, hybrid

  14. Soil methane and CO2 fluxes in rainforest and rubber plantations

    Science.gov (United States)

    Lang, Rong; Blagodatsky, Sergey; Goldberg, Stefanie; Xu, Jianchu

    2017-04-01

    Expansion of rubber plantations in South-East Asia has been a land use transformation trend leading to losses of natural forest cover in the region. Besides impact on ecosystem carbon stocks, this conversion influences the dynamics of greenhouse gas fluxes from soil driven by microbial activity, which has been insufficiently studied. Aimed to understand how land use change affects the soil CO2 and CH4 fluxes, we measured surface gas fluxes, gas concentration gradient, and 13C signature in CH4 and soil organic matter in profiles in a transect in Xishuangbanna, including a rainforest site and three rubber plantation sites with age gradient. Gas fluxes were measured by static chamber method and open chamber respiration system. Soil gases were sampled from installed gas samplers at 5, 10, 30, and 75cm depth at representative time in dry and rainy season. The soil CO2 flux was comparable in rainforest and old rubber plantations, while young rubber plantation had the lowest rate. Total carbon content in the surface soil well explained the difference of soil CO2 flux between sites. All sites were CH4 sinks in dry season and uptake decreased in the order of rainforest, old rubber plantations and young rubber plantation. From dry season to rainy season, CH4 consumption decreased with increasing CH4 concentration in the soil profile at all depths. The enrichment of methane by 13CH4 shifted towards to lowerδ13C, being the evidence of enhanced CH4 production process while net surface methane flux reflected the consumption in wet condition. Increment of CH4 concentration in the profile from dry to rainy season was higher in old rubber plantation compared to rainforest, while the shifting of δ13CH4 was larger in rainforest than rubber sites. Turnover rates of soil CO2 and CH4 suggested that the 0-5 cm surface soil was the most active layer for gaseous carbon exchange. δ13C in soil organic matter and soil moisture increased from rainforest, young rubber plantation to old

  15. Greenhouse Gas Emissions from Rubber Industry in Thailand

    NARCIS (Netherlands)

    Jawjit, W.; Kroeze, C.; Rattanapan, S.

    2010-01-01

    Rubber production has been taking place in Thailand for many decades. Thailand is currently the world's largest natural rubber producer. We present emissions of greenhouse gases associated with the production of fresh latex, and three primary rubber products, including concentrated latex, block rubb

  16. Greenhouse Gas Emissions from Rubber Industry in Thailand

    NARCIS (Netherlands)

    Jawjit, W.; Kroeze, C.; Rattanapan, S.

    2010-01-01

    Rubber production has been taking place in Thailand for many decades. Thailand is currently the world's largest natural rubber producer. We present emissions of greenhouse gases associated with the production of fresh latex, and three primary rubber products, including concentrated latex, block

  17. A new model of water-lubricated rubber bearings for vibration analysis of flexible multistage rotor systems

    Science.gov (United States)

    Liu, Shibing; Yang, Bingen

    2015-08-01

    Flexible multistage rotating systems that are supported or guided by long water-lubricated rubber bearings (WLRBs) have a variety of engineering applications. Vibration analysis of this type of machinery for performance and duality requires accurate modeling of WLRBs and related rotor-bearing assemblies. This work presents a new model of WLRBs, with attention given to the determination of bearing dynamic coefficients. Due to its large length-to-diameter ratio, a WLRB cannot be described by conventional pointwise bearing models with good fidelity. The bearing model proposed in this paper considers spatially distributed bearing forces. For the first time in the literature, the current study addresses the issue of mixed lubrication in the operation of WLRBs, which involves interactions of shaft vibration, elastic deformation of rubber material and fluid film pressure, and validates the WLRB model in experiments. Additionally, with the new bearing model, vibration analysis of WLRB-supported flexible multistage rotating systems is performed through use of a distributed transfer function method, which delivers accurate and closed-form analytical solutions of steady-state responses without discretization.

  18. Constructing better roads with asphalt rubber

    Directory of Open Access Journals (Sweden)

    Pais Jorge C.

    2015-12-01

    Full Text Available Brazilians mixtures containing asphalt rubber were evaluated by mechanical laboratory tests. A conventional mixture with asphalt CAP-50/70 was produced as a mixture control. With the aim of compare the Brazilians mixtures performance, a Portuguese asphalt rubber mixture was tested as well. The testing set involved the determination of the mechanical properties, fatigue and permanent deformation, of asphalt rubber produced by wet process through two different systems: continuous blend and terminal blend. The asphalt rubber morphology was evaluated in order to determine the compatibility of the systems. The asphalt rubber mixtures exhibit good resistance to permanent deformation and prolonged fatigue life in relation to mixture control. Therefore it is concluded that the application of asphalt rubber alters the characteristics of asphalt mixture in a very beneficial way.

