WorldWideScience

Sample records for nanos amicus gen

  1. Comparison of plateletpheresis on the Fenwal Amicus, Fresenius COM.TEC, and Trima Accel Cell separators.

    Keklik, Muzaffer; Eser, Bulent; Kaynar, Leylagul; Sivgin, Serdar; Keklik, Ertugrul; Solmaz, Musa; Ozturk, Ahmet; Buyukoglan, Ruksan; Yay, Mehmet; Cetin, Mustafa; Unal, Ali

    2015-06-01

    Blood component donations by apheresis have become more common in modern blood transfusion practices. We compared three apheresis instruments (Fenwal Amicus, Fresenius COM.TEC, and Trima Accel) with regard to platelet (PLT) yield, collection efficiency (CE), and collection rate (CR). The single-needle or double-needle plateletpheresis procedures of the three instruments were compared in a retrospective, randomized study in 270 donors. The blood volume processed was higher in the COM.TEC compared with the Amicus and Trima. Also there was a significantly higher median volume of ACD used in collections on the COM.TEC compared with the Amicus and Trima. The PLT yield was significantly lower with the COM.TEC compared with the Amicus and Trima. Additionally, the CE was significantly lower with the COM.TEC compared with the Amicus and Trima. There was no significant difference in median separation time and CR between the three groups. When procedures were compared regarding CE by using Amicus device, it was significantly higher in single-needle than double-needle plateletpheresis. When double-needle Amicus system was compared with double-needle COM.TEC system, CE and PLT yield were significantly higher with Amicus system. When single-needle Amicus system was compared with single-needle Trima system, CE and PLT yield were significantly higher with Trima system. All instruments collected PLTs efficiently. However, the CE was lower with the COM.TEC compared with the Amicus and Trima. Also, we found Amicus single-needle system collected PLTs more efficiently compared with the double-needle system. CE and PLT yields were significantly higher with the single-needle Trima instrument compared with the single-needle Amicus device. © 2014 Wiley Periodicals, Inc.

  2. Amicus curiae, justicia constitucional y fortalecimiento cualitativo del debate jurisdiccional

    Víctor Bazán

    2014-12-01

    Full Text Available El presente estudio indaga sobre los perfiles actuales del amicus curiae y su importancia en el despliegue de la justicia constitucional. Analiza asimismo su utilidad como instrumento para viabilizar la participación ciudadana en el debate judicial en torno a asuntos de interés institucional y social, y evalúa su aporte cualitativo al acervo argumental de los tribunales internos e internacionales de derechos humanos, sobre la base del crecimiento de los espacios de interacción del derecho constitucional, el derecho procesal constitucional y el derecho internacional de los derechos humanos.

  3. El desarrollo de la institución del amicus curiae en la jurisprudencia internacional

    Francisco José Pascual Vives

    2011-01-01

    Full Text Available The interstate nature of Public International Law has traditionally constrained the access and participation of individuals before international courts. Yet, certain procedural avenues, such as the amicus curiae, have been set up so as to flatten the individual’s intervention in several areas of International Law. This paper studies the evolution of the amicus curiae, an institution which has facilitated the intervention of the individual before certain international courts.

  4. Small angle neutron scattering study of nano sized microstructure in Fe-Cr ODS steels for gen IV in-core applications.

    Han, Young-Soo; Mao, Xiadong; Jang, Jinsung

    2013-11-01

    The nano-sized microstructures in Fe-Cr oxide dispersion strengthened steel for Gen IV in-core applications were studied using small angle neutron scattering. The oxide dispersion strengthened steel was manufactured through hot isostatic pressing with various chemical compositions and fabrication conditions. Small angle neutron scattering experiments were performed using a 40 m small angle neutron scattering instrument at HANARO. Nano sized microstructures, namely, yttrium oxides and Cr-oxides were quantitatively analyzed by small angle neutron scattering. The yttrium oxides and Cr-oxides were also observed by transmission electron microscopy. The microstructural analysis results from small angle neutron scattering were compared with those obtained by transmission electron microscopy. The effects of the chemical compositions and fabrication conditions on the microstructure were investigated in relation to the quantitative microstructural analysis results obtained by small angle neutron scattering. The volume fraction of Y-oxide increases after fabrication, and this result is considered to be due to the formation of non-stochiometric Y-Ti-oxides.

  5. Comparison of Plateletpheresis on the Fenwal Amicus and Fresenius Com.Tec Cell Separators.

    Altuntas, Fevzi; Sari, Ismail; Kocyigit, Ismail; Kaynar, Leylagul; Hacioglu, Sibel; Ozturk, Ahmet; Oztekin, Mehmet; Solmaz, Musa; Eser, Bulent; Cetin, Mustafa; Unal, Ali

    2008-01-01

    SUMMARY: BACKGROUND: A variety of apheresis devices are now available on the market for plateletapheresis. We compared two apheresis instruments (Fenwal Amicus and Fresenius COM.TEC) with regard to processing time, platelet (PLT) yield and efficiency, and white blood cell (WBC) content. MATERIAL AND METHODS: Donors undergoing plateletpheresis were randomly separated into two groups (either the Amicus or the COM.TEC cell separator). RESULTS: In the pre-apheresis setting, 32 plateletpheresis procedures performed with each instrument revealed no significant differences in donors' sex, age, weight, height and total blood volume between the two groups. However, the pre-apheresis PLT count was higher with the COM.TEC than with the Amicus (198 × 10(3)/μl vs. 223 × 10(3)/μl; p = 0.035). The blood volume processed to reach a target PLT yield of ≥3.3 × 10(11) was higher in the COM.TEC compared to the Amicus (3,481 vs. 2,850 ml; p 3.3 × 10(11) (p = 0.325). All products obtained with both instruments had WBC counts lower than 5 ↔ 10(6), as required. There was no statistical difference with regard to collection efficiency between the devices (55 ± 15 vs. 57 ± 15%; p = 0.477). However, the collection rate was significantly higher with the Amicus compared to the COM.TEC instrument (0.077 ± 0.012 × 10(11) vs. 0.057 ± 0.008 × 10(11) PLT/min; p < 0.001). CONCLUSION: Both instruments collected platelets efficiently. Additionally, consistent leukoreduction was obtained with both instruments; however, compared with the COM.TEC instrument, the Amicus reached the PLT target yield more quickly.

  6. 75 FR 3939 - Merit Systems Protection Board (MSPB) Provides Notice of Opportunity To File Amicus Briefs

    2010-01-25

    ... MERIT SYSTEMS PROTECTION BOARD Merit Systems Protection Board (MSPB) Provides Notice of Opportunity To File Amicus Briefs AGENCY: Merit Systems Protection Board. ACTION: Notice. SUMMARY: Pursuant to 5 U.S.C. 7521 and 5 CFR 1201.131, the Merit Systems Protection Board (MSPB) is providing notice of...

  7. Enhanced radiation resistance through interface modification of nano-structured steels for Gen IV in-core applications

    Jang, Jinsung; Kang, Suk Hoon; Kim, Min Chul

    2013-06-01

    This project is to increase radiation tolerance of candidate alloys for Gen IV core component through the optimization of grain size and grain boundary characteristics. The focus is on nanocrystalline metal alloys with a fcc crystal structure. The long-term goal is to design and develop bulk nanostructured austenitic steels with enhanced void swelling resistance and substantial ductility, and to enhance their creep resistance at elevated temperatures via grain boundary engineering. An austenitic stainless steel, HT-UPS (high temperature ultra-fine precipitates strengthened) was developed at ORNL, and is expected to show enhanced void swelling resistance through the trapping of point defects at nanometer-sized carbides. Reducing the grain size and increasing the fraction-induced point defects (due to the increased sink area of the grain boundaries), to make bubble nucleation at the boundaries less likely (by reducing the fraction of high-energy boundaries), and to improve the strength and ductility under radiation by producing a higher density of nanometer sized carbides on the boundaries

  8. Nano

    Nørgaard, Bent; Engel, Lars Romann

    2007-01-01

    Gennem de sidste par år har et lille ord med et meget stort potentiale gentagende trængt sig på i den offentlige bevidsthed, det er ordet "nano". Nanovidenskab og nanoteknologi er lige nu to af de "hotteste" forskningsområder og betragtes af mange som porten til en helt ny verden af muligheder....... Muligheder, vi endnu ikke kender konsekvenserne af. Center for Kunst og Videnskabs forestilling NANO giver dig chancen for at blive bekendt med verdens mindste byggesten og idégrundlaget for nanoforskningen. Vi har skabt et rum, som på mange måder minder om et laboratorium. Rummet er forsynet med storskærme......, kolber, væsker og nanopartikler. Her vil du f.eks. opleve, hvordan forskere tilfører guld helt nye egenskaber. Forestillingen veksler mellem kemiske arbejdsdemonstrationer, stemningsskabende musik og livlig debat på storskærme mellem eksperter. NANO opfordrer publikum til at tage stilling til forskningen...

  9. Comparison of the Fenwal Amicus and Fresenius Com.Tec cell separators for autologous peripheral blood progenitor cell collection.

    Altuntas, Fevzi; Kocyigit, Ismail; Ozturk, Ahmet; Kaynar, Leylagul; Sari, Ismail; Oztekin, Mehmet; Solmaz, Musa; Eser, Bulent; Cetin, Mustafa; Unal, Ali

    2007-04-01

    Peripheral blood progenitor cells (PBPC) are commonly used as a stem cell source for autologous transplantation. This study was undertaken to evaluate blood cell separators with respect to separation results and content of the harvest. Forty autologous PBPC collections in patients with hematological malignancies were performed with either the Amicus or the COM.TEC cell separators. The median product volume was lower with the Amicus compared to the COM.TEC (125 mL vs. 300 mL; p < 0.001). There was no statistically significant difference in the median number of CD34+ cell/kg in product between the Amicus and the COM.TEC (3.0 x 10(6) vs. 4.1 x 10(6); p = 0.129). There was a statistically higher mean volume of ACD used in collections on the Amicus compared to the COM.TEC (1040 +/- 241 mL vs. 868 +/- 176 mL; p = 0.019). There was a statistical difference in platelet (PLT) contamination of the products between the Amicus and the COM.TEC (0.3 x 10(11) vs. 1.1 x 10(11); p < 0.001). The median % decrease in PB PLT count was statistically higher in the COM.TEC compared to the Amicus instruments (18.5% vs. 9.5%; p = 0.028). In conclusion, both instruments collected PBPCs efficiently. However, Amicus has the advantage of lower PLT contamination in the product, and less decrease in PB platelet count with lower product volume in autologous setting.

  10. Comparison of Amicus and COBE Spectra for allogenic peripheral blood stem cell harvest: Study from tertiary care centre in India.

    Setia, Rasika Dhawan; Arora, Satyam; Handoo, Anil; Dadu, Tina; Choudhary, Dharma; Sharma, Sajeev Kumar; Kharya, Gaurav; Khandelwal, Vipin; Sachdeva, Prerna; Doval, Divya; Bakliwal, Anamika; Kapoor, Meenu; Bajaj, Shalu; Bachchas, Virendra; Singh, Praveen

    2017-06-01

    Most common source of stem cell graft for both autologous and allogenic haematopoietic transplants are peripheral blood haematopoietic progenitor stem cells. Adequate collection of the CD34+ cells and safety of the allogenic donor during the leukapheresis are of prime importance to an apheresis physician. Our retrospective analysis is a comparison between of two platforms namely, COBE Spectra and Amicus, for CD34+ mononuclear cell collection. The study included the data of GSCF (Granulocyte-Colony-Stimulating Factor) mobilized allogenic PBSC collections at our centre from January 2015 to June 2016. The apheresis platforms used were COBE Spectra and Amicus. Blood cell counts were done using LH750 Beckman Coulter (Florida, Miami, USA). CD45+ & CD34+ cell counts were done using BD FACS Canto-II Flow-Cytometer by ISHAGE guidelines. A total of 170 PBSC (100 COBE Spectra & 70 Amicus) harvests were done on 143 donors, of which 116 completed the collection in a single session and 27 required a second session. Demographic details and pre harvest peripheral blood counts for both the groups did not show any statistical differences. Amicus processed higher blood volume with higher ACD exposure and procedure time compared to COBE Spectra. Higher platelets loss was with COBE Spectra harvests with higher product volumes collection. Collection efficiency (CE2), collection ratio, CD34+ cells dose was similar on both the platforms. RBC contamination, absolute lymphocyte and monocytes counts were significantly higher with Amicus harvest product compared with COBE Spectra. A total of 14 (8.2%; citrate toxicity) adverse reactions were reported out of 170 allogenic PBSC collections. Our study suggests that both Amicus and COBE Spectra platforms offer comparable results for allogenic PBSC collections. Amicus offers a concentrated PBSC product with lesser volume and platelets loss but higher RBC contamination. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Amicus Curiae Brief for the United States Supreme Court on Mental Health Issues Associated with "Physician-Assisted Suicide"

    Werth, James L., Jr.; Gordon, Judith R.

    2002-01-01

    After providing background material related to the Supreme Court cases on "physician-assisted suicide" (Washington v. Glucksberg, 1997, and Vacco v. Quill, 1997), this article presents the amicus curiae brief that was submitted to the United States Supreme Court by 2 national mental health organizations, a state psychological association, and an…

  12. 75 FR 25885 - The Merit Systems Protection Board (MSPB) is Providing Notice of the Opportunity to File Amicus...

    2010-05-10

    ... MERIT SYSTEMS PROTECTION BOARD The Merit Systems Protection Board (MSPB) is Providing Notice of the Opportunity to File Amicus Briefs in the Matter of Larry L. Evans v. Department of Veterans Affairs, MSPB Docket Number AT-3330-09-0953- I-1. AGENCY: Merit Systems Protection Board. ACTION: Notice...

  13. 75 FR 20007 - The Merit Systems Protection Board (MSPB) Is Providing Notice of the Opportunity To File Amicus...

    2010-04-16

    ... MERIT SYSTEMS PROTECTION BOARD The Merit Systems Protection Board (MSPB) Is Providing Notice of the Opportunity To File Amicus Briefs in the Matter of Hyginus U. Aguzie v. Office of Personnel Management, MSPB Docket Number DC-0731- 09-0261-R-1 AGENCY: Merit Systems Protection Board. ACTION: Notice...

  14. 75 FR 6728 - The Merit Systems Protection Board (MSPB) is Providing Notice of the Opportunity to File Amicus...

    2010-02-10

    ... MERIT SYSTEMS PROTECTION BOARD The Merit Systems Protection Board (MSPB) is Providing Notice of the Opportunity to File Amicus Briefs in the Matters of Conyers v. Department of Defense, Docket No...: Merit Systems Protection Board. ACTION: Notice. SUMMARY: On January 25, 2010, the MSPB published in the...

  15. Comparison of double dose plateletpheresis on the Fenwal Amicus, Fresenius COM.TEC and Trima Accel cell separators.

    Keklik, Muzaffer; Eser, Bulent; Kaynar, Leylagul; Solmaz, Musa; Ozturk, Ahmet; Yay, Mehmet; Birekul, Ayse; Oztekin, Mehmet; Sivgin, Serdar; Cetin, Mustafa; Unal, Ali

    2014-10-01

    A variety of apheresis instruments are now available on the market for double dose plateletpheresis. We compared three apheresis devices (Fenwal Amicus, Fresenius COM.TEC and Trima Accel) with regard to processing time, platelet (PLT) yield, collection efficiency (CE) and collection rate (CR). The single-needle or double-needle double plateletpheresis procedures of the three instruments were compared in a retrospective, randomized study in 135 donors. In the pre-apheresis setting, 45 double plateletpheresis procedures performed with each instrument revealed no significant differences in donor's age, sex, weight, hemoglobin, white blood cell and PLT count between three groups. The blood volume processed to reach a target PLT yield of ≥ 6 × 10(11) was higher in the COM.TEC compared with the Amicus and Trima (4394 vs. 3780 and 3340 ml, respectively; p < 0.001). Also there was a significantly higher median volume of ACD used in collections on the COM.TEC compared with the Amicus and Trima (426 vs. 387 and 329 ml, respectively; p < 0.001). There was a significantly higher median time needed for the procedures on the COM.TEC compared with the Amicus and Trima (66 vs. 62 and 63 min, respectively; p = 0.024). The CE was significantly higher with the Trima compared with the Amicus and COM.TEC (83.57 ± 17.19 vs. 66.71 ± 3.47 and 58.79 ± 5.14%, respectively; p < 0.001). Also, there was a significantly higher product volume on the Trima compared with the Amicus and COM.TEC (395.56 vs. 363.11 and 386.4 ml, respectively; p = 0.008). Additionally, the CR was significantly lower with the COM.TEC compared with the Amicus and Trima (0.092 ± 0.011 vs. 0.099 ± 0.013 and 0.097 ± 0.013 plt × 10(11)/min, respectively; p = 0.039). There was no significant differences in PLT yield between the three groups (p = 0.636). Trima single-needle device collected double dose platelets more efficiently than Amicus and

  16. Comparative Analysis of Various Aspects of Plateletpheresis on the Fenwal Amicus and Fresenius COM.TEC Cell Separator Instruments.

    Philip, Joseph; Biswas, Amit Kumar; Chatterjee, Tathagata; Mallhi, Rajiv Singh

    2014-01-01

    To compare the Fenwal Amicus and the Fresenius COM.TEC apheresis instruments regarding donor peripheral blood parameters, operational variables of the instruments, and quality control parameters of the product obtained. We performed 100 platelet collections from 100 voluntary donors using the 2 studied devices. We measured platelet count using an automated analyzer and analyzed the activation statuses using a flow cytometer. The median time needed to perform the procedures was significantly longer with the COM.TEC. However, the product we obtained using the Amicus instrument showed higher degrees of platelet-activation. All products we obtained with both instruments had white blood cell counts of less than 5 × 10(6) per bag. We observed no statistical difference regarding collection efficiency and collection rates between the devices. Both instruments collected platelets efficiently, with minimal donor discomfort. Compared with the COM.TEC instrument, the Amicus reached the platelet target yield more quickly; however, it displayed an increase in platelet activation. Copyright© by the American Society for Clinical Pathology (ASCP).

  17. GenBank

    U.S. Department of Health & Human Services — GenBank is the NIH genetic sequence database, an annotated collection of all publicly available DNA sequences. GenBank is designed to provide and encourage access...

  18. Joint reproductive autonomy: does Evans v Amicus Healthcare Ltd provide for a gender-neutral approach to assisted reproductive rights?

    Allin, Michael J

    2015-06-01

    Assisted reproductive technology encompasses methods of achieving pregnancy by artificial or partially artificial means. Whilst these methods are more commonly used by couples suffering from problems of infertility, some forms of assistance are employed by fertile couples, for example pre-implantation genetic diagnosis. The overall regulatory framework in the UK is predominantly found in the Human Fertilisation and Embryology Act 1990. The usual rules relating to consent and autonomy apply and were discussed in depth in Evans v Amicus Healthcare Ltd and later in Evans v United Kingdom. This paper considers whether the Evans litigation envisages the possibility of further encouraging joint autonomy in the use of zygotes and whether there is a continuing right to autonomy by the party not bearing the pregnancy. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  19. Nano Materials

    Jin, In Ju; Lee, Ik Mo; Kwon, Yeung Gu

    2006-02-01

    This book introduces background of nano science such as summary, plenty room at the bottom, access way to nano technique, nanoparticles using bottom-up method which are a marvel of nature, and modern alchemy : chemical synthesis of artificial nano structure, understanding of quantum mechanics, STM/AFM, nano metal powder, ceramic nanoparticles, nano structure film, manufacture of nanoparticles using reverse micelle method, carbon nano tube, sol-gel material, nano energy material, nano catalyst nano bio material technology and spintronics.

  20. Nano technology

    Lee, In Sik

    2002-03-01

    This book is introduction of nano technology, which describes what nano technology is, alpha and omega of nano technology, the future of Korean nano technology and human being's future and nano technology. The contents of this book are nano period is coming, a engine of creation, what is molecular engineering, a huge nano technology, technique on making small things, nano materials with exorbitant possibility, the key of nano world the most desirable nano technology in bio industry, nano development plan of government, the direction of development for nano technology and children of heart.

  1. GenBank

    Benson, Dennis A.; Karsch-Mizrachi, Ilene; Lipman, David J.; Ostell, James; Rapp, Barbara A.; Wheeler, David L.

    2002-01-01

    The GenBank sequence database incorporates publicly available DNA sequences of more than 105 000 different organisms, primarily through direct submission of sequence data from individual laboratories and large-scale sequencing projects. Most submissions are made using the BankIt (web) or Sequin programs and accession numbers are assigned by GenBank staff upon receipt. Data exchange with the EMBL Data Library and the DNA Data Bank of Japan helps ensure comprehensive worldwide coverage. GenBank...

  2. Child Well-Being in Same-Sex Parent Families: Review of Research Prepared for American Sociological Association Amicus Brief.

    Manning, Wendy D; Fettro, Marshal Neal; Lamidi, Esther

    2014-08-01

    Recent legal cases before the Supreme Court of the United States were challenging federal definitions of marriage created by the Defense of Marriage Act and California's voter approved Proposition 8 which limited marriage to different-sex couples only. Social science literature regarding child well-being was being used within these cases, and the American Sociological Association sought to provide a concise evaluation of the literature through an amicus curiae brief. The authors were tasked in the assistance of this legal brief by reviewing literature regarding the well-being of children raised within same-sex parent families. This article includes our assessment of the literature, focusing on those studies, reviews and books published within the past decade. We conclude that there is a clear consensus in the social science literature indicating that American children living within same-sex parent households fare just, as well as those children residing within different-sex parent households over a wide array of well-being measures: academic performance, cognitive development, social development, psychological health, early sexual activity, and substance abuse. Our assessment of the literature is based on credible and methodologically sound studies that compare well-being outcomes of children residing within same-sex and different-sex parent families. Differences that exist in child well-being are largely due to socioeconomic circumstances and family stability. We discuss challenges and opportunities for new research on the well-being of children in same-sex parent families.

  3. GenBank

    Benson, Dennis A.; Karsch-Mizrachi, Ilene; Lipman, David J.; Ostell, James; Wheeler, David L.

    2006-01-01

    GenBank (R) is a comprehensive database that contains publicly available nucleotide sequences for more than 240 000 named organisms, obtained primarily through submissions from individual laboratories and batch submissions from large-scale sequencing projects. Most submissions are made using the web-based BankIt or standalone Sequin programs and accession numbers are assigned by GenBank staff upon receipt. Daily data exchange with the EMBL Data Library in Europe and the DNA Data Bank of Japan...

  4. GenBank

    Benson, Dennis A.; Karsch-Mizrachi, Ilene; Lipman, David J.; Ostell, James; Sayers, Eric W.

    2008-01-01

    GenBank? is a comprehensive database that contains publicly available nucleotide sequences for more than 300 000 organisms named at the genus level or lower, obtained primarily through submissions from individual laboratories and batch submissions from large-scale sequencing projects. Most submissions are made using the web-based BankIt or standalone Sequin programs, and accession numbers are assigned by GenBank? staff upon receipt. Daily data exchange with the European Molecular Biology Labo...

  5. GenBank

    Benson, Dennis A.; Cavanaugh, Mark; Clark, Karen; Karsch-Mizrachi, Ilene; Lipman, David J.; Ostell, James; Sayers, Eric W.

    2012-01-01

    GenBank? (http://www.ncbi.nlm.nih.gov) is a comprehensive database that contains publicly available nucleotide sequences for almost 260 000 formally described species. These sequences are obtained primarily through submissions from individual laboratories and batch submissions from large-scale sequencing projects, including whole-genome shotgun (WGS) and environmental sampling projects. Most submissions are made using the web-based BankIt or standalone Sequin programs, and GenBank staff assig...

  6. DETEKSI GEN-GEN PENYANDI FAKTOR VIRULENSI PADA BAKTERI VIBRIO

    Ince Ayu Khairani Kadriah

    2011-04-01

    menggunakan isolat bakteri yang diisolasi dari budidaya udang windu di berbagai daerah di Sulawesi Selatan dan Jawa. Pada penelitian ini digunakan primer spesifik untuk mendeteksi gen-gen virulen toxR gene, hemolysin (vvh gene, dan GyrB gene dengan metode PCR. Dari 35 isolat yang diisolasi, 20 isolat terdeteksi memiliki gen virulensi dan 8 di antaranya memiliki dua gen virulen. Spesies bakteri yang memiliki gen virulen adalah: V.harveyi, V. parahaemolyticus, V. mimicus, dan V. campbelli

  7. GenBank.

    Benson, D; Lipman, D J; Ostell, J

    1993-01-01

    The GenBank sequence database has undergone an expansion in data coverage, annotation content and the development of new services for the scientific community. In addition to nucleotide sequences, data from the major protein sequence and structural databases, and from U.S. and European patents is now included in an integrated system. MEDLINE abstracts from published articles describing the sequences provide an important new source of biological annotation for sequence entries. In addition to ...

  8. Nano dentistry

    Oh, S.; Park, Y.B.; Kim, S.; Jin, S.

    2014-01-01

    Nano technology in dentistry has drawn many scientists’ and clinicians’ attention to significant advances in the diagnosis, treatment, and prevention of oral disease. Also, nano materials in dentistry have been studied to overcome the physical and chemical characteristics of conventional dental materials. These interesting facts are the motivation of this special issue. The presented issue provides a variety of topics in the field of dentistry such as novel nano filled composite resin, the cytotoxicity of nanoparticles deposited on orthodontic bands, the osseointegration of 3D nano scaffold, and nano surface treated implant.

  9. Amicus brief in Ariosa v. Sequenom: Why the U.S. Supreme Court should grant the petition for a writ of certiorari

    Minssen, Timo

    2016-01-01

    I am happy to announce that on April 20th the New York attorney Robert M. Schwartz and I have filed an amicus brief at the US Supreme Court with the Berkeley-based attorney Andrew J. Dhuey as Counsel of Record. The brief, which was signed by 10 prominent European and Australian Law Professors as ......, but the pros and cons of such alternative approaches would have to be carefully considered. The Amici curiae have no stake in the parties or in the outcome of the case. A full list of the Amici is appended at the end of the brief....... overly-broad patent claims, while also permitting, well-defined, narrower claims on diagnostic technology. In our view, the current approach conflates the patent eligibility test with issues that can be more sensibly addressed within a strict and coherent assessment of novelty, non...... driving technological progress run dry. Accordingly, we urge the Supreme Court to clarify a patent eligibility test in line with its longstanding jurisprudence and in harmony with international and European law. If the CAFC’s restrictive interpretation should prevail, however, I believe...

  10. The world of Nano

    Noh, Seung Jeong; Hyun, Jun Won; An, Yong Hyeon; Lee, Sung Uk; Jee, Hye Gu; Kim, Young Seon

    2006-07-01

    The contents of this book are the beginning of nano technology, definition of nano, commercialization of nano technology, prospect of nano technology, survive with nano t-, development strategy of n-t in the U.S, and Japan, Korea, and other countries, comparison of development strategy of n-t among each country, various measurement technology for practical n-t, scanning tunneling microscopy, nano device, carbon nano tube, nano belt and nano wire, application of sensor in daily life, energy, post-Genome period and using as medicine with nano bio technology.

  11. Nano Fertilizers

    Hatice DAĞHAN

    2017-06-01

    Full Text Available Agricultural land is decreasing day by day due to erosion, environmental pollution, unconscious irrigation and fertilization. On the other hand, it is necessary to increase agricultural production in order to meet the needs of the developing industry as well as the nutritional needs of the growing population. In the recent years, nano fertilizers have begun to be produced to obtain the highest amount and quality of production from the unit area. Previous research shows that nano fertilizers cause an increase in the use efficiency of plant nutrients, reduce soil toxicity, minimize the potential adverse effects of excessive chemical fertilizer use, and reduce fertilizer application frequency. Nano fertilizers are important in agriculture to increase crop yield and nutrient use efficiency, and to reduce excessive use ofchemical fertilizers. The most important properties of these fertilizers are that they contain one or more of macro and micronutrients, they can be applied frequently in small amounts and are environmentally friendly. However, when applied at high doses, they exhibit decreasing effects on plant growth and crop yields, similar to chemical fertilizers. In this review, the definition, importan ce, and classification of nano fertilizers, their application in plant production, advantages and disadvantages and the results obtained in this field were discussed.

  12. FutureGen Project Report

    Cabe, Jim; Elliott, Mike

    2010-09-30

    This report summarizes the comprehensive siting, permitting, engineering, design, and costing activities completed by the FutureGen Industrial Alliance, the Department of Energy, and associated supporting subcontractors to develop a first of a kind near zero emissions integrated gasification combined cycle power plant and carbon capture and storage project (IGCC-CCS). With the goal to design, build, and reliably operate the first IGCC-CCS facility, FutureGen would have been the lowest emitting pulverized coal power plant in the world, while providing a timely and relevant basis for coal combustion power plants deploying carbon capture in the future. The content of this report summarizes key findings and results of applicable project evaluations; modeling, design, and engineering assessments; cost estimate reports; and schedule and risk mitigation from initiation of the FutureGen project through final flow sheet analyses including capital and operating reports completed under DOE award DE-FE0000587. This project report necessarily builds upon previously completed siting, design, and development work executed under DOE award DE-FC26- 06NT4207 which included the siting process; environmental permitting, compliance, and mitigation under the National Environmental Policy Act; and development of conceptual and design basis documentation for the FutureGen plant. For completeness, the report includes as attachments the siting and design basis documents, as well as the source documentation for the following: • Site evaluation and selection process and environmental characterization • Underground Injection Control (UIC) Permit Application including well design and subsurface modeling • FutureGen IGCC-CCS Design Basis Document • Process evaluations and technology selection via Illinois Clean Coal Review Board Technical Report • Process flow diagrams and heat/material balance for slurry-fed gasifier configuration • Process flow diagrams and heat/material balance

  13. Los mecanismos de solución de conflictos en asuntos de inversión en el NAFTA y la admisibilidad de la amicus curiae para las ONG

    Patrick Dumberry

    2010-03-01

    Full Text Available La primera parte de este artículo trata de un resumen del Tratado de Libre Comercio de Norte América (NAFTA y cuestiona acuerdos entre inversionistas y Estados (capítulo 11. Las normas  relevantes  serán analizadas bajo  la  luz de creciente cantidad  de casos. La segunda parte se ocupará del fallo reciente en el caso Methanex versus Estados Unidos de América, donde se decidió que el Tribunal tenía el poder bajo el artículo 15 (1 del UNCITRAL-reglas de arbitraje-y bajo NAFTA-capítulo 11- para aceptar un reporte amicus curiae sometido por varias organizaciones no gubernamentales (ONG. Es la primera vez dentro del contexto de NAFTA o de procesos de arbitraje entre inversores y Estado que amicus curiae haya sido aceptado por actores no estatales. El artículo examina en detalle el razonamiento del Tribunal de Arbitramento y su probable impacto en el futuro en los mecanismos de arreglo de disputas entre inversionistas – Estados.

  14. Algoritmos genéticos locales

    García-Martínez, Carlos; Lozano, Manuel

    2007-01-01

    Los Algoritmos Genéticos Locales son procedimientos que iterativamente re nan soluciones dadas. Su diferencia con procedimientos de mejora iterativa clásicos reside en el uso de operadores genéticos para realizar el re namiento. En este estudio presentamos un nuevo Algoritmo Genético Local Binario basado en un Algoritmo Genético Estacionario. Hemos comparado el Algoritmo Genético Local Binario con otros procedimientos de mejora iterativa de la literatura. Los res...

  15. GenLab, Laboratorio Virtual de Genética

    Fidel Ramírez

    2000-07-01

    Full Text Available GenLab es el nombre que tiene el software diseñado por nosotros, en el cual se modela el proceso meiótico y la fecundación en organismos diploides. El objetivo de esta aplicación es ilustrar el resultado de un cruce determinado, tratando de ser lo más ajustados a la realidad. La modelación de la reproducción sexual se realiza internamente y el GenLab se limita a presentar los resultados según el número de descendencia seleccionado para un cruce específico, esto significa que se puede escoger una gran cantidad de características para los parentales y se puede estudiar la frecuencia de estos en la descendencia. El modelo cuenta con base de datos donde están almacenados algunos de los locus de Drosophila melanogaster junto con su ubicación en centimorgans 1. EI propósito de este modelo es servir como herramienta pedagógica  y didáctica tanto en universidades como en colegios, facilitando el aprendizaje de algunos principios básicos de la genética, por lo cual puede ser usado si se cuenta con una conexión a Internet y un navegador visitando http://biologia.unal.edu.co/fidel.

  16. Nano-bio-sensing

    Carrara, Sandro

    2011-01-01

    This book examines state-of-the-art applications of nano-bio-sensing. It brings together researchers from nano-electronics and bio-technology, providing multidisciplinary content from nano-structures fabrication to bio-sensing applications.

  17. Taxonomic dissection of the genus Micrococcus: Kocuria gen. nov., Nesterenkonia gen. nov., Kytococcus gen. nov., Dermacoccus gen. nov., and Micrococcus Cohn 1872 gen. emend.

    Stackebrandt, E; Koch, C; Gvozdiak, O; Schumann, P

    1995-10-01

    The results of a phylogenetic and chemotaxonomic analysis of the genus Micrococcus indicated that it is significantly heterogeneous. Except for Micrococcus lylae, no species groups phylogenetically with the type species of the genus, Micrococcus luteus. The other members of the genus form three separate phylogenetic lines which on the basis of chemotaxonomic properties can be assigned to four genera. These genera are the genus Kocuria gen. nov. for Micrococcus roseus, Micrococcus varians, and Micrococcus kristinae, described as Kocuria rosea comb. nov., Kocuria varians comb. nov., and Kocuria kristinae comb. nov., respectively; the genus Nesterenkonia gen. nov. for Micrococcus halobius, described as Nesterenkonia halobia comb. nov.; the genus Nesterenkonia gen. nov. for Micrococcus halobius, described as Nesterenkonia halobia comb. nov.; the genus Dermacoccus gen. nov. for Micrococcus nishinomiyaensis, described as Dermacoccus nishinomiyaensis comb. nov.; and the genus Kytocossus gen. nov. for Micrococcus sedentarius, described as Kytococcus sedentarius comb. nov. M. luteus and M. lylae, which are closely related phylogenetically but differ in some chemotaxonomic properties, are the only species that remain in the genus Micrococcus Cohn 1872. An emended description of the genus Micrococcus is given [corrected].

  18. Synthesis of Boron Nano wires, Nano tubes, and Nano sheets

    Patel, R.B.; Chou, T.; Iqbal, Z.

    2014-01-01

    The synthesis of boron nano wires, nano tubes, and nano sheets using a thermal vapor deposition process is reported. This work confirms previous research and provides a new method capable of synthesizing boron nano materials. The materials were made by using various combinations of MgB 2 , Mg(BH 4 ) 2 , MCM-41, NiB, and Fe wire. Unlike previously reported methods, a nanoparticle catalyst and a silicate substrate are not required for synthesis. Two types of boron nano wires, boron nano tubes, and boron nano sheets were made. Their morphology and chemical composition were determined through the use of scanning electron microscopy, transmission electron microscopy, and electron energy loss spectroscopy. These boron-based materials have potential for electronic and hydrogen storage applications.

  19. Nano-technology and nano-toxicology

    Maynard, Robert L.

    2012-01-01

    Rapid developments in nano-technology are likely to confer significant benefits on mankind. But, as with perhaps all new technologies, these benefits are likely to be accompanied by risks, perhaps by new risks. Nano-toxicology is developing in parallel with nano-technology and seeks to define the hazards and risks associated with nano-materials: only when risks have been identified they can be controlled. This article discusses the reasons for concern about the potential effects on health of ...

  20. International Conference on NextGen Electronic Technologies

    Thalmann, Nadia; Bhaaskaran, V

    2017-01-01

    This book is a collection of keynote lectures from international experts presented at International Conference on NextGen Electronic Technologies (ICNETS2-2016). ICNETS2 encompasses six symposia covering all aspects of electronics and communications domains, including relevant nano/micro materials and devices . This volume comprises of recent research in areas like computational signal processing analysis, intelligent embedded systems, nanoelectronic materials and devices, optical and microwave technologies, VLSI design: circuits systems and application, and wireless communication networks, and the internet of things. The contents of this book will be useful to researchers, professionals, and students working in the core areas of electronics and their applications, especially to signal processing, embedded systems, and networking.

  1. Nano-technology and nano-toxicology.

    Maynard, Robert L

    2012-01-01

    Rapid developments in nano-technology are likely to confer significant benefits on mankind. But, as with perhaps all new technologies, these benefits are likely to be accompanied by risks, perhaps by new risks. Nano-toxicology is developing in parallel with nano-technology and seeks to define the hazards and risks associated with nano-materials: only when risks have been identified they can be controlled. This article discusses the reasons for concern about the potential effects on health of exposure to nano-materials and relates these to the evidence of the effects on health of the ambient aerosol. A number of hypotheses are proposed and the dangers of adopting unsubstantiated hypotheses are stressed. Nano-toxicology presents many challenges and will need substantial financial support if it is to develop at a rate sufficient to cope with developments in nano-technology.

  2. Algoritmos genéticos

    José Jesús Martínez Páez

    1998-10-01

    Full Text Available Esta técnica se basa en el concepto de evolución a través de selección de los mejores individuos, y de los operadores genéticos de selección, reproducción y mutación. Se trata entonces, de definir un espacio de soluciones para el problema que se quiere solucionar, en una cadena de bits. A esto se le conoce como la codificación del cromosoma, donde cada bit, denominado gen  tiene cierto significado especial. Inicialmente el algoritmo genera al azar muchas de estas cadenas o seres, es decir, una población, que luego confronta can un ambiente, que es el problema solucionar o función que se quiere optimizar. De esta confrontación  o evaluación a que se somete cada ser. Se obtiene información sobre cómo se comporto cada uno. A través de métodos aleatorios, pero con probabilidad de selección proporcional a su comportamiento, es decir, a mejor comportamiento mayor probabilidad, se selecciona una nueva población de seres supuestamente mejores que la generación anterior.

  3. Genève Reconnaissante

    2001-01-01

    Robert Cailliau (centre), with Geneva's Mayor Alain Vaissade (left) and Jean Erhardt, Secretary General of the Administrative Council of Geneva (right). Geneva recognised the contribution of two CERN people to the reputation of the city last Tuesday when Mayor Alain Vaissade presented the Genève Reconaissante Medal to Tim Berners-Lee and Robert Cailliau. Berners-Lee, who was not able to be present in person, invented the World Wide Web at CERN just over a decade ago, while Cailliau was his first collaborator. Quoting Cailliau, Vaissade said that whilst there is no doubt that something like the Web would have appeared sooner or later, the fact that it happened at CERN, in Geneva, was no accident. Both the Laboratory and the city are places where people from around the world meet and work in harmony.

  4. Nano devices and sensors

    Liaw, Shien-Kuei; Chung, Yung-Hui

    2016-01-01

    This volume on semiconductor devices focuses on such topics as nano-imprinting, lithography, nanowire charge-trapping, thermo-stability in nanowires, nano-electrodes, and voltage and materials used for fabricating and improving electrical characteristics of nano-materials.

  5. Book Review: Nano physics & Nano technology

    Abdolkhaled Zaree

    2012-12-01

    Full Text Available During last decades, there are a lot of emphases on studying material behavior in atomic scale. In most scientific and engineering fields, one can see the effect of nanotechnology. The aim of nanoscience is to design and fabrication of new and applicable materials. Nowadays, Nano is a popular science which chemists, physicist, doctors, engineers, financial managers and environment's fans for creating a good life via nanoscience have a great cooperation with each others. Materials in nano scale such as nanotubes and nanowires have extraordinary properties which by optimization of these properties in nano scale and then develop these properties to macro scale, they've been challenging issues. For instance, materials in nano scale improve mechanical properties of polymers and metallic materials via nano particles and on the other hand by producing a thin film on surfaces improve surface hardening. Besides, nanotechnology is in hi-tech industries such as magnetic devices, surface coating, and biomaterial, material having sensors, polymers, gels, ceramics and intelligent membrane. Nano-carbon tubes are considered intelligent due to the fact that they couple electrochemical and elastic properties simultaneously, hence have greater activation energy density in comparison with other intelligent materials. Studying nanoscience is important because it causes the life to be better. Future Materials and structures will have a lot of outstanding properties. Intelligent machines can repair, recycle and reconstruct themselves. All these features are only possible in nano zone. Nano in engineering science can provide the possibility of making light missiles for exploring space. The reduced weight can be achieved by replacing traditional materials with hybrid nanocomposites.

  6. Unleashing Gen Y: Marketing Mars to Millennials

    Leahy, Bart D.; Hidalgo, Loretta; Kloberdanz, Cassie

    2007-01-01

    Space advocates need to engage Generation Y (born 1977-1999).This outreach is necessary to recruit the next generation of scientists and engineers to explore Mars. Space advocates in the non-profit, private, and government sectors need to use a combination of technical communication, marketing, and politics, to develop messages that resonate with Gen Y. Until now, space messages have been generated by and for college-educated white males; Gen Y is much more diverse, including as much as one third minorities. Young women, too, need to be reached. My research has shown that messages emphasizing technology, fun, humor, and opportunity are the best means of reaching the Gen Y audience of 60 million (US population is 300 million). The important things space advocates must avoid are talking down to this generation, making false promises, or expecting them to "wait their turn" before they can participate. This is the MTV generation! We need to find ways of engaging Gen Y now to build a future where human beings can live and work on the planet Mars. In addition to the messages themselves, advocates need to keep up with Gen Y' s social networking and use of iPods, cell phones, and the Internet. NASA and space advocacy groups can use these tools for "viral marketing," where young people share targeted space-related information via cell phones or the Internet because they like it. Overall, Gen Y is a socially dynamic and media-savvy group; advocates' space messages need to be sincere, creative, and placed in locations where Gen Y lives. Mars messages must be memorable!

  7. Algoritmos para genómica comparativa

    Figueiras, Vasco da Rocha

    2010-01-01

    Com o surgimento da Genómica e da Proteómica, a Bioinformática conduziu a alguns dos avanços científicos mais relevantes do século XX. A Unidade de Investigação e Desenvolvimento do Biocant, parque biotecnológico de Cantanhede, assume actualmente o papel de motor no desenvolvimento da Genómica. O Biocant possui um importante sequenciador de larga escala que permite armazenar um elevado número de genomas, nomeadamente, genomas de bactérias. O estudo proposto reflecte a necessidade do Bio...

  8. The Nano Solar Case

    Hollensen, Svend; Lindgren, Peter

    2011-01-01

    ISO PAINT Nordic A/S produces roof coatings, facade painting as well as specialised products for surface treatments. The company decided that they would develop a nano solar ICT based project having the capacity to change the whole cost structure of a building, for example by a nano roof coating...

  9. Preserving Accuracy in GenBank

    Bidartondo, M.I.; Bruns, T. D.; Blackwell, M.

    2008-01-01

    GenBank, the public repository for nucleotide and protein sequences, is a critical resource for molecular biology, evolutionary biology, and ecology. While some attention has been drawn to sequence errors (1), common annotation errors also reduce the value of this database. In fact, for organisms...

  10. Teleport Generation 3 (Teleport Gen 3)

    2016-03-01

    for high- throughput multi-band and multimedia connectivity from deployed locations to DISN and DoD Information Network (DoDIN) information sources and...2016 Major Automated Information System Annual Report Teleport Generation 3 (Teleport Gen 3) Defense Acquisition Management Information Retrieval...Program Information 4 Responsible Office 4 References 4 Program Description 5 Business Case 6 Program Status 8 Schedule 9

  11. Divergência genética entre genótipos de frangos tipo caipira

    R. C. Veloso

    2015-10-01

    Full Text Available RESUMOObjetivou-se com este trabalho verificar a divergência genética entre sete genótipos de frangos tipo caipira da linhagem Redbro utilizando as características de desempenho por meio de técnicas de análise multivariada. Foram utilizados 840 pintos de um dia, machos, distribuídos em delineamento inteiramente ao acaso, dos seguintes genótipos: Caboclo, Carijó, Colorpak, Gigante Negro, Pesadão Vermelho, Pescoço Pelado e Tricolor. Após a consistência dos dados, foram avaliadas as seguintes variáveis: ganho em peso médio diário, consumo de ração médio diário e conversão alimentar, para os períodos: 1 a 28, 1 a 56, 1 a 70 e 1 a 84 dias de idade; peso corporal ao nascimento, aos 28, 56, 70 e aos 84 dias de idade. O desempenho dos genótipos foi avaliado por meio da análise de variância multivariada e da função discriminante linear de Fisher, usando os testes do maior autovalor de Roy e da união-interseção de Roy para as comparações múltiplas. O estudo da divergência genética foi feito por meio da análise por variáveis canônicas e pelo método de otimização de Tocher. Os genótipos Caboclo e Gigante Negro apresentaram médias canônicas diferentes dos demais genótipos. As duas primeiras variáveis canônicas explicaram 97,41% da variação entre os genótipos. A divergência genética entre os genótipos avaliados permitiu a formação de quatro grupos com os seguintes genótipos: grupo 1 - Colorpak; grupo 2 - Pesadão Vermelho e Pescoço Pelado; grupo 3 - Carijó e Tricolor; e grupo 4 - Caboclo e Gigante Negro.

  12. Next Gen One Portal Usability Evaluation

    Cross, E. V., III; Perera, J. S.; Hanson, A. M.; English, K.; Vu, L.; Amonette, W.

    2018-01-01

    Each exercise device on the International Space Station (ISS) has a unique, customized software system interface with unique layouts / hierarchy, and operational principles that require significant crew training. Furthermore, the software programs are not adaptable and provide no real-time feedback or motivation to enhance the exercise experience and/or prevent injuries. Additionally, the graphical user interfaces (GUI) of these systems present information through multiple layers resulting in difficulty navigating to the desired screens and functions. These limitations of current exercise device GUI's lead to increased crew time spent on initiating, loading, performing exercises, logging data and exiting the system. To address these limitations a Next Generation One Portal (NextGen One Portal) Crew Countermeasure System (CMS) was developed, which utilizes the latest industry guidelines in GUI designs to provide an intuitive ease of use approach (i.e., 80% of the functionality gained within 5-10 minutes of initial use without/limited formal training required). This is accomplished by providing a consistent interface using common software to reduce crew training, increase efficiency & user satisfaction while also reducing development & maintenance costs. Results from the usability evaluations showed the NextGen One Portal UI having greater efficiency, learnability, memorability, usability and overall user experience than the current Advanced Resistive Exercise Device (ARED) UI used by astronauts on ISS. Specifically, the design of the One-Portal UI as an app interface similar to those found on the Apple and Google's App Store, assisted many of the participants in grasping the concepts of the interface with minimum training. Although the NextGen One-Portal UI was shown to be an overall better interface, observations by the test facilitators noted specific exercise tasks appeared to have a significant impact on the NextGen One-Portal UI efficiency. Future updates to

  13. Gen IV Materials Handbook Implementation Plan

    Rittenhouse, P.; Ren, W.

    2005-01-01

    A Gen IV Materials Handbook is being developed to provide an authoritative single source of highly qualified structural materials information and materials properties data for use in design and analyses of all Generation IV Reactor Systems. The Handbook will be responsive to the needs expressed by all of the principal government, national laboratory, and private company stakeholders of Gen IV Reactor Systems. The Gen IV Materials Handbook Implementation Plan provided here addresses the purpose, rationale, attributes, and benefits of the Handbook and will detail its content, format, quality assurance, applicability, and access. Structural materials, both metallic and ceramic, for all Gen IV reactor types currently supported by the Department of Energy (DOE) will be included in the Gen IV Materials Handbook. However, initial emphasis will be on materials for the Very High Temperature Reactor (VHTR). Descriptive information (e.g., chemical composition and applicable technical specifications and codes) will be provided for each material along with an extensive presentation of mechanical and physical property data including consideration of temperature, irradiation, environment, etc. effects on properties. Access to the Gen IV Materials Handbook will be internet-based with appropriate levels of control. Information and data in the Handbook will be configured to allow search by material classes, specific materials, specific information or property class, specific property, data parameters, and individual data points identified with materials parameters, test conditions, and data source. Details on all of these as well as proposed applicability and consideration of data quality classes are provided in the Implementation Plan. Website development for the Handbook is divided into six phases including (1) detailed product analysis and specification, (2) simulation and design, (3) implementation and testing, (4) product release, (5) project/product evaluation, and (6) product

  14. Carbon nano tubes embedded in polymer nano fibers

    Dror, Y.; Kedem, S.; Khalfin, R.L.; Paz, Y.; Cohenl, Y.; Salalha, Y.; Yarin, A.L.; Zussman, A.

    2004-01-01

    Full Text: The electro spinning process was used successfully to embed Multi-walled carbon nano tubes (MWCNTs) and single-walled carbon nano tubes (SWCNTs) in a matrix of poly(ethylene oxide) (PEO) forming composite nano fibers. Initial dispersion of SWCNTs in water was achieved by the use of an amphphilic alternating copolymer of styrene and sodium maleate. MWNT dispersion was achieved by ionic and nonionic surfactants. The distribution and conformation of the nano tubes in the nano fibers were studied by transmission electron microscopy (TEM). Oxygen plasma etching was used to expose the nano tubes within the nano fibers to facilitate direct observation. Nano tube alignment within the nano fibers was shown to depend strongly on the quality of the initial dispersions. Well-dispersed and separated nano tubes were embedded in a straight and aligned form while entangled non-separated nano tubes were incorporated as dense aggregates. X-ray diffraction demonstrated a high degree of orientation of the PEO crystals in the electro spun nano fibers with embedded SWCNTs, whereas incorporation of MVCNTs had a detrimental effect on the polymer orientation. Composite polymer nano fibers containing dispersed phases of nanometric TiO 2 particles and MWCNTs were also prepared electro spinning. In this case, the polymer matrix was poly(acrylonitrile) (PAN). The morphology and possible applications of these composite nano fibers will be discussed

  15. NanoAODs

    Husova, Lucia Anna

    2017-01-01

    The scientist on LHC experiment analyse a huge amount of data every day on the Grid. Thus new methods are requested, how to make the analysis more efficient. The NanoAOD is a derived dataset from AOD, where only information necessary for the analysis is stored. Thus the analysis can be more than two times faster, because of the smaller file size, which can be read faster on the Grid. The main goal of this summer student project was to help other users to start using NanoAODs by rewriting their user tasks. Two example users tasks were converted to NanoAODs and tested with the local train test. A speed up of 3.5 was reached. The results of the analysis tasks are identical independent if they use AODs or NanoAODs.

  16. Nano-composite materials

    Lee, Se-Hee; Tracy, C. Edwin; Pitts, J. Roland

    2010-05-25

    Nano-composite materials are disclosed. An exemplary method of producing a nano-composite material may comprise co-sputtering a transition metal and a refractory metal in a reactive atmosphere. The method may also comprise co-depositing a transition metal and a refractory metal composite structure on a substrate. The method may further comprise thermally annealing the deposited transition metal and refractory metal composite structure in a reactive atmosphere.

  17. Optiske nano-fibre

    Rubahn, Horst-Günter; Simonsen, Adam Cohen

    2003-01-01

    Forskere ved Syddansk Universitet har udviklet organiske nano-aggregater, som gør det muligt under meget kontrollerede forhold at studere optiske fænomener på skalaer mindre end lysets bølgelængde.......Forskere ved Syddansk Universitet har udviklet organiske nano-aggregater, som gør det muligt under meget kontrollerede forhold at studere optiske fænomener på skalaer mindre end lysets bølgelængde....

  18. Cancer Nano medicine

    Li, H.; Pike, M.M.; Luo, X.; Liu, L.H.

    2013-01-01

    Bioengineered nano materials have inspired revolutionary imaging and drug delivery methods whose clinical application in cancer research has resulted in powerful medical devices for early diagnosis, treatment, and prevention of cancer. Recent advances in super imaging agents have resulted in improved resolution and sensitivity. For instance, fluorescent quantum dots with wavelength-tunable emissions, plasmon-resonant gold nano structures with shape-controlled near-infrared absorptions, and MRI-active iron oxide nanoparticles are well-established molecular imaging probes for noninvasive cancer imaging. Nano materials are also considered to be the most effective vectors that can break through transport bio barriers and deliver a constant dose of multiple therapeutic agents to tumors and intracellular endocytic compartments for cancer gene therapy, immunotherapy, or chemotherapy. Furthermore, nano wire- or nano tube-based electronic devices demonstrate extraordinary sensitivity capable of detection at the single molecule or protein level. It is anticipated that developing nano technology-driven imaging, sensing, and therapeutic systems will dramatically advance cancer research and clinical treatments.

  19. Genética humana e sociedade

    Rosa, Vivian Leyser da

    2000-01-01

    Tese (doutorado) - Universidade Federal de Santa Catarina, Centro de Ciências da Educação. Análise do campo de estudos sobre o entendimento público da ciência, distinguindo os modelos de deficit cognitivo e interativo, bem como suas implicações na esfera educacional. Estudo do panorama dos avanços atuais da genética humana, do ponto de vista científico, ético e social. Análise de aspectos relativos ao ensino de genética humana nos cursos de graduação da área da saúde, em nove Universidades...

  20. A new member of troglobitic Carychiidae, Koreozospeum nodongense gen. et sp. n. (Gastropoda, Eupulmonata, Ellobioidea) is described from Korea.

    Jochum, Adrienne; Prozorova, Larisa; Sharyi-Ool, Mariana; Páll-Gergely, Barna

    2015-01-01

    A new genus of troglobitic Carychiidae Jeffreys, 1830 is designated from Nodong Cave, North Chungcheong Province, Danyang, South Korea. This remarkable find represents a great range extension and thus, a highly distant distribution of troglobitic Carychiidae in Asia. The Zospeum-like, carychiid snails were recently included, without a formal description, in records documenting Korean malacofauna. The present paper describes Koreozospeum Jochum & Prozorova, gen. n. and illustrates the type species, Koreozospeum nodongense Lee, Prozorova & Jochum, sp. n. using novel Nano-CT images, including a video, internal shell morphology, SEM and SEM-EDX elemental compositional analysis of the shell.

  1. Targeted NextGen Capabilities for 2025

    2011-11-01

    increased arrival capacity to single runways by reducing longitudinal wake separation standards for Instrument Flight Rules ( IFR ) operations under certain...b. ABSTRACT unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Targeted NextGen Capabilities...The examples cited are not intended to cover every aircraft and every flight. In some instances, the available capabilities for 2025 will not be

  2. Market share scenarios for Gen-DIII and gen-IV reactors in Europe

    Roelofs, F.; Heek, A. V.; Durpel, L. V. D.

    2008-01-01

    Nuclear energy is back on the agenda worldwide in order to meet growing energy demand and especially the growth in electricity demand. Many objectives direct to an increased use of nuclear energy, i.e. minimising energy costs, reducing climate change effects and others. In the light of the potential renewed growth of nuclear energy, the public demands a clear view on what nuclear energy may contribute towards meeting these objectives and especially how nuclear energy may address some socio-political obstructions with respect to economics, radioactive waste, safety and proliferation of fissile materials. To address these questions, the future nuclear reactor park mix in Europe has been analysed applying an integrated dynamic process modelling technique. Various market share scenarios for nuclear energy are derived including sub-variants with regard to the intra-nuclear options. In the analyses, it is assumed that different types of new reactors may be built, taking into account the introduction date of considered Gen-Ill (i.e. EPR) and Gen-IV (i.e. SCWR, HTR, FR) reactors, and the economic evaluation of the complete fuel cycle. The assessment was undertaken using the DANESS code (Dynamic Analysis of Nuclear Energy System Strategies). The analyses show that given the considered realistic nuclear energy demand and given a limited number of available Gen-III and Gen-IV reactor types, the future European nuclear park will exist of combinations of Gen-III and Gen-IV reactors. This mix will always consist of a set of reactor types each having its specific strengths. The analyses also highlight the triggers influencing the choice between different nuclear energy deployment scenarios. (authors)

  3. ON NANO Λg-CLOSED SETS

    Rajasekaran, Ilangovan; Nethaji, Ochanan

    2017-01-01

    Abstaract−In this paper, we introduce nano ∧g-closed sets in nano topological spaces. Some properties of nano ∧g-closed sets and nano ∧g-open sets are weaker forms of nano closed sets and nano open sets

  4. Recommendations and Requirements for GenCade Simluations

    2014-08-01

    will report whether or not GenCade is enabled. If GenCade is disabled , the user will need a new license that includes GenCade...any depth but usually are not deeper than the seaward edge of the surf - zone. In the same way that some shorelines are less desirable for use in...Conference, 1919–1937. ASCE. Wang, P., N. C. Kraus, and R. A. Davis. 1998. Total rate of longshore sediment transport in the surf zone: Field

  5. Novel plasmon nano-lasers

    Hill, M.T.; Marell, M.J.H.

    2010-01-01

    We will discuss some of the latest developments in metallic and plasmonic nano-lasers. Furthermore we will present our latest results on further miniaturization of electrically pumped plasmonic nano-lasers and also DFB Plasmon mode devices.

  6. Nano lasers in photonic VLSI

    Hill, M.T.; Oei, Y.S.; Smit, M.K.

    2007-01-01

    We examine the use of micro and nano lasers to form digital photonic VLSI building blocks. Problems such as isolation and cascading of building blocks are addressed, and the potential of future nano lasers explored.

  7. Applications of Nano-optics.

    Zhou, Changhe; Fainman, Yeshaiahu; Sheng, Yunlong

    2011-11-01

    As nanoscale fabrication techniques advance, nano-optics continues to offer enabling solutions to numerous practical applications for information optics. This Applied Optics feature issue focuses on the Application of Nano-optics. © 2011 Optical Society of America

  8. Environmental silicate nano-biocomposites

    Pollet, Eric

    2012-01-01

    Environmental Silicate Nano-Biocomposites focuses on nano-biocomposites, which are obtained by the association of silicates such as bioclays with biopolymers. By highlighting recent developments and findings, green and biodegradable nano-composites from both renewable and biodegradable polymers are explored. This includes coverage of potential markets such as packaging, agricultures, leisure and the fast food industry. The knowledge and experience of more than twenty international experts in diverse fields, from chemical and biochemical engineering to applications, is brought together in four different sections covering: Biodegradable polymers and Silicates, Clay/Polyesters Nano-biocomposites, Clay/Agropolymers Nano-biocomposites, and Applications and biodegradation of Nano-biocomposites. By exploring the relationships between the biopolymer structures, the processes, and the final properties Environmental Silicate Nano-Biocomposites explains how to design nano-materials to develop new, valuable, environmenta...

