Using the whole-building design approach to incorporate daylighting into a retail space: Preprint

Energy Technology Data Exchange (ETDEWEB)

Hayter, S.; Torcellini, P.; Eastment, M.; Judkoff, R.

2000-06-21

This paper focuses on implementation of daylighting into the Bighorn Center, a collection of home improvement retail spaces in Silverthorne, Colorado, which were constructed in three phases. Daylighting was an integral part of the design of the Phase 3 building. Energy consultants optimized the daylighting design through detailed modeling using an hourly building energy simulation tool. Energy consultants also used this tool to address the building owner's concerns related to customer comfort and increased product sales.

Daylighting practices of the architectural industry (baseline results of a national survey)

Energy Technology Data Exchange (ETDEWEB)

Hattrup, M.P.

1990-05-01

A national survey of over 300 commercial design architects was conducted to develop baseline information on their knowledge, perceptions, and use of daylighting in commercial building designs. Pacific Northwest Laboratory conducted the survey for the US Department of Energy's (DOE) Office of Building and Community Systems (BCS). In the survey daylighting was defined as the intentional use of natural light as a partial substitute for artificially generated light. The results suggested that architects need to be educated about the true benefits of daylighting and the impacts it can have on a building's energy performance. Educational programs that will increase the architects' understanding and awareness of modern daylighting technologies and practices should be developed by utilities, stage agencies, and the federal government. If more architects can be made aware of the true effectiveness and positive attributes of daylighting systems and technologies, daylighting may be used in more commercial buildings. The results of the survey show that the more familiar architects feel they are with daylighting, the more they use daylighting. 3 refs., 19 tabs.

Daylight utilisation in office buildings

DEFF Research Database (Denmark)

Christoffersen, Jens

This Ph.D. thesis presents the qualitative and quantitative consequences of full-scale measurements on two daylighting systems, light shelf and Venetian blinds. The systems were investigated to assess their ability to increase daylight penetration and improve daylight distribution in the interior...... the benefits and difficulties regarding use of daylight in office buildings, but it is hoped that the report will provide daylight conscious building design in forthcoming non-domestic buil dings....

Optimal tree design for daylighting in residential buildings

Energy Technology Data Exchange (ETDEWEB)

Hongbing, Wang [College of Landscape Architecture, Beijing Forestry University, 35, East Qinghua Rd., Beijing (China); Shanghai Botanical Garden, 1111, Longwu Rd., Shanghai (China); Jun, Qin; Yonghong, Hu [Shanghai Botanical Garden, 1111, Longwu Rd., Shanghai (China); Li, Dong [College of Landscape Architecture, Beijing Forestry University, 35, East Qinghua Rd., Beijing (China)

2010-12-15

Urban reforestation is advocated as an efficient countermeasure to the intensification of urban heat islands. The greening and beautification of residential quarters is one of the main concerns of residents, while lighting and ventilation are two main energy-consuming building services. Hence, the tree layout in green space between buildings is important, and it is necessary to determine the relationships between trees and buildings. This study takes Shanghai as a case study to optimize tree design between residential buildings and meet good daylighting requirements. Models were made using software such as AutoCAD and SketchUp. The relationships between maximum tree height and building separation were determined. For the same building layout, there were different tree height limits according to crown shape; the order of decreasing height limits was cylindrical, conical, spherical, and inverted conical crowns. Three cases having different green space between building layouts were studied. Their maximum tree heights differed. Overall, our model helps us realize good daylighting of a building environment. The formula allows us to determine which trees to plant between buildings in that we can predict the effects of future tree growth on building daylighting. (author)

The study on the computer analysis of solar daylighting system in the schoolroom

Energy Technology Data Exchange (ETDEWEB)

Oh, W. J.; Makhmudov, I.; Lee, Y. J.; Chun, W. G. [Jeju National University, Jeju (Korea, Republic of)

2010-10-15

Daylighting is the efficient use of natural light in order to minimize the need for artificial light in buildings. A well thought out building designed with daylighting can have a number of significant benefits for building owners and occupants. Increasing levels of daylight within rooms can reduce electrical lighting loads by up to 70% in some cases. In this study, the daylighting system using mini dish and optical fiber was analyzed for application to the schoolroom by the simulation of ECOTECT and RADIANCE

Overheating and Daylighting; Assessment Tool in Early Design of London’s High-Rise Residential Buildings

Directory of Open Access Journals (Sweden)

Bachir Nebia

2017-08-01

Full Text Available High-rise residential buildings in dense cities, such as London, are a common response to housing shortage. The apartments in these buildings may experience different levels of thermal and visual comfort, depending on their orientation and floor level. This paper aims to develop simplified tools to predict internal temperatures and daylighting levels, and propose a tool to quickly assess overheating risk and daylight performance in London’s high-rise residential buildings. Single- and double-sided apartments in a high-rise building were compared, and the impact of their floor level, glazing ratio, thermal mass, ventilation strategy and orientation was investigated. Using Integrated Environmental Solutions Virtual Environment (IES VE, temperature and daylight factor results of each design variable were used to develop early design tools to predict and assess overheating risks and daylighting levels. The results indicate that apartments that are more exposed to solar radiations, through either orientation or floor level, are more susceptible to overheat in the summer while exceeding the daylighting recommendations. Different design strategies at different levels and orientations are subsequently discussed.

Analysis and prediction of daylighting and energy performance in atrium spaces using daylight-linked lighting controls

International Nuclear Information System (INIS)

Chow, Stanley K.H.; Li, Danny H.W.; Lee, Eric W.M.; Lam, Joseph C.

2013-01-01

Highlights: ► Daylight-linked lighting control and energy performance for atrium is studied. ► Field measurement of automatic dimming control shows 93% energy saving. ► Field measurement of manual on–off control shows 95% energy saving. ► Atrium illuminance is correlated with daylight factor for energy saving prediction. - Abstract: In subtropical Hong Kong, a certain amount of electricity is used to create visually comfortable interior spaces through electric lighting, which is the second major electricity-consuming item in commercial buildings, accounting for 20–30% of total electricity use. The burning of fossil fuels for electricity generation has many adverse effects on the environment. Daylighting is an important and useful strategy for enhancing visual comfort and reducing the need for the electricity consumed by light fittings. The rational use of daylight through tools such as photoelectric lighting controls can effectively reduce buildings’ electricity consumption and the related pollutants and greenhouse gas emissions. Daylighting design techniques are often best demonstrated via field measurements that provide reliable operational and energy performance data for establishing design guidelines. An atrium provides an environmentally controlled indoor public space that introduces daylight into the hearts of large buildings. In circulation areas such as corridors, people expect the way ahead to be sufficiently lit and daylight-linked lighting controls can deliver excellent energy savings. This paper presents the daylighting and energy performance of an atrium space using daylight-linked lighting controls. The cost, energy and environmental issues related to various daylight illuminances are estimated and design implications are discussed

Effectiveness of daylighting design and occupant visual satisfaction in a LEED gold laboratory building

Energy Technology Data Exchange (ETDEWEB)

Hua, Ying; Oswald, Anne [Department of Design and Environmental Analysis, Cornell University, Ithaca, NY 14853 (United States); Yang, Xiaodi [School of Architecture, Carnegie Mellon University, Pittsburgh, PA 15213 (United States)

2011-01-15

Using daylight as primary light source has been widely recognized as an important strategy to reduce building energy demand and enhance indoor environment quality. However, to design and operate a building to make full use of daylight, which is a dynamic light source, to meet diverse occupant needs remains a challenge. This paper reports a post-occupancy study of the visual environment in a laboratory building on a university campus, and puts a spotlight on the building occupants as it examines the effectiveness of the daylighting design and systems integration in creating a visual environment to support occupant comfort and satisfaction while reducing artificial lighting demand. Results show generally high satisfaction with daylit work environment and positive effect of the horizontal shading strategy. Issues about the integration between daylighting and electric lighting systems and level of occupant control are identified and discussed for improving the effectiveness of daylighting and enhancing the quality of the visual environment in the building of study. A multiple-tool methodology is developed and tested, which included occupant surveys, interviews, illuminance measurements, continuous data loggers, fisheye-lens camera and glare-identifying software, and documentation of spatial settings, systems features, and user behavior. (author)

Daylighting, Space, and Architecture: A Literature Review

Directory of Open Access Journals (Sweden)

Dalia Hafiz

2015-12-01

Full Text Available Daylighting dynamism and constant change can characterize buildings and spaces with a living quality that cannot be achieved with any other design element. However, daylighting can create unwanted lighting conditions in the visual field causing discomfort and glare. This may affect the performance of building occupants such as workers or students. Consequently, designing for daylighting needs a good understanding of daylighting. Designers can rely on information from simulation software to re-imagine the space, especially to examine possible unexpected visual discomfort conditions.This paper aims to represent different visual comfort evaluation methods that can help decision-makers make better informed decisions. Different definitions and structures associated with daylight and glare are examined. It also presents a review of the literature of previous research conducted on daylighting, visual comfort analysis and glare studies.

A review of daylight illuminance determinations and energy implications

Energy Technology Data Exchange (ETDEWEB)

Li, Danny H.W. [Building Energy Research Group, Department of Building and Construction, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong SAR (China)

2010-07-15

Daylighting is recognized as an important element in architecture and a useful strategy in energy-efficient building designs. Daylight gives a sense of cheeriness and brightness that can have a significant positive impact on the people. There is a scope for integrating daylight with electric light to reduce building energy use. The amount of daylight entering a building is mainly through window openings, which create in the indoor environment a more attractive and pleasing atmosphere, in addition to maximise visual access to the pleasant views of the outside world. Determinations of the exterior and interior daylight and lighting energy savings are key issues to demonstrate the benefits based on daylighting designs. This paper provides a review of daylight illuminance determinations and the lighting energy reductions due to daylighting schemes. The study includes daylight measurements, prediction of daylight illuminance under various sky conditions and potential electric lighting energy savings from daylight-linked lighting controls. The article aims at providing building professionals, practitioners and researchers more information and a better understanding of daylight for promoting effective daylighting designs and evaluations. (author)

An Exploration into Integrating Daylight and Artificial Light via an Observational Instrument

DEFF Research Database (Denmark)

Petersen, Kjell Yngve; Søndergaard, Karin

2015-01-01

An Exploration into Integrating Daylight and Artificial Light via an Observational Instrument Daylight is dynamic and dependent upon weather conditions; unfolding with both subtle and dramatic variations in qualities of light. Through a building’s apertures, daylight creates a connection between...... abstract and blurred phenomena, these diffused luminous reflections rouse us into interactions with the world. In this book we are interested in identifying the qualitative parameters involved in the integration of dynamic artificial lighting and daylight; the latter being already highly dynamic by nature...... that examine how the dynamic artificial lighting in the observational instrument unfolds during the changing of the daylight situations that are generated by the weather outside. This research employs the concept of coupling between interior and exterior, in order to identify a spectrum of design parameters...

Evaluation of daylight intensity for sustainbility in residential buildings in cantonment cottages multan

International Nuclear Information System (INIS)

Yousuf, S.; Maqsood, S.

2017-01-01

Day lighting is a useful and effective source of energy savings and visual comforts in buildings. Occupants expect good daylight in their living spaces for better living environment. The quality and quantity of natural light entering in to a building depend on both internal and external factors. Daylight strategies basically depend on the accessibility of natural light that is determined by the latitude of the building site and the conditions surrounding the building. Daylight provides lighting energy and energy demand reduction during peak utility hours. Bringing daylight into a building that displaces electric lighting and provides sufficient illumination is the greenest way to light a building presently. This research, aims at analyzing the daylight intensity in residential buildings in Cantonment Cottages Multan which is one of the hottest and progresse city of Pakistan. The intensity of daylight can be expressed in the terms of luminance and daylight factor. In this research, the 5 and 7 marla houses in Cantt Cottages in Multan were selected. The device lux meter was used for measuring intensity with which the brightness appears to the human eye. The readings were taken by placing Lux Meter at the center and near windows in each building component at 2-4 pm. In order to evaluate the daylight intensity, the measured luminance in each component of building is compared with the standard illuminance as per recommendation of CIBSE (Chartered Institute of Building Service Engineers). After investigation, it has been found that daylight factor is much higher than the standard values as per recommended by CIBSE. The design parameters including building orientation, glazing area, room size to window opening ratio etc. is not appropriate with respect to sustainable design. (author)

Daylight Influence on Colour Design : Empirical Study on Perceived Colour and Colour Experience Indoors

OpenAIRE

Hårleman, Maud

2007-01-01

It is known that one and the same interior colouring will appear different in rooms with windows facing north or facing south, but it is not known how natural daylight from these two compass points affects perceived colour and the ways in which colour is experienced. The objective is to describe the perceived colours to be expected in rooms with sunlight and diffused light, and thus develop a tool for colour design. Two empirical investigations provide the basis for six attached papers. The m...

Evaluation of Daylight Availability for Energy Savings

Directory of Open Access Journals (Sweden)

Laura Bellia

2015-06-01

Full Text Available Dynamic daylight simulations are very useful instruments in daylighting design process. They allow an in depth analysis of indoor daylight availability levels and define if they are adequate to perform a particular visual task. Their results can be used to design shading devices or lighting control systems and compare different technical solutions. The use of these simulations is likely to spread in the common design practice since some regulations and green building rating systems suggest their use. This paper presents dynamic daylight simulation results related to an open-plan office, performed with Autodesk 3ds Max Design®, which is a calculation software validated by recent researches. It is not used in academic context but it is very widespread between technicians for photorenderings production purposes. The goal of this research is to demonstrate the functionality of this software also in dynamic daylight simulations field and propose an analysis' methodology to use it.

New tools for the evaluation of daylighting strategies and technologies

Energy Technology Data Exchange (ETDEWEB)

Papamichael, K.; Hitchcock, R.; Ehrlich, C.; Carroll, B.

1998-03-01

The use of daylight for the illumination of building interiors has the potential to enhance the quality of the environment while providing opportunities to save energy by replacing or supplementing electric lighting. Moreover, it has the potential to reduce heating and cooling loads, which offer additional energy saving opportunities as well as reductions in HVAC equipment sizing and cost. All of these benefits, however, assume proper use of daylighting strategies and technologies, whose performance depends on the context of their application. On the other hand, improper use can have significant negative effects on both comfort and energy requirements, such as increased glare and cooling loads. To ensure proper use, designers need design tools that model the dynamic nature of daylight and accurately predict performance with respect to a multitude of performance criteria, extending beyond comfort and energy to include aesthetics, cost, security, safety, etc.

Refractive integrated nonimaging solar collectors design and analysis of a novel solar-daylighting-technology

OpenAIRE

Pelegrini, Alexandre Vieira

2009-01-01

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University. A novel and original category of low-cost static solar-daylighting-collectors named Keywo solar energy, solar collectors, daylighting systems, nonimaging optics, Refractive Integrated Nonimaging Solar Collectors (RINSC) has been designed and thoroughly tested. The RINSC category is based on nonimaging optics and integrates several optical elements, such as prismatic arrays and light guides, i...

Apolux : an innovative computer code for daylight design and analysis in architecture and urbanism

Energy Technology Data Exchange (ETDEWEB)

Claro, A.; Pereira, F.O.R.; Ledo, R.Z. [Santa Catarina Federal Univ., Florianopolis, SC (Brazil)

2005-07-01

The main capabilities of a new computer program for calculating and analyzing daylighting in architectural space were discussed. Apolux 1.0 was designed to use three-dimensional files generated in graphic editors in the data exchange file (DXF) format and was developed to integrate an architect's design characteristics. An example of its use in a design context development was presented. The program offers fast and flexible manipulation of video card models in different visualization conditions. The algorithm for working with the physics of light is based on the radiosity method representing the surfaces through finite elements divided in small triangular units of area which are fully confronted to each other. The form factors of each triangle are determined in relation to all others in the primary calculation. Visible directions of the sky are also included according to the modular units of a subdivided globe. Following these primary calculations, the different and successive daylighting solutions can be determined under different sky conditions. The program can also change the properties of the materials to quickly recalculate the solutions. The program has been applied in an office building in Florianopolis, Brazil. The four stages of design include initial discussion with the architects about the conceptual possibilities; development of a comparative study based on 2 architectural designs with different conceptual elements regarding daylighting exploitation in order to compare internal daylighting levels and distribution of the 2 options exposed to the same external conditions; study the solar shading devices for specific facades; and, simulations to test the performance of different designs. The program has proven to be very flexible with reliable results. It has the possibility of incorporating situations of the real sky through the input of the Spherical model of real sky luminance values. 3 refs., 14 figs.

Optimal sun-shading design for enhanced daylight illumination of subtropical classrooms

Energy Technology Data Exchange (ETDEWEB)

Ho, Ming-Chin [Architecture and Building Research Institute, MOI (China); Chiang, Che-Ming [Department of Architecture, National Cheng-Kung University, Tainan 701 (China); Chou, Po-Cheng [Department of Interior Design, Shu-Te University, No. 59 Hun-Shan Road, Yenchau 82445, Kaohsiung County (China); Chang, Kuei-Feng [Department of Real Estate Management, National Pingtung Institute of Commerce (China); Lee, Chia-Yen [Department of Mechanical and Automation Engineering, Da-Yeh University, Changhua 515 (China)

2008-07-01

This study investigates the feasibility of fitting windows with sun-shadings in order to minimize the lighting power costs in daylight-illuminated classrooms lit from a single side in subtropical regions. An IES-CPC model is created of a representative classroom in Taiwan, and a series of simulations is performed to determine the average illuminance value and the uniformity of the illuminance distribution in the classroom under various lighting conditions with no sun-shadings fitted to the window. The numerical results are found to be in good agreement with the experimental measurements obtained using an array of nine-channel photometers. Having confirmed the validity of the simulation scheme, the illumination properties of four different sun-shading designs are considered. The results show that a double-layered sun-shading represents the optimal sun-shading design in terms of achieving a uniform illumination distribution within the classroom. Given appropriate physical dimensions, this daylight access device achieves the minimum illuminance requirement of 500 lx and improves the lighting uniformity ratio from 0.25-0.35 to 0.40-0.42. Furthermore, using this sun-shading device, the required illuminance ratio of 0.5 can be obtained simply by switching on one of the three rows of lights in the classroom. Accordingly, the daylight access device not only improves the illuminance conditions within the classroom, but also reduces the lighting power cost by 71.5% compared to the case where all of the lights are turned on. (author)

Method for including detailed evaluation of daylight levels in Be06

DEFF Research Database (Denmark)

Petersen, Steffen

2008-01-01

Good daylight conditions in office buildings have become an important issue due to new European regulatory demands which include energy consumption for electrical lighting in the building energy frame. Good daylight conditions in offices are thus in increased focus as an energy conserving measure....... In order to evaluate whether a certain design is good daylight design or not building designers must perform detailed evaluation of daylight levels, including the daylight performance of dynamic solar shadings, and include these in the energy performance evaluation. However, the mandatory national...... calculation tool in Denmark (Be06) for evaluating the energy performance of buildings is currently using a simple representation of available daylight in a room and simple assumptions regarding the control of shading devices. In a case example, this is leading to an overestimation of the energy consumption...

Practicality and Performance of Daylight Trough in The Tropics: A Case Study

Directory of Open Access Journals (Sweden)

Gene-Harn Lim

2016-01-01

Full Text Available The field of office daylighting is vital for both energy efficiency practice and occupants’ visual comfort. With the emergence of green building in Malaysia, building designers are exploring avenues for energy efficiency design; one common strategy is daylighting. The majority literature reviews on daylighting are skewed towards temperate or developed countries, where sky luminous condition is different from that of the Tropics. Conventional daylighting system designs redirect daylight from the envelope or atrium openings, such as light shelves. Presumed to be the pioneer daylight trough in the Tropics, this paper presents the simulated and in-situ lighting level measurements prior to occupancy. This case study presents an as-built daylight trough design which is able to daylight the office space as deep as 6 meters sufficiently. It achieves a lighting power density 1.90W/m2 and saves 39.2% of lighting energy over conventional office lighting energy. Discussed further is the practicality of working with such a system, including cost implication, return on investment and contractual challenges in reaching a consensus on the design. The results reinforce that the effectiveness of daylighting design is very dependable on the sun path and obstacles surrounding the office tower. The RADIANCE simulation correlates well to field measurement results. Further investigation into the light trough, its lighting energy savings, users’ interaction, visual comfort, and glare is still ongoing.

Daylighting and energy performance of a building for composite climate: An experimental study

OpenAIRE

Madhu Sudan; G.N. Tiwari

2016-01-01

The present study includes overall energy saving through thermal as well as daylighting for composite climate for the building known as SODHA BERS COMPLEX (SBC) situated at Varanasi, India. The building has been designed including all the passive concepts for thermal comfort as well daylighting to maximize the use of natural lighting for the occupants in day to day activities. This approach can be useful for multi-story building for rural and urban areas for both residential and commercial bu...

Balancing energy and daylighting performances for envelope design: A new index and proposition of a case study in Hong Kong

International Nuclear Information System (INIS)

Xie, Jing Chao; Xue, Peng; Mak, Cheuk Ming; Liu, Jia Ping

2017-01-01

Highlights: •Daylighting and energy performances were studied simultaneously. •Energy demands of lighting and air-conditioning systems were both included. •Luminous comfort was quantified by Ave. DA 300 with the range from 29.6% to 57.8%. •Energy Daylight Rate was proposed as a simple multi-objective optimization approach. •Optimal scenarios for all directions were tested and chosen by EDR method. -- Abstract: Being healthy and energy saving have become two important principles of building development. Daylight is an influential factor with the characteristics of both photometry and radiometry. Irradiance brings solar heat gains that transfer to building cooling load, while illuminance provides a luminous environment and affects artificial lighting system at the same time. To balance the energy and daylighting performances, it is reasonable to minimize the environmental load under moderate comfort conditions. This study first quantified luminous comfort with a dynamic daylighting metric, average daylight autonomy (Ave. DA 300 ), from a questionnaire survey and simulation work. The benchmark of this metric should range from 29.6% to 57.8% for high-rise residential buildings. With this guideline, the Hong Kong public housing units is found that part of units lack of daylight due to the high building floor and density, while some units have potential to save energy by compromising daylighting performance. Therefore, a new index, energy daylight rate (EDR), is proposed to help decide the best scenario of envelope design for both daylighting and shading purposes. The results show that opening a secondary window is an efficient way to bring more light in and lengthening overhang is an efficient way to block excessive sunlight. This method and the new index are proved to have the ability to help defining proper building envelope design at the early stage.

Solar shading for low energy use and daylight quality in offices: Simulations, measurements and design tools

Energy Technology Data Exchange (ETDEWEB)

Dubois, M.C.

2001-11-01

This thesis investigates the impact of solar shading devices on energy use and daylight quality in office rooms. The impact on energy use is analysed through computer simulations with the dynamic energy simulation program Derob-LTH while the impact on daylight quality is investigated through measurements in full-scale experimental office rooms and simulations with the program Radiance. This thesis also includes a literature review of research on solar shading as well as design tools to incorporate shading devices at an early stage in the design of buildings. This thesis indicates that, in cold countries, shading devices may provide more annual energy savings than any solar-protective (reflective, tinted) glazing and that the optimum glazing transmittance is orientation- and climate-dependent. For example, high annual energy savings are obtained on the south facade with higher transmittance glazings (compared with the east and west facade) because the potential for passive solar gain utilisation in the winter is high in comparison with the annual cooling demand. Exterior shading devices like awnings and overhangs may reduce the cooling demand dramatically but they are not suitable as daylight (glare) control devices. Devices like screens and venetian blinds are preferable because they cover the entire window area, which prevents sunlight patches in the room and the direct view of the bright sky. Screens and venetian blinds also reduce daylight in the room to levels that are suitable for computer work. However, it is essential that the screen is of a diffusing type since screens with a strong (specular) transmittance component result in poor daylight quality. The study on daylight quality also indicated that a screen transmittance of around 15 % may be optimum for a standard (3.5 by 6.0 m{sup 2}) south-oriented office room with a window covering around 25 % of the facade area (12 % of the floor area)

STUDI SIMULASI MODEL PENERANGAN ALAMI (DAYLIGHTING RUANG PADA BANGUNAN FASILITAS PENDIDIKAN TINGGI DENGAN SUPERLITE 2.0

Directory of Open Access Journals (Sweden)

Hanni Elitasari Mahaputri

2012-08-01

Full Text Available Daylight was the only efficient source of light available for building. Therefore, architecture was dominated by the goal of creating openings large enough to distribute daylight to building interiors. It is important to understand the amount of natural light penetration when outdoor obstruction are displaced in order to propose optimum external shading strategies as design solutions. This paper presents a study of the daylight factor and daylight contourt approaches and also investigates the effect of outdoor obstruction displacement on natural-light penetration of a specific room in higher-education building facility. The interior daylight illuminance data were simulated and analyzed using Superlite 2.0. The result shows that several effects of the external obstruction displacement as shading provider, depending on transmitted natural-light penetration, which determine the better consideration option in designing landscape surround building, especially in hot humid climates. Sinar matahari merupakan sumber penerangan yang efisien bagi bangunan. Tujuan utama dalam arsitektur adalah merancang bukaan pencahayaan yang cukup besar bagi bangunan untuk mendistribusikan cahaya ke bagian dalam bangunan. Sangat penting untuk mengetahui besar penetrasi penerangan alami yang masuk ke dalam ruang bila di luar bangunan diletakkan suatu halangan sebagai salah satu solusi disain dengan mengoptimalkan strategi perancangan pem­bayangan lingkungan. Makalah ini membahas tentang kajian pendekatan faktor penerangan alami (daylight factor dan koefisien penerangan alami, serta mengamati pengaruh perletakan halangan lingkungan terhadap penetrasi penerangan alami suatu ruang fasilitas pendidikan tinggi. Data illuminasi penerangan interior disimulasikan dan dianalisa menggunakan software Superlite 2.0. Hasil penelitian menunjukkan beberapa pengaruh perletakan halangan lingkungan sebagai elemen pembayangan lingkungan berkaitan dengan penetrasi cahaya alami, yang

Advanced fenestration and daylighting systems

Energy Technology Data Exchange (ETDEWEB)

McCluney, R. [Florida Solar Energy Centere, Cocoa, FL (United States)

1998-09-01

Advanced fenestration systems are new high-performance glazing and reflecting systems for otherwise conventional windows which offer specialized spectral and /or angular selectivity to provide improved illumination quantity and quality under optimal human comfort and energy conservation conditions. Advanced daylighting systems include systems manufactured by the solar lighting industry to introduce daylight into the core spaces of multi-storey buildings, spaces distant from the building envelope, or other locations where more conventional daylighting apertures cannot be placed. Details of operating, energy and illumination performance characteristics of both these systems were provided. It was concluded that solar lighting systems can effectively provide daylight illumination to interior spaces of a building that are not amenable to more conventional systems. Nevertheless, techniques need to be developed to predict the performance of such systems prior to their being built, so as to provide designers better means for justifying their use and economic viability, and to develop codes and performance standards to protect the consumer in the marketplace. 20 refs., 12 figs.

Daylight illumination-color-contrast tables for full-form objects naturally illuminated objects

CERN Document Server

Nagel, M

1978-01-01

Daylight Illumination-Color-Contrast Tables for Full-form Objects is the result of a major computational project concerning the illumination, color, and contrast conditions in naturally illuminated objects. The project from which this two-chapter book is derived is originally conceived in support of the various remote sensing and image processing activities of the Deutsche Forschungs- und Versuchsanstalt für Luft- und Raumfahrt, Oberpfaffenhofen, West Germany DFVLR, in particular, those depending on the quantitative photometric and colorimetric evaluation of photographs and other environmental

Integrated performance appraisal of Daylight-Europe case study buildings

NARCIS (Netherlands)

Hensen, J.L.M.; Clarke, J.A.; Hand, J.W.; Johnson, K.; Wittchen, K.; Madsen, C.; Compagnon, R.

1996-01-01

This paper describes the approach taken within the EC’s Daylight-Europe project to apply combined thermal/daylight simulations to existing building designs which are representative of European types and climate contexts. The outputs from the performance appraisals are then incorporated within design

Use of Daylight and Aesthetic Image of Glass Facades in Contemporary Buildings

Science.gov (United States)

Roginska-Niesluchowska, Malgorzata

2017-10-01

The paper deals with the architecture of contemporary buildings in respect to their aesthetic image created by the use of natural light. Sustainability is regarded as a governing principle of contemporary architecture, where daylighting is an important factor as it affects energy consumption and environmental quality of the space inside a building. Environmental awareness of architecture, however, involves a much wider and more holistic view of design. The quality of sustainable architecture can be considered in its aesthetic and cultural context with regard to landscape, local tradition, and connection to the surrounding world. This approach is associated with the social mission of architecture, i.e. providing appropriate space for living, facilitating social relations and having positive impact on people. The purpose of the research is to study the use of daylight in creating an aesthetic image of contemporary buildings. The author focuses mainly on public buildings largely dedicated to art and culture which satisfy high functional and aesthetic requirements. The paper examines the genesis and current trends in the aesthetic image of modern buildings which use daylight as the main design strategy, focusing on the issues of glass facades. The main attention is given to the shaping of representative public areas which feature the glass facades. The research has been based on a case study, critical review of literature review, observation and synthesis. The study identifies and classifies different approaches to using daylight in these areas and highlights changes in the aesthetics of architecture made of glass, which uses daylight as the main design strategy. These changes are primarily caused by the development and spreading of new glazing materials and the use of digital method of design. The influence of light and its mode depends on glass materials but also on the local conditions of the site, and has a significant impact on the relationship between

Daylight Design of Office Buildings: Optimisation of External Solar Shadings by Using Combined Simulation Methods

Directory of Open Access Journals (Sweden)

Javier González

2015-05-01

Full Text Available Integrating daylight and energy performance with optimization into the design process has always been a challenge for designers. Most of the building environmental performance simulation tools require a considerable amount of time and iterations for achieving accurate results. Moreover the combination of daylight and energy performances has always been an issue, as different software packages are needed to perform detailed calculations. A simplified method to overcome both issues using recent advances in software integration is explored here. As a case study; the optimization of external shadings in a typical office space in Australia is presented. Results are compared against common solutions adopted as industry standard practices. Visual comfort and energy efficiency are analysed in an integrated approach. The DIVA (Design, Iterate, Validate and Adapt plug-in for Rhinoceros/Grasshopper software is used as the main tool, given its ability to effectively calculate daylight metrics (using the Radiance/Daysim engine and energy consumption (using the EnergyPlus engine. The optimization process is carried out parametrically controlling the shadings’ geometries. Genetic Algorithms (GA embedded in the evolutionary solver Galapagos are adopted in order to achieve close to optimum results by controlling iteration parameters. The optimized result, in comparison with conventional design techniques, reveals significant enhancement of comfort levels and energy efficiency. Benefits and drawbacks of the proposed strategy are then discussed.

Capturing the Daylight Dividend

Energy Technology Data Exchange (ETDEWEB)

Peter Boyce; Claudia Hunter; Owen Howlett

2006-04-30

Capturing the Daylight Dividend conducted activities to build market demand for daylight as a means of improving indoor environmental quality, overcoming technological barriers to effective daylighting, and informing and assisting state and regional market transformation and resource acquisition program implementation efforts. The program clarified the benefits of daylight by examining whole building systems energy interactions between windows, lighting, heating, and air conditioning in daylit buildings, and daylighting's effect on the human circadian system and productivity. The project undertook work to advance photosensors, dimming systems, and ballasts, and provided technical training in specifying and operating daylighting controls in buildings. Future daylighting work is recommended in metric development, technology development, testing, training, education, and outreach.

ADASY (Active Daylighting System)

Science.gov (United States)

Vázquez-Moliní, Daniel; González-Montes, Mario; Fernández-Balbuena, Antonio Á.; Bernabéu, Eusebio; García-Botella, Ángel; García-Rodríguez, Lucas; Pohl, Wilfried

2009-08-01

The main objective of ADASY (Active Daylighting System) work is to design a façade static daylighting system oriented to office applications, mainly. The goal of the project is to save energy by guiding daylight into a building for lighting purpose. With this approach we can reduce the electrical load for artificial lighting, completing it with sustainable energy. The collector of the system is integrated on a vertical façade and its distribution guide is always horizontal inside of the false ceiling. ADASY is designed with a specific patent pending caption system, a modular light-guide and light extractor luminaire system. Special care has been put on the final cost of the system and its building integration purpose. The current ADASY configuration is able to illuminate 40 m2 area with a 300lx-400lx level in the mid time work hours; furthermore it has a good enough spatial uniformity distribution and a controlled glare. The data presented in this study are the result of simulation models and have been confirmed by a physical scaled prototype. ADASY's main advantages over regular illumination systems are: -Low maintenance; it has not mobile pieces and therefore it lasts for a long time and require little attention once installed. - No energy consumption; solar light continue working even if there has been a power outage. - High quality of light: the colour rendering of light is very high - Psychological benefits: People working with daylight get less stress and more comfort, increasing productivity. - Health benefits

Welcome to the Journal of Daylighting

Directory of Open Access Journals (Sweden)

Irfan Ullah

2014-12-01

Full Text Available I am delighted to welcome you to a newly launched Solarlits electronic journal: the Journal of Daylighting (JD. As the Editor-in-Chief of JD it is a great pleasure to introduce the inaugural issue of this new, open-access, bi-annual journal to readers, researchers, future authors, and colleagues. The decision by SolarLits to launch this new journal is very timely. Because the growth of lighting demand is increasing due to rising average illuminance levels in buildings, more attention has been paid to introduce daylighting in buildings, which will sustainably reduce the overall energy consumption in buildings. JD will serve as a new international platform for researchers to share advances in daylighting. As an international, peer-reviewed research journal it will exclusively cover the vibrant and diverse field of daylighting technologies and applications. JD will serve as an interdisciplinary forum for the scientific and research community active in daylighting and its applications. Topics will include, but not limited to: daylighting and hybrid lighting systems, lighting and daylighting simulation, lighting designs, lighting metrology and light quality, lighting control, building physics - lighting, building energy modeling, energy efficient buildings, zero-energy buildings, indoor environment quality, sustainable solar energy systems, application of solar energy sources in buildings, building-integrated photovoltaics, and solar thermal and concentrator technology. I will work with the Associate Editors, the Editorial Board, and the scientific and engineering research community to make JD a primary journal for the dissemination of breakthrough results, discussion of key challenges, and topics in daylighting. JD will publish full-length research articles, review articles, book reviews, and short communications.

Application and Computer Analysis of Solar Systems for the Indoor Daylighting

International Nuclear Information System (INIS)

Makhmudov, Is Kandar

2010-02-01

A steady increase of energy costs and ever growing environmental concerns in recent years have forced scientists to look for new methods of energy utilization. To resolve these dire problems, the application of renewable energy sources has been considered in various human activities in every sector of society. One of them is the development of solar daylighting systems for residential and commercial buildings, which can improve building energy efficiency and create comfortable indoor environment. Electric lighting represents up to 30 % of building electricity consumption. Therefore, using sunlight in indoor daylighting can significantly reduce electricity consumption in residential and commercial buildings. Moreover, daylight is an important factor in visual environment and improving human well-being. In last decades, different approaches to the design of solar daylighting systems have resulted in various innovative solutions to efficiently introduce natural light in buildings. But their efficiency and cost are still one of primary obstacles in the wider development and distribution of solar daylighting systems. In this study, we investigated the performance of a new solar concentrator system for indoor illumination. The solar concentrator system consists of 30 cm dish concentrators, high precision solar trackers, optical fibers and diffusers for a light distribution. In order to assess the daylighting system's efficiency, there were carried out several experimental measurement series. One of them was an application of our solar daylighting system to two standard classrooms with south- and north-oriented windows in Jeju city, Korea. At the same time classrooms were modeled by using ECOTECT and exported to RADIANCE for daylighting simulations. Results from the measurements and simulations were analyzed comprehensively to establish the reliability of the modeling process. Following this, we modeled both classrooms with the above mentioned daylighting systems

Application and Computer Analysis of Solar Systems for the Indoor Daylighting

Energy Technology Data Exchange (ETDEWEB)

Makhmudov, Is Kandar

2010-02-15

A steady increase of energy costs and ever growing environmental concerns in recent years have forced scientists to look for new methods of energy utilization. To resolve these dire problems, the application of renewable energy sources has been considered in various human activities in every sector of society. One of them is the development of solar daylighting systems for residential and commercial buildings, which can improve building energy efficiency and create comfortable indoor environment. Electric lighting represents up to 30 % of building electricity consumption. Therefore, using sunlight in indoor daylighting can significantly reduce electricity consumption in residential and commercial buildings. Moreover, daylight is an important factor in visual environment and improving human well-being. In last decades, different approaches to the design of solar daylighting systems have resulted in various innovative solutions to efficiently introduce natural light in buildings. But their efficiency and cost are still one of primary obstacles in the wider development and distribution of solar daylighting systems. In this study, we investigated the performance of a new solar concentrator system for indoor illumination. The solar concentrator system consists of 30 cm dish concentrators, high precision solar trackers, optical fibers and diffusers for a light distribution. In order to assess the daylighting system's efficiency, there were carried out several experimental measurement series. One of them was an application of our solar daylighting system to two standard classrooms with south- and north-oriented windows in Jeju city, Korea. At the same time classrooms were modeled by using ECOTECT and exported to RADIANCE for daylighting simulations. Results from the measurements and simulations were analyzed comprehensively to establish the reliability of the modeling process. Following this, we modeled both classrooms with the above mentioned daylighting systems

Daylight and energy implications for CIE standard skies

International Nuclear Information System (INIS)

Li, Danny H.W.

2007-01-01

Recently, the International Commission on Illumination (CIE) has adopted a range of 15 standard skies, which include the existing CIE overcast, very clear and cloudless polluted skies, covering the whole probable spectrum of usual skies found in the world. The traditional daylight factor (DF) approach with the calculations being based on an isotropic overcast sky, however, cannot cater to the dynamic variations in daylight luminance and illuminance as the sun's position changes under non-overcast skies. Currently, we propose a numerical procedure that considers the changes in the luminance of sky elements to predict the interior daylight illuminance under the 15 CIE standard skies. This paper evaluates the method by using a typical room with a large vertical glazing window facing north. The available daylight for the room at mean hourly sun positions in each month in terms of DF and illuminance levels were determined and compared with those based on a computer program, namely, RADIANCE. A modification to the ground reflected component was made when a well defined shadow was cast in front of the window facade. It is shown that the results estimated by the proposed approach are in reasonably good agreement with those produced from RADIANCE. The interior daylight and lighting energy consumption were also determined using the proposed and the traditional DF approaches. The findings reveal that daylighting designs using existing CIE overcast sky only would considerably underestimate the indoor daylight availability and electric lighting energy savings, especially under high design indoor illuminance settings

Daylight calculations in practice

DEFF Research Database (Denmark)

Iversen, Anne; Roy, Nicolas; Hvass, Mette

The aim of the project was to obtain a better understanding of what daylight calculations show and also to gain knowledge of how the different daylight simulation programs perform compared with each other. Experience has shown that results for the same room, obtained from two daylight simulation...... programs can give different results. This can be due to restrictions in the program itself and/or be due to the skills of the persons setting up the models. This is crucial as daylight calculations are used to document that the demands and recommendations to daylight levels outlined by building authorities....... The aim of the project was to obtain a better understanding of what daylight calculations show and also to gain knowledge of how the different daylight simulation programs perform compared with each other. Furthermore the aim was to provide knowledge of how to build up the 3D models that were...

Estimation of exterior vertical daylight for the humid tropic of Kota Kinabalu city in East Malaysia

Energy Technology Data Exchange (ETDEWEB)

Djamila, Harimi; Ming, Chu Chi; Kumaresan, Sivakumar [School of Engineering and Information Technology, Universiti Malaysia Sabah, Locked Bag No. 2073, 88999 Kota Kinabalu, Sabah (Malaysia)

2011-01-15

In tropical regions natural daylight has been a fundamental factor in building design. It is the most efficient way of lighting a building in the daytime and has a great potential for energy conservation in buildings. In Malaysia there are a limited available data of measured illuminance which is the case of several regions in the tropics. Using established models it is possible to predict the luminous efficacy and then estimate the monthly mean hourly exterior illuminance. In this study two different models were chosen. The Perez and Du Mortier-Perraudeau-Page-Littlefair models were selected for the prediction of hourly exterior horizontal illuminance for the city of Kota Kinabalu in East Malaysia. Comparison between the two models were made. The vertical hourly illuminance was predicted also using Perez approach. The potentiality of daylight in four orientations was discussed. This study highlights the importance of Sunpath diagram on daylight illuminance during the conceptual design stage. The results in this study is hoped to contribute further insight into the potentiality of daylighting of tropical sky. (author)

From dark to bright: novel daylighting applications in solid state lighting

Science.gov (United States)

Adler, Helmar G.

2011-10-01

The term "daylighting" is used in various ways, on one hand in a more architectural sense, i.e. using existing daylight to illuminate spaces, and on the other, more recently, for using light sources to replicate daylight. The emergence of solid state lighting (SSL) opens up a large number of new avenues for daylighting. SSL allows innovative controllability of intensity and color for artificial light sources that can be advantageously applied to daylighting. With the assistance of these new technologies the combination of natural and artificial lighting could lead to improvements in energy savings and comfort of living beings. Thus it is imperative to revisit or even improve daylighting research so that building networks of the future with their sensor, energy (e.g. HVAC) and lighting requirements can benefit from the emerging capabilities. This paper will briefly review existing daylighting concepts and technology and discuss new ideas. An example of a tunable multi-color SSL system will be shown.

Integration Issues for Using Innovative Daylighting Strategies in Light Wells

Directory of Open Access Journals (Sweden)

Gashinani M. Gholipour

2017-12-01

Full Text Available “Light well” as one of the most common means of daylight tolls in building, experiences severe limitations and deserve special attention. The question is which strategy is the best for increasing the daylight penetration to the depth of buildings. One of the main challenges in deep plan is to guide daylight into the building core and this can be performed through daylighting strategies, but the choice of the proper innovative daylighting system (IDS with several parameters is the problem. This paper aims to find elements for optimal choice and selecting context-compatible tools for light well. The result shows that four macro factors were found at the interaction of building and IDS. Identifying the integration components can play an effective role in decision-making or design a new tolls consistent with the physical conditions of light well and building to overcome the daylight crisis.

Evaluation of Daylight Intensity for Sustainbility in Residential Buildings in Cantonment Cottages Multan

Directory of Open Access Journals (Sweden)

SUMRA YOUSUF

2017-07-01

Full Text Available Day lighting is a useful and effective source of energy savings and visual comforts in buildings. Occupants expect good daylight in their living spaces for better living environment. The quality and quantity of natural light entering in to a building depend on both internal and external factors. Daylight strategies basically depend on the accessibility of natural light that is determined by the latitude of the building site and the conditions surrounding the building. Daylight provides lighting energy and energy demand reduction during peak utility hours. Bringing daylight into a building that displaces electric lighting and provides sufficient illumination is the greenest way to light a building presently. This research, aims at analyzing the daylight intensity in residential buildings in Cantonment Cottages Multan which is one of the hottest and progresse city of Pakistan. The intensity of daylight can be expressed in the terms of luminance and daylight factor. In this research, the 5 and 7 marla houses in Cantt Cottages in Multan were selected. The device lux meter was used for measuring intensity with which the brightness appears to the human eye. The readings were taken by placing Lux Meter at the center and near windows in each building component at 2-4 pm. Inorderto evaluate the daylight intensity, the measured luminance in each component of building is compared with the standard illuminance as per recommendation of CIBSE (Chartered Institute of Building Service Engineers. After investigation, it has been found that daylight factor is much higher than the standard values

Investigating the Influence of Light Shelf Geometry Parameters on Daylight Performance and Visual Comfort, a Case Study of Educational Space in Tehran, Iran

Directory of Open Access Journals (Sweden)

Mohammad Hossein Moazzeni

2016-07-01

Full Text Available Daylight can be considered as one of the most important principles of sustainable architecture. It is unfortunate that this is neglected by designers in Tehran, a city that benefits from a significant amount of daylight and many clear sunny days during the year. Using a daylight controller system increases space natural light quality and decreases building lighting consumption by 60%. It also affects building thermal behavior, because most of them operate as shading. The light shelf is one of the passive systems for controlling daylight, mostly used with shading and installed in the upper half of the windows above eye level. The influence of light shelf parameters, such as its dimensions, shelf rotation angle and orientation on daylight efficiency and visual comfort in educational spaces is investigated in this article. Daylight simulation software and annual analysis based on climate information during space occupation hours were used. The results show that light shelf dimensions, as well as different orientations, especially in southern part, are influential in the distribution of natural light and visual comfort. At the southern orientation, increased light shelf dimensions result in an increase of the area of the work plane with suitable daylight levels by 2%–40% and a significant decrease in disturbing and intolerable glare hours.

Impacts of orientation on daylighting in high-rise office buildings in Malaysia

Directory of Open Access Journals (Sweden)

AbdolHamid Mahdavi

2015-12-01

Full Text Available Orientation is one of the important factors in building design to use daylight and ‎conserve energy. Well-orientated buildings maximise daylight reception through ‎building facades and reduce the need for artificial lighting. Reasonable daylighting usage in office buildings is an important part of an architect’s designing process, which leads to lesser electricity consumption as well as providing a visual and thermal comfort for the occupants. Orientation is an important factor in passive design strategies. This paper focuses on the orientation effect on daylighting into office rooms. The research method of this study was simulation which is performed on a hypothetical model on a 25 storey high-rise office building in Malaysia. All simulations were carried out in the IES-VE software that uses RADIANCE program for illuminance calculations. To evaluate the daylight in various conditions, a new index SAZ was introduced which assesses daylight factor (DF and absolute Lux. Results showed similar SAZ in CIE overcast sky in various orientations; whereas, in sunny sky due to sun path in Malaysia, different results showed northern and southern rooms have the best illuminance distribution. However, the similar window form and size in four orientations lead to more energy consumption for artificial lighting and cooling loads.

Design methodology and criteria for daylight and thermal comfort in nearly-zero energy office buildings in Nordic climate

DEFF Research Database (Denmark)

Karlsen, Line Røseth

The objective of this PhD thesis was to arrange for an integrated building design with respect to thermal comfort, daylighting and energy use, applicable for office buildings in Nordic climate. In order to achieve this, it is suggested that modelling of mean radiant temperature (MRT) should...... into the simulation tool IDA ICE. Furthermore, the control of solar shading is given attention, since it is a crucial link between the thermal and daylighting performance. The thesis presents results of an occupant survey with 46 subjects, which was carried out to investigate occupants’ preferences towards...

Daylight photodynamic therapy for actinic keratosis

DEFF Research Database (Denmark)

Wiegell, Stine; Wulf, H C; Szeimies, R-M

2011-01-01

clinic visits and discomfort during therapy. In this article, we critically review daylight-mediated PDT, which is a simpler and more tolerable treatment procedure for PDT. We review the effective light dose, efficacy and safety, the need for prior application of sunscreen, and potential clinical scope...... of daylight-PDT. Three randomized controlled studies have shown that daylight-mediated PDT is an effective treatment of thin AKs. Daylight-mediated PDT is nearly pain-free and more convenient for both the clinics and patients. Daylight-mediated PDT is especially suited for patients with large field......-cancerized areas, which can easily be exposed to daylight. Further investigations are necessary to determine at which time of the year and in which weather conditions daylight-mediated PDT will be possible in different geographical locations....

Hardware-in-the-Loop Modeling and Simulation Methods for Daylight Systems in Buildings

Science.gov (United States)

Mead, Alex Robert

This dissertation introduces hardware-in-the-loop modeling and simulation techniques to the daylighting community, with specific application to complex fenestration systems. No such application of this class of techniques, optimally combining mathematical-modeling and physical-modeling experimentation, is known to the author previously in the literature. Daylighting systems in buildings have a large impact on both the energy usage of a building as well as the occupant experience within a space. As such, a renewed interest has been placed on designing and constructing buildings with an emphasis on daylighting in recent times as part of the "green movement.''. Within daylighting systems, a specific subclass of building envelope is receiving much attention: complex fenestration systems (CFSs). CFSs are unique as compared to regular fenestration systems (e.g. glazing) in the regard that they allow for non-specular transmission of daylight into a space. This non-specular nature can be leveraged by designers to "optimize'' the times of the day and the days of the year that daylight enters a space. Examples of CFSs include: Venetian blinds, woven fabric shades, and prismatic window coatings. In order to leverage the non-specular transmission properties of CFSs, however, engineering analysis techniques capable of faithfully representing the physics of these systems are needed. Traditionally, the analysis techniques available to the daylighting community fall broadly into three classes: simplified techniques, mathematical-modeling and simulation, and physical-modeling and experimentation. Simplified techniques use "rules-of-thumb'' heuristics to provide insights for simple daylighting systems. Mathematical-modeling and simulation use complex numerical models to provide more detailed insights into system performance. Finally, physical-models can be instrumented and excited using artificial and natural light sources to provide performance insight into a daylighting system

Modeling daylight from solar irradiation in Malaysia

International Nuclear Information System (INIS)

Ahmed, A.Z.; Sayigh, A.A.K.; Surendran, P.N.; Othman, M.Y.

1999-01-01

The oil crises in the seventies, the environmental impact by the extensive use of energy in the nineties and the recent economic recession in Asia have led to the rediscovery of the use of daylight in energy-conscious design in buildings, the economic implication of the excessive use of artificial lighting in potential of daylight. No daylight data is currently available in Malaysia and therefore there is a need to model the daylight availability based on other climatic parameters measured at meteorological stations. A study has been carried out to produce daylight data from measured climatic parameters, specifically solar irradiation and could cover. The Model Year Climate (MYC) data for the location of Subang (3 deg. 7', N 101 deg. 33' E), model to estimate daily diffuse irradiation was produced the average values of global (KG) and diffuse (KD) luminous efficacious were calculated and found to be 112 lm/W and 120 lm/W respectively. The value of 104 lm/W for the beam luminous efficacy (KB) was selected. Using cloud data cover data as input parameters, the nebulosity index was calculated to determine the sky condition in Subang, Malaysia, which was then classified as average or intermediate sky type, the hourly illuminance on horizontal and inclined surfaces at locations with similar sky conditions in Malaysia were then produced. (author)

IEA Task 31. Daylighting Buildings in the 21{sup st} Century

Energy Technology Data Exchange (ETDEWEB)

Scartezzini, J.-L.; Morel, N.; Andersen, M.; Lindelhoef, D.

2006-02-15

This report for the Swiss Federal Office of Energy (SFOE) takes a look at work being carried out within the framework of the International Energy Agency's Solar Heating and Cooling Programme, Task 31 concerning the daylighting of buildings. Research activities in the task's four subtasks, user perspectives and requirements, integration and optimisation of daylighting systems, daylighting design tools and performance tracking network and design support groups are reported on. Objectives, projects and outcomes of each subtask are presented. Swiss contributions to the work done in these subtasks are reviewed and main achievements due to Swiss contributions are listed. Practical examples are quoted.

Daylighting simulation: methods, algorithms, and resources

Energy Technology Data Exchange (ETDEWEB)

Carroll, William L.

1999-12-01

This document presents work conducted as part of Subtask C, ''Daylighting Design Tools'', Subgroup C2, ''New Daylight Algorithms'', of the IEA SHC Task 21 and the ECBCS Program Annex 29 ''Daylight in Buildings''. The search for and collection of daylighting analysis methods and algorithms led to two important observations. First, there is a wide range of needs for different types of methods to produce a complete analysis tool. These include: Geometry; Light modeling; Characterization of the natural illumination resource; Materials and components properties, representations; and Usability issues (interfaces, interoperability, representation of analysis results, etc). Second, very advantageously, there have been rapid advances in many basic methods in these areas, due to other forces. They are in part driven by: The commercial computer graphics community (commerce, entertainment); The lighting industry; Architectural rendering and visualization for projects; and Academia: Course materials, research. This has led to a very rich set of information resources that have direct applicability to the small daylighting analysis community. Furthermore, much of this information is in fact available online. Because much of the information about methods and algorithms is now online, an innovative reporting strategy was used: the core formats are electronic, and used to produce a printed form only secondarily. The electronic forms include both online WWW pages and a downloadable .PDF file with the same appearance and content. Both electronic forms include live primary and indirect links to actual information sources on the WWW. In most cases, little additional commentary is provided regarding the information links or citations that are provided. This in turn allows the report to be very concise. The links are expected speak for themselves. The report consists of only about 10+ pages, with about 100+ primary links, but

Daylighting on the working plane in oriented attic rooms under overcast and clear sky

Directory of Open Access Journals (Sweden)

Kondáš Kristián

2014-06-01

Full Text Available The evaluation of daylight conditions in building interiors is based on the Daylight Factor concept after current Slovak standards. Criteria and requirements determined in these standards consider the worst daylight exterior conditions which are described by CIE overcast sky model. The sky luminance distribution of overcast sky is centrical to the zenith, so independence of window orientation to cardinal points is characteristic in daylighting calculations. The sky luminance distribution modelling is one of the main task of the daylight source research more than 50 years. It is evident that also other types of sky conditions exist in nature. An introduction of a new criterion based on photometric variables, which also consider sunlight influence, is expected. This article represents a study of the influence of the interior orientation on distribution of daylighting in attic spaces under an overcast and clear sky

Impact of façade window design on energy, daylighting and thermal comfort in nearly zero-energy houses

DEFF Research Database (Denmark)

Vanhoutteghem, Lies; Skarning, Gunnlaug Cecilie Jensen; Hviid, Christian Anker

2015-01-01

a solution space defined by targets for daylighting and thermal comfort. In contrast with existing guidelines, the results show an upper limit for energy savings and utilisation of solar gains in south-oriented rooms. Instead, low U-values are needed in both north- and south oriented rooms before large......Appropriate window solutions are decisive for the design of 'nearly zero-energy' buildings with healthy and comfortable indoor environment. This paper focuses on the relationship between size, orientation and glazing properties of façade windows for different side-lit room geometries in Danish...... 'nearly zero-energy' houses. The effect of these parameters on space heating demand, daylighting and thermal environment is evaluated by means of EnergyPlus and DAYSIM and presented in charts illustrating how combinations of design parameters with minimum space heating demand can be selected within...

Multiobjective generalized extremal optimization algorithm for simulation of daylight illuminants

Science.gov (United States)

Kumar, Srividya Ravindra; Kurian, Ciji Pearl; Gomes-Borges, Marcos Eduardo

2017-10-01

Daylight illuminants are widely used as references for color quality testing and optical vision testing applications. Presently used daylight simulators make use of fluorescent bulbs that are not tunable and occupy more space inside the quality testing chambers. By designing a spectrally tunable LED light source with an optimal number of LEDs, cost, space, and energy can be saved. This paper describes an application of the generalized extremal optimization (GEO) algorithm for selection of the appropriate quantity and quality of LEDs that compose the light source. The multiobjective approach of this algorithm tries to get the best spectral simulation with minimum fitness error toward the target spectrum, correlated color temperature (CCT) the same as the target spectrum, high color rendering index (CRI), and luminous flux as required for testing applications. GEO is a global search algorithm based on phenomena of natural evolution and is especially designed to be used in complex optimization problems. Several simulations have been conducted to validate the performance of the algorithm. The methodology applied to model the LEDs, together with the theoretical basis for CCT and CRI calculation, is presented in this paper. A comparative result analysis of M-GEO evolutionary algorithm with the Levenberg-Marquardt conventional deterministic algorithm is also presented.