  19. Malaria-associated rubber plantations in Thailand.

    Science.gov (United States)

    Bhumiratana, Adisak; Sorosjinda-Nunthawarasilp, Prapa; Kaewwaen, Wuthichai; Maneekan, Pannamas; Pimnon, Suntorn

    2013-01-01

    Rubber forestry is intentionally used as a land management strategy. The propagation of rubber plantations in tropic and subtropic regions appears to influence the economical, sociological and ecological aspects of sustainable development as well as human well-being and health. Thailand and other Southeast Asian countries are the world's largest producers of natural rubber products; interestingly, agricultural workers on rubber plantations are at risk for malaria and other vector-borne diseases. The idea of malaria-associated rubber plantations (MRPs) encompasses the complex epidemiological settings that result from interactions among human movements and activities, land cover/land use changes, agri-environmental and climatic conditions and vector population dynamics. This paper discusses apparent issues pertaining to the connections between rubber plantations and the populations at high risk for malaria. The following questions are addressed: (i) What are the current and future consequences of rubber plantations in Thailand and Southeast Asia relative to malaria epidemics or outbreaks of other vector-borne diseases? (ii) To what extent is malaria transmission in Thailand related to the forest versus rubber plantations? and (iii) What are the vulnerabilities of rubber agricultural workers to malaria, and how contagious is malaria in these areas?

  20. Shaking table test and dynamic response analysis of 3-D component base isolation system using multi-layer rubber bearings and coil springs

    Energy Technology Data Exchange (ETDEWEB)

    Tsutsumi, Hideaki; Yamada, Hiroyuki; Ebisawa, Katsumi; Shibata, Katsuyuki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Fujimoto, Shigeru [Toshiba Corp., Tokyo (Japan)

    2001-06-01

    Introduction of the base isolation technique into the seismic design of nuclear power plant components as well as buildings has been expected as one of the effective countermeasure to reduce the seismic force applied to components. A research program on the base isolation of nuclear components has been carried out at the Japan Atomic Energy Research Institute (JAERI) since 1991. A methodology and a computer code (EBISA: Equipment Base Isolation System Analysis) for evaluating the failure frequency of the nuclear component with the base isolation were developed. In addition, a test program, which is concerned with the above development, aiming at improvement of failure frequency analysis models in the code has been conducted since 1996 to investigate the dynamic behavior and to verify the effectiveness of component base isolation systems. Two base isolation test systems with different characteristics were fabricated and static and dynamic characteristics were measured by static loading and free vibration tests. One which consists of ball bearings and air springs was installed on the test bed to observe the dynamic response under natural earthquake motion. The effect of base isolation system has been observed under several earthquakes. Three-dimensional response and effect of base isolation of another system using multi-layer-rubber-bearings and coil springs has been investigated under various large earthquake motions by shaking table test. This report describes the results of the shaking table tests and dynamic response analysis. (author)

  1. COMPATIBILITY OF NATURAL RUBBER OF DIFFERENT CHAIN STRUCTURE WITH BUTADIENE-STYRENE RUBBER%不同链化学结构丁苯橡胶与天然橡胶混容性研究

    Institute of Scientific and Technical Information of China (English)

    马德柱; 郝文涛; 徐文总; 罗筱烈; 梁俐

    2001-01-01

    Three typical styrene-butadiene rubbers(SBR)were chosen:emulsion-SBR(ESBR)and two kinds of solution-SBR(SSBR(C)) and (SSBR(B)). Fourier transform infrared(FTIR) was used to analysis the chain structure; dynamic mechanical analysis (DMA) and differential scanning calorimeter (DSC) were used to study the compatibility of these three SBR with NR. The results show that:the blend system of SSBR(B) with NR is compatible. The blend systems of ESBR and SSBR(C) with NR exhibit two-phase morphology. The differences in compatibility among the three kinds of SBR with NR can be well explained by comparing their chain structure. The content of cis-1,4 polybutadiene (PB) in SSBR(B) is more than that in the other two SBRs and the content of 1,2-add PB is the lowest.%选择了三种丁苯橡胶(SBR)——乳聚丁苯胶(ESBR)、溶聚丁苯C(SSBR(C))及溶聚丁苯B(SSBR(B)),用红外光谱(FTIR)分析了它们的链化学结构.同时,用动态力学谱(DMA)和示差扫描量热谱(DSC)研究了这三种SBR与天然橡胶(NR)的混容性.结果表明,SSBR(B)与NR具有很好的混容性.三种SBR与NR混容性的差别,与SBR链化学结构不同有关.