  9. O impacto da genética na asma infantil

    Pinto,Leonardo A.; Stein,Renato T.; Kabesch,Michael

    2008-01-01

    OBJETIVO: Apresentar os resultados dos estudos mais importantes e recentes sobre a genética da asma. Estes dados devem auxiliar os clínicos gerais a compreender o impacto da genética sobre este distúrbio complexo e como os genes e polimorfismos influenciam a asma e a atopia. FONTES DOS DADOS: Os dados foram coletados do banco de dados MEDLINE. Os estudos de associação genética foram selecionados do Genetic Association Database, um repositório de estudos de associação genética de doenças e dis...

  10. Aconselhamento genético Genetic counseling

    João Monteiro de Pina-Neto

    2008-08-01

    Full Text Available OBJETIVO: Esta revisão sobre aconselhamento genético (AG teve o objetivo de mostrar os conceitos atuais e os princípios filosóficos e éticos aceitos na grande maioria dos países e recomendados pela Organização Mundial da Saúde, as fases do processo, seus resultados e o impacto psicológico de uma doença genética em uma família. FONTES DOS DADOS: Os conceitos apresentados são baseados em uma síntese histórica da literatura sobre AG desde a década de 1930 até o momento atual, sendo que os artigos citados representam os principais trabalhos publicados e que hoje fundamentam a teoria e a prática do AG. SÍNTESE DOS DADOS: O AG modernamente é definido como um processo de comunicação que trata dos problemas humanos relacionados à ocorrência de uma doença genética em uma família. É fundamental que os profissionais da saúde conheçam os aspectos psicológicos desencadeados pela doença genética e como estes aspectos podem ser manejados. Vivemos ainda na genética humana e médica uma fase de predomínio dos aspectos técnicos e científicos e de pouca ênfase no estudo das reações emocionais e dos processos de adaptação das pessoas a estas doenças, o que leva ao baixo entendimento dos clientes sobre os fatos ocorridos, com conseqüências negativas sobre a vida familiar e para a sociedade. CONCLUSÕES: Conclui-se pela necessidade de que as famílias com doenças genéticas sejam encaminhadas para AG e que os profissionais desta área invistam mais na humanização do atendimento, desenvolvendo mais as técnicas do AG psicológico não-diretivo.OBJECTIVE: The objective of this review of genetic counseling (GC is to describe the current concepts and philosophical and ethical principles accepted by the great majority of countries and recommended by the World Health Organization, the stages of the process, its results and the psychological impact that a genetic disease has on a family. SOURCES: The concepts presented are

  11. ACCELERATING NANO-TECHNOLOGICAL

    Jensen, Jens Stissing; Koch, Christian

    2007-01-01

    By viewing the construction industry as a technological innovation system (TIS) this paper discusses possible initiatives to accelerate nanotechnological innovations. The point of departure is a recent report on the application of nano-technology in the Danish construction industry, which concludes...... of the system are furthermore poorly equipped at identifying potentials within high-tech areas. In order to exploit the potentials of nano-technology it is thus argued that an alternative TIS needs to be established. Initiatives should identify and support “incubation rooms” or marked niches in order...

  12. Nano-electromembrane extraction

    Payán, María D Ramos; Li, Bin; Petersen, Nickolaj J.

    2013-01-01

    as extraction selectivity. Compared with conventional EME, the acceptor phase volume in nano-EME was down-scaled by a factor of more than 1000. This resulted in a very high enrichment capacity. With loperamide as an example, an enrichment factor exceeding 500 was obtained in only 5 min of extraction...... electrophoresis (CE). In that way the sample preparation performed by nano-EME was coupled directly with a CE separation. Separation performance of 42,000-193,000 theoretical plates could easily be obtained by this direct sample preparation and injection technique that both provided enrichment as well...

  13. TidGen Power System Commercialization Project

    Sauer, Christopher R. [President & CEO; McEntee, Jarlath [VP Engineering & CTO

    2013-12-30

    ORPC Maine, LLC, a wholly-owned subsidiary of Ocean Renewable Power Company, LLC (collectively ORPC), submits this Final Technical Report for the TidGen® Power System Commercialization Project (Project), partially funded by the U.S. Department of Energy (DE-EE0003647). The Project was built and operated in compliance with the Federal Energy Regulatory Commission (FERC) pilot project license (P-12711) and other permits and approvals needed for the Project. This report documents the methodologies, activities and results of the various phases of the Project, including design, engineering, procurement, assembly, installation, operation, licensing, environmental monitoring, retrieval, maintenance and repair. The Project represents a significant achievement for the renewable energy portfolio of the U.S. in general, and for the U.S. marine hydrokinetic (MHK) industry in particular. The stated Project goal was to advance, demonstrate and accelerate deployment and commercialization of ORPC’s tidal-current based hydrokinetic power generation system, including the energy extraction and conversion technology, associated power electronics, and interconnection equipment capable of reliably delivering electricity to the domestic power grid. ORPC achieved this goal by designing, building and operating the TidGen® Power System in 2012 and becoming the first federally licensed hydrokinetic tidal energy project to deliver electricity to a power grid under a power purchase agreement in North America. Located in Cobscook Bay between Eastport and Lubec, Maine, the TidGen® Power System was connected to the Bangor Hydro Electric utility grid at an on-shore station in North Lubec on September 13, 2012. ORPC obtained a FERC pilot project license for the Project on February 12, 2012 and the first Maine Department of Environmental Protection General Permit issued for a tidal energy project on January 31, 2012. In addition, ORPC entered into a 20-year agreement with Bangor Hydro Electric

  14. Gen IV Materials Handbook Functionalities and Operation

    Ren, Weiju

    2009-01-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  15. Gen IV. Technical and economical aspects

    Kaluzny, Y.; Legee, F.

    2010-01-01

    In this presentation author deals with development of nuclear reactor type of Generation IV. He concluded that: - Nuclear energy is competitive with regards to the other generation sources; Its competitiveness also increases with CO 2 cost. Considering the nuclear cost breakdown of LWR reactors, it turns out that the uranium is currently not in the range of a threshold for FBR deployment; - The global balance of uranium supply and demand and also innovation required to fulfil GEN IV objectives would probably imply the emergence of fast reactor competitiveness after the turn of the mid-century; - We shall need fast reactors in the coming decade.

  16. Gen IV Materials Handbook Functionalities and Operation

    Ren, Weiju [ORNL

    2009-12-01

    This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbook access.

  17. NanoLaunch

    Jones, Jonathan; Harris, Lawanna

    2015-01-01

    NASA's NanoLaunch effort will provide the framework to mature both Earth-to-orbit and on-orbit propulsion and avionics technologies while also providing affordable, dedicated access to low-Earth orbit for CubeSat-class payloads. The project will also serve as an early career personnel training opportunity with mentors to gain hands-on project experience.

  18. Editorial Emerging Multifunctional Nano structures

    Fan, H.; Lu, Y.; Ramanath, G.; Pomposo, J.A.

    2009-01-01

    The interest in emerging nano structures is growing exponentially since they are promising building blocks for advanced multifunctional nano composites. In recent years, an evolution from the controlled synthesis of individual monodisperse nanoparticles to the tailored preparation of hybrid spherical and also unsymmetrical multiparticle nano structures is clearly observed. As a matter of fact, the field of nano structures built around a nano species such as inside, outside, and next to a nanoparticle is becoming a new evolving area of research and development with potential applications in improved drug delivery systems, innovative magnetic devices, biosensors, and highly efficient catalysts, among several others Emerging nano structures with improved magnetic, conducting and smart characteristics are currently based on the design, synthesis, characterization and modeling of multifunctional nano object-based materials. In fact, core-shell nanoparticles and other related complex nano architectures covering a broad spectrum of materials (from metal and metal oxide to fused carbon, synthetic polymer, and bio polymer structures) to nano structure morphologies (spherical, cylindrical, star-like, etc.) are becoming the main building blocks for next generation of drug delivery systems, advanced sensors and biosensors, or improved nano composites. The five papers presented in this special issue examine the preparation and characterization of emerging multifunctional materials, covering from hybrid asymmetric structures to engineering nano composites.

  19. Towards an International Culture: Gen Y Students and SNS?

    Lichy, Jessica

    2012-01-01

    This article reports the findings of a small-scale investigation into the Internet user behaviour of generation Y (Gen Y) students, with particular reference to social networking sites. The study adds to the literature on cross-cultural Internet user behaviour with specific reference to Gen Y and social networking. It compares how a cohort of…

  20. Radiation induced nano structures

    Ibragimova, E.M.; Kalanov, M.U.; Khakimov, Z.

    2006-01-01

    Full text: Nanometer-size silicon clusters have been attracting much attention due to their technological importance, in particular, as promising building blocks for nano electronic and nano photonic systems. Particularly, silicon wires are of great of interest since they have potential for use in one-dimensional quantum wire high-speed field effect transistors and light-emitting devices with extremely low power consumption. Carbon and metal nano structures are studied very intensely due to wide possible applications. Radiation material sciences have been dealing with sub-micron objects for a long time. Under interaction of high energy particles and ionizing radiation with solids by elastic and inelastic mechanisms, at first point defects are created, then they form clusters, column defects, disordered regions (amorphous colloids) and finally precipitates of another crystal phase in the matrix. Such irradiation induced evolution of structure defects and phase transformations was observed by X-diffraction techniques in dielectric crystals of quartz and corundum, which exist in and crystal modifications. If there is no polymorphism, like in alkali halide crystals, then due to radiolysis halogen atoms are evaporated from the surface that results in non-stoichiometry or accumulated in the pores formed by metal vacancies in the sub-surface layer. Nano-pores are created by intensive high energy particles irradiation at first chaotically and then they are ordered and in part filled by inert gas. It is well-known mechanism of radiation induced swelling and embrittlement of metals and alloys, which is undesirable for construction materials for nuclear reactors. Possible solution of this problem may come from nano-structured materials, where there is neither swelling nor embrittlement at gas absorption due to very low density of the structure, while strength keeps high. This review considers experimental observations of radiation induced nano-inclusions in insulating

  1. Factors Influencing Retention of Gen Y and Non-Gen Y Teachers Working at International Schools in Asia

    Fong, Hoi Wah Benny

    2018-01-01

    Quantitative studies on international-school teacher retention are few, especially studies that differentiate between Gen Y and non-Gen Y teachers. This article reports on the findings of a study that examined the relationship of job satisfaction factors to the likelihood of contract renewal by international-school teachers. Results from the study…

  2. Heat and power from MicroGen

    Anon.

    1999-10-01

    This paper reports on the design of a domestic gas-fired cogeneration system developed to replace the central heating boiler. Technical details of the MicroGen demonstration unit are given, and the use of a Linear Free Piston Stirling Engine as the prime mover, and the results of modelling studies of energy demand indicating cost savings compared to conventional boilers are discussed. The enhancement of the benefits of micro-cogeneration through use of thermal and power storage and energy demand management, and the impact of micro-cogeneration on energy use in the home are considered. The UK and European Commission's targets for increased cogeneration capacity are noted.

  3. NextGen Future Safety Assessment Game

    Ancel, Ersin; Gheorghe, Adrian; Jones, Sharon Monica

    2011-01-01

    The successful implementation of the next generation infrastructure systems requires solid understanding of their technical, social, political and economic aspects along with their interactions. The lack of historical data that relate to the long-term planning of complex systems introduces unique challenges for decision makers and involved stakeholders which in turn result in unsustainable systems. Also, the need to understand the infrastructure at the societal level and capture the interaction between multiple stakeholders becomes important. This paper proposes a methodology in order to develop a holistic approach aiming to provide an alternative subject-matter expert (SME) elicitation and data collection method for future sociotechnical systems. The methodology is adapted to Next Generation Air Transportation System (NextGen) decision making environment in order to demonstrate the benefits of this holistic approach.

  4. The GenDev Curriculum Development Workshop.

    D'cunha, J

    1997-01-01

    This article describes the second Curriculum Development Workshop held in May 1997 at the Asian Institute of Technology (AIT) in Bangkok, Thailand. The workshop aimed to review critically and restructure the Gender and Development Studies (GenDev) curriculum and to assess AIT's role in training gender experts for the region. Participants included 22 people from 16 countries in Asia, Europe, and the US who were teaching graduate students about gender issues and who were activists with nongovernmental organizations working on gender issues. It was determined that the following were required courses: Culture, Knowledge and Gender Relations; Gender, Technology, and Development; Principles of Gender Research and Methodology in Science and Technology; and Gender Analysis and Field Methods. Other suggested core courses included: Gender and Natural Resource Management; Enterprise Management, Technology, and Gender; Gender and Agrarian Reform; Urbanization: A Gender Perspective; Gender-Responsive Development Planning; and Gender and Economic Change: Past and Present Concerns. Participants distinguished between GenDev courses offered to anyone attending AIT and training courses designed to produce gender experts in the region. The aim of training courses for AIT graduate students was to sensitize potential managers, technologists, and others on gender issues and to create awareness of the importance of including gender perspectives within decision-making, policy formation, and implementation. Training courses to produce gender experts should be directed to those with a prior background in gender studies and include gender analysis in field methods. Participants agreed that there should be an independent and autonomous field of gender and development studies. Participants made six recommendations for such a field of study.

  5. Nano semiconducting materials

    Saravanan, R

    2016-01-01

    The main focus of the present book is the characterization of a number of nano-semiconducting materials, using such techniques as powder X-ray diffraction, UV-visible spectrophotometry, Raman spectrometry, scanning electron microscopy, transmission electron microscopy and vibrating sample magnetometry. The materials studied include ZnS, TiO2, NiO, Ga doped ZnO, Mn doped SnO2, Mn doped CeO2 and Mn doped ZrO2.

  6. Combinatorial Nano-Bio Interfaces.

    Cai, Pingqiang; Zhang, Xiaoqian; Wang, Ming; Wu, Yun-Long; Chen, Xiaodong

    2018-06-08

    Nano-bio interfaces are emerging from the convergence of engineered nanomaterials and biological entities. Despite rapid growth, clinical translation of biomedical nanomaterials is heavily compromised by the lack of comprehensive understanding of biophysicochemical interactions at nano-bio interfaces. In the past decade, a few investigations have adopted a combinatorial approach toward decoding nano-bio interfaces. Combinatorial nano-bio interfaces comprise the design of nanocombinatorial libraries and high-throughput bioevaluation. In this Perspective, we address challenges in combinatorial nano-bio interfaces and call for multiparametric nanocombinatorics (composition, morphology, mechanics, surface chemistry), multiscale bioevaluation (biomolecules, organelles, cells, tissues/organs), and the recruitment of computational modeling and artificial intelligence. Leveraging combinatorial nano-bio interfaces will shed light on precision nanomedicine and its potential applications.

  7. Metode Transfer Asam Nukleat sebagai Dasar Terapi Gen

    Novi Silvia Hardiany

    2017-01-01

    Full Text Available Kemajuan ilmu biologi molekuler memberikan manfaat dalam bidang kedokteran untuk mengembangkanterapi gen. Tujuan terapi gen adalah untuk memperbaiki kerusakan gen atau mengganti gen yang rusakdengan gen yang normal. Pemindahan gen dilakukan dengan teknik transfeksi. Transfeksi merupakanproses pemindahan asam nukleat baik menggunakan vektor virus (transduksi atau menggunakan metodenonviral yaitu zat kimia, lipid dan metode fisik. Vektor virus yang digunakan pada transduksi adalahretrovirus, adenovirus, adeno-associated virus (AAV dan herpes simplex virus (HSV. Keberhasilantransfeksi ditentukan oleh berbagai faktor yang dapat dapat dinilai dengan menggunakan reporter sepertigreen fluorescence protein (GFP. Kata Kunci: terapi gen, transfeksi non viral, transduksi, vektor virus   Methods of Nucleic Acid Transfer as Basic Gene Therapy Abstract The advancement of molecular biology provides benefit in the field of medicine to develop genetherapy. The aim of gene therapy is to repair the genetic damage or to replace damaged gene with thenormal gene. Delivery of gene is carried out by transfection technique, a technique to transfer nucleic acidinto eukaryote cells either using viral vectors (known as transduction, and also using non viral methodsuch as chemical substance, lipid and physical method. Some of the viral vectors used in the transductionare retrovirus, adenovirus, Adeno-associated virus (AAV and Herpes Simplex Virus (HSV. The success oftransfection is determined by various factors which can be assessed using several reporters such as GreenFluorescence Protein (GFP. Key words: gene therapy, non viral transfection, transduction, viral vector. Normal 0 false false false IN X-NONE X-NONE

  8. Modelo poblacional con algoritmos genéticos

    Veliz Quintero, Eduardo; Rodriguez Ojeda, Luis

    2009-01-01

    Para el desarrollo de este trabajo, “MODELO POBLACIONAL CON ALGORITMOS GENÉTICOS”, he investigado la rama de la inteligencia artificial, como son los algoritmos genéticos. Primero presento en forma general los aspectos que envuelven los algoritmos genéticos, parto de la necesidad de optimizar, así como su historia y posibles aplicaciones y luego he cubierto detalladamente todo lo que pude investigar sobre la teoría de los algoritmos genéticos, sus fundamentos matemáticos, tipos de algoritmos ...

  9. Sobre el significado del descubrimiento del gen FOXP2

    Longa Martínez, Víctor Manuel

    2006-01-01

    El reciente descubrimiento del gen FOXP2 ha ofrecido la primera evidencia clara de la base genética del lenguaje, mostrando una correlación inequívoca desde la perspectiva genética entre una versión mutada de F0XP2 y los trastornos lingüísticos de diferente tipo sufridos por una familia inglesa, conocida como KE. El objetivo central del presente trabajo es discutir diferentes aspectos relacionados con tal descubrimiento; especialmente, la discusión del significado de FOXP2 con ...

  10. Nano materials for Energy and Environmental Applications

    Srinivasan, S.; Kannan, A.M.; Kothurkar, N.; Khalil, Y.; Kuravi, S.

    2015-01-01

    Nano materials enabled technologies have been seamlessly integrated into applications such as aviation and space, chemical industry, optics, solar hydrogen, fuel cell, batteries, sensors, power generation, aeronautic industry, building/construction industry, automotive engineering, consumer electronics, thermoelectric devices, pharmaceuticals, and cosmetic industry. Clean energy and environmental applications often demand the development of novel nano materials that can provide shortest reaction pathways for the enhancement of reaction kinetics. Understanding the physicochemical, structural, microstructural, surface, and interface properties of nano materials is vital for achieving the required efficiency, cycle life, and sustain ability in various technological applications. Nano materials with specific size and shape such as nano tubes, nano fibers/nano wires, nano cones, nano composites, nano rods, nano islands, nanoparticles, nanospheres, and nano shells to provide unique properties can be synthesized by tuning the process conditions.

  11. A novel approach to nano topology via neutrosophic sets

    M. Lellis Thivagar; Saeid Jafari; V. Sutha Devi; V. Antonysamy

    2018-01-01

    The main objective of this study is to introduce a new hybrid intelligent structure called Neutrosophic nano topology. Fuzzy nano topology and intuitionistic nano topology can also be deduced from the neutrosophic nano topology. Based on the neutrosophic nano approximations we have classified neutrosophic nano topology. Some properties like neutrosophic nano interior and neutrosophic nano closure are derived.

  12. Nano surface generation of grinding process using carbon nano tubes

    Nano surface finish has become an important parameter in the semiconductor, optical, electrical and mechanical industries. The materials used in these industries are classified as difficult to machine materials such as ceramics, glasses and silicon wafers. Machining of these materials up to nano accuracy is a great ...

  13. To be nano or not to be nano?

    Joachim, Christian

    2005-02-01

    Nanomaterials, nanostructures, nanostructured materials, nanoimprint, nanobiotechnology, nanophysics, nanochemistry, radical nanotechnology, nanosciences, nanooptics, nanoelectronics, nanorobotics, nanosoldiers, nanomedecine, nanoeconomy, nanobusiness, nanolawyer, nanoethics to name a few of the nanos. We need a clear definition of all these burgeoning fields for the sake of the grant attribution, for the sake of research program definition, and to avoid everyone being lost in so many nanos.

  14. 1D Nano materials 2012

    Yanqiu Zhu, Y.; Ma, R.; Whitby, R.; Acquah, S.

    2013-01-01

    We witnessed an initial hyped period and enthusiasm on carbon nano tubes in the 1990s later went through a significant expansion into nano tubes of other materials (metal di chalcogenides, boron nitride, etc.) as well as various nano wires and nano rods. While much of the hype might have gone, the research on one-dimensional (1D) nano materials has matured as one of the most active research areas within the nano science and nano technology community, flourishing with ample, exciting, and new research opportunities. Just like any other research frontier, researchers working in the 1D nano materials field are constantly striving to develop new fundamental science as well as potential applications. It remains a common belief that versatility and tunability of 1D nano materials would challenge many new rising tasks coming from our resource and energy demanding modern society. The traditional semiconductor industry has produced so many devices and systems from transistors, sensors, lasers, and LEDs to more sophisticated solar panels, which are now part of our daily lives. By down sizing the core components or parts to 1D form, one might wonder how fundamentally the dimensionality and morphology would impact the device performance, this is, as always, requiring us to fully understand the structure-property relationship in 1D nano materials. It may be equally crucial in connecting discovery-driven fundamental science to market-driven technology industry concerning potentially relevant findings derived from these novel materials. The importance of a platform that allows active researchers in this field to present their new development in a timely and efficient manner is therefore self-evident. Following the success of two early special issues devoted to 1D nano materials, this is the third one in a row organized by the same group of guest editors, attesting that such a platform has been well received by the readers

  15. TrayGen: Arranging objects for exhibition and packaging

    Yang, Yongliang; Huang, Qixing

    2013-01-01

    We present a framework, called TrayGen, to generate tray designs for the exhibition and packaging of a collection of objects. Based on principles from shape perception and visual merchandising, we abstract a number of design guidelines on how

  16. EPCGen2 Pseudorandom Number Generators: Analysis of J3Gen

    Alberto Peinado

    2014-04-01

    Full Text Available This paper analyzes the cryptographic security of J3Gen, a promising pseudo random number generator for low-cost passive Radio Frequency Identification (RFID tags. Although J3Gen has been shown to fulfill the randomness criteria set by the EPCglobal Gen2 standard and is intended for security applications, we describe here two cryptanalytic attacks that question its security claims: (i a probabilistic attack based on solving linear equation systems; and (ii a deterministic attack based on the decimation of the output sequence. Numerical results, supported by simulations, show that for the specific recommended values of the configurable parameters, a low number of intercepted output bits are enough to break J3Gen. We then make some recommendations that address these issues.

  17. PREFACE: Nano- and microfluidics Nano- and microfluidics

    Jacobs, Karin

    2011-05-01

    The field of nano- and microfluidics emerged at the end of the 1990s parallel to the demand for smaller and smaller containers and channels for chemical, biochemical and medical applications such as blood and DNS analysis [1], gene sequencing or proteomics [2, 3]. Since then, new journals and conferences have been launched and meanwhile, about two decades later, a variety of microfluidic applications are on the market. Briefly, 'the small flow becomes mainstream' [4]. Nevertheless, research in nano- and microfluidics is more than downsizing the spatial dimensions. For liquids on the nanoscale, surface and interface phenomena grow in importance and may even dominate the behavior in some systems. The studies collected in this special issue all concentrate on these type of systems and were part ot the priority programme SPP1164 'Nano- and Microfluidics' of the German Science Foundation (Deutsche Forschungsgemeinschaft, DFG). The priority programme was initiated in 2002 by Hendrik Kuhlmann and myself and was launched in 2004. Friction between a moving liquid and a solid wall may, for instance, play an important role so that the usual assumption of a no-slip boundary condition is no longer valid. Likewise, the dynamic deformations of soft objects like polymers, vesicles or capsules in flow arise from the subtle interplay between the (visco-)elasticity of the object and the viscous stresses in the surrounding fluid and, potentially, the presence of structures confining the flow like channels. Consequently, new theories were developed ( see articles in this issue by Münch and Wagner, Falk and Mecke, Bonthuis et al, Finken et al, Almenar and Rauscher, Straube) and experiments were set up to unambiguously demonstrate deviations from bulk, or 'macro', behavior (see articles in this issue by Wolff et al, Vinogradova and Belyaev, Hahn et al, Seemann et al, Grüner and Huber, Müller-Buschbaum et al, Gutsche et al, Braunmüller et al, Laube et al, Brücker, Nottebrock et al

  18. Introducing AstroGen: The Astronomy Genealogy Project

    Tenn, Joseph S.

    2016-01-01

    The Astronomy Genealogy Project ("AstroGen"), a project of the Historical Astronomy Division of the American Astronomical Society (AAS), will soon appear on the AAS website. Ultimately, it will list the world's astronomers with their highest degrees, theses for those who wrote them, academic advisors (supervisors), universities, and links to the astronomers or their obituaries, their theses when on-line, and more. At present the AstroGen team is working on those who earned doctorates with ast...

  19. Micro/Nano manufacturing

    Tosello, Guido

    2017-01-01

    Micro- and nano-scale manufacturing has been the subject of an increasing amount of interest and research effort worldwide in both academia and industry over the past 10 years.Traditional (MEMS) manufacturing, but also precision manufacturing technologies have been developed to cover micro......-scale dimensions and accuracies. Furthermore, these fundamentally different technology ecosystems are currently combined in order to exploit strengths of both platforms. One example is the use of lithography-based technologies to establish nanostructures that are subsequently transferred to 3D geometries via...

  20. Nano Manufacturing - Products and Technologies

    Hansen, Hans Nørgaard; Alting, Leo

    2004-01-01

    The use of micro and nano technologies in components and products not only sets new demands to the manufacturing technologies. Product concepts have to be rethought and redefined in order to implement the micro and nano technologies into functional systems. Both a technology driven and a product ...

  1. Parapedobacter koreensis gen. nov., sp. nov.

    Kim, Myung Kyum; Na, Ju-Ryun; Cho, Dong Ha; Soung, Nak-Kyun; Yang, Deok-Chun

    2007-06-01

    Strain Jip14(T), a Gram-negative, non-spore-forming, rod-shaped, non-motile bacterium, was isolated from dried rice straw and characterized in order to determine its taxonomic position. 16S rRNA gene sequence analysis revealed that strain Jip14(T) belongs to the family Sphingobacteriaceae, and the highest degree of sequence similarity was determined to be to Pedobacter saltans DSM 12145(T) (88.5 %), Pedobacter africanus DSM 12126(T) (87.6 %), Pedobacter heparinus DSM 2366(T) (87.1 %) and Pedobacter caeni LMG 22862(T) (86.9 %). Chemotaxonomic data revealed that strain Jip14(T) possesses menaquinone MK-7 and the predominant fatty acids C(15 : 0) iso, C(16 : 0), C(16 : 0) 10-methyl, C(17 : 0) iso 3-OH and summed feature 3 (C(15 : 0) iso 2-OH/C(16 : 1)omega7c). The results of physiological and biochemical tests clearly demonstrated that strain Jip14(T) represents a distinct species. Based on these data, Jip14(T) should be classified within a novel genus and species, for which the name Parapedobacter koreensis gen. nov., sp. nov. is proposed. The type strain of Parapedobacter koreensis is Jip14(T) (=KCTC 12643(T)=LMG 23493(T)).

  2. Banque Cantonale de Genève

    Banque Cantonale de Genève

    2011-01-01

    7e Salon Immobilier BCGE le samedi 3 septembre 2011, de 8 h 30 à 13 h 00, au Centre de formation de Conches À cette occasion, les meilleurs spécialistes professionnels genevois de l’immobilier seront réunis en un seul et même lieu. Si vous le souhaitez, un conseiller spécialisé dans les financements hypothécaires évaluera vos possibilités d’investissement immobilier adaptées à votre situation personnelle. En parallèle, les plus importantes régies immobilières de Genève seront à votre disposition pour vous présenter leurs offres actuelles, ainsi que les projets immobiliers futurs et discuter avec vous de la meilleure stratégie à adopter pour trouver l’objet de vos rêves. De plus, vous aurez la possibilité...

  3. GenHyPEM: an EC-supported STREP program on high pressure PEM water electrolysis

    Millet, P.

    2006-01-01

    GenHyPEM (generateur d'hydrogene PEM) is an international research project related to the electrolytic production of hydrogen from water, using proton exchange membrane (PEM) - based electrochemical generators. The specificity of this project is that all basic research efforts are devoted to the optimization of already existing electrolysers of industrial size, in order to facilitate the introduction of this technology in the industry and to propose technological solutions for the industrial and domestic production of electrolytic hydrogen. GenHyPEM is a three years long research program financially supported by the European Commission, gathering partners from academic institutions and from the industry, in order to reach three main technological objectives aimed at improving the performances of current 1000 Nliter/hour H 2 industrial PEM water electrolysers: (i) Development of alternative low-cost membrane electrode assemblies and stack components with electrochemical performances similar to those of state-of-the-art systems. The objectives are the development of nano-scaled electrocatalytic structures for reducing the amount of noble metals; the synthesis and characterization of non-noble metal catalytic compounds provided by molecular chemistry and bio-mimetic approaches; the preparation of new composite membrane materials for high current density, high pressure and high temperature operation; the development and optimization of low-cost porous titanium sheets acting as current collectors in the electrolysis stack; (ii) Development of an optimized stack structure for high current density (1 A.cm-2) and high pressure (50 bars) operation for direct pressurized storage; (iii) Development of an automated and integrated electrolysis unit allowing gas production from intermittent renewable sources of energy such as photovoltaic-solar and wind. Current status of the project as well as perspectives are described in this paper. This project, coordinated by University of

  4. EDITORIAL: Nano Meets Spectroscopy Nano Meets Spectroscopy

    Birch, David J. S.

    2012-08-01

    The multidisciplinary two-day Nano Meets Spectroscopy (NMS) event was held at the National Physical Laboratory (NPL), Teddington, UK, in September 2011. The event was planned from the outset to be at the interface of several areas—in particular, spectroscopy and nanoscience, and to bring together topics and people with different approaches to achieving common goals in biomolecular science. Hence the meeting cut across traditional boundaries and brought together researchers using diverse techniques, particularly fluorescence and Raman spectroscopy. Despite engaging common problems, these techniques are frequently seen as mutually exclusive with the two communities rarely interacting at conferences. The meeting was widely seen to have lived up to its billing in good measure. It attracted the maximum capacity of ~120 participants, including 22 distinguished speakers (9 from outside the UK), over 50 posters and a vibrant corporate exhibition comprising 10 leading instrument companies and IOP Publishing. The organizers were Professor David Birch (Chair), Dr Karen Faulds and Professor Duncan Graham of the University of Strathclyde, Professor Cait MacPhee of the University of Edinburgh and Dr Alex Knight of NPL. The event was sponsored by the European Science Foundation, the Institute of Physics, the Royal Society of Chemistry, NPL and the Scottish Universities Physics Alliance. The full programme and abstracts are available at http://sensor.phys.strath.ac.uk/nms/program.php. The programme was quite ambitious in terms of the breadth and depth of scope. The interdisciplinary and synergistic concept of 'X meets Y' played well, cross-fertilization between different fields often being a source of inspiration and progress. Fluorescence and Raman spectroscopy provided the core, but the meeting had little repetition and also attracted contributions on more specialist techniques such as CARS, super-resolution, single molecule and chiral methods. In terms of application the

  5. Nano-ceramics and its molding technologies

    Liu Jian; Xu Yunshu

    2007-01-01

    Nano-ceramics and its related knowledge were introduced. Fabrication of nano-ceramic powder, as well as the molding and sintering technologies of nano-ceramics were reviewed. Features of the present molding technologies were analyzed. The applications of nano-ceramics were prospected. (authors)

  6. Frontiers in nano-therapeutics

    Tasnim, Nishat; Sai Krishna, Katla; Kalagara, Sudhakar; Narayan, Mahesh; Noveron, Juan C; Joddar, Binata

    2017-01-01

    This brief highlights recent research advances in the area of nano-therapeutics. Nanotechnology holds immense potential for application in a wide range of biological and engineering applications such as molecular sensors for disease diagnosis, therapeutic agents for the treatment of diseases, a vehicle for delivering therapeutics and imaging agents for theranostic applications, both in-vitro and in-vivo. The brief is grouped into the following sections namely, A) Discrete Nanosystems ; B) Anisotropic Nanoparticles; C) Nano-films/coated/layered and D) Nano-composites.

  7. HNF - Helmholtz Nano Facility

    Wolfgang Albrecht

    2017-05-01

    Full Text Available The Helmholtz Nano Facility (HNF is a state-of-the-art cleanroom facility. The cleanroom has ~1100 m2 with cleanroom classes of DIN ISO 1-3. HNF operates according to VDI DIN 2083, Good Manufacturing Practice (GMP and aquivalent to Semiconductor Industry Association (SIA standards. HNF is a user facility of Forschungszentrum Jülich and comprises a network of facilities, processes and systems for research, production and characterization of micro- and nanostructures. HNF meets the basic supply of micro- and nanostructures for nanoelectronics, fluidics. micromechanics, biology, neutron and energy science, etc.. The task of HNF is rapid progress in nanostructures and their technology, offering efficient access to infrastructure and equipment. HNF gives access to expertise and provides resources in production, synthesis, characterization and integration of structures, devices and circuits. HNF covers the range from basic research to application oriented research facilitating a broad variety of different materials and different sample sizes.

  8. Nano-optomechanical transducer

    Rakich, Peter T; El-Kady, Ihab F; Olsson, Roy H; Su, Mehmet Fatih; Reinke, Charles; Camacho, Ryan; Wang, Zheng; Davids, Paul

    2013-12-03

    A nano-optomechanical transducer provides ultrabroadband coherent optomechanical transduction based on Mach-wave emission that uses enhanced photon-phonon coupling efficiencies by low impedance effective phononic medium, both electrostriction and radiation pressure to boost and tailor optomechanical forces, and highly dispersive electromagnetic modes that amplify both electrostriction and radiation pressure. The optomechanical transducer provides a large operating bandwidth and high efficiency while simultaneously having a small size and minimal power consumption, enabling a host of transformative phonon and signal processing capabilities. These capabilities include optomechanical transduction via pulsed phonon emission and up-conversion, broadband stimulated phonon emission and amplification, picosecond pulsed phonon lasers, broadband phononic modulators, and ultrahigh bandwidth true time delay and signal processing technologies.

  9. Carbon nanotubes: from nano test tube to nano-reactor.

    Khlobystov, Andrei N

    2011-12-27

    Confinement of molecules and atoms inside carbon nanotubes provides a powerful strategy for studying structures and chemical properties of individual molecules at the nanoscale. In this issue of ACS Nano, Allen et al. explore the nanotube as a template leading to the formation of unusual supramolecular and covalent structures. The potential of carbon nanotubes as reactors for synthesis on the nano- and macroscales is discussed in light of recent studies.

  10. ANALISIS GEN HAEMAGGLUTININ PADA VIRUS CAMPAK LIAR

    Subangkit Subangkit

    2015-05-01

    Full Text Available AbstrakPenyakit Campak disebabkan oleh virus campak yang termasuk genus Morbilivirus dan Family Paramyxoviridae. Penyakit campak masih menjadi masalah kesehatan karena masih ditemukan Kejadian Luar Biasa (KLB di Indonesia. Salah satu penyebab terjadinya KLB tersebut diduga sebagaiakibat perbedaan antigenesitas antara strain vaksin yang digunakan dengan strain virus campak liar yang beredar di Indonesia. Penelitian ini bertujuan mendapatkan gambaran tentang karakteristik genetik gen Haemagglutinin virus campak liar yang ada di Indonesia. Spesimen yang digunakan sebanyak 27 isolat virus penyebab KLB dari 17 propinsi selama periode tahun 2003-2010. Isolat virus dilakukan pemeriksaan secara RT-PCR dan sekuensing dengan metode Sanger. Hasil sekuensing dianalisis dengan menggunakan perangkat lunak Bioedit 7.0 dan MEGA 4.0. Hasil penelitian didapatkan perbedaan 10 asam amino antara virus campak strain vaksin CAM-70 dan virus campak liar pada posisi D416N; K424T; V451M; N455T; V466I; I473T; F476L; Y481S atau Y481N; H495N; G505D. Kesimpulan penelitian ini adalah terdapat perbedaan karakteristik genetik antara virus campak liar di Indonesia berbeda dengan strain virus vaksin CAM-70.Kata kunci : Campak, Analisis Molekuler, Hemagglutinin, CD46AbstractMeasles is caused by virus belonging to the genus Morbilivirus and Family Paramyxoviridae. Measles is still a public health problem because outbreak of measles still found in Indonesia. Outbreak is suspected as a result of differences in antigenicity between vaccine strains used with wild-type measles virus strains circulating in Indonesia. This study aims to get genetic characteristics of wild-type measles virus haemagglutinin gene in Indonesia. The specimens were used 27 viral isolates from 17 provinces period 2003-2010. Viral isolates examined by RT-PCR and sequencing with Sanger method. Sequencing analysis were conducted using Bioedit 7.0 and MEGA 4.0 software. The results showed 10 amino acid differences

  11. Nano Engineered Energetic Materials (NEEM)

    2011-01-12

    Dryer, FL; Aksay, IA, Functionalized Graphene Sheet Colloids for Enhanced Fuel/Propellant Combustion, ACS NANO 3, 13, 3945-3954, 2009. 16. Weismiller...loading) which was not observed in other heterogeneous mixtures. Additional details on nano fuels (including graphene ) with liquid oxidizers can be...to the high reflectance of some samples black high temperature spray paint was used on ends of the samples to decrease ignition delay times and

  12. Genética e hanseníase

    Bernardo Beiguelman

    Full Text Available As diferentes linhas de pesquisa utilizadas para investigar a importância dos fatores hereditários humanos na determinação da resistência/suscetibilidade à infecção pelo Mycobacterium leprae foram discutidas no presente trabalho. Uma síntese dessas abordagens permitiu analisar os resultados das investigações sobre associação da hanseníase com polimorfismos genéticos, distribuição familial da hanseníase, prevalência da hanseníase e distância genética, concordância da hanseníase em gêmeos e estudos genéticos sobre a reação de Mitsuda.

  13. Chemical Functionalization, Self-Assembly, and Applications of Nano materials and Nano composites 2014

    Yan, X.; Jiao, T.; Balan, L.; Chen, X.; Hu, M.Z.; Liu, W.

    2014-01-01

    The growing interests in nano materials and nano composites call for the development of processing techniques to obtain multiple functionalization nano structures and achieve the tailoring of specific features of the nanometer size. Functional nano materials and nano composites will expand the applied range of the original material and at the same time promote the development of inter discipline. Thus, the chemical functionalization and bottom-up assemblies of nano materials and subsequent applications will accelerate the development of nano science and nano technology.

  14. Electrochemically synthesized Si nano wire arrays and thermoelectric nano structures

    Khuan, N.I.; Ying, K.K.; Nur Ubaidah Saidin; Foo, C.T.

    2012-01-01

    Thermoelectric nano structures hold great promise for capturing and directly converting into electricity some vast amount of low-grade waste heats now being lost to the environment (for example from nuclear power plant, fossil fuel burning, automotive and household appliances). In this study, large-area vertically-aligned silicon nano wire (SiNW) arrays were synthesized in an aqueous solution containing AgNO 3 and HF on p-type Si (100) substrate by self-selective electroless etching process. The etching conditions were systematically varied in order to achieve different stages of nano wire formation. Diameters of the SiNWs obtained varied from approximately 50 to 200 nm and their lengths ranged from several to a few tens of μm. Te/ Bi 2 Te 3 -Si thermoelectric core-shell nano structures were subsequently obtained via galvanic displacement of SiNWs in acidic HF electrolytes containing HTeO 2 + and Bi 3+ / HTeO 2 + ions. The reactions were basically a nano-electrochemical process due to the difference in redox potentials between the materials. the surface-modified SiNWs of core-shell structures had roughened surface morphologies and therefore, higher surface-t-bulk ratios compared to unmodified SiNWs. They have potential applications in sensors, photovoltaic and thermoelectric nano devices. Growth study on the SiNWs and core-shell nano structures produced is presented using various microscopy, diffraction and probe-based techniques for microstructural, morphological and chemical characterizations. (Author)

  15. Craniostenose em gêmeos: estudo genético

    Walter Carlos Pereira

    1968-09-01

    Full Text Available É relatada a ocorrência de formas clínicas diversas de craniostenose em gêmeos de sexo diferente. A menina apresentava obliteração completa da sutura coronaria e dos dois terços anteriores da sutura sagital; no menino a sutura sagital era a única afetada. O estudo genético mostrou que a craniostenose independe de aberrações cromossômicas, indicando ser transmitida por gens recessivos raros de natureza autossômica.

  16. Introducing AstroGen: the Astronomy Genealogy Project

    Tenn, Joseph S.

    2016-12-01

    The Astronomy Genealogy Project (AstroGen), a project of the Historical Astronomy Division of the American Astronomical Society (AAS), will soon appear on the AAS website. Ultimately, it will list the world's astronomers with their highest degrees, theses for those who wrote them, academic advisors (supervisors), universities, and links to the astronomers or their obituaries, their theses when online, and more. At present the AstroGen team is working on those who earned doctorates with astronomy-related theses. We show what can be learned already, with just ten countries essentially completed.

  17. Improvement of Steam Generator Reliability for GEN-IV SFR

    Kim, Seong O; Kim Se Yun; Kim, Seok Hoon; Eoh, Jae Hyuk; Lee, Hyeong Yeon; Choi, Byung Seon

    2005-11-15

    The R and D items performed in this study were selected from the R and D task of ' Reliability improvement of Steam Generator' of GEN-IV SFR Component Design and BOP. Since this project deals with one of the most important issues for a GEN-IV SFR system, it needs to enhance the domestic technical backgrounds associated with the corresponding R and D items even for a very short period by 2005. This study provides the R and D results for i) Development of assessment methodology for dissimilar metal weld and ii) Development of multi-dimensional simulation methodology for a SWR event in a SFR steam generator.

  18. Improvement of Steam Generator Reliability for GEN-IV SFR

    Kim, Seong O; Kim Se Yun; Kim, Seok Hoon; Eoh, Jae Hyuk; Lee, Hyeong Yeon; Choi, Byung Seon

    2005-11-01

    The R and D items performed in this study were selected from the R and D task of ' Reliability improvement of Steam Generator' of GEN-IV SFR Component Design and BOP. Since this project deals with one of the most important issues for a GEN-IV SFR system, it needs to enhance the domestic technical backgrounds associated with the corresponding R and D items even for a very short period by 2005. This study provides the R and D results for i) Development of assessment methodology for dissimilar metal weld and ii) Development of multi-dimensional simulation methodology for a SWR event in a SFR steam generator

  19. La genética de las poblaciones centroamericanas

    Barrantes, Ramiro

    2005-01-01

    Las poblaciones centroamericanas no han sido objeto de muchos estudios genéticos con la excepción de análisis esporádicos de la variación entre y dentro de los grupos amerindios y de origen africano ubicados en el área. No obstante, en los últimos 15 años se efectuaron investigaciones sistemáticas en este sentido incluyendo poblaciones mestizas, particularmente las de Costa Rica y Panamá. En los amerindios se efectuaron estudios detallados de su estructura genética y las relaciones filogenéti...

  20. Genes and proteins of Escherichia coli (GenProtEc).

    Riley, M; Space, D B

    1996-01-01

    GenProtEc is a database of Escherichia coli genes and their gene products, classified by type of function and physiological role and with citations to the literature for each. Also present are data on sequence similarities among E.coli proteins with PAM values, percent identity of amino acids, length of alignment and percent aligned. The database is available as a PKZip file by ftp from mbl.edu/pub/ecoli.exe. The program runs under MS-DOS on IMB-compatible machines. GenProtEc can also be accessed through the World Wide Web at URL http://mbl.edu/html/ecoli.html.

  1. ASN’s actions in GEN IV reactors and Sodium Fast Reactors (SFR)

    Belot, Clotilde

    2013-01-01

    The ASN is involved in 3 actions concerning GEN IV: • Overview of nuclear reactor GEN IV systems; • Specific analysis about transmutation; • Prototype reactor ASTRID (SFR). Furthermore theses actions are in the beginning (no conclusions or results available)

  2. A Virtual Reality Framework to Optimize Design, Operation and Refueling of GEN-IV Reactors

    Rizwan-uddin; Nick Karancevic; Stefano Markidis; Joel Dixon; Cheng Luo; Jared Reynolds

    2008-01-01

    Many GEN-IV candidate designs are currently under investigation. Technical issues related to material, safety and economics are being addressed at research laboratories, industry and in academia. After safety, economic feasibility is likely to be the most important criterion in the success of GEN-IV design(s). Lessons learned from the designers and operators of GEN-II (and GEN-III) reactors must play a vital role in achieving both safety and economic feasibility goals

  3. A Virtual Reality Framework to Optimize Design, Operation and Refueling of GEN-IV Reactors.

    Rizwan-uddin; Nick Karancevic; Stefano Markidis; Joel Dixon; Cheng Luo; Jared Reynolds

    2008-04-23

    many GEN-IV candidate designs are currently under investigation. Technical issues related to material, safety and economics are being addressed at research laboratories, industry and in academia. After safety, economic feasibility is likely to be the most important crterion in the success of GEN-IV design(s). Lessons learned from the designers and operators of GEN-II (and GEN-III) reactors must play a vital role in achieving both safety and economic feasibility goals.

  4. Analisis Mutasi Gen Protein X Virus Hbv Pada Penderita Hepatitis B Akut Di Manado

    Fatimawali; Kepel, Billy

    2014-01-01

    Faktor-faktor yang mempengaruhi perkembangan hepatitis B kronis menjadi kanker hati antara lain mutasi pada gen x. Penelitian ini bertujuan untuk mengidentifikasi gen protein x virus HBV dan menganalisis apakah terjadi mutasi gen yang terkait dengan munculnya tumor ganas sirosis hati (HCC). Penelitian ini menggunakan primer untuk proses nested PCR yang telah dirancang sebelumnya. Proses nested PCR terhadap 10 sampel DNA HBV pasien dilakukan untuk mengamplifikasi fragmen DNA gen x dilanjutkan ...

  5. Epidemiologia genética: epidemiologia, genética ou nenhuma das anteriores?

    Aguinaldo Gonçalves

    1990-12-01

    Full Text Available No esforço de contribuir para melhor entendimento da identidade da Epidemiologia Genética, são revistas sua concepção, campo de atuação, métodos e técnicas pertinentes e algumas instâncias de aplicação. Entendendo-a como a área de interesse dos fatores genéticos das doenças e suas interações ambientais, apresenta-se seu campo de atuação como constituído por dois segmentos: um descritivo, que lida com conhecimento da distribuição de tais afecções em famílias e populações, seu impacto a nível do coletivo e sua vigilância epidemiológica, bem como o estudo de seus determinantes; o segundo, caracterizado pela intervenção, refere-se às respectivas medidas preventivas. Em que pese possível limitação pela não-consideração de todas as situações existentes, particular atenção é destinada à revisão de métodos e técnicas que possam ser convergentemente aplicados, a partir de procedimentos genéticos e epidemiológicos. Entre eles, destacam-se como estudos de casos tanto metodologias laboratoriais (como os dermatóglifos quanto quantitativos, como cálculo de herdabilidade e análise multivariada. Alguns objetos de estudo são tomados como instância de aplicação, por contarem com investigações específicas em nosso meio: a hanseníase, o hidrargirismo e a esquizofrenia.In an attempt to contribute to a better undestanding of the identity of Genetic Epidemiology, we review its conception, its field of influence, its appropriate methods and techniques and, at last, some of its applications. Genetic Epidemiology involves the study of genetic factors acting on diseases and on their environmental interactions. These includes two major areas: a descriptive one, related to the distribution of such conditions in families and populations, to the epidemiologic surveillance and to the study of determinants; and another characterized by intervention, which is related to preventive measures. Because of the dificulty in

  6. Functional Nano fibers: Production and Applications

    Khatri, Z.; Kim, I.S.; Kim, S.H.

    2016-01-01

    Nano fibers are lighter material with higher surface area in comparison to polymeric film. The ease of producing functional nano fiber is another advantage over many nano materials. Functional nano fiber in particular has attained a greater interest in recent years. The applications of functional nano fibers are increasing in various technical fields such as water filter membranes, tissue engineering, biosensors, drug delivery systems, wound dressings, catalysis, antibacterial. This special issue is comprised of well-selective articles that discuss production of functional nano fibers their applications in different emerging fields. M. Zhang et al. have presented exciting work on drug delivery using nano fibers. They used collagen that was extracted from abandoned Rana chensinensis skin in northeastern China via an acid enzymatic extraction method. They demonstrated two different nano fiber-vancomycin (VCM) systems, that is, VCM blended nano fibers and core-shell nano fibers with VCM in the core, and both systems sustained control release for a period of 80 hours. Another work was presented by R. Takai et al. on blood purification using composite nano fibers. About 10% of the population worldwide is affected by chronic kidney disease (CKD). The authors developed nano fiber meshes zeolite-polymer composite nano fibers for efficient adsorption of creatinine, which is a simpler and more accessible method for hemodialysis (HD) patients.

  7. Revision of Corallinaceae (Corallinales, Rhodophyta): recognizing Dawsoniolithon gen. nov., Parvicellularium gen. nov. and Chamberlainoideae subfam. nov. containing Chamberlainium gen. nov. and Pneophyllum.

    Caragnano, Annalisa; Foetisch, Alexandra; Maneveldt, Gavin W; Millet, Laurent; Liu, Li-Chia; Lin, Showe-Mei; Rodondi, Graziella; Payri, Claude E

    2018-03-25

    A multi-gene (SSU, LSU, psbA and COI) molecular phylogeny of the family Corallinaceae (excluding the subfamilies Lithophylloideae and Corallinoideae) showed a paraphyletic grouping of six monophyletic clades. Pneophyllum and Spongites were reassessed and recircumscribed using DNA sequence data integrated with morpho-anatomical comparisons of type material and recently collected specimens. We propose Chamberlainoideae subfam. nov., including the type genus Chamberlainium gen. nov., with C. tumidum comb. nov. as the generitype, and Pneophyllum. Chamberlainium is established to include several taxa previously ascribed to Spongites, the generitype of which currently resides in Neogoniolithoideae. Additionally we propose two new genera, Dawsoniolithon gen. nov. (Metagoniolithoideae), with D. conicum comb. nov. as the generitype and Parvicellularium gen. nov. (subfamily incertae sedis), with P. leonardi sp. nov. as the generitype. Chamberlainoideae has no diagnostic morpho-anatomical features that enable one to assign specimens to it without DNA sequence data, and it is the first subfamily to possess both Type 1 (Chamberlainium) and Type 2 (Pneophyllum) tetra/bisporangial conceptacle roof development. Two characters distinguish Chamberlainium from Spongites: tetra/biasporangial conceptacle chamber diameter (300 μm in Spongites) and tetra/bisporangial conceptacle roof thickness (8 cells in Spongites). Two characters also distinguish Pneophyllum from Dawsoniolithon: tetra/bisporangial conceptacle roof thickness (8 cells in Dawsoniolithon) and thallus construction (dimerous in Pneophyllum vs. monomerous in Dawsoniolithon). This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  8. A Novel Role of Human Holliday Junction Resolvase GEN1 in the Maintenance of Centrosome Integrity

    Gao, M.; Danielsen, Jannie Michaela Rendtlew; Wei, L.-Z.

    2012-01-01

    but not catalytic activity of GEN1 is required for preventing centrosome hyper-amplification, formation of multiple mitotic spindles, and multi-nucleation. Our findings provide novel insight into the biological functions of GEN1 by uncovering an important role of GEN1 in the regulation of centrosome integrity....

  9. Optimal trading strategy for GenCo in LMP-based and bilateral ...

    cboonchu

    GenCo) ... In Li and Shahidehpour (2005), a game-based bidding strategy for GenCos with ..... With the different demands, dispatched levels of GenCos vary as shown in Table 6. .... optimisation, AI applications to power systems, and power system ...

  10. Nano dots and nano crystals detectors applications and questions

    Paltiel, Y.; Shusterman, S.; Naaman, R.; Aqua, T.; Banin, U.; Aharoni, A.

    2006-01-01

    Full Text: Nano technology is in the center of attention in the last decade. In our work we are using nano dots, nano crystals and quantum wells to study and fabricate infrared devices. In this study we aim to develop an accurate narrow band infrared sensor that will use quantum mechanics at room temperature. The sensor is based on a FET like structure, in which the current is very sensitive to potential changes on its surface. We have shown that this configuration provides flexibility and variability in operation bandgap and response. However, the relations between the quantum and the macroscopic world are not trivial and the coupling between worlds influences the transport, noise, and optical measurements. In this talk we will show some of the infrared devices we are studying, and try to present the rich physics and relations that combine between the two worlds

  11. GenBank blastn search result: AK064582 [KOME

    Full Text Available AK064582 002-112-F03 AY007820.1 Daucus carota ATPase8 (ATP8) gene, ATP8-Sp1b allele, complete cds; chimeric... ATPase9 (ATP9) gene, ATP9-Sp3 allele, complete cds; and chimeric ATPase6 (ATP6) gen

  12. Safer Systems: A NextGen Aviation Safety Strategic Goal

    Darr, Stephen T.; Ricks, Wendell R.; Lemos, Katherine A.

    2008-01-01

    The Joint Planning and Development Office (JPDO), is charged by Congress with developing the concepts and plans for the Next Generation Air Transportation System (NextGen). The National Aviation Safety Strategic Plan (NASSP), developed by the Safety Working Group of the JPDO, focuses on establishing the goals, objectives, and strategies needed to realize the safety objectives of the NextGen Integrated Plan. The three goal areas of the NASSP are Safer Practices, Safer Systems, and Safer Worldwide. Safer Practices emphasizes an integrated, systematic approach to safety risk management through implementation of formalized Safety Management Systems (SMS) that incorporate safety data analysis processes, and the enhancement of methods for ensuring safety is an inherent characteristic of NextGen. Safer Systems emphasizes implementation of safety-enhancing technologies, which will improve safety for human-centered interfaces and enhance the safety of airborne and ground-based systems. Safer Worldwide encourages coordinating the adoption of the safer practices and safer systems technologies, policies and procedures worldwide, such that the maximum level of safety is achieved across air transportation system boundaries. This paper introduces the NASSP and its development, and focuses on the Safer Systems elements of the NASSP, which incorporates three objectives for NextGen systems: 1) provide risk reducing system interfaces, 2) provide safety enhancements for airborne systems, and 3) provide safety enhancements for ground-based systems. The goal of this paper is to expose avionics and air traffic management system developers to NASSP objectives and Safer Systems strategies.

  13. An electronic flight bag for NextGen avionics

    Zelazo, D. Eyton

    2012-06-01

    The introduction of the Next Generation Air Transportation System (NextGen) initiative by the Federal Aviation Administration (FAA) will impose new requirements for cockpit avionics. A similar program is also taking place in Europe by the European Organisation for the Safety of Air Navigation (Eurocontrol) called the Single European Sky Air Traffic Management Research (SESAR) initiative. NextGen will require aircraft to utilize Automatic Dependent Surveillance-Broadcast (ADS-B) in/out technology, requiring substantial changes to existing cockpit display systems. There are two ways that aircraft operators can upgrade their aircraft in order to utilize ADS-B technology. The first is to replace existing primary flight displays with new displays that are ADS-B compatible. The second, less costly approach is to install an advanced Class 3 Electronic Flight Bag (EFB) system. The installation of Class 3 EFBs in the cockpit will allow aircraft operators to utilize ADS-B technology in a lesser amount of time with a decreased cost of implementation and will provide additional benefits to the operator. This paper describes a Class 3 EFB, the NexisTM Flight-Intelligence System, which has been designed to allow users a direct interface with NextGen avionics sensors while additionally providing the pilot with all the necessary information to meet NextGen requirements.

  14. Justicia y genética: compensando las diferencias

    Alejandra Zúñiga-Fajuri

    2013-01-01

    Full Text Available Se analizan los dilemas morales asociados a los avances científicos que en la actualidad nos exigen repensar el concepto de igualdad equitativa de oportunidades. Asimismo, se pasa revista a la discusión filosófica en torno al origen de las desventajas sociales y genéticas que permiten las desigualdades sociales.

  15. Distributed Generation Market Demand Model (dGen): Documentation

    Sigrin, Benjamin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gleason, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Preus, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States); Baring-Gould, Ian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-02-01

    The Distributed Generation Market Demand model (dGen) is a geospatially rich, bottom-up, market-penetration model that simulates the potential adoption of distributed energy resources (DERs) for residential, commercial, and industrial entities in the continental United States through 2050. The National Renewable Energy Laboratory (NREL) developed dGen to analyze the key factors that will affect future market demand for distributed solar, wind, storage, and other DER technologies in the United States. The new model builds off, extends, and replaces NREL's SolarDS model (Denholm et al. 2009a), which simulates the market penetration of distributed PV only. Unlike the SolarDS model, dGen can model various DER technologies under one platform--it currently can simulate the adoption of distributed solar (the dSolar module) and distributed wind (the dWind module) and link with the ReEDS capacity expansion model (Appendix C). The underlying algorithms and datasets in dGen, which improve the representation of customer decision making as well as the spatial resolution of analyses (Figure ES-1), also are improvements over SolarDS.

  16. Meet Mr. and Mrs. Gen X: A New Parent Generation

    Howe, Neil

    2010-01-01

    Slowly but surely, Generation Xers have been taking over from Baby Boomers as the majority of parents in elementary and secondary education. In the early 1990s, Gen Xers began joining parent-teacher associations in the nation's elementary schools. Around 2005, they became the majority of middle school parents. By the fall of 2008, they took over…

  17. PowerGen plc report and accounts 1994

    1994-01-01

    The annual report and accounts of PowerGen plc for the year 1994 are presented. Financial highlights are quoted, followed by the Chairman's statement, reviews by the Chief Executive and Financial Directors, reports by the Auditors and Directors, balance sheets and details of the consolidated profit and loss account and principal accounting policies. A four year summary and shareholder information are included. (UK)

  18. Measuring Gen-Y Customer Experience in the Banking Sector

    Kyguolienė Asta

    2017-12-01

    Full Text Available The article analyses customer experience as the subject of marketing research and presents methods for assessing customer experience. The results of empirical research revealing the Gen-Y customer experience in using the Lithuanian commercial banks’ services are presented.

