Investigation of Processes Controlling Elution of Solutes from Nonaqueous Phase Liquid (NAPL) Pools into Groundwater

Science.gov (United States)

Seyedabbasi, M.; Pirestani, K.; Holland, S. B.; Imhoff, P. T.

2005-12-01

Two major processes influencing the elution of solutes from porous media contaminated with nonaqueous phase liquids (NAPLs) are external mass transfer between the NAPL and groundwater and internal diffusion through NAPL ganglia and pools. There is a relatively large body of literature on the dissolution of single-species NAPLs. Less is known about the rates of elution of compounds dissolving from multicomponent NAPLs. We examined the mass transfer of one solute, 2,3-dimethyl-2-butanol (DMB) - a partitioning tracer, between groundwater and a dense NAPL - trichloroethylene (TCE). Diffusion cell experiments were used to measure the molecular diffusion coefficient of DMB in pure TCE and in porous media contaminated with a TCE pool. Measured diffusion coefficients were compared with empirical correlations (pure TCE) and a parallel resistance model (TCE pool). Based on the results from these analyses, a dimensionless Biot number was derived to express the ratio of the external rate of mass transfer from a NAPL pool to the internal rate of diffusion within the pool, which varies with NAPL saturation and NAPL-water partition coefficient. Biot numbers were then estimated for several laboratory scale experiments involving DMB transport between NAPL pools and groundwater. The estimated Biot numbers were in good agreement with experimental results. The expression for the Biot number developed here may be used to assess the processes controlling the elution of solutes from NAPL pools, which has implications on long-term predictions of solute dissolution from NAPLs in the field.

Long-term composition dynamics of PAH-containing NAPLs and implications for risk assessment

International Nuclear Information System (INIS)

Peters, C.A.; Knightes, C.D.; Brown, D.G.

1999-01-01

Subsurface contaminants such as coal tar, creosote, diesel fuel, and other petroleum-derived materials typically exist as very complex chemical mixtures. Risk assessment is useful for site management if a single metric can represent the composition-dependent risk profile of the mixture. This paper examines the factors governing human health risk assessment for multicomponent nonaqueous phase liquids (NAPLs) containing polycyclic aromatic hydrocarbons (PAHs). A model is presented describing the interdependence of the dissolution rates of individual compounds and the shifts in the NAPL composition that occur due to the large differences in aqueous solubilities. The model also accounts for solidification of the less soluble NAPL constituents. Thirty-year numerical simulations describe composition dynamics for natural environmental processes as well as three remediation processes: pump-and-treat, bioremediation, and solvent extraction. Carcinogenic risk due to ingestion of contaminated groundwater at the source is estimated, and its dependence on contaminant removal and NAPL composition shifts is described. When composition dynamics are slow, a compound like naphthalene has great potential to contribute to risk because it may persist in groundwater. When there is significant depletion of the lower molecular weight compounds, the risk is dominated by contributions from compounds such as benzo[a]pyrene. Remediation technologies have the greatest potential for risk reduction if they are effective in removing the more carcinogenic, high molecular weight compounds. Because PAHs can contribute to risk for different reasons and because of the interdependence of their behaviors, compositional approaches lead to better risk predictions for PAHs than simple lumped metrics such as total petroleum hydrocarbon (TPH)

A method for assessing residual NAPL based on organic chemical concentrations in soil samples

International Nuclear Information System (INIS)

Feenstra, S.; Mackay, D.M.; Cherry, J.A.

1991-01-01

Ground water contamination by non-aqueous phase liquid (NAPL) chemicals is a serious concern at many industrial facilities and waste disposal sites. NAPL in the form of immobile residual contamination, or pools of mobile or potentially mobile NAPL, can represent continuing sources of ground water contamination. In order to develop rational and cost-effective plans for remediation of soil and ground water contamination at such sites, it is essential to determine if non-aqueous phase liquid (NAPL) chemicals are present in the subsurface and delineate the zones of NAPL contamination. Qualitatively, soil analyses that exhibit chemical concentrations in the percent range or >10,000 mg/kg would generally be considered to indicate the presence of NAPL. However, the results of soil analyses are seldom used in a quantitative manner to assess the possible presence of residual NAPL contamination when chemical concentrations are lower and the presence of NAPL is not obvious. The assessment of the presence of NAPL in soil samples is possible using the results of chemical and physical analyses of the soil, and the fundamental principles of chemical partitioning in unsaturated or saturated soil. The method requires information on the soil of the type typically considered in ground water contamination studies and provides a simple tool for the investigators of chemical spill and waste disposal sites to assess whether soil chemical analyses indicate the presence of residual NAPL in the subsurface

First field test of NAPL detection with high resolution borehole seismic imaging

International Nuclear Information System (INIS)

Geller, Jil T.; Peterson, John E.; Williams, Kenneth H.; Ajo-Franklin, Jonathan B.; Majer, Ernest L.

2002-01-01

The purpose of this field test is to evaluate the detectability of NAPLs by high resolution tomographic borehole seismic imaging. The site is a former Department of Energy (DOE) manufacturing facility in Pinellas County, Florida. Cross-hole seismic and radar measurements were made in a shallow aquifer contaminated with non-aqueous phase liquids (NAPLs). Cone penetration test (CPT) and induction logging were performed for lithology and conductivity, respectively. The main challenge is to distinguish fluid phase heterogeneities from anomalies arising from geologic structure. Our approach is to compare measurements between locations of known contamination with a nearby uncontaminated location of similar lithology where differences in signal transmission may be attributed to fluid phase changes. The CPT data show similar lithologic structure at the locations both within and outside the NAPL-contaminated area. Zones of low seismic amplitude at about 7 m depth appear more extensive in the NAPL-contaminated area. These zones may be the result of fluid phase heterogeneities (NAPL or gas), or they may be due to the lithology, i.e. attenuating nature of the layer itself, or the transition between two distinct layers. The presence of lithologic contrasts, specifically from higher permeability sands to lower permeability silts and clays, also indicate potential locations of NAPL, as they could be flow barriers to downward NAPL migration

Future perspectives in melanoma research. Meeting report from the "Melanoma Research: a bridge Naples-USA. Naples, December 6th-7 th2010"

Directory of Open Access Journals (Sweden)

Maio Michele

2011-03-01

Full Text Available Abstract Progress in understanding the molecular basis of melanoma has made possible the identification of molecular targets with important implications in clinical practice. In fact, new therapeutic approaches are emerging from basic science and it will be important to implement their rapid translation into clinical practice by active clinical investigation. The first meeting of Melanoma Research: a bridge Naples-USA, organized by Paolo A. Ascierto (INT, Naples, Italy and Francesco Marincola (NIH, Bethesda, USA took place in Naples, on 6-7 December 2010. This international congress gathered more than 30 international and Italian faculty members and was focused on recent advances in melanoma molecular biology, immunology and therapy, and created an interactive discussion across Institutions belonging to Government, Academy and Pharmaceutical Industry, in order to stimulate new approaches in basic, translational and clinical research. Four topics of discussion were identified: New pathways in Melanoma, Biomarkers, Clinical Trials and New Molecules and Strategies.

Monitoring bioremediation of weathered diesel NAPL using oxygen depletion profiles

International Nuclear Information System (INIS)

Davis, G.B.; Johnston, C.D.; Patterson, B.M.; Barber, C.; Bennett, M.

1995-01-01

Semicontinuous logging of oxygen concentrations at multiple depths has been used to evaluate the progress of an in situ bioremediation trial at a site contaminated by weathered diesel nonaqueous-phase liquid (NAPL). The evaluation trial consisted of periodic addition of nutrients and aeration of a 100-m 2 trial plot. During the bioremediation trial, aeration was stopped periodically, and decreases in dissolved and gaseous oxygen concentrations were monitored using data loggers attached to in situ oxygen sensors placed at multiple depths above and within a thin NAPL-contaminated zone. Oxygen usage rate coefficients were determined by fitting zero- and first-order rate equations to the oxygen depletion curves. For nutrient-amended sites within the trial plot, estimates of oxygen usage rate coefficients were significantly higher than estimates from unamended sites. These rates also converted to NPL degradation rates, comparable to those achieved in previous studies, despite the high concentrations and weathered state of the NAPL at this test site

Using simulation training to improve shoulder dystocia documentation.

Science.gov (United States)

Goffman, Dena; Heo, Hye; Chazotte, Cynthia; Merkatz, Irwin R; Bernstein, Peter S

2008-12-01

To estimate whether shoulder dystocia documentation could be improved with a simulation-based educational experience. Obstetricians at our institution (n=71) participated in an unanticipated simulated shoulder dystocia followed by an educational debriefing session. A second shoulder dystocia simulation was completed at a later date. Delivery notes were a required component of each simulation. Notes were evaluated using a standardized checklist for 16 key components. One point was awarded for each element present. Wilcoxon signed rank tests were used to compare documentation between simulations. Participants consisted of 43 (61%) attending and 28 (39%) resident physicians. Ages ranged from 25-63 years (mean+/-standard deviation 37.0+/-9.0), and 75% were female. Years of obstetric experience for our attendings ranged from 4 to 31 years (14.5+/-8.1). Documentation scores were significantly improved after training. Attendings' baseline documentation scores were 8.5+/-2.2 and improved to 9.4+/-2.3, P=.03. Residents' documentation scores also improved (9.0+/-2.1 compared with 10.6+/-2.2, P=.001). In particular, improvement was seen in two components of documentation: 1) providers present for shoulder dystocia (P=.007) and 2) which shoulder was anterior (P<.001). No improvement was seen in standard delivery note components (eg, date, time) or infant characteristics (eg, weight, Apgar scores). Although we showed a significant improvement in the quality of documentation through this simulation program, notes were still suboptimal. Use of standardized forms for shoulder dystocia delivery notes may provide the best solution to ensure appropriate documentation. II.

Enhanced dissolution of TCE in NAPL by TCE-degrading bacteria in wetland soils

International Nuclear Information System (INIS)

Lee, Sangjin

2007-01-01

The influence of trichloroethene (TCE) dechlorinating mixed cultures in dissolution of TCE in nonaqueous phase liquid (NAPL) via biodegradation was observed. Experiments were conducted in batch reactor system with and without marsh soils under 10 and 20 deg. C for 2 months. The dissolution phenomenon in biotic reactors containing mixed cultures was showed temporal increases compared to abiotic reactors treated with biocide. Effective NAPL-water transfer rate (K m ) calculated in this study showed more than four times higher in biotic reactors than that in abiotic reactors. The results might be attributed to the biologically enhanced dissolution process via dechlorination in reactors. Temperature would be a factor to determine the dissolution rate by controlling bacterial activity. The TCE dechlorination occurred even in an interface of TCE-NAPL that demonstrated no previous TCE biodegradation, suggesting that microbes may be useful in developing source-zone bioremediation system. In conclusion, dechlorinating mixed culture could enhance dissolution in NAPL that may be useful in the application of source zone bioremediation

Micro-scale displacement of NAPL by surfactant and microemulsion in heterogeneous porous media

Science.gov (United States)

Javanbakht, Gina; Arshadi, Maziar; Qin, Tianzhu; Goual, Lamia

2017-07-01

Industrial processes such as remediation of oil-contaminated aquifers and enhanced oil recovery (EOR) often utilize chemical additives to increase the removal of non-aqueous phase liquids (NAPLs) from subsurface formations. Although the majority of crude oils are classified as LNAPLs, they often contain heavy molecules (DNAPLs) such as asphaltenes that tend to adsorb on minerals and alter their wettability. Effective additives are therefore those that can reduce the threshold capillary pressure, thus mobilizing LNAPL inside pore spaces and solubilizing DNAPL from rock surfaces. Nonionic surfactants in brine have often been injected to oil or contaminated aquifer formations in order to enhance NAPL displacement through IFT reduction. Recent studies revealed that surfactant-based microemulsions have a higher tendency to alter the wettability of surfaces, compared to surfactants alone, leading to more effective NAPL removal. However, the impact of these additives on pore-scale displacement mechanisms and multi-phase fluid occupancy in porous media is, to date, still unclear. In this study, x-ray microtomography experiments were performed to investigate the impact of surfactants and microemulsions on the mobilization and solubilization of NAPL in heterogeneous rocks. Saturation profiles indicated that an incremental NAPL removal was attained by addition of microemulsion to brine, compared with surfactant. Residual cluster size distributions revealed that microemulsions could break up large clusters into smaller disconnected ones, improving their mobilization in the rock. In-situ contact angle measurements showed that microemulsions could reverse the wettability of rough contaminated surfaces to a higher extent than surfactants. Unlike surfactant alone, the surfactant-solvent blend in the carrier fluid of microemulsions was able to penetrate rough grain surfaces, particularly those of dolomite cement, and desorb asphaltenes in the form of small-emulsified NAPL droplets

The migration and monitoring of viscous NAPLs (coal tar and creosote) in the subsurface

Energy Technology Data Exchange (ETDEWEB)

Jackson, R. [Intera Engineering Ltd., Heidelberg, ON (Canada)

2009-07-01

The high viscosity of nonaqueous phase liquids (NAPLs) such as creosote and coal tar complicates efforts to monitor their mobility at contaminated sites. Viscous NAPLs can remain mobile for many decades after their application as a wood preservative, or after the closure of the facilities in which they were generated. NAPL-wet pathways in the subsurface can also lead to errors in residual saturation measurements. This abstract discussed issues related to creeping flow and the low seepage rates that are not accounted for using traditional measuring methods. Examples of creeping flow and the monitoring techniques used to assess it were presented for sites in British Columbia and Florida. The drainage of viscous NAPLs during water table declines was also considered, and a case study of a coal tar-removal procedures using polymer surfactant flooding was presented.

Measurement of underground contamination of non-aqueous phase liquids (NAPLs) on the basis of the radon concentration in ground level air

International Nuclear Information System (INIS)

Schubert, M.

2001-01-01

It was investigated whether measurements of radon concentrations in ground level air are a suitable method of detecting sub-surface soil contamination with non-aqueous phase liquids (NAPLs). The working postulation was that, due to the very high solubility of radon in NAPLs, and the resulting accumulation of radon in NAPLs, radon exhalation to the ground level air in the proximity of such NAPL contamination should be locally reduced, thus indicating contamination of sub-surface soils with NAPLs. The research work reported was to verify the working theory by way of experiments, and to finally develop a reliable detection method for NAPL contaminations. The investigations comprised theoretical studies, laboratory experiments, experiments in defined soil columns, and extensive field studies [de

Does teaching of documentation of shoulder dystocia delivery through simulation result in improved documentation in real life?

Science.gov (United States)

Comeau, Robyn; Craig, Catherine

2014-03-01

Documentation of deliveries complicated by shoulder dystocia is a valuable communication skill necessary for residents to attain during residency training. Our objective was to determine whether the teaching of documentation of shoulder dystocia in a simulation environment would translate to improved documentation of the event in an actual clinical situation. We conducted a cohort study involving obstetrics and gynaecology residents in years 2 to 5 between November 2010 and December 2012. Each resident participated in a shoulder dystocia simulation teaching session and was asked to write a delivery note immediately afterwards. They were given feedback regarding their performance of the delivery and their documentation of the events. Following this, dictated records of shoulder dystocia deliveries immediately before and after the simulation session were identified through the Meditech system. An itemized checklist was used to assess the quality of residents' dictated documentation before and after the simulation session. All eligible residents (18) enrolled in the study, and 17 met the inclusion criteria. For 10 residents (59%) documentation of a delivery with shoulder dystocia was present before and after the simulation session, for five residents (29%) it was only present before the session, and for two residents (18%) it was only present after the session. When residents were assessed as a group, there were no differences in the proportion of residents recording items on the checklist before and after the simulation session (P > 0.05 for all). Similarly, analysis of the performance of the10 residents who had dictated documentation both before and after the session showed no differences in the number of elements recorded on dictations done before and after the simulation session (P > 0.05 for all). The teaching of shoulder dystocia documentation through simulation did not result in a measurable improvement in the quality of documentation of shoulder dystocia in

Salvator Rosa e Napoli / Salvator Rosa and Naples

Directory of Open Access Journals (Sweden)

Daniela De Liso

2017-12-01

Full Text Available Salvator Rosa (Napoli, 1615- Roma 1673 fu pittore e poeta tra i più interessanti del secolo diciassettesimo. Il saggio intende indagare il complesso rapporto artistico e personale che Rosa ebbe con la città di Napoli, in cui era nato e dalla quale era quasi fuggito quando era poco più che un ragazzo. Attraverso una lettura delle principali fonti biobibliografiche a lui contemporanee, di alcune delle sue tele, dei versi delle Satire e di stralci delle lettere che a Napoli dedicherà, s’intende sottolineare che della capitale del Meridione la scrittura e l’arte di Salvator Rosa sono in grado di restituirci un’immagine altra rispetto a quella topica di Napoli gentile, perla luminosa di quella Campania felix che proprio nel Seicento attrae pittori e poeti da ogni parte d’Europa. Nei versi di Rosa, come nella scrittura in prosa, Napoli è, infatti, croce e delizia, prigione da cui fuggire e porto di quell’agognato ritorno che, al di là delle leggendarie asserzioni di alcuni biografi romantici, mai avverrà.   Salvator Rosa (Naples, 1615- Rome, 1673 was a painter and poet among the most interesting of the seventeenth century. The essay intends to investigate the complex artistic and personal relationship that Rosa had with the city of Naples, where she was born and from which she had fled when she was little more than a boy. Through a reading of the main biobibliographic sources to him contemporary, some of his canvases, the verses of the Satire and the excerpts of the letters that Naples will dedicate, it is meant to point out that in the capital of the South the writing and art of Salvator Rosa are Able to give us an image other than the topical one of Napoli's kind, bright pearl of the Campania felix that in the seventeenth century attracts painters and poets from all over Europe. In the lines of Rosa, as in prose writing, Naples is, in fact, a cross and delight, a prison from which to flee and bring about that auspicious return that

The photodegradation of trichloroethylene with or without the NAPL by UV irradiation in surfactant solutions

Energy Technology Data Exchange (ETDEWEB)

Jia Juncai [Department of Civil and Structural Engineering, Research Centre for Urban Environmental Technology and Management, Hong Kong Polytechnic University, Hung Hom, Kowloon (Hong Kong); Chu, W. [Department of Civil and Structural Engineering, Research Centre for Urban Environmental Technology and Management, Hong Kong Polytechnic University, Hung Hom, Kowloon (Hong Kong)], E-mail: cewchu@polyu.edu.hk

2009-01-15

The photodegradation of trichloroethene (TCE) with or without nonaqueous phase liquids (NAPL) by ultraviolet irradiation in surfactant solutions was examined in this study. The photodecay of TCE was studied at monochromatic 254 nm UV lamps. The effects of the type of surfactants, initial surfactant concentrations, pH levels and NAPL concentrations were examined to explore the photodecay of TCE. All the photodegradation of TCE followed pseudo-first-order decay kinetics at various conditions. It was found that Brij 35 overdose and higher initial pH levels may retard or inhibit the photodecay of TCE, mainly due to protons, intermediate generation and change of surfactant structure in the processes. The optimal condition for TCE photodecay was suggested based on the analysis of kinetics data, from which the reaction mechanism of TCE in the presence of NAPL form was also studied. In general, the reactions of TCE in micellar solution and NAPL pool can be considered as independent pathways due to the low molecule diffusion between the two phases.

The photodegradation of trichloroethylene with or without the NAPL by UV irradiation in surfactant solutions

International Nuclear Information System (INIS)

Jia Juncai; Chu, W.

2009-01-01

The photodegradation of trichloroethene (TCE) with or without nonaqueous phase liquids (NAPL) by ultraviolet irradiation in surfactant solutions was examined in this study. The photodecay of TCE was studied at monochromatic 254 nm UV lamps. The effects of the type of surfactants, initial surfactant concentrations, pH levels and NAPL concentrations were examined to explore the photodecay of TCE. All the photodegradation of TCE followed pseudo-first-order decay kinetics at various conditions. It was found that Brij 35 overdose and higher initial pH levels may retard or inhibit the photodecay of TCE, mainly due to protons, intermediate generation and change of surfactant structure in the processes. The optimal condition for TCE photodecay was suggested based on the analysis of kinetics data, from which the reaction mechanism of TCE in the presence of NAPL form was also studied. In general, the reactions of TCE in micellar solution and NAPL pool can be considered as independent pathways due to the low molecule diffusion between the two phases

PROBABILISTIC RISK ANALYSIS OF REMEDIATION EFFORTS IN NAPL SITES

Science.gov (United States)

Fernandez-Garcia, D.; de Vries, L.; Pool, M.; Sapriza, G.; Sanchez-Vila, X.; Bolster, D.; Tartakovsky, D. M.

2009-12-01

The release of non-aqueous phase liquids (NAPLs) such as petroleum hydrocarbons and chlorinated solvents in the subsurface is a severe source of groundwater and vapor contamination. Because these liquids are essentially immiscible due to low solubility, these contaminants get slowly dissolved in groundwater and/or volatilized in the vadoze zone threatening the environment and public health over a long period. Many remediation technologies and strategies have been developed in the last decades for restoring the water quality properties of these contaminated sites. The failure of an on-site treatment technology application is often due to the unnoticed presence of dissolved NAPL entrapped in low permeability areas (heterogeneity) and/or the remaining of substantial amounts of pure phase after remediation efforts. Full understanding of the impact of remediation efforts is complicated due to the role of many interlink physical and biochemical processes taking place through several potential pathways of exposure to multiple receptors in a highly unknown heterogeneous environment. Due to these difficulties, the design of remediation strategies and definition of remediation endpoints have been traditionally determined without quantifying the risk associated with the failure of such efforts. We conduct a probabilistic risk assessment of the likelihood of success of an on-site NAPL treatment technology that easily integrates all aspects of the problem (causes, pathways, and receptors). Thus, the methodology allows combining the probability of failure of a remediation effort due to multiple causes, each one associated to several pathways and receptors.

Time-Fractional Advection-Dispersion Equation (tFADE) to Quantify Aqueous Phase Contaminant Elution from a Trichloroethene (TCE) NAPL Source Zone in Sand Columns

Science.gov (United States)

Tick, G. R.; Wei, S.; Sun, H.; Zhang, Y.

2016-12-01

Pore-scale heterogeneity, NAPL distribution, and sorption/desorption processes can significantly affect aqueous phase elution and mass flux in porous media systems. The application of a scale-independent fractional derivative model (tFADE) was used to simulate elution curves for a series of columns (5 cm, 7 cm, 15 cm, 25 cm, and 80 cm) homogeneously packed with 20/30-mesh sand and distributed with uniform saturations (7-24%) of NAPL phase trichloroethene (TCE). An additional set of columns (7 cm and 25 cm) were packed with a heterogeneous distribution of quartz sand upon which TCE was emplaced by imbibing the immiscible liquid, under stable displacement conditions, to simulate a spill-type process. The tFADE model was able to better represent experimental elution behavior for systems that exhibited extensive long-term concentration tailing requiring much less parameters compared to typical multi-rate mass transfer models (MRMT). However, the tFADE model was not able to effectively simulate the entire elution curve for such systems with short concentration tailing periods since it assumes a power-law distribution for the dissolution rate for TCE. Such limitations may be solved using the tempered fractional derivative model, which can capture the single-rate mass transfer process and therefore the short elution concentration tailing behavior. Numerical solution for the tempered fractional-derivative model in bounded domains however remains a challenge and therefore requires further study. However, the tFADE model shows excellent promise for understanding impacts on concentration elution behavior for systems in which physical heterogeneity, non-uniform NAPL distribution, and pronounced sorption-desorption effects dominate or are present.

Comparison of theory and experiment for NAPL dissolution in porous media

Science.gov (United States)

Bahar, T.; Golfier, F.; Oltéan, C.; Lefevre, E.; Lorgeoux, C.

2018-04-01

Contamination of groundwater resources by an immiscible organic phase commonly called NAPL (Non Aqueous Phase Liquid) represents a major scientific challenge considering the residence time of such a pollutant. This contamination leads to the formation of NAPL blobs trapped in the soil and impact of this residual saturation cannot be ignored for correct predictions of the contaminant fate. In this paper, we present results of micromodel experiments on the dissolution of pure hydrocarbon phase (toluene). They were conducted for two values of the Péclet number. These experiments provide data for comparison and validation of a two-phase non-equilibrium theoretical model developed by Quintard and Whitaker (1994) using the volume averaging method. The model was directly upscaled from the averaged pore-scale mass balance equations. The effective properties of the macroscopic model were calculated over periodic unit cells designed from images of the experimental flow cell. Comparison of experimental and numerical results shows that the transport model predicts correctly - with no fitting parameters - the main mechanisms of NAPL mass transfer. The study highlights the crucial need of having a fair recovery of pore-scale characteristic lengths to predict the mass transfer coefficient with accuracy.

Identification of immiscible NAPL contaminant sources in aquifers by a modified two-level saturation based imperialist competitive algorithm

Science.gov (United States)

Ghafouri, H. R.; Mosharaf-Dehkordi, M.; Afzalan, B.

2017-07-01

A simulation-optimization model is proposed for identifying the characteristics of local immiscible NAPL contaminant sources inside aquifers. This model employs the UTCHEM 9.0 software as its simulator for solving the governing equations associated with the multi-phase flow in porous media. As the optimization model, a novel two-level saturation based Imperialist Competitive Algorithm (ICA) is proposed to estimate the parameters of contaminant sources. The first level consists of three parallel independent ICAs and plays as a pre-conditioner for the second level which is a single modified ICA. The ICA in the second level is modified by dividing each country into a number of provinces (smaller parts). Similar to countries in the classical ICA, these provinces are optimized by the assimilation, competition, and revolution steps in the ICA. To increase the diversity of populations, a new approach named knock the base method is proposed. The performance and accuracy of the simulation-optimization model is assessed by solving a set of two and three-dimensional problems considering the effects of different parameters such as the grid size, rock heterogeneity and designated monitoring networks. The obtained numerical results indicate that using this simulation-optimization model provides accurate results at a less number of iterations when compared with the model employing the classical one-level ICA. A model is proposed to identify characteristics of immiscible NAPL contaminant sources. The contaminant is immiscible in water and multi-phase flow is simulated. The model is a multi-level saturation-based optimization algorithm based on ICA. Each answer string in second level is divided into a set of provinces. Each ICA is modified by incorporating a new knock the base model.

The history of the "Virgin with Child" sculpture (Ottaviano, Naples, southern Italy)

DEFF Research Database (Denmark)

Balassone, Giuseppina; Toscano, Maria; Cavazzini, Giancarlo

2014-01-01

A life-size whitish marble statue of a "Virgin with Child" has been recently rediscovered in the St.Rosario church located in Ottaviano, a small town near Naples (southern Italy). This artwork shows stylistic features of the Tuscan-Roman school of the 16th century, and is framed in an intriguing...... historical context. Historical documents testify that the sculpture was a property of the cadet branch of noble Tuscan family of the Medici, the Medici of Ottaviano. A multianalytical approach has been used to try to indicate the supply area of the white marble of the studied sculpture. Considering the whole...... mineralogical, petrographic and geochemical data, the source rock can be possibly limited to the main classical white marbles of the Mediterranean district, as the classical marble of Aphrodisias. A reuse practice of a former artwork can be also hypothesized....

Centro Direzionale of Naples. A “Smart” Concept

Directory of Open Access Journals (Sweden)

Fabrizio Canfora

2014-11-01

Full Text Available The topic of urban planning linked to the growth of smart cities is now quite common also in the urban-sociological debate. Recent studies (Besselaar, Koizumi, 2005; Fistola, 2010 identify the main focus of the smart city no longer exclusively in the strategic role played by ICT infrastructures, but above all in the factors enabling urban growth, defined as the ability to stimulate innovative urban developments, along with an increasing attention to the environment, eco-design, improved living levels, as well as the "bio-socio-environmental capital" (Corbisiero, 2013. Based on this theoretical background, the paper highlights the results of a research conducted in Naples on the empirical case of the "Centro Direzionale". It is an intervention of urban design of considerable impact on the city. The design and construction of the Centro Direzionale of Naples is, in fact, an archetype of the smart city; a primal testing of "urban intelligence" in terms of transport systems, infrastructure, logistics, systems for energy efficiency and technology. More generally, a good practice of city administration and of exploitation of strategic spatial planning.

Integration of numerical modeling and observations for the Gulf of Naples monitoring network

Science.gov (United States)

Iermano, I.; Uttieri, M.; Zambianchi, E.; Buonocore, B.; Cianelli, D.; Falco, P.; Zambardino, G.

2012-04-01

to the cooperation of the Ocean Physics and Modeling Group and of the Atmospheric Modeling and Weather Forecasting Group of the University of Athens (partner of TOSCA project), the model surface air-sea fluxes are computed from the SKIRON Forecasting System. ROMS model is initialized with the High Resolution Atlantic and Mediterranean Product of Mercator Ocean data set and the same data are used as boundary conditions for the western and southern open boundaries of the domain. Realistic model simulations have been performed in the study area for the summer of 2009, in order to make comparisons with specific episodes and structures identified by HF radar data. Typical circulation regimes have been selected from the mentioned year simulation and different flow structures are recognized, that are expected to have a significant effect on the renewal of the coastal waters. The model allows us to further investigate the spatial characteristics of dynamical structures, their generation process and their role in the flushing of the basin improving the understanding of the dynamics governing the circulation of the basin. Model results show a good agreement with HF radar data collected during the analyzed periods in the Gulf of Naples.

Prevalence of alcohol problems among adult somatic in-patients in Naples

DEFF Research Database (Denmark)

Rambaldi, A; Gluud, C; Belli, A

1995-01-01

The aim of this cross-sectional study was to determine the prevalence of alcohol problems among adult somatic in-patients in urban hospitals of Naples. The patients were screened with a structured questionnaire regarding life style. After discharge, the patient records were examined and the hospi......The aim of this cross-sectional study was to determine the prevalence of alcohol problems among adult somatic in-patients in urban hospitals of Naples. The patients were screened with a structured questionnaire regarding life style. After discharge, the patient records were examined...... and the hospital discharge diagnoses were registered. A patient was considered having an alcohol problem if one or more of the following criteria were fulfilled: (1) a Michigan Alcoholism Screening Test score at or above five; (2) a self-reported daily consumption for at least 2 years of at least 60 g of ethanol...

A critical evaluation of the local-equilibrium assumption in modeling NAPL-pool dissolution

Science.gov (United States)

Seagren, Eric A.; Rittmann, Bruce E.; Valocchi, Albert J.

1999-07-01

An analytical modeling analysis was used to assess when local equilibrium (LE) and nonequilibrium (NE) modeling approaches may be appropriate for describing nonaqueous-phase liquid (NAPL) pool dissolution. NE mass-transfer between NAPL pools and groundwater is expected to affect the dissolution flux under conditions corresponding to values of Sh'St (the modified Sherwood number ( Lxkl/ Dz) multiplied by the Stanton number ( kl/ vx))≈400, the NE and LE solutions converge, and the LE assumption is appropriate. Based on typical groundwater conditions, many cases of interest are expected to fall in this range. The parameter with the greatest impact on Sh'St is kl. The NAPL pool mass-transfer coefficient correlation of Pfannkuch [Pfannkuch, H.-O., 1984. Determination of the contaminant source strength from mass exchange processes at the petroleum-ground-water interface in shallow aquifer systems. In: Proceedings of the NWWA/API Conference on Petroleum Hydrocarbons and Organic Chemicals in Ground Water—Prevention, Detection, and Restoration, Houston, TX. Natl. Water Well Assoc., Worthington, OH, Nov. 1984, pp. 111-129.] was evaluated using the toluene pool data from Seagren et al. [Seagren, E.A., Rittmann, B.E., Valocchi, A.J., 1998. An experimental investigation of NAPL-pool dissolution enhancement by flushing. J. Contam. Hydrol., accepted.]. Dissolution flux predictions made with kl calculated using the Pfannkuch correlation were similar to the LE model predictions, and deviated systematically from predictions made using the average overall kl=4.76 m/day estimated by Seagren et al. [Seagren, E.A., Rittmann, B.E., Valocchi, A.J., 1998. An experimental investigation of NAPL-pool dissolution enhancement by flushing. J. Contam. Hydrol., accepted.] and from the experimental data for vx>18 m/day. The Pfannkuch correlation kl was too large for vx>≈10 m/day, possibly because of the relatively low Peclet number data used by Pfannkuch [Pfannkuch, H.-O., 1984. Determination

Theory and numeric modelling of non-isothermal multiphase processes in NAPL-contaminated porous media; Theorie und numerische Modellierung nichtisothermer Mehrphasenprozesse in NAPL-kontaminierten poroesen Medien

Energy Technology Data Exchange (ETDEWEB)

Class, H.

2000-07-01

The author investigates the numeric simulation of physical processes in porous media. The development of the model and its components is described, and the model is validated by laboratory experiments. Differences from the discretization methods BOX and CVFE are discussed as well as the applicability of the multigrid method described for multicomponent approaches. [German] Bei der thermischen Sanierung NAPL-kontaminierter Standorte, z.B. durch Injektion von Wasserdampf und/oder Heissluft, treten nichtisotherme Mehrphasenprozesse auf, die in einem Modell durch eine Betrachtung der Stroemungs- und Transportprozesse als Mehrkomponentensystem beschrieben werden koennen. Dabei ist der Austausch thermischer Energie zwischen den Phasen untereinander und auch dem poroesen Medium selbst, wie auch der Uebergang von Massekomponenten zwischen den Phasen zu beruecksichtigen. Die vorliegende Arbeit behandelt die numerische Simulation derartiger physikalischer Vorgaenge in poroesen Medien. Ausgehend von der Problemstellung wird die Entwicklung eines konzeptionellen Modells (Kap. 2) sowie die Umsetzung der daraus resultierenden mathematischen Gleichungen und dazu erforderlichen Diskretisierungs- und Loesungsmethoden in numerische Algorithmen dargestellt (Kap. 3). Anschliessend wird in Kap. 4 die Faehigkeit des erstelten numerischen Modells ueberprueft, Problemstellungen in natuerlichen Systemen zu simulieren (Vergleich mit Laborexperimenten); ausserdem werden Unterschiede der Diskretisierungsverfahren BOX und CVFE sowie die Anwendbarkeit des in dieser Arbeit fuer Mehrkomponentenformulierungen erweiterten Mehrgitterverfahrens diskutiert. (orig.)

The Impact of Urban Transit Systems on Property Values: A Model and Some Evidences from the City of Naples

Directory of Open Access Journals (Sweden)

Mariano Gallo

2018-01-01

Full Text Available A hedonic model for estimating the effects of transit systems on real estate values is specified and calibrated for the city of Naples. The model is used to estimate the external benefits concerning property values which may be attributed to the Naples metro at the present time and in two future scenarios. The results show that only high-frequency metro lines have appreciable effects on real estate values, while low-frequency metro lines and bus lines produce no significant impacts. Our results show that the impacts on real estate values of the metro system in Naples are significant, with corresponding external benefits estimated at about 7.2 billion euros or about 8.5% of the total value of real estate assets.

Preliminary results of NAPL contamination in a disused industry in the city of Sao Paulo, Brazil, by radon evaluation with CR-39 detectors

International Nuclear Information System (INIS)

Mateus, Crislene; Pecequilo, Brigitte Roxana Soreanu

2015-01-01

Contaminated sites by NAPL (Non-Aqueous Phase-Liquids) may lead to safety risks to human health and to ecosystems, restrictions to urban development and decrease of real estate value. This work used the radon gas as an indicator for the analysis of subsurface soil gas, once this noble gas presents good solubility in a wide range of NAPL, being partially retained in the NAPL contamination. Therefore, a decrease of the activity of radon in the contaminated soil gas can be expected, due to the high capacity of partitioning of radon in NAPL, which allows that the NAPL retain part of the radon previously available in the soil pores. The survey was carried out at a disused industry, contaminated by low volatile NAPL, located at east of Sao Paulo city, in March/2015. Radon was evaluated by passive detection methodology with CR-39 solid state nuclear track detectors (SSNTD). Radon concentrations for the eight monitoring stations at non-contaminated locations in March/2015 varied from 16.4 ± 1.2 kBq.m -3 to 55 ± 4 kBq.m -3 . For the two monitoring stations assumed as contaminated locations in March/2015, radon concentrations were 1.17 ± 0.08 kBq.m -3 and 4.2 ± 0.3 kBq.m -3 , diminished in a range from 92% to 98% when compared with the results for the non-contaminated areas. (author)

Preliminary results of NAPL contamination in a disused industry in the city of Sao Paulo, Brazil, by radon evaluation with CR-39 detectors

Energy Technology Data Exchange (ETDEWEB)

Mateus, Crislene; Pecequilo, Brigitte Roxana Soreanu, E-mail: crislene@ipen.br, E-mail: brigitte@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2015-07-01

Contaminated sites by NAPL (Non-Aqueous Phase-Liquids) may lead to safety risks to human health and to ecosystems, restrictions to urban development and decrease of real estate value. This work used the radon gas as an indicator for the analysis of subsurface soil gas, once this noble gas presents good solubility in a wide range of NAPL, being partially retained in the NAPL contamination. Therefore, a decrease of the activity of radon in the contaminated soil gas can be expected, due to the high capacity of partitioning of radon in NAPL, which allows that the NAPL retain part of the radon previously available in the soil pores. The survey was carried out at a disused industry, contaminated by low volatile NAPL, located at east of Sao Paulo city, in March/2015. Radon was evaluated by passive detection methodology with CR-39 solid state nuclear track detectors (SSNTD). Radon concentrations for the eight monitoring stations at non-contaminated locations in March/2015 varied from 16.4 ± 1.2 kBq.m{sup -3} to 55 ± 4 kBq.m{sup -3}. For the two monitoring stations assumed as contaminated locations in March/2015, radon concentrations were 1.17 ± 0.08 kBq.m{sup -3} and 4.2 ± 0.3 kBq.m{sup -3}, diminished in a range from 92% to 98% when compared with the results for the non-contaminated areas. (author)

Implications of soil mixing for NAPL source zone remediation: Column studies and modeling of field-scale systems.

Science.gov (United States)

Olson, Mitchell R; Sale, Tom C

2015-01-01

Soil remediation is often inhibited by subsurface heterogeneity, which constrains contaminant/reagent contact. Use of soil mixing techniques for reagent delivery provides a means to overcome contaminant/reagent contact limitations. Furthermore, soil mixing reduces the permeability of treated soils, thus extending the time for reactions to proceed. This paper describes research conducted to evaluate implications of soil mixing on remediation of non-aqueous phase liquid (NAPL) source zones. The research consisted of column studies and subsequent modeling of field-scale systems. For column studies, clean influent water was flushed through columns containing homogenized soils, granular zero valent iron (ZVI), and trichloroethene (TCE) NAPL. Within the columns, NAPL depletion occurred due to dissolution, followed by either column-effluent discharge or ZVI-mediated degradation. Complete removal of TCE NAPL from the columns occurred in 6-8 pore volumes of flow. However, most of the TCE (>96%) was discharged in the column effluent; less than 4% of TCE was degraded. The low fraction of TCE degraded is attributed to the short hydraulic residence time (10 m) and reducing permeability by one-or-more orders of magnitude, the residence time could be greatly extended, potentially for periods of years to decades. Model output indicates that the fraction of TCE degraded can be increased to >99.9%, given typical post-mixing soil permeability values. These results suggest that remediation performance can be greatly enhanced by combining contaminant degradation with an extended residence time. Copyright © 2015 Elsevier B.V. All rights reserved.

Mitigation of seismic hazard of a megacity: the case of Naples

Directory of Open Access Journals (Sweden)

G. F. Panza

1995-06-01

Full Text Available The seismic ground motion of a test area in the eastern district of Naples was computed with a hybrid technique based on the rnode surnrnation and the finite difference methods. This technique allowed the realistic modelling of source and propagation effects, including local soil conditions. In the modelling, as seismic source we considered the 1980 Irpinia earthquake, a good example of strong shaking for the area of Naples, located about 90 km from the source. Along a profile through Naples, trencling N86°W, the subsoil is mainly formed by alluvial (ash, stratified sand and peat and pyroclastic materials overlying a pyroclastic rock (yellow Neapolitan tuff representing the Neapolitan bedrock. The detailed information available on the subsoil mechanical properties and its geometry warrants the application of the sophisticated hybrid technique. For SH waves, a comparison was made between a realistic 2-D seismic response and a standard I-D response, based on the vertical propagation of waves in a plane layered structure. As expected the sedimentary cover caused an increase in the signal's amplitudes and duration. If a thin uniform peat layer is present, the amplification effects are reduced, and the peak ground accelerations are similar to those observed for the bedrock model. This can be explained by the backscattering of wave energy at such a laqer. The discrepancies evidenced between the l -D and the 2-D seismic response suggest that serious caution must be taken in the formulation of seismic regulations. This is particularly true in the presence of the thin peat laqer where the misinatch between the l -D and the 2-D amplification functions is particularly evident in correspondence of the dominant peak and of the second significant peak.

Integrated funnel-and-gate/GZB product recovery technologies for in situ management of creosote NAPL-impacted aquifers

International Nuclear Information System (INIS)

Mueller, J.G.; Borchert, S.M.; Klingel, E.J.

1997-01-01

An in situ source management system was modeled and designed for the containment and recovery of creosote non-aqueous phase liquid (NAPL) at a former wood treating facility in Nashua, New Hampshire. The conceptual system was based on the integration of patented technologies for physical source containment and management (ie., funnel-and-gate technology) with patented in situ product recovery (i.e, GZB technology - described below). A funnel-and-gate physical barrier was proposed to mitigate the continued flow of NAPL into the Merrimack River. The purpose of the funnel was to divert groundwater (and potential NAPL) flow through two gate areas. Where required, an in situ system for product recovery was integrated. Mathematical modeling of the combined technologies led to the selection of a metal sheet pile barrier wall along 650 feet of the river's shoreline with the wall anchored into an underlying zone of lesser permeability. Multiple GZB wells were placed strategically within the system. This combination of technologies promised to offer a more effective, cost-efficient approach for long-term management of environmental concerns at Nashua, and related sites

USING PHASE DIAGRAMS TO PREDICT THE PERFORMANCE OF COSOLVENT FLOODS FOR NAPL REMEDIATION

Science.gov (United States)

Cosolvent flooding using water miscible solvents such as alcohols has been proposed as an in-situ NAPL remediation technique. This process is conceptually similar to enhanced oil recovery (EOR) using alcohols and some surfactant formulations. As a result of interest in the EOR ...

HANFORD TANK WASTE OPERATIONS SIMULATOR VERSION DESCRIPTION DOCUMENT

International Nuclear Information System (INIS)

ALLEN, G.K.

2003-01-01

This document describes the software version controls established for the Hanford Tank Waste Operations Simulator (HTWOS). It defines: the methods employed to control the configuration of HTWOS; the version of each of the 26 separate modules for the version 1.0 of HTWOS; the numbering rules for incrementing the version number of each module; and a requirement to include module version numbers in each case results documentation. Version 1.0 of HTWOS is the first version under formal software version control. HTWOS contains separate revision numbers for each of its 26 modules. Individual module version numbers do not reflect the major release HTWOS configured version number

Probabilistic-numerical assessment of pyroclastic current hazard at Campi Flegrei and Naples city: Multi-VEI scenarios as a tool for "full-scale" risk management.

Directory of Open Access Journals (Sweden)

Giuseppe Mastrolorenzo

Full Text Available The Campi Flegrei volcanic field (Italy poses very high risk to the highly urbanized Neapolitan area. Eruptive history was dominated by explosive activity producing pyroclastic currents (hereon PCs; acronym for Pyroclastic Currents ranging in scale from localized base surges to regional flows. Here we apply probabilistic numerical simulation approaches to produce PC hazard maps, based on a comprehensive spectrum of flow properties and vent locations. These maps are incorporated in a Geographic Information System (GIS and provide all probable Volcanic Explosivity Index (VEI scenarios from different source vents in the caldera, relevant for risk management planning. For each VEI scenario, we report the conditional probability for PCs (i.e., the probability for a given area to be affected by the passage of PCs in case of a PC-forming explosive event and related dynamic pressure. Model results indicate that PCs from VEI<4 events would be confined within the Campi Flegrei caldera, PC propagation being impeded by the northern and eastern caldera walls. Conversely, PCs from VEI 4-5 events could invade a wide area beyond the northern caldera rim, as well as part of the Naples metropolitan area to the east. A major controlling factor of PC dispersal is represented by the location of the vent area. PCs from the potentially largest eruption scenarios (analogous to the ~15 ka, VEI 6 Neapolitan Yellow Tuff or even the ~39 ka, VEI 7 Campanian Ignimbrite extreme event would affect a large part of the Campanian Plain to the north and the city of Naples to the east. Thus, in case of renewal of eruptive activity at Campi Flegrei, up to 3 million people will be potentially exposed to volcanic hazard, pointing out the urgency of an emergency plan. Considering the present level of uncertainty in forecasting the future eruption type, size and location (essentially based on statistical analysis of previous activity, we suggest that appropriate planning measures should

Education in Neurology Resident Documentation Using Payroll Simulation.

Science.gov (United States)

Liang, John W; Shanker, Vicki L

2017-04-01

Approaches for teaching neurology documentation include didactic lectures, workshops, and face-to-face meetings. Few studies have assessed their effectiveness. To improve the quality of neurology resident documentation through payroll simulation. A documentation checklist was created based on Medicaid and Medicare evaluation and management (E/M) guidelines. In the preintervention phase, neurology follow-up clinic charts were reviewed over a 16-week period by evaluators blinded to the notes' authors. Current E/M level, ideal E/M level, and financial loss were calculated by the evaluators. Ideal E/M level was defined as the highest billable level based on the documented problems, alongside a supporting history and examination. We implemented an educational intervention that consisted of a 1-hour didactic lecture, followed by e-mail feedback "paystubs" every 2 weeks detailing the number of patients seen, income generated, income loss, and areas for improvement. Follow-up charts were assessed in a similar fashion over a 16-week postintervention period. Ten of 11 residents (91%) participated. Of 214 charts that were reviewed preintervention, 114 (53%) had insufficient documentation to support the ideal E/M level, leading to a financial loss of 24% ($5,800). Inadequate documentation was seen in all 3 components: history (47%), examination (27%), and medical decision making (37%). Underdocumentation did not differ across residency years. Postintervention, underdocumentation was reduced to 14% of 273 visits ( P < .001), with a reduction in the financial loss to 6% ($1,880). Improved documentation and increased potential reimbursement was attained following a didactic lecture and a 16-week period in which individual, specific feedback to neurology residents was provided.

Development of Radon-222 as Natural Tracer for Monitoring the Remediation of NAPL in the Subsurface

International Nuclear Information System (INIS)

Davis, Brian M.; Semprini, Lewis; Istok, Jonathan

2003-01-01

Naturally occurring 222-radon in ground water can potentially be used as an in situ partitioning tracer to characterize dense nonaqueous phase liquid (DNAPL) saturations. The static method involves comparing radon concentrations in water samples from DNAPL-contaminated and non-contaminated portions of an aquifer. During a push-pull test, a known volume of test solution (radon-free water containing a conservation tracer) is first injected (''pushed'') into a well; flow is then reversed and the test solution/groundwater mixture is extracted (''pulled'') from the same well. In the presence of NAPL radon transport is retarded relative to the conservative tracer. Assuming linear equilibrium partitioning, retardation factors for radon can be used to estimate NAPL saturations.The utility of this methodology was evaluated in laboratory and field settings

Top Soils Geochemical and Radioactivity Survey of Naples (Italy) Metropolitan.

Science.gov (United States)

Somma, R.; De Vivo, B.; Cicchella, D.

2001-05-01

The metropolitan area of Naples due to intense human activities is an emblematic area affected by various environmental pollution of soils and waters in addition to hydrogeological volcanic, seismic and bradyseismic hazards. The geology of the area is prevailing represented by volcanics erupted, from the Upper Pleistocene to Recent by Mt. Somma-Vesuvius on the east and the Campi Flegrei fields on the west. The morphology of the metropolitan area of Naples city can be subdivided in flat areas, constituted by reworked pyroclastic terrains, and by hills originated by the overlapping of different welded pyroclastic flows (i.e.: Campanian Ignimbrite and Neapoletan Yellow Tuff) intercalated with pyroclastic deposits of different origins (i.e.: Campi Flegrei, Mt. Somma-Vesuvius, Ischia) and ages. In order to compile a multi-element baseline geochemical and radioactivity mapping of the metropolitan area of the Napoli we have sampled for this study, in situ top soil and imported filling material (mainly soil, volcanic ash, pumice and scoriae). The sampling and radioactivity survey has been carried out on about 200 sampling sites covering an area of about 150 Km2, with a grid of 0.5 x 0.5 km in the urbanised downtown and 1 km x 1 km in the sub urban areas. In each site has been determined a radioactivity by a Scintrex GRS-500 at different emission spectra as total radioactivity (> 0.08 MeV and > 0.40 MeV), 238U (at 1.76 MeV mostly from 214Bi), 232Th (at 2.6 MeV mostly from 208Tl) and 40K (at 1.46 MeV mostly for 40K). The range of values of in situ soils are as follow for the in situ soils (Total radioactivity: 1327- 360 and 114- 47; 238U: 2.6- 1.3; 40K: 8.1- 3.1; 232U: 0.5- 0.1). Analyses of major, metallic elements and pH of each soil sample are in progress, while Pb isotopes compositions, for a selected number of samples, will be determined to discriminate the natural (geogenic) from the anthropogenic components in the soils by versus the anthropogenetic origin. The data

COMPATIBILITY OF NAPLS AND OTHER ORGANIC COMPOUNDS WITH MATERIALS UED IN WELL CONSTRUCTION, SAMPLING, AND REMEDIATION

Science.gov (United States)

Structural integrity of well construction, sampling, and remediation materials may be compromised at many hazardous sites by nonaqueous phase liquids (NAPLs) and their dissolved constituents. A literature review of compatibility theory and qualitative field experiences are provid...

FUTURE PERSPECTIVES IN MELANOMA RESEARCH. Meeting report from the “Melanoma Research: a bridge from Naples to the World. Napoli, December 5th–6 th2011”

Directory of Open Access Journals (Sweden)

Ascierto Paolo A

2012-07-01

Full Text Available Abstract After more than 30 years, landmark progress has been made in the treatment of cancer, and melanoma in particular, with the success of new molecules such as ipilimumab, vemurafenib and active specific immunization. After the first congress in December 2010, the second edition of “Melanoma Research: a bridge from Naples to the World” meeting, organized by Paolo A. Ascierto (INT, Naples, Italy, Francesco M. Marincola (NIH, Bethesda, USA, and Nicola Mozzillo (INT, Naples, Italy took place in Naples, on 5–6 December 2011. We have identified four new topics of discussion: Innovative Approaches in Prevention, Diagnosis and Surgical Treatment, New Pathways and Targets in Melanoma: An Update about Immunotherapy, and Combination Strategies. This international congress gathered more than 30 international faculty members and was focused on recent advances in melanoma molecular biology, immunology and therapy, and created an interactive atmosphere which stimulated discussion of new approaches and strategies in the field of melanoma.

Environmental project and public space rehabilitation: the great project for the historic center of Naples Unesco World Heritage Site

Directory of Open Access Journals (Sweden)

Mario Losasso

2014-05-01

Full Text Available “Historic Centre of Naples, World Heritage Site Enhancement” project has as its goal the rehabilitation of the oldest part of the historic center of Naples, one of the largest and most representative of Europe. The research reference field is placed on the level of strategic approach to the project and process management downstream of EU funding in large cities, with particular multidisciplinary relevance and urban issues of a complex nature. The scientific products of study, training and research were collected in Guidelines for the rehabilitation of public spaces and for sustainable performance of interventions on roads, walkways, squares and urban facilities.

Buildings Indicators for Sustainable Mobility: the District of Naples

Directory of Open Access Journals (Sweden)

Pietro D'Amico

2011-07-01

Full Text Available Mobility is a major component in ensuring freedom of movement and good quality of life. It is strictly associated to the concept of sustainability, considering that more than 70% of European citizens live in urban areas.Traffic volumes and congestion, air quality, noise pollution, consumption of non renewable resources, greenhouse gas emissions, social exclusion and urban sprawl are significant challenges to achieve sustainable urban mobility. This is one of the most important goals of the Coordination Plan of the District of Naples (PTCP. In this paper, we show the process of research, selection, valuation, weighting and synthesis of a set of indicators to monitor sustainable mobility during the realization process of the PTCP.Two urban areas lacking infrastructure connections are considered: North Naples and Giuglianese. According to the Planning Code, the GIS Office and the Planning Office are responsible for choosing the set of indicators and its application, and for evaluating if the goals of the PTCP are achievable and if corrective actions should be undertaken as well.The Environmental Report attached to the Plan sets down to link each topic of the plan to a unique index resulting from a set of specific indicators. One of the results of this study was the selection of 22 indicators for sustainable mobility.They were the outcome of the intersection between the lists available in scientific literature and the databases available for the District of Naples. As set down by the PTCP Planning Code, a top down approach was adopted Therefore indicators were selected by technicians. However, a bottom up approach, i.e. citizenship and stakeholders select indicators, would have resulted in a more transparent process. This study applied a rating method named allocation of budget to weight indicators. Weights determined the importance of each indicator compared to the others.After the weighting procedure, the aggregation of indicators into a single

Poetry or pathology? Jesuit hypochondria in early modern Naples.

Science.gov (United States)

Haskell, Yasmin

2007-01-01

In their didactic poems on fishing and chocolate, both published in 1689, two Neapolitan Jesuits digressed to record and lament a devastating 'plague' of 'hypochondria'. The poetic plagues of Niccolò Giannettasio and Tommaso Strozzi have literary precedents in Lucretius, Vergil, and Fracastoro, but it will be argued that they also have a real, contemporary significance. Hypochondria was considered to be a serious (and epidemic) illness in the seventeenth century, with symptoms ranging from depression to delusions. Not only did our Jesuit poets claim to have suffered from it, but so did prominent members of the 'Accademia degl'Investiganti', a scientific society in Naples that was at odds with both the religious and medical establishments.