  2. 不同制备方法对凹凸棒石/天然橡胶复合材料性能的影响%Influence of Different Preparation Methods on The Properties of Attapulgite/natural Rubber Composites

    Institute of Scientific and Technical Information of China (English)

    胡盛; 杨眉; 田大听; 周红艳; 胡卫兵; 谭远斌; 曹贞虎

    2011-01-01

    Attapulgite/natural rubber composites(M-ANRC) and modified attapulgite/natural rubber composites(M-MANRC) were prepared by mechanical blending. Attapulgite/natural rubber composites (C-ANRC) and modified attapulgite/natural rubber composites(C-MANRC) were prepared by co-coagulating rubber latex and clay aqueous suspension. The mechanical properties suggested that C-ANRC prepared by co-coagulating rubber latex and clay aqueous suspension were better than M-ANRC. The tensile strength, tear strength and tensile modulus at 200% of the C-ANRC increased by 77.5 %, 35.9 %, 125.6%, respectively. The mechanical properties of the C-MANRC prepared by co-coagulating rubber latex and clay aqueous suspension was the best. The structure of the C-ANRC, C-MANRC shown by scanning electron microscope (SEM) is tight.Attapulgite inserted into natural rubber matrix in C-ANRC and C-MANRC more uniformly dispersive than in M-ANRC is basically composed of nano-rods. Attapulgite combines well with natural rubber matrix. The process of co-coagulating rubber latex and clay aqueous suspension was analyzed.%采用机械共混法制备了凹凸棒石/天然橡胶复合材料(M-ANRC)和改性凹凸棒石/天然橡胶复合材料(M-MANRC),采用乳液共混共凝法制备了凹凸棒石/天然橡胶复合材料(C-ANRC)和改性凹凸棒石/天然橡胶复合材料(C-MANRC).力学性能测试结果表明,与M-ANRC的力学性能相比,C-ANRC的扯断强度、撕裂强度、200%定伸强度分别提高了77.5%、35.9%、125.6%; C-MANRC的综合力学性能最好.SEM分析结果显示,C-ANRC和C-MANRC中的凹凸棒石比M-ANRC和M-MANRC中的凹凸棒石在天然橡胶基体中分散得更加均匀且棒径更小;C-MANRC结构致密,凹凸棒石基本上都呈纳米棒状,且较均匀地分布在天然橡胶基体中,与天然橡胶基体结合良好.同时,对乳液共混共凝过程进行了初步分析.

  3. Compósitos de Borracha Natural com Compostos Condutivos à Base de Negro de Fumo e Polímero Condutor Natural Rubber Composites with Conductive Compounds based on Carbon Black and Conducting Polymers

    Directory of Open Access Journals (Sweden)

    Marinalva A. dos Santos

    2001-09-01

    Full Text Available Neste trabalho foram desenvolvidos compósitos condutores elétricos de borracha natural contendo negro de fumo e compostos condutivos baseados em polímeros condutores (Eenomer®. Os compósitos foram processados a quente num reômetro de torque HAAKE e moldados por prensagem. Foram obtidas placas homogêneas, flexíveis e com ótimo acabamento superficial. Os compósitos foram analisados pelas medidas de torque no processamento, medidas de condutividade elétrica, análise termogravimétrica (TGA, calorimetria diferencial de varredura (DSC e ensaios de tração. Estes compósitos apresentaram valores de condutividade elétrica entre 10-7 a 10-1 S/cm, dependendo do tipo de negro de fumo ou composto condutivo utilizado e da quantidade destes no compósito. A análise térmica demonstrou que os compósitos são termicamente estáveis até cerca de 300°C. Os compostos condutivos atuam como reforço para a borracha natural melhorando suas propriedades mecânicas sem perder significativamente sua flexibilidade.In this work, electrically conducting composites of natural rubber with carbon black and natural rubber with conductive compounds containing electrically conducting polymers (Eenomer® were developed. The composites were processed in a torque reometer HAAKE and then hot pressed. Homogeneous and flexible plates were obtained with excellent surface finish. The composites were analysed by the torque measurement during processing, electrical conductivity, thermogravimetric analysis (TGA, differential scanning calorimetric (DSC and mechanical analysis. Conductivity in the order of 10-7 to 10-1 S/cm were achieved, depending on the type of carbon black or conductive compound used and their content in the composite. Thermal analysis demonstrated that the compounds are thermally stable until 300°C. The conductive compounds act as reinforcements in the natural rubber matrix, improving its mechanical properties without significant loss on its

  4. Preparation of Pressure Sensitive Adhesives Based on Visible Light-Cured Natural Rubber Latex%可见光固化天然胶乳压敏胶的研制

    Institute of Scientific and Technical Information of China (English)