  19. A New Parent Generation: Meet Mr. and Mrs. Gen X

    Howe, Neil

    2010-01-01

    Slowly but surely, Generation Xers have been taking over from Baby Boomers as the majority of parents in elementary and secondary education. Gen-X parents and Boomer parents belong to two neighboring generations, each possessing its own location in history and its own peer personality. They are similar in some respects, but clearly different in…

  20. GenSVM: a generalized multiclass support vector machine

    G.J.J. van den Burg (Gertjan); P.J.F. Groenen (Patrick)

    2016-01-01

    textabstractTraditional extensions of the binary support vector machine (SVM) to multiclass problems are either heuristics or require solving a large dual optimization problem. Here, a generalized multiclass SVM is proposed called GenSVM. In this method classification boundaries for a K-class

  1. Metrology at the nano scale

    Sheridan, B.; Cumpson, P.; Bailey, M.

    2006-01-01

    Progress in nano technology relies on ever more accurate measurements of quantities such as distance, force and current industry has long depended on accurate measurement. In the 19th century, for example, the performance of steam engines was seriously limited by inaccurately made components, a situation that was transformed by Henry Maudsley's screw micrometer calliper. And early in the 20th century, the development of telegraphy relied on improved standards of electrical resistance. Before this, each country had its own standards and cross border communication was difficult. The same is true today of nano technology if it is to be fully exploited by industry. Principles of measurement that work well at the macroscopic level often become completely unworkable at the nano metre scale - about 100 nm and below. Imaging, for example, is not possible on this scale using optical microscopes, and it is virtually impossible to weigh a nano metre-scale object with any accuracy. In addition to needing more accurate measurements, nano technology also often requires a greater variety of measurements than conventional technology. For example, standard techniques used to make microchips generally need accurate length measurements, but the manufacture of electronics at the molecular scale requires magnetic, electrical, mechanical and chemical measurements as well. (U.K.)

  2. Nano structures for Medical Diagnostics Md

    Bellah, M.; Iqbal, S.M.; Bellah, M.; Iqbal, S.M.; Christensen, S.M.; Iqbal, S.M.; Iqbal, S.M.

    2012-01-01

    Nano technology is the art of manipulating materials on atomic or molecular scales especially to build nano scale structures and devices. The field is expanding quickly, and a lot of work is ongoing in the design, characterization, synthesis, and application of materials, structures, devices, and systems by controlling shape and size at nanometer scale. In the last few years, much work has been focused on the use of nano structures toward problems of biology and medicine. In this paper, we focus on the application of various nano structures and nano devices in clinical diagnostics and detection of important biological molecules. The discussion starts by introducing some basic techniques of micro-/nano scale fabrication that have enabled reproducible production of nano structures. The prospects, benefits, and limitations of using these novel techniques in the fields of bio detection and medical diagnostics are then discussed. Finally, the challenges of mass production and acceptance of nano technology by the medical community are considered.

  3. Green chemistry by nano-catalysis

    Polshettiwar, Vivek; Varma, Rajender S.

    2010-01-01

    the homogeneous catalysts. This review focuses on the use of nano-catalysis for green chemistry development including the strategy of using microwave heating with nano-catalysis in benign aqueous reaction media which offers an extraordinary synergistic effect

  4. Pemotongan dan Menyambung DNA dalam Kloning Gen, Studi pada Kloning Gen Prolidase dari Bakteri Asam Laktat

    Ketut Suriasih

    2015-03-01

    Full Text Available Gene cloning in lactic acid bacteria (LAB is crucial in term to increase their ability to hydrolyze milk protein such as proline. This proline could be hydrolyzed when the LAB undergone cloning on their genome coding the enzyme. The cloning process need technology to separate/isolate the gene capable of proline hydrolyze. Isolation of DNA containing prolidase gene, need DNA genome cutting. After isolation of DNA gene coding prolidase, it is then recombined with other bacterial DNA to obtained recombinant gene. The process need ligase. In gene cloning, knowledge of cutting and joining the DNA should be understood. The enzyme take the role in cutting and joining the DNA were restriction endonuclease and ligase. The restriction enzyme function (1 in inserting a gen into plasmid contained in a vector during gene cloning, and gene expression experiment, and (2 to identify the gene. It is important that the researcher already have standardized  sequenced gene as control. The DNA contained target gene was cut using some restriction enzyme, then the gene was arrayed in electrophoresis gel using southern blot technique. DNA sequence was elucidated by addition of ethydium bromide. To identify/characterize the isolated gene, this DNA sequence was encountered the control DNA.

  5. Dimensional micro and nano metrology

    Hansen, Hans Nørgaard; da Costa Carneiro, Kim; Haitjema, Han

    2006-01-01

    The need for dimensional micro and nano metrology is evident, and as critical dimensions are scaled down and geometrical complexity of objects is increased, the available technologies appear not sufficient. Major research and development efforts have to be undertaken in order to answer these chal......The need for dimensional micro and nano metrology is evident, and as critical dimensions are scaled down and geometrical complexity of objects is increased, the available technologies appear not sufficient. Major research and development efforts have to be undertaken in order to answer...... these challenges. The developments have to include new measuring principles and instrumentation, tolerancing rules and procedures as well as traceability and calibration. The current paper describes issues and challenges in dimensional micro and nano metrology by reviewing typical measurement tasks and available...

  6. Nano market and analysis of technology

    2001-10-01

    This book gives descriptions of summary of nano technology with meaning, character and field, trend of technical development in domestic, current condition of nano basic research in domestic, trend of technical development in foreign country such as summary, trend of technology by industrial field, machine and metronics, material and process, standard of nano mechanism, scale of market and trend, competitiveness of nano technology of major country and research development system in Japan, Korean company and major countries.

  7. Fundamental Issues of Nano-fluid Behavior

    Williams, Wesley C.

    2006-01-01

    This paper will elucidate some of the behaviors of nano-fluids other than the abnormal conductivity enhancement, which are of importance to the experimental and engineering use of nano-fluids. Nano-fluid is the common name of any sol colloid involving nano-scale (less than 100 nm) sized particles dispersed within a base fluid. It has been shown previously that the dispersion of nano-particulate metallic oxides into water can increase thermal conductivity up to 30-40% over that of the base fluid and anomalously more than the mere weighed average of the colloid. There is a great potential for the use of nano-fluids as a way to enhance fluid/thermal energy transfer systems. Due to the recentness of nano-fluid science, there are still many issues which have not been fully investigated. This paper should act as a primer for the basic understanding of nano-fluid behavior. Particle size and colloid stability are of key importance to the functionality of nano-fluids. The pH and concentration/loading of nano-fluids can alter the size of the nano-particles and also the stability of the fluids. It will be shown through experiment and colloid theory the importance of these parameters. Furthermore, most of the existing literature uses volume percentage as the measure of particle loading, which can often be misleading. There will be discussion of this and other misleading ideas in nano-fluid science. (author)

  8. Single Molecule Nano-Metronome

    Buranachai, Chittanon; McKinney, Sean A.; Ha, Taekjip

    2006-01-01

    We constructed a DNA-based nano-mechanical device called the nano-metronome. Our device is made by introducing complementary single stranded overhangs at the two arms of the DNA four-way junction. The ticking rates of this stochastic metronome depend on ion concentrations and can be changed by a set of DNA-based switches to deactivate/reactivate the sticky end. Since the device displays clearly distinguishable responses even with a single basepair difference, it may lead to a single molecule ...

  9. Single Molecule Nano-Metronome

    Buranachai, Chittanon; McKinney, Sean A.; Ha, Taekjip

    2008-01-01

    We constructed a DNA-based nano-mechanical device called the nano-metronome. Our device is made by introducing complementary single stranded overhangs at the two arms of the DNA four-way junction. The ticking rates of this stochastic metronome depend on ion concentrations and can be changed by a set of DNA-based switches to deactivate/reactivate the sticky end. Since the device displays clearly distinguishable responses even with a single basepair difference, it may lead to a single molecule sensor of minute sequence differences of a target DNA. PMID:16522050

  10. Nano-pyramid arrays for nano-particle trapping

    Sun, Xingwu; Veltkamp, Henk-Willem; Berenschot, Johan W.; Gardeniers, Johannes G.E.; Tas, Niels Roelof

    2016-01-01

    Abstract In this paper we present the drastic miniaturization of nano-wire pyramids fabricated by corner lithography. A particle trapping device was fabricated in a well-defined and symmetrical array. The entrance and exit hole-size can be tuned by adjusting fabrication parameters. We describe here

  11. Justicia en salud y genética

    Maria Graciela De Ortuzar

    2014-06-01

    Full Text Available Las expectativas puestas en el conocimiento genético exceden el ámbito de la medicina tradiciona, debido a que la intervención directa en la lotería natural demandaría el replanteamiento de conceptos centrales de justicia en salud: necesidades médicas, enfermedad, normalidad, e igualdad de oportunidades en el acceso a la salud. El punto en debate es sí el replanteo de dichos conceptos conlleva un cambio radical en las teorías de justicia (libertariana y/o liberal, mostrando su obsolescencia, o sí simplemente se requiere ampliar dichos conceptos claves por fallas estructurales en las mismas teorías. Como hipótesis general considero que los supuestos cuestionamientos, lejos de socavar las bases de las teorías de justicia, sólo ponen en evidencia sus viejos problemas estructurales. Por razones expositivas, dividiré la presentación tres partes. En la Primera parte, analizo la teoría libertariana, estudiando las contradicciones del modelo a través del impacto de la información genética en el seguro privado de salud. En la Segunda Parte, desarrollo la propuesta alternativa liberal rawlsianadanielsiana del modelo de seguro público, evaluando las implicaciones de la genética a partir de la crítica de su concepto biológico de enfermedad y su restricción al acceso a la salud por necesidades naturales. En la Tercera parte presento un modelo integral de necesidades y capacidades básicas, comprendiendo la prevención, el tratamiento y el mejoramiento moralmente permisible (genético y no genético.Mi aporte principal consiste en la elaboración de este modelo normativo integral de necesidades y capacidades para la regulación conjunta de la información y terapia genética con los restantes problemas de salud.

  12. Perda auditiva genética Genetic hearing loss

    Ricardo Godinho

    2003-01-01

    Full Text Available O progresso das pesquisas relacionadas à perda auditiva genética tem provocado um importante avanço do entendimento dos mecanismos moleculares que governam o desenvolvimento, a função, a resposta ao trauma e o envelhecimento do ouvido interno. Em países desenvolvidos, mais de 50% dos casos de surdez na infância é causada por alterações genéticas e as perdas auditivas relacionadas à idade têm sido associadas com mecanismos genéticos. OBJETIVO: O objetivo desta revisão é relatar as informações mais recentes relacionadas às perdas audtivas de origem genética. FORAMA DE ESTUDO: Revisão sistemática. MATERIAL E MÉTODO: A revisão da literatura inclui artigos indexados à MEDLINE (Biblioteca Nacional de Saúde, NIH-USA e publicados nos últimos 3 anos, além das informações disponíveis na Hereditary Hearing Loss Home Page. CONCLUSÃO: Os recentes avanços no entendimento das perdas auditivas de origem genética têm favorecido a nossa compreensão da função auditiva e tornado o diagnóstico mais apurado. Possivelmente, no futuro, este conhecimento também proporcionará o desenvolvimento de novas terapias para o tratamento das causas genéticas das perdas auditivas.The progress in the research of genetic hearing loss has advanced our understanding of the molecular mechanisms that govern inner ear development, function and response to injury and aging. In the developed world, over 50% of childhood deafness is attributable to genetic causes and even age-related hearing loss has been associated with genetic mechanisms. AIM: The objective of this review is to summarize recent knowledge in genetic hearing loss. STUDY DESIGN: Sistematic review. MATERIAL AND METHODS: The literature review included articles indexed at MEDLINE (The National Library of Medicine, The National Institute of Health - USA focusing on publications from the past 3 years plus the information available at the Hereditary Hearing Loss Home Page. CONCLUSION

  13. Aligned Layers of Silver Nano-Fibers

    Andrii B. Golovin

    2012-02-01

    Full Text Available We describe a new dichroic polarizers made by ordering silver nano-fibers to aligned layers. The aligned layers consist of nano-fibers and self-assembled molecular aggregates of lyotropic liquid crystals. Unidirectional alignment of the layers is achieved by means of mechanical shearing. Aligned layers of silver nano-fibers are partially transparent to a linearly polarized electromagnetic radiation. The unidirectional alignment and density of the silver nano-fibers determine degree of polarization of transmitted light. The aligned layers of silver nano-fibers might be used in optics, microwave applications, and organic electronics.

  14. Nano materials for Cancer Phototheranostics

    Huang, P.; Ling, D.; Song, J; Liu, G.; Xie, J.

    2016-01-01

    The rapid development of advanced nano technology promises the integration of multiple diagnostic/therapeutic modalities into one nano platform for cancer theranostics. This issue compiles 3 review articles and 7 high-quality original research articles related to the field of nano material-based cancer theranostics. Photo therapies, such as photothermal therapy (PTT), photodynamic therapy (PDT), or photo-triggered drug/gene delivery, have gained considerable attention because of specific spatiotemporal selectivity and minimal invasiveness. Considering the inherent biocompatibility and biodegradability of proteins and peptides, P. Huang and coworkers summarized recent advances in the development of protein/peptide-based photothermal cancer theranostics, using protein/peptide as delivery vehicles or synthesis bio templates of PTT agents. M. G. O∼Toole and coworkers developed a near-infrared (NIR) responsive oligonucleotide-coated (AS1411, hairpin, or both) gold nanoplate loaded with doxorubicin (DOX), which is demonstrated to be nontoxic to cells without triggered release, while being acutely toxic to cells after 5 minutes of laser exposure to trigger DOX release. K. Na and coworkers described an acidic tumor pH-responsive nanophotomedicine (pH-NanoPM), which was prepared by self-assembly of a pH-responsive polymeric photo sensitizer (pH-PPS) consisting of pH-cleavable methoxypolyethylene glycol (pH-C-mPEG), for targeted PDT

  15. Increasing Possibilities of Nano suspension

    Sutradhar, K.B.; Khatun, S.; Luna, I.P.

    2013-01-01

    Nowadays, a very large proportion of new drug candidates emerging from drug discovery programmes are water insoluble and thus poorly bioavailable. To avoid this problem, nano technology for drug delivery has gained much interest as a way to improve the solubility problems. Nano refers to particles size range of 1-1000 nm. The reduction of drug particles into the submicron range leads to a significant increase in the dissolution rate and therefore enhances bioavailability. Nanosuspensions are part of nano technology. This interacts with the body at subcellular (i.e., molecular) scales with a high degree of specificity and can be potentially translated into targeted cellular and tissue-specific clinical applications designed to achieve maximal therapeutic efficacy with minimal side effects. Production of drugs as nanosuspensions can be developed for drug delivery systems as an oral formulation and no noral administration. Here, this review describes the methods of pharmaceutical nano suspension production including advantages and disadvantages, potential benefits, characterization tests, and pharmaceutical applications in drug delivery

  16. Nano-JASMINE Data Analysis and Publication

    Yamada, Y.; Hara, T.; Yoshioka, S.; Kobayashi, Y.; Gouda, N.; Miyashita, H.; Hatsutori, Y.; Lammers, U.; Michalik, D.

    2012-09-01

    The core data reduction for the Nano-JASMINE mission is planned to be done with Gaia's Astrometric Global Iterative Solution (AGIS). A collaboration between the Gaia AGIS and Nano-JASMINE teams on the Nano-JASMINE data reduction started in 2007. The Nano-JASMINE team writes codes to generate AGIS input, and this is called Initial Data Treament (IDT). Identification of observed stars and their observed field of view, getting color index, are different from those of Gaia because Nano-JASMINE is ultra small satellite. For converting centroiding results on detector to the celestial sphere, orbit and attitude data of the satellite are used. In Nano-JASMINE, orbit information is derived from on board GPS data and attitude is processed from on-board star sensor data and on-ground Kalman filtering. We also show the Nano-JASMINE goals, status of the data publications and utilizations, and introduce the next Japanese space astrometric mission.

  17. Electrodeposition of nickel nano wire arrays

    Nur Ubaidah Saidin; Kok Kuan Ying; Ng Inn Khuan; Nurazila Mat Zali; Siti Salwa Zainal Abidin

    2010-01-01

    Synthesis, characterization and assembly of one-dimensional nickel nano wires prepared by template directed electrodeposition are discussed in this paper. Parallel arrays of high aspect ratio nickel nano wires were electrodeposited using electrolytes with different cations and pH. The nano wires were characterized using X-ray diffractometry and scanning electron microscopy. It was found that the orientations of the electro deposited Ni nano wires were governed by the deposition current and the electrolyte conditions. Free standing nickel nano wires can be obtained by dissolving the template. Due to the magnetic nature of the nano wires, magnetic alignment was employed to assemble and position the free standing nano wires in the device structure. (author)

  18. Pharmaceutical Applications of Polymeric Nano materials

    Wu, L.; Sun, L.

    2011-01-01

    With significant attention focused on nano science and nano technology in recent years, nano materials have been used in a wide variety of applications such as automotive, environmental, energy, catalysis, biomedical, drug delivery, and polymeric industries. Among those fields, the application of nano materials with pharmaceutical science is an emerging and rapidly growing field and has drawn increasing attention recently. Research and development in this field is mainly focused on several aspects such as the discoveries of novel functional nano materials, exploration on nanoparticles with controlled and targeted drug delivery characteristics, and investigation of bio functionalized and diagnostic nano materials. In this special issue, we have invited a few papers related to recent advances in pharmaceutical application of polymeric nano materials

  19. Genética e hanseníase

    Beiguelman Bernardo

    2002-01-01

    As diferentes linhas de pesquisa utilizadas para investigar a importância dos fatores hereditários humanos na determinação da resistência/suscetibilidade à infecção pelo Mycobacterium leprae foram discutidas no presente trabalho. Uma síntese dessas abordagens permitiu analisar os resultados das investigações sobre associação da hanseníase com polimorfismos genéticos, distribuição familial da hanseníase, prevalência da hanseníase e distância genética, concordância da hanseníase em gêmeos e est...

  20. Estructura y diversidad genética en vacas Holstein de Antioquia usando un polimorfismo del gen bGH

    Juan Rincon F.

    2013-03-01

    Full Text Available Objetivo. Determinar las frecuencias alélicas y genotípicas del polimorfismo del intrón 3 del gen bGH y estimar algunos parámetros de estructura poblacional en ganado Holstein. Materiales y métodos. El estudio se realizó con 1366 vacas Holstein en 120 hatos de 11 municipios del departamento de Antioquia. Se extrajo DNA por el método de Salting out y la genotipificación se realizó usando la técnica de PCR-RFLPs. La diversidad genética se determinó mediante la comparación de las heterocigosidades, El equilibrio de Hardy-Weinberg (HW y la diferenciación genética entre las poblaciones se realizó usando el software Arlequín 2.0 Las frecuencias alélicas y genotípicas se evaluaron mediante el paquete estadístico SAS®. Resultados. Las frecuencias genotípicas encontradas fueron 0.764 (+/+, 0.223 (+/- y 0.013 (-/- y las frecuencias alélicas 0.876 (+ y 0.124 (-. No se encontraron desviaciones del Equilibrio de Hardy Weinberg en ninguna de las subpoblaciones. La diversidad genética determinada mediante la comparación de las heterocigosidades fue relativamente baja entre poblaciones pero al interior de estas no. El valor de FST de toda la población fue de 0.0068 y significativo (p<0.05, algunos FST pareados también lo fueron, tomando valores desde 0.0 a 0.13. Los estadísticos FIT y FIS no fueron significativos. Conclusiones. El gen bGH es un candidato interesante para evaluar características de importancia económica ya que no parece haber sido sometido a selección directa, presenta una variabilidad media en las poblaciones, observándose diferenciación genética significativa entre distintos municipios, producto de los diferentes sistemas de producción y acceso a las biotecnologías.

  1. NextGen Avionics Roadmap Version 2.0

    2011-09-30

    Systems Analysis ( IPSA ) Division has defined multiple NextGen Operational (NGOps) Levels, projecting relative performance and risk based on differing...degrees of capability improvements, as shown in Figure 4. IPSA forecasts include the most likely performance NGOps level (i.e., NGOps 3-4), as well...in the near-term. Figures 5 through 9 de- pict the various programs and capabilities aligned with the various NGOps levels. Factors from the IPSA

  2. EVALUATION DE LA SENSIBILITE A Bemisia tabaci (GEN) DE 13 ...

    AISA

    champ, le comportement de 13 variétés de tomate contre la pression de Bemisia tabaci (Gen), une mouche vecteur du virus de la jaunisse en cuillère des ... en saison sèche il y a une vingtaine d'années atteignaient 100 % et les pertes de production ... semaines. Le semis s'est effectué sur une planche de 9 m2 (9 x 1 m2).

  3. SALOME PLATFORM and TetGen for Polyhedral Mesh Generation

    Lee, Sang Yong; Park, Chan Eok; Kim, Shin Whan [KEPCO E and C Company, Inc., Daejeon (Korea, Republic of)

    2014-05-15

    SPACE and CUPID use the unstructured mesh and they also require reliable mesh generation system. The combination of CAD system and mesh generation system is necessary to cope with a large number of cells and the complex fluid system with structural materials inside. In the past, a CAD system Pro/Engineer and mesh generator Pointwise were evaluated for this application. But, the cost of those commercial CAD and mesh generator is sometimes a great burden. Therefore, efforts have been made to set up a mesh generation system with open source programs. The evaluation of the TetGen has been made in focusing the application for the polyhedral mesh generation. In this paper, SALOME will be evaluated for the efforts in conjunction with TetGen. In section 2, review will be made on the CAD and mesh generation capability of SALOME. SALOME and TetGen codes are being integrated to construct robust polyhedral mesh generator. Edge removal on the flat surface and vertex reattachment to the solid are two challenging tasks. It is worthwhile to point out that the Python script capability of the SALOME should be fully utilized for the future investigation.

  4. The GenABEL Project for statistical genomics.

    Karssen, Lennart C; van Duijn, Cornelia M; Aulchenko, Yurii S

    2016-01-01

    Development of free/libre open source software is usually done by a community of people with an interest in the tool. For scientific software, however, this is less often the case. Most scientific software is written by only a few authors, often a student working on a thesis. Once the paper describing the tool has been published, the tool is no longer developed further and is left to its own device. Here we describe the broad, multidisciplinary community we formed around a set of tools for statistical genomics. The GenABEL project for statistical omics actively promotes open interdisciplinary development of statistical methodology and its implementation in efficient and user-friendly software under an open source licence. The software tools developed withing the project collectively make up the GenABEL suite, which currently consists of eleven tools. The open framework of the project actively encourages involvement of the community in all stages, from formulation of methodological ideas to application of software to specific data sets. A web forum is used to channel user questions and discussions, further promoting the use of the GenABEL suite. Developer discussions take place on a dedicated mailing list, and development is further supported by robust development practices including use of public version control, code review and continuous integration. Use of this open science model attracts contributions from users and developers outside the "core team", facilitating agile statistical omics methodology development and fast dissemination.

  5. GEN IV reactors: Where we are, where we should go

    Locatelli, G.; Mancini, M.; Todeschini, N.

    2012-01-01

    GEN IV power plants represent the mid-long term option of the nuclear sector. International literature proposes many papers and reports dealing with these reactors, but there is an evident difference of type and shape of information making impossible each kind of detailed comparison. Moreover, authors are often strongly involved in some particular design; this creates many difficulties in their super-partes position. Therefore it is necessary to put order in the most relevant information to understand strengths and weaknesses of each design and derive an overview useful for technicians and policy makers. This paper presents the state-of the art for GEN IV nuclear reactors providing a comprehensive literature review of the different designs with a relate taxonomy. It presents the more relevant references, data, advantages, disadvantages and barriers to the adoptions. In order to promote an efficient and wide adoption of GEN IV reactors the paper provides the pre-conditions that must be accomplished, enabling factors promoting the implementation and barriers limiting the extent and intensity of its implementation. It concludes outlying the state of the art of the most important R and D areas and the future achievements that must be accomplished for a wide adoption of these technologies. (authors)

  6. Variabilidad genética en Prosopis ferox (Mimosaceae

    Alicia D. Burghardt

    2004-01-01

    Full Text Available Prosopis ferox (Mimosaceae es una especie arbustiva o arbórea espinosa que se distribuye desde el Sur de Bolivia hasta el noroeste de la Argentina. En la provincia de Jujuy se encuentra a grandes alturas (entre los 2400 y los 3700 m s.m.. Existe una gran variabilidad morfológica, especialmente en cuanto a las dimensiones del fruto y la cantidad de semillas por fruto, ambas características importantes debido al uso de esta planta como forraje. Con el objeto de verificar si existe además variabilidad genética, se realizó un estudio electroforético de proteínas seminales de árboles procedentes de distintas localidades de la provincia de Jujuy. Los patrones polipeptídicos obtenidos por SDS-PAGE presentaron en total 26 bandas. Cada población se caracterizó por sus patrones de presencia-ausencia de bandas, habiéndose encontrado variabilidad intrapoblacional (polimorfismo en algunas de ellas, siendo otras genéticamente homogéneas. Los índices polimórficos en poblaciones de P. ferox son comparables a los obtenidos previamente en P. ruscifolia. La variabilidad genética interpoblacional hallada por medio del estudio electroforético de las proteínas seminales hace suponer la existencia de ecotipos

  7. From Gold Nano-particles through Nano-wire to Gold Nano-layers on Substrate

    Švorčík, V.; Kolská, Z.; Slepička, P.; Siegel, J.; Hnatowicz, Vladimír

    2010-01-01

    Roč. 2010, G (2010), s. 1-57. ISBN 978-1-61668-009-1 Institutional support: RVO:61389005 Keywords : thin films * Au nano layers * AFM Subject RIV: BM - Solid Matter Physics ; Magnetism https://www.novapublishers.com/catalog/product_info.php?products_id=12909

  8. Divergência, variabilidade genética e desempenho agronômico em genótipos de couve.

    Azevedo, Alcinei Mistico

    2012-01-01

    Embora haja grande variabilidade genética para a couve, são poucos trabalhos no Brasil que visão obter informações para programas de melhoramento genético nesta cultura. Assim, objetivou-se neste trabalho caracterizar 30 genótipos de couve a partir de caracteres morfo-agronômicos para estimar a divergência genética, a importância dos caracteres para a divergência, o desempenho agronômico, os parâmetros genéticos e a correlação entre as características avaliadas. O experimento foi conduzido na...

  9. Thermal Conductivity of Nano-fluids in Nano-channels

    Frank, M; Asproulis, N; Drikakis, D; 4th Micro and Nano Flows Conference (MNF2014)

    2014-01-01

    This paper was presented at the 4th Micro and Nano Flows Conference (MNF2014), which was held at University College, London, UK. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute, ASME Press, LCN London Centre for Nanotechnology, UCL University College London, U...

  10. Crescimento de genótipos de frangos tipo caipira

    R. C. Veloso

    2015-10-01

    Full Text Available RESUMOObjetivou-se com este trabalho comparar o padrão de crescimento, mediante ajustes das respectivas curvas de crescimento por modelos não lineares, bem como estudar o desenvolvimento de cortes de carcaça em relação ao peso da carcaça em diferentes genótipos de frangos tipo caipira. Foram utilizados 840 pintos de um dia, machos, distribuídos em delineamento inteiramente ao acaso, dos seguintes genótipos da linhagem Redbro: Caboclo, Carijó, Colorpak, Gigante Negro, Pesadão Vermelho, Pescoço Pelado e Tricolor. As aves foram alojadas em 28 boxes, sendo 30 aves/boxe, em galpão de alvenaria com acesso a um piquete de 45m², com quatro repetições. O peso corporal individual dos frangos foi medido ao nascer, aos 14, 28, 42, 56, 70 e 84 dias de idade. Para a determinação das curvas de crescimento do peso corporal das aves, os dados coletados foram avaliados por meio dos modelos não lineares: Brody, Gompertz, Logístico, Richards e von Bertalanffy. Foi empregado o PROC NLIN do SAS, utilizando-se o método interativo de Gauss-Newton. Os critérios usados para escolha do modelo de melhor ajuste da curva de crescimento foram o coeficiente de determinação, o desvio padrão assintótico, o desvio médio absoluto dos resíduos e o índice assintótico. As análises para obtenção dos coeficientes alométricos foram realizadas por meio do PROC GLM do SAS para os genótipos Carijó, Colorpak, Pesadão Vermelho, Pescoço Pelado e Tricolor. Foram avaliados os pesos da carcaça, do peito, das coxas, das sobrecoxas, das pernas e das asas das aves abatidas aos 85 dias de idade. Apenas as equações propostas por Gompertz, von Bertalanffy e Logístico atingiram a convergência, e o modelo proposto por von Bertalanffy foi o mais adequado para descrever o crescimento dos genótipos de frangos caipiras. Todos os cortes avaliados apresentaram crescimento tardio em relação ao peso da carcaça em genótipos de frangos tipo caipira.

  11. From AWE-GEN to AWE-GEN-2d: a high spatial and temporal resolution weather generator

    Peleg, Nadav; Fatichi, Simone; Paschalis, Athanasios; Molnar, Peter; Burlando, Paolo

    2016-04-01

    A new weather generator, AWE-GEN-2d (Advanced WEather GENerator for 2-Dimension grid) is developed following the philosophy of combining physical and stochastic approaches to simulate meteorological variables at high spatial and temporal resolution (e.g. 2 km x 2 km and 5 min for precipitation and cloud cover and 100 m x 100 m and 1 h for other variables variable (temperature, solar radiation, vapor pressure, atmospheric pressure and near-surface wind). The model is suitable to investigate the impacts of climate variability, temporal and spatial resolutions of forcing on hydrological, ecological, agricultural and geomorphological impacts studies. Using appropriate parameterization the model can be used in the context of climate change. Here we present the model technical structure of AWE-GEN-2d, which is a substantial evolution of four preceding models (i) the hourly-point scale Advanced WEather GENerator (AWE-GEN) presented by Fatichi et al. (2011, Adv. Water Resour.) (ii) the Space-Time Realizations of Areal Precipitation (STREAP) model introduced by Paschalis et al. (2013, Water Resour. Res.), (iii) the High-Resolution Synoptically conditioned Weather Generator developed by Peleg and Morin (2014, Water Resour. Res.), and (iv) the Wind-field Interpolation by Non Divergent Schemes presented by Burlando et al. (2007, Boundary-Layer Meteorol.). The AWE-GEN-2d is relatively parsimonious in terms of computational demand and allows generating many stochastic realizations of current and projected climates in an efficient way. An example of model application and testing is presented with reference to a case study in the Wallis region, a complex orography terrain in the Swiss Alps.

  12. Nano catalysis: Academic Discipline and Industrial Realities

    Olveira, S.; Forster, S.P.; Seeger, S.

    2014-01-01

    Nano technology plays a central role in both academic research and industrial applications. Nano enabled products are not only found in consumer markets, but also importantly in business to business markets (B2B). One of the oldest application areas of nano technology is nano catalysis—an excellent example for such a B2 B market. Several existing reviews illustrate the scientific developments in the field of nano catalysis. The goal of the present review is to provide an up-to-date picture of academic research and to extend this picture by an industrial and economic perspective. We therefore conducted an extensive search on several scientific databases and we further analyzed more than 1,500 nano catalysis-related patents and numerous market studies. We found that scientists today are able to prepare nano catalysts with superior characteristics regarding activity, selectivity, durability, and recoverability, which will contribute to solve current environmental, social, and industrial problems. In industry, the potential of nano catalysis is recognized, clearly reflected by the increasing number of nano catalysis-related patents and products on the market. The current nano catalysis research in academic and industrial laboratories will therefore enable a wealth of future applications in the industry

  13. Editorial Nano structures for Medicine and Pharmaceuticals

    Xing-Jie, L.; Kumar, A.; Donglu, S.; Daxiang, C.

    2012-01-01

    The rapid developments in nano structured materials and nano technology will have profound impact in many areas of biomedical applications including delivery of drugs and biomolecules, tissue engineering, detection of bio markers, cancer diagnosis, cancer therapy, and imaging. This field is expanding quickly, and a lot of work is ongoing in the design, characterization, synthesis, and application of materials, for controlling shape and size at nanometer scale to develop highly advanced materials for biomedical application and even to design better pharmaceutical products. In recent years, novel nano structure with multi functionalities has been focused on the use of nano structures toward solving problems of biology and medicine. The main scope of this special issue is to demonstrate the latest achievement of nano technology and its application in nano medicine particularly in new approaches for drug delivery such as targeted drug delivery system, nano structure for drug storage, nano materials for tissue engineering, medical diagnosis and treatment, and generation of new kinds of materials from biological sources. Therefore, many critical issues in nano structured materials, particularly their applications in biomedicine, must be addressed before clinical applications. This special issue devotes several review and research articles encompassing various aspects of nano materials for medicine and pharmaceuticals.

  14. J3Gen: A PRNG for Low-Cost Passive RFID

    Jordi Herrera-Joancomartí

    2013-03-01

    Full Text Available Pseudorandom number generation (PRNG is the main security tool in low-cost passive radio-frequency identification (RFID technologies, such as EPC Gen2. We present a lightweight PRNG design for low-cost passive RFID tags, named J3Gen. J3Gen is based on a linear feedback shift register (LFSR configured with multiple feedback polynomials. The polynomials are alternated during the generation of sequences via a physical source of randomness. J3Gen successfully handles the inherent linearity of LFSR based PRNGs and satisfies the statistical requirements imposed by the EPC Gen2 standard. A hardware implementation of J3Gen is presented and evaluated with regard to different design parameters, defining the key-equivalence security and nonlinearity of the design. The results of a SPICE simulation confirm the power-consumption suitability of the proposal.

  15. NanoChemistry Group at DTU uses NanoSight's NTA System for Nanoparticle Characterization

    2011-01-01

    (Nanowerk News) NanoSight, leading manufacturers of unique nanoparticle characterization technology, describes how the Nano Chemistry group at DTU Copenhagen is utilizing nanoparticle tracking analysis, NTA, in its research and teaching programs....

  16. Nano- and micro-electromechanical systems fundamentals of nano- and microengineering

    Lyshevski, Sergey Edward

    2005-01-01

    NANOTECHNOLOGY AND MICROTECHNOLOGY (NANO- AND MICRO- SCIENCE, ENGINEERING AND TECHNOLOGY), AND BEYOND Introduction and Overview: From Micro- to Nano- and Beyond to Stringo-Scale Introductory Definitions to the Subjects Current Developments and Needs for Coherent Revolutionary Developments Societal Challenges and Implications NANO- AND MICROSCALE SYSTEMS, DEVICES, AND STRUCTURES Sizing Features: From Micro- to Nano-, and from Nano- to Stringo-Scale MEMS and NEMS Definitions Introduction to Taxonomy of Nano- and Microsystem Synthesis and Design Introduction to Design and Optimization of Nano- and Microsystems in the Behavioral Domain NANO- AND MICROSYSTEMS: CLASSIFICATION AND CONSIDERATION Biomimetics, Biological Analogies,and Design of NEMS and MEMS Micro- and Nanoelectromechanical Systems: Scaling Laws and Mathematical Modeling MEMS Examples and MEMS Architectures Introduction to Microfabrication and Micromachining FUNDAMENTALS OF MICROFABRICATION AND MEMS FABRICATION TECHNOLOGIES Introducti...

  17. The 1st reveal of Gen-V nuclear energy. Prospecting investigation of nuclear power 2050 (A2050) for energy innovation in the nuclear industry

    Woo, Tae Ho; Lee, Soon Ho

    2012-01-01

    The proposed strategy for the future nuclear energy is analyzed. The conventional nuclear power plants (NPPs) are investigated by the 21 st style interdisciplinary research as the information technology (IT), nanotechnology (NT), and biological technology (BT). New kinds of energy production methods as spherical isotropic power reactor (SIPR) and nano lattice power (NLP) are introduced. In addition, the problems of Gen-IV technologies are challenged to be solved, which is the matters of the mechanical and thermal controls of several coolants cases. The simulation result shows the increasing for the usefulness of the business. The core and vessel are very tractable due to moving core vessel (SIPR). The concept of safety system is changed to be submerged into coolant instead of injection concept (SIPR). The commercial fusion energy is realized for mass energy productions (NLP). Eventually, the safety as well as economical status is increased comparing to previous NPPs. (orig.)

  18. The 1{sup st} reveal of Gen-V nuclear energy. Prospecting investigation of nuclear power 2050 (A2050) for energy innovation in the nuclear industry

    Woo, Tae Ho [Seoul National Univ. (Korea, Republic of). Dept. of Nuclear Engineering; Lee, Seok Jong [POSCO Engineering and Construction Co., Ltd., Incheon (Korea, Republic of); Lee, Soon Ho [SK Engineering and Construction Co., Ltd., Seoul (Korea, Republic of)

    2012-11-15

    The proposed strategy for the future nuclear energy is analyzed. The conventional nuclear power plants (NPPs) are investigated by the 21{sup st} style interdisciplinary research as the information technology (IT), nanotechnology (NT), and biological technology (BT). New kinds of energy production methods as spherical isotropic power reactor (SIPR) and nano lattice power (NLP) are introduced. In addition, the problems of Gen-IV technologies are challenged to be solved, which is the matters of the mechanical and thermal controls of several coolants cases. The simulation result shows the increasing for the usefulness of the business. The core and vessel are very tractable due to moving core vessel (SIPR). The concept of safety system is changed to be submerged into coolant instead of injection concept (SIPR). The commercial fusion energy is realized for mass energy productions (NLP). Eventually, the safety as well as economical status is increased comparing to previous NPPs. (orig.)

  19. Update History of This Database - GenLibi | LSDB Archive [Life Science Database Archive metadata

    Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data ...List Contact us GenLibi Update History of This Database Date Update contents 2014/03/25 GenLibi English archi...base Description Download License Update History of This Database Site Policy | Contact Us Update History of This Database - GenLibi | LSDB Archive ... ...ve site is opened. 2007/03/01 GenLibi ( http://gene.biosciencedbc.jp/ ) is opened. About This Database Data

  20. Seleção de genótipos parentais de acerola com base na divergência genética multivariada

    CARPENTIERI-PÍPOLO VALÉRIA

    2000-01-01

    Full Text Available Este trabalho teve por objetivo identificar e selecionar genótipos parentais de acerola (Malpighia emarginata L. adequadas a programas de melhoramento genético. Nove caracteres quantitativos de maior importância agronômica foram usados para determinação da distância genética e formação de grupos similares de acessos. O agrupamento pelo método de Tocher, a partir das distâncias generalizadas de Mahalanobis, possibilitou a divisão de 14 genótipos em três grupos. Com base na divergência genética e no caráter agronômico-chave (teor de vitamina C, destacaram-se como mais promissores os cruzamentos dos genótipos: AM Mole pertencente ao grupo III, com os genótipos PR AM, N° 18, PR 17, PR 16, Eclipse, AM 22 e Dominga, todos pertencentes ao grupo I.

  1. Nano materials for Medical and Dental Applications

    Yub Kwon, T.; Oh, D.S.; Narayanan, R.

    2015-01-01

    Welcome to this special issue. Nano science and nano technology concepts are applicable across all fields of science and a more widespread application of nano materials and nano technologies is imminent or already occurring in many areas, including health care. Today is scientists take those cutting-edge technologies and concepts and apply them to medicine and dentistry. They are finding a wide variety of ways to make medical and dental materials at the nano scale to take advantage of their enhanced physical and biological properties.The purpose of this special issue is to publish high-quality research papers as well as review articles addressing recent advances in the field of nano materials for medical and dental applications. A particular interest is given to papers exploring or discussing nano materials and nano technologies related to delivery system, bonding substitutes, and surface modification techniques applicable in these areas. For this special issue, several investigators were invited to contribute original research findings that can stimulate continuing efforts to understand the cutting-edge applications of nano materials in medicine and dentistry.

  2. Bio/Nano Electronic Devices and Sensors

    Jones, W. K

    2008-01-01

    .... Flexible micromanipulator probes developed for probing waveguides. (5) Doped nano-diamonds and nanoceramic lasers- optically transparent YAG were demonstrated, and yttrium aluminum perovskite (YAP...

  3. Semiconductor Nano wires and Nano tubes: From Fundamentals to Diverse Applications

    Xiong, Q.; Grimes, C.A.; Zacharias, M.; Morral, A.F.; Hiruma, K.; Shen, G.

    2012-01-01

    Research in the field of semiconductor nano wires (SNWs) and nano tubes has been progressing into a mature subject with several highly interdisciplinary sub areas such as nano electronics, nano photonics, nano composites, bio sensing, optoelectronics, and solar cells. SNWs represent a unique system with novel properties associated to their one-dimensional (1D) structures. The fundamental physics concerning the formation of discrete 1D subbands, coulomb blockade effects, ballistic transport, and many-body phenomena in 1D nano wires and nano tubes provide a strong platform to explore the various scientific aspects in these nano structures. A rich variety of preparation methods have already been developed for generating well-controlled 1D nano structures and from a broad range of materials. The present special issue focuses on the recent development in the mechanistic understanding of the synthesis, the studies on electrical/optical properties of nano wires and their applications in nano electronics, nano photonics, and solar-energy harvesting. In this special issue, we have several invited review articles and contributed papers that are addressing current status of the fundamental issues related to synthesis and the diverse applications of semiconducting nano wires and nano tubes. One of the papers reviews the progress of the top-down approach of developing silicon-based vertically aligned nano wires to explore novel device architectures and integration schemes for nano electronics and clean energy applications. Another paper reviews the recent developments and experimental evidences of probing the confined optical and acoustic phonon in nonpolar semiconducting (Si and Ge) nano wires using Raman spectroscopy. The paper by K. Hiruma et al. spotlights the III semiconductor nano wires and demonstrates selective-area metal organic vapor phase epitaxy grown GaAs/In(Al)GaAs and InP/InAs/InP nano wires with heterojunctions along their axial and radial directions. The paper

  4. Distancias genéticas en poblaciones del NOA

    Acreche, Noemí

    1996-01-01

    Full Text Available La mayor parte de los trabajos realizados en nuestro país sobre polimorfismos hematológicos, abordan la necesaria descripción de las poblaciones. Se pone de relieve la importancia de encarar estudios, en base a la valiosa información publicada, que vinculen los grupos con técnicas que permitan realizar nuevas inferencias sobre sus relaciones. Conocidas en gran medida en cuanto a sus manifestaciones culturales, pueden aportar desde lo genético a la comprensión de los procesos microevolutivos ocurridos en una región. Para el NOA, se ha considerado la presencia de comunidades aborígenes incluídas en cuatro familias lingüísticas. Se tendrán en cuenta estos complejos como representativos de afinidades que se establecen a partir de estrechas relaciones entre las etnias, no sólo por la lengua, sino también por las características de sus sistemas productivos, religiosidad y organización. En base a las frecuencias génicas publicadas correspondientes a los siguientes alelos: I*A, I*B, I*O; M, N, S, s; Dia , Dib; P1, P2; C, c; D, d, E, e; Le, le; Fya, Fyb; Jka, Jkb; K y k se construyeron tablas de frecuencias. Se estimaron los coeficientes de distancias genéticas que fueron analizados y posteriormente incluídos en la construcción de un fenograma de los grupos de estudio, mediante agrupaciones (Sahn Cluster secuenciales, aglomerativas, jerárquicas y anidadas. De acuerdo a la información recopilada de las frecuencias de los 25 alelos estudiados en trece poblaciones de aborígenes del NOA y Paraguay, las distancias genéticas obtenidas reflejan los caracteres lingüístico-culturales.

  5. La fiction de Madame de Genlis, espace d’interrogation

    Isabelle Tremblay

    2013-09-01

    Full Text Available The novel constitutes an ideal genre in which to discuss a central question in the eighteenth century: virtue. As opposed to her contemporaries, Mme de Genlis depicts virtue as a state of mind attained through independence and self-confidence rather than through the atonement of one’s faults. How do her heroines realize their potential? Are they able to find a middle ground between their perception of their roles and identity and the expectations that weigh on them? What paths are available to them?

  6. Reactor physics challenges in GEN-IV reactor design

    Driscoll, Michael K.; Hejzlar, Pavel

    2005-01-01

    An overview of the reactor physics aspects of GENeration Four (GEN-IV) advanced reactors is presented, emphasizing how their special requirements for enhanced sustainability, safety and economics motivates consideration of features not thoroughly analyzed in the past. The resulting concept-specific requirements for better data and methods are surveyed, and some approaches and initiatives are suggested to meet the challenges faced by the international reactor physics community. No unresolvable impediments to successful development of any of the six major types of proposed reactors are identified, given appropriate and timely devotion of resources

  7. Sistema genérico de replicación

    Jiménez Ortiz, Raúl

    2014-01-01

    Este proyecto se desarrolla en una de las principales compañías eléctricas de España, y trata sobre la creación de un sistema genérico de replicación de datos. La idea surge de la necesidad de estandarizar la forma de traspasar información entre departamentos o sistemas, debido a que existen gran variedad de interfaces diferentes, y cada vez que surge la necesidad de crear una implica nuevos costes de desarrollo, mantenimiento y futuros evolutivos. Entre los diferentes departamentos de ...

  8. TrayGen: Arranging objects for exhibition and packaging

    Yang, Yongliang

    2013-10-01

    We present a framework, called TrayGen, to generate tray designs for the exhibition and packaging of a collection of objects. Based on principles from shape perception and visual merchandising, we abstract a number of design guidelines on how to organize the objects on the tray for the exhibition of their individual features and mutual relationships. Our framework realizes these guidelines by analyzing geometric shapes of the objects and optimizing their arrangement. We demonstrate that the resultant tray designs not only save space, but also highlight the characteristic of each object and the inter-relations between objects. © 2013 The Eurographics Association and John Wiley & Sons Ltd.

  9. Justicia en salud y genética

    Maria Graciela De Ortuzar

    2014-01-01

    Las expectativas puestas en el conocimiento genético exceden el ámbito de la medicina tradiciona, debido a que la intervención directa en la lotería natural demandaría el replanteamiento de conceptos centrales de justicia en salud: necesidades médicas, enfermedad, normalidad, e igualdad de oportunidades en el acceso a la salud. El punto en debate es sí el replanteo de dichos conceptos conlleva un cambio radical en las teorías de justicia (libertariana y/o liberal), mostrando su obsolescencia,...

  10. Reactor physics challenges in GEN-IV reactor design

    Driscoll, Michael K.; Hejzlar, Pavel [Massachusetts Institute of Technology, MA (United States)

    2005-02-15

    An overview of the reactor physics aspects of GENeration Four (GEN-IV) advanced reactors is presented, emphasizing how their special requirements for enhanced sustainability, safety and economics motivates consideration of features not thoroughly analyzed in the past. The resulting concept-specific requirements for better data and methods are surveyed, and some approaches and initiatives are suggested to meet the challenges faced by the international reactor physics community. No unresolvable impediments to successful development of any of the six major types of proposed reactors are identified, given appropriate and timely devotion of resources.

  11. Metal Oxide Nano structures: Synthesis, Properties, and Applications

    Xu, L. H.; Patil, D. S.; Yang, J.; Xiao, J.

    2015-01-01

    In recent years, nano structured materials have attracted wide attention due to their fascinating optical and electrical properties, which make these materials potentially suitable for applications in electronics, optics, photonics, and sensors. Some metal oxides show a wide variety of morphologies such as nano wires, nano rods, nano tubes, nano rings, and nano belts. Synthesis and investigation of these metal-oxide nano structures are beneficial not only for understanding the fundamental phenomena in low dimensional systems, but also for developing new-generation nano devices with high performance.

  12. Nano-Ceramic Coated Plastics

    Cho, Junghyun

    2013-01-01

    Plastic products, due to their durability, safety, and low manufacturing cost, are now rapidly replacing cookware items traditionally made of glass and ceramics. Despite this trend, some still prefer relatively expensive and more fragile ceramic/glassware because plastics can deteriorate over time after exposure to foods, which can generate odors, bad appearance, and/or color change. Nano-ceramic coatings can eliminate these drawbacks while still retaining the advantages of the plastic, since the coating only alters the surface of the plastic. The surface coating adds functionality to the plastics such as self-cleaning and disinfectant capabilities that result from a photocatalytic effect of certain ceramic systems. These ceramic coatings can also provide non-stick surfaces and higher temperature capabilities for the base plastics without resorting to ceramic or glass materials. Titanium dioxide (TiO2) and zinc oxide (ZnO) are the candidates for a nano-ceramic coating to deposit on the plastics or plastic films used in cookware and kitchenware. Both are wide-bandgap semiconductors (3.0 to 3.2 eV for TiO2 and 3.2 to 3.3 eV for ZnO), so they exhibit a photocatalytic property under ultraviolet (UV) light. This will lead to decomposition of organic compounds. Decomposed products can be easily washed off by water, so the use of detergents will be minimal. High-crystalline film with large surface area for the reaction is essential to guarantee good photocatalytic performance of these oxides. Low-temperature processing (nano-ceramic coatings (TiO2, ZnO) on plastic materials (silicone, Teflon, PET, etc.) that can possess both photocatalytic oxide properties and flexible plastic properties. Processing cost is low and it does not require any expensive equipment investment. Processing can be scalable to current manufacturing infrastructure.

  13. Nano-Electrochemistry and Nano-Electrografting with an Original Combined AFM-SECM

    Ammar Ben Brahim

    2013-05-01

    Full Text Available This study demonstrates the advantages of the combination between atomic force microscopy and scanning electrochemical microscopy. The combined technique can perform nano-electrochemical measurements onto agarose surface and nano-electrografting of non-conducting polymers onto conducting surfaces. This work was achieved by manufacturing an original Atomic Force Microscopy-Scanning ElectroChemical Microscopy (AFM-SECM electrode. The capabilities of the AFM-SECM-electrode were tested with the nano-electrografting of vinylic monomers initiated by aryl diazonium salts. Nano-electrochemical and technical processes were thoroughly described, so as to allow experiments reproducing. A plausible explanation of chemical and electrochemical mechanisms, leading to the nano-grafting process, was reported. This combined technique represents the first step towards improved nano-processes for the nano-electrografting.

  14. Synthesis and characterization of nano hydroxyapatite using reverse micro emulsions as nano reactors

    Amin, S.; Siddique, T.

    2015-01-01

    In the present work reverse micro emulsion has been employed as nano reactors to synthesize nano crystalline Hydroxyapatite (HA). Two precursors; calcium and phosphate with different counter ions of each were used for the synthesis of HA at two different temperatures. To maintain the emulsified nano reactor, cyclohexane, TX-100 and 1-butanol including phosphate precursor was the continuous phase while aqueous Ca precursor solution was taken as the dispersed phase. Nano crystalline particles thus produced were evaluated on the basis of synthesis route, counter ions and temperature. It has been shown that emulsified nano reactors control the morphology, particle size and minimize phase transformation of HA. Characterizations of nano powder of HA are carried out using x-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FTIR), and scanning electron microscopy (SEM). HA crystallite size was found to be in the range of 20-25 nm whereas the morphology of nano particles changed from spheres to rods. (author)

  15. Nano-Electrochemistry and Nano-Electrografting with an Original Combined AFM-SECM

    Ghorbal, Achraf; Grisotto, Federico; Charlier, Julienne; Palacin, Serge; Goyer, Cédric; Demaille, Christophe; Ben Brahim, Ammar

    2013-01-01

    This study demonstrates the advantages of the combination between atomic force microscopy and scanning electrochemical microscopy. The combined technique can perform nano-electrochemical measurements onto agarose surface and nano-electrografting of non-conducting polymers onto conducting surfaces. This work was achieved by manufacturing an original Atomic Force Microscopy-Scanning ElectroChemical Microscopy (AFM-SECM) electrode. The capabilities of the AFM-SECM-electrode were tested with the nano-electrografting of vinylic monomers initiated by aryl diazonium salts. Nano-electrochemical and technical processes were thoroughly described, so as to allow experiments reproducing. A plausible explanation of chemical and electrochemical mechanisms, leading to the nano-grafting process, was reported. This combined technique represents the first step towards improved nano-processes for the nano-electrografting. PMID:28348337

  16. Enfermedades genéticas del ADN mitocondrial humano

    Solano Abelardo

    2001-01-01

    Full Text Available Las enfermedades mitocondriales son un grupo de trastornos que están producidos por un fallo en el sistema de fosforilación oxidativa (sistema Oxphos, la ruta final del metabolismo energético mitocondrial, con la consiguiente deficiencia en la biosíntesis del trifosfato de adenosina (ATP, por sus siglas en inglés. Parte de los polipéptidos que componen este sistema están codificados en el ácido desoxirribonucleico (DNA mitocondrial y, en los últimos años, se han descrito mutaciones que se han asociado con síndromes clínicos bien definidos. Las características genéticas del DNA mitocondrial, herencia materna, poliplasmia y segregación mitótica, confieren a estas enfermedades propiedades muy particulares. Las manifestaciones clínicas de estas enfermedades son muy heterogéneas y afectan a distintos órganos y tejidos por lo que su correcto diagnóstico implica la obtención de datos clínicos, morfológicos, bioquímicos y genéticos. El texto completo en inglés de este artículo está disponible en: http://www.insp.mx/salud/index.html

  17. PowerGen plc report and accounts 1995

    NONE

    1995-12-31

    Detailed financial results are presented for the United Kingdom power generation company PowerGen for the year ended 2 April 1995. A review is given of operating and financial performance. Significant reductions in operating costs and improvements in productivity have been achieved. Diversity of fuels and plant portfolio has been enhanced by building 3000 MW of gas fired CCGT plant. Investment in coal import facilities has increased access to international coal markets. Environmental performance has improved with further reductions in SO{sub 2}, NO{sub x} and CO{sub 2} emissions. Overseas projects include construction of 990 MW CCGT power station in Portugal and a contract to build the 1200 MW Paiton 2 coal-fired power station in Indonesia. Investment in lignite mining and power generation assets of MIBRAG in Germany is contributing to profits. PowerGen`s five year contract for coal supply was assigned to RJB Mining (UK) Ltd. during the year. Stocks of coal fell during the year and further reductions are expected during 1995/96.

  18. Managing collaboration in the nanoManipulator

    Hudson, Thomas C.; Helser, Aren T.; Sonnenwald, Diane H.

    2004-01-01

    We designed, developed, deployed, and evaluated the Collaborative nanoManipulator (CnM), a distributed, collaborative virtual environment system supporting remote scientific collaboration between users of the nanoManipulator interface to atomic force microscopes. This paper describes the entire...

  19. Instrument platforms for nano liquid chromatography

    Šesták, Jozef; Moravcová, Dana; Kahle, Vladislav

    2015-01-01

    Roč. 1421, NOV (2015), s. 2-17 ISSN 0021-9673 R&D Projects: GA MV VG20112015021 Institutional support: RVO:68081715 Keywords : nano liquid chromatography * splitless gradient generation * nano LC platforms Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 3.926, year: 2015 http://hdl.handle.net/11104/0250900

  20. Nano cobalt oxides for photocatalytic hydrogen production

    Mangrulkar, Priti A.

    2012-07-01

    Nano structured metal oxides including TiO 2, Co 3O 4 and Fe 3O 4 have been synthesized and evaluated for their photocatalytic activity for hydrogen generation. The photocatalytic activity of nano cobalt oxide was then compared with two other nano structured metal oxides namely TiO 2 and Fe 3O 4. The synthesized nano cobalt oxide was characterized thoroughly with respect to EDX and TEM. The yield of hydrogen was observed to be 900, 2000 and 8275 mmol h -1 g -1 of photocatalyst for TiO 2, Co 3O 4 and Fe 3O 4 respectively under visible light. It was observed that the hydrogen yield in case of nano cobalt oxide was more than twice to that of TiO 2 and the hydrogen yield of nano Fe 3O 4 was nearly four times as compared to nano Co 3O 4. The influence of various operating parameters in hydrogen generation by nano cobalt oxide was then studied in detail. Copyright © 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

  1. Application of nano-packaging in aquatics

    D Jafarpour

    2018-03-01

    Conclusion: With regard to aquatics high nutritional value and their important presence in diet one should think of a way to increase it's survivability and maintaining quality. For this, nano technology can help packaging aquatics. Nano can be applied considerably in food health and environment protection.

  2. Villem Nano, pedagoog ja haritlane / Villem Normak

    Normak, Villem

    2009-01-01

    Matemaatikaõpetaja, koolijuhi Villem Nano elust ja tegevusest. 1. juulil 1919 käivitas Villem Nano Tallinna õpetajate seminari, millest on läbi mitme nime- ja staatusemuudatuse kujunenud välja tänane Tallinna Ülikool

  3. Dipole nano-laser: Theory and properties

    Ghannam, T., E-mail: gtalal@hotmail.com [King Abdullah Institute for Nano-Technology, King Saud University, PO Box 2454, Riyadh 11451 (Saudi Arabia)

    2014-03-31

    In this paper we outline the main quantum properties of the system of nano-based laser called Dipole Nano-Laser emphasizing mainly on its ability to produce coherent light and for different configurations such as different embedding materials and subjecting it to an external classical electric field.

  4. Biocompatibility and Toxicity of Nano biomaterials 2014

    Li, X.; Lee, S.Ch.; Zhang, Sh.; Akasaka, T.

    2014-01-01

    It is well known that nano materials have developed rapidly over the past few decades. Based on their unique physicochemical properties and special mechanical properties, nano materials have provided application possibility in many different fields. Currently, as nano biomaterials, they are widely used in various biomedical applications, such as drug delivery systems, tissue engineering, dental/bone implant, and biosensors. For example, nano biomaterials have been used in tissue engineering because of their satisfactory bioactivity, high mechanical properties, and large surface area to adsorb specific proteins. Many kinds of nano biomaterials are used to prepare composite scaffolds to get better biocompatibility and higher ability in repairing specific tissues. Several antibacterial metallic nano biomaterials are used to coat implant surfaces to improve the speed of healing fractures. In addition, lots of nano biomaterials have the potential to break the limitations of the traditional delivery systems. They can load larger amount of drugs and provide stable drug release for long time at the targeted sites, such as tumors. Moreover, they can combine with polymers to furnish simultaneous drug delivery systems with the controllable release rate. Besides these applications, more and more nano biomaterials show great potential to be applied as highly sensitive biosensors because they have higher ability in loading firmly or interacting completely with recognition aptamers.