Effect of dissolved oxygen manipulation on diffusive emissions from NAPL-impacted low permeability soil layers.

Science.gov (United States)

Clifton, Lisa M; Dahlen, Paul R; Johnson, Paul C

2014-05-06

Aquifer physical model experiments were performed to investigate if diffusive emissions from nonaqueous phase liquid (NAPL)-impacted low-permeability layers into groundwater moving through adjacent NAPL-free high-permeability layers can be reduced by creating an aerobic biotreatment zone at the interface between the two, and if over time that leads to reduced emissions after treatment ceases. Experiments were performed in two 1.2-m long × 1.2-m high × 5.4 cm wide stainless steel tanks; each with a high-permeability sand layer overlying a low-permeability crushed granite layer containing a NAPL mixture of indane and benzene. Each tank was water-saturated with horizontal flow primarily through the sand layer. The influent water was initially deoxygenated and the emissions and concentration distributions were allowed to reach near-steady conditions. The influent dissolved oxygen (DO) level was increased stepwise to 6.5-8.5 mg/L and 17-20 mg/L, and then decreased back to deoxygenated conditions. Each condition was maintained for at least 45 days. Relative to the near-steady benzene emission at the initial deoxygenated condition, the emission was reduced by about 70% when the DO was 6.5-8.5 mg/L, 90% when the DO was 17-20 mg/L, and ultimately 60% when returning to low DO conditions. While the reductions were substantial during treatment, longer-term reductions after 120 d of elevated DO treatment, relative to an untreated condition predicted by theory, were low: 29% and 6% in Tank 1 and Tank 2, respectively. Results show a 1-2 month lag between the end of DO delivery and rebound to the final near-steady emissions level. This observation has implications for post-treatment performance monitoring sampling at field sites.

A three-dimensional multiphase flow model for assesing NAPL contamination in porous and fractured media, 1. Formulation

Science.gov (United States)

Huyakorn, P. S.; Panday, S.; Wu, Y. S.

1994-06-01

A three-dimensional, three-phase numerical model is presented for stimulating the movement on non-aqueous-phase liquids (NAPL's) through porous and fractured media. The model is designed for practical application to a wide variety of contamination and remediation scenarios involving light or dense NAPL's in heterogeneous subsurface systems. The model formulation is first derived for three-phase flow of water, NAPL and air (or vapor) in porous media. The formulation is then extended to handle fractured systems using the dual-porosity and discrete-fracture modeling approaches The model accommodates a wide variety of boundary conditions, including withdrawal and injection well conditions which are treated rigorously using fully implicit schemes. The three-phase of formulation collapses to its simpler forms when air-phase dynamics are neglected, capillary effects are neglected, or two-phase-air-liquid, liquid-liquid systems with one or two active phases are considered. A Galerkin procedure with upstream weighting of fluid mobilities, storage matrix lumping, and fully implicit treatment of nonlinear coefficients and well conditions is used. A variety of nodal connectivity schemes leading to finite-difference, finite-element and hybrid spatial approximations in three dimensions are incorporated in the formulation. Selection of primary variables and evaluation of the terms of the Jacobian matrix for the Newton-Raphson linearized equations is discussed. The various nodal lattice options, and their significance to the computational time and memory requirements with regards to the block-Orthomin solution scheme are noted. Aggressive time-stepping schemes and under-relaxation formulas implemented in the code further alleviate the computational burden.

Software simulator for property investigation of document management system with RFID tags

Directory of Open Access Journals (Sweden)

Kiedrowicz Maciej

2016-01-01

Full Text Available The study outlines the method for examining the properties of the RFID-tagged document management system. The system is composed of computers, where the software for supporting processes of the RFID-tagged doc-uments was installed. Furthermore, the system cooperates with many other elements of the secret office (cabinets, sluices, photocopiers, desks. The examination of the properties of the RFID-tagged document management system is, in this case, complex due to the number of a possible examination scenarios. The simulation method for examining the system properties was proposed. It allows to conduct the examination of the properties in a short period of time for numerous testing scenarios.

Processes controlling the migration and biodegradation of non-aqueous phase liquids (NAPLs) within fractured rocks in the vadose zone. FY96 annual report

Energy Technology Data Exchange (ETDEWEB)

Geller, J.T.; Holman, H.Y.; Conrad, M.; Pruess, K.; Hunter-Cevera, J.C. [Lawrence Berkeley National Lab., CA (United States). Earth Sciences Div.; Su, G. [Univ. of California, Berkeley, CA (United States). Dept. of Civil Engineering

1997-02-01

This project investigates both flow dynamics and microbial processes affecting NAPLs in fractured rock in a closely coupled, integrated manner. The objective is to develop a qualitative and quantitative understanding of the behavior of two and three immiscible fluid phases, microbial transformation and/or degradation, and to provide a scientific basis for field investigations, site characterization, and remedial action for NAPL contamination in fractured rocks. To achieve this, the program combines laboratory and theoretical investigations, coupled with the evaluation of conditions at relevant field sites. This report summarizes the work accomplished since inception of the project in April 1996.

Processes controlling the migration and biodegradation of non-aqueous phase liquids (NAPLs) within fractured rocks in the vadose zone. FY96 annual report

International Nuclear Information System (INIS)

Geller, J.T.; Holman, H.Y.; Conrad, M.; Pruess, K.; Hunter-Cevera, J.C.; Su, G.

1997-02-01

This project investigates both flow dynamics and microbial processes affecting NAPLs in fractured rock in a closely coupled, integrated manner. The objective is to develop a qualitative and quantitative understanding of the behavior of two and three immiscible fluid phases, microbial transformation and/or degradation, and to provide a scientific basis for field investigations, site characterization, and remedial action for NAPL contamination in fractured rocks. To achieve this, the program combines laboratory and theoretical investigations, coupled with the evaluation of conditions at relevant field sites. This report summarizes the work accomplished since inception of the project in April 1996

A Bayesian Approach to Integrate Real-Time Data into Probabilistic Risk Analysis of Remediation Efforts in NAPL Sites

Science.gov (United States)

Fernandez-Garcia, D.; Sanchez-Vila, X.; Bolster, D.; Tartakovsky, D. M.

2010-12-01

The release of non-aqueous phase liquids (NAPLs) such as petroleum hydrocarbons and chlorinated solvents in the subsurface is a severe source of groundwater and vapor contamination. Because these liquids are essentially immiscible due to low solubility, these contaminants get slowly dissolved in groundwater and/or volatilized in the vadoze zone threatening the environment and public health over a long period. Many remediation technologies and strategies have been developed in the last decades for restoring the water quality properties of these contaminated sites. The failure of an on-site treatment technology application is often due to the unnoticed presence of dissolved NAPL entrapped in low permeability areas (heterogeneity) and/or the remaining of substantial amounts of pure phase after remediation efforts. Full understanding of the impact of remediation efforts is complicated due to the role of many interlink physical and biochemical processes taking place through several potential pathways of exposure to multiple receptors in a highly unknown heterogeneous environment. Due to these difficulties, the design of remediation strategies and definition of remediation endpoints have been traditionally determined without quantifying the risk associated with the failure of such efforts. We conduct a probabilistic risk analysis (PRA) of the likelihood of success of an on-site NAPL treatment technology that easily integrates all aspects of the problem (causes, pathways, and receptors) without doing extensive modeling. Importantly, the method is further capable to incorporate the inherent uncertainty that often exist in the exact location where the dissolved NAPL plume leaves the source zone. This is achieved by describing the failure of the system as a function of this source zone exit location, parameterized in terms of a vector of parameters. Using a Bayesian interpretation of the system and by means of the posterior multivariate distribution, the failure of the

Distinctiveness and Sense of Community in the Historical Center of Naples: A Piece of Participatory Action Research

Science.gov (United States)

Arcidiacono, Caterina; Procentese, Fortuna

2005-01-01

Inspired by the impact of an increase in tourism in the Old Center of Naples, Fondazione Laboratorio Mediterraneo, a nonprofit organization that promotes sustainable town development and encourages participation, has undertaken the participatory action research described in this article. The inhabitants' sense of community (McMillan & Chavis,…

A "simulation chain" to define a Multidisciplinary Decision Support System for landslide risk management in pyroclastic soils

Science.gov (United States)

Damiano, E.; Mercogliano, P.; Netti, N.; Olivares, L.

2012-04-01

This paper proposes a Multidisciplinary Decision Support System (MDSS) as an approach to manage rainfall-induced shallow landslides of the flow type (flowslides) in pyroclastic deposits. We stress the need to combine information from the fields of meteorology, geology, hydrology, geotechnics and economics to support the agencies engaged in land monitoring and management. The MDSS consists of a "simulation chain" to link rainfall to effects in terms of infiltration, slope stability and vulnerability. This "simulation chain" was developed at the Euro-Mediterranean Centre for Climate Change (CMCC) (meteorological aspects), at the Geotechnical Laboratory of the Second University of Naples (hydrological and geotechnical aspects) and at the Department of Economics of the University of Naples "Federico II" (economic aspects). The results obtained from the application of this simulation chain in the Cervinara area during eleven years of research allowed in-depth analysis of the mechanisms underlying a flowslide in pyroclastic soil.

Probabilistic-numerical assessment of pyroclastic current hazard at Campi Flegrei and Naples city: Multi-VEI scenarios as a tool for "full-scale" risk management.

Science.gov (United States)

Mastrolorenzo, Giuseppe; Palladino, Danilo M; Pappalardo, Lucia; Rossano, Sergio

2017-01-01

The Campi Flegrei volcanic field (Italy) poses very high risk to the highly urbanized Neapolitan area. Eruptive history was dominated by explosive activity producing pyroclastic currents (hereon PCs; acronym for Pyroclastic Currents) ranging in scale from localized base surges to regional flows. Here we apply probabilistic numerical simulation approaches to produce PC hazard maps, based on a comprehensive spectrum of flow properties and vent locations. These maps are incorporated in a Geographic Information System (GIS) and provide all probable Volcanic Explosivity Index (VEI) scenarios from different source vents in the caldera, relevant for risk management planning. For each VEI scenario, we report the conditional probability for PCs (i.e., the probability for a given area to be affected by the passage of PCs in case of a PC-forming explosive event) and related dynamic pressure. Model results indicate that PCs from VEIextreme event) would affect a large part of the Campanian Plain to the north and the city of Naples to the east. Thus, in case of renewal of eruptive activity at Campi Flegrei, up to 3 million people will be potentially exposed to volcanic hazard, pointing out the urgency of an emergency plan. Considering the present level of uncertainty in forecasting the future eruption type, size and location (essentially based on statistical analysis of previous activity), we suggest that appropriate planning measures should face at least the VEI 5 reference scenario (at least 2 occurrences documented in the last 10 ka).

The Architectural and Environmental Refurbishment of Industrialised Residential Construction. The example of the Selva Cafaro Quarter in Naples

Directory of Open Access Journals (Sweden)

Massimo Perriccioli

2012-10-01

Full Text Available This essay presents the experimental research conducted over the past years by the CHED (Concept House and Environmental Design Research Unit at the “Eduardo Vittoria” School of Architecture and Design in Ascoli Piceno, focused on the theme of Social Housing. The CHED is a temporary research team that proposes a union between diverse know-how, cultures, skills and specialisations, working towards a method of theoretical and conceptual investigation and design and building experiments in the field of innovative construction for sustainable dwelling. In particular, the experience outlined in this text relates to a design experiment completed between 2010 and 2011 and outside the borders of the Marche region, in agreement with the City of Naples' Assessorato all’Edilizia e al Centro Storico (Department of Building and the Historical Centre and focused on the architectural and environmental refurbishment of the residential quarter of Selva Cafaro in San Pietro a Patierno (Naples.

A "simulation chain" to define a Multidisciplinary Decision Support System for landslide risk management in pyroclastic soils

Directory of Open Access Journals (Sweden)

E. Damiano

2012-04-01

Full Text Available This paper proposes a Multidisciplinary Decision Support System (MDSS as an approach to manage rainfall-induced shallow landslides of the flow type (flowslides in pyroclastic deposits. We stress the need to combine information from the fields of meteorology, geology, hydrology, geotechnics and economics to support the agencies engaged in land monitoring and management. The MDSS consists of a "simulation chain" to link rainfall to effects in terms of infiltration, slope stability and vulnerability. This "simulation chain" was developed at the Euro-Mediterranean Centre for Climate Change (CMCC (meteorological aspects, at the Geotechnical Laboratory of the Second University of Naples (hydrological and geotechnical aspects and at the Department of Economics of the University of Naples "Federico II" (economic aspects. The results obtained from the application of this simulation chain in the Cervinara area during eleven years of research allowed in-depth analysis of the mechanisms underlying a flowslide in pyroclastic soil.

Effects of March 20, 2015, partial (~50% solar eclipse on meteorological parameters in the urban area of Naples (Italy

Directory of Open Access Journals (Sweden)

Nicola Scafetta

2016-02-01

Full Text Available During the partial (~50% solar eclipse occurred on March 20, 2015, morning, various meteorological parameters were monitored to study their evolution above the urban area of Naples, central Italy. The experimental conditions were optimal because of the clear sky situation all over Italy, and in Naples in particular. The eclipse last about 2 hours between 9:25:06 (UT+1, local Italian time and 11:43:09 (local Italian time, UT+1. From the observation site, the incoming solar radiation diminished by about 50% at the eclipse peak at 10:32:18 (local Italian time, UT+1, as expected. On the contrary, the UV radiation diminished significantly less, about 25%. This frequency response was likely due to Rayleigh scattering. It suggests that about 50% of the UV radiation reaching the surface was direct light and 50% scattered light. During the eclipse, the urban surface temperature and humidity values stayed almost constant instead of increasing and decreasing, respectively, as predicted by their daily cycle. This result was used to estimate that the average emissivity of the city of Naples is about f = 0.86. The wind speed decreased significantly during the event while the atmospheric pressure stayed constant to decrease only after the eclipse. Finally, we propose a simple empirical method to approximately estimate the cooling effect of an eclipse, which meteorologists could use to correct the temperature model forecast that normally ignores the occurrence of an eclipse. Consistency of these results with the literature and its importance is briefly discussed.

Naples Prognostic Score, Based on Nutritional and Inflammatory Status, is an Independent Predictor of Long-term Outcome in Patients Undergoing Surgery for Colorectal Cancer.

Science.gov (United States)

Galizia, Gennaro; Lieto, Eva; Auricchio, Annamaria; Cardella, Francesca; Mabilia, Andrea; Podzemny, Vlasta; Castellano, Paolo; Orditura, Michele; Napolitano, Vincenzo

2017-12-01

The existing scores reflecting the patient's nutritional and inflammatory status do not include all biomarkers and have been poorly studied in colorectal cancers. The purpose of this study was to assess a new prognostic tool, the Naples prognostic score, comparing it with the prognostic nutritional index, controlling nutritional status score, and systemic inflammation score. This was an analysis of patients undergoing surgery for colorectal cancer. The study was conducted at a university hospital. A total of 562 patients who underwent surgery for colorectal cancer in July 2004 through June 2014 and 468 patients undergoing potentially curative surgery were included. MaxStat analysis dichotomized neutrophil:lymphocyte ratio, lymphocyte:monocyte ratio, prognostic nutritional index, and the controlling nutritional status score. The Naples prognostic scores were divided into 3 groups (group 0, 1, and 2). The receiver operating characteristic curve for censored survival data compared the prognostic performance of the scoring systems. Overall survival and complication rates in all patients, as well as recurrence and disease-free survival rates in radically resected patients, were measured. The Naples prognostic score correlated positively with the other scoring systems (p cancer. See Video Abstract at http://links.lww.com/DCR/A469.

Dissolved organic carbon enhances the mass transfer of hydrophobic organic compounds from Nonaqueous Phase Liquids (NAPLs) into the aqueous phase

NARCIS (Netherlands)

Smith, K.E.C.; Thullner, M.; Wick, L.Y.; Harms, H.

2011-01-01

The hypothesis that dissolved organic carbon (DOC) enhances the mass transfer of hydrophobic organic compounds from nonaqueous phase liquids (NAPLs) into the aqueous phase above that attributable to dissolved molecular diffusion alone was tested. In controlled experiments, mass transfer rates of

Experimental Analyses of Yellow Tuff Spandrels of Post-medieval Buildings in the Naples Area

International Nuclear Information System (INIS)

Calderoni, B.; Cordasco, E. A.; Lenza, P.; Guerriero, L.

2008-01-01

Experimental analyses have been carried out on tuff masonry specimens in order to investigate the structural behaviour of historical buildings in the Naples area (Southern Italy). Spandrels of post-medieval buildings (late XVI to early XX century) have been analysed, with emphasis on morphological characteristics according to chronological indicators. Results of the experimentation on scaled models (1:10) are discussed and the better behaviour of historical masonry typologies on respect to the modern one is highlighted. Comparison with theoretical formulations of ultimate shear resistance are provided too

KNOWLEDGE AND VALORIZATION OF HISTORICAL SITES THROUGH 3D DOCUMENTATION AND MODELING

Directory of Open Access Journals (Sweden)

E. Farella

2016-06-01

Full Text Available The paper presents the first results of an interdisciplinary project related to the 3D documentation, dissemination, valorization and digital access of archeological sites. Beside the mere 3D documentation aim, the project has two goals: (i to easily explore and share via web references and results of the interdisciplinary work, including the interpretative process and the final reconstruction of the remains; (ii to promote and valorize archaeological areas using reality-based 3D data and Virtual Reality devices. This method has been verified on the ruins of the archeological site of Pausilypon, a maritime villa of Roman period (Naples, Italy. Using Unity3D, the virtual tour of the heritage site was integrated and enriched with the surveyed 3D data, text documents, CAAD reconstruction hypotheses, drawings, photos, etc. In this way, starting from the actual appearance of the ruins (panoramic images, passing through the 3D digital surveying models and several other historical information, the user is able to access virtual contents and reconstructed scenarios, all in a single virtual, interactive and immersive environment. These contents and scenarios allow to derive documentation and geometrical information, understand the site, perform analyses, see interpretative processes, communicate historical information and valorize the heritage location.

In Situ Thermal NAPL Remediation at the Northeast Site Pinellas Environmental Restoration Project

International Nuclear Information System (INIS)

Juhlin, R.; Butherus, M.

2006-01-01

The U.S. Department of Energy (DOE) is conducting thermal remediation to remove non-aqueous phase liquids (NAPLs) from the subsurface at the Northeast Site that is part of the Pinellas Environmental Restoration Project. The Northeast Site is located on the Young - Rainey Science, Technology, and Research (STAR) Center in Largo, Florida. The STAR Center was formerly a DOE facility. The NAPL remediation was performed at Area A and is currently being performed at Area B at the Northeast Site. The remediation at Area A was completed in 2003 and covered an area of 900 m 2 (10,000 ft 2 ) and a depth of remediation that extended to 10.7 m (35 ft) below ground surface. Cleanup levels achieved were at or below maximum contaminant levels in almost all locations. The remediation project at Area B is ongoing and covers an area of 3,240 m 2 (36,000 ft 2 ), a volume of 41,300 m (54,000 yd 3), and a depth of remediation to 12 m (40 ft) below ground surface. In addition, a portion of the subsurface under an occupied building in Area B is included in the remediation. The cleanup levels achieved from this remediation will be available in the Area B Final Report that will be posted on the DOE Office of Legacy Management web site (www.lm.doe.gov/land/sites/fl/ pinellas/pinellas.htm) in January 2007. Electrical resistive heating and steam were the chosen remediation methods at both areas. Lessons learned from the Area A remediation were incorporated into the Area B remediation and could benefit managers of similar remediation projects. (authors)

The ShakeMap Atlas for the City of Naples, Italy

Science.gov (United States)

Pierdominici, Simona; Faenza, Licia; Camassi, Romano; Michelini, Alberto; Ercolani, Emanuela; Lauciani, Valentino

2016-04-01

Naples is one of the most vulnerable cities in the world because it is threatened by several natural and man-made hazards: earthquakes, volcanic eruptions, tsunamis, landslides, hydrogeological disasters, and morphologic alterations due to human interference. In addition, the risk is increased by the high density of population (Naples and the surrounding area are among the most populated in Italy), and by the type and condition of buildings and monuments. In light of this, it is crucial to assess the ground shaking suffered by the city. We take into account and integrate data information from five Italian databases and catalogues (DBMI11; CPTI11; CAMAL11; MOLAL08; ITACA) to build a reliable ShakeMap atlas for the area and to recreate the seismic history of the city from historical to recent times (1293 to 1999). This large amount of data gives the opportunity to explore several sources of information, expanding the completeness of our data set in both time and magnitude. 84 earthquakes have been analyzed and for each event, a Shakemap set has been computed using an ad hoc implementation developed for this application: (1) specific ground-motion prediction equations (GMPEs) accounting for the different attenuation properties in volcanic areas compared with the tectonic ones, and (2) detailed local microzonation to include the site effects. The ShakeMap atlas has two main applications: a) it is an important instrument in seismic risk management. It quantifies the level of shaking suffered by a city during its history, and it could be implemented to the quantification of the number of people exposed to certain degrees of shaking. Intensity data provide the evaluation of the damage caused by earthquakes; the damage is closely linked with the ground shaking, building type, and vulnerability, and it is not possible to separate these contributions; b) the Atlas can be used as starting point for Bayesian estimation of seismic hazard. This technique allows for the merging

Simulation Technology Laboratory Building 970 hazards assessment document

International Nuclear Information System (INIS)

Wood, C.L.; Starr, M.D.

1994-11-01

The Department of Energy Order 5500.3A requires facility-specific hazards assessments be prepared, maintained, and used for emergency planning purposes. This hazards assessment document describes the chemical and radiological hazards associated with the Simulation Technology Laboratory, Building 970. The entire inventory was screened according to the potential airborne impact to onsite and offsite individuals. The air dispersion model, ALOHA, estimated pollutant concentrations downwind from the source of a release, taking into consideration the toxicological and physical characteristics of the release site, the atmospheric conditions, and the circumstances of the release. The greatest distances at which a postulated facility event will produce consequences exceeding the ERPG-2 and Early Severe Health Effects thresholds are 78 and 46 meters, respectively. The highest emergency classification is a Site Area Emergency. The Emergency Planning Zone is 100 meters

At the Foot of the Volcano - Organ and Counterpoint in Naples around 1600

Directory of Open Access Journals (Sweden)

Ring, Johannes

2006-12-01

Full Text Available In 1575, Rocco Rodio published a “Fantasia” on the hymnus “Ave maris stella” in Naples in his Libro di ricercate. In the context of the progressive contributions to music for keyboard instruments of his contemporaries Antonio Valente (1575, Claudio Merulo and Andrea Gabrieli, Rodio’s setting of cantus firmus seems nothing short of anachronistic. But Rodio’s intention lies in the implementation of counterpoint. For him, the art of counterpoint was the decisive basis of the composer’s craft. Rodio’s intention is illuminated by the circumstances of his creative activity –the academies in Naples, always eager to dispute,– and by certain events in Rome and Palermo that culminated in the appearance of the Spaniard named Sebastián Raval. The original context regarding the history of music for Rodio’s “Ave maris stella” is in the liturgical organ music by Antonio de Cabezón, Manuel Rodriguez Coelho und Jean Titelouze und perhaps by António Carreira.

1575 veröffentlichte Rocco Rodio in Neapel in seinem Libro di ricercate eine Fantasia über den Kirchenhymnus “Ave maris stella”. Im Kontext der progressiven Beiträge zur Tastenmusik seiner italienischen Zeitgenossen Antonio Valente (1575, Claudio Merulo und Andrea Gabrieli erscheint Rodios Cantus firmus-Satz geradezu anachronistisch. Doch Rodios Intention ist die des Kontrapunktikers. Für ihn war die kontrapunktische Kunst die entscheidende Basis des kompositorischen Handwerkes. Rodios Intention wird beleuchtet durch das Umfeld seines Wirkens –den diskussionsfreudigen Akademien in Neapel– und durch Ereignisse in Rom und Palermo, die im Auftritt des Spaniers Sebastián Raval gipfeln. Ihren eigentlichen musikhistorischen Kontext findet Rodios „Ave maris stella“ in der (liturgischen Orgelmusik von Antonio de Cabezón, Manuel Rodriguez Coelho und Jean Titelouze und vielleicht sogar von António Carreira.

A lead isotope perspective on urban development in ancient Naples.

Science.gov (United States)

Delile, Hugo; Keenan-Jones, Duncan; Blichert-Toft, Janne; Goiran, Jean-Philippe; Arnaud-Godet, Florent; Romano, Paola; Albarède, Francis

2016-05-31

The influence of a sophisticated water distribution system on urban development in Roman times is tested against the impact of Vesuvius volcanic activity, in particular the great eruption of AD 79, on all of the ancient cities of the Bay of Naples (Neapolis). Written accounts on urbanization outside of Rome are scarce and the archaeological record sketchy, especially during the tumultuous fifth and sixth centuries AD when Neapolis became the dominant city in the region. Here we show that isotopic ratios of lead measured on a well-dated sedimentary sequence from Neapolis' harbor covering the first six centuries CE have recorded how the AD 79 eruption was followed by a complete overhaul of Neapolis' water supply network. The Pb isotopic signatures of the sediments further reveal that the previously steady growth of Neapolis' water distribution system ceased during the collapse of the fifth century AD, although vital repairs to this critical infrastructure were still carried out in the aftermath of invasions and volcanic eruptions.

The Accounting Register of a Royal Secretary in Aragonese Naples

Directory of Open Access Journals (Sweden)

Enza Russo

2013-04-01

Full Text Available In the crucial years of the succession war that involved the Kingdom of Naples after Alfonso the Magnanimous’death (1459-1464, a secretary of the new king Ferrante I of Aragon, Antonello Petrucci, was entrusted with royal financial charges. He therefore compiled an account book, where receipts and payments of the royal finances were carefully recorded. It has been recently discovered: this paper aims at examining its actual framework as well as the relative volume of the state budget. Because of its new and comprehensive body of evidence, Petrucci’s account book is a very useful source, which may provide additional informations not only on the bulk of the state funds and expenditure but also on the structure of the king’s household and on the system of the royal financial administration, which appears now as characterized by a more complex organization than it was supposed to be in the past.

The struggle for Via Bologna street market: crisis, racial denial and speaking back to power in Naples Italy.

Science.gov (United States)

Dawes, Antonia

2018-01-10

This paper is based on ethnographic research conducted with migrant and Italian street vendors in Naples, southern Italy, in 2012. It tells the story of Via Bologna market which was nearly closed down by the City Hall at the time. Naples is a city where issues of poverty and unemployment pre-date and have been exacerbated by manifold narratives of crisis now unfolding across Europe regarding the economy, political legitimacy, security and migration. Street markets have always been an important and visible economic survival strategy for both Neapolitans and migrants there. This article shows how the Via Bologna street vendors appropriated and adapted discourses about crisis to form their own cosmopolitan social movement that halted the closure of the market. It argues that, in the age of globalized migration, the multilingual nature of such collective action is central to understanding social struggles that must be organized between marginalized groups of people divided by race, religion, politics and legal status. This, frequently ambiguous, transcultural solidarity speaks back against a mainstream post-racial discourse - often articulated by the Neapolitan street vendors at the market - that would reduce the complexity of such collective action to questions of poverty and class struggle. © London School of Economics and Political Science 2018.

Occurrence and distribution of polycyclic aromatic hydrocarbons in mussels from the gulf of Naples, Tyrrhenian Sea, Italy

International Nuclear Information System (INIS)

Mercogliano, Raffaelina; Santonicola, Serena; De Felice, Alessandra; Anastasio, Aniello; Murru, Nicoletta; Ferrante, Maria Carmela; Cortesi, Maria Luisa

2016-01-01

To assess the potential impact of the industrial activity on food safety and risk for consumers, the aim of the study was to evaluate the levels of 14 polycyclic aromatic hydrocarbons (PAH) in 69 samples of wild and farm Mytilus galloprovincialis, collected in sites of coast of Gulf of Naples, Tyrrhenian Sea. All hydrocarbons were found in samples. Higher levels of pyrolytic PAHs were in wild than in farm mussels. Benzo(a)pyrene exceeded the Regulation (EC) n.835/11 levels of 1 μg/kg in 15 samples (71.42%) of wild and 25 samples (65.79%) of farm mussels. System of sum of 4 hydrocarbons exceeded the law level in 15 samples (71.42%) of wild and 21 samples (55.26%) of farm mussels. Wild mussel levels showed a potential impact of pyrolytic sources of PAH on food safety. Occurrence of carcinogenic PAHs should be a cause for concern, in areas where the mussels are being farmed for human consumption. - Highlights: •Polycyclic aromatic hydrocarbons are genotoxic and carcinogenic organic compounds. •Mussels were used as bio-indicators of the marine pollution and human exposure. •14 PAH were evaluated in wild and farm mussels collected in the Gulf of Naples. •The impact of industrial activity on mussel safety is related to pyrolytic sources. •Carcinogenic PAHs in farm mussels may represent a potential risk for human health.

Translating medical documents improves students' communication skills in simulated physician-patient encounters.

Science.gov (United States)

Bittner, Anja; Bittner, Johannes; Jonietz, Ansgar; Dybowski, Christoph; Harendza, Sigrid

2016-02-27

Patient-physician communication should be based on plain and simple language. Despite communication skill trainings in undergraduate medical curricula medical students and physicians are often still not aware of using medical jargon when communicating with patients. The aim of this study was to compare linguistic communication skills of undergraduate medical students who voluntarily translate medical documents into plain language with students who do not participate in this voluntary task. Fifty-nine undergraduate medical students participated in this study. Twenty-nine participants were actively involved in voluntarily translating medical documents for real patients into plain language on the online-platform https://washabich.de (WHI group) and 30 participants were not (non-WHI group). The assessment resembled a virtual consultation hour, where participants were connected via skype to six simulated patients (SPs). The SPs assessed participants' communication skills. All conversations were transcribed and assessed for communication skills and medical correctness by a blinded expert. All participants completed a self-assessment questionnaire on their communication skills. Across all raters, the WHI group was assessed significantly (p = .007) better than the non-WHI group regarding the use of plain language. The blinded expert assessed the WHI group significantly (p = .018) better regarding the use of stylistic devices of communication. The SPs would choose participants from the WHI group significantly (p = .041) more frequently as their personal physician. No significant differences between the two groups were observed with respect to the medical correctness of the consultations. Written translation of medical documents is associated with significantly more frequent use of plain language in simulated physician-patient encounters. Similar extracurricular exercises might be a useful tool for medical students to enhance their communication skills with

Documenting Climate Models and Simulations: the ES-DOC Ecosystem in Support of CMIP

Science.gov (United States)

Pascoe, C. L.; Guilyardi, E.

2017-12-01

The results of climate models are of increasing and widespread importance. No longer is climate model output of sole interest to climate scientists and researchers in the climate change impacts and adaptation fields. Now non-specialists such as government officials, policy-makers, and the general public, all have an increasing need to access climate model output and understand its implications. For this host of users, accurate and complete metadata (i.e., information about how and why the data were produced) is required to document the climate modeling results. Here we describe the ES-DOC community-govern project to collect and make available documentation of climate models and their simulations for the internationally coordinated modeling activity CMIP6 (Coupled Model Intercomparison Project, Phase 6). An overview of the underlying standards, key properties and features, the evolution from CMIP5, the underlying tools and workflows as well as what modelling groups should expect and how they should engage with the documentation of their contribution to CMIP6 is also presented.

Documenting the NASA Armstrong Flight Research Center Oblate Earth Simulation Equations of Motion and Integration Algorithm

Science.gov (United States)

Clarke, R.; Lintereur, L.; Bahm, C.

2016-01-01

A desire for more complete documentation of the National Aeronautics and Space Administration (NASA) Armstrong Flight Research Center (AFRC), Edwards, California legacy code used in the core simulation has led to this e ort to fully document the oblate Earth six-degree-of-freedom equations of motion and integration algorithm. The authors of this report have taken much of the earlier work of the simulation engineering group and used it as a jumping-o point for this report. The largest addition this report makes is that each element of the equations of motion is traced back to first principles and at no point is the reader forced to take an equation on faith alone. There are no discoveries of previously unknown principles contained in this report; this report is a collection and presentation of textbook principles. The value of this report is that those textbook principles are herein documented in standard nomenclature that matches the form of the computer code DERIVC. Previous handwritten notes are much of the backbone of this work, however, in almost every area, derivations are explicitly shown to assure the reader that the equations which make up the oblate Earth version of the computer routine, DERIVC, are correct.

Polycyclic aromatic hydrocarbons in the urban atmospheric particulate matter in the city of Naples (Italy)

Science.gov (United States)

Caricchia, Anna Maria; Chiavarini, Salvatore; Pezza, Massimo

An investigation on PAH in the atmospheric particulate matter of the city of Naples has been carried out. Urban atmospheric particulate matter was sampled in three sampling sites (West, East and central areas of the city), whose characteristics were representative of the prevailing conditions. In each site, 24 h samplings for 7 consecutive days were performed during three sampling campaigns, in 1996-1997. The results were comparable with those reported in literature for similar investigations. Total PAH were in the range 2-130 ng m -3, with a seasonal variation (autumn/winter vs. summer) in the range 1.5-4.5. The relative contribution of diesel engines vs. gasoline fuelled engines was evidenced.

?Underwater acoustic channel properties ?in the Gulf of Naples and their effects ?on digital data transmission

Directory of Open Access Journals (Sweden)

G. Iannaccone

2007-06-01

Full Text Available ?In this paper we studied the physical properties of the Gulf of Naples (Southern Italy for its use as a commu- nication channel for the acoustic transmission of digital data acquired by seismic instruments on the seafloor to a moored buoy. The acoustic link will be assured by high frequency acoustic modems operating with a central frequency of 100 kHz and a band pass of 10 kHz. The main operational requirements of data transmission con- cern the near horizontal acoustic link, the maximum depth of the sea being about 300 m and the planned hori- zontal distance between seismic instruments and buoy 2 km. This study constructs the signal-to-noise ratio maps to understand the limits beyond which the clarity of the transmission is no longer considered reliable. Using ray- theory, we compute the amplitudes of a transmitted signal at a grid of 21×12 receivers to calculate the transmis- sion loss at each receiver. The signal-to-noise ratio is finally computed for each receiver knowing also the trans- mitter source level and the acoustic noise level in the Gulf of Naples. The results show that the multipath effects predominate over the effects produced by the sound velocity gradient in the sea in the summer period. In the case of omnidirectional transmitters with a Source Level (SL of 165 dB and a baud rate of 2.4 kbit/s, the results al- so show that distances of 1400-1600 m can be reached throughout the year for transmitter-receiver connections below 50 m depth in the underwater acoustic channel.

Underwater acoustic channel properties in the Gulf of Naples and their effects on digital data transmission

Directory of Open Access Journals (Sweden)

G. Iannaccone

2007-06-01

Full Text Available In this paper we studied the physical properties of the Gulf of Naples (Southern Italy for its use as a communication channel for the acoustic transmission of digital data acquired by seismic instruments on the seafloor to a moored buoy. The acoustic link will be assured by high frequency acoustic modems operating with a central frequency of 100 kHz and a band pass of 10 kHz. Since the maximum depth of the sea is about 300 m and the planned horizontal distance between the seismic instruments and the buoy is 2 km, the acoustic data transmission shall be near horizontal. In this study the signal-to-noise ratio is plotted against depth and distance from the source, thus defining the limit after which the transmitted information becomes unreliable. Using ray-theory, we compute the amplitudes of a transmitted signal at a grid of 21×12 receivers to calculate the transmission loss at each receiver. The signal-to-noise ratio is finally computed for each receiver knowing also the transmitter source level and the acoustic noise level in the Gulf of Naples. The results show that the multipath effects predominate over the effects produced by the sound velocity gradient in the sea in the summer period. In the case of omnidirectional transmitters with a Source Level (SL of 165 dB and a bit rate of 2.4 kbit/s, the results also show that distances of 1400-1600 m can be reached throughout the year for transmitter-receiver connections below 50 m depth in the underwater acoustic channel.

Dietary glycemic load and risk of cognitive impairment in women: findings from the EPIC-Naples cohort.

Science.gov (United States)

Simeon, Vittorio; Chiodini, Paolo; Mattiello, Amalia; Sieri, Sabina; Panico, Camilla; Brighenti, Furio; Krogh, Vittorio; Panico, Salvatore

2015-05-01

Cognitive impairment is a common cause of morbidity in the elderly. The relationship between dietary habits and cognitive impairment in a female population living in the metropolitan area of Naples, in the Mediterranean part of Italy, has been evaluated in the Naples EPIC prospective cohort study. The study cohort, enrolled between 1993 and 1997, is composed of 5062 women aged 30-69 years. At time of enrolment anthropometric measures were performed and information about socio-demographic details, clinical data, lifestyle and dietary habits were collected. During 2008 and 2009, women 65 years of age or older received a telephone interview to evaluate cognitive status (TICS); the derived score was used as proxy of cognitive impairment. Analyses were carried out on 1514 participants. Linear regression model showed negative association between TICS score and, respectively, age at baseline (β = -.31, 95% CI -.34, -.24), body mass index (BMI) (β = -.08, 95% CI -.16, -.01), and glycemic load (GL) (β = -.02, 95% CI -.03, -.01), whereas education level (β = 0.62, 95% CI .56, .69) showed positive association. A logistic regression model, used to evaluate determinants of the low cognitive score (TICS score ≤ 15, 1st tertile), confirmed association for previous variables [age (OR 1.1, 95% CI 1.08, 1.15); BMI (OR 1.03, 95% CI 1.001, 1.07); GL (OR 1.005, 95% CI 1.001, 1.011); education level (OR .82, 95% CI .79, .84)] with, in addition, type II diabetes (OR 1.85, 95% CI 1.014, 3.4). This study indicates that GL may play a role in determining risk of cognitive impairment, besides age, BMI, education and diabetes.

Transparency and Documentation in Simulations of Infectious Disease Outbreaks: Towards Evidence-Based Public Health Decisions and Communications

Science.gov (United States)

Ekberg, Joakim; Timpka, Toomas; Morin, Magnus; Jenvald, Johan; Nyce, James M.; Gursky, Elin A.; Eriksson, Henrik

Computer simulations have emerged as important tools in the preparation for outbreaks of infectious disease. To support the collaborative planning and responding to the outbreaks, reports from simulations need to be transparent (accessible) with regard to the underlying parametric settings. This paper presents a design for generation of simulation reports where the background settings used in the simulation models are automatically visualized. We extended the ontology-management system Protégé to tag different settings into categories, and included these in report generation in parallel to the simulation outcomes. The report generator takes advantage of an XSLT specification and collects the documentation of the particular simulation settings into abridged XMLs including also summarized results. We conclude that even though inclusion of critical background settings in reports may not increase the accuracy of infectious disease simulations, it can prevent misunderstandings and less than optimal public health decisions.

The influence of water on the strength of Neapolitan Yellow Tuff, the most widely used building stone in Naples (Italy)

Science.gov (United States)

Heap, Michael J.; Farquharson, Jamie I.; Kushnir, Alexandra R. L.; Lavallée, Yan; Baud, Patrick; Gilg, H. Albert; Reuschlé, Thierry

2018-06-01

Neapolitan Yellow Tuff (NYT) has been used in construction in Naples (Italy) since the Greeks founded the city—then called Neapolis—in the sixth century BCE. We investigate here whether this popular building stone is weaker when saturated with water, an issue important for assessments of weathering damage and monument preservation. To this end, we performed 28 uniaxial compressive strength measurements on dry and water-saturated samples cored from a block of the lithified Upper Member of the NYT. Our experiments show that the strength of the zeolite-rich NYT is systematically reduced when saturated with water (the ratio of wet to dry strength is 0.63). Complementary experiments show that two other common Neapolitan building stones—Piperno Tuff and the grey Campanian Ignimbrite (both facies of the Campanian Ignimbrite deposit devoid of zeolites)—do not weaken when wet. From these data, and previously published data for tuffs around the globe, we conclude that the water-weakening in NYT is a consequence of the presence of abundant zeolites (the block tested herein contains 46 wt.% of zeolites). These data may help explain weathering damage in NYT building stones (due to rainfall, rising damp, and proximity to the sea or water table) and the observed link between rainfall and landslides, rock falls, and sinkhole formation in Naples, and the weathering of other buildings built from zeolite-rich tuffs worldwide.

Geochemical survey of an illegal waste disposal site under a waste emergency scenario (Northwest Naples, Italy).

Science.gov (United States)

Ferrara, L; Iannace, M; Patelli, A M; Arienzo, M

2013-03-01

Since the mid 1980s, Naples and the Campania region have suffered from the dumping of wastes into overfilled landfills. The aim was to characterise a former cave located in Roccarainola (Naples, Italy) for its eventual destination to a controlled landfill site. A detailed hydro-geochemical survey of the area was carried out through drilling of 14 boreholes and four monitoring wells. Samples of water, sediment and soil were analysed for heavy metals and organic contaminants from a dew pond placed in the middle of the cave. The underneath aquifer was also surveyed. The nature of gases emitted from the site was investigated. Results of the geognostic survey revealed the presence of huge volumes of composite wastes, approximately half a million of cubic metre, which accumulated up to a thickness of 25.6 m. In some points, wastes lie below the free surface level of the aquifer. The sampled material from the boreholes revealed levels of As, Cd, Cr, Cu, Hg, Pb, Sn, Tl and Zn exceeding the intervention legal limits. Outstanding loads of Cd, Pb and Zn were found, with levels exceeding of about 50, 100 and 1,870 times the limit. In several points, polycyclic aromatic hydrocarbon load was extremely high, 35 vs 1 mg kg(-1) of the threshold. The aquifer was also very heavily polluted by Cd, Cr-tot, Cu, Fe, Mn, Ni, Pb and Zn, with impressive high load of Cr and Mn, up to 250-370 times the limits. Hot gases up to 62 °C with presence of xylene and ethylbenzene were found. Results indicated that the site needs an urgent intervention of recovery to avoid compromising the surrounding areas and aquifers of the Campania plain.

REPAiR: REsource Management in Peri-urban AReas: Going Beyond Urban Metabolism : D3.3 Process model for the two pilot cases: Amsterdam, the Netherlands & Naples, Italy

NARCIS (Netherlands)

Geldermans, R.J.; Wandl, A.; Steenmeijer, M.A.; Furlan, C.; Streefland, Tamara; Formato, E.; Cerreta, Maria; Amenta, L.; Varju, Viktor; Inglese, Pasquale; Iodice, Silvia; Berruti, Gilda; Varju, Viktor; Grünhut, Z; Bodor, Akos; Lovász, Virág; Moticska, Zsombor; Tonini, Davide; Taelman, Sue Ellen

2018-01-01

Deliverable 3.3 of Work Package 3 concerns an integrated analysis of the two pilot case studies within the REPAiR project, Amsterdam and Naples, from the vantage point of waste production and processing, and the transition to circular societies. It comprises spatial, social and material flow

Determination of NAPL contamination and evolution of remediation by means nuclear techniques

International Nuclear Information System (INIS)

Balcazar, M.; Pena, P.; Lopez, A.; Flores, J. H.; Villegas, D.; Schubert, M.; Knoller, K.

2008-01-01

In this work the application of two nuclear techniques is presented: Natural radioactive tracer and stable isotopics tracer, that allow the localization and delimitation of the contamination in ground and underground water for hydrocarbons denominated NAPL. The work was carry out on the whole and with access permission to facilities and technical information, in a storage center and distribution of fuel of hydrocarbons where occurred a spill for hydrocarbons, approaching actions of remediation that allow to the date to fulfill the normative one applicable. By means of measurement of 222 Rn, in situ, it was possible to be related its ground concentration to the degree of contamination previously determined; the evaluation of 222 Rn in underground water in group with the determination of stable isotope δ 34 S, δ 18 O and δ 13 C as well as the dissolved inorganic coal allowed to locate the contamination source in underground water to 100 m of depth in the aquifer and to determine the existence of a natural bioremediation. (Author)

City/Sea Searching for a New Connection. Regeneration Proposal for Naples Waterfront Like an Harbourscape: Comparing Three Case Studies

Directory of Open Access Journals (Sweden)

Michelangelo Russo

2014-05-01

Full Text Available The port is a strategic area of transition, where it is possible to perceive the territory-landscape and the urban front. However it lost its urban character, gradually becoming an high specialized independent machines, a sectorial infrastructure divided from the city: this phenomenon has created increasingly socio-economical marginalization.  Within a double view, lengthwise and transverse, we can describe the port as a space closed to the city and as an unfathomable barrier for the transverse flows that previously connected the waterfront to the city. The paper examines the case study of Naples, where the port expansion continues to grow without any integration with other parts of the city, distorting its “urban area” role, establishing its independence and making urban system compatibility conditions even weaker. The functional and physical division increases the perception of the port as a barrier rather than a filter. Turning the sense of these conditions aims at rethinking waterfront as a public space, a place where integration and specialization spaces become new open and accessible spatial devices. In some contemporary European and American cities (Aalborg, Oslo and Toronto we could see the port as multifunctional system, an interdisciplinary project that creates urban spaces integrated to the city and that allows the coexistence of different uses. The project of a new public space between the sea and the hinterland could involve all these conflicting functions creating, with different strategies, a potential multifunctional landscape. In Naples as well, where the waterfront is still waiting to be re-connected with the story of the city itself.

A high-resolution ocean circulation model of the Gulf of Naples and adjacent areas

International Nuclear Information System (INIS)

De Ruggero, P.

2013-01-01

The implementation of a high-resolution circulation model of a southern Tyrrhenian coastal area is discussed. The sigma-coordinate Princeton Ocean Model (POM) is implemented with a 1/144° resolution in a domain that includes highly urbanized coastal areas, such as the Gulf of Naples and the nearby gulfs of Gaeta and Salerno, that are particularly relevant from oceanographic, ecological and social viewpoints. The model takes initial and boundary conditions from a 1/48° resolution POM model of the whole Tyrrhenian Sea. The main forcing is provided by ECMWF wind data, but an alternative wind field obtained from the Italian Space Agency COSMO-SkyMed X-band Synthetic Aperture Radar data is also tested. Fundamental aspects of coastal modeling, such as the relative importance of local and remote forcing in semi-enclosed seas, and the sensitivity to different wind products are discussed.

Canine faecal contamination and parasitic risk in the city of Naples (southern Italy

Directory of Open Access Journals (Sweden)

Veneziano Vincenzo

2006-09-01

Full Text Available Abstract Background Dogs are associated with more than 60 zoonotic diseases among which, parasitosis and, in particular, helminthosis, can pose serious public-health concerns worldwide. Many canine gastrointestinal parasites eliminate their dispersion elements (eggs, larvae, oocysts by the faecal route. The quantity of canine faeces deposited on public and private property in cities worldwide is both a perennial nuisance and an important health issue. Public sites such as playgrounds, parks, gardens, public squares and sandpits may be an important source of human infection. The aim of this study was to evaluate the extent of both canine faecal contamination in the city of Naples (southern Italy, and presence of canine parasitic elements, with particular regard to those which are potential agents of zoonosis. A regular grid of sub-areas (1 km × 700 m was overlaid on the city map using a Geographical Information System (GIS. In each sub-area the straightest 1 km transect was drawn and digitalized on-screen in the GIS. Between February and May 2005 canine faeces were counted along the 1 km transects in 143 sub-areas, and 415 canine faecal samples were collected and submitted to coprological examinations. Negative binomial regression models and Gaussian random effects models were used to analyze the association between faeces count and human population density taking into account for extraPoisson variability. Logistic regression model was used to evaluate the association between positivity to parasitic elements and number of canine faeces. Results Out of the 143 studied sub-areas, 141 (98.6% contained canine faeces. There was a strong spatial gradient with 48% of the total variability accounted by between neighbourhood variability; a positive association between the number of faeces and the human population density was found. Seventy (over 415, 16.9% canine faecal samples were positive for parasitic elements. There was no association between

Comparison of residual NAPL source removal techniques in 3D metric scale experiments

Science.gov (United States)

Atteia, O.; Jousse, F.; Cohen, G.; Höhener, P.

2017-07-01

This study compared four treatment techniques for the removal of a toluene/n-decane as NAPL (Non Aqueous Phase Liquid) phase mixture in identical 1 cubic meter tanks filled with different kind of sand. These four treatment techniques were: oxidation with persulfate, surfactant washing with Tween80®, sparging with air followed by ozone, and thermal treatment at 80 °C. The sources were made with three lenses of 26 × 26 × 6.5 cm, one having a hydraulic conductivity similar to the whole tank and the two others a value 10 times smaller. The four techniques were studied after conditioning the tanks with tap water during approximately 80 days. The persulfate treatment tests showed average removal of the contaminants but significant flux decrease if density effects are considered. Surfactant flushing did not show a highly significant increase of the flux of toluene but allowed an increased removal rate that could lead to an almost complete removal with longer treatment time. Sparging removed a significant amount but suggests that air was passing through localized gas channels and that the removal was stagnating after removing half of the contamination. Thermal treatment reached 100% removal after the target temperature of 80 °C was kept during more than 10 d. The experiments emphasized the generation of a high-spatial heterogeneity in NAPL content. For all the treatments the overall removal was similar for both n-decane and toluene, suggesting that toluene was removed rapidly and n-decane more slowly in some zones, while no removal existed in other zones. The oxidation and surfactant results were also analyzed for the relation between contaminant fluxes at the outlet and mass removal. For the first time, this approach clearly allowed the differentiation of the treatments. As a conclusion, experiments showed that the most important differences between the tested treatment techniques were not the global mass removal rates but the time required to reach 99% decrease in

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation, volume 2, part 1. Appendix A: Software documentation

Science.gov (United States)

Lowrie, J. W.; Fermelia, A. J.; Haley, D. C.; Gremban, K. D.; Vanbaalen, J.; Walsh, R. W.

1982-01-01

Documentation of the preliminary software developed as a framework for a generalized integrated robotic system simulation is presented. The program structure is composed of three major functions controlled by a program executive. The three major functions are: system definition, analysis tools, and post processing. The system definition function handles user input of system parameters and definition of the manipulator configuration. The analysis tools function handles the computational requirements of the program. The post processing function allows for more detailed study of the results of analysis tool function executions. Also documented is the manipulator joint model software to be used as the basis of the manipulator simulation which will be part of the analysis tools capability.

Aspects of Land Take in the Metropolitan Area of Naples

Directory of Open Access Journals (Sweden)

Giuseppe Mazzeo

2016-03-01

Full Text Available Land take is a phenomenon of great concern nowadays because of the large number of its negative impacts regarding biological, economic and social balance. In Italy, the development of urban and other artificial land has been irreversibly transforming a non-renewable resource such as soil, regardless the almost constant population rate, with different speed depending of the region considered. The aim of this paper is to analyze the phenomenon in the metropolitan area of Naples, which is an area highly affected by territorial aggression of human matrix. The data used are both by the Institute for Environmental Protection and Research (ISPRA Report 2015 on the usage of the land and by ISTAT relating to the resident population up to the 1st of January 2015 and the extension of land for agricultural use (Census 2010. The mathematical combination of this data creates a new indicator that can be referred to as “residual land”; this residual area is of great extension with many different characteristics and it could represent the area where the phenomenon of land take most occurs. The identification, measurement and analysis of “residual land” provide new insights on the evolution of land take and this new indicator can represent a critical element to work on to prevent future land transformation and protect natural and agricultural areas within the Italian context.

Quench Simulation Studies: Program documentation of SPQR

CERN Document Server

Sonnemann, F

2001-01-01

Quench experiments are being performed on prototypes of the superconducting magnets and busbars to determine the adequate design and protection. Many tests can only be understood correctly with the help of quench simulations that model the thermo-hydraulic and electrodynamic processes during a quench. In some cases simulations are the only method to scale the experimental results of prototype measurements to match the situation of quenching superconducting elements in the LHC. This note introduces the theoretical quench model and the use of the simulation program SPQR (Simulation Program for Quench Research), which has been developed to compute the quench process in superconducting magnets and busbars. The model approximates the heat balance equation with the finite difference method including the temperature dependence of the material parameters. SPQR allows the simulation of longitudinal quench propagation along a superconducting cable, the transverse propagation between adjacent conductors, heat transfer i...

Customer Communication Document

Science.gov (United States)

2009-01-01

This procedure communicates to the Customers of the Automation, Robotics and Simulation Division (AR&SD) Dynamics Systems Test Branch (DSTB) how to obtain services of the Six-Degrees-Of-Freedom Dynamic Test System (SDTS). The scope includes the major communication documents between the SDTS and its Customer. It established the initial communication and contact points as well as provides the initial documentation in electronic media for the customer. Contact the SDTS Manager (SM) for the names of numbers of the current contact points.

Structural diagnosis of historic timber structures: the Diplomatic Room of the of Royal Palace of Naples

Directory of Open Access Journals (Sweden)

Donato Calicchio

2012-12-01

Full Text Available The aim of this article is to describe the diagnosis process made on the timber structure that holds up the vault of the Diplomatic Room of the Royal Palace in Naples (Italy. After a brief historical description of the Royal Palace and the Diplomatic Room, it discusses the methodology according to Italian regulations and the speci­fic problems that arose during the works. To complete the diagnosis, a dendrochronological analysis of the wooden elements was performed. The results show the residual mechanical properties of each structural element and the main problems to be resolved by the restorers. The dendrochronological conclusions yield that the dating of the elements is compatible with that of the frescoes on the vault and therefore demonstrate that the elements have not been replaced.

NASA-STD-7009 Guidance Document for Human Health and Performance Models and Simulations

Science.gov (United States)

Walton, Marlei; Mulugeta, Lealem; Nelson, Emily S.; Myers, Jerry G.

2014-01-01

Rigorous verification, validation, and credibility (VVC) processes are imperative to ensure that models and simulations (MS) are sufficiently reliable to address issues within their intended scope. The NASA standard for MS, NASA-STD-7009 (7009) [1] was a resultant outcome of the Columbia Accident Investigation Board (CAIB) to ensure MS are developed, applied, and interpreted appropriately for making decisions that may impact crew or mission safety. Because the 7009 focus is engineering systems, a NASA-STD-7009 Guidance Document is being developed to augment the 7009 and provide information, tools, and techniques applicable to the probabilistic and deterministic biological MS more prevalent in human health and performance (HHP) and space biomedical research and operations.