    唐盛斌; 徐志义; 廖建和; 陈永平; 廖双泉; 桂红星

    2009-01-01

    Degraded natural latex was mixed with terpene resin emulsion and other additives and then cured under the visible light initiator system to prepare oil-in-water emulsion type of pressure-sensitive adhesive (PSA). The ratio of degraded natural rubber to terpene resin emulsion,molecular weight and amounts of other additives were measured to observe their effects on the properties of PSA under a given light intensity. The results showed that the PSA with optimum properties was prepared under the following conditions: the ratio of the degraded natural latex and terpene resin emulsion was 1:1,molecular weight of the degraded natural rubber latex 19.8×10~4,the amount of initiator 1.2%,the amount of cross-linker 15%,and the amount of accelerant 0.4%. The DSC and TG/DTG showed that the PSA was improved in thermal stability after the PSA containing photo-initiator was cured by visible light. The PSA containing photo-initiator showed an increase of 5℃ in Tg,and was still available under a very low temperature.%采用可见光引发体系固化将降解天然胶乳与萜烯树脂乳液的其他助剂组合制备水乳型压敏胶,研究在一定光照强度下,降解天然胶乳与萜烯树脂乳液的不同配比,天然胶乳不同分子量,其他助剂的用量对压敏胶性能的影响.结果表明,降解天然胶乳与萜烯树脂乳液质量比为1:1、降解天然胶乳分子量为19.8×10~4、引发剂1.2%、交联剂15%、促进剂0.4%时压敏胶性能最优.DSC和TG/DTG表明含有光引发剂的压敏胶在光照后热稳定性提高,压敏胶的Tg升高了5℃,仍具有很低的使用温度.

  5. A novel approach to investigate effect of magnetic field on dynamic properties of natural rubber based isotropic thick magnetorheological elastomers in shear mode

    Institute of Scientific and Technical Information of China (English)

    Sriharsha Hegde; Katari Kiran; K V Gangadharan

    2015-01-01

    The preparation of natural rubber based isotropic thick magnetorheological elastomers (MRE) was focused on by varying the percentage volume concentration of carbonyl iron powder and developing a test set up to test the dynamic properties. Effect of magnetic field on the damping ratio was studied on the amplification region of the transmissibility curve. The viscoelastic dynamic damping nature of the elastomer was also studied by analyzing the force-displacement hysteresis graphs. The results show that MR effect increases with the increase in magnetic field as well as carbonyl iron powder particle concentration. It is observed that softer matrix material produces more MR effect. A maximum of 125% improvement in the loss factor is observed for the MRE with 25% carbonyl iron volume concentration. FEMM simulation shows that as carbonyl iron particle distribution becomes denser, MR effect is improved. FEMM analysis also reveals that if the distance between the adjacent iron particles are reduced from 20μm to 10μm, a 40% increase in stored energy is observed.

  6. Avaliação de compostos de borracha natural utilizados em equipamentos de segurança Evaluation of natural rubber compounds used in line-life equipment

    Directory of Open Access Journals (Sweden)

    Emilio M. de Paz Jr.

    2010-09-01

    Full Text Available No setor elétrico, a borracha natural (BN tem sido amplamente utilizada na confecção de ferramentas isolantes. Esses são itens essenciais para a segurança e proteção de trabalhadores da área de manutenção de redes de distribuição de energia elétrica. A boa conservação dessas ferramentas deve ser assegurada com o objetivo de garantir o isolamento elétrico e resistência mecânica adequados, portanto a avaliação dos processos de degradação se torna importante. Neste trabalho duas formulações de borracha natural comerciais, utilizadas na confecção de equipamentos de proteção coletiva (EPC's, foram caracterizadas por envelhecimento térmico, ensaios mecânicos, termogravimétricos, análise termo-dinâmico mecânica, inchamento e extração.Electrical engineering sector make use of natural rubber to manufacture line-life equipment, utilized to promote safety and protection for those who work in the electrical networks maintenance. A good conservation of the equipment must be assured in order to guarantee the necessary insulation. Thus, the assessment of the degradation processes becomes important. In this study two commercial types of natural rubber commonly employed to produce collective protective equipment (CPE, were evaluated using artificial thermal ageing through mechanical, swelling tests, thermogravimetric analysis, dynamic mechanical thermal analysis and solvent extraction.