  5. Applying online nano-UHPLC to proteomics

    Falkenby, Lasse Gaarde; Hørning, Ole; Ravnsborg, Christian

    Ultra High Performance Liquid Chromatography (UHPLC) pushes the limits of feasible column designs by allowing higher operational pressure. Migrating from nano-HPLC to nano-UHPLC and coupling directly to a mass spectrometer requires alterations to the setup to allow the increase in pressure. We...

  6. CZT nanoRAIDER_VFG Factsheet

    James, R. [Brookhaven National Lab. (BNL), Upton, NY (United States); Bolotnikov, A. E. [Brookhaven National Lab. (BNL), Upton, NY (United States); Cui, Yonggang [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-01-15

    Brookhaven National Laboratory (BNL) is working with FLIR System Inc., the manufacturer of the nanoRAIDER, to design a handheld device based on a position-sensitive virtual Frisch-grid (VFG) Cadmium-Zinc-Telluride (CdZnTe or CZT) detector array (with 1% or better energy resolution). The new device called nanoRAIDER VFG will be an improvement to the current nanoRAIDER, which is a compact gamma-ray detection instrument manufactured by FLIR Systems Inc. that employs relatively lower-performing CZT hemispheric detectors (i.e., 3%-FWHM CZT detectors). The nanoRAIDER will significantly improve the accuracy while maintaining similar efficiency, as compared to the nanoRAIDER, for in-field analysis of nuclear materials and detection of undeclared activities during inspections conducted by the International Atomic Energy Agency (IAEA). Since the nanoRAIDER is currently used by the IAEA as part of its Complementary Access toolkit, a relatively quick acceptance of the nanoRAIDER VFG for safeguards is anticipated. The nanoRAIDER VFG will help address several items listed in the IAEA’s Long-Term R&D Plan that could enhance the abilities to detect undeclared nuclear material and activities.

  7. Divergence and genetic variability among superior rubber tree genotypes Divergência e variabilidade genética de genótipos superiores de seringueira

    Lígia Regina Lima Gouvêa

    2010-02-01

    Full Text Available The objective of this work was to estimate the genetic variability and divergence among 22 superior rubber tree (Hevea sp. genotypes of the IAC 400 series. Univariate and multivariate analyses were performed using eight quantitative traits (descriptors, including yield. In the univariate analyses, the estimated parameters were: genetic and environmental variances; genetic and environmental coefficients of variation; and the variation index. The Mahalanobis generalized distance, the Tocher agglomerative method and canonical variables were used for the multivariate analyses. In the univariate analyses, variability was verified among the genotypes for all the variables evaluated. The Tocher method grouped the genotypes into 11 clusters of dissimilarity. The first four canonical variables explained 87.93% of the cumulative variation. The highest genetic variability was found in rubber yield-related traits, which contributed the most to the genetic divergence. The most divergent pairs of genotypes are suggested for crossbreeding. The genotypes evaluated are suitable for breeding and may be used to continue the IAC rubber tree breeding program.O objetivo deste trabalho foi estimar a divergência e a variabilidade genética entre 22 genótipos superiores de seringueira (Hevea sp. da série IAC 400. Análises univariadas e multivariadas foram realizadas com oito caracteres quantitativos (descritores, incluindo produtividade. Na análise univariada, os parâmetros estimados foram: variâncias genética e ambiental, coeficientes de variação genética e ambiental, e índice de variação. A distância generalizada de Mahalanobis, o método aglomerativo de Tocher e variáveis canônicas foram utilizados nas análises multivariadas. Nas análises univariadas, verificou-se variabilidade entre os genótipos para todas as variáveis avaliadas. O método de Tocher agrupou os genótipos em 11 grupos de dissimilaridade. As quatro primeiras variáveis can

  8. Gridded precipitation dataset for the Rhine basin made with the genRE interpolation method

    Osnabrugge, van B.; Uijlenhoet, R.

    2017-01-01

    A high resolution (1.2x1.2km) gridded precipitation dataset with hourly time step that covers the whole Rhine basin for the period 1997-2015. Made from gauge data with the genRE interpolation scheme. See "genRE: A method to extend gridded precipitation climatology datasets in near real-time for

  9. A 48-plex autosomal SNP GenPlex™ assay for human individualization and relationship testing

    Tomas Mas, Carmen; Børsting, Claus; Morling, Niels

    2012-01-01

    SNPs are being increasingly used by forensic laboratories. Different platforms have been developed for SNP typing. We describe the GenPlex™ HID system protocol, a new SNP-typing platform developed by Applied Biosystems where 48 of the 52 SNPforID SNPs and amelogenin are included. The GenPlex™ HID...

  10. The nano-BIon in nanostructure

    Sepehri, Alireza, E-mail: alireza.sepehri@uk.ac.ir [Nano Research Center of the Ferdowsi University, Mashhad (Iran, Islamic Republic of); Faculty of Physics, Shahid Bahonar University, P.O. Box 76175, Kerman (Iran, Islamic Republic of)

    2016-04-01

    Recently, some authors have considered the superconductivity in nano-cubes and shown that by decreasing the size of these systems, superconductivity order parameter increases. In this research, we show that the same result can be obtained in a nano-BIon which is a configuration of two layers of cuprates connected by an electronic tube. This tube is a channel for transporting energy and matter inside a superconductor and acts as a wormhole in this system. This wormhole-like-tube is formed by decreasing the separation distance between layers of nano-cuprate and enhancing the cooper hopping pairing between layers. We estimate the critical temperature of superconductor and find that it depends on the size of nano-BIon and coupling between atoms in a layer. Also, we observe that external magnetic field generates a new tube which causes losing the energy density of nano-BIon between two layers and decreasing critical temperature of superconductor.

  11. Issues in nano technologies for Australia

    Tegart, G.

    2007-01-01

    The Australian Government in late 2005 created a National Nano technology Taskforce that produced a paper, 'Options for a National Nano technology Strategy', in November last year. As an input to the National Nano technology Strategy Taskforce, in early 2006 the National Academies Forum was contracted by the Department of Industry, Tourism and Resources to produce a report Environmental, Social, Legal and Ethical Aspects of the Development of Nano technologies in Australia (which is available at www.naf.org.au/symposia). The report drew on the expertise of Fellows from the four academies in workshops in Melbourne and Sydney and from discussions with other experts, and expressed its outcomes as a set of opinions to assist in developing guidelines for a National Nano technology Strategy

  12. ANALISIS SEKUEN GEN GLUTATION PEROKSIDASE (GPX1 SEBAGAI DETEKSI STRES OKSIDATIF AKIBAT INFEKSI MYCOBACTERIUM TUBERCULOSIS

    Ari Yuniastuti

    2013-02-01

    Full Text Available Glutation merupakan antioksidan yang berperan dalam fungsi imun, dan diekspresikan secara genetik oleh urutan gen yang membentuk protein enzim Glutation Peroxidase (GPx1. Bila ekspresi gen berubah maka terjadi perubahan fungsi glutation dan kerentanan terhadap stress oksidatif. Metode yang digunakan adalah Kasus-kontrol. Sampel yang digunakan adalah sampel darah. Kelompok kasus adalah sampel darah pasien tuberkulosis paru sedangkan kelompok kontrol adalah sampel darah orang sehat. Pemeriksaan gen Glutation peroxidase (GPx1 menggunakan metode Polymerase Chain Reaction (PCR untuk melihat pita DNA pada pasien tuberkulosis par serta elektroforesis produk PCR-RFLP gen GPx1 kelompok sampel tuberkulosis. Hasil penelitian menunjukkan bahwa tidak terdapat hubungan yang bermakna antara polimorfisme gen GPx1 (p=0,365 pasein tuberkulois dengan individu sehat, sehingga tidak dapat digunakan sebagai alat deteksi kerentanan terhadap stress oksidatif pada pasien tuberkulosis. Perlu penelitian lanjutan yang menggunakan sampel lebih besar dan populasi etnik yang berbeda.

  13. Sistema inmune y genética: un abordaje diferente a la diversidad de anticuerpos.

    Matta Camacho, Nubia Estela

    2011-01-01

    RESUMEN Es común encontrar en los libros de inmunología o de genética un capítulo con el título de “sistema inmune y genética”, sin embargo su asociación se centra en cómo la generación de anticuerpos rompió el paradigma “un gen, una proteína”, pues en el caso de la producción de anticuerpos, un gen produce millones de proteínas. El sistema inmune tiene muchos vínculos con la genética y la herencia; esta asociación se da porque cualquier sustancia o compuesto que produzca un organi...

  14. Eustochomorpha Girault, Neotriadomerus gen. n., and Proarescon gen. n. (Hymenoptera, Mymaridae, early extant lineages in evolution of the family

    John T. Huber

    2017-06-01

    Full Text Available Eustochomorpha Girault, with one described species, E. haeckeli Girault, from Australia is redescribed. Neotriadomerus Huber, gen. n., is described, together with seven new species, all from Australia: N. burwelli Huber, sp. n., N. crassus Huber, sp. n., N. darlingi Huber, sp. n., N. gloriosus Huber, sp. n., N. longiovipositor Huber, sp. n., N. longissimus Huber, sp. n. (one of the largest species of Mymaridae, and N. powerae Huber, sp. n. Proarescon Huber, gen. n., is described for P. primitivum (Huber, comb. n., transferred from Borneomymar Huber, and P. similis Huber, sp. n., from Thailand. The previously unknown male of Borneomymar madagascar Huber is described and the genus is redescribed from critical point dried and slide mounted specimens. Triadomerini, stat. n., is proposed to include six genera: Borneomymar, Eustochomorpha and Neotriadomerus, and the Cretaceous Carpenteriana Yoshimoto, Macalpinia Yoshimoto and Triadomerus Yoshimoto. Aresconini is proposed to include five (possibly six genera: Arescon Enock, Kikiki Huber and Beardsley, Proarescon Huber and Tinkerbella Huber and Noyes, and the Cretaceous Myanmymar Huber and, tentatively, also Enneagmus Yoshimoto. The two tribes are proposed as being the earliest lineages in Mymaridae, with Neotriadomerus and Triadomerus being sister genera to the remaining extant and extinct genera, respectively.

  15. The battle of "nano" paclitaxel.

    Sofias, Alexandros Marios; Dunne, Michael; Storm, Gert; Allen, Christine

    2017-12-01

    Paclitaxel (PTX) is one of the three most widely used chemotherapeutic agents, together with doxorubicin and cisplatin, and is first or second line treatment for several types of cancers. In 2000, Taxol, the conventional formulation of PTX, became the best-selling cancer drug of all time with annual sales of 1.6 billion. In 2005, the introduction of the albumin-based formulation of PTX, known as Abraxane, ended Taxol's monopoly of the PTX market. Abraxane's ability to push the Taxol innovator and generic formulations aside attracted fierce competition amongst competitors worldwide to develop their own unique, new and improved formulation of PTX. At this time there are at least 18 companies focused on pre-clinical and/or clinical development of nano-formulations of PTX. These pharmaceutical companies are investing substantial capital to capture a share of the lucrative global PTX market. It is hoped that any formulation that dominates the market will result in tangible benefits to patients in terms of both survival and quality of life. Given all of this activity, here we address the question: Who is going to win the battle of "nano" paclitaxel? Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Nano Mechanical Machining Using AFM Probe

    Mostofa, Md. Golam

    Complex miniaturized components with high form accuracy will play key roles in the future development of many products, as they provide portability, disposability, lower material consumption in production, low power consumption during operation, lower sample requirements for testing, and higher heat transfer due to their very high surface-to-volume ratio. Given the high market demand for such micro and nano featured components, different manufacturing methods have been developed for their fabrication. Some of the common technologies in micro/nano fabrication are photolithography, electron beam lithography, X-ray lithography and other semiconductor processing techniques. Although these methods are capable of fabricating micro/nano structures with a resolution of less than a few nanometers, some of the shortcomings associated with these methods, such as high production costs for customized products, limited material choices, necessitate the development of other fabricating techniques. Micro/nano mechanical machining, such an atomic force microscope (AFM) probe based nano fabrication, has, therefore, been used to overcome some the major restrictions of the traditional processes. This technique removes material from the workpiece by engaging micro/nano size cutting tool (i.e. AFM probe) and is applicable on a wider range of materials compared to the photolithographic process. In spite of the unique benefits of nano mechanical machining, there are also some challenges with this technique, since the scale is reduced, such as size effects, burr formations, chip adhesions, fragility of tools and tool wear. Moreover, AFM based machining does not have any rotational movement, which makes fabrication of 3D features more difficult. Thus, vibration-assisted machining is introduced into AFM probe based nano mechanical machining to overcome the limitations associated with the conventional AFM probe based scratching method. Vibration-assisted machining reduced the cutting forces

  17. Laser nano-manufacturing: state of the art and challenges

    Li, L.; Hong, M.; Schmidt, M.; Zhong, M.; Mashe, A.; Huis in 't veld, A.J.; Kovalenko, V.

    2011-01-01

    This paper provides an overview of advances in laser based nano-manufacturing technologies including surface nano-structure manufacturing, production of nano materials (nanoparticles, nanotubes and nanowires) and 3D nano-structures manufacture through multiple layer additive techniques and

  18. [Preparation of nano-nacre artificial bone].

    Chen, Jian-ting; Tang, Yong-zhi; Zhang, Jian-gang; Wang, Jian-jun; Xiao, Ying

    2008-12-01

    To assess the improvements in the properties of nano-nacre artificial bone prepared on the basis of nacre/polylactide acid composite artificial bone and its potential for clinical use. The compound of nano-scale nacre powder and poly-D, L-lactide acid (PDLLA) was used to prepare the cylindrical hollow artificial bone, whose properties including raw material powder scale, pore size, porosity and biomechanical characteristics were compared with another artificial bone made of micron-scale nacre powder and PDLLA. Scanning electron microscope showed that the average particle size of the nano-nacre powder was 50.4-/+12.4 nm, and the average pore size of the artificial bone prepared using nano-nacre powder was 215.7-/+77.5 microm, as compared with the particle size of the micron-scale nacre powder of 5.0-/+3.0 microm and the pore size of the resultant artificial bone of 205.1-/+72.0 microm. The porosities of nano-nacre artificial bone and the micron-nacre artificial bone were (65.4-/+2.9)% and (53.4-/+2.2)%, respectively, and the two artificial bones had comparable compressive strength and Young's modulus, but the flexural strength of the nano-nacre artificial bone was lower than that of the micro-nacre artificial bone. The nano-nacre artificial bone allows better biodegradability and possesses appropriate pore size, porosity and biomechanical properties for use as a promising material in bone tissue engineering.

  19. Nano crystals for Electronic and Optoelectronic Applications

    Zhu, T.; Cloutier, S.G.; Ivanov, I; Knappenberger Jr, K.L.; Robel, I.; Zhang, F

    2012-01-01

    Electronic and optoelectronic devices, from computers and smart cell phones to solar cells, have become a part of our life. Currently, devices with featured circuits of 45 nm in size can be fabricated for commercial use. However, further development based on traditional semiconductor is hindered by the increasing thermal issues and the manufacturing cost. During the last decade, nano crystals have been widely adopted in various electronic and optoelectronic applications. They provide alternative options in terms of ease of processing, low cost, better flexibility, and superior electronic/optoelectronic properties. By taking advantage of solution-processing, self-assembly, and surface engineering, nano crystals could serve as new building blocks for low-cost manufacturing of flexible and large area devices. Tunable electronic structures combined with small exciton binding energy, high luminescence efficiency, and low thermal conductivity make nano crystals extremely attractive for FET, memory device, solar cell, solid-state lighting/display, photodetector, and lasing applications. Efforts to harness the nano crystal quantum tunability have led to the successful demonstration of many prototype devices, raising the public awareness to the wide range of solutions that nano technology can provide for an efficient energy economy. This special issue aims to provide the readers with the latest achievements of nano crystals in electronic and optoelectronic applications, including the synthesis and engineering of nano crystals towards the applications and the corresponding device fabrication, characterization and computer modeling.

  20. Phosphorylated nano-diamond/ Polyimide Nanocomposites

    Beyler-Çiǧil, Asli; Çakmakçi, Emrah; Kahraman, Memet Vezir

    2014-01-01

    In this study, a novel route to synthesize polyimide (PI)/phosphorylated nanodiamond films with improved thermal and mechanical properties was developed. Surface phosphorylation of nano-diamond was performed in dichloromethane. Phosphorylation dramatically enhanced the thermal stability of nano-diamond. Poly(amic acid) (PAA), which is the precursor of PI, was successfully synthesized with 3,3',4,4'-Benzophenonetetracarboxylic dianhydride (BTDA) and 4,4'-oxydianiline (4,4'-ODA) in the solution of N,N- dimethylformamide (DMF). Pure BTDA-ODA polyimide films and phosphorylated nanodiamond containing BTDA-ODA PI films were prepared. The PAA displayed good compatibility with phosphorylated nano-diamond. The morphology of the polyimide (PI)/phosphorylated nano-diamond was characterized by scanning electron microscopy (SEM). Chemical structure of polyimide and polyimide (PI)/phosphorylated nano-diamond was characterized by FTIR. SEM and FTIR results showed that the phosphorylated nano-diamond was successfully prepared. Thermal properties of the polyimide (PI)/phosphorylated nanodiamond was characterized by thermogravimetric analysis (TGA). TGA results showed that the thermal stability of (PI)/phosphorylated nano-diamond film was increased

  1. Accessing the nanostructural analysis network organisation (NANO)

    Hicks, R.; Ringer, S.

    2003-01-01

    Full text: As a Major National Research Facility (MNRF), NANO unites five Australian microscopy and microanalysis centres to form the peak Australian facility for nanometric analysis of the structure and chemistry of materials. NANO is headquartered at the Australian Key Centre for Microscopy and Microanalysis at the University of Sydney and involves the Centres for Microscopy and Microanalysis at the Universities of Queensland and Western Australia, the Electron Microscope Unit at the University of New South Wales and the Microanalytical Research Centre at the University of Melbourne. Together these major centres maintain a wide range of complementary instrumentation for the characterisation of nanostructure. NANO links them into a co-ordinated national facility with unified charges and booking systems. The facility will provide open access to a wide range of present and future partners involving local and international linkages. For this reason, NANO is designed to allow the incorporation of other groups as additional nodes. All Australian researchers are eligible to apply for support to use NANO through the Travel and Access Program (NANO-TAP), which will support basic travel and accommodation costs as well as instrument time. Access to the national grid may involve on-site presence at a particular node or remote telemicroscopy. Both passive (observation) and active (operation) modes of telemicroscopy are available. This presentation will address the NANO-TAP application procedure, the use of remote telemicroscopy and the formation of additional nodes. Copyright (2003) Australian Microbeam Analysis Society

  2. Els orígens de la tuberculosi

    Bueno i Torrens, David, 1965-

    2014-01-01

    La tuberculosi és una de les primeres malalties infeccioses de la història de la humanitat. Es dedueix del registre fòssil, per les empremtes que deixa en els ossos d"algunes de les persones que l"han patit. Tradicionalment s"ha assumit que la tuberculosi ve del bestiar boví, que la va transmetre per primer cop a les persones durant el neolític. Però l"anàlisi genètica dels bacteris causants d"aquesta malaltia en diversos indrets del món i de bacteris fòssils trobats en mòmies precolombines h...

  3. Commissioning and Performance Analysis of WhisperGen Stirling Engine

    Pradip, Prashant Kaliram

    Stirling engine based cogeneration systems have potential to reduce energy consumption and greenhouse gas emission, due to their high cogeneration efficiency and emission control due to steady external combustion. To date, most studies on this unit have focused on performance based on both experimentation and computer models, and lack experimental data for diversified operating ranges. This thesis starts with the commissioning of a WhisperGen Stirling engine with components and instrumentation to evaluate power and thermal performance of the system. Next, a parametric study on primary engine variables, including air, diesel, and coolant flowrate and temperature were carried out to further understand their effect on engine power and efficiency. Then, this trend was validated with the thermodynamic model developed for the energy analysis of a Stirling cycle. Finally, the energy balance of the Stirling engine was compared without and with heat recovery from the engine block and the combustion chamber exhaust.

  4. Festival du rire de Genève

    Staff Association

    2015-01-01

    Connaissez-vous le Festival du rire de Genève ? La deuxième édition aura lieu du 25 au 28 mars 2015 au Casino-Théâtre à Carouge. Côté programmation, Marc Donnet-Monay ouvre les festivités avant trois autres soirées de folie et d’humour que nous vous laissons le soin de découvrir dans le programme : http://www.rire-geneve.ch/#programme. Réduction de 30% sur l’achat de places pour les membres du personnel du CERN. Pour cela, il suffit de se rendre sur la billetterie en ligne de notre site : www.rire-geneve.ch et d’utiliser le code promotionnel. Contacter le secrétariat de l’Association du personnel (Staff.Association@cern.ch) pour connaitre ce code promotionnel.

  5. How Gen Y and Boomers will reshape your agenda.

    Hewlett, Sylvia Ann; Sherbin, Laura; Sumberg, Karen

    2009-01-01

    When it comes to workplace preferences, Generation Y workers closely resemble Baby Boomers. Because these two huge cohorts now coexist in the workforce, their shared values will hold sway in the companies that hire them. The authors, from the Center for Work-Life Policy, conducted two large-scale surveys that reveal those values. Gen Ys and Boomers are eager to contribute to positive social change, and they seek out workplaces where they can do that. They expect flexibility and the option to work remotely, but they also want to connect deeply with colleagues. They believe in employer loyalty but desire to embark on learning odysseys. Innovative firms are responding by crafting reward packages that benefit both generations of workers--and their employers.

  6. Developing new nuclear curricula for GEN IV needs

    Ghitescu, P.; Pavel, G.L.

    2014-01-01

    States who wish to start and develop a nuclear program must take into consideration a strong proven strategy for developing a sustainable program. A complete nuclear research program must include: a good national strategy and support on the topic; strong research laboratories supported by good personnel; education component to provide sustainable and qualified workforce; national/international interest from stakeholders and governments and a well informed society. New demonstrators are foreseen for the next period to be built in Europe and skilled supporting personnel is strongly needed. Current situation in nuclear higher education with perspective will be analysed. EURATOM strongly supports development of multidisciplinary co-operational projects in order to built such novel initiatives. An example of such program supported by European Commission, ARCADIA, will be given. The project is based on the cooperation of a large number of participants all over Europe and the main purpose is to develop a road-map for Gen IV reactor. (authors)

  7. The sale of National Power and PowerGen

    1992-06-01

    In March 1991, the Secretary of State for Energy sold approximately 60 per cent of the shares in National Power and PowerGen who generate most of the electricity produced in England and Wales. The Government's overriding objective was to complete the privatisation of the electricity industry during the lifetime of the Parliament. Within that overriding objective, the Department sought: to maximise net proceeds; to deepen share ownership among individuals; to achieve the overall recognition that the sale of the two companies had been a success; and to achieve a modest premium on the issue price following the state of share dealings. This report sets out the results of a National Audit Office examination of how far the Department achieved their objectives for the sale, and how they controlled its costs. (author)

  8. Genética de las epilepsias Genetics of epilepsy

    Gustavo A. Charria-Ortiz

    2007-01-01

    Full Text Available En años recientes se ha podido definir con gran exactitud la existencia de alteraciones genéticas específicas en una gran variedad de síndromes epilépticos tradicionales. Es decir, por vez primera se ha podido relacionar de manera contundente y predecible la presencia de alteraciones genómicas y/o proteómicas con síndromes epilépticos antes considerados como "idiopáticos". La gran mayoría de dichos defectos han sido encontrados en genes codificadores para canales iónicos y/o receptores de membrana, lo cual en cierto modo confirma la ya antes postulada relevancia que estas estructuras tienen en la actividad electroquímica espontánea neuronal cuyo desajuste conllevaría a ciertas formas de epilepsia. Esta revisión se centra en los aspectos genéticos y clínicos de dichas condiciones y alteraciones. También se revisarán brevemente los estudios más relevantes de la literatura médica según los cuales -aun a pesar de no haberse definido con la misma exactitud el tipo de anomalías etiológicas- puede tranquilamente inferirse el gran componente genético que parece subyacer a la etiología de las epilepsias. Por ultimo se enfatizará en que a pesar de dichos descubrimientos, su aplicación en la práctica clínica diaria aun es muy limitada, no solo por la relativa rareza de algunos de tales síndromes neurológicos sino también por la poca relevancia que hasta ahora ellos han tenido en el manejo médico rutinario de la mayoría de los pacientes. Las posibilidades inmediatas de tales avances -incluida la farmacogenómica-, así como los posibles conflictos éticos en que se podría incurrir serán también brevemente discutidos.In the last few years, the presence of specific genetic abnormalities leading to some of the classical epileptic syndromes has been clearly elucidated. This means that for the first time, it has become possible to create a strong relationship between the presence of specific genomic and/or proteomic

  9. JRC-IE's research of safety of Gen IV systems

    Tsige-Tamirat, H.; Ranguelova, V.; Feutterer, M.; Ammirabile, L.; Carlsson, J.; D'Agata, E.; Laurie, M.; Magallon, D.

    2010-01-01

    The Institute for Energy (IE), one of the seven scientific Institutes of the Joint Research Centre (JRC) of the European Commission, has the mission to provide scientific and technical support for the conception, development, implementation and monitoring of community policies related to energy. To accomplish its mission, IE performs research in the areas of renewable energies, safety and sustainability of nuclear energy for current and future reactor systems, energy technic/economic assessment, and security of energy supply. The Generation IV International Forum (GIF) is a cooperative international endeavour organized to carry out R and D needed to establish the feasibility and performance capabilities of the next generation nuclear energy systems and support the progress towards their realization. The EU, represented by EURATOM and with the JRC as implementing agent, is working together with other GIF partners to perform pre-competitive R and D on key technologies to be implemented in future nuclear systems. IE is engaged in experimental research, simulation and modeling, scientific, feasibility and engineering studies on innovative nuclear reactor systems needed to support the EURATOM contribution to GEN IV initiative, in particular in assessment of innovative fuels and materials, development of new reactor core concepts and safety solutions and knowledge management and preservation. IE's research activities on Generation IV reactor systems are focused on the assessment of the potential of such systems to meet long term EU energy needs with respect to economical advantages, enhanced safety, sustainability, and proliferation resistance. IE participates in international collaborations and has bilateral research cooperation both with European and non-European partners. This paper gives an overview of IE's current research activities on the Gen IV reactor systems related to safety. (authors)

  10. Big Bang à Genève - French version only

    2005-01-01

    C'est la dernière conférence du cycle organisé par la section de physique de l'Université de Genève à l'occasion de l'Année internationale de la physique. Pour le bouquet final, la section de physique a choisi le grand boum du Big Bang. Intitulée « Big Bang à Genève », la conférence donnée par Laurent Chevalier de l'institut français CEA Saclay évoquera les expériences qui se préparent au CERN avec le LHC. Leur but est de reproduire et d'analyser les conditions qui prévalaient à l'origine de l'Univers, juste après le Big Bang. L'exposé décrira de façon simple les techniques utilisées pour cette exploration, qui démarrera en 2007. Laurent Chevalier se demandera avec le public quels phénomènes nouveaux les physiciens espèrent découvrir dans ce monde inexploré. Comme les précédentes, la conférence débutera par une démonstration de détection de rayons cosmiques dans l'auditoire et l'utilisation de ces signaux pour créer une « musique cosmique », en collaboration avec le Pr...

  11. Environmental risk assessment of engineered nano-SiO2 , nano iron oxides, nano-CeO2 , nano-Al2 O3 , and quantum dots.

    Wang, Yan; Nowack, Bernd

    2018-05-01

    Many research studies have endeavored to investigate the ecotoxicological hazards of engineered nanomaterials (ENMs). However, little is known regarding the actual environmental risks of ENMs, combining both hazard and exposure data. The aim of the present study was to quantify the environmental risks for nano-Al 2 O 3 , nano-SiO 2 , nano iron oxides, nano-CeO 2 , and quantum dots by comparing the predicted environmental concentrations (PECs) with the predicted-no-effect concentrations (PNECs). The PEC values of these 5 ENMs in freshwaters in 2020 for northern Europe and southeastern Europe were taken from a published dynamic probabilistic material flow analysis model. The PNEC values were calculated using probabilistic species sensitivity distribution (SSD). The order of the PNEC values was quantum dots nano-CeO 2  nano iron oxides nano-Al 2 O 3  nano-SiO 2 . The risks posed by these 5 ENMs were demonstrated to be in the reverse order: nano-Al 2 O 3  > nano-SiO 2  > nano iron oxides > nano-CeO 2  > quantum dots. However, all risk characterization values are 4 to 8 orders of magnitude lower than 1, and no risk was therefore predicted for any of the investigated ENMs at the estimated release level in 2020. Compared to static models, the dynamic material flow model allowed us to use PEC values based on a more complex parameterization, considering a dynamic input over time and time-dependent release of ENMs. The probabilistic SSD approach makes it possible to include all available data to estimate hazards of ENMs by considering the whole range of variability between studies and material types. The risk-assessment approach is therefore able to handle the uncertainty and variability associated with the collected data. The results of the present study provide a scientific foundation for risk-based regulatory decisions of the investigated ENMs. Environ Toxicol Chem 2018;37:1387-1395. © 2018 SETAC. © 2018 SETAC.

  12. Nano-nutrition of chicken embryos

    Sawosz, Filip; Pineda, Lane Manalili; Hotowy, Anna

    2013-01-01

    It has been suggested that the quantity and quality of nutrients stored in the egg might not be optimal for the fast rate of chicken embryo development in modern broilers, and embryos could be supplemented with nutrients by in ovo injection. Recent experiments showed that in ovo feeding reduces...... broiler eggs was randomly divided into a Control group without injection and injected groups with hydrocolloids of Nano-Ag, ATP or a complex of Nano-Ag and ATP (Nano-Ag/ATP). The embryos were evaluated on day 20 of incubation. The results indicate that the application of ATP to chicken embryos increases...

  13. Micro Nano Replication Processes and Applications

    Kang, Shinill

    2012-01-01

    This book is an introduction to the fundamentals and processes for micro and nano molding for plastic components. In addition to the basics, the book covers applications details and examples. The book helps both students and professionals to understand and work with the growing tools of molding and uses for micro and nano-sized plastic parts.Provides a comprehensive presentation on fundamentals and practices of manufacturing for micro / nano sized plastics partsCovers a relatively new but fast-growing field that is impacting any industry using plastic parts in their products (electronics, tele

  14. VMESNIK ZA DALJINSKO VODENJE NANO-ROBOTA

    Kocmut, Silvester

    2015-01-01

    V diplomskem delu je predstavljen programski uporabniški vmesnik za vodenje realnega nano-robota. Uporabniški vmesnik omogoča neposredno krmiljenje nano-robota. Realni nano-robot ima pet translacijskih osi, omogoča tudi montažo prijemala. Osi delujejo na osnovi piezoelektričnih aktuatorjev. Izhod iz inkrementalnih dajalnikov nam da povratno informacijo o gibanju. Uporabniški vmesnik omogoča ročno vodenje preko navideznih gumbov za vseh pet osi ter vodenje preko ročne ure EZ430-Chronos. Krmilj...

  15. Nano controllers characterization under radiation

    Bezerra, F.; Barde, S.; Carayon, J.L.; Sarthou, M.

    1999-01-01

    4 commercial nano-controllers (PIC16LC84, PIC16C73A, PIC16C76 and ST62E25) from MICROCHIP and SGS-Thomson have been characterized under heavy-ions, protons and total dose. The preliminary results show that PIC16LC84 has to be banned from the selection because it can not sustain high cumulated dose (its Idd begins to shift at 6 krads) and that its E 2 PROM code memory is too sensitive to SEU (single event upset). The 3 PICs have been tested with heavy-ions, the results show that they are sensible to upsets and latch-up, nevertheless no latch-up has been observed under proton irradiation. The sensitivity to latch-up does not matter a lot because PICs consume very little and it is planned to implement them in a tolerant design. (A.C.)

  16. Intelligent micro reactors. ''Nano firms''

    Pileni, M.P.; CEA Centre d'Etudes de Saclay, 91 - Gif-sur-Yvette

    1998-01-01

    A new synthesis method of CdS has been carried out. It is based on the use of inverse micellar systems. These micellae have an important property which is used here: when two droplets collide, they can join during a short moment and divide again, creating two new droplets identical to the first ones but which have indeed mixed their respective contents. The mixture of two inverse micellae (each containing a reagent) can lead to a chemical reaction, reduction or co-precipitation. Semi-conductor crystals of CdS have thus been synthesized. They are nano crystals. Their size is indeed limited because the droplets size limit the crystals growth which stabilize and stay inside the droplet. (O.M.)

  17. Fabrication of high-aspect-ratio nano structures using a nano x-ray shadow mask

    Kim, Yong Chul; Lee, Seung S

    2008-01-01

    This paper describes a novel method for the fabrication of high-aspect-ratio nano structures (HAR-nano structures) using a nano x-ray shadow mask and deep x-ray lithography (DXRL). The nano x-ray shadow mask is fabricated by depositing an x-ray absorber layer (Au, 3 µm) onto the back side of a nano shadow mask. The nano shadow mask is produced with nano-sized apertures whose dimensions are reduced to several tens of nanometers by the accumulation of low-stress silicon nitride (Si x N y ) using the LPCVD process on the shadow mask. A shadow mask containing apertures with a size of 1 µm is fabricated on a bulk micromachined Si x N y membrane. The thickness of an absorber layer must be in the range of several tens of micrometers in order to obtain a contrast of more than 100 for the conventional DXRL process at the Pohang Light Source (PLS). However, a 3 µm thick absorber layer can provide a sufficient contrast if the modified DXRL of the central beam-stop method is used, which blocks high-energy x-rays. A nano shadow mask with 30 nm sized apertures is fabricated and a nano x-ray shadow mask with 250 nm sized apertures is fabricated by depositing a 3 µm thick absorber layer on a nano shadow mask with 500 nm sized apertures. HAR-nano structures (circles with a diameter of 420 nm and lines with a width of 274 nm) with aspect ratios of over 10:1 on a 3.2 µm SU-8 are successfully fabricated by using the nano x-ray shadow mask and the central beam-stop method

  18. Application of emission CT on nano-robot radiation imaging tracing and isotope sign in nano-robot

    Wang Xuewu; Cheng Jianping; Kang Kejun

    2000-01-01

    Nano-technology has been a scientific and technical frontier with major trends foreseen in several disciplines. Nano-robot is the most remarkable imagination of the application of nano-technology. And it should be concerned of tracing technology along with nano-robot. The character of nano-robot is deeply analyzed, the development status of emission CT is integrated, and the application of emission CT on nano-robot radiation imaging tracing is discussed. The isotope sign of nano-robot is especially calculated and analyzed

  19. BACTERICIDE IMPACT OF POLYMER-STABILIZED MULTI-FUNCTIONAL NANO-COMPOSITES

    Graskova I.A.

    2012-08-01

    Full Text Available Synthesis on the basis of natural matrices in order to acquire products with the desired properties is one of the promising trends of modern science. Using polysaccharides as a matrix allowed to generate derivatives with diverse structures and new properties. Growing interest towards anti-microbe effect of selenium-containing nano-composites is induced by the phenomenon of antibiotic-resistance of contemporary pathogenic microorganisms.Clavibacter genus bacteria are the most significant and widely spread among gram-positive bacteria. Bacteria cells are static pleimorphous rods, normally singular, sometimes coupled or joined in short chains, strict anaerobes in need of certain growth factors, non-sporogenous. Clavibacter michiganensis subsp. sepedonicus cause potato ring rot. At the tuber slice the damage is shaped as a ring; growing bacteria are accumulated in the conducting vessels causing their occlusion and therefore gradual withering of leaves and stem. This disease is distributed at all the continents including Australia. Harvest loss through ring rot damage may reach 10-45%.Our work was aimed at the study of complex interaction between microbe cultivar and selenium-based nanocomposites. Bacterial strain Аs1405 was acquired from the All-Russia collection of microorganisms, IMBP RAS. This genus is not included in the classification of pathogenic microorganisms by pathogenic groups of Sanitary-Epidemiological Rules SP 1.3.2322-08. The present study was focused on characteristics of the acquired strain.Fluorescent and electronic-scanning microscope was used to acquire photographs of bacterial cells. Pathogen was identified by PCR-analysis, which confirmed the presence of DNA of desired size. The extracted DNA was sequenced with the sequenced sequence added to Gen Bank under the number HQ394204. Cellulolytic and phytotoxic activity of this strain was determined.Chemistry Institute named A.E. Favorsky provided water-soluble nano

  20. AC dielectrophoresis alignment of single-walled carbon nano tubes (SWNTS) and palladium nano wires for hydrogen gas sensor

    Nur Ubaidah Saidin; Nur Ubaidah Saidin; Ying, K.K.; KKhuan, N.I.; Mohammad Hafizuddin Jumali

    2013-01-01

    Full-text: Using AC electric field, nano wires or nano tubes can be aligned, chained or accelerated in a direction parallel to the applied field, oriented or concentrated onto designated locations as well as dispersed in controlled manner under high efficiencies. In this work, systematic study on the alignment of nano wires/ nano tubes across the 3 μm-gaps between pairs of micro fabricated gold electrodes was carried out using AC dielectrophoresis technique. Densities and alignment of the nano wires/ nano tubes across the gaps of the electrodes were controlled by the applied AC field strengths and frequencies on the electrodes. Good alignments of SWNTs and Pd nano wires were achieved at an applied frequency of 5 MHz and a field strength as high as 25 V pp for Pd nano wires compared to only 2 V pp for SWNTs. The aligned nano wires/ nano tubes will be functioned as sensor elements for hydrogen gas sensing. (author)

  1. Nano medicine in Action: An Overview of Cancer Nano medicine on the Market and in Clinical Trials

    Wang, R.; Billone, P.S.; Mullett, W.M.

    2013-01-01

    Nano medicine, defined as the application of nano technology in the medical field, has the potential to significantly change the course of diagnostics and treatment of life-threatening diseases, such as cancer. In comparison with traditional cancer diagnostics and therapy, cancer nano medicine provides sensitive cancer detection and/or enhances treatment efficacy with significantly minimized adverse effects associated with standard therapeutics. Cancer nano medicine has been increasingly applied in areas including nano drug delivery systems, nano pharmaceuticals, and nano analytical contrast reagents in laboratory and animal model research. In recent years, the successful introduction of several novel nano medicine products into clinical trials and even onto the commercial market has shown successful outcomes of fundamental research into clinics. This paper is intended to examine several nano medicines for cancer therapeutics and/or diagnostics-related applications, to analyze the trend of nano medicine development, future opportunities, and challenges of this fast-growing area.

  2. Indentation analysis of nano-particle using nano-contact mechanics models during nano-manipulation based on atomic force microscopy

    Daeinabi, Khadijeh; Korayem, Moharam Habibnejad

    2011-01-01

    Atomic force microscopy is applied to measure intermolecular forces and mechanical properties of materials, nano-particle manipulation, surface scanning and imaging with atomic accuracy in the nano-world. During nano-manipulation process, contact forces cause indentation in contact area between nano-particle and tip/substrate which is considerable at nano-scale and affects the nano-manipulation process. Several nano-contact mechanics models such as Hertz, Derjaguin–Muller–Toporov (DMT), Johnson–Kendall–Roberts–Sperling (JKRS), Burnham–Colton–Pollock (BCP), Maugis–Dugdale (MD), Carpick–Ogletree–Salmeron (COS), Pietrement–Troyon (PT), and Sun et al. have been applied as the continuum mechanics approaches at nano-scale. In this article, indentation depth and contact radius between tip and substrate with nano-particle for both spherical and conical tip shape during nano-manipulation process are analyzed and compared by applying theoretical, semiempirical, and empirical nano-contact mechanics models. The effects of adhesion force, as the main contrast point in different nano-contact mechanics models, on nano-manipulation analysis is investigated for different contact radius, and the critical point is discussed for mentioned models.

  3. Description of Sharon gen. nov. for the Chilean species Asaphes amoenus Philippi, 1861 (Coleoptera: Elateridae

    Elizabeth T. Arias-Bohart

    2015-10-01

    Full Text Available Sharon gen. nov. is here described to include Asaphes? amoenus Philippi, 1861 comb. nov. from Chile. A redescription of the species is based on the female holotype and material from different geographic locations. Candèze (1891 placed Asaphes amoenus and Parasaphes elegans in the suprageneric group Asaphites. We discuss differences between Sharon gen. nov. and Hemicrepidius Germar, 1839, where Asaphes amoenus was later placed by Blackwelder (1944. Based on morphological characters, Sharon gen. nov. appears to be related to Parasaphes Candèze, 1881, Wynarka Calder, 1986, and Tasmanelater Calder, 1996, all from Australia, suggesting Gondwanan relationships.

  4. Estudio de la variabilidad genética en camélidos bolivianos

    Barreta Pinto, Julia

    2013-01-01

    El estudio de los camélidos sudamericanos es de gran interés en los países andinoscomo Perú, Bolivia, Chile, Argentina, debido a su importante valor económico y suimportancia en el mantenimiento y desarrollo de las poblaciones rurales en dichos países. Dada la falta de estudios genéticos centrados en las poblaciones de camélidos quehabitan en Bolivia, y la necesidad de realizar una valoración de la diversidad genética deestas poblaciones, la presente Tesis doctoral ha abordado el estudio gené...

  5. Consideraciones genéticas sobre las dislipidemias y la aterosclerosis

    Julio César Fernández Travieso

    2008-01-01

    La interacción entre factores genéticos y ambientales explican muchos aspectos de la aterosclerosis y las variaciones genéticas constituyen marcadores de riesgo de la enfermedad coronaria (EC), la cual ocupa el primer lugar entre las causas de morbilidad y mortalidad a nivel mundial. La predisposición familiar a padecer EC, junto al avance vertiginoso en técnicas de análisis de ADN y la disponibilidad de secuencias del genoma humano, han orientado la investigación de alteraciones genéticas re...

  6. Conceptos básicos de programación genética

    José Jesús Martínez Páez

    2001-04-01

    Full Text Available La Programación Genética, PG, es un retoño de los Algoritmos Genéticos, en la cual los cromosomas que sufren la adaptación son en sí mismos programas de computador. Se usan operadores genéticos  especializados que generalizan la recombinación sexual y la mutación, para los programas de computador estructurados en árbol que están bajo adaptación.

  7. Manipulación genética de seres humanos

    Manuel Santos Alcántara

    2006-01-01

    El gran avance que ha tenido la Genética en los últimos años y, particularmente, aquello relacionado con el desciframiento del genoma humano, ha traído a la discusión pública la posibilidad concreta de manipular genéticamente a los seres humanos. El mejoramiento o perfeccionamiento genético de los seres humanos, denominado eugenesia, actualmente se ha convertido técnicamente en una realidad, motivando una profunda reflexión de tipo ético. La pregunta básica es la siguiente: aquello que es téc...

  8. Polimorfismos del gen ob en bovinos de raza holstein en la Comarca Lagunera, México

    Sarai S. Mendoza-Retana; Miguel A. Gallegos-Robles; Uriel González-Salas; José L. García-Hernández; Manuel Fortis-Hernández; Cirilo Vázquez-Vázquez; Héctor I. Trejo-Escareño

    2017-01-01

    La Comarca Lagunera es la cuenca lechera más importante de México. En la actualidad se están utilizando diversas técnicas que permiten evaluar genéticamente el animal a una edad temprana, permitiendo seleccionar futuros reproductores con características deseables. Entre los genes relacionados con la producción de leche, se encuentran el gen Ob también llamado gen Leptina el cual actúa sobre el sistema nervioso central y tejidos periféricos jugando un papel muy importante ...

  9. High performance nano-composite technology development

    Kim, Whung Whoe; Rhee, C. K.; Kim, S. J.; Park, S. D. [KAERI, Taejon (Korea, Republic of); Kim, E. K.; Jung, S. Y.; Ryu, H. J. [KRICT, Taejon (Korea, Republic of); Hwang, S. S.; Kim, J. K.; Hong, S. M. [KIST, Taejon (Korea, Republic of); Chea, Y. B. [KIGAM, Taejon (Korea, Republic of); Choi, C. H.; Kim, S. D. [ATS, Taejon (Korea, Republic of); Cho, B. G.; Lee, S. H. [HGREC, Taejon (Korea, Republic of)

    1999-06-15

    The trend of new material development are being to carried out not only high performance but also environmental attraction. Especially nano composite material which enhances the functional properties of components, extending the component life resulting to reduced the wastes and environmental contamination, has a great effect on various industrial area. The application of nano composite, depends on the polymer matrix and filler materials, has various application from semiconductor to medical field. In spite of nano composite merits, nano composite study are confined to a few special materials as a lab, scale because a few technical difficulties are still on hold. Therefore, the purpose of this study establishes the systematical planning to carried out the next generation projects on order to compete with other countries and overcome the protective policy of advanced countries with grasping over sea's development trends and our present status. (author).

  10. Handbook of nano-optics and nanophotonics

    2013-01-01

    In the 1990s, optical technology and photonics industry developed fast, but further progress became difficult due to a fundamental limit of light known as the diffraction limit. This limit could be overcome using the novel technology of nano-optics or nanophotonics in which the size of the electromagnetic field is decreased down to the nanoscale and is used as a carrier for signal transmission, processing, and fabrication. Such a decrease beyond the diffraction limit is possible by using optical near-fields. The true nature of nano-optics and nanophotonics involves not only their abilities to meet the above requirements but also their abilities to realize qualitative innovations in photonic devices, fabrication techniques, energy conversion and information processing systems. The objective of this work is to review the innovations of optical science and technology by nano-optics and nanophotonics. While in conventional optical science and technology, light and matter are discussed separately, in nano-optics a...

  11. Nano Approaches to Modulate Host Cell Response

    The Carolina Center of Cancer Nanotechnology Excellence (CCNE) is an NCI-funded multidisciplinary collaboration among a range of disciplines using nano approaches for cancer disease management and treatment.

  12. Energy challenge and nano-sciences

    Romulus, Anne-Marie; Chamelot, Pierre; Chaudret, Bruno; Comtat, Maurice; Fajerwerg, Katia; Philippot, Karine; Geoffron, Patrice; Lacroix, Jean-Christophe; Abanades, Stephane; Flamant, Gilles; HUERTA-ORTEGA, Benjamin; Cezac, Pierre; Lincot, Daniel; Roncali, Jean; Artero, Vincent; GuiLLET, Nicolas; Fauvarque, Jean-Francois; Simon, Patrice; Taberna, Pierre-Louis

    2013-01-01

    This book first describes the role of energy in the development of nano-sciences, discusses energy needs, the perception of nano-sciences by societies as far as the energy challenge is concerned, describes the contribution of nano-catalyzers to energy and how these catalyzers are prepared. A second part addresses the new perspectives regarding carbon: production of biofuels from biomass, process involved in CO 2 geological storage, improvement of solar fuel production with the use of nano-powders. The third part describes the new orientations of solar energy: contribution of the thin-layer inorganic sector to photovoltaic conversion, perspectives for organic photovoltaic cells, operation of new dye-sensitized nanocrystalline solar cells. The fourth part addresses the hydrogen sector: credibility, contribution of biomass in hydrogen production, production of hydrogen by electrochemistry, new catalyzers for electrolyzers and fuel cells. The last part address improved electrochemical reactors

  13. DyNano-2010, Book of abstracts

    Bjoemeholm, O.; Boutu, W.; Gauthier, D.; Xunyou, Ge; Xiaochi, Liu; Carre, B.; Merdji, H.; Winkler, M.; Harnes, J.; Saethre, L.J.; Boerve, K.J.

    2012-01-01

    The amazing progresses made in the recent years by the instrumentation in terms of spectral brightness of the X-ray sources (new synchrotron radiation facilities, X-ray Free Electron Lasers etc.), detection schemes (multi-channel analysis due to intensive use of position sensitive detectors, time-resolved techniques etc.) and production sources of clusters (pure and mixed, atomic and molecular clusters) and nano-particles permit nowadays highly accurate spectroscopic studies of more and more complex objects. There were dedicated sessions on the following topics: 1) recent progress in Nano-object's investigations, 2) synchrotron radiation based spectroscopic investigations of clusters and nano-particles, 3) Structure and properties of size-selected clusters, 4) electronic and nuclear decay of clusters, 5) new insights in structure and dynamics of complex species, and 6) clusters and nano-particles and new light sources. This document gathers only the abstracts of the papers

  14. MEMS and Nano-Technology Clean Room

    Federal Laboratory Consortium — The MEMS and Nano-Technology Clean Room is a state-of-the-art, 800 square foot, Class 1000-capable facility used for development of micro and sub-micro scale sensors...

  15. Generation and characterization of nano aluminium powder ...

    TECS

    Generation and characterization of nano aluminium powder obtained through wire ... Department of Aerospace Engineering, Indian Institute of Technology. Madras, Chennai 600 .... pressure developed due to current flow (z-Pinch). Figure 2.

  16. Hydrogen Storage in Carbon Nano-materials

    David Eyler; Michel Junker; Emanuelle Breysse Carraboeuf; Laurent Allidieres; David Guichardot; Fabien Roy; Isabelle Verdier; Edward Mc Rae; Moulay Rachid Babaa; Gilles Flamant; David Luxembourg; Daniel Laplaze; Patrick Achard; Sandrine Berthon-Fabry; David Langohr; Laurent Fulcheri

    2006-01-01

    This paper presents the results of a French project related to hydrogen storage in carbon nano-materials. This 3 years project, co-funded by the ADEME (French Agency for the Environment and the Energy Management), aimed to assess the hydrogen storage capacity of carbon nano-materials. Four different carbon materials were synthesized and characterized in the frame of present project: - Carbon Nano-tubes; - Carbon Nano-fibres; - Carbon Aerogel; - Carbon Black. All materials tested in the frame of this project present a hydrogen uptake of less than 1 wt% (-20 C to 20 C). A state of the art of hydrogen storage systems has been done in order to determine the research trends and the maturity of the different technologies. The choice and design of hydrogen storage systems regarding fuel cell specifications has also been studied. (authors)

  17. Influence of Nano Silica on Alkyd Films

    Nikolic, Miroslav

    . The present work centers on the reinforcement of alkyd binders emulsified in water and used in exterior wood coatings with nano silica. Raman spectroscopy was used throughout the study to maintain the reproducibility of results as it was found that colloidal nano silica can increase or decrease the speed...... of alkyd curing affecting the tested mechanical properties. Hydrophilic, colloidal nano silica was seen to have limited effect in improving the mechanical properties due to problems in properly dispersing and attaining good surface interactions with the hydrophobic alkyd polymer. Efforts in increasing...... the interactions with the alkyd polymer while keeping the nano filler stable in the water phase did not show further improvements of mechanical properties. The best results in respect to mechanical properties, as measured under static and dynamic loading, were obtained with the use of hexamethyldisilazane treated...

  18. Micro and nano lasers for digital photonics

    Hill, M.T.; Oei, Y.S.; Zhu, Y.C.; Smit, M.K.

    2007-01-01

    The small size, low-power and high-speed of nano-lasers make them an attractive nonlinear element for digital photonics. Further miniaturization of lasers below the diffraction limit is required before digital photonics can compete with electronics.

  19. High performance nano-composite technology development

    Kim, Whung Whoe; Rhee, C. K.; Kim, S. J.; Park, S. D. [KAERI, Taejon (Korea, Republic of); Kim, E. K.; Jung, S. Y.; Ryu, H. J. [KRICT, Taejon (Korea, Republic of); Hwang, S. S.; Kim, J. K.; Hong, S. M. [KIST, Taejon (Korea, Republic of); Chea, Y. B. [KIGAM, Taejon (Korea, Republic of); Choi, C. H.; Kim, S. D. [ATS, Taejon (Korea, Republic of); Cho, B. G.; Lee, S. H. [HGREC, Taejon (Korea, Republic of)

    1999-06-15

    The trend of new material development are being to carried out not only high performance but also environmental attraction. Especially nano composite material which enhances the functional properties of components, extending the component life resulting to reduced the wastes and environmental contamination, has a great effect on various industrial area. The application of nano composite, depends on the polymer matrix and filler materials, has various application from semiconductor to medical field. In spite of nano composite merits, nano composite study are confined to a few special materials as a lab, scale because a few technical difficulties are still on hold. Therefore, the purpose of this study establishes the systematical planning to carried out the next generation projects on order to compete with other countries and overcome the protective policy of advanced countries with grasping over sea's development trends and our present status. (author).

  20. High performance nano-composite technology development

    Kim, Whung Whoe; Rhee, C. K.; Kim, S. J.; Park, S. D.; Kim, E. K.; Jung, S. Y.; Ryu, H. J.; Hwang, S. S.; Kim, J. K.; Hong, S. M.; Chea, Y. B.; Choi, C. H.; Kim, S. D.; Cho, B. G.; Lee, S. H.

    1999-06-01

    The trend of new material development are being to carried out not only high performance but also environmental attraction. Especially nano composite material which enhances the functional properties of components, extending the component life resulting to reduced the wastes and environmental contamination, has a great effect on various industrial area. The application of nano composite, depends on the polymer matrix and filler materials, has various application from semiconductor to medical field. In spite of nano composite merits, nano composite study are confined to a few special materials as a lab, scale because a few technical difficulties are still on hold. Therefore, the purpose of this study establishes the systematical planning to carried out the next generation projects on order to compete with other countries and overcome the protective policy of advanced countries with grasping over sea's development trends and our present status. (author).

  1. Nano cobalt oxides for photocatalytic hydrogen production

    Mangrulkar, Priti A.; Joshi, Meenal M.; Tijare, Saumitra N.; Polshettiwar, Vivek; Labhsetwar, Nitin K.; Rayalu, Sadhana Suresh

    2012-01-01

    of various operating parameters in hydrogen generation by nano cobalt oxide was then studied in detail. Copyright © 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

  2. Managing collaboration in the nanoManipulator

    Hudson, Thomas C.; Heiser, Aron T.; Sonnenwald, Diane H.

    2003-01-01

    We designed, developed, deployed, and evaluated the Collaborative nanoManipulator (CnM), a system supporting remote collaboration between users of the nanoManipulator interface to atomic force microscopes. To be accepted by users, the shared nanoManipulator application had to have the same high...... level of interactivity as the single user system and the application had to support a user's ability to interleave working privately and working collaboratively. This paper briefly describes the entire collaboration system, but focuses on the shared nanoManipulator application. Based on our experience...... developing the CnM, we present: a method of analyzing applications to characterize the requirements for sharing data between collaborating sites, examples of data structures that support collaboration, and guidelines for selecting appropriate synchronization and concurrency control schemes....

  3. Green chemistry by nano-catalysis

    Polshettiwar, Vivek

    2010-01-01

    Nano-materials are important in many diverse areas, from basic research to various applications in electronics, biochemical sensors, catalysis and energy. They have emerged as sustainable alternatives to conventional materials, as robust high surface area heterogeneous catalysts and catalyst supports. The nano-sized particles increase the exposed surface area of the active component of the catalyst, thereby enhancing the contact between reactants and catalyst dramatically and mimicking the homogeneous catalysts. This review focuses on the use of nano-catalysis for green chemistry development including the strategy of using microwave heating with nano-catalysis in benign aqueous reaction media which offers an extraordinary synergistic effect with greater potential than these three components in isolation. To illustrate the proof-of-concept of this "green and sustainable" approach, representative examples are discussed in this article. © 2010 The Royal Society of Chemistry.

  4. Synthesis, Characterization and Application of Nano Lepidocrocite ...

    NICO

    Degradation of halogenated organic compounds using nanoparticles is one of the innovative ... way as the synthesis of nano zero-valent iron by using sodium .... +. −. 2и High. 2и Low. FWHM. Crystallite. /counts. /counts. /degree. /degree.

  5. Discusión: Explicaciones genéticas y psicológicas de la esquizofrenia.Genética de la esperanza

    Silvio Bolaños-Salvatierra

    2003-01-01

    Full Text Available En este documento se rebaten críticas hechas por Raventós y Jensen al artículo “Genética y comportamiento”. Cuatro temas fueron seleccionados: 1 se determina que los antipsicóticos aparecieron veinte años después de la concepción hereditaria de la esquizofrenia; 2 se considera que la discusión es altamente pertinente, para nada bizantina o irrelevante, debido que persisten prácticas epistémicas riesgosas en los investigadores genético-conductuales; 3 aunque ninguna conducta humana está exenta de influencia constitucional, el enfoque biologicista se ha propasado al pretender explicar genéticamente casi todo, desconfirmando solapadamente la importancia de la historia personal; y, 4 se plantea que la investigación biológica sobrevalora el peso de las anomalías genéticas frente a la historia social, por lo que solo aparenta cautela. Se propone investigar genéticamente la esperanza con el objetivo de saturar a la humanidad con ese tipo de explicaciones, para alcanzar más rápido una convivencia basada en la tolerancia y el respeto.

  6. Nano-tribology and materials in MEMS

    Satyanarayana, N; Lim, Seh

    2013-01-01

    This book brings together recent developments in the areas of MEMS tribology, novel lubricants and coatings for nanotechnological applications, biomimetics in tribology and fundamentals of micro/nano-tribology. Tribology plays important roles in the functioning and durability of machines at small length scales because of the problems associated with strong surface adhesion, friction, wear etc. Recently, a number of studies have been conducted to understand tribological phenomena at nano/micro scales and many new tribological solutions for MEMS have been proposed.

  7. Nano structural anodes for radiation detectors

    Cordaro, Joseph V.; Serkiz, Steven M.; McWhorter, Christopher S.; Sexton, Lindsay T.; Retterer, Scott T.

    2015-07-07

    Anodes for proportional radiation counters and a process of making the anodes is provided. The nano-sized anodes when present within an anode array provide: significantly higher detection efficiencies due to the inherently higher electric field, are amenable to miniaturization, have low power requirements, and exhibit a small electromagnetic field signal. The nano-sized anodes with the incorporation of neutron absorbing elements (e.g., .sup.10B) allow the use of neutron detectors that do not use .sup.3He.