NOUR. Daylighting and thermal effects of windows in desert houses

Energy Technology Data Exchange (ETDEWEB)

Ouahrani, Djamel

1999-07-01

This study is on a combined effect of window, the daylighting and the thermal effects, in desert houses. It is comprised of two complementary studies. In the introduction a historical review on the development of using daylight has been carried out in order to place the case study in a historical perspective. The first study is comprehensive and contains two main parts. In the first part a study was carried out on the people and history of the town of Ghardaia in Southern Algeria. This was done in order to understand the architectural form of that region. The second part is experimental and consists of two field studies carried out in Ghardaia. Their aim was to investigate the influence of daylight and temperature on the use of residential houses. This investigation included both traditional and 'modern' houses, the modern having relatively large windows similar to those of the northern part of Algeria, the traditional ones having small or no windows. The second study is also experimental consisting of computer parametric studies on window design from two standpoints, namely daylighting level and thermal effects of windows in desert houses. A typical traditional house is described as it was observed. Then the recorded light values are presented and commented upon. In the second part, three types of modern houses observed in the field studies are presented and compared to the traditional archetype. The comparison especially dwells on the relative effectiveness of the two systems of daylighting. In the third part, focusing on various issues of lighting, the results of interviews with the inhabitants are presented. The historical studies indicate that the process of housing development, in several respects, has reached a certain quality (social, technology, and adaptation to climate) appropriate to the local original context, but that development has slowed down. The results of the lighting study indicate that the use of more windows in modern houses

NOUR. Daylighting and thermal effects of windows in desert houses

Energy Technology Data Exchange (ETDEWEB)

Ouahrani, Djamel

1999-07-01

This study is on a combined effect of window, the daylighting and the thermal effects, in desert houses. It is comprised of two complementary studies. In the introduction a historical review on the development of using daylight has been carried out in order to place the case study in a historical perspective. The first study is comprehensive and contains two main parts. In the first part a study was carried out on the people and history of the town of Ghardaia in Southern Algeria. This was done in order to understand the architectural form of that region. The second part is experimental and consists of two field studies carried out in Ghardaia. Their aim was to investigate the influence of daylight and temperature on the use of residential houses. This investigation included both traditional and 'modern' houses, the modern having relatively large windows similar to those of the northern part of Algeria, the traditional ones having small or no windows. The second study is also experimental consisting of computer parametric studies on window design from two standpoints, namely daylighting level and thermal effects of windows in desert houses. A typical traditional house is described as it was observed. Then the recorded light values are presented and commented upon. In the second part, three types of modern houses observed in the field studies are presented and compared to the traditional archetype. The comparison especially dwells on the relative effectiveness of the two systems of daylighting. In the third part, focusing on various issues of lighting, the results of interviews with the inhabitants are presented. The historical studies indicate that the process of housing development, in several respects, has reached a certain quality (social, technology, and adaptation to climate) appropriate to the local original context, but that development has slowed down. The results of the lighting study indicate that the use of more windows in modern houses constitutes a

External perforated Solar Screens for daylighting in residential desert buildings: Identification of minimum perforation percentages

KAUST Repository

Sherif, Ahmed

2012-06-01

The desert climate is endowed by clear sky conditions, providing an excellent opportunity for optimum utilization of natural light in daylighting building indoor spaces. However, the sunny conditions of the desert skies, in countries like Egypt and Saudi Arabia, result in the admittance of direct solar radiation, which leads to thermal discomfort and the incidence of undesired glare. One type of shading systems that is used to permit daylight while controlling solar penetration is " Solar Screens" Very little research work addressed different design aspects of external Solar Screens and their influence on daylighting performance, especially in desert conditions, although these screens proved their effectiveness in controlling solar radiation in traditional buildings throughout history.This paper reports on the outcomes of an investigation that studied the influence of perforation percentage of Solar Screens on daylighting performance in a typical residential living room of a building in a desert location. The objective was to identify minimum perforation percentage of screen openings that provides adequate illuminance levels in design-specific cases and all-year-round.Research work was divided into three stages. Stage one focused on the analysis of daylighting illuminance levels in specific dates and times, while the second stage was built on the results of the first stage, and addressed year round performance using Dynamic Daylight Performance Metrics (DDPMs). The third stage addressed the possibility of incidence of glare in specific cases where illuminance levels where found very high in some specific points during the analysis of first stage. The research examined the daylighting performance in an indoor space with a number of assumed fixed experimentation parameters that were chosen to represent the principal features of a typical residential living room located in a desert environment setting.Stage one experiments demonstrated that the screens fulfilled the

Weather conditions and daylight-mediated photodynamic therapy

DEFF Research Database (Denmark)

Wiegell, S R; Fabricius, S; Heydenreich, J

2013-01-01

Photodynamic therapy (PDT) is an attractive therapy for nonmelanoma skin cancers and actinic keratoses (AKs). Daylight-mediated methyl aminolaevulinate PDT (daylight-PDT) is a simple and painless treatment procedure for PDT. All daylight-PDT studies have been performed in the Nordic countries...

Daylighting and energy performance of a building for composite climate: An experimental study

Directory of Open Access Journals (Sweden)

Madhu Sudan

2016-12-01

Full Text Available The present study includes overall energy saving through thermal as well as daylighting for composite climate for the building known as SODHA BERS COMPLEX (SBC situated at Varanasi, India. The building has been designed including all the passive concepts for thermal comfort as well daylighting to maximize the use of natural lighting for the occupants in day to day activities. This approach can be useful for multi-story building for rural and urban areas for both residential and commercial buildings. The energy saving potential and corresponding CO2 mitigation have been determined for different lifetimes of the building. The energy matrices namely energy payback time (EPBT, energy production factor (EPF and life cycle conversion efficiency (LCCE of the building have also been estimated by considering overall energy saving. An annual energy saving has been obtained as 3675.61 kW h due to daylight concept by considering different Zones in each floors of the building. Further, the EPBT has been determined as 49.25 years and 34.73 years for average 4 °C and 6 °C temperature difference between ambient and room, respectively. It has been found that when thermal heat gain increases in the building LCCE and EPF increase.

Estimation of luminous efficacy of daylight and illuminance for composite climate

Energy Technology Data Exchange (ETDEWEB)

Ahmad, Jamil M.; Tiwari, G.N. [Center for Energy Studies, Indian Institute of Technology, Hauz Khas, New Delhi-16 (India)

2010-07-01

This Daylighting is one of the basic components of passive solar building design and its estimation is essential. In India there are a few available data of measured illuminance as in many regions of the world. The Indian climate is generally clear with overcast conditions prevailing through the months of July to September, which provides good potential to daylighting in buildings. Therefore, an analytical model that would encompass the weather conditions of New Delhi was selected. Hourly exterior horizontal and slope daylight availability has been estimated for New Delhi using daylight modeling techniques based on solar radiation data. A model to estimate interior illuminance was investigated and validated using experimental hourly inside illuminance data of an existing skylight integrated vault roof mud house in composite climate of New Delhi. The interior illuminance model was found in good agreement with experimental value of interior illuminance.

Could Daylight Glare Be Defined Mathematically?Results of Testing the DGIN Method in Japan

Science.gov (United States)

Nazzal, Ali; Oki, Masato

Discomfort glare from daylight is a common problem without valid prediction methods so far. A new mathematical DGIN (New Daylight Glare Index) method tries to respond the challenge. This paper reports on experiments carried out in daylit office environment in Japan to test applicability of the method. Slight positive correlation was found between the DGIN and the subjective evaluation. Additionally, a high Ladaptation value together with the small ratio of Lwindow to Ladaptation was obviously experienced sufficient to neutralize the effect of glare discomfort. However, subjective assessments are poor glare indicators and not reliable in testing glare prediction methods. DGIN is a good indicator of daylight glare, and when the DGIN value is analyzed together with the measured illuminance ratios, discomfort glare from daylight can be analyzed in a quantitative manner. The DGIN method could serve architects and lighting designers in testing daylighting systems, and also guide the action of daylight responsive lighting controls.

The New York Times headquarters daylighting mockup: Monitoredperformance of the daylighting control system

Energy Technology Data Exchange (ETDEWEB)

Lee, Eleanor S.; Selkowitz, Stephen E.

2006-02-24

A nine-month monitored field study of the performance of automated roller shades and daylighting controls was conducted in a 401 m{sup 2} unoccupied, furnished daylighting mockup. The mockup mimicked the southwest corner of a new 110 km{sub 2} commercial building in New York, New York, where The New York Times will be the major tenant. This paper focuses on evaluating the performance of two daylighting control systems installed in separate areas of an open plan office with 1.2-m high workstation partitions: (1) Area A had 0-10 V dimmable ballasts with an open-loop proportional control system and an automated shade controlled to reduce window glare and increase daylight, and (2) Area B had digital addressable lighting interface (DALI) ballasts with a closed-loop integral reset control system and an automated shade controlled to block direct sun. Daylighting control system performance and lighting energy use were monitored. The daylighting control systems demonstrated very reliable performance after they were commissioned properly. Work plane illuminance levels were maintained above 90% of the maximum fluorescent illuminance level for 99.9{+-}0.5% and 97.9{+-}6.1% of the day on average over the monitored period, respectively, in Areas A and B. Daily lighting energy use savings were significant in both Areas over the equinox-to-equinox period compared to a non-daylit reference case. At 3.35 m from the window, 30% average savings were achieved with a sidelit west-facing condition in Area A while 50-60% were achieved with a bilateral daylit south-facing condition in Area B. At 4.57-9.14 m from the window, 5-10% and 25-40% savings were achieved in Areas A and B, respectively. Average savings for the 7-m deep dimming zone were 20-23% and 52-59% for Areas A and B, respectively, depending on the lighting schedule. The large savings and good reliability can be attributed to the automatic management of the interior shades. The DALI-based system exhibited faulty behavior that

Daylight Adaptive Shading Using Parametric Camshaft Mechanism for SOHO in Jakarta

Directory of Open Access Journals (Sweden)

Sjarifudin Firza Utama

2014-03-01

Full Text Available This research analyzes SOHO (Small Office Home Office which can adjust to the need of visual comfort for the users through natural daylighting and also can be adapted to standard requirements of 14 creative industry workspace in Jakartas. The method of the research is by simulating the SOHO unit with variation of shading opening angles in order to adapt to each unit. Analysis done to every shading opening angle to get the appropriate daylight intensity level which support the work activities in every unit for the whole day. In order for the shading to be able to adapt to the changing daylight condition, previously developed parametric camshaft mechanism was used. The study found that the visual comfort for SOHO with creative industries workers in Jakarta can be achieve by varying the shading opening angles between 15-75°.

Daylight calculations using constant luminance curves

Energy Technology Data Exchange (ETDEWEB)

Betman, E. [CRICYT, Mendoza (Argentina). Laboratorio de Ambiente Humano y Vivienda

2005-02-01

This paper presents a simple method to manually estimate daylight availability and to make daylight calculations using constant luminance curves calculated with local illuminance and irradiance data and the all-weather model for sky luminance distribution developed in the Atmospheric Science Research Center of the University of New York (ARSC) by Richard Perez et al. Work with constant luminance curves has the advantage that daylight calculations include the problem's directionality and preserve the information of the luminous climate of the place. This permits accurate knowledge of the resource and a strong basis to establish conclusions concerning topics related to the energy efficiency and comfort in buildings. The characteristics of the proposed method are compared with the method that uses the daylight factor. (author)

Adaptive integration of daylight and artificial lighting

DEFF Research Database (Denmark)

Petersen, Kjell Yngve

2016-01-01

Daylight is dynamic and dependent upon weather conditions; unfolding with both subtle and dramatic variations in qualities of light. Through a building’s apertures, daylight creates a connection between the space inside and the world outside. The aperture or window itself constitutes the frame...... with the world. In contrast to fluctuating daylight, a specific distinctive feature of artificial light has been – until very recently – its constancy in colour and intensity. However, by virtue of the technological convertibility of LEDs in concert with digital control systems, LEDs are capable of dynamically...... producing variations in colour and intensity in ways that correspond to our experiences of the daylight. Daylight and artificial lighting are thus positioned in a new relationship to one another. Metaphorically, one can think of the adaptive software as ‘digital weather’ – as a self-generating and shifting...

Impact of Furniture Layout on Indoor Daylighting Performance in Existing Residential Buildings in Malaysia

Directory of Open Access Journals (Sweden)

Seyed Mohammad Mousavi

2018-06-01

Full Text Available Currently, home-based computing workspaces have developed substantially all over the world, especially in Malaysia. This growing trend attracts computer workers to run a business from their residential units. Hence, visual comfort needs to be considered in addition to thermal comfort for home workers in their residential working rooms. While such rooms are always occupied with furniture, the layout of the furniture may influence the indoor daylighting distribution. Several various furniture layouts can be arranged in a residential working room. However, to have better generalisation, this study focused on the impacts of mostly-used-furniture-layouts (MUFLs on indoor daylighting performance in residential working rooms. The field measurement was conducted in a typically furnished room under a tropical sky to validate the results of the simulation software under different sky conditions. Then, daylight ratio (DR, as a quantitative daylighting variable, and the illuminance uniformity ratio (IUR, CIE glare index (CGI, and Guth visual comfort probability (GVCP, as qualitative daylighting variables, were analysed through simulation experiments. In conclusion, by changing the furniture layout, daylight uniformity recorded the highest fluctuations in the case room among all variables. While various furniture layouts, in a residential working room in the tropics, may even slightly reduce the extreme indoor daylight quantity, they can worsen the indoor daylight quality compared to an unfurnished space. The paper shows that furniture as an interior design parameter cannot help to improve tropical daylighting performance in a building.

Daylighting simulation : comparison of softwares for architect's utilization

Energy Technology Data Exchange (ETDEWEB)

Christakou, D.E.; Amorim, C.N.D. [Brazil Univ., Brasilia (Brazil). Faculty of Architecture and Urbanism

2005-07-01

This study analyzed and compared 4 daylighting software packages to determine the primary benefits and limits of each one, while considering the priorities for the use of the software by architects. The complex task of daylight simulation is an important step in designing buildings, particularly when the main objective is comfort and energy conservation. Simulation is not yet commonly practiced by professional architects because of the complexities of various software packages, the lack of user friendly interfaces and difficulty in interpreting results. The 4 software packages that were evaluated in this study were: (1) Desktop Radiance, (2) Rayfront, (3) Relux 2004 Vision, and (4) Lightscape. Criteria such as interfaces, flexibility, and help manuals were also analyzed in an effort to establish a frame of the main points to be considered when choosing daylighting software for architectural use, both in educational and office environments. Simulations of a test room were performed in which some parameters were modified to verify the performance of the following main criteria: flexibility in adapting to the architect's workflow; the use of state of the art algorithms; numerical precision; and, access possibility by Brazilian architects. The results demonstrate the potential of software's improvement, particular in terms of user interfaces and help manuals. The study showed that Relux 2004 Vision is the most adequate for architect's use. Rayfront and Desktop Radiance presented more difficulties in the design process, but Desktop Radiance had the advantage of being enclosed in AUTOCAD, a well known interface. Lightscape had a user friendly interface but was not as intuitive as Relux. It was concluded that the ideal daylighting simulation software does not yet exist. The ideal software should integrate diverse factors and combine edition and modeling tools beyond luminous evaluation and thermal consequences of daylight use. 5 refs., 3 tabs., 4 figs.

Performance of a daylight-redirecting glass-shading system

DEFF Research Database (Denmark)

Appelfeld, David; Svendsen, Svend

2013-01-01

to the original system. The visual comfort was evaluated by glare analysis and the redirected daylight did not cause an additional discomfort glare. The higher utilization of daylight can save 20% of the lighting energy. The thermal insulation of the fenestration was maintained, with slightly increased solar......This paper evaluates the daylighting performance of a prototype external dynamic shading and daylight-redirecting system, and the main focus is on the performance simulation. The demonstration project was carried out on a building with an open-plan office. Part of the original façade was replaced...... with the prototype façade. This layout allowed the use of the same orientation and surroundings for both façades. The working plane illuminance was measured over several months and the measurements were accompanied with annual daylight simulations. The prototype system improved the daylighting conditions compared...

Architecture, energy and daylight. Study of seven buildings; Arkitektur, energi og dagslys. Undersoegelse af syv bygninger

Energy Technology Data Exchange (ETDEWEB)

Christoffersen, J.; Petersen, E.; Svensson, O.

2001-07-01

The purpose of this research project was to enhance the designer's knowledge for designing buildings, rooms and window openings which utilise daylight in such a way that aesthetic and functional requirements can be met and energy consumption for electric lighting can be reduced at the same time. It was not the purpose of the project to develop guidelines but only to demonstrate how good daylight conditions and energy conservation can be achieved. The daylight conditions in the seven selected buildings were registered and assessed by the panel on two field trips in the spring of 1999. During these visits, the research team registered the location of rooms, their orientation, windows, artificial lighting etc. After the field trips, the buildings were photographed and the research group performed measurements and analyses of the lighting conditions in the rooms. However, the quality of daylight cannot be determined based only on measurements. The four professionals therefore supplemented the measurements with a subjective evaluation. The study of these seven buildings led to a number of results that must be assumed to be generally valid. A main result is that good daylight conditions in no way prevents or impedes the creation of good architecture. On the contrary, quality of daylight creates both functional as well as aesthetically satisfactory architecture. In all the investigated buildings, the ratio of glass areas to floor area is highter than 10%. In Denmark, this ratio would ensure reasonable daylight access and a view out. However, when size of glass area and daylight measurements are compared, the relationship between them is not straight-forward. The quantity and quality of daylight in buildings depend on other factors too, such as the depth of window openings, solar shading devices, opposite buildings, outdoor vegetation etc. The study points out that there are no standard solutions of how to design facades and window openings which satisfy all

Determining daylight and view preferences from the use of blinds in apartments

DEFF Research Database (Denmark)

Petersen, Mads Dines

2015-01-01

preferences have significant influence on the daylight level and view as well as possible impact on the building’s energy consumption. Therefore, it is important to conduct further studies in the area in order to be able to design solutions that supports the user preferences better and through that improves...... for the inhabitants’ health and well-being, as well as the energy consumption. Present research is an important contribution, because of the increased knowledge about daylights impact on health and well-being as well as daylights impact on the energy consumption in our buildings. However, it is often seen...... that curtains or blinds, often close off new apartment buildings with large glass areas in dense urban context. Such observations indicate that there can be a discrepancy between the intentions of the design team or architect and the perception of the user. The paper presents the results of observations...

OPTIMIZATION STUDY OF VISUAL COMFORT AND DAYLIGHT AVAILABILITY AT CADL ITB

Directory of Open Access Journals (Sweden)

SIREGAR Mhd. Akbar Anthony

2016-12-01

Full Text Available One way to reduce energy consumption in buildings is to use daylighting. However, daylight can cause visual discomfort in the form of glare. Center of Art, Design, and Language (CADL Institut Teknologi Bandung is a building that has windows on west and east facades, so the probability of glare occurrence is high. In this research, CADL was optimized so that the percentage of time that Daylight Glare Probability below 0.21 (%DGP<0.21 is more than 50% and spatial daylight autonomy with illuminance 150 lux and 50% (sDA150lux,50% is more than 30%. In the optimization, vertical blinds, horizontal blinds, and curtains were added. Vertical blinds and horizontal blinds were varied by changing the blade’s opening angle and area covering the windows, while curtains were varied only by changing the area covering the windows. The results show that %DGP<0.21 can be increased beyond 50%, but in some rooms, sDA150,50% also decrease below 30%. The most frequent optimum solutions are vertical blinds 75%-60o.

The Dynamics of Daylighting at a Residential College Building with the Internal Courtyard Arrangement

Directory of Open Access Journals (Sweden)

Adi Ainurzaman Jamaludin

2015-11-01

Full Text Available Dayasari residential college building was designed with the internal courtyard that allows for numerous implementations of bioclimatic design strategies, especially on daylighting. The field measurement was conducted at eight unoccupied student rooms, selected as samples to represent ten scenarios and orientations that concerned with the level of radiation and penetration of sunlight. This study reveals the contribution of the internal courtyard in the residential college which allows the daylight penetration at the corridor areas and interior of the rooms through the transom over the entrance door, up to ten hours daily. Different amounts of daylight were measured in specific room scenarios to suggest on the most comfortable indoor living space. The recorded mean value for indoor varied from 37 to 286 lux, while in the corridor area 192 to 3,848 lux. However, the use of the large overhangs over the windows, wall openings in the room and trees with large canopy in the landscape setting should critically justify when the adequacy of daylight was drastically reduced in certain rooms.

The impact of windows and daylight on acute-care nurses' physiological, psychological, and behavioral health.

Science.gov (United States)

Zadeh, Rana Sagha; Shepley, Mardelle McCuskey; Williams, Gary; Chung, Susan Sung Eun

2014-01-01

To investigate the physiological and psychological effects of windows and daylight on registered nurses. To date, evidence has indicated that appropriate environmental lighting with characteristics similar to natural light can improve mood, alertness, and performance. The restorative effects of windows also have been documented. Hospital workspaces generally lack windows and daylight, and the impact of the lack of windows and daylight on healthcare employees' well being has not been thoroughly investigated. Data were collected using multiple methods with a quasi-experimental approach (i.e., biological measurements, behavioral mapping, and analysis of archival data) in an acute-care nursing unit with two wards that have similar environmental and organizational conditions, and similar patient populations and acuity, but different availability of windows in the nursing stations. Findings indicated that blood pressure (p windows and daylight. A possible micro-restorative effect of windows and daylight may result in lowered blood pressure and increased oxygen saturation and a positive effect on circadian rhythms (as suggested by body temperature) and morning sleepiness. Critical care/intensive care, lighting, nursing, quality care, work environment.

Daylight and absenteeism--evidence from Norway.

Science.gov (United States)

Markussen, Simen; Røed, Knut

2015-01-01

Based on administrative register data from Norway, we examine the impact of hours of daylight on sick-leave absences among workers. Our preferred estimates imply that an additional hour of daylight increases the daily entry rate to absenteeism by 0.5 percent and the corresponding recovery rate by 0.8 percent, ceteris paribus. The overall relationship between absenteeism and daylight hours is negative. Absenteeism is also sensitive to weather conditions. Heavy snowfall raises the incidence of absence during the winter, while warm weather reduces the probability of returning to work during the summer. Copyright © 2014 Elsevier B.V. All rights reserved.

Singapore's Zero-Energy Building's daylight monitoring system

Energy Technology Data Exchange (ETDEWEB)

Grobe, Lars; Wittkopf, Stephen; Pandey, Anupama Rana; Xiaoming, Yang; Seng, Ang Kian; Scartezzini, Jean-Louis; Selkowitz, Stephen

2010-02-28

A setup to monitor the daylighting performance of different glazing types in Singapore is presented. The glazing is installed in the facade of four dedicated testing chambers in BCAA's Zero Energy Building in Singapore. These test rooms are equipped with sensors that both record illuminances on the work plane, and luminances as seen by occupants. The physical and logical design of the monitoring system is presented. Criteria to assess the daylighting performance are introduced, and initial results of the work in progress are presented.

Combining annual daylight simulation with photobiology data to assess the relative circadian efficacy of interior spaces

Energy Technology Data Exchange (ETDEWEB)

Pechacek, C.S.; Andersen, M. [Massachusetts Inst. of Technology, Cambridge, MA (United States). Dept. of Architecture, Building Technology; Lockley, S.W. [Harvard Medical School, Boston, MA (United States). Div. of Sleep Medicine, Brigham and Women' s Hospital

2008-07-01

This paper addressed the issue of hospital design and the role of daylight in patient health care. It presented a new approach for integrating empirical data and findings in photobiology into the performance assessment of a space, thus combining both visual and health-related criteria. Previous studies have reported significant health care outcomes in daylit environments, although the mechanism and photoreceptor systems controlling these effects remain unknown. This study focused on furthering the previous studies beyond windows to describing the characteristics of daylight that may promote human health by providing daylighting for the appropriate synchronization of circadian rhythms, and then make specific daylighting recommendations, grounded in biological findings. In particular, this study investigated the use of daylight autonomy (DA) to simulate the probabilistic and temporal potential of daylight for human health needs. Results of photobiology research were used to define threshold values for lighting, which were then used as goals for simulations. These goals included spectrum, intensity and timing of light at the human eye. The study investigated the variability of key architectural decisions in hospital room design to determine their influence on achieving the goals. The simulations showed how choices in building orientation, window size, user-window position and interior finishes affect the circadian efficacy of a space. Design decisions can improve or degrade the health potential for the space considered. While the findings in this research were specific to hospitals, the results can be applied to other building types such as office buildings and residences. 33 refs., 7 figs.

Delight2 Daylighting Analysis in Energy Plus: Integration and Preliminary User Results

Energy Technology Data Exchange (ETDEWEB)

Carroll, William L.; Hitchcock, Robert J.

2005-04-26

DElight is a simulation engine for daylight and electric lighting system analysis in buildings. DElight calculates interior illuminance levels from daylight, and the subsequent contribution required from electric lighting to meet a desired interior illuminance. DElight has been specifically designed to integrate with building thermal simulation tools. This paper updates the DElight capability set, the status of integration into the simulation tool EnergyPlus, and describes a sample analysis of a simple model from the user perspective.

Analysis of Daylight Control in a Chateau Interior

Directory of Open Access Journals (Sweden)

Jitka Mohelníková

2018-05-01

Full Text Available Assessment of daylighting in the residential hall of a historical chateau is presented. The evaluation is based on both the daylight measurement and simulations. Illuminance levels in the interior were controlled in accordance with requirements for light exposition of light sensitive materials. Valuable paintings and claddings as well as wallpapers and furniture upholstery in the hall are extremely light sensitive and they need to be protected from light damage. The daylight measurements and simulations give an overview of daylight conditions in the annual profile for clear sky conditions and for different levels of window shadings.

The daylight alternative for energy conservation saving in lighting systems; La luz natural alternativa para el ahorro de energia en sistemas de iluminacion

Energy Technology Data Exchange (ETDEWEB)

Escutia Perez, A.; Cruz Mendez, E. P. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico D. F. (Mexico); Buitron Sanchez, H. [Programa de Ahorro de Energia del Sector Electrico, Mexico D. F. (Mexico)

1995-12-31

The technological advances generate far reaching changes in all types of installation. The new spaces and the existing ones justify the introduction of new technologies taking into account important economic considerations, mostly when the advantage of daylight is taken into consideration in industrial and commercial lighting. In the daylight design it is necessary to know the solar transit, the atmospheric conditions, the architectural design of the building, the materials and the control elements, etc. to apply with precision the calculation method. The fundamental lighting technic have varied little. In the greatest part of commerces and industries the general lighting is used, that produces an illumination more or less uniform on the working areas, which guarantees a total freedom for the placement of machinery, working benches, racks, exhibitors, clothes racks, etc.. This type of lighting is obtained by means of the use of a more or less regular series of skylights. The adequate localized lighting is used in those zones where because of the presence of obstructions or unfavorable slant of the working plan are not sufficiently well lighted by the general lighting system. The daylight use in accordance with the every moment availability will permit in many working centers a sensible diminution of the artificial lighting time, provided that the characteristics of the control operation of the installation permit it, along with modern controlling devices and the great variety of efficient saving lamps. [Espanol] Los avances tecnologicos generan cambios trascendentes en todo tipo de instalacion. Los nuevos espacios y los ya existentes justifican la introduccion de nuevas tecnologias teniendo consideraciones economicas importantes, sobre todo cuando se aprovecha la luz natural en sistemas de alumbrado industrial y comercial. En el diseno de iluminacion natural, es necesario tener el conocimiento del transito solar, las condiciones atmosfericas, el diseno

The daylight alternative for energy conservation saving in lighting systems; La luz natural alternativa para el ahorro de energia en sistemas de iluminacion

Energy Technology Data Exchange (ETDEWEB)

Escutia Perez, A; Cruz Mendez, E P [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico D. F. (Mexico); Buitron Sanchez, H [Programa de Ahorro de Energia del Sector Electrico, Mexico D. F. (Mexico)

1996-12-31

The technological advances generate far reaching changes in all types of installation. The new spaces and the existing ones justify the introduction of new technologies taking into account important economic considerations, mostly when the advantage of daylight is taken into consideration in industrial and commercial lighting. In the daylight design it is necessary to know the solar transit, the atmospheric conditions, the architectural design of the building, the materials and the control elements, etc. to apply with precision the calculation method. The fundamental lighting technic have varied little. In the greatest part of commerces and industries the general lighting is used, that produces an illumination more or less uniform on the working areas, which guarantees a total freedom for the placement of machinery, working benches, racks, exhibitors, clothes racks, etc.. This type of lighting is obtained by means of the use of a more or less regular series of skylights. The adequate localized lighting is used in those zones where because of the presence of obstructions or unfavorable slant of the working plan are not sufficiently well lighted by the general lighting system. The daylight use in accordance with the every moment availability will permit in many working centers a sensible diminution of the artificial lighting time, provided that the characteristics of the control operation of the installation permit it, along with modern controlling devices and the great variety of efficient saving lamps. [Espanol] Los avances tecnologicos generan cambios trascendentes en todo tipo de instalacion. Los nuevos espacios y los ya existentes justifican la introduccion de nuevas tecnologias teniendo consideraciones economicas importantes, sobre todo cuando se aprovecha la luz natural en sistemas de alumbrado industrial y comercial. En el diseno de iluminacion natural, es necesario tener el conocimiento del transito solar, las condiciones atmosfericas, el diseno

The role of fenestration in promoting daylight performance. The mosques of Alexandria since the 19th century

Directory of Open Access Journals (Sweden)

Ingy I. El-Darwish

2016-12-01

Full Text Available Mosques have always been sacred places with distinctive sustainable environments. Fenestration in the prayers’ zone whether clerestories, screened windows, dome lighting and other light features have managed to produce significant spiritual human comfort areas. This paper focuses on fenestration of divine mosques and relates them to promoting daylight performance. The research process emphasizes the importance of daylight performance by promoting simulation tools on historical mosques of Alexandria since the 19th century that has witnessed change over time. The paper is a step toward sustainable lighting schemes in prayers’ zones that help to achieve human comfort as well as minimize use of energy. This study aimed at investigating the daylight performance by the use of climate based daylighting metrics which is “Daylight Autonomy” (DA. Daylight Autonomy is evaluated in the year round for the day lighted prayer periods to evaluate the behavior of fenestration of the different selected sample of mosques since the 19th century in Alexandria on a simulation tool in order to check whether it complies with the required illuminate and glare levels. The research findings are an attempt to lead to performative design guidelines introducing a contemporary interpretation for use in enhancing new designs of these holistic buildings.

Daylighting in linear atrium buildings at high latitudes

Energy Technology Data Exchange (ETDEWEB)

Matusiak, Barbara

1998-12-31

This thesis proposes new criteria for visual comfort based on knowledge of visual perception and a method for estimating the modelling ability of light by using inter-reflection calculations. Simplified calculations are presented for the daylight factor in linear building structures, using the projected solid angle principle, for uniform sky and for CIE overcast sky conditions. The calculations are compared with experimental results. Simple diagrams are created based on calculations of the mean daylight factor in rooms adjacent to a narrow street. These diagrams and presented formulas and tables can be used as a simple design tool. Daylighting strategies for linear atrium buildings at high latitudes are developed and examined. These strategies are divided into three groups: (1) the atrium space and facades as light conductor/reflector, (2) the glass roof as a light conductor, and (3) light reflectors on the neighbouring roof. The atrium space and facade strategies are subdivided into passive and active. The strategies connected to the glazed roof includes different configurations of glazing: horizontal, single pitched, double pitched, and the use of laser cut panels and prismatic panels in the glazed roof. The shapes of reflectors on the neighbouring roof are a flat reflector, a parabolic reflector and a parabolic concentrator. Strategies from all three groups are examined on a physical model of scale 1:20 in the artificial sky of mirror box type. Simulations with artificial sun have also been done. The results from model studies are compared with computer simulations. All the active daylighting systems designed for use in the atrium space or on the atrium facades have a huge potential for use in atrium buildings. From the strategies connected with the glazed roof the negatively sloped glass is found to be the best alternative for glazed roofs at high latitudes. Among the roof reflectors, the flat one performs best. 82 refs., 122 figs., 27 tabs.

Comparative Study of Daylighting Calculation Methods

Directory of Open Access Journals (Sweden)

Mandala Ariani

2018-01-01

Full Text Available The aim of this study is to assess five daylighting calculation method commonly used in architectural study. The methods used include hand calculation methods (SNI/DPMB method and BRE Daylighting Protractors, scale models studied in an artificial sky simulator and computer programs using Dialux and Velux lighting software. The test room is conditioned by the uniform sky conditions, simple room geometry with variations of the room reflectance (black, grey, and white color. The analyses compared the result (including daylight factor, illumination, and coefficient of uniformity value and examines the similarity and contrast the result different. The color variations trial is used to analyses the internally reflection factor contribution to the result.

Does Daylight Savings Time encourage physical activity?

Science.gov (United States)

Zick, Cathleen D

2014-07-01

Extending Daylight Savings Time (DST) has been identified as a policy intervention that may encourage physical activity. However, there has been little research on the question of if DST encourages adults to be more physically active. Data from residents of Arizona, Colorado, New Mexico, and Utah ages 18-64 who participated in the 2003-2009 American Time Use Survey are used to assess whether DST is associated with increased time spent in moderate-to-vigorous physical activity (MVPA). The analysis capitalizes on the natural experiment created because Arizona does not observe DST. Both bivariate and multivariate analyses indicate that shifting 1 hour of daylight from morning to evening does not impact MVPA of Americans living in the southwest. While DST may affect the choices people make about the timing and location of their sports/recreational activities, the potential for DST to serve as a broad-based intervention that encourages greater sports/recreation participation is not supported by this analysis. Whether this null effect would persist in other climate situations is an open question.

Glazing façade modules : daylighting performance simulation for Bragança, Coimbra, Évora and Faro

OpenAIRE

Sacht, Helenice Maria; Bragança, L.; Almeida, Manuela Guedes de; Caram, Rosana

2012-01-01

The daylighting performance improvement is one better strategy to reduce the artificial lighting consumption in buildings and obviously requires solar radiation from the exterior. Daylighting comes not only from direct sunlight but also from illumination provided by the sky on overcast days. Particular attention must be given to daylighting while designing a building when the aim is to maximize visual comfort or to reduce energy consumption. Visual comfort of glazing façades is a fundamental ...

Lighting control and dimensioning in integrated daylight systems

Energy Technology Data Exchange (ETDEWEB)

Halonen, L.; Eloholma, M.; Lehtovaara, J.

1996-12-31

The objective of this research was to find out the subjective and individual requirements for lighting control in connection with daylight utilization in indoor lighting. There is a great potential to use daylight in indoor lighting. This sets demands for the integrated daylight control systems, so that the indoor lighting can be optimized and demands of the users can be fulfilled. Control strategies should also take into account individual light needs, luminance balance and visual comfort. New lighting control systems and strategies such as vertical/horizontal illuminance ratio were studied. The incoming daylight may radically change the luminance distribution of the visual field and the effects of daylight on luminances of vertical surfaces may become especially noticeable. When daylight is utilized in indoor lighting, special care has to be taken to maintain the quality of the lighting of the visual environment. The windows become a potential source of discomfort glare in offices in uncontrolled daylight conditions. With the present methods it is not possible to evaluate discomfort glare caused by high surface luminances or windows. The results of this research do not support the opinion that low vision people in offices need more light than the normally sighted or that the illumination levels should be raised for low vision people. The rise of lighting levels from the present practice (task illuminance level 500 lux) in office work does not improve the visual performance of low vision people. In planning the visual environment for the low vision people care has to be taken on the direction of light. (7 refs.)

A simple tool to evaluate the effect of the urban canyon on daylight level and energy demand in the early stages of building design

DEFF Research Database (Denmark)

Petersen, Steffen; Momme, Amalie Jin; Hviid, Christian Anker

2014-01-01

Daylight is a restricted resource in urban contexts. Rooms situated in an urban context often have a significant proportion of the sky and the sun blocked out by the urban building mass. The reduced direct daylight potential makes daylight reflected from outdoor surfaces an important daylight sou...... the impact of urban canyon parameters on indoor environment and energy performance....

Assessment of daylight quality in simple rooms

DEFF Research Database (Denmark)

Johnsen, Kjeld; Dubois, Marie-Claude; Sørensen, Karl Grau

The present report documents the results of a study on daylight conditions in simple rooms of residential buildings. The overall objective of the study was to develop a basis for a method for the assessment of daylight quality in a room with simple geometry and window configurations. As a tool...... in daylighting conditions for a number of lighting parameters. The results gave clear indications of, for instance, which room would be the brightest, under which conditions might glare be a problem and which type of window would yield the greatest luminous variation (or visual interest), etc....

Computer Modeling of Daylight-Integrated Photocontrol of Electric Lighting Systems

Directory of Open Access Journals (Sweden)

Richard Mistrick

2015-05-01

Full Text Available This article presents a variety of different approaches to both model and assess the performance of daylight-integrated electric lighting control systems. In these systems, the output of a controlled lighting zone is based on a light sensor reading and a calibrated control algorithm. Computer simulations can consider the simulated illuminance data generated from both the electric lighting system and a daylight delivery system whose performance is addressed using typical meteorological year (TMY weather data. Photosensor signals and the operation of a control system’s dimming algorithms are also included. Methods and metrics for evaluating simulated performance for the purpose of making informed design decisions that lead to the best possible installed system performance are presented.

Light + architecture. Daylight - artificial light - energy; Licht + Architektur. Tageslicht - Kunstlicht - Energie

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

The symposium intends to provide scientific and technical fundamentals for room lighting with daylight. Daylight deflection systems and artificial light control systems were analyzed for this purpose, and a catalogue of criteria was established. Planners were given tools for projecting daylight control systems. Builder-owners received the fundamentals for economic assessment of combined daylight and artificial light illumination systems, while industrial producers obtained information for further development to maturity and for marketing of daylight-dependent artificial light control systems. (GL)

Hybrid daylight/light-emitting diode illumination system for indoor lighting.

Science.gov (United States)

Ge, Aiming; Qiu, Peng; Cai, Jinlin; Wang, Wei; Wang, Junwei

2014-03-20

A hybrid illumination method using both daylight and light-emitting diodes (LEDs) for indoor lighting is presented in this study. The daylight can be introduced into the indoor space by a panel-integration system. The daylight part and LEDs are combined within a specific luminaire that can provide uniform illumination. The LEDs can be turned on and dimmed through closed-loop control when the daylight illuminance is inadequate. We simulated the illumination and calculated the indoor lighting efficiency of our hybrid daylight and LED lighting system, and compared this with that of LED and fluorescent lighting systems. Simulation results show that the efficiency of the hybrid daylight/LED illumination method is better than that of LED and traditional lighting systems, under the same lighting conditions and lighting time; the method has hybrid lighting average energy savings of T5 66.28%, and that of the LEDs is 41.62%.

Autonomous physics-based color learning under daylight

Science.gov (United States)

Berube Lauziere, Yves; Gingras, Denis J.; Ferrie, Frank P.

1999-09-01

An autonomous approach for learning the colors of specific objects assumed to have known body spectral reflectances is developed for daylight illumination conditions. The main issue is to be able to find these objects autonomously in a set of training images captured under a wide variety of daylight illumination conditions, and to extract their colors to determine color space regions that are representative of the objects' colors and their variations. The work begins by modeling color formation under daylight using the color formation equations and the semi-empirical model of Judd, MacAdam and Wyszecki (CIE daylight model) for representing the typical spectral distributions of daylight. This results in color space regions that serve as prior information in the initial phase of learning which consists in detecting small reliable clusters of pixels having the appropriate colors. These clusters are then expanded by a region growing technique using broader color space regions than those predicted by the model. This is to detect objects in a way that is able to account for color variations which the model cannot due to its limitations. Validation on the detected objects is performed to filter out those that are not of interest and to eliminate unreliable pixel color values extracted from the remaining ones. Detection results using the color space regions determined from color values obtained by this procedure are discussed.

Influence of daylight on the fate of silver and zinc oxide nanoparticles in natural aquatic environments

International Nuclear Information System (INIS)

Odzak, Niksa; Kistler, David; Sigg, Laura

2017-01-01

Nanoparticles, such as silver (Ag-NP) and zinc oxide (ZnO-NP), are increasingly used in many consumer products. These nanoparticles (NPs) will likely be exposed to the aquatic environment (rain, river, lake water) and to light (visible and UV) in the products where they are applied, or after those products are discharged. Dissolution of Ag-NP and ZnO-NP is an important process because the dissolved Ag + and Zn 2+ are readily available and toxic for aquatic organisms. The objective of this study was to investigate the role of daylight (UV and visible) for the fate of engineered Ag-NP and ZnO-NPs in different types of natural waters. Ag-NP and ZnO-NP were exposed to rainwater, river Rhine, and lake waters (Greifen, Lucerne, Cristallina, Gruère) under different light conditions (no light, UV 300–400 nm and visible light 400–700 nm) for up to 8 days. Stronger agglomeration of Ag-NP was observed in the waters with higher ionic strength in comparison to those with lower ionic strength. Visible light tended to increase the dissolution of Ag-NP under most natural water conditions in comparison to dark conditions, whereas UV-light led to decreased dissolved Ag + after longer exposure time. These effects illustrate the dynamic interactions of Ag-NP with light, which may lead both to increased oxidation and to increased reduction of Ag + by organic compounds under UV-light. In the case of ZnO-NP, agglomeration occurred at higher ionic strength, but the effects of pH were predominant for dissolution, which occurred up to concentrations close to the solubility limit of ZnO(s) at pH around 8.2 and to nearly complete dissolution of ZnO-NP at lower pH (pH 4.8–6.5), with both visible and UV-light facilitating dissolution. This study thus shows that light conditions play an important role in the dissolution processes of nanoparticles. - Highlights: • Effects of visible and UV-light on dissolution of silver and zinc oxide nanoparticles were examined. • Natural waters

Daylighting Strategies Promote Healthy High Performance Buildings

Science.gov (United States)

Gille, Steve

2010-01-01

There are many reasons to incorporate daylighting into the building or renovation of K-16 learning facilities. Benefits include increased productivity for students and staff, improved health, a better connection to the outdoors, energy savings and better quality of light. Add the role daylighting can play in LEED certification and it's clear that…

Fuzzy-Neural Automatic Daylight Control System

Directory of Open Access Journals (Sweden)

Grif H. Şt.

2011-12-01

Full Text Available The paper presents the design and the tuning of a CMAC controller (Cerebellar Model Articulation Controller implemented in an automatic daylight control application. After the tuning process of the controller, the authors studied the behavior of the automatic lighting control system (ALCS in the presence of luminance disturbances. The luminance disturbances were produced by the authors in night conditions and day conditions as well. During the night conditions, the luminance disturbances were produced by turning on and off a halogen desk lamp. During the day conditions the luminance disturbances were produced in two ways: by daylight contributions changes achieved by covering and uncovering a part of the office window and by turning on and off a halogen desk lamp. During the day conditions the luminance disturbances, produced by turning on and off the halogen lamp, have a smaller amplitude than those produced during the night conditions. The luminance disturbance during the night conditions was a helpful tool to select the proper values of the learning rate for CMAC controller. The luminance disturbances during the day conditions were a helpful tool to demonstrate the right setting of the CMAC controller.

Flat Optical Fiber Daylighting System with Lateral Displacement Sun-Tracking Mechanism for Indoor Lighting

Directory of Open Access Journals (Sweden)

Ngoc Hai Vu

2017-10-01

Full Text Available An essential impact which can improve the indoor environment and save on power consumption for artificial lighting is utilization of daylight. Optical fiber daylighting technology offers a way to use direct daylight for remote spaces in a building. However, the existing paradigm based on the precise orientation of sunlight concentrator toward the Sun is very costly and difficult to install on the roof of buildings. Here, we explore an alternative approach using mirror-coated lens array and planar waveguide to develop a flat optical fiber daylighting system (optical fiber daylighting panel with lateral displacement Sun-tracking mechanism. Sunlight collected and reflected by each mirror-coated lens in a rectangular lens array is coupled into a planar waveguide using cone prisms placed at each lens focus. This geometry yields a thin, flat profile for Sunlight concentrator. Our proposed concentrating panel can be achieved with 35 mm thickness while the concentrator’s width and length are 500 mm × 500 mm. The commercial optical simulation tool (LightToolsTM was used to develop the simulation models and analyze the system performance. Simulation results based on the designed system demonstrated an optical efficiency of 51.4% at a concentration ratio of 125. The system can support utilizing a lateral displacement Sun-tracking system, which allows for replacing bulky and robust conventional rotational Sun-tracking systems. This study shows a feasibility of a compact and inexpensive optical fiber daylighting system to be installed on the roof of buildings.

DAYLIGHTING PERFORMANCE OF HORIZONTAL LIGHT PIPE BRANCHING ON OPEN PLAN OFFICE SPACE

Directory of Open Access Journals (Sweden)

Feny ELSIANA

2015-12-01

Full Text Available For daylighting purpose, office buildings should have a shallow plan and increase the ratio of surface to building’s volume. However, intensive use of air-conditioning drives office building’s plan to be deep with a minimum surface to volume ratio. This leads to the presence of areas that have insufficient daylight level at the work plane. Considering limitations of some daylighting methods in distributing daylight to these areas, Horizontal Light Pipe (HLP was selected. The aim of this research was to evaluate and explain the effect of HLP branching on daylight quantity and distribution inside open plan office space. Experimental with simulation as a tool was used as the research method. HLP branching’s uniformity ratio, illuminance and Daylight Factor were compared with unbranching HLP, simultaneously with daylighting standards. Results showed that office space with HLP-L branching had higher daylight level than HLP-T branching, 296 lux and 295 lux, HLP-L and HLP-T, respectively. However, HLP-T branching distributed daylight more evenly than HLP-L branching, with uniformity ratio as 1.49:1 and 1.50:1, HLP-T and HLP-L, respectively. Both of them met the illuminance target value and uniformity at work plane. Light’s deflection and improvement amount of opening distribution decreased average illuminance and Daylight Factor up to 3.59%. Those also decreased uniformity of daylight inside the space.

Energy-efficient window systems. Effects on energy use and daylight in buildings

Energy Technology Data Exchange (ETDEWEB)

Buelow-Huebe, H.

2001-11-01

This thesis deals with energy-efficient windows in Swedish buildings. Parametric studies were performed in the dynamic energy simulation tool Derob-LTH in order to study the effects of window choices on energy use and indoor climate for both residential and office buildings. A steady-state program was used to evaluate two years of measurements of energy use and indoor temperatures of an energy-efficient row-house. Two behavioural studies regarding (1) daylight transmittance, view and room perception using super-insulated windows and (2) the satisfaction with the daylight environment and the use of shading devices in response to daylight/sunlight were conducted in full-scale laboratory environments exposed to the natural climate. Results show that as the energy-efficiency of buildings increase, window U-values must decrease in order not to increase the annual heating demand, since the heating season is shortened, and useful solar gains become smaller. For single-family houses with a window-to-floor area ratio of 15 % and insulated according the current Swedish building code, the U-values should thus on average be lower than 1.0 W/m{sup 2}K. For houses insulated according to 1960s standard, the U-value may on average be 1.6 W/m{sup 2}K. For colder climates (northern Sweden), the U-values should be somewhat lower, while slightly higher U-values can be tolerated in milder climates of south Sweden. Thermal comfort during winter is improved for energy-efficient windows. However, overheating problems exist for both super-insulated houses and highly glazed office buildings showing a need for very low U-values in combination with low g-values. Daylight experiments indicate that the use of two low-emittance coatings tints the transmitted daylight enough to be appreciated, and colours may be perceived as more drab and rooms more enclosed. A compromise between energy-efficiency and daylighting may be needed, and it is suggested that only one coating be used except when very

Performance of Anidolic Daylighting Systems in tropical climates - Parametric studies for identification of main influencing factors

Energy Technology Data Exchange (ETDEWEB)

Linhart, Friedrich; Scartezzini, Jean-Louis [Solar Energy and Building Physics Laboratory (LESO-PB), Swiss Federal Institute of Technology in Lausanne (EPFL), 1015 Lausanne (Switzerland); Wittkopf, Stephen K. [School of Design and Environment, Department of Architecture, National University of Singapore, 4 Architecture Drive, Singapore 117566 (Singapore)

2010-07-15

Making daylight more available in buildings is highly desirable, not only for reasons of energy-efficiency, but also for improvement of occupants' health and well-being. Core-daylighting, that is daylight provision in areas situated at considerable distances from facades and windows, is currently one of the main challenges in sustainable building design. Anidolic Daylighting Systems (ADSs) are one very promising technology in the field of core-daylighting, but commercial solutions that are not only well-performing but also financially competitive are not yet widely available. This article presents results of parametric studies on Anidolic Integrated Ceilings (AICs), a special type of ADS, for identification of main influencing factors. The article describes a reliable method for simulating ADS and AIC performance under given sky conditions. Various simulation results for the example location Singapore are discussed in detail, it is concluded that the main influencing factors are coating material, system dimensions and external obstruction, and those influencing factors' potential impacts are quantified. It is shown that AIC overall efficiencies can reach up to almost 50% in Singapore. The essentially new results presented in this article can be of great help to architects, engineers and scientists in the future, when it comes to precisely dimensioning ADS for various buildings and daylight conditions. (author)

PULSE: Integrated Parametric Modeling for a Shading System : From Daylight Optimization to Additive Manufacturing

NARCIS (Netherlands)

Teeling, M.V.M.T.; Turrin, M.; de Ruiter, P.; Turrin, Michela; Peters, Brady; O'Brien, William; Stouffs, Rudi; Dogan, Timur

2017-01-01

This paper presents a parametric approach to an integrated and performance-oriented design, from the conceptual design phase towards materialization. The novelty occurs in the use of parametric models as a way of integrating multidisciplinary design constraints, from daylight optimization to the

Light and energy - daylight measurements

Energy Technology Data Exchange (ETDEWEB)

Christoffersen, Jens; Logadottir, A.; Traberg-Borup, S.; Barrie-Nielsen, K.

2009-07-01

All measurements where conducted in the spring of 2007, except the Interpane panel. The solar cell panels have been evaluated by three performance indicators to assess the daylight quantity within the room and the systems ability to maintain view to the outside. In the study, we used two performance indicators to assess the daylight quantity within the room: 1. the daylight factor (overcast sky) 2. the relative work plane illuminance (clear sky condition) Overcast sky: In general, all panels provided less daylight than the recommended requirement in the Danish Building Regulation of 2% on the work plane. This will most likely result in additional need for electric lighting. However, larger window areas and more parts of the facade with clear unobstructed glass may be one solution. Clear sky: In general, all panels provided less interior light levels than the two reference systems in the back of the room. Almost all systems aloud more or less direct sunlight in the window perimeter through the clear openings and additional needs for some kind of shading device is to be expected. Some systems blocked a large portion of the light in the majority of the room, and additional electric light in this part of the room may be needed. Only one performance indicator where used to describe the quality of the panels. View: In general, all panels, except two, obstruct the view significantly and cause figure/background confusion for a view position close to the window and the discrepancies of colour judgements. Only two systems provided a fairly clear view to the outside without to much distortion of the view. (au)

Integrated Energy Design in Master Planning

DEFF Research Database (Denmark)

Strømann-Andersen, Jakob Bjørn

This PhD thesis considers urban structure and buildings in an energy correlation and use the knowledge to design energy- and comfort-optimized cities and buildings. The parameters are: the structure of nature, the city and the landscape, both in terms of geometry and interrelationships and in terms...... in character as daylight is taken into account. Furthermore the results suggest that there are limits to urban densification (200-300%) as an energy optimization strategy. The solar energy and daylight potential should be considered, and indeed protected, as a common resource in urban design. The most...

The costs and benefits of using daylight guidance to light office buildings

Energy Technology Data Exchange (ETDEWEB)

Mayhoub, M.S.; Carter, D.J. [School of Architecture, University of Liverpool (United Kingdom)

2011-03-15

Daylight guidance systems are linear devices that channel daylight into the core of a building. This paper analyses costs and benefits of using the two main classes of daylight guidance to light offices as an alternative to conventional electric lighting. The work demonstrates that daylight guidance is generally not economical using conventionally accepted measures of both cost and benefit. It is shown that if intangible benefits associated with the delivery of daylight to offices are included in an analysis, a more favourable balance of cost and benefit is obtained. The implications of this for practical use of the systems are discussed. (author)

Economic feasibility of maximising daylighting of a standard office building with efficient electric lighting

DEFF Research Database (Denmark)

Fontoynont, Marc; Ramananarivo, Karine; Soreze, Thierry Silvio Claude

2016-01-01

This paper investigates the cost of developing various daylighting strategies for a standard office building in relation to their ability to reduce electric lighting consumption. The reference building design for this study corresponds to a typical configuration that minimises the construction...... costs and is typical of the French market. We have compared scenarios that entail moving service spaces to the periphery, increasing ceiling height and adding light wells of various shapes. These special features increased the proportion of the indoor area with sufficient daylight by up to 40...

Colour mixing based on daylight

International Nuclear Information System (INIS)

Meyn, Jan-Peter

2008-01-01

Colour science is based on the sensation of monochromatic light. In contrast to that, surface colours are caused by reflection of wide sections of the daylight spectrum. Non-spectral colours like magenta and purple appear homologous to colours with spectral hue, if the approach of mixing monochromatic light is abandoned. It is shown that a large region of the colour space can be covered by mixing three primary colours derived from lossless spectral decomposition of daylight. These primaries are specified by hue, saturation and luminosity. Duality of additive and subtractive mixing is formulated quantitatively. Experimental demonstrations of calculated results are suggested. This paper is intended for undergraduate optics courses, and advanced interdisciplinary seminars on arts and physics

Daylight Saving Time Transitions and Road Traffic Accidents

Directory of Open Access Journals (Sweden)

Tuuli Lahti

2010-01-01

Full Text Available Circadian rhythm disruptions may have harmful impacts on health. Circadian rhythm disruptions caused by jet lag compromise the quality and amount of sleep and may lead to a variety of symptoms such as fatigue, headache, and loss of attention and alertness. Even a minor change in time schedule may cause considerable stress for the body. Transitions into and out of daylight saving time alter the social and environmental timing twice a year. According to earlier studies, this change in time-schedule leads to sleep disruption and fragmentation of the circadian rhythm. Since sleep deprivation decreases motivation, attention, and alertness, transitions into and out of daylight saving time may increase the amount of accidents during the following days after the transition. We studied the amount of road traffic accidents one week before and one week after transitions into and out of daylight saving time during years from 1981 to 2006. Our results demonstrated that transitions into and out of daylight saving time did not increase the number of traffic road accidents.

Workplane Illuminance Estimation for Robust Daylight Harvesting Lighting Control

NARCIS (Netherlands)

Zhang, S.; Birru, D.

2012-01-01

Daylight harvesting lighting controls can provide significant energysavings in daylit spaces. However, their performance is affected bythe changing lighting distribution in the space due to window treatments and the sun. Such impacts reduce the field performance of daylight harvesting dimming

Light and architecture. Daylight - artificial light - energy; Licht und Architektur. Tageslicht - Kunstlicht - Energie

Energy Technology Data Exchange (ETDEWEB)

Wambsganss, M. (ed.) [ip5 ingenieurpartnerschaft, Karlsruhe (Germany)]|[Fachhochschule Rosenheim (Germany)

2007-07-01

The symposium intends to provide scientific and technical fundamentals for room lighting with daylight. Daylight deflection systems and artificial light control systems were analyzed for this purpose, and a catalogue of criteria was established. Planners were given tools for projecting daylight control systems. Builder-owners received the fundamentals for economic assessment of combined daylight and artificial light illumination systems, while industrial producers obtained information for further development to maturity and for marketing of daylight-dependent artificial light control systems. (GL)

Daylight-mediated photodynamic therapy of basal cell carcinomas - an explorative study

DEFF Research Database (Denmark)

Wiegell, S R; Skødt, V; Wulf, H C

2014-01-01

BACKGROUND: Studies have shown that daylight-photodynamic therapy (PDT) is an effective treatment of actinic keratoses, nearly pain free and more convenient for both the clinics and patients. Treatment of basal cell carcinomas (BCCs) is another main indication for PDT. OBJECTIVES: The aim...... of this open, uncontrolled, prospective explorative study was to evaluate the efficacy of daylight-PDT for BCCs. METHODS: Twenty-one patients with a total of 32 BCCs located in the face, scalp, chest, back and lower leg received one cycle of daylight-methyl aminolevulinate (MAL)-PDT, consisting of two...... treatments 1 week apart. After sunscreen application and lesion preparation, MAL was applied and patients exposed themselves to daylight for 2½ h. Daylight exposure was monitored with a wrist-borne dosimeter. RESULTS: At 3-month follow-up, complete response was seen in 30 lesions (94%) and in 19 patients (90...

Impact of three window configurations on daylight conditions

DEFF Research Database (Denmark)

Dubois, Marie-Claude; Sørensen, Karl Grau; Traberg-Borup, Steen

The report describes the results of a pilot study on daylight conditions in simple rooms of residential buildings. As a tool for the analyses the Radiance Lighting Simulating System was used to simulate one room with three different window configurations, a vertical window, a dormer window......, and a roof window. The simulations were performed for overcast sky conditions and under one sunny sky, for two different times of the day. The study shows that the window configuration affects the daylight conditions (distribution and intensity) significantly. The roof window results in a higher (average......) daylight factor on a horizontal plane, i.e. more than twice as high compared with the vertical window, and more than triple as high compared with the dormer window....

Daylight savings time transitions and the incidence rate of unipolar depressive episodes

DEFF Research Database (Denmark)

Hansen, Bertel T; Sønderskov, Kim M; Hageman, Ida

2017-01-01

Background: Daylight savings time transitions affect approximately 1.6 billion people worldwide. Prior studies have documented associations between daylight savings time transitions and adverse health outcomes, but it remains unknown whether they also cause an increase in the incidence rate...... of depressive episodes. This seems likely because daylight savings time transitions affect circadian rhythms, which are implicated in the etiology of depressive disorder. Therefore, we investigated the effects of daylight savings time transitions on the incidence rate of unipolar depressive episodes. Methods...

Effects of daylight savings time changes on stock market volatility.