New concept to describe three-phase capillary pressure-degree of saturation relationship in porous media.

Science.gov (United States)

Nakamura, Keita; Kikumoto, Mamoru

2018-03-15

The Leverett concept is used conventionally to model the relationship between the capillary pressures and the degrees of saturation in the water-nonaqueous phase liquid (NAPL)-air three-phase system in porous media. In this paper, the limitation of the Leverett concept that the concept is not applicable in the case of nonspreading NAPLs is discussed through microscopic consideration. A new concept that can be applied in the case of nonspreading NAPLs as well as spreading NAPLs is then proposed. The validity of the proposed concept is confirmed by comparing with past experimental data and simulation results obtained using the conventional model based on the Leverett concept. It is confirmed that the proposed concept can correctly predict the observed distributions of NAPLs, including those of nonspreading ones. Copyright © 2018. Published by Elsevier B.V.

Neuropsychology of the Prodrome to Psychosis in the NAPLS Consortium: Relationship to Family History and Conversion to Psychosis

Science.gov (United States)

Seidman, Larry J.; Giuliano, Anthony J.; Meyer, Eric C.; Addington, Jean; Cadenhead, Kristin S.; Cannon, Tyrone D.; McGlashan, Thomas H.; Perkins, Diana O.; Tsuang, Ming T.; Walker, Elaine F.; Woods, Scott W.; Bearden, Carrie E.; Christensen, Bruce K.; Hawkins, Keith; Heaton, Robert; Keefe, Richard S. E.; Heinssen, Robert; Cornblatt, Barbara A.

2011-01-01

Context Early detection and prospective evaluation of clinical high-risk (CHR) individuals who may develop schizophrenia or other psychotic disorders is critical for predicting psychosis onset and for testing preventive interventions. Objective To elucidate the neuropsychology of the CHR syndrome, to determine the association of neuropsychological function with conversion to psychosis and family history (FH) of psychosis, and to examine whether baseline neuropsychological functioning predicts subsequent psychosis. Design, Setting, and Participants Longitudinal study with 2 1/2 years follow-up of 304 prospectively identified CHR individuals meeting Structured Interview for Prodromal Syndromes (SIPS) criteria, 52 non-CHR persons with a FH of psychosis in first- or second-degree relatives (“family HR”/FHR), and 193 normal controls with neither a FH of psychosis nor a CHR syndrome, all of whom had baseline neuropsychological evaluations, recruited across eight centers as part of the North American Prodrome Longitudinal Study (NAPLS). Main Measures A neurocognitive composite score, eight individual neuropsychological measures, an IQ estimate, and HR status. Results Global (“composite”) neuropsychological functioning was comparably impaired in CHR and FHR groups compared to controls, but profiles differed significantly between groups. Neuropsychological functioning in the CHR group was significantly lower in persons who progressed to psychosis than in those who did not, and worst in the subgroup with a FH of psychosis. Tests of processing speed and verbal learning and memory were most sensitive in discriminating CHR from controls, although reductions were less severe than in established schizophrenia. Neuropsychological functioning did not contribute uniquely to the prediction of psychosis beyond clinical criteria, but worse verbal memory predicted more rapid conversion. Conclusion These findings document that CHR individuals have significant neuropsychological

Local materials in the regeneration of urban space of the historic centre of the Metropolitan City of Naples

Directory of Open Access Journals (Sweden)

Paola De Joanna

2015-11-01

Full Text Available The contribution is part of the studies conducted by the Urban Planning Board, Land Management, Environment Laboratory for the “metropolitan city” and the Big Project “Historic centre of Naples, enhancement of the UNESCO site”. Among the issues under discussion, very important for the 92 municipalities of the Metropolitan City, is the preservation of different urban identities which, although united administratively, are claiming their own cultural profile rooted in the urban space, in the architecture of places and in local resources. The work is based on the principle that the use of local resources affects the quality and perception of urban space and, as evidence of belonging to the place, it is necessary to deal its exploitation under sustainable auspices.

Jake Garn Mission Simulator and Training Facility, Building 5, Historical Documentation

Science.gov (United States)

Slovinac, Trish; Deming, Joan

2010-01-01

In response to President George W. Bush's announcement in January 2004 that the Space Shuttle Program (SSP) would end in 2010, the National Aeronautics and Space Administration (NASA) completed a nation-wide historical survey and evaluation of NASA-owned facilities and properties (real property assets) at all its Centers and component facilities. The buildings and structures which supported the SSP were inventoried and assessed as per the criteria of eligibility for listing in the National Register of Historic Places (NRHP) in the context of this program. This study was performed in compliance with Section 110 of the National Historic Preservation Act (NHPA) of 1966 (Public Law 89-665), as amended; the National Environmental Policy Act (NEPA) of 1969 (Public Law 91-190); Executive Order (EO) 11593: Protection and Enhancement of the Cultural Environment; EO 13287, Preserve America, and other relevant legislation. As part of this nation-wide study, in September 2006, historical survey and evaluation of NASA-owned and managed facilities at was conducted by NASA's Lyndon B. Johnson Space Center (JSC) in Houston, Texas. The results of this study are presented in a report entitled, "Survey and Evaluation of NASA-owned Historic Facilities and Properties in the Context of the U.S. Space Shuttle Program, Lyndon B. Johnson Space Center, Houston, Texas," prepared in November 2007 by NASA JSC's contractor, Archaeological Consultants, Inc. As a result of this survey, the Jake Gam Mission Simulator and Training Facility (Building 5) was determined eligible for listing in the NRHP, with concurrence by the Texas State Historic Preservation Officer (SHPO). The survey concluded that Building 5 is eligible for the NRHP under Criteria A and C in the context of the U.S. Space Shuttle program (1969-2010). Because it has achieved significance within the past 50 years, Criteria Consideration G applies. At the time of this documentation, Building 5 was still used to support the SSP as an

Documentation for the viscoplastic and creep program

DEFF Research Database (Denmark)

Bellini, Anna

2004-01-01

of this workpackage is to simulate creep behavior of aluminum cast samples subjected to high temperature. In this document a two-state variables unified model is applied in order to simulate creep behavior and time-dependent metallurgical changes. The fundamental assumption of the unified theory is that creep...... is run using the material data obtained through the mentioned experimental study. The results obtained for the simulation of tensile tests and of creep tests are compared with experimental curves, showing a good agreement. Moreover, the document describes the results obtained during the first...... is quite stable and convergence can be reached also with big time steps. Keywords: Viscoplasticity, creep, unified constitutive model, aluminum, high temperature....

Ágai, Adolf: "Az örök zsidó. Régi naplók, életképek (1862-1906" [The Eternal Jew: Old Diaries and Life Sketches (1862-1906

Directory of Open Access Journals (Sweden)

David Mandler

2011-01-01

Full Text Available Ágai, Adolf. Az örök zsidó. Régi naplók, életképek (1862-1906 [The Eternal Jew: OldDiaries and Life Sketches (1862-1906]. Budapest-Jerusalem: Múlt és Jövő Kiadó,2010. Reviewed by David Mandler, Stuyvesant High School, New York City.

From urchins to sailors: an educative and civic experiment in Naples (1913-1928) - The story of “Caracciolo”, between poverty, social solidarity and education challenges.

OpenAIRE

Maria Antonietta Selvaggio

2014-01-01

This paper proposes to examine Giulia Civita Franceschi’s work in the city of Naples, in favour of abandoned childhood. Between 1913 and 1928, she obtained by the Ministry of Navy and steered the training ship Caracciolo, which became for many urchins their home and family. So, they had the occasion to be saved from misery and delinquency. While before it they crowded streets, squares and arcades of the city, searching charity and ready to steel for surviving, on board ship they became little...

Spatial distribution of heavy metals in solid adjacent to the Naples-Salerno motor way

International Nuclear Information System (INIS)

Imperato, M.; Monetti, V.; Naimo, D.; Stanzione, D.

1999-01-01

This work analyses the distribution of heavy metal in soil adjacent to the Naples-Salerno motor way, an area which typically contains volcanic products from Somma-Vesuvio. The various concentrations of Pb, Cd, Zn, Mn, Cu and Cr found in different portions of the motor way (embankment, road cut, field level) are reported. The data obtained indicate high level of pollution in soil adjacent to the motor way fencing, with maximum concentrations of 1220 ppm Pb, 1.9 ppm Cd and 341 ppm Zn. Gradients of decreasing pollution with distance from the fencing and with altitude from the road surface are highest for Zn followed by Pb and Cd. The presence of these three materials in depth follows an averagely constant falling gradient, with minimum detected values at 50 cm depth. The spatial distribution of Cr does not reveal any significant differences. Relatively big levels are due to the presence in the soil of Chromium-rich minerals such as augite and olivine. Mn and Cu are found, due to local contribution, probably as a consequence of the use of copper compounds in agriculture [it

Operational Requirements Document (ORD) for Warfighters' Simulation (WARSIM) 2000

National Research Council Canada - National Science Library

1997-01-01

.... The WARSIM 2000 simulation system will use a computer based simulation and associated hardware to support the training of unit commanders and their staffs from battalion through theater level as well...

A Decision-Making Framework for Cleanup of Sites Impacted with Light Non-Aqueous Phase Liquids (LNAPL)

Science.gov (United States)

This document has been prepared by the Remediation Technologies Development Forum (RTDF) NAPL Cleanup Alliance to provide a guide to practicable and reasonable approaches for management of LNAPL petroleum hydrocarbons in the subsurface.

Xyce parallel electronic simulator.

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R; Mei, Ting; Russo, Thomas V.; Rankin, Eric Lamont; Schiek, Richard Louis; Thornquist, Heidi K.; Fixel, Deborah A.; Coffey, Todd S; Pawlowski, Roger P; Santarelli, Keith R.

2010-05-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide.

Gomorra: Napoli e la scena fantasmatica del tardo-capitalismo Globale / Gomorra: Naples as the primal fantasy of Late Capitalism

Directory of Open Access Journals (Sweden)

Gabriele Costa

2017-12-01

Full Text Available Il progetto narrativo di Gomorra, nelle sue rimediazioni televisive successive, è stato troppo spesso liquidato come il resoconto di una catabasi nell’impero del male al quale il lettore/spettatore ha accesso attraverso il resoconto autofinzionale e l’obiettivo della telecamera. Mediante la critica lacaniana di Slavoj Žižek, l’analisi dell’opera di Saviano di Fredric Jameson in Valences of Dialectics, il concetto agambeniano di “stato di eccezione”, è a mio avviso possibile sostenere che la Napoli di Gomorra riproduca le coordinate cronotopiche del tardo-capitalismo globale il cui paradigma culturale è caratterizzato dall’esibizione perversa della fantasia fondamentale della società contemporanea. Il presente contributo mira a confutare le letture critiche che individuano nell’opera un appiattimento della finzione letteraria al mimetismo della realtà di cronaca, al fine di dimostrare come la Napoli di Gomorra si configuri di contro come uno scenario fantasmatico, sede di un’umanità colonizzata dalla merce e dalla circolazione impazzita della jouissance del Capitale.     Roberto Saviano’s best seller Gomorra has often been labelled as crime fiction and described as a katabasis in “Hell”, where the reader is drawn into following the uncanny figure of an autofictional author who bears witness to the abjection of this criminal empire. Drawing on the psychoanalytic theories illustrated by Slavoj Žižek and confronting his dialectical-materialistic approach with the analysis conducted by Fredric Jameson and with the idea of “state of exception” by Giorgio Agamben, the scope of this study is to show that the city of Naples depicted in Gomorra represent the chronotope of the contemporary global Capitalism, which is characterized by the obscene exhibition of the pervert fantasy of our society. The present work is intened to refute those critical readings which identify the sylistic devices employed by Saviano

Application of a NAPL partitioning interwell tracer test (PITT) to support DNAPL remediation at the Sandia National Laboratories/New Mexico chemical waste landfill

International Nuclear Information System (INIS)

Studer, J.E.; Mariner, P.; Jin, M.

1996-01-01

Chlorinated solvents as dense non-aqueous phase liquid (DNAPL) are present at a large number of hazardous waste sites across the U.S. and world. DNAPL is difficult to detect in the subsurface, much less characterize to any degree of accuracy. Without proper site characterization, remedial decisions are often difficult to make and technically effective, cost-efficient remediations are even more difficult to obtain. A new non-aqueous phase liquid (NAPL) characterization technology that is superior to conventional technologies has been developed and applied at full-scale. This technology, referred to as the Partitioning Interwell Tracer Test (PITT), has been adopted from oil-field practices and tailored to environmental application in the vadose and saturated zones. A PITT has been applied for the first time at full-scale to characterize DNAPL in the vadose zone. The PITT was applied in December 1995 beneath two side-by-side organic disposal pits at Sandia National Laboratories/New Mexico (SNL/NM) RCRA Interim Status Chemical Waste Landfill (CWL), located in Albuquerque, New Mexico. DNAPL, consisting of a mixture of chlorinated solvents, aromatic hydrocarbons, and PCE oils, is known to exist in at least one of the two buried pits. The vadose zone PITT was conducted by injecting a slug of non-partitioning and NAPL-partitioning tracers into and through a zone of interest under a controlled forced gradient. The forced gradient was created by a balanced extraction of soil gas at a location 55 feet from the injector. The extracted gas stream was sampled over time to define tracer break-through curves. Soil gas sampling ports from multilevel monitoring installations were sampled to define break-through curves at specific locations and depths. Analytical instrumentation such as gas chromatographs and a photoacoustical analyzers operated autonomously, were used for tracer detection

Benthic foraminifera and heavy metals distribution: A case study from the Naples Harbour (Tyrrhenian Sea, Southern Italy)

International Nuclear Information System (INIS)

Ferraro, L.; Sprovieri, M.; Alberico, I.; Lirer, F.; Prevedello, L.; Marsella, E.

2006-01-01

The analysis of 90 surficial sediments from three docks of the Naples Harbour (Levante, Granili, and Diaz) permits to compare the distribution modes of heavy metals with grain sizes, total organic carbon content (TOC) and distribution patterns of benthic foraminifera. Foraminiferal density and species richness decrease with the increasing toxic elements concentrations from the Levante to the Diaz dock. Median concentrations of Ni, Pb, Zn, and Hg (medians of 21.43 mg/kg, 270.24 mg/kg, 489.65 mg/kg, and 1.18 mg/kg, respectively) were reported for the Diaz dock where foraminifera are absent, thus suggesting a possible impact of toxic elements on the benthic ecosystem balance. Compared to the unpolluted marine sediments of the Granili dock, the Levante area shows higher heavy metals levels and a quasi-oligotypic benthic assemblage. This is dominated by the tolerant species Ammonia tepida that may be used as bio-indicator of pollution of anthropised marine sediments. - Benthic foraminiferal density and species distribution may be used as pollution indicators

TMVOC, simulator for multiple volatile organic chemicals

International Nuclear Information System (INIS)

Pruess, Karsten; Battistelli, Alfredo

2003-01-01

TMVOC is a numerical simulator for three-phase non-isothermal flow of water, soil gas, and a multicomponent mixture of volatile organic chemicals (VOCs) in multidimensional heterogeneous porous media. It is an extension of the TOUGH2 general-purpose simulation program developed at the Lawrence Berkeley National Laboratory. TMVOC is designed for applications to contamination problems that involve hydrocarbon fuel or organic solvent spills in saturated and unsaturated zones. It can model contaminant behavior under ''natural'' environmental conditions, as well as for engineered systems, such as soil vapor extraction, groundwater pumping, or steam-assisted source remediation. TMVOC is upwards compatible with T2VOC (Falta et al., 1995) and can be initialized from T2VOC-style initial conditions. The main enhancements in TMVOC relative to T2VOC are as follows: a multicomponent mixture of volatile organic chemicals can be modeled; any and all combinations of the three phases water-oil-gas are treated; several non-condensible gases may be present; diffusion is treated in all phases in a manner that is fully coupled with phase partitioning. This paper gives a brief summary of the methodology used in TMVOC as well as highlighting some implementation issues. Simulation of a NAPL spill and subsequent remediation is discussed for a 2-D vertical section of a saturated-unsaturated flow problem

Forecasting Organized Crime Homicides: Risk Terrain Modeling of Camorra Violence in Naples, Italy.

Science.gov (United States)

Dugato, Marco; Calderoni, Francesco; Berlusconi, Giulia

2017-06-01

Mafia homicides are usually committed for retaliation, economic profit, or rivalry among groups. The variety of possible reasons suggests the inefficacy of a preventive approach. However, like most violent crimes, mafia homicides concentrate in space due to place-specific social and environmental features. Starting from the existing literature, this study applies the Risk Terrain Modeling approach to forecast the Camorra homicides in Naples, Italy. This approach is based on the identification and evaluation of the underlying risk factors able to affect the risk of a homicide. This information is then used to predict the most likely location of future events. The findings of this study demonstrate that past homicides, drug dealing, confiscated assets, and rivalries among groups make it possible to predict up to 85% of 2012 mafia homicides, identifying 11% of city areas at highest risk. By contrast, variables controlling for the socio-economic conditions of areas are not significantly related to the risk of homicide. Moreover, this study shows that, even in a restricted space, the same risk factors may combine in different ways, giving rise to areas of equal risk but requiring targeted remedies. These results provide an effective basis for short- and long-term targeted policing strategies against organized crime- and gang-related violence. A similar approach may also provide practitioners, policy makers, and local administrators in other countries with significant support in understanding and counteracting also other forms of violent behavior by gangs or organized crime groups.

Difficult balances and impossible partners. The implementation local plan for San Giovanni a Teduccio in Naples.

Directory of Open Access Journals (Sweden)

Enrico Formato

2014-02-01

Full Text Available This article is about the processes involved in preparing the preliminary draft of the implementation local plan (ILP of the San Giovanni a Teduccio district of Naples (2008. The plan, drawn up during the activities of the Innovative programme in the urban field (PIAU financed by the Ministry of Infrastructure in 2004, aims to integrate a series of initiatives, already in progress or planned in the district for the designing of public space, by giving special attention to the redevelopment of the waterfront and the strengthening of its relationships with the city. In the given conditions, the solutions proposed by the plan represent the most advanced point of balance between different visions which general urban planning and subsequent programme agreements can bring about. Finally, ILP’s work is subjected to a persistent contradiction, a structural incompatibility between the activities of the commercial port and the renovation of the waterfront: port and city generate a dialectic which, at present, is not conducive either to economic development based on the logistics or to urban renovation. Why don’t we look for other options rather than this unfruitful incompatibility?

HUMTRN: documentation and verification for an ICRP-based age- and sex-specific human simulation model for radionuclide dose assessment

International Nuclear Information System (INIS)

Gallegos, A.F.; Wenzel, W.J.

1984-06-01

The dynamic human simulation model HUMTRN is designed specifically as a major module of BIOTRAN to integrate climatic, hydrologic, atmospheric, food crop, and herbivore simulation with human dietary and physiological characteristics, and metabolism and radionuclides to predict radiation doses to selected organs of both sexes in different age groups. The model is based on age- and weight-specific equations developed for predicting human radionuclide transport from metabolic and physical characteristics. These characteristics are modeled from studies documented by the International Commission on Radiological Protection (ICRP 23). HUMTRN allows cumulative doses from uranium or plutonium radionuclides to be predicted by modeling age-specific anatomical, physiological, and metabolic properties of individuals between 1 and 70 years of age and can track radiation exposure and radionuclide metabolism for any age group for specified daily or yearly time periods. The simulated daily dose integration of eight or more simultaneous air, water, and food intakes gives a new, comprehensive, dynamic picture of radionuclide intake, uptake, and hazard analysis for complex scenarios. A detailed example using site-specific data based on the Pantex studies is included for verification. 14 references, 24 figures, 10 tables

NASA Hybrid Wing Aircraft Aeroacoustic Test Documentation Report

Science.gov (United States)

Heath, Stephanie L.; Brooks, Thomas F.; Hutcheson, Florence V.; Doty, Michael J.; Bahr, Christopher J.; Hoad, Danny; Becker, Lawrence; Humphreys, William M.; Burley, Casey L.; Stead, Dan;

Probabilistic tephra hazard maps for the Neapolitan area: Quantitative volcanological study of Campi Flegrei eruptions

Science.gov (United States)

Mastrolorenzo, G.; Pappalardo, L.; Troise, C.; Panizza, A.; de Natale, G.

2008-07-01

Tephra fall is a relevant hazard of Campi Flegrei caldera (Southern Italy), due to the high vulnerability of Naples metropolitan area to such an event. Here, tephra derive from magmatic as well as phreatomagmatic activity. On the basis of both new and literature data on known, past eruptions (Volcanic Explosivity Index (VEI), grain size parameters, velocity at the vent, column heights and erupted mass), and factors controlling tephra dispersion (wind velocity and direction), 2D numerical simulations of fallout dispersion and deposition have been performed for a large number of case events. A bayesian inversion has been applied to retrieve the best values of critical parameters (e.g., vertical mass distribution, diffusion coefficients, velocity at the vent), not directly inferable by volcanological study. Simulations are run in parallel on multiple processors to allow a fully probabilistic analysis, on a very large catalogue preserving the statistical proprieties of past eruptive history. Using simulation results, hazard maps have been computed for different scenarios: upper limit scenario (worst-expected scenario), eruption-range scenario, and whole-eruption scenario. Results indicate that although high hazard characterizes the Campi Flegrei caldera, the territory to the east of the caldera center, including the whole district of Naples, is exposed to high hazard values due to the dominant westerly winds. Consistently with the stratigraphic evidence of nature of past eruptions, our numerical simulations reveal that even in the case of a subplinian eruption (VEI = 3), Naples is exposed to tephra fall thicknesses of some decimeters, thereby exceeding the critical limit for roof collapse. Because of the total number of people living in Campi Flegrei and the city of Naples (ca. two million of inhabitants), the tephra fallout risk related to a plinian eruption of Campi Flegrei largely matches or exceeds the risk related to a similar eruption at Vesuvius.

A methodology for developing high-integrity knowledge base using document analysis and ECPN matrix analysis with backward simulation

International Nuclear Information System (INIS)

Park, Joo Hyun

1999-02-01

When transitions occur in large systems such as nuclear power plants (NPPs) or industrial process plants, it is often difficult to diagnose them. Various computer-based operator-aiding systems have been developed in order to help operators diagnose the transitions of the plants. In procedures for developing knowledge base system like operator-aiding systems, the knowledge acquisition and the knowledge base verification are core activities. This dissertation describes a knowledge acquisition method and a knowledge base verification method for developing high-integrity knowledge base system of NPP expert systems. The knowledge acquisition is one of the most difficult and time-consuming activities in developing knowledge base systems. There are two kinds of knowledge acquisition methods in view of knowledge sources. One is an acquisition method from human expert. This method, however, is not adequate to acquire the knowledge of NPP expert systems because the number of experts is not sufficient. In this work, we propose a novel knowledge acquisition method through documents analysis. The knowledge base can be built correctly, rapidly, and partially automatically through this method. This method is especially useful when it is difficult to find domain experts. Reliability of knowledge base systems depends on the quality of their knowledge base. Petri Net has been used to verify knowledge bases due to their formal outputs. The methods using Petri Net however are difficult to apply to large and complex knowledge bases because the Net becomes very large and complex. Also, with Petri Net, it is difficult to find proper input patterns that make anomalies occur. In order to overcome this difficulty, in this work, the anomaly candidates detection methods are developed based on Extended CPN (ECPN) matrix analysis. This work also defines the backward simulation of CPN to find compact input patterns for anomaly detection, which starts simulation from the anomaly candidates

User`s guide and documentation manual for ``PC-Gel`` simulator

Energy Technology Data Exchange (ETDEWEB)

Chang, Ming-Ming; Gao, Hong W.

1993-10-01

PC-GEL is a three-dimensional, three-phase (oil, water, and gas) permeability modification simulator developed by incorporating an in-situ gelation model into a black oil simulator (BOAST) for personal computer application. The features included in the simulator are: transport of each chemical species of the polymer/crosslinker system in porous media, gelation reaction kinetics of the polymer with crosslinking agents, rheology of the polymer and gel, inaccessible pore volume to macromolecules, adsorption of chemical species on rock surfaces, retention of gel on the rock matrix, and permeability reduction caused by the adsorption of polymer and gel. The in-situ gelation model and simulator were validated against data reported in the literature. The simulator PC-GEL is useful for simulating and optimizing any combination of primary production, waterflooding, polymer flooding, and permeability modification treatments. A general background of permeability modification using crosslinked polymer gels is given in Section I and the governing equations, mechanisms, and numerical solutions of PC-GEL are given in Section II. Steps for preparing an input data file with reservoir and gel-chemical transport data, and recurrent data are described in Sections III and IV, respectively. Example data inputs are enclosed after explanations of each input line to help the user prepare data files. Major items of the output files are reviewed in Section V. Finally, three sample problems for running PC-GEL are described in Section VI, and input files and part of the output files of these problems are listed in the appendices. For the user`s reference a copy of the source code of PC-GEL computer program is attached in Appendix A.

Optimization of the Document Placement in the RFID Cabinet

Directory of Open Access Journals (Sweden)

Kiedrowicz Maciej

2016-01-01

Full Text Available The study is devoted to the issue of optimization of the document placement in a single RFID cabinet. It has been assumed that the optimization problem means the reduction of archivization time with respect to the information on all documents with RFID tags. Since the explicit form of the criterion function remains unknown, for the purpose of its approximation, the regression analysis method has been used. The method uses data from a computer simulation of the process of archiving data about documents. To solve the optimization problem, the modified gradient projection method has been used.

Nonlinear filtering for character recognition in low quality document images

Science.gov (United States)

Diaz-Escobar, Julia; Kober, Vitaly

2014-09-01

Optical character recognition in scanned printed documents is a well-studied task, where the captured conditions like sheet position, illumination, contrast and resolution are controlled. Nowadays, it is more practical to use mobile devices for document capture than a scanner. So as a consequence, the quality of document images is often poor owing to presence of geometric distortions, nonhomogeneous illumination, low resolution, etc. In this work we propose to use multiple adaptive nonlinear composite filters for detection and classification of characters. Computer simulation results obtained with the proposed system are presented and discussed.

PORFLOW TESTING AND VERIFICATION DOCUMENT

International Nuclear Information System (INIS)

Aleman, S

2007-01-01

The PORFLOW software package is a comprehensive mathematical model for simulation of multi-phase fluid flow, heat transfer and mass transport in variably saturated porous and fractured media. PORFLOW can simulate transient or steady-state problems in Cartesian or cylindrical geometry. The porous medium may be anisotropic and heterogeneous and may contain discrete fractures or boreholes with the porous matrix. The theoretical models within the code provide a unified treatment of concepts relevant to fluid flow and transport. The main features of PORFLOW that are relevant to Performance Assessment modeling at the Savannah River National Laboratory (SRNL) include variably saturated flow and transport of parent and progeny radionuclides. This document involves testing a relevant sample of problems in PORFLOW and comparing the outcome of the simulations to analytical solutions or other commercial codes. The testing consists of the following four groups. Group 1: Groundwater Flow; Group 2: Contaminant Transport; Group 3: Numerical Dispersion; and Group 4: Keyword Commands

Thinking with the saint: the miracle of Saint Januarius of Naples and science in early modern Europe.

Science.gov (United States)

de Ceglia, Francesco Paolo

2014-01-01

The aim of this paper is to reconstruct the way in which early modem science questioned and indirectly influenced (while being in its turn influenced by) the conceptualization of the liquefaction of the blood of Saint Januarius, a phenomenon that has been taking place at regular intervals in Naples since the late Middle Ages. In the seventeenth century, a debate arose that divided Europe between supporters of a theory of divine intervention and believers in the occult properties of the blood. These two theoretical options reflected two different perspectives on the relationship between the natural and the supernatural. While in the seventeenth century, the emphasis was placed on the predictable periodicity of the miraculous event of liquefaction as a manifestation of God in his role as a divine regulator, in the eighteenth century the event came to be described as capricious and unpredictable, in an attempt to differentiate miracles from the workings of nature, which were deemed to be normative. The miracle of the blood of Saint Januarius thus provides a window through which we can catch a glimpse of how the natural order was perceived in early modern Europe at a time when the Continent was culturally fragmented into north and south, Protestantism and Catholicism, learned and ignorant.

Atmospheric trace metal pollution in the Naples urban area based on results from moss and lichen bags

International Nuclear Information System (INIS)

Giordano, S.; Adamo, P.; Sorbo, S.; Vingiani, S.

2005-01-01

The results of trace element content analysed in Sphagnum capillifolium and Pseudevernia furfuracea exposed in bags in 1999 are reconsidered to evaluate the reliability of moss and lichen transplants to detect urban trace element atmospheric pollution, using Naples as a case example. After 4 months' exposure, trace element concentrations were at least twice as high as the pre-exposure values and in general higher in Sphagnum than in Pseudevernia. Moss samples were enriched in the following order: As = Cu > Mo > Pb > V > Co > Cr > Zn; lichen samples in the order: Mo > Cu > As = Co = Ni > V > Pb. Based on the calculation of a cumulative load factor, all sites located along the coast had higher trace element loads compared to sites in the hilly inland area. Complementary SEM, TEM and EDS observations showed, despite significant damage to tissue and cell integrity, the recurrent presence of particulate matter in moss and lichen, indicating the considerable presence of dust in the urban atmosphere which, according to chemical composition, may be due both to anthropogenic and natural sources such as volcanic rock and soil and sea salts. - Despite significant damage to tissue and cell integrity, moss and lichen in bags efficiently intercept airborne trace elements

Film-Induced Tourism, City-Branding and Place-Based Image: the Cityscape of Naples between Authenticity and Conflicts

Directory of Open Access Journals (Sweden)

Libera D'Alessandro

2015-03-01

Full Text Available The paper aims at analysing the connections between film-induced tourism, city-branding and place-based image through the case-study of Naples, particularly deepening the role played by urban policies not only in promoting or sustaining but also in refusing some specific city’s representations. In the first part we will explore this relationship focusing the attention on the changing representations of the city in films and on the changes produced by the urban policies carried out in the phase of so-called Neapolitan Renaissance. The second part will be dedicated to deepen the link between the images of the city conveyed by the media and the touristic sector, emphasizing the role of the official representations and of the Campania Region Film Commission. The third part of the paper will focus on the conflicts involving the urban actors about the existence of a potential link between some negative representations of the periodical crisis of the city (for garbage, organized crime and difficulties in the administrative management and tourist flows. We will argue that the duplicity of representations proposes in a new way the traditional dual image of the Neapolitan cityscape, inspiring by a different notion of “authenticity”.

Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture

Science.gov (United States)

Sanfilippo, Antonio [Richland, WA; Calapristi, Augustin J [West Richland, WA; Crow, Vernon L [Richland, WA; Hetzler, Elizabeth G [Kennewick, WA; Turner, Alan E [Kennewick, WA

2009-12-22

Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture are described. In one aspect, a document clustering method includes providing a document set comprising a plurality of documents, providing a cluster comprising a subset of the documents of the document set, using a plurality of terms of the documents, providing a cluster label indicative of subject matter content of the documents of the cluster, wherein the cluster label comprises a plurality of word senses, and selecting one of the word senses of the cluster label.

Xyce parallel electronic simulator : reference guide.

Energy Technology Data Exchange (ETDEWEB)

Mei, Ting; Rankin, Eric Lamont; Thornquist, Heidi K.; Santarelli, Keith R.; Fixel, Deborah A.; Coffey, Todd Stirling; Russo, Thomas V.; Schiek, Richard Louis; Warrender, Christina E.; Keiter, Eric Richard; Pawlowski, Roger Patrick

2011-05-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide. The Xyce Parallel Electronic Simulator has been written to support, in a rigorous manner, the simulation needs of the Sandia National Laboratories electrical designers. It is targeted specifically to run on large-scale parallel computing platforms but also runs well on a variety of architectures including single processor workstations. It also aims to support a variety of devices and models specific to Sandia needs. This document is intended to complement the Xyce Users Guide. It contains comprehensive, detailed information about a number of topics pertinent to the usage of Xyce. Included in this document is a netlist reference for the input-file commands and elements supported within Xyce; a command line reference, which describes the available command line arguments for Xyce; and quick-references for users of other circuit codes, such as Orcad's PSpice and Sandia's ChileSPICE.

World energy projection system: Model documentation

Science.gov (United States)

1992-06-01

The World Energy Project System (WEPS) is an accounting framework that incorporates projects from independently documented models and assumptions about the future energy intensity of economic activity (ratios of total energy consumption divided by gross domestic product) and about the rate of incremental energy requirements met by hydropower, geothermal, coal, and natural gas to produce projections of world energy consumption published annually by the Energy Information Administration (EIA) in the International Energy Outlook (IEO). Two independently documented models presented in Figure 1, the Oil Market Simulation (OMS) model and the World Integrated Nuclear Evaluation System (WINES), provide projections of oil and nuclear power consumption published in the IEO. Output from a third independently documented model, and the International Coal Trade Model (ICTM), is not published in the IEO but is used in WEPS as a supply check on projections of world coal consumption produced by WEPS and published in the IEO. A WEPS model of natural gas production documented in this report provides the same type of implicit supply check on the WEPS projections of world natural gas consumption published in the IEO. Two additional models are included in Figure 1, the OPEC Capacity model and the Non-OPEC Oil Production model. These WEPS models provide inputs to the OMS model and are documented in this report.

World energy projection system: Model documentation

International Nuclear Information System (INIS)

1992-06-01

The World Energy Project System (WEPS) is an accounting framework that incorporates projects from independently documented models and assumptions about the future energy intensity of economic activity (ratios of total energy consumption divided by gross domestic product) and about the rate of incremental energy requirements met by hydropower, geothermal, coal, and natural gas to produce projections of world energy consumption published annually by the Energy Information Administration (EIA) in the International Energy Outlook (IEO) (Figure 1). Two independently documented models presented in Figure 1, the Oil Market Simulation (OMS) model and the World Integrated Nuclear Evaluation System (WINES) provide projections of oil and nuclear power consumption published in the IEO. Output from a third independently documented model, and the International Coal Trade Model (ICTM), is not published in the IEO but is used in WEPS as a supply check on projections of world coal consumption produced by WEPS and published in the IEO. A WEPS model of natural gas production documented in this report provides the same type of implicit supply check on the WEPS projections of world natural gas consumption published in the IEO. Two additional models are included in Figure 1, the OPEC Capacity model and the Non-OPEC Oil Production model. These WEPS models provide inputs to the OMS model and are documented in this report

Flexigas Simulator Architectuur (versie 1.0)

NARCIS (Netherlands)

Jonge, M. de; Broekhuijsen, B.J.; Vonder, M.R.

2011-01-01

Doel van dit document is om een (high level) architectuur te beschrijven aan de hand waarvan binnen het project Flexigas een simulator voor een Smart Biogas Grid ontwikkeld kan worden. Het document is primair geschreven voor de ontwikkelaars van de simulator, maar zal ook gebruikt worden in de

Historical sources about diseases, death and embalming regarding the family of Jean Antoine Michel Agar, Minister of Finance of Gioacchino Murat.

Science.gov (United States)

Marinozzi, S; Gazzaniga, V; Giuffra, V; Fornaciari, G

2011-06-01

Among the mummies preserved in the Basilica of San Domenico Maggiore in Naples, there are the bodies of the wife and three children of Jean Antoine Michel Agar, Minister of Finance of Naple's Kingdom during the Monarchy of Joachim Murat (1808-1815). Between 1983 and 1987 paleopathological analyses were performed; in particular, X-ray examination allowed investigation of the health status of the Agar family members and reconstruction of the embalming processes used to preserve the bodies. In addition, an analysis of the historical and archival documents was carried out, to formulate hypotheses about the causes of death, demonstrating how these sources could become important instruments to obtain diagnoses and pathological histories.

NAPL migration and ecotoxicity of conventional and renewable fuels in accidental spill scenarios.

Science.gov (United States)

Malk, Vuokko; Barreto Tejera, Eduardo; Simpanen, Suvi; Dahl, Mari; Mäkelä, Riikka; Häkkinen, Jani; Kiiski, Anna; Penttinen, Olli-Pekka

2014-01-01

Fuels derived from non-petroleum renewable resources have raised interest due to their potential in replacing petroleum-based fuels, but information on their fate and effects in the terrestrial and aquatic environments in accidental spill scenario is limited. In this study, migration of four fuels (conventional diesel, conventional gasoline, renewable diesel NExBTL, and ethanol-blended gasoline RE85 containing maximum 85% ethanol) as non-aqueous phase liquids (NAPL) in soil was demonstrated in a laboratory-scale experiment. Ecotoxicity data was produced for the same fuels. There was no significant difference in migration of conventional and renewable diesel, but gasoline migrated 1.5 times deeper and 7-9 times faster in sand than diesel. RE85 spread horizontally wider but not as deep (p gasoline. Conventional gasoline was the most toxic (lethal concentration [LC50] 20 mg/kg total hydrocarbon content [THC]) among the studied fuels in soil toxicity test with earthworm Eisenia fetida followed by ethanol-blended gasoline (LC50 1,643 mg/kg THC) and conventional diesel (LC50 2,432 mg/kg THC), although gasoline evaporated fast from soil. For comparison, the toxicity of the water-accommodated fractions (WAF) of the fuels was tested with water flea Daphnia magna and Vibrio fischeri, also demonstrating groundwater toxicity. The WAF of conventional gasoline and RE85 showed almost similar toxicity to both the aquatic test species. EC50 values of 1:10 (by volume) WAF were 9.9 %WAF (gasoline) and 9.3 %WAF (RE85) to D. magna and 9.3 %WAF (gasoline) and 12.3 %WAF (RE85) to V. fischeri. Low solubility decreased toxicity potential of conventional diesel in aquatic environment, but direct physical effects of oil phase pose a threat to organisms in nature. Renewable diesel NExBTL did not show clear toxicity to any test species.

Emergency medicine resident physicians' perceptions of electronic documentation and workflow: a mixed methods study.

Science.gov (United States)

Neri, P M; Redden, L; Poole, S; Pozner, C N; Horsky, J; Raja, A S; Poon, E; Schiff, G; Landman, A

2015-01-01

To understand emergency department (ED) physicians' use of electronic documentation in order to identify usability and workflow considerations for the design of future ED information system (EDIS) physician documentation modules. We invited emergency medicine resident physicians to participate in a mixed methods study using task analysis and qualitative interviews. Participants completed a simulated, standardized patient encounter in a medical simulation center while documenting in the test environment of a currently used EDIS. We recorded the time on task, type and sequence of tasks performed by the participants (including tasks performed in parallel). We then conducted semi-structured interviews with each participant. We analyzed these qualitative data using the constant comparative method to generate themes. Eight resident physicians participated. The simulation session averaged 17 minutes and participants spent 11 minutes on average on tasks that included electronic documentation. Participants performed tasks in parallel, such as history taking and electronic documentation. Five of the 8 participants performed a similar workflow sequence during the first part of the session while the remaining three used different workflows. Three themes characterize electronic documentation: (1) physicians report that location and timing of documentation varies based on patient acuity and workload, (2) physicians report a need for features that support improved efficiency; and (3) physicians like viewing available patient data but struggle with integration of the EDIS with other information sources. We confirmed that physicians spend much of their time on documentation (65%) during an ED patient visit. Further, we found that resident physicians did not all use the same workflow and approach even when presented with an identical standardized patient scenario. Future EHR design should consider these varied workflows while trying to optimize efficiency, such as improving

Simulator configuration management system

International Nuclear Information System (INIS)

Faulent, J.; Brooks, J.G.

1990-01-01

The proposed revisions to ANS 3.5-1985 (Section 5) require Utilities to establish a simulator Configuration Management System (CMS). The proposed CMS must be capable of: Establishing and maintaining a simulator design database. Identifying and documenting differences between the simulator and its reference plant. Tracking the resolution of identified differences. Recording data to support simulator certification, testing and maintenance. This paper discusses a CMS capable of meeting the proposed requirements contained in ANS 3.5. The system will utilize a personal computer and a relational database management software to construct a simulator design database. The database will contain records to all reference nuclear plant data used in designing the simulator, as well as records identifying all the software, hardware and documentation making up the simulator. Using the relational powers of the database management software, reports will be generated identifying the impact of reference plant changes on the operation of the simulator. These reports can then be evaluated in terms of training needs to determine if changes are required for the simulator. If a change is authorized, the CMS will track the change through to its resolution and then incorporate the change into the simulator design database

Xyce™ Parallel Electronic Simulator: Reference Guide, Version 5.1

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical and Microsystems Modeling; Mei, Ting [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical and Microsystems Modeling; Russo, Thomas V. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical and Microsystems Modeling; Rankin, Eric Lamont [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical and Microsystems Modeling; Schiek, Richard Louis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical and Microsystems Modeling; Santarelli, Keith R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical and Microsystems Modeling; Thornquist, Heidi K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical and Microsystems Modeling; Fixel, Deborah A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical and Microsystems Modeling; Coffey, Todd S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Applied Mathematics and Applications; Pawlowski, Roger P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Applied Mathematics and Applications

2009-11-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users’ Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users’ Guide.

Xyce Parallel Electronic Simulator : reference guide, version 4.1.

Energy Technology Data Exchange (ETDEWEB)

Mei, Ting; Rankin, Eric Lamont; Thornquist, Heidi K.; Santarelli, Keith R.; Fixel, Deborah A.; Coffey, Todd Stirling; Russo, Thomas V.; Schiek, Richard Louis; Keiter, Eric Richard; Pawlowski, Roger Patrick

2009-02-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide.

Large-Scale Multi-Dimensional Document Clustering on GPU Clusters

Energy Technology Data Exchange (ETDEWEB)

Cui, Xiaohui [ORNL; Mueller, Frank [North Carolina State University; Zhang, Yongpeng [ORNL; Potok, Thomas E [ORNL

2010-01-01

Document clustering plays an important role in data mining systems. Recently, a flocking-based document clustering algorithm has been proposed to solve the problem through simulation resembling the flocking behavior of birds in nature. This method is superior to other clustering algorithms, including k-means, in the sense that the outcome is not sensitive to the initial state. One limitation of this approach is that the algorithmic complexity is inherently quadratic in the number of documents. As a result, execution time becomes a bottleneck with large number of documents. In this paper, we assess the benefits of exploiting the computational power of Beowulf-like clusters equipped with contemporary Graphics Processing Units (GPUs) as a means to significantly reduce the runtime of flocking-based document clustering. Our framework scales up to over one million documents processed simultaneously in a sixteennode GPU cluster. Results are also compared to a four-node cluster with higher-end GPUs. On these clusters, we observe 30X-50X speedups, which demonstrates the potential of GPU clusters to efficiently solve massive data mining problems. Such speedups combined with the scalability potential and accelerator-based parallelization are unique in the domain of document-based data mining, to the best of our knowledge.

Xyce™ Parallel Electronic Simulator Reference Guide Version 6.8

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Aadithya, Karthik Venkatraman [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mei, Ting [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Russo, Thomas V. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schiek, Richard L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sholander, Peter E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Thornquist, Heidi K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Verley, Jason C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-10-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users' Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce . This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users' Guide.

A New Wavelet-Based Document Image Segmentation Scheme

Institute of Scientific and Technical Information of China (English)

赵健; 李道京; 俞卞章; 耿军平

2002-01-01

The document image segmentation is very useful for printing, faxing and data processing. An algorithm is developed for segmenting and classifying document image. Feature used for classification is based on the histogram distribution pattern of different image classes. The important attribute of the algorithm is using wavelet correlation image to enhance raw image's pattern, so the classification accuracy is improved. In this paper document image is divided into four types: background, photo, text and graph. Firstly, the document image background has been distingusished easily by former normally method; secondly, three image types will be distinguished by their typical histograms, in order to make histograms feature clearer, each resolution' s HH wavelet subimage is used to add to the raw image at their resolution. At last, the photo, text and praph have been devided according to how the feature fit to the Laplacian distrbution by -X2 and L. Simulations show that classification accuracy is significantly improved. The comparison with related shows that our algorithm provides both lower classification error rates and better visual results.

Heavy Metals Concentrations in top Soils of Urban Areas (Naples - Southern Italy) as an Indicator of Anthropogenic Origin.

Science.gov (United States)

Cicchella, D.; De Vivo, B.; Lima, A.; Somma, R.

2001-12-01

Heavy metals pollution, which mainly originates from automobile exhausts and industry, is a serious danger for human health. The source and extension of heavy metals pollution in the top soils has been studied extensively in the past 30 years. The role of the soil processes in accumulating or mobilising metals is very important in environmental science due to the central position of the soil in the hydrological cycle and ecosystem. Concentrations of heavy metals in top soils, collected in green areas and public parks in metropolitan Naples area have been determined to provide information on specific emission sources. In addition to toxic metals, such as Pb, As, Cd, Cr and others, we have investigated the top soils as well for Pt group elements (PGEs), because since 1993 it is mandatory within EC for all new petrol driven motor vehicles to be equipped with Pt/Pd/Rh catalytic converter. In Italy this law has come into effect in 1998, but still is allowed to old vehicles use lead gasoline, though now the big majority of cars is equipped with Pt/Pd/Rh catalytic converters. Emission of abraded fragments of catalytic converters in vehicle exhausts will certainly determine environmental contamination with Pt group elements (PGEs), since many Pt complexes are highly cytotoxic and, in small dose, are strong allergens and potent sensitiser. The metropolitan area of Naples due to intense human activities and vehicles traffic is an interesting area to be monitored in order to check the pollution state of the soils. The geology of the area is prevalently represented by volcanics, erupted from the Upper Pleistocene to Recent by Mt. Somma-Vesuvius on the east and the Campi Flegrei fields on the west. To compile multi-element geochemical maps baseline we have sampled in situ and transported top soil for a total of 200 samples. The survey have been carried at about 200 sites covering an area of about 120 Km2, with a grid of 0.5 x 0.5 km in the highly urbanised area and 1 km x 1 km

Simulating neural systems with Xyce.

Energy Technology Data Exchange (ETDEWEB)

Schiek, Richard Louis; Thornquist, Heidi K.; Mei, Ting; Warrender, Christina E.; Aimone, James Bradley; Teeter, Corinne; Duda, Alex M.

2012-12-01

Sandias parallel circuit simulator, Xyce, can address large scale neuron simulations in a new way extending the range within which one can perform high-fidelity, multi-compartment neuron simulations. This report documents the implementation of neuron devices in Xyce, their use in simulation and analysis of neuron systems.

Xyce parallel electronic simulator reference guide, version 6.1

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R; Mei, Ting; Russo, Thomas V.; Schiek, Richard Louis; Sholander, Peter E.; Thornquist, Heidi K.; Verley, Jason C.; Baur, David Gregory

2014-03-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide [1] .

Xyce parallel electronic simulator reference guide, version 6.0.

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R; Mei, Ting; Russo, Thomas V.; Schiek, Richard Louis; Thornquist, Heidi K.; Verley, Jason C.; Fixel, Deborah A.; Coffey, Todd S; Pawlowski, Roger P; Warrender, Christina E.; Baur, David Gregory.

2013-08-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide [1] .

Strategies to take into account variations in extreme rainfall events for design storms in urban area: an example over Naples (Southern Italy)

Science.gov (United States)

Mercogliano, P.; Rianna, G.

2017-12-01

Eminent works highlighted how available observations display ongoing increases in extreme rainfall events while climate models assess them for future. Although the constraints in rainfall networks observations and uncertainties in climate modelling currently affect in significant way investigations, the huge impacts potentially induced by climate changes (CC) suggest adopting effective adaptation measures in order to take proper precautions. In this regard, design storms are used by engineers to size hydraulic infrastructures potentially affected by direct (e.g. pluvial/urban flooding) and indirect (e.g. river flooding) effects of extreme rainfall events. Usually they are expressed as IDF curves, mathematical relationships between rainfall Intensity, Duration, and the return period (frequency, F). They are estimated interpreting through Extreme Theories Statistical Theories (ETST) past rainfall records under the assumption of steady conditions resulting then unsuitable under climate change. In this work, a methodology to estimate future variations in IDF curves is presented and carried out for the city of Naples (Southern Italy). In this regard, the Equidistance Quantile Matching Approach proposed by Sivrastav et al. (2014) is adopted. According it, daily-subdaily maximum precipitation observations [a] and the analogous daily data provided by climate projections on current [b] and future time spans [c] are interpreted in IDF terms through Generalized Extreme Value (GEV) approach. After, quantile based mapping approach is used to establish a statistical relationship between cumulative distribution functions resulting by GEV of [a] and [b] (spatial downscaling) and [b] and [c] functions (temporal downscaling). Coupling so-obtained relations permits generating IDF curves under CC assumption. To account for uncertainties in future projections, all climate simulations available for the area in Euro-Cordex multimodel ensemble at 0.11° (about 12 km) are considered under

Influence of Wetting and Mass Transfer Properties of Organic Chemical Mixtures in Vadose Zone Materials on Groundwater Contamination by Nonaqueous Phase Liquids

Energy Technology Data Exchange (ETDEWEB)

Charles J Werth; Albert J Valocchi, Hongkyu Yoon

2011-05-21

Previous studies have found that organic acids, organic bases, and detergent-like chemicals change surface wettability. The wastewater and NAPL mixtures discharged at the Hanford site contain such chemicals, and their proportions likely change over time due to reaction-facilitated aging. The specific objectives of this work were to (1) determine the effect of organic chemical mixtures on surface wettability, (2) determine the effect of organic chemical mixtures on CCl4 volatilization rates from NAPL, and (3) accurately determine the migration, entrapment, and volatilization of organic chemical mixtures. Five tasks were proposed to achieve the project objectives. These are to (1) prepare representative batches of fresh and aged NAPL-wastewater mixtures, (2) to measure interfacial tension, contact angle, and capillary pressure-saturation profiles for the same mixtures, (3) to measure interphase mass transfer rates for the same mixtures using micromodels, (4) to measure multiphase flow and interphase mass transfer in large flow cell experiments, all using the same mixtures, and (5) to modify the multiphase flow simulator STOMP in order to account for updated P-S and interphase mass transfer relationships, and to simulate the impact of CCl4 in the vadose zone on groundwater contamination. Results and findings from these tasks and summarized in the attached final report.

Commercial nonindustrial production of pastries and ice cream in Naples, Italy: results from the inspection of 34 food businesses during a 2-year surveillance study

Directory of Open Access Journals (Sweden)

Lucia Tanucci Nannini

2010-03-01

Full Text Available

Background: Ice cream and cream-based pastries are an excellent media for the growth of pathogenic microorganisms. Foods that are prepared without due respect to the rules of food hygiene can carry microorganisms and/or toxins and could be responsible of toxinfections. The main objective of this study was to obtain an overall picture of the hygiene/sanitation conditions found in businesses that produce hand-made pastries and/or ice cream in Naples, Italy.

Methods: We inspected 34 businesses to assess the following aspects: hygiene/sanitation conditions of the work area and equipment, implementation of good food hygiene principles, evaluation of HACCP plans, licensing/authorization, quality control and sampling protocols, as well as systems for ensuring food traceability. In 28 of the businesses, samples (environment, foods, workers were collected for microbiological analysis.

Results: Sanctions were issued for nonconformities in 8 businesses (23.5%, and 25 businesses (73.5% received warnings with orders to correct minor nonconformities (inadequate documentation of compliance with current regulations, incorrect implementation of the quality-control protocol within specified time periods. Microbiological analyses revealed irregularities in 24/28 businesses (85.7%, and 138 of the 280 samples collected displayed contamination levels exceeding the limits adopted for this study (49.3%. In particular, 80% of the surfaces sampled and 23.8% of the hand swabs collected were shown to be contaminated. All food samples collected met the process-hygiene and food-safety standards prescribed by the European Community. Results obtained were statistically significant (p < 0.05.

Conclusions: Our experience of food safety surveillance system indicates that Neapolitan food business operators involved in the production of hand-made ice cream or pastries do not

Simulator configuration maintenance

International Nuclear Information System (INIS)

2006-01-01

Requirements and recommendations of this section defines NPP personnel activity aimed to the provision of the simulator configuration compliance with the current configuration of the power-generating unit-prototype, standard and technical requirements and describe a monitoring procedure for a set of simulator software and hardware, training, organizational and technical documents

Boveri's research at the Zoological Station Naples: Rediscovery of his original microscope slides at the University of Würzburg.

Science.gov (United States)

Scheer, Ulrich

2018-02-14

Eric Davidson once wrote about Theodor Boveri: "From his own researches, and perhaps most important, his generalized interpretations, derive the paradigms that underlie modern inquiries into the genomic basis of embryogenesis" (Davidson, 1985). As luck would have it, the "primary data" of Boveri's experimental work, namely the microscope slides prepared by him and his wife Marcella during several stays at the Zoological Station in Naples (1901/02, 1911/12 and 1914), have survived at the University of Würzburg. More than 600 slides exist and despite their age they are in a surprisingly good condition. The slides are labelled and dated in Boveri's handwriting and thus can be assigned to his published experimental work on sea urchin development. The results allowed Boveri to unravel the role of the cell nucleus and its chromosomes in development and inheritance. Here, I present an overview of the slides in the context of Boveri's work along with photographic images of selected specimens taken from the original slides. It is planned to examine the slides in more detail, take high-resolution focal image series of significant specimens and make them online available. Copyright © 2018 The Author. Published by Elsevier B.V. All rights reserved.

Evaluation of Trace Elements in Potatoes (Solanum tuberosum) from a Suburban Area of Naples, Italy: The "Triangle of Death".