  8. The nano-materials, at the heart of the nano galaxy; Les nano-materiaux, au coeur de la galaxie nano

    Le Marois, G. [Direction Generale de l' Industrie, des Technologies de l' Information et des Postes, 75 - Paris (France); Carlac, D. [Societe Developpement et Conseil, 51 - Reims (France)

    2004-02-01

    The researches on nano-materials are continuously increasing in most of industrialized countries. Between 1998 and 2003, the corresponding investment has been multiplied by six in Europe, eight in Usa and in Japan, to reach 3 milliards of euros in the world. Based on the nano-technologies development, these materials would represent the main part of the market at short and middle dated. Many examples of utilization are presented. (A.L.B.)

  9. Oxide nano crystals for in vivo imaging

    Heinrich, E.

    2005-01-01

    For small animal, fluorescence imaging is complementary with other techniques such as nuclear imaging (PET, SPECT). In vivo imaging studies imply the development of new luminescent probes, with a better sensitivity and a better biological targeting. These markers must filled biological and optical conditions. Our goal is to study new doped lanthanides oxide nano-crystals, their properties, their functionalization and their ability to target biological molecules. Characterizations of Y 2 O 3 :Eu and Y 2 SiO 5 :Eu nano-crystals (light diffusion, spectrometry, microscopy) allowed the determination of their size, their fluorescence properties but also their photo-bleaching. Means of stabilization of the nanoparticles were also studied in order to decrease their aggregation. Gd 2 O 3 :Eu nano-crystals were as well excited by X rays. Nano-crystals of Y 2 SiO 5 :Eu were functionalized, and organic ligands grafting evidenced by fluorescence and NMR. The functionalized nano-crystals could then recognized biological targets (streptavidin-biotin) and be incubated in the presence of HeLa cells. This report deals with the properties of these nano-crystals and their ability to meet the optical and biological conditions required for the application of in vivo imaging. (author)

  10. Development of nano SiO2 incorporated nano zinc phosphate coatings on mild steel

    Tamilselvi, M.; Kamaraj, P.; Arthanareeswari, M.; Devikala, S.; Selvi, J. Arockia

    2015-01-01

    Highlights: • Nano SiO 2 incorporated nano zinc phosphate coating on mild steel was developed. • Coatings showed enhanced corrosion resistance. • The nano SiO 2 is adsorbed on mild steel surface and become nucleation sites. • The nano SiO 2 accelerates the phosphating process. - Abstract: This paper reports the development of nano SiO 2 incorporated nano zinc phosphate coatings on mild steel at low temperature for achieving better corrosion protection. A new formulation of phosphating bath at low temperature with nano SiO 2 was attempted to explore the possibilities of development of nano zinc phosphate coatings on mild steel with improved corrosion resistance. The coatings developed were studied by Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray Spectroscopy (EDX), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and Electrochemical measurements. Significant variation in the coating weight, morphology and corrosion resistance was observed as nano SiO 2 concentrations varied from 0.5–4 g/L. The results showed that, the nano SiO 2 in the phosphating solution changed the initial potential of the interface between mild steel substrate and phosphating solution and reduce the activation energy of the phosphating process, increase the nucleation sites and yielded zinc phosphate coatings of higher coating weight, greater surface coverage and enhanced corrosion resistance. Better corrosion resistance was observed for coatings derived from phosphating bath containing 1.5 g/L nano SiO 2 . The new formulation reported in the present study was free from Ni or Mn salts and had very low concentration of sodium nitrite (0.4 g/L) as accelerator

  11. Characterization of Romboutsia ilealis gen. nov., sp. nov., isolated from the gastro-intestinal tract of a rat, and proposal for the reclassification of five closely related members of the genus Clostridium into the genera Romboutsia gen. nov., Intestinibacter gen. nov., Terrisporobacter gen. nov. and Asaccharospora gen. nov.

    Gerritsen, Jacoline; Fuentes, Susana; Grievink, Wieke; van Niftrik, Laura; Tindall, Brian J; Timmerman, Harro M; Rijkers, Ger T; Smidt, Hauke

    2014-05-01

    A Gram-positive staining, rod-shaped, non-motile, spore-forming obligately anaerobic bacterium, designated CRIBT, was isolated from the gastro-intestinal tract of a rat and characterized. The major cellular fatty acids of strain CRIBT were saturated and unsaturated straight-chain C12-C19 fatty acids, with C16:0 being the predominant fatty acid. The polar lipid profile comprised six glycolipids, four phospholipids and one lipid that did not stain with any of the specific spray reagents used. The only quinone was MK-6. The predominating cell-wall sugars were glucose and galactose. The peptidoglycan type of strain CRIBT was A1σ lanthionine-direct. The genomic DNA G+C content of strain CRIBT was 28.1 mol%. On the basis of 16S rRNA gene sequence similarity, strain CRIBT was most closely related to a number of species of the genus Clostridium, including Clostridium lituseburense (97.2%), Clostridium glycolicum (96.2%), Clostridium mayombei (96.2%), Clostridium bartlettii (96.0%) and Clostridium irregulare (95.5%). All these species show very low 16S rRNA gene sequence similarity (genus Clostridium. DNA-DNA hybridization with closely related reference strains indicated reassociation values below 32%. On the basis of phenotypic and genetic studies, a novel genus, Romboutsia gen. nov., is proposed. The novel isolate CRIBT (=DSM 25109T=NIZO 4048T) is proposed as the type strain of the type species, Romboutsia ilealis gen. nov., sp. nov., of the proposed novel genus. It is proposed that C. lituseburense is transferred to this genus as Romboutsia lituseburensis comb. nov. Furthermore, the reclassification into novel genera is proposed for C. bartlettii, as Intestinibacter bartlettii gen. nov., comb. nov. (type species of the genus), C. glycolicum, as Terrisporobacter glycolicus gen. nov., comb. nov. (type species of the genus), C. mayombei, as Terrisporobacter mayombei gen. nov., comb. nov., and C. irregulare, as Asaccharospora irregularis gen. nov., comb. nov. (type species

  12. Nonlinear super-resolution nano-optics and applications

    Wei, Jingsong

    2015-01-01

    This book covers many advances in the subjects of nano-optics and nano photonics. The author describes the principle and technical schematics of common methods for breaking through the optical diffraction limit and focuses on realizing optical super-resolution with nonlinear effects of thin film materials. The applications of nonlinear optical super-resolution effects in nano-data storage, nanolithography, and nano-imaging are also presented. This book is useful to graduate students majoring in optics and nano science and also serves as a reference book for academic researchers, engineers, technical professionals in the fields of super-resolution optics and laser techniques, nano-optics and nano photonics, nano-data storage, nano imaging, micro/nanofabrication and nanolithography and nonlinear optics.

  13. Siamia luxuriosa gen. et sp. nov., a new synnematous hyphomycete from Thailand

    Robert, Vincent; Decock, Cony; Castañeda Ruíz, Rafael F.

    2000-01-01

    A new synnematous hyphomycete, Siamia luxuriosa gen. et sp. nov., is described from Khao Yai National Park, Thailand. The genus is characterised by having long, dark synnemata, conidiogenous cells with numerous protuberant, cylindrical, thickened unilaterally arranged scars, and long, slightly

  14. Download - GenLibi | LSDB Archive [Life Science Database Archive metadata

    Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data ...access [here]. About This Database Database Description Download License Update History of This Database Site Policy | Contact Us Download - GenLibi | LSDB Archive ...

  15. License - GenLibi | LSDB Archive [Life Science Database Archive metadata

    Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data ...nse Update History of This Database Site Policy | Contact Us License - GenLibi | LSDB Archive ...

  16. Safety Design Criteria (SDC) for Gen-IV Sodium-cooled Fast Reactor

    Nakai, Ryodai

    2013-01-01

    SDC Development Background & Objectives: • Safety Design Criteria (SDC) Development for Gen-IV SFR: – Proposed at the GIF Policy Group (PG) meeting in October 2010 –SDC “harmonization” is increasingly important for: • Realization of enhanced safety designs meeting to Gen-IV safety goals and safety approach common to SFR systems; • Preparation for the forthcoming licensing in the near future; • Because Gen-IV SFR are progressing into conceptual design stage. • The SDC is the Reference criteria: – Of the designs of safety-related Structures, Systems & Components that are specific to the SFR system; – For clarifying the requisites systematically & comprehensively; – When the technology developers apply the basic safety approach and use the codes & standards for conceptual design of the Gen-IV SFR system

  17. Transformação genética em espécies florestais.

    Claudia Studart-Guimarães; Cristiano Lacorte; Ana Cristina Miranda Brasileiro

    2010-01-01

    A transformação genética, que compreende a introdução de genes exógenos de forma controlada no genoma de uma célula vegetal e posterior regeneração da planta transgênica, tem contribuído com os programas de melhoramento genético de plantas pela obtenção de genótipos com novas características de interesse. O melhoramento de espécies florestais é limitado por características intrínsecas a tais espécies, como a altura dos indivíduos e o ciclo longo de vida. A transformação genética constitui, po...

  18. A Software-Assurance Design Approach for NextGen Enabling Technologies, Phase I

    National Aeronautics and Space Administration — The Next Generation Air Transportation System (NextGen) brings significant advancements to the current management of the National Airspace (NAS). These fundamental...

  19. Ekspresi Gen CYP19 Aromatase, Estrogen, Androgen pada penderita Periodontitis Agresif

    Dahlia Herawati

    2016-11-01

    Full Text Available Kepadatan tulang tubuh ditentukan oleh gen CYP19 aromatase, hormon estrogen dan androgen. Pada periodontitis agresif terjadi perkembangan cepat kerusakan tulang alveolar, dan kerusakan tulang alveoler tersebut tidak diimbangioleh regenerasi tulang. Tujuan penelitian ini adalah menunjukkan ekspresi gen CYP19 aromatase, estrogen, androgen pada penderita periodontitis agresif agar dapat untuk menjadi pertimbangan pada saat melakukan perawatan periodontal. Metode penelitian, pemeriksaan ekspresi gen aromatse CYP19 berasal dari spesimen tulang alveolar menggunakan imunohistokimia, pengukuran hormon estrogen dan androgen dari serum menggunakan Vidas: Elfa. Hasil penelitian ekspresi gene CYP19 aromatase pada periodontitis agresif menunjukkan gambaran lebih rendah densitasnya dibandingkan pada nonperiodontitis. Estrogen dan androgen pad aperiodontitis agresif ada kecenderungan lebih rendah dibandingkan pada nonperiodontitis. Kesimpulan regenerasi tulang alveoler pad a periodontitis agresif terhambat karena sedikitnya gen CYP19 aromatase dan hormon estrogen dan androgen yang berperan pada pembentukan tulang alveoler kurang memadai.

  20. Neofomitella polyzonata gen. et sp. nov., and N. fumosipora and N. rhodophaea transferred from Fomitella

    Li, H.J.; Li, X.C.; Vlasák, Josef; Dai, Y.C.

    2014-01-01

    Roč. 129, č. 1 (2014), s. 7-20 ISSN 0093-4666 Institutional support: RVO:60077344 Keywords : Basidiomycota * phylogeny * polyporaceae * taxonomy Subject RIV: EB - Gen etics ; Molecular Biology Impact factor: 0.705, year: 2014

  1. CLONACIÓN Y FILOGENIA MOLECULAR DE UN SEGMENTO DEL GEN CODANTE DE LA ACTINA DE MYRCIARIA DUBIA “CAMU-CAMU”: UN CANDIDATO PARA GEN DE REFERENCIA

    Juan Carlos Castro Gómez

    2012-12-01

    Full Text Available Myrciaria dubia “camu-camu” es un frutal amazónico caracterizado por su amplia variación de vitamina C. Pero los estudios genético moleculares que puedan explicar esta variación son limitados. Por ello nuestro objetivo fue realizar la clonación y filogenia molecular de un segmento del gen codante de la actina de M. dubia. Las muestras fueron obtenidas de la colección de germoplasma del INIA. Luego, el ARN fue purificado y mediante RT-PCR con cebadores degenerados se amplificó un segmento del gen. En base a la secuencia obtenida se diseñaron cebadores específicos para PCR en tiempo real. Los resultados muestran que se ha aislado, clonado y secuenciado un segmento del gen codante de actina de M. dubia y detectado su expresión en hojas, pulpa y cáscara de M. dubia. Así, con el soporte de herramientas bioinformáticas y uso de técnicas de biología molecular hemos aislado, clonado y secuenciado un segmento del gen codante de la actina de M. dubia. Asimismo, los análisis realizados muestran que el gen se expresa y presenta niveles similares de expresión en hojas, pulpa y cáscara de M. dubia. Sin embargo, es necesario realizar más experimentos a fin de verificar su estabilidad de expresión.

  2. TRANSFER GEN ANTIVIRUS PADA EMBRIO UDANG WINDU, Penaeus monodon DALAM BERBAGAI KONSENTRASI DEOXYRIBO NUCLEIC ACID

    Andi Parenrengi

    2011-12-01

    Full Text Available Teknologi transgenesis khususnya rekayasa genetik untuk menghasilkan udang windu resisten penyakit merupakan salah satu strategi yang dapat dilakukan dalam upaya pemecahan masalah penyakit yang menimpa budidaya udang windu. Teknologi transgenesis khususnya transfer gen antivirus pada udang windu telah berhasil dilakukan melalui teknik transfeksi. Meskipun demikian optimalisasi komponen teknologi tersebut masih perlu dilakukan. Konsentrasi DNA gen merupakan salah satu komponen teknologi transgenesis yang harus dioptimalkan untuk mendapatkan efisiensi dalam transfer gen. Penelitian bertujuan untuk mengetahui konsentrasi DNA gen antivirus yang optimal sebagai bahan transfer gen ke embrio menggunakan metode transfeksi. Embrio udang windu yang diperoleh dari hasil pemijahan induk asal Aceh, dikoleksi 5-10 menit setelah memijah dengan kepadatan 625 telur/2 mL. Transfeksi dilakukan dengan menggunakan media larutan transfeksi jetPEI dengan konsentrasi DNA gen antivirus sebagai perlakuan, yakni: 5, 10, dan 15 µg serta kontrol positif (tanpa plasmid DNA dan negatif (tanpa plasmid DNA dan larutan transfeksi, masing-masing 3 ulangan. Embrio hasil transfeksi ditetaskan pada stoples berisi air laut sebanyak 2 L yang diletakkan pada waterbath. Hasil penelitian menunjukkan bahwa gen antivirus telah berhasil diintroduksi ke embrio udang windu. Hasil analisis ragam menunjukkan bahwa perbedaan konsentrasi DNA (5-15 µg tidak berpengaruh nyata (P>0,05 terhadap daya tetas embrio udang windu. Analisis ekspresi gen pada larva udang windu juga menunjukkan adanya aktivitas ekspresi gen antivirus pada semua perlakuan konsentrasi DNA, di mana ekspresi gen antivirus pada larva transgenik lebih tinggi dibandingkan dengan kontrol (tanpa transfeksi. Sintasan pasca-larva PL-1 yang didapatkan pada penelitian ini adalah 12,0%; 10,0%; 10,6%; 12,3%; dan 14,2% masing-masing untuk perlakuan konsentrasi plasmid DNA 5 µg, 10 µg, 15 µg, kontrol positif dan negatif, di mana

  3. KARAKTERISTIK SEKUEN cDNA PENGKODE GEN ANTI VIRUS DARI UDANG WINDU, Penaeus monodon

    Andi Parenrengi

    2016-11-01

    Full Text Available Transgenesis pada ikan merupakan sebuah teknik modern yang berpotensi besar dalam menghasilkan organisme yang memiliki karakter lebih baik melalui rekombinan DNA gen target termasuk gen anti virus dalam peningkatan resistensi pada udang. Gen anti virus PmAV (Penaeus monodon Anti Viral gene merupakan salah satu gen pengkode anti virus yang berasal dari spesies krustase. Penelitian ini dilakukan untuk mengetahui karakteristik gen anti virus yang diisolasi dari udang windu, Penaeus monodon. Isolasi gen anti virus menggunakan metode Polymerase Chain Reaction (PCR dan selanjutnya dipurifikasi untuk sekuensing. Data yang dihasilkan dianalisis dengan program Genetyx Versi 7 dan basic local alignment search tool (BLAST. Hasil penelitian menunjukkan bahwa gen anti virus PmAV yang berhasil diisolasi dari cDNA udang windu dengan panjang sekuen 520 bp yang mengkodekan 170 asam amino. BLAST-N menunjukkan tingkat similaritas yang sangat tinggi (100% dengan gen anti virus yang ada di GeneBank. Komposisi asam amino penyusun gen anti virus yang paling besar adalah serin (10,00%, sedangkan yang terkecil adalah asam amino prolin dan lisin masing-masing 1,76%. Analisis sekuen gen dan deduksi asam amino (BLAST-P memperlihatkan adanya C-type lectin-like domain (CTLD yang memiliki kemiripan dengan gen C-type lectin yang diisolasi dari beberapa spesies krustase. Transgenic fish technology is a potential modern technique in producing better character organism through DNA recombinant of target genes including anti viral gene for improvement of shrimp immunity. PmAV (Penaeus monodon Anti Viral gene is one of anti viral genes isolated from crustacean species. The research was conducted to analyze the characteristics anti viral gene isolated from tiger prawn, Penaeus monodon. Anti viral gene was isolated using Polymerase Chain Reaction (PCR technique and then purified for sequencing. Data obtained were analyzed using Genetyx Version 7 software and basic local alignment

  4. Aluminum Templates of Different Sizes with Micro-, Nano- and Micro/Nano-Structures for Cell Culture

    Ming-Liang Yen

    2017-10-01

    Full Text Available This study investigates the results of cell cultures on aluminum (Al templates with flat-structures, micro-structures, nano-structures and micro/nano-structures. An Al template with flat-structure was obtained by electrolytic polishing; an Al template with micro-structure was obtained by micro-powder blasting; an Al template with nano-structure was obtained by aluminum anodization; and an Al template with micro/nano-structure was obtained by micro-powder blasting and then anodization. Osteoblast-like cells were cultured on aluminum templates with various structures. The microculture tetrazolium test assay was utilized to assess the adhesion, elongation, and proliferation behaviors of cultured osteoblast-like cells on aluminum templates with flat-structures, micro-structures, nano-structures, and micro/nano-structures. The results showed that the surface characterization of micro/nano-structure of aluminum templates had superhydrophilic property, and these also revealed that an aluminum template with micro/nano-structure could provide the most suitable growth situation for cell culture.

  5. Mass production of polymer nano-wires filled with metal nano-particles.

    Lomadze, Nino; Kopyshev, Alexey; Bargheer, Matias; Wollgarten, Markus; Santer, Svetlana

    2017-08-17

    Despite the ongoing progress in nanotechnology and its applications, the development of strategies for connecting nano-scale systems to micro- or macroscale elements is hampered by the lack of structural components that have both, nano- and macroscale dimensions. The production of nano-scale wires with macroscale length is one of the most interesting challenges here. There are a lot of strategies to fabricate long nanoscopic stripes made of metals, polymers or ceramics but none is suitable for mass production of ordered and dense arrangements of wires at large numbers. In this paper, we report on a technique for producing arrays of ordered, flexible and free-standing polymer nano-wires filled with different types of nano-particles. The process utilizes the strong response of photosensitive polymer brushes to irradiation with UV-interference patterns, resulting in a substantial mass redistribution of the polymer material along with local rupturing of polymer chains. The chains can wind up in wires of nano-scale thickness and a length of up to several centimeters. When dispersing nano-particles within the film, the final arrangement is similar to a core-shell geometry with mainly nano-particles found in the core region and the polymer forming a dielectric jacket.

  6. Description of Sharon gen. nov. for the Chilean species Asaphes amoenus Philippi, 1861 (Coleoptera: Elateridae)

    Elizabeth T. Arias-Bohart; Mario Elgueta

    2015-01-01

    Sharon gen. nov. is here described to include Asaphes? amoenus Philippi, 1861 comb. nov. from Chile. A redescription of the species is based on the female holotype and material from different geographic locations. Candèze (1891) placed Asaphes amoenus and Parasaphes elegans in the suprageneric group Asaphites. We discuss differences between Sharon gen. nov. and Hemicrepidius Germar, 1839, where Asaphes amoenus was later placed by Blackwelder (1944). Based on morphological characters, Sharon g...

  7. GenRGenS: Software for Generating Random Genomic Sequences and Structures

    Ponty , Yann; Termier , Michel; Denise , Alain

    2006-01-01

    International audience; GenRGenS is a software tool dedicated to randomly generating genomic sequences and structures. It handles several classes of models useful for sequence analysis, such as Markov chains, hidden Markov models, weighted context-free grammars, regular expressions and PROSITE expressions. GenRGenS is the only program that can handle weighted context-free grammars, thus allowing the user to model and to generate structured objects (such as RNA secondary structures) of any giv...

  8. GenMapDB: a database of mapped human BAC clones

    Morley, Michael; Arcaro, Melissa; Burdick, Joshua; Yonescu, Raluca; Reid, Thomas; Kirsch, Ilan R.; Cheung, Vivian G.

    2001-01-01

    GenMapDB (http://genomics.med.upenn.edu/genmapdb) is a repository of human bacterial artificial chromosome (BAC) clones mapped by our laboratory to sequence-tagged site markers. Currently, GenMapDB contains over 3000 mapped clones that span 19 chromosomes, chromosomes 2, 4, 5, 9–22, X and Y. This database provides positional information about human BAC clones from the RPCI-11 human male BAC library. It also contains restriction fragment analysis data and end sequen...

  9. Medicamentos genéricos y de marca-Calidad e intercambiabilidad

    Rua F.

    2012-03-01

    Full Text Available El interés por los medicamentos genéricos procede de la necesidad de los sistemas sanitarios de reducir la factura sanitaria sin merma de los objetivos de salud. Su expansión y uso requieren la aceptación de la población y de los profesionales. También requieren que se despejen algunas dudas sobre su verdadera equivalencia respecto a los medicamentos originales. Desde su introducción en el mercado farmacéutico existe el debate de si son correctamente investigados y de alta calidad. No son infrecuentes los conceptos equivocados entre los profesionales sobre los genéricos, en especial, el supuesto hecho de que pueden llegar a contener hasta un 20% menos de concentración en principio activo. Estas creencias erróneas sugieren una situación de desventaja en la eficacia y la tolerabilidad de los medicamentos genéricos comparados con sus equivalentes de marca, disminuyendo la credibilidad de los mismos. Así, en una encuesta realizada en 2008 los farmacéuticos opinaron que los genéricos y las marcas son diferentes en eficacia (26%, equivalencia (28% y, sobre todo, en la calidad del excipiente (46%, aumentando la percepción de que los genéricos son diferentes en función del laboratorio que los fabrica (52,8%. En este artículo, con el fin de ampliar los conocimientos sobre medicamentos genéricos, solucionar dudas y proporcionar información, objetiva, clara y rigurosa, se revisan los posibles prejuicios sobre genéricos y se exponen las evidencias que existen en torno a los mismos, como los requisitos de bioequivalencia de los productos genéricos, analizando si ésta corrobora adecuadamente la equivalencia terapéutica y de intercambio.

  10. Genes and proteins of Escherichia coli K-12 (GenProtEC).

    Riley, M

    1997-01-01

    GenProtEC is a database of Escherichia coli genes and their gene products, classified by type of function and physiological role and with citations to the literature for each. Also present are data on sequence similarities amongE.coliproteins with PAM values, percent identity of amino acids, length of alignment and percent aligned. GenProtEC can also be accessed through the World Wide Web at URL http://mbl.edu/html/ecoli.html .

  11. Traffic Generator (TrafficGen) Version 1.4.2: Users Guide

    2016-06-01

    the network with Transmission Control Protocol and User Datagram Protocol Internet Protocol traffic. Each node generating network traffic in an...TrafficGen Graphical User Interface (GUI) 3 3.1 Anatomy of the User Interface 3 3.2 Scenario Configuration and MGEN Files 4 4. Working with...for public release; distribution is unlimited. vi List of Figures Fig. 1 TrafficGen user interface

  12. Spin-accumulation effect in magnetic nano-bridge

    Khvalkovskii, A.V.; Zvezdin, A.A.; Zvezdin, K.A.; Pullini, D.; Perlo, P.

    2004-01-01

    Large values of magnetoresistance experimentally observed in magnetic nano-contacts and nano-wires are explained in terms of spin accumulation. The investigation of the spin-accumulation effect in magnetic nano-contacts (Phys. Rev. Lett. 82 (1999) 2923) and nano-bridges (JETP Lett. 75 (10) (2002) 613), which are considered to be very promising for various spintronic applications, is presented. The two-dimensional spin-diffusion problem in a magnetic nano-bridge is solved. Dependences of the specific resistance of the domain wall and of the distribution of non-equilibrium spin density on the nano-bridge geometry and the material parameters are obtained

  13. Stacked dipole line source excitation of active nano-particles

    Arslanagic, Samel

    This work investigates electromagnetic properties of cylindrical active coated nano-particles excited by a stac- ked electric dipole line source. The nano-particles consist of a silica nano-core, layered by silver, gold, or copper nano-shell. Attention is devoted to the influence of the source...... location and dipole orientation, the gain constant, and the nano-particle material composition on the electromagnetic field distributions and radiated powers. The results are contrasted to those for the magnetic line source illumination of the nano-particles....

  14. A Fabrication Technique for Nano-gap Electrodes by Atomic Force Microscopy Nano lithography

    Jalal Rouhi; Shahrom Mahmud; Hutagalung, S.D.; Kakooei, S.

    2011-01-01

    A simple technique is introduced for fabrication of nano-gap electrodes by using nano-oxidation atomic force microscopy (AFM) lithography with a Cr/ Pt coated silicon tip. AFM local anodic oxidation was performed on silicon-on-insulator (SOI) surfaces by optimization of desired conditions to control process in contact mode. Silicon electrodes with gaps of sub 31 nm were fabricated by nano-oxidation method. This technique which is simple, controllable, inexpensive and fast is capable of fabricating nano-gap structures. The current-voltage measurements (I-V) of the electrodes demonstrated very good insulating characteristics. The results show that silicon electrodes have a great potential for fabrication of single molecule transistors (SMT), single electron transistors (SET) and the other nano electronic devices. (author)

  15. Applications and Nano toxicity of Carbon Nano tubes and Graphene in Biomedicine Caitlin Fisher

    Rider, A.E.; Han, Z.J.; Kumar, S.; Levchenko, L.; Ostrikov, K.K.

    2012-01-01

    Owing to their unique mechanical, electrical, optical, and thermal properties, carbon nano structures including carbon nano tubes and graphenes show great promise for advancing the fields of biology and medicine. Many reports have demonstrated the promise of these carbon nano structures and their hybrid structures (composites with polymers, ceramics, and metal nanoparticles, etc.) for a variety of biomedical areas ranging from bio sensing, drug delivery, and diagnostics, to cancer treatment, tissue engineering, and bio terrorism prevention. However, the issue of the safety and toxicity of these carbon nano structures, which is vital to their use as diagnostic and therapeutic tools in biomedical fields, has not been completely resolved. This paper aims to provide a summary of the features of carbon nano tube and graphene-based materials and current research progress in biomedical applications. We also highlight the current opinions within the scientific community on the toxicity and safety of these carbon structures

  16. PRODUCTIVE GENERATIONS AND CAREERS: WHAT DO (Y GEN WOMEN WANT?

    Ana Heloísa Costa Lemos

    2014-07-01

    Full Text Available Despite the attention that Generation Y has received in recent times, studies that map the attitudes related to work of these individuals has devoted little attention to understanding the differences that gender can produce in the same generational group. However, we believe that gender differences should be better understood, because, according to the IBGE (2012, women represent 45.4% of the current Brazilian labor force. The growing importance of women in the labor market brings the challenge for organizations to attract and retain that portion of the workforce, whose demands are not necessarily equal those of men. The scarcity of studies on the expectations related to career of Gen Y women motivated the present work, which sought to understand the desires of young professionals with regard to the construction of their professional careers. To answer these questions we carried out a qualitative research, interviewing young women born between 1980 and 2000. We tried to understand what these professionals expect from its insertion in the labor market. The results confirm the analysis of the descriptions of the recent literature on Yrs, because the interviewees proved eager for success, professional recognition and attractive remuneration, but also highlight differences and indicate some specifics aspects related to the gender considerations, as expressed by these young woman, which expect to lower their work dedication when they become mothers and wives.

  17. De compras por el supermercado genético

    Singer, Peter

    2002-12-01

    Full Text Available Should we say that selective abortion is a “powerful message that we seek to eliminate future persons”? When deaf parents want to have a deaf children, Are they crazy? Are they advocates of a culture –the Deaf culture? If genetic engineering can give us health, intelligent, and athletic childrens, why say not to this advantages? The aim of this article is not to deal with all objections that could be urged against these options; the purpose is developing a clear understanding of the central values at stake.

    ¿Estamos eliminando una cultura, la de los sordos, cuando tratamos de evitar que nazcan niños sordos? El aborto terapéutico, ¿significa que, por ejemplo, creemos que las vidas de los afectados por síndrome de Down son vidas de menor valor que las vidas “normales”? Si se permitiera la manipulación genética de los embriones ¿sería poco ético encargar hijos guapos y altos? Este artículo no aporta respuestas a estas preguntas, pero sí que plantea los términos para dar cuenta de ellas y eleva acta de lo difícil que es dar una respuesta concluyente.

  18. Environmental sensitivity studies for Gen-IV roadmap DUPIC scenario

    Jeong, Chang Joon

    2004-03-01

    The environmental effect of the DUPIC (Direct Use of Spent PWR Fuel in CANDU Reactors) fuel cycle, which is considered as one of the partial recycle scenario in Gen-IV roadmap, has been analyzed by using the dynamic analysis method. Through the parametric calculations for the DUPIC fuel cycle deployment time and the fraction of the DUPIC reactors, the environmental effects of the fuel cycle for important parameters such as the amount of spent fuel and the combined amounts of plutonium and minor actinides were estimated and compared to those of the once-through LWR fuel cycle. The results of the sensitivity calculations showed that an early deployment of the DUPIC fuel cycle with a high DUPIC reactor fraction can reduce the accumulation of spent fuel by up to 40%. More important is the associated reduction in the combined amount of plutonium and minor actinides, which may reduce the key repository parameter (long term decay heat). Therefore it is expected that favorable environmental effects will be the outcome of the implementation of the DUPIC fuel cycle

  19. Université de Genève

    2008-01-01

    Ecole de physique - Département de physique nucléaire et corspusculaire 24, quai Ernest-Ansermet 1211 GENÈVE 4 Tél: (022) 379 62 73 - Fax: (022) 379 69 92 Lundi 1er décembre 2008 PARTICLE PHYSICS SEMINAR at 17.00 hrs – Stückelberg Auditorium Superconducting Interfaces between Insulating Oxide Prof. Jean-Marc TRISCONE / Université de Genève At interfaces between complex oxides, electronic systems with unusual properties can be generated. A striking example is the interface between LaAlO3 and SrTiO3, two good insulating perovskite oxides, which was found in 2004 to be conducting with a high mobility. We recently discovered that the ground state of this system is a superconducting condensate, with a critical temperature of about 200 mK. The characteristics observed for the superconducting transitions are consistent with a two-dimensional superconducting sheet as thin as a few nanometers. Recent field effect experiments revealed the sensitivity of the normal and superconducting states to the carrier d...

  20. Université de Genève

    2008-01-01

    Ecole de physique - Département de physique nucléaire et corspusculaire 24, quai Ernest-Ansermet - 1211 GENÈVE 4 Tél: (022) 379 62 73 - Fax: (022) 379 69 92 Lundi 1er décembre 2008 PARTICLE PHYSICS SEMINAR at 17.00 hrs – Stückelberg Auditorium Superconducting Interfaces between Insulating Oxide Prof. Jean-Marc TRISCONE / Université de Genève At interfaces between complex oxides, electronic systems with unusual properties can be generated. A striking example is the interface between LaAlO3 and SrTiO3, two good insulating perovskite oxides, which was found in 2004 to be conducting with a high mobility. We recently discovered that the ground state of this system is a superconducting condensate, with a critical temperature of about 200 mK. The characteristics observed for the superconducting transitions are consistent with a two-dimensional superconducting sheet as thin as a few nanometers. Recent field effect experiments revealed the sensitivity of the normal and superconducting states to the carrier ...

  1. Testes genéticos na eqüideocultura

    Eduardo Geraldo Alves Coelho

    2008-07-01

    Full Text Available Nos últimos anos a equideocultura deu um salto qualitativo, havendo hoje, no mercado, animais de alto valor e geneticamente superiores. Isso é possível, em grande parte, devido aos avanços na área da genética animal, os quais permitem identificar, não apenas anomalias, mas também diversos genes de interesse econômico. Com o auxílio da citogenética pode-se identificar indivíduos com alterações no número ou na estrutura dos cromossomos, o que em muitos casos afeta principalmente a reprodução. Também a confirmação de genealogia, anteriormente feita por tipagem sangüínea e atualmente por testes de DNA, tem papel extremamente importante, não apenas por garantir a ascendência dos animais, mas também porque um pedigree confiável pode permitir ao criador identificar a origem de problemas genéticos em seu rebanho e reduzi-los ou mesmo, eliminá-los. Ainda com as ferramentas da biologia molecular, podemos hoje, identificar indivíduos que apresentam genes desejáveis ou indesejáveis, o que nos permite selecioná-los precocemente, reduzindo assim, os custos do produtor e aumentando o valor agregado dos animais. Entre tais genes podemos destacar os que identificam portadores ou afetados por mutações genéticas indesejáveis como: SCID (Síndrome da Imunodeficiência Combinada, HYPP (Parilisa Hipercalêmica, HERDA (Astenia Dérmica Regional Hereditária Eqüina, etc. Também a identificação dos genes que determinam a cor ou padrão da pelagem já pode ser feita direta ou indiretamente (por meio de marcadores genéticos, como é o caso dos genes para as pelagens Overo, Tobiano, etc. Com os avanços no estudo do genoma eqüino muito mais estará disponível em breve, o que certamente só trará maiores contribuições à equideocultura mundial.In the last few years the horse breeding industry is achieving significant progresses producing animals of high commercial value and genetically superior. It was possible, mainly due to

  2. Superconducting nano-striplines as quantum detectors

    Casaburi, A.; Ejrnaes, M.; Mattioli, F.; Gaggero, A.; Leoni, R.; Martucciello, N.; Pagano, S.; Ohkubo, M.; Cristiano, R.

    2011-01-01

    The recent progress in the nanofabrication of superconducting films opens the road toward detectors with highly improved performances. This is the case for superconducting nano-striplines where the thickness and the width are pushed down to the extreme limits to realize detectors with unprecedented sensitivity and ultra fast response time. In this way quantum detectors for single photons at telecommunication wavelengths and for macromolecules such as proteins can be realized. As is often the case in applied nanotechnology, it is a challenge to make devices with the necessary macroscopic dimensions that are needed to interface present technologies, while maintaining the performance improvements. For nano-stripline detectors, both the fast temporal response and the device sensitivity is generally degraded when the area is increased. Here, we present how such detectors can be scaled up to macroscopic dimensions without losing the performance of the nano-structured active elements by using an innovative configuration. In order to realize ultrathin superconducting film the nano-layer is growth with a careful setup of the deposition technique which guarantees high quality and thickness uniformity at the nano-scale size. The active nano-strips are defined with the state-of-the-art electron beam nanolithography to achieve a highly uniform linewidth. We present working detectors based on nano-strips with thicknesses 9–40 nm and widths of 100–1000 nm which exhibit unprecedented speed and area coverage (40 × 40 μm 2 for single photon detectors and 1 × 1 mm 2 for single molecule detectors) based on niobium nitride thus enabling practical use of this nanotechnology.

  3. Oxidation of nano-reinforced polyolefins

    Gutierrez Castro, G.G.

    2010-11-01

    Nano-composite materials attract search due to their improvements on barrier properties by incorporating low level of nano-filler of 5%w. Nowadays, organically modified montmorillonite (MMT-O) is the most used filler due to its high aspect ratio which permits stronger clay/polymer interactions. If nano-reinforced materials are highly performing, the ways in which clay presence affects polyolefin durability have not being subject of a rigorous study, thus they are not yet clear. Our goal was to examine unstabilized clay polypropylene and unstabilized clay polyethylene nano composites to get a better comprehension of the clay effects on their thermo-oxidation process under low temperatures. The effects induced by a dual physic-chemical nature of the clay were explored. The problem was tackled from both experimental and theoretical point of views for degradation process not controlled and controlled by oxygen diffusion (homogenous and heterogeneous respectively). It seems that MMT-O speeds up oxidation. This phenomenon was modeled by adding a catalytic reaction between metallic particles initially present in the MMT-O and hydroperoxide groups (main responsible of oxidation). Regarding the oxygen permeability two situations were confronted: for the clay polypropylene system a decrease of 45% of oxygen permeability was measured. On the other hand, no variation was found for the polyethylene case. This effect was attributed to the fact that polyethylene nano-composite reached a blend morphology less developed than those of the polypropylene nano-composite. Kinetics and oxidation products profiles across the sample thickness were simulated for both systems by coupling oxidation reactions with oxygen diffusion equations. For the polyethylene case, the effects induced by oxidation on molar mass and crystalline morphology were also simulated. Finally, based on a structure-property relationship, simulations of mechanic modulus profiles were performed for the heterogeneous

  4. Polymer/Layered Silicate Nano composites

    Bakhit, M.E.E.H.

    2012-01-01

    Polymer–clay nano composites have attracted the attention of many researchers and experimental results are presented in a large number of recent papers and patents because of the outstanding mechanical properties and low gas permeabilities that are achieved in many cases. Polymer-clay nano composites are a new class of mineral-field polymer that contain relatively small amounts (<10%) of nanometer-sized clay particles. Polymer/clay nano composites have their origin in the pioneering research conducted at Toyota Central Research Laboratories and the first historical record goes back to 1987. The matrix was nylon-6 and the filler MMT. Because of its many advantages such as high mechanical properties, good gas barrier, flame retardation, etc. polymer/clay nano composites have been intensely investigated and is currently the subject of many research programs. Nano composite materials are commercially important and several types of products with different shapes and applications including food packaging films and containers, engine parts, dental materials, etc. are now available in markets. A number of synthesis routes have been developed in the recent years to prepare these materials, which include intercalation of polymers or prepolymers from solution, in-situ polymerization, melt intercalation etc. In this study, new nano composite materials were produced from the components of rubber (Nbr, SBR and EPDM) as the polymeric matrix and organically modified quaternary alkylammonium montmorillonite in different contents (3, 5, 7, and 10 phr) as the filler by using an extruder then, the rubber nano composite sheets were irradiated at a dose of 0, 50, 75, 100 and 150 KGy using Electron beam Irradiation technique as a crosslinking agent. These new materials can be characterized by using various analytical techniques including X-ray diffractometer XRD, Thermogravimetric analyzer TGA, scanning electron microscope (SEM), transmission electron microscope (TEM),Fourier transform

  5. Nano-plastics in the aquatic environment.

    Mattsson, K; Hansson, L-A; Cedervall, T

    2015-10-01

    The amount of plastics released to the environment in modern days has increased substantially since the development of modern plastics in the early 1900s. As a result, concerns have been raised by the public about the impact of plastics on nature and on, specifically, aquatic wildlife. Lately, much attention has been paid to macro- and micro-sized plastics and their impact on aquatic organisms. However, micro-sized plastics degrade subsequently into nano-sizes whereas nano-sized particles may be released directly into nature. Such particles have a different impact on aquatic organisms than larger pieces of plastic due to their small size, high surface curvature, and large surface area. This review describes the possible sources of nano-sized plastic, its distribution and behavior in nature, the impact of nano-sized plastic on the well-being of aquatic organisms, and the difference of impact between nano- and micro-sized particles. We also identify research areas which urgently need more attention and suggest experimental methods to obtain useful data.

  6. Instrument platforms for nano liquid chromatography.

    Šesták, Jozef; Moravcová, Dana; Kahle, Vladislav

    2015-11-20

    The history of liquid chromatography started more than a century ago and miniaturization and automation are two leading trends in this field. Nanocolumn liquid chromatography (nano LC) and largely synonymous capillary liquid chromatography (capillary LC) are the most recent results of this process where miniaturization of column dimensions and sorbent particle size play crucial role. Very interesting results achieved in the research of extremely miniaturized LC columns at the end of the last century lacked distinctive raison d'être and only advances in mass spectrometry brought a real breakthrough. Configuration of nano LC-electrospray ionization mass spectrometry (LC-ESI-MS) has become a basic tool in bioanalytical chemistry, especially in proteomics. This review discusses and summarizes past and current trends in the realization of nano liquid chromatography (nano LC) platforms. Special attention is given to the mobile phase delivery under nanoflow rates (isocratic, gradient) and sample injection to the nanocolumn. Available detection techniques applied in nano LC separations are also briefly discussed. We followed up the key themes from the original scientific reports over gradual improvements up to the contemporary commercial solutions. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Nano antibody therapy for cancer

    Venkatachallam, M.; Sivakumar, T.; Nazeema; Venkateswari, P.

    2011-01-01

    Nanomedicine, an offshoot of nanotechnology, refers to highly specific medical intervention at the molecular scale for curing disease or repairing damaged tissues, such as bone, muscle, or nerve. Nanotechnology can have an early, paradigm-changing impact on how clinicians will detect cancer in its earliest stages. Exquisitely sensitive devices constructed of nanoscale components-such as nanocantilevers, nanowires and nanochannels-offer the potential for detecting even the rarest molecular signals associated with malignancy. One of the most pressing needs in clinical oncology is for imaging agents that can identify tumors that are far smaller than is possible with today's technology, at a scale of 100,000 cells rather than 1,000,000,000 cells. A new approach in nanotechnology for treating cancer incorporates nano iron particles and attaches them to an antibody that has targets only cancer cells and not healthy cells. The treatment works in two steps. This treatment is an ingenious way to make localized tumor ablation a systemic treatment. The advantages are incredible. There are absolutely no side effects from this treatment. It is not painful or even uncomfortable. The iron particles get flushed harmlessly from the body. It is not a drug and so the cancer cannot build up a resistance to the treatment. It is a systematic treatment; even cancer cells and tumors that are not known about get heated up and ablated. This treatment can even be used to enhance imaging of the cancer because once the cancer cells are coated with the iron particles, they are easy to identify. Everything depends on how reliably the antibodies target cancer cells and not healthy cells. When used in conjunction with other systemic treatments, such as vaccine treatments, we could be looking at a time when even advanced cancers can be brought under control. (author)

  8. Programa nacional de prevención y consejería genética del retinoblastoma mediante detección de mutaciones en el gen RB.

    H. Frayle

    2001-07-01

    una la doble mutación inactivante del gen Rb, exclusivamente somática en los esporádicos y germinal más somática en los hereditarios. Esta investigacin tuvo como objetivo caracterizar las mutaciones en el gen Rb mediante secuenciación directa y evaluar su utilidad en la consejería genética.

  9. Enfermedades genéticas más frecuentes en pacientes atendidos en consulta de genética clínica

    Elibett Carcasés Carcasés

    2015-02-01

    Full Text Available La estimación de la prevalencia de las enfermedades genéticas se dificulta, entre otras causas, por su rareza. Se realizó un estudio descriptivo retrospectivo, para identificar las enfermedades genéticas de mayor prevalencia en pacientes atendidos por este programa en el Centro Provincial de Genética Médica de Las Tunas, Cuba; desde el año 1989 hasta julio de 2014. Se revisaron todas las historias clínicas. Predominó el origen monogénico (69 %, siendo los síndromes dismórficos los más numerosos y diversos, entre ellos los neurocutáneos, que representaron el 35 %. La enfermedad genética monogénica con mayor número de casos fue la Neurofibromatosis I con el 14,4 % y el 22,2 % de las enfermedades eran de origen monogénico y dismórfico. La Trisomía 21 representó el 77 % de la causa cromosómica. En el origen multifactorial prevalecieron los defectos congénitos mayores, entre ellos los defectos reductivos de miembros (27 %

  10. Genética de la preeclampsia: una aproximación a los estudios de ligamiento genético.

    Nora Alejandra Zuluaga

    2004-06-01

    Full Text Available La preeclampsia es considerada un problema de salud pública debido a su alta prevalencia. Muchas investigaciones coinciden en que su origen se relaciona con la interacción entre factores genéticos y ambientales. Por esta razón, múltiples estudios han explorado tales factores genéticos tratando de identificar regiones cromosómicas y genes candidatos cuyas variantes se relacionen con una mayor susceptibilidad a la enfermedad. Diversos estudios de asociación han identificado algunos genes de susceptibilidad a la preeclampsia, pero los resultados no se han replicado consistentemente en todas las poblaciones, quizá por su complejidad clínica y genética. El levantamiento de mapas de genes y regiones cromosómicas basado en análisis de ligamiento ha mostrado resultados interesantes con algunos marcadores en los cromosomas 2 y 4. En este sentido, hay muchas expectativas con respecto a los genes localizados en tales regiones candidatas, debido a que la identificación de los factores de riesgo genético podría ayudar al entendimiento de esta condición y en proveer claves para su prevención y tratamiento.

  11. Structure-­mediated nano-­biophotonics

    Glückstad, Jesper; Villangca, Mark Jayson; Bañas, Andrew Rafael

    2015-01-01

    The synergy between photonics, nanotechnology and biotechnology is spawning the emerging fields of nano-biotechnology and nano-biophotonics. Photonic innovations already hurdle the diffraction barrier for imaging with nanoscopic resolutions. However, scientific hypothesis testing demands tools...

  12. From Nano Structure to Systems: Fabrication and Characterization

    Uda Hashim

    2011-01-01

    Currently, the interest in nano technology research has been grown rapidly. With the latest technology, it is possible to arrange atoms into structures that are only a few nanometers in size. Dimension for nano structure is between 0.1 and 100nm where the actual size of 1nm is equal to 10-9 m or just about a few atoms thick. In other word, a nano structure is an object which it size is about four atom diameters or 1/50000 of a human hair. Due to the connecting of a patterned silicon substrate with biomolecules and the small size and large surface-to-volume ratio, it opens much new possibility for assembling nano structures.The ultimate goal is to fabricate devices that have every atom in the right place. Such technology would give the opportunity to minimize the size of a device and to reduce the material, energy and time necessary to perform its task. Potential applications include electrical circuits, mechanical devices and medical instruments. There are two most important nano structures that are extensively studied and researched in various organizations which are nano wire and nano gap. Nano wires is a new class of nano structure that have attracted attention and great research interest in the last few years because of their potential applications in nano technology such as nano electronic, nano mechanical and biomedical engineering. Fabrication of Nano wires is one of the great challenges today. Conventional lithography methods are not capable to produce Nano wires and even with advance nano lithography sizes below 100 nm may not easily be achieved. Nano wire can be produced in two approaches, which are top down and bottom-up method. Very small nano wires which can be produced by using top-down nano fabrication methods are Scanning Electron Microscope (SEM) based Electron Beam Lithography (EBL) method, and Spacer Patterning Lithography (SPL) method. The top-down nano fabrication method based on EBL was the design of the Nano wires Pattern Design (NPD). The

  13. Nano Surface Engineering in the 21st Century

    Xu Bin-shi; Wang Hai-dou; Dong Shi-yun; Shi Pei-jing; Xu Yi

    2004-01-01

    Nano surface engineering is the new development of surface engineering, and is the typical representation that the advanced nano technology improves the traditional surface engineering. The connotation of nano surface engineering is profound. The initial stage of nano surface engineering is realized at present day. The key technologies of nano surface engineering are the support to the equipment remanufacturing. Today the relatively mature key technologies are: nano thermal spraying technology, nano electric-brush plating technology, nano self-repairing anti-friction technology and metal surface nanocrystallization, etc. Many scientific issues have been continuously discovered. Meanwhile they have been applied in the practice more and more, and have archived the excellent remanufacturing effect.

  14. Assessing nano cellulose developments using science and technology indicators

    Milanez, Douglas Henrique; Amaral, Roniberto Morato do; Faria, Leandro Innocentini Lopes de; Gregolin, Jose Angelo Rodrigues

    2013-01-01

    This research aims to examine scientific and technological trends of developments in nano cellulose based on scientometric and patent indicators obtained from the Science Citation Index and Derwent Innovations Index in 2001-2010. The overall nano cellulose activity indicators were compared to nanotechnology and other selected nano materials. Scientific and technological future developments in nano cellulose were forecasted using extrapolation growth curves and the main countries were also mapped. The results showed that nano cellulose publications and patent documents have increased rapidly over the last five years with an average growth rate higher than that of nanotechnology and fullerene. The USA, Japan, France, Sweden and Finland all played a significant role in nano cellulose development and the extrapolation growth curves suggested that nano cellulose scientific and technological activities are still emerging. Finally, the evidence from this study recommends monitoring nano cellulose S and T advances in the coming years. (author)

  15. Assessing nano cellulose developments using science and technology indicators

    Milanez, Douglas Henrique; Amaral, Roniberto Morato do; Faria, Leandro Innocentini Lopes de; Gregolin, Jose Angelo Rodrigues, E-mail: douglasmilanez@yahoo.com.br [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Nucleo de Informacao Tecnologica em Materiais. Dept. de Engenharia de Materiais

    2013-11-01

    This research aims to examine scientific and technological trends of developments in nano cellulose based on scientometric and patent indicators obtained from the Science Citation Index and Derwent Innovations Index in 2001-2010. The overall nano cellulose activity indicators were compared to nanotechnology and other selected nano materials. Scientific and technological future developments in nano cellulose were forecasted using extrapolation growth curves and the main countries were also mapped. The results showed that nano cellulose publications and patent documents have increased rapidly over the last five years with an average growth rate higher than that of nanotechnology and fullerene. The USA, Japan, France, Sweden and Finland all played a significant role in nano cellulose development and the extrapolation growth curves suggested that nano cellulose scientific and technological activities are still emerging. Finally, the evidence from this study recommends monitoring nano cellulose S and T advances in the coming years. (author)

  16. Formation of Au nano-patterns on various substrates using simplified nano-transfer printing method

    Kim, Jong-Woo; Yang, Ki-Yeon; Hong, Sung-Hoon; Lee, Heon

    2008-06-01

    For future device applications, fabrication of the metal nano-patterns on various substrates, such as Si wafer, non-planar glass lens and flexible plastic films become important. Among various nano-patterning technologies, nano-transfer print method is one of the simplest techniques to fabricate metal nano-patterns. In nano-transfer printing process, thin Au layer is deposited on flexible PDMS mold, containing surface protrusion patterns, and the Au layer is transferred from PDMS mold to various substrates due to the difference of bonding strength of Au layer to PDMS mold and to the substrate. For effective transfer of Au layer, self-assembled monolayer, which has strong bonding to Au, is deposited on the substrate as a glue layer. In this study, complicated SAM layer coating process was replaced to simple UV/ozone treatment, which can activates the surface and form the -OH radicals. Using simple UV/ozone treatments on both Au and substrate, Au nano-pattern can be successfully transferred to as large as 6 in. diameter Si wafer, without SAM coating process. High fidelity transfer of Au nano-patterns to non-planar glass lens and flexible PET film was also demonstrated.

  17. Preparation, Characterization, and Modeling of Carbon Nano fiber/Epoxy Nano composites

    Sun, L.H.; Yang, Z.G.; Ounaies, Z.; Whalen, C.A.; Gao, X.L.

    2011-01-01

    There is a lack of systematic investigations on both mechanical and electrical properties of carbon nano fiber (CNF)-reinforced epoxy matrix nano composites. In this paper, an in-depth study of both static and dynamic mechanical behaviors and electrical properties of CNF/epoxy nano composites with various contents of CNFs is provided. A modified Halpin-Tsai equation is used to evaluate the Young's modulus and storage modulus of the nano composites. The values of Young's modulus predicted using this method account for the effect of the CNF agglomeration and fit well with those obtained experimentally. The results show that the highest tensile strength is found in the epoxy nano composite with a 1.0 wt % CNFs. The alternate-current (AC) electrical properties of the CNF/epoxy nano composites exhibit a typical insulator-conductor transition. The conductivity increases by four orders of magnitude with the addition of 0.1 wt % (0.058 vol %) CNFs and by ten orders of magnitude for nano composites with CNF volume fractions higher than 1.0 wt % (0.578 vol %). The percolation threshold (i.e., the critical CNF volume fraction) is found to be at 0.057 vol %.

  18. Are nano-composites and nano-ionomers suitable for orthodontic bracket bonding?

    Uysal, Tancan; Yagci, Ahmet; Uysal, Banu; Akdogan, Gülsen

    2010-02-01

    The aim of this study was to test nano-composite (Filtek Supreme Plus Universal) and a newly introduced nano-ionomer (Ketac N100 Light Curing Nano-Ionomer) restorative to determine their shear bond strength (SBS) and failure site locations in comparison with a conventional light-cure orthodontic bonding adhesive (Transbond XT). Sixty freshly extracted human maxillary premolar teeth were arbitrarily divided into three equal groups. The brackets were bonded to the teeth in each group with different composites, according to the manufacturers' instructions. The SBS values of the brackets were recorded in Megapascals (MPa) using a universal testing machine. Adhesive remnant index scores were determined after failure of the brackets. The data were analysed using analysis of variance, Tukey honestly significant difference, and chi-square tests. The results demonstrated that group 1 (Transbond XT, mean: 12.60 +/- 4.48 MPa) had a higher SBS than that of group 2 (nano-composite, mean: 8.33 +/- 5.16 MPa; P nano-ionomer, mean: 6.14 +/- 2.12 MPa; P Nano-composites and nano-ionomers may be suitable for bonding since they fulfil the previously suggested SBS ranges for clinical acceptability, but they are inferior to a conventional orthodontic composite.

  19. Nano-structural characteristics and optical properties of silver chiral nano-flower sculptured thin films

    Savaloni, Hadi; Haydari-Nasab, Fatemh; Malmir, Mariam

    2011-01-01

    Silver chiral nano-flowers with 3-, 4- and 5-fold symmetry were produced using oblique angle deposition method in conjunction with the rotation of sample holder with different speeds at different sectors of each revolution corresponding to symmetry order of the acquired nano-flower. Atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM), were employed to obtain morphology and nano-structure of the films. Optical characteristics of silver chiral nano-flower thin films were obtained using single beam spectrophotometer with both s- and p-polarization incident light at 30 o and 70 o incidence angles and at different azimuthal angles (φ). Optical spectra showed both TM (TDM (transverse dipole mode) and TQM (transverse quadruple mode)) and LM (longitudinal mode) Plasmon resonance peaks. For 3- and 4-fold symmetry chiral nano-flowers the s-polarization extinction spectra obtained at different azimuthal angles did not show significant change in the Plasmon peak position while 5-fold symmetry chiral nano-flower showed a completely different behavior, which may be the result of increased surface anisotropy, so when the φ angle is changed the s-polarization response from the surface can change more significantly than that for lower symmetries. In general, for 3-, 4- and 5-fold symmetry chiral nano-flowers a sharp peak at lower wavelengths ( o incidence angle.

  20. Marinagarivorans algicola gen. nov., sp. nov., isolated from marine algae.

    Guo, Ling-Yun; Li, Dong-Qi; Sang, Jin; Chen, Guan-Jun; Du, Zong-Jun

    2016-03-01

    Two novel agar-degrading, Gram-stain-negative, motile, heterotrophic, facultatively anaerobic and pale yellow-pigmented bacterial strains, designated Z1 T and JL1, were isolated from marine algae Gelidium amansii (Lamouroux) and Gracilaria verrucosa , respectively. Growth of the isolates was optimal at 28-30 °C, pH 7.0-7.5 and with 2-3 % (w/v) NaCl. Both strains contained Q-8 as the sole respiratory quinone. The major cellular fatty acids in strain Z1 T were C 18 : 1 ω7 c , C 16 : 0 and summed feature 3 (C 16 : 1 ω7 c and/or iso-C 15 : 0 2-OH). The predominant polar lipids in strain Z1 T were phosphatidylethanolamine, phosphatidylglycerol and an aminolipid. The genomic DNA G+C content of both strains was 45.1 mol%. Strains Z1 T and JL1 were closely related, with 99.9 % 16S rRNA gene sequence similarity. The average nucleotide identity (ANI) value between strains Z1 T and JL1 was 99.3 %. Phylogenetic analysis based on 16S rRNA gene sequences revealed that strains Z1 T and JL1 form a distinct phyletic line within the class Gammaproteobacteria , with less than 92.3 % similarity to their closest relatives. Based on data from the current polyphasic study, the isolates are proposed to belong to a novel species of a new genus designated Marinagarivorans algicola gen. nov., sp. nov. The type strain of the type species is Z1 T ( = ATCC BAA-2617 T  = CICC 10859 T ).

  1. Rhabdobacter roseus gen. nov., sp. nov., isolated from soil.

    Dahal, Ram Hari; Kim, Jaisoo

    2016-01-01

    An aerobic, Gram-stain-negative, oxidase- and catalase-positive, non-motile, non-spore-forming, rod-shaped, pink-pigmented bacterium, designated strain R49T, was isolated from soil. Flexirubin-type pigments were absent. Phylogenetic analysis based on its 16S rRNA gene sequence revealed that strain R49T formed a lineage within the family Cytophagaceae of the phylum Bacteroidetes that was distinct from the most closely related genera Dyadobacter (91.98-93.85 % sequence similarity), Persicitalea (88.69 %) and Runella (84.79-85.81 %). The major isoprenoid quinone was menaquinone-7 (MK-7) and the major polar lipid was phosphatidylethanolamine. The major cellular fatty acids were summed feature 3 (C16 : 1ω7c and/or C16 : 1ω6c), iso-C15 : 0, C16 : 1ω5c, C16 : 0 and iso-C17 : 0 3-OH. The DNA G+C content of strain R49T was 53.9 mol%. On the basis of phenotypic, genotypic and phylogenetic analysis, strain R49T represents a novel species of a new genus in the family Cytophagaceae, for which the name Rhabdobacter roseus gen. nov., sp. nov. is proposed. The type strain of Rhabdobacter roseus is R49T ( = KEMB 9005-318T = KACC 18395T = JCM 30685T).