Science.gov (United States)

Berument, M Hakan; Dogan, Nukhet; Onar, Bahar

2010-04-01

The presence of daylight savings time effects on stock returns and on stock volatility was investigated using an EGARCH specification to model the conditional variance. The evidence gathered from the major United States stock markets for the period between 1967 and 2007 did not support the existence of the daylight savings time effect on stock returns or on volatility. Returns on the first business day following daylight savings time changes were not lower nor was the volatility higher, as would be expected if there were an effect.

Window design : visual and thermal consequences : analysis of the thermal and daylighting performance of windows

NARCIS (Netherlands)

Bergem-Jansen, P.M. van; Soeleman, R.S.

1979-01-01

Selected results of an analysis for the thermal and lighting requirements associated with windows in utility buildings are presented. This analysis concerns the effects of r¡indow size and shape, orientation and of different ways of supplementing the daylight by artifieial light for a typical office

Glazing for intelligent daylight utilisation; Verglasungen fuer die intelligente Tageslichtnutzung

Energy Technology Data Exchange (ETDEWEB)

Rubbert, F. [VEGLA Vereinigte Glaswerke GmbH, Aachen (Germany)

1999-10-01

Daylight, a part of the solar energy incident on the Earth`s surface, is available to us for free and usually in sufficient quantity. Nevertheless, in office and administration buildings artificial lighting is used for an average 60% of total occupancy time. This figure refers not only those times of the year and day when daylight intensity is naturally weak but also includes periods when sunlight is available in excess. To minimise buildings` absorption of solar energy (and so reduce the cooling load) and shield workplaces against direct sunlight, frequent use is made of mechanical shading systems which necessitate the use of artificial lighting, this in turn adding to the cooling load. Several daylight systems have been developed and are now increasingly being used to resolve this paradoxical situation. [Deutsch] Tageslicht, als Bestandteil der Sonnenenergie, steht uns taeglich kostenlos und meistens in ausreichender Menge zur Verfuegung. Dennoch wird in Buero- und Verwaltungsgebaeuden die kuenstliche Beleuchtung im Durchschnitt waehrend etwa 60% der Nutzungszeit eingeschaltet. Dies jedoch nicht nur waehrend der tages- und jahreszeitlich bedingten Phasen mit einer geringen natuerlichen aeusseren Beleuchtungsstaerke, sondern gerade auch zu den Zeiten in denen Sonnenlicht im Uebermass zur Verfuegung steht. Denn zur Minimierung der in die Gebaeude eingebrachten solaren Energie (Reduzierung der Kuehllasten) und zur Erzielung eines Blendschutzes an den betroffenen Arbeitsplaetzen werden sehr haeufig mechanische Verschattungssysteme benutzt, die ein Zuschalten der kuenstlichen Beleuchtung erforderlich machen und somit wieder zu einer Erhoehung der Kuehllasten fuehren. Um dieser Parodoxie aufzuloesen, wurden einige Tageslichtsysteme entwickelt, die im zunehmenden Masse auch praktisch angewandt werden. (orig.)

How Can a Lighting Designer Use Light in Buildings For Well-Being? - 'Presented as invited speaker'

DEFF Research Database (Denmark)

Christoffersen, Jens

design. Summary: Adequate lighting, both natural and artificial, is important as part of a person's well-being. A description of a person's well-being may be context-specific depending on the building design and include a number of parameters such as daylight and sunlight penetration, window views...... and content of view, enclosed or open space, crowding, visual and acoustical privacy, personal control of ambient conditions etc. Successful daylighting requires trade-offs and optimisation between competing design aspects by skilful integration of the facade layout with the space configuration and the choice...... of lighting system used.  Surveys consistently show that people prefer daylight over electric light, a desire for windows and view is well-established, and daylight as primary source is believed to be more healthful. Also, work spaces often consist of changing visual tasks, and thereby different lighting...

Daylight Management in Mediterranean Cities: When Shortage Is Not the Issue

OpenAIRE

Judit Lopez-Besora; Glòria Serra-Coch; Helena Coch; Antonio Isalgue

2016-01-01

Natural resources such as daylight and sunlight are highly appreciated in countries with prevailing overcast skies. Taking advantage of this scarce resource contributes to saving energy on artificial lighting. In contrast to northern, southern European cities are distinguished by a large number of days with direct sunlight caused by a propitious climate condition. While it is a positive issue in terms of energy availability, the abundance of it can be counterproductive if management measures ...

Essence of Daylight in the Cistercian Monastic Church of S. Bento de Cástris, Évora, Portugal

Science.gov (United States)

Martins, Ana M. T.; Carlos, Jorge S.

2017-10-01

Natural light in the Cistercian churches is closely linked not only with the liturgical requirements at the “officium” but also with the canonical hours based on the "ora et labora" dictated by the Rule of St. Benedict. The Cistercian architecture, in its beginnings (12th century forward) is characterized by austerity, simplicity and the play of light and shadow that gives value to the monastic architectural space itself, making it perfect for a contemplative experience. In the Cistercian Monastery the church is the central piece of the monastic building. Nave, transept and apse are the main architectural components to which is added the choir. This paper contextualizes the importance and close connections of natural light, within the Cistercian Monasteries architecture. Thus the essence of daylight is analysed within the Church of the Monastery of S. Bento de Cástris, in Évora, Portugal. This former Monastery (13th - 19th centuries) includes the church, at the south-eastern corner which has not only a high choir, but also a low lateral choir (within the presbytery). Its unchanged exterior walls are made of solid masonry. Although the function of the walls is primarily structural, the windows allow the daylight to penetrate the space of the church. The church has two external façades facing northeast and southeast. The combined orientation effect of the church’s main axis and the sun trajectory determines how the sunlight reaches the interior of this architectural structure. This study presents the qualitative and quantitative analysis of the luminous environment in the church of S. Bento de Cástris, being the first based on the authors’ perception of the effect of the daylight within the different areas of the enclosed space. The appreciation of the spatial experiences was supported by quantitative daylight simulations that were conducted in selected areas within the space. With this paper is intended to contribute to the debate about the specificity

Literature Review of the Effects of Natural Light on Building Occupants

Energy Technology Data Exchange (ETDEWEB)

Edwards, L.; Torcellini, P.

2002-07-01

This paper presents summary findings from a literature search of the term ''daylighting''-using natural light in a building to offset or replace electric lighting. According to the Department of Energy's Office of Building Technology, State and Community Programs 2000 BTS Core Databook, in 1998, commercial buildings consumed 32% of the total electricity in the United States, of which more than one-third went to lighting. Using daylighting systems and turning off the lights will help reduce this energy load. Electrical lighting adds to both the electrical and cooling loads in a commercial building. Utility costs can be decreased when daylighting is properly designed to replace electrical lighting. Along with the importance of energy savings, studies have demonstrated the non-energy-related benefits of daylighting. We compiled the data from books, periodicals, Internet articles, and interviews. The books, periodicals, and Internet articles provided the background information used to identify the main subjects of the paper. The interviews provided us with details related to specific buildings and companies that have integrated daylighting into their buildings.

Daylighting performance evaluation of a bottom-up motorized roller shade

Energy Technology Data Exchange (ETDEWEB)

Kapsis, K.; Athienitis, A.K.; Zmeureanu, R.G. [Department of Building, Civil and Environmental Engineering, Concordia University, Montreal, QC (Canada); Tzempelikos, A. [School of Civil Engineering, Purdue University, West Lafayette, IN (United States)

2010-12-15

This paper presents an experimental and simulation study for quantifying the daylighting performance of bottom-up roller shades installed in office spaces. The bottom-up shade is a motorized roller shade that opens from top to bottom operating in the opposite direction of a conventional roller shade, so as to cover the bottom part of the window, while allowing daylight to enter from the top part of the window, reaching deeper into the room. A daylighting simulation model, validated with full-scale experiments, was developed in order to establish correlations between the shade position, outdoor illuminance and work plane illuminance for different outdoor conditions. Then, a shading control algorithm was developed for application in any location and orientation. The validated model was employed for a sensitivity analysis of the impact of shade optical properties and control on the potential energy savings due to the use of daylighting. The results showed that Daylight Autonomy for the bottom-up shade is 8-58% higher compared to a conventional roller shade, with a difference of 46% further away from the facade, where the use of electric lighting is needed most of the time. The potential reduction in energy consumption for lighting is 21-41%. (author)

Energy savings due to daylight and artificial lighting integration in office buildings in hot climate

Energy Technology Data Exchange (ETDEWEB)

Al-Ashwal, Nagib T. [Sana' a University, Sana' a (Yemen); Budaiwi, Ismail M. [King Fahd University of Petroleum and Minerals, Dhahran (Saudi Arabia)

2011-07-01

Reducing energy consumption while maintaining acceptable environmental quality in buildings has been a challenging task for building professionals. In office buildings, artificial lighting systems are a major consumer of energy and can significantly contribute to building cooling load. Furthermore, although reliable, artificial lighting does not necessarily provide the required quality of lighting. Significant improvement in lighting quality and energy consumption can be achieved by proper integration of daylight and artificial lighting. The objective of this study is to investigate the energy performance of office buildings resulting from daylight and artificial lighting integration in hot climates. A parametric analysis is conducted to find the impact of different window design parameters, including window area, height and glazing type, on building energy performance. Results have shown that as much as 35% reduction in lighting energy consumption and 13% reduction in total energy consumption can be obtained when proper daylighting and artificial lighting integration is achieved.

Annual dynamics of daylight variability and contrast a simulation-based approach to quantifying visual effects in architecture

CERN Document Server

Rockcastle, Siobhan

2013-01-01

Daylight is a dynamic source of illumination in architectural space, creating diverse and ephemeral configurations of light and shadow within the built environment. Perceptual qualities of daylight, such as contrast and temporal variability, are essential to our understanding of both material and visual effects in architecture. Although spatial contrast and light variability are fundamental to the visual experience of architecture, architects still rely primarily on intuition to evaluate their designs because there are few metrics that address these factors. Through an analysis of contemporary

Lightpipe applications for daylighting systems

NARCIS (Netherlands)

Rosemann, A.; Kaase, H.

One of the main research activities of the Institute of Lighting at Technical University of Berlin concerns efficient daylight utilisation in buildings. In recent years, several national and international projects have been and are still carried out. One of them, the European research project

Phases of daylight and the stability of color perception in the near peripheral human retina.

Science.gov (United States)

Panorgias, Athanasios; Kulikowski, Janus J; Parry, Neil R A; McKeefry, Declan J; Murray, Ian J

2012-03-01

Typical daylight extends from blue (morning sky) to orangey red (evening sky) and is represented mathematically as the Daylight Locus in color space. In this study, we investigate the impact of this daylight variation on human color vision. Thirty-eight color normal human observers performed an asymmetric color match in the near peripheral visual field. Unique hues were identified using a naming paradigm. The observers' performance for matching was almost perfectly coincident with the Daylight Locus but declined markedly in other regions. Interobserver variability reached a conspicuous minimum adjacent to the Daylight Locus and was maximal in the red and yellowish-green regions. In the naming task, unique blue and yellow were virtually coincident with the Daylight Locus. The results suggest that the mechanisms of color perception mediated by the phylogenetically older (blue-yellow) color pathway have been strongly influenced by the different phases of daylight.

Proposal of the Tubular Daylight System Using Acrylonitrile Butadiene Styrene (ABS Metalized with Aluminum for Reflective Tube Structure

Directory of Open Access Journals (Sweden)

Anderson Diogo Spacek

2018-01-01

Full Text Available In the search for alternatives to reduce the consumption of electric energy, the possibility of using natural light for lighting through TDD (tubular daylight devices or TDGS (tubular daylight guidance systems appears. These natural luminaires are used in rooms where you want to save electricity and enjoy the benefits of natural light. The present work proposes the construction of a tubular system for the conduction of natural light that replaces aluminum with silver (currently marketed by several companies by polymer metallized with aluminum, offering a low cost. The polymer acrylonitrile butadiene styrene (ABS, coated with aluminum by physical vapor deposition (ionization, was evaluated for some tests to verify characteristics of the structure and the metallized surface. After the tests, the construction of the reflective tube was performed and validated in a real scale of application. The results proved the technical viability of the proposed tube construction for the realization of direct sunlight for illumination using polymeric material. Although it has produced 35% less than the reference tube, it can be marketed at an estimated cost of 50% less.

Theoretical and experimental analysis of daylight performance for various shading systems

Energy Technology Data Exchange (ETDEWEB)

Tsangrassoulis, A [Group Building Enviromental Studies, Lab. of Meteorology, Dept. of Applied Physics, Univ. of Athens (Greece); Santamouris, M [Group Building Enviromental Studies, Lab. of Meteorology, Dept. of Applied Physics, Univ. of Athens (Greece); Asimakopoulos, D [Group Building Enviromental Studies, Lab. of Meteorology, Dept. of Applied Physics, Univ. of Athens (Greece)

1997-12-31

The daylight coefficient approach is used for the theoretical analysis of various shading systems. Once a set of these coefficients has been calculated, it is very easy to calculate illuminance in the interior of a room under various sky luminance distributions. The present paper examines a method based on daylight coefficients to evaluate daylight in the interior of a room. The method is compared with existing radiosity and ray-tracing methods. The examined method is experimentaly validated using measurements obtained in a PASSYS test-cell equipped with shading devices. (orig.)

STRATEGI DAYLIGHTING PADA BANGUNAN MULTI-LANTAI DI ATAS DAN DI BAWAH PERMUKAAN TANAH

Directory of Open Access Journals (Sweden)

Danny Santoso Mintorogo

1999-01-01

Full Text Available One of the common factor for Energy Saving on buildings has dealed a lot with the lightings on building, especially for multi level floors above and below grade. In order for saving energy on lightings, many daylighting strategies on multi floors building are being used and under-developed by many architects. This paper discusses the strategies of the daylighting techniques on multi floors building both above and below grade Abstract in Bahasa Indonesia : Strategi hemat energi sangat erat hubungan dengan faktor penerangan dalam bangunan, lebih-lebih pada bangunan berlantai banyak diatas atau dibawah permukaan tanah. Untuk menghemat pemakaian energi listrik dari penerangan ini, maka strategi-strategi penerangan alami "Daylighting" terus dikembangkan. Tulisan ini bertujuan memaparkan berbagai strategi daylighting pada bangunan yang berlantai banyak yang dibangun diatas maupun dibawah permukaan tanah. Kata kunci : daylighting, energi

Impact of Extended Daylight Saving Time on National Energy Consumption Report to Congress

Energy Technology Data Exchange (ETDEWEB)

Belzer, D. B.; Hadley, S. W.; Chin, S-M.

2008-10-01

The Energy Policy Act of 2005 (Pub. L. No. 109-58; EPAct 2005) amended the Uniform Time Act of 1966 (Pub. L. No. 89-387) to increase the portion of the year that is subject to Daylight Saving Time. (15 U.S.C. 260a note) EPAct 2005 extended the duration of Daylight Saving Time in the spring by changing its start date from the first Sunday in April to the second Sunday in March, and in the fall by changing its end date from the last Sunday in October to the first Sunday in November. (15 U.S.C. 260a note) EPAct 2005 also called for the Department of Energy to evaluate the impact of Extended Daylight Saving Time on energy consumption in the United States and to submit a report to Congress. (15 U.S.C. 260a note) This report presents the results of impacts of Extended Daylight Saving Time on the national energy consumption in the United States. The key findings are: (1) The total electricity savings of Extended Daylight Saving Time were about 1.3 Tera Watt-hour (TWh). This corresponds to 0.5 percent per each day of Extended Daylight Saving Time, or 0.03 percent of electricity consumption over the year. In reference, the total 2007 electricity consumption in the United States was 3,900 TWh. (2) In terms of national primary energy consumption, the electricity savings translate to a reduction of 17 Trillion Btu (TBtu) over the spring and fall Extended Daylight Saving Time periods, or roughly 0.02 percent of total U.S. energy consumption during 2007 of 101,000 TBtu. (3) During Extended Daylight Saving Time, electricity savings generally occurred over a three- to five-hour period in the evening with small increases in usage during the early-morning hours. On a daily percentage basis, electricity savings were slightly greater during the March (spring) extension of Extended Daylight Saving Time than the November (fall) extension. On a regional basis, some southern portions of the United States exhibited slightly smaller impacts of Extended Daylight Saving Time on energy savings

Cutaneous leishmaniasis responds to daylight-activated photodynamic therapy

DEFF Research Database (Denmark)

Enk, C D; Nasereddin, A; Alper, R

2015-01-01

BACKGROUND: Cutaneous leishmaniasis (CL) is endemic in Israel, with hundreds of new cases reported in recent years. Photodynamic therapy (PDT) is highly effective for treatment of CL, but requires equipment available only at specialized centres. Daylight-activated PDT (DA-PDT) abolishes the need...... application of a thick layer of 16% methyl aminolaevulinate and 30-min occlusion, the lesions were exposed to daylight for 2·5 h. Treatment sessions were repeated at weekly intervals until clinical and microbiological cure. Control lesions were either treated with cryotherapy or left untreated. RESULTS...

Modified optical fiber daylighting system with sunlight transportation in free space.

Science.gov (United States)

Vu, Ngoc-Hai; Pham, Thanh-Tuan; Shin, Seoyong

2016-12-26

We present the design, optical simulation, and experiment of a modified optical fiber daylighting system (M-OFDS) for indoor lighting. The M-OFDS is comprised of three sub-systems: concentration, collimation, and distribution. The concentration part is formed by coupling a Fresnel lens with a large-core plastic optical fiber. The sunlight collected by the concentration sub-system is propagated in a plastic optical fiber and then collimated by the collimator, which is a combination of a parabolic mirror and a convex lens. The collimated beam of sunlight travels in free space and is guided to the interior by directing flat mirrors, where it is diffused uniformly by a distributor. All parameters of the system are calculated theoretically. Based on the designed system, our simulation results demonstrated a maximum optical efficiency of 71%. The simulation results also showed that sunlight could be delivered to the illumination destination at distance of 30 m. A prototype of the M-OFDS was fabricated, and preliminary experiments were performed outdoors. The simulation results and experimental results confirmed that the M-OFDS was designed effectively. A large-scale system constructed by several M-OFDSs is also proposed. The results showed that the presented optical fiber daylighting system is a strong candidate for an inexpensive and highly efficient application of solar energy in buildings.

Daylight as a building material

DEFF Research Database (Denmark)

Thule Kristensen, Peter; Madsen, Merete

2005-01-01

The article draws on examples to chronologically trace the use of daylight as building material in architecture of the 20th and early 21st century. The essay covers works of Mies van der Rohe, Le Corbusier, Erik Bryggman, Rudolf Schwarz, Alvar Aalto, Aldo Rossi, Jørn Utzon, Daniel Libeskind, Peter...

Daylighting Concepts for University Libraries and Their Influences on Users' Satisfaction

Science.gov (United States)

Kilic, Didem Kan; Hasirci, Deniz

2011-01-01

Daylighting, a controlled architectural tool that influences users' perception and behavior, in university libraries and their influences on users' preference and satisfaction was examined in this study. The effects of daylighting in coordination with visual comfort, on university library users were measured in relation to four environmental…

The impact of changing solar screen rotation angle and its opening aspect ratios on Daylight Availability in residential desert buildings

KAUST Repository

Sherif, Ahmed H.

2012-11-01

In desert sunny clear-sky regions solar penetration can become excessive. This can cause non-uniform daylight distribution, glare and high solar heat gain, affecting both visual and thermal comfort. Shading devices, such as solar screens, were usually used to diffuse and prevent direct solar penetration into spaces. This paper investigates the impact of changing solar screen axial rotation angle and screen opening aspect ratio on daylighting performance in a typical residential living room space under the desert sunny clear-sky. The larger aim is to arrive at efficient solar screen designs that suit the different orientations.The study was divided into three consecutive phases. In phase one, the effect of the two parameters on Daylight Availability was tested. The solar screen was axially rotated by three different angles at 10° increments. Also, the aspect ratio of the screen opening in both horizontal and vertical directions was changed systematically. Simulation was conducted using the annual Daylight Dynamic Performance Metrics (DDPMs). In phase two, the Annual Daylight Glare Probability (DGP) metric was evaluated for the cases that were found adequate in phase one. In the third phase, the annual solar energy transmittance through the screen was calculated for the cases that achieved acceptable performance in the two previous phases in order to identify the more energy efficient screens.Solar screens with openings having horizontal aspect ratios were found to be the most effective, while those with vertical aspect ratios were achieved the lowest performance. In the North orientation, since almost all the cases that were tested in this research provided acceptable daylighting performance, the designer now have a variety of options to choose from. Preference should be given to screen openings of horizontal aspect ratios, especially the 12:1 and 18:1 (H:V) screens that achieved the best performance where 92% of the space was " daylit" in comparison with only 53

Detailed simulations of lighting conditions in office rooms lit by daylight and artificial light

DEFF Research Database (Denmark)

Iversen, Anne

In this thesis the effect on the annual artificial lighting demand is investigated by employing detailed simulations of lighting conditions in office rooms lit by daylight and artificial. The simulations of the artificial lighting demand is accomplished through daylight simulations in Radiance....... The detailed simulations includes studies of the resolution of different weather data sets in climate-based daylight modeling. Furthermore, influence of the electrical lighting demand by simulating with dynamic occupancy patterns is studied. Finally the thesis explores the influence of obstructions in an urban...... canyon on the daylight availability within the buildings, and hence on the energy consumption for artificial lights. The results from the thesis demonstrates that the effect on the outcome of the daylight simulations when simulating with typical weather data files for the location of Copenhagen...

Design of farm winery façades for the optimisation of indoor natural lighting: a case study

Directory of Open Access Journals (Sweden)

Daniele Torreggiani

2013-06-01

Full Text Available This paper deals with the theme of daylighting performances of rural buildings, within a broader research context aimed at establishing design criteria for farm wineries. The objective is to benchmark the performances of different window systems in order to define design guidelines directed towards the optimisation of natural lighting to improve visual comfort and reduce energy consumption. A winegrowing and producing farm with standard features in the Emilia- Romagna region, Northern Italy, is considered as a case study. Particular attention was given to the part of the building designated for tasting activities. The study considered several opening solutions in the building envelope, and showed the effectiveness of those involving south façade glazing with appropriate screening systems. Further analyses will aim to investigate the performance of windows distributed on several fronts, including heat balance assessment.

Colour Mixing Based on Daylight

Science.gov (United States)

Meyn, Jan-Peter

2008-01-01

Colour science is based on the sensation of monochromatic light. In contrast to that, surface colours are caused by reflection of wide sections of the daylight spectrum. Non-spectral colours like magenta and purple appear homologous to colours with spectral hue, if the approach of mixing monochromatic light is abandoned. It is shown that a large…

The effect of different weather data sets and their resolution on climate-based daylight modelling

DEFF Research Database (Denmark)

Iversen, A; Svendsen, Svend; Nielsen, Toke Rammer

2013-01-01

Climate-based daylight modelling is based on the available weather data, which means that the weather data used as input to the daylight simulations are of great importance. In this paper, the effect on the outcome of the daylight simulations of using one weather data file rather than another...

Workshop report and proposal for a new IEA Task: Daylight in buildings

Energy Technology Data Exchange (ETDEWEB)

Kristensen, P E; Johnsen, K

1994-04-01

The IEA workshop on Daylight in Buildings was held in Copenhagen on March 14-16, 1994. At the workshop, presentations were given on key topics as a basis for discussions by the experts participating in the meeting. The presentations and discussions covered a range of technical, architectural and amenity aspects of daylighting in buildings. A great interest in research collaboration on daylight was expressed, and it was agreed that plenty of work still needs to be done, and that the appropriate form of work would be an IEA Task. It was agreed that daylighting systems and control strategies should be evaluated and tested in test rooms, as well as in existing buildings as case studies. Furthermore, the workshop expressed that one of the best ways to realize and present the Task results to practice would be through a few demonstration buildings, build in different countries and under different climatic conditions. (EG)

Predicting daylight illuminance on inclined surfaces using sky luminance data

Energy Technology Data Exchange (ETDEWEB)

Li, D.H.W.; Lau, C.C.S.; Lam, J.C. [City University of Hong Kong, Kowloon (China). Dept. of Building and Construction

2005-07-01

Daylight illuminance, particularly on vertical surfaces, plays a major role in determining and evaluating the daylighting performance of a building. In many parts of the world, however, the basic daylight illuminance data for various vertical planes are not always readily available. The usual method to obtain diffuse illuminance on tilted planes would be based on inclined surface models using data from the horizontal measurements. Alternatively, the diffuse illuminance on a sloping plane can be computed by integrating the luminance distribution of the sky 'seen' by the plane. This paper presents an approach to estimate the vertical outdoor illuminance from sky luminance data and solar geometry. Sky luminance data recorded from January 1999 to December 2001 in Hong Kong and generated by two well-known sky luminance models (Kittler and Perez) were used to compute the outdoor illuminance for the four principal vertical planes (N, E, S and W). The performance of this approach was evaluated against data measured in the same period. Statistical analysis indicated that using sky luminance distributions to predict outdoor illuminance can give reasonably good agreement with measured data for all vertical surfaces. The findings provide an accurate alternative to determine the amount of daylight on vertical as well as other inclined surfaces when sky luminance data are available. (author)

Alternatives to Outdoor Daylight Illumination for Photodynamic Therapy—Use of Greenhouses and Artificial Light Sources

Directory of Open Access Journals (Sweden)

Catharina M. Lerche

2016-02-01

Full Text Available Daylight-mediated photodynamic therapy (daylight PDT is a simple and pain free treatment of actinic keratoses. Weather conditions may not always allow daylight PDT outdoors. We compared the spectrum of five different lamp candidates for indoor “daylight PDT” and investigated their ability to photobleach protoporphyrin IX (PpIX. Furthermore, we measured the amount of PpIX activating daylight available in a glass greenhouse, which can be an alternative when it is uncomfortable for patients to be outdoors. The lamps investigated were: halogen lamps (overhead and slide projector, white light-emitting diode (LED lamp, red LED panel and lamps used for conventional PDT. Four of the five light sources were able to photobleach PpIX completely. For halogen light and the red LED lamp, 5000 lux could photobleach PpIX whereas 12,000 lux were needed for the white LED lamp. Furthermore, the greenhouse was suitable for daylight PDT since the effect of solar light is lowered only by 25%. In conclusion, we found four of the five light sources and the greenhouse usable for indoor daylight PDT. The greenhouse is beneficial when the weather outside is rainy or windy. Only insignificant ultraviolet B radiation (UVB radiation passes through the greenhouse glass, so sun protection is not needed.

Daylight levels during the solar eclipse of 11 August 1999

Science.gov (United States)

Darula, S.; Kambezidis, H. D.; Kittler, R.

Solar eclipses are unique phenomena not only for astronomical and space observations but also for terrestrial; they create unique conditions of sunbeam blockage which cause not only the reduction of direct sunlight but also the dimming of skylight from the whole sky vault. Very favorable conditions were met during the recent August 1999 solar eclipse in Athens, Greece and Bratislava, Slovakia. General class daylight stations operate within the International Daylight Measurements Program in the two cities. One-minute data of global/diffuse illuminance and zenith luminance from those stations have been used to provide information about their levels and the daylight reduction rate during the eclipse. An approximate formula for the estimation of sunlight and skylight illuminance levels as well as zenith luminance using relative luminance sky patterns is also presented in this work. To achieve this, recently developed sky standards together with their parameterizations are utilized.

NATURAL LIGHTING OF DEEP ARCHITECTURAL SPACE: THE PERCEPTION OF NEW ZEALAND ARCHITECTS

Directory of Open Access Journals (Sweden)

Richard Barrett

2008-07-01

Full Text Available The paper considers aspects of a survey carried out amongst a group of registered New Zealand architects in order to establish their knowledge and experience in using core-daylighting systems and methods (Barrett, 2003. Core-daylighting comprises systems and methods for bringing natural light into deep architectural space where conventional methods (such as windows and skylights cannot readily be used. Examples of these methods are: atria (Matusiak, 1998, sun tracking heliostats, sun and light pipes, light scoops, Fresnel lenses, anidolic zenithal systems, prismatic daylight systems, light shelves, tapping mirrors, light reflectors and louvres (Littlefair, 1991, 1996 & 2000, lightwells, internal courts (Lam, 1986, fibre optic cable (Kay,1999, and other systems for light re-direction. The survey was carried out using a questionnaire as described below (Survey Methods. The findings were analysed, resulting in a clear indication that the respondents were not especially experienced or knowledgeable, and a majority felt this to be an area of their skill base in need of development. Whilst the survey was strictly intended to gather quantitative material, respondents were invited to comment freely as they progressed through to completion of the questionnaire. This paper draws on this qualitative data as an insight into several areas, including the attitudes of respondents towards their clients when making decisions about designing buildings for natural daylighting.

Mathematical model quantifies multiple daylight exposure and burial events for rock surfaces using luminescence dating

International Nuclear Information System (INIS)

Freiesleben, Trine; Sohbati, Reza; Murray, Andrew; Jain, Mayank; Al Khasawneh, Sahar; Hvidt, Søren; Jakobsen, Bo

2015-01-01

Interest in the optically stimulated luminescence (OSL) dating of rock surfaces has increased significantly over the last few years, as the potential of the method has been explored. It has been realized that luminescence-depth profiles show qualitative evidence for multiple daylight exposure and burial events. To quantify both burial and exposure events a new mathematical model is developed by expanding the existing models of evolution of luminescence–depth profiles, to include repeated sequential events of burial and exposure to daylight. This new model is applied to an infrared stimulated luminescence-depth profile from a feldspar-rich granite cobble from an archaeological site near Aarhus, Denmark. This profile shows qualitative evidence for multiple daylight exposure and burial events; these are quantified using the model developed here. By determining the burial ages from the surface layer of the cobble and by fitting the new model to the luminescence profile, it is concluded that the cobble was well bleached before burial. This indicates that the OSL burial age is likely to be reliable. In addition, a recent known exposure event provides an approximate calibration for older daylight exposure events. This study confirms the suggestion that rock surfaces contain a record of exposure and burial history, and that these events can be quantified. The burial age of rock surfaces can thus be dated with confidence, based on a knowledge of their pre-burial light exposure; it may also be possible to determine the length of a fossil exposure, using a known natural light exposure as calibration. - Highlights: • Evidence for multiple exposure and burial events in the history of a single cobble. • OSL rock surface dating model improved to include multiple burial/exposure cycles. • Application of the new model quantifies burial and exposure events.

Study of effect of daylight on Building User's Performance Based on Electroencephalograph Signal

NARCIS (Netherlands)

Mangkuto, R.A.; Soelami, F.X.N.; Suprijanto, S.

2009-01-01

The use of daylighting in building nowadays has become one alternative to save electric energy consumption, particularly during daytime. Daylight is not only useful for reducing cost from electric light sources, but also give benefits both physiologically and psychologically for building users.

A randomized, multicentre study of directed daylight exposure times of 11/2 vs. 21/2 h in daylight-mediated photodynamic therapy with methyl aminolaevulinate in patients with multiple thin actinic keratoses of the face and scalp

DEFF Research Database (Denmark)

Wiegell, S.R.; Fabricius, S.; Philipsen, P.A.

2011-01-01

, time of day or time of year during which the treatment was performed. Treatment was well tolerated, with a mean ± SD maximal pain score of 1·3 ± 1·5. Conclusions: Daylight-mediated MAL-PDT is an effective, convenient and nearly pain-free treatment for patients with multiple thin AKs. Daylight-mediated......, the inconvenience of clinic attendance and discomfort during therapy are significant drawbacks. Daylight-mediated PDT could potentially reduce these and may serve as an alternative to conventional PDT. Objectives: To compare the efficacy of methyl aminolaevulinate (MAL)-PDT with 11/2 vs. 21/2 h of daylight exposure...

Seasonality in trauma admissions - Are daylight and weather variables better predictors than general cyclic effects?

Science.gov (United States)

Røislien, Jo; Søvik, Signe; Eken, Torsten

2018-01-01

Trauma is a leading global cause of death, and predicting the burden of trauma admissions is vital for good planning of trauma care. Seasonality in trauma admissions has been found in several studies. Seasonal fluctuations in daylight hours, temperature and weather affect social and cultural practices but also individual neuroendocrine rhythms that may ultimately modify behaviour and potentially predispose to trauma. The aim of the present study was to explore to what extent the observed seasonality in daily trauma admissions could be explained by changes in daylight and weather variables throughout the year. Retrospective registry study on trauma admissions in the 10-year period 2001-2010 at Oslo University Hospital, Ullevål, Norway, where the amount of daylight varies from less than 6 hours to almost 19 hours per day throughout the year. Daily number of admissions was analysed by fitting non-linear Poisson time series regression models, simultaneously adjusting for several layers of temporal patterns, including a non-linear long-term trend and both seasonal and weekly cyclic effects. Five daylight and weather variables were explored, including hours of daylight and amount of precipitation. Models were compared using Akaike's Information Criterion (AIC). A regression model including daylight and weather variables significantly outperformed a traditional seasonality model in terms of AIC. A cyclic week effect was significant in all models. Daylight and weather variables are better predictors of seasonality in daily trauma admissions than mere information on day-of-year.

Daylight saving time transitions and hospital treatments due to accidents or manic episodes

Directory of Open Access Journals (Sweden)

Lönnqvist Jouko

2008-02-01

Full Text Available Abstract Background Daylight saving time affects millions of people annually but its impacts are still widely unknown. Sleep deprivation and the change of circadian rhythm can trigger mental illness and cause higher accident rates. Transitions into and out of daylight saving time changes the circadian rhythm and may cause sleep deprivation. Thus it seems plausible that the prevalence of accidents and/or manic episodes may be higher after transition into and out of daylight saving time. The aim of this study was to explore the effects of transitions into and out of daylight saving time on the incidence of accidents and manic episodes in the Finnish population during the years of 1987 to 2003. Methods The nationwide data were derived from the Finnish Hospital Discharge Register. From the register we obtained the information about the hospital-treated accidents and manic episodes during two weeks before and two weeks after the transitions in 1987–2003. Results The results were negative, as the transitions into or out of daylight saving time had no significant effect on the incidence of accidents or manic episodes. Conclusion One-hour transitions do not increase the incidence of manic episodes or accidents which require hospital treatment.

Daylight saving time transitions and hospital treatments due to accidents or manic episodes

Science.gov (United States)

Lahti, Tuuli A; Haukka, Jari; Lönnqvist, Jouko; Partonen, Timo

2008-01-01

Background Daylight saving time affects millions of people annually but its impacts are still widely unknown. Sleep deprivation and the change of circadian rhythm can trigger mental illness and cause higher accident rates. Transitions into and out of daylight saving time changes the circadian rhythm and may cause sleep deprivation. Thus it seems plausible that the prevalence of accidents and/or manic episodes may be higher after transition into and out of daylight saving time. The aim of this study was to explore the effects of transitions into and out of daylight saving time on the incidence of accidents and manic episodes in the Finnish population during the years of 1987 to 2003. Methods The nationwide data were derived from the Finnish Hospital Discharge Register. From the register we obtained the information about the hospital-treated accidents and manic episodes during two weeks before and two weeks after the transitions in 1987–2003. Results The results were negative, as the transitions into or out of daylight saving time had no significant effect on the incidence of accidents or manic episodes. Conclusion One-hour transitions do not increase the incidence of manic episodes or accidents which require hospital treatment. PMID:18302734

Passive solar offices: integrated design

Energy Technology Data Exchange (ETDEWEB)

Evans, B

1992-05-06

Passive solar design in out-of-town offices can remove the need for air-conditioning by making greater use of daylight and natural ventilation. To promote the use of passive solar energy a series of design studies are being run by the Energy Technology Support Unit on behalf of the Department of Energy. The three reported here are designs for out-of-town business buildings. Each is a hypothetical building designed to a realistic brief for an organisation taking the role of real client. (author).

Thermal and Daylighting Performance of Energy-Efficient Windows in Highly Glazed Residential Buildings: Case Study in Korea

Directory of Open Access Journals (Sweden)

Chang Heon Cheong

2014-10-01

Full Text Available Cooling load in highly glazed residential building can be excessively large due to uncontrolled solar energy entering the indoor space. This study focuses on the cooling load reduction and changes in the daylighting properties via the application of a double window system (DWS with shading with various surface reflectivities in highly glazed residential buildings. Evaluation of thermal and daylighting performances is carried out using simulation tools. The reductions in cooling load and energy cost through the use of DWS are evaluated through a comparative simulation considering conventional windows: a single window and a double window. Three variables of window types, natural ventilation, and shading reflectivity are reflected in the study. According to our results, implementation of DWS reduced cooling load by 43%–61%. Electricity cost during the cooling period was reduced by a maximum of 24%. However, a shading device setting that prioritizes effective cooling load reduction can greatly decrease the daylighting factor and luminance level of indoor space. A DWS implementing shading device with highly reflective at all surfaces is appropriate option for the more comfortable thermal and visual environment, while a shading device with low reflectivity at rear of the surface can contribute an additional 4% cooling load reduction.

Sunscope natural light systems : tubular skylights

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

This brochure described a tubular skylight designed by Sunscope Natural Light Systems. The Sunscope is a super-reflective light system in which daylight is reflected down a cylinder to a translucent ceiling fixture that diffuses natural light throughout the room in which it is placed. The Sunscope requires no structure changes, is installed in less than 3 hours, and requires no drywall repairs or repainting. The system eliminates the need for daytime electric lighting, and causes no winter heat losses or summer heat gains. Available in 3 sizes, the Sunscope has no moving parts and is fully maintenance-free. The system was designed for use in commercial and residential applications. 7 figs.

Performance of a daylight redirecting glass shading system demonstration in an office building

DEFF Research Database (Denmark)

Appelfeld, David; Svendsen, Svend; Traberg-Borup, Steen

2011-01-01

This paper evaluates the daylighting performance of a prototype external dynamic integrated shading and light redirecting system. The demonstration project was carried out on a building with an open-plan office. The prototype and original façades were placed on the same floor with the same...... orientation and similar surroundings. The existing façade was used as the reference for measurements and simulations. The focus of this research project was to employ available simulation tools for the system performance evaluation. This was accompanied by measurements of the daylight conditions...... in the investigated space. The prototype system improved daylighting conditions compared to the existing shading system....

Teaching Science: Beats the Daylight Out of Me.

Science.gov (United States)

Leyden, Michael B.

1995-01-01

Presents activities for observing, measuring, collecting, and graphing data about times of sunrise and sunset to teach an understanding about arrival of Daylight Savings Time in April. Also discusses seasonal affective disorder (SAD). (TM)

Daylight Utilization with Light Pipe in Farm Animal Production: A Simulation Approach

Directory of Open Access Journals (Sweden)

Alejandro Pacheco Diéguez’

2016-06-01

Full Text Available Light pipes offer a passive way to bring daylight inside deep buildings, such as agricultural buildings. However, the lack of reliable performance predictability methods for light pipes represents a major obstacle preventing their widespread use. This paper evaluates a simulation approach for performance prediction and identifies key light pipe design parameters affecting their daylight transmission performance. The study was carried out through continuous monitoring of daylight in two full-scale, identical pig stables fitted with two light pipe systems, Solatube® and Velux®. The experiment included three continuously measuring sensors in each stable and an outdoor sensor during 2013 and 2014. A forward raytracing tool, TracePro®, was used for illuminance prediction and parametric simulations. The simulation results for overcast skies indicated discrepancies between the simulated and average measurement results below 30% in all cases. The discrepancies for clear skies were somewhat higher, i.e., below 30% for 67% of the cases. The higher discrepancies with clear skies were due to the overestimation of absolute sunlight levels and absence of an advanced and detailed optical characterization of the dome collector’s surface. The parametric results have shown that light pipes’ performance is better during summer time, in sunny climates, at low to mid-latitudes, which provides higher solar altitudes than during winter and cloudy climates at high latitudes. Methods to improve the luminous transmittance for low solar altitudes occurring in Scandinavia include: bending or tilting the pipe, increasing the aspect ratio, improving the pipe specular reflectance, tilting the collector to the south, and using optical redirecting system in the collector.

Daylight and health: A review of the evidence and consequences for the built environment

NARCIS (Netherlands)

M.P.J. Aarts; Joost van Hoof; M.B.C. Aries

2015-01-01

Daylight has been associated with multiple health advantages. Some of these claims are associations, hypotheses or beliefs. This review presents an overview of a scientific literature search on the proven effects of daylight exposure on human health. Studies were identified with a search strategy

Performance of integrated systems of automated roller shade systems and daylight responsive dimming systems

Energy Technology Data Exchange (ETDEWEB)

Park, Byoung-Chul; Choi, An-Seop; Jeong, Jae-Weon [Department of Architectural Engineering, Sejong University, Kunja-Dong, Kwangjin-Gu, Seoul (Korea, Republic of); Lee, Eleanor S. [Building Technologies Department, Lawrence Berkeley National Laboratory, Berkeley, CA (United States)

2011-03-15

Daylight responsive dimming systems have been used in few buildings to date because they require improvements to improve reliability. The key underlying factor contributing to poor performance is the variability of the ratio of the photosensor signal to daylight workplane illuminance in accordance with sun position, sky condition, and fenestration condition. Therefore, this paper describes the integrated systems between automated roller shade systems and daylight responsive dimming systems with an improved closed-loop proportional control algorithm, and the relative performance of the integrated systems and single systems. The concept of the improved closed-loop proportional control algorithm for the integrated systems is to predict the varying correlation of photosensor signal to daylight workplane illuminance according to roller shade height and sky conditions for improvement of the system accuracy. In this study, the performance of the integrated systems with two improved closed-loop proportional control algorithms was compared with that of the current (modified) closed-loop proportional control algorithm. In the results, the average maintenance percentage and the average discrepancies of the target illuminance, as well as the average time under 90% of target illuminance for the integrated systems significantly improved in comparison with the current closed-loop proportional control algorithm for daylight responsive dimming systems as a single system. (author)

Balancing the daylighting and energy performance of solar screens in residential desert buildings: Examination of screen axial rotation and opening aspect ratio

KAUST Repository

Sabry, Hanan

2014-05-01

Solar screens are typically used to control solar access into building spaces. They proved their usefulness in improving the daylighting and energy performance of buildings in the hot arid desert environments which are endowed with abundance of clear skies.The daylighting and energy performance of solar screens is affected by many parameters. These include screen perforation, depth, reflectivity and color, aspect ratio of openings, shape, tilt angle and rotation. Changing some of these parameters can improve the daylighting performance drastically. However, this can result in increased energy consumption. A balanced solution must be sought, where acceptable daylighting performance would be achieved at minimum energy consumption.This paper aims at defining solar screen designs that achieve visual comfort and at the same time minimum energy consumption in residential desert settings. The study focused on the effect of changing the solar screen axial rotation and the aspect ratio of its openings under the desert clear-sky. The individual and combined effects of changing these parameters were studied.Results of this study demonstrated that a non-rotated solar screen that has wide horizontal openings (aspect ratio of 18:1) proved to be successful in the north and south orientations. Its performance in the east/west orientations was also superior. In contrast, the screen that was rotated along its vertical axis while having small size openings (aspect ratio of 1:1) proved to be more successful in the east/west orientations. Its performance in the north orientation was also good. These solutions enhanced daylighting performance, while maintaining the energy consumption at a minimum.Moreover, it was observed that combining two screen parameters which proved useful in previous studies on daylighting or thermal performance does not add up to better solutions. The combined solutions that were tested in this study did not prove successful in satisfying daylighting and thermal

Seasonality in trauma admissions – Are daylight and weather variables better predictors than general cyclic effects?

Science.gov (United States)

Søvik, Signe; Eken, Torsten

2018-01-01

Background Trauma is a leading global cause of death, and predicting the burden of trauma admissions is vital for good planning of trauma care. Seasonality in trauma admissions has been found in several studies. Seasonal fluctuations in daylight hours, temperature and weather affect social and cultural practices but also individual neuroendocrine rhythms that may ultimately modify behaviour and potentially predispose to trauma. The aim of the present study was to explore to what extent the observed seasonality in daily trauma admissions could be explained by changes in daylight and weather variables throughout the year. Methods Retrospective registry study on trauma admissions in the 10-year period 2001–2010 at Oslo University Hospital, Ullevål, Norway, where the amount of daylight varies from less than 6 hours to almost 19 hours per day throughout the year. Daily number of admissions was analysed by fitting non-linear Poisson time series regression models, simultaneously adjusting for several layers of temporal patterns, including a non-linear long-term trend and both seasonal and weekly cyclic effects. Five daylight and weather variables were explored, including hours of daylight and amount of precipitation. Models were compared using Akaike’s Information Criterion (AIC). Results A regression model including daylight and weather variables significantly outperformed a traditional seasonality model in terms of AIC. A cyclic week effect was significant in all models. Conclusion Daylight and weather variables are better predictors of seasonality in daily trauma admissions than mere information on day-of-year. PMID:29425210

Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office testbed

Energy Technology Data Exchange (ETDEWEB)

Thanachareonkit, Anothai; Lee, Eleanor S.; McNeil, Andrew

2013-08-31

Daylight redirecting systems with vertical windows have the potential to offset lighting energy use in deep perimeter zones. Microstructured prismatic window films can be manufactured using low-cost, roll-to-roll fabrication methods and adhered to the inside surface of existing windows as a retrofit measure or installed as a replacement insulating glass unit in the clerestory portion of the window wall. A clear film patterned with linear, 50-250 micrometer high, four-sided asymmetrical prisms was fabricated and installed in the south-facing, clerestory low-e, clear glazed windows of a full-scale testbed facility. Views through the film were distorted. The film was evaluated in a sunny climate over a two-year period to gauge daylighting and visual comfort performance. The daylighting aperture was small (window-towall ratio of 0.18) and the lower windows were blocked off to isolate the evaluation to the window film. Workplane illuminance measurements were made in the 4.6 m (15 ft) deep room furnished as a private office. Analysis of discomfort glare was conducted using high dynamic range imaging coupled with the evalglare software tool, which computes the daylight glare probability and other metrics used to evaluate visual discomfort. The window film was found to result in perceptible levels of discomfort glare on clear sunny days from the most conservative view point in the rear of the room looking toward the window. Daylight illuminance levels at the rear of the room were significantly increased above the reference window condition, which was defined as the same glazed clerestory window but with an interior Venetian blind (slat angle set to the cut-off angle), for the equinox to winter solstice period on clear sunny days. For partly cloudy and overcast sky conditions, daylight levels were improved slightly. To reduce glare, the daylighting film was coupled with a diffusing film in an insulating glazing unit. The diffusing film retained the directionality of the

Alternatives to Outdoor Daylight Illumination for Photodynamic Therapy—Use of Greenhouses and Artificial Light Sources

DEFF Research Database (Denmark)

Lerche, Catharina; Heerfordt, Ida M; Heydenreich, Jakob

2016-01-01

to photobleach protoporphyrin IX (PpIX). Furthermore, we measured the amount of PpIX activating daylight available in a glass greenhouse, which can be an alternative when it is uncomfortable for patients to be outdoors. The lamps investigated were: halogen lamps (overhead and slide projector), white light...... was suitable for daylight PDT since the effect of solar light is lowered only by 25%. In conclusion, we found four of the five light sources and the greenhouse usable for indoor daylight PDT. The greenhouse is beneficial when the weather outside is rainy or windy. Only insignificant ultraviolet B radiation...

Fatal alcohol-related traffic crashes increase subsequent to changes to and from daylight savings time.

Science.gov (United States)

Hicks, G J; Davis, J W; Hicks, R A

1998-06-01

On the hypothesis that sleepiness and alcohol interact to increase the risk of alcohol-related traffic fatalities, the percentages of alcohol-related fatal traffic crashes were assessed for the entire state of New Mexico for the years 1989-1992, for each of the seven days that preceded the changes to and from Daylight Savings Time and for each of the 14 days which followed the changes to and from Daylight Savings Time. Consistent with our hypothesis the percentage of alcohol-related fatal crashes increased significantly during the first seven days after these changes in Daylight Savings Time.

Influence of daylight on the fate of silver and zinc oxide nanoparticles in natural aquatic environments.

Science.gov (United States)

Odzak, Niksa; Kistler, David; Sigg, Laura

2017-07-01

Nanoparticles, such as silver (Ag-NP) and zinc oxide (ZnO-NP), are increasingly used in many consumer products. These nanoparticles (NPs) will likely be exposed to the aquatic environment (rain, river, lake water) and to light (visible and UV) in the products where they are applied, or after those products are discharged. Dissolution of Ag-NP and ZnO-NP is an important process because the dissolved Ag + and Zn 2+ are readily available and toxic for aquatic organisms. The objective of this study was to investigate the role of daylight (UV and visible) for the fate of engineered Ag-NP and ZnO-NPs in different types of natural waters. Ag-NP and ZnO-NP were exposed to rainwater, river Rhine, and lake waters (Greifen, Lucerne, Cristallina, Gruère) under different light conditions (no light, UV 300-400 nm and visible light 400-700 nm) for up to 8 days. Stronger agglomeration of Ag-NP was observed in the waters with higher ionic strength in comparison to those with lower ionic strength. Visible light tended to increase the dissolution of Ag-NP under most natural water conditions in comparison to dark conditions, whereas UV-light led to decreased dissolved Ag + after longer exposure time. These effects illustrate the dynamic interactions of Ag-NP with light, which may lead both to increased oxidation and to increased reduction of Ag + by organic compounds under UV-light. In the case of ZnO-NP, agglomeration occurred at higher ionic strength, but the effects of pH were predominant for dissolution, which occurred up to concentrations close to the solubility limit of ZnO(s) at pH around 8.2 and to nearly complete dissolution of ZnO-NP at lower pH (pH 4.8-6.5), with both visible and UV-light facilitating dissolution. This study thus shows that light conditions play an important role in the dissolution processes of nanoparticles. Copyright © 2017 Elsevier Ltd. All rights reserved.

Daylight metrics and energy savings

Energy Technology Data Exchange (ETDEWEB)

Mardaljevic, John; Heschong, Lisa; Lee, Eleanor

2009-12-31

The drive towards sustainable, low-energy buildings has increased the need for simple, yet accurate methods to evaluate whether a daylit building meets minimum standards for energy and human comfort performance. Current metrics do not account for the temporal and spatial aspects of daylight, nor of occupants comfort or interventions. This paper reviews the historical basis of current compliance methods for achieving daylit buildings, proposes a technical basis for development of better metrics, and provides two case study examples to stimulate dialogue on how metrics can be applied in a practical, real-world context.

effect of daylight hours on performance of growing grasscutters

African Journals Online (AJOL)

user

DNA.Many animals use the daily variation in the duration and quantity of melatonin ... such as reproduction, behavior, coat growth and ... behavioral processes in the biological system. The ... spends the daylight hours sleeping or resting. The.

A Study on the Optimal Duration of Daylight Saving Time (DST in Korea

Directory of Open Access Journals (Sweden)

Byeong-Hee Mihn

2009-09-01

Full Text Available Daylight saving time aims at spending effective daylight in summer season. Korea had enforced daylight saving time twelve times from 1948 to 1988. Since 1988, it is not executed, but it is recently discussed the resumption of DST. In this paper, we investigate the trend of DST in other countries, review the history of DST in Korea, and suggest the optimal DST duration in terms of astronomical aspects (times of sunrise and sunset. We find that the starting day of DST in Korea is apt for the second Sunday in Mayor the second Sunday in April according to the time of sunrise or to the difference between Korean standard meridian and observer`s, respectively. We also discuss time friction that might be caused by time difference between DST and Korea Standard Time (KST.

Impact of windows and daylight exposure on overall health and sleep quality of office workers: a case-control pilot study.

Science.gov (United States)

Boubekri, Mohamed; Cheung, Ivy N; Reid, Kathryn J; Wang, Chia-Hui; Zee, Phyllis C

2014-06-15

This research examined the impact of daylight exposure on the health of office workers from the perspective of subjective well-being and sleep quality as well as actigraphy measures of light exposure, activity, and sleep-wake patterns. Participants (N = 49) included 27 workers working in windowless environments and 22 comparable workers in workplaces with significantly more daylight. Windowless environment is defined as one without any windows or one where workstations were far away from windows and without any exposure to daylight. Well-being of the office workers was measured by Short Form-36 (SF-36), while sleep quality was measured by Pittsburgh Sleep Quality Index (PSQI). In addition, a subset of participants (N = 21; 10 workers in windowless environments and 11 workers in workplaces with windows) had actigraphy recordings to measure light exposure, activity, and sleep-wake patterns. Workers in windowless environments reported poorer scores than their counterparts on two SF-36 dimensions--role limitation due to physical problems and vitality--as well as poorer overall sleep quality from the global PSQI score and the sleep disturbances component of the PSQI. Compared to the group without windows, workers with windows at the workplace had more light exposure during the workweek, a trend toward more physical activity, and longer sleep duration as measured by actigraphy. We suggest that architectural design of office environments should place more emphasis on sufficient daylight exposure of the workers in order to promote office workers' health and well-being.

Daylight-mediated photodynamic therapy of moderate to thick actinic keratoses of the face and scalp

DEFF Research Database (Denmark)

Wiegell, S.R.; Fabricius, S.; Philipsen, P.A.

2012-01-01

response rate and light dose in patients who received an effective light dose of > 3·5 J cm . Conclusions: Daylight-mediated PDT of moderate to thick AKs was less effective than daylight-mediated PDT of thin AKs especially in some centres. However, nearly all thicker lesions (grades II and III) were...

Application of a spectral sky in Radiance for daylighting calculations including non-image-forming light effects

NARCIS (Netherlands)

Khademagha, P.; Aries, M.B.C.; Rosemann, A.L.P.; van Loenen, E.J.

2016-01-01

Daylight is dynamic and rich in the blue part of the spectrum. To date, the spectral composition of daylight is ignored in sky models used in Radiance. Spectral sky composition is particularly important when non-image-forming (NIF) light effects are concerned, since the action spectrum for these

Daylight Savings Time Transitions and the Incidence Rate of Unipolar Depressive Episodes.

Science.gov (United States)

Hansen, Bertel T; Sønderskov, Kim M; Hageman, Ida; Dinesen, Peter T; Østergaard, Søren D

2017-05-01

Daylight savings time transitions affect approximately 1.6 billion people worldwide. Prior studies have documented associations between daylight savings time transitions and adverse health outcomes, but it remains unknown whether they also cause an increase in the incidence rate of depressive episodes. This seems likely because daylight savings time transitions affect circadian rhythms, which are implicated in the etiology of depressive disorder. Therefore, we investigated the effects of daylight savings time transitions on the incidence rate of unipolar depressive episodes. Using time series intervention analysis of nationwide data from the Danish Psychiatric Central Research Register from 1995 to 2012, we compared the observed trend in the incidence rate of hospital contacts for unipolar depressive episodes after the transitions to and from summer time to the predicted trend in the incidence rate. The analyses were based on 185,419 hospital contacts for unipolar depression and showed that the transition from summer time to standard time were associated with an 11% increase (95% CI = 7%, 15%) in the incidence rate of unipolar depressive episodes that dissipated over approximately 10 weeks. The transition from standard time to summer time was not associated with a parallel change in the incidence rate of unipolar depressive episodes. This study shows that the transition from summer time to standard time was associated with an increase in the incidence rate of unipolar depressive episodes. Distress associated with the sudden advancement of sunset, marking the coming of a long period of short days, may explain this finding. See video abstract at, http://links.lww.com/EDE/B179.

Analysis of daylight calculated using the EnergyPlus programme

Energy Technology Data Exchange (ETDEWEB)

Ramos, Greici; Ghisi, Enedir [Universidade Federal de Santa Catarina, Departamento de Engenharia Civil, Laboratorio de Eficiencia Energetica em Edificacoes, Caixa Postal 476, Florianopolis - SC 88040-900 (Brazil)

2010-09-15

In order to properly evaluate the thermal energy performance of buildings it is also necessary to analyse the use of daylight, since this influences the thermal load of a building. In this context, the aim of this study was to evaluate the calculation of internal illuminances carried out using the EnergyPlus simulation programme. The analysis was carried out through a comparison of the Useful Daylight Illuminances (UDI) and the daylight factor (DF) estimated using the EnergyPlus programme with the results from another two programmes: Daysim/Radiance and TropLux. Also, the external horizontal illuminance estimated using EnergyPlus was compared with that measured in Florianopolis, Santa Catarina State, Brazil, between 2003 and 2005. The simulations were carried out for three different rooms: one square (5 m x 5 m x 3 m), one shallow rectangular (10 m x 5 m x 3 m) and one deep rectangular (5 m x 10 m x 3 m). From this analysis it was verified that the EnergyPlus programme has a problem related to both the DF and the external illuminance values. A comparison between the DF values calculated using the three programmes shows that there is a problem in EnergyPlus related to solving the internal reflection, such that the greater the importance of the portion of light reflected, the greater the difference found between the programmes. A comparison between the calculated and measured external horizontal illuminances shows differences greater than 100% both for the diffuse and direct illuminances indicating that the EnergyPlus programme overestimates these values. (author)

Impact of shading on daylight quality. Simulations with radiance

Energy Technology Data Exchange (ETDEWEB)

Dubois, M.C.