Science.gov (United States)

Roma, Antonella De; Abete, Maria Cesarina; Brizio, Paola; Picazio, Giuseppe; Caiazzo, Marcello; D'auria, Jacopo Luigi; Esposito, Mauro

2017-07-01

Human exposure to contaminated food is a general health concern worldwide; it is necessary to evaluate food safety with respect to contaminants present in the edible parts of major food crops. This study evaluated the concentrations of 17 trace elements (As, Be, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Sb, Se, Sn, Tl, V, and Zn) from 51 potato plantations in the Campania region, inside the area known as the "Triangle of Death," with inductively coupled plasma mass spectrometry analysis. Results confirm that the potatoes collected from the suburban area of Naples contained concentrations of trace elements below the safe limits prescribed by the Food and Agriculture Organization of the United Nations and the World Health Organization. The concentrations of elements were similar to those reported for potatoes grown in other countries. Monitoring the content of toxic and potentially toxic elements is one of the most important aspects of food quality assurance. The environmental persistence of metals may result in the accumulation of significant levels of these contaminants in plants. They are absorbed to different extents, depending on their source, soil and climatic factors, plant genotype, and agrotechnical conditions, thereby entering the food chain and representing a risk to human health.

Earth System Documentation (ES-DOC) Preparation for CMIP6

Science.gov (United States)

Denvil, S.; Murphy, S.; Greenslade, M. A.; Lawrence, B.; Guilyardi, E.; Pascoe, C.; Treshanksy, A.; Elkington, M.; Hibling, E.; Hassell, D.

2015-12-01

During the course of 2015 the Earth System Documentation (ES-DOC) project began its preparations for CMIP6 (Coupled Model Inter-comparison Project 6) by further extending the ES-DOC tooling ecosystem in support of Earth System Model (ESM) documentation creation, search, viewing & comparison. The ES-DOC online questionnaire, the ES-DOC desktop notebook, and the ES-DOC python toolkit will serve as multiple complementary pathways to generating CMIP6 documentation. It is envisaged that institutes will leverage these tools at different points of the CMIP6 lifecycle. Institutes will be particularly interested to know that the documentation burden will be either streamlined or completely automated.As all the tools are tightly integrated with the ES-DOC web-service, institutes can be confident that the latency between documentation creation & publishing will be reduced to a minimum. Published documents will be viewable with the online ES-DOC Viewer (accessible via citable URL's). Model inter-comparison scenarios will be supported using the ES-DOC online Comparator tool. The Comparator is being extended to:• Support comparison of both Model descriptions & Simulation runs;• Greatly streamline the effort involved in compiling official tables.The entire ES-DOC ecosystem is open source and built upon open standards such as the Common Information Model (CIM) (versions 1 and 2).

PCISIM - A Simulation Tool for PCI Bus Based Systems

DEFF Research Database (Denmark)

Sharp, Robin

1999-01-01

This document describes a PCI bus simulator for use in evaluating the feasibility of system designs based on this bus.......This document describes a PCI bus simulator for use in evaluating the feasibility of system designs based on this bus....

Dissolution and biodegradation of a mixture of immiscible liquids

International Nuclear Information System (INIS)

Gandhi, P.; Erickson, L.E.; Fan, L.T.

1994-01-01

Subsurface contaminants are frequently encountered as mixtures of nonaqueous phase liquids (NAPLs) at sites contaminated by gasoline or coal tar comprising organic mixtures. The leaching of these organic mixtures from the aquifer has been examined with and without biodegradation. The results obtained have been compared with the limiting case of a single component NAPL. Various physical processes involved have been quantified based on the assumptions that liquid-liquid and sorption equilibria are established at the beginning of each flushing; oxygen required for biochemical oxidation is completely consumed by the end of each flushing; and the rate of biochemical oxidation obeys the Monod kinetics for a multi-substrate system, characterized by an oxygen utilization factor. This has given rise to an equilibrium model expressing the mass fraction of any component remaining in the aquifer, its aqueous concentration, and the composition of the NAPL as functions of the number of flushings. The results of the simulation with the model demonstrate that bioremediation can significantly reduce the time necessary for removing the components of intermediate solubility such as xylene. Highly soluble components of the NAPL are mainly removed by the pump-and-treat mechanism while the components of extremely low solubility are unavailable to the microbes as substrates in a multi-component system

Simulator fidelity and training effectiveness: a comprehensive bibliography with selected annotations

International Nuclear Information System (INIS)

Rankin, W.L.; Bolton, P.A.; Shikiar, R.; Saari, L.M.

1984-05-01

This document contains a comprehensive bibliography on the topic of simulator fidelity and training effectiveness, prepared during the preliminary phases of work on an NRC-sponsored project on the Role of Nuclear Power Plant Simulators in Operator Licensing and Training. Section A of the document is an annotated bibliography consisting of articles and reports with relevance to the psychological aspects of simulator fidelity and the effectiveness of training simulators in a variety of settings, including military. The annotated items are drawn from a more comprehensive bibliography, presented in Section B, listing documents treating the role of simulators in operator training both in the nuclear industry and elsewhere

Jet A fuel recovery using micellar flooding: Design and implementation.

Science.gov (United States)

Kostarelos, Konstantinos; Lenschow, Søren R; Stylianou, Marinos A; de Blanc, Phillip C; Mygind, Mette Marie; Christensen, Anders G

2016-09-01

Surfactants offer two mechanisms for recovering NAPLs: 1) to mobilize NAPL by reducing NAPL/water interfacial tension, and; 2) to increase the NAPL's aqueous solubility-called solubilization-as an enhancement to pump & treat. The second approach has been well-studied and applied successfully in several pilot-scale and a few full-scale tests within the last 15years, known as Surfactant Enhanced Aquifer Remediation (SEAR). A useful source of information for this second approach is the "Surfactant-enhanced aquifer remediation (SEAR) design manual" from the U.S. Navy Facilities Engineering Command. Few attempts, however, have been made at recovering NAPLs using the mobilization approach presented in this paper. Now, a full-scale field implementation of the mobilization approach is planned to recover an LNAPL (Jet A fuel) from a surficial sand aquifer located in Denmark using a smaller amount of surfactant solution and fewer PVs of throughput compared with the SEAR approach. The approach will rely on mobilizing the LNAPL so that it is recovered ahead of the surfactant microemulsion, also known as a micellar flood. This paper will review the laboratory work performed as part of the design for a full-scale implementation of a micellar flood. Completed lab work includes screening of surfactants, phase behavior and detailed salinity scans of the most promising formulations, and generating a ternary diagram to be used for the numerical simulations of the field application. The site owners and regulators were able to make crucial decisions such as the anticipated field results based on this work. Copyright © 2016 Elsevier B.V. All rights reserved.

Xyce parallel electronic simulator reference guide, Version 6.0.1.

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R; Mei, Ting; Russo, Thomas V.; Schiek, Richard Louis; Thornquist, Heidi K.; Verley, Jason C.; Fixel, Deborah A.; Coffey, Todd S; Pawlowski, Roger P; Warrender, Christina E.; Baur, David Gregory.

2014-01-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide [1] .

Xyce™ Parallel Electronic Simulator Reference Guide, Version 6.5

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical Models and Simulation; Aadithya, Karthik V. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical Models and Simulation; Mei, Ting [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical Models and Simulation; Russo, Thomas V. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical Models and Simulation; Schiek, Richard L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical Models and Simulation; Sholander, Peter E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical Models and Simulation; Thornquist, Heidi K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical Models and Simulation; Verley, Jason C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electrical Models and Simulation

2016-06-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users’ Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users’ Guide. The information herein is subject to change without notice. Copyright © 2002-2016 Sandia Corporation. All rights reserved.

Adsorption and desorption of contaminants

International Nuclear Information System (INIS)

Palumbo, A.V.; Strong-Gunderson, J.M.; DeFlaun, M.; Ensley, B.

1994-01-01

The microbial remediation of sites Contaminated with organics is well documented, however, there are some significant problems that remain to be solved in the areas of contaminants sorbed to soils and non-aqueous phase liquid (NAPL) contamination. Methods of in situ bioremediation techniques employ either the stimulation of indigenous populations by nutrient addition, or the addition of prepared bacterial cultures to the subsurface environment. Problems of contaminant sorption and NAPL's are related in that both encompass reduced contaminant bioavailability. Non-aqueous phase liquids have been identified as a priority area for research in the In situ Program due to their presence at DOE sites and the lack of adequate technology to effectively treat this contamination. Bioremediation technologies developed as a result of this project are easily transferred to industry

Dose mapping for documentation of radiation sterilization

DEFF Research Database (Denmark)

Miller, A.

1999-01-01

The radiation sterilization standards EN 552 and ISO 11137 require that dose mapping in real or simulated product be carried in connection with the process qualification. This paper reviews the recommendations given in the standards and discusses the difficulties and limitations of practical dose...... mapping. The paper further gives recommendations for effective dose mapping including traceable dosimetry, documented procedures for placement of dosimeters, and evaluation of measurement uncertainties. (C) 1999 Elsevier Science Ltd. All rights reserved....

Stochastic airspace simulation tool development

Science.gov (United States)

2009-10-01

Modeling and simulation is often used to study : the physical world when observation may not be : practical. The overall goal of a recent and ongoing : simulation tool project has been to provide a : documented, lifecycle-managed, multi-processor : c...

Documentation of the dynamic parameter, water-use, stream and lake flow routing, and two summary output modules and updates to surface-depression storage simulation and initial conditions specification options with the Precipitation-Runoff Modeling System (PRMS)

Science.gov (United States)

Regan, R. Steve; LaFontaine, Jacob H.

2017-10-05

This report documents seven enhancements to the U.S. Geological Survey (USGS) Precipitation-Runoff Modeling System (PRMS) hydrologic simulation code: two time-series input options, two new output options, and three updates of existing capabilities. The enhancements are (1) new dynamic parameter module, (2) new water-use module, (3) new Hydrologic Response Unit (HRU) summary output module, (4) new basin variables summary output module, (5) new stream and lake flow routing module, (6) update to surface-depression storage and flow simulation, and (7) update to the initial-conditions specification. This report relies heavily upon U.S. Geological Survey Techniques and Methods, book 6, chapter B7, which documents PRMS version 4 (PRMS-IV). A brief description of PRMS is included in this report.

Sulphur, nitrogen and carbon content of Sphagnum capillifolium and Pseudevernia furfuracea exposed in bags in the Naples urban area

International Nuclear Information System (INIS)

Vingiani, S.; Adamo, P.; Giordano, S.

2004-01-01

The accumulation ability of the major elements sulphur, nitrogen and carbon by the moss Sphagnum capillifolium (Ehrh.) Hedw. and the lichen Pseudevernia furfuracea (L.) Zopf exposed in bags in Naples urban area,was investigated. Bags were exposed at the beginning of July 1999 and gathered in two subsequent moments: at the end of the dry season (after 10 weeks of exposure) and during the wet season (after 17 weeks of exposure), to include the effects of rainy conditions. Sulphur and N content of the lichen increased all over the exposure period, while the level of C did not change significantly either after 10 or 17 weeks of exposition. For the moss the S accumulation was limited to the dry period of exposure, whereas N and C content decreased with exposure. Results, in contrast with those obtained in a previous study on trace elements bioaccumulation [Adamo et al., Environmental Pollution, (2003) 122, 91-103], suggest that accumulation of gaseous pollutants is strongly influenced by biomonitor vitality and that lichen bags are a more reliable and effective tool for monitoring S, N and C atmospheric depositions in urban areas compared to moss bags, because of greater lichen resistance to dry and stressing conditions of urban environment. - The lichen Pseudevernia furfuracea is more effective than the moss Sphagnum capillifolium as S and N pollutants biomonitor

Semantic Document Library: A Virtual Research Environment for Documents, Data and Workflows Sharing

Science.gov (United States)

Kotwani, K.; Liu, Y.; Myers, J.; Futrelle, J.

2008-12-01

The Semantic Document Library (SDL) was driven by use cases from the environmental observatory communities and is designed to provide conventional document repository features of uploading, downloading, editing and versioning of documents as well as value adding features of tagging, querying, sharing, annotating, ranking, provenance, social networking and geo-spatial mapping services. It allows users to organize a catalogue of watershed observation data, model output, workflows, as well publications and documents related to the same watershed study through the tagging capability. Users can tag all relevant materials using the same watershed name and find all of them easily later using this tag. The underpinning semantic content repository can store materials from other cyberenvironments such as workflow or simulation tools and SDL provides an effective interface to query and organize materials from various sources. Advanced features of the SDL allow users to visualize the provenance of the materials such as the source and how the output data is derived. Other novel features include visualizing all geo-referenced materials on a geospatial map. SDL as a component of a cyberenvironment portal (the NCSA Cybercollaboratory) has goal of efficient management of information and relationships between published artifacts (Validated models, vetted data, workflows, annotations, best practices, reviews and papers) produced from raw research artifacts (data, notes, plans etc.) through agents (people, sensors etc.). Tremendous scientific potential of artifacts is achieved through mechanisms of sharing, reuse and collaboration - empowering scientists to spread their knowledge and protocols and to benefit from the knowledge of others. SDL successfully implements web 2.0 technologies and design patterns along with semantic content management approach that enables use of multiple ontologies and dynamic evolution (e.g. folksonomies) of terminology. Scientific documents involved with

Xyce parallel electronic simulator design.

Energy Technology Data Exchange (ETDEWEB)

Thornquist, Heidi K.; Rankin, Eric Lamont; Mei, Ting; Schiek, Richard Louis; Keiter, Eric Richard; Russo, Thomas V.

2010-09-01

This document is the Xyce Circuit Simulator developer guide. Xyce has been designed from the 'ground up' to be a SPICE-compatible, distributed memory parallel circuit simulator. While it is in many respects a research code, Xyce is intended to be a production simulator. As such, having software quality engineering (SQE) procedures in place to insure a high level of code quality and robustness are essential. Version control, issue tracking customer support, C++ style guildlines and the Xyce release process are all described. The Xyce Parallel Electronic Simulator has been under development at Sandia since 1999. Historically, Xyce has mostly been funded by ASC, the original focus of Xyce development has primarily been related to circuits for nuclear weapons. However, this has not been the only focus and it is expected that the project will diversify. Like many ASC projects, Xyce is a group development effort, which involves a number of researchers, engineers, scientists, mathmaticians and computer scientists. In addition to diversity of background, it is to be expected on long term projects for there to be a certain amount of staff turnover, as people move on to different projects. As a result, it is very important that the project maintain high software quality standards. The point of this document is to formally document a number of the software quality practices followed by the Xyce team in one place. Also, it is hoped that this document will be a good source of information for new developers.

Computerising documentation

International Nuclear Information System (INIS)

Anon.

1992-01-01

The nuclear power generation industry is faced with public concern and government pressures over safety, efficiency and risk. Operators throughout the industry are addressing these issues with the aid of a new technology - technical document management systems (TDMS). Used for strategic and tactical advantage, the systems enable users to scan, archive, retrieve, store, edit, distribute worldwide and manage the huge volume of documentation (paper drawings, CAD data and film-based information) generated in building, maintaining and ensuring safety in the UK's power plants. The power generation industry has recognized that the management and modification of operation critical information is vital to the safety and efficiency of its power plants. Regulatory pressure from the Nuclear Installations Inspectorate (NII) to operate within strict safety margins or lose Site Licences has prompted the need for accurate, up-to-data documentation. A document capture and management retrieval system provides a powerful cost-effective solution, giving rapid access to documentation in a tightly controlled environment. The computerisation of documents and plans is discussed in this article. (Author)

Simulant Basis for the Standard High Solids Vessel Design

Energy Technology Data Exchange (ETDEWEB)

Peterson, Reid A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fiskum, Sandra K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Suffield, Sarah R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Daniel, Richard C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gauglitz, Phillip A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wells, Beric E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2017-09-30

The Waste Treatment and Immobilization Plant (WTP) is working to develop a Standard High Solids Vessel Design (SHSVD) process vessel. To support testing of this new design, WTP engineering staff requested that a Newtonian simulant and a non-Newtonian simulant be developed that would represent the Most Adverse Design Conditions (in development) with respect to mixing performance as specified by WTP. The majority of the simulant requirements are specified in 24590-PTF-RPT-PE-16-001, Rev. 0. The first step in this process is to develop the basis for these simulants. This document describes the basis for the properties of these two simulant types. The simulant recipes that meet this basis will be provided in a subsequent document.

Documentation of TRU biological transport model (BIOTRAN)

Energy Technology Data Exchange (ETDEWEB)

Gallegos, A.F.; Garcia, B.J.; Sutton, C.M.

1980-01-01

Inclusive of Appendices, this document describes the purpose, rationale, construction, and operation of a biological transport model (BIOTRAN). This model is used to predict the flow of transuranic elements (TRU) through specified plant and animal environments using biomass as a vector. The appendices are: (A) Flows of moisture, biomass, and TRU; (B) Intermediate variables affecting flows; (C) Mnemonic equivalents (code) for variables; (D) Variable library (code); (E) BIOTRAN code (Fortran); (F) Plants simulated; (G) BIOTRAN code documentation; (H) Operating instructions for BIOTRAN code. The main text is presented with a specific format which uses a minimum of space, yet is adequate for tracking most relationships from their first appearance to their formulation in the code. Because relationships are treated individually in this manner, and rely heavily on Appendix material for understanding, it is advised that the reader familiarize himself with these materials before proceeding with the main text.

Documentation of TRU biological transport model (BIOTRAN)

International Nuclear Information System (INIS)

Gallegos, A.F.; Garcia, B.J.; Sutton, C.M.

1980-01-01

Inclusive of Appendices, this document describes the purpose, rationale, construction, and operation of a biological transport model (BIOTRAN). This model is used to predict the flow of transuranic elements (TRU) through specified plant and animal environments using biomass as a vector. The appendices are: (A) Flows of moisture, biomass, and TRU; (B) Intermediate variables affecting flows; (C) Mnemonic equivalents (code) for variables; (D) Variable library (code); (E) BIOTRAN code (Fortran); (F) Plants simulated; (G) BIOTRAN code documentation; (H) Operating instructions for BIOTRAN code. The main text is presented with a specific format which uses a minimum of space, yet is adequate for tracking most relationships from their first appearance to their formulation in the code. Because relationships are treated individually in this manner, and rely heavily on Appendix material for understanding, it is advised that the reader familiarize himself with these materials before proceeding with the main text

Monte Carlo Simulation Tool Installation and Operation Guide

Energy Technology Data Exchange (ETDEWEB)

Aguayo Navarrete, Estanislao; Ankney, Austin S.; Berguson, Timothy J.; Kouzes, Richard T.; Orrell, John L.; Troy, Meredith D.; Wiseman, Clinton G.

2013-09-02

This document provides information on software and procedures for Monte Carlo simulations based on the Geant4 toolkit, the ROOT data analysis software and the CRY cosmic ray library. These tools have been chosen for its application to shield design and activation studies as part of the simulation task for the Majorana Collaboration. This document includes instructions for installation, operation and modification of the simulation code in a high cyber-security computing environment, such as the Pacific Northwest National Laboratory network. It is intended as a living document, and will be periodically updated. It is a starting point for information collection by an experimenter, and is not the definitive source. Users should consult with one of the authors for guidance on how to find the most current information for their needs.

Dynamically downscaled climate simulations over North America: Methods, evaluation, and supporting documentation for users

Science.gov (United States)

Hostetler, S.W.; Alder, J.R.; Allan, A.M.

2011-01-01

We have completed an array of high-resolution simulations of present and future climate over Western North America (WNA) and Eastern North America (ENA) by dynamically downscaling global climate simulations using a regional climate model, RegCM3. The simulations are intended to provide long time series of internally consistent surface and atmospheric variables for use in climate-related research. In addition to providing high-resolution weather and climate data for the past, present, and future, we have developed an integrated data flow and methodology for processing, summarizing, viewing, and delivering the climate datasets to a wide range of potential users. Our simulations were run over 50- and 15-kilometer model grids in an attempt to capture more of the climatic detail associated with processes such as topographic forcing than can be captured by general circulation models (GCMs). The simulations were run using output from four GCMs. All simulations span the present (for example, 1968-1999), common periods of the future (2040-2069), and two simulations continuously cover 2010-2099. The trace gas concentrations in our simulations were the same as those of the GCMs: the IPCC 20th century time series for 1968-1999 and the A2 time series for simulations of the future. We demonstrate that RegCM3 is capable of producing present day annual and seasonal climatologies of air temperature and precipitation that are in good agreement with observations. Important features of the high-resolution climatology of temperature, precipitation, snow water equivalent (SWE), and soil moisture are consistently reproduced in all model runs over WNA and ENA. The simulations provide a potential range of future climate change for selected decades and display common patterns of the direction and magnitude of changes. As expected, there are some model to model differences that limit interpretability and give rise to uncertainties. Here, we provide background information about the GCMs and

Ecodriver. D23.2: Simulation and analysis document for on-line vehicle algorithms

NARCIS (Netherlands)

Seewald, P.; Orfila, O.; Saintpierre, G.

2014-01-01

This deliverable reports on the simulations and analysis of the on-line vehicle algorithms as well as the ecoDriver Android application. The simulation and field test results give an impression of how the algorithms will perform in the real world trials in SP3. Thus, it is possible to apply

Documentation Service

International Nuclear Information System (INIS)

Charnay, J.; Chosson, L.; Croize, M.; Ducloux, A.; Flores, S.; Jarroux, D.; Melka, J.; Morgue, D.; Mottin, C.

1998-01-01

This service assures the treatment and diffusion of the scientific information and the management of the scientific production of the institute as well as the secretariat operation for the groups and services of the institute. The report on documentation-library section mentions: the management of the documentation funds, search in international databases (INIS, Current Contents, Inspects), Pret-Inter service which allows accessing documents through DEMOCRITE network of IN2P3. As realizations also mentioned are: the setup of a video, photo database, the Web home page of the institute's library, follow-up of digitizing the document funds by integrating the CD-ROMs and diskettes, electronic archiving of the scientific production, etc

Surfactant-enhanced solubilization of residual dodecane in soil columns. 2. Mathematical modeling

International Nuclear Information System (INIS)

Abriola, L.M.; Dekker, T.J.; Pennell, K.D.

1993-01-01

A mathematical model is developed to describe surfactant-enhanced solubilization of nonaqueous-phase liquids (NAPLs) in porous media. The model incorporates aqueous-phase transport equations for organic and surfactant components as well as a mass balance for the organic phase. Rate-limited solubilization and surfactant sorption are represented by a linear driving force expression and a Langmuir isotherm, respectively. The model is implemented in a one-dimensional Galerkin finite element simulator which idealizes the entrapped residual organic as a collection of spherical globules. Soil column data for the solubilization of residual dodecane by an aqueous solution of polyoxyethylene (20) sorbitan monooleate are used to evaluate the conceptual model. Input parameters were obtained, where possible, from independent batch experiments. Calibrated model simulations exhibit good agreement with measured effluent concentrations, supporting the utility of the conceptual modeling approach. Sensitivity analyses explore the influence of surfactant concentration and flushing strategy on NAPL recovery. 45 refs., 6 figs., 3 tabs

Cultural diversity: blind spot in medical curriculum documents, a document analysis.

Science.gov (United States)

Paternotte, Emma; Fokkema, Joanne P I; van Loon, Karsten A; van Dulmen, Sandra; Scheele, Fedde

2014-08-22

Cultural diversity among patients presents specific challenges to physicians. Therefore, cultural diversity training is needed in medical education. In cases where strategic curriculum documents form the basis of medical training it is expected that the topic of cultural diversity is included in these documents, especially if these have been recently updated. The aim of this study was to assess the current formal status of cultural diversity training in the Netherlands, which is a multi-ethnic country with recently updated medical curriculum documents. In February and March 2013, a document analysis was performed of strategic curriculum documents for undergraduate and postgraduate medical education in the Netherlands. All text phrases that referred to cultural diversity were extracted from these documents. Subsequently, these phrases were sorted into objectives, training methods or evaluation tools to assess how they contributed to adequate curriculum design. Of a total of 52 documents, 33 documents contained phrases with information about cultural diversity training. Cultural diversity aspects were more prominently described in the curriculum documents for undergraduate education than in those for postgraduate education. The most specific information about cultural diversity was found in the blueprint for undergraduate medical education. In the postgraduate curriculum documents, attention to cultural diversity differed among specialties and was mainly superficial. Cultural diversity is an underrepresented topic in the Dutch documents that form the basis for actual medical training, although the documents have been updated recently. Attention to the topic is thus unwarranted. This situation does not fit the demand of a multi-ethnic society for doctors with cultural diversity competences. Multi-ethnic countries should be critical on the content of the bases for their medical educational curricula.

Trace element accumulation by moss and lichen exposed in bags in the city of Naples (Italy)

International Nuclear Information System (INIS)

Adamo, P.; Giordano, S.; Vingiani, S.; Castaldo Cobianchi, R.; Violante, P.

2003-01-01

Trace element accumulation by lichen in bags is more affected by meteorological conditions compared with moss. - This paper presents the results of a bioaccumulation study of trace elements in the Naples urban area based on the use of the moss Sphagnum capillifolium (Ehrh.) Hedw. and the lichen Pseudevernia furfuracea (L.) Zopf exposed in bags in 23 sites. Moss and lichen bags were exposed for 4 months starting from the beginning of July 1999. Bags gathering was carried out after 10 weeks of exposure, at the end of the dry season, and after 17 weeks, during the wet season. The elements Al, As, Ca, Cd, Cr, Co, Cu, Fe, K, Mg, Mn, Mo, Ni, Pb, Ti, V and Zn were analysed by inductively coupled plasma-mass spectrometry ICP-MS in both biomonitors. For the majority of the elements the total amounts found in S. capillifolium were higher than in P. furfuracea whether considering the whole period of exposure or the weekly uptake. It was observed that there was a much greater difference in metal accumulation by P. furfuracea between the dry and wet seasons compared with S. capillifolium. In the wet period, the lichen seems to accumulate a larger quantity of metals. With the exception of Mn, trace element concentrations did not appear to be significantly affected by the washing away of rainfall. K loss during exposure suggested cell membrane damage in both organisms. For P. furfuracea the K leakage was limited to the dry period of exposure. A clear distinction between 'lithophilic' and 'anthropogenic' elements was achieved by cluster analysis. Significant correlations were found among Fe-Cu-Cr-Ni, Pb-Cd-Co, V-Cr-Ni, Zn-Ni-Pb, suggesting a common source for each group of elements

The Naples High- and Low-Excitability rats: selective breeding, behavioral profile, morphometry, and molecular biology of the mesocortical dopamine system.

Science.gov (United States)

Viggiano, Davide; Vallone, Daniela; Welzl, Hans; Sadile, Adolfo G

2002-09-01

The Naples High- (NHE) and Low-Excitability (NLE) rat lines have been selected since 1976 on the basis of behavioral arousal to novelty (Làt-maze). Selective breeding has been conducted under continuous genetic pressure, with no brother-sister mating. The behavioral analyses presented here deal with (1) activity in environments of different complexity, i.e., holeboard and Làt maze; (2) maze learning in hexagonal tunnel, Olton, and Morris water mazes and; (3) two-way active avoidance and conditioned taste aversion tests. Morphometric analyses deal with central dopaminergic systems at their origin and target sites, as well as the density of dopamine transporter immunoreactivity. Molecular biology analyses are also presented, dealing with recent experiments on the prefrontal cortex (PFc), cloning and identifying differentially expressed genes using subtractive libraries and RNAase protection. The divergence between NLE and NHE rats varies as a function of the complexity level of the environment, with an impaired working and reference memory in both lines compared to random bred (NRB) controls. Moreover, data from the PFc of NHE rats show a hyperdopaminergic innervation, with overexpression of mRNA species involved in basal metabolism, and down-regulation of dopamine D1 receptors. Altogether, the evidence gathered so far supports a hyperfunctioning mesocorticolimbic system that makes NHE rats a useful tool for the study of hyperactivity and attention deficit, learning and memory disabilities, and drug abuse.

Subject (of documents)

DEFF Research Database (Denmark)

Hjørland, Birger

2017-01-01

This article presents and discuss the concept “subject” or subject matter (of documents) as it has been examined in library and information science (LIS) for more than 100 years. Different theoretical positions are outlined and it is found that the most important distinction is between document......-oriented views versus request-oriented views. The document-oriented view conceive subject as something inherent in documents, whereas the request-oriented view (or the policy based view) understand subject as an attribution made to documents in order to facilitate certain uses of them. Related concepts...

Simulation language of DSNP: dynamic simulator for nuclear power-plants

International Nuclear Information System (INIS)

Saphier, D.

1978-09-01

The Dynamic Simulator for Nuclear Power-plants (DSNP) is a system of programs and data sets by which a nuclear power plant or part thereof can be simulated at different levels of sophistication. The acronym DSNP is used interchangeably for the DSNP language, for the DSNP precompiler, for the DSNP libraries, and for the DSNP document generator. The DSNP language is a set of simple block oriented statements, which together with the appropriate data, comprise a simulation of a nuclear power plant. The majority of the DSNP statements will result in the inclusion of a simulated physical module into the program. FORTRAN statements can be inserted with no restrictions among DSNP statements

Evaluation of User Satisfaction in Public Residential Housing - A Case Study in the Outskirts of Naples, Italy

Science.gov (United States)

Forte, Fabiana; Russo, Yvonne

2017-10-01

Nowadays the quality of homes and social life are two closely interacting categories which require a more careful interpretation of the users’ needs. Their opinions, expectations and “desires” have to be incorporated into both the design and evaluation processes. With specific reference to the experiences of public housing, the practice of “user satisfaction” should be increasingly incorporated during the ex-post (or monitoring) evaluation in order to verify the quality and validity of the service offered, thus activating a real co-participation of the user in the creation and improvement of the housing service. It is well-known that the principle of customer satisfaction derives from the field of marketing as a tool to evaluate how and how much the products/services offered meet the needs of the consumers. In the field of the construction industry, customer satisfaction has been incorporated into the “Post-Occupation Evaluation”, an evaluation tool of the performance of the building “in use” through the combination of objective and subjective variables expressed by the occupiers. Widely used since the 1970s in Anglo-Saxon countries, Italy is still struggling to find a systematic implementation. In this perspective, the article presents an application of the customer satisfaction method for the identification of some interventions aimed at improving the quality of a complex of public residential housing localized in Ponticelli, the second most populated district in the outskirts of the metropolitan city of Naples, in the Campania Region (Italy). Following a synthetic introduction of the theme and the explanation of the object of evaluation, the article discusses the methodology and the results, focalizing on some intervention hypotheses verified in terms of economic sustainability.

Reactive documentation system

Science.gov (United States)

Boehnlein, Thomas R.; Kramb, Victoria

2018-04-01

Proper formal documentation of computer acquired NDE experimental data generated during research is critical to the longevity and usefulness of the data. Without documentation describing how and why the data was acquired, NDE research teams lose capability such as their ability to generate new information from previously collected data or provide adequate information so that their work can be replicated by others seeking to validate their research. Despite the critical nature of this issue, NDE data is still being generated in research labs without appropriate documentation. By generating documentation in series with data, equal priority is given to both activities during the research process. One way to achieve this is to use a reactive documentation system (RDS). RDS prompts an operator to document the data as it is generated rather than relying on the operator to decide when and what to document. This paper discusses how such a system can be implemented in a dynamic environment made up of in-house and third party NDE data acquisition systems without creating additional burden on the operator. The reactive documentation approach presented here is agnostic enough that the principles can be applied to any operator controlled, computer based, data acquisition system.

Sandfly-Borne Phlebovirus Isolations from Turkey: New Insight into the Sandfly fever Sicilian and Sandfly fever Naples Species.

Directory of Open Access Journals (Sweden)

Cigdem Alkan

2016-03-01

Full Text Available Many studies have presented virus sequences which suggest the existence of a variety of putative new phleboviruses transmitted by sandflies in the Old World. However, in most of these studies, only partial sequences in the polymerase or the nucleoprotein genes were characterised. Therefore to further our understand of the presence and potential medical importance of sandfly-borne phleboviruses that circulate in southern Anatolia, we initiated field campaigns in 2012 and 2013 designed to identify, isolate and characterise phleboviruses in sandflies in this region.An entomological investigation encompassing 8 villages in Adana, Mediterranean Turkey was performed in August and September 2012 and 2013. A total of 11,302 sandflies were collected and grouped into 797 pools which were tested for the presence of phleboviruses using specific primers for RT-PCR analysis and also cell culture methods for virus isolation. Seven pools were PCR positive, and viruses were isolated from three pools of sandflies, resulting in the identification of two new viruses that we named Zerdali virus and Toros virus. Phylogenetic analysis based on full-length genomic sequence showed that Zerdali virus was most closely related with Tehran virus (and belongs to the Sandfly fever Naples species, whereas Toros virus was closest to Corfou virus.The results indicate that a variety of phleboviruses are co-circulating in this region of southern Anatolia. Based on our studies, these new viruses clearly belong to genetic groups that include several human pathogens. However, whether or not Toros and Zerdali viruses can infect humans and cause diseases such as sandfly fever remains to be investigated.

Starlink Document Styles

Science.gov (United States)

Lawden, M. D.

This document describes the various styles which are recommended for Starlink documents. It also explains how to use the templates which are provided by Starlink to help authors create documents in a standard style. This paper is concerned mainly with conveying the ``look and feel" of the various styles of Starlink document rather than describing the technical details of how to produce them. Other Starlink papers give recommendations for the detailed aspects of document production, design, layout, and typography. The only style that is likely to be used by most Starlink authors is the Standard style.

Document understanding for a broad class of documents

NARCIS (Netherlands)

Aiello, Marco; Monz, Christof; Todoran, Leon; Worring, Marcel

2002-01-01

We present a document analysis system able to assign logical labels and extract the reading order in a broad set of documents. All information sources, from geometric features and spatial relations to the textual features and content are employed in the analysis. To deal effectively with these

Large Scale Document Inversion using a Multi-threaded Computing System.

Science.gov (United States)

Jung, Sungbo; Chang, Dar-Jen; Park, Juw Won

2017-06-01

Current microprocessor architecture is moving towards multi-core/multi-threaded systems. This trend has led to a surge of interest in using multi-threaded computing devices, such as the Graphics Processing Unit (GPU), for general purpose computing. We can utilize the GPU in computation as a massive parallel coprocessor because the GPU consists of multiple cores. The GPU is also an affordable, attractive, and user-programmable commodity. Nowadays a lot of information has been flooded into the digital domain around the world. Huge volume of data, such as digital libraries, social networking services, e-commerce product data, and reviews, etc., is produced or collected every moment with dramatic growth in size. Although the inverted index is a useful data structure that can be used for full text searches or document retrieval, a large number of documents will require a tremendous amount of time to create the index. The performance of document inversion can be improved by multi-thread or multi-core GPU. Our approach is to implement a linear-time, hash-based, single program multiple data (SPMD), document inversion algorithm on the NVIDIA GPU/CUDA programming platform utilizing the huge computational power of the GPU, to develop high performance solutions for document indexing. Our proposed parallel document inversion system shows 2-3 times faster performance than a sequential system on two different test datasets from PubMed abstract and e-commerce product reviews. •Information systems➝Information retrieval • Computing methodologies➝Massively parallel and high-performance simulations.

Criteria Document for B-plant's Surveillance and Maintenance Phase Safety Basis Document

International Nuclear Information System (INIS)

SCHWEHR, B.A.

1999-01-01

This document is required by the Project Hanford Managing Contractor (PHMC) procedure, HNF-PRO-705, Safety Basis Planning, Documentation, Review, and Approval. This document specifies the criteria that shall be in the B Plant surveillance and maintenance phase safety basis in order to obtain approval of the DOE-RL. This CD describes the criteria to be addressed in the S and M Phase safety basis for the deactivated Waste Fractionization Facility (B Plant) on the Hanford Site in Washington state. This criteria document describes: the document type and format that will be used for the S and M Phase safety basis, the requirements documents that will be invoked for the document development, the deactivated condition of the B Plant facility, and the scope of issues to be addressed in the S and M Phase safety basis document

Towards a network of Urban Forest Eddy Covariance stations: a unique case study in Naples

Science.gov (United States)

Guidolotti, Gabriele; Pallozzi, Emanuele; Esposito, Raffaela; Mattioni, Michele; Calfapietra, Carlo

2015-04-01

Urban forests are by definition integrated in highly human-made areas, and interact with different components of our cities. Thanks to those interactions, urban forests provide to people and to the urban environment a number of ecosystem services, including the absorption of CO2 and air pollutants thus influencing the local air quality. Moreover, in urban areas a relevant role is played by the photochemical pollution which is strongly influenced by the interactions between volatile organic compounds (VOC) and nitrogen oxides (NOx). In several cities, a high percentage of VOC is of biogenic origin mainly emitted from the urban trees. Despite their importance, experimental sites monitoring fluxes of trace gases fluxes in urban forest ecosystems are still scarce. Here we show the preliminary results of an innovative experimental site located in the Royal Park of Capodimonte within the city of Naples (40°51'N-14°15'E, 130 m above sea level). The site is mainly characterised by Quercus ilex with some patches of Pinus pinea and equipped with an eddy-covariance tower measuring the exchange of CO2, H2O, N2O, CH4, O3, PM, VOCs and NOx using state-of-the art instrumentations; it is running since the end of 2014 and it is part of the large infrastructural I-AMICA project. We suggest that the experience gained with research networks such as Fluxnet and ICOS should be duplicated for urban forests. This is crucial for carbon as there is now the ambition to include urban forests in the carbon stocks accounting system. This is even more important to understand the difficult interactions between anthropogenic and biogenic sources that often have negative implications for urban air quality. Urban environment can thus become an extraordinary case study and a network of such kind of stations might represent an important strategy both from the scientific and the applicative point of view.

SECAD-- a Schema-based Environment for Configuring, Analyzing and Documenting Integrated Fusion Simulations. Final report

International Nuclear Information System (INIS)

Shasharina, Svetlana

2012-01-01

SECAD is a project that developed a GUI for running integrated fusion simulations as implemented in FACETS and SWIM SciDAC projects. Using the GUI users can submit simulations locally and remotely and visualize the simulation results

Improving Self-Management of Type 2 Diabetes in Overweight and Inactive Patients Through an Educational and Motivational Intervention Addressing Diet and Physical Activity: A Prospective Study in Naples, South Italy.

Science.gov (United States)

Gallé, Francesca; Di Onofrio, Valeria; Cirella, Assunta; Di Dio, Mirella; Miele, Alessandra; Spinosa, Tiziana; Liguori, Giorgio

2017-08-01

Nutrition and physical activity are key elements in the prevention and management of type 2 diabetes. A community-based, multidisciplinary educational intervention aimed to improve quality of life and disease self-management in sedentary, overweight/obese type 2 diabetic patients was implemented in Naples, South Italy. The 9-month intervention included a motivational program, a nutrition program, and an exercise program. Satisfaction, worry, and embarrassment regarding their condition, together with disease-related behaviors and propensity towards physical activity, were evaluated through a validated questionnaire before and after the intervention; health status perception was evaluated through the short-form 12 questionnaire. Changes in HbA1c level and weight were also checked. A significant improvement (p management of hypoglycemic crisis and food choice; in nearly all the items related to living with the disease (p System.

Physics and detector simulation facility Type O workstation specifications

International Nuclear Information System (INIS)

Chartrand, G.; Cormell, L.R.; Hahn, R.; Jacobson, D.; Johnstad, H.; Leibold, P.; Marquez, M.; Ramsey, B.; Roberts, L.; Scipioni, B.; Yost, G.P.

1990-11-01

This document specifies the requirements for the front-end network of workstations of a distributed computing facility. This facility will be needed to perform the physics and detector simulations for the design of Superconducting Super Collider (SSC) detectors, and other computations in support of physics and detector needs. A detailed description of the computer simulation facility is given in the overall system specification document. This document provides revised subsystem specifications for the network of monitor-less Type 0 workstations. The requirements specified in this document supersede the requirements given. In Section 2 a brief functional description of the facility and its use are provided. The list of detailed specifications (vendor requirements) is given in Section 3 and the qualifying requirements (benchmarks) are described in Section 4

Simulator justifications

International Nuclear Information System (INIS)

Fairchild, B.T.

1990-01-01

For several years, the authors have been convinced by overwhelming evidence that dynamic simulators are justified for many applications where acceptance has been slow. They speculate as to why this situation has existed and list many benefits that accrue to those who use simulators for training and other purposes. This paper along may be sufficient to convince a receptive approval chain of the value of simulator ownership. It is intended primarily as an aid and supporting document for those who find it necessary to build a detailed justification for a specific simulator acquisition. The purchase of a simulator requires justification. For new military aircraft and for spacecraft, a simulator for training and performance evaluation is virtually assumed, value having been proven many times over. for commercial aircraft, safety is the overwhelming justification. For nuclear power plants, government regulations require operators to be licensed by examination on a certified simulator. For other applications, including air traffic control, biomedical, communications, electronic power transmission and distribution, emergency engineering and management, fossil power plants, gaming land vehicles, manufacturing, maintenance, marine vehicles, process plants, weapons, etc

Xyce parallel electronic simulator design : mathematical formulation, version 2.0.

Energy Technology Data Exchange (ETDEWEB)

Hoekstra, Robert John; Waters, Lon J.; Hutchinson, Scott Alan; Keiter, Eric Richard; Russo, Thomas V.

2004-06-01

This document is intended to contain a detailed description of the mathematical formulation of Xyce, a massively parallel SPICE-style circuit simulator developed at Sandia National Laboratories. The target audience of this document are people in the role of 'service provider'. An example of such a person would be a linear solver expert who is spending a small fraction of his time developing solver algorithms for Xyce. Such a person probably is not an expert in circuit simulation, and would benefit from an description of the equations solved by Xyce. In this document, modified nodal analysis (MNA) is described in detail, with a number of examples. Issues that are unique to circuit simulation, such as voltage limiting, are also described in detail.

Generic safety documentation model

International Nuclear Information System (INIS)

Mahn, J.A.

1994-04-01

This document is intended to be a resource for preparers of safety documentation for Sandia National Laboratories, New Mexico facilities. It provides standardized discussions of some topics that are generic to most, if not all, Sandia/NM facilities safety documents. The material provides a ''core'' upon which to develop facility-specific safety documentation. The use of the information in this document will reduce the cost of safety document preparation and improve consistency of information

Documentation of CATHENA input files for the APOLLO computer

International Nuclear Information System (INIS)

1988-06-01

Input files created for the VAX version of the CATHENA two-fluid code have been modified and documented for simulation on the AECB's APOLLO computer system. The input files describe the RD-14 thermalhydraulic loop, the RD-14 steam generator, the RD-12 steam generator blowdown test facility, the Stern Laboratories Cold Water Injection Facility (CWIT), and a CANDU 600 reactor. Sample CATHENA predictions are given and compared with experimental results where applicable. 24 refs

WIPP documentation plan

International Nuclear Information System (INIS)

Plung, D.L.; Montgomery, T.T.; Glasstetter, S.R.

1986-01-01

In support of the programs at the Waste Isolation Pilot Plant (WIPP), the Publications and Procedures Section developed a documentation plan that provides an integrated document hierarchy; further, this plan affords several unique features: 1) the format for procedures minimizes the writing responsibilities of the technical staff and maximizes use of the writing and editing staff; 2) review cycles have been structured to expedite the processing of documents; and 3) the numbers of documents needed to support the program have been appreciably reduced

2002 reference document; Document de reference 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

Software Platform Evaluation - Verifiable Fuel Cycle Simulation (VISION) Model

International Nuclear Information System (INIS)

J. J. Jacobson; D. E. Shropshire; W. B. West

2005-01-01

The purpose of this Software Platform Evaluation (SPE) is to document the top-level evaluation of potential software platforms on which to construct a simulation model that satisfies the requirements for a Verifiable Fuel Cycle Simulation Model (VISION) of the Advanced Fuel Cycle (AFC). See the Software Requirements Specification for Verifiable Fuel Cycle Simulation (VISION) Model (INEEL/EXT-05-02643, Rev. 0) for a discussion of the objective and scope of the VISION model. VISION is intended to serve as a broad systems analysis and study tool applicable to work conducted as part of the AFCI (including costs estimates) and Generation IV reactor development studies. This document will serve as a guide for selecting the most appropriate software platform for VISION. This is a ''living document'' that will be modified over the course of the execution of this work

Superfund record of decision (EPA Region 3): Southern Maryland Wood Treating Site, Hollywood, MD, September 8, 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

The decision document presents the selected remedial action for the Southern Maryland Wood Treating Site (`the Site`), in Hollywood, Maryland. This is the second and final phase of remedial action for the Site. This phase addresses soil and sediment contamination and non-aqueous phase liquids (`NAPLs`) which are the principal threats remaining at the Site and are a source of contamination to the ground water and surface water.

Documenting Employee Conduct

Science.gov (United States)

Dalton, Jason

2009-01-01

One of the best ways for a child care program to lose an employment-related lawsuit is failure to document the performance of its employees. Documentation of an employee's performance can provide evidence of an employment-related decision such as discipline, promotion, or discharge. When properly implemented, documentation of employee performance…

Health physics documentation

International Nuclear Information System (INIS)

Stablein, G.

1980-01-01

When dealing with radioactive material the health physicist receives innumerable papers and documents within the fields of researching, prosecuting, organizing and justifying radiation protection. Some of these papers are requested by the health physicist and some are required by law. The scope, quantity and deposit periods of the health physics documentation at the Karlsruhe Nuclear Research Center are presented and rationalizing methods discussed. The aim of this documentation should be the application of physics to accident prevention, i.e. documentation should protect those concerned and not the health physicist. (H.K.)

Dynamic models of staged gasification processes. Documentation of gasification simulator; Dynamiske modeller a f trinopdelte forgasningsprocesser. Dokumentation til forgasser simulator

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-02-15

In connection with the ERP project 'Dynamic modelling of staged gasification processes' a gasification simulator has been constructed. The simulator consists of: a mathematical model of the gasification process developed at Technical University of Denmark, a user interface programme, IGSS, and a communication interface between the two programmes. (BA)

Large Scale Document Inversion using a Multi-threaded Computing System

Science.gov (United States)

Jung, Sungbo; Chang, Dar-Jen; Park, Juw Won

2018-01-01

Current microprocessor architecture is moving towards multi-core/multi-threaded systems. This trend has led to a surge of interest in using multi-threaded computing devices, such as the Graphics Processing Unit (GPU), for general purpose computing. We can utilize the GPU in computation as a massive parallel coprocessor because the GPU consists of multiple cores. The GPU is also an affordable, attractive, and user-programmable commodity. Nowadays a lot of information has been flooded into the digital domain around the world. Huge volume of data, such as digital libraries, social networking services, e-commerce product data, and reviews, etc., is produced or collected every moment with dramatic growth in size. Although the inverted index is a useful data structure that can be used for full text searches or document retrieval, a large number of documents will require a tremendous amount of time to create the index. The performance of document inversion can be improved by multi-thread or multi-core GPU. Our approach is to implement a linear-time, hash-based, single program multiple data (SPMD), document inversion algorithm on the NVIDIA GPU/CUDA programming platform utilizing the huge computational power of the GPU, to develop high performance solutions for document indexing. Our proposed parallel document inversion system shows 2-3 times faster performance than a sequential system on two different test datasets from PubMed abstract and e-commerce product reviews. CCS Concepts •Information systems➝Information retrieval • Computing methodologies➝Massively parallel and high-performance simulations.

High Performance Electrical Modeling and Simulation Verification Test Suite - Tier I; TOPICAL

International Nuclear Information System (INIS)

SCHELLS, REGINA L.; BOGDAN, CAROLYN W.; WIX, STEVEN D.

2001-01-01

This document describes the High Performance Electrical Modeling and Simulation (HPEMS) Global Verification Test Suite (VERTS). The VERTS is a regression test suite used for verification of the electrical circuit simulation codes currently being developed by the HPEMS code development team. This document contains descriptions of the Tier I test cases

Large Hospital 50% Energy Savings: Technical Support Document

Energy Technology Data Exchange (ETDEWEB)

Bonnema, E.; Studer, D.; Parker, A.; Pless, S.; Torcellini, P.

2010-09-01

This Technical Support Document documents the technical analysis and design guidance for large hospitals to achieve whole-building energy savings of at least 50% over ANSI/ASHRAE/IESNA Standard 90.1-2004 and represents a step toward determining how to provide design guidance for aggressive energy savings targets. This report documents the modeling methods used to demonstrate that the design recommendations meet or exceed the 50% goal. EnergyPlus was used to model the predicted energy performance of the baseline and low-energy buildings to verify that 50% energy savings are achievable. Percent energy savings are based on a nominal minimally code-compliant building and whole-building, net site energy use intensity. The report defines architectural-program characteristics for typical large hospitals, thereby defining a prototype model; creates baseline energy models for each climate zone that are elaborations of the prototype models and are minimally compliant with Standard 90.1-2004; creates a list of energy design measures that can be applied to the prototype model to create low-energy models; uses industry feedback to strengthen inputs for baseline energy models and energy design measures; and simulates low-energy models for each climate zone to show that when the energy design measures are applied to the prototype model, 50% energy savings (or more) are achieved.

Civic activation, vulnerable subjects and public space: the case of the park of Rione Traiano in Naples

Directory of Open Access Journals (Sweden)

Gabriella Esposito

2013-06-01

Full Text Available The woman, in every kind of human settlement, culture as well a time, plays a peculiar role in terms of active observation and multitasking actor of the urban form and their organization model. Studying urban phenomena through the filter of the gender interpretation and fostering a proactive participation of women in the process of urban planning could provide added value in terms of feasibility, effectiveness and efficiency. In this paper it was decided to dealing with this issue in the framework of public spaces through the construction of a case study centered on women-mothers and their contribution for interpreting and being proactive in a participatory process of urban regeneration. The expected result of this interactive process is twofold: developing a generalized methodology of interaction with communities for interpreting, in terms of space organization, the demand they express on the one hand as well as for dealing with specific context, with the involvement of activists and associations to define and share possible trajectories of transformation of public spaces, on the other hand. To pursue this goal we have chosen to deal with the specificities of a complex environment such as Naples and with a CEP district, the largest in Italy, whose construction was initiated in 1960: Rione Traiano. In this area has started a dialogue, with non-profit organizations operating in the area first and then with women in the community, in order to address the relationship between vulnerable people and public spaces, testing a methodology for interaction and civic activation finalized to collect, prioritize and translate into proposals instances as expressed by these subjects. The disciplinary horizon selected is the integration between established tools of community planning and project strategies typical of urban design.

Upgrades to the Probabilistic NAS Platform Air Traffic Simulation Software

Science.gov (United States)

Hunter, George; Boisvert, Benjamin

2013-01-01

This document is the final report for the project entitled "Upgrades to the Probabilistic NAS Platform Air Traffic Simulation Software." This report consists of 17 sections which document the results of the several subtasks of this effort. The Probabilistic NAS Platform (PNP) is an air operations simulation platform developed and maintained by the Saab Sensis Corporation. The improvements made to the PNP simulation include the following: an airborne distributed separation assurance capability, a required time of arrival assignment and conformance capability, and a tactical and strategic weather avoidance capability.

FACSIM/MRS-1: Cask receiving and consolidation model documentation and user's guide

International Nuclear Information System (INIS)

Lotz, T.L.; Shay, M.R.

1987-06-01

The Pacific Northwest Laboratory (PNL) has developed a stochastic computer model, FACSIM/MRS, to assist in assessing the operational performance of the Monitored Retrievable Storage (MRS) waste-handling facility. This report provides the documentation and user's guide for the component FACSIM/MRS-1, which is also referred to as the front-end model. The FACSIM/MRS-1 model simulates the MRS cask-receiving and spent-fuel consolidation activities. The results of the assessment of the operational performance of these activities are contained in a second report, FACSIM/MRS-1: Cask Receiving and Consolidation Performance Assessment (Lotz and Shay 1987). The model of MRS canister storage and shipping operations is presented in FACSIM/MRS-2: Storage and Shipping Model Documentation and User's Guide (Huber et al. 1987). The FACSIM/MRS model uses the commercially available FORTRAN-based SIMAN (SIMulation ANalysis language) simulation package (Pegden 1982). SIMAN provides a set of FORTRAN-coded commands, called block operations, which are used to build detailed models of continuous or discrete events that make up the operations of any process, such as the operation of an MRS facility. The FACSIM models were designed to run on either an IBM-PC or a VAX minicomputer. The FACSIM/MRS-1 model is flexible enough to collect statistics concerning almost any aspect of the cask receiving and consolidation operations of an MRS facility. The MRS model presently collects statistics on 51 quantities of interest during the simulation. SIMAN reports the statistics with two forms of output: a SIMAN simulation summary and an optional set of SIMAN output files containing data for use by more detailed post processors and report generators

Simulators for training nuclear power plant personnel

International Nuclear Information System (INIS)

1993-01-01

Simulator training and retraining of operations personnel is essential for their acquiring the necessary knowledge, skills and qualification for operating a nuclear power plant, and for effective feedback of experience including human based operating errors. Simulator training is the most effective way by far of training operations personnel in co-operation and communication in a team, which also involves instilling attitudes and approaches for achieving excellence and individual responsibility and alertness. This technical document provides guidance to Member States on the procurement, setting up and utilization of a simulator training centre; it will also be useful for organizations with previous experience in the use of simulators for training. The document is the result of a series of advisory and consultants meetings held in the framework of the International Working Group on Nuclear Power Plant Control and Instrumentation in 1989-1992. 17 refs, 2 tabs

Standardization Documents

Science.gov (United States)

2011-08-01

Specifications and Standards; Guide Specifications; CIDs; and NGSs . Learn. Perform. Succeed. STANDARDIZATION DOCUMENTS Federal Specifications Commercial...national or international standardization document developed by a private sector association, organization, or technical society that plans ...Maintain lessons learned • Examples: Guidance for application of a technology; Lists of options Learn. Perform. Succeed. DEFENSE HANDBOOK

Dynamic Simulator for Nuclear Power Plants (DSNP)

International Nuclear Information System (INIS)

Saphier, D.

1976-01-01

A new simulation language DSNP (Dynamic Simulator for Nuclear Power Plants) is being developed. It is a simple block oriented simulation language with an extensive library of component and auxiliary modules. Each module is a self-contained unit of a part of a physical component to be found in nuclear power plants. Each module will be available in four levels of sophistication, the fourth being a user supplied model. A module can be included in the simulation by a single statement. The precompiler translates DSNP statements into FORTRAN statements, takes care of the module parameters and the intermodular communication blocks, prepares proper data files and I/0 statements and searches the various libraries for the appropriate component modules. The documentation is computerized and all the necessary information for a particular module can be retrieved by a special document generator. The DSNP will be a flexible tool which will allow dynamic simulations to be performed on a large variety of nuclear power plants or specific components of these plants

Pydna: a simulation and documentation tool for DNA assembly strategies using python.