  2. Programa nacional de prevención y consejería genética del retinoblastoma mediante detección de mutaciones en el gen rb.

    Frayle, H.; Guevara, G.

    2011-01-01

    El retinoblastoma es un raro tumor ocular que se diagnostica en los niños, 40% de los casos se consideran hereditarios y 60% esporádicos. El modelo genético propuesto por Knudson involucra
    una la doble mutación inactivante del gen Rb, exclusivamente somática en los esporádicos y germinal más somática en los hereditarios. Esta investigacin tuvo como objetivo caracterizar las mutaciones en el gen Rb mediante secuenciación directa y evaluar su utilidad en la consejería genética....

  3. Scaling Laws for NanoFET Sensors

    Wei, Qi-Huo; Zhou, Fu-Shan

    2008-03-01

    In this paper, we report our numerical studies of the scaling laws for nanoplate field-effect transistor (FET) sensors by simplifying the nanoplates as random resistor networks. Nanowire/tube FETs are included as the limiting cases where the device width goes small. Computer simulations show that the field effect strength exerted by the binding molecules has significant impact on the scaling behaviors. When the field effect strength is small, nanoFETs have little size and shape dependence. In contrast, when the field-effect strength becomes stronger, there exists a lower detection threshold for charge accumulation FETs and an upper detection threshold for charge depletion FET sensors. At these thresholds, the nanoFET devices undergo a transition between low and large sensitivities. These thresholds may set the detection limits of nanoFET sensors. We propose to eliminate these detection thresholds by employing devices with very short source-drain distance and large width.

  4. Nano-optomechanics with optically levitated nanoparticles

    Neukirch, Levi P.; Vamivakas, A. Nick

    2015-01-01

    Nano-optomechanics is a vibrant area of research that continues to push the boundary of quantum science and measurement technology. Recently, it has been realised that the optical forces experienced by polarisable nanoparticles can provide a novel platform for nano-optomechanics with untethered mechanical oscillators. Remarkably, these oscillators are expected to exhibit quality factors approaching ?. The pronounced quality factors are a direct result of the mechanical oscillator being freed from a supporting substrate. This review provides an overview of the basic optical physics underpinning optical trapping and optical levitation experiments, it discusses a number of experimental approaches to optical trapping and finally outlines possible applications of this nano-optomechanics modality in hybrid quantum systems and nanoscale optical metrology.

  5. Replication of micro and nano surface geometries

    Hansen, Hans Nørgaard; Hocken, R.J.; Tosello, Guido

    2011-01-01

    The paper describes the state-of-the-art in replication of surface texture and topography at micro and nano scale. The description includes replication of surfaces in polymers, metals and glass. Three different main technological areas enabled by surface replication processes are presented......: manufacture of net-shape micro/nano surfaces, tooling (i.e. master making), and surface quality control (metrology, inspection). Replication processes and methods as well as the metrology of surfaces to determine the degree of replication are presented and classified. Examples from various application areas...... are given including replication for surface texture measurements, surface roughness standards, manufacture of micro and nano structured functional surfaces, replicated surfaces for optical applications (e.g. optical gratings), and process chains based on combinations of repeated surface replication steps....

  6. Electromagnetics of active coated nano-particles

    Arslanagic, Samel

    2013-01-01

    This work reviews the fundamental properties of several spherical and cylindrical active coated nano-particles excited by their respective single and/or multiple sources of radiation at optical frequencies. Particular attention is devoted to the influence of the source location and orientation, t......, the optical gain constant and the nano-particle material composition on the electric and magnetic near fields, the power flow density, the radiated power as well as the directivities. Resonant as well as quasi-transparent states will be emphasized in the discussion.......This work reviews the fundamental properties of several spherical and cylindrical active coated nano-particles excited by their respective single and/or multiple sources of radiation at optical frequencies. Particular attention is devoted to the influence of the source location and orientation...

  7. Genética em transtornos alimentares: ampliando os horizontes de pesquisa

    Pinheiro Andréa Poyastro

    2006-01-01

    Full Text Available OBJETIVO: Revisar a literatura atual concernente à pesquisa genética em transtornos do comportamento alimentar e discutir questões relevantes ao desenvolvimento de um projeto de pesquisa genética nessa área no Brasil. MÉTODO: A revisão realizada utilizou a base de dados Medline, no período de 1984 a maio de 2005, com os seguintes termos de busca: "anorexia nervosa", "bulimia nervosa", "eating disorders", "binge eating disorder", "family studies", "twin studies", "molecular genetics studies". RESULTADOS: Os dados atuais apontam para uma contribuição relevante dos fatores genéticos na suscetibilidade à anorexia e à bulimia nervosa. A pesquisa genética com populações miscigenadas deve levar em consideração o tamanho da amostra, a densidade de genotipagem e a estratificação populacional. Através de "admixture mapping" é possível estimar a estrutura genética destas populações e localizar genes relacionados à variação étnica de doenças ou traços de interesse. CONCLUSÕES: O desenvolvimento de uma grande iniciativa de colaboração em genética de transtornos alimentares no Brasil e na América Latina viabilizará estudar os fatores genéticos em transtornos do comportamento alimentar no contexto de grupos inter-étnicos, e integrar uma nova perspectiva biológica à etiologia destes distúrbios.

  8. Salud pública, genética y ética

    Kottow Miguel H

    2002-01-01

    Full Text Available La investigación genética ha tenido una enorme expansión en recientes décadas, con repercusiones terapéuticas aún inciertas. El análisis bioético tradicional de las complejas prácticas genéticas ha sido insuficiente por sostenerse en la ética de la investigación y en la bioética de corte principialista. Los problemas éticos más importantes de la genética son de orden colectivo y deben ser abordados por una reflexión ético-social cuyo enfoque es más amplio que la agenda interpersonal del principialismo. Temas como exploraciones genéticas, cuestiones patrimoniales, manipulación génica y asignación de recursos, deben todos ser sometidos a un pensamiento inspirado en los requerimientos de la ciudadanía, en el bien común y en la definición del rol del Estado en fiscalizar actividades genéticas y en proteger a la población. El objetivo del estudio es mostrar cómo el amplio campo de la ética y de la genética tiene una mayor relevancia en el campo social que en el clínico. El objetivo del trabajo es señalar que la bioética principialista ha enfatizado los problemas éticos individuales que nacen con la intervención genética, a costa de marginar sus importantes repercusiones sociales.

  9. Salud pública, genética y ética

    Miguel H Kottow

    2002-10-01

    Full Text Available La investigación genética ha tenido una enorme expansión en recientes décadas, con repercusiones terapéuticas aún inciertas. El análisis bioético tradicional de las complejas prácticas genéticas ha sido insuficiente por sostenerse en la ética de la investigación y en la bioética de corte principialista. Los problemas éticos más importantes de la genética son de orden colectivo y deben ser abordados por una reflexión ético-social cuyo enfoque es más amplio que la agenda interpersonal del principialismo. Temas como exploraciones genéticas, cuestiones patrimoniales, manipulación génica y asignación de recursos, deben todos ser sometidos a un pensamiento inspirado en los requerimientos de la ciudadanía, en el bien común y en la definición del rol del Estado en fiscalizar actividades genéticas y en proteger a la población. El objetivo del estudio es mostrar cómo el amplio campo de la ética y de la genética tiene una mayor relevancia en el campo social que en el clínico. El objetivo del trabajo es señalar que la bioética principialista ha enfatizado los problemas éticos individuales que nacen con la intervención genética, a costa de marginar sus importantes repercusiones sociales.

  10. Mejoramiento genético acelerado de angiospermas perennes vía inducción floral por sobre-expresión del gen FT

    Rafael Urrea López

    2018-05-01

    Full Text Available Los bosques y selvas enfrentan el reto de satisfacer la demanda por recursos de una población en crecimiento, así como la amenaza del rápido cambio climático que exacerba la magnitud y frecuencia de estreses bióticos y abióticos. Para ello, es urgente acelerar el mejoramiento genético de especies forestales. Sin embargo, sus largas etapas juveniles y asincronía floral retrasan peligrosamente este proceso. El presente ensayo explora los adelantos biotecnológicos en inducción floral y su potencial aplicación en especies forestales. Entre los genes identificados y caracterizados que participan en la ruta de señalización de la floración, especial atención se destina al gen FLOWERING LOCUS T, considerado un integrador de rutas de señalización altamente conservado entre las angiospermas, que, al sobre-expresarse por ingeniería genética, es capaz de inducir la floración de forma eficiente. Esta novedosa estrategia biotecnológica se ha utilizado, recientemente, para segregar genes de resistencia a enfermedades, en un menor tiempo, en germoplasma comercial de manzana y ciruela. Permite soslayar barreras naturales que por mucho tiempo han restringido a las especies forestales al mejoramiento por selección, principalmente. Entre sus ventajas está la de poder restringirla al proceso y no al producto, para acelerar las cruzas sexuales sin modificar genéticamente la progenie; se aleja así de la controversia alrededor de la liberación y consumo de organismos genéticamente modificados, y de los costos y trámites obligatorios para los OGM para monitoreo de posibles riesgos. Se proyecta como una tecnología que puede acelerar, significativamente, el mejoramiento de especies forestales.

  11. Nano materials Synthesis, Applications, and Toxicity 2012

    Nadagouda, M.N.; Lytle, D.A.; Speth, Th.F.; Dionysiou, D.D.; Mukhopadhyay, Sh.M.

    2013-01-01

    Nano technology presents new opportunities to create better materials and products. Nano materials find wide applications in catalysis, energy production, medicine, environmental remediation, automotive industry, and other sectors of our society. Nano material-containing products are already available globally and include automotive parts, defense application, drug delivery devices, coatings, computers, clothing, cosmetics, sports equipment, and medical devices. This special issue includes emerging advances in the field, with a special emphasis given to nano material synthesis and applications. There is an increasing interest in identifying magnetically separable catalysts for the degradation of wastewater. In this issue, A. Perumal et al. report an investigation of temperature-dependent magnetic properties and photo catalytic activity of CoFe 2 O 4 -Fe 3 O 4 magnetic nano composites (MNCs) synthesized by hydrothermal processes. These MNCs have saturation magnetization of 90 emu/g and coercivity (HC) of 530 Oe. The photo catalytic activity of the MNCs has been examined on the reduction of methyl orange (MO), a colored compound used in dyeing and printing textiles. The MNCs act as an excellent photo catalyst on the degradation of organic contaminants and degrade 93% of MO in 5 hours of UV irradiation. The photo catalytic activity of MNCs is attributed to remarkably high band gap energy and small particle size. Also, the MNCs with reproducible photo catalytic activity are easily separated from water media by applying an external magnetic field and they act as a promising catalyst for the remediation of textile wastewater. Microwaves can play an important role in orchestrating nano materials for a wide range of technological applications

  12. Self-aligned periodic Ni nano dots embedded in nano-oxide layer

    Doi, M.; Izumi, M.; Kawasaki, S.; Miyake, K.; Sahashi, M.

    2007-01-01

    The Ni nano constriction dots embedded in the Ta-nano-oxide layer (NOL) was prepared by the ion beam sputtering (IBS) method. After the various conditions of the oxidations, the structural analyses of the NOL were performed by RHEED, AES and in situ STM/AFM observations. From the current image of the conductive AFM for NOL, the periodically aligned metallic dots with the size around 5-10 nm were successfully observed. The mechanism of the formation of the self-organized aligned Ni nano constriction dots is discussed from the standpoint of the grain size, the crystal orientation, the preferred oxidation of Ta at the diffused interface

  13. Nano-sensing of the orientation of fluorescing molecules with active coated nano-particles

    Arslanagic, Samel; Ziolkowski, Richard W.

    2015-01-01

    The potential of using active coated nano-particles to determine the orientation of fluorescing molecules is reported. By treating each fluorescing molecule as an electric Hertzian dipole, single and multiple fluorescing molecules emitting coherently and incoherently in various orientations...... are considered in the presence of active coated nano-particles. It is demonstrated that in addition to offering a means to determine the orientation of a single molecule or the over-all orientation of the molecules surrounding it, the nature of the far-field response from the active coated nano...

  14. Selective and lithography-independent fabrication of 20 nm nano-gap electrodes and nano-channels for nanoelectrofluidics applications

    Zhang, J Y; Wang, X F; Wang, X D; Fan, Z C; Li, Y; Ji, An; Yang, F H

    2010-01-01

    A new method has been developed to selectively fabricate nano-gap electrodes and nano-channels by conventional lithography. Based on a sacrificial spacer process, we have successfully obtained sub-100-nm nano-gap electrodes and nano-channels and further reduced the dimensions to 20 nm by shrinking the sacrificial spacer size. Our method shows good selectivity between nano-gap electrodes and nano-channels due to different sacrificial spacer etch conditions. There is no length limit for the nano-gap electrode and the nano-channel. The method reported in this paper also allows for wafer scale fabrication, high throughput, low cost, and good compatibility with modern semiconductor technology.

  15. Rapid fabrication of an ordered nano-dot array by the combination of nano-plastic forming and annealing methods

    Yoshino, Masahiko; Ohsawa, Hiroki; Yamanaka, Akinori

    2011-01-01

    In this paper, a new fabrication method for an ordered nano-dot array is developed. Combination of coating, nano-plastic forming and annealing processes is studied to produce uniformly sized and ordered gold nano-dot array on a quartz glass substrate. The experimental results reveal that patterning of a groove grid on the gold-coated substrate with NPF is effective to obtain the ordered gold nano-dot array. In the proposed fabrication process, the size of the gold nano-dot can be controlled by adjusting the groove grid size. A minimum gold nano-dot array fabricated on a quartz-glass substrate was 93 nm in diameter and 100 nm in pitch. Furthermore, the mechanism of nano-dot array generation by the presented process is investigated. Using a theoretical model it is revealed that the proposed method is capable of fabrication of smaller nano-dots than 10 nm by controlling process conditions adequately.

  16. X-diffraction technique applied for nano system metrology

    Kuznetsov, Alexei Yu.; Machado, Rogerio; Robertis, Eveline de; Campos, Andrea P.C.; Archanjo, Braulio S.; Gomes, Lincoln S.; Achete, Carlos A.

    2009-01-01

    The application of nano materials are fast growing in all industrial sectors, with a strong necessity in nano metrology and normalizing in the nano material area. The great potential of the X-ray diffraction technique in this field is illustrated at the example of metals, metal oxides and pharmaceuticals

  17. Security in Nano Communication: Challenges and Open Research Issues

    Dressler, Falko; Kargl, Frank

    Nano communication is one of the fastest growing emerging research fields. In recent years, much progress has been achieved in developing nano machines supporting our needs in health care and other scenarios. However, experts agree that only the interaction among nano machines allows to address the

  18. Fabrication of nano piezoelectric based vibration accelerometer for mechanical sensing

    Murugan, S.; Prasad, M. V. N.; Jayakumar, K.

    2016-05-01

    An electromechanical sensor unit has been fabricated using nano PZT embedded in PVDF polymer. Such a polymer nano composite has been used as vibration sensor element and sensitivity, detection of mechanical vibration, and linearity measurements have been investigated. It is found from its performance, that this nano composite sensor is suitable for mechanical sensing applications.

  19. Synthesise of Zn O nano wires by direct oxidation method

    Farbod, M.; Ahangarpour, A.

    2007-01-01

    Zn O is a semiconductor which has a direct and wide energy band which is about 3.37 eV at room temperature. It has various applications from UV lasers, sensitive sensors, solar cells to photo catalysis applications. Zn O has different nano structures such as nanoparticles, nano wires, nano rods, nano tubes and nano belts. The one dimensional Zn O nano structures such as nano wires are very important because of their applications in nano electronics and nano photonics so different methods have been proposed to synthesize them. In this work large scale of Zn O nano wires are produced by direct oxidation a Zn substrate (which was cleaned by chemical methods) in air or oxygen atmosphere at 400 d eg C . Nano wires were investigated by scanning electron microscopy and energy dispersive x-ray measurements. Their diameter is about 30-150 nanometer and their length is about several micrometer. This method which acts without any catalyst is a convenient method to synthesis semiconductor nano wires.

  20. Topology optimization of nano-photonic systems

    Elesin, Yuriy; Wang, Fengwen; Andkjær, Jacob Anders

    2012-01-01

    We describe recent developments within nano-photonic systems design based on topology optimization. Applications include linear and non-linear optical waveguides, slow-light waveguides, as well as all-dielectric cloaks that minimize scattering or back-scattering from hard obstacles.......We describe recent developments within nano-photonic systems design based on topology optimization. Applications include linear and non-linear optical waveguides, slow-light waveguides, as well as all-dielectric cloaks that minimize scattering or back-scattering from hard obstacles....

  1. Emerging areas of Nano and Smart Materials

    Partha Ghosal

    2016-01-01

    ‘There’s plenty of room at the bottom’ – In 1959, one of the most brilliant physicists the world has ever seen, Richard P. Feynmann, gave us a beautiful introduction to nano-science. Today, after almost seven decades, nano-materials and related technologies are not just a simple extension of regular research and miniaturisation of materials, but have become the prime driver of advancement in science and technology all over the world. Over the past few decades, new societal requirement haveeme...

  2. Nano-material and method of fabrication

    Menchhofer, Paul A; Seals, Roland D; Howe, Jane Y; Wang, Wei

    2015-02-03

    A fluffy nano-material and method of manufacture are described. At 2000.times. magnification the fluffy nanomaterial has the appearance of raw, uncarded wool, with individual fiber lengths ranging from approximately four microns to twenty microns. Powder-based nanocatalysts are dispersed in the fluffy nanomaterial. The production of fluffy nanomaterial typically involves flowing about 125 cc/min of organic vapor at a pressure of about 400 torr over powder-based nano-catalysts for a period of time that may range from approximately thirty minutes to twenty-four hours.

  3. Measurement capability overview in PolyNano

    Calaon, Matteo; Tosello, Guido; Hansen, Hans Nørgaard

    2012-01-01

    A measurement capability overview has been conducted to evaluate, among the most used instruments in the field of nanometrology, where the PolyNano project should focus its research. The deliverable presents the most relevant instruments to achieve the best possible measurements accuracy matching...... requirements such as low uncertainty, high repeatability and resolution, adequate measuring range and availability among the different project partners. Based on the present measurement capability overview and in relation to the objective of PolyNano to “remove the technology barrier between lab‐scale proof...

  4. Gel nano-particulates against radioactivity

    Deroin, Ph.

    2004-01-01

    The Argonne research center (USA) has developed a 'super-gel' compound, a polymer close to those used in baby's diapers, which can reach a 90% efficiency in the radioactive decontamination of porous materials, like bricks or concrete. The contaminated materials are sprayed with a mixture of polymer gel and wetting agent with nano-particulates in suspension. Under the action of the wetting agent, radioactivity migrates from the pores to the gel and is trapped by the nano-particulates. The drying and recycling of the gel allows to reduce the volume of radioactive wastes. Short paper. (J.S.)

  5. Magnetic bead detection using nano-transformers

    Kim, Hyung Kwon; Ahn, Doyeol [Institute of Quantum Information Processing and Systems, University of Seoul, 90 Jeonnong, Dongdaemun, Seoul 130-743 (Korea, Republic of); Hwang, Jong Seung; Hwang, Sung Woo, E-mail: dahn@uos.ac.kr [Research Center for Time-domain Nano-functional Devices and School of Electrical Engineering, Korea University, 5-1 Anam, Sungbuk, Seoul 136-701 (Korea, Republic of)

    2010-11-19

    A novel scheme to detect magnetic beads using a nano-scale transformer with a femtoweber resolution is reported. We have performed a Faraday's induction experiment with the nano-transformer at room temperature. The transformer shows the linear output voltage responses to the sinusoidal input current. When magnetic beads are placed on the transformer, the output responses are increased by an amount corresponding to the added magnetic flux from the beads when compared with the case of no beads on the transformer. In this way, we could determine whether magnetic beads are on top of the transformer in a single particle level.

  6. Magnetic bead detection using nano-transformers.

    Kim, Hyung Kwon; Hwang, Jong Seung; Hwang, Sung Woo; Ahn, Doyeol

    2010-11-19

    A novel scheme to detect magnetic beads using a nano-scale transformer with a femtoweber resolution is reported. We have performed a Faraday's induction experiment with the nano-transformer at room temperature. The transformer shows the linear output voltage responses to the sinusoidal input current. When magnetic beads are placed on the transformer, the output responses are increased by an amount corresponding to the added magnetic flux from the beads when compared with the case of no beads on the transformer. In this way, we could determine whether magnetic beads are on top of the transformer in a single particle level.

  7. Olefin metathesis in nano-sized systems

    Denise Méry

    2011-01-01

    Full Text Available The interplay between olefin metathesis and dendrimers and other nano systems is addressed in this mini review mostly based on the authors’ own contributions over the last decade. Two subjects are presented and discussed: (i The catalysis of olefin metathesis by dendritic nano-catalysts via either covalent attachment (ROMP or, more usefully, dendrimer encapsulation – ring closing metathesis (RCM, cross metathesis (CM, enyne metathesis reactions (EYM – for reactions in water without a co-solvent and (ii construction and functionalization of dendrimers by CM reactions.

  8. Improved nano-particle tracking analysis

    Walker, John G

    2012-01-01

    Nano-particle tracking is a method to estimate a particle size distribution by tracking the movements of individual particles, using multiple images of particles moving under Brownian motion. A novel method to recover a particle size distribution from nano-particle tracking data is described. Unlike a simple histogram-based method, the method described is able to account for the finite number of steps in each particle track and consequently for the measurement uncertainty in the step-length data. Computer simulation and experimental results are presented to demonstrate the performance of the approach compared with the current method. (paper)

  9. Desensitizing nano powders to electrostatic discharge ignition

    Steelman, Ryan; Daniels, Michael A.

    2015-01-01

    Electrostatic discharge (ESD) is a main cause for ignition in powder media ranging from grain silos to fireworks. Nanoscale particles are orders of magnitude more ESD ignition sensitive than their micron scale counterparts. This study shows that at least 13 vol. % carbon nanotubes (CNT) added to nano-aluminum and nano-copper oxide particles (nAl + CuO) eliminates ESD ignition sensitivity. The CNT act as a conduit for electric energy and directs electric charge through the powder to desensitize the reactive mixture to ignition. For nanoparticles, the required CNT concentration for desensitizing ESD ignition acts as a diluent to quench energy propagation.

  10. The Effect of Nano Loading and Ultrasonic Compounding of EVA/LDPE/Nano-magnesium Hydroxide on Mechanical Properties and Distribution of Nano Particles

    Azman, I. A.; Salleh, R. M.; Alauddin, S. M.; Shueb, M. I.

    2018-05-01

    Blends of Ethylene Vinyl Acetate (EVA) and Low-Density Polyethylene (LDPE) are promising composite which have good mechanical properties to environmental stress cracking. However, they lack fire resistant properties, which limits it usage in wire and cable industry. In order to improve flame retardancy ability, a range of nano-magnesium hydroxide (nano-MH) loading which is from 0 phr to maximum of 20 phr with ultrasonic extrusion 0-100 kHz frequencies have been introduced. Ultrasonic extrusion was used to improve the distribution of nano-MH. It was found that, 10 phr of nano loading with 100 kHz ultrasonic assisted has greater tensile strength compared to the nanocomposite without ultrasonication. Further increase of nano MH loading, will decrease the tensile properties. Better elongation at break was observed at10 phr nano-MH with the frequency of 50 kHz. The sample of 20 phr of nanoMH assisted with 50 kHz ultrasonic exhibits good flexural properties while 10 phr of nano-MH without the ultrasonic assisted demonstrates good in izod impact properties. From the evaluation of mechanical properties studied, it was found that 10 phr of nano-MH has shown the best performance among all the samples tested for EVA/LDPE/nano-MH composites. Transmission Electron Microscopy (TEM) has been conducted on 10 phr sample with different frequencies in order to observe the distribution of nano-MH particles. The sample with 100 kHz frequency shows more uniform dispersion of nano-MH in EVA/LDPE composites. This investigation indicates that the ultrasonic technology can enhance the mechanical properties studied as well as the dispersion of nano particles in the composite.

  11. Biometria e armazenamento de sementes de genótipos de cacaueiro

    Lucimara Ribeiro Venial

    2017-03-01

    Full Text Available Genótipos de Theobroma cacao L. devem ser melhor estudados, para se identificar aqueles que produzem sementes mais desenvolvidas e viáveis após o armazenamento. Objetivou-se com este trabalho estudar a biometria e dois tempos de armazenamento de sementes de genótipos de cacaueiro. A biometria foi avaliada em oito genótipos de cacaueiro (tratamentos. Foram instalados testes de germinação em delineamento inteiramente ao acaso, no esquema fatorial 8 x 2 (genótipos: CCN51, PH16, CEPEC2002, Ipiranga, SJ02, PS1319, TSH1188 e Comum x dois períodos de armazenamento: 0 e dois dias. O genótipo TSH1188 apresentou maior comprimento, relação comprimento/largura, espessura e massa de 100 sementes. A absorção de água das sementes recém-colhidas dos genótipos é lenta, justificada pelos altos teores de água, o que não caracteriza padrão-trifásico. Os teores de água reduziram em média 2,3 vezes nas sementes armazenadas em relação às recém-colhidas. A germinação das sementes recém-colhidas dos genótipos foi de 100%. Após o armazenamento, as sementes do PS1319 apresentaram a menor redução da germinação (39%, enquanto as dos PH16, CEPEC2002 e SJ02 reduziram 96%. A velocidade de germinação foi maior e o tempo médio menor que dois dias nas sementes recém-colhidas do PS1319, indicando serem mais tolerante à dessecação. Sugere-se o uso dos genótipos TSH1188 e PS1319 em programas de melhoramento genético.

  12. Electrode fabrication for Lithium-ion batteries by intercalating of carbon nano tubes inside nano metric pores of silver foam

    Khoshnevisan, B.

    2011-01-01

    Here there is an on effort to improve working electrode (Ag + carbon nano tubes) preparation for Li-Ion batteries applications. Nano scaled silver foam with high specific area has been employed as a frame for loading carbon nano tubes by electrophoretic deposition method. In this ground, the prepared electrodes show a very good stability and also charge-discharge cycles reversibility.

  13. GenMAPP 2: new features and resources for pathway analysis

    Dahlquist Kam D

    2007-06-01

    Full Text Available Abstract Background Microarray technologies have evolved rapidly, enabling biologists to quantify genome-wide levels of gene expression, alternative splicing, and sequence variations for a variety of species. Analyzing and displaying these data present a significant challenge. Pathway-based approaches for analyzing microarray data have proven useful for presenting data and for generating testable hypotheses. Results To address the growing needs of the microarray community we have released version 2 of Gene Map Annotator and Pathway Profiler (GenMAPP, a new GenMAPP database schema, and integrated resources for pathway analysis. We have redesigned the GenMAPP database to support multiple gene annotations and species as well as custom species database creation for a potentially unlimited number of species. We have expanded our pathway resources by utilizing homology information to translate pathway content between species and extending existing pathways with data derived from conserved protein interactions and coexpression. We have implemented a new mode of data visualization to support analysis of complex data, including time-course, single nucleotide polymorphism (SNP, and splicing. GenMAPP version 2 also offers innovative ways to display and share data by incorporating HTML export of analyses for entire sets of pathways as organized web pages. Conclusion GenMAPP version 2 provides a means to rapidly interrogate complex experimental data for pathway-level changes in a diverse range of organisms.

  14. Manipulación genética de seres humanos

    Manuel Santos Alcántara

    2006-08-01

    Full Text Available El gran avance que ha tenido la Genética en los últimos años y, particularmente, aquello relacionado con el desciframiento del genoma humano, ha traído a la discusión pública la posibilidad concreta de manipular genéticamente a los seres humanos. El mejoramiento o perfeccionamiento genético de los seres humanos, denominado eugenesia, actualmente se ha convertido técnicamente en una realidad, motivando una profunda reflexión de tipo ético. La pregunta básica es la siguiente: aquello que es técnicamente posible de realizar ¿es ético hacerlo? ¿Tienen derecho los padres a acceder a la tecnología genética para mejorar las características de sus hijos? En este artículo se revisan las bases científicas del mejoramiento genético de los seres humanos, y se plantean los cuestionamientos éticos más relevantes derivados de esta manipulación.

  15. Contribuciones de Sir Roland Fisher a la Estadística Genética

    Jaime Cuadros

    2004-11-01

    Full Text Available Sir Ronald Fisher (18901962 fue profesor de genética y muchas de sus innovaciones estadísticas encontraron expresión en el desarrollo de metodología en estadística genética. Sin embargo, mientras sus contribuciones en estadística matemática son fácilmente identificadas, en genética de poblaciones compartió su supremacía con Sewall Wright (1889 1988 y J. S. S. Haldane (1892 1965. Este documento muestra algunas de las mejores contribuciones de Fisher a las bases de la estadística genética, y sus interacciones con Wright y Haldane, los cuales contribuyeron al desarrollo del tema. Con la tecnología moderna, tanto la metodología la estadística como la información genética están cambiando. No obstante, muchos de los trabajos de Fisher permanecen relevantes, y pueden aun servir como una base para investigaciones futuras en el análisis estadístico de datos de DNA. El trabajo de este autor refleja su visión del papel de Ia estadística en Ia inferencia científica expresada en 1949

  16. 76 FR 59171 - Notice of Opportunity To File Amicus Briefs

    2011-09-23

    ... violate an employee's constitutional right to due process in this regard, how should the Board analyze... due process with respect to the employee's constitutionally protected property interest in employment... deprives him of his property right in his employment constitutes an abridgement of his constitutional right...

  17. 78 FR 17233 - Notice of Opportunity To File Amicus Briefs

    2013-03-20

    .... See Bohac v. Department of Agriculture, 239 F.3d 1334, 1337-43 (Fed. Cir. 2001). However, under.... Any commonly-used word processing format or PDF format is acceptable; text formats are preferable to image formats. Briefs may also be filed with the Office of the Clerk of the Board, Merit Systems...

  18. 76 FR 44373 - Notice of Opportunity To File Amicus Briefs

    2011-07-25

    ... 353.301(d). See generally Drumheller v. Department of the Army, 49 F.3d 1566, 1574 (Fed. Cir. 1995... ``are designed to accommodate injured employees who are temporarily unable to perform their regular... individuals to perform consistent with their medical restrictions. Latham v. U.S. Postal Service, MSPB Docket...

  19. Divergencia genética en poblaciones peruanas detectada a partir de las frecuencias haplotípicas del mtDNA y del gen nuclear MBL

    Jesús H. Córdova

    2011-01-01

    Full Text Available Objetivos: Avanzar en el conocimiento del origen de las poblaciones peruanas estudiadas en un contexto filogeográfico. Diseño: Estudio genético poblacional. Instituciones: Laboratorio de Genética Humana, Facultad de Ciencias Biológicas, Universidad Nacional Mayor de San Marcos, e Instituto de Genética y Biología Molecular, Facultad de Medicina, Universidad San Martín de Porras, Lima, Perú. Participantes: Siete poblaciones peruanas. Metodología: Análisis comparativo de los resultados a partir del estudio del mtDNA y el gen nuclear MBL de siete poblaciones peruanas, procesados de manera separada y luego combinados, utilizando el programa PHYLYP 3.65, para obtener valores FST de diferenciación genética y la construcción de árboles de distancias por aplicación del algorritmo UPGMA y el análisis subsecuente de los agrupamientos (clusters generados. Principales medidas de resultados: Árboles genéticos generados. Resultados: De manera separada, los árboles generados para cada marcador genético tuvieron topologías propias y diferentes entre sí. Procesados de manera combinada, el árbol resultante demostró que los mayores valores de diferenciación genética se hallaron en las Islas del Lago Titicaca (Puno, Perú conocidas -Taquile, Amantani y Anapia-, que fue calificada como muy alta, porque mostró valores de FST de 0.3113, 0.2949 y 0.3348 respecto de las poblaciones estudiadas, tanto fuera del Departamento de Puno -como Chachapoyas, Pucallpa y Chiclayo, respectivamente-, así como a la de los Uro del mismo Puno y del mismo Lago Titicaca (0.2837. Fuera de Puno, el par de poblaciones Chachapoyas-Pucallpa fue el menos divergente, al alcanzar entre ellas un valor de FST de 0.0108, calificándosele de pequeña. Conclusiones: El árbol obtenido del procesamiento de los marcadores vía una matriz combinada demostró que las poblaciones que habitan las islas de Taquile, Amantani y Anapia, divergen notablemente de las restantes cuatro

  20. Estudio molecular del gen MLL en 30 pacientes con leucemias agudas Molecular study of MLL gen in 30 patients with acute leukemias

    Raquel Levón Herrera

    2000-04-01

    Full Text Available Los reordenamientos del gen MLL en la banda cromosómica 11q23 son frecuentes en leucemias agudas (LA en niños y en las LA secundarias desarrolladas después de la terapia con inhibidores de la enzima topoisomerasa II. En menor medida también se aprecia en adultos con LA. La presencia de estos reordenamientos se considera un indicador de mal pronóstico asociado con resultados clínicos desfavorables, por ello es muy importante realizar su determinación en las LA. En este trabajo mostramos los resultados preliminares de la introducción del estudio del gen MLL en nuestro país mediante la técnica de Southern. Analizamos ADN de 30 pacientes con LA, incluidos niños y adultos, que en el momento del estudio se encontraban al debut o en recaída. El estudio molecular se realizó con la sonda FA4, que es un inserto genómico del gen MLL. Sólo uno de los 30 pacientes mostró bandas de reordenamiento con 2 enzimas de restricción diferentes, el resto mostró el gen MLL en configuración germinal. Es interesante destacar que el paciente con el reordenamiento era un niño con leucemia mieloblástica aguda subtipo M5b, lo cual concuerda con la literatura, donde se describe que estos reordenamientos están estrechamente correlacionados con los subtipos mielomonocítico (M4 y monocítico (M5 de leucemia mieloide aguda (LMARearrangements of MLL gen in llq23 chromosomal band are frequents in childhood type of acute leukemia (AL and in secondary AL, developed after therapy with II topoisomerase enzyme. To a lesser extent also is seen in adults with AL. Presence of theses rearrangements is considered to be a worse prognosis indicator, associated with unfavourable clinical results, that is why it is very important to carry our its assessment in AL. In this paper authors present preliminary results from introduction of study on MLL gen in our country through Southern technique. DNA from 30 patients was analized, including children and adults, that at the

  1. Plasmonic graded nano-disks as nano-optical conveyor belt.

    Kang, Zhiwen; Lu, Haifei; Chen, Jiajie; Chen, Kun; Xu, Fang; Ho, Ho-Pui

    2014-08-11

    We propose a plasmonic system consisting of nano-disks (NDs) with graded diameters for the realization of nano-optical conveyor belt. The system contains a couple of NDs with individual elements coded with different resonant wavelengths. By sequentially switching the wavelength and polarization of the excitation source, optically trapped target nano-particle can be transferred from one ND to another. The feasibility of such function is verified based on the three-dimensional finite-difference time-domain technique and the Maxwell stress tensor method. Our design may provide an alternative way to construct nano-optical conveyor belt with which target molecules can be delivered between trapping sites, thus enabling many on-chip optofluidic applications.

  2. Report of International NanoSPD Steering Committee and statistics on recent NanoSPD activities

    Valiev, R Z; Langdon, T G

    2014-01-01

    Abstract. The Université de Lorraine in Metz, France, is the selected site for the 6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD6) following a series of five earlier conferences. This introductory paper reports on several major developments in NanoSPD activities as well as on very recent NanoSPD citation data which confirm the continued growth and expansion of this important research area. Close attention is given to the topics of workshops, conferences and seminars organized during these last three years as well as on books and reviews published prior to the NanoSPD6 conference. A special concern of the committee is in introducing and discussing the appropriate terminology to be applied in this new field of materials science and engineering

  3. Reactive oxygen species-related activities of nano-iron metal and nano-iron oxides.

    Wu, Haohao; Yin, Jun-Jie; Wamer, Wayne G; Zeng, Mingyong; Lo, Y Martin

    2014-03-01

    Nano-iron metal and nano-iron oxides are among the most widely used engineered and naturally occurring nanostructures, and the increasing incidence of biological exposure to these nanostructures has raised concerns about their biotoxicity. Reactive oxygen species (ROS)-induced oxidative stress is one of the most accepted toxic mechanisms and, in the past decades, considerable efforts have been made to investigate the ROS-related activities of iron nanostructures. In this review, we summarize activities of nano-iron metal and nano-iron oxides in ROS-related redox processes, addressing in detail the known homogeneous and heterogeneous redox mechanisms involved in these processes, intrinsic ROS-related properties of iron nanostructures (chemical composition, particle size, and crystalline phase), and ROS-related bio-microenvironmental factors, including physiological pH and buffers, biogenic reducing agents, and other organic substances. Copyright © 2014. Published by Elsevier B.V.

  4. TRANSFORMATIONS IN NANO-DIAMONDS WITH FORMATION OF NANO-POROUS SILICON CARBIDE AT HIGH PRESSURE

    V. N. Kovalevsky

    2010-01-01

    Full Text Available The paper contains investigations on regularities of diamond - silicon carbide composite structure formation at impact-wave excitation. It has been determined that while squeezing a porous blank containing Si (SiC nano-diamond by explosive detonation products some processes are taking place such as diamond nano-particles consolidation, reverse diamond transition into graphite, fragments formation from silicon carbide. A method for obtaining high-porous composites with the presence of ultra-disperse diamond particles has been developed. Material with three-dimensional high-porous silicon-carbide structure has been received due to nano-diamond graphitation at impact wave transmission and plastic deformation. The paper reveals nano-diamonds inverse transformation into graphite and its subsequent interaction with the silicon accompanied by formation of silicon-carbide fragments with dimensions of up to 100 nm.

  5. Every which way – nanos gene regulation in echinoderms

    Oulhen, Nathalie; Wessel, Gary M.

    2014-01-01

    Nanos is an essential factor of germ line success in all animals tested. This gene encodes a Zn-finger RNA-binding protein that in complex with its partner pumilio, binds to and changes the fate of several known transcripts. We summarize here the documented functions of nanos in several key organisms, and then emphasize echinoderms as a working model for how nanos expression is regulated. Nanos presence outside of the target cells is often detrimental to the animal, and in sea urchins, nanos ...

  6. Every which way – nanos gene regulation in echinoderms

    Oulhen, Nathalie; Wessel, Gary M.

    2014-01-01

    Nanos is an essential factor of germ line success in all animals tested. This gene encodes a Zn-finger RNA-binding protein that in complex with its partner pumilio, binds to and changes the fate of several known transcripts. We summarize here the documented functions of nanos in several key organisms, and then emphasize echinoderms as a working model for how nanos expression is regulated. Nanos presence outside of the target cells is often detrimental to the animal, and in sea urchins, nanos expression appears to be regulated at every step of transcription, and post-transcriptional activity, making this gene product exciting, every which way. PMID:24376110

  7. Lifetime of Nano-Structured Black Silicon for Photovoltaic Applications

    Plakhotnyuk, Maksym; Davidsen, Rasmus Schmidt; Schmidt, Michael Stenbæk

    2016-01-01

    In this work, we present recent results of lifetime optimization for nano-structured black silicon and its photovoltaic applications. Black silicon nano-structures provide significant reduction of silicon surface reflection due to highly corrugated nanostructures with excellent light trapping pro......, respectively. This is promising for use of black silicon RIE nano-structuring in a solar cell process flow......In this work, we present recent results of lifetime optimization for nano-structured black silicon and its photovoltaic applications. Black silicon nano-structures provide significant reduction of silicon surface reflection due to highly corrugated nanostructures with excellent light trapping...

  8. Functionally Graded Materials using Plasma Spray with Nano Structured Ceramic

    Sioh, E L; Tok, A I Y

    2013-01-01

    In this paper, nano structured FGM was fabricated using DC plasma spray technique. Nano structured and micro structured powder were used as the feeding powder with steel substrate. The spray parameters was optimized and characterisation of nano-ceramic FGM and micro-ceramic FGM were done using bending test and micro-hardness test. Experimental results have shown that the nano-structured FGM exhibit 20% improvement flexure strength and 10% in hardness. A comparison was made between sintered micro ceramic tile and nano ceramic FGM using simple drop test method.

  9. Nano-scale Materials and Nano-technology Processes in Environmental Protection

    Vissokov, Gh; Tzvetkoff, T.

    2003-01-01

    A number of environmental and energy technologies have benefited substantially from nano-scale technology: reduced waste and improved energy efficiency; environmentally friendly composite structures; waste remediation; energy conversion. In this report examples of current achievements and paradigm shifts are presented: from discovery to application; a nano structured materials; nanoparticles in the environment (plasma chemical preparation); nano-porous polymers and their applications in water purification; photo catalytic fluid purification; hierarchical self-assembled nano-structures for adsorption of heavy metals, etc. Several themes should be considered priorities in developing nano-scale processes related to environmental management: 1. To develop understanding and control of relevant processes, including protein precipitation and crystallisation, desorption of pollutants, stability of colloidal dispersion, micelle aggregation, microbe mobility, formation and mobility of nanoparticles, and tissue-nanoparticle interaction. Emphasis should be given to processes at phase boundaries (solid-liquid, solid-gas, liquid-gas) that involve mineral and organic soil components, aerosols, biomolecules (cells, microbes), bio tissues, derived components such as bio films and membranes, and anthropogenic additions (e.g. trace and heavy metals); 2. To carry out interdisciplinary research that initiates Noel approaches and adopts new methods for characterising surfaces and modelling complex systems to problems at interfaces and other nano-structures in the natural environment, including those involving biological or living systems. New technological advances such as optical traps, laser tweezers, and synchrotrons are extending examination of molecular and nano-scale processes to the single-molecule or single-cell level; 3. To integrate understanding of the roles of molecular and nano-scale phenomena and behaviour at the meso- and/or macro-scale over a period of time

  10. Jurados ciudadanos y organismos genéticamente modificados

    Luque, Emilio

    2005-04-01

    Full Text Available Apolitical sociology of food must look into the processes whereby regulatory decisions on food are made, and also into the democratic potential of their alternatives. Five "experiments in democracy" are described, in which a promising deliberative device has been used: citizens' juries. Indian and Brazilian peasants, on the one hand, and British consumers in the other took part in them, and they focused on Genetically Modified Organisms. These processes, whose defining trait is granting jurors access to expert witnesses presented by all stakeholders in the controversy, show the impressive ability of ordinary citizens to articulate their analysis of complex issues, a reassessment of risks, and a recontextualization of the use of GMOs. At any rate, deliberative democracy is not a magic bullet for the epistemic and political crisis that underlies food crisis; instead, it points at a paradigm change towards an experimental democratic polity in which the instances of representation of the public and publics are multiplied.

    Una sociología política de la alimentación debe analizar los procesos a través de los cuales se alcanzan las decisiones de regulación y control alimentario y examinar el potencial de sus alternativas. Se describen aquí cinco experimentos democráticos en los que se ha empleado uno de los dispositivos deliberativos más prometedores en condiciones de alta complejidad cognitiva, los llamados jurados ciudadanos, con la participación de campesinos hindúes y brasileños y consumidores británicos, y centrados en los Organismos Genéticamente Modificados. Estos procesos, caracterizados por el acceso de los miembros del jurado a testigos expertos presentados por los distintos participantes en la controversia, muestran la enorme capacidad de los ciudadanos "de a pie" para articular el análisis de un problema complejo, reevaluar sus riesgos y recontextualizar el uso de los OGM. En todo caso, la democracia deliberativa no es

  11. Nano-materials for solar energy conversion

    Davenas, J.; Boiteux, G.; Ltaief, A.; Barlier, V.

    2006-01-01

    Nano-materials present an important development potential in the field of photovoltaic conversion in opening new outlooks in the reduction of the solar energy cost. The organic or hybrid solar cells principle is based on the electron-hole pairs dissociation, generated under solar radiation on a conjugated polymer, by chemical species acting as electrons acceptors. The two ways based on fullerenes dispersion or on TiO 2 particles in a semi-conductor polymer (MEH-PPV, PVK) are discussed. The acceptors concentration is high in order to allow the conduction of the electrons on a percolation way, the polymer providing the holes conduction. A new preparation method of the mixtures MEH-PPV/fullerenes based on the use of specific solvents has allowed to produce fullerenes having nano-metric sizes ranges. It has then been possible to decrease the fullerenes concentration allowing the dissociation and the transport of photoinduced charges. The way based on the in-situ generation of TiO 2 from an organometallic precursor has allowed to obtain dispersions of nano-metric inorganic particles. The optimization of the photovoltaic properties of these nano-composites requires a particular adjustment of their composition and size ranges leading to a better control of the synthesis processes. (O.M.)

  12. Scaling laws for nanoFET sensors

    Zhou Fushan; Wei Qihuo

    2008-01-01

    The sensitive conductance change of semiconductor nanowires and carbon nanotubes in response to the binding of charged molecules provides a novel sensing modality which is generally denoted as nanoFET sensors. In this paper, we study the scaling laws of nanoplate FET sensors by simplifying nanoplates as random resistor networks with molecular receptors sitting on lattice sites. Nanowire/tube FETs are included as the limiting cases where the device width goes small. Computer simulations show that the field effect strength exerted by the binding molecules has significant impact on the scaling behaviors. When the field effect strength is small, nanoFETs have little size and shape dependence. In contrast, when the field effect strength becomes stronger, there exists a lower detection threshold for charge accumulation FETs and an upper detection threshold for charge depletion FET sensors. At these thresholds, the nanoFET devices undergo a transition between low and large sensitivities. These thresholds may set the detection limits of nanoFET sensors, while they could be eliminated by designing devices with very short source-drain distance and large width

  13. Sintering characteristics of nano-ceramic coatings

    de Hosson, J.T.M.; Popma, R.

    2003-01-01

    This paper concentrates on sintering characteristics of nano-sized ceramic SiO2 particles. The sintering process is studied as a function of temperature using a conventional furnace and using a laser beam. The underlying idea is to combine the nanoceramic sol-gel concept with inkjet technology and

  14. Metal nano-film resistivity chemical sensor

    Podešva, Pavel; Foret, František

    2016-01-01

    Roč. 37, č. 3 (2016), s. 392-397 ISSN 0173-0835 R&D Projects: GA ČR(CZ) GBP206/12/G014 Institutional support: RVO:68081715 Keywords : adsorption * chemiresistor * nano-film * thiol binding * thiol sensing Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 2.744, year: 2016

  15. Superconducting nano-strip particle detectors

    Cristiano, R; Ejrnaes, M; Casaburi, A; Zen, N; Ohkubo, M

    2015-01-01

    We review progress in the development and applications of superconducting nano-strip particle detectors. Particle detectors based on superconducting nano-strips stem from the parent devices developed for single photon detection (SSPD) and share with them ultra-fast response times (sub-nanosecond) and the ability to operate at a relatively high temperature (2–5 K) compared with other cryogenic detectors. SSPDs have been used in the detection of electrons, neutral and charged ions, and biological macromolecules; nevertheless, the development of superconducting nano-strip particle detectors has mainly been driven by their use in time-of-flight mass spectrometers (TOF-MSs) where the goal of 100% efficiency at large mass values can be achieved. Special emphasis will be given to this case, reporting on the great progress which has been achieved and which permits us to overcome the limitations of existing mass spectrometers represented by low detection efficiency at large masses and charge/mass ambiguity. Furthermore, such progress could represent a breakthrough in the field. In this review article we will introduce the device concept and detection principle, stressing the peculiarities of the nano-strip particle detector as well as its similarities with photon detectors. The development of parallel strip configuration is introduced and extensively discussed, since it has contributed to the significant progress of TOF-MS applications. (paper)

  16. Nanotechnology Environmental and Health Implications (NEHI) | Nano

    Skip main navigation Nano.gov Nanotechnology 101 What It Is and How It Works What is Nanotechnology What's So Special about the Nanoscale? NNI Accomplishments NNI Accomplishments Archive Nanotechnology Timeline Frequently Asked Questions Glossary Nanotechnology and You Benefits and Applications Networks and

  17. Immuno compatibility of Bacteriophages as Nano medicines

    Kaur, T.; Nafissi, N.; Wasfi, O.; Sheldon, K.; Wettig, Sh.; Slavcev, R.

    2012-01-01

    Bacteriophage-based medical research provides the opportunity to develop targeted nano medicines with heightened efficiency and safety profiles. Filamentous phages also can and have been formulated as targeted drug-delivery nano medicines, and phage may also serve as promising alternatives/complements to antibiotics. Over the past decade the use of phage for both the prophylaxis and the treatment of bacterial infection, has gained special significance in view of a dramatic rise in the prevalence of antibiotic resistance bacterial strains. Two potential medical applications of phages are the treatment of bacterial infections and their use as immunizing agents in diagnosis and monitoring patients with immunodeficiencies. Recently, phages have been employed as gene-delivery vectors (phage nano medicine), for nearly half a century as tools in genetic research, for about two decades as tools for the discovery of specific target-binding proteins and peptides, and for almost a decade as tools for vaccine development. As phage applications to human therapeutic development grow at an exponential rate, it will become essential to evaluate host immune responses to initial and repetitive challenges by therapeutic phage in order to develop phage therapies that offer suitable utility. This paper examines and discusses phage nano medicine applications and the immunomodulatory effects of bacteriophage exposure and treatment modalities.

  18. Replication Fidelity Assessment in Nano Moulding

    Calaon, Matteo; Hansen, Hans Nørgaard; Tosello, Guido

    2015-01-01

    to remove technology barrier between lab-scale proof-of-principle and high-volume low-cost production of nanotechnology-based products. In the current study research work has been devoted to develop methods and approaches to process chain characterization for final polymer micro and nano structures...

  19. Structural stability of nano-sized clusters

    De Hosson, JTM; Palasantzas, G; Vystavel, T; Koch, S; Ovidko,; Pande, CS; Krishnamoorti, R; Lavernia, E; Skandan, G

    2004-01-01

    This contribution presents challenges to control the microstructure in nano-structured materials via a relatively new approach, i.e. using a so-called nanocluster source. An important aspect is that the cluster size distribution is monodisperse and that the kinetic energy of the clusters during

  20. Mechanics over micro and nano scales

    Chakraborty, Suman

    2011-01-01

    Discusses the fundaments of mechanics over micro and nano scales in a level accessible to multi-disciplinary researchers, with a balance of mathematical details and physical principles Covers life sciences and chemistry for use in emerging applications related to mechanics over small scales Demonstrates the explicit interconnection between various scale issues and the mechanics of miniaturized systems

  1. We Scream for Nano Ice Cream

    Jones, M. Gail; Krebs, Denise L.; Banks, Alton J.

    2011-01-01

    There is a wide range of new products emerging from nanotechnology, and "nano ice cream" is an easy one that you can use to teach topics from surface area to volume applications. In this activity, students learn how ice cream can be made smoother and creamier tasting through nanoscience. By using liquid nitrogen to cool the cream mixture, students…

  2. Nano spray drying for encapsulation of pharmaceuticals.

    Arpagaus, Cordin; Collenberg, Andreas; Rütti, David; Assadpour, Elham; Jafari, Seid Mahdi

    2018-05-17

    Many pharmaceuticals such as pills, capsules, or tablets are prepared in a dried and powdered form. In this field, spray drying plays a critical role to convert liquid pharmaceutical formulations into powders. In addition, in many cases it is necessary to encapsulate bioactive drugs into wall materials to protect them against harsh process and environmental conditions, as well as to deliver the drug to the right place and at the correct time within the body. Thus, spray drying is a common process used for encapsulation of pharmaceuticals. In view of the rapid progress of nanoencapsulation techniques in pharmaceutics, nano spray drying is used to improve drug formulation and delivery. The nano spray dryer developed in the recent years provides ultrafine powders at nanoscale and high product yields. In this paper, after explaining the concept of nano spray drying and understanding the key elements of the equipment, the influence of the process parameters on the final powders properties, like particle size, morphology, encapsulation efficiency, drug loading and release, will be discussed. Then, numerous application examples are reviewed for nano spray drying and encapsulation of various drugs in the early stages of product development along with a brief overview of the obtained results and characterization techniques. Copyright © 2018 Elsevier B.V. All rights reserved.

  3. A new nano-biophotonics toolbox

    Glückstad, Jesper; Bañas, Andrew Rafael; Palima, Darwin

    The science fiction inspired shrinking of macro-scale robotic manipulation and handling down to the micro- and nano-scale regime open new doors for exploiting the forces and torques of light for micro- and nanobiologic probing, actuation and control. A generic approach for optimizing light...

  4. Nano technologies for Biosensor and Bio chip

    Kim, I.M.; Park, T.J.; Paskaleva, E.E.; Sun, F.; Seo, J.W.; Mehta, K.K.

    2015-01-01

    The bio sensing devices are characterized by their biological receptors, which have specificity to their corresponding analytes. These analytes are a vast and diverse group of biological molecules, DNAs, proteins (such as antibodies), fatty acids, or entire biological systems, such as pathogenic bacteria, viruses, cancerous cells, or other living organisms. A main challenge in the development of biosensor applications is the efficient recognition of a biological signal in a low signal-to-noise ratio environment, and its transduction into an electrochemical, optical, or other signals. The advent of nano material technology greatly increased the potential for achieving exquisite sensitivity of such devises, due to the innate high surface-to-volume ratio and high reactivity of the nano material. The second major challenge facing the biosensor application, that of sca lability, is addressed by multiplexing and miniaturizing of the biosensor devises into a bio chip. In recent years, biosensor and bio chip technologies have made significant progress by taking advantages of diverse kinds of nano materials that are derived from nano technology

  5. Manipulation and functionalization of nano-tubes: application to boron nitride nano-tubes

    Maguer, A.

    2007-01-01

    This PhD work is divided into two parts dealing with boron nitride (BNNT) and carbon nano-tubes. The first part is about synthesis, purification and chemical functionalization of BNNT. Single-walled BNNT are synthesized by LASER ablation of a hBN target. Improving the synthesis parameters first allowed us to limit the byproducts (hBN, boric acid). A specific purification process was then developed in order to enrich the samples in nano-tubes. Purified samples were then used to develop two new chemical functionalization methods. They both involve chemical molecules that present a high affinity towards the BN network. The use of long chain-substituted quinuclidines and borazines actually allowed the solubilization of BNNT in organic media. Purification and functionalization were developed for single-walled BNNT and were successfully applied to multi-walled BNNT. Sensibility of boron to thermic neutrons finally gave birth to a study about covalent functionalization possibilities of the network. The second part of the PhD work deals with separation of carbon nano-tubes depending on their properties. Microwave irradiation of carbon nano-tubes first allowed the enrichment of initially polydisperse samples in large diameter nano-tubes. A second strategy involving selective interaction between one type of tubes and fullerene micelles was finally envisaged to selectively solubilize carbon nano-tubes with specific electronic properties. (author) [fr

  6. Transferring metallic nano-island on hydrogen passivated silicon surface for nano-electronics

    Deng, J; Troadec, C; Joachim, C

    2009-01-01

    In a planar configuration, precise positioning of ultra-flat metallic nano-islands on semiconductor surface opens a way to construct nanostructures for atomic scale interconnects. Regular triangular Au nano-islands have been grown on atomically flat MoS 2 substrates and manipulated by STM to form nanometer gap metal-pads connector for single molecule electronics study. The direct assembly of regular shaped metal nano-islands on H-Si(100) is not achievable. Here we present how to transfer Au triangle nano-islands from MoS 2 onto H-Si(100) in a clean manner. In this experiment, clean MoS 2 substrates are patterned as array of MoS 2 pillars with height of 8 μm. The Au triangle nano-islands are grown on top of the pillars. Successful printing transfer of these Au nano-islands from the MoS 2 pillars to the H-Si(100) is demonstrated.

  7. Nano materials for Renewable Energy Storage: Synthesis, Characterization, and Applications

    Rather, S.U.; Zacharia, R.; Stephan, A.M.; Petrov, L.A.; Nair, J.R.

    2015-01-01

    Nano technology and nano scale materials have been part of human history and in use since centuries. Staining of glass windows hundreds of years ago is one of the examples where people created beautiful works without knowing that they are using nano processing. The beginning of modern era of nano technology dates back to the talk of the Nobel laureate Professor Richard Feynman in There plenty of room at the bottom. Professor Feynman hypothesized that in near future scientists would be able to control and modulate individual molecules and atoms. After a decade, Professor Norio Taniguchi introduced the magical word nano technology. However, in 1981, the introduction of scanning tunnelling microscope enabled the scientists to see the materials in nano scale that propagated the new age of nano technology.

  8. Review on Nano SeleniumProduced by Bacteria

    LI Ji-xiang

    2014-12-01

    Full Text Available Selenium (Se is a kind of essential trace element for people and animal, while ionic state of selenium is toxic with high concentrations and will cause the selenium pollution. Nano-selenium is stable, nontoxic with higher biological activity. Application of bacteria reducing selenite or selenate to biological nano-selenium has great potential in selenium pollution control and nano-selenium production. This review summarizes the research progress of the red elemental nano-selenium reduced by bacteria including characteristics and application of nano-selenium, effects of carbon and nitrogen source, oxygen, temperature and pH in bacteria nano-selenium production, and molecular mechanisms of nano-selenium reduced by bacteria.

  9. Nano-Fiber Reinforced Enhancements in Composite Polymer Matrices

    Chamis, Christos C.

    2009-01-01

    Nano-fibers are used to reinforce polymer matrices to enhance the matrix dependent properties that are subsequently used in conventional structural composites. A quasi isotropic configuration is used in arranging like nano-fibers through the thickness to ascertain equiaxial enhanced matrix behavior. The nano-fiber volume ratios are used to obtain the enhanced matrix strength properties for 0.01,0.03, and 0.05 nano-fiber volume rates. These enhanced nano-fiber matrices are used with conventional fiber volume ratios of 0.3 and 0.5 to obtain the composite properties. Results show that nano-fiber enhanced matrices of higher than 0.3 nano-fiber volume ratio are degrading the composite properties.