2001-07-01

The impact of six exterior shading devices on daylight quality and on the potential for daylight utilisation in a standard, south-oriented office room was investigated through computer simulations with Radiance. The daylight quality was evaluated by considering four performance indicators: the absolute work plane illuminance, the illuminance uniformity on the work plane, the absolute luminance in the visual field and the luminance ratios between the work plane, VDT screen and surrounding surfaces. The results indicate that the overhang, white awning and horizontal venetian blind generated work plane illuminance levels that are more suitable for offices where traditional tasks are carried out. However, these devices did not prevent high luminance values at the window. On the other hand, the grey specular screen produced unacceptably low work plane illuminance, poor illuminance uniformity and unacceptably low luminance levels which resulted in unsuitable luminance ratios between the VDT screen, work plane and surroundings. The 45 deg venetian blind, white screen and blue awning provided work plane illuminance levels suitable for offices where a combination of paper and computer work is carried out. They also provided acceptable illuminance uniformity on the work plane, suitable luminance ratios between the work plane, VDT screen and surroundings and they significantly reduced the luminance of the window. However, the blue awning had a poorer performance in December than in June and the white screen resulted in high luminance values at the window, which indicates that the best device among the ones studied was the 45 deg venetian blind.

A review of methods for the evaluation of the energy contribution of daylight in buildings

Energy Technology Data Exchange (ETDEWEB)

Attenborough, M; Goodwin, A

1996-07-01

A review has been undertaken of energy prediction methods and daylight calculation methods currently in use in the UK. This was based on a literature review and discussions with large engineering practices and academics involved in the areas of daylighting and energy simulation research. The aim of this review was to identify manual methods or computer programs that are capable of determining energy use in non-domestic buildings and of taking into account the energy savings resulting from daylighting. One potential application for these methods is in supporting anticipated energy targets for non-domestic buildings within Building Regulations and other energy labelling schemes. The review has identified a range of methods which are capable of predicting overall energy use while accounting for daylight. These vary in complexity from empirical methods such as ESICHECK and the CIBSE Energy Code through to dynamic energy simulation models such as DOE 2 and ESP. For each of the methods identified a brief assessment has been made of their technical capabilities ease of use and availability. These assessments have been based on discussions with users and program developers. Descriptions of the various methods are given. (Author)

A statistical analysis of the energy policy act of 2005, its changes to the daylight saving program, and impact on residential energy consumption

Science.gov (United States)

Murray, Patrick L.

Government programs designed to decrease resource consumption, improve productivity and capitalize on extended daylight hours in the summer have been developed and implemented throughout the world for nearly three hundred years. In 2005, The United States government adopted an extended daylight savings program that increases the number of weeks where the country observes Daylight Saving Time (DST) from 31 to 35 weeks. The program took effect in March 2007. Arguments in support of DST programs highlight the portion of electricity consumption attributed to residential lighting in the evening hours. Adjusting clocks forward by one hour in summer months is believed to reduce electricity consumption due to lighting and therefore significantly reduce residential energy consumption during the period of DST. This paper evaluates the efficacy of the changes to DST resulting from the Energy Policy Act of 2005. The study focuses on changes to household electricity consumption during the extended four weeks of DST. Arizona, one of two states that continue to opt out of DST serves as the study's control for a comparison with neighboring states, Colorado, Nebraska, Nevada, New Mexico, Oklahoma, Texas and Utah. Results from the regression analysis of a Difference in Difference model indicate that contrary to evaluations by Congress and the Department of Energy, the four week period of Extended Daylight Saving Time does not produce a significant decrease in per capita electricity consumption in Southwestern states.

Low levels of vitamin D poorly responsive to daylight exposure in patients with therapy-resistant schizophrenia.

Science.gov (United States)

Bogers, Jan P.A.M.; Bostoen, Tijmen; Broekman, Theo G.

2016-01-01

Low vitamin D levels are associated with schizophrenia, but the possible association between vitamin D levels and illness severity or duration of exposure to daylight has barely been investigated. To compare vitamin D levels in therapy-refractory severely ill schizophrenia patients and members of staff. To investigate the influence of daylight exposure on vitamin D levels in patients. Vitamin D was measured in patients with therapy-resistant schizophrenia in April, after the winter, and in patients and staff members in June, after an exceptionally sunny spring. Vitamin D levels in April and June were compared in patients, and levels in June were compared in patients and staff. The influence of daylight was taken into account by comparing the time patients spent outdoors during the day with the recommended minimum time for adequate vitamin D synthesis, and by comparing time spent outdoors in patients and staff. Patients had high rates of vitamin D deficiency (79-90%) and lower levels of vitamin D than staff members (p vitamin D levels did not normalize, despite the considerably longer than recommended exposure of the skin to daylight (p vitamin D deficiency of therapy-resistant schizophrenia patients is pronounced and cannot be explained by differences in skin pigmentation or by an inactive, indoor lifestyle on the ward. Even theoretically sufficient exposure of the patients to daylight did not ameliorate the low vitamin D levels. While vitamin D deficiency probably plays a role in somatic health problems, it may also play a role in schizophrenia. Interestingly, exposure to daylight during an unusually sunny spring was not sufficient to correct the vitamin D deficiency seen in the patients. This emphasizes the need to measure and correct vitamin D levels in these patients.

Combined daylight and intelligent LED lighting - getting the daylight into the buildings; Kombineret dagslys og intelligent LED belysning - fae dagslys ind i bygningerne. Slutrapport

Energy Technology Data Exchange (ETDEWEB)

Dam-Hansen, C.; Corell, D.D.; Thorseth, A.; Behrensdorff Poulsen, P. [Technical Univ. of Denmark, DTU Fotonik, DTU Risoe Campus, Roskilde (Denmark); Markvart, J.; Iversen, A.; Logadottir, A. [Aalborg Univ., Statens Byggeforskningsinstitut (SBi), Koebenhavn (Denmark)

2013-03-15

The main result of the project is the construction of the new intelligent and dynamic LED lighting system for demonstration and research purposes, and a number of extensive user testing is completed. The LED lighting system is a total system for office lighting with ceiling fixtures and desk lamps, which has made it possible to create a general and workplace lighting in two offices each with two work places. The system is installed in a day light laboratory for such two office spaces. All lamps can be controlled via a developed computer interface, and the desk lamps are further manually controllable by a user via two buttons for color temperature and brightness, respectively. The new intelligent and dynamic lighting system is based on color mixing LED technology and makes it possible to control the color composition, color coordinates and thus the color temperature of the light. Control-wise, the system is pre-programmed to produce white light with a correlated color temperature from 2700 K to 7000 K. The color composition is optimized from the desire for a very good color given at a general CRI value of 92-97 over the area. The system can be dimmed 20-100 %, with no significant change in the light's color properties. A mini-spectrometer is calibrated and built-in in the system and provides the current estimate of daylight brightness and color temperature through measurement of daylight color scheme in the visible range. The system uses daylight properties to control the light from the LED lighting system. The results of user tests show, that the developed possibility to automatically control of light in the office depending on the daylight color temperature is considered to be equally preferred and results in equally satisfied users as a traditional lighting system with even lighting in the room. On the other hand, user results showed that there were both energy savings and more satisfied users to be gained by providing users the opportunity to self-adjust either

The effect of daylight saving time options on electricity consumption of Turkey

Energy Technology Data Exchange (ETDEWEB)

Karasu, Servet [Rize University, Rize Vocational School, 53100, Rize (Turkey)

2010-09-15

Most of the developed countries in the world use Daylight Saving Time (DST) as an energy conservation method. This study focuses on the effects of DST on electrical lighting in the buildings in Turkey. Turkey might adjust its daylight saving time to decrease energy consumption. For this purpose, five scenarios are considered and compared to status quo. The scenario with a 30-minute forward shift to single DST from April to October, stands out as the best solution to conserve electricity across the entire country. The results of the study show that maximum saving is obtained in this scenario by at least 0.7% on the consumption of lighting electricity. (author)

Solar Shading System Based on Daylight Directing Glass Lamellas

DEFF Research Database (Denmark)

Laustsen, Jacob Birck; Santos, Inês; Svendsen, Svend

2008-01-01

The overheating problems in office buildings must be solved with efficient solar shadings in order to reduce the energy demand for cooling and ventilation. At the same time the solar shading should not reduce the daylight level in the building on overcast days because it would result in a lower...

Design and performance of a novel innovative roofing system for tropical landed houses

International Nuclear Information System (INIS)

Al-Obaidi, Karam M.; Ismail, Mazran; Abdul Rahman, Abdul Malek

2014-01-01

Highlights: • Constructing a new design of sustainable roofing systems. • An innovative roofing system (IRS) for tropical landed houses is proposed. • Separate solar heat from useful natural light by physical form. • The IRS can maintain an illuminance level of approximately 86–100% below 2000 lux. • The IRS can reduce the attic air temperature by 5.4 °C and the indoor air temperature by 2.1 °C. - Abstract: An innovative roofing system (IRS) is designed to deliver an abundant and uniform amount of cool natural light from the roof with reduced heat gain effect for tropical residential buildings (3 m height) in Malaysia. Studies revealed that several passive and active solar techniques can be integrated to form a roofing system to separate solar heat from useful natural light at the attic zone before heat reaches the occupied space. The IRS design is specified and proposed by using glazing technology (polycarbonate), pigment technique (reflective and radiative), as well as ventilation process (hybrid turbine ventilator) applied at the attic zone to represent a new model of sustainable roofing design. The aim of this research is to demonstrate the effectiveness of the design concept without the need for any chemical, complex, or expensive solar design techniques. The methodology was conducted on a series of field studies in a standard room model at Universiti Sains Malaysia. Three different roofing systems are investigated to identify the IRS performance in both dark and daylight conditions to determine the effect of natural light on the indoor environment. The outcomes of the design show that the IRS was able to reduce the indoor air temperature compared with conventional roofing system by approximately 2.1 °C under daylight condition. Results showed that the difference in the IRS (daylight–dark) condition was 0.31 °C compared to that in the conventional roofing system at 0.8 °C. Furthermore, the level of mean radiant temperature compared with

Using the Life Satisfaction Approach to Value Daylight Savings Time Transitions: Evidence from Britain and Germany

OpenAIRE

Daniel Kuehnle; Christoph Wunder

2015-01-01

Daylight savings time (DST) represents a public good with costs and benefits. We provide the first comprehensive examination of the welfare effects of the spring and autumn transitions for the UK and Germany. Using individual-level data and a regression discontinuity design, we estimate the effect of the transitions on life satisfaction. Our results show that individuals in both the UK and Germany experience deteriorations in life satisfaction in the first week after the spring transition. We...

Switching From Conventional Photodynamic Therapy to Daylight Photodynamic Therapy For Actinic Keratoses: Systematic Review and Meta-analysis.

Science.gov (United States)

Tomás-Velázquez, A; Redondo, P

2017-05-01

Actinic keratosis is a precursor lesion to the most common nonmelanoma skin cancer. Conventional photodynamic therapy (PDT) has been shown to be effective, but the procedure is time-consuming, can be very painful, and requires infrastructure. These shortcomings led to the emergence of daylight PDT. To obtain a global estimate of efficacy, we undertook a systematic literature review and performed a meta-analysis of the available evidence on the efficacy and safety of daylight PDT as compared to conventional PDT in the treatment of actinic keratosis and/or field cancerization. The conclusion is that the difference in efficacy is clinically negligible (global estimate of the mean response rate difference, -3.69%; 95% CI, -6.54% to -0.84%). The adverse effects of daylight PDT are mild and localized (79% of patients report no discomfort), and patients report less pain (P<.001). Daylight PDT gives good to excellent cosmetic results in more than 90% of patients, and patient satisfaction is greater (P<.001). Copyright © 2016 AEDV. Publicado por Elsevier España, S.L.U. All rights reserved.

Effect of window glazing on colour quality of transmitted daylight

NARCIS (Netherlands)

Dangol, R.; Kruisselbrink, T.W.; Rosemann, A.L.P.

2017-01-01

In this study, the colour quality of the daylight transmitted through different window glazing types is evaluated. The analysis considered four different types of window glazing: laminated, monolithic, coated and applied film glazing ranging in luminous transmittance from around 0.97 to <0.1. The

Effect of daylight and gamma-radiation on the colour of fabricated textile polymers

International Nuclear Information System (INIS)

Wahab, L.A.; Saad, M.M.; Talaat, M.H.

2003-01-01

The effects of gamma-irradiation (0-60 mrad) and natural daylight (0-6 months) on the color and other properties of undyed textile polymers (cotton, nylon-6, polyester/cotton blend and wool/polyester blend) were investigated using optical spectroscopy. The change in color was estimated by yellowness index (Y1) and color difference (Delta E) between the irradiated and unirradiated samples. The analysis used for dosimeter is mainly spectrophotometer in the UV and visible spectrum. Systems having a reproducible response are selected. In the case of cotton fabric the change in color and reflection are showing a promise for dosimeter of gamma-radiation. It was concluded that the whiteness (W) of synthetic and blend fabrics decreased much more than that of cotton fabrics

Estimation Methodology for the Electricity Consumption with the Daylight- and Occupancy-Controlled Artificial Lighting

DEFF Research Database (Denmark)

Larsen, Olena Kalyanova; Jensen, Rasmus Lund; Strømberg, Ida Kristine

2017-01-01

Artificial lighting represents 15-30% of the total electricity consumption in buildings in Scandinavia. It is possible to avoid a large share of electricity use for lighting by application of daylight control systems for artificial lighting. Existing methodology for estimation of electricity...... consumption with application of such control systems in Norway is based on Norwegian standard NS 3031:2014 and can only provide results from a rough estimate. This paper aims to introduce a new estimation methodology for the electricity usage with the daylight- and occupancy-controlled artificial lighting...

Analysing the impact of reflectance distributions and well geometries on vertical surface daylight levels in atria for overcast skies

Energy Technology Data Exchange (ETDEWEB)

Du, Jiangtao; Sharples, Steve [School of Architecture, University of Sheffield, Crookesmoor Building, Conduit Road, Sheffield S10 1FL (United Kingdom)

2010-07-15

This study investigated the impacts of different diffuse reflectance distributions and well geometries on vertical daylight factors and vertical internally reflected components in atria. Two forms of reflectance distribution patterns of wall surface were examined: horizontal and vertical reflectance band variation. The square atrium models studied have a broader WI range of 0.25-2.0, which represent shallow, medium and high atria. Radiance, a powerful package based on backward ray tracing technique, was used for the simulations of vertical daylight levels. The results show that different reflectance distributions of square atrium walls do have an impact on the vertical daylight factors and vertical internally reflected components under overcast sky condition. The impact relates to the orientation of the band with different reflectance distributions on the wall. Compared with the vertical band surface, the horizontal band surface has a much more complicated effect. The horizontal distributions of the reflectances significantly affects the vertical daylight levels at the locations more than 30% atrium height on the wall. For an atrium with a height more than 1/2 the width, the effect tends to increase with the increasing well index. The vertical distributions of the reflectance, nevertheless, do not substantially take effect on the vertical daylight levels in atria except for some special reflectance distribution patterns. (author)

Daylighting and Cooling of Atrium Buildings in Warm Climates: Impact of the Top-Fenestration and Wall Mass Area.

Science.gov (United States)

Atif, Morad Rachid

1992-01-01

Sun-lighting and daylighting contribute greatly to the aesthetic value of an atrium. However, today's atria are often found either over-lit with extensive cooling loads, or under-lit requiring increased artificial lighting loads. The increase of the top-glazing area increases the cooling loads and decreases the lighting loads. The increase of the mass in the atrium walls decreases the maximum atrium temperature and the cooling loads. Furthermore, the mass distribution and its reflectance affect the lighting levels at the atrium floor. The purpose of this study is to investigate the simultaneous impact of the top-fenestration and the mass and reflectance of atrium walls on the cooling and daylighting performance of atria in warm climates. It attempts to determine the optimum top-fenestration for efficient daylighting and low cooling loads. The daylighting performance was evaluated through illumination measurements in physical models in a sky simulator. The cooling performance was evaluated using the software TRNSYS 13.1. Two types of top-fenestration were tested: horizontal and vertical south-facing, each with three alternate areas. The variations of the atrium walls included materials (standard frame and heavyweight concrete) and percentage and reflectance of the solid area. Two and four-story atria were considered, each with square and linear configuration. The performance was evaluated for three warm climates. The optimum top-fenestration for efficient daylighting was determined. The daylighting prediction algorithm was extended to include the effective reflectance of the atrium walls. The increase of mass in the atrium walls significantly decreased the atrium temperature range, the maximum atrium temperature, and the cooling loads. This impact decreased from horizontal to vertical south-facing top-glazing. The vertical south-facing top-glazing and, to a lesser degree, the reduction of the glazed atrium cover by 50% had more cooling benefits than increasing the

Quantifying the potential of automated dynamic solar shading in office buildings through integrated simulations of energy and daylight

DEFF Research Database (Denmark)

Nielsen, Martin Vraa; Svendsen, Svend; Bjerregaard Jensen, Lotte

2011-01-01

The façade design is and should be considered a central issue in the design of energy-efficient buildings. That is why dynamic façade components are increasingly used to adapt to both internal and external impacts, and to cope with a reduction in energy consumption and an increase in occupant...... them with various window heights and orientations. Their performance was evaluated on the basis of the building’s total energy demand, its energy demand for heating, cooling and lighting, and also its daylight factors. Simulation results comparing the three façade alternatives show potential...

Does Daylight Saving Save Energy? A Meta-Analysis

OpenAIRE

Havránek, Tomáš; Herman, Dominik; Irsova, Zuzana

2016-01-01

The original rationale for adopting daylight saving time (DST) was energy savings. Modern research studies, however, question the magnitude and even direction of the effect of DST on energy consumption. Representing the first meta-analysis in this literature, we collect 162 estimates from 44 studies and find that the mean reported estimate indicates modest energy savings: 0.34% during the days when DST applies. The literature is not affected by publication bias, but the results vary systemati...

Transition into daylight saving time influences the fragmentation of the rest-activity cycle

Directory of Open Access Journals (Sweden)

Tuulio-Henriksson Annamari

2006-01-01

Full Text Available Abstract Background Daylight saving time is widely adopted. Little is known about its influence on the daily rest-activity cycles. We decided to explore the effects of transition into daylight saving time on the circadian rhythm of activity. Methods We monitored the rest-activity cycles with the use of wrist-worn accelerometer on a sample of ten healthy adults for ten days around the transition into summer time. Identical protocols were carried out on the same individuals in two consecutive years, yielding data on 200 person-days for analysis in this study. Results There was no significant effect on the rest-activity cycle in the sample as a whole. Fragmentation of the rest-activity cycle was enhanced in a subgroup of persons having sleep for eight hours or less (P = 0.04 but reduced in those who preferred to sleep for more than eight hours per night (P = 0.05. The average level of motor activity was increased in persons having the morning preference for daily activity patterns (P = 0.01. Conclusion Transition into daylight saving time may have a disruptive effect on the rest-activity cycle in those healthy adults who are short-sleepers or more of the evening type.

75 FR 36089 - Payment System Risk Policy; Daylight Overdraft Posting Rules

Science.gov (United States)

2010-06-24

... FEDERAL RESERVE SYSTEM [OP-1385] Payment System Risk Policy; Daylight Overdraft Posting Rules... Payment System Risk Policy, the Board is announcing posting rules for a new same-day automated clearing... Kirkpatrick, Senior Financial Services Analyst, Payment System Risk (202-452-2796), or Jennifer Davidson...

78 FR 70046 - Payment System Risk Policy; Daylight Overdraft Posting Rules

Science.gov (United States)

2013-11-22

... FEDERAL RESERVE SYSTEM [Docket No. OP--1471] Payment System Risk Policy; Daylight Overdraft... Reserve Policy on Payment System Risk (PSR policy) to eliminate certain posting rules to conform with... Services Analyst (202- 452-2404), Division of Reserve Bank Operations and Payment Systems. For users of...

Development of Optical Fiber-Based Daylighting System and Its Comparison

Directory of Open Access Journals (Sweden)

Irfan Ullah

2015-07-01

Full Text Available Fiber-optic daylighting systems have been shown to be a promising and effective way to transmit sunlight in the interior space whilst reducing electric lighting energy consumption. To increase efficiency in terms of providing uniform illumination in the interior, the current need is to illuminate optical fiber-bundle with uniform light flux. To this end, we propose a method for achieving collimated light, which illuminates the fiber-bundle uniformly. Light is collected through a parabolic concentrator and focused toward a collimating lens, which distributes the light over each optical fiber. An optics diffusing structure is utilized at the end side of the fiber bundle to spread light in the interior. The results clearly reveal that the efficiency in terms of uniform illumination, which also reduces the heat problem for optical fibers, is improved. Furthermore, a comparison study is conducted between current and previous approaches. As a result, the proposed daylighting system turns out convenient in terms of energy saving and reduction in greenhouse gas emissions.

Effect of Window Glazing on Colour Quality of Transmitted Daylight

Directory of Open Access Journals (Sweden)

Rajendra Dangol

2017-12-01

Full Text Available In this study, the colour quality of the daylight transmitted through different window glazing types is evaluated. The analysis considered four different types of window glazing: laminated, monolithic, coated and applied film glazing ranging in luminous transmittance from around 0.97 to <0.1. The spectral transmittance data of different window glazing types are taken from the International Glazing Data Base (IGDB, which is maintained by Lawrence Berkeley National Laboratories (LBNL. The study showed that the CIE CRI does not always seem to be the suitable method to predict the colour quality of daylight in building for particular situations. However, in the context of this study, the prediction of colour rendering properties of window glazing by other metrics such as Colour Quality Scale (version 9, Memory CRI, Ra,D65 (adjusted CRI metric with D65 as the reference illuminant performed better. For most of the daylit situations inside the building, the chromaticity difference criterion was not met. Judging the colour quality of such situations requires different method.

Development of new types of sun shielding systems based on daylight conducting sun shielding glass slats; Udvikling af nye typer solafskaermningssystemer baseret paa dagslysdirigerende solafskaermende glaslameller

Energy Technology Data Exchange (ETDEWEB)

Iversen, A.; Svendsen, Svend (Danmarks Tekniske Univ., DTU Byg, Kgs. Lyngby (Denmark)); Laustsen, J.B. (NIRAS A/S (Denmark)); Traberg-Borup, S.; Johnsen, Kjeld (Statens Byggeforskningsinstitut, Aalborg Univ. (Denmark))

2009-11-15

The project has developed a new solar shading system consisting of reflective reflective glass slats, which both must act as general sun shading and also be able to improve daylight conditions inside the building when it's needed, by reflecting light further into the room. Simulations with the program IESve / Radiance are performed of daylight conditions in an office room using the developed solar shading concept. The calculation model is used to optimize the glass slat system's shape and dimensions (slat angle, width and distance). The calculations have shown that a slat angle of 30 degrees gives the best daylight conducting effect in overcast weather. At this position, compared with the same facade without sun shading, a slight reduction of daylight factor close to the windows is obtained while the back of the room is largely unchanged. Compared with traditional slat systems the reflective glass slats provide higher daylight factors in the building. Daylight measurements are performed in a daylight laboratory. Measurements show that the daylight factor in cloudy weather is reduced by approx. 20% 1.2 m from the facade where there are usually plenty of light while it is unchanged or slightly higher at the back of the room where there often are problems with too little daylight. On a clear day with direct sunlight and the reflective slats in shading position the result is a reduction of illumination through the whole room. The developed sun shading system reduces sun irradiance in reflective position without diminishing daylight conditions in the building under overcast conditions when the slats are angled in daylight conducting position. The glass slat system's effect on the thermal indoor environment and energy consumption are analyzed using calculations in the program BSim and by measurements of the sun shading system mounted in the Passys test cell at the Technical University of Denmark. (ln)

Problems of natural lighting for deepened buildings and underground premises under screen effect of high-rise construction

Directory of Open Access Journals (Sweden)

Larionova Kira

2018-01-01

Full Text Available The main rationale and objective of the submitted research work is to create a quality lighting environment in the premises of deepened buildings and below-ground structures under screen effect of high-rise construction (high-rise buildings. It is noted, that in modern megapolises, a deficiency of vacant urban territories leads to the increased density of urban development with increased amount of high-rise construction and tendency to increase efficiency in the use of underground space. The natural lighting of premises in underground buildings and structures is the most efficient way, but it can be implemented only under use of roof lighting system in the form of roof monitors or skylights. In this case the levels of indoor natural lighting will be affected with serious screening effect of high-rise buildings in surrounding development. Such an situation is not regulated, or even considered by the contemporary building Codes and Regulations on natural lighting of interiors. The authors offered a new formula for a daylight factor calculation with roof lighting system in the described cases. The results of theoretical calculations and experimental studies showed very similar values. This proved the truth of the offered formula and elaborated method of calculation on the basis of an offered hypothesis. It prooves, that it is possible to use some factor and guide points in the daylight factors design under system of side natural lighting in the same design for a system of roof lighting.

Problems of natural lighting for deepened buildings and underground premises under screen effect of high-rise construction

Science.gov (United States)

Larionova, Kira; Stetsky, Sergey

2018-03-01

The main rationale and objective of the submitted research work is to create a quality lighting environment in the premises of deepened buildings and below-ground structures under screen effect of high-rise construction (high-rise buildings). It is noted, that in modern megapolises, a deficiency of vacant urban territories leads to the increased density of urban development with increased amount of high-rise construction and tendency to increase efficiency in the use of underground space. The natural lighting of premises in underground buildings and structures is the most efficient way, but it can be implemented only under use of roof lighting system in the form of roof monitors or skylights. In this case the levels of indoor natural lighting will be affected with serious screening effect of high-rise buildings in surrounding development. Such an situation is not regulated, or even considered by the contemporary building Codes and Regulations on natural lighting of interiors. The authors offered a new formula for a daylight factor calculation with roof lighting system in the described cases. The results of theoretical calculations and experimental studies showed very similar values. This proved the truth of the offered formula and elaborated method of calculation on the basis of an offered hypothesis. It prooves, that it is possible to use some factor and guide points in the daylight factors design under system of side natural lighting in the same design for a system of roof lighting.

The shift to and from daylight savings time and motor vehicle crashes.

Science.gov (United States)

Lambe, M; Cummings, P

2000-07-01

The objective of the study was to examine whether the shifts to and from daylight savings time in Sweden have short-term effects on the incidence of traffic crashes. A database maintained by the Swedish National Road Administration was used to examine crashes from 1984 through 1995, that occurred on state roads the Monday preceding, the Monday immediately after (index Monday), and the Monday 1 week after the change to daylight savings time in the spring and for the corresponding three Mondays in the autumn. The Mondays 1 week before and after the time changes were taken as representing the expected incidence of crashes. Crash incidence was calculated per 1000 person-years using population estimates for each year of the study. The association between 1 h of possible sleep loss and crash incidence was estimated by the incidence rate ratio from negative binomial regression. The incidence rate ratio was 1.04 (95% CI, 0.92-1.16) for a Monday on which drivers were expected to have had 1 h less sleep, compared with other Mondays. In the spring, the incidence rate ratio for crashes was 1.11 (95% CI, 0.93-1.31) for Mondays after the time change compared to other spring Mondays. The corresponding rate ratio for the fall was 0.98 (95% CI, 0.84-1.15) It was concluded that the shift to and from daylight savings time did not have measurable important immediate effects on crash incidence in Sweden.

Workshop - Solar cells and daylight. Solar cell house. House building with integrated solar cell systems; Workshop - Solceller og dagslys. Solcellehus. Boligbyggeri med integrerede solcelleanlaeg

Energy Technology Data Exchange (ETDEWEB)

Schroeder, Mio; Hansen, Ellen Kathrine

2005-04-15

The workshop 'Solar cells and daylight' at Aarhus School of Architecture aimed at studying and developing architectural potentials of integrating solar cell systems in building components for future house building. The aim of the process was to stress that technical conditions such as energy technological component design might work as central points of support in the future shaping and organisation of qualitative and functional design of houses. (BA)

Daylighting for energy conservation in an existing building under tropical climate conditions: a case study of Lai Sue Thai building Ramkhamhaeng University

Directory of Open Access Journals (Sweden)

Lerdlekha Tanachaikhan

2015-12-01

Full Text Available Daylighting using skylight has been shown to have a high potential in reducing electrical lighting energy, and could provide a more pleasant atmosphere of a daylit space. However, in hot climates, the main constraint of daylighting is the solar heat gain that contributes to major heat load for an air-conditioning system. If the balance between the beneficial light gain used to offset lighting energy requirement and heat gain from daylight is well considered, significant energy savings can be obtained. The main objective of the study is to evaluate the potential of daylighting for energy conservation in the tropics through theoretical analysis (simulation study and experimental observation. Lai Sue Thai Building (an existing and educational building located at Ramkhamkaeng University was selected as a case study. From analysis, use of daylight could reduce electrical energy in this building by up to 76% compared to the initial condition where fully lighting was supplied. Window orientation would also play an important role. Moreover, heat gain through windows due to daylighting can be controlled by overhangs and the appropriate Window-to-Wall ratio that would be about 30% for this building. An experimental study was also carried out to validate the results in a selected room. About 49% and 37% of Relative Root Mean Square Error (RRMSE were observed in light and heat measurements, respectively

Chromatic illumination discrimination ability reveals that human colour constancy is optimised for blue daylight illuminations.

Directory of Open Access Journals (Sweden)

Bradley Pearce

Full Text Available The phenomenon of colour constancy in human visual perception keeps surface colours constant, despite changes in their reflected light due to changing illumination. Although colour constancy has evolved under a constrained subset of illuminations, it is unknown whether its underlying mechanisms, thought to involve multiple components from retina to cortex, are optimised for particular environmental variations. Here we demonstrate a new method for investigating colour constancy using illumination matching in real scenes which, unlike previous methods using surface matching and simulated scenes, allows testing of multiple, real illuminations. We use real scenes consisting of solid familiar or unfamiliar objects against uniform or variegated backgrounds and compare discrimination performance for typical illuminations from the daylight chromaticity locus (approximately blue-yellow and atypical spectra from an orthogonal locus (approximately red-green, at correlated colour temperature 6700 K, all produced in real time by a 10-channel LED illuminator. We find that discrimination of illumination changes is poorer along the daylight locus than the atypical locus, and is poorest particularly for bluer illumination changes, demonstrating conversely that surface colour constancy is best for blue daylight illuminations. Illumination discrimination is also enhanced, and therefore colour constancy diminished, for uniform backgrounds, irrespective of the object type. These results are not explained by statistical properties of the scene signal changes at the retinal level. We conclude that high-level mechanisms of colour constancy are biased for the blue daylight illuminations and variegated backgrounds to which the human visual system has typically been exposed.

Design, science and naturalism

Science.gov (United States)

Deming, David

2008-09-01

The Design Argument is the proposition that the presence of order in the universe is evidence for the existence of God. The Argument dates at least to the presocratic Greek philosophers, and is largely based on analogical reasoning. Following the appearance of Aquinas' Summa Theologica in the 13th century, the Christian Church in Europe embraced a Natural Theology based on observation and reason that allowed it to dominate the entire world of knowledge. Science in turn advanced itself by demonstrating that it could be of service to theology, the recognized queen of the sciences. During the heyday of British Natural Theology in the 17th and 18th centuries, the watchmaker, shipbuilder, and architect analogies were invoked reflexively by philosophers, theologians, and scientists. The Design Argument was not systematically and analytically criticized until David Hume wrote Dialogues on Natural Religion in the 1750s. After Darwin published Origin of Species in 1859, Design withered on the vine. But in recent years, the Argument has been resurrected under the appellation "intelligent design," and been the subject of political and legal controversy in the United States. Design advocates have argued that intelligent design can be formulated as a scientific hypothesis, that new scientific discoveries validate a design inference, and that naturalism must be removed as a methodological requirement in science. If science is defined by a model of concentric epistemological zonation, design cannot be construed as a scientific hypothesis because it is inconsistent with the core aspects of scientific methodology: naturalism, uniformity, induction, and efficient causation. An analytical examination of claims by design advocates finds no evidence of any type to support either scientific or philosophical claims that design can be unambiguously inferred from nature. The apparent irreducible complexity of biological mechanisms may be explained by exaptation or scaffolding. The argument

77 FR 22666 - Payment System Risk Policy; Daylight Overdraft Posting Rules

Science.gov (United States)

2012-04-17

... FEDERAL RESERVE SYSTEM 12 CFR Part 204 [Docket No. OP-1440] Payment System Risk Policy; Daylight.... SUMMARY: The Board of Governors of the Federal Reserve System (Board) has revised its Policy on Payment...), Division of Reserve Bank Operations and Payment Systems. For users of Telecommunications Device for the...

Energy Savings by Using Daylight for Basic Urban Shapes : With a Case Study of Three Different Street Types

OpenAIRE

Sundborg, Bengt

2016-01-01

During winter the sun is in short supply. But research at KTH shows that solar radiation can be facilitated while energy consumption for lighting is reduced. This provided that the buildings are appropriately designed. But, unfortunately, the sunlight is often not taken into account and the results are the opposite. The energy savings depend on good town planning where the daylight is accessible for longer periods of time during the day, both indoors and outdoors. Then, the periods of use for...

Application of automated blind for daylighting in tropical region

International Nuclear Information System (INIS)

Chaiwiwatworakul, Pipat; Chirarattananon, Surapong; Rakkwamsuk, Pattana

2009-01-01

This paper reports an experimental and simulation study on application of automated Venetian blind for daylighting in tropical climate. A horizontal blind system operating automatically under programmed control was constructed and integrated onto the glazed windows to form a window system with an automated blind in a room of a laboratory building. A dimming controller was also integrated to the lighting system of the room. Different operation schemes of the window system were devised and tested in the attempt to maximize energy savings while maintaining the quality of the visual environment in the room. Intensive measurement of illuminance of the interior space was undertaken during the experiments. A methodology for calculation of interior daylight illuminance and associated glare corresponding to the configurations of the experiments was adopted. The method was coded into a computer program. Results of calculation from the program agree well with those from experiments for all the schemes of operation conducted. The program was used to simulate the situation when each scheme of operation was implemented for a whole year. It was found that such window system with automated blind enabled energy savings of 80%, but a more sophisticated scheme also helped maintain the interior visual quality at high level.

Simulation of Daylighting Conditions in a Virtual Underground City

Directory of Open Access Journals (Sweden)

Cristiano Merli Alcini

2015-06-01

Full Text Available From the Piranesi fantastic architectures to the animation movies and video games of the last thirty years, a new design approach has been introduced and developed: the design of the virtual space. Designing the "virtual" means experiencing a multidisciplinary approach where architecture, engineering, and urban planning meet the new horizons of information and communication technology. This study is focused on virtual space, which is an underground city. Mankind have always made and used underground environments: the possibilities of unlimited spaces to potential development, the reduced needs for raw materials for the construction and the protection from outdoor weather are some of the reasons that prompted humans to the realization of underground spaces in the past. These reasons and the availability of innovative technologies could encourage a breakthrough in the realization of new underground environments. A recent example is represented by the Underground City of Montreal (RÉSO. We present the architectural design of a virtual underground city, which is called Arch[ane], and its evaluation. The underground city is modular and the studied module is composed of eight floors with a total depth of 400 m and dimensions of 800 m × 800 m. The study comprises the evaluation of the effect of sunlight on each eight floors of the city. Daylighting simulations were performed considering different cities at different latitudes, days, and hours. The results have shown that the particular design of the underground city with skylights gives significant values of illuminance at a certain depth. Furthermore, the simulation results show how huge can be the potentialities of software to simulate extremely big environments.

Simple tool to evaluate the impact of daylight on building energy consumption

DEFF Research Database (Denmark)

Hviid, Christian Anker; Nielsen, Toke Rammer; Svendsen, Svend

2008-01-01

This paper presents a simple building simulation tool for integrated daylight and thermal analysis. The tool is capable of importing the thermal and visual properties for different glazings and shading positions from the Window Information System (WIS) program. Radiosity methodology is used...

Effect of daylight saving time on lighting energy use: a literature review

NARCIS (Netherlands)

Aries, M.B.C.; Newsham, G.R.

2008-01-01

The principal reason for introducing (and extending) daylight saving time (DST) was, and still is, projected energy savings, particularly for electric lighting. This paper presents a literature review concerning the effects of DST on energy use. Simple estimates suggest a reduction in national

Experiences collected with a daylight system

International Nuclear Information System (INIS)

Krueger, P.

1981-01-01

The Kodak Daylight System is space-saving. It consists of the Kodak-X-Omat cassette, the identification camera and the loading and reloading device (cassette multiloader). All three units of this system are notable for extremely safe operation. Handling is simple and easily appreciated. All brands of film can be used. The data window in the cassette is too large; in some cases, important sections of the image can be covered up by the window. Automatic loading and reloading considerably reduces solling of the cassette, which is otherwise common, and also reduces abrasion of the intensifying screen. Introduction of this system has had a beneficial effect on overall working and has been welcomed by all concerned as a contribution towards facilitating routine work. (orig.) [de

Effects of daylight-saving time changes on stock market volatility: a comment.

Science.gov (United States)

Kamstra, Mark J; Kramer, Lisa A; Levi, Maurice D

2010-12-01

In a recent article in this journal, Berument, Dogan, and Onar (2010) challenged the existence of the previously documented daylight-saving effect. Kamstra, Kramer, and Levi's original finding (2000) was that average stock market returns on Mondays following time changes are economically and statistically significantly lower than typical Monday returns. Kamstra, et al. hypothesized that the effect may arise due to heightened anxiety or risk aversion on the part of market participants after they experience a 1-hr. disruption in their sleep habits, in accordance with prior findings in the psychology literature linking sleep desynchronosis with anxiety. Berument, et al. replicated the original findings using ordinary least squares estimation, but when they modeled the mean of returns using a method prone to producing biased estimates, they obtained puzzling results. The analysis here, based on standard, unbiased modeling techniques, shows that the daylight-saving effect remains intact in the U.S.

Spanish-Portuguese consensus statement on use of daylight-mediated photodynamic therapy with methyl aminolevulinate in the treatment of actinic keratosis.

Science.gov (United States)

Gilaberte, Y; Aguilar, M; Almagro, M; Correia, O; Guillén, C; Harto, A; Pérez-García, B; Pérez-Pérez, L; Redondo, P; Sánchez-Carpintero, I; Serra-Guillén, C; Valladares, L M

2015-10-01

Daylight-mediated photodynamic therapy (PDT) is a new type of PDT that is as effective as conventional PDT in grade 1 and 2 actinic keratosis but with fewer adverse effects, resulting in greater efficiency. The climatic conditions in the Iberian Peninsula require an appropriately adapted consensus protocol. We describe a protocol for the treatment of grade 1 and 2 actinic keratosis with daylight-mediated PDT and methyl aminolevulinate (MAL) adapted to the epidemiological and clinical characteristics of Spanish and Portuguese patients and the climatic conditions of both countries. Twelve dermatologists from different parts of Spain and Portugal with experience in the treatment of actinic keratosis with PDT convened to draft a consensus statement for daylight-mediated PDT with MAL in these countries. Based on a literature review and their own clinical experience, the group developed a recommended protocol. According to the recommendations adopted, patients with multiple grade 1 and 2 lesions, particularly those at risk of developing cancer, are candidates for this type of therapy. Daylight-mediated PDT can be administered throughout the year, although it is not indicated at temperatures below 10°C or at excessively high temperatures. Likewise, therapy should not be administered when it is raining, snowing, or foggy. The procedure is simple, requiring application of a sunscreen with a protection factor of at least 30 based exclusively on organic filters, appropriate preparation of the lesions, application of MAL without occlusion, and activation in daylight for 2hours. This consensus statement represents a practical and detailed guideline to achieve maximum effectiveness of daylight-mediated PDT with MAL in Spain and Portugal with minimal adverse effects. Copyright © 2015 Elsevier España, S.L.U. and AEDV. All rights reserved.

New design-tools for energy efficient commercial buildings. Neue Planungsinstrumente fuer energiegerechte Verwaltungsgebaeude

Energy Technology Data Exchange (ETDEWEB)

Erhorn, H [Fraunhofer-Inst. fuer Bauphysik, Stuttgart (Germany); Szerman, M [Fraunhofer-Inst. fuer Bauphysik, Stuttgart (Germany)

1993-03-01

Aim of SHC-Task 12 is to develop and hand out design tools to designers, architects and engineers for the integrated evaluation of daylighting and heating/cooling concepts on an early stage of the actual design process. Concerning the software for the lighting and daylighting evaluation, the following international validated programmes are used: SUPERLITE (Radiosity); RADIANCE (Raytracing); SUPERLINK (linkage between daylighting an energy analysis). The thermal and energetic behaviour of buildings can be analysed with the simulation tools: - SUNCODE; - TRNSYS; - tsbi. The input of the programmes is handled by a common CAD programme and special converters. The software package is produced in international collaboration and will be distributed in 1993. (orig./BWI)

Impact of solar shading on daylight quality. Measurements in experimental office rooms

Energy Technology Data Exchange (ETDEWEB)

Dubois, M.C.

2001-07-01

The impact of ten solar shading screens and one venetian blind on daylight quality was studied through measurements in two south-oriented experimental office rooms. The daylight quality was assessed by considering five performance indicators: the daylight factor, the work plane illuminance, the illuminance uniformity on the work plane, the absolute luminance in the field of view and the luminance ratios between the paper task, the walls and the VDT screen. The measurements were carried out under perfect sunny conditions and overcast conditions. The results show that the shading devices can be divided into three distinct groups. Group 1 consists of all dark-coloured screens; Group 2 includes the closed venetian blind while Group 3 includes the white screens and the horizontal venetian blind. The devices of Group 1 produced unacceptably low work plane illuminance and vertical luminance values which resulted in unsuitable luminance ratios between the task, the walls and VDT screen. However, these devices reduced the luminance of the window (sky) to acceptable levels. The devices of Group 3 did not prevent high window luminance but yielded higher levels of work plane illuminance and inner wall luminance, which makes them suitable for traditional paper tasks. They also generated high wall luminance values which resulted in a number of unacceptable luminance ratios between the task, walls and VDT screen. The closed venetian blind (Group 2) was the only device which scored well on all performance indicators considered. It provided ideal illuminance levels for paper and VDT tasks and resulted in favourable wall luminance values for computer work.

Effects of daylight-saving time changes on stock market returns and stock market volatility: rebuttal.

Science.gov (United States)

Kamstra, Mark J; Kramer, Lisa A; Levi, Maurice D

2013-02-01

In a 2011 reply to our 2010 comment in this journal, Berument and Dogen maintained their challenge to the existence of the negative daylight-saving effect in stock returns reported by Kamstra, Kramer, and Levi in 2000. Unfortunately, in their reply, Berument and Dogen ignored all of the points raised in the comment, failing even to cite the Kamstra, et al. comment. Berument and Dogen continued to use inappropriate estimation techniques, over-parameterized models, and low-power tests and perhaps most surprisingly even failed to replicate results they themselves reported in their previous paper, written by Berument, Dogen, and Onar in 2010. The findings reported by Berument and Dogen, as well as by Berument, Dogen, and Onar, are neither well-supported nor well-reasoned. We maintain our original objections to their analysis, highlight new serious empirical and theoretical problems, and emphasize that there remains statistically significant evidence of an economically large negative daylight-saving effect in U.S. stock returns. The issues raised in this rebuttal extend beyond the daylight-saving effect itself, touching on methodological points that arise more generally when deciding how to model financial returns data.

Simple tool to evaluate the impact of daylight on building energy consumption

DEFF Research Database (Denmark)

Hviid, Christian Anker; Nielsen, Toke Rammer; Svendsen, Svend

2008-01-01

This paper presents a simple building simulation tool for integrated daylight and thermal analysis. The tool is capable of importing the thermal and visual properties for different glazings and shading positions from the Window Information System (WIS) program. A coupled ray-tracing and radiosity...

Color tuning in alert macaque V1 assessed with fMRI and single-unit recording shows a bias toward daylight colors.

Science.gov (United States)

Lafer-Sousa, Rosa; Liu, Yang O; Lafer-Sousa, Luis; Wiest, Michael C; Conway, Bevil R

2012-05-01

Colors defined by the two intermediate directions in color space, "orange-cyan" and "lime-magenta," elicit the same spatiotemporal average response from the two cardinal chromatic channels in the lateral geniculate nucleus (LGN). While we found LGN functional magnetic resonance imaging (fMRI) responses to these pairs of colors were statistically indistinguishable, primary visual cortex (V1) fMRI responses were stronger to orange-cyan. Moreover, linear combinations of single-cell responses to cone-isolating stimuli of V1 cone-opponent cells also yielded stronger predicted responses to orange-cyan over lime-magenta, suggesting these neurons underlie the fMRI result. These observations are consistent with the hypothesis that V1 recombines LGN signals into "higher-order" mechanisms tuned to noncardinal color directions. In light of work showing that natural images and daylight samples are biased toward orange-cyan, our findings further suggest that V1 is adapted to daylight. V1, especially double-opponent cells, may function to extract spatial information from color boundaries correlated with scene-structure cues, such as shadows lit by ambient blue sky juxtaposed with surfaces reflecting sunshine. © 2012 Optical Society of America

Light-scattering properties of a Venetian blind slat used for daylighting applications

Energy Technology Data Exchange (ETDEWEB)

Nilsson, Annica M. [Department of Engineering Sciences, Angstroem Laboratory, Uppsala University (Sweden); Jonsson, Jacob C. [Environmental Energy Technology Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States)

2010-12-15

The low cost, simplicity, and aesthetic appearance of external and internal shading devices, make them commonly used for daylighting and glare-control applications. Shading devices, such as Venetian blinds, screens, and roller shades, generally exhibit light scattering and/or light redirecting properties. This requires the bi-directional scattering distribution function (BSDF) of the material to be known in order to accurately predict the daylight distribution and energy flow through the fenestration system. Acquiring the complete BSDF is not a straightforward task, and to complete the process it is often required that a model is used to complement the measured data. In this project, a Venetian blind slat with a white top surface and a brushed aluminum bottom surface was optically characterized. A goniophotometer and an integrating sphere spectrophotometer were used to determine the angle resolved and hemispherical reflectance of the sample, respectively. The acquired data were fitted to a scattering model providing one Lambertian and one angle dependent description of the surface properties. These were used in combination with raytracing to obtain the complete BSDFs of the Venetian blind system. (author)

Effects of accelerated artificial daylight aging on bending strength and bonding of glass fibers in fiber-embedded maxillofacial silicone prostheses.

Science.gov (United States)

Hatamleh, Muhanad M; Watts, David C

2010-07-01

The purpose of this study was to test the effect of different periods of accelerated artificial daylight aging on bond strength of glass fiber bundles embedded into maxillofacial silicone elastomer and on bending strength of the glass fiber bundles. Forty specimens were fabricated by embedding resin-impregnated fiber bundles (1.5-mm diameter, 20-mm long) into maxillofacial silicone elastomer. Specimens were randomly allocated into four groups, and each group was subjected to different periods of accelerated daylight aging as follows (in hours); 0, 200, 400, and 600. The aging cycle included continuous exposure to quartz-filtered visible daylight (irradiance 760 W/m(2)) under an alternating weathering cycle (wet for 18 minutes, dry for 102 minutes). Pull-out tests were performed to evaluate bond strength between fiber bundles and silicone using a universal testing machine at 1 mm/min crosshead speed. Also a three-point bending test was performed to evaluate bending strength of the fiber bundles. One-way ANOVA and Bonferroni post hoc tests were carried out to detect statistical significance (p aging only. After 200 hours of exposure to artificial daylight and moisture conditions, bond strength between glass fibers and heat-cured silicones is optimal, and the bending strength of the glass fiber bundles is enhanced.

Continuous activation of PpIX by daylight is as effective as and less painful than conventional photodynamic therapy for actinic keratoses; a randomized, controlled, single-blinded study

DEFF Research Database (Denmark)

Wiegell, S.R.; Hædersdal, Merete; Philipsen, P.A.

2008-01-01

of the face and scalp were treated with MAL-PDT in two symmetrical areas. One area was illuminated by red LED light (37 J cm(-2)) after 3-h incubation with MAL under occlusive dressing. The other area was treated with daylight for 2.5 h after the MAL cream had been under occlusion for half an hour. Results We...... found no significant difference in the treatment effect between the two treatments (P = 0.13), with a reduction of AK lesions of 79% in the daylight area compared with 71% in the LED area. Treatment response in the daylight area did not depend on the intensity of the daylight. Illumination with LED...... of porphyrins during its formation. Objectives The objective of this randomized controlled study was to compare response rates and adverse effects after methyl aminolevulinate (MAL)-PDT using conventional red light-emitting diode (LED) light vs. daylight. Patients/methods Twenty-nine patients with AK...

The characterisation of the daylighting properties of special glazings and solar shading devices

NARCIS (Netherlands)

Dijk, H.A.L. van; Bakker, L.G.

1998-01-01

Within the EU DGXII R&D Programme JOULE a project, called REVIS. started in 1998 and will be completed within 2.5 years, with the objective to develop detailed daylight product information of novel products of glazings and solar shading devices. This involves a test procedure, definition of product

Change in the Classroom Deportment of Children Following Change From Daylight Saving Time.

Science.gov (United States)

Hicks, Robert A.; And Others

1980-01-01

The deportment of each student in a third-grade classroom was rated by the teacher before and after the fall change from daylight savings time, to see if this disruption in circadian rhythms alters behavior. The deportment of boys improved significantly while the deportment of girls was significantly disrupted. (Author/SJL)

Byron G. Rogers Federal Building Harvests Daylight and Super Savings

Energy Technology Data Exchange (ETDEWEB)

None

2017-01-01

Case study describes how the Byron G. Rogers Federal Building replaced existing T12 and T8 luminaires with LED dedicated troffers with advanced controls. Together these measures cut lighting energy use by nearly 60% in the 18-story, 791,000-square-foot facility. The new lighting control system provides automated dimming of lights down to 0% output when daylight provides adequate light levels. The project earned GSA an award for exemplary performance from the Interior Lighting Campaign in 2016.

Energy and environment in an architectural design application

Energy Technology Data Exchange (ETDEWEB)

Schiller, Silvia de; Evans, John Martin [Universidad de Buenos Aires, Facultad de Arquitectura, Diseno y Urbanismo, Buenos Aires (Argentina)

1998-09-01

Office buildings with important administrative functions can produce high energy demands for lighting, cooling and heating. However, appropriate architectural design can achieve significant energy savings and improve environmental conditions, without sacrificing architectural quality. Intense solar radiation and high temperature swings in dry continental climates favour deep plan offices, though natural daylight requires limited depth. This paper presents a case study of a large administrative complex project for the Justice Palace, Neuquen Province, in the cold windy sem-desert climate in the Northern Patagonia Region of Argentina, demonstrating the relevance of specialised advisory services in the architectural field. (Author)

Enhanced Photocatalytic Degradation of Methyl Orange Dye under the Daylight Irradiation over CN-TiO₂ Modified with OMS-2.

Science.gov (United States)

Hassan, Mohamed Elfatih; Chen, Jing; Liu, Guanglong; Zhu, Duanwei; Cai, Jianbo

2014-12-12

In this study, CN-TiO₂ was modified with cryptomelane octahedral molecular sieves (OMS-2) by the sol-gel method based on the self-assembly technique to enhance its photocatalytic activity under the daylight irradiation. The synthesized samples were characterized by X-ray diffraction (XRD), UV-vis spectroscopy, Fourier transform infrared spectroscopy (FT-IR) and porosimeter analysis. The results showed that the addition of OMS-2 in the sol lead to higher Brunauer-Emmett-Teller (BET) surface area, pore volume, porosity of particle after heat treatment and the specific surface area, porosity, crystallite size and pore size distribution could be controlled by adjusting the calcination temperature. Compared to the CN-TiO₂-400 sample, CN-TiO₂/OMS-2-400 exhibited greater red shift in absorption edge of samples in visible region due to the OMS-2 coated. The enhancement of photocatalytic activity of CN-TiO₂/OMS-2 composite photocatalyst was subsequently evaluated for the degradation of the methyl orange dye under the daylight irradiation in water. The results showed that the methyl orange dye degradation rate reach to 37.8% for the CN-TiO₂/OMS-2-400 sample under the daylight irradiation for 5 h, which was higher than that of reference sample. The enhancement in daylight photocatalytic activities of the CN-TiO₂/OMS samples could be attributed to the synergistic effects of OMS-2 coated, larger surface area and red shift in adsorption edge of the prepared sample.

The influence of the lateral distances between buildings on the availability of indoor daylighting

Directory of Open Access Journals (Sweden)

Andrea Coelho Laranja

2014-12-01

Full Text Available This study addresses aspects related to daylighting in the indoor environment, more specifically the influence of lateral distances between obstructing buildings on the availability of indoor daylighting, taking the height of the buildings and width of the roads into account. In accordance with the adopted methodology, comparisons were made of the percentage of illuminance values of the internal environment by using UDI (Useful Daylight Illuminance ranges on a selected point within an interior environment with an opening oriented to the North. The percentages of illuminance values were generated by simulation using the TropLux program in a rectangular geometry environment inserted in an urban setting in the city of Vitória, Espírito Santo (Latitude 20°19'S. The simulations were carried out for three types of sky patterns recognized by the CIE (Commission Internationale L'aclairage. One of the main results of this study was that, in locations with sky types 3 (overcast, 7 (partly cloudy, and 12 (clear, there were greater variations in the average annual internal illuminance when there were changes in the lateral distances between the obstructing buildings that were not directly in front of the building that was being analyzed. It was also found that in area with sky types 3 (overcast, 7 (partly cloudy, and 12 (clear, changes in the lateral distances between the three obstructing buildings had little effect on percentage changes in the 100≤UDI≤500 lux range and 500≤UDI ≤2000 lux range.

Natural light illumination system.

Science.gov (United States)

Whang, Allen Jong-Woei; Chen, Yi-Yung; Yang, Shu-Hua; Pan, Po-Hsuan; Chou, Kao-Hsu; Lee, Yu-Chi; Lee, Zong-Yi; Chen, Chi-An; Chen, Cheng-Nan

2010-12-10

In recent years, green energy has undergone a lot of development and has been the subject of many applications. Many research studies have focused on illumination with sunlight as a means of saving energy and creating healthy lighting. Natural light illumination systems have collecting, transmitting, and lighting elements. Today, most daylight collectors use dynamic concentrators; these include Sun tracking systems. However, this design is too expensive to be cost effective. To create a low-cost collector that can be easily installed on a large building, we have designed a static concentrator, which is prismatic and cascadable, to collect sunlight for indoor illumination. The transmission component uses a large number of optical fibers. Because optical fibers are expensive, this means that most of the cost for the system will be related to transmission. In this paper, we also use a prismatic structure to design an optical coupler for coupling n to 1. With the n-to-1 coupler, the number of optical fibers necessary can be greatly reduced. Although this new natural light illumination system can effectively guide collected sunlight and send it to the basement or to other indoor places for healthy lighting, previously there has been no way to manage the collected sunlight when lighting was not desired. To solve this problem, we have designed an optical switch and a beam splitter to control and separate the transmitted light. When replacing traditional sources, the lighting should have similar characteristics, such as intensity distribution and geometric parameters, to those of traditional artificial sources. We have designed, simulated, and optimized an illumination lightpipe with a dot pattern to redistribute the collected sunlight from the natural light illumination system such that it equals the qualities of a traditional lighting system. We also provide an active lighting module that provides lighting from the natural light illumination system or LED auxiliary

Establishment and verification of solar radiation calculation model of glass daylighting roof in hot summer and warm winter zone in China

OpenAIRE

Zheng, Caidan; Wu, Peihao; Costanzo, Vincenzo; Wang, Yuchen; Yang, Xiaokun

2017-01-01

In this paper, solar heat gain through glass daylighting roof is deeply studied by theoretical calculation method, taking Guangzhou in the Hot Summer and Warm Winter (HSWW) zone as an example. The direct solar radiation is calculated by Bouguer formula whereas the diffuse solar radiation is calculated by Berlage formula, representing the basis for the calculation method of the solar radiation intensity through the glass daylighting roof. Through the establishment of solar radiation calculatio...