Science.gov (United States)

Pereira, Filipa; Azevedo, Flávio; Carvalho, Ângela; Ribeiro, Gabriela F; Budde, Mark W; Johansson, Björn

2015-05-02

Recent advances in synthetic biology have provided tools to efficiently construct complex DNA molecules which are an important part of many molecular biology and biotechnology projects. The planning of such constructs has traditionally been done manually using a DNA sequence editor which becomes error-prone as scale and complexity of the construction increase. A human-readable formal description of cloning and assembly strategies, which also allows for automatic computer simulation and verification, would therefore be a valuable tool. We have developed pydna, an extensible, free and open source Python library for simulating basic molecular biology DNA unit operations such as restriction digestion, ligation, PCR, primer design, Gibson assembly and homologous recombination. A cloning strategy expressed as a pydna script provides a description that is complete, unambiguous and stable. Execution of the script automatically yields the sequence of the final molecule(s) and that of any intermediate constructs. Pydna has been designed to be understandable for biologists with limited programming skills by providing interfaces that are semantically similar to the description of molecular biology unit operations found in literature. Pydna simplifies both the planning and sharing of cloning strategies and is especially useful for complex or combinatorial DNA molecule construction. An important difference compared to existing tools with similar goals is the use of Python instead of a specifically constructed language, providing a simulation environment that is more flexible and extensible by the user.

Simulation of a Downsized FDM Nozzle

DEFF Research Database (Denmark)

Hofstätter, Thomas; Pimentel, Rodrigo; Pedersen, David B.

2015-01-01

This document discusses the simulat-ion of a downsized nozzle for fused deposition modelling (FDM), namely the E3D HotEnd Extruder with manufactured diameters of 200-400 μm in the nozzle tip. The nozzle has been simulated in terms of heat transfer and fluid flow giving an insight into the physical...

Synthesis document on the long time behavior of packages: operational document ''bituminous'' 2204

International Nuclear Information System (INIS)

Tiffreau, C.

2004-09-01

This document is realized in the framework of the law of 1991 on the radioactive wastes management. The 2004 synthesis document on long time behavior of bituminous sludges packages is constituted by two documents, the reference document and the operational document. This paper presents the operational model describing the water alteration of the packages and the associated radioelements release, as the gas term source and the swelling associated to the self-irradiation and the bituminous radiolysis. (A.L.B.)

Interfacial tension-induced transport of nonaqueous phase liquids in model aquifer systems

International Nuclear Information System (INIS)

Anderson, M.A.

1994-01-01

Nonaqueous phase liquids (NAPLs) such as organic solvents and fuel are common contaminants in soils and groundwater. Spills, leaking underground storage tanks, and improper disposal practices all result in the release and movement of NAPLs through soils. Movement of NAPLs through soil is considered to result from gravity- and /or capillarity-driven immiscible phase flow. Dispersive and convective transport of dissolved components, volatilization, sorption, and degradation are also considered important processes in NAPL contamination. An additional transport mechanism in which NAPLs spread on water surfaces due to differential adhesive and cohesive attractive forces is demonstrated in this study. 22 refs., 5 figs., 1 tab

Avaliação do desempenho de surfactantes para a solubilização de fases líquidas não aquosas em meio aquoso Evaluating surfactant performance as solubilizer of non-aqueous phase liquids within aqueous media

Directory of Open Access Journals (Sweden)

Elizabeth Fátima de Souza

2010-01-01

Full Text Available The presence of non-aqueous phase liquids (NAPLs in the subsurface is a threat to public health as well as a serious environmental issue. NAPLs may remain adsorbed or form lenses floating on aquifers causing long-term contaminations. Surfactants may increase NAPLs solubility, enhancing the pump-and-treatment performance. Size, shape, hydration and ionization degree of the micelles define the affinity and the space available for the solubilization of a particular contaminating agent. The tests carried out at laboratory scale, taking into account the NAPL to be removed and the medium characteristics were useful to select surfactants and evaluate their efficiency as NAPLs solubilizers.

From urchins to sailors: an educative and civic experiment in Naples (1913-1928 - The story of “Caracciolo”, between poverty, social solidarity and education challenges.

Directory of Open Access Journals (Sweden)

Maria Antonietta Selvaggio

2014-01-01

Full Text Available This paper proposes to examine Giulia Civita Franceschi’s work in the city of Naples, in favour of abandoned childhood. Between 1913 and 1928, she obtained by the Ministry of Navy and steered the training ship Caracciolo, which became for many urchins their home and family. So, they had the occasion to be saved from misery and delinquency. While before it they crowded streets, squares and arcades of the city, searching charity and ready to steel for surviving, on board ship they became little sailors, living a laborious and restrained life. Civita, inspiring to the concept of the sea as an educator, showed that thanks to her method, edged children and boys could become citizens, conscious of their rights and duties. The ship was site of visits by Italian and foreign delegations, which went to observe closer an educative experiment, considered as a pattern to imitate. The ship was a «second birth» for the Neapolitan urchins, offering them a new starting point, not an arrival point or a temporary protective recovery. The orientation impressed by Giulia Civita, in fact, marked the “Caracciolo” among other similar experiences as a unique educative pattern.

Seasonal patterns in plankton communities in a pluriannual time series at a coastal Mediterranean site (Gulf of Naples: an attempt to discern recurrences and trends

Directory of Open Access Journals (Sweden)

M. Ribera d'Alcalà

2004-04-01

Full Text Available The annual cycle of plankton was studied over 14 years from 1984 to 2000 at a coastal station in the Gulf of Naples, with the aim of assessing seasonal patterns and interannual trends. Phytoplankton biomass started increasing over the water column in February-early March, and generally achieved peak values in the upper layers in late spring. Another peak was often recorded in autumn. Diatoms and phytoflagellates dominated for the largest part of the year. Ciliates showed their main peaks in phase with phytoplankton and were mainly represented by small (< 30 mm naked choreotrichs. Mesozooplankton increased in March-April, reaching maximum concentrations in summer. Copepods were always the most abundant group, followed by cladocerans in summer. At the interannual scale, a high variability and a decreasing trend were recorded over the sampling period for autotrophic biomass. Mesozooplankton biomass showed a less marked interannual variability. From 1995 onwards, phytoplankton populations increased in cell number but decreased in cell size, with intense blooms of small diatoms and undetermined coccoid species frequently observed in recent years. In spite of those interannual variations, the different phases of the annual cycle and the occurrence of several plankton species were remarkably regular.

Securing XML Documents

Directory of Open Access Journals (Sweden)

Charles Shoniregun

2004-11-01

Full Text Available XML (extensible markup language is becoming the current standard for establishing interoperability on the Web. XML data are self-descriptive and syntax-extensible; this makes it very suitable for representation and exchange of semi-structured data, and allows users to define new elements for their specific applications. As a result, the number of documents incorporating this standard is continuously increasing over the Web. The processing of XML documents may require a traversal of all document structure and therefore, the cost could be very high. A strong demand for a means of efficient and effective XML processing has posed a new challenge for the database world. This paper discusses a fast and efficient indexing technique for XML documents, and introduces the XML graph numbering scheme. It can be used for indexing and securing graph structure of XML documents. This technique provides an efficient method to speed up XML data processing. Furthermore, the paper explores the classification of existing methods impact of query processing, and indexing.

Enhanced Verification Test Suite for Physics Simulation Codes

Energy Technology Data Exchange (ETDEWEB)

Kamm, J R; Brock, J S; Brandon, S T; Cotrell, D L; Johnson, B; Knupp, P; Rider, W; Trucano, T; Weirs, V G

2008-10-10

This document discusses problems with which to augment, in quantity and in quality, the existing tri-laboratory suite of verification problems used by Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and Sandia National Laboratories (SNL). The purpose of verification analysis is demonstrate whether the numerical results of the discretization algorithms in physics and engineering simulation codes provide correct solutions of the corresponding continuum equations. The key points of this document are: (1) Verification deals with mathematical correctness of the numerical algorithms in a code, while validation deals with physical correctness of a simulation in a regime of interest. This document is about verification. (2) The current seven-problem Tri-Laboratory Verification Test Suite, which has been used for approximately five years at the DOE WP laboratories, is limited. (3) Both the methodology for and technology used in verification analysis have evolved and been improved since the original test suite was proposed. (4) The proposed test problems are in three basic areas: (a) Hydrodynamics; (b) Transport processes; and (c) Dynamic strength-of-materials. (5) For several of the proposed problems we provide a 'strong sense verification benchmark', consisting of (i) a clear mathematical statement of the problem with sufficient information to run a computer simulation, (ii) an explanation of how the code result and benchmark solution are to be evaluated, and (iii) a description of the acceptance criterion for simulation code results. (6) It is proposed that the set of verification test problems with which any particular code be evaluated include some of the problems described in this document. Analysis of the proposed verification test problems constitutes part of a necessary--but not sufficient--step that builds confidence in physics and engineering simulation codes. More complicated test cases, including physics models of

Information Types in Nonmimetic Documents: A Review of Biddle's Wipe-Clean Slate (Understanding Documents).

Science.gov (United States)

Mosenthal, Peter B.; Kirsch, Irwin S.

1991-01-01

Describes how the 16 permanent lists used by a first grade reading teacher (and mother of 6) to manage the household represents the whole range of documents covered in the 3 major types of documents: matrix documents, graphic documents, and locative documents. Suggests class activities to clarify students' understanding of the information in…

Technical approach document

International Nuclear Information System (INIS)

1988-04-01

This document describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement Remedial Action Plans (RAPs) and final designs that comply with EPS standards. This document is a revision to the original document. Major revisions were made to the sections in riprap selection and sizing, and ground-water; only minor revisions were made to the remainder of the document. The US Nuclear Regulatory Commission (NRC) has prepared a Standard Review Plan (NRC-SRP) which describes factors to be considered by the NRC in approving the RAP. Sections 3.0, 4.0, 5.0, and 7.0 of this document are arranged under the same headings as those used in the NRC-SRP. This approach is adopted in order to facilitate joint use of the documents. Section 2.0 (not included in the NRC-SRP) discusses design considerations; Section 3.0 describes surface-water hydrology and erosion control; Section 4.0 describes geotechnical aspects of pile design; Section 5.0 discusses the Alternate Site Selection Process; Section 6.0 deals with radiological issues (in particular, the design of the radon barrier); Section 7.0 discusses protection of groundwater resources; and Section 8.0 discusses site design criteria for the RAC

Documentation and user's guide for DOSTOMAN: a pathways computer model of radionuclide movement

International Nuclear Information System (INIS)

Root, R.W. Jr.

1980-01-01

This report documents the mathematical development and the computer implementation of the Savannah River Laboratory computer code used to simulate radonuclide movement in the environment. The user's guide provides all the necessary information for the prospective user to input the required data, execute the computer program, and display the results

Documentation for MeshKit - Reactor Geometry (&mesh) Generator

Energy Technology Data Exchange (ETDEWEB)

Jain, Rajeev [Argonne National Lab. (ANL), Argonne, IL (United States); Mahadevan, Vijay [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-09-30

This report gives documentation for using MeshKit’s Reactor Geometry (and mesh) Generator (RGG) GUI and also briefly documents other algorithms and tools available in MeshKit. RGG is a program designed to aid in modeling and meshing of complex/large hexagonal and rectilinear reactor cores. RGG uses Argonne’s SIGMA interfaces, Qt and VTK to produce an intuitive user interface. By integrating a 3D view of the reactor with the meshing tools and combining them into one user interface, RGG streamlines the task of preparing a simulation mesh and enables real-time feedback that reduces accidental scripting mistakes that could waste hours of meshing. RGG interfaces with MeshKit tools to consolidate the meshing process, meaning that going from model to mesh is as easy as a button click. This report is designed to explain RGG v 2.0 interface and provide users with the knowledge and skills to pilot RGG successfully. Brief documentation of MeshKit source code, tools and other algorithms available are also presented for developers to extend and add new algorithms to MeshKit. RGG tools work in serial and parallel and have been used to model complex reactor core models consisting of conical pins, load pads, several thousands of axially varying material properties of instrumentation pins and other interstices meshes.

Enterprise Document Management

Data.gov (United States)

US Agency for International Development — The function of the operation is to provide e-Signature and document management support for Acquisition and Assisitance (A&A) documents including vouchers in...

Radon distribution in a gasoline-contaminated aquifer

International Nuclear Information System (INIS)

Fan, K.; Kuo, T.; Han, Y.; Chen, C.; Lin, C.; Lee, C.

2007-01-01

Naturally occurring radon-222 gas in groundwater was investigated as a partitioning tracer to detect non-aqueous phase liquid (NAPL) in a gasoline-contaminated aquifer. The radon-222 activity of groundwater decreased significantly from an average of 7.38+/-1.68BqL -1 measured in monitoring wells located upgradient in the uncontaminated zone to an average of 2.30+/-0.60BqL -1 measured in monitoring wells inside the NAPL source zone. Meanwhile, the radium-226 concentrations measured in aquifer matrix were virtually homogeneous at several locations both upgradient of and inside the NAPL source zone. Furthermore, the NAPL concentration obtained from the Radon Deficit Factor agrees reasonably with the results derived from direct sampling and chemical analysis of soil samples taken from the residual NAPL source zone. The field results of this study confirmed the general applicability of groundwater radon to detect residual NAPL source zone

Challenges & Roadmap for Beyond CMOS Computing Simulation.

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Arun F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Frank, Michael P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-12-01

Simulating HPC systems is a difficult task and the emergence of “Beyond CMOS” architectures and execution models will increase that difficulty. This document presents a “tutorial” on some of the simulation challenges faced by conventional and non-conventional architectures (Section 1) and goals and requirements for simulating Beyond CMOS systems (Section 2). These provide background for proposed short- and long-term roadmaps for simulation efforts at Sandia (Sections 3 and 4). Additionally, a brief explanation of a proof-of-concept integration of a Beyond CMOS architectural simulator is presented (Section 2.3).

SED-ML web tools: generate, modify and export standard-compliant simulation studies.

Science.gov (United States)

Bergmann, Frank T; Nickerson, David; Waltemath, Dagmar; Scharm, Martin

2017-04-15

The Simulation Experiment Description Markup Language (SED-ML) is a standardized format for exchanging simulation studies independently of software tools. We present the SED-ML Web Tools, an online application for creating, editing, simulating and validating SED-ML documents. The Web Tools implement all current SED-ML specifications and, thus, support complex modifications and co-simulation of models in SBML and CellML formats. Ultimately, the Web Tools lower the bar on working with SED-ML documents and help users create valid simulation descriptions. http://sysbioapps.dyndns.org/SED-ML_Web_Tools/ . fbergman@caltech.edu . © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Tank Monitoring and Document control System (TMACS) As Built Software Design Document

International Nuclear Information System (INIS)

GLASSCOCK, J.A.

2000-01-01

This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions

CNEA's quality system documentation

International Nuclear Information System (INIS)

Mazzini, M.M.; Garonis, O.H.

1998-01-01

Full text: To obtain an effective and coherent documentation system suitable for CNEA's Quality Management Program, we decided to organize the CNEA's quality documentation with : a- Level 1. Quality manual. b- Level 2. Procedures. c-Level 3. Qualities plans. d- Level 4: Instructions. e- Level 5. Records and other documents. The objective of this work is to present a standardization of the documentation of the CNEA's quality system of facilities, laboratories, services, and R and D activities. Considering the diversity of criteria and formats for elaboration the documentation by different departments, and since ultimately each of them generally includes the same quality management policy, we proposed the elaboration of a system in order to improve the documentation, avoiding unnecessary time wasting and costs. This will aloud each sector to focus on their specific documentation. The quality manuals of the atomic centers fulfill the rule 3.6.1 of the Nuclear Regulatory Authority, and the Safety Series 50-C/SG-Q of the International Atomic Energy Agency. They are designed by groups of competent and highly trained people of different departments. The normative procedures are elaborated with the same methodology as the quality manuals. The quality plans which describe the organizational structure of working group and the appropriate documentation, will asses the quality manuals of facilities, laboratories, services, and research and development activities of atomic centers. The responsibilities for approval of the normative documentation are assigned to the management in charge of the administration of economic and human resources in order to fulfill the institutional objectives. Another improvement aimed to eliminate unnecessary invaluable processes is the inclusion of all quality system's normative documentation in the CNEA intranet. (author) [es

Changing Landscapes in Documentation Efforts: Civil Society Documentation of Serious Human Rights Violations

Directory of Open Access Journals (Sweden)

Brianne McGonigle Leyh

2017-04-01

Full Text Available Wittingly or unwittingly, civil society actors have long been faced with the task of documenting serious human rights violations. Thirty years ago, such efforts were largely organised by grassroots movements, often with little support or funding from international actors. Sharing information and best practices was difficult. Today that situation has significantly changed. The purpose of this article is to explore the changing landscape of civil society documentation of serious human rights violations, and what that means for standardising and professionalising documentation efforts. Using the recent Hisséne Habré case as an example, this article begins by looking at how civil society documentation can successfully influence an accountability process. Next, the article touches upon barriers that continue to impede greater documentation efforts. The article examines the changing landscape of documentation, focusing on technological changes and the rise of citizen journalism and unofficial investigations, using Syria as an example, as well as on the increasing support for documentation efforts both in Syria and worldwide. The changing landscape has resulted in the proliferation of international documentation initiatives aimed at providing local civil society actors guidelines and practical assistance on how to recognise, collect, manage, store and use information about serious human rights violations, as well as on how to minimise the risks associated with the documentation of human rights violations. The recent initiatives undertaken by international civil society, including those by the Public International Law & Policy Group, play an important role in helping to standardise and professionalise documentation work and promote the foundational principles of documentation, namely the ‘do no harm’ principle, and the principles of informed consent and confidentiality. Recognising the drawback that greater professionalisation may bring, it

Observatory response to a volcanic crisis: the Campi Flegrei simulation exercise

Science.gov (United States)

Papale, Paolo; De Natale, Giuseppe

2015-04-01

In Febraury 2014 a simulation exercise was conducted at Campi Flegrei, Italy, in order to test the scientific response capabilities and the effectiveness of communication with Civil Protection authorities. The simulation was organized in the frame of the EU-VUELCO project, and involved the participation of the Osservatorio Vesuviano of INGV (INGV-OV) corroborated by other INGV scientists involved for their specific competencies; and the Italian Civil Protection, which was supported by an expert team formed by selected experts from the Italian academy and by VUELCO scientists from several EU and Latin American countries. The simulation included a previously appointed group of four volcanologists covering a range of expertise in volcano seismology, geodesy, geochemistry, and with experience both on the Campi Flegrei system and on other volcanic systems and crises in the world. The duty of this 'volcano team' was that of producing consistent sets of signals, that were sent to INGV-OV at the beginning of each simulation phase. In turn, the observatory response was that of i) immediately communicate the relevant observations to the Civil Protection; ii) analyze the synthetic signals and observations and extract a consistent picture and interpretation, including the analysis and quantification of uncertainties; iii) organize all the information produced in a bulletin, that was sent to the Civil Protection at the end of each simulation phase and that contained, according to national established agreements, a) the information available, and b) its interpretation including forecasts on the possible medium-short term evolution. The test included four simulation phases and it was blind, as only the volcano team knew the evolution and the final outcome; the volcano team was located at the INGV buildings in Rome, far from INGV-OV in Naples and the Civil Protection Dept. still in Rome, and with no contacts with any of them for the entire duration of the simulation. In this

Imaginary Documentary: reflecting upon contemporary documental photography Documentário Imaginário: reflexões sobre a fotografia documental contemporânea

Directory of Open Access Journals (Sweden)

Kátia Hallak Lombardi

2008-01-01

Full Text Available This article pursues the idea of an Imaginary Documentary – a possible new inflexion on the practices of contemporary documental photography. The text establishes its theoretical foundations through a forthcoming approach of the discussions about documental photography to the concept of imaginary, by Gilbert Durand, and the notion of Imaginary Museum, by André Malraux. Photographers that are part of documental photography history are the elected objects in which we shall confront the potentialities of the Imaginary Documentary. Este artigo tem como propósito buscar a estruturação da idéia de Documentário Imaginário – uma possível inflexão na prática da fotografia documental contemporânea. O texto assenta suas bases teóricas por meio da aproximação de reflexões sobre a fotografia documental ao conceito de imaginário em Gilbert Durand e à noção de Museu Imaginário de André Malraux. Fotógrafos que fazem parte da história da fotografia documental são os objetos eleitos para aferir as potencialidades do Documentário Imaginário.

Diagnostic analysis of stone materials from underwater excavations: the case study of the Roman archaeological site of Baia (Naples, Italy)

International Nuclear Information System (INIS)

Aloise, P.; Ricca, M.; La Russa, M.F.; Ruffolo, S.A.; Crisci, G.M.; Belfiore, C.M.; Padeletti, G.

2014-01-01

This work belongs to the framework of the national research project ''COMAS'' (Planned COnservation, ''in situ'', of underwater archaeological artifacts), funded by the Italian Ministry of Education, Universities and Research (MIUR), concerning the submarine archaeological area of Baia (Naples, Italy). The site includes remains of the ancient cities of Baiae and Portus Iulius, which, since the 4th century AD, started to be submerged because of the bradyseism phenomenon. The work aims to the characterization of four different types of stone materials collected from the site, specifically marbles, limestones, ignimbrites, and bricks, in order to investigate their state of conservation. In particular, specimens were sampled from some masonry structures and pavement slabs (opus sectile) in a specific area of the submerged site, called ''Villa a Protiro''. In order to characterize archaeological samples from a mineralogical-petrographic point of view, polarized optical microscopy and X-ray diffraction analyses were carried out, while to assess their conservation state, the surface colonization by biodeteriogen agents and their interaction with the substrate were studied through observations under a stereomicroscope, scanning electron microscopy and Fourier transform infrared spectroscopy. Marble and limestone samples revealed an intense bioerosion phenomena, attributable to epilithic and endolithic forms, particularly boring sponges. On the contrary, ignimbrites suffer a lower degree of biological colonization related to the activity of other species, such as serpulids and bryozoans. In bricks, biocolonisation is correlated to the type of temper used in the artifact, the quartz pastes having a greater susceptibility to biological attack than the volcanic ones. (orig.)

Diagnostic analysis of stone materials from underwater excavations: the case study of the Roman archaeological site of Baia (Naples, Italy)

Science.gov (United States)

Aloise, P.; Ricca, M.; La Russa, M. F.; Ruffolo, S. A.; Belfiore, C. M.; Padeletti, G.; Crisci, G. M.

2014-03-01

This work belongs to the framework of the national research project "COMAS" (Planned COnservation, " in situ", of underwater archaeological artifacts), funded by the Italian Ministry of Education, Universities and Research (MIUR), concerning the submarine archaeological area of Baia (Naples, Italy). The site includes remains of the ancient cities of Baiae and Portus Iulius, which, since the 4th century AD, started to be submerged because of the bradyseism phenomenon. The work aims to the characterization of four different types of stone materials collected from the site, specifically marbles, limestones, ignimbrites, and bricks, in order to investigate their state of conservation. In particular, specimens were sampled from some masonry structures and pavement slabs ( opus sectile) in a specific area of the submerged site, called " Villa a Protiro". In order to characterize archaeological samples from a mineralogical-petrographic point of view, polarized optical microscopy and X-ray diffraction analyses were carried out, while to assess their conservation state, the surface colonization by biodeteriogen agents and their interaction with the substrate were studied through observations under a stereomicroscope, scanning electron microscopy and Fourier transform infrared spectroscopy. Marble and limestone samples revealed an intense bioerosion phenomena, attributable to epilithic and endolithic forms, particularly boring sponges. On the contrary, ignimbrites suffer a lower degree of biological colonization related to the activity of other species, such as serpulids and bryozoans. In bricks, biocolonisation is correlated to the type of temper used in the artifact, the quartz pastes having a greater susceptibility to biological attack than the volcanic ones.

Document management in engineering construction

International Nuclear Information System (INIS)

Liao Bing

2008-01-01

Document management is one important part of systematic quality management, which is one of the key factors to ensure the construction quality. In the engineering construction, quality management and document management shall interwork all the time, to ensure the construction quality. Quality management ensures that the document is correctly generated and adopted, and thus the completeness, accuracy and systematicness of the document satisfy the filing requirements. Document management ensures that the document is correctly transferred during the construction, and various testimonies such as files and records are kept for the engineering construction and its quality management. This paper addresses the document management in the engineering construction based on the interwork of the quality management and document management. (author)

Document Level Assessment of Document Retrieval Systems in a Pairwise System Evaluation

Science.gov (United States)

Rajagopal, Prabha; Ravana, Sri Devi

2017-01-01

Introduction: The use of averaged topic-level scores can result in the loss of valuable data and can cause misinterpretation of the effectiveness of system performance. This study aims to use the scores of each document to evaluate document retrieval systems in a pairwise system evaluation. Method: The chosen evaluation metrics are document-level…

Shoulder dystocia documentation: an evaluation of a documentation training intervention.

Science.gov (United States)

LeRiche, Tammy; Oppenheimer, Lawrence; Caughey, Sharon; Fell, Deshayne; Walker, Mark

2015-03-01

To evaluate the quality and content of nurse and physician shoulder dystocia delivery documentation before and after MORE training in shoulder dystocia management skills and documentation. Approximately 384 charts at the Ottawa Hospital General Campus involving a diagnosis of shoulder dystocia between the years of 2000 and 2006 excluding the training year of 2003 were identified. The charts were evaluated for 14 key components derived from a validated instrument. The delivery notes were then scored based on these components by 2 separate investigators who were blinded to delivery note author, date, and patient identification to further quantify delivery record quality. Approximately 346 charts were reviewed for physician and nurse delivery documentation. The average score for physician notes was 6 (maximum possible score of 14) both before and after the training intervention. The nurses' average score was 5 before and after the training intervention. Negligible improvement was observed in the content and quality of shoulder dystocia documentation before and after nurse and physician training.

Technical Support Document: Development of the Advanced Energy Design Guide for Small Office Buildings

Energy Technology Data Exchange (ETDEWEB)

Jarnagin, Ronald E.; Liu, Bing; Winiarski, David W.; McBride, Merle F.; Suharli, L.; Walden, D.

2006-11-30

This Technical Support Document (TSD) describes the process and methodology for the development of the Advanced Energy Design Guide for Small Office Buildings (AEDG-SO), a design guidance document intended to provide recommendations for achieving 30% energy savings in small office buildings over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-SO is the first in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the New Buildings Institute (NBI), and the U.S. Department of Energy (DOE). Each of the guides in the AEDG series will provide recommendations and user-friendly design assistance to designers, developers and owners of small commercial buildings that will encourage steady progress towards net-zero energy buildings. The guides will provide prescriptive recommendation packages that are capable of reaching the energy savings target for each climate zone in order to ease the burden of the design and construction of energy-efficient small commercial buildings The AEDG-SO was developed by an ASHRAE Special Project committee (SP-102) made up of representatives of each of the partner organizations in eight months. This TSD describes the charge given to the committee in developing the office guide and outlines the schedule of the development effort. The project committee developed two prototype office buildings (5,000 ft2 frame building and 20,000 ft2 two-story mass building) to represent the class of small office buildings and performed an energy simulation scoping study to determine the preliminary levels of efficiency necessary to meet the energy savings target. The simulation approach used by the project committee is documented in this TSD along with

Preparation and documentation of a CATHENA input file for Darlington NGS

International Nuclear Information System (INIS)

1989-03-01

A CATHENA input model has been developed and documented for the heat transport system of the Darlington Nuclear Generating Station. CATHENA, an advanced two-fluid thermalhydraulic computer code, has been designed for analysis of postulated loss-of-coolant accidents (LOCA) and upset conditions in the CANDU system. This report describes the Darlington input model (or idealization), and gives representative results for a simulation of a small break at an inlet header

Tank Monitoring and Document control System (TMACS) As Built Software Design Document

Energy Technology Data Exchange (ETDEWEB)

GLASSCOCK, J.A.

2000-01-27

This document describes the software design for the Tank Monitor and Control System (TMACS). This document captures the existing as-built design of TMACS as of November 1999. It will be used as a reference document to the system maintainers who will be maintaining and modifying the TMACS functions as necessary. The heart of the TMACS system is the ''point-processing'' functionality where a sample value is received from the field sensors and the value is analyzed, logged, or alarmed as required. This Software Design Document focuses on the point-processing functions.

Toward Documentation of Program Evolution

DEFF Research Database (Denmark)

Vestdam, Thomas; Nørmark, Kurt

2005-01-01

The documentation of a program often falls behind the evolution of the program source files. When this happens it may be attractive to shift the documentation mode from updating the documentation to documenting the evolution of the program. This paper describes tools that support the documentatio....... It is concluded that our approach can help revitalize older documentation, and that discovery of the fine grained program evolution steps help the programmer in documenting the evolution of the program....

Web document engineering

International Nuclear Information System (INIS)

White, B.

1996-05-01

This tutorial provides an overview of several document engineering techniques which are applicable to the authoring of World Wide Web documents. It illustrates how pre-WWW hypertext research is applicable to the development of WWW information resources

Biodegradation of naphthalene from nonaqueous-phase liquids

International Nuclear Information System (INIS)

Ghoshal, S.; Luthy, R.G.; Ramaswami, A.

1995-01-01

Dissolution of polycyclic aromatic hydrocarbons (PAHs) from a non-aqueous-phase liquid (NAPL) to the aqueous phase renders these compounds bioavailable to microorganisms. Subsequent biodegradation of organic phase PAH then results in a depletion of PAH from the NAPL. This study focuses on identifying the rate-controlling processes affecting naphthalene biomineralization from a complex multicomponent NAPL, coal tar, and a simple two-component NAPL. A simplified dissolution degradation model is presented to identify quantitative criteria to assess whether mass transfer or biokinetic limitations control the overall rate of biotransformation of PAH compounds. Results show that the rate of mass transfer may control the overall rate of biotransformation in certain systems. Mass transfer does not limit biodegradation in slurry systems when coal tar is distributed in the micropores of a large number of small microporous silica particles. The end points of naphthalene degradation from the NAPLs have been evaluated, and results suggest that depletion of a significant mass of naphthalene from the NAPL phase is possible

Documents preparation and review

International Nuclear Information System (INIS)

1999-01-01

Ignalina Safety Analysis Group takes active role in assisting regulatory body VATESI to prepare various regulatory documents and reviewing safety reports and other documentation presented by Ignalina NPP in the process of licensing of unit 1. The list of main documents prepared and reviewed is presented

Xyce Parallel Electronic Simulator Reference Guide Version 6.7.

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Aadithya, Karthik Venkatraman [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mei, Ting [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Russo, Thomas V. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schiek, Richard [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sholander, Peter E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Thornquist, Heidi K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Verley, Jason [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-05-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users' Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce . This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users' Guide [1] . The information herein is subject to change without notice. Copyright c 2002-2017 Sandia Corporation. All rights reserved. Trademarks Xyce TM Electronic Simulator and Xyce TM are trademarks of Sandia Corporation. Orcad, Orcad Capture, PSpice and Probe are registered trademarks of Cadence Design Systems, Inc. Microsoft, Windows and Windows 7 are registered trademarks of Microsoft Corporation. Medici, DaVinci and Taurus are registered trademarks of Synopsys Corporation. Amtec and TecPlot are trademarks of Amtec Engineering, Inc. All other trademarks are property of their respective owners. Contacts World Wide Web http://xyce.sandia.gov https://info.sandia.gov/xyce (Sandia only) Email xyce@sandia.gov (outside Sandia) xyce-sandia@sandia.gov (Sandia only) Bug Reports (Sandia only) http://joseki-vm.sandia.gov/bugzilla http://morannon.sandia.gov/bugzilla

Documentation of Cultural Heritage Objects

Directory of Open Access Journals (Sweden)

Jon Grobovšek

2013-09-01

Full Text Available EXTENDED ABSTRACT:The first and important phase of documentation of cultural heritage objects is to understand which objects need to be documented. The entire documentation process is determined by the characteristics and scope of the cultural heritage object. The next question to be considered is the expected outcome of the documentation process and the purpose for which it will be used. These two essential guidelines determine each stage of the documentation workflow: the choice of the most appropriate data capturing technology and data processing method, how detailed should the documentation be, what problems may occur, what the expected outcome is, what it will be used for, and the plan for storing data and results. Cultural heritage objects require diverse data capturing and data processing methods. It is important that even the first stages of raw data capturing are oriented towards the applicability of results. The selection of the appropriate working method can facilitate the data processing and the preparation of final documentation. Documentation of paintings requires different data capturing method than documentation of buildings or building areas. The purpose of documentation can also be the preservation of the contemporary cultural heritage to posterity or the basis for future projects and activities on threatened objects. Documentation procedures should be adapted to our needs and capabilities. Captured and unprocessed data are lost unless accompanied by additional analyses and interpretations. Information on tools, procedures and outcomes must be included into documentation. A thorough analysis of unprocessed but accessible documentation, if adequately stored and accompanied by additional information, enables us to gather useful data. In this way it is possible to upgrade the existing documentation and to avoid data duplication or unintentional misleading of users. The documentation should be archived safely and in a way to meet

THE MARK I BUSINESS SYSTEM SIMULATION MODEL

Science.gov (United States)

of a large-scale business simulation model as a vehicle for doing research in management controls. The major results of the program were the...development of the Mark I business simulation model and the Simulation Package (SIMPAC). SIMPAC is a method and set of programs facilitating the construction...of large simulation models. The object of this document is to describe the Mark I Corporation model, state why parts of the business were modeled as they were, and indicate the research applications of the model. (Author)

Documentation: Records and Reports.

Science.gov (United States)

Akers, Michael J

2017-01-01

This article deals with documentation to include the beginning of documentation, the requirements of Good Manufacturing Practice reports and records, and the steps that can be taken to minimize Good Manufacturing Practice documentation problems. It is important to remember that documentation for 503a compounding involves the Formulation Record, Compounding Record, Standard Operating Procedures, Safety Data Sheets, etc. For 503b outsourcing facilities, compliance with Current Good Manufacturing Practices is required, so this article is applicable to them. For 503a pharmacies, one can see the development and modification of Good Manufacturing Practice and even observe changes as they are occurring in 503a documentation requirements and anticipate that changes will probably continue to occur. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

Research and simulation

International Nuclear Information System (INIS)

Serres, M.; Klein, E.; Besnard, D.

2002-01-01

The scientific activity of old used to practice following two modes: the theory and the experiment. The last ten years saw the emergence of a third approach: the simulation. In this evolution the CEA played a major part, in particular to answer the need of the nuclear park and the nuclear disarmament. In this framework, the document presents the simulation activities of the CEA in many domains: the climate, the radioactive wastes management, the particles Physics, the biological macromolecules, the interfaces and surfaces, the nuclear reactors, the welding, the non destructive testing, the fusion. (A.L.B.)

Instructions for submittal and control of FFTF design documents and design related documentation

International Nuclear Information System (INIS)

Grush, R.E.

1976-10-01

This document provides the system and requirements for management of FFTF technical data prepared by Westinghouse Hanford (HEDL), and design contractors, the construction contractor and lower tier equipment suppliers. Included in this document are provisions for the review, approval, release, change control, and accounting of FFTF design disclosure and base documentation. Also included are provisions for submittal of other design related documents for review and approval consistent with applicable requirements of RDT-Standard F 2-2, ''Quality Assurance Program Requirements.''

Simulant Basis for the Standard High Solids Vessel Design

Energy Technology Data Exchange (ETDEWEB)

Peterson, Reid A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fiskum, Sandra K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Suffield, Sarah R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Daniel, Richard C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gauglitz, Phillip A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wells, Beric E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-09-01

This document provides the requirements for a test simulant suitable for demonstrating the mixing requirements for the Single High Solids Vessel Design (SHSVD). This simulant has not been evaluated for other purposes such as gas retention and release or erosion. The objective of this work is to provide an underpinning for the simulant properties based on actual waste characterization.

An introduction to enterprise modeling and simulation

Energy Technology Data Exchange (ETDEWEB)

Ostic, J.K.; Cannon, C.E. [Los Alamos National Lab., NM (United States). Technology Modeling and Analysis Group

1996-09-01

As part of an ongoing effort to continuously improve productivity, quality, and efficiency of both industry and Department of Energy enterprises, Los Alamos National Laboratory is investigating various manufacturing and business enterprise simulation methods. A number of enterprise simulation software models are being developed to enable engineering analysis of enterprise activities. In this document the authors define the scope of enterprise modeling and simulation efforts, and review recent work in enterprise simulation at Los Alamos National Laboratory as well as at other industrial, academic, and research institutions. References of enterprise modeling and simulation methods and a glossary of enterprise-related terms are provided.

Extended Subject Access to Hypertext Online Documentation. Part III: The Document-Boundaries Problem.

Science.gov (United States)

Girill, T. R.

1991-01-01

This article continues the description of DFT (Document, Find, Theseus), an online documentation system that provides computer-managed on-demand printing of software manuals as well as the interactive retrieval of reference passages. Document boundaries in the hypertext database are discussed, search vocabulary complexities are described, and text…

Learning in a landscape : Simulation-building as reflexive intervention

NARCIS (Netherlands)

Beaulieu, Anne; Ratto, Matt; Scharnhorst, Andrea

2013-01-01

This article makes a dual contribution to scholarship in science and technology studies (STS) on simulation-building. It both documents a specific simulation-building project, and demonstrates a concrete contribution to interdisciplinary work of STS insights. The article analyses the struggles that

Simulation of Floaters in Action

DEFF Research Database (Denmark)

Nielsen, Morten Eggert; Ulriksen, Martin Dalgaard; Damkilde, Lars

This report is the first in a series of three, which altogether documents: 1. theory 2. numerical implementation 3. application for Simulation of Floaters in Action (SOFIA), which is a structural analysis tool for slender offshore structures, such as monopiles, jacket structures and floating space...... frame structures. The current report represents the theoretical basis, while the numerical implementation and application of SOFIA are documented in two individual reports. In relation to other structural analysis tools, the present tool allows for geometrical nonlinearities, which may be exhibited...

A Collection of Nonlinear Aircraft Simulations in MATLAB

Science.gov (United States)

Garza, Frederico R.; Morelli, Eugene A.

2003-01-01

Nonlinear six degree-of-freedom simulations for a variety of aircraft were created using MATLAB. Data for aircraft geometry, aerodynamic characteristics, mass / inertia properties, and engine characteristics were obtained from open literature publications documenting wind tunnel experiments and flight tests. Each nonlinear simulation was implemented within a common framework in MATLAB, and includes an interface with another commercially-available program to read pilot inputs and produce a three-dimensional (3-D) display of the simulated airplane motion. Aircraft simulations include the General Dynamics F-16 Fighting Falcon, Convair F-106B Delta Dart, Grumman F-14 Tomcat, McDonnell Douglas F-4 Phantom, NASA Langley Free-Flying Aircraft for Sub-scale Experimental Research (FASER), NASA HL-20 Lifting Body, NASA / DARPA X-31 Enhanced Fighter Maneuverability Demonstrator, and the Vought A-7 Corsair II. All nonlinear simulations and 3-D displays run in real time in response to pilot inputs, using contemporary desktop personal computer hardware. The simulations can also be run in batch mode. Each nonlinear simulation includes the full nonlinear dynamics of the bare airframe, with a scaled direct connection from pilot inputs to control surface deflections to provide adequate pilot control. Since all the nonlinear simulations are implemented entirely in MATLAB, user-defined control laws can be added in a straightforward fashion, and the simulations are portable across various computing platforms. Routines for trim, linearization, and numerical integration are included. The general nonlinear simulation framework and the specifics for each particular aircraft are documented.

Synthesis document on the long life behavior of packages: reference operational document ''CSD-C'' 2004

International Nuclear Information System (INIS)

Helie, M.

2004-12-01

This document is realized in the framework of the law of 1991 on the radioactive wastes management. The 2004 synthesis document on long time behavior of standard packages of compacted wastes is constituted by two documents, the reference document and the operational document. This paper presents the operational model describing the packages alteration by the water and the associated radionuclide release. (A.L.B.)

CMS DOCUMENTATION

CERN Multimedia

CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted.   CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat a...

CMS DOCUMENTATION

CERN Multimedia

CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the natu...

CMS DOCUMENTATION

CERN Multimedia

CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the natur...

CMS DOCUMENTATION

CERN Multimedia

CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ Management- CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. Management - CB - MB - FB Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2007 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the nature of em¬pl...

CMS DOCUMENTATION

CERN Multimedia

CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ Management- CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. Management - CB - MB - FB Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2007 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the nature of employment and ...

CMS DOCUMENTATION

CERN Multimedia

CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the na...

Development and Characterization of Boehmite Component Simulant

Energy Technology Data Exchange (ETDEWEB)

Russell, Renee L.; Peterson, Reid A.; Smith, Harry D.; Rinehart, Donald E.; Aker, Pamela M.; Buck, Edgar C.

2009-03-10

According to Bechtel National Inc.’s (BNI’s) Test Specification 24590-PTF-TSP-RT-06-006, Rev 0, “Simulant Development to Support the Development and Demonstration of Leaching and Ultrafiltration Pretreatment Processes,” simulants for boehmite, gibbsite, and filtration are to be developed that can be used in subsequent bench and integrated testing of the leaching/filtration processes. These simulants will then be used to demonstrate the leaching process and to help refine processing conditions that may impact safety basis considerations (Smith 2006). This report documents the results of the boehmite simulant development.

76 FR 66311 - Draft Documents To Support Submission of an Electronic Common Technical Document; Availability

Science.gov (United States)

2011-10-26

...] Draft Documents To Support Submission of an Electronic Common Technical Document; Availability AGENCY... making regulatory submissions in electronic format using the electronic Common Technical Document (eCTD....S. regional document type definition, version 3.0) and ``Comprehensive Table of Contents Headings...

The Treaty of Naples. The closured of the Prince John Casimir and the Polish levy of Medina de las Torres (1638-1642 El Tratado de Nápoles. El encierro del príncipe JuanCasimiro y la leva de polacos de Medina de las Torres (1638-1642

Directory of Open Access Journals (Sweden)

Miguel Conde Pazos

2012-03-01

Full Text Available Throughout the seventeenth century, the Vasa of Poland and the Habsburg family established a series of contacts which would link to the Catholic Monarchy with the events in Eastern Europe. This article addresses a specific event of these relationships: the closure by the French of Prince Casimir on his way to Spain, and subse-quent negotiations between his half-brother, King Ladislaus IV, and the viceroy of Naples, the Duke of Medina de las Torres, to raise an army of punishment to free the prince. In this negotiation between Naples, Madrid, Vienna and Warsaw, the catholic king diplomacy interacted with leading personalities of the Polish court.Durante todo el siglo XVII los Vasa de Polonia y la familia Habsburgo establecieron una serie de contactos que vincularían a la Monarquía Católica con los acontecimientos de la Europa Oriental. El presente artículo trata un suceso concreto de estas relaciones: el encierro por parte de los franceses del príncipe Casimiro cuando se dirigía hacia España, y las ulteriores negociaciones entre su medio hermano, el rey Ladislao IV, y el virrey de Nápoles, el duque de Medina de las Torres, para levantar un ejército de castigo que liberara al príncipe. En esta negociación entre Nápoles, Madrid, Viena y Varsovia, la diplomacia del rey Católico interactuó con los más destacados personajes de la corte polaca.

Multitemporal analysis of Landsat images to detect land use land cover changes for monitoring soil sealing in the Nola area (Naples, Italy)

Science.gov (United States)

De Giglio, Michaela; Allocca, Maria; Franci, Francesca

2016-10-01

Land Use Land Cover Changes (LULCC) data provide objective information to support environmental policy, urban planning purposes and sustainable land development. Understanding of past land use/cover practices and current landscape patterns is critical to assess the effects of LULCC on the Earth system. Within the framework of soil sealing in Italy, the present study aims to assess the LULCC of the Nola area (Naples metropolitan area, Italy), relating to a thirty year period from 1984 to 2015. The urban sprawl affects this area causing the impervious surface increase, the loss in rural areas and landscape fragmentation. Located near Vesuvio volcano and crossed by artificial filled rivers, the study area is subject to landslide, hydraulic and volcanic risks. Landsat time series has been processed by means of the supervised per-pixel classification in order to produce multitemporal Land Use Land Cover maps. Then, post-classification comparison approach has been applied to quantify the changes occurring between 1984 and 2015, also analyzing the intermediate variations in 1999, namely every fifteen years. The results confirm the urban sprawl. The increase of the built-up areas mainly causes the habitat fragmentation and the agricultural land conversion of the Nola area that is already damaged by unauthorized disposal of urban waste. Moreover, considering the local risk maps, it was verified that some of the new urban areas were built over known hazardous sites. In order to limit the soil sealing, urgent measures and sustainable urban planning are required.

The Impact of Social and Cultural Engagement and Dieting on Well-Being and Resilience in a Group of Residents in the Metropolitan Area of Naples

Directory of Open Access Journals (Sweden)

Antonio Rapacciuolo

2016-01-01

Full Text Available Social isolation and exclusion are associated with poor health status and premature death. A number of related isolation factors, inadequate transportation system and restrictions in individuals’ life space, have been associated with malnutrition in older adults. Since eating is a social event, isolation can have a negative effect on nutrition. Cultural involvement and participation in interactive activities are essential tools to fight social isolation, and they can counteract the detrimental effects of social isolation on health. To provide data supporting the hypothesis that encouraging participation might represent an innovative preventive and health promoting strategy for healthy living and aging, we developed an ad hoc questionnaire to investigate the relationship between cultural participation, well-being, and resilience in a sample of residents in the metropolitan area of Naples. The questionnaire includes a question on adherence to diet or to a special nutritional regimen; in addition, the participants are asked to mention their height and weight. We investigated the relationship between BMI, adherence to diet, and perceived well-being (PWB and resilience in a sample of 571 subjects over 60 years of age. Here, we present evidence that engagement into social and cultural activities is associated with higher well-being and resilience, in particular in females over 60 years of age.

Electrical resistivity for detecting subsurface non-aqueous phase liquids: A progress report

International Nuclear Information System (INIS)

Lee, K.H.; Shan, C.; Javandel, I.

1995-06-01

Soils and groundwater have been contaminated by hazardous substances at many places in the United States and many other countries. The contaminants are commonly either petroleum products or industrial solvents with very low solubility in water. These contaminants are usually called non-aqueous phase liquids (NAPLs). The cost of cleaning up the affected sites in the United States is estimated to be of the order of 100 billion dollars. In spite of the expenditure of several billion dollars during the last 15 years, to date, very few, if any major contaminated site has been restored. The presence of NAPL pools in the subsurface is believed to be the main cause for the failure of previous cleanup activities. Due to their relatively low water solubility, and depending on their volume, it takes tens or even hundreds of years to deplete the NAPL sources if they are not removed from the subsurface. The intrinsic electrical resistivity of most NAPLs is typically in the range of 10 7 to 10 12 Ω-m, which is several orders of magnitude higher than that of groundwater containing dissolved solids (usually in the range of a few Ω-m to a few thousand Ω-m). Although a dry soil is very resistive, the electrical resistivity of a wet soil is on the order of 100 Ω-m and is dependent on the extent of water saturation. For a given soil, the electrical resistivity increases with decrease of water saturation. Therefore, if part of the pore water is replaced by a NAPL, the electrical resistivity will increase. At many NAPL sites, both the vadose and phreatic zones can be partially occupied by NAPL pools. It is the great contrast in electrical resistivity between the NAPLs and groundwater that may render the method to be effective in detecting subsurface NAPLs at contaminated sites. The following experiments were conducted to investigate the change of the electrical resistivity of porous media when diesel fuel (NAPL) replaces part of the water

FACT (Version 2.0) - Subsurface Flow and Contaminant Transport Documentation and User's Guide

Energy Technology Data Exchange (ETDEWEB)

Aleman, S.E.

2000-05-05

This report documents a finite element code designed to model subsurface flow and contaminant transport, named FACT. FACT is a transient three-dimensional, finite element code designed to simulate isothermal groundwater flow, moisture movement, and solute transport in variably saturated and fully saturated subsurface porous media.

Embedding the shapes of regions of interest into a Clinical Document Architecture document.

Science.gov (United States)

Minh, Nguyen Hai; Yi, Byoung-Kee; Kim, Il Kon; Song, Joon Hyun; Binh, Pham Viet

2015-03-01

Sharing a medical image visually annotated by a region of interest with a remotely located specialist for consultation is a good practice. It may, however, require a special-purpose (and most likely expensive) system to send and view them, which is an unfeasible solution in developing countries such as Vietnam. In this study, we design and implement interoperable methods based on the HL7 Clinical Document Architecture and the eXtensible Markup Language Stylesheet Language for Transformation standards to seamlessly exchange and visually present the shapes of regions of interest using web browsers. We also propose a new integration architecture for a Clinical Document Architecture generator that enables embedding of regions of interest and simultaneous auto-generation of corresponding style sheets. Using the Clinical Document Architecture document and style sheet, a sender can transmit clinical documents and medical images together with coordinate values of regions of interest to recipients. Recipients can easily view the documents and display embedded regions of interest by rendering them in their web browser of choice. © The Author(s) 2014.

Human Document Project

NARCIS (Netherlands)

de Vries, Jeroen; Abelmann, Leon; Manz, A; Elwenspoek, Michael Curt

2012-01-01

“The Human Document Project‿ is a project which tries to answer all of the questions related to preserving information about the human race for tens of generations of humans to come or maybe even for a future intelligence which can emerge in the coming thousands of years. This document mainly

Consumer Vehicle Choice Model Documentation

Energy Technology Data Exchange (ETDEWEB)

Liu, Changzheng [ORNL; Greene, David L [ORNL

2012-08-01

In response to the Fuel Economy and Greenhouse Gas (GHG) emissions standards, automobile manufacturers will need to adopt new technologies to improve the fuel economy of their vehicles and to reduce the overall GHG emissions of their fleets. The U.S. Environmental Protection Agency (EPA) has developed the Optimization Model for reducing GHGs from Automobiles (OMEGA) to estimate the costs and benefits of meeting GHG emission standards through different technology packages. However, the model does not simulate the impact that increased technology costs will have on vehicle sales or on consumer surplus. As the model documentation states, “While OMEGA incorporates functions which generally minimize the cost of meeting a specified carbon dioxide (CO2) target, it is not an economic simulation model which adjusts vehicle sales in response to the cost of the technology added to each vehicle.” Changes in the mix of vehicles sold, caused by the costs and benefits of added fuel economy technologies, could make it easier or more difficult for manufacturers to meet fuel economy and emissions standards, and impacts on consumer surplus could raise the costs or augment the benefits of the standards. Because the OMEGA model does not presently estimate such impacts, the EPA is investigating the feasibility of developing an adjunct to the OMEGA model to make such estimates. This project is an effort to develop and test a candidate model. The project statement of work spells out the key functional requirements for the new model.

From light polarization to the basic ideas of Quantum Mechanics. Experience carried out in a Technical Institute in Scampia (Naples)

International Nuclear Information System (INIS)

Moretti, M.

2014-01-01

The article focuses on teaching/learning Quantum Mechanics (QM) in secondary schools and involves two fundamental aspects: teacher training and experimentation in the classroom, carefully reflecting on the content and highlighting innovation in the teaching methodology. The experience of training took place within a second level post-graduate Master course for Physics teachers (The II level post-graduate Master course in Didactic Innovation in Physics and Guidance (Innovazione Didattica in Fisica e Orientamento IDIFO) http://www.fisica.uniud.it/ URDF/laurea/index.htm) is directed by M. Michelini. The University of Udine organizes the course with the collaboration of the Physiscs Education Research Groups of eighteen Italian Universities, and is a part of a training project addressed to physics teachers focused on modern physics. IDIFO is part of a national plan of the Ministry of Education, Research and University for the Scientific Degrees project (Piano Lauree Scientifiche)), based on a module dedicated to teaching/learning QM according to the fundamental concepts of Dirac theory. The teacher achieved formation attending three e-learning courses about teaching/learning quantum mechanics in secondary schools, researching and discussing research materials of physics education, planning an intervention module and experimenting in a real classroom the planned innovative path for a situated formation. The experimentation, carried out in a fifth class of a Technical Institute at Scampia (Naples), made the conclusive phase and gave data concerning the thinking ways of the students about some basic concepts of QM collected and evaluated. In particular, average students focused more the functional/applicative aspects of formal and conceptual constructs rather than on their physical meanings.

Diagnostic analysis of stone materials from underwater excavations: the case study of the Roman archaeological site of Baia (Naples, Italy)

Energy Technology Data Exchange (ETDEWEB)

Aloise, P.; Ricca, M.; La Russa, M.F.; Ruffolo, S.A.; Crisci, G.M. [Universita della Calabria, Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), Arcavacata di Rende (Italy); Belfiore, C.M. [Universita della Calabria, Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), Arcavacata di Rende (Italy); Universita di Catania, Dipartimento di Scienze Biologiche, Geologiche e Ambientali - Sezione di Scienze della Terra, Catania (Italy); Padeletti, G. [CNR-ICMAT, Roma (Italy)

2014-03-15

This work belongs to the framework of the national research project ''COMAS'' (Planned COnservation, ''in situ'', of underwater archaeological artifacts), funded by the Italian Ministry of Education, Universities and Research (MIUR), concerning the submarine archaeological area of Baia (Naples, Italy). The site includes remains of the ancient cities of Baiae and Portus Iulius, which, since the 4th century AD, started to be submerged because of the bradyseism phenomenon. The work aims to the characterization of four different types of stone materials collected from the site, specifically marbles, limestones, ignimbrites, and bricks, in order to investigate their state of conservation. In particular, specimens were sampled from some masonry structures and pavement slabs (opus sectile) in a specific area of the submerged site, called ''Villa a Protiro''. In order to characterize archaeological samples from a mineralogical-petrographic point of view, polarized optical microscopy and X-ray diffraction analyses were carried out, while to assess their conservation state, the surface colonization by biodeteriogen agents and their interaction with the substrate were studied through observations under a stereomicroscope, scanning electron microscopy and Fourier transform infrared spectroscopy. Marble and limestone samples revealed an intense bioerosion phenomena, attributable to epilithic and endolithic forms, particularly boring sponges. On the contrary, ignimbrites suffer a lower degree of biological colonization related to the activity of other species, such as serpulids and bryozoans. In bricks, biocolonisation is correlated to the type of temper used in the artifact, the quartz pastes having a greater susceptibility to biological attack than the volcanic ones. (orig.)