  10. Mass transfer in nano-fluids: A review

    Ashrafmansouri, Seyedeh-Saba; Esfahany, Mohsen Nasr

    2014-01-01

    Growing attention has been recently paid to nano-fluids because of their potential for augmenting transfer processes - i.e., heat and mass transfer. Conflicting results have been reported in the literature on mass transfer in nano-fluids. The aim of this paper is to summarize the literature on mass transfer in nano-fluids stating the conflicts and possible reasons. Literature on mass transfer in nano-fluids has been reviewed in two sections. The first section concentrates on surveying mass diffusivity in nano-fluids while the second section focuses on convective mass transfer in nano-fluids. In each section, published articles, type of nano-fluids used, size and concentration range of nanoparticles, measurement methods, maximum observed enhancement, and suggested mass transport mechanisms are summarized. (authors)

  11. Applying Nano technology to Human Health: Revolution in Biomedical Sciences

    Shrivastava, S.; Dash, D.

    2009-01-01

    Recent research on bio systems at the nano scale has created one of the most dynamic science and technology domains at the confluence of physical sciences, molecular engineering, biology, biotechnology, and medicine. This domain includes better understanding of living and thinking systems, revolutionary biotechnology processes, synthesis of new drugs and their targeted delivery, regenerative medicine, necrophorum engineering, and developing a sustainable environment. Nano bio systems research is a priority in many countries and its relevance within nano technology is expected to increase in the future. The realisation that the nano scale has certain properties needed to solve important medical challenges and cater to unmet medical needs is driving nano medical research. The present review explores the significance of nano science and latest nano technologies for human health. Addressing the associated opportunities, the review also suggests how to manage far-reaching developments in these areas

  12. Tools for Designing, Evaluating, and Certifying NextGen Technologies and Procedures: Automation Roles and Responsibilities

    Kanki, Barbara G.

    2011-01-01

    Barbara Kanki from NASA Ames Research Center will discuss research that focuses on the collaborations between pilots, air traffic controllers and dispatchers that will change in NextGen systems as automation increases and roles and responsibilities change. The approach taken by this NASA Ames team is to build a collaborative systems assessment template (CSAT) based on detailed task descriptions within each system to establish a baseline of the current operations. The collaborative content and context are delineated through the review of regulatory and advisory materials, policies, procedures and documented practices as augmented by field observations and interviews. The CSAT is developed to aid the assessment of key human factors and performance tradeoffs that result from considering different collaborative arrangements under NextGen system changes. In theory, the CSAT product may be applied to any NextGen application (such as Trajectory Based Operations) with specified ground and aircraft capabilities.

  13. Preparation and characterization of functionalized cellulose nano crystals with methyl adipoyl chloride used to prepare chitosan grafting nano composite

    Mesquita, Joao Paulo de; Teixeira, Ivo F.; Donnici, Claudio L.; Pereira, Fabiano V.

    2011-01-01

    Cellulose nano crystals (CNCs) were prepared from eucalyptus pulp and functionalized with methyl adipoyl chloride. The nano materials were characterized by different techniques including FTIR, 1H NMR and XRD which showed that the functionalization occurs only on the surface of the nano structures without change in crystalline structure of the nanoparticles. The new-functionalized CNCs were used as reinforcement in the preparation of a nano composite with chitosan, through the formation of a covalent bond between the nano filler and matrix. Preliminary results of mechanical tests indicate an improvement in tensile strength and increase in deformation of chitosan. (author)

  14. O futuro da epidemiologia genética de características complexas

    Feitosa Mary F.

    2002-01-01

    Full Text Available A epidemiologia genética evoluiu de um enfoque em estudos sobre doenças mendelianas raras para a análise genética de características complexas. Com o advento de informações sobre a completa seqüência de genes ao longo do genoma humano e de outros organismos, o interesse da epidemiologia genética em desvendar a natureza dos fatores que influenciam essas características se tornou primordial. São apresentados os principais métodos empregados no estudo de doenças complexas bem como suas principais vantagens e desvantagens. Discute-se a importância na determinação da amostra e o uso de fenótipos e marcadores genéticos apropriados. Como exemplo das estratégias citadas tomamos o estudo de índice de massa corporal (BMI para ilustrar um fator genético principal localizado no cromossomo 7. Em uma discussão sobre tendências no estudo de ligação, embora reconhecendo que famílias e genealogias continuarão sendo o foco principal das amostras, discute-se alguns novos e eficientes tipos de amostragem (como por exemplo, controles não-relacionados em que amostras de conjunto de DNA serão universalmente empregadas. O reconhecimento da heterogeneidade genética entre estudos e sua interpretação será uma das mais importantes características no futuro das análises de características complexas.

  15. Coeficiente de repetibilidade e parâmetros genéticos em capim-elefante

    Marcelo Cavalcante

    2012-04-01

    Full Text Available O objetivo deste trabalho foi determinar os coeficientes de repetibilidade de caracteres morfofisiológicos em genótipos de capim-elefante (Pennisetum spp., a partir de dados obtidos durante seis ciclos de avaliação. Foram estimados: número mínimo de medições e parâmetros genéticos. Utilizou-se o delineamento experimental de blocos ao acaso, em arranjo de parcelas subdivididas, com quatro níveis de N (controle, 30, 60 e 90 kg ha‑1 por corte e 16 genótipos de Pennisetum (11 híbridos interespecíficos e cinco cultivares. Os ciclos consistiram de avaliações em 2010 (21/4, 19/7 e 28/9 e 2011 (6/1, 7/4 e 3/8. Os coeficientes de repetibilidade foram de média‑alta magnitude para todas as variáveis, o que indica que houve regularidade entre as medidas repetidas. Para as variáveis massa de forragem, altura da planta, comprimento e largura da folha, diâmetro do colmo, clorose e índice de área foliar, três ciclos de avaliação são suficientes para obter R² de 90%, pela análise de componentes principais. Para o comprimento do entrenó, o mínimo de sete avaliações é necessário para predizer o valor real dos genótipos. Os parâmetros genéticos das variáveis massa de forragem, comprimento e largura da folha, diâmetro do colmo e clorose foliar são de alta magnitude, o que favorece a seleção de genótipos superiores de Pennisetum.

  16. Loci asociados con enfermedades genéticas y calidad de carne en bovinos Charolais Mexicanos

    Ana María Sifuentes Rincón

    2015-01-01

    Full Text Available Se determinaron las frecuencias alélicas y genotípicas de ocho marcadores localizados en los genes calpaína (CAPN, 4 751 y 316, calpastatina (CASTT1 y tiroglobulina (TG5, asociados a calidad de carne, y en los genes, m iost atina (MSTN, Q204X, arginino succinato sintasa (ASS, monofosfato sintasa (UMPS y miofosforilasa (PYGM, asocia dos a enfermedade s genéticas de ganado bovino. Se muestrearon 493 animales Charolais de registro de dos hatos ubicado s en Sonora (n=157 y tres en Nuevo León (n=336. No se encontraron portadores de los alelos T-ASS y T-UM PS, pero sí portadores del alelo Q204X del gen MSTN en frecuencias de  1 % en las poblaciones de Sonora y de 8.6 a 14.4 % en las de Nuevo León. Además, se identificaron portadores del marcador del gen PYGM, en frecuencias del 6.5 y de 1.0 % para un hato de Sonora y otro de Nuevo León, respectivamente. El análisis de diferenciación génica p areado entre las poblaciones y con los cuatro loci mostró que hay diferencias altamente significativas dentro de pobl aciones del noroeste ( P <0.0001 y entre éstas y las del noreste ( P <0.001, la cual es explicada principalmente por los loci CAPN-316 y TG5. De acuerdo a los resultados obtenidos se recomienda el monitoreo del marcador del gen PYGM y del ale lo Q204X del gen MSTN, así como también implementar estrategias para confirmar la utilidad de los marcadores asociado s a calidad y productividad como herramienta para complementar los progra mas de mejoramiento genético.

  17. SIPSMetGen: It's Not Just For Aircraft Data and ECS Anymore.

    Schwab, M.

    2015-12-01

    The SIPSMetGen utility, developed for the NASA EOSDIS project, under the EED contract, simplified the creation of file level metadata for the ECS System. The utility has been enhanced for ease of use, efficiency, speed and increased flexibility. The SIPSMetGen utility was originally created as a means of generating file level spatial metadata for Operation IceBridge. The first version created only ODL metadata, specific for ingest into ECS. The core strength of the utility was, and continues to be, its ability to take complex shapes and patterns of data collection point clouds from aircraft flights and simplify them to a relatively simple concave hull geo-polygon. It has been found to be a useful and easy to use tool for creating file level metadata for many other missions, both aircraft and satellite. While the original version was useful it had its limitations. In 2014 Raytheon was tasked to make enhancements to SIPSMetGen, this resulted a new version of SIPSMetGen which can create ISO Compliant XML metadata; provides optimization and streamlining of the algorithm for creating the spatial metadata; a quicker runtime with more consistent results; a utility that can be configured to run multi-threaded on systems with multiple processors. The utility comes with a java based graphical user interface to aid in configuration and running of the utility. The enhanced SIPSMetGen allows more diverse data sets to be archived with file level metadata. The advantage of archiving data with file level metadata is that it makes it easier for data users, and scientists to find relevant data. File level metadata unlocks the power of existing archives and metadata repositories such as ECS and CMR and search and discovery utilities like Reverb and Earth Data Search. Current missions now using SIPSMetGen include: Aquarius, Measures, ARISE, and Nimbus.

  18. Alimentos Transgénicos : Organismos Genéticamente Modificados (OGM)

    Martín López, Jimena

    2016-01-01

    Los alimentos transgénicos son aquellos que proceden de un organismo modificado genéticamente. La introducción de este tipo de productos en nuestra dieta es un tema que genera controversia ya que en muchos casos no se conoce con exactitud los efectos que esta modificación puede tener en el ser humano. A lo largo de las páginas de este trabajo se explica la historia de la aparición de estos organismos gracias a procedimientos de ingeniería genética, en los que se modifican fragmentos de su ADN...

  19. Prevalencia de bacterias Gram negativas portadoras del gen blaKPC en hospitales de Colombia

    Robinson Pacheco

    2014-04-01

    Full Text Available Introducción. Las enzimas carbapenemasas de tipo KPC tienen gran capacidad de diseminación, son causantes de epidemias y se asocian a mayor mortalidad y estancia hospitalaria. En Colombia se han venido reportando cada vez más desde 2007, pero se desconoce la prevalencia hospitalaria. Objetivo. Estimar la prevalencia hospitalaria del gen blaKPC. Materiales y métodos. Se evaluó la presencia del gen blaKPC y su ‘clonalidad’ en aislamientos de enterobacterias y Pseudomonas aeruginosa de pacientes hospitalizados. Resultados. De los 424 aislamientos evaluados durante el periodo de estudio, 273 cumplieron con criterios de elegibilidad, 31,1 % fue positivo para el gen blaKPC y, al ajustar por ‘clonalidad’, la positividad fue de 12,8 %. El gen blaKPC se encontró con mayor frecuencia en Klebsiella pneumoniae seguido de P. aeruginosa y otras enterobacterias. A pesar de que la unidad de cuidados intensivos aportó el mayor número de aislamientos, no se encontró un patrón más prevalente del gen blaKPC en las ellas que en las otras salas. El aparato respiratorio fue el sitio anatómico de origen con la mayor prevalencia. No se presentó estacionalidad en la frecuencia de los aislamientos portadores del gen blaKPC. Conclusión. Este estudio reveló la alta prevalencia del gen blaKPC en diferentes microorganismos aislados en varias instituciones hospitalarias del país. La extraordinaria capacidad de propagación del gen blaKPC, las dificultades del diagnóstico y la limitada disponibilidad de antibióticos plantean la apremiante necesidad de fortalecer los sistemas de vigilancia epidemiológica y ajustar oportunamente las políticas institucionales de uso racional de antibióticos con el fin de contener su diseminación a otras instituciones de salud del país.

  20. Prevalencia de bacterias Gram negativas portadoras del gen blaKPC en hospitales de Colombia

    Robinson Pacheco; Lyda Osorio; Adriana M. Correa; Maria Virginia Villegas

    2014-01-01

    Introducción. Las enzimas carbapenemasas de tipo KPC tienen gran capacidad de diseminación, son causantes de epidemias y se asocian a mayor mortalidad y estancia hospitalaria. En Colombia se han venido reportando cada vez más desde 2007, pero se desconoce la prevalencia hospitalaria. Objetivo. Estimar la prevalencia hospitalaria del gen blaKPC. Materiales y métodos. Se evaluó la presencia del gen blaKPC y su ‘clonalidad’ en aislamientos de enterobacterias y Pseudomonas aeruginosa de p...

  1. Microsatélites, distancias genéticas y estructura de poblaciones nativas sudamericanas

    Demarchi, Darío Alfredo

    2009-01-01

    Full Text Available En este trabajo se investigaron las relaciones genéticas entre 17 poblaciones nativas sudamericanas en relación a 15 microsatélites (STRs autosómicos, utilizando 3 distancias genéticas- DST, DAy (δu2-que se ajustan a diferentes postulados teóricos. A través de diferentes técnicas de análisis (escalamiento multidimensional, correlación y correlación parcial de matrices se puso a prueba si las distancias genéticas reflejaban las relaciones interpoblacionales esperadas a partir de la distribución geográfica o de relaciones lingüísticas entre las poblaciones. Además, se estimó en que grado las distintas medidas de distancias genéticas eran influenciadas por la diversidad (He de cada población. Los mapas genéticos muestran, principalmente para DST y DA, que las poblaciones aisladas y con bajo tamaño efectivo (Ne aparecen como outliers, mientras que las poblaciones con alto Ne y mayor flujo génico ocupan una posición central a bajos valores de distancia unas de otras y sin un patrón definido de agrupamiento. La falta de asociación entre distancias genéticas y lingüísticas o geográficas y por otra parte, la alta correlación negativa entre He y distancias génicas promedio por población confiman ese patrón, demostrando que la mayor parte de la variación interpoblacional puede ser explicada en función del grado de diversidad intrapoblacional. Es decir, las distancias genéticas no reflejan relaciones filogenéticas, lingüísticas o geográficas, sino más bien eventos demográficos recientes tales como cuellos de botella genético, efecto fundador o migración externa masiva. Este hecho puede ser comprobado por medio de otra metodología analítica, el modelo de Harpending y Ward.

  2. Description of a new genus, Galgoria gen. nov. (Hemiptera: Cicadidae: Cicadinae: Leptopsaltriini: Leptopsaltriina).

    Lee, Young June

    2016-05-10

    A new cicada genus, Galgoria gen. nov., is described with Tanna herzbergi Schmidt, 1932 (from southern China) as its type species, which is placed in the subtribe Leptopsaltriina Moulton, 1923 of the tribe Leptopsaltriini Moulton, 1923 in the subfamily Cicadinae Latreille, 1802 (Hemiptera: Cicadidae). Tanna herzbergi Schmidt, 1932 is transferred from Tanna Distant, 1905 to Galgoria gen. nov. to become Galgoria herzbergi (Schmidt, 1932) comb. nov. Tanna apicalis Chen, 1940 syn. nov. and Tanna pseudocalis Lei & Chou, 1997 syn. nov. are synonymized here with Galgoria herzbergi (Schmidt, 1932) comb. nov.

  3. LEPINOCONUS CHIOCCHINII GEN. N., N. SP., A CONICAL AGGLUTINATED FORAMINIFERA FROM THE UPPER CRETACEOUS OF ITALY

    ERZIKA CRUZ-ABAD

    2017-04-01

    Full Text Available A new conical agglutinated foraminifer, Lepinoconus chiocchinii gen n., n. sp. from the lower Campanian shallow-water platform deposits of the Lepini Mountains (central Apennines, Italy, is described. It has a pseudo-keriothecal wall structure, uniserial arrangement of the adult chambers and multiple apertures. The exoskeleton is constituted by beams (main and intercalary continuous from one chamber to the next, while the endoskeleton bears pillars. The new taxon is included in the Coskinolinidae family. Lepinoconus chiocchinii gen. n., n. sp. is known from southern Italy, Greece and Albania.

  4. Reporte de familias con neurofibromatosis y otras enfermedades genéticas

    Orraca Castillo, Miladys; Licourt Otero, Deysi; Sánchez Álvarez de La Campa, Ana Isabel

    2011-01-01

    La neurofibromatosis tipo 1, es una enfermedad genética que primariamente afecta el desarrollo y crecimiento celular del sistema nervioso, clínicamente se caracteriza por máculas café con leche, neurofibromas, pecas en regiones no expuestas al sol, nódulos de Lisch, lesiones óseas y glioma óptico. En el presente trabajo se describen dos familias, en las cuales algunos individuos padecen esta enfermedad y otros miembros de la misma familia muestran una diferente enfermedad genética. La coexist...

  5. InGen Inconsistencies: The "Dinosaurs" Of Jurassic Park May Not Be What The Corporation Claims

    Haupt, R. J.; Traer, M. M.

    2017-12-01

    InGen has made and continues to make dubious claims about proprietary technology developed to clone non-avian dinosaurs for exhibition within their "Jurassic Park." Notably, there are several inconsistencies between their claims for how their technology works and what has been observed within the park. Here we investigate several of these inconsistencies in the hopes that it will push for increased transparency between corporations and academia. First, we highlight a disconnect between supposedly Jurassic amber used for dinosaur DNA extraction and the overwhelming presence of Late Cretaceous dinosaurs within the park. Further, InGen's mining operations only publicly operate in Jurassic-aged formations of the Dominican Republic, which clashes with the presence of Velociraptor and Gallimimus, known only from Mongolia. Second, the park contains seemingly full-grown adult specimens despite InGen's claims that they first successfully cloned a prehistoric animal in 1984, though there is no publicly available information as to what animal this was. That the park was nearly ready to open by 1993 precludes the presence of fully mature dinosaurs and suggests that InGen might be misrepresenting their technologies. Third, we must point out that fossil DNA denatures to the point of uselessness within thousands, not millions, of years. Additionally, the use of anuran DNA to fill in gaps from fossil dinosaurian DNA is a dubious choice given that more closely related organisms are available. Either there is an unexplained reason for this choice, or little attention has been paid to dinosaurian phylogeny by InGen geneticists. Finally, rumors of a secret InGen project to produce a dinosaur not currently known to paleontologists suggests one of two things: they were able to find DNA from a dinosaur previously unknown in the fossil record, which is highly plausible if their techniques are valid, or that InGen is able to artificially manipulate DNA to a degree far beyond what other

  6. Aspectos genéticos y neuroendocrinos en el trastorno del espectro autista

    Oviedo, Norma; Manuel-Apolinar, Leticia; de la Chesnaye, Elsa; Guerra-Araiza, Christian

    2015-01-01

    El autismo, hoy en día definido como trastornos del espectro autista, fue descrito inicialmente en 1943. Se caracteriza por alteraciones en la comunicación, la interacción social y un espectro restringido de intereses del paciente. Generalmente se identifica en etapas tempranas del desarrollo a partir de los 18 meses de edad. Actualmente el autismo se considera un desorden neurológico con un espectro que abarca diferentes grados que se asocian con factores genéticos, no genéticos y del medio ...

  7. Melostelis gen. nov., espécies novas e notas complementares sobre Anthidiini (Hymenoptera, Apidae

    Danúncia Urban

    2011-06-01

    Full Text Available Melostelis gen. nov., espécies novas e notas complementares sobre Anthidiini (Hymenoptera, Apidae. Melostelis gen. nov. é proposto para um novo Anthidiini cleptoparasita. São descritas e ilustradas duas espécies novas: Melostelis amazonensis sp. nov. de Manaus, Amazonas e Larocanthidium chacoense sp. nov. de Porto Murtinho, Mato Grosso do Sul. São dados a conhecer os machos de Epanthidium bolivianum Urban, 1995 e Epanthidium araranguense Urban, 2006 e, registrados pela primeira vez no Brasil, na sub-região do chaco, Ketianthidium zanolae Urban, 2000 e Epanthidium bolivianum.

  8. Clasificador genérico de objetos en imágenes AVHRR

    Pascual Ramírez, Fermín; Paz Pellat, Fernando; Martínez Menes, Mario; Palacios Vélez, Enrique; Mejía Sáenz, Enrique; Rubio Granados, Erasmo

    2010-01-01

    El presente artículo describe un algoritmo para llevar a cabo una clasificación genérica de objetos utilizando imágenes del sensor advanced very high resolution radiometer (AVHRR), basado en la firma espectral de los objetos genéricos (suelo, mezcla suelo-vegetación, cuerpos de agua, nubes, etc.). Debido a las particularidades de las bandas disponibles en el sensor AVHRR, se presenta un algoritmo específico utilizando la banda 3a (B3a) y otro utilizando la banda 3b (B3b) de este sensor. Los a...

  9. Inventering av Suldalslågen. Produksjonspotensial for sjøvandrende laksefisk

    Foldvik, Anders; Pettersen, Oskar

    2017-01-01

    Foldvik, A. & Pettersen, O. 2017. Inventering av Suldalslågen. Produksjonspotensial for sjøvandrende laksefisk. - NINA Kortrapport 75, 18 s. Reguleringen av Suldalslågen til kraftproduksjon har hatt negative effekter for habitat for laksefisk, blant annet i form av sedimentering og begroing av substratet. Disse prosessene har blitt forsøkt motvirket ved å ha en serie med spyleflommer på over 200 m3/s om høsten. På oppdrag fra Statkraft inverterte NINA oppvekst- og gyteforhold for laks i Su...

  10. História da genética no Brasil: um olhar a partir do Museu da Genética da Universidade Federal do Rio Grande do Sul

    Vanderlei Sebastiao de Souza

    2013-06-01

    Full Text Available Aborda o contexto de criação do Museu da Genética, em 2011 no Departamento de Genética na Universidade Federal do Rio Grande do Sul, em Porto Alegre, e apresenta sua estrutura e conteúdo. Argumenta-se que os materiais disponibilizados no Museu da Genética constituem uma rica fonte para pesquisas sobre a história da genética no Brasil (e da genética de populações humanas em particular a partir da segunda metade do século XX, tema ainda pouco investigado, apesar da proeminência dessa área do conhecimento no Brasil.

  11. Reflexo da interação genótipo x ambiente sobre o melhoramento genético de feijão

    Pereira, Thayse Cristine Vieira; Schmit, Rodolfo; Haveroth, Eduardo José; Melo, Rita Carolina de; Coimbra, Jefferson Luís Meirelles; Guidolin, Altamir Frederico; Backes, Rogério Luiz

    2015-01-01

    RESUMO: O objetivo foi avaliar os componentes da variância fenotípica e estimar a influência da interação genótipo*ambiente no rendimento de grãos em feijão. Os componentes da variância fenotípica foram estimados pelo método da máxima verossimilhança restrita e do melhor preditor linear não viesado (REML/BLUP), juntamente com o espaço de inferência específico. As avaliações foram realizadas nas safras agrícolas de 2006/07 a 2011/12 no município de Lages/SC. Durante o período, 104 genótipos fo...

  12. Nano-dot and nano-pit fabrication on a GaAs substrate by a pulse applied AFM

    Kim, H C; Yu, J S; Ryu, S H

    2012-01-01

    The nano-patterning characteristics of GaAs is investigated using a pulse applied atomic force microscope (AFM). Very short range voltage pulses of micro to nano-seconds’ duration are applied to a conductive diamond-coated silicon (Si) tip in contact mode, to regulate the created feature size. The effects of pulse conditions such as pulse voltage, duration, frequency, offset voltage, anodization time, and applied tip pressure on nano-dot generation are characterized, based on the experiments. An interesting phenomenon, nano-pit creation instead of nano-dot creation, is observed when the applied pulse duration is less than 100 μs. Pulse frequency and offset voltage are also involved in nano-pit generation. The electrical spark discharge between the tip and the GaAs's surface is the most probable cause of the nano-pit creation and its generation mechanism is explained by considering the relevant pulse parameters. Nano-pits over 15 nm in depth are acquired on the GaAs substrate by adjusting the pulse conditions. This research facilitates the fabrication of more complex nano-structures on semiconductor materials since nano-dots and nano-pits could be easily made without any additional post-processes. (paper)

  13. A Novel Silicon-based Wideband RF Nano Switch Matrix Cell and the Fabrication of RF Nano Switch Structures

    Yi Xiu YANG

    2011-12-01

    Full Text Available This paper presents the concept of RF nano switch matrix cell and the fabrication of RF nano switch. The nano switch matrix cell can be implemented into complex switch matrix for signal routing. RF nano switch is the decision unit for the matrix cell; in this research, it is fabricated on a tri-layer high-resistivity-silicon substrate using surface micromachining approach. Electron beam lithography is introduced to define the pattern and IC compatible deposition process is used to construct the metal layers. Silicon-based nano switch fabricated by IC compatible process can lead to a high potential of system integration to perform a cost effective system-on-a-chip solution. In this paper, simulation results of the designed matrix cell are presented; followed by the details of the nano structure fabrication and fabrication challenges optimizations; finally, measurements of the fabricated nano structure along with analytical discussions are also discussed.

  14. Allocation of Laophonte trispinosa Sewell to Xanthilaophonte gen. nov. and the description of X. carcinicola spec. nov. (Harpacticoida: Laophontidae)

    Fiers, F.

    1991-01-01

    Laophonte trispinosa Sewell is reported here from various localities in the Indian and the West Pacific Ocean, and is allocated to the herein erected genus Xanthilaophonte gen. nov. A second species, X. carcinicola spec. nov. is described from Indon »sia. The genus Xanthilaophonte gen. nov. is most

  15. 75 FR 1052 - Terra-Gen Dixie Valley, LLC; TGP Dixie Development Company, LLC; New York Canyon, LLC; Notice of...

    2010-01-08

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. EL10-29-000] Terra-Gen Dixie Valley, LLC; TGP Dixie Development Company, LLC; New York Canyon, LLC; Notice of Filing December 30, 2009. Take notice that on December 24, 2009, Terra-Gen Dixie Valley, LLC, TGP Dixie Development Company, LLC...

  16. Using the kaleidoscope career model to examine generational differences in work attitudes between Gen X and Gen Y– within Malaysia Perspective

    Koay, Chee Hua Alwyn

    2016-01-01

    Generation Y (also known as Yers) has started to take a prominent position in today’s workforce. With this new position comes a new territory of research. The research about this generation has increased over the past years, with most of this research focusing on characteristics of GenY (Sheahan (2005), Martin (2005), Armour (2005)) and the differences between generations (Smola and Sutton (2002), Cennamo and Gardner (2008)). Noticeably, there has been many literature and news (Hoi J., 2013) ...

  17. The therapeutic effect of nano-encapsulated and nano-emulsion forms of carvacrol on experimental liver fibrosis.

    Hussein, Jihan; El-Banna, Mona; Mahmoud, Khaled F; Morsy, Safaa; Abdel Latif, Yasmin; Medhat, Dalia; Refaat, Eman; Farrag, Abdel Razik; El-Daly, Sherien M

    2017-06-01

    The present study aimed to compare the therapeutic efficiency of nano-encapsulated and nano-emulsion carvacrol administration on liver injury in thioacetamide (TAA) treated rats. To fulfill our target, we used sixty male albino rats classified into six groups as follow: control, nano-encapsulated carvacrol, nano-emulsion carvacrol, thioacetamide, treated nano-encapsulated carvacrol and treated nano-emulsion carvacrol groups. Blood samples were collected from all groups and the separated serum was used for analysis of the following biochemical parameters; aspartate aminotransferase (AST), alanine aminotransferase (ALT), S100 B protein, alpha fetoprotein (AFP) and caspase-3. The levels of malondialdehyde (MDA), reduced glutathione (GSH), nitric oxide (NO), monocyte chemoattractant protein-1(MCP-1) and hydroxyproline content were all evaluated in liver tissue homogenate. Histopathological examinations for liver tissues were also performed. Thioacetamide induced hepatic damage in rats as revealed by the significant increase in the levels of serum ALT, AST and produced oxidative stress as displayed by the significant elevation in the levels of hepatic MDA and NO concomitant with a significant decrease in GSH. In addition, thioacetamide significantly increased serum S100B protein, alpha fetoprotein and caspase-3 along with hepatic MCP-1 and hydroxyproline; these results were confirmed by the histopathological investigation. In contrast, nano-encapsulated and nano-emulsion carvacrol were able to ameliorate these negative changes in the thioacetamide injected rats. However, the effect of the nano-encapsulated form of carvacrol was more prominent than the nano-emulsion form. Nano-encapsulated and nano-emulsion carvacrol can ameliorate thioacetamide induced liver injury. These results could be attributed to the potential anti-inflammatory, antioxidant, and anti-apoptotic activities of carvacrol in addition to the effectiveness of the encapsulation technique that can protect

  18. Discusión: Explicaciones genéticas y psicológicas de la esquizofrenia. Bases genéticas de la esquizofrenia: "Nurture vrs Nature

    Henriette Raventós-Vorst

    2003-01-01

    Full Text Available El presente artículo revisa la evidencia científica que muestra la heredabilidad de la esquizofrenia, su forma de herencia compleja y la posible heterogeneidad genética y ambiental. Se presentan las regiones cromosómicas que han sido ligadas a la enfermedad y algunos de los genes candidatos. El objetivo es presentar los resultados más importantes en el campo de la investigación genética de la enfermedad. Aunque se acepta que factores ambientales deben estar presentes en la etiopatogenia de la enfermedad, no se profundiza en ellos. Finalmente, se comenta el modelo lamarquiano sugerido por el Prof.. Bolaños. El fin es transmitir que en la actualidad no hay contradicción entre el modelo biologista o psicológico que explicaban esta enfermedad. La concepción moderna une ambos modelos: se considera una enfermedad del neurodesarrollo en la que participan factores genéticos, factores epigenéticos y noxas ambientales, incluyendo los factores psicosociales.

  19. The IceCube Neutrino Observatory - Contributions to ICRC 2017 Part VI: IceCube-Gen2, the Next Generation Neutrino Observatory

    Collaboration, IceCube-Gen2; :; Aartsen, M. G.; Ackermann, M.; Adams, J.; Aguilar, J. A.; Ahlers, M.; Ahrens, M.; Samarai, I. Al; Altmann, D.; Andeen, K.; Anderson, T.; Ansseau, I.; Anton, G.; Argüelles, C.

    2017-01-01

    Papers on research & development towards IceCube-Gen2, the next generation neutrino observatory at South Pole, submitted to the 35th International Cosmic Ray Conference (ICRC 2017, Busan, South Korea) by the IceCube-Gen2 Collaboration.

  20. PZT piezoelectric films on glass for Gen-X imaging

    Wilke, Rudeger H. T.; Trolier-McKinstry, Susan; Reid, Paul B.; Schwartz, Daniel A.

    2010-09-01

    The proposed adaptive optics system for the Gen-X telescope uses piezoelectric lead zirconate titanate (PZT) films deposited on flexible glass substrates. The low softening transition of the glass substrates imposes several processing challenges that require the development of new approaches to deposit high quality PZT thin films. Synthesis and optimization of chemical solution deposited 1 μm thick films of PbZr0.52Ti0.48O3 on small area (1 in2) and large area (16 in2) Pt/Ti/glass substrates has been performed. In order to avoid warping of the glass at temperatures typically used to crystallize PZT films ({700°C), a lower temperature, two-step crystallization process was employed. An {80 nm thick seed layer of PbZr0.30Ti0.70O3 was deposited to promote the growth of the perovskite phase. After the deposition of the seed layer, the films were annealed in a rapid thermal annealing (RTA) furnace at 550°C for 3 minutes to nucleate the perovskite phase. This was followed by isothermal annealing at 550°C for 1 hour to complete crystallization. For the subsequent PbZr0.52Ti0.48O3 layers, the same RTA protocol was performed, with the isothermal crystallization implemented following the deposition of three PbZr0.52Ti0.48O3 spin-coated layers. Over the frequency range of 1 kHz to 100 kHz, films exhibit relative permittivity values near 800 with loss tangents below 0.07. Hysteresis loops show low levels of imprint with coercive fields of 40-50 kV/cm in the forward direction and 50-70 kV/cm in the reverse direction. The remanent polarization varied from 25-35 μC/cm2 and e31,f values were approximately -5.0 C/m2. In scaling up the growth procedure to large area films, where warping becomes more pronounced due to the increased size of the substrate, the pyrolysis and crystallization conditions were performed in a box furnace to improve the temperature uniformity. By depositing films on both sides of the glass substrate, the tensile stresses are balanced, providing a

  1. Ceramic compositions based on nano forsterite/nano magnesium aluminate spinel powders

    Khattab, R.M.; Wahsh, M.M.S.; Khalil, N.M.

    2015-01-01

    According to the wide applications in the field of chemical and engineering industries, forsterite (Mg_2SiO_4)/spinel (MgAl_2O_4) ceramic compositions were the matter of interest of several research works during the last three decades. This work aims at preparation and characterization of improved ceramic bodies based on forsterite and spinel nano powders through controlling the forsterite and spinel contents in the prepared mixes. These prepared ceramic compositions have been investigated through measuring the densification parameters, cold crushing strength as well as volume resistively. Nano spinel was added from 0 to 30 mass% on expense of nano forsterite matrix and fired at 1550 °C for 2 h. The phase composition of the fired samples was examined using x-ray diffraction (XRD) technique. The microstructure of some selected samples was shown using scanning electron microscope (SEM). A pronounced improvement in the sintering, mechanical properties and volume resistively were achieved with increasing of nano spinel addition up to 15 mass%. This is due to the improvement in the matrix of the prepared forsterite/spinel bodies as a result of well distribution of spinel in the forsterite matrix as depicted by SEM analysis. - Highlights: • Ceramic compositions based on nano forsterite/nano-MgAl_2O_4 spinel were synthesized. • CCS was improved (333.78 MPa) through 15 mass% of nano-MgAl_2O_4 spinel addition. • Volume resistivity was enhanced to 203*10"1"3 Ohm cm with 15 mass% of spinel addition. • Beyond 15 mass% spinel, CCS and volume resistivity were decreased.

  2. Nano-structural characteristics and optical properties of silver chiral nano-flower sculptured thin films

    Savaloni, Hadi, E-mail: savaloni@khayam.ut.ac.ir [Department of Physics, University of Tehran, North-Kargar Street, Tehran (Iran, Islamic Republic of); Haydari-Nasab, Fatemh; Malmir, Mariam [Department of Physics, University of Tehran, North-Kargar Street, Tehran (Iran, Islamic Republic of)

    2011-08-15

    Silver chiral nano-flowers with 3-, 4- and 5-fold symmetry were produced using oblique angle deposition method in conjunction with the rotation of sample holder with different speeds at different sectors of each revolution corresponding to symmetry order of the acquired nano-flower. Atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM), were employed to obtain morphology and nano-structure of the films. Optical characteristics of silver chiral nano-flower thin films were obtained using single beam spectrophotometer with both s- and p-polarization incident light at 30{sup o} and 70{sup o} incidence angles and at different azimuthal angles ({phi}). Optical spectra showed both TM (TDM (transverse dipole mode) and TQM (transverse quadruple mode)) and LM (longitudinal mode) Plasmon resonance peaks. For 3- and 4-fold symmetry chiral nano-flowers the s-polarization extinction spectra obtained at different azimuthal angles did not show significant change in the Plasmon peak position while 5-fold symmetry chiral nano-flower showed a completely different behavior, which may be the result of increased surface anisotropy, so when the {phi} angle is changed the s-polarization response from the surface can change more significantly than that for lower symmetries. In general, for 3-, 4- and 5-fold symmetry chiral nano-flowers a sharp peak at lower wavelengths (<450 nm) is observed in the s-polarization spectra, while in addition to this peak a broad peak at longer wavelengths (i.e., LM) observed in the p-polarization spectra, which is more dominant for 70{sup o} incidence angle.

  3. O impacto da genética na asma infantil Impact of genetics in childhood asthma

    Leonardo A. Pinto

    2008-08-01

    Full Text Available OBJETIVO: Apresentar os resultados dos estudos mais importantes e recentes sobre a genética da asma. Estes dados devem auxiliar os clínicos gerais a compreender o impacto da genética sobre este distúrbio complexo e como os genes e polimorfismos influenciam a asma e a atopia. FONTES DOS DADOS: Os dados foram coletados do banco de dados MEDLINE. Os estudos de associação genética foram selecionados do Genetic Association Database, um repositório de estudos de associação genética de doenças e distúrbios complexos organizado pelo National Institutes of Health. SÍNTESE DOS DADOS: Considerando os dados de diversos importantes estudos de gêmeos sobre a genética da asma, a heritabilidade, que mensura a contribuição dos fatores genéticos para a variância da asma, pode ser estimada entre 0,48 e 0,79. Uma grande quantidade de estudos de associação genética tentou identificar genes de susceptibilidade à asma. Os resultados mais replicados nos estudos de associação genética envolvem as cinco regiões do genoma humano a seguir: 5q31-32, 6p21, 11q12-13, 16p11-12, e 20p13. Recentemente, outro gene de susceptibilidade à asma (ORMDL3, considerado determinante crítico para a asma infantil, foi identificado por um estudo genômico de associação. CONCLUSÕES: É possível estimar que a contribuição genética à asma varia entre 48 e 79%. Diversos loci parecem influenciar a susceptibilidade à asma. Os genes localizados no cromossomo 5q (ADRB2, IL13 e IL4 e o gene ORMDL3, no cromossomo 17, identificado recentemente, parecem ser determinantes para a asma infantil. O diagnóstico e a farmacogenética podem ser as primeiras implicações clínicas de estudos extensivos sobre a genética da asma.OBJECTIVE: To present the most important and recent results of studies on asthma genetics. These data may help general physicians understand the impact of genetics on this complex disorder and how genes and polymorphisms influence asthma and atopy

  4. Interaction of NANOS2 and NANOS3 with different components of the CNOT complex may contribute to the functional differences in mouse male germ cells

    Atsushi Suzuki

    2014-11-01

    Full Text Available NANOS2 and NANOS3 belong to the Nanos family of proteins that contain a conserved zinc finger domain, which consists of two consecutive CCHC-type zinc finger motifs, and contribute to germ cell development in mice. Previous studies indicate that there are redundant and distinct functions of these two proteins. NANOS2 rescues NANOS3 functions in the maintenance of primordial germ cells, whereas NANOS3 fails to replace NANOS2 functions in the male germ cell pathway. However, the lack of a conditional allele of Nanos3 has hampered delineation of each contribution of NANOS2 and NANOS3 to the male germ cell pathway. In addition, the molecular mechanism underlying the distinct functions of these proteins remains unexplored. Here, we report an unexpected observation of a transgenic mouse line expressing a NANOS2 variant harboring mutations in the zinc finger domain. Transcription of Nanos2 and Nanos3 was strongly compromised in the presence of this transgene, which resulted in the mimicking of the Nanos2/Nanos3 double-null condition in the male gonad. In these transgenic mice, P-bodies involved in RNA metabolism had disappeared and germ cell differentiation was more severely affected than that in Nanos2-null mice, indicating that NANOS3 partially substitutes for NANOS2 functions. In addition, similar to NANOS2, we found that NANOS3 associated with the CCR4-NOT deadenylation complex but via a direct interaction with CNOT8, unlike CNOT1 in the case of NANOS2. This alternate interaction might account for the molecular basis of the functional redundancy and differences in NANOS2 and NANOS3 functions.

  5. Flame Retardant Effect of Nano Fillers on Polydimethylsiloxane Composites.

    Jagdale, Pravin; Salimpour, Samera; Islam, Md Hujjatul; Cuttica, Fabio; Hernandez, Francisco C Robles; Tagliaferro, Alberto; Frache, Alberto

    2018-02-01

    Polydimethylsiloxane has exceptional fire retardancy characteristics, which make it a popular polymer in flame retardancy applications. Flame retardancy of polydimethylsiloxane with different nano fillers was studied. Polydimethylsiloxane composite fire property varies because of the shape, size, density, and chemical nature of nano fillers. In house made carbon and bismuth oxide nano fillers were used in polydimethylsiloxane composite. Carbon from biochar (carbonised bamboo) and a carbon by-product (carbon soot) were selected. For comparative study of nano fillers, standard commercial multiwall carbon nano tubes (functionalised, graphitised and pristine) as nano fillers were selected. Nano fillers in polydimethylsiloxane positively affects their fire retardant properties such as total smoke release, peak heat release rate, and time to ignition. Charring and surface ceramization are the main reasons for such improvement. Nano fillers in polydimethylsiloxane may affect the thermal mobility of polymer chains, which can directly affect the time to ignition. The study concludes that the addition of pristine multiwall carbon nano tubes and bismuth oxide nano particles as filler in polydimethylsiloxane composite improves the fire retardant property.

  6. The nano-science of C60 molecule

    Rafii-Tabar, H.

    2002-01-01

    Over the past few years, nano-science and its associated nano-technology have emerged into prominence in research institutions across the world. They have brought about new scientific and engineering paradigms, allowing for the manipulation of single atoms and molecules, designing and fabricating new materials, atom-by-atom, and devices that operate on significantly reduced time and length scales. One important area of research in nano-science and nano technology is carbon-based physics in the form of fullerene physics. The C 6 0 molecule, and other cage-like fullerenes, together with carbon nano tubes provide objects that can be combined to generate three-dimensional functional structures for use in the anticipated nano-technology of future. The unique properties of C 6 0 can also be exploited in designing nano-phase thin films with applications in nano-scope device technology and processes such as nano-lithography. This requires a deep understanding of the highly complex process of adsorption of this molecule on a variety of substrates. We review the field of nano-scale nucleation and growth of C 6 0 molecules on some of the technologically important substrates. In addition to experimental results, the results of a set of highly accurate computational simulations are also reported

  7. The Development of the Genital Psoriasis Sexual Frequency Questionnaire (GenPs-SFQ) to Assess the Impact of Genital Psoriasis on Sexual Health.

    Gottlieb, Alice B; Kirby, Brian; Ryan, Caitriona; Naegeli, April N; Burge, Russel; Potts Bleakman, Alison; Anatchkova, Milena D; Cather, Jennifer

    2018-03-01

    Patient-reported outcome measures (PROs) exist for psoriasis but not genital psoriasis (GenPs). This cross-sectional, qualitative study in patients with moderate-to-severe GenPs was conducted to support development of a PRO for measuring the impact of GenPs on sexual activity and to establish content validity. The impacts of GenPs were identified in a literature review. Findings from the literature review were discussed with clinicians, and then patients with GenPs were interviewed. From the literature review, 52 articles, 44 abstracts, and 41 clinical trials met predefined search criteria. Of these, 11 concepts emerged as having theoretical support for use as measurable impacts of psoriasis symptoms on patients; these concepts included sexual functioning and general health-related quality of life (HRQoL). These concepts were confirmed and expanded upon by two clinicians who routinely care for patients with GenPs. Interviews were then conducted with GenPs patients (n = 20) to discuss the impact of GenPs on their HRQoL. Eighty percent of patients reported that GenPs impacted sexual frequency. The two-item GenPs Sexual Frequency Questionnaire (GenPs-SFQ) was developed to assess limitations on sexual activity frequency because of GenPs. Cognitive debriefing with an additional 50 patients with GenPs confirmed the utility and understandability of the GenPs-SFQ. The GenPs-SFQ may have utility in clinical trials involving GenPs patients and in routine clinical practice. Eli Lilly and Company. Plain language summary available for this article.

  8. Genética, performance física humana e doping genético: o senso comum versus a realidade científica

    Rodrigo Gonçalves Dias

    2011-02-01

    Full Text Available Atletas de elite são reconhecidos como fenômenos esportivos e o potencial para atingir níveis superiores de performance no esporte está parcialmente sob o controle de genes. A excelência atlética é essencialmente multifatorial e determinada por complexas interações entre fatores ambientais e genéticos. Existem aproximadamente 10 milhões de variantes genéticas dispersas por todo o genoma humano e uma parcela destas variantes têm demonstrado influenciar a responsividade ao treinamento físico. Os fenótipos de performance física humana parecem ser altamente poligênicos e alguns estudos têm comprovado a existência de raras combinações genotípicas em atletas. No entanto, os mecanismos pelos quais genes se interagem para amplificar a performance física são desconhecidos. O conhecimento sobre os genes que influenciam a treinabilidade somado ao potencial uso indevido dos avanços da terapia gênica, como a possível introdução de genes em células de atletas, fez surgir o termo doping genético, um novo e censurado método de amplificação da performance física, além dos limites fisiológicos. Aumentos na hipertrofia muscular esquelética e nos níveis de hematócrito estão sendo conseguidos através da manipulação da expressão de genes específicos, mas a grande parte das impressionáveis alterações foi obtida em experimentação com animais de laboratório. A compreensão dos resultados científicos envolvendo genética, performance física humana e doping genético é uma difícil tarefa. Com o propósito de evitar a contínua má interpretação e propagação de conceitos errôneos, esta revisão, intencionalmente, vem discutir as evidências científicas produzidas até o momento sobre o tema, permitindo a compreensão do atual "estado da arte"

  9. Applications of Nano palm oil fuel ash and Nano fly ash in concrete

    Hamada, Hussein M.; Jokhio, Gul Ahmed; Mat Yahaya, Fadzil; Humada, Ali M.

    2018-04-01

    This paper discusses the applications of Nano waste materials including palm oil fuel ash and fly ash in the concrete production. The implementation of nanotechnology has been instrumental in the development of significant interest among the stakeholders to improve the mechanical and chemical properties of materials involved in the production of concrete. Although many researchers have shown the potential of nanomaterials to increase strength and durability of concrete and improve its physical and chemical properties, there is still a knowledge gap regarding the preparation of Nano waste materials from agricultural waste to use as cement replacement instead of non-renewable materials. Therefore, it should be focused on to study Nano- waste materials to benefit from these characteristics during preparation of concrete mixtures. Therefore, this paper highlights the potential of waste materials in the Nano size to partially replace cement in concrete and achieve the same or better result than the traditional concrete. This paper recommends to conduct further experimental works to improve the concrete material properties by investigating the properties of waste materials in Nano size.

  10. Genetic similarity between coriander genotypes using ISSR markers Similaridade genética entre genótipos de coentro por marcadores ISSR

    Roberto de A Melo

    2011-12-01

    Full Text Available With the development of new cultivars, a precise genetic characterization is essential for improvement programs or for cultivar registration and protection. Molecular markers have been complementing the traditional morphological and agronomic characterization techniques because they are virtually unlimited, cover the whole genome and are not environmentally influenced. Genetic characterization constitutes the basis for studies involving estimates of genetic similarity. Therefore, the objective of the present study was to evaluate the genetic similarity between ten coriander genotypes (nine cultivars and one line using ISSR markers. The cultivars used were: Americano, Asteca, Palmeira, Português, Santo, Supéria, Tabocas, Tapacurá, Verdão and the experimental line HTV-9299. The genetic similarity between the cultivars was estimated using 227 banded regions of ISSR molecular markers. The UBC 897 oligonucleotide generated the highest number of fragments (16, resulting in a higher polymorphism. The results indicate that the twenty-nine oligonucleotides chosen were satisfactory for detecting polymorphism. Based on the grouping analysis determined from the similarity data, there were two groups and two sub-groups. The calculated similarity for the genotypes varied from 52 to 75%. The lowest similarity was observed between Português and Verdão, at 52%. The highest similarity was found between Português and Palmeira, at 75%. The ISSR is efficient for identifying DNA polymorphism in coriander.Com o surgimento de novas cultivares, uma caracterização genética precisa é essencial, visando à utilização em programas de melhoramento ou para fins de registros e ou proteção de cultivares. Marcadores moleculares vêm complementando a caracterização morfológica e agronômica tradicional, uma vez que são virtualmente ilimitados, cobrem todo o genoma e não são influenciados pelo ambiente. A caracterização genética constitui a base para

  11. Variabilidad genética de la respuesta inflamatoria: I. Polimorfismo -511 C/T en el gen IL1β en diferentes subpoblaciones peruanas

    Óscar Acosta

    2012-07-01

    Full Text Available El polimorfismo -511 citosina/timina (-511 C/T en la región promotora del gen interleuquina 1 beta (IL1β estα implicado en la producciσn diferencial de la citoquina y por tanto puede estar asociado a la respuesta inmuno-inflamatoria en obesidad, dislipidemias, cardiopatías, cáncer, infecciones, y el tratamiento con nutrientes y fármacos. Objetivos: Establecer la distribución de frecuencias de los genotipos y alelos del polimorfismo -511 C/T del gen IL1β en diferentes subpoblaciones peruanas. Diseño: Estudio descriptivo, observacional, transversal. Instituciones: Centro de Investigación de Bioquímica y Nutrición e Instituto de Medicina Tropical D.A. Carrión, Facultad de Medicina, UNMSM y Centro de Genética y Biología Molecular, Facultad de Medicina, USMP, Lima, Perú. Participantes: Pobladores peruanos. Intervenciones: Extracción de ADN genómico a partir de muestras sanguíneas o epitelio bucal según metodología estándar, de 168 individuos de 9 grupos subpoblacionales: 23 mestizos de Lima, 33 amazónicos (20 de Pucallpa y 13 de Amazonas y 112 andinos (12 de Ancash, 10 de Cajamarca, 18 de Huarochirí-Lima, 25 de Puno-Taquile, 25 de Puno-Uros y 22 de Puno-Anapia. Análisis del polimorfismo -511 C/T mediante la técnica de PCR/RFLP, con primers específicos y digestión con la enzima de restricción AvaI, detectándose los fragmentos por electroforesis en geles de agarosa al 2% y tinción con bromuro de etidio. Principales medidas de resultados: Frecuencias genotípicas y alélicas del gen IL1β. Resultados: Se encontró las siguientes frecuencias genotípicas CC=0,024; CT=0,369 y TT=0,607, consistentes con el equilibrio de Hardy-Weinberg; y las frecuencias alélicas fueron alelo C=0,208 y aleloT= 0,792. La frecuencia del alelo T, considerado el mutante, fue muy alta en los Uros de Puno (0.940 y más baja en los mestizos de Lima (0.609. La comparación de las frecuencias genotípicas (TT versus CT+CC y alélicas (T versus C

  12. Bioinspiration From Nano to Micro Scales

    2012-01-01

    Methods in bioinspiration and biomimicking have been around for a long time. However, due to current advances in modern physical, biological sciences, and technologies, our understanding of the methods have evolved to a new level. This is due not only to the identification of mysterious and fascinating phenomena but also to the understandings of the correlation between the structural factors and the performance based on the latest theoretical, modeling, and experimental technologies. Bioinspiration: From Nano to Micro Scale provides readers with a broad view of the frontiers of research in the area of bioinspiration from the nano to macroscopic scales, particularly in the areas of biomineralization, antifreeze protein, and antifreeze effect. It also covers such methods as the lotus effect and superhydrophobicity, structural colors in animal kingdom and beyond, as well as behavior in ion channels. A number of international experts in related fields have contributed to this book, which offers a comprehensive an...

  13. Thermoelectric properties of silicon nano pillars

    Stranz, Andrej; Soekmen, Uensal; Waag, Andreas; Peiner, Erwin [Institute of Semiconductor Technology, Braunschweig (Germany)

    2010-07-01

    In order to establish silicon as a efficient thermoelectric material, its high thermal conductivity has to be reduced which is feasible, e.g., by nano structuring. Therefore, in this study Si-based sub-micron pillars of various dimensions were investigated. Using anisotropic etching followed by thermal oxidation we could fabricate pillars of diameters <500 nm, about 25 {mu}m in height with aspect ratios of more than 50. The distance between the pillars was varied from 500 nm to 10 micron. Besides the fabrication and structural characterization of sub-micron silicon pillars, and adequate metrology for measuring their thermoelectric properties was implemented. Commercial tungsten probes and self-made gold probes, as well as Wollaston wire probes were used for electrical and thermal conductivity, as well as Seebeck voltage measurements on single pillars in a scanning electron microscope equipped with nano manipulators.

  14. Dynamics of magnetic nano-particle assembly

    Kondratyev, V N

    2010-01-01

    Ferromagnetically coupled nano-particle assembly is analyzed accounting for inter- and intra- particle electronic structures within the randomly jumping interacting moments model including quantum fluctuations due to the discrete levels and disorder. At the magnetic jump anomalies caused by quantization the magnetic state equation and phase diagram are found to indicate an existence of spinodal regions and critical points. Arrays of magnetized nano-particles with multiple magnetic response anomalies are predicted to display some specific features. In a case of weak coupling such arrays exhibit the well-separated instability regions surrounding the anomaly positions. With increasing coupling we observe further structure modification, plausibly, of bifurcation type. At strong coupling the dynamical instability region become wide while the stable regime arises as a narrow islands at small disorders. It is shown that exploring correlations of magnetic noise amplitudes represents convenient analytical tool for quantitative definition, description and study of supermagnetism, as well as self-organized criticality.

  15. Nano-photonics: past and present

    Szu, Harold

    2010-04-01

    Nanotech is at the scale of 10-9 meters, located at the mesocopic transition phase, which can take both classical mechanics (CM) and quantum mechanics (QM) descriptions bridging ten orders of magnitude phenomena, between the microscopic world of a single atom at 10-10 meters with the macroscopic world at meters. However, QM principles aid the understanding of any unusual property at the nanotech level. The other major difference between nano-photonics and other forms of optics is that the nano-scale is not very 'hands on'. For the most part, we will not be able to see the components with our naked eyes, but will be required to use some nanotech imaging tools, as follows:

  16. Manufacture of Nano Structures in Polymer Material

    Hansen, Hans Nørgaard; Pedersen, H.C.; Staun, Jacob

    2003-01-01

    The incorporation of micro and nano technology into the products of the future is an area of increasing interest. The ideas for new products based on this technology often take their starting point in specific scientific fields whereas the subsequent design and product development not necessarily...... is based on a systematic approach including manufacturing processes and production system capabilities. The process chain associated with micro and nano injection moulding usually comprises silicon or photoresist mastering, electroforming and polymer processing. Additionally, if the produced polymer...... components are to be used in a microsystem, subsequent handling and assembly is necessary. The present paper describes the process chain related to the manufacture of optical gratings with nanometer-sized structures. The problems of each process step and the challenges of establishing a coherent production...

  17. Heat Conduction of Air in Nano Spacing

    Zhang Yao-Zhong

    2009-01-01

    Full Text Available Abstract The scale effect of heat conduction of air in nano spacing (NS is very important for nanodevices to improve their life and efficiency. By constructing a special technique, the changes of heat conduction of air were studied by means of measuring the heat conduction with heat conduction instrument in NS between the hot plate and the cooling plate. Carbon nanotubes were used to produce the nano spacing. The results show that when the spacing is small down to nanometer scale, heat conduction plays a prominent role in NS. It was found that the thickness of air is a non-linear parameter for demarcating the heat conduction of air in NS and the rate of heat conduction in unit area could be regard as a typical parameter for the heat conduction characterization at nanometer scale.

  18. Nano silicon for lithium-ion batteries

    Holzapfel, Michael; Buqa, Hilmi; Hardwick, Laurence J.; Hahn, Matthias; Wuersig, Andreas; Scheifele, Werner; Novak, Petr; Koetz, Ruediger; Veit, Claudia; Petrat, Frank-Martin

    2006-01-01

    New results for two types of nano-size silicon, prepared via thermal vapour deposition either with or without a graphite substrate are presented. Their superior reversible charge capacity and cycle life as negative electrode material for lithium-ion batteries have already been shown in previous work. Here the lithiation reaction of the materials is investigated more closely via different electrochemical in situ techniques: Raman spectroscopy, dilatometry and differential electrochemical mass spectrometry (DEMS). The Si/graphite compound material shows relatively high kinetics upon discharge. The moderate relative volume change and low gas evolution of the nano silicon based electrode, both being important points for a possible future use in real batteries, are discussed with respect to a standard graphite electrode

  19. Optimal trading strategy for GenCo in LMP-based and bilateral ...

    GenCo) in multi-market environment including day-ahead spot and long term bilateral contract markets using self-organising hierarchical particle swarm optimisation with time-varying acceleration coefficients (SPSO-TVAC). The proposed trading ...

  20. Todos iguais, todos diferentes : a variabilidade genética humana.

    Lima, Manuela

    2010-01-01

    A secção Biologia é coordenada pelo Professor Universitário Armindo Rodrigues. O estudo da variabilidade genética humana revela informações cruciais que permitem, ao nível biomédico, avanços nos conhecimentos acerca de várias doenças.

  1. Saying Hello World with GrGen.NET - A Solution to the TTC 2011 Instructive Case

    Sebastian Buchwald

    2011-11-01

    Full Text Available We introduce the graph transformation tool GrGen.NET (www.grgen.net by solving the Hello World Case of the Transformation Tool Contest 2011 which consists of a collection of small transformation tasks; for each task a section is given explaining our implementation.

  2. pGenN, a Gene Normalization Tool for Plant Genes and Proteins in Scientific Literature

    Ding, Ruoyao; Arighi, Cecilia N.; Lee, Jung-Youn; Wu, Cathy H.; Vijay-Shanker, K.

    2015-01-01

    Background Automatically detecting gene/protein names in the literature and connecting them to databases records, also known as gene normalization, provides a means to structure the information buried in free-text literature. Gene normalization is critical for improving the coverage of annotation in the databases, and is an essential component of many text mining systems and database curation pipelines. Methods In this manuscript, we describe a gene normalization system specifically tailored for plant species, called pGenN (pivot-based Gene Normalization). The system consists of three steps: dictionary-based gene mention detection, species assignment, and intra species normalization. We have developed new heuristics to improve each of these phases. Results We evaluated the performance of pGenN on an in-house expertly annotated corpus consisting of 104 plant relevant abstracts. Our system achieved an F-value of 88.9% (Precision 90.9% and Recall 87.2%) on this corpus, outperforming state-of-art systems presented in BioCreative III. We have processed over 440,000 plant-related Medline abstracts using pGenN. The gene normalization results are stored in a local database for direct query from the pGenN web interface (proteininformationresource.org/pgenn/). The annotated literature corpus is also publicly available through the PIR text mining portal (proteininformationresource.org/iprolink/). PMID:26258475

  3. Baltileuctra gen. nov., a new genus of Leuctridae (Insecta: Plecoptera) in Baltic amber.

    Chen, Zhi-Teng

    2018-04-10

    A new genus and species of the stonefly family Leuctridae, Baltileuctra foraminis gen. et sp. nov., is described and illustrated based on a well-preserved male specimen from the Eocene Baltic amber. The new genus possesses typical characters of Leuctridae but has diagnostic characters of the thoracic sclerites and terminalia. The relationship between the new genus and other leuctrids is briefly discussed.