Environmental performance of a naturally ventilated city centre library

Energy Technology Data Exchange (ETDEWEB)

Krausse, Birgit; Cook, Malcolm; Lomas, Kevin [Institute of Energy and Sustainable Development, De Montfort University, Queens Building, The Gateway, Leicester LE1 9BH, (United Kingdom)

2007-07-15

To tackle climate change it is essential to reduce carbon dioxide emissions. To this end, it is important to reduce the energy demands of non-domestic buildings. Naturally ventilated buildings can have low energy demands but the strategy is difficult to implement in deep plan, urban locations. The Frederick Lanchester Library at Coventry University, UK, incorporates natural ventilation, daylighting and passive cooling strategies. By using lightwells and perimeter stacks to supply and exhaust air, it can be ventilated by natural means despite its deep plan form and sealed facade. This paper describes the building and presents the energy consumption and the internal temperatures and CO{sub 2} levels recorded in 2004/2005. The building's performance is compared to the original design criteria and good practice guidelines. Recommendations for the design of such buildings are made and the likely performance in other UK cities is assessed. It is concluded that the building uses under half the energy of a standard air-conditioned building and yet, in summer, can keep the interior comfortable and up to 5 deg C below ambient. The design would perform equally well in the typical weather conditions experienced at 13 other UK cities, but not in London. It is concluded that deep-plan, naturally ventilated buildings with sealed facades, if well designed, could maintain thermal comfort in all but a very few UK locations, whilst consuming much less energy than even good practice standards. (Author)

Mathematical model quantifies multiple daylight exposure and burial events for rock surfaces using luminescence dating

DEFF Research Database (Denmark)

Freiesleben, Trine Holm; Sohbati, Reza; Murray, Andrew

2015-01-01

Interest in the optically stimulated luminescence (OSL) dating of rock surfaces has increased significantly over the last few years, as the potential of the method has been explored. It has been realized that luminescence-depth profiles show qualitative evidence for multiple daylight exposure...... and burial events. To quantify both burial and exposure events a new mathematical model is developed by expanding the existing models of evolution of luminescenceedepth profiles, to include repeated sequential events of burial and exposure to daylight. This new model is applied to an infrared stimulated...... events. This study confirms the suggestion that rock surfaces contain a record of exposure and burial history, and that these events can be quantified. The burial age of rock surfaces can thus be dated with confidence, based on a knowledge of their pre-burial light exposure; it may also be possible...

External perforated Solar Screens for daylighting in residential desert buildings: Identification of minimum perforation percentages

KAUST Repository

Sherif, Ahmed; Sabry, Hanan; Rakha, Tarek

2012-01-01

and Saudi Arabia, result in the admittance of direct solar radiation, which leads to thermal discomfort and the incidence of undesired glare. One type of shading systems that is used to permit daylight while controlling solar penetration is " Solar Screens

Design of Natural and Hybrid Ventilation

DEFF Research Database (Denmark)

Heiselberg, Per

The effectiveness of natural ventilation, i.e. its ability to ensure indoor air quality and passive cooling in a building, depends greatly on the design process. Mechanical ventilation systems can be designed separately from the design of the building in which they are installed. They can also...... be installed in existing buildings after a few modifications. In contrast, ventilation systems using only natural forces such as wind and thermal buoyancy need to be designed together with the building, since the building itself and its components are the elements that can reduce or increase air movement...... as well as influence the air content (dust, pollution etc.). Architects and engineers need to acquire qualitative and quantitative information about the interactions between building characteristics and natural ventilation in order to design buildings and systems consistent with a passive low...

Flexible Dermal Armor : Designs Learned from Nature

OpenAIRE

Chen, Irene Hsu

2015-01-01

Designs derived from nature have become a perfect blueprint for today's engineers and scientists to follow and implement. One particularly noted area is the defense industry, wherein flexible dermal armor inspired by nature has been pioneering many sophisticated technologies and designs in recent years. Designers today are considering borrowing aspects of flexibility and mobility of natural dermal armors to enhance the maneuverability of man-made armor by imitating the following mechanisms : ...

Daylight Management in Mediterranean Cities: When Shortage Is Not the Issue

Directory of Open Access Journals (Sweden)

Judit Lopez-Besora

2016-09-01

Full Text Available Natural resources such as daylight and sunlight are highly appreciated in countries with prevailing overcast skies. Taking advantage of this scarce resource contributes to saving energy on artificial lighting. In contrast to northern, southern European cities are distinguished by a large number of days with direct sunlight caused by a propitious climate condition. While it is a positive issue in terms of energy availability, the abundance of it can be counterproductive if management measures are not taken. Apart from the thermal consequences, lighting penetration into buildings causes a great contrast between inside and outside. This is especially critical when the visual system does not have enough time to adapt, as happens at entrance areas. The aim of this study is to analyze the light contrast between these areas and the urban outside in sunny conditions. To attain this objective, light data from five entrance spaces and their contiguous streets were analyzed and measured. The results were divided into three zones in the visual scene, showing an increasing contrast from top to bottom of the visual field. It may be concluded that interventions applied to urban areas and building pavements can improve visual adaptation in the transition zone.

Effect of short-term simulated daylight exposure on optically brightened papers

International Nuclear Information System (INIS)

Green, Phil; Honess, Mike

2010-01-01

Two optically brightened commercial papers were subjected to 72 hours continuous exposure to graphic arts daylight simulating fluorescent lamps at 1.4 and 4.4 klux. At the higher illuminance level, a CIELAB colour difference of 1.0 was reached in approximately 3 and 50 hours for the two papers. The colour differences produced by the 1.4 klux exposure were greater than that predicted by assuming a linear relationship between intensity and colour change, by a factor of 1.8.

Vermont Designated Natural Areas

Data.gov (United States)

Vermont Center for Geographic Information — Under Natural Areas Law (10 Vermont Statutes Annotated, Chapter 83 � 2607) the FPR commissioner, with the approval of the governor, may designate and set aside areas...

Practical approach to the use of daylight photodynamic therapy with topical methyl aminolevulinate for actinic keratosis

DEFF Research Database (Denmark)

Morton, C A; Wulf, H C; Szeimies, R M

2015-01-01

INTRODUCTION: Daylight-mediated photodynamic therapy has been shown to be an effective therapy for actinic keratoses (AKs) and a simple and tolerable treatment procedure in three randomized Scandinavian studies and two recent Phase III randomized controlled studies in Australia and Europe...

Light-scattering properties of a woven shade-screen material used for daylighting and solar heat-gain control

Energy Technology Data Exchange (ETDEWEB)

Jonsson, Jacob; Jonsson, Jacob C.; Lee, Eleanor S.; Rubin, Mike

2008-08-01

Shade-screens are widely used in commercial buildings as a way to limit the amount of direct sunlight that can disturb people in the building. The shade screens also reduce the solar heat-gain through glazing the system. Modern energy and daylighting analysis software such as EnergyPlus and Radiance require complete scattering properties of the scattering materials in the system. In this paper a shade screen used in the LBNL daylighting testbed is characterized using a photogoniometer and a normal angle of incidence integrating sphere. The data is used to create a complete bi-directional scattering distribution function (BSDF) that can be used in simulation programs. The resulting BSDF is compared to a model BADFs, both directly and by calculating the solar heat-gain coefficient for a dual pane system using Window 6.

Technology Assessments of High Performance Envelope with Optimized Lighting, Solar Control, and Daylighting

Energy Technology Data Exchange (ETDEWEB)

Lee, Eleanor S.; Thanachareonkit, Anothai; Touzani, Samir; Dutton, Spencer; Shackelford, Jordan; Dickerhoff, Darryl; Selkowitz, Stephen

2016-09-01

The objective of this monitored field study was to identify near-term innovative façade technologies for solar control and daylighting with a goal of 20-40% energy use savings below Title 24 2013 in the 30-ft deep perimeter zone near vertical windows within cost and comfort constraints. The targeted market was new or existing commercial office buildings or buildings with similar patterns of use.

Critical analysis of the daylight saving time; Analisis critico al horario del verano

Energy Technology Data Exchange (ETDEWEB)

Romero Paredes Rubio, Hernando [Universidad Autonoma Metropolitana Ciudad-Ixtapalapa, Mexico, D.F., (Mexico)

2001-07-01

The critical analysis is presented as a synthesis of the problem untied since the implementation of the daylight saving time. The often related history is retaken to introduce the reader into the context of the causes of a such program. The geometric aspect of the solar trajectories is discussed and the length of the day as a function of the latitude and the time of the year to have technical elements for the time displacement in a certain region. The technical implementation of the daylight saving time based on three elements is justified: time of dawn and the decline (length of the day), national economic motivation and tourism industry. Stands out that although the daylight saving time schedule has a set of social and economic benefits it is not centered in the individual but in the society as a whole. The errors in handling the information and the misinformation are pointed out as the main causes of the controversy, the discord and the political manipulation of competing groups. [Spanish] El analisis critico se presenta como una sintesis del problema desatado desde la implementacion del horario de verano. La historia muchas veces contada se retoma para introducir al lector en el contexto de las causas de un tal programa. Se discute el aspecto geometrico de las trayectorias solares y la longitud del dia como una funcion de la latitud y de la epoca del ano para tener elementos tecnicos para el desplazamiento horario en una region determinada. Se justifica la implementacion tecnica del horario de verano en funcion de tres elementos: hora de alba y del ocaso (longitud del dia), motivacion economica nacional e industria turistica. Se destaca que si bien el horario de verano tiene un conjunto de beneficios sociales y economicos no se centra en el individuo sino en la sociedad en su conjunto. Se senalan los errores de manejo de la informacion y la desinformacion como los principales causantes de la polemica, el desacuerdo y la manipulacion politica de grupos

Home, Smart Home

DEFF Research Database (Denmark)

Hansen, Ellen Kathrine; Olesen, Gitte Gylling Hammershøj; Mullins, Michael

2013-01-01

The article places focus on how smart technologies integrated in a one family- home and particular the window offer unique challenges and opportunities for designing buildings with the best possible environments for people and nature. Toward an interdisciplinary approach, we address the interaction...... between daylight defined in technical terms and daylight defined in aesthetic, architectural terms. Through field-tests of a Danish carbon-neutral home and an analysis of five key design parameters, we explore the contradictions and potentials in smart buildings, using the smart window as example of how...... to the energy design is central. The study illuminates an approach of the design of smart houses as living organisms by connecting technology with the needs of the occupants with the power and beauty of daylight....

Development of a new model to predict indoor daylighting: Integration in CODYRUN software and validation

Energy Technology Data Exchange (ETDEWEB)

Fakra, A.H., E-mail: fakra@univ-reunion.f [Physics and Mathematical Engineering Laboratory for Energy and Environment (PIMENT), University of La Reunion, 117 rue du General Ailleret, 97430 Le Tampon (French Overseas Dpt.), Reunion (France); Miranville, F.; Boyer, H.; Guichard, S. [Physics and Mathematical Engineering Laboratory for Energy and Environment (PIMENT), University of La Reunion, 117 rue du General Ailleret, 97430 Le Tampon (French Overseas Dpt.), Reunion (France)

2011-07-15

Research highlights: {yields} This study presents a new model capable to simulate indoor daylighting. {yields} The model was introduced in research software called CODYRUN. {yields} The validation of the code was realized from a lot of tests cases. -- Abstract: Many models exist in the scientific literature for determining indoor daylighting values. They are classified in three categories: numerical, simplified and empirical models. Nevertheless, each of these categories of models are not convenient for every application. Indeed, the numerical model requires high calculation time; conditions of use of the simplified models are limited, and experimental models need not only important financial resources but also a perfect control of experimental devices (e.g. scale model), as well as climatic characteristics of the location (e.g. in situ experiment). In this article, a new model based on a combination of multiple simplified models is established. The objective is to improve this category of model. The originality of our paper relies on the coupling of several simplified models of indoor daylighting calculations. The accuracy of the simulation code, introduced into CODYRUN software to simulate correctly indoor illuminance, is then verified. Besides, the software consists of a numerical building simulation code, developed in the Physics and Mathematical Engineering Laboratory for Energy and Environment (PIMENT) at the University of Reunion. Initially dedicated to the thermal, airflow and hydrous phenomena in the buildings, the software has been completed for the calculation of indoor daylighting. New models and algorithms - which rely on a semi-detailed approach - will be presented in this paper. In order to validate the accuracy of the integrated models, many test cases have been considered as analytical, inter-software comparisons and experimental comparisons. In order to prove the accuracy of the new model - which can properly simulate the illuminance - a

The Experience of Dynamic Lighting

DEFF Research Database (Denmark)

Petersen, Kjell Yngve; Kristensen, Ole

2017-01-01

of daylight openings and the experience of spatial form. However, current developments in LED light sources (light emitting diodes) and adaptive software control systems allow for an enhanced correlation between daylight and artificial lighting, where the variations of the daylight are dynamically...... supplemented by variations in the artificial lighting. The suggestion is to develop a particular type of Observational Instrument that situates detailed experiential investigations into the design potentials of integration of natural and artificial lighting, and thereby to enable differentiated dynamic...

Informing Healthcare Waiting Area Design Using Transparency Attributes: A Comparative Preference Study.

Science.gov (United States)

Jiang, Shan; Powers, Matthew; Allison, David; Vincent, Ellen

2017-07-01

This study aimed to explore people's visual preference for waiting areas in general hospital environments designed with transparency attributes that fully integrate nature. Waiting can be a tedious and frustrating experience among people seeking healthcare treatments and negatively affect their perception of the quality of care. Positive distractions and supportive designs have gained increasing attraction to improve people's waiting experience. Nature, which has shown therapeutic effects according to a growing amount of evidence, could be a distinguished positive distraction in waiting areas. Additionally, the theory of transparency was operationalized to indicate a spatial continuity between the external nature and the built interiors in general healthcare waiting area design. A survey method was adopted in the study. Twenty-one images of general healthcare waiting areas depicting three design typologies were preselected following a strict procedure, including designs with (a) no window views, (b) limited window views to nature, and (c) transparent spaces with maximum natural views. Ninety-five student participants rated the images based on their visual preference using a Likert-type scale. The results showed that transparent waiting areas were significantly preferred. A significant positive relationship existed between the level of transparency and people's preference scores. The factor analysis indicated additional supportive features that may affect people's preferences, including daylight, perceived warmth, noninstitutional furniture arrangement, visual orientation, and the use of natural materials for interior design. However, these tentative results need to be furthered tested with the real patient population as the next step of this study.

Low cost data acquisition module for evaluating the quantitative performance of daylight systems

Energy Technology Data Exchange (ETDEWEB)

Ciampini, F.; Scarazzato, P.S. [Universidade Estadual de Campinas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo, P.O. Box 6021, CEP 13083-852 Campinas (Brazil); Neves, A.A.R. [Universidade Estadual de Campinas, Instituto de Fisica Gleb Wataghin, Departamento de Eletronica Quantica, P.O. Box 6165, 13083-970 Campinas (Brazil); Pereira, D.C.L.; Yamanaka, M.H. [Universidade de Sao Paulo, Faculdade de Arquitetura e Urbanismo, Departamento de Tecnologia da Arquitetura, Rua do Lago, 878 CEP 05508-080, Sao Paulo (Brazil)

2007-09-15

The search for efficient, auto-sustainable constructions that allows the user a contact with the outer environment has stimulated the development of advanced strategies, in various devices, for the exploitation of the daylight. A low cost data acquisition system was developed in this study, to observe the distribution of the natural light inside a prototype and to evaluate the quantitative performance for redirecting systems. The luminous sensor is a light dependent resistor, that responds to the illuminance with a reduction in the resistance when illuminated, through a log-log dependence. Calibration curves are set up to relate the change of resistance to absolute illuminance. It therefore provides a continuous investigation of the illuminance for various sampled points in the interior test space with a 0.03% digital error due to the 12-bit resolution. The final measured error of 5% is mainly due to the system calibration and resistance memory history. The circuit connects to a standard parallel port of any Personal Computer and supplies 64 analog inputs, one for each luminous sensor. The circuit can be easily modified to attend different quantities of analog inputs or communication ports. (author)

Photoageing of Baltic amber-influence of daylight radiation behind window glass on surface colour and chemistry

DEFF Research Database (Denmark)

Shashoua, Yvonne

2011-01-01

The aim of this study was to provide evidence about the interaction between Baltic amber and daylight behind window glass, essential to understanding the mechanisms by which the material degrades in museum environments and to propose techniques for preventive conservation based on the control...

Rapid microwave-assisted nonaqueous synthesis and growth mechanism of AgCl/Ag, and its daylight-driven plasmonic photocatalysis.

Science.gov (United States)

Jiang, Jing; Zhang, Lizhi

2011-03-21

We report on a rapid microwave-assisted nonaqueous synthesis and the growth mechanism of AgCl/Ag with controlled size and shape. By rationally varying the reaction temperature and the microwave irradiation time, we achieved the transformation of nanocubes to rounded triangular pyramids by a combined process of "oriented attachment" and Ostwald ripening. The surface plasmon resonance (SPR) properties of the as-prepared AgCl/Ag have been found to be somewhat dependent on the size, morphology, and composition. The as-prepared AgCl/Ag exhibits high photocatalytic activity and good reusability for decomposing organic pollutants (such as methyl orange (MO), rhodamine B (RhB), and pentachlorophenol (PCP)) under indoor artificial daylight illumination (ca. 1 mW cm(-2)). The AgCl/Ag has also been found to display a superior ability to harvest diffuse indoor daylight (ca. 5 mW cm(-2)), and could complete the degradation of 10 mg  L(-1) MO within 15 min. Experiments involving the trapping of active species have shown that the photocatalytic degradation of organic pollutants in the AgCl/Ag system may proceed through direct hole transfer. This study has revealed that plasmonic daylight photocatalysis may open a new frontier for indoor pollutant control around the clock under fluorescent lamp illumination. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A geostatistical analysis of IBTS data for age 2 North Sea haddock ( Melanogrammus aeglefinus ) considering daylight effects

DEFF Research Database (Denmark)

Wieland, Kai; Rivoirard, J.

2001-01-01

to ordinary kriging being most pronounced for years characterized by a high portion of night hauls and a low mean catch rate at night. This demonstrates that external drift kriging with a day/night indicator but preferably with time of day is capable of compensating successfully for daylight effects...... are included in the estimation without any correction for possible daylight effects. In the present study, ordinary kriging was used to correct for sampling irregularities and external drift kriging with a day/night indicator or a cosine function of time of day was applied to account additionally for diurnal...... differences in the catch rates. Only minor differences between the standard indices and the abundance estimates obtained by ordinary kriging were found. In contrast, the external drift kriging, particularly with time of day, yielded higher estimates of mean abundance for all years with the differences...

Temperatura de color correlacionada de la luz natural: análisis dinámico en espacios interiores

Directory of Open Access Journals (Sweden)

Monteoliva, J. M.

2015-12-01

Full Text Available Currently daylight studies are focused on visual amenity. This new trend arises from the need of professionals and researchers to define indicators of daylight quality. One such indicator is the correlated color temperature (CCT. In this paper, the influence of windows orientation and shading systems in color perception of the environment (CCT is discussed. To achieve this goal a dynamic (spatial and temporal characterization methodology of daylight source CCT is proposed. The analysis was performed on a scale model of an indoor space, under clear sky conditions. Results showed the importance of the window orientation in the indoor CCT of daylight, obtaining variations of up to 50 %. It is also noted that shading device cause changes in indoor configurations and sensations. Also here the impact of shading systems and glass on the TCC of natural light entering a space was analyzedActualmente los estudios de la iluminación natural focalizan en la amabilidad visual del espacio. Esta nueva tendencia surge de la necesidad de profesionales e investigadores de definir indicadores de la calidad de la iluminación natural. Uno de ellos es la temperatura de color correlacionada (TCC. En este trabajo, se propone analizar la influencia de la orientación de las ventanas y sus sistemas de sombreado en la percepción de color del ambiente (TCC. Para ello se propone una metodología de caracterización dinámica (espacial y temporal de la TCC de la fuente luz natural. El análisis se desarrolló en un modelo a escala de un espacio interior, bajo condiciones de cielo claro. Los resultados han evidenciado la importancia de la orientación de la ventana en la TCC de un espacio, obteniendo variaciones de hasta el 50 %. De manera complementaria, se detecta la capacidad de modificar la TCC de los ambientes interiores que poseen las superficies vidriadas y los dispositivos de control solar.

Biomimetics for architecture & design nature, analogies, technology

CERN Document Server

Pohl, Göran

2015-01-01

This book provides the readers with a timely guide to the application of biomimetic principles in architecture and engineering design. As a result of a combined effort by two internationally recognized authorities, the biologist Werner Nachtigall and the architect Göran Pohl, the book describes the principles which can be used to compare nature and technology, and at the same time it presents detailed explanations and examples showing how biology can be used as a source of inspiration and “translated” in building and architectural solutions (biomimicry). Even though nature cannot be directly copied, the living world can provide architects and engineers with a wealth of analogues and inspirations for their own creative designs. But how can analysis of natural entities give rise to advanced and sustainable design? By reporting on the latest bionic design methods and using extensive artwork, the book guides readers through the field of nature-inspired architecture, offering an extraordinary resource for pro...

Brand logo design: examining consumer response to naturalness

OpenAIRE

Machado, Joana Machado; Vacas-de-Carvalho, Leonor; Torres, Anna; Costa, Patrício

2015-01-01

Purpose – This paper aims to study how logo design characteristics influence consumer response. Based on an in-depth literature review on consumer responses to logo design, the authors included in this research one fundamental dimension of logo design, namely, naturalness and investigated the influence of the different types of natural logo designs on affective response. Design/methodology/approach – In total, 96 logos were selected as design stimuli. The logos were previously classi...

Effects of Daylight Saving Time changes on stock market volatility: a reply.

Science.gov (United States)

Berument, Hakan; Dogan, Nukhet

2011-12-01

There is a rich array of evidence that suggests that changes in sleeping patterns affect an individual's decision-making processes. A nationwide sleeping-pattern change happens twice a year when the Daylight Saving Time (DST) change occurs. Kamstra, Kramer, and Levi argued in 2000 that a DST change lowers stock market returns. This study presents evidence that DST changes affect the relationship between stock market return and volatility. Empirical evidence suggests that the positive relationship between return and volatility becomes negative on the Mondays following DST changes.

Computational Design for Sport Building

NARCIS (Netherlands)

Turrin, M.; Yang, D.; D'Aquilio, A.; Šileryte, R.; Sun, Y

2016-01-01

The design of sport buildings has great impact on top-sport as well as on recreational sport-activities. It implies challenging tasks in meeting the performance-requirements. This includes the control of factors like daylight/lighting, air flow, thermal conditions, just to name a few. Such factors

TCM in lighting design : an integrative medical methodology in light research

NARCIS (Netherlands)

Pan, Y.; Zielinska-Dabkowska, Karolina M.; Rohde, Michael F.

2017-01-01

The advancement of artificial lighting technology has enabled a lifestyle free from the restriction of natural daylight. However, scientists have discovered that light, assisting the cardiovascular system and synchronizing the biological clock, is a vital form of energy and information to sustain

Modeling Performance of an Airborne Infrared Sensor Used by a Man-in-the-Loop in Tactical Aircraft during Daylight Operations

National Research Council Canada - National Science Library

Harder, James

1998-01-01

.... The best monochromatic tactical aircraft displays are contrast limited during daylight operations and are able to reproduce only a fraction of the available dynamic range of current generation IR imaging sensors...

The integration of engineering and architecture: A perspective on natural ventilation for the new San Francisco Federal Building

International Nuclear Information System (INIS)

McConahey, Erin; Haves, Philip; Christ, Tim

2002-01-01

A description of the in-progress design of a new Federal Office Building for San Francisco is used to illustrate a number of issues arising in the design of large, naturally ventilated office buildings. These issues include the need for an integrated approach to design involving the architects, mechanical and structural engineers, lighting designers and specialist simulation modelers. In particular, the use of natural ventilation, and the avoidance of air-conditioning, depends on the high degree of exposed thermal mass made possible by the structural scheme and by the minimization of solar heat gains while maintaining the good daylighting that results from optimization of the facade. Another issue was the need for a radical change in interior space planning in order to enhance the natural ventilation; all the individual enclosed offices are located along the central spine of each floorplate rather than at the perimeter. The role of integration in deterring the undermining of the design through value engineering is discussed. The comfort criteria for the building were established based on the recent extension to the ASHRAE comfort standard based on the adaptive model for naturally ventilated buildings. The building energy simulation program EnergyPlus was used to compare the performance of different natural ventilation strategies. The results indicate that, in the San Francisco climate, wind-driven ventilation provides sufficient nocturnal cooling to maintain comfortable conditions and that external chimneys do not provide significant additional ventilation at times when it when it would be beneficial

Daylight saving time can decrease the frequency of wildlife–vehicle collisions

Science.gov (United States)

Ellis, William A.; FitzGibbon, Sean I.; Barth, Benjamin J.; Niehaus, Amanda C.; David, Gwendolyn K.; Taylor, Brendan D.; Matsushige, Helena; Melzer, Alistair; Bercovitch, Fred B.; Carrick, Frank; Jones, Darryl N.; Dexter, Cathryn; Gillett, Amber; Predavec, Martin; Lunney, Dan

2016-01-01

Daylight saving time (DST) could reduce collisions with wildlife by changing the timing of commuter traffic relative to the behaviour of nocturnal animals. To test this idea, we tracked wild koalas (Phascolarctos cinereus) in southeast Queensland, where koalas have declined by 80% in the last 20 years, and compared their movements with traffic patterns along roads where they are often killed. Using a simple model, we found that DST could decrease collisions with koalas by 8% on weekdays and 11% at weekends, simply by shifting the timing of traffic relative to darkness. Wildlife conservation and road safety should become part of the debate on DST. PMID:27881767

Economic analysis of the daylight-linked lighting control system in office buildings

Energy Technology Data Exchange (ETDEWEB)

Yang, In-Ho; Nam, Eun-Ji [Department of Architectural Engineering, College of Engineering, Dongguk University, 26-3, Pil-dong, Chung-gu, Seoul 100-715 (Korea)

2010-08-15

The objective of this study is to perform an economic analysis of the daylight-linked automatic on/off lighting control system installed for the purpose of energy savings in office buildings. For this, a building was chosen as a typical example, and the energy cost was calculated by using the daylight and building energy analysis simulation. When the lighting control was utilized, an economic analysis was performed using a payback period that was calculated by comparing the initial cost of installing the lighting control system with the annual energy cost which was reduced thanks to the application of the lighting control. The results showed that the lighting energy consumption, when the lighting control was applied, was reduced by an average of 30.5% compared with the case that there was not lighting control applied. Also, the result for total energy consumption showed that, when lighting control was applied, this was reduced by 8.5% when the glazing ratio was 100%, 8.2% for 80%, and 7.6% for 60% when compared to non-application. The payback period was analyzed in terms of the number of floors in a building; 10 floors, 20 floors, 30 floors, and 40 floors. Hence, the building with 40 floors and glazing ratio 100% resulted in the shortest payback period of 8.8 years, the building with 10 floors and glazing ratio 60% resulted in the longest period of 12.7 years. In other words, the larger the glazing ratio and the number of building floors are, the shorter the payback period is. (author)

Optimum Design Parameters of Box Window DSF Office at Different Glazing Types under Sub Interval of Intermediate Sky Conditions (20-40 klux)

Science.gov (United States)

Elayeb, O. K.; Alghoul, M. A.; Sopian, K.; Khrita, N. G.

2017-11-01

Despite Double skin façade (DSF) buildings are widely deployed worldwide, daylighting strategy is not commonly incorporated in these buildings compare to other strategies. Therefore, further theoretical and experimental studies would lead to adopting daylighting strategy in DSF office buildings. The aim of this study is to investigate the daylighting performance of office building at different design parameters of box window DSF using different glazing types under sub interval of intermediate sky conditions (20-40) klux using the (IES VE) simulation tool from Integrated Environmental Solutions - Virtual Environment. The implemented design parameters are window wall ratio (WWR) of internal façade (10-100) %, cavity depth (CD) of DSF (1-2.5) m and different glazing types. The glazing types were selected from the list available in the (IES VE) simulation tool. After series of evaluations, bronze tinted coating (STOPSOL) is implemented for the exterior façade while clear float, clear reflective coating (STOPSOL), grey and brown tinted coating (Anti-sun float) and blue coating tinted (SUNCOOL float) are implemented for the interior façade. In this paper, several evaluation parameters are used to quantify the optimum design parameters that would balance the daylighting requirements of a box window DSF office versus sky conditions range (20-40) klux. The optimum design parameters of DSF office building obtained under different glazing types are highlighted as follows. When using bronze tinted coating (STOPSOL) for the exterior façade, the glazing types of interior façade that showed superior daylighting performance of DSF office at (CD of 1.0m with WWR of 70%), (CD of 1.5m with WWR of 70%), (CD of 2.0m with WWR of 70%) and (CD of 2.0m with WWR of 70%) are grey tinted coating (Anti-sun float), clear reflective coating (STOPSOL), brown tinted coating (Anti-sun float), and clear float glazing respectively. Blue Coating tinted (SUNCOOL float) of interior façade glazing

Does extending daylight saving time save energy? Evidence from an Australian experiment

Energy Technology Data Exchange (ETDEWEB)

Kellogg, R. [California Univ., Berkeley, CA (United States). Dept. of Agricultural and Resource Economics; Wolff, H. [California Univ., Berkeley, CA (United States). Dept. of Agricultural and Resource Economics]|[Forschungsinstitut zur Zukunft der Arbeit (IZA), Bonn (Germany)

2007-03-15

Several countries are considering extending Daylight Saving Time (DST) in order to conserve energy, and the U.S. will extend DST by one month beginning in 2007. However, projections that these extensions will reduce electricity consumption rely on extrapolations and simulations rather than empirical evidence. This paper, in contrast, examines a quasiexperiment in which parts of Australia extended DST in 2000 to facilitate the Sydney Olympics. Using detailed panel data and a triple differences specification, we show that the extension did not conserve electricity, and that a prominent simulation model overstates electricity savings when it is applied to Australia. (orig.)

Assessment of building facade performance in terms of daylighting and the associated energy consumption in architectural spaces: Vertical and horizontal shading devices for southern exposure facades

Energy Technology Data Exchange (ETDEWEB)

Alzoubi, Hussain H.; Al-Zoubi, Amneh H. [Department of Architecture, Jordan University of Science and Technology, Irbid 22110 (Jordan)

2010-08-15

This paper examines the effect of vertical and horizontal shading devices on the quality of daylight in buildings and the associated energy saving. Excessive daylight in architectural spaces contributes negatively to the energy consumption in buildings. Blinds and shading devices are good solutions to attenuate the surplus amount of daylight in spaces. Accordingly, this study evaluates the effect of shading devices on the amount of light flux and the associated solar energy in buildings. It estimates the energy consumption attributed to lighting spaces for three common positions of shading devices. Computer simulation strategy was undertaken to correlate the illuminance level in spaces with room geometry and architectural shading elements. The Holophane model for lighting calculations was used to estimate the average illuminance level on workplane and correlate it with the expected saving energy in buildings. The study concluded that there is an optimal orientation for shading devices that keeps the internal illuminance level within the acceptable range with minimum amount of solar heat gain. (author)

The effect of dynamic solar shading on energy, daylighting and thermal comfort in a nearly zero-energy loft room in Rome and Copenhagen

DEFF Research Database (Denmark)

Skarning, Gunnlaug Cecilie Jensen; Hviid, Christian Anker; Svendsen, Svend

2017-01-01

alternatives in buildings with very low space-heating demand, this study mapped and compared energy, daylighting and thermal comfort for various combinations of window size and glazing properties, with and without dynamic shading. The study considered a loft room with sloped roof windows and moderate venting...... as defined by the Adaptive Thermal Comfort (ATC) model....... options in nearly zero-energy homes in Rome and Copenhagen. The more flexible solution space with dynamic shading made it possible to either reduce the time with operative temperatures exceeding the comfort limit by 40–50 h or increase daylighting by 750–1000 h more than could be achieved without shading...

A randomized, multicentre study of directed daylight exposure times of 1½ vs. 2½ h in daylight-mediated photodynamic therapy with methyl aminolaevulinate in patients with multiple thin actinic keratoses of the face and scalp

DEFF Research Database (Denmark)

Wiegell, Stine; Fabricius, S; Stender, I M

2011-01-01

Actinic keratoses (AKs) are common dysplastic skin lesions that may differentiate into invasive squamous cell carcinomas. Although a superior cosmetic outcome of photodynamic therapy (PDT) is advantageous compared with equally effective treatments such as cryotherapy and curettage, the inconvenie......, the inconvenience of clinic attendance and discomfort during therapy are significant drawbacks. Daylight-mediated PDT could potentially reduce these and may serve as an alternative to conventional PDT....

Dynamic window daylighting systems: electropolymeric technology for solar responsive building envelopes

Science.gov (United States)

Krietemeyer, Elizabeth A.; Smith, Shane I.; Dyson, Anna H.

2011-04-01

Human health and energy problems associated with the lack of control of sunlight in contemporary buildings have necessitated research into dynamic windows for energy efficient buildings. Existing window technologies have made moderate progress towards greater energy performance for facades but remain limited in their response to dynamic solar conditions, building energy requirements, and variable user preferences for visual comfort. Recent developments in electropolymeric display technology provide opportunities to transfer electroactive polymers to windows that can achieve high levels of geometric and spectral selectivity through the building envelope in order to meet the lighting, thermal and user requirements of occupied spaces. Experimental simulations that investigate daylight quality, energy performance, and architectural effects of electropolymeric glazing technology are presented.

Software for natural gas pipeline design and simulation (gaspisim ...

African Journals Online (AJOL)

Software for natural gas pipeline design and simulation (gaspisim) ... This paper focuses on the development of software for optimum design and simulation of natural gas pipeline. General ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Daylight savings time and myocardial infarction.

Science.gov (United States)

Sandhu, Amneet; Seth, Milan; Gurm, Hitinder S

2014-01-01

Prior research has shown a transient increase in the incidence of acute myocardial infarction (AMI) after daylight savings time (DST) in the spring as well as a decrease in AMI after returning to standard time in the fall. These findings have not been verified in a broader population and if extant, may have significant public health and policy implications. We assessed changes in admissions for AMI undergoing percutaneous coronary intervention (PCI) in the Blue Cross Blue Shield of Michigan Cardiovascular Consortium (BMC2) database for the weeks following the four spring and three fall DST changes between March 2010 and September 2013. A negative binomial regression model was used to adjust for trend and seasonal variation. There was no difference in the total weekly number of PCIs performed for AMI for either the fall or spring time changes in the time period analysed. After adjustment for trend and seasonal effects, the Monday following spring time changes was associated with a 24% increase in daily AMI counts (p=0.011), and the Tuesday following fall changes was conversely associated with a 21% reduction (p=0.044). No other weekdays in the weeks following DST changes demonstrated significant associations. In the week following the seasonal time change, DST impacts the timing of presentations for AMI but does not influence the overall incidence of this disease.

Use of a Novel Rover-mounted Fluorescence Imager and Fluorescent Probes to Detect Biological Material in the Atacama Desert in Daylight

Science.gov (United States)

Weinstein, S.; Pane, D.; Warren-Rhodes, K.; Cockell, C.; Ernst, L. A.; Minkley, E.; Fisher, G.; Emani, S.; Wettergreen, D. S.; Wagner, M.

2005-01-01

We have developed an imaging system, the Fluorescence Imager (FI), for detecting fluorescence signals from sparse microorganisms and biofilms during autonomous rover exploration. The fluorescence signals arise both from naturally occurring chromophores, such as chlorophyll of cyanobacteria and lichens, and from fluorescent probes applied to soil and rocks. Daylight imaging has been accomplished by a novel use of a high-powered flashlamp synchronized to a CCD camera. The fluorescent probes are cell permanent stains that have extremely low intrinsic fluorescence (quantum yields less than 0.01) and a large fluorescence enhancement (quantum yields greater than 0.4) when bound to the target. Each probe specifically targets either carbohydrates, proteins, nucleic acids or membrane lipids, the four classes of macromolecules found in terrestrial life. The intent of the probes is to interrogate the environment for surface and endolithic life forms.

AbDesign: An algorithm for combinatorial backbone design guided by natural conformations and sequences.

Science.gov (United States)

Lapidoth, Gideon D; Baran, Dror; Pszolla, Gabriele M; Norn, Christoffer; Alon, Assaf; Tyka, Michael D; Fleishman, Sarel J

2015-08-01

Computational design of protein function has made substantial progress, generating new enzymes, binders, inhibitors, and nanomaterials not previously seen in nature. However, the ability to design new protein backbones for function--essential to exert control over all polypeptide degrees of freedom--remains a critical challenge. Most previous attempts to design new backbones computed the mainchain from scratch. Here, instead, we describe a combinatorial backbone and sequence optimization algorithm called AbDesign, which leverages the large number of sequences and experimentally determined molecular structures of antibodies to construct new antibody models, dock them against target surfaces and optimize their sequence and backbone conformation for high stability and binding affinity. We used the algorithm to produce antibody designs that target the same molecular surfaces as nine natural, high-affinity antibodies; in five cases interface sequence identity is above 30%, and in four of those the backbone conformation at the core of the antibody binding surface is within 1 Å root-mean square deviation from the natural antibodies. Designs recapitulate polar interaction networks observed in natural complexes, and amino acid sidechain rigidity at the designed binding surface, which is likely important for affinity and specificity, is high compared to previous design studies. In designed anti-lysozyme antibodies, complementarity-determining regions (CDRs) at the periphery of the interface, such as L1 and H2, show greater backbone conformation diversity than the CDRs at the core of the interface, and increase the binding surface area compared to the natural antibody, potentially enhancing affinity and specificity. © 2015 Wiley Periodicals, Inc.

EFICIENCIA ENERGÉTICA POR LA UTILIZACIÓN DE COMPONENTES DE CONDUCCIÓN DE LUZ NATURAL EN CLIMA CÁLIDO-HÚMEDO | ENERGETIC EFFICIENCY DERIVED FROM THE USE OF CONDUCTION COMPONENTS OF DAYLIGHT IN WARM-HUMID CLIMATE

Directory of Open Access Journals (Sweden)

Rosalinda González Gómez

2015-11-01

Full Text Available The electric energy saving was estimated by the utilization of Conduction Components of Daylight (CCD in warm-humid climate. For this, the luminic performance of the component was determined, considering values of horizontal exterior lighting and interior lighting obtained by monitoring under real sky conditions in scale models, and the comparison with incandescent bulbs and Compact Fluorescent Lamps (CFL. The utilization of the natural light through CCLN allows to obtain a saving in the expense for energy, with respect to the use of Incandescent Bulb and/or Compact Fluorescent Lamp (artificial lighting. In this sense, their use would correspond to 219 KWh and to 54.75 KWh, respectively, if they are used for an average of 10 daily hours, during a period of one year. It was estimated that a possible reduction could be achieved in the electricity consumption, maintaining the comfort and quality of life of the users in buildings (high luminic performance without use of energy from commercial supplier, contributing this way to the "energy efficiency" in them.

The impact of changing solar screen rotation angle and its opening aspect ratios on Daylight Availability in residential desert buildings

KAUST Repository

Sherif, Ahmed H.; Sabry, Hanan M.; Gadelhak, Mahmoud I.

2012-01-01

usually used to diffuse and prevent direct solar penetration into spaces. This paper investigates the impact of changing solar screen axial rotation angle and screen opening aspect ratio on daylighting performance in a typical residential living room space

Daylight for energy-saving lamps. Recognizing with lighting sources free of charge; Tageslicht vor Energiesparlampen. Kostenlos verfuegbare Lichtquellen einplanen

Energy Technology Data Exchange (ETDEWEB)

David, Holger

2010-07-01

With saving energy in the lighting, politics, economics and private households set on compact fluorescent lamps, so called energy-saving lamps. A more economical and pollution free alternative is the increased use of daylight, which is free of charge and felt more pleasant by humans.

Multi-objective and multidisciplinary design optimization of large sports building envelopes : A case study

NARCIS (Netherlands)

Yang, D.; Sun, Y.; Turrin, M.; von Buelow, P.; Paul, J.C.

2015-01-01

Currently, in the conceptual envelope design of sports facilities, multiple engineering performance feedbacks (e.g. daylight, energy and structural performance) are expected to assist architectural design decision-making. In general, it is known as Building Performance Optimization in the conceptual

Daylight-mediated photodynamic therapy in Spain: advantages and disadvantages.

Science.gov (United States)

Pérez-Pérez, L; García-Gavín, J; Gilaberte, Y

2014-09-01

Photodynamic therapy (PDT) is an option for the treatment of actinic keratosis, Bowen disease, and certain types of basal cell carcinoma. It is also used to treat various other types of skin condition, including inflammatory and infectious disorders. The main disadvantages of PDT are the time it takes to administer (both for the patient and for health professionals) and the pain associated with treatment. Daylight-mediated PDT has recently been reported to be an alternative to the conventional approach. Several studies have shown it to be similar in efficacy to and better tolerated than classic PDT for the treatment of mild to moderate actinic keratosis. Nevertheless, most of these studies are from northern Europe, and no data have been reported from southern Europe. The present article reviews the main studies published to date, presents the treatment protocol, and summarizes our experience with a group of treated patients. Copyright © 2013 Elsevier España, S.L.U. y AEDV. All rights reserved.

Energy efficient lighting design for Venlo type greenhouses

NARCIS (Netherlands)

Janssen, E.; Zonneveldt, L.; Sools, F.

2006-01-01

TNO has developed a Radiance software model to calculate the light distribution in the greenhouse using raytracing methods, suitable for daylight and artificial lighting. The model is based on a 3D CAD (Computer aided design) model. The objective is to maximize the efficiency of the artificial

Nature-Inspired Design : Strategies for Sustainable Product Development

NARCIS (Netherlands)

De Pauw, I.C.

2015-01-01

Product designers can apply different strategies, methods, and tools for sustainable product development. Nature-Inspired Design Strategies (NIDS) offer designers a distinct class of strategies that use ‘nature’ as a guiding source of knowledge and inspiration for addressing sustainability.

Design guidelines for natural ventilation systems in tertiary sector buildings

OpenAIRE

Van Moeseke, Geoffrey; Bruyère, Isabelle; De Herde, André; CISBAT 2005: Renewables in a changing climate

2005-01-01

Parameters determining efficiency of natural ventilation systems are numerous. The most important are architecture and system design. This article get onto both but focuses on system design. Through dynamic simulations it shows that natural ventilation management has a large impact on energy saving but most of all on thermal comfort. Natural ventilation techniques are also weighted against hybrid solutions and high efficiency mechanical cooling solutions. Natural ventilation techniques show t...

Comparative Study of Two Daylighting Analysis Methods with Regard to Window Orientation and Interior Wall Reflectance

Directory of Open Access Journals (Sweden)

Yeo Beom Yoon

2014-09-01

Full Text Available The accuracy and speed of the daylighting analysis developed for use in EnergyPlus is better than its predecessors. In EnergyPlus, the detailed method uses the Split-flux algorithm whereas the DElight method uses the Radiosity algorithm. Many existing studies have addressed the two methods, either individually or compared with other daylight analysis methods like Ray tracing but still there is lack of detailed comparative study of these two methods. Our previous studies show that the Split-flux method overestimates the illuminance, especially for the areas away from the window. The Radiosity method has the advantage of accurately predicting this illuminance because of how it deals with the diffuse light. For this study, the EnergyPlus model, which has been calibrated using data measured in a real building in previous studies, has also been used. The calibrated model has a south oriented window only. This model is then used to analyze the interior illuminance inside the room for north, west and east orientation of the window by rotating the model and by changing the wall reflectance of the model with south oriented window. Direct and diffuse component of the illuminance as well as the algorithms have been compared for a detailed analysis.

Simulating the Daylight Performance of Complex Fenestration Systems Using Bidirectional Scattering Distribution Functions within Radiance

Energy Technology Data Exchange (ETDEWEB)

Ward, Gregory; Mistrick, Ph.D., Richard; Lee, Eleanor; McNeil, Andrew; Jonsson, Ph.D., Jacob

2011-01-21

We describe two methods which rely on bidirectional scattering distribution functions (BSDFs) to model the daylighting performance of complex fenestration systems (CFS), enabling greater flexibility and accuracy in evaluating arbitrary assemblies of glazing, shading, and other optically-complex coplanar window systems. Two tools within Radiance enable a) efficient annual performance evaluations of CFS, and b) accurate renderings of CFS despite the loss of spatial resolution associated with low-resolution BSDF datasets for inhomogeneous systems. Validation, accuracy, and limitations of the methods are discussed.

Experimental analysis on a 1:2 scale model of the double light pipe, an innovative technological device for daylight transmission

Energy Technology Data Exchange (ETDEWEB)

Baroncini, C.; Boccia, O.; Chella, F.; Zazzini, P. [D.S.S.A.R.R. Faculty of Architecture, University ' ' G. D' Annunzio' ' Viale Pindaro 42, 65127 Pescara (Italy)

2010-02-15

In this paper the authors present the double light pipe, an innovative technological device, designed as an evolution of a traditional light pipe, which distributes daylight to underground areas of a building, illuminating, at the same time, the passage areas thanks to a larger collector and a second transparent pipe attached to the first one. Unlike the traditional light pipe, thanks to this double illuminating function it can be located in the middle of a room, despite its encumbrance. In this paper the technological design of the double light pipe is presented and the results of an experimental analysis on a reduced scale (1:2) model are shown. Internal illuminance data over horizontal and vertical work-planes were measured in various sky conditions with or without direct solar radiation. Being this innovative device obtained by a light pipe integrated with a second pipe, it performs like a traditional light pipe for the final room and, at the same time, illuminates the intermediate room giving it uniform and high quality light, particularly indicated for wide plant areas, such as show-rooms or museums. (author)

Balancing the daylighting and energy performance of solar screens in residential desert buildings: Examination of screen axial rotation and opening aspect ratio

KAUST Repository

Sabry, Hanan; Sherif, Ahmed; Gadelhak, Mahmoud; Aly, Mohamed

2014-01-01

Solar screens are typically used to control solar access into building spaces. They proved their usefulness in improving the daylighting and energy performance of buildings in the hot arid desert environments which are endowed with abundance

Impact of daylight saving time on road traffic collision risk: a systematic review.

Science.gov (United States)

Carey, Rachel N; Sarma, Kiran M

2017-07-02

Bills have been put forward in the UK and Republic of Ireland proposing a move to Central European Time (CET). Proponents argue that such a change will have benefits for road safety, with daylight being shifted from the morning, when collision risk is lower, to the evening, when risk is higher. Studies examining the impact of daylight saving time (DST) on road traffic collision risk can help inform the debate on the potential road safety benefits of a move to CET. The objective of this systematic review was to examine the impact of DST on collision risk. Major electronic databases were searched, with no restrictions as to date of publication (the last search was performed in January 2017). Access to unpublished reports was requested through an international expert group. Studies that provided a quantitative analysis of the effect of DST on road safety-related outcomes were included. The primary outcomes of interest were road traffic collisions, injuries and fatalities. Twenty-four studies met the inclusion criteria. Seventeen examined the short-term impact of transitions around DST and 12 examined long-term effects. Findings from the short-term studies were inconsistent. The long-term findings suggested a positive effect of DST. However, this cannot be attributed solely to DST, as a range of road collision risk factors vary over time. The evidence from this review cannot support or refute the assertion that a permanent shift in light from morning to evening will have a road safety benefit. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Effect of internal woven roller shade and glazing on the energy and daylighting performances of an office building in the cold climate of Shillong

International Nuclear Information System (INIS)

Singh, Ramkishore; Lazarus, I.J.; Kishore, V.V.N.

2015-01-01

Highlights: • We simulated a number of glazing and interior roller shade alternatives. • Office room has been simulated for three window-to-wall ratios in a cold climate. • Daylighting and energy performances have been assessed for each alternative. • Maximum energy savings have been estimated in the office with a 30% glazed area. • Energy saving decreases for larger glazed area and fabric transmittance. - Abstract: The energy and visual performances of the façades are defined by many parameters including façade size, properties of glazings and shadings, and their arrangements as well as control strategies. In this study, a number of combinations of internal woven roller shades and four double glazings have been proposed and assessed in integrated manner in order to improve the energy efficiency and visual comfort in new or existing office buildings. Office rooms facing south, east, north and west have been simulated for cold climate, by varying glazed areas and proposed glazing and shading alternatives. Results have been calculated, compared and analyzed in terms of the energy consumptions, energy saving potentials, daylight autonomy, useful daylight illuminance and discomfort glare free time, for each of the combinations. Simulation results show that the choice of glazing and shading alternatives can have substantial impact on energy and visual performances of the office space. Regardless of façade orientation, the maximum energy saving is achieved for a window-to-wall ratio (WWR) of 30%. Saving potential decreases significantly for larger glazed area and for each façade orientation. For all façade orientations and glazed areas (except for 30% WWR in the north wall), a bare low-e coated double glazing (U = 1.616 W/m"2 K, SHGC = 0.209, τ_v = 0.301) is found to be the most energy efficient choice. For 30% north glazing, the energy efficiency can be maximized with a different bare low-e coated double glazing (U = 1.628 W/m"2 K, SHGC = 0.370, τ_v = 0

Design Principles for Natural and Hybrid Ventilation

OpenAIRE

Heiselberg, Per

2000-01-01

For many years mechanical and natural ventilation systems have developed separately. Naturally, the next step in this development is the development of ventilation concepts that utilize and combine the best features from each system to create a new type of ventilation system- Hybrid Ventilation. The hybrid ventilation concepts, design challenges and principles are discussed and illustrated by four building examples.

Zion National Park Visitor Center: Significant Energy Savings Achieved through a Whole-Building Design Process: Preprint

Energy Technology Data Exchange (ETDEWEB)

Torcellini, P.; Judkoff, R.; Hayter, S.

2002-07-01

The National Park Service (NPS) applied a whole-building design process developed at the National Renewable Energy Laboratory (NREL) to create a building that performs more than 70% better than a comparable code-compliant building at no additional construction cost. This whole-building design process involves a committed design team, including the energy consultant, in the earliest conceptual design phase and continues through building commissioning. The design team for this project included the architect, engineer, energy consultant, landscape architect, owner, operator, and others who could influence the building design and operation. Extensive whole-building energy and lighting computer simulations were conducted throughout the process, which included the integration of energy efficient and renewable energy technologies into the building. The design team, inspired by natural cooling within the canyon, developed simple solutions to create an extremely energy efficient building. The se strategies included natural ventilation cooling, cooltowers for evaporative cooling without distribution fans, daylighting, massive building materials, Trombe walls and direct solar gains for heating, engineered window overhangs for solar load control, a building automation system to maintain comfort and control the energy-efficient lighting system, and a roof-mounted photovoltaic system to offset building electrical loads and ensure a power supply during the frequent utility grid outages.

Design Principles for Natural and Hybrid Ventilation

DEFF Research Database (Denmark)

Heiselberg, Per

For many years mechanical and natural ventilation systems have developed separately. Naturally, the next step in this development is the development of ventilation concepts that utilize and combine the best features from each system to create a new type of ventilation system- Hybrid Ventilation. ....... The hybrid ventilation concepts, design challenges and principles are discussed and illustrated by four building examples.......For many years mechanical and natural ventilation systems have developed separately. Naturally, the next step in this development is the development of ventilation concepts that utilize and combine the best features from each system to create a new type of ventilation system- Hybrid Ventilation...

The Nature and Design of Post-Industrial Organizations

OpenAIRE

George P. Huber

1984-01-01

This paper describes the nature and design of post-industrial organizations. It begins with an assessment of the popular literature on post-industrial society, and finds that this literature is an inappropriate basis for inferring the nature of post-industrial organizations. Partly as a consequence of this finding, the paper turns to systems theory as a basis for determining both the nature of post-industrial society and the nature of the increased demands that this environment would impose o...

Daylight photocatalysis performance of biomorphic CeO2 hollow fibers prepared with lens cleaning paper as biotemplate

International Nuclear Information System (INIS)

Qian, Junchao; Chen, Feng; Wang, Fang; Zhao, Xiaobing; Chen, Zhigang

2012-01-01

Highlights: ► A novel, simple and eco-friendly approach for hierarchical, biomorphic CeO 2 hollow fibers with mesoporous tube walls is presented by using paper as template. ► The biomorphic CeO 2 fibers was composed of nanosheets with bimodal pore-size mesoporous distribution and exhibited high light-harvesting under sunlight irradiation. ► The CeO 2 microfibers biomimicking the natural plant structures have promising application for photodegradation of organic pollutants in water. -- Abstract: Hierarchical, biomorphic CeO 2 hollow fibers with mesoporous tube walls have been fabricated using lens cleaning paper as biotemplates. After sintered at 550 °C in air, the cellulosic fibers of paper were converted into micro-tubes composing of CeO 2 crystallites with grain size about 8 nm. The photocatalytic activity of the CeO 2 fibers was evaluated by photodegradation efficiency of methylene blue in aqueous solution under daylight irradiation. The characterized results show that the CeO 2 fibers faithfully replicated micro-fibrous structure derived from original template and possessed dramatic enhanced photocatalytic activity compared with bulk CeO 2 . This simple biotemplate method provides a cost-effective and eco-friendly route to obtain high performance photocatalysts.

Passive Design Strategies to Enhance Natural Ventilation in Buildings "Election of Passive Design Strategies to Achieve Natural Ventilation in Iraqi Urban Environment with Hot Arid Climate"

Directory of Open Access Journals (Sweden)

Ghada M.Ismael Abdul Razzaq Kamoona

2016-06-01

Full Text Available the natural ventilation in buildings is one of effective strategies for achieving energy efficiency in buildings by employing methods and ways of passive design, as well as its efficiency in providing high ranges of thermal comfort for occupants in buildings and raises their productivity. Because the concept of natural ventilation for many people confined to achieve through the windows and openings only, become necessary to provide this research to demonstrate the various passive design strategies for natural ventilation. Then, research problem: Insufficient knowledge about the importance and mechanism of the application of passive design strategies for natural ventilation in buildings. The research objective is: Analysis of passive design strategies to achieve natural ventilation in buildings, for the purpose of the proper selection of them to Iraqi urban environment. Accordingly, the research included two parts: First, the theoretical part, which dealt with the conceptual framework of natural ventilation and deriving the most important aspects in it, in order to adopted as a base for the practical part of the research. Second: the practical part, which analyzed examples of buildings projects that employed various design strategies for natural ventilation, according to the theoretical framework that has been drawn. The main conclusion is, Necessity to adopt various passive design strategies for natural ventilation in Iraqi urban environment with hot dry climate, as they have a significant impact in reducing the energy consumption for the purposes of ventilation and cooling, as well as for its efficiency in improving air quality in indoor environments of buildings.

Combination of ablative fractional laser and daylight-mediated photodynamic therapy for actinic keratosis in organ transplant recipients – a randomized controlled trial

DEFF Research Database (Denmark)

Togsverd-Bo, Katrine; Lei, Ulrikke; Erlendsson, A M

2015-01-01

BACKGROUND: Topical photodynamic therapy (PDT) for actinic keratoses (AK) is hampered by pain during illumination and inferior efficacy in organ-transplant recipients (OTR). OBJECTIVES: We assessed ablative fractional laser (AFL)-assisted daylight photodynamic therapy (PDT) (AFL-dPDT) compared...

A study on the performance enhancement of low-temperature solar applications : Daylighting and Adsorption Desalination System

Energy Technology Data Exchange (ETDEWEB)

Kim, Yeong Min

2011-02-15

Thermal applications of solar energy are categorized by low, medium and high temperature. The present study has explored two major applications of solar energy widely researched and practiced these days. Of these, one deals with the utilization of solar energy for lighting in buildings, which is responsible for a great portion of electricity consumption, especially, for office and public buildings. Rapid improvements in lighting technology harnessing solar energy (daylight) have greatly contributed to radically reduce its consumption levels - and thereby reduce CO{sub 2} emissions and cost. The other case considered here for solar utilization is so-called solar desalination using adsorbents (silica gels). This technology utilizes a silica gel adsorbent (desiccant) as a medium between an evaporator and a condenser to reject and facilitate latent heat of vaporization. Vapour is adsorbed and desorbed between evaporation and condensation phases. 1. Daylighting simulation A lighting upgrade is an obvious step toward improving a building's energy consumption, which could be easily assessed by using computer simulations. The present study has carried out a series of computer simulations for a lightless space as well as an actual classroom (in Jeju National University) when sun pipe systems are installed. They were first modeled by ECOTECT before RADIANCE was called in to conduct lighting analysis. Simulations were performed for equinoxes and solstices when the sun is at its highest altitude, i.e. at noon (12 PM). A lightless space and classroom of the same dimensions revealed the effectiveness of sun pipe systems to improve indoor lighting conditions throughout the year. 2. Development of adsorption desalination system utilizing silica-gel Some major components of an adsorption desalination system were designed and fabricated to assess its desalination efficiency when packs of silica-gel were used at different operating conditions. The amount of fresh water yield was

A study on the performance enhancement of low-temperature solar applications : Daylighting and Adsorption Desalination System

International Nuclear Information System (INIS)

Kim, Yeong Min

2011-02-01

Thermal applications of solar energy are categorized by low, medium and high temperature. The present study has explored two major applications of solar energy widely researched and practiced these days. Of these, one deals with the utilization of solar energy for lighting in buildings, which is responsible for a great portion of electricity consumption, especially, for office and public buildings. Rapid improvements in lighting technology harnessing solar energy (daylight) have greatly contributed to radically reduce its consumption levels - and thereby reduce CO 2 emissions and cost. The other case considered here for solar utilization is so-called solar desalination using adsorbents (silica gels). This technology utilizes a silica gel adsorbent (desiccant) as a medium between an evaporator and a condenser to reject and facilitate latent heat of vaporization. Vapour is adsorbed and desorbed between evaporation and condensation phases. 1. Daylighting simulation A lighting upgrade is an obvious step toward improving a building's energy consumption, which could be easily assessed by using computer simulations. The present study has carried out a series of computer simulations for a lightless space as well as an actual classroom (in Jeju National University) when sun pipe systems are installed. They were first modeled by ECOTECT before RADIANCE was called in to conduct lighting analysis. Simulations were performed for equinoxes and solstices when the sun is at its highest altitude, i.e. at noon (12 PM). A lightless space and classroom of the same dimensions revealed the effectiveness of sun pipe systems to improve indoor lighting conditions throughout the year. 2. Development of adsorption desalination system utilizing silica-gel Some major components of an adsorption desalination system were designed and fabricated to assess its desalination efficiency when packs of silica-gel were used at different operating conditions. The amount of fresh water yield was studied

Continuous ultra-low-intensity artificial daylight is not as effective as red LED light in photodynamic therapy of multiple actinic keratoses

DEFF Research Database (Denmark)

Wiegell, Stine Regin; Heydenreich, Jakob; Fabricius, Susanne

2011-01-01

Daylight-mediated photodynamic therapy (PDT) is a simple and tolerable treatment of nonmelanoma skin cancer. It is of interest which light intensity is sufficient to prevent accumulation of protoporphyrin IX (PpIX) and effectively treat actinic keratoses (AKs). We compared the efficacy of PDT...