LCS Content Document Application

Science.gov (United States)

Hochstadt, Jake

2011-01-01

My project at KSC during my spring 2011 internship was to develop a Ruby on Rails application to manage Content Documents..A Content Document is a collection of documents and information that describes what software is installed on a Launch Control System Computer. It's important for us to make sure the tools we use everyday are secure, up-to-date, and properly licensed. Previously, keeping track of the information was done by Excel and Word files between different personnel. The goal of the new application is to be able to manage and access the Content Documents through a single database backed web application. Our LCS team will benefit greatly with this app. Admin's will be able to login securely to keep track and update the software installed on each computer in a timely manner. We also included exportability such as attaching additional documents that can be downloaded from the web application. The finished application will ease the process of managing Content Documents while streamlining the procedure. Ruby on Rails is a very powerful programming language and I am grateful to have the opportunity to build this application.

Foreign patent documentation and information research

International Nuclear Information System (INIS)

Wang Tongsheng; Wu Xianfeng; Liu Jia; Cao Jifen; Song Tianbao; Feng Beiyuan; Zhang Baozhu

2014-01-01

Patent documentations are important scientific and technical documentations, which gather legal information, technical information and economic information together. According to WIPO forecasts, making full use of patent documentation can save 40% of research funding and 60% of the study period. Foreign patent documentations are the world's most valuable patent documentations, and many original technologies that have significant influence are first disclosed in foreign patent documentation. Studying and making use of foreign patent documentations can improve our starting point of scientific and technological innovation, and reduce the research investment. This paper analyzes foreign patent documentation and, combining with the actual development of nuclear technology in our country, makes specific recommendations for patent documentation research. (authors)

La Documentation photographique

Directory of Open Access Journals (Sweden)

Magali Hamm

2009-03-01

Full Text Available La Documentation photographique, revue destinée aux enseignants et étudiants en histoire-géographie, place l’image au cœur de sa ligne éditoriale. Afin de suivre les évolutions actuelles de la géographie, la collection propose une iconographie de plus en plus diversifiée : cartes, photographies, mais aussi caricatures, une de journal ou publicité, toutes étant considérées comme un document géographique à part entière. Car l’image peut se faire synthèse ; elle peut au contraire montrer les différentes facettes d’un objet ; souvent elle permet d’incarner des phénomènes géographiques. Associées à d’autres documents, les images aident les enseignants à initier leurs élèves à des raisonnements géographiques complexes. Mais pour apprendre à les lire, il est fondamental de les contextualiser, de les commenter et d’interroger leur rapport au réel.The Documentation photographique, magazine dedicated to teachers and students in History - Geography, places the image at the heart of its editorial line. In order to follow the evolutions of Geography, the collection presents a more and more diversified iconography: maps, photographs, but also drawings or advertisements, all this documents being considered as geographical ones. Because image can be a synthesis; on the contrary it can present the different facets of a same object; often it enables to portray geographical phenomena. Related to other documents, images assist the teachers in the students’ initiation to complex geographical reasoning. But in order to learn how to read them, it is fundamental to contextualize them, comment them and question their relations with reality.

Multiple sclerosis documentation system (MSDS): moving from documentation to management of MS patients.

Science.gov (United States)

Ziemssen, Tjalf; Kempcke, Raimar; Eulitz, Marco; Großmann, Lars; Suhrbier, Alexander; Thomas, Katja; Schultheiss, Thorsten

2013-09-01

The long disease duration of multiple sclerosis and the increasing therapeutic options require a individualized therapeutic approach which should be carefully documented over years of observation. To switch from MS documentation to an innovative MS management, new computer- and internet-based tools could be implemented as we could demonstrate with the novel computer-based patient management system "multiple sclerosis management system 3D" (MSDS 3D). MSDS 3D allows documentation and management of visit schedules and mandatory examinations via defined study modules by integration of data input from various sources (patients, attending physicians and MS nurses). It provides forms for the documentation of patient visits as well as clinical and diagnostic findings. Information can be collected via interactive touch screens. Specific modules allow the management of highly efficacious treatments as natalizumab or fingolimod. MSDS can be used to transfer the documented data to databases as, e.g. the registry of the German MS society or REGIMS. MSDS has already been implemented successfully in clinical practice and is currently being evaluated in a multicenter setting. High-quality management and documentation are crucial for improvements in clinical practice and research work.

Design of simulation builder software to support the enterprise modeling and simulation task of the AMTEX program

Energy Technology Data Exchange (ETDEWEB)

Nolan, M.; Lamont, A.; Chang, L.

1995-12-12

This document describes the implementation of the Simulation Builder developed as part of the Enterprise Modeling and Simulation (EM&S) portion of the Demand Activated Manufacturing Architecture (DAMA) project. The Simulation Builder software allows users to develop simulation models using pre-defined modules from a library. The Simulation Builder provides the machinery to allow the modules to link together and communicate information during the simulation run. This report describes the basic capabilities and structure of the Simulation Builder to assist a user in reviewing and using the code. It also describes the basic steps to follow when developing modules to take advantage of the capabilities provided by the Simulation Builder. The Simulation Builder software is written in C++. The discussion in this report assumes a sound understanding of the C++ language. Although this report describes the steps to follow when using the Simulation Builder, it is not intended to be a tutorial for a user unfamiliar with C++.

Registration document 2005; Document de reference 2005

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This reference document of Gaz de France provides information and data on the Group activities in 2005: financial informations, business, activities, equipments factories and real estate, trade, capital, organization charts, employment, contracts and research programs. (A.L.B.)

Massively parallel multicanonical simulations

Science.gov (United States)

Gross, Jonathan; Zierenberg, Johannes; Weigel, Martin; Janke, Wolfhard

2018-03-01

Generalized-ensemble Monte Carlo simulations such as the multicanonical method and similar techniques are among the most efficient approaches for simulations of systems undergoing discontinuous phase transitions or with rugged free-energy landscapes. As Markov chain methods, they are inherently serial computationally. It was demonstrated recently, however, that a combination of independent simulations that communicate weight updates at variable intervals allows for the efficient utilization of parallel computational resources for multicanonical simulations. Implementing this approach for the many-thread architecture provided by current generations of graphics processing units (GPUs), we show how it can be efficiently employed with of the order of 104 parallel walkers and beyond, thus constituting a versatile tool for Monte Carlo simulations in the era of massively parallel computing. We provide the fully documented source code for the approach applied to the paradigmatic example of the two-dimensional Ising model as starting point and reference for practitioners in the field.

Documentation design for probabilistic risk assessment

International Nuclear Information System (INIS)

Parkinson, W.J.; von Herrmann, J.L.

1985-01-01

This paper describes a framework for documentation design of probabilistic risk assessment (PRA) and is based on the EPRI document NP-3470 ''Documentation Design for Probabilistic Risk Assessment''. The goals for PRA documentation are stated. Four audiences are identified which PRA documentation must satisfy, and the documentation consistent with the needs of the various audiences are discussed, i.e., the Summary Report, the Executive Summary, the Main Report, and Appendices. The authors recommend the documentation specifications discussed herein as guides rather than rigid definitions

Multimodal document management in radiotherapy

International Nuclear Information System (INIS)

Fahrner, H.; Kirrmann, S.; Roehner, F.; Schmucker, M.; Hall, M.; Heinemann, F.

2013-01-01

Background and purpose: After incorporating treatment planning and the organisational model of treatment planning in the operating schedule system (BAS, 'Betriebsablaufsystem'), complete document qualities were embedded in the digital environment. The aim of this project was to integrate all documents independent of their source (paper-bound or digital) and to make content from the BAS available in a structured manner. As many workflow steps as possible should be automated, e.g. assigning a document to a patient in the BAS. Additionally it must be guaranteed that at all times it could be traced who, when, how and from which source documents were imported into the departmental system. Furthermore work procedures should be changed that the documentation conducted either directly in the departmental system or from external systems can be incorporated digitally and paper document can be completely avoided (e.g. documents such as treatment certificate, treatment plans or documentation). It was a further aim, if possible, to automate the removal of paper documents from the departmental work flow, or even to make such paper documents superfluous. In this way patient letters for follow-up appointments should automatically generated from the BAS. Similarly patient record extracts in the form of PDF files should be enabled, e.g. for controlling purposes. Method: The available document qualities were analysed in detail by a multidisciplinary working group (BAS-AG) and after this examination and assessment of the possibility of modelling in our departmental workflow (BAS) they were transcribed into a flow diagram. The gathered specifications were implemented in a test environment by the clinical and administrative IT group of the department of radiation oncology and subsequent to a detailed analysis introduced into clinical routine. Results: The department has succeeded under the conditions of the aforementioned criteria to embed all relevant documents in the departmental

Development and Characterization of Gibbsite Component Simulant

International Nuclear Information System (INIS)

Russell, Renee L.; Smith, Harry D.; Rinehart, Donald E.; Peterson, Reid A.

2009-01-01

According to Bechtel National, Inc.'s (BNI's) Test Specification 24590-PTF-TSP-RT-06-006,, 'Simulant Development to Support the Development and Demonstration of Leaching and Ultrafiltration Pretreatment Processes', simulants for boehmite, gibbsite, and filtration are to be developed so they can be used in subsequent bench and integrated testing of the leaching/filtration processes for the River Protection Project-Waste Treatment and Immobilization Plant (RPP-WTP). These simulants will then be used to demonstrate the leaching process and to help refine processing conditions that may impact safety basis considerations (Smith 2006). This report documents PNNL's results of the gibbsite simulant development.

Scheme Program Documentation Tools

DEFF Research Database (Denmark)

Nørmark, Kurt

2004-01-01

are separate and intended for different documentation purposes they are related to each other in several ways. Both tools are based on XML languages for tool setup and for documentation authoring. In addition, both tools rely on the LAML framework which---in a systematic way---makes an XML language available...... as named functions in Scheme. Finally, the Scheme Elucidator is able to integrate SchemeDoc resources as part of an internal documentation resource....

Graphical Interfaces for Simulation.

Science.gov (United States)

Hollan, J. D.; And Others

This document presents a discussion of the development of a set of software tools to assist in the construction of interfaces to simulations and real-time systems. Presuppositions to the approach to interface design that was used are surveyed, the tools are described, and the conclusions drawn from these experiences in graphical interface design…

Pretest analysis document for Test S-FS-11

International Nuclear Information System (INIS)

Hall, D.G.; Shaw, R.A.

1985-07-01

This report documents the pretest calculations completed for Semiscale Test S-FS-11. This test will simulate a transient initiated by a 50% break in a steam generator bottom feedwater line downstream of the check valve. The initial conditions represents normal operating conditions for a C-E System 80 nuclear plant. Prediction of transients resulting from feedwater line breaks in these plants have indicated that significant primary system overpressurization may occur. The results of a RELAP5/MOD2/CY21 code calculation indicate that the test objectives for Test S-FS-11 can be achieved. The primary system overpressurization will occur but pose no threat to personnel or plant integrity. 3 refs., 15 figs., 5 tabs

Engineering Documentation and Data Control

Science.gov (United States)

Matteson, Michael J.; Bramley, Craig; Ciaruffoli, Veronica

2001-01-01

Mississippi Space Services (MSS) the facility services contractor for NASA's John C. Stennis Space Center (SSC), is utilizing technology to improve engineering documentation and data control. Two identified improvement areas, labor intensive documentation research and outdated drafting standards, were targeted as top priority. MSS selected AutoManager(R) WorkFlow from Cyco software to manage engineering documentation. The software is currently installed on over 150 desctops. The outdated SSC drafting standard was written for pre-CADD drafting methods, in other words, board drafting. Implementation of COTS software solutions to manage engineering documentation and update the drafting standard resulted in significant increases in productivity by reducing the time spent searching for documents.

On the presence of the Mediterranean endemic Microdeutopus sporadhi Myers, 1969 (Crustacea: Amphipoda: Aoridae in the Gulf of Naples (Italy with a review on its distribution and ecology

Directory of Open Access Journals (Sweden)

M. B. SCIPIONE

2013-10-01

Full Text Available The species Microdeutopus sporadhi (Crustacea: Amphipoda: Aoridae, endemic of the Mediterranean Sea, was described by Myers in 1969 on material collected from the Aegean Sea in a sheltered environment with high sedimentation rates. A check on the distribution and ecology of M. sporadhi showed that: — although not mentioned in the checklist of amphipods of the Italian seas, it was already found in the central Tyrrhenian Sea in 1983-84 and in the northern Adriatic Sea in 2002-03; — it was rarely found in the Mediterranean Sea, one of the most studied basins as concerns amphipod fauna; but notwithstanding the few records available, the wide ecological spectrum of this species was pointed out. The present study, conducted off the Island of Ischia (Gulf of Naples, Italy, showed the presence of rich and well established populations through time, but only in a peculiar substratum (artificial collectors and environment (low pH values. The species seems to be able to withstand harsh environmental conditions and probably to conceal itself through a cryptic behaviour, escaping traditional sampling methods. The role of rare or hidden species in bio-assessment should be re-evaluated.

Affordances and Limitations of Immersive Participatory Augmented Reality Simulations for Teaching and Learning

Science.gov (United States)

Dunleavy, Matt; Dede, Chris; Mitchell, Rebecca

2009-02-01

The purpose of this study was to document how teachers and students describe and comprehend the ways in which participating in an augmented reality (AR) simulation aids or hinders teaching and learning. Like the multi-user virtual environment (MUVE) interface that underlies Internet games, AR is a good medium for immersive collaborative simulation, but has different strengths and limitations than MUVEs. Within a design-based research project, the researchers conducted multiple qualitative case studies across two middle schools (6th and 7th grade) and one high school (10th grade) in the northeastern United States to document the affordances and limitations of AR simulations from the student and teacher perspective. The researchers collected data through formal and informal interviews, direct observations, web site posts, and site documents. Teachers and students reported that the technology-mediated narrative and the interactive, situated, collaborative problem solving affordances of the AR simulation were highly engaging, especially among students who had previously presented behavioral and academic challenges for the teachers. However, while the AR simulation provided potentially transformative added value, it simultaneously presented unique technological, managerial, and cognitive challenges to teaching and learning.

Comparison of historical documents for writership

Science.gov (United States)

Ball, Gregory R.; Pu, Danjun; Stritmatter, Roger; Srihari, Sargur N.

2010-01-01

Over the last century forensic document science has developed progressively more sophisticated pattern recognition methodologies for ascertaining the authorship of disputed documents. These include advances not only in computer assisted stylometrics, but forensic handwriting analysis. We present a writer verification method and an evaluation of an actual historical document written by an unknown writer. The questioned document is compared against two known handwriting samples of Herman Melville, a 19th century American author who has been hypothesized to be the writer of this document. The comparison led to a high confidence result that the questioned document was written by the same writer as the known documents. Such methodology can be applied to many such questioned documents in historical writing, both in literary and legal fields.

Joint Simulation System (JSIMS) Functional Requirements Document (FRD); A User's Perspective on the Future, Version 1.O

National Research Council Canada - National Science Library

1996-01-01

The purpose of this document is to define JSIMS functional requirements in a level of detail that is meaningful to both the JSIMS developmental community and the expected future users of the system...

Documentation of spectrom-32

International Nuclear Information System (INIS)

Callahan, G.D.; Fossum, A.F.; Svalstad, D.K.

1989-01-01

SPECTROM-32 is a finite element program for analyzing two-dimensional and axisymmetric inelastic thermomechanical problems related to the geological disposal of nuclear waste. The code is part of the SPECTROM series of special-purpose computer programs that are being developed by RE/SPEC Inc. to address many unique rock mechanics problems encountered in analyzing radioactive wastes stored in geologic formations. This document presents the theoretical basis for the mathematical models, the finite element formulation and solution procedure of the program, a description of the input data for the program, verification problems, and details about program support and continuing documentation. The computer code documentation is intended to satisfy the requirements and guidelines outlined in the document entitled Final Technical Position on Documentation of Computer Codes for High-Level Waste Management. The principal component models used in the program involve thermoelastic, thermoviscoelastic, thermoelastic-plastic, and thermoviscoplastic types of material behavior. Special material considerations provide for the incorporation of limited-tension material behavior and consideration of jointed material behavior. Numerous program options provide the capabilities for various boundary conditions, sliding interfaces, excavation, backfill, arbitrary initial stresses, multiple material domains, load incrementation, plotting database storage and access of results, and other features unique to the geologic disposal of radioactive wastes. Numerous verification problems that exercise many of the program options and illustrate the required data input and printed results are included in the documentation

Water Clarity Simulant for K East Basin Filtration Testing

Energy Technology Data Exchange (ETDEWEB)

Schmidt, Andrew J.

2006-01-20

This document provides a simulant formulation intended to mimic the behavior of the suspended solids in the K East (KE) Basin fuel storage pool. The simulant will be used to evaluate alternative filtration apparatus to improve Basin water clarity and to possibly replace the existing sandfilter. The simulant was formulated based on the simulant objectives, the key identified parameters important to filtration, the composition and character of the KE Basin suspended sludge particles, and consideration of properties of surrogate materials.

Flight test techniques for validating simulated nuclear electromagnetic pulse aircraft responses

Science.gov (United States)

Winebarger, R. M.; Neely, W. R., Jr.

1984-01-01

An attempt has been made to determine the effects of nuclear EM pulses (NEMPs) on aircraft systems, using a highly instrumented NASA F-106B to document the simulated NEMP environment at the Kirtland Air Force Base's Vertically Polarized Dipole test facility. Several test positions were selected so that aircraft orientation relative to the test facility would be the same in flight as when on the stationary dielectric stand, in order to validate the dielectric stand's use in flight configuration simulations. Attention is given to the flight test portions of the documentation program.

Simulation Data Management - Requirements and Design Specification

Energy Technology Data Exchange (ETDEWEB)

Clay, Robert L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Friedman-Hill, Ernest J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gibson, Marcus J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hoffman, Edward L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Olson, Kevin H. [Science Applications International Corporation (SAIC), Reston, VA (United States); Laney, Daniel [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-11-01

Simulation Data Management (SDM), the ability to securely organize, archive, and share analysis models and the artifacts used to create them, is a fundamental requirement for modern engineering analysis based on computational simulation. We have worked separately to provide secure, network SDM services to engineers and scientists at our respective laboratories for over a decade. We propose to leverage our experience and lessons learned to help develop and deploy a next-generation SDM service as part of a multi-laboratory team. This service will be portable across multiple sites and platforms, and will be accessible via a range of command-line tools and well-documented APIs. In this document, we’ll review our high-level and low-level requirements for such a system, review one existing system, and briefly discuss our proposed implementation.

Transportation System Requirements Document

International Nuclear Information System (INIS)

1993-09-01

This Transportation System Requirements Document (Trans-SRD) describes the functions to be performed by and the technical requirements for the Transportation System to transport spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from Purchaser and Producer sites to a Civilian Radioactive Waste Management System (CRWMS) site, and between CRWMS sites. The purpose of this document is to define the system-level requirements for Transportation consistent with the CRWMS Requirement Document (CRD). These requirements include design and operations requirements to the extent they impact on the development of the physical segments of Transportation. The document also presents an overall description of Transportation, its functions, its segments, and the requirements allocated to the segments and the system-level interfaces with Transportation. The interface identification and description are published in the CRWMS Interface Specification

Applications for electronic documents

International Nuclear Information System (INIS)

Beitel, G.A.

1995-01-01

This paper discusses the application of electronic media to documents, specifically Safety Analysis Reports (SARs), prepared for Environmental Restoration and Waste Management (ER ampersand WM) programs being conducted for the Department of Energy (DOE) at the Idaho National Engineering Laboratory (INEL). Efforts are underway to upgrade our document system using electronic format. To satisfy external requirements (DOE, State, and Federal), ER ampersand WM programs generate a complement of internal requirements documents including a SAR and Technical Safety Requirements along with procedures and training materials. Of interest, is the volume of information and the difficulty in handling it. A recently prepared ER ampersand WM SAR consists of 1,000 pages of text and graphics; supporting references add 10,000 pages. Other programmatic requirements documents consist of an estimated 5,000 pages plus references

The Vicinity of Program Documentation Tools

DEFF Research Database (Denmark)

Nørmark, Kurt

between program development tools.  In the central part of the paper we introduce a mapping of documentation flow between program development tools.  In addition we discuss a set of locally developed tools which is related to program documentation.  The use of test cases as examples in an interface......Program documentation plays a vital role in almost all programming processes.  Program documentation flows between separate tools of a modularized environment, and in between the components of an integrated development environment as well.  In this paper we discuss the flow of program documentation...... documentation tool is a noteworthy and valuable contribution to the documentation flow.  As an additional contribution we identify several circular relationships which illustrate feedback of documentation to the program editor from other tools in the development environment....

Forensic document analysis using scanning microscopy

Science.gov (United States)

Shaffer, Douglas K.

2009-05-01

The authentication and identification of the source of a printed document(s) can be important in forensic investigations involving a wide range of fraudulent materials, including counterfeit currency, travel and identity documents, business and personal checks, money orders, prescription labels, travelers checks, medical records, financial documents and threatening correspondence. The physical and chemical characterization of document materials - including paper, writing inks and printed media - is becoming increasingly relevant for law enforcement agencies, with the availability of a wide variety of sophisticated commercial printers and copiers which are capable of producing fraudulent documents of extremely high print quality, rendering these difficult to distinguish from genuine documents. This paper describes various applications and analytical methodologies using scanning electron miscoscopy/energy dispersive (x-ray) spectroscopy (SEM/EDS) and related technologies for the characterization of fraudulent documents, and illustrates how their morphological and chemical profiles can be compared to (1) authenticate and (2) link forensic documents with a common source(s) in their production history.

Improving collaborative documentation in CMS

International Nuclear Information System (INIS)

Lassila-Perini, Kati; Salmi, Leena

2010-01-01

Complete and up-to-date documentation is essential for efficient data analysis in a large and complex collaboration like CMS. Good documentation reduces the time spent in problem solving for users and software developers. The scientists in our research environment do not necessarily have the interests or skills of professional technical writers. This results in inconsistencies in the documentation. To improve the quality, we have started a multidisciplinary project involving CMS user support and expertise in technical communication from the University of Turku, Finland. In this paper, we present possible approaches to study the usability of the documentation, for instance, usability tests conducted recently for the CMS software and computing user documentation.

Effect of non-aqueous phase liquid on biodegradation of PAHs in spilled oil on tidal flat

International Nuclear Information System (INIS)

Kose, T.; Miyagishi, A.; Mukai, T.; Takimoto, K.; Okada, M.

2003-01-01

Biodegradation rates of polycyclic aromatic hydrocarbons (PAHs) in spilled oil stranded on tidal flats were studied using model reactors to clarify the effects of NAPL on the biodegradation of PAHs in stranded oil on tidal flat with special emphasis on the relationship between dissolution rates of PAHs into water and viscosity of NAPL. Biodegradation of PAHs in NAPL was limited by the dissolution rates of PAHs into water. Biodegradation rate of chrysene was smaller than that for acenaphthene and phenanthrene due to the smaller dissolution rates. Dissolution rates of PAHs in fuel oil C were smaller than those in crude oil due to high viscosity of fuel oil C. Therefore, biodegradation rates of PAHs in fuel oil C were smaller than those in crude oil. Biodegradation rates of PAHs in NAPL with slow decrease rate like fuel oil C were slower than those in NAPL with rapid decrease like crude oil. The smaller decrease rate of fuel oil C than crude oil was due to higher viscosity of fuel oil C. Therefore, not only the dissolution rate of PAHs but also the decrease rates of NAPL were important factors for the biodegradation of PAHs. (author)

Sandia Software Guidelines, Volume 2. Documentation

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standards for software documentation, this volume provides guidance in the selection of an adequate document set for a software project and example formats for many types of software documentation. A tutorial on life cycle documentation is also provided. Extended document thematic outlines and working examples of software documents are available on electronic media as an extension of this volume.

Recommended HSE-7 documents hierarchy

International Nuclear Information System (INIS)

Klein, R.B.; Jennrich, E.A.; Lund, D.M.; Danna, J.G.; Davis, K.D.; Rutz, A.C.

1990-01-01

This report recommends a hierarchy of waste management documents at Los Alamos National Laboratory (LANL or ''Laboratory''). The hierarchy addresses documents that are required to plan, implement, and document waste management programs at Los Alamos. These documents will enable the waste management group and the six sections contained within that group to satisfy requirements that are imposed upon them by the US Department of Energy (DOE), DOE Albuquerque Operations, US Environmental Protection Agency, various State of New Mexico agencies, and Laboratory management

Documentation of torture victims, assessment of the start procedure for medico-legal documentation.

Science.gov (United States)

Mandel, Lene; Worm, Lise

2007-01-01

A Pilot Study was performed at the Rehabilitation and Research Centre for Torture Victims (RCT) in Copenhagen in order to explore the possibilities for adding a medico-legal documentation component to the rehabilitation of torture victims already taking place. It describes the process and results on implementing medico-legal documentation in a rehabilitative setting. A modified version of the Guidelines in the Istanbul Protocol was developed on the basis of the review of literature and current practices described in "Documentation of torture victims, implementation of medico-legal protocols". The modified guidelines were tested on five clients. The aim was twofold: 1) To assess the client's attitude towards the idea of adding a documentation component to the rehabilitation process and: 2) To assess the practical circumstances of implementing the Istanbul Protocol in the everyday life of a rehabilitation centre. Results show that all five clients were positive towards the project and found comfort in being able to contribute to the fight against impunity. Also, the Pilot Study demonstrated that a large part of the medico-legal documentation was already obtained in the rehabilitation process. It was however not accessible due to lack of systematization and a data registering system. There are thus important synergies in collecting data for rehabilitation and documentation but a joint database system is necessary to realize these synergies.

Time domain reflectometry-measuring dielectric permittivity to detect soil non-acqeous phase liquids contamination-decontamination processes

Directory of Open Access Journals (Sweden)

A. Comegna

2013-09-01

Full Text Available Contamination of soils with non-aqueous phase liquids (NAPL constitutes a serious geo-environmental problem, given the toxicity level and high mobility of these organic compounds. To develop effective decontamination methods, characterisation and identification of contaminated soils are needed. The objective of this work is to explore the potential of dielectric permittivity measurements to detect the presence of NAPLs in soils. The dielectric permittivity was measured by Time Domain Reflectometry method (TDR in soil samples with either different volumetric content of water (w and NAPL (NAPL or at different stages during immiscible displacement test carried out with two different flushing solutions. A mixing model proposed by Francisca and Montoro, was calibrated to estimate the volume fraction of contaminant present in soil. Obtained results, showed that soil contamination with NAPL and the monitoring of immiscible fluid displacement, during soil remediation processes, can be clearly identified from dielectric measurements.

TRANSPORTATION SYSTEM REQUIREMENTS DOCUMENT

International Nuclear Information System (INIS)

2004-01-01

This document establishes the Transportation system requirements for the U.S. Department of Energy's (DOE's) Civilian Radioactive Waste Management System (CRWMS). These requirements are derived from the Civilian Radioactive Waste Management System Requirements Document (CRD). The Transportation System Requirements Document (TSRD) was developed in accordance with LP-3.1Q-OCRWM, Preparation, Review, and Approval of Office of National Transportation Level-2 Baseline Requirements. As illustrated in Figure 1, the TSRD forms a part of the DOE Office of Civilian Radioactive Waste Management (OCRWM) Technical Baseline

Design and dynamic simulation of a novel polygeneration system fed by vegetable oil and by solar energy

International Nuclear Information System (INIS)

Calise, Francesco; Palombo, Adolfo; Vanoli, Laura

2012-01-01

Highlights: ► A novel polygeneration system based on engines (RE) fed by rapeseed oil is investigated. ► RE are integrated with high temperature solar heating and cooling systems. ► The polygeneration system is dynamically investigated for a Mediterranean Climate. ► System performance is excellent from the energetic point of view. ► The system is economically profitable only in case of feed-in tariffs. - Abstract: In this paper the integration of vegetable oil-fed reciprocating engines with solar thermal collector is investigated, seeking to design a novel polygeneration system producing: electricity, space heating and cooling and domestic hot water, for a university building located in Naples (Italy), assumed as case study. The polygeneration system is based on the following main components: concentrating parabolic trough solar collector, double-stage LiBr–H 2 O absorption chiller and a reciprocating engine fed by vegetable oil. The engine operates at full load producing electrical energy which is in part consumed by the building lights and equipments, in part used by the system passive loads and the rest is eventually sold to the grid. In fact, the engine is grid connected in order to perform a convenient net metering. The system was designed and then simulated by means of a zero-dimensional transient simulation model, developed using the TRNSYS software. The simulation tool developed by the authors allows one to analyze the results for different time basis (minutes, days, weeks, months and years), from both energetic and economic points of view. The economic results show that the system under investigation is profitable, especially if properly funded.

[Models for quantification of fluid saturation in two-phase flow system by light transmission method and its application].

Science.gov (United States)

Zhang, Yan-Hong; Ye, Shu-Jun; Wu, Ji-Chun

2014-06-01

Based on light transmission method in quantification of liquid saturation and its application in two-phase flow system, two groups of sandbox experiments were set up to study the migration of gas or Dense Non-Aqueous Phase Liquids (DNAPLs) in water saturated porous media. The migration of gas or DNAPL was monitored in the study. Two modified Light Intensity-Saturation (LIS) models for water/gas two-phase system were applied and verified by the experiment data. Moreover two new LIS models for NAPL/water system were developed and applied to simulate the DNAPL infiltration experiment data. The gas injection experiment showed that gas moved upward to the top of the sandbox in the form of 'fingering' and finally formed continuous distribution. The results of DNAPL infiltration experiment showed that TCE mainly moved downward as the result of its gravity, eventually formed irregular plume and accumulated at the bottom of the sandbox. The outcomes of two LIS models for water/gas system (WG-A and WG-B) were consistent to the measured data. The results of two LIS models for NAPL/water system (NW-A and NW-B) fit well with the observations, and Model NW-A based on assumption of individual drainage gave better results. It could be a useful reference for quantification of NAPL/water saturation in porous media system.

Advanced distributed simulation technology: Digital Voice Gateway Reference Guide

Science.gov (United States)

Vanhook, Dan; Stadler, Ed

1994-01-01

The Digital Voice Gateway (referred to as the 'DVG' in this document) transmits and receives four full duplex encoded speech channels over the Ethernet. The information in this document applies only to DVG's running firmware of the version listed on the title page. This document, previously named Digital Voice Gateway Reference Guide, BBN Systems and Technologies Corporation, Cambridge, MA 02138, was revised for revision 2.00. This new revision changes the network protocol used by the DVG, to comply with the SINCGARS radio simulation (For SIMNET 6.6.1). Because of the extensive changes to revision 2.00 a separate document was created rather than supplying change pages.

Molecular diversity in irregular or refugee immigrant patients with HBV-genotype-E infection living in the metropolitan area of Naples.

Science.gov (United States)

Sagnelli, Caterina; Ciccozzi, Massimo; Coppola, Nicola; Minichini, Carmine; Lo Presti, Alessandra; Starace, Mario; Alessio, Loredana; Macera, Margherita; Cella, Eleonora; Gualdieri, Luciano; Caprio, Nunzio; Pasquale, Giuseppe; Sagnelli, Evangelista

2017-06-01

In a recent testing in the metropolitan area of Naples, Italy, on 945 irregular immigrants or refugees, 87 HBsAg chronic carriers were identified, 53 of whom were infected by HBV-genotype E. The aim of the present study was to identify the genetic diversity of HBV-genotype E in these 53 immigrants. The 53 immigrant patients with HBV-genotype-E infection were born in Africa, central or eastern Asia, eastern Europe or Latin America. These patients had been seen for a clinical consultation at one of the four first-level units from January 2012 to 2013. The first dataset contained 53 HBV-S gene isolates plus 128 genotype/subgenotype specific reference sequences downloaded from the National Center for Biotechnology Information. The second dataset, comprising the 53 HBV-S gene isolates, previously classified as HBV-genotype E, was used to perform the time-scaled phylogeny reconstruction using a Bayesian approach. Phylogenetic analysis showed that all 53 HBV-S isolates belonged to HBV-genotype E. Bayes factor analysis showed that the relaxed clock exponential growth model fitted the data significantly better than the other models. The time-scaled Bayesian phylogenetic tree of the second dataset showed that the root of the tree dated back to the year 1990 (95% HPD:1984-2000). Four statistically supported clusters were identified. Cluster A dated back to 2012 (95% HPD:1997-2012); cluster B dated back to 2008 (95% HPD:2001-2015); cluster C to 2006 (95% HPD:1999-2013); cluster D to 2004 (95% HPD:1998-2011). This study disclosed the genetic evolution and phylogenesis in a group of HBV-genotype-E-infected immigrants. J. Med. Virol. 89:1015-1024, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

User information document for WinGridder Version 3.0

International Nuclear Information System (INIS)

Pan, Lehua; Pan, Lehua

2007-01-01

WINGRIDDER V3.0 is a Windows-based software for designing and generating numerical grids for numerical simulators that are based on the 'integral finite difference' or the 'control volume' numerical scheme (e.g., TOUGH2, Pruess et al., 1996). The user can design and generate grid that properly represents the stratigraphic features, inclined faults, and repository. WINGRIDDER V3.0 is an upgrade from WINGRIDDER V2.0. This revision includes testable requirements as listed in the Requirements Document (RD), 10024-RD-3.0-00, Section 2. With new features, WINGRIDDER V3.0 adds the ability to generate a multiple-interactive-continuum (MINC) grid

Technical approach document

International Nuclear Information System (INIS)

1989-12-01

The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs

LANES - LOCAL AREA NETWORK EXTENSIBLE SIMULATOR

Science.gov (United States)

Gibson, J.

1994-01-01

The Local Area Network Extensible Simulator (LANES) provides a method for simulating the performance of high speed local area network (LAN) technology. LANES was developed as a design and analysis tool for networking on board the Space Station. The load, network, link and physical layers of a layered network architecture are all modeled. LANES models to different lower-layer protocols, the Fiber Distributed Data Interface (FDDI) and the Star*Bus. The load and network layers are included in the model as a means of introducing upper-layer processing delays associated with message transmission; they do not model any particular protocols. FDDI is an American National Standard and an International Organization for Standardization (ISO) draft standard for a 100 megabit-per-second fiber-optic token ring. Specifications for the LANES model of FDDI are taken from the Draft Proposed American National Standard FDDI Token Ring Media Access Control (MAC), document number X3T9.5/83-16 Rev. 10, February 28, 1986. This is a mature document describing the FDDI media-access-control protocol. Star*Bus, also known as the Fiber Optic Demonstration System, is a protocol for a 100 megabit-per-second fiber-optic star-topology LAN. This protocol, along with a hardware prototype, was developed by Sperry Corporation under contract to NASA Goddard Space Flight Center as a candidate LAN protocol for the Space Station. LANES can be used to analyze performance of a networking system based on either FDDI or Star*Bus under a variety of loading conditions. Delays due to upper-layer processing can easily be nullified, allowing analysis of FDDI or Star*Bus as stand-alone protocols. LANES is a parameter-driven simulation; it provides considerable flexibility in specifying both protocol an run-time parameters. Code has been optimized for fast execution and detailed tracing facilities have been included. LANES was written in FORTRAN 77 for implementation on a DEC VAX under VMS 4.6. It consists of two

Development and Characterization of Gibbsite Component Simulant

Energy Technology Data Exchange (ETDEWEB)

Russell, Renee L.; Smith, Harry D.; Rinehart, Donald E.; Peterson, Reid A.

2009-01-29

According to Bechtel National, Inc.’s (BNI’s) Test Specification 24590-PTF-TSP-RT-06-006, Rev 0, "Simulant Development to Support the Development and Demonstration of Leaching and Ultrafiltration Pretreatment Processes," simulants for boehmite, gibbsite, and filtration are to be developed so they can be used in subsequent bench and integrated testing of the leaching/filtration processes for the River Protection Project-Waste Treatment and Immobilization Plant (RPP-WTP). These simulants will then be used to demonstrate the leaching process and to help refine processing conditions that may impact safety basis considerations (Smith 2006). This report documents PNNL’s results of the gibbsite simulant development.

PORFLOW Simulations Supporting Saltstone Disposal Unit Design Optimization

Energy Technology Data Exchange (ETDEWEB)

Flach, G. P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hang, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Taylor, G. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2015-12-10

SRNL was requested by SRR to perform PORFLOW simulations to support potential cost-saving design modifications to future Saltstone Disposal Units in Z-Area (SRR-CWDA-2015-00120). The design sensitivity cases are defined in a modeling input specification document SRR-CWDA-2015-00133 Rev. 1. A high-level description of PORFLOW modeling and interpretation of results are provided in SRR-CWDA-2015-00169. The present report focuses on underlying technical issues and details of PORFLOW modeling not addressed by the input specification and results interpretation documents. Design checking of PORFLOW modeling is documented in SRNL-L3200-2015-00146.

Document organization by means of graphs

Directory of Open Access Journals (Sweden)

Santa Vallejo Figueroa

2016-12-01

Full Text Available Nowadays documents are the main way to represent information and knowledge in several domains. Continuously users store documents in hard disk or online media according to some personal organization based on topics, but such documents can contain one or more topics. This situation makes hard to access documents when is required. The current search engines are based on the name of file or content, but where the desired term or terms must match exactly as are in the content. In this paper, a method for organize documents by means of graphs is proposed, taking into account the topics of the documents. For this a graph for each document is generated taking into account synonyms, semantic related terms, hyponyms, and hypernyms of nouns and verbs contained in documents. The proposal have been compares against Google Desktop and LogicalDoc with interesting results.

Improving operator training and performance through simulator observations

International Nuclear Information System (INIS)

Flynn, J.P.

1987-01-01

This paper describes the methods and results of INPO observations of simulator training for licensed operators. It discusses the history of the observation program to the present. Effective methods for conducting and documenting simulator observations are discussed. The methods used to analyze the observations is also discussed. The major conclusion of the analysis is that opportunities exist for improvement in the use of emergency operating procedures. Teamwork, communication, and simulator instructor skills are also areas where improvement could be made

Nuclear power plants documentation system

International Nuclear Information System (INIS)

Schwartz, E.L.

1991-01-01

Since the amount of documents (type and quantity) necessary for the entire design of a NPP is very large, this implies that an overall and detailed identification, filling and retrieval system shall be implemented. This is even more applicable to the FINAL QUALITY DOCUMENTATION of the plant, as stipulated by IAEA Safety Codes and related guides. For such a purpose it was developed a DOCUMENTATION MANUAL, which describes in detail the before mentioned documentation system. Here we present the expected goals and results which we have to reach for Angra 2 and 3 Project. (author)

Audit of Orthopaedic Surgical Documentation

Directory of Open Access Journals (Sweden)

Fionn Coughlan

2015-01-01

Full Text Available Introduction. The Royal College of Surgeons in England published guidelines in 2008 outlining the information that should be documented at each surgery. St. James’s Hospital uses a standard operation sheet for all surgical procedures and these were examined to assess documentation standards. Objectives. To retrospectively audit the hand written orthopaedic operative notes according to established guidelines. Methods. A total of 63 operation notes over seven months were audited in terms of date and time of surgery, surgeon, procedure, elective or emergency indication, operative diagnosis, incision details, signature, closure details, tourniquet time, postop instructions, complications, prosthesis, and serial numbers. Results. A consultant performed 71.4% of procedures; however, 85.7% of the operative notes were written by the registrar. The date and time of surgery, name of surgeon, procedure name, and signature were documented in all cases. The operative diagnosis and postoperative instructions were frequently not documented in the designated location. Incision details were included in 81.7% and prosthesis details in only 30% while the tourniquet time was not documented in any. Conclusion. Completion and documentation of operative procedures were excellent in some areas; improvement is needed in documenting tourniquet time, prosthesis and incision details, and the location of operative diagnosis and postoperative instructions.

Synthesis document on the storage and packages concepts: phenomenological and operational reference corrosion HAVL

International Nuclear Information System (INIS)

Helie, M.; Bataillon, Ch.; Desgranges, C.; Perrin, S.

2004-12-01

In the today concept, the long life high activity nuclear wastes (HAVL) would be storage in metallic containers. In the framework of the COCON program, simulations and knowledge of the corrosion problems bond to the wastes containers management are realized, in order to predict the long time behavior of packages storage and disposal. This reference document takes stock on the knowledge and the scientific simulation of corrosion phenomena which are decisive for the long life behavior of the external metallic wall of high activity nuclear wastes packages for the storage and the disposal and aims to provide bases of an operational modelization of these phenomena. (A.L.B.)

Quality assurance for computed-tomography simulators and the computed-tomography-simulation process: Report of the AAPM Radiation Therapy Committee Task Group No. 66

International Nuclear Information System (INIS)

Mutic, Sasa; Palta, Jatinder R.; Butker, Elizabeth K.; Das, Indra J.; Huq, M. Saiful; Loo, Leh-Nien Dick; Salter, Bill J.; McCollough, Cynthia H.; Van Dyk, Jacob

2003-01-01

This document presents recommendations of the American Association of Physicists in Medicine (AAPM) for quality assurance of computed-tomography- (CT) simulators and CT-simulation process. This report was prepared by Task Group No. 66 of the AAPM Radiation Therapy Committee. It was approved by the Radiation Therapy Committee and by the AAPM Science Council

BENCHMARKING LEARNER EDUCATION USING ONLINE BUSINESS SIMULATION

Directory of Open Access Journals (Sweden)

Alfred H. Miller

2016-06-01

Full Text Available For programmatic accreditation by the Accreditation Council of Business Schools and Programs (ACBSP, business programs are required to meet STANDARD #4, Measurement and Analysis of Student Learning and Performance. Business units must demonstrate that outcome assessment systems are in place using documented evidence that shows how the results are being used to further develop or improve the academic business program. The Higher Colleges of Technology, a 17 campus federal university in the United Arab Emirates, differentiates its applied degree programs through a ‘learning by doing ethos,’ which permeates the entire curricula. This paper documents benchmarking of education for managing innovation. Using business simulation for Bachelors of Business, Year 3 learners, in a business strategy class; learners explored through a simulated environment the following functional areas; research and development, production, and marketing of a technology product. Student teams were required to use finite resources and compete against other student teams in the same universe. The study employed an instrument developed in a 60-sample pilot study of business simulation learners against which subsequent learners participating in online business simulation could be benchmarked. The results showed incremental improvement in the program due to changes made in assessment strategies, including the oral defense.

ENDF/B summary documentation

International Nuclear Information System (INIS)

Kinsey, R.

1979-07-01

This publication provides a localized source of descriptions for the evaluations contained in the ENDF/B Library. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The summary documentations were written by the CSEWB (Cross Section Evaluation Working Group) evaluators and compiled by NNDC (National Nuclear Data Center). This edition includes documentation for materials found on ENDF/B Version V tapes 501 to 516 (General Purpose File) excluding tape 504. ENDF/B-V also includes tapes containing partial evaluations for the Special Purpose Actinide (521, 522), Dosimetry (531), Activation (532), Gas Production (533), and Fission Product (541-546) files. The materials found on these tapes are documented elsewhere. Some of the evaluation descriptions in this report contain cross sections or energy level information

Growing electronic documents created by researchers

Directory of Open Access Journals (Sweden)

Monika Weiss

2017-05-01

Full Text Available In the contemporary world technology is an indispensable element, both in personal and professional sphere. Despite the fact, that we do not attach significance to it in our everyday lives, the technological development engulfed us and still reminds us about that. In the face of dynamically growing digitization there occurred a new form of document – an electronic document. The study concerns the growing electronic documentation among researchers working at the Nicolaus Copernicus University in Toruń. The analysis of surveys and interviews resulted in thesis, that researchers use e-document more frequently than analog documentation. Flexibility and accessibility of this type of documents become a problem in personal papers which will be archived in the future – maybe in most part in the form of electronic documentation.

The investigation of crimes refering to forgery of documents and possession of forged documents

OpenAIRE

Kotovienė, Danutė

2011-01-01

THE INVESTIGATION OF CRIMES REFERING TO FORGERY OF DOCUMENTS AND POSSESSION OF FORGED DOCUMENTS Constantly improving informational technologies more and more get into our daily routine: nowadays it is widely spread internet payments, purchases, signing on-line agreements using electronic signatures. However, paper documents or other made of appropriate materials, which have material evidence, still have a very significant impact on our life. Its convey different aspects of states’ public work...

Self-authentication of value documents

Science.gov (United States)

Hayosh, Thomas D.

1998-04-01

To prevent fraud it is critical to distinguish an authentic document from a counterfeit or altered document. Most current technologies rely on difficult-to-print human detectable features which are added to a document to prevent illegal reproduction. Fraud detection is mostly accomplished by human observation and is based upon the examiner's knowledge, experience and time allotted for examination of a document. Another approach to increasing the security of a value document is to add a unique property to each document. Data about that property is then encoded on the document itself and finally secured using a public key based digital signature. In such a scheme, machine readability of authenticity is possible. This paper describes a patent-applied-for methodology using the unique property of magnetic ink printing, magnetic remanence, that provides for full self- authentication when used with a recordable magnetic stripe for storing a digital signature and other document data. Traditionally the authenticity of a document is determined by physical examination for color, background printing, paper texture, printing resolution, and ink characteristics. On an initial level, there may be numerous security features present on a value document but only a few can be detected and evaluated by the untrained individual. Because security features are normally not standardized except on currency, training tellers and cashiers to do extensive security evaluation is not practical, even though these people are often the only people who get a chance to closely examine the document in a payment system which is back-end automated. In the context of this paper, one should be thinking about value documents such as commercial and personal checks although the concepts presented here can easily be applied to travelers cheques, credit cards, event tickets, passports, driver's licenses, motor vehicle titles, and even currency. For a practical self-authentication system, the false alarms

Pretest analysis document for Test S-FS-7

International Nuclear Information System (INIS)

Hall, D.G.

1985-06-01

This report documents the pretest calculations completed for Semiscale Test S-FS-7. This test will simulate a transient initiated by a 14.3% break in a steam generator bottom feedwater line downstream of the check valve. The initial conditions represent normal operating conditions for a C-E System 80 nuclear power plant. Predictions of transients resulting from feedwater line breaks in these plants have indicated that significant primary system overpressurization may occur. The results of a RELAP5/MOD2/CY21 code calculation indicate that the test objectives for Test S-FS-7 can be achieved. The primary system overpressurization will occur but pose no threat to personnel or to plant integrity. 3 refs., 15 figs., 5 tabs

Numerical simulation of in-situ chemical oxidation (ISCO) and biodegradation of petroleum hydrocarbons using a coupled model for bio-geochemical reactive transport

Science.gov (United States)

Marin, I. S.; Molson, J. W.

2013-05-01

Petroleum hydrocarbons (PHCs) are a major source of groundwater contamination, being a worldwide and well-known problem. Formed by a complex mixture of hundreds of organic compounds (including BTEX - benzene, toluene, ethylbenzene and xylenes), many of which are toxic and persistent in the subsurface and are capable of creating a serious risk to human health. Several remediation technologies can be used to clean-up PHC contamination. In-situ chemical oxidation (ISCO) and intrinsic bioremediation (IBR) are two promising techniques that can be applied in this case. However, the interaction of these processes with the background aquifer geochemistry and the design of an efficient treatment presents a challenge. Here we show the development and application of BIONAPL/Phreeqc, a modeling tool capable of simulating groundwater flow, contaminant transport with coupled biological and geochemical processes in porous or fractured porous media. BIONAPL/Phreeqc is based on the well-tested BIONAPL/3D model, using a powerful finite element simulation engine, capable of simulating non-aqueous phase liquid (NAPL) dissolution, density-dependent advective-dispersive transport, and solving the geochemical and kinetic processes with the library Phreeqc. To validate the model, we compared BIONAPL/Phreeqc with results from the literature for different biodegradation processes and different geometries, with good agreement. We then used the model to simulate the behavior of sodium persulfate (NaS2O8) as an oxidant for BTEX degradation, coupled with sequential biodegradation in a 2D case and to evaluate the effect of inorganic geochemistry reactions. The results show the advantages of a treatment train remediation scheme based on ISCO and IBR. The numerical performance and stability of the integrated BIONAPL/Phreeqc model was also verified.

2002 reference document

International Nuclear Information System (INIS)

2002-01-01

This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

A Novel IncA/C1 Group Conjugative Plasmid, Encoding VIM-1 Metallo-Beta-Lactamase, Mediates the Acquisition of Carbapenem Resistance in ST104 Klebsiella pneumoniae Isolates from Neonates in the Intensive Care Unit of V. Monaldi Hospital in Naples.

Science.gov (United States)

Esposito, Eliana P; Gaiarsa, Stefano; Del Franco, Mariateresa; Crivaro, Valeria; Bernardo, Mariano; Cuccurullo, Susanna; Pennino, Francesca; Triassi, Maria; Marone, Piero; Sassera, Davide; Zarrilli, Raffaele

2017-01-01

The emergence of carbapenemase producing Enterobacteriaceae has raised major public health concern. The aim of this study was to investigate the molecular epidemiology and the mechanism of carbapenem resistance acquisition of multidrug-resistant Klebsiella pneumoniae isolates from 20 neonates in the neonatal intensive care unit (NICU) of the V. Monaldi Hospital in Naples, Italy, from April 2015 to March 2016. Genotype analysis by pulsed-field gel electrophoresis (PFGE) and multi-locus sequence typing (MLST) identified PFGE type A and subtypes A1 and A2 in 17, 2, and 1 isolates, respectively, and assigned all isolates to sequence type (ST) 104. K. pneumoniae isolates were resistant to all classes of β-lactams including carbapenems, fosfomycin, gentamicin, and trimethoprim-sulfamethoxazole, but susceptible to quinolones, amikacin, and colistin. Conjugation experiments demonstrated that resistance to third-generation cephems and imipenem could be transferred along with an IncA/C plasmid containing the extended spectrum β-lactamase bla SHV -12 and carbapenem-hydrolyzing metallo-β-lactamase bla V IM-1 genes. The plasmid that we called pIncAC_KP4898 was 156,252 bp in size and included a typical IncA/C backbone, which was assigned to ST12 and core genome (cg) ST12.1 using the IncA/C plasmid MLST (PMLST) scheme. pIncAC_KP4898 showed a mosaic structure with bla V IM-1 into a class I integron, bla SHV -12 flanked by IS6 elements, a mercury resistance and a macrolide 2'-phosphotransferase clusters, ant(3″), aph(3″), aacA4, qnrA1, sul1 , and dfrA14 conferring resistance to aminoglycosides, quinolones, sulfonamides, and trimethoprim, respectively, several genes predicted to encode transfer functions and proteins involved in DNA transposition. The acquisition of pIncAC_KP4898 carrying bla V IM-1 and bla SHV -12 contributed to the spread of ST104 K. pneumoniae in the NICU of V. Monaldi Hospital in Naples.

A Novel IncA/C1 Group Conjugative Plasmid, Encoding VIM-1 Metallo-Beta-Lactamase, Mediates the Acquisition of Carbapenem Resistance in ST104 Klebsiella pneumoniae Isolates from Neonates in the Intensive Care Unit of V. Monaldi Hospital in Naples

Directory of Open Access Journals (Sweden)

Eliana P. Esposito

2017-11-01

Full Text Available The emergence of carbapenemase producing Enterobacteriaceae has raised major public health concern. The aim of this study was to investigate the molecular epidemiology and the mechanism of carbapenem resistance acquisition of multidrug-resistant Klebsiella pneumoniae isolates from 20 neonates in the neonatal intensive care unit (NICU of the V. Monaldi Hospital in Naples, Italy, from April 2015 to March 2016. Genotype analysis by pulsed-field gel electrophoresis (PFGE and multi-locus sequence typing (MLST identified PFGE type A and subtypes A1 and A2 in 17, 2, and 1 isolates, respectively, and assigned all isolates to sequence type (ST 104. K. pneumoniae isolates were resistant to all classes of β-lactams including carbapenems, fosfomycin, gentamicin, and trimethoprim–sulfamethoxazole, but susceptible to quinolones, amikacin, and colistin. Conjugation experiments demonstrated that resistance to third-generation cephems and imipenem could be transferred along with an IncA/C plasmid containing the extended spectrum β-lactamase blaSHV -12 and carbapenem-hydrolyzing metallo-β-lactamase blaV IM-1 genes. The plasmid that we called pIncAC_KP4898 was 156,252 bp in size and included a typical IncA/C backbone, which was assigned to ST12 and core genome (cg ST12.1 using the IncA/C plasmid MLST (PMLST scheme. pIncAC_KP4898 showed a mosaic structure with blaV IM-1 into a class I integron, blaSHV -12 flanked by IS6 elements, a mercury resistance and a macrolide 2′-phosphotransferase clusters, ant(3″, aph(3″, aacA4, qnrA1, sul1, and dfrA14 conferring resistance to aminoglycosides, quinolones, sulfonamides, and trimethoprim, respectively, several genes predicted to encode transfer functions and proteins involved in DNA transposition. The acquisition of pIncAC_KP4898 carrying blaV IM-1 and blaSHV -12 contributed to the spread of ST104 K. pneumoniae in the NICU of V. Monaldi Hospital in Naples.

Document retrieval on repetitive string collections.