  4. NextGen Flight Deck Data Comm : Auxiliary Synthetic Speech Phase II

    2015-07-01

    Data Comma text-based controller-pilot communication systemis expected to yield several NextGen safety and efficiency benefits. With Data Comm, communication becomes a visual task, and may potentially increase head-down time on the flight deck ...

  5. Fachsprachlichkeit und Verständlichkeit in deutschen Verträgen

    Larsen, Aase Voldgaard

    2010-01-01

    In diesem Beitrag wird die Fachsprachlichkeit und Verständlichkeit in deutschen Verträgen thematisiert. Der Beitrag basiert auf einer Untersuchung, die im Rahmen meiner Dissertation durchgeführt wurde. Sie trägt den Titel „Faglighed og forståelighed i kontrakter. En undersøgelse af sproglige fors...

  6. Neocordana gen. nov.,the causal organism of Cordana leaf spot on banana

    Hernández-Restrepo, Margarita; Groenewald, Johannes Z.; Crous, Pedro W.

    2015-01-01

    Cordana leaf spot of banana is shown to be associated with several species of a new genus described here as Neocordana gen. nov. Furthermore, Neocordana belongs to Pyriculariaceae (Magnaporthales) rather than Cordanaceae where the type species of Cordana, C. pauciseptata resides. Neocordana is

  7. Pacaella massiliensis gen. nov., sp. nov., a new bacterial species isolated from the human gut

    S. Ndongo

    2017-03-01

    Full Text Available Herein, we report the main characteristics of a new species named Pacaella massiliensis gen. nov., sp. nov., strain Marseille-P2670T (CSUR P2670 that was isolated from the gut microbiota of a 45-year-old French patient.

  8. Gen Y Recruitment: Understanding Graduate Intentions to Join an Organisation Using the Theory of Planned Behaviour

    Warmerdam, Amanda; Lewis, Ioni; Banks, Tamara

    2015-01-01

    Purpose: Using the Theory of Planned Behaviour (TPB) framework, the purpose of this paper is to explore whether the standard TPB constructs explained variance in Generation Y (Gen Y) individuals' intentions to join their ideal organisation. Design/methodology/approach: A mixed methods approach was used featuring qualitative and quantitative…

  9. Crystal Structure of a Eukaryotic GEN1 Resolving Enzyme Bound to DNA

    Yijin Liu

    2015-12-01

    Full Text Available We present the crystal structure of the junction-resolving enzyme GEN1 bound to DNA at 2.5 Å resolution. The structure of the GEN1 protein reveals it to have an elaborated FEN-XPG family fold that is modified for its role in four-way junction resolution. The functional unit in the crystal is a monomer of active GEN1 bound to the product of resolution cleavage, with an extensive DNA binding interface for both helical arms. Within the crystal lattice, a GEN1 dimer interface juxtaposes two products, whereby they can be reconnected into a four-way junction, the structure of which agrees with that determined in solution. The reconnection requires some opening of the DNA structure at the center, in agreement with permanganate probing and 2-aminopurine fluorescence. The structure shows that a relaxation of the DNA structure accompanies cleavage, suggesting how second-strand cleavage is accelerated to ensure productive resolution of the junction.

  10. StateGEN/StateNET - A structured method to perform route comparisons

    Cashwell, J.W.; Erickson, C.M.

    1989-01-01

    StateGEN/StateNET is a modeling structure and routing algorithm designed expressly to address the needs of state and local governments to perform analyses of routing alternatives. StateGEN/StateNET is designed to permit the user to construct a network and assign attributes of interest to the network on a personal computer (PC). The completed network is then transferred via a modem to the TRANSNET system and the preferred route is determined based upon attribute weights assigned by the user. This modeling structure permits the state or local government to perform a routing analysis, such as that required by the US Department of Transportation (DOT) for Highway Route-Controlled Quantity shipments of radioactive materials, with a minimum of resources. StateGEN/StateNET provides a computerized version of the DOT guidelines or allows the user to structure their own network parameters. Sandia National Laboratories (SNL) is the Department of Energy (DOE) lead organization for transportation research and development. The DOE Office of Defense Programs has been the prime sponsor of development of models and associated databases used to analyze the impacts of the transportation of radioactive materials. The routing algorithms used in StateGEN/StateNET were based on the existing models on TRANSNET, a system which was developed to enable outside users to access analytical codes and associated data developed for the DOE

  11. Overview of NASA's Next Generation Air Transportation System (NextGen) Research

    Swenson, Harry N.

    2009-01-01

    This slide presentation is an overview of the research for the Next Generation Air Transportation System (NextGen). Included is a review of the current air transportation system and the challenges of air transportation research. Also included is a review of the current research highlights and significant accomplishments.

  12. GWAS in a box: statistical and visual analytics of structured associations via GenAMap.

    Eric P Xing

    Full Text Available With the continuous improvement in genotyping and molecular phenotyping technology and the decreasing typing cost, it is expected that in a few years, more and more clinical studies of complex diseases will recruit thousands of individuals for pan-omic genetic association analyses. Hence, there is a great need for algorithms and software tools that could scale up to the whole omic level, integrate different omic data, leverage rich structure information, and be easily accessible to non-technical users. We present GenAMap, an interactive analytics software platform that 1 automates the execution of principled machine learning methods that detect genome- and phenome-wide associations among genotypes, gene expression data, and clinical or other macroscopic traits, and 2 provides new visualization tools specifically designed to aid in the exploration of association mapping results. Algorithmically, GenAMap is based on a new paradigm for GWAS and PheWAS analysis, termed structured association mapping, which leverages various structures in the omic data. We demonstrate the function of GenAMap via a case study of the Brem and Kruglyak yeast dataset, and then apply it on a comprehensive eQTL analysis of the NIH heterogeneous stock mice dataset and report some interesting findings. GenAMap is available from http://sailing.cs.cmu.edu/genamap.

  13. GeoBoost: accelerating research involving the geospatial metadata of virus GenBank records.

    Tahsin, Tasnia; Weissenbacher, Davy; O'Connor, Karen; Magge, Arjun; Scotch, Matthew; Gonzalez-Hernandez, Graciela

    2018-05-01

    GeoBoost is a command-line software package developed to address sparse or incomplete metadata in GenBank sequence records that relate to the location of the infected host (LOIH) of viruses. Given a set of GenBank accession numbers corresponding to virus GenBank records, GeoBoost extracts, integrates and normalizes geographic information reflecting the LOIH of the viruses using integrated information from GenBank metadata and related full-text publications. In addition, to facilitate probabilistic geospatial modeling, GeoBoost assigns probability scores for each possible LOIH. Binaries and resources required for running GeoBoost are packed into a single zipped file and freely available for download at https://tinyurl.com/geoboost. A video tutorial is included to help users quickly and easily install and run the software. The software is implemented in Java 1.8, and supported on MS Windows and Linux platforms. gragon@upenn.edu. Supplementary data are available at Bioinformatics online.

  14. Riesgos sobre la salud de los alimentos modificados genéticamente: una revision bibliografica

    Roig José L. Domingo

    2000-01-01

    Full Text Available A lo largo de 1999, se ha venido intensificando el debate sobre la seguridad de los alimentos modificados genéticamente, una importante y compleja área de investigación científica, la cual demanda unos estándares rigurosos. Diversos grupos, incluyendo asociaciones de consumidores y Organizaciones no Gubernamentales (ONGs han sugerido que todos los alimentos modificados genéticamente deberían ser sometidos a estudios a largo plazo con animales antes de su aprobación para el consumo humano. El principal objetivo de la presente revisión ha sido conocer cual es el estado actual de la cuestión en lo referente a los potenciales efectos adversos sobre la salud de los alimentos modificados genéticamente. Dos bases de datos, Medline y Toxline, así como una serie de direcciones de internet, han sido empleadas para la obtención de bibliografía. Aunque son numerosos los comentarios, noticias generales y cartas al Editor aparecidos en prestigiosas revistas, los artículos referentes a estudios experimentales sobre la seguridad de los alimentos modificados genéticamente son, sorprendentemente, muy escasos. Si se han obtenido resultados procedentes de la evaluación toxicológica de estos alimentos, no han sido publicados en revistas científicas y, por lo tanto, no han podido ser debidamente juzgados o contrastados.

  15. StateGEN/StateNET--A structured method to perform route comparisons

    Cashwell, J.W.; Erickson, C.M.

    1989-01-01

    StateGEN/StateNET is a modelling structure and routing algorithm designed expressly to address the needs of state and local governments to perform analyses of routing alternatives. StateGEN/StateNET is designed to permit the user to construct a network and assign attributes of interest to the network on a personal computer (PC). The completed network is then transferred via a modem to the TRANSNET system (Cashwell, 1989) and the preferred route is determined based upon attribute weights assigned by the user. This modelling structure permits the state or local to perform a routing analysis, such as that required by the US Department of Transportation (DOT) for Highway Route-Controlled Quantity shipments of radioactive materials, with a minimum of resources. StateGEN/StateNET provides a computerized version of the DOT guidelines (Cashwell, 1989) or allows the user to structure their own network parameters. Sandia national Laboratories (SNL) is the Department of Energy's (DOE) lead organization for transportation research and development. The DOE Office of Defense Programs has been the prime sponsor of development of models and associated databases used to analyze the impacts of the transportation of radioactive materials. The routing algorithms used in StateGEN/StateNET were based on the existing models on TRANSNET, a system which was developed to enable outside users to access analytical codes and associated data developed for the DOE. 2 refs

  16. Targeted amplicon sequencing (TAS): a scalable next-gen approach to multilocus, multitaxa phylogenetics.

    Bybee, Seth M; Bracken-Grissom, Heather; Haynes, Benjamin D; Hermansen, Russell A; Byers, Robert L; Clement, Mark J; Udall, Joshua A; Wilcox, Edward R; Crandall, Keith A

    2011-01-01

    Next-gen sequencing technologies have revolutionized data collection in genetic studies and advanced genome biology to novel frontiers. However, to date, next-gen technologies have been used principally for whole genome sequencing and transcriptome sequencing. Yet many questions in population genetics and systematics rely on sequencing specific genes of known function or diversity levels. Here, we describe a targeted amplicon sequencing (TAS) approach capitalizing on next-gen capacity to sequence large numbers of targeted gene regions from a large number of samples. Our TAS approach is easily scalable, simple in execution, neither time-nor labor-intensive, relatively inexpensive, and can be applied to a broad diversity of organisms and/or genes. Our TAS approach includes a bioinformatic application, BarcodeCrucher, to take raw next-gen sequence reads and perform quality control checks and convert the data into FASTA format organized by gene and sample, ready for phylogenetic analyses. We demonstrate our approach by sequencing targeted genes of known phylogenetic utility to estimate a phylogeny for the Pancrustacea. We generated data from 44 taxa using 68 different 10-bp multiplexing identifiers. The overall quality of data produced was robust and was informative for phylogeny estimation. The potential for this method to produce copious amounts of data from a single 454 plate (e.g., 325 taxa for 24 loci) significantly reduces sequencing expenses incurred from traditional Sanger sequencing. We further discuss the advantages and disadvantages of this method, while offering suggestions to enhance the approach.

  17. Effect of TMAH Etching Duration on the Formation of Silicon Nano wire Transistor Patterned by AFM Nano lithography

    Hutagalung, S.D.; Lew, K.C.

    2012-01-01

    Atomic force microscopy (AFM) lithography was applied to produce nano scale pattern for silicon nano wire transistor fabrication. This technique takes advantage of imaging facility of AFM and the ability of probe movement controlling over the sample surface to create nano patterns. A conductive AFM tip was used to grow the silicon oxide nano patterns on silicon on insulator (SOI) wafer. The applied tip-sample voltage and writing speed were well controlled in order to form pre-designed silicon oxide nano wire transistor structures. The effect of tetra methyl ammonium hydroxide (TMAH) etching duration on the oxide covered silicon nano wire transistor structure has been investigated. A completed silicon nano wire transistor was obtained by removing the oxide layer via hydrofluoric acid etching process. The fabricated silicon nano wire transistor consists of a silicon nano wire that acts as a channel with source and drain pads. A lateral gate pad with a nano wire head was fabricated very close to the channel in the formation of transistor structures. (author)

  18. Effects of incorporation of nano-fluorapatite or nano-fluorohydroxyapatite on a resin-modified glass ionomer cement.

    Lin, Jun; Zhu, Jiajun; Gu, Xiaoxia; Wen, Wenjian; Li, Qingshan; Fischer-Brandies, Helge; Wang, Huiming; Mehl, Christian

    2011-03-01

    This study aimed to investigate the fluoride release properties and the effect on bond strength of two experimental adhesive cements. Synthesized particles of nano-fluorapatite (nano-FA) or nano-fluorohydroxyapatite (nano-FHA) were incorporated into a resin-modified glass ionomer cement (Fuji Ortho LC) and characterized using X-ray diffraction and scanning electron microscopy. Blocks with six different concentrations of nano-FA or nano-FHA were manufactured and their fluoride release properties evaluated by ultraviolet spectrophotometry. The unaltered glass ionomer cement Fuji Ortho LC (GC, control) and the two experimental cements with the highest fluoride release capacities (nano-FA+Fuji Ortho LC (GFA) and nano-FHA+Fuji Ortho LC (GFHA)) were used to bond composite blocks and orthodontic brackets to human enamel. After 24 h water storage all specimens were debonded, measuring the micro-tensile bond strength (μTBS) and the shear bond strength (SBS), respectively. The optimal concentration of added nano-FA and nano-FHA for maximum fluoride release was 25 wt.%, which nearly tripled fluoride release after 70 days compared with the control group. GC exhibited a significantly higher SBS than GFHA/GFA, with GFHA and GFA not differing significantly (P>0.05). The μTBS of GC and GFA were significantly higher than that of GFHA (P≤0.05). The results seem to indicate that the fluoride release properties of Fuji Ortho LC are improved by incorporating nano-FA or nano-FHA, simultaneously maintaining a clinically sufficient bond strength when nano-FA was added. Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  19. Multifunctional magnetic nano/microparticles for bioapplications

    Horák, Daniel; Babič, Michal; Jendelová, Pavla; Herynek, V.

    2010-01-01

    Roč. 26, č. 2 (2010), s. 38 ISSN 0233-7657. [Bridges in Life Sciences, Annual Scientific Meeting Regional Cooperation for Health, Science and Technology /5./. 09.04.2010-11.04.2010, Lviv] R&D Projects: GA MŠk 2B06053 Institutional research plan: CEZ:AV0Z40500505 Keywords : magnetic * nano particle * microsphere Subject RIV: EE - Microbiology, Virology

  20. Method for producing nano-embedded microparticles

    2015-01-01

    of the invention. (FR)La présente invention concerne un procédé rapide, à haut rendement et continu de production de nano-microparticules intégrées sous forme de poudre, ce qui permet d'obtenir un procédé économique qui peut être mis en oeuvre de manière aseptique. L'invention concerne, en outre, un appareil pour...

  1. Asphaltenes-based polymer nano-composites

    Bowen, III, Daniel E

    2013-12-17

    Inventive composite materials are provided. The composite is preferably a nano-composite, and comprises an asphaltene, or a mixture of asphaltenes, blended with a polymer. The polymer can be any polymer in need of altered properties, including those selected from the group consisting of epoxies, acrylics, urethanes, silicones, cyanoacrylates, vulcanized rubber, phenol-formaldehyde, melamine-formaldehyde, urea-formaldehyde, imides, esters, cyanate esters, allyl resins.

  2. Polimorfismos del gen ob en bovinos de raza holstein en la Comarca Lagunera, México

    Sarai S. Mendoza-Retana

    2017-01-01

    Full Text Available La Comarca Lagunera es la cuenca lechera más importante de México. En la actualidad se están utilizando diversas técnicas que permiten evaluar genéticamente el animal a una edad temprana, permitiendo seleccionar futuros reproductores con características deseables. Entre los genes relacionados con la producción de leche, se encuentran el gen Ob también llamado gen Leptina el cual actúa sobre el sistema nervioso central y tejidos periféricos jugando un papel muy importante en la modulación regulación del apetito, ganancia de peso vivo, incremento del metabolismo energético y el anabolismo muscular. Este trabajo se realizó para determinar el polimorfismo de longitud del fragmento de restricción ACI I de gen leptina en el exón 2 y correlacionarlo con los parámetros de producción y calidad de leche. Se recolectaron 100 muestra de sangre de vacas en producción del establo “Lácteos Florida” de Francisco I. Madero municipio de Coahuila, México con tres esta tus de producción: altas, medias y bajas La extracción de ADN se realizó por el método modificado de Salting - Out. Se realizó PCR del gen leptina originando un fragmento de 272 bp de longitud y se realizó PCR - RFLP con la enzima de restricción ACI I y secue nciación, correlacionando los genotipos TT, CT Y CC con tres estatus de producción de leche: altas, medias, bajas. El análisis estadístico indicó que las vacas portadoras del genotipo homocigoto (TT tienen un efecto significativo (P<0.01 con respecto a l as características de producción y calidad de leche ya que tuvieron un mayor consumo de alimento, ganancia de peso, además de una elevada producción de leche en comparación a los genotipos heterocigoto (CT y homocigoto (CC. Los resultados obtenidos muest ran que l a identificación molecular de polimorfismos del gen Ob puede usarse como herramienta de selección genética en bovinos de raza Holstein.

  3. Environmental Information for the U.S. Next Generation Air Transportation System (NextGen)

    Murray, J.; Miner, C.; Pace, D.; Minnis, P.; Mecikalski, J.; Feltz, W.; Johnson, D.; Iskendarian, H.; Haynes, J.

    2009-09-01

    It is estimated that weather is responsible for approximately 70% of all air traffic delays and cancellations in the United States. Annually, this produces an overall economic loss of nearly 40B. The FAA and NASA have determined that weather impacts and other environmental constraints on the U.S. National Airspace System (NAS) will increase to the point of system unsustainability unless the NAS is radically transformed. A Next Generation Air Transportation System (NextGen) is planned to accommodate the anticipated demand for increased system capacity and the super-density operations that this transformation will entail. The heart of the environmental information component that is being developed for NextGen will be a 4-dimensional data cube which will include a single authoritative source comprising probabilistic weather information for NextGen Air Traffic Management (ATM) systems. Aviation weather constraints and safety hazards typically comprise meso-scale, storm-scale and microscale observables that can significantly impact both terminal and enroute aviation operations. With these operational impacts in mind, functional and performance requirements for the NextGen weather system were established which require significant improvements in observation and forecasting capabilities. This will include satellite observations from geostationary and/or polar-orbiting hyperspectral sounders, multi-spectral imagers, lightning mappers, space weather monitors and other environmental observing systems. It will also require improved in situ and remotely sensed observations from ground-based and airborne systems. These observations will be used to better understand and to develop forecasting applications for convective weather, in-flight icing, turbulence, ceilings and visibility, volcanic ash, space weather and the environmental impacts of aviation. Cutting-edge collaborative research efforts and results from NASA, NOAA and the FAA which address these phenomena are summarized

  4. The Next Technology Revolution - Nano Electronic Technology

    Turlik, Iwona

    2004-03-01

    Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

  5. Computer simulations for the nano-scale

    Stich, I.

    2007-01-01

    A review of methods for computations for the nano-scale is presented. The paper should provide a convenient starting point into computations for the nano-scale as well as a more in depth presentation for those already working in the field of atomic/molecular-scale modeling. The argument is divided in chapters covering the methods for description of the (i) electrons, (ii) ions, and (iii) techniques for efficient solving of the underlying equations. A fairly broad view is taken covering the Hartree-Fock approximation, density functional techniques and quantum Monte-Carlo techniques for electrons. The customary quantum chemistry methods, such as post Hartree-Fock techniques, are only briefly mentioned. Description of both classical and quantum ions is presented. The techniques cover Ehrenfest, Born-Oppenheimer, and Car-Parrinello dynamics. The strong and weak points of both principal and technical nature are analyzed. In the second part we introduce a number of applications to demonstrate the different approximations and techniques introduced in the first part. They cover a wide range of applications such as non-simple liquids, surfaces, molecule-surface interactions, applications in nano technology, etc. These more in depth presentations, while certainly not exhaustive, should provide information on technical aspects of the simulations, typical parameters used, and ways of analysis of the huge amounts of data generated in these large-scale supercomputer simulations. (author)

  6. Gold nano-particles fixed on glass

    Worsch, Christian; Wisniewski, Wolfgang; Kracker, Michael; Rüssel, Christian

    2012-01-01

    Highlights: ► We produced wear resistant gold–ruby coatings on amorphous substrates. ► Thin sputtered gold layers were covered by or embedded in silica coatings. ► Annealing above T g of the substrate glass led to the formation of gold nano particles. ► A 1 1 1-texture of the gold particles is observed via XRD and EBSD. ► EBSD-patterns can be acquired from crystals covered by a thin layer of glass. - Abstract: A simple process for producing wear resistant gold nano-particle coatings on transparent substrates is proposed. Soda-lime-silica glasses were sputtered with gold and subsequently coated with SiO 2 using a combustion chemical vapor deposition technique. Some samples were first coated with silica, sputtered with gold and then coated with a second layer of silica. The samples were annealed for 20 min at either 550 or 600 °C. This resulted in the formation of round, well separated gold nano-particles with sizes from 15 to 200 nm. The color of the coated glass was equivalent to that of gold–ruby glasses. Silica/gold/silica coatings annealed at 600 °C for 20 min were strongly adherent and scratch resistant. X-ray diffraction and electron backscatter diffraction (EBSD) were used to describe the crystal orientations of the embedded particles. The gold particles are preferably oriented with their (1 1 1) planes perpendicular to the surface.

  7. Nano-education from a European perspective

    Malsch, I

    2008-01-01

    At a global level, educating the nanotechnology workforce has been discussed since the beginning of the new millennium. Scientists, engineers and technicians should be trained in nanotechnology. Most educators prefer training students first in their own discipline at the Bachelor level (physics, chemistry, biology, etc) followed by specialisation in nanoscience and technology at the Master's level. Some favour a broad interdisciplinary basic training in different nanosciences followed by specialisation in a particular application area. What constitutes a good nanoscience curriculum is also being discussed, as well as the application of e-learning methodologies. The European Union is stimulating the development of nanoscience education in universities. The Erasmus Mundus programme is funding nanoscience and nanotechnology education programmes involving universities in several European countries. The policy debate in Europe is moving towards vocational training in nanotechnology for educating the technicians needed in industry and research. The EU vocational training institute CEDEFOP published a report in 2005 The EU funded European gateway to nanotechnology Nanoforum has stimulated the accessibility of nano-education throughout Europe with reports and online databases of education courses and materials. For university education, they list courses at the Bachelor, Master's, and PhD level as well as short courses. The EU funded EuroIndiaNet project also reviewed Nano-education courses at the Master's level, short courses, e-learning programmes, summerschools and vocational training courses. In this presentation, I review Nanoforum and other publications on nano-education in Europe and highlight current trends and gaps

  8. Magnetite nano-islands on Graphene

    Anderson, Nathaniel; Zhang, Qiang; Rosenberg, Richard; Vaknin, David

    X-ray magnetic circular dichroism (XMCD) of ex-situ iron nano-islands grown on graphene reveals that iron oxidation spontaneously leads to the formation of magnetite nano-particles - i.e, the formation of the inverse spinel Fe3O4. Fe islands have been grown with two different heights (20 and 75 MLs) on epitaxial graphene and we have determined their magnetic behavior both as function of temperature and applied external field. Our XAS and XMCD at an applied magnetic field of B = 5 T show that the thin film (20 MLs) is totally converted to magnetite whereas the thicker film (75 MLs) exhibits magnetite properties but also those of pure metal iron. For both samples, temperature dependence of the XMCD shows clear transitions at ~120 K consistent with the Verwey transition of bulk magnetite. XMCD at low temperatures shows a weak hysteresis and provide the average spin and angular-momentum moments, the dipolar term, and the total moment . In addition, manipulation and comparison of the XMCD data from both samples allows us to extract information about the pure iron nano-islands from the thicker sample. Ames Laboratory is supported by the U.S. DOE, BES, MSE Contract No. DE-AC02-07CH11358. APS is supported by U.S. DOE Contract No. DE-AC02-06CH11357.

  9. Development of nano-roughness calibration standards

    Baršić, Gorana; Mahović, Sanjin; Zorc, Hrvoje

    2012-01-01

    At the Laboratory for Precise Measurements of Length, currently the Croatian National Laboratory for Length, unique nano-roughness calibration standards were developed, which have been physically implemented in cooperation with the company MikroMasch Trading OU and the Ruđer Bošković Institute. In this paper, a new design for a calibration standard with two measuring surfaces is presented. One of the surfaces is for the reproduction of roughness parameters, while the other is for the traceability of length units below 50 nm. The nominal values of the groove depths on these measuring surfaces are the same. Thus, a link between the measuring surfaces has been ensured, which makes these standards unique. Furthermore, the calibration standards available on the market are generally designed specifically for individual groups of measuring instrumentation, such as interferometric microscopes, stylus instruments, scanning electron microscopes (SEM) or scanning probe microscopes. In this paper, a new design for nano-roughness standards has been proposed for use in the calibration of optical instruments, as well as for stylus instruments, SEM, atomic force microscopes and scanning tunneling microscopes. Therefore, the development of these new nano-roughness calibration standards greatly contributes to the reproducibility of the results of groove depth measurement as well as the 2D and 3D roughness parameters obtained by various measuring methods. (paper)

  10. Extraction and characterization of cellulose nano whiskers from balsa wood

    Morelli, Carolina L.; Bretas, Rosario E.S.; Marconcini, Jose M.; Pereira, Fabiano V.; Branciforti, Marcia C.

    2011-01-01

    In this study cellulose nano whiskers were obtained from balsa wood. For this purpose, fibers of balsa wood were subjected to hydrolysis reactions for lignin and hemi cellulose digestion and acquisition of nano-scale cellulose. Cellulose nano crystals obtained had medium length and thickness of 176 nm and 7 nm respectively. Infrared spectroscopy and x-ray diffraction showed that the process used for extracting nano whiskers could digest nearly all the lignin and hemi cellulose from the balsa fiber and still preserve the aspect ratio and crystallinity, satisfactory enough for future application in polymer nano composites. Thermogravimetry showed that the onset temperature of thermal degradation of cellulose nano crystals (226 degree C) was higher than the temperature of the balsa fiber (215 degree C), allowing its use in molding processes with many polymers from the molten state.(author)

  11. Drug Delivery Systems: A New Frontier in Nano-technology

    Chamindri Witharana

    2017-09-01

    Full Text Available Nano-technology is a recent advancement in science, defined as “Science, engineering, and technology conducted at the Nano scale” (National nanotechnology initiatives in USA. Applications of Nano-technology cover a vast range from basic material science, personal care applications, agriculture, and medicine. Nano-technology is used in field of medicine for treatment, diagnostic, monitoring, genetic engineering, and drug delivery. There are two main types of Nano Particles (NPs used in drug delivery; organic NPs and inorganic NPs. In drug delivery, the drug-Nano- Particle (NP conjugate should be able to deliver drugs to the target site without degradation in gastrointestinal track and without reducing drug activity. Further, it should attack to target cells without causing any adverse effects. The ultimate goal of NP drug delivery is to improve proper treatment, effectiveness, less side effects with safety and patient adherence as well as reduction in the cost.

  12. Optical and Structural Characterizations of GaN Nano structures

    Shekari, L.; Abu Hassan, H.; Thahab, S.M.

    2011-01-01

    We have grown wurtzite GaN nano wires (NWs) on polished silicon (Si) either with or without Au as catalyst, using commercial GaN powder by thermal evaporation in an atmosphere of argon (Ar) gas. Structural and optical characterizations were performed using high resolution X-ray diffraction (HR-XRD), scanning electron microscopy (SEM), photoluminescence (PL) and energy-dispersive X-ray spectroscopy (EDX) spectroscopy. Results indicate that the nano wires are of single-crystal hexagonal GaN and the nano wires on Si with Au catalyst are more oriented than those without Au catalyst; and using catalyst make the NWs grow much faster and quite well-ordered. The compositional quality of the grown nano wires on the substrates are mostly same, however the nano wires on the Au coated silicon are of low density, while the nano wires on the Si are of high density. (author)

  13. Toughening by nano-scaled twin boundaries in nanocrystals

    Zhou, Haofei; Qu, Shaoxing; Yang, Wei

    2010-01-01

    Joint enhancement on strength and toughness provides a cutting-edge research frontier for metals and alloys. Conventional strengthening methods typically lead to suppressed ductility and fracture toughness. In this study, large-scale atomic simulation on the fracture process is performed featuring nanocrystals embedded with nano-scaled twin boundaries (TBs). Four toughening mechanisms by nano-scaled TBs are identified: (i) crack blunting through dislocation accommodation along the nano-scaled TBs; (ii) crack deflection in a manner of intragranular propagation; (iii) daughter crack formation along the nano-scaled TBs that further enhances the toughness and (iv) curved TB planes owing to an excessive pileup of geometrically necessary dislocations. These toughening mechanisms jointly dictate the mechanical behavior of nano-structured materials, and provide insights into the application of nano-scaled TBs with an aim to simultaneously obtain enhanced strength and toughness. New approaches to introduce these coherent internal defects into the nanostructure of crystalline materials are also proposed

  14. Micro/nano-fabrication technologies for cell biology.

    Qian, Tongcheng; Wang, Yingxiao

    2010-10-01

    Micro/nano-fabrication techniques, such as soft lithography and electrospinning, have been well-developed and widely applied in many research fields in the past decade. Due to the low costs and simple procedures, these techniques have become important and popular for biological studies. In this review, we focus on the studies integrating micro/nano-fabrication work to elucidate the molecular mechanism of signaling transduction in cell biology. We first describe different micro/nano-fabrication technologies, including techniques generating three-dimensional scaffolds for tissue engineering. We then introduce the application of these technologies in manipulating the physical or chemical micro/nano-environment to regulate the cellular behavior and response, such as cell life and death, differentiation, proliferation, and cell migration. Recent advancement in integrating the micro/nano-technologies and live cell imaging are also discussed. Finally, potential schemes in cell biology involving micro/nano-fabrication technologies are proposed to provide perspectives on the future research activities.

  15. Core-shell architectures as nano-size transporters

    Adeli, M.; Zarnegar, Z.; Kabiri, R.; Salimi, F.; Dadkah, A.

    2006-01-01

    Core-shell architectures containing poly (ethylene imine) (PEI) as a core and poly (lactide) (PLA) as arms were prepared. PEI was used as macro initiator for ring opening polymerization of lactide. PEI-PLA core-shell architectures were able to encapsulate guest molecules. Size of the core-shell architectures was between 10- 100 nm, hence they can be considered as nano carriers to transport the guest molecules. Transport capacity of nano carriers depends on their nano-environments and type of self-assembly in solvent. In solid state nano carriers self-assemble as long structures with nano-size diameter or they form network structures. Aggregations type depends on the concentration of nano carriers in solution. Effect of the shell thickness and aggregation type on the release rate are also investigated

  16. Resgate vegetativo por alporquia de genótipos adultos de urucum (Bixa orellana L.

    Nilton César Mantovani

    2010-09-01

    Full Text Available Este trabalho teve por objetivos avaliar a técnica de alporquia visando ao resgate vegetativo de genótipos de urucum (Bixa orellana L. e a obtenção de plantas fornecedoras de propágulos para processos de propagação clonal. Foram utilizadas dez plantas matrizes de urucum, com 12 anos de idade, obtidas partindo do cruzamento artificial entre os genótipos "Fruto Verde Piloso" X "Fruto Vermelho Liso". Os alporques foram realizados em ramos de 1 a 2 cm de diâmetro, utilizando-se como substrato uma mistura de vermiculita e musgo. Foi avaliado o efeito (1 do tipo de anelamento da casca dos ramos (total ou parcial, com 1 cm de comprimento, (2 do AIB (ácido indol-3-butírico a 0 e 4,92 mM aplicado em papel filtro e (3 do tipo de proteção dos alporques (filmes plásticos transparente ou preto ou tecido tencel, no enraizamento de alporque dos dez genótipos. A técnica de alporquia proporcionou o enraizamento de ramos dos dez genótipos avaliados, com eficiência variável de 20 a 100%, havendo efeito do genótipo sobre a frequência de enraizamento. A sobrevivência desses alporques foi de 100% após o plantio quando estes foram produzidos com anelamento total, tratados com AIB e protegidos com plástico transparente. Em casa de vegetação os alporques desenvolveram ramos partindo da brotação de gemas caulinares constituindo estoques de explantes apropriados para serem utilizados como estacas ou como fontes de segmentos nodais para a propagação in vitro desta espécie.

  17. Overview of materials R and D for fusion and Gen-4

    Kohyama, A. [Kyoto Univ., lnstitute of Advanced Energy (Japan); Tavassoli, F.; Carre, F.; Billot, P. [CEA Saclay, 91 - Gif sur Yvette (France); Zinide, S. [Oak Ridge National Laboratory, Materials Science and Technology Div., AK TN (United States)

    2007-07-01

    Full text of publication follows: In view of the growing need for energy, the risk of exhaustion of fossil fuel and the problem of global warming, the nuclear energy is receiving added attention as a realistic and viable advanced solution. International collaborations on Generation IV (Gen-IV) fission reactors and on ITER and DEMO fusion reactors are developing. This is particularly the case in the sector of materials, where they hold the key to success of these systems. The international community has recognized and planned its materials R and D work for Fusion and Gen-IV reactors with the following considerations: 1- The time allotted to materials R and D is short and may not allow development of totally new materials. 2- Activities required, to cover existing materials variations and service conditions necessary for reactor design, are very time consuming. 3- The work to be done must build upon the existing knowledge of materials and avoid duplications. Although ITER for fusion and Generation four International Forum (GIF) for Gen-IV are important international collaborative programs, they are insufficient to meet all the national energy policies of the participating countries. This paper provides an overview of the materials R and D carried out for fusion and Gen-IV reactors at international and national levels. Materials programs discussed include both cross-cutting and reactor specific actions, where major tasks can be defined as: + Cross-cutting materials tasks: - materials for high temperature service; - materials with neutron damage tolerance; - materials behavior analysis and modeling; - high temperature design methodology. + Reactor specific materials tasks: - very high temperature alloys; - carbon, high temperature ceramics and their composites; - materials compatibilities. Starting with a brief introduction of materials R and D strategies, ITER and Broader Approach (BA), overall activities for fusion and GIF for Gen-IV will be reviewed. Domestic

  18. Análisis genético del virus peruano de la fiebre amarilla

    Carlos Yábar V

    2002-01-01

    Full Text Available Objetivo: Determinar las variantes genéticas de aislamientos del virus peruano de la Fiebre Amarilla (FA. Materiales y métodos: la región carboxiterminal del gen de la envoltura (E de cinco aislamientos de FA obtenidas de pacientes provenientes de Ayacucho 1978 (PER1, Junín 1995 (PER2, Cerro de Pasco (PER3, Cusco (1998 y San Martín (1999 fue amplificada por PCR, secuenciada y analizada con programas software de ADN. Resultados: el índice de similaridad de la secuencia de nucleótidos entre los cinco aislamientos reveló valores oscilantes entre 94,3% y 99,3%, mientras que la secuencia de aminoácidos presentó valores entre 97,6% y 99,7% de similaridad. El análisis filogenético demostró una distancia genética entre 0,40 y 6,50 mediante la secuencia de nucleótidos y a través de la secuencia de aminoácidos se observó un rango de 0,30 y 4,29. Sin embargo, las secuencias correspondientes a los sitios de glicosilación y a los epítopes de reconocimiento humoral fueron conservadas entre los cinco aislamientos, con excepción de algunos aislamientos de referencia reportados por otros autores. Conclusiones: los virus de FA peruanos forman un grupo filogenético distinto a otros virus de FA sudamericanos, basados en el análisis genéticos del gen E.

  19. Transformação genética em espécies florestais.

    Claudia Studart-Guimarães

    2010-08-01

    Full Text Available A transformação genética, que compreende a introdução de genes exógenos de forma controlada no genoma de uma célula vegetal e posterior regeneração da planta transgênica, tem contribuído com os programas de melhoramento genético de plantas pela obtenção de genótipos com novas características de interesse. O melhoramento de espécies florestais é limitado por características intrínsecas a tais espécies, como a altura dos indivíduos e o ciclo longo de vida. A transformação genética constitui, portanto, uma alternativa para a obtenção de espécies florestais com características desejáveis em um menor espaço de tempo. Plantas transgênicas com resistência a determinadas pragas, com melhor qualidade de madeira, maior produção de biomassa, tolerância a herbicidas, entre outras características de interesse, já foram obtidas para diferentes espécies florestais de importância econômica como álamo, eucalipto e pinheiros em geral. Este trabalho mostra a importância da transformação genética, associada a outras técnicas biotecnológicas no melhoramento de espécies florestais, as técnicas de transformação mais utilizadas e as características que já foram introduzidas nessas espécies pela transformação.

  20. Genética molecular de caracteres cuantitativos en cruzamientos dialélicos de tomate

    Guillermo Raúl Pratta

    2011-05-01

    Full Text Available El objetivo de este trabajo fue evaluar marcadores moleculares y caracteres cuantitativos en un cruzamiento dialélico completo sin recíprocos, entre cinco líneas recombinantes de tomate y sus híbridos. Se obtuvieron perfiles de AFLP ("amplified fragment length polymorphism" y de polipéptidos del pericarpio en cuatro estados de madurez del fruto de 15 genotipos. Se evaluaron, entre otros: peso, acidez titulable, pH, vida poscosecha y firmeza. Se calculó el porcentaje de polimorfismo para los marcadores moleculares y el porcentaje de variabilidad genética para los caracteres cuantitativos en el grupo de líneas recombinantes, el de híbridos y el conjunto de genotipos. Se realizaron análisis de agrupamiento con cada nivel de variación genética. Para AFLP, el porcentaje de polimorfismo varió entre 34 y 54% y, para los perfiles polipeptídicos, entre 40 y 78%. Mayor polimorfismo fue observado en el grupo de híbridos. La variabilidad genética fue de 100% para acidez y 34% para firmeza, con los mayores valores en los parentales. La similitud genética varió entre los genotipos según el nivel de variación genética; pero la consistencia en el agrupamiento de algunas líneas recombinantes y sus híbridos fue conservada, lo que evidenció asociaciones entre los datos moleculares y fenotípicos.

  1. Next-Gen3: Sequencing, Modeling, and Advanced Biofuels - Final Technical Report

    Zengler, Karsten [Univ. of California, San Diego, CA (United States). Dept. of Pediatrics; Palsson, Bernhard [Univ. of California, San Diego, CA (United States). Dept. of Bioengineering; Lewis, Nathan [Univ. of California, San Diego, CA (United States). Dept. of Pediatrics

    2017-12-27

    Successful, scalable implementation of biofuels is dependent on the efficient and near complete utilization of diverse biomass sources. One approach is to utilize the large recalcitrant biomass fraction (or any organic waste stream) through the thermochemical conversion of organic compounds to syngas, a mixture of carbon monoxide (CO), carbon dioxide (CO2), and hydrogen (H2), which can subsequently be metabolized by acetogenic microorganisms to produce next-gen biofuels. The goal of this proposal was to advance the development of the acetogen Clostridium ljungdahlii as a chassis organism for next-gen biofuel production from cheap, renewable sources and to detail the interconnectivity of metabolism, energy conservation, and regulation of acetogens using next-gen sequencing and next-gen modeling. To achieve this goal we determined optimization of carbon and energy utilization through differential translational efficiency in C. ljungdahlii. Furthermore, we reconstructed a next-generation model of all major cellular processes, such as macromolecular synthesis and transcriptional regulation and deployed this model to predicting proteome allocation, overflow metabolism, and metal requirements in this model acetogen. In addition we explored the evolutionary significance of tRNA operon structure using the next-gen model and determined the optimal operon structure for bioproduction. Our study substantially enhanced the knowledgebaase for chemolithoautotrophs and their potential for advanced biofuel production. It provides next-generation modeling capability, offer innovative tools for genome-scale engineering, and provide novel methods to utilize next-generation models for the design of tunable systems that produce commodity chemicals from inexpensive sources.

  2. Conductive nano composites based on cellulose nano fiber coated poly aniline via in situ polymerization

    Silva, Michael J. da; Sanches, Alex O.; Malmonge, Luiz F.; Malmonge, Jose A.; Medeiros, Eliton S. de; Rosa, Morsyleide F.

    2011-01-01

    Cellulose nano fiber (CNF) was extracted by acid hydrolysis from cotton microfibril and nano composites of CNF/PANI-DBSA were obtained by in situ polymerization of aniline onto CNF. The ratios between DBSA/aniline and aniline/oxidant were varied and the nano composites were characterized by four probes direct current (dc) electrical conductivity, ultraviolet-visible (UV-Vis-NIR) and FTIR spectroscopy and X-ray diffraction (XRD). Electrical conductive about ∼10 -1 S/cm was research and was independent of DBSA/aniline molar ratio between 2-4 and the aniline/oxidant molar ratio between 1-5. X-ray patterns of the samples show crystalline peaks characteristic of cellulose I. The FTIR spectra confirmed the presence of PANI and CNF in all samples. (author)

  3. Light‐driven Nano­‐robotics - Invited Plenary Presentation, IEEE NANO 2016

    Glückstad, Jesper

    ) and pioneering their use in so-called lightdriven nano-robotics. Hence, the aim of our latest R&D is to combine advanced topology optimisation, 3D printing of functionalized materials and light manipulation to demonstrate a structure-mediated micro-tonano coupling paradigm for controlled operation of robotic...... tools overcoming the diffraction limit while still being optically visible and manoeuvrable. 2PP-fabrication can already today create intricate nano-features merged onto larger microstructures that, in turn, are steerable by dynamic light beams. Applying multiple independently controllable laser beam...... traps on these structures will enable real-time light-driven nanorobotics with six-degrees-of-freedom. This sets the stage for new discoveries using calibrated steering of optimally shaped and functionalized nano-tools at the subcellular level and in full 3D - not available in the scientifi c world...

  4. Advanced vectorial simulation of VCSELs with nano structures invited paper

    Chung, Il-Sug; Mørk, Jesper

    2009-01-01

    The single-mode properties and design issues of three vertical-cavity surface-emitting laser (VCSEL) structures incorporating nano structures are rigorously investigated. Nano structuring enables to deliver selective pumping or loss to the fundamental mode as well as stabilizing the output...... polarization state. Comparison of three vectorial simulation methods reveals that the modal expansion method is suitable for treating the nano structured VCSEL designs....

  5. Review on the Synthesis and Applications of Nano materials

    Liu, X.; Tang, Y.; Liang, B.; Zhong, Z.

    2013-01-01

    Recently, Fe 3 O 4 nano materials have attracted tremendous attention because of their favorable electric and magnetic properties. Fe 3 O 4 nano structures with various morphologies have been successfully synthesized and have been used in many fields such as lithium-ion batteries (LIBs), wastewater treatment, and magnetic resonance imaging (MRI) contrast agents. In this paper, we provide an in-depth discussion of recent development of Fe 3 O 4 nano materials, including their effective synthetic methods and potential applications.

  6. [Biomimetic mineralization of rod-like cellulose nano-whiskers and spectrum analysis].

    Qu, Ping; Wang, Xuan; Cui, Xiao-xia; Zhang, Li-ping

    2012-05-01

    Cellulose nano-whiskers/nano-hydroxyapatite composite was prepared with biomimetic mineralization using rod-like cellulose nano-whiskers as template. The cellulose nano-whiskers and cellulose nano-whiskers/nano-hydroxyapatite composite were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope-energy dispersive analysis of X-rays (SEM-EDXA). Variation and distribution of carbon, oxygen, calcium, and phosphorus in the composites were studied. The morphologies and growth mechanism of nano-hydroxyapatite were analyzed. The results showed that nano-hydroxyapatite was formed on the surface of cellulose nano-whiskers; the carbon-oxygen ratio of cellulose nano-whiskers and cellulose nano-whiskers/nano-hydroxyapatite composite was 1.81 and 1.54, respectively; the calcium-phosphorus ratio of the composite was 1.70. The nucleation of nano-hydroxyapatite was around the hydroxyl groups of cellulose nano-whiskers. It is suggested that there is coordination between the hydroxyl groups of cellulose nano-whiskers and calcium ions of nano-hydroxyapatite. The nano-hydroxyapatite can distribute in the matrix of cellulose nano-whiskers. From the atomic force microscope (AFM) images, we can see that the diameter of the spherical nano-hydroxyapatite particles was about 20 nm.

  7. Aproximación genómica al diagnóstico genético de las distrofias hereditarias de retina y búsqueda de nuevos genes relacionados

    González del Pozo, María

    2014-01-01

    Diagnosticar genéticamente a las familias afectas de alguna de las distrofias hereditarias de retina (DHR) es, desde el punto de vista del genetista, una tarea ardua y complicada, si atendemos a la gran cantidad de genes y mutaciones reportados hasta la fecha. La gran heterogeneidad clínica y genética que caracteriza a este conjunto de enfermedades, es sin duda el mayor impedimento para su resolución genética. En este escenario, el empleo de herramientas cada vez más poderosas es indispensabl...

  8. Recent Development of Nano-Materials Used in DNA Biosensors

    Yibin Ying

    2009-07-01

    Full Text Available As knowledge of the structure and function of nucleic acid molecules has increased, sequence-specific DNA detection has gained increased importance. DNA biosensors based on nucleic acid hybridization have been actively developed because of their specificity, speed, portability, and low cost. Recently, there has been considerable interest in using nano-materials for DNA biosensors. Because of their high surface-to-volume ratios and excellent biological compatibilities, nano-materials could be used to increase the amount of DNA immobilization; moreover, DNA bound to nano-materials can maintain its biological activity. Alternatively, signal amplification by labeling a targeted analyte with nano-materials has also been reported for DNA biosensors in many papers. This review summarizes the applications of various nano-materials for DNA biosensors during past five years. We found that nano-materials of small sizes were advantageous as substrates for DNA attachment or as labels for signal amplification; and use of two or more types of nano-materials in the biosensors could improve their overall quality and to overcome the deficiencies of the individual nano-components. Most current DNA biosensors require the use of polymerase chain reaction (PCR in their protocols. However, further development of nano-materials with smaller size and/or with improved biological and chemical properties would substantially enhance the accuracy, selectivity and sensitivity of DNA biosensors. Thus, DNA biosensors without PCR amplification may become a reality in the foreseeable future.

  9. Nano-funnels as electro-osmotic ``tweezers and pistons''

    Wang, Yanqian; Panyukov, Sergey; Zhou, Jinsheng; Menard, Laurent D.; Ramsey, J. Michael; Rubinstien, Michael

    2014-03-01

    An electric field is used to force a DNA molecule into a nano-channel by compensating the free energy penalty that results from the reduced conformational entropy of the confined macromolecule. Narrow nano-channels require high critical electric fields to achieve DNA translocation, leading to short dwell times of DNA in these channels. We demonstrate that nano-funnels integrated with nano-channels reduce the free energy barrier and lower the critical electric field required for DNA translocation. A focused electric field within the funnel increases the electric force on the DNA, compresses the molecule, and increases the osmotic pressure at the nano-channel entrance. This ``electro-osmotic piston'' forces the molecule into the nano-channel at lower electric fields than those observed without the funnel. Appropirately designed nano-funnels can also function as tweezers that allow manipulation of the position of the DNA molecule. The predictions of our theory describing double-stranded DNA behavior in nano-funnel - nano-channel devices are consistent with experimental results. Thanks for the financial support from NSF (DMR-1309892, DMR-1121107, DMR-1122483), NIH (1-P50-HL107168, 1-P01-HL108808-01A1, R01HG02647), NHGRI and CF Foundation.

  10. Radiation synthesis of the nano-scale materials

    Yonghong, Ni; Zhicheng, Zhang; Xuewu, Ge; Xiangling, Xu [Department of Applied Chemistry, Univ. of Science and Technology of China, Hefei (China)

    2000-03-01

    Some recent research jobs on fabricating the nano-scale materials via {gamma}-irradiation in our laboratory are simply summarized in this paper. The main contents contain four aspects: (1) the preparation of metal alloy - powders; (2) the fabrication of polymer -metal nano-composites in aqueous solution, micro-emulsion and emulsion systems; (3) the synthesis of metal sulfide nano-particles and (4) the preparation of the ordered nano-structure materials. The corresponding preparation processes are also simply described. (author)

  11. Radiation synthesis of the nano-scale materials

    Ni Yonghong; Zhang Zhicheng; Ge Xuewu; Xu Xiangling

    2000-01-01

    Some recent research jobs on fabricating the nano-scale materials via γ-irradiation in our laboratory are simply summarized in this paper. The main contents contain four aspects: (1) the preparation of metal alloy - powders; (2) the fabrication of polymer -metal nano-composites in aqueous solution, micro-emulsion and emulsion systems; (3) the synthesis of metal sulfide nano-particles and (4) the preparation of the ordered nano-structure materials. The corresponding preparation processes are also simply described. (author)

  12. Template-assisted growth of nano structured functional materials

    Ying, K.K.; Nur Ubaidah Saidin; Khuan, N.I.; Suhaila Hani Ilias; Foo, C.T.

    2012-01-01

    Template-assisted growth is an important nano electrochemical deposition technique for synthesizing one-dimensional (1-D) nano structures with uniformly well-controlled shapes and sizes. A good template with well-defined dimensions is imperative for realizing this task. Porous anodic alumina (PAA) has been a favorable candidate for this purpose as it can be tailor-made with precise pore geometries, such as pore length and diameter as well as inter-pore distances, via the anodization of pure aluminium. This paper reports the fabrication of PAA templates and electrochemical synthesis of functional nano structures in the form of nano wires using PAA templates as scaffolds. Axial heterostructure and homogeneous nano wires formed by engineering materials configuration via composition and/ or layer thickness variations were fabricated for different functionalities. X-ray diffraction and imaging techniques were used to alucidate the microstructures, morphologies and chemical compositions of the nano wires produced. Due to their large surface area-to-volume ratios, and therefore high sensitivities, these functional nano structures have useful applications as critical components in nano sensor devices and various areas of nano technology. Potential applications include as hydrogen gas sensors in nuclear power plant for monitoring structural integrity of reactor components and containment building, as well as environmental monitoring of air pollution and leakages of toxic gases and chemicals. (Author)

  13. Anodic Aluminum Oxide Templates for Nano wires Array Fabrication

    Nur Ubaidah Saidin; Kok, K.Y.; Ng, I.K.

    2011-01-01

    This paper reports on the process developed to fabricate anodic aluminium oxide (AAO) templates suitable for the fabrication of nano wire arrays. Anodization process has been used to fabricate the AAO templates with pore diameters ranging from 15 nm to 30 nm. Electrodeposition of parallel arrays of high aspect ratio nickel nano wires were demonstrated using these fabricated AAO templates. The nano wires produced were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was found that the orientations of the electrodeposited nickel nano wires were governed by the deposition current and electrolyte conditions. (author)

  14. Preparation and characterization of PVC /ENR/CNTs Nano composites

    Ratnam, C.T.; Nur Azrini Ramlee; Keong, C.C.

    2011-01-01

    Poly (vinyl chloride), PVC/ epoxidized natural rubber blend, ENR/ carbon nano tubes, CNTs were prepared by using melt and solution blending methods. Addition of 2 phr of CNTs found to cause a drop in the tensile strength, Ts of the 50/ 50 PVC/ ENR blend. The nano composites prepared by the melt blending method exhibited higher values of Ts compared to the nano composites prepared by solution blending. Melt blending found to be an efficient method to prepare PVC/ ENR/ CNTs nano composites. (author)

  15. The nano-science of C sub 6 0 molecule

    Rafii-Tabar, H

    2002-01-01

    Over the past few years, nano-science and its associated nano-technology have emerged into prominence in research institutions across the world. They have brought about new scientific and engineering paradigms, allowing for the manipulation of single atoms and molecules, designing and fabricating new materials, atom-by-atom, and devices that operate on significantly reduced time and length scales. One important area of research in nano-science and nano technology is carbon-based physics in the form of fullerene physics. The C sub 6 0 molecule, and other cage-like fullerenes, together with carbon nano tubes provide objects that can be combined to generate three-dimensional functional structures for use in the anticipated nano-technology of future. The unique properties of C sub 6 0 can also be exploited in designing nano-phase thin films with applications in nano-scope device technology and processes such as nano-lithography. This requires a deep understanding of the highly complex process of adsorption of thi...

  16. Nano-based PCMs for building energy efficiency

    Biswas, Kaushik [ORNL

    2016-01-01

    Thermal storage using phase change materials (PCMs) is seen as a viable method for improving the energy efficiency of buildings. PCMs have been used in building applications in various forms PCM slurries in heat exchangers, macro- or microencapsulated PCMs in building envelopes, bulk PCM for modulating photovoltaic temperatures, etc. In the last decade a new class of PCMs, called nano-enhanced PCM (or nanoPCM), has been extensively investigated with the goal of improving the heat transfer and thermal storage properties of PCMs. NanoPCMs can primarily be categorized as nano-encapsulated PCMs and nanoparticle-PCM composites. The former are nano-sized capsules in which the PCM forms the core and is surrounded by a high-conductivity membrane or shell. The latter consist of PCM supported within nanostructures or nanoparticles dispersed in PCMs. This article reviews the current state of nanoPCM synthesis and characterization of their heat transfer and thermal storage properties. Further, a critical review of nanoPCM applications and their potential energy benefits is performed. Nano-enhanced PCMs exhibit higher thermal conductivities than regular PCM. However, whether the higher conductivity is desirable in all applications and if the property enhancements are worth the cost and effort needed to create nanoPCMs are questions that still need to be answered.

  17. Ge nano-layer fabricated by high-fluence low-energy ion implantation

    Lu Tiecheng; Dun Shaobo; Hu Qiang; Zhang Songbao; An Zhu; Duan Yanmin; Zhu Sha; Wei Qiangmin; Wang Lumin

    2006-01-01

    A Ge nano-layer embedded in the surface layer of an amorphous SiO 2 film was fabricated by high-fluence low-energy ion implantation. The component, phase, nano-structure and luminescence properties of the nano-layer were studied by means of Rutherford backscattering, glancing incident X-ray diffraction, laser Raman scattering, transmission electron microscopy and photoluminescence. The relation between nano-particle characteristics and ion fluence was also studied. The results indicate that nano-crystalline Ge and nano-amorphous Ge particles coexist in the nano-layer and the ratio of nano-crystalline Ge to nano-particle Ge increases with increasing ion fluence. The intensity of photoluminescence from the nano-layer increases with increasing ion fluence also. Prepared with certain ion fluences, high-density nano-layers composed of uniform-sized nano-particles can be observed

  18. Nano/macro porous bioactive glass scaffold

    Wang, Shaojie

    Bioactive glass (BG) and ceramics have been widely studied and developed as implants to replace hard tissues of the musculo-skeletal system, such as bones and teeth. Recently, instead of using bulk materials, which usually do not degrade rapidly enough and may remain in the human body for a long time, the idea of bioscaffold for tissue regeneration has generated much interest. An ideal bioscaffold is a porous material that would not only provide a three-dimensional structure for the regeneration of natural tissue, but also degrade gradually and, eventually be replaced by the natural tissue completely. Among various material choices the nano-macro dual porous BG appears as the most promising candidate for bioscaffold applications. Here macropores facilitate tissue growth while nanopores control degradation and enhance cell response. The surface area, which controls the degradation of scaffold can also be tuned by changing the nanopore size. However, fabrication of such 3D structure with desirable nano and macro pores has remained challenging. In this dissertation, sol-gel process combined with spinodal decomposition or polymer sponge replication method has been developed to fabricate the nano-macro porous BG scaffolds. Macropores up to 100microm are created by freezing polymer induced spinodal structure through sol-gel transition, while larger macropores (>200um) of predetermined size are obtained by the polymer sponge replication technique. The size of nanopores, which are inherent to the sol-gel method of glass fabrication, has been tailored using several approaches: Before gel point, small nanopores are generated using acid catalyst that leads to weakly-branched polymer-like network. On the other hand, larger nanopores are created with the base-catalyzed gel with highly-branched cluster-like structure. After the gel point, the nanostructure can be further modified by manipulating the sintering temperature and/or the ammonia concentration used in the solvent

  19. Não é ficção científica, é ciência : a genética e a biotecnologia em revista

    Daniela Ripoll

    2001-01-01

    A mídia tem-se ocupado com frequência, nos últimos anos, das "novidades" da genética e da biotecnologia. Textos de revistas, jornais, cartoons, fumes de Hollywood, propagandas de empresas e laboratórios, novelas de TV, talk shows, catálogos de venda de organismos, no telejornal noturno, em reportagens especiais, manchetes: a genética, a biotecnologia, a engenharia genética, a biologia molecular e as novas" genética molecular e genômica parecem ocupar uma posição de visibilidade e destaque sej...

  20. GenGIS 2: geospatial analysis of traditional and genetic biodiversity, with new gradient algorithms and an extensible plugin framework.

    Donovan H Parks

    Full Text Available GenGIS is free and open source software designed to integrate biodiversity data with a digital map and information about geography and habitat. While originally developed with microbial community analyses and phylogeography in mind, GenGIS has been applied to a wide range of datasets. A key feature of GenGIS is the ability to test geographic axes that can correspond to routes of migration or gradients that influence community similarity. Here we introduce GenGIS version 2, which extends the linear gradient tests introduced in the first version to allow comprehensive testing of all possible linear geographic axes. GenGIS v2 also includes a new plugin framework that supports the development and use of graphically driven analysis packages: initial plugins include implementations of linear regression and the Mantel test, calculations of alpha-diversity (e.g., Shannon Index for all samples, and geographic visualizations of dissimilarity matrices. We have also implemented a recently published method for biomonitoring reference condition analysis (RCA, which compares observed species richness and diversity to predicted values to determine whether a given site has been impacted. The newest version of GenGIS supports vector data in addition to raster files. We demonstrate the new features of GenGIS by performing a full gradient analysis of an Australian kangaroo apple data set, by using plugins and embedded statistical commands to analyze human microbiome sample data, and by applying RCA to a set of samples from Atlantic Canada. GenGIS release versions, tutorials and documentation are freely available at http://kiwi.cs.dal.ca/GenGIS, and source code is available at https://github.com/beiko-lab/gengis.