Application of Surrogate Models for Building Envelope Design Exploration and Optimization

NARCIS (Netherlands)

Yang, D.; Šileryte, R.; D'Aquilio, A.; Turrin, M.; Attar, Ramtin; Chronis, Angelos; Hanna, Sean; Turrin, Michela

2016-01-01

Building performance simulations are usually timeconsuming. They may account for the major portion of time spent in Computational Design Optimization (CDO), for instance, annual hourly daylight and energy simulations. In this case, the optimization may become less efficient or even infeasible within

The constructal law of design and evolution in nature

Science.gov (United States)

Bejan, Adrian; Lorente, Sylvie

2010-01-01

Constructal theory is the view that (i) the generation of images of design (pattern, rhythm) in nature is a phenomenon of physics and (ii) this phenomenon is covered by a principle (the constructal law): ‘for a finite-size flow system to persist in time (to live) it must evolve such that it provides greater and greater access to the currents that flow through it’. This law is about the necessity of design to occur, and about the time direction of the phenomenon: the tape of the design evolution ‘movie’ runs such that existing configurations are replaced by globally easier flowing configurations. The constructal law has two useful sides: the prediction of natural phenomena and the strategic engineering of novel architectures, based on the constructal law, i.e. not by mimicking nature. We show that the emergence of scaling laws in inanimate (geophysical) flow systems is the same phenomenon as the emergence of allometric laws in animate (biological) flow systems. Examples are lung design, animal locomotion, vegetation, river basins, turbulent flow structure, self-lubrication and natural multi-scale porous media. This article outlines the place of the constructal law as a self-standing law in physics, which covers all the ad hoc (and contradictory) statements of optimality such as minimum entropy generation, maximum entropy generation, minimum flow resistance, maximum flow resistance, minimum time, minimum weight, uniform maximum stresses and characteristic organ sizes. Nature is configured to flow and move as a conglomerate of ‘engine and brake’ designs. PMID:20368252

Students' Perception of Daylight Illumination in the School Workshop as a Determinant for Effective Students' Task Performance in Workshop Practice

Science.gov (United States)

Amasuomo, Japo Oweikeye Morto; Alio, Abigail Ngozi

2013-01-01

The study investigated daylight illumination in the school workshop as a determinant for effective students' task performance in workshop practice. 183 NCE Technical students in 300 Level which comprised of 73 and 112 students from Federal Colleges of Education (Technical), Asaba and Omoku, Nigeria respectively during the 2008/2009 academic…

Solar Design Workbook

Energy Technology Data Exchange (ETDEWEB)

Franta, G.; Baylin, F.; Crowther, R.; Dubin, F.; Grace, A., Griffith, J.W.; Holtz, M.; Kutscher, C.; Nordham, D.; Selkowitz, S.; Villecco, M.

1981-06-01

This Solar Design Workbook presents solar building design applications for commercial buildir^s. The book is divided into four sections. The first section describes the variety of solar applications in buildings including conservation aspects, solar fundamentals, passive systems, active systems, daylighting, and other solar options. Solar system design evaluation techniques including considerations for building energy requirements, passive systems, active systems, and economics are presented in Section II. The third section attempts to assist the designer in the building design process for energy conservation and solar applications including options and considerations for pre-design, design, and post-design phases. The information required for the solar design proee^ has not been fully developed at this time. Therefore, Section III is incomplete, but an overview of the considerations with some of the design proces elements is presented. Section IV illustrates ease studies that utilize solar applications in the building design.

Cloud and radiance measurements with the VIS/NIR Daylight Whole Sky Imager at Lindenberg (Germany)

Energy Technology Data Exchange (ETDEWEB)

Feister, U. [Deutscher Wetterdienst, Meteorologisches Observatorium Lindenberg (Germany); Shields, J. [Scripps Inst. of Oceanography, Univ. of California, San Diego (United States)

2005-10-01

Ground-based cloud data acquired with the whole sky imager (WSI) are analyzed in relation to measurements of solar radiation performed at the Lindenberg Meteorological Observatory. Cloud fractions derived by the cloud detection algorithm from WSI images acquired during daylight hours between 2002 and 2004 are compared with conventional cloud observations for the two sites Potsdam and Lindenberg, and also with ceilometer data of cloud-base heights at Lindenberg. The comparison statistics are discussed in the context of different principles of measurement. A few case studies illustrate the strong scattering effect of clouds on solar radiance and irradiance measured at the ground in different spectral regions. Particularly clouds close to the apparent position of the sun lead to strong enhancements of solar diffuse irradiance incident on horizontal planes and hemispheres that substantially exceed corresponding clear-sky values. Irradiances derived from WSI sky radiance fields are shown in comparison to pyranometer data of diffuse irradiance and radiative transfer model calculations performed for clear sky conditions. Examples of spectral sky radiances with moving contrails illustrate the significant enhancement the contrails have compared to clear sky, even though they may have a relatively small direct effect on global irradiance values. As contrails are observed at Lindenberg for about 18 to 19% of daylight hours, and part of them become clouds, the indirect impact of these changes on solar irradiance received at the ground may not be negligible. (orig.)

Window Material Daylighting Performance Assessment Algorithm: Comparing Radiosity and Split-Flux Methods

Directory of Open Access Journals (Sweden)

Yeo Beom Yoon

2014-04-01

Full Text Available Windows are the primary aperture to introduce solar radiation to the interior space of a building. This experiment explores the use of EnergyPlus software for analyzing the illuminance level on the floor of a room with reference to its distance from the window. For this experiment, a double clear glass window has been used. The preliminary modelling in EnergyPlus showed a consistent result with the experimentally monitored data in real time. EnergyPlus has two mainly used daylighting algorithms: DElight method employing radiosity technique and Detailed method employing split-flux technique. Further analysis for illuminance using DElight and Detailed methods showed significant difference in the results. Finally, we compared the algorithms of the two analysis methods in EnergyPlus.

The daylight saving time in Mexico; El cambio de horario durante la epoca del verano en Mexico

Energy Technology Data Exchange (ETDEWEB)

Covarrubias Ramos, Rogelio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

The daylight saving time in Mexico for energy saving is analyzed; such a change is made forwarding the clocks one hour in all Mexico the first Sunday of April and backing them an hour the last Sunday of October. Mention is made the reasons why Mexico adopted this measure, the social-economic impact that brings along and the benefits of this daylight saving time. The case of countries that also apply this measure is analyzed. It is expected that this measure attains benefits for the society either collectively or individually through the ecology and the economy. [Espanol] Se analiza el cambio de horario en la epoca de verano en Mexico para ahorrar energia; dicho cambio se realiza al adelantar una hora al reloj en todo el territorio de Mexico el primer domingo de abril y retrazarlo una hora el ultimo domingo de octubre. Se mencionan las razones por las cuales Mexico adopto esta medida, el impacto socio-economico que traera consigo y los beneficios del cambio de horario. Se aborda la situacion de los paises que tambien aplican esta medida. Se espera que esta medida logre beneficios para la sociedad, ya sea en modo colectivo o individual, para la ecologia y para la economia.

The daylight saving time in Mexico; El cambio de horario durante la epoca del verano en Mexico

Energy Technology Data Exchange (ETDEWEB)

Covarrubias Ramos, Rogelio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The daylight saving time in Mexico for energy saving is analyzed; such a change is made forwarding the clocks one hour in all Mexico the first Sunday of April and backing them an hour the last Sunday of October. Mention is made the reasons why Mexico adopted this measure, the social-economic impact that brings along and the benefits of this daylight saving time. The case of countries that also apply this measure is analyzed. It is expected that this measure attains benefits for the society either collectively or individually through the ecology and the economy. [Espanol] Se analiza el cambio de horario en la epoca de verano en Mexico para ahorrar energia; dicho cambio se realiza al adelantar una hora al reloj en todo el territorio de Mexico el primer domingo de abril y retrazarlo una hora el ultimo domingo de octubre. Se mencionan las razones por las cuales Mexico adopto esta medida, el impacto socio-economico que traera consigo y los beneficios del cambio de horario. Se aborda la situacion de los paises que tambien aplican esta medida. Se espera que esta medida logre beneficios para la sociedad, ya sea en modo colectivo o individual, para la ecologia y para la economia.

Performance-Oriented Design of Large Passive Solar Roofs : A method for the integration of parametric modelling and genetic algorithms

NARCIS (Netherlands)

Turrin, M.; Von Buelow, P.; Stouffs, R.M.F.; Kilian, A.

2010-01-01

The paper addresses the design of large roof structures for semi outdoor spaces through an investigation of a type of performance-oriented design, which aims at integrating performance evaluations in the early stages of the design process. Particularly, aiming at improving daylight and thermal

Passive solar design studies for non-domestic buildings. Case studies

Energy Technology Data Exchange (ETDEWEB)

1988-01-01

Of the passive solar designs reported, those for a light industrial building, a nurses hostel and a low rise office block were considered to be clearly cost effective. A retrofit study of a secondary school showed that incorporating passive solar measures into refurbishment could be cost effective. Designs for a sports hall and medium rise office block were considered to be only marginally cost effective and those for a hotel bedroom block and DIY superstore were judged not to be cost effective. The maximization of daylight penetration coupled with controls on the lighting systems produced the main energy saving. This orientation, built form, fenestration, window shape, perimeter (and overhead) daylight and atria were primary solar features. Direct gain considered in conjunction with building weight/response factor could contribute to a lesser degree. Trombe walls were shown to be generally uneconomic for this type of building and conservatories contributed to amenity value more than to savings.

Design and testing of a mesocosm-scale habitat for culturing the endangered Devils Hole Pupfish

Science.gov (United States)

Feuerbacher, Olin; Bonar, Scott A.; Barrett, Paul J.

2016-01-01

aptive propagation of desert spring fishes, whether for conservation or research, is often difficult, given the unique and often challenging environments these fish utilize in nature. High temperatures, low dissolved oxygen, minimal water flow, and highly variable lighting are some conditions a researcher might need to recreate to simulate their natural environments. Here we describe a mesocosm-scale habitat created to maintain hybrid Devils Hole × Ash Meadows Amargosa Pupfish (Cyprinodon diabolis × C. nevadensis mionectes) under conditions similar to those found in Devils Hole, Nevada. This 13,000-L system utilized flow control and natural processes to maintain these conditions rather than utilizing complex and expensive automation. We designed a rotating solar collector to control natural sunlight, a biological reactor to consume oxygen while buffering water quality, and a reverse-daylight photosynthesis sump system to stabilize nighttime pH and swings in dissolved oxygen levels. This system successfully controlled many desired parameters and helped inform development of a larger, more permanent desert fish conservation facility at the U.S. Fish and Wildlife Service’s Ash Meadows National Wildlife Refuge, Nevada. For others who need to raise fish from unique habitats, many components of the scalable and modular design of this system can be adapted at reasonable cost.

Photodynamic therapy of actinic keratoses with 8% and 16% methyl aminolaevulinate and home-based daylight exposure: a double-blinded randomized clinical trial

DEFF Research Database (Denmark)

Wiegell, S.R.; Haedersdal, M.; Eriksen, P.

2009-01-01

Background Photodynamic therapy (PDT) is an effective but time-consuming and often painful treatment for actinic keratosis (AK). Home-based daylight-PDT has the potential to facilitate treatment procedure and to reduce associated pain due to continuous activation of small amounts of porphyrins...

Architectural design of an advanced naturally ventilated building form

Energy Technology Data Exchange (ETDEWEB)

Lomas, K.J. [De Montfort University, Leicester (United Kingdom). Institute of Energy and Sustainable Development

2007-02-15

Advanced stack-ventilated buildings have the potential to consume much less energy for space conditioning than typical mechanically ventilated or air-conditioned buildings. This paper describes how environmental design considerations in general, and ventilation considerations in particular, shape the architecture of advanced naturally ventilated (ANV) buildings. The attributes of simple and advanced naturally ventilated buildings are described and a taxonomy of ANV buildings presented. Simple equations for use at the preliminary design stage are presented. These produce target structural cross section areas for the key components of ANV systems. The equations have been developed through practice-based research to design three large educational buildings: the Frederick Lanchester Library, Coventry, UK; the School of Slavonic and East European Studies, London, UK; the Harm A. Weber Library, Elgin, near Chicago, USA. These buildings are briefly described and the sizes of the as-built ANV features compared with the target values for use in preliminary design. The three buildings represent successive evolutionary stages: from advanced natural ventilation, to ANV with passive downdraught cooling, and finally ANV with HVAC support. Hopefully the guidance, simple calculation tools and case study examples will give architects and environmental design consultants confidence to embark on the design of ANV buildings. (author)

Canister storage building natural phenomena design loads

International Nuclear Information System (INIS)

Tallman, A.M.

1996-02-01

This document presents natural phenomena hazard (NPH) loads for use in the design and construction of the Canister Storage Building (CSB), which will be located in the 200 East Area of the Hanford Site

Analysis of impact of daylight time savings on energy use of buildings in Kuwait

Energy Technology Data Exchange (ETDEWEB)

Krarti, Moncef, E-mail: moncef.krarti@colorado.ed [CEAE Department, CB 428, University of Colorado, Boulder, CO 80309 (United States); Hajiah, Ali [Kuwait Institute for Scientific Research, Safat (Kuwait)

2011-05-15

In this paper, a detailed simulation-based analysis is conducted to assess the impact of adopting Daylight Saving Time (DST) on the electrical energy use and peak demand in Kuwait. The analysis focused on the impact of DST in the building sector since it represents 90% of electrical energy usage of Kuwait. The simulation results indicate that the adoption of DST has mixed impacts for Kuwait. While the commercial and the governmental sectors may benefit from the DST, the private residences and apartment buildings can see both their annual energy use and peak demand increase slightly by adopting DST. The overall impact of the DST implementation is rather minimal with a slight increase energy use of about 0.07% and a slight reduction in peak demand of 0.14% or about 12 MW based on 2005 electrical peak demand for Kuwait. - Research highlights: {yields} A detailed simulation-based analysis is conducted to assess the impact of adopting Daylight Saving Time (DST) on the electrical energy use and peak demand in Kuwait. {yields} The analysis focused on the impact of DST in the building sector since it represents 90% of electrical energy usage of Kuwait. {yields} It is found that while the commercial and the governmental building sectors may benefit from DST, the private residences and apartment buildings can see both their annual energy use and peak demand increase slightly by adopting DST. {yields} Since the residential sector represents the majority of the electrical load in Kuwait, DST adoption was found to cause slight increase in annual electrical energy use by about 0.07% and a slight reduction in electrical peak electrical demand by about 0.14%.

Analysis of impact of daylight time savings on energy use of buildings in Kuwait

International Nuclear Information System (INIS)

Krarti, Moncef; Hajiah, Ali

2011-01-01

In this paper, a detailed simulation-based analysis is conducted to assess the impact of adopting Daylight Saving Time (DST) on the electrical energy use and peak demand in Kuwait. The analysis focused on the impact of DST in the building sector since it represents 90% of electrical energy usage of Kuwait. The simulation results indicate that the adoption of DST has mixed impacts for Kuwait. While the commercial and the governmental sectors may benefit from the DST, the private residences and apartment buildings can see both their annual energy use and peak demand increase slightly by adopting DST. The overall impact of the DST implementation is rather minimal with a slight increase energy use of about 0.07% and a slight reduction in peak demand of 0.14% or about 12 MW based on 2005 electrical peak demand for Kuwait. - Research highlights: → A detailed simulation-based analysis is conducted to assess the impact of adopting Daylight Saving Time (DST) on the electrical energy use and peak demand in Kuwait. → The analysis focused on the impact of DST in the building sector since it represents 90% of electrical energy usage of Kuwait. → It is found that while the commercial and the governmental building sectors may benefit from DST, the private residences and apartment buildings can see both their annual energy use and peak demand increase slightly by adopting DST. → Since the residential sector represents the majority of the electrical load in Kuwait, DST adoption was found to cause slight increase in annual electrical energy use by about 0.07% and a slight reduction in electrical peak electrical demand by about 0.14%.

Evening daylight may cause adolescents to sleep less in spring than in winter

Science.gov (United States)

Figueiro, Mariana G.; Rea, Mark S.

2012-01-01

Sleep restriction commonly experienced by adolescents can stem from greater sleep pressure by the homeostatic processes and from phase delays of the circadian system. With regard to the latter potential cause, we hypothesized that because there is more natural evening light during the spring than winter, a sample of adolescent students would be more phase delayed in spring than in winter, would have later sleep onset times and, because of fixed school schedules, would have shorter sleep durations. Sixteen eighth-grade subjects were recruited for the study. We collected sleep logs and saliva samples to determine their dim light melatonin onset (DLMO), a well-established circadian marker. Actual circadian light exposures experienced by a subset of twelve subjects over the course of seven days in winter and in spring using a personal, head-worn, circadian light measurement device are also reported here. Results showed that this sample of adolescents was exposed to significantly more circadian light in spring than in winter, especially in the evening hours when light exposure would likely delay circadian phase. Consistent with the light data, DLMO and sleep onset times were significantly more delayed, and sleep durations were significantly shorter in spring than in winter. The present ecological study of light, circadian phase, and self-reported sleep suggests that greater access to evening daylight in the spring may lead to sleep restriction in adolescents while attending school. Therefore, lighting schemes that reduce evening light in the spring may encourage longer sleep times in adolescents. PMID:20653452

Daylight photodynamic therapy with methyl aminolevulinate cream as a convenient, similarly effective, nearly painless alternative to conventional photodynamic therapy in actinic keratosis treatment

DEFF Research Database (Denmark)

Rubel, D M; Spelman, L; Murrell, D F

2014-01-01

BACKGROUND: Daylight photodynamic therapy (DL-PDT) of actinic keratosis (AK) has shown preliminary efficacy and safety results comparable to conventional photodynamic therapy (c-PDT), using methyl aminolevulinate (MAL) cream. OBJECTIVES: To demonstrate the efficacy and safety of DL-PDT vs. c...

Argument from Design in Richard Baxter's Natural Theology

Directory of Open Access Journals (Sweden)

Igor Koshelev

2017-12-01

Full Text Available The article deals with the teleological argument, or argument from design, as expounded by a famous English Protestant theologian Richard Baxter, one of the leading 17-th century English Puritans, in his work “The Reasons of the Christian Religion”. Natural theology, providing arguments for the existence of God based on reason and without appeal to the Revelation, has always played a vital role throughout the entire history of theological thought. The most popular was the so called teleological argument, or the argument from design, which stands out among all rational arguments for the existence of the Creator. It is mostly known from the “Fifth Way” of the medieval Scholastic philosopher Thomas Aquinas and a famous work “Natural Theology” by an English 19-th century theologian William Paley. The foundation for the modern research in the area was laid during the age of the Scientific Revolution of the 17th century English nature philosophers and theologians, especially Robert Boyle, who believed the teleological argument to be the key element of Natural Theology. His friend and confessor, Richard Baxter, a prominent representative of the Puritan Natural Theology, mostly known by his theological works, paved the way for Natural Theology both in his own time and the following centuries. His work was thought to be the best collection of the evidences for Christianity.

US Department of Energy natural phenomena design/evaluation guidelines/lessons learned

International Nuclear Information System (INIS)

Conrads, T.J.

1991-08-01

In the spring of 1988, DOE Order 6430.1A, General Design Criteria [1], was issued for use. This document references UCRL-15910, Design and Evaluation Guidelines for DOE Facilities Subjected to Natural Phenomena Hazards [2], which is to be used as the basis for the design and evaluation of new and existing facilities to natural phenomena loading. Rather than use the historical deterministic methods for computing structural and component loading from potential natural phenomena, UCRL-15910 incorporated the years of hazards studies conducted throughout the US Department of Energy complex into probabilistic-based methods. This paper describes the process used to incorporate US Department of Energy natural phenomena design guidelines into the Hanford Plant Standards -- Standard Design Criteria for Architectural and Civil Standards [3]. It also addresses the subsequent use of these criteria during structural assessments of facilities, systems, and components of various vintage in support of updating safety analysis reports. The paper includes comparison of results using these most recent probabilistic-based natural phenomena loading criteria to those obtained from previous assessments, and it addresses the lessons learned from the many structural evaluations of 1940--1960 vintage buildings

A modified model for estimation of daylight factor for skylight integrated with dome roof structure of mud-house in New Delhi (India)

Energy Technology Data Exchange (ETDEWEB)

Chel, Arvind; Tiwari, G.N.; Singh, H.N. [Centre for Energy Studies (CES), Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110 016 (India)

2010-10-15

The daylight factor model given by Charted Institute of Building Services Engineers (CIBSE) was modified in this paper to incorporate time variations with respect to zenith angle ({theta}{sub z}) and vertical height (h) of working surface above ground surface which was normalized with central height (H) of skylight dome. The modified model contains constant exponents which are determined using linear regression analysis based on hourly experimental data of inside and outside illuminance for each month of the year 2007-2008. The prediction of modified model is found in good agreement with experimental observed inside illuminance data on the basis of values of root mean square percentage error (e) and correlation coefficient (r). The annual average daylight factor values for big and small dome skylight rooms are determined as 2.3% and 4.4% respectively. The energy saving potential of skylight rooms for selected climatic locations in India is also presented in this paper. (author)

Marian E. Koshland Integrated Natural Science Center at Haverford College, Haverford, Pennsylvania

Energy Technology Data Exchange (ETDEWEB)

2005-06-01

This publication is one a in series of case studies for ''Laboratories for the 21st Century,'' a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy. It is geared toward architects and engineers who are familiar with laboratory buildings, and encourages the design, construction, and operation of safe, sustainable, high-performance laboratories. Featured technologies of this laboratory include fume hoods, controls, mechanical systems, electrical loads, sustainable design/planning, and daylighting.

Energy optimised lighting in buildings with simultaneous improvement of quality of life by daylight utilisation and innovative lamps and ballast techniques; Energieoptimierte Beleuchtung bei gleichzeitiger Verbesserung der Lebensqualitaet durch Nutzung von Tageslicht und neuer Lampen- und Vorschalttechnik

Energy Technology Data Exchange (ETDEWEB)

Kaase, Heinrich; Aydinli, Sirri; Gramm, Stefan; Thiel, Stefan [Technische Universitaet Berlin, Fakultaet IV Elektrotechnik und Informatik, FG Lichttechnik, Berlin (Germany); De Boer, Jan; Erhorn, Hans [Fraunhofer-Institut fuer Bauphysik, Stuttgart (Germany); Kuhn, Tilman; Wienold, Jan [Fraunhofer-Institut fuer Solare Energiesysteme, Freiburg (Germany); Hillmann, Gustav; Korolkow, Margarethe [IBUS GmbH, Berlin (Germany); Piazena, Helmut [Universitaetsklinikum Charite, Berlin (Germany)

2012-06-15

The scientific and technical goals of this project were developed in five parts. The individual topics arising from current issues, they still have a generally applicable nature. The consortium has worked on the following subprojects: (1) Development of a measurement technique to determine energy and photometric key figures of daylight components with a round robin test with three institutes. (2) Implementation of a detailed evaluation and documentation process for daylighting of interior spaces in different climate zones. (3) For lighting control in private living areas a ''Power Line Carrier Communication'' system has been evaluated and the advantages of a wireless transmission system were identified. (4) In a home for elderly quantitative studies on the well-being, for the fulfillment of visual tasks and the capability of melatonin suppression at different scenarios of general lighting with two different color temperatures of lamps (''warm white'' with TCP = 3000 K and ''cold white daylight'' with TCP = 6500 K) and vertical illuminance at the eyes of the subjects between 100 lx and 700 lx were performed. (5) For two school buildings in Berlin, the final energy consumption of the existing lighting system, the reference building and a re-planning were determined. It became clear in both examples that the existing lighting system exceeds the permitted value (EnEV 2009) by far. A good redesign, however, can be significantly less than the maximum allowed value. These studies were accompanied by a one-year monitoring of energy consumption. A cross-sectional analysis of 48 schools with a total of 86 buildings shows a substantial need for renovation of school buildings that were built before 1990.

Integrated Building Design

DEFF Research Database (Denmark)

Heiselberg, Per

In the first half of the 20th century, HVAC systems and artificial lighting were developed to meet indoor comfort needs. Before the introduction of mechanical systems, climate - not building style or appearance - was the major determinant of building form. Comfort was achieved through passive means...... and architectural features built into the design. However, with the advent of new technologies, architects were no longer constrained by the need to ensure that buildings had ample daylighting, remained airy and cool in the summer and warm in the winter. Since HVAC systems and artificial lighting could satisfy...

Analysis and design of Fuel Cycle Plant for natural phenomena hazards

International Nuclear Information System (INIS)

Horsager, B.K.

1985-01-01

A description of the Design Basis and the analysis and design methods used for natural phenomena at the Fuel Cycle Plant at Hanford, Washington is presented. A physical description of the main process facility and the auxiliary emergency and support facilities is given. The mission of the facility is presented and a brief description of the processes which will take place within the facility is given. The Design Criteria and design bases for natural phenomena including tornados, earthquakes and volcanic eruptions are described

Depressed Patients Hospitalized in Southeast-Facing Rooms Are Discharged Earlier than Patients in Northwest-Facing Rooms

DEFF Research Database (Denmark)

Gbyl, Krzysztof; Madsen, Helle Ostergaard; Svendsen, Signe Dunker

2017-01-01

in a specialized affective disorders unit investigated the impact of daylight on the length of hospital stay and improvement of depression. Methods: For a period of 1 year, we collected data on sociodemographics, length of stay, vitamin D, and depression severity for patients in an inpatient affective disorders....... Conclusion: Due to the study design, no causality for the observed difference in length of stay can be given, but the results support findings in previous studies of the importance of architectural orientation providing natural daylight as a factor for improvement....

Impact of daylight savings time on spontaneous pregnancy loss in in vitro fertilization patients.

Science.gov (United States)

Liu, Constance; Politch, Joseph A; Cullerton, Evan; Go, Kathryn; Pang, Samuel; Kuohung, Wendy

2017-01-01

Transition into daylight savings time (DST) has studied negative impacts on health, but little is known regarding impact on fertility. This retrospective cohort study evaluates DST impact on pregnancy and pregnancy loss rates in 1,654 autologous in vitro fertilization cycles (2009 to 2012). Study groups were identified based on the relationship of DST to embryo transfer. Pregnancy rates were similar in Spring and Fall (41.4%, 42.2%). Pregnancy loss rates were also comparable between Spring and Fall (15.5%, 17.1%), but rates of loss were significantly higher in Spring when DST occurred after embryo transfer (24.3%). Loss was marked in patients with a history of prior spontaneous pregnancy loss (60.5%).

Continuous daylight in the high-Arctic summer supports high plankton respiration rates compared to those supported in the dark

KAUST Repository

Mesa, Elena

2017-04-21

Plankton respiration rate is a major component of global CO2 production and is forecasted to increase rapidly in the Arctic with warming. Yet, existing assessments in the Arctic evaluated plankton respiration in the dark. Evidence that plankton respiration may be stimulated in the light is particularly relevant for the high Arctic where plankton communities experience continuous daylight in spring and summer. Here we demonstrate that plankton community respiration evaluated under the continuous daylight conditions present in situ, tends to be higher than that evaluated in the dark. The ratio between community respiration measured in the light (Rlight) and in the dark (Rdark) increased as the 2/3 power of Rlight so that the Rlight:Rdark ratio increased from an average value of 1.37 at the median Rlight measured here (3.62 µmol O2 L-1 d-1) to an average value of 17.56 at the highest Rlight measured here (15.8 µmol O2 L-1 d-1). The role of respiratory processes as a source of CO2 in the Arctic has, therefore, been underestimated and is far more important than previously believed, particularly in the late spring, with 24 h photoperiods, when community respiration rates are highest.

Yellowing of coated papers under the action of heat, daylight radiation, and nitrogen oxide gas

International Nuclear Information System (INIS)

Mailly, V.; Le Nest, J.F.; Tosio, J.M.S.; Silvy, J.

1997-01-01

In the area of coated papers, a high degree of whiteness is often required to carry a quality image. Coated papers however are sensitive to the environment where they are stored and have tendency to yellow. The aim of this work was to study the influence of(i) daylight radiation and (ii) nitrogen oxide gas (NO2 ) on the yellowing of coated papers. In a previous study (l), we had established the presence of NO2 in the environment of some coating machines because of the transformation of ammonium hydroxide (NH4 OH, a component of some coating colors) into nitrogen oxide through the burners of hot air supplier-systems

Energy Performance of Three Residential College Buildings in University of Malaya Campus, Kuala Lumpur

Directory of Open Access Journals (Sweden)

Adi Ainurzaman Jamaludin

2011-12-01

Full Text Available Three residential colleges located in Kuala Lumpur, Malaysia, were selected for energy performance analysis in regards to its implementation of bioclimatic design strategies. Specifically, passive design strategies on daylighting and natural ventilation were examined. In Malaysia, the residential college or hostel is a multi-residential building providing accommodation to university students. The three residential colleges in this study, namely C1, C2 and C3, were built in different years with different designs and forms, particularly with regards to enclosure and facade design, solar control devices, passive daylight concepts, and natural ventilation strategies. The building designs were carefully studied and an electric consumption analysis was carried out in each residential college. This study revealed that the wide-scale implementation of bioclimatic design strategies in college C2 help reduced the annual energy consumption. The building bioclimatic design features that are accountable to reduce energy consumption are the internal courtyard and balconies on each unit of floor area, as shown in C3.Results from this study highly recommend internal courtyard and balcony building combination for multi residential building design, especially in tropical urban regions.

Quantitative and creative design tools for urban design in cold and windy climates

DEFF Research Database (Denmark)

Koss, Holger; Jensen, Lotte Bjerregaard; Nielsen, Thomas Alexander Sick

2014-01-01

between the design processes and the academic knowledge available is a focus area. The effects of climate change and a general higher demand for quantitative assessment of urban planning proposals in hard climatic locations have created a demand for research based design advice. The paper will present......In cold and windy climates, the quality of the urban spaces is severely challenged. A design process with a very high level of information regarding wind, sun, daylight and water from the earliest of the design process will help create the most optimized design. For the last couple of years...... in academic ‘silos’ where little attention has been made in regards to architectural design processes. Simulation tools were developed that can render a larger amount of information available in a short time and thus can keep pace with an ongoing design process in an architectural studio. Bridging the gap...

Optimization design of solar enhanced natural draft dry cooling tower

International Nuclear Information System (INIS)

Zou, Zheng; Guan, Zhiqiang; Gurgenci, Hal

2013-01-01

Highlights: • We proposed a cost model for solar enhanced natural draft dry cooling tower. • We proposed an optimization scheme for this new cooling system. • We optimally designed one for a 50 MW EGS geothermal plant as a demonstration. • Results proved its economic advantages for EGS geothermal application. - Abstract: This paper proposed an optimization scheme for solar enhanced natural draft dry cooling tower design, in which a detailed cost model was proposed including capital, labour, maintenance and operation costs of each component. Based on the developed cost model, the optimal design option can be identified in terms of the relatively lower annual cost and the relatively higher total extra income over the Solar Enhanced Natural Draft Dry Cooling Tower (SENDDCT) lifetime. As a case study, a SENDDCT was optimally designed to meet the cooling demand for a 50 MW geothermal power plant with Engineered Geothermal System (EGS) technology. The results showed that the optimized SENDDCT not only has better cooling performance during the daytime but also is a cost effective option for EGS geothermal power plants

Daylight photocatalysis performance of biomorphic CeO{sub 2} hollow fibers prepared with lens cleaning paper as biotemplate

Energy Technology Data Exchange (ETDEWEB)

Qian, Junchao; Chen, Feng [Department of Material Science and Engineering, Jiangsu University, 212013 Zhenjiang (China); Wang, Fang; Zhao, Xiaobing [Department of Materials Science and Engineering, Changzhou University, 213164 Changzhou (China); Chen, Zhigang, E-mail: ziyou1900@gmail.com [Department of Material Science and Engineering, Jiangsu University, 212013 Zhenjiang (China); Jiangsu Key Laboratory for Environment Functional Materials, 215009 Suzhou University of Science and Technology, Suzhou (China); State Key laboratory of Crystal Material, Shandong University, 250100 Jinan (China)

2012-08-15

Highlights: ► A novel, simple and eco-friendly approach for hierarchical, biomorphic CeO{sub 2} hollow fibers with mesoporous tube walls is presented by using paper as template. ► The biomorphic CeO{sub 2} fibers was composed of nanosheets with bimodal pore-size mesoporous distribution and exhibited high light-harvesting under sunlight irradiation. ► The CeO{sub 2} microfibers biomimicking the natural plant structures have promising application for photodegradation of organic pollutants in water. -- Abstract: Hierarchical, biomorphic CeO{sub 2} hollow fibers with mesoporous tube walls have been fabricated using lens cleaning paper as biotemplates. After sintered at 550 °C in air, the cellulosic fibers of paper were converted into micro-tubes composing of CeO{sub 2} crystallites with grain size about 8 nm. The photocatalytic activity of the CeO{sub 2} fibers was evaluated by photodegradation efficiency of methylene blue in aqueous solution under daylight irradiation. The characterized results show that the CeO{sub 2} fibers faithfully replicated micro-fibrous structure derived from original template and possessed dramatic enhanced photocatalytic activity compared with bulk CeO{sub 2}. This simple biotemplate method provides a cost-effective and eco-friendly route to obtain high performance photocatalysts.

Integrated control of sun shades, daylight and artificial light; Integreret regulering af solafskaermning, dagslys og kunstlys

Energy Technology Data Exchange (ETDEWEB)

Johnsen, K.; Christoffersen, J.; Soerensen, Henrik; Jessen, G.

2011-07-01

The project established a basis of calculation and a practical basis for optimum choice of solar shading and integrated control strategies for both new buildings and for office, commercial and institutional buildings to be renovated with new calculation models for controlling solar shading integrated in the BSim program. A complete and applicable model for optimum, integrated solar shading control was established, focusing on thermal and visual comfort criteria towards energy consumption for heating, cooling and lighting. A prototype was tested in the daylight laboratory at Danish Building Research Institute-Aalborg University and at University of Southern Denmark. (LN)

Solar Shading in Low Energy Office Buildings - Design Strategy and User Perception

Directory of Open Access Journals (Sweden)

Steinar Grynning

2017-06-01

Full Text Available The objective of this paper is to investigate the visual comfort and quality of daylight in modern office buildings in the Nordic climate. A study of various daylight-related aspects and qualities was carried out for three different office buildings, using a combination of quantitative and qualitative methods. The focus was on a combination of user perception of daylight quality and assessment of the daylight amount and quality, by using the daylight factor (DF and useful daylight illuminance parameters. Previous studies and experiences from construction examples indicate that users, in general, complain about lack of manual control of systems and too low daylight levels, even if the requirements in the building codes are satisfied. Furthermore, they complain about control algorithms of the shading devices, which cause undesired automatic opening and closure of such devices. Thus, causing disturbances and irritation amongst the users. Hence, interviews with key personnel in a modern and architecturally acclaimed office building were carried out in addition to an in-depth analysis of previous surveys of a zero-energy office building. It was found that automatic moveable shading can be regarded as a source of discomfort. This is due to the lack of manual-control override possibilities, which causes disturbances due to the system moving up and down. In one of the offices, the users disabled the exterior shading system. However, the external fixed shading and the internal manually operated roller blinds were found to be satisfactory. The results from a previous study showed that the users in the Marche building are in general satisfied with the daylight. One of the main reasons for this, according to the users, is that they have manual control of the shading system. Manual control of the shading systems is preferred by users in the office buildings studied. Daylight simulations showed that the external fixed shading system combined with internal

La representación de la luz natural en el proyecto arquitectónico

OpenAIRE

Meneses Bedoya, Edgar Alonso

2016-01-01

The representation of natural light is placed in the context of architectural drawing, showing that despite the leading role of daylight in architecture, the representation of its phenomenology was limited to the geometric layout of the shadows in space; however, with the addition of IT technology and virtual simulation, this representation takes on a new communicative dimension through the use of realistic images that can represent phenomenology light as it is perceived and assist the archit...

Climate Responsive Design and the Milam Residence

Directory of Open Access Journals (Sweden)

Mohammad Shahadat

2011-11-01

Full Text Available Energy conservation and efficiency is an essential area of focus in contemporary building design. The perception that the designers of buildings during the Modernist period of architecture ignored these principles is a false one. The present study, an examination of Paul Rudolph’s Milam Residence, a masterpiece of American residential architecture, is part of a larger project endeavoring to create a knowledge base of the environmental performance of iconic modernist homes. A critical examination of the Milam House allows insight into specific design characteristics that impact energy efficiency and conservation. Located in Ponte Vedra Beach, Florida, the Milam Residence was constructed in 1962. It was the last of a series of Florida residences designed by Rudolph, Chairman of the Department of Architecture at Yale University (1958–1965. The structure’s form is strongly related to its location on a subtropical beachfront. This paper presents a detailed analysis of the building’s solar responsiveness. Specifically, we examine design strategies such as orientation and sunscreening and their effect on daylighting, shading, and heat gain. The analysis is based on parametric energy modeling studies using Autodesk’s Ecotect, an environmental analysis tool that allows simulation of building performance. While the initial target of the program was early design, the program allows the input of complex geometries and detailed programming of zones, materials, schedules, etc. The program's excellent analyses of desired parameters are augmented by visualizations that make it especially valuable in communicating results. Our findings suggest that the building, as built and situated on the site, does take advantage of daylighting and solar shading and does so in both expected and unexpected ways.

Impact of daylight saving time on the Chilean residential consumption

International Nuclear Information System (INIS)

Verdejo, Humberto; Becker, Cristhian; Echiburu, Diego; Escudero, William; Fucks, Emiliano

2016-01-01

Since 1970 Chile has had a Daylight Saving Time (DST) policy in order to reduce residential electricity consumption in the country. The time change was set for the first time by executive decree in 1970, and since that date it was applied every year without great changes until 2010. Since then, and to date, decrees have been set in order to increase the duration of the DST, arguing that there are reasons associated with energy savings that justify the extension of the measure that has been adopted by the authority in recent years. In the present study the impact of the application of DST in terms of decreased household electricity consumption is analyzed using two complementary methods, one based on a heuristic approach and the other using an econometric model. The results indicate that there is indeed a marginally small reduction in residential electricity consumption, although these results are not homogeneous throughout the country. - Highlights: • The impact of the application of DST is analyzed in Chilean distribution networks. • The results indicate that there is indeed a marginally small reduction in residential electricity consumption. • A total energy reduction is estimated based on the proposed methodology.

Natural selection and algorithmic design of mRNA.

Science.gov (United States)

Cohen, Barry; Skiena, Steven

2003-01-01

Messenger RNA (mRNA) sequences serve as templates for proteins according to the triplet code, in which each of the 4(3) = 64 different codons (sequences of three consecutive nucleotide bases) in RNA either terminate transcription or map to one of the 20 different amino acids (or residues) which build up proteins. Because there are more codons than residues, there is inherent redundancy in the coding. Certain residues (e.g., tryptophan) have only a single corresponding codon, while other residues (e.g., arginine) have as many as six corresponding codons. This freedom implies that the number of possible RNA sequences coding for a given protein grows exponentially in the length of the protein. Thus nature has wide latitude to select among mRNA sequences which are informationally equivalent, but structurally and energetically divergent. In this paper, we explore how nature takes advantage of this freedom and how to algorithmically design structures more energetically favorable than have been built through natural selection. In particular: (1) Natural Selection--we perform the first large-scale computational experiment comparing the stability of mRNA sequences from a variety of organisms to random synonymous sequences which respect the codon preferences of the organism. This experiment was conducted on over 27,000 sequences from 34 microbial species with 36 genomic structures. We provide evidence that in all genomic structures highly stable sequences are disproportionately abundant, and in 19 of 36 cases highly unstable sequences are disproportionately abundant. This suggests that the stability of mRNA sequences is subject to natural selection. (2) Artificial Selection--motivated by these biological results, we examine the algorithmic problem of designing the most stable and unstable mRNA sequences which code for a target protein. We give a polynomial-time dynamic programming solution to the most stable sequence problem (MSSP), which is asymptotically no more complex

DOE natural phenomenal hazards design and evaluation criteria

International Nuclear Information System (INIS)

Murray, R.C.; Nelson, T.A.; Short, S.A.; Kennedy, R.P.; Chander, H.; Hill, J.R.; Kimball, J.K.

1994-10-01

It is the policy of the Department of Energy (DOE) to design, construct, and operate DOE facilities so that workers, the general public, and the environment are protected from the impacts of natural phenomena hazards (NPH). Furthermore, DOE has established explicit goals of acceptable risk for NPH performance. As a result, natural phenomena hazard (earthquake, extreme wind, and flood) design and evaluation criteria for DOE facilities have been developed based on target probabilistic performance goals. These criteria include selection of design/evaluation NPH input from probabilistic hazard curves combined with commonly practiced deterministic response evaluation methods and acceptance criteria with controlled levels of conservatism. For earthquake considerations, conservatism is intentionally introduced in specification of material strengths and capacities, in the allowance of limited inelastic behavior, and by a seismic scale factor. Criteria have been developed following a graded approach for several performance goals ranging from that appropriate for normal-use facilities to that appropriate for facilities involving hazardous or critical operations. Performance goals are comprised of qualitative expressions of acceptable behavior and of target quantitative probabilities that acceptable limits of behavior are maintained. The criteria are simple procedures but have a rigorous basis. This paper addresses DOE seismic design and evaluation criteria

Recombinant protein blends: silk beyond natural design.

Science.gov (United States)

Dinjaski, Nina; Kaplan, David L

2016-06-01

Recombinant DNA technology and new material concepts are shaping future directions in biomaterial science for the design and production of the next-generation biomaterial platforms. Aside from conventionally used synthetic polymers, numerous natural biopolymers (e.g., silk, elastin, collagen, gelatin, alginate, cellulose, keratin, chitin, polyhydroxyalkanoates) have been investigated for properties and manipulation via bioengineering. Genetic engineering provides a path to increase structural and functional complexity of these biopolymers, and thereby expand the catalog of available biomaterials beyond that which exists in nature. In addition, the integration of experimental approaches with computational modeling to analyze sequence-structure-function relationships is starting to have an impact in the field by establishing predictive frameworks for determining material properties. Herein, we review advances in recombinant DNA-mediated protein production and functionalization approaches, with a focus on hybrids or combinations of proteins; recombinant protein blends or 'recombinamers'. We highlight the potential biomedical applications of fibrous protein recombinamers, such as Silk-Elastin Like Polypeptides (SELPs) and Silk-Bacterial Collagens (SBCs). We also discuss the possibility for the rationale design of fibrous proteins to build smart, stimuli-responsive biomaterials for diverse applications. We underline current limitations with production systems for these proteins and discuss the main trends in systems/synthetic biology that may improve recombinant fibrous protein design and production. Copyright © 2016. Published by Elsevier Ltd.

Nature-inspired design of hybrid intelligent systems

CERN Document Server

Castillo, Oscar; Kacprzyk, Janusz

2017-01-01

This book highlights recent advances in the design of hybrid intelligent systems based on nature-inspired optimization and their application in areas such as intelligent control and robotics, pattern recognition, time series prediction, and optimization of complex problems. The book is divided into seven main parts, the first of which addresses theoretical aspects of and new concepts and algorithms based on type-2 and intuitionistic fuzzy logic systems. The second part focuses on neural network theory, and explores the applications of neural networks in diverse areas, such as time series prediction and pattern recognition. The book’s third part presents enhancements to meta-heuristics based on fuzzy logic techniques and describes new nature-inspired optimization algorithms that employ fuzzy dynamic adaptation of parameters, while the fourth part presents diverse applications of nature-inspired optimization algorithms. In turn, the fifth part investigates applications of fuzzy logic in diverse areas, such as...

Experimental design of natural and accellerated bone and wood ageing

DEFF Research Database (Denmark)

Facorellis, Y.; Pournou, A.; Richter, Jane

2015-01-01

This paper presents the experimental design for natural and accelerated ageing of bone and wood samples found in museum conditions that was conceived as part of the INVENVORG (Thales Research Funding Program – NRSF) investigating the effects of the environmental factors on natural organic materials....

Design Transformation based on Nature and Identity Formation in the Design of Landscape Elements

Directory of Open Access Journals (Sweden)

Zulkifli Muslim

2016-01-01

Full Text Available There is a lack of initiative from the designers to integrate the environmental resources in the material and design production of local urban landscape elements that reflects human culture and lifestyle. Based on criteria and principles of symbol design and transformation process, this paper describes the symbiotic relationship between local plants (flower and designs of landscape elements. Using visual analysis, the researcher manipulated shapes and forms of local plant images in producing possible shapes and forms for a design of landscape element (lamp post. The results indicate that the design transformation is a systematic process that allows for variations in design without losing the core characteristics and identity of the basic elements of nature.

Building a Practical Natural Laminar Flow Design Capability

Science.gov (United States)

Campbell, Richard L.; Lynde, Michelle N.

2017-01-01

A preliminary natural laminar flow (NLF) design method that has been developed and applied to supersonic and transonic wings with moderate-to-high leading-edge sweeps at flight Reynolds numbers is further extended and evaluated in this paper. The modular design approach uses a knowledge-based design module linked with different flow solvers and boundary layer stability analysis methods to provide a multifidelity capability for NLF analysis and design. An assessment of the effects of different options for stability analysis is included using pressures and geometry from an NLF wing designed for the Common Research Model (CRM). Several extensions to the design module are described, including multiple new approaches to design for controlling attachment line contamination and transition. Finally, a modification to the NLF design algorithm that allows independent control of Tollmien-Schlichting (TS) and cross flow (CF) modes is proposed. A preliminary evaluation of the TS-only option applied to the design of an NLF nacelle for the CRM is performed that includes the use of a low-fidelity stability analysis directly in the design module.

Daylight-driven photocatalytic degradation of ionic dyes with negatively surface-charged In{sub 2}S{sub 3} nanoflowers: dye charge-dependent roles of reactive species

Energy Technology Data Exchange (ETDEWEB)

Ge, Suxiang [Xuchang University, Key Laboratory of Micro-Nano Materials for Energy Storage and Conversion of Henan Province, Institute of Surface Micro and Nano Materials, and School of Chemistry and Chemical Engineering (China); Cai, Lejuan, E-mail: 494169965@qq.com [Central China Normal University, Key Laboratory of Pesticide and Chemical Biology of Ministry of Education, College of Chemistry (China); Li, Dapeng, E-mail: lidapengabc@126.com; Fa, Wenjun; Zhang, Yange; Zheng, Zhi [Xuchang University, Key Laboratory of Micro-Nano Materials for Energy Storage and Conversion of Henan Province, Institute of Surface Micro and Nano Materials, and School of Chemistry and Chemical Engineering (China)

2015-12-15

Even though dye degradation is a successful application of semiconductor photocatalysis, the roles of reactive species in dye degradation have not received adequate attention. In this study, we systematically investigated the degradation of two cationic dyes (rhodamine B and methylene blue) and two anionic dyes (methyl orange and orange G) over negatively surface-charged In{sub 2}S{sub 3} nanoflowers synthesized at 80 °C under indoor daylight lamp irradiation. It is notable to find In{sub 2}S{sub 3} nanoflowers were more stable in anionic dyes degradation compared to that in cationic dyes removal. The active species trapping experiments indicated photogenerated electrons were mainly responsible for cationic dyes degradation, but holes were more important in anionic dyes degradation. A surface-charge-dependent role of reactive species in ionic dye degradation was proposed for revealing such interesting phenomenon. This study would provide a new insight for preparing highly efficient daylight-driven photocatalyst for ionic dyes degradation.

Daylighting analysis of rooflights through model measurements in the artificial sky

Energy Technology Data Exchange (ETDEWEB)

Filetoht, Levente I. [University of Technnology and Economics, Budapest, Hungary (Hungary)

2000-07-01

In investigating the daylighting of rooflights, it can be assumed that they are behaving as luminaires-having a major role in the lighting features of the interior space. Until now there is not enough precise information on these daylighting systems, and because of this, it is difficult to predict precisely the quality and quantity of illuminance and the light distribution in the interior. The exact behavior of the rooflights are complex and sophisticated. Their features are based on their geometry, reflectance and transmittance of their non-transparent, transparent and translucent surfaces. The effect of these features can not be predicted of calculated using the traditional mathematical methods. I am investigating roof-lighting systems taking into account the complex effects of their parts, using a completely new method based on a series of model measurements under artificial sky. Investigating the roof-light as a complex system which consist of relatively large surfaces and the effects of surfaces on other surfaces. Considering the different illuminance fields of the different types of roof-lighting systems. I will be able to determine the light distribution and efficiency of the system as well. The results of this research will lead to the development of a new computer software which is beyond the scope of this paper. [Spanish] Al investigar la iluminacion de luz de dia de luces de techo puede suponerse que se estan comportando como luminarias teniendo un papel principal en las caracteristicas de iluminacion del espacio interior. Hasta ahora no existe ninguna informacion precisa de estos sistemas de iluminacion de dia y a causa de ello es dificil predecir con precision la calidad y cantidad de iluminancia y la distribucion de la luz en el interior. El comportamiento exacto de las luces de techo es complejo y sofisticado. Sus caracteristicas estan basadas en su geometria, reflectancia y trasmitancia de sus superficies no transparentes, transparentes y

On the development of new SPMN diurnal video systems for daylight fireball monitoring

Science.gov (United States)

Madiedo, J. M.; Trigo-Rodríguez, J. M.; Castro-Tirado, A. J.

2008-09-01

Convenciones Ecológicas y Medioambientales (CIECEM, University of Huelva), in the environment of Doñana Natural Park (Huelva province). In this way, both stations, which are separated by a distance of 75 km, will work as a double video station system in order to provide trajectory and orbit information of mayor bolides and, thus, increase the chance of meteorite recovery in the Iberian Peninsula. The new diurnal SPMN video stations are endowed with different models of Mintron cameras (Mintron Enterprise Co., LTD). These are high-sensitivity devices that employ a colour 1/2" Sony interline transfer CCD image sensor. Aspherical lenses are attached to the video cameras in order to maximize image quality. However, the use of fast lenses is not a priority here: while most of our nocturnal cameras use f0.8 or f1.0 lenses in order to detect meteors as faint as magnitude +3, diurnal systems employ in most cases f1.4 to f2.0 lenses. Their focal length ranges from 3.8 to 12 mm to cover different atmospheric volumes. The cameras are arranged in such a way that the whole sky is monitored from every observing station. Figure 1. A daylight event recorded from Sevilla on May 26, 2008 at 4h30m05.4 +-0.1s UT. The way our diurnal video cameras work is similar to the operation of our nocturnal systems [1]. Thus, diurnal stations are automatically switched on and off at sunrise and sunset, respectively. The images taken at 25 fps and with a resolution of 720x576 pixels are continuously sent to PC computers through a video capture device. The computers run a software (UFOCapture, by SonotaCo, Japan) that automatically registers meteor trails and stores the corresponding video frames on hard disk. Besides, before the signal from the cameras reaches the computers, a video time inserter that employs a GPS device (KIWI-OSD, by PFD Systems) inserts time information on every video frame. This allows us to measure time in a precise way (about 0.01 sec.) along the whole fireball path. EPSC Abstracts

Novel Natural Convection Heat Sink Design Concepts From First Principles

Science.gov (United States)

2016-06-01

CONVECTION HEAT SINK DESIGN CONCEPTS FROM FIRST PRINCIPLES by Derek E. Fletcher June 2016 Thesis Advisor: Garth Hobson Second Reader...COVERED Master’s Thesis 4. TITLE AND SUBTITLE NOVEL NATURAL CONVECTION HEAT SINK DESIGN CONCEPTS FROM FIRST PRINCIPLES 5. FUNDING NUMBERS 6...CONVECTION HEAT SINK DESIGN CONCEPTS FROM FIRST PRINCIPLES Derek E. Fletcher Lieutenant Commander, United States Navy B.S., Southwestern

Creating identity with nature inspired lighting design – The Sensitive Organism

Directory of Open Access Journals (Sweden)

Hiort-Lorenzen Anna-Rosa

2018-01-01

Full Text Available People, as living organisms, exist in symbiosis with nature; therefore, contact with nature is a basic human need. City nature is an important aspect of the urban living environment because people need an escapist experience from the everyday city life that they should find within their close environment. The outdoor lighting of urban nightscapes has a major influence on people's perception of space. Cities with an increasing number of inhabitants and late-night economic activity transform into 24-hour operating cities. This means that more attention should be given to investigating the social needs of public spaces in terms of night-time urban lighting, creating experiences and identities with nature. This paper aims to emphasize the potential hidden in nature-inspired lighting as a topic for further development in the field of lighting design. Nature inspired lighting is based on a transdisciplinary approach, where terms like biomimicry, biophilia, and urban green space adopted from other subject fields than lighting influence the lighting design process in order to create a product addressing human inner connectedness to nature. The example used in this paper presents the concept of a lighting master plan called “The Sensitive Organism”.

Lost sleep and cyberloafing: Evidence from the laboratory and a daylight saving time quasi-experiment.

Science.gov (United States)

Wagner, David T; Barnes, Christopher M; Lim, Vivien K G; Ferris, D Lance

2012-09-01

The Internet is a powerful tool that has changed the way people work. However, the ubiquity of the Internet has led to a new workplace threat to productivity-cyberloafing. Building on the ego depletion model of self-regulation, we examine how lost and low-quality sleep influence employee cyberloafing behaviors and how individual differences in conscientiousness moderate these effects. We also demonstrate that the shift to Daylight Saving Time (DST) results in a dramatic increase in cyberloafing behavior at the national level. We first tested the DST-cyberloafing relation through a national quasi-experiment, then directly tested the relation between sleep and cyberloafing in a closely controlled laboratory setting. We discuss the implications of our findings for theory, practice, and future research.

Development and validation of natural circulation based systems for new WWER designs

International Nuclear Information System (INIS)

Kurakov, Y.A.; Dragunov, Y.G.; Podshibiakin, A.K.; Fil, N.S.; Logvinov, S.A.; Sitnik, Y.K.; Berkovich, V.M.; Taranov, G.S.

2002-01-01

Elaboration and introduction of NPP designs with improved technical and economic parameters are defined as an important element of the National Program of nuclear power development approved by the Russian Federation Government in 1998. This Program considers the designs of WWER-1000/V-392 and WWER-640/ V-407 power units as the priority projects of the new generation NPPs with increased safety. A number of passive systems based on natural circulation phenomena are used in V-392 and V-407 designs to prevent or mitigate severe accidents. Design basis, configuration and effect of some naturally driven systems of V-392 design sited at Novovoronezh are mainly reflected in the present paper. One of the most important mean for severe accident prevention in V-392 design is so called SPOT - passive heat removal system designed to remove core decay heat in case of station blackout (including failure of all diesel generators). This system extracts the steam from the steam generator, condenses it and returns water to steam generator by natural circulation. The SPOT heat exchangers are cooled by atmospheric air coming by natural circulation through a special direct action control gates which operate passively as well. Extensive experimental investigation of the different aspects of this system operation has been carried out to validate its functioning under real plant conditions. In particular, full-scale section of air heat exchanger-condenser has been tested with natural circulation steam, condensate and air paths modeled. The environment air temperature and steam pressure condensing were varied in the wide range, and the relevant experimental results are being discussed in this paper. The effect of wind velocity and direction to the containment is also checked by the experiments. (author)

Natural phenomena hazards design and evaluation criteria for Department of Energy Facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-01-01

The Department of Energy (DOE) has issued an Order 420.1 which establishes policy for its facilities in the event of natural phenomena hazards (NPH) along with associated NPH mitigation requirements. This DOE Standard gives design and evaluation criteria for NPH effects as guidance for implementing the NPH mitigation requirements of DOE Order 420.1 and the associated implementation Guides. These are intended to be consistent design and evaluation criteria for protection against natural phenomena hazards at DOE sites throughout the United States. The goal of these criteria is to assure that DOE facilities can withstand the effects of natural phenomena such as earthquakes, extreme winds, tornadoes, and flooding. These criteria apply to the design of new facilities and the evaluation of existing facilities. They may also be used for modification and upgrading of existing facilities as appropriate. The design and evaluation criteria presented herein control the level of conservatism introduced in the design/evaluation process such that earthquake, wind, and flood hazards are treated on a consistent basis. These criteria also employ a graded approach to ensure that the level of conservatism and rigor in design/evaluation is appropriate for facility characteristics such as importance, hazards to people on and off site, and threat to the environment. For each natural phenomena hazard covered, these criteria consist of the following: Performance Categories and target performance goals as specified in the DOE Order 420.1 NPH Implementation Guide, and DOE-STD-1 021; specified probability levels from which natural phenomena hazard loading on structures, equipment, and systems is developed; and design and evaluation procedures to evaluate response to NPH loads and criteria to assess whether or not computed response is permissible.