Science.gov (United States)

Gagie, Travis; Hartikainen, Aleksi; Karhu, Kalle; Kärkkäinen, Juha; Navarro, Gonzalo; Puglisi, Simon J; Sirén, Jouni

2017-01-01

Most of the fastest-growing string collections today are repetitive, that is, most of the constituent documents are similar to many others. As these collections keep growing, a key approach to handling them is to exploit their repetitiveness, which can reduce their space usage by orders of magnitude. We study the problem of indexing repetitive string collections in order to perform efficient document retrieval operations on them. Document retrieval problems are routinely solved by search engines on large natural language collections, but the techniques are less developed on generic string collections. The case of repetitive string collections is even less understood, and there are very few existing solutions. We develop two novel ideas, interleaved LCPs and precomputed document lists , that yield highly compressed indexes solving the problem of document listing (find all the documents where a string appears), top- k document retrieval (find the k documents where a string appears most often), and document counting (count the number of documents where a string appears). We also show that a classical data structure supporting the latter query becomes highly compressible on repetitive data. Finally, we show how the tools we developed can be combined to solve ranked conjunctive and disjunctive multi-term queries under the simple [Formula: see text] model of relevance. We thoroughly evaluate the resulting techniques in various real-life repetitiveness scenarios, and recommend the best choices for each case.

Lifecycle management for nuclear engineering project documents

International Nuclear Information System (INIS)

Zhang Li; Zhang Ming; Zhang Ling

2010-01-01

The nuclear engineering project documents with great quantity and various types of data, in which the relationships of each document are complex, the edition of document update frequently, are managed difficultly. While the safety of project even the nuclear safety is threatened seriously by the false documents and mistakes. In order to ensure the integrality, veracity and validity of project documents, the lifecycle theory of document is applied to build documents center, record center, structure and database of document lifecycle management system. And the lifecycle management is used to the documents of nuclear engineering projects from the production to pigeonhole, to satisfy the quality requirement of nuclear engineering projects. (authors)

Triangular clustering in document networks

Energy Technology Data Exchange (ETDEWEB)

Cheng Xueqi; Ren Fuxin [Institute of Computing Technology, Chinese Academy of Sciences, Beijing 100190 (China); Zhou Shi [Department of Computer Science, University College London, Malet Place, London WC1E 6BT (United Kingdom); Hu Maobin [School of Engineering Science, University of Science and Technology of China, Hefei 230026 (China)], E-mail: cxq@ict.ac.cn, E-mail: renfuxin@software.ict.ac.cn, E-mail: s.zhou@adastral.ucl.ac.uk, E-mail: humaobin@ustc.edu.cn

2009-03-15

Document networks have the characteristic that a document node, e.g. a webpage or an article, carries meaningful content. Properties of document networks are not only affected by topological connectivity between nodes, but are also strongly influenced by the semantic relation between the content of the nodes. We observed that document networks have a large number of triangles and a high value clustering coefficient. Also there is a strong correlation between the probability of formation of a triangle and the content similarity among the three nodes involved. We propose the degree-similarity product (DSP) model, which well reproduces these properties. The model achieves this by using a preferential attachment mechanism that favours the linkage between nodes that are both popular and similar. This work is a step forward towards a better understanding of the structure and evolution of document networks.

Level, potential sources of polycyclic aromatic hydrocarbons (PAHs) in particulate matter (PM10) in Naples

Science.gov (United States)

Di Vaio, Paola; Cocozziello, Beatrice; Corvino, Angela; Fiorino, Ferdinando; Frecentese, Francesco; Magli, Elisa; Onorati, Giuseppe; Saccone, Irene; Santagada, Vincenzo; Settimo, Gaetano; Severino, Beatrice; Perissutti, Elisa

2016-03-01

In Naples, particulate matter PM10 associated with polycyclic aromatic hydrocarbons (PAHs) in ambient air were determined in urban background (NA01) and urban traffic (NA02) sites. The principal objective of the study was to determine the concentration and distribution of PAHs in PM10 for identification of their possible sources (through diagnostic ratio - DR and principal component analysis - PCA) and an estimation of the human health risk (from exposure to airborne TEQ). Airborne PM10 samples were collected on quartz filters using a Low Volume Sampler (LVS) for 24 h with seasonal samples (autumn, winter, spring and summer) of about 15 days each between October 2012 and July 2013. The PM10 mass was gravimetrically determined. The PM10 levels, in all seasons, were significantly higher (P gas chromatography-mass spectrometer (GC-MS) analysis. The concentration of Benzo[a]Pyrene, BaP (EU and National limit value: 1 ng m-3 in PM10), varied from 0.065 ng m-3 during autumn time to 0.872 ng m-3 in spring time (NA01) and from 0.120 ng m-3 during autumn time to 1.48 ng m-3 of winter time (NA02) with four overshoots. In NA02 the trend of Σ12 PAHs was comparable to NA01 but were observed higher values than NA01. In fact, the mean concentration of Σ12 PAHs, in urban-traffic site was generally 2 times greater than in urban-background site in all the campaigns. PAHs with 5 and 6 ring, many of which are suspected carcinogens or genotoxic agents, (i.e Benzo[a]Pyrene, Indeno[1,2,3-cd]Pyrene, Benzo[b]Fluoranthene, Benzo[k]Fluoranthene and Benzo[g,h,i]Perylene), had a large contribution (∼50-55%) of total PAHs concentration in PM10 in two sites and in each of the campaigns. Diagnostic ratio analysis and PCA suggested a substantial contributions from traffic emission with minimal influence from coal combustion and natural gas emissions. In particular diesel vehicular emissions were the major source of PAHs at the studied sites. The use of Toxicity Equivalence Quantity (TEQ

ENDF/B summary documentation

Energy Technology Data Exchange (ETDEWEB)

Kinsey, R. (comp.)

1979-07-01

This publication provides a localized source of descriptions for the evaluations contained in the ENDF/B Library. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The summary documentations were written by the CSEWB (Cross Section Evaluation Working Group) evaluators and compiled by NNDC (National Nuclear Data Center). This edition includes documentation for materials found on ENDF/B Version V tapes 501 to 516 (General Purpose File) excluding tape 504. ENDF/B-V also includes tapes containing partial evaluations for the Special Purpose Actinide (521, 522), Dosimetry (531), Activation (532), Gas Production (533), and Fission Product (541-546) files. The materials found on these tapes are documented elsewhere. Some of the evaluation descriptions in this report contain cross sections or energy level information. (RWR)

Fusion Simulation Program Definition. Final report

International Nuclear Information System (INIS)

Cary, John R.

2012-01-01

We have completed our contributions to the Fusion Simulation Program Definition Project. Our contributions were in the overall planning with concentration in the definition of the area of Software Integration and Support. We contributed to the planning of multiple meetings, and we contributed to multiple planning documents

Reliable planning and monitoring tools by dismantling 3D photographic image of high resolution and document management systems. Application MEDS system; Planificacion fiable y seguimiento del desmantelamiento mediante herramientas 3D, imagen fotografica de alta resolucion y sistemas de gestion documental. Aplicacion del sistema MEDS

Energy Technology Data Exchange (ETDEWEB)

Vela Morales, F.

2010-07-01

MEDS system (Metric Environment Documentation System) is a method developed by CT3 based engineering documentation generation metric of a physical environment using measurement tools latest technology and high precision, such as the Laser Scanner. With this equipment it is possible to obtain three-dimensional information of a physical environment through the 3D coordinates of millions of points. This information is processed by software that is very useful tool for modeling operations and 3D simulations.

The development of AECB regulatory documents

International Nuclear Information System (INIS)

Joyce, M.

1981-01-01

This document describes the Atomic Energy Control Board's (AECB) approach to the development and preparation of regulatory documents. The principal factors that have shaped the AECB'a regulatory approach are identified as background to the evolution of regulatory documents as are a number of current influences that affect the present and future development of these documents. Also described are the process by which regulatory documents are prepared and published and the points of contact between this process and the Canadian Standards Association program for nuclear standards. (author)

NILDE, Network Inter Library Document Exchange: An Italian Document Delivery System

Science.gov (United States)

Brunetti, F.; Gasperini, A.; Mangiaracina, S.

2007-10-01

This poster presents NILDE, a document delivery system supporting the exchange of documents via the internet. The system has been set up by the Central Library of the National Research Council of Bologna (Italy) in order to make use of new internet technology, to promote cooperation between Italian university libraries and research libraries, and to achieve quick response times in satisfying DD requests. The Arcetri Astrophysical Observatory Library was the first astronomical library to join the NILDE project from its earliest days in 2002. Many were the reasons for this choice: automation of the DD processes, security and reliability of the network, creation of usage statistics and reports, reduction of DD System management costs and so on. This work describes the benefits of NILDE and discusses the role of an organized document delivery system as an important tool to cope with the difficult constraints of the publishing market.

IDC System Specification Document.

Energy Technology Data Exchange (ETDEWEB)

Clifford, David J.

2014-12-01

This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris

INFCE plenary conference documents

International Nuclear Information System (INIS)

This document consists of the reports to the First INFCE Plenary Conference (November 1978) by the Working Groups a Plenary Conference of its actions and decisions, the Communique of the Final INFCE Plenary Conference (February 1980), and a list of all documents in the IAEA depository for INFCE

Literature for flight simulator (motion) requirements research

Science.gov (United States)

2010-10-29

This is the yearly snapshot of the literature examined in the framework of the Federal Aviation Administration/Volpe Center Flight Simulator Human Factors Program and entered in an EndNote database. It describes 1131 documents, 118 more than last y...

Maury Documentation

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Supporting documentation for the Maury Collection of marine observations. Includes explanations from Maury himself, as well as guides and descriptions by the U.S....

Effect of Porous Media and Fluid Properties on Dense Non-Aqueous Phase Liquid Migration and Dilution Mass Flux

National Research Council Canada - National Science Library

Totten, Christian T

2005-01-01

.... Media grain size and NAPL wettability were varied for relative comparisons. Fluid properties including density differential and interfacial tension between NAPL and water were varied for relative comparisons...

High Performance Electrical Modeling and Simulation Software Normal Environment Verification and Validation Plan, Version 1.0; TOPICAL

International Nuclear Information System (INIS)

WIX, STEVEN D.; BOGDAN, CAROLYN W.; MARCHIONDO JR., JULIO P.; DEVENEY, MICHAEL F.; NUNEZ, ALBERT V.

2002-01-01

The requirements in modeling and simulation are driven by two fundamental changes in the nuclear weapons landscape: (1) The Comprehensive Test Ban Treaty and (2) The Stockpile Life Extension Program which extends weapon lifetimes well beyond their originally anticipated field lifetimes. The move from confidence based on nuclear testing to confidence based on predictive simulation forces a profound change in the performance asked of codes. The scope of this document is to improve the confidence in the computational results by demonstration and documentation of the predictive capability of electrical circuit codes and the underlying conceptual, mathematical and numerical models as applied to a specific stockpile driver. This document describes the High Performance Electrical Modeling and Simulation software normal environment Verification and Validation Plan

Agent Based Modelling for Social Simulation

NARCIS (Netherlands)

Smit, S.K.; Ubink, E.M.; Vecht, B. van der; Langley, D.J.

2013-01-01

This document is the result of an exploratory project looking into the status of, and opportunities for Agent Based Modelling (ABM) at TNO. The project focussed on ABM applications containing social interactions and human factors, which we termed ABM for social simulation (ABM4SS). During the course

Document control system as an integral part of RA documentation database application

International Nuclear Information System (INIS)

Steljic, M.M; Ljubenov, V.Lj. . E-mail address of corresponding author: milijanas@vin.bg.ac.yu; Steljic, M.M.)

2005-01-01

The decision about the final shutdown of the RA research reactor in Vinca Institute has been brought in 2002, and therefore the preparations for its decommissioning have begun. All activities are supervised by the International Atomic Energy Agency (IAEA), which also provides technical and experts' support. This paper describes the document control system is an integral part of the existing RA documentation database. (author)

Task-Specific Asteroid Simulants for Ground Testing, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The project will produce at least four asteroid simulants at high fidelity for mineral content and particle size, created through standardized inputs and documented...

SEAscan 3.5: A simulator performance analyzer

International Nuclear Information System (INIS)

Dennis, T.; Eisenmann, S.

1990-01-01

SEAscan 3.5 is a personal computer based tool developed to analyze the dynamic performance of nuclear power plant training simulators. The system has integrated features to provide its own human featured performance. In this paper, the program is described as a tool for the analysis of training simulator performance. The structure and operating characteristics of SEAscan 3.5 are described. The hardcopy documents are shown to aid in verification of conformance to ANSI/ANS-3.5-1985

EDF Group - 2010 Reference Document

International Nuclear Information System (INIS)

2011-04-01

Beside the accounts of EDF for 2008 and 2009, this voluminous document presents persons in charge, legal account auditors, and how risks are managed within the company. It gives an overview of EDF activities, of its organization, of its assets. It presents and discusses its financial situation and results, indicates the main contracts, and proposes other documents concerning the company. Many documents and reports are provided in appendix

Document image retrieval through word shape coding.

Science.gov (United States)

Lu, Shijian; Li, Linlin; Tan, Chew Lim

2008-11-01

This paper presents a document retrieval technique that is capable of searching document images without OCR (optical character recognition). The proposed technique retrieves document images by a new word shape coding scheme, which captures the document content through annotating each word image by a word shape code. In particular, we annotate word images by using a set of topological shape features including character ascenders/descenders, character holes, and character water reservoirs. With the annotated word shape codes, document images can be retrieved by either query keywords or a query document image. Experimental results show that the proposed document image retrieval technique is fast, efficient, and tolerant to various types of document degradation.

Civilian Radioactive Waste Management System Requirements Document

International Nuclear Information System (INIS)

1992-12-01

This document specifies the top-level requirements for the Civilian Radioactive Waste Management System (CRWMS). The document is referred to herein as the CRD, for CRWMS Requirements document. The OCRWM System Engineering Management Plan (SEMP) establishes the technical document hierarchy (hierarchy of technical requirements and configuration baseline documents) for the CRWMS program. The CRD is the top-level document in this hierarchy. The immediate subordinate documents are the System Requirements Documents (SRDS) for the four elements of the CRWMS and the Interface Specification (IFS). The four elements of the CRWMS are the Waste Acceptance System, the Transportation System, the Monitored Retrievable Storage (MRS) System and the Mined Geologic Disposal System (MGDS). The Interface Specification describes the six inter-element interfaces between the four elements. This hierarchy establishes the requirements to be addressed by the design of the system elements. Many of the technical requirements for the CRWMS are documented in a variety of Federal regulations, DOE directives and other Government documentation. It is the purpose of the CRD to establish the technical requirements for the entire program. In doing so, the CRD summarizes source documentation for requirements that must be addressed by the program, specifies particular requirements, and documents derived requirements that are not covered in regulatory and other Government documentation, but are necessary to accomplish the mission of the CRWMS. The CRD defines the CRWMS by identifying the top-level functions the elements must perform (These top-level functions were derived using functional analysis initially documented in the Physical System Requirements (PSR) documents). The CRD also defines the top-level physical architecture of the system and allocates the functions and requirements to the architectural elements of the system

RFQ simulation code

International Nuclear Information System (INIS)

Lysenko, W.P.

1984-04-01

We have developed the RFQLIB simulation system to provide a means to systematically generate the new versions of radio-frequency quadrupole (RFQ) linac simulation codes that are required by the constantly changing needs of a research environment. This integrated system simplifies keeping track of the various versions of the simulation code and makes it practical to maintain complete and up-to-date documentation. In this scheme, there is a certain standard version of the simulation code that forms a library upon which new versions are built. To generate a new version of the simulation code, the routines to be modified or added are appended to a standard command file, which contains the commands to compile the new routines and link them to the routines in the library. The library itself is rarely changed. Whenever the library is modified, however, this modification is seen by all versions of the simulation code, which actually exist as different versions of the command file. All code is written according to the rules of structured programming. Modularity is enforced by not using COMMON statements, simplifying the relation of the data flow to a hierarchy diagram. Simulation results are similar to those of the PARMTEQ code, as expected, because of the similar physical model. Different capabilities, such as those for generating beams matched in detail to the structure, are available in the new code for help in testing new ideas in designing RFQ linacs

Heads-Up Display with Virtual Precision Approach Path Indicator as Implemented in a Real-Time Piloted Lifting-Body Simulation

Science.gov (United States)

Neuhaus, Jason R.

2018-01-01

This document describes the heads-up display (HUD) used in a piloted lifting-body entry, approach and landing simulation developed for the simulator facilities of the Simulation Development and Analysis Branch (SDAB) at NASA Langley Research Center. The HUD symbology originated with the piloted simulation evaluations of the HL-20 lifting body concept conducted in 1989 at NASA Langley. The original symbology was roughly based on Shuttle HUD symbology, as interpreted by Langley researchers. This document focuses on the addition of the precision approach path indicator (PAPI) lights to the HUD overlay.

Mario Costa tarantino napoletano

DEFF Research Database (Denmark)

Chemi, Tatiana

and the aristocratic tradition. Romanza, opera, operetta, popular folk songs. He became famous thankfully to this last one, when the easy listening music industry was starting its productions. This is the first published biography on the artist and is based on original documents and sources.......Mario Costa was born in Taranto, a town in the sunny south of Italy, but early in his childhood moved to Naples, the cultural capital of southern Italy between the last two centuries. He became a musician, composer and poet and he tried many different genres of music: the popular...

Patterns for Effectively Documenting Frameworks

Science.gov (United States)

Aguiar, Ademar; David, Gabriel

Good design and implementation are necessary but not sufficient pre-requisites for successfully reusing object-oriented frameworks. Although not always recognized, good documentation is crucial for effective framework reuse, and often hard, costly, and tiresome, coming with many issues, especially when we are not aware of the key problems and respective ways of addressing them. Based on existing literature, case studies and lessons learned, the authors have been mining proven solutions to recurrent problems of documenting object-oriented frameworks, and writing them in pattern form, as patterns are a very effective way of communicating expertise and best practices. This paper presents a small set of patterns addressing problems related to the framework documentation itself, here seen as an autonomous and tangible product independent of the process used to create it. The patterns aim at helping non-experts on cost-effectively documenting object-oriented frameworks. In concrete, these patterns provide guidance on choosing the kinds of documents to produce, how to relate them, and which contents to include. Although the focus is more on the documents themselves, rather than on the process and tools to produce them, some guidelines are also presented in the paper to help on applying the patterns to a specific framework.

Indian Language Document Analysis and Understanding

Indian Academy of Sciences (India)

documents would contain text of more than one script (for example, English, Hindi and the ... O'Gorman and Govindaraju provides a good overview on document image ... word level in bilingual documents containing Roman and Tamil scripts.

Pretest analysis document for Test S-FS-6

International Nuclear Information System (INIS)

Shaw, R.A.; Hall, D.G.

1985-05-01

This report documents the pretest analyses completed for Semiscale Test S-FS-6. This test will simulate a transient initiated by a 100% break in a steam generator bottom feedwater line downstream of the check valve. The initial conditions represent normal operating conditions for a C-E System 80 nuclear power plant. Predictions of transients resulting from feedwater line breaks in these plants have indicated that significant primary system overpressurization may occur. The enclosed analyses include a RELAP5/MOD2/CY21 code calculation and preliminary results from a facility hot, integrated test which was conducted to near S-FS-6 specifications. The results of these analyses indicate that the test objectives for Test S-FS-6 can be achieved. The primary system overpressurization will pose no threat to personnel or plant integrity

Electronic Document Management Using Inverted Files System

Science.gov (United States)

Suhartono, Derwin; Setiawan, Erwin; Irwanto, Djon

2014-03-01

The amount of documents increases so fast. Those documents exist not only in a paper based but also in an electronic based. It can be seen from the data sample taken by the SpringerLink publisher in 2010, which showed an increase in the number of digital document collections from 2003 to mid of 2010. Then, how to manage them well becomes an important need. This paper describes a new method in managing documents called as inverted files system. Related with the electronic based document, the inverted files system will closely used in term of its usage to document so that it can be searched over the Internet using the Search Engine. It can improve document search mechanism and document save mechanism.

Electronic Document Management Using Inverted Files System

Directory of Open Access Journals (Sweden)

Suhartono Derwin

2014-03-01

Full Text Available The amount of documents increases so fast. Those documents exist not only in a paper based but also in an electronic based. It can be seen from the data sample taken by the SpringerLink publisher in 2010, which showed an increase in the number of digital document collections from 2003 to mid of 2010. Then, how to manage them well becomes an important need. This paper describes a new method in managing documents called as inverted files system. Related with the electronic based document, the inverted files system will closely used in term of its usage to document so that it can be searched over the Internet using the Search Engine. It can improve document search mechanism and document save mechanism.

An empirical investigation of operator performance in cognitively demanding simulated emergencies

International Nuclear Information System (INIS)

Roth, E.M.; Mumaw, R.J.; Lewis, P.M.

1994-07-01

This report documents the results of an empirical study of nuclear power plant operator performance in cognitively demanding simulated emergencies. During emergencies operators follow highly prescriptive written procedures. The objectives of the study were to understand and document what role higher-level cognitive activities such as diagnosis, or more generally 'situation assessment', play in guiding operator performance, given that operators utilize procedures in responding to the events. The study examined crew performance in variants of two emergencies: (1) an Interfacing System Loss of Coolant Accident and (2) a Loss of Heat Sink scenario. Data on operator performance were collected using training simulators at two plant sites. Up to 11 crews from each plant participated in each of two simulated emergencies for a total of 38 cases. Crew performance was videotaped and partial transcripts were produced and analyzed. The results revealed a number of instances where higher-level cognitive activities such as situation assessment and response planning enabled crews to handle aspects of the situation that were not fully addressed by the procedures. This report documents these cases and discusses their implications for the development and evaluation of training and control room aids, as well as for human reliability analyses

Representation and traversal of documentation space. Data analysis, neuron networks and image banks

International Nuclear Information System (INIS)

Lelu, A.; Rosenblatt, D.

1986-01-01

Improvements in the visual representation of considerable amounts of data for the user is necessary for progress in documentation systems. We review practical implementations in this area, which additionally integrate concepts arising from data analysis in the most general sense. The relationship between data analysis and neuron networks is then established. Following a description of simulation experiments, we finally present software for outputting and traversing image banks which integrate most of the concept developed in this article [fr

Technical basis document for internal dosimetry

International Nuclear Information System (INIS)

Hickman, D.P.

1991-01-01

This document provides the technical basis for the Chem-Nuclear Geotech (Geotech) internal dosimetry program. Geotech policy describes the intentions of the company in complying with radiation protection standards and the as low as reasonably achievable (ALARA) program. It uses this policy and applicable protection standards to derive acceptable methods and levels of bioassay to assure compliance. The models and computational methods used are described in detail within this document. FR-om these models, dose- conversion factors and derived limits are computed. These computations are then verified using existing documentation and verification information or by demonstration of the calculations used to obtain the dose-conversion factors and derived limits. Recommendations for methods of optimizing the internal dosimetry program to provide effective monitoring and dose assessment for workers are provided in the last section of this document. This document is intended to be used in establishing an accredited dosimetry program in accordance with expected Department of Energy Laboratory Accreditation Program (DOELAP) requirements for the selected radionuclides provided in this document, including uranium mill tailing mixtures. Additions and modifications to this document and procedures derived FR-om this document are expected in the future according to changes in standards and changes in programmatic mission

Specifications for human factors guiding documents

Energy Technology Data Exchange (ETDEWEB)

Rhodes, W; Szlapetis, I; MacGregor, C [Rhodes and Associates Inc., Toronto, ON (Canada)

1995-04-01

This report specifies the content, function and appearance of three proposed human factors guiding documents to be used by the Atomic Energy Control board and its licensees. These three guiding documents, to be developed at a later date, are: (a) Human Factors Process Guide; (b) Human Factors Activities Guide; and (c) Human Factors Design Integration Guide. The specifications were developed by examining the best documents as identified in a previous contract with the AECB (Review of Human Factors Guidelines and Methods by W. Rhodes, I. Szlapetis et al. 1992), and a brief literature review. The best features and content were selected from existing documents and used to develop specifications for the guiding documents. The developer of the actual guides would use these specifications to produce comprehensive and consolidated documents at a later date. (author). 128 ref., 7 figs.

Specifications for human factors guiding documents

International Nuclear Information System (INIS)

Rhodes, W.; Szlapetis, I.; MacGregor, C.

1995-04-01

This report specifies the content, function and appearance of three proposed human factors guiding documents to be used by the Atomic Energy Control board and its licensees. These three guiding documents, to be developed at a later date, are: (a) Human Factors Process Guide; (b) Human Factors Activities Guide; and (c) Human Factors Design Integration Guide. The specifications were developed by examining the best documents as identified in a previous contract with the AECB (Review of Human Factors Guidelines and Methods by W. Rhodes, I. Szlapetis et al. 1992), and a brief literature review. The best features and content were selected from existing documents and used to develop specifications for the guiding documents. The developer of the actual guides would use these specifications to produce comprehensive and consolidated documents at a later date. (author). 128 ref., 7 figs

Transitioning Existing Content: inferring organisation-specific documents

Directory of Open Access Journals (Sweden)

Arijit Sengupta

2000-11-01

Full Text Available A definition for a document type within an organization represents an organizational norm about the way the organizational actors represent products and supporting evidence of organizational processes. Generating a good organization-specific document structure is, therefore, important since it can capture a shared understanding among the organizational actors about how certain business processes should be performed. Current tools that generate document type definitions focus on the underlying technology, emphasizing tags created in a single instance document. The tools, thus, fall short of capturing the shared understanding between organizational actors about how a given document type should be represented. We propose a method for inferring organization-specific document structures using multiple instance documents as inputs. The method consists of heuristics that combine individual document definitions, which may have been compiled using standard algorithms. We propose a number of heuristics utilizing artificial intelligence and natural language processing techniques. As the research progresses, the heuristics will be tested on a suite of test cases representing multiple instance documents for different document types. The complete methodology will be implemented as a research prototype

Robust Adaptive Thresholder For Document Scanning Applications

Science.gov (United States)

Hsing, To R.

1982-12-01

In document scanning applications, thresholding is used to obtain binary data from a scanner. However, due to: (1) a wide range of different color backgrounds; (2) density variations of printed text information; and (3) the shading effect caused by the optical systems, the use of adaptive thresholding to enhance the useful information is highly desired. This paper describes a new robust adaptive thresholder for obtaining valid binary images. It is basically a memory type algorithm which can dynamically update the black and white reference level to optimize a local adaptive threshold function. The results of high image quality from different types of simulate test patterns can be obtained by this algorithm. The software algorithm is described and experiment results are present to describe the procedures. Results also show that the techniques described here can be used for real-time signal processing in the varied applications.

Project managing your simulator DCS upgrade

International Nuclear Information System (INIS)

Carr, S.

2006-01-01

The intention of this paper is to provide helpful information and tips for the purchaser with regard to the project management of a DCS upgrade for an existing nuclear power station operator-training simulator. This paper was written shortly after STS Powergen completed two nuclear power station simulator DCS projects in the USA. Areas covered by this paper are: - Contractual documents and arrangements; - Licence and Escrow agreements; - Liquidated damages; - Project management; - Project schedules and resources; - Monitoring progress; - Defect reporting; - DCS automation code; - Access to proprietary information; - Tips for project meetings; - Testing; - Cultural issues; - Training

Developing Cognitive Models for Social Simulation from Survey Data

Science.gov (United States)

Alt, Jonathan K.; Lieberman, Stephen

The representation of human behavior and cognition continues to challenge the modeling and simulation community. The use of survey and polling instruments to inform belief states, issue stances and action choice models provides a compelling means of developing models and simulations with empirical data. Using these types of data to population social simulations can greatly enhance the feasibility of validation efforts, the reusability of social and behavioral modeling frameworks, and the testable reliability of simulations. We provide a case study demonstrating these effects, document the use of survey data to develop cognitive models, and suggest future paths forward for social and behavioral modeling.

IAEA activities in nuclear reactor simulation for educational purposes

International Nuclear Information System (INIS)

Badulescu, A.; Lyon, R.

2001-01-01

The International Atomic Energy Agency (IAEA) has established a programme in nuclear reactor simulation computer programs to assist its Member States in education and training. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the supply or development of simulation programs and training material, sponsors training courses and workshops, and distributes documentation and computer programs. Currently, the IAEA has simulation programs available for distribution that simulate the behaviour of BWR, PWR and HWR reactor types. (authors)

REVERSE ENGINEERING AND 3D MODELLING FOR DIGITAL DOCUMENTATION OF MARITIME HERITAGE

Directory of Open Access Journals (Sweden)

F. Menna

2012-09-01

Full Text Available heritage in general. Despite this has been stressed with emphasis, three dimensional modelling of maritime cultural heritage is still not usual as for archaeology and architecture. Three-dimensional modelling in the maritime heritage needs particular requirements. Objects to be recorded range from small replicas in maritime museums up to full-scale vessels still in operation. High geometric accuracy, photorealism of final model and faithful rendering of salient details are usually needed, together with the classical requisites characterising the 3D modelling-from-reality process, i.e. automation, low cost, reliability and flexibility of the modelling technique. In this paper, a hybrid multi-technique approach is proposed for maritime heritage preservation and, as case study, the 3D modelling of a 3-meter-long scale model of a historic warship, the "Indomito", is presented. The survey is placed in a wider project aiming to realize the virtual maritime museum of Parthenope University of Naples, for making it available to a wider public and also preserving its cultural heritage. Preliminary results are presented and discussed, highlighting relevant aspects that emerged during the experiment.

The Temptation of Documentation: Potential and Challenges of Videographic Documentation and Interpretation

Directory of Open Access Journals (Sweden)

Marie Winckler

2014-02-01

Full Text Available Insights into the civic education classroom can be gained through videographic documentation. Videographic material offers, as I argue in this article, great possibilities: Through a reconstructive approach insights into dimensions of civic education such as spatial organisation, symbolic representation and non-verbal communication may emerge. In this way, a deeper understanding of informal political learning in school can be obtained. These aspects have not yet been considered in depth with videographic documentation primarily employed to date in teacher training contexts and lesson evaluation. The case study I present here was inspired by the documentary method and both the potential and limitations of videographic interpretation are discussed in this context. The study also suggests that what is not offered by videographic documentation includes insights into the individual and collective integration of experiences in civic education lessons.

SANSMIC design document.

Energy Technology Data Exchange (ETDEWEB)

Weber, Paula D. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Rudeen, David Keith [GRAM, Inc., Albuquerque, NM (United States)

2015-07-01

The United States Strategic Petroleum Reserve (SPR) maintains an underground storage system consisting of caverns that were leached or solution mined in four salt domes located near the Gulf of Mexico in Texas and Louisiana. The SPR comprises more than 60 active caverns containing approximately 700 million barrels of crude oil. Sandia National Labo- ratories (SNL) is the geotechnical advisor to the SPR. As the most pressing need at the inception of the SPR was to create and fill storage volume with oil, the decision was made to leach the caverns and fill them simultaneously (leach-fill). Therefore, A.J. Russo developed SANSMIC in the early 1980s which allows for a transient oil-brine interface (OBI) making it possible to model leach-fill and withdrawal operations. As the majority of caverns are currently filled to storage capacity, the primary uses of SANSMIC at this time are related to the effects of small and large withdrawals, expansion of existing caverns, and projecting future pillar to diameter ratios. SANSMIC was identified by SNL as a priority candidate for qualification. This report continues the quality assurance (QA) process by documenting the "as built" mathematical and numerical models that comprise this document. The pro- gram flow is outlined and the models are discussed in detail. Code features that were added later or were not documented previously have been expounded. No changes in the code's physics have occurred since the original documentation (Russo, 1981, 1983) although recent experiments may yield improvements to the temperature and plume methods in the future.

Modeling Documents with Event Model

Directory of Open Access Journals (Sweden)

Longhui Wang

2015-08-01

Full Text Available Currently deep learning has made great breakthroughs in visual and speech processing, mainly because it draws lessons from the hierarchical mode that brain deals with images and speech. In the field of NLP, a topic model is one of the important ways for modeling documents. Topic models are built on a generative model that clearly does not match the way humans write. In this paper, we propose Event Model, which is unsupervised and based on the language processing mechanism of neurolinguistics, to model documents. In Event Model, documents are descriptions of concrete or abstract events seen, heard, or sensed by people and words are objects in the events. Event Model has two stages: word learning and dimensionality reduction. Word learning is to learn semantics of words based on deep learning. Dimensionality reduction is the process that representing a document as a low dimensional vector by a linear mode that is completely different from topic models. Event Model achieves state-of-the-art results on document retrieval tasks.

GUI-Based Document Access via SATCOMMS: Online Electronic Document Retrieval at the European Telecommunications Satellite Organization EUTELSAT.

Science.gov (United States)

Burton, Adrian P.

1995-01-01

Discusses accessing online electronic documents at the European Telecommunications Satellite Organization (EUTELSAT). Highlights include off-site paper document storage, the document management system, benefits, the EUTELSAT Standard IBM Access software, implementation, the development process, and future enhancements. (AEF)

Randomised trial comparing the recording ability of a novel, electronic emergency documentation system with the AHA paper cardiac arrest record.

Science.gov (United States)

Grigg, Eliot; Palmer, Andrew; Grigg, Jeffrey; Oppenheimer, Peter; Wu, Tim; Roesler, Axel; Nair, Bala; Ross, Brian

2014-10-01

To evaluate the ability of an electronic system created at the University of Washington to accurately document prerecorded VF and pulseless electrical activity (PEA) cardiac arrest scenarios compared with the American Heart Association paper cardiac arrest record. 16 anaesthesiology residents were randomly assigned to view one of two prerecorded, simulated VF and PEA scenarios and asked to document the event with either the paper or electronic system. Each subject then repeated the process with the other video and documentation method. Five types of documentation errors were defined: (1) omission, (2) specification, (3) timing, (4) commission and (5) noise. The mean difference in errors between the paper and electronic methods was analysed using a single factor repeated measures ANOVA model. Compared with paper records, the electronic system omitted 6.3 fewer events (95% CI -10.1 to -2.5, p=0.003), which represents a 28% reduction in omission errors. Users recorded 2.9 fewer noise items (95% CI -5.3 to -0.6, p=0.003) when compared with paper, representing a 36% decrease in redundant or irrelevant information. The rate of timing (Δ=-3.2, 95% CI -9.3 to 3.0, p=0.286) and commission (Δ=-4.4, 95% CI -9.4 to 0.5, p=0.075) errors were similar between the electronic system and paper, while the rate of specification errors were about a third lower for the electronic system when compared with the paper record (Δ=-3.2, 95% CI -6.3 to -0.2, p=0.037). Compared with paper documentation, documentation with the electronic system captured 24% more critical information during a simulated medical emergency without loss in data quality. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

A Hands-on Approach to Evolutionary Simulation

DEFF Research Database (Denmark)

Valente, Marco; Andersen, Esben Sloth

2002-01-01

in an industry (or an economy). To abbreviate we call such models NelWin models. The new system for the programming and simulation of such models is called the Laboratory for simulation development - abbreviated as Lsd. The paper is meant to allow readers to use the Lsd version of a basic NelWin model: observe...... the model content, run the simulation, interpret the results, modify the parameterisation, etc. Since the paper deals with the implementation of a fairly complex set of models in a fairly complex programming and simulation system, it does not contain full documentation of NelWin and Lsd. Instead we hope...... to give the reader a first introduction to NelWin and Lsd and inspire a further exploration of them....

Functional Decomposition of Modeling and Simulation Terrain Database Generation Process

National Research Council Canada - National Science Library

Yakich, Valerie R; Lashlee, J. D

2008-01-01

.... This report documents the conceptual procedure as implemented by Lockheed Martin Simulation, Training, and Support and decomposes terrain database construction using the Integration Definition for Function Modeling (IDEF...

Personalized Metaheuristic Clustering Onto Web Documents

Institute of Scientific and Technical Information of China (English)

Wookey Lee

2004-01-01

Optimal clustering for the web documents is known to complicated cornbinatorial Optimization problem and it is hard to develop a generally applicable oplimal algorithm. An accelerated simuIated arlneaIing aIgorithm is developed for automatic web document classification. The web document classification problem is addressed as the problem of best describing a match between a web query and a hypothesized web object. The normalized term frequency and inverse document frequency coefficient is used as a measure of the match. Test beds are generated on - line during the search by transforming model web sites. As a result, web sites can be clustered optimally in terms of keyword vectofs of corresponding web documents.

Detector Simulation: Data Treatment and Analysis Methods

CERN Document Server

Apostolakis, J

2011-01-01

Detector Simulation in 'Data Treatment and Analysis Methods', part of 'Landolt-Börnstein - Group I Elementary Particles, Nuclei and Atoms: Numerical Data and Functional Relationships in Science and Technology, Volume 21B1: Detectors for Particles and Radiation. Part 1: Principles and Methods'. This document is part of Part 1 'Principles and Methods' of Subvolume B 'Detectors for Particles and Radiation' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the Section '4.1 Detector Simulation' of Chapter '4 Data Treatment and Analysis Methods' with the content: 4.1 Detector Simulation 4.1.1 Overview of simulation 4.1.1.1 Uses of detector simulation 4.1.2 Stages and types of simulation 4.1.2.1 Tools for event generation and detector simulation 4.1.2.2 Level of simulation and computation time 4.1.2.3 Radiation effects and background studies 4.1.3 Components of detector simulation 4.1.3.1 Geometry modeling 4.1.3.2 External fields 4.1.3.3 Intro...

10 CFR 21.31 - Procurement documents.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Procurement documents. 21.31 Section 21.31 Energy NUCLEAR REGULATORY COMMISSION REPORTING OF DEFECTS AND NONCOMPLIANCE Procurement Documents § 21.31 Procurement documents. Each individual, corporation, partnership, dedicating entity, or other entity subject to the...

Developing a fast simulator for irradiated silicon detectors

CERN Document Server

Diez Gonzalez-Pardo, Alvaro

2015-01-01

Simulation software for irradiated silicon detectors has been developed on the basis of an already existing C++ simulation software called TRACS[1]. This software has been already proven useful in understanding non-irradiated silicon diodes and microstrips. In addition a wide variety of user-focus features has been implemented to improve on TRACS flexibility. Such features include an interface to allow any program to leverage TRACS functionalities, a configuration file and improved documentation.

The Rebound Effect: A Simulation Model of Telecommuting

OpenAIRE

Reitan, Fredrik Aadne

2014-01-01

This thesis aims to highlight the relationship between telecommuting and the rebound effect with respect to greenhouse gas emissions. This was done by gathering and analyzing the latest research from various fields that could provide information about telecommuting and the rebound effect. By surveying these fields, an informative and well-documented framework for modeling telecommuting and the rebound effect was made possible. The simulation model simulated the adoption of telecommuting in Lo...

Reliable planning and monitoring tools by dismantling 3D photographic image of high resolution and document management systems. Application MEDS system

International Nuclear Information System (INIS)

Vela Morales, F.

2010-01-01

MEDS system (Metric Environment Documentation System) is a method developed by CT3 based engineering documentation generation metric of a physical environment using measurement tools latest technology and high precision, such as the Laser Scanner. With this equipment it is possible to obtain three-dimensional information of a physical environment through the 3D coordinates of millions of points. This information is processed by software that is very useful tool for modeling operations and 3D simulations.

Document flow segmentation for business applications

Science.gov (United States)

Daher, Hani; Belaïd, Abdel

2013-12-01

The aim of this paper is to propose a document flow supervised segmentation approach applied to real world heterogeneous documents. Our algorithm treats the flow of documents as couples of consecutive pages and studies the relationship that exists between them. At first, sets of features are extracted from the pages where we propose an approach to model the couple of pages into a single feature vector representation. This representation will be provided to a binary classifier which classifies the relationship as either segmentation or continuity. In case of segmentation, we consider that we have a complete document and the analysis of the flow continues by starting a new document. In case of continuity, the couple of pages are assimilated to the same document and the analysis continues on the flow. If there is an uncertainty on whether the relationship between the couple of pages should be classified as a continuity or segmentation, a rejection is decided and the pages analyzed until this point are considered as a "fragment". The first classification already provides good results approaching 90% on certain documents, which is high at this level of the system.

Traceability Method for Software Engineering Documentation

OpenAIRE

Nur Adila Azram; Rodziah Atan

2012-01-01

Traceability has been widely discussed in research area. It has been one of interest topic to be research in software engineering. Traceability in software documentation is one of the interesting topics to be research further. It is important in software documentation to trace out the flow or process in all the documents whether they depends with one another or not. In this paper, we present a traceability method for software engineering documentation. The objective of this research is to fac...

Areva - 2011 Reference document; Areva - Document de reference 2011

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

After having indicated the person responsible of this document and the legal account auditors, and provided some financial information, this document gives an overview of the different risk factors existing in the company: law risks, industrial and environmental risks, operational risks, risks related to large projects, market and liquidity risks. Then, after having recalled the history and evolution of the company and the evolution of its investments over the last five years, it proposes an overview of Areva's activities on the markets of nuclear energy and renewable energies, of its clients and suppliers, of its strategy, of the activities of its different departments. Other information are provided: company's flow chart, estate properties (plants, equipment), an analysis of its financial situation, its research and development policy, the present context, profit previsions or estimations, management organization and operation

Document image analysis: A primer

Indian Academy of Sciences (India)

R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

(1) Typical documents in today's office are computer-generated, but even so, inevitably by different computers and ... different sizes, from a business card to a large engineering drawing. Document analysis ... Whether global or adaptive ...

Are PDF Documents Accessible?

Directory of Open Access Journals (Sweden)

Mireia Ribera Turró

2008-09-01

Full Text Available Adobe PDF is one of the most widely used formats in scientific communications and in administrative documents. In its latest versions it has incorporated structural tags and improvements that increase its level of accessibility. This article reviews the concept of accessibility in the reading of digital documents and evaluates the accessibility of PDF according to the most widely established standards.

A document processing pipeline for annotating chemical entities in scientific documents.

Science.gov (United States)

Campos, David; Matos, Sérgio; Oliveira, José L

2015-01-01

The recognition of drugs and chemical entities in text is a very important task within the field of biomedical information extraction, given the rapid growth in the amount of published texts (scientific papers, patents, patient records) and the relevance of these and other related concepts. If done effectively, this could allow exploiting such textual resources to automatically extract or infer relevant information, such as drug profiles, relations and similarities between drugs, or associations between drugs and potential drug targets. The objective of this work was to develop and validate a document processing and information extraction pipeline for the identification of chemical entity mentions in text. We used the BioCreative IV CHEMDNER task data to train and evaluate a machine-learning based entity recognition system. Using a combination of two conditional random field models, a selected set of features, and a post-processing stage, we achieved F-measure results of 87.48% in the chemical entity mention recognition task and 87.75% in the chemical document indexing task. We present a machine learning-based solution for automatic recognition of chemical and drug names in scientific documents. The proposed approach applies a rich feature set, including linguistic, orthographic, morphological, dictionary matching and local context features. Post-processing modules are also integrated, performing parentheses correction, abbreviation resolution and filtering erroneous mentions using an exclusion list derived from the training data. The developed methods were implemented as a document annotation tool and web service, freely available at http://bioinformatics.ua.pt/becas-chemicals/.

A General Model of Dioxin Contamination in Breast Milk: Results from a Study on 94 Women from the Caserta and Naples Areas in Italy

Science.gov (United States)

Rivezzi, Gaetano; Piscitelli, Prisco; Scortichini, Giampiero; Giovannini, Armando; Diletti, Gianfranco; Migliorati, Giacomo; Ceci, Roberta; Rivezzi, Giulia; Cirasino, Lorenzo; Carideo, Pietro; Black, Dennis M.; Garzillo, Carmine; Giani, Umberto

2013-01-01

Background: The Caserta and Naples areas in Campania Region experience heavy environmental contamination due to illegal waste disposal and burns, thus representing a valuable setting to develop a general model of human contamination with dioxins (PCDDs-PCDFs) and dioxin-like-PCBs (dl-PCBs). Methods: 94 breastfeeding women (aged 19–32 years; mean age 27.9 ± 3.0) were recruited to determine concentrations of PCDDs-PCDFs and dl-PCBs in their milk. Individual milk samples were collected and analyzed according to standard international procedures. A generalized linear model was used to test potential predictors of pollutant concentration in breast milk: age, exposure to waste fires, cigarette smoking, diet, and residence in high/low risk area (defined at high/low environmental pressure by a specific 2007 WHO report). A Structural Equation Model (SEM) analysis was carried out by taking into account PCDDs-PCDFs and dl-PCBs as endogenous variables and age, waste fires, risk area and smoking as exogenous variables. Results: All milk samples were contaminated by PCDDs-PCDFs (8.6 pg WHO-TEQ/98g fat ± 2.7; range 3.8–19) and dl-PCBs (8.0 pg WHO-TEQ/98g fat ± 3.7; range 2.5–24), with their concentrations being associated with age and exposure to waste fires (p dioxins concentrations in people living in low risk areas than those from high risk areas (p Dioxins concentration in women living in areas classified at low environmental pressure in 2007 WHO report was significantly influenced by exposure to burns. PMID:24217180

10 CFR 71.113 - Document control.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Document control. 71.113 Section 71.113 Energy NUCLEAR....113 Document control. The licensee, certificate holder, and applicant for a CoC shall establish measures to control the issuance of documents such as instructions, procedures, and drawings, including...

Gesti convenzionali e arte mimica nell’Ottocento italiano

Directory of Open Access Journals (Sweden)

Noemi Massari

2015-03-01

Full Text Available The present essay aims at reviewing the issues and methodologies faced in my PhD research. The first step will be the analysis of the theoretical assumptions that underlie the emergence of ballet pantomime and the rediscovery of classical pantomime. The essay will proceed outlining the artistic and cultural landscapes of the two Italian cities examined, Milan and Naples, aiming at defining, from a didactic viewpoint, the teaching of pantomime in the two largest Italian academies, the Teatro alla Scala in Milan and the Teatro di San Carlo in Naples. The third step will be the recording of the few references to the mime art contained in the treaties and documents relating to the dance in Italy during the Nineteenth century (Carlo Blasis, Vincenzo Buonsignori, Giulio Pompeo Ferrario. These references will be compared to the major mime treatises for actors (Giovanni Emanuele Bideri, Antonio Morrocchesi, Angelo Canova, Alemanno Morelli and opera singers (Manuel Garcia, Fernando Pelzet, Leone Giraldoni, Enrico Serafino Torelli, Augusto Delle Sedie in order to analyze the development of gesture during the Nineteenth century and the different use that each interpreter did of the expressive mime.

10 CFR 72.152 - Document control.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Document control. 72.152 Section 72.152 Energy NUCLEAR... Document control. The licensee, applicant for a license, certificate holder, and applicant for a CoC shall establish measures to control the issuance of documents such as instructions, procedures, and drawings...

Let Documents Talk to Each Other: A Computer Model for Connection of Short Documents.

Science.gov (United States)

Chen, Z.

1993-01-01

Discusses the integration of scientific texts through the connection of documents and describes a computer model that can connect short documents. Information retrieval and artificial intelligence are discussed; a prototype system of the model is explained; and the model is compared to other computer models. (17 references) (LRW)

Gestión documental, febrero 2010

OpenAIRE

Bustelo Ruesta, Carlota; García Morales, Elisa

2010-01-01

La gestió documental té com a finalitat assegurar una atenció adequada als documents creats, rebuts o gestionats per una organització com a prova de les activitats realitzades, preservant-los durant el temps què sigui necessari. Aquesta assignatura pretén proporcionar els coneixements teòrics i pràctics necessaris per a analitzar, dissenyar i implementar un sistema de gestió documental. Per aquesta raó, es centra en la gestió dels documents que una organització manté com a resultat dels seus ...

Digital watermarks in electronic document circulation

Directory of Open Access Journals (Sweden)

Vitaliy Grigorievich Ivanenko

2017-07-01

Full Text Available This paper reviews different protection methods for electronic documents, their good and bad qualities. Common attacks on electronic documents are analyzed. Digital signature and ways of eliminating its flaws are studied. Different digital watermark embedding methods are described, they are divided into 2 types. The solution to protection of electronic documents is based on embedding digital watermarks. Comparative analysis of this methods is given. As a result, the most convenient method is suggested – reversible data hiding. It’s remarked that this technique excels at securing the integrity of the container and its digital watermark. Digital watermark embedding system should prevent illegal access to the digital watermark and its container. Digital watermark requirements for electronic document protection are produced. Legal aspect of copyright protection is reviewed. Advantages of embedding digital watermarks in electronic documents are produced. Modern reversible data hiding techniques are studied. Distinctive features of digital watermark use in Russia are highlighted. Digital watermark serves as an additional layer of defense, that is in most cases unknown to the violator. With an embedded digital watermark, it’s impossible to misappropriate the authorship of the document, even if the intruder signs his name on it. Therefore, digital watermarks can act as an effective additional tool to protect electronic documents.

Radiocarbon dating of ancient Japanese documents

International Nuclear Information System (INIS)

Oda, H.

2001-01-01

History is a reconstruction of past human activity, evidence of which is remained in the form of documents or relics. For the reconstruction of historic period, the radiocarbon dating of ancient documents provides important information. Although radiocarbon age is converted into calendar age with the calibration curve, the calibrated radiocarbon age is still different from the historical age when the document was written. The difference is known as 'old wood effect' for wooden cultural property. The discrepancy becomes more serious problem for recent sample which requires more accurate age determination. Using Tandetron accelerator mass spectrometer at Nagoya University, we have measured radiocarbon ages of Japanese ancient documents, sutras and printed books written dates of which are clarified from the paleographic standpoint. The purpose is to clarify the relation between calibrated radiocarbon age and historical age of ancient Japanese document by AMS radiocarbon dating. This paper reports 23 radiocarbon ages of ancient Japanese documents, sutras and printed books. The calibrated radiocarbon ages are in good agreement with the corresponding historical ages. It was shown by radiocarbon dating of the ancient documents that Japanese paper has little gap by 'old wood effect'; accordingly, ancient Japanese paper is a suitable sample for radiocarbon dating of recent historic period. (author)

AREVA 2009 reference document; AREVA document de reference 2009

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

This Reference Document contains information on the AREVA group's objectives, prospects and development strategies. It contains information on the markets, market shares and competitive position of the AREVA group. This information provides an adequate picture of the size of these markets and of the AREVA group's competitive position. Content: 1 - Person responsible for the Reference Document and Attestation by the person responsible for the Reference Document; 2 - Statutory and Deputy Auditors; 3 - Selected financial information; 4 - Risks: Risk management and coverage, Legal risk, Industrial and environmental risk, Operating risk, Risk related to major projects, Liquidity and market risk, Other risk; 5 - Information about the issuer: History and development, Investments; 6 - Business overview: Markets for nuclear power and renewable energies, AREVA customers and suppliers, Overview and strategy of the group, Business divisions, Discontinued operations: AREVA Transmission and Distribution; 7 - Organizational structure; 8 - Property, plant and equipment: Principal sites of the AREVA group, Environmental issues that may affect the issuer's; 9 - Analysis of and comments on the group's financial position and performance: Overview, Financial position, Cash flow, Statement of financial position, Events subsequent to year-end closing for 2009; 10 - Capital Resources; 11 - Research and development programs, patents and licenses; 12 -trend information: Current situation, Financial objectives; 13 - Profit forecasts or estimates; 14 - Administrative, management and supervisory bodies and senior management; 15 - Compensation and benefits; 16 - Functioning of corporate bodies; 17 - Employees; 18 - Principal shareholders; 19 - Transactions with related parties: French state, CEA, EDF group; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information: Share capital, Certificate of incorporation and

14 CFR 406.113 - Filing documents with the Docket Management System (DMS) and sending documents to the...

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Filing documents with the Docket Management System (DMS) and sending documents to the administrative law judge and Assistant Chief Counsel for... Management System (DMS) and sending documents to the administrative law judge and Assistant Chief Counsel for...

Recommended documentation for computer users at ANL

Energy Technology Data Exchange (ETDEWEB)

Heiberger, A.A.

1992-04-01

Recommended Documentation for Computer Users at ANL is for all users of the services available from the Argonne National Laboratory (ANL) Computing and Telecommunications Division (CTD). This document will guide you in selecting available documentation that will best fill your particular needs. Chapter 1 explains how to use this document to select documents and how to obtain them from the CTD Document Distribution Counter. Chapter 2 contains a table that categorizes available publications. Chapter 3 gives descriptions of the online DOCUMENT command for CMS, and VAX, and the Sun workstation. DOCUMENT allows you to scan for and order documentation that interests you. Chapter 4 lists publications by subject. Categories I and IX cover publications of a general nature and publications on telecommunications and networks respectively. Categories II, III, IV, V, VI, VII, VIII, and X cover publications on specific computer systems. Category XI covers publications on advanced scientific computing at Argonne. Chapter 5 contains abstracts for each publication, all arranged alphabetically. Chapter 6 describes additional publications containing bibliographies and master indexes that the user may find useful. The appendix identifies available computer systems, applications, languages, and libraries.

Mined Geologic Disposal System Requirements Document

International Nuclear Information System (INIS)

1993-01-01

This Mined Geologic Disposal System Requirements document (MGDS-RD) describes the functions to be performed by, and the requirements for, a Mined Geologic Disposal System (MGDS) for the permanent disposal of spent nuclear fuel (SNF) and commercial and defense high level radioactive waste (HLW) in support of the Civilian Radioactive Waste Management System (CRWMS). The development and control of the MGDS-RD is quality-affecting work and is subject to the Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance Requirements Document (QARD). As part of the technical requirements baseline, it is also subject to Baseline Management Plan controls. The MGDS-RD and the other program-level requirements documents have been prepared and managed in accordance with the Technical Document Preparation Plan (TDPP) for the Preparation of System Requirements Documents

XML documents cluster research based on frequent subpatterns

Science.gov (United States)

Ding, Tienan; Li, Wei; Li, Xiongfei

2015-12-01

XML data is widely used in the information exchange field of Internet, and XML document data clustering is the hot research topic. In the XML document clustering process, measure differences between two XML documents is time costly, and impact the efficiency of XML document clustering. This paper proposed an XML documents clustering method based on frequent patterns of XML document dataset, first proposed a coding tree structure for encoding the XML document, and translate frequent pattern mining from XML documents into frequent pattern mining from string. Further, using the cosine similarity calculation method and cohesive hierarchical clustering method for XML document dataset by frequent patterns. Because of frequent patterns are subsets of the original XML document data, so the time consumption of XML document similarity measure is reduced. The experiment runs on synthetic dataset and the real datasets, the experimental result shows that our method is efficient.