  7. Natural interaction for unmanned systems

    Science.gov (United States)

    Taylor, Glenn; Purman, Ben; Schermerhorn, Paul; Garcia-Sampedro, Guillermo; Lanting, Matt; Quist, Michael; Kawatsu, Chris

    2015-05-01

    Military unmanned systems today are typically controlled by two methods: tele-operation or menu-based, search-andclick interfaces. Both approaches require the operator's constant vigilance: tele-operation requires constant input to drive the vehicle inch by inch; a menu-based interface requires eyes on the screen in order to search through alternatives and select the right menu item. In both cases, operators spend most of their time and attention driving and minding the unmanned systems rather than on being a warfighter. With these approaches, the platform and interface become more of a burden than a benefit. The availability of inexpensive sensor systems in products such as Microsoft Kinect™ or Nintendo Wii™ has resulted in new ways of interacting with computing systems, but new sensors alone are not enough. Developing useful and usable human-system interfaces requires understanding users and interaction in context: not just what new sensors afford in terms of interaction, but how users want to interact with these systems, for what purpose, and how sensors might enable those interactions. Additionally, the system needs to reliably make sense of the user's inputs in context, translate that interpretation into commands for the unmanned system, and give feedback to the user. In this paper, we describe an example natural interface for unmanned systems, called the Smart Interaction Device (SID), which enables natural two-way interaction with unmanned systems including the use of speech, sketch, and gestures. We present a few example applications SID to different types of unmanned systems and different kinds of interactions.

  8. Terrestrial pteridophytes as indicators of a forest-like environment in rubber production systems in the lowlands of Jambi, Sumatra

    NARCIS (Netherlands)

    Beukema, Hendrien; van Noordwijk, M

    2004-01-01

    Species richness of terrestrial ferns and fern allies (Pteridophyta) may indicate forest habitat quality, as analysed here for a tropical lowland area in Sumatra. A total of 51 standard 0.16 ha plots in primary forest, rubber (Hevea brasiliensis) agroforests and rubber plantations was compared for p

  9. Terrestrial pteridophytes as indicators of a forest-like environment in rubber production systems in the lowlands of Jambi, Sumatra

    NARCIS (Netherlands)

    Beukema, Hendrien; van Noordwijk, M

    Species richness of terrestrial ferns and fern allies (Pteridophyta) may indicate forest habitat quality, as analysed here for a tropical lowland area in Sumatra. A total of 51 standard 0.16 ha plots in primary forest, rubber (Hevea brasiliensis) agroforests and rubber plantations was compared for

  10. Effect of non-rubber constituents on guayule and Hevea rubber intrinsic properties

    Science.gov (United States)

    To meet the increasing demand for natural rubber (NR), and address price volatility and steadily increasing labor costs, alternate rubber-producing species are in commercial development. One of these, guayule (Parthenium argentatum), has emerged on the market as a sustainable commercial source of h...

  11. Shape memory rubber bands & supramolecular ionic copolymers

    Science.gov (United States)

    Brostowitz, Nicole

    The primary focus of this dissertation is to understand the thermo-mechanical properties that govern shape memory in rubber blends. An ideal shape memory polymer (SMP) has a large entropic component that drives shape recovery with a distinct transition mechanism to control the recovery conditions. Polyisoprene rubber is highly elastic and shows shape memory behavior through strain induced crystallization above its glass transition temperature. However, this transition temperature is below 0°C and not suitable for most applications. Shape memory blends can tailor the transition temperature through selection of the switching phase. Most SMP blends require complicated synthesis routes or intensive compounding which would be inhibitive for production. A facile method was developed for fabrication of a robust shape memory polymer by swelling cross-linked natural rubber with stearic acid. Thermal, microscopic studies showed that stearic acid formed a percolated network of crystalline platelets within the natural rubber. Further investigation of the material interactions was carried out with a low molecular weight polyisoprene analog, squalene, and stearic acid gel. Tensile tests on the rubber band demonstrated the thermo-mechanical effect of swelling with stearic acid. Low hysteresis was observed under cyclic loading which indicated viability for the stearic acid swollen rubber band as an SMP. The microscopic crystals and the cross-linked rubber produce a temporary network and a permanent network, respectively. These two networks allow thermal shape memory cycling with deformation and recovery above the melting point of stearic acidand fixation below that point. Under manual, strain-controlled tensile deformation, the shape memory rubber bands exhibited fixity and recovery of 100% +/- 10%. The recovery properties of the SMP were studied under various loading conditions and a model was fit to describe the potential recovery with relation to the fixation. An additional

  12. PENINGKATAN PRODUKTIVITAS PROSES BUDIDAYA KARET ALAM DENGAN PENDEKATAN GREEN PRODUCTIVITY: STUDI KASUS DI PT. XYZ (The Increase of Natural Rubber Plantations Productivity with Green Productivity Approach: a Case Study at PT. XYZ

    Directory of Open Access Journals (Sweden)