Enzyme (re)design: lessons from natural evolution and computation.

Science.gov (United States)

Gerlt, John A; Babbitt, Patricia C

2009-02-01

The (re)design of enzymes to catalyze 'new' reactions is a topic of considerable practical and intellectual interest. Directed evolution (random mutagenesis followed by screening/selection) has been used widely to identify novel biocatalysts. However, 'rational' approaches using either natural divergent evolution or computational predictions based on chemical principles have been less successful. This review summarizes recent progress in evolution-based and computation-based (re)design.

The impact on energy consumption of daylight saving clock changes

Energy Technology Data Exchange (ETDEWEB)

Hill, S.I.; Desobry, F. [Department of Engineering, University of Cambridge (United Kingdom); Garnsey, E.W. [Institute for Manufacturing, University of Cambridge (United Kingdom); Chong, Y.-F. [IPA Energy and Water Consulting (United Kingdom)

2010-09-15

The focus of this work is an investigation of the effect of prevailing time regime on energy consumption. In particular we perform analysis demonstrating potential energy savings which could be obtained were Great Britain to maintain daylight savings time (DST) over winter, instead of reverting to Greenwich mean time (GMT). We review the literature on the effect of DST on energy consumption and show that this indicates a justification for considering the issue. Our headline result is in agreement with many related studies in that advancing the clock by an hour in winter would lead to energy savings of at least 0.3% of daily demand in Great Britain. In deriving this result we have adopted methodologies currently used in load prediction, in particular Support Vector Regression, to estimate energy demand on a half-hourly basis. Corresponding cost savings are found to be higher (due to the nonlinear increase of costs) and we find them to be on the order of 0.6% over the months considered. In terms of environmental impact we find the saving to be approximately equivalent to 450,000 ton of CO{sub 2}. In deriving these results we adopt a conservative approach such that we consider them lower bounds on any true savings. (author)

The impact on energy consumption of daylight saving clock changes

International Nuclear Information System (INIS)

Hill, S.I.; Desobry, F.; Garnsey, E.W.; Chong, Y.-F.

2010-01-01

The focus of this work is an investigation of the effect of prevailing time regime on energy consumption. In particular we perform analysis demonstrating potential energy savings which could be obtained were Great Britain to maintain daylight savings time (DST) over winter, instead of reverting to Greenwich mean time (GMT). We review the literature on the effect of DST on energy consumption and show that this indicates a justification for considering the issue. Our headline result is in agreement with many related studies in that advancing the clock by an hour in winter would lead to energy savings of at least 0.3% of daily demand in Great Britain. In deriving this result we have adopted methodologies currently used in load prediction, in particular Support Vector Regression, to estimate energy demand on a half-hourly basis. Corresponding cost savings are found to be higher (due to the nonlinear increase of costs) and we find them to be on the order of 0.6% over the months considered. In terms of environmental impact we find the saving to be approximately equivalent to 450,000 ton of CO 2 . In deriving these results we adopt a conservative approach such that we consider them lower bounds on any true savings.

One-pot solvothermal synthesis of highly efficient, daylight active and recyclable Ag/AgBr coupled photocatalysts with synergistic dual photoexcitation

International Nuclear Information System (INIS)

Zhang, Caihong; Ai, Lunhong; Li, Lili; Jiang, Jing

2014-01-01

Highlights: • Ag/AgBr photocatalysts were controllably synthesized by solvothermal process. • Ag/AgBr composites showed excellent daylight driven photocatalytic activity. • The remarkable activity is attributed to the synergistic dual photoexcitation. -- Abstract: Efficient light harvesting has been considered to be critical for manipulating the photocatalytic behavior of photocatalysts, because it directly determines the generation of reactive redox charge carriers involved in photoreaction process. In this study, we present a successful example on efficient conversion of solar energy by Ag/AgBr coupled photocatalysts that hold unique synergistic dual photoexcitation. A series of Ag/AgBr coupled photocatalysts were controllably synthesized by an easily manipulated mild solvothermal process. The physicochemical properties of the as-prepared Ag/AgBr coupled photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (EDS) and UV–vis diffuse reflectance spectroscopy (DRS). The results showed the solvothermal reaction time played key role for control of crystalline structure, morphology, composition, and visible light absorption ability of the resulting photocatalysts. The as-prepared Ag/AgBr coupled photocatalysts exhibited remarkable photocatalytic performance and good reusability for decomposing organic dyes in aqueous solution under the irradiation of commercial 20 W cool daylight fluorescent lamp, owing to the synergistic dual photoexcitation cooperating between plasmonic Ag nanoparticles and narrow-band-gap AgBr

Dawn song in natural and artificial continuous day: Light pollution affects songbirds at high latitudes.

Science.gov (United States)

Derryberry, Elizabeth P

2017-10-01

In Focus: Da Silva, A., & Kempenaers, B. (2017). Singing from North to South: Latitudinal variation in timing of dawn singing under natural and artificial light conditions. Journal of Animal Ecology, 86, 1286-1297. doi: 10.1111/1365-2656.12739 Satellite images of the world at night show bright dots connected by glowing lines crisscrossing the globe. As these connect-the-dots become brighter and expand into more and more remote regions, much of the flora and fauna of the world are experiencing evolutionarily unprecedented levels of light at night. Light cues are essential to most physiological and behavioural processes, and so the need to measure the effects of light pollution on these processes is critical. In this issue, Da Silva and Kempenaers take on this task using an important reproductive behaviour in songbirds-dawn song. The geographic, temporal and taxonomic breadth of sampling in this study allows for a close examination of a potentially complex interaction between light pollution and natural variation in the behaviour of dawn singing across latitude, season and species. Their extensive dataset highlights complexity in how songbirds respond to light pollution. Although light pollution has a strong effect on the timing of dawn song, not all songbirds respond the same way to light pollution, and the effects of light pollution vary with changes in natural light levels. Early dawn singers show more flexibility in the timing of dawn song across the season and across latitudes than late dawn singers, and also appear less affected by light pollution at high latitudes than are late dawn singers. These findings suggest that not all songbirds are responding to artificial continuous daylight as they do to natural continuous daylight, highlighting the general need to measure the fitness effects of light pollution. © 2017 The Author. Journal of Animal Ecology © 2017 British Ecological Society.

Jaké jsou náklady a výnosy letního času?

OpenAIRE

Kožušková, Kateřina

2011-01-01

Daylight saving time (DST) was implemented with purpose to maximize use of daylight and thereby reduce electricity consumption used for lighting. This policy would primarily affect energetics, however its influence was shown in many other areas. The thesis contains general assumptions of daylight saving time impact on electricity consumption and the main goal of the thesis is to identify with the natural experiment whether the extension of daylight saving time till the end of October occuring...

Squidy : a Zoomable Design Environment for Natural User Interfaces

OpenAIRE

König, Werner A.; Rädle, Roman; Reiterer, Harald

2009-01-01

We introduce the interaction library Squidy, which eases the design of natural user interfaces by unifying relevant frameworks and toolkits in a common library. Squidy provides a central design environment based on high-level visual data flow programming combined with zoomable user interface concepts. The user interface offers a Simple visual language and a collection of ready-to-use devices, filters and interaction techniques. The concept of semantic zooming enables nevertheless access to mo...

Gamma irradiator design concepts for radiation vulcanisation of natural rubber latex

International Nuclear Information System (INIS)

Aggarwal, K.S.; Muralidharan, P.; Apte, M.G.; Kalurkar, A.R.; Shah, B.M.

1990-01-01

Radiation vulcanisation of natural rubber latex (NRL) is a new and yet unproven technology and one which involves undefined problems of consumer acceptance and high degree of radiation risk. Therefore, the designer should take care that the initial capital cost of the plant is as low as possible to keep the unit processing cost low during the initial lean period of the product requirement by the market. Three irradiators to process natural rubber latex have been designed as per capacity requirement of the user. Their salient features are described. (author). 2 tabs., 24 figs

A Pareto-based multi-objective optimization algorithm to design energy-efficient shading devices

International Nuclear Information System (INIS)

Khoroshiltseva, Marina; Slanzi, Debora; Poli, Irene

2016-01-01

Highlights: • We present a multi-objective optimization algorithm for shading design. • We combine Harmony search and Pareto-based procedures. • Thermal and daylighting performances of external shading were considered. • We applied the optimization process to a residential social housing in Madrid. - Abstract: In this paper we address the problem of designing new energy-efficient static daylight devices that will surround the external windows of a residential building in Madrid. Shading devices can in fact largely influence solar gains in a building and improve thermal and lighting comforts by selectively intercepting the solar radiation and by reducing the undesirable glare. A proper shading device can therefore significantly increase the thermal performance of a building by reducing its energy demand in different climate conditions. In order to identify the set of optimal shading devices that allow a low energy consumption of the dwelling while maintaining high levels of thermal and lighting comfort for the inhabitants we derive a multi-objective optimization methodology based on Harmony Search and Pareto front approaches. The results show that the multi-objective approach here proposed is an effective procedure in designing energy efficient shading devices when a large set of conflicting objectives characterizes the performance of the proposed solutions.

Separation process design for isolation and purification of natural products

DEFF Research Database (Denmark)

Malwade, Chandrakant R.

Natural products are defined as secondary metabolites produced by plants and form a vast pool of compounds with unlimited chemical and functional diversity. Many of these secondary metabolites are high value added chemicals that are frequently used as ingredients in food, cosmetics, pharmaceuticals...... and other consumer products. Therefore, process technology towards industrial scale production of such high value chemicals from plants has significant value. Natural products can be obtained in pure form via synthetic or semi-synthetic route, but due to their complicated nature these methods have not been...... developed to the extent of industrial production for majority of natural products. Thus, isolation and purification of such natural products from plants is the most viable way to obtain natural products in pure form. This PhD project is mainly concerned with the design of separation process to isolate...

Analysis of the potencial of natural illumination for the savings and efficient use of the energy in buildings located in hot climates; Analisis del potencial de la iluminacion natural para ahorro y uso eficiente de la energia en las edificaciones en climas calidos

Energy Technology Data Exchange (ETDEWEB)

Garcia Chavez, J. R. [Universidad Autonoma Metropolitana-Azcapotzalco, Division de Ciencias y Artes para el Diseno, Departamento de Medio Ambiente, (Mexico)

1997-12-31

Daylight is an essential factor in lightening buildings. Its use is not only oriented to supply illumination to the spaces to provide adequate lightening levels for the optimum execution of their occupants` tasks, but also to supply the appropriate illumination level required in each case for specific functions, as well as to contribute to the psychophysiological health of its users and provide a favorable ambient and the germicide action in the ultraviolet component of the sunlight and besides a portion of vitamin {sup D,} that is needed for people`s health. On the other hand, the rational and efficient use of daylight can contribute to the diminish the consumption of electric power, that is used for the artificial lightning of buildings. This situation is particularly important in hot climates, where the consumption of electricity for lightening interior spaces is huge, mainly in non-dwelling buildings. In this paper the possibilities of the utilization of daylight are explored and analyzed for the purpose of achieving energy savings and the visual thermal and lightning comfort in buildings. [Espanol] La luz natural diurna es un factor indispensable en los edificios. Su uso no solamente esta orientado a proveer de iluminacion a los espacios para proporcionar niveles de iluminancia adecuados para la optima realizacion de las tareas visuales de los ocupantes, sino tambien para proporcionar la calidad luminica que se requiere para cada caso y funcion especificas, asi como contribuir a la salud psicofisiologica de los usuarios al brindarles un ambiente favorable y la accion germicida en la componente ultravioleta luminica y ademas, un contenido de vitamina {sup D,} necesario para la salud de las personas. Por otra parte, el uso sensato y eficiente de la luz natural diurna puede contribuir a reducir el consumo de energia electrica que se utiliza para el alumbrado artificial de los edificios. Esta situacion es de particular importancia en climas calidos, donde los

Analysis of the potencial of natural illumination for the savings and efficient use of the energy in buildings located in hot climates; Analisis del potencial de la iluminacion natural para ahorro y uso eficiente de la energia en las edificaciones en climas calidos

Energy Technology Data Exchange (ETDEWEB)

Garcia Chavez, J R [Universidad Autonoma Metropolitana-Azcapotzalco, Division de Ciencias y Artes para el Diseno, Departamento de Medio Ambiente, (Mexico)

1998-12-31

Daylight is an essential factor in lightening buildings. Its use is not only oriented to supply illumination to the spaces to provide adequate lightening levels for the optimum execution of their occupants` tasks, but also to supply the appropriate illumination level required in each case for specific functions, as well as to contribute to the psychophysiological health of its users and provide a favorable ambient and the germicide action in the ultraviolet component of the sunlight and besides a portion of vitamin {sup D,} that is needed for people`s health. On the other hand, the rational and efficient use of daylight can contribute to the diminish the consumption of electric power, that is used for the artificial lightning of buildings. This situation is particularly important in hot climates, where the consumption of electricity for lightening interior spaces is huge, mainly in non-dwelling buildings. In this paper the possibilities of the utilization of daylight are explored and analyzed for the purpose of achieving energy savings and the visual thermal and lightning comfort in buildings. [Espanol] La luz natural diurna es un factor indispensable en los edificios. Su uso no solamente esta orientado a proveer de iluminacion a los espacios para proporcionar niveles de iluminancia adecuados para la optima realizacion de las tareas visuales de los ocupantes, sino tambien para proporcionar la calidad luminica que se requiere para cada caso y funcion especificas, asi como contribuir a la salud psicofisiologica de los usuarios al brindarles un ambiente favorable y la accion germicida en la componente ultravioleta luminica y ademas, un contenido de vitamina {sup D,} necesario para la salud de las personas. Por otra parte, el uso sensato y eficiente de la luz natural diurna puede contribuir a reducir el consumo de energia electrica que se utiliza para el alumbrado artificial de los edificios. Esta situacion es de particular importancia en climas calidos, donde los

75 FR 37350 - Endangered and Threatened Wildlife and Plants; Designation of Critical Habitat for Vermilion Darter

Science.gov (United States)

2010-06-29

... section, below) the deadline for submitting an electronic comment is 11:59 p.m. Eastern Daylight Savings Time on this date. ADDRESSES: Written Comments:You may submit comments by one of the following methods..., 2001 (66 FR 59367). At the time of listing, the Service found that designation of critical habitat was...

Design and evaluation guidelines for Department of Energy facilities subjected to natural phenomena hazards

International Nuclear Information System (INIS)

Kennedy, R.P.; Short, S.A.; McDonald, J.R.; McCann, M.W. Jr.; Murray, R.C.; Hill, J.R.

1990-06-01

The Department of Energy (DOE) and the DOE Natural Phenomena Hazards Panel have developed uniform design and evaluation guidelines for protection against natural phenomena hazards at DOE sites throughout the United States. The goal of the guidelines is to assure that DOE facilities can withstand the effects of natural phenomena such as earthquakes, extreme winds, tornadoes, and flooding. The guidelines apply to both new facilities (design) and existing facilities (evaluation, modification, and upgrading). The intended audience is primarily the civil/structural or mechanical engineers conducting the design or evaluation of DOE facilities. The likelihood of occurrence of natural phenomena hazards at each DOE site has been evaluated by the DOE Natural Phenomena Hazard Program. Probabilistic hazard models are available for earthquake, extreme wind/tornado, and flood. Alternatively, site organizations are encouraged to develop site-specific hazard models utilizing the most recent information and techniques available. In this document, performance goals and natural hazard levels are expressed in probabilistic terms, and design and evaluation procedures are presented in deterministic terms. Design/evaluation procedures conform closely to common standard practices so that the procedures will be easily understood by most engineers. Performance goals are expressed in terms of structure or equipment damage to the extent that: (1) the facility cannot function; (2) the facility would need to be replaced; or (3) personnel are endangered. 82 refs., 12 figs., 18 tabs

Design and evaluation guidelines for Department of Energy facilities subjected to natural phenomena hazards

Energy Technology Data Exchange (ETDEWEB)

Kennedy, R.P. (Structural Mechanics Consulting, Inc., Yorba Linda, CA (USA)); Short, S.A. (ABB Impell Corp., Mission Viejo, CA (USA)); McDonald, J.R. (Texas Tech Univ., Lubbock, TX (USA)); McCann, M.W. Jr. (Benjamin (J.R.) and Associates, Inc., Mountain View, CA (USA)); Murray, R.C. (Lawrence Livermore National Lab., CA (USA)); Hill, J.R. (USDOE Assistant Secretary for Environment, Safety, and He

1990-06-01

The Department of Energy (DOE) and the DOE Natural Phenomena Hazards Panel have developed uniform design and evaluation guidelines for protection against natural phenomena hazards at DOE sites throughout the United States. The goal of the guidelines is to assure that DOE facilities can withstand the effects of natural phenomena such as earthquakes, extreme winds, tornadoes, and flooding. The guidelines apply to both new facilities (design) and existing facilities (evaluation, modification, and upgrading). The intended audience is primarily the civil/structural or mechanical engineers conducting the design or evaluation of DOE facilities. The likelihood of occurrence of natural phenomena hazards at each DOE site has been evaluated by the DOE Natural Phenomena Hazard Program. Probabilistic hazard models are available for earthquake, extreme wind/tornado, and flood. Alternatively, site organizations are encouraged to develop site-specific hazard models utilizing the most recent information and techniques available. In this document, performance goals and natural hazard levels are expressed in probabilistic terms, and design and evaluation procedures are presented in deterministic terms. Design/evaluation procedures conform closely to common standard practices so that the procedures will be easily understood by most engineers. Performance goals are expressed in terms of structure or equipment damage to the extent that: (1) the facility cannot function; (2) the facility would need to be replaced; or (3) personnel are endangered. 82 refs., 12 figs., 18 tabs.

Design and assessment of an anidolic light-duct

Energy Technology Data Exchange (ETDEWEB)

Courret, G.; Scartezzini, J.L. [Lab. d`Energie Solaire et de Physique du Batiment (LESO-PB), Ecole Polytechnique Federale de Lausanne (Switzerland); Francioli, D.; Meyer, J.J. [Lab. d`Ergonomie de la Vision (LEV), Inst. Univ. Romand de Sante au Travail, Lausanne (Switzerland)

1998-08-01

The system presented here, called Anidolic Ceiling, was developed to show the viability of intensive use of daylight by overcast outdoor conditions in nonresidential buildings. This device consists of a light-duct that is integrated in a suspended ceiling and leads midway into the office. Anidolic (nonimaging optics) elements are placed on either end of the duct, on the outside to collect light rays from the sky and on the inside to control the direction of the emitted light. The present paper describes the system design, as well as an experimental assessment of its daylighting performance in a comparison of a prototype and a full-size conventional facade, for a 6.6-m deep room. Measurements by overcast sky have established that the daylight factor on the work plane 5 m from the window is more than doubled. In addition, a monitoring campaign has shown that 30% of the energy for lighting can be saved. The system was also assessed with regard to the user. Visual comfort measurements (Laboratoire d`Ergonomie de la Vision`s (LEV) method) were carried out showing that for both clear and overcast outdoor conditions, the visual environment quality is objectively improved at the rear working place. Furthermore, 33 people tested both rooms one after the other. They were submitted to a series of visual acuity tests on printed paper and on a computer screen and had to fill in a questionnaire. A comparative study showed that the personal appreciation of the luminous environment is better in the room with an Anidolic Ceiling, with a significant reduction of reading errors both on paper and on the screen. (orig.)

Gesture language use in natural UI: pen-based sketching in conceptual design

Science.gov (United States)

Ma, Cuixia; Dai, Guozhong

2003-04-01

Natural User Interface is one of the important next generation interactions. Computers are not just the tools of many special people or areas but for most people. Ubiquitous computing makes the world magic and more comfortable. In the design domain, current systems, which need the detail information, cannot conveniently support the conceptual design of the early phrase. Pen and paper are the natural and simple tools to use in our daily life, especially in design domain. Gestures are the useful and natural mode in the interaction of pen-based. In natural UI, gestures can be introduced and used through the similar mode to the existing resources in interaction. But the gestures always are defined beforehand without the users' intention and recognized to represent something in certain applications without being transplanted to others. We provide the gesture description language (GDL) to try to cite the useful gestures to the applications conveniently. It can be used in terms of the independent control resource such as menus or icons in applications. So we give the idea from two perspectives: one from the application-dependent point of view and the other from the application-independent point of view.

The Environmental Design of Working Spaces in Equatorial Highlands Zones: The Case of Bogotá

Directory of Open Access Journals (Sweden)

Joana Carla Soares Gonçalves

2015-10-01

Full Text Available Recent empirical investigations have indicated that the majority of occupants in office buildings would appreciate contact with the external environment, especially in cities where the climate is mild for part of the year. Supported by the possibilities of adaptive thermal models, the design of naturally ventilated buildings has been elaborated since the decade of 1990s. More communal areas rather than private ones are demanded due to the importance of social interaction and knowledge transfer among employees. In this context, this paper investigates the possibility of daylight and thermal comfort in naturally ventilated working environments, located in cities of mild climatic conditions, by redefining the parameters of a façade’s design and exploring coupling strategies with the outdoors. For this purpose, the city of Bogotá (Latitude 4°7′ N, in Colombia, a place with great potential for passive strategies, is taken as the geographic context of this research, which is supported by fieldwork with occupants of 37 office buildings and analytical work. The survey revealed that being close to a window is valued by the majority. Furthermore, 50% would like to have informal areas and outdoor spaces attached to their working environments. In additithe analytical studies showed how the combination of a set of environmental design strategies, including a schedule for coupling and decoupling of indoor spaces with the outdoors and a variation of occupancy density, made thermal comfort possible in free running working spaces in Bogotá.

Effect of daylight saving time on lighting energy use: A literature review

International Nuclear Information System (INIS)

Aries, Myriam B.C.; Newsham, Guy R.

2008-01-01

The principal reason for introducing (and extending) daylight saving time (DST) was, and still is, projected energy savings, particularly for electric lighting. This paper presents a literature review concerning the effects of DST on energy use. Simple estimates suggest a reduction in national electricity use of around 0.5%, as a result of residential lighting reduction. Several studies have demonstrated effects of this size based on more complex simulations or on measured data. However, there are just as many studies that suggest no effect, and some studies suggest overall energy penalties, particularly if gasoline consumption is accounted for. There is general consensus that DST does contribute to an evening reduction in peak demand for electricity, though this may be offset by an increase in the morning. Nevertheless, the basic patterns of energy use, and the energy efficiency of buildings and equipment have changed since many of these studies were conducted. Therefore, we recommend that future energy policy decisions regarding changes to DST be preceded by high-quality research based on detailed analysis of prevailing energy use, and behaviours and systems that affect energy use. This would be timely, given the extension to DST underway in North America in 2007

Designed Natural Spaces: Informal Gardens Are Perceived to Be More Restorative than Formal Gardens.

Science.gov (United States)

Twedt, Elyssa; Rainey, Reuben M; Proffitt, Dennis R

2016-01-01

Experimental research shows that there are perceived and actual benefits to spending time in natural spaces compared to urban spaces, such as reduced cognitive fatigue, improved mood, and reduced stress. Whereas past research has focused primarily on distinguishing between distinct categories of spaces (i.e., nature vs. urban), less is known about variability in perceived restorative potential of environments within a particular category of outdoor spaces, such as gardens. Conceptually, gardens are often considered to be restorative spaces and to contain an abundance of natural elements, though there is great variability in how gardens are designed that might impact their restorative potential. One common practice for classifying gardens is along a spectrum ranging from "formal or geometric" to "informal or naturalistic," which often corresponds to the degree to which built or natural elements are present, respectively. In the current study, we tested whether participants use design informality as a cue to predict perceived restorative potential of different gardens. Participants viewed a set of gardens and rated each on design informality, perceived restorative potential, naturalness, and visual appeal. Participants perceived informal gardens to have greater restorative potential than formal gardens. In addition, gardens that were more visually appealing and more natural-looking were perceived to have greater restorative potential than less visually appealing and less natural gardens. These perceptions and precedents are highly relevant for the design of gardens and other similar green spaces intended to provide relief from stress and to foster cognitive restoration.

Designed natural spaces: Informal gardens are perceived to be more restorative than formal gardens

Directory of Open Access Journals (Sweden)

Elyssa eTwedt

2016-02-01

Full Text Available Experimental research shows that there are perceived and actual benefits to spending time in natural spaces compared to urban spaces such as reduced cognitive fatigue, improved mood, and reduced stress. Whereas past research has focused primarily on distinguishing between distinct categories of spaces (i.e., nature versus urban, less is known about variability in perceived restorative potential of environments within a particular category of outdoor spaces, such as gardens. Conceptually, gardens are often considered to be restorative spaces and to contain an abundance of natural elements, though there is great variability in how gardens are designed that might impact their restorative potential. One common practice for classifying gardens is along a spectrum ranging from formal or geometric to informal or naturalistic, which often corresponds to the degree to which built or natural elements are present, respectively. In the current study, we tested whether participants use design informality as a cue to predict perceived restorative potential of different gardens. Participants viewed a set of gardens and rated each on design informality, perceived restorative potential, naturalness, and visual appeal. Participants perceived informal gardens to have greater restorative potential than formal gardens. In addition, gardens that were more visually appealing and more natural-looking were perceived to have greater restorative potential than less visually appealing and less natural gardens. These perceptions and precedents are highly relevant for the design of gardens and other similar green spaces intended to provide relief from stress and to foster cognitive restoration.

Sensing in nature: using biomimetics for design of sensors

DEFF Research Database (Denmark)

Lenau, Torben Anker; Cheong, Hyunmin; Shu, Li

2010-01-01

The paper illustrates how biomimetics can be applied in sensor design. Biomimetics is an engineering discipline that uses nature as an inspiration source for generating ideas for how to solve engineering problems. Using biomimetics involves a search for relevant cases, a proper analysis...... of biomimetic studies of sense organs in animals....

Report on the Meadowbrook Montessori Farm School, Warfield, Berkshire

Energy Technology Data Exchange (ETDEWEB)

Ruyssevelt, P.; Cohen, R.

1994-01-01

This two part report looks at the design, construction and operational performance of the Meadowbrook Montessri Farm School in Berkshire. The first part of the report looks at the energy and environmental design advice provided and assesses its implementation in the building which was constructed. The second part of the report looks at current use of the building and whether actual performance meets its environmental design aims, with particular reference to daylighting, and natural ventilation. (UK)

Creating dune landscapes for nature and housing - how to assess the designs?

Science.gov (United States)

van den Ancker, J.; Jungerius, P. D.; Hartman, J.

2012-04-01

Over the last decades landscape and nature organisations in The Netherlands initiated discussions about safeguarding characteristic historical landscapes, as well as improving nature and landscape quality. In these discussions they were supported by Dutch government agencies and newspapers. As a consequence, architects, landscape architects and building firms in the Netherlands try to upgrade the quality of houses and build-up areas by creating special landscape settings. Dunes are one of the landscapes that appeal to the designers, and several projects make use of dunes to create a quality living environment. Also nature manager construct dunes in what is called 'new nature'. This contribution evaluates several projects creating dune landscapes. Criteria for the evaluation are: - the subsequent geomorphology, - the materials used for construction, - the resulting internal structure, - the soil profile, - the relationship with the vegetation, - the historical integrity of the location. These examples indicate that engaging earth-scientific knowhow would substantially improve the authenticity of the designs.

Daylight-saving time: Consumption and demand saving and pollutants emission reduction; El cambio de horario de verano: Ahorros en consumo y demanda, y reduccion de contaminantes

Energy Technology Data Exchange (ETDEWEB)

Ramos, Gaudencio; Diaz, Rodrigo; Fiscal, Raul; Alquicira, Claudia; Martinez, Serafin; Maqueda, Martin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

This paper presents some of the saving obtained in demand and in fuels with the daylight-saving time, as well as the main aspects considered to make an evaluation of it. [Espanol] Se presentan los ahorros obtenidos en consumo, demanda y combustibles con el cambio de horario de verano, asi como los principales aspectos considerados para efectuar la evaluacion de los mismos.

Daylight-saving time: Consumption and demand saving and pollutants emission reduction; El cambio de horario de verano: Ahorros en consumo y demanda, y reduccion de contaminantes

Energy Technology Data Exchange (ETDEWEB)

Ramos, Gaudencio; Diaz, Rodrigo; Fiscal, Raul; Alquicira, Claudia; Martinez, Serafin; Maqueda, Martin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

This paper presents some of the saving obtained in demand and in fuels with the daylight-saving time, as well as the main aspects considered to make an evaluation of it. [Espanol] Se presentan los ahorros obtenidos en consumo, demanda y combustibles con el cambio de horario de verano, asi como los principales aspectos considerados para efectuar la evaluacion de los mismos.

Exploiting Lexical Regularities in Designing Natural Language Systems.

Science.gov (United States)

1988-04-01

ELEMENT. PROJECT. TASKN Artificial Inteligence Laboratory A1A4WR NTumet 0) 545 Technology Square Cambridge, MA 02139 Ln *t- CONTROLLING OFFICE NAME AND...RO-RI95 922 EXPLOITING LEXICAL REGULARITIES IN DESIGNING NATURAL 1/1 LANGUAGE SYSTENS(U) MASSACHUSETTS INST OF TECH CAMBRIDGE ARTIFICIAL INTELLIGENCE...oes.ary and ftdou.Ip hr Nl wow" L,2This paper presents the lexical component of the START Question Answering system developed at the MIT Artificial

Sustainable Building in China—A Green Leap Forward?

Directory of Open Access Journals (Sweden)

Jialiang Wang

2013-09-01

Full Text Available China is constructing new commercial buildings at an enormous rate—roughly 2 billion square meters per year, with considerable interest and activity in green design and construction. We review the context of commercial building design and construction in China, and look at a specific project as an example of a high performance, sustainable design, the Shenzhen Institute of Building Research (IBR. The IBR building incorporates over 40 sustainable technologies and strategies, including daylighting, natural ventilation, gray-water recycling, solar-energy generation, and highly efficient Heating Ventilation and Air Conditioning (HVAC systems. We present measured data on the performance of the building, including detailed analysis by energy end use, water use, and occupant comfort and satisfaction. Total building energy consumption in 2011 was 1151 MWh, with an Energy Use Intensity (EUI of 63 kWh/m2 (20 kBtu/ft2, which is 61% of the mean EUI value of 103 kWh/m2 (33 kBtu/ft2 for similar buildings in the region. We also comment on the unique design process, which incorporated passive strategies throughout the building, and has led to high occupant satisfaction with the natural ventilation, daylighting, and green patio work areas. Lastly we present thoughts on how the design philosophy of the IBR building can be a guide for low-energy design in different climate regions throughout China and elsewhere.

Exploring the Impact of Natural Light Exposure on Sleep of Healthy Older Adults: A Field Study

Directory of Open Access Journals (Sweden)

Mariëlle P. J. Aarts

2018-05-01

Full Text Available Studies among people with dementia demonstrated that the sleep quality and rhythm improves significantly when people are exposed to ambient bright light. Since almost half of the healthy older people also indicate to suffer from chronic sleep disorders, the question arises whether ambient bright light can be beneficial to healthy older people. Particularly the effect on sleep/wake rhythm in relation to the exposure to natural light is the focus. It was hypothesised that the sleep quality would be worse in winter due to a lower daylight dose than in summer due to the lower illuminance and exposure duration. A field study was conducted to examine the relationship between daylight exposure and sleep quality in 14 healthy older adults living independently in their own dwellings in the Netherlands. All participants were asked to take part of the study both during the summer period as well as during the winter period. Therefore, they had to wear an actigraph for five consecutive days which measured sleep, activity and light exposure. Results confirmed that people were significantly longer exposed to high illumination levels (>1000 lx in summer than in winter. Sleep quality measures, however, did not differ significantly between summer and winter. A significant, positive correlation was found between exposure duration to high illuminance from daylight during the day and the sleep efficiency the following night in summer, implying that being exposed to high illuminance for a longer time period has a positive effect on sleep efficiency for the individual data. There was also a tendency of less frequent napping in case of longer exposure duration to light for both seasons. Sleep quality does not differ between summer and winter but is related to the duration of the exposure to bright light the day prior to the night.

Guidelines for the development of natural phenomena hazards design criteria for surface facilities

International Nuclear Information System (INIS)

Nelson, T.A.; Hossain, Q.A.; Murray, R.C.

1992-01-01

This paper discusses the rationale behind the guidelines, criteria, and methodologies that are currently used for natural phenomena hazard design and evaluation of DOE nuclear and non-nuclear facilities. The bases for the performance goals and usage categories specified in UCRL-15910 are examined, and the sources of intentional conservatism in the analyses, design, and evaluation methods and criteria are identified. Outlines of recent developments/changes in DOE Orders related to Natural Phenomena hazard mitigation are also presented. Finally, the authors recommend the use of DOE methodologies as embodied in UCRL-15910 for design and evaluation of surface facilities of the high level nuclear waste repository site

Discomfort glare with complex fenestration systems and the impact on energy use when using daylighting control

Energy Technology Data Exchange (ETDEWEB)

Hoffmann, Sabine; McNeil, Andrew; Lee, Eleanor S.; Kalyanam, Raghuram

2015-11-03

Glare is a frequent issue in highly glazed buildings. A modelling approach is presented that uses discomfort glare probability and discomfort glare index as metrics to determine occupants’ behaviour. A glare control algorithm that actuated an interior shade for glare protection based on the predicted perception was implemented in a building simulation program. A reference case with a state-of-the-art base glazing was compared to the same glazing but with five different complex fenestration systems, i.e., exterior shades. The windows with exterior shades showed significant variations in glare frequencies. Energy use intensity in a prototypical office building with daylighting controls was greatly influenced for the systems with frequent glare occurrence. While the base glazing could benefit from glare control, some of the exterior shades showed significantly greater energy use when discomfort glare-based operation of interior shades was considered.

Method for design of low-energy type houses based on simulations of indoor environment and energy use

DEFF Research Database (Denmark)

Vanhoutteghem, Lies

2013-01-01

with current and future energy requirements, the influence of window size, type and orientation on space heating demand and thermal indoor environment were investigated in EnergyPlus by comparing a window design with an even distribution (same glazingto-floor-area in each room) with a traditional window design....... Charts illustrating a space of solutions for space heating demand defined by targets for daylight and thermal indoor environment were used to discuss the effect of different window parameters and potential conflicts related to window design were identified in deep or narrow southoriented side-lit rooms...

Building energy analysis of Electrical Engineering Building from DesignBuilder tool: calibration and simulations

Science.gov (United States)

Cárdenas, J.; Osma, G.; Caicedo, C.; Torres, A.; Sánchez, S.; Ordóñez, G.

2016-07-01

This research shows the energy analysis of the Electrical Engineering Building, located on campus of the Industrial University of Santander in Bucaramanga - Colombia. This building is a green pilot for analysing energy saving strategies such as solar pipes, green roof, daylighting, and automation, among others. Energy analysis was performed by means of DesignBuilder software from virtual model of the building. Several variables were analysed such as air temperature, relative humidity, air velocity, daylighting, and energy consumption. According to two criteria, thermal load and energy consumption, critical areas were defined. The calibration and validation process of the virtual model was done obtaining error below 5% in comparison with measured values. The simulations show that the average indoor temperature in the critical areas of the building was 27°C, whilst relative humidity reached values near to 70% per year. The most critical discomfort conditions were found in the area of the greatest concentration of people, which has an average annual temperature of 30°C. Solar pipes can increase 33% daylight levels into the areas located on the upper floors of the building. In the case of the green roofs, the simulated results show that these reduces of nearly 31% of the internal heat gains through the roof, as well as a decrease in energy consumption related to air conditioning of 5% for some areas on the fourth and fifth floor. The estimated energy consumption of the building was 69 283 kWh per year.

The methodology for the evaluation of the energy saving by the daylight saving time in Mexico; Metodologia para la evaluacion del ahorro de energia debido al cambio de horario durante la epoca del verano

Energy Technology Data Exchange (ETDEWEB)

Ramos Niembro, Gaudencio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

A description is made of the methodology for the evaluation of energy saving by the daylight saving time in Mexico. A mathematical model was developed that would allow the quantitative evaluation of the energy saving by the daylight saving time, through measurements of the consumption of different users from the domestic commercial and industrial sector, considering the various variables that impact the consumption [Espanol] Se describe la metodologia para la evalucion del ahorro de energia por el cambio de horario de verano en Mexico. Se desarrollo un modelo matematico que permitiera evaluar cuantitativamente el ahorro de energia debido al cambio de horario durante la epoca de verano, atraves de mediciones de consumos de los diferentes usuarios de los sectores domestico, comercial e industrial, considerando las diversas variables que impactan en el consumo

The methodology for the evaluation of the energy saving by the daylight saving time in Mexico; Metodologia para la evaluacion del ahorro de energia debido al cambio de horario durante la epoca del verano

Energy Technology Data Exchange (ETDEWEB)

Ramos Niembro, Gaudencio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

A description is made of the methodology for the evaluation of energy saving by the daylight saving time in Mexico. A mathematical model was developed that would allow the quantitative evaluation of the energy saving by the daylight saving time, through measurements of the consumption of different users from the domestic commercial and industrial sector, considering the various variables that impact the consumption [Espanol] Se describe la metodologia para la evalucion del ahorro de energia por el cambio de horario de verano en Mexico. Se desarrollo un modelo matematico que permitiera evaluar cuantitativamente el ahorro de energia debido al cambio de horario durante la epoca de verano, atraves de mediciones de consumos de los diferentes usuarios de los sectores domestico, comercial e industrial, considerando las diversas variables que impactan en el consumo

An Agenda for Designing Natural Interaction in a Museum Context

DEFF Research Database (Denmark)

Lund, Morten

2012-01-01

to the design of digitally based interaction. The digital nature of these technologies enables convergense and new combinations of existing objects and contexts, but also the establishment of new objects and contexts. This potential of digital technologies is very well illustrated by the Multiverse model...

Design for Natural Breast Augmentation: The ICE Principle.

Science.gov (United States)

Mallucci, Patrick; Branford, Olivier Alexandre

2016-06-01

The authors' published studies have helped define breast beauty in outlining key parameters that contribute to breast attractiveness. The "ICE" principle puts design into practice. It is a simplified formula for inframammary fold incision planning as part of the process for determining implant selection and placement to reproduce the 45:55 ratio previously described as fundamental to natural breast appearance. The formula is as follows: implant dimensions (I) - capacity of the breast (C) = excess tissue required (E). The aim of this study was to test the accuracy of the ICE principle for producing consistent natural beautiful results in breast augmentation. A prospective analysis of 50 consecutive women undergoing primary breast augmentation by means of an inframammary fold incision with anatomical or round implants was performed. The ICE principle was applied to all cases to determine implant selection, placement, and incision position. Changes in parameters between preoperative and postoperative digital clinical photographs were analyzed. The mean upper pole-to-lower pole ratio changed from 52:48 preoperatively to 45:55 postoperatively (p principle for surgical planning in breast augmentation that attractive natural breasts may be achieved consistently and with precision. Therapeutic, IV.

Design in the natural stone transformation sector: evaluating a new concept

Directory of Open Access Journals (Sweden)

Susana Paixão-Barradas

2012-09-01

Full Text Available The European natural stone sector is declining; sales and imports are decreasing, owing to growing competition from Asiatic countries concerning the diversity of low-cost materials and European cultural and historical traditions demanding a commitment to invest in the best equipment and technology available. Design plays an important role in a company regarding the development, innovation and creation of competitive products. The present research involved a questionnaire being given to Portuguese and Spanish companies working in the natural stone sector to ascertain the companies’ characteristics, identifying those working with internal departments specialising in innovation for developing new products and studying the feasibility of working with a new concept by studying the relationship between these companies and the importance they attach to the sensation of well-being which a natural stone product offers. The results showed that companies recognised most feelings presented here as being ‘important’, mainly those referring to social factors. It could be concluded that a company working with an internal design department for product development appreciates such concepts and adds more value to them.

Climate Responsive Design Simulation and Modelling for Industrial Heritage

Directory of Open Access Journals (Sweden)

Manuel V. Castilla

2018-01-01

Full Text Available The control of solar radiation is a basic dimension of modern design in all different types of constructions. Many architects have recently observed that different phases of sustainable design require a set of calculations and simulations that are necessary as a new standard design. The valuable contributions to the process of sustainable design has a common denominator: solar radiation and comfort. In this way, motivated by all these new strategies and concepts, the large number of papers published suggests that the work has not been finished. This work provides an illustration of the Atarazanas regarding its climate responsiveness, focusing specifically on daylighting, shading, heat gain, and cooling loads. The objective is to assess the design of the Reales Atarazanas de Sevilla (Seville Royal Dockyards to quantify how it is impacted by solar insolation and to provide insights about design characteristics that influence efficiency and conservation.

How to Frame Universal Workspace Lighting

DEFF Research Database (Denmark)

Mathiasen, Nanet; Frandsen, Anne Kathrine

2016-01-01

; regardless of disability everybody should be able to move around in the house and work in any of the offices. One, of many ambitions, was to design a functional and effective lighting scheme using as much daylight as possible, and integrating the artificial lighting design and daylight design. The lighting...

From Natural to Design River Deltas

Science.gov (United States)

Giosan, Liviu

2016-04-01

Productive and biologically diverse, deltaic lowlands attracted humans since prehistory and may have spurred the emergence of the first urban civilizations. Deltas continued to be an important nexus for economic development across the world and are currently home for over half a billion people. But recently, under the double whammy of sea level rise and inland sediment capture behind dams, they have become the most threatened coastal landscape. Here I will address several deceptively simple questions to sketch some unexpected answers using example deltas from across the world from the Arctic to the Tropics, from the Danube to the Indus, Mississippi to Godavari and Krishna, Mackenzie to Yukon. What is a river delta? What is natural and what is not in a river delta? Are the geological and human histories of a delta important for its current management? Is maintaining a delta the same to building a new one? Can we design better deltas than Nature? These answers help us see clearly that survival of deltas in the next century depends on human intervention and is neither assured nor simple to address or universally applicable. Empirical observations on the hydrology, geology, biology and biochemistry of deltas are significantly lagging behind modeling capabilities endangering the applicability of numerical-based reconstruction solutions and need to be ramped up significantly and rapidly across the world.

Emission reductions through precombustion chamber design in a natural gas, lean burn engine

International Nuclear Information System (INIS)

Crane, M.E.; King, S.R.

1992-01-01

A study was conducted to evaluate the effects of various precombustion chamber design, operating and control parameters on the exhaust emissions of a natural gas engine. Analysis of the results showed that engine-out total hydrocarbons and oxides of nitrogen (NO x ) can be reduced, relative to conventional methods, through prechamber design. More specifically, a novel staged prechamber yielded significant reductions in NO x and total hydrocarbon emissions by promoting stable prechamber and main chamber ignition under fuel-lean conditions. Precise fuel control was also critical when balancing low emissions and engine efficiency (i.e., fuel economy). The purpose of this paper is to identify and explain positive and deleterious effects of natural gas prechamber design on exhaust emissions

Effects of photoperiod and melatonin implants on feed intake in Atlantic salmon (Salmo salar L. postsmolts

Directory of Open Access Journals (Sweden)

Silvia Maiolo

2015-12-01

Full Text Available High melatonin concentrations were expected to negatively affect Atlantic salmon appetite. Hence, individually kept Atlantic salmon postsmolts were subjected to continuous light (24:0, L:L or natural daylight (12:12, L:D and then given intraperitoneal implants of slow release melatonin in a 2 by 2 factorial design. Possible effects on food intake were monitored over three weeks. In addition, a plasma melatonin assessment test was run in parallel to monitor diurnal blood levels of melatonin through the trial. The surgical intervention was effective, leading to a 10x increase in mean melatonin levels when compared to control fish, but neither the implant nor the change in daylight had any significant effect on feed intake, at least in the short term.

Implications of longitude and latitude on the size of solar-powered UAV

International Nuclear Information System (INIS)

Rajendran, Parvathy; Smith, Howard

2015-01-01

Highlights: • We studied solar irradiance and daylight implication on solar-powered UAV design. • We explored for perpetual UAV flight for 12 cities around the world. • All year round solar-powered UAV operation possible for cities near equatorial line. • Cities in latitudes of ±35° are the optimal for solar-powered UAV. • Longitudinal coordinates and elevation have a minor effect on UAV design. - Abstract: The implication of solar irradiance and daylight duration on the design of a small solar-powered unmanned aerial vehicle (UAV) that is capable of operating perpetually in various cities around the world was investigated. Solar data in 2013 on 12 cities distributed around the world was collected. The effects of the available solar irradiance and daylight of the city on the maximum take-off weight and wing span of a small solar-powered UAV were studied. The analysis indicates that daylight duration is as important as the available solar irradiance to the performance of the solar-powered UAV. Longitudinal coordinates and elevation have a minor effect on the estimation of daylight duration. Areas considerably high in solar irradiance and daylight duration are more conducive to the effective performance of solar-powered UAVs than other areas. Therefore, cities closer to the equator have an advantage in utilizing solar-powered UAVs; where smaller and lighter solar-powered UAV can be designed

Vision in the deep sea.

Science.gov (United States)

Warrant, Eric J; Locket, N Adam

2004-08-01

The deep sea is the largest habitat on earth. Its three great faunal environments--the twilight mesopelagic zone, the dark bathypelagic zone and the vast flat expanses of the benthic habitat--are home to a rich fauna of vertebrates and invertebrates. In the mesopelagic zone (150-1000 m), the down-welling daylight creates an extended scene that becomes increasingly dimmer and bluer with depth. The available daylight also originates increasingly from vertically above, and bioluminescent point-source flashes, well contrasted against the dim background daylight, become increasingly visible. In the bathypelagic zone below 1000 m no daylight remains, and the scene becomes entirely dominated by point-like bioluminescence. This changing nature of visual scenes with depth--from extended source to point source--has had a profound effect on the designs of deep-sea eyes, both optically and neurally, a fact that until recently was not fully appreciated. Recent measurements of the sensitivity and spatial resolution of deep-sea eyes--particularly from the camera eyes of fishes and cephalopods and the compound eyes of crustaceans--reveal that ocular designs are well matched to the nature of the visual scene at any given depth. This match between eye design and visual scene is the subject of this review. The greatest variation in eye design is found in the mesopelagic zone, where dim down-welling daylight and bio-luminescent point sources may be visible simultaneously. Some mesopelagic eyes rely on spatial and temporal summation to increase sensitivity to a dim extended scene, while others sacrifice this sensitivity to localise pinpoints of bright bioluminescence. Yet other eyes have retinal regions separately specialised for each type of light. In the bathypelagic zone, eyes generally get smaller and therefore less sensitive to point sources with increasing depth. In fishes, this insensitivity, combined with surprisingly high spatial resolution, is very well adapted to the

Novel modular natural circulation BWR design and safety evaluation

International Nuclear Information System (INIS)

Ishii, Mamoru; Shi, Shanbin; Yang, Won Sik; Wu, Zeyun; Rassame, Somboon; Liu, Yang

2015-01-01

Highlights: • Introduction of BWR-type natural circulation small modular reactor preliminary design (NMR-50). • Design of long fuel cycle length for the NMR-50. • Design of double passive safety systems for the NMR-50. • RELAP5 analyses of design basis accidents for the NMR-50. - Abstract: The Purdue NMR (Novel Modular Reactor) represents a BWR-type small modular reactor with a significantly reduced reactor pressure vessel (RPV) height. Specifically, it has one third the height of a conventional BWR RPV with an electrical output of 50 MWe. The preliminary design of the NMR-50 including reactor, fuel cycle, and safety systems is described and discussed. The improved neutronics design of the NMR-50 extends the fuel cycle length up to 10 years. The NMR-50 is designed with double passive engineering safety system, which is intended to withstand a prolonged station black out with loss of ultimate heat sink accident such as experienced at Fukushima. In order to evaluate the safety features of the NMR-50, two representative design basis accidents, i.e. main steam line break (MSLB) and bottom drain line break (BDLB), are simulated by using the best-estimate thermal–hydraulic code RELAP5. The RPV water inventory, containment pressure, and the performance of engineering safety systems are investigated for about 33 h after the initiation of the accidents

Simulation-Optimization Framework for Synthesis and Design of Natural Gas Downstream Utilization Networks

Directory of Open Access Journals (Sweden)

Saad A. Al-Sobhi

2018-02-01

Full Text Available Many potential diversification and conversion options are available for utilization of natural gas resources, and several design configurations and technology choices exist for conversion of natural gas to value-added products. Therefore, a detailed mathematical model is desirable for selection of optimal configuration and operating mode among the various options available. In this study, we present a simulation-optimization framework for the optimal selection of economic and environmentally sustainable pathways for natural gas downstream utilization networks by optimizing process design and operational decisions. The main processes (e.g., LNG, GTL, and methanol production, along with different design alternatives in terms of flow-sheeting for each main processing unit (namely syngas preparation, liquefaction, N2 rejection, hydrogen, FT synthesis, methanol synthesis, FT upgrade, and methanol upgrade units, are used for superstructure development. These processes are simulated using ASPEN Plus V7.3 to determine the yields of different processing units under various operating modes. The model has been applied to maximize total profit of the natural gas utilization system with penalties for environmental impact, represented by CO2eq emission obtained using ASPEN Plus for each flowsheet configuration and operating mode options. The performance of the proposed modeling framework is demonstrated using a case study.

Periodic table of virus capsids: implications for natural selection and design.

Science.gov (United States)

Mannige, Ranjan V; Brooks, Charles L

2010-03-04

For survival, most natural viruses depend upon the existence of spherical capsids: protective shells of various sizes composed of protein subunits. So far, general evolutionary pressures shaping capsid design have remained elusive, even though an understanding of such properties may help in rationally impeding the virus life cycle and designing efficient nano-assemblies. This report uncovers an unprecedented and species-independent evolutionary pressure on virus capsids, based on the the notion that the simplest capsid designs (or those capsids with the lowest "hexamer complexity", C(h)) are the fittest, which was shown to be true for all available virus capsids. The theories result in a physically meaningful periodic table of virus capsids that uncovers strong and overarching evolutionary pressures, while also offering geometric explanations to other capsid properties (rigidity, pleomorphy, auxiliary requirements, etc.) that were previously considered to be unrelatable properties of the individual virus. Apart from describing a universal rule for virus capsid evolution, our work (especially the periodic table) provides a language with which highly diverse virus capsids, unified only by geometry, may be described and related to each other. Finally, the available virus structure databases and other published data reiterate the predicted geometry-derived rules, reinforcing the role of geometry in the natural selection and design of virus capsids.

Atomic switch networks-nanoarchitectonic design of a complex system for natural computing.

Science.gov (United States)

Demis, E C; Aguilera, R; Sillin, H O; Scharnhorst, K; Sandouk, E J; Aono, M; Stieg, A Z; Gimzewski, J K

2015-05-22

Self-organized complex systems are ubiquitous in nature, and the structural complexity of these natural systems can be used as a model to design new classes of functional nanotechnology based on highly interconnected networks of interacting units. Conventional fabrication methods for electronic computing devices are subject to known scaling limits, confining the diversity of possible architectures. This work explores methods of fabricating a self-organized complex device known as an atomic switch network and discusses its potential utility in computing. Through a merger of top-down and bottom-up techniques guided by mathematical and nanoarchitectonic design principles, we have produced functional devices comprising nanoscale elements whose intrinsic nonlinear dynamics and memorization capabilities produce robust patterns of distributed activity and a capacity for nonlinear transformation of input signals when configured in the appropriate network architecture. Their operational characteristics represent a unique potential for hardware implementation of natural computation, specifically in the area of reservoir computing-a burgeoning field that investigates the computational aptitude of complex biologically inspired systems.

Quantifying the radiant exposure and effective dose in patients treated for actinic keratoses with topical photodynamic therapy using daylight and LED white light

Science.gov (United States)

Manley, M.; Collins, P.; Gray, L.; O'Gorman, S.; McCavana, J.

2018-02-01

Daylight photodynamic therapy (dl-PDT) is as effective as conventional PDT (c-PDT) for treating actinic keratoses but has the advantage of reducing patient discomfort significantly. Topical dl-PDT and white light-PDT (wl-PDT) differ from c-PDT by way of light sources and methodology. We measured the variables associated with light dose delivery to skin surface and influence of geometry using a radiometer, a spectral radiometer and an illuminance meter. The associated errors of the measurement methods were assessed. The spectral and spatial distribution of the radiant energy from the LED white light source was evaluated in order to define the maximum treatment area, setup and treatment protocol for wl-PDT. We compared the data with two red LED light sources we use for c-PDT. The calculated effective light dose is the product of the normalised absorption spectrum of the photosensitizer, protoporphyrin IX (PpIX), the irradiance spectrum and the treatment time. The effective light dose from daylight ranged from 3  ±  0.4 to 44  ±  6 J cm-2due to varying weather conditions. The effective light dose for wl-PDT was reproducible for treatments but it varied across the treatment area between 4  ±  0.1 J cm-2 at the edge and 9  ±  0.1 J cm-2 centrally. The effective light dose for the red waveband (615-645 nm) was 0.42  ±  0.05 J cm-2 on a clear day, 0.05  ±  0.01 J cm-2 on an overcast day and 0.9  ±  0.01 J cm-2 using the white light. This compares with 0.95  ±  0.01 and 0.84  ±  0.01 J cm-2 for c-PDT devices. Estimated errors associated with indirect determination of daylight effective light dose were very significant, particularly for effective light doses less than 5 J cm-2 (up to 83% for irradiance calculations). The primary source of error is in establishment of the relationship between irradiance or illuminance and effective dose. Use of the O’Mahoney model is recommended using a

Design of two-channel filter bank using nature inspired optimization based fractional derivative constraints.

Science.gov (United States)

Kuldeep, B; Singh, V K; Kumar, A; Singh, G K

2015-01-01

In this article, a novel approach for 2-channel linear phase quadrature mirror filter (QMF) bank design based on a hybrid of gradient based optimization and optimization of fractional derivative constraints is introduced. For the purpose of this work, recently proposed nature inspired optimization techniques such as cuckoo search (CS), modified cuckoo search (MCS) and wind driven optimization (WDO) are explored for the design of QMF bank. 2-Channel QMF is also designed with particle swarm optimization (PSO) and artificial bee colony (ABC) nature inspired optimization techniques. The design problem is formulated in frequency domain as sum of L2 norm of error in passband, stopband and transition band at quadrature frequency. The contribution of this work is the novel hybrid combination of gradient based optimization (Lagrange multiplier method) and nature inspired optimization (CS, MCS, WDO, PSO and ABC) and its usage for optimizing the design problem. Performance of the proposed method is evaluated by passband error (ϕp), stopband error (ϕs), transition band error (ϕt), peak reconstruction error (PRE), stopband attenuation (As) and computational time. The design examples illustrate the ingenuity of the proposed method. Results are also compared with the other existing algorithms, and it was found that the proposed method gives best result in terms of peak reconstruction error and transition band error while it is comparable in terms of passband and stopband error. Results show that the proposed method is successful for both lower and higher order 2-channel QMF bank design. A comparative study of various nature inspired optimization techniques is also presented, and the study singles out CS as a best QMF optimization technique. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Design of a naturalized flow regime—An example from the Lower Missouri River, USA

Science.gov (United States)

Jacobson, Robert B.; Galat, David L.