48 CFR 1415.406 - Documentation.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Documentation. 1415.406 Section 1415.406 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Contract Pricing 1415.406 Documentation. ...

Designing Documents for People to Use

Directory of Open Access Journals (Sweden)

David Sless

Full Text Available This article reports on the work of Communication Research Institute (CRI, an international research center specializing in communication and information design. With the support of government, regulators, industry bodies, and business—and with the participation of people and their advocates—CRI has worked on over 200 public document design projects since it began as a small unit in 1985. CRI investigates practical methods and achievable standards for designing digital and paper public documents, including forms; workplace procedural notices; bills, letters, and emails sent by organizations; labels and instructions that accompany products and services; and legal and financial documents and contracts. CRI has written model grammars for the document types it designs, and the cumulative data from CRI projects has led to a set of systematic methods for designing public-use documents to a high standard. Through research, design, publishing, and advocacy, CRI works to measurably improve the ordinary documents we all have to use. Keywords: Information design, Design methods, Design standards, Communication design, Design diagnostic testing, Design research

Documentation of spectrom-41

International Nuclear Information System (INIS)

Svalstad, D.K.

1989-01-01

SPECTROM-41 is a finite element heat transfer computer program developed to analyze thermal problems related to nuclear waste disposal. The code is part of the SPECTROM (Special Purpose Engineering Codes for Thermal/ROck Mechanics) series of special purpose finite element programs that are continually being developed by RE/SPEC Inc. (RSI) to address the many unique formations. This document presents the theoretical basis for the mathematical model, the finite element formulation of the program, and a description of the input data for the program, along with details about program support and continuing documentation. The documentation is intended to satisfy the requirements and guidelines outlined in NUREG-0856. The principal component model used in the programs based on Fourier's law of conductance. Numerous program options provide the capability of considering various boundary conditions, material stratification and anisotropy, and time-dependent heat generation that are characteristic of problems involving the disposal of nuclear waste in geologic formation. Numerous verification problems are included in the documentation in addition to highlights of past and ongoing verification and validation efforts. A typical repository problem is solving using SPECTROM-41 to demonstrate the use of the program in addressing problems related to the disposal of nuclear waste

Extremely secure identification documents

International Nuclear Information System (INIS)

Tolk, K.M.; Bell, M.

1997-09-01

The technology developed in this project uses biometric information printed on the document and public key cryptography to ensure that an adversary cannot issue identification documents to unauthorized individuals or alter existing documents to allow their use by unauthorized individuals. This process can be used to produce many types of identification documents with much higher security than any currently in use. The system is demonstrated using a security badge as an example. This project focused on the technologies requiring development in order to make the approach viable with existing badge printing and laminating technologies. By far the most difficult was the image processing required to verify that the picture on the badge had not been altered. Another area that required considerable work was the high density printed data storage required to get sufficient data on the badge for verification of the picture. The image processing process was successfully tested, and recommendations are included to refine the badge system to ensure high reliability. A two dimensional data array suitable for printing the required data on the badge was proposed, but testing of the readability of the array had to be abandoned due to reallocation of the budgeted funds by the LDRD office

UNSAT-H, an unsaturated soil water flow code for use at the Hanford site: code documentation

International Nuclear Information System (INIS)

Fayer, M.J.; Gee, G.W.

1985-10-01

The unsaturated soil moisture flow code, UNSAT-H, which was developed at Pacific Northwest Laboratory for assessing water movement at waste sites on the Hanford site, is documented in this report. This code is used in simulating the water dynamics of arid sites under consideration for waste disposal. The results of an example simulation of constant infiltration show excellent agreement with an analytical solution and another numerical solution, thus providing some verification of the UNSAT-H code. Areas of the code are identified for future work and include runoff, snowmelt, long-term climate and plant models, and parameter measurement. 29 refs., 7 figs., 2 tabs

Use of an advanced document system in post-refuelling updating of nuclear power plant documentation

International Nuclear Information System (INIS)

Puech Suanzes, P.; Cortes Soler, M.

1993-01-01

This paper discusses the results of the extensive use of an advanced document system to update documentation prepared by traditional methods and affected by changes in the period between two plant refuellings. The implementation of a system for the capture, retrieval and storage of drawings using optical discs is part of a plan to modernize production and management tools and to thus achieve better control of document configuration. These processes are consequently optimized in that: 1. The deterioration of drawings is detained with the help of an identical, updated, legible, reliable support for all users. 2. The time required to update documentation is reduced. Given the large number of drawings, the implementation method should effectively combine costs and time. The document management tools ensure optical disc storage control so that from the moment a drawing resides in the system, any modification to it is made through the system utilities, thus ensuring quality and reducing schedules. The system described was used to update the electrical drawings of Almaraz Nuclear Power Plant. Changes made during the eighth refuelling of Unit I were incorporated and the time needed to issue the updated drawings was reduced by one month. (author)

A metadata catalog for organization and systemization of fusion simulation data

International Nuclear Information System (INIS)

Greenwald, M.; Fredian, T.; Schissel, D.; Stillerman, J.

2012-01-01

Highlights: ► We find that modeling and simulation data need better systemization. ► Workflow, data provenance and relations among data items need to be captured. ► We have begun a design for a simulation metadata catalog that meets these needs. ► The catalog design also supports creation of science notebooks for simulation. - Abstract: Careful management of data and associated metadata is a critical part of any scientific enterprise. Unfortunately, most current fusion simulation efforts lack systematic, project-wide organization of their data. This paper describes an approach to managing simulation data through creation of a comprehensive metadata catalog, currently under development. The catalog is intended to document all past and current simulation activities (including data provenance); to enable global data location and to facilitate data access, analysis and visualization through uniform provision of metadata. The catalog will capture workflow, holding entries for each simulation activity including, at least, data importing and staging, data pre-processing and input preparation, code execution, data storage, post-processing and exporting. The overall aim is that between the catalog and the main data archive, the system would hold a complete and accessible description of the data, all of its attributes and the processes used to generate the data. The catalog will describe data collections, including those representing simulation workflows as well as any other useful groupings. Finally it would be populated with user supplied comments to explain the motivation and results of any activity documented by the catalog.

Technical basis document for external events

International Nuclear Information System (INIS)

OBERG, B.D.

2003-01-01

This document supports the Tank Farms Documented Safety Analysis and presents the technical basis for the FR-equencies of externally initiated accidents. The consequences of externally initiated events are discussed in other documents that correspond to the accident that was caused by the external event. The external events include aircraft crash, vehicle accident, range fire, and rail accident

Building America House Simulation Protocols

Energy Technology Data Exchange (ETDEWEB)

Hendron, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Engebrecht, Cheryn [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2010-09-01

The House Simulation Protocol document was developed to track and manage progress toward Building America's multi-year, average whole-building energy reduction research goals for new construction and existing homes, using a consistent analytical reference point. This report summarizes the guidelines for developing and reporting these analytical results in a consistent and meaningful manner for all home energy uses using standard operating conditions.

User's guide of DETRAS system-3. Description of the simulated reactor plant

International Nuclear Information System (INIS)

Yamaguchi, Yukichi

2006-12-01

DETRAS system is a PWR reactor simulator system for operation trainings whose distinguished feature is that it can be operated from the remote place of the simulator site. The document which is the third one of a series of three volumes of the user's guide of DETRAS, describes firstly an outline of the simulated reactor system then a user's interface needed for operation of the simulator of interest and finally a series of procedure for startup of the simulated reactor and shutdown of it from its rated operation state. (author)

ENDF/B summary documentation

International Nuclear Information System (INIS)

Garber, D.

1975-10-01

Descriptions of the evaluations contained in the ENDF/B library are given. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer-readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The documentations were written by the CSEWG evaluators and compiled by NNCSC. Selected materials which comprise this volume include from 1 H to 244 Cm

SIMONE: Tool for Data Analysis and Simulation

International Nuclear Information System (INIS)

Chudoba, V.; Hnatio, B.; Sharov, P.; Papka, Paul

2013-06-01

SIMONE is a software tool based on the ROOT Data Analysis Framework and developed in collaboration of FLNR JINR and iThemba LABS. It is intended for physicists planning experiments and analysing experimental data. The goal of the SIMONE framework is to provide a flexible system, user friendly, efficient and well documented. It is intended for simulation of a wide range of Nuclear Physics experiments. The most significant conditions and physical processes can be taken into account during simulation of the experiment. The user can create his own experimental setup through the access of predefined detector geometries. Simulated data is made available in the same format as for the real experiment for identical analysis of both experimental and simulated data. Significant time reduction is expected during experiment planning and data analysis. (authors)

CAED Document Repository

Data.gov (United States)

U.S. Environmental Protection Agency — Compliance Assurance and Enforcement Division Document Repository (CAEDDOCRESP) provides internal and external access of Inspection Records, Enforcement Actions, and...

A Cognitive Model of Document Use during a Research Project. Study I. Document Selection.

Science.gov (United States)

Wang, Peiling; Soergel, Dagobert

1998-01-01

Proposes a model of document selection by real users of a bibliographic retrieval system. Reports on Part I of a longitudinal study of decision making on document use by academics (25 faculty and graduate students in Agricultural Economics). Examines what components are relevant to the users' decisions and what cognitive process may have occurred…

Document reconstruction by layout analysis of snippets

Science.gov (United States)

Kleber, Florian; Diem, Markus; Sablatnig, Robert

2010-02-01

Document analysis is done to analyze entire forms (e.g. intelligent form analysis, table detection) or to describe the layout/structure of a document. Also skew detection of scanned documents is performed to support OCR algorithms that are sensitive to skew. In this paper document analysis is applied to snippets of torn documents to calculate features for the reconstruction. Documents can either be destroyed by the intention to make the printed content unavailable (e.g. tax fraud investigation, business crime) or due to time induced degeneration of ancient documents (e.g. bad storage conditions). Current reconstruction methods for manually torn documents deal with the shape, inpainting and texture synthesis techniques. In this paper the possibility of document analysis techniques of snippets to support the matching algorithm by considering additional features are shown. This implies a rotational analysis, a color analysis and a line detection. As a future work it is planned to extend the feature set with the paper type (blank, checked, lined), the type of the writing (handwritten vs. machine printed) and the text layout of a snippet (text size, line spacing). Preliminary results show that these pre-processing steps can be performed reliably on a real dataset consisting of 690 snippets.

Retrieval process development and enhancements waste simulant compositions and defensibility

International Nuclear Information System (INIS)

Powell, M.R.; Golcar, G.R.; Geeting, J.G.H.

1997-09-01

The purpose of this report is to document the physical waste simulant development efforts of the EM-50 Tanks Focus Area at the Hanford Site. Waste simulants are used in the testing and development of waste treatment and handling processes because performing such tests using actual tank waste is hazardous and prohibitively expensive. This document addresses the simulant development work that supports the testing of waste retrieval processes using simulants that mimic certain key physical properties of the tank waste. Development and testing of chemical simulants are described elsewhere. This work was funded through the EM-50 Tanks Focus Area as part of the Retrieval Process Development and Enhancements (RPD ampersand E) Project at the Pacific Northwest National Laboratory (PNNL). The mission of RPD ampersand E is to understand retrieval processes, including emerging and existing processes, gather performance data on those processes, and relate the data to specific tank problems to provide end users with the requisite technical bases to make retrieval and closure decisions. Physical simulants are prepared using relatively nonhazardous and inexpensive materials rather than the chemicals known to be in tank waste. Consequently, only some of the waste properties are matched by the simulant. Deciding which properties need to be matched and which do not requires a detailed knowledge of the physics of the process to be tested using the simulant. Developing this knowledge requires reviews of available literature, consultation with experts, and parametric tests. Once the relevant properties are identified, waste characterization data are reviewed to establish the target ranges for each property. Simulants are then developed that possess the desired ranges of properties

HSimulator: Hybrid Stochastic/Deterministic Simulation of Biochemical Reaction Networks

Directory of Open Access Journals (Sweden)

Luca Marchetti

2017-01-01

Full Text Available HSimulator is a multithread simulator for mass-action biochemical reaction systems placed in a well-mixed environment. HSimulator provides optimized implementation of a set of widespread state-of-the-art stochastic, deterministic, and hybrid simulation strategies including the first publicly available implementation of the Hybrid Rejection-based Stochastic Simulation Algorithm (HRSSA. HRSSA, the fastest hybrid algorithm to date, allows for an efficient simulation of the models while ensuring the exact simulation of a subset of the reaction network modeling slow reactions. Benchmarks show that HSimulator is often considerably faster than the other considered simulators. The software, running on Java v6.0 or higher, offers a simulation GUI for modeling and visually exploring biological processes and a Javadoc-documented Java library to support the development of custom applications. HSimulator is released under the COSBI Shared Source license agreement (COSBI-SSLA.

Xyce Parallel Electronic Simulator Reference Guide Version 6.4

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mei, Ting [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Russo, Thomas V. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schiek, Richard [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sholander, Peter E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Thornquist, Heidi K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Verley, Jason [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Baur, David Gregory [Raytheon, Albuquerque, NM (United States)

2015-12-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users' Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce . This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users' Guide [1] . Trademarks The information herein is subject to change without notice. Copyright c 2002-2015 Sandia Corporation. All rights reserved. Xyce TM Electronic Simulator and Xyce TM are trademarks of Sandia Corporation. Portions of the Xyce TM code are: Copyright c 2002, The Regents of the University of California. Produced at the Lawrence Livermore National Laboratory. Written by Alan Hindmarsh, Allan Taylor, Radu Serban. UCRL-CODE-2002-59 All rights reserved. Orcad, Orcad Capture, PSpice and Probe are registered trademarks of Cadence Design Systems, Inc. Microsoft, Windows and Windows 7 are registered trademarks of Microsoft Corporation. Medici, DaVinci and Taurus are registered trademarks of Synopsys Corporation. Amtec and TecPlot are trademarks of Amtec Engineering, Inc. Xyce 's expression library is based on that inside Spice 3F5 developed by the EECS Department at the University of California. The EKV3 MOSFET model was developed by the EKV Team of the Electronics Laboratory-TUC of the Technical University of Crete. All other trademarks are property of their respective owners. Contacts Bug Reports (Sandia only) http://joseki.sandia.gov/bugzilla http://charleston.sandia.gov/bugzilla World Wide Web http://xyce.sandia.gov http://charleston.sandia.gov/xyce (Sandia only) Email xyce@sandia.gov (outside Sandia) xyce-sandia@sandia.gov (Sandia only)

Document image database indexing with pictorial dictionary

Science.gov (United States)

Akbari, Mohammad; Azimi, Reza

2010-02-01

In this paper we introduce a new approach for information retrieval from Persian document image database without using Optical Character Recognition (OCR).At first an attribute called subword upper contour label is defined then, a pictorial dictionary is constructed based on this attribute for the subwords. By this approach we address two issues in document image retrieval: keyword spotting and retrieval according to the document similarities. The proposed methods have been evaluated on a Persian document image database. The results have proved the ability of this approach in document image information retrieval.

Document Organization Using Kohonen's Algorithm.

Science.gov (United States)

Guerrero Bote, Vicente P.; Moya Anegon, Felix de; Herrero Solana, Victor

2002-01-01

Discussion of the classification of documents from bibliographic databases focuses on a method of vectorizing reference documents from LISA (Library and Information Science Abstracts) which permits their topological organization using Kohonen's algorithm. Analyzes possibilities of this type of neural network with respect to the development of…

Contextualizing Data Warehouses with Documents

DEFF Research Database (Denmark)

Perez, Juan Manuel; Berlanga, Rafael; Aramburu, Maria Jose

2008-01-01

warehouse with a document warehouse, resulting in a contextualized warehouse. Thus, the user first selects an analysis context by supplying some keywords. Then, the analysis is performed on a novel type of OLAP cube, called an R-cube, which is materialized by retrieving and ranking the documents...

Piles, tabs and overlaps in navigation among documents

DEFF Research Database (Denmark)

Jakobsen, Mikkel Rønne; Hornbæk, Kasper

2010-01-01

Navigation among documents is a frequent, but ill supported activity. Overlapping or tabbed documents are widespread, but they offer limited visibility of their content. We explore variations on navigation support: arranging documents with tabs, as overlapping windows, and in piles. In an experim......Navigation among documents is a frequent, but ill supported activity. Overlapping or tabbed documents are widespread, but they offer limited visibility of their content. We explore variations on navigation support: arranging documents with tabs, as overlapping windows, and in piles....... In an experiment we compared 11 participants’ navigation with these variations and found strong task effects. Overall, overlapping windows were preferred and their structured layout worked well with some tasks. Surprisingly, tabbed documents were efficient in tasks requiring simply finding a document. Piled...... on document navigation and its support by piling....

Segmentation of complex document

Directory of Open Access Journals (Sweden)

Souad Oudjemia

2014-06-01

Full Text Available In this paper we present a method for segmentation of documents image with complex structure. This technique based on GLCM (Grey Level Co-occurrence Matrix used to segment this type of document in three regions namely, 'graphics', 'background' and 'text'. Very briefly, this method is to divide the document image, in block size chosen after a series of tests and then applying the co-occurrence matrix to each block in order to extract five textural parameters which are energy, entropy, the sum entropy, difference entropy and standard deviation. These parameters are then used to classify the image into three regions using the k-means algorithm; the last step of segmentation is obtained by grouping connected pixels. Two performance measurements are performed for both graphics and text zones; we have obtained a classification rate of 98.3% and a Misclassification rate of 1.79%.

Vietnamese Document Representation and Classification

Science.gov (United States)

Nguyen, Giang-Son; Gao, Xiaoying; Andreae, Peter

Vietnamese is very different from English and little research has been done on Vietnamese document classification, or indeed, on any kind of Vietnamese language processing, and only a few small corpora are available for research. We created a large Vietnamese text corpus with about 18000 documents, and manually classified them based on different criteria such as topics and styles, giving several classification tasks of different difficulty levels. This paper introduces a new syllable-based document representation at the morphological level of the language for efficient classification. We tested the representation on our corpus with different classification tasks using six classification algorithms and two feature selection techniques. Our experiments show that the new representation is effective for Vietnamese categorization, and suggest that best performance can be achieved using syllable-pair document representation, an SVM with a polynomial kernel as the learning algorithm, and using Information gain and an external dictionary for feature selection.

Compression of Probabilistic XML Documents

Science.gov (United States)

Veldman, Irma; de Keijzer, Ander; van Keulen, Maurice

Database techniques to store, query and manipulate data that contains uncertainty receives increasing research interest. Such UDBMSs can be classified according to their underlying data model: relational, XML, or RDF. We focus on uncertain XML DBMS with as representative example the Probabilistic XML model (PXML) of [10,9]. The size of a PXML document is obviously a factor in performance. There are PXML-specific techniques to reduce the size, such as a push down mechanism, that produces equivalent but more compact PXML documents. It can only be applied, however, where possibilities are dependent. For normal XML documents there also exist several techniques for compressing a document. Since Probabilistic XML is (a special form of) normal XML, it might benefit from these methods even more. In this paper, we show that existing compression mechanisms can be combined with PXML-specific compression techniques. We also show that best compression rates are obtained with a combination of PXML-specific technique with a rather simple generic DAG-compression technique.

Guidelines for Reproducibly Building and Simulating Systems Biology Models.

Science.gov (United States)

Medley, J Kyle; Goldberg, Arthur P; Karr, Jonathan R

2016-10-01

Reproducibility is the cornerstone of the scientific method. However, currently, many systems biology models cannot easily be reproduced. This paper presents methods that address this problem. We analyzed the recent Mycoplasma genitalium whole-cell (WC) model to determine the requirements for reproducible modeling. We determined that reproducible modeling requires both repeatable model building and repeatable simulation. New standards and simulation software tools are needed to enhance and verify the reproducibility of modeling. New standards are needed to explicitly document every data source and assumption, and new deterministic parallel simulation tools are needed to quickly simulate large, complex models. We anticipate that these new standards and software will enable researchers to reproducibly build and simulate more complex models, including WC models.

Technical basis document for internal dosimetry

CERN Document Server

Hickman, D P

1991-01-01

This document provides the technical basis for the Chem-Nuclear Geotech (Geotech) internal dosimetry program. Geotech policy describes the intentions of the company in complying with radiation protection standards and the as low as reasonably achievable (ALARA) program. It uses this policy and applicable protection standards to derive acceptable methods and levels of bioassay to assure compliance. The models and computational methods used are described in detail within this document. FR-om these models, dose- conversion factors and derived limits are computed. These computations are then verified using existing documentation and verification information or by demonstration of the calculations used to obtain the dose-conversion factors and derived limits. Recommendations for methods of optimizing the internal dosimetry program to provide effective monitoring and dose assessment for workers are provided in the last section of this document. This document is intended to be used in establishing an accredited dosi...

Non-plant referenced simulator methodology to meet new 10 CFR 55.45 rule

International Nuclear Information System (INIS)

Ibarra, J.G.

1988-01-01

The new 10CFR55.45 rule on Operating Tests necessitates that simulators be upgraded to meet the new requirements. This paper presents the human factors work done on an NRC approved guidance document sponsored by four utilities to develop a non-plant reference simulator facility. Human factors developed the simulator process flow and criteria, and integrated all the development work into the simulation facility plan. The human factors work provided the mechanism to solidify ideas and provided the foundation for the simulator development methodology

AVIS: analysis method for document coherence

International Nuclear Information System (INIS)

Henry, J.Y.; Elsensohn, O.

1994-06-01

The present document intends to give a short insight into AVIS, a method which permits to verify the quality of technical documents. The paper includes the presentation of the applied approach based on the K.O.D. method, the definition of quality criteria of a technical document, as well as a description of the means of valuating these criteria. (authors). 9 refs., 2 figs

Storing XML Documents in Databases

NARCIS (Netherlands)

A.R. Schmidt; S. Manegold (Stefan); M.L. Kersten (Martin); L.C. Rivero; J.H. Doorn; V.E. Ferraggine

2005-01-01

textabstractThe authors introduce concepts for loading large amounts of XML documents into databases where the documents are stored and maintained. The goal is to make XML databases as unobtrusive in multi-tier systems as possible and at the same time provide as many services defined by the XML

Waste management system requirements document

International Nuclear Information System (INIS)

1991-02-01

This volume defines the top level requirements for the Mined Geologic Disposal System (MGDS). It is designed to be used in conjunction with Volume 1 of the WMSR, General System Requirements. It provides a functional description expanding the requirements allocated to the MGDS in Volume 1 and elaborates on each requirement by providing associated performance criteria as appropriate. Volumes 1 and 4 of the WMSR provide a minimum set of requirements that must be satisfied by the final MGDS design. This document sets forth specific requirements that must be fulfilled. It is not the intent or purpose of this top level document to describe how each requirement is to be satisfied in the final MGDS design. Each subsequent level of the technical document hierarchy must provide further guidance and definition as to how each of these requirements is to be implemented in the design. It is expected that each subsequent level of requirements will be significantly more detailed. Section 2 of this volume provides a functional description of the MGDS. Each function is addressed in terms of requirements, and performance criteria. Section 3 provides a list of controlling documents. Each document cited in a requirement of Chapter 2 is included in this list and is incorporated into this document as a requirement on the final system. The WMSR addresses only federal requirements (i.e., laws, regulations and DOE orders). State and local requirements are not addressed. However, it will be specifically noted at the potentially affected WMSR requirements that there could be additional or more stringent regulations imposed by a state or local requirements or administering agency over the cited federal requirements

Pretest analysis document for Semiscale Test S-FS-1

International Nuclear Information System (INIS)

Chen, T.H.

1985-02-01

This report documents the pretest analysis calculation completed with the RELAP5/MOD2/CY21 code for Semiscale Test S-FS-1. The test will simulate the double-ended offset shear of the main steam line at the exit of the broken loop steam generator (downstream of the flow restrictor) and the subsequent plant recovery. The recovery portion of the test consists of a plant stabilization phase and a plant cooldown phase. The recovery procedures involve normal charging/letdown operation, pressurizer heater operation, secondary steam and feed of the unaffected steam generator, and pressurizer auxiliary spray. The test will be terminated after the unaffected steam generator and pressurizer pressures and liquid levels are stable, and the average priamry fluid temperature is stable at about 480 K (405 0 F) for at least 10 minutes

Documenting Penicillin Allergy: The Impact of Inconsistency

Science.gov (United States)

Shah, Nirav S.; Ridgway, Jessica P.; Pettit, Natasha; Fahrenbach, John; Robicsek, Ari

2016-01-01

Background Allergy documentation is frequently inconsistent and incomplete. The impact of this variability on subsequent treatment is not well described. Objective To determine how allergy documentation affects subsequent antibiotic choice. Design Retrospective, cohort study. Participants 232,616 adult patients seen by 199 primary care providers (PCPs) between January 1, 2009 and January 1, 2014 at an academic medical system. Main Measures Inter-physician variation in beta-lactam allergy documentation; antibiotic treatment following beta-lactam allergy documentation. Key Results 15.6% of patients had a reported beta-lactam allergy. Of those patients, 39.8% had a specific allergen identified and 22.7% had allergic reaction characteristics documented. Variation between PCPs was greater than would be expected by chance (all ppenicillins”) (24.0% to 58.2%) and documentation of the reaction characteristics (5.4% to 51.9%). After beta-lactam allergy documentation, patients were less likely to receive penicillins (Relative Risk [RR] 0.16 [95% Confidence Interval: 0.15–0.17]) and cephalosporins (RR 0.28 [95% CI 0.27–0.30]) and more likely to receive fluoroquinolones (RR 1.5 [95% CI 1.5–1.6]), clindamycin (RR 3.8 [95% CI 3.6–4.0]) and vancomycin (RR 5.0 [95% CI 4.3–5.8]). Among patients with beta-lactam allergy, rechallenge was more likely when a specific allergen was identified (RR 1.6 [95% CI 1.5–1.8]) and when reaction characteristics were documented (RR 2.0 [95% CI 1.8–2.2]). Conclusions Provider documentation of beta-lactam allergy is highly variable, and details of the allergy are infrequently documented. Classification of a patient as beta-lactam allergic and incomplete documentation regarding the details of the allergy lead to beta-lactam avoidance and use of other antimicrobial agents, behaviors that may adversely impact care quality and cost. PMID:26981866

Documenting pharmacist interventions on an intranet.

Science.gov (United States)

Simonian, Armen I

2003-01-15

The process of developing and implementing an intranet Web site for clinical intervention documentation is described. An inpatient pharmacy department initiated an organizationwide effort to improve documentation of interventions by pharmacists at its seven hospitals to achieve real-time capture of meaningful benchmarking data. Standardization of intervention types would allow the health system to contrast and compare medication use, process improvement, and patient care initiatives among its hospitals. After completing a needs assessment and reviewing current methodologies, a computerized tracking tool was developed in-house and integrated with the organization's intranet. Representatives from all hospitals agreed on content and functionality requirements for the Web site. The site was completed and activated in February 2002. Before this Web site was established, the most documented intervention types were Renal Adjustment and Clarify Dose, with a daily average of four and three, respectively. After site activation, daily averages for Renal Adjustment remained unchanged, but Clarify Dose is now documented nine times per day. Drug Information and i.v.-to-p.o. intervention types, which previously averaged less than one intervention per day, are now documented an average of four times daily. Approximately 91% of staff pharmacists are using this site. Future plans for this site include enhanced accessibility to the site with wireless personal digital assistants. The design and implementation of an intranet Web site to document pharmacists' interventions doubled the rate of intervention documentation and standardized the intervention types among hospitals in the health system.

Design and Test of Advanced Thermal Simulators for an Alkali Metal-Cooled Reactor Simulator

Science.gov (United States)

Garber, Anne E.; Dickens, Ricky E.

2011-01-01

The Early Flight Fission Test Facility (EFF-TF) at NASA Marshall Space Flight Center (MSFC) has as one of its primary missions the development and testing of fission reactor simulators for space applications. A key component in these simulated reactors is the thermal simulator, designed to closely mimic the form and function of a nuclear fuel pin using electric heating. Continuing effort has been made to design simple, robust, inexpensive thermal simulators that closely match the steady-state and transient performance of a nuclear fuel pin. A series of these simulators have been designed, developed, fabricated and tested individually and in a number of simulated reactor systems at the EFF-TF. The purpose of the thermal simulators developed under the Fission Surface Power (FSP) task is to ensure that non-nuclear testing can be performed at sufficiently high fidelity to allow a cost-effective qualification and acceptance strategy to be used. Prototype thermal simulator design is founded on the baseline Fission Surface Power reactor design. Recent efforts have been focused on the design, fabrication and test of a prototype thermal simulator appropriate for use in the Technology Demonstration Unit (TDU). While designing the thermal simulators described in this paper, effort were made to improve the axial power profile matching of the thermal simulators. Simultaneously, a search was conducted for graphite materials with higher resistivities than had been employed in the past. The combination of these two efforts resulted in the creation of thermal simulators with power capacities of 2300-3300 W per unit. Six of these elements were installed in a simulated core and tested in the alkali metal-cooled Fission Surface Power Primary Test Circuit (FSP-PTC) at a variety of liquid metal flow rates and temperatures. This paper documents the design of the thermal simulators, test program, and test results.

Structure and drafting of safeguards regulatory documents

International Nuclear Information System (INIS)

Cole, R.J.; Bennett, C.A.; Edelhertz, H.; Wood, M.T.; Brown, R.J.; Roberts, F.P.

1977-09-01

This study develops hypothesis about the relation between the structure and drafting of safeguards regulatory documents and the ability of document users to understand and implement them in a way that reflects the intent and requirements of the NRC. Four decisions are needed to improve communication: (1) Should improvement of safeguards regulatory documents as communication instruments be an explicit NRC program. (2) What specific methods of communication should be the focus of improvement efforts. (3) What actions to improve communications are feasible and desirable. (4) How should the NRC divide its available effort and resources among desirable actions in order to provide the most effective communication through regulatory documents. This volume contains: introduction, conceptual bases, legal requirements, targets, choice of documents, preparation of documents, readability, and further study of recommended changes in structure and drafting

Verification of Simulation Tools

International Nuclear Information System (INIS)

Richard, Thierry

2015-01-01

Before qualifying a simulation tool, the requirements shall first be clearly identified, i.e.: - What type of study needs to be carried out? - What phenomena need to be modeled? This phase involves writing a precise technical specification. Once the requirements are defined, the most adapted product shall be selected from the various software options available on the market. Before using a particular version of a simulation tool to support the demonstration of nuclear safety studies, the following requirements shall be met. - An auditable quality assurance process complying with development international standards shall be developed and maintained, - A process of verification and validation (V and V) shall be implemented. This approach requires: writing a report and/or executive summary of the V and V activities, defining a validated domain (domain in which the difference between the results of the tools and those of another qualified reference is considered satisfactory for its intended use). - Sufficient documentation shall be available, - A detailed and formal description of the product (software version number, user configuration, other settings and parameters) in the targeted computing environment shall be available. - Source codes corresponding to the software shall be archived appropriately. When these requirements are fulfilled, the version of the simulation tool shall be considered qualified for a defined domain of validity, in a given computing environment. The functional verification shall ensure that: - the computer architecture of the tool does not include errors, - the numerical solver correctly represents the physical mathematical model, - equations are solved correctly. The functional verification can be demonstrated through certification or report of Quality Assurance. The functional validation shall allow the user to ensure that the equations correctly represent the physical phenomena in the perimeter of intended use. The functional validation can

Documenting the Engineering Design Process

Science.gov (United States)

Hollers, Brent

2017-01-01

Documentation of ideas and the engineering design process is a critical, daily component of a professional engineer's job. While patent protection is often cited as the primary rationale for documentation, it can also benefit the engineer, the team, company, and stakeholders through creating a more rigorously designed and purposeful solution.…

Documentation of high impact visualizations and improvement plans for utilization of VisIt for reactor simulation

Energy Technology Data Exchange (ETDEWEB)

R.Childs, H; Bremer, D J

2008-10-03

The primary goal of this milestone was to enable the visualization and analysis needs of the campaign's simulation codes. This goal was well accomplished. We have extended the VisIt visualization and analysis tool to be suitable for the Nek, UNIC, SAS, and DIABLO code teams. This represented a significant development effort, primarily in terms of tuning the processing of the very large data sets produced by the Nek code. As a result of our development, and of the support we provided, these groups have been able to successfully accomplish their visualization and analysis activities using VisIt. Visualization is an important part of the simulation process. It allows stakeholders to explore simulations and discover phenomena, to confirm assumptions, and to convey findings to a larger audience. Further, visualization software is complex and is an active research area, especially in the area of visualization of very large data sets, such as those produced by the Reactor campaign's Nek code. To meet the campaign's visualization and analysis needs, we chose to leverage the existing software tool, VisIt. VisIt is an open source, parallel visualization and analysis tool for interactively exploring scientific data. The tool represents approximately fifty man-years worth of effort, much of which was dedicated to techniques for processing large data and also to user interfaces. VisIt originated in the DOE's Advanced Simulation and Computing Initiative (ASCI) program, but is also actively developed by the Office of Science's Scientific Discovery through Advanced Computing (SciDAC) program, as well as by the at large open source community, including university partners. Our work for this effort consisted of both customizing VisIt to meet Reactor campaign needs and of providing support for stakeholders in the Reactor campaign to ensure they were successful using the tool.

Document recognition serving people with disabilities

Science.gov (United States)

Fruchterman, James R.

2007-01-01

Document recognition advances have improved the lives of people with print disabilities, by providing accessible documents. This invited paper provides perspectives on the author's career progression from document recognition professional to social entrepreneur applying this technology to help people with disabilities. Starting with initial thoughts about optical character recognition in college, it continues with the creation of accurate omnifont character recognition that did not require training. It was difficult to make a reading machine for the blind in a commercial setting, which led to the creation of a nonprofit social enterprise to deliver these devices around the world. This network of people with disabilities scanning books drove the creation of Bookshare.org, an online library of scanned books. Looking forward, the needs for improved document recognition technology to further lower the barriers to reading are discussed. Document recognition professionals should be proud of the positive impact their work has had on some of society's most disadvantaged communities.

13. Project Management Documentation and Communications

DEFF Research Database (Denmark)

Kampf, Constance Elizabeth

2014-01-01

This chapter discusses the relationship between documentation and communication practices in organizational contexts.......This chapter discusses the relationship between documentation and communication practices in organizational contexts....

Semantic Metadata for Heterogeneous Spatial Planning Documents

Science.gov (United States)

Iwaniak, A.; Kaczmarek, I.; Łukowicz, J.; Strzelecki, M.; Coetzee, S.; Paluszyński, W.

2016-09-01

Spatial planning documents contain information about the principles and rights of land use in different zones of a local authority. They are the basis for administrative decision making in support of sustainable development. In Poland these documents are published on the Web according to a prescribed non-extendable XML schema, designed for optimum presentation to humans in HTML web pages. There is no document standard, and limited functionality exists for adding references to external resources. The text in these documents is discoverable and searchable by general-purpose web search engines, but the semantics of the content cannot be discovered or queried. The spatial information in these documents is geographically referenced but not machine-readable. Major manual efforts are required to integrate such heterogeneous spatial planning documents from various local authorities for analysis, scenario planning and decision support. This article presents results of an implementation using machine-readable semantic metadata to identify relationships among regulations in the text, spatial objects in the drawings and links to external resources. A spatial planning ontology was used to annotate different sections of spatial planning documents with semantic metadata in the Resource Description Framework in Attributes (RDFa). The semantic interpretation of the content, links between document elements and links to external resources were embedded in XHTML pages. An example and use case from the spatial planning domain in Poland is presented to evaluate its efficiency and applicability. The solution enables the automated integration of spatial planning documents from multiple local authorities to assist decision makers with understanding and interpreting spatial planning information. The approach is equally applicable to legal documents from other countries and domains, such as cultural heritage and environmental management.

a Case Study in Documentation Production as Learning Tools Benefitting Multiple Stakeholders

Science.gov (United States)

Truesdale, T. J.; Hierlihy, B.; Jouan, P.

2017-08-01

The Fondation Strutt Foundation has taken on the conservation planning of the Strutt House as part of a P3 collaborative effort with the National Capital Commission (NCC). This paper will address three of the primary documents/data sets (documentary methodologies) being used on/for the Strutt House project. The Strutt House is a Recognized Federal Heritage Building and a significant example of Canadian modernist architecture. Stakeholder is a term often used in Architectural Projects reflecting an economic interest in success of the project. In conservation projects the stakeholder generally reflects social, cultural and/or economic interests in a given project. The Strutt House project has benefitted from stakeholders that have all been interested in the above, as well as the education of our future conservationists. The Strutt house was purchased from the architect's daughter in 2010, and as part of the acquisition, a Heritage Structure Report was commissioned and produced by PTAH Consultants Inc., Architects. The report forms the first of the primary referenced documents of this paper, including: a comprehensive photographic record of existing conditions; and, a building simulation model of the house `as designed/built'. This HSR and the accompanying data/documents have been adopted as the basis of an evolving document in the development of the Conservation Plan including: additional heritage surveys and technologies; traditional drawings, photographic and video records; and, a series of workshops on the structural stabilization efforts, thermography scans, and smoke/blow-door (air pressure) testing. In 2016, Pierre Jouan, a Master's thesis student from KU Leuvan, working with the Carleton University CIMS lab under the direction of Professor Mario Santana, and the FSF completed a 3-D scanning and photogrammetry workshop on the Strutt House and created a building information model (BIM model) from the collected data. The three primary documentation processes

A CASE STUDY IN DOCUMENTATION PRODUCTION AS LEARNING TOOLS BENEFITTING MULTIPLE STAKEHOLDERS

Directory of Open Access Journals (Sweden)

T. J. Truesdale

2017-08-01

Full Text Available The Fondation Strutt Foundation has taken on the conservation planning of the Strutt House as part of a P3 collaborative effort with the National Capital Commission (NCC. This paper will address three of the primary documents/data sets (documentary methodologies being used on/for the Strutt House project. The Strutt House is a Recognized Federal Heritage Building and a significant example of Canadian modernist architecture. Stakeholder is a term often used in Architectural Projects reflecting an economic interest in success of the project. In conservation projects the stakeholder generally reflects social, cultural and/or economic interests in a given project. The Strutt House project has benefitted from stakeholders that have all been interested in the above, as well as the education of our future conservationists. The Strutt house was purchased from the architect’s daughter in 2010, and as part of the acquisition, a Heritage Structure Report was commissioned and produced by PTAH Consultants Inc., Architects. The report forms the first of the primary referenced documents of this paper, including: a comprehensive photographic record of existing conditions; and, a building simulation model of the house ‘as designed/built’. This HSR and the accompanying data/documents have been adopted as the basis of an evolving document in the development of the Conservation Plan including: additional heritage surveys and technologies; traditional drawings, photographic and video records; and, a series of workshops on the structural stabilization efforts, thermography scans, and smoke/blow-door (air pressure testing. In 2016, Pierre Jouan, a Master’s thesis student from KU Leuvan, working with the Carleton University CIMS lab under the direction of Professor Mario Santana, and the FSF completed a 3-D scanning and photogrammetry workshop on the Strutt House and created a building information model (BIM model from the collected data. The three primary

New Challenges of the Documentation in Media

Directory of Open Access Journals (Sweden)

Antonio García Jiménez

2015-07-01

Full Text Available This special issue, presented by index.comunicación, is focused on media related information & documentation. This field undergoes constant and profound changes, especially visible in documentation processes. A situation characterized by the existence of tablets, smartphones, applications, and by the almost achieved digitization of traditional documents, in addition to the crisis of the press business model, that involves mutations in the journalists’ tasks and in the relationship between them and Documentation. Papers included in this special issue focus on some of the concerns in this domain: the progressive autonomy of the journalist in access to information sources, the role of press offices as documentation sources, the search of information on the web, the situation of media blogs, the viability of elements of information architecture in smart TV and the development of social TV and its connection to Documentation.

STANDARDIZATION OF MEDICAL DOCUMENT FLOW: PRINCIPLES AND FEATURES

Directory of Open Access Journals (Sweden)

Melentev Vladimir Anatolevich

2013-04-01

Full Text Available In presented article the questions connected with the general concepts and bases of functioning of document flow in borders of any economic object (the enterprise, establishment, the organization are considered. Gostirovanny definition of document flow, classification of types of documentary streams is given. The basic principles of creation of document flow, following which are considered allows to create optimum structure документопотока and nature of movement of documents; interrelation of external and internal influences. Further basic elements of medical document flow are considered; the main problems of medical document flow being, besides, major factors, distinguishing medical document flow from document flow of manufacturing enterprises or other economic objects are specified. From consideration of these problems the conclusion about an initial stage of their decision - standardization of the medical document flow, being, besides, is drawn by the first stage of creation of a common information space of medical branch.

Exploitation of Documented Historical Floods for Achieving Better Flood Defense

Directory of Open Access Journals (Sweden)

Slobodan Kolaković

2016-01-01

Full Text Available Establishing Base Flood Elevation for a stream network corresponding to a big catchment is feasible by interdisciplinary approach, involving stochastic hydrology, river hydraulics, and computer aided simulations. A numerical model calibrated by historical floods has been exploited in this study. The short presentation of the catchment of the Tisza River in this paper is followed by the overview of historical floods which hit the region in the documented period of 130 years. Several well documented historical floods provided opportunity for the calibration of the chosen numerical model. Once established, the model could be used for investigation of different extreme flood scenarios and to establish the Base Flood Elevation. The calibration has shown that the coefficient of friction in case of the Tisza River is dependent both on the actual water level and on the preceding flood events. The effect of flood plain maintenance as well as the activation of six potential detention ponds on flood mitigation has been examined. Furthermore, the expected maximum water levels have also been determined for the case if the ever observed biggest 1888 flood hit the region again. The investigated cases of flood superposition highlighted the impact of tributary Maros on flood mitigation along the Tisza River.

Software Design Document for the AMP Nuclear Fuel Performance Code

International Nuclear Information System (INIS)

Philip, Bobby; Clarno, Kevin T.; Cochran, Bill

2010-01-01

The purpose of this document is to describe the design of the AMP nuclear fuel performance code. It provides an overview of the decomposition into separable components, an overview of what those components will do, and the strategic basis for the design. The primary components of a computational physics code include a user interface, physics packages, material properties, mathematics solvers, and computational infrastructure. Some capability from established off-the-shelf (OTS) packages will be leveraged in the development of AMP, but the primary physics components will be entirely new. The material properties required by these physics operators include many highly non-linear properties, which will be replicated from FRAPCON and LIFE where applicable, as well as some computationally-intensive operations, such as gap conductance, which depends upon the plenum pressure. Because there is extensive capability in off-the-shelf leadership class computational solvers, AMP will leverage the Trilinos, PETSc, and SUNDIALS packages. The computational infrastructure includes a build system, mesh database, and other building blocks of a computational physics package. The user interface will be developed through a collaborative effort with the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Capability Transfer program element as much as possible and will be discussed in detail in a future document.

Documentation for the Waste Reduction Model (WARM)

Science.gov (United States)

This page describes the WARM documentation files and provides links to all documentation files associated with EPA’s Waste Reduction Model (WARM). The page includes a brief summary of the chapters documenting the greenhouse gas emission and energy factors.

ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

Energy Technology Data Exchange (ETDEWEB)

M. Maniyar

2004-06-22

The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

Simulation in Medical School Education: Review for Emergency Medicine

Directory of Open Access Journals (Sweden)

Shahram Lotfipour

2011-05-01

Full Text Available Medical education is rapidly evolving. With the paradigm shift to small-group didactic sessions and focus on clinically oriented case-based scenarios, simulation training has provided educators a novel way to deliver medical education in the 21st century. The field continues to expand in scope and practice and is being incorporated into medical school clerkship education, and specifically in emergency medicine (EM. The use of medical simulation in graduate medical education is well documented. Our aim in this article is to perform a retrospective review of the current literature, studying simulation use in EM medical student clerkships. Studies have demonstrated the effectiveness of simulation in teaching basic science, clinical knowledge, procedural skills, teamwork, and communication skills. As simulation becomes increasingly prevalent in medical school curricula, more studies are needed to assess whether simulation training improves patient-related outcomes.

Repository simulation model: Final report

International Nuclear Information System (INIS)

1988-03-01

This report documents the application of computer simulation for the design analysis of the nuclear waste repository's waste handling and packaging operations. The Salt Repository Simulation Model was used to evaluate design alternatives during the conceptual design phase of the Salt Repository Project. Code development and verification was performed by the Office of Nuclear Waste Isolation (ONWL). The focus of this report is to relate the experience gained during the development and application of the Salt Repository Simulation Model to future repository design phases. Design of the repository's waste handling and packaging systems will require sophisticated analysis tools to evaluate complex operational and logistical design alternatives. Selection of these design alternatives in the Advanced Conceptual Design (ACD) and License Application Design (LAD) phases must be supported by analysis to demonstrate that the repository design will cost effectively meet DOE's mandated emplacement schedule and that uncertainties in the performance of the repository's systems have been objectively evaluated. Computer simulation of repository operations will provide future repository designers with data and insights that no other analytical form of analysis can provide. 6 refs., 10 figs

Computer Networks E-learning Based on Interactive Simulations and SCORM

Directory of Open Access Journals (Sweden)

Francisco Andrés Candelas

2011-05-01

Full Text Available This paper introduces a new set of compact interactive simulations developed for the constructive learning of computer networks concepts. These simulations, which compose a virtual laboratory implemented as portable Java applets, have been created by combining EJS (Easy Java Simulations with the KivaNS API. Furthermore, in this work, the skills and motivation level acquired by the students are evaluated and measured when these simulations are combined with Moodle and SCORM (Sharable Content Object Reference Model documents. This study has been developed to improve and stimulate the autonomous constructive learning in addition to provide timetable flexibility for a Computer Networks subject.

List of documents received by the INDC secretariat

International Nuclear Information System (INIS)

1986-04-01

The Nuclear Data Section of the International Atomic Energy Agency receives documents originated by or for the International Nuclear Data Committee for distribution. This list includes all INDC documents received and distributed by the INDC secretariat during the period January 1984 to March 1986. In addition to the INDC documents received by the INDC Secretariat for distribution, this document also lists the titles of reports received as single copies for information. These documents cannot be obtained from the INDC Secretariat, but should be requested from the originating laboratory or organization. All of the single copy documents, which have been received between January 1984 and March 1986 are listed in Appendix A to this document

Business process modeling for processing classified documents using RFID technology

Directory of Open Access Journals (Sweden)

Koszela Jarosław

2016-01-01

Full Text Available The article outlines the application of the processing approach to the functional description of the designed IT system supporting the operations of the secret office, which processes classified documents. The article describes the application of the method of incremental modeling of business processes according to the BPMN model to the description of the processes currently implemented (“as is” in a manual manner and target processes (“to be”, using the RFID technology for the purpose of their automation. Additionally, the examples of applying the method of structural and dynamic analysis of the processes (process simulation to verify their correctness and efficiency were presented. The extension of the process analysis method is a possibility of applying the warehouse of processes and process mining methods.

Magnetic fusion program summary document

International Nuclear Information System (INIS)

1979-04-01

This document outlines the current and planned research, development, and commercialization (RD and C) activities of the Offic of Fusion Energy under the Assistant Secretary for Energy Technology, US Department of Energy (DOE). The purpose of this document is to explain the Office of Fusion Energy's activities to Congress and its committees and to interested members of the public

SRS ecology: Environmental information document

Energy Technology Data Exchange (ETDEWEB)

Wike, L.D.; Shipley, R.W.; Bowers, J.A. [and others

1993-09-01

The purpose of this Document is to provide a source of ecological information based on the exiting knowledge gained from research conducted at the Savannah River Site. This document provides a summary and synthesis of ecological research in the three main ecosystem types found at SRS and information on the threatened and endangered species residing there.

SRS ecology: Environmental information document

International Nuclear Information System (INIS)

Wike, L.D.; Shipley, R.W.; Bowers, J.A.

1993-09-01

The purpose of this Document is to provide a source of ecological information based on the exiting knowledge gained from research conducted at the Savannah River Site. This document provides a summary and synthesis of ecological research in the three main ecosystem types found at SRS and information on the threatened and endangered species residing there

ITK optical links backup document

CERN Document Server

Huffman, B T; The ATLAS collaboration; Flick, T; Ye, J

2013-01-01

This document describes the proposed optical links to be used for the ITK in the phase II upgrade. The current R&D for optical links pursued in the Versatile Link group is reviewed. In particular the results demonstrating the radiation tolerance of all the on-detector components are documented. The bandwidth requirements and the resulting numerology are given.

AVLIS documentation overview and tables of contents

International Nuclear Information System (INIS)

1984-01-01

Three documents constitute the executive summary series in Data Package III: this document (Documentation Overview and Tables of Contents (E001)) plus the AVLIS Production Plant Executive Summary (E010) and the AVLIS Production Plant Overall Design Report (E020). They provide progressively greater detail on the key information and conclusions contained within the data package. The Executive Summary and Overall Design Report present summaries of each Data Package III document. They are intended to provide a global overview of AVLIS Production Plant deployment including program planning, project management, schedules, engineering design, production, operations, capital cost, and operating cost. The purpose of Overview and Tables of Contents is threefold: to briefly review AVLIS goals for Data Package III documentation, to present an overview of the contents of the data package, and to provide a useful guide to information contained in the numerous documents comprising the package

SEMANTIC METADATA FOR HETEROGENEOUS SPATIAL PLANNING DOCUMENTS

Directory of Open Access Journals (Sweden)

A. Iwaniak

2016-09-01

Full Text Available Spatial planning documents contain information about the principles and rights of land use in different zones of a local authority. They are the basis for administrative decision making in support of sustainable development. In Poland these documents are published on the Web according to a prescribed non-extendable XML schema, designed for optimum presentation to humans in HTML web pages. There is no document standard, and limited functionality exists for adding references to external resources. The text in these documents is discoverable and searchable by general-purpose web search engines, but the semantics of the content cannot be discovered or queried. The spatial information in these documents is geographically referenced but not machine-readable. Major manual efforts are required to integrate such heterogeneous spatial planning documents from various local authorities for analysis, scenario planning and decision support. This article presents results of an implementation using machine-readable semantic metadata to identify relationships among regulations in the text, spatial objects in the drawings and links to external resources. A spatial planning ontology was used to annotate different sections of spatial planning documents with semantic metadata in the Resource Description Framework in Attributes (RDFa. The semantic interpretation of the content, links between document elements and links to external resources were embedded in XHTML pages. An example and use case from the spatial planning domain in Poland is presented to evaluate its efficiency and applicability. The solution enables the automated integration of spatial planning documents from multiple local authorities to assist decision makers with understanding and interpreting spatial planning information. The approach is equally applicable to legal documents from other countries and domains, such as cultural heritage and environmental management.

Precise documentation of well-structured programs

Energy Technology Data Exchange (ETDEWEB)

Parnas, D.L.; Madey, J.; Iglewski, M. [McMaster Univ., Hamilton, Ontario (Canada)

1997-11-01

This paper describes a new form of program documentation that is precise, systematic and readable. This documentation comprises a set of displays supplemented by a lexicon and an index. Each display presents a program fragment in such a way that its correctness can be examined without looking at any other display. Each display has three parts: (1) the specification of the program presented in the display, (2) the program itself, and (3) the specifications of programs invoked by this program. The displays are intended to be used by Software Engineers as a reference document during inspection and maintenance. This paper also introduces a specification technique that is a refinement of Mills functional approach to program documentation and verification; programs are specified and described in tabular form.

Qualification of RETRAN for simulator applications

International Nuclear Information System (INIS)

Harrison, J.F.

1988-01-01

The use of full-scope control room replica simulators increased substantially following the accident at Three Mile Island Unit 2. The technical capability required to represent severe events has been included, in varying degrees, in most simulators purchased since the TMI-2 accident. The ability of the instructor to create a large variety of combinations of malfunctions has also greatly expanded. The nuclear industry has developed a standard which establishes the minimum functional requirements for full-scope nuclear control room simulators used for operator training. This standard, ANSI/ANS-3.5, was first issued in 1981 and was reissued in 1985. A method for performing simulator qualification with best estimate analytical data has been proposed in EPRI NP-4243, Analytic Simulator Qualification Methodology. The idea presented there is to choose a set of transients which drive the simulator into all the system conditions (dynamic states) likely to be encountered during operator training. The key observable parameters for each state are compared to analyses performed with the best estimate analytical model The closeness of the comparison determines the fidelity of the simulator. The approach described in EPRI NP-4243 has been adapted for evaluating RETRAN's capability for use in simulator qualification. RETRAN analyses which compare the RETRAN results to plant or test facility data are evaluated with respect to the simulator test matrix documented in EPRI NP-4243

Improving the Aircraft Design Process Using Web-based Modeling and Simulation

Science.gov (United States)

Reed, John A.; Follen, Gregory J.; Afjeh, Abdollah A.

2003-01-01

Designing and developing new aircraft systems is time-consuming and expensive. Computational simulation is a promising means for reducing design cycle times, but requires a flexible software environment capable of integrating advanced multidisciplinary and muitifidelity analysis methods, dynamically managing data across heterogeneous computing platforms, and distributing computationally complex tasks. Web-based simulation, with its emphasis on collaborative composition of simulation models, distributed heterogeneous execution, and dynamic multimedia documentation, has the potential to meet these requirements. This paper outlines the current aircraft design process, highlighting its problems and complexities, and presents our vision of an aircraft design process using Web-based modeling and simulation.

IAEA activities in nuclear reactors simulation for educational purposes

International Nuclear Information System (INIS)

Lyon, R.B.

1998-01-01

The International Atomic Energy Agency (IAEA) has established a programme in nuclear reactor simulation computer programs to assist its Member States in education and training. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the supply or development of simulation programs and training material, sponsors training courses and workshops, and distributes documentation and computer programs. Currently, the IAEA has two simulation programs: the Classroom-based Advanced Reactor Demonstrators package, and the Advanced Reactor Simulator. Both packages simulate the behaviour of BWR, PWR and HWR reactor types. For each package, the modeling approach and assumptions are broadly described, together with a general description of the operation of the computer programs. (author)