    Marimin Marimin

    2014-02-01

    Full Text Available Indonesia is the second largest natural rubber producer in the world with 28% of the total world production in 2010. In line with the growth of the world’s automotive industry, the needs of natural rubber as a complementary synthetic rubber products will also increase. The main objective of this research was to find the best alternative strategy to increase the productivity of the natural rubber plantations through the green productivity (GP approach. The case study was conducted at PT. XYZ, a private company which runs the plantation and processing of natural rubber businesses. The material flow analysis was performed to identify the seven green wastes. The best alternative strategy was determined by using the  analytical Hierarchy Process (AHP model developed into several improvement scenarios. The measurement of  the alternative strategy performance was rated as the future Green Productivity Index (GPI and compared with the value of current GPI, which had been calculated in the PT. XYZ, as the case study. The results of this research was  able to provide the best productivity improvement strategy, the level of company’s productivity which has been achieved, and the productivity levels of the implementation of the strategy chosen. Keywords: aHP, green productivity,  green wastes, natural rubber, green productivity index, latex   ABSTRAK Indonesia merupakan negara kedua penghasil karet alam terbesar di dunia dengan produksi sebesar 28% dari total produksi dunia di tahun 2010. Sejalan dengan bertumbuhnya industri otomotif dunia, kebutuhan karet alam sebagai produk komplementer karet sintetik akan turut mengalami peningkatan. Tujuan utama penelitian ini adalah untuk merumuskan alternatif strategi terbaik pada peningkatan produktivitas proses budidaya karet alam melalui pendekatan konsep Green Productivity (GP. Studi kasus dilakukan di PT. XYZ, perusahaan swasta yang bergerak dibidang usaha perkebunan dan pengolahan karet alam. analisis

  13. Characterization of rubber particles and rubber chain elongation in Taraxacum koksaghyz

    Directory of Open Access Journals (Sweden)

    Prüfer Dirk

    2010-02-01

    Full Text Available Abstract Background Natural rubber is a biopolymer with exceptional qualities that cannot be completely replaced using synthetic alternatives. Although several key enzymes in the rubber biosynthetic pathway have been isolated, mainly from plants such as Hevea brasiliensis, Ficus spec. and the desert shrub Parthenium argentatum, there have been no in planta functional studies, e.g. by RNA interference, due to the absence of efficient and reproducible protocols for genetic engineering. In contrast, the Russian dandelion Taraxacum koksaghyz, which has long been considered as a potential alternative source of low-cost natural rubber, has a rapid life cycle and can be genetically transformed using a simple and reliable procedure. However, there is very little molecular data available for either the rubber polymer itself or its biosynthesis in T. koksaghyz. Results We established a method for the purification of rubber particles - the active sites of rubber biosynthesis - from T. koksaghyz latex. Photon correlation spectroscopy and transmission electron microscopy revealed an average particle size of 320 nm, and 13C nuclear magnetic resonance (NMR spectroscopy confirmed that isolated rubber particles contain poly(cis-1,4-isoprene with a purity >95%. Size exclusion chromatography indicated that the weight average molecular mass (w of T. koksaghyz natural rubber is 4,000-5,000 kDa. Rubber particles showed rubber transferase activity of 0.2 pmol min-1 mg-1. Ex vivo rubber biosynthesis experiments resulted in a skewed unimodal distribution of [1-14C]isopentenyl pyrophosphate (IPP incorporation at a w of 2,500 kDa. Characterization of recently isolated cis-prenyltransferases (CPTs from T. koksaghyz revealed that these enzymes are associated with rubber particles and are able to produce long-chain polyprenols in yeast. Conclusions T. koksaghyz rubber particles are similar to those described for H. brasiliensis. They contain very pure, high molecular mass

  14. Stochastic analysis on response change due to deteriorating of rubber-pads in base-isolation system for fast breeder reactor, (1)

    Energy Technology Data Exchange (ETDEWEB)

    Yabana, Shuichi; Shibata, Heki (Tokyo Univ. (Japan). Inst. of Industrial Science)

    1990-03-01

    The aseismatic capability of practical FBRs in insufficient in the original design when those are installed in Japan, and for its improvement, the use of base isolation system has been studied. Many rubber pads are used for supporting building structures, and for the analysis of their characteristics, special consideration is required. Dispersion arises in their characteristics in the manufacturing processes and in the use of long period (20-40 years corresponding to plant life). In this paper, the phenomena which do not arise in ordinary earthquake response analysis, but occur under the premise of the dispersion in rubber pad characteristics are taken up. Consideration on the hardening model of rubber pads, the analysis model and the method of analysis of a base isolation system, and the examination on the basic characteristics of torsional response are reported. When the relation of the dispersion in rubber pad characteristics with the maximum torsional angle and others is determined by this method, the characteristics of other models can be estimated also by simplified techniques. (K.I.).