2008-01-01

 group of river managers, stakeholders, and scientists met during summer 2005 to design a more naturalized flow regime for the Lower Missouri River (LMOR). The objective was to comply with requirements under the U.S. Endangered Species Act to support reproduction and survival of threatened and endangered species, with emphasis on the endangered pallid sturgeon (Scaphirhynchus albus), while minimizing negative effects to existing social and economic benefits of prevailing river management. Specific hydrograph requirements for pallid sturgeon reproduction are unknown, hence much of the design process was based on features of the natural flow regime. Environmental flow components (EFCs) extracted from the reference natural flow regime were used to design and assess performance of alternative flow regimes.The design process incorporated a primary stage in which conceptual hydrographs were developed and assessed for their general ecological and social-economic performance. The second stage accounted for hydroclimatic variation by coding the conceptual hydrographs into reservoir release rules, adding constraints for downstream flooding and low-storage precludes, and running the rules through 100 years of hydroclimatic simulation. The output flow regimes were then evaluated for presumed ecological benefits based on how closely they resembled EFCs in the reference natural flow regime. Flow regimes also were assessed for social-economic cost indicators, including days of flooding of low-lying agricultural land, days over flood stage, and storage levels in system reservoirs.Our experience with flow-regime design on the LMOR underscored the lack of confidence the stakeholders place in the value of the natural flow regime as a measure of ecosystem benefit in the absence of fundamental scientific documentation. Stakeholders desired proof of ecological benefits commensurate with the certainty of economic losses. We also gained insight into the processes of integrating science

Ceramic Prototypes – Design, Computation, and Digital Fabrication

Directory of Open Access Journals (Sweden)

M. Bechthold

2016-12-01

Full Text Available Research in ceramic material systems at Harvard University has introduced a range of novel applications which combine digital manufacturing technologies and robotics with imaginative design and engineering methods. Prototypes showcase the new performative qualities of ceramics and the integration of this material in today’s construction culture. Work ranges from daylight control systems to structural applications and a robotic tile placement system. Emphasis is on integrating novel technologies with tried and true manufacturing methods. The paper describes two distinct studies – one on 3D print-ing of ceramics, the other on structural use of large format thin tiles.

Nature-inspired design strategies in sustainable product development : A case study of student projects

NARCIS (Netherlands)

De Pauw, I.C.; Karana, E.; Kandachar, P.V.

2012-01-01

In design practice, Nature-Inspired Design Strategies (NIDS) can be applied when developing sustainable products. However, knowledge on how this actually helps designers is lacking. This study explores the effects of applying Cradle to Cradle and Biomimicry in student projects, as compared to using

Tips for daylighting with windows

Energy Technology Data Exchange (ETDEWEB)

Robinson, Alastair [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Selkowitz, Stephen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2013-10-01

These guidelines provide an integrated approach to the cost-effective design of perimeter zones in new commercial buildings and existing building retrofits. They function as a quick reference for building designers, through a set of easy steps and rules-of-thumb, emphasizing “how-to” practical details. References are given to more detailed sources of information, should the reader wish to go further. The design method used in this document emphasizes that building decisions should be made within the context of the whole building as a single functioning system rather than as an assembly of distinct parts. This integrated design approach looks at the ramifications of each individual system decision on the whole building. For example, the decision on glazing selection will have an effect on lighting, mechanical systems, and interior design. Therefore, the entire design team should participate and influence this glazing decision—which typically rests with the architect alone. The benefit of an integrated design approach is a greater chance of success towards long-term comfort and sustained energy savings in the building.

In silico Design of "Un-Natural" Natural Products

Directory of Open Access Journals (Sweden)

Zucko; J. ...(et al.

2008-05-01

ClustScan, which are under development to model these processes in silico. The heart of CompGen is a specially structured database, based on BioSQL v1.29, which connects the biosynthetic order of synthase/synthetase enzymes to the sequences of the component polypeptides. The additional linkage to the gene sequences allows the integration of DNA sequence with product structure. The database contains sequences of the well-characterised PKS/NRPS clusters, and non-annotated sequenced clusters whose structure and functionis yet unknown, to act as building blocks for the production of novel products. It is easy to add custom sequences to the database and to annotate them by the use of propriety protein profiles designed by Pfam database and HMMER. One function of the program is the ability to generate virtual recombinants between clusters. This can be done using a recombination model (with optional parameters to predict sites for homologous recombination or by user defined recombination sites (e.g. to model in vitro genetic manipulation such as module replacement. The program predicts the linear polyketide structure of the resulting "un-natural" natural products with a chemical description using isomeric SMILES. Molecular modelling of the subsequent spontaneous cyclisation process produces structures for a virtual compound database for further molecular modelling studies using PASS and CDD technology. An optional "reverse genetics" module analyses a given chemical structure to see if it could be produced by a novel PKS/NRPS synthesis cluster and suggests the DNA sequence of a suitable cluster based on building blocks derived from clusters contained in the database.Overall, the CompGen allows in silico generation of the database of novel "un-natural" natural chemical compounds that can be used for in silico screening using PASS or CDD technology. The other integral generic program package, ClustScan, will recognise and annotate new gene clusters from microbial genome

Sustainable Building in China -- A Green Leap Forward?

Energy Technology Data Exchange (ETDEWEB)

Diamond, Richard [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ye, Qing [Shenzhen Inst. of Building Research (China); Feng, Wei [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yan, Tao [Shenzhen Inst. of Building Research (China); Mao, Hongwei [Shenzhen Inst. of Building Research (China); Li, Yutong [Shenzhen Inst. of Building Research (China); Guo, Yongcong [Shenzhen Inst. of Building Research (China); Wang, Jialiang [Shenzhen Inst. of Building Research (China)

2013-09-01

China is constructing new commercial buildings at an enormous rate -- roughly 2 billion square meters per year, with considerable interest and activity in green design and construction. We review the context of commercial building design and construction in China, and look at a specific project as an example of a high performance, sustainable design, the Shenzhen Institute of Building Research (IBR). The IBR building incorporates over 40 sustainable technologies and strategies, including daylighting, natural ventilation, gray-water recycling, solar-energy generation, and highly efficient Heating Ventilation and Air Conditioning (HVAC) systems. We present measured data on the performance of the building, including detailed analysis by energy end use, water use, and occupant comfort and satisfaction. Total building energy consumption in 2011 was 1151 MWh, with an Energy Use Intensity (EUI) of 63 kWh/m² (20 kBtu/ft²), which is 61% of the mean EUI value of 103 kWh/m² (33 kBtu/ft²) for similar buildings in the region. We also comment on the unique design process, which incorporated passive strategies throughout the building, and has led to high occupant satisfaction with the natural ventilation, daylighting, and green patio work areas. Lastly we present thoughts on how the design philosophy of the IBR building can be a guide for low-energy design in different climate regions throughout China and elsewhere.

Dynamic light as a transformational tool in computer-aided design

DEFF Research Database (Denmark)

Hansen, Ellen Kathrine; Mullins, Michael Finbarr; Triantafyllidis, Georgios

2016-01-01

area close to the city center, from its traditional religious functions to a more dynamic, contemporary and multifunctional space, using light as the main design element. The initial question asked in this context is therefore ‘how light can transform the interior space of the de-sanctified church...... simulations of daylight and the smart-film diffuser were essential to study the design potentials of the double interior skin, appropriate to the three phases in the ceremonial space. 3. Transform. The findings from the experiments are transformed into a design solution using 3D models and simulations...... be applied to meet human biological, psychological and physiological needs. The implementation of these technologies transforms the functional split between engineers, technologists and architects into a complex transdisciplinary design process. A criterion for success of this endeavor will be, as Herbert...

ESBWR - Robust design for natural circulation and stability performance effectiveness

Energy Technology Data Exchange (ETDEWEB)

Alamgir, M. D.; Marquino, W.; Yang, J.; Saha, P.; Fennern, L.; Colby, M. [GE-Hitachi Nuclear Energy, M/C A65, 3901Castle Hayne Road, Wilmington, NC 28401 (United States)

2012-07-01

ESBWR is a 4500 MWt Generation III+ natural circulation reactor with an array of robust design features and passive safety systems to deliver highly effective plant performance during normal operation and to keep the reactor safe during postulated transients and accidents. With the submittal of the latest revision of the Design Control Document (DCD) to US Nuclear Regulatory Commission, ESBWR is nearing the completion of the US design certification process. This paper focuses on the natural circulation-driven plant performance aspects during normal operation, and stability evaluation of the robust ESBWR design. The TRACG computer code is used for the analysis of ESBWR plant performance, safety analysis, and stability margins. The paper describes the evaluation of ESBWR stability performance during normal power operation including operation in the Core Power-Feed Water Temperature Operating Domain. For ESBWR the normal power operation condition has the highest power/flow ratio and is limiting from the perspective of stability. The paper includes results from detailed evaluation of the most limiting decay ratio for out-of-phase regional oscillations calculated by perturbing the core inlet flow rate in this out-of-phase mode about the line of symmetry for the azimuthal harmonic mode. The paper also summarizes the ESBWR regional mode stability evaluations during a limiting transient (Loss of Feedwater Heating), and during ATWS (Anticipated Transient without Scram). Nominal decay ratios of limiting Channel oscillation, Core wide oscillation and Regional oscillation are within the maximum acceptance criterion of 0.8, at 95% content and 95% confidence. These stability evaluation results indicate decay ratio is within design limits. The paper also describes the evaluation of ESBWR stability performance during plant startup, and summarizes the defense-in-depth stability solution for ESBWR. (authors)

ESBWR - Robust design for natural circulation and stability performance effectiveness

International Nuclear Information System (INIS)

Alamgir, M. D.; Marquino, W.; Yang, J.; Saha, P.; Fennern, L.; Colby, M.

2012-01-01

ESBWR is a 4500 MWt Generation III+ natural circulation reactor with an array of robust design features and passive safety systems to deliver highly effective plant performance during normal operation and to keep the reactor safe during postulated transients and accidents. With the submittal of the latest revision of the Design Control Document (DCD) to US Nuclear Regulatory Commission, ESBWR is nearing the completion of the US design certification process. This paper focuses on the natural circulation-driven plant performance aspects during normal operation, and stability evaluation of the robust ESBWR design. The TRACG computer code is used for the analysis of ESBWR plant performance, safety analysis, and stability margins. The paper describes the evaluation of ESBWR stability performance during normal power operation including operation in the Core Power-Feed Water Temperature Operating Domain. For ESBWR the normal power operation condition has the highest power/flow ratio and is limiting from the perspective of stability. The paper includes results from detailed evaluation of the most limiting decay ratio for out-of-phase regional oscillations calculated by perturbing the core inlet flow rate in this out-of-phase mode about the line of symmetry for the azimuthal harmonic mode. The paper also summarizes the ESBWR regional mode stability evaluations during a limiting transient (Loss of Feedwater Heating), and during ATWS (Anticipated Transient without Scram). Nominal decay ratios of limiting Channel oscillation, Core wide oscillation and Regional oscillation are within the maximum acceptance criterion of 0.8, at 95% content and 95% confidence. These stability evaluation results indicate decay ratio is within design limits. The paper also describes the evaluation of ESBWR stability performance during plant startup, and summarizes the defense-in-depth stability solution for ESBWR. (authors)

Investigation on Smoke Movement and Smoke Control for Atrium in Green and Sustainable Buildings

OpenAIRE

Fang, Lui; Nielsen, Peter V.; Brohus, Henrik

2007-01-01

 The concepts of green buildings and sustainable buildings are promoted actively in the developed countries. Targets are on protecting the environment, using less energy through natural ventilation provisions and daylight utilization, developing better waste management and taking resource conservation into account. Architectural and building design, electrical and mechanical systems, and building management have to be upgraded. However, there are problems in dealing with fire safety, especial...

Consistent natural phenomena design and evaluation guidelines for U.S. Department of Energy facilities

International Nuclear Information System (INIS)

Murray, R.C.; Short, S.A.

1989-01-01

Uniform design and evaluation guidelines for protection against natural phenomena hazards such as earthquakes, extreme winds, and flooding for facilities at Department of Energy (DOE) sites throughout the United States have been developed. The guidelines apply to design of new facilities and to evaluation or modification of existing facilities. These guidelines are an approach for design or evaluation for mitigating the effects of natural phenomena hazards. These guidelines are intended to control the level of conservatism introduced in the design/evaluation process such that all hazards are treated on a reasonably consistent and uniform basis and such that the level of conservatism is appropriate for facility characteristics such as importance, cost, and hazards to on-site personnel, the general public, and the environment. The philosophy and goals of these guidelines are covered by this paper

Design and Analysis of an Optical Coupler for Concentrated Solar Light Using Optical Fibers in Residential Buildings

Directory of Open Access Journals (Sweden)

Afshin Aslian

2016-01-01

Full Text Available Concentrated sunlight that is transmitted by fiber optics has been used for generating electricity, heat, and daylight. On the other hand, multijunction photovoltaic cells provide high efficiency for generating electricity from highly concentrated sunlight. This study deals with designing and simulating a high-efficiency coupler, employing a mathematical model to connect sunlight with fiber optics for multiple applications. The coupler concentrates and distributes irradiated light from a primary concentrator. In this study, a parabolic dish was used as the primary concentrator, a coupler that contains nine components called a compound truncated pyramid and a cone (CTPC, all of which were mounted on a plate. The material of both the CTPC and the plate was BK7 optical glass. Fiber optics cables and multijunction photovoltaic cells were connected to the cylindrical part of the CTPC. The fibers would transmit the light to the building to provide heat and daylight, whereas multijunction photovoltaic cells generate electricity. Theoretical and simulation results showed high performance of the designed coupler. The efficiency of the coupler was as high as 92%, whereas the rim angle of the dish increased to an optimum angle. Distributed sunlight in the coupler increased the flexibility and simplicity of the design, resulting in a system that provided concentrated electricity, heat, and lighting for residential buildings.

Highlighting High Performance: Clearview Elementary School, Hanover, Pennsylvania

Energy Technology Data Exchange (ETDEWEB)

2002-08-01

Case study on high performance building features of Clearview Elementary School in Hanover, Pennsylvania. Clearview Elementary School in Hanover, Pennsylvania, is filled with natural light, not only in classrooms but also in unexpected, and traditionally dark, places like stairwells and hallways. The result is enhanced learning. Recent scientific studies conducted by the California Board for Energy Efficiency, involving 21,000 students, show test scores were 15% to 26% higher in classrooms with daylighting. Clearview's ventilation system also helps students and teachers stay healthy, alert, and focused on learning. The school's superior learning environment comes with annual average energy savings of about 40% over a conventional school. For example, with so much daylight, the school requires about a third less energy for electric lighting than a typical school. The school's innovative geothermal heating and cooling system uses the constant temperature of the Earth to cool and heat the building. The building and landscape designs work together to enhance solar heating in the winter, summer cooling, and daylighting all year long. Students and teachers have the opportunity to learn about high-performance design by studying their own school. At Clearview, the Hanover Public School District has shown that designing a school to save energy is affordable. Even with its many innovative features, the school's $6.35 million price tag is just $150,000 higher than average for elementary schools in Pennsylvania. Projected annual energy cost savings of approximately $18,000 mean a payback in 9 years. Reasonable construction costs demonstrate that other school districts can build schools that conserve energy, protect natural resources, and provide the educational and health benefits that come with high-performance buildings.

Atomic switch networks—nanoarchitectonic design of a complex system for natural computing

International Nuclear Information System (INIS)

Demis, E C; Aguilera, R; Sillin, H O; Scharnhorst, K; Sandouk, E J; Gimzewski, J K; Aono, M; Stieg, A Z

2015-01-01

Self-organized complex systems are ubiquitous in nature, and the structural complexity of these natural systems can be used as a model to design new classes of functional nanotechnology based on highly interconnected networks of interacting units. Conventional fabrication methods for electronic computing devices are subject to known scaling limits, confining the diversity of possible architectures. This work explores methods of fabricating a self-organized complex device known as an atomic switch network and discusses its potential utility in computing. Through a merger of top-down and bottom-up techniques guided by mathematical and nanoarchitectonic design principles, we have produced functional devices comprising nanoscale elements whose intrinsic nonlinear dynamics and memorization capabilities produce robust patterns of distributed activity and a capacity for nonlinear transformation of input signals when configured in the appropriate network architecture. Their operational characteristics represent a unique potential for hardware implementation of natural computation, specifically in the area of reservoir computing—a burgeoning field that investigates the computational aptitude of complex biologically inspired systems. (paper)

The Green Studio Handbook: Environmental Strategies for Schematic Design

Directory of Open Access Journals (Sweden)

Alison G. Kwok

2012-11-01

Full Text Available In design studio projects we often see schemes with inspired, yet unvalidated, gestural sketches related to wishful green strategies. Yellow and blue magic arrows represent hypotheses about the behavior of daylight and/or air flow in and about buildings. This paper provides an overview of The Green Studio Handbook, recently published as a resource for designers seeking clear guidelines for integrating green design strategies into the conceptual and schematic phases of design. The book contains a discussion of the integration of green strategies and how building form, orientation, and spatial layout are critical to the proper performance of certain green strategies; 40 green design strategies in six broad topic areas, each providing acatalog of information for common strategies that must be implemented at the schematic design phase; and nine case studies that show how various green strategies work together in a finished building. This paper provides excerpts of several design strategies and one case study and suggests a variety of ways that the book may be used.Keywords: green design, case studies, education, schematic design

Risk calculations for energy conservation technologies: the likelihood of realizing design-phase expectations in new construction

Energy Technology Data Exchange (ETDEWEB)

Greden, Lara; Vaidya, Prasad; Baker, Chris; Eijadi, David; McDougall, Tom [The Weidt Group (United States)

2007-07-01

The risk that a technology will not be implemented or operated as designed is a significant barrier that impedes owners from adopting new energy-conserving building technologies. This results in a feedback loop that encourages decision makers to minimize risk by sticking with the status quo, regardless of the environmental impact. Different technology categories have different levels and types of risks associated with them.This study assigns levels of risk to technologies by tracing a set of envelope systems, lighting designs, lighting controls, HVAC systems, and HVAC controls in a data set of 38 buildings from the design phase through the initial implementation phase. The likelihood that a technology gets implemented and works as expected is assessed, and risk factors for the various technologies are calculated. Explanations for the levels of risk are supported by interviews with third-party reviewers who serve to assist design teams and owners through the construction phase. Results show that daylighting technologies, including dimming daylighting controls, have the highest risk of not being implemented - when otherwise chosen at the selection phase - while roof insulation and lighting designs are most likely to be fully and correctly implemented. Analysis comparing the risk to the energy conservation opportunity indicates the need for prioritization and support during the design and construction phases to realize expected levels of energy conservation. Overall, the interviewees said the most common reasons for lower than expected energy savings are that energy conservation measures were cut-out during value engineering or cut-out due to later decisions that a technology was functionally risky. This research supports large scale investments in energy conservation technologies for buildings through rebate programs, code improvements, and design guides created by large owners. It identifies technologies that need a higher degree of building management effort and

An Attempt to Design a Naturally Ventilated Tower in Subtropical Climate of the Developing Country; Pakistan

Directory of Open Access Journals (Sweden)

Sohail Maha

2017-12-01

Full Text Available A large proportion of the world’s population resides in developing countries where there is a lack of rigorous studies in designing energy efficient buildings. This study is a step in designing a naturally ventilated high rise residential building in a tropical climatic context of the developing country, Pakistan. Karachi, the largest city of Pakistan, lies in the subtropical hot desert region with constant high temperature of average 32 °C throughout the summer and no particular winter season. The Design Builder software package is used to design a 25 storey high rise residential building relying primarily on natural ventilation. A final conceptual design is proposed after optimization of massing, geometry, orientation, and improved building envelope design including extensive shading devices in the form of trees. It has been observed that a reduction of 8 °C in indoor ambient temperature is possible to achieve with passive measures and use of night time ventilation. A fully naturally ventilated building can reduce the energy consumption for cooling and heating by 96 % compared to a building using air conditioning systems.

An Attempt to Design a Naturally Ventilated Tower in Subtropical Climate of the Developing Country; Pakistan

Science.gov (United States)

Sohail, Maha

2017-12-01

A large proportion of the world's population resides in developing countries where there is a lack of rigorous studies in designing energy efficient buildings. This study is a step in designing a naturally ventilated high rise residential building in a tropical climatic context of the developing country, Pakistan. Karachi, the largest city of Pakistan, lies in the subtropical hot desert region with constant high temperature of average 32 °C throughout the summer and no particular winter season. The Design Builder software package is used to design a 25 storey high rise residential building relying primarily on natural ventilation. A final conceptual design is proposed after optimization of massing, geometry, orientation, and improved building envelope design including extensive shading devices in the form of trees. It has been observed that a reduction of 8 °C in indoor ambient temperature is possible to achieve with passive measures and use of night time ventilation. A fully naturally ventilated building can reduce the energy consumption for cooling and heating by 96 % compared to a building using air conditioning systems.

Sustainable building with closed cavity facades. Top energy efficiency and more daylight; Nachhaltig bauen mit Closed Cavity Fassaden. Hoechste Energieeffizienz und mehr Tageslicht

Energy Technology Data Exchange (ETDEWEB)

Rudolf, Bernhard

2012-08-15

Facades have a key function within the sustainable construction since the energy conservation significantly depends on the building envelope. Beside an enhanced energy efficiency, the Green Building shall offer an improved utilization of day-lighting and comfortable indoor climatic conditions. Here, the innovative Closed Cavity Facade new standards. The former 'Poseidon building' in Frankfurt/Main (Federal Republic of Germany) and the multi-storey building of the Roche company in Basel (Switzerland) are equipped with this facade. The energy costs, operational costs as well as the maintenance costs are reduced sustainably using this closed bivalved facade.

NATURAL GAS HYDRATES STORAGE PROJECT PHASE II. CONCEPTUAL DESIGN AND ECONOMIC STUDY

Energy Technology Data Exchange (ETDEWEB)

R.E. Rogers

1999-09-27

DOE Contract DE-AC26-97FT33203 studied feasibility of utilizing the natural-gas storage property of gas hydrates, so abundantly demonstrated in nature, as an economical industrial process to allow expanded use of the clean-burning fuel in power plants. The laboratory work achieved breakthroughs: (1) Gas hydrates were found to form orders of magnitude faster in an unstirred system with surfactant-water micellar solutions. (2) Hydrate particles were found to self-pack by adsorption on cold metal surfaces from the micellar solutions. (3) Interstitial micellar-water of the packed particles were found to continue forming hydrates. (4) Aluminum surfaces were found to most actively collect the hydrate particles. These laboratory developments were the bases of a conceptual design for a large-scale process where simplification enhances economy. In the design, hydrates form, store, and decompose in the same tank in which gas is pressurized to 550 psi above unstirred micellar solution, chilled by a brine circulating through a bank of aluminum tubing in the tank employing gas-fired refrigeration. Hydrates form on aluminum plates suspended in the chilled micellar solution. A low-grade heat source, such as 110 F water of a power plant, circulates through the tubing bank to release stored gas. The design allows a formation/storage/decomposition cycle in a 24-hour period of 2,254,000 scf of natural gas; the capability of multiple cycles is an advantage of the process. The development costs and the user costs of storing natural gas in a scaled hydrate process were estimated to be competitive with conventional storage means if multiple cycles of hydrate storage were used. If more than 54 cycles/year were used, hydrate development costs per Mscf would be better than development costs of depleted reservoir storage; above 125 cycles/year, hydrate user costs would be lower than user costs of depleted reservoir storage.

Justification of Natural Lighting Management for Workplaces with Displays

Science.gov (United States)

Kudryashov, A. V.; Erunova, A. V.; Kalinina, A. S.

2017-11-01

The article is devoted to the study of the influence of the orientation of light apertures (windows) on the distribution of illumination in a room inside the workplaces equipped with displays. The measurements of natural light were carried out in two similar rooms, in the first room the windows are oriented to the north and in the second - to the south. The normative illumination value in a workplace equipped with a personal computer or display must be between 300 and 500 lux. However, during the daytime, the value of natural illumination at the workplace can exceed the normalized value by several times, and in the morning and evening hours is not sufficient. Such distribution of illumination involves the use a combined lighting control system (with daylight time control and switching on artificial lighting in the morning and evening hours). In the article it is justified that the orientation of the windows in the room does not have a significant effect on the distribution of illumination throughout the room which makes it possible not to take into account the restrictions concerning the orientation of the room’s light apertures when combined lighting control systems are used.

Daylight case study building. A working document of Task 21. Daylight in buildings

Energy Technology Data Exchange (ETDEWEB)

Kristensen, P E

1997-05-01

This report describes 16 buildings, that have been selected as Task 21 case studies. Totally 15 buildings will be monitored and described according to the procedures developed in Task 21. One case study building is in design stage, the new ISE Headquarters in Freiburg, and this project has been selected as a case study on building design. The monitoring programme for the buildings runs through 1997 until mid 1998. The present document serves as a basic document describing the case studies, until the projects will be described in more detail, including monitoring results, towards the end of the Task. (au)

Optimising for sun and light - the environmental performance of bio-climatic high-rise offices by Malaysian architect Kenneth Yeang

Energy Technology Data Exchange (ETDEWEB)

Ip, K.; Puteri Shireen Jahnkassim [University of Brighton (United Kingdom). School of the Environment

2000-07-01

Bioclimatic highrises represent an architectural response to the problem of regionalism in highrises and are based mainly on climate as a form determinant. They integrate sky courts, the use of vertical landscaping and vegetation, sun shading and use of natural ventilation in transitional areas such as the lift and ground floor lobbies. Sensitivity studies on bioclimatic highrises in tropical climate have shown that the use of daylight to save electric light and the optimum design of the building envelope can achieve significant energy savings by maintaining the balance between thermal and lighting requirements. In this study the overall envelope of two of Ken Yeang's highrise design, Menara Mesiniaga and Menara UMNO, are optimised with regards to the balance between the opposing impacts - daylight and solar gain. Apart from the external design features, the applications of photovoltaic systems to enhance the energy efficiency of these buildings are also investigated. The optimisation is carried out through the use of the FACET computer program that incorporates the use of dynamic thermal simulation program APACHE and lighting simulation RADIANCE. The paper concludes with the energy saving potential of bioclimatic design and limitations of the current study. (author)

Codes, standards, and requirements for DOE facilities: natural phenomena design

International Nuclear Information System (INIS)

Webb, A.B.

1985-01-01

The basic requirements for codes, standards, and requirements are found in DOE Orders 5480.1A, 5480.4, and 6430.1. The type of DOE facility to be built and the hazards which it presents will determine the criteria to be applied for natural phenomena design. Mandatory criteria are established in the DOE orders for certain designs but more often recommended guidance is given. National codes and standards form a great body of experience from which the project engineer may draw. Examples of three kinds of facilities and the applicable codes and standards are discussed. The safety program planning approach to project management used at Westinghouse Hanford is outlined. 5 figures, 2 tables

Towards green buildings: Glass as a building element-the use and misuse in the gulf region

Energy Technology Data Exchange (ETDEWEB)

Aboulnaga, Mohsen M. [College of Design and Applied Arts, Dubai University College, Dubai P.O. Box 14143 (United Arab Emirates)

2006-04-15

The recent economic growth in the Gulf region notably in Dubai, United Arab Emirates (UAE) has led to a colossal number of buildings that has been constructed in the past 5 years. In the last decade, a total glazed building's facades became the icon of Dubai. This large area of glazing in each facade needs protection against overheating and sun glare in summer. According to leader in energy and environmental design (LEED) glass selection becomes a main element in this equation to contribute towards achieving a green building. The aim of this paper is to investigate the problems associated with misuse of glass, as a building element in UAE particularly in Dubai. Inadequate design with ill-selected glass/glazing type may lead not only to poor daylighting in building interiors but also contribute significantly to fatigue, insomnia, seasonal affective disorder (SAD) and above all increase CO{sub 2} emission. The purpose of the study is to specify the required improvements to permit natural, 'free' daylight to filter through the building facade into interior space, especially with the right type of glass. This paper examines the status of buildings in Dubai in terms of glass type, visible light transmittance, reflection (out/in) and relative heat gain. A quantitative analysis is conducted to assess the impact of glass on the building users' performance in terms of daylight environment. A recent built high-rise office building was selected in the investigation to asses whether selected glass provide the recommended daylight factor (DF) and daylight level (DL) according to IES standards. The results revealed that most the glass/glazing was misused in 70% of buildings in intermediate and low performance groups. The DF and DD in the selected office building were unexpectedly tremendous and found far beyond the recommended level due to the use of spectrally selective glazing (clear on both sides). [Author].

Design principles for global commons: Natural resources and emerging technologies

Directory of Open Access Journals (Sweden)

Paul C. Stern

2011-09-01

Full Text Available Ostrom’s design principles for managing common pool resources were developed largely by examining local commons involving natural resources. This paper enumerates several key characteristics that distinguish such commons from more complex commons involving global resources and the risks of emerging technologies. It considers the degree to which the design principles transfer to those commons and concludes that although they have considerable external validity, the list needs some modification and elaboration to apply to global resources and risk commons. A list of design principles is offered for global resource commons and the risks of emerging technologies. Applying Ostrom’s approach to global resources and emerging technologies can improve understanding and expand the solution set for these problems from international treaties, top-down national regulation, and interventions in market pricing systems to include non-governmental institutions that embody principles of self-governance.

Natural uranium equivalent fuel an innovative design for proven CANDU technology

Energy Technology Data Exchange (ETDEWEB)

Pineiro, F.; Ho, K.; Khaial, A.; Boubcher, M.; Cottrell, C.; Kuran, S., E-mail: fabricia.pineiro@candu.com [Candu Energy Inc., Mississauga, ON (Canada); Zhenhua, Z.; Zhiliang, M. [Third Qinshan Nuclear Power Company, Haiyan, Zhejiang (China)

2015-07-01

The high neutron economy, on-power refuelling capability and fuel bundle design simplicity in CANDU reactors allow for the efficient utilization of alternative fuels. Candu Energy Inc. (Candu), in collaboration with the Third Qinshan Nuclear Power Company (TQNPC), the China North Nuclear Fuel Corporation (CNNFC), and the Nuclear Power Institute of China (NPIC), has successfully developed an advanced fuel called Natural Uranium Equivalent (NUE). This innovative design consists of a mixture of recycled and depleted uranium, which can be implemented in existing CANDU stations thereby bringing waste products back into the energy stream, increasing fuel resources diversity and reducing fuel costs. (author)

Natural uranium equivalent fuel. An innovative design for proven CANDU technology

Energy Technology Data Exchange (ETDEWEB)

Pineiro, F.; Ho, K.; Khaial, A.; Boubcher, M.; Cottrell, C.; Kuran, S. [Candu Energy Inc., Mississauga, Ontario (Canada); Zhenhua, Z.; Zhiliang, M. [Third Qinshan Nuclear Power Co., Haiyan, Zhejiang (China)

2015-09-15

The high neutron economy, on-power refuelling capability and fuel bundle design simplicity in CANDU® reactors allow for the efficient utilization of alternative fuels. Candu Energy Inc. (Candu), in collaboration with the Third Qinshan Nuclear Power Company (TQNPC), the China North Nuclear Fuel Corporation (CNNFC), and the Nuclear Power Institute of China (NPIC), has successfully developed an advanced fuel called Natural Uranium Equivalent (NUE). This innovative design consists of a mixture of recycled and depleted uranium, which can be implemented in existing CANDU stations thereby bringing waste products back into the energy stream, increasing fuel resources diversity and reducing fuel costs. (author)

Exposure to Non-Extreme Solar UV Daylight: Spectral Characterization, Effects on Skin and Photoprotection

Directory of Open Access Journals (Sweden)

Claire Marionnet

2014-12-01

Full Text Available The link between chronic sun exposure of human skin and harmful clinical consequences such as photo-aging and skin cancers is now indisputable. These effects are mostly due to ultraviolet (UV rays (UVA, 320–400 nm and UVB, 280–320 nm. The UVA/UVB ratio can vary with latitude, season, hour, meteorology and ozone layer, leading to different exposure conditions. Zenithal sun exposure (for example on a beach around noon under a clear sky can rapidly induce visible and well-characterized clinical consequences such as sunburn, predominantly induced by UVB. However, a limited part of the global population is exposed daily to such intense irradiance and until recently little attention has been paid to solar exposure that does not induce any short term clinical impact. This paper will review different studies on non-extreme daily UV exposures with: (1 the characterization and the definition of the standard UV daylight and its simulation in the laboratory; (2 description of the biological and clinical effects of such UV exposure in an in vitro reconstructed human skin model and in human skin in vivo, emphasizing the contribution of UVA rays and (3 analysis of photoprotection approaches dedicated to prevent the harmful impact of such UV exposure.

Exposure to non-extreme solar UV daylight: spectral characterization, effects on skin and photoprotection.

Science.gov (United States)

Marionnet, Claire; Tricaud, Caroline; Bernerd, Françoise

2014-12-23

The link between chronic sun exposure of human skin and harmful clinical consequences such as photo-aging and skin cancers is now indisputable. These effects are mostly due to ultraviolet (UV) rays (UVA, 320-400 nm and UVB, 280-320 nm). The UVA/UVB ratio can vary with latitude, season, hour, meteorology and ozone layer, leading to different exposure conditions. Zenithal sun exposure (for example on a beach around noon under a clear sky) can rapidly induce visible and well-characterized clinical consequences such as sunburn, predominantly induced by UVB. However, a limited part of the global population is exposed daily to such intense irradiance and until recently little attention has been paid to solar exposure that does not induce any short term clinical impact. This paper will review different studies on non-extreme daily UV exposures with: (1) the characterization and the definition of the standard UV daylight and its simulation in the laboratory; (2) description of the biological and clinical effects of such UV exposure in an in vitro reconstructed human skin model and in human skin in vivo, emphasizing the contribution of UVA rays and (3) analysis of photoprotection approaches dedicated to prevent the harmful impact of such UV exposure.

Occupants’ Utilization of Natural Ventilation: A Study of Selected Terrace House Designs in Hot-humid Climate

Directory of Open Access Journals (Sweden)

Ibiyeye AI

2015-05-01

Full Text Available With increased time spent indoors and demand for enhanced comfort levels, energy consumption in homes is rising mostly for cooling, particularly in hot-humid regions. Natural ventilation is seen as an alternative to mechanical cooling as it is totally independent on energy and has been reported to be of high potential. However, little information is available on the utilization of natural ventilation in individual living spaces in different house designs. Therefore, this paper aims to investigate occupants’ utilization of natural ventilation in living spaces under different terrace house designs in hot-humid climate and also the relationship between the openings and occupants’ satisfaction with natural ventilation. Five (5 different terrace house types in Putrajaya, Malaysia with different opening design characteristics were selected for the study. A total of 298 households from these house types were surveyed and results show that occupants mostly open their windows during the daytime to capture breeze from outside despite the fact that they owned air-conditioners. In terms of occupants’ level of satisfaction with indoor ventilation when utilizing natural ventilation, majority rated neither satisfied nor unsatisfied. Further regression analysis reveals that this level of satisfaction is significantly related to opening sizes that are in accordance with the law, duration of opening windows and AC ownership. Findings from this study will shed more light on behavioural pattern of occupants of residential buildings towards natural ventilation provisions and highlight the importance of conforming to the law governing them.

From the Cover: Understanding nature's design for a nanosyringe

Science.gov (United States)

Lopez, Carlos F.; Nielsen, Steve O.; Moore, Preston B.; Klein, Michael L.

2004-03-01

Synthetic and natural peptide assemblies can possess transport or conductance activity across biomembranes through the formation of nanopores. The fundamental mechanisms of membrane insertion necessary for antimicrobial or synthetic pore formation are poorly understood. We observe a lipid-assisted mechanism for passive insertion into a model membrane from molecular dynamics simulations. The assembly used in the study, a generic nanotube functionalized with hydrophilic termini, is assisted in crossing the membrane core by transleaflet lipid flips. Lipid tails occlude a purely hydrophobic nanotube. The observed insertion mechanism requirements for hydrophobic-hydrophilic matching have implications for the design of synthetic channels and antibiotics.

Design, Sensing and Control of a Robotic Prosthetic Eye for Natural Eye Movement

Directory of Open Access Journals (Sweden)

J. J. Gu

2006-01-01

Full Text Available Loss of an eye is a tragedy for a person, who may suffer psychologically and physically. This paper is concerned with the design, sensing and control of a robotic prosthetic eye that moves horizontally in synchronization with the movement of the natural eye. Two generations of robotic prosthetic eye models have been developed. The first generation model uses an external infrared sensor array mounted on the frame of a pair of eyeglasses to detect the natural eye movement and to feed the control system to drive the artificial eye to move with the natural eye. The second generation model removes the impractical usage of the eye glass frame and uses the human brain EOG (electro-ocular-graph signal picked up by electrodes placed on the sides of a person's temple to carry out the same eye movement detection and control tasks as mentioned above. Theoretical issues on sensor failure detection and recovery, and signal processing techniques used in sensor data fusion, are studied using statistical methods and artificial neural network based techniques. In addition, practical control system design and implementation using micro-controllers are studied and implemented to carry out the natural eye movement detection and artificial robotic eye control tasks. Simulation and experimental studies are performed, and the results are included to demonstrate the effectiveness of the research project reported in this paper.

Design, Sensing and Control of a Robotic Prosthetic Eye for Natural Eye Movement

OpenAIRE

J. J. Gu; M. Meng; A. Cook; P. X. Liu

2006-01-01

Loss of an eye is a tragedy for a person, who may suffer psychologically and physically. This paper is concerned with the design, sensing and control of a robotic prosthetic eye that moves horizontally in synchronization with the movement of the natural eye. Two generations of robotic prosthetic eye models have been developed. The first generation model uses an external infrared sensor array mounted on the frame of a pair of eyeglasses to detect the natural eye movement and to feed the contro...

Effective Energy Simulation and Optimal Design of Side-lit Buildings with Venetian Blinds

Science.gov (United States)

Cheng, Tian

Venetian blinds are popularly used in buildings to control the amount of incoming daylight for improving visual comfort and reducing heat gains in air-conditioning systems. Studies have shown that the proper design and operation of window systems could result in significant energy savings in both lighting and cooling. However, there is no convenient computer tool that allows effective and efficient optimization of the envelope of side-lit buildings with blinds now. Three computer tools, Adeline, DOE2 and EnergyPlus widely used for the above-mentioned purpose have been experimentally examined in this study. Results indicate that the two former tools give unacceptable accuracy due to unrealistic assumptions adopted while the last one may generate large errors in certain conditions. Moreover, current computer tools have to conduct hourly energy simulations, which are not necessary for life-cycle energy analysis and optimal design, to provide annual cooling loads. This is not computationally efficient, particularly not suitable for optimal designing a building at initial stage because the impacts of many design variations and optional features have to be evaluated. A methodology is therefore developed for efficient and effective thermal and daylighting simulations and optimal design of buildings with blinds. Based on geometric optics and radiosity method, a mathematical model is developed to reasonably simulate the daylighting behaviors of venetian blinds. Indoor illuminance at any reference point can be directly and efficiently computed. They have been validated with both experiments and simulations with Radiance. Validation results show that indoor illuminances computed by the new models agree well with the measured data, and the accuracy provided by them is equivalent to that of Radiance. The computational efficiency of the new models is much higher than that of Radiance as well as EnergyPlus. Two new methods are developed for the thermal simulation of buildings. A

Architecturally integrated PV system at the Ford Bridgend Engine Plant

Energy Technology Data Exchange (ETDEWEB)

Fisher, K.; Phillips, R.

2001-07-01

The aim of the project was to design and install a solar photovoltaic (PV) plant that could be retrofitted into an existing factory and to evaluate the cost and advantages of using the most recent advances in photovoltaic technology as follows: to demonstrate the use of the latest mono crystalline silicon technology within a large scale manufacturing environment, with the long term view of designing a state of the art installation for use in an environmentally sensitive {sup F}actory of the Future{sup .} To determine the performance and operating costs of a photovoltaic plant in northern latitudes thus providing data for the potential use of similar integrated systems elsewhere in the UK and Northern Europe. To evaluate the long term behaviour of an integrated system and its component parts. To demonstrate the feasibility of retrofitting PV roof lights into a fully operational manufacturing plant. To provide natural daylight into the manufacturing facility thereby improving the working environment, enhancing productivity and reducing the electrical lighting load within the plant during daylight hours. (author)

Natural genetic engineering: intelligence & design in evolution?

DEFF Research Database (Denmark)

Ussery, David

2011-01-01

There are many things that I like about James Shapiro's new book "Evolution: A View from the 21st Century" (FT Press Science, 2011). He begins the book by saying that it is the creation of novelty, and not selection, that is important in the history of life. In the presence of heritable traits...... function. Shapiro argues that what we see in genomes is 'Natural Genetic Engineering', or designed evolution: "Thinking about genomes from an informatics perspective, it is apparent that systems engineering is a better metaphor for the evolutionary process than the conventional view of evolution...... as a select-biased random walk through limitless space of possible DNA configurations" (page 6). In this review, I will have a look at four topics: 1.) why I think genomics is not the whole story; 2.) my own perspective of E. coli genomics, and how I think it relates to this book; 3.) a brief discussion...

Novel Principles and Techniques to Create a Natural Design in Female Hairline Correction Surgery.

Science.gov (United States)

Park, Jae Hyun

2015-12-01

Female hairline correction surgery is becoming increasingly popular. However, no guidelines or methods of female hairline design have been introduced to date. The purpose of this study was to create an initial framework based on the novel principles of female hairline design and then use artistic ability and experience to fine tune this framework. An understanding of the concept of 5 areas (frontal area, frontotemporal recess area, temporal peak, infratemple area, and sideburns) and 5 points (C, A, B, T, and S) is required for female hairline correction surgery (the 5A5P principle). The general concepts of female hairline correction surgery and natural design methods are, herein, explained with a focus on the correlations between these 5 areas and 5 points. A natural and aesthetic female hairline can be created with application of the above-mentioned concepts. The 5A5P principle of forming the female hairline is very useful in female hairline correction surgery.

Cool City Design: Integrating Real-Time Urban Canyon Assessment into the Design Process for Chinese and Australian Cities

Directory of Open Access Journals (Sweden)

Marcus White

2016-09-01

Full Text Available Many cities are undergoing rapid urbanisation and intensification with the unintended consequence of creating dense urban fabric with deep ‘urban canyons’. Urban densification can trap longwave radiation impacting on local atmospheric conditions, contributing to the phenomena known as the Urban Heat Island (UHI. As global temperatures are predicted to increase, there is a critical need to better understand urban form and heat retention in cities and integrate analysis tools into the design decision making process to design cooler cities. This paper describes the application and validation of a novel three-dimensional urban canyon modelling approach calculating Sky View Factor (SVF, one important indicator used in the prediction of UHI. Our modified daylighting system based approach within a design modelling environment allows iterative design decision making informed by SVF on an urban design scale. This approach is tested on urban fabric samples from cities in both Australia and China. The new approach extends the applicability in the design process of existing methods by providing ‘real-time’ SVF feedback for complex three-dimensional urban scenarios. The modelling approach enables city designers to mix intuitive compositional design modelling with dynamic canyon feedback. The approach allows a greater understanding of existing and proposed urban forms and identifying potential canyon problem areas, improved decision making and design advocacy, and can potentially have an impact on cities’ temperature.

Principal component analysis as a tool for library design: a case study investigating natural products, brand-name drugs, natural product-like libraries, and drug-like libraries.

Science.gov (United States)

Wenderski, Todd A; Stratton, Christopher F; Bauer, Renato A; Kopp, Felix; Tan, Derek S

2015-01-01

Principal component analysis (PCA) is a useful tool in the design and planning of chemical libraries. PCA can be used to reveal differences in structural and physicochemical parameters between various classes of compounds by displaying them in a convenient graphical format. Herein, we demonstrate the use of PCA to gain insight into structural features that differentiate natural products, synthetic drugs, natural product-like libraries, and drug-like libraries, and show how the results can be used to guide library design.

Energy-Efficient Office Buildings at High Latitudes

Energy Technology Data Exchange (ETDEWEB)

Lerum, V.

1996-12-31

This doctoral thesis describes a method for energy efficient office building design at high latitudes and cold climates. The method combines daylighting, passive solar heating, solar protection, and ventilative cooling. The thesis focuses on optimal design of an equatorial-facing fenestration system. A spreadsheet framework linking existing simplified methods is used. The daylight analysis uses location specific data on frequency distribution of diffuse daylight on vertical surfaces to estimate energy savings from optimal window and room configurations in combination with a daylight-responsive electric lighting system. The passive solar heating analysis is a generalization of a solar load ratio method adapted to cold climates by combining it with the Norwegian standard NS3031 for winter months when the solar savings fraction is negative. The emphasis is on very high computational efficiency to permit rapid and comprehensive examination of a large number of options early in design. The procedure is illustrated for a location in Trondheim, Norway, testing the relative significance of various design improvement options relative to a base case. The method is also tested for two other locations in Norway, at latitudes 58 and 70 degrees North. The band of latitudes between these limits covers cities in Alaska, Canada, Greenland, Iceland, Scandinavia, Finland, Russia, and Northern Japan. A comprehensive study of the ``whole building approach`` shows the impact of integrated daylighting and low-energy design strategies. In general, consumption of lighting electricity may be reduced by 50-80%, even at extremely high latitudes. The reduced internal heat from electric lights is replaced by passive solar heating. 113 refs., 85 figs., 25 tabs.

Influence of reactor design on the establishment of natural circulation in pool-type LMFBR

International Nuclear Information System (INIS)

Durham, M.E.

1976-01-01

The general principles involved in establishing natural circulation in a pool-type liquid metal cooled fast breeder reactor following loss of a.c. supplies are elucidated and the effects of design features by use of the computer code MELANI are quantified. It is shown that natural circulation can provide a feasible means of emergency core cooling in addition to that provided by pony motors. The choice of primary pump rundown time has a significant effect in controlling peak core outlet temperatures in the hypothetical case of natural circulation alone being the core heat removal process. (author)

NATURAL VENTILATION: A PASSIVE DESIGN STRATEGY IN DESIGNING HOTEL LOBBIES – CASES FROM TROPICAL MALAYSIA

Directory of Open Access Journals (Sweden)

Abdul Malik Abdul Rahman

2009-07-01

Full Text Available When the Malaysian government increased electricity tariff by up to 12% in early 2006 and also another increase in early July 2008, most commercial buildings were affected by the move. The hardest hit would be the hotel industry as they are among the economic forefronts of the nation. Already burdened with the rigorous efforts of filling their rooms with guests, they now have to re-strategize to sustain business. Energy bills to pay for cooling have always been the biggest burden. Cooling the air is an intangible and a never-ending wasteful activity. Cold room for food is on for 24 hours for obvious reasons. To overcome this, one strategy was considered to be part and parcel of the overall building design so as to contribute to the reduction of the high dependency of energy consumption for cooling. The challenge here is to reduce electricity consumption without compromising the comfort of the guests and also reduce the overhead costs to give a more competitive edge in hotel room rates. Among other passive design elements this paper considers two natural ventilation occurrences and locations that can be relied upon for Malaysian hotel designs.

Progress towards developing consistent design and evaluation guidelines for DOE facilities subjected to natural phenomena hazards

International Nuclear Information System (INIS)

Kennedy, R.P.; Short, S.A.; McDonald, J.R.; McCann, M.W. Jr.; Reed, J.W.

1985-01-01

Probabilistic definitions of earthquake, wind and tornado natural phenomena hazards for many Department of Energy (DOE) facilities throughout the United States have been developed. In addition, definitions of the flood hazards which might affect these locations are currently being developed. The Department of Energy Natural Phenomena Hazards Panel is now preparing a document to provide guidance and criteria for DOE facility managers to assure that DOE facilities are adequately constructed to resist the effects of natural phenomena such as earthquake, strong wind and flood. The intent of this document is to provide instruction on how to utilize the hazard definitions to evaluate existing facilities and design new facilities in a manner such that the risk of adverse consequences is consistent with the cost, function, and danger to the public or environment of the facility. Potential effects on facilities of natural phenomena hazards are emphasized in this paper. The philosophy for mitigating these effects to be employed in the design and evaluation guidelines is also presented

Between Indoor and Outdoor. Norwegian Perceptions of Well-Being in Energy Efficient Housing

DEFF Research Database (Denmark)

Wågø, Solvår; Hauge, Bettina; Støa, Eli

2017-01-01

-energy building concepts are based on a rational approach to comfort in housing limited to mainly measurable aspects. This, however, hardly reflects what makes residents feel comfortable at home, since it lacks a holistic understanding of residential well-being. Well-being is a complex and multi-facetted concept...... that includes atmosphere and feeling at home. In a qualitative study of four Norwegian low-energy housing projects, we investigate and discuss the impact of visual and sensory qualities, like view, daylight and access to fresh air, on residential well-being. The study reveals that it is possible to achieve well-being...... in energy-efficient housing, but some practices jeopardize the energy- design concept and influence energy use. Residents find strategies to achieve well-being by opening windows and doors, despite restrictions on airing naturally. Access to daylight and view and the ability to open windows or balcony doors...

The impact of the daylight saving time on electricity consumption-A case study from Jordan

International Nuclear Information System (INIS)

Awad Momani, Mohammad; Yatim, Baharudin; Ali, Mohd Alauddin Mohd

2009-01-01

The paper examines the impact of daylight saving time (DST) on electricity consumption in Jordan. Two types of analysis were done: the first analysis examines the impact of DST on the lighting loads based on a survey study made for residential and commercial sectors. The second examines the impact of DST on the over all electricity generation through analyzing the daily load curves (DLCs) before and after the DST onset and removal in 2000 and 2007. The results show that the application of DST during the year 2000 saves the electricity used for illumination by -0.73% but it increases the overall generation at the onset and removal of DST by 0.5% and 1.4% due to increase in the heating and cooling loads. The analysis of DLCs during the year 2007 shows similar effects as in the year 2000 except during the early morning period at the DST onset where DST decreases the demand during this time. The analysis shows that DST decreases the electricity demand at DST onset by 0.2% and increases it at DST removal by 0.3%. A possible decrease in the electricity consumption may take place if the DST is implemented from April to end of August.

Designing Effective Natural Hazards Preparedness Communications: Factors that Influence Perceptions and Action

Science.gov (United States)

Wong-Parodi, G.; Fischhoff, B.

2012-12-01

Even though most people believe that natural hazards preparation is important for mitigating damage to their homes and basic survival in the aftermath of a disaster, few actually disaster-proof their homes, create plans, or obtain supplies recommended by agencies such as the Federal Emergency Management Agency. Several observational studies suggest that socio-demographic characteristics such as income and psychological characteristics such as self-efficacy affect whether or not an individual takes action to prepare for a natural hazard. These studies, however, only suggest that these characteristics may play a role. There has been little research that systematically investigates how these characteristics play a role in people's perceptions of recommended preparatory activities and decisions to perform them. Therefore, in Study 1, we explore people's perceptions of natural hazards preparedness measures on four dimensions: time, cost, helpfulness, and sense of preparedness. We further investigate if these responses vary by the socio-demographic and psychological characteristics of self-efficacy, knowledge, and income level. In Study 2, we experimentally test whether people's sense of self-efficacy, as it relates to natural hazards, can be manipulated through exposure to an "easy-and-effective" versus a "hard-and-effective" set of preparation measures. Our findings have implications for the design of natural hazards communication materials for the general public.

Incidence of myocardial infarction with shifts to and from daylight savings time.

Science.gov (United States)

Jiddou, Monica R; Pica, Mark; Boura, Judy; Qu, Lihua; Franklin, Barry A

2013-03-01

Modulators of normal bodily functions such as the duration and quality of sleep might transiently influence cardiovascular risk. The transition to daylight savings time (DST) has been associated with a short-term increased incidence ratio (IR) of acute myocardial infarction (AMI). The present retrospective study examined the IR of AMIs that presented to our hospitals the week after DST and after the autumn switch to standard time, October 2006 to April 2012, with specific reference to the AMI type. Our study population (n = 935 patients; 59% men, 41% women) was obtained from the electronic medical records of the Royal Oak and Troy campuses of the Beaumont Hospitals in Michigan. Overall, the frequency of AMI was similar in the spring and autumn, 463 (49.5%) and 472 (50.5%), respectively. The IR for the first week after the spring shift was 1.17 (95% confidence interval 1.00 to 1.36). After the transition from DST in the autumn, the IR for the same period was lower, but not significantly different, 0.99 (95% confidence interval 0.85 to 1.16). Nevertheless, the greatest increase in AMI occurred on the first day (Sunday) after the spring shift to DST (1.71, 95% confidence interval 1.09 to 2.02; p <0.05). Also, a significantly greater incidence was found of non-ST-segment myocardial infarction after the transition to DST in the study group compared with that in the control group (p = 0.022). In conclusion, these data suggest that shifts to and from DST might transiently affect the incidence and type of acute cardiac events, albeit modestly. Copyright © 2013 Elsevier Inc. All rights reserved.

An Investigation into the Factors Affecting the Design of Nature-Compatible Recreational-Residential Complexes- Instance Analysis

Directory of Open Access Journals (Sweden)

Seyyedeh Fatemeh Safavi Mirmahalleh

2017-02-01

Full Text Available Explaining tourism concepts, standards of recreational-residential complexes and the methods for accurate treating with nature, this paper tries to study the suitable instances of recreational-residential complexes and to adopt their positive aspects as a design strategy. SWOT matrix was built based on the weaknesses and strengths of the project site and design principles were derived by observing the extracted influential factors. Considering land topography, for example, different areas of buildings were shifted and combined with the nature. - Residential and public zones gained a nice view towards the nature by keeping their orientation and extending them in east-west direction - Service section connected more appropriately with residential and public areas - Sections which do not need extra light such as W.Cs, storages and installation rooms, were considered in a side of the building which was adjacent to soil - In residential section, rhythm was implemented in ceilings and windows - Golden values and proportions were used to design the plane and façade of the complex

Focusing on natural elements in the early design process, new potentials for architects?

DEFF Research Database (Denmark)

Sjøstedt, Victoria

2010-01-01

influence the drawn result, have been investigated. The result shows that simple means of environmental integration, as represented by natural elements, played an important role in the development of the design solutions, and had a much larger impact on the drawn result compared to proposed technological...

Next nature : nature changes along with us

NARCIS (Netherlands)

Mensvoort, van K.M.; Grievink, H.J.

2011-01-01

We debate saving nature, we dream about escaping to nature, but rarely do we ask "What is nature?". The Next Nature book radically shifts your notion of nature. Where technology and nature are traditionally seen as opposed, they now appear to merge or even trade places. With our urge to design our

Application of remote source lighting system in different layouts of enclosed lift lobbies in highrise residential building of central core design

Energy Technology Data Exchange (ETDEWEB)

Wong, I.; Yang, H.X. [Hong Kong Polytechnic Univ., Hung Hom, Hong Kong (China). Dept. of Building Services, Renewable Energy Research Group

2010-07-01

This paper reported on a simulation study that explored a new building philosophy that optimizes solar energy to minimize reliance on fossil fuels and to design energy conscious buildings that minimize the energy needed for lighting and cooling. The viability of applying a remote source lighting (RSL) system to transmit daylight into central core lobbies in high-rise residential buildings in Hong Kong was demonstrated. These lobbies are usually enclosed without any windows, thus requiring electric lighting to be switched on 24 hours continuously, consuming non-renewable energy in most cases. In this study, the RSL system was composed of small diameter light pipes and optic fibers. The system transports daylight from the exterior to illuminate the enclosed lobbies. The simulation was conducted to analyze and compare the light transmission efficiency when applying the RSL system to different layouts of the lift lobbies. It was concluded that the efficiency of the RSL system is governed by the length and number of turns in the lobby. 13 refs., 12 figs.

Impact of design options on natural circulation performance of the AFR-300 advanced fast reactor

International Nuclear Information System (INIS)

Dunn, F. D.

2002-01-01

The AFR-300, Advanced Fast Reactor (300 Mwe), has been proposed as a Generation IV concept. It could also be used to dispose of surplus weapons grade plutonium or as an actinide burner for transmutation of high level radioactive waste. AFR-300 uses metallic fuel and sodium coolant. The design of AFR-300 takes account of the successful design and operation of EBR-II, but the AFR-300 design includes a number of advances such as an advanced fuel cycle, inspectability and improved economics. One significant difference between AFR-300 and EBR-II is that AFR-300 is considerably larger. Another significant difference is that AFR-300 has no auxiliary EM pump in the primary loop to guarantee positive core flow when the main primary pumps are shut down. Thus, one question that has come up in connection with the AFR-300 design is whether natural circulation flow is sufficient to prevent damage to the core if the primary pumps fail. Insufficient natural circulation flow through the core could result in high cladding temperatures and cladding failure due to eutectic penetration of the cladding by the metal fuel. The rate of eutectic penetration of the cladding is strongly temperature dependent, so cladding failure depends on how hot the cladding gets and how long it is at elevated temperatures. To investigate the adequacy of natural circulation flow, a number of pump failure transients and a number of design options have been analyzed with the SASSYS-1 systems analysis code. This code has been validated for natural circulation behavior by analysis of Shutdown Heat Removal Tests performed in EBR-II. The AFR-300 design includes flywheels on the primary pumps to extend the pump coastdown times, and the size of the flywheels can be picked to give optimum coastdown times. One series of transients that has been run consists of protected loss-of-flow transients with various values for the combined moment of inertia of the pump, the motor and the flywheel giving coastdown times from 70