  15. The effect of antioxidant concentration of N-isopropyl-N-phenyl-p-phenylenediamine, and 2,2,4-trimethyl-1,2-dihydroquinoline and mixing time of physical properties, thermal properties, mechanical properties and microstructure on natural rubber compound

    Science.gov (United States)

    Budiarto

    2017-03-01

    Study the influence of high concentrations of antioxidants N-isopropyl-N-phenyl-p-phenylenediamine (IPPD) and 2,2,4-trimethyl-1,2-dihydroquinoline (TMQ) and the mixing time of the vulcanization physical properties, thermal properties, mechanical properties and structure micro on natural rubber compound has been done. The purpose of this study is to compare the effect of anti-oxidants types IPPD and TMQ and mixing time of vulcanization of the physical properties, mechanical properties, microstructure and elemental composition of the synthesis of natural rubber compound. Processes of vulcanization with variations in the concentration of antioxidant IPPD and TMQ: 2, 3, and 4 grams and mixing time: 20, 30, and 40 minutes. Analysis characterization of physical properties and mechanical properties of natural rubber compound showed that the maturity value 0,499Nm (TMQ) and 0.489 Nm (IPPD), Mooney viscosity value of 26.7 (TMQ) and 20.8 (IPPD), the value of the elongation at break 583.75 % (IPPD), and 552.63% (TMQ) as well as the value of tensile strength of 28.108 M.Pa (TMQ), and 27.986 M.Pa (IPPD). Analysis of thermal properties of natural rubber compound antioxidant IPPD with DTA shows there are three endothermic peak on the curve that is temperature 405°C, 550°C and 660°C and tested by TGA showed that the curve of the total reduction in the sample are 81.745% and compound rubber antioxidant TMQ with the analysis of DTA also contained 3 endothermic peak at a temperature 397,21°C, 514,02°C, and 610,27°C and TGA analysis shows the curve of the total sample of 82.356% reduction. Gsi fun group analysis rubber-antioxidant compound IPPD / TMQ with FTIR spectrophotometer shows some typical infrared absorption peak at the wave number (1 / λ) 833-895 cm-1 for cluster / CH bonds, 1,313 cm-1 for group / single bond Si-O, 1368 cm-1 to g ugus / single bond CC, 1507 cm-1, for cluster / bond C = C, 1665 cm-1For cluster / bond-C = O, 2128 cm-1 is the group / bond CN single, 3371

  16. Research on Structure and Properties of Rapid Coagulation Natural Rubber%快速凝固天然橡胶的结构和性能的研究∗

    Institute of Scientific and Technical Information of China (English)

    张胜君; 于人同; 白晓莹; 候雪; 廖双泉

    2016-01-01

    采用硬脂酸、异辛醇以及羟丙基甲基纤维素作为辅助剂制备了快速凝固天然橡胶,并对凝固后天然生胶的结构、加工性能、热稳定性和力学性能进行研究。研究表明快速凝固橡胶的蛋白质含量增加。与乙酸凝固相比,快速凝固天然橡胶具有更高的热稳定性、较低的损耗因子。同时,快速凝固天然橡胶的拉伸强度和撕裂强度相对乙酸凝固天然橡胶分别由18.0 MPa 与28.9 kN·m-1提高到21.1 MPa 和35.5 kN·m-1,交联密度由4.39×105 mol/cm3提高到5.09×105 mol/cm3。%Rapid coagulation natural rubber was prepared by using of stearic acid, 2-ethylhexanol and hydroxypropyl methyl cellulose as auxiliary agents.And the structure,processability,thermal stability and mechani-cal property of the rubber were studied.The protein content of the resulting natural rubber was higher than that of natural rubber coagulated with acetic acid.Results showed that thermal stability was improved and the loss factor was decreased via rapid coagulation method.Comparing with acetic acid coagulation rubber,the tensile strength of the rapid coagulation natural rubber was enhanced from 18.0 MPa to 21.1 MPa,the tear strength was improved from 28.9 kN·m-1 to 35.5 kN·m-1 as well,the crosslinked density was increased from 4.39×10 5 mol/cm3 to 5.09×10 5 mol/cm3 .

  17. Experimental Investigation into Mechanical Properties of Nanomaterial-reinforced Table Tennis Rubber

    Directory of Open Access Journals (Sweden)

    Yu-Fen Chen

    2016-10-01

    Full Text Available A new table tennis rubber is prepared consisting of carbon nanotubes, zinc oxide and titanium oxide added to a mixture of natural and synthesized rubber. The Nano-reinforced rubber is attached to wooden table tennis blades and patterned with four different surface structures, namely flat, long pimples, short pimples and medium pimples. The results show that of the five rubbers, the Nano-reinforced rubber with a flat surface offers a significantly improved elastic and mechanical performance

  18. Biotemplate synthesis of polyaniline@cellulose nanowhiskers/natural rubber nanocomposites with 3D hierarchical multiscale structure and improved electrical conductivity.

    Science.gov (United States)

    Wu, Xiaodong; Lu, Canhui; Xu, Haoyu; Zhang, Xinxing; Zhou, Zehang

    2014-12-10

    Development of novel and versatile strategies to construct conductive polymer composites with low percolation thresholds and high mechanical properties is of great importance. In this work, we report a facile and effective strategy to prepare polyaniline@cellulose nanowhiskers (PANI@CNs)/natural rubber (NR) nanocomposites with 3D hierarchical multiscale structure. Specifically, PANI was synthesized in situ on the surface of CNs biotemplate to form PANI@CNs nanohybrids with high aspect ratio and good dispersity. Then NR latex was introduced into PANI@CNs nanohybrids suspension to enable the self-assembly of PANI@CNs nanohybrids onto NR latex microspheres. During cocoagulation process, PANI@CNs nanohybrids selectively located in the interstitial space between NR microspheres and organized into a 3D hierarchical multiscale conductive network structure in NR matrix. The combination of the biotemplate synthesis of PANI and latex cocoagulation method significantly enhanced the electrical conductivity and mechanical properties of the NR-based nanocomposites simultaneously. The electrical conductivity of PANI@CNs/NR nanocomposites containing 5 phr PANI showed 11 orders of magnitude higher than that of the PANI/NR composites at the same loading fraction,; meanwhile, the percolation threshold was drastically decreased from 8.0 to 3.6 vol %.

  19. Graphene networks and their influence on free-volume properties of graphene-epoxidized natural rubber composites with a segregated structure: rheological and positron annihilation studies.

    Science.gov (United States)

    He, Canzhong; She, Xiaodong; Peng, Zheng; Zhong, Jieping; Liao, Shuangquan; Gong, Wei; Liao, Jianhe; Kong, Lingxue

    2015-05-14

    Epoxidized natural rubber-graphene (ENR-GE) composites with segregated GE networks were successfully fabricated using the latex mixing combined in situ reduced technology. The rheological behavior and electrical conductivity of ENR-GE composites were investigated. At low frequencies, the storage modulus (G') became frequency-independent suggesting a solid-like rheological behavior and the formation of GE networks. According to the percolation theory, the rheological threshold of ENR-GE composites was calculated to be 0.17 vol%, which was lower than the electrical threshold of 0.23 vol%. Both percolation thresholds depended on the evolution of the GE networks in the composites. At low GE concentrations (<0.17 vol%), GE existed as individual units, while a "polymer-bridged GE network" was constructed in the composites when GE concentrations exceeded 0.17 vol%. Finally, a "three-dimensional GE network" with percolation conductive paths was formed with a GE concentration of 0.23 vol%, where a remarkable increase in the conductivity of ENR-GE composites was observed. The effect of GE on the atom scale free-volume properties of composites was further studied by positron annihilation lifetime spectroscopy and positron age momentum correlation measurements. The motion of ENR chains was retarded by the geometric confinement of "GE networks", producing a high-density interfacial region in the vicinity of GE nanoplatelets, which led to a lower ortho-positronium lifetime intensity and smaller free-volume hole size.

  20. A proteomic investigation of B lymphocytes in an autistic family: a pilot study of exposure to natural rubber latex (NRL) may lead to autism.

    Science.gov (United States)

    Shen, Chen; Zhao, Xin-liang; Ju, Weina; Zou, Xiao-bing; Huo, Li-rong; Yan, Wu; Zou, Jun-hua; Yan, Guo-di; Jenkins, Edmund C; Brown, W Ted; Zhong, Nanbert

    2011-03-01

    Autism is a multi-factorial neurodevelopmental disorder. We have investigated the molecular mechanism involved in a Chinese family with autism by a proteomic approach. Antibody chips containing 500 spots of human protein antibodies were used to screen for differentially expressed proteins in the peripheral B lymphocytes between autistic and non-autistic siblings in this family. Four proteins relevant to immuno-pathway, including IKKα that was up-regulated and Tyk2, EIF4G1 and PRKCI that were down-regulated, were identified differentially expressed in autistic versus non-autistic siblings. Western blot analysis and reverse transcription quantitative polymerase chain reaction validated the differential expression of these four proteins. Based on the function of these differentially expressed proteins, relevant studies on immunoglobulin E (IgE) level, nuclear factor kappa B signaling activation and cell cycle were conducted in both autistic and non-autistic children of this family. Considering the fact that the family members were in close contact with natural rubber latex (NRL) and that IgE-mediated cross-reactions could be triggered by Hevea brasiliensis (Hev-b) proteins in NRL, we hypothesize that immune reactions triggered by close contact with NRL might influence the functions of B lymphocytes by altering expression of certain proteins identified in our experiments thus contributing to the occurrence of